diff options
Diffstat (limited to 'arch/x86/kernel/cpu/amd.c')
| -rw-r--r-- | arch/x86/kernel/cpu/amd.c | 269 |
1 files changed, 67 insertions, 202 deletions
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index f3abca334199..54194f5995de 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -13,6 +13,7 @@ #include <asm/apic.h> #include <asm/cacheinfo.h> #include <asm/cpu.h> +#include <asm/cpu_device_id.h> #include <asm/spec-ctrl.h> #include <asm/smp.h> #include <asm/numa.h> @@ -20,6 +21,7 @@ #include <asm/delay.h> #include <asm/debugreg.h> #include <asm/resctrl.h> +#include <asm/sev.h> #ifdef CONFIG_X86_64 # include <asm/mmconfig.h> @@ -27,13 +29,6 @@ #include "cpu.h" -/* - * nodes_per_socket: Stores the number of nodes per socket. - * Refer to Fam15h Models 00-0fh BKDG - CPUID Fn8000_001E_ECX - * Node Identifiers[10:8] - */ -static u32 nodes_per_socket = 1; - static inline int rdmsrl_amd_safe(unsigned msr, unsigned long long *p) { u32 gprs[8] = { 0 }; @@ -300,97 +295,6 @@ static int nearby_node(int apicid) } #endif -/* - * Fix up topo::core_id for pre-F17h systems to be in the - * [0 .. cores_per_node - 1] range. Not really needed but - * kept so as not to break existing setups. - */ -static void legacy_fixup_core_id(struct cpuinfo_x86 *c) -{ - u32 cus_per_node; - - if (c->x86 >= 0x17) - return; - - cus_per_node = c->x86_max_cores / nodes_per_socket; - c->topo.core_id %= cus_per_node; -} - -/* - * Fixup core topology information for - * (1) AMD multi-node processors - * Assumption: Number of cores in each internal node is the same. - * (2) AMD processors supporting compute units - */ -static void amd_get_topology(struct cpuinfo_x86 *c) -{ - /* get information required for multi-node processors */ - if (boot_cpu_has(X86_FEATURE_TOPOEXT)) { - int err; - u32 eax, ebx, ecx, edx; - - cpuid(0x8000001e, &eax, &ebx, &ecx, &edx); - - c->topo.die_id = ecx & 0xff; - - if (c->x86 == 0x15) - c->topo.cu_id = ebx & 0xff; - - if (c->x86 >= 0x17) { - c->topo.core_id = ebx & 0xff; - - if (smp_num_siblings > 1) - c->x86_max_cores /= smp_num_siblings; - } - - /* - * In case leaf B is available, use it to derive - * topology information. - */ - err = detect_extended_topology(c); - if (!err) - c->x86_coreid_bits = get_count_order(c->x86_max_cores); - - cacheinfo_amd_init_llc_id(c); - - } else if (cpu_has(c, X86_FEATURE_NODEID_MSR)) { - u64 value; - - rdmsrl(MSR_FAM10H_NODE_ID, value); - c->topo.die_id = value & 7; - c->topo.llc_id = c->topo.die_id; - } else - return; - - if (nodes_per_socket > 1) { - set_cpu_cap(c, X86_FEATURE_AMD_DCM); - legacy_fixup_core_id(c); - } -} - -/* - * On a AMD dual core setup the lower bits of the APIC id distinguish the cores. - * Assumes number of cores is a power of two. - */ -static void amd_detect_cmp(struct cpuinfo_x86 *c) -{ - unsigned bits; - - bits = c->x86_coreid_bits; - /* Low order bits define the core id (index of core in socket) */ - c->topo.core_id = c->topo.initial_apicid & ((1 << bits)-1); - /* Convert the initial APIC ID into the socket ID */ - c->topo.pkg_id = c->topo.initial_apicid >> bits; - /* use socket ID also for last level cache */ - c->topo.llc_id = c->topo.die_id = c->topo.pkg_id; -} - -u32 