diff options
Diffstat (limited to 'arch/x86')
33 files changed, 484 insertions, 726 deletions
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index e8ebafabd099..ee272423ec20 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -275,7 +275,9 @@ config X86 select HAVE_UNSTABLE_SCHED_CLOCK select HAVE_USER_RETURN_NOTIFIER select HAVE_GENERIC_VDSO + select HOTPLUG_PARALLEL if SMP && X86_64 select HOTPLUG_SMT if SMP + select HOTPLUG_SPLIT_STARTUP if SMP && X86_32 select IRQ_FORCED_THREADING select NEED_PER_CPU_EMBED_FIRST_CHUNK select NEED_PER_CPU_PAGE_FIRST_CHUNK @@ -2306,49 +2308,6 @@ config HOTPLUG_CPU def_bool y depends on SMP -config BOOTPARAM_HOTPLUG_CPU0 - bool "Set default setting of cpu0_hotpluggable" - depends on HOTPLUG_CPU - help - Set whether default state of cpu0_hotpluggable is on or off. - - Say Y here to enable CPU0 hotplug by default. If this switch - is turned on, there is no need to give cpu0_hotplug kernel - parameter and the CPU0 hotplug feature is enabled by default. - - Please note: there are two known CPU0 dependencies if you want - to enable the CPU0 hotplug feature either by this switch or by - cpu0_hotplug kernel parameter. - - First, resume from hibernate or suspend always starts from CPU0. - So hibernate and suspend are prevented if CPU0 is offline. - - Second dependency is PIC interrupts always go to CPU0. CPU0 can not - offline if any interrupt can not migrate out of CPU0. There may - be other CPU0 dependencies. - - Please make sure the dependencies are under your control before - you enable this feature. - - Say N if you don't want to enable CPU0 hotplug feature by default. - You still can enable the CPU0 hotplug feature at boot by kernel - parameter cpu0_hotplug. - -config DEBUG_HOTPLUG_CPU0 - def_bool n - prompt "Debug CPU0 hotplug" - depends on HOTPLUG_CPU - help - Enabling this option offlines CPU0 (if CPU0 can be offlined) as - soon as possible and boots up userspace with CPU0 offlined. User - can online CPU0 back after boot time. - - To debug CPU0 hotplug, you need to enable CPU0 offline/online - feature by either turning on CONFIG_BOOTPARAM_HOTPLUG_CPU0 during - compilation or giving cpu0_hotplug kernel parameter at boot. - - If unsure, say N. - config COMPAT_VDSO def_bool n prompt "Disable the 32-bit vDSO (needed for glibc 2.3.3)" diff --git a/arch/x86/coco/tdx/tdx.c b/arch/x86/coco/tdx/tdx.c index e146b599260f..27ce10c9ff61 100644 --- a/arch/x86/coco/tdx/tdx.c +++ b/arch/x86/coco/tdx/tdx.c @@ -871,5 +871,16 @@ void __init tdx_early_init(void) x86_platform.guest.enc_tlb_flush_required = tdx_tlb_flush_required; x86_platform.guest.enc_status_change_finish = tdx_enc_status_changed; + /* + * TDX intercepts the RDMSR to read the X2APIC ID in the parallel + * bringup low level code. That raises #VE which cannot be handled + * there. + * + * Intel-TDX has a secure RDMSR hypercall, but that needs to be + * implemented seperately in the low level startup ASM code. + * Until that is in place, disable parallel bringup for TDX. + */ + x86_cpuinit.parallel_bringup = false; + pr_info("Guest detected\n"); } diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h index 3216da7074ba..98c32aa5963a 100644 --- a/arch/x86/include/asm/apic.h +++ b/arch/x86/include/asm/apic.h @@ -55,6 +55,8 @@ extern int local_apic_timer_c2_ok; extern int disable_apic; extern unsigned int lapic_timer_period; +extern int cpuid_to_apicid[]; + extern enum apic_intr_mode_id apic_intr_mode; enum apic_intr_mode_id { APIC_PIC, @@ -377,7 +379,6 @@ extern struct apic *__apicdrivers[], *__apicdrivers_end[]; * APIC functionality to boot other CPUs - only used on SMP: */ #ifdef CONFIG_SMP -extern int wakeup_secondary_cpu_via_nmi(int apicid, unsigned long start_eip); extern int lapic_can_unplug_cpu(void); #endif @@ -507,10 +508,8 @@ extern int default_check_phys_apicid_present(int phys_apicid); #endif /* CONFIG_X86_LOCAL_APIC */ #ifdef CONFIG_SMP -bool apic_id_is_primary_thread(unsigned int id); void apic_smt_update(void); #else -static inline bool apic_id_is_primary_thread(unsigned int id) { return false; } static inline void apic_smt_update(void) { } #endif diff --git a/arch/x86/include/asm/apicdef.h b/arch/x86/include/asm/apicdef.h index 68d213e83fcc..4b125e5b3187 100644 --- a/arch/x86/include/asm/apicdef.h +++ b/arch/x86/include/asm/apicdef.h @@ -2,6 +2,8 @@ #ifndef _ASM_X86_APICDEF_H #define _ASM_X86_APICDEF_H +#include <linux/bits.h> + /* * Constants for various Intel APICs. (local APIC, IOAPIC, etc.) * @@ -138,9 +140,10 @@ #define APIC_EILVT_MASKED (1 << 16) #define APIC_BASE (fix_to_virt(FIX_APIC_BASE)) -#define APIC_BASE_MSR 0x800 -#define XAPIC_ENABLE (1UL << 11) -#define X2APIC_ENABLE (1UL << 10) +#define APIC_BASE_MSR 0x800 +#define APIC_X2APIC_ID_MSR 0x802 +#define XAPIC_ENABLE BIT(11) +#define X2APIC_ENABLE BIT(10) #ifdef CONFIG_X86_32 # define MAX_IO_APICS 64 @@ -162,6 +165,7 @@ #define APIC_CPUID(apicid) ((apicid) & XAPIC_DEST_CPUS_MASK) #define NUM_APIC_CLUSTERS ((BAD_APICID + 1) >> XAPIC_DEST_CPUS_SHIFT) +#ifndef __ASSEMBLY__ /* * the local APIC register structure, memory mapped. Not terribly well * tested, but we might eventually use this one in the future - the @@ -435,4 +439,5 @@ enum apic_delivery_modes { APIC_DELIVERY_MODE_EXTINT = 7, }; +#endif /* !__ASSEMBLY__ */ #endif /* _ASM_X86_APICDEF_H */ diff --git a/arch/x86/include/asm/cpu.h b/arch/x86/include/asm/cpu.h index 78796b98a544..c854376e1cb9 100644 --- a/arch/x86/include/asm/cpu.h +++ b/arch/x86/include/asm/cpu.h @@ -30,10 +30,7 @@ struct x86_cpu { #ifdef CONFIG_HOTPLUG_CPU extern int arch_register_cpu(int num); extern void arch_unregister_cpu(int); -extern void start_cpu0(void); -#ifdef CONFIG_DEBUG_HOTPLUG_CPU0 -extern int _debug_hotplug_cpu(int cpu, int action); -#endif +extern void soft_restart_cpu(void); #endif extern void ap_init_aperfmperf(void); diff --git a/arch/x86/include/asm/cpumask.h b/arch/x86/include/asm/cpumask.h index c5aed9e9226c..4acfd57de8f1 100644 --- a/arch/x86/include/asm/cpumask.h +++ b/arch/x86/include/asm/cpumask.h @@ -4,11 +4,6 @@ #ifndef __ASSEMBLY__ #include <linux/cpumask.h> -extern cpumask_var_t cpu_callin_mask; -extern cpumask_var_t cpu_callout_mask; -extern cpumask_var_t cpu_initialized_mask; -extern cpumask_var_t cpu_sibling_setup_mask; - extern void setup_cpu_local_masks(void); /* diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h index a1e4fa58b357..d46300e94f85 100644 --- a/arch/x86/include/asm/processor.h +++ b/arch/x86/include/asm/processor.h @@ -551,7 +551,6 @@ extern void switch_gdt_and_percpu_base(int); extern void load_direct_gdt(int); extern void load_fixmap_gdt(int); extern void cpu_init(void); -extern void cpu_init_secondary(void); extern void cpu_init_exception_handling(void); extern void cr4_init(void); diff --git a/arch/x86/include/asm/realmode.h b/arch/x86/include/asm/realmode.h index f6a1737c77be..87e5482acd0d 100644 --- a/arch/x86/include/asm/realmode.h +++ b/arch/x86/include/asm/realmode.h @@ -52,6 +52,7 @@ struct trampoline_header { u64 efer; u32 cr4; u32 flags; + u32 lock; #endif }; @@ -64,6 +65,8 @@ extern unsigned long initial_stack; extern unsigned long initial_vc_handler; #endif +extern u32 *trampoline_lock; + extern unsigned char real_mode_blob[]; extern unsigned char real_mode_relocs[]; diff --git a/arch/x86/include/asm/smp.h b/arch/x86/include/asm/smp.h index 4e91054c84be..42060775a3d0 100644 --- a/arch/x86/include/asm/smp.h +++ b/arch/x86/include/asm/smp.h @@ -38,7 +38,9 @@ struct smp_ops { void (*crash_stop_other_cpus)(void); void (*smp_send_reschedule)(int cpu); - int (*cpu_up)(unsigned cpu, struct task_struct *tidle); + void (*cleanup_dead_cpu)(unsigned cpu); + void (*poll_sync_state)(void); + int (*kick_ap_alive)(unsigned cpu, struct task_struct *tidle); int (*cpu_disable)(void); void (*cpu_die)(unsigned int cpu); void (*play_dead)(void); @@ -78,11 +80,6 @@ static inline void smp_cpus_done(unsigned int max_cpus) smp_ops.smp_cpus_done(max_cpus); } -static inline int __cpu_up(unsigned int cpu, struct task_struct *tidle) -{ - return smp_ops.cpu_up(cpu, tidle); -} - static inline int __cpu_disable(void) { return smp_ops.cpu_disable(); @@ -90,7 +87,8 @@ static inline int __cpu_disable(void) static inline void __cpu_die(unsigned int cpu) { - smp_ops.cpu_die(cpu); + if (smp_ops.cpu_die) + smp_ops.cpu_die(cpu); } static inline void __noreturn play_dead(void) @@ -121,16 +119,13 @@ void native_smp_prepare_cpus(unsigned int max_cpus); void calculate_max_logical_packages(void); void native_smp_cpus_done(unsigned int max_cpus); int common_cpu_up(unsigned int cpunum, struct task_struct *tidle); -int native_cpu_up(unsigned int cpunum, struct task_struct *tidle); +int native_kick_ap(unsigned int cpu, struct task_struct *tidle); int native_cpu_disable(void); -int common_cpu_die(unsigned int cpu); -void native_cpu_die(unsigned int cpu); void __noreturn hlt_play_dead(void); void native_play_dead(void); void play_dead_common(void); void wbinvd_on_cpu(int cpu); int wbinvd_on_all_cpus(void); -void cond_wakeup_cpu0(void); void native_smp_send_reschedule(int cpu); void native_send_call_func_ipi(const struct cpumask *mask); @@ -201,7 +196,14 @@ extern void nmi_selftest(void); #endif extern unsigned int smpboot_control; +extern unsigned long apic_mmio_base; #endif /* !