1494 files changed, 47386 insertions, 30494 deletions

diff --git a/arch/Kconfig b/arch/Kconfig
index 2a439fb8069e..a1124481d910 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -27,6 +27,9 @@ config HAVE_IMA_KEXEC
 config HOTPLUG_SMT
 	bool
 
+config GENERIC_ENTRY
+       bool
+
 config OPROFILE
 	tristate "OProfile system profiling"
 	depends on PROFILING
@@ -754,13 +757,6 @@ config ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT
 	depends on MMU
 	select ARCH_HAS_ELF_RANDOMIZE
 
-config HAVE_COPY_THREAD_TLS
-	bool
-	help
-	  Architecture provides copy_thread_tls to accept tls argument via
-	  normal C parameter passing, rather than extracting the syscall
-	  argument from pt_regs.
-
 config HAVE_STACK_VALIDATION
 	bool
 	help
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 10862c5a8c76..9c5f06e8eb9b 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -7,6 +7,7 @@ config ALPHA
 	select ARCH_NO_PREEMPT
 	select ARCH_NO_SG_CHAIN
 	select ARCH_USE_CMPXCHG_LOCKREF
+	select DMA_OPS if PCI
 	select FORCE_PCI if !ALPHA_JENSEN
 	select PCI_DOMAINS if PCI
 	select PCI_SYSCALL if PCI
diff --git a/arch/alpha/include/asm/atomic.h b/arch/alpha/include/asm/atomic.h
index 2144530d1428..e41c113c6688 100644
--- a/arch/alpha/include/asm/atomic.h
+++ b/arch/alpha/include/asm/atomic.h
@@ -16,15 +16,14 @@
 
 /*
  * To ensure dependency ordering is preserved for the _relaxed and
- * _release atomics, an smp_read_barrier_depends() is unconditionally
- * inserted into the _relaxed variants, which are used to build the
- * barriered versions. Avoid redundant back-to-back fences in the
- * _acquire and _fence versions.
+ * _release atomics, an smp_mb() is unconditionally inserted into the
+ * _relaxed variants, which are used to build the barriered versions.
+ * Avoid redundant back-to-back fences in the _acquire and _fence
+ * versions.
  */
 #define __atomic_acquire_fence()
 #define __atomic_post_full_fence()
 
-#define ATOMIC_INIT(i)		{ (i) }
 #define ATOMIC64_INIT(i)	{ (i) }
 
 #define atomic_read(v)		READ_ONCE((v)->counter)
@@ -70,7 +69,7 @@ static inline int atomic_##op##_return_relaxed(int i, atomic_t *v)	\
 	".previous"							\
 	:"=&r" (temp), "=m" (v->counter), "=&r" (result)		\
 	:"Ir" (i), "m" (v->counter) : "memory");			\
-	smp_read_barrier_depends();					\
+	smp_mb();							\
 	return result;							\
 }
 
@@ -88,7 +87,7 @@ static inline int atomic_fetch_##op##_relaxed(int i, atomic_t *v)	\
 	".previous"							\
 	:"=&r" (temp), "=m" (v->counter), "=&r" (result)		\
 	:"Ir" (i), "m" (v->counter) : "memory");			\
-	smp_read_barrier_depends();					\
+	smp_mb();							\
 	return result;							\
 }
 
@@ -123,7 +122,7 @@ static __inline__ s64 atomic64_##op##_return_relaxed(s64 i, atomic64_t * v)	\
 	".previous"							\
 	:"=&r" (temp), "=m" (v->counter), "=&r" (result)		\
 	:"Ir" (i), "m" (v->counter) : "memory");			\
-	smp_read_barrier_depends();					\
+	smp_mb();							\
 	return result;							\
 }
 
@@ -141,7 +140,7 @@ static __inline__ s64 atomic64_fetch_##op##_relaxed(s64 i, atomic64_t * v)	\
 	".previous"							\
 	:"=&r" (temp), "=m" (v->counter), "=&r" (result)		\
 	:"Ir" (i), "m" (v->counter) : "memory");			\
-	smp_read_barrier_depends();					\
+	smp_mb();							\
 	return result;							\
 }
 
diff --git a/arch/alpha/include/asm/barrier.h b/arch/alpha/include/asm/barrier.h
index 92ec486a4f9e..c56bfffc9918 100644
--- a/arch/alpha/include/asm/barrier.h
+++ b/arch/alpha/include/asm/barrier.h
@@ -2,64 +2,15 @@
 #ifndef __BARRIER_H
 #define __BARRIER_H
 
-#include <asm/compiler.h>
-
 #define mb()	__asm__ __volatile__("mb": : :"memory")
 #define rmb()	__asm__ __volatile__("mb": : :"memory")
 #define wmb()	__asm__ __volatile__("wmb": : :"memory")
 
-/**
- * read_barrier_depends - Flush all pending reads that subsequents reads
- * depend on.
- *
- * No data-dependent reads from memory-like regions are ever reordered
- * over this barrier.  All reads preceding this primitive are guaranteed
- * to access memory (but not necessarily other CPUs' caches) before any
- * reads following this primitive that depend on the data return by
- * any of the preceding reads.  This primitive is much lighter weight than
- * rmb() on most CPUs, and is never heavier weight than is
- * rmb().
- *
- * These ordering constraints are respected by both the local CPU
- * and the compiler.
- *
- * Ordering is not guaranteed by anything other than these primitives,
- * not even by data dependencies.  See the documentation for
- * memory_barrier() for examples and URLs to more information.
- *
- * For example, the following code would force ordering (the initial
- * value of "a" is zero, "b" is one, and "p" is "&a"):
- *
- * <programlisting>
- *	CPU 0				CPU 1
- *
- *	b = 2;
- *	memory_barrier();
- *	p = &b;				q = p;
- *					read_barrier_depends();
- *					d = *q;
- * </programlisting>
- *
- * because the read of "*q" depends on the read of "p" and these
- * two reads are separated by a read_barrier_depends().  However,
- * the following code, with the same initial values for "a" and "b":
- *
- * <programlisting>
- *	CPU 0				CPU 1
- *
- *	a = 2;
- *	memory_barrier();
- *	b = 3;				y = b;
- *					read_barrier_depends();
- *					x = a;
- * </programlisting>
- *
- * does not enforce ordering, since there is no data dependency between
- * the read of "a" and the read of "b".  Therefore, on some CPUs, such
- * as Alpha, "y" could be set to 3 and "x" to 0.  Use rmb()
- * in cases like this where there are no data dependencies.
- */
-#define read_barrier_depends() __asm__ __volatile__("mb": : :"memory")
+#define __smp_load_acquire(p)						\
+({									\
+	compiletime_assert_atomic_type(*p);				\
+	__READ_ONCE(*p);						\
+})
 
 #ifdef CONFIG_SMP
 #define __ASM_SMP_MB	"\tmb\n"
diff --git a/arch/alpha/include/asm/pgtable.h b/arch/alpha/include/asm/pgtable.h
index 162c17b2631f..660b14ce1317 100644
--- a/arch/alpha/include/asm/pgtable.h
+++ b/arch/alpha/include/asm/pgtable.h
@@ -277,9 +277,9 @@ extern inline pte_t pte_mkdirty(pte_t pte)	{ pte_val(pte) |= __DIRTY_BITS; retur
 extern inline pte_t pte_mkyoung(pte_t pte)	{ pte_val(pte) |= __ACCESS_BITS; return pte; }
 
 /*
- * The smp_read_barrier_depends() in the following functions are required to
- * order the load of *dir (the pointer in the top level page table) with any
- * subsequent load of the returned pmd_t *ret (ret is data dependent on *dir).
+ * The smp_rmb() in the following functions are required to order the load of
+ * *dir (the pointer in the top level page table) with any subsequent load of
+ * the returned pmd_t *ret (ret is data dependent on *dir).
  *
  * If this ordering is not enforced, the CPU might load an older value of
  * *ret, which may be uninitialized data. See mm/memory.c:__pte_alloc for
@@ -293,7 +293,7 @@ extern inline pte_t pte_mkyoung(pte_t pte)	{ pte_val(pte) |= __ACCESS_BITS; retu
 extern inline pmd_t * pmd_offset(pud_t * dir, unsigned long address)
 {
 	pmd_t *ret = (pmd_t *) pud_page_vaddr(*dir) + ((address >> PMD_SHIFT) & (PTRS_PER_PAGE - 1));
-	smp_read_barrier_depends(); /* see above */
+	smp_rmb(); /* see above */
 	return ret;
 }
 #define pmd_offset pmd_offset
@@ -303,7 +303,7 @@ extern inline pte_t * pte_offset_kernel(pmd_t * dir, unsigned long address)
 {
 	pte_t *ret = (pte_t *) pmd_page_vaddr(*dir)
 		+ ((address >> PAGE_SHIFT) & (PTRS_PER_PAGE - 1));
-	smp_read_barrier_depends(); /* see above */
+	smp_rmb(); /* see above */
 	return ret;
 }
 #define pte_offset_kernel pte_offset_kernel
diff --git a/arch/alpha/include/asm/rwonce.h b/arch/alpha/include/asm/rwonce.h
new file mode 100644
index 000000000000..35542bcf92b3
--- /dev/null
+++ b/arch/alpha/include/asm/rwonce.h
@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2019 Google LLC.
+ */
+#ifndef __ASM_RWONCE_H
+#define __ASM_RWONCE_H
+
+#ifdef CONFIG_SMP
+
+#include <asm/barrier.h>
+
+/*
+ * Alpha is apparently daft enough to reorder address-dependent loads
+ * on some CPU implementations. Knock some common sense into it with
+ * a memory barrier in READ_ONCE().
+ *
+ * For the curious, more information about this unusual reordering is
+ * available in chapter 15 of the "perfbook":
+ *
+ *  https://kernel.org/pub/linux/kernel/people/paulmck/perfbook/perfbook.html
+ *
+ */
+#define __READ_ONCE(x)							\
+({									\
+	__unqual_scalar_typeof(x) __x =					\
+		(*(volatile typeof(__x) *)(&(x)));			\
+	mb();								\
+	(typeof(x))__x;							\
+})
+
+#endif /* CONFIG_SMP */
+
+#include <asm-generic/rwonce.h>
+
+#endif /* __ASM_RWONCE_H */
diff --git a/arch/alpha/kernel/process.c b/arch/alpha/kernel/process.c
index b45f0b0d6511..7462a7911002 100644
--- a/arch/alpha/kernel/process.c
+++ b/arch/alpha/kernel/process.c
@@ -233,10 +233,9 @@ release_thread(struct task_struct *dead_task)
 /*
  * Copy architecture-specific thread state
  */
-int
-copy_thread(unsigned long clone_flags, unsigned long usp,
-	    unsigned long kthread_arg,
-	    struct task_struct *p)
+int copy_thread(unsigned long clone_flags, unsigned long usp,
+		unsigned long kthread_arg, struct task_struct *p,
+		unsigned long tls)
 {
 	extern void ret_from_fork(void);
 	extern void ret_from_kernel_thread(void);
@@ -267,7 +266,7 @@ copy_thread(unsigned long clone_flags, unsigned long usp,
 	   required for proper operation in the case of a threaded
 	   application calling fork.  */
 	if (clone_flags & CLONE_SETTLS)
-		childti->pcb.unique = regs->r20;
+		childti->pcb.unique = tls;
 	else
 		regs->r20 = 0;	/* OSF/1 has some strange fork() semantics.  */
 	childti->pcb.usp = usp ?: rdusp();
diff --git a/arch/alpha/kernel/syscalls/syscall.tbl b/arch/alpha/kernel/syscalls/syscall.tbl
index 5ddd128d4b7a..a28fb211881d 100644
--- a/arch/alpha/kernel/syscalls/syscall.tbl
+++ b/arch/alpha/kernel/syscalls/syscall.tbl
@@ -475,6 +475,7 @@
 543	common	fspick				sys_fspick
 544	common	pidfd_open			sys_pidfd_open
 # 545 reserved for clone3
+546	common	close_range			sys_close_range
 547	common	openat2				sys_openat2
 548	common	pidfd_getfd			sys_pidfd_getfd
 549	common	faccessat2			sys_faccessat2
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index fddc70029727..ba00c4e1e1c2 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -29,7 +29,6 @@ config ARC
 	select GENERIC_SMP_IDLE_THREAD
 	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_TRACEHOOK
-	select HAVE_COPY_THREAD_TLS
 	select HAVE_DEBUG_STACKOVERFLOW
 	select HAVE_DEBUG_KMEMLEAK
 	select HAVE_FUTEX_CMPXCHG if FUTEX
@@ -170,6 +169,15 @@ config ARC_CPU_HS
 
 endchoice
 
+config ARC_TUNE_MCPU
+	string "Override default -mcpu compiler flag"
+	default ""
+	help
+	  Override default -mcpu=xxx compiler flag (which is set depending on
+	  the ISA version) with the specified value.
+	  NOTE: If specified flag isn't supported by current compiler the
+	  ISA default value will be used as a fallback.
+
 config CPU_BIG_ENDIAN
 	bool "Enable Big Endian Mode"
 	help
@@ -465,6 +473,12 @@ config ARC_IRQ_NO_AUTOSAVE
 	  This is programmable and can be optionally disabled in which case
 	  software INTERRUPT_PROLOGUE/EPILGUE do the needed work
 
+config ARC_LPB_DISABLE
+	bool "Disable loop buffer (LPB)"
+	help
+	  On HS cores, loop buffer (LPB) is programmable in runtime and can
+	  be optionally disabled.
+
 endif # ISA_ARCV2
 
 endmenu   # "ARC CPU Configuration"
diff --git a/arch/arc/Makefile b/arch/arc/Makefile
index 20e9ab6cc521..d00f8b8afd08 100644
--- a/arch/arc/Makefile
+++ b/arch/arc/Makefile
@@ -10,8 +10,25 @@ CROSS_COMPILE := $(call cc-cross-prefix, arc-linux- arceb-linux-)
 endif
 
 cflags-y	+= -fno-common -pipe -fno-builtin -mmedium-calls -D__linux__
-cflags-$(CONFIG_ISA_ARCOMPACT)	+= -mA7
-cflags-$(CONFIG_ISA_ARCV2)	+= -mcpu=hs38
+
+tune-mcpu-def-$(CONFIG_ISA_ARCOMPACT)	:= -mcpu=arc700
+tune-mcpu-def-$(CONFIG_ISA_ARCV2)	:= -mcpu=hs38
+
+ifeq ($(CONFIG_ARC_TUNE_MCPU),"")
+cflags-y				+= $(tune-mcpu-def-y)
+else
+tune-mcpu				:= $(shell echo $(CONFIG_ARC_TUNE_MCPU))
+tune-mcpu-ok 				:= $(call cc-option-yn, $(tune-mcpu))
+ifeq ($(tune-mcpu-ok),y)
+cflags-y				+= $(tune-mcpu)
+else
+# The flag provided by 'CONFIG_ARC_TUNE_MCPU' option isn't known by this compiler
+# (probably the compiler is too old). Use ISA default mcpu flag instead as a safe option.
+$(warning ** WARNING ** CONFIG_ARC_TUNE_MCPU flag '$(tune-mcpu)' is unknown, fallback to '$(tune-mcpu-def-y)')
+cflags-y				+= $(tune-mcpu-def-y)
+endif
+endif
+
 
 ifdef CONFIG_ARC_CURR_IN_REG
 # For a global register defintion, make sure it gets passed to every file
diff --git a/arch/arc/include/asm/atomic.h b/arch/arc/include/asm/atomic.h
index 7298ce84762e..c614857eb209 100644
--- a/arch/arc/include/asm/atomic.h
+++ b/arch/arc/include/asm/atomic.h
@@ -14,8 +14,6 @@
 #include <asm/barrier.h>
 #include <asm/smp.h>
 
-#define ATOMIC_INIT(i)	{ (i) }
-
 #ifndef CONFIG_ARC_PLAT_EZNPS
 
 #define atomic_read(v)  READ_ONCE((v)->counter)
diff --git a/arch/arc/include/asm/elf.h b/arch/arc/include/asm/elf.h
index c77a0e3671ac..0284ace0e1ab 100644
--- a/arch/arc/include/asm/elf.h
+++ b/arch/arc/include/asm/elf.h
@@ -19,7 +19,7 @@
 #define  R_ARC_32_PCREL		0x31
 
 /*to set parameters in the core dumps */
-#define ELF_ARCH		EM_ARCOMPACT
+#define ELF_ARCH		EM_ARC_INUSE
 #define ELF_CLASS		ELFCLASS32
 
 #ifdef CONFIG_CPU_BIG_ENDIAN
diff --git a/arch/arc/include/asm/irqflags-compact.h b/arch/arc/include/asm/irqflags-compact.h
index 7fc73fef5e29..863d63ad18d6 100644
--- a/arch/arc/include/asm/irqflags-compact.h
+++ b/arch/arc/include/asm/irqflags-compact.h
@@ -90,6 +90,9 @@ static inline void arch_local_irq_restore(unsigned long flags)
 /*
  * Unconditionally Enable IRQs
  */
+#ifdef CONFIG_ARC_COMPACT_IRQ_LEVELS
+extern void arch_local_irq_enable(void);
+#else
 static inline void arch_local_irq_enable(void)
 {
 	unsigned long temp;
@@ -102,7 +105,7 @@ static inline void arch_local_irq_enable(void)
 	: "n"((STATUS_E1_MASK | STATUS_E2_MASK))
 	: "cc", "memory");
 }
-
+#endif
 
 /*
  * Unconditionally Disable IRQs
diff --git a/arch/arc/kernel/entry.S b/arch/arc/kernel/entry.S
index 60406ec62eb8..ea00c8a17f07 100644
--- a/arch/arc/kernel/entry.S
+++ b/arch/arc/kernel/entry.S
@@ -165,7 +165,6 @@ END(EV_Extension)
 tracesys:
 	; save EFA in case tracer wants the PC of traced task
 	; using ERET won't work since next-PC has already committed
-	lr  r12, [efa]
 	GET_CURR_TASK_FIELD_PTR   TASK_THREAD, r11
 	st  r12, [r11, THREAD_FAULT_ADDR]	; thread.fault_address
 
@@ -208,15 +207,9 @@ tracesys_exit:
 ; Breakpoint TRAP
 ; ---------------------------------------------
 trap_with_param:
-
-	; stop_pc info by gdb needs this info
-	lr  r0, [efa]
+	mov r0, r12	; EFA in case ptracer/gdb wants stop_pc
 	mov r1, sp
 
-	; Now that we have read EFA, it is safe to do "fake" rtie
-	;   and get out of CPU exception mode
-	FAKE_RET_FROM_EXCPN
-
 	; Save callee regs in case gdb wants to have a look
 	; SP will grow up by size of CALLEE Reg-File
 	; NOTE: clobbers r12
@@ -243,6 +236,10 @@ ENTRY(EV_Trap)
 
 	EXCEPTION_PROLOGUE
 
+	lr  r12, [efa]
+
+	FAKE_RET_FROM_EXCPN
+
 	;============ TRAP 1   :breakpoints
 	; Check ECR for trap with arg (PROLOGUE ensures r10 has ECR)
 	bmsk.f 0, r10, 7
@@ -250,9 +247,6 @@ ENTRY(EV_Trap)
 
 	;============ TRAP  (no param): syscall top level
 
-	; First return from Exception to pure K mode (Exception/IRQs renabled)
-	FAKE_RET_FROM_EXCPN
-
 	; If syscall tracing ongoing, invoke pre-post-hooks
 	GET_CURR_THR_INFO_FLAGS   r10
 	btst r10, TIF_SYSCALL_TRACE
diff --git a/arch/arc/kernel/head.S b/arch/arc/kernel/head.S
index 6eb23f1545ee..17fd1ed700cc 100644
--- a/arch/arc/kernel/head.S
+++ b/arch/arc/kernel/head.S
@@ -59,6 +59,14 @@
 	bclr	r5, r5, STATUS_AD_BIT
 #endif
 	kflag	r5
+
+#ifdef CONFIG_ARC_LPB_DISABLE
+	lr	r5, [ARC_REG_LPB_BUILD]
+	breq    r5, 0, 1f		; LPB doesn't exist
+	mov	r5, 1
+	sr	r5, [ARC_REG_LPB_CTRL]
+1:
+#endif /* CONFIG_ARC_LPB_DISABLE */
 #endif
 	; Config DSP_CTRL properly, so kernel may use integer multiply,
 	; multiply-accumulate, and divide operations
diff --git a/arch/arc/kernel/process.c b/arch/arc/kernel/process.c
index 8c8e5172fecd..105420c23c8b 100644
--- a/arch/arc/kernel/process.c
+++ b/arch/arc/kernel/process.c
@@ -173,8 +173,9 @@ asmlinkage void ret_from_fork(void);
  * |    user_r25    |
  * ------------------  <===== END of PAGE
  */
-int copy_thread_tls(unsigned long clone_flags, unsigned long usp,
-	unsigned long kthread_arg, struct task_struct *p, unsigned long tls)
+int copy_thread(unsigned long clone_flags, unsigned long usp,
+		unsigned long kthread_arg, struct task_struct *p,
+		unsigned long tls)
 {
 	struct pt_regs *c_regs;        /* child's pt_regs */
 	unsigned long *childksp;       /* to unwind out of __switch_to() */
diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c
index dad8a656a2f1..41f07b3e594e 100644
--- a/arch/arc/kernel/setup.c
+++ b/arch/arc/kernel/setup.c
@@ -58,10 +58,12 @@ static const struct id_to_str arc_legacy_rel[] = {
 	{ 0x00,		NULL   }
 };
 
-static const struct id_to_str arc_cpu_rel[] = {
+static const struct id_to_str arc_hs_ver54_rel[] = {
 	/* UARCH.MAJOR,	Release */
 	{  0,		"R3.10a"},
 	{  1,		"R3.50a"},
+	{  2,		"R3.60a"},
+	{  3,		"R4.00a"},
 	{  0xFF,	NULL   }
 };
 
@@ -117,12 +119,6 @@ static void decode_arc_core(struct cpuinfo_arc *cpu)
 	struct bcr_uarch_build_arcv2 uarch;
 	const struct id_to_str *tbl;
 
-	/*
-	 * Up until (including) the first core4 release (0x54) things were
-	 * simple: AUX IDENTITY.ARCVER was sufficient to identify arc family
-	 * and release: 0x50 to 0x53 was HS38, 0x54 was HS48 (dual issue)
-	 */
-
 	if (cpu->core.family < 0x54) { /* includes arc700 */
 
 		for (tbl = &arc_legacy_rel[0]; tbl->id != 0; tbl++) {
@@ -143,11 +139,10 @@ static void decode_arc_core(struct cpuinfo_arc *cpu)
 	}
 
 	/*
-	 * However the subsequent HS release (same 0x54) allow HS38 or HS48
-	 * configurations and encode this info in a different BCR.
-	 * The BCR was introduced in 0x54 so can't be read unconditionally.
+	 * Initial HS cores bumped AUX IDENTITY.ARCVER for each release until
+	 * ARCVER 0x54 which introduced AUX MICRO_ARCH_BUILD and subsequent
+	 * releases only update it.
 	 */
-
 	READ_BCR(ARC_REG_MICRO_ARCH_BCR, uarch);
 
 	if (uarch.prod == 4) {
@@ -158,7 +153,7 @@ static void decode_arc_core(struct cpuinfo_arc *cpu)
 		cpu->name = "HS38";
 	}
 
-	for (tbl = &arc_cpu_rel[0]; tbl->id != 0xFF; tbl++) {
+	for (tbl = &arc_hs_ver54_rel[0]; tbl->id != 0xFF; tbl++) {
 		if (uarch.maj == tbl->id) {
 			cpu->release = tbl->str;
 			break;
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 2ac74904a3ce..218bf25b369a 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -41,6 +41,7 @@ config ARM
 	select CPU_PM if SUSPEND || CPU_IDLE
 	select DCACHE_WORD_ACCESS if HAVE_EFFICIENT_UNALIGNED_ACCESS
 	select DMA_DECLARE_COHERENT
+	select DMA_OPS
 	select DMA_REMAP if MMU
 	select EDAC_SUPPORT
 	select EDAC_ATOMIC_SCRUB
@@ -72,7 +73,6 @@ config ARM
 	select HAVE_ARM_SMCCC if CPU_V7
 	select HAVE_EBPF_JIT if !CPU_ENDIAN_BE32
 	select HAVE_CONTEXT_TRACKING
-	select HAVE_COPY_THREAD_TLS
 	select HAVE_C_RECORDMCOUNT
 	select HAVE_DEBUG_KMEMLEAK if !XIP_KERNEL
 	select HAVE_DMA_CONTIGUOUS if MMU
@@ -668,6 +668,8 @@ source "arch/arm/mach-mmp/Kconfig"
 
 source "arch/arm/mach-moxart/Kconfig"
 
+source "arch/arm/mach-mstar/Kconfig"
+
 source "arch/arm/mach-mv78xx0/Kconfig"
 
 source "arch/arm/mach-mvebu/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 59fde2d598d8..e7f4ca060c0f 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -197,6 +197,7 @@ machine-$(CONFIG_ARCH_MXC)		+= imx
 machine-$(CONFIG_ARCH_MEDIATEK)		+= mediatek
 machine-$(CONFIG_ARCH_MILBEAUT)		+= milbeaut
 machine-$(CONFIG_ARCH_MXS)		+= mxs
+machine-$(CONFIG_ARCH_MSTARV7)		+= mstar
 machine-$(CONFIG_ARCH_NOMADIK)		+= nomadik
 machine-$(CONFIG_ARCH_NPCM)		+= npcm
 machine-$(CONFIG_ARCH_NSPIRE)		+= nspire
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index e6a1cac0bfc7..4572db3fa5ae 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -455,6 +455,8 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6dl-pico-hobbit.dtb \
 	imx6dl-pico-nymph.dtb \
 	imx6dl-pico-pi.dtb \
+	imx6dl-prtrvt.dtb \
+	imx6dl-prtvt7.dtb \
 	imx6dl-rex-basic.dtb \
 	imx6dl-riotboard.dtb \
 	imx6dl-sabreauto.dtb \
@@ -543,6 +545,8 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6q-pico-nymph.dtb \
 	imx6q-pico-pi.dtb \
 	imx6q-pistachio.dtb \
+	imx6q-prti6q.dtb \
+	imx6q-prtwd2.dtb \
 	imx6q-rex-pro.dtb \
 	imx6q-sabreauto.dtb \
 	imx6q-sabrelite.dtb \
@@ -592,6 +596,7 @@ dtb-$(CONFIG_SOC_IMX6SX) += \
 	imx6sx-sdb-reva.dtb \
 	imx6sx-sdb-sai.dtb \
 	imx6sx-sdb.dtb \
+	imx6sx-sdb-mqs.dtb \
 	imx6sx-softing-vining-2000.dtb \
 	imx6sx-udoo-neo-basic.dtb \
 	imx6sx-udoo-neo-extended.dtb \
@@ -617,6 +622,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
 	imx6ull-14x14-evk.dtb \
 	imx6ull-colibri-eval-v3.dtb \
 	imx6ull-colibri-wifi-eval-v3.dtb \
+	imx6ull-myir-mys-6ulx-eval.dtb \
 	imx6ull-opos6uldev.dtb \
 	imx6ull-phytec-segin-ff-rdk-nand.dtb \
 	imx6ull-phytec-segin-ff-rdk-emmc.dtb \
@@ -890,6 +896,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
 	qcom-ipq4019-ap.dk07.1-c1.dtb \
 	qcom-ipq4019-ap.dk07.1-c2.dtb \
 	qcom-ipq8064-ap148.dtb \
+	qcom-ipq8064-rb3011.dtb \
 	qcom-msm8660-surf.dtb \
 	qcom-msm8960-cdp.dtb \
 	qcom-msm8974-fairphone-fp2.dtb \
@@ -927,6 +934,7 @@ dtb-$(CONFIG_ARCH_RENESAS) += \
 	r8a73a4-ape6evm.dtb \
 	r8a7740-armadillo800eva.dtb \
 	r8a7742-iwg21d-q7.dtb \
+	r8a7742-iwg21d-q7-dbcm-ca.dtb \
 	r8a7743-iwg20d-q7.dtb \
 	r8a7743-iwg20d-q7-dbcm-ca.dtb \
 	r8a7743-sk-rzg1m.dtb \
@@ -974,6 +982,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \
 	rk3288-popmetal.dtb \
 	rk3288-r89.dtb \
 	rk3288-rock2-square.dtb \
+	rk3288-rock-pi-n8.dtb \
 	rk3288-tinker.dtb \
 	rk3288-tinker-s.dtb \
 	rk3288-veyron-brain.dtb \
@@ -1197,6 +1206,7 @@ dtb-$(CONFIG_MACH_SUNIV) += \
 dtb-$(CONFIG_ARCH_TANGO) += \
 	tango4-vantage-1172.dtb
 dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \
+	tegra20-acer-a500-picasso.dtb \
 	tegra20-harmony.dtb \
 	tegra20-colibri-eval-v3.dtb \
 	tegra20-colibri-iris.dtb \
@@ -1210,6 +1220,9 @@ dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \
 dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += \
 	tegra30-apalis-eval.dtb \
 	tegra30-apalis-v1.1-eval.dtb \
+	tegra30-asus-nexus7-grouper-PM269.dtb \
+	tegra30-asus-nexus7-grouper-E1565.dtb \
+	tegra30-asus-nexus7-tilapia-E1565.dtb \
 	tegra30-beaver.dtb \
 	tegra30-cardhu-a02.dtb \
 	tegra30-cardhu-a04.dtb \
@@ -1342,10 +1355,15 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
 	mt8127-moose.dtb \
 	mt8135-evbp1.dtb
 dtb-$(CONFIG_ARCH_MILBEAUT) += milbeaut-m10v-evb.dtb
+dtb-$(CONFIG_ARCH_MSTARV7) += \
+	infinity-msc313-breadbee_crust.dtb \
+	infinity3-msc313e-breadbee.dtb \
+	mercury5-ssc8336n-midrived08.dtb
 dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
 dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-ast2500-evb.dtb \
 	aspeed-ast2600-evb.dtb \
+	aspeed-bmc-amd-ethanolx.dtb \
 	aspeed-bmc-arm-centriq2400-rep.dtb \
 	aspeed-bmc-arm-stardragon4800-rep2.dtb \
 	aspeed-bmc-facebook-cmm.dtb \
diff --git a/arch/arm/boot/dts/am335x-baltos-ir2110.dts b/arch/arm/boot/dts/am335x-baltos-ir2110.dts
index 386d5f89978e..56915b6d818d 100644
--- a/arch/arm/boot/dts/am335x-baltos-ir2110.dts
+++ b/arch/arm/boot/dts/am335x-baltos-ir2110.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /*
diff --git a/arch/arm/boot/dts/am335x-baltos-ir3220.dts b/arch/arm/boot/dts/am335x-baltos-ir3220.dts
index b0df7256db13..d8d60398d803 100644
--- a/arch/arm/boot/dts/am335x-baltos-ir3220.dts
+++ b/arch/arm/boot/dts/am335x-baltos-ir3220.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /*
diff --git a/arch/arm/boot/dts/am335x-baltos-ir5221.dts b/arch/arm/boot/dts/am335x-baltos-ir5221.dts
index d6aa46e8700e..8096d459b93f 100644
--- a/arch/arm/boot/dts/am335x-baltos-ir5221.dts
+++ b/arch/arm/boot/dts/am335x-baltos-ir5221.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /*
diff --git a/arch/arm/boot/dts/am335x-baltos-leds.dtsi b/arch/arm/boot/dts/am335x-baltos-leds.dtsi
index 4e11a160d88f..9a79f727baf6 100644
--- a/arch/arm/boot/dts/am335x-baltos-leds.dtsi
+++ b/arch/arm/boot/dts/am335x-baltos-leds.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /*
diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi
index 05e7b5d4a95b..b7f64c7ba83d 100644
--- a/arch/arm/boot/dts/am335x-baltos.dtsi
+++ b/arch/arm/boot/dts/am335x-baltos.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /*
@@ -369,7 +369,7 @@
 &mmc2 {
 	status = "okay";
 	vmmc-supply = <&wl12xx_vmmc>;
-	ti,non-removable;
+	non-removable;
 	bus-width = <4>;
 	cap-power-off-card;
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
index 6c9187bc0f17..2d51d4bba6d4 100644
--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 / {
diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
index 43bfbce41049..b5d85ef51a02 100644
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  */
 /dts-v1/;
 
diff --git a/arch/arm/boot/dts/am335x-boneblack-common.dtsi b/arch/arm/boot/dts/am335x-boneblack-common.dtsi
index 91f93bc89716..64c3e9269f40 100644
--- a/arch/arm/boot/dts/am335x-boneblack-common.dtsi
+++ b/arch/arm/boot/dts/am335x-boneblack-common.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 #include <dt-bindings/display/tda998x.h>
@@ -22,6 +22,7 @@
 	pinctrl-0 = <&emmc_pins>;
 	bus-width = <8>;
 	status = "okay";
+	non-removable;
 };
 
 &am33xx_pinmux {
diff --git a/arch/arm/boot/dts/am335x-boneblack-wireless.dts b/arch/arm/boot/dts/am335x-boneblack-wireless.dts
index 3124d94c0b3c..86cad9912906 100644
--- a/arch/arm/boot/dts/am335x-boneblack-wireless.dts
+++ b/arch/arm/boot/dts/am335x-boneblack-wireless.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  */
 /dts-v1/;
 
@@ -75,7 +75,6 @@
 	bus-width = <4>;
 	non-removable;
 	cap-power-off-card;
-	ti,needs-special-hs-handling;
 	keep-power-in-suspend;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc3_pins &wl18xx_pins>;
diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts
index d3928662aed4..b4feb85e171a 100644
--- a/arch/arm/boot/dts/am335x-boneblack.dts
+++ b/arch/arm/boot/dts/am335x-boneblack.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  */
 /dts-v1/;
 
@@ -23,3 +23,147 @@
 		opp-supported-hw = <0x06 0x0100>;
 	};
 };
+
+&gpio0 {
+	gpio-line-names =
+		"[ethernet]",
+		"[ethernet]",
+		"P9_22 [spi0_sclk]",
+		"P9_21 [spi0_d0]",
+		"P9_18 [spi0_d1]",
+		"P9_17 [spi0_cs0]",
+		"[sd card]",
+		"P9_42A [ecappwm0]",
+		"P8_35 [hdmi]",
+		"P8_33 [hdmi]",
+		"P8_31 [hdmi]",
+		"P8_32 [hdmi]",
+		"P9_20 [i2c2_sda]",
+		"P9_19 [i2c2_scl]",
+		"P9_26 [uart1_rxd]",
+		"P9_24 [uart1_txd]",
+		"[ethernet]",
+		"[ethernet]",
+		"[usb]",
+		"[hdmi]",
+		"P9_41B",
+		"[ethernet]",
+		"P8_19 [ehrpwm2a]",
+		"P8_13 [ehrpwm2b]",
+		"[NC]",
+		"[NC]",
+		"P8_14",
+		"P8_17",
+		"[ethernet]",
+		"[ethernet]",
+		"P9_11 [uart4_rxd]",
+		"P9_13 [uart4_txd]";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"P8_25 [emmc]",
+		"[emmc]",
+		"P8_5 [emmc]",
+		"P8_6 [emmc]",
+		"P8_23 [emmc]",
+		"P8_22 [emmc]",
+		"P8_3 [emmc]",
+		"P8_4 [emmc]",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"P8_12",
+		"P8_11",
+		"P8_16",
+		"P8_15",
+		"P9_15A",
+		"P9_23",
+		"P9_14 [ehrpwm1a]",
+		"P9_16 [ehrpwm1b]",
+		"[emmc]",
+		"[usr0 led]",
+		"[usr1 led]",
+		"[usr2 led]",
+		"[usr3 led]",
+		"[hdmi]",
+		"[usb]",
+		"[hdmi audio]",
+		"P9_12",
+		"P8_26",
+		"P8_21 [emmc]",
+		"P8_20 [emmc]";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"P9_15B",
+		"P8_18",
+		"P8_7",
+		"P8_8",
+		"P8_10",
+		"P8_9",
+		"P8_45 [hdmi]",
+		"P8_46 [hdmi]",
+		"P8_43 [hdmi]",
+		"P8_44 [hdmi]",
+		"P8_41 [hdmi]",
+		"P8_42 [hdmi]",
+		"P8_39 [hdmi]",
+		"P8_40 [hdmi]",
+		"P8_37 [hdmi]",
+		"P8_38 [hdmi]",
+		"P8_36 [hdmi]",
+		"P8_34 [hdmi]",
+		"[ethernet]",
+		"[ethernet]",
+		"[ethernet]",
+		"[ethernet]",
+		"P8_27 [hdmi]",
+		"P8_29 [hdmi]",
+		"P8_28 [hdmi]",
+		"P8_30 [hdmi]",
+		"[emmc]",
+		"[emmc]",
+		"[emmc]",
+		"[emmc]",
+		"[emmc]",
+		"[emmc]";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"[ethernet]",
+		"[ethernet]",
+		"[ethernet]",
+		"[ethernet]",
+		"[ethernet]",
+		"[i2c0]",
+		"[i2c0]",
+		"[emu]",
+		"[emu]",
+		"[ethernet]",
+		"[ethernet]",
+		"[NC]",
+		"[NC]",
+		"[usb]",
+		"P9_31 [spi1_sclk]",
+		"P9_29 [spi1_d0]",
+		"P9_30 [spi1_d1]",
+		"P9_28 [spi1_cs0]",
+		"P9_42B [ecappwm0]",
+		"P9_27",
+		"P9_41A",
+		"P9_25",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"[NC]";
+};
diff --git a/arch/arm/boot/dts/am335x-boneblue.dts b/arch/arm/boot/dts/am335x-boneblue.dts
index 5811fb8d4fdf..c696d57cf364 100644
--- a/arch/arm/boot/dts/am335x-boneblue.dts
+++ b/arch/arm/boot/dts/am335x-boneblue.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  */
 /dts-v1/;
 
@@ -367,7 +367,6 @@
 	bus-width = <4>;
 	non-removable;
 	cap-power-off-card;
-	ti,needs-special-hs-handling;
 	keep-power-in-suspend;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc3_pins &wl18xx_pins>;
diff --git a/arch/arm/boot/dts/am335x-bonegreen-common.dtsi b/arch/arm/boot/dts/am335x-bonegreen-common.dtsi
index 7a8826633cef..9f7fb63744d0 100644
--- a/arch/arm/boot/dts/am335x-bonegreen-common.dtsi
+++ b/arch/arm/boot/dts/am335x-bonegreen-common.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 &ldo3_reg {
diff --git a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts
index 4092cd193b8a..7615327d906a 100644
--- a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts
+++ b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  */
 /dts-v1/;
 
@@ -75,7 +75,6 @@
 	bus-width = <4>;
 	non-removable;
 	cap-power-off-card;
-	ti,needs-special-hs-handling;
 	keep-power-in-suspend;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc3_pins &wl18xx_pins>;
diff --git a/arch/arm/boot/dts/am335x-bonegreen.dts b/arch/arm/boot/dts/am335x-bonegreen.dts
index c12bb0717779..18cc0f49e999 100644
--- a/arch/arm/boot/dts/am335x-bonegreen.dts
+++ b/arch/arm/boot/dts/am335x-bonegreen.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  */
 /dts-v1/;
 
diff --git a/arch/arm/boot/dts/am335x-chiliboard.dts b/arch/arm/boot/dts/am335x-chiliboard.dts
index b14a2759c69b..5660b5f6942d 100644
--- a/arch/arm/boot/dts/am335x-chiliboard.dts
+++ b/arch/arm/boot/dts/am335x-chiliboard.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2015 Jablotron s.r.o. -- http://www.jablotron.com/
+ * Copyright (C) 2015 Jablotron s.r.o. -- https://www.jablotron.com/
  * Author: Rostislav Lisovy <lisovy@jablotron.cz>
  */
 /dts-v1/;
diff --git a/arch/arm/boot/dts/am335x-chilisom.dtsi b/arch/arm/boot/dts/am335x-chilisom.dtsi
index b31e2f7a4ad9..43b61e43ed1e 100644
--- a/arch/arm/boot/dts/am335x-chilisom.dtsi
+++ b/arch/arm/boot/dts/am335x-chilisom.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2015 Jablotron s.r.o. -- http://www.jablotron.com/
+ * Copyright (C) 2015 Jablotron s.r.o. -- https://www.jablotron.com/
  * Author: Rostislav Lisovy <lisovy@jablotron.cz>
  */
 #include "am33xx.dtsi"
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 68252dab32c3..12dffccd1ffd 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  */
 /dts-v1/;
 
@@ -743,8 +743,7 @@
 	bus-width = <4>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc3_pins &wlan_pins>;
-	ti,non-removable;
-	ti,needs-special-hs-handling;
+	non-removable;
 	cap-power-off-card;
 	keep-power-in-suspend;
 
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index 32f515a295ee..b43b94122d3c 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /*
@@ -655,7 +655,7 @@
 &mmc2 {
 	status = "okay";
 	vmmc-supply = <&wl12xx_vmmc>;
-	ti,non-removable;
+	non-removable;
 	bus-width = <4>;
 	cap-power-off-card;
 	keep-power-in-suspend;
diff --git a/arch/arm/boot/dts/am335x-guardian.dts b/arch/arm/boot/dts/am335x-guardian.dts
index 0ebe9e2c150e..1918766c1f80 100644
--- a/arch/arm/boot/dts/am335x-guardian.dts
+++ b/arch/arm/boot/dts/am335x-guardian.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  * Copyright (C) 2018 Robert Bosch Power Tools GmbH
  */
 /dts-v1/;
diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts
index 021eb57261fe..b958ab56a412 100644
--- a/arch/arm/boot/dts/am335x-icev2.dts
+++ b/arch/arm/boot/dts/am335x-icev2.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /*
diff --git a/arch/arm/boot/dts/am335x-lxm.dts b/arch/arm/boot/dts/am335x-lxm.dts
index fef582852820..cd55f11260ea 100644
--- a/arch/arm/boot/dts/am335x-lxm.dts
+++ b/arch/arm/boot/dts/am335x-lxm.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2014 NovaTech LLC - http://www.novatechweb.com
+ * Copyright (C) 2014 NovaTech LLC - https://www.novatechweb.com
  */
 /dts-v1/;
 
@@ -339,7 +339,7 @@
 	pinctrl-0 = <&emmc_pins>;
 	vmmc-supply = <&vmmcsd_fixed>;
 	bus-width = <8>;
-	ti,non-removable;
+	non-removable;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
index 6495a125c01f..4e90f9c23d2e 100644
--- a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
+++ b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
@@ -159,7 +159,7 @@
 	vmmc-supply = <&vmmcsd_fixed>;
 	bus-width = <8>;
 	pinctrl-0 = <&mmc1_pins_default>;
-	ti,non-removable;
+	non-removable;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts b/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts
index 244df9c5a537..f03e72cada41 100644
--- a/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts
+++ b/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts
@@ -451,7 +451,7 @@
 	vmmc-supply = <&vmmcsd_fixed>;
 	bus-width = <8>;
 	pinctrl-0 = <&mmc2_pins_default>;
-	ti,non-removable;
+	non-removable;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts b/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts
index 1e4dbc85c120..8303b832aa50 100644
--- a/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts
+++ b/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /*
diff --git a/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts b/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts
index 9a6cd8ef821f..f8e0e95a751f 100644
--- a/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts
+++ b/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /*
diff --git a/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts b/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts
index 2298563f7334..a4e137527215 100644
--- a/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts
+++ b/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /*
diff --git a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts
index 1d2902083483..f841afb27844 100644
--- a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts
+++ b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts
@@ -1,5 +1,5 @@
 //SPDX-License-Identifier: GPL-2.0
-/* Copyright (C) 2018 Octavo Systems LLC - http://www.octavosystems.com/
+/* Copyright (C) 2018 Octavo Systems LLC - https://www.octavosystems.com/
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -107,7 +107,7 @@
 	 * below to "crossed" and uncomment the video-ports -property
 	 * in tda19988 node.
 	 * AM335x errata for wiring:
-	 * http://www.ti.com/lit/er/sprz360i/sprz360i.pdf
+	 * https://www.ti.com/lit/er/sprz360i/sprz360i.pdf
 	 */
 
 	blue-and-red-wiring = "straight";
diff --git a/arch/arm/boot/dts/am335x-osd335x-common.dtsi b/arch/arm/boot/dts/am335x-osd335x-common.dtsi
index a8b6842489f7..2888b15999ee 100644
--- a/arch/arm/boot/dts/am335x-osd335x-common.dtsi
+++ b/arch/arm/boot/dts/am335x-osd335x-common.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  *
  * Author: Robert Nelson <robertcnelson@gmail.com>
  */
diff --git a/arch/arm/boot/dts/am335x-pdu001.dts b/arch/arm/boot/dts/am335x-pdu001.dts
index e4dcfa087a1b..d41a5ffd83cf 100644
--- a/arch/arm/boot/dts/am335x-pdu001.dts
+++ b/arch/arm/boot/dts/am335x-pdu001.dts
@@ -5,7 +5,7 @@
  *
  * Copyright (C) 2018 EETS GmbH - http://www.eets.ch/
  *
- * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
+ * Copyright (C) 2011, Texas Instruments, Incorporated - https://www.ti.com/
  *
  * SPDX-License-Identifier:  GPL-2.0+
  */
diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts
index 6d7608d9377b..f9a027b47962 100644
--- a/arch/arm/boot/dts/am335x-pepper.dts
+++ b/arch/arm/boot/dts/am335x-pepper.dts
@@ -341,7 +341,7 @@
 	pinctrl-0 = <&emmc_pins>;
 	vmmc-supply = <&ldo3_reg>;
 	bus-width = <8>;
-	ti,non-removable;
+	non-removable;
 };
 
 &mmc3 {
@@ -351,7 +351,7 @@
 	pinctrl-0 = <&wireless_pins>;
 	vmmmc-supply = <&v3v3c_reg>;
 	bus-width = <4>;
-	ti,non-removable;
+	non-removable;
 	dmas = <&edma_xbar 12 0 1
 		&edma_xbar 13 0 2>;
 	dma-names = "tx", "rx";
diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi
index 3d0672b53d77..7e46b4c02709 100644
--- a/arch/arm/boot/dts/am335x-phycore-som.dtsi
+++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi
@@ -69,7 +69,7 @@
 	pinctrl-0 = <&emmc_pins>;
 	vmmc-supply = <&vmmc_reg>;
 	bus-width = <8>;
-	ti,non-removable;
+	non-removable;
 	status = "disabled";
 };
 
diff --git a/arch/arm/boot/dts/am335x-pocketbeagle.dts b/arch/arm/boot/dts/am335x-pocketbeagle.dts
index 4da719098028..d526c5941c9b 100644
--- a/arch/arm/boot/dts/am335x-pocketbeagle.dts
+++ b/arch/arm/boot/dts/am335x-pocketbeagle.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  *
  * Author: Robert Nelson <robertcnelson@gmail.com>
  */
@@ -59,7 +59,276 @@
 	};
 };
 
+&gpio0 {
+	gpio-line-names =
+		"[NC]",
+		"[NC]",
+		"P1.08 [SPI0_CLK]",
+		"P1.10 [SPI0_MISO]",
+		"P1.12 [SPI0_MOSI]",
+		"P1.06 [SPI0_CS]",
+		"[MMC0_CD]",
+		"P2.29 [SPI1_CLK]",
+		"[SYSBOOT]",
+		"[SYSBOOT]",
+		"[SYSBOOT]",
+		"[SYSBOOT]",
+		"P1.26 [I2C2_SDA]",
+		"P1.28 [I2C2_SCL]",
+		"P2.11 [I2C1_SDA]",
+		"P2.09 [I2C1_SCL]",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"P2.31 [SPI1_CS]",
+		"P1.20 [PRU0.16]",
+		"[NC]",
+		"[NC]",
+		"P2.03",
+		"[NC]",
+		"[NC]",
+		"P1.34",
+		"P2.19",
+		"[NC]",
+		"[NC]",
+		"P2.05 [UART4_RX]",
+		"P2.07 [UART4_TX]";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"P2.25 [SPI1_MOSI]",
+		"P1.32 [UART0_RX]",
+		"P1.30 [UART0_TX]",
+		"P2.24",
+		"P2.33",
+		"P2.22",
+		"P2.18",
+		"[NC]",
+		"[NC]",
+		"P2.01 [PWM1A]",
+		"[NC]",
+		"P2.10",
+		"[USR LED 0]",
+		"[USR LED 1]",
+		"[USR LED 2]",
+		"[USR LED 3]",
+		"P2.06",
+		"P2.04",
+		"P2.02",
+		"P2.08",
+		"[NC]",
+		"[NC]",
+		"[NC]";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"P2.20",
+		"P2.17",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"[EEPROM_WP]",
+		"[SYSBOOT]",
+		"[SYSBOOT]",
+		"[SYSBOOT]",
+		"[SYSBOOT]",
+		"[SYSBOOT]",
+		"[SYSBOOT]",
+		"[SYSBOOT]",
+		"[SYSBOOT]",
+		"[SYSBOOT]",
+		"[SYSBOOT]",
+		"[SYSBOOT]",
+		"[SYSBOOT]",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"P2.35 [AIN5]",
+		"P1.02 [AIN6]",
+		"P1.35 [PRU1.10]",
+		"P1.04 [PRU1.11]",
+		"[MMC0_DAT3]",
+		"[MMC0_DAT2]",
+		"[MMC0_DAT1]",
+		"[MMC0_DAT0]",
+		"[MMC0_CLK]",
+		"[MMC0_CMD]";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"[I2C0_SDA]",
+		"[I2C0_SCL]",
+		"[JTAG]",
+		"[JTAG]",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"P1.03 [USB1]",
+		"P1.36 [PWM0A]",
+		"P1.33 [PRU0.1]",
+		"P2.32 [PRU0.2]",
+		"P2.30 [PRU0.3]",
+		"P1.31 [PRU0.4]",
+		"P2.34 [PRU0.5]",
+		"P2.28 [PRU0.6]",
+		"P1.29 [PRU0.7]",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"[NC]",
+		"[NC]";
+};
+
 &am33xx_pinmux {
+
+	pinctrl-names = "default";
+
+	pinctrl-0 =   < &P2_03_gpio &P1_34_gpio &P2_19_gpio &P2_24_gpio
+			&P2_33_gpio &P2_22_gpio &P2_18_gpio &P2_10_gpio
+			&P2_06_gpio &P2_04_gpio &P2_02_gpio &P2_08_gpio
+			&P2_17_gpio >;
+
+	/* P2_03 (ZCZ ball T10) gpio0_23 0x824 PIN 9 */
+	P2_03_gpio: pinmux_P2_03_gpio {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLUP, MUX_MODE7)
+		>;
+		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
+		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
+	};
+
+	/* P1_34 (ZCZ ball T11) gpio0_26 0x828 PIN 10 */
+	P1_34_gpio: pinmux_P1_34_gpio {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT_PULLUP, MUX_MODE7)
+		>;
+		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
+		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
+	};
+
+	/* P2_19 (ZCZ ball U12) gpio0_27 0x82c PIN 11 */
+	P2_19_gpio: pinmux_P2_19_gpio {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLUP, MUX_MODE7)
+		>;
+		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
+		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
+	};
+
+	/* P2_24 (ZCZ ball T12) gpio1_12 0x830 PIN 12 */
+	P2_24_gpio: pinmux_P2_24_gpio {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE7)
+		>;
+		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
+		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
+	};
+
+	/* P2_33 (ZCZ ball R12) gpio1_13 0x834 PIN 13 */
+	P2_33_gpio: pinmux_P2_33_gpio {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE7)
+		>;
+		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
+		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
+	};
+
+	/* P2_22 (ZCZ ball V13) gpio1_14 0x838 PIN 14 */
+	P2_22_gpio: pinmux_P2_22_gpio {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE7)
+		>;
+		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
+		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
+	};
+
+	/* P2_18 (ZCZ ball U13) gpio1_15 0x83c PIN 15 */
+	P2_18_gpio: pinmux_P2_18_gpio {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE7)
+		>;
+		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
+		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
+	};
+
+	/* P2_10 (ZCZ ball R14) gpio1_20 0x850 PIN 20 */
+	P2_10_gpio: pinmux_P2_10_gpio {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_INPUT_PULLUP, MUX_MODE7)
+		>;
+		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
+		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
+	};
+
+	/* P2_06 (ZCZ ball U16) gpio1_25 0x864 PIN 25 */
+	P2_06_gpio: pinmux_P2_06_gpio {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLUP, MUX_MODE7)
+		>;
+		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
+		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
+	};
+
+	/* P2_04 (ZCZ ball T16) gpio1_26 0x868 PIN 26 */
+	P2_04_gpio: pinmux_P2_04_gpio {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLUP, MUX_MODE7)
+		>;
+		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
+		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
+	};
+
+	/* P2_02 (ZCZ ball V17) gpio1_27 0x86c PIN 27 */
+	P2_02_gpio: pinmux_P2_02_gpio {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLUP, MUX_MODE7)
+		>;
+		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
+		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
+	};
+
+	/* P2_08 (ZCZ ball U18) gpio1_28 0x878 PIN 30 */
+	P2_08_gpio: pinmux_P2_08_gpio {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+		pinctrl-single,bias-pullup   =   < 0x00  0x10  0x00  0x18>;
+		pinctrl-single,bias-pulldown   = < 0x00  0x00  0x10  0x18>;
+	};
+
+	/* P2_17 (ZCZ ball V12) gpio2_1 0x88c PIN 35 */
+	P2_17_gpio: pinmux_P2_17_gpio {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE7)
+		>;
+		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
+		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
+	};
+
 	i2c2_pins: pinmux-i2c2-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLUP, MUX_MODE3)	/* (D17) uart1_rtsn.I2C2_SCL */
@@ -88,7 +357,6 @@
 			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT, MUX_MODE4)		/* (B12) mcasp0_aclkr.mmc0_sdwp */
 		>;
 	};
 
diff --git a/arch/arm/boot/dts/am335x-sancloud-bbe.dts b/arch/arm/boot/dts/am335x-sancloud-bbe.dts
index e5fdb7abb0d5..275ba339adf4 100644
--- a/arch/arm/boot/dts/am335x-sancloud-bbe.dts
+++ b/arch/arm/boot/dts/am335x-sancloud-bbe.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  */
 /dts-v1/;
 
diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi
index 7ff11d6bf0f2..45de2ff6a777 100644
--- a/arch/arm/boot/dts/am33xx-l4.dtsi
+++ b/arch/arm/boot/dts/am33xx-l4.dtsi
@@ -151,6 +151,18 @@
 
 			gpio0: gpio@0 {
 				compatible = "ti,omap4-gpio";
+				gpio-ranges =	<&am33xx_pinmux  0  82 8>,
+						<&am33xx_pinmux  8  52 4>,
+						<&am33xx_pinmux 12  94 4>,
+						<&am33xx_pinmux 16  71 2>,
+						<&am33xx_pinmux 18 135 1>,
+						<&am33xx_pinmux 19 108 2>,
+						<&am33xx_pinmux 21  73 1>,
+						<&am33xx_pinmux 22   8 2>,
+						<&am33xx_pinmux 26  10 2>,
+						<&am33xx_pinmux 28  74 1>,
+						<&am33xx_pinmux 29  81 1>,
+						<&am33xx_pinmux 30  28 2>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -1296,6 +1308,10 @@
 
 			gpio1: gpio@0 {
 				compatible = "ti,omap4-gpio";
+				gpio-ranges =   <&am33xx_pinmux  0  0  8>,
+						<&am33xx_pinmux  8 90  4>,
+						<&am33xx_pinmux 12 12 16>,
+						<&am33xx_pinmux 28 30  4>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -1335,10 +1351,8 @@
 			ranges = <0x0 0x60000 0x1000>;
 
 			mmc1: mmc@0 {
-				compatible = "ti,omap4-hsmmc";
-				ti,dual-volt;
+				compatible = "ti,am335-sdhci";
 				ti,needs-special-reset;
-				ti,needs-special-hs-handling;
 				dmas = <&edma_xbar 24 0 0
 					&edma_xbar 25 0 0>;
 				dma-names = "tx", "rx";
@@ -1698,6 +1712,9 @@
 
 			gpio2: gpio@0 {
 				compatible = "ti,omap4-gpio";
+                                gpio-ranges =	<&am33xx_pinmux  0 34 18>,
+						<&am33xx_pinmux 18 77  4>,
+						<&am33xx_pinmux 22 56 10>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -1731,6 +1748,11 @@
 
 			gpio3: gpio@0 {
 				compatible = "ti,omap4-gpio";
+				gpio-ranges =	<&am33xx_pinmux  0  66 5>,
+						<&am33xx_pinmux  5  98 2>,
+						<&am33xx_pinmux  7  75 2>,
+						<&am33xx_pinmux 13 141 1>,
+						<&am33xx_pinmux 14 100 8>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -1816,7 +1838,7 @@
 			ranges = <0x0 0xd8000 0x1000>;
 
 			mmc2: mmc@0 {
-				compatible = "ti,omap4-hsmmc";
+				compatible = "ti,am335-sdhci";
 				ti,needs-special-reset;
 				dmas = <&edma 2 0
 					&edma 3 0>;
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 3b177c9c4412..5cb4cc37cb6d 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -1,7 +1,7 @@
 /*
  * Device Tree Source for AM33XX SoC
  *
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2.  This program is licensed "as is" without any warranty of any
@@ -322,10 +322,11 @@
 			ranges = <0x0 0x47810000 0x1000>;
 
 			mmc3: mmc@0 {
-				compatible = "ti,omap4-hsmmc";
+				compatible = "ti,am335-sdhci";
 				ti,needs-special-reset;
 				interrupts = <29>;
 				reg = <0x0 0x1000>;
+				status = "disabled";
 			};
 		};
 
@@ -335,7 +336,7 @@
 			      <0x47400010 0x4>;
 			reg-names = "rev", "sysc";
 			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP2_SOFTRESET)>;
+					 SYSC_OMAP4_SOFTRESET)>;
 			ti,sysc-midle = <SYSC_IDLE_FORCE>,
 					<SYSC_IDLE_NO>,
 					<SYSC_IDLE_SMART>;
@@ -347,7 +348,7 @@
 			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <0x0 0x47400000 0x5000>;
+			ranges = <0x0 0x47400000 0x8000>;
 
 			usb0_phy: usb-phy@1300 {
 				compatible = "ti,am335x-usb-phy";
diff --git a/arch/arm/boot/dts/am3517-craneboard.dts b/arch/arm/boot/dts/am3517-craneboard.dts
index eb3517dabee1..3642cfc80194 100644
--- a/arch/arm/boot/dts/am3517-craneboard.dts
+++ b/arch/arm/boot/dts/am3517-craneboard.dts
@@ -2,7 +2,7 @@
 /*
  * See craneboard.org for more details
  *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
  */
 /dts-v1/;
 
diff --git a/arch/arm/boot/dts/am3517-evm-ui.dtsi b/arch/arm/boot/dts/am3517-evm-ui.dtsi
index 48631a45da51..250c40da2535 100644
--- a/arch/arm/boot/dts/am3517-evm-ui.dtsi
+++ b/arch/arm/boot/dts/am3517-evm-ui.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2018 Logic PD, Inc - http://www.logicpd.com/
+ * Copyright (C) 2018 Logic PD, Inc - https://www.logicpd.com/
  */
 
