diff options
Diffstat (limited to 'arch/powerpc/boot/dts')
40 files changed, 134 insertions, 2136 deletions
diff --git a/arch/powerpc/boot/dts/Makefile b/arch/powerpc/boot/dts/Makefile index fb335d05aae8..0cd0d8558b47 100644 --- a/arch/powerpc/boot/dts/Makefile +++ b/arch/powerpc/boot/dts/Makefile @@ -2,5 +2,4 @@ subdir-y += fsl -dtstree := $(srctree)/$(src) -dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts)) +dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(src)/%.dts,%.dtb, $(wildcard $(src)/*.dts)) diff --git a/arch/powerpc/boot/dts/acadia.dts b/arch/powerpc/boot/dts/acadia.dts deleted file mode 100644 index deb52e41ab84..000000000000 --- a/arch/powerpc/boot/dts/acadia.dts +++ /dev/null @@ -1,224 +0,0 @@ -/* - * Device Tree Source for AMCC Acadia (405EZ) - * - * Copyright IBM Corp. 2008 - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -/dts-v1/; - -/ { - #address-cells = <1>; - #size-cells = <1>; - model = "amcc,acadia"; - compatible = "amcc,acadia"; - dcr-parent = <&{/cpus/cpu@0}>; - - aliases { - ethernet0 = &EMAC0; - serial0 = &UART0; - serial1 = &UART1; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - model = "PowerPC,405EZ"; - reg = <0x0>; - clock-frequency = <0>; /* Filled in by wrapper */ - timebase-frequency = <0>; /* Filled in by wrapper */ - i-cache-line-size = <32>; - d-cache-line-size = <32>; - i-cache-size = <16384>; - d-cache-size = <16384>; - dcr-controller; - dcr-access-method = "native"; - }; - }; - - memory { - device_type = "memory"; - reg = <0x0 0x0>; /* Filled in by wrapper */ - }; - - UIC0: interrupt-controller { - compatible = "ibm,uic-405ez", "ibm,uic"; - interrupt-controller; - dcr-reg = <0x0c0 0x009>; - cell-index = <0>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - }; - - plb { - compatible = "ibm,plb-405ez", "ibm,plb3"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - clock-frequency = <0>; /* Filled in by wrapper */ - - MAL0: mcmal { - compatible = "ibm,mcmal-405ez", "ibm,mcmal"; - dcr-reg = <0x380 0x62>; - num-tx-chans = <1>; - num-rx-chans = <1>; - interrupt-parent = <&UIC0>; - /* 405EZ has only 3 interrupts to the UIC, as - * SERR, TXDE, and RXDE are or'd together into - * one UIC bit - */ - interrupts = < - 0x13 0x4 /* TXEOB */ - 0x15 0x4 /* RXEOB */ - 0x12 0x4 /* SERR, TXDE, RXDE */>; - }; - - POB0: opb { - compatible = "ibm,opb-405ez", "ibm,opb"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - dcr-reg = <0x0a 0x05>; - clock-frequency = <0>; /* Filled in by wrapper */ - - UART0: serial@ef600300 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0xef600300 0x8>; - virtual-reg = <0xef600300>; - clock-frequency = <0>; /* Filled in by wrapper */ - current-speed = <115200>; - interrupt-parent = <&UIC0>; - interrupts = <0x5 0x4>; - }; - - UART1: serial@ef600400 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0xef600400 0x8>; - clock-frequency = <0>; /* Filled in by wrapper */ - current-speed = <115200>; - interrupt-parent = <&UIC0>; - interrupts = <0x6 0x4>; - }; - - IIC: i2c@ef600500 { - compatible = "ibm,iic-405ez", "ibm,iic"; - reg = <0xef600500 0x11>; - interrupt-parent = <&UIC0>; - interrupts = <0xa 0x4>; - }; - - GPIO0: gpio@ef600700 { - compatible = "ibm,gpio-405ez"; - reg = <0xef600700 0x20>; - }; - - GPIO1: gpio@ef600800 { - compatible = "ibm,gpio-405ez"; - reg = <0xef600800 0x20>; - }; - - EMAC0: ethernet@ef600900 { - device_type = "network"; - compatible = "ibm,emac-405ez", "ibm,emac"; - interrupt-parent = <&UIC0>; - interrupts = < - 0x10 0x4 /* Ethernet */ - 0x11 0x4 /* Ethernet Wake up */>; - local-mac-address = [000000000000]; /* Filled in by wrapper */ - reg = <0xef600900 0x70>; - mal-device = <&MAL0>; - mal-tx-channel = <0>; - mal-rx-channel = <0>; - cell-index = <0>; - max-frame-size = <1500>; - rx-fifo-size = <4096>; - tx-fifo-size = <2048>; - phy-mode = "mii"; - phy-map = <0x0>; - }; - - CAN0: can@ef601000 { - compatible = "amcc,can-405ez"; - reg = <0xef601000 0x620>; - interrupt-parent = <&UIC0>; - interrupts = <0x7 0x4>; - }; - - CAN1: can@ef601800 { - compatible = "amcc,can-405ez"; - reg = <0xef601800 0x620>; - interrupt-parent = <&UIC0>; - interrupts = <0x8 0x4>; - }; - - cameleon@ef602000 { - compatible = "amcc,cameleon-405ez"; - reg = <0xef602000 0x800>; - interrupt-parent = <&UIC0>; - interrupts = <0xb 0x4 0xc 0x4>; - }; - - ieee1588@ef602800 { - compatible = "amcc,ieee1588-405ez"; - reg = <0xef602800 0x60>; - interrupt-parent = <&UIC0>; - interrupts = <0x4 0x4>; - /* This thing is a bit weird. It has it's own UIC - * that it uses to generate snapshot triggers. We - * don't really support this device yet, and it needs - * work to figure this out. - */ - dcr-reg = <0xe0 0x9>; - }; - - usb@ef603000 { - compatible = "ohci-be"; - reg = <0xef603000 0x80>; - interrupt-parent = <&UIC0>; - interrupts = <0xd 0x4 0xe 0x4>; - }; - - dac@ef603300 { - compatible = "amcc,dac-405ez"; - reg = <0xef603300 0x40>; - interrupt-parent = <&UIC0>; - interrupts = <0x18 0x4>; - }; - - adc@ef603400 { - compatible = "amcc,adc-405ez"; - reg = <0xef603400 0x40>; - interrupt-parent = <&UIC0>; - interrupts = <0x17 0x4>; - }; - - spi@ef603500 { - compatible = "amcc,spi-405ez"; - reg = <0xef603500 0x100>; - interrupt-parent = <&UIC0>; - interrupts = <0x9 0x4>; - }; - }; - - EBC0: ebc { - compatible = "ibm,ebc-405ez", "ibm,ebc"; - dcr-reg = <0x12 0x2>; - #address-cells = <2>; - #size-cells = <1>; - clock-frequency = <0>; /* Filled in by wrapper */ - }; - }; - - chosen { - stdout-path = "/plb/opb/serial@ef600300"; - }; -}; diff --git a/arch/powerpc/boot/dts/akebono.dts b/arch/powerpc/boot/dts/akebono.dts index df18f8dc4642..343326c30380 100644 --- a/arch/powerpc/boot/dts/akebono.dts +++ b/arch/powerpc/boot/dts/akebono.dts @@ -126,7 +126,7 @@ interrupts = <93 2>; }; - EHCI0: ehci@30010000000 { + EHCI0: usb@30010000000 { compatible = "ibm,476gtr-ehci", "generic-ehci"; reg = <0x300 0x10000000 0x0 0x10000>; interrupt-parent = <&MPIC>; @@ -140,14 +140,14 @@ interrupt-parent = <&MPIC>; }; - OHCI0: ohci@30010010000 { + OHCI0: usb@30010010000 { compatible = "ibm,476gtr-ohci", "generic-ohci"; reg = <0x300 0x10010000 0x0 0x10000>; interrupt-parent = <&MPIC>; interrupts = <89 1>; }; - OHCI1: ohci@30010020000 { + OHCI1: usb@30010020000 { compatible = "ibm,476gtr-ohci", "generic-ohci"; reg = <0x300 0x10020000 0x0 0x10000>; interrupt-parent = <&MPIC>; diff --git a/arch/powerpc/boot/dts/fsl/Makefile b/arch/powerpc/boot/dts/fsl/Makefile index 3bae982641e9..d3ecdf14bc42 100644 --- a/arch/powerpc/boot/dts/fsl/Makefile +++ b/arch/powerpc/boot/dts/fsl/Makefile @@ -1,4 +1,3 @@ # SPDX-License-Identifier: GPL-2.0 -dtstree := $(srctree)/$(src) -dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts)) +dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(src)/%.dts,%.dtb, $(wildcard $(src)/*.dts)) diff --git a/arch/powerpc/boot/dts/fsl/b4si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4si-post.dtsi index 4f044b41a776..fb3200b006ad 100644 --- a/arch/powerpc/boot/dts/fsl/b4si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/b4si-post.dtsi @@ -50,7 +50,7 @@ &ifc { #address-cells = <2>; #size-cells = <1>; - compatible = "fsl,ifc", "simple-bus"; + compatible = "fsl,ifc"; interrupts = <25 2 0 0>; }; diff --git a/arch/powerpc/boot/dts/fsl/bsc9131rdb.dts b/arch/powerpc/boot/dts/fsl/bsc9131rdb.dts index 8da984251abc..0ba86a6dce1b 100644 --- a/arch/powerpc/boot/dts/fsl/bsc9131rdb.dts +++ b/arch/powerpc/boot/dts/fsl/bsc9131rdb.dts @@ -15,7 +15,7 @@ device_type = "memory"; }; - board_ifc: ifc: ifc@ff71e000 { + board_ifc: ifc: memory-controller@ff71e000 { /* NAND Flash on board */ ranges = <0x0 0x0 0x0 0xff800000 0x00004000>; reg = <0x0 0xff71e000 0x0 0x2000>; diff --git a/arch/powerpc/boot/dts/fsl/bsc9131si-post.dtsi b/arch/powerpc/boot/dts/fsl/bsc9131si-post.dtsi index 2a677fd323eb..5c53cee8755f 100644 --- a/arch/powerpc/boot/dts/fsl/bsc9131si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/bsc9131si-post.dtsi @@ -35,7 +35,7 @@ &ifc { #address-cells = <2>; #size-cells = <1>; - compatible = "fsl,ifc", "simple-bus"; + compatible = "fsl,ifc"; interrupts = <16 2 0 0 20 2 0 0>; }; diff --git a/arch/powerpc/boot/dts/fsl/bsc9132qds.dts b/arch/powerpc/boot/dts/fsl/bsc9132qds.dts index 7cb2158dfe58..ce642e879a1b 100644 --- a/arch/powerpc/boot/dts/fsl/bsc9132qds.dts +++ b/arch/powerpc/boot/dts/fsl/bsc9132qds.dts @@ -15,7 +15,7 @@ device_type = "memory"; }; - ifc: ifc@ff71e000 { + ifc: memory-controller@ff71e000 { /* NOR, NAND Flash on board */ ranges = <0x0 0x0 0x0 0x88000000 0x08000000 0x1 0x0 0x0 0xff800000 0x00010000>; diff --git a/arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi b/arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi index b8e0edd1ac69..4da451e000d9 100644 --- a/arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi @@ -35,7 +35,7 @@ &ifc { #address-cells = <2>; #size-cells = <1>; - compatible = "fsl,ifc", "simple-bus"; + compatible = "fsl,ifc"; /* FIXME: Test whether interrupts are split */ interrupts = <16 2 0 0 20 2 0 0>; }; diff --git a/arch/powerpc/boot/dts/fsl/c293pcie.dts b/arch/powerpc/boot/dts/fsl/c293pcie.dts index 5e905e0857cf..e2fdac2ed420 100644 --- a/arch/powerpc/boot/dts/fsl/c293pcie.dts +++ b/arch/powerpc/boot/dts/fsl/c293pcie.dts @@ -42,7 +42,7 @@ device_type = "memory"; }; - ifc: ifc@fffe1e000 { + ifc: memory-controller@fffe1e000 { reg = <0xf 0xffe1e000 0 0x2000>; ranges = <0x0 0x0 0xf 0xec000000 0x04000000 0x1 0x0 0xf 0xff800000 0x00010000 diff --git a/arch/powerpc/boot/dts/fsl/c293si-post.dtsi b/arch/powerpc/boot/dts/fsl/c293si-post.dtsi index f208fb8f64b3..2d443d519274 100644 --- a/arch/powerpc/boot/dts/fsl/c293si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/c293si-post.dtsi @@ -35,7 +35,7 @@ &ifc { #address-cells = <2>; #size-cells = <1>; - compatible = "fsl,ifc", "simple-bus"; + compatible = "fsl,ifc"; interrupts = <19 2 0 0>; }; diff --git a/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi index 41935709ebe8..fba40a1bccc0 100644 --- a/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi @@ -199,6 +199,10 @@ /include/ "pq3-dma-0.dtsi" /include/ "pq3-etsec1-0.dtsi" + enet0: ethernet@24000 { + fsl,wake-on-filer; + fsl,pmc-handle = <&etsec1_clk>; + }; /include/ "pq3-etsec1-timer-0.dtsi" usb@22000 { @@ -222,9 +226,10 @@ }; /include/ "pq3-etsec1-2.dtsi" - - ethernet@26000 { + enet2: ethernet@26000 { cell-index = <1>; + fsl,wake-on-filer; + fsl,pmc-handle = <&etsec3_clk>; }; usb@2b000 { @@ -249,4 +254,9 @@ reg = <0xe0000 0x1000>; fsl,has-rstcr; }; + +/include/ "pq3-power.dtsi" + power@e0070 { + compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc"; + }; }; diff --git a/arch/powerpc/boot/dts/fsl/mpc8544si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8544si-post.dtsi index b68eb119faef..ea7416af7ee3 100644 --- a/arch/powerpc/boot/dts/fsl/mpc8544si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/mpc8544si-post.dtsi @@ -188,4 +188,6 @@ reg = <0xe0000 0x1000>; fsl,has-rstcr; }; + +/include/ "pq3-power.dtsi" }; diff --git a/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi index 579d76cb8e32..dddb7374508d 100644 --- a/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi @@ -156,4 +156,6 @@ reg = <0xe0000 0x1000>; fsl,has-rstcr; }; + +/include/ "pq3-power.dtsi" }; diff --git a/arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi index 49294cf36b4e..40a6cff77032 100644 --- a/arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi @@ -193,4 +193,6 @@ reg = <0xe0000 0x1000>; fsl,has-rstcr; }; + +/include/ "pq3-power.dtsi" }; diff --git a/arch/powerpc/boot/dts/fsl/p1010rdb-pb.dts b/arch/powerpc/boot/dts/fsl/p1010rdb-pb.dts index 3a94acbb3c03..ce3346d77858 100644 --- a/arch/powerpc/boot/dts/fsl/p1010rdb-pb.dts +++ b/arch/powerpc/boot/dts/fsl/p1010rdb-pb.dts @@ -29,3 +29,19 @@ }; /include/ "p1010si-post.dtsi" + +&pci0 { + pcie@0 { + interrupt-map = < + /* IDSEL 0x0 */ + /* + *irq[4:5] are active-high + *irq[6:7] are active-low + */ + 0000 0x0 0x0 0x1 &mpic 0x4 0x2 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x5 0x2 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0 + >; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1010rdb-pb_36b.dts b/arch/powerpc/boot/dts/fsl/p1010rdb-pb_36b.dts index 4cf255fedc96..83590354f9a0 100644 --- a/arch/powerpc/boot/dts/fsl/p1010rdb-pb_36b.dts +++ b/arch/powerpc/boot/dts/fsl/p1010rdb-pb_36b.dts @@ -56,3 +56,19 @@ }; /include/ "p1010si-post.dtsi" + +&pci0 { + pcie@0 { + interrupt-map = < + /* IDSEL 0x0 */ + /* + *irq[4:5] are active-high + *irq[6:7] are active-low + */ + 0000 0x0 0x0 0x1 &mpic 0x4 0x2 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x5 0x2 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0 + >; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1010rdb.dtsi b/arch/powerpc/boot/dts/fsl/p1010rdb.dtsi index 2ca9cee2ddeb..ef49a7d6c69d 100644 --- a/arch/powerpc/boot/dts/fsl/p1010rdb.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1010rdb.dtsi @@ -215,19 +215,3 @@ phy-connection-type = "sgmii"; }; }; - -&pci0 { - pcie@0 { - interrupt-map = < - /* IDSEL 0x0 */ - /* - *irq[4:5] are active-high - *irq[6:7] are active-low - */ - 0000 0x0 0x0 0x1 &mpic 0x4 0x2 0x0 0x0 - 0000 0x0 0x0 0x2 &mpic 0x5 0x2 0x0 0x0 - 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0 - 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0 - >; - }; -}; diff --git a/arch/powerpc/boot/dts/fsl/p1010rdb_32b.dtsi b/arch/powerpc/boot/dts/fsl/p1010rdb_32b.dtsi index fdc19aab2f70..583a6cd05079 100644 --- a/arch/powerpc/boot/dts/fsl/p1010rdb_32b.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1010rdb_32b.dtsi @@ -36,7 +36,7 @@ memory { device_type = "memory"; }; -board_ifc: ifc: ifc@ffe1e000 { +board_ifc: ifc: memory-controller@ffe1e000 { /* NOR, NAND Flashes and CPLD on board */ ranges = <0x0 0x0 0x0 0xee000000 0x02000000 0x1 0x0 0x0 0xff800000 0x00010000 diff --git a/arch/powerpc/boot/dts/fsl/p1010rdb_36b.dtsi b/arch/powerpc/boot/dts/fsl/p1010rdb_36b.dtsi index de2fceed4f79..4d41efe0038f 100644 --- a/arch/powerpc/boot/dts/fsl/p1010rdb_36b.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1010rdb_36b.dtsi @@ -36,7 +36,7 @@ memory { device_type = "memory"; }; -board_ifc: ifc: ifc@fffe1e000 { +board_ifc: ifc: memory-controller@fffe1e000 { /* NOR, NAND Flashes and CPLD on board */ ranges = <0x0 0x0 0xf 0xee000000 0x02000000 0x1 0x0 0xf 0xff800000 0x00010000 diff --git a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi index ccda0a91abf0..2d2550729dcc 100644 --- a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi @@ -35,7 +35,7 @@ &ifc { #address-cells = <2>; #size-cells = <1>; - compatible = "fsl,ifc", "simple-bus"; + compatible = "fsl,ifc"; interrupts = <16 2 0 0 19 2 0 0>; }; @@ -183,9 +183,23 @@ /include/ "pq3-etsec2-1.dtsi" /include/ "pq3-etsec2-2.dtsi" + enet0: ethernet@b0000 { + fsl,pmc-handle = <&etsec1_clk>; + }; + + enet1: ethernet@b1000 { + fsl,pmc-handle = <&etsec2_clk>; + }; + + enet2: ethernet@b2000 { + fsl,pmc-handle = <&etsec3_clk>; + }; + global-utilities@e0000 { compatible = "fsl,p1010-guts"; reg = <0xe0000 0x1000>; fsl,has-rstcr; }; + +/include/ "pq3-power.dtsi" }; diff --git a/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi index 642dc3a83d0e..cc4c7461003b 100644 --- a/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi @@ -163,14 +163,17 @@ /include/ "pq3-etsec2-0.dtsi" enet0: enet0_grp2: ethernet@b0000 { + fsl,pmc-handle = <&etsec1_clk>; }; /include/ "pq3-etsec2-1.dtsi" enet1: enet1_grp2: ethernet@b1000 { + fsl,pmc-handle = <&etsec2_clk>; }; /include/ "pq3-etsec2-2.dtsi" enet2: enet2_grp2: ethernet@b2000 { + fsl,pmc-handle = <&etsec3_clk>; }; global-utilities@e0000 { @@ -178,6 +181,8 @@ reg = <0xe0000 0x1000>; fsl,has-rstcr; }; + +/include/ "pq3-power.dtsi" }; /include/ "pq3-etsec2-grp2-0.