diff options
Diffstat (limited to 'arch/powerpc/kernel/exceptions-64s.S')
| -rw-r--r-- | arch/powerpc/kernel/exceptions-64s.S | 63 |
1 files changed, 63 insertions, 0 deletions
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index 4545b7a28aad..6fe7d7926370 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -111,6 +111,8 @@ name: #define IAREA .L_IAREA_\name\() /* PACA save area */ #define IVIRT .L_IVIRT_\name\() /* Has virt mode entry point */ #define IISIDE .L_IISIDE_\name\() /* Uses SRR0/1 not DAR/DSISR */ +#define ICFAR .L_ICFAR_\name\() /* Uses CFAR */ +#define ICFAR_IF_HVMODE .L_ICFAR_IF_HVMODE_\name\() /* Uses CFAR if HV */ #define IDAR .L_IDAR_\name\() /* Uses DAR (or SRR0) */ #define IDSISR .L_IDSISR_\name\() /* Uses DSISR (or SRR1) */ #define IBRANCH_TO_COMMON .L_IBRANCH_TO_COMMON_\name\() /* ENTRY branch to common */ @@ -150,6 +152,12 @@ do_define_int n .ifndef IISIDE IISIDE=0 .endif + .ifndef ICFAR + ICFAR=1 + .endif + .ifndef ICFAR_IF_HVMODE + ICFAR_IF_HVMODE=0 + .endif .ifndef IDAR IDAR=0 .endif @@ -287,9 +295,21 @@ BEGIN_FTR_SECTION END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR) HMT_MEDIUM std r10,IAREA+EX_R10(r13) /* save r10 - r12 */ + .if ICFAR BEGIN_FTR_SECTION mfspr r10,SPRN_CFAR END_FTR_SECTION_IFSET(CPU_FTR_CFAR) + .elseif ICFAR_IF_HVMODE +BEGIN_FTR_SECTION + BEGIN_FTR_SECTION_NESTED(69) + mfspr r10,SPRN_CFAR + END_FTR_SECTION_NESTED(CPU_FTR_CFAR, CPU_FTR_CFAR, 69) +FTR_SECTION_ELSE + BEGIN_FTR_SECTION_NESTED(69) + li r10,0 + END_FTR_SECTION_NESTED(CPU_FTR_CFAR, CPU_FTR_CFAR, 69) +ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206) + .endif .if \ool .if !\virt b tramp_real_\name @@ -305,9 +325,11 @@ END_FTR_SECTION_IFSET(CPU_FTR_CFAR) BEGIN_FTR_SECTION std r9,IAREA+EX_PPR(r13) END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR) + .if ICFAR || ICFAR_IF_HVMODE BEGIN_FTR_SECTION std r10,IAREA+EX_CFAR(r13) END_FTR_SECTION_IFSET(CPU_FTR_CFAR) + .endif INTERRUPT_TO_KERNEL mfctr r10 std r10,IAREA+EX_CTR(r13) @@ -559,7 +581,11 @@ END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR) .endif BEGIN_FTR_SECTION + .if ICFAR || ICFAR_IF_HVMODE ld r10,IAREA+EX_CFAR(r13) + .else + li r10,0 + .endif std r10,ORIG_GPR3(r1) END_FTR_SECTION_IFSET(CPU_FTR_CFAR) ld r10,IAREA+EX_CTR(r13) @@ -1520,6 +1546,12 @@ ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX) * * If soft masked, the masked handler will note the pending interrupt for * replay, and clear MSR[EE] in the interrupted context. + * + * CFAR is not required because this is an asynchronous interrupt that in + * general won't have much bearing on the state of the CPU, with the possible + * exception of crash/debug IPIs, but those are generally moving to use SRESET + * IPIs. Unless this is an HV interrupt and KVM HV is possible, in which case + * it may be exiting the guest and need CFAR to be saved. */ INT_DEFINE_BEGIN(hardware_interrupt) IVEC=0x500 @@ -1527,6 +1559,10 @@ INT_DEFINE_BEGIN(hardware_interrupt) IMASK=IRQS_DISABLED IKVM_REAL=1 IKVM_VIRT=1 + ICFAR=0 +#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE + ICFAR_IF_HVMODE=1 +#endif INT_DEFINE_END(hardware_interrupt) EXC_REAL_BEGIN(hardware_interrupt, 0x500, 0x100) @@ -1748,6 +1784,10 @@ END_FTR_SECTION_IFSET(CPU_FTR_TM) * If PPC_WATCHDOG is configured, the soft masked handler will actually set * things