amd_get_nodes_per_socket(void) -{ - return nodes_per_socket; -} -EXPORT_SYMBOL_GPL(amd_get_nodes_per_socket); - static void srat_detect_node(struct cpuinfo_x86 *c) { #ifdef CONFIG_NUMA @@ -442,29 +346,30 @@ static void srat_detect_node(struct cpuinfo_x86 *c) #endif } -static void early_init_amd_mc(struct cpuinfo_x86 *c) +static void bsp_determine_snp(struct cpuinfo_x86 *c) { -#ifdef CONFIG_SMP - unsigned bits, ecx; - - /* Multi core CPU? */ - if (c->extended_cpuid_level < 0x80000008) - return; - - ecx = cpuid_ecx(0x80000008); - - c->x86_max_cores = (ecx & 0xff) + 1; - - /* CPU telling us the core id bits shift? */ - bits = (ecx >> 12) & 0xF; +#ifdef CONFIG_ARCH_HAS_CC_PLATFORM + cc_vendor = CC_VENDOR_AMD; - /* Otherwise recompute */ - if (bits == 0) { - while ((1 << bits) < c->x86_max_cores) - bits++; + if (cpu_has(c, X86_FEATURE_SEV_SNP)) { + /* + * RMP table entry format is not architectural and is defined by the + * per-processor PPR. Restrict SNP support on the known CPU models + * for which the RMP table entry format is currently defined or for + * processors which support the architecturally defined RMPREAD + * instruction. + */ + if (!cpu_has(c, X86_FEATURE_HYPERVISOR) && + (cpu_feature_enabled(X86_FEATURE_ZEN3) || + cpu_feature_enabled(X86_FEATURE_ZEN4) || + cpu_feature_enabled(X86_FEATURE_RMPREAD)) && + snp_probe_rmptable_info()) { + cc_platform_set(CC_ATTR_HOST_SEV_SNP); + } else { + setup_clear_cpu_cap(X86_FEATURE_SEV_SNP); + cc_platform_clear(CC_ATTR_HOST_SEV_SNP); + } } - - c->x86_coreid_bits = bits; #endif } @@ -500,18 +405,6 @@ static void bsp_init_amd(struct cpuinfo_x86 *c) if (cpu_has(c, X86_FEATURE_MWAITX)) use_mwaitx_delay(); - if (boot_cpu_has(X86_FEATURE_TOPOEXT)) { - u32 ecx; - - ecx = cpuid_ecx(0x8000001e); - __max_die_per_package = nodes_per_socket = ((ecx >> 8) & 7) + 1; - } else if (boot_cpu_has(X86_FEATURE_NODEID_MSR)) { - u64 value; - - rdmsrl(MSR_FAM10H_NODE_ID, value); - __max_die_per_package = nodes_per_socket = ((value >> 3) & 7) + 1; - } - if (!boot_cpu_has(X86_FEATURE_AMD_SSBD) && !boot_cpu_has(X86_FEATURE_VIRT_SSBD) && c->x86 >= 0x15 && c->x86 <= 0x17) { @@ -572,10 +465,9 @@ static void bsp_init_amd(struct cpuinfo_x86 *c) case 0x1a: switch (c->x86_model) { - case 0x00 ... 0x0f: - case 0x20 ... 0x2f: + case 0x00 ... 0x2f: case 0x40 ... 0x4f: - case 0x70 ... 0x7f: + case 0x60 ... 0x7f: setup_force_cpu_cap(X86_FEATURE_ZEN5); break; default: @@ -587,6 +479,7 @@ static void bsp_init_amd(struct cpuinfo_x86 *c) break; } + bsp_determine_snp(c); return; warn: @@ -605,8 +498,8 @@ static void early_detect_mem_encrypt(struct cpuinfo_x86 *c) * SME feature (set in scattered.c). * If the kernel has not enabled SME via any means then * don't advertise the SME feature. - * For SEV: If BIOS has not enabled SEV then don't advertise the - * SEV and SEV_ES feature (set in scattered.c). + * For SEV: If BIOS has not enabled SEV then don't advertise SEV and + * any additional functionality based on it. * * In all cases, since support for SME and SEV requires long mode, * don't advertise the feature under CONFIG_X86_32. @@ -641,16 +534,14 @@ clear_all: clear_sev: