summaryrefslogtreecommitdiff
path: root/arch/mips/kernel/smtc.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/kernel/smtc.c')
-rw-r--r--arch/mips/kernel/smtc.c1528
1 files changed, 0 insertions, 1528 deletions
diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c
deleted file mode 100644
index c1681d65dd5c..000000000000
--- a/arch/mips/kernel/smtc.c
+++ /dev/null
@@ -1,1528 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- * Copyright (C) 2004 Mips Technologies, Inc
- * Copyright (C) 2008 Kevin D. Kissell
- */
-
-#include <linux/clockchips.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/smp.h>
-#include <linux/cpumask.h>
-#include <linux/interrupt.h>
-#include <linux/kernel_stat.h>
-#include <linux/module.h>
-#include <linux/ftrace.h>
-#include <linux/slab.h>
-
-#include <asm/cpu.h>
-#include <asm/processor.h>
-#include <linux/atomic.h>
-#include <asm/hardirq.h>
-#include <asm/hazards.h>
-#include <asm/irq.h>
-#include <asm/idle.h>
-#include <asm/mmu_context.h>
-#include <asm/mipsregs.h>
-#include <asm/cacheflush.h>
-#include <asm/time.h>
-#include <asm/addrspace.h>
-#include <asm/smtc.h>
-#include <asm/smtc_proc.h>
-#include <asm/setup.h>
-
-/*
- * SMTC Kernel needs to manipulate low-level CPU interrupt mask
- * in do_IRQ. These are passed in setup_irq_smtc() and stored
- * in this table.
- */
-unsigned long irq_hwmask[NR_IRQS];
-
-#define LOCK_MT_PRA() \
- local_irq_save(flags); \
- mtflags = dmt()
-
-#define UNLOCK_MT_PRA() \
- emt(mtflags); \
- local_irq_restore(flags)
-
-#define LOCK_CORE_PRA() \
- local_irq_save(flags); \
- mtflags = dvpe()
-
-#define UNLOCK_CORE_PRA() \
- evpe(mtflags); \
- local_irq_restore(flags)
-
-/*
- * Data structures purely associated with SMTC parallelism
- */
-
-
-/*
- * Table for tracking ASIDs whose lifetime is prolonged.
- */
-
-asiduse smtc_live_asid[MAX_SMTC_TLBS][MAX_SMTC_ASIDS];
-
-/*
- * Number of InterProcessor Interrupt (IPI) message buffers to allocate
- */
-
-#define IPIBUF_PER_CPU 4
-
-struct smtc_ipi_q IPIQ[NR_CPUS];
-static struct smtc_ipi_q freeIPIq;
-
-
-/*
- * Number of FPU contexts for each VPE
- */
-
-static int smtc_nconf1[MAX_SMTC_VPES];
-
-
-/* Forward declarations */
-
-void ipi_decode(struct smtc_ipi *);
-static void post_direct_ipi(int cpu, struct smtc_ipi *pipi);
-static void setup_cross_vpe_interrupts(unsigned int nvpe);
-void init_smtc_stats(void);
-
-/* Global SMTC Status */
-
-unsigned int smtc_status;
-
-/* Boot command line configuration overrides */
-
-static int vpe0limit;
-static int ipibuffers;
-static int nostlb;
-static int asidmask;
-unsigned long smtc_asid_mask = 0xff;
-
-static int __init vpe0tcs(char *str)
-{
- get_option(&str, &vpe0limit);
-
- return 1;
-}
-
-static int __init ipibufs(char *str)
-{
- get_option(&str, &ipibuffers);
- return 1;
-}
-
-static int __init stlb_disable(char *s)
-{
- nostlb = 1;
- return 1;
-}
-
-static int __init asidmask_set(char *str)
-{
- get_option(&str, &asidmask);
- switch (asidmask) {
- case 0x1:
- case 0x3:
- case 0x7:
- case 0xf:
- case 0x1f:
- case 0x3f:
- case 0x7f:
- case 0xff:
- smtc_asid_mask = (unsigned long)asidmask;
- break;
- default:
- printk("ILLEGAL ASID mask 0x%x from command line\n", asidmask);
- }
- return 1;
-}
-
-__setup("vpe0tcs=", vpe0tcs);
-__setup("ipibufs=", ipibufs);
-__setup("nostlb", stlb_disable);
-__setup("asidmask=", asidmask_set);
-
-#ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG
-
-static int hang_trig;
-
-static int __init hangtrig_enable(char *s)
-{
- hang_trig = 1;
- return 1;
-}
-
-
-__setup("hangtrig", hangtrig_enable);
-
-#define DEFAULT_BLOCKED_IPI_LIMIT 32
-
-static int timerq_limit = DEFAULT_BLOCKED_IPI_LIMIT;
-
-static int __init tintq(char *str)
-{
- get_option(&str, &timerq_limit);
- return 1;
-}
-
-__setup("tintq=", tintq);
-
-static int imstuckcount[MAX_SMTC_VPES][8];
-/* vpemask represents IM/IE bits of per-VPE Status registers, low-to-high */
-static int vpemask[MAX_SMTC_VPES][8] = {
- {0, 0, 1, 0, 0, 0, 0, 1},
- {0, 0, 0, 0, 0, 0, 0, 1}
-};
-int tcnoprog[NR_CPUS];
-static atomic_t idle_hook_initialized = ATOMIC_INIT(0);
-static int clock_hang_reported[NR_CPUS];
-
-#endif /* CONFIG_SMTC_IDLE_HOOK_DEBUG */
-
-/*
- * Configure shared TLB - VPC configuration bit must be set by caller
- */
-
-static void smtc_configure_tlb(void)
-{
- int i, tlbsiz, vpes;
- unsigned long mvpconf0;
- unsigned long config1val;
-
- /* Set up ASID preservation table */
- for (vpes=0; vpes<MAX_SMTC_TLBS; vpes++) {
- for(i = 0; i < MAX_SMTC_ASIDS; i++) {
- smtc_live_asid[vpes][i] = 0;
- }
- }
- mvpconf0 = read_c0_mvpconf0();
-
- if ((vpes = ((mvpconf0 & MVPCONF0_PVPE)
- >> MVPCONF0_PVPE_SHIFT) + 1) > 1) {
- /* If we have multiple VPEs, try to share the TLB */
- if ((mvpconf0 & MVPCONF0_TLBS) && !nostlb) {
- /*
- * If TLB sizing is programmable, shared TLB
- * size is the total available complement.
