diff options
Diffstat (limited to 'arch/mips/loongson2ef/common')
24 files changed, 2194 insertions, 0 deletions
diff --git a/arch/mips/loongson2ef/common/Makefile b/arch/mips/loongson2ef/common/Makefile new file mode 100644 index 000000000000..d5ab3e543ea3 --- /dev/null +++ b/arch/mips/loongson2ef/common/Makefile @@ -0,0 +1,26 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Makefile for loongson based machines. +# + +obj-y += setup.o init.o env.o time.o reset.o irq.o \ + bonito-irq.o mem.o machtype.o platform.o serial.o +obj-$(CONFIG_PCI) += pci.o + +# +# Serial port support +# +obj-$(CONFIG_LOONGSON_UART_BASE) += uart_base.o +obj-$(CONFIG_LOONGSON_MC146818) += rtc.o + +# +# Enable CS5536 Virtual Support Module(VSM) to virtulize the PCI configure +# space +# +obj-$(CONFIG_CS5536) += cs5536/ + +# +# Suspend Support +# + +obj-$(CONFIG_SUSPEND) += pm.o diff --git a/arch/mips/loongson2ef/common/bonito-irq.c b/arch/mips/loongson2ef/common/bonito-irq.c new file mode 100644 index 000000000000..82352cc25e4c --- /dev/null +++ b/arch/mips/loongson2ef/common/bonito-irq.c @@ -0,0 +1,49 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2001 MontaVista Software Inc. + * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net + * Copyright (C) 2000, 2001 Ralf Baechle (ralf@gnu.org) + * + * Copyright (C) 2007 Lemote Inc. & Institute of Computing Technology + * Author: Fuxin Zhang, zhangfx@lemote.com + */ +#include <linux/interrupt.h> +#include <linux/compiler.h> + +#include <loongson.h> + +static inline void bonito_irq_enable(struct irq_data *d) +{ + LOONGSON_INTENSET = (1 << (d->irq - LOONGSON_IRQ_BASE)); + mmiowb(); +} + +static inline void bonito_irq_disable(struct irq_data *d) +{ + LOONGSON_INTENCLR = (1 << (d->irq - LOONGSON_IRQ_BASE)); + mmiowb(); +} + +static struct irq_chip bonito_irq_type = { + .name = "bonito_irq", + .irq_mask = bonito_irq_disable, + .irq_unmask = bonito_irq_enable, +}; + +static struct irqaction __maybe_unused dma_timeout_irqaction = { + .handler = no_action, + .name = "dma_timeout", +}; + +void bonito_irq_init(void) +{ + u32 i; + + for (i = LOONGSON_IRQ_BASE; i < LOONGSON_IRQ_BASE + 32; i++) + irq_set_chip_and_handler(i, &bonito_irq_type, + handle_level_irq); + +#ifdef CONFIG_CPU_LOONGSON2E + setup_irq(LOONGSON_IRQ_BASE + 10, &dma_timeout_irqaction); +#endif +} diff --git a/arch/mips/loongson2ef/common/cs5536/Makefile b/arch/mips/loongson2ef/common/cs5536/Makefile new file mode 100644 index 000000000000..b32b29661245 --- /dev/null +++ b/arch/mips/loongson2ef/common/cs5536/Makefile @@ -0,0 +1,12 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Makefile for CS5536 support. +# + +obj-$(CONFIG_CS5536) += cs5536_pci.o cs5536_ide.o cs5536_acc.o cs5536_ohci.o \ + cs5536_isa.o cs5536_ehci.o + +# +# Enable cs5536 mfgpt Timer +# +obj-$(CONFIG_CS5536_MFGPT) += cs5536_mfgpt.o diff --git a/arch/mips/loongson2ef/common/cs5536/cs5536_acc.c b/arch/mips/loongson2ef/common/cs5536/cs5536_acc.c new file mode 100644 index 000000000000..ff50aae72916 --- /dev/null +++ b/arch/mips/loongson2ef/common/cs5536/cs5536_acc.c @@ -0,0 +1,136 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * the ACC Virtual Support Module of AMD CS5536 + * + * Copyright (C) 2007 Lemote, Inc. + * Author : jlliu, liujl@lemote.com + * + * Copyright (C) 2009 Lemote, Inc. + * Author: Wu Zhangjin, wuzhangjin@gmail.com + */ + +#include <cs5536/cs5536.h> +#include <cs5536/cs5536_pci.h> + +void pci_acc_write_reg(int reg, u32 value) +{ + u32 hi = 0, lo = value; + + switch (reg) { + case PCI_COMMAND: + _rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo); + if (value & PCI_COMMAND_MASTER) + lo |= (0x03 << 8); + else + lo &= ~(0x03 << 8); + _wrmsr(GLIU_MSR_REG(GLIU_PAE), hi, lo); + break; + case PCI_STATUS: + if (value & PCI_STATUS_PARITY) { + _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); + if (lo & SB_PARE_ERR_FLAG) { + lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG; + _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo); + } + } + break; + case PCI_BAR0_REG: + if (value == PCI_BAR_RANGE_MASK) { + _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); + lo |= SOFT_BAR_ACC_FLAG; + _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); + } else if (value & 0x01) { + value &= 0xfffffffc; + hi = 0xA0000000 | ((value & 0x000ff000) >> 12); + lo = 0x000fff80 | ((value & 0x00000fff) << 20); + _wrmsr(GLIU_MSR_REG(GLIU_IOD_BM1), hi, lo); + } + break; + case PCI_ACC_INT_REG: + _rdmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), &hi, &lo); + /* disable all the usb interrupt in PIC */ + lo &= ~(0xf << PIC_YSEL_LOW_ACC_SHIFT); + if (value) /* enable all the acc interrupt in PIC */ + lo |= (CS5536_ACC_INTR << PIC_YSEL_LOW_ACC_SHIFT); + _wrmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), hi, lo); + break; + default: + break; + } +} + +u32 pci_acc_read_reg(int reg) +{ + u32 hi, lo; + u32 conf_data = 0; + + switch (reg) { + case PCI_VENDOR_ID: + conf_data = + CFG_PCI_VENDOR_ID(CS5536_ACC_DEVICE_ID, CS5536_VENDOR_ID); + break; + case PCI_COMMAND: + _rdmsr(GLIU_MSR_REG(GLIU_IOD_BM1), &hi, &lo); + if (((lo & 0xfff00000) || (hi & 0x000000ff)) + && ((hi & 0xf0000000) == 0xa0000000)) + conf_data |= PCI_COMMAND_IO; + _rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo); + if ((lo & 0x300) == 0x300) + conf_data |= PCI_COMMAND_MASTER; + break; + case PCI_STATUS: + conf_data |= PCI_STATUS_66MHZ; + conf_data |= PCI_STATUS_FAST_BACK; + _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); + if (lo & SB_PARE_ERR_FLAG) + conf_data |= PCI_STATUS_PARITY; + conf_data |= PCI_STATUS_DEVSEL_MEDIUM; + break; + case PCI_CLASS_REVISION: + _rdmsr(ACC_MSR_REG(ACC_CAP), &hi, &lo); + conf_data = lo & 0x000000ff; + conf_data |= (CS5536_ACC_CLASS_CODE << 8); + break; + case PCI_CACHE_LINE_SIZE: + conf_data = + CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE, + PCI_NORMAL_LATENCY_TIMER); + break; + case PCI_BAR0_REG: + _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); + if (lo & SOFT_BAR_ACC_FLAG) { + conf_data = CS5536_ACC_RANGE | + PCI_BASE_ADDRESS_SPACE_IO; + lo &= ~SOFT_BAR_ACC_FLAG; + _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); + } else { + _rdmsr(GLIU_MSR_REG(GLIU_IOD_BM1), &hi, &lo); + conf_data = (hi & 0x000000ff) << 12; + conf_data |= (lo & 0xfff00000) >> 20; + conf_data |= 0x01; + conf_data &= ~0x02; + } + break; + case PCI_CARDBUS_CIS: + conf_data = PCI_CARDBUS_CIS_POINTER; + break; + case PCI_SUBSYSTEM_VENDOR_ID: + conf_data = + CFG_PCI_VENDOR_ID(CS5536_ACC_SUB_ID, CS5536_SUB_VENDOR_ID); + break; + case PCI_ROM_ADDRESS: + conf_data = PCI_EXPANSION_ROM_BAR; + break; + case PCI_CAPABILITY_LIST: + conf_data = PCI_CAPLIST_USB_POINTER; + break; + case PCI_INTERRUPT_LINE: + conf_data = + CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_ACC_INTR); + break; + default: + break; + } + + return conf_data; +} diff --git a/arch/mips/loongson2ef/common/cs5536/cs5536_ehci.c b/arch/mips/loongson2ef/common/cs5536/cs5536_ehci.c new file mode 100644 index 000000000000..bd4c39fe6109 --- /dev/null +++ b/arch/mips/loongson2ef/common/cs5536/cs5536_ehci.c @@ -0,0 +1,156 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * the EHCI Virtual Support Module of AMD CS5536 + * + * Copyright (C) 2007 Lemote, Inc. + * Author : jlliu, liujl@lemote.com + * + * Copyright (C) 2009 Lemote, Inc. + * Author: Wu Zhangjin, wuzhangjin@gmail.com + */ + +#include <cs5536/cs5536.h> +#include <cs5536/cs5536_pci.h> + +void pci_ehci_write_reg(int reg, u32 value) +{ + u32 hi = 0, lo = value; + + switch (reg) { + case PCI_COMMAND: + _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); + if (value & PCI_COMMAND_MASTER) + hi |= PCI_COMMAND_MASTER; + else + hi &= ~PCI_COMMAND_MASTER; + + if (value & PCI_COMMAND_MEMORY) + hi |= PCI_COMMAND_MEMORY; + else + hi &= ~PCI_COMMAND_MEMORY; + _wrmsr(USB_MSR_REG(USB_EHCI), hi, lo); + break; + case PCI_STATUS: + if (value & PCI_STATUS_PARITY) { + _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); + if (lo & SB_PARE_ERR_FLAG) { + lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG; + _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo); + } + } + break; + case PCI_BAR0_REG: + if (value == PCI_BAR_RANGE_MASK) { + _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); + lo |= SOFT_BAR_EHCI_FLAG; + _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); + } else if ((value & 0x01) == 0x00) { + _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); + lo = value; + _wrmsr(USB_MSR_REG(USB_EHCI), hi, lo); + + value &= 0xfffffff0; + hi = 0x40000000 | ((value & 0xff000000) >> 24); + lo = 0x000fffff | ((value & 0x00fff000) << 8); + _wrmsr(GLIU_MSR_REG(GLIU_P2D_BM4), hi, lo); + } + break; + case PCI_EHCI_LEGSMIEN_REG: + _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); + hi &= 0x003f0000; + hi |= (value & 0x3f) << 16; + _wrmsr(USB_MSR_REG(USB_EHCI), hi, lo); + break; + case PCI_EHCI_FLADJ_REG: + _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); + hi &= ~0x00003f00; + hi |= value & 0x00003f00; + _wrmsr(USB_MSR_REG(USB_EHCI), hi, lo); + break; + default: + break; + } +} + +u32 pci_ehci_read_reg(int reg) +{ + u32 conf_data = 0; + u32 hi, lo; + + switch (reg) { + case PCI_VENDOR_ID: + conf_data = + CFG_PCI_VENDOR_ID(CS5536_EHCI_DEVICE_ID, CS5536_VENDOR_ID); + break; + case PCI_COMMAND: + _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); + if (hi & PCI_COMMAND_MASTER) + conf_data |= PCI_COMMAND_MASTER; + if (hi & PCI_COMMAND_MEMORY) + conf_data |= PCI_COMMAND_MEMORY; + break; + case PCI_STATUS: + conf_data |= PCI_STATUS_66MHZ; + conf_data |= PCI_STATUS_FAST_BACK; + _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); + if (lo & SB_PARE_ERR_FLAG) + conf_data |= PCI_STATUS_PARITY; + conf_data |= PCI_STATUS_DEVSEL_MEDIUM; + break; + case PCI_CLASS_REVISION: + _rdmsr(USB_MSR_REG(USB_CAP), &hi, &lo); + conf_data = lo & 0x000000ff; + conf_data |= (CS5536_EHCI_CLASS_CODE << 8); + break; + case PCI_CACHE_LINE_SIZE: + conf_data = + CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE, + PCI_NORMAL_LATENCY_TIMER); + break; + case PCI_BAR0_REG: + _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); + if (lo & SOFT_BAR_EHCI_FLAG) { + conf_data = CS5536_EHCI_RANGE | + PCI_BASE_ADDRESS_SPACE_MEMORY; + lo &= ~SOFT_BAR_EHCI_FLAG; + _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); + } else { + _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); + conf_data = lo & 0xfffff000; + } + break; + case PCI_CARDBUS_CIS: + conf_data = PCI_CARDBUS_CIS_POINTER; + break; + case PCI_SUBSYSTEM_VENDOR_ID: + conf_data = + CFG_PCI_VENDOR_ID(CS5536_EHCI_SUB_ID, CS5536_SUB_VENDOR_ID); + break; + case PCI_ROM_ADDRESS: + conf_data = PCI_EXPANSION_ROM_BAR; + break; + case PCI_CAPABILITY_LIST: + conf_data = PCI_CAPLIST_USB_POINTER; + break; + case PCI_INTERRUPT_LINE: + conf_data = + CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_USB_INTR); + break; + case PCI_EHCI_LEGSMIEN_REG: + _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); + conf_data = (hi & 0x003f0000) >> 16; + break; + case PCI_EHCI_LEGSMISTS_REG: + _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); + conf_data = (hi & 0x3f000000) >> 24; + break; + case PCI_EHCI_FLADJ_REG: + _rdmsr(USB_MSR_REG(USB_EHCI), &hi, &lo); + conf_data = hi & 0x00003f00; + break; + default: + break; + } + + return conf_data; +} diff --git a/arch/mips/loongson2ef/common/cs5536/cs5536_ide.c b/arch/mips/loongson2ef/common/cs5536/cs5536_ide.c new file mode 100644 index 000000000000..bb933294b092 --- /dev/null +++ b/arch/mips/loongson2ef/common/cs5536/cs5536_ide.c @@ -0,0 +1,188 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * the IDE Virtual Support Module of AMD CS5536 + * + * Copyright (C) 2007 Lemote, Inc. + * Author : jlliu, liujl@lemote.com + * + * Copyright (C) 2009 Lemote, Inc. + * Author: Wu Zhangjin, wuzhangjin@gmail.com + */ + +#include <cs5536/cs5536.h> +#include <cs5536/cs5536_pci.h> + +void pci_ide_write_reg(int reg, u32 value) +{ + u32 hi = 0, lo = value; + + switch (reg) { + case PCI_COMMAND: + _rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo); + if (value & PCI_COMMAND_MASTER) + lo |= (0x03 << 4); + else + lo &= ~(0x03 << 4); + _wrmsr(GLIU_MSR_REG(GLIU_PAE), hi, lo); + break; + case PCI_STATUS: + if (value & PCI_STATUS_PARITY) { + _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); + if (lo & SB_PARE_ERR_FLAG) { + lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG; + _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo); + } + } + break; + case PCI_CACHE_LINE_SIZE: + value &= 0x0000ff00; + _rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo); + hi &= 0xffffff00; + hi |= (value >> 8); + _wrmsr(SB_MSR_REG(SB_CTRL), hi, lo); + break; + case PCI_BAR4_REG: + if (value == PCI_BAR_RANGE_MASK) { + _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); + lo |= SOFT_BAR_IDE_FLAG; + _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); + } else if (value & 0x01) { + _rdmsr(IDE_MSR_REG(IDE_IO_BAR), &hi, &lo); + lo = (value & 0xfffffff0) | 0x1; + _wrmsr(IDE_MSR_REG(IDE_IO_BAR), hi, lo); + + value &= 0xfffffffc; + hi = 0x60000000 | ((value & 0x000ff000) >> 12); + lo = 0x000ffff0 | ((value & 0x00000fff) << 20); + _wrmsr(GLIU_MSR_REG(GLIU_IOD_BM2), hi, lo); + } + break; + case PCI_IDE_CFG_REG: + if (value == CS5536_IDE_FLASH_SIGNATURE) { + _rdmsr(DIVIL_MSR_REG(DIVIL_BALL_OPTS), &hi, &lo); + lo |= 0x01; + _wrmsr(DIVIL_MSR_REG(DIVIL_BALL_OPTS), hi, lo); + } else { + _rdmsr(IDE_MSR_REG(IDE_CFG), &hi, &lo); + lo = value; + _wrmsr(IDE_MSR_REG(IDE_CFG), hi, lo); + } + break; + case PCI_IDE_DTC_REG: + _rdmsr(IDE_MSR_REG(IDE_DTC), &hi, &lo); + lo = value; + _wrmsr(IDE_MSR_REG(IDE_DTC), hi, lo); + break; + case PCI_IDE_CAST_REG: + _rdmsr(IDE_MSR_REG(IDE_CAST), &hi, &lo); + lo = value; + _wrmsr(IDE_MSR_REG(IDE_CAST), hi, lo); + break; + case PCI_IDE_ETC_REG: + _rdmsr(IDE_MSR_REG(IDE_ETC), &hi, &lo); + lo = value; + _wrmsr(IDE_MSR_REG(IDE_ETC), hi, lo); + break; + case PCI_IDE_PM_REG: + _rdmsr(IDE_MSR_REG(IDE_INTERNAL_PM), &hi, &lo); + lo = value; + _wrmsr(IDE_MSR_REG(IDE_INTERNAL_PM), hi, lo); + break; + default: + break; + } +} + +u32 pci_ide_read_reg(int reg) +{ + u32 conf_data = 0; + u32 hi, lo; + + switch (reg) { + case PCI_VENDOR_ID: + conf_data = + CFG_PCI_VENDOR_ID(CS5536_IDE_DEVICE_ID, CS5536_VENDOR_ID); + break; + case PCI_COMMAND: + _rdmsr(IDE_MSR_REG(IDE_IO_BAR), &hi, &lo); + if (lo & 0xfffffff0) + conf_data |= PCI_COMMAND_IO; + _rdmsr(GLIU_MSR_REG(GLIU_PAE), &hi, &lo); + if ((lo & 0x30) == 0x30) + conf_data |= PCI_COMMAND_MASTER; + break; + case PCI_STATUS: + conf_data |= PCI_STATUS_66MHZ; + conf_data |= PCI_STATUS_FAST_BACK; + _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); + if (lo & SB_PARE_ERR_FLAG) + conf_data |= PCI_STATUS_PARITY; + conf_data |= PCI_STATUS_DEVSEL_MEDIUM; + break; + case PCI_CLASS_REVISION: + _rdmsr(IDE_MSR_REG(IDE_CAP), &hi, &lo); + conf_data = lo & 0x000000ff; + conf_data |= (CS5536_IDE_CLASS_CODE << 8); + break; + case PCI_CACHE_LINE_SIZE: + _rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo); + hi &= 0x000000f8; + conf_data = CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE, hi); + break; + case PCI_BAR4_REG: + _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); + if (lo & SOFT_BAR_IDE_FLAG) { + conf_data = CS5536_IDE_RANGE | + PCI_BASE_ADDRESS_SPACE_IO; + lo &= ~SOFT_BAR_IDE_FLAG; + _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); + } else { + _rdmsr(IDE_MSR_REG(IDE_IO_BAR), &hi, &lo); + conf_data = lo & 0xfffffff0; + conf_data |= 0x01; + conf_data &= ~0x02; + } + break; + case PCI_CARDBUS_CIS: + conf_data = PCI_CARDBUS_CIS_POINTER; + break; + case PCI_SUBSYSTEM_VENDOR_ID: + conf_data = + CFG_PCI_VENDOR_ID(CS5536_IDE_SUB_ID, CS5536_SUB_VENDOR_ID); + break; + case PCI_ROM_ADDRESS: + conf_data = PCI_EXPANSION_ROM_BAR; + break; + case PCI_CAPABILITY_LIST: + conf_data = PCI_CAPLIST_POINTER; + break; + case PCI_INTERRUPT_LINE: + conf_data = + CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_IDE_INTR); + break; + case PCI_IDE_CFG_REG: + _rdmsr(IDE_MSR_REG(IDE_CFG), &hi, &lo); + conf_data = lo; + break; + case PCI_IDE_DTC_REG: + _rdmsr(IDE_MSR_REG(IDE_DTC), &hi, &lo); + conf_data = lo; + break; + case PCI_IDE_CAST_REG: + _rdmsr(IDE_MSR_REG(IDE_CAST), &hi, &lo); + conf_data = lo; + break; + case PCI_IDE_ETC_REG: + _rdmsr(IDE_MSR_REG(IDE_ETC), &hi, &lo); + conf_data = lo; + break; + case PCI_IDE_PM_REG: + _rdmsr(IDE_MSR_REG(IDE_INTERNAL_PM), &hi, &lo); + conf_data = lo; + break; + default: + break; + } + + return conf_data; +} diff --git a/arch/mips/loongson2ef/common/cs5536/cs5536_isa.c b/arch/mips/loongson2ef/common/cs5536/cs5536_isa.c new file mode 100644 index 000000000000..5ad38f86ee62 --- /dev/null +++ b/arch/mips/loongson2ef/common/cs5536/cs5536_isa.c @@ -0,0 +1,326 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * the ISA Virtual Support Module of AMD CS5536 + * + * Copyright (C) 2007 Lemote, Inc. + * Author : jlliu, liujl@lemote.com + * + * Copyright (C) 2009 Lemote, Inc. + * Author: Wu Zhangjin, wuzhangjin@gmail.com + */ + +#include <linux/pci.h> +#include <cs5536/cs5536.h> +#include <cs5536/cs5536_pci.h> + +/* common variables for PCI_ISA_READ/WRITE_BAR */ +static const u32 divil_msr_reg[6] = { + DIVIL_MSR_REG(DIVIL_LBAR_SMB), DIVIL_MSR_REG(DIVIL_LBAR_GPIO), + DIVIL_MSR_REG(DIVIL_LBAR_MFGPT), DIVIL_MSR_REG(DIVIL_LBAR_IRQ), + DIVIL_MSR_REG(DIVIL_LBAR_PMS), DIVIL_MSR_REG(DIVIL_LBAR_ACPI), +}; + +static const u32 soft_bar_flag[6] = { + SOFT_BAR_SMB_FLAG, SOFT_BAR_GPIO_FLAG, SOFT_BAR_MFGPT_FLAG, + SOFT_BAR_IRQ_FLAG, SOFT_BAR_PMS_FLAG, SOFT_BAR_ACPI_FLAG, +}; + +static const u32 sb_msr_reg[6] = { + SB_MSR_REG(SB_R0), SB_MSR_REG(SB_R1), SB_MSR_REG(SB_R2), + SB_MSR_REG(SB_R3), SB_MSR_REG(SB_R4), SB_MSR_REG(SB_R5), +}; + +static const u32 bar_space_range[6] = { + CS5536_SMB_RANGE, CS5536_GPIO_RANGE, CS5536_MFGPT_RANGE, + CS5536_IRQ_RANGE, CS5536_PMS_RANGE, CS5536_ACPI_RANGE, +}; + +static const int bar_space_len[6] = { + CS5536_SMB_LENGTH, CS5536_GPIO_LENGTH, CS5536_MFGPT_LENGTH, + CS5536_IRQ_LENGTH, CS5536_PMS_LENGTH, CS5536_ACPI_LENGTH, +}; + +/* + * enable the divil module bar space. + * + * For all the DIVIL module LBAR, you should control the DIVIL LBAR reg + * and the RCONFx(0~5) reg to use the modules. + */ +static void divil_lbar_enable(void) +{ + u32 hi, lo; + int offset; + + /* + * The DIVIL IRQ is not used yet. and make the RCONF0 reserved. + */ + + for (offset = DIVIL_LBAR_SMB; offset <= DIVIL_LBAR_PMS; offset++) { + _rdmsr(DIVIL_MSR_REG(offset), &hi, &lo); + hi |= 0x01; + _wrmsr(DIVIL_MSR_REG(offset), hi, lo); + } +} + +/* + * disable the divil module bar space. + */ +static void divil_lbar_disable(void) +{ + u32 hi, lo; + int offset; + + for (offset = DIVIL_LBAR_SMB; offset <= DIVIL_LBAR_PMS; offset++) { + _rdmsr(DIVIL_MSR_REG(offset), &hi, &lo); + hi &= ~0x01; + _wrmsr(DIVIL_MSR_REG(offset), hi, lo); + } +} + +/* + * BAR write: write value to the n BAR + */ + +void pci_isa_write_bar(int n, u32 value) +{ + u32 hi = 0, lo = value; + + if (value == PCI_BAR_RANGE_MASK) { + _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); + lo |= soft_bar_flag[n]; + _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); + } else if (value & 0x01) { + /* NATIVE reg */ + hi = 0x0000f001; + lo &= bar_space_range[n]; + _wrmsr(divil_msr_reg[n], hi, lo); + + /* RCONFx is 4bytes in units for I/O space */ + hi = ((value & 0x000ffffc) << 12) | + ((bar_space_len[n] - 4) << 12) | 0x01; + lo = ((value & 0x000ffffc) << 12) | 0x01; + _wrmsr(sb_msr_reg[n], hi, lo); + } +} + +/* + * BAR read: read the n BAR + */ + +u32 pci_isa_read_bar(int n) +{ + u32 conf_data = 0; + u32 hi, lo; + + _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); + if (lo & soft_bar_flag[n]) { + conf_data = bar_space_range[n] | PCI_BASE_ADDRESS_SPACE_IO; + lo &= ~soft_bar_flag[n]; + _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); + } else { + _rdmsr(divil_msr_reg[n], &hi, &lo); + conf_data = lo & bar_space_range[n]; + conf_data |= 0x01; + conf_data &= ~0x02; + } + return conf_data; +} + +/* + * isa_write: ISA write transfer + * + * We assume that this is not a bus master transfer. + */ +void pci_isa_write_reg(int reg, u32 value) +{ + u32 hi = 0, lo = value; + u32 temp; + + switch (reg) { + case PCI_COMMAND: + if (value & PCI_COMMAND_IO) + divil_lbar_enable(); + else + divil_lbar_disable(); + break; + case PCI_STATUS: + _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); + temp = lo & 0x0000ffff; + if ((value & PCI_STATUS_SIG_TARGET_ABORT) && + (lo & SB_TAS_ERR_EN)) + temp |= SB_TAS_ERR_FLAG; + + if ((value & PCI_STATUS_REC_TARGET_ABORT) && + (lo & SB_TAR_ERR_EN)) + temp |= SB_TAR_ERR_FLAG; + + if ((value & PCI_STATUS_REC_MASTER_ABORT) + && (lo & SB_MAR_ERR_EN)) + temp |= SB_MAR_ERR_FLAG; + + if ((value & PCI_STATUS_DETECTED_PARITY) + && (lo & SB_PARE_ERR_EN)) + temp |= SB_PARE_ERR_FLAG; + + lo = temp; + _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo); + break; + case PCI_CACHE_LINE_SIZE: + value &= 0x0000ff00; + _rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo); + hi &= 0xffffff00; + hi |= (value >> 8); + _wrmsr(SB_MSR_REG(SB_CTRL), hi, lo); + break; + case PCI_BAR0_REG: + pci_isa_write_bar(0, value); + break; + case PCI_BAR1_REG: + pci_isa_write_bar(1, value); + break; + case PCI_BAR2_REG: + pci_isa_write_bar(2, value); + break; + case PCI_BAR3_REG: + pci_isa_write_bar(3, value); + break; + case PCI_BAR4_REG: + pci_isa_write_bar(4, value); + break; + case PCI_BAR5_REG: + pci_isa_write_bar(5, value); + break; + case PCI_UART1_INT_REG: + _rdmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), &hi, &lo); + /* disable uart1 interrupt in PIC */ + lo &= ~(0xf << 24); + if (value) /* enable uart1 interrupt in PIC */ + lo |= (CS5536_UART1_INTR << 24); + _wrmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), hi, lo); + break; + case PCI_UART2_INT_REG: + _rdmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), &hi, &lo); + /* disable uart2 interrupt in PIC */ + lo &= ~(0xf << 28); + if (value) /* enable uart2 interrupt in PIC */ + lo |= (CS5536_UART2_INTR << 28); + _wrmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), hi, lo); + break; + case PCI_ISA_FIXUP_REG: + if (value) { + /* enable the TARGET ABORT/MASTER ABORT etc. */ + _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); + lo |= 0x00000063; + _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo); + } + + default: + /* ALL OTHER PCI CONFIG SPACE HEADER IS NOT IMPLEMENTED. */ + break; + } +} + +/* + * isa_read: ISA read transfers + * + * We assume that this is not a bus master transfer. + */ +u32 pci_isa_read_reg(int reg) +{ + u32 conf_data = 0; + u32 hi, lo; + + switch (reg) { + case PCI_VENDOR_ID: + conf_data = + CFG_PCI_VENDOR_ID(CS5536_ISA_DEVICE_ID, CS5536_VENDOR_ID); + break; + case