summaryrefslogtreecommitdiff
path: root/arch/mips/cavium-octeon/executive/cvmx-spi.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/cavium-octeon/executive/cvmx-spi.c')
-rw-r--r--arch/mips/cavium-octeon/executive/cvmx-spi.c70
1 files changed, 35 insertions, 35 deletions
diff --git a/arch/mips/cavium-octeon/executive/cvmx-spi.c b/arch/mips/cavium-octeon/executive/cvmx-spi.c
index 74afb1710cd9..ef5198d13a0e 100644
--- a/arch/mips/cavium-octeon/executive/cvmx-spi.c
+++ b/arch/mips/cavium-octeon/executive/cvmx-spi.c
@@ -69,7 +69,7 @@ static cvmx_spi_callbacks_t cvmx_spi_callbacks = {
/**
* Get current SPI4 initialization callbacks
*
- * @callbacks: Pointer to the callbacks structure.to fill
+ * @callbacks: Pointer to the callbacks structure.to fill
*
* Returns Pointer to cvmx_spi_callbacks_t structure.
*/
@@ -92,11 +92,11 @@ void cvmx_spi_set_callbacks(cvmx_spi_callbacks_t *new_callbacks)
* Initialize and start the SPI interface.
*
* @interface: The identifier of the packet interface to configure and
- * use as a SPI interface.
+ * use as a SPI interface.
* @mode: The operating mode for the SPI interface. The interface
- * can operate as a full duplex (both Tx and Rx data paths
- * active) or as a halfplex (either the Tx data path is
- * active or the Rx data path is active, but not both).
+ * can operate as a full duplex (both Tx and Rx data paths
+ * active) or as a halfplex (either the Tx data path is
+ * active or the Rx data path is active, but not both).
* @timeout: Timeout to wait for clock synchronization in seconds
* @num_ports: Number of SPI ports to configure
*
@@ -138,11 +138,11 @@ int cvmx_spi_start_interface(int interface, cvmx_spi_mode_t mode, int timeout,
* with its correspondent system.
*
* @interface: The identifier of the packet interface to configure and
- * use as a SPI interface.
+ * use as a SPI interface.
* @mode: The operating mode for the SPI interface. The interface
- * can operate as a full duplex (both Tx and Rx data paths
- * active) or as a halfplex (either the Tx data path is
- * active or the Rx data path is active, but not both).
+ * can operate as a full duplex (both Tx and Rx data paths
+ * active) or as a halfplex (either the Tx data path is
+ * active or the Rx data path is active, but not both).
* @timeout: Timeout to wait for clock synchronization in seconds
*
* Returns Zero on success, negative of failure.
@@ -160,7 +160,7 @@ int cvmx_spi_restart_interface(int interface, cvmx_spi_mode_t mode, int timeout)
INVOKE_CB(cvmx_spi_callbacks.reset_cb, interface, mode);
/* NOTE: Calendar setup is not performed during restart */
- /* Refer to cvmx_spi_start_interface() for the full sequence */
+ /* Refer to cvmx_spi_start_interface() for the full sequence */
/* Callback to perform clock detection */
INVOKE_CB(cvmx_spi_callbacks.clock_detect_cb, interface, mode, timeout);
@@ -182,11 +182,11 @@ int cvmx_spi_restart_interface(int interface, cvmx_spi_mode_t mode, int timeout)
* Callback to perform SPI4 reset
*
* @interface: The identifier of the packet interface to configure and
- * use as a SPI interface.
+ * use as a SPI interface.
* @mode: The operating mode for the SPI interface. The interface
- * can operate as a full duplex (both Tx and Rx data paths
- * active) or as a halfplex (either the Tx data path is
- * active or the Rx data path is active, but not both).
+ * can operate as a full duplex (both Tx and Rx data paths
+ * active) or as a halfplex (either the Tx data path is
+ * active or the Rx data path is active, but not both).
*
* Returns Zero on success, non-zero error code on failure (will cause
* SPI initialization to abort)
@@ -297,11 +297,11 @@ int cvmx_spi_reset_cb(int interface, cvmx_spi_mode_t mode)
* Callback to setup calendar and miscellaneous settings before clock detection
*
* @interface: The identifier of the packet interface to configure and
- * use as a SPI interface.
+ * use as a SPI interface.