__ASSEMBLY__ */ +/* Control bits for startup_64 */ +#define STARTUP_READ_APICID 0x80000000 + +/* Top 8 bits are reserved for control */ +#define STARTUP_PARALLEL_MASK 0xFF000000 + #endif /* _ASM_X86_SMP_H */ diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h index 458c891a8273..caf41c4869a0 100644 --- a/arch/x86/include/asm/topology.h +++ b/arch/x86/include/asm/topology.h @@ -31,9 +31,9 @@ * CONFIG_NUMA. */ #include <linux/numa.h> +#include <linux/cpumask.h> #ifdef CONFIG_NUMA -#include <linux/cpumask.h> #include <asm/mpspec.h> #include <asm/percpu.h> @@ -139,23 +139,31 @@ static inline int topology_max_smt_threads(void) int topology_update_package_map(unsigned int apicid, unsigned int cpu); int topology_update_die_map(unsigned int dieid, unsigned int cpu); int topology_phys_to_logical_pkg(unsigned int pkg); -int topology_phys_to_logical_die(unsigned int die, unsigned int cpu); -bool topology_is_primary_thread(unsigned int cpu); bool topology_smt_supported(void); -#else + +extern struct cpumask __cpu_primary_thread_mask; +#define cpu_primary_thread_mask ((const struct cpumask *)&__cpu_primary_thread_mask) + +/** + * topology_is_primary_thread - Check whether CPU is the primary SMT thread + * @cpu: CPU to check + */ +static inline bool topology_is_primary_thread(unsigned int cpu) +{ + return cpumask_test_cpu(cpu, cpu_primary_thread_mask); +} +#else /* CONFIG_SMP */ #define topology_max_packages() (1) static inline int topology_update_package_map(unsigned int apicid, unsigned int cpu) { return 0; } static inline int topology_update_die_map(unsigned int dieid, unsigned int cpu) { return 0; } static inline int topology_phys_to_logical_pkg(unsigned int pkg) { return 0; } -static inline int topology_phys_to_logical_die(unsigned int die, - unsigned int cpu) { return 0; } static inline int topology_max_die_per_package(void) { return 1; } static inline int topology_max_smt_threads(void) { return 1; } static inline bool topology_is_primary_thread(unsigned int cpu) { return true; } static inline bool topology_smt_supported(void) { return false; } -#endif +#endif /* !CONFIG_SMP */ static inline void arch_fix_phys_package_id(int num, u32 slot) { diff --git a/arch/x86/include/asm/tsc.h b/arch/x86/include/asm/tsc.h index fbdc3d951494..dc1b03be43eb 100644 --- a/arch/x86/include/asm/tsc.h +++ b/arch/x86/include/asm/tsc.h @@ -55,12 +55,10 @@ extern bool tsc_async_resets; #ifdef CONFIG_X86_TSC extern bool tsc_store_and_check_tsc_adjust(bool bootcpu); extern void tsc_verify_tsc_adjust(bool resume); -extern void check_tsc_sync_source(int cpu); extern void check_tsc_sync_target(void); #else static inline bool tsc_store_and_check_tsc_adjust(bool bootcpu) { return false; } static inline void tsc_verify_tsc_adjust(bool resume) { } -static inline void check_tsc_sync_source(int cpu) { } static inline void check_tsc_sync_target(void) { } #endif diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h index 88085f369ff6..0bf4d735ff00 100644 --- a/arch/x86/include/asm/x86_init.h +++ b/arch/x86/include/asm/x86_init.h @@ -177,11 +177,14 @@ struct x86_init_ops { * struct x86_cpuinit_ops - platform specific cpu hotplug setups * @setup_percpu_clockev: set up the per cpu clock event device * @early_percpu_clock_init: early init of the per cpu clock event device + * @fixup_cpu_id: fixup function for cpuinfo_x86::phys_proc_id + * @parallel_bringup: Parallel bringup control */ struct x86_cpuinit_ops { void (*setup_percpu_clockev)(void); void (*early_percpu_clock_init)(void); void (*fixup_cpu_id)(struct cpuinfo_x86 *c, int node); + bool parallel_bringup; }; struct timespec64; diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c index 1328c221af30..6dfecb27b846 100644 --- a/arch/x86/kernel/acpi/sleep.c +++ b/arch/x86/kernel/acpi/sleep.c @@ -16,6 +16,7 @@ #include <asm/cacheflush.h> #include <asm/realmode.h> #include <asm/hypervisor.h> +#include <asm/smp.h> #include <linux/ftrace.h> #include "../../realmode/rm/wakeup.h" @@ -127,7 +128,13 @@ int x86_acpi_suspend_lowlevel(void) * value is in the actual %rsp register. */ current->thread.sp = (unsigned long)temp_stack + sizeof(temp_stack); - smpboot_control = smp_processor_id(); + /* + * Ensure the CPU knows which one it is when it comes back, if + * it isn't in parallel mode and expected to work that out for + * itself. + */ + if (!(smpboot_control & STARTUP_PARALLEL_MASK)) + smpboot_control = smp_processor_id(); #endif initial_code = (unsigned long)wakeup_long64; saved_magic = 0x123456789abcdef0L; diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 770557110051..af49e24b46a4 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -101,6 +101,9 @@ static int apic_extnmi __ro_after_init = APIC_EXTNMI_BSP; */ static bool virt_ext_dest_id __ro_after_init; +/* For parallel bootup. */ +unsigned long apic_mmio_base __ro_after_init; + /* * Map cpu index to physical APIC ID */ @@ -2163,6 +2166,7 @@ void __init register_lapic_address(unsigned long address) if (!x2apic_mode) { set_fixmap_nocache(FIX_APIC_BASE, address); + apic_mmio_base = APIC_BASE; apic_printk(APIC_VERBOSE, "mapped APIC to %16lx (%16lx)\n", APIC_BASE, address); } @@ -2376,7 +2380,7 @@ static int nr_logical_cpuids = 1; /* * Used to store mapping between logical CPU IDs and APIC IDs. */ -static int cpuid_to_apicid[] = { +int cpuid_to_apicid[] = { [0 ... NR_CPUS - 1] = -1, }; @@ -2386,20 +2390,31 @@ bool arch_match_cpu_phys_id(int cpu, u64 phys_id) } #ifdef CONFIG_SMP -/** - * apic_id_is_primary_thread - Check whether APIC ID belongs to a primary thread - * @apicid: APIC ID to check +static void cpu_mark_primary_thread(unsigned int cpu, unsigned int apicid) +{ + /* Isolate the SMT bit(s) in the APICID and check for 0 */ + u32 mask = (1U << (fls(smp_num_siblings) - 1)) - 1; + + if (smp_num_siblings == 1 || !(apicid & mask)) + cpumask_set_cpu(cpu, &__cpu_primary_thread_mask); +} + +/* + * Due to the utter mess of CPUID evaluation smp_num_siblings is not valid + * during early boot. Initialize the primary thread mask before SMP + * bringup. */ -bool apic_id_is_primary_thread(unsigned int apicid) +static int __init smp_init_primary_thread_mask(void) { - u32 mask; + unsigned int cpu; - if (smp_num_siblings == 1) - return true; - /* Isolate the SMT bit(s) in the APICID and check for 0 */ - mask = (1U << (fls(smp_num_siblings) - 1)) - 1; - return !