PCI_COMMAND: + /* we just check the first LBAR for the IO enable bit, */ + /* maybe we should changed later. */ + _rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_SMB), &hi, &lo); + if (hi & 0x01) + conf_data |= PCI_COMMAND_IO; + break; + case PCI_STATUS: + conf_data |= PCI_STATUS_66MHZ; + conf_data |= PCI_STATUS_DEVSEL_MEDIUM; + conf_data |= PCI_STATUS_FAST_BACK; + + _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); + if (lo & SB_TAS_ERR_FLAG) + conf_data |= PCI_STATUS_SIG_TARGET_ABORT; + if (lo & SB_TAR_ERR_FLAG) + conf_data |= PCI_STATUS_REC_TARGET_ABORT; + if (lo & SB_MAR_ERR_FLAG) + conf_data |= PCI_STATUS_REC_MASTER_ABORT; + if (lo & SB_PARE_ERR_FLAG) + conf_data |= PCI_STATUS_DETECTED_PARITY; + break; + case PCI_CLASS_REVISION: + _rdmsr(GLCP_MSR_REG(GLCP_CHIP_REV_ID), &hi, &lo); + conf_data = lo & 0x000000ff; + conf_data |= (CS5536_ISA_CLASS_CODE << 8); + break; + case PCI_CACHE_LINE_SIZE: + _rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo); + hi &= 0x000000f8; + conf_data = CFG_PCI_CACHE_LINE_SIZE(PCI_BRIDGE_HEADER_TYPE, hi); + break; + /* + * we only use the LBAR of DIVIL, no RCONF used. + * all of them are IO space. + */ + case PCI_BAR0_REG: + return pci_isa_read_bar(0); + break; + case PCI_BAR1_REG: + return pci_isa_read_bar(1); + break; + case PCI_BAR2_REG: + return pci_isa_read_bar(2); + break; + case PCI_BAR3_REG: + break; + case PCI_BAR4_REG: + return pci_isa_read_bar(4); + break; + case PCI_BAR5_REG: + return pci_isa_read_bar(5); + break; + case PCI_CARDBUS_CIS: + conf_data = PCI_CARDBUS_CIS_POINTER; + break; + case PCI_SUBSYSTEM_VENDOR_ID: + conf_data = + CFG_PCI_VENDOR_ID(CS5536_ISA_SUB_ID, CS5536_SUB_VENDOR_ID); + break; + case PCI_ROM_ADDRESS: + conf_data = PCI_EXPANSION_ROM_BAR; + break; + case PCI_CAPABILITY_LIST: + conf_data = PCI_CAPLIST_POINTER; + break; + case PCI_INTERRUPT_LINE: + /* no interrupt used here */ + conf_data = CFG_PCI_INTERRUPT_LINE(0x00, 0x00); + break; + default: + break; + } + + return conf_data; +} + +/* + * The mfgpt timer interrupt is running early, so we must keep the south bridge + * mmio always enabled. Otherwise we may race with the PCI configuration which + * may temporarily disable it. When that happens and the timer interrupt fires, + * we are not able to clear it and the system will hang. + */ +static void cs5536_isa_mmio_always_on(struct pci_dev *dev) +{ + dev->mmio_always_on = 1; +} +DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, + PCI_CLASS_BRIDGE_ISA, 8, cs5536_isa_mmio_always_on); diff --git a/arch/mips/loongson2ef/common/cs5536/cs5536_mfgpt.c b/arch/mips/loongson2ef/common/cs5536/cs5536_mfgpt.c new file mode 100644 index 000000000000..30af1b7c7529 --- /dev/null +++ b/arch/mips/loongson2ef/common/cs5536/cs5536_mfgpt.c @@ -0,0 +1,207 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * CS5536 General timer functions + * + * Copyright (C) 2007 Lemote Inc. & Institute of Computing Technology + * Author: Yanhua, yanh@lemote.com + * + * Copyright (C) 2009 Lemote Inc. + * Author: Wu zhangjin, wuzhangjin@gmail.com + * + * Reference: AMD Geode(TM) CS5536 Companion Device Data Book + */ + +#include <linux/io.h> +#include <linux/init.h> +#include <linux/export.h> +#include <linux/jiffies.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <linux/clockchips.h> + +#include <asm/time.h> + +#include <cs5536/cs5536_mfgpt.h> + +static DEFINE_RAW_SPINLOCK(mfgpt_lock); + +static u32 mfgpt_base; + +/* + * Initialize the MFGPT timer. + * + * This is also called after resume to bring the MFGPT into operation again. + */ + +/* disable counter */ +void disable_mfgpt0_counter(void) +{ + outw(inw(MFGPT0_SETUP) & 0x7fff, MFGPT0_SETUP); +} +EXPORT_SYMBOL(disable_mfgpt0_counter); + +/* enable counter, comparator2 to event mode, 14.318MHz clock */ +void enable_mfgpt0_counter(void) +{ + outw(0xe310, MFGPT0_SETUP); +} +EXPORT_SYMBOL(enable_mfgpt0_counter); + +static int mfgpt_timer_set_periodic(struct clock_event_device *evt) +{ + raw_spin_lock(&mfgpt_lock); + + outw(COMPARE, MFGPT0_CMP2); /* set comparator2 */ + outw(0, MFGPT0_CNT); /* set counter to 0 */ + enable_mfgpt0_counter(); + + raw_spin_unlock(&mfgpt_lock); + return 0; +} + +static int mfgpt_timer_shutdown(struct clock_event_device *evt) +{ + if (clockevent_state_periodic(evt) || clockevent_state_oneshot(evt)) { + raw_spin_lock(&mfgpt_lock); + disable_mfgpt0_counter(); + raw_spin_unlock(&mfgpt_lock); + } + + return 0; +} + +static struct clock_event_device mfgpt_clockevent = { + .name = "mfgpt", + .features = CLOCK_EVT_FEAT_PERIODIC, + + /* The oneshot mode have very high deviation, don't use it! */ + .set_state_shutdown = mfgpt_timer_shutdown, + .set_state_periodic = mfgpt_timer_set_periodic, + .irq = CS5536_MFGPT_INTR, +}; + +static irqreturn_t timer_interrupt(int irq, void *dev_id) +{ + u32 basehi; + + /* + * get MFGPT base address + * + * NOTE: do not remove me, it's need for the value of mfgpt_base is + * variable + */ + _rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_MFGPT), &basehi, &mfgpt_base); + + /* ack */ + outw(inw(MFGPT0_SETUP) | 0x4000, MFGPT0_SETUP); + + mfgpt_clockevent.event_handler(&mfgpt_clockevent); + + return IRQ_HANDLED; +} + +static struct irqaction irq5 = { + .handler = timer_interrupt, + .flags = IRQF_NOBALANCING | IRQF_TIMER, + .name = "timer" +}; + +/* + * Initialize the conversion factor and the min/max deltas of the clock event + * structure and register the clock event source with the framework. + */ +void __init setup_mfgpt0_timer(void) +{ + u32 basehi; + struct clock_event_device *cd = &mfgpt_clockevent; + unsigned int cpu = smp_processor_id(); + + cd->cpumask = cpumask_of(cpu); + clockevent_set_clock(cd, MFGPT_TICK_RATE); + cd->max_delta_ns = clockevent_delta2ns(0xffff, cd); + cd->max_delta_ticks = 0xffff; + cd->min_delta_ns = clockevent_delta2ns(0xf, cd); + cd->min_delta_ticks = 0xf; + + /* Enable MFGPT0 Comparator 2 Output to the Interrupt Mapper */ + _wrmsr(DIVIL_MSR_REG(MFGPT_IRQ), 0, 0x100); + + /* Enable Interrupt Gate 5 */ + _wrmsr(DIVIL_MSR_REG(PIC_ZSEL_LOW), 0, 0x50000); + + /* get MFGPT base address */ + _rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_MFGPT), &basehi, &mfgpt_base); + + clockevents_register_device(cd); + + setup_irq(CS5536_MFGPT_INTR, &irq5); +} + +/* + * Since the MFGPT overflows every tick, its not very useful + * to just read by itself. So use jiffies to emulate a free + * running counter: + */ +static u64 mfgpt_read(struct clocksource *cs) +{ + unsigned long flags; + int count; + u32 jifs; + static int old_count; + static u32 old_jifs; + + raw_spin_lock_irqsave(&mfgpt_lock, flags); + /* + * Although our caller may have the read side of xtime_lock, + * this is now a seqlock, and we are cheating in this routine + * by having side effects on state that we cannot undo if + * there is a collision on the seqlock and our caller has to + * retry. (Namely, old_jifs and old_count.) So we must treat + * jiffies as volatile despite the lock. We read jiffies + * before latching the timer count to guarantee that although + * the jiffies value might be older than the count (that is, + * the counter may underflow between the last point where + * jiffies was incremented and the point where we latch the + * count), it cannot be newer. + */ + jifs = jiffies; + /* read the count */ + count = inw(MFGPT0_CNT); + + /* + * It's possible for count to appear to go the wrong way for this + * reason: + * + * The timer counter underflows, but we haven't handled the resulting + * interrupt and incremented jiffies yet. + * + * Previous attempts to handle