diff options
Diffstat (limited to 'arch/sh/Kconfig')
-rw-r--r-- | arch/sh/Kconfig | 247 |
1 files changed, 72 insertions, 175 deletions
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index f356ee674d89..7500521b2b98 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -1,104 +1,88 @@ # SPDX-License-Identifier: GPL-2.0 config SUPERH def_bool y + select ARCH_32BIT_OFF_T + select ARCH_ENABLE_MEMORY_HOTPLUG if SPARSEMEM && MMU + select ARCH_ENABLE_MEMORY_HOTREMOVE if SPARSEMEM && MMU + select ARCH_HAVE_NMI_SAFE_CMPXCHG if (GUSA_RB || CPU_SH4A) select ARCH_HAS_BINFMT_FLAT if !MMU + select ARCH_HAS_CPU_FINALIZE_INIT + select ARCH_HAS_CURRENT_STACK_POINTER + select ARCH_HAS_GIGANTIC_PAGE + select ARCH_HAS_GCOV_PROFILE_ALL select ARCH_HAS_PTE_SPECIAL select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST + select ARCH_HIBERNATION_POSSIBLE if MMU select ARCH_MIGHT_HAVE_PC_PARPORT - select HAVE_PATA_PLATFORM - select CLKDEV_LOOKUP + select ARCH_WANT_IPC_PARSE_VERSION + select CPU_NO_EFFICIENT_FFS select DMA_DECLARE_COHERENT - select HAVE_IDE if HAS_IOPORT_MAP - select HAVE_MEMBLOCK_NODE_MAP - select HAVE_OPROFILE + select GENERIC_ATOMIC64 + select GENERIC_CMOS_UPDATE if SH_SH03 || SH_DREAMCAST + select GENERIC_IDLE_POLL_SETUP + select GENERIC_IRQ_SHOW + select GENERIC_LIB_ASHLDI3 + select GENERIC_LIB_ASHRDI3 + select GENERIC_LIB_LSHRDI3 + select GENERIC_PCI_IOMAP if PCI + select GENERIC_SCHED_CLOCK + select GENERIC_SMP_IDLE_THREAD + select GUP_GET_PXX_LOW_HIGH if X2TLB + select HAS_IOPORT if HAS_IOPORT_MAP + select GENERIC_IOREMAP if MMU + select HAVE_ARCH_AUDITSYSCALL + select HAVE_ARCH_KGDB + select HAVE_ARCH_SECCOMP_FILTER select HAVE_ARCH_TRACEHOOK - select HAVE_PERF_EVENTS select HAVE_DEBUG_BUGVERBOSE - select HAVE_FAST_GUP if MMU - select ARCH_HAVE_CUSTOM_GPIO_H - select ARCH_HAVE_NMI_SAFE_CMPXCHG if (GUSA_RB || CPU_SH4A) - select ARCH_HAS_GCOV_PROFILE_ALL - select PERF_USE_VMALLOC select HAVE_DEBUG_KMEMLEAK - select HAVE_KERNEL_GZIP - select CPU_NO_EFFICIENT_FFS + select HAVE_DYNAMIC_FTRACE + select HAVE_FAST_GUP if MMU + select HAVE_FUNCTION_GRAPH_TRACER + select HAVE_FUNCTION_TRACER + select HAVE_FTRACE_MCOUNT_RECORD + select HAVE_HW_BREAKPOINT + select HAVE_IOREMAP_PROT if MMU && !X2TLB select HAVE_KERNEL_BZIP2 + select HAVE_KERNEL_GZIP select HAVE_KERNEL_LZMA - select HAVE_KERNEL_XZ select HAVE_KERNEL_LZO + select HAVE_KERNEL_XZ + select HAVE_KPROBES + select HAVE_KRETPROBES + select HAVE_MIXED_BREAKPOINTS_REGS + select HAVE_MOD_ARCH_SPECIFIC if DWARF_UNWINDER + select HAVE_NMI + select HAVE_PATA_PLATFORM + select HAVE_PERF_EVENTS + select HAVE_REGS_AND_STACK_ACCESS_API select HAVE_UID16 - select ARCH_WANT_IPC_PARSE_VERSION + select HAVE_SOFTIRQ_ON_OWN_STACK if IRQSTACKS + select HAVE_STACKPROTECTOR select HAVE_SYSCALL_TRACEPOINTS - select HAVE_REGS_AND_STACK_ACCESS_API - select MAY_HAVE_SPARSE_IRQ select IRQ_FORCED_THREADING - select RTC_LIB - select GENERIC_ATOMIC64 - select GENERIC_IRQ_SHOW - select GENERIC_SMP_IDLE_THREAD - select GENERIC_IDLE_POLL_SETUP - select GENERIC_CLOCKEVENTS - select GENERIC_CMOS_UPDATE if SH_SH03 || SH_DREAMCAST - select GENERIC_PCI_IOMAP if PCI - select GENERIC_SCHED_CLOCK - select GENERIC_STRNCPY_FROM_USER - select GENERIC_STRNLEN_USER - select HAVE_MOD_ARCH_SPECIFIC if DWARF_UNWINDER + select LOCK_MM_AND_FIND_VMA select MODULES_USE_ELF_RELA + select NEED_SG_DMA_LENGTH + select NO_DMA if !MMU && !DMA_COHERENT select NO_GENERIC_PCI_IOPORT_MAP if PCI - select OLD_SIGSUSPEND select OLD_SIGACTION + select OLD_SIGSUSPEND select PCI_DOMAINS if PCI - select HAVE_ARCH_AUDITSYSCALL - select HAVE_FUTEX_CMPXCHG if FUTEX - select HAVE_NMI - select NEED_SG_DMA_LENGTH - select ARCH_HAS_GIGANTIC_PAGE - + select PERF_EVENTS + select PERF_USE_VMALLOC + select RTC_LIB + select SPARSE_IRQ + select