1 files changed, 0 insertions, 250 deletions
diff --git a/arch/mips/netlogic/xlr/platform.c b/arch/mips/netlogic/xlr/platform.c
deleted file mode 100644
index 4785932af248..000000000000
--- a/arch/mips/netlogic/xlr/platform.c
+++ /dev/null
@@ -1,250 +0,0 @@
-/*
- * Copyright 2011, Netlogic Microsystems.
- * Copyright 2004, Matt Porter <mporter@kernel.crashing.org>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/resource.h>
-#include <linux/serial_8250.h>
-#include <linux/serial_reg.h>
-#include <linux/i2c.h>
-#include <linux/usb/ehci_pdriver.h>
-#include <linux/usb/ohci_pdriver.h>
-
-#include <asm/netlogic/haldefs.h>
-#include <asm/netlogic/xlr/iomap.h>
-#include <asm/netlogic/xlr/pic.h>
-#include <asm/netlogic/xlr/xlr.h>
-
-static unsigned int nlm_xlr_uart_in(struct uart_port *p, int offset)
-{
-	uint64_t uartbase;
-	unsigned int value;
-
-	/* sign extend to 64 bits, if needed */
-	uartbase = (uint64_t)(long)p->membase;
-	value = nlm_read_reg(uartbase, offset);
-
-	/* See XLR/XLS errata */
-	if (offset == UART_MSR)
-		value ^= 0xF0;
-	else if (offset == UART_MCR)
-		value ^= 0x3;
-
-	return value;
-}
-
-static void nlm_xlr_uart_out(struct uart_port *p, int offset, int value)
-{
-	uint64_t uartbase;
-
-	/* sign extend to 64 bits, if needed */
-	uartbase = (uint64_t)(long)p->membase;
-
-	/* See XLR/XLS errata */
-	if (offset == UART_MSR)
-		value ^= 0xF0;
-	else if (offset == UART_MCR)
-		value ^= 0x3;
-
-	nlm_write_reg(uartbase, offset, value);
-}
-
-#define PORT(_irq)					\
-	{						\
-		.irq		= _irq,			\
-		.regshift	= 2,			\
-		.iotype		= UPIO_MEM32,		\
-		.flags		= (UPF_SKIP_TEST |	\
-			 UPF_FIXED_TYPE | UPF_BOOT_AUTOCONF),\
-		.uartclk	= PIC_CLK_HZ,		\
-		.type		= PORT_16550A,		\
-		.serial_in	= nlm_xlr_uart_in,	\
-		.serial_out	= nlm_xlr_uart_out,	\
-	}
-
-static struct plat_serial8250_port xlr_uart_data[] = {
-	PORT(PIC_UART_0_IRQ),
-	PORT(PIC_UART_1_IRQ),
-	{},
-};
-
-static struct platform_device uart_device = {
-	.name		= "serial8250",
-	.id		= PLAT8250_DEV_PLATFORM,
-	.dev = {
-		.platform_data = xlr_uart_data,
-	},
-};
-
-static int __init nlm_uart_init(void)
-{
-	unsigned long uartbase;
-
-	uartbase = (unsigned long)nlm_mmio_base(NETLOGIC_IO_UART_0_OFFSET);
-	xlr_uart_data[0].membase = (void __iomem *)uartbase;
-	xlr_uart_data[0].mapbase = CPHYSADDR(uartbase);
-
-	uartbase = (unsigned long)nlm_mmio_base(NETLOGIC_IO_UART_1_OFFSET);
-	xlr_uart_data[1].membase = (void __iomem *)uartbase;
-	xlr_uart_data[1].mapbase = CPHYSADDR(uartbase);
-
-	return platform_device_register(&uart_device);
-}
-
-arch_initcall(nlm_uart_init);
-
-#ifdef CONFIG_USB
-/* Platform USB devices, only on XLS chips */
-static u64 xls_usb_dmamask = ~(u32)0;
-#define USB_PLATFORM_DEV(n, i, irq)					\
-	{								\
-		.name		= n,					\
-		.id		= i,					\
-		.num_resources	= 2,					\
-		.dev		= {					\
-			.dma_mask	= &xls_usb_dmamask,		\
-			.coherent_dma_mask = 0xffffffff,		\
-		},							\
-		.resource	= (struct resource[]) {			\
-			{						\
-				.flags = IORESOURCE_MEM,		\
-			},						\
-			{						\
-				.start	= irq,				\
-				.end	= irq,				\
-				.flags = IORESOURCE_IRQ,		\
-			},						\
-		},							\
-	}
-
-static struct usb_ehci_pdata xls_usb_ehci_pdata = {
-	.caps_offset	= 0,
-};
-
-static struct usb_ohci_pdata xls_usb_ohci_pdata;
-
