summaryrefslogtreecommitdiff
path: root/arch/x86/entry
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86/entry')
-rw-r--r--arch/x86/entry/calling.h147
-rw-r--r--arch/x86/entry/entry_32.S34
-rw-r--r--arch/x86/entry/entry_64.S264
-rw-r--r--arch/x86/entry/entry_64_compat.S32
-rw-r--r--arch/x86/entry/vsyscall/vsyscall_64.c38
5 files changed, 467 insertions, 48 deletions
diff --git a/arch/x86/entry/calling.h b/arch/x86/entry/calling.h
index 3fd8bc560fae..3f48f695d5e6 100644
--- a/arch/x86/entry/calling.h
+++ b/arch/x86/entry/calling.h
@@ -1,6 +1,11 @@
/* SPDX-License-Identifier: GPL-2.0 */
#include <linux/jump_label.h>
#include <asm/unwind_hints.h>
+#include <asm/cpufeatures.h>
+#include <asm/page_types.h>
+#include <asm/percpu.h>
+#include <asm/asm-offsets.h>
+#include <asm/processor-flags.h>
/*
@@ -187,6 +192,148 @@ For 32-bit we have the following conventions - kernel is built with
#endif
.endm
+#ifdef CONFIG_PAGE_TABLE_ISOLATION
+
+/*
+ * PAGE_TABLE_ISOLATION PGDs are 8k. Flip bit 12 to switch between the two
+ * halves:
+ */
+#define PTI_USER_PGTABLE_BIT PAGE_SHIFT
+#define PTI_USER_PGTABLE_MASK (1 << PTI_USER_PGTABLE_BIT)
+#define PTI_USER_PCID_BIT X86_CR3_PTI_PCID_USER_BIT
+#define PTI_USER_PCID_MASK (1 << PTI_USER_PCID_BIT)
+#define PTI_USER_PGTABLE_AND_PCID_MASK (PTI_USER_PCID_MASK | PTI_USER_PGTABLE_MASK)
+
+.macro SET_NOFLUSH_BIT reg:req
+ bts $X86_CR3_PCID_NOFLUSH_BIT, \reg
+.endm
+
+.macro ADJUST_KERNEL_CR3 reg:req
+ ALTERNATIVE "", "SET_NOFLUSH_BIT \reg", X86_FEATURE_PCID
+ /* Clear PCID and "PAGE_TABLE_ISOLATION bit", point CR3 at kernel pagetables: */
+ andq $(~PTI_USER_PGTABLE_AND_PCID_MASK), \reg
+.endm
+
+.macro SWITCH_TO_KERNEL_CR3 scratch_reg:req
+ ALTERNATIVE "jmp .Lend_\@", "", X86_FEATURE_PTI
+ mov %cr3, \scratch_reg
+ ADJUST_KERNEL_CR3 \scratch_reg
+ mov \scratch_reg, %cr3
+.Lend_\@:
+.endm
+
+#define THIS_CPU_user_pcid_flush_mask \
+ PER_CPU_VAR(cpu_tlbstate) + TLB_STATE_user_pcid_flush_mask
+
+.macro SWITCH_TO_USER_CR3_NOSTACK scratch_reg:req scratch_reg2:req
+ ALTERNATIVE "jmp .Lend_\@", "", X86_FEATURE_PTI
+ mov %cr3, \scratch_reg
+
+ ALTERNATIVE "jmp .Lwrcr3_\@", "", X86_FEATURE_PCID
+
+ /*
+ * Test if the ASID needs a flush.
+ */
+ movq \scratch_reg, \scratch_reg2
+ andq $(0x7FF), \scratch_reg /* mask ASID */
+ bt \scratch_reg, THIS_CPU_user_pcid_flush_mask
+ jnc .Lnoflush_\@
+
+ /* Flush needed, clear the bit */
+ btr \scratch_reg, THIS_CPU_user_pcid_flush_mask
+ movq \scratch_reg2, \scratch_reg
+ jmp .Lwrcr3_pcid_\@
+
+.Lnoflush_\@:
+ movq \scratch_reg2, \scratch_reg
+ SET_NOFLUSH_BIT \scratch_reg
+
+.Lwrcr3_pcid_\@:
+ /* Flip the ASID to the user version */
+ orq $(PTI_USER_PCID_MASK), \scratch_reg
+
+.Lwrcr3_\@:
+ /* Flip the PGD to the user version */
+ orq $(PTI_USER_PGTABLE_MASK), \scratch_reg
+ mov \scratch_reg, %cr3
+.Lend_\@:
+.endm
+
+.macro SWITCH_TO_USER_CR3_STACK scratch_reg:req
+ pushq %rax
+ SWITCH_TO_USER_CR3_NOSTACK scratch_reg=\scratch_reg scratch_reg2=%rax
+ popq %rax
+.endm
+
+.macro SAVE_AND_SWITCH_TO_KERNEL_CR3 scratch_reg:req save_reg:req
+ ALTERNATIVE "jmp .Ldone_\@", "", X86_FEATURE_PTI
+ movq %cr3, \scratch_reg
+ movq \scratch_reg, \save_reg
+ /*
+ * Test the user pagetable bit. If set, then the user page tables
+ * are active. If clear CR3 already has the kernel page table
+ * active.