- * Otherwise, we have to take the sum of all
- * static VPE TLB entries.
- */
- if ((tlbsiz = ((mvpconf0 & MVPCONF0_PTLBE)
- >> MVPCONF0_PTLBE_SHIFT)) == 0) {
- /*
- * If there's more than one VPE, there had better
- * be more than one TC, because we need one to bind
- * to each VPE in turn to be able to read
- * its configuration state!
- */
- settc(1);
- /* Stop the TC from doing anything foolish */
- write_tc_c0_tchalt(TCHALT_H);
- mips_ihb();
- /* No need to un-Halt - that happens later anyway */
- for (i=0; i < vpes; i++) {
- write_tc_c0_tcbind(i);
- /*
- * To be 100% sure we're really getting the right
- * information, we exit the configuration state
- * and do an IHB after each rebinding.
- */
- write_c0_mvpcontrol(
- read_c0_mvpcontrol() & ~ MVPCONTROL_VPC );
- mips_ihb();
- /*
- * Only count if the MMU Type indicated is TLB
- */
- if (((read_vpe_c0_config() & MIPS_CONF_MT) >> 7) == 1) {
- config1val = read_vpe_c0_config1();
- tlbsiz += ((config1val >> 25) & 0x3f) + 1;
- }
-
- /* Put core back in configuration state */
- write_c0_mvpcontrol(
- read_c0_mvpcontrol() | MVPCONTROL_VPC );
- mips_ihb();
- }
- }
- write_c0_mvpcontrol(read_c0_mvpcontrol() | MVPCONTROL_STLB);
- ehb();
-
- /*
- * Setup kernel data structures to use software total,
- * rather than read the per-VPE Config1 value. The values
- * for "CPU 0" gets copied to all the other CPUs as part
- * of their initialization in smtc_cpu_setup().
- */
-
- /* MIPS32 limits TLB indices to 64 */
- if (tlbsiz > 64)
- tlbsiz = 64;
- cpu_data[0].tlbsize = current_cpu_data.tlbsize = tlbsiz;
- smtc_status |= SMTC_TLB_SHARED;
- local_flush_tlb_all();
-
- printk("TLB of %d entry pairs shared by %d VPEs\n",
- tlbsiz, vpes);
- } else {
- printk("WARNING: TLB Not Sharable on SMTC Boot!\n");
- }
- }
-}
-
-
-/*
- * Incrementally build the CPU map out of constituent MIPS MT cores,
- * using the specified available VPEs and TCs. Plaform code needs
- * to ensure that each MIPS MT core invokes this routine on reset,
- * one at a time(!).
- *
- * This version of the build_cpu_map and prepare_cpus routines assumes
- * that *all* TCs of a MIPS MT core will be used for Linux, and that
- * they will be spread across *all* available VPEs (to minimise the
- * loss of efficiency due to exception service serialization).
- * An improved version would pick up configuration information and
- * possibly leave some TCs/VPEs as "slave" processors.
- *
- * Use c0_MVPConf0 to find out how many TCs are available, setting up
- * cpu_possible_mask and the logical/physical mappings.
- */
-
-int __init smtc_build_cpu_map(int start_cpu_slot)
-{
- int i, ntcs;
-
- /*
- * The CPU map isn't actually used for anything at this point,
- * so it's not clear what else we should do apart from set
- * everything up so that "logical" = "physical".
- */
- ntcs = ((read_c0_mvpconf0() & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT) + 1;
- for (i=start_cpu_slot; i<NR_CPUS && i<ntcs; i++) {
- set_cpu_possible(i, true);
- __cpu_number_map[i] = i;
- __cpu_logical_map[i] = i;
- }
-#ifdef CONFIG_MIPS_MT_FPAFF
- /* Initialize map of CPUs with FPUs */
- cpus_clear(mt_fpu_cpumask);
-#endif
-
- /* One of those TC's is the one booting, and not a secondary... */
- printk("%i available secondary CPU TC(s)\n", i - 1);
-
- return i;
-}
-
-/*
- * Common setup before any secondaries are started
- * Make sure all CPUs are in a sensible state before we boot any of the
- * secondaries.
- *
- * For MIPS MT "SMTC" operation, we set up all TCs, spread as evenly
- * as possible across the available VPEs.
- */
-
-static void smtc_tc_setup(int vpe, int tc, int cpu)
-{
- static int cp1contexts[MAX_SMTC_VPES];
-
- /*
- * Make a local copy of the available FPU contexts in order
- * to keep track of TCs that can have one.
- */
- if (tc == 1)
- {
- /*
- * FIXME: Multi-core SMTC hasn't been tested and the
- * maximum number of VPEs may change.
- */
- cp1contexts[0] = smtc_nconf1[0] - 1;
- cp1contexts[1] = smtc_nconf1[1];
- }
-
- settc(tc);
- write_tc_c0_tchalt(TCHALT_H);
- mips_ihb();
- write_tc_c0_tcstatus((read_tc_c0_tcstatus()
- & ~(TCSTATUS_TKSU | TCSTATUS_DA | TCSTATUS_IXMT))
- | TCSTATUS_A);
- /*
- * TCContext gets an offset from the base of the IPIQ array
- * to be used in low-level code to detect the presence of
- * an active IPI queue.
- */
- write_tc_c0_tccontext((sizeof(struct smtc_ipi_q) * cpu) << 16);
-
- /* Bind TC to VPE. */
- write_tc_c0_tcbind(vpe);
-
- /* In general, all TCs should have the same cpu_data indications. */
- memcpy(&cpu_data[cpu], &cpu_data[0], sizeof(struct cpuinfo_mips));
-
- /* Check to see if there is a FPU context available for this TC. */
- if (!cp1contexts[vpe])
- cpu_data[cpu].options &= ~MIPS_CPU_FPU;
- else
- cp1contexts[vpe]--;
-
- /* Store the TC and VPE into the cpu_data structure. */
- cpu_data[cpu].vpe_id = vpe;
- cpu_data[cpu].tc_id = tc;
-
- /* FIXME: Multi-core SMTC hasn't been tested, but be prepared. */
- cpu_data[cpu].core = (read_vpe_c0_ebase() >> 1) & 0xff;
-}
-
-/*
- * Tweak to get Count registers synced as closely as possible. The
- * value seems good for 34K-class cores.