 #include <dt-bindings/input/input.h>
diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts
index 92466b9eb6ba..04f20e7680b1 100644
--- a/arch/arm/boot/dts/am3517-evm.dts
+++ b/arch/arm/boot/dts/am3517-evm.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
  */
 /dts-v1/;
 
diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi
index dc8927f14b6c..de33c4f89f33 100644
--- a/arch/arm/boot/dts/am3517.dtsi
+++ b/arch/arm/boot/dts/am3517.dtsi
@@ -1,7 +1,7 @@
 /*
  * Device Tree Source for am3517 SoC
  *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2.  This program is licensed "as is" without any warranty of any
@@ -10,6 +10,10 @@
 
 #include "omap3.dtsi"
 
+/* AM3517 doesn't appear to have the crypto engines defined in omap3.dtsi */
+/delete-node/ &aes1_target;
+/delete-node/ &aes2_target;
+
 / {
 	aliases {
 		serial3 = &uart4;
diff --git a/arch/arm/boot/dts/am3874-iceboard.dts b/arch/arm/boot/dts/am3874-iceboard.dts
index 1b4b2b0500e4..1bb57019d082 100644
--- a/arch/arm/boot/dts/am3874-iceboard.dts
+++ b/arch/arm/boot/dts/am3874-iceboard.dts
@@ -2,8 +2,8 @@
 /*
  * Device tree for Winterland IceBoard
  *
- * http://mcgillcosmology.com
- * http://threespeedlogic.com
+ * https://mcgillcosmology.com
+ * https://threespeedlogic.com
  *
  * This is an ARM + FPGA instrumentation board used at telescopes in
  * Antarctica (the South Pole Telescope), Chile (POLARBEAR), and at the DRAO
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index b4861f70f178..14314046256c 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -1,7 +1,7 @@
 /*
  * Device Tree Source for AM4372 SoC
  *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2.  This program is licensed "as is" without any warranty of any
@@ -153,7 +153,7 @@
 		clocks = <&mpu_periphclk>;
 	};
 
-	l2-cache-controller@48242000 {
+	cache-controller@48242000 {
 		compatible = "arm,pl310-cache";
 		reg = <0x48242000 0x1000>;
 		cache-unified;
@@ -316,10 +316,11 @@
 			ranges = <0x0 0x47810000 0x1000>;
 
 			mmc3: mmc@0 {
-				compatible = "ti,omap4-hsmmc";
+				compatible = "ti,am437-sdhci";
 				ti,needs-special-reset;
 				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x0 0x1000>;
+				status = "disabled";
 			};
 		};
 
diff --git a/arch/arm/boot/dts/am437x-cm-t43.dts b/arch/arm/boot/dts/am437x-cm-t43.dts
index 063113a5da2d..a6b4fca8626a 100644
--- a/arch/arm/boot/dts/am437x-cm-t43.dts
+++ b/arch/arm/boot/dts/am437x-cm-t43.dts
@@ -291,7 +291,7 @@
 	pinctrl-0 = <&emmc_pins>;
 	vmmc-supply = <&vmmc_3v3>;
 	bus-width = <8>;
-	ti,non-removable;
+	non-removable;
 };
 
 &spi0 {
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index d692e3b2812a..b28e5c8cd02a 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /* AM437x GP EVM */
@@ -91,22 +91,6 @@
 
 		backlight = <&lcd_bl>;
 
-		panel-timing {
-			clock-frequency = <33000000>;
-			hactive = <800>;
-			vactive = <480>;
-			hfront-porch = <210>;
-			hback-porch = <16>;
-			hsync-len = <30>;
-			vback-porch = <10>;
-			vfront-porch = <22>;
-			vsync-len = <13>;
-			hsync-active = <0>;
-			vsync-active = <0>;
-			de-active = <1>;
-			pixelclk-active = <1>;
-		};
-
 		port {
 			lcd_in: endpoint {
 				remote-endpoint = <&dpi_out>;
@@ -869,7 +853,7 @@
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&emmc_pins_default>;
 	pinctrl-1 = <&emmc_pins_sleep>;
-	ti,non-removable;
+	non-removable;
 };
 
 &mmc3 {
@@ -886,7 +870,7 @@
 	pinctrl-1 = <&mmc3_pins_sleep>;
 	cap-power-off-card;
 	keep-power-in-suspend;
-	ti,non-removable;
+	non-removable;
 
 	#address-cells = <1>;
 	#size-cells = <0>;
diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts
index a958f9ee4a5a..8b986c45f09d 100644
--- a/arch/arm/boot/dts/am437x-idk-evm.dts
+++ b/arch/arm/boot/dts/am437x-idk-evm.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2014 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/am437x-l4.dtsi
index 0d0f9fe4a882..3d393fe252c6 100644
--- a/arch/arm/boot/dts/am437x-l4.dtsi
+++ b/arch/arm/boot/dts/am437x-l4.dtsi
@@ -1083,9 +1083,8 @@
 			ranges = <0x0 0x60000 0x1000>;
 
 			mmc1: mmc@0 {
-				compatible = "ti,omap4-hsmmc";
+				compatible = "ti,am437-sdhci";
 				reg = <0x0 0x1000>;
-				ti,dual-volt;
 				ti,needs-special-reset;
 				dmas = <&edma 24 0>,
 					<&edma 25 0>;
@@ -1541,8 +1540,9 @@
 			reg = <0xcc020 0x4>;
 			reg-names = "rev";
 			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN0_CLKCTRL 0>;
-			clock-names = "fck";
+			clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN0_CLKCTRL 0>,
+			<&dcan0_fck>;
+			clock-names = "fck", "osc";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0xcc000 0x2000>;
@@ -1550,6 +1550,8 @@
 			dcan0: can@0 {
 				compatible = "ti,am4372-d_can", "ti,am3352-d_can";
 				reg = <0x0 0x2000>;
+				clocks = <&dcan0_fck>;
+				clock-names = "fck";
 				syscon-raminit = <&scm_conf 0x644 0>;
 				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
@@ -1561,8 +1563,9 @@
 			reg = <0xd0020 0x4>;
 			reg-names = "rev";
 			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
-			clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN1_CLKCTRL 0>;
-			clock-names = "fck";
+			clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN1_CLKCTRL 0>,
+			<&dcan1_fck>;
+			clock-names = "fck", "osc";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0xd0000 0x2000>;
@@ -1570,6 +1573,8 @@
 			dcan1: can@0 {
 				compatible = "ti,am4372-d_can", "ti,am3352-d_can";
 				reg = <0x0 0x2000>;
+				clocks = <&dcan1_fck>;
+				clock-name = "fck";
 				syscon-raminit = <&scm_conf 0x644 1>;
 				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
@@ -1598,7 +1603,7 @@
 			ranges = <0x0 0xd8000 0x1000>;
 
 			mmc2: mmc@0 {
-				compatible = "ti,omap4-hsmmc";
+				compatible = "ti,am437-sdhci";
 				reg = <0x0 0x1000>;
 				ti,needs-special-reset;
 				dmas = <&edma 2 0>,
@@ -2352,7 +2357,6 @@
 
 		target-module@80000 {			/* 0x48380000, ap 123 42.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "usb_otg_ss0";
 			reg = <0x80000 0x4>,
 			      <0x80010 0x4>;
 			reg-names = "rev", "sysc";
@@ -2433,7 +2437,6 @@
 
 		target-module@c0000 {			/* 0x483c0000, ap 127 7a.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "usb_otg_ss1";
 			reg = <0xc0000 0x4>,
 			      <0xc0010 0x4>;
 			reg-names = "rev", "sysc";
diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
index 4d5a7ca2e25d..5fffdce853b1 100644
--- a/arch/arm/boot/dts/am437x-sk-evm.dts
+++ b/arch/arm/boot/dts/am437x-sk-evm.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2014 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /* AM437x SK EVM */
@@ -134,22 +134,6 @@
 
 		enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 
-		panel-timing {
-			clock-frequency = <9000000>;
-			hactive = <480>;
-			vactive = <272>;
-			hfront-porch = <2>;
-			hback-porch = <2>;
-			hsync-len = <41>;
-			vfront-porch = <2>;
-			vback-porch = <2>;
-			vsync-len = <10>;
-			hsync-active = <0>;
-			vsync-active = <0>;
-			de-active = <1>;
-			pixelclk-active = <1>;
-		};
-
 		port {
 			lcd_in: endpoint {
 				remote-endpoint = <&dpi_out>;
@@ -719,7 +703,7 @@
 	pinctrl-1 = <&mmc3_pins_sleep>;
 	cap-power-off-card;
 	keep-power-in-suspend;
-	ti,non-removable;
+	non-removable;
 
 	#address-cells = <1>;
 	#size-cells = <0>;
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index 27259fd6f741..de4fc78498a0 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /* AM43x EPOS EVM */
@@ -47,22 +47,6 @@
 
 		backlight = <&lcd_bl>;
 
-		panel-timing {
-			clock-frequency = <33000000>;
-			hactive = <800>;
-			vactive = <480>;
-			hfront-porch = <210>;
-			hback-porch = <16>;
-			hsync-len = <30>;
-			vback-porch = <10>;
-			vfront-porch = <22>;
-			vsync-len = <13>;
-			hsync-active = <0>;
-			vsync-active = <0>;
-			de-active = <1>;
-			pixelclk-active = <1>;
-		};
-
 		port {
 			lcd_in: endpoint {
 				remote-endpoint = <&dpi_out>;
diff --git a/arch/arm/boot/dts/am57-pruss.dtsi b/arch/arm/boot/dts/am57-pruss.dtsi
index b1c583dee10b..032c1acfcda3 100644
--- a/arch/arm/boot/dts/am57-pruss.dtsi
+++ b/arch/arm/boot/dts/am57-pruss.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
  *
  * Common PRUSS data for TI AM57xx platforms
  */
diff --git a/arch/arm/boot/dts/am5718.dtsi b/arch/arm/boot/dts/am5718.dtsi
index a80c2e3eee2e..ebf4d3cc1cfb 100644
--- a/arch/arm/boot/dts/am5718.dtsi
+++ b/arch/arm/boot/dts/am5718.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 #include "dra72x.dtsi"
diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts
index 99a408a2ec6a..391a92e24472 100644
--- a/arch/arm/boot/dts/am571x-idk.dts
+++ b/arch/arm/boot/dts/am571x-idk.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2015-2016 Texas Instruments Incorporated - https://www.ti.com/
  */
 /dts-v1/;
 
diff --git a/arch/arm/boot/dts/am5728.dtsi b/arch/arm/boot/dts/am5728.dtsi
index 9a3810f5adcc..5e0bdf16d485 100644
--- a/arch/arm/boot/dts/am5728.dtsi
+++ b/arch/arm/boot/dts/am5728.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 #include "dra74x.dtsi"
diff --git a/arch/arm/boot/dts/am5729-beagleboneai.dts b/arch/arm/boot/dts/am5729-beagleboneai.dts
index 9877d7709d41..e9c7f44126e7 100644
--- a/arch/arm/boot/dts/am5729-beagleboneai.dts
+++ b/arch/arm/boot/dts/am5729-beagleboneai.dts
@@ -8,6 +8,7 @@
 #include "dra74x.dtsi"
 #include "am57xx-commercial-grade.dtsi"
 #include "dra74x-mmc-iodelay.dtsi"
+#include "dra74-ipu-dsp-common.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/dra.h>
@@ -505,7 +506,7 @@
 
 &cpsw_emac0 {
 	phy-handle = <&phy0>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-rxid";
 };
 
 &ocp {
@@ -629,58 +630,6 @@
 	status = "okay";
 };
 
-&mailbox1 {
-	status = "okay";
-};
-
-&mailbox2 {
-	status = "okay";
-};
-
-&mailbox3 {
-	status = "okay";
-};
-
-&mailbox4 {
-	status = "okay";
-};
-
-&mailbox5 {
-	status = "okay";
-};
-
-&mailbox6 {
-	status = "okay";
-};
-
-&mailbox7 {
-	status = "okay";
-};
-
-&mailbox8 {
-	status = "okay";
-};
-
-&mailbox9 {
-	status = "okay";
-};
-
-&mailbox10 {
-	status = "okay";
-};
-
-&mailbox11 {
-	status = "okay";
-};
-
-&mailbox12 {
-	status = "okay";
-};
-
-&mailbox13 {
-	status = "okay";
-};
-
 &cpu_alert0 {
 	temperature = <55000>; /* milliCelsius */
 };
@@ -729,3 +678,23 @@
 		opp-shared;
 	};
 };
+
+&ipu2 {
+	status = "okay";
+	memory-region = <&ipu2_memory_region>;
+};
+
+&ipu1 {
+	status = "okay";
+	memory-region = <&ipu1_memory_region>;
+};
+
+&dsp1 {
+	status = "okay";
+	memory-region = <&dsp1_memory_region>;
+};
+
+&dsp2 {
+	status = "okay";
+	memory-region = <&dsp2_memory_region>;
+};
diff --git a/arch/arm/boot/dts/am572x-idk-common.dtsi b/arch/arm/boot/dts/am572x-idk-common.dtsi
index 37ce2d7c4173..1d66278c3a72 100644
--- a/arch/arm/boot/dts/am572x-idk-common.dtsi
+++ b/arch/arm/boot/dts/am572x-idk-common.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 #include <dt-bindings/gpio/gpio.h>
diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts
index c3d966904d64..1a3af4b54308 100644
--- a/arch/arm/boot/dts/am572x-idk.dts
+++ b/arch/arm/boot/dts/am572x-idk.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2015-2016 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/am5748.dtsi b/arch/arm/boot/dts/am5748.dtsi
index 2b65317b1513..2cb577432766 100644
--- a/arch/arm/boot/dts/am5748.dtsi
+++ b/arch/arm/boot/dts/am5748.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 #include "dra76x.dtsi"
diff --git a/arch/arm/boot/dts/am574x-idk.dts b/arch/arm/boot/dts/am574x-idk.dts
index 85c95cc551dd..c9275d0c62cf 100644
--- a/arch/arm/boot/dts/am574x-idk.dts
+++ b/arch/arm/boot/dts/am574x-idk.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
index 94135fc5dd44..b3a0206ebd6c 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2014-2016 Texas Instruments Incorporated - https://www.ti.com/
  */
 /dts-v1/;
 
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts b/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts
index 39d1c4ff5749..83e174e053c7 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2014-2016 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 #include "am57xx-beagle-x15-common.dtsi"
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts b/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts
index 4187a9729f96..656dd84460d2 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2014-2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2014-2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 #include "am57xx-beagle-x15-common.dtsi"
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
index a5c24ed4d12f..0a8b16505ed9 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2014-2016 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 #include "am57xx-beagle-x15-common.dtsi"
diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi
index 2c0aab352b44..1c77006cccd1 100644
--- a/arch/arm/boot/dts/am57xx-idk-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2015-2016 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 #include "am57xx-industrial-grade.dtsi"
diff --git a/arch/arm/boot/dts/arm-realview-eb-mp.dtsi b/arch/arm/boot/dts/arm-realview-eb-mp.dtsi
index 29b636fce23f..26783d053ac7 100644
--- a/arch/arm/boot/dts/arm-realview-eb-mp.dtsi
+++ b/arch/arm/boot/dts/arm-realview-eb-mp.dtsi
@@ -59,7 +59,7 @@
 			interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		L2: l2-cache {
+		L2: cache-controller {
 			compatible = "arm,l220-cache";
 			reg = <0x1f002000 0x1000>;
 			interrupt-parent = <&intc>;
diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts
index 2625ce66f8e7..f925782f8560 100644
--- a/arch/arm/boot/dts/arm-realview-pb1176.dts
+++ b/arch/arm/boot/dts/arm-realview-pb1176.dts
@@ -323,7 +323,7 @@
 			      <0x10120000 0x100>;
 		};
 
-		L2: l2-cache {
+		L2: cache-controller {
 			compatible = "arm,l220-cache";
 			reg = <0x10110000 0x1000>;
 			interrupt-parent = <&intc_dc1176>;
diff --git a/arch/arm/boot/dts/arm-realview-pb11mp.dts b/arch/arm/boot/dts/arm-realview-pb11mp.dts
index c69cf7ddbe61..9748e0fe800f 100644
--- a/arch/arm/boot/dts/arm-realview-pb11mp.dts
+++ b/arch/arm/boot/dts/arm-realview-pb11mp.dts
@@ -92,7 +92,7 @@
 		      <0x1f000100 0x100>;
 	};
 
-	L2: l2-cache {
+	L2: cache-controller {
 		compatible = "arm,l220-cache";
 		reg = <0x1f002000 0x1000>;
 		interrupt-parent = <&intc_tc11mp>;
diff --git a/arch/arm/boot/dts/arm-realview-pbx-a9.dts b/arch/arm/boot/dts/arm-realview-pbx-a9.dts
index 90d00b407f85..85d3968fbb91 100644
--- a/arch/arm/boot/dts/arm-realview-pbx-a9.dts
+++ b/arch/arm/boot/dts/arm-realview-pbx-a9.dts
@@ -60,7 +60,7 @@
 		};
 	};
 
-	L2: l2-cache {
+	L2: cache-controller {
 		compatible = "arm,pl310-cache";
 		reg = <0x1f002000 0x1000>;
 		cache-unified;
diff --git a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
index baa459dd51e4..2008c6eaaa52 100644
--- a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
+++ b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
@@ -247,9 +247,8 @@
 &mdio {
 	phy0: ethernet-phy@0 { /* Marvell 88E1318 */
 		reg = <0>;
-		marvell,reg-init = <0x0 0x16 0x0 0x0002>,
-				<0x0 0x19 0x0 0x0077>,
-				<0x0 0x18 0x0 0x5747>;
+		marvell,reg-init = <0x2 0x19 0x0 0x0077>,
+				   <0x2 0x18 0x0 0x5747>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
index 348116501aa2..9b1a24cc5e91 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -342,7 +342,8 @@
 
 			comphy: phy@18300 {
 				compatible = "marvell,armada-380-comphy";
-				reg = <0x18300 0x100>;
+				reg-names = "comphy", "conf";
+				reg = <0x18300 0x100>, <0x18460 4>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 
diff --git a/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts b/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts
new file mode 100644
index 000000000000..60ba86f3e5bc
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts
@@ -0,0 +1,219 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2020 AMD Inc.
+// Author: Supreeth Venkatesh <supreeth.venkatesh@amd.com>
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "AMD EthanolX BMC";
+	compatible = "amd,ethanolx-bmc", "aspeed,ast2500";
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+	aliases {
+		serial0 = &uart1;
+		serial4 = &uart5;
+	};
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlyprintk";
+	};
+	leds {
+		compatible = "gpio-leds";
+
+		fault {
+			gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		identify {
+			gpios = <&gpio ASPEED_GPIO(A, 3) GPIO_ACTIVE_LOW>;
+		};
+	};
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+};
+
+&uart1 {
+	//Host Console
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default>;
+};
+
+&uart5 {
+	//BMC Console
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+		     &pinctrl_adc1_default
+		     &pinctrl_adc2_default
+		     &pinctrl_adc3_default
+		     &pinctrl_adc4_default>;
+};
+
+//APML for P0
+&i2c0 {
+	status = "okay";
+};
+
+//APML for P1
+&i2c1 {
+	status = "okay";
+};
+
+// Thermal Sensors
+&i2c7 {
+	status = "okay";
+
+	lm75a@48 {
+		compatible = "national,lm75a";
+		reg = <0x48>;
+	};
+
+	lm75a@49 {
+		compatible = "national,lm75a";
+		reg = <0x49>;
+	};
+
+	lm75a@4a {
+		compatible = "national,lm75a";
+		reg = <0x4a>;
+	};
+
+	lm75a@4b {
+		compatible = "national,lm75a";
+		reg = <0x4b>;
+	};
+
+	lm75a@4c {
+		compatible = "national,lm75a";
+		reg = <0x4c>;
+	};
+
+	lm75a@4d {
+		compatible = "national,lm75a";
+		reg = <0x4d>;
+	};
+
+	lm75a@4e {
+		compatible = "national,lm75a";
+		reg = <0x4e>;
+	};
+
+	lm75a@4f {
+		compatible = "national,lm75a";
+		reg = <0x4f>;
+	};
+};
+
+&kcs1 {
+	status = "okay";
+	kcs_addr = <0x60>;
+};
+
+&kcs2 {
+	status = "okay";
+	kcs_addr = <0x62>;
+};
+
+&kcs4 {
+	status = "okay";
+	kcs_addr = <0x97DE>;
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&lpc_ctrl {
+	//Enable lpc clock
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+	&pinctrl_pwm1_default
+	&pinctrl_pwm2_default
+	&pinctrl_pwm3_default
+	&pinctrl_pwm4_default
+	&pinctrl_pwm5_default
+	&pinctrl_pwm6_default
+	&pinctrl_pwm7_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	fan@6 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@7 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+};
+
+
+
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts
index 016bbcb99bb6..7bc7df7ed428 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts
@@ -19,8 +19,8 @@
 		serial3 = &uart4;
 
 		/*
-		 * Hardcode the bus number of i2c switches' channels to
-		 * avoid breaking the legacy applications.
+		 * PCA9548 (1-0077) provides 8 channels for connecting to
+		 * 4 Line Cards and 4 Fabric Cards.
 		 */
 		i2c16 = &imux16;
 		i2c17 = &imux17;
@@ -30,6 +30,11 @@
 		i2c21 = &imux21;
 		i2c22 = &imux22;
 		i2c23 = &imux23;
+
+		/*
+		 * PCA9548 (2-0071) provides 8 channels for connecting to
+		 * Power Distribution Board.
+		 */
 		i2c24 = &imux24;
 		i2c25 = &imux25;
 		i2c26 = &imux26;
@@ -38,6 +43,11 @@
 		i2c29 = &imux29;
 		i2c30 = &imux30;
 		i2c31 = &imux31;
+
+		/*
+		 * PCA9548 (8-0077) provides 8 channels and the first 4
+		 * channels are connecting to 4 Fan Control Boards.
+		 */
 		i2c32 = &imux32;
 		i2c33 = &imux33;
 		i2c34 = &imux34;
@@ -46,6 +56,226 @@
 		i2c37 = &imux37;
 		i2c38 = &imux38;
 		i2c39 = &imux39;
+
+		/*
+		 * 2 PCA9548 (18-0070 & 18-0073), 16 channels connecting
+		 * to Line Card #1.
+		 */
+		i2c40 = &imux40;
+		i2c41 = &imux41;
+		i2c42 = &imux42;
+		i2c43 = &imux43;
+		i2c44 = &imux44;
+		i2c45 = &imux45;
+		i2c46 = &imux46;
+		i2c47 = &imux47;
+		i2c48 = &imux48;
+		i2c49 = &imux49;
+		i2c50 = &imux50;
+		i2c51 = &imux51;
+		i2c52 = &imux52;
+		i2c53 = &imux53;
+		i2c54 = &imux54;
+		i2c55 = &imux55;
+
+		/*
+		 * 2 PCA9548 (19-0070 & 19-0073), 16 channels connecting
+		 * to Line Card #2.
+		 */
+		i2c56 = &imux56;
+		i2c57 = &imux57;
+		i2c58 = &imux58;
+		i2c59 = &imux59;
+		i2c60 = &imux60;
+		i2c61 = &imux61;
+		i2c62 = &imux62;
+		i2c63 = &imux63;
+		i2c64 = &imux64;
+		i2c65 = &imux65;
+		i2c66 = &imux66;
+		i2c67 = &imux67;
+		i2c68 = &imux68;
+		i2c69 = &imux69;
+		i2c70 = &imux70;
+		i2c71 = &imux71;
+
+		/*
+		 * 2 PCA9548 (20-0070 & 20-0073), 16 channels connecting
+		 * to Line Card #3.
+		 */
+		i2c72 = &imux72;
+		i2c73 = &imux73;
+		i2c74 = &imux74;
+		i2c75 = &imux75;
+		i2c76 = &imux76;
+		i2c77 = &imux77;
+		i2c78 = &imux78;
+		i2c79 = &imux79;
+		i2c80 = &imux80;
+		i2c81 = &imux81;
+		i2c82 = &imux82;
+		i2c83 = &imux83;
+		i2c84 = &imux84;
+		i2c85 = &imux85;
+		i2c86 = &imux86;
+		i2c87 = &imux87;
+
+		/*
+		 * 2 PCA9548 (21-0070 & 21-0073), 16 channels connecting
+		 * to Line Card #4.
+		 */
+		i2c88 = &imux88;
+		i2c89 = &imux89;
+		i2c90 = &imux90;
+		i2c91 = &imux91;
+		i2c92 = &imux92;
+		i2c93 = &imux93;
+		i2c94 = &imux94;
+		i2c95 = &imux95;
+		i2c96 = &imux96;
+		i2c97 = &imux97;
+		i2c98 = &imux98;
+		i2c99 = &imux99;
+		i2c100 = &imux100;
+		i2c101 = &imux101;
+		i2c102 = &imux102;
+		i2c103 = &imux103;
+
+		/*
+		 * 2 PCA9548 (16-0070 & 16-0073), 16 channels connecting
+		 * to Fabric Card #1.
+		 */
+		i2c104 = &imux104;
+		i2c105 = &imux105;
+		i2c106 = &imux106;
+		i2c107 = &imux107;
+		i2c108 = &imux108;
+		i2c109 = &imux109;
+		i2c110 = &imux110;
+		i2c111 = &imux111;
+		i2c112 = &imux112;
+		i2c113 = &imux113;
+		i2c114 = &imux114;
+		i2c115 = &imux115;
+		i2c116 = &imux116;
+		i2c117 = &imux117;
+		i2c118 = &imux118;
+		i2c119 = &imux119;
+
+		/*
+		 * 2 PCA9548 (17-0070 & 17-0073), 16 channels connecting
+		 * to Fabric Card #2.
+		 */
+		i2c120 = &imux120;
+		i2c121 = &imux121;
+		i2c122 = &imux122;
+		i2c123 = &imux123;
+		i2c124 = &imux124;
+		i2c125 = &imux125;
+		i2c126 = &imux126;
+		i2c127 = &imux127;
+		i2c128 = &imux128;
+		i2c129 = &imux129;
+		i2c130 = &imux130;
+		i2c131 = &imux131;
+		i2c132 = &imux132;
+		i2c133 = &imux133;
+		i2c134 = &imux134;
+		i2c135 = &imux135;
+
+		/*
+		 * 2 PCA9548 (22-0070 & 22-0073), 16 channels connecting
+		 * to Fabric Card #3.
+		 */
+		i2c136 = &imux136;
+		i2c137 = &imux137;
+		i2c138 = &imux138;
+		i2c139 = &imux139;
+		i2c140 = &imux140;
+		i2c141 = &imux141;
+		i2c142 = &imux142;
+		i2c143 = &imux143;
+		i2c144 = &imux144;
+		i2c145 = &imux145;
+		i2c146 = &imux146;
+		i2c147 = &imux147;
+		i2c148 = &imux148;
+		i2c149 = &imux149;
+		i2c150 = &imux150;
+		i2c151 = &imux151;
+
+		/*
+		 * 2 PCA9548 (23-0070 & 23-0073), 16 channels connecting
+		 * to Fabric Card #4.
+		 */
+		i2c152 = &imux152;
+		i2c153 = &imux153;
+		i2c154 = &imux154;
+		i2c155 = &imux155;
+		i2c156 = &imux156;
+		i2c157 = &imux157;
+		i2c158 = &imux158;
+		i2c159 = &imux159;
+		i2c160 = &imux160;
+		i2c161 = &imux161;
+		i2c162 = &imux162;
+		i2c163 = &imux163;
+		i2c164 = &imux164;
+		i2c165 = &imux165;
+		i2c166 = &imux166;
+		i2c167 = &imux167;
+
+		/*
+		 * PCA9548 (32-0070), 8 channels connecting to Fan Control
+		 # Board #1.
+		 */
+		i2c168 = &imux168;
+		i2c169 = &imux169;
+		i2c170 = &imux170;
+		i2c171 = &imux171;
+		i2c172 = &imux172;
+		i2c173 = &imux173;
+		i2c174 = &imux174;
+		i2c175 = &imux175;
+
+		/*
+		 * PCA9548 (33-0070), 8 channels connecting to Fan Control
+		 # Board #2.
+		 */
+		i2c176 = &imux176;
+		i2c177 = &imux177;
+		i2c178 = &imux178;
+		i2c179 = &imux179;
+		i2c180 = &imux180;
+		i2c181 = &imux181;
+		i2c182 = &imux182;
+		i2c183 = &imux183;
+
+		/*
+		 * PCA9548 (34-0070), 8 channels connecting to Fan Control
+		 # Board #3.
+		 */
+		i2c184 = &imux184;
+		i2c185 = &imux185;
+		i2c186 = &imux186;
+		i2c187 = &imux187;
+		i2c188 = &imux188;
+		i2c189 = &imux189;
+		i2c190 = &imux190;
+		i2c191 = &imux191;
+
+		/*
+		 * PCA9548 (35-0070), 8 channels connecting to Fan Control
+		 # Board #4.
+		 */
+		i2c192 = &imux192;
+		i2c193 = &imux193;
+		i2c194 = &imux194;
+		i2c195 = &imux195;
+		i2c196 = &imux196;
+		i2c197 = &imux197;
+		i2c198 = &imux198;
+		i2c199 = &imux199;
 	};
 
 	chosen {
@@ -103,53 +333,846 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x77>;
+		i2c-mux-idle-disconnect;
 
+		/* To Fabric Card #1 */
 		imux16: i2c@0 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0>;
+
+			i2c-switch@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux104: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux105: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux106: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux107: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux108: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux109: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux110: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux111: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+			i2c-switch@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux112: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux113: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux114: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux115: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux116: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux117: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux118: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux119: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
 		};
 
+		/* To Fabric Card #2 */
 		imux17: i2c@1 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <1>;
+
+			i2c-switch@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux120: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux121: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux122: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux123: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux124: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux125: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux126: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux127: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+			i2c-switch@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux128: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux129: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux130: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux131: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux132: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux133: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux134: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux135: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
 		};
 
+		/* To Line Card #1 */
 		imux18: i2c@2 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <2>;
+
+			i2c-switch@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux40: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux41: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux42: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux43: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux44: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux45: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux46: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux47: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+			i2c-switch@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux48: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux49: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux50: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux51: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux52: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux53: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux54: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux55: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
 		};
 
+		/* To Line Card #2 */
 		imux19: i2c@3 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <3>;
+
+			i2c-switch@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux56: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux57: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux58: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux59: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux60: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux61: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux62: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux63: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+			i2c-switch@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux64: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux65: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux66: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux67: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux68: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux69: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux70: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux71: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
 		};
 
+		/* To LC3 SCM */
 		imux20: i2c@4 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <4>;
+
+			i2c-switch@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux72: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux73: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux74: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux75: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux76: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux77: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux78: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux79: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+			i2c-switch@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux80: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux81: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux82: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux83: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux84: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux85: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux86: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux87: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
 		};
 
+		/* To Line Card #4 */
 		imux21: i2c@5 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <5>;
+
+			i2c-switch@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux88: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux89: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux90: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux91: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux92: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux93: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux94: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux95: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+			i2c-switch@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux96: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux97: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux98: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux99: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux100: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux101: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux102: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux103: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
 		};
 
+		/* To Fabric Card #3 */
 		imux22: i2c@6 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <6>;
+
+			i2c-switch@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux136: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux137: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux138: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux139: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux140: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux141: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux142: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux143: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+			i2c-switch@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux144: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux145: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux146: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux147: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux148: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux149: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux150: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux151: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
 		};
 
+		/* To Fabric Card #4 */
 		imux23: i2c@7 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <7>;
+
+			i2c-switch@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux152: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux153: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux154: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux155: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux156: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux157: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux158: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux159: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+			i2c-switch@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux160: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux161: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux162: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux163: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux164: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux165: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux166: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux167: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
 		};
 	};
 };
@@ -165,6 +1188,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x71>;
+		i2c-mux-idle-disconnect;
 
 		imux24: i2c@0 {
 			#address-cells = <1>;
@@ -252,7 +1276,7 @@
 };
 
 /*
- * I2C bus to Fan Control Board.
+ * I2C bus to Fan Control Boards.
  */
 &i2c8 {
 	status = "okay";
@@ -262,29 +1286,230 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x77>;
+		i2c-mux-idle-disconnect;
 
+		/* To Fan Control Board #1 */
 		imux32: i2c@0 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0>;
+
+			i2c-switch@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux168: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux169: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux170: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux171: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux172: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux173: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux174: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux175: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
 		};
 
+		/* To Fan Control Board #2 */
 		imux33: i2c@1 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <1>;
+
+			i2c-switch@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux176: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux177: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux178: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux179: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux180: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux181: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux182: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux183: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
 		};
 
+		/* To Fan Control Board #3 */
 		imux34: i2c@2 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <2>;
+
+			i2c-switch@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux184: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux185: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux186: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux187: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux188: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux189: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux190: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux191: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
 		};
 
+		/* To Fan Control Board #4 */
 		imux35: i2c@3 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <3>;
+
+			i2c-switch@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux192: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux193: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux194: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux195: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux196: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux197: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux198: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux199: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
 		};
 
 		imux36: i2c@4 {
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts
index 54e508530dce..8ac23ff6b09e 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts
@@ -27,6 +27,11 @@
 	memory@40000000 {
 		reg = <0x40000000 0x20000000>;
 	};
+
+	ast-adc-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>;
+	};
 };
 
 &wdt1 {
@@ -115,26 +120,47 @@
 	status = "okay";
 };
 
-&i2c9 {
+&i2c11 {
 	status = "okay";
 };
 
-&i2c10 {
+&i2c12 {
 	status = "okay";
 };
 
-&i2c11 {
+&vhub {
 	status = "okay";
 };
 
-&i2c12 {
+&adc {
 	status = "okay";
 };
 
-&i2c13 {
+&pwm_tacho {
 	status = "okay";
-};
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+		     &pinctrl_pwm1_default
+		     &pinctrl_pwm6_default
+		     &pinctrl_pwm7_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
+	};
 
-&vhub {
-	status = "okay";
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
+	};
+
+	fan@6 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>;
+	};
+
+	fan@7 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>;
+	};
 };
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
index bdfe342bf7c5..b94421f6cbd5 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
@@ -12,6 +12,23 @@
 
 	aliases {
 		serial4 = &uart5;
+		i2c16 = &i2c2mux0;
+		i2c17 = &i2c2mux1;
+		i2c18 = &i2c2mux2;
+		i2c19 = &i2c2mux3;
+
+		spi10 = &cfam0_spi0;
+		spi11 = &cfam0_spi1;
+		spi12 = &cfam0_spi2;
+		spi13 = &cfam0_spi3;
+		spi20 = &cfam1_spi0;
+		spi21 = &cfam1_spi1;
+		spi22 = &cfam1_spi2;
+		spi23 = &cfam1_spi3;
+		spi30 = &cfam2_spi0;
+		spi31 = &cfam2_spi1;
+		spi32 = &cfam2_spi2;
+		spi33 = &cfam2_spi3;
 	};
 
 	chosen {
@@ -68,12 +85,51 @@
 		};
 	};
 
+	i2c2mux: i2cmux {
+		compatible = "i2c-mux-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		i2c-parent = <&i2c2>;
+		mux-gpios = <&gpio0 ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>,
+			    <&gpio0 ASPEED_GPIO(G, 5) GPIO_ACTIVE_HIGH>;
+		idle-state = <0>;
+
+		i2c2mux0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c2mux1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c2mux2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c2mux3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&ehci1 {
+	status = "okay";
 };
 
 &gpio0 {
 	gpio-line-names =
 	/*A0-A7*/	"","","","","","","","",
-	/*B0-B7*/	"","","","","","","","",
+	/*B0-B7*/	"","","","","","","checkstop","",
 	/*C0-C7*/	"","","","","","","","",
 	/*D0-D7*/	"","","","","","","","",
 	/*E0-E7*/	"","","","","","","","",
@@ -86,7 +142,7 @@
 	/*L0-L7*/	"","","","","","","","",
 	/*M0-M7*/	"","","","","","","","",
 	/*N0-N7*/	"","","","","","","","",
-	/*O0-O7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","usb-power","","","","",
 	/*P0-P7*/	"","","","","","","","",
 	/*Q0-Q7*/	"cfam-reset","","","","","","","",
 	/*R0-R7*/	"","","","","","","","",
@@ -102,6 +158,20 @@
 	/*AA0-AA7*/	"","","","","","","","",
 	/*AB0-AB7*/	"","","","","","","","",
 	/*AC0-AC7*/	"","","","","","","","";
+
+	pin_mclr_vpp {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(P, 7) GPIO_OPEN_DRAIN>;
+		output-high;
+		line-name = "mclr_vpp";
+	};
+
+	i2c3_mux_oe_n {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 6) GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "I2C3_MUX_OE_N";
+	};
 };
 
 &emmc_controller {
@@ -118,6 +188,12 @@
 	#address-cells = <2>;
 	#size-cells = <0>;
 
+	/*
+	 * CFAM Reset is supposed to be active low but pass1 hardware is wired
+	 * active high.
+	 */
+	cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>;
+
 	cfam@0,0 {
 		reg = <0 0>;
 		#address-cells = <1>;
@@ -129,6 +205,84 @@
 			reg = <0x1000 0x400>;
 		};
 
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam0_spi0: spi@0 {
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam0_spi1: spi@20 {
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam0_spi2: spi@40 {
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam0_spi3: spi@60 {
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+                };
+
 		sbefifo@2400 {
 			compatible = "ibm,p9-sbefifo";
 			reg = <0x2400 0x400>;
@@ -136,7 +290,7 @@
 			#size-cells = <0>;
 
 			fsi_occ0: occ {
-				compatible = "ibm,p9-occ";
+				compatible = "ibm,p10-occ";
 			};
 		};
 
@@ -163,6 +317,84 @@
 			reg = <0x1000 0x400>;
 		};
 
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam1_spi0: spi@0 {
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam1_spi1: spi@20 {
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam1_spi2: spi@40 {
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam1_spi3: spi@60 {
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+                };
+
 		sbefifo@2400 {
 			compatible = "ibm,p9-sbefifo";
 			reg = <0x2400 0x400>;
@@ -170,7 +402,7 @@
 			#size-cells = <0>;
 
 			fsi_occ1: occ {
-				compatible = "ibm,p9-occ";
+				compatible = "ibm,p10-occ";
 			};
 		};
 
@@ -183,6 +415,116 @@
 			no-scan-on-init;
 		};
 	};
+
+	cfam@2,0 {
+		reg = <2 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <2>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam2_spi0: spi@0 {
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam2_spi1: spi@20 {
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam2_spi2: spi@40 {
+				reg = <0x40>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam2_spi3: spi@60 {
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ2: occ {
+				compatible = "ibm,p10-occ";
+			};
+		};
+
+		fsi_hub2: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
 };
 
 /* Legacy OCC numbering (to get rid of when userspace is fixed) */
@@ -194,6 +536,10 @@
 	reg = <2>;
 };
 
+&fsi_occ2 {
+	reg = <3>;
+};
+
 &ibt {
 	status = "okay";
 };
@@ -205,6 +551,21 @@
 		compatible = "atmel,24c64";
 		reg = <0x51>;
 	};
+
+	tca9554@40 {
+		compatible = "ti,tca9554";
+		reg = <0x40>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		smbus0 {
+			gpio-hog;
+			gpios = <4 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "smbus0";
+		};
+	};
+
 };
 
 &i2c1 {
@@ -519,6 +880,96 @@
 		compatible = "atmel,24c64";
 		reg = <0x51>;
 	};
+
+	pca1: pca9552@61 {
+		compatible = "nxp,pca9552";
+		reg = <0x61>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@8 {
+			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@14 {
+			reg = <14>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@15 {
+			reg = <15>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
 };
 
 &i2c9 {
@@ -656,13 +1107,6 @@
 		spi-max-frequency = <50000000>;
 #include "openbmc-flash-layout-128.dtsi"
 	};
-
-	flash@1 {
-		status = "okay";
-		m25p,fast-read;
-		label = "alt-bmc";
-		spi-max-frequency = <50000000>;
-	};
 };
 
 &spi1 {
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
index 60e545b6396f..cb85168f6761 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
@@ -820,12 +820,50 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0>;
+
+			tca9554@39 {
+				compatible = "ti,tca9554";
+				reg = <0x39>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				smbus0 {
+					gpio-hog;
+					gpios = <4 GPIO_ACTIVE_HIGH>;
+					output-high;
+					line-name = "smbus0";
+				};
+			};
+
+			tmp431@4c {
+				compatible = "ti,tmp401";
+				reg = <0x4c>;
+			};
 		};
 
 		bus9_mux232: i2c@1 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <1>;
+
+			tca9554@39 {
+				compatible = "ti,tca9554";
+				reg = <0x39>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				smbus1 {
+					gpio-hog;
+					gpios = <4 GPIO_ACTIVE_HIGH>;
+					output-high;
+					line-name = "smbus1";
+				};
+			};
+
+			tmp431@4c {
+				compatible = "ti,tmp401";
+				reg = <0x4c>;
+			};
 		};
 
 		bus9_mux233: i2c@2 {
@@ -855,12 +893,50 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0>;
+
+			tca9554@39 {
+				compatible = "ti,tca9554";
+				reg = <0x39>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				smbus2 {
+					gpio-hog;
+					gpios = <4 GPIO_ACTIVE_HIGH>;
+					output-high;
+					line-name = "smbus2";
+				};
+			};
+
+			tmp431@4c {
+				compatible = "ti,tmp401";
+				reg = <0x4c>;
+			};
 		};
 
 		bus9_mux236: i2c@1 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <1>;
+
+			tca9554@39 {
+				compatible = "ti,tca9554";
+				reg = <0x39>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				smbus3 {
+					gpio-hog;
+					gpios = <4 GPIO_ACTIVE_HIGH>;
+					output-high;
+					line-name = "smbus3";
+				};
+			};
+
+			tmp431@4c {
+				compatible = "ti,tmp401";
+				reg = <0x4c>;
+			};
 		};
 
 		bus9_mux237: i2c@2 {
@@ -909,12 +985,50 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0>;
+
+			tca9554@39 {
+				compatible = "ti,tca9554";
+				reg = <0x39>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				smbus4 {
+					gpio-hog;
+					gpios = <4 GPIO_ACTIVE_HIGH>;
+					output-high;
+					line-name = "smbus4";
+				};
+			};
+
+			tmp431@4c {
+				compatible = "ti,tmp401";
+				reg = <0x4c>;
+			};
 		};
 
 		bus10_mux240: i2c@1 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <1>;
+
+			tca9554@39 {
+				compatible = "ti,tca9554";
+				reg = <0x39>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				smbus5 {
+					gpio-hog;
+					gpios = <4 GPIO_ACTIVE_HIGH>;
+					output-high;
+					line-name = "smbus5";
+				};
+			};
+
+			tmp431@4c {
+				compatible = "ti,tmp401";
+				reg = <0x4c>;
+			};
 		};
 
 		bus10_mux241: i2c@2 {
@@ -944,12 +1058,50 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0>;
+
+			tca9554@39 {
+				compatible = "ti,tca9554";
+				reg = <0x39>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				smbus6 {
+					gpio-hog;
+					gpios = <4 GPIO_ACTIVE_HIGH>;
+					output-high;
+					line-name = "smbus6";
+				};
+			};
+
+			tmp431@4c {
+				compatible = "ti,tmp401";
+				reg = <0x4c>;
+			};
 		};
 
 		bus10_mux244: i2c@1 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <1>;
+
+			tca9554@39 {
+				compatible = "ti,tca9554";
+				reg = <0x39>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				smbus7 {
+					gpio-hog;
+					gpios = <4 GPIO_ACTIVE_HIGH>;
+					output-high;
+					line-name = "smbus7";
+				};
+			};
+
+			tmp431@4c {
+				compatible = "ti,tmp401";
+				reg = <0x4c>;
+			};
 		};
 
 		bus10_mux245: i2c@2 {
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
index 13c4aa02f4de..5f4ee67ac787 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
@@ -29,76 +29,17 @@
 			no-map;
 			reg = <0xb8000000 0x4000000>; /* 64M */
 		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		checkstop {
-			label = "checkstop";
-			gpios = <&gpio0 ASPEED_GPIO(E, 3) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(E, 3)>;
-		};
-
-		ps0-presence {
-			label = "ps0-presence";
-			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(H, 3)>;
-		};
-
-		ps1-presence {
-			label = "ps1-presence";
-			gpios = <&gpio0 ASPEED_GPIO(E, 5) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(E, 5)>;
-		};
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <1000>;
-
-		fan0-presence {
-			label = "fan0-presence";
-			gpios = <&pca0 4 GPIO_ACTIVE_LOW>;
-			linux,code = <4>;
-		};
-
-		fan1-presence {
-			label = "fan1-presence";
-			gpios = <&pca0 5 GPIO_ACTIVE_LOW>;
-			linux,code = <5>;
-		};
 
-		fan2-presence {
-			label = "fan2-presence";
-			gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
-			linux,code = <6>;
-		};
-
-		fan3-presence {
-			label = "fan3-presence";
-			gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
-			linux,code = <7>;
+		vga_memory: region@bf000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>;	/* 16M */
 		};
 	};
 
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		air-water {
-			label = "air-water";
-			gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(Q, 7)>;
-		};
-
-		checkstop {
-			label = "checkstop";
-			gpios = <&gpio0 ASPEED_GPIO(E, 3) GPIO_ACTIVE_LOW>;
-			linux,code = <ASPEED_GPIO(E, 3)>;
-		};
-
 		ps0-presence {
 			label = "ps0-presence";
 			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
@@ -154,6 +95,10 @@
 	};
 };
 
+&ehci1 {
+	status = "okay";
+};
+
 &gpio0 {
 	gpio-line-names =
 	/*A0-A7*/	"","","","","","","","",
@@ -170,7 +115,7 @@
 	/*L0-L7*/	"","","","","","","","",
 	/*M0-M7*/	"","","","","","","","",
 	/*N0-N7*/	"","","","","","","","",
-	/*O0-O7*/	"led-rear-power","led-rear-id","","","","","","",
+	/*O0-O7*/	"led-rear-power","led-rear-id","","usb-power","","","","",
 	/*P0-P7*/	"","","","","","","","",
 	/*Q0-Q7*/	"cfam-reset","","","","","","","fsi-routing",
 	/*R0-R7*/	"","","","","","","","",
@@ -244,6 +189,7 @@
 
 	fsi-routing-gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_HIGH>;
 	fsi-mux-gpios = <&gpio0 ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>;
+	cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
 
 	cfam@0,0 {
 		reg = <0 0>;
@@ -912,3 +858,8 @@
 	pinctrl-0 = <&pinctrl_lpc_default>,
 		    <&pinctrl_lsirq_default>;
 };
+
+&xdma {
+	status = "okay";
+	memory-region = <&vga_memory>;
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
index a0f99e34ac8e..85d58a63ae90 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
@@ -27,6 +27,12 @@
 			reg = <0x98000000 0x04000000>; /* 64M */
 		};
 
+		vga_memory: region@9f000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
 		gfx_memory: framebuffer {
 			size = <0x01000000>;
 			alignment = <0x01000000>;
@@ -690,4 +696,9 @@
 	memory-region = <&video_engine_memory>;
 };
 
+&xdma {
+	status = "okay";
+	memory-region = <&vga_memory>;
+};
+
 #include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index de7fd80b022a..9c91afb2b404 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0+
 #include <dt-bindings/clock/aspeed-clock.h>
+#include <dt-bindings/interrupt-controller/aspeed-scu-ic.h>
 
 / {
 	model = "Aspeed BMC";
@@ -267,8 +268,8 @@
 				reg = <0x1e6e7000 0x100>;
 				clocks = <&syscon ASPEED_CLK_GATE_BCLK>;
 				resets = <&syscon ASPEED_RESET_XDMA>;
-				interrupts-extended = <&vic 6>, <&scu_ic 2>;
-				pcie-device = "bmc";
+				interrupts-extended = <&vic 6>, <&scu_ic ASPEED_AST2500_SCU_IC_PCIE_RESET_LO_TO_HI>;
+				aspeed,pcie-device = "bmc";
 				aspeed,scu = <&syscon>;
 				status = "disabled";
 			};
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index 9d8d8e18bc90..b58220a49cbd 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -2,6 +2,7 @@
 // Copyright 2019 IBM Corp.
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/aspeed-scu-ic.h>
 #include <dt-bindings/clock/ast2600-clock.h>
 
 / {
@@ -346,22 +347,12 @@
 				resets = <&syscon ASPEED_RESET_DEV_XDMA>, <&syscon ASPEED_RESET_RC_XDMA>;
 				reset-names = "device", "root-complex";
 				interrupts-extended = <&gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
-						      <&scu_ic0 2>;
-				pcie-device = "bmc";
+						      <&scu_ic0 ASPEED_AST2600_SCU_IC0_PCIE_PERST_LO_TO_HI>;
+				aspeed,pcie-device = "bmc";
 				aspeed,scu = <&syscon>;
 				status = "disabled";
 			};
 
-			video: video@1e700000 {
-				compatible = "aspeed,ast2600-video-engine";
-				reg = <0x1e700000 0x1000>;
-				clocks = <&syscon ASPEED_CLK_GATE_VCLK>,
-					 <&syscon ASPEED_CLK_GATE_ECLK>;
-				clock-names = "vclk", "eclk";
-				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-			};
-
 			gpio0: gpio@1e780000 {
 				#gpio-cells = <2>;
 				gpio-controller;
diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts
index a5f5718c711a..ca15ff8fea18 100644
--- a/arch/arm/boot/dts/at91-sam9x60ek.dts
+++ b/arch/arm/boot/dts/at91-sam9x60ek.dts
@@ -309,6 +309,10 @@
 	};
 };
 
+&gpbr {
+	status = "okay";
+};
+
 &i2s {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2s_default>;
@@ -470,9 +474,9 @@
 		pinctrl_classd_default: classd {
 			atmel,pins =
 				<AT91_PIOA 24 AT91_PERIPH_C AT91_PINCTRL_PULL_UP
-				 AT91_PIOA 25 AT91_PERIPH_C AT91_PINCTRL_PULL_UP
+				 AT91_PIOA 25 AT91_PERIPH_C AT91_PINCTRL_PULL_DOWN
 				 AT91_PIOA 26 AT91_PERIPH_C AT91_PINCTRL_PULL_UP
-				 AT91_PIOA 27 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;
+				 AT91_PIOA 27 AT91_PERIPH_C AT91_PINCTRL_PULL_DOWN>;
 		};
 	};
 
@@ -636,6 +640,11 @@
 	};
 };
 
+&rtt {
+	atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+	status = "okay";
+};
+
 &shutdown_controller {
 	atmel,shdwc-debouncer = <976>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index a927165ea7c2..058fae1b4a76 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -168,16 +168,6 @@
 				};
 			};
 
-			pdmic@f8018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_pdmic_default>;
-				atmel,model = "PDMIC @ sama5d2_xplained";
-				atmel,mic-min-freq = <1000000>;
-				atmel,mic-max-freq = <3246000>;
-				atmel,mic-offset = <0x0>;
-				status = "okay";
-			};
-
 			uart1: serial@f8020000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_uart1_default>;
@@ -490,14 +480,18 @@
 					bias-pull-up;
 				};
 
-				pinctrl_classd_default: classd_default {
+				pinctrl_classd_default_pfets: classd_default_pfets {
 					pinmux = <PIN_PB1__CLASSD_R0>,
-						 <PIN_PB2__CLASSD_R1>,
-						 <PIN_PB3__CLASSD_R2>,
-						 <PIN_PB4__CLASSD_R3>;
+						 <PIN_PB3__CLASSD_R2>;
 					bias-pull-up;
 				};
 
+				pinctrl_classd_default_nfets: classd_default_nfets {
+					pinmux = <PIN_PB2__CLASSD_R1>,
+						 <PIN_PB4__CLASSD_R3>;
+					bias-pull-down;
+				};
+
 				pinctrl_flx0_default: flx0_default {
 					pinmux = <PIN_PB28__FLEXCOM0_IO0>,
 						 <PIN_PB29__FLEXCOM0_IO1>;
@@ -595,12 +589,6 @@
 					bias-disable;
 				};
 
-				pinctrl_pdmic_default: pdmic_default {
-					pinmux = <PIN_PB26__PDMIC_DAT>,
-						<PIN_PB27__PDMIC_CLK>;
-					bias-disable;
-				};
-
 				pinctrl_qspi0_default: qspi0_default {
 					sck_cs {
 						pinmux = <PIN_PA22__QSPI0_SCK>,
@@ -696,7 +684,7 @@
 
 			classd: classd@fc048000 {
 				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_classd_default>;
+				pinctrl-0 = <&pinctrl_classd_default_pfets &pinctrl_classd_default_nfets>;
 				atmel,pwm-type = "diff";
 				atmel,non-overlap-time = <10>;
 				status = "okay";
diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
index 61f068a7b362..7abf555cd2fe 100644
--- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
@@ -128,7 +128,7 @@
 			};
 
 			macb0: ethernet@f0028000 {
-				phy-mode = "rgmii";
+				phy-mode = "rgmii-rxid";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "okay";
diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index 1bc45cfd5453..35bdd0969f0a 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -91,7 +91,7 @@
 			      <0x20100 0x100>;
 		};
 
-		L2: l2-cache@22000 {
+		L2: cache-controller@22000 {
 			compatible = "arm,pl310-cache";
 			reg = <0x22000 0x1000>;
 			cache-unified;
diff --git a/arch/arm/boot/dts/bcm-hr2.dtsi b/arch/arm/boot/dts/bcm-hr2.dtsi
index 5e5f5ca3c86f..cbebed5f050e 100644
--- a/arch/arm/boot/dts/bcm-hr2.dtsi
+++ b/arch/arm/boot/dts/bcm-hr2.dtsi
@@ -104,7 +104,7 @@
 			      <0x20100 0x100>;
 		};
 
-		L2: l2-cache@22000 {
+		L2: cache-controller@22000 {
 			compatible = "arm,pl310-cache";
 			reg = <0x22000 0x1000>;
 			cache-unified;
diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index da6d70f09ef1..0346ea621f0f 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -122,7 +122,7 @@
 			      <0x20100 0x100>;
 		};
 
-		L2: l2-cache@22000 {
+		L2: cache-controller@22000 {
 			compatible = "arm,pl310-cache";
 			reg = <0x22000 0x1000>;
 			cache-unified;
@@ -200,7 +200,7 @@
 			status = "disabled";
 		};
 
-		dma@20000 {
+		dma: dma@20000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x20000 0x1000>;
 			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
@@ -215,6 +215,8 @@
 			clocks = <&iprocslow>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
+			dma-coherent;
+			status = "disabled";
 		};
 
 		sdio: sdhci@21000 {
@@ -257,10 +259,10 @@
 			status = "disabled";
 		};
 
-		mailbox: mailbox@25000 {
+		mailbox: mailbox@25c00 {
 			compatible = "brcm,iproc-fa2-mbox";
-			reg = <0x25000 0x445>;
-			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x25c00 0x400>;
+			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
 			#mbox-cells = <1>;
 			brcm,rx-status-len = <32>;
 			brcm,use-bcm-hdr;
diff --git a/arch/arm/boot/dts/bcm21664.dtsi b/arch/arm/boot/dts/bcm21664.dtsi
index 3cf66faf3b56..58ec1b2f8ef6 100644
--- a/arch/arm/boot/dts/bcm21664.dtsi
+++ b/arch/arm/boot/dts/bcm21664.dtsi
@@ -90,7 +90,7 @@
 		reg-io-width = <4>;
 	};
 
-	L2: l2-cache@3ff20000 {
+	L2: cache-controller@3ff20000 {
 		compatible = "arm,pl310-cache";
 		reg = <0x3ff20000 0x1000>;
 		cache-unified;
diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
index c7f1d97e69bb..222d7825e1ab 100644
--- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
+++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
@@ -69,6 +69,11 @@
 };
 
 &firmware {
+	firmware_clocks: clocks {
+		compatible = "raspberrypi,firmware-clocks";
+		#clock-cells = <1>;
+	};
+
 	expgpio: gpio {
 		compatible = "raspberrypi,firmware-gpio";
 		gpio-controller;
diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index a91cf68e3c4c..00bcaed1be32 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -12,6 +12,13 @@
 
 	interrupt-parent = <&gicv2>;
 
+	clk_108MHz: clk-108M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <108000000>;
+		clock-output-names = "108MHz-clock";
+	};
+
 	soc {
 		/*
 		 * Defined ranges:
@@ -244,6 +251,14 @@
 		hvs@7e400000 {
 			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 		};
+
+		dvp: clock@7ef00000 {
+			compatible = "brcm,brcm2711-dvp";
+			reg = <0x7ef00000 0x10>;
+			clocks = <&clk_108MHz>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
 	};
 
 	/*
diff --git a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
index e58c8077be1d..810fc32f1895 100644
--- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
+++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
@@ -60,3 +60,28 @@
 &usb3_phy {
 	status = "okay";
 };
+
+&srab {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			label = "poe";
+		};
+
+		port@4 {
+			reg = <4>;
+			label = "lan";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
index 766db617455b..7604b4480bb1 100644
--- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
@@ -67,3 +67,23 @@
 &usb3_phy {
 	status = "okay";
 };
+
+&srab {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@4 {
+			reg = <4>;
+			label = "lan";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
index b9d95011637d..1ec655809e57 100644
--- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
+++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
@@ -60,3 +60,23 @@
 &usb3_phy {
 	status = "okay";
 };
+
+&srab {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@4 {
+			reg = <4>;
+			label = "poe";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
index 0052e1b24130..04bfd58127fc 100644
--- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
+++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
@@ -108,3 +108,43 @@
 &usb3_phy {
 	status = "okay";
 };
+
+&srab {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			label = "lan4";
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "lan3";
+		};
+
+		port@2 {
+			reg = <2>;
+			label = "lan2";
+		};
+
+		port@3 {
+			reg = <3>;
+			label = "lan1";
+		};
+
+		port@4 {
+			reg = <4>;
+			label = "wan";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
index b47fb0700a1f..068e384b8ab7 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
@@ -54,3 +54,28 @@
 &spi_nor {
 	status = "okay";
 };
+
+&srab {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			label = "poe";
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "lan";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
index 334325390aed..9ae815ddbb4b 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
@@ -17,6 +17,7 @@
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x08000000
 		       0x88000000 0x18000000>;
 	};
@@ -51,3 +52,23 @@
 &spi_nor {
 	status = "okay";
 };
+
+&srab {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			label = "lan";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
index ac7515423474..a21b2d185596 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
@@ -103,3 +103,43 @@
 &usb3_phy {
 	status = "okay";
 };
+
+&srab {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			label = "lan4";
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "lan3";
+		};
+
+		port@2 {
+			reg = <2>;
+			label = "lan2";
+		};
+
+		port@3 {
+			reg = <3>;
+			label = "lan1";
+		};
+
+		port@4 {
+			reg = <4>;
+			label = "wan";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
index 6d28b7dacd05..4d5c5aa7dc42 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
@@ -74,3 +74,43 @@
 &spi_nor {
 	status = "okay";
 };
+
+&srab {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			label = "lan4";
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "lan3";
+		};
+
+		port@2 {
+			reg = <2>;
+			label = "lan2";
+		};
+
+		port@3 {
+			reg = <3>;
+			label = "lan1";
+		};
+
+		port@4 {
+			reg = <4>;
+			label = "wan";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm958522er.dts b/arch/arm/boot/dts/bcm958522er.dts
index 8c388eb8a08f..7be4c4e628e0 100644
--- a/arch/arm/boot/dts/bcm958522er.dts
+++ b/arch/arm/boot/dts/bcm958522er.dts
@@ -58,6 +58,10 @@
 