+ */
+ bt $PTI_USER_PGTABLE_BIT, \scratch_reg
+ jnc .Ldone_\@
+
+ ADJUST_KERNEL_CR3 \scratch_reg
+ movq \scratch_reg, %cr3
+
+.Ldone_\@:
+.endm
+
+.macro RESTORE_CR3 scratch_reg:req save_reg:req
+ ALTERNATIVE "jmp .Lend_\@", "", X86_FEATURE_PTI
+
+ ALTERNATIVE "jmp .Lwrcr3_\@", "", X86_FEATURE_PCID
+
+ /*
+ * KERNEL pages can always resume with NOFLUSH as we do
+ * explicit flushes.
+ */
+ bt $PTI_USER_PGTABLE_BIT, \save_reg
+ jnc .Lnoflush_\@
+
+ /*
+ * Check if there's a pending flush for the user ASID we're
+ * about to set.
+ */
+ movq \save_reg, \scratch_reg
+ andq $(0x7FF), \scratch_reg
+ bt \scratch_reg, THIS_CPU_user_pcid_flush_mask
+ jnc .Lnoflush_\@
+
+ btr \scratch_reg, THIS_CPU_user_pcid_flush_mask
+ jmp .Lwrcr3_\@
+
+.Lnoflush_\@:
+ SET_NOFLUSH_BIT \save_reg
+
+.Lwrcr3_\@:
+ /*
+ * The CR3 write could be avoided when not changing its value,
+ * but would require a CR3 read *and* a scratch register.
+ */
+ movq \save_reg, %cr3
+.Lend_\@:
+.endm
+
+#else /* CONFIG_PAGE_TABLE_ISOLATION=n: */
+
+.macro SWITCH_TO_KERNEL_CR3 scratch_reg:req
+.endm
+.macro SWITCH_TO_USER_CR3_NOSTACK scratch_reg:req scratch_reg2:req
+.endm
+.macro SWITCH_TO_USER_CR3_STACK scratch_reg:req
+.endm
+.macro SAVE_AND_SWITCH_TO_KERNEL_CR3 scratch_reg:req save_reg:req
+.endm
+.macro RESTORE_CR3 scratch_reg:req save_reg:req
+.endm
+
+#endif
+
#endif /* CONFIG_X86_64 */
/*
diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S
index 4838037f97f6..7a796eeddf99 100644
--- a/arch/x86/entry/entry_32.S
+++ b/arch/x86/entry/entry_32.S
@@ -44,6 +44,7 @@
#include <asm/asm.h>
#include <asm/smap.h>
#include <asm/frame.h>
+#include <asm/nospec-branch.h>
.section .entry.text, "ax"
@@ -243,6 +244,18 @@ ENTRY(__switch_to_asm)
movl %ebx, PER_CPU_VAR(stack_canary)+stack_canary_offset
#endif
+#ifdef CONFIG_RETPOLINE
+ /*
+ * When switching from a shallower to a deeper call stack
+ * the RSB may either underflow or use entries populated
+ * with userspace addresses. On CPUs where those concerns
+ * exist, overwrite the RSB with entries which capture
+ * speculative execution to prevent attack.