back up to run soft_nmi_interrupt as a regular interrupt handler * on the emergency stack. + * + * CFAR is not required because this is asynchronous (see hardware_interrupt). + * A watchdog interrupt may like to have CFAR, but usually the interesting + * branch is long gone by that point (e.g., infinite loop). */ INT_DEFINE_BEGIN(decrementer) IVEC=0x900 @@ -1755,6 +1795,7 @@ INT_DEFINE_BEGIN(decrementer) #ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE IKVM_REAL=1 #endif + ICFAR=0 INT_DEFINE_END(decrementer) EXC_REAL_BEGIN(decrementer, 0x900, 0x80) @@ -1830,6 +1871,8 @@ EXC_COMMON_BEGIN(hdecrementer_common) * If soft masked, the masked handler will note the pending interrupt for * replay, leaving MSR[EE] enabled in the interrupted context because the * doorbells are edge triggered. + * + * CFAR is not required, similarly to hardware_interrupt. */ INT_DEFINE_BEGIN(doorbell_super) IVEC=0xa00 @@ -1837,6 +1880,7 @@ INT_DEFINE_BEGIN(doorbell_super) #ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE IKVM_REAL=1 #endif + ICFAR=0 INT_DEFINE_END(doorbell_super) EXC_REAL_BEGIN(doorbell_super, 0xa00, 0x100) @@ -1888,6 +1932,7 @@ INT_DEFINE_BEGIN(system_call) IVEC=0xc00 IKVM_REAL=1 IKVM_VIRT=1 + ICFAR=0 INT_DEFINE_END(system_call) .macro SYSTEM_CALL virt @@ -2186,6 +2231,11 @@ EXC_COMMON_BEGIN(hmi_exception_common) * Interrupt 0xe80 - Directed Hypervisor Doorbell Interrupt. * This is an asynchronous interrupt in response to a msgsnd doorbell. * Similar to the 0xa00 doorbell but for host rather than guest. + * + * CFAR is not required (similar to doorbell_interrupt), unless KVM HV + * is enabled, in which case it may be a guest exit. Most PowerNV kernels + * include KVM support so it would be nice if this could be dynamically + * patched out if KVM was not currently running any guests. */ INT_DEFINE_BEGIN(h_doorbell) IVEC=0xe80 @@ -2193,6 +2243,9 @@ INT_DEFINE_BEGIN(h_doorbell) IMASK=IRQS_DISABLED IKVM_REAL=1 IKVM_VIRT=1 +#ifndef CONFIG_KVM_BOOK3S_HV_POSSIBLE + ICFAR=0 +#endif INT_DEFINE_END(h_doorbell) EXC_REAL_BEGIN(h_doorbell, 0xe80, 0x20) @@ -2216,6 +2269,9 @@ EXC_COMMON_BEGIN(h_doorbell_common) * Interrupt 0xea0 - Hypervisor Virtualization Interrupt. * This is an asynchronous interrupt in response to an "external exception". * Similar to 0x500 but for host only. + * + * Like h_doorbell, CFAR is only required for KVM HV because this can be + * a guest exit. */ INT_DEFINE_BEGIN(h_virt_irq) IVEC=0xea0 @@ -2223,6 +2279,9 @@ INT_DEFINE_BEGIN(h_virt_irq) IMASK=IRQS_DISABLED IKVM_REAL=1 IKVM_VIRT=1 +#ifndef CONFIG_KVM_BOOK3S_HV_POSSIBLE + ICFAR=0 +#endif INT_DEFINE_END(h_virt_irq) EXC_REAL_BEGIN(h_virt_irq, 0xea0, 0x20) @@ -2259,6 +2318,8 @@ EXC_VIRT_NONE(0x4ee0, 0x20) * * If soft masked, the masked handler will note the pending interrupt for * replay, and clear MSR[EE] in the interrupted context. + * + * CFAR is not used by perf interrupts so not required. */ INT_DEFINE_BEGIN(performance_monitor) IVEC=0xf00 @@ -2266,6 +2327,7 @@ INT_DEFINE_BEGIN(performance_monitor) #ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE IKVM_REAL=1 #endif + ICFAR=0 INT_DEFINE_END(performance_monitor) EXC_REAL_BEGIN(performance_monitor, 0xf00, 0x20) @@ -2690,6 +2752,7 @@ EXC_VIRT_NONE(0x5800, 0x100) INT_DEFINE_BEGIN(soft_nmi) IVEC=0x900 ISTACK=0 + ICFAR=0 INT_DEFINE_END(soft_nmi) /* |