summaryrefslogtreecommitdiff
path: root/arch/sh/boards
diff options
context:
space:
mode:
Diffstat (limited to 'arch/sh/boards')
-rw-r--r--arch/sh/boards/board-magicpanelr2.c74
-rw-r--r--arch/sh/boards/board-polaris.c22
-rw-r--r--arch/sh/boards/board-shmin.c4
-rw-r--r--arch/sh/boards/mach-ap325rxa/setup.c16
-rw-r--r--arch/sh/boards/mach-cayman/irq.c16
-rw-r--r--arch/sh/boards/mach-dreamcast/rtc.c20
-rw-r--r--arch/sh/boards/mach-ecovec24/setup.c20
-rw-r--r--arch/sh/boards/mach-highlander/irq-r7780mp.c2
-rw-r--r--arch/sh/boards/mach-highlander/irq-r7780rp.c2
-rw-r--r--arch/sh/boards/mach-highlander/irq-r7785rp.c16
-rw-r--r--arch/sh/boards/mach-highlander/psw.c4
-rw-r--r--arch/sh/boards/mach-highlander/setup.c14
-rw-r--r--arch/sh/boards/mach-hp6xx/hp6xx_apm.c2
-rw-r--r--arch/sh/boards/mach-hp6xx/pm.c38
-rw-r--r--arch/sh/boards/mach-hp6xx/setup.c12
-rw-r--r--arch/sh/boards/mach-kfr2r09/setup.c14
-rw-r--r--arch/sh/boards/mach-landisk/gio.c12
-rw-r--r--arch/sh/boards/mach-landisk/irq.c6
-rw-r--r--arch/sh/boards/mach-landisk/psw.c4
-rw-r--r--arch/sh/boards/mach-landisk/setup.c4
-rw-r--r--arch/sh/boards/mach-microdev/io.c4
-rw-r--r--arch/sh/boards/mach-microdev/irq.c10
-rw-r--r--arch/sh/boards/mach-migor/setup.c8
-rw-r--r--arch/sh/boards/mach-r2d/irq.c4
-rw-r--r--arch/sh/boards/mach-r2d/setup.c8
-rw-r--r--arch/sh/boards/mach-rsk/devices-rsk7203.c2
-rw-r--r--arch/sh/boards/mach-sdk7780/irq.c4
-rw-r--r--arch/sh/boards/mach-sdk7780/setup.c6
-rw-r--r--arch/sh/boards/mach-se/7206/io.c2
-rw-r--r--arch/sh/boards/mach-se/7206/irq.c40
-rw-r--r--arch/sh/boards/mach-se/7343/irq.c10
-rw-r--r--arch/sh/boards/mach-se/7343/setup.c6
-rw-r--r--arch/sh/boards/mach-se/770x/irq.c14
-rw-r--r--arch/sh/boards/mach-se/7721/irq.c2
-rw-r--r--arch/sh/boards/mach-se/7721/setup.c8
-rw-r--r--arch/sh/boards/mach-se/7722/irq.c10
-rw-r--r--arch/sh/boards/mach-se/7722/setup.c34
-rw-r--r--arch/sh/boards/mach-se/7724/irq.c20
-rw-r--r--arch/sh/boards/mach-se/7724/setup.c26
-rw-r--r--arch/sh/boards/mach-se/7780/irq.c18
-rw-r--r--arch/sh/boards/mach-se/7780/setup.c26
-rw-r--r--arch/sh/boards/mach-sh03/rtc.c50
-rw-r--r--arch/sh/boards/mach-sh7763rdp/irq.c10
-rw-r--r--arch/sh/boards/mach-sh7763rdp/setup.c40
-rw-r--r--arch/sh/boards/mach-snapgear/setup.c2
-rw-r--r--arch/sh/boards/mach-systemh/irq.c12
-rw-r--r--arch/sh/boards/mach-titan/io.c30
-rw-r--r--arch/sh/boards/mach-x3proto/ilsel.c8
-rw-r--r--arch/sh/boards/mach-x3proto/setup.c2
49 files changed, 359 insertions, 359 deletions
diff --git a/arch/sh/boards/board-magicpanelr2.c b/arch/sh/boards/board-magicpanelr2.c
index 99ffc5f1c0dd..efba450a0518 100644
--- a/arch/sh/boards/board-magicpanelr2.c
+++ b/arch/sh/boards/board-magicpanelr2.c
@@ -23,7 +23,7 @@
#include <asm/heartbeat.h>
#include <cpu/sh7720.h>
-#define LAN9115_READY (ctrl_inl(0xA8000084UL) & 0x00000001UL)
+#define LAN9115_READY (__raw_readl(0xA8000084UL) & 0x00000001UL)
/* Prefer cmdline over RedBoot */
static const char *probes[] = { "cmdlinepart", "RedBoot", NULL };
@@ -60,33 +60,33 @@ static void __init setup_chip_select(void)
{
/* CS2: LAN (0x08000000 - 0x0bffffff) */
/* no idle cycles, normal space, 8 bit data bus */
- ctrl_outl(0x36db0400, CS2BCR);
+ __raw_writel(0x36db0400, CS2BCR);
/* (SW:1.5 WR:3 HW:1.5), ext. wait */
- ctrl_outl(0x000003c0, CS2WCR);
+ __raw_writel(0x000003c0, CS2WCR);
/* CS4: CAN1 (0xb0000000 - 0xb3ffffff) */
/* no idle cycles, normal space, 8 bit data bus */
- ctrl_outl(0x00000200, CS4BCR);
+ __raw_writel(0x00000200, CS4BCR);
/* (SW:1.5 WR:3 HW:1.5), ext. wait */
- ctrl_outl(0x00100981, CS4WCR);
+ __raw_writel(0x00100981, CS4WCR);
/* CS5a: CAN2 (0xb4000000 - 0xb5ffffff) */
/* no idle cycles, normal space, 8 bit data bus */
- ctrl_outl(0x00000200, CS5ABCR);
+ __raw_writel(0x00000200, CS5ABCR);
/* (SW:1.5 WR:3 HW:1.5), ext. wait */
- ctrl_outl(0x00100981, CS5AWCR);
+ __raw_writel(0x00100981, CS5AWCR);
/* CS5b: CAN3 (0xb6000000 - 0xb7ffffff) */
/* no idle cycles, normal space, 8 bit data bus */
- ctrl_outl(0x00000200, CS5BBCR);
+ __raw_writel(0x00000200, CS5BBCR);
/* (SW:1.5 WR:3 HW:1.5), ext. wait */
- ctrl_outl(0x00100981, CS5BWCR);
+ __raw_writel(0x00100981, CS5BWCR);
/* CS6a: Rotary (0xb8000000 - 0xb9ffffff) */
/* no idle cycles, normal space, 8 bit data bus */
- ctrl_outl(0x00000200, CS6ABCR);
+ __raw_writel(0x00000200, CS6ABCR);
/* (SW:1.5 WR:3 HW:1.5), no ext. wait */
- ctrl_outl(0x001009C1, CS6AWCR);
+ __raw_writel(0x001009C1, CS6AWCR);
}
static void __init setup_port_multiplexing(void)
@@ -94,71 +94,71 @@ static void __init setup_port_multiplexing(void)
/* A7 GPO(LED8); A6 GPO(LED7); A5 GPO(LED6); A4 GPO(LED5);
* A3 GPO(LED4); A2 GPO(LED3); A1 GPO(LED2); A0 GPO(LED1);
*/
- ctrl_outw(0x5555, PORT_PACR); /* 01 01 01 01 01 01 01 01 */
+ __raw_writew(0x5555, PORT_PACR); /* 01 01 01 01 01 01 01 01 */
/* B7 GPO(RST4); B6 GPO(RST3); B5 GPO(RST2); B4 GPO(RST1);
* B3 GPO(PB3); B2 GPO(PB2); B1 GPO(PB1); B0 GPO(PB0);
*/
- ctrl_outw(0x5555, PORT_PBCR); /* 01 01 01 01 01 01 01 01 */
+ __raw_writew(0x5555, PORT_PBCR); /* 01 01 01 01 01 01 01 01 */
/* C7 GPO(PC7); C6 GPO(PC6); C5 GPO(PC5); C4 GPO(PC4);
* C3 LCD_DATA3; C2 LCD_DATA2; C1 LCD_DATA1; C0 LCD_DATA0;
*/
- ctrl_outw(0x5500, PORT_PCCR); /* 01 01 01 01 00 00 00 00 */
+ __raw_writew(0x5500, PORT_PCCR); /* 01 01 01 01 00 00 00 00 */
/* D7 GPO(PD7); D6 GPO(PD6); D5 GPO(PD5); D4 GPO(PD4);
* D3 GPO(PD3); D2 GPO(PD2); D1 GPO(PD1); D0 GPO(PD0);
*/
- ctrl_outw(0x5555, PORT_PDCR); /* 01 01 01 01 01 01 01 01 */
+ __raw_writew(0x5555, PORT_PDCR); /* 01 01 01 01 01 01 01 01 */
/* E7 (x); E6 GPI(nu); E5 GPI(nu); E4 LCD_M_DISP;
* E3 LCD_CL1; E2 LCD_CL2; E1 LCD_DON; E0 LCD_FLM;
*/
- ctrl_outw(0x3C00, PORT_PECR); /* 00 11 11 00 00 00 00 00 */
+ __raw_writew(0x3C00, PORT_PECR); /* 00 11 11 00 00 00 00 00 */
/* F7 (x); F6 DA1(VLCD); F5 DA0(nc); F4 AN3;
* F3 AN2(MID_AD); F2 AN1(EARTH_AD); F1 AN0(TEMP); F0 GPI+(nc);
*/
- ctrl_outw(0x0002, PORT_PFCR); /* 00 00 00 00 00 00 00 10 */
+ __raw_writew(0x0002, PORT_PFCR); /* 00 00 00 00 00 00 00 10 */
/* G7 (x); G6 IRQ5(TOUCH_BUSY); G5 IRQ4(TOUCH_IRQ); G4 GPI(KEY2);
* G3 GPI(KEY1); G2 GPO(LED11); G1 GPO(LED10); G0 GPO(LED9);
*/
- ctrl_outw(0x03D5, PORT_PGCR); /* 00 00 00 11 11 01 01 01 */
+ __raw_writew(0x03D5, PORT_PGCR); /* 00 00 00 11 11 01 01 01 */
/* H7 (x); H6 /RAS(BRAS); H5 /CAS(BCAS); H4 CKE(BCKE);
* H3 GPO(EARTH_OFF); H2 GPO(EARTH_TEST); H1 USB2_PWR; H0 USB1_PWR;
*/
- ctrl_outw(0x0050, PORT_PHCR); /* 00 00 00 00 01 01 00 00 */
+ __raw_writew(0x0050, PORT_PHCR); /* 00 00 00 00 01 01 00 00 */
/* J7 (x); J6 AUDCK; J5 ASEBRKAK; J4 AUDATA3;
* J3 AUDATA2; J2 AUDATA1; J1 AUDATA0; J0 AUDSYNC;
*/
- ctrl_outw(0x0000, PORT_PJCR); /* 00 00 00 00 00 00 00 00 */
+ __raw_writew(0x0000, PORT_PJCR); /* 00 00 00 00 00 00 00 00 */
/* K7 (x); K6 (x); K5 (x); K4 (x);
* K3 PINT7(/PWR2); K2 PINT6(/PWR1); K1 PINT5(nu); K0 PINT4(FLASH_READY)
*/
- ctrl_outw(0x00FF, PORT_PKCR); /* 00 00 00 00 11 11 11 11 */
+ __raw_writew(0x00FF, PORT_PKCR); /* 00 00 00 00 11 11 11 11 */
/* L7 TRST; L6 TMS; L5 TDO; L4 TDI;
* L3 TCK; L2 (x); L1 (x); L0 (x);
*/
- ctrl_outw(0x0000, PORT_PLCR); /* 00 00 00 00 00 00 00 00 */
+ __raw_writew(0x0000, PORT_PLCR); /* 00 00 00 00 00 00 00 00 */
/* M7 GPO(CURRENT_SINK); M6 GPO(PWR_SWITCH); M5 GPO(LAN_SPEED);
* M4 GPO(LAN_RESET); M3 GPO(BUZZER); M2 GPO(LCD_BL);
* M1 CS5B(CAN3_CS); M0 GPI+(nc);
*/
- ctrl_outw(0x5552, PORT_PMCR); /* 01 01 01 01 01 01 00 10 */
+ __raw_writew(0x5552, PORT_PMCR); /* 01 01 01 01 01 01 00 10 */
/* CURRENT_SINK=off, PWR_SWITCH=off, LAN_SPEED=100MBit,
* LAN_RESET=off, BUZZER=off, LCD_BL=off
*/
#if CONFIG_SH_MAGIC_PANEL_R2_VERSION == 2
- ctrl_outb(0x30, PORT_PMDR);
+ __raw_writeb(0x30, PORT_PMDR);
#elif CONFIG_SH_MAGIC_PANEL_R2_VERSION == 3
- ctrl_outb(0xF0, PORT_PMDR);
+ __raw_writeb(0xF0, PORT_PMDR);
#else
#error Unknown revision of PLATFORM_MP_R2
#endif
@@ -167,8 +167,8 @@ static void __init setup_port_multiplexing(void)
* P4 GPO(nu); P3 IRQ3(LAN_IRQ); P2 IRQ2(CAN3_IRQ);
* P1 IRQ1(CAN2_IRQ); P0 IRQ0(CAN1_IRQ)
*/
- ctrl_outw(0x0100, PORT_PPCR); /* 00 00 00 01 00 00 00 00 */
- ctrl_outb(0x10, PORT_PPDR);
+ __raw_writew(0x0100, PORT_PPCR); /* 00 00 00 01 00 00 00 00 */
+ __raw_writeb(0x10, PORT_PPDR);