+ */
+ /* Clobbers %ebx */
+ FILL_RETURN_BUFFER RSB_CLEAR_LOOPS, X86_FEATURE_RSB_CTXSW
+#endif
+
/* restore callee-saved registers */
popl %esi
popl %edi
@@ -290,7 +303,7 @@ ENTRY(ret_from_fork)
/* kernel thread */
1: movl %edi, %eax
- call *%ebx
+ CALL_NOSPEC %ebx
/*
* A kernel thread is allowed to return here after successfully
* calling do_execve(). Exit to userspace to complete the execve()
@@ -882,6 +895,9 @@ BUILD_INTERRUPT3(xen_hvm_callback_vector, HYPERVISOR_CALLBACK_VECTOR,
BUILD_INTERRUPT3(hyperv_callback_vector, HYPERVISOR_CALLBACK_VECTOR,
hyperv_vector_handler)
+BUILD_INTERRUPT3(hyperv_reenlightenment_vector, HYPERV_REENLIGHTENMENT_VECTOR,
+ hyperv_reenlightenment_intr)
+
#endif /* CONFIG_HYPERV */
ENTRY(page_fault)
@@ -919,7 +935,7 @@ common_exception:
movl %ecx, %es
TRACE_IRQS_OFF
movl %esp, %eax # pt_regs pointer
- call *%edi
+ CALL_NOSPEC %edi
jmp ret_from_exception
END(common_exception)
@@ -941,9 +957,10 @@ ENTRY(debug)
movl %esp, %eax # pt_regs pointer
/* Are we currently on the SYSENTER stack? */
- PER_CPU(cpu_tss + CPU_TSS_SYSENTER_stack + SIZEOF_SYSENTER_stack, %ecx)
- subl %eax, %ecx /* ecx = (end of SYSENTER_stack) - esp */
- cmpl $SIZEOF_SYSENTER_stack, %ecx
+ movl PER_CPU_VAR(cpu_entry_area), %ecx
+ addl $CPU_ENTRY_AREA_entry_stack + SIZEOF_entry_stack, %ecx
+ subl %eax, %ecx /* ecx = (end of entry_stack) - esp */
+ cmpl $SIZEOF_entry_stack, %ecx
jb .Ldebug_from_sysenter_stack
TRACE_IRQS_OFF
@@ -984,9 +1001,10 @@ ENTRY(nmi)
movl %esp, %eax # pt_regs pointer
/* Are we currently on the SYSENTER stack? */
- PER_CPU(cpu_tss + CPU_TSS_SYSENTER_stack + SIZEOF_SYSENTER_stack, %ecx)
- subl %eax, %ecx /* ecx = (end of SYSENTER_stack) - esp */
- cmpl $SIZEOF_SYSENTER_stack, %ecx
+ movl PER_CPU_VAR(cpu_entry_area), %ecx
+ addl $CPU_ENTRY_AREA_entry_stack + SIZEOF_entry_stack, %ecx
+ subl %eax, %ecx /* ecx = (end of entry_stack) - esp */
+ cmpl $SIZEOF_entry_stack, %ecx
jb .Lnmi_from_sysenter_stack
/* Not on SYSENTER stack. */
diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S
index f81d50d7ceac..553aa49909ce 100644
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -23,7 +23,6 @@
#include <asm/segment.h>
#include <asm/cache.h>
#include <asm/errno.h>
-#include "calling.h"
#include <asm/asm-offsets.h>
#include <asm/msr.h>
#include <asm/unistd.h>
@@ -38,8 +37,11 @@
#include <asm/pgtable_types.h>
#include <asm/export.h>
#include <asm/frame.h>
+#include <asm/nospec-branch.h>
#include <linux/err.h>
+#include "calling.h"
+
.code64
.section .entry.text, "ax"
@@ -140,6 +142,67 @@ END(native_usergs_sysret64)
* with them due to bugs in both AMD and Intel CPUs.
*/
+ .pushsection .entry_trampoline, "ax"
+
+/*
+ * The code in here gets remapped into cpu_entry_area's trampoline. This means
+ * that the assembler and linker have the wrong idea as to where this code
+ * lives (and, in fact, it's mapped more than once, so it's not even at a
+ * fixed address). So we can't reference any symbols outside the entry
+ * trampoline and expect it to work.
+ *
+ * Instead, we carefully abuse %rip-relative addressing.
