summaryrefslogtreecommitdiff
path: root/arch/mips/include/asm/sn/addrs.h
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/include/asm/sn/addrs.h')
-rw-r--r--arch/mips/include/asm/sn/addrs.h54
1 files changed, 27 insertions, 27 deletions
diff --git a/arch/mips/include/asm/sn/addrs.h b/arch/mips/include/asm/sn/addrs.h
index 2367b56dcdef..66814f8ba8e8 100644
--- a/arch/mips/include/asm/sn/addrs.h
+++ b/arch/mips/include/asm/sn/addrs.h
@@ -88,8 +88,8 @@
#define SWIN_SIZE_BITS 24
#define SWIN_SIZE (UINT64_CAST 1 << 24)
-#define SWIN_SIZEMASK (SWIN_SIZE - 1)
-#define SWIN_WIDGET_MASK 0xF
+#define SWIN_SIZEMASK (SWIN_SIZE - 1)
+#define SWIN_WIDGET_MASK 0xF
/*
* Convert smallwindow address to xtalk address.
@@ -97,8 +97,8 @@
* 'addr' can be physical or virtual address, but will be converted
* to Xtalk address in the range 0 -> SWINZ_SIZEMASK
*/
-#define SWIN_WIDGETADDR(addr) ((addr) & SWIN_SIZEMASK)
-#define SWIN_WIDGETNUM(addr) (((addr) >> SWIN_SIZE_BITS) & SWIN_WIDGET_MASK)
+#define SWIN_WIDGETADDR(addr) ((addr) & SWIN_SIZEMASK)
+#define SWIN_WIDGETNUM(addr) (((addr) >> SWIN_SIZE_BITS) & SWIN_WIDGET_MASK)
/*
* Verify if addr belongs to small window address on node with "nasid"
*
@@ -108,7 +108,7 @@
*
*
*/
-#define NODE_SWIN_ADDR(nasid, addr) \
+#define NODE_SWIN_ADDR(nasid, addr) \
(((addr) >= NODE_SWIN_BASE(nasid, 0)) && \
((addr) < (NODE_SWIN_BASE(nasid, HUB_NUM_WIDGET) + SWIN_SIZE)\
))
@@ -150,7 +150,7 @@
#endif
-#define HUB_REGISTER_WIDGET 1
+#define HUB_REGISTER_WIDGET 1
#define IALIAS_BASE NODE_SWIN_BASE(0, HUB_REGISTER_WIDGET)
#define IALIAS_SIZE 0x800000 /* 8 Megabytes */
#define IS_IALIAS(_a) (((_a) >= IALIAS_BASE) && \
@@ -174,16 +174,16 @@
* WARNING: They won't work in assembler.
*
* BDDIR_ENTRY_LO returns the address of the low double-word of the dir
- * entry corresponding to a physical (Cac or Uncac) address.
+ * entry corresponding to a physical (Cac or Uncac) address.
* BDDIR_ENTRY_HI returns the address of the high double-word of the entry.
* BDPRT_ENTRY returns the address of the double-word protection entry
- * corresponding to the page containing the physical address.
+ * corresponding to the page containing the physical address.
* BDPRT_ENTRY_S Stores the value into the protection entry.
* BDPRT_ENTRY_L Load the value from the protection entry.
* BDECC_ENTRY returns the address of the ECC byte corresponding to a
- * double-word at a specified physical address.
+ * double-word at a specified physical address.
* BDECC_ENTRY_H returns the address of the two ECC bytes corresponding to a
- * quad-word at a specified physical address.
+ * quad-word at a specified physical address.
*/
#define NODE_BDOOR_BASE(_n) (NODE_HSPEC_BASE(_n) + (NODE_ADDRSPACE_SIZE/2))
@@ -226,11 +226,11 @@
#define BDADDR_IS_DIR(_ba) ((UINT64_CAST (_ba) & 0x200) != 0)
#define BDADDR_IS_PRT(_ba) ((UINT64_CAST (_ba) & 0x200) == 0)
-#define BDDIR_TO_MEM(_ba) (UINT64_CAST (_ba) & NASID_MASK | \
+#define BDDIR_TO_MEM(_ba) (UINT64_CAST (_ba) & NASID_MASK | \
(UINT64_CAST(_ba) & BDDIR_UPPER_MASK)<<2 | \
(UINT64_CAST(_ba) & 0x1f << 4) << 3)
-#define BDPRT_TO_MEM(_ba) (UINT64_CAST (_ba) & NASID_MASK | \
+#define BDPRT_TO_MEM(_ba) (UINT64_CAST (_ba) & NASID_MASK | \
(UINT64_CAST(_ba) & BDDIR_UPPER_MASK)<<2)
#define BDECC_TO_MEM(_ba) (UINT64_CAST (_ba) & NASID_MASK | \
@@ -251,23 +251,23 @@
/*
* WARNING:
* When certain Hub chip workaround are defined, it's not sufficient
- * to dereference the *_HUB_ADDR() macros. You should instead use
+ * to dereference the *_HUB_ADDR() macros. You should instead use
* HUB_L() and HUB_S() if you must deal with pointers to hub registers.
