diff options
Diffstat (limited to 'arch/powerpc/kernel/setup-common.c')
| -rw-r--r-- | arch/powerpc/kernel/setup-common.c | 230 |
1 files changed, 128 insertions, 102 deletions
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c index 488f1eecc0de..9b142b9d5187 100644 --- a/arch/powerpc/kernel/setup-common.c +++ b/arch/powerpc/kernel/setup-common.c @@ -9,6 +9,7 @@ #undef DEBUG #include <linux/export.h> +#include <linux/panic_notifier.h> #include <linux/string.h> #include <linux/sched.h> #include <linux/init.h> @@ -17,27 +18,27 @@ #include <linux/delay.h> #include <linux/initrd.h> #include <linux/platform_device.h> +#include <linux/printk.h> #include <linux/seq_file.h> #include <linux/ioport.h> #include <linux/console.h> -#include <linux/screen_info.h> #include <linux/root_dev.h> -#include <linux/notifier.h> #include <linux/cpu.h> #include <linux/unistd.h> +#include <linux/seq_buf.h> #include <linux/serial.h> #include <linux/serial_8250.h> #include <linux/percpu.h> #include <linux/memblock.h> -#include <linux/of_platform.h> +#include <linux/of.h> +#include <linux/of_fdt.h> +#include <linux/of_irq.h> #include <linux/hugetlb.h> -#include <asm/debugfs.h> +#include <linux/pgtable.h> #include <asm/io.h> #include <asm/paca.h> -#include <asm/prom.h> #include <asm/processor.h> #include <asm/vdso_datapage.h> -#include <asm/pgtable.h> #include <asm/smp.h> #include <asm/elf.h> #include <asm/machdep.h> @@ -57,6 +58,7 @@ #include <asm/xmon.h> #include <asm/cputhreads.h> #include <mm/mmu_decl.h> +#include <asm/archrandom.h> #include <asm/fadump.h> #include <asm/udbg.h> #include <asm/hugetlb.h> @@ -64,11 +66,11 @@ #include <asm/mmu_context.h> #include <asm/cpu_has_feature.h> #include <asm/kasan.h> +#include <asm/mce.h> #include "setup.h" #ifdef DEBUG -#include <asm/udbg.h> #define DBG(fmt...) udbg_printf(fmt) #else #define DBG(fmt...) @@ -84,31 +86,16 @@ EXPORT_SYMBOL(machine_id); int boot_cpuid = -1; EXPORT_SYMBOL_GPL(boot_cpuid); +#ifdef CONFIG_PPC64 +int boot_cpu_hwid = -1; +#endif + /* * These are used in binfmt_elf.c to put aux entries on the stack * for each elf executable being started. */ int dcache_bsize; int icache_bsize; -int ucache_bsize; - - -unsigned long klimit = (unsigned long) _end; - -/* - * This still seems to be needed... -- paulus - */ -struct screen_info screen_info = { - .orig_x = 0, - .orig_y = 25, - .orig_video_cols = 80, - .orig_video_lines = 25, - .orig_video_isVGA = 1, - .orig_video_points = 16 -}; -#if defined(CONFIG_FB_VGA16_MODULE) -EXPORT_SYMBOL(screen_info); -#endif /* Variables required to store legacy IO irq routing */ int of_i8042_kbd_irq; @@ -165,9 +152,7 @@ void machine_restart(char *cmd) void machine_power_off(void) { machine_shutdown(); - if (pm_power_off) - pm_power_off(); - + do_kernel_power_off(); smp_send_stop(); machine_hang(); } @@ -177,6 +162,14 @@ EXPORT_SYMBOL_GPL(machine_power_off); void (*pm_power_off)(void); EXPORT_SYMBOL_GPL(pm_power_off); +size_t __must_check arch_get_random_seed_longs(unsigned long *v, size_t max_longs) +{ + if (max_longs && ppc_md.get_random_seed && ppc_md.get_random_seed(v)) + return 1; + return 0; +} +EXPORT_SYMBOL(arch_get_random_seed_longs); + void machine_halt(void) { machine_shutdown(); @@ -239,18 +232,17 @@ static int show_cpuinfo(struct seq_file *m, void *v) maj = (pvr >> 8) & 0xFF; min = pvr & 0xFF; - seq_printf(m, "processor\t: %lu\n", cpu_id); - seq_printf(m, "cpu\t\t: "); + seq_printf(m, "processor\t: %lu\ncpu\t\t: ", cpu_id); if (cur_cpu_spec->pvr_mask && cur_cpu_spec->cpu_name) - seq_printf(m, "%s", cur_cpu_spec->cpu_name); + seq_puts(m, cur_cpu_spec->cpu_name); else seq_printf(m, "unknown (%08x)", pvr); if (cpu_has_feature(CPU_FTR_ALTIVEC)) - seq_printf(m, ", altivec supported"); + seq_puts(m, ", altivec supported"); - seq_printf(m, "\n"); + seq_putc(m, '\n'); #ifdef CONFIG_TAU if (cpu_has_feature(CPU_FTR_TAU)) { @@ -283,11 +275,8 @@ static int show_cpuinfo(struct seq_file *m, void *v) seq_printf(m, "clock\t\t: %lu.%06luMHz\n", proc_freq / 1000000, proc_freq % 1000000); - if (ppc_md.show_percpuinfo != NULL) - ppc_md.show_percpuinfo(m, cpu_id); - /* If we are a Freescale core do a simple check so - * we dont have to keep adding cases in the future */ + * we don't have to keep adding cases in the future */ if (PVR_VER(pvr) & 0x8000) { switch (PVR_VER(pvr)) { case 0x8000: /* 7441/7450/7451, Voyager */ @@ -306,15 +295,12 @@ static int show_cpuinfo(struct seq_file *m, void *v) } } else { switch (PVR_VER(pvr)) { - case 0x0020: /* 403 family */ - maj = PVR_MAJ(pvr) + 1; - min = PVR_MIN(pvr); - break; case 0x1008: /* 740P/750P ?? */ maj = ((pvr >> 8) & 0xFF) - 1; min = pvr & 0xFF; break; case 0x004e: /* POWER9 bits 12-15 give chip type */ + case 0x0080: /* POWER10 bit 12 gives SMT8/4 */ maj = (pvr >> 8) & 0x0F; min = pvr & 0xFF; break; @@ -332,7 +318,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) seq_printf(m, "bogomips\t: %lu.%02lu\n", loops_per_jiffy / (500000 / HZ), (loops_per_jiffy / (5000 / HZ)) % 100); - seq_printf(m, "\n"); + seq_putc(m, '\n'); /* If this is the last cpu, print the summary */ if (cpumask_next(cpu_id, cpu_online_mask) >= nr_cpu_ids) @@ -467,8 +453,8 @@ void __init smp_setup_cpu_maps(void) intserv = of_get_property(dn, "ibm,ppc-interrupt-server#s", &len); if (intserv) { - DBG(" ibm,ppc-interrupt-server#s -> %d threads\n", - nthreads); + DBG(" ibm,ppc-interrupt-server#s -> %lu threads\n", + (len / sizeof(int))); } else { DBG(" no ibm,ppc-interrupt-server#s -> 1 thread\n"); intserv = of_get_property(dn, "reg", &len); @@ -593,7 +579,15 @@ static __init int add_pcspkr(void) device_initcall(add_pcspkr); #endif /* CONFIG_PCSPKR_PLATFORM */ -void probe_machine(void) +static char ppc_hw_desc_buf[128] __initdata; + +struct seq_buf ppc_hw_desc __initdata = { + .buffer = ppc_hw_desc_buf, + .size = sizeof(ppc_hw_desc_buf), + .len = 0, +}; + +static __init void probe_machine(void) { extern struct machdep_calls __machine_desc_start; extern struct machdep_calls __machine_desc_end; @@ -619,13 +613,14 @@ void probe_machine(void) for (machine_id = &__machine_desc_start; machine_id < &__machine_desc_end; machine_id++) { - DBG(" %s ...", machine_id->name); + DBG(" %s ...\n", machine_id->name); + if (machine_id->compatible && !of_machine_is_compatible(machine_id->compatible)) + continue; memcpy(&ppc_md, machine_id, sizeof(struct machdep_calls)); - if (ppc_md.probe()) { - DBG(" match !\n"); - break; - } - DBG("\n"); + if (ppc_md.probe && !ppc_md.probe()) + continue; + DBG(" %s match !