TRACE_IRQFLAGS_SUPPORT help The SuperH is a RISC processor targeted for use in embedded systems and consumer electronics; it was also used in the Sega Dreamcast gaming console. The SuperH port has a home page at <http://www.linux-sh.org/>. -config SUPERH32 - def_bool "$(ARCH)" = "sh" - select ARCH_32BIT_OFF_T - select GUP_GET_PTE_LOW_HIGH if X2TLB - select HAVE_KPROBES - select HAVE_KRETPROBES - select HAVE_IOREMAP_PROT if MMU && !X2TLB - select HAVE_FUNCTION_TRACER - select HAVE_FTRACE_MCOUNT_RECORD - select HAVE_DYNAMIC_FTRACE - select HAVE_FTRACE_NMI_ENTER if DYNAMIC_FTRACE - select ARCH_WANT_IPC_PARSE_VERSION - select HAVE_FUNCTION_GRAPH_TRACER - select HAVE_ARCH_KGDB - select HAVE_HW_BREAKPOINT - select HAVE_MIXED_BREAKPOINTS_REGS - select PERF_EVENTS - select ARCH_HIBERNATION_POSSIBLE if MMU - select SPARSE_IRQ - select HAVE_STACKPROTECTOR - -config SUPERH64 - def_bool "$(ARCH)" = "sh64" - select HAVE_EXIT_THREAD - select KALLSYMS - -config ARCH_DEFCONFIG - string - default "arch/sh/configs/shx3_defconfig" if SUPERH32 - default "arch/sh/configs/cayman_defconfig" if SUPERH64 - config GENERIC_BUG def_bool y - depends on BUG && SUPERH32 - -config GENERIC_CSUM - def_bool y - depends on SUPERH64 + depends on BUG config GENERIC_HWEIGHT def_bool y @@ -108,7 +92,7 @@ config GENERIC_CALIBRATE_DELAY config GENERIC_LOCKBREAK def_bool y - depends on SMP && PREEMPT + depends on SMP && PREEMPTION config ARCH_SUSPEND_POSSIBLE def_bool n @@ -120,9 +104,6 @@ config SYS_SUPPORTS_APM_EMULATION bool select ARCH_SUSPEND_POSSIBLE -config SYS_SUPPORTS_HUGETLBFS - bool - config SYS_SUPPORTS_SMP bool @@ -143,8 +124,7 @@ config ARCH_HAS_ILOG2_U64 config NO_IOPORT_MAP def_bool !PCI - depends on !SH_CAYMAN && !SH_SH4202_MICRODEV && !SH_SHMIN && \ - !SH_HP6XX && !SH_SOLUTION_ENGINE + depends on !SH_SHMIN && !SH_HP6XX && !SH_SOLUTION_ENGINE config IO_TRAPPED bool @@ -156,8 +136,10 @@ config DMA_COHERENT bool config DMA_NONCOHERENT - def_bool !DMA_COHERENT + def_bool !NO_DMA && !DMA_COHERENT + select ARCH_HAS_DMA_PREP_COHERENT select ARCH_HAS_SYNC_DMA_FOR_DEVICE + select DMA_DIRECT_REMAP config PGTABLE_LEVELS default 3 if X2TLB @@ -192,12 +174,12 @@ config CPU_SH3 config CPU_SH4 bool + select ARCH_SUPPORTS_HUGETLBFS if MMU select CPU_HAS_INTEVT select CPU_HAS_SR_RB select CPU_HAS_FPU if !CPU_SH4AL_DSP select SH_INTC select SYS_SUPPORTS_SH_TMU - select SYS_SUPPORTS_HUGETLBFS if MMU config CPU_SH4A bool @@ -208,12 +190,6 @@ config CPU_SH4AL_DSP select CPU_SH4A select CPU_HAS_DSP -config CPU_SH5 - bool - select CPU_HAS_FPU - select SYS_SUPPORTS_SH_TMU - select SYS_SUPPORTS_HUGETLBFS if MMU - config CPU_SHX2 bool @@ -233,8 +209,6 @@ config CPU_HAS_PMU default y bool -if SUPERH32 - choice prompt "Processor sub-type selection" @@ -409,10 +383,6 @@ config CPU_SUBTYPE_SH7760 bool "Support SH7760 processor" select CPU_SH4 -config CPU_SUBTYPE_SH4_202 - bool "Support SH4-202 processor" - select CPU_SH4 - # SH-4A Processor Support config CPU_SUBTYPE_SH7723 @@ -523,27 +493,6 @@ config CPU_SUBTYPE_SH7366 endchoice -endif - -if SUPERH64 - -choice - prompt "Processor sub-type selection" - -# SH-5 Processor Support - -config CPU_SUBTYPE_SH5_101 - bool "Support SH5-101 processor" - select CPU_SH5 - -config CPU_SUBTYPE_SH5_103 - bool "Support SH5-103 processor" - select CPU_SH5 - -endchoice - -endif - source "arch/sh/mm/Kconfig" source "arch/sh/Kconfig.cpu" @@ -564,7 +513,6 @@ config SH_PCLK_FREQ CPU_SUBTYPE_SH7263 || \ CPU_SUBTYPE_MXG default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R - default "66000000" if CPU_SUBTYPE_SH4_202 default "50000000" help This option is used to specify the peripheral clock frequency. @@ -595,49 +543,19 @@ menu "Kernel features" source "kernel/Kconfig.hz" -config KEXEC - bool "kexec system call (EXPERIMENTAL)" - depends on