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi index 407cb5fd0f5b..378195db9fca 100644 --- a/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi @@ -159,14 +159,17 @@ /include/ "pq3-etsec2-0.dtsi" enet0: enet0_grp2: ethernet@b0000 { + fsl,pmc-handle = <&etsec1_clk>; }; /include/ "pq3-etsec2-1.dtsi" enet1: enet1_grp2: ethernet@b1000 { + fsl,pmc-handle = <&etsec2_clk>; }; /include/ "pq3-etsec2-2.dtsi" enet2: enet2_grp2: ethernet@b2000 { + fsl,pmc-handle = <&etsec3_clk>; }; global-utilities@e0000 { @@ -174,6 +177,8 @@ reg = <0xe0000 0x1000>; fsl,has-rstcr; }; + +/include/ "pq3-power.dtsi" }; &qe { diff --git a/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi index 093e4e3ed368..6ac21e81344a 100644 --- a/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi @@ -225,11 +225,13 @@ /include/ "pq3-etsec2-0.dtsi" enet0: enet0_grp2: ethernet@b0000 { fsl,wake-on-filer; + fsl,pmc-handle = <&etsec1_clk>; }; /include/ "pq3-etsec2-1.dtsi" enet1: enet1_grp2: ethernet@b1000 { fsl,wake-on-filer; + fsl,pmc-handle = <&etsec2_clk>; }; global-utilities@e0000 { @@ -238,9 +240,10 @@ fsl,has-rstcr; }; +/include/ "pq3-power.dtsi" power@e0070 { - compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc"; - reg = <0xe0070 0x20>; + compatible = "fsl,p1022-pmc", "fsl,mpc8536-pmc", + "fsl,mpc8548-pmc"; }; }; diff --git a/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi index 81b9ab2119be..d410082d21c0 100644 --- a/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi @@ -178,6 +178,10 @@ compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr"; }; /include/ "pq3-etsec1-0.dtsi" + enet0: ethernet@24000 { + fsl,pmc-handle = <&etsec1_clk>; + + }; /include/ "pq3-etsec1-timer-0.dtsi" ptp_clock@24e00 { @@ -186,7 +190,15 @@ /include/ "pq3-etsec1-1.dtsi" + enet1: ethernet@25000 { + fsl,pmc-handle = <&etsec2_clk>; + }; + /include/ "pq3-etsec1-2.dtsi" + enet2: ethernet@26000 { + fsl,pmc-handle = <&etsec3_clk>; + }; + /include/ "pq3-esdhc-0.dtsi" sdhc@2e000 { compatible = "fsl,p2020-esdhc", "fsl,esdhc"; @@ -202,8 +214,5 @@ fsl,has-rstcr; }; - pmc: power@e0070 { - compatible = "fsl,mpc8548-pmc"; - reg = <0xe0070 0x20>; - }; +/include/ "pq3-power.dtsi" }; diff --git a/arch/powerpc/boot/dts/fsl/pq3-power.dtsi b/arch/powerpc/boot/dts/fsl/pq3-power.dtsi new file mode 100644 index 000000000000..6af12401004d --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-power.dtsi @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: (GPL-2.0+) +/* + * Copyright 2024 NXP + */ + +power@e0070 { + compatible = "fsl,mpc8548-pmc"; + reg = <0xe0070 0x20>; + + etsec1_clk: soc-clk@24 { + fsl,pmcdr-mask = <0x00000080>; + }; + etsec2_clk: soc-clk@25 { + fsl,pmcdr-mask = <0x00000040>; + }; + etsec3_clk: soc-clk@26 { + fsl,pmcdr-mask = <0x00000020>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi index aa5152ca8120..8ef0c020206b 100644 --- a/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi @@ -52,7 +52,7 @@ &ifc { #address-cells = <2>; #size-cells = <1>; - compatible = "fsl,ifc", "simple-bus"; + compatible = "fsl,ifc"; interrupts = <25 2 0 0>; }; diff --git a/arch/powerpc/boot/dts/fsl/t1024rdb.dts b/arch/powerpc/boot/dts/fsl/t1024rdb.dts index 270aaf631f2a..7d003e07a9fb 100644 --- a/arch/powerpc/boot/dts/fsl/t1024rdb.dts +++ b/arch/powerpc/boot/dts/fsl/t1024rdb.dts @@ -91,7 +91,7 @@ board-control@2,0 { #address-cells = <1>; #size-cells = <1>; - compatible = "fsl,t1024-cpld"; + compatible = "fsl,t1024-cpld", "fsl,deepsleep-cpld"; reg = <3 0 0x300>; ranges = <0 3 0 0x300>; bank-width = <1>; diff --git a/arch/powerpc/boot/dts/fsl/t1040rdb.dts b/arch/powerpc/boot/dts/fsl/t1040rdb.dts index dd3aab81e9de..4347924e9aa7 100644 --- a/arch/powerpc/boot/dts/fsl/t1040rdb.dts +++ b/arch/powerpc/boot/dts/fsl/t1040rdb.dts @@ -104,7 +104,7 @@ ifc: localbus@ffe124000 { cpld@3,0 { - compatible = "fsl,t1040rdb-cpld"; + compatible = "fsl,t104xrdb-cpld", "fsl,deepsleep-cpld"; }; }; }; diff --git a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi index 776788623204..c9542b73bd7f 100644 --- a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi @@ -52,7 +52,7 @@ &ifc { #address-cells = <2>; #size-cells = <1>; - compatible = "fsl,ifc", "simple-bus"; + compatible = "fsl,ifc"; interrupts = <25 2 0 0>; }; diff --git a/arch/powerpc/boot/dts/fsl/t1042rdb.dts b/arch/powerpc/boot/dts/fsl/t1042rdb.dts index 3ebb712224cb..099764322b33 100644 --- a/arch/powerpc/boot/dts/fsl/t1042rdb.dts +++ b/arch/powerpc/boot/dts/fsl/t1042rdb.dts @@ -68,7 +68,7 @@ ifc: localbus@ffe124000 { cpld@3,0 { - compatible = "fsl,t1042rdb-cpld"; + compatible = "fsl,t104xrdb-cpld", "fsl,deepsleep-cpld"; }; }; }; diff --git a/arch/powerpc/boot/dts/fsl/t1042rdb_pi.dts b/arch/powerpc/boot/dts/fsl/t1042rdb_pi.dts index 8ec3ff45e6fc..b10cab1a347b 100644 --- a/arch/powerpc/boot/dts/fsl/t1042rdb_pi.dts +++ b/arch/powerpc/boot/dts/fsl/t1042rdb_pi.dts @@ -41,7 +41,7 @@ ifc: localbus@ffe124000 { cpld@3,0 { - compatible = "fsl,t1042rdb_pi-cpld"; + compatible = "fsl,t104xrdb-cpld", "fsl,deepsleep-cpld"; }; }; diff --git a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi index 27714dc2f04a..6bb95878d39d 100644 --- a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi @@ -50,7 +50,7 @@ &ifc { #address-cells = <2>; #size-cells = <1>; - compatible = "fsl,ifc", "simple-bus"; + compatible = "fsl,ifc"; interrupts = <25 2 0 0>; }; diff --git a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi index fcac73486d48..65f3e17c0d41 100644 --- a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi @@ -50,7 +50,7 @@ &ifc { #address-cells = <2>; #size-cells = <1>; - compatible = "fsl,ifc", "simple-bus"; + compatible = "fsl,ifc"; interrupts = <25 2 0 0>; }; diff --git a/arch/powerpc/boot/dts/haleakala.dts b/arch/powerpc/boot/dts/haleakala.dts deleted file mode 100644 index f81ce8786d59..000000000000 --- a/arch/powerpc/boot/dts/haleakala.dts +++ /dev/null @@ -1,281 +0,0 @@ -/* - * Device Tree Source for AMCC Haleakala (405EXr) - * - * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without - * any warranty of any kind, whether express or implied. - */ - -/dts-v1/; - -/ { - #address-cells = <1>; - #size-cells = <1>; - model = "amcc,haleakala"; - compatible = "amcc,haleakala", "amcc,kilauea"; - dcr-parent = <&{/cpus/cpu@0}>; - - aliases { - ethernet0 = &EMAC0; - serial0 = &UART0; - serial1 = &UART1; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - model = "PowerPC,405EXr"; - reg = <0x00000000>; - clock-frequency = <0>; /* Filled in by U-Boot */ - timebase-frequency = <0>; /* Filled in by U-Boot */ - i-cache-line-size = <32>; - d-cache-line-size = <32>; - i-cache-size = <16384>; /* 16 kB */ - d-cache-size = <16384>; /* 16 kB */ - dcr-controller; - dcr-access-method = "native"; - }; - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */ - }; - - UIC0: interrupt-controller { - compatible = "ibm,uic-405exr", "ibm,uic"; - interrupt-controller; - cell-index = <0>; - dcr-reg = <0x0c0 0x009>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - }; - - UIC1: interrupt-controller1 { - compatible = "ibm,uic-405exr","ibm,uic"; - interrupt-controller; - cell-index = <1>; - dcr-reg = <0x0d0 0x009>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ - interrupt-parent = <&UIC0>; - }; - - UIC2: interrupt-controller2 { - compatible = "ibm,uic-405exr","ibm,uic"; - interrupt-controller; - cell-index = <2>; - dcr-reg = <0x0e0 0x009>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */ - interrupt-parent = <&UIC0>; - }; - - plb { - compatible = "ibm,plb-405exr", "ibm,plb4"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - clock-frequency = <0>; /* Filled in by U-Boot */ - - SDRAM0: memory-controller { - compatible = "ibm,sdram-405exr", "ibm,sdram-4xx-ddr2"; - dcr-reg = <0x010 0x002>; - interrupt-parent = <&UIC2>; - interrupts = <0x5 0x4 /* ECC DED Error */ - 0x6 0x4>; /* ECC SEC Error */ - }; - - MAL0: mcmal { - compatible = "ibm,mcmal-405exr", "ibm,mcmal2"; - dcr-reg = <0x180 0x062>; - num-tx-chans = <2>; - num-rx-chans = <2>; - interrupt-parent = <&MAL0>; - interrupts = <0x0 0x1 0x2 0x3 0x4>; - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4 - /*RXEOB*/ 0x1 &UIC0 0xb 0x4 - /*SERR*/ 0x2 &UIC1 0x0 0x4 - /*TXDE*/ 0x3 &UIC1 0x1 0x4 - /*RXDE*/ 0x4 &UIC1 0x2 0x4>; - interrupt-map-mask = <0xffffffff>; - }; - - POB0: opb { - compatible = "ibm,opb-405exr", "ibm,opb"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x80000000 0x80000000 0x10000000 - 0xef600000 0xef600000 0x00a00000 - 0xf0000000 0xf0000000 0x10000000>; - dcr-reg = <0x0a0 0x005>; - clock-frequency = <0>; /* Filled in by U-Boot */ - - EBC0: ebc { - compatible = "ibm,ebc-405exr", "ibm,ebc"; - dcr-reg = <0x012 0x002>; - #address-cells = <2>; - #size-cells = <1>; - clock-frequency = <0>; /* Filled in by U-Boot */ - /* ranges property is supplied by U-Boot */ - interrupts = <0x5 0x1>; - interrupt-parent = <&UIC1>; - - nor_flash@0,0 { - compatible = "amd,s29gl512n", "cfi-flash"; - bank-width = <2>; - reg = <0x00000000 0x00000000 0x04000000>; - #address-cells = <1>; - #size-cells = <1>; - partition@0 { - label = "kernel"; - reg = <0x00000000 0x00200000>; - }; - partition@200000 { - label = "root"; - reg = <0x00200000 0x00200000>; - }; - partition@400000 { - label = "user"; - reg = <0x00400000 0x03b60000>; - }; - partition@3f60000 { - label = "env"; - reg = <0x03f60000 0x00040000>; - }; - partition@3fa0000 { - label = "u-boot"; - reg = <0x03fa0000 0x00060000>; - }; - }; - }; - - UART0: serial@ef600200 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0xef600200 0x00000008>; - virtual-reg = <0xef600200>; - clock-frequency = <0>; /* Filled in by U-Boot */ - current-speed = <0>; - interrupt-parent = <&UIC0>; - interrupts = <0x1a 0x4>; - }; - - UART1: serial@ef600300 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0xef600300 0x00000008>; - virtual-reg = <0xef600300>; - clock-frequency = <0>; /* Filled in by U-Boot */ - current-speed = <0>; - interrupt-parent = <&UIC0>; - interrupts = <0x1 0x4>; - }; - - IIC0: i2c@ef600400 { - compatible = "ibm,iic-405exr", "ibm,iic"; - reg = <0xef600400 0x00000014>; - interrupt-parent = <&UIC0>; - interrupts = <0x2 0x4>; - }; - - IIC1: i2c@ef600500 { - compatible = "ibm,iic-405exr", "ibm,iic"; - reg = <0xef600500 0x00000014>; - interrupt-parent = <&UIC0>; - interrupts = <0x7 0x4>; - }; - - - RGMII0: emac-rgmii@ef600b00 { - compatible = "ibm,rgmii-405exr", "ibm,rgmii"; - reg = <0xef600b00 0x00000104>; - has-mdio; - }; - - EMAC0: ethernet@ef600900 { - linux,network-index = <0x0>; - device_type = "network"; - compatible = "ibm,emac-405exr", "ibm,emac4sync"; - interrupt-parent = <&EMAC0>; - interrupts = <0x0 0x1>; - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4 - /*Wake*/ 0x1 &UIC1 0x1d 0x4>; - reg = <0xef600900 0x000000c4>; - local-mac-address = [000000000000]; /* Filled in by U-Boot */ - mal-device = <&MAL0>; - mal-tx-channel = <0>; - mal-rx-channel = <0>; - cell-index = <0>; - max-frame-size = <9000>; - rx-fifo-size = <4096>; - tx-fifo-size = <2048>; - rx-fifo-size-gige = <16384>; - tx-fifo-size-gige = <16384>; - phy-mode = "rgmii"; - phy-map = <0x00000000>; - rgmii-device = <&RGMII0>; - rgmii-channel = <0>; - has-inverted-stacr-oc; - has-new-stacr-staopc; - }; - }; - - PCIE0: pcie@a0000000 { - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex"; - primary; - port = <0x0>; /* port number */ - reg = <0xa0000000 0x20000000 /* Config space access */ - 0xef000000 0x00001000>; /* Registers */ - dcr-reg = <0x040 0x020>; - sdr-base = <0x400>; - - /* Outbound ranges, one memory and one IO, - * later cannot be changed - */ - ranges = <0x02000000 0x00000000 0x80000000 0x90000000 0x00000000 0x08000000 - 0x01000000 0x00000000 0x00000000 0xe0000000 0x00000000 0x00010000>; - - /* Inbound 2GB range starting at 0 */ - dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>; - - /* This drives busses 0x00 to 0x3f */ - bus-range = <0x0 0x3f>; - - /* Legacy interrupts (note the weird polarity, the bridge seems - * to invert PCIe legacy interrupts). - * We are de-swizzling here because the numbers are actually for - * port of the root complex virtual P2P bridge. But I want - * to avoid putting a node for it in the tree, so the numbers - * below are basically de-swizzled numbers. - * The real slot is on idsel 0, so the swizzling is 1:1 - */ - interrupt-map-mask = <0x0 0x0 0x0 0x7>; - interrupt-map = < - 0x0 0x0 0x0 0x1 &UIC2 0x0 0x4 /* swizzled int A */ - 0x0 0x0 0x0 0x2 &UIC2 0x1 0x4 /* swizzled int B */ - 0x0 0x0 0x0 0x3 &UIC2 0x2 0x4 /* swizzled int C */ - 0x0 0x0 0x0 0x4 &UIC2 0x3 0x4 /* swizzled int D */>; - }; - }; -}; diff --git a/arch/powerpc/boot/dts/hotfoot.dts b/arch/powerpc/boot/dts/hotfoot.dts deleted file mode 100644 index b93bf2d9dd5b..000000000000 --- a/arch/powerpc/boot/dts/hotfoot.dts +++ /dev/null @@ -1,296 +0,0 @@ -/* - * Device Tree Source for ESTeem 195E Hotfoot - * - * Copyright 2009 AbsoluteValue Systems <solomon@linux-wlan.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without - * any warranty of any kind, whether express or implied. - */ - -/dts-v1/; - -/ { - #address-cells = <1>; - #size-cells = <1>; - model = "est,hotfoot"; - compatible = "est,hotfoot"; - dcr-parent = <&{/cpus/cpu@0}>; - - aliases { - ethernet0 = &EMAC0; - ethernet1 = &EMAC1; - serial0 = &UART0; - serial1 = &UART1; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - model = "PowerPC,405EP"; - reg = <0x00000000>; - clock-frequency = <0>; /* Filled in by zImage */ - timebase-frequency = <0>; /* Filled in by zImage */ - i-cache-line-size = <0x20>; - d-cache-line-size = <0x20>; - i-cache-size = <0x4000>; - d-cache-size = <0x4000>; - dcr-controller; - dcr-access-method = "native"; - }; - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x00000000>; /* Filled in by zImage */ - }; - - UIC0: interrupt-controller { - compatible = "ibm,uic"; - interrupt-controller; - cell-index = <0>; - dcr-reg = <0x0c0 0x009>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - }; - - plb { - compatible = "ibm,plb3"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - clock-frequency = <0>; /* Filled in by zImage */ - - SDRAM0: memory-controller { - compatible = "ibm,sdram-405ep"; - dcr-reg = <0x010 0x002>; - }; - - MAL: mcmal { - compatible = "ibm,mcmal-405ep", "ibm,mcmal"; - dcr-reg = <0x180 0x062>; - num-tx-chans = <4>; - num-rx-chans = <2>; - interrupt-parent = <&UIC0>; - interrupts = < - 0xb 0x4 /* TXEOB */ - 0xc 0x4 /* RXEOB */ - 0xa 0x4 /* SERR */ - 0xd 0x4 /* TXDE */ - 0xe 0x4 /* RXDE */>; - }; - - POB0: opb { - compatible = "ibm,opb-405ep", "ibm,opb"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0xef600000 0xef600000 0x00a00000>; - dcr-reg = <0x0a0 0x005>; - clock-frequency = <0>; /* Filled in by zImage */ - - /* Hotfoot has UART0/UART1 swapped */ - - UART0: serial@ef600400 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0xef600400 0x00000008>; - virtual-reg = <0xef600400>; - clock-frequency = <0>; /* Filled in by zImage */ - current-speed = <0x9600>; - interrupt-parent = <&UIC0>; - interrupts = <0x1 0x4>; - }; - - UART1: serial@ef600300 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0xef600300 0x00000008>; - virtual-reg = <0xef600300>; - clock-frequency = <0>; /* Filled in by zImage */ - current-speed = <0x9600>; - interrupt-parent = <&UIC0>; - interrupts = <0x0 0x4>; - }; - - IIC: i2c@ef600500 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "ibm,iic-405ep", "ibm,iic"; - reg = <0xef600500 0x00000011>; - interrupt-parent = <&UIC0>; - interrupts = <0x2 0x4>; - - rtc@68 { - /* Actually a DS1339 */ - compatible = "dallas,ds1307"; - reg = <0x68>; - }; - - temp@4a { - /* Not present on all boards */ - compatible = "national,lm75"; - reg = <0x4a>; - }; - }; - - GPIO: gpio@ef600700 { - #gpio-cells = <2>; - compatible = "ibm,ppc4xx-gpio"; - reg = <0xef600700 0x00000020>; - gpio-controller; - }; - - gpio-leds { - compatible = "gpio-leds"; - status { - label = "Status"; - gpios = <&GPIO 1 0>; - }; - radiorx { - label = "Rx"; - gpios = <&GPIO 0xe 0>; - }; - }; - - EMAC0: ethernet@ef600800 { - linux,network-index = <0x0>; - device_type = "network"; - compatible = "ibm,emac-405ep", "ibm,emac"; - interrupt-parent = <&UIC0>; - interrupts = < - 0xf 0x4 /* Ethernet */ - 0x9 0x4 /* Ethernet Wake Up */>; - local-mac-address = [000000000000]; /* Filled in by zImage */ - reg = <0xef600800 0x00000070>; - mal-device = <&MAL>; - mal-tx-channel = <0>; - mal-rx-channel = <0>; - cell-index = <0>; - max-frame-size = <0x5dc>; - rx-fifo-size = <0x1000>; - tx-fifo-size = <0x800>; - phy-mode = "mii"; - phy-map = <0x00000000>; - }; - - EMAC1: ethernet@ef600900 { - linux,network-index = <0x1>; - device_type = "network"; - compatible = "ibm,emac-405ep", "ibm,emac"; - interrupt-parent = <&UIC0>; - interrupts = < - 0x11 0x4 /* Ethernet */ - 0x9 0x4 /* Ethernet Wake Up */>; - local-mac-address = [000000000000]; /* Filled in by zImage */ - reg = <0xef600900 0x00000070>; - mal-device = <&MAL>; - mal-tx-channel = <2>; - mal-rx-channel = <1>; - cell-index = <1>; - max-frame-size = <0x5dc>; - rx-fifo-size = <0x1000>; - tx-fifo-size = <0x800>; - mdio-device = <&EMAC0>; - phy-mode = "mii"; - phy-map = <0x0000001>; - }; - }; - - EBC0: ebc { - compatible = "ibm,ebc-405ep", "ibm,ebc"; - dcr-reg = <0x012 0x002>; - #address-cells = <2>; - #size-cells = <1>; - - /* The ranges property is supplied by the bootwrapper - * and is based on the firmware's configuration of the - * EBC bridge - */ - clock-frequency = <0>; /* Filled in by zImage */ - - nor_flash@0 { - compatible = "cfi-flash"; - bank-width = <2>; - reg = <0x0 0xff800000 0x00800000>; - #address-cells = <1>; - #size-cells = <1>; - - /* This mapping is for the 8M flash - 4M flash has all ofssets -= 4M, - and FeatFS partition is not present */ - partition@0 { - label = "Bootloader"; - reg = <0x7c0000 0x40000>; - /* read-only; */ - }; - partition@1 { - label = "Env_and_Config_Primary"; - reg = <0x400000 0x10000>; - }; - partition@2 { - label = "Kernel"; - reg = <0x420000 0x100000>; - }; - partition@3 { - label = "Filesystem"; - reg = <0x520000 0x2a0000>; - }; - partition@4 { - label = "Env_and_Config_Secondary"; - reg = <0x410000 0x10000>; - }; - partition@5 { - label = "FeatFS"; - reg = <0x000000 0x400000>; - }; - partition@6 { - label = "Bootloader_Env"; - reg = <0x7d0000 0x10000>; - }; - }; - }; - - PCI0: pci@ec000000 { - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - compatible = "ibm,plb405ep-pci", "ibm,plb-pci"; - primary; - reg = <0xeec00000 0x00000008 /* Config space access */ - 0xeed80000 0x00000004 /* IACK */ - 0xeed80000 0x00000004 /* Special cycle */ - 0xef480000 0x00000040>; /* Internal registers */ - - /* Outbound ranges, one memory and one IO, - * later cannot be changed. Chip supports a second - * IO range but we don't use it for now - */ - ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000 - 0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>; - - /* Inbound 2GB range starting at 0 */ - dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>; - - interrupt-parent = <&UIC0>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 3 -- slot1 (optional) 27/29 A/B IRQ2/4 */ - 0x1800 0x0 0x0 0x1 &UIC0 0x1b 0x8 - 0x1800 0x0 0x0 0x2 &UIC0 0x1d 0x8 - - /* IDSEL 4 -- slot0, 26/28 A/B IRQ1/3 */ - 0x2000 0x0 0x0 0x1 &UIC0 0x1a 0x8 - 0x2000 0x0 0x0 0x2 &UIC0 0x1c 0x8 - >; - }; - }; - - chosen { - stdout-path = &UART0; - }; -}; diff --git a/arch/powerpc/boot/dts/kilauea.dts b/arch/powerpc/boot/dts/kilauea.dts deleted file mode 100644 index c07a7525a72c..000000000000 --- a/arch/powerpc/boot/dts/kilauea.dts +++ /dev/null @@ -1,407 +0,0 @@ -/* - * Device Tree Source for AMCC Kilauea (405EX) - * - * Copyright 2007-2009 DENX Software Engineering, Stefan Roese <sr@denx.de> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without - * any warranty of any kind, whether express or implied. - */ - -/dts-v1/; - -/ { - #address-cells = <1>; - #size-cells = <1>; - model = "amcc,kilauea"; - compatible = "amcc,kilauea"; - dcr-parent = <&{/cpus/cpu@0}>; - - aliases { - ethernet0 = &EMAC0; - ethernet1 = &EMAC1; - serial0 = &UART0; - serial1 = &UART1; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - model = "PowerPC,405EX"; - reg = <0x00000000>; - clock-frequency = <0>; /* Filled in by U-Boot */ - timebase-frequency = <0>; /* Filled in by U-Boot */ - i-cache-line-size = <32>; - d-cache-line-size = <32>; - i-cache-size = <16384>; /* 16 kB */ - d-cache-size = <16384>; /* 16 kB */ - dcr-controller; - dcr-access-method = "native"; - }; - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */ - }; - - UIC0: interrupt-controller { - compatible = "ibm,uic-405ex", "ibm,uic"; - interrupt-controller; - cell-index = <0>; - dcr-reg = <0x0c0 0x009>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - }; - - UIC1: interrupt-controller1 { - compatible = "ibm,uic-405ex","ibm,uic"; - interrupt-controller; - cell-index = <1>; - dcr-reg = <0x0d0 0x009>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ - interrupt-parent = <&UIC0>; - }; - - UIC2: interrupt-controller2 { - compatible = "ibm,uic-405ex","ibm,uic"; - interrupt-controller; - cell-index = <2>; - dcr-reg = <0x0e0 0x009>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */ - interrupt-parent = <&UIC0>; - }; - - CPM0: cpm { - compatible = "ibm,cpm"; - dcr-access-method = "native"; - dcr-reg = <0x0b0 0x003>; - unused-units = <0x00000000>; - idle-doze = <0x02000000>; - standby = <0xe3e74800>; - }; - - plb { - compatible = "ibm,plb-405ex", "ibm,plb4"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - clock-frequency = <0>; /* Filled in by U-Boot */ - - SDRAM0: memory-controller { - compatible = "ibm,sdram-405ex", "ibm,sdram-4xx-ddr2"; - dcr-reg = <0x010 0x002>; - interrupt-parent = <&UIC2>; - interrupts = <0x5 0x4 /* ECC DED Error */ - 0x6 0x4>; /* ECC SEC Error */ - }; - - CRYPTO: crypto@ef700000 { - compatible = "amcc,ppc405ex-crypto", "amcc,ppc4xx-crypto"; - reg = <0xef700000 0x80400>; - interrupt-parent = <&UIC0>; - interrupts = <0x17 0x2>; - }; - - MAL0: mcmal { - compatible = "ibm,mcmal-405ex", "ibm,mcmal2"; - dcr-reg = <0x180 0x062>; - num-tx-chans = <2>; - num-rx-chans = <2>; - interrupt-parent = <&MAL0>; - interrupts = <0x0 0x1 0x2 0x3 0x4>; - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4 - /*RXEOB*/ 0x1 &UIC0 0xb 0x4 - /*SERR*/ 0x2 &UIC1 0x0 0x4 - /*TXDE*/ 0x3 &UIC1 0x1 0x4 - /*RXDE*/ 0x4 &UIC1 0x2 0x4>; - interrupt-map-mask = <0xffffffff>; - }; - - POB0: opb { - compatible = "ibm,opb-405ex", "ibm,opb"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x80000000 0x80000000 0x10000000 - 0xef600000 0xef600000 0x00a00000 - 0xf0000000 0xf0000000 0x10000000>; - dcr-reg = <0x0a0 0x005>; - clock-frequency = <0>; /* Filled in by U-Boot */ - - EBC0: ebc { - compatible = "ibm,ebc-405ex", "ibm,ebc"; - dcr-reg = <0x012 0x002>; - #address-cells = <2>; - #size-cells = <1>; - clock-frequency = <0>; /* Filled in by U-Boot */ - /* ranges property is supplied by U-Boot */ - interrupts = <0x5 0x1>; - interrupt-parent = <&UIC1>; - - nor_flash@0,0 { - compatible = "amd,s29gl512n", "cfi-flash"; - bank-width = <2>; - reg = <0x00000000 0x00000000 0x04000000>; - #address-cells = <1>; - #size-cells = <1>; - partition@0 { - label = "kernel"; - reg = <0x00000000 0x001e0000>; - }; - partition@1e0000 { - label = "dtb"; - reg = <0x001e0000 0x00020000>; - }; - partition@200000 { - label = "root"; - reg = <0x00200000 0x00200000>; - }; - partition@400000 { - label = "user"; - reg = <0x00400000 0x03b60000>; - }; - partition@3f60000 { - label = "env"; - reg = <0x03f60000 0x00040000>; - }; - partition@3fa0000 { - label = "u-boot"; - reg = <0x03fa0000 0x00060000>; - }; - }; - - ndfc@1,0 { - compatible = "ibm,ndfc"; - reg = <0x00000001 0x00000000 0x00002000>; - ccr = <0x00001000>; - bank-settings = <0x80002222>; - #address-cells = <1>; - #size-cells = <1>; - - nand { - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x00000000 0x00100000>; - }; - partition@100000 { - label = "user"; - reg = <0x00000000 0x03f00000>; - }; - }; - }; - }; - - UART0: serial@ef600200 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0xef600200 0x00000008>; - virtual-reg = <0xef600200>; - clock-frequency = <0>; /* Filled in by U-Boot */ - current-speed = <0>; - interrupt-parent = <&UIC0>; - interrupts = <0x1a 0x4>; - }; - - UART1: serial@ef600300 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0xef600300 0x00000008>; - virtual-reg = <0xef600300>; - clock-frequency = <0>; /* Filled in by U-Boot */ - current-speed = <0>; - interrupt-parent = <&UIC0>; - interrupts = <0x1 0x4>; - }; - - IIC0: i2c@ef600400 { - compatible = "ibm,iic-405ex", "ibm,iic"; - reg = <0xef600400 0x00000014>; - interrupt-parent = <&UIC0>; - interrupts = <0x2 0x4>; - #address-cells = <1>; - #size-cells = <0>; - - rtc@68 { - compatible = "dallas,ds1338"; - reg = <0x68>; - }; - - dtt@48 { - compatible = "dallas,ds1775"; - reg = <0x48>; - }; - }; - - IIC1: i2c@ef600500 { - compatible = "ibm,iic-405ex", "ibm,iic"; - reg = <0xef600500 0x00000014>; - interrupt-parent = <&UIC0>; - interrupts = <0x7 0x4>; - }; - - RGMII0: emac-rgmii@ef600b00 { - compatible = "ibm,rgmii-405ex", "ibm,rgmii"; - reg = <0xef600b00 0x00000104>; - has-mdio; - }; - - EMAC0: ethernet@ef600900 { - linux,network-index = <0x0>; - device_type = "network"; - compatible = "ibm,emac-405ex", "ibm,emac4sync"; - interrupt-parent = <&EMAC0>; - interrupts = <0x0 0x1>; - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4 - /*Wake*/ 0x1 &UIC1 0x1d 0x4>; - reg = <0xef600900 0x000000c4>; - local-mac-address = [000000000000]; /* Filled in by U-Boot */ - mal-device = <&MAL0>; - mal-tx-channel = <0>; - mal-rx-channel = <0>; - cell-index = <0>; - max-frame-size = <9000>; - rx-fifo-size = <4096>; - tx-fifo-size = <2048>; - rx-fifo-size-gige = <16384>; - tx-fifo-size-gige = <16384>; - phy-mode = "rgmii"; - phy-map = <0x00000000>; - rgmii-device = <&RGMII0>; - rgmii-channel = <0>; - has-inverted-stacr-oc; - has-new-stacr-staopc; - }; - - EMAC1: ethernet@ef600a00 { - linux,network-index = <0x1>; - device_type = "network"; - compatible = "ibm,emac-405ex", "ibm,emac4sync"; - interrupt-parent = <&EMAC1>; - interrupts = <0x0 0x1>; - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4 - /*Wake*/ 0x1 &UIC1 0x1f 0x4>; - reg = <0xef600a00 0x000000c4>; - local-mac-address = [000000000000]; /* Filled in by U-Boot */ - mal-device = <&MAL0>; - mal-tx-channel = <1>; - mal-rx-channel = <1>; - cell-index = <1>; - max-frame-size = <9000>; - rx-fifo-size = <4096>; - tx-fifo-size = <2048>; - rx-fifo-size-gige = <16384>; - tx-fifo-size-gige = <16384>; - phy-mode = "rgmii"; - phy-map = <0x00000000>; - rgmii-device = <&RGMII0>; - rgmii-channel = <1>; - has-inverted-stacr-oc; - has-new-stacr-staopc; - }; - }; - - PCIE0: pcie@a0000000 { - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex"; - primary; - port = <0x0>; /* port number */ - reg = <0xa0000000 0x20000000 /* Config space access */ - 0xef000000 0x00001000>; /* Registers */ - dcr-reg = <0x040 0x020>; - sdr-base = <0x400>; - - /* Outbound ranges, one memory and one IO, - * later cannot be changed - */ - ranges = <0x02000000 0x00000000 0x80000000 0x90000000 0x00000000 0x08000000 - 0x01000000 0x00000000 0x00000000 0xe0000000 0x00000000 0x00010000>; - - /* Inbound 2GB range starting at 0 */ - dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>; - - /* This drives busses 0x00 to 0x3f */ - bus-range = <0x0 0x3f>; - - /* Legacy interrupts (note the weird polarity, the bridge seems - * to invert PCIe legacy interrupts). - * We are de-swizzling here because the numbers are actually for - * port of the root complex virtual P2P bridge. But I want - * to avoid putting a node for it in the tree, so the numbers - * below are basically de-swizzled numbers. - * The real slot is on idsel 0, so the swizzling is 1:1 - */ - interrupt-map-mask = <0x0 0x0 0x0 0x7>; - interrupt-map = < - 0x0 0x0 0x0 0x1 &UIC2 0x0 0x4 /* swizzled int A */ - 0x0 0x0 0x0 0x2 &UIC2 0x1 0x4 /* swizzled int B */ - 0x0 0x0 0x0 0x3 &UIC2 0x2 0x4 /* swizzled int C */ - 0x0 0x0 0x0 0x4 &UIC2 0x3 0x4 /* swizzled int D */>; - }; - - PCIE1: pcie@c0000000 { - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex"; - primary; - port = <0x1>; /* port number */ - reg = <0xc0000000 0x20000000 /* Config space access */ - 0xef001000 0x00001000>; /* Registers */ - dcr-reg = <0x060 0x020>; - sdr-base = <0x440>; - - /* Outbound ranges, one memory and one IO, - * later cannot be changed - */ - ranges = <0x02000000 0x00000000 0x80000000 0x98000000 0x00000000 0x08000000 - 0x01000000 0x00000000 0x00000000 0xe0010000 0x00000000 0x00010000>; - - /* Inbound 2GB range starting at 0 */ - dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>; - - /* This drives busses 0x40 to 0x7f */ - bus-range = <0x40 0x7f>; - - /* Legacy interrupts (note the weird polarity, the bridge seems - * to invert PCIe legacy interrupts). - * We are de-swizzling here because the numbers are actually for - * port of the root complex virtual P2P bridge. But I want - * to avoid putting a node for it in the tree, so the numbers - * below are basically de-swizzled numbers. - * The real slot is on idsel 0, so the swizzling is 1:1 - */ - interrupt-map-mask = <0x0 0x0 0x0 0x7>; - interrupt-map = < - 0x0 0x0 0x0 0x1 &UIC2 0xb 0x4 /* swizzled int A */ - 0x0 0x0 0x0 0x2 &UIC2 0xc 0x4 /* swizzled int B */ - 0x0 0x0 0x0 0x3 &UIC2 0xd 0x4 /* swizzled int C */ - 0x0 0x0 0x0 0x4 &UIC2 0xe 0x4 /* swizzled int D */>; - }; - }; -}; diff --git a/arch/powerpc/boot/dts/klondike.dts b/arch/powerpc/boot/dts/klondike.dts deleted file mode 100644 index 97432177892a..000000000000 --- a/arch/powerpc/boot/dts/klondike.dts +++ /dev/null @@ -1,212 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Device Tree for Klondike (APM8018X) board. - * - * Copyright (c) 2010, Applied Micro Circuits Corporation - * Author: Tanmay Inamdar <tinamdar@apm.com> - */ - -/dts-v1/; - -/ { - #address-cells = <1>; - #size-cells = <1>; - model = "apm,klondike"; - compatible = "apm,klondike"; - dcr-parent = <&{/cpus/cpu@0}>; - - aliases { - ethernet0 = &EMAC0; - ethernet1 = &EMAC1; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - model = "PowerPC,apm8018x"; - reg = <0x00000000>; - clock-frequency = <300000000>; /* Filled in by U-Boot */ - timebase-frequency = <300000000>; /* Filled in by U-Boot */ - i-cache-line-size = <32>; - d-cache-line-size = <32>; - i-cache-size = <16384>; /* 16 kB */ - d-cache-size = <16384>; /* 16 kB */ - dcr-controller; - dcr-access-method = "native"; - }; - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x20000000>; /* Filled in by U-Boot */ - }; - - UIC0: interrupt-controller { - compatible = "ibm,uic"; - interrupt-controller; - cell-index = <0>; - dcr-reg = <0x0c0 0x010>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - }; - - UIC1: interrupt-controller1 { - compatible = "ibm,uic"; - interrupt-controller; - cell-index = <1>; - dcr-reg = <0x0d0 0x010>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ - interrupt-parent = <&UIC0>; - }; - - UIC2: interrupt-controller2 { - compatible = "ibm,uic"; - interrupt-controller; - cell-index = <2>; - dcr-reg = <0x0e0 0x010>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - interrupts = <0x0a 0x4 0x0b 0x4>; /* cascade */ - interrupt-parent = <&UIC0>; - }; - - UIC3: interrupt-controller3 { - compatible = "ibm,uic"; - interrupt-controller; - cell-index = <3>; - dcr-reg = <0x0f0 0x010>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - interrupts = <0x10 0x4 0x11 0x4>; /* cascade */ - interrupt-parent = <&UIC0>; - }; - - plb { - compatible = "ibm,plb4"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - clock-frequency = <0>; /* Filled in by U-Boot */ - - SDRAM0: memory-controller { - compatible = "ibm,sdram-apm8018x"; - dcr-reg = <0x010 0x002>; - }; - - MAL0: mcmal { - compatible = "ibm,mcmal2"; - dcr-reg = <0x180 0x062>; - num-tx-chans = <2>; - num-rx-chans = <16>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-parent = <&UIC1>; - interrupts = </*TXEOB*/ 0x6 0x4 - /*RXEOB*/ 0x7 0x4 - /*SERR*/ 0x1 0x4 - /*TXDE*/ 0x2 0x4 - /*RXDE*/ 0x3 0x4>; - }; - - POB0: opb { - compatible = "ibm,opb"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x20000000 0x20000000 0x30000000 - 0x50000000 0x50000000 0x10000000 - 0x60000000 0x60000000 0x10000000 - 0xFE000000 0xFE000000 0x00010000>; - dcr-reg = <0x100 0x020>; - clock-frequency = <300000000>; /* Filled in by U-Boot */ - - RGMII0: emac-rgmii@400a2000 { - compatible = "ibm,rgmii"; - reg = <0x400a2000 0x00000010>; - has-mdio; - }; - - TAH0: emac-tah@400a3000 { - compatible = "ibm,tah"; - reg = <0x400a3000 0x100>; - }; - - TAH1: emac-tah@400a4000 { - compatible = "ibm,tah"; - reg = <0x400a4000 0x100>; - }; - - EMAC0: ethernet@400a0000 { - compatible = "ibm,emac4", "ibm-emac4sync"; - interrupt-parent = <&EMAC0>; - interrupts = <0x0>; - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = </*Status*/ 0x0 &UIC0 0x13 0x4>; - reg = <0x400a0000 0x00000100>; - local-mac-address = [000000000000]; /* Filled in by U-Boot */ - mal-device = <&MAL0>; - mal-tx-channel = <0x0>; - mal-rx-channel = <0x0>; - cell-index = <0>; - max-frame-size = <9000>; - rx-fifo-size = <4096>; - tx-fifo-size = <2048>; - phy-mode = "rgmii"; - phy-address = <0x2>; - turbo = "no"; - phy-map = <0x00000000>; - rgmii-device = <&RGMII0>; - rgmii-channel = <0>; - tah-device = <&TAH0>; - tah-channel = <0>; - has-inverted-stacr-oc; - has-new-stacr-staopc; - }; - - EMAC1: ethernet@400a1000 { - compatible = "ibm,emac4", "ibm-emac4sync"; - status = "disabled"; - interrupt-parent = <&EMAC1>; - interrupts = <0x0>; - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = </*Status*/ 0x0 &UIC0 0x14 0x4>; - reg = <0x400a1000 0x00000100>; - local-mac-address = [000000000000]; /* Filled in by U-Boot */ - mal-device = <&MAL0>; - mal-tx-channel = <1>; - mal-rx-channel = <8>; - cell-index = <1>; - max-frame-size = <9000>; - rx-fifo-size = <4096>; - tx-fifo-size = <2048>; - phy-mode = "rgmii"; - phy-address = <0x3>; - turbo = "no"; - phy-map = <0x00000000>; - rgmii-device = <&RGMII0>; - rgmii-channel = <1>; - tah-device = <&TAH1>; - tah-channel = <0>; - has-inverted-stacr-oc; - has-new-stacr-staopc; - mdio-device = <&EMAC0>; - }; - }; - }; - - chosen { - stdout-path = "/plb/opb/serial@50001000"; - }; -}; diff --git a/arch/powerpc/boot/dts/makalu.dts b/arch/powerpc/boot/dts/makalu.dts deleted file mode 100644 index c473cd911bca..000000000000 --- a/arch/powerpc/boot/dts/makalu.dts +++ /dev/null @@ -1,353 +0,0 @@ -/* - * Device Tree Source for AMCC Makalu (405EX) - * - * Copyright 2007 DENX Software Engineering, Stefan Roese <sr@denx.de> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without - * any warranty of any kind, whether express or implied. - */ - -/dts-v1/; - -/ { - #address-cells = <1>; - #size-cells = <1>; - model = "amcc,makalu"; - compatible = "amcc,makalu"; - dcr-parent = <&{/cpus/cpu@0}>; - - aliases { - ethernet0 = &EMAC0; - ethernet1 = &EMAC1; - serial0 = &UART0; - serial1 = &UART1; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - model = "PowerPC,405EX"; - reg = <0x00000000>; - clock-frequency = <0>; /* Filled in by U-Boot */ - timebase-frequency = <0>; /* Filled in by U-Boot */ - i-cache-line-size = <32>; - d-cache-line-size = <32>; - i-cache-size = <16384>; /* 16 kB */ - d-cache-size = <16384>; /* 16 kB */ - dcr-controller; - dcr-access-method = "native"; - }; - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */ - }; - - UIC0: interrupt-controller { - compatible = "ibm,uic-405ex", "ibm,uic"; - interrupt-controller; - cell-index = <0>; - dcr-reg = <0x0c0 0x009>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - }; - - UIC1: interrupt-controller1 { - compatible = "ibm,uic-405ex","ibm,uic"; - interrupt-controller; - cell-index = <1>; - dcr-reg = <0x0d0 0x009>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ - interrupt-parent = <&UIC0>; - }; - - UIC2: interrupt-controller2 { - compatible = "ibm,uic-405ex","ibm,uic"; - interrupt-controller; - cell-index = <2>; - dcr-reg = <0x0e0 0x009>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */ - interrupt-parent = <&UIC0>; - }; - - plb { - compatible = "ibm,plb-405ex", "ibm,plb4"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - clock-frequency = <0>; /* Filled in by U-Boot */ - - SDRAM0: memory-controller { - compatible = "ibm,sdram-405ex", "ibm,sdram-4xx-ddr2"; - dcr-reg = <0x010 0x002>; - interrupt-parent = <&UIC2>; - interrupts = <0x5 0x4 /* ECC DED Error */ - 0x6 0x4 /* ECC SEC Error */ >; - }; - - MAL0: mcmal { - compatible = "ibm,mcmal-405ex", "ibm,mcmal2"; - dcr-reg = <0x180 0x062>; - num-tx-chans = <2>; - num-rx-chans = <2>; - interrupt-parent = <&MAL0>; - interrupts = <0x0 0x1 0x2 0x3 0x4>; - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4 - /*RXEOB*/ 0x1 &UIC0 0xb 0x4 - /*SERR*/ 0x2 &UIC1 0x0 0x4 - /*TXDE*/ 0x3 &UIC1 0x1 0x4 - /*RXDE*/ 0x4 &UIC1 0x2 0x4>; - interrupt-map-mask = <0xffffffff>; - }; - - POB0: opb { - compatible = "ibm,opb-405ex", "ibm,opb"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x80000000 0x80000000 0x10000000 - 0xef600000 0xef600000 0x00a00000 - 0xf0000000 0xf0000000 0x10000000>; - dcr-reg = <0x0a0 0x005>; - clock-frequency = <0>; /* Filled in by U-Boot */ - - EBC0: ebc { - compatible = "ibm,ebc-405ex", "ibm,ebc"; - dcr-reg = <0x012 0x002>; - #address-cells = <2>; - #size-cells = <1>; - clock-frequency = <0>; /* Filled in by U-Boot */ - /* ranges property is supplied by U-Boot */ - interrupts = <0x5 0x1>; - interrupt-parent = <&UIC1>; - - nor_flash@0,0 { - compatible = "amd,s29gl512n", "cfi-flash"; - bank-width = <2>; - reg = <0x00000000 0x00000000 0x04000000>; - #address-cells = <1>; - #size-cells = <1>; - partition@0 { - label = "kernel"; - reg = <0x00000000 0x00200000>; - }; - partition@200000 { - label = "root"; - reg = <0x00200000 0x00200000>; - }; - partition@400000 { - label = "user"; - reg = <0x00400000 0x03b60000>; - }; - partition@3f60000 { - label = "env"; - reg = <0x03f60000 0x00040000>; - }; - partition@3fa0000 { - label = "u-boot"; - reg = <0x03fa0000 0x00060000>; - }; - }; - }; - - UART0: serial@ef600200 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0xef600200 0x00000008>; - virtual-reg = <0xef600200>; - clock-frequency = <0>; /* Filled in by U-Boot */ - current-speed = <0>; - interrupt-parent = <&UIC0>; - interrupts = <0x1a 0x4>; - }; - - UART1: serial@ef600300 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0xef600300 0x00000008>; - virtual-reg = <0xef600300>; - clock-frequency = <0>; /* Filled in by U-Boot */ - current-speed = <0>; - interrupt-parent = <&UIC0>; - interrupts = <0x1 0x4>; - }; - - IIC0: i2c@ef600400 { - compatible = "ibm,iic-405ex", "ibm,iic"; - reg = <0xef600400 0x00000014>; - interrupt-parent = <&UIC0>; - interrupts = <0x2 0x4>; - }; - - IIC1: i2c@ef600500 { - compatible = "ibm,iic-405ex", "ibm,iic"; - reg = <0xef600500 0x00000014>; - interrupt-parent = <&UIC0>; - interrupts = <0x7 0x4>; - }; - - - RGMII0: emac-rgmii@ef600b00 { - compatible = "ibm,rgmii-405ex", "ibm,rgmii"; - reg = <0xef600b00 0x00000104>; - has-mdio; - }; - - EMAC0: ethernet@ef600900 { - linux,network-index = <0x0>; - device_type = "network"; - compatible = "ibm,emac-405ex", "ibm,emac4sync"; - interrupt-parent = <&EMAC0>; - interrupts = <0x0 0x1>; - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4 - /*Wake*/ 0x1 &UIC1 0x1d 0x4>; - reg = <0xef600900 0x000000c4>; - local-mac-address = [000000000000]; /* Filled in by U-Boot */ - mal-device = <&MAL0>; - mal-tx-channel = <0>; - mal-rx-channel = <0>; - cell-index = <0>; - max-frame-size = <9000>; - rx-fifo-size = <4096>; - tx-fifo-size = <2048>; - rx-fifo-size-gige = <16384>; - tx-fifo-size-gige = <16384>; - phy-mode = "rgmii"; - phy-map = <0x0000003f>; /* Start at 6 */ - rgmii-device = <&RGMII0>; - rgmii-channel = <0>; - has-inverted-stacr-oc; - has-new-stacr-staopc; - }; - - EMAC1: ethernet@ef600a00 { - linux,network-index = <0x1>; - device_type = "network"; - compatible = "ibm,emac-405ex", "ibm,emac4sync"; - interrupt-parent = <&EMAC1>; - interrupts = <0x0 0x1>; - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4 - /*Wake*/ 0x1 &UIC1 0x1f 0x4>; - reg = <0xef600a00 0x000000c4>; - local-mac-address = [000000000000]; /* Filled in by U-Boot */ - mal-device = <&MAL0>; - mal-tx-channel = <1>; - mal-rx-channel = <1>; - cell-index = <1>; - max-frame-size = <9000>; - rx-fifo-size = <4096>; - tx-fifo-size = <2048>; - rx-fifo-size-gige = <16384>; - tx-fifo-size-gige = <16384>; - phy-mode = "rgmii"; - phy-map = <0x00000000>; - rgmii-device = <&RGMII0>; - rgmii-channel = <1>; - has-inverted-stacr-oc; - has-new-stacr-staopc; - }; - }; - - PCIE0: pcie@a0000000 { - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex"; - primary; - port = <0x0>; /* port number */ - reg = <0xa0000000 0x20000000 /* Config space access */ - 0xef000000 0x00001000>; /* Registers */ - dcr-reg = <0x040 0x020>; - sdr-base = <0x400>; - - /* Outbound ranges, one memory and one IO, - * later cannot be changed - */ - ranges = <0x02000000 0x00000000 0x80000000 0x90000000 0x00000000 0x08000000 - 0x01000000 0x00000000 0x00000000 0xe0000000 0x00000000 0x00010000>; - - /* Inbound 2GB range starting at 0 */ - dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>; - - /* This drives busses 0x00 to 0x3f */ - bus-range = <0x0 0x3f>; - - /* Legacy interrupts (note the weird polarity, the bridge seems - * to invert PCIe legacy interrupts). - * We are de-swizzling here because the numbers are actually for - * port of the root complex virtual P2P bridge. But I want - * to avoid putting a node for it in the tree, so the numbers - * below are basically de-swizzled numbers. - * The real slot is on idsel 0, so the swizzling is 1:1 - */ - interrupt-map-mask = <0x0 0x0 0x0 0x7>; - interrupt-map = < - 0x0 0x0 0x0 0x1 &UIC2 0x0 0x4 /* swizzled int A */ - 0x0 0x0 0x0 0x2 &UIC2 0x1 0x4 /* swizzled int B */ - 0x0 0x0 0x0 0x3 &UIC2 0x2 0x4 /* swizzled int C */ - 0x0 0x0 0x0 0x4 &UIC2 0x3 0x4 /* swizzled int D */>; - }; - - PCIE1: pcie@c0000000 { - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex"; - primary; - port = <0x1>; /* port number */ - reg = <0xc0000000 0x20000000 /* Config space access */ - 0xef001000 0x00001000>; /* Registers */ - dcr-reg = <0x060 0x020>; - sdr-base = <0x440>; - - /* Outbound ranges, one memory and one IO, - * later cannot be changed - */ - ranges = <0x02000000 0x00000000 0x80000000 0x98000000 0x00000000 0x08000000 - 0x01000000 0x00000000 0x00000000 0xe0010000 0x00000000 