diff options
Diffstat (limited to 'arch/riscv/boot/dts/starfive')
| -rw-r--r-- | arch/riscv/boot/dts/starfive/Makefile | 3 | ||||
| -rw-r--r-- | arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts | 11 | ||||
| -rw-r--r-- | arch/riscv/boot/dts/starfive/jh7100-common.dtsi | 108 | ||||
| -rw-r--r-- | arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts | 22 | ||||
| -rw-r--r-- | arch/riscv/boot/dts/starfive/jh7100.dtsi | 51 | ||||
| -rw-r--r-- | arch/riscv/boot/dts/starfive/jh7110-common.dtsi | 652 | ||||
| -rw-r--r-- | arch/riscv/boot/dts/starfive/jh7110-deepcomputing-fml13v01.dts | 17 | ||||
| -rw-r--r-- | arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts | 75 | ||||
| -rw-r--r-- | arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts | 102 | ||||
| -rw-r--r-- | arch/riscv/boot/dts/starfive/jh7110-pinfunc.h | 2 | ||||
| -rw-r--r-- | arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi | 589 | ||||
| -rw-r--r-- | arch/riscv/boot/dts/starfive/jh7110.dtsi | 194 |
12 files changed, 1227 insertions, 599 deletions
diff --git a/arch/riscv/boot/dts/starfive/Makefile b/arch/riscv/boot/dts/starfive/Makefile index 0141504c0f5c..b3bb12f78e7d 100644 --- a/arch/riscv/boot/dts/starfive/Makefile +++ b/arch/riscv/boot/dts/starfive/Makefile @@ -8,5 +8,8 @@ DTC_FLAGS_jh7110-starfive-visionfive-2-v1.3b := -@ dtb-$(CONFIG_ARCH_STARFIVE) += jh7100-beaglev-starlight.dtb dtb-$(CONFIG_ARCH_STARFIVE) += jh7100-starfive-visionfive-v1.dtb +dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-deepcomputing-fml13v01.dtb +dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-milkv-mars.dtb +dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-pine64-star64.dtb dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.2a.dtb dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.3b.dtb diff --git a/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts b/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts index 7cda3a89020a..168f5d9895a9 100644 --- a/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts +++ b/arch/riscv/boot/dts/starfive/jh7100-beaglev-starlight.dts @@ -11,3 +11,14 @@ model = "BeagleV Starlight Beta"; compatible = "beagle,beaglev-starlight-jh7100-r0", "starfive,jh7100"; }; + +&gmac { + phy-handle = <&phy>; +}; + +&mdio { + phy: ethernet-phy@7 { + reg = <7>; + reset-gpios = <&gpio 63 GPIO_ACTIVE_LOW>; + }; +}; diff --git a/arch/riscv/boot/dts/starfive/jh7100-common.dtsi b/arch/riscv/boot/dts/starfive/jh7100-common.dtsi index 42fb61c36068..ae1a6aeb0aea 100644 --- a/arch/riscv/boot/dts/starfive/jh7100-common.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7100-common.dtsi @@ -72,7 +72,91 @@ }; }; +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins>; + phy-mode = "rgmii-id"; + status = "okay"; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + }; +}; + &gpio { + gmac_pins: gmac-0 { + gtxclk-pins { + pins = <PAD_FUNC_SHARE(115)>; + bias-pull-up; + drive-strength = <35>; + input-enable; + input-schmitt-enable; + slew-rate = <0>; + }; + miitxclk-pins { + pins = <PAD_FUNC_SHARE(116)>; + bias-pull-up; + drive-strength = <14>; + input-enable; + input-schmitt-disable; + slew-rate = <0>; + }; + tx-pins { + pins = <PAD_FUNC_SHARE(117)>, + <PAD_FUNC_SHARE(119)>, + <PAD_FUNC_SHARE(120)>, + <PAD_FUNC_SHARE(121)>, + <PAD_FUNC_SHARE(122)>, + <PAD_FUNC_SHARE(123)>, + <PAD_FUNC_SHARE(124)>, + <PAD_FUNC_SHARE(125)>, + <PAD_FUNC_SHARE(126)>; + bias-pull-up; + drive-strength = <35>; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + rxclk-pins { + pins = <PAD_FUNC_SHARE(127)>; + bias-pull-up; + drive-strength = <14>; + input-enable; + input-schmitt-disable; + slew-rate = <6>; + }; + rxer-pins { + pins = <PAD_FUNC_SHARE(129)>; + bias-pull-up; + drive-strength = <14>; + input-enable; + input-schmitt-disable; + slew-rate = <0>; + }; + rx-pins { + pins = <PAD_FUNC_SHARE(128)>, + <PAD_FUNC_SHARE(130)>, + <PAD_FUNC_SHARE(131)>, + <PAD_FUNC_SHARE(132)>, + <PAD_FUNC_SHARE(133)>, + <PAD_FUNC_SHARE(134)>, + <PAD_FUNC_SHARE(135)>, + <PAD_FUNC_SHARE(136)>, + <PAD_FUNC_SHARE(137)>, + <PAD_FUNC_SHARE(138)>, + <PAD_FUNC_SHARE(139)>, + <PAD_FUNC_SHARE(140)>, + <PAD_FUNC_SHARE(141)>; + bias-pull-up; + drive-strength = <14>; + input-enable; + input-schmitt-enable; + slew-rate = <0>; + }; + }; + i2c0_pins: i2c0-0 { i2c-pins { pinmux = <GPIOMUX(62, GPO_LOW, @@ -115,6 +199,24 @@ }; }; + pwm_pins: pwm-0 { + pwm-pins { + pinmux = <GPIOMUX(7, + GPO_PWM_PAD_OUT_BIT0, + GPO_PWM_PAD_OE_N_BIT0, + GPI_NONE)>, + <GPIOMUX(5, + GPO_PWM_PAD_OUT_BIT1, + GPO_PWM_PAD_OE_N_BIT1, + GPI_NONE)>; + bias-disable; + drive-strength = <35>; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + }; + sdio0_pins: sdio0-0 { clk-pins { pinmux = <GPIOMUX(54, GPO_SDIO0_PAD_CCLK_OUT, @@ -257,6 +359,12 @@ clock-frequency = <27000000>; }; +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm_pins>; + status = "okay"; +}; + &sdio0 { broken-cd; bus-width = <4>; diff --git a/arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts b/arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts index e82af72f1aaf..692c696e1ab4 100644 --- a/arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts +++ b/arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts @@ -6,7 +6,6 @@ /dts-v1/; #include "jh7100-common.dtsi" -#include <dt-bindings/gpio/gpio.h> / { model = "StarFive VisionFive V1"; @@ -18,3 +17,24 @@ priority = <224>; }; }; + +&gmac { + phy-handle = <&phy>; +}; + +/* + * The board uses a Motorcomm YT8521 PHY supporting RGMII-ID, but requires + * manual adjustment of the RX internal delay to work properly. The default + * RX delay provided by the driver (1.95ns) is too high, but applying a 50% + * reduction seems to mitigate the issue. + * + * It is worth noting the adjustment is not necessary on BeagleV Starlight SBC, + * which uses a Microchip PHY. Hence, most likely the Motorcomm PHY is the one + * responsible for the misbehaviour, not the GMAC. + */ +&mdio { + phy: ethernet-phy@0 { + reg = <0>; + rx-internal-delay-ps = <900>; + }; +}; diff --git a/arch/riscv/boot/dts/starfive/jh7100.dtsi b/arch/riscv/boot/dts/starfive/jh7100.dtsi index 8bcf36d07f3f..7de0732b8eab 100644 --- a/arch/riscv/boot/dts/starfive/jh7100.