- */
-
-#define CP0_SKEW 8
-
-void smtc_prepare_cpus(int cpus)
-{
- int i, vpe, tc, ntc, nvpe, tcpervpe[NR_CPUS], slop, cpu;
- unsigned long flags;
- unsigned long val;
- int nipi;
- struct smtc_ipi *pipi;
-
- /* disable interrupts so we can disable MT */
- local_irq_save(flags);
- /* disable MT so we can configure */
- dvpe();
- dmt();
-
- spin_lock_init(&freeIPIq.lock);
-
- /*
- * We probably don't have as many VPEs as we do SMP "CPUs",
- * but it's possible - and in any case we'll never use more!
- */
- for (i=0; i<NR_CPUS; i++) {
- IPIQ[i].head = IPIQ[i].tail = NULL;
- spin_lock_init(&IPIQ[i].lock);
- IPIQ[i].depth = 0;
- IPIQ[i].resched_flag = 0; /* No reschedules queued initially */
- }
-
- /* cpu_data index starts at zero */
- cpu = 0;
- cpu_data[cpu].vpe_id = 0;
- cpu_data[cpu].tc_id = 0;
- cpu_data[cpu].core = (read_c0_ebase() >> 1) & 0xff;
- cpu++;
-
- /* Report on boot-time options */
- mips_mt_set_cpuoptions();
- if (vpelimit > 0)
- printk("Limit of %d VPEs set\n", vpelimit);
- if (tclimit > 0)
- printk("Limit of %d TCs set\n", tclimit);
- if (nostlb) {
- printk("Shared TLB Use Inhibited - UNSAFE for Multi-VPE Operation\n");
- }
- if (asidmask)
- printk("ASID mask value override to 0x%x\n", asidmask);
-
- /* Temporary */
-#ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG
- if (hang_trig)
- printk("Logic Analyser Trigger on suspected TC hang\n");
-#endif /* CONFIG_SMTC_IDLE_HOOK_DEBUG */
-
- /* Put MVPE's into 'configuration state' */
- write_c0_mvpcontrol( read_c0_mvpcontrol() | MVPCONTROL_VPC );
-
- val = read_c0_mvpconf0();
- nvpe = ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1;
- if (vpelimit > 0 && nvpe > vpelimit)
- nvpe = vpelimit;
- ntc = ((val & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT) + 1;
- if (ntc > NR_CPUS)
- ntc = NR_CPUS;
- if (tclimit > 0 && ntc > tclimit)
- ntc = tclimit;
- slop = ntc % nvpe;
- for (i = 0; i < nvpe; i++) {
- tcpervpe[i] = ntc / nvpe;
- if (slop) {
- if((slop - i) > 0) tcpervpe[i]++;
- }
- }
- /* Handle command line override for VPE0 */
- if (vpe0limit > ntc) vpe0limit = ntc;
- if (vpe0limit > 0) {
- int slopslop;
- if (vpe0limit < tcpervpe[0]) {
- /* Reducing TC count - distribute to others */
- slop = tcpervpe[0] - vpe0limit;
- slopslop = slop % (nvpe - 1);
- tcpervpe[0] = vpe0limit;
- for (i = 1; i < nvpe; i++) {
- tcpervpe[i] += slop / (nvpe - 1);
- if(slopslop && ((slopslop - (i - 1) > 0)))
- tcpervpe[i]++;
- }
- } else if (vpe0limit > tcpervpe[0]) {
- /* Increasing TC count - steal from others */
- slop = vpe0limit - tcpervpe[0];
- slopslop = slop % (nvpe - 1);
- tcpervpe[0] = vpe0limit;
- for (i = 1; i < nvpe; i++) {
- tcpervpe[i] -= slop / (nvpe - 1);
- if(slopslop && ((slopslop - (i - 1) > 0)))
- tcpervpe[i]--;
- }
- }
- }
-
- /* Set up shared TLB */
- smtc_configure_tlb();
-
- for (tc = 0, vpe = 0 ; (vpe < nvpe) && (tc < ntc) ; vpe++) {
- /* Get number of CP1 contexts for each VPE. */
- if (tc == 0)
- {
- /*
- * Do not call settc() for TC0 or the FPU context
- * value will be incorrect. Besides, we know that
- * we are TC0 anyway.
- */
- smtc_nconf1[0] = ((read_vpe_c0_vpeconf1() &
- VPECONF1_NCP1) >> VPECONF1_NCP1_SHIFT);
- if (nvpe == 2)
- {
- settc(1);
- smtc_nconf1[1] = ((read_vpe_c0_vpeconf1() &
- VPECONF1_NCP1) >> VPECONF1_NCP1_SHIFT);
- settc(0);
- }
- }
- if (tcpervpe[vpe] == 0)
- continue;
- if (vpe != 0)
- printk(", ");
- printk("VPE %d: TC", vpe);
- for (i = 0; i < tcpervpe[vpe]; i++) {
- /*
- * TC 0 is bound to VPE 0 at reset,
- * and is presumably executing this
- * code. Leave it alone!
- */
- if (tc != 0) {
- smtc_tc_setup(vpe, tc, cpu);
- if (vpe != 0) {
- /*
- * Set MVP bit (possibly again). Do it
- * here to catch CPUs that have no TCs
- * bound to the VPE at reset. In that
- * case, a TC must be bound to the VPE
- * before we can set VPEControl[MVP]
- */
- write_vpe_c0_vpeconf0(
- read_vpe_c0_vpeconf0() |
- VPECONF0_MVP);
- }
- cpu++;
- }
- printk(" %d", tc);
- tc++;
- }
- if (vpe != 0) {
- /*
- * Allow this VPE to control others.
- */
- write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() |
- VPECONF0_MVP);
-
- /*
- * Clear any stale software interrupts from VPE's Cause
- */
- write_vpe_c0_cause(0);
-
- /*
- * Clear ERL/EXL of VPEs other than 0
- * and set restricted interrupt enable/mask.
- */
- write_vpe_c0_status((read_vpe_c0_status()
- & ~(ST0_BEV | ST0_ERL | ST0_EXL | ST0_IM))
- | (STATUSF_IP0 | STATUSF_IP1 | STATUSF_IP7
- | ST0_IE));
- /*
- * set config to be the same as vpe0,
- * particularly kseg0 coherency alg
- */
- write_vpe_c0_config(read_c0_config());
- /* Clear any pending timer interrupt */
- write_vpe_c0_compare(0);
- /* Propagate Config7 */
- write_vpe_c0_config7(read_c0_config7());
- write_vpe_c0_count(read_c0_count() + CP0_SKEW);
- ehb();
- }
- /* enable multi-threading within VPE */
- write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() | VPECONTROL_TE);
- /* enable the VPE */
- write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA);
- }
-
- /*
- * Pull any physically present but unused TCs out of circulation.