 /* USB 3 support needed to be complete */
 
+&dma {
+	status = "okay";
+};
+
 &amac0 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/bcm958525er.dts b/arch/arm/boot/dts/bcm958525er.dts
index c339771bb22e..e58ed7e95346 100644
--- a/arch/arm/boot/dts/bcm958525er.dts
+++ b/arch/arm/boot/dts/bcm958525er.dts
@@ -58,6 +58,10 @@
 
 /* USB 3 support needed to be complete */
 
+&dma {
+	status = "okay";
+};
+
 &amac0 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts
index 1c72ec8288de..716da62f5788 100644
--- a/arch/arm/boot/dts/bcm958525xmc.dts
+++ b/arch/arm/boot/dts/bcm958525xmc.dts
@@ -58,6 +58,10 @@
 
 /* XHCI support needed to be complete */
 
+&dma {
+	status = "okay";
+};
+
 &amac0 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/bcm958622hr.dts b/arch/arm/boot/dts/bcm958622hr.dts
index 96a021cebd97..a49c2fd21f4a 100644
--- a/arch/arm/boot/dts/bcm958622hr.dts
+++ b/arch/arm/boot/dts/bcm958622hr.dts
@@ -58,6 +58,10 @@
 
 /* USB 3 and SLIC support needed to be complete */
 
+&dma {
+	status = "okay";
+};
+
 &amac0 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/bcm958623hr.dts
index b2c7f21d471e..dd6dff6452b8 100644
--- a/arch/arm/boot/dts/bcm958623hr.dts
+++ b/arch/arm/boot/dts/bcm958623hr.dts
@@ -58,6 +58,10 @@
 
 /* USB 3 and SLIC support needed to be complete */
 
+&dma {
+	status = "okay";
+};
+
 &amac0 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts
index 536fb24f38bb..a71371b4065e 100644
--- a/arch/arm/boot/dts/bcm958625hr.dts
+++ b/arch/arm/boot/dts/bcm958625hr.dts
@@ -69,6 +69,10 @@
 	status = "okay";
 };
 
+&dma {
+	status = "okay";
+};
+
 &amac0 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts
index 3fcca12d83c2..7b84b54436ed 100644
--- a/arch/arm/boot/dts/bcm958625k.dts
+++ b/arch/arm/boot/dts/bcm958625k.dts
@@ -48,6 +48,10 @@
 	};
 };
 
+&dma {
+	status = "okay";
+};
+
 &amac0 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi
index 3ab3cd250da7..6194857f8a02 100644
--- a/arch/arm/boot/dts/berlin2.dtsi
+++ b/arch/arm/boot/dts/berlin2.dtsi
@@ -106,7 +106,7 @@
 			status = "disabled";
 		};
 
-		l2: l2-cache-controller@ac0000 {
+		l2: cache-controller@ac0000 {
 			compatible = "marvell,tauros3-cache", "arm,pl310-cache";
 			reg = <0xac0000 0x1000>;
 			cache-unified;
diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi
index 7cf3e6302d75..6f30d7eb3b41 100644
--- a/arch/arm/boot/dts/berlin2cd.dtsi
+++ b/arch/arm/boot/dts/berlin2cd.dtsi
@@ -71,7 +71,7 @@
 			status = "disabled";
 		};
 
-		l2: l2-cache-controller@ac0000 {
+		l2: cache-controller@ac0000 {
 			compatible = "arm,pl310-cache";
 			reg = <0xac0000 0x1000>;
 			cache-unified;
diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
index c44a32e873f4..b6a0acac6836 100644
--- a/arch/arm/boot/dts/berlin2q.dtsi
+++ b/arch/arm/boot/dts/berlin2q.dtsi
@@ -149,7 +149,7 @@
 			status = "disabled";
 		};
 
-		l2: l2-cache-controller@ac0000 {
+		l2: cache-controller@ac0000 {
 			compatible = "arm,pl310-cache";
 			reg = <0xac0000 0x1000>;
 			cache-unified;
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index f2e7609e5346..87c517d65f62 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -2,7 +2,7 @@
 /*
  * Device Tree for DA850 EVM board
  *
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  */
 /dts-v1/;
 #include "da850.dtsi"
diff --git a/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi b/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi
index 1c39a8459b39..e75569383dd8 100644
--- a/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi
+++ b/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi
@@ -1,7 +1,7 @@
 /*
  * Device Tree Source for DRA7x SoC DSPEVE thermal
  *
- * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2.  This program is licensed "as is" without any warranty of any
diff --git a/arch/arm/boot/dts/dra7-evm-common.dtsi b/arch/arm/boot/dts/dra7-evm-common.dtsi
index f89a64cbcd53..0f71a9f37a72 100644
--- a/arch/arm/boot/dts/dra7-evm-common.dtsi
+++ b/arch/arm/boot/dts/dra7-evm-common.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 #include "dra74-ipu-dsp-common.dtsi"
@@ -245,26 +245,6 @@
 	rx-num-evt = <32>;
 };
 
-&mailbox5 {
-	status = "okay";
-	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
-		status = "okay";
-	};
-	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
-		status = "okay";
-	};
-};
-
-&mailbox6 {
-	status = "okay";
-	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
-		status = "okay";
-	};
-	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
-		status = "okay";
-	};
-};
-
 &pcie1_rc {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index 7aeb30daf3b8..a952d934fcf2 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
  */
 /dts-v1/;
 
diff --git a/arch/arm/boot/dts/dra7-iva-thermal.dtsi b/arch/arm/boot/dts/dra7-iva-thermal.dtsi
index dd74a5337d1f..a7077321613f 100644
--- a/arch/arm/boot/dts/dra7-iva-thermal.dtsi
+++ b/arch/arm/boot/dts/dra7-iva-thermal.dtsi
@@ -1,7 +1,7 @@
 /*
  * Device Tree Source for DRA7x SoC IVA thermal
  *
- * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2.  This program is licensed "as is" without any warranty of any
diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
index 62ca89551219..27a6a83cc60c 100644
--- a/arch/arm/boot/dts/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/dra7-l4.dtsi
@@ -1207,9 +1207,8 @@
 					<SYSC_IDLE_SMART>,
 					<SYSC_IDLE_SMART_WKUP>;
 			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl DRA7_L4PER_TIMER4_CLKCTRL 0>,
-				 <&timer_sys_clk_div>;
-			clock-names = "fck", "timer_sys_ck";
+			clocks = <&l4per_clkctrl DRA7_L4PER_TIMER4_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0x36000 0x1000>;
@@ -3352,8 +3351,8 @@
 					<SYSC_IDLE_SMART>,
 					<SYSC_IDLE_SMART_WKUP>;
 			/* Domains (P, C): ipu_pwrdm, ipu_clkdm */
-			clocks = <&ipu_clkctrl DRA7_IPU_TIMER5_CLKCTRL 0>, <&timer_sys_clk_div>;
-			clock-names = "fck", "timer_sys_ck";
+			clocks = <&ipu_clkctrl DRA7_IPU_TIMER5_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0x20000 0x1000>;
@@ -3361,8 +3360,8 @@
 			timer5: timer@0 {
 				compatible = "ti,omap5430-timer";
 				reg = <0x0 0x80>;
-				clocks = <&ipu_clkctrl DRA7_IPU_TIMER5_CLKCTRL 24>;
-				clock-names = "fck";
+				clocks = <&ipu_clkctrl DRA7_IPU_TIMER5_CLKCTRL 24>, <&timer_sys_clk_div>;
+				clock-names = "fck", "timer_sys_ck";
 				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
@@ -3379,9 +3378,8 @@
 					<SYSC_IDLE_SMART>,
 					<SYSC_IDLE_SMART_WKUP>;
 			/* Domains (P, C): ipu_pwrdm, ipu_clkdm */
-			clocks = <&ipu_clkctrl DRA7_IPU_TIMER6_CLKCTRL 0>,
-				 <&timer_sys_clk_div>;
-			clock-names = "fck", "timer_sys_ck";
+			clocks = <&ipu_clkctrl DRA7_IPU_TIMER6_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0x22000 0x1000>;
@@ -3389,8 +3387,8 @@
 			timer6: timer@0 {
 				compatible = "ti,omap5430-timer";
 				reg = <0x0 0x80>;
-				clocks = <&ipu_clkctrl DRA7_IPU_TIMER6_CLKCTRL 24>;
-				clock-names = "fck";
+				clocks = <&ipu_clkctrl DRA7_IPU_TIMER6_CLKCTRL 24>, <&timer_sys_clk_div>;
+				clock-names = "fck", "timer_sys_ck";
 				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
@@ -3498,8 +3496,8 @@
 			timer14: timer@0 {
 				compatible = "ti,omap5430-timer";
 				reg = <0x0 0x80>;
-				clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER14_CLKCTRL 24>;
-				clock-names = "fck";
+				clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER14_CLKCTRL 24>, <&timer_sys_clk_div>;
+				clock-names = "fck", "timer_sys_ck";
 				interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>;
 				ti,timer-pwm;
 			};
@@ -3526,8 +3524,8 @@
 			timer15: timer@0 {
 				compatible = "ti,omap5430-timer";
 				reg = <0x0 0x80>;
-				clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER15_CLKCTRL 24>;
-				clock-names = "fck";
+				clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER15_CLKCTRL 24>, <&timer_sys_clk_div>;
+				clock-names = "fck", "timer_sys_ck";
 				interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
 				ti,timer-pwm;
 			};
@@ -3554,8 +3552,8 @@
 			timer16: timer@0 {
 				compatible = "ti,omap5430-timer";
 				reg = <0x0 0x80>;
-				clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER16_CLKCTRL 24>;
-				clock-names = "fck";
+				clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER16_CLKCTRL 24>, <&timer_sys_clk_div>;
+				clock-names = "fck", "timer_sys_ck";
 				interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>;
 				ti,timer-pwm;
 			};
@@ -4007,7 +4005,6 @@
 
 		target-module@80000 {			/* 0x48880000, ap 83 0e.1 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "usb_otg_ss1";
 			reg = <0x80000 0x4>,
 			      <0x80010 0x4>;
 			reg-names = "rev", "sysc";
@@ -4057,7 +4054,6 @@
 
 		target-module@c0000 {			/* 0x488c0000, ap 79 06.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "usb_otg_ss2";
 			reg = <0xc0000 0x4>,
 			      <0xc0010 0x4>;
 			reg-names = "rev", "sysc";
@@ -4108,7 +4104,6 @@
 
 		usb3_tm: target-module@100000 {		/* 0x48900000, ap 85 04.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "usb_otg_ss3";
 			reg = <0x100000 0x4>,
 			      <0x100010 0x4>;
 			reg-names = "rev", "sysc";
@@ -4157,7 +4152,6 @@
 
 		usb4_tm: target-module@140000 {		/* 0x48940000, ap 75 3c.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "usb_otg_ss4";
 			reg = <0x140000 0x4>,
 			      <0x140010 0x4>;
 			reg-names = "rev", "sysc";
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 099546be5014..cca6b123856f 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
  *
  * Based on "omap4.dtsi"
  */
diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts
index a5d275ea7bd3..10da51bee42f 100644
--- a/arch/arm/boot/dts/dra71-evm.dts
+++ b/arch/arm/boot/dts/dra71-evm.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 #include "dra71x.dtsi"
diff --git a/arch/arm/boot/dts/dra71x.dtsi b/arch/arm/boot/dts/dra71x.dtsi
index 695a08ed0360..cad0e4a2bd8d 100644
--- a/arch/arm/boot/dts/dra71x.dtsi
+++ b/arch/arm/boot/dts/dra71x.dtsi
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com/
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi
index c84b63bf0fc8..9273a7d6fa29 100644
--- a/arch/arm/boot/dts/dra72-evm-common.dtsi
+++ b/arch/arm/boot/dts/dra72-evm-common.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2014-2016 Texas Instruments Incorporated - https://www.ti.com/
  */
 /dts-v1/;
 
diff --git a/arch/arm/boot/dts/dra72-evm-revc.dts b/arch/arm/boot/dts/dra72-evm-revc.dts
index 6e70858f6313..54dab0f212d1 100644
--- a/arch/arm/boot/dts/dra72-evm-revc.dts
+++ b/arch/arm/boot/dts/dra72-evm-revc.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/
  */
 #include "dra72-evm-common.dtsi"
 #include "dra72x-mmc-iodelay.dtsi"
diff --git a/arch/arm/boot/dts/dra72-evm-tps65917.dtsi b/arch/arm/boot/dts/dra72-evm-tps65917.dtsi
index 5ff9c43ef30b..7b433f549239 100644
--- a/arch/arm/boot/dts/dra72-evm-tps65917.dtsi
+++ b/arch/arm/boot/dts/dra72-evm-tps65917.dtsi
@@ -1,11 +1,11 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /*
  * Integrated Power Management Chip
- * http://www.ti.com/lit/ds/symlink/tps65917-q1.pdf
+ * https://www.ti.com/lit/ds/symlink/tps65917-q1.pdf
  */
 
 &tps65917 {
diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts
index 951152fe206a..6ea9936f7d9c 100644
--- a/arch/arm/boot/dts/dra72-evm.dts
+++ b/arch/arm/boot/dts/dra72-evm.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2014-2016 Texas Instruments Incorporated - https://www.ti.com/
  */
 #include "dra72-evm-common.dtsi"
 #include "dra72x-mmc-iodelay.dtsi"
diff --git a/arch/arm/boot/dts/dra72x-mmc-iodelay.dtsi b/arch/arm/boot/dts/dra72x-mmc-iodelay.dtsi
index edad87c4292c..a9dce919d443 100644
--- a/arch/arm/boot/dts/dra72x-mmc-iodelay.dtsi
+++ b/arch/arm/boot/dts/dra72x-mmc-iodelay.dtsi
@@ -1,7 +1,7 @@
 /*
  * MMC IOdelay values for TI's DRA72x, DRA71x and AM571x SoCs.
  *
- * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi
index ae23ec14e8fa..d403acc754b6 100644
--- a/arch/arm/boot/dts/dra72x.dtsi
+++ b/arch/arm/boot/dts/dra72x.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2014 Texas Instruments Incorporated - https://www.ti.com/
  *
  * Based on "omap4.dtsi"
  */
diff --git a/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi b/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi
index 214b9e6de2c3..e86da7a970b6 100644
--- a/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi
+++ b/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi
@@ -1,7 +1,7 @@
 /*
  * MMC IOdelay values for TI's DRA74x, DRA75x and AM572x SoCs.
  *
- * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi
index 46d8e7615180..e1850d6c841a 100644
--- a/arch/arm/boot/dts/dra74x.dtsi
+++ b/arch/arm/boot/dts/dra74x.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2014 Texas Instruments Incorporated - https://www.ti.com/
  *
  * Based on "omap4.dtsi"
  */
@@ -49,27 +49,47 @@
 			reg = <0x41500000 0x100>;
 		};
 
-		omap_dwc3_4: omap_dwc3_4@48940000 {
-			compatible = "ti,dwc3";
-			ti,hwmods = "usb_otg_ss4";
-			reg = <0x48940000 0x10000>;
-			interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
+		target-module@48940000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x48940000 0x4>,
+			      <0x48940010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			clocks = <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS4_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			utmi-mode = <2>;
-			ranges;
-			status = "disabled";
-			usb4: usb@48950000 {
-				compatible = "snps,dwc3";
-				reg = <0x48950000 0x17000>;
-				interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "peripheral",
-						  "host",
-						  "otg";
-				maximum-speed = "high-speed";
-				dr_mode = "otg";
+			ranges = <0x0 0x48940000 0x20000>;
+
+			omap_dwc3_4: omap_dwc3_4@0 {
+				compatible = "ti,dwc3";
+				reg = <0 0x10000>;
+				interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				utmi-mode = <2>;
+				ranges;
+				status = "disabled";
+				usb4: usb@10000 {
+					compatible = "snps,dwc3";
+					reg = <0x10000 0x17000>;
+					interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "peripheral",
+							  "host",
+							  "otg";
+					maximum-speed = "high-speed";
+					dr_mode = "otg";
+				};
 			};
 		};
 
diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts
index 820a0ece20d4..803981cc762e 100644
--- a/arch/arm/boot/dts/dra76-evm.dts
+++ b/arch/arm/boot/dts/dra76-evm.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 /dts-v1/;
 
diff --git a/arch/arm/boot/dts/dra76x.dtsi b/arch/arm/boot/dts/dra76x.dtsi
index 42b8a205b64f..b69c7d40f5d8 100644
--- a/arch/arm/boot/dts/dra76x.dtsi
+++ b/arch/arm/boot/dts/dra76x.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 #include "dra74x.dtsi"
diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi
index b27a82072365..6c2f320be2f4 100644
--- a/arch/arm/boot/dts/exynos3250-artik5.dtsi
+++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi
@@ -352,6 +352,14 @@
 };
 
 &pinctrl_1 {
+	bten: bten {
+		samsung,pins ="gpx1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
 	wlanen: wlanen {
 		samsung,pins = "gpx2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
@@ -364,6 +372,22 @@
 		samsung,pins = "gpx3-5";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
+
+	bthostwake: bthostwake {
+		samsung,pins = "gpx3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	btwake: btwake {
+		samsung,pins = "gpx3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT0>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_DOWN>;
+	};
 };
 
 &rtc {
@@ -372,6 +396,23 @@
 	status = "okay";
 };
 
+&serial_0 {
+	assigned-clocks = <&cmu CLK_SCLK_UART0>;
+	assigned-clock-rates = <100000000>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4330-bt";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bten &btwake &bthostwake>;
+		max-speed = <3000000>;
+		shutdown-gpios = <&gpx1 7 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpx3 6 GPIO_ACTIVE_HIGH>;
+		clocks = <&s2mps14_osc S2MPS11_CLK_BT>;
+	};
+};
+
 &tmu {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index 044e5da64a76..d3fb45a56527 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -418,33 +418,26 @@
 			status = "disabled";
 		};
 
-		amba {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			pdma0: pdma@12680000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0x12680000 0x1000>;
-				interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&cmu CLK_PDMA0>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-			};
-
-			pdma1: pdma@12690000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0x12690000 0x1000>;
-				interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&cmu CLK_PDMA1>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-			};
+		pdma0: pdma@12680000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x12680000 0x1000>;
+			interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_PDMA0>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
+		};
+
+		pdma1: pdma@12690000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x12690000 0x1000>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_PDMA1>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
 		};
 
 		adc: adc@126c0000 {
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index d2779a790ce3..a1e54449f33f 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -669,45 +669,37 @@
 			status = "disabled";
 		};
 
-		amba: amba {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			interrupt-parent = <&gic>;
-			ranges;
-
-			pdma0: pdma@12680000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0x12680000 0x1000>;
-				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clock CLK_PDMA0>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-			};
-
-			pdma1: pdma@12690000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0x12690000 0x1000>;
-				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clock CLK_PDMA1>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-			};
-
-			mdma1: mdma@12850000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0x12850000 0x1000>;
-				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clock CLK_MDMA>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <1>;
-			};
+		pdma0: pdma@12680000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x12680000 0x1000>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_PDMA0>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
+		};
+
+		pdma1: pdma@12690000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x12690000 0x1000>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_PDMA1>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
+		};
+
+		mdma1: mdma@12850000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x12850000 0x1000>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_MDMA>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <1>;
 		};
 
 		fimd: fimd@11c00000 {
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index 3d791db6095c..5cc96f04a4fa 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -30,62 +30,58 @@
 		stdout-path = "serial2:115200n8";
 	};
 
-	regulators {
-		compatible = "simple-bus";
-
-		vemmc_reg: regulator-0 {
-			compatible = "regulator-fixed";
-			regulator-name = "VMEM_VDD_2.8V";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	vemmc_reg: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VMEM_VDD_2.8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-		tsp_reg: regulator-1 {
-			compatible = "regulator-fixed";
-			regulator-name = "TSP_FIXED_VOLTAGES";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpl0 3 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	tsp_reg: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "TSP_FIXED_VOLTAGES";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpl0 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-		cam_af_28v_reg: regulator-2 {
-			compatible = "regulator-fixed";
-			regulator-name = "8M_AF_2.8V_EN";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpk1 1 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	cam_af_28v_reg: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "8M_AF_2.8V_EN";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpk1 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-		cam_io_en_reg: regulator-3 {
-			compatible = "regulator-fixed";
-			regulator-name = "CAM_IO_EN";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpe2 1 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	cam_io_en_reg: regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "CAM_IO_EN";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpe2 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-		cam_io_12v_reg: regulator-4 {
-			compatible = "regulator-fixed";
-			regulator-name = "8M_1.2V_EN";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			gpio = <&gpe2 5 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	cam_io_12v_reg: regulator-4 {
+		compatible = "regulator-fixed";
+		regulator-name = "8M_1.2V_EN";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		gpio = <&gpe2 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-		vt_core_15v_reg: regulator-5 {
-			compatible = "regulator-fixed";
-			regulator-name = "VT_CORE_1.5V";
-			regulator-min-microvolt = <1500000>;
-			regulator-max-microvolt = <1500000>;
-			gpio = <&gpe2 2 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	vt_core_15v_reg: regulator-5 {
+		compatible = "regulator-fixed";
+		regulator-name = "VT_CORE_1.5V";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&gpe2 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 	};
 
 	gpio-keys {
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
index 02fde1a75ebd..99ce53b120ac 100644
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -181,20 +181,6 @@
 	};
 };
 
-&amba {
-	mdma0: mdma@12840000 {
-		compatible = "arm,pl330", "arm,primecell";
-		reg = <0x12840000 0x1000>;
-		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clock CLK_MDMA>;
-		clock-names = "apb_pclk";
-		#dma-cells = <1>;
-		#dma-channels = <8>;
-		#dma-requests = <1>;
-		power-domains = <&pd_lcd0>;
-	};
-};
-
 &camera {
 	status = "okay";
 
@@ -616,6 +602,20 @@
 	/delete-property/dma-names;
 };
 
+&soc {
+	mdma0: mdma@12840000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0x12840000 0x1000>;
+		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clock CLK_MDMA>;
+		clock-names = "apb_pclk";
+		#dma-cells = <1>;
+		#dma-channels = <8>;
+		#dma-requests = <1>;
+		power-domains = <&pd_lcd0>;
+	};
+};
+
 &sysram {
 	smp-sram@0 {
 		status = "disabled";
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index b4466232f0c1..33435ce79ce4 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -97,7 +97,7 @@
 			label = "LCD1";
 		};
 
-		l2c: l2-cache-controller@10502000 {
+		l2c: cache-controller@10502000 {
 			compatible = "arm,pl310-cache";
 			reg = <0x10502000 0x1000>;
 			cache-unified;
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
index dc865be40751..8b11ad391252 100644
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -33,20 +33,13 @@
 		reg = <0x0203F000 0x1000>;
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		mmc_reg: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "VMEM_VDD_2.8V";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	mmc_reg: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VMEM_VDD_2.8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 	};
 
 	display-timings {
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index 48868947373e..7002832eb4c0 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -213,7 +213,7 @@
 			label = "ISP";
 		};
 
-		l2c: l2-cache-controller@10502000 {
+		l2c: cache-controller@10502000 {
 			compatible = "arm,pl310-cache";
 			reg = <0x10502000 0x1000>;
 			cache-unified;
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index c4cc7611898c..59872d83da6e 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -84,60 +84,48 @@
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		main_dc_reg: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "MAIN_DC";
-			regulator-always-on;
-		};
+	main_dc_reg: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "MAIN_DC";
+		regulator-always-on;
+	};
 
-		mmc_reg: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "VDD_MMC";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			regulator-always-on;
-		};
+	mmc_reg: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_MMC";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-always-on;
+	};
 
-		reg_hdmi_en: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "hdmi-en";
-			regulator-always-on;
-		};
+	reg_hdmi_en: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "hdmi-en";
+		regulator-always-on;
+	};
 
-		vcc_1v2_reg: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "VCC_1V2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-always-on;
-		};
+	vcc_1v2_reg: regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+	};
 
-		vcc_1v8_reg: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "VCC_1V8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
+	vcc_1v8_reg: regulator-4 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
 
-		vcc_3v3_reg: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			regulator-name = "VCC_3V3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
+	vcc_3v3_reg: regulator-5 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
 	};
 
 	sound {
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index b6135af7ef39..e3dbe4166836 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -679,56 +679,48 @@
 			samsung,pmureg-phandle = <&pmu_system_controller>;
 		};
 
-		amba {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			interrupt-parent = <&gic>;
-			ranges;
-
-			pdma0: pdma@121a0000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0x121A0000 0x1000>;
-				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clock CLK_PDMA0>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-			};
-
-			pdma1: pdma@121b0000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0x121B0000 0x1000>;
-				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clock CLK_PDMA1>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-			};
-
-			mdma0: mdma@10800000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0x10800000 0x1000>;
-				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clock CLK_MDMA0>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <1>;
-			};
-
-			mdma1: mdma@11c10000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0x11C10000 0x1000>;
-				interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clock CLK_MDMA1>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <1>;
-			};
+		pdma0: pdma@121a0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x121A0000 0x1000>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_PDMA0>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
+		};
+
+		pdma1: pdma@121b0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x121B0000 0x1000>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_PDMA1>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
+		};
+
+		mdma0: mdma@10800000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x10800000 0x1000>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_MDMA0>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <1>;
+		};
+
+		mdma1: mdma@11c10000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x11C10000 0x1000>;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_MDMA1>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <1>;
 		};
 
 		gsc_0:  gsc@13e00000 {
diff --git a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
index 369a8a7f2105..e5d0a2a4f648 100644
--- a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
@@ -3,7 +3,7 @@
  * Exynos5410 SoC pin-mux and pin-config device tree source
  *
  * Copyright (c) 2013 Hardkernel Co., Ltd.
- *              http://www.hardkernel.com
+ *              https://www.hardkernel.com
  */
 
 #include <dt-bindings/pinctrl/samsung.h>
diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index 2eab80bf5f3a..abe75b9e39f5 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -189,34 +189,26 @@
 			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		amba {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			interrupt-parent = <&gic>;
-			ranges;
-
-			pdma0: pdma@121a0000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0x121a0000 0x1000>;
-				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clock CLK_PDMA0>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-			};
+		pdma0: pdma@121a0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x121a0000 0x1000>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_PDMA0>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
+		};
 
-			pdma1: pdma@121b0000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0x121b0000 0x1000>;
-				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clock CLK_PDMA1>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-			};
+		pdma1: pdma@121b0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x121b0000 0x1000>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_PDMA1>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
 		};
 
 		audi2s0: i2s@3830000 {
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
index e3f2afe8359a..83fa800fa1eb 100644
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -32,40 +32,31 @@
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vdd: fixed-regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "vdd-supply";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
+	vdd: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-supply";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
 
-		dbvdd: fixed-regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "dbvdd-supply";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
+	dbvdd: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "dbvdd-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
 
-		spkvdd: fixed-regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "spkvdd-supply";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
+	spkvdd: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "spkvdd-supply";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
 	};
 
-	usb300_vbus_reg: regulator-usb300 {
+	usb300_vbus_reg: regulator-3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VBUS0";
 		regulator-min-microvolt = <5000000>;
@@ -76,7 +67,7 @@
 		enable-active-high;
 	};
 
-	usb301_vbus_reg: regulator-usb301 {
+	usb301_vbus_reg: regulator-4 {
 		compatible = "regulator-fixed";
 		regulator-name = "VBUS1";
 		regulator-min-microvolt = <5000000>;
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index b672080e7469..c76460b70532 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -433,76 +433,68 @@
 			power-domains = <&mau_pd>;
 		};
 
-		amba {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			interrupt-parent = <&gic>;
-			ranges;
-
-			adma: adma@3880000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0x03880000 0x1000>;
-				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clock_audss EXYNOS_ADMA>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <6>;
-				#dma-requests = <16>;
-				power-domains = <&mau_pd>;
-			};
-
-			pdma0: pdma@121a0000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0x121A0000 0x1000>;
-				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clock CLK_PDMA0>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-			};
-
-			pdma1: pdma@121b0000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0x121B0000 0x1000>;
-				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clock CLK_PDMA1>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-			};
-
-			mdma0: mdma@10800000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0x10800000 0x1000>;
-				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clock CLK_MDMA0>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <1>;
-			};
+		adma: adma@3880000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x03880000 0x1000>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock_audss EXYNOS_ADMA>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <6>;
+			#dma-requests = <16>;
+			power-domains = <&mau_pd>;
+		};
 
-			mdma1: mdma@11c10000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0x11C10000 0x1000>;
-				interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clock CLK_MDMA1>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <1>;
-				/*
-				 * MDMA1 can support both secure and non-secure
-				 * AXI transactions. When this is enabled in
-				 * the kernel for boards that run in secure
-				 * mode, we are getting imprecise external
-				 * aborts causing the kernel to oops.
-				 */
-				status = "disabled";
-			};
+		pdma0: pdma@121a0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x121A0000 0x1000>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_PDMA0>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
+		};
+
+		pdma1: pdma@121b0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x121B0000 0x1000>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_PDMA1>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
+		};
+
+		mdma0: mdma@10800000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x10800000 0x1000>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_MDMA0>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <1>;
+		};
+
+		mdma1: mdma@11c10000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x11C10000 0x1000>;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_MDMA1>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <1>;
+			/*
+			 * MDMA1 can support both secure and non-secure
+			 * AXI transactions. When this is enabled in
+			 * the kernel for boards that run in secure
+			 * mode, we are getting imprecise external
+			 * aborts causing the kernel to oops.
+			 */
+			status = "disabled";
 		};
 
 		i2s0: i2s@3830000 {
diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
index ab27ff8bc3dc..afe090578e8f 100644
--- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
@@ -411,12 +411,6 @@
 	status = "okay";
 };
 
-&bus_fsys {
-	operating-points-v2 = <&bus_fsys2_opp_table>;
-	devfreq = <&bus_wcore>;
-	status = "okay";
-};
-
 &bus_fsys2 {
 	operating-points-v2 = <&bus_fsys2_opp_table>;
 	devfreq = <&bus_wcore>;
diff --git a/arch/arm/boot/dts/exynos5800.dtsi b/arch/arm/boot/dts/exynos5800.dtsi
index dfb99ab53c3e..526729dad53f 100644
--- a/arch/arm/boot/dts/exynos5800.dtsi
+++ b/arch/arm/boot/dts/exynos5800.dtsi
@@ -23,17 +23,17 @@
 &cluster_a15_opp_table {
 	opp-2000000000 {
 		opp-hz = /bits/ 64 <2000000000>;
-		opp-microvolt = <1312500>;
+		opp-microvolt = <1312500 1312500 1500000>;
 		clock-latency-ns = <140000>;
 	};
 	opp-1900000000 {
 		opp-hz = /bits/ 64 <1900000000>;
-		opp-microvolt = <1262500>;
+		opp-microvolt = <1262500 1262500 1500000>;
 		clock-latency-ns = <140000>;
 	};
 	opp-1800000000 {
 		opp-hz = /bits/ 64 <1800000000>;
-		opp-microvolt = <1237500>;
+		opp-microvolt = <1237500 1237500 1500000>;
 		clock-latency-ns = <140000>;
 	};
 	opp-1700000000 {
diff --git a/arch/arm/boot/dts/hi3620.dtsi b/arch/arm/boot/dts/hi3620.dtsi
index 9c207a690df5..f0af1bf2b4d8 100644
--- a/arch/arm/boot/dts/hi3620.dtsi
+++ b/arch/arm/boot/dts/hi3620.dtsi
@@ -71,7 +71,7 @@
 		interrupt-parent = <&gic>;
 		ranges = <0 0xfc000000 0x2000000>;
 
-		L2: l2-cache {
+		L2: cache-controller {
 			compatible = "arm,pl310-cache";
 			reg = <0x100000 0x100000>;
 			interrupts = <0 15 4>;
diff --git a/arch/arm/boot/dts/hisi-x5hd2.dtsi b/arch/arm/boot/dts/hisi-x5hd2.dtsi
index 696e6982a688..3ee7967c202d 100644
--- a/arch/arm/boot/dts/hisi-x5hd2.dtsi
+++ b/arch/arm/boot/dts/hisi-x5hd2.dtsi
@@ -381,7 +381,7 @@
 			interrupts = <1 13 0xf01>;
 		};
 
-		l2: l2-cache {
+		l2: cache-controller {
 			compatible = "arm,pl310-cache";
 			reg = <0x00a10000 0x100000>;
 			interrupts = <0 15 4>;
diff --git a/arch/arm/boot/dts/imx1.dtsi b/arch/arm/boot/dts/imx1.dtsi
index b30448cde582..9b940987864c 100644
--- a/arch/arm/boot/dts/imx1.dtsi
+++ b/arch/arm/boot/dts/imx1.dtsi
@@ -125,7 +125,7 @@
 			};
 
 			pwm: pwm@208000 {
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				compatible = "fsl,imx1-pwm";
 				reg = <0x00208000 0x1000>;
 				interrupts = <34>;
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
index c5edff381213..18289f6fb1f3 100644
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -442,7 +442,7 @@
 				status = "disabled";
 			};
 
-			ocotp@8002c000 {
+			efuse@8002c000 {
 				compatible = "fsl,imx23-ocotp", "fsl,ocotp";
 				#address-cells = <1>;
 				#size-cells = <1>;
diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
index 1123e683025c..1ab19f1268f8 100644
--- a/arch/arm/boot/dts/imx25.dtsi
+++ b/arch/arm/boot/dts/imx25.dtsi
@@ -411,7 +411,7 @@
 
 			pwm2: pwm@53fa0000 {
 				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				reg = <0x53fa0000 0x4000>;
 				clocks = <&clks 106>, <&clks 52>;
 				clock-names = "ipg", "per";
@@ -430,7 +430,7 @@
 
 			pwm3: pwm@53fa8000 {
 				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				reg = <0x53fa8000 0x4000>;
 				clocks = <&clks 107>, <&clks 52>;
 				clock-names = "ipg", "per";
@@ -453,7 +453,7 @@
 				interrupts = <22>;
 			};
 
-			esdhc1: esdhc@53fb4000 {
+			esdhc1: mmc@53fb4000 {
 				compatible = "fsl,imx25-esdhc";
 				reg = <0x53fb4000 0x4000>;
 				interrupts = <9>;
@@ -462,7 +462,7 @@
 				status = "disabled";
 			};
 
-			esdhc2: esdhc@53fb8000 {
+			esdhc2: mmc@53fb8000 {
 				compatible = "fsl,imx25-esdhc";
 				reg = <0x53fb8000 0x4000>;
 				interrupts = <8>;
@@ -488,7 +488,7 @@
 
 			pwm4: pwm@53fc8000 {
 				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				reg = <0x53fc8000 0x4000>;
 				clocks = <&clks 108>, <&clks 52>;
 				clock-names = "ipg", "per";
@@ -535,14 +535,14 @@
 
 			pwm1: pwm@53fe0000 {
 				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				reg = <0x53fe0000 0x4000>;
 				clocks = <&clks 105>, <&clks 52>;
 				clock-names = "ipg", "per";
 				interrupts = <26>;
 			};
 
-			iim: iim@53ff0000 {
+			iim: efuse@53ff0000 {
 				compatible = "fsl,imx25-iim", "fsl,imx27-iim";
 				reg = <0x53ff0000 0x4000>;
 				interrupts = <19>;
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index 002cd223f22d..fc0b318f8733 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -134,7 +134,7 @@
 			};
 
 			pwm: pwm@10006000 {
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				compatible = "fsl,imx27-pwm";
 				reg = <0x10006000 0x1000>;
 				interrupts = <23>;
@@ -265,7 +265,7 @@
 				status = "disabled";
 			};
 
-			sdhci1: sdhci@10013000 {
+			sdhci1: mmc@10013000 {
 				compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
 				reg = <0x10013000 0x1000>;
 				interrupts = <11>;
@@ -277,7 +277,7 @@
 				status = "disabled";
 			};
 
-			sdhci2: sdhci@10014000 {
+			sdhci2: mmc@10014000 {
 				compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
 				reg = <0x10014000 0x1000>;
 				interrupts = <10>;
@@ -431,7 +431,7 @@
 				status = "disabled";
 			};
 
-			sdhci3: sdhci@1001e000 {
+			sdhci3: mmc@1001e000 {
 				compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
 				reg = <0x1001e000 0x1000>;
 				interrupts = <9>;
@@ -540,7 +540,7 @@
 				#clock-cells = <1>;
 			};
 
-			iim: iim@10028000 {
+			iim: efuse@10028000 {
 				compatible = "fsl,imx27-iim";
 				reg = <0x10028000 0x1000>;
 				interrupts = <62>;
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index a1cbbeb39a4f..a2b799c56f8f 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -1011,7 +1011,7 @@
 				status = "disabled";
 			};
 
-			ocotp: ocotp@8002c000 {
+			ocotp: efuse@8002c000 {
 				compatible = "fsl,imx28-ocotp", "fsl,ocotp";
 				#address-cells = <1>;
 				#size-cells = <1>;
diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi
index 18270ec648fe..45333f7e10ea 100644
--- a/arch/arm/boot/dts/imx31.dtsi
+++ b/arch/arm/boot/dts/imx31.dtsi
@@ -173,7 +173,7 @@
 			reg = <0x50000000 0x100000>;
 			ranges;
 
-			sdhci1: sdhci@50004000 {
+			sdhci1: mmc@50004000 {
 				compatible = "fsl,imx31-mmc";
 				reg = <0x50004000 0x4000>;
 				interrupts = <9>;
@@ -184,7 +184,7 @@
 				status = "disabled";
 			};
 
-			sdhci2: sdhci@50008000 {
+			sdhci2: mmc@50008000 {
 				compatible = "fsl,imx31-mmc";
 				reg = <0x50008000 0x4000>;
 				interrupts = <8>;
@@ -217,7 +217,7 @@
 				status = "disabled";
 			};
 
-			iim: iim@5001c000 {
+			iim: efuse@5001c000 {
 				compatible = "fsl,imx31-iim", "fsl,imx27-iim";
 				reg = <0x5001c000 0x1000>;
 				interrupts = <19>;
@@ -327,7 +327,7 @@
 				interrupts = <26>;
 				clocks = <&clks 10>, <&clks 42>;
 				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 		};
diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi
index 2ebf2c1fa682..aba16252faab 100644
--- a/arch/arm/boot/dts/imx35.dtsi
+++ b/arch/arm/boot/dts/imx35.dtsi
@@ -59,7 +59,7 @@
 		interrupt-parent = <&avic>;
 		ranges;
 
-		L2: l2-cache@30000000 {
+		L2: cache-controller@30000000 {
 			compatible = "arm,l210-cache";
 			reg = <0x30000000 0x1000>;
 			cache-unified;
@@ -231,7 +231,7 @@
 				#interrupt-cells = <2>;
 			};
 
-			esdhc1: esdhc@53fb4000 {
+			esdhc1: mmc@53fb4000 {
 				compatible = "fsl,imx35-esdhc";
 				reg = <0x53fb4000 0x4000>;
 				interrupts = <7>;
@@ -240,7 +240,7 @@
 				status = "disabled";
 			};
 
-			esdhc2: esdhc@53fb8000 {
+			esdhc2: mmc@53fb8000 {
 				compatible = "fsl,imx35-esdhc";
 				reg = <0x53fb8000 0x4000>;
 				interrupts = <8>;
@@ -249,7 +249,7 @@
 				status = "disabled";
 			};
 
-			esdhc3: esdhc@53fbc000 {
+			esdhc3: mmc@53fbc000 {
 				compatible = "fsl,imx35-esdhc";
 				reg = <0x53fbc000 0x4000>;
 				interrupts = <9>;
@@ -320,7 +320,7 @@
 				status = "disabled";
 			};
 
-			iim@53ff0000 {
+			efuse@53ff0000 {
 				compatible = "fsl,imx35-iim";
 				reg = <0x53ff0000 0x4000>;
 				interrupts = <19>;
diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi
index 1f4ecbca5225..b6b2e6af9b96 100644
--- a/arch/arm/boot/dts/imx50.dtsi
+++ b/arch/arm/boot/dts/imx50.dtsi
@@ -115,7 +115,7 @@
 				reg = <0x50000000 0x40000>;
 				ranges;
 
-				esdhc1: esdhc@50004000 {
+				esdhc1: mmc@50004000 {
 					compatible = "fsl,imx50-esdhc", "fsl,imx53-esdhc";
 					reg = <0x50004000 0x4000>;
 					interrupts = <1>;
@@ -127,7 +127,7 @@
 					status = "disabled";
 				};
 
-				esdhc2: esdhc@50008000 {
+				esdhc2: mmc@50008000 {
 					compatible = "fsl,imx50-esdhc", "fsl,imx53-esdhc";
 					reg = <0x50008000 0x4000>;
 					interrupts = <2>;
@@ -176,7 +176,7 @@
 					status = "disabled";
 				};
 
-				esdhc3: esdhc@50020000 {
+				esdhc3: mmc@50020000 {
 					compatible = "fsl,imx50-esdhc", "fsl,imx53-esdhc";
 					reg = <0x50020000 0x4000>;
 					interrupts = <3>;
@@ -188,7 +188,7 @@
 					status = "disabled";
 				};
 
-				esdhc4: esdhc@50024000 {
+				esdhc4: mmc@50024000 {
 					compatible = "fsl,imx50-esdhc", "fsl,imx53-esdhc";
 					reg = <0x50024000 0x4000>;
 					interrupts = <4>;
@@ -289,7 +289,7 @@
 			};
 
 			pwm1: pwm@53fb4000 {
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				compatible = "fsl,imx50-pwm", "fsl,imx27-pwm";
 				reg = <0x53fb4000 0x4000>;
 				clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
@@ -299,7 +299,7 @@
 			};
 
 			pwm2: pwm@53fb8000 {
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				compatible = "fsl,imx50-pwm", "fsl,imx27-pwm";
 				reg = <0x53fb8000 0x4000>;
 				clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
diff --git a/arch/arm/boot/dts/imx51-ts4800.dts b/arch/arm/boot/dts/imx51-ts4800.dts
index 4344632f7940..6ecb83e7f336 100644
--- a/arch/arm/boot/dts/imx51-ts4800.dts
+++ b/arch/arm/boot/dts/imx51-ts4800.dts
@@ -113,6 +113,7 @@
 };
 
 &pwm1 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm_backlight>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index d3583aad8323..985e1be03ad6 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -185,7 +185,7 @@
 				reg = <0x70000000 0x40000>;
 				ranges;
 
-				esdhc1: esdhc@70004000 {
+				esdhc1: mmc@70004000 {
 					compatible = "fsl,imx51-esdhc";
 					reg = <0x70004000 0x4000>;
 					interrupts = <1>;
@@ -196,7 +196,7 @@
 					status = "disabled";
 				};
 
-				esdhc2: esdhc@70008000 {
+				esdhc2: mmc@70008000 {
 					compatible = "fsl,imx51-esdhc";
 					reg = <0x70008000 0x4000>;
 					interrupts = <2>;
@@ -245,7 +245,7 @@
 					status = "disabled";
 				};
 
-				esdhc3: esdhc@70020000 {
+				esdhc3: mmc@70020000 {
 					compatible = "fsl,imx51-esdhc";
 					reg = <0x70020000 0x4000>;
 					interrupts = <3>;
@@ -257,7 +257,7 @@
 					status = "disabled";
 				};
 
-				esdhc4: esdhc@70024000 {
+				esdhc4: mmc@70024000 {
 					compatible = "fsl,imx51-esdhc";
 					reg = <0x70024000 0x4000>;
 					interrupts = <4>;
@@ -400,7 +400,7 @@
 			};
 
 			pwm1: pwm@73fb4000 {
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				compatible = "fsl,imx51-pwm", "fsl,imx27-pwm";
 				reg = <0x73fb4000 0x4000>;
 				clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
@@ -410,7 +410,7 @@
 			};
 
 			pwm2: pwm@73fb8000 {
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				compatible = "fsl,imx51-pwm", "fsl,imx27-pwm";
 				reg = <0x73fb8000 0x4000>;
 				clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
@@ -466,7 +466,7 @@
 				reg = <0x83f00000 0x60>;
 			};
 
-			iim: iim@83f98000 {
+			iim: efuse@83f98000 {
 				compatible = "fsl,imx51-iim", "fsl,imx27-iim";
 				reg = <0x83f98000 0x4000>;
 				interrupts = <69>;
diff --git a/arch/arm/boot/dts/imx53-kp.dtsi b/arch/arm/boot/dts/imx53-kp.dtsi
index 8b25416a5303..4508f34139a0 100644
--- a/arch/arm/boot/dts/imx53-kp.dtsi
+++ b/arch/arm/boot/dts/imx53-kp.dtsi
@@ -162,6 +162,14 @@
 	>;
 };
 
+&pwm1 {
+	#pwm-cells = <2>;
+};
+
+&pwm2 {
+	#pwm-cells = <2>;
+};
+
 &uart1 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts
index daab56abe94a..a1a6228d1aa6 100644
--- a/arch/arm/boot/dts/imx53-m53evk.dts
+++ b/arch/arm/boot/dts/imx53-m53evk.dts
@@ -321,6 +321,7 @@
 };
 
 &pwm1 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx53-ppd.dts b/arch/arm/boot/dts/imx53-ppd.dts
index 5ff9a179c83c..f7dcdf96e5c0 100644
--- a/arch/arm/boot/dts/imx53-ppd.dts
+++ b/arch/arm/boot/dts/imx53-ppd.dts
@@ -176,7 +176,7 @@
 		power-supply = <&reg_3v3_lcd>;
 	};
 
-	leds {
+	leds-brightness {
 		compatible = "pwm-leds";
 
 		alarm-brightness {
@@ -185,6 +185,32 @@
 		};
 	};
 
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_alarmled_pins>;
+
+		alarm1 {
+			label = "alarm:red";
+			gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		alarm2 {
+			label = "alarm:yellow";
+			gpios = <&gpio7 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		alarm3 {
+			label = "alarm:blue";
+			gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		alarm4 {
+			label = "alarm:silenced";
+			gpios = <&gpio7 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
 	gpio-poweroff {
 		compatible = "gpio-poweroff";
 		gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>;
@@ -598,12 +624,14 @@
 };
 
 &pwm1 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
 };
 
 &pwm2 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm2>;
 	status = "okay";
@@ -909,18 +937,10 @@
 			MX53_PAD_NANDF_CS3__GPIO6_16		0x0
 			/* POWER_AND_BOOT_STATUS_INDICATOR */
 			MX53_PAD_PATA_INTRQ__GPIO7_2		0x1e4
-			/* ACTIVATE_ALARM_LIGHT_RED */
-			MX53_PAD_PATA_DIOR__GPIO7_3		0x0
-			/* ACTIVATE_ALARM_LIGHT_YELLOW */
-			MX53_PAD_PATA_DA_1__GPIO7_7		0x0
-			/* ACTIVATE_ALARM_LIGHT_CYAN */
-			MX53_PAD_PATA_DA_2__GPIO7_8		0x0
 			/* RUNNING_ON_BATTERY_INDICATOR_GREEN */
 			MX53_PAD_GPIO_16__GPIO7_11		0x0
 			/* BATTERY_STATUS_INDICATOR_AMBER */
 			MX53_PAD_GPIO_17__GPIO7_12		0x0
-			/* AUDIO_ALARMS_SILENCED_INDICATOR */
-			MX53_PAD_GPIO_18__GPIO7_13		0x0
 		>;
 	};
 
@@ -1080,4 +1100,17 @@
 			MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC	0x180
 		>;
 	};
+
+	pinctrl_alarmled_pins: qmx6alarmledgrp {
+		fsl,pins = <
+			/* ACTIVATE_ALARM_LIGHT_RED */
+			MX53_PAD_PATA_DIOR__GPIO7_3		0x0
+			/* ACTIVATE_ALARM_LIGHT_YELLOW */
+			MX53_PAD_PATA_DA_1__GPIO7_7		0x0
+			/* ACTIVATE_ALARM_LIGHT_CYAN */
+			MX53_PAD_PATA_DA_2__GPIO7_8		0x0
+			/* AUDIO_ALARMS_SILENCED_INDICATOR */
+			MX53_PAD_GPIO_18__GPIO7_13		0x0
+		>;
+	};
 };
diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi
index ea90fd95ad01..9a6cb138adf3 100644
--- a/arch/arm/boot/dts/imx53-tqma53.dtsi
+++ b/arch/arm/boot/dts/imx53-tqma53.dtsi
@@ -209,6 +209,14 @@
 	};
 };
 
+&pwm1 {
+	#pwm-cells = <2>;
+};
+
+&pwm2 {
+	#pwm-cells = <2>;
+};
+
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi
index 4ab135906949..7c9730f3f820 100644
--- a/arch/arm/boot/dts/imx53-tx53.dtsi
+++ b/arch/arm/boot/dts/imx53-tx53.dtsi
@@ -542,7 +542,6 @@
 &pwm2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm2>;
-	#pwm-cells = <3>;
 };
 
 &sdma {
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index afa57bf7b0ed..500eeaa3a27c 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -236,7 +236,7 @@
 				reg = <0x50000000 0x40000>;
 				ranges;
 
-				esdhc1: esdhc@50004000 {
+				esdhc1: mmc@50004000 {
 					compatible = "fsl,imx53-esdhc";
 					reg = <0x50004000 0x4000>;
 					interrupts = <1>;
@@ -248,7 +248,7 @@
 					status = "disabled";
 				};
 
-				esdhc2: esdhc@50008000 {
+				esdhc2: mmc@50008000 {
 					compatible = "fsl,imx53-esdhc";
 					reg = <0x50008000 0x4000>;
 					interrupts = <2>;
@@ -301,7 +301,7 @@
 					status = "disabled";
 				};
 
-				esdhc3: esdhc@50020000 {
+				esdhc3: mmc@50020000 {
 					compatible = "fsl,imx53-esdhc";
 					reg = <0x50020000 0x4000>;
 					interrupts = <3>;
@@ -313,7 +313,7 @@
 					status = "disabled";
 				};
 
-				esdhc4: esdhc@50024000 {
+				esdhc4: mmc@50024000 {
 					compatible = "fsl,imx53-esdhc";
 					reg = <0x50024000 0x4000>;
 					interrupts = <4>;
@@ -525,7 +525,7 @@
 			};
 
 			pwm1: pwm@53fb4000 {
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
 				reg = <0x53fb4000 0x4000>;
 				clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
@@ -535,7 +535,7 @@
 			};
 
 			pwm2: pwm@53fb8000 {
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
 				reg = <0x53fb8000 0x4000>;
 				clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
@@ -667,7 +667,7 @@
 				reg = <0x63f00000 0x60>;
 			};
 
-			iim: iim@63f98000 {
+			iim: efuse@63f98000 {
 				compatible = "fsl,imx53-iim", "fsl,imx27-iim";
 				reg = <0x63f98000 0x4000>;
 				interrupts = <69>;
diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts
index 37f80ab8ccd0..809ca5611072 100644
--- a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts
+++ b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts
@@ -79,5 +79,6 @@
 };
 
 &pwm1 {
+	#pwm-cells = <2>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_7.dts b/arch/arm/boot/dts/imx6dl-aristainetos_7.dts
index 8d8c8c27e482..4d58cb4436d9 100644
--- a/arch/arm/boot/dts/imx6dl-aristainetos_7.dts
+++ b/arch/arm/boot/dts/imx6dl-aristainetos_7.dts
@@ -69,5 +69,6 @@
 };
 
 &pwm3 {
+	#pwm-cells = <2>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6dl-mamoj.dts b/arch/arm/boot/dts/imx6dl-mamoj.dts
index 385ce7b0029e..028951955bde 100644
--- a/arch/arm/boot/dts/imx6dl-mamoj.dts
+++ b/arch/arm/boot/dts/imx6dl-mamoj.dts
@@ -303,6 +303,7 @@
 };
 
 &pwm3 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6dl-prtrvt.dts b/arch/arm/boot/dts/imx6dl-prtrvt.dts
new file mode 100644
index 000000000000..fa882458957b
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-prtrvt.dts
@@ -0,0 +1,184 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2014 Protonic Holland
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-prti6q.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Protonic RVT board";
+	compatible = "prt,prtrvt", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x10000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-debug0 {
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1 &pinctrl_can1phy>;
+	status = "okay";
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&ecspi3 {
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	status = "okay";
+
+	nfc@0 {
+		compatible = "ti,trf7970a";
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_nfc>;
+		spi-max-frequency = <2000000>;
+		interrupts-extended = <&gpio5 14 IRQ_TYPE_LEVEL_LOW>;
+		ti,enable-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>,
+				  <&gpio5 11 GPIO_ACTIVE_LOW>;
+		vin-supply = <&reg_3v3>;
+		vin-voltage-override = <3100000>;
+		autosuspend-delay = <30000>;
+		irq-status-read-quirk;
+		en2-rf-quirk;
+		t5t-rmb-extra-byte-quirk;
+		status = "okay";
+	};
+};
+
+&i2c3 {
+	adc@49 {
+		compatible = "ti,ads1015";
+		reg = <0x49>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* nc */
+		channel@4 {
+			reg = <4>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+
+		/* nc */
+		channel@5 {
+			reg = <5>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+
+		/* can1_l */
+		channel@6 {
+			reg = <6>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+
+		/* can1_h */
+		channel@7 {
+			reg = <7>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+	};
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "disabled";
+};
+
+&vpu {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_can1phy: can1phy {
+		fsl,pins = <
+			/* CAN1_SR */
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12	0x13070
+			/* CAN1_TERM */
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00	0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			/* CS */
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x000b1
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x000b1
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x1b0b0
+		>;
+	};
+
+	pinctrl_nfc: nfcgrp {
+		fsl,pins = <
+			/* NFC_ASK_OOK */
+			MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09	0x100b1
+			/* NFC_PWR_EN */
+			MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10	0x100b1
+			/* NFC_EN2 */
+			MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11	0x100b1
+			/* NFC_EN */
+			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x100b1
+			/* NFC_MOD */
+			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x100b1
+			/* NFC_IRQ */
+			MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x100b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-prtvt7.dts b/arch/arm/boot/dts/imx6dl-prtvt7.dts
new file mode 100644
index 000000000000..306b4f7bf762
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-prtvt7.dts
@@ -0,0 +1,411 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2016 Protonic Holland
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-prti6q.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	model = "Protonic VT7";
+	compatible = "prt,prtvt7", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+
+	backlight_lcd: backlight-lcd {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		pwms = <&pwm1 0 500000>;
+		brightness-levels = <0 20 81 248 1000>;
+		default-brightness-level = <20>;
+		num-interpolated-steps = <21>;
+		power-supply = <&reg_bl_12v0>;
+		enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		esc {
+			label = "GPIO Key ESC";
+			linux,code = <KEY_ESC>;
+			gpios = <&gpio_pca 0 GPIO_ACTIVE_LOW>;
+		};
+
+		up {
+			label = "GPIO Key UP";
+			linux,code = <KEY_UP>;
+			gpios = <&gpio_pca 1 GPIO_ACTIVE_LOW>;
+		};
+
+		down {
+			label = "GPIO Key DOWN";
+			linux,code = <KEY_DOWN>;
+			gpios = <&gpio_pca 4 GPIO_ACTIVE_LOW>;
+		};
+
+		enter {
+			label = "GPIO Key Enter";
+			linux,code = <KEY_ENTER>;
+			gpios = <&gpio_pca 3 GPIO_ACTIVE_LOW>;
+		};
+
+		cycle {
+			label = "GPIO Key CYCLE";
+			linux,code = <KEY_CYCLEWINDOWS>;
+			gpios = <&gpio_pca 2 GPIO_ACTIVE_LOW>;
+		};
+
+		f1 {
+			label = "GPIO Key F1";
+			linux,code = <KEY_F1>;
+			gpios = <&gpio_pca 14 GPIO_ACTIVE_LOW>;
+		};
+
+		f2 {
+			label = "GPIO Key F2";
+			linux,code = <KEY_F2>;
+			gpios = <&gpio_pca 13 GPIO_ACTIVE_LOW>;
+		};
+
+		f3 {
+			label = "GPIO Key F3";
+			linux,code = <KEY_F3>;
+			gpios = <&gpio_pca 12 GPIO_ACTIVE_LOW>;
+		};
+
+		f4 {
+			label = "GPIO Key F4";
+			linux,code = <KEY_F4>;
+			gpios = <&gpio_pca 11 GPIO_ACTIVE_LOW>;
+		};
+
+		f5 {
+			label = "GPIO Key F5";
+			linux,code = <KEY_F5>;
+			gpios = <&gpio_pca 10 GPIO_ACTIVE_LOW>;
+		};
+
+		f6 {
+			label = "GPIO Key F6";
+			linux,code = <KEY_F6>;
+			gpios = <&gpio_pca 5 GPIO_ACTIVE_LOW>;
+		};
+
+		f7 {
+			label = "GPIO Key F7";
+			linux,code = <KEY_F7>;
+			gpios = <&gpio_pca 6 GPIO_ACTIVE_LOW>;
+		};
+
+		f8 {
+			label = "GPIO Key F8";
+			linux,code = <KEY_F8>;
+			gpios = <&gpio_pca 7 GPIO_ACTIVE_LOW>;
+		};
+
+		f9 {
+			label = "GPIO Key F9";
+			linux,code = <KEY_F9>;
+			gpios = <&gpio_pca 8 GPIO_ACTIVE_LOW>;
+		};
+
+		f10 {
+			label = "GPIO Key F10";
+			linux,code = <KEY_F10>;
+			gpios = <&gpio_pca 9 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-debug0 {
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_bl_12v0: regulator-bl-12v0 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_bl_12v0>;
+		regulator-name = "bl-12v0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "prti6q-sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Line", "Line In Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "External Speaker";
+		simple-audio-card,routing =
+			"MIC_IN", "Microphone Jack",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"External Speaker", "LINE_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+			system-clock-frequency = <0>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+			bitclock-master;
+			frame-master;
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+
+	mux-ssi1 {
+		fsl,audmux-port = <0>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN		0
+			IMX_AUDMUX_V2_PTCR_TFSEL(2)	0
+			IMX_AUDMUX_V2_PTCR_TCSEL(2)	0
+			IMX_AUDMUX_V2_PTCR_TFSDIR	0
+			IMX_AUDMUX_V2_PTCR_TCLKDIR IMX_AUDMUX_V2_PDCR_RXDSEL(2)
+		>;
+	};
+
+	mux-pins3 {
+		fsl,audmux-port = <2>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+			0		       IMX_AUDMUX_V2_PDCR_TXRXEN
+		>;
+	};
+};
+
+&can1 {
+	pinctrl-0 = <&pinctrl_can1 &pinctrl_can1phy>;
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+};
+
+&i2c1 {
+	sgtl5000: audio-codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0xa>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_codec>;
+		#sound-dai-cells = <0>;
+		clocks = <&clks 201>;
+		VDDA-supply = <&reg_3v3>;
+		VDDIO-supply = <&reg_3v3>;
+		VDDD-supply = <&reg_1v8>;
+	};
+};
+
+&i2c3 {
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+
+	gpio_pca: gpio@74 {
+		compatible = "nxp,pca9539";
+		reg = <0x74>;
+		interrupts-extended = <&gpio4 5 IRQ_TYPE_LEVEL_LOW>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+};
+
+&ipu1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi0>;
+	status = "okay";
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&ssi1 {
+	#sound-dai-cells = <0>;
+	fsl,mode = "ac97-slave";
+	status = "okay";
+};
+
+&usbh1 {
+	status = "disabled";
+};
+
+&vpu {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1		0x030b0
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+		>;
+	};
+
+	pinctrl_backlight: backlightgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28	0x1b0b0
+		>;
+	};
+
+	pinctrl_can1phy: can1phy {
+		fsl,pins = <
+			/* CAN1_SR */
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x13070
+			/* CAN1_TERM */
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
+		>;
+	};
+
+	pinctrl_codec: codecgrp {
+		fsl,pins = <
+			/* AUDIO_nRESET */
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x1f0b0
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO		0x100b1
+			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK		0x100b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI		0x100b1
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26		0x000b1
+		>;
+	};
+
+	pinctrl_ipu1_csi0: ipu1csi0grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19	0x1b0b0
+			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0
+			/* ITU656_nRESET */
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+			/* ITU656_nPDN */
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x1b0b0
+		>;
+	};
+
+	pinctrl_ipu1_disp: ipudisp1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0xb0
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15	   0xb0
+
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0xb0
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0xb0
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0xb0
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0xb0
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0xb0
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0xb0
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0xb0
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0xb0
+
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0xb0
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0xb0
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0xb0
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0xb0
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0xb0
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0xb0
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0xb0
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0xb0
+
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0xb0
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0xb0
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0xb0
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0xb0
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0xb0
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0xb0
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0xb0
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0xb0
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x1b0b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT		0x1b0b0
+		>;
+	};
+
+	pinctrl_reg_bl_12v0: 12blgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x1b0b0
+		>;
+	};
+
+	pinctrl_tsc: tscgrp {
+
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x1b0b0
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
index 2b9423d55c37..c4a235d212b6 100644
--- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
+++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
@@ -540,7 +540,6 @@
 };
 
