1 files changed, 104 insertions, 0 deletions
diff --git a/arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts b/arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts
index 49b4b9c2c101..be596d01ff8d 100644
--- a/arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts
+++ b/arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts
@@ -5,6 +5,9 @@
 
 #include "sg2042.dtsi"
 
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
 / {
 	model = "Milk-V Pioneer";
 	compatible = "milkv,pioneer", "sophgo,sg2042";
@@ -12,8 +15,109 @@
 	chosen {
 		stdout-path = "serial0";
 	};
+
+	gpio-power {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power Key";
+			linux,code = <KEY_POWER>;
+			gpios = <&port0a 22 GPIO_ACTIVE_HIGH>;
+			linux,input-type = <EV_KEY>;
+			debounce-interval = <100>;
+		};
+	};
+};
+
+&cgi_main {
+	clock-frequency = <25000000>;
+};
+
+&cgi_dpll0 {
+	clock-frequency = <25000000>;
+};
+
+&cgi_dpll1 {
+	clock-frequency = <25000000>;
+};
+
+&emmc {
+	bus-width = <4>;
+	no-sdio;
+	no-sd;
+	non-removable;
+	wp-inverted;
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	mcu: syscon@17 {
+		compatible = "sophgo,sg2042-hwmon-mcu";
+		reg = <0x17>;
+		#thermal-sensor-cells = <1>;
+	};
+};
+
+&sd {
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+	wp-inverted;
+	status = "okay";
 };
 
 &uart0 {
 	status = "okay";
 };
+
+/ {
+	thermal-zones {
+		soc-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <1000>;
+			thermal-sensors = <&mcu 0>;
+
+			trips {
+				soc_active1: soc-active1 {
+					temperature = <30000>;
+					hysteresis = <8000>;
+					type = "active";
+				};
+
+				soc_active2: soc-active2 {
+					temperature = <58000>;
+					hysteresis = <12000>;
+					type = "active";
+				};
+
+				soc_active3: soc-active3 {
+					temperature = <70000>;
+					hysteresis = <10000>;
+					type = "active";
+				};
+
+				soc_hot: soc-hot {
+					temperature = <80000>;
+					hysteresis = <5000>;
+					type = "hot";
+				};
+			};
+		};
+
+		board-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <1000>;
+			thermal-sensors = <&mcu 1>;
+
+			trips {
+				board_active: board-active {
+					temperature = <75000>;
+					hysteresis = <8000>;
+					type = "active";
+				};
+			};
+		};
+	};
+};