- */
- while (tc < (((val & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT) + 1)) {
- set_cpu_possible(tc, false);
- set_cpu_present(tc, false);
- tc++;
- }
-
- /* release config state */
- write_c0_mvpcontrol( read_c0_mvpcontrol() & ~ MVPCONTROL_VPC );
-
- printk("\n");
-
- /* Set up coprocessor affinity CPU mask(s) */
-
-#ifdef CONFIG_MIPS_MT_FPAFF
- for (tc = 0; tc < ntc; tc++) {
- if (cpu_data[tc].options & MIPS_CPU_FPU)
- cpu_set(tc, mt_fpu_cpumask);
- }
-#endif
-
- /* set up ipi interrupts... */
-
- /* If we have multiple VPEs running, set up the cross-VPE interrupt */
-
- setup_cross_vpe_interrupts(nvpe);
-
- /* Set up queue of free IPI "messages". */
- nipi = NR_CPUS * IPIBUF_PER_CPU;
- if (ipibuffers > 0)
- nipi = ipibuffers;
-
- pipi = kmalloc(nipi *sizeof(struct smtc_ipi), GFP_KERNEL);
- if (pipi == NULL)
- panic("kmalloc of IPI message buffers failed");
- else
- printk("IPI buffer pool of %d buffers\n", nipi);
- for (i = 0; i < nipi; i++) {
- smtc_ipi_nq(&freeIPIq, pipi);
- pipi++;
- }
-
- /* Arm multithreading and enable other VPEs - but all TCs are Halted */
- emt(EMT_ENABLE);
- evpe(EVPE_ENABLE);
- local_irq_restore(flags);
- /* Initialize SMTC /proc statistics/diagnostics */
- init_smtc_stats();
-}
-
-
-/*
- * Setup the PC, SP, and GP of a secondary processor and start it
- * running!
- * smp_bootstrap is the place to resume from
- * __KSTK_TOS(idle) is apparently the stack pointer
- * (unsigned long)idle->thread_info the gp
- *
- */
-void smtc_boot_secondary(int cpu, struct task_struct *idle)
-{
- extern u32 kernelsp[NR_CPUS];
- unsigned long flags;
- int mtflags;
-
- LOCK_MT_PRA();
- if (cpu_data[cpu].vpe_id != cpu_data[smp_processor_id()].vpe_id) {
- dvpe();
- }
- settc(cpu_data[cpu].tc_id);
-
- /* pc */
- write_tc_c0_tcrestart((unsigned long)&smp_bootstrap);
-
- /* stack pointer */
- kernelsp[cpu] = __KSTK_TOS(idle);
- write_tc_gpr_sp(__KSTK_TOS(idle));
-
- /* global pointer */
- write_tc_gpr_gp((unsigned long)task_thread_info(idle));
-
- smtc_status |= SMTC_MTC_ACTIVE;
- write_tc_c0_tchalt(0);
- if (cpu_data[cpu].vpe_id != cpu_data[smp_processor_id()].vpe_id) {
- evpe(EVPE_ENABLE);
- }
- UNLOCK_MT_PRA();
-}
-
-void smtc_init_secondary(void)
-{
-}
-
-void smtc_smp_finish(void)
-{
- int cpu = smp_processor_id();
-
- /*
- * Lowest-numbered CPU per VPE starts a clock tick.
- * Like per_cpu_trap_init() hack, this assumes that
- * SMTC init code assigns TCs consdecutively and
- * in ascending order across available VPEs.
- */
- if (cpu > 0 && (cpu_data[cpu].vpe_id != cpu_data[cpu - 1].vpe_id))
- write_c0_compare(read_c0_count() + mips_hpt_frequency/HZ);
-
- local_irq_enable();
-
- printk("TC %d going on-line as CPU %d\n",
- cpu_data[smp_processor_id()].tc_id, smp_processor_id());
-}
-
-void smtc_cpus_done(void)
-{
-}
-
-/*
- * Support for SMTC-optimized driver IRQ registration
- */
-
-/*
- * SMTC Kernel needs to manipulate low-level CPU interrupt mask
- * in do_IRQ. These are passed in setup_irq_smtc() and stored
- * in this table.
- */
-
-int setup_irq_smtc(unsigned int irq, struct irqaction * new,
- unsigned long hwmask)
-{
-#ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG
- unsigned int vpe = current_cpu_data.vpe_id;
-
- vpemask[vpe][irq - MIPS_CPU_IRQ_BASE] = 1;
-#endif
- irq_hwmask[irq] = hwmask;
-
- return setup_irq(irq, new);
-}
-
-#ifdef CONFIG_MIPS_MT_SMTC_IRQAFF
-/*
- * Support for IRQ affinity to TCs
- */
-
-void smtc_set_irq_affinity(unsigned int irq, cpumask_t affinity)
-{
- /*
- * If a "fast path" cache of quickly decodable affinity state
- * is maintained, this is where it gets done, on a call up
- * from the platform affinity code.
- */
-}
-
-void smtc_forward_irq(struct irq_data *d)
-{
- unsigned int irq = d->irq;
- int target;
-
- /*
- * OK wise guy, now figure out how to get the IRQ
- * to be serviced on an authorized "CPU".
- *
- * Ideally, to handle the situation where an IRQ has multiple
- * eligible CPUS, we would maintain state per IRQ that would
- * allow a fair distribution of service requests. Since the
- * expected use model is any-or-only-one, for simplicity
- * and efficiency, we just pick the easiest one to find.
- */
-
- target = cpumask_first(d->affinity);
-
- /*
- * We depend on the platform code to have correctly processed
- * IRQ affinity change requests to ensure that the IRQ affinity
- * mask has been purged of bits corresponding to nonexistent and
- * offline "CPUs", and to TCs bound to VPEs other than the VPE
- * connected to the physical interrupt input for the interrupt
- * in question. Otherwise we have a nasty problem with interrupt
- * mask management. This is best handled in non-performance-critical
- * platform IRQ affinity setting code, to minimize interrupt-time
- * checks.