 &pwm1 {
-	#pwm-cells = <3>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "disabled";
diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi
index 37c63402157b..fc81f2f4b62d 100644
--- a/arch/arm/boot/dts/imx6q-ba16.dtsi
+++ b/arch/arm/boot/dts/imx6q-ba16.dtsi
@@ -334,6 +334,7 @@
 };
 
 &pwm1 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts b/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts
index a2dd7e549568..a685b1c3208f 100644
--- a/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts
+++ b/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts
@@ -253,7 +253,6 @@
 &pwm1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
-	#pwm-cells = <3>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6q-display5.dtsi b/arch/arm/boot/dts/imx6q-display5.dtsi
index 83524bb99eb3..fef5d7254536 100644
--- a/arch/arm/boot/dts/imx6q-display5.dtsi
+++ b/arch/arm/boot/dts/imx6q-display5.dtsi
@@ -399,7 +399,6 @@
 };
 
 &pwm2 {
-	#pwm-cells = <3>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm2>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6q-kp.dtsi b/arch/arm/boot/dts/imx6q-kp.dtsi
index 24c8169baf44..1ade0bff681d 100644
--- a/arch/arm/boot/dts/imx6q-kp.dtsi
+++ b/arch/arm/boot/dts/imx6q-kp.dtsi
@@ -378,12 +378,14 @@
 };
 
 &pwm1 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
 };
 
 &pwm2 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm2>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6q-mccmon6.dts b/arch/arm/boot/dts/imx6q-mccmon6.dts
index a4d295455e67..55692c73943d 100644
--- a/arch/arm/boot/dts/imx6q-mccmon6.dts
+++ b/arch/arm/boot/dts/imx6q-mccmon6.dts
@@ -237,7 +237,6 @@
 };
 
 &pwm2 {
-	#pwm-cells = <3>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm2>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6q-novena.dts b/arch/arm/boot/dts/imx6q-novena.dts
index 69f170ff31c5..52e3567d1859 100644
--- a/arch/arm/boot/dts/imx6q-novena.dts
+++ b/arch/arm/boot/dts/imx6q-novena.dts
@@ -455,6 +455,7 @@
 };
 
 &pwm1 {
+	#pwm-cells = <2>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6q-pistachio.dts b/arch/arm/boot/dts/imx6q-pistachio.dts
index a31b17eaf51c..7a33e54cc0f1 100644
--- a/arch/arm/boot/dts/imx6q-pistachio.dts
+++ b/arch/arm/boot/dts/imx6q-pistachio.dts
@@ -570,6 +570,7 @@
 };
 
 &pwm1 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6q-prti6q.dts b/arch/arm/boot/dts/imx6q-prti6q.dts
new file mode 100644
index 000000000000..de6cbaab8b49
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-prti6q.dts
@@ -0,0 +1,543 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2014 Protonic Holland
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-prti6q.dtsi"
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	model = "Protonic PRTI6Q board";
+	compatible = "prt,prti6q", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0xf0000000>;
+	};
+
+	backlight_lcd: backlight-lcd {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 16 64 255>;
+		num-interpolated-steps = <16>;
+		default-brightness-level = <1>;
+		power-supply = <&reg_3v3>;
+		enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+	};
+
+	can_osc: can-osc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-debug0 {
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-debug1 {
+			function = LED_FUNCTION_SD;
+			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "disk-activity";
+		};
+	};
+
+	panel {
+		compatible = "kyo,tcg121xglp";
+		backlight = <&backlight_lcd>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_wifi: regulator-wifi {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_npd>;
+		enable-active-high;
+		gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "regulator-WL12xx";
+		startup-delay-us = <70000>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "prti6q-sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Line", "Line In Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "External Speaker";
+		simple-audio-card,routing =
+			"MIC_IN", "Microphone Jack",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"External Speaker", "LINE_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+			system-clock-frequency = <0>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+			bitclock-master;
+			frame-master;
+		};
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "imx-spdif";
+		spdif-controller = <&spdif>;
+		spdif-in;
+		spdif-out;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+
+	mux-ssi1 {
+		fsl,audmux-port = <0>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN		0
+			IMX_AUDMUX_V2_PTCR_TFSEL(2)	0
+			IMX_AUDMUX_V2_PTCR_TCSEL(2)	0
+			IMX_AUDMUX_V2_PTCR_TFSDIR	0
+			IMX_AUDMUX_V2_PTCR_TCLKDIR IMX_AUDMUX_V2_PDCR_RXDSEL(2)
+		>;
+	};
+
+	mux-pins3 {
+		fsl,audmux-port = <2>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+			0		       IMX_AUDMUX_V2_PDCR_TXRXEN
+		>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+	status = "okay";
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>, <&gpio4 25 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_ecspi2_cs>;
+	status = "okay";
+
+	can@0 {
+		compatible = "microchip,mcp2515";
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can3>;
+		clocks = <&can_osc>;
+		interrupts-extended = <&gpio3 20 IRQ_TYPE_LEVEL_LOW>;
+		spi-max-frequency = <5000000>;
+	};
+
+	adc@1 {
+		compatible = "ti,adc128s052";
+		reg = <1>;
+		spi-max-frequency = <2000000>;
+		vref-supply = <&reg_3v3>;
+	};
+};
+
+&ecspi3 {
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&rgmii_phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Microchip KSZ9031RNX PHY */
+		rgmii_phy: ethernet-phy@4 {
+			reg = <4>;
+			interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <300>;
+		};
+	};
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	sgtl5000: audio-codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0xa>;
+		#sound-dai-cells = <0>;
+		clocks = <&clks 201>;
+		VDDA-supply = <&reg_3v3>;
+		VDDIO-supply = <&reg_3v3>;
+		VDDD-supply = <&reg_1v8>;
+	};
+};
+
+/* DDC */
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	adc@49 {
+		compatible = "ti,ads1015";
+		reg = <0x49>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* can2_l */
+		channel@4 {
+			reg = <4>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+
+		/* can2_h */
+		channel@5 {
+			reg = <5>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+
+		/* can1_l */
+		channel@6 {
+			reg = <6>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+
+		/* can1_h */
+		channel@7 {
+			reg = <7>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&sata {
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif>;
+	status = "okay";
+};
+
+&ssi1 {
+	#sound-dai-cells = <0>;
+	fsl,mode = "ac97-slave";
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-0 = <&pinctrl_usbotg &pinctrl_usbotg_id>;
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	non-removable;
+	vmmc-supply = <&reg_wifi>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	status = "okay";
+
+	wifi {
+		compatible = "ti,wl1271";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi>;
+		interrupts-extended = <&gpio1 30 IRQ_TYPE_LEVEL_HIGH>;
+		ref-clock-frequency = "38400000";
+		tcxo-clock-frequency = "19200000";
+	};
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1		0x030b0
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+		>;
+	};
+
+	pinctrl_backlight: backlightgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28	0x1b0b0
+		>;
+	};
+
+	pinctrl_can2: can2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x1b008
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x1b008
+		>;
+	};
+
+	pinctrl_can3: can3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x1b0b1
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			/* CS */
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x000b1
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO		0x100b1
+			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK		0x100b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI		0x100b1
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26		0x000b1
+		>;
+	};
+
+	pinctrl_ecspi2_cs: ecspi2csgrp {
+		fsl,pins = <
+			/* ADC128S022 CS */
+			MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25	0x1b0b1
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x000b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x10030
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x10030
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x10030
+
+			/* Phy reset */
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b1
+		>;
+	};
+
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			/* NOTE: DDC is done via I2C2, so DON'T
+			 * configure DDC pins for HDMI!
+			 */
+			MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE	0x1f8b0
+		>;
+	};
+
+	/* DDC */
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x1b0b0
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x1b0b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__PWM1_OUT		0x1b0b0
+		>;
+	};
+
+	pinctrl_spdif: spdifgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_16__SPDIF_IN		0x1b0b0
+			MX6QDL_PAD_GPIO_19__SPDIF_OUT		0x1b0b0
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B	0x1b0b1
+			MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg_id: usbotgidgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x1f058
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170b9
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100b9
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
+		>;
+	};
+
+	pinctrl_wifi: wifigrp {
+		fsl,pins = <
+			/* WL12xx IRQ */
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x10880
+		>;
+	};
+
+	pinctrl_wifi_npd: wifinpd {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b8b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-prtwd2.dts b/arch/arm/boot/dts/imx6q-prtwd2.dts
new file mode 100644
index 000000000000..dffafbcaa7af
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-prtwd2.dts
@@ -0,0 +1,188 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2018 Protonic Holland
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-prti6q.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Protonic WD2 board";
+	compatible = "prt,prtwd2", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	usdhc2_wifi_pwrseq: usdhc2_wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_npd>;
+		reset-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>;
+	};
+
+	/* PRTWD2 rev 1 bitbang I2C for Ethernet Switch */
+	i2c@4 {
+		compatible = "i2c-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c4>;
+		sda-gpios = <&gpio1 22 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
+		i2c-gpio,delay-us = <20>;	/* ~10 kHz */
+		i2c-gpio,scl-output-only;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1 &pinctrl_can1phy>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rmii";
+	clocks = <&clks IMX6QDL_CLK_ENET>,
+		 <&clks IMX6QDL_CLK_ENET>;
+	clock-names = "ipg", "ahb";
+	status = "okay";
+
+	fixed-link {
+		speed = <100>;
+		pause;
+		full-duplex;
+	};
+};
+
+&i2c3 {
+	adc@49 {
+		compatible = "ti,ads1015";
+		reg = <0x49>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* V in */
+		channel@4 {
+			reg = <4>;
+			ti,gain = <1>;
+			ti,datarate = <3>;
+		};
+
+		/* I charge */
+		channel@5 {
+			reg = <5>;
+			ti,gain = <1>;
+			ti,datarate = <3>;
+		};
+
+		/* V bus  */
+		channel@6 {
+			reg = <6>;
+			ti,gain = <1>;
+			ti,datarate = <3>;
+		};
+
+		/* nc */
+		channel@7 {
+			reg = <7>;
+			ti,gain = <1>;
+			ti,datarate = <3>;
+		};
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	no-1-8-v;
+	non-removable;
+	mmc-pwrseq = <&usdhc2_wifi_pwrseq>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_eth_chg>;
+
+	pinctrl_can1phy: can1phy {
+		fsl,pins = <
+			/* CAN1_SR */
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12	0x13070
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			/* MX6QDL_ENET_PINGRP4 */
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x130b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
+
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x1b0b0
+			/* Phy reset */
+			MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22	0x1b0b0
+			/* nINTRP */
+			MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23	0x1b0b0
+
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x10030
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x10030
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__GPIO1_IO22	0x1f8b0
+			MX6QDL_PAD_ENET_MDC__GPIO1_IO31		0x1f8b0
+		>;
+	};
+
+	pinctrl_usb_eth_chg: usbethchggrp {
+		fsl,pins = <
+			/* USB charging control */
+			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x130b0
+			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x130b0
+			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x130b0
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x130b0
+			>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170b9
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100b9
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
+		>;
+	};
+
+	pinctrl_wifi_npd: wifinpd {
+		fsl,pins = <
+			/* WL_REG_ON */
+			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10	0x13069
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts
index bfff87ce2e1f..861e05d53157 100644
--- a/arch/arm/boot/dts/imx6q-tbs2910.dts
+++ b/arch/arm/boot/dts/imx6q-tbs2910.dts
@@ -99,8 +99,20 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii-id";
-	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+	phy-handle = <&phy>;
 	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy: ethernet-phy@4 {
+			reg = <4>;
+			qca,clk-out-frequency = <125000000>;
+			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+		};
+	};
 };
 
 &hdmi {
diff --git a/arch/arm/boot/dts/imx6q-var-dt6customboard.dts b/arch/arm/boot/dts/imx6q-var-dt6customboard.dts
index c54362fcc508..a57c2e3a8435 100644
--- a/arch/arm/boot/dts/imx6q-var-dt6customboard.dts
+++ b/arch/arm/boot/dts/imx6q-var-dt6customboard.dts
@@ -203,6 +203,7 @@
 };
 
 &pwm2 {
+	#pwm-cells = <2>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
index e34be8fabd93..dbdd7db60325 100644
--- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
@@ -371,6 +371,7 @@
 };
 
 &pwm4 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "disabled";
diff --git a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi
index b8e74ab3c993..2577eb4f535a 100644
--- a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi
@@ -211,6 +211,7 @@
 };
 
 &pwm3 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
index 376750882ed3..d38630d4b892 100644
--- a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
@@ -336,6 +336,7 @@
 };
 
 &pwm1 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
index 240b86d2eb71..0930194fd960 100644
--- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
@@ -312,6 +312,7 @@
 
 /* Colibri PWM<A> */
 &pwm3 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
 	status = "disabled";
@@ -362,7 +363,6 @@
 };
 
 &usbotg {
-	pinctrl-names = "default";
 	disable-over-current;
 	dr_mode = "peripheral";
 	status = "disabled";
diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
index e3be453d8a4a..67042793b0ca 100644
--- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
@@ -233,6 +233,7 @@
 };
 
 &pwm1 {
+	#pwm-cells = <2>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-emcon.dtsi b/arch/arm/boot/dts/imx6qdl-emcon.dtsi
index 70d26616d771..35e230f991f1 100644
--- a/arch/arm/boot/dts/imx6qdl-emcon.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-emcon.dtsi
@@ -737,14 +737,17 @@
 };
 
 &pwm1 {
+	#pwm-cells = <2>;
 	status = "okay";
 };
 
 &pwm3 {
+	#pwm-cells = <2>;
 	status = "okay";
 };
 
 &pwm4 {
+	#pwm-cells = <2>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
index 419a7cdc8ab5..7705285d9e3c 100644
--- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
 
 / {
 	/* these are used by bootloader for disabling nodes */
@@ -19,6 +20,53 @@
 		bootargs = "console=ttymxc1,115200";
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -102,6 +150,103 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 GPIO_ACTIVE_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_an1";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
 	eeprom1: eeprom@50 {
 		compatible = "atmel,24c02";
 		reg = <0x50>;
@@ -126,13 +271,6 @@
 		pagesize = <16>;
 	};
 
-	gpio: pca9555@23 {
-		compatible = "nxp,pca9555";
-		reg = <0x23>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
 	rtc: ds1672@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
@@ -387,6 +525,7 @@
 		fsl,pins = <
 			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
 			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x0001b0b0 /* GSC_IRQ# */
 		>;
 	};
 
diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
index 60563ff0b7ce..a46ea98228c2 100644
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
 
 / {
 	/* these are used by bootloader for disabling nodes */
@@ -28,6 +29,53 @@
 		default-brightness-level = <7>;
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -165,6 +213,109 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 GPIO_ACTIVE_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_1p0";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+
+			channel@29 {
+				gw,mode = <1>;
+				reg = <0x29>;
+				label = "vdd_an1";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
 	eeprom1: eeprom@50 {
 		compatible = "atmel,24c02";
 		reg = <0x50>;
@@ -189,13 +340,6 @@
 		pagesize = <16>;
 	};
 
-	gpio: pca9555@23 {
-		compatible = "nxp,pca9555";
-		reg = <0x23>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
 	rtc: ds1672@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
@@ -365,6 +509,7 @@
 };
 
 &pwm4 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";
@@ -504,6 +649,7 @@
 		fsl,pins = <
 			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
 			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0xb0b1
 		>;
 	};
 
diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
index 8942bec65c5c..a28e79463d0c 100644
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
 
 / {
 	/* these are used by bootloader for disabling nodes */
@@ -28,6 +29,53 @@
 		default-brightness-level = <7>;
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -158,6 +206,115 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 GPIO_ACTIVE_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_1p0";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+
+			channel@26 {
+				gw,mode = <1>;
+				reg = <0x26>;
+				label = "vdd_gps";
+			};
+
+			channel@29 {
+				gw,mode = <1>;
+				reg = <0x29>;
+				label = "vdd_an1";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
 	eeprom1: eeprom@50 {
 		compatible = "atmel,24c02";
 		reg = <0x50>;
@@ -182,13 +339,6 @@
 		pagesize = <16>;
 	};
 
-	gpio: pca9555@23 {
-		compatible = "nxp,pca9555";
-		reg = <0x23>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
 	rtc: ds1672@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
@@ -356,6 +506,7 @@
 };
 
 &pwm4 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";
@@ -486,6 +637,7 @@
 		fsl,pins = <
 			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
 			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0xb0b1
 		>;
 	};
 
diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
index c40583dbd96d..b5f934b8a239 100644
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
 #include <dt-bindings/sound/fsl-imx-audmux.h>
 
 / {
@@ -29,6 +30,53 @@
 		default-brightness-level = <7>;
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -195,6 +243,117 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 GPIO_ACTIVE_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_1p0";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+
+			channel@26 {
+				gw,mode = <1>;
+				reg = <0x26>;
+				label = "vdd_gps";
+			};
+		};
+
+		fan-controller@2c {
+			compatible = "gw,gsc-fan";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2c>;
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
 	eeprom1: eeprom@50 {
 		compatible = "atmel,24c02";
 		reg = <0x50>;
@@ -219,13 +378,6 @@
 		pagesize = <16>;
 	};
 
-	gpio: pca9555@23 {
-		compatible = "nxp,pca9555";
-		reg = <0x23>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
 	rtc: ds1672@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
@@ -419,6 +571,7 @@
 };
 
 &pwm4 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default", "state_dio";
 	pinctrl-0 = <&pinctrl_pwm4_backlight>;
 	pinctrl-1 = <&pinctrl_pwm4_dio>;
@@ -571,6 +724,7 @@
 		fsl,pins = <
 			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
 			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0xb0b1
 		>;
 	};
 
diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
index c38e86eedcc0..1516e2b0bcde 100644
--- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
@@ -47,6 +47,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/media/tda1997x.h>
+#include <dt-bindings/input/linux-event-codes.h>
 #include <dt-bindings/sound/fsl-imx-audmux.h>
 
 / {
@@ -63,6 +64,53 @@
 		bootargs = "console=ttymxc1,115200";
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -110,7 +158,7 @@
 		simple-audio-card,frame-master = <&sound_codec>;
 
 		sound_cpu: simple-audio-card,cpu {
-			sound-dai = <&ssi2>;
+			sound-dai = <&ssi1>;
 		};
 
 		sound_codec: simple-audio-card,codec {
@@ -167,6 +215,97 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 GPIO_ACTIVE_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8a";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_1p0b";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
 	eeprom1: eeprom@50 {
 		compatible = "atmel,24c02";
 		reg = <0x50>;
@@ -191,13 +330,6 @@
 		pagesize = <16>;
 	};
 
-	gpio: pca9555@23 {
-		compatible = "nxp,pca9555";
-		reg = <0x23>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
 	rtc: ds1672@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
@@ -464,6 +596,7 @@
 		fsl,pins = <
 			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
 			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0xb0b1
 		>;
 	};
 
diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
index bb3597132c62..0da6e6f7482b 100644
--- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
 
 / {
 	/* these are used by bootloader for disabling nodes */
@@ -20,6 +21,53 @@
 		bootargs = "console=ttymxc1,115200";
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -92,6 +140,103 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 GPIO_ACTIVE_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_1p0";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
 	eeprom1: eeprom@50 {
 		compatible = "atmel,24c02";
 		reg = <0x50>;
@@ -116,13 +261,6 @@
 		pagesize = <16>;
 	};
 
-	gpio: pca9555@23 {
-		compatible = "nxp,pca9555";
-		reg = <0x23>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
 	rtc: ds1672@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
@@ -305,6 +443,7 @@
 		fsl,pins = <
 			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
 			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0xb0b1
 		>;
 	};
 
diff --git a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
index ee85031c3916..db30de5d6490 100644
--- a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
@@ -46,6 +46,7 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
 
 / {
 	/* these are used by bootloader for disabling nodes */
@@ -61,6 +62,53 @@
 		stdout-path = &uart2;
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -130,11 +178,101 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	gpio: pca9555@23 {
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 GPIO_ACTIVE_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8a";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_1p0b";
+			};
+
+			channel@26 {
+				gw,mode = <1>;
+				reg = <0x26>;
+				label = "vdd_an1";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
 		compatible = "nxp,pca9555";
 		reg = <0x23>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
 	};
 
 	eeprom1: eeprom@50 {
@@ -428,6 +566,7 @@
 		fsl,pins = <
 			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
 			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0xb0b1
 		>;
 	};
 
diff --git a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
index 69ca70d3baa8..d6b074597518 100644
--- a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
@@ -88,6 +88,53 @@
 		default-on;
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -243,6 +290,115 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 GPIO_ACTIVE_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_an1";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+
+			channel@26 {
+				gw,mode = <1>;
+				reg = <0x26>;
+				label = "vdd_gps";
+			};
+
+			channel@29 {
+				gw,mode = <1>;
+				reg = <0x29>;
+				label = "vdd_an2";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
 	eeprom1: eeprom@50 {
 		compatible = "atmel,24c02";
 		reg = <0x50>;
@@ -267,13 +423,6 @@
 		pagesize = <16>;
 	};
 
-	pca9555: gpio@23 {
-		compatible = "nxp,pca9555";
-		reg = <0x23>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
 	ds1672: rtc@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
@@ -471,6 +620,7 @@
 };
 
 &pwm4 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";
@@ -608,6 +758,7 @@
 		fsl,pins = <
 			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
 			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0xb0b1
 		>;
 	};
 
diff --git a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
index aee9221f0f29..fbe6c32bd756 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
@@ -46,6 +46,7 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
 
 / {
 	chosen {
@@ -71,6 +72,53 @@
 		default-brightness-level = <100>;
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -183,11 +231,101 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	pca9555: gpio@23 {
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 GPIO_ACTIVE_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_an1";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
 		compatible = "nxp,pca9555";
 		reg = <0x23>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
 	};
 
 	eeprom1: eeprom@50 {
@@ -365,6 +503,7 @@
 };
 
 &pwm1 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
index 76d6cf57f1c3..23c6e4047621 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
@@ -46,6 +46,7 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
 
 / {
 	/* these are used by bootloader for disabling nodes */
@@ -68,6 +69,53 @@
 		default-brightness-level = <7>;
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -205,11 +253,101 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	pca9555: gpio@23 {
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 GPIO_ACTIVE_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_an1";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
 		compatible = "nxp,pca9555";
 		reg = <0x23>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
 	};
 
 	eeprom1: eeprom@50 {
@@ -401,6 +539,7 @@
 };
 
 &pwm4 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";
@@ -503,6 +642,7 @@
 		fsl,pins = <
 			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
 			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x0001b0b0 /* GSC_IRQ# */
 		>;
 	};
 
diff --git a/arch/arm/boot/dts/imx6qdl-gw5907.dtsi b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
index 0bdebddffd51..b1ff7c859c4d 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
 
 / {
 	/* these are used by bootloader for disabling nodes */
@@ -19,6 +20,53 @@
 		stdout-path = &uart2;
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -102,11 +150,101 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	gpio@23 {
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 GPIO_ACTIVE_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_an1";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
 		compatible = "nxp,pca9555";
 		reg = <0x23>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
 	};
 
 	eeprom@50 {
@@ -133,7 +271,7 @@
 		pagesize = <16>;
 	};
 
-	rtc@68 {
+	ds1672@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
 	};
diff --git a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
index 0857de505192..11f84ee7b88f 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
 
 / {
 	/* these are used by bootloader for disabling nodes */
@@ -22,6 +23,53 @@
 		reg = <0x10000000 0x20000000>;
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -111,11 +159,121 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	gpio@23 {
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 GPIO_ACTIVE_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@6 {
+				gw,mode = <0>;
+				reg = <0x06>;
+				label = "temp";
+			};
+
+			channel@8 {
+				gw,mode = <3>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@82 {
+				gw,mode = <2>;
+				reg = <0x82>;
+				label = "vdd_vin";
+				gw,voltage-divider-ohms = <22100 1000>;
+				gw,voltage-offset-microvolt = <800000>;
+			};
+
+			channel@84 {
+				gw,mode = <2>;
+				reg = <0x84>;
+				label = "vdd_5p0";
+				gw,voltage-divider-ohms = <22100 10000>;
+			};
+
+			channel@86 {
+				gw,mode = <2>;
+				reg = <0x86>;
+				label = "vdd_3p3";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@88 {
+				gw,mode = <2>;
+				reg = <0x88>;
+				label = "vdd_2p5";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@8c {
+				gw,mode = <2>;
+				reg = <0x8c>;
+				label = "vdd_3p0";
+			};
+
+			channel@8e {
+				gw,mode = <2>;
+				reg = <0x8e>;
+				label = "vdd_arm";
+			};
+
+			channel@90 {
+				gw,mode = <2>;
+				reg = <0x90>;
+				label = "vdd_soc";
+			};
+
+			channel@92 {
+				gw,mode = <2>;
+				reg = <0x92>;
+				label = "vdd_1p5";
+			};
+
+			channel@98 {
+				gw,mode = <2>;
+				reg = <0x98>;
+				label = "vdd_1p8";
+			};
+
+			channel@9a {
+				gw,mode = <2>;
+				reg = <0x9a>;
+				label = "vdd_1p0";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@9c {
+				gw,mode = <2>;
+				reg = <0x9c>;
+				label = "vdd_an1";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@a2 {
+				gw,mode = <2>;
+				reg = <0xa2>;
+				label = "vdd_gsc";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
 		compatible = "nxp,pca9555";
 		reg = <0x23>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
 	};
 
 	eeprom@50 {
diff --git a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
index 8c57fd2f9a0b..0a1ffff9eb75 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
 
 / {
 	/* these are used by bootloader for disabling nodes */
@@ -20,6 +21,53 @@
 		stdout-path = &uart2;
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -106,11 +154,109 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	gpio@23 {
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 GPIO_ACTIVE_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_1p0";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+		};
+
+		fan-controller@a {
+			compatible = "gw,gsc-fan";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0a>;
+		};
+	};
+
+	gsc_gpio: gpio@23 {
 		compatible = "nxp,pca9555";
 		reg = <0x23>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
 	};
 
 	eeprom@50 {
diff --git a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
index 635c203bd64d..d62a8da49367 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
 
 / {
 	/* these are used by bootloader for disabling nodes */
@@ -19,6 +20,53 @@
 		stdout-path = &uart2;
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -87,11 +135,114 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	gpio@23 {
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 GPIO_ACTIVE_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@6 {
+				gw,mode = <0>;
+				reg = <0x06>;
+				label = "temp";
+			};
+
+			channel@8 {
+				gw,mode = <3>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@82 {
+				gw,mode = <2>;
+				reg = <0x82>;
+				label = "vdd_vin";
+				gw,voltage-divider-ohms = <22100 1000>;
+				gw,voltage-offset-microvolt = <800000>;
+			};
+
+			channel@84 {
+				gw,mode = <2>;
+				reg = <0x84>;
+				label = "vdd_5p0";
+				gw,voltage-divider-ohms = <22100 10000>;
+			};
+
+			channel@86 {
+				gw,mode = <2>;
+				reg = <0x86>;
+				label = "vdd_3p3";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@88 {
+				gw,mode = <2>;
+				reg = <0x88>;
+				label = "vdd_2p5";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@8c {
+				gw,mode = <2>;
+				reg = <0x8c>;
+				label = "vdd_arm";
+			};
+
+			channel@8e {
+				gw,mode = <2>;
+				reg = <0x8e>;
+				label = "vdd_soc";
+			};
+
+			channel@90 {
+				gw,mode = <2>;
+				reg = <0x90>;
+				label = "vdd_1p5";
+			};
+
+			channel@92 {
+				gw,mode = <2>;
+				reg = <0x92>;
+				label = "vdd_1p0";
+			};
+
+			channel@98 {
+				gw,mode = <2>;
+				reg = <0x98>;
+				label = "vdd_3p0";
+			};
+
+			channel@9a {
+				gw,mode = <2>;
+				reg = <0x9a>;
+				label = "vdd_an1";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@a2 {
+				gw,mode = <2>;
+				reg = <0xa2>;
+				label = "vdd_gsc";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
 		compatible = "nxp,pca9555";
 		reg = <0x23>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
 	};
 
 	eeprom@50 {
diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi
index 756f3a9f1b4f..23c318d9636f 100644
--- a/arch/arm/boot/dts/imx6qdl-icore.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi
@@ -245,6 +245,7 @@
 };
 
 &pwm3 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
 	status = "okay";
@@ -397,7 +398,7 @@
 
 	pinctrl_usbotg: usbotggrp {
 		fsl,pins = <
-			MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
 		>;
 	};
 
@@ -409,6 +410,7 @@
 			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17070
 			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17070
 			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17070
+			MX6QDL_PAD_GPIO_1__GPIO1_IO01  0x1b0b0
 		>;
 	};
 
diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
index 2418cf8f2317..d526f01a2c52 100644
--- a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
@@ -497,6 +497,7 @@
 };
 
 &pwm1 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
@@ -509,6 +510,7 @@
 };
 
 &pwm4 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
index c3415aa348a2..185a1a31ca39 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
@@ -736,12 +736,14 @@
 };
 
 &pwm1 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
 };
 
 &pwm2 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm2>;
 	status = "okay";
@@ -754,6 +756,7 @@
 };
 
 &pwm4 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
index ed53f07c6b7b..4bbe54e1ddb5 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
@@ -639,6 +639,7 @@
 };
 
 &pwm1 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
@@ -651,6 +652,7 @@
 };
 
 &pwm4 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
index 8b0e432099b5..c63e1bc1ad3a 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
@@ -596,6 +596,7 @@
 };
 
 &pwm1 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
@@ -608,6 +609,7 @@
 };
 
 &pwm4 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi
index 9ebd438dce7d..019938562aa9 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi
@@ -218,6 +218,7 @@
 };
 
 &pwm1 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-prti6q.dtsi b/arch/arm/boot/dts/imx6qdl-prti6q.dtsi
new file mode 100644
index 000000000000..19578f660b09
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-prti6q.dtsi
@@ -0,0 +1,163 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2014 Protonic Holland
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_usb_h1_vbus: regulator-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "h1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usb_otg_vbus: regulator-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "otg-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	temperature-sensor@70 {
+		compatible = "ti,tmp103";
+		reg = <0x70>;
+	};
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	phy_type = "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	phy_type = "utmi";
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b008
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b008
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001f8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD		0x170f9
+			MX6QDL_PAD_SD1_CLK__SD1_CLK		0x100f9
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x170f9
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x170f9
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x170f9
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x170f9
+			MX6QDL_PAD_GPIO_1__GPIO1_IO01		0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17099
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10099
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17099
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17099
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17099
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17099
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17099
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17099
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17099
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17099
+			MX6QDL_PAD_SD3_RST__SD3_RESET		0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__USB_OTG_OC	0x1b0b0
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22	0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index cf628465cd0a..55f736dbee0b 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -800,6 +800,7 @@
 };
 
 &pwm3 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index 8468216dae9b..95f9ddab5996 100644
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -687,18 +687,21 @@
 };
 
 &pwm1 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
 };
 
 &pwm3 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
 	status = "okay";
 };
 
 &pwm4 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 28b35ccb3757..68b3e68cb8df 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -203,9 +203,21 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii-id";
-	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+	phy-handle = <&phy>;
 	fsl,magic-packet;
 	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy: ethernet-phy@1 {
+			reg = <1>;
+			qca,clk-out-frequency = <125000000>;
+			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+		};
+	};
 };
 
 &hdmi {
@@ -729,6 +741,7 @@
 };
 
 &pwm1 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-savageboard.dtsi b/arch/arm/boot/dts/imx6qdl-savageboard.dtsi
index a616e3c400d3..02e6d36e85fa 100644
--- a/arch/arm/boot/dts/imx6qdl-savageboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-savageboard.dtsi
@@ -140,6 +140,7 @@
 };
 
 &pwm1 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
index c68cb90fd801..362e65ccaa78 100644
--- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
@@ -738,14 +738,12 @@
 &pwm1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
-	#pwm-cells = <3>;
 	status = "disabled";
 };
 
 &pwm2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm2>;
-	#pwm-cells = <3>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
index 20350e803377..5af9ce977b12 100644
--- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
@@ -719,6 +719,8 @@
 	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clock-frequency = <12500000>;
+		suppress-preamble;
 		status = "okay";
 
 		switch: switch@0 {
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 32114cf6acee..43edbf1156c7 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -69,17 +69,6 @@
 		};
 	};
 
-	tempmon: tempmon {
-		compatible = "fsl,imx6q-tempmon";
-		interrupt-parent = <&gpc>;
-		interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
-		fsl,tempmon = <&anatop>;
-		nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
-		nvmem-cell-names = "calib", "temp_grade";
-		clocks = <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
-		#thermal-sensor-cells = <0>;
-	};
-
 	ldb: ldb {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -256,7 +245,7 @@
 			interrupt-parent = <&intc>;
 		};
 
-		L2: l2-cache@a02000 {
+		L2: cache-controller@a02000 {
 			compatible = "arm,pl310-cache";
 			reg = <0x00a02000 0x1000>;
 			interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
@@ -510,7 +499,7 @@
 			};
 
 			pwm1: pwm@2080000 {
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 				reg = <0x02080000 0x4000>;
 				interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
@@ -521,7 +510,7 @@
 			};
 
 			pwm2: pwm@2084000 {
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 				reg = <0x02084000 0x4000>;
 				interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
@@ -532,7 +521,7 @@
 			};
 
 			pwm3: pwm@2088000 {
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 				reg = <0x02088000 0x4000>;
 				interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
@@ -543,7 +532,7 @@
 			};
 
 			pwm4: pwm@208c000 {
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 				reg = <0x0208c000 0x4000>;
 				interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
@@ -795,6 +784,17 @@
 					anatop-min-voltage = <725000>;
 					anatop-max-voltage = <1450000>;
 				};
+
+				tempmon: tempmon {
+					compatible = "fsl,imx6q-tempmon";
+					interrupt-parent = <&gpc>;
+					interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
+					fsl,tempmon = <&anatop>;
+					nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+					nvmem-cell-names = "calib", "temp_grade";
+					clocks = <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+					#thermal-sensor-cells = <0>;
+				};
 			};
 
 			usbphy1: usbphy@20c9000 {
@@ -871,8 +871,7 @@
 				reg = <0x020dc000 0x4000>;
 				interrupt-controller;
 				#interrupt-cells = <3>;
-				interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>,
-					     <0 90 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-parent = <&intc>;
 				clocks = <&clks IMX6QDL_CLK_IPG>;
 				clock-names = "ipg";
@@ -1057,7 +1056,7 @@
 					     <0 126 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			usdhc1: usdhc@2190000 {
+			usdhc1: mmc@2190000 {
 				compatible = "fsl,imx6q-usdhc";
 				reg = <0x02190000 0x4000>;
 				interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
@@ -1069,7 +1068,7 @@
 				status = "disabled";
 			};
 
-			usdhc2: usdhc@2194000 {
+			usdhc2: mmc@2194000 {
 				compatible = "fsl,imx6q-usdhc";
 				reg = <0x02194000 0x4000>;
 				interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
@@ -1081,7 +1080,7 @@
 				status = "disabled";
 			};
 
-			usdhc3: usdhc@2198000 {
+			usdhc3: mmc@2198000 {
 				compatible = "fsl,imx6q-usdhc";
 				reg = <0x02198000 0x4000>;
 				interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
@@ -1093,7 +1092,7 @@
 				status = "disabled";
 			};
 
-			usdhc4: usdhc@219c000 {
+			usdhc4: mmc@219c000 {
 				compatible = "fsl,imx6q-usdhc";
 				reg = <0x0219c000 0x4000>;
 				interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
@@ -1162,7 +1161,7 @@
 				status = "disabled";
 			};
 
-			ocotp: ocotp-ctrl@21bc000 {
+			ocotp: efuse@21bc000 {
 				compatible = "fsl,imx6q-ocotp", "syscon";
 				reg = <0x021bc000 0x4000>;
 				clocks = <&clks IMX6QDL_CLK_IIM>;
diff --git a/arch/arm/boot/dts/imx6qp-sabreauto.dts b/arch/arm/boot/dts/imx6qp-sabreauto.dts
index d4caeeb0af70..639d9dd35377 100644
--- a/arch/arm/boot/dts/imx6qp-sabreauto.dts
+++ b/arch/arm/boot/dts/imx6qp-sabreauto.dts
@@ -50,6 +50,10 @@
 	status = "disabled";
 };
 
+&sata {
+	status = "okay";
+};
+
 &vgen3_reg {
 	regulator-always-on;
 };
diff --git a/arch/arm/boot/dts/imx6qp-sabresd.dts b/arch/arm/boot/dts/imx6qp-sabresd.dts
index f1b9cb104fdd..480e73183f6b 100644
--- a/arch/arm/boot/dts/imx6qp-sabresd.dts
+++ b/arch/arm/boot/dts/imx6qp-sabresd.dts
@@ -53,3 +53,7 @@
 &pcie {
 	status = "disabled";
 };
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts
index bc86cfaaa9c2..b1b069e723d2 100644
--- a/arch/arm/boot/dts/imx6sl-evk.dts
+++ b/arch/arm/boot/dts/imx6sl-evk.dts
@@ -575,6 +575,7 @@
 };
 
 &pwm1 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index 911d8cf77f2c..1c7180f28539 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -93,16 +93,6 @@
 		};
 	};
 
-	tempmon: tempmon {
-		compatible = "fsl,imx6q-tempmon";
-		interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-parent = <&gpc>;
-		fsl,tempmon = <&anatop>;
-		nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
-		nvmem-cell-names = "calib", "temp_grade";
-		clocks = <&clks IMX6SL_CLK_PLL3_USB_OTG>;
-	};
-
 	pmu {
 		compatible = "arm,cortex-a9-pmu";
 		interrupt-parent = <&gpc>;
@@ -136,7 +126,7 @@
 			interrupt-parent = <&intc>;
 		};
 
-		L2: l2-cache@a02000 {
+		L2: cache-controller@a02000 {
 			compatible = "arm,pl310-cache";
 			reg = <0x00a02000 0x1000>;
 			interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
@@ -344,7 +334,7 @@
 			};
 
 			pwm1: pwm@2080000 {
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
 				reg = <0x02080000 0x4000>;
 				interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
@@ -354,7 +344,7 @@
 			};
 
 			pwm2: pwm@2084000 {
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
 				reg = <0x02084000 0x4000>;
 				interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
@@ -364,7 +354,7 @@
 			};
 
 			pwm3: pwm@2088000 {
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
 				reg = <0x02088000 0x4000>;
 				interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
@@ -374,7 +364,7 @@
 			};
 
 			pwm4: pwm@208c000 {
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				compatible = "fsl,imx6sl-pwm", "fsl,imx27-pwm";
 				reg = <0x0208c000 0x4000>;
 				interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
@@ -628,6 +618,16 @@
 					anatop-min-voltage = <725000>;
 					anatop-max-voltage = <1450000>;
 				};
+
+				tempmon: tempmon {
+					compatible = "fsl,imx6q-tempmon";
+					interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-parent = <&gpc>;
+					fsl,tempmon = <&anatop>;
+					nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+					nvmem-cell-names = "calib", "temp_grade";
+					clocks = <&clks IMX6SL_CLK_PLL3_USB_OTG>;
+				};
 			};
 
 			usbphy1: usbphy@20c9000 {
@@ -854,7 +854,7 @@
 				status = "disabled";
 			};
 
-			usdhc1: usdhc@2190000 {
+			usdhc1: mmc@2190000 {
 				compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
 				reg = <0x02190000 0x4000>;
 				interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
@@ -866,7 +866,7 @@
 				status = "disabled";
 			};
 
-			usdhc2: usdhc@2194000 {
+			usdhc2: mmc@2194000 {
 				compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
 				reg = <0x02194000 0x4000>;
 				interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
@@ -878,7 +878,7 @@
 				status = "disabled";
 			};
 
-			usdhc3: usdhc@2198000 {
+			usdhc3: mmc@2198000 {
 				compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
 				reg = <0x02198000 0x4000>;
 				interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
@@ -890,7 +890,7 @@
 				status = "disabled";
 			};
 
-			usdhc4: usdhc@219c000 {
+			usdhc4: mmc@219c000 {
 				compatible = "fsl,imx6sl-usdhc", "fsl,imx6q-usdhc";
 				reg = <0x0219c000 0x4000>;
 				interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
@@ -952,7 +952,7 @@
 				status = "disabled";
 			};
 
-			ocotp: ocotp-ctrl@21bc000 {
+			ocotp: efuse@21bc000 {
 				compatible = "fsl,imx6sl-ocotp", "syscon";
 				reg = <0x021bc000 0x4000>;
 				clocks = <&clks IMX6SL_CLK_OCOTP>;
diff --git a/arch/arm/boot/dts/imx6sll-evk.dts b/arch/arm/boot/dts/imx6sll-evk.dts
index 5ace9e6acf85..c755cbdb7cde 100644
--- a/arch/arm/boot/dts/imx6sll-evk.dts
+++ b/arch/arm/boot/dts/imx6sll-evk.dts
@@ -260,6 +260,7 @@
 };
 
 &pwm1 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi
index edd3abb9a9f1..fb5d3bc50c6b 100644
--- a/arch/arm/boot/dts/imx6sll.dtsi
+++ b/arch/arm/boot/dts/imx6sll.dtsi
@@ -105,16 +105,6 @@
 		clock-output-names = "ipp_di1";
 	};
 
-	tempmon: temperature-sensor {
-		compatible = "fsl,imx6sll-tempmon", "fsl,imx6sx-tempmon";
-		interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-parent = <&gpc>;
-		fsl,tempmon = <&anatop>;
-		nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
-		nvmem-cell-names = "calib", "temp_grade";
-		clocks = <&clks IMX6SLL_CLK_PLL3_USB_OTG>;
-	};
-
 	soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -136,7 +126,7 @@
 			interrupt-parent = <&intc>;
 		};
 
-		L2: l2-cache@a02000 {
+		L2: cache-controller@a02000 {
 			compatible = "arm,pl310-cache";
 			reg = <0x00a02000 0x1000>;
 			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
@@ -271,7 +261,7 @@
 					status = "disabled";
 				};
 
-				ssi1: ssi-controller@2028000 {
+				ssi1: ssi@2028000 {
 					compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi";
 					reg = <0x02028000 0x4000>;
 					interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
@@ -284,7 +274,7 @@
 					status = "disabled";
 				};
 
-				ssi2: ssi-controller@202c000 {
+				ssi2: ssi@202c000 {
 					compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi";
 					reg = <0x0202c000 0x4000>;
 					interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
@@ -297,7 +287,7 @@
 					status = "disabled";
 				};
 
-				ssi3: ssi-controller@2030000 {
+				ssi3: ssi@2030000 {
 					compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi";
 					reg = <0x02030000 0x4000>;
 					interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
@@ -331,7 +321,7 @@
 				clocks = <&clks IMX6SLL_CLK_PWM1>,
 					 <&clks IMX6SLL_CLK_PWM1>;
 				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 			};
 
 			pwm2: pwm@2084000 {
@@ -341,7 +331,7 @@
 				clocks = <&clks IMX6SLL_CLK_PWM2>,
 					 <&clks IMX6SLL_CLK_PWM2>;
 				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 			};
 
 			pwm3: pwm@2088000 {
@@ -351,7 +341,7 @@
 				clocks = <&clks IMX6SLL_CLK_PWM3>,
 					 <&clks IMX6SLL_CLK_PWM3>;
 				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 			};
 
 			pwm4: pwm@208c000 {
@@ -361,7 +351,7 @@
 				clocks = <&clks IMX6SLL_CLK_PWM4>,
 					 <&clks IMX6SLL_CLK_PWM4>;
 				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 			};
 
 			gpt1: timer@2098000 {
@@ -531,6 +521,16 @@
 					anatop-max-voltage = <3400000>;
 					anatop-enable-bit = <0>;
 				};
+
+				tempmon: temperature-sensor {
+					compatible = "fsl,imx6sll-tempmon", "fsl,imx6sx-tempmon";
+					interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-parent = <&gpc>;
+					fsl,tempmon = <&anatop>;
+					nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+					nvmem-cell-names = "calib", "temp_grade";
+					clocks = <&clks IMX6SLL_CLK_PLL3_USB_OTG>;
+				};
 			};
 
 			usbphy1: usb-phy@20c9000 {
@@ -786,7 +786,7 @@
 				clocks = <&clks IMX6SLL_CLK_MMDC_P0_IPG>;
 			};
 
-			ocotp: ocotp-ctrl@21bc000 {
+			ocotp: efuse@21bc000 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 				compatible = "fsl,imx6sll-ocotp", "syscon";
diff --git a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
index d84ea6999377..66af78e83b70 100644
--- a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
+++ b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
@@ -229,6 +229,7 @@
 };
 
 &pwm4 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts
index 825924448ab4..83ee97252ff1 100644
--- a/arch/arm/boot/dts/imx6sx-sabreauto.dts
+++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts
@@ -66,12 +66,68 @@
 		enable-active-high;
 		vin-supply = <&reg_can_en>;
 	};
+
+	reg_cs42888: cs42888_supply {
+		compatible = "regulator-fixed";
+		regulator-name = "cs42888_supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	sound-cs42888 {
+		compatible = "fsl,imx6-sabreauto-cs42888",
+			     "fsl,imx-audio-cs42888";
+		model = "imx-cs42888";
+		audio-cpu = <&esai>;
+		audio-asrc = <&asrc>;
+		audio-codec = <&cs42888>;
+		audio-routing =
+			"Line Out Jack", "AOUT1L",
+			"Line Out Jack", "AOUT1R",
+			"Line Out Jack", "AOUT2L",
+			"Line Out Jack", "AOUT2R",
+			"Line Out Jack", "AOUT3L",
+			"Line Out Jack", "AOUT3R",
+			"Line Out Jack", "AOUT4L",
+			"Line Out Jack", "AOUT4R",
+			"AIN1L", "Line In Jack",
+			"AIN1R", "Line In Jack",
+			"AIN2L", "Line In Jack",
+			"AIN2R", "Line In Jack";
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "imx-spdif";
+		spdif-controller = <&spdif>;
+		spdif-in;
+	};
 };
 
 &anaclk2 {
 	clock-frequency = <24576000>;
 };
 
+&clks {
+	assigned-clocks = <&clks IMX6SX_PLL4_BYPASS_SRC>,
+			  <&clks IMX6SX_PLL4_BYPASS>,
+			  <&clks IMX6SX_CLK_PLL4_POST_DIV>;
+	assigned-clock-parents = <&clks IMX6SX_CLK_LVDS2_IN>,
+				 <&clks IMX6SX_PLL4_BYPASS_SRC>;
+	assigned-clock-rates = <0>, <0>, <24576000>;
+};
+
+&esai {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esai>;
+	assigned-clocks = <&clks IMX6SX_CLK_ESAI_SEL>,
+			<&clks IMX6SX_CLK_ESAI_EXTAL>;
+	assigned-clock-parents = <&clks IMX6SX_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <0>, <24576000>;
+	status = "okay";
+};
+
 &fec1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet1>;
@@ -99,7 +155,7 @@
 &fec2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet2>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy0>;
 	fsl,magic-packet;
 	status = "okay";
@@ -193,6 +249,21 @@
 		>;
 	};
 
+	pinctrl_esai: esaigrp {
+		fsl,pins = <
+			MX6SX_PAD_CSI_DATA00__ESAI_TX_CLK   0x1b030
+			MX6SX_PAD_CSI_DATA01__ESAI_TX_FS    0x1b030
+			MX6SX_PAD_CSI_HSYNC__ESAI_TX0       0x1b030
+			MX6SX_PAD_CSI_DATA04__ESAI_TX1      0x1b030
+			MX6SX_PAD_CSI_DATA06__ESAI_TX2_RX3  0x1b030
+			MX6SX_PAD_CSI_DATA07__ESAI_TX3_RX2  0x1b030
+			MX6SX_PAD_CSI_DATA02__ESAI_RX_CLK   0x1b030
+			MX6SX_PAD_CSI_DATA03__ESAI_RX_FS    0x1b030
+			MX6SX_PAD_CSI_VSYNC__ESAI_TX5_RX0   0x1b030
+			MX6SX_PAD_CSI_DATA05__ESAI_TX4_RX1  0x1b030
+		>;
+	};
+
 	pinctrl_flexcan1: flexcan1grp {
 		fsl,pins = <
 			MX6SX_PAD_QSPI1B_DQS__CAN1_TX   0x1b020
@@ -227,6 +298,12 @@
 		>;
 	};
 
+	pinctrl_spdif: spdifgrp {
+		fsl,pins = <
+			MX6SX_PAD_ENET2_COL__SPDIF_IN           0x1b0b0
+		>;
+	};
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
 			MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX		0x1b0b1
@@ -313,6 +390,17 @@
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
+	cs42888: cs42888@48 {
+		compatible = "cirrus,cs42888";
+		reg = <0x48>;
+		clocks = <&anaclk2 0>;
+		clock-names = "mclk";
+		VA-supply = <&reg_cs42888>;
+		VD-supply = <&reg_cs42888>;
+		VLS-supply = <&reg_cs42888>;
+		VLC-supply = <&reg_cs42888>;
+	};
+
 	touchscreen@4 {
 		compatible = "eeti,egalax_ts";
 		reg = <0x04>;
@@ -454,6 +542,14 @@
 	};
 };
 
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif>;
+	assigned-clocks = <&clks IMX6SX_CLK_SPDIF_PODF>;
+	assigned-clock-rates = <24576000>;
+	status = "okay";
+};
+
 &wdog1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_wdog>;
diff --git a/arch/arm/boot/dts/imx6sx-sdb-mqs.dts b/arch/arm/boot/dts/imx6sx-sdb-mqs.dts
new file mode 100644
index 000000000000..a4ab2d3e960c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sx-sdb-mqs.dts
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2014 Freescale Semiconductor, Inc.
+
+#include "imx6sx-sdb.dts"
+/ {
+
+	sound {
+		status = "disabled";
+	};
+
+	sound-mqs {
+		compatible = "fsl,imx6sx-sdb-mqs",
+			     "fsl,imx-audio-mqs";
+		model = "mqs-audio";
+		audio-cpu = <&sai1>;
+		audio-asrc = <&asrc>;
+		audio-codec = <&mqs>;
+	};
+};
+
+&usdhc2 {
+	/* pin conflict with mqs*/
+	status = "disabled";
+};
+
+&mqs {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mqs>;
+	clocks = <&clks IMX6SX_CLK_SAI1>;
+	clock-names = "mclk";
+	status = "okay";
+};
+
+&sai1 {
+	pinctrl-0 = <>;
+	status = "okay";
+};
+
+&ssi2 {
+	status = "disabled";
+};
+
+&sdma {
+	gpr = <&gpr>;
+	/* SDMA event remap for SAI1 */
+	fsl,sdma-event-remap = <0 15 1>, <0 16 1>;
+};
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi
index 3e5fb72f21fc..b8c23eba9dc7 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dtsi
+++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi
@@ -179,6 +179,15 @@
 			};
 		};
 	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif",
+			   "fsl,imx6sx-sdb-spdif";
+		model = "imx-spdif";
+		spdif-controller = <&spdif>;
+		spdif-out;
+	};
+
 };
 
 &audmux {
@@ -213,7 +222,7 @@
 &fec2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet2>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy2>;
 	status = "okay";
 };
@@ -281,6 +290,7 @@
 };
 
 &pwm3 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
 	status = "okay";
@@ -296,6 +306,14 @@
 	status = "disabled";
 };
 
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif>;
+	assigned-clocks = <&clks IMX6SX_CLK_SPDIF_PODF>;
+	assigned-clock-rates = <24576000>;
+	status = "okay";
+};
+
 &ssi2 {
 	status = "okay";
 };
@@ -505,6 +523,13 @@
 			>;
 		};
 
+		pinctrl_mqs: mqsgrp {
+			fsl,pins = <
+				MX6SX_PAD_SD2_CLK__MQS_RIGHT 0x120b0
+				MX6SX_PAD_SD2_CMD__MQS_LEFT  0x120b0
+			>;
+		};
+
 		pinctrl_pcie: pciegrp {
 			fsl,pins = <
 				MX6SX_PAD_ENET1_COL__GPIO2_IO_0 0x10b0
@@ -562,6 +587,12 @@
 			>;
 		};
 
+		pinctrl_spdif: spdifgrp {
+			fsl,pins = <
+				MX6SX_PAD_SD4_DATA4__SPDIF_OUT          0x1b0b0
+			>;
+		};
+
 		pinctrl_uart1: uart1grp {
 			fsl,pins = <
 				MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX	0x1b0b1
diff --git a/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts b/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts
index 6b728b03f1f2..d25e27d0315f 100644
--- a/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts
+++ b/arch/arm/boot/dts/imx6sx-softing-vining-2000.dts
@@ -505,18 +505,21 @@
 };
 
 &pwm1 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
 };
 
 &pwm2 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm2>;
 	status = "okay";
 };
 
 &pwm6 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm6>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 94e3df47d1ad..b480dfa9e251 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -134,14 +134,10 @@
 		clock-output-names = "anaclk2";
 	};
 
-	tempmon: tempmon {
-		compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon";
-		interrupt-parent = <&gpc>;
-		interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-		fsl,tempmon = <&anatop>;
-		nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
-		nvmem-cell-names = "calib", "temp_grade";
-		clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>;
+	mqs: mqs {
+		compatible = "fsl,imx6sx-mqs";
+		gpr = <&gpr>;
+		status = "disabled";
 	};
 
 	pmu {
@@ -183,7 +179,7 @@
 			interrupt-parent = <&intc>;
 		};
 
-		L2: l2-cache@a02000 {
+		L2: cache-controller@a02000 {
 			compatible = "arm,pl310-cache";
 			reg = <0x00a02000 0x1000>;
 			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
@@ -335,6 +331,7 @@
 				};
 
 				esai: esai@2024000 {
+					compatible = "fsl,imx6sx-esai", "fsl,imx35-esai";
 					reg = <0x02024000 0x4000>;
 					interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
 					clocks = <&clks IMX6SX_CLK_ESAI_IPG>,
@@ -344,6 +341,9 @@
 						 <&clks IMX6SX_CLK_SPBA>;
 					clock-names = "core", "mem", "extal",
 						      "fsys", "spba";
+					dmas = <&sdma 23 21 0>,
+					       <&sdma 24 21 0>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 
@@ -390,18 +390,28 @@
 				};
 
 				asrc: asrc@2034000 {
+					compatible = "fsl,imx6sx-asrc", "fsl,imx53-asrc";
 					reg = <0x02034000 0x4000>;
 					interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-					clocks = <&clks IMX6SX_CLK_ASRC_MEM>,
-						 <&clks IMX6SX_CLK_ASRC_IPG>,
-						 <&clks IMX6SX_CLK_SPDIF>,
-						 <&clks IMX6SX_CLK_SPBA>;
-					clock-names = "mem", "ipg", "asrck", "spba";
-					dmas = <&sdma 17 20 1>, <&sdma 18 20 1>,
-					       <&sdma 19 20 1>, <&sdma 20 20 1>,
-					       <&sdma 21 20 1>, <&sdma 22 20 1>;
+					clocks = <&clks IMX6SX_CLK_ASRC_IPG>,
+						<&clks IMX6SX_CLK_ASRC_MEM>, <&clks 0>,
+						<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+						<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+						<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+						<&clks IMX6SX_CLK_SPDIF>, <&clks 0>, <&clks 0>,
+						<&clks IMX6SX_CLK_SPBA>;
+					clock-names = "mem", "ipg", "asrck_0",
+						"asrck_1", "asrck_2", "asrck_3", "asrck_4",
+						"asrck_5", "asrck_6", "asrck_7", "asrck_8",
+						"asrck_9", "asrck_a", "asrck_b", "asrck_c",
+						"asrck_d", "asrck_e", "asrck_f", "spba";
+					dmas = <&sdma 17 23 1>, <&sdma 18 23 1>,
+					       <&sdma 19 23 1>, <&sdma 20 23 1>,
+					       <&sdma 21 23 1>, <&sdma 22 23 1>;
 					dma-names = "rxa", "rxb", "rxc",
 						    "txa", "txb", "txc";
+					fsl,asrc-rate  = <48000>;
+					fsl,asrc-width = <16>;
 					status = "okay";
 				};
 			};
@@ -413,7 +423,7 @@
 				clocks = <&clks IMX6SX_CLK_PWM1>,
 					 <&clks IMX6SX_CLK_PWM1>;
 				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 			};
 
 			pwm2: pwm@2084000 {
@@ -423,7 +433,7 @@
 				clocks = <&clks IMX6SX_CLK_PWM2>,
 					 <&clks IMX6SX_CLK_PWM2>;
 				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 			};
 
 			pwm3: pwm@2088000 {
@@ -433,7 +443,7 @@
 				clocks = <&clks IMX6SX_CLK_PWM3>,
 					 <&clks IMX6SX_CLK_PWM3>;
 				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 			};
 
 			pwm4: pwm@208c000 {
@@ -443,7 +453,7 @@
 				clocks = <&clks IMX6SX_CLK_PWM4>,
 					 <&clks IMX6SX_CLK_PWM4>;
 				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 			};
 
 			flexcan1: can@2090000 {
@@ -696,6 +706,16 @@
 					anatop-min-voltage = <725000>;
 					anatop-max-voltage = <1450000>;
 				};
+
+				tempmon: tempmon {
+					compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon";
+					interrupt-parent = <&gpc>;
+					interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+					fsl,tempmon = <&anatop>;
+					nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+					nvmem-cell-names = "calib", "temp_grade";
+					clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>;
+				};
 			};
 
 			usbphy1: usbphy@20c9000 {
@@ -943,7 +963,7 @@
 				status = "disabled";
 			};
 
