summaryrefslogtreecommitdiff
path: root/arch/x86/mm/mem_encrypt.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86/mm/mem_encrypt.c')
-rw-r--r--arch/x86/mm/mem_encrypt.c305
1 files changed, 292 insertions, 13 deletions
diff --git a/arch/x86/mm/mem_encrypt.c b/arch/x86/mm/mem_encrypt.c
index 3fcc8e01683b..d9a9e9fc75dd 100644
--- a/arch/x86/mm/mem_encrypt.c
+++ b/arch/x86/mm/mem_encrypt.c
@@ -10,6 +10,8 @@
* published by the Free Software Foundation.
*/
+#define DISABLE_BRANCH_PROFILING
+
#include <linux/linkage.h>
#include <linux/init.h>
#include <linux/mm.h>
@@ -28,6 +30,8 @@
#include <asm/msr.h>
#include <asm/cmdline.h>
+#include "mm_internal.h"
+
static char sme_cmdline_arg[] __initdata = "mem_encrypt";
static char sme_cmdline_on[] __initdata = "on";
static char sme_cmdline_off[] __initdata = "off";
@@ -38,7 +42,11 @@ static char sme_cmdline_off[] __initdata = "off";
* section is later cleared.
*/
u64 sme_me_mask __section(.data) = 0;
-EXPORT_SYMBOL_GPL(sme_me_mask);
+EXPORT_SYMBOL(sme_me_mask);
+DEFINE_STATIC_KEY_FALSE(sev_enable_key);
+EXPORT_SYMBOL_GPL(sev_enable_key);
+
+static bool sev_enabled __section(.data);
/* Buffer used for early in-place encryption by BSP, no locking needed */
static char sme_early_buffer[PAGE_SIZE] __aligned(PAGE_SIZE);
@@ -61,7 +69,6 @@ static void __init __sme_early_enc_dec(resource_size_t paddr,
if (!sme_me_mask)
return;
- local_flush_tlb();
wbinvd();
/*
@@ -188,8 +195,238 @@ void __init sme_early_init(void)
/* Update the protection map with memory encryption mask */
for (i = 0; i < ARRAY_SIZE(protection_map); i++)
protection_map[i] = pgprot_encrypted(protection_map[i]);
+
+ if (sev_active())
+ swiotlb_force = SWIOTLB_FORCE;
+}
+
+static void *sev_alloc(struct device *dev, size_t size, dma_addr_t *dma_handle,
+ gfp_t gfp, unsigned long attrs)
+{
+ unsigned long dma_mask;
+ unsigned int order;
+ struct page *page;
+ void *vaddr = NULL;
+
+ dma_mask = dma_alloc_coherent_mask(dev, gfp);
+ order = get_order(size);
+
+ /*
+ * Memory will be memset to zero after marking decrypted, so don't
+ * bother clearing it before.
+ */
+ gfp &= ~__GFP_ZERO;
+
+ page = alloc_pages_node(dev_to_node(dev), gfp, order);
+ if (page) {
+ dma_addr_t addr;
+
+ /*
+ * Since we will be clearing the encryption bit, check the
+ * mask with it already cleared.
+ */
+ addr = __sme_clr(phys_to_dma(dev, page_to_phys(page)));
+ if ((addr + size) > dma_mask) {
+ __free_pages(page, get_order(size));
+ } else {
+ vaddr = page_address(page);
+ *dma_handle = addr;
+ }
+ }
+
+ if (!vaddr)
+ vaddr = swiotlb_alloc_coherent(dev, size, dma_handle, gfp);
+
+ if (!vaddr)
+ return NULL;
+
+ /* Clear the SME encryption bit for DMA use if not swiotlb area */
+ if (!is_swiotlb_buffer(dma_to_phys(dev, *dma_handle))) {
+ set_memory_decrypted((unsigned long)vaddr, 1 << order);
+ memset(vaddr, 0, PAGE_SIZE << order);
+ *dma_handle = __sme_clr(*dma_handle);
+ }
+
+ return vaddr;
+}
+
+static void sev_free(struct device *dev, size_t size, void *vaddr,
+ dma_addr_t dma_handle, unsigned long attrs)
+{
+ /* Set the SME encryption bit for re-use if not swiotlb area */
+ if (!is_swiotlb_buffer(dma_to_phys(dev, dma_handle)))
+ set_memory_encrypted((unsigned long)vaddr,
+ 1 << get_order(size));
+
+ swiotlb_free_coherent(dev, size, vaddr, dma_handle);
+}
+
+static void __init __set_clr_pte_enc(pte_t *kpte, int level, bool enc)
+{
+ pgprot_t old_prot, new_prot;
+ unsigned long pfn, pa, size;
+ pte_t new_pte;
+
+ switch (level) {
+ case PG_LEVEL_4K:
+ pfn = pte_pfn(*kpte);
+ old_prot = pte_pgprot(*kpte);
+ break;
+ case PG_LEVEL_2M:
+ pfn = pmd_pfn(*(pmd_t *)kpte);
+ old_prot = pmd_pgprot(*(pmd_t *)kpte);
+ break;
+ case PG_LEVEL_1G:
+ pfn = pud_pfn(*(pud_t *)kpte);
+ old_prot = pud_pgprot(*(pud_t *)kpte);
+ break;
+ default:
+ return;
+ }
+
+ new_prot = old_prot;
+ if (enc)
+ pgprot_val(new_prot) |= _PAGE_ENC;
+ else
+ pgprot_val(new_prot) &= ~_PAGE_ENC;
+
+ /* If prot is same then do nothing. */
+ if (pgprot_val(old_prot) == pgprot_val(new_prot))
+ return;
+
+ pa = pfn << page_level_shift(level);
+ size = page_level_size(level);
+
+ /*
+ * We are going to perform in-place en-/decryption and change the
+ * physical page attribute from C=1 to C=0 or vice versa. Flush the
+ * caches to ensure that data gets accessed with the correct C-bit.