-static struct platform_device xls_usb_ehci_device =
-			 USB_PLATFORM_DEV("ehci-platform", 0, PIC_USB_IRQ);
-static struct platform_device xls_usb_ohci_device_0 =
-			 USB_PLATFORM_DEV("ohci-platform", 1, PIC_USB_IRQ);
-static struct platform_device xls_usb_ohci_device_1 =
-			 USB_PLATFORM_DEV("ohci-platform", 2, PIC_USB_IRQ);
-
-static struct platform_device *xls_platform_devices[] = {
-	&xls_usb_ehci_device,
-	&xls_usb_ohci_device_0,
-	&xls_usb_ohci_device_1,
-};
-
-int xls_platform_usb_init(void)
-{
-	uint64_t usb_mmio, gpio_mmio;
-	unsigned long memres;
-	uint32_t val;
-
-	if (!nlm_chip_is_xls())
-		return 0;
-
-	gpio_mmio = nlm_mmio_base(NETLOGIC_IO_GPIO_OFFSET);
-	usb_mmio  = nlm_mmio_base(NETLOGIC_IO_USB_1_OFFSET);
-
-	/* Clear Rogue Phy INTs */
-	nlm_write_reg(usb_mmio, 49, 0x10000000);
-	/* Enable all interrupts */
-	nlm_write_reg(usb_mmio, 50, 0x1f000000);
-
-	/* Enable ports */
-	nlm_write_reg(usb_mmio,	 1, 0x07000500);
-
-	val = nlm_read_reg(gpio_mmio, 21);
-	if (((val >> 22) & 0x01) == 0) {
-		pr_info("Detected USB Device mode - Not supported!\n");
-		nlm_write_reg(usb_mmio,	 0, 0x01000000);
-		return 0;
-	}
-
-	pr_info("Detected USB Host mode - Adding XLS USB devices.\n");
-	/* Clear reset, host mode */
-	nlm_write_reg(usb_mmio,	 0, 0x02000000);
-
-	/* Memory resource for various XLS usb ports */
-	usb_mmio = nlm_mmio_base(NETLOGIC_IO_USB_0_OFFSET);
-	memres = CPHYSADDR((unsigned long)usb_mmio);
-	xls_usb_ehci_device.resource[0].start = memres;
-	xls_usb_ehci_device.resource[0].end = memres + 0x400 - 1;
-	xls_usb_ehci_device.dev.platform_data = &xls_usb_ehci_pdata;
-
-	memres += 0x400;
-	xls_usb_ohci_device_0.resource[0].start = memres;
-	xls_usb_ohci_device_0.resource[0].end = memres + 0x400 - 1;
-	xls_usb_ohci_device_0.dev.platform_data = &xls_usb_ohci_pdata;
-
-	memres += 0x400;
-	xls_usb_ohci_device_1.resource[0].start = memres;
-	xls_usb_ohci_device_1.resource[0].end = memres + 0x400 - 1;
-	xls_usb_ohci_device_1.dev.platform_data = &xls_usb_ohci_pdata;
-
-	return platform_add_devices(xls_platform_devices,
-				ARRAY_SIZE(xls_platform_devices));
-}
-
-arch_initcall(xls_platform_usb_init);
-#endif
-
-#ifdef CONFIG_I2C
-static struct i2c_board_info nlm_i2c_board_info1[] __initdata = {
-	/* All XLR boards have this RTC and Max6657 Temp Chip */
-	[0] = {
-		.type	= "ds1374",
-		.addr	= 0x68
-	},
-	[1] = {
-		.type	= "lm90",
-		.addr	= 0x4c
-	},
-};
-
-static struct resource i2c_resources[] = {
-	[0] = {
-		.start	= 0,	/* filled at init */
-		.end	= 0,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device nlm_xlr_i2c_1 = {
-	.name		= "xlr-i2cbus",
-	.id		= 1,
-	.num_resources	= 1,
-	.resource	= i2c_resources,
-};
-
-static int __init nlm_i2c_init(void)
-{
-	int err = 0;
-	unsigned int offset;
-
-	/* I2C bus 0 does not have any useful devices, configure only bus 1 */
-	offset = NETLOGIC_IO_I2C_1_OFFSET;
-	nlm_xlr_i2c_1.resource[0].start = CPHYSADDR(nlm_mmio_base(offset));
-	nlm_xlr_i2c_1.resource[0].end = nlm_xlr_i2c_1.resource[0].start + 0xfff;
-
-	platform_device_register(&nlm_xlr_i2c_1);
-
-	err = i2c_register_board_info(1, nlm_i2c_board_info1,
-				ARRAY_SIZE(nlm_i2c_board_info1));
-	if (err < 0)
-		pr_err("nlm-i2c: cannot register board I2C devices\n");
-	return err;
-}
-
-arch_initcall(nlm_i2c_init);
-#endif