summaryrefslogtreecommitdiff
path: root/arch/mips/sgi-ip22/ip22-mc.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/sgi-ip22/ip22-mc.c')
-rw-r--r--arch/mips/sgi-ip22/ip22-mc.c44
1 files changed, 22 insertions, 22 deletions
diff --git a/arch/mips/sgi-ip22/ip22-mc.c b/arch/mips/sgi-ip22/ip22-mc.c
index 75ada8a9713b..7cec0a4e527d 100644
--- a/arch/mips/sgi-ip22/ip22-mc.c
+++ b/arch/mips/sgi-ip22/ip22-mc.c
@@ -121,22 +121,22 @@ void __init sgimc_init(void)
*/
/* Step 0: Make sure we turn off the watchdog in case it's
- * still running (which might be the case after a
- * soft reboot).
+ * still running (which might be the case after a
+ * soft reboot).
*/
tmp = sgimc->cpuctrl0;
tmp &= ~SGIMC_CCTRL0_WDOG;
sgimc->cpuctrl0 = tmp;
/* Step 1: The CPU/GIO error status registers will not latch
- * up a new error status until the register has been
- * cleared by the cpu. These status registers are
- * cleared by writing any value to them.
+ * up a new error status until the register has been
+ * cleared by the cpu. These status registers are
+ * cleared by writing any value to them.
*/
sgimc->cstat = sgimc->gstat = 0;
/* Step 2: Enable all parity checking in cpu control register
- * zero.
+ * zero.
*/
/* don't touch parity settings for IP28 */
tmp = sgimc->cpuctrl0;
@@ -147,7 +147,7 @@ void __init sgimc_init(void)
sgimc->cpuctrl0 = tmp;
/* Step 3: Setup the MC write buffer depth, this is controlled
- * in cpu control register 1 in the lower 4 bits.
+ * in cpu control register 1 in the lower 4 bits.
*/
tmp = sgimc->cpuctrl1;
tmp &= ~0xf;
@@ -155,26 +155,26 @@ void __init sgimc_init(void)
sgimc->cpuctrl1 = tmp;
/* Step 4: Initialize the RPSS divider register to run as fast
- * as it can correctly operate. The register is laid
- * out as follows:
+ * as it can correctly operate. The register is laid
+ * out as follows:
*
- * ----------------------------------------
- * | RESERVED | INCREMENT | DIVIDER |
- * ----------------------------------------
- * 31 16 15 8 7 0
+ * ----------------------------------------
+ * | RESERVED | INCREMENT | DIVIDER |
+ * ----------------------------------------
+ * 31 16 15 8 7 0
*
- * DIVIDER determines how often a 'tick' happens,
- * INCREMENT determines by how the RPSS increment
- * registers value increases at each 'tick'. Thus,
- * for IP22 we get INCREMENT=1, DIVIDER=1 == 0x101
+ * DIVIDER determines how often a 'tick' happens,
+ * INCREMENT determines by how the RPSS increment
+ * registers value increases at each 'tick'. Thus,
+ * for IP22 we get INCREMENT=1, DIVIDER=1 == 0x101
*/
sgimc->divider = 0x101;
/* Step 5: Initialize GIO64 arbitrator configuration register.
*
* NOTE: HPC init code in sgihpc_init() must run before us because
- * we need to know Guiness vs. FullHouse and the board
- * revision on this machine. You have been warned.
+ * we need to know Guiness vs. FullHouse and the board
+ * revision on this machine. You have been warned.
*/
/* First the basic invariants across all GIO64 implementations. */
@@ -187,18 +187,18 @@ void __init sgimc_init(void)
if (SGIOC_SYSID_BOARDREV(sgioc->sysid) < 2) {
tmp |= SGIMC_GIOPAR_HPC264; /* 2nd HPC at 64bits */
tmp |= SGIMC_GIOPAR_PLINEEXP0; /* exp0 pipelines */
- tmp |= SGIMC_GIOPAR_MASTEREXP1; /* exp1 masters */
+ tmp |= SGIMC_GIOPAR_MASTEREXP1; /* exp1 masters */
tmp |= SGIMC_GIOPAR_RTIMEEXP0; /* exp0 is realtime */
} else {
tmp |= SGIMC_GIOPAR_HPC264; /* 2nd HPC 64bits */
tmp |= SGIMC_GIOPAR_PLINEEXP0; /* exp[01] pipelined */
tmp |= SGIMC_GIOPAR_PLINEEXP1;
- tmp |= SGIMC_GIOPAR_MASTEREISA; /* EISA masters */
+ tmp |= SGIMC_GIOPAR_MASTEREISA; /* EISA masters */
}
} else {
/* Guiness specific settings. */
tmp |= SGIMC_GIOPAR_EISA64; /* MC talks to EISA at 64bits */
- tmp |= SGIMC_GIOPAR_MASTEREISA; /* EISA bus can act as master */
+ tmp |= SGIMC_GIOPAR_MASTEREISA; /* EISA bus can act as master */
}
sgimc->giopar = tmp; /* poof */