diff options
Diffstat (limited to 'arch/mips/boot/dts/qca')
-rw-r--r-- | arch/mips/boot/dts/qca/Makefile | 1 | ||||
-rw-r--r-- | arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts | 14 | ||||
-rw-r--r-- | arch/mips/boot/dts/qca/ar9331.dtsi | 122 | ||||
-rw-r--r-- | arch/mips/boot/dts/qca/ar9331_dpt_module.dts | 23 | ||||
-rw-r--r-- | arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts | 14 | ||||
-rw-r--r-- | arch/mips/boot/dts/qca/ar9331_omega.dts | 6 | ||||
-rw-r--r-- | arch/mips/boot/dts/qca/ar9331_openembed_som9331_board.dts | 108 | ||||
-rw-r--r-- | arch/mips/boot/dts/qca/ar9331_tl_mr3020.dts | 16 |
8 files changed, 268 insertions, 36 deletions
diff --git a/arch/mips/boot/dts/qca/Makefile b/arch/mips/boot/dts/qca/Makefile index 4451cf45b0ad..6749f77068a8 100644 --- a/arch/mips/boot/dts/qca/Makefile +++ b/arch/mips/boot/dts/qca/Makefile @@ -4,4 +4,5 @@ dtb-$(CONFIG_ATH79) += ar9132_tl_wr1043nd_v1.dtb dtb-$(CONFIG_ATH79) += ar9331_dpt_module.dtb dtb-$(CONFIG_ATH79) += ar9331_dragino_ms14.dtb dtb-$(CONFIG_ATH79) += ar9331_omega.dtb +dtb-$(CONFIG_ATH79) += ar9331_openembed_som9331_board.dtb dtb-$(CONFIG_ATH79) += ar9331_tl_mr3020.dtb diff --git a/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts b/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts index 7fccf6357225..f894fe17816b 100644 --- a/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts +++ b/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts @@ -23,17 +23,15 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - button@0 { + button-0 { label = "reset"; linux,code = <KEY_RESTART>; gpios = <&gpio 3 GPIO_ACTIVE_LOW>; debounce-interval = <60>; }; - button@1 { + button-1 { label = "qss"; linux,code = <KEY_WPS_BUTTON>; gpios = <&gpio 7 GPIO_ACTIVE_LOW>; @@ -43,23 +41,23 @@ leds { compatible = "gpio-leds"; - led@0 { + led-0 { label = "tp-link:green:usb"; gpios = <&gpio 1 GPIO_ACTIVE_LOW>; }; - led@1 { + led-1 { label = "tp-link:green:system"; gpios = <&gpio 2 GPIO_ACTIVE_LOW>; linux,default-trigger = "heartbeat"; }; - led@2 { + led-2 { label = "tp-link:green:qss"; gpios = <&gpio 5 GPIO_ACTIVE_HIGH>; }; - led@3 { + led-3 { label = "tp-link:green:wlan"; gpios = <&gpio 9 GPIO_ACTIVE_LOW>; }; diff --git a/arch/mips/boot/dts/qca/ar9331.dtsi b/arch/mips/boot/dts/qca/ar9331.dtsi index 5cfc9d347826..768ac0f869b1 100644 --- a/arch/mips/boot/dts/qca/ar9331.dtsi +++ b/arch/mips/boot/dts/qca/ar9331.dtsi @@ -59,7 +59,7 @@ #qca,ddr-wb-channel-cells = <1>; }; - uart: uart@18020000 { + uart: serial@18020000 { compatible = "qca,ar9330-uart"; reg = <0x18020000 0x14>; @@ -126,6 +126,9 @@ clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>; clock-names = "eth", "mdio"; + phy-mode = "mii"; + phy-handle = <&phy_port4>; + status = "disabled"; }; @@ -133,13 +136,128 @@ compatible = "qca,ar9330-eth"; reg = <0x1a000000 0x200>; interrupts = <5>; - resets = <&rst 13>, <&rst 23>; reset-names = "mac", "mdio"; clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>; clock-names = "eth", "mdio"; + phy-mode = "gmii"; + status = "disabled"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch10: switch@10 { + #address-cells = <1>; + #size-cells = <0>; + + compatible = "qca,ar9331-switch"; + reg = <0x10>; + resets = <&rst 8>; + reset-names = "switch"; + + interrupt-parent = <&miscintc>; + interrupts = <12>; + + interrupt-controller; + #interrupt-cells = <1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + switch_port0: port@0 { + reg = <0x0>; + ethernet = <ð1>; + + phy-mode = "gmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + + switch_port1: port@1 { + reg = <0x1>; + phy-handle = <&phy_port0>; + phy-mode = "internal"; + + status = "disabled"; + }; + + switch_port2: port@2 { + reg = <0x2>; + phy-handle = <&phy_port1>; + phy-mode = "internal"; + + status = "disabled"; + }; + + switch_port3: port@3 { + reg = <0x3>; + phy-handle = <&phy_port2>; + phy-mode = "internal"; + + status = "disabled"; + }; + + switch_port4: port@4 { + reg = <0x4>; + phy-handle = <&phy_port3>; + phy-mode = "internal"; + + status = "disabled"; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&switch10>; + + phy_port0: phy@0 { + reg = <0x0>; + interrupts = <0>; + status = "disabled"; + }; + + phy_port1: phy@1 { + reg = <0x1>; + interrupts = <0>; + status = "disabled"; + }; + + phy_port2: phy@2 { + reg = <0x2>; + interrupts = <0>; + status = "disabled"; + }; + + phy_port3: phy@3 { + reg = <0x3>; + interrupts = <0>; + status = "disabled"; + }; + + phy_port4: phy@4 { + reg = <0x4>; + interrupts = <0>; + status = "disabled"; + }; + }; + }; + }; }; usb: usb@1b000100 { diff --git a/arch/mips/boot/dts/qca/ar9331_dpt_module.dts b/arch/mips/boot/dts/qca/ar9331_dpt_module.dts index 77bab823eb3b..c857cd22f7db 100644 --- a/arch/mips/boot/dts/qca/ar9331_dpt_module.dts +++ b/arch/mips/boot/dts/qca/ar9331_dpt_module.dts @@ -3,6 +3,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> #include "ar9331.dtsi" @@ -22,8 +23,9 @@ leds { compatible = "gpio-leds"; - system { - label = "dpt-module:green:system"; + led-0 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; gpios = <&gpio 27 GPIO_ACTIVE_LOW>; default-state = "off"; }; @@ -31,10 +33,8 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - button@0 { + button-0 { label = "reset"; linux,code = <KEY_RESTART>; gpios = <&gpio 11 GPIO_ACTIVE_LOW>; @@ -84,3 +84,16 @@ ð1 { status = "okay"; }; + +&switch_port1 { + label = "lan0"; + status = "okay"; +}; + +&phy_port0 { + status = "okay"; +}; + +&phy_port4 { + status = "okay"; +}; diff --git a/arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts b/arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts index d38aa73f1a2e..7affa58d4fa6 100644 --- a/arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts +++ b/arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts @@ -22,25 +22,25 @@ leds { compatible = "gpio-leds"; - wlan { + led-wlan { label = "dragino2:red:wlan"; gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - lan { + led-lan { label = "dragino2:red:lan"; gpios = <&gpio 13 GPIO_ACTIVE_LOW>; default-state = "off"; }; - wan { + led-wan { label = "dragino2:red:wan"; gpios = <&gpio 17 GPIO_ACTIVE_LOW>; default-state = "off"; }; - system { + led-system { label = "dragino2:red:system"; gpios = <&gpio 28 GPIO_ACTIVE_HIGH>; default-state = "off"; @@ -49,16 +49,14 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - button@0 { + button-0 { label = "jumpstart"; linux,code = <KEY_WPS_BUTTON>; gpios = <&gpio 11 GPIO_ACTIVE_LOW>; }; - button@1 { + button-1 { label = "reset"; linux,code = <KEY_RESTART>; gpios = <&gpio 12 