SUPERH32 && MMU - select KEXEC_CORE - help - kexec is a system call that implements the ability to shutdown your - current kernel, and to start another kernel. It is like a reboot - but it is independent of the system firmware. And like a reboot - you can start any kernel with it, not just Linux. - - The name comes from the similarity to the exec system call. +config ARCH_SUPPORTS_KEXEC + def_bool MMU - It is an ongoing process to be certain the hardware in a machine - is properly shutdown, so do not be surprised if this code does not - initially work for you. As of this writing the exact hardware - interface is strongly in flux, so no good recommendation can be - made. +config ARCH_SUPPORTS_CRASH_DUMP + def_bool BROKEN_ON_SMP -config CRASH_DUMP - bool "kernel crash dumps (EXPERIMENTAL)" - depends on SUPERH32 && BROKEN_ON_SMP - help - Generate crash dump after being started by kexec. - This should be normally only set in special crash dump kernels - which are loaded in the main kernel with kexec-tools into - a specially reserved region and then later executed after - a crash by kdump/kexec. The crash dump kernel must be compiled - to a memory address not used by the main kernel using - PHYSICAL_START. - - For more details see Documentation/admin-guide/kdump/kdump.rst - -config KEXEC_JUMP - bool "kexec jump (EXPERIMENTAL)" - depends on SUPERH32 && KEXEC && HIBERNATION - help - Jump between original kernel and kexeced kernel and invoke - code via KEXEC +config ARCH_SUPPORTS_KEXEC_JUMP + def_bool y config PHYSICAL_START hex "Physical address where the kernel is loaded" if (EXPERT || CRASH_DUMP) default MEMORY_START - ---help--- + help This gives the physical address where the kernel is loaded and is ordinarily the same as MEMORY_START. @@ -645,26 +563,10 @@ config PHYSICAL_START where the fail safe kernel needs to run at a different address than the panic-ed kernel. -config SECCOMP - bool "Enable seccomp to safely compute untrusted bytecode" - depends on PROC_FS - help - This kernel feature is useful for number crunching applications - that may need to compute untrusted bytecode during their - execution. By using pipes or other transports made available to - the process as file descriptors supporting the read/write - syscalls, it's possible to isolate those applications in - their own address space using seccomp. Once seccomp is - enabled via prctl, it cannot be disabled and the task is only - allowed to execute a few safe syscalls defined by each seccomp - mode. - - If unsure, say N. - config SMP bool "Symmetric multi-processing support" depends on SYS_SUPPORTS_SMP - ---help--- + help This enables support for systems with more than one CPU. If you have a system with only one CPU, say N. If you have a system with more than one CPU, say Y. @@ -679,7 +581,7 @@ config SMP Y to "Enhanced Real Time Clock Support", below. See also <file:Documentation/admin-guide/lockup-watchdogs.rst> and the SMP-HOWTO - available at <http://www.tldp.org/docs.html#howto>. + available at <https://www.tldp.org/docs.html#howto>. If you don't know what to do here, say N. @@ -706,7 +608,7 @@ config HOTPLUG_CPU config GUSA def_bool y - depends on !SMP && SUPERH32 + depends on !SMP help This enables support for gUSA (general UserSpace Atomicity). This is the default implementation for both UP and non-ll/sc @@ -775,7 +677,6 @@ config ZERO_PAGE_OFFSET config BOOT_LINK_OFFSET hex default "0x00210000" if SH_SHMIN - default "0x00400000" if SH_CAYMAN default "0x00810000" if SH_7780_SOLUTION_ENGINE default "0x009e0000" if SH_TITAN default "0x01800000" if SH_SDK7780 @@ -836,10 +737,6 @@ endmenu menu "Bus options" -config SUPERHYWAY - tristate "SuperHyway Bus support" - depends on CPU_SUBTYPE_SH4_202 - config MAPLE bool "Maple Bus support" depends on SH_DREAMCAST |