summaryrefslogtreecommitdiff
path: root/arch/mips/pci/pci-octeon.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/pci/pci-octeon.c')
-rw-r--r--arch/mips/pci/pci-octeon.c30
1 files changed, 15 insertions, 15 deletions
diff --git a/arch/mips/pci/pci-octeon.c b/arch/mips/pci/pci-octeon.c
index 5b5ed76c6f47..95c2ea815cac 100644
--- a/arch/mips/pci/pci-octeon.c
+++ b/arch/mips/pci/pci-octeon.c
@@ -30,8 +30,8 @@
* addresses. Use PCI endian swapping 1 so no address swapping is
* necessary. The Linux io routines will endian swap the data.
*/
-#define OCTEON_PCI_IOSPACE_BASE 0x80011a0400000000ull
-#define OCTEON_PCI_IOSPACE_SIZE (1ull<<32)
+#define OCTEON_PCI_IOSPACE_BASE 0x80011a0400000000ull
+#define OCTEON_PCI_IOSPACE_SIZE (1ull<<32)
/* Octeon't PCI controller uses did=3, subdid=3 for PCI memory. */
#define OCTEON_PCI_MEMSPACE_OFFSET (0x00011b0000000000ull)
@@ -68,10 +68,10 @@ enum octeon_dma_bar_type octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_INVALID;
*
* @dev: The Linux PCI device structure for the device to map
* @slot: The slot number for this device on __BUS 0__. Linux
- * enumerates through all the bridges and figures out the
- * slot on Bus 0 where this device eventually hooks to.
+ * enumerates through all the bridges and figures out the
+ * slot on Bus 0 where this device eventually hooks to.
* @pin: The PCI interrupt pin read from the device, then swizzled
- * as it goes through each bridge.
+ * as it goes through each bridge.
* Returns Interrupt number for the device
*/
int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
@@ -120,8 +120,8 @@ int pcibios_plat_dev_init(struct pci_dev *dev)
/* Enable the PCIe normal error reporting */
config = PCI_EXP_DEVCTL_CERE; /* Correctable Error Reporting */
config |= PCI_EXP_DEVCTL_NFERE; /* Non-Fatal Error Reporting */
- config |= PCI_EXP_DEVCTL_FERE; /* Fatal Error Reporting */
- config |= PCI_EXP_DEVCTL_URRE; /* Unsupported Request */
+ config |= PCI_EXP_DEVCTL_FERE; /* Fatal Error Reporting */
+ config |= PCI_EXP_DEVCTL_URRE; /* Unsupported Request */
pcie_capability_set_word(dev, PCI_EXP_DEVCTL, config);
/* Find the Advanced Error Reporting capability */
@@ -226,10 +226,10 @@ const char *octeon_get_pci_interrupts(void)
*
* @dev: The Linux PCI device structure for the device to map
* @slot: The slot number for this device on __BUS 0__. Linux
- * enumerates through all the bridges and figures out the
- * slot on Bus 0 where this device eventually hooks to.
+ * enumerates through all the bridges and figures out the
+ * slot on Bus 0 where this device eventually hooks to.
* @pin: The PCI interrupt pin read from the device, then swizzled
- * as it goes through each bridge.
+ * as it goes through each bridge.
* Returns Interrupt number for the device
*/
int __init octeon_pci_pcibios_map_irq(const struct pci_dev *dev,
@@ -404,8 +404,8 @@ static void octeon_pci_initialize(void)
ctl_status_2.s.bb1_siz = 1; /* BAR1 is 2GB */
ctl_status_2.s.bb_ca = 1; /* Don't use L2 with big bars */
ctl_status_2.s.bb_es = 1; /* Big bar in byte swap mode */
- ctl_status_2.s.bb1 = 1; /* BAR1 is big */
- ctl_status_2.s.bb0 = 1; /* BAR0 is big */
+ ctl_status_2.s.bb1 = 1; /* BAR1 is big */
+ ctl_status_2.s.bb0 = 1; /* BAR0 is big */
}
octeon_npi_write32(CVMX_NPI_PCI_CTL_STATUS_2, ctl_status_2.u32);
@@ -446,7 +446,7 @@ static void octeon_pci_initialize(void)
* count. [1..31] and 0=32. NOTE: If the user
* programs these bits beyond the Designed Maximum
* outstanding count, then the designed maximum table
- * depth will be used instead. No additional
+ * depth will be used instead. No additional
* Deferred/Split transactions will be accepted if
* this outstanding maximum count is
* reached. Furthermore, no additional deferred/split
@@ -456,7 +456,7 @@ static void octeon_pci_initialize(void)
cfg19.s.tdomc = 4;
/*
* Master Deferred Read Request Outstanding Max Count
- * (PCI only). CR4C[26:24] Max SAC cycles MAX DAC
+ * (PCI only). CR4C[26:24] Max SAC cycles MAX DAC
* cycles 000 8 4 001 1 0 010 2 1 011 3 1 100 4 2 101
* 5 2 110 6 3 111 7 3 For example, if these bits are
* programmed to 100, the core can support 2 DAC
@@ -550,7 +550,7 @@ static void octeon_pci_initialize(void)
/*
* Affects PCI performance when OCTEON services reads to its
- * BAR1/BAR2. Refer to Section 10.6.1. The recommended values are
+ * BAR1/BAR2. Refer to Section 10.6.1. The recommended values are
* 0x22, 0x33, and 0x33 for PCI_READ_CMD_6, PCI_READ_CMD_C, and
* PCI_READ_CMD_E, respectively. Unfortunately due to errata DDR-700,
* these values need to be changed so they won't possibly prefetch off