-			usdhc1: usdhc@2190000 {
+			usdhc1: mmc@2190000 {
 				compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
 				reg = <0x02190000 0x4000>;
 				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
@@ -955,7 +975,7 @@
 				status = "disabled";
 			};
 
-			usdhc2: usdhc@2194000 {
+			usdhc2: mmc@2194000 {
 				compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
 				reg = <0x02194000 0x4000>;
 				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
@@ -967,7 +987,7 @@
 				status = "disabled";
 			};
 
-			usdhc3: usdhc@2198000 {
+			usdhc3: mmc@2198000 {
 				compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
 				reg = <0x02198000 0x4000>;
 				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
@@ -979,7 +999,7 @@
 				status = "disabled";
 			};
 
-			usdhc4: usdhc@219c000 {
+			usdhc4: mmc@219c000 {
 				compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc";
 				reg = <0x0219c000 0x4000>;
 				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
@@ -1055,7 +1075,7 @@
 				status = "disabled";
 			};
 
-			ocotp: ocotp-ctrl@21bc000 {
+			ocotp: efuse@21bc000 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 				compatible = "fsl,imx6sx-ocotp", "syscon";
@@ -1337,7 +1357,7 @@
 				clocks = <&clks IMX6SX_CLK_PWM5>,
 					 <&clks IMX6SX_CLK_PWM5>;
 				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 			};
 
 			pwm6: pwm@22a8000 {
@@ -1347,7 +1367,7 @@
 				clocks = <&clks IMX6SX_CLK_PWM6>,
 					 <&clks IMX6SX_CLK_PWM6>;
 				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 			};
 
 			pwm7: pwm@22ac000 {
@@ -1357,7 +1377,7 @@
 				clocks = <&clks IMX6SX_CLK_PWM7>,
 					 <&clks IMX6SX_CLK_PWM7>;
 				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 			};
 
 			pwm8: pwm@22b0000 {
@@ -1367,7 +1387,7 @@
 				clocks = <&clks IMX6SX_CLK_PWM8>,
 					 <&clks IMX6SX_CLK_PWM8>;
 				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 			};
 		};
 
diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
index 265bf4108cb6..64c2d1e9f7fc 100644
--- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
+++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
@@ -228,6 +228,7 @@
 };
 
 &pwm1 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
index 5d3805b07032..a0bbec57ddc7 100644
--- a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
+++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
@@ -168,6 +168,7 @@
 };
 
 &pwm5 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm5>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6ul-geam.dts b/arch/arm/boot/dts/imx6ul-geam.dts
index 9f63706383a7..a0097da03f38 100644
--- a/arch/arm/boot/dts/imx6ul-geam.dts
+++ b/arch/arm/boot/dts/imx6ul-geam.dts
@@ -195,6 +195,7 @@
 };
 
 &pwm8 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm8>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi b/arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi
index 18966350bfd8..935a77d717a6 100644
--- a/arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi
+++ b/arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi
@@ -155,6 +155,7 @@
 };
 
 &pwm3 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6ul-isiot.dtsi b/arch/arm/boot/dts/imx6ul-isiot.dtsi
index cc9adce638f5..14fc4828ba4e 100644
--- a/arch/arm/boot/dts/imx6ul-isiot.dtsi
+++ b/arch/arm/boot/dts/imx6ul-isiot.dtsi
@@ -187,6 +187,7 @@
 };
 
 &pwm8 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm8>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts b/arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts
index 5bad29683cc3..5bfad4655b22 100644
--- a/arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts
+++ b/arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts
@@ -41,6 +41,7 @@
 };
 
 &pwm7 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm7>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi
index f05e91841202..a35be2a369b3 100644
--- a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi
+++ b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi
@@ -153,6 +153,7 @@
 };
 
 &pwm8 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm8>;
 	status = "okay";
@@ -232,13 +233,6 @@
 	status = "okay";
 };
 
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-	status = "okay";
-};
-
 &iomuxc {
 	pinctrl-0 = <&pinctrl_reset_out &pinctrl_gpio>;
 
@@ -409,10 +403,4 @@
 			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170f9
 		>;
 	};
-
-	pinctrl_wdog: wdoggrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY	0x30b0
-		>;
-	};
 };
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi
index a17af4d9bfdf..61ba21a605a8 100644
--- a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi
+++ b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi
@@ -57,6 +57,13 @@
 	status = "okay";
 };
 
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
 &iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_reset_out>;
@@ -106,4 +113,10 @@
 			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09      0x1b0b0
 		>;
 	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY    0x18b0
+		>;
+	};
 };
diff --git a/arch/arm/boot/dts/imx6ul-pico.dtsi b/arch/arm/boot/dts/imx6ul-pico.dtsi
index df1da98ab10f..357ffb2f5ad6 100644
--- a/arch/arm/boot/dts/imx6ul-pico.dtsi
+++ b/arch/arm/boot/dts/imx6ul-pico.dtsi
@@ -175,6 +175,7 @@
 };
 
 &pwm3 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi
index bb6dbfd5546b..938a32ced88d 100644
--- a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi
@@ -549,7 +549,6 @@
 &pwm5 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm5>;
-	#pwm-cells = <3>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index 5379a03391bd..2b088f210331 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -131,16 +131,6 @@
 		clock-output-names = "ipp_di1";
 	};
 
-	tempmon: tempmon {
-		compatible = "fsl,imx6ul-tempmon", "fsl,imx6sx-tempmon";
-		interrupt-parent = <&gpc>;
-		interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-		fsl,tempmon = <&anatop>;
-		nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
-		nvmem-cell-names = "calib", "temp_grade";
-		clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>;
-	};
-
 	pmu {
 		compatible = "arm,cortex-a7-pmu";
 		interrupt-parent = <&gpc>;
@@ -351,6 +341,31 @@
 					dma-names = "rx", "tx";
 					status = "disabled";
 				};
+
+				asrc: asrc@2034000 {
+					compatible = "fsl,imx6ul-asrc", "fsl,imx53-asrc";
+					reg = <0x2034000 0x4000>;
+					interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clks IMX6UL_CLK_ASRC_IPG>,
+						<&clks IMX6UL_CLK_ASRC_MEM>, <&clks 0>,
+						<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+						<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+						<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
+						<&clks IMX6UL_CLK_SPDIF>, <&clks 0>, <&clks 0>,
+						<&clks IMX6UL_CLK_SPBA>;
+					clock-names = "mem", "ipg", "asrck_0",
+						"asrck_1", "asrck_2", "asrck_3", "asrck_4",
+						"asrck_5", "asrck_6", "asrck_7", "asrck_8",
+						"asrck_9", "asrck_a", "asrck_b", "asrck_c",
+						"asrck_d", "asrck_e", "asrck_f", "spba";
+					dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>,
+						<&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
+					dma-names = "rxa", "rxb", "rxc",
+						    "txa", "txb", "txc";
+					fsl,asrc-rate  = <48000>;
+					fsl,asrc-width = <16>;
+					status = "okay";
+				};
 			};
 
 			tsc: tsc@2040000 {
@@ -371,7 +386,7 @@
 				clocks = <&clks IMX6UL_CLK_PWM1>,
 					 <&clks IMX6UL_CLK_PWM1>;
 				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
@@ -382,7 +397,7 @@
 				clocks = <&clks IMX6UL_CLK_PWM2>,
 					 <&clks IMX6UL_CLK_PWM2>;
 				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
@@ -393,7 +408,7 @@
 				clocks = <&clks IMX6UL_CLK_PWM3>,
 					 <&clks IMX6UL_CLK_PWM3>;
 				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
@@ -404,7 +419,7 @@
 				clocks = <&clks IMX6UL_CLK_PWM4>,
 					 <&clks IMX6UL_CLK_PWM4>;
 				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
@@ -612,6 +627,16 @@
 					anatop-min-voltage = <725000>;
 					anatop-max-voltage = <1450000>;
 				};
+
+				tempmon: tempmon {
+					compatible = "fsl,imx6ul-tempmon", "fsl,imx6sx-tempmon";
+					interrupt-parent = <&gpc>;
+					interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+					fsl,tempmon = <&anatop>;
+					nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+					nvmem-cell-names = "calib", "temp_grade";
+					clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>;
+				};
 			};
 
 			usbphy1: usbphy@20c9000 {
@@ -734,7 +759,7 @@
 				clocks = <&clks IMX6UL_CLK_PWM5>,
 					 <&clks IMX6UL_CLK_PWM5>;
 				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
@@ -745,7 +770,7 @@
 				clocks = <&clks IMX6UL_CLK_PWM6>,
 					 <&clks IMX6UL_CLK_PWM6>;
 				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
@@ -756,7 +781,7 @@
 				clocks = <&clks IMX6UL_CLK_PWM7>,
 					 <&clks IMX6UL_CLK_PWM7>;
 				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
@@ -767,7 +792,7 @@
 				clocks = <&clks IMX6UL_CLK_PWM8>,
 					 <&clks IMX6UL_CLK_PWM8>;
 				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 		};
@@ -861,7 +886,7 @@
 				status = "disabled";
 			};
 
-			usdhc1: usdhc@2190000 {
+			usdhc1: mmc@2190000 {
 				compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
 				reg = <0x02190000 0x4000>;
 				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
@@ -875,7 +900,7 @@
 				status = "disabled";
 			};
 
-			usdhc2: usdhc@2194000 {
+			usdhc2: mmc@2194000 {
 				compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
 				reg = <0x02194000 0x4000>;
 				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
@@ -948,7 +973,7 @@
 				status = "disabled";
 			};
 
-			ocotp: ocotp-ctrl@21bc000 {
+			ocotp: efuse@21bc000 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 				compatible = "fsl,imx6ul-ocotp", "syscon";
diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi
index 9145c536d71a..6cf95939121d 100644
--- a/arch/arm/boot/dts/imx6ull-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi
@@ -145,25 +145,21 @@
 &pwm4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
-	#pwm-cells = <3>;
 };
 
 &pwm5 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm5>;
-	#pwm-cells = <3>;
 };
 
 &pwm6 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm6>;
-	#pwm-cells = <3>;
 };
 
 &pwm7 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm7>;
-	#pwm-cells = <3>;
 };
 
 &sdma {
diff --git a/arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dts b/arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dts
new file mode 100644
index 000000000000..ecbb2cc5b9ab
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Linumiz
+ * Author: Parthiban Nallathambi <parthiban@linumiz.com>
+ */
+
+/dts-v1/;
+#include "imx6ull.dtsi"
+#include "imx6ull-myir-mys-6ulx.dtsi"
+
+/ {
+	model = "MYiR i.MX6ULL MYS-6ULX Single Board Computer with NAND";
+	compatible = "myir,imx6ull-mys-6ulx-eval", "fsl,imx6ull";
+};
+
+&gpmi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-myir-mys-6ulx.dtsi b/arch/arm/boot/dts/imx6ull-myir-mys-6ulx.dtsi
new file mode 100644
index 000000000000..d03694feaf5c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-myir-mys-6ulx.dtsi
@@ -0,0 +1,238 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Linumiz
+ * Author: Parthiban Nallathambi <parthiban@linumiz.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "MYiR MYS-6ULX Single Board Computer";
+	compatible = "fsl,imx6ull";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	reg_vdd_5v: regulator-vdd-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_vdd_3v3: regulator-vdd-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&reg_vdd_5v>;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	phy-supply = <&reg_vdd_3v3>;
+	status = "okay";
+
+	mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			reg = <0>;
+			interrupt-parent = <&gpio5>;
+			interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
+		};
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg1_id>;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_vdd_3v3>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	keep-power-in-suspend;
+	vmmc-supply = <&reg_vdd_3v3>;
+};
+
+&iomuxc {
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x1b0b0
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
+			MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_CLE__RAWNAND_CLE		0x0b0b1
+			MX6UL_PAD_NAND_ALE__RAWNAND_ALE		0x0b0b1
+			MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B	0x0b0b1
+			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B	0x0b000
+			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B	0x0b0b1
+			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B	0x0b0b1
+			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B	0x0b0b1
+			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00	0x0b0b1
+			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01	0x0b0b1
+			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02	0x0b0b1
+			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03	0x0b0b1
+			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04	0x0b0b1
+			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05	0x0b0b1
+			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06	0x0b0b1
+			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07	0x0b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_usb_otg1_id: usbotg1idgrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170b9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100b9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170b9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170b9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170b9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x170f9
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x100f9
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x170f9
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x170f9
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x170f9
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x170f9
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x10069
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x17059
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x17059
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x17059
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x17059
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x17059
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x17059
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x17059
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x17059
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x17059
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100b9
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170b9
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170b9
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170b9
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170b9
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170b9
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x170b9
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x170b9
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x170b9
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100f9
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170f9
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170f9
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170f9
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170f9
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170f9
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x170f9
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x170f9
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x170f9
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x170f9
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index f6bb35d3ce51..1cfaf410aa43 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -147,16 +147,6 @@
 		};
 	};
 
-	tempmon: tempmon {
-		compatible = "fsl,imx7d-tempmon";
-		interrupt-parent = <&gpc>;
-		interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-		fsl,tempmon = <&anatop>;
-		nvmem-cells = <&tempmon_calib>,	<&fuse_grade>;
-		nvmem-cell-names = "calib", "temp_grade";
-		clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>;
-	};
-
 	timer {
 		compatible = "arm,armv7-timer";
 		interrupt-parent = <&intc>;
@@ -536,7 +526,7 @@
 				};
 			};
 
-			ocotp: ocotp-ctrl@30350000 {
+			ocotp: efuse@30350000 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 				compatible = "fsl,imx7d-ocotp", "syscon";
@@ -586,6 +576,16 @@
 					anatop-max-voltage = <1300000>;
 					anatop-enable-bit = <0>;
 				};
+
+				tempmon: tempmon {
+					compatible = "fsl,imx7d-tempmon";
+					interrupt-parent = <&gpc>;
+					interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+					fsl,tempmon = <&anatop>;
+					nvmem-cells = <&tempmon_calib>,	<&fuse_grade>;
+					nvmem-cell-names = "calib", "temp_grade";
+					clocks = <&clks IMX7D_PLL_SYS_MAIN_CLK>;
+				};
 			};
 
 			snvs: snvs@30370000 {
@@ -1126,7 +1126,7 @@
 				reg = <0x30b30200 0x200>;
 			};
 
-			usdhc1: usdhc@30b40000 {
+			usdhc1: mmc@30b40000 {
 				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
 				reg = <0x30b40000 0x10000>;
 				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
@@ -1138,7 +1138,7 @@
 				status = "disabled";
 			};
 
-			usdhc2: usdhc@30b50000 {
+			usdhc2: mmc@30b50000 {
 				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
 				reg = <0x30b50000 0x10000>;
 				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
@@ -1150,7 +1150,7 @@
 				status = "disabled";
 			};
 
-			usdhc3: usdhc@30b60000 {
+			usdhc3: mmc@30b60000 {
 				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
 				reg = <0x30b60000 0x10000>;
 				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/imx7ulp.dtsi
index f7c4878534c8..367439639da9 100644
--- a/arch/arm/boot/dts/imx7ulp.dtsi
+++ b/arch/arm/boot/dts/imx7ulp.dtsi
@@ -452,7 +452,7 @@
 			reg = <0x410a3000 0x1000>;
 		};
 
-		ocotp: ocotp-ctrl@410a6000 {
+		ocotp: efuse@410a6000 {
 			compatible = "fsl,imx7ulp-ocotp", "syscon";
 			reg = <0x410a6000 0x4000>;
 			clocks = <&scg1 IMX7ULP_CLK_DUMMY>;
diff --git a/arch/arm/boot/dts/infinity-msc313-breadbee_crust.dts b/arch/arm/boot/dts/infinity-msc313-breadbee_crust.dts
new file mode 100644
index 000000000000..f24c5580d3e4
--- /dev/null
+++ b/arch/arm/boot/dts/infinity-msc313-breadbee_crust.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ */
+
+/dts-v1/;
+#include "infinity-msc313.dtsi"
+
+/ {
+	model = "BreadBee Crust";
+	compatible = "thingyjp,breadbee-crust", "mstar,infinity";
+
+	aliases {
+		serial0 = &pm_uart;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&pm_uart {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/infinity-msc313.dtsi b/arch/arm/boot/dts/infinity-msc313.dtsi
new file mode 100644
index 000000000000..42f2b5552c77
--- /dev/null
+++ b/arch/arm/boot/dts/infinity-msc313.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2020 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ */
+
+#include "infinity.dtsi"
+
+/ {
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x4000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/infinity.dtsi b/arch/arm/boot/dts/infinity.dtsi
new file mode 100644
index 000000000000..cd911adef014
--- /dev/null
+++ b/arch/arm/boot/dts/infinity.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2020 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ */
+
+#include "mstar-v7.dtsi"
+
+&imi {
+	reg = <0xa0000000 0x16000>;
+};
diff --git a/arch/arm/boot/dts/infinity3-msc313e-breadbee.dts b/arch/arm/boot/dts/infinity3-msc313e-breadbee.dts
new file mode 100644
index 000000000000..1f93401c8530
--- /dev/null
+++ b/arch/arm/boot/dts/infinity3-msc313e-breadbee.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ */
+
+/dts-v1/;
+#include "infinity3-msc313e.dtsi"
+
+/ {
+	model = "BreadBee";
+	compatible = "thingyjp,breadbee", "mstar,infinity3";
+
+	aliases {
+		serial0 = &pm_uart;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&pm_uart {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/infinity3-msc313e.dtsi b/arch/arm/boot/dts/infinity3-msc313e.dtsi
new file mode 100644
index 000000000000..4e7239afd823
--- /dev/null
+++ b/arch/arm/boot/dts/infinity3-msc313e.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2020 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ */
+
+#include "infinity3.dtsi"
+
+/ {
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x4000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/infinity3.dtsi b/arch/arm/boot/dts/infinity3.dtsi
new file mode 100644
index 000000000000..9b918c802654
--- /dev/null
+++ b/arch/arm/boot/dts/infinity3.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2020 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ */
+
+#include "infinity.dtsi"
+
+&imi {
+	reg = <0xa0000000 0x20000>;
+};
diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts
index db640bab8c1d..8b3d64c913d8 100644
--- a/arch/arm/boot/dts/keystone-k2g-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2g-evm.dts
@@ -402,7 +402,7 @@
 
 &gbe0 {
 	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii-id";
+	phy-mode = "rgmii-rxid";
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/kirkwood-b3.dts b/arch/arm/boot/dts/kirkwood-b3.dts
index 17f48f88a983..a7636fe28501 100644
--- a/arch/arm/boot/dts/kirkwood-b3.dts
+++ b/arch/arm/boot/dts/kirkwood-b3.dts
@@ -9,7 +9,7 @@
  * L2 cache. If your B3 silently fails to boot, u-boot is probably too
  * old. Either upgrade, or consider the following email:
  *
- * http://lists.debian.org/debian-arm/2012/08/msg00128.html
+ * https://lists.debian.org/debian-arm/2012/08/msg00128.html
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index 760a68c163c8..069af9a19bb6 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -59,6 +59,7 @@
 		ethernet0 = &enet0;
 		ethernet1 = &enet1;
 		ethernet2 = &enet2;
+		rtc1 = &ftm_alarm0;
 		serial0 = &lpuart0;
 		serial1 = &lpuart1;
 		serial2 = &lpuart2;
@@ -772,7 +773,7 @@
 			fsl,tmr-prsc    = <2>;
 			fsl,tmr-add     = <0xaaaaaaab>;
 			fsl,tmr-fiper1  = <999999995>;
-			fsl,tmr-fiper2  = <99990>;
+			fsl,tmr-fiper2  = <999999995>;
 			fsl,max-adj     = <499999999>;
 			fsl,extts-fifo;
 		};
@@ -1002,5 +1003,19 @@
 			big-endian;
 		};
 
+		rcpm: power-controller@1ee2140 {
+			compatible = "fsl,ls1021a-rcpm", "fsl,qoriq-rcpm-2.1+";
+			reg = <0x0 0x1ee2140 0x0 0x8>;
+			#fsl,rcpm-wakeup-cells = <2>;
+		};
+
+		ftm_alarm0: timer0@29d0000 {
+			compatible = "fsl,ls1021a-ftm-alarm";
+			reg = <0x0 0x29d0000 0x0 0x10000>;
+			reg-names = "ftm";
+			fsl,rcpm-wakeup = <&rcpm 0x20000 0x0>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			big-endian;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/mercury5-ssc8336n-midrived08.dts b/arch/arm/boot/dts/mercury5-ssc8336n-midrived08.dts
new file mode 100644
index 000000000000..f24bd8cb8e60
--- /dev/null
+++ b/arch/arm/boot/dts/mercury5-ssc8336n-midrived08.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2020 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ */
+
+/dts-v1/;
+#include "mercury5-ssc8336n.dtsi"
+
+/ {
+	model = "70mai Midrive D08";
+	compatible = "70mai,midrived08", "mstar,mercury5";
+
+	aliases {
+		serial0 = &pm_uart;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&pm_uart {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mercury5-ssc8336n.dtsi b/arch/arm/boot/dts/mercury5-ssc8336n.dtsi
new file mode 100644
index 000000000000..7d4a4630c25c
--- /dev/null
+++ b/arch/arm/boot/dts/mercury5-ssc8336n.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2020 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ */
+
+#include "mercury5.dtsi"
+
+/ {
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x4000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/mercury5.dtsi b/arch/arm/boot/dts/mercury5.dtsi
new file mode 100644
index 000000000000..a7d0dd9d6132
--- /dev/null
+++ b/arch/arm/boot/dts/mercury5.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2020 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ */
+
+#include "mstar-v7.dtsi"
+
+&imi {
+	reg = <0xa0000000 0x20000>;
+};
diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi
index ae89deaa8c9c..eadb0832bcfc 100644
--- a/arch/arm/boot/dts/meson.dtsi
+++ b/arch/arm/boot/dts/meson.dtsi
@@ -11,7 +11,7 @@
 	#size-cells = <1>;
 	interrupt-parent = <&gic>;
 
-	L2: l2-cache-controller@c4200000 {
+	L2: cache-controller@c4200000 {
 		compatible = "arm,pl310-cache";
 		reg = <0xc4200000 0x1000>;
 		cache-unified;
@@ -140,6 +140,13 @@
 				status = "disabled";
 			};
 
+			sdhc: mmc@8e00 {
+				compatible = "amlogic,meson-mx-sdhc";
+				reg = <0x8e00 0x42>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
 			gpio_intc: interrupt-controller@9880 {
 				compatible = "amlogic,meson-gpio-intc";
 				reg = <0x9880 0x10>;
diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
index eedb92526968..277c0bb10453 100644
--- a/arch/arm/boot/dts/meson8.dtsi
+++ b/arch/arm/boot/dts/meson8.dtsi
@@ -6,6 +6,7 @@
 #include <dt-bindings/clock/meson8-ddr-clkc.h>
 #include <dt-bindings/clock/meson8b-clkc.h>
 #include <dt-bindings/gpio/meson8-gpio.h>
+#include <dt-bindings/power/meson8-power.h>
 #include <dt-bindings/reset/amlogic,meson8b-clkc-reset.h>
 #include <dt-bindings/reset/amlogic,meson8b-reset.h>
 #include "meson.dtsi"
@@ -385,6 +386,15 @@
 			};
 		};
 
+		sdxc_b_pins: sdxc-b {
+			mux {
+				groups = "sdxc_d0_b", "sdxc_d13_b",
+					 "sdxc_clk_b", "sdxc_cmd_b";
+				function = "sdxc_b";
+				bias-pull-up;
+			};
+		};
+
 		spi_nor_pins: nor {
 			mux {
 				groups = "nor_d", "nor_q", "nor_c", "nor_cs";
@@ -454,6 +464,8 @@
 &ethmac {
 	clocks = <&clkc CLKID_ETH>;
 	clock-names = "stmmaceth";
+
+	power-domains = <&pwrc PWRC_MESON8_ETHERNET_MEM_ID>;
 };
 
 &gpio_intc {
@@ -469,6 +481,16 @@
 		#clock-cells = <1>;
 		#reset-cells = <1>;
 	};
+
+	pwrc: power-controller {
+		compatible = "amlogic,meson8-pwrc";
+		#power-domain-cells = <1>;
+		amlogic,ao-sysctrl = <&pmu>;
+		clocks = <&clkc CLKID_VPU>;
+		clock-names = "vpu";
+		assigned-clocks = <&clkc CLKID_VPU>;
+		assigned-clock-rates = <364285714>;
+	};
 };
 
 &hwrng {
@@ -547,6 +569,16 @@
 	nvmem-cell-names = "temperature_calib";
 };
 
+&sdhc {
+	compatible = "amlogic,meson8-sdhc", "amlogic,meson-mx-sdhc";
+	clocks = <&xtal>,
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>,
+		 <&clkc CLKID_FCLK_DIV5>,
+		 <&clkc CLKID_SDHC>;
+	clock-names = "clkin0", "clkin1", "clkin2", "clkin3", "pclk";
+};
+
 &sdio {
 	compatible = "amlogic,meson8-sdio", "amlogic,meson-mx-sdio";
 	clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>;
diff --git a/arch/arm/boot/dts/meson8b-ec100.dts b/arch/arm/boot/dts/meson8b-ec100.dts
index 163a200d5a7b..ed06102a4014 100644
--- a/arch/arm/boot/dts/meson8b-ec100.dts
+++ b/arch/arm/boot/dts/meson8b-ec100.dts
@@ -27,6 +27,11 @@
 		reg = <0x40000000 0x40000000>;
 	};
 
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys-polled";
 		#address-cells = <1>;
@@ -299,6 +304,26 @@
 	vref-supply = <&vcc_1v8>;
 };
 
+&sdhc {
+	status = "okay";
+
+	pinctrl-0 = <&sdxc_c_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <8>;
+	max-frequency = <50000000>;
+
+	cap-mmc-highspeed;
+	disable-wp;
+	non-removable;
+	no-sdio;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_3v3>;
+};
+
 &sdio {
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts
index cb21ac9f517c..0c26467de4d0 100644
--- a/arch/arm/boot/dts/meson8b-odroidc1.dts
+++ b/arch/arm/boot/dts/meson8b-odroidc1.dts
@@ -15,6 +15,7 @@
 	aliases {
 		serial0 = &uart_AO;
 		mmc0 = &sd_card_slot;
+		mmc1 = &sdhc;
 	};
 
 	chosen {
@@ -26,6 +27,11 @@
 		reg = <0x40000000 0x40000000>;
 	};
 
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		blue {
@@ -310,6 +316,26 @@
 	vref-supply = <&vcc_1v8>;
 };
 
+&sdhc {
+	status = "okay";
+
+	pinctrl-0 = <&sdxc_c_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <8>;
+	max-frequency = <100000000>;
+
+	disable-wp;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	no-sdio;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+};
+
 &sdio {
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index ba36168b9c1b..2401cdf5f751 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -7,6 +7,7 @@
 #include <dt-bindings/clock/meson8-ddr-clkc.h>
 #include <dt-bindings/clock/meson8b-clkc.h>
 #include <dt-bindings/gpio/meson8b-gpio.h>
+#include <dt-bindings/power/meson8-power.h>
 #include <dt-bindings/reset/amlogic,meson8b-reset.h>
 #include <dt-bindings/reset/amlogic,meson8b-clkc-reset.h>
 #include "meson.dtsi"
@@ -362,6 +363,16 @@
 			};
 		};
 
+		sdxc_c_pins: sdxc-c {
+			mux {
+				groups = "sdxc_d0_c", "sdxc_d13_c",
+					 "sdxc_d47_c", "sdxc_clk_c",
+					 "sdxc_cmd_c";
+				function = "sdxc_c";
+				bias-pull-up;
+			};
+		};
+
 		pwm_c1_pins: pwm-c1 {
 			mux {
 				groups = "pwm_c1";
@@ -433,6 +444,8 @@
 
 	resets = <&reset RESET_ETHERNET>;
 	reset-names = "stmmaceth";
+
+	power-domains = <&pwrc PWRC_MESON8_ETHERNET_MEM_ID>;
 };
 
 &gpio_intc {
@@ -449,6 +462,30 @@
 		#clock-cells = <1>;
 		#reset-cells = <1>;
 	};
+
+	pwrc: power-controller {
+		compatible = "amlogic,meson8b-pwrc";
+		#power-domain-cells = <1>;
+		amlogic,ao-sysctrl = <&pmu>;
+		resets = <&reset RESET_DBLK>,
+			 <&reset RESET_PIC_DC>,
+			 <&reset RESET_HDMI_APB>,
+			 <&reset RESET_HDMI_SYSTEM_RESET>,
+			 <&reset RESET_VENCI>,
+			 <&reset RESET_VENCP>,
+			 <&reset RESET_VDAC_4>,
+			 <&reset RESET_VENCL>,
+			 <&reset RESET_VIU>,
+			 <&reset RESET_VENC>,
+			 <&reset RESET_RDMA>;
+		reset-names = "dblk", "pic_dc", "hdmi_apb", "hdmi_system",
+			      "venci", "vencp", "vdac", "vencl", "viu",
+			      "venc", "rdma";
+		clocks = <&clkc CLKID_VPU>;
+		clock-names = "vpu";
+		assigned-clocks = <&clkc CLKID_VPU>;
+		assigned-clock-rates = <182142857>;
+	};
 };
 
 &hwrng {
@@ -527,6 +564,16 @@
 	nvmem-cell-names = "temperature_calib";
 };
 
+&sdhc {
+	compatible = "amlogic,meson8-sdhc", "amlogic,meson-mx-sdhc";
+	clocks = <&xtal>,
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>,
+		 <&clkc CLKID_FCLK_DIV5>,
+		 <&clkc CLKID_SDHC>;
+	clock-names = "clkin0", "clkin1", "clkin2", "clkin3", "pclk";
+};
+
 &sdio {
 	compatible = "amlogic,meson8b-sdio", "amlogic,meson-mx-sdio";
 	clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>;
diff --git a/arch/arm/boot/dts/meson8m2.dtsi b/arch/arm/boot/dts/meson8m2.dtsi
index 2397ba06d608..6725dd9fd825 100644
--- a/arch/arm/boot/dts/meson8m2.dtsi
+++ b/arch/arm/boot/dts/meson8m2.dtsi
@@ -61,10 +61,33 @@
 	};
 };
 
+&pwrc {
+	compatible = "amlogic,meson8m2-pwrc";
+	resets = <&reset RESET_DBLK>,
+		 <&reset RESET_PIC_DC>,
+		 <&reset RESET_HDMI_APB>,
+		 <&reset RESET_HDMI_SYSTEM_RESET>,
+		 <&reset RESET_VENCI>,
+		 <&reset RESET_VENCP>,
+		 <&reset RESET_VDAC_4>,
+		 <&reset RESET_VENCL>,
+		 <&reset RESET_VIU>,
+		 <&reset RESET_VENC>,
+		 <&reset RESET_RDMA>;
+	reset-names = "dblk", "pic_dc", "hdmi_apb", "hdmi_system", "venci",
+		      "vencp", "vdac", "vencl", "viu", "venc", "rdma";
+	assigned-clocks = <&clkc CLKID_VPU>;
+	assigned-clock-rates = <364000000>;
+};
+
 &saradc {
 	compatible = "amlogic,meson8m2-saradc", "amlogic,meson-saradc";
 };
 
+&sdhc {
+	compatible = "amlogic,meson8m2-sdhc", "amlogic,meson-mx-sdhc";
+};
+
 &usb0_phy {
 	compatible = "amlogic,meson8m2-usb2-phy", "amlogic,meson-mx-usb2-phy";
 };
diff --git a/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts b/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts
index 6cfa0d4a1884..f1a41152e9dd 100644
--- a/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts
+++ b/arch/arm/boot/dts/mmp2-olpc-xo-1-75.dts
@@ -57,30 +57,12 @@
 			linux,code = <SW_TABLET_MODE>;
 			wakeup-source;
 		};
-
-		microphone_insert {
-			label = "Microphone Plug";
-			gpios = <&gpio 96 GPIO_ACTIVE_HIGH>;
-			linux,input-type = <EV_SW>;
-			linux,code = <SW_MICROPHONE_INSERT>;
-			debounce-interval = <100>;
-			wakeup-source;
-		};
-
-		headphone_insert {
-			label = "Headphone Plug";
-			gpios = <&gpio 97 GPIO_ACTIVE_HIGH>;
-			linux,input-type = <EV_SW>;
-			linux,code = <SW_HEADPHONE_INSERT>;
-			debounce-interval = <100>;
-			wakeup-source;
-		};
 	};
 
-	camera_i2c {
+	i2c {
 		compatible = "i2c-gpio";
-		gpios = <&gpio 109 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>,
-			<&gpio 108 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		sda-gpios = <&gpio 109 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio 108 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		i2c-gpio,timeout-ms = <1000>;
@@ -123,6 +105,18 @@
 		reset-gpios = <&gpio 58 GPIO_ACTIVE_HIGH>;
 	};
 
+	sound-card {
+		compatible = "audio-graph-card";
+		label = "OLPC XO";
+		dais = <&sspa0_dai>;
+		routing = "Headphones", "HPOL",
+			  "Headphones", "HPOR",
+			  "MIC2", "Mic Jack";
+		widgets = "Headphone", "Headphones", "Microphone", "Mic Jack";
+		hp-det-gpio = <&gpio 97 GPIO_ACTIVE_HIGH>;
+		mic-det-gpio = <&gpio 96 GPIO_ACTIVE_HIGH>;
+	};
+
 	soc {
 		axi@d4200000 {
 			ap-sp@d4290000 {
@@ -197,6 +191,14 @@
 		compatible = "realtek,alc5631";
 		reg = <0x1a>;
 		status = "okay";
+
+		port {
+			rt5631_0: endpoint {
+				mclk-fs = <256>;
+				clocks = <&audio_clk 0>;
+				remote-endpoint = <&sspa0_0>;
+			};
+		};
 	};
 };
 
@@ -221,7 +223,8 @@
 };
 
 &ssp3 {
-	#address-cells = <0>;
+	/delete-property/ #address-cells;
+	/delete-property/ #size-cells;
 	spi-slave;
 	status = "okay";
 	ready-gpio = <&gpio 125 GPIO_ACTIVE_HIGH>;
@@ -242,3 +245,34 @@
 		};
 	};
 };
+
+&asram {
+	status = "okay";
+};
+
+&adma0 {
+	status = "okay";
+};
+
+&audio_clk {
+	status = "okay";
+};
+
+&sspa0 {
+	status = "okay";
+	dmas = <&adma0 0>, <&adma0 1>;
+	dma-names = "tx", "rx";
+
+	sspa0_dai: port {
+		sspa0_0: endpoint {
+			remote-endpoint = <&rt5631_0>;
+			frame-master;
+			bitclock-master;
+			dai-format = "i2s";
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi
index 4306f3a6742b..445bdcd50b9e 100644
--- a/arch/arm/boot/dts/mmp2.dtsi
+++ b/arch/arm/boot/dts/mmp2.dtsi
@@ -5,6 +5,7 @@
  */
 
 #include <dt-bindings/clock/marvell,mmp2.h>
+#include <dt-bindings/power/marvell,mmp2.h>
 
 / {
 	#address-cells = <1>;
@@ -38,6 +39,17 @@
 			reg = <0xd4200000 0x00200000>;
 			ranges;
 
+			gpu: gpu@d420d000 {
+				compatible = "vivante,gc";
+				reg = <0xd420d000 0x4000>;
+				interrupts = <8>;
+				status = "disabled";
+				clocks = <&soc_clocks MMP2_CLK_GPU_3D>,
+					 <&soc_clocks MMP2_CLK_GPU_BUS>;
+				clock-names = "core", "bus";
+				power-domains = <&soc_clocks MMP2_POWER_DOMAIN_GPU>;
+			};
+
 			intc: interrupt-controller@d4282000 {
 				compatible = "mrvl,mmp2-intc";
 				interrupt-controller;
@@ -192,6 +204,63 @@
 				clock-output-names = "mclk";
 				status = "disabled";
 			};
+
+			adma0: dma-controller@d42a0800 {
+				compatible = "marvell,adma-1.0";
+				reg = <0xd42a0800 0x100>;
+				interrupts = <48>;
+				#dma-cells = <1>;
+				asram = <&asram>;
+				iram = <&asram>;
+				status = "disabled";
+			};
+
+			adma1: dma-controller@d42a0900 {
+				compatible = "marvell,adma-1.0";
+				reg = <0xd42a0900 0x100>;
+				interrupts = <48>;
+				#dma-cells = <1>;
+				status = "disabled";
+			};
+
+			audio_clk: clocks@d42a0c30 {
+				compatible = "marvell,mmp2-audio-clock";
+				reg = <0xd42a0c30 0x10>;
+				clock-names = "audio", "vctcxo", "i2s0", "i2s1";
+				clocks = <&soc_clocks MMP2_CLK_AUDIO>,
+					 <&soc_clocks MMP2_CLK_VCTCXO>,
+					 <&soc_clocks MMP2_CLK_I2S0>,
+					 <&soc_clocks MMP2_CLK_I2S1>;
+				power-domains = <&soc_clocks MMP2_POWER_DOMAIN_AUDIO>;
+				#clock-cells = <1>;
+				status = "disabled";
+			};
+
+			sspa0: audio-controller@d42a0c00 {
+				compatible = "marvell,mmp-sspa";
+				reg = <0xd42a0c00 0x30>,
+				      <0xd42a0c80 0x30>;
+				interrupts = <2>;
+				clock-names = "audio", "bitclk";
+				clocks = <&soc_clocks MMP2_CLK_AUDIO>,
+					 <&audio_clk 1>;
+				power-domains = <&soc_clocks MMP2_POWER_DOMAIN_AUDIO>;
+				#sound-dai-cells = <0>;
+				status = "disabled";
+			};
+
+			sspa1: audio-controller@d42a0d00 {
+				compatible = "marvell,mmp-sspa";
+				reg = <0xd42a0d00 0x30>,
+				      <0xd42a0d80 0x30>;
+				interrupts = <3>;
+				clock-names = "audio", "bitclk";
+				clocks = <&soc_clocks MMP2_CLK_AUDIO>,
+					 <&audio_clk 2>;
+				power-domains = <&soc_clocks MMP2_POWER_DOMAIN_AUDIO>;
+				#sound-dai-cells = <0>;
+				status = "disabled";
+			};
 		};
 
 		apb@d4000000 {	/* APB */
@@ -201,6 +270,14 @@
 			reg = <0xd4000000 0x00200000>;
 			ranges;
 
+			dma-controller@d4000000 {
+				compatible = "marvell,pdma-1.0";
+				reg = <0xd4000000 0x10000>;
+				interrupts = <48>;
+				#dma-channels = <16>;
+				status = "disabled";
+			};
+
 			timer0: timer@d4014000 {
 				compatible = "mrvl,mmp-timer";
 				reg = <0xd4014000 0x100>;
@@ -413,14 +490,24 @@
 			};
 		};
 
+		asram: sram@e0000000 {
+			compatible = "mmio-sram";
+			reg = <0xe0000000 0x10000>;
+			ranges = <0 0xe0000000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+		};
+
 		soc_clocks: clocks {
 			compatible = "marvell,mmp2-clock";
-			reg = <0xd4050000 0x1000>,
+			reg = <0xd4050000 0x2000>,
 			      <0xd4282800 0x400>,
 			      <0xd4015000 0x1000>;
 			reg-names = "mpmu", "apmu", "apbc";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
+			#power-domain-cells = <1>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/mmp3-dell-ariel.dts b/arch/arm/boot/dts/mmp3-dell-ariel.dts
index b0ec14c42164..fe3b1cd695ee 100644
--- a/arch/arm/boot/dts/mmp3-dell-ariel.dts
+++ b/arch/arm/boot/dts/mmp3-dell-ariel.dts
@@ -114,3 +114,11 @@
 	cs-gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
+
+&gpu_2d {
+	status = "okay";
+};
+
+&gpu_3d {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mmp3.dtsi b/arch/arm/boot/dts/mmp3.dtsi
index 57231d49d938..cc4efd0efabd 100644
--- a/arch/arm/boot/dts/mmp3.dtsi
+++ b/arch/arm/boot/dts/mmp3.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include <dt-bindings/clock/marvell,mmp2.h>
+#include <dt-bindings/power/marvell,mmp2.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
 / {
@@ -310,6 +311,30 @@
 				clock-output-names = "mclk";
 				status = "disabled";
 			};
+
+			gpu_3d: gpu@d420d000 {
+				compatible = "vivante,gc";
+				reg = <0xd420d000 0x2000>;
+				interrupt-parent = <&gpu_mux>;
+				interrupts = <0>;
+				status = "disabled";
+				clocks = <&soc_clocks MMP3_CLK_GPU_3D>,
+					 <&soc_clocks MMP3_CLK_GPU_BUS>;
+				clock-names = "core", "bus";
+				power-domains = <&soc_clocks MMP2_POWER_DOMAIN_GPU>;
+			};
+
+			gpu_2d: gpu@d420f000 {
+				compatible = "vivante,gc";
+				reg = <0xd420f000 0x2000>;
+				interrupt-parent = <&gpu_mux>;
+				interrupts = <2>;
+				status = "disabled";
+				clocks = <&soc_clocks MMP3_CLK_GPU_2D>,
+					 <&soc_clocks MMP3_CLK_GPU_BUS>;
+				clock-names = "core", "bus";
+				power-domains = <&soc_clocks MMP2_POWER_DOMAIN_GPU>;
+			};
 		};
 
 		apb@d4000000 {
diff --git a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
index e39eee628afd..08a7d3ce383f 100644
--- a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
+++ b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
@@ -13,8 +13,10 @@
 		#interrupt-cells = <2>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		spi-max-frequency = <3000000>;
+		spi-max-frequency = <9600000>;
 		spi-cs-high;
+		spi-cpol;
+		spi-cpha;
 
 		cpcap_adc: adc {
 			compatible = "motorola,mapphone-cpcap-adc";
diff --git a/arch/arm/boot/dts/mstar-v7.dtsi b/arch/arm/boot/dts/mstar-v7.dtsi
new file mode 100644
index 000000000000..3b7b9b793736
--- /dev/null
+++ b/arch/arm/boot/dts/mstar-v7.dtsi
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2020 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+		};
+	};
+
+	arch_timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2)
+				| IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2)
+				| IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2)
+				| IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2)
+				| IRQ_TYPE_LEVEL_LOW)>;
+		/*
+		 * we shouldn't need this but the vendor
+		 * u-boot is broken
+		 */
+		clock-frequency = <6000000>;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>;
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x16001000 0x16001000 0x00007000>,
+			 <0x1f000000 0x1f000000 0x00400000>,
+			 <0xa0000000 0xa0000000 0x20000>;
+
+		gic: interrupt-controller@16001000 {
+			compatible = "arm,cortex-a7-gic";
+			reg = <0x16001000 0x1000>,
+			      <0x16002000 0x2000>,
+			      <0x16004000 0x2000>,
+			      <0x16006000 0x2000>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2)
+					| IRQ_TYPE_LEVEL_LOW)>;
+		};
+
+		riu: bus@1f000000 {
+			compatible = "simple-bus";
+			reg = <0x1f000000 0x00400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x1f000000 0x00400000>;
+
+			pmsleep: syscon@1c00 {
+				compatible = "mstar,msc313-pmsleep", "syscon";
+				reg = <0x1c00 0x100>;
+			};
+
+			reboot {
+				compatible = "syscon-reboot";
+				regmap = <&pmsleep>;
+				offset = <0xb8>;
+				mask = <0x79>;
+			};
+
+			l3bridge: l3bridge@204400 {
+				compatible = "mstar,l3bridge";
+				reg = <0x204400 0x200>;
+			};
+
+			pm_uart: uart@221000 {
+				compatible = "ns16550a";
+				reg = <0x221000 0x100>;
+				reg-shift = <3>;
+				clock-frequency = <172000000>;
+				status = "disabled";
+			};
+		};
+
+		imi: sram@a0000000 {
+			compatible = "mmio-sram";
+			reg = <0xa0000000 0x10000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi
index 8a5cb44bfe2f..f9c2a9938898 100644
--- a/arch/arm/boot/dts/omap2.dtsi
+++ b/arch/arm/boot/dts/omap2.dtsi
@@ -1,7 +1,7 @@
 /*
  * Device Tree Source for OMAP2 SoC
  *
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2.  This program is licensed "as is" without any warranty of any
diff --git a/arch/arm/boot/dts/omap2420-h4.dts b/arch/arm/boot/dts/omap2420-h4.dts
index 7d660271400d..af964f139abf 100644
--- a/arch/arm/boot/dts/omap2420-h4.dts
+++ b/arch/arm/boot/dts/omap2420-h4.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  */
 /dts-v1/;
 
diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi
index 6c5c7c0e8b94..494bf6972005 100644
--- a/arch/arm/boot/dts/omap2420.dtsi
+++ b/arch/arm/boot/dts/omap2420.dtsi
@@ -1,7 +1,7 @@
 /*
  * Device Tree Source for OMAP2420 SoC
  *
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2.  This program is licensed "as is" without any warranty of any
diff --git a/arch/arm/boot/dts/omap2430-sdp.dts b/arch/arm/boot/dts/omap2430-sdp.dts
index f7e324886642..7d27e907533f 100644
--- a/arch/arm/boot/dts/omap2430-sdp.dts
+++ b/arch/arm/boot/dts/omap2430-sdp.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
  */
 /dts-v1/;
 
diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi
index 6a1f5bb3c06a..d19d8ba3b607 100644
--- a/arch/arm/boot/dts/omap2430.dtsi
+++ b/arch/arm/boot/dts/omap2430.dtsi
@@ -1,7 +1,7 @@
 /*
  * Device Tree Source for OMAP243x SoC
  *
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2.  This program is licensed "as is" without any warranty of any
diff --git a/arch/arm/boot/dts/omap3-beagle-xm-ab.dts b/arch/arm/boot/dts/omap3-beagle-xm-ab.dts
index e498495b8465..cb6968a8bce8 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm-ab.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm-ab.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 #include "omap3-beagle-xm.dts"
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index 125ed933ca75..05077f3c75cd 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
  */
 /dts-v1/;
 
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index dfa158647d91..79bc710c05fc 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  */
 /dts-v1/;
 
diff --git a/arch/arm/boot/dts/omap3-cpu-thermal.dtsi b/arch/arm/boot/dts/omap3-cpu-thermal.dtsi
index 235ecfd61e2d..aee46fa8c055 100644
--- a/arch/arm/boot/dts/omap3-cpu-thermal.dtsi
+++ b/arch/arm/boot/dts/omap3-cpu-thermal.dtsi
@@ -1,7 +1,7 @@
 /*
  * Device Tree Source for OMAP3 SoC CPU thermal
  *
- * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2.  This program is licensed "as is" without any warranty of any
diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts
index e0c0382388f0..c9332195d096 100644
--- a/arch/arm/boot/dts/omap3-evm-37xx.dts
+++ b/arch/arm/boot/dts/omap3-evm-37xx.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
  */
 /dts-v1/;
 
diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts
index 6a94815feb76..5cc0cf7cd16c 100644
--- a/arch/arm/boot/dts/omap3-evm.dts
+++ b/arch/arm/boot/dts/omap3-evm.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
  */
 /dts-v1/;
 
diff --git a/arch/arm/boot/dts/omap3-ha-common.dtsi b/arch/arm/boot/dts/omap3-ha-common.dtsi
index 33132855d517..a010585d0302 100644
--- a/arch/arm/boot/dts/omap3-ha-common.dtsi
+++ b/arch/arm/boot/dts/omap3-ha-common.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  * Copyright (C) 2014 Stefan Roese <sr@denx.de>
  */
 
diff --git a/arch/arm/boot/dts/omap3-ha-lcd.dts b/arch/arm/boot/dts/omap3-ha-lcd.dts
index c9ecbc45c8e2..b3f7f9966c3c 100644
--- a/arch/arm/boot/dts/omap3-ha-lcd.dts
+++ b/arch/arm/boot/dts/omap3-ha-lcd.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  * Copyright (C) 2014 Stefan Roese <sr@denx.de>
  */
 
diff --git a/arch/arm/boot/dts/omap3-ha.dts b/arch/arm/boot/dts/omap3-ha.dts
index 35c4e15abeb7..19e471eb3b4e 100644
--- a/arch/arm/boot/dts/omap3-ha.dts
+++ b/arch/arm/boot/dts/omap3-ha.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  * Copyright (C) 2014 Stefan Roese <sr@denx.de>
  */
 
diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts
index ec9ba04ef43b..9c6a92724590 100644
--- a/arch/arm/boot/dts/omap3-ldp.dts
+++ b/arch/arm/boot/dts/omap3-ldp.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
  */
 /dts-v1/;
 
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 4089d97405c9..bc24e3dc7cda 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -19,7 +19,11 @@
  * but it is not widely used and to prevent kernel crash rather AES is disabled.
  * There is also no runtime detection code if AES is disabled in L3 firewall...
  */
-&aes {
+&aes1_target {
+	status = "disabled";
+};
+
+&aes2_target {
 	status = "disabled";
 };
 
@@ -105,6 +109,14 @@
 			linux,code = <SW_FRONT_PROXIMITY>;
 			linux,can-disable;
 		};
+
+		machine_cover {
+			label = "Machine Cover";
+			gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* 160 */
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_MACHINE_COVER>;
+			linux,can-disable;
+		};
 	};
 
 	isp1707: isp1707 {
@@ -819,10 +831,6 @@
 	pinctrl-0 = <&mmc1_pins>;
 	vmmc-supply = <&vmmc1>;
 	bus-width = <4>;
-	/* For debugging, it is often good idea to remove this GPIO.
-	   It means you can remove back cover (to reboot by removing
-	   battery) and still use the MMC card. */
-	cd-gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* 160 */
 };
 
 /* most boards use vaux3, only some old versions use vmmc2 instead */
diff --git a/arch/arm/boot/dts/omap3-tao3530.dtsi b/arch/arm/boot/dts/omap3-tao3530.dtsi
index f24e2326cfa7..580bfa1931c8 100644
--- a/arch/arm/boot/dts/omap3-tao3530.dtsi
+++ b/arch/arm/boot/dts/omap3-tao3530.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  * Copyright (C) 2014 Stefan Roese <sr@denx.de>
  */
 /dts-v1/;
@@ -8,7 +8,11 @@
 #include "omap34xx.dtsi"
 
 /* Secure omaps have some devices inaccessible depending on the firmware */
-&aes {
+&aes1_target {
+	status = "disabled";
+};
+
+&aes2_target {
 	status = "disabled";
 };
 
diff --git a/arch/arm/boot/dts/omap3-thunder.dts b/arch/arm/boot/dts/omap3-thunder.dts
index 64221e3b3477..f7930f198ce5 100644
--- a/arch/arm/boot/dts/omap3-thunder.dts
+++ b/arch/arm/boot/dts/omap3-thunder.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  * Copyright (C) 2014 Stefan Roese <sr@denx.de>
  */
 
diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts
index d240e39f2151..0482676d1830 100644
--- a/arch/arm/boot/dts/omap3-zoom3.dts
+++ b/arch/arm/boot/dts/omap3-zoom3.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
  */
 /dts-v1/;
 
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 1296d0643943..cf22a7e1c63c 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -1,7 +1,7 @@
 /*
  * Device Tree Source for OMAP3 SoC
  *
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2.  This program is licensed "as is" without any warranty of any
@@ -157,13 +157,56 @@
 			};
 		};
 
-		aes: aes@480c5000 {
-			compatible = "ti,omap3-aes";
-			ti,hwmods = "aes";
-			reg = <0x480c5000 0x50>;
-			interrupts = <0>;
-			dmas = <&sdma 65 &sdma 66>;
-			dma-names = "tx", "rx";
+		aes1_target: target-module@480a6000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x480a6044 0x4>,
+			      <0x480a6048 0x4>,
+			      <0x480a604c 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			clocks = <&aes1_ick>;
+			clock-names = "ick";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x480a6000 0x2000>;
+
+			aes1: aes1@0 {
+				compatible = "ti,omap3-aes";
+				reg = <0 0x50>;
+				interrupts = <0>;
+				dmas = <&sdma 9 &sdma 10>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		aes2_target: target-module@480c5000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x480c5044 0x4>,
+			      <0x480c5048 0x4>,
+			      <0x480c504c 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			clocks = <&aes2_ick>;
+			clock-names = "ick";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x480c5000 0x2000>;
+
+			aes2: aes2@0 {
+				compatible = "ti,omap3-aes";
+				reg = <0 0x50>;
+				interrupts = <0>;
+				dmas = <&sdma 65 &sdma 66>;
+				dma-names = "tx", "rx";
+			};
 		};
 
 		prm: prm@48306000 {
diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts
index 7bfde8aac7ae..c5b903718414 100644
--- a/arch/arm/boot/dts/omap3430-sdp.dts
+++ b/arch/arm/boot/dts/omap3430-sdp.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
  */
 /dts-v1/;
 
diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi
index c4dd9801840d..9c3ee4ac8165 100644
--- a/arch/arm/boot/dts/omap34xx.dtsi
+++ b/arch/arm/boot/dts/omap34xx.dtsi
@@ -1,7 +1,7 @@
 /*
  * Device Tree Source for OMAP34xx/OMAP35xx SoC
  *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2.  This program is licensed "as is" without any warranty of any
diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi
index 71f3c8f1f924..9c3beefc0fe0 100644
--- a/arch/arm/boot/dts/omap36xx.dtsi
+++ b/arch/arm/boot/dts/omap36xx.dtsi
@@ -1,7 +1,7 @@
 /*
  * Device Tree Source for OMAP3 SoC
  *
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2.  This program is licensed "as is" without any warranty of any
diff --git a/arch/arm/boot/dts/omap4-cpu-thermal.dtsi b/arch/arm/boot/dts/omap4-cpu-thermal.dtsi
index ab7f87ae96f0..03d054b2bf9a 100644
--- a/arch/arm/boot/dts/omap4-cpu-thermal.dtsi
+++ b/arch/arm/boot/dts/omap4-cpu-thermal.dtsi
@@ -1,7 +1,7 @@
 /*
  * Device Tree Source for OMAP4/5 SoC CPU thermal
  *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
  * Contact: Eduardo Valentin <eduardo.valentin@ti.com>
  *
  * This file is licensed under the terms of the GNU General Public License
diff --git a/arch/arm/boot/dts/omap4-duovero-parlor.dts b/arch/arm/boot/dts/omap4-duovero-parlor.dts
index 8047e8cdb3af..4548d87534e3 100644
--- a/arch/arm/boot/dts/omap4-duovero-parlor.dts
+++ b/arch/arm/boot/dts/omap4-duovero-parlor.dts
@@ -139,7 +139,7 @@
 	ethernet@gpmc {
 		reg = <5 0 0xff>;
 		interrupt-parent = <&gpio2>;
-		interrupts = <12 IRQ_TYPE_EDGE_FALLING>;	/* gpio_44 */
+		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;		/* gpio_44 */
 
 		phy-mode = "mii";
 
diff --git a/arch/arm/boot/dts/omap4-l4-abe.dtsi b/arch/arm/boot/dts/omap4-l4-abe.dtsi
index a6feb201c569..b2cf5f41e222 100644
--- a/arch/arm/boot/dts/omap4-l4-abe.dtsi
+++ b/arch/arm/boot/dts/omap4-l4-abe.dtsi
@@ -333,8 +333,9 @@
 				compatible = "ti,omap4430-timer";
 				reg = <0x00000000 0x80>,
 				      <0x49038000 0x80>;
-				clocks = <&abe_clkctrl OMAP4_TIMER5_CLKCTRL 24>;
-				clock-names = "fck";
+				clocks = <&abe_clkctrl OMAP4_TIMER5_CLKCTRL 24>,
+					 <&syc_clk_div_ck>;
+				clock-names = "fck", "timer_sys_ck";
 				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 				ti,timer-dsp;
 			};
@@ -363,8 +364,9 @@
 				compatible = "ti,omap4430-timer";
 				reg = <0x00000000 0x80>,
 				      <0x4903a000 0x80>;
-				clocks = <&abe_clkctrl OMAP4_TIMER6_CLKCTRL 24>;
-				clock-names = "fck";
+				clocks = <&abe_clkctrl OMAP4_TIMER6_CLKCTRL 24>,
+					 <&syc_clk_div_ck>;
+				clock-names = "fck", "timer_sys_ck";
 				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 				ti,timer-dsp;
 			};
@@ -393,8 +395,9 @@
 				compatible = "ti,omap4430-timer";
 				reg = <0x00000000 0x80>,
 				      <0x4903c000 0x80>;
-				clocks = <&abe_clkctrl OMAP4_TIMER7_CLKCTRL 24>;
-				clock-names = "fck";
+				clocks = <&abe_clkctrl OMAP4_TIMER7_CLKCTRL 24>,
+					 <&syc_clk_div_ck>;
+				clock-names = "fck", "timer_sys_ck";
 				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 				ti,timer-dsp;
 			};
@@ -423,8 +426,9 @@
 				compatible = "ti,omap4430-timer";
 				reg = <0x00000000 0x80>,
 				      <0x4903e000 0x80>;
-				clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>;
-				clock-names = "fck";
+				clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>,
+					 <&syc_clk_div_ck>;
+				clock-names = "fck", "timer_sys_ck";
 				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
 				ti,timer-pwm;
 				ti,timer-dsp;
diff --git a/arch/arm/boot/dts/omap4-l4.dtsi b/arch/arm/boot/dts/omap4-l4.dtsi
index fcc52121ff09..de742bf84efb 100644
--- a/arch/arm/boot/dts/omap4-l4.dtsi
+++ b/arch/arm/boot/dts/omap4-l4.dtsi
@@ -240,7 +240,6 @@
 
 		target-module@62000 {			/* 0x4a062000, ap 11 16.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "usb_tll_hs";
 			reg = <0x62000 0x4>,
 			      <0x62010 0x4>,
 			      <0x62014 0x4>;
@@ -268,7 +267,6 @@
 
 		target-module@64000 {			/* 0x4a064000, ap 86 1e.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "usb_host_hs";
 			reg = <0x64000 0x4>,
 			      <0x64010 0x4>,
 			      <0x64014 0x4>;
@@ -1163,8 +1161,9 @@
 			timer1: timer@0 {
 				compatible = "ti,omap3430-timer";
 				reg = <0x0 0x80>;
-				clocks = <&l4_wkup_clkctrl OMAP4_TIMER1_CLKCTRL 24>;
-				clock-names = "fck";
+				clocks = <&l4_wkup_clkctrl OMAP4_TIMER1_CLKCTRL 24>,
+					 <&sys_clkin_ck>;
+				clock-names = "fck", "timer_sys_ck";
 				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 				ti,timer-alwon;
 			};
@@ -1439,8 +1438,9 @@
 			timer2: timer@0 {
 				compatible = "ti,omap3430-timer";
 				reg = <0x0 0x80>;
-				clocks = <&l4_per_clkctrl OMAP4_TIMER2_CLKCTRL 24>;
-				clock-names = "fck";
+				clocks = <&l4_per_clkctrl OMAP4_TIMER2_CLKCTRL 24>,
+					 <&sys_clkin_ck>;
+				clock-names = "fck", "timer_sys_ck";
 				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
@@ -1466,8 +1466,9 @@
 			timer3: timer@0 {
 				compatible = "ti,omap4430-timer";
 				reg = <0x0 0x80>;
-				clocks = <&l4_per_clkctrl OMAP4_TIMER3_CLKCTRL 24>;
-				clock-names = "fck";
+				clocks = <&l4_per_clkctrl OMAP4_TIMER3_CLKCTRL 24>,
+					 <&sys_clkin_ck>;
+				clock-names = "fck", "timer_sys_ck";
 				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
@@ -1493,8 +1494,9 @@
 			timer4: timer@0 {
 				compatible = "ti,omap4430-timer";
 				reg = <0x0 0x80>;
-				clocks = <&l4_per_clkctrl OMAP4_TIMER4_CLKCTRL 24>;
-				clock-names = "fck";
+				clocks = <&l4_per_clkctrl OMAP4_TIMER4_CLKCTRL 24>,
+					 <&sys_clkin_ck>;
+				clock-names = "fck", "timer_sys_ck";
 				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
@@ -1520,8 +1522,9 @@
 			timer9: timer@0 {
 				compatible = "ti,omap4430-timer";
 				reg = <0x0 0x80>;
-				clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>;
-				clock-names = "fck";
+				clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>,
+					 <&sys_clkin_ck>;
+				clock-names = "fck", "timer_sys_ck";
 				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 				ti,timer-pwm;
 			};
@@ -1954,8 +1957,9 @@
 			timer10: timer@0 {
 				compatible = "ti,omap3430-timer";
 				reg = <0x0 0x80>;
-				clocks = <&l4_per_clkctrl OMAP4_TIMER10_CLKCTRL 24>;
-				clock-names = "fck";
+				clocks = <&l4_per_clkctrl OMAP4_TIMER10_CLKCTRL 24>,
+					 <&sys_clkin_ck>;
+				clock-names = "fck", "timer_sys_ck";
 				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 				ti,timer-pwm;
 			};
@@ -1982,8 +1986,9 @@
 			timer11: timer@0 {
 				compatible = "ti,omap4430-timer";
 				reg = <0x0 0x80>;
-				clocks = <&l4_per_clkctrl OMAP4_TIMER11_CLKCTRL 24>;
-				clock-names = "fck";
+				clocks = <&l4_per_clkctrl OMAP4_TIMER11_CLKCTRL 24>,
+					 <&sys_clkin_ck>;
+				clock-names = "fck", "timer_sys_ck";
 				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
 				ti,timer-pwm;
 			};
diff --git a/arch/arm/boot/dts/omap4-panda-a4.dts b/arch/arm/boot/dts/omap4-panda-a4.dts
index 64083075dd52..8fd076e5d1b0 100644
--- a/arch/arm/boot/dts/omap4-panda-a4.dts
+++ b/arch/arm/boot/dts/omap4-panda-a4.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  */
 /dts-v1/;
 