/* R7 A25; R6 A24; R5 A23; R4 A22;
* R3 A21; R2 A20; R1 A19; R0 A0;
@@ -185,22 +185,22 @@ static void __init setup_port_multiplexing(void)
/* S7 (x); S6 (x); S5 (x); S4 GPO(EEPROM_CS2);
* S3 GPO(EEPROM_CS1); S2 SIOF0_TXD; S1 SIOF0_RXD; S0 SIOF0_SCK;
*/
- ctrl_outw(0x0140, PORT_PSCR); /* 00 00 00 01 01 00 00 00 */
+ __raw_writew(0x0140, PORT_PSCR); /* 00 00 00 01 01 00 00 00 */
/* T7 (x); T6 (x); T5 (x); T4 COM1_CTS;
* T3 COM1_RTS; T2 COM1_TXD; T1 COM1_RXD; T0 GPO(WDOG)
*/
- ctrl_outw(0x0001, PORT_PTCR); /* 00 00 00 00 00 00 00 01 */
+ __raw_writew(0x0001, PORT_PTCR); /* 00 00 00 00 00 00 00 01 */
/* U7 (x); U6 (x); U5 (x); U4 GPI+(/AC_FAULT);
* U3 GPO(TOUCH_CS); U2 TOUCH_TXD; U1 TOUCH_RXD; U0 TOUCH_SCK;
*/
- ctrl_outw(0x0240, PORT_PUCR); /* 00 00 00 10 01 00 00 00 */
+ __raw_writew(0x0240, PORT_PUCR); /* 00 00 00 10 01 00 00 00 */
/* V7 (x); V6 (x); V5 (x); V4 GPO(MID2);
* V3 GPO(MID1); V2 CARD_TxD; V1 CARD_RxD; V0 GPI+(/BAT_FAULT);
*/
- ctrl_outw(0x0142, PORT_PVCR); /* 00 00 00 01 01 00 00 10 */
+ __raw_writew(0x0142, PORT_PVCR); /* 00 00 00 01 01 00 00 10 */
}
static void __init mpr2_setup(char **cmdline_p)
@@ -209,24 +209,24 @@ static void __init mpr2_setup(char **cmdline_p)
* /PCC_CD1, /PCC_CD2, PCC_BVD1, PCC_BVD2,
* /IOIS16, IRQ4, IRQ5, USB1d_SUSPEND
*/
- ctrl_outw(0xAABC, PORT_PSELA);
+ __raw_writew(0xAABC, PORT_PSELA);
/* set Pin Select Register B:
* /SCIF0_RTS, /SCIF0_CTS, LCD_VCPWC,
* LCD_VEPWC, IIC_SDA, IIC_SCL, Reserved
*/
- ctrl_outw(0x3C00, PORT_PSELB);
+ __raw_writew(0x3C00, PORT_PSELB);
/* set Pin Select Register C:
* SIOF1_SCK, SIOF1_RxD, SCIF1_RxD, SCIF1_TxD, Reserved
*/
- ctrl_outw(0x0000, PORT_PSELC);
+ __raw_writew(0x0000, PORT_PSELC);
/* set Pin Select Register D: Reserved, SIOF1_TxD, Reserved, SIOF1_MCLK,
* Reserved, SIOF1_SYNC, Reserved, SCIF1_SCK, Reserved
*/
- ctrl_outw(0x0000, PORT_PSELD);
+ __raw_writew(0x0000, PORT_PSELD);
/* set USB TxRx Control: Reserved, DRV, Reserved, USB_TRANS, USB_SEL */
- ctrl_outw(0x0101, PORT_UTRCTL);
+ __raw_writew(0x0101, PORT_UTRCTL);
/* set USB Clock Control: USSCS, USSTB, Reserved (HighByte always A5) */
- ctrl_outw(0xA5C0, PORT_UCLKCR_W);
+ __raw_writew(0xA5C0, PORT_UCLKCR_W);
setup_chip_select();
diff --git a/arch/sh/boards/board-polaris.c b/arch/sh/boards/board-polaris.c
index 5bc126900ce3..594866356c24 100644
--- a/arch/sh/boards/board-polaris.c
+++ b/arch/sh/boards/board-polaris.c
@@ -89,15 +89,15 @@ static int __init polaris_initialise(void)
printk(KERN_INFO "Configuring Polaris external bus\n");
/* Configure area 5 with 2 wait states */
- wcr = ctrl_inw(WCR2);
+ wcr = __raw_readw(WCR2);
wcr &= (~AREA5_WAIT_CTRL);
wcr |= (WAIT_STATES_10 << 10);
- ctrl_outw(wcr, WCR2);
+ __raw_writew(wcr, WCR2);
/* Configure area 5 for 32-bit access */
- bcr_mask = ctrl_inw(BCR2);
+ bcr_mask = __raw_readw(BCR2);
bcr_mask |= 1 << 10;
- ctrl_outw(bcr_mask, BCR2);
+ __raw_writew(bcr_mask, BCR2);
return platform_add_devices(polaris_devices,
ARRAY_SIZE(polaris_devices));
@@ -128,13 +128,13 @@ static struct ipr_desc ipr_irq_desc = {
static void __init init_polaris_irq(void)
{
/* Disable all interrupts */
- ctrl_outw(0, BCR_ILCRA);
- ctrl_outw(0, BCR_ILCRB);
- ctrl_outw(0, BCR_ILCRC);
- ctrl_outw(0, BCR_ILCRD);
- ctrl_outw(0, BCR_ILCRE);
- ctrl_outw(0, BCR_ILCRF);
- ctrl_outw(0, BCR_ILCRG);
+ __raw_writew(0, BCR_ILCRA);
+ __raw_writew(0, BCR_ILCRB);
+ __raw_writew(0, BCR_ILCRC);
+ __raw_writew(0, BCR_ILCRD);
+ __raw_writew(0, BCR_ILCRE);
+ __raw_writew(0, BCR_ILCRF);
+ __raw_writew(0, BCR_ILCRG);
register_ipr_controller(&ipr_irq_desc);
}
diff --git a/arch/sh/boards/board-shmin.c b/arch/sh/boards/board-shmin.c
index b1dcbbc89188..325bed53b87e 100644
--- a/arch/sh/boards/board-shmin.c
+++ b/arch/sh/boards/board-shmin.c
@@ -17,8 +17,8 @@
static void __init init_shmin_irq(void)
{
- ctrl_outw(0x2a00, PFC_PHCR); // IRQ0-3=IRQ
- ctrl_outw(0x0aaa, INTC_ICR1); // IRQ0-3=IRQ-mode,Low-active.
+ __raw_writew(0x2a00, PFC_PHCR); // IRQ0-3=IRQ
+ __raw_writew(0x0aaa, INTC_ICR1); // IRQ0-3=IRQ-mode,Low-active.
plat_irq_setup_pins(IRQ_MODE_IRQ);
}
diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c
index 1f5fa5c44f6d..27277cbdb636 100644
--- a/arch/sh/boards/mach-ap325rxa/setup.c
+++ b/arch/sh/boards/mach-ap325rxa/setup.c
@@ -159,21 +159,21 @@ static void ap320_wvga_power_on(void *board_data)
msleep(100);
/* ASD AP-320/325 LCD ON */
- ctrl_outw(FPGA_LCDREG_VAL, FPGA_LCDREG);
+ __raw_writew(FPGA_LCDREG_VAL, FPGA_LCDREG);
/* backlight */
gpio_set_value(GPIO_PTS3, 0);
- ctrl_outw(0x100, FPGA_BKLREG);
+ __raw_writew(0x100, FPGA_BKLREG);
}
static void ap320_wvga_power_off(void *board_data)
{
/* backlight */
- ctrl_outw(0, FPGA_BKLREG);
+ __raw_writew(0, FPGA_BKLREG);
gpio_set_value(GPIO_PTS3, 1);
/* ASD AP-320/325 LCD OFF */
- ctrl_outw(0, FPGA_LCDREG);
+ __raw_writew(0, FPGA_LCDREG);
}
static struct sh_mobile_lcdc_info lcdc_info = {
@@ -595,7 +595,7 @@ static int __init ap325rxa_devices_setup(void)
gpio_request(GPIO_PTZ4, NULL);
gpio_direction_output(GPIO_PTZ4, 0); /* SADDR */
- ctrl_outw(ctrl_inw(PORT_MSELCRB) & ~0x0001, PORT_MSELCRB);
+ __raw_writew(__raw_readw(PORT_MSELCRB) & ~0x0001, PORT_MSELCRB);
/* FLCTL */
gpio_request(GPIO_FN_FCE, NULL);
@@ -613,9 +613,9 @@ static int __init ap325rxa_devices_setup(void)
gpio_request(GPIO_FN_FWE, NULL);
gpio_request(GPIO_FN_FRB, NULL);
- ctrl_outw(0, PORT_HIZCRC);
- ctrl_outw(0xFFFF, PORT_DRVCRA);
- ctrl_outw(0xFFFF, PORT_DRVCRB);
+ __raw_writew(0, PORT_HIZCRC);
+ __raw_writew(0xFFFF, PORT_DRVCRA);
+ __raw_writew(0xFFFF, PORT_DRVCRB);
platform_resource_setup_memory(&ceu_device, "ceu", 4 << 20);
diff --git a/arch/sh/boards/mach-cayman/irq.c b/arch/sh/boards/mach-cayman/irq.c
index 33f770856319..1394b078db36 100644
--- a/arch/sh/boards/mach-cayman/irq.c
+++ b/arch/sh/boards/mach-cayman/irq.c
@@ -66,9 +66,9 @@ static void enable_cayman_irq(unsigned int irq)
reg = EPLD_MASK_BASE + ((irq / 8) << 2);
bit = 1<<(irq % 8);
local_irq_save(flags);
- mask = ctrl_inl(reg);
+ mask = __raw_readl(reg);
mask |= bit;
- ctrl_outl(mask, reg);
+ __raw_writel(mask, reg);
local_irq_restore(flags);
}
@@ -83,9 +83,9 @@ void disable_cayman_irq(unsigned int irq)
reg = EPLD_MASK_BASE + ((irq / 8) << 2);
bit = 1<<(irq % 8);
local_irq_save(flags);
- mask = ctrl_inl(reg);
+ mask = __raw_readl(reg);
mask &= ~bit;
- ctrl_outl(mask, reg);
+ __raw_writel(mask, reg);
local_irq_restore(flags);
}
@@ -109,8 +109,8 @@ int cayman_irq_demux(int evt)
unsigned long status;
int i;
- status = ctrl_inl(EPLD_STATUS_BASE) &
- ctrl_inl(EPLD_MASK_BASE) & 0xff;
+ status = __raw_readl(EPLD_STATUS_BASE) &
+ __raw_readl(EPLD_MASK_BASE) & 0xff;
if (status == 0) {
irq = -1;
} else {
@@ -126,8 +126,8 @@ int cayman_irq_demux(int evt)
unsigned long status;
int i;
- status = ctrl_inl(EPLD_STATUS_BASE + 3 * sizeof(u32)) &
- ctrl_inl(EPLD_MASK_BASE + 3 * sizeof(u32)) & 0xff;
+ status = __raw_readl(EPLD_STATUS_BASE + 3 * sizeof(u32)) &
+ __raw_readl(EPLD_MASK_BASE + 3 * sizeof(u32)) & 0xff;
if (status == 0) {
irq = -1;
} else {
diff --git a/arch/sh/boards/mach-dreamcast/rtc.c b/arch/sh/boards/mach-dreamcast/rtc.c
index a7433685798d..061d65714fcc 100644
--- a/arch/sh/boards/mach-dreamcast/rtc.c
+++ b/arch/sh/boards/mach-dreamcast/rtc.c
@@ -35,11 +35,11 @@ static void aica_rtc_gettimeofday(struct timespec *ts)
unsigned long val1, val2;
do {
- val1 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) |
- (ctrl_inl(AICA_RTC_SECS_L) & 0xffff);
+ val1 = ((__raw_readl(AICA_RTC_SECS_H) & 0xffff) << 16) |
+ (__raw_readl(AICA_RTC_SECS_L) & 0xffff);
- val2 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) |
- (ctrl_inl(AICA_RTC_SECS_L) & 0xffff);
+ val2 = ((__raw_readl(AICA_RTC_SECS_H) & 0xffff) << 16) |
+ (__raw_readl(AICA_RTC_SECS_L) & 0xffff);
} while (val1 != val2);
ts->tv_sec = val1 - TWENTY_YEARS;
@@ -60,14 +60,14 @@ static int aica_rtc_settimeofday(const time_t secs)
unsigned long adj = secs + TWENTY_YEARS;
do {
- ctrl_outl((adj & 0xffff0000) >> 16, AICA_RTC_SECS_H);
- ctrl_outl((adj & 0xffff), AICA_RTC_SECS_L);
+ __raw_writel((adj & 0xffff0000) >> 16, AICA_RTC_SECS_H);
+ __raw_writel((adj & 0xffff), AICA_RTC_SECS_L);
- val1 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) |
- (ctrl_inl(AICA_RTC_SECS_L) & 0xffff);