- */
-
- /* If no one is eligible, service locally */
- if (target >= NR_CPUS)
- do_IRQ_no_affinity(irq);
- else
- smtc_send_ipi(target, IRQ_AFFINITY_IPI, irq);
-}
-
-#endif /* CONFIG_MIPS_MT_SMTC_IRQAFF */
-
-/*
- * IPI model for SMTC is tricky, because interrupts aren't TC-specific.
- * Within a VPE one TC can interrupt another by different approaches.
- * The easiest to get right would probably be to make all TCs except
- * the target IXMT and set a software interrupt, but an IXMT-based
- * scheme requires that a handler must run before a new IPI could
- * be sent, which would break the "broadcast" loops in MIPS MT.
- * A more gonzo approach within a VPE is to halt the TC, extract
- * its Restart, Status, and a couple of GPRs, and program the Restart
- * address to emulate an interrupt.
- *
- * Within a VPE, one can be confident that the target TC isn't in
- * a critical EXL state when halted, since the write to the Halt
- * register could not have issued on the writing thread if the
- * halting thread had EXL set. So k0 and k1 of the target TC
- * can be used by the injection code. Across VPEs, one can't
- * be certain that the target TC isn't in a critical exception
- * state. So we try a two-step process of sending a software
- * interrupt to the target VPE, which either handles the event
- * itself (if it was the target) or injects the event within
- * the VPE.
- */
-
-static void smtc_ipi_qdump(void)
-{
- int i;
- struct smtc_ipi *temp;
-
- for (i = 0; i < NR_CPUS ;i++) {
- pr_info("IPIQ[%d]: head = 0x%x, tail = 0x%x, depth = %d\n",
- i, (unsigned)IPIQ[i].head, (unsigned)IPIQ[i].tail,
- IPIQ[i].depth);
- temp = IPIQ[i].head;
-
- while (temp != IPIQ[i].tail) {
- pr_debug("%d %d %d: ", temp->type, temp->dest,
- (int)temp->arg);
-#ifdef SMTC_IPI_DEBUG
- pr_debug("%u %lu\n", temp->sender, temp->stamp);
-#else
- pr_debug("\n");
-#endif
- temp = temp->flink;
- }
- }
-}
-
-/*
- * The standard atomic.h primitives don't quite do what we want
- * here: We need an atomic add-and-return-previous-value (which
- * could be done with atomic_add_return and a decrement) and an
- * atomic set/zero-and-return-previous-value (which can't really
- * be done with the atomic.h primitives). And since this is
- * MIPS MT, we can assume that we have LL/SC.
- */
-static inline int atomic_postincrement(atomic_t *v)
-{
- unsigned long result;
-
- unsigned long temp;
-
- __asm__ __volatile__(
- "1: ll %0, %2 \n"
- " addu %1, %0, 1 \n"
- " sc %1, %2 \n"
- " beqz %1, 1b \n"
- __WEAK_LLSC_MB
- : "=&r" (result), "=&r" (temp), "=m" (v->counter)
- : "m" (v->counter)
- : "memory");
-
- return result;
-}
-
-void smtc_send_ipi(int cpu, int type, unsigned int action)
-{
- int tcstatus;
- struct smtc_ipi *pipi;
- unsigned long flags;
- int mtflags;
- unsigned long tcrestart;
- int set_resched_flag = (type == LINUX_SMP_IPI &&
- action == SMP_RESCHEDULE_YOURSELF);
-
- if (cpu == smp_processor_id()) {
- printk("Cannot Send IPI to self!\n");
- return;
- }
- if (set_resched_flag && IPIQ[cpu].resched_flag != 0)
- return; /* There is a reschedule queued already */
-
- /* Set up a descriptor, to be delivered either promptly or queued */
- pipi = smtc_ipi_dq(&freeIPIq);
- if (pipi == NULL) {
- bust_spinlocks(1);
- mips_mt_regdump(dvpe());
- panic("IPI Msg. Buffers Depleted");
- }
- pipi->type = type;
- pipi->arg = (void *)action;
- pipi->dest = cpu;
- if (cpu_data[cpu].vpe_id != cpu_data[smp_processor_id()].vpe_id) {
- /* If not on same VPE, enqueue and send cross-VPE interrupt */
- IPIQ[cpu].resched_flag |= set_resched_flag;
- smtc_ipi_nq(&IPIQ[cpu], pipi);
- LOCK_CORE_PRA();
- settc(cpu_data[cpu].tc_id);
- write_vpe_c0_cause(read_vpe_c0_cause() | C_SW1);
- UNLOCK_CORE_PRA();
- } else {
- /*
- * Not sufficient to do a LOCK_MT_PRA (dmt) here,
- * since ASID shootdown on the other VPE may
- * collide with this operation.
- */
- LOCK_CORE_PRA();
- settc(cpu_data[cpu].tc_id);
- /* Halt the targeted TC */
- write_tc_c0_tchalt(TCHALT_H);
- mips_ihb();
-
- /*
- * Inspect TCStatus - if IXMT is set, we have to queue
- * a message. Otherwise, we set up the "interrupt"
- * of the other TC
- */
- tcstatus = read_tc_c0_tcstatus();
-
- if ((tcstatus & TCSTATUS_IXMT) != 0) {
- /*
- * If we're in the the irq-off version of the wait
- * loop, we need to force exit from the wait and
- * do a direct post of the IPI.
- */
- if (cpu_wait == r4k_wait_irqoff) {
- tcrestart = read_tc_c0_tcrestart();
- if (address_is_in_r4k_wait_irqoff(tcrestart)) {
- write_tc_c0_tcrestart(__pastwait);
- tcstatus &= ~TCSTATUS_IXMT;
- write_tc_c0_tcstatus(tcstatus);
- goto postdirect;
- }
- }
- /*
- * Otherwise we queue the message for the target TC
- * to pick up when he does a local_irq_restore()
- */
- write_tc_c0_tchalt(0);
- UNLOCK_CORE_PRA();
- IPIQ[cpu].resched_flag |= set_resched_flag;
- smtc_ipi_nq(&IPIQ[cpu], pipi);
- } else {
-postdirect:
- post_direct_ipi(cpu, pipi);
- write_tc_c0_tchalt(0);
- UNLOCK_CORE_PRA();
- }
- }
-}
-
-/*
- * Send IPI message to Halted TC, TargTC/TargVPE already having been set
- */
-static void post_direct_ipi(int cpu, struct smtc_ipi *pipi)
-{
- struct pt_regs *kstack;
- unsigned long tcstatus;
- unsigned long tcrestart;
- extern u32 kernelsp[NR_CPUS];
- extern void __smtc_ipi_vector(void);
-//printk("%s: on %d for %d\n", __func__, smp_processor_id(), cpu);
-
- /* Extract Status, EPC from halted TC */
- tcstatus = read_tc_c0_tcstatus();
- tcrestart = read_tc_c0_tcrestart();
- /* If TCRestart indicates a WAIT instruction, advance the PC */
- if ((tcrestart & 0x80000000)
- && ((*(unsigned int *)tcrestart & 0xfe00003f) == 0x42000020)) {
- tcrestart += 4;
- }
- /*
- * Save on TC's future kernel stack
- *
- * CU bit of Status is indicator that TC was
- * already running on a kernel stack...