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index 55ea8b6189af..3e78caefa2b8 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2011-2013 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2011-2013 Texas Instruments Incorporated - https://www.ti.com/
  */
 #include <dt-bindings/input/input.h>
 #include "elpida_ecb240abacn.dtsi"
@@ -12,6 +12,26 @@
 		reg = <0x80000000 0x40000000>; /* 1 GB */
 	};
 
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		dsp_memory_region: dsp-memory@98000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x98000000 0x800000>;
+			reusable;
+			status = "okay";
+		};
+
+		ipu_memory_region: ipu-memory@98800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x98800000 0x7000000>;
+			reusable;
+			status = "okay";
+		};
+	};
+
 	chosen {
 		stdout-path = &uart3;
 	};
@@ -571,3 +591,17 @@
 		};
 	};
 };
+
+&dsp {
+	status = "okay";
+	memory-region = <&dsp_memory_region>;
+	ti,timers = <&timer5>;
+	ti,watchdog-timers = <&timer6>;
+};
+
+&ipu {
+	status = "okay";
+	memory-region = <&ipu_memory_region>;
+	ti,timers = <&timer3>;
+	ti,watchdog-timers = <&timer9>, <&timer11>;
+};
diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts
index 9dd307b52604..cfa85aa3da08 100644
--- a/arch/arm/boot/dts/omap4-panda-es.dts
+++ b/arch/arm/boot/dts/omap4-panda-es.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  */
 /dts-v1/;
 
diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts
index fb2f47717b45..529d5bcceaaf 100644
--- a/arch/arm/boot/dts/omap4-panda.dts
+++ b/arch/arm/boot/dts/omap4-panda.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
  */
 /dts-v1/;
 
diff --git a/arch/arm/boot/dts/omap4-sdp-es23plus.dts b/arch/arm/boot/dts/omap4-sdp-es23plus.dts
index 42154520d383..869f6279b5be 100644
--- a/arch/arm/boot/dts/omap4-sdp-es23plus.dts
+++ b/arch/arm/boot/dts/omap4-sdp-es23plus.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  */
 #include "omap4-sdp.dts"
 
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 91480ac1f328..79e7a41ecb7e 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
  */
 /dts-v1/;
 
@@ -428,7 +428,7 @@
 
 	/*
 	 * Temperature Sensor
-	 * http://www.ti.com/lit/ds/symlink/tmp105.pdf
+	 * https://www.ti.com/lit/ds/symlink/tmp105.pdf
 	 */
 	tmp105@48 {
 		compatible = "ti,tmp105";
@@ -453,7 +453,7 @@
 
 	/*
 	 * 3-Axis Digital Compass
-	 * http://www.sparkfun.com/datasheets/Sensors/Magneto/HMC5843.pdf
+	 * https://www.sparkfun.com/datasheets/Sensors/Magneto/HMC5843.pdf
 	 */
 	hmc5843@1e {
 		compatible = "honeywell,hmc5843";
diff --git a/arch/arm/boot/dts/omap4-var-som-om44.dtsi b/arch/arm/boot/dts/omap4-var-som-om44.dtsi
index 41de32bcf187..334cbbaa5b8b 100644
--- a/arch/arm/boot/dts/omap4-var-som-om44.dtsi
+++ b/arch/arm/boot/dts/omap4-var-som-om44.dtsi
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright (C) 2014 Joachim Eastwood <manabian@gmail.com>
- * Copyright (C) 2012 Variscite Ltd. - http://www.variscite.com
+ * Copyright (C) 2012 Variscite Ltd. - https://www.variscite.com
  */
 #include "omap4460.dtsi"
 #include "omap4-mcpdm.dtsi"
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 6c2b07f0704d..0282b9de3384 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 #include <dt-bindings/bus/ti-sysc.h>
@@ -26,6 +26,8 @@
 		serial1 = &uart2;
 		serial2 = &uart3;
 		serial3 = &uart4;
+		rproc0 = &dsp;
+		rproc1 = &ipu;
 	};
 
 	cpus {
@@ -71,7 +73,7 @@
 		interrupt-parent = <&gic>;
 	};
 
-	L2: l2-cache-controller@48242000 {
+	L2: cache-controller@48242000 {
 		compatible = "arm,pl310-cache";
 		reg = <0x48242000 0x1000>;
 		cache-unified;
@@ -106,10 +108,6 @@
 			sram = <&ocmcram>;
 		};
 
-		dsp {
-			compatible = "ti,omap3-c64";
-		};
-
 		iva {
 			compatible = "ti,ivahd";
 			ti,hwmods = "iva";
@@ -277,6 +275,29 @@
 			hw-caps-temp-alert;
 		};
 
+		dsp: dsp {
+			compatible = "ti,omap4-dsp";
+			ti,bootreg = <&scm_conf 0x304 0>;
+			iommus = <&mmu_dsp>;
+			resets = <&prm_tesla 0>;
+			clocks = <&tesla_clkctrl OMAP4_DSP_CLKCTRL 0>;
+			firmware-name = "omap4-dsp-fw.xe64T";
+			mboxes = <&mailbox &mbox_dsp>;
+			status = "disabled";
+		};
+
+		ipu: ipu@55020000 {
+			compatible = "ti,omap4-ipu";
+			reg = <0x55020000 0x10000>;
+			reg-names = "l2ram";
+			iommus = <&mmu_ipu>;
+			resets = <&prm_core 0>, <&prm_core 1>;
+			clocks = <&ducati_clkctrl OMAP4_IPU_CLKCTRL 0>;
+			firmware-name = "omap4-ipu-fw.xem3";
+			mboxes = <&mailbox &mbox_ipu>;
+			status = "disabled";
+		};
+
 		aes1_target: target-module@4b501000 {
 			compatible = "ti,sysc-omap2", "ti,sysc";
 			reg = <0x4b501080 0x4>,
@@ -662,6 +683,6 @@
 	ti,no-idle;
 	timer@0 {
 		assigned-clocks = <&l4_wkup_clkctrl OMAP4_TIMER1_CLKCTRL 24>;
-		assigned-clock-parents = <&sys_clkin_ck>;
+		assigned-clock-parents = <&sys_32k_ck>;
 	};
 };
diff --git a/arch/arm/boot/dts/omap443x.dtsi b/arch/arm/boot/dts/omap443x.dtsi
index cbcdcb4e7d1c..8ed510ab00c5 100644
--- a/arch/arm/boot/dts/omap443x.dtsi
+++ b/arch/arm/boot/dts/omap443x.dtsi
@@ -1,7 +1,7 @@
 /*
  * Device Tree Source for OMAP443x SoC
  *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2.  This program is licensed "as is" without any warranty of any
diff --git a/arch/arm/boot/dts/omap4460.dtsi b/arch/arm/boot/dts/omap4460.dtsi
index 2223dc0d63c0..2d3e54901b6e 100644
--- a/arch/arm/boot/dts/omap4460.dtsi
+++ b/arch/arm/boot/dts/omap4460.dtsi
@@ -1,7 +1,7 @@
 /*
  * Device Tree Source for OMAP4460 SoC
  *
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2.  This program is licensed "as is" without any warranty of any
diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi
index 68ac04641bdb..edf1906016c8 100644
--- a/arch/arm/boot/dts/omap5-board-common.dtsi
+++ b/arch/arm/boot/dts/omap5-board-common.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
  */
 #include "omap5.dtsi"
 #include <dt-bindings/interrupt-controller/irq.h>
diff --git a/arch/arm/boot/dts/omap5-core-thermal.dtsi b/arch/arm/boot/dts/omap5-core-thermal.dtsi
index de8a3d456cf7..02e76338bfbc 100644
--- a/arch/arm/boot/dts/omap5-core-thermal.dtsi
+++ b/arch/arm/boot/dts/omap5-core-thermal.dtsi
@@ -1,7 +1,7 @@
 /*
  * Device Tree Source for OMAP543x SoC CORE thermal
  *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
  * Contact: Eduardo Valentin <eduardo.valentin@ti.com>
  *
  * This file is licensed under the terms of the GNU General Public License
diff --git a/arch/arm/boot/dts/omap5-gpu-thermal.dtsi b/arch/arm/boot/dts/omap5-gpu-thermal.dtsi
index bc3090f2e84b..bf8fa9372e57 100644
--- a/arch/arm/boot/dts/omap5-gpu-thermal.dtsi
+++ b/arch/arm/boot/dts/omap5-gpu-thermal.dtsi
@@ -1,7 +1,7 @@
 /*
  * Device Tree Source for OMAP543x SoC GPU thermal
  *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
  * Contact: Eduardo Valentin <eduardo.valentin@ti.com>
  *
  * This file is licensed under the terms of the GNU General Public License
diff --git a/arch/arm/boot/dts/omap5-l4-abe.dtsi b/arch/arm/boot/dts/omap5-l4-abe.dtsi
index bafd6adf9f45..25b7fce8de2d 100644
--- a/arch/arm/boot/dts/omap5-l4-abe.dtsi
+++ b/arch/arm/boot/dts/omap5-l4-abe.dtsi
@@ -298,8 +298,9 @@
 				compatible = "ti,omap5430-timer";
 				reg = <0x0 0x80>,
 				      <0x49038000 0x80>;
-				clocks = <&abe_clkctrl OMAP5_TIMER5_CLKCTRL 24>;
-				clock-names = "fck";
+				clocks = <&abe_clkctrl OMAP5_TIMER5_CLKCTRL 24>,
+					 <&dss_syc_gfclk_div>;
+				clock-names = "fck", "timer_sys_ck";
 				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 				ti,timer-dsp;
 				ti,timer-pwm;
@@ -329,8 +330,9 @@
 				compatible = "ti,omap5430-timer";
 				reg = <0x0 0x80>,
 				      <0x4903a000 0x80>;
-				clocks = <&abe_clkctrl OMAP5_TIMER6_CLKCTRL 24>;
-				clock-names = "fck";
+				clocks = <&abe_clkctrl OMAP5_TIMER6_CLKCTRL 24>,
+					 <&dss_syc_gfclk_div>;
+				clock-names = "fck", "timer_sys_ck";
 				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 				ti,timer-dsp;
 				ti,timer-pwm;
@@ -360,8 +362,9 @@
 				compatible = "ti,omap5430-timer";
 				reg = <0x0 0x80>,
 				      <0x4903c000 0x80>;
-				clocks = <&abe_clkctrl OMAP5_TIMER7_CLKCTRL 24>;
-				clock-names = "fck";
+				clocks = <&abe_clkctrl OMAP5_TIMER7_CLKCTRL 24>,
+					 <&dss_syc_gfclk_div>;
+				clock-names = "fck", "timer_sys_ck";
 				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 				ti,timer-dsp;
 			};
@@ -390,8 +393,9 @@
 				compatible = "ti,omap5430-timer";
 				reg = <0x0 0x80>,
 				      <0x4903e000 0x80>;
-				clocks = <&abe_clkctrl OMAP5_TIMER8_CLKCTRL 24>;
-				clock-names = "fck";
+				clocks = <&abe_clkctrl OMAP5_TIMER8_CLKCTRL 24>,
+					 <&dss_syc_gfclk_div>;
+				clock-names = "fck", "timer_sys_ck";
 				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
 				ti,timer-dsp;
 				ti,timer-pwm;
diff --git a/arch/arm/boot/dts/omap5-l4.dtsi b/arch/arm/boot/dts/omap5-l4.dtsi
index 5217805bf126..f3d3a16b7c64 100644
--- a/arch/arm/boot/dts/omap5-l4.dtsi
+++ b/arch/arm/boot/dts/omap5-l4.dtsi
@@ -167,7 +167,6 @@
 
 		target-module@20000 {			/* 0x4a020000, ap 109 08.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "usb_otg_ss";
 			reg = <0x20000 0x4>,
 			      <0x20010 0x4>;
 			reg-names = "rev", "sysc";
@@ -269,7 +268,6 @@
 
 		target-module@62000 {			/* 0x4a062000, ap 11 0e.0 */
 			compatible = "ti,sysc-omap2", "ti,sysc";
-			ti,hwmods = "usb_tll_hs";
 			reg = <0x62000 0x4>,
 			      <0x62010 0x4>,
 			      <0x62014 0x4>;
@@ -298,7 +296,6 @@
 
 		target-module@64000 {			/* 0x4a064000, ap 71 1e.0 */
 			compatible = "ti,sysc-omap4", "ti,sysc";
-			ti,hwmods = "usb_host_hs";
 			reg = <0x64000 0x4>,
 			      <0x64010 0x4>;
 			reg-names = "rev", "sysc";
@@ -1082,8 +1079,9 @@
 			timer2: timer@0 {
 				compatible = "ti,omap5430-timer";
 				reg = <0x0 0x80>;
-				clocks = <&l4per_clkctrl OMAP5_TIMER2_CLKCTRL 24>;
-				clock-names = "fck";
+				clocks = <&l4per_clkctrl OMAP5_TIMER2_CLKCTRL 24>,
+					 <&sys_clkin>;
+				clock-names = "fck", "timer_sys_ck";
 				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
@@ -1109,8 +1107,9 @@
 			timer3: timer@0 {
 				compatible = "ti,omap5430-timer";
 				reg = <0x0 0x80>;
-				clocks = <&l4per_clkctrl OMAP5_TIMER3_CLKCTRL 24>;
-				clock-names = "fck";
+				clocks = <&l4per_clkctrl OMAP5_TIMER3_CLKCTRL 24>,
+					 <&sys_clkin>;
+				clock-names = "fck", "timer_sys_ck";
 				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
@@ -1136,8 +1135,9 @@
 			timer4: timer@0 {
 				compatible = "ti,omap5430-timer";
 				reg = <0x0 0x80>;
-				clocks = <&l4per_clkctrl OMAP5_TIMER4_CLKCTRL 24>;
-				clock-names = "fck";
+				clocks = <&l4per_clkctrl OMAP5_TIMER4_CLKCTRL 24>,
+					 <&sys_clkin>;
+				clock-names = "fck", "timer_sys_ck";
 				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
@@ -1163,8 +1163,9 @@
 			timer9: timer@0 {
 				compatible = "ti,omap5430-timer";
 				reg = <0x0 0x80>;
-				clocks = <&l4per_clkctrl OMAP5_TIMER9_CLKCTRL 24>;
-				clock-names = "fck";
+				clocks = <&l4per_clkctrl OMAP5_TIMER9_CLKCTRL 24>,
+					 <&sys_clkin>;
+				clock-names = "fck", "timer_sys_ck";
 				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 				ti,timer-pwm;
 			};
@@ -1730,8 +1731,9 @@
 			timer10: timer@0 {
 				compatible = "ti,omap5430-timer";
 				reg = <0x0 0x80>;
-				clocks = <&l4per_clkctrl OMAP5_TIMER10_CLKCTRL 24>;
-				clock-names = "fck";
+				clocks = <&l4per_clkctrl OMAP5_TIMER10_CLKCTRL 24>,
+					 <&sys_clkin>;
+				clock-names = "fck", "timer_sys_ck";
 				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 				ti,timer-pwm;
 			};
@@ -1758,8 +1760,9 @@
 			timer11: timer@0 {
 				compatible = "ti,omap5430-timer";
 				reg = <0x0 0x80>;
-				clocks = <&l4per_clkctrl OMAP5_TIMER11_CLKCTRL 24>;
-				clock-names = "fck";
+				clocks = <&l4per_clkctrl OMAP5_TIMER11_CLKCTRL 24>,
+					 <&sys_clkin>;
+				clock-names = "fck", "timer_sys_ck";
 				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
 				ti,timer-pwm;
 			};
@@ -2387,8 +2390,9 @@
 			timer1: timer@0 {
 				compatible = "ti,omap5430-timer";
 				reg = <0x0 0x80>;
-				clocks = <&wkupaon_clkctrl OMAP5_TIMER1_CLKCTRL 24>;
-				clock-names = "fck";
+				clocks = <&wkupaon_clkctrl OMAP5_TIMER1_CLKCTRL 24>,
+					 <&sys_clkin>;
+				clock-names = "fck", "timer_sys_ck";
 				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 				ti,timer-alwon;
 			};
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 9441e9a572ad..51d5fcae5081 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
  */
 /dts-v1/;
 
@@ -15,6 +15,26 @@
 		reg = <0 0x80000000 0 0x7f000000>; /* 2032 MB */
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		dsp_memory_region: dsp-memory@95000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x95000000 0 0x800000>;
+			reusable;
+			status = "okay";
+		};
+
+		ipu_memory_region: ipu-memory@95800000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x95800000 0 0x3800000>;
+			reusable;
+			status = "okay";
+		};
+	};
+
 	aliases {
 		ethernet = &ethernet;
 	};
@@ -198,3 +218,17 @@
 &wlcore {
 	compatible = "ti,wl1837";
 };
+
+&dsp {
+	status = "okay";
+	memory-region = <&dsp_memory_region>;
+	ti,timers = <&timer5>;
+	ti,watchdog-timers = <&timer6>;
+};
+
+&ipu {
+	status = "okay";
+	memory-region = <&ipu_memory_region>;
+	ti,timers = <&timer3>;
+	ti,watchdog-timers = <&timer9>, <&timer11>;
+};
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index fb889c5b00c9..5da9cff7a53c 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  *
  * Based on "omap4.dtsi"
  */
@@ -31,6 +31,8 @@
 		serial3 = &uart4;
 		serial4 = &uart5;
 		serial5 = &uart6;
+		rproc0 = &dsp;
+		rproc1 = &ipu;
 	};
 
 	cpus {
@@ -216,6 +218,29 @@
 			};
 		};
 
+		dsp: dsp {
+			compatible = "ti,omap5-dsp";
+			ti,bootreg = <&scm_conf 0x304 0>;
+			iommus = <&mmu_dsp>;
+			resets = <&prm_dsp 0>;
+			clocks = <&dsp_clkctrl OMAP5_MMU_DSP_CLKCTRL 0>;
+			firmware-name = "omap5-dsp-fw.xe64T";
+			mboxes = <&mailbox &mbox_dsp>;
+			status = "disabled";
+		};
+
+		ipu: ipu@55020000 {
+			compatible = "ti,omap5-ipu";
+			reg = <0x55020000 0x10000>;
+			reg-names = "l2ram";
+			iommus = <&mmu_ipu>;
+			resets = <&prm_core 0>, <&prm_core 1>;
+			clocks = <&ipu_clkctrl OMAP5_MMU_IPU_CLKCTRL 0>;
+			firmware-name = "omap5-ipu-fw.xem4";
+			mboxes = <&mailbox &mbox_ipu>;
+			status = "disabled";
+		};
+
 		dmm@4e000000 {
 			compatible = "ti,omap5-dmm";
 			reg = <0x4e000000 0x800>;
diff --git a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
new file mode 100644
index 000000000000..282b89ce3d45
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
@@ -0,0 +1,308 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-ipq8064.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "MikroTik RB3011UiAS-RM";
+	compatible = "mikrotik,rb3011";
+
+	aliases {
+		serial0 = &gsbi7_serial;
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac3;
+		mdio-gpio0 = &mdio0;
+		mdio-gpio1 = &mdio1;
+	};
+
+	chosen {
+		bootargs = "loglevel=8 console=ttyMSM0,115200";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		reg = <0x42000000 0x3e000000>;
+		device_type = "memory";
+	};
+
+	mdio0: mdio@0 {
+		status = "okay";
+		compatible = "virtual,mdio-gpio";
+		gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
+			<&qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-0 = <&mdio0_pins>;
+		pinctrl-names = "default";
+
+		switch0: switch@10 {
+			compatible = "qca,qca8337";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			dsa,member = <0 0>;
+
+			pinctrl-0 = <&sw0_reset_pin>;
+			pinctrl-names = "default";
+
+			reset-gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
+			reg = <0x10>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				switch0cpu: port@0 {
+					reg = <0>;
+					label = "cpu";
+					ethernet = <&gmac0>;
+					phy-mode = "rgmii-id";
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "sw1";
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "sw2";
+				};
+
+				port@3 {
+					reg = <3>;
+					label = "sw3";
+				};
+
+				port@4 {
+					reg = <4>;
+					label = "sw4";
+				};
+
+				port@5 {
+					reg = <5>;
+					label = "sw5";
+				};
+			};
+		};
+	};
+
+	mdio1: mdio@1 {
+		status = "okay";
+		compatible = "virtual,mdio-gpio";
+		gpios = <&qcom_pinmux 11 GPIO_ACTIVE_HIGH>,
+			<&qcom_pinmux 10 GPIO_ACTIVE_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-0 = <&mdio1_pins>;
+		pinctrl-names = "default";
+
+		switch1: switch@14 {
+			compatible = "qca,qca8337";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			dsa,member = <1 0>;
+
+			pinctrl-0 = <&sw1_reset_pin>;
+			pinctrl-names = "default";
+
+			reset-gpios = <&qcom_pinmux 17 GPIO_ACTIVE_LOW>;
+			reg = <0x10>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				switch1cpu: port@0 {
+					reg = <0>;
+					label = "cpu";
+					ethernet = <&gmac3>;
+					phy-mode = "sgmii";
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "sw6";
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "sw7";
+				};
+
+				port@3 {
+					reg = <3>;
+					label = "sw8";
+				};
+
+				port@4 {
+					reg = <4>;
+					label = "sw9";
+				};
+
+				port@5 {
+					reg = <5>;
+					label = "sw10";
+				};
+			};
+		};
+	};
+
+	soc {
+		gsbi5: gsbi@1a200000 {
+			qcom,mode = <GSBI_PROT_SPI>;
+			status = "okay";
+
+			spi4: spi@1a280000 {
+				status = "okay";
+				spi-max-frequency = <50000000>;
+
+				pinctrl-0 = <&spi_pins>;
+				pinctrl-names = "default";
+
+				cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
+
+				norflash: s25fl016k@0 {
+					compatible = "jedec,spi-nor";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+
+					partition@0 {
+						label = "RouterBoot";
+						reg = <0x0 0x40000>;
+					};
+				};
+			};
+		};
+
+		gpio_keys {
+			compatible = "gpio-keys";
+			pinctrl-0 = <&buttons_pins>;
+			pinctrl-names = "default";
+
+			button@1 {
+				label = "reset";
+				linux,code = <KEY_RESTART>;
+				gpios = <&qcom_pinmux 66 GPIO_ACTIVE_LOW>;
+				linux,input-type = <1>;
+				debounce-interval = <60>;
+			};
+		};
+
+		leds {
+			compatible = "gpio-leds";
+			pinctrl-0 = <&leds_pins>;
+			pinctrl-names = "default";
+
+			led@7 {
+				label = "rb3011:green:user";
+				gpios = <&qcom_pinmux 33 GPIO_ACTIVE_HIGH>;
+				default-state = "off";
+			};
+		};
+
+	};
+};
+
+&gmac0 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	qcom,id = <0>;
+	phy-handle = <&switch0cpu>;
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&gmac3 {
+	status = "okay";
+
+	phy-mode = "sgmii";
+	qcom,id = <3>;
+	phy-handle = <&switch1cpu>;
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&gsbi7 {
+	status = "okay";
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+};
+
+&gsbi7_serial {
+	status = "okay";
+};
+
+&qcom_pinmux {
+	buttons_pins: buttons_pins {
+		mux {
+			pins = "gpio66";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	leds_pins: leds_pins {
+		mux {
+			pins = "gpio33";
+			drive-strength = <16>;
+			bias-disable;
+		};
+	};
+
+	mdio0_pins: mdio0_pins {
+		mux {
+			pins = "gpio0", "gpio1";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	mdio1_pins: mdio1_pins {
+		mux {
+			pins = "gpio10", "gpio11";
+			function = "gpio";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	sw0_reset_pin: sw0_reset_pin {
+		mux {
+			pins = "gpio16";
+			drive-strength = <16>;
+			function = "gpio";
+			bias-disable;
+			input-disable;
+		};
+	};
+
+	sw1_reset_pin: sw1_reset_pin {
+		mux {
+			pins = "gpio17";
+			drive-strength = <16>;
+			function = "gpio";
+			bias-disable;
+			input-disable;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index b912da9a3ff3..c51481405e7f 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -425,6 +425,13 @@
 			qcom,controller-type = "pmic-arbiter";
 		};
 
+		qfprom: qfprom@700000 {
+			compatible = "qcom,qfprom";
+			reg = <0x00700000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
 		gcc: clock-controller@900000 {
 			compatible = "qcom,gcc-ipq8064";
 			reg = <0x00900000 0x4000>;
@@ -597,6 +604,114 @@
 			perst-gpio = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>;
 		};
 
+		nss_common: syscon@03000000 {
+			compatible = "syscon";
+			reg = <0x03000000 0x0000FFFF>;
+		};
+
+		qsgmii_csr: syscon@1bb00000 {
+			compatible = "syscon";
+			reg = <0x1bb00000 0x000001FF>;
+		};
+
+		stmmac_axi_setup: stmmac-axi-config {
+			snps,wr_osr_lmt = <7>;
+			snps,rd_osr_lmt = <7>;
+			snps,blen = <16 0 0 0 0 0 0>;
+		};
+
+		gmac0: ethernet@37000000 {
+			device_type = "network";
+			compatible = "qcom,ipq806x-gmac";
+			reg = <0x37000000 0x200000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+
+			snps,axi-config = <&stmmac_axi_setup>;
+			snps,pbl = <32>;
+			snps,aal = <1>;
+
+			qcom,nss-common = <&nss_common>;
+			qcom,qsgmii-csr = <&qsgmii_csr>;
+
+			clocks = <&gcc GMAC_CORE1_CLK>;
+			clock-names = "stmmaceth";
+
+			resets = <&gcc GMAC_CORE1_RESET>;
+			reset-names = "stmmaceth";
+
+			status = "disabled";
+		};
+
+		gmac1: ethernet@37200000 {
+			device_type = "network";
+			compatible = "qcom,ipq806x-gmac";
+			reg = <0x37200000 0x200000>;
+			interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+
+			snps,axi-config = <&stmmac_axi_setup>;
+			snps,pbl = <32>;
+			snps,aal = <1>;
+
+			qcom,nss-common = <&nss_common>;
+			qcom,qsgmii-csr = <&qsgmii_csr>;
+
+			clocks = <&gcc GMAC_CORE2_CLK>;
+			clock-names = "stmmaceth";
+
+			resets = <&gcc GMAC_CORE2_RESET>;
+			reset-names = "stmmaceth";
+
+			status = "disabled";
+		};
+
+		gmac2: ethernet@37400000 {
+			device_type = "network";
+			compatible = "qcom,ipq806x-gmac";
+			reg = <0x37400000 0x200000>;
+			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+
+			snps,axi-config = <&stmmac_axi_setup>;
+			snps,pbl = <32>;
+			snps,aal = <1>;
+
+			qcom,nss-common = <&nss_common>;
+			qcom,qsgmii-csr = <&qsgmii_csr>;
+
+			clocks = <&gcc GMAC_CORE3_CLK>;
+			clock-names = "stmmaceth";
+
+			resets = <&gcc GMAC_CORE3_RESET>;
+			reset-names = "stmmaceth";
+
+			status = "disabled";
+		};
+
+		gmac3: ethernet@37600000 {
+			device_type = "network";
+			compatible = "qcom,ipq806x-gmac";
+			reg = <0x37600000 0x200000>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+
+			snps,axi-config = <&stmmac_axi_setup>;
+			snps,pbl = <32>;
+			snps,aal = <1>;
+
+			qcom,nss-common = <&nss_common>;
+			qcom,qsgmii-csr = <&qsgmii_csr>;
+
+			clocks = <&gcc GMAC_CORE4_CLK>;
+			clock-names = "stmmaceth";
+
+			resets = <&gcc GMAC_CORE4_RESET>;
+			reset-names = "stmmaceth";
+
+			status = "disabled";
+		};
+
 		vsdcc_fixed: vsdcc-regulator {
 			compatible = "regulator-fixed";
 			regulator-name = "SDCC Power";
diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index 0a567d8ebc66..b9b138888048 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -323,7 +323,7 @@
 			status = "disabled";
 		};
 
-		sdhi0: sd@e804e000 {
+		sdhi0: mmc@e804e000 {
 			compatible = "renesas,sdhi-r7s72100";
 			reg = <0xe804e000 0x100>;
 			interrupts = <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
@@ -339,7 +339,7 @@
 			status = "disabled";
 		};
 
-		sdhi1: sd@e804e800 {
+		sdhi1: mmc@e804e800 {
 			compatible = "renesas,sdhi-r7s72100";
 			reg = <0xe804e800 0x100>;
 			interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm/boot/dts/r7s9210.dtsi b/arch/arm/boot/dts/r7s9210.dtsi
index cace43807497..838920aef992 100644
--- a/arch/arm/boot/dts/r7s9210.dtsi
+++ b/arch/arm/boot/dts/r7s9210.dtsi
@@ -416,7 +416,7 @@
 			status = "disabled";
 		};
 
-		sdhi0: sd@e8228000 {
+		sdhi0: mmc@e8228000 {
 			compatible = "renesas,sdhi-r7s9210";
 			reg = <0xe8228000 0x8c0>;
 			interrupts = <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>;
@@ -428,7 +428,7 @@
 			status = "disabled";
 		};
 
-		sdhi1: sd@e822a000 {
+		sdhi1: mmc@e822a000 {
 			compatible = "renesas,sdhi-r7s9210";
 			reg = <0xe822a000 0x8c0>;
 			interrupts = <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
index a3ba722a9d7f..b92e72579836 100644
--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -409,7 +409,7 @@
 		status = "disabled";
 	};
 
-	sdhi0: sd@ee100000 {
+	sdhi0: mmc@ee100000 {
 		compatible = "renesas,sdhi-r8a73a4";
 		reg = <0 0xee100000 0 0x100>;
 		interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
@@ -419,7 +419,7 @@
 		status = "disabled";
 	};
 
-	sdhi1: sd@ee120000 {
+	sdhi1: mmc@ee120000 {
 		compatible = "renesas,sdhi-r8a73a4";
 		reg = <0 0xee120000 0 0x100>;
 		interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
@@ -429,7 +429,7 @@
 		status = "disabled";
 	};
 
-	sdhi2: sd@ee140000 {
+	sdhi2: mmc@ee140000 {
 		compatible = "renesas,sdhi-r8a73a4";
 		reg = <0 0xee140000 0 0x100>;
 		interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi
index 0588d4446f9a..8048303037ee 100644
--- a/arch/arm/boot/dts/r8a7740.dtsi
+++ b/arch/arm/boot/dts/r8a7740.dtsi
@@ -349,7 +349,7 @@
 		status = "disabled";
 	};
 
-	sdhi0: sd@e6850000 {
+	sdhi0: mmc@e6850000 {
 		compatible = "renesas,sdhi-r8a7740";
 		reg = <0xe6850000 0x100>;
 		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
@@ -362,7 +362,7 @@
 		status = "disabled";
 	};
 
-	sdhi1: sd@e6860000 {
+	sdhi1: mmc@e6860000 {
 		compatible = "renesas,sdhi-r8a7740";
 		reg = <0xe6860000 0x100>;
 		interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
@@ -375,7 +375,7 @@
 		status = "disabled";
 	};
 
-	sdhi2: sd@e6870000 {
+	sdhi2: mmc@e6870000 {
 		compatible = "renesas,sdhi-r8a7740";
 		reg = <0xe6870000 0x100>;
 		interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
new file mode 100644
index 000000000000..1479ced50873
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the iWave-RZ/G1H Qseven board development
+ * platform with camera daughter board
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a7742-iwg21d-q7.dts"
+
+/ {
+	model = "iWave Systems RZ/G1H Qseven development platform with camera add-on";
+	compatible = "iwave,g21d", "iwave,g21m", "renesas,r8a7742";
+
+	aliases {
+		serial0 = &scif0;
+		serial1 = &scif1;
+		serial3 = &scifb1;
+		serial5 = &hscif0;
+		ethernet1 = &ether;
+	};
+};
+
+&avb {
+	/* Pins shared with VIN0, keep status disabled */
+	status = "disabled";
+};
+
+&ether {
+	pinctrl-0 = <&ether_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&phy1>;
+	renesas,ether-link-active-low;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+		micrel,led-mode = <1>;
+	};
+};
+
+&hscif0 {
+	pinctrl-0 = <&hscif0_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&pfc {
+	ether_pins: ether {
+		groups = "eth_mdio", "eth_rmii";
+		function = "eth";
+	};
+
+	hscif0_pins: hscif0 {
+		groups = "hscif0_data", "hscif0_ctrl";
+		function = "hscif0";
+	};
+
+	scif0_pins: scif0 {
+		groups = "scif0_data";
+		function = "scif0";
+	};
+
+	scif1_pins: scif1 {
+		groups = "scif1_data";
+		function = "scif1";
+	};
+
+	scifb1_pins: scifb1 {
+		groups = "scifb1_data";
+		function = "scifb1";
+	};
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&scif1 {
+	pinctrl-0 = <&scif1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&scifb1 {
+	pinctrl-0 = <&scifb1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	rts-gpios = <&gpio4 21 GPIO_ACTIVE_LOW>;
+	cts-gpios = <&gpio4 17 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
index 1f5c35c66d91..e90aaf1c94f0 100644
--- a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
@@ -5,6 +5,29 @@
  * Copyright (C) 2020 Renesas Electronics Corp.
  */
 
+/*
+ * SSI-SGTL5000
+ *
+ * This command is required when Playback/Capture
+ *
+ *      amixer set "DVC Out" 100%
+ *      amixer set "DVC In" 100%
+ *
+ * You can use Mute
+ *
+ *      amixer set "DVC Out Mute" on
+ *      amixer set "DVC In Mute" on
+ *
+ * You can use Volume Ramp
+ *
+ *      amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
+ *      amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
+ *      amixer set "DVC Out Ramp" on
+ *      aplay xxx.wav &
+ *      amixer set "DVC Out"  80%  // Volume Down
+ *      amixer set "DVC Out" 100%  // Volume Up
+ */
+
 /dts-v1/;
 #include "r8a7742-iwg21m.dtsi"
 
@@ -14,19 +37,158 @@
 
 	aliases {
 		serial2 = &scifa2;
+		serial4 = &scifb2;
+		ethernet0 = &avb;
 	};
 
 	chosen {
 		bootargs = "ignore_loglevel root=/dev/mmcblk0p1 rw rootwait";
 		stdout-path = "serial2:115200n8";
 	};
+
+	audio_clock: audio_clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+
+	reg_1p5v: 1p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P5V";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+	};
+
+	rsnd_sgtl5000: sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sndcodec>;
+		simple-audio-card,frame-master = <&sndcodec>;
+
+		sndcpu: simple-audio-card,cpu {
+			sound-dai = <&rcar_sound>;
+		};
+
+		sndcodec: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
+	};
+
+	vcc_sdhi2: regulator-vcc-sdhi2 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDHI2 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	};
+
+	vccq_sdhi2: regulator-vccq-sdhi2 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI2 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+};
+
+&avb {
+	pinctrl-0 = <&avb_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&phy3>;
+	phy-mode = "gmii";
+	renesas,no-ether-link;
+	status = "okay";
+
+	phy3: ethernet-phy@3 {
+		reg = <3>;
+		micrel,led-mode = <1>;
+	};
+};
+
+&i2c2 {
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		#sound-dai-cells = <0>;
+		reg = <0x0a>;
+		clocks = <&audio_clock>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+		VDDD-supply = <&reg_1p5v>;
+	};
 };
 
 &pfc {
+	avb_pins: avb {
+		groups = "avb_mdio", "avb_gmii";
+		function = "avb";
+	};
+
+	i2c2_pins: i2c2 {
+		groups = "i2c2_b";
+		function = "i2c2";
+	};
+
 	scifa2_pins: scifa2 {
 		groups = "scifa2_data_c";
 		function = "scifa2";
 	};
+
+	scifb2_pins: scifb2 {
+		groups = "scifb2_data", "scifb2_ctrl";
+		function = "scifb2";
+	};
+
+	sdhi2_pins: sd2 {
+		groups = "sdhi2_data4", "sdhi2_ctrl";
+		function = "sdhi2";
+		power-source = <3300>;
+	};
+
+	sdhi2_pins_uhs: sd2_uhs {
+		groups = "sdhi2_data4", "sdhi2_ctrl";
+		function = "sdhi2";
+		power-source = <1800>;
+	};
+
+	sound_pins: sound {
+		groups = "ssi34_ctrl", "ssi3_data", "ssi4_data";
+		function = "ssi";
+	};
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	rcar_sound,dai {
+		dai0 {
+			playback = <&ssi4 &src4 &dvc1>;
+			capture = <&ssi3 &src3 &dvc0>;
+		};
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
 };
 
 &scifa2 {
@@ -35,3 +197,28 @@
 
 	status = "okay";
 };
+
+&scifb2 {
+	pinctrl-0 = <&scifb2_pins>;
+	pinctrl-names = "default";
+
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&sdhi2 {
+	pinctrl-0 = <&sdhi2_pins>;
+	pinctrl-1 = <&sdhi2_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&vcc_sdhi2>;
+	vqmmc-supply = <&vccq_sdhi2>;
+	cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+	sd-uhs-sdr50;
+	status = "okay";
+};
+
+&ssi4 {
+	shared-pin;
+};
diff --git a/arch/arm/boot/dts/r8a7742.dtsi b/arch/arm/boot/dts/r8a7742.dtsi
index 305d8086a3dd..9743b4242801 100644
--- a/arch/arm/boot/dts/r8a7742.dtsi
+++ b/arch/arm/boot/dts/r8a7742.dtsi
@@ -15,9 +15,31 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	/*
+	 * The external audio clocks are configured as 0 Hz fixed frequency
+	 * clocks by default.
+	 * Boards that provide audio clocks should override them.
+	 */
+	audio_clk_a: audio_clk_a {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+	audio_clk_b: audio_clk_b {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+	audio_clk_c: audio_clk_c {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
+		enable-method = "renesas,apmu";
 
 		cpu0: cpu@0 {
 			device_type = "cpu";
@@ -200,6 +222,17 @@
 		#size-cells = <2>;
 		ranges;
 
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a7742-wdt",
+				     "renesas,rcar-gen2-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
 		gpio0: gpio@e6050000 {
 			compatible = "renesas,gpio-r8a7742",
 				     "renesas,rcar-gen2-gpio";
@@ -305,6 +338,18 @@
 			#reset-cells = <1>;
 		};
 
+		apmu@e6151000 {
+			compatible = "renesas,r8a7742-apmu", "renesas,apmu";
+			reg = <0 0xe6151000 0 0x188>;
+			cpus = <&cpu4 &cpu5 &cpu6 &cpu7>;
+		};
+
+		apmu@e6152000 {
+			compatible = "renesas,r8a7742-apmu", "renesas,apmu";
+			reg = <0 0xe6152000 0 0x188>;
+			cpus = <&cpu0 &cpu1 &cpu2 &cpu3>;
+		};
+
 		rst: reset-controller@e6160000 {
 			compatible = "renesas,r8a7742-rst";
 			reg = <0 0xe6160000 0 0x0100>;
@@ -330,6 +375,17 @@
 			resets = <&cpg 407>;
 		};
 
+		thermal: thermal@e61f0000 {
+			compatible = "renesas,thermal-r8a7742",
+				     "renesas,rcar-gen2-thermal";
+			reg = <0 0xe61f0000 0 0x10>, <0 0xe61f0100 0 0x38>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			#thermal-sensor-cells = <0>;
+		};
+
 		icram0: sram@e63a0000 {
 			compatible = "mmio-sram";
 			reg = <0 0xe63a0000 0 0x12000>;
@@ -359,6 +415,195 @@
 			ranges = <0 0 0xe6300000 0x40000>;
 		};
 
+		i2c0: i2c@e6508000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7742",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6518000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7742",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6518000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6530000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7742",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6530000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e6540000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a7742",
+				     "renesas,rcar-gen2-i2c";
+			reg = <0 0xe6540000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		iic0: i2c@e6500000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a7742",
+				     "renesas,rcar-gen2-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe6500000 0 0x425>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 318>;
+			dmas = <&dmac0 0x61>, <&dmac0 0x62>,
+			       <&dmac1 0x61>, <&dmac1 0x62>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 318>;
+			status = "disabled";
+		};
+
+		iic1: i2c@e6510000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a7742",
+				     "renesas,rcar-gen2-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe6510000 0 0x425>;
+			interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 323>;
+			dmas = <&dmac0 0x65>, <&dmac0 0x66>,
+			       <&dmac1 0x65>, <&dmac1 0x66>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 323>;
+			status = "disabled";
+		};
+
+		iic2: i2c@e6520000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a7742",
+				     "renesas,rcar-gen2-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe6520000 0 0x425>;
+			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 300>;
+			dmas = <&dmac0 0x69>, <&dmac0 0x6a>,
+			       <&dmac1 0x69>, <&dmac1 0x6a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 300>;
+			status = "disabled";
+		};
+
+		iic3: i2c@e60b0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a7742";
+			reg = <0 0xe60b0000 0 0x425>;
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 926>;
+			dmas = <&dmac0 0x77>, <&dmac0 0x78>,
+			       <&dmac1 0x77>, <&dmac1 0x78>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 926>;
+			status = "disabled";
+		};
+
+		hsusb: usb@e6590000 {
+			compatible = "renesas,usbhs-r8a7742",
+				     "renesas,rcar-gen2-usbhs";
+			reg = <0 0xe6590000 0 0x100>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 704>;
+			dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+			       <&usb_dmac1 0>, <&usb_dmac1 1>;
+			dma-names = "ch0", "ch1", "ch2", "ch3";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 704>;
+			renesas,buswait = <4>;
+			phys = <&usb0 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		usbphy: usb-phy@e6590100 {
+			compatible = "renesas,usb-phy-r8a7742",
+				     "renesas,rcar-gen2-usb-phy";
+			reg = <0 0xe6590100 0 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cpg CPG_MOD 704>;
+			clock-names = "usbhs";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 704>;
+			status = "disabled";
+
+			usb0: usb-channel@0 {
+				reg = <0>;
+				#phy-cells = <1>;
+			};
+			usb2: usb-channel@2 {
+				reg = <2>;
+				#phy-cells = <1>;
+			};
+		};
+
+		usb_dmac0: dma-controller@e65a0000 {
+			compatible = "renesas,r8a7742-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65a0000 0 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 330>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 330>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
+		usb_dmac1: dma-controller@e65b0000 {
+			compatible = "renesas,r8a7742-usb-dmac",
+				     "renesas,usb-dmac";
+			reg = <0 0xe65b0000 0 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1";
+			clocks = <&cpg CPG_MOD 331>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 331>;
+			#dma-cells = <1>;
+			dma-channels = <2>;
+		};
+
 		dmac0: dma-controller@e6700000 {
 			compatible = "renesas,dmac-r8a7742",
 				     "renesas,rcar-dmac";
@@ -425,6 +670,19 @@
 			dma-channels = <15>;
 		};
 
+		avb: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a7742",
+				     "renesas,etheravb-rcar-gen2";
+			reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
+			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 812>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		scifa0: serial@e6c40000 {
 			compatible = "renesas,scifa-r8a7742",
 				     "renesas,rcar-gen2-scifa", "renesas,scifa";
@@ -595,6 +853,515 @@
 			status = "disabled";
 		};
 
+		msiof0: spi@e6e20000 {
+			compatible = "renesas,msiof-r8a7742",
+				     "renesas,rcar-gen2-msiof";
+			reg = <0 0xe6e20000 0 0x0064>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 0>;
+			dmas = <&dmac0 0x51>, <&dmac0 0x52>,
+			       <&dmac1 0x51>, <&dmac1 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6e10000 {
+			compatible = "renesas,msiof-r8a7742",
+				     "renesas,rcar-gen2-msiof";
+			reg = <0 0xe6e10000 0 0x0064>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 208>;
+			dmas = <&dmac0 0x55>, <&dmac0 0x56>,
+			       <&dmac1 0x55>, <&dmac1 0x56>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 208>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6e00000 {
+			compatible = "renesas,msiof-r8a7742",
+				     "renesas,rcar-gen2-msiof";
+			reg = <0 0xe6e00000 0 0x0064>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 205>;
+			dmas = <&dmac0 0x41>, <&dmac0 0x42>,
+			       <&dmac1 0x41>, <&dmac1 0x42>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 205>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof3: spi@e6c90000 {
+			compatible = "renesas,msiof-r8a7742",
+				     "renesas,rcar-gen2-msiof";
+			reg = <0 0xe6c90000 0 0x0064>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 215>;
+			dmas = <&dmac0 0x45>, <&dmac0 0x46>,
+			       <&dmac1 0x45>, <&dmac1 0x46>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 215>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		rcar_sound: sound@ec500000 {
+			/*
+			 * #sound-dai-cells is required
+			 *
+			 * Single DAI : #sound-dai-cells = <0>;         <&rcar_sound>;
+			 * Multi  DAI : #sound-dai-cells = <1>;         <&rcar_sound N>;
+			 */
+			compatible = "renesas,rcar_sound-r8a7742",
+				     "renesas,rcar_sound-gen2";
+			reg = <0 0xec500000 0 0x1000>, /* SCU */
+			      <0 0xec5a0000 0 0x100>,  /* ADG */
+			      <0 0xec540000 0 0x1000>, /* SSIU */
+			      <0 0xec541000 0 0x280>,  /* SSI */
+			      <0 0xec740000 0 0x200>;  /* Audio DMAC peri peri*/
+			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+			clocks = <&cpg CPG_MOD 1005>,
+				 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+				 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+				 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+				 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+				 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+				 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+				 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+				 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+				 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+				 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+				 <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>,
+				 <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>,
+				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+				 <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>,
+				 <&cpg CPG_CORE R8A7742_CLK_M2>;
+			clock-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0",
+				      "src.9", "src.8", "src.7", "src.6",
+				      "src.5", "src.4", "src.3", "src.2",
+				      "src.1", "src.0",
+				      "ctu.0", "ctu.1",
+				      "mix.0", "mix.1",
+				      "dvc.0", "dvc.1",
+				      "clk_a", "clk_b", "clk_c", "clk_i";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 1005>,
+				 <&cpg 1006>, <&cpg 1007>,
+				 <&cpg 1008>, <&cpg 1009>,
+				 <&cpg 1010>, <&cpg 1011>,
+				 <&cpg 1012>, <&cpg 1013>,
+				 <&cpg 1014>, <&cpg 1015>;
+			reset-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0";
+
+			status = "disabled";
+
+			rcar_sound,dvc {
+				dvc0: dvc-0 {
+					dmas = <&audma1 0xbc>;
+					dma-names = "tx";
+				};
+				dvc1: dvc-1 {
+					dmas = <&audma1 0xbe>;
+					dma-names = "tx";
+				};
+			};
+
+			rcar_sound,mix {
+				mix0: mix-0 { };
+				mix1: mix-1 { };
+			};
+
+			rcar_sound,ctu {
+				ctu00: ctu-0 { };
+				ctu01: ctu-1 { };
+				ctu02: ctu-2 { };
+				ctu03: ctu-3 { };
+				ctu10: ctu-4 { };
+				ctu11: ctu-5 { };
+				ctu12: ctu-6 { };
+				ctu13: ctu-7 { };
+			};
+
+			rcar_sound,src {
+				src0: src-0 {
+					interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x85>, <&audma1 0x9a>;
+					dma-names = "rx", "tx";
+				};
+				src1: src-1 {
+					interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x87>, <&audma1 0x9c>;
+					dma-names = "rx", "tx";
+				};
+				src2: src-2 {
+					interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x89>, <&audma1 0x9e>;
+					dma-names = "rx", "tx";
+				};
+				src3: src-3 {
+					interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8b>, <&audma1 0xa0>;
+					dma-names = "rx", "tx";
+				};
+				src4: src-4 {
+					interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8d>, <&audma1 0xb0>;
+					dma-names = "rx", "tx";
+				};
+				src5: src-5 {
+					interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8f>, <&audma1 0xb2>;
+					dma-names = "rx", "tx";
+				};
+				src6: src-6 {
+					interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x91>, <&audma1 0xb4>;
+					dma-names = "rx", "tx";
+				};
+				src7: src-7 {
+					interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x93>, <&audma1 0xb6>;
+					dma-names = "rx", "tx";
+				};
+				src8: src-8 {
+					interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x95>, <&audma1 0xb8>;
+					dma-names = "rx", "tx";
+				};
+				src9: src-9 {
+					interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x97>, <&audma1 0xba>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssi {
+				ssi0: ssi-0 {
+					interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x01>, <&audma1 0x02>,
+					       <&audma0 0x15>, <&audma1 0x16>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi1: ssi-1 {
+					 interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x03>, <&audma1 0x04>,
+					       <&audma0 0x49>, <&audma1 0x4a>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi2: ssi-2 {
+					interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x05>, <&audma1 0x06>,
+					       <&audma0 0x63>, <&audma1 0x64>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi3: ssi-3 {
+					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x07>, <&audma1 0x08>,
+					       <&audma0 0x6f>, <&audma1 0x70>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi4: ssi-4 {
+					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x09>, <&audma1 0x0a>,
+					       <&audma0 0x71>, <&audma1 0x72>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi5: ssi-5 {
+					interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0b>, <&audma1 0x0c>,
+					       <&audma0 0x73>, <&audma1 0x74>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi6: ssi-6 {
+					interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0d>, <&audma1 0x0e>,
+					       <&audma0 0x75>, <&audma1 0x76>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi7: ssi-7 {
+					interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0f>, <&audma1 0x10>,
+					       <&audma0 0x79>, <&audma1 0x7a>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi8: ssi-8 {
+					interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x11>, <&audma1 0x12>,
+					       <&audma0 0x7b>, <&audma1 0x7c>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi9: ssi-9 {
+					interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x13>, <&audma1 0x14>,
+					       <&audma0 0x7d>, <&audma1 0x7e>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+			};
+		};
+
+		audma0: dma-controller@ec700000 {
+			compatible = "renesas,dmac-r8a7742",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec700000 0 0x10000>;
+			interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12";
+			clocks = <&cpg CPG_MOD 502>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 502>;
+			#dma-cells = <1>;
+			dma-channels = <13>;
+		};
+
+		audma1: dma-controller@ec720000 {
+			compatible = "renesas,dmac-r8a7742",
+				     "renesas,rcar-dmac";
+			reg = <0 0xec720000 0 0x10000>;
+			interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12";
+			clocks = <&cpg CPG_MOD 501>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 501>;
+			#dma-cells = <1>;
+			dma-channels = <13>;
+		};
+
+		xhci: usb@ee000000 {
+			compatible = "renesas,xhci-r8a7742",
+				     "renesas,rcar-gen2-xhci";
+			reg = <0 0xee000000 0 0xc00>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 328>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 328>;
+			phys = <&usb2 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		pci0: pci@ee090000 {
+			compatible = "renesas,pci-r8a7742",
+				     "renesas,pci-rcar-gen2";
+			device_type = "pci";
+			reg = <0 0xee090000 0 0xc00>,
+			      <0 0xee080000 0 0x1100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 703>;
+			status = "disabled";
+
+			bus-range = <0 0>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
+			interrupt-map-mask = <0xf800 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+					<0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+
+			usb@1,0 {
+				reg = <0x800 0 0 0 0>;
+				phys = <&usb0 0>;
+				phy-names = "usb";
+			};
+
+			usb@2,0 {
+				reg = <0x1000 0 0 0 0>;
+				phys = <&usb0 0>;
+				phy-names = "usb";
+			};
+		};
+
+		pci1: pci@ee0b0000 {
+			compatible = "renesas,pci-r8a7742",
+				     "renesas,pci-rcar-gen2";
+			device_type = "pci";
+			reg = <0 0xee0b0000 0 0xc00>,
+			      <0 0xee0a0000 0 0x1100>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 703>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 703>;
+			status = "disabled";
+
+			bus-range = <1 1>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			ranges = <0x02000000 0 0xee0a0000 0 0xee0a0000 0 0x00010000>;
+			interrupt-map-mask = <0xf800 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0800 0 0 1 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+					<0x1000 0 0 2 &gic GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pci2: pci@ee0d0000 {
+			compatible = "renesas,pci-r8a7742",
+				     "renesas,pci-rcar-gen2";
+			device_type = "pci";
+			clocks = <&cpg CPG_MOD 703>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 703>;
+			reg = <0 0xee0d0000 0 0xc00>,
+			      <0 0xee0c0000 0 0x1100>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+
+			bus-range = <2 2>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
+			interrupt-map-mask = <0xf800 0 0 0x7>;
+			interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					<0x0800 0 0 1 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+					<0x1000 0 0 2 &gic GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+
+			usb@1,0 {
+				reg = <0x20800 0 0 0 0>;
+				phys = <&usb2 0>;
+				phy-names = "usb";
+			};
+
+			usb@2,0 {
+				reg = <0x21000 0 0 0 0>;
+				phys = <&usb2 0>;
+				phy-names = "usb";
+			};
+		};
+
+		sdhi0: mmc@ee100000 {
+			compatible = "renesas,sdhi-r8a7742",
+				     "renesas,rcar-gen2-sdhi";
+			reg = <0 0xee100000 0 0x328>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 314>;
+			dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
+			       <&dmac1 0xcd>, <&dmac1 0xce>;
+			dma-names = "tx", "rx", "tx", "rx";
+			max-frequency = <195000000>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 314>;
+			status = "disabled";
+		};
+
+		sdhi1: mmc@ee120000 {
+			compatible = "renesas,sdhi-r8a7742",
+				     "renesas,rcar-gen2-sdhi";
+			reg = <0 0xee120000 0 0x328>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 313>;
+			dmas = <&dmac0 0xc9>, <&dmac0 0xca>,
+			       <&dmac1 0xc9>, <&dmac1 0xca>;
+			dma-names = "tx", "rx", "tx", "rx";
+			max-frequency = <195000000>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 313>;
+			status = "disabled";
+		};
+
+		sdhi2: mmc@ee140000 {
+			compatible = "renesas,sdhi-r8a7742",
+				     "renesas,rcar-gen2-sdhi";
+			reg = <0 0xee140000 0 0x100>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 312>;
+			dmas = <&dmac0 0xc1>, <&dmac0 0xc2>,
+			       <&dmac1 0xc1>, <&dmac1 0xc2>;
+			dma-names = "tx", "rx", "tx", "rx";
+			max-frequency = <97500000>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 312>;
+			status = "disabled";
+		};
+
+		sdhi3: mmc@ee160000 {
+			compatible = "renesas,sdhi-r8a7742",
+				     "renesas,rcar-gen2-sdhi";
+			reg = <0 0xee160000 0 0x100>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 311>;
+			dmas = <&dmac0 0xd3>, <&dmac0 0xd4>,
+			       <&dmac1 0xd3>, <&dmac1 0xd4>;
+			dma-names = "tx", "rx", "tx", "rx";
+			max-frequency = <97500000>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 311>;
+			status = "disabled";
+		};
+
+		mmcif0: mmc@ee200000 {
+			compatible = "renesas,mmcif-r8a7742",
+				     "renesas,sh-mmcif";
+			reg = <0 0xee200000 0 0x80>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 315>;
+			dmas = <&dmac0 0xd1>, <&dmac0 0xd2>,
+			       <&dmac1 0xd1>, <&dmac1 0xd2>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 315>;
+			reg-io-width = <4>;
+			status = "disabled";
+			max-frequency = <97500000>;
+		};
+
 		mmcif1: mmc@ee220000 {
 			compatible = "renesas,mmcif-r8a7742",
 				     "renesas,sh-mmcif";
@@ -611,6 +1378,42 @@
 			max-frequency = <97500000>;
 		};
 
+		sata0: sata@ee300000 {
+			compatible = "renesas,sata-r8a7742",
+				     "renesas,rcar-gen2-sata";
+			reg = <0 0xee300000 0 0x200000>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 815>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 815>;
+			status = "disabled";
+		};
+
+		sata1: sata@ee500000 {
+			compatible = "renesas,sata-r8a7742",
+				     "renesas,rcar-gen2-sata";
+			reg = <0 0xee500000 0 0x200000>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 814>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 814>;
+			status = "disabled";
+		};
+
+		ether: ethernet@ee700000 {
+			compatible = "renesas,ether-r8a7742",
+				     "renesas,rcar-gen2-ether";
+			reg = <0 0xee700000 0 0x400>;
+			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 813>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 813>;
+			phy-mode = "rmii";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		gic: interrupt-controller@f1001000 {
 			compatible = "arm,gic-400";
 			#interrupt-cells = <3>;
@@ -629,6 +1432,57 @@
 			compatible = "renesas,prr";
 			reg = <0 0xff000044 0 4>;
 		};
+
+		cmt0: timer@ffca0000 {
+			compatible = "renesas,r8a7742-cmt0",
+				     "renesas,rcar-gen2-cmt0";
+			reg = <0 0xffca0000 0 0x1004>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 124>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 124>;
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a7742-cmt1",
+				     "renesas,rcar-gen2-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 329>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 329>;
+			status = "disabled";
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&thermal>;
+
+			trips {
+				cpu-crit {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+			};
+		};
 	};
 
 	timer {
diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
index fff123753b85..896916a00b84 100644
--- a/arch/arm/boot/dts/r8a7743.dtsi
+++ b/arch/arm/boot/dts/r8a7743.dtsi
@@ -1520,7 +1520,7 @@
 			};
 		};
 
