summaryrefslogtreecommitdiff
path: root/arch/mips/pnx8550/common/setup.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/pnx8550/common/setup.c')
-rw-r--r--arch/mips/pnx8550/common/setup.c142
1 files changed, 0 insertions, 142 deletions
diff --git a/arch/mips/pnx8550/common/setup.c b/arch/mips/pnx8550/common/setup.c
deleted file mode 100644
index fccd6b0c6d3f..000000000000
--- a/arch/mips/pnx8550/common/setup.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- *
- * 2.6 port, Embedded Alley Solutions, Inc
- *
- * Based on Per Hallsmark, per.hallsmark@mvista.com
- *
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- */
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/irq.h>
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/serial_pnx8xxx.h>
-#include <linux/pm.h>
-
-#include <asm/cpu.h>
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/mipsregs.h>
-#include <asm/reboot.h>
-#include <asm/pgtable.h>
-#include <asm/time.h>
-
-#include <glb.h>
-#include <int.h>
-#include <pci.h>
-#include <uart.h>
-#include <nand.h>
-
-extern void __init board_setup(void);
-extern void pnx8550_machine_restart(char *);
-extern void pnx8550_machine_halt(void);
-extern struct resource ioport_resource;
-extern struct resource iomem_resource;
-extern char *prom_getcmdline(void);
-
-struct resource standard_io_resources[] = {
- {
- .start = 0x00,
- .end = 0x1f,
- .name = "dma1",
- .flags = IORESOURCE_BUSY
- }, {
- .start = 0x40,
- .end = 0x5f,
- .name = "timer",
- .flags = IORESOURCE_BUSY
- }, {
- .start = 0x80,
- .end = 0x8f,
- .name = "dma page reg",
- .flags = IORESOURCE_BUSY
- }, {
- .start = 0xc0,
- .end = 0xdf,
- .name = "dma2",
- .flags = IORESOURCE_BUSY
- },
-};
-
-#define STANDARD_IO_RESOURCES ARRAY_SIZE(standard_io_resources)
-
-extern struct resource pci_io_resource;
-extern struct resource pci_mem_resource;
-
-/* Return the total size of DRAM-memory, (RANK0 + RANK1) */
-unsigned long get_system_mem_size(void)
-{
- /* Read IP2031_RANK0_ADDR_LO */
- unsigned long dram_r0_lo = inl(PCI_BASE | 0x65010);
- /* Read IP2031_RANK1_ADDR_HI */
- unsigned long dram_r1_hi = inl(PCI_BASE | 0x65018);
-
- return dram_r1_hi - dram_r0_lo + 1;
-}
-
-int pnx8550_console_port = -1;
-
-void __init plat_mem_setup(void)
-{
- int i;
- char* argptr;
-
- board_setup(); /* board specific setup */
-
- _machine_restart = pnx8550_machine_restart;
- _machine_halt = pnx8550_machine_halt;
- pm_power_off = pnx8550_machine_halt;
-
- /* Clear the Global 2 Register, PCI Inta Output Enable Registers
- Bit 1:Enable DAC Powerdown
- -> 0:DACs are enabled and are working normally
- 1:DACs are powerdown
- Bit 0:Enable of PCI inta output
- -> 0 = Disable PCI inta output
- 1 = Enable PCI inta output
- */
- PNX8550_GLB2_ENAB_INTA_O = 0;
-
- /* IO/MEM resources. */
- set_io_port_base(PNX8550_PORT_BASE);
- ioport_resource.start = 0;
- ioport_resource.end = ~0;
- iomem_resource.start = 0;
- iomem_resource.end = ~0;
-
- /* Request I/O space for devices on this board */
- for (i = 0; i < STANDARD_IO_RESOURCES; i++)
- request_resource(&ioport_resource, standard_io_resources + i);
-
- /* Place the Mode Control bit for GPIO pin 16 in primary function */
- /* Pin 16 is used by UART1, UA1_TX */
- outl((PNX8550_GPIO_MODE_PRIMOP << PNX8550_GPIO_MC_16_BIT) |
- (PNX8550_GPIO_MODE_PRIMOP << PNX8550_GPIO_MC_17_BIT),
- PNX8550_GPIO_MC1);
-
- argptr = prom_getcmdline();
- if ((argptr = strstr(argptr, "console=ttyS")) != NULL) {
- argptr += strlen("console=ttyS");
- pnx8550_console_port = *argptr == '0' ? 0 : 1;
-
- /* We must initialize the UART (console) before early printk */
- /* Set LCR to 8-bit and BAUD to 38400 (no 5) */
- ip3106_lcr(UART_BASE, pnx8550_console_port) =
- PNX8XXX_UART_LCR_8BIT;
- ip3106_baud(UART_BASE, pnx8550_console_port) = 5;
- }
-}