+ * _entry_trampoline(%rip) refers to the start of the remapped) entry
+ * trampoline. We can thus find cpu_entry_area with this macro:
+ */
+
+#define CPU_ENTRY_AREA \
+ _entry_trampoline - CPU_ENTRY_AREA_entry_trampoline(%rip)
+
+/* The top word of the SYSENTER stack is hot and is usable as scratch space. */
+#define RSP_SCRATCH CPU_ENTRY_AREA_entry_stack + \
+ SIZEOF_entry_stack - 8 + CPU_ENTRY_AREA
+
+ENTRY(entry_SYSCALL_64_trampoline)
+ UNWIND_HINT_EMPTY
+ swapgs
+
+ /* Stash the user RSP. */
+ movq %rsp, RSP_SCRATCH
+
+ /* Note: using %rsp as a scratch reg. */
+ SWITCH_TO_KERNEL_CR3 scratch_reg=%rsp
+
+ /* Load the top of the task stack into RSP */
+ movq CPU_ENTRY_AREA_tss + TSS_sp1 + CPU_ENTRY_AREA, %rsp
+
+ /* Start building the simulated IRET frame. */
+ pushq $__USER_DS /* pt_regs->ss */
+ pushq RSP_SCRATCH /* pt_regs->sp */
+ pushq %r11 /* pt_regs->flags */
+ pushq $__USER_CS /* pt_regs->cs */
+ pushq %rcx /* pt_regs->ip */
+
+ /*
+ * x86 lacks a near absolute jump, and we can't jump to the real
+ * entry text with a relative jump. We could push the target
+ * address and then use retq, but this destroys the pipeline on
+ * many CPUs (wasting over 20 cycles on Sandy Bridge). Instead,
+ * spill RDI and restore it in a second-stage trampoline.
+ */
+ pushq %rdi
+ movq $entry_SYSCALL_64_stage2, %rdi
+ JMP_NOSPEC %rdi
+END(entry_SYSCALL_64_trampoline)
+
+ .popsection
+
+ENTRY(entry_SYSCALL_64_stage2)
+ UNWIND_HINT_EMPTY
+ popq %rdi
+ jmp entry_SYSCALL_64_after_hwframe
+END(entry_SYSCALL_64_stage2)
+
ENTRY(entry_SYSCALL_64)
UNWIND_HINT_EMPTY
/*
@@ -149,6 +212,10 @@ ENTRY(entry_SYSCALL_64)
*/
swapgs
+ /*
+ * This path is not taken when PAGE_TABLE_ISOLATION is disabled so it
+ * is not required to switch CR3.
+ */
movq %rsp, PER_CPU_VAR(rsp_scratch)
movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp
@@ -204,7 +271,12 @@ entry_SYSCALL_64_fastpath:
* It might end up jumping to the slow path. If it jumps, RAX
* and all argument registers are clobbered.
*/
+#ifdef CONFIG_RETPOLINE
+ movq sys_call_table(, %rax, 8), %rax
+ call __x86_indirect_thunk_rax
+#else
call *sys_call_table(, %rax, 8)
+#endif
.Lentry_SYSCALL_64_after_fastpath_call:
movq %rax, RAX(%rsp)
@@ -330,8 +402,25 @@ syscall_return_via_sysret:
popq %rsi /* skip rcx */
popq %rdx
popq %rsi
+
+ /*
+ * Now all regs are restored except RSP and RDI.
+ * Save old stack pointer and switch to trampoline stack.
+ */
+ movq %rsp, %rdi
+ movq PER_CPU_VAR(cpu_tss_rw + TSS_sp0), %rsp
+
+ pushq RSP-RDI(%rdi) /* RSP */
+ pushq (%rdi) /* RDI */
+
+ /*
+ * We are on the trampoline stack. All regs except RDI are live.
+ * We can do future final exit work right here.
+ */
+ SWITCH_TO_USER_CR3_STACK scratch_reg=%rdi
+
popq %rdi
- movq RSP-ORIG_RAX(%rsp), %rsp
+ popq %rsp
USERGS_SYSRET64
END(entry_SYSCALL_64)
@@ -359,7 +448,7 @@ ENTRY(stub_ptregs_64)
jmp entry_SYSCALL64_slow_path
1:
- jmp *%rax /* Called from C */
+ JMP_NOSPEC %rax /* Called from C */
END(stub_ptregs_64)
.macro ptregs_stub func
@@ -402,6 +491,18 @@ ENTRY(__switch_to_asm)
movq %rbx, PER_CPU_VAR(irq_stack_union)+stack_canary_offset
#endif
+#ifdef CONFIG_RETPOLINE
+ /*
+ * When switching from a shallower to a deeper call stack
+ * the RSB may either underflow or use entries populated
+ * with userspace addresses. On CPUs where those concerns
+ * exist, overwrite the RSB with entries which capture
+ * speculative execution to prevent attack.