-		sdhi0: sd@ee100000 {
+		sdhi0: mmc@ee100000 {
 			compatible = "renesas,sdhi-r8a7743",
 				     "renesas,rcar-gen2-sdhi";
 			reg = <0 0xee100000 0 0x328>;
@@ -1535,7 +1535,7 @@
 			status = "disabled";
 		};
 
-		sdhi1: sd@ee140000 {
+		sdhi1: mmc@ee140000 {
 			compatible = "renesas,sdhi-r8a7743",
 				     "renesas,rcar-gen2-sdhi";
 			reg = <0 0xee140000 0 0x100>;
@@ -1550,7 +1550,7 @@
 			status = "disabled";
 		};
 
-		sdhi2: sd@ee160000 {
+		sdhi2: mmc@ee160000 {
 			compatible = "renesas,sdhi-r8a7743",
 				     "renesas,rcar-gen2-sdhi";
 			reg = <0 0xee160000 0 0x100>;
diff --git a/arch/arm/boot/dts/r8a7744.dtsi b/arch/arm/boot/dts/r8a7744.dtsi
index 5050ac19041d..6b56aa286337 100644
--- a/arch/arm/boot/dts/r8a7744.dtsi
+++ b/arch/arm/boot/dts/r8a7744.dtsi
@@ -1520,7 +1520,7 @@
 			};
 		};
 
-		sdhi0: sd@ee100000 {
+		sdhi0: mmc@ee100000 {
 			compatible = "renesas,sdhi-r8a7744",
 				     "renesas,rcar-gen2-sdhi";
 			reg = <0 0xee100000 0 0x328>;
@@ -1535,7 +1535,7 @@
 			status = "disabled";
 		};
 
-		sdhi1: sd@ee140000 {
+		sdhi1: mmc@ee140000 {
 			compatible = "renesas,sdhi-r8a7744",
 				     "renesas,rcar-gen2-sdhi";
 			reg = <0 0xee140000 0 0x100>;
@@ -1550,7 +1550,7 @@
 			status = "disabled";
 		};
 
-		sdhi2: sd@ee160000 {
+		sdhi2: mmc@ee160000 {
 			compatible = "renesas,sdhi-r8a7744",
 				     "renesas,rcar-gen2-sdhi";
 			reg = <0 0xee160000 0 0x100>;
diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi
index b0d1fc24e97e..636248f370e0 100644
--- a/arch/arm/boot/dts/r8a7745.dtsi
+++ b/arch/arm/boot/dts/r8a7745.dtsi
@@ -1396,7 +1396,7 @@
 			};
 		};
 
-		sdhi0: sd@ee100000 {
+		sdhi0: mmc@ee100000 {
 			compatible = "renesas,sdhi-r8a7745",
 				     "renesas,rcar-gen2-sdhi";
 			reg = <0 0xee100000 0 0x328>;
@@ -1411,7 +1411,7 @@
 			status = "disabled";
 		};
 
-		sdhi1: sd@ee140000 {
+		sdhi1: mmc@ee140000 {
 			compatible = "renesas,sdhi-r8a7745",
 				     "renesas,rcar-gen2-sdhi";
 			reg = <0 0xee140000 0 0x100>;
@@ -1426,7 +1426,7 @@
 			status = "disabled";
 		};
 
-		sdhi2: sd@ee160000 {
+		sdhi2: mmc@ee160000 {
 			compatible = "renesas,sdhi-r8a7745",
 				     "renesas,rcar-gen2-sdhi";
 			reg = <0 0xee160000 0 0x100>;
diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi
index f55153192276..6baa126b6590 100644
--- a/arch/arm/boot/dts/r8a77470.dtsi
+++ b/arch/arm/boot/dts/r8a77470.dtsi
@@ -882,7 +882,7 @@
 			status = "disabled";
 		};
 
-		sdhi0: sd@ee100000 {
+		sdhi0: mmc@ee100000 {
 			compatible = "renesas,sdhi-r8a77470",
 				     "renesas,rcar-gen2-sdhi";
 			reg = <0 0xee100000 0 0x328>;
@@ -897,7 +897,7 @@
 			status = "disabled";
 		};
 
-		sdhi1: sd@ee300000 {
+		sdhi1: mmc@ee300000 {
 			compatible = "renesas,sdhi-mmc-r8a77470";
 			reg = <0 0xee300000 0 0x2000>;
 			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
@@ -908,7 +908,7 @@
 			status = "disabled";
 		};
 
-		sdhi2: sd@ee160000 {
+		sdhi2: mmc@ee160000 {
 			compatible = "renesas,sdhi-r8a77470",
 				     "renesas,rcar-gen2-sdhi";
 			reg = <0 0xee160000 0 0x328>;
diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi
index 593c6df90303..1612b003fb55 100644
--- a/arch/arm/boot/dts/r8a7778.dtsi
+++ b/arch/arm/boot/dts/r8a7778.dtsi
@@ -78,7 +78,8 @@
 			<0xfe780010 4>,
 			<0xfe780024 4>,
 			<0xfe780044 4>,
-			<0xfe780064 4>;
+			<0xfe780064 4>,
+			<0xfe780000 4>;
 		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
@@ -400,7 +401,7 @@
 		status = "disabled";
 	};
 
-	sdhi0: sd@ffe4c000 {
+	sdhi0: mmc@ffe4c000 {
 		compatible = "renesas,sdhi-r8a7778",
 			     "renesas,rcar-gen1-sdhi";
 		reg = <0xffe4c000 0x100>;
@@ -410,7 +411,7 @@
 		status = "disabled";
 	};
 
-	sdhi1: sd@ffe4d000 {
+	sdhi1: mmc@ffe4d000 {
 		compatible = "renesas,sdhi-r8a7778",
 			     "renesas,rcar-gen1-sdhi";
 		reg = <0xffe4d000 0x100>;
@@ -420,7 +421,7 @@
 		status = "disabled";
 	};
 
-	sdhi2: sd@ffe4f000 {
+	sdhi2: mmc@ffe4f000 {
 		compatible = "renesas,sdhi-r8a7778",
 			     "renesas,rcar-gen1-sdhi";
 		reg = <0xffe4f000 0x100>;
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index c0999e27e9b1..c5634daef96f 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -385,7 +385,7 @@
 		status = "disabled";
 	};
 
-	sdhi0: sd@ffe4c000 {
+	sdhi0: mmc@ffe4c000 {
 		compatible = "renesas,sdhi-r8a7779",
 			     "renesas,rcar-gen1-sdhi";
 		reg = <0xffe4c000 0x100>;
@@ -395,7 +395,7 @@
 		status = "disabled";
 	};
 
-	sdhi1: sd@ffe4d000 {
+	sdhi1: mmc@ffe4d000 {
 		compatible = "renesas,sdhi-r8a7779",
 			     "renesas,rcar-gen1-sdhi";
 		reg = <0xffe4d000 0x100>;
@@ -405,7 +405,7 @@
 		status = "disabled";
 	};
 
-	sdhi2: sd@ffe4e000 {
+	sdhi2: mmc@ffe4e000 {
 		compatible = "renesas,sdhi-r8a7779",
 			     "renesas,rcar-gen1-sdhi";
 		reg = <0xffe4e000 0x100>;
@@ -415,7 +415,7 @@
 		status = "disabled";
 	};
 
-	sdhi3: sd@ffe4f000 {
+	sdhi3: mmc@ffe4f000 {
 		compatible = "renesas,sdhi-r8a7779",
 			     "renesas,rcar-gen1-sdhi";
 		reg = <0xffe4f000 0x100>;
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index bfe778c4c47b..09a152b91557 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -343,7 +343,6 @@
 		composite-in@20 {
 			compatible = "adi,adv7180";
 			reg = <0x20>;
-			remote = <&vin1>;
 
 			port {
 				adv7180: endpoint {
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 166d5566229d..769ba2a33d39 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -1467,7 +1467,7 @@
 			};
 		};
 
-		sdhi0: sd@ee100000 {
+		sdhi0: mmc@ee100000 {
 			compatible = "renesas,sdhi-r8a7790",
 				     "renesas,rcar-gen2-sdhi";
 			reg = <0 0xee100000 0 0x328>;
@@ -1482,7 +1482,7 @@
 			status = "disabled";
 		};
 
-		sdhi1: sd@ee120000 {
+		sdhi1: mmc@ee120000 {
 			compatible = "renesas,sdhi-r8a7790",
 				     "renesas,rcar-gen2-sdhi";
 			reg = <0 0xee120000 0 0x328>;
@@ -1497,7 +1497,7 @@
 			status = "disabled";
 		};
 
-		sdhi2: sd@ee140000 {
+		sdhi2: mmc@ee140000 {
 			compatible = "renesas,sdhi-r8a7790",
 				     "renesas,rcar-gen2-sdhi";
 			reg = <0 0xee140000 0 0x100>;
@@ -1512,7 +1512,7 @@
 			status = "disabled";
 		};
 
-		sdhi3: sd@ee160000 {
+		sdhi3: mmc@ee160000 {
 			compatible = "renesas,sdhi-r8a7790",
 				     "renesas,rcar-gen2-sdhi";
 			reg = <0 0xee160000 0 0x100>;
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index fc74c6cd6def..f603cba5441f 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -366,7 +366,6 @@
 		composite-in@20 {
 			compatible = "adi,adv7180";
 			reg = <0x20>;
-			remote = <&vin1>;
 
 			port {
 				adv7180: endpoint {
diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts
index 114bf1c4199b..c6d563fb7ec7 100644
--- a/arch/arm/boot/dts/r8a7791-porter.dts
+++ b/arch/arm/boot/dts/r8a7791-porter.dts
@@ -162,7 +162,6 @@
 		composite-in@20 {
 			compatible = "adi,adv7180";
 			reg = <0x20>;
-			remote = <&vin0>;
 
 			port {
 				adv7180: endpoint {
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 225676fbe312..499cf388735f 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -1563,7 +1563,7 @@
 			};
 		};
 
-		sdhi0: sd@ee100000 {
+		sdhi0: mmc@ee100000 {
 			compatible = "renesas,sdhi-r8a7791",
 				     "renesas,rcar-gen2-sdhi";
 			reg = <0 0xee100000 0 0x328>;
@@ -1578,7 +1578,7 @@
 			status = "disabled";
 		};
 
-		sdhi1: sd@ee140000 {
+		sdhi1: mmc@ee140000 {
 			compatible = "renesas,sdhi-r8a7791",
 				     "renesas,rcar-gen2-sdhi";
 			reg = <0 0xee140000 0 0x100>;
@@ -1593,7 +1593,7 @@
 			status = "disabled";
 		};
 
-		sdhi2: sd@ee160000 {
+		sdhi2: mmc@ee160000 {
 			compatible = "renesas,sdhi-r8a7791",
 				     "renesas,rcar-gen2-sdhi";
 			reg = <0 0xee160000 0 0x100>;
diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi
index 4627eefa502b..597848ad4dfa 100644
--- a/arch/arm/boot/dts/r8a7792.dtsi
+++ b/arch/arm/boot/dts/r8a7792.dtsi
@@ -780,7 +780,7 @@
 			status = "disabled";
 		};
 
-		sdhi0: sd@ee100000 {
+		sdhi0: mmc@ee100000 {
 			compatible = "renesas,sdhi-r8a7792",
 				     "renesas,rcar-gen2-sdhi";
 			reg = <0 0xee100000 0 0x328>;
diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts
index 79baf06019f5..abf487e8fe0f 100644
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -334,9 +334,8 @@
 		composite-in@20 {
 			compatible = "adi,adv7180cp";
 			reg = <0x20>;
-			remote = <&vin1>;
 
-			port {
+			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
@@ -394,7 +393,7 @@
 			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 			default-input = <0>;
 
-			port {
+			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index 1b62a7e06b42..6d507091b163 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -1227,7 +1227,7 @@
 			dma-channels = <13>;
 		};
 
-		sdhi0: sd@ee100000 {
+		sdhi0: mmc@ee100000 {
 			compatible = "renesas,sdhi-r8a7793",
 				     "renesas,rcar-gen2-sdhi";
 			reg = <0 0xee100000 0 0x328>;
@@ -1242,7 +1242,7 @@
 			status = "disabled";
 		};
 
-		sdhi1: sd@ee140000 {
+		sdhi1: mmc@ee140000 {
 			compatible = "renesas,sdhi-r8a7793",
 				     "renesas,rcar-gen2-sdhi";
 			reg = <0 0xee140000 0 0x100>;
@@ -1257,7 +1257,7 @@
 			status = "disabled";
 		};
 
-		sdhi2: sd@ee160000 {
+		sdhi2: mmc@ee160000 {
 			compatible = "renesas,sdhi-r8a7793",
 				     "renesas,rcar-gen2-sdhi";
 			reg = <0 0xee160000 0 0x100>;
diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts
index 935935c1dbac..3f1cc5bbf329 100644
--- a/arch/arm/boot/dts/r8a7794-alt.dts
+++ b/arch/arm/boot/dts/r8a7794-alt.dts
@@ -167,7 +167,6 @@
 		composite-in@20 {
 			compatible = "adi,adv7180";
 			reg = <0x20>;
-			remote = <&vin0>;
 
 			port {
 				adv7180: endpoint {
diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts
index b8b0941f677c..677596f6c9c9 100644
--- a/arch/arm/boot/dts/r8a7794-silk.dts
+++ b/arch/arm/boot/dts/r8a7794-silk.dts
@@ -236,7 +236,6 @@
 		composite-in@20 {
 			compatible = "adi,adv7180";
 			reg = <0x20>;
-			remote = <&vin0>;
 
 			port {
 				adv7180: endpoint {
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 8d7f8798628a..5f340397ab64 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -1232,7 +1232,7 @@
 			};
 		};
 
-		sdhi0: sd@ee100000 {
+		sdhi0: mmc@ee100000 {
 			compatible = "renesas,sdhi-r8a7794",
 				     "renesas,rcar-gen2-sdhi";
 			reg = <0 0xee100000 0 0x328>;
@@ -1247,7 +1247,7 @@
 			status = "disabled";
 		};
 
-		sdhi1: sd@ee140000 {
+		sdhi1: mmc@ee140000 {
 			compatible = "renesas,sdhi-r8a7794",
 				     "renesas,rcar-gen2-sdhi";
 			reg = <0 0xee140000 0 0x100>;
@@ -1262,7 +1262,7 @@
 			status = "disabled";
 		};
 
-		sdhi2: sd@ee160000 {
+		sdhi2: mmc@ee160000 {
 			compatible = "renesas,sdhi-r8a7794",
 				     "renesas,rcar-gen2-sdhi";
 			reg = <0 0xee160000 0 0x100>;
diff --git a/arch/arm/boot/dts/r9a06g032.dtsi b/arch/arm/boot/dts/r9a06g032.dtsi
index 4c1ab49c7d39..ee59cc84f212 100644
--- a/arch/arm/boot/dts/r9a06g032.dtsi
+++ b/arch/arm/boot/dts/r9a06g032.dtsi
@@ -174,7 +174,7 @@
 		};
 
 		gic: interrupt-controller@44101000 {
-			compatible = "arm,cortex-a7-gic", "arm,gic-400";
+			compatible = "arm,gic-400", "arm,cortex-a7-gic";
 			interrupt-controller;
 			#interrupt-cells = <3>;
 			reg = <0x44101000 0x1000>, /* Distributer */
diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index d9a0c9a29b68..093567022386 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -67,6 +67,7 @@
 				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
 			arm,pl330-broken-no-flushp;
+			arm,pl330-periph-burst;
 			clocks = <&cru ACLK_DMAC2>;
 			clock-names = "apb_pclk";
 		};
diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi
index b0fd92befdeb..48e6e8d44a1a 100644
--- a/arch/arm/boot/dts/rk322x.dtsi
+++ b/arch/arm/boot/dts/rk322x.dtsi
@@ -107,6 +107,7 @@
 			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
+			arm,pl330-periph-burst;
 			clocks = <&cru ACLK_DMAC>;
 			clock-names = "apb_pclk";
 		};
@@ -520,9 +521,9 @@
 		resets = <&cru SRST_TSADC>;
 		reset-names = "tsadc-apb";
 		pinctrl-names = "init", "default", "sleep";
-		pinctrl-0 = <&otp_gpio>;
+		pinctrl-0 = <&otp_pin>;
 		pinctrl-1 = <&otp_out>;
-		pinctrl-2 = <&otp_gpio>;
+		pinctrl-2 = <&otp_pin>;
 		#thermal-sensor-cells = <0>;
 		rockchip,hw-tshut-temp = <95000>;
 		status = "disabled";
@@ -1111,7 +1112,7 @@
 		};
 
 		tsadc {
-			otp_gpio: otp-gpio {
+			otp_pin: otp-pin {
 				rockchip,pins = <0 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
 			};
 
diff --git a/arch/arm/boot/dts/rk3288-rock-pi-n8.dts b/arch/arm/boot/dts/rk3288-rock-pi-n8.dts
new file mode 100644
index 000000000000..b19593021713
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-rock-pi-n8.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2019 Vamrs Limited
+ * Copyright (c) 2019 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include "rk3288.dtsi"
+#include <arm/rockchip-radxa-dalang-carrier.dtsi>
+#include "rk3288-vmarc-som.dtsi"
+
+/ {
+	model = "Radxa ROCK Pi N8";
+	compatible = "radxa,rockpi-n8", "vamrs,rk3288-vmarc-som",
+		     "rockchip,rk3288";
+};
diff --git a/arch/arm/boot/dts/rk3288-veyron-jaq.dts b/arch/arm/boot/dts/rk3288-veyron-jaq.dts
index 171ba6185b6d..af77ab20586d 100644
--- a/arch/arm/boot/dts/rk3288-veyron-jaq.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-jaq.dts
@@ -44,10 +44,25 @@
 	};
 };
 
+&sdio0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	btmrvl: btmrvl@2 {
+		compatible = "marvell,sd8897-bt";
+		reg = <2>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <RK_PD7 IRQ_TYPE_LEVEL_LOW>;
+		marvell,wakeup-pin = /bits/ 16 <13>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_host_wake_l>;
+	};
+};
+
 &sdmmc {
 	disable-wp;
 	pinctrl-names = "default";
-	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_pin
 			&sdmmc_bus4>;
 };
 
diff --git a/arch/arm/boot/dts/rk3288-veyron-jerry.dts b/arch/arm/boot/dts/rk3288-veyron-jerry.dts
index 66f00d28801a..2c916c50dda5 100644
--- a/arch/arm/boot/dts/rk3288-veyron-jerry.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-jerry.dts
@@ -192,7 +192,7 @@
 &sdmmc {
 	disable-wp;
 	pinctrl-names = "default";
-	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_pin
 			&sdmmc_bus4>;
 };
 
diff --git a/arch/arm/boot/dts/rk3288-veyron-mighty.dts b/arch/arm/boot/dts/rk3288-veyron-mighty.dts
index 27fbc07476d2..fa695a88f236 100644
--- a/arch/arm/boot/dts/rk3288-veyron-mighty.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-mighty.dts
@@ -18,8 +18,8 @@
 };
 
 &sdmmc {
-	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
-			&sdmmc_wp_gpio &sdmmc_bus4>;
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_pin
+			&sdmmc_wp_pin &sdmmc_bus4>;
 	wp-gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>;
 
 	/delete-property/ disable-wp;
@@ -27,7 +27,7 @@
 
 &pinctrl {
 	sdmmc {
-		sdmmc_wp_gpio: sdmmc-wp-gpio {
+		sdmmc_wp_pin: sdmmc-wp-pin {
 			rockchip,pins = <7 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
index 383fad1a88a1..f8b69e0a16a0 100644
--- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts
@@ -114,7 +114,7 @@
 &sdmmc {
 	disable-wp;
 	pinctrl-names = "default";
-	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_pin
 			&sdmmc_bus4>;
 };
 
diff --git a/arch/arm/boot/dts/rk3288-veyron-pinky.dts b/arch/arm/boot/dts/rk3288-veyron-pinky.dts
index 71e6629cc208..4e9fdb0f722d 100644
--- a/arch/arm/boot/dts/rk3288-veyron-pinky.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-pinky.dts
@@ -105,7 +105,7 @@
 	};
 
 	sdmmc {
-		sdmmc_wp_gpio: sdmmc-wp-gpio {
+		sdmmc_wp_pin: sdmmc-wp-pin {
 			rockchip,pins = <7 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
@@ -126,8 +126,8 @@
 
 &sdmmc {
 	pinctrl-names = "default";
-	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
-		     &sdmmc_wp_gpio &sdmmc_bus4>;
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_pin
+		     &sdmmc_wp_pin &sdmmc_bus4>;
 	wp-gpios = <&gpio7 RK_PB2 GPIO_ACTIVE_HIGH>;
 };
 
diff --git a/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi
index fe950f9863e8..27fb06ce907e 100644
--- a/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi
@@ -41,7 +41,7 @@
 		};
 
 		/* This is where we actually hook up CD */
-		sdmmc_cd_gpio: sdmmc-cd-gpio {
+		sdmmc_cd_pin: sdmmc-cd-pin {
 			rockchip,pins = <7 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
diff --git a/arch/arm/boot/dts/rk3288-veyron-speedy.dts b/arch/arm/boot/dts/rk3288-veyron-speedy.dts
index e354c61a45e7..4a3ea934d03e 100644
--- a/arch/arm/boot/dts/rk3288-veyron-speedy.dts
+++ b/arch/arm/boot/dts/rk3288-veyron-speedy.dts
@@ -54,7 +54,7 @@
 &sdmmc {
 	disable-wp;
 	pinctrl-names = "default";
-	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_pin
 			&sdmmc_bus4>;
 };
 
diff --git a/arch/arm/boot/dts/rk3288-vmarc-som.dtsi b/arch/arm/boot/dts/rk3288-vmarc-som.dtsi
new file mode 100644
index 000000000000..4a373f5aa600
--- /dev/null
+++ b/arch/arm/boot/dts/rk3288-vmarc-som.dtsi
@@ -0,0 +1,322 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2019 Vamrs Limited
+ * Copyright (c) 2019 Amarula Solutions(India)
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+
+/ {
+	compatible = "vamrs,rk3288-vmarc-som", "rockchip,rk3288";
+
+	vccio_flash: vccio-flash-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vccio_flash";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_io>;
+	};
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	disable-wp;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vccio_flash>;
+	status = "okay";
+};
+
+&gmac {
+	assigned-clocks = <&cru SCLK_MAC>;
+	phy-supply = <&vcc_io>;
+	snps,reset-gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c5>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_cec_c0>;
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	rk808: pmic@1b {
+		compatible = "rockchip,rk808";
+		reg = <0x1b>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int &global_pwroff>;
+		rockchip,system-power-controller;
+		wakeup-source;
+		#clock-cells = <1>;
+		clock-output-names = "rk808-clkout1", "rk808-clkout2";
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc_io>;
+		vcc9-supply = <&vcc_io>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc5v0_sys>;
+		vcc12-supply = <&vcc_io>;
+		vddio-supply = <&vcc_io>;
+
+		regulators {
+			vdd_cpu: DCDC_REG1 {
+				regulator-name = "vdd_arm";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-name = "vdd_gpu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-ramp-delay = <6000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_io: DCDC_REG4 {
+				regulator-name = "vcc_io";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcc_tp: LDO_REG1 {
+				regulator-name = "vcc_tp";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca_codec: LDO_REG2 {
+				regulator-name = "vcca_codec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vdd_10: LDO_REG3 {
+				regulator-name = "vdd_10";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1000000>;
+				};
+			};
+
+			vcc_wl: LDO_REG4 {
+				regulator-name = "vcc_wl";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vdd10_lcd: LDO_REG6 {
+				regulator-name = "vdd10_lcd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_18: LDO_REG7 {
+				regulator-name = "vcc_18";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcc18_lcd: LDO_REG8 {
+				regulator-name = "vcc18_lcd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_sd: SWITCH_REG1 {
+				regulator-name = "vcc_sd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_lcd: SWITCH_REG2 {
+				regulator-name = "vcc_lcd";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&io_domains {
+	bb-supply = <&vcc_io>;
+	flash0-supply = <&vccio_flash>;
+	gpio1830-supply = <&vcc_18>;
+	gpio30-supply = <&vcc_io>;
+	sdcard-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&pinctrl {
+	pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
+		drive-strength = <8>;
+	};
+
+	pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
+		bias-pull-up;
+		drive-strength = <8>;
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdmmc {
+		sdmmc_bus4: sdmmc-bus4 {
+			rockchip,pins =
+				<6 RK_PC0 1 &pcfg_pull_up_drv_8ma>,
+				<6 RK_PC1 1 &pcfg_pull_up_drv_8ma>,
+				<6 RK_PC2 1 &pcfg_pull_up_drv_8ma>,
+				<6 RK_PC3 1 &pcfg_pull_up_drv_8ma>;
+		};
+
+		sdmmc_clk: sdmmc-clk {
+			rockchip,pins = <6 RK_PC4 1 &pcfg_pull_none_drv_8ma>;
+		};
+
+		sdmmc_cmd: sdmmc-cmd {
+			rockchip,pins = <6 RK_PC5 1 &pcfg_pull_up_drv_8ma>;
+		};
+	};
+
+	vbus_host {
+		usb1_en_oc: usb1-en-oc {
+			rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	vbus_typec {
+		usb0_en_oc: usb0-en-oc {
+			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1 {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&vbus_host {
+	enable-active-high;
+	gpio = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>; /* USB1_EN_OC# */
+};
+
+&vbus_typec {
+	enable-active-high;
+	gpio = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; /* USB0_EN_OC# */
+};
diff --git a/arch/arm/boot/dts/rk3288-vyasa.dts b/arch/arm/boot/dts/rk3288-vyasa.dts
index 385dd59393e1..1a20854a1317 100644
--- a/arch/arm/boot/dts/rk3288-vyasa.dts
+++ b/arch/arm/boot/dts/rk3288-vyasa.dts
@@ -99,8 +99,6 @@
 		pinctrl-0 = <&otg_vbus_drv>;
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		regulator-boot-on;
 		vin-supply = <&vsus_5v>;
 	};
 
@@ -416,6 +414,7 @@
 };
 
 &usb_otg {
+	vbus-supply = <&vusb1_5v>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 2e1edd85f04a..68d5a58cfe88 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -167,6 +167,7 @@
 				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
 			arm,pl330-broken-no-flushp;
+			arm,pl330-periph-burst;
 			clocks = <&cru ACLK_DMAC2>;
 			clock-names = "apb_pclk";
 		};
@@ -178,6 +179,7 @@
 				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
 			arm,pl330-broken-no-flushp;
+			arm,pl330-periph-burst;
 			clocks = <&cru ACLK_DMAC1>;
 			clock-names = "apb_pclk";
 			status = "disabled";
@@ -190,6 +192,7 @@
 				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
 			arm,pl330-broken-no-flushp;
+			arm,pl330-periph-burst;
 			clocks = <&cru ACLK_DMAC1>;
 			clock-names = "apb_pclk";
 		};
@@ -574,9 +577,9 @@
 		resets = <&cru SRST_TSADC>;
 		reset-names = "tsadc-apb";
 		pinctrl-names = "init", "default", "sleep";
-		pinctrl-0 = <&otp_gpio>;
+		pinctrl-0 = <&otp_pin>;
 		pinctrl-1 = <&otp_out>;
-		pinctrl-2 = <&otp_gpio>;
+		pinctrl-2 = <&otp_pin>;
 		#thermal-sensor-cells = <1>;
 		rockchip,grf = <&grf>;
 		rockchip,hw-tshut-temp = <95000>;
@@ -613,7 +616,16 @@
 		status = "disabled";
 	};
 
-	/* NOTE: ohci@ff520000 doesn't actually work on hardware */
+	/* NOTE: doesn't work on RK3288, but was fixed on RK3288W */
+	usb_host0_ohci: usb@ff520000 {
+		compatible = "generic-ohci";
+		reg = <0x0 0xff520000 0x0 0x100>;
+		interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_USBHOST0>;
+		phys = <&usbphy1>;
+		phy-names = "usb";
+		status = "disabled";
+	};
 
 	usb_host1: usb@ff540000 {
 		compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb",
@@ -1929,7 +1941,7 @@
 		};
 
 		tsadc {
-			otp_gpio: otp-gpio {
+			otp_pin: otp-pin {
 				rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
 			};
 
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
index d929b60517ab..859a7477909f 100644
--- a/arch/arm/boot/dts/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -45,6 +45,7 @@
 				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
 			arm,pl330-broken-no-flushp;
+			arm,pl330-periph-burst;
 			clocks = <&cru ACLK_DMA1>;
 			clock-names = "apb_pclk";
 		};
@@ -56,6 +57,7 @@
 				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
 			arm,pl330-broken-no-flushp;
+			arm,pl330-periph-burst;
 			clocks = <&cru ACLK_DMA1>;
 			clock-names = "apb_pclk";
 			status = "disabled";
@@ -68,6 +70,7 @@
 				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
 			arm,pl330-broken-no-flushp;
+			arm,pl330-periph-burst;
 			clocks = <&cru ACLK_DMA2>;
 			clock-names = "apb_pclk";
 		};
diff --git a/arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi b/arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi
index df3712aedf8a..26b53eac4706 100644
--- a/arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi
+++ b/arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi
@@ -8,36 +8,66 @@
 #include <dt-bindings/pwm/pwm.h>
 
 / {
-	chosen {
-		stdout-path = "serial2:1500000n8";
+	clkin_gmac: external-gmac-clock {
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+		clock-output-names = "clkin_gmac";
+		#clock-cells = <0>;
 	};
-};
 
-&gmac {
-	status = "okay";
+	vcc12v_dcin: vcc12v-dcin-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vbus_host: vbus-host {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb1_en_oc>;
+		regulator-name = "vbus_host"; /* HOST-5V */
+		regulator-always-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vbus_typec: vbus-typec {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb0_en_oc>;
+		regulator-name = "vbus_typec";
+		regulator-always-on;
+		vin-supply = <&vcc5v0_sys>;
+	};
 };
 
-&i2c1 {
+&gmac {
+	assigned-clock-parents = <&clkin_gmac>;
+	clock_in_out = "input";
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x28>;
+	rx_delay = <0x11>;
 	status = "okay";
-	i2c-scl-rising-time-ns = <140>;
-	i2c-scl-falling-time-ns = <30>;
 };
 
-&i2c2 {
+&hdmi {
 	status = "okay";
-	clock-frequency = <400000>;
-
-	hym8563: hym8563@51 {
-		compatible = "haoyu,hym8563";
-		reg = <0x51>;
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
-		clock-output-names = "hym8563";
-		pinctrl-names = "default";
-		pinctrl-0 = <&hym8563_int>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
-	};
 };
 
 &pwm0 {
@@ -52,10 +82,8 @@
 	bus-width = <4>;
 	cap-mmc-highspeed;
 	cap-sd-highspeed;
-	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
 	disable-wp;
 	vqmmc-supply = <&vccio_sd>;
-	max-frequency = <150000000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
 	status = "okay";
@@ -71,11 +99,18 @@
 	status = "okay";
 };
 
-&pinctrl {
-	hym8563 {
-		hym8563_int: hym8563-int {
-			rockchip,pins =
-				<4 RK_PD6 0 &pcfg_pull_up>;
-		};
-	};
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi
index f9cfe2c80791..a1a08cb9364e 100644
--- a/arch/arm/boot/dts/rv1108.dtsi
+++ b/arch/arm/boot/dts/rv1108.dtsi
@@ -97,6 +97,7 @@
 			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
 			arm,pl330-broken-no-flushp;
+			arm,pl330-periph-burst;
 			clocks = <&cru ACLK_DMAC>;
 			clock-names = "apb_pclk";
 		};
@@ -351,9 +352,9 @@
 		clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
 		clock-names = "tsadc", "apb_pclk";
 		pinctrl-names = "init", "default", "sleep";
-		pinctrl-0 = <&otp_gpio>;
+		pinctrl-0 = <&otp_pin>;
 		pinctrl-1 = <&otp_out>;
-		pinctrl-2 = <&otp_gpio>;
+		pinctrl-2 = <&otp_pin>;
 		resets = <&cru SRST_TSADC>;
 		reset-names = "tsadc-apb";
 		rockchip,hw-tshut-temp = <120000>;
@@ -728,7 +729,7 @@
 						<0 RK_PC6 3 &pcfg_pull_none>;
 			};
 
-			i2c2m1_gpio: i2c2m1-gpio {
+			i2c2m1_pins: i2c2m1-pins {
 				rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>,
 						<0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
 			};
@@ -740,7 +741,7 @@
 						<1 RK_PD4 2 &pcfg_pull_none>;
 			};
 
-			i2c2m05v_gpio: i2c2m05v-gpio {
+			i2c2m05v_pins: i2c2m05v-pins {
 				rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>,
 						<1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
 			};
@@ -867,7 +868,7 @@
 				rockchip,pins = <0 RK_PB7 1 &pcfg_pull_none>;
 			};
 
-			otp_gpio: otp-gpio {
+			otp_pin: otp-pin {
 				rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
 			};
 		};
@@ -886,7 +887,7 @@
 				rockchip,pins = <3 RK_PA3 1 &pcfg_pull_none>;
 			};
 
-			uart0_rts_gpio: uart0-rts-gpio {
+			uart0_rts_pin: uart0-rts-pin {
 				rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
 			};
 		};
diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi
index cf858029292e..822207f63ee0 100644
--- a/arch/arm/boot/dts/s5pv210-aries.dtsi
+++ b/arch/arm/boot/dts/s5pv210-aries.dtsi
@@ -69,6 +69,18 @@
 		pinctrl-0 = <&touchkey_vdd_ena>;
 	};
 
+	gp2a_vled: regulator-fixed-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "VLED";
+		enable-active-high;
+		gpio = <&gpj1 4 GPIO_ACTIVE_HIGH>;
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gp2a_power>;
+	};
+
 	wifi_pwrseq: wifi-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&gpg1 2 GPIO_ACTIVE_LOW>;
@@ -137,9 +149,13 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&accel_i2c_pins>;
 
-		status = "disabled";
+		accelerometer@38 {
+			compatible = "bosch,bma023";
+			reg = <0x38>;
 
-		/* bma023 accelerometer, no mainline binding */
+			vdd-supply = <&ldo9_reg>;
+			vddio-supply = <&ldo9_reg>;
+		};
 	};
 
 	i2c_pmic: i2c-gpio-2 {
@@ -425,10 +441,8 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&fg_i2c_pins>;
 
-		fuelgauge@36 {
+		fg: fuelgauge@36 {
 			compatible = "maxim,max17040";
-			interrupt-parent = <&vic0>;
-			interrupts = <7>;
 			reg = <0x36>;
 		};
 	};
@@ -470,9 +484,21 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&prox_i2c_pins>;
 
-		status = "disabled";
+		light-sensor@44 {
+			compatible = "sharp,gp2ap002a00f";
+			reg = <0x44>;
+			interrupt-parent = <&gph0>;
+			interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+			vdd-supply = <&gp2a_vled>;
+			vio-supply = <&gp2a_vled>;
+			io-channels = <&gp2a_shunt>;
+			io-channel-names = "alsout";
+			sharp,proximity-far-hysteresis = /bits/ 8 <0x40>;
+			sharp,proximity-close-hysteresis = /bits/ 8 <0x20>;
 
-		/* Sharp gp2a prox/light sensor, incomplete mainline binding */
+			pinctrl-names = "default";
+			pinctrl-0 = <&gp2a_irq>;
+		};
 	};
 
 	i2c_magnetometer: i2c-gpio-7 {
@@ -545,6 +571,14 @@
 	vdd-supply = <&ldo4_reg>;
 
 	status = "okay";
+
+	gp2a_shunt: current-sense-shunt {
+		compatible = "current-sense-shunt";
+		io-channels = <&adc 9>;
+		shunt-resistor-micro-ohms = <47000000>; /* 47 ohms */
+		#io-channel-cells = <0>;
+		io-channel-ranges;
+	};
 };
 
 &fimd {
@@ -595,6 +629,13 @@
 };
 
 &pinctrl0 {
+	bt_reset: bt-reset {
+		samsung,pins = "gpb-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
 	wlan_bt_en: wlan-bt-en {
 		samsung,pins = "gpb-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
@@ -620,6 +661,19 @@
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
+	bt_wake: bt-wake {
+		samsung,pins = "gpg3-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	gp2a_irq: gp2a-irq {
+		samsung,pins = "gph0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
 	pmic_dvs_pins: pmic-dvs-pins {
 		samsung,pins = "gph0-3", "gph0-4", "gph0-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
@@ -688,6 +742,13 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
+	gp2a_power: gp2a-power {
+		samsung,pins = "gpj1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
 	touchkey_i2c_pins: touchkey-i2c-pins {
 		samsung,pins = "gpj3-0", "gpj3-1";
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
@@ -797,16 +858,23 @@
 };
 
 &uart0 {
+	assigned-clocks = <&clocks MOUT_UART0>, <&clocks SCLK_UART0>;
+	assigned-clock-rates = <0>, <111166667>;
+	assigned-clock-parents = <&clocks MOUT_MPLL>;
+
 	status = "okay";
 
 	bluetooth {
-		compatible = "brcm,bcm43438-bt";
-		max-speed = <115200>;
+		compatible = "brcm,bcm4329-bt";
+		max-speed = <3000000>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&uart0_data &uart0_fctl &bt_host_wake>;
+		pinctrl-0 = <&uart0_data &uart0_fctl &bt_host_wake
+			     &bt_reset &bt_wake>;
 		shutdown-gpios = <&gpb 3 GPIO_ACTIVE_HIGH>;
 		device-wakeup-gpios = <&gpg3 4 GPIO_ACTIVE_HIGH>;
-		host-wakeup-gpios = <&gph2 5 GPIO_ACTIVE_HIGH>;
+		interrupt-parent = <&gph2>;
+		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
 	};
 };
 
diff --git a/arch/arm/boot/dts/s5pv210-fascinate4g.dts b/arch/arm/boot/dts/s5pv210-fascinate4g.dts
index 5e1b81823a8d..65eed01cfced 100644
--- a/arch/arm/boot/dts/s5pv210-fascinate4g.dts
+++ b/arch/arm/boot/dts/s5pv210-fascinate4g.dts
@@ -37,10 +37,27 @@
 	};
 };
 
+&fg {
+	compatible = "maxim,max77836-battery";
+
+	interrupt-parent = <&gph3>;
+	interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&fg_irq>;
+};
+
 &pinctrl0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&sleep_cfg>;
 
+	fg_irq: fg-irq {
+		samsung,pins = "gph3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
 	/* Based on vendor kernel v2.6.35.7 */
 	sleep_cfg: sleep-cfg {
 		PIN_SLP(gpa0-0, PREV, NONE);
diff --git a/arch/arm/boot/dts/s5pv210-pinctrl.dtsi b/arch/arm/boot/dts/s5pv210-pinctrl.dtsi
index 5e8b66281f01..b8c5172c31dd 100644
--- a/arch/arm/boot/dts/s5pv210-pinctrl.dtsi
+++ b/arch/arm/boot/dts/s5pv210-pinctrl.dtsi
@@ -273,6 +273,8 @@
 	gph3: gph3 {
 		gpio-controller;
 		#gpio-cells = <2>;
+
+		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
 
diff --git a/arch/arm/boot/dts/sam9x60.dtsi b/arch/arm/boot/dts/sam9x60.dtsi
index 6763423d64b8..d10843da4a85 100644
--- a/arch/arm/boot/dts/sam9x60.dtsi
+++ b/arch/arm/boot/dts/sam9x60.dtsi
@@ -661,6 +661,13 @@
 				status = "disabled";
 			};
 
+			rtt: rtt@fffffe20 {
+				compatible = "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt";
+				reg = <0xfffffe20 0x20>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k 0>;
+			};
+
 			pit: timer@fffffe40 {
 				compatible = "atmel,at91sam9260-pit";
 				reg = <0xfffffe40 0x10>;
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index 31d8766ec7ef..d7f25706892d 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -375,23 +375,23 @@
 			};
 
 			tcb0: timer@f800c000 {
-				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				compatible = "atmel,sama5d2-tcb", "simple-mfd", "syscon";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0xf800c000 0x100>;
 				interrupts = <35 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 35>, <&clk32k>;
-				clock-names = "t0_clk", "slow_clk";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 35>, <&pmc PMC_TYPE_GCK 35>, <&clk32k>;
+				clock-names = "t0_clk", "gclk", "slow_clk";
 			};
 
 			tcb1: timer@f8010000 {
-				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				compatible = "atmel,sama5d2-tcb", "simple-mfd", "syscon";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0xf8010000 0x100>;
 				interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 36>, <&clk32k>;
-				clock-names = "t0_clk", "slow_clk";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 36>, <&pmc PMC_TYPE_GCK 36>, <&clk32k>;
+				clock-names = "t0_clk", "gclk", "slow_clk";
 			};
 
 			hsmc: hsmc@f8014000 {
diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi
index 01fd06328420..a4d63125ac56 100644
--- a/arch/arm/boot/dts/sh73a0.dtsi
+++ b/arch/arm/boot/dts/sh73a0.dtsi
@@ -321,7 +321,7 @@
 		status = "disabled";
 	};
 
-	sdhi0: sd@ee100000 {
+	sdhi0: mmc@ee100000 {
 		compatible = "renesas,sdhi-sh73a0";
 		reg = <0xee100000 0x100>;
 		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
@@ -334,7 +334,7 @@
 	};
 
 	/* SDHI1 and SDHI2 have no CD pins, no need for CD IRQ */
-	sdhi1: sd@ee120000 {
+	sdhi1: mmc@ee120000 {
 		compatible = "renesas,sdhi-sh73a0";
 		reg = <0xee120000 0x100>;
 		interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
@@ -346,7 +346,7 @@
 		status = "disabled";
 	};
 
-	sdhi2: sd@ee140000 {
+	sdhi2: mmc@ee140000 {
 		compatible = "renesas,sdhi-sh73a0";
 		reg = <0xee140000 0x100>;
 		interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
@@ -584,6 +584,7 @@
 		compatible = "renesas,fsi2-sh73a0", "renesas,sh_fsi2";
 		reg = <0xec230000 0x400>;
 		interrupts = <GIC_SPI 146 0x4>;
+		clocks = <&mstp3_clks SH73A0_CLK_FSI>;
 		power-domains = <&pd_a4mp>;
 		status = "disabled";
 	};
diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index c2b54af417a2..0b021eef0b53 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -726,7 +726,7 @@
 			};
 		};
 
-		L2: l2-cache@fffef000 {
+		L2: cache-controller@fffef000 {
 			compatible = "arm,pl310-cache";
 			reg = <0xfffef000 0x1000>;
 			interrupts = <0 38 0x04>;
@@ -829,6 +829,7 @@
 			num-cs = <4>;
 			clocks = <&spi_m_clk>;
 			resets = <&rst SPIM0_RESET>;
+			reset-names = "spi";
 			status = "disabled";
 		};
 
@@ -841,6 +842,7 @@
 			num-cs = <4>;
 			clocks = <&spi_m_clk>;
 			resets = <&rst SPIM1_RESET>;
+			reset-names = "spi";
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi
index 3b8571b8b412..fc4abef143a0 100644
--- a/arch/arm/boot/dts/socfpga_arria10.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10.dtsi
@@ -613,6 +613,7 @@
 			/*32bit_access;*/
 			clocks = <&spi_m_clk>;
 			resets = <&rst SPIM0_RESET>;
+			reset-names = "spi";
 			status = "disabled";
 		};
 
@@ -628,6 +629,7 @@
 			rx-dma-channel = <&pdma 17>;
 			clocks = <&spi_m_clk>;
 			resets = <&rst SPIM1_RESET>;
+			reset-names = "spi";
 			status = "disabled";
 		};
 
@@ -636,7 +638,7 @@
 			reg = <0xffcfb100 0x80>;
 		};
 
-		L2: l2-cache@fffff000 {
+		L2: cache-controller@fffff000 {
 			compatible = "arm,pl310-cache";
 			reg = <0xfffff000 0x1000>;
 			interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
index 0efbeccc5cd2..7edebe20e859 100644
--- a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
@@ -162,6 +162,11 @@
 		compatible = "ltc2977";
 		reg = <0x5c>;
 	};
+
+	temp@4c {
+		compatible = "maxim,max1619";
+		reg = <0x4c>;
+	};
 };
 
 &uart1 {
diff --git a/arch/arm/boot/dts/ste-ab8500.dtsi b/arch/arm/boot/dts/ste-ab8500.dtsi
index 3cd6ee6d50e0..aab5719cc1a9 100644
--- a/arch/arm/boot/dts/ste-ab8500.dtsi
+++ b/arch/arm/boot/dts/ste-ab8500.dtsi
@@ -201,7 +201,19 @@
 					compatible = "stericsson,ab8500-sysctrl";
 				};
 
-				ab8500-pwm {
+				ab8500-pwm-1 {
+					compatible = "stericsson,ab8500-pwm";
+					clocks = <&ab8500_clock AB8500_SYSCLK_INT>;
+					clock-names = "intclk";
+				};
+
+				ab8500-pwm-2 {
+					compatible = "stericsson,ab8500-pwm";
+					clocks = <&ab8500_clock AB8500_SYSCLK_INT>;
+					clock-names = "intclk";
+				};
+
+				ab8500-pwm-3 {
 					compatible = "stericsson,ab8500-pwm";
 					clocks = <&ab8500_clock AB8500_SYSCLK_INT>;
 					clock-names = "intclk";
diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index 3e10da3f8fd3..05fd544b06c1 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -260,7 +260,7 @@
 			reg = <0x80150000 0x2000>;
 		};
 
-		L2: l2-cache {
+		L2: cache-controller {
 			compatible = "arm,pl310-cache";
 			reg = <0xa0412000 0x1000>;
 			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
index f78b4eabd68c..4f38aeecadb3 100644
--- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
+++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
@@ -15,7 +15,7 @@
 		    <0x08000000 0x04000000>;
 	};
 
-	L2: l2-cache {
+	L2: cache-controller {
 		compatible = "arm,l210-cache";
 		reg = <0x10210000 0x1000>;
 		interrupt-parent = <&vica>;
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
index 5b499c0b2745..1e26b711d43d 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
@@ -24,6 +24,32 @@
 		stdout-path = &serial2;
 	};
 
+	i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio2 14 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio2 13 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_gpio_0_default>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		touchkey@20 {
+			compatible = "coreriver,tc360-touchkey";
+			reg = <0x20>;
+			vdd-supply = <&ab8500_ldo_aux4_reg>;
+			vcc-supply = <&ab8500_ldo_aux6_reg>;
+
+			interrupt-parent = <&gpio2>;
+			interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&touchkey_default>;
+			linux,keycodes = <KEY_MENU KEY_BACK>;
+		};
+	};
+
 	i2c-gpio-1 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpio4 24 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
@@ -403,6 +429,16 @@
 		};
 	};
 
+	i2c-gpio-0 {
+		i2c_gpio_0_default: i2c_gpio_0 {
+			golden_cfg1 {
+				pins = "GPIO77",	/* TOUCHKEY_SCL */
+				       "GPIO78";	/* TOUCHKEY_SDA */
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+
 	i2c-gpio-1 {
 		i2c_gpio_1_default: i2c_gpio_1 {
 			golden_cfg1 {
@@ -413,6 +449,15 @@
 		};
 	};
 
+	touchkey {
+		touchkey_default: touchkey_default {
+			golden_cfg1 {
+				pins = "GPIO79";	/* TOUCHKEY_INT */
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+
 	sdi0 {
 		sd_level_translator_default: sd_level_translator_default {
 			golden_cfg1 {
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
index 8edef161613a..d6f6ac04a48a 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
@@ -349,8 +349,8 @@
 				interrupt-parent = <&gpio7>;
 				interrupts = <0 IRQ_TYPE_EDGE_RISING>;
 
-				mount-matrix = "0", "1", "0",
-					       "-1", "0", "0",
+				mount-matrix = "0", "-1", "0",
+					      "1", "0", "0",
 					       "0", "0", "1";
 				vdd-supply = <&ab8500_ldo_aux1_reg>;
 				vddio-supply = <&ab8500_ldo_aux8_reg>;
diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts
index c27fa355e5ab..67e7648de41e 100644
--- a/arch/arm/boot/dts/stm32429i-eval.dts
+++ b/arch/arm/boot/dts/stm32429i-eval.dts
@@ -104,17 +104,17 @@
 
 	leds {
 		compatible = "gpio-leds";
-		green {
+		led-green {
 			gpios = <&gpiog 6 1>;
 			linux,default-trigger = "heartbeat";
 		};
-		orange {
+		led-orange {
 			gpios = <&gpiog 7 1>;
 		};
-		red {
+		led-red {
 			gpios = <&gpiog 10 1>;
 		};
-		blue {
+		led-blue {
 			gpios = <&gpiog 12 1>;
 		};
 	};
@@ -240,7 +240,7 @@
 
 &ltdc {
 	status = "okay";
-	pinctrl-0 = <&ltdc_pins>;
+	pinctrl-0 = <&ltdc_pins_a>;
 	pinctrl-names = "default";
 
 	port {
diff --git a/arch/arm/boot/dts/stm32746g-eval.dts b/arch/arm/boot/dts/stm32746g-eval.dts
index 4ea3f98dd275..ca8c192449ee 100644
--- a/arch/arm/boot/dts/stm32746g-eval.dts
+++ b/arch/arm/boot/dts/stm32746g-eval.dts
@@ -66,17 +66,17 @@
 
 	leds {
 		compatible = "gpio-leds";
-		green {
+		led-green {
 			gpios = <&gpiof 10 1>;
 			linux,default-trigger = "heartbeat";
 		};
-		orange {
+		led-orange {
 			gpios = <&stmfx_pinctrl 17 1>;
 		};
-		red {
+		led-red {
 			gpios = <&gpiob 7 1>;
 		};
-		blue {
+		led-blue {
 			gpios = <&stmfx_pinctrl 19 1>;
 		};
 	};
diff --git a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
index 392fa143ce07..4774163af54b 100644
--- a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
@@ -257,7 +257,7 @@
 				};
 			};
 
-			pwm1_pins: pwm-1 {
+			pwm1_pins: pwm1-0 {
 				pins {
 					pinmux = <STM32_PINMUX('A', 8, AF1)>, /* TIM1_CH1 */
 						 <STM32_PINMUX('B', 13, AF1)>, /* TIM1_CH1N */
@@ -265,7 +265,7 @@
 				};
 			};
 
-			pwm3_pins: pwm-3 {
+			pwm3_pins: pwm3-0 {
 				pins {
 					pinmux = <STM32_PINMUX('B', 4, AF2)>, /* TIM3_CH1 */
 						 <STM32_PINMUX('B', 5, AF2)>; /* TIM3_CH2 */
@@ -282,7 +282,7 @@
 				};
 			};
 
-			ltdc_pins: ltdc-0 {
+			ltdc_pins_a: ltdc-0 {
 				pins {
 					pinmux = <STM32_PINMUX('I', 12, AF14)>, /* LCD_HSYNC */
 						 <STM32_PINMUX('I', 13, AF14)>, /* LCD_VSYNC */
@@ -316,6 +316,85 @@
 				};
 			};
 
+			ltdc_pins_b: ltdc-1 {
+				pins {
+					pinmux = <STM32_PINMUX('C', 6,  AF14)>,
+						/* LCD_HSYNC */
+						 <STM32_PINMUX('A', 4,  AF14)>,
+						 /* LCD_VSYNC */
+						 <STM32_PINMUX('G', 7,  AF14)>,
+						 /* LCD_CLK */
+						 <STM32_PINMUX('C', 10, AF14)>,
+						 /* LCD_R2 */
+						 <STM32_PINMUX('B', 0,  AF9)>,
+						 /* LCD_R3 */
+						 <STM32_PINMUX('A', 11, AF14)>,
+						 /* LCD_R4 */
+						 <STM32_PINMUX('A', 12, AF14)>,
+						 /* LCD_R5 */
+						 <STM32_PINMUX('B', 1,  AF9)>,
+						 /* LCD_R6*/
+						 <STM32_PINMUX('G', 6,  AF14)>,
+						 /* LCD_R7 */
+						 <STM32_PINMUX('A', 6,  AF14)>,
+						 /* LCD_G2 */
+						 <STM32_PINMUX('G', 10, AF9)>,
+						 /* LCD_G3 */
+						 <STM32_PINMUX('B', 10, AF14)>,
+						 /* LCD_G4 */
+						 <STM32_PINMUX('D', 6,  AF14)>,
+						 /* LCD_B2 */
+						 <STM32_PINMUX('G', 11, AF14)>,
+						 /* LCD_B3*/
+						 <STM32_PINMUX('B', 11, AF14)>,
+						 /* LCD_G5 */
+						 <STM32_PINMUX('C', 7,  AF14)>,
+						 /* LCD_G6 */
+						 <STM32_PINMUX('D', 3,  AF14)>,
+						 /* LCD_G7 */
+						 <STM32_PINMUX('G', 12, AF9)>,
+						 /* LCD_B4 */
+						 <STM32_PINMUX('A', 3,  AF14)>,
+						 /* LCD_B5 */
+						 <STM32_PINMUX('B', 8,  AF14)>,
+						 /* LCD_B6 */
+						 <STM32_PINMUX('B', 9,  AF14)>,
+						 /* LCD_B7 */
+						 <STM32_PINMUX('F', 10, AF14)>;
+						 /* LCD_DE */
+					slew-rate = <2>;
+				};
+			};
+
+			spi5_pins: spi5-0 {
+				pins1 {
+					pinmux = <STM32_PINMUX('F', 7, AF5)>,
+						/* SPI5_CLK */
+						 <STM32_PINMUX('F', 9, AF5)>;
+						/* SPI5_MOSI */
+					bias-disable;
+					drive-push-pull;
+					slew-rate = <0>;
+				};
+				pins2 {
+					pinmux = <STM32_PINMUX('F', 8, AF5)>;
+						/* SPI5_MISO */
+					bias-disable;
+				};
+			};
+
+			i2c3_pins: i2c3-0 {
+				pins {
+					pinmux = <STM32_PINMUX('C', 9, AF4)>,
+						/* I2C3_SDA */
+						 <STM32_PINMUX('A', 8, AF4)>;
+						/* I2C3_SCL */
+					bias-disable;
+					drive-open-drain;
+					slew-rate = <3>;
+				};
+			};
+
 			dcmi_pins: dcmi-0 {
 				pins {
 					pinmux = <STM32_PINMUX('A', 4, AF13)>, /* DCMI_HSYNC */
diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts
index 30c0f6717871..3dc068b91ca1 100644
--- a/arch/arm/boot/dts/stm32f429-disco.dts
+++ b/arch/arm/boot/dts/stm32f429-disco.dts
@@ -49,6 +49,8 @@
 #include "stm32f429.dtsi"
 #include "stm32f429-pinctrl.dtsi"
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "STMicroelectronics STM32F429i-DISCO board";
@@ -70,10 +72,10 @@
 
 	leds {
 		compatible = "gpio-leds";
-		red {
+		led-red {
 			gpios = <&gpiog 14 0>;
 		};
-		green {
+		led-green {
 			gpios = <&gpiog 13 0>;
 			linux,default-trigger = "heartbeat";
 		};
@@ -108,12 +110,103 @@
 	status = "okay";
 };
 
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	stmpe811@41 {
+		compatible = "st,stmpe811";
+		reg = <0x41>;
+		interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-parent = <&gpioa>;
+		/* 3.25 MHz ADC clock speed */
+		st,adc-freq = <1>;
+		/* 12-bit ADC */
+		st,mod-12b = <1>;
+		/* internal ADC reference */
+		st,ref-sel = <0>;
+		/* ADC converstion time: 80 clocks */
+		st,sample-time = <4>;
+
+		stmpe_touchscreen {
+			compatible = "st,stmpe-ts";
+			/* 8 sample average control */
+			st,ave-ctrl = <3>;
+			/* 7 length fractional part in z */
+			st,fraction-z = <7>;
+			/*
+			 * 50 mA typical 80 mA max touchscreen drivers
+			 * current limit value
+			 */
+			st,i-drive = <1>;
+			/* 1 ms panel driver settling time */
+			st,settling = <3>;
+			/* 5 ms touch detect interrupt delay */
+			st,touch-det-delay = <5>;
+		};
+
+		stmpe_adc {
+			compatible = "st,stmpe-adc";
+			/* forbid to use ADC channels 3-0 (touch) */
+			st,norequest-mask = <0x0F>;
+		};
+	};
+};
+
+&ltdc {
+	status = "okay";
+	pinctrl-0 = <&ltdc_pins_b>;
+	pinctrl-names = "default";
+
+	port {
+		ltdc_out_rgb: endpoint {
+			remote-endpoint = <&panel_in_rgb>;
+		};
+	};
+};
+
 &rtc {
 	assigned-clocks = <&rcc 1 CLK_RTC>;
 	assigned-clock-parents = <&rcc 1 CLK_LSI>;
 	status = "okay";
 };
 
+&spi5 {
+	status = "okay";
+	pinctrl-0 = <&spi5_pins>;
+	pinctrl-names = "default";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cs-gpios = <&gpioc 1 GPIO_ACTIVE_LOW>, <&gpioc 2 GPIO_ACTIVE_LOW>;
+
+	l3gd20: l3gd20@0 {
+		compatible = "st,l3gd20-gyro";
+		spi-max-frequency = <10000000>;
+		st,drdy-int-pin = <2>;
+		interrupt-parent = <&gpioa>;
+		interrupts = <1 IRQ_TYPE_EDGE_RISING>,
+				<2 IRQ_TYPE_EDGE_RISING>;
+		reg = <0>;
+		status = "okay";
+	};
+
+	display: display@1{
+		/* Connect panel-ilitek-9341 to ltdc */
+		compatible = "st,sf-tc240t-9370-t";
+		reg = <1>;
+		spi-3wire;
+		spi-max-frequency = <10000000>;
+		dc-gpios = <&gpiod 13 0>;
+		port {
+			panel_in_rgb: endpoint {
+			remote-endpoint = <&ltdc_out_rgb>;
+			};
+		};
+	};
+};
+
 &usart1 {
 	pinctrl-0 = <&usart1_pins_a>;
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index 393f43c85a3c..ad715a0e1c9a 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -322,7 +322,6 @@
 			assigned-clock-parents = <&rcc 1 CLK_LSE>;
 			interrupt-parent = <&exti>;
 			interrupts = <17 1>;
-			interrupt-names = "alarm";
 			st,syscfg = <&pwrcfg 0x00 0x100>;
 			status = "disabled";
 		};
@@ -402,6 +401,18 @@
 			status = "disabled";
 		};
 
+		i2c3: i2c@40005c00 {
+			compatible = "st,stm32f4-i2c";
+			reg = <0x40005c00 0x400>;
+			interrupts = <72>,
+				     <73>;
+			resets = <&rcc STM32F4_APB1_RESET(I2C3)>;
+			clocks = <&rcc 0 STM32F4_APB1_CLOCK(I2C3)>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		dac: dac@40007400 {
 			compatible = "st,stm32f4-dac-core";
 			reg = <0x40007400 0x400>;
@@ -586,8 +597,8 @@
 			status = "disabled";
 		};
 
