diff options
Diffstat (limited to 'arch/mips/include/uapi/asm/termbits.h')
| -rw-r--r-- | arch/mips/include/uapi/asm/termbits.h | 249 |
1 files changed, 99 insertions, 150 deletions
diff --git a/arch/mips/include/uapi/asm/termbits.h b/arch/mips/include/uapi/asm/termbits.h index dfeffba729b7..1eb60903d6f0 100644 --- a/arch/mips/include/uapi/asm/termbits.h +++ b/arch/mips/include/uapi/asm/termbits.h @@ -11,11 +11,9 @@ #ifndef _ASM_TERMBITS_H #define _ASM_TERMBITS_H -#include <linux/posix_types.h> +#include <asm-generic/termbits-common.h> -typedef unsigned char cc_t; -typedef unsigned int speed_t; -typedef unsigned int tcflag_t; +typedef unsigned int tcflag_t; /* * The ABI says nothing about NCC but seems to use NCCS as @@ -54,175 +52,126 @@ struct ktermios { }; /* c_cc characters */ -#define VINTR 0 /* Interrupt character [ISIG]. */ -#define VQUIT 1 /* Quit character [ISIG]. */ -#define VERASE 2 /* Erase character [ICANON]. */ -#define VKILL 3 /* Kill-line character [ICANON]. */ -#define VMIN 4 /* Minimum number of bytes read at once [!ICANON]. */ -#define VTIME 5 /* Time-out value (tenths of a second) [!ICANON]. */ -#define VEOL2 6 /* Second EOL character [ICANON]. */ +#define VINTR 0 /* Interrupt character [ISIG] */ +#define VQUIT 1 /* Quit character [ISIG] */ +#define VERASE 2 /* Erase character [ICANON] */ +#define VKILL 3 /* Kill-line character [ICANON] */ +#define VMIN 4 /* Minimum number of bytes read at once [!ICANON] */ +#define VTIME 5 /* Time-out value (tenths of a second) [!ICANON] */ +#define VEOL2 6 /* Second EOL character [ICANON] */ #define VSWTC 7 /* ??? */ #define VSWTCH VSWTC -#define VSTART 8 /* Start (X-ON) character [IXON, IXOFF]. */ -#define VSTOP 9 /* Stop (X-OFF) character [IXON, IXOFF]. */ -#define VSUSP 10 /* Suspend character [ISIG]. */ +#define VSTART 8 /* Start (X-ON) character [IXON, IXOFF] */ +#define VSTOP 9 /* Stop (X-OFF) character [IXON, IXOFF] */ +#define VSUSP 10 /* Suspend character [ISIG] */ #if 0 /* * VDSUSP is not supported */ -#define VDSUSP 11 /* Delayed suspend character [ISIG]. */ +#define VDSUSP 11 /* Delayed suspend character [ISIG] */ #endif -#define VREPRINT 12 /* Reprint-line character [ICANON]. */ -#define VDISCARD 13 /* Discard character [IEXTEN]. */ -#define VWERASE 14 /* Word-erase character [ICANON]. */ -#define VLNEXT 15 /* Literal-next character [IEXTEN]. */ -#define VEOF 16 /* End-of-file character [ICANON]. */ -#define VEOL 17 /* End-of-line character [ICANON]. */ +#define VREPRINT 12 /* Reprint-line character [ICANON] */ +#define VDISCARD 13 /* Discard character [IEXTEN] */ +#define VWERASE 14 /* Word-erase character [ICANON] */ +#define VLNEXT 15 /* Literal-next character [IEXTEN] */ +#define VEOF 16 /* End-of-file character [ICANON] */ +#define VEOL 17 /* End-of-line character [ICANON] */ /* c_iflag bits */ -#define IGNBRK 0000001 /* Ignore break condition. */ -#define BRKINT 0000002 /* Signal interrupt on break. */ -#define IGNPAR 0000004 /* Ignore characters with parity errors. */ -#define PARMRK 0000010 /* Mark parity and framing errors. */ -#define INPCK 0000020 /* Enable input parity check. */ -#define ISTRIP 0000040 /* Strip 8th bit off characters. */ -#define INLCR 0000100 /* Map NL to CR on input. */ -#define IGNCR 0000200 /* Ignore CR. */ -#define ICRNL 0000400 /* Map CR to NL on input. */ -#define IUCLC 0001000 /* Map upper case to lower case on input. */ -#define IXON 0002000 /* Enable start/stop output control. */ -#define IXANY 0004000 /* Any character will restart after stop. */ -#define IXOFF 0010000 /* Enable start/stop input control. */ -#define IMAXBEL 0020000 /* Ring bell when input queue is full. */ -#define IUTF8 