\n", machine_id->name); + break; } /* What can we do if we didn't find ? */ if (machine_id >= &__machine_desc_end) { @@ -633,7 +628,13 @@ void probe_machine(void) for (;;); } - printk(KERN_INFO "Using %s machine description\n", ppc_md.name); + // Append the machine name to other info we've gathered + seq_buf_puts(&ppc_hw_desc, ppc_md.name); + + // Set the generic hardware description shown in oopses + dump_stack_set_arch_desc(ppc_hw_desc.buffer); + + pr_info("Hardware name: %s\n", ppc_hw_desc.buffer); } /* Match a class of boards, not a specific device configuration. */ @@ -691,8 +692,25 @@ int check_legacy_ioport(unsigned long base_port) } EXPORT_SYMBOL(check_legacy_ioport); -static int ppc_panic_event(struct notifier_block *this, - unsigned long event, void *ptr) +/* + * Panic notifiers setup + * + * We have 3 notifiers for powerpc, each one from a different "nature": + * + * - ppc_panic_fadump_handler() is a hypervisor notifier, which hard-disables + * IRQs and deal with the Firmware-Assisted dump, when it is configured; + * should run early in the panic path. + * + * - dump_kernel_offset() is an informative notifier, just showing the KASLR + * offset if we have RANDOMIZE_BASE set. + * + * - ppc_panic_platform_handler() is a low-level handler that's registered + * only if the platform wishes to perform final actions in the panic path, + * hence it should run late and might not even return. Currently, only + * pseries and ps3 platforms register callbacks. + */ +static int ppc_panic_fadump_handler(struct notifier_block *this, + unsigned long event, void *ptr) { /* * panic does a local_irq_disable, but we really @@ -702,45 +720,63 @@ static int ppc_panic_event(struct notifier_block *this, /* * If firmware-assisted dump has been registered then trigger - * firmware-assisted dump and let firmware handle everything else. + * its callback and let the firmware handles everything else. */ crash_fadump(NULL, ptr); - if (ppc_md.panic) - ppc_md.panic(ptr); /* May not return */ + return NOTIFY_DONE; } -static struct notifier_block ppc_panic_block = { - .notifier_call = ppc_panic_event, - .priority = INT_MIN /* may not return; must be done last */ -}; - -/* - * Dump out kernel offset information on panic. - */ static int dump_kernel_offset(struct notifier_block *self, unsigned long v, void *p) { pr_emerg("Kernel Offset: 0x%lx from 0x%lx\n", kaslr_offset(), KERNELBASE); - return 0; + return NOTIFY_DONE; } +static int ppc_panic_platform_handler(struct notifier_block *this, + unsigned long event, void *ptr) +{ + /* + * This handler is only registered if we have a panic callback + * on ppc_md, hence NULL check is not needed. + * Also, it may not return, so it runs really late on panic path. + */ + ppc_md.panic(ptr); + + return NOTIFY_DONE; +} + +static struct notifier_block ppc_fadump_block = { + .notifier_call = ppc_panic_fadump_handler, + .priority = INT_MAX, /* run early, to notify the firmware ASAP */ +}; + static struct notifier_block kernel_offset_notifier = { - .notifier_call = dump_kernel_offset + .notifier_call = dump_kernel_offset, +}; + +static struct notifier_block ppc_panic_block = { + .notifier_call = ppc_panic_platform_handler, + .priority = INT_MIN, /* may not return; must be done last */ }; void __init setup_panic(void) { + /* Hard-disables IRQs + deal with FW-assisted dump (fadump) */ + atomic_notifier_chain_register(&panic_notifier_list, + &ppc_fadump_block); + if (IS_ENABLED(CONFIG_RANDOMIZE_BASE) && kaslr_offset() > 0) atomic_notifier_chain_register(&panic_notifier_list, &kernel_offset_notifier); - /* PPC64 always does a hard irq disable