(apicid & mask); + for (cpu = 0; cpu < nr_logical_cpuids; cpu++) + cpu_mark_primary_thread(cpu, cpuid_to_apicid[cpu]); + return 0; } +early_initcall(smp_init_primary_thread_mask); +#else +static inline void cpu_mark_primary_thread(unsigned int cpu, unsigned int apicid) { } #endif /* @@ -2544,6 +2559,9 @@ int generic_processor_info(int apicid, int version) set_cpu_present(cpu, true); num_processors++; + if (system_state != SYSTEM_BOOTING) + cpu_mark_primary_thread(cpu, apicid); + return cpu; } diff --git a/arch/x86/kernel/callthunks.c b/arch/x86/kernel/callthunks.c index 22ab13966427..8bb937331acb 100644 --- a/arch/x86/kernel/callthunks.c +++ b/arch/x86/kernel/callthunks.c @@ -133,8 +133,8 @@ static bool skip_addr(void *dest) /* Accounts directly */ if (dest == ret_from_fork) return true; -#ifdef CONFIG_HOTPLUG_CPU - if (dest == start_cpu0) +#if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_AMD_MEM_ENCRYPT) + if (dest == soft_restart_cpu) return true; #endif #ifdef CONFIG_FUNCTION_TRACER diff --git a/arch/x86/kernel/cpu/cacheinfo.c b/arch/x86/kernel/cpu/cacheinfo.c index 4063e8991211..8f86eacf69f7 100644 --- a/arch/x86/kernel/cpu/cacheinfo.c +++ b/arch/x86/kernel/cpu/cacheinfo.c @@ -39,6 +39,8 @@ DEFINE_PER_CPU_READ_MOSTLY(cpumask_var_t, cpu_llc_shared_map); /* Shared L2 cache maps */ DEFINE_PER_CPU_READ_MOSTLY(cpumask_var_t, cpu_l2c_shared_map); +static cpumask_var_t cpu_cacheinfo_mask; + /* Kernel controls MTRR and/or PAT MSRs. */ unsigned int memory_caching_control __ro_after_init; @@ -1172,8 +1174,10 @@ void cache_bp_restore(void) cache_cpu_init(); } -static int cache_ap_init(unsigned int cpu) +static int cache_ap_online(unsigned int cpu) { + cpumask_set_cpu(cpu, cpu_cacheinfo_mask); + if (!memory_caching_control || get_cache_aps_delayed_init()) return 0; @@ -1191,11 +1195,17 @@ static int cache_ap_init(unsigned int cpu) * lock to prevent MTRR entry changes */ stop_machine_from_inactive_cpu(cache_rendezvous_handler, NULL, - cpu_callout_mask); + cpu_cacheinfo_mask); return 0; } +static int cache_ap_offline(unsigned int cpu) +{ + cpumask_clear_cpu(cpu, cpu_cacheinfo_mask); + return 0; +} + /* * Delayed cache initialization for all AP's */ @@ -1210,9 +1220,12 @@ void cache_aps_init(void) static int __init cache_ap_register(void) { + zalloc_cpumask_var(&cpu_cacheinfo_mask, GFP_KERNEL); + cpumask_set_cpu(smp_processor_id(), cpu_cacheinfo_mask); + cpuhp_setup_state_nocalls(CPUHP_AP_CACHECTRL_STARTING, "x86/cachectrl:starting", - cache_ap_init, NULL); + cache_ap_online, cache_ap_offline); return 0; } -core_initcall(cache_ap_register); +early_initcall(cache_ap_register); diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index 46ebdd60fd96..8075eb45a3a4 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -71,14 +71,6 @@ u32 elf_hwcap2 __read_mostly; -/* all of these masks are initialized in setup_cpu_local_masks() */ -cpumask_var_t cpu_initialized_mask; -cpumask_var_t cpu_callout_mask; -cpumask_var_t cpu_callin_mask; - -/* representing cpus for which sibling maps can be computed */ -cpumask_var_t cpu_sibling_setup_mask; - /* Number of siblings per CPU package */ int smp_num_siblings = 1; EXPORT_SYMBOL(smp_num_siblings); @@ -173,15 +165,6 @@ clear_ppin: clear_cpu_cap(c, info->feature); } -/* correctly size the local cpu masks */ -void __init setup_cpu_local_masks(void) -{ - alloc_bootmem_cpumask_var(&cpu_initialized_mask); - alloc_bootmem_cpumask_var(&cpu_callin_mask); - alloc_bootmem_cpumask_var(&cpu_callout_mask); - alloc_bootmem_cpumask_var(&cpu_sibling_setup_mask); -} - static void default_init(struct cpuinfo_x86 *c) { #ifdef CONFIG_X86_64 @@ -2123,19 +2106,6 @@ static void dbg_restore_debug_regs(void) #define dbg_restore_debug_regs() #endif /* ! CONFIG_KGDB */ -static void wait_for_master_cpu(int cpu) -{ -#ifdef CONFIG_SMP - /* - * wait for ACK from master CPU before continuing - * with AP initialization - */ - WARN_ON(cpumask_test_and_set_cpu(cpu, cpu_initialized_mask)); - while (!cpumask_test_cpu(cpu, cpu_callout_mask)) - cpu_relax(); -#endif -} - static inline void setup_getcpu(int cpu) { unsigned long cpudata = vdso_encode_cpunode(cpu, early_cpu_to_node(cpu)); @@ -2158,11 +2128,7 @@ static inline void setup_getcpu(int cpu) } #ifdef CONFIG_X86_64 -static inline void ucode_cpu_init(int cpu) -{ - if (cpu) - load_ucode_ap(); -} +static inline void ucode_cpu_init(int cpu) { } static inline void tss_setup_ist(struct tss_struct *tss) { @@ -2239,8 +2205,6 @@ void cpu_init(void) struct task_struct *cur = current; int cpu = raw_smp_processor_id(); - wait_for_master_cpu(cpu); - ucode_cpu_init(cpu); #ifdef CONFIG_NUMA @@ -2291,19 +2255,6 @@ void cpu_init(void) load_fixmap_gdt(cpu); } -#ifdef CONFIG_SMP -void cpu_init_secondary(void) -{ - /* - * Relies on the BP having set-up the IDT tables, which are loaded - * on this CPU in cpu_init_exception_handling(). - */ - cpu_init_exception_handling(); - cpu_init(); - fpu__init_cpu(); -} -#endif - #ifdef CONFIG_MICROCODE_LATE_LOADING /** * store_cpu_caps() - Store a snapshot of CPU capabilities diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S index 67c8ed99144b..c9318993f959 100644 --- a/arch/x86/kernel/head_32.S +++ b/arch/x86/kernel/head_32.S @@ -138,20 +138,6 @@ SYM_CODE_START(startup_32) jmp .Ldefault_entry SYM_CODE_END(startup_32) -#ifdef CONFIG_HOTPLUG_CPU -/* - * Boot CPU0 entry point. It's called from play_dead(). Everything has been set - * up already except stack. We just set up stack here. Then call - * start_secondary(). - */ -SYM_FUNC_START(start_cpu0) - movl initial_stack, %ecx - movl %ecx, %esp - call *(initial_code) -1: jmp 1b -SYM_FUNC_END(start_cpu0) -#endif - /* * Non-boot CPU entry point; entered from trampoline.S * We can't lgdt here, because lgdt itself uses a data segment, but diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S index 113c13376e51..c5b9289837dc 100644 --- a/arch/x86/kernel/head_64.S +++ b/arch/x86/kernel/head_64.S @@ -24,7 +24,9 @@ #include "../entry/calling.h" #include <asm/export.h> #include <asm/nospec-branch.h> +#include <asm/apicdef.h> #include <asm/fixmap.h> +#include <asm/smp.h> /* * We are not able to switch in one step to the final KERNEL ADDRESS SPACE @@ -234,8 +236,67 @@ SYM_INNER_LABEL(secondary_startup_64_no_verify, SYM_L_GLOBAL) ANNOTATE_NOENDBR // above #ifdef CONFIG_SMP + /* + * For parallel boot, the APIC ID is read from the APIC, and then + * used to look up the CPU number. For booting a single CPU, the + * CPU number is encoded in smpboot_control. + * + * Bit 31 STARTUP_READ_APICID (Read APICID from APIC) + * Bit 0-23 CPU# if STARTUP_xx flags are not set + */ movl smpboot_control(%rip), %ecx + testl $STARTUP_READ_APICID, %ecx + jnz .Lread_apicid + /* + * No control bit set, single CPU bringup. CPU number is provided + * in bit 0-23. This is also the boot CPU case (CPU number 0). + */ + andl $(~STARTUP_PARALLEL_MASK), %ecx + jmp .Lsetup_cpu +.Lread_apicid: + /* Check whether X2APIC mode is already enabled */ + mov $MSR_IA32_APICBASE, %ecx + rdmsr + testl $X2APIC_ENABLE, %eax + jnz .Lread_apicid_msr + + /* Read the APIC ID from the fix-mapped MMIO space. */ + movq apic_mmio_base(%rip), %rcx + addq $APIC_ID, %rcx + movl (%rcx), %eax + shr $24, %eax + jmp .Llookup_AP + +.Lread_apicid_msr: + mov $APIC_X2APIC_ID_MSR, %ecx + rdmsr + +.Llookup_AP: + /* EAX contains the APIC ID of the current CPU */ + xorq %rcx, %rcx + leaq cpuid_to_apicid(%rip), %rbx + +.Lfind_cpunr: + cmpl (%rbx,%rcx,4), %eax + jz .Lsetup_cpu + inc %ecx +#ifdef CONFIG_FORCE_NR_CPUS + cmpl $NR_CPUS, %ecx +#else + cmpl nr_cpu_ids(%rip), %ecx +#endif + jb .Lfind_cpunr + + /* APIC ID not found in the table. Drop the trampoline lock and bail. */ + movq trampoline_lock(%rip), %rax + movl $0, (%rax) + +1: cli + hlt + jmp 1b + +.Lsetup_cpu: /* Get the per cpu offset for the given CPU# which is in ECX */ movq __per_cpu_offset(,%rcx,8), %rdx #else @@ -252,6 +313,16 @@ SYM_INNER_LABEL(secondary_startup_64_no_verify, SYM_L_GLOBAL) movq TASK_threadsp(%rax), %rsp /* + * Now that this CPU is running on its own stack, drop the realmode + * protection. For the boot CPU the pointer is NULL! + */ + movq trampoline_lock(%rip), %rax + testq %rax, %rax + jz .Lsetup_gdt + movl $0, (%rax) + +.Lsetup_gdt: + /* * We must switch to a new descriptor in kernel space for the GDT * because soon the kernel won't have access anymore to the userspace * addresses where we're currently running on. We have to do that here @@ -375,13 +446,13 @@ SYM_CODE_END(secondary_startup_64) #include "verify_cpu.S" #include "sev_verify_cbit.S" -#ifdef CONFIG_HOTPLUG_CPU +#if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_AMD_MEM_ENCRYPT) /* - * Boot CPU0 entry point. It's called from play_dead(). Everything has been set - * up already except stack. We just set up stack here. Then call - * start_secondary() via .Ljump_to_C_code. + * Entry point for soft restart of a CPU. Invoked from xxx_play_dead() for + * restarting the boot CPU or for restarting SEV guest CPUs after CPU hot + * unplug. Everything is set up already except the stack. */ -SYM_CODE_START(start_cpu0) +SYM_CODE_START(soft_restart_cpu) ANNOTATE_NOENDBR UNWIND_HINT_END_OF_STACK @@ -390,7 +461,7 @@ SYM_CODE_START(start_cpu0) movq TASK_threadsp(%rcx), %rsp jmp .Ljump_to_C_code -SYM_CODE_END(start_cpu0) +SYM_CODE_END(soft_restart_cpu) #endif #ifdef CONFIG_AMD_MEM_ENCRYPT @@ -433,6 +504,8 @@ SYM_DATA(initial_code, .quad x86_64_start_kernel) #ifdef CONFIG_AMD_MEM_ENCRYPT SYM_DATA(initial_vc_handler, .quad handle_vc_boot_ghcb) #endif + +SYM_DATA(trampoline_lock, .quad 0); __FINITDATA __INIT diff --git a/arch/x86/kernel/sev.c b/arch/x86/kernel/sev.c