diff options
Diffstat (limited to 'arch/sh/Kconfig')
| -rw-r--r-- | arch/sh/Kconfig | 112 |
1 files changed, 30 insertions, 82 deletions
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 675fb7ceec26..834b67c4db5a 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -3,7 +3,7 @@ config SUPERH select ARCH_MIGHT_HAVE_PC_PARPORT select EXPERT select CLKDEV_LOOKUP - select HAVE_IDE if HAS_IOPORT + select HAVE_IDE if HAS_IOPORT_MAP select HAVE_MEMBLOCK select HAVE_MEMBLOCK_NODE_MAP select ARCH_DISCARD_MEMBLOCK @@ -67,6 +67,7 @@ config SUPERH32 select PERF_EVENTS select ARCH_HIBERNATION_POSSIBLE if MMU select SPARSE_IRQ + select HAVE_CC_STACKPROTECTOR config SUPERH64 def_bool ARCH = "sh64" @@ -123,15 +124,6 @@ config SYS_SUPPORTS_NUMA config SYS_SUPPORTS_PCI bool -config SYS_SUPPORTS_CMT - bool - -config SYS_SUPPORTS_MTU2 - bool - -config SYS_SUPPORTS_TMU - bool - config STACKTRACE_SUPPORT def_bool y @@ -147,7 +139,7 @@ config ARCH_HAS_ILOG2_U32 config ARCH_HAS_ILOG2_U64 def_bool n -config NO_IOPORT +config NO_IOPORT_MAP def_bool !PCI depends on !SH_CAYMAN && !SH_SH4202_MICRODEV && !SH_SHMIN && \ !SH_HP6XX && !SH_SOLUTION_ENGINE @@ -191,14 +183,14 @@ config CPU_SH3 bool select CPU_HAS_INTEVT select CPU_HAS_SR_RB - select SYS_SUPPORTS_TMU + select SYS_SUPPORTS_SH_TMU config CPU_SH4 bool select CPU_HAS_INTEVT select CPU_HAS_SR_RB select CPU_HAS_FPU if !CPU_SH4AL_DSP - select SYS_SUPPORTS_TMU + select SYS_SUPPORTS_SH_TMU select SYS_SUPPORTS_HUGETLBFS if MMU config CPU_SH4A @@ -213,7 +205,7 @@ config CPU_SH4AL_DSP config CPU_SH5 bool select CPU_HAS_FPU - select SYS_SUPPORTS_TMU + select SYS_SUPPORTS_SH_TMU select SYS_SUPPORTS_HUGETLBFS if MMU config CPU_SHX2 @@ -250,7 +242,7 @@ choice config CPU_SUBTYPE_SH7619 bool "Support SH7619 processor" select CPU_SH2 - select SYS_SUPPORTS_CMT + select SYS_SUPPORTS_SH_CMT # SH-2A Processor Support @@ -258,50 +250,50 @@ config CPU_SUBTYPE_SH7201 bool "Support SH7201 processor" select CPU_SH2A select CPU_HAS_FPU - select SYS_SUPPORTS_MTU2 + select SYS_SUPPORTS_SH_MTU2 config CPU_SUBTYPE_SH7203 bool "Support SH7203 processor" select CPU_SH2A select CPU_HAS_FPU - select SYS_SUPPORTS_CMT - select SYS_SUPPORTS_MTU2 + select SYS_SUPPORTS_SH_CMT + select SYS_SUPPORTS_SH_MTU2 select ARCH_WANT_OPTIONAL_GPIOLIB select PINCTRL config CPU_SUBTYPE_SH7206 bool "Support SH7206 processor" select CPU_SH2A - select SYS_SUPPORTS_CMT - select SYS_SUPPORTS_MTU2 + select SYS_SUPPORTS_SH_CMT + select SYS_SUPPORTS_SH_MTU2 config CPU_SUBTYPE_SH7263 bool "Support SH7263 processor" select CPU_SH2A select CPU_HAS_FPU - select SYS_SUPPORTS_CMT - select SYS_SUPPORTS_MTU2 + select SYS_SUPPORTS_SH_CMT + select SYS_SUPPORTS_SH_MTU2 config CPU_SUBTYPE_SH7264 bool "Support SH7264 processor" select CPU_SH2A select CPU_HAS_FPU - select SYS_SUPPORTS_CMT - select SYS_SUPPORTS_MTU2 + select SYS_SUPPORTS_SH_CMT + select SYS_SUPPORTS_SH_MTU2 select PINCTRL config CPU_SUBTYPE_SH7269 bool "Support SH7269 processor" select CPU_SH2A select CPU_HAS_FPU - select SYS_SUPPORTS_CMT - select SYS_SUPPORTS_MTU2 + select SYS_SUPPORTS_SH_CMT + select SYS_SUPPORTS_SH_MTU2 select PINCTRL config CPU_SUBTYPE_MXG bool "Support MX-G processor" select CPU_SH2A - select SYS_SUPPORTS_MTU2 + select SYS_SUPPORTS_SH_MTU2 help Select MX-G if running on an R8A03022BG part. @@ -354,9 +346,8 @@ config CPU_SUBTYPE_SH7720 bool "Support SH7720 processor" select CPU_SH3 select CPU_HAS_DSP - select SYS_SUPPORTS_CMT + select SYS_SUPPORTS_SH_CMT select ARCH_WANT_OPTIONAL_GPIOLIB - select USB_ARCH_HAS_OHCI select USB_OHCI_SH if USB_OHCI_HCD select PINCTRL help @@ -366,8 +357,7 @@ config CPU_SUBTYPE_SH7721 bool "Support SH7721 processor" select CPU_SH3 select CPU_HAS_DSP - select SYS_SUPPORTS_CMT - select USB_ARCH_HAS_OHCI + select SYS_SUPPORTS_SH_CMT select USB_OHCI_SH if USB_OHCI_HCD help Select SH7721 if you have a SH3-DSP SH7721 CPU. @@ -422,7 +412,7 @@ config CPU_SUBTYPE_SH7723 select CPU_SHX2 select ARCH_SHMOBILE select ARCH_SPARSEMEM_ENABLE - select SYS_SUPPORTS_CMT + select SYS_SUPPORTS_SH_CMT select