* @mode: The operating mode for the SPI interface. The interface
- * can operate as a full duplex (both Tx and Rx data paths
- * active) or as a halfplex (either the Tx data path is
- * active or the Rx data path is active, but not both).
+ * can operate as a full duplex (both Tx and Rx data paths
+ * active) or as a halfplex (either the Tx data path is
+ * active or the Rx data path is active, but not both).
* @num_ports: Number of ports to configure on SPI
*
* Returns Zero on success, non-zero error code on failure (will cause
@@ -382,7 +382,7 @@ int cvmx_spi_calendar_setup_cb(int interface, cvmx_spi_mode_t mode,
stxx_spi4_dat.u64 = 0;
/*Minimum needed by dynamic alignment */
stxx_spi4_dat.s.alpha = 32;
- stxx_spi4_dat.s.max_t = 0xFFFF; /*Minimum interval is 0x20 */
+ stxx_spi4_dat.s.max_t = 0xFFFF; /*Minimum interval is 0x20 */
cvmx_write_csr(CVMX_STXX_SPI4_DAT(interface),
stxx_spi4_dat.u64);
@@ -416,11 +416,11 @@ int cvmx_spi_calendar_setup_cb(int interface, cvmx_spi_mode_t mode,
* Callback to perform clock detection
*
* @interface: The identifier of the packet interface to configure and
- * use as a SPI interface.
+ * use as a SPI interface.
* @mode: The operating mode for the SPI interface. The interface
- * can operate as a full duplex (both Tx and Rx data paths
- * active) or as a halfplex (either the Tx data path is
- * active or the Rx data path is active, but not both).
+ * can operate as a full duplex (both Tx and Rx data paths
+ * active) or as a halfplex (either the Tx data path is
+ * active or the Rx data path is active, but not both).
* @timeout: Timeout to wait for clock synchronization in seconds
*
* Returns Zero on success, non-zero error code on failure (will cause
@@ -494,11 +494,11 @@ int cvmx_spi_clock_detect_cb(int interface, cvmx_spi_mode_t mode, int timeout)
* Callback to perform link training
*
* @interface: The identifier of the packet interface to configure and
- * use as a SPI interface.
+ * use as a SPI interface.
* @mode: The operating mode for the SPI interface. The interface
- * can operate as a full duplex (both Tx and Rx data paths
- * active) or as a halfplex (either the Tx data path is
- * active or the Rx data path is active, but not both).
+ * can operate as a full duplex (both Tx and Rx data paths
+ * active) or as a halfplex (either the Tx data path is
+ * active or the Rx data path is active, but not both).
* @timeout: Timeout to wait for link to be trained (in seconds)
*
* Returns Zero on success, non-zero error code on failure (will cause
@@ -563,11 +563,11 @@ int cvmx_spi_training_cb(int interface, cvmx_spi_mode_t mode, int timeout)
* Callback to perform calendar data synchronization
*
* @interface: The identifier of the packet interface to configure and
- * use as a SPI interface.
+ * use as a SPI interface.
* @mode: The operating mode for the SPI interface. The interface
- * can operate as a full duplex (both Tx and Rx data paths
- * active) or as a halfplex (either the Tx data path is
- * active or the Rx data path is active, but not both).
+ * can operate as a full duplex (both Tx and Rx data paths
+ * active) or as a halfplex (either the Tx data path is
+ * active or the Rx data path is active, but not both).
* @timeout: Timeout to wait for calendar data in seconds
*
* Returns Zero on success, non-zero error code on failure (will cause
@@ -620,11 +620,11 @@ int cvmx_spi_calendar_sync_cb(int interface, cvmx_spi_mode_t mode, int timeout)
* Callback to handle interface up
*
* @interface: The identifier of the packet interface to configure and
- * use as a SPI interface.
+ * use as a SPI interface.
* @mode: The operating mode for the SPI interface. The interface
- * can operate as a full duplex (both Tx and Rx data paths
- * active) or as a halfplex (either the Tx data path is
- * active or the Rx data path is active, but not both).
+ * can operate as a full duplex (both Tx and Rx data paths
+ * active) or as a halfplex (either the Tx data path is
+ * active or the Rx data path is active, but not both).
*
* Returns Zero on success, non-zero error code on failure (will cause
* SPI initialization to abort)