in its panic handler */ - if (!IS_ENABLED(CONFIG_PPC64) && !ppc_md.panic) - return; - atomic_notifier_chain_register(&panic_notifier_list, &ppc_panic_block); + /* Low-level platform-specific routines that should run on panic */ + if (ppc_md.panic) + atomic_notifier_chain_register(&panic_notifier_list, + &ppc_panic_block); } #ifdef CONFIG_CHECK_CACHE_COHERENCY @@ -780,19 +816,6 @@ static int __init check_cache_coherency(void) late_initcall(check_cache_coherency); #endif /* CONFIG_CHECK_CACHE_COHERENCY */ -#ifdef CONFIG_DEBUG_FS -struct dentry *powerpc_debugfs_root; -EXPORT_SYMBOL(powerpc_debugfs_root); - -static int powerpc_debugfs_init(void) -{ - powerpc_debugfs_root = debugfs_create_dir("powerpc", NULL); - - return powerpc_debugfs_root == NULL; -} -arch_initcall(powerpc_debugfs_init); -#endif - void ppc_printk_progress(char *s, unsigned short hex) { pr_info("%s\n", s); @@ -806,8 +829,6 @@ static __init void print_system_info(void) pr_info("dcache_bsize = 0x%x\n", dcache_bsize); pr_info("icache_bsize = 0x%x\n", icache_bsize); - if (ucache_bsize != 0) - pr_info("ucache_bsize = 0x%x\n", ucache_bsize); pr_info("cpu_features = 0x%016lx\n", cur_cpu_spec->cpu_features); pr_info(" possible = 0x%016lx\n", @@ -837,7 +858,7 @@ static __init void print_system_info(void) } #ifdef CONFIG_SMP -static void smp_setup_pacas(void) +static void __init smp_setup_pacas(void) { int cpu; @@ -848,7 +869,7 @@ static void smp_setup_pacas(void) set_hard_smp_processor_id(cpu, cpu_to_phys_id[cpu]); } - memblock_free(__pa(cpu_to_phys_id), nr_cpu_ids * sizeof(u32)); + memblock_free(cpu_to_phys_id, nr_cpu_ids * sizeof(u32)); cpu_to_phys_id = NULL; } #endif @@ -910,6 +931,8 @@ void __init setup_arch(char **cmdline_p) /* Parse memory topology */ mem_topology_setup(); + /* Set max_mapnr before paging_init() */ + set_max_mapnr(max_pfn); /* * Release secondary cpus out of their spinloops at 0x60 now that @@ -923,34 +946,37 @@ void __init setup_arch(char **cmdline_p) /* On BookE, setup per-core TLB data structures. */ setup_tlb_core_data(); - - smp_release_cpus(); #endif /* Print various info about the machine that has been gathered so far. */ print_system_info(); - /* Reserve large chunks of memory for use by CMA for KVM. */ - kvm_cma_reserve(); - klp_init_thread_info(&init_task); - init_mm.start_code = (unsigned long)_stext; - init_mm.end_code = (unsigned long) _etext; - init_mm.end_data = (unsigned long) _edata; - init_mm.brk = klimit; - + setup_initial_init_mm(_stext, _etext, _edata, _end); + /* sched_init() does the mmgrab(&init_mm) for the primary CPU */ + VM_WARN_ON(cpumask_test_cpu(smp_processor_id(), mm_cpumask(&init_mm))); + cpumask_set_cpu(smp_processor_id(), mm_cpumask(&init_mm)); + inc_mm_active_cpus(&init_mm); mm_iommu_init(&init_mm); + irqstack_early_init(); exc_lvl_early_init(); emergency_stack_init(); + mce_init(); + smp_release_cpus(); + initmem_init(); - early_memtest(min_low_pfn << PAGE_SHIFT, max_low_pfn << PAGE_SHIFT); + /* + * Reserve large chunks of memory for use by CMA for KVM and hugetlb. These must + * be called after initmem_init(), so that pageblock_order is initialised. + */ + kvm_cma_reserve(); + gigantic_hugetlb_cma_reserve(); - if (IS_ENABLED(CONFIG_DUMMY_CONSOLE)) - conswitchp = &dummy_con; + early_memtest(min_low_pfn << PAGE_SHIFT, max_low_pfn << PAGE_SHIFT); if (ppc_md.setup_arch) ppc_md.setup_arch(); |