ARCH_WANT_OPTIONAL_GPIOLIB select PINCTRL help @@ -434,7 +424,7 @@ config CPU_SUBTYPE_SH7724 select CPU_SHX2 select ARCH_SHMOBILE select ARCH_SPARSEMEM_ENABLE - select SYS_SUPPORTS_CMT + select SYS_SUPPORTS_SH_CMT select ARCH_WANT_OPTIONAL_GPIOLIB select PINCTRL help @@ -445,8 +435,6 @@ config CPU_SUBTYPE_SH7734 select CPU_SH4A select CPU_SHX2 select ARCH_WANT_OPTIONAL_GPIOLIB - select USB_ARCH_HAS_OHCI - select USB_ARCH_HAS_EHCI select PINCTRL help Select SH7734 if you have a SH4A SH7734 CPU. @@ -456,8 +444,6 @@ config CPU_SUBTYPE_SH7757 select CPU_SH4A select CPU_SHX2 select ARCH_WANT_OPTIONAL_GPIOLIB - select USB_ARCH_HAS_OHCI - select USB_ARCH_HAS_EHCI select PINCTRL help Select SH7757 if you have a SH4A SH7757 CPU. @@ -465,7 +451,6 @@ config CPU_SUBTYPE_SH7757 config CPU_SUBTYPE_SH7763 bool "Support SH7763 processor" select CPU_SH4A - select USB_ARCH_HAS_OHCI select USB_OHCI_SH if USB_OHCI_HCD help Select SH7763 if you have a SH4A SH7763(R5S77631) CPU. @@ -494,9 +479,7 @@ config CPU_SUBTYPE_SH7786 select CPU_HAS_PTEAEX select GENERIC_CLOCKEVENTS_BROADCAST if SMP select ARCH_WANT_OPTIONAL_GPIOLIB - select USB_ARCH_HAS_OHCI select USB_OHCI_SH if USB_OHCI_HCD - select USB_ARCH_HAS_EHCI select USB_EHCI_SH if USB_EHCI_HCD select PINCTRL @@ -514,7 +497,7 @@ config CPU_SUBTYPE_SH7343 bool "Support SH7343 processor" select CPU_SH4AL_DSP select ARCH_SHMOBILE - select SYS_SUPPORTS_CMT + select SYS_SUPPORTS_SH_CMT config CPU_SUBTYPE_SH7722 bool "Support SH7722 processor" @@ -523,7 +506,7 @@ config CPU_SUBTYPE_SH7722 select ARCH_SHMOBILE select ARCH_SPARSEMEM_ENABLE select SYS_SUPPORTS_NUMA - select SYS_SUPPORTS_CMT + select SYS_SUPPORTS_SH_CMT select ARCH_WANT_OPTIONAL_GPIOLIB select PINCTRL @@ -534,7 +517,7 @@ config CPU_SUBTYPE_SH7366 select ARCH_SHMOBILE select ARCH_SPARSEMEM_ENABLE select SYS_SUPPORTS_NUMA - select SYS_SUPPORTS_CMT + select SYS_SUPPORTS_SH_CMT endchoice @@ -567,27 +550,6 @@ source "arch/sh/boards/Kconfig" menu "Timer and clock configuration" -config SH_TIMER_TMU - bool "TMU timer driver" - depends on SYS_SUPPORTS_TMU - default y - help - This enables the build of the TMU timer driver. - -config SH_TIMER_CMT - bool "CMT timer driver" - depends on SYS_SUPPORTS_CMT - default y - help - This enables build of the CMT timer driver. - -config SH_TIMER_MTU2 - bool "MTU2 timer driver" - depends on SYS_SUPPORTS_MTU2 - default y - help - This enables build of the MTU2 timer driver. - config SH_PCLK_FREQ int "Peripheral clock frequency (in Hz)" depends on SH_CLK_CPG_LEGACY @@ -696,32 +658,18 @@ config SECCOMP If unsure, say N. -config CC_STACKPROTECTOR - bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)" - depends on SUPERH32 - help - This option turns on the -fstack-protector GCC feature. This - feature puts, at the beginning of functions, a canary value on - the stack just before the return address, and validates - the value just before actually returning. Stack based buffer - overflows (that need to overwrite this return address) now also - overwrite the canary, which gets detected and the attack is then - neutralized via a kernel panic. - - This feature requires gcc version 4.2 or above. - config SMP bool "Symmetric multi-processing support" depends on SYS_SUPPORTS_SMP ---help--- This enables support for systems with more than one CPU. If you have - a system with only one CPU, like most personal computers, say N. If - you have a system with more than one CPU, say Y. + a system with only one CPU, say N. If you have a system with more + than one CPU, say Y. - If you say N here, the kernel will run on single and multiprocessor + If you say N here, the kernel will run on uni- and multiprocessor machines, but will use only one CPU of a multiprocessor machine. If you say Y here, the kernel will run on many, but not all, - singleprocessor machines. On a singleprocessor machine, the kernel + uniprocessor machines. On a uniprocessor machine, the kernel will run faster if you say N here. People using multiprocessor machines who say Y here should also say |