- */
- if (tcstatus & ST0_CU0) {
- /* Note that this "- 1" is pointer arithmetic */
- kstack = ((struct pt_regs *)read_tc_gpr_sp()) - 1;
- } else {
- kstack = ((struct pt_regs *)kernelsp[cpu]) - 1;
- }
-
- kstack->cp0_epc = (long)tcrestart;
- /* Save TCStatus */
- kstack->cp0_tcstatus = tcstatus;
- /* Pass token of operation to be performed kernel stack pad area */
- kstack->pad0[4] = (unsigned long)pipi;
- /* Pass address of function to be called likewise */
- kstack->pad0[5] = (unsigned long)&ipi_decode;
- /* Set interrupt exempt and kernel mode */
- tcstatus |= TCSTATUS_IXMT;
- tcstatus &= ~TCSTATUS_TKSU;
- write_tc_c0_tcstatus(tcstatus);
- ehb();
- /* Set TC Restart address to be SMTC IPI vector */
- write_tc_c0_tcrestart(__smtc_ipi_vector);
-}
-
-static void ipi_resched_interrupt(void)
-{
- scheduler_ipi();
-}
-
-static void ipi_call_interrupt(void)
-{
- /* Invoke generic function invocation code in smp.c */
- smp_call_function_interrupt();
-}
-
-DECLARE_PER_CPU(struct clock_event_device, mips_clockevent_device);
-
-static void __irq_entry smtc_clock_tick_interrupt(void)
-{
- unsigned int cpu = smp_processor_id();
- struct clock_event_device *cd;
- int irq = MIPS_CPU_IRQ_BASE + 1;
-
- irq_enter();
- kstat_incr_irq_this_cpu(irq);
- cd = &per_cpu(mips_clockevent_device, cpu);
- cd->event_handler(cd);
- irq_exit();
-}
-
-void ipi_decode(struct smtc_ipi *pipi)
-{
- void *arg_copy = pipi->arg;
- int type_copy = pipi->type;
-
- smtc_ipi_nq(&freeIPIq, pipi);
-
- switch (type_copy) {
- case SMTC_CLOCK_TICK:
- smtc_clock_tick_interrupt();
- break;
-
- case LINUX_SMP_IPI:
- switch ((int)arg_copy) {
- case SMP_RESCHEDULE_YOURSELF:
- ipi_resched_interrupt();
- break;
- case SMP_CALL_FUNCTION:
- ipi_call_interrupt();
- break;
- default:
- printk("Impossible SMTC IPI Argument %p\n", arg_copy);
- break;
- }
- break;
-#ifdef CONFIG_MIPS_MT_SMTC_IRQAFF
- case IRQ_AFFINITY_IPI:
- /*
- * Accept a "forwarded" interrupt that was initially
- * taken by a TC who doesn't have affinity for the IRQ.
- */
- do_IRQ_no_affinity((int)arg_copy);
- break;
-#endif /* CONFIG_MIPS_MT_SMTC_IRQAFF */
- default:
- printk("Impossible SMTC IPI Type 0x%x\n", type_copy);
- break;
- }
-}
-
-/*
- * Similar to smtc_ipi_replay(), but invoked from context restore,
- * so it reuses the current exception frame rather than set up a
- * new one with self_ipi.
- */
-
-void deferred_smtc_ipi(void)
-{
- int cpu = smp_processor_id();
-
- /*
- * Test is not atomic, but much faster than a dequeue,
- * and the vast majority of invocations will have a null queue.
- * If irq_disabled when this was called, then any IPIs queued
- * after we test last will be taken on the next irq_enable/restore.
- * If interrupts were enabled, then any IPIs added after the
- * last test will be taken directly.
- */
-
- while (IPIQ[cpu].head != NULL) {
- struct smtc_ipi_q *q = &IPIQ[cpu];
- struct smtc_ipi *pipi;
- unsigned long flags;
-
- /*
- * It may be possible we'll come in with interrupts
- * already enabled.
- */
- local_irq_save(flags);
- spin_lock(&q->lock);
- pipi = __smtc_ipi_dq(q);
- spin_unlock(&q->lock);
- if (pipi != NULL) {
- if (pipi->type == LINUX_SMP_IPI &&
- (int)pipi->arg == SMP_RESCHEDULE_YOURSELF)
- IPIQ[cpu].resched_flag = 0;
- ipi_decode(pipi);
- }
- /*
- * The use of the __raw_local restore isn't
- * as obviously necessary here as in smtc_ipi_replay(),
- * but it's more efficient, given that we're already
- * running down the IPI queue.
- */
- __arch_local_irq_restore(flags);
- }
-}
-
-/*
- * Cross-VPE interrupts in the SMTC prototype use "software interrupts"
- * set via cross-VPE MTTR manipulation of the Cause register. It would be
- * in some regards preferable to have external logic for "doorbell" hardware
- * interrupts.
- */
-
-static int cpu_ipi_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_IRQ;
-
-static irqreturn_t ipi_interrupt(int irq, void *dev_idm)
-{
- int my_vpe = cpu_data[smp_processor_id()].vpe_id;
- int my_tc = cpu_data[smp_processor_id()].tc_id;
- int cpu;
- struct smtc_ipi *pipi;
- unsigned long tcstatus;
- int sent;
- unsigned long flags;
- unsigned int mtflags;
- unsigned int vpflags;
-
- /*
- * So long as cross-VPE interrupts are done via
- * MFTR/MTTR read-modify-writes of Cause, we need
- * to stop other VPEs whenever the local VPE does
- * anything similar.