+ */
+ /* Clobbers %rbx */
+ FILL_RETURN_BUFFER RSB_CLEAR_LOOPS, X86_FEATURE_RSB_CTXSW
+#endif
+
/* restore callee-saved registers */
popq %r15
popq %r14
@@ -438,7 +539,7 @@ ENTRY(ret_from_fork)
1:
/* kernel thread */
movq %r12, %rdi
- call *%rbx
+ CALL_NOSPEC %rbx
/*
* A kernel thread is allowed to return here after successfully
* calling do_execve(). Exit to userspace to complete the execve()
@@ -466,12 +567,13 @@ END(irq_entries_start)
.macro DEBUG_ENTRY_ASSERT_IRQS_OFF
#ifdef CONFIG_DEBUG_ENTRY
- pushfq
- testl $X86_EFLAGS_IF, (%rsp)
+ pushq %rax
+ SAVE_FLAGS(CLBR_RAX)
+ testl $X86_EFLAGS_IF, %eax
jz .Lokay_\@
ud2
.Lokay_\@:
- addq $8, %rsp
+ popq %rax
#endif
.endm
@@ -563,6 +665,13 @@ END(irq_entries_start)
/* 0(%rsp): ~(interrupt number) */
.macro interrupt func
cld
+
+ testb $3, CS-ORIG_RAX(%rsp)
+ jz 1f
+ SWAPGS
+ call switch_to_thread_stack
+1:
+
ALLOC_PT_GPREGS_ON_STACK
SAVE_C_REGS
SAVE_EXTRA_REGS
@@ -572,12 +681,8 @@ END(irq_entries_start)
jz 1f
/*
- * IRQ from user mode. Switch to kernel gsbase and inform context
- * tracking that we're in kernel mode.
- */
- SWAPGS
-
- /*
+ * IRQ from user mode.
+ *
* We need to tell lockdep that IRQs are off. We can't do this until
* we fix gsbase, and we should do it before enter_from_user_mode
* (which can take locks). Since TRACE_IRQS_OFF idempotent,
@@ -630,10 +735,43 @@ GLOBAL(swapgs_restore_regs_and_return_to_usermode)
ud2
1:
#endif
- SWAPGS
POP_EXTRA_REGS
- POP_C_REGS
- addq $8, %rsp /* skip regs->orig_ax */
+ popq %r11
+ popq %r10
+ popq %r9
+ popq %r8
+ popq %rax
+ popq %rcx
+ popq %rdx
+ popq %rsi
+
+ /*
+ * The stack is now user RDI, orig_ax, RIP, CS, EFLAGS, RSP, SS.
+ * Save old stack pointer and switch to trampoline stack.
+ */
+ movq %rsp, %rdi
+ movq PER_CPU_VAR(cpu_tss_rw + TSS_sp0), %rsp
+
+ /* Copy the IRET frame to the trampoline stack. */
+ pushq 6*8(%rdi) /* SS */
+ pushq 5*8(%rdi) /* RSP */
+ pushq 4*8(%rdi) /* EFLAGS */
+ pushq 3*8(%rdi) /* CS */
+ pushq 2*8(%rdi) /* RIP */
+
+ /* Push user RDI on the trampoline stack. */
+ pushq (%rdi)
+
+ /*
+ * We are on the trampoline stack. All regs except RDI are live.
+ * We can do future final exit work right here.
+ */
+
+ SWITCH_TO_USER_CR3_STACK scratch_reg=%rdi
+
+ /* Restore RDI. */
+ popq %rdi
+ SWAPGS
INTERRUPT_RETURN
@@ -713,7 +851,9 @@ native_irq_return_ldt:
*/
pushq %rdi /* Stash user RDI */
- SWAPGS
+ SWAPGS /* to kernel GS */
+ SWITCH_TO_KERNEL_CR3 scratch_reg=%rdi /* to kernel CR3 */
+
movq PER_CPU_VAR(espfix_waddr), %rdi
movq %rax, (0*8)(%rdi) /* user RAX */
movq (1*8)(%rsp), %rax /* user RIP */
@@ -729,7 +869,6 @@ native_irq_return_ldt:
/* Now RAX == RSP. */
andl $0xffff0000, %eax /* RAX = (RSP & 0xffff0000) */
- popq %rdi /* Restore user RDI */
/*
* espfix_stack[31:16] == 0. The page tables are set up such that
@@ -740,7 +879,11 @@ native_irq_return_ldt:
* still points to an RO alias of the ESPFIX stack.
*/
orq PER_CPU_VAR(espfix_stack), %rax
- SWAPGS
+
+ SWITCH_TO_USER_CR3_STACK scratch_reg=%rdi
+ SWAPGS /* to user GS */
+ popq %rdi /* Restore user RDI */
+
movq %rax, %rsp
UNWIND_HINT_IRET_REGS offset=8
@@ -829,7 +972,35 @@ apicinterrupt IRQ_WORK_VECTOR irq_work_interrupt smp_irq_work_interrupt
/*
* Exception entry points.
