summaryrefslogtreecommitdiff
path: root/arch/powerpc/mm/tlb_nohash.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/mm/tlb_nohash.c')
-rw-r--r--arch/powerpc/mm/tlb_nohash.c111
1 files changed, 66 insertions, 45 deletions
diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c
index 92cb18d52ea8..f38ea4df6a85 100644
--- a/arch/powerpc/mm/tlb_nohash.c
+++ b/arch/powerpc/mm/tlb_nohash.c
@@ -581,42 +581,10 @@ static void setup_mmu_htw(void)
/*
* Early initialization of the MMU TLB code
*/
-static void __early_init_mmu(int boot_cpu)
+static void early_init_this_mmu(void)
{
unsigned int mas4;
- /* XXX This will have to be decided at runtime, but right
- * now our boot and TLB miss code hard wires it. Ideally
- * we should find out a suitable page size and patch the
- * TLB miss code (either that or use the PACA to store
- * the value we want)
- */
- mmu_linear_psize = MMU_PAGE_1G;
-
- /* XXX This should be decided at runtime based on supported
- * page sizes in the TLB, but for now let's assume 16M is
- * always there and a good fit (which it probably is)
- *
- * Freescale booke only supports 4K pages in TLB0, so use that.
- */
- if (mmu_has_feature(MMU_FTR_TYPE_FSL_E))
- mmu_vmemmap_psize = MMU_PAGE_4K;
- else
- mmu_vmemmap_psize = MMU_PAGE_16M;
-
- /* XXX This code only checks for TLB 0 capabilities and doesn't
- * check what page size combos are supported by the HW. It
- * also doesn't handle the case where a separate array holds
- * the IND entries from the array loaded by the PT.
- */
- if (boot_cpu) {
- /* Look for supported page sizes */
- setup_page_sizes();
-
- /* Look for HW tablewalk support */
- setup_mmu_htw();
- }
-
/* Set MAS4 based on page table setting */
mas4 = 0x4 << MAS4_WIMGED_SHIFT;
@@ -650,11 +618,6 @@ static void __early_init_mmu(int boot_cpu)
}
mtspr(SPRN_MAS4, mas4);
- /* Set the global containing the top of the linear mapping
- * for use by the TLB miss code
- */
- linear_map_top = memblock_end_of_DRAM();
-
#ifdef CONFIG_PPC_FSL_BOOK3E
if (mmu_has_feature(MMU_FTR_TYPE_FSL_E)) {
unsigned int num_cams;
@@ -662,10 +625,49 @@ static void __early_init_mmu(int boot_cpu)
/* use a quarter of the TLBCAM for bolted linear map */
num_cams = (mfspr(SPRN_TLB1CFG) & TLBnCFG_N_ENTRY) / 4;
linear_map_top = map_mem_in_cams(linear_map_top, num_cams);
+ }
+#endif
- /* limit memory so we dont have linear faults */
- memblock_enforce_memory_limit(linear_map_top);
+ /* A sync won't hurt us after mucking around with
+ * the MMU configuration
+ */
+ mb();
+}
+static void __init early_init_mmu_global(void)
+{
+ /* XXX This will have to be decided at runtime, but right
+ * now our boot and TLB miss code hard wires it. Ideally
+ * we should find out a suitable page size and patch the
+ * TLB miss code (either that or use the PACA to store
+ * the value we want)
+ */
+ mmu_linear_psize = MMU_PAGE_1G;
+
+ /* XXX This should be decided at runtime based on supported
+ * page sizes in the TLB, but for now let's assume 16M is
+ * always there and a good fit (which it probably is)
+ *
+ * Freescale booke only supports 4K pages in TLB0, so use that.
+ */
+ if (mmu_has_feature(MMU_FTR_TYPE_FSL_E))
+ mmu_vmemmap_psize = MMU_PAGE_4K;
+ else
+ mmu_vmemmap_psize = MMU_PAGE_16M;
+
+ /* XXX This code only checks for TLB 0 capabilities and doesn't
+ * check what page size combos are supported by the HW. It
+ * also doesn't handle the case where a separate array holds
+ * the IND entries from the array loaded by the PT.
+ */
+ /* Look for supported page sizes */
+ setup_page_sizes();
+
+ /* Look for HW tablewalk support */
+ setup_mmu_htw();
+
+#ifdef CONFIG_PPC_FSL_BOOK3E
+ if (mmu_has_feature(MMU_FTR_TYPE_FSL_E)) {
if (book3e_htw_mode == PPC_HTW_NONE) {
extlb_level_exc = EX_TLB_SIZE;
patch_exception(0x1c0, exc_data_tlb_miss_bolted_book3e);
@@ -675,22 +677,41 @@ static void __early_init_mmu(int boot_cpu)
}
#endif
- /* A sync won't hurt us after mucking around with
- * the MMU configuration
+ /* Set the global containing the top of the linear mapping
+ * for use by the TLB miss code
*/
- mb();
+ linear_map_top = memblock_end_of_DRAM();
+}
+
+static void __init early_mmu_set_memory_limit(void)
+{
+#ifdef CONFIG_PPC_FSL_BOOK3E
+ if (mmu_has_feature(MMU_FTR_TYPE_FSL_E)) {
+ /*
+ * Limit memory so we dont have linear faults.
+ * Unlike memblock_set_current_limit, which limits
+ * memory available during early boot, this permanently
+ * reduces the memory available to Linux. We need to
+ * do this because highmem is not supported on 64-bit.
+ */
+ memblock_enforce_memory_limit(linear_map_top);
+ }
+#endif
memblock_set_current_limit(linear_map_top);
}
+/* boot cpu only */
void __init early_init_mmu(void)
{
- __early_init_mmu(1);
+ early_init_mmu_global();
+ early_init_this_mmu();
+ early_mmu_set_memory_limit();
}
void early_init_mmu_secondary(void)
{
- __early_init_mmu(0);
+ early_init_this_mmu();
}
void setup_initial_memory_limit(phys_addr_t first_memblock_base,