+ val1 = ((__raw_readl(AICA_RTC_SECS_H) & 0xffff) << 16) |
+ (__raw_readl(AICA_RTC_SECS_L) & 0xffff);
- val2 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) |
- (ctrl_inl(AICA_RTC_SECS_L) & 0xffff);
+ val2 = ((__raw_readl(AICA_RTC_SECS_H) & 0xffff) << 16) |
+ (__raw_readl(AICA_RTC_SECS_L) & 0xffff);
} while (val1 != val2);
return 0;
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index a49cce16e783..1135c3b848f2 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -696,13 +696,13 @@ static struct platform_device camera_devices[] = {
#define FCLKBCR 0xa415000c
static void fsimck_init(struct clk *clk)
{
- u32 status = ctrl_inl(clk->enable_reg);
+ u32 status = __raw_readl(clk->enable_reg);
/* use external clock */
status &= ~0x000000ff;
status |= 0x00000080;
- ctrl_outl(status, clk->enable_reg);
+ __raw_writel(status, clk->enable_reg);
}
static struct clk_ops fsimck_clk_ops = {
@@ -853,7 +853,7 @@ static int __init arch_setup(void)
gpio_direction_output(GPIO_PTG1, 0);
gpio_direction_output(GPIO_PTG2, 0);
gpio_direction_output(GPIO_PTG3, 0);
- ctrl_outw((ctrl_inw(PORT_HIZA) & ~(0x1 << 1)) , PORT_HIZA);
+ __raw_writew((__raw_readw(PORT_HIZA) & ~(0x1 << 1)) , PORT_HIZA);
/* enable SH-Eth */
gpio_request(GPIO_PTA1, NULL);
@@ -873,16 +873,16 @@ static int __init arch_setup(void)
gpio_request(GPIO_FN_LNKSTA, NULL);
/* enable USB */
- ctrl_outw(0x0000, 0xA4D80000);
- ctrl_outw(0x0000, 0xA4D90000);
+ __raw_writew(0x0000, 0xA4D80000);
+ __raw_writew(0x0000, 0xA4D90000);
gpio_request(GPIO_PTB3, NULL);
gpio_request(GPIO_PTB4, NULL);
gpio_request(GPIO_PTB5, NULL);
gpio_direction_input(GPIO_PTB3);
gpio_direction_output(GPIO_PTB4, 0);
gpio_direction_output(GPIO_PTB5, 0);
- ctrl_outw(0x0600, 0xa40501d4);
- ctrl_outw(0x0600, 0xa4050192);
+ __raw_writew(0x0600, 0xa40501d4);
+ __raw_writew(0x0600, 0xa4050192);
if (gpio_get_value(GPIO_PTB3)) {
printk(KERN_INFO "USB1 function is selected\n");
@@ -923,7 +923,7 @@ static int __init arch_setup(void)
gpio_request(GPIO_FN_LCDVSYN, NULL);
gpio_request(GPIO_FN_LCDDON, NULL);
gpio_request(GPIO_FN_LCDLCLK, NULL);
- ctrl_outw((ctrl_inw(PORT_HIZA) & ~0x0001), PORT_HIZA);
+ __raw_writew((__raw_readw(PORT_HIZA) & ~0x0001), PORT_HIZA);
gpio_request(GPIO_PTE6, NULL);
gpio_request(GPIO_PTU1, NULL);
@@ -935,7 +935,7 @@ static int __init arch_setup(void)
gpio_direction_output(GPIO_PTA2, 0);
/* I/O buffer drive ability is high */
- ctrl_outw((ctrl_inw(IODRIVEA) & ~0x00c0) | 0x0080 , IODRIVEA);
+ __raw_writew((__raw_readw(IODRIVEA) & ~0x00c0) | 0x0080 , IODRIVEA);
if (gpio_get_value(GPIO_PTE6)) {
/* DVI */
@@ -1067,7 +1067,7 @@ static int __init arch_setup(void)
gpio_direction_output(GPIO_PTB7, 0);
/* I/O buffer drive ability is high for SDHI1 */
- ctrl_outw((ctrl_inw(IODRIVEA) & ~0x3000) | 0x2000 , IODRIVEA);
+ __raw_writew((__raw_readw(IODRIVEA) & ~0x3000) | 0x2000 , IODRIVEA);
#else
/* enable MSIOF0 on CN11 (needs DS2.4 set to OFF) */
gpio_request(GPIO_FN_MSIOF0_TXD, NULL);
diff --git a/arch/sh/boards/mach-highlander/irq-r7780mp.c b/arch/sh/boards/mach-highlander/irq-r7780mp.c
index 83c28bcd4d2a..9893fd3a1358 100644
--- a/arch/sh/boards/mach-highlander/irq-r7780mp.c
+++ b/arch/sh/boards/mach-highlander/irq-r7780mp.c
@@ -64,7 +64,7 @@ static DECLARE_INTC_DESC(intc_desc, "r7780mp", vectors,
unsigned char * __init highlander_plat_irq_setup(void)
{
- if ((ctrl_inw(0xa4000700) & 0xf000) == 0x2000) {
+ if ((__raw_readw(0xa4000700) & 0xf000) == 0x2000) {
printk(KERN_INFO "Using r7780mp interrupt controller.\n");
register_intc_controller(&intc_desc);
return irl2irq;
diff --git a/arch/sh/boards/mach-highlander/irq-r7780rp.c b/arch/sh/boards/mach-highlander/irq-r7780rp.c
index b721e86b5af4..0805b2151452 100644
--- a/arch/sh/boards/mach-highlander/irq-r7780rp.c
+++ b/arch/sh/boards/mach-highlander/irq-r7780rp.c
@@ -57,7 +57,7 @@ static DECLARE_INTC_DESC(intc_desc, "r7780rp", vectors,
unsigned char * __init highlander_plat_irq_setup(void)
{
- if (ctrl_inw(0xa5000600)) {
+ if (__raw_readw(0xa5000600)) {
printk(KERN_INFO "Using r7780rp interrupt controller.\n");
register_intc_controller(&intc_desc);
return irl2irq;
diff --git a/arch/sh/boards/mach-highlander/irq-r7785rp.c b/arch/sh/boards/mach-highlander/irq-r7785rp.c
index 3811b060a39b..558b24862776 100644
--- a/arch/sh/boards/mach-highlander/irq-r7785rp.c
+++ b/arch/sh/boards/mach-highlander/irq-r7785rp.c
@@ -66,20 +66,20 @@ static DECLARE_INTC_DESC(intc_desc, "r7785rp", vectors,
unsigned char * __init highlander_plat_irq_setup(void)
{
- if ((ctrl_inw(0xa4000158) & 0xf000) != 0x1000)
+ if ((__raw_readw(0xa4000158) & 0xf000) != 0x1000)
return NULL;
printk(KERN_INFO "Using r7785rp interrupt controller.\n");
- ctrl_outw(0x0000, PA_IRLSSR1); /* FPGA IRLSSR1(CF_CD clear) */
+ __raw_writew(0x0000, PA_IRLSSR1); /* FPGA IRLSSR1(CF_CD clear) */
/* Setup the FPGA IRL */
- ctrl_outw(0x0000, PA_IRLPRA); /* FPGA IRLA */
- ctrl_outw(0xe598, PA_IRLPRB); /* FPGA IRLB */
- ctrl_outw(0x7060, PA_IRLPRC); /* FPGA IRLC */
- ctrl_outw(0x0000, PA_IRLPRD); /* FPGA IRLD */
- ctrl_outw(0x4321, PA_IRLPRE); /* FPGA IRLE */
- ctrl_outw(0xdcba, PA_IRLPRF); /* FPGA IRLF */
+ __raw_writew(0x0000, PA_IRLPRA); /* FPGA IRLA */
+ __raw_writew(0xe598, PA_IRLPRB); /* FPGA IRLB */
+ __raw_writew(0x7060, PA_IRLPRC); /* FPGA IRLC */
+ __raw_writew(0x0000, PA_IRLPRD); /* FPGA IRLD */
+ __raw_writew(0x4321, PA_IRLPRE); /* FPGA IRLE */
+ __raw_writew(0xdcba, PA_IRLPRF); /* FPGA IRLF */
register_intc_controller(&intc_desc);
return irl2irq;
diff --git a/arch/sh/boards/mach-highlander/psw.c b/arch/sh/boards/mach-highlander/psw.c
index 37b1a2ee71a5..522786318d36 100644
--- a/arch/sh/boards/mach-highlander/psw.c
+++ b/arch/sh/boards/mach-highlander/psw.c
@@ -24,7 +24,7 @@ static irqreturn_t psw_irq_handler(int irq, void *arg)
unsigned int l, mask;
int ret = 0;
- l = ctrl_inw(PA_DBSW);
+ l = __raw_readw(PA_DBSW);
/* Nothing to do if there's no state change */
if (psw->state) {
@@ -45,7 +45,7 @@ static irqreturn_t psw_irq_handler(int irq, void *arg)
out:
/* Clear the switch IRQs */
l |= (0x7 << 12);
- ctrl_outw(l, PA_DBSW);
+ __raw_writew(l, PA_DBSW);
return IRQ_RETVAL(ret);
}
diff --git a/arch/sh/boards/mach-highlander/setup.c b/arch/sh/boards/mach-highlander/setup.c
index f663c14d8885..affd66747ba3 100644
--- a/arch/sh/boards/mach-highlander/setup.c
+++ b/arch/sh/boards/mach-highlander/setup.c
@@ -311,13 +311,13 @@ device_initcall(r7780rp_devices_setup);
*/
static int ivdr_clk_enable(struct clk *clk)
{
- ctrl_outw(ctrl_inw(PA_IVDRCTL) | (1 << IVDR_CK_ON), PA_IVDRCTL);
+ __raw_writew(__raw_readw(PA_IVDRCTL) | (1 << IVDR_CK_ON), PA_IVDRCTL);
return 0;
}
static void ivdr_clk_disable(struct clk *clk)
{
- ctrl_outw(ctrl_inw(PA_IVDRCTL) & ~(1 << IVDR_CK_ON), PA_IVDRCTL);
+ __raw_writew(__raw_readw(PA_IVDRCTL) & ~(1 << IVDR_CK_ON), PA_IVDRCTL);
}
static struct clk_ops ivdr_clk_ops = {
@@ -337,7 +337,7 @@ static struct clk *r7780rp_clocks[] = {
static void r7780rp_power_off(void)
{
if (mach_is_r7780mp() || mach_is_r7785rp())
- ctrl_outw(0x0001, PA_POFF);
+ __raw_writew(0x0001, PA_POFF);
}
/*
@@ -345,7 +345,7 @@ static void r7780rp_power_off(void)
*/
static void __init highlander_setup(char **cmdline_p)
{
- u16 ver = ctrl_inw(PA_VERREG);
+ u16 ver = __raw_readw(PA_VERREG);
int i;
printk(KERN_INFO "Renesas Solutions Highlander %s support.\n",
@@ -370,12 +370,12 @@ static void __init highlander_setup(char **cmdline_p)
clk_enable(clk);
}
- ctrl_outw(0x0000, PA_OBLED); /* Clear LED. */
+ __raw_writew(0x0000, PA_OBLED); /* Clear LED. */
if (mach_is_r7780rp())
- ctrl_outw(0x0001, PA_SDPOW); /* SD Power ON */
+ __raw_writew(0x0001, PA_SDPOW); /* SD Power ON */
- ctrl_outw(ctrl_inw(PA_IVDRCTL) | 0x01, PA_IVDRCTL); /* Si13112 */
+ __raw_writew(__raw_readw(PA_IVDRCTL) | 0x01, PA_IVDRCTL); /* Si13112 */
pm_power_off = r7780rp_power_off;
}
diff --git a/arch/sh/boards/mach-hp6xx/hp6xx_apm.c b/arch/sh/boards/mach-hp6xx/hp6xx_apm.c
index e85212faf40a..b49535c0ddd9 100644
--- a/arch/sh/boards/mach-hp6xx/hp6xx_apm.c
+++ b/arch/sh/boards/mach-hp6xx/hp6xx_apm.c
@@ -53,7 +53,7 @@ static void hp6x0_apm_get_power_status(struct apm_power_info *info)
info->ac_line_status = (battery > HP680_BATTERY_AC_ON) ?