0040000 /* Input is UTF-8 */ +#define IUCLC 0x0200 /* Map upper case to lower case on input */ +#define IXON 0x0400 /* Enable start/stop output control */ +#define IXOFF 0x1000 /* Enable start/stop input control */ +#define IMAXBEL 0x2000 /* Ring bell when input queue is full */ +#define IUTF8 0x4000 /* Input is UTF-8 */ /* c_oflag bits */ -#define OPOST 0000001 /* Perform output processing. */ -#define OLCUC 0000002 /* Map lower case to upper case on output. */ -#define ONLCR 0000004 /* Map NL to CR-NL on output. */ -#define OCRNL 0000010 -#define ONOCR 0000020 -#define ONLRET 0000040 -#define OFILL 0000100 -#define OFDEL 0000200 -#define NLDLY 0000400 -#define NL0 0000000 -#define NL1 0000400 -#define CRDLY 0003000 -#define CR0 0000000 -#define CR1 0001000 -#define CR2 0002000 -#define CR3 0003000 -#define TABDLY 0014000 -#define TAB0 0000000 -#define TAB1 0004000 -#define TAB2 0010000 -#define TAB3 0014000 -#define XTABS 0014000 -#define BSDLY 0020000 -#define BS0 0000000 -#define BS1 0020000 -#define VTDLY 0040000 -#define VT0 0000000 -#define VT1 0040000 -#define FFDLY 0100000 -#define FF0 0000000 -#define FF1 0100000 +#define OLCUC 0x00002 /* Map lower case to upper case on output */ +#define ONLCR 0x00004 /* Map NL to CR-NL on output */ +#define NLDLY 0x00100 +#define NL0 0x00000 +#define NL1 0x00100 +#define CRDLY 0x00600 +#define CR0 0x00000 +#define CR1 0x00200 +#define CR2 0x00400 +#define CR3 0x00600 +#define TABDLY 0x01800 +#define TAB0 0x00000 +#define TAB1 0x00800 +#define TAB2 0x01000 +#define TAB3 0x01800 +#define XTABS 0x01800 +#define BSDLY 0x02000 +#define BS0 0x00000 +#define BS1 0x02000 +#define VTDLY 0x04000 +#define VT0 0x00000 +#define VT1 0x04000 +#define FFDLY 0x08000 +#define FF0 0x00000 +#define FF1 0x08000 /* #define PAGEOUT ??? #define WRAP ??? */ /* c_cflag bit meaning */ -#define CBAUD 0010017 -#define B0 0000000 /* hang up */ -#define B50 0000001 -#define B75 0000002 -#define B110 0000003 -#define B134 0000004 -#define B150 0000005 -#define B200 0000006 -#define B300 0000007 -#define B600 0000010 -#define B1200 0000011 -#define B1800 0000012 -#define B2400 0000013 -#define B4800 0000014 -#define B9600 0000015 -#define B19200 0000016 -#define B38400 0000017 -#define EXTA B19200 -#define EXTB B38400 -#define CSIZE 0000060 /* Number of bits per byte (mask). */ -#define CS5 0000000 /* 5 bits per byte. */ -#define CS6 0000020 /* 6 bits per byte. */ -#define CS7 0000040 /* 7 bits per byte. */ -#define CS8 0000060 /* 8 bits per byte. */ -#define CSTOPB 0000100 /* Two stop bits instead of one. */ -#define CREAD 0000200 /* Enable receiver. */ -#define PARENB 0000400 /* Parity enable. */ -#define PARODD 0001000 /* Odd parity instead of even. */ -#define HUPCL 0002000 /* Hang up on last close. */ -#define CLOCAL 0004000 /* Ignore modem status lines. */ -#define CBAUDEX 0010000 -#define BOTHER 0010000 -#define B57600 0010001 -#define B115200 0010002 -#define B230400 0010003 -#define B460800 0010004 -#define B500000 0010005 -#define B576000 0010006 -#define B921600 0010007 -#define B1000000 0010010 -#define B1152000 0010011 -#define B1500000 0010012 -#define B2000000 0010013 -#define B2500000 0010014 -#define B3000000 0010015 -#define B3500000 0010016 -#define B4000000 0010017 -#define CIBAUD 002003600000 /* input baud rate */ -#define CMSPAR 010000000000 /* mark or space (stick) parity */ -#define CRTSCTS 020000000000 /* flow control */ - -#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ +#define CBAUD 0x0000100f +#define CSIZE 0x00000030 /* Number of bits per byte (mask) */ +#define CS5 0x00000000 /* 5 bits per byte */ +#define CS6 0x00000010 /* 6 bits per byte */ +#define CS7 0x00000020 /* 7 bits per byte */ +#define CS8 0x00000030 /* 8 bits per byte */ +#define CSTOPB 0x00000040 /* Two stop bits instead of one */ +#define CREAD 0x00000080 /* Enable receiver */ +#define PARENB 0x00000100 /* Parity enable */ +#define PARODD 0x00000200 /* Odd parity instead of even */ +#define HUPCL 0x00000400 /* Hang up on last close */ +#define CLOCAL 0x00000800 /* Ignore modem status lines */ +#define CBAUDEX 0x00001000 +#define BOTHER 0x00001000 +#define B57600 0x00001001 +#define B115200 0x00001002 +#define B230400 0x00001003 +#define B460800 0x00001004 +#define B500000 0x00001005 +#define B576000 0x00001006 +#define B921600 0x00001007 +#define B1000000 0x00001008 +#define B1152000 0x00001009 +#define B1500000 0x0000100a +#define B2000000 0x0000100b +#define B2500000 0x0000100c +#define B3000000 0x0000100d +#define B3500000 0x0000100e +#define B4000000 0x0000100f +#define CIBAUD 0x100f0000 /* input baud rate */ /* c_lflag bits */ -#define ISIG 0000001 /* Enable signals. */ -#define ICANON 0000002 /* Do erase and kill processing. */ -#define XCASE 0000004 -#define ECHO 0000010 /* Enable echo. */ -#define ECHOE 0000020 /* Visual erase for ERASE. */ -#define ECHOK 0000040 /* Echo NL after KILL. */ -#define ECHONL 0000100 /* Echo NL even if ECHO is off. */ -#define NOFLSH 0000200 /* Disable flush after interrupt. */ -#define IEXTEN 0000400 /* Enable DISCARD and LNEXT. */ -#define ECHOCTL 0001000 /* Echo control characters as ^X. */ -#define ECHOPRT 0002000 /* Hardcopy visual erase. */ -#define ECHOKE 0004000 /* Visual erase for KILL. */ -#define FLUSHO 0020000 -#define PENDIN 0040000 /* Retype pending input (state). */ -#define TOSTOP 0100000 /* Send SIGTTOU for background output. */ -#define ITOSTOP TOSTOP -#define EXTPROC 0200000 /* External processing on pty */ +#define ISIG 0x00001 /* Enable signals */ +#define ICANON 0x00002 /* Do erase and kill processing */ +#define XCASE 0x00004 +#define ECHO 0x00008 /* Enable echo */ +#define ECHOE 0x00010 /* Visual erase for ERASE */ +#define ECHOK 0x00020 /* Echo NL after KILL */ +#define ECHONL 0x00040 /* Echo NL even if ECHO is off */ +#define NOFLSH 0x00080 /* Disable flush after interrupt */ +#define IEXTEN 0x00100 /* Enable DISCARD and LNEXT */ +#define ECHOCTL 0x00200 /* Echo control characters as ^X */ +#define ECHOPRT 0x00400 /* Hardcopy visual erase */ +#define ECHOKE 0x00800 /* Visual erase for KILL */ +#define FLUSHO 0x02000 +#define PENDIN 0x04000 /* Retype pending input (state) */ +#define TOSTOP 0x08000 /* Send SIGTTOU for background output */ +#define ITOSTOP TOSTOP +#define EXTPROC 0x10000 /* External processing on pty */ /* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ #define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ -/* tcflow() and TCXONC use these */ -#define TCOOFF 0 /* Suspend output. */ -#define TCOON 1 /* Restart suspended output. */ -#define TCIOFF 2 /* Send a STOP character. */ -#define TCION 3 /* Send a START character. */ - -/* tcflush() and TCFLSH use these */ -#define TCIFLUSH 0 /* Discard data received but not yet read. */ -#define TCOFLUSH 1 /* Discard data written but not yet sent. */ -#define TCIOFLUSH 2 /* Discard all pending data. */ - /* tcsetattr uses these */ -#define TCSANOW TCSETS /* Change immediately. */ -#define TCSADRAIN TCSETSW /* Change when pending output is written. */ -#define TCSAFLUSH TCSETSF /* Flush pending input before changing. */ +#define TCSANOW TCSETS /* Change immediately */ +#define TCSADRAIN TCSETSW /* Change when pending output is written */ +#define TCSAFLUSH TCSETSF /* Flush pending input before changing */ #endif /* _ASM_TERMBITS_H */ |