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7100.dtsi @@ -13,7 +13,7 @@ #address-cells = <2>; #size-cells = <2>; - cpus { + cpus: cpus { #address-cells = <1>; #size-cells = <0>; @@ -116,6 +116,7 @@ osc_sys: osc-sys { compatible = "fixed-clock"; #clock-cells = <0>; + clock-output-names = "osc_sys"; /* This value must be overridden by the board */ clock-frequency = <0>; }; @@ -123,6 +124,7 @@ osc_aud: osc-aud { compatible = "fixed-clock"; #clock-cells = <0>; + clock-output-names = "osc_aud"; /* This value must be overridden by the board */ clock-frequency = <0>; }; @@ -130,6 +132,7 @@ gmac_rmii_ref: gmac-rmii-ref { compatible = "fixed-clock"; #clock-cells = <0>; + clock-output-names = "gmac_rmii_ref"; /* Should be overridden by the board when needed */ clock-frequency = <0>; }; @@ -137,6 +140,7 @@ gmac_gr_mii_rxclk: gmac-gr-mii-rxclk { compatible = "fixed-clock"; #clock-cells = <0>; + clock-output-names = "gmac_gr_mii_rxclk"; /* Should be overridden by the board when needed */ clock-frequency = <0>; }; @@ -204,6 +208,37 @@ status = "disabled"; }; + gmac: ethernet@10020000 { + compatible = "starfive,jh7100-dwmac", "snps,dwmac"; + reg = <0x0 0x10020000 0x0 0x10000>; + clocks = <&clkgen JH7100_CLK_GMAC_ROOT_DIV>, + <&clkgen JH7100_CLK_GMAC_AHB>, + <&clkgen JH7100_CLK_GMAC_PTP_REF>, + <&clkgen JH7100_CLK_GMAC_TX_INV>, + <&clkgen JH7100_CLK_GMAC_GTX>; + clock-names = "stmmaceth", "pclk", "ptp_ref", "tx", "gtx"; + resets = <&rstgen JH7100_RSTN_GMAC_AHB>; + reset-names = "ahb"; + interrupts = <6>, <7>; + interrupt-names = "macirq", "eth_wake_irq"; + max-frame-size = <9000>; + snps,multicast-filter-bins = <32>; + snps,perfect-filter-entries = <128>; + starfive,syscon = <&sysmain 0x70 0>; + rx-fifo-depth = <32768>; + tx-fifo-depth = <16384>; + snps,axi-config = <&stmmac_axi_setup>; + snps,fixed-burst; + snps,force_thresh_dma_mode; + status = "disabled"; + + stmmac_axi_setup: stmmac-axi-config { + snps,wr_osr_lmt = <16>; + snps,rd_osr_lmt = <16>; + snps,blen = <256 128 64 32 0 0 0>; + }; + }; + clkgen: clock-controller@11800000 { compatible = "starfive,jh7100-clkgen"; reg = <0x0 0x11800000 0x0 0x10000>; @@ -218,6 +253,11 @@ #reset-cells = <1>; }; + sysmain: syscon@11850000 { + compatible = "starfive,jh7100-sysmain", "syscon"; + reg = <0x0 0x11850000 0x0 0x10000>; + }; + i2c0: i2c@118b0000 { compatible = "snps,designware-i2c"; reg = <0x0 0x118b0000 0x0 0x10000>; @@ -320,6 +360,15 @@ <&rstgen JH7100_RSTN_WDT>; }; + pwm: pwm@12490000 { + compatible = "starfive,jh7100-pwm", "opencores,pwm-v1"; + reg = <0x0 0x12490000 0x0 0x10000>; + clocks = <&clkgen JH7100_CLK_PWM_APB>; + resets = <&rstgen JH7100_RSTN_PWM_APB>; + #pwm-cells = <3>; + status = "disabled"; + }; + sfctemp: temperature-sensor@124a0000 { compatible = "starfive,jh7100-temp"; reg = <0x0 0x124a0000 0x0 0x10000>; diff --git a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi new file mode 100644 index 000000000000..48fb5091b817 --- /dev/null +++ b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi @@ -0,0 +1,652 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/* + * Copyright (C) 2022 StarFive Technology Co., Ltd. + * Copyright (C) 2022 Emil Renner Berthing <kernel@esmil.dk> + */ + +/dts-v1/; +#include "jh7110.dtsi" +#include "jh7110-pinfunc.h" +#include <dt-bindings/gpio/gpio.h> + +/ { + aliases { + ethernet0 = &gmac0; + i2c0 = &i2c0; + i2c2 = &i2c2; + i2c5 = &i2c5; + i2c6 = &i2c6; + mmc0 = &mmc0; + mmc1 = &mmc1; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0x1 0x0>; + }; + + gpio-restart { + compatible = "gpio-restart"; + gpios = <&sysgpio 35 GPIO_ACTIVE_HIGH>; + priority = <224>; + }; + + pwmdac_codec: audio-codec { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "StarFive-PWMDAC-Sound-Card"; + #address-cells = <1>; + #size-cells = <0>; + + simple-audio-card,dai-link@0 { + reg = <0>; + format = "left_j"; + bitclock-master = <&sndcpu0>; + frame-master = <&sndcpu0>; + + sndcpu0: cpu { + sound-dai = <&pwmdac>; + }; + + codec { + sound-dai = <&pwmdac_codec>; + }; + }; + }; +}; + +&cpus { + timebase-frequency = <4000000>; +}; + +&dvp_clk { + clock-frequency = <74250000>; +}; + +&gmac0_rgmii_rxin { + clock-frequency = <125000000>; +}; + +&gmac0_rmii_refin { + clock-frequency = <50000000>; +}; + +&gmac1_rgmii_rxin { + clock-frequency = <125000000>; +}; + +&gmac1_rmii_refin { + clock-frequency = <50000000>; +}; + +&hdmitx0_pixelclk { + clock-frequency = <297000000>; +}; + +&i2srx_bclk_ext { + clock-frequency = <12288000>; +}; + +&i2srx_lrck_ext { + clock-frequency = <192000>; +}; + +&i2stx_bclk_ext { + clock-frequency = <12288000>; +}; + +&i2stx_lrck_ext { + clock-frequency = <192000>; +}; + +&mclk_ext { + clock-frequency = <12288000>; +}; + +&osc { + clock-frequency = <24000000>; +}; + +&rtc_osc { + clock-frequency = <32768>; +}; + +&tdm_ext { + clock-frequency = <49152000>; +}; + +&camss { + assigned-clocks = <&ispcrg JH7110_ISPCLK_DOM4_APB_FUNC>, + <&ispcrg JH7110_ISPCLK_MIPI_RX0_PXL>; + assigned-clock-rates = <49500000>, <198000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + + camss_from_csi2rx: endpoint { + remote-endpoint = <&csi2rx_to_camss>; + }; + }; + }; +}; + +&csi2rx { + assigned-clocks = <&ispcrg JH7110_ISPCLK_VIN_SYS>; + assigned-clock-rates = <297000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + /* remote MIPI sensor endpoint */ + }; + + port@1 { + reg = <1>; + + csi2rx_to_camss: endpoint { + remote-endpoint = <&camss_from_csi2rx>; + }; + }; + }; +}; + +&gmac0 { + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; +}; + +&i2c0 { + clock-frequency = <100000>; + i2c-sda-hold-time-ns = <300>; + i2c-sda-falling-time-ns = <510>; + i2c-scl-falling-time-ns = <510>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; +}; + +&i2c2 { + clock-frequency = <100000>; + i2c-sda-hold-time-ns = <300>; + i2c-sda-falling-time-ns = <510>; + i2c-scl-falling-time-ns = <510>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + status = "okay"; +}; + +&i2c5 { + clock-frequency = <100000>; + i2c-sda-hold-time-ns = <300>; + i2c-sda-falling-time-ns = <510>; + i2c-scl-falling-time-ns = <510>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_pins>; + status = "okay"; + + axp15060: pmic@36 { + compatible = "x-powers,axp15060"; + reg = <0x36>; + interrupt-controller; + #interrupt-cells = <1>; + + regulators { + vcc_3v3: dcdc1 { + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_3v3"; + }; + + vdd_cpu: dcdc2 { + regulator-always-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1540000>; + regulator-name = "vdd-cpu"; + }; + + emmc_vdd: aldo4 { + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "emmc_vdd"; + }; + }; + }; +}; + +&i2c6 { + clock-frequency = <100000>; + i2c-sda-hold-time-ns = <300>; + i2c-sda-falling-time-ns = <510>; + i2c-scl-falling-time-ns = <510>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_pins>; + status = "okay"; +}; + +&mmc0 { + max-frequency = <100000000>; + assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO0_SDCARD>; + assigned-clock-rates = <50000000>; + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + cap-mmc-hw-reset; + post-power-on-delay-ms = <200>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&emmc_vdd>; + status = "okay"; +}; + +&mmc1 { + max-frequency = <100000000>; + assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO1_SDCARD>; + assigned-clock-rates = <50000000>; + bus-width = <4>; + no-sdio; + no-mmc; + cd-gpios = <&sysgpio 41 GPIO_ACTIVE_LOW>; + disable-wp; + cap-sd-highspeed; + post-power-on-delay-ms = <200>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + status = "okay"; +}; + +&pcie0 { + perst-gpios = <&sysgpio 26 GPIO_ACTIVE_LOW>; + phys = <&pciephy0>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_pins>; +}; + +&pcie1 { + perst-gpios = <&sysgpio 28 GPIO_ACTIVE_LOW>; + phys = <&pciephy1>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_pins>; +}; + +&pwmdac { + pinctrl-names = "default"; + pinctrl-0 = <&pwmdac_pins>; +}; + +&qspi { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + nor_flash: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + cdns,read-delay = <5>; + spi-max-frequency = <12000000>; + cdns,tshsl-ns = <1>; + cdns,tsd2d-ns = <1>; + cdns,tchsh-ns = <1>; + cdns,tslch-ns = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + spl@0 { + reg = <0x0 0xf0000>; + }; + uboot-env@f0000 { + reg = <0xf0000 0x10000>; + }; + uboot@100000 { + reg = <0x100000 0xf00000>; + }; + }; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm_pins>; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + + spi_dev0: spi@0 { + compatible = "rohm,dh2228fv"; + reg = <0>; + spi-max-frequency = <10000000>; + }; +}; + +&syscrg { + assigned-clocks = <&syscrg JH7110_SYSCLK_CPU_CORE>, + <&pllclk JH7110_PLLCLK_PLL0_OUT>; + assigned-clock-rates = <500000000>, <1500000000>; +}; + +&sysgpio { + i2c0_pins: i2c0-0 { + i2c-pins { + pinmux = <GPIOMUX(57, GPOUT_LOW, + GPOEN_SYS_I2C0_CLK, + GPI_SYS_I2C0_CLK)>, + <GPIOMUX(58, GPOUT_LOW, + GPOEN_SYS_I2C0_DATA, + GPI_SYS_I2C0_DATA)>; + bias-disable; /* external pull-up */ + input-enable; + input-schmitt-enable; + }; + }; + + i2c2_pins: i2c2-0 { + i2c-pins { + pinmux = <GPIOMUX(3, GPOUT_LOW, + GPOEN_SYS_I2C2_CLK, + GPI_SYS_I2C2_CLK)>, + <GPIOMUX(2, GPOUT_LOW, + GPOEN_SYS_I2C2_DATA, + GPI_SYS_I2C2_DATA)>; + bias-disable; /* external pull-up */ + input-enable; + input-schmitt-enable; + }; + }; + + i2c5_pins: i2c5-0 { + i2c-pins { + pinmux = <GPIOMUX(19, GPOUT_LOW, + GPOEN_SYS_I2C5_CLK, + GPI_SYS_I2C5_CLK)>, + <GPIOMUX(20, GPOUT_LOW, + GPOEN_SYS_I2C5_DATA, + GPI_SYS_I2C5_DATA)>; + bias-disable; /* external pull-up */ + input-enable; + input-schmitt-enable; + }; + }; + + i2c6_pins: i2c6-0 { + i2c-pins { + pinmux = <GPIOMUX(16, GPOUT_LOW, + GPOEN_SYS_I2C6_CLK, + GPI_SYS_I2C6_CLK)>, + <GPIOMUX(17, GPOUT_LOW, + GPOEN_SYS_I2C6_DATA, + GPI_SYS_I2C6_DATA)>; + bias-disable; /* external pull-up */ + input-enable; + input-schmitt-enable; + }; + }; + + mmc0_pins: mmc0-0 { + rst-pins { + pinmux = <GPIOMUX(62, GPOUT_SYS_SDIO0_RST, + GPOEN_ENABLE, + GPI_NONE)>; + bias-pull-up; + drive-strength = <12>; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + + mmc-pins { + pinmux = <PINMUX(64, 0)>, + <PINMUX(65, 0)>, + <PINMUX(66, 0)>, + <PINMUX(67, 0)>, + <PINMUX(68, 0)>, + <PINMUX(69, 0)>, + <PINMUX(70, 0)>, + <PINMUX(71, 0)>, + <PINMUX(72, 0)>, + <PINMUX(73, 0)>; + bias-pull-up; + drive-strength = <12>; + input-enable; + }; + }; + + mmc1_pins: mmc1-0 { + clk-pins { + pinmux = <GPIOMUX(10, GPOUT_SYS_SDIO1_CLK, + GPOEN_ENABLE, + GPI_NONE)>; + bias-pull-up; + drive-strength = <12>; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + + mmc-pins { + pinmux = <GPIOMUX(9, GPOUT_SYS_SDIO1_CMD, + GPOEN_SYS_SDIO1_CMD, + GPI_SYS_SDIO1_CMD)>, + <GPIOMUX(11, GPOUT_SYS_SDIO1_DATA0, + GPOEN_SYS_SDIO1_DATA0, + GPI_SYS_SDIO1_DATA0)>, + <GPIOMUX(12, GPOUT_SYS_SDIO1_DATA1, + GPOEN_SYS_SDIO1_DATA1, + GPI_SYS_SDIO1_DATA1)>, + <GPIOMUX(7, GPOUT_SYS_SDIO1_DATA2, + GPOEN_SYS_SDIO1_DATA2, + GPI_SYS_SDIO1_DATA2)>, + <GPIOMUX(8, GPOUT_SYS_SDIO1_DATA3, + GPOEN_SYS_SDIO1_DATA3, + GPI_SYS_SDIO1_DATA3)>; + bias-pull-up; + drive-strength = <12>; + input-enable; + input-schmitt-enable; + slew-rate = <0>; + }; + }; + + pcie0_pins: pcie0-0 { + clkreq-pins { + pinmux = <GPIOMUX(27, GPOUT_LOW, + GPOEN_DISABLE, + GPI_NONE)>; + bias-pull-down; + drive-strength = <2>; + input-enable; + input-schmitt-disable; + slew-rate = <0>; + }; + + wake-pins { + pinmux = <GPIOMUX(32, GPOUT_LOW, + GPOEN_DISABLE, + GPI_NONE)>; + bias-pull-up; + drive-strength = <2>; + input-enable; + input-schmitt-disable; + slew-rate = <0>; + }; + }; + + pcie1_pins: pcie1-0 { + clkreq-pins { + pinmux = <GPIOMUX(29, GPOUT_LOW, + GPOEN_DISABLE, + GPI_NONE)>; + bias-pull-down; + drive-strength = <2>; + input-enable; + input-schmitt-disable; + slew-rate = <0>; + }; + + wake-pins { + pinmux = <GPIOMUX(21, GPOUT_LOW, + GPOEN_DISABLE, + GPI_NONE)>; + bias-pull-up; + drive-strength = <2>; + input-enable; + input-schmitt-disable; + slew-rate = <0>; + }; + }; + + pwmdac_pins: pwmdac-0 { + pwmdac-pins { + pinmux = <GPIOMUX(33, GPOUT_SYS_PWMDAC_LEFT, + GPOEN_ENABLE, + GPI_NONE)>, + <GPIOMUX(34, GPOUT_SYS_PWMDAC_RIGHT, + GPOEN_ENABLE, + GPI_NONE)>; + bias-disable; + drive-strength = <2>; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + }; + + pwm_pins: pwm-0 { + pwm-pins { + pinmux = <GPIOMUX(46, GPOUT_SYS_PWM_CHANNEL0, + GPOEN_SYS_PWM0_CHANNEL0, + GPI_NONE)>, + <GPIOMUX(59, GPOUT_SYS_PWM_CHANNEL1, + GPOEN_SYS_PWM0_CHANNEL1, + GPI_NONE)>; + bias-disable; + drive-strength = <12>; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + }; + + spi0_pins: spi0-0 { + mosi-pins { + pinmux = <GPIOMUX(52, GPOUT_SYS_SPI0_TXD, + GPOEN_ENABLE, + GPI_NONE)>; + bias-disable; + input-disable; + input-schmitt-disable; + }; + + miso-pins { + pinmux = <GPIOMUX(53, GPOUT_LOW, + GPOEN_DISABLE, + GPI_SYS_SPI0_RXD)>; + bias-pull-up; + input-enable; + input-schmitt-enable; + }; + + sck-pins { + pinmux = <GPIOMUX(48, GPOUT_SYS_SPI0_CLK, + GPOEN_ENABLE, + GPI_SYS_SPI0_CLK)>; + bias-disable; + input-disable; + input-schmitt-disable; + }; + + ss-pins { + pinmux = <GPIOMUX(49, GPOUT_SYS_SPI0_FSS, + GPOEN_ENABLE, + GPI_SYS_SPI0_FSS)>; + bias-disable; + input-disable; + input-schmitt-disable; + }; + }; + + uart0_pins: uart0-0 { + tx-pins { + pinmux = <GPIOMUX(5, GPOUT_SYS_UART0_TX, + GPOEN_ENABLE, + GPI_NONE)>; + bias-disable; + drive-strength = <12>; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + + rx-pins { + pinmux = <GPIOMUX(6, GPOUT_LOW, + GPOEN_DISABLE, + GPI_SYS_UART0_RX)>; + bias-disable; /* external pull-up */ + drive-strength = <2>; + input-enable; + input-schmitt-enable; + slew-rate = <0>; + }; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; + +&U74_1 { + cpu-supply = <&vdd_cpu>; +}; + +&U74_2 { + cpu-supply = <&vdd_cpu>; +}; + +&U74_3 { + cpu-supply = <&vdd_cpu>; +}; + +&U74_4 { + cpu-supply = <&vdd_cpu>; +}; diff --git a/arch/riscv/boot/dts/starfive/jh7110-deepcomputing-fml13v01.dts b/arch/riscv/boot/dts/starfive/jh7110-deepcomputing-fml13v01.dts new file mode 100644 index 000000000000..30b0715196b6 --- /dev/null +++ b/arch/riscv/boot/dts/starfive/jh7110-deepcomputing-fml13v01.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/* + * Copyright (C) 2024 DeepComputing (HK) Limited + */ + +/dts-v1/; +#include "jh7110-common.dtsi" + +/ { + model = "DeepComputing FML13V01"; + compatible = "deepcomputing,fml13v01", "starfive,jh7110"; +}; + +&usb0 { + dr_mode = "host"; + status = "okay"; +}; diff --git a/arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts b/arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts new file mode 100644 index 000000000000..3bd62ab78523 --- /dev/null +++ b/arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts @@ -0,0 +1,75 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/* + * Copyright (C) 2023 Jisheng Zhang <jszhang@kernel.org> + */ + +/dts-v1/; +#include "jh7110-common.dtsi" + +/ { + model = "Milk-V Mars"; + compatible = "milkv,mars", "starfive,jh7110"; +}; + +&gmac0 { + starfive,tx-use-rgmii-clk; + assigned-clocks = <&aoncrg JH7110_AONCLK_GMAC0_TX>; + assigned-clock-parents = <&aoncrg JH7110_AONCLK_GMAC0_RMII_RTX>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; + +&phy0 { + motorcomm,tx-clk-adj-enabled; + motorcomm,tx-clk-10-inverted; + motorcomm,tx-clk-100-inverted; + motorcomm,tx-clk-1000-inverted; + motorcomm,rx-clk-drv-microamp = <3970>; + motorcomm,rx-data-drv-microamp = <2910>; + rx-internal-delay-ps = <1500>; + tx-internal-delay-ps = <1500>; +}; + +&pwm { + status = "okay"; +}; + +&pwmdac { + status = "okay"; +}; + +&spi0 { + status = "okay"; +}; + +&sysgpio { + usb0_pins: usb0-0 { + vbus-pins { + pinmux = <GPIOMUX(25, GPOUT_SYS_USB_DRIVE_VBUS, + GPOEN_ENABLE, + GPI_NONE)>; + bias-disable; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + }; +}; + +&usb0 { + dr_mode = "host"; + pinctrl-names = "default"; + pinctrl-0 = <&usb0_pins>; + status = "okay"; +}; diff --git a/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts b/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts new file mode 100644 index 000000000000..b764d4d92fd9 --- /dev/null +++ b/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts @@ -0,0 +1,102 