APM_AC_ONLINE : APM_AC_OFFLINE;
- pgdr = ctrl_inb(PGDR);
+ pgdr = __raw_readb(PGDR);
if (pgdr & PGDR_MAIN_BATTERY_OUT) {
info->battery_status = APM_BATTERY_STATUS_NOT_PRESENT;
info->battery_flag = 0x80;
diff --git a/arch/sh/boards/mach-hp6xx/pm.c b/arch/sh/boards/mach-hp6xx/pm.c
index d936c1af7620..4499a3749d40 100644
--- a/arch/sh/boards/mach-hp6xx/pm.c
+++ b/arch/sh/boards/mach-hp6xx/pm.c
@@ -53,17 +53,17 @@ static void pm_enter(void)
sh_wdt_write_cnt(0);
/* disable PLL1 */
- frqcr = ctrl_inw(FRQCR);
+ frqcr = __raw_readw(FRQCR);
frqcr &= ~(FRQCR_PLLEN | FRQCR_PSTBY);
- ctrl_outw(frqcr, FRQCR);
+ __raw_writew(frqcr, FRQCR);
/* enable standby */
- stbcr = ctrl_inb(STBCR);
- ctrl_outb(stbcr | STBCR_STBY | STBCR_MSTP2, STBCR);
+ stbcr = __raw_readb(STBCR);
+ __raw_writeb(stbcr | STBCR_STBY | STBCR_MSTP2, STBCR);
/* set self-refresh */
- mcr = ctrl_inw(MCR);
- ctrl_outw(mcr & ~MCR_RFSH, MCR);
+ mcr = __raw_readw(MCR);
+ __raw_writew(mcr & ~MCR_RFSH, MCR);
/* set interrupt handler */
asm volatile("stc vbr, %0" : "=r" (vbr_old));
@@ -73,8 +73,8 @@ static void pm_enter(void)
&wakeup_start, &wakeup_end - &wakeup_start);
asm volatile("ldc %0, vbr" : : "r" (vbr_new));
- ctrl_outw(0, RTCNT);
- ctrl_outw(mcr | MCR_RFSH | MCR_RMODE, MCR);
+ __raw_writew(0, RTCNT);
+ __raw_writew(mcr | MCR_RFSH | MCR_RMODE, MCR);
cpu_sleep();
@@ -83,14 +83,14 @@ static void pm_enter(void)
free_page(vbr_new);
/* enable PLL1 */
- frqcr = ctrl_inw(FRQCR);
+ frqcr = __raw_readw(FRQCR);
frqcr |= FRQCR_PSTBY;
- ctrl_outw(frqcr, FRQCR);
+ __raw_writew(frqcr, FRQCR);
udelay(50);
frqcr |= FRQCR_PLLEN;
- ctrl_outw(frqcr, FRQCR);
+ __raw_writew(frqcr, FRQCR);
- ctrl_outb(stbcr, STBCR);
+ __raw_writeb(stbcr, STBCR);
clear_bl_bit();
}
@@ -115,21 +115,21 @@ static int hp6x0_pm_enter(suspend_state_t state)
outw(hd64461_stbcr, HD64461_STBCR);
#endif
- ctrl_outb(0x1f, DACR);
+ __raw_writeb(0x1f, DACR);
- stbcr = ctrl_inb(STBCR);
- ctrl_outb(0x01, STBCR);
+ stbcr = __raw_readb(STBCR);
+ __raw_writeb(0x01, STBCR);
- stbcr2 = ctrl_inb(STBCR2);
- ctrl_outb(0x7f , STBCR2);
+ stbcr2 = __raw_readb(STBCR2);
+ __raw_writeb(0x7f , STBCR2);
outw(0xf07f, HD64461_SCPUCR);
pm_enter();
outw(0, HD64461_SCPUCR);
- ctrl_outb(stbcr, STBCR);
- ctrl_outb(stbcr2, STBCR2);
+ __raw_writeb(stbcr, STBCR);
+ __raw_writeb(stbcr2, STBCR2);
#ifdef CONFIG_HD64461_ENABLER
hd64461_stbcr = inw(HD64461_STBCR);
diff --git a/arch/sh/boards/mach-hp6xx/setup.c b/arch/sh/boards/mach-hp6xx/setup.c
index e6dd5e96321e..8c9add5f4cfa 100644
--- a/arch/sh/boards/mach-hp6xx/setup.c
+++ b/arch/sh/boards/mach-hp6xx/setup.c
@@ -149,19 +149,19 @@ static void __init hp6xx_setup(char **cmdline_p)
sh_dac_output(0, DAC_SPEAKER_VOLUME);
sh_dac_disable(DAC_SPEAKER_VOLUME);
- v8 = ctrl_inb(DACR);
+ v8 = __raw_readb(DACR);
v8 &= ~DACR_DAE;
- ctrl_outb(v8,DACR);
+ __raw_writeb(v8,DACR);
- v8 = ctrl_inb(SCPDR);
+ v8 = __raw_readb(SCPDR);
v8 |= SCPDR_TS_SCAN_X | SCPDR_TS_SCAN_Y;
v8 &= ~SCPDR_TS_SCAN_ENABLE;
- ctrl_outb(v8, SCPDR);
+ __raw_writeb(v8, SCPDR);
- v = ctrl_inw(SCPCR);
+ v = __raw_readw(SCPCR);
v &= ~SCPCR_TS_MASK;
v |= SCPCR_TS_ENABLE;
- ctrl_outw(v, SCPCR);
+ __raw_writew(v, SCPCR);
}
device_initcall(hp6xx_devices_setup);
diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c
index 5d7b5d92475e..ca9e82d77d0a 100644
--- a/arch/sh/boards/mach-kfr2r09/setup.c
+++ b/arch/sh/boards/mach-kfr2r09/setup.c
@@ -282,7 +282,7 @@ static int camera_power(struct device *dev, int mode)
* use 1.8 V for VccQ_VIO
* use 2.85V for VccQ_SR
*/
- ctrl_outw((ctrl_inw(DRVCRB) & ~0x0003) | 0x0001, DRVCRB);
+ __raw_writew((__raw_readw(DRVCRB) & ~0x0003) | 0x0001, DRVCRB);
/* reset clear */
ret = gpio_request(GPIO_PTB4, NULL);
@@ -492,13 +492,13 @@ static int kfr2r09_usb0_gadget_setup(void)
if (kfr2r09_usb0_gadget_i2c_setup() != 0)
return -ENODEV; /* unable to configure using i2c */
- ctrl_outw((ctrl_inw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
+ __raw_writew((__raw_readw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
gpio_request(GPIO_FN_PDSTATUS, NULL); /* R-standby disables USB clock */
gpio_request(GPIO_PTV6, NULL); /* USBCLK_ON */
gpio_direction_output(GPIO_PTV6, 1); /* USBCLK_ON = H */
msleep(20); /* wait 20ms to let the clock settle */
clk_enable(clk_get(NULL, "usb0"));
- ctrl_outw(0x0600, 0xa40501d4);
+ __raw_writew(0x0600, 0xa40501d4);
return 0;
}
@@ -526,12 +526,12 @@ static int __init kfr2r09_devices_setup(void)
gpio_direction_output(GPIO_PTG3, 1); /* HPON_ON = H */
/* setup NOR flash at CS0 */
- ctrl_outl(0x36db0400, BSC_CS0BCR);
- ctrl_outl(0x00000500, BSC_CS0WCR);
+ __raw_writel(0x36db0400, BSC_CS0BCR);
+ __raw_writel(0x00000500, BSC_CS0WCR);
/* setup NAND flash at CS4 */
- ctrl_outl(0x36db0400, BSC_CS4BCR);
- ctrl_outl(0x00000500, BSC_CS4WCR);
+ __raw_writel(0x36db0400, BSC_CS4BCR);
+ __raw_writel(0x00000500, BSC_CS4WCR);
/* setup KEYSC pins */
gpio_request(GPIO_FN_KEYOUT0, NULL);
diff --git a/arch/sh/boards/mach-landisk/gio.c b/arch/sh/boards/mach-landisk/gio.c
index 528013188196..01e6abb769b9 100644
--- a/arch/sh/boards/mach-landisk/gio.c
+++ b/arch/sh/boards/mach-landisk/gio.c
@@ -76,39 +76,39 @@ static long gio_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
break;
case GIODRV_IOCSGIODATA1: /* write byte */
- ctrl_outb((unsigned char)(0x0ff & data), addr);
+ __raw_writeb((unsigned char)(0x0ff & data), addr);
break;
case GIODRV_IOCSGIODATA2: /* write word */
if (addr & 0x01) {
return -EFAULT;
}
- ctrl_outw((unsigned short int)(0x0ffff & data), addr);
+ __raw_writew((unsigned short int)(0x0ffff & data), addr);
break;
case GIODRV_IOCSGIODATA4: /* write long */
if (addr & 0x03) {
return -EFAULT;
}
- ctrl_outl(data, addr);
+ __raw_writel(data, addr);
break;
case GIODRV_IOCGGIODATA1: /* read byte */
- data = ctrl_inb(addr);
+ data = __raw_readb(addr);
break;
case GIODRV_IOCGGIODATA2: /* read word */
if (addr & 0x01) {
return -EFAULT;
}
- data = ctrl_inw(addr);
+ data = __raw_readw(addr);
break;
case GIODRV_IOCGGIODATA4: /* read long */
if (addr & 0x03) {
return -EFAULT;
}
- data = ctrl_inl(addr);
+ data = __raw_readl(addr);
break;
default:
return -EFAULT;
diff --git a/arch/sh/boards/mach-landisk/irq.c b/arch/sh/boards/mach-landisk/irq.c
index 7b284cde1f58..96f38a4187d0 100644
--- a/arch/sh/boards/mach-landisk/irq.c
+++ b/arch/sh/boards/mach-landisk/irq.c
@@ -22,14 +22,14 @@ static void disable_landisk_irq(unsigned int irq)
{
unsigned char mask = 0xff ^ (0x01 << (irq - 5));
- ctrl_outb(ctrl_inb(PA_IMASK) & mask, PA_IMASK);
+ __raw_writeb(__raw_readb(PA_IMASK) & mask, PA_IMASK);
}
static void enable_landisk_irq(unsigned int irq)
{
unsigned char value = (0x01 << (irq - 5));
- ctrl_outb(ctrl_inb(PA_IMASK) | value, PA_IMASK);
+ __raw_writeb(__raw_readb(PA_IMASK) | value, PA_IMASK);
}
static struct irq_chip landisk_irq_chip __read_mostly = {
@@ -52,5 +52,5 @@ void __init init_landisk_IRQ(void)
handle_level_irq, "level");
enable_landisk_irq(i);
}
- ctrl_outb(0x00, PA_PWRINT_CLR);
+ __raw_writeb(0x00, PA_PWRINT_CLR);
}
diff --git a/arch/sh/boards/mach-landisk/psw.c b/arch/sh/boards/mach-landisk/psw.c
index e6b0efa098d1..bef83522f958 100644
--- a/arch/sh/boards/mach-landisk/psw.c
+++ b/arch/sh/boards/mach-landisk/psw.c
@@ -25,7 +25,7 @@ static irqreturn_t psw_irq_handler(int irq, void *arg)
unsigned int sw_value;
int ret = 0;
- sw_value = (0x0ff & (~ctrl_inb(PA_STATUS)));
+ sw_value = (0x0ff & (~__raw_readb(PA_STATUS)));
/* Nothing to do if there's no state change */
if (psw->state) {
@@ -42,7 +42,7 @@ static irqreturn_t psw_irq_handler(int irq, void *arg)
out:
/* Clear the switch IRQs */
- ctrl_outb(0x00, PA_PWRINT_CLR);
+ __raw_writeb(0x00, PA_PWRINT_CLR);
return IRQ_RETVAL(ret);
}
diff --git a/arch/sh/boards/mach-landisk/setup.c b/arch/sh/boards/mach-landisk/setup.c
index 2d09d4d34f87..50337acc18c5 100644
--- a/arch/sh/boards/mach-landisk/setup.c
+++ b/arch/sh/boards/mach-landisk/setup.c
@@ -25,7 +25,7 @@ void init_landisk_IRQ(void);
static void landisk_power_off(void)
{
- ctrl_outb(0x01, PA_SHUTDOWN);
+ __raw_writeb(0x01, PA_SHUTDOWN);
}
static struct resource cf_ide_resources[3];
@@ -88,7 +88,7 @@ __initcall(landisk_devices_setup);
static void __init landisk_setup(char **cmdline_p)
{
/* LED ON */
- ctrl_outb(ctrl_inb(PA_LED) | 0x03, PA_LED);
+ __raw_writeb(__raw_readb(PA_LED) | 0x03, PA_LED);
printk(KERN_INFO "I-O DATA DEVICE, INC. \"LANDISK Series\" support.\n");
pm_power_off = landisk_power_off;
diff --git a/arch/sh/boards/mach-microdev/io.c b/arch/sh/boards/mach-microdev/io.c
index 52dd748211c7..2960c659020e 100644
--- a/arch/sh/boards/mach-microdev/io.c
+++ b/arch/sh/boards/mach-microdev/io.c
@@ -141,10 +141,10 @@ static inline void delay(void)
#if defined(CONFIG_PCI)
/* System board present, just make a dummy SRAM access. (CS0 will be
mapped to PCI memory, probably good to avoid it.) */
- ctrl_inw(0xa6800000);
+ __raw_readw(0xa6800000);
#else
/* CS0 will be mapped to flash, ROM etc so safe to access it. */
- ctrl_inw(0xa0000000);
+ __raw_readw(0xa0000000);
#endif
}
diff --git a/arch/sh/boards/mach-microdev/irq.c b/arch/sh/boards/mach-microdev/irq.c
index b551963579c1..a26d16669aa2 100644
--- a/arch/sh/boards/mach-microdev/irq.c
+++ b/arch/sh/boards/mach-microdev/irq.c
@@ -88,7 +88,7 @@ static void disable_microdev_irq(unsigned int irq)
fpgaIrq = fpgaIrqTable[irq].fpgaIrq;
/* disable interrupts on the FPGA INTC register */
- ctrl_outl(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTDSB_REG);
+ __raw_writel(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTDSB_REG);
}
static void enable_microdev_irq(unsigned int irq)