setup_clear_cpu_cap(X86_FEATURE_SEV); setup_clear_cpu_cap(X86_FEATURE_SEV_ES); + setup_clear_cpu_cap(X86_FEATURE_SEV_SNP); } } static void early_init_amd(struct cpuinfo_x86 *c) { - u64 value; u32 dummy; - early_init_amd_mc(c); - if (c->x86 >= 0xf) set_cpu_cap(c, X86_FEATURE_K8); @@ -716,23 +607,6 @@ static void early_init_amd(struct cpuinfo_x86 *c) early_detect_mem_encrypt(c); - /* Re-enable TopologyExtensions if switched off by BIOS */ - if (c->x86 == 0x15 && - (c->x86_model >= 0x10 && c->x86_model <= 0x6f) && - !cpu_has(c, X86_FEATURE_TOPOEXT)) { - - if (msr_set_bit(0xc0011005, 54) > 0) { - rdmsrl(0xc0011005, value); - if (value & BIT_64(54)) { - set_cpu_cap(c, X86_FEATURE_TOPOEXT); - pr_info_once(FW_INFO "CPU: Re-enabling disabled Topology Extensions Support.\n"); - } - } - } - - if (cpu_has(c, X86_FEATURE_TOPOEXT)) - smp_num_siblings = ((cpuid_ebx(0x8000001e) >> 8) & 0xff) + 1; - if (!cpu_has(c, X86_FEATURE_HYPERVISOR) && !cpu_has(c, X86_FEATURE_IBPB_BRTYPE)) { if (c->x86 == 0x17 && boot_cpu_has(X86_FEATURE_AMD_IBPB)) setup_force_cpu_cap(X86_FEATURE_IBPB_BRTYPE); @@ -926,6 +800,11 @@ static void init_amd_bd(struct cpuinfo_x86 *c) clear_rdrand_cpuid_bit(c); } +static const struct x86_cpu_id erratum_1386_microcode[] = { + X86_MATCH_VFM_STEPS(VFM_MAKE(X86_VENDOR_AMD, 0x17, 0x01), 0x2, 0x2, 0x0800126e), + X86_MATCH_VFM_STEPS(VFM_MAKE(X86_VENDOR_AMD, 0x17, 0x31), 0x0, 0x0, 0x08301052), +}; + static void fix_erratum_1386(struct cpuinfo_x86 *c) { /* @@ -935,13 +814,19 @@ static void fix_erratum_1386(struct cpuinfo_x86 *c) * * Affected parts all have no supervisor XSAVE states, meaning that * the XSAVEC instruction (which works fine) is equivalent. + * + * Clear the feature flag only on microcode revisions which + * don't have the fix. */ + if (x86_match_min_microcode_rev(erratum_1386_microcode)) + return; + clear_cpu_cap(c, X86_FEATURE_XSAVES); } void init_spectral_chicken(struct cpuinfo_x86 *c) { -#ifdef CONFIG_CPU_UNRET_ENTRY +#ifdef CONFIG_MITIGATION_UNRET_ENTRY u64 value; /* @@ -969,7 +854,6 @@ static void init_amd_zen_common(void) static void init_amd_zen1(struct cpuinfo_x86 *c) { - init_amd_zen_common(); fix_erratum_1386(c); /* Fix up CPUID bits, but only if not virtualised. */ @@ -989,11 +873,11 @@ static bool cpu_has_zenbleed_microcode(void) u32 good_rev = 0; switch (boot_cpu_data.x86_model) { - case 0x30 ... 0x3f: good_rev = 0x0830107a; break; - case 0x60 ... 0x67: good_rev = 0x0860010b; break; - case 0x68 ... 0x6f: good_rev = 0x08608105; break; - case 0x70 ... 0x7f: good_rev = 0x08701032; break; - case 0xa0 ... 0xaf: good_rev = 0x08a00008; break; + case 0x30 ... 0x3f: good_rev = 0x0830107b; break; + case 0x60 ... 0x67: good_rev = 0x0860010c; break; + case 0x68 ... 0x6f: good_rev = 0x08608107; break; + case 0x70 ... 0x7f: good_rev = 0x08701033; break; + case 0xa0 ... 