* Otherwise, the recommended approach is to use *_HUB_L() and *_HUB_S().
* They're always safe.
*/
#define LOCAL_HUB_ADDR(_x) (HUBREG_CAST (IALIAS_BASE + (_x)))
-#define REMOTE_HUB_ADDR(_n, _x) (HUBREG_CAST (NODE_SWIN_BASE(_n, 1) + \
+#define REMOTE_HUB_ADDR(_n, _x) (HUBREG_CAST (NODE_SWIN_BASE(_n, 1) + \
0x800000 + (_x)))
#ifdef CONFIG_SGI_IP27
-#define REMOTE_HUB_PI_ADDR(_n, _sn, _x) (HUBREG_CAST (NODE_SWIN_BASE(_n, 1) + \
+#define REMOTE_HUB_PI_ADDR(_n, _sn, _x) (HUBREG_CAST (NODE_SWIN_BASE(_n, 1) + \
0x800000 + (_x)))
#endif /* CONFIG_SGI_IP27 */
#ifndef __ASSEMBLY__
#define HUB_L(_a) *(_a)
-#define HUB_S(_a, _d) *(_a) = (_d)
+#define HUB_S(_a, _d) *(_a) = (_d)
#define LOCAL_HUB_L(_r) HUB_L(LOCAL_HUB_ADDR(_r))
#define LOCAL_HUB_S(_r, _d) HUB_S(LOCAL_HUB_ADDR(_r), (_d))
@@ -330,14 +330,14 @@
#define KLI_LAUNCH 0 /* Dir. entries */
#define KLI_KLCONFIG 1
-#define KLI_NMI 2
+#define KLI_NMI 2
#define KLI_GDA 3
#define KLI_FREEMEM 4
-#define KLI_SYMMON_STK 5
+#define KLI_SYMMON_STK 5
#define KLI_PI_ERROR 6
#define KLI_KERN_VARS 7
-#define KLI_KERN_XP 8
-#define KLI_KERN_PARTID 9
+#define KLI_KERN_XP 8
+#define KLI_KERN_PARTID 9
#ifndef __ASSEMBLY__
@@ -350,8 +350,8 @@
#define KLD_SYMMON_STK(nasid) (KLD_BASE(nasid) + KLI_SYMMON_STK)
#define KLD_FREEMEM(nasid) (KLD_BASE(nasid) + KLI_FREEMEM)
#define KLD_KERN_VARS(nasid) (KLD_BASE(nasid) + KLI_KERN_VARS)
-#define KLD_KERN_XP(nasid) (KLD_BASE(nasid) + KLI_KERN_XP)
-#define KLD_KERN_PARTID(nasid) (KLD_BASE(nasid) + KLI_KERN_PARTID)
+#define KLD_KERN_XP(nasid) (KLD_BASE(nasid) + KLI_KERN_XP)
+#define KLD_KERN_PARTID(nasid) (KLD_BASE(nasid) + KLI_KERN_PARTID)
#define LAUNCH_OFFSET(nasid, slice) \
(KLD_LAUNCH(nasid)->offset + \
@@ -365,7 +365,7 @@
KLD_NMI(nasid)->stride * (slice))
#define NMI_ADDR(nasid, slice) \
TO_NODE_UNCAC((nasid), SN_NMI_OFFSET(nasid, slice))
-#define NMI_SIZE(nasid) KLD_NMI(nasid)->size
+#define NMI_SIZE(nasid) KLD_NMI(nasid)->size
#define KLCONFIG_OFFSET(nasid) KLD_KLCONFIG(nasid)->offset
#define KLCONFIG_ADDR(nasid) \
@@ -390,8 +390,8 @@
/* loading symmon 4k below UNIX. the arcs loader needs the topaddr for a
* relocatable program
*/
-#define UNIX_DEBUG_LOADADDR 0x300000
-#define SYMMON_LOADADDR(nasid) \
+#define UNIX_DEBUG_LOADADDR 0x300000
+#define SYMMON_LOADADDR(nasid) \
TO_NODE(nasid, PHYS_TO_K0(UNIX_DEBUG_LOADADDR - 0x1000))
#define FREEMEM_OFFSET(nasid) KLD_FREEMEM(nasid)->offset
@@ -420,8 +420,8 @@
#define KERN_VARS_ADDR(nasid) KLD_KERN_VARS(nasid)->pointer
#define KERN_VARS_SIZE(nasid) KLD_KERN_VARS(nasid)->size
-#define KERN_XP_ADDR(nasid) KLD_KERN_XP(nasid)->pointer
-#define KERN_XP_SIZE(nasid) KLD_KERN_XP(nasid)->size
+#define KERN_XP_ADDR(nasid) KLD_KERN_XP(nasid)->pointer
+#define KERN_XP_SIZE(nasid) KLD_KERN_XP(nasid)->size
#define GPDA_ADDR(nasid) TO_NODE_CAC(nasid, GPDA_OFFSET)