@@ -107,13 +107,13 @@ static void enable_microdev_irq(unsigned int irq)
priorityReg = MICRODEV_FPGA_INTPRI_REG(fpgaIrq);
/* set priority for the interrupt */
- priorities = ctrl_inl(priorityReg);
+ priorities = __raw_readl(priorityReg);
priorities &= ~MICRODEV_FPGA_INTPRI_MASK(fpgaIrq);
priorities |= MICRODEV_FPGA_INTPRI_LEVEL(fpgaIrq, pri);
- ctrl_outl(priorities, priorityReg);
+ __raw_writel(priorities, priorityReg);
/* enable interrupts on the FPGA INTC register */
- ctrl_outl(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTENB_REG);
+ __raw_writel(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTENB_REG);
}
/* This function sets the desired irq handler to be a MicroDev type */
@@ -134,7 +134,7 @@ extern void __init init_microdev_irq(void)
int i;
/* disable interrupts on the FPGA INTC register */
- ctrl_outl(~0ul, MICRODEV_FPGA_INTDSB_REG);
+ __raw_writel(~0ul, MICRODEV_FPGA_INTDSB_REG);
for (i = 0; i < NUM_EXTERNAL_IRQS; i++)
make_microdev_irq(i);
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index 507c77be476d..ed2eeeb390a5 100644
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -516,8 +516,8 @@ static int __init migor_devices_setup(void)
/* SMC91C111 - Enable IRQ0, Setup CS4 for 16-bit fast access */
gpio_request(GPIO_FN_IRQ0, NULL);
- ctrl_outl(0x00003400, BSC_CS4BCR);
- ctrl_outl(0x00110080, BSC_CS4WCR);
+ __raw_writel(0x00003400, BSC_CS4BCR);
+ __raw_writel(0x00110080, BSC_CS4WCR);
/* KEYSC */
gpio_request(GPIO_FN_KEYOUT0, NULL);
@@ -533,7 +533,7 @@ static int __init migor_devices_setup(void)
/* NAND Flash */
gpio_request(GPIO_FN_CS6A_CE2B, NULL);
- ctrl_outl((ctrl_inl(BSC_CS6ABCR) & ~0x0600) | 0x0200, BSC_CS6ABCR);
+ __raw_writel((__raw_readl(BSC_CS6ABCR) & ~0x0600) | 0x0200, BSC_CS6ABCR);
gpio_request(GPIO_PTA1, NULL);
gpio_direction_input(GPIO_PTA1);
@@ -627,7 +627,7 @@ static int __init migor_devices_setup(void)
#else
gpio_direction_output(GPIO_PTT0, 1);
#endif
- ctrl_outw(ctrl_inw(PORT_MSELCRB) | 0x2000, PORT_MSELCRB); /* D15->D8 */
+ __raw_writew(__raw_readw(PORT_MSELCRB) | 0x2000, PORT_MSELCRB); /* D15->D8 */
platform_resource_setup_memory(&migor_ceu_device, "ceu", 4 << 20);
diff --git a/arch/sh/boards/mach-r2d/irq.c b/arch/sh/boards/mach-r2d/irq.c
index 78d7b27c80da..574f009c3c31 100644
--- a/arch/sh/boards/mach-r2d/irq.c
+++ b/arch/sh/boards/mach-r2d/irq.c
@@ -129,7 +129,7 @@ void __init init_rts7751r2d_IRQ(void)
{
struct intc_desc *d;
- switch (ctrl_inw(PA_VERREG) & 0xf0) {
+ switch (__raw_readw(PA_VERREG) & 0xf0) {
#ifdef CONFIG_RTS7751R2D_PLUS
case 0x10:
printk(KERN_INFO "Using R2D-PLUS interrupt controller.\n");
@@ -147,7 +147,7 @@ void __init init_rts7751r2d_IRQ(void)
#endif
default:
printk(KERN_INFO "Unknown R2D interrupt controller 0x%04x\n",
- ctrl_inw(PA_VERREG));
+ __raw_readw(PA_VERREG));
return;
}
diff --git a/arch/sh/boards/mach-r2d/setup.c b/arch/sh/boards/mach-r2d/setup.c
index a625ecb93e47..b84df6a3a93c 100644
--- a/arch/sh/boards/mach-r2d/setup.c
+++ b/arch/sh/boards/mach-r2d/setup.c
@@ -70,7 +70,7 @@ static struct spi_board_info spi_bus[] = {
static void r2d_chip_select(struct sh_spi_info *spi, int cs, int state)
{
BUG_ON(cs != 0); /* Single Epson RTC-9701JE attached on CS0 */
- ctrl_outw(state == BITBANG_CS_ACTIVE, PA_RTCCE);
+ __raw_writew(state == BITBANG_CS_ACTIVE, PA_RTCCE);
}
static struct sh_spi_info spi_info = {
@@ -262,7 +262,7 @@ __initcall(rts7751r2d_devices_setup);
static void rts7751r2d_power_off(void)
{
- ctrl_outw(0x0001, PA_POWOFF);
+ __raw_writew(0x0001, PA_POWOFF);
}
/*
@@ -271,14 +271,14 @@ static void rts7751r2d_power_off(void)
static void __init rts7751r2d_setup(char **cmdline_p)
{
void __iomem *sm501_reg;
- u16 ver = ctrl_inw(PA_VERREG);
+ u16 ver = __raw_readw(PA_VERREG);
printk(KERN_INFO "Renesas Technology Sales RTS7751R2D support.\n");
printk(KERN_INFO "FPGA version:%d (revision:%d)\n",
(ver >> 4) & 0xf, ver & 0xf);
- ctrl_outw(0x0000, PA_OUTPORT);
+ __raw_writew(0x0000, PA_OUTPORT);
pm_power_off = rts7751r2d_power_off;
/* sm501 dram configuration:
diff --git a/arch/sh/boards/mach-rsk/devices-rsk7203.c b/arch/sh/boards/mach-rsk/devices-rsk7203.c
index c37617e63220..4fa08ba10253 100644
--- a/arch/sh/boards/mach-rsk/devices-rsk7203.c
+++ b/arch/sh/boards/mach-rsk/devices-rsk7203.c
@@ -96,7 +96,7 @@ static int __init rsk7203_devices_setup(void)
gpio_request(GPIO_FN_RXD0, NULL);
/* Setup LAN9118: CS1 in 16-bit Big Endian Mode, IRQ0 at Port B */
- ctrl_outl(0x36db0400, 0xfffc0008); /* CS1BCR */
+ __raw_writel(0x36db0400, 0xfffc0008); /* CS1BCR */
gpio_request(GPIO_FN_IRQ0_PB, NULL);
return platform_add_devices(rsk7203_devices,
diff --git a/arch/sh/boards/mach-sdk7780/irq.c b/arch/sh/boards/mach-sdk7780/irq.c
index 855558163c58..e5f7564f2511 100644
--- a/arch/sh/boards/mach-sdk7780/irq.c
+++ b/arch/sh/boards/mach-sdk7780/irq.c
@@ -37,9 +37,9 @@ void __init init_sdk7780_IRQ(void)
{
printk(KERN_INFO "Using SDK7780 interrupt controller.\n");
- ctrl_outw(0xFFFF, FPGA_IRQ0MR);
+ __raw_writew(0xFFFF, FPGA_IRQ0MR);
/* Setup IRL 0-3 */
- ctrl_outw(0x0003, FPGA_IMSR);
+ __raw_writew(0x0003, FPGA_IMSR);
plat_irq_setup_pins(IRQ_MODE_IRL3210);
register_intc_controller(&fpga_intc_desc);
diff --git a/arch/sh/boards/mach-sdk7780/setup.c b/arch/sh/boards/mach-sdk7780/setup.c
index b887373a2599..4da38db4b5fe 100644
--- a/arch/sh/boards/mach-sdk7780/setup.c
+++ b/arch/sh/boards/mach-sdk7780/setup.c
@@ -74,8 +74,8 @@ device_initcall(sdk7780_devices_setup);
static void __init sdk7780_setup(char **cmdline_p)
{
- u16 ver = ctrl_inw(FPGA_FPVERR);
- u16 dateStamp = ctrl_inw(FPGA_FPDATER);
+ u16 ver = __raw_readw(FPGA_FPVERR);
+ u16 dateStamp = __raw_readw(FPGA_FPDATER);
printk(KERN_INFO "Renesas Technology Europe SDK7780 support.\n");
printk(KERN_INFO "Board version: %d (revision %d), "
@@ -85,7 +85,7 @@ static void __init sdk7780_setup(char **cmdline_p)
dateStamp);
/* Setup pin mux'ing for PCIC */
- ctrl_outw(0x0000, GPIO_PECR);
+ __raw_writew(0x0000, GPIO_PECR);
}
/*
diff --git a/arch/sh/boards/mach-se/7206/io.c b/arch/sh/boards/mach-se/7206/io.c
index 180455642a43..adadc77532ee 100644
--- a/arch/sh/boards/mach-se/7206/io.c
+++ b/arch/sh/boards/mach-se/7206/io.c
@@ -16,7 +16,7 @@
static inline void delay(void)
{
- ctrl_inw(0x20000000); /* P2 ROM Area */
+ __raw_readw(0x20000000); /* P2 ROM Area */
}
/* MS7750 requires special versions of in*, out* routines, since
diff --git a/arch/sh/boards/mach-se/7206/irq.c b/arch/sh/boards/mach-se/7206/irq.c
index aef7f052851a..79be4bc59933 100644
--- a/arch/sh/boards/mach-se/7206/irq.c
+++ b/arch/sh/boards/mach-se/7206/irq.c
@@ -32,12 +32,12 @@ static void disable_se7206_irq(unsigned int irq)
unsigned short msk0,msk1;
/* Set the priority in IPR to 0 */
- val = ctrl_inw(INTC_IPR01);
+ val = __raw_readw(INTC_IPR01);
val &= mask;
- ctrl_outw(val, INTC_IPR01);
+ __raw_writew(val, INTC_IPR01);
/* FPGA mask set */
- msk0 = ctrl_inw(INTMSK0);
- msk1 = ctrl_inw(INTMSK1);
+ msk0 = __raw_readw(INTMSK0);
+ msk1 = __raw_readw(INTMSK1);
switch (irq) {
case IRQ0_IRQ:
@@ -51,8 +51,8 @@ static void disable_se7206_irq(unsigned int irq)
msk1 |= 0x00ff;
break;
}
- ctrl_outw(msk0, INTMSK0);
- ctrl_outw(msk1, INTMSK1);
+ __raw_writew(msk0, INTMSK0);
+ __raw_writew(msk1, INTMSK1);
}
static void enable_se7206_irq(unsigned int irq)
@@ -62,13 +62,13 @@ static void enable_se7206_irq(unsigned int irq)
unsigned short msk0,msk1;
/* Set priority in IPR back to original value */
- val = ctrl_inw(INTC_IPR01);
+ val = __raw_readw(INTC_IPR01);
val |= value;
- ctrl_outw(val, INTC_IPR01);
+ __raw_writew(val, INTC_IPR01);
/* FPGA mask reset */
- msk0 = ctrl_inw(INTMSK0);
- msk1 = ctrl_inw(INTMSK1);
+ msk0 = __raw_readw(INTMSK0);
+ msk1 = __raw_readw(INTMSK1);
switch (irq) {
case IRQ0_IRQ:
@@ -82,8 +82,8 @@ static void enable_se7206_irq(unsigned int irq)
msk1 &= ~0x00ff;
break;
}
- ctrl_outw(msk0, INTMSK0);
- ctrl_outw(msk1, INTMSK1);
+ __raw_writew(msk0, INTMSK0);
+ __raw_writew(msk1, INTMSK1);
}
static void eoi_se7206_irq(unsigned int irq)
@@ -93,8 +93,8 @@ static void eoi_se7206_irq(unsigned int irq)
if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
enable_se7206_irq(irq);
/* FPGA isr clear */
- sts0 = ctrl_inw(INTSTS0);
- sts1 = ctrl_inw(INTSTS1);
+ sts0 = __raw_readw(INTSTS0);
+ sts1 = __raw_readw(INTSTS1);
switch (irq) {
case IRQ0_IRQ:
@@ -108,8 +108,8 @@ static void eoi_se7206_irq(unsigned int irq)
sts1 &= ~0x00ff;
break;
}
- ctrl_outw(sts0, INTSTS0);
- ctrl_outw(sts1, INTSTS1);
+ __raw_writew(sts0, INTSTS0);
+ __raw_writew(sts1, INTSTS1);
}
static struct irq_chip se7206_irq_chip __read_mostly = {
@@ -136,11 +136,11 @@ void __init init_se7206_IRQ(void)
make_se7206_irq(IRQ0_IRQ); /* SMC91C111 */
make_se7206_irq(IRQ1_IRQ); /* ATA */
make_se7206_irq(IRQ3_IRQ); /* SLOT / PCM */
- ctrl_outw(inw(INTC_ICR1) | 0x000b ,INTC_ICR1 ) ; /* ICR1 */
+ __raw_writew(inw(INTC_ICR1) | 0x000b ,INTC_ICR1 ) ; /* ICR1 */
/* FPGA System register setup*/
- ctrl_outw(0x0000,INTSTS0); /* Clear INTSTS0 */
- ctrl_outw(0x0000,INTSTS1); /* Clear INTSTS1 */
+ __raw_writew(0x0000,INTSTS0); /* Clear INTSTS0 */
+ __raw_writew(0x0000,INTSTS1); /* Clear INTSTS1 */
/* IRQ0=LAN, IRQ1=ATA, IRQ3=SLT,PCM */
- ctrl_outw(0x0001,INTSEL);
+ __raw_writew(0x0001,INTSEL);
}
diff --git a/arch/sh/boards/mach-se/7343/irq.c b/arch/sh/boards/mach-se/7343/irq.c
index c60fd13608d0..d4305c26e9f7 100644
--- a/arch/sh/boards/mach-se/7343/irq.c
+++ b/arch/sh/boards/mach-se/7343/irq.c
@@ -21,13 +21,13 @@ unsigned int se7343_fpga_irq[SE7343_FPGA_IRQ_NR] = { 0, };
static void disable_se7343_irq(unsigned int irq)
{
