diff options
Diffstat (limited to 'arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts')
| -rw-r--r-- | arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts | 107 |
1 files changed, 107 insertions, 0 deletions
diff --git a/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts b/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts new file mode 100644 index 000000000000..31e825be2065 --- /dev/null +++ b/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts @@ -0,0 +1,107 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/* + * Copyright (C) 2024 Henry Bell <dmoo_dv@protonmail.com> + */ + +/dts-v1/; +#include "jh7110-common.dtsi" + +/ { + model = "Pine64 Star64"; + compatible = "pine64,star64", "starfive,jh7110"; + aliases { + ethernet1 = &gmac1; + }; +}; + +&gmac0 { + starfive,tx-use-rgmii-clk; + assigned-clocks = <&aoncrg JH7110_AONCLK_GMAC0_TX>; + assigned-clock-parents = <&aoncrg JH7110_AONCLK_GMAC0_RMII_RTX>; + status = "okay"; +}; + +&gmac1 { + phy-handle = <&phy1>; + phy-mode = "rgmii-id"; + starfive,tx-use-rgmii-clk; + assigned-clocks = <&syscrg JH7110_SYSCLK_GMAC1_TX>; + assigned-clock-parents = <&syscrg JH7110_SYSCLK_GMAC1_RMII_RTX>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; +}; + +&i2c0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; + +&phy0 { + rx-internal-delay-ps = <1500>; + motorcomm,rx-clk-drv-microamp = <2910>; + motorcomm,rx-data-drv-microamp = <2910>; + motorcomm,tx-clk-adj-enabled; + motorcomm,tx-clk-10-inverted; + motorcomm,tx-clk-100-inverted; + motorcomm,tx-clk-1000-inverted; +}; + +&phy1 { + rx-internal-delay-ps = <0>; + tx-internal-delay-ps = <300>; + motorcomm,rx-clk-drv-microamp = <2910>; + motorcomm,rx-data-drv-microamp = <2910>; + motorcomm,tx-clk-adj-enabled; + motorcomm,tx-clk-10-inverted; + motorcomm,tx-clk-100-inverted; +}; + +&pwm { + status = "okay"; +}; + +&pwmdac { + status = "okay"; +}; + +&spi0 { + status = "okay"; +}; + +&sysgpio { + usb0_pins: usb0-0 { + vbus-pins { + pinmux = <GPIOMUX(25, GPOUT_SYS_USB_DRIVE_VBUS, + GPOEN_ENABLE, + GPI_NONE)>; + bias-disable; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + }; +}; + +&usb0 { + dr_mode = "host"; + pinctrl-names = "default"; + pinctrl-0 = <&usb0_pins>; + status = "okay"; +}; + +&usb_cdns3 { + phys = <&usbphy0>, <&pciephy0>; + phy-names = "cdns3,usb2-phy", "cdns3,usb3-phy"; +}; |