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/* + * Copyright (C) 2024 Henry Bell <dmoo_dv@protonmail.com> + */ + +/dts-v1/; +#include "jh7110-common.dtsi" + +/ { + model = "Pine64 Star64"; + compatible = "pine64,star64", "starfive,jh7110"; + aliases { + ethernet1 = &gmac1; + }; +}; + +&gmac0 { + starfive,tx-use-rgmii-clk; + assigned-clocks = <&aoncrg JH7110_AONCLK_GMAC0_TX>; + assigned-clock-parents = <&aoncrg JH7110_AONCLK_GMAC0_RMII_RTX>; + status = "okay"; +}; + +&gmac1 { + phy-handle = <&phy1>; + phy-mode = "rgmii-id"; + starfive,tx-use-rgmii-clk; + assigned-clocks = <&syscrg JH7110_SYSCLK_GMAC1_TX>; + assigned-clock-parents = <&syscrg JH7110_SYSCLK_GMAC1_RMII_RTX>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; +}; + +&i2c0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; + +&phy0 { + rx-internal-delay-ps = <1500>; + motorcomm,rx-clk-drv-microamp = <2910>; + motorcomm,rx-data-drv-microamp = <2910>; + motorcomm,tx-clk-adj-enabled; + motorcomm,tx-clk-10-inverted; + motorcomm,tx-clk-100-inverted; + motorcomm,tx-clk-1000-inverted; +}; + +&phy1 { + rx-internal-delay-ps = <0>; + tx-internal-delay-ps = <300>; + motorcomm,rx-clk-drv-microamp = <2910>; + motorcomm,rx-data-drv-microamp = <2910>; + motorcomm,tx-clk-adj-enabled; + motorcomm,tx-clk-10-inverted; + motorcomm,tx-clk-100-inverted; +}; + +&pwm { + status = "okay"; +}; + +&pwmdac { + status = "okay"; +}; + +&spi0 { + status = "okay"; +}; + +&sysgpio { + usb0_pins: usb0-0 { + vbus-pins { + pinmux = <GPIOMUX(25, GPOUT_SYS_USB_DRIVE_VBUS, + GPOEN_ENABLE, + GPI_NONE)>; + bias-disable; + input-disable; + input-schmitt-disable; + slew-rate = <0>; + }; + }; +}; + +&usb0 { + dr_mode = "host"; + pinctrl-names = "default"; + pinctrl-0 = <&usb0_pins>; + status = "okay"; +}; diff --git a/arch/riscv/boot/dts/starfive/jh7110-pinfunc.h b/arch/riscv/boot/dts/starfive/jh7110-pinfunc.h index 256de17f5261..ae49c908e7fb 100644 --- a/arch/riscv/boot/dts/starfive/jh7110-pinfunc.h +++ b/arch/riscv/boot/dts/starfive/jh7110-pinfunc.h @@ -89,7 +89,7 @@ #define GPOUT_SYS_SDIO1_DATA1 59 #define GPOUT_SYS_SDIO1_DATA2 60 #define GPOUT_SYS_SDIO1_DATA3 61 -#define GPOUT_SYS_SDIO1_DATA4 63 +#define GPOUT_SYS_SDIO1_DATA4 62 #define GPOUT_SYS_SDIO1_DATA5 63 #define GPOUT_SYS_SDIO1_DATA6 64 #define GPOUT_SYS_SDIO1_DATA7 65 diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi index b89e9791efa7..5f14afb2c24d 100644 --- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi @@ -5,140 +5,16 @@ */ /dts-v1/; -#include "jh7110.dtsi" -#include "jh7110-pinfunc.h" -#include <dt-bindings/gpio/gpio.h> +#include "jh7110-common.dtsi" / { aliases { - ethernet0 = &gmac0; ethernet1 = &gmac1; - i2c0 = &i2c0; - i2c2 = &i2c2; - i2c5 = &i2c5; - i2c6 = &i2c6; - mmc0 = &mmc0; - mmc1 = &mmc1; - serial0 = &uart0; }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - cpus { - timebase-frequency = <4000000>; - }; - - memory@40000000 { - device_type = "memory"; - reg = <0x0 0x40000000 0x1 0x0>; - }; - - gpio-restart { - compatible = "gpio-restart"; - gpios = <&sysgpio 35 GPIO_ACTIVE_HIGH>; - priority = <224>; - }; - - pwmdac_codec: pwmdac-codec { - compatible = "linux,spdif-dit"; - #sound-dai-cells = <0>; - }; - - sound-pwmdac { - compatible = "simple-audio-card"; - simple-audio-card,name = "StarFive-PWMDAC-Sound-Card"; - #address-cells = <1>; - #size-cells = <0>; - - simple-audio-card,dai-link@0 { - reg = <0>; - format = "left_j"; - bitclock-master = <&sndcpu0>; - frame-master = <&sndcpu0>; - - sndcpu0: cpu { - sound-dai = <&pwmdac>; - }; - - codec { - sound-dai = <&pwmdac_codec>; - }; - }; - }; -}; - -&dvp_clk { - clock-frequency = <74250000>; -}; - -&gmac0_rgmii_rxin { - clock-frequency = <125000000>; -}; - -&gmac0_rmii_refin { - clock-frequency = <50000000>; -}; - -&gmac1_rgmii_rxin { - clock-frequency = <125000000>; -}; - -&gmac1_rmii_refin { - clock-frequency = <50000000>; -}; - -&hdmitx0_pixelclk { - clock-frequency = <297000000>; -}; - -&i2srx_bclk_ext { - clock-frequency = <12288000>; -}; - -&i2srx_lrck_ext { - clock-frequency = <192000>; -}; - -&i2stx_bclk_ext { - clock-frequency = <12288000>; -}; - -&i2stx_lrck_ext { - clock-frequency = <192000>; -}; - -&mclk_ext { - clock-frequency = <12288000>; -}; - -&osc { - clock-frequency = <24000000>; -}; - -&rtc_osc { - clock-frequency = <32768>; -}; - -&tdm_ext { - clock-frequency = <49152000>; }; &gmac0 { - phy-handle = <&phy0>; - phy-mode = "rgmii-id"; status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,dwmac-mdio"; - - phy0: ethernet-phy@0 { - reg = <0>; - }; - }; }; &gmac1 { @@ -158,467 +34,30 @@ }; &i2c0 { - clock-frequency = <100000>; - i2c-sda-hold-time-ns = <300>; - i2c-sda-falling-time-ns = <510>; - i2c-scl-falling-time-ns = <510>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins>; - status = "okay"; -}; - -&i2c2 { - clock-frequency = <100000>; - i2c-sda-hold-time-ns = <300>; - i2c-sda-falling-time-ns = <510>; - i2c-scl-falling-time-ns = <510>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins>; - status = "okay"; -}; - -&i2c5 { - clock-frequency = <100000>; - i2c-sda-hold-time-ns = <300>; - i2c-sda-falling-time-ns = <510>; - i2c-scl-falling-time-ns = <510>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c5_pins>; - status = "okay"; - - axp15060: pmic@36 { - compatible = "x-powers,axp15060"; - reg = <0x36>; - interrupts = <0>; - interrupt-controller; - #interrupt-cells = <1>; - - regulators { - vcc_3v3: dcdc1 { - regulator-boot-on; - regulator-always-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc_3v3"; - }; - - vdd_cpu: dcdc2 { - regulator-always-on; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1540000>; - regulator-name = "vdd-cpu"; - }; - - emmc_vdd: aldo4 { - regulator-boot-on; - regulator-always-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "emmc_vdd"; - }; - }; - }; -}; - -&i2c6 { - clock-frequency = <100000>; - i2c-sda-hold-time-ns = <300>; - i2c-sda-falling-time-ns = <510>; - i2c-scl-falling-time-ns = <510>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c6_pins>; - status = "okay"; -}; - -&i2srx { - pinctrl-names = "default"; - pinctrl-0 = <&i2srx_pins>; - status = "okay"; -}; - -&i2stx0 { - pinctrl-names = "default"; - pinctrl-0 = <&mclk_ext_pins>; - status = "okay"; -}; - -&i2stx1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2stx1_pins>; status = "okay"; }; &mmc0 { - max-frequency = <100000000>; - assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO0_SDCARD>; - assigned-clock-rates = <50000000>; - bus-width = <8>; - cap-mmc-highspeed; - mmc-ddr-1_8v; - mmc-hs200-1_8v; non-removable; - cap-mmc-hw-reset; - post-power-on-delay-ms = <200>; - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins>; - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&emmc_vdd>; - status = "okay"; }; -&mmc1 { - max-frequency = <100000000>; - assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO1_SDCARD>; - assigned-clock-rates = <50000000>; - bus-width = <4>; - no-sdio; - no-mmc; - broken-cd; - cap-sd-highspeed; - post-power-on-delay-ms = <200>; - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins>; +&pcie0 { status = "okay"; }; -&pwmdac { - pinctrl-names = "default"; - pinctrl-0 = <&pwmdac_pins>; +&pcie1 { status = "okay"; }; -&qspi { - #address-cells = <1>; - #size-cells = <0>; +&pwm { status = "okay"; - - nor_flash: flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - cdns,read-delay = <5>; - spi-max-frequency = <12000000>; - cdns,tshsl-ns = <1>; - cdns,tsd2d-ns = <1>; - cdns,tchsh-ns = <1>; - cdns,tslch-ns = <1>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - spl@0 { - reg = <0x0 0x80000>; - }; - uboot-env@f0000 { - reg = <0xf0000 0x10000>; - }; - uboot@100000 { - reg = <0x100000 0x400000>; - }; - reserved-data@600000 { - reg = <0x600000 0xa00000>; - }; - }; - }; }; -&spi0 { - pinctrl-names = "default"; - pinctrl-0 = <&spi0_pins>; - status = "okay"; - - spi_dev0: spi@0 { - compatible = "rohm,dh2228fv"; - reg = <0>; - spi-max-frequency = <10000000>; - }; -}; - -&sysgpio { - i2c0_pins: i2c0-0 { - i2c-pins { - pinmux = <GPIOMUX(57, GPOUT_LOW, - GPOEN_SYS_I2C0_CLK, - GPI_SYS_I2C0_CLK)>, - <GPIOMUX(58, GPOUT_LOW, - GPOEN_SYS_I2C0_DATA, - GPI_SYS_I2C0_DATA)>; - bias-disable; /* external pull-up */ - input-enable; - input-schmitt-enable; - }; - }; - - i2c2_pins: i2c2-0 { - i2c-pins { - pinmux = <GPIOMUX(3, GPOUT_LOW, - GPOEN_SYS_I2C2_CLK, - GPI_SYS_I2C2_CLK)>, - <GPIOMUX(2, GPOUT_LOW, - GPOEN_SYS_I2C2_DATA, - GPI_SYS_I2C2_DATA)>; - bias-disable; /* external pull-up */ - input-enable; - input-schmitt-enable; - }; - }; - - i2c5_pins: i2c5-0 { - i2c-pins { - pinmux = <GPIOMUX(19, GPOUT_LOW, - GPOEN_SYS_I2C5_CLK, - GPI_SYS_I2C5_CLK)>, - <GPIOMUX(20, GPOUT_LOW, - GPOEN_SYS_I2C5_DATA, - GPI_SYS_I2C5_DATA)>; - bias-disable; /* external pull-up */ - input-enable; - input-schmitt-enable; - }; - }; - - i2c6_pins: i2c6-0 { - i2c-pins { - pinmux = <GPIOMUX(16, GPOUT_LOW, - GPOEN_SYS_I2C6_CLK, - GPI_SYS_I2C6_CLK)>, - <GPIOMUX(17, GPOUT_LOW, - GPOEN_SYS_I2C6_DATA, - GPI_SYS_I2C6_DATA)>; - bias-disable; /* external pull-up */ - input-enable; - input-schmitt-enable; - }; - }; - - i2srx_pins: i2srx-0 { - clk-sd-pins { - pinmux = <GPIOMUX(38, GPOUT_LOW, - GPOEN_DISABLE, - GPI_SYS_I2SRX_BCLK)>, - <GPIOMUX(63, GPOUT_LOW, - GPOEN_DISABLE, - GPI_SYS_I2SRX_LRCK)>, - <GPIOMUX(38, GPOUT_LOW, - GPOEN_DISABLE, - GPI_SYS_I2STX1_BCLK)>, - <GPIOMUX(63, GPOUT_LOW, - GPOEN_DISABLE, - GPI_SYS_I2STX1_LRCK)>, - <GPIOMUX(61, GPOUT_LOW, - GPOEN_DISABLE, - GPI_SYS_I2SRX_SDIN0)>; - input-enable; - }; - }; - - i2stx1_pins: i2stx1-0 { - sd-pins { - pinmux = <GPIOMUX(44, GPOUT_SYS_I2STX1_SDO0, - GPOEN_ENABLE, - GPI_NONE)>; - bias-disable; - input-disable; - }; - }; - - mclk_ext_pins: mclk-ext-0 { - mclk-ext-pins { - pinmux = <GPIOMUX(4, GPOUT_LOW, - GPOEN_DISABLE, - GPI_SYS_MCLK_EXT)>; - input-enable; - }; - }; - - mmc0_pins: mmc0-0 { - rst-pins { - pinmux = <GPIOMUX(62, GPOUT_SYS_SDIO0_RST, - GPOEN_ENABLE, - GPI_NONE)>; - bias-pull-up; - drive-strength = <12>; - input-disable; - input-schmitt-disable; - slew-rate = <0>; - }; - - mmc-pins { - pinmux = <PINMUX(64, 0)>, - <PINMUX(65, 0)>, - <PINMUX(66, 0)>, - <PINMUX(67, 0)>, - <PINMUX(68, 0)>, - <PINMUX(69, 0)>, - <PINMUX(70, 0)>, - <PINMUX(71, 0)>, - <PINMUX(72, 0)>, - <PINMUX(73, 0)>; - bias-pull-up; - drive-strength = <12>; - input-enable; - }; - }; - - mmc1_pins: mmc1-0 { - clk-pins { - pinmux = <GPIOMUX(10, GPOUT_SYS_SDIO1_CLK, - GPOEN_ENABLE, - GPI_NONE)>; - bias-pull-up; - drive-strength = <12>; - input-disable; - input-schmitt-disable; - slew-rate = <0>; - }; - - mmc-pins { - pinmux = <GPIOMUX(9, GPOUT_SYS_SDIO1_CMD, - GPOEN_SYS_SDIO1_CMD, - GPI_SYS_SDIO1_CMD)>, - <GPIOMUX(11, GPOUT_SYS_SDIO1_DATA0, - GPOEN_SYS_SDIO1_DATA0, - GPI_SYS_SDIO1_DATA0)>, - <GPIOMUX(12, GPOUT_SYS_SDIO1_DATA1, - GPOEN_SYS_SDIO1_DATA1, - GPI_SYS_SDIO1_DATA1)>, - <GPIOMUX(7, GPOUT_SYS_SDIO1_DATA2, - GPOEN_SYS_SDIO1_DATA2, - GPI_SYS_SDIO1_DATA2)>, - <GPIOMUX(8, GPOUT_SYS_SDIO1_DATA3, - GPOEN_SYS_SDIO1_DATA3, - GPI_SYS_SDIO1_DATA3)>; - bias-pull-up; - drive-strength = <12>; - input-enable; - input-schmitt-enable; - slew-rate = <0>; - }; - }; - - pwmdac_pins: pwmdac-0 { - pwmdac-pins { - pinmux = <GPIOMUX(33, GPOUT_SYS_PWMDAC_LEFT, - GPOEN_ENABLE, - GPI_NONE)>, - <GPIOMUX(34, GPOUT_SYS_PWMDAC_RIGHT, - GPOEN_ENABLE, - GPI_NONE)>; - bias-disable; - drive-strength = <2>; - input-disable; - input-schmitt-disable; - slew-rate = <0>; - }; - }; - - spi0_pins: spi0-0 { - mosi-pins { - pinmux = <GPIOMUX(52, GPOUT_SYS_SPI0_TXD, - GPOEN_ENABLE, - GPI_NONE)>; - bias-disable; - input-disable; - input-schmitt-disable; - }; - - miso-pins { - pinmux = <GPIOMUX(53, GPOUT_LOW, - GPOEN_DISABLE, - GPI_SYS_SPI0_RXD)>; - bias-pull-up; - input-enable; - input-schmitt-enable; - }; - - sck-pins { - pinmux = <GPIOMUX(48, GPOUT_SYS_SPI0_CLK, - GPOEN_ENABLE, - GPI_SYS_SPI0_CLK)>; - bias-disable; - input-disable; - input-schmitt-disable; - }; - - ss-pins { - pinmux = <GPIOMUX(49, GPOUT_SYS_SPI0_FSS, - GPOEN_ENABLE, - GPI_SYS_SPI0_FSS)>; - bias-disable; - input-disable; - input-schmitt-disable; - }; - }; - - tdm_pins: tdm-0 { - tx-pins { - pinmux = <GPIOMUX(44, GPOUT_SYS_TDM_TXD, - GPOEN_ENABLE, - GPI_NONE)>; - bias-pull-up; - drive-strength = <2>; - input-disable; - input-schmitt-disable; - slew-rate = <0>; - }; - - rx-pins { - pinmux = <GPIOMUX(61, GPOUT_HIGH, - GPOEN_DISABLE, - GPI_SYS_TDM_RXD)>; - input-enable; - }; - - sync-pins { - pinmux = <GPIOMUX(63, GPOUT_HIGH, - GPOEN_DISABLE, - GPI_SYS_TDM_SYNC)>; - input-enable; - }; - - pcmclk-pins { - pinmux = <GPIOMUX(38, GPOUT_HIGH, - GPOEN_DISABLE, - GPI_SYS_TDM_CLK)>; - input-enable; - }; - }; - - uart0_pins: uart0-0 { - tx-pins { - pinmux = <GPIOMUX(5, GPOUT_SYS_UART0_TX, - GPOEN_ENABLE, - GPI_NONE)>; - bias-disable; - drive-strength = <12>; - input-disable; - input-schmitt-disable; - slew-rate = <0>; - }; - - rx-pins { - pinmux = <GPIOMUX(6, GPOUT_LOW, - GPOEN_DISABLE, - GPI_SYS_UART0_RX)>; - bias-disable; /* external pull-up */ - drive-strength = <2>; - input-enable; - input-schmitt-enable; - slew-rate = <0>; - }; - }; -}; - -&tdm { - pinctrl-names = "default"; - pinctrl-0 = <&tdm_pins>; +&pwmdac { status = "okay"; }; -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins>; +&spi0 { status = "okay"; }; @@ -626,19 +65,3 @@ dr_mode = "peripheral"; status = "okay"; }; - -&U74_1 { - cpu-supply = <&vdd_cpu>; -}; - -&U74_2 { - cpu-supply = <&vdd_cpu>; -}; - -&U74_3 { - cpu-supply = <&vdd_cpu>; -}; - -&U74_4 { - cpu-supply = <&vdd_cpu>; -}; diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi index 74ed3b9264d8..0d8339357bad 100644 --- a/arch/riscv/boot/dts/starfive/jh7110.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi @@ -15,7 +15,7 @@ #address-cells = <2>; #size-cells = <2>; - cpus { + cpus: cpus { #address-cells = <1>; #size-cells = <0>; @@ -387,12 +387,13 @@ }; uart0: serial@10000000 { - compatible = "snps,dw-apb-uart"; + compatible = "starfive,jh7110-uart", "snps,dw-apb-uart"; reg = <0x0 0x10000000 0x0 0x10000>; clocks = <&syscrg JH7110_SYSCLK_UART0_CORE>, <&syscrg JH7110_SYSCLK_UART0_APB>; clock-names = "baudclk", "apb_pclk"; - resets = <&syscrg JH7110_SYSRST_UART0_APB>; + resets = <&syscrg JH7110_SYSRST_UART0_APB>, + <&syscrg JH7110_SYSRST_UART0_CORE>; interrupts = <32>; reg-io-width = <4>; reg-shift = <2>; @@ -400,12 +401,13 @@ }; uart1: serial@10010000 { - compatible = "snps,dw-apb-uart"; + compatible = "starfive,jh7110-uart", "snps,dw-apb-uart"; reg = <0x0 0x10010000 0x0 0x10000>; clocks = <&syscrg JH7110_SYSCLK_UART1_CORE>, <&syscrg JH7110_SYSCLK_UART1_APB>; clock-names = "baudclk", "apb_pclk"; - resets = <&syscrg JH7110_SYSRST_UART1_APB>; + resets = <&syscrg JH7110_SYSRST_UART1_APB>, + <&syscrg JH7110_SYSRST_UART1_CORE>; interrupts = <33>; reg-io-width = <4>; reg-shift = <2>; @@ -413,12 +415,13 @@ }; uart2: serial@10020000 { - compatible = "snps,dw-apb-uart"; + compatible = "starfive,jh7110-uart", "snps,dw-apb-uart"; reg = <0x0 0x10020000 0x0 0x10000>; clocks = <&syscrg JH7110_SYSCLK_UART2_CORE>, <&syscrg JH7110_SYSCLK_UART2_APB>; clock-names = "baudclk", "apb_pclk"; - resets = <&syscrg JH7110_SYSRST_UART2_APB>; + resets = <&syscrg JH7110_SYSRST_UART2_APB>, + <&syscrg JH7110_SYSRST_UART2_CORE>; interrupts = <34>; reg-io-width = <4>; reg-shift = <2>; @@ -642,12 +645,13 @@ }; uart3: serial@12000000 { - compatible = "snps,dw-apb-uart"; + compatible = "starfive,jh7110-uart", "snps,dw-apb-uart"; reg = <0x0 0x12000000 0x0 0x10000>; clocks = <&syscrg JH7110_SYSCLK_UART3_CORE>, <&syscrg JH7110_SYSCLK_UART3_APB>; clock-names = "baudclk", "apb_pclk"; - resets = <&syscrg JH7110_SYSRST_UART3_APB>; + resets = <&syscrg JH7110_SYSRST_UART3_APB>, + <&syscrg JH7110_SYSRST_UART3_CORE>; interrupts = <45>; reg-io-width = <4>; reg-shift = <2>; @@ -655,12 +659,13 @@ }; uart4: serial@12010000 { - compatible = "snps,dw-apb-uart"; + compatible = "starfive,jh7110-uart", "snps,dw-apb-uart"; reg = <0x0 0x12010000 0x0 0x10000>; clocks = <&syscrg JH7110_SYSCLK_UART4_CORE>, <&syscrg JH7110_SYSCLK_UART4_APB>; clock-names = "baudclk", "apb_pclk"; - resets = <&syscrg JH7110_SYSRST_UART4_APB>; + resets = <&syscrg JH7110_SYSRST_UART4_APB>, + <&syscrg JH7110_SYSRST_UART4_CORE>; interrupts = <46>; reg-io-width = <4>; reg-shift = <2>; @@ -668,12 +673,13 @@ }; uart5: serial@12020000 { - compatible = "snps,dw-apb-uart"; + compatible = "starfive,jh7110-uart", "snps,dw-apb-uart"; reg = <0x0 0x12020000 0x0 0x10000>; clocks = <&syscrg JH7110_SYSCLK_UART5_CORE>, <&syscrg JH7110_SYSCLK_UART5_APB>; clock-names = "baudclk", "apb_pclk"; - resets = <&syscrg JH7110_SYSRST_UART5_APB>; + resets = <&syscrg JH7110_SYSRST_UART5_APB>, + <&syscrg JH7110_SYSRST_UART5_CORE>; interrupts = <47>; reg-io-width = <4>; reg-shift = <2>; @@ -829,6 +835,15 @@ status = "disabled"; }; + pwm: pwm@120d0000 { + compatible = "starfive,jh7110-pwm", "opencores,pwm-v1"; + reg = <0x0 