index b031244d6d2d..d095a5d3c14a 100644 --- a/arch/x86/kernel/sev.c +++ b/arch/x86/kernel/sev.c @@ -1328,7 +1328,7 @@ static void sev_es_play_dead(void) * If we get here, the VCPU was woken up again. Jump to CPU * startup code to get it back online. */ - start_cpu0(); + soft_restart_cpu(); } #else /* CONFIG_HOTPLUG_CPU */ #define sev_es_play_dead native_play_dead diff --git a/arch/x86/kernel/smp.c b/arch/x86/kernel/smp.c index 375b33ecafa2..0d54115c3859 100644 --- a/arch/x86/kernel/smp.c +++ b/arch/x86/kernel/smp.c @@ -268,8 +268,7 @@ struct smp_ops smp_ops = { #endif .smp_send_reschedule = native_smp_send_reschedule, - .cpu_up = native_cpu_up, - .cpu_die = native_cpu_die, + .kick_ap_alive = native_kick_ap, .cpu_disable = native_cpu_disable, .play_dead = native_play_dead, diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 352f0ce1ece4..8de80608fd01 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -57,6 +57,8 @@ #include <linux/pgtable.h> #include <linux/overflow.h> #include <linux/stackprotector.h> +#include <linux/cpuhotplug.h> +#include <linux/mc146818rtc.h> #include <asm/acpi.h> #include <asm/cacheinfo.h> @@ -74,7 +76,7 @@ #include <asm/fpu/api.h> #include <asm/setup.h> #include <asm/uv/uv.h> -#include <linux/mc146818rtc.h> +#include <asm/microcode.h> #include <asm/i8259.h> #include <asm/misc.h> #include <asm/qspinlock.h> @@ -101,6 +103,12 @@ EXPORT_PER_CPU_SYMBOL(cpu_die_map); DEFINE_PER_CPU_READ_MOSTLY(struct cpuinfo_x86, cpu_info); EXPORT_PER_CPU_SYMBOL(cpu_info); +/* CPUs which are the primary SMT threads */ +struct cpumask __cpu_primary_thread_mask __read_mostly; + +/* Representing CPUs for which sibling maps can be computed */ +static cpumask_var_t cpu_sibling_setup_mask; + /* Logical package management. We might want to allocate that dynamically */ unsigned int __max_logical_packages __read_mostly; EXPORT_SYMBOL(__max_logical_packages); @@ -121,7 +129,6 @@ int arch_update_cpu_topology(void) return retval; } - static unsigned int smpboot_warm_reset_vector_count; static inline void smpboot_setup_warm_reset_vector(unsigned long start_eip) @@ -154,66 +161,59 @@ static inline void smpboot_restore_warm_reset_vector(void) } -/* - * Report back to the Boot Processor during boot time or to the caller processor - * during CPU online. - */ -static void smp_callin(void) +/* Run the next set of setup steps for the upcoming CPU */ +static void ap_starting(void) { - int cpuid; + int cpuid = smp_processor_id(); /* - * If waken up by an INIT in an 82489DX configuration - * cpu_callout_mask guarantees we don't get here before - * an INIT_deassert IPI reaches our local APIC, so it is - * now safe to touch our local APIC. - */ - cpuid = smp_processor_id(); - - /* - * the boot CPU has finished the init stage and is spinning - * on callin_map until we finish. We are free to set up this - * CPU, first the APIC. (this is probably redundant on most - * boards) + * If woken up by an INIT in an 82489DX configuration the alive + * synchronization guarantees that the CPU does not reach this + * point before an INIT_deassert IPI reaches the local APIC, so it + * is now safe to touch the local APIC. + * + * Set up this CPU, first the APIC, which is probably redundant on + * most boards. */ apic_ap_setup(); - /* - * Save our processor parameters. Note: this information - * is needed for clock calibration. - */ + /* Save the processor parameters. */ smp_store_cpu_info(cpuid); /* * The topology information must be up to date before - * calibrate_delay() and notify_cpu_starting(). + * notify_cpu_starting(). */ - set_cpu_sibling_map(raw_smp_processor_id()); + set_cpu_sibling_map(cpuid); ap_init_aperfmperf(); - /* - * Get our bogomips. - * Update loops_per_jiffy in cpu_data. Previous call to - * smp_store_cpu_info() stored a value that is close but not as - * accurate as the value just calculated. - */ - calibrate_delay(); - cpu_data(cpuid).loops_per_jiffy = loops_per_jiffy; pr_debug("Stack at about %p\n", &cpuid); wmb(); + /* + * This runs the AP through all the cpuhp states to its target + * state CPUHP_ONLINE. + */ notify_cpu_starting(cpuid); +} +static void ap_calibrate_delay(void) +{ /* - * Allow the master to continue. + * Calibrate the delay loop and update loops_per_jiffy in cpu_data. + * smp_store_cpu_info() stored a value that is close but not as + * accurate as the value just calculated. + * + * As this is invoked after the TSC synchronization check, + * calibrate_delay_is_known() will skip the calibration routine + * when TSC is synchronized across sockets. */ - cpumask_set_cpu(cpuid, cpu_callin_mask); + calibrate_delay(); + cpu_data(smp_processor_id()).loops_per_jiffy = loops_per_jiffy; } -static int cpu0_logical_apicid; -static int enable_start_cpu0; /* * Activate a secondary processor. */ @@ -226,24 +226,63 @@ static void notrace start_secondary(void *unused) */ cr4_init(); -#ifdef CONFIG_X86_32 - /* switch away from the initial page table */ - load_cr3(swapper_pg_dir); - __flush_tlb_all(); -#endif - cpu_init_secondary(); + /* + * 32-bit specific. 64-bit reaches this code with the correct page + * table established. Yet another historical divergence. + */ + if (IS_ENABLED(CONFIG_X86_32)) { + /* switch away from the initial page table */ + load_cr3(swapper_pg_dir); + __flush_tlb_all(); + } + + cpu_init_exception_handling(); + + /* + * 32-bit systems load the microcode from the ASM startup code for + * historical reasons. + * + * On 64-bit systems load it before reaching the AP alive + * synchronization point below so it is not part of the full per + * CPU serialized bringup part when "parallel" bringup is enabled. + * + * That's even safe when hyperthreading is enabled in the CPU as + * the core code starts the primary threads first and leaves the + * secondary threads waiting for SIPI. Loading microcode on + * physical cores concurrently is a safe operation. + * + * This covers both the Intel specific issue that concurrent + * microcode loading on SMT siblings must be prohibited and the + * vendor independent issue`that microcode loading which changes + * CPUID, MSRs etc. must be strictly serialized to maintain + * software state correctness. + */ + if (IS_ENABLED(CONFIG_X86_64)) + load_ucode_ap(); + + /* + * Synchronization point with the hotplug core. Sets this CPUs + * synchronization state to ALIVE and spin-waits for the control CPU to + * release this CPU for further bringup. + */ + cpuhp_ap_sync_alive(); + + cpu_init(); + fpu__init_cpu(); rcu_cpu_starting(raw_smp_processor_id()); x86_cpuinit.early_percpu_clock_init(); - smp_callin(); - enable_start_cpu0 = 0; + ap_starting(); + + /* Check TSC synchronization with the control CPU. */ + check_tsc_sync_target(); - /* otherwise gcc will move up smp_processor_id before the cpu_init */ - barrier(); /* - * Check TSC synchronization with the boot CPU: + * Calibrate the delay loop after the TSC synchronization check. + * This allows to skip the calibration when TSC is synchronized + * across sockets. */ - check_tsc_sync_target(); + ap_calibrate_delay(); speculative_store_bypass_ht_init(); @@ -257,7 +296,6 @@ static void notrace start_secondary(void *unused) set_cpu_online(smp_processor_id(), true); lapic_online(); unlock_vector_lock(); - cpu_set_state_online(smp_processor_id()); x86_platform.nmi_init(); /* enable local interrupts */ @@ -270,15 +308,6 @@ static void notrace start_secondary(void *unused) } /** - * topology_is_primary_thread - Check whether CPU is the primary SMT thread - * @cpu: CPU to check - */ -bool topology_is_primary_thread(unsigned int cpu) -{ - return apic_id_is_primary_thread(per_cpu(x86_cpu_to_apicid, cpu)); -} - -/** * topology_smt_supported - Check whether SMT is supported by the CPUs */ bool topology_smt_supported(void) @@ -288,6 +317,7 @@ bool topology_smt_supported(void) /** * topology_phys_to_logical_pkg - Map a physical package id to a logical + * @phys_pkg: The physical package id to map * * Returns logical package id or -1 if not found */ @@ -304,15 +334,17 @@ int topology_phys_to_logical_pkg(unsigned int phys_pkg) return -1; } EXPORT_SYMBOL(topology_phys_to_logical_pkg); + /** * topology_phys_to_logical_die - Map a physical die id to logical + * @die_id: The physical die id to map + * @cur_cpu: The CPU for which the mapping is done * * Returns logical die id or -1 if not found */ -int topology_phys_to_logical_die(unsigned int die_id, unsigned int cur_cpu) +static int topology_phys_to_logical_die(unsigned int die_id, unsigned int cur_cpu) { - int cpu; - int proc_id = cpu_data(cur_cpu).phys_proc_id; + int cpu, proc_id = cpu_data(cur_cpu).phys_proc_id; for_each_possible_cpu(cpu) { struct cpuinfo_x86 *c = &cpu_data(cpu); @@ -323,7 +355,6 @@ int topology_phys_to_logical_die(unsigned int die_id, unsigned int cur_cpu) } return -1; } -EXPORT_SYMBOL(topology_phys_to_logical_die); /** * topology_update_package_map - Update the physical to logical package map @@ -398,7 +429,7 @@ void smp_store_cpu_info(int id) c->cpu_index = id; /* * During boot time, CPU0 has this setup already. Save the info when - * bringing up AP or offlined CPU0. + * bringing up an AP. */ identify_secondary_cpu(c); c->initialized = true; @@ -706,9 +737,9 @@ static void impress_friends(void) * Allow the user to impress friends. */ pr_debug("Before bogomips\n"); - for_each_possible_cpu(cpu) - if (cpumask_test_cpu(cpu, cpu_callout_mask)) - bogosum += cpu_data(cpu).loops_per_jiffy; + for_each_online_cpu(cpu) + bogosum += cpu_data(cpu).loops_per_jiffy; + pr_info("Total of %d processors activated (%lu.