*/
-#define CPU_TSS_IST(x) PER_CPU_VAR(cpu_tss) + (TSS_ist + ((x) - 1) * 8)
+#define CPU_TSS_IST(x) PER_CPU_VAR(cpu_tss_rw) + (TSS_ist + ((x) - 1) * 8)
+
+/*
+ * Switch to the thread stack. This is called with the IRET frame and
+ * orig_ax on the stack. (That is, RDI..R12 are not on the stack and
+ * space has not been allocated for them.)
+ */
+ENTRY(switch_to_thread_stack)
+ UNWIND_HINT_FUNC
+
+ pushq %rdi
+ /* Need to switch before accessing the thread stack. */
+ SWITCH_TO_KERNEL_CR3 scratch_reg=%rdi
+ movq %rsp, %rdi
+ movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp
+ UNWIND_HINT sp_offset=16 sp_reg=ORC_REG_DI
+
+ pushq 7*8(%rdi) /* regs->ss */
+ pushq 6*8(%rdi) /* regs->rsp */
+ pushq 5*8(%rdi) /* regs->eflags */
+ pushq 4*8(%rdi) /* regs->cs */
+ pushq 3*8(%rdi) /* regs->ip */
+ pushq 2*8(%rdi) /* regs->orig_ax */
+ pushq 8(%rdi) /* return address */
+ UNWIND_HINT_FUNC
+
+ movq (%rdi), %rdi
+ ret
+END(switch_to_thread_stack)
.macro idtentry sym do_sym has_error_code:req paranoid=0 shift_ist=-1
ENTRY(\sym)
@@ -848,11 +1019,12 @@ ENTRY(\sym)
ALLOC_PT_GPREGS_ON_STACK
- .if \paranoid
- .if \paranoid == 1
+ .if \paranoid < 2
testb $3, CS(%rsp) /* If coming from userspace, switch stacks */
- jnz 1f
+ jnz .Lfrom_usermode_switch_stack_\@
.endif
+
+ .if \paranoid
call paranoid_entry
.else
call error_entry
@@ -894,20 +1066,15 @@ ENTRY(\sym)
jmp error_exit
.endif
- .if \paranoid == 1
+ .if \paranoid < 2
/*
- * Paranoid entry from userspace. Switch stacks and treat it
+ * Entry from userspace. Switch stacks and treat it
* as a normal entry. This means that paranoid handlers
* run in real process context if user_mode(regs).
*/
-1:
+.Lfrom_usermode_switch_stack_\@:
call error_entry
-
- movq %rsp, %rdi /* pt_regs pointer */
- call sync_regs
- movq %rax, %rsp /* switch stack */
-
movq %rsp, %rdi /* pt_regs pointer */
.if \has_error_code
@@ -1078,6 +1245,9 @@ apicinterrupt3 HYPERVISOR_CALLBACK_VECTOR \
#if IS_ENABLED(CONFIG_HYPERV)
apicinterrupt3 HYPERVISOR_CALLBACK_VECTOR \
hyperv_callback_vector hyperv_vector_handler
+
+apicinterrupt3 HYPERV_REENLIGHTENMENT_VECTOR \
+ hyperv_reenlightenment_vector hyperv_reenlightenment_intr
#endif /* CONFIG_HYPERV */
idtentry debug do_debug has_error_code=0 paranoid=1 shift_ist=DEBUG_STACK
@@ -1098,7 +1268,7 @@ idtentry async_page_fault do_async_page_fault has_error_code=1
#endif
#ifdef CONFIG_X86_MCE
-idtentry machine_check has_error_code=0 paranoid=1 do_sym=*machine_check_vector(%rip)
+idtentry machine_check do_mce has_error_code=0 paranoid=1
#endif
/*
@@ -1119,7 +1289,11 @@ ENTRY(paranoid_entry)
js 1f /* negative -> in kernel */
SWAPGS
xorl %ebx, %ebx
-1: ret
+
+1:
+ SAVE_AND_SWITCH_TO_KERNEL_CR3 scratch_reg=%rax save_reg=%r14
+
+ ret
END(paranoid_entry)
/*
@@ -1141,6 +1315,7 @@ ENTRY(paranoid_exit)
testl %ebx, %ebx /* swapgs needed? */
jnz .Lparanoid_exit_no_swapgs
TRACE_IRQS_IRETQ
+ RESTORE_CR3 scratch_reg=%rbx save_reg=%r14
SWAPGS_UNSAFE_STACK
jmp .Lparanoid_exit_restore
.Lparanoid_exit_no_swapgs:
@@ -1168,8 +1343,18 @@ ENTRY(error_entry)
* from user mode due to an IRET fault.