these cases intelligently were buggy, so + * we just do the simple thing now. + */ + if (count < old_count && jifs == old_jifs) + count = old_count; + + old_count = count; + old_jifs = jifs; + + raw_spin_unlock_irqrestore(&mfgpt_lock, flags); + + return (u64) (jifs * COMPARE) + count; +} + +static struct clocksource clocksource_mfgpt = { + .name = "mfgpt", + .rating = 120, /* Functional for real use, but not desired */ + .read = mfgpt_read, + .mask = CLOCKSOURCE_MASK(32), +}; + +int __init init_mfgpt_clocksource(void) +{ + if (num_possible_cpus() > 1) /* MFGPT does not scale! */ + return 0; + + return clocksource_register_hz(&clocksource_mfgpt, MFGPT_TICK_RATE); +} + +arch_initcall(init_mfgpt_clocksource); diff --git a/arch/mips/loongson2ef/common/cs5536/cs5536_ohci.c b/arch/mips/loongson2ef/common/cs5536/cs5536_ohci.c new file mode 100644 index 000000000000..71a52b120317 --- /dev/null +++ b/arch/mips/loongson2ef/common/cs5536/cs5536_ohci.c @@ -0,0 +1,145 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * the OHCI Virtual Support Module of AMD CS5536 + * + * Copyright (C) 2007 Lemote, Inc. + * Author : jlliu, liujl@lemote.com + * + * Copyright (C) 2009 Lemote, Inc. + * Author: Wu Zhangjin, wuzhangjin@gmail.com + */ + +#include <cs5536/cs5536.h> +#include <cs5536/cs5536_pci.h> + +void pci_ohci_write_reg(int reg, u32 value) +{ + u32 hi = 0, lo = value; + + switch (reg) { + case PCI_COMMAND: + _rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo); + if (value & PCI_COMMAND_MASTER) + hi |= PCI_COMMAND_MASTER; + else + hi &= ~PCI_COMMAND_MASTER; + + if (value & PCI_COMMAND_MEMORY) + hi |= PCI_COMMAND_MEMORY; + else + hi &= ~PCI_COMMAND_MEMORY; + _wrmsr(USB_MSR_REG(USB_OHCI), hi, lo); + break; + case PCI_STATUS: + if (value & PCI_STATUS_PARITY) { + _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); + if (lo & SB_PARE_ERR_FLAG) { + lo = (lo & 0x0000ffff) | SB_PARE_ERR_FLAG; + _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo); + } + } + break; + case PCI_BAR0_REG: + if (value == PCI_BAR_RANGE_MASK) { + _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); + lo |= SOFT_BAR_OHCI_FLAG; + _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); + } else if ((value & 0x01) == 0x00) { + _rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo); + lo = value; + _wrmsr(USB_MSR_REG(USB_OHCI), hi, lo); + + value &= 0xfffffff0; + hi = 0x40000000 | ((value & 0xff000000) >> 24); + lo = 0x000fffff | ((value & 0x00fff000) << 8); + _wrmsr(GLIU_MSR_REG(GLIU_P2D_BM3), hi, lo); + } + break; + case PCI_OHCI_INT_REG: + _rdmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), &hi, &lo); + lo &= ~(0xf << PIC_YSEL_LOW_USB_SHIFT); + if (value) /* enable all the usb interrupt in PIC */ + lo |= (CS5536_USB_INTR << PIC_YSEL_LOW_USB_SHIFT); + _wrmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), hi, lo); + break; + default: + break; + } +} + +u32 pci_ohci_read_reg(int reg) +{ + u32 conf_data = 0; + u32 hi, lo; + + switch (reg) { + case PCI_VENDOR_ID: + conf_data = + CFG_PCI_VENDOR_ID(CS5536_OHCI_DEVICE_ID, CS5536_VENDOR_ID); + break; + case PCI_COMMAND: + _rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo); + if (hi & PCI_COMMAND_MASTER) + conf_data |= PCI_COMMAND_MASTER; + if (hi & PCI_COMMAND_MEMORY) + conf_data |= PCI_COMMAND_MEMORY; + break; + case PCI_STATUS: + conf_data |= PCI_STATUS_66MHZ; + conf_data |= PCI_STATUS_FAST_BACK; + _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); + if (lo & SB_PARE_ERR_FLAG) + conf_data |= PCI_STATUS_PARITY; + conf_data |= PCI_STATUS_DEVSEL_MEDIUM; + break; + case PCI_CLASS_REVISION: + _rdmsr(USB_MSR_REG(USB_CAP), &hi, &lo); + conf_data = lo & 0x000000ff; + conf_data |= (CS5536_OHCI_CLASS_CODE << 8); + break; + case PCI_CACHE_LINE_SIZE: + conf_data = + CFG_PCI_CACHE_LINE_SIZE(PCI_NORMAL_HEADER_TYPE, + PCI_NORMAL_LATENCY_TIMER); + break; + case PCI_BAR0_REG: + _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); + if (lo & SOFT_BAR_OHCI_FLAG) { + conf_data = CS5536_OHCI_RANGE | + PCI_BASE_ADDRESS_SPACE_MEMORY; + lo &= ~SOFT_BAR_OHCI_FLAG; + _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); + } else { + _rdmsr(USB_MSR_REG(USB_OHCI), &hi, &lo); + conf_data = lo & 0xffffff00; + conf_data &= ~0x0000000f; /* 32bit mem */ + } + break; + case PCI_CARDBUS_CIS: + conf_data = PCI_CARDBUS_CIS_POINTER; + break; + case PCI_SUBSYSTEM_VENDOR_ID: + conf_data = + CFG_PCI_VENDOR_ID(CS5536_OHCI_SUB_ID, CS5536_SUB_VENDOR_ID); + break; + case PCI_ROM_ADDRESS: + conf_data = PCI_EXPANSION_ROM_BAR; + break; + case PCI_CAPABILITY_LIST: + conf_data = PCI_CAPLIST_USB_POINTER; + break; + case PCI_INTERRUPT_LINE: + conf_data = + CFG_PCI_INTERRUPT_LINE(PCI_DEFAULT_PIN, CS5536_USB_INTR); + break; + case PCI_OHCI_INT_REG: + _rdmsr(DIVIL_MSR_REG(PIC_YSEL_LOW), &hi, &lo); + if (((lo >> PIC_YSEL_LOW_USB_SHIFT) & 0xf) == CS5536_USB_INTR) + conf_data = 1; + break; + default: + break; + } + + return conf_data; +} diff --git a/arch/mips/loongson2ef/common/cs5536/cs5536_pci.c b/arch/mips/loongson2ef/common/cs5536/cs5536_pci.c new file mode 100644 index 000000000000..202c89b568ba --- /dev/null +++ b/arch/mips/loongson2ef/common/cs5536/cs5536_pci.c @@ -0,0 +1,84 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * read/write operation to the PCI config space of CS5536 + * + * Copyright (C) 2007 Lemote, Inc. + * Author : jlliu, liujl@lemote.com + * + * Copyright (C) 2009 Lemote, Inc. + * Author: Wu Zhangjin, wuzhangjin@gmail.com + * + * the Virtual Support Module(VSM) for virtulizing the PCI + * configure space are defined in cs5536_modulename.c respectively, + * + * after this virtulizing, user can access the PCI configure space + * directly as a normal multi-function PCI device which follows + * the PCI-2.2 spec. + */ + +#include <linux/types.h> +#include <cs5536/cs5536_pci.h> +#include <cs5536/cs5536_vsm.h> + +enum { + CS5536_FUNC_START = -1, + CS5536_ISA_FUNC, + reserved_func, + CS5536_IDE_FUNC, + CS5536_ACC_FUNC, + CS5536_OHCI_FUNC, + CS5536_EHCI_FUNC, + CS5536_FUNC_END, +}; + +static const cs5536_pci_vsm_write vsm_conf_write[] = { + [CS5536_ISA_FUNC] = pci_isa_write_reg, + [reserved_func] = NULL, + [CS5536_IDE_FUNC] = pci_ide_write_reg, + [CS5536_ACC_FUNC] = pci_acc_write_reg, + [CS5536_OHCI_FUNC] = pci_ohci_write_reg, + [CS5536_EHCI_FUNC] = pci_ehci_write_reg, +}; + +static const cs5536_pci_vsm_read vsm_conf_read[] = { + [CS5536_ISA_FUNC] = pci_isa_read_reg, + [reserved_func] = NULL, + [CS5536_IDE_FUNC] = pci_ide_read_reg, + [CS5536_ACC_FUNC] = pci_acc_read_reg, + [CS5536_OHCI_FUNC] = pci_ohci_read_reg, + [CS5536_EHCI_FUNC] = pci_ehci_read_reg, +}; + +/* + * write to PCI config space and transfer it to MSR write. + */ +void cs5536_pci_conf_write4(int function, int reg, u32 value) +{ + if ((function <= CS5536_FUNC_START) || (function >= CS5536_FUNC_END)) + return; + if ((reg < 0) || (reg > 0x100) || ((reg & 0x03) != 0)) + return; + + if (vsm_conf_write[function] != NULL) + vsm_conf_write[function](reg, value); +} + +/* + * read PCI config space and transfer it to MSR access. + */ +u32 cs5536_pci_conf_read4(int function, int reg) +{ + u32 data = 0; + + if ((function <= CS5536_FUNC_START) || (function >= CS5536_FUNC_END)) + return 0; + if ((reg < 0) || ((reg & 0x03) != 0)) + return 0; + if (reg > 0x100) + return 0xffffffff; + + if (vsm_conf_read[function] != NULL) + data = vsm_conf_read[function](reg); + + return data; +} diff --git a/arch/mips/loongson2ef/common/env.c b/arch/mips/loongson2ef/common/env.c new file mode 100644 index 000000000000..6f20bdf9b242 --- /dev/null +++ b/arch/mips/loongson2ef/common/env.c @@ -0,0 +1,53 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Based on Ocelot Linux port, which is + * Copyright 2001 MontaVista Software Inc. + * Author: jsun@mvista.com or jsun@junsun.net + * + * Copyright 2003 ICT CAS + * Author: Michael Guo <guoyi@ict.ac.cn> + * + * Copyright (C) 2007 Lemote Inc. & Institute of Computing Technology + * Author: Fuxin Zhang, zhangfx@lemote.com + * + * Copyright (C) 2009 Lemote Inc. + * Author: Wu Zhangjin, wuzhangjin@gmail.com + */ +#include <linux/export.h> +#include <asm/bootinfo.h> +#include <asm/fw/fw.h> +#include <loongson.h> + +u32 cpu_clock_freq; +EXPORT_SYMBOL(cpu_clock_freq); + +void __init prom_init_env(void) +{ + /* pmon passes arguments in 32bit pointers */ + unsigned int processor_id; + + cpu_clock_freq = fw_getenvl("cpuclock"); + memsize = fw_getenvl("memsize"); + highmemsize = fw_getenvl("highmemsize"); + + if (memsize == 0) + memsize = 256; + + pr_info("memsize=%u, highmemsize=%u\n", memsize, highmemsize); + + if (cpu_clock_freq == 0) { + processor_id = (¤t_cpu_data)->processor_id; + switch (processor_id & PRID_REV_MASK) { + case PRID_REV_LOONGSON2E: + cpu_clock_freq = 533080000; + break; + case PRID_REV_LOONGSON2F: + cpu_clock_freq = 797000000; + break; + default: + cpu_clock_freq = 100000000; + break; + } + } + pr_info("CpuClock = %u\n", cpu_clock_freq); +} diff --git a/arch/mips/loongson2ef/common/init.c b/arch/mips/loongson2ef/common/init.c new file mode 100644 index 000000000000..45512178be77 --- /dev/null +++ b/arch/mips/loongson2ef/common/init.c @@ -0,0 +1,52 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2009 Lemote Inc. + * Author: Wu Zhangjin, wuzhangjin@gmail.com + */ + +#include <linux/memblock.h> +#include <asm/bootinfo.h> +#include <asm/traps.h> +#include <asm/smp-ops.h> +#include <asm/cacheflush.h> +#include <asm/fw/fw.h> + +#include <loongson.h> + +/* Loongson CPU address windows config space base address */ +unsigned long __maybe_unused _loongson_addrwincfg_base; + +static void __init mips_nmi_setup(void) +{ + void *base; + extern char except_vec_nmi; + + base = (void *)(CAC_BASE + 0x380); + memcpy(base, &except_vec_nmi, 0x80); + flush_icache_range((unsigned long)base, (unsigned long)base + 0x80); +} + +void __init prom_init(void) +{ +#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG + _loongson_addrwincfg_base = (unsigned long) + ioremap(LOONGSON_ADDRWINCFG_BASE, LOONGSON_ADDRWINCFG_SIZE); +#endif + + fw_init_cmdline(); + prom_init_machtype(); + prom_init_env(); + + /* init base address of io space */ + set_io_port_base((unsigned long) + ioremap(LOONGSON_PCIIO_BASE, LOONGSON_PCIIO_SIZE)); + prom_init_memory(); + + /*init the uart base address */ + prom_init_uart_base(); + board_nmi_handler_setup = mips_nmi_setup; +} + +void __init prom_free_prom_memory(void) +{ +} diff --git a/arch/mips/loongson2ef/common/irq.c b/arch/mips/loongson2ef/common/irq.c new file mode 100644 index 000000000000..0ea93c1c0a97 --- /dev/null +++ b/arch/mips/loongson2ef/common/irq.c @@ -0,0 +1,63 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2007 Lemote Inc. & Institute of Computing Technology + * Author: Fuxin Zhang, zhangfx@lemote.com + */ +#include <linux/delay.h> +#include <linux/interrupt.h> + +#include <loongson.h> +/* + * the first level int-handler will jump here if it is a bonito irq + */ +void bonito_irqdispatch(void) +{ + u32 int_status; + int i; + + /* workaround the IO dma problem: let cpu looping to allow DMA finish */ + int_status = LOONGSON_INTISR; + while (int_status & (1 << 10)) { + udelay(1); + int_status = LOONGSON_INTISR; + } + + /* Get pending sources, masked by current enables */ + int_status = LOONGSON_INTISR & LOONGSON_INTEN; + + if (int_status) { + i = __ffs(int_status); + do_IRQ(LOONGSON_IRQ_BASE + i); + } +} + +asmlinkage void plat_irq_dispatch(void) +{ + unsigned int pending; + + pending = read_c0_cause() & read_c0_status() & ST0_IM; + + /* machine-specific plat_irq_dispatch */ + mach_irq_dispatch(pending); +} + +void __init arch_init_irq(void) +{ + /* + * Clear all of the interrupts while we change the able around a bit. + * int-handler is not on bootstrap + */ + clear_c0_status(ST0_IM | ST0_BEV); + + /* no steer */ + LOONGSON_INTSTEER = 0; + + /* + * Mask out all interrupt by writing "1" to all bit position in + * the interrupt reset reg. + */ + LOONGSON_INTENCLR = ~0; + + /* machine specific irq init */ + mach_init_irq(); +} diff --git a/arch/mips/loongson2ef/common/machtype.c b/arch/mips/loongson2ef/common/machtype.c new file mode 100644 index 000000000000..82f6de49f20f --- /dev/null +++ b/arch/mips/loongson2ef/common/machtype.c @@ -0,0 +1,62 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2009 Lemote Inc. + * Author: Wu Zhangjin, wuzhangjin@gmail.com + * + * Copyright (c) 2009 Zhang Le <r0bertz@gentoo.org> + */ +#include <linux/errno.h> +#include <asm/bootinfo.h> + +#include <loongson.h> +#include <machine.h> + +/* please ensure the length of the machtype string is less than 50 */ +#define MACHTYPE_LEN 50 + +static const char *system_types[] = { + [MACH_LOONGSON_UNKNOWN] = "unknown loongson machine", + [MACH_LEMOTE_FL2E] = "lemote-fuloong-2e-box", + [MACH_LEMOTE_FL2F] = "lemote-fuloong-2f-box", + [MACH_LEMOTE_ML2F7] = "lemote-mengloong-2f-7inches", + [MACH_LEMOTE_YL2F89] = "lemote-yeeloong-2f-8.9inches", + [MACH_DEXXON_GDIUM2F10] = "dexxon-gdium-2f", + [MACH_LEMOTE_NAS] = "lemote-nas-2f", + [MACH_LEMOTE_LL2F] = "lemote-lynloong-2f", + [MACH_LOONGSON_END] = NULL, +}; + +const char *get_system_type(void) +{ + return system_types[mips_machtype]; +} + +void __weak __init mach_prom_init_machtype(void) +{ +} + +void __init prom_init_machtype(void) +{ + char *p, str[MACHTYPE_LEN + 1]; + int machtype = MACH_LEMOTE_FL2E; + + mips_machtype = LOONGSON_MACHTYPE; + + p = strstr(arcs_cmdline, "machtype="); + if (!p) { + mach_prom_init_machtype(); + return; + } + p += strlen("machtype="); + strncpy(str, p, MACHTYPE_LEN); + str[MACHTYPE_LEN] = '\0'; + p = strstr(str, " "); + if (p) + *p = '\0'; + + for (; system_types[machtype]; machtype++) + if (strstr(system_types[machtype], str)) { + mips_machtype = machtype; + break; + } +} diff --git a/arch/mips/loongson2ef/common/mem.c b/arch/mips/loongson2ef/common/mem.c new file mode 100644 index 000000000000..ae21f1c62baa --- /dev/null +++ b/arch/mips/loongson2ef/common/mem.c @@ -0,0 +1,62 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + */ +#include <linux/fs.h> +#include <linux/fcntl.h> +#include <linux/memblock.h> +#include <linux/mm.h> + +#include <asm/bootinfo.h> + +#include <loongson.h> +#include <mem.h> +#include <pci.h> + + +u32 memsize, highmemsize; + +void __init prom_init_memory(void) +{ + add_memory_region(0x0, (memsize << 20), BOOT_MEM_RAM); + + add_memory_region(memsize << 20, LOONGSON_PCI_MEM_START - (memsize << + 20), BOOT_MEM_RESERVED); + +#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG + { + int bit; + + bit = fls(memsize + highmemsize); + if (bit != ffs(memsize + highmemsize)) + bit += 20; + else + bit = bit + 20 - 1; + + /* set cpu window3 to map CPU to DDR: 2G -> 2G */ + LOONGSON_ADDRWIN_CPUTODDR(ADDRWIN_WIN3, 0x80000000ul, + 0x80000000ul, (1 << bit)); + mmiowb(); + } +#endif /* !CONFIG_CPU_SUPPORTS_ADDRWINCFG */ + +#ifdef CONFIG_64BIT + if (highmemsize > 0) + add_memory_region(LOONGSON_HIGHMEM_START, + highmemsize << 20, BOOT_MEM_RAM); + + add_memory_region(LOONGSON_PCI_MEM_END + 1, LOONGSON_HIGHMEM_START - + LOONGSON_PCI_MEM_END - 1, BOOT_MEM_RESERVED); + +#endif /* !CONFIG_64BIT */ +} + +/* override of arch/mips/mm/cache.c: __uncached_access */ +int __uncached_access(struct file *file, unsigned long addr) +{ + if (file->f_flags & O_DSYNC) + return 1; + + return addr >= __pa(high_memory) || + ((addr >= LOONGSON_MMIO_MEM_START) && + (addr < LOONGSON_MMIO_MEM_END)); +} diff --git a/arch/mips/loongson2ef/common/pci.c b/arch/mips/loongson2ef/common/pci.c new file mode 100644 index 000000000000..200916925e95 --- /dev/null +++ b/arch/mips/loongson2ef/common/pci.c @@ -0,0 +1,89 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology + * Author: Fuxin Zhang, zhangfx@lemote.com + */ +#include <linux/pci.h> + +#include <pci.h> +#include <loongson.h> + +static struct resource loongson_pci_mem_resource = { + .name = "pci memory space", + .start = LOONGSON_PCI_MEM_START, + .end = LOONGSON_PCI_MEM_END, + .flags = IORESOURCE_MEM, +}; + +static struct resource loongson_pci_io_resource = { + .name = "pci io space", + .start = LOONGSON_PCI_IO_START, + .end = IO_SPACE_LIMIT, + .flags = IORESOURCE_IO, +}; + +static struct pci_controller loongson_pci_controller = { + .pci_ops = &loongson_pci_ops, + .io_resource = &loongson_pci_io_resource, + .mem_resource = &loongson_pci_mem_resource, + .mem_offset = 0x00000000UL, + .io_offset = 0x00000000UL, +}; + +static void __init setup_pcimap(void) +{ + /* + * local to PCI mapping for CPU accessing PCI space + * CPU address space [256M,448M] is window for accessing pci space + * we set pcimap_lo[0,1,2] to map it to pci space[0M,64M], [320M,448M] + * + * pcimap: PCI_MAP2 PCI_Mem_Lo2 PCI_Mem_Lo1 PCI_Mem_Lo0 + * [<2G] [384M,448M] [320M,384M] [0M,64M] + */ + LOONGSON_PCIMAP = LOONGSON_PCIMAP_PCIMAP_2 | + LOONGSON_PCIMAP_WIN(2, LOONGSON_PCILO2_BASE) | + LOONGSON_PCIMAP_WIN(1, LOONGSON_PCILO1_BASE) | + LOONGSON_PCIMAP_WIN(0, 0); + + /* + * PCI-DMA to local mapping: [2G,2G+256M] -> [0M,256M] + */ + LOONGSON_PCIBASE0 = 0x80000000ul; /* base: 2G -> mmap: 0M */ + /* size: 256M, burst transmission, pre-fetch enable, 64bit */ + LOONGSON_PCI_HIT0_SEL_L = 0xc000000cul; + LOONGSON_PCI_HIT0_SEL_H = 0xfffffffful; + LOONGSON_PCI_HIT1_SEL_L = 0x00000006ul; /* set this BAR as invalid */ + LOONGSON_PCI_HIT1_SEL_H = 0x00000000ul; + LOONGSON_PCI_HIT2_SEL_L = 0x00000006ul; /* set this BAR as invalid */ + LOONGSON_PCI_HIT2_SEL_H = 0x00000000ul; + + /* avoid deadlock of PCI reading/writing lock operation */ + LOONGSON_PCI_ISR4C = 0xd2000001ul; + + /* can not change gnt to break pci transfer when device's gnt not + deassert for some broken device */ + LOONGSON_PXARB_CFG = 0x00fe0105ul; + +#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG + /* + * set cpu addr window2 to map CPU address space to PCI address space + */ + LOONGSON_ADDRWIN_CPUTOPCI(ADDRWIN_WIN2, LOONGSON_CPU_MEM_SRC, + LOONGSON_PCI_MEM_DST, MMAP_CPUTOPCI_SIZE); +#endif +} + +extern int sbx00_acpi_init(void); + +static int __init pcibios_init(void) +{ + setup_pcimap(); + + loongson_pci_controller.io_map_base = mips_io_port_base; + register_pci_controller(&loongson_pci_controller); + + + return 0; +} + +arch_initcall(pcibios_init); diff --git a/arch/mips/loongson2ef/common/platform.c b/arch/mips/loongson2ef/common/platform.c new file mode 100644 index 000000000000..0084820cffaa --- /dev/null +++ b/arch/mips/loongson2ef/common/platform.c @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2009 Lemote Inc. + * Author: Wu Zhangjin, wuzhangjin@gmail.com + */ + +#include <linux/err.h> +#include <linux/smp.h> +#include <linux/platform_device.h> + +static struct platform_device loongson2_cpufreq_device = { + .name = "loongson2_cpufreq", + .id = -1, +}; + +static int __init loongson2_cpufreq_init(void) +{ + struct cpuinfo_mips *c = ¤t_cpu_data; + + /* Only 2F revision and it's successors support CPUFreq */ + if ((c->processor_id & PRID_REV_MASK) >= PRID_REV_LOONGSON2F) + return platform_device_register(&loongson2_cpufreq_device); + + return -ENODEV; +} + +arch_initcall(loongson2_cpufreq_init); diff --git a/arch/mips/loongson2ef/common/pm.c b/arch/mips/loongson2ef/common/pm.c new file mode 100644 index 000000000000..11f4cfd581fb --- /dev/null +++ b/arch/mips/loongson2ef/common/pm.c @@ -0,0 +1,158 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * loongson-specific suspend support + * + * Copyright (C) 2009 Lemote Inc. + * Author: Wu Zhangjin <wuzhangjin@gmail.com> + */ +#include <linux/suspend.h> +#include <linux/interrupt.h> +#include <linux/pm.h> + +#include <asm/i8259.h> +#include <asm/mipsregs.h> + +#include <loongson.h> + +static unsigned int __maybe_unused cached_master_mask; /* i8259A */ +static unsigned int __maybe_unused cached_slave_mask; +static unsigned int __maybe_unused cached_bonito_irq_mask; /* bonito */ + +void arch_suspend_disable_irqs(void) +{ + /* disable all mips events */ + local_irq_disable(); + +#ifdef CONFIG_I8259 + /* disable all events of i8259A */ + cached_slave_mask = inb(PIC_SLAVE_IMR); + cached_master_mask = inb(PIC_MASTER_IMR); + + outb(0xff, PIC_SLAVE_IMR); + inb(PIC_SLAVE_IMR); + outb(0xff, PIC_MASTER_IMR); + inb(PIC_MASTER_IMR); +#endif + /* disable all events of bonito */ + cached_bonito_irq_mask = LOONGSON_INTEN; + LOONGSON_INTENCLR = 0xffff; + (void)LOONGSON_INTENCLR; +} + +void arch_suspend_enable_irqs(void) +{ + /* enable all mips events */ + local_irq_enable(); +#ifdef CONFIG_I8259 + /* only enable the cached events of i8259A */ + outb(cached_slave_mask, PIC_SLAVE_IMR); + outb(cached_master_mask, PIC_MASTER_IMR); +#endif + /* enable all cached events of bonito */ + LOONGSON_INTENSET = cached_bonito_irq_mask; + (void)LOONGSON_INTENSET; +} + +/* + * Setup the board-specific events for waking up loongson from wait mode + */ +void __weak setup_wakeup_events(void) +{ +} + +/* + * Check wakeup events + */ +int __weak wakeup_loongson(void) +{ + return 1; +} + +/* + * If the events are really what we want to wakeup the CPU, wake it up + * otherwise put the CPU asleep again. + */ +static void wait_for_wakeup_events(void) +{ + while (!wakeup_loongson()) + writel(readl(LOONGSON_CHIPCFG) & ~0x7, LOONGSON_CHIPCFG); +} + +/* + * Stop all perf counters + * + * $24 is the control register of Loongson perf counter + */ +static inline void stop_perf_counters(void) +{ + __write_64bit_c0_register($24, 0, 0); +} + + +static void loongson_suspend_enter(void) +{ + static unsigned int cached_cpu_freq; + + /* setup wakeup events via enabling the IRQs */ + setup_wakeup_events(); + + stop_perf_counters(); + + cached_cpu_freq = readl(LOONGSON_CHIPCFG); + + /* Put CPU into wait mode */ + writel(readl(LOONGSON_CHIPCFG) & ~0x7, LOONGSON_CHIPCFG); + + /* wait for the given events to wakeup cpu from wait mode */ + wait_for_wakeup_events(); + + writel(cached_cpu_freq, LOONGSON_CHIPCFG); + + mmiowb(); +} + +void __weak mach_suspend(void) +{ +} + +void __weak mach_resume(void) +{ +} + +static int loongson_pm_enter(suspend_state_t state) +{ + mach_suspend(); + + /* processor specific suspend */ + loongson_suspend_enter(); + + mach_resume(); + + return 0; +} + +static int loongson_pm_valid_state(suspend_state_t state) +{ + switch (state) { + case PM_SUSPEND_ON: + case PM_SUSPEND_STANDBY: + case PM_SUSPEND_MEM: + return 1; + + default: + return 0; + } +} + +static const struct platform_suspend_ops loongson_pm_ops = { + .valid = loongson_pm_valid_state, + .enter = loongson_pm_enter, +}; + +static int __init loongson_pm_init(void) +{ + suspend_set_ops(&loongson_pm_ops); + + return 0; +} +arch_initcall(loongson_pm_init); diff --git a/arch/mips/loongson2ef/common/reset.c b/arch/mips/loongson2ef/common/reset.c new file mode 100644 index 000000000000..e7c87161ce00 --- /dev/null +++ b/arch/mips/loongson2ef/common/reset.c @@ -0,0 +1,73 