%02lu BogoMIPS)\n", num_online_cpus(), bogosum/(500000/HZ), @@ -795,51 +826,14 @@ static void __init smp_quirk_init_udelay(void) } /* - * Poke the other CPU in the eye via NMI to wake it up. Remember that the normal - * INIT, INIT, STARTUP sequence will reset the chip hard for us, and this - * won't ... remember to clear down the APIC, etc later. + * Wake up AP by INIT, INIT, STARTUP sequence. */ -int -wakeup_secondary_cpu_via_nmi(int apicid, unsigned long start_eip) -{ - u32 dm = apic->dest_mode_logical ? APIC_DEST_LOGICAL : APIC_DEST_PHYSICAL; - unsigned long send_status, accept_status = 0; - int maxlvt; - - /* Target chip */ - /* Boot on the stack */ - /* Kick the second */ - apic_icr_write(APIC_DM_NMI | dm, apicid); - - pr_debug("Waiting for send to finish...\n"); - send_status = safe_apic_wait_icr_idle(); - - /* - * Give the other CPU some time to accept the IPI. - */ - udelay(200); - if (APIC_INTEGRATED(boot_cpu_apic_version)) { - maxlvt = lapic_get_maxlvt(); - if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */ - apic_write(APIC_ESR, 0); - accept_status = (apic_read(APIC_ESR) & 0xEF); - } - pr_debug("NMI sent\n"); - - if (send_status) - pr_err("APIC never delivered???\n"); - if (accept_status) - pr_err("APIC delivery error (%lx)\n", accept_status); - - return (send_status | accept_status); -} - -static int -wakeup_secondary_cpu_via_init(int phys_apicid, unsigned long start_eip) +static int wakeup_secondary_cpu_via_init(int phys_apicid, unsigned long start_eip) { unsigned long send_status = 0, accept_status = 0; int maxlvt, num_starts, j; + preempt_disable(); maxlvt = lapic_get_maxlvt(); /* @@ -945,15 +939,16 @@ wakeup_secondary_cpu_via_init(int phys_apicid, unsigned long start_eip) if (accept_status) pr_err("APIC delivery error (%lx)\n", accept_status); + preempt_enable(); return (send_status | accept_status); } /* reduce the number of lines printed when booting a large cpu count system */ static void announce_cpu(int cpu, int apicid) { + static int width, node_width, first = 1; static int current_node = NUMA_NO_NODE; int node = early_cpu_to_node(cpu); - static int width, node_width; if (!width) width = num_digits(num_possible_cpus()) + 1; /* + '#' sign */ @@ -961,10 +956,10 @@ static void announce_cpu(int cpu, int apicid) if (!node_width) node_width = num_digits(num_possible_nodes()) + 1; /* + '#' */ - if (cpu == 1) - printk(KERN_INFO "x86: Booting SMP configuration:\n"); - if (system_state < SYSTEM_RUNNING) { + if (first) + pr_info("x86: Booting SMP configuration:\n"); + if (node != current_node) { if (current_node > (-1)) pr_cont("\n"); @@ -975,77 +970,16 @@ static void announce_cpu(int cpu, int apicid) } /* Add padding for the BSP */ - if (cpu == 1) + if (first) pr_cont("%*s", width + 1, " "); + first = 0; pr_cont("%*s#%d", width - num_digits(cpu), " ", cpu); - } else pr_info("Booting Node %d Processor %d APIC 0x%x\n", node, cpu, apicid); } -static int wakeup_cpu0_nmi(unsigned int cmd, struct pt_regs *regs) -{ - int cpu; - - cpu = smp_processor_id(); - if (cpu == 0 && !cpu_online(cpu) && enable_start_cpu0) - return NMI_HANDLED; - - return NMI_DONE; -} - -/* - * Wake up AP by INIT, INIT, STARTUP sequence. - * - * Instead of waiting for STARTUP after INITs, BSP will execute the BIOS - * boot-strap code which is not a desired behavior for waking up BSP. To - * void the boot-strap code, wake up CPU0 by NMI instead. - * - * This works to wake up soft offlined CPU0 only. If CPU0 is hard offlined - * (i.e. physically hot removed and then hot added), NMI won't wake it up. - * We'll change this code in the future to wake up hard offlined CPU0 if - * real platform and request are available. - */ -static int -wakeup_cpu_via_init_nmi(int cpu, unsigned long start_ip, int apicid, - int *cpu0_nmi_registered) -{ - int id; - int boot_error; - - preempt_disable(); - - /* - * Wake up AP by INIT, INIT, STARTUP sequence. - */ - if (cpu) { - boot_error = wakeup_secondary_cpu_via_init(apicid, start_ip); - goto out; - } - - /* - * Wake up BSP by nmi. - * - * Register a NMI handler to help wake up CPU0. - */ - boot_error = register_nmi_handler(NMI_LOCAL, - wakeup_cpu0_nmi, 0, "wake_cpu0"); - - if (!boot_error) { - enable_start_cpu0 = 1; - *cpu0_nmi_registered = 1; - id = apic->dest_mode_logical ? cpu0_logical_apicid : apicid; - boot_error = wakeup_secondary_cpu_via_nmi(id, start_ip); - } - -out: - preempt_enable(); - - return boot_error; -} - int common_cpu_up(unsigned int cpu, struct task_struct *idle) { int ret; @@ -1071,17 +1005,13 @@ int common_cpu_up(unsigned int cpu, struct task_struct *idle) /* * NOTE - on most systems this is a PHYSICAL apic ID, but on multiquad * (ie clustered apic addressing mode), this is a LOGICAL apic ID. - * Returns zero if CPU booted OK, else error code from + * Returns zero if startup was successfully sent, else error code from * ->wakeup_secondary_cpu. */ -static int do_boot_cpu(int apicid, int cpu, struct task_struct *idle, - int *cpu0_nmi_registered) +static int do_boot_cpu(int apicid, int cpu, struct task_struct *idle) { - /* start_ip had better be page-aligned! */ unsigned long start_ip = real_mode_header->trampoline_start; - - unsigned long boot_error = 0; - unsigned long timeout; + int ret; #ifdef CONFIG_X86_64 /* If 64-bit wakeup method exists, use the 64-bit mode trampoline IP */ @@ -1094,7 +1024,7 @@ static int do_boot_cpu(int apicid, int cpu, struct task_struct *idle, if (IS_ENABLED(CONFIG_X86_32)) { early_gdt_descr.address = (unsigned long)get_cpu_gdt_rw(cpu); initial_stack = idle->thread.sp; - } else { + } else if (!(smpboot_control & STARTUP_PARALLEL_MASK)) { smpboot_control = cpu; } @@ -1108,7 +1038,6 @@ static int do_boot_cpu(int apicid, int cpu, struct task_struct *idle, * This grunge runs the startup process for * the targeted processor. */ - if (x86_platform.legacy.warm_reset) { pr_debug("Setting warm reset code and vector.\n"); @@ -1123,13 +1052,6 @@ static int do_boot_cpu(int apicid, int cpu, struct task_struct *idle, } } - /* - * AP might wait on cpu_callout_mask in cpu_init() with - * cpu_initialized_mask set if previous attempt to online - * it timed-out. Clear cpu_initialized_mask so that after - * INIT/SIPI it could start with a clean state. - */ - cpumask_clear_cpu(cpu, cpu_initialized_mask); smp_mb(); /* @@ -1137,66 +1059,25 @@ static int do_boot_cpu(int apicid, int cpu, struct task_struct *idle, * - Use a method from the APIC driver if one defined, with wakeup * straight to 64-bit mode preferred over wakeup to RM. * Otherwise, - * - Use an INIT boot APIC message for APs or NMI for BSP. + * - Use an INIT boot APIC message */ if (apic->wakeup_secondary_cpu_64) - boot_error = apic->wakeup_secondary_cpu_64(apicid, start_ip); + ret = apic->wakeup_secondary_cpu_64(apicid, start_ip); else if (apic->wakeup_secondary_cpu) - boot_error = apic->wakeup_secondary_cpu(apicid, start_ip); + ret = apic->wakeup_secondary_cpu(apicid, start_ip); else - boot_error = wakeup_cpu_via_init_nmi(cpu, start_ip, apicid, - cpu0_nmi_registered); - - if (!boot_error) { - /* - * Wait 10s total for first sign of life from AP - */ - boot_error = -1; - timeout = jiffies + 10*HZ; - while (time_before(jiffies, timeout)) { - if (cpumask_test_cpu(cpu, cpu_initialized_mask)) { - /* - * Tell AP to proceed with initialization - */ - cpumask_set_cpu(cpu, cpu_callout_mask); - boot_error = 0; - break; - } - schedule(); - } - } - - if (!boot_error) { - /* - * Wait till AP completes initial initialization - */ - while (!cpumask_test_cpu(cpu, cpu_callin_mask)) { - /* - * Allow other tasks to run while we wait for the - * AP to come online. This also gives a chance - * for the MTRR work(triggered by the AP coming online) - * to be completed in the stop machine context. - */ - schedule(); - } - } - - if (x86_platform.legacy.warm_reset) { - /* - * Cleanup possible dangling ends... - */ - smpboot_restore_warm_reset_vector(); - } + ret = wakeup_secondary_cpu_via_init(apicid, start_ip); - return boot_error; + /* If the wakeup mechanism failed, cleanup the warm reset vector */ + if (ret) + arch_cpuhp_cleanup_kick_cpu(cpu); + return ret; } -int native_cpu_up(unsigned int cpu, struct task_struct *tidle) +int native_kick_ap(unsigned int cpu, struct task_struct *tidle) { int apicid = apic->cpu_present_to_apicid(cpu); - int cpu0_nmi_registered = 0; - unsigned long flags; - int err, ret = 0; + int err; lockdep_assert_irqs_enabled(); @@ -1210,24 +1091,11 @@ int native_cpu_up(unsigned int cpu, struct task_struct *tidle) } /* - * Already booted CPU? - */ - if (cpumask_test_cpu(cpu, cpu_callin_mask)) { - pr_debug("do_boot_cpu %d Already started\n", cpu); - return -ENOSYS; - } - - /* * Save current MTRR state in case it was changed since early boot * (e.g. by the ACPI SMI) to initialize new CPUs with MTRRs in sync: */ mtrr_save_state(); - /* x86 CPUs take themselves offline, so delayed offline is OK. */ - err = cpu_check_up_prepare(cpu); - if (err && err != -EBUSY) - return err; - /* the FPU context is blank, nobody can own it */ per_cpu(fpu_fpregs_owner_ctx, cpu) = NULL; @@ -1235,41 +1103,44 @@ int native_cpu_up(unsigned int cpu, struct task_struct *tidle) if (err) return err; - err = do_boot_cpu(apicid, cpu, tidle, &cpu0_nmi_registered); - if (err) { + err = do_boot_cpu(apicid, cpu, tidle); + if (err) pr_err("do_boot_cpu failed(%d) to wakeup CPU#%u\n", err, cpu); - ret = -EIO; - goto unreg_nmi; - } - /* - * Check TSC synchronization with the AP (keep irqs disabled - * while doing so): - */ - local_irq_save(flags); - check_tsc_sync_source(cpu); - local_irq_restore(flags); + return err; +} - while (!cpu_online(cpu)) { - cpu_relax(); - touch_nmi_watchdog(); - } +int arch_cpuhp_kick_ap_alive(unsigned int cpu, struct task_struct *tidle) +{ + return smp_ops.kick_ap_alive(cpu, tidle); +} -unreg_nmi: - /* - * Clean up the nmi handler. Do this after the callin and callout sync - * to avoid impact of possible long unregister time. - */ - if (cpu0_nmi_registered) - unregister_nmi_handler(NMI_LOCAL, "wake_cpu0"); +void arch_cpuhp_cleanup_kick_cpu(unsigned int cpu) +{ + /* Cleanup possible dangling ends... */ + if (smp_ops.kick_ap_alive == native_kick_ap && x86_platform.legacy.warm_reset) + smpboot_restore_warm_reset_vector(); +} - return ret; +void arch_cpuhp_cleanup_dead_cpu(unsigned int cpu) +{ + if (smp_ops.cleanup_dead_cpu) + smp_ops.cleanup_dead_cpu(cpu); + + if (system_state == SYSTEM_RUNNING) + pr_info("CPU %u is now offline\n", cpu); +} + +void arch_cpuhp_sync_state_poll(void) +{ + if (smp_ops.poll_sync_state) + smp_ops.poll_sync_state(); } /** - * arch_disable_smp_support() - disables SMP support for x86 at runtime + * arch_disable_smp_support() - Disables SMP support for x86 at boottime */ -void arch_disable_smp_support(void) +void __init arch_disable_smp_support(void) { disable_ioapic_support(); } @@ -1361,14 +1232,6 @@ static void __init smp_cpu_index_default(void) } } -static void __init smp_get_logical_apicid(void) -{ - if (x2apic_mode) - cpu0_logical_apicid = apic_read(APIC_LDR); - else - cpu0_logical_apicid = GET_APIC_LOGICAL_ID(apic_read(APIC_LDR)); -} - void __init smp_prepare_cpus_common(void) { unsigned int i; @@ -1379,7 +1242,6 @@ void __init smp_prepare_cpus_common(void) * Setup boot CPU information */ smp_store_boot_cpu_info(); /* Final full version of the data */ - cpumask_copy(cpu_callin_mask, cpumask_of(0)); mb(); for_each_possible_cpu(i) { @@ -1402,6 +1264,21 @@ void __init smp_prepare_cpus_common(void) set_cpu_sibling_map(0); } +#ifdef CONFIG_X86_64 +/* Establish whether parallel bringup can be supported. */ +bool __init arch_cpuhp_init_parallel_bringup(void) +{ + if (!x86_cpuinit.parallel_bringup) { + pr_info("Parallel CPU startup disabled by the platform\n"); + return false; + } + + smpboot_control = STARTUP_READ_APICID; + pr_debug("Parallel CPU startup enabled: 0x%08x\n", smpboot_control); + return true; +} +#endif + /* * Prepare for SMP bootup. * @max_cpus: configured maximum number of CPUs, It is a legacy parameter @@ -1431,8 +1308,6 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus) /* Setup local timer */ x86_init.timers.setup_percpu_clockev(); - smp_get_logical_apicid(); - pr_info("CPU0: "); print_cpu_info(&cpu_data(0)); @@ -1466,9 +1341,6 @@ void __init native_smp_prepare_boot_cpu(void) if (!IS_ENABLED(CONFIG_SMP)) switch_gdt_and_percpu_base(me); - /* already set me in cpu_online_mask in boot_cpu_init() */ - cpumask_set_cpu(me, cpu_callout_mask); - cpu_set_state_online(me); native_pv_lock_init(); } @@ -1592,6 +1464,12 @@ __init void prefill_possible_map(void) set_cpu_possible(i, true); } +/* correctly size the local cpu masks */ +void __init setup_cpu_local_masks(void) +{ + alloc_bootmem_cpumask_var(&cpu_sibling_setup_mask); +} + #ifdef CONFIG_HOTPLUG_CPU /* Recompute SMT state for all CPUs on offline */ @@ -1650,10 +1528,6 @@ static void remove_siblinginfo(int cpu) static void remove_cpu_from_maps(int cpu) { set_cpu_online(cpu, false); - cpumask_clear_cpu(cpu, cpu_callout_mask); - cpumask_clear_cpu(cpu, cpu_callin_mask); - /* was set by cpu_init() */ - cpumask_clear_cpu(cpu, cpu_initialized_mask); numa_remove_cpu(cpu); } @@ -1704,54 +1578,17 @@ int native_cpu_disable(void) return 0; } -int common_cpu_die(unsigned int cpu) -{ - int ret = 0; - - /* We don't do anything here: idle task is faking death itself. */ - - /* They ack this in play_dead() by setting CPU_DEAD */ - if (cpu_wait_death(cpu, 5)) { - if (system_state == SYSTEM_RUNNING) - pr_info("CPU %u is now offline\n", cpu); - } else { - pr_err("CPU %u didn't die...\n", cpu); - ret = -1; - } - - return ret; -} - -void native_cpu_die(unsigned int cpu) -{ - common_cpu_die(cpu); -} - void play_dead_common(void) { idle_task_exit(); - /* Ack it */ - (void)cpu_report_death(); - + cpuhp_ap_report_dead(); /* * With physical CPU hotplug, we should halt the cpu */ local_irq_disable(); } -/** - * cond_wakeup_cpu0 - Wake up CPU0 if needed. - * - * If NMI wants to wake up CPU0, start CPU0. - */ -void cond_wakeup_cpu0(void) -{ - if (smp_processor_id() == 0 && enable_start_cpu0) - start_cpu0(); -} -EXPORT_SYMBOL_GPL(cond_wakeup_cpu0); - /* * We need to flush the caches before going to sleep, lest we have * dirty data in our caches when we come back up. @@ -1819,8 +1656,6 @@ static inline void mwait_play_dead(void) __monitor(mwait_ptr, 0, 0); mb(); __mwait(eax, 0); - - cond_wakeup_cpu0(); } } @@ -1829,11 +1664,8 @@ void __noreturn hlt_play_dead(void) if (__this_cpu_read(cpu_info.x86) >= 4) wbinvd(); - while (1) { + while (1) native_halt(); - - cond_wakeup_cpu0(); - } } void native_play_dead(void) @@ -1852,12 +1684,6 @@ int native_cpu_disable(void) return -ENOSYS; } -void native_cpu_die(unsigned int cpu) -{ - /* We said "no" in __cpu_disable */ - BUG(); -} - void native_play_dead(void) { BUG(); diff --git a/arch/x86/kernel/topology.c b/arch/x86/kernel/topology.c index 1b83377274b8..ca004e2e4469 100644 --- a/arch/x86/kernel/topology.c +++ b/arch/x86/kernel/topology.c @@ -38,102 +38,12 @@ static DEFINE_PER_CPU(struct x86_cpu, cpu_devices); #ifdef CONFIG_HOTPLUG_CPU - -#ifdef CONFIG_BOOTPARAM_HOTPLUG_CPU0 -static int cpu0_hotpluggable = 1; -#else -static int cpu0_hotpluggable; -static int __init enable_cpu0_hotplug(char *str) -{ - cpu0_hotpluggable = 1; - return 1; -} - -__setup("cpu0_hotplug", enable_cpu0_hotplug); -#endif - -#ifdef CONFIG_DEBUG_HOTPLUG_CPU0 -/* - * This function offlines a CPU as early as possible and allows userspace to - * boot up without the CPU. The CPU can be onlined back by user after boot. - * - * This is only called for debugging CPU offline/online feature. - */ -int _debug_hotplug_cpu(int cpu, int action) +int arch_register_cpu(int cpu) { - int ret; - - if (!cpu_is_hotpluggable(cpu)) - return -EINVAL; + struct x86_cpu *xc = per_cpu_ptr(&cpu_devices, cpu); - switch (action) { - case 0: - ret = remove_cpu(cpu); - if (!ret) - pr_info("DEBUG_HOTPLUG_CPU0: CPU %u is now offline\n", cpu); - else - pr_debug("Can't offline CPU%d.