*/
SWAPGS
+ /* We have user CR3. Change to kernel CR3. */
+ SWITCH_TO_KERNEL_CR3 scratch_reg=%rax
.Lerror_entry_from_usermode_after_swapgs:
+ /* Put us onto the real thread stack. */
+ popq %r12 /* save return addr in %12 */
+ movq %rsp, %rdi /* arg0 = pt_regs pointer */
+ call sync_regs
+ movq %rax, %rsp /* switch stack */
+ ENCODE_FRAME_POINTER
+ pushq %r12
+
/*
* We need to tell lockdep that IRQs are off. We can't do this until
* we fix gsbase, and we should do it before enter_from_user_mode
@@ -1206,6 +1391,7 @@ ENTRY(error_entry)
* .Lgs_change's error handler with kernel gsbase.
*/
SWAPGS
+ SWITCH_TO_KERNEL_CR3 scratch_reg=%rax
jmp .Lerror_entry_done
.Lbstep_iret:
@@ -1215,10 +1401,11 @@ ENTRY(error_entry)
.Lerror_bad_iret:
/*
- * We came from an IRET to user mode, so we have user gsbase.
- * Switch to kernel gsbase:
+ * We came from an IRET to user mode, so we have user
+ * gsbase and CR3. Switch to kernel gsbase and CR3:
*/
SWAPGS
+ SWITCH_TO_KERNEL_CR3 scratch_reg=%rax
/*
* Pretend that the exception came from user mode: set up pt_regs
@@ -1250,6 +1437,10 @@ END(error_exit)
/*
* Runs on exception stack. Xen PV does not go through this path at all,
* so we can use real assembly here.
+ *
+ * Registers:
+ * %r14: Used to save/restore the CR3 of the interrupted context
+ * when PAGE_TABLE_ISOLATION is in use. Do not clobber.
*/
ENTRY(nmi)
UNWIND_HINT_IRET_REGS
@@ -1313,6 +1504,7 @@ ENTRY(nmi)
swapgs
cld
+ SWITCH_TO_KERNEL_CR3 scratch_reg=%rdx
movq %rsp, %rdx
movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp
UNWIND_HINT_IRET_REGS base=%rdx offset=8
@@ -1565,6 +1757,8 @@ end_repeat_nmi:
movq $-1, %rsi
call do_nmi
+ RESTORE_CR3 scratch_reg=%r15 save_reg=%r14
+
testl %ebx, %ebx /* swapgs needed? */
jnz nmi_restore
nmi_swapgs:
diff --git a/arch/x86/entry/entry_64_compat.S b/arch/x86/entry/entry_64_compat.S
index 568e130d932c..98d5358e4041 100644
--- a/arch/x86/entry/entry_64_compat.S
+++ b/arch/x86/entry/entry_64_compat.S
@@ -48,7 +48,11 @@
*/
ENTRY(entry_SYSENTER_compat)
/* Interrupts are off on entry. */
- SWAPGS_UNSAFE_STACK
+ SWAPGS
+
+ /* We are about to clobber %rsp anyway, clobbering here is OK */
+ SWITCH_TO_KERNEL_CR3 scratch_reg=%rsp
+
movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp
/*
@@ -186,8 +190,13 @@ ENTRY(entry_SYSCALL_compat)
/* Interrupts are off on entry. */
swapgs
- /* Stash user ESP and switch to the kernel stack. */
+ /* Stash user ESP */
movl %esp, %r8d
+
+ /* Use %rsp as scratch reg. User ESP is stashed in r8 */
+ SWITCH_TO_KERNEL_CR3 scratch_reg=%rsp
+
+ /* Switch to the kernel stack */
movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp
/* Construct struct pt_regs on stack */
@@ -256,10 +265,22 @@ sysret32_from_system_call:
* when the system call started, which is already known to user
* code. We zero R8-R10 to avoid info leaks.
*/
+ movq RSP-ORIG_RAX(%rsp), %rsp
+
+ /*
+ * The original userspace %rsp (RSP-ORIG_RAX(%rsp)) is stored
+ * on the process stack which is not mapped to userspace and
+ * not readable after we SWITCH_TO_USER_CR3. Delay the CR3
+ * switch until after after the last reference to the process
+ * stack.