0xaf: good_rev = 0x08a00009; break; default: return false; @@ -1023,7 +907,6 @@ static void zen2_zenbleed_check(struct cpuinfo_x86 *c) static void init_amd_zen2(struct cpuinfo_x86 *c) { - init_amd_zen_common(); init_spectral_chicken(c); fix_erratum_1386(c); zen2_zenbleed_check(c); @@ -1031,8 +914,6 @@ static void init_amd_zen2(struct cpuinfo_x86 *c) static void init_amd_zen3(struct cpuinfo_x86 *c) { - init_amd_zen_common(); - if (!cpu_has(c, X86_FEATURE_HYPERVISOR)) { /* * Zen3 (Fam19 model < 0x10) parts are not susceptible to @@ -1046,15 +927,23 @@ static void init_amd_zen3(struct cpuinfo_x86 *c) static void init_amd_zen4(struct cpuinfo_x86 *c) { - init_amd_zen_common(); - if (!cpu_has(c, X86_FEATURE_HYPERVISOR)) msr_set_bit(MSR_ZEN4_BP_CFG, MSR_ZEN4_BP_CFG_SHARED_BTB_FIX_BIT); + + /* + * These Zen4 SoCs advertise support for virtualized VMLOAD/VMSAVE + * in some BIOS versions but they can lead to random host reboots. + */ + switch (c->x86_model) { + case 0x18 ... 0x1f: + case 0x60 ... 0x7f: + clear_cpu_cap(c, X86_FEATURE_V_VMSAVE_VMLOAD); + break; + } } static void init_amd_zen5(struct cpuinfo_x86 *c) { - init_amd_zen_common(); } static void init_amd(struct cpuinfo_x86 *c) @@ -1076,9 +965,6 @@ static void init_amd(struct cpuinfo_x86 *c) if (cpu_has(c, X86_FEATURE_FSRM)) set_cpu_cap(c, X86_FEATURE_FSRS); - /* get apicid instead of initial apic id from cpuid */ - c->topo.apicid = read_apic_id(); - /* K6s reports MCEs but don't actually have all the MSRs */ if (c->x86 < 6) clear_cpu_cap(c, X86_FEATURE_MCE); @@ -1094,6 +980,13 @@ static void init_amd(struct cpuinfo_x86 *c) case 0x16: init_amd_jg(c); break; } + /* + * Save up on some future enablement work and do common Zen + * settings. + */ + if (c->x86 >= 0x17) + init_amd_zen_common(); + if (boot_cpu_has(X86_FEATURE_ZEN1)) init_amd_zen1(c); else if (boot_cpu_has(X86_FEATURE_ZEN2)) @@ -1114,8 +1007,6 @@ static void init_amd(struct cpuinfo_x86 *c) cpu_detect_cache_sizes(c); - amd_detect_cmp(c); - amd_get_topology(c); srat_detect_node(c); init_amd_cacheinfo(c); @@ -1178,7 +1069,7 @@ static void init_amd(struct cpuinfo_x86 *c) */ if (spectre_v2_in_eibrs_mode(spectre_v2_enabled) && cpu_has(c, X86_FEATURE_AUTOIBRS)) - WARN_ON_ONCE(msr_set_bit(MSR_EFER, _EFER_AUTOIBRS)); + WARN_ON_ONCE(msr_set_bit(MSR_EFER, _EFER_AUTOIBRS) < 0); /* AMD CPUs don't need fencing after x2APIC/TSC_DEADLINE MSR writes. */ clear_cpu_cap(c, X86_FEATURE_APIC_MSRS_FENCE); @@ -1315,22 +1206,6 @@ unsigned long amd_get_dr_addr_mask(unsigned int dr) } EXPORT_SYMBOL_GPL(amd_get_dr_addr_mask); -u32 amd_get_highest_perf(void) -{ - struct cpuinfo_x86 *c = &boot_cpu_data; - - if (c->x86 == 0x17 && ((c->x86_model >= 0x30 && c->x86_model < 0x40) || - (c->x86_model >= 0x70 && c->x86_model < 0x80))) - return 166; - - if (c->x86 == 0x19 && ((c->x86_model >= 0x20 && c->x86_model < 0x30) || - (c->x86_model >= 0x40 && c->x86_model < 0x70))) - return 166; - - return 255; -} -EXPORT_SYMBOL_GPL(amd_get_highest_perf); - static void zenbleed_check_cpu(void *unused) { struct cpuinfo_x86 *c = &cpu_data(smp_processor_id()); @@ -1343,16 +1218,6 @@ void amd_check_microcode(void) if (boot_cpu_data.x86_vendor != X86_VENDOR_AMD) return; - on_each_cpu(zenbleed_check_cpu, NULL, 1); -} - -/* - * Issue a DIV 0/1 insn to clear any division data from previous DIV - * operations. - */ -void noinstr amd_clear_divider(void) -{ - asm volatile(ALTERNATIVE("", "div %2\n\t", X86_BUG_DIV0) - :: "a" (0), "d" (0), "r" (1)); + if (cpu_feature_enabled(X86_FEATURE_ZEN2)) + on_each_cpu(zenbleed_check_cpu, NULL, 1); } -EXPORT_SYMBOL_GPL(amd_clear_divider); |