0x00010000>; - - /* Inbound 2GB range starting at 0 */ - dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>; - - /* This drives busses 0x40 to 0x7f */ - bus-range = <0x40 0x7f>; - - /* Legacy interrupts (note the weird polarity, the bridge seems - * to invert PCIe legacy interrupts). - * We are de-swizzling here because the numbers are actually for - * port of the root complex virtual P2P bridge. But I want - * to avoid putting a node for it in the tree, so the numbers - * below are basically de-swizzled numbers. - * The real slot is on idsel 0, so the swizzling is 1:1 - */ - interrupt-map-mask = <0x0 0x0 0x0 0x7>; - interrupt-map = < - 0x0 0x0 0x0 0x1 &UIC2 0xb 0x4 /* swizzled int A */ - 0x0 0x0 0x0 0x2 &UIC2 0xc 0x4 /* swizzled int B */ - 0x0 0x0 0x0 0x3 &UIC2 0xd 0x4 /* swizzled int C */ - 0x0 0x0 0x0 0x4 &UIC2 0xe 0x4 /* swizzled int D */>; - }; - }; -}; diff --git a/arch/powerpc/boot/dts/obs600.dts b/arch/powerpc/boot/dts/obs600.dts deleted file mode 100644 index d10b0411809b..000000000000 --- a/arch/powerpc/boot/dts/obs600.dts +++ /dev/null @@ -1,314 +0,0 @@ -/* - * Device Tree Source for PlatHome OpenBlockS 600 (405EX) - * - * Copyright 2011 Ben Herrenschmidt, IBM Corp. - * - * Based on Kilauea by: - * - * Copyright 2007-2009 DENX Software Engineering, Stefan Roese <sr@denx.de> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without - * any warranty of any kind, whether express or implied. - */ - -/dts-v1/; - -/ { - #address-cells = <1>; - #size-cells = <1>; - model = "PlatHome,OpenBlockS 600"; - compatible = "plathome,obs600"; - dcr-parent = <&{/cpus/cpu@0}>; - - aliases { - ethernet0 = &EMAC0; - ethernet1 = &EMAC1; - serial0 = &UART0; - serial1 = &UART1; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - model = "PowerPC,405EX"; - reg = <0x00000000>; - clock-frequency = <0>; /* Filled in by U-Boot */ - timebase-frequency = <0>; /* Filled in by U-Boot */ - i-cache-line-size = <32>; - d-cache-line-size = <32>; - i-cache-size = <16384>; /* 16 kB */ - d-cache-size = <16384>; /* 16 kB */ - dcr-controller; - dcr-access-method = "native"; - }; - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */ - }; - - UIC0: interrupt-controller { - compatible = "ibm,uic-405ex", "ibm,uic"; - interrupt-controller; - cell-index = <0>; - dcr-reg = <0x0c0 0x009>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - }; - - UIC1: interrupt-controller1 { - compatible = "ibm,uic-405ex","ibm,uic"; - interrupt-controller; - cell-index = <1>; - dcr-reg = <0x0d0 0x009>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ - interrupt-parent = <&UIC0>; - }; - - UIC2: interrupt-controller2 { - compatible = "ibm,uic-405ex","ibm,uic"; - interrupt-controller; - cell-index = <2>; - dcr-reg = <0x0e0 0x009>; - #address-cells = <0>; - #size-cells = <0>; - #interrupt-cells = <2>; - interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */ - interrupt-parent = <&UIC0>; - }; - - CPM0: cpm { - compatible = "ibm,cpm"; - dcr-access-method = "native"; - dcr-reg = <0x0b0 0x003>; - unused-units = <0x00000000>; - idle-doze = <0x02000000>; - standby = <0xe3e74800>; - }; - - plb { - compatible = "ibm,plb-405ex", "ibm,plb4"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - clock-frequency = <0>; /* Filled in by U-Boot */ - - SDRAM0: memory-controller { - compatible = "ibm,sdram-405ex", "ibm,sdram-4xx-ddr2"; - dcr-reg = <0x010 0x002>; - interrupt-parent = <&UIC2>; - interrupts = <0x5 0x4 /* ECC DED Error */ - 0x6 0x4>; /* ECC SEC Error */ - }; - - CRYPTO: crypto@ef700000 { - compatible = "amcc,ppc405ex-crypto", "amcc,ppc4xx-crypto"; - reg = <0xef700000 0x80400>; - interrupt-parent = <&UIC0>; - interrupts = <0x17 0x2>; - }; - - MAL0: mcmal { - compatible = "ibm,mcmal-405ex", "ibm,mcmal2"; - dcr-reg = <0x180 0x062>; - num-tx-chans = <2>; - num-rx-chans = <2>; - interrupt-parent = <&MAL0>; - interrupts = <0x0 0x1 0x2 0x3 0x4>; - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4 - /*RXEOB*/ 0x1 &UIC0 0xb 0x4 - /*SERR*/ 0x2 &UIC1 0x0 0x4 - /*TXDE*/ 0x3 &UIC1 0x1 0x4 - /*RXDE*/ 0x4 &UIC1 0x2 0x4>; - interrupt-map-mask = <0xffffffff>; - }; - - POB0: opb { - compatible = "ibm,opb-405ex", "ibm,opb"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x80000000 0x80000000 0x10000000 - 0xef600000 0xef600000 0x00a00000 - 0xf0000000 0xf0000000 0x10000000>; - dcr-reg = <0x0a0 0x005>; - clock-frequency = <0>; /* Filled in by U-Boot */ - - EBC0: ebc { - compatible = "ibm,ebc-405ex", "ibm,ebc"; - dcr-reg = <0x012 0x002>; - #address-cells = <2>; - #size-cells = <1>; - clock-frequency = <0>; /* Filled in by U-Boot */ - /* ranges property is supplied by U-Boot */ - interrupts = <0x5 0x1>; - interrupt-parent = <&UIC1>; - - nor_flash@0,0 { - compatible = "amd,s29gl512n", "cfi-flash"; - bank-width = <2>; - reg = <0x00000000 0x00000000 0x08000000>; - #address-cells = <1>; - #size-cells = <1>; - partition@0 { - label = "kernel + initrd"; - reg = <0x00000000 0x03de0000>; - }; - partition@3de0000 { - label = "user config area"; - reg = <0x03de0000 0x00080000>; - }; - partition@3e60000 { - label = "user program area"; - reg = <0x03e60000 0x04000000>; - }; - partition@7e60000 { - label = "flat device tree"; - reg = <0x07e60000 0x00080000>; - }; - partition@7ee0000 { - label = "test program"; - reg = <0x07ee0000 0x00080000>; - }; - partition@7f60000 { - label = "u-boot env"; - reg = <0x07f60000 0x00040000>; - }; - partition@7fa0000 { - label = "u-boot"; - reg = <0x07fa0000 0x00060000>; - }; - }; - }; - - UART0: serial@ef600200 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0xef600200 0x00000008>; - virtual-reg = <0xef600200>; - clock-frequency = <0>; /* Filled in by U-Boot */ - current-speed = <0>; - interrupt-parent = <&UIC0>; - interrupts = <0x1a 0x4>; - }; - - UART1: serial@ef600300 { - device_type = "serial"; - compatible = "ns16550"; - reg = <0xef600300 0x00000008>; - virtual-reg = <0xef600300>; - clock-frequency = <0>; /* Filled in by U-Boot */ - current-speed = <0>; - interrupt-parent = <&UIC0>; - interrupts = <0x1 0x4>; - }; - - IIC0: i2c@ef600400 { - compatible = "ibm,iic-405ex", "ibm,iic"; - reg = <0xef600400 0x00000014>; - interrupt-parent = <&UIC0>; - interrupts = <0x2 0x4>; - #address-cells = <1>; - #size-cells = <0>; - - rtc@68 { - compatible = "dallas,ds1340"; - reg = <0x68>; - }; - }; - - IIC1: i2c@ef600500 { - compatible = "ibm,iic-405ex", "ibm,iic"; - reg = <0xef600500 0x00000014>; - interrupt-parent = <&UIC0>; - interrupts = <0x7 0x4>; - }; - - RGMII0: emac-rgmii@ef600b00 { - compatible = "ibm,rgmii-405ex", "ibm,rgmii"; - reg = <0xef600b00 0x00000104>; - has-mdio; - }; - - EMAC0: ethernet@ef600900 { - linux,network-index = <0x0>; - device_type = "network"; - compatible = "ibm,emac-405ex", "ibm,emac4sync"; - interrupt-parent = <&EMAC0>; - interrupts = <0x0 0x1>; - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4 - /*Wake*/ 0x1 &UIC1 0x1d 0x4>; - reg = <0xef600900 0x000000c4>; - local-mac-address = [000000000000]; /* Filled in by U-Boot */ - mal-device = <&MAL0>; - mal-tx-channel = <0>; - mal-rx-channel = <0>; - cell-index = <0>; - max-frame-size = <9000>; - rx-fifo-size = <4096>; - tx-fifo-size = <2048>; - rx-fifo-size-gige = <16384>; - tx-fifo-size-gige = <16384>; - phy-mode = "rgmii"; - phy-map = <0x00000000>; - rgmii-device = <&RGMII0>; - rgmii-channel = <0>; - has-inverted-stacr-oc; - has-new-stacr-staopc; - }; - - EMAC1: ethernet@ef600a00 { - linux,network-index = <0x1>; - device_type = "network"; - compatible = "ibm,emac-405ex", "ibm,emac4sync"; - interrupt-parent = <&EMAC1>; - interrupts = <0x0 0x1>; - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4 - /*Wake*/ 0x1 &UIC1 0x1f 0x4>; - reg = <0xef600a00 0x000000c4>; - local-mac-address = [000000000000]; /* Filled in by U-Boot */ - mal-device = <&MAL0>; - mal-tx-channel = <1>; - mal-rx-channel = <1>; - cell-index = <1>; - max-frame-size = <9000>; - rx-fifo-size = <4096>; - tx-fifo-size = <2048>; - rx-fifo-size-gige = <16384>; - tx-fifo-size-gige = <16384>; - phy-mode = "rgmii"; - phy-map = <0x00000000>; - rgmii-device = <&RGMII0>; - rgmii-channel = <1>; - has-inverted-stacr-oc; - has-new-stacr-staopc; - }; - - GPIO: gpio@ef600800 { - device_type = "gpio"; - compatible = "ibm,gpio-405ex", "ibm,ppc4xx-gpio"; - reg = <0xef600800 0x50>; - }; - }; - }; - chosen { - stdout-path = "/plb/opb/serial@ef600200"; - }; -}; |