- */
- local_irq_save(flags);
- vpflags = dvpe();
- clear_c0_cause(0x100 << MIPS_CPU_IPI_IRQ);
- set_c0_status(0x100 << MIPS_CPU_IPI_IRQ);
- irq_enable_hazard();
- evpe(vpflags);
- local_irq_restore(flags);
-
- /*
- * Cross-VPE Interrupt handler: Try to directly deliver IPIs
- * queued for TCs on this VPE other than the current one.
- * Return-from-interrupt should cause us to drain the queue
- * for the current TC, so we ought not to have to do it explicitly here.
- */
-
- for_each_online_cpu(cpu) {
- if (cpu_data[cpu].vpe_id != my_vpe)
- continue;
-
- pipi = smtc_ipi_dq(&IPIQ[cpu]);
- if (pipi != NULL) {
- if (cpu_data[cpu].tc_id != my_tc) {
- sent = 0;
- LOCK_MT_PRA();
- settc(cpu_data[cpu].tc_id);
- write_tc_c0_tchalt(TCHALT_H);
- mips_ihb();
- tcstatus = read_tc_c0_tcstatus();
- if ((tcstatus & TCSTATUS_IXMT) == 0) {
- post_direct_ipi(cpu, pipi);
- sent = 1;
- }
- write_tc_c0_tchalt(0);
- UNLOCK_MT_PRA();
- if (!sent) {
- smtc_ipi_req(&IPIQ[cpu], pipi);
- }
- } else {
- /*
- * ipi_decode() should be called
- * with interrupts off
- */
- local_irq_save(flags);
- if (pipi->type == LINUX_SMP_IPI &&
- (int)pipi->arg == SMP_RESCHEDULE_YOURSELF)
- IPIQ[cpu].resched_flag = 0;
- ipi_decode(pipi);
- local_irq_restore(flags);
- }
- }
- }
-
- return IRQ_HANDLED;
-}
-
-static void ipi_irq_dispatch(void)
-{
- do_IRQ(cpu_ipi_irq);
-}
-
-static struct irqaction irq_ipi = {
- .handler = ipi_interrupt,
- .flags = IRQF_PERCPU,
- .name = "SMTC_IPI"
-};
-
-static void setup_cross_vpe_interrupts(unsigned int nvpe)
-{
- if (nvpe < 1)
- return;
-
- if (!cpu_has_vint)
- panic("SMTC Kernel requires Vectored Interrupt support");
-
- set_vi_handler(MIPS_CPU_IPI_IRQ, ipi_irq_dispatch);
-
- setup_irq_smtc(cpu_ipi_irq, &irq_ipi, (0x100 << MIPS_CPU_IPI_IRQ));
-
- irq_set_handler(cpu_ipi_irq, handle_percpu_irq);
-}
-
-/*
- * SMTC-specific hacks invoked from elsewhere in the kernel.
- */
-
- /*
- * smtc_ipi_replay is called from raw_local_irq_restore
- */
-
-void smtc_ipi_replay(void)
-{
- unsigned int cpu = smp_processor_id();
-
- /*
- * To the extent that we've ever turned interrupts off,
- * we may have accumulated deferred IPIs. This is subtle.
- * we should be OK: If we pick up something and dispatch
- * it here, that's great. If we see nothing, but concurrent
- * with this operation, another TC sends us an IPI, IXMT
- * is clear, and we'll handle it as a real pseudo-interrupt
- * and not a pseudo-pseudo interrupt. The important thing
- * is to do the last check for queued message *after* the
- * re-enabling of interrupts.
- */
- while (IPIQ[cpu].head != NULL) {
- struct smtc_ipi_q *q = &IPIQ[cpu];
- struct smtc_ipi *pipi;
- unsigned long flags;
-
- /*
- * It's just possible we'll come in with interrupts
- * already enabled.
- */
- local_irq_save(flags);
-
- spin_lock(&q->lock);
- pipi = __smtc_ipi_dq(q);
- spin_unlock(&q->lock);
- /*
- ** But use a raw restore here to avoid recursion.
- */
- __arch_local_irq_restore(flags);
-
- if (pipi) {
- self_ipi(pipi);
- smtc_cpu_stats[cpu].selfipis++;
- }
- }
-}
-
-EXPORT_SYMBOL(smtc_ipi_replay);
-
-void smtc_idle_loop_hook(void)
-{
-#ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG
- int im;
- int flags;
- int mtflags;
- int bit;
- int vpe;
- int tc;
- int hook_ntcs;
- /*
- * printk within DMT-protected regions can deadlock,
- * so buffer diagnostic messages for later output.
- */
- char *pdb_msg;
- char id_ho_db_msg[768]; /* worst-case use should be less than 700 */
-
- if (atomic_read(&idle_hook_initialized) == 0) { /* fast test */
- if (atomic_add_return(1, &idle_hook_initialized) == 1) {
- int mvpconf0;
- /* Tedious stuff to just do once */
- mvpconf0 = read_c0_mvpconf0();
- hook_ntcs = ((mvpconf0 & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT) + 1;
- if (hook_ntcs > NR_CPUS)
- hook_ntcs = NR_CPUS;
- for (tc = 0; tc < hook_ntcs; tc++) {
- tcnoprog[tc] = 0;
- clock_hang_reported[tc] = 0;
- }
- for (vpe = 0; vpe < 2; vpe++)
- for (im = 0; im < 8; im++)
- imstuckcount[vpe][im] = 0;
- printk("Idle loop test hook initialized for %d TCs\n", hook_ntcs);
- atomic_set(&idle_hook_initialized, 1000);
- } else {
- /* Someone else is initializing in parallel - let 'em finish */
- while (atomic_read(&idle_hook_initialized) < 1000)
- ;
- }
- }
-
- /* Have we stupidly left IXMT set somewhere? */
- if (read_c0_tcstatus() & 0x400) {
- write_c0_tcstatus(read_c0_tcstatus() & ~0x400);
- ehb();
- printk("Dangling IXMT in cpu_idle()\n");
- }
-
- /* Have we stupidly left an IM bit turned off? */
-#define IM_LIMIT 2000
- local_irq_save(flags);
- mtflags = dmt();
- pdb_msg = &id_ho_db_msg[0];
- im = read_c0_status();
- vpe = current_cpu_data.vpe_id;
- for (bit = 0; bit < 8; bit++) {
- /*
- * In current prototype, I/O interrupts
- * are masked for VPE > 0
- */
- if (vpemask[vpe][bit]) {
- if (!(im & (0x100 << bit)))
- imstuckcount[vpe][bit]++;
- else
- imstuckcount[vpe][bit] = 0;
- if (imstuckcount[vpe][bit] > IM_LIMIT) {
- set_c0_status(0x100 << bit);
- ehb();
- imstuckcount[vpe][bit] = 0;
- pdb_msg += sprintf(pdb_msg,
- "Dangling IM %d fixed for VPE %d\n", bit,
- vpe);
- }
- }
- }
-
- emt(mtflags);
- local_irq_restore(flags);
- if (pdb_msg != &id_ho_db_msg[0])
- printk("CPU%d: %s", smp_processor_id(), id_ho_db_msg);
-#endif /* CONFIG_SMTC_IDLE_HOOK_DEBUG */
-
- smtc_ipi_replay();
-}
-
-void smtc_soft_dump(void)
-{
- int i;
-
- printk("Counter Interrupts taken per CPU (TC)\n");
- for (i=0; i < NR_CPUS; i++) {
- printk("%d: %ld\n", i, smtc_cpu_stats[i].timerints);
- }
- printk("Self-IPI invocations:\n");
- for (i=0; i < NR_CPUS; i++) {
- printk("%d: %ld\n", i, smtc_cpu_stats[i].selfipis);
- }
- smtc_ipi_qdump();
- printk("%d Recoveries of \"stolen\" FPU\n",
- atomic_read(&smtc_fpu_recoveries));
-}
-
-
-/*
- * TLB management routines special to SMTC
- */
-
-void smtc_get_new_mmu_context(struct mm_struct *mm, unsigned long cpu)
-{
- unsigned long flags, mtflags, tcstat, prevhalt, asid;
- int tlb, i;
-
- /*
- * It would be nice to be able to use a spinlock here,
- * but this is invoked from within TLB flush routines
- * that protect themselves with DVPE, so if a lock is
- * held by another TC, it'll never be freed.