\n", cpu); - break; - case 1: - ret = add_cpu(cpu); - if (ret) - pr_debug("Can't online CPU%d.\n", cpu); - - break; - default: - ret = -EINVAL; - } - - return ret; -} - -static int __init debug_hotplug_cpu(void) -{ - _debug_hotplug_cpu(0, 0); - return 0; -} - -late_initcall_sync(debug_hotplug_cpu); -#endif /* CONFIG_DEBUG_HOTPLUG_CPU0 */ - -int arch_register_cpu(int num) -{ - struct cpuinfo_x86 *c = &cpu_data(num); - - /* - * Currently CPU0 is only hotpluggable on Intel platforms. Other - * vendors can add hotplug support later. - * Xen PV guests don't support CPU0 hotplug at all. - */ - if (c->x86_vendor != X86_VENDOR_INTEL || - cpu_feature_enabled(X86_FEATURE_XENPV)) - cpu0_hotpluggable = 0; - - /* - * Two known BSP/CPU0 dependencies: Resume from suspend/hibernate - * depends on BSP. PIC interrupts depend on BSP. - * - * If the BSP dependencies are under control, one can tell kernel to - * enable BSP hotplug. This basically adds a control file and - * one can attempt to offline BSP. - */ - if (num == 0 && cpu0_hotpluggable) { - unsigned int irq; - /* - * We won't take down the boot processor on i386 if some - * interrupts only are able to be serviced by the BSP in PIC. - */ - for_each_active_irq(irq) { - if (!IO_APIC_IRQ(irq) && irq_has_action(irq)) { - cpu0_hotpluggable = 0; - break; - } - } - } - if (num || cpu0_hotpluggable) - per_cpu(cpu_devices, num).cpu.hotpluggable = 1; - - return register_cpu(&per_cpu(cpu_devices, num).cpu, num); + xc->cpu.hotpluggable = cpu > 0; + return register_cpu(&xc->cpu, cpu); } EXPORT_SYMBOL(arch_register_cpu); diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c index 344698852146..1412b771651e 100644 --- a/arch/x86/kernel/tsc.c +++ b/arch/x86/kernel/tsc.c @@ -1598,10 +1598,7 @@ void __init tsc_init(void) #ifdef CONFIG_SMP /* - * If we have a constant TSC and are using the TSC for the delay loop, - * we can skip clock calibration if another cpu in the same socket has already - * been calibrated. This assumes that CONSTANT_TSC applies to all - * cpus in the socket - this should be a safe assumption. + * Check whether existing calibration data can be reused. */ unsigned long calibrate_delay_is_known(void) { @@ -1609,6 +1606,21 @@ unsigned long calibrate_delay_is_known(void) int constant_tsc = cpu_has(&cpu_data(cpu), X86_FEATURE_CONSTANT_TSC); const struct cpumask *mask = topology_core_cpumask(cpu); + /* + * If TSC has constant frequency and TSC is synchronized across + * sockets then reuse CPU0 calibration. + */ + if (constant_tsc && !tsc_unstable) + return cpu_data(0).loops_per_jiffy; + + /* + * If TSC has constant frequency and TSC is not synchronized across + * sockets and this is not the first CPU in the socket, then reuse + * the calibration value of an already online CPU on that socket. + * + * This assumes that CONSTANT_TSC is consistent for all CPUs in a + * socket. + */ if (!constant_tsc || !mask) return 0; diff --git a/arch/x86/kernel/tsc_sync.c b/arch/x86/kernel/tsc_sync.c index 9452dc9664b5..bbc440c93e08 100644 --- a/arch/x86/kernel/tsc_sync.c +++ b/arch/x86/kernel/tsc_sync.c @@ -245,7 +245,6 @@ bool tsc_store_and_check_tsc_adjust(bool bootcpu) */ static atomic_t start_count; static atomic_t stop_count; -static atomic_t skip_test; static atomic_t test_runs; /* @@ -344,21 +343,14 @@ static inline unsigned int loop_timeout(int cpu) } /* - * Source CPU calls into this - it waits for the freshly booted - * target CPU to arrive and then starts the measurement: + * The freshly booted CPU initiates this via an async SMP function call. */ -void check_tsc_sync_source(int cpu) +static void check_tsc_sync_source(void *__cpu) { + unsigned int cpu = (unsigned long)__cpu; int cpus = 2; /* - * No need to check if we already know that the TSC is not - * synchronized or if we have no TSC. - */ - if (unsynchronized_tsc()) - return; - - /* * Set the maximum number of test runs to * 1 if the CPU does not provide the TSC_ADJUST MSR * 3 if the MSR is available, so the target can try to adjust @@ -368,16 +360,9 @@ void check_tsc_sync_source(int cpu) else atomic_set(&test_runs, 3); retry: - /* - * Wait for the target to start or to skip the test: - */ - while (atomic_read(&start_count) != cpus - 1) { - if (atomic_read(&skip_test) > 0) { - atomic_set(&skip_test, 0); - return; - } + /* Wait for the target to start. */ + while (atomic_read(&start_count) != cpus - 1) cpu_relax(); - } /* * Trigger the target to continue into the measurement too: @@ -397,14 +382,14 @@ retry: if (!nr_warps) { atomic_set(&test_runs, 0); - pr_debug("TSC synchronization [CPU#%d -> CPU#%d]: passed\n", + pr_debug("TSC synchronization [CPU#%d -> CPU#%u]: passed\n", smp_processor_id(), cpu); } else if (atomic_dec_and_test(&test_runs) || random_warps) { /* Force it to 0 if random warps brought us here */ atomic_set(&test_runs, 0); - pr_warn("TSC synchronization [CPU#%d -> CPU#%d]:\n", + pr_warn("TSC synchronization [CPU#%d -> CPU#%u]:\n", smp_processor_id(), cpu); pr_warn("Measured %Ld cycles TSC warp between CPUs, " "turning off TSC clock.\n", max_warp); @@ -457,11 +442,12 @@ void check_tsc_sync_target(void) * SoCs the TSC is frequency synchronized, but still the TSC ADJUST * register might have been wreckaged by the BIOS.. */ - if (tsc_store_and_check_tsc_adjust(false) || tsc_clocksource_reliable) { - atomic_inc(&skip_test); + if (tsc_store_and_check_tsc_adjust(false) || tsc_clocksource_reliable) return; - } + /* Kick the control CPU into the TSC synchronization function */ + smp_call_function_single(cpumask_first(cpu_online_mask), check_tsc_sync_source, + (unsigned long *)(unsigned long)cpu, 0); retry: /* * Register this CPU's participation and wait for the diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c index d82f4fa2f1bf..1da4baa34d1b 100644 --- a/arch/x86/kernel/x86_init.c +++ b/arch/x86/kernel/x86_init.c @@ -126,6 +126,7 @@ struct x86_init_ops x86_init __initdata = { struct x86_cpuinit_ops x86_cpuinit = { .early_percpu_clock_init = x86_init_noop, .setup_percpu_clockev = setup_secondary_APIC_clock, + .parallel_bringup = true, }; static void default_nmi_init(void) { }; diff --git a/arch/x86/mm/mem_encrypt_amd.c b/arch/x86/mm/mem_encrypt_amd.c index e0b51c09109f..4855e5f92970 100644 --- a/arch/x86/mm/mem_encrypt_amd.c +++ b/arch/x86/mm/mem_encrypt_amd.c @@ -501,6 +501,21 @@ void __init sme_early_init(void) x86_platform.guest.enc_status_change_finish = amd_enc_status_change_finish; x86_platform.guest.enc_tlb_flush_required = amd_enc_tlb_flush_required; x86_platform.guest.enc_cache_flush_required = amd_enc_cache_flush_required; + + /* + * AMD-SEV-ES intercepts the RDMSR to read the X2APIC ID in the + * parallel bringup low level code. That raises #VC which cannot be + * handled there. + * It does not provide a RDMSR GHCB protocol so the early startup + * code cannot directly communicate with the secure firmware. The + * alternative solution to retrieve the APIC ID via CPUID(0xb), + * which is covered by the GHCB protocol, is not viable either + * because there is no enforcement of the CPUID(0xb) provided + * "initial" APIC ID to be the same as the real APIC ID. + * Disable parallel bootup. + */ + if (sev_status & MSR_AMD64_SEV_ES_ENABLED) + x86_cpuinit.parallel_bringup = false; } void __init mem_encrypt_free_decrypted_mem(void) diff --git a/arch/x86/power/cpu.c b/arch/x86/power/cpu.c index 7a4d5e911415..63230ff8cf4f 100644 --- a/arch/x86/power/cpu.c +++ b/arch/x86/power/cpu.c @@ -351,43 +351,6 @@ static int bsp_pm_callback(struct notifier_block *nb, unsigned long action, case PM_HIBERNATION_PREPARE: ret = bsp_check(); break; -#ifdef CONFIG_DEBUG_HOTPLUG_CPU0 - case PM_RESTORE_PREPARE: - /* - * When system resumes from hibernation, online CPU0 because - * 1. it's required for resume and - * 2. the CPU was online before hibernation - */ - if (!cpu_online(0)) - _debug_hotplug_cpu(0, 1); - break; - case PM_POST_RESTORE: - /* - * When a resume really happens, this code won't be called. - * - * This code is called only when user space hibernation software - * prepares for snapshot device during boot time. So we just - * call _debug_hotplug_cpu() to restore to CPU0's state prior to - * preparing the snapshot device. - * - * This