diff options
Diffstat (limited to 'arch/x86/entry/entry_64.S')
| -rw-r--r-- | arch/x86/entry/entry_64.S | 223 |
1 files changed, 100 insertions, 123 deletions
diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S index 30c8c5344c4a..18ed349b4f83 100644 --- a/arch/x86/entry/entry_64.S +++ b/arch/x86/entry/entry_64.S @@ -55,7 +55,7 @@ END(native_usergs_sysret64) .macro TRACE_IRQS_FLAGS flags:req #ifdef CONFIG_TRACE_IRQFLAGS - bt $9, \flags /* interrupts off? */ + btl $9, \flags /* interrupts off? */ jnc 1f TRACE_IRQS_ON 1: @@ -213,7 +213,7 @@ ENTRY(entry_SYSCALL_64) swapgs /* - * This path is not taken when PAGE_TABLE_ISOLATION is disabled so it + * This path is only taken when PAGE_TABLE_ISOLATION is disabled so it * is not required to switch CR3. */ movq %rsp, PER_CPU_VAR(rsp_scratch) @@ -227,22 +227,8 @@ ENTRY(entry_SYSCALL_64) pushq %rcx /* pt_regs->ip */ GLOBAL(entry_SYSCALL_64_after_hwframe) pushq %rax /* pt_regs->orig_ax */ - pushq %rdi /* pt_regs->di */ - pushq %rsi /* pt_regs->si */ - pushq %rdx /* pt_regs->dx */ - pushq %rcx /* pt_regs->cx */ - pushq $-ENOSYS /* pt_regs->ax */ - pushq %r8 /* pt_regs->r8 */ - pushq %r9 /* pt_regs->r9 */ - pushq %r10 /* pt_regs->r10 */ - pushq %r11 /* pt_regs->r11 */ - pushq %rbx /* pt_regs->rbx */ - pushq %rbp /* pt_regs->rbp */ - pushq %r12 /* pt_regs->r12 */ - pushq %r13 /* pt_regs->r13 */ - pushq %r14 /* pt_regs->r14 */ - pushq %r15 /* pt_regs->r15 */ - UNWIND_HINT_REGS + + PUSH_AND_CLEAR_REGS rax=$-ENOSYS TRACE_IRQS_OFF @@ -321,15 +307,7 @@ GLOBAL(entry_SYSCALL_64_after_hwframe) syscall_return_via_sysret: /* rcx and r11 are already restored (see code above) */ UNWIND_HINT_EMPTY - POP_EXTRA_REGS - popq %rsi /* skip r11 */ - popq %r10 - popq %r9 - popq %r8 - popq %rax - popq %rsi /* skip rcx */ - popq %rdx - popq %rsi + POP_REGS pop_rdi=0 skip_r11rcx=1 /* * Now all regs are restored except RSP and RDI. @@ -386,8 +364,7 @@ ENTRY(__switch_to_asm) * exist, overwrite the RSB with entries which capture * speculative execution to prevent attack. */ - /* Clobbers %rbx */ - FILL_RETURN_BUFFER RSB_CLEAR_LOOPS, X86_FEATURE_RSB_CTXSW + FILL_RETURN_BUFFER %r12, RSB_CLEAR_LOOPS, X86_FEATURE_RSB_CTXSW #endif /* restore callee-saved registers */ @@ -471,9 +448,19 @@ END(irq_entries_start) * * The invariant is that, if irq_count != -1, then the IRQ stack is in use. */ -.macro ENTER_IRQ_STACK regs=1 old_rsp +.macro ENTER_IRQ_STACK regs=1 old_rsp save_ret=0 DEBUG_ENTRY_ASSERT_IRQS_OFF + + .if \save_ret + /* + * If save_ret is set, the original stack contains one additional + * entry -- the return address. Therefore, move the address one + * entry below %rsp to \old_rsp. + */ + leaq 8(%rsp), \old_rsp + .else movq %rsp, \old_rsp + .endif .if \regs UNWIND_HINT_REGS base=\old_rsp @@ -519,6 +506,15 @@ END(irq_entries_start) .if \regs UNWIND_HINT_REGS indirect=1 .endif + + .if \save_ret + /* + * Push the return address to the stack. This return address can + * be found at the "real" original RSP, which was offset by 8 at + * the beginning of this macro. + */ + pushq -8(\old_rsp) + .endif .endm /* @@ -542,29 +538,65 @@ END(irq_entries_start) .endm /* - * Interrupt entry/exit. - * - * Interrupt entry points save only callee clobbered registers in fast path. + * Interrupt entry helper function. * - * Entry runs with interrupts off. + * Entry runs with interrupts off. Stack layout at entry: + * +----------------------------------------------------+ + * | regs->ss | + * | regs->rsp | + * | regs->eflags | + * | regs->cs | + * | regs->ip | + * +----------------------------------------------------+ + * | regs->orig_ax = ~(interrupt number) | + * +----------------------------------------------------+ + * | return address | + * +----------------------------------------------------+ */ - -/* 0(%rsp): ~(interrupt number) */ - .macro interrupt func +ENTRY(interrupt_entry) + UNWIND_HINT_FUNC + ASM_CLAC cld - testb $3, CS-ORIG_RAX(%rsp) + testb $3, CS-ORIG_RAX+8(%rsp) jz 1f SWAPGS - call switch_to_thread_stack + + /* + * Switch to the thread stack. The IRET frame and orig_ax are + * on the stack, as well as the return address. RDI..R12 are + * not (yet) on the stack and space has not (yet) been + * allocated for them. + */ + pushq %rdi + + /* Need to switch before accessing the thread stack. */ + SWITCH_TO_KERNEL_CR3 scratch_reg=%rdi + movq %rsp, %rdi + movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp + + /* + * We have RDI, return address, and orig_ax on the stack on + * top of the IRET frame. That means offset=24 + */ + UNWIND_HINT_IRET_REGS base=%rdi offset=24 + + pushq 7*8(%rdi) /* regs->ss */ + pushq 6*8(%rdi) /* regs->rsp */ + pushq 5*8(%rdi) /* regs->eflags */ + pushq 4*8(%rdi) /* regs->cs */ + pushq 3*8(%rdi) /* regs->ip */ + pushq 2*8(%rdi) /* regs->orig_ax */ + pushq 8(%rdi) /* return address */ + UNWIND_HINT_FUNC + + movq (%rdi), %rdi 1: - ALLOC_PT_GPREGS_ON_STACK - SAVE_C_REGS - SAVE_EXTRA_REGS - ENCODE_FRAME_POINTER + PUSH_AND_CLEAR_REGS save_ret=1 + ENCODE_FRAME_POINTER 8 - testb $3, CS(%rsp) + testb $3, CS+8(%rsp) jz 1f /* @@ -572,7 +604,7 @@ END(irq_entries_start) * * We need to tell lockdep that IRQs are off. We can't do this until * we fix gsbase, and we should do it before enter_from_user_mode - * (which can take locks). Since TRACE_IRQS_OFF idempotent, + * (which can take locks). Since TRACE_IRQS_OFF is idempotent, * the simplest way to handle it is to just call it twice if * we enter from user mode. There's no reason to optimize this since * TRACE_IRQS_OFF is a no-op if lockdep is off. @@ -582,12 +614,15 @@ END(irq_entries_start) CALL_enter_from_user_mode 1: - ENTER_IRQ_STACK old_rsp=%rdi + ENTER_IRQ_STACK old_rsp=%rdi save_ret=1 /* We entered an interrupt context - irqs are off: */ TRACE_IRQS_OFF - call \func /* rdi points to pt_regs */ - .endm + ret +END(interrupt_entry) + + +/* Interrupt entry/exit. */ /* * The interrupt stubs push (~vector+0x80) onto the stack and @@ -595,9 +630,10 @@ END(irq_entries_start) */ .p2align CONFIG_X86_L1_CACHE_SHIFT common_interrupt: - ASM_CLAC addq $-0x80, (%rsp) /* Adjust vector to [-256, -1] range */ - interrupt do_IRQ + call interrupt_entry + UNWIND_HINT_REGS indirect=1 + call do_IRQ /* rdi points to pt_regs */ /* 0(%rsp): old RSP */ ret_from_intr: DISABLE_INTERRUPTS(CLBR_ANY) @@ -622,15 +658,7 @@ GLOBAL(swapgs_restore_regs_and_return_to_usermode) ud2 1: #endif - POP_EXTRA_REGS - popq %r11 - popq %r10 - popq %r9 - popq %r8 - popq %rax - popq %rcx - popq %rdx - popq %rsi + POP_REGS pop_rdi=0 /* * The stack is now user RDI, orig_ax, RIP, CS, EFLAGS, RSP, SS. @@ -688,8 +716,7 @@ GLOBAL(restore_regs_and_return_to_kernel) ud2 1: #endif - POP_EXTRA_REGS - POP_C_REGS + POP_REGS addq $8, %rsp /* skip regs->orig_ax */ /* * ARCH_HAS_MEMBARRIER_SYNC_CORE rely on IRET core serialization @@ -799,10 +826,11 @@ END(common_interrupt) .macro apicinterrupt3 num sym do_sym ENTRY(\sym) UNWIND_HINT_IRET_REGS - ASM_CLAC pushq $~(\num) .Lcommon_\sym: - interrupt \do_sym + call interrupt_entry + UNWIND_HINT_REGS indirect=1 + call \do_sym /* rdi points to pt_regs */ jmp ret_from_intr END(\sym) .endm @@ -865,34 +893,6 @@ apicinterrupt IRQ_WORK_VECTOR irq_work_interrupt smp_irq_work_interrupt */ #define CPU_TSS_IST(x) PER_CPU_VAR(cpu_tss_rw) + (TSS_ist + ((x) - 1) * 8) -/* - * Switch to the thread stack. This is called with the IRET frame and - * orig_ax on the stack. (That is, RDI..R12 are not on the stack and - * space has not been allocated for them.) - */ -ENTRY(switch_to_thread_stack) - UNWIND_HINT_FUNC - - pushq %rdi - /* Need to switch before accessing the thread stack. */ - SWITCH_TO_KERNEL_CR3 scratch_reg=%rdi - movq %rsp, %rdi - movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp - UNWIND_HINT sp_offset=16 sp_reg=ORC_REG_DI - - pushq 7*8(%rdi) /* regs->ss */ - pushq 6*8(%rdi) /* regs->rsp */ - pushq 5*8(%rdi) /* regs->eflags */ - pushq 4*8(%rdi) /* regs->cs */ - pushq 3*8(%rdi) /* regs->ip */ - pushq 2*8(%rdi) /* regs->orig_ax */ - pushq 8(%rdi) /* return address */ - UNWIND_HINT_FUNC - - movq (%rdi), %rdi - ret -END(switch_to_thread_stack) - .macro idtentry sym do_sym has_error_code:req paranoid=0 shift_ist=-1 ENTRY(\sym) UNWIND_HINT_IRET_REGS offset=\has_error_code*8 @@ -908,10 +908,8 @@ ENTRY(\sym) pushq $-1 /* ORIG_RAX: no syscall to restart */ .endif - ALLOC_PT_GPREGS_ON_STACK - .if \paranoid < 2 - testb $3, CS(%rsp) /* If