GPIO_ACTIVE_LOW>; diff --git a/arch/mips/boot/dts/qca/ar9331_omega.dts b/arch/mips/boot/dts/qca/ar9331_omega.dts index 11778abacf66..8904aa917a6e 100644 --- a/arch/mips/boot/dts/qca/ar9331_omega.dts +++ b/arch/mips/boot/dts/qca/ar9331_omega.dts @@ -22,7 +22,7 @@ leds { compatible = "gpio-leds"; - system { + led-system { label = "onion:amber:system"; gpios = <&gpio 27 GPIO_ACTIVE_LOW>; default-state = "off"; @@ -31,10 +31,8 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - button@0 { + button-0 { label = "reset"; linux,code = <KEY_RESTART>; gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; diff --git a/arch/mips/boot/dts/qca/ar9331_openembed_som9331_board.dts b/arch/mips/boot/dts/qca/ar9331_openembed_som9331_board.dts new file mode 100644 index 000000000000..dc65ebd60bbc --- /dev/null +++ b/arch/mips/boot/dts/qca/ar9331_openembed_som9331_board.dts @@ -0,0 +1,108 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +#include "ar9331.dtsi" + +/ { + model = "OpenEmbed SOM9331 Board"; + compatible = "openembed,som9331"; + + aliases { + serial0 = &uart; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x4000000>; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + gpios = <&gpio 27 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-0 { + label = "reset"; + linux,code = <KEY_RESTART>; + gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&ref { + clock-frequency = <25000000>; +}; + +&uart { + status = "okay"; +}; + +&gpio { + status = "okay"; +}; + +&usb { + dr_mode = "host"; + status = "okay"; +}; + +&usb_phy { + status = "okay"; +}; + +&spi { + num-chipselects = <1>; + status = "okay"; + + /* Winbond 25Q64FVSIG SPI flash */ + spiflash: w25q64@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "winbond,w25q64", "jedec,spi-nor"; + spi-max-frequency = <104000000>; + reg = <0>; + }; +}; + +ð0 { + status = "okay"; +}; + +ð1 { + status = "okay"; +}; + +&switch_port1 { + label = "lan0"; + status = "okay"; +}; + +&switch_port3 { + label = "lan1"; + status = "okay"; +}; + +&phy_port0 { + status = "okay"; +}; + +&phy_port2 { + status = "okay"; +}; + +&phy_port4 { + status = "okay"; +}; diff --git a/arch/mips/boot/dts/qca/ar9331_tl_mr3020.dts b/arch/mips/boot/dts/qca/ar9331_tl_mr3020.dts index c8290d36cfbe..10b9759228b7 100644 --- a/arch/mips/boot/dts/qca/ar9331_tl_mr3020.dts +++ b/arch/mips/boot/dts/qca/ar9331_tl_mr3020.dts @@ -22,25 +22,25 @@ leds { compatible = "gpio-leds"; - wlan { + led-wlan { label = "tp-link:green:wlan"; gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - lan { + led-lan { label = "tp-link:green:lan"; gpios = <&gpio 17 GPIO_ACTIVE_LOW>; default-state = "off"; }; - wps { + led-wps { label = "tp-link:green:wps"; gpios = <&gpio 26 GPIO_ACTIVE_LOW>; default-state = "off"; }; - led3g { + led-led3g { label = "tp-link:green:3g"; gpios = <&gpio 27 GPIO_ACTIVE_LOW>; default-state = "off"; @@ -49,22 +49,20 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - button@0 { + button-0 { label = "wps"; linux,code = <KEY_WPS_BUTTON>; gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; }; - button@1 { + button-1 { label = "sw1"; linux,code = <BTN_0>; gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; }; - button@2 { + button-2 { label = "sw2"; linux,code = <BTN_1>; gpios = <&gpio 20 GPIO_ACTIVE_HIGH>; |