+ */
+ clflush_cache_range(__va(pa), size);
+
+ /* Encrypt/decrypt the contents in-place */
+ if (enc)
+ sme_early_encrypt(pa, size);
+ else
+ sme_early_decrypt(pa, size);
+
+ /* Change the page encryption mask. */
+ new_pte = pfn_pte(pfn, new_prot);
+ set_pte_atomic(kpte, new_pte);
+}
+
+static int __init early_set_memory_enc_dec(unsigned long vaddr,
+ unsigned long size, bool enc)
+{
+ unsigned long vaddr_end, vaddr_next;
+ unsigned long psize, pmask;
+ int split_page_size_mask;
+ int level, ret;
+ pte_t *kpte;
+
+ vaddr_next = vaddr;
+ vaddr_end = vaddr + size;
+
+ for (; vaddr < vaddr_end; vaddr = vaddr_next) {
+ kpte = lookup_address(vaddr, &level);
+ if (!kpte || pte_none(*kpte)) {
+ ret = 1;
+ goto out;
+ }
+
+ if (level == PG_LEVEL_4K) {
+ __set_clr_pte_enc(kpte, level, enc);
+ vaddr_next = (vaddr & PAGE_MASK) + PAGE_SIZE;
+ continue;
+ }
+
+ psize = page_level_size(level);
+ pmask = page_level_mask(level);
+
+ /*
+ * Check whether we can change the large page in one go.
+ * We request a split when the address is not aligned and
+ * the number of pages to set/clear encryption bit is smaller
+ * than the number of pages in the large page.
+ */
+ if (vaddr == (vaddr & pmask) &&
+ ((vaddr_end - vaddr) >= psize)) {
+ __set_clr_pte_enc(kpte, level, enc);
+ vaddr_next = (vaddr & pmask) + psize;
+ continue;
+ }
+
+ /*
+ * The virtual address is part of a larger page, create the next
+ * level page table mapping (4K or 2M). If it is part of a 2M
+ * page then we request a split of the large page into 4K
+ * chunks. A 1GB large page is split into 2M pages, resp.
+ */
+ if (level == PG_LEVEL_2M)
+ split_page_size_mask = 0;
+ else
+ split_page_size_mask = 1 << PG_LEVEL_2M;
+
+ kernel_physical_mapping_init(__pa(vaddr & pmask),
+ __pa((vaddr_end & pmask) + psize),
+ split_page_size_mask);
+ }
+
+ ret = 0;
+
+out:
+ __flush_tlb_all();
+ return ret;
+}
+
+int __init early_set_memory_decrypted(unsigned long vaddr, unsigned long size)
+{
+ return early_set_memory_enc_dec(vaddr, size, false);
+}
+
+int __init early_set_memory_encrypted(unsigned long vaddr, unsigned long size)
+{
+ return early_set_memory_enc_dec(vaddr, size, true);
}
+/*
+ * SME and SEV are very similar but they are not the same, so there are
+ * times that the kernel will need to distinguish between SME and SEV. The
+ * sme_active() and sev_active() functions are used for this. When a
+ * distinction isn't needed, the mem_encrypt_active() function can be used.
+ *
+ * The trampoline code is a good example for this requirement. Before
+ * paging is activated, SME will access all memory as decrypted, but SEV
+ * will access all memory as encrypted. So, when APs are being brought
+ * up under SME the trampoline area cannot be encrypted, whereas under SEV
+ * the trampoline area must be encrypted.