works for normal boot case in our CPU0 hotplug debug - * mode, i.e. CPU0 is offline and user mode hibernation - * software initializes during boot time. - * - * If CPU0 is online and user application accesses snapshot - * device after boot time, this will offline CPU0 and user may - * see different CPU0 state before and after accessing - * the snapshot device. But hopefully this is not a case when - * user debugging CPU0 hotplug. Even if users hit this case, - * they can easily online CPU0 back. - * - * To simplify this debug code, we only consider normal boot - * case. Otherwise we need to remember CPU0's state and restore - * to that state and resolve racy conditions etc. - */ - _debug_hotplug_cpu(0, 0); - break; -#endif default: break; } diff --git a/arch/x86/realmode/init.c b/arch/x86/realmode/init.c index af565816d2ba..788e5559549f 100644 --- a/arch/x86/realmode/init.c +++ b/arch/x86/realmode/init.c @@ -154,6 +154,9 @@ static void __init setup_real_mode(void) trampoline_header->flags = 0; + trampoline_lock = &trampoline_header->lock; + *trampoline_lock = 0; + trampoline_pgd = (u64 *) __va(real_mode_header->trampoline_pgd); /* Map the real mode stub as virtual == physical */ diff --git a/arch/x86/realmode/rm/trampoline_64.S b/arch/x86/realmode/rm/trampoline_64.S index e38d61d6562e..c9f76fae902e 100644 --- a/arch/x86/realmode/rm/trampoline_64.S +++ b/arch/x86/realmode/rm/trampoline_64.S @@ -37,6 +37,24 @@ .text .code16 +.macro LOCK_AND_LOAD_REALMODE_ESP lock_pa=0 + /* + * Make sure only one CPU fiddles with the realmode stack + */ +.Llock_rm\@: + .if \lock_pa + lock btsl $0, pa_tr_lock + .else + lock btsl $0, tr_lock + .endif + jnc 2f + pause + jmp .Llock_rm\@ +2: + # Setup stack + movl $rm_stack_end, %esp +.endm + .balign PAGE_SIZE SYM_CODE_START(trampoline_start) cli # We should be safe anyway @@ -49,8 +67,7 @@ SYM_CODE_START(trampoline_start) mov %ax, %es mov %ax, %ss - # Setup stack - movl $rm_stack_end, %esp + LOCK_AND_LOAD_REALMODE_ESP call verify_cpu # Verify the cpu supports long mode testl %eax, %eax # Check for return code @@ -93,8 +110,7 @@ SYM_CODE_START(sev_es_trampoline_start) mov %ax, %es mov %ax, %ss - # Setup stack - movl $rm_stack_end, %esp + LOCK_AND_LOAD_REALMODE_ESP jmp .Lswitch_to_protected SYM_CODE_END(sev_es_trampoline_start) @@ -177,7 +193,7 @@ SYM_CODE_START(pa_trampoline_compat) * In compatibility mode. Prep ESP and DX for startup_32, then disable * paging and complete the switch to legacy 32-bit mode. */ - movl $rm_stack_end, %esp + LOCK_AND_LOAD_REALMODE_ESP lock_pa=1 movw $__KERNEL_DS, %dx movl $(CR0_STATE & ~X86_CR0_PG), %eax @@ -241,6 +257,7 @@ SYM_DATA_START(trampoline_header) SYM_DATA(tr_efer, .space 8) SYM_DATA(tr_cr4, .space 4) SYM_DATA(tr_flags, .space 4) + SYM_DATA(tr_lock, .space 4) SYM_DATA_END(trampoline_header) #include "trampoline_common.S" diff --git a/arch/x86/xen/enlighten_hvm.c b/arch/x86/xen/enlighten_hvm.c index c1cd28e915a3..a6820ca940bf 100644 --- a/arch/x86/xen/enlighten_hvm.c +++ b/arch/x86/xen/enlighten_hvm.c @@ -161,13 +161,12 @@ static int xen_cpu_up_prepare_hvm(unsigned int cpu) int rc = 0; /* - * This can happen if CPU was offlined earlier and - * offlining timed out in common_cpu_die(). + * If a CPU was offlined earlier and offlining timed out then the + * lock mechanism is still initialized. Uninit it unconditionally + * as it's safe to call even if already uninited. Interrupts and + * timer have already been handled in xen_cpu_dead_hvm(). */ - if (cpu_report_state(cpu) == CPU_DEAD_FROZEN) { - xen_smp_intr_free(cpu); - xen_uninit_lock_cpu(cpu); - } + xen_uninit_lock_cpu(cpu); if (cpu_acpi_id(cpu) != U32_MAX) per_cpu(xen_vcpu_id, cpu) = cpu_acpi_id(cpu); diff --git a/arch/x86/xen/smp_hvm.c b/arch/x86/xen/smp_hvm.c index b70afdff419c..ac95d1981cc0 100644 --- a/arch/x86/xen/smp_hvm.c +++ b/arch/x86/xen/smp_hvm.c @@ -55,18 +55,16 @@ static void __init xen_hvm_smp_prepare_cpus(unsigned int max_cpus) } #ifdef CONFIG_HOTPLUG_CPU -static void xen_hvm_cpu_die(unsigned int cpu) +static void xen_hvm_cleanup_dead_cpu(unsigned int cpu) { - if (common_cpu_die(cpu) == 0) { - if (xen_have_vector_callback) { - xen_smp_intr_free(cpu); - xen_uninit_lock_cpu(cpu); - xen_teardown_timer(cpu); - } + if (xen_have_vector_callback) { + xen_smp_intr_free(cpu); + xen_uninit_lock_cpu(cpu); + xen_teardown_timer(cpu); } } #else -static void xen_hvm_cpu_die(unsigned int cpu) +static void xen_hvm_cleanup_dead_cpu(unsigned int cpu) { BUG(); } @@ -77,7 +75,7 @@ void __init xen_hvm_smp_init(void) smp_ops.smp_prepare_boot_cpu = xen_hvm_smp_prepare_boot_cpu; smp_ops.smp_prepare_cpus = xen_hvm_smp_prepare_cpus; smp_ops.smp_cpus_done = xen_smp_cpus_done; - smp_ops.cpu_die = xen_hvm_cpu_die; + smp_ops.cleanup_dead_cpu = xen_hvm_cleanup_dead_cpu; if (!xen_have_vector_callback) { #ifdef CONFIG_PARAVIRT_SPINLOCKS diff --git a/arch/x86/xen/smp_pv.c b/arch/x86/xen/smp_pv.c index a9cf8c8fa074..a92e8002b5cf 100644 --- a/arch/x86/xen/smp_pv.c +++ b/arch/x86/xen/smp_pv.c @@ -62,6 +62,7 @@ static void cpu_bringup(void) int cpu; cr4_init(); + cpuhp_ap_sync_alive(); cpu_init(); touch_softlockup_watchdog(); @@ -83,7 +84,7 @@ static void cpu_bringup(void) set_cpu_online(cpu, true); - cpu_set_state_online(cpu); /* Implies full memory barrier. */ + smp_mb(); /* We can take interrupts now: we're officially "up". */ local_irq_enable(); @@ -254,15 +255,12 @@ cpu_initialize_context(unsigned int cpu, struct task_struct *idle) struct desc_struct *gdt; unsigned long gdt_mfn; - /* used to tell cpu_init() that it can proceed with initialization */ - cpumask_set_cpu(cpu, cpu_callout_mask); if (cpumask_test_and_set_cpu(cpu, xen_cpu_initialized_map)) return 0; ctxt = kzalloc(sizeof(*ctxt), GFP_KERNEL); if (ctxt == NULL) { cpumask_clear_cpu(cpu, xen_cpu_initialized_map); - cpumask_clear_cpu(cpu, cpu_callout_mask); return -ENOMEM; } @@ -316,7 +314,7 @@ cpu_initialize_context(unsigned int cpu, struct task_struct *idle) return 0; } -static int xen_pv_cpu_up(unsigned int cpu, struct task_struct *idle) +static int xen_pv_kick_ap(unsigned int cpu, struct task_struct *idle) { int rc; @@ -326,14 +324,6 @@ static int xen_pv_cpu_up(unsigned int cpu, struct task_struct *idle) xen_setup_runstate_info(cpu); - /* - * PV VCPUs are always successfully taken down (see 'while' loop - * in xen_cpu_die()), so -EBUSY is an error. - */ - rc = cpu_check_up_prepare(cpu); - if (rc) - return rc; - /* make sure interrupts start blocked */ per_cpu(xen_vcpu, cpu)->evtchn_upcall_mask = 1; @@ -343,15 +333,20 @@ static int xen_pv_cpu_up(unsigned int cpu, struct task_struct *idle) xen_pmu_init(cpu); - rc = HYPERVISOR_vcpu_op(VCPUOP_up, xen_vcpu_nr(cpu), NULL); - BUG_ON(rc); - - while (cpu_report_state(cpu) != CPU_ONLINE) - HYPERVISOR_sched_op(SCHEDOP_yield, NULL); + /* + * Why is this a BUG? If the hypercall fails then everything can be + * rolled back, no? + */ + BUG_ON(HYPERVISOR_vcpu_op(VCPUOP_up, xen_vcpu_nr(cpu), NULL)); return 0; } +static void xen_pv_poll_sync_state(void) +{ + HYPERVISOR_sched_op(SCHEDOP_yield, NULL); +} + #ifdef CONFIG_HOTPLUG_CPU static int xen_pv_cpu_disable(void) { @@ -367,18 +362,18 @@ static int xen_pv_cpu_disable(void) static void xen_pv_cpu_die(unsigned int cpu) { - while (HYPERVISOR_vcpu_op(VCPUOP_is_up, - xen_vcpu_nr(cpu), NULL)) { + while (HYPERVISOR_vcpu_op(VCPUOP_is_up, xen_vcpu_nr(cpu), NULL)) { __set_current_state(TASK_UNINTERRUPTIBLE); schedule_timeout(HZ/10); } +} - if (common_cpu_die(cpu) == 0) { - xen_smp_intr_free(cpu); - xen_uninit_lock_cpu(cpu); - xen_teardown_timer(cpu); - xen_pmu_finish(cpu); - } +static void xen_pv_cleanup_dead_cpu(unsigned int cpu) +{ + xen_smp_intr_free(cpu); + xen_uninit_lock_cpu(cpu); + xen_teardown_timer(cpu); + xen_pmu_finish(cpu); } static void __noreturn xen_pv_play_dead(void) /* used only with HOTPLUG_CPU */ @@ -400,6 +395,11 @@ static void xen_pv_cpu_die(unsigned int cpu) BUG(); } +static void xen_pv_cleanup_dead_cpu(unsigned int cpu) +{ + BUG(); +} + static void __noreturn xen_pv_play_dead(void) { BUG(); @@ -438,8 +438,10 @@ static const struct smp_ops xen_smp_ops __initconst = { .smp_prepare_cpus = xen_pv_smp_prepare_cpus, .smp_cpus_done = xen_smp_cpus_done, - .cpu_up = xen_pv_cpu_up, + .kick_ap_alive = xen_pv_kick_ap, .cpu_die = xen_pv_cpu_die, + .cleanup_dead_cpu = xen_pv_cleanup_dead_cpu, + .poll_sync_state = xen_pv_poll_sync_state, .cpu_disable = xen_pv_cpu_disable, .play_dead = xen_pv_play_dead, |