0x120d0000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_PWM_APB>; + resets = <&syscrg JH7110_SYSRST_PWM_APB>; + #pwm-cells = <3>; + status = "disabled"; + }; + sfctemp: temperature-sensor@120e0000 { compatible = "starfive,jh7110-temp"; reg = <0x0 0x120e0000 0x0 0x10000>; @@ -1104,6 +1119,32 @@ #power-domain-cells = <1>; }; + csi2rx: csi@19800000 { + compatible = "starfive,jh7110-csi2rx", "cdns,csi2rx"; + reg = <0x0 0x19800000 0x0 0x10000>; + clocks = <&ispcrg JH7110_ISPCLK_VIN_SYS>, + <&ispcrg JH7110_ISPCLK_VIN_APB>, + <&ispcrg JH7110_ISPCLK_VIN_PIXEL_IF0>, + <&ispcrg JH7110_ISPCLK_VIN_PIXEL_IF1>, + <&ispcrg JH7110_ISPCLK_VIN_PIXEL_IF2>, + <&ispcrg JH7110_ISPCLK_VIN_PIXEL_IF3>; + clock-names = "sys_clk", "p_clk", + "pixel_if0_clk", "pixel_if1_clk", + "pixel_if2_clk", "pixel_if3_clk"; + resets = <&ispcrg JH7110_ISPRST_VIN_SYS>, + <&ispcrg JH7110_ISPRST_VIN_APB>, + <&ispcrg JH7110_ISPRST_VIN_PIXEL_IF0>, + <&ispcrg JH7110_ISPRST_VIN_PIXEL_IF1>, + <&ispcrg JH7110_ISPRST_VIN_PIXEL_IF2>, + <&ispcrg JH7110_ISPRST_VIN_PIXEL_IF3>; + reset-names = "sys", "reg_bank", + "pixel_if0", "pixel_if1", + "pixel_if2", "pixel_if3"; + phys = <&csi_phy>; + phy-names = "dphy"; + status = "disabled"; + }; + ispcrg: clock-controller@19810000 { compatible = "starfive,jh7110-ispcrg"; reg = <0x0 0x19810000 0x0 0x10000>; @@ -1121,6 +1162,47 @@ power-domains = <&pwrc JH7110_PD_ISP>; }; + csi_phy: phy@19820000 { + compatible = "starfive,jh7110-dphy-rx"; + reg = <0x0 0x19820000 0x0 0x10000>; + clocks = <&ispcrg JH7110_ISPCLK_M31DPHY_CFG_IN>, + <&ispcrg JH7110_ISPCLK_M31DPHY_REF_IN>, + <&ispcrg JH7110_ISPCLK_M31DPHY_TX_ESC_LAN0>; + clock-names = "cfg", "ref", "tx"; + resets = <&ispcrg JH7110_ISPRST_M31DPHY_HW>, + <&ispcrg JH7110_ISPRST_M31DPHY_B09_AON>; + power-domains = <&aon_syscon JH7110_AON_PD_DPHY_RX>; + #phy-cells = <0>; + }; + + camss: isp@19840000 { + compatible = "starfive,jh7110-camss"; + reg = <0x0 0x19840000 0x0 0x10000>, + <0x0 0x19870000 0x0 0x30000>; + reg-names = "syscon", "isp"; + clocks = <&ispcrg JH7110_ISPCLK_DOM4_APB_FUNC>, + <&ispcrg JH7110_ISPCLK_ISPV2_TOP_WRAPPER_C>, + <&ispcrg JH7110_ISPCLK_DVP_INV>, + <&ispcrg JH7110_ISPCLK_VIN_P_AXI_WR>, + <&ispcrg JH7110_ISPCLK_MIPI_RX0_PXL>, + <&syscrg JH7110_SYSCLK_ISP_TOP_CORE>, + <&syscrg JH7110_SYSCLK_ISP_TOP_AXI>; + clock-names = "apb_func", "wrapper_clk_c", "dvp_inv", + "axiwr", "mipi_rx0_pxl", "ispcore_2x", + "isp_axi"; + resets = <&ispcrg JH7110_ISPRST_ISPV2_TOP_WRAPPER_P>, + <&ispcrg JH7110_ISPRST_ISPV2_TOP_WRAPPER_C>, + <&ispcrg JH7110_ISPRST_VIN_P_AXI_RD>, + <&ispcrg JH7110_ISPRST_VIN_P_AXI_WR>, + <&syscrg JH7110_SYSRST_ISP_TOP>, + <&syscrg JH7110_SYSRST_ISP_TOP_AXI>; + reset-names = "wrapper_p", "wrapper_c", "axird", + "axiwr", "isp_top_n", "isp_top_axi"; + power-domains = <&pwrc JH7110_PD_ISP>; + interrupts = <92>, <87>, <90>, <88>; + status = "disabled"; + }; + voutcrg: clock-controller@295c0000 { compatible = "starfive,jh7110-voutcrg"; reg = <0x0 0x295c0000 0x0 0x10000>; @@ -1138,5 +1220,91 @@ #reset-cells = <1>; power-domains = <&pwrc JH7110_PD_VOUT>; }; + + pcie0: pcie@940000000 { + compatible = "starfive,jh7110-pcie"; + reg = <0x9 0x40000000 0x0 0x1000000>, + <0x0 0x2b000000 0x0 0x100000>; + reg-names = "cfg", "apb"; + linux,pci-domain = <0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0x0 0x30000000 0x0 0x30000000 0x0 0x08000000>, + <0xc3000000 0x9 0x00000000 0x9 0x00000000 0x0 0x40000000>; + interrupts = <56>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc0 0x1>, + <0x0 0x0 0x0 0x2 &pcie_intc0 0x2>, + <0x0 0x0 0x0 0x3 &pcie_intc0 0x3>, + <0x0 0x0 0x0 0x4 &pcie_intc0 0x4>; + msi-controller; + device_type = "pci"; + starfive,stg-syscon = <&stg_syscon>; + bus-range = <0x0 0xff>; + clocks = <&syscrg JH7110_SYSCLK_NOC_BUS_STG_AXI>, + <&stgcrg JH7110_STGCLK_PCIE0_TL>, + <&stgcrg JH7110_STGCLK_PCIE0_AXI_MST0>, + <&stgcrg JH7110_STGCLK_PCIE0_APB>; + clock-names = "noc", "tl", "axi_mst0", "apb"; + resets = <&stgcrg JH7110_STGRST_PCIE0_AXI_MST0>, + <&stgcrg JH7110_STGRST_PCIE0_AXI_SLV0>, + <&stgcrg JH7110_STGRST_PCIE0_AXI_SLV>, + <&stgcrg JH7110_STGRST_PCIE0_BRG>, + <&stgcrg JH7110_STGRST_PCIE0_CORE>, + <&stgcrg JH7110_STGRST_PCIE0_APB>; + reset-names = "mst0", "slv0", "slv", "brg", + "core", "apb"; + status = "disabled"; + + pcie_intc0: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + }; + }; + + pcie1: pcie@9c0000000 { + compatible = "starfive,jh7110-pcie"; + reg = <0x9 0xc0000000 0x0 0x1000000>, + <0x0 0x2c000000 0x0 0x100000>; + reg-names = "cfg", "apb"; + linux,pci-domain = <1>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0x0 0x38000000 0x0 0x38000000 0x0 0x08000000>, + <0xc3000000 0x9 0x80000000 0x9 0x80000000 0x0 0x40000000>; + interrupts = <57>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc1 0x1>, + <0x0 0x0 0x0 0x2 &pcie_intc1 0x2>, + <0x0 0x0 0x0 0x3 &pcie_intc1 0x3>, + <0x0 0x0 0x0 0x4 &pcie_intc1 0x4>; + msi-controller; + device_type = "pci"; + starfive,stg-syscon = <&stg_syscon>; + bus-range = <0x0 0xff>; + clocks = <&syscrg JH7110_SYSCLK_NOC_BUS_STG_AXI>, + <&stgcrg JH7110_STGCLK_PCIE1_TL>, + <&stgcrg JH7110_STGCLK_PCIE1_AXI_MST0>, + <&stgcrg JH7110_STGCLK_PCIE1_APB>; + clock-names = "noc", "tl", "axi_mst0", "apb"; + resets = <&stgcrg JH7110_STGRST_PCIE1_AXI_MST0>, + <&stgcrg JH7110_STGRST_PCIE1_AXI_SLV0>, + <&stgcrg JH7110_STGRST_PCIE1_AXI_SLV>, + <&stgcrg JH7110_STGRST_PCIE1_BRG>, + <&stgcrg JH7110_STGRST_PCIE1_CORE>, + <&stgcrg JH7110_STGRST_PCIE1_APB>; + reset-names = "mst0", "slv0", "slv", "brg", + "core", "apb"; + status = "disabled"; + + pcie_intc1: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + }; + }; }; }; |