unsigned int bit = (unsigned int)get_irq_chip_data(irq);
- ctrl_outw(ctrl_inw(PA_CPLD_IMSK) | 1 << bit, PA_CPLD_IMSK);
+ __raw_writew(__raw_readw(PA_CPLD_IMSK) | 1 << bit, PA_CPLD_IMSK);
}
static void enable_se7343_irq(unsigned int irq)
{
unsigned int bit = (unsigned int)get_irq_chip_data(irq);
- ctrl_outw(ctrl_inw(PA_CPLD_IMSK) & ~(1 << bit), PA_CPLD_IMSK);
+ __raw_writew(__raw_readw(PA_CPLD_IMSK) & ~(1 << bit), PA_CPLD_IMSK);
}
static struct irq_chip se7343_irq_chip __read_mostly = {
@@ -39,7 +39,7 @@ static struct irq_chip se7343_irq_chip __read_mostly = {
static void se7343_irq_demux(unsigned int irq, struct irq_desc *desc)
{
- unsigned short intv = ctrl_inw(PA_CPLD_ST);
+ unsigned short intv = __raw_readw(PA_CPLD_ST);
unsigned int ext_irq = 0;
intv &= (1 << SE7343_FPGA_IRQ_NR) - 1;
@@ -59,8 +59,8 @@ void __init init_7343se_IRQ(void)
{
int i, irq;
- ctrl_outw(0, PA_CPLD_IMSK); /* disable all irqs */
- ctrl_outw(0x2000, 0xb03fffec); /* mrshpc irq enable */
+ __raw_writew(0, PA_CPLD_IMSK); /* disable all irqs */
+ __raw_writew(0x2000, 0xb03fffec); /* mrshpc irq enable */
for (i = 0; i < SE7343_FPGA_IRQ_NR; i++) {
irq = create_irq();
diff --git a/arch/sh/boards/mach-se/7343/setup.c b/arch/sh/boards/mach-se/7343/setup.c
index 3412bb2973ae..d2370af56d77 100644
--- a/arch/sh/boards/mach-se/7343/setup.c
+++ b/arch/sh/boards/mach-se/7343/setup.c
@@ -161,10 +161,10 @@ device_initcall(sh7343se_devices_setup);
*/
static void __init sh7343se_setup(char **cmdline_p)
{
- ctrl_outw(0xf900, FPGA_OUT); /* FPGA */
+ __raw_writew(0xf900, FPGA_OUT); /* FPGA */
- ctrl_outw(0x0002, PORT_PECR); /* PORT E 1 = IRQ5 */
- ctrl_outw(0x0020, PORT_PSELD);
+ __raw_writew(0x0002, PORT_PECR); /* PORT E 1 = IRQ5 */
+ __raw_writew(0x0020, PORT_PSELD);
printk(KERN_INFO "MS7343CP01 Setup...done\n");
}
diff --git a/arch/sh/boards/mach-se/770x/irq.c b/arch/sh/boards/mach-se/770x/irq.c
index ec1fea571b52..1028c17b81bc 100644
--- a/arch/sh/boards/mach-se/770x/irq.c
+++ b/arch/sh/boards/mach-se/770x/irq.c
@@ -96,13 +96,13 @@ static struct ipr_desc ipr_irq_desc = {
void __init init_se_IRQ(void)
{
/* Disable all interrupts */
- ctrl_outw(0, BCR_ILCRA);
- ctrl_outw(0, BCR_ILCRB);
- ctrl_outw(0, BCR_ILCRC);
- ctrl_outw(0, BCR_ILCRD);
- ctrl_outw(0, BCR_ILCRE);
- ctrl_outw(0, BCR_ILCRF);
- ctrl_outw(0, BCR_ILCRG);
+ __raw_writew(0, BCR_ILCRA);
+ __raw_writew(0, BCR_ILCRB);
+ __raw_writew(0, BCR_ILCRC);
+ __raw_writew(0, BCR_ILCRD);
+ __raw_writew(0, BCR_ILCRE);
+ __raw_writew(0, BCR_ILCRF);
+ __raw_writew(0, BCR_ILCRG);
register_ipr_controller(&ipr_irq_desc);
}
diff --git a/arch/sh/boards/mach-se/7721/irq.c b/arch/sh/boards/mach-se/7721/irq.c
index b417acc4dad0..d85022ea3f12 100644
--- a/arch/sh/boards/mach-se/7721/irq.c
+++ b/arch/sh/boards/mach-se/7721/irq.c
@@ -38,7 +38,7 @@ static DECLARE_INTC_DESC(intc_desc, "SE7721", vectors,
void __init init_se7721_IRQ(void)
{
/* PPCR */
- ctrl_outw(ctrl_inw(0xa4050118) & ~0x00ff, 0xa4050118);
+ __raw_writew(__raw_readw(0xa4050118) & ~0x00ff, 0xa4050118);
register_intc_controller(&intc_desc);
intc_set_priority(MRSHPC_IRQ0, 0xf - MRSHPC_IRQ0);
diff --git a/arch/sh/boards/mach-se/7721/setup.c b/arch/sh/boards/mach-se/7721/setup.c
index 460da53b4961..7416ad7ee53a 100644
--- a/arch/sh/boards/mach-se/7721/setup.c
+++ b/arch/sh/boards/mach-se/7721/setup.c
@@ -80,10 +80,10 @@ device_initcall(se7721_devices_setup);
static void __init se7721_setup(char **cmdline_p)
{
/* for USB */
- ctrl_outw(0x0000, 0xA405010C); /* PGCR */
- ctrl_outw(0x0000, 0xA405010E); /* PHCR */
- ctrl_outw(0x00AA, 0xA4050118); /* PPCR */
- ctrl_outw(0x0000, 0xA4050124); /* PSELA */
+ __raw_writew(0x0000, 0xA405010C); /* PGCR */
+ __raw_writew(0x0000, 0xA405010E); /* PHCR */
+ __raw_writew(0x00AA, 0xA4050118); /* PPCR */
+ __raw_writew(0x0000, 0xA4050124); /* PSELA */
}
/*
diff --git a/arch/sh/boards/mach-se/7722/irq.c b/arch/sh/boards/mach-se/7722/irq.c
index b221b6842b0d..61605db04ee6 100644
--- a/arch/sh/boards/mach-se/7722/irq.c
+++ b/arch/sh/boards/mach-se/7722/irq.c
@@ -21,13 +21,13 @@ unsigned int se7722_fpga_irq[SE7722_FPGA_IRQ_NR] = { 0, };
static void disable_se7722_irq(unsigned int irq)
{
unsigned int bit = (unsigned int)get_irq_chip_data(irq);
- ctrl_outw(ctrl_inw(IRQ01_MASK) | 1 << bit, IRQ01_MASK);
+ __raw_writew(__raw_readw(IRQ01_MASK) | 1 << bit, IRQ01_MASK);
}
static void enable_se7722_irq(unsigned int irq)
{
unsigned int bit = (unsigned int)get_irq_chip_data(irq);
- ctrl_outw(ctrl_inw(IRQ01_MASK) & ~(1 << bit), IRQ01_MASK);
+ __raw_writew(__raw_readw(IRQ01_MASK) & ~(1 << bit), IRQ01_MASK);
}
static struct irq_chip se7722_irq_chip __read_mostly = {
@@ -39,7 +39,7 @@ static struct irq_chip se7722_irq_chip __read_mostly = {
static void se7722_irq_demux(unsigned int irq, struct irq_desc *desc)
{
- unsigned short intv = ctrl_inw(IRQ01_STS);
+ unsigned short intv = __raw_readw(IRQ01_STS);
unsigned int ext_irq = 0;
intv &= (1 << SE7722_FPGA_IRQ_NR) - 1;
@@ -59,8 +59,8 @@ void __init init_se7722_IRQ(void)
{
int i, irq;
- ctrl_outw(0, IRQ01_MASK); /* disable all irqs */
- ctrl_outw(0x2000, 0xb03fffec); /* mrshpc irq enable */
+ __raw_writew(0, IRQ01_MASK); /* disable all irqs */
+ __raw_writew(0x2000, 0xb03fffec); /* mrshpc irq enable */
for (i = 0; i < SE7722_FPGA_IRQ_NR; i++) {
irq = create_irq();
diff --git a/arch/sh/boards/mach-se/7722/setup.c b/arch/sh/boards/mach-se/7722/setup.c
index 93675418171d..80a4e571b310 100644
--- a/arch/sh/boards/mach-se/7722/setup.c
+++ b/arch/sh/boards/mach-se/7722/setup.c
@@ -156,32 +156,32 @@ device_initcall(se7722_devices_setup);
static void __init se7722_setup(char **cmdline_p)
{
- ctrl_outw(0x010D, FPGA_OUT); /* FPGA */
+ __raw_writew(0x010D, FPGA_OUT); /* FPGA */
- ctrl_outw(0x0000, PORT_PECR); /* PORT E 1 = IRQ5 ,E 0 = BS */
- ctrl_outw(0x1000, PORT_PJCR); /* PORT J 1 = IRQ1,J 0 =IRQ0 */
+ __raw_writew(0x0000, PORT_PECR); /* PORT E 1 = IRQ5 ,E 0 = BS */
+ __raw_writew(0x1000, PORT_PJCR); /* PORT J 1 = IRQ1,J 0 =IRQ0 */
/* LCDC I/O */
- ctrl_outw(0x0020, PORT_PSELD);
+ __raw_writew(0x0020, PORT_PSELD);
/* SIOF1*/
- ctrl_outw(0x0003, PORT_PSELB);
- ctrl_outw(0xe000, PORT_PSELC);
- ctrl_outw(0x0000, PORT_PKCR);
+ __raw_writew(0x0003, PORT_PSELB);
+ __raw_writew(0xe000, PORT_PSELC);
+ __raw_writew(0x0000, PORT_PKCR);
/* LCDC */
- ctrl_outw(0x4020, PORT_PHCR);
- ctrl_outw(0x0000, PORT_PLCR);
- ctrl_outw(0x0000, PORT_PMCR);
- ctrl_outw(0x0002, PORT_PRCR);
- ctrl_outw(0x0000, PORT_PXCR); /* LCDC,CS6A */
+ __raw_writew(0x4020, PORT_PHCR);
+ __raw_writew(0x0000, PORT_PLCR);
+ __raw_writew(0x0000, PORT_PMCR);
+ __raw_writew(0x0002, PORT_PRCR);
+ __raw_writew(0x0000, PORT_PXCR); /* LCDC,CS6A */
/* KEYSC */
- ctrl_outw(0x0A10, PORT_PSELA); /* BS,SHHID2 */
- ctrl_outw(0x0000, PORT_PYCR);
- ctrl_outw(0x0000, PORT_PZCR);
- ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x4000, PORT_HIZCRA);
- ctrl_outw(ctrl_inw(PORT_HIZCRC) & ~0xc000, PORT_HIZCRC);
+ __raw_writew(0x0A10, PORT_PSELA); /* BS,SHHID2 */
+ __raw_writew(0x0000, PORT_PYCR);
+ __raw_writew(0x0000, PORT_PZCR);
+ __raw_writew(__raw_readw(PORT_HIZCRA) & ~0x4000, PORT_HIZCRA);
+ __raw_writew(__raw_readw(PORT_HIZCRC) & ~0xc000, PORT_HIZCRC);
}
/*
diff --git a/arch/sh/boards/mach-se/7724/irq.c b/arch/sh/boards/mach-se/7724/irq.c
index f76cf3b49f23..e5e021a7d1e6 100644
--- a/arch/sh/boards/mach-se/7724/irq.c
+++ b/arch/sh/boards/mach-se/7724/irq.c
@@ -72,14 +72,14 @@ static void disable_se7724_irq(unsigned int irq)
{
struct fpga_irq set = get_fpga_irq(fpga2irq(irq));
unsigned int bit = irq - set.base;
- ctrl_outw(ctrl_inw(set.mraddr) | 0x0001 << bit, set.mraddr);
+ __raw_writew(__raw_readw(set.mraddr) | 0x0001 << bit, set.mraddr);
}
static void enable_se7724_irq(unsigned int irq)
{
struct fpga_irq set = get_fpga_irq(fpga2irq(irq));
unsigned int bit = irq - set.base;
- ctrl_outw(ctrl_inw(set.mraddr) & ~(0x0001 << bit), set.mraddr);
+ __raw_writew(__raw_readw(set.mraddr) & ~(0x0001 << bit), set.mraddr);
}
static struct irq_chip se7724_irq_chip __read_mostly = {
@@ -92,7 +92,7 @@ static struct irq_chip se7724_irq_chip __read_mostly = {
static void se7724_irq_demux(unsigned int irq, struct irq_desc *desc)
{
struct fpga_irq set = get_fpga_irq(irq);
- unsigned short intv = ctrl_inw(set.sraddr);
+ unsigned short intv = __raw_readw(set.sraddr);
struct irq_desc *ext_desc;
unsigned int ext_irq = set.base;
@@ -115,13 +115,13 @@ void __init init_se7724_IRQ(void)
{
int i;
- ctrl_outw(0xffff, IRQ0_MR); /* mask all */
- ctrl_outw(0xffff, IRQ1_MR); /* mask all */
- ctrl_outw(0xffff, IRQ2_MR); /* mask all */
- ctrl_outw(0x0000, IRQ0_SR); /* clear irq */
- ctrl_outw(0x0000, IRQ1_SR); /* clear irq */
- ctrl_outw(0x0000, IRQ2_SR); /* clear irq */
- ctrl_outw(0x002a, IRQ_MODE); /* set irq type */
+ __raw_writew(0xffff, IRQ0_MR); /* mask all */
+ __raw_writew(0xffff, IRQ1_MR); /* mask all */
+ __raw_writew(0xffff, IRQ2_MR); /* mask all */
+ __raw_writew(0x0000, IRQ0_SR); /* clear irq */
+ __raw_writew(0x0000, IRQ1_SR); /* clear irq */
+ __raw_writew(0x0000, IRQ2_SR); /* clear irq */
+ __raw_writew(0x002a, IRQ_MODE); /* set irq type */
for (i = 0; i < SE7724_FPGA_IRQ_NR; i++)
set_irq_chip_and_handler_name(SE7724_FPGA_IRQ_BASE + i,
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index cbfba783ee49..242dc843f574 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -256,12 +256,12 @@ static struct platform_device ceu1_device = {
#define FCLKACR 0xa4150008
static void fsimck_init(struct clk *clk)
{
- u32 status = ctrl_inl(clk->enable_reg);
+ u32 status = __raw_readl(clk->enable_reg);
/* use external clock */