coming from userspace, switch stacks */ + testb $3, CS-ORIG_RAX(%rsp) /* If coming from userspace, switch stacks */ jnz .Lfrom_usermode_switch_stack_\@ .endif @@ -1121,9 +1119,7 @@ ENTRY(xen_failsafe_callback) addq $0x30, %rsp UNWIND_HINT_IRET_REGS pushq $-1 /* orig_ax = -1 => not a system call */ - ALLOC_PT_GPREGS_ON_STACK - SAVE_C_REGS - SAVE_EXTRA_REGS + PUSH_AND_CLEAR_REGS ENCODE_FRAME_POINTER jmp error_exit END(xen_failsafe_callback) @@ -1142,7 +1138,7 @@ apicinterrupt3 HYPERV_REENLIGHTENMENT_VECTOR \ #endif /* CONFIG_HYPERV */ idtentry debug do_debug has_error_code=0 paranoid=1 shift_ist=DEBUG_STACK -idtentry int3 do_int3 has_error_code=0 paranoid=1 shift_ist=DEBUG_STACK +idtentry int3 do_int3 has_error_code=0 idtentry stack_segment do_stack_segment has_error_code=1 #ifdef CONFIG_XEN @@ -1170,8 +1166,7 @@ idtentry machine_check do_mce has_error_code=0 paranoid=1 ENTRY(paranoid_entry) UNWIND_HINT_FUNC cld - SAVE_C_REGS 8 - SAVE_EXTRA_REGS 8 + PUSH_AND_CLEAR_REGS save_ret=1 ENCODE_FRAME_POINTER 8 movl $1, %ebx movl $MSR_GS_BASE, %ecx @@ -1211,21 +1206,20 @@ ENTRY(paranoid_exit) jmp .Lparanoid_exit_restore .Lparanoid_exit_no_swapgs: TRACE_IRQS_IRETQ_DEBUG + RESTORE_CR3 scratch_reg=%rbx save_reg=%r14 .Lparanoid_exit_restore: jmp restore_regs_and_return_to_kernel END(paranoid_exit) /* - * Save all registers in pt_regs, and switch gs if needed. + * Save all registers in pt_regs, and switch GS if needed. * Return: EBX=0: came from user mode; EBX=1: otherwise */ ENTRY(error_entry) UNWIND_HINT_FUNC cld - SAVE_C_REGS 8 - SAVE_EXTRA_REGS 8 + PUSH_AND_CLEAR_REGS save_ret=1 ENCODE_FRAME_POINTER 8 - xorl %ebx, %ebx testb $3, CS+8(%rsp) jz .Lerror_kernelspace @@ -1406,22 +1400,7 @@ ENTRY(nmi) pushq 1*8(%rdx) /* pt_regs->rip */ UNWIND_HINT_IRET_REGS pushq $-1 /* pt_regs->orig_ax */ - pushq %rdi /* pt_regs->di */ - pushq %rsi /* pt_regs->si */ - pushq (%rdx) /* pt_regs->dx */ - pushq %rcx /* pt_regs->cx */ - pushq %rax /* pt_regs->ax */ - pushq %r8 /* pt_regs->r8 */ - pushq %r9 /* pt_regs->r9 */ - pushq %r10 /* pt_regs->r10 */ - pushq %r11 /* pt_regs->r11 */ - pushq %rbx /* pt_regs->rbx */ - pushq %rbp /* pt_regs->rbp */ - pushq %r12 /* pt_regs->r12 */ - pushq %r13 /* pt_regs->r13 */ - pushq %r14 /* pt_regs->r14 */ - pushq %r15 /* pt_regs->r15 */ - UNWIND_HINT_REGS + PUSH_AND_CLEAR_REGS rdx=(%rdx) ENCODE_FRAME_POINTER /* @@ -1631,7 +1610,6 @@ end_repeat_nmi: * frame to point back to repeat_nmi. */ pushq $-1 /* ORIG_RAX: no syscall to restart */ - ALLOC_PT_GPREGS_ON_STACK /* * Use paranoid_entry to handle SWAPGS, but no need to use paranoid_exit @@ -1655,8 +1633,7 @@ end_repeat_nmi: nmi_swapgs: SWAPGS_UNSAFE_STACK nmi_restore: - POP_EXTRA_REGS - POP_C_REGS + POP_REGS /* * Skip orig_ax and the "outermost" frame to point RSP at the "iret" |