diff options
Diffstat (limited to 'arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts')
-rw-r--r-- | arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts | 219 |
1 files changed, 219 insertions, 0 deletions
diff --git a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts new file mode 100644 index 000000000000..222a39d90f85 --- /dev/null +++ b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts @@ -0,0 +1,219 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* Copyright (c) 2020-2021 Microchip Technology Inc */ + +/dts-v1/; + +#include "mpfs.dtsi" +#include "mpfs-icicle-kit-fabric.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "Microchip PolarFire-SoC Icicle Kit"; + compatible = "microchip,mpfs-icicle-reference-rtlv2210", "microchip,mpfs-icicle-kit", + "microchip,mpfs"; + + aliases { + ethernet0 = &mac1; + serial0 = &mmuart0; + serial1 = &mmuart1; + serial2 = &mmuart2; + serial3 = &mmuart3; + serial4 = &mmuart4; + }; + + chosen { + stdout-path = "serial1:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + led-1 { + gpios = <&gpio2 16 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_RED>; + label = "led1"; + }; + + led-2 { + gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_RED>; + label = "led2"; + }; + + led-3 { + gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_AMBER>; + label = "led3"; + }; + + led-4 { + gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_AMBER>; + label = "led4"; + }; + }; + + ddrc_cache_lo: memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x40000000>; + status = "okay"; + }; + + ddrc_cache_hi: memory@1040000000 { + device_type = "memory"; + reg = <0x10 0x40000000 0x0 0x40000000>; + status = "okay"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hss_payload: region@BFC00000 { + reg = <0x0 0xBFC00000 0x0 0x400000>; + no-map; + }; + }; +}; + +&core_pwm0 { + status = "okay"; +}; + +&gpio2 { + interrupts = <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&mac0 { + phy-mode = "sgmii"; + phy-handle = <&phy0>; + status = "okay"; +}; + +&mac1 { + phy-mode = "sgmii"; + phy-handle = <&phy1>; + status = "okay"; + + phy1: ethernet-phy@9 { + reg = <9>; + }; + + phy0: ethernet-phy@8 { + reg = <8>; + }; +}; + +&mbox { + status = "okay"; +}; + +&mmc { + bus-width = <4>; + disable-wp; + cap-sd-highspeed; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + status = "okay"; +}; + +&mmuart1 { + status = "okay"; +}; + +&mmuart2 { + status = "okay"; +}; + +&mmuart3 { + status = "okay"; +}; + +&mmuart4 { + status = "okay"; +}; + +&pcie { + status = "okay"; +}; + +&qspi { + status = "okay"; +}; + +&refclk { + clock-frequency = <125000000>; +}; + +&refclk_ccc { + clock-frequency = <50000000>; +}; + +&rtc { + status = "okay"; +}; + +&spi0 { + status = "okay"; +}; + +&spi1 { + status = "okay"; +}; + +&syscontroller { + status = "okay"; +}; + +&syscontroller_qspi { + /* + * The flash *is* there, but Icicle kits that have engineering sample + * silicon (write?) access to this flash to non-functional. The system + * controller itself can actually access it, but the MSS cannot write + * an image there. Instantiating a coreQSPI in the fabric & connecting + * it to the flash instead should work though. Pre-production or later + * silicon does not have this issue. + */ + status = "disabled"; + + sys_ctrl_flash: flash@0 { // MT25QL01GBBB8ESF-0SIT + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <20000000>; + spi-rx-bus-width = <1>; + reg = <0>; + }; +}; + +&usb { + status = "okay"; + dr_mode = "host"; +}; |