status &= ~0x000000ff;
status |= 0x00000080;
- ctrl_outl(status, clk->enable_reg);
+ __raw_writel(status, clk->enable_reg);
}
static struct clk_ops fsimck_clk_ops = {
@@ -522,7 +522,7 @@ static int __init sh_eth_is_eeprom_ready(void)
int t = 10000;
while (t--) {
- if (!ctrl_inw(EEPROM_STAT))
+ if (!__raw_readw(EEPROM_STAT))
return 1;
cpu_relax();
}
@@ -542,13 +542,13 @@ static void __init sh_eth_init(void)
/* read MAC addr from EEPROM */
for (i = 0 ; i < 3 ; i++) {
- ctrl_outw(0x0, EEPROM_OP); /* read */
- ctrl_outw(i*2, EEPROM_ADR);
- ctrl_outw(0x1, EEPROM_STRT);
+ __raw_writew(0x0, EEPROM_OP); /* read */
+ __raw_writew(i*2, EEPROM_ADR);
+ __raw_writew(0x1, EEPROM_STRT);
if (!sh_eth_is_eeprom_ready())
return;
- mac = ctrl_inw(EEPROM_DATA);
+ mac = __raw_readw(EEPROM_DATA);
sh_eth_plat.mac_addr[i << 1] = mac & 0xff;
sh_eth_plat.mac_addr[(i << 1) + 1] = mac >> 8;
}
@@ -585,7 +585,7 @@ arch_initcall(arch_setup);
static int __init devices_setup(void)
{
- u16 sw = ctrl_inw(SW4140); /* select camera, monitor */
+ u16 sw = __raw_readw(SW4140); /* select camera, monitor */
struct clk *fsia_clk;
/* register board specific self-refresh code */
@@ -595,7 +595,7 @@ static int __init devices_setup(void)
&ms7724se_sdram_leave_start,
&ms7724se_sdram_leave_end);
/* Reset Release */
- ctrl_outw(ctrl_inw(FPGA_OUT) &
+ __raw_writew(__raw_readw(FPGA_OUT) &
~((1 << 1) | /* LAN */
(1 << 6) | /* VIDEO DAC */
(1 << 7) | /* AK4643 */
@@ -604,7 +604,7 @@ static int __init devices_setup(void)
FPGA_OUT);
/* turn on USB clocks, use external clock */
- ctrl_outw((ctrl_inw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
+ __raw_writew((__raw_readw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
#ifdef CONFIG_PM
/* Let LED9 show STATUS2 */
@@ -633,10 +633,10 @@ static int __init devices_setup(void)
#endif
/* enable USB0 port */
- ctrl_outw(0x0600, 0xa40501d4);
+ __raw_writew(0x0600, 0xa40501d4);
/* enable USB1 port */
- ctrl_outw(0x0600, 0xa4050192);
+ __raw_writew(0x0600, 0xa4050192);
/* enable IRQ 0,1,2 */
gpio_request(GPIO_FN_INTC_IRQ0, NULL);
@@ -684,7 +684,7 @@ static int __init devices_setup(void)
gpio_request(GPIO_FN_LCDVCPWC, NULL);
gpio_request(GPIO_FN_LCDRD, NULL);
gpio_request(GPIO_FN_LCDLCLK, NULL);
- ctrl_outw((ctrl_inw(PORT_HIZA) & ~0x0001), PORT_HIZA);
+ __raw_writew((__raw_readw(PORT_HIZA) & ~0x0001), PORT_HIZA);
/* enable CEU0 */
gpio_request(GPIO_FN_VIO0_D15, NULL);
diff --git a/arch/sh/boards/mach-se/7780/irq.c b/arch/sh/boards/mach-se/7780/irq.c
index 121744c08714..d5c9edc172a3 100644
--- a/arch/sh/boards/mach-se/7780/irq.c
+++ b/arch/sh/boards/mach-se/7780/irq.c
@@ -24,30 +24,30 @@
void __init init_se7780_IRQ(void)
{
/* enable all interrupt at FPGA */
- ctrl_outw(0, FPGA_INTMSK1);
+ __raw_writew(0, FPGA_INTMSK1);
/* mask SM501 interrupt */
- ctrl_outw((ctrl_inw(FPGA_INTMSK1) | 0x0002), FPGA_INTMSK1);
+ __raw_writew((__raw_readw(FPGA_INTMSK1) | 0x0002), FPGA_INTMSK1);
/* enable all interrupt at FPGA */
- ctrl_outw(0, FPGA_INTMSK2);
+ __raw_writew(0, FPGA_INTMSK2);
/* set FPGA INTSEL register */
/* FPGA + 0x06 */
- ctrl_outw( ((IRQPIN_SM501 << IRQPOS_SM501) |
+ __raw_writew( ((IRQPIN_SM501 << IRQPOS_SM501) |
(IRQPIN_SMC91CX << IRQPOS_SMC91CX)), FPGA_INTSEL1);
/* FPGA + 0x08 */
- ctrl_outw(((IRQPIN_EXTINT4 << IRQPOS_EXTINT4) |
+ __raw_writew(((IRQPIN_EXTINT4 << IRQPOS_EXTINT4) |
(IRQPIN_EXTINT3 << IRQPOS_EXTINT3) |
(IRQPIN_EXTINT2 << IRQPOS_EXTINT2) |
(IRQPIN_EXTINT1 << IRQPOS_EXTINT1)), FPGA_INTSEL2);
/* FPGA + 0x0A */
- ctrl_outw((IRQPIN_PCCPW << IRQPOS_PCCPW), FPGA_INTSEL3);
+ __raw_writew((IRQPIN_PCCPW << IRQPOS_PCCPW), FPGA_INTSEL3);
plat_irq_setup_pins(IRQ_MODE_IRQ); /* install handlers for IRQ0-7 */
/* ICR1: detect low level(for 2ndcut) */
- ctrl_outl(0xAAAA0000, INTC_ICR1);
+ __raw_writel(0xAAAA0000, INTC_ICR1);
/*
* FPGA PCISEL register initialize
@@ -63,6 +63,6 @@ void __init init_se7780_IRQ(void)
* INTD || INTD | INTC | -- | INTA
* -------------------------------------
*/
- ctrl_outw(0x0013, FPGA_PCI_INTSEL1);
- ctrl_outw(0xE402, FPGA_PCI_INTSEL2);
+ __raw_writew(0x0013, FPGA_PCI_INTSEL1);
+ __raw_writew(0xE402, FPGA_PCI_INTSEL2);
}
diff --git a/arch/sh/boards/mach-se/7780/setup.c b/arch/sh/boards/mach-se/7780/setup.c
index f7bfb3f83692..6f7c207138e1 100644
--- a/arch/sh/boards/mach-se/7780/setup.c
+++ b/arch/sh/boards/mach-se/7780/setup.c
@@ -75,14 +75,14 @@ device_initcall(se7780_devices_setup);
static void __init se7780_setup(char **cmdline_p)
{
/* "SH-Linux" on LED Display */
- ctrl_outw( 'S' , PA_LED_DISP + (DISP_SEL0_ADDR << 1) );
- ctrl_outw( 'H' , PA_LED_DISP + (DISP_SEL1_ADDR << 1) );
- ctrl_outw( '-' , PA_LED_DISP + (DISP_SEL2_ADDR << 1) );
- ctrl_outw( 'L' , PA_LED_DISP + (DISP_SEL3_ADDR << 1) );
- ctrl_outw( 'i' , PA_LED_DISP + (DISP_SEL4_ADDR << 1) );
- ctrl_outw( 'n' , PA_LED_DISP + (DISP_SEL5_ADDR << 1) );
- ctrl_outw( 'u' , PA_LED_DISP + (DISP_SEL6_ADDR << 1) );
- ctrl_outw( 'x' , PA_LED_DISP + (DISP_SEL7_ADDR << 1) );
+ __raw_writew( 'S' , PA_LED_DISP + (DISP_SEL0_ADDR << 1) );
+ __raw_writew( 'H' , PA_LED_DISP + (DISP_SEL1_ADDR << 1) );
+ __raw_writew( '-' , PA_LED_DISP + (DISP_SEL2_ADDR << 1) );
+ __raw_writew( 'L' , PA_LED_DISP + (DISP_SEL3_ADDR << 1) );
+ __raw_writew( 'i' , PA_LED_DISP + (DISP_SEL4_ADDR << 1) );
+ __raw_writew( 'n' , PA_LED_DISP + (DISP_SEL5_ADDR << 1) );
+ __raw_writew( 'u' , PA_LED_DISP + (DISP_SEL6_ADDR << 1) );
+ __raw_writew( 'x' , PA_LED_DISP + (DISP_SEL7_ADDR << 1) );
printk(KERN_INFO "Hitachi UL Solutions Engine 7780SE03 support.\n");
@@ -93,15 +93,15 @@ static void __init se7780_setup(char **cmdline_p)
* REQ2/GNT2 -> Serial ATA
* REQ3/GNT3 -> PCI slot
*/
- ctrl_outw(0x0213, FPGA_REQSEL);
+ __raw_writew(0x0213, FPGA_REQSEL);
/* GPIO setting */
- ctrl_outw(0x0000, GPIO_PECR);
- ctrl_outw(ctrl_inw(GPIO_PHCR)&0xfff3, GPIO_PHCR);
- ctrl_outw(0x0c00, GPIO_PMSELR);
+ __raw_writew(0x0000, GPIO_PECR);
+ __raw_writew(__raw_readw(GPIO_PHCR)&0xfff3, GPIO_PHCR);
+ __raw_writew(0x0c00, GPIO_PMSELR);
/* iVDR Power ON */
- ctrl_outw(0x0001, FPGA_IVDRPW);
+ __raw_writew(0x0001, FPGA_IVDRPW);
}
/*
diff --git a/arch/sh/boards/mach-sh03/rtc.c b/arch/sh/boards/mach-sh03/rtc.c
index a8b9f844ab5b..1b200990500c 100644
--- a/arch/sh/boards/mach-sh03/rtc.c
+++ b/arch/sh/boards/mach-sh03/rtc.c
@@ -44,15 +44,15 @@ unsigned long get_cmos_time(void)
spin_lock(&sh03_rtc_lock);
again:
do {
- sec = (ctrl_inb(RTC_SEC1) & 0xf) + (ctrl_inb(RTC_SEC10) & 0x7) * 10;
- min = (ctrl_inb(RTC_MIN1) & 0xf) + (ctrl_inb(RTC_MIN10) & 0xf) * 10;
- hour = (ctrl_inb(RTC_HOU1) & 0xf) + (ctrl_inb(RTC_HOU10) & 0xf) * 10;
- day = (ctrl_inb(RTC_DAY1) & 0xf) + (ctrl_inb(RTC_DAY10) & 0xf) * 10;
- mon = (ctrl_inb(RTC_MON1) & 0xf) + (ctrl_inb(RTC_MON10) & 0xf) * 10;
- year = (ctrl_inb(RTC_YEA1) & 0xf) + (ctrl_inb(RTC_YEA10) & 0xf) * 10
- + (ctrl_inb(RTC_YEA100 ) & 0xf) * 100
- + (ctrl_inb(RTC_YEA1000) & 0xf) * 1000;
- } while (sec != (ctrl_inb(RTC_SEC1) & 0xf) + (ctrl_inb(RTC_SEC10) & 0x7) * 10);
+ sec = (__raw_readb(RTC_SEC1) & 0xf) + (__raw_readb(RTC_SEC10) & 0x7) * 10;
+ min = (__raw_readb(RTC_MIN1) & 0xf) + (__raw_readb(RTC_MIN10) & 0xf) * 10;
+ hour = (__raw_readb(RTC_HOU1) & 0xf) + (__raw_readb(RTC_HOU10) & 0xf) * 10;
+ day = (__raw_readb(RTC_DAY1) & 0xf) + (__raw_readb(RTC_DAY10) & 0xf) * 10;
+ mon = (__raw_readb(RTC_MON1) & 0xf) + (__raw_readb(RTC_MON10) & 0xf) * 10;
+ year = (__raw_readb(RTC_YEA1) & 0xf) + (__raw_readb(RTC_YEA10) & 0xf) * 10
+ + (__raw_readb(RTC_YEA100 ) & 0xf) * 100
+ + (__raw_readb(RTC_YEA1000) & 0xf) * 1000;
+ } while (sec != (__raw_readb(RTC_SEC1) & 0xf) + (__raw_readb(RTC_SEC10) & 0x7) * 10);
if (year == 0 || mon < 1 || mon > 12 || day > 31 || day < 1 ||
hour > 23 || min > 59 || sec > 59) {
printk(KERN_ERR
@@ -60,16 +60,16 @@ unsigned long get_cmos_time(void)
printk("year=%d, mon=%d, day=%d, hour=%d, min=%d, sec=%d\n",
year, mon, day, hour, min, sec);
- ctrl_outb(0, RTC_SEC1); ctrl_outb(0, RTC_SEC10);
- ctrl_outb(0, RTC_MIN1); ctrl_outb(0, RTC_MIN10);
- ctrl_outb(0, RTC_HOU1); ctrl_outb(0, RTC_HOU10);
- ctrl_outb(6, RTC_WEE1);
- ctrl_outb(1, RTC_DAY1); ctrl_outb(0, RTC_DAY10);
- ctrl_outb(1, RTC_MON1); ctrl_outb(0, RTC_MON10);
- ctrl_outb(0, RTC_YEA1); ctrl_outb(0, RTC_YEA10);
- ctrl_outb(0, RTC_YEA100);
- ctrl_outb(2, RTC_YEA1000);
- ctrl_outb(0, RTC_CTL);
+ __raw_writeb(0, RTC_SEC1); __raw_writeb(0, RTC_SEC10);
+ __raw_writeb(0, RTC_MIN1); __raw_writeb(0, RTC_MIN10);
+ __raw_writeb(0, RTC_HOU1); __raw_writeb(0, RTC_HOU10);
+ __raw_writeb(6, RTC_WEE1);
+ __raw_writeb(1, RTC_DAY1); __raw_writeb(0, RTC_DAY10);
+ __raw_writeb(1, RTC_MON1); __raw_writeb(0, RTC_MON10);
+ __raw_writeb(0, RTC_YEA1); __raw_writeb(0, RTC_YEA10);
+ __raw_writeb(0, RTC_YEA100);
+ __raw_writeb(2, RTC_YEA1000);
+ __raw_writeb(0, RTC_CTL);
goto again;
}
@@ -93,9 +93,9 @@ static int set_rtc_mmss(unsigned long nowtime)
/* gets recalled with irq locally disabled */
spin_lock(&sh03_rtc_lock);
for (i = 0 ; i < 1000000 ; i++) /* may take up to 1 second... */
- if (!(ctrl_inb(RTC_CTL) & RTC_BUSY))
+ if (!(__raw_readb(RTC_CTL) & RTC_BUSY))
break;
- cmos_minutes = (ctrl_inb(RTC_MIN1) & 0xf) + (ctrl_inb(RTC_MIN10) & 0xf) * 10;
+ cmos_minutes = (__raw_readb(RTC_MIN1) & 0xf) + (__raw_readb(RTC_MIN10) & 0xf) * 10;
real_seconds = nowtime % 60;
real_minutes = nowtime / 60;
if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
@@ -103,10 +103,10 @@ static int set_rtc_mmss(unsigned long nowtime)
real_minutes %= 60;
if (abs(real_minutes - cmos_minutes) < 30) {
- ctrl_outb(real_seconds % 10, RTC_SEC1);
- ctrl_outb(real_seconds / 10, RTC_SEC10);