- *
- * DVPE/DMT must not be done with interrupts enabled,
- * so even so most callers will already have disabled
- * them, let's be really careful...
- */
-
- local_irq_save(flags);
- if (smtc_status & SMTC_TLB_SHARED) {
- mtflags = dvpe();
- tlb = 0;
- } else {
- mtflags = dmt();
- tlb = cpu_data[cpu].vpe_id;
- }
- asid = asid_cache(cpu);
-
- do {
- if (!((asid += ASID_INC) & ASID_MASK) ) {
- if (cpu_has_vtag_icache)
- flush_icache_all();
- /* Traverse all online CPUs (hack requires contiguous range) */
- for_each_online_cpu(i) {
- /*
- * We don't need to worry about our own CPU, nor those of
- * CPUs who don't share our TLB.
- */
- if ((i != smp_processor_id()) &&
- ((smtc_status & SMTC_TLB_SHARED) ||
- (cpu_data[i].vpe_id == cpu_data[cpu].vpe_id))) {
- settc(cpu_data[i].tc_id);
- prevhalt = read_tc_c0_tchalt() & TCHALT_H;
- if (!prevhalt) {
- write_tc_c0_tchalt(TCHALT_H);
- mips_ihb();
- }
- tcstat = read_tc_c0_tcstatus();
- smtc_live_asid[tlb][(tcstat & ASID_MASK)] |= (asiduse)(0x1 << i);
- if (!prevhalt)
- write_tc_c0_tchalt(0);
- }
- }
- if (!asid) /* fix version if needed */
- asid = ASID_FIRST_VERSION;
- local_flush_tlb_all(); /* start new asid cycle */
- }
- } while (smtc_live_asid[tlb][(asid & ASID_MASK)]);
-
- /*
- * SMTC shares the TLB within VPEs and possibly across all VPEs.
- */
- for_each_online_cpu(i) {
- if ((smtc_status & SMTC_TLB_SHARED) ||
- (cpu_data[i].vpe_id == cpu_data[cpu].vpe_id))
- cpu_context(i, mm) = asid_cache(i) = asid;
- }
-
- if (smtc_status & SMTC_TLB_SHARED)
- evpe(mtflags);
- else
- emt(mtflags);
- local_irq_restore(flags);
-}
-
-/*
- * Invoked from macros defined in mmu_context.h
- * which must already have disabled interrupts
- * and done a DVPE or DMT as appropriate.
- */
-
-void smtc_flush_tlb_asid(unsigned long asid)
-{
- int entry;
- unsigned long ehi;
-
- entry = read_c0_wired();
-
- /* Traverse all non-wired entries */
- while (entry < current_cpu_data.tlbsize) {
- write_c0_index(entry);
- ehb();
- tlb_read();
- ehb();
- ehi = read_c0_entryhi();
- if ((ehi & ASID_MASK) == asid) {
- /*
- * Invalidate only entries with specified ASID,
- * makiing sure all entries differ.
- */
- write_c0_entryhi(CKSEG0 + (entry << (PAGE_SHIFT + 1)));
- write_c0_entrylo0(0);
- write_c0_entrylo1(0);
- mtc0_tlbw_hazard();
- tlb_write_indexed();
- }
- entry++;
- }
- write_c0_index(PARKED_INDEX);
- tlbw_use_hazard();
-}
-
-/*
- * Support for single-threading cache flush operations.
- */
-
-static int halt_state_save[NR_CPUS];
-
-/*
- * To really, really be sure that nothing is being done
- * by other TCs, halt them all. This code assumes that
- * a DVPE has already been done, so while their Halted
- * state is theoretically architecturally unstable, in
- * practice, it's not going to change while we're looking
- * at it.
- */
-
-void smtc_cflush_lockdown(void)
-{
- int cpu;
-
- for_each_online_cpu(cpu) {
- if (cpu != smp_processor_id()) {
- settc(cpu_data[cpu].tc_id);
- halt_state_save[cpu] = read_tc_c0_tchalt();
- write_tc_c0_tchalt(TCHALT_H);
- }
- }
- mips_ihb();
-}
-
-/* It would be cheating to change the cpu_online states during a flush! */
-
-void smtc_cflush_release(void)
-{
- int cpu;
-
- /*
- * Start with a hazard barrier to ensure
- * that all CACHE ops have played through.
- */
- mips_ihb();
-
- for_each_online_cpu(cpu) {
- if (cpu != smp_processor_id()) {
- settc(cpu_data[cpu].tc_id);
- write_tc_c0_tchalt(halt_state_save[cpu]);
- }
- }
- mips_ihb();
-}