+ */
+bool sme_active(void)
+{
+ return sme_me_mask && !sev_enabled;
+}
+EXPORT_SYMBOL_GPL(sme_active);
+
+bool sev_active(void)
+{
+ return sme_me_mask && sev_enabled;
+}
+EXPORT_SYMBOL_GPL(sev_active);
+
+static const struct dma_map_ops sev_dma_ops = {
+ .alloc = sev_alloc,
+ .free = sev_free,
+ .map_page = swiotlb_map_page,
+ .unmap_page = swiotlb_unmap_page,
+ .map_sg = swiotlb_map_sg_attrs,
+ .unmap_sg = swiotlb_unmap_sg_attrs,
+ .sync_single_for_cpu = swiotlb_sync_single_for_cpu,
+ .sync_single_for_device = swiotlb_sync_single_for_device,
+ .sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
+ .sync_sg_for_device = swiotlb_sync_sg_for_device,
+ .mapping_error = swiotlb_dma_mapping_error,
+};
+
/* Architecture __weak replacement functions */
void __init mem_encrypt_init(void)
{
@@ -199,7 +436,23 @@ void __init mem_encrypt_init(void)
/* Call into SWIOTLB to update the SWIOTLB DMA buffers */
swiotlb_update_mem_attributes();
- pr_info("AMD Secure Memory Encryption (SME) active\n");
+ /*
+ * With SEV, DMA operations cannot use encryption. New DMA ops
+ * are required in order to mark the DMA areas as decrypted or
+ * to use bounce buffers.
+ */
+ if (sev_active())
+ dma_ops = &sev_dma_ops;
+
+ /*
+ * With SEV, we need to unroll the rep string I/O instructions.
+ */
+ if (sev_active())
+ static_branch_enable(&sev_enable_key);
+
+ pr_info("AMD %s active\n",
+ sev_active() ? "Secure Encrypted Virtualization (SEV)"
+ : "Secure Memory Encryption (SME)");
}
void swiotlb_set_mem_attributes(void *vaddr, unsigned long size)
@@ -527,37 +780,63 @@ void __init __nostackprotector sme_enable(struct boot_params *bp)
{
const char *cmdline_ptr, *cmdline_arg, *cmdline_on, *cmdline_off;
unsigned int eax, ebx, ecx, edx;
+ unsigned long feature_mask;
bool active_by_default;
unsigned long me_mask;
char buffer[16];
u64 msr;
- /* Check for the SME support leaf */
+ /* Check for the SME/SEV support leaf */
eax = 0x80000000;
ecx = 0;
native_cpuid(&eax, &ebx, &ecx, &edx);
if (eax < 0x8000001f)
return;
+#define AMD_SME_BIT BIT(0)
+#define AMD_SEV_BIT BIT(1)
/*
- * Check for the SME feature:
- * CPUID Fn8000_001F[EAX] - Bit 0
- * Secure Memory Encryption support
- * CPUID Fn8000_001F[EBX] - Bits 5:0
- * Pagetable bit position used to indicate encryption
+ * Set the feature mask (SME or SEV) based on whether we are
+ * running under a hypervisor.
+ */
+ eax = 1;
+ ecx = 0;
+ native_cpuid(&eax, &ebx, &ecx, &edx);
+ feature_mask = (ecx & BIT(31)) ? AMD_SEV_BIT : AMD_SME_BIT;
+
+ /*
+ * Check for the SME/SEV feature:
+ * CPUID Fn8000_001F[EAX]
+ * - Bit 0 - Secure Memory Encryption support
+ * - Bit 1 - Secure Encrypted Virtualization support
+ * CPUID Fn8000_001F[EBX]
+ * - Bits 5:0 - Pagetable bit position used to indicate encryption
*/
eax = 0x8000001f;
ecx = 0;
native_cpuid(&eax, &ebx, &ecx, &edx);
- if (!(eax & 1))
+ if (!(eax & feature_mask))
return;
me_mask = 1UL << (ebx & 0x3f);
- /* Check if SME is enabled */
- msr = __rdmsr(MSR_K8_SYSCFG);
- if (!(msr & MSR_K8_SYSCFG_MEM_ENCRYPT))
+ /* Check if memory encryption is enabled */
+ if (feature_mask == AMD_SME_BIT) {
+ /* For SME, check the SYSCFG MSR */
+ msr = __rdmsr(MSR_K8_SYSCFG);
+ if (!(msr & MSR_K8_SYSCFG_MEM_ENCRYPT))
+ return;
+ } else {
+ /* For SEV, check the SEV MSR */
+ msr = __rdmsr(MSR_AMD64_SEV);
+ if (!(msr & MSR_AMD64_SEV_ENABLED))
+ return;
+
+ /* SEV state cannot be controlled by a command line option */
+ sme_me_mask = me_mask;
+ sev_enabled = true;
return;
+ }
/*
* Fixups have not been applied to phys_base yet and we're running