+ *
+ * %r8/%r9 are zeroed before the sysret, thus safe to clobber.
+ */
+ SWITCH_TO_USER_CR3_NOSTACK scratch_reg=%r8 scratch_reg2=%r9
+
xorq %r8, %r8
xorq %r9, %r9
xorq %r10, %r10
- movq RSP-ORIG_RAX(%rsp), %rsp
swapgs
sysretl
END(entry_SYSCALL_compat)
@@ -306,8 +327,11 @@ ENTRY(entry_INT80_compat)
*/
movl %eax, %eax
- /* Construct struct pt_regs on stack (iret frame is already on stack) */
pushq %rax /* pt_regs->orig_ax */
+
+ /* switch to thread stack expects orig_ax to be pushed */
+ call switch_to_thread_stack
+
pushq %rdi /* pt_regs->di */
pushq %rsi /* pt_regs->si */
pushq %rdx /* pt_regs->dx */
diff --git a/arch/x86/entry/vsyscall/vsyscall_64.c b/arch/x86/entry/vsyscall/vsyscall_64.c
index f279ba2643dc..577fa8adb785 100644
--- a/arch/x86/entry/vsyscall/vsyscall_64.c
+++ b/arch/x86/entry/vsyscall/vsyscall_64.c
@@ -37,6 +37,7 @@
#include <asm/unistd.h>
#include <asm/fixmap.h>
#include <asm/traps.h>
+#include <asm/paravirt.h>
#define CREATE_TRACE_POINTS
#include "vsyscall_trace.h"
@@ -138,6 +139,10 @@ bool emulate_vsyscall(struct pt_regs *regs, unsigned long address)
WARN_ON_ONCE(address != regs->ip);
+ /* This should be unreachable in NATIVE mode. */
+ if (WARN_ON(vsyscall_mode == NATIVE))
+ return false;
+
if (vsyscall_mode == NONE) {
warn_bad_vsyscall(KERN_INFO, regs,
"vsyscall attempted with vsyscall=none");
@@ -329,16 +334,47 @@ int in_gate_area_no_mm(unsigned long addr)
return vsyscall_mode != NONE && (addr & PAGE_MASK) == VSYSCALL_ADDR;
}
+/*
+ * The VSYSCALL page is the only user-accessible page in the kernel address
+ * range. Normally, the kernel page tables can have _PAGE_USER clear, but
+ * the tables covering VSYSCALL_ADDR need _PAGE_USER set if vsyscalls
+ * are enabled.
+ *
+ * Some day we may create a "minimal" vsyscall mode in which we emulate
+ * vsyscalls but leave the page not present. If so, we skip calling
+ * this.
+ */
+void __init set_vsyscall_pgtable_user_bits(pgd_t *root)
+{
+ pgd_t *pgd;
+ p4d_t *p4d;
+ pud_t *pud;
+ pmd_t *pmd;
+
+ pgd = pgd_offset_pgd(root, VSYSCALL_ADDR);
+ set_pgd(pgd, __pgd(pgd_val(*pgd) | _PAGE_USER));
+ p4d = p4d_offset(pgd, VSYSCALL_ADDR);
+#if CONFIG_PGTABLE_LEVELS >= 5
+ p4d->p4d |= _PAGE_USER;
+#endif
+ pud = pud_offset(p4d, VSYSCALL_ADDR);
+ set_pud(pud, __pud(pud_val(*pud) | _PAGE_USER));
+ pmd = pmd_offset(pud, VSYSCALL_ADDR);
+ set_pmd(pmd, __pmd(pmd_val(*pmd) | _PAGE_USER));
+}
+
void __init map_vsyscall(void)
{
extern char __vsyscall_page;
unsigned long physaddr_vsyscall = __pa_symbol(&__vsyscall_page);
- if (vsyscall_mode != NONE)
+ if (vsyscall_mode != NONE) {
__set_fixmap(VSYSCALL_PAGE, physaddr_vsyscall,
vsyscall_mode == NATIVE
? PAGE_KERNEL_VSYSCALL
: PAGE_KERNEL_VVAR);
+ set_vsyscall_pgtable_user_bits(swapper_pg_dir);
+ }
BUILD_BUG_ON((unsigned long)__fix_to_virt(VSYSCALL_PAGE) !=
(unsigned long)VSYSCALL_ADDR);
generated by cgit (git 2.34.1) at 2024-06-09 15:48:55 +0000