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * + * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology + * Author: Fuxin Zhang, zhangfx@lemote.com + * Copyright (C) 2009 Lemote, Inc. + * Author: Zhangjin Wu, wuzhangjin@gmail.com + */ +#include <linux/init.h> +#include <linux/pm.h> + +#include <asm/idle.h> +#include <asm/reboot.h> + +#include <loongson.h> + +static inline void loongson_reboot(void) +{ +#ifndef CONFIG_CPU_JUMP_WORKAROUNDS + ((void (*)(void))ioremap_nocache(LOONGSON_BOOT_BASE, 4)) (); +#else + void (*func)(void); + + func = (void *)ioremap_nocache(LOONGSON_BOOT_BASE, 4); + + __asm__ __volatile__( + " .set noat \n" + " jr %[func] \n" + " .set at \n" + : /* No outputs */ + : [func] "r" (func)); +#endif +} + +static void loongson_restart(char *command) +{ + /* do preparation for reboot */ + mach_prepare_reboot(); + + /* reboot via jumping to boot base address */ + loongson_reboot(); +} + +static void loongson_poweroff(void) +{ + mach_prepare_shutdown(); + + /* + * It needs a wait loop here, but mips/kernel/reset.c already calls + * a generic delay loop, machine_hang(), so simply return. + */ + return; +} + +static void loongson_halt(void) +{ + pr_notice("\n\n** You can safely turn off the power now **\n\n"); + while (1) { + if (cpu_wait) + cpu_wait(); + } +} + +static int __init mips_reboot_setup(void) +{ + _machine_restart = loongson_restart; + _machine_halt = loongson_halt; + pm_power_off = loongson_poweroff; + + return 0; +} + +arch_initcall(mips_reboot_setup); diff --git a/arch/mips/loongson2ef/common/rtc.c b/arch/mips/loongson2ef/common/rtc.c new file mode 100644 index 000000000000..8d7628c0f513 --- /dev/null +++ b/arch/mips/loongson2ef/common/rtc.c @@ -0,0 +1,39 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Lemote Fuloong platform support + * + * Copyright(c) 2010 Arnaud Patard <apatard@mandriva.com> + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/mc146818rtc.h> + +static struct resource loongson_rtc_resources[] = { + { + .start = RTC_PORT(0), + .end = RTC_PORT(1), + .flags = IORESOURCE_IO, + }, { + .start = RTC_IRQ, + .end = RTC_IRQ, + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device loongson_rtc_device = { + .name = "rtc_cmos", + .id = -1, + .resource = loongson_rtc_resources, + .num_resources = ARRAY_SIZE(loongson_rtc_resources), +}; + + +static int __init loongson_rtc_platform_init(void) +{ + platform_device_register(&loongson_rtc_device); + return 0; +} + +device_initcall(loongson_rtc_platform_init); diff --git a/arch/mips/loongson2ef/common/serial.c b/arch/mips/loongson2ef/common/serial.c new file mode 100644 index 000000000000..ac4f6e3ebc3e --- /dev/null +++ b/arch/mips/loongson2ef/common/serial.c @@ -0,0 +1,86 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org) + * + * Copyright (C) 2009 Lemote, Inc. + * Author: Yan hua (yanhua@lemote.com) + * Author: Wu Zhangjin (wuzhangjin@gmail.com) + */ + +#include <linux/io.h> +#include <linux/module.h> +#include <linux/serial_8250.h> + +#include <asm/bootinfo.h> + +#include <loongson.h> +#include <machine.h> + +#define PORT(int, clk) \ +{ \ + .irq = int, \ + .uartclk = clk, \ + .iotype = UPIO_PORT, \ + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \ + .regshift = 0, \ +} + +#define PORT_M(int, clk) \ +{ \ + .irq = MIPS_CPU_IRQ_BASE + (int), \ + .uartclk = clk, \ + .iotype = UPIO_MEM, \ + .membase = (void __iomem *)NULL, \ + .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \ + .regshift = 0, \ +} + +static struct plat_serial8250_port uart8250_data[MACH_LOONGSON_END + 1] = { + [MACH_LOONGSON_UNKNOWN] = {}, + [MACH_LEMOTE_FL2E] = PORT(4, 1843200), + [MACH_LEMOTE_FL2F] = PORT(3, 1843200), + [MACH_LEMOTE_ML2F7] = PORT_M(3, 3686400), + [MACH_LEMOTE_YL2F89] = PORT_M(3, 3686400), + [MACH_DEXXON_GDIUM2F10] = PORT_M(3, 3686400), + [MACH_LEMOTE_NAS] = PORT_M(3, 3686400), + [MACH_LEMOTE_LL2F] = PORT(3, 1843200), + [MACH_LOONGSON_END] = {}, +}; + +static struct platform_device uart8250_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, +}; + +static int __init serial_init(void) +{ + unsigned char iotype; + + iotype = uart8250_data[mips_machtype].iotype; + + if (UPIO_MEM == iotype) { + uart8250_data[mips_machtype].mapbase = + loongson_uart_base; + uart8250_data[mips_machtype].membase = + (void __iomem *)_loongson_uart_base; + } + else if (UPIO_PORT == iotype) + uart8250_data[mips_machtype].iobase = + loongson_uart_base - LOONGSON_PCIIO_BASE; + + memset(&uart8250_data[mips_machtype + 1], 0, + sizeof(struct plat_serial8250_port)); + uart8250_device.dev.platform_data = &uart8250_data[mips_machtype]; + + return platform_device_register(&uart8250_device); +} +module_init(serial_init); + +static void __exit serial_exit(void) +{ + platform_device_unregister(&uart8250_device); +} +module_exit(serial_exit); diff --git a/arch/mips/loongson2ef/common/setup.c b/arch/mips/loongson2ef/common/setup.c new file mode 100644 index 000000000000..4fd27f4f90ed --- /dev/null +++ b/arch/mips/loongson2ef/common/setup.c @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2007 Lemote Inc. & Institute of Computing Technology + * Author: Fuxin Zhang, zhangfx@lemote.com + */ +#include <linux/export.h> +#include <linux/init.h> + +#include <asm/wbflush.h> +#include <asm/bootinfo.h> + +#include <loongson.h> + +static void wbflush_loongson(void) +{ + asm(".set\tpush\n\t" + ".set\tnoreorder\n\t" + ".set mips3\n\t" + "sync\n\t" + "nop\n\t" + ".set\tpop\n\t" + ".set mips0\n\t"); +} + +void (*__wbflush)(void) = wbflush_loongson; +EXPORT_SYMBOL(__wbflush); + +void __init plat_mem_setup(void) +{ +} diff --git a/arch/mips/loongson2ef/common/time.c b/arch/mips/loongson2ef/common/time.c new file mode 100644 index 000000000000..585741af42a9 --- /dev/null +++ b/arch/mips/loongson2ef/common/time.c @@ -0,0 +1,28 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology + * Author: Fuxin Zhang, zhangfx@lemote.com + * + * Copyright (C) 2009 Lemote Inc. + * Author: Wu Zhangjin, wuzhangjin@gmail.com + */ +#include <asm/mc146818-time.h> +#include <asm/time.h> +#include <asm/hpet.h> + +#include <loongson.h> +#include <cs5536/cs5536_mfgpt.h> + +void __init plat_time_init(void) +{ + /* setup mips r4k timer */ + mips_hpt_frequency = cpu_clock_freq / 2; + + setup_mfgpt0_timer(); +} + +void read_persistent_clock64(struct timespec64 *ts) +{ + ts->tv_sec = mc146818_get_cmos_time(); + ts->tv_nsec = 0; +} diff --git a/arch/mips/loongson2ef/common/uart_base.c b/arch/mips/loongson2ef/common/uart_base.c new file mode 100644 index 000000000000..522bea6ad7b0 --- /dev/null +++ b/arch/mips/loongson2ef/common/uart_base.c @@ -0,0 +1,43 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2009 Lemote Inc. + * Author: Wu Zhangjin, wuzhangjin@gmail.com + */ + +#include <linux/export.h> +#include <asm/bootinfo.h> +#include <asm/setup.h> + +#include <loongson.h> + +/* raw */ +unsigned long loongson_uart_base; +/* ioremapped */ +unsigned long _loongson_uart_base; + +EXPORT_SYMBOL(loongson_uart_base); +EXPORT_SYMBOL(_loongson_uart_base); + +void prom_init_loongson_uart_base(void) +{ + switch (mips_machtype) { + case MACH_LEMOTE_FL2E: + loongson_uart_base = LOONGSON_PCIIO_BASE + 0x3f8; + break; + case MACH_LEMOTE_FL2F: + case MACH_LEMOTE_LL2F: + loongson_uart_base = LOONGSON_PCIIO_BASE + 0x2f8; + break; + case MACH_LEMOTE_ML2F7: + case MACH_LEMOTE_YL2F89: + case MACH_DEXXON_GDIUM2F10: + case MACH_LEMOTE_NAS: + default: + /* The CPU provided serial port (LPC) */ + loongson_uart_base = LOONGSON_LIO1_BASE + 0x3f8; + break; + } + + _loongson_uart_base = TO_UNCAC(loongson_uart_base); + setup_8250_early_printk_port(_loongson_uart_base, 0, 1024); +} |