- ctrl_outb(real_minutes % 10, RTC_MIN1);
- ctrl_outb(real_minutes / 10, RTC_MIN10);
+ __raw_writeb(real_seconds % 10, RTC_SEC1);
+ __raw_writeb(real_seconds / 10, RTC_SEC10);
+ __raw_writeb(real_minutes % 10, RTC_MIN1);
+ __raw_writeb(real_minutes / 10, RTC_MIN10);
} else {
printk(KERN_WARNING
"set_rtc_mmss: can't update from %d to %d\n",
diff --git a/arch/sh/boards/mach-sh7763rdp/irq.c b/arch/sh/boards/mach-sh7763rdp/irq.c
index d8ebfa7d8c76..add698c8f2b4 100644
--- a/arch/sh/boards/mach-sh7763rdp/irq.c
+++ b/arch/sh/boards/mach-sh7763rdp/irq.c
@@ -28,18 +28,18 @@
void __init init_sh7763rdp_IRQ(void)
{
/* GPIO enabled */
- ctrl_outl(1 << 25, INTC_INT2MSKCR);
+ __raw_writel(1 << 25, INTC_INT2MSKCR);
/* enable GPIO interrupts */
- ctrl_outl((ctrl_inl(INTC_INT2PRI7) & 0xFF00FFFF) | 0x000F0000,
+ __raw_writel((__raw_readl(INTC_INT2PRI7) & 0xFF00FFFF) | 0x000F0000,
INTC_INT2PRI7);
/* USBH enabled */
- ctrl_outl(1 << 17, INTC_INT2MSKCR1);
+ __raw_writel(1 << 17, INTC_INT2MSKCR1);
/* GETHER enabled */
- ctrl_outl(1 << 16, INTC_INT2MSKCR1);
+ __raw_writel(1 << 16, INTC_INT2MSKCR1);
/* DMAC enabled */
- ctrl_outl(1 << 8, INTC_INT2MSKCR);
+ __raw_writel(1 << 8, INTC_INT2MSKCR);
}
diff --git a/arch/sh/boards/mach-sh7763rdp/setup.c b/arch/sh/boards/mach-sh7763rdp/setup.c
index 390534a0b35c..f64a6918224c 100644
--- a/arch/sh/boards/mach-sh7763rdp/setup.c
+++ b/arch/sh/boards/mach-sh7763rdp/setup.c
@@ -158,50 +158,50 @@ device_initcall(sh7763rdp_devices_setup);
static void __init sh7763rdp_setup(char **cmdline_p)
{
/* Board version check */
- if (ctrl_inw(CPLD_BOARD_ID_ERV_REG) == 0xECB1)
+ if (__raw_readw(CPLD_BOARD_ID_ERV_REG) == 0xECB1)
printk(KERN_INFO "RTE Standard Configuration\n");
else
printk(KERN_INFO "RTA Standard Configuration\n");
/* USB pin select bits (clear bit 5-2 to 0) */
- ctrl_outw((ctrl_inw(PORT_PSEL2) & 0xFFC3), PORT_PSEL2);
+ __raw_writew((__raw_readw(PORT_PSEL2) & 0xFFC3), PORT_PSEL2);
/* USBH setup port I controls to other (clear bits 4-9 to 0) */
- ctrl_outw(ctrl_inw(PORT_PICR) & 0xFC0F, PORT_PICR);
+ __raw_writew(__raw_readw(PORT_PICR) & 0xFC0F, PORT_PICR);
/* Select USB Host controller */
- ctrl_outw(0x00, USB_USBHSC);
+ __raw_writew(0x00, USB_USBHSC);
/* For LCD */
/* set PTJ7-1, bits 15-2 of PJCR to 0 */
- ctrl_outw(ctrl_inw(PORT_PJCR) & 0x0003, PORT_PJCR);
+ __raw_writew(__raw_readw(PORT_PJCR) & 0x0003, PORT_PJCR);
/* set PTI5, bits 11-10 of PICR to 0 */
- ctrl_outw(ctrl_inw(PORT_PICR) & 0xF3FF, PORT_PICR);
- ctrl_outw(0, PORT_PKCR);
- ctrl_outw(0, PORT_PLCR);
+ __raw_writew(__raw_readw(PORT_PICR) & 0xF3FF, PORT_PICR);
+ __raw_writew(0, PORT_PKCR);
+ __raw_writew(0, PORT_PLCR);
/* set PSEL2 bits 14-8, 5-4, of PSEL2 to 0 */
- ctrl_outw((ctrl_inw(PORT_PSEL2) & 0x00C0), PORT_PSEL2);
+ __raw_writew((__raw_readw(PORT_PSEL2) & 0x00C0), PORT_PSEL2);
/* set PSEL3 bits 14-12, 6-4, 2-0 of PSEL3 to 0 */
- ctrl_outw((ctrl_inw(PORT_PSEL3) & 0x0700), PORT_PSEL3);
+ __raw_writew((__raw_readw(PORT_PSEL3) & 0x0700), PORT_PSEL3);
/* For HAC */
/* bit3-0 0100:HAC & SSI1 enable */
- ctrl_outw((ctrl_inw(PORT_PSEL1) & 0xFFF0) | 0x0004, PORT_PSEL1);
+ __raw_writew((__raw_readw(PORT_PSEL1) & 0xFFF0) | 0x0004, PORT_PSEL1);
/* bit14 1:SSI_HAC_CLK enable */
- ctrl_outw(ctrl_inw(PORT_PSEL4) | 0x4000, PORT_PSEL4);
+ __raw_writew(__raw_readw(PORT_PSEL4) | 0x4000, PORT_PSEL4);
/* SH-Ether */
- ctrl_outw((ctrl_inw(PORT_PSEL1) & ~0xff00) | 0x2400, PORT_PSEL1);
- ctrl_outw(0x0, PORT_PFCR);
- ctrl_outw(0x0, PORT_PFCR);
- ctrl_outw(0x0, PORT_PFCR);
+ __raw_writew((__raw_readw(PORT_PSEL1) & ~0xff00) | 0x2400, PORT_PSEL1);
+ __raw_writew(0x0, PORT_PFCR);
+ __raw_writew(0x0, PORT_PFCR);
+ __raw_writew(0x0, PORT_PFCR);
/* MMC */
/*selects SCIF and MMC other functions */
- ctrl_outw(0x0001, PORT_PSEL0);
+ __raw_writew(0x0001, PORT_PSEL0);
/* MMC clock operates */
- ctrl_outl(ctrl_inl(MSTPCR1) & ~0x8, MSTPCR1);
- ctrl_outw(ctrl_inw(PORT_PACR) & ~0x3000, PORT_PACR);
- ctrl_outw(ctrl_inw(PORT_PCCR) & ~0xCFC3, PORT_PCCR);
+ __raw_writel(__raw_readl(MSTPCR1) & ~0x8, MSTPCR1);
+ __raw_writew(__raw_readw(PORT_PACR) & ~0x3000, PORT_PACR);
+ __raw_writew(__raw_readw(PORT_PCCR) & ~0xCFC3, PORT_PCCR);
}
static struct sh_machine_vector mv_sh7763rdp __initmv = {
diff --git a/arch/sh/boards/mach-snapgear/setup.c b/arch/sh/boards/mach-snapgear/setup.c
index a3277a23cf14..331745dee379 100644
--- a/arch/sh/boards/mach-snapgear/setup.c
+++ b/arch/sh/boards/mach-snapgear/setup.c
@@ -30,7 +30,7 @@
static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id)
{
- (void)ctrl_inb(0xb8000000); /* dummy read */
+ (void)__raw_readb(0xb8000000); /* dummy read */
printk("SnapGear: erase switch interrupt!\n");
diff --git a/arch/sh/boards/mach-systemh/irq.c b/arch/sh/boards/mach-systemh/irq.c
index 986a0e71d220..523aea5dc94e 100644
--- a/arch/sh/boards/mach-systemh/irq.c
+++ b/arch/sh/boards/mach-systemh/irq.c
@@ -41,13 +41,13 @@ static void disable_systemh_irq(unsigned int irq)
unsigned long val, mask = 0x01 << 1;
/* Clear the "irq"th bit in the mask and set it in the request */
- val = ctrl_inl((unsigned long)systemh_irq_mask_register);
+ val = __raw_readl((unsigned long)systemh_irq_mask_register);
val &= ~mask;
- ctrl_outl(val, (unsigned long)systemh_irq_mask_register);
+ __raw_writel(val, (unsigned long)systemh_irq_mask_register);
- val = ctrl_inl((unsigned long)systemh_irq_request_register);
+ val = __raw_readl((unsigned long)systemh_irq_request_register);
val |= mask;
- ctrl_outl(val, (unsigned long)systemh_irq_request_register);
+ __raw_writel(val, (unsigned long)systemh_irq_request_register);
}
}
@@ -57,9 +57,9 @@ static void enable_systemh_irq(unsigned int irq)
unsigned long val, mask = 0x01 << 1;
/* Set "irq"th bit in the mask register */
- val = ctrl_inl((unsigned long)systemh_irq_mask_register);
+ val = __raw_readl((unsigned long)systemh_irq_mask_register);
val |= mask;
- ctrl_outl(val, (unsigned long)systemh_irq_mask_register);
+ __raw_writel(val, (unsigned long)systemh_irq_mask_register);
}
}
diff --git a/arch/sh/boards/mach-titan/io.c b/arch/sh/boards/mach-titan/io.c
index 0130e9826aca..29754c5091f0 100644
--- a/arch/sh/boards/mach-titan/io.c
+++ b/arch/sh/boards/mach-titan/io.c
@@ -16,8 +16,8 @@ static inline unsigned int port2adr(unsigned int port)
u8 titan_inb(unsigned long port)
{
if (PXSEG(port))
- return ctrl_inb(port);
- return ctrl_inw(port2adr(port)) & 0xff;
+ return __raw_readb(port);
+ return __raw_readw(port2adr(port)) & 0xff;
}
u8 titan_inb_p(unsigned long port)
@@ -25,9 +25,9 @@ u8 titan_inb_p(unsigned long port)
u8 v;
if (PXSEG(port))
- v = ctrl_inb(port);
+ v = __raw_readb(port);
else
- v = ctrl_inw(port2adr(port)) & 0xff;
+ v = __raw_readw(port2adr(port)) & 0xff;
ctrl_delay();
return v;
}
@@ -35,9 +35,9 @@ u8 titan_inb_p(unsigned long port)
u16 titan_inw(unsigned long port)
{
if (PXSEG(port))
- return ctrl_inw(port);
+ return __raw_readw(port);
else if (port >= 0x2000)
- return ctrl_inw(port2adr(port));
+ return __raw_readw(port2adr(port));
else
maybebadio(port);
return 0;
@@ -46,9 +46,9 @@ u16 titan_inw(unsigned long port)
u32 titan_inl(unsigned long port)
{
if (PXSEG(port))
- return ctrl_inl(port);
+ return __raw_readl(port);
else if (port >= 0x2000)
- return ctrl_inw(port2adr(port));
+ return __raw_readw(port2adr(port));
else
maybebadio(port);
return 0;
@@ -57,26 +57,26 @@ u32 titan_inl(unsigned long port)
void titan_outb(u8 value, unsigned long port)
{
if (PXSEG(port))
- ctrl_outb(value, port);
+ __raw_writeb(value, port);
else
- ctrl_outw(value, port2adr(port));
+ __raw_writew(value, port2adr(port));
}
void titan_outb_p(u8 value, unsigned long port)
{
if (PXSEG(port))
- ctrl_outb(value, port);
+ __raw_writeb(value, port);
else
- ctrl_outw(value, port2adr(port));
+ __raw_writew(value, port2adr(port));
ctrl_delay();
}
void titan_outw(u16 value, unsigned long port)
{
if (PXSEG(port))
- ctrl_outw(value, port);
+ __raw_writew(value, port);
else if (port >= 0x2000)
- ctrl_outw(value, port2adr(port));
+ __raw_writew(value, port2adr(port));
else
maybebadio(port);
}
@@ -84,7 +84,7 @@ void titan_outw(u16 value, unsigned long port)
void titan_outl(u32 value, unsigned long port)
{
if (PXSEG(port))
- ctrl_outl(value, port);
+ __raw_writel(value, port);
else
maybebadio(port);
}
diff --git a/arch/sh/boards/mach-x3proto/ilsel.c b/arch/sh/boards/mach-x3proto/ilsel.c
index b5c673c39337..5c9842704c60 100644
--- a/arch/sh/boards/mach-x3proto/ilsel.c
+++ b/arch/sh/boards/mach-x3proto/ilsel.c
@@ -70,10 +70,10 @@ static void __ilsel_enable(ilsel_source_t set, unsigned int bit)
pr_debug("%s: bit#%d: addr - 0x%08lx (shift %d, set %d)\n",
__func__, bit, addr, shift, set);
- tmp = ctrl_inw(addr);
+ tmp = __raw_readw(addr);
tmp &= ~(0xf << shift);
tmp |= set << shift;
- ctrl_outw(tmp, addr);
+ __raw_writew(tmp, addr);
}
/**
@@ -142,9 +142,9 @@ void ilsel_disable(unsigned int irq)
addr = mk_ilsel_addr(irq);
- tmp = ctrl_inw(addr);
+ tmp = __raw_readw(addr);
tmp &= ~(0xf << mk_ilsel_shift(irq));
- ctrl_outw(tmp, addr);
+ __raw_writew(tmp, addr);
clear_bit(irq, &ilsel_level_map);
}
diff --git a/arch/sh/boards/mach-x3proto/setup.c b/arch/sh/boards/mach-x3proto/setup.c
index efe4cb9f8a77..e284592fd42a 100644
--- a/arch/sh/boards/mach-x3proto/setup.c
+++ b/arch/sh/boards/mach-x3proto/setup.c
@@ -149,7 +149,7 @@ static void __init x3proto_init_irq(void)
plat_irq_setup_pins(IRQ_MODE_IRL3210);
/* Set ICR0.LVLMODE */
- ctrl_outl(ctrl_inl(0xfe410000) | (1 << 21), 0xfe410000);
+ __raw_writel(__raw_readl(0xfe410000) | (1 << 21), 0xfe410000);
}
static struct sh_machine_vector mv_x3proto __initmv = {