-		syscfg: system-config@40013800 {
-			compatible = "syscon";
+		syscfg: syscon@40013800 {
+			compatible = "st,stm32-syscfg", "syscon";
 			reg = <0x40013800 0x400>;
 		};
 
@@ -660,6 +671,9 @@
 			reg = <0x40015000 0x400>;
 			interrupts = <85>;
 			clocks = <&rcc 0 STM32F4_APB2_CLOCK(SPI5)>;
+			dmas = <&dma2 3 2 0x400 0x0>,
+				<&dma2 4 2 0x400 0x0>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -674,7 +688,7 @@
 		};
 
 		pwrcfg: power-config@40007000 {
-			compatible = "syscon";
+			compatible = "st,stm32-power-config", "syscon";
 			reg = <0x40007000 0x400>;
 		};
 
diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts
index 9397db0c43de..2e1b3bbbe4b5 100644
--- a/arch/arm/boot/dts/stm32f469-disco.dts
+++ b/arch/arm/boot/dts/stm32f469-disco.dts
@@ -89,17 +89,17 @@
 
 	leds {
 		compatible = "gpio-leds";
-		green {
+		led-green {
 			gpios = <&gpiog 6 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
 		};
-		orange {
+		led-orange {
 			gpios = <&gpiod 4 GPIO_ACTIVE_LOW>;
 		};
-		red {
+		led-red {
 			gpios = <&gpiod 5 GPIO_ACTIVE_LOW>;
 		};
-		blue {
+		led-blue {
 			gpios = <&gpiok 3 GPIO_ACTIVE_LOW>;
 		};
 	};
diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi
index 93c063796780..640ff54ed00c 100644
--- a/arch/arm/boot/dts/stm32f746.dtsi
+++ b/arch/arm/boot/dts/stm32f746.dtsi
@@ -304,7 +304,6 @@
 			assigned-clock-parents = <&rcc 1 CLK_LSE>;
 			interrupt-parent = <&exti>;
 			interrupts = <17 1>;
-			interrupt-names = "alarm";
 			st,syscfg = <&pwrcfg 0x00 0x100>;
 			status = "disabled";
 		};
@@ -496,8 +495,8 @@
 			status = "disabled";
 		};
 
-		syscfg: system-config@40013800 {
-			compatible = "syscon";
+		syscfg: syscon@40013800 {
+			compatible = "st,stm32-syscfg", "syscon";
 			reg = <0x40013800 0x400>;
 		};
 
@@ -564,7 +563,7 @@
 		};
 
 		pwrcfg: power-config@40007000 {
-			compatible = "syscon";
+			compatible = "st,stm32-power-config", "syscon";
 			reg = <0x40007000 0x400>;
 		};
 
diff --git a/arch/arm/boot/dts/stm32f769-disco.dts b/arch/arm/boot/dts/stm32f769-disco.dts
index 1626e00bb2cb..0ce7fbc20fa4 100644
--- a/arch/arm/boot/dts/stm32f769-disco.dts
+++ b/arch/arm/boot/dts/stm32f769-disco.dts
@@ -66,11 +66,11 @@
 
 	leds {
 		compatible = "gpio-leds";
-		green {
+		led-green {
 			gpios = <&gpioj 5 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
-		red {
+		led-red {
 			gpios = <&gpioj 13 GPIO_ACTIVE_HIGH>;
 		};
 	};
diff --git a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi
index e44e7baa3f17..fa5dcb6a5fdd 100644
--- a/arch/arm/boot/dts/stm32h743-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32h743-pinctrl.dtsi
@@ -163,7 +163,7 @@
 				#interrupt-cells = <2>;
 			};
 
-			i2c1_pins_a: i2c1@0 {
+			i2c1_pins_a: i2c1-0 {
 				pins {
 					pinmux = <STM32_PINMUX('B', 6, AF4)>, /* I2C1_SCL */
 						 <STM32_PINMUX('B', 7, AF4)>; /* I2C1_SDA */
@@ -173,7 +173,7 @@
 				};
 			};
 
-			ethernet_rmii: rmii@0 {
+			ethernet_rmii: rmii-0 {
 				pins {
 					pinmux = <STM32_PINMUX('G', 11, AF11)>,
 						 <STM32_PINMUX('G', 13, AF11)>,
@@ -256,7 +256,7 @@
 				};
 			};
 
-			usart1_pins: usart1@0 {
+			usart1_pins: usart1-0 {
 				pins1 {
 					pinmux = <STM32_PINMUX('B', 14, AF4)>; /* USART1_TX */
 					bias-disable;
@@ -269,7 +269,7 @@
 				};
 			};
 
-			usart2_pins: usart2@0 {
+			usart2_pins: usart2-0 {
 				pins1 {
 					pinmux = <STM32_PINMUX('D', 5, AF7)>; /* USART2_TX */
 					bias-disable;
@@ -282,7 +282,7 @@
 				};
 			};
 
-			usbotg_hs_pins_a: usbotg-hs@0 {
+			usbotg_hs_pins_a: usbotg-hs-0 {
 				pins {
 					pinmux = <STM32_PINMUX('H', 4, AF10)>,	/* ULPI_NXT */
 							 <STM32_PINMUX('I', 11, AF10)>, /* ULPI_DIR> */
diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi
index 9b7fc68380e9..69e2f1e78ed6 100644
--- a/arch/arm/boot/dts/stm32h743.dtsi
+++ b/arch/arm/boot/dts/stm32h743.dtsi
@@ -361,8 +361,8 @@
 			interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <62>, <76>;
 		};
 
-		syscfg: system-config@58000400 {
-			compatible = "syscon";
+		syscfg: syscon@58000400 {
+			compatible = "st,stm32-syscfg", "syscon";
 			reg = <0x58000400 0x400>;
 		};
 
@@ -487,7 +487,6 @@
 			assigned-clock-parents = <&rcc LSE_CK>;
 			interrupt-parent = <&exti>;
 			interrupts = <17 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "alarm";
 			st,syscfg = <&pwrcfg 0x00 0x100>;
 			status = "disabled";
 		};
@@ -502,7 +501,7 @@
 		};
 
 		pwrcfg: power-config@58024800 {
-			compatible = "syscon";
+			compatible = "st,stm32-power-config", "syscon";
 			reg = <0x58024800 0x400>;
 		};
 
diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
index 7eb858732d6d..b5a66429670c 100644
--- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
@@ -210,8 +210,8 @@
 				 <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */
 				 <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */
 				 <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */
-			         <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */
-			         <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */
+				 <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */
 				 <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */
 				 <STM32_PINMUX('H', 6, ANALOG)>, /* ETH_RGMII_RXD2 */
 				 <STM32_PINMUX('H', 7, ANALOG)>, /* ETH_RGMII_RXD3 */
@@ -453,7 +453,7 @@
 	i2c5_pins_b: i2c5-1 {
 		pins {
 			pinmux = <STM32_PINMUX('D', 0, AF4)>, /* I2C5_SCL */
-			         <STM32_PINMUX('D', 1, AF4)>; /* I2C5_SDA */
+				 <STM32_PINMUX('D', 1, AF4)>; /* I2C5_SDA */
 			bias-disable;
 			drive-open-drain;
 			slew-rate = <0>;
@@ -463,7 +463,7 @@
 	i2c5_sleep_pins_b: i2c5-sleep-1 {
 		pins {
 			pinmux = <STM32_PINMUX('D', 0, ANALOG)>, /* I2C5_SCL */
-			         <STM32_PINMUX('D', 1, ANALOG)>; /* I2C5_SDA */
+				 <STM32_PINMUX('D', 1, ANALOG)>; /* I2C5_SDA */
 		};
 	};
 
@@ -1072,7 +1072,6 @@
 		};
 	};
 
-
 	sai2a_pins_b: sai2a-1 {
 		pins1 {
 			pinmux = <STM32_PINMUX('I', 6, AF10)>,	/* SAI2_SD_A */
@@ -1574,6 +1573,147 @@
 		};
 	};
 
+	uart4_pins_a: uart4-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+			bias-disable;
+		};
+	};
+
+	uart4_idle_pins_a: uart4-idle-0 {
+		   pins1 {
+			 pinmux = <STM32_PINMUX('G', 11, ANALOG)>; /* UART4_TX */
+		   };
+		   pins2 {
+			 pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+			 bias-disable;
+		   };
+	};
+
+	uart4_sleep_pins_a: uart4-sleep-0 {
+		   pins {
+			pinmux = <STM32_PINMUX('G', 11, ANALOG)>, /* UART4_TX */
+				 <STM32_PINMUX('B', 2, ANALOG)>; /* UART4_RX */
+		    };
+	};
+
+	uart4_pins_b: uart4-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('D', 1, AF8)>; /* UART4_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+			bias-disable;
+		};
+	};
+
+	uart4_pins_c: uart4-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+			bias-disable;
+		};
+	};
+
+	uart7_pins_a: uart7-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART7_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 7, AF7)>, /* UART7_RX */
+				 <STM32_PINMUX('E', 10, AF7)>, /* UART7_CTS */
+				 <STM32_PINMUX('E', 9, AF7)>; /* UART7_RTS */
+			bias-disable;
+		};
+	};
+
+	uart7_pins_b: uart7-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 7, AF7)>; /* UART7_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('F', 6, AF7)>; /* UART7_RX */
+			bias-disable;
+		};
+	};
+
+	uart7_pins_c: uart7-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART7_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 7, AF7)>; /* UART7_RX */
+			bias-disable;
+		};
+	};
+
+	uart7_idle_pins_c: uart7-idle-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('E', 8, ANALOG)>; /* UART7_TX */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 7, AF7)>; /* UART7_RX */
+			bias-disable;
+		};
+	};
+
+	uart7_sleep_pins_c: uart7-sleep-2 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 8, ANALOG)>, /* UART7_TX */
+				 <STM32_PINMUX('E', 7, ANALOG)>; /* UART7_RX */
+		};
+	};
+
+	uart8_pins_a: uart8-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('E', 1, AF8)>; /* UART8_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 0, AF8)>; /* UART8_RX */
+			bias-disable;
+		};
+	};
+
+	spi4_pins_a: spi4-0 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 12, AF5)>, /* SPI4_SCK */
+				 <STM32_PINMUX('E', 6, AF5)>;  /* SPI4_MOSI */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 13, AF5)>; /* SPI4_MISO */
+			bias-disable;
+		};
+	};
+
 	usart2_pins_a: usart2-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('F', 5, AF7)>, /* USART2_TX */
@@ -1622,99 +1762,127 @@
 		};
 	};
 
-	usart3_pins_a: usart3-0 {
+	usart2_pins_c: usart2-2 {
 		pins1 {
-			pinmux = <STM32_PINMUX('B', 10, AF7)>; /* USART3_TX */
+			pinmux = <STM32_PINMUX('D', 5, AF7)>, /* USART2_TX */
+				 <STM32_PINMUX('D', 4, AF7)>; /* USART2_RTS */
 			bias-disable;
 			drive-push-pull;
-			slew-rate = <0>;
+			slew-rate = <3>;
 		};
 		pins2 {
-			pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
+			pinmux = <STM32_PINMUX('D', 6, AF7)>, /* USART2_RX */
+				 <STM32_PINMUX('D', 3, AF7)>; /* USART2_CTS_NSS */
 			bias-disable;
 		};
 	};
 
-	uart4_pins_a: uart4-0 {
+	usart2_idle_pins_c: usart2-idle-2 {
 		pins1 {
-			pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <0>;
+			pinmux = <STM32_PINMUX('D', 5, ANALOG)>, /* USART2_TX */
+				 <STM32_PINMUX('D', 4, ANALOG)>, /* USART2_RTS */
+				 <STM32_PINMUX('D', 3, ANALOG)>; /* USART2_CTS_NSS */
 		};
 		pins2 {
-			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+			pinmux = <STM32_PINMUX('D', 6, AF7)>; /* USART2_RX */
 			bias-disable;
 		};
 	};
 
-	uart4_pins_b: uart4-1 {
+	usart2_sleep_pins_c: usart2-sleep-2 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 5, ANALOG)>, /* USART2_TX */
+				 <STM32_PINMUX('D', 4, ANALOG)>, /* USART2_RTS */
+				 <STM32_PINMUX('D', 6, ANALOG)>, /* USART2_RX */
+				 <STM32_PINMUX('D', 3, ANALOG)>; /* USART2_CTS_NSS */
+		};
+	};
+
+	usart3_pins_a: usart3-0 {
 		pins1 {
-			pinmux = <STM32_PINMUX('D', 1, AF8)>; /* UART4_TX */
+			pinmux = <STM32_PINMUX('B', 10, AF7)>; /* USART3_TX */
 			bias-disable;
 			drive-push-pull;
 			slew-rate = <0>;
 		};
 		pins2 {
-			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+			pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
 			bias-disable;
 		};
 	};
 
-	uart4_pins_c: uart4-2 {
+	usart3_pins_b: usart3-1 {
 		pins1 {
-			pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
+			pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
+				 <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
 			bias-disable;
 			drive-push-pull;
 			slew-rate = <0>;
 		};
 		pins2 {
-			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+			pinmux = <STM32_PINMUX('B', 12, AF8)>, /* USART3_RX */
+				 <STM32_PINMUX('I', 10, AF8)>; /* USART3_CTS_NSS */
 			bias-disable;
 		};
 	};
 
-	uart7_pins_a: uart7-0 {
+	usart3_idle_pins_b: usart3-idle-1 {
 		pins1 {
-			pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART4_TX */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <0>;
+			pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
+				 <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
+				 <STM32_PINMUX('I', 10, ANALOG)>; /* USART3_CTS_NSS */
 		};
 		pins2 {
-			pinmux = <STM32_PINMUX('E', 7, AF7)>, /* UART4_RX */
-				 <STM32_PINMUX('E', 10, AF7)>, /* UART4_CTS */
-				 <STM32_PINMUX('E', 9, AF7)>; /* UART4_RTS */
+			pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
 			bias-disable;
 		};
 	};
 
-	uart7_pins_b: uart7-1 {
+	usart3_sleep_pins_b: usart3-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
+				 <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
+				 <STM32_PINMUX('I', 10, ANALOG)>, /* USART3_CTS_NSS */
+				 <STM32_PINMUX('B', 12, ANALOG)>; /* USART3_RX */
+		};
+	};
+
+	usart3_pins_c: usart3-2 {
 		pins1 {
-			pinmux = <STM32_PINMUX('F', 7, AF7)>; /* UART7_TX */
+			pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
+				 <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
 			bias-disable;
 			drive-push-pull;
 			slew-rate = <0>;
 		};
 		pins2 {
-			pinmux = <STM32_PINMUX('F', 6, AF7)>; /* UART7_RX */
+			pinmux = <STM32_PINMUX('B', 12, AF8)>, /* USART3_RX */
+				 <STM32_PINMUX('B', 13, AF7)>; /* USART3_CTS_NSS */
 			bias-disable;
 		};
 	};
 
-	uart8_pins_a: uart8-0 {
+	usart3_idle_pins_c: usart3-idle-2 {
 		pins1 {
-			pinmux = <STM32_PINMUX('E', 1, AF8)>; /* UART8_TX */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <0>;
+			pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
+				 <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
+				 <STM32_PINMUX('B', 13, ANALOG)>; /* USART3_CTS_NSS */
 		};
 		pins2 {
-			pinmux = <STM32_PINMUX('E', 0, AF8)>; /* UART8_RX */
+			pinmux = <STM32_PINMUX('B', 12, AF8)>; /* USART3_RX */
 			bias-disable;
 		};
 	};
 
+	usart3_sleep_pins_c: usart3-sleep-2 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
+				 <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
+				 <STM32_PINMUX('B', 13, ANALOG)>, /* USART3_CTS_NSS */
+				 <STM32_PINMUX('B', 12, ANALOG)>; /* USART3_RX */
+		};
+	};
+
 	usbotg_hs_pins_a: usbotg-hs-0 {
 		pins {
 			pinmux = <STM32_PINMUX('A', 10, ANALOG)>; /* OTG_ID */
@@ -1776,18 +1944,4 @@
 			bias-disable;
 		};
 	};
-
-	spi4_pins_a: spi4-0 {
-		pins {
-			pinmux = <STM32_PINMUX('E', 12, AF5)>, /* SPI4_SCK */
-				 <STM32_PINMUX('E', 6, AF5)>;  /* SPI4_MOSI */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <1>;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('E', 13, AF5)>; /* SPI4_MISO */
-			bias-disable;
-		};
-	};
 };
diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi
index 36f38a95b4de..bfe29023fbd5 100644
--- a/arch/arm/boot/dts/stm32mp151.dtsi
+++ b/arch/arm/boot/dts/stm32mp151.dtsi
@@ -1127,7 +1127,7 @@
 		};
 
 		pwr_mcu: pwr_mcu@50001014 {
-			compatible = "syscon";
+			compatible = "st,stm32mp151-pwr-mcu", "syscon";
 			reg = <0x50001014 0x4>;
 		};
 
@@ -1331,6 +1331,8 @@
 			dma-names = "tx", "rx";
 			clocks = <&rcc QSPI_K>;
 			resets = <&rcc QSPI_R>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/stm32mp157a-dk1.dts b/arch/arm/boot/dts/stm32mp157a-dk1.dts
index d03d4cd2606a..4c8be9c8eb20 100644
--- a/arch/arm/boot/dts/stm32mp157a-dk1.dts
+++ b/arch/arm/boot/dts/stm32mp157a-dk1.dts
@@ -18,6 +18,8 @@
 	aliases {
 		ethernet0 = &ethernet0;
 		serial0 = &uart4;
+		serial1 = &usart3;
+		serial2 = &uart7;
 	};
 
 	chosen {
diff --git a/arch/arm/boot/dts/stm32mp157c-dk2.dts b/arch/arm/boot/dts/stm32mp157c-dk2.dts
index 9a8a26710ac1..045636555ddd 100644
--- a/arch/arm/boot/dts/stm32mp157c-dk2.dts
+++ b/arch/arm/boot/dts/stm32mp157c-dk2.dts
@@ -19,6 +19,9 @@
 	aliases {
 		ethernet0 = &ethernet0;
 		serial0 = &uart4;
+		serial1 = &usart3;
+		serial2 = &uart7;
+		serial3 = &usart2;
 	};
 
 	chosen {
@@ -84,3 +87,11 @@
 		};
 	};
 };
+
+&usart2 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&usart2_pins_c>;
+	pinctrl-1 = <&usart2_sleep_pins_c>;
+	pinctrl-2 = <&usart2_idle_pins_c>;
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts
index 32ccd50b4144..ca109dc18238 100644
--- a/arch/arm/boot/dts/stm32mp157c-ed1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts
@@ -353,8 +353,10 @@
 };
 
 &uart4 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "sleep", "idle";
 	pinctrl-0 = <&uart4_pins_a>;
+	pinctrl-1 = <&uart4_sleep_pins_a>;
+	pinctrl-2 = <&uart4_idle_pins_a>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
index b19056557ef0..85628e16d2d5 100644
--- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -19,6 +19,7 @@
 
 	aliases {
 		serial0 = &uart4;
+		serial1 = &usart3;
 		ethernet0 = &ethernet0;
 	};
 
@@ -341,6 +342,20 @@
 	};
 };
 
+&usart3 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&usart3_pins_b>;
+	pinctrl-1 = <&usart3_sleep_pins_b>;
+	pinctrl-2 = <&usart3_idle_pins_b>;
+	/*
+	 * HW flow control USART3_RTS is optional, and isn't default wired to
+	 * the connector. SB23 needs to be soldered in order to use it, and R77
+	 * (ETH_CLK) should be removed.
+	 */
+	uart-has-rtscts;
+	status = "disabled";
+};
+
 &usbh_ehci {
 	phys = <&usbphyc_port0>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
index 70db923a45f7..a5307745719a 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
@@ -62,7 +62,7 @@
 
 	led {
 		compatible = "gpio-leds";
-		blue {
+		led-blue {
 			label = "heartbeat";
 			gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
@@ -365,6 +365,19 @@
 	};
 };
 
+&i2c5 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c5_pins_a>;
+	pinctrl-1 = <&i2c5_sleep_pins_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	clock-frequency = <400000>;
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "disabled";
+};
+
 &i2s2 {
 	clocks = <&rcc SPI2>, <&rcc SPI2_K>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
 	clock-names = "pclk", "i2sclk", "x8k", "x11k";
@@ -584,20 +597,39 @@
 };
 
 &uart4 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "sleep", "idle";
 	pinctrl-0 = <&uart4_pins_a>;
+	pinctrl-1 = <&uart4_sleep_pins_a>;
+	pinctrl-2 = <&uart4_idle_pins_a>;
 	status = "okay";
 };
 
+&uart7 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&uart7_pins_c>;
+	pinctrl-1 = <&uart7_sleep_pins_c>;
+	pinctrl-2 = <&uart7_idle_pins_c>;
+	status = "disabled";
+};
+
+&usart3 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&usart3_pins_c>;
+	pinctrl-1 = <&usart3_sleep_pins_c>;
+	pinctrl-2 = <&usart3_idle_pins_c>;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
 &usbh_ehci {
 	phys = <&usbphyc_port0>;
 	status = "okay";
 };
 
 &usbotg_hs {
-	dr_mode = "peripheral";
 	phys = <&usbphyc_port1 0>;
 	phy-names = "usb2-phy";
+	usb-role-switch;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index bf531efc0610..0f95a6ef8543 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -198,7 +198,7 @@
 		default-pool {
 			compatible = "shared-dma-pool";
 			size = <0x6000000>;
-			alloc-ranges = <0x4a000000 0x6000000>;
+			alloc-ranges = <0x40000000 0x10000000>;
 			reusable;
 			linux,cma-default;
 		};
diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi
index e6b036734a64..c2b4fbf552a3 100644
--- a/arch/arm/boot/dts/sun5i.dtsi
+++ b/arch/arm/boot/dts/sun5i.dtsi
@@ -117,7 +117,7 @@
 		default-pool {
 			compatible = "shared-dma-pool";
 			size = <0x6000000>;
-			alloc-ranges = <0x4a000000 0x6000000>;
+			alloc-ranges = <0x40000000 0x10000000>;
 			reusable;
 			linux,cma-default;
 		};
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index ffe1d10a1a84..6d6a37940db2 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -181,7 +181,7 @@
 		default-pool {
 			compatible = "shared-dma-pool";
 			size = <0x6000000>;
-			alloc-ranges = <0x4a000000 0x6000000>;
+			alloc-ranges = <0x40000000 0x10000000>;
 			reusable;
 			linux,cma-default;
 		};
diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts
index b8f46e2802fd..251bbab7d707 100644
--- a/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts
+++ b/arch/arm/boot/dts/sun8i-h3-orangepi-zero-plus2.dts
@@ -70,6 +70,21 @@
 		};
 	};
 
+	leds {
+		compatible = "gpio-leds";
+
+		pwr {
+			label = "orangepi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		status {
+			label = "orangepi:red:status";
+			gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
 	reg_vcc3v3: vcc3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc3v3";
@@ -88,6 +103,10 @@
 	status = "okay";
 };
 
+&ehci0 {
+	status = "okay";
+};
+
 &hdmi {
 	status = "okay";
 };
@@ -132,8 +151,27 @@
 	status = "okay";
 };
 
+&ohci0 {
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pa_pins>;
 	status = "okay";
 };
+
+&usb_otg {
+	/*
+	 * According to schematics CN1 MicroUSB port can be used to take
+	 * external 5V to power up the board VBUS. On the contrary CN1 MicroUSB
+	 * port cannot provide power externally even if the board is powered
+	 * via GPIO pins. It thus makes sense to force peripheral mode.
+	 */
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi b/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi
index 22466afd38a3..235994a4a2eb 100644
--- a/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi
+++ b/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi
@@ -16,15 +16,27 @@
 		regulator-type = "voltage";
 		regulator-boot-on;
 		regulator-always-on;
-		regulator-min-microvolt = <1100000>;
-		regulator-max-microvolt = <1300000>;
+		regulator-min-microvolt = <1108475>;
+		regulator-max-microvolt = <1308475>;
 		regulator-ramp-delay = <50>; /* 4ms */
 		gpios = <&r_pio 0 1 GPIO_ACTIVE_HIGH>; /* PL1 */
 		gpios-states = <0x1>;
-		states = <1100000 0>, <1300000 1>;
+		states = <1108475 0>, <1308475 1>;
 	};
 };
 
 &cpu0 {
 	cpu-supply = <&reg_vdd_cpux>;
 };
+
+&cpu1 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
diff --git a/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi b/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi
index 19b3b23cfaa8..c44fd726945a 100644
--- a/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi
+++ b/arch/arm/boot/dts/sunxi-libretech-all-h3-cc.dtsi
@@ -128,6 +128,18 @@
 	cpu-supply = <&reg_vdd_cpux>;
 };
 
+&cpu1 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu2 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+&cpu3 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
 &de {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
index 08be733ee2cd..c04162ddec3c 100644
--- a/arch/arm/boot/dts/tegra114-dalmore.dts
+++ b/arch/arm/boot/dts/tegra114-dalmore.dts
@@ -769,7 +769,6 @@
 		battery: smart-battery@b {
 			compatible = "ti,bq20z45", "sbs,sbs-battery";
 			reg = <0xb>;
-			battery-name = "battery";
 			sbs,i2c-retry-count = <2>;
 			sbs,poll-retry-count = <100>;
 			power-supplies = <&charger>;
@@ -1109,14 +1108,14 @@
 		};
 	};
 
-	sdhci@78000400 {
+	mmc@78000400 {
 		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
 		wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_HIGH>;
 		bus-width = <4>;
 		status = "okay";
 	};
 
-	sdhci@78000600 {
+	mmc@78000600 {
 		bus-width = <8>;
 		status = "okay";
 		non-removable;
@@ -1152,17 +1151,10 @@
 		default-brightness-level = <6>;
 	};
 
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
+	clk32k_in: clock@0 {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
 	};
 
 	gpio-keys {
@@ -1194,83 +1186,70 @@
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vdd_ac_bat_reg: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "vdd_ac_bat";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
+	vdd_ac_bat_reg: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_ac_bat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
 
-		dvdd_ts_reg: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "dvdd_ts";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(H, 5) GPIO_ACTIVE_HIGH>;
-		};
+	dvdd_ts_reg: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "dvdd_ts";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(H, 5) GPIO_ACTIVE_HIGH>;
+	};
 
-		usb1_vbus_reg: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
-			gpio-open-drain;
-			vin-supply = <&tps65090_dcdc1_reg>;
-		};
+	usb1_vbus_reg: regulator@3 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+		gpio-open-drain;
+		vin-supply = <&tps65090_dcdc1_reg>;
+	};
 
-		usb3_vbus_reg: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "usb2_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
-			gpio-open-drain;
-			vin-supply = <&tps65090_dcdc1_reg>;
-		};
+	usb3_vbus_reg: regulator@4 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb2_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
+		gpio-open-drain;
+		vin-supply = <&tps65090_dcdc1_reg>;
+	};
 
-		vdd_hdmi_reg: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			regulator-name = "vdd_hdmi_5v0";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			vin-supply = <&tps65090_dcdc1_reg>;
-		};
+	vdd_hdmi_reg: regulator@5 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_hdmi_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&tps65090_dcdc1_reg>;
+	};
 
-		vdd_cam_1v8_reg: regulator@6 {
-			compatible = "regulator-fixed";
-			reg = <6>;
-			regulator-name = "vdd_cam_1v8_reg";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			enable-active-high;
-			gpio = <&palmas_gpio 6 0>;
-		};
+	vdd_cam_1v8_reg: regulator@6 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_cam_1v8_reg";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		enable-active-high;
+		gpio = <&palmas_gpio 6 0>;
+	};
 
-		vdd_5v0_hdmi: regulator@7 {
-			compatible = "regulator-fixed";
-			reg = <7>;
-			regulator-name = "VDD_5V0_HDMI_CON";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&tps65090_dcdc1_reg>;
-		};
+	vdd_5v0_hdmi: regulator@7 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_5V0_HDMI_CON";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&tps65090_dcdc1_reg>;
 	};
 
 	sound {
diff --git a/arch/arm/boot/dts/tegra114-roth.dts b/arch/arm/boot/dts/tegra114-roth.dts
index 3d3835591cd2..07960171fabe 100644
--- a/arch/arm/boot/dts/tegra114-roth.dts
+++ b/arch/arm/boot/dts/tegra114-roth.dts
@@ -37,7 +37,7 @@
 		dsi@54300000 {
 			status = "okay";
 
-			vdd-supply = <&vdd_1v2_ap>;
+			avdd-dsi-csi-supply = <&vdd_1v2_ap>;
 
 			panel@0 {
 				compatible = "lg,lh500wx1-sd03";
@@ -962,7 +962,7 @@
 	};
 
 	/* SD card */
-	sdhci@78000400 {
+	mmc@78000400 {
 		status = "okay";
 		bus-width = <4>;
 		vqmmc-supply = <&vddio_sdmmc3>;
@@ -971,7 +971,7 @@
 	};
 
 	/* eMMC */
-	sdhci@78000600 {
+	mmc@78000600 {
 		status = "okay";
 		bus-width = <8>;
 		non-removable;
@@ -1016,17 +1016,10 @@
 		enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
 	};
 
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
+	clk32k_in: clock@0 {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
 	};
 
 	gpio-keys {
@@ -1052,76 +1045,64 @@
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		lcd_bl_en: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "lcd_bl_en";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-boot-on;
-		};
+	lcd_bl_en: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd_bl_en";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
 
-		vdd_lcd: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "vdd_lcd_1v8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			vin-supply = <&vdd_1v8>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
-			regulator-boot-on;
-		};
+	vdd_lcd: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_lcd_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vdd_1v8>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+	};
 
-		regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "vdd_1v8_ts";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			gpio = <&gpio TEGRA_GPIO(K, 3) GPIO_ACTIVE_LOW>;
-			regulator-boot-on;
-		};
+	regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v8_ts";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio TEGRA_GPIO(K, 3) GPIO_ACTIVE_LOW>;
+		regulator-boot-on;
+	};
 
-		regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "vdd_3v3_ts";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(H, 5) GPIO_ACTIVE_HIGH>;
-			regulator-boot-on;
-		};
+	regulator@3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_ts";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(H, 5) GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+	};
 
-		regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "vdd_1v8_com";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			vin-supply = <&vdd_1v8>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_HIGH>;
-			regulator-boot-on;
-		};
+	regulator@4 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v8_com";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vdd_1v8>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+	};
 
-		regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			regulator-name = "vdd_3v3_com";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			vin-supply = <&vdd_3v3_sys>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_HIGH>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
+	regulator@5 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_com";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vdd_3v3_sys>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+		regulator-boot-on;
 	};
 };
diff --git a/arch/arm/boot/dts/tegra114-tn7.dts b/arch/arm/boot/dts/tegra114-tn7.dts
index bfdd1bf61816..745d234b105b 100644
--- a/arch/arm/boot/dts/tegra114-tn7.dts
+++ b/arch/arm/boot/dts/tegra114-tn7.dts
@@ -37,7 +37,7 @@
 		dsi@54300000 {
 			status = "okay";
 
-			vdd-supply = <&vdd_1v2_ap>;
+			avdd-dsi-csi-supply = <&vdd_1v2_ap>;
 
 			panel@0 {
 				compatible = "lg,ld070wx3-sl01";
@@ -242,7 +242,7 @@
 	};
 
 	/* eMMC */
-	sdhci@78000600 {
+	mmc@78000600 {
 		status = "okay";
 		bus-width = <8>;
 		non-removable;
@@ -273,17 +273,10 @@
 		power-supply = <&lcd_bl_en>;
 	};
 
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
+	clk32k_in: clock@0 {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
 	};
 
 	gpio-keys {
@@ -309,44 +302,35 @@
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* FIXME: output of BQ24192 */
-		vs_sys: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "VS_SYS";
-			regulator-min-microvolt = <4200000>;
-			regulator-max-microvolt = <4200000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
+	/* FIXME: output of BQ24192 */
+	vs_sys: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VS_SYS";
+		regulator-min-microvolt = <4200000>;
+		regulator-max-microvolt = <4200000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
 
-		lcd_bl_en: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "VDD_LCD_BL";
-			regulator-min-microvolt = <16500000>;
-			regulator-max-microvolt = <16500000>;
-			gpio = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vs_sys>;
-			regulator-boot-on;
-		};
+	lcd_bl_en: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_LCD_BL";
+		regulator-min-microvolt = <16500000>;
+		regulator-max-microvolt = <16500000>;
+		gpio = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vs_sys>;
+		regulator-boot-on;
+	};
 
-		vdd_lcd: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "VD_LCD_1V8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			gpio = <&palmas_gpio 4 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_1v8>;
-			regulator-boot-on;
-		};
+	vdd_lcd: regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "VD_LCD_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&palmas_gpio 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_1v8>;
+		regulator-boot-on;
 	};
 };
diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi
index 450a1f1b12a0..fb99b3e971c3 100644
--- a/arch/arm/boot/dts/tegra114.dtsi
+++ b/arch/arm/boot/dts/tegra114.dtsi
@@ -18,11 +18,13 @@
 	};
 
 	host1x@50000000 {
-		compatible = "nvidia,tegra114-host1x", "simple-bus";
+		compatible = "nvidia,tegra114-host1x";
 		reg = <0x50000000 0x00028000>;
 		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
 			     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */
+		interrupt-names = "syncpt", "host1x";
 		clocks = <&tegra_car TEGRA114_CLK_HOST1X>;
+		clock-names = "host1x";
 		resets = <&tegra_car 28>;
 		reset-names = "host1x";
 		iommus = <&mc TEGRA_SWGROUP_HC>;
@@ -33,7 +35,7 @@
 		ranges = <0x54000000 0x54000000 0x01000000>;
 
 		gr2d@54140000 {
-			compatible = "nvidia,tegra114-gr2d", "nvidia,tegra20-gr2d";
+			compatible = "nvidia,tegra114-gr2d";
 			reg = <0x54140000 0x00040000>;
 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&tegra_car TEGRA114_CLK_GR2D>;
@@ -44,7 +46,7 @@
 		};
 
 		gr3d@54180000 {
-			compatible = "nvidia,tegra114-gr3d", "nvidia,tegra20-gr3d";
+			compatible = "nvidia,tegra114-gr3d";
 			reg = <0x54180000 0x00040000>;
 			clocks = <&tegra_car TEGRA114_CLK_GR3D>;
 			resets = <&tegra_car 24>;
@@ -54,7 +56,7 @@
 		};
 
 		dc@54200000 {
-			compatible = "nvidia,tegra114-dc", "nvidia,tegra20-dc";
+			compatible = "nvidia,tegra114-dc";
 			reg = <0x54200000 0x00040000>;
 			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&tegra_car TEGRA114_CLK_DISP1>,
@@ -73,7 +75,7 @@
 		};
 
 		dc@54240000 {
-			compatible = "nvidia,tegra114-dc", "nvidia,tegra20-dc";
+			compatible = "nvidia,tegra114-dc";
 			reg = <0x54240000 0x00040000>;
 			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&tegra_car TEGRA114_CLK_DISP2>,
@@ -253,14 +255,14 @@
 
 	apbmisc@70000800 {
 		compatible = "nvidia,tegra114-apbmisc", "nvidia,tegra20-apbmisc";
-		reg = <0x70000800 0x64   /* Chip revision */
-		       0x70000008 0x04>; /* Strapping options */
+		reg = <0x70000800 0x64>, /* Chip revision */
+		      <0x70000008 0x04>; /* Strapping options */
 	};
 
 	pinmux: pinmux@70000868 {
 		compatible = "nvidia,tegra114-pinmux";
-		reg = <0x70000868 0x148		/* Pad control registers */
-		       0x70003000 0x40c>;	/* Mux registers */
+		reg = <0x70000868 0x148>, /* Pad control registers */
+		      <0x70003000 0x40c>; /* Mux registers */
 	};
 
 	/*
@@ -644,41 +646,45 @@
 		#nvidia,mipi-calibrate-cells = <1>;
 	};
 
-	sdhci@78000000 {
-		compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci";
+	mmc@78000000 {
+		compatible = "nvidia,tegra114-sdhci";
 		reg = <0x78000000 0x200>;
 		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA114_CLK_SDMMC1>;
+		clock-names = "sdhci";
 		resets = <&tegra_car 14>;
 		reset-names = "sdhci";
 		status = "disabled";
 	};
 
-	sdhci@78000200 {
-		compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci";
+	mmc@78000200 {
+		compatible = "nvidia,tegra114-sdhci";
 		reg = <0x78000200 0x200>;
 		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA114_CLK_SDMMC2>;
+		clock-names = "sdhci";
 		resets = <&tegra_car 9>;
 		reset-names = "sdhci";
 		status = "disabled";
 	};
 
-	sdhci@78000400 {
-		compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci";
+	mmc@78000400 {
+		compatible = "nvidia,tegra114-sdhci";
 		reg = <0x78000400 0x200>;
 		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA114_CLK_SDMMC3>;
+		clock-names = "sdhci";
 		resets = <&tegra_car 69>;
 		reset-names = "sdhci";
 		status = "disabled";
 	};
 
-	sdhci@78000600 {
-		compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci";
+	mmc@78000600 {
+		compatible = "nvidia,tegra114-sdhci";
 		reg = <0x78000600 0x200>;
 		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA114_CLK_SDMMC4>;
+		clock-names = "sdhci";
 		resets = <&tegra_car 15>;
 		reset-names = "sdhci";
 		status = "disabled";
@@ -698,7 +704,8 @@
 
 	phy1: usb-phy@7d000000 {
 		compatible = "nvidia,tegra114-usb-phy", "nvidia,tegra30-usb-phy";
-		reg = <0x7d000000 0x4000 0x7d000000 0x4000>;
+		reg = <0x7d000000 0x4000>,
+		      <0x7d000000 0x4000>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA114_CLK_USBD>,
 			 <&tegra_car TEGRA114_CLK_PLL_U>,
@@ -706,6 +713,7 @@
 		clock-names = "reg", "pll_u", "utmi-pads";
 		resets = <&tegra_car 22>, <&tegra_car 22>;
 		reset-names = "usb", "utmi-pads";
+		#phy-cells = <0>;
 		nvidia,hssync-start-delay = <0>;
 		nvidia,idle-wait-delay = <17>;
 		nvidia,elastic-limit = <16>;
@@ -734,7 +742,8 @@
 
 	phy3: usb-phy@7d008000 {
 		compatible = "nvidia,tegra114-usb-phy", "nvidia,tegra30-usb-phy";
-		reg = <0x7d008000 0x4000 0x7d000000 0x4000>;
+		reg = <0x7d008000 0x4000>,
+		      <0x7d000000 0x4000>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA114_CLK_USB3>,
 			 <&tegra_car TEGRA114_CLK_PLL_U>,
@@ -742,6 +751,7 @@
 		clock-names = "reg", "pll_u", "utmi-pads";
 		resets = <&tegra_car 59>, <&tegra_car 22>;
 		reset-names = "usb", "utmi-pads";
+		#phy-cells = <0>;
 		nvidia,hssync-start-delay = <0>;
 		nvidia,idle-wait-delay = <17>;
 		nvidia,elastic-limit = <16>;
diff --git a/arch/arm/boot/dts/tegra124-apalis-eval.dts b/arch/arm/boot/dts/tegra124-apalis-eval.dts
index ceb3f6388c7d..28c29b6813a7 100644
--- a/arch/arm/boot/dts/tegra124-apalis-eval.dts
+++ b/arch/arm/boot/dts/tegra124-apalis-eval.dts
@@ -130,7 +130,7 @@
 	};
 
 	/* Apalis MMC1 */
-	sdhci@700b0000 {
+	mmc@700b0000 {
 		status = "okay";
 		bus-width = <4>;
 		/* MMC1_CD# */
@@ -139,7 +139,7 @@
 	};
 
 	/* Apalis SD1 */
-	sdhci@700b0400 {
+	mmc@700b0400 {
 		status = "okay";
 		bus-width = <4>;
 		/* SD1_CD# */
diff --git a/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts b/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts
index 826b776fbe6f..f3afde410615 100644
--- a/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts
+++ b/arch/arm/boot/dts/tegra124-apalis-v1.2-eval.dts
@@ -132,7 +132,7 @@
 	};
 
 	/* Apalis MMC1 */
-	sdhci@700b0000 {
+	mmc@700b0000 {
 		status = "okay";
 		bus-width = <4>;
 		/* MMC1_CD# */
@@ -141,7 +141,7 @@
 	};
 
 	/* Apalis SD1 */
-	sdhci@700b0400 {
+	mmc@700b0400 {
 		status = "okay";
 		bus-width = <4>;
 		/* SD1_CD# */
diff --git a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
index de499f736bda..1e30fa405fa0 100644
--- a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
+++ b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
@@ -40,7 +40,7 @@
 			phy-names = "pcie-0";
 			status = "okay";
 
-			pcie@0 {
+			ethernet@0,0 {
 				reg = <0 0 0 0 0>;
 				local-mac-address = [00 00 00 00 00 00];
 			};
@@ -1562,6 +1562,7 @@
 		sgtl5000: codec@a {
 			compatible = "fsl,sgtl5000";
 			reg = <0x0a>;
+			#sound-dai-cells = <0>;
 			VDDA-supply = <&reg_module_3v3_audio>;
 			VDDD-supply = <&reg_1v8_vddio>;
 			VDDIO-supply = <&reg_1v8_vddio>;
@@ -1916,7 +1917,7 @@
 	};
 
 	/* eMMC */
-	sdhci@700b0600 {
+	mmc@700b0600 {
 		status = "okay";
 		bus-width = <8>;
 		non-removable;
diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi b/arch/arm/boot/dts/tegra124-apalis.dtsi
index d70a86da4ee4..608896f8dd52 100644
--- a/arch/arm/boot/dts/tegra124-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra124-apalis.dtsi
@@ -39,7 +39,7 @@
 			phy-names = "pcie-0";
 			status = "okay";
 
-			pcie@0 {
+			ethernet@0,0 {
 				reg = <0 0 0 0 0>;
 				local-mac-address = [00 00 00 00 00 00];
 			};
@@ -1555,6 +1555,7 @@
 		sgtl5000: codec@a {
 			compatible = "fsl,sgtl5000";
 			reg = <0x0a>;
+			#sound-dai-cells = <0>;
 			VDDA-supply = <&reg_module_3v3_audio>;
 			VDDD-supply = <&reg_1v8_vddio>;
 			VDDIO-supply = <&reg_1v8_vddio>;
@@ -1908,7 +1909,7 @@
 	};
 
 	/* eMMC */
-	sdhci@700b0600 {
+	mmc@700b0600 {
 		status = "okay";
 		bus-width = <8>;
 		non-removable;
diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
index 1b567e2d5ce0..414cd1cafa7f 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
@@ -1782,6 +1782,12 @@
 		};
 
 		ports {
+			/* Micro A/B */
+			usb2-0 {
+				status = "okay";
+				mode = "host";
+			};
+
 			/* Mini PCIe */
 			usb2-1 {
 				status = "okay";
@@ -1804,7 +1810,7 @@
 	};
 
 	/* SD card */
-	sdhci@700b0400 {
+	mmc@700b0400 {
 		status = "okay";
 		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
 		power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
@@ -1814,7 +1820,7 @@
 	};
 
 	/* eMMC */
-	sdhci@700b0600 {
+	mmc@700b0600 {
 		status = "okay";
 		bus-width = <8>;
 		non-removable;
@@ -1862,17 +1868,10 @@
 		vbus-supply = <&vdd_usb3_vbus>;
 	};
 
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
+	clk32k_in: clock@0 {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
 	};
 
 	cpus {
@@ -1893,145 +1892,127 @@
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vdd_mux: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "+VDD_MUX";
-			regulator-min-microvolt = <12000000>;
-			regulator-max-microvolt = <12000000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
+	vdd_mux: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "+VDD_MUX";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
 
-		vdd_5v0_sys: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "+5V_SYS";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-			regulator-boot-on;
-			vin-supply = <&vdd_mux>;
-		};
+	vdd_5v0_sys: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_SYS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd_mux>;
+	};
 
-		vdd_3v3_sys: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "+3.3V_SYS";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-			regulator-boot-on;
-			vin-supply = <&vdd_mux>;
-		};
+	vdd_3v3_sys: regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_SYS";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd_mux>;
+	};
 
-		vdd_3v3_run: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "+3.3V_RUN";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_3v3_sys>;
-		};
+	vdd_3v3_run: regulator@3 {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_RUN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
 
-		vdd_3v3_hdmi: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			vin-supply = <&vdd_3v3_run>;
-		};
+	vdd_3v3_hdmi: regulator@4 {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vdd_3v3_run>;
+	};
 
-		vdd_usb1_vbus: regulator@7 {
-			compatible = "regulator-fixed";
-			reg = <7>;
-			regulator-name = "+USB0_VBUS_SW";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			gpio-open-drain;
-			vin-supply = <&vdd_5v0_sys>;
-		};
+	vdd_usb1_vbus: regulator@5 {
+		compatible = "regulator-fixed";
+		regulator-name = "+USB0_VBUS_SW";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		gpio-open-drain;
+		vin-supply = <&vdd_5v0_sys>;
+	};
 
-		vdd_usb3_vbus: regulator@8 {
-			compatible = "regulator-fixed";
-			reg = <8>;
-			regulator-name = "+5V_USB_HS";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			gpio-open-drain;
-			vin-supply = <&vdd_5v0_sys>;
-		};
+	vdd_usb3_vbus: regulator@6 {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_USB_HS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		gpio-open-drain;
+		vin-supply = <&vdd_5v0_sys>;
+	};
 
-		vdd_3v3_lp0: regulator@10 {
-			compatible = "regulator-fixed";
-			reg = <10>;
-			regulator-name = "+3.3V_LP0";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_3v3_sys>;
-		};
+	vdd_3v3_lp0: regulator@7 {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_LP0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
 
-		vdd_hdmi_pll: regulator@11 {
-			compatible = "regulator-fixed";
-			reg = <11>;
-			regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
-			regulator-min-microvolt = <1050000>;
-			regulator-max-microvolt = <1050000>;
-			gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
-			vin-supply = <&vdd_1v05_run>;
-		};
+	vdd_hdmi_pll: regulator@8 {
+		compatible = "regulator-fixed";
+		regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1050000>;
+		gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+		vin-supply = <&vdd_1v05_run>;
+	};
 
-		vdd_5v0_hdmi: regulator@12 {
-			compatible = "regulator-fixed";
-			reg = <12>;
-			regulator-name = "+5V_HDMI_CON";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_5v0_sys>;
-		};
+	vdd_5v0_hdmi: regulator@9 {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_HDMI_CON";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
 
-		/* Molex power connector */
-		vdd_5v0_sata: regulator@13 {
-			compatible = "regulator-fixed";
-			reg = <13>;
-			regulator-name = "+5V_SATA";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio TEGRA_GPIO(EE, 2) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_5v0_sys>;
-		};
+	/* Molex power connector */
+	vdd_5v0_sata: regulator@10 {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_SATA";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(EE, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
 
-		vdd_12v0_sata: regulator@14 {
-			compatible = "regulator-fixed";
-			reg = <14>;
-			regulator-name = "+12V_SATA";
-			regulator-min-microvolt = <12000000>;
-			regulator-max-microvolt = <12000000>;
-			gpio = <&gpio TEGRA_GPIO(EE, 2) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_mux>;
-		};
+	vdd_12v0_sata: regulator@11 {
+		compatible = "regulator-fixed";
+		regulator-name = "+12V_SATA";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&gpio TEGRA_GPIO(EE, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_mux>;
 	};
 
 	sound {
diff --git a/arch/arm/boot/dts/tegra124-nyan-big.dts b/arch/arm/boot/dts/tegra124-nyan-big.dts
index d97791b98958..1d2aac2cb6d0 100644
--- a/arch/arm/boot/dts/tegra124-nyan-big.dts
+++ b/arch/arm/boot/dts/tegra124-nyan-big.dts
@@ -16,11 +16,12 @@
 	panel: panel {
 		compatible = "auo,b133xtn01";
 
+		power-supply = <&vdd_3v3_panel>;
 		backlight = <&backlight>;
 		ddc-i2c-bus = <&dpaux>;
 	};
 
-	sdhci@700b0400 { /* SD Card on this bus */
+	mmc@700b0400 { /* SD Card on this bus */
 		wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
 	};
 
diff --git a/arch/arm/boot/dts/tegra124-nyan-blaze.dts b/arch/arm/boot/dts/tegra124-nyan-blaze.dts
index 2a029ee86dd7..677babde6460 100644
--- a/arch/arm/boot/dts/tegra124-nyan-blaze.dts
+++ b/arch/arm/boot/dts/tegra124-nyan-blaze.dts
@@ -18,6 +18,7 @@
 	panel: panel {
 		compatible = "samsung,ltn140at29-301";
 
+		power-supply = <&vdd_3v3_panel>;
 		backlight = <&backlight>;
 		ddc-i2c-bus = <&dpaux>;
 	};
diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi
index 9b1af50cd4b8..5f71add38dfe 100644
--- a/arch/arm/boot/dts/tegra124-nyan.dtsi
+++ b/arch/arm/boot/dts/tegra124-nyan.dtsi
@@ -48,6 +48,9 @@
 		sor@54540000 {
 			status = "okay";
 
+			avdd-io-hdmi-dp-supply = <&vdd_3v3_hdmi>;
+			vdd-hdmi-dp-pll-supply = <&vdd_hdmi_pll>;
+
 			nvidia,dpaux = <&dpaux>;
 			nvidia,panel = <&panel>;
 		};
@@ -495,7 +498,7 @@
 		reset-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
 	};
 
-	sdhci@700b0000 { /* WiFi/BT on this bus */
+	mmc@700b0000 { /* WiFi/BT on this bus */
 		status = "okay";
 		bus-width = <4>;
 		no-1-8-v;
@@ -506,7 +509,7 @@
 		keep-power-in-suspend;
 	};
 
-	sdhci@700b0400 { /* SD Card on this bus */
+	mmc@700b0400 { /* SD Card on this bus */
 		status = "okay";
 		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
 		power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
@@ -515,7 +518,7 @@
 		vqmmc-supply = <&vddio_sdmmc3>;
 	};
 
-	sdhci@700b0600 { /* eMMC on this bus */
+	mmc@700b0600 { /* eMMC on this bus */
 		status = "okay";
 		bus-width = <8>;
 		no-1-8-v;
@@ -579,17 +582,10 @@
 			 256>;
 	};
 
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
+	clk32k_in: clock@0 {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
 	};
 
 	cpus {
@@ -619,157 +615,138 @@
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vdd_mux: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "+VDD_MUX";
-			regulator-min-microvolt = <12000000>;
-			regulator-max-microvolt = <12000000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
+	vdd_mux: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "+VDD_MUX";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
 
-		vdd_5v0_sys: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "+5V_SYS";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-			regulator-boot-on;
-			vin-supply = <&vdd_mux>;
-		};
+	vdd_5v0_sys: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_SYS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd_mux>;
+	};
 
-		vdd_3v3_sys: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "+3.3V_SYS";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-			regulator-boot-on;
-			vin-supply = <&vdd_mux>;
-		};
+	vdd_3v3_sys: regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_SYS";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd_mux>;
+	};
 
-		vdd_3v3_run: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "+3.3V_RUN";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_3v3_sys>;
-		};
+	vdd_3v3_run: regulator@3 {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_RUN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
 
-		vdd_3v3_hdmi: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			vin-supply = <&vdd_3v3_run>;
-		};
+	vdd_3v3_hdmi: regulator@4 {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vdd_3v3_run>;
+	};
 
-		vdd_led: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			regulator-name = "+VDD_LED";
-			gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_mux>;
-		};
+	vdd_led: regulator@5 {
+		compatible = "regulator-fixed";
+		regulator-name = "+VDD_LED";
+		gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_mux>;
+	};
 
-		vdd_5v0_ts: regulator@6 {
-			compatible = "regulator-fixed";
-			reg = <6>;
-			regulator-name = "+5V_VDD_TS_SW";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-boot-on;
-			gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_5v0_sys>;
-		};
+	vdd_5v0_ts: regulator@6 {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_VDD_TS_SW";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
 
-		vdd_usb1_vbus: regulator@7 {
-			compatible = "regulator-fixed";
-			reg = <7>;
-			regulator-name = "+5V_USB_HS";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			gpio-open-drain;
-			vin-supply = <&vdd_5v0_sys>;
-		};
+	vdd_usb1_vbus: regulator@7 {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_USB_HS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		gpio-open-drain;
+		vin-supply = <&vdd_5v0_sys>;
+	};
 
-		vdd_usb3_vbus: regulator@8 {
-			compatible = "regulator-fixed";
-			reg = <8>;
-			regulator-name = "+5V_USB_SS";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			gpio-open-drain;
-			vin-supply = <&vdd_5v0_sys>;
-		};
+	vdd_usb3_vbus: regulator@8 {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_USB_SS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		gpio-open-drain;
+		vin-supply = <&vdd_5v0_sys>;
+	};
 
-		vdd_3v3_panel: regulator@9 {
-			compatible = "regulator-fixed";
-			reg = <9>;
-			regulator-name = "+3.3V_PANEL";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&pmic 4 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_3v3_run>;
-		};
+	vdd_3v3_panel: regulator@9 {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_PANEL";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pmic 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_run>;
+	};
 
-		vdd_3v3_lp0: regulator@10 {
-			compatible = "regulator-fixed";
-			reg = <10>;
-			regulator-name = "+3.3V_LP0";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			/*
-			 * TODO: find a way to wire this up with the USB EHCI
-			 * controllers so that it can be enabled on demand.
-			 */
-			regulator-always-on;
-			gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_3v3_sys>;
-		};
+	vdd_3v3_lp0: regulator@10 {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_LP0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		/*
+		 * TODO: find a way to wire this up with the USB EHCI
+		 * controllers so that it can be enabled on demand.
+		 */
+		regulator-always-on;
+		gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
 
-		vdd_hdmi_pll: regulator@11 {
-			compatible = "regulator-fixed";
-			reg = <11>;
-			regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
-			regulator-min-microvolt = <1050000>;
-			regulator-max-microvolt = <1050000>;
-			gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
-			vin-supply = <&vdd_1v05_run>;
-		};
+	vdd_hdmi_pll: regulator@11 {
+		compatible = "regulator-fixed";
+		regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1050000>;
+		gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+		vin-supply = <&vdd_1v05_run>;
+	};
 
-		vdd_5v0_hdmi: regulator@12 {
-			compatible = "regulator-fixed";
-			reg = <12>;
-			regulator-name = "+5V_HDMI_CON";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_5v0_sys>;
-		};
+	vdd_5v0_hdmi: regulator@12 {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_HDMI_CON";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
 	};
 
 	sound {
diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts
index 73361dbe2e43..e6b54ac1ebd1 100644
--- a/arch/arm/boot/dts/tegra124-venice2.dts
+++ b/arch/arm/boot/dts/tegra124-venice2.dts
@@ -1002,7 +1002,7 @@
 		};
 	};
 
-	sdhci@700b0400 {
+	mmc@700b0400 {
 		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
 		power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
 		wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
@@ -1011,7 +1011,7 @@
 		vqmmc-supply = <&vddio_sdmmc3>;
 	};
 
-	sdhci@700b0600 {
+	mmc@700b0600 {
 		status = "okay";
 		bus-width = <8>;
 		non-removable;
@@ -1061,17 +1061,10 @@
 		default-brightness-level = <6>;
 	};
 
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
+	clk32k_in: clock@0 {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
 	};
 
 	gpio-keys {
@@ -1088,164 +1081,145 @@
 
 	panel: panel {
 		compatible = "lg,lp129qe";
-
+		power-supply = <&vdd_3v3_panel>;
 		backlight = <&backlight>;
 		ddc-i2c-bus = <&dpaux>;
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vdd_mux: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "+VDD_MUX";
-			regulator-min-microvolt = <12000000>;
-			regulator-max-microvolt = <12000000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
+	vdd_mux: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "+VDD_MUX";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
 
-		vdd_5v0_sys: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "+5V_SYS";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-			regulator-boot-on;
-			vin-supply = <&vdd_mux>;
-		};
+	vdd_5v0_sys: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_SYS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd_mux>;
+	};
 
-		vdd_3v3_sys: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "+3.3V_SYS";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-			regulator-boot-on;
-			vin-supply = <&vdd_mux>;
-		};
+	vdd_3v3_sys: regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_SYS";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd_mux>;
+	};
 
-		vdd_3v3_run: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "+3.3V_RUN";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_3v3_sys>;
-		};
+	vdd_3v3_run: regulator@3 {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_RUN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
 
-		vdd_3v3_hdmi: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			vin-supply = <&vdd_3v3_run>;
-		};
+	vdd_3v3_hdmi: regulator@4 {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vdd_3v3_run>;
+	};
 
-		vdd_led: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			regulator-name = "+VDD_LED";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_mux>;
-		};
+	vdd_led: regulator@5 {
+		compatible = "regulator-fixed";
+		regulator-name = "+VDD_LED";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_mux>;
+	};
 
-		vdd_5v0_ts: regulator@6 {
-			compatible = "regulator-fixed";
-			reg = <6>;
-			regulator-name = "+5V_VDD_TS_SW";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-boot-on;
-			gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_5v0_sys>;
-		};
+	vdd_5v0_ts: regulator@6 {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_VDD_TS_SW";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
 
-		vdd_usb1_vbus: regulator@7 {
-			compatible = "regulator-fixed";
-			reg = <7>;
-			regulator-name = "+5V_USB_HS";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			gpio-open-drain;
-			vin-supply = <&vdd_5v0_sys>;
-		};
+	vdd_usb1_vbus: regulator@7 {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_USB_HS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		gpio-open-drain;
+		vin-supply = <&vdd_5v0_sys>;
+	};
 
-		vdd_usb3_vbus: regulator@8 {
-			compatible = "regulator-fixed";
-			reg = <8>;
-			regulator-name = "+5V_USB_SS";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			gpio-open-drain;
-			vin-supply = <&vdd_5v0_sys>;
-		};
+	vdd_usb3_vbus: regulator@8 {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_USB_SS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		gpio-open-drain;
+		vin-supply = <&vdd_5v0_sys>;
+	};
 
-		vdd_3v3_panel: regulator@9 {
-			compatible = "regulator-fixed";
-			reg = <9>;
-			regulator-name = "+3.3V_PANEL";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&pmic 4 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_3v3_run>;
-		};
+	vdd_3v3_panel: regulator@9 {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_PANEL";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pmic 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_run>;
+	};
 
-		vdd_3v3_lp0: regulator@10 {
-			compatible = "regulator-fixed";
-			reg = <10>;
-			regulator-name = "+3.3V_LP0";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			/*
-			 * TODO: find a way to wire this up with the USB EHCI
-			 * controllers so that it can be enabled on demand.
-			 */
-			regulator-always-on;
-			gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_3v3_sys>;
-		};
+	vdd_3v3_lp0: regulator@10 {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_LP0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		/*
+		 * TODO: find a way to wire this up with the USB EHCI
+		 * controllers so that it can be enabled on demand.
+		 */
+		regulator-always-on;
+		gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
 
-		vdd_hdmi_pll: regulator@11 {
-			compatible = "regulator-fixed";
-			reg = <11>;
-			regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
-			regulator-min-microvolt = <1050000>;
-			regulator-max-microvolt = <1050000>;
-			gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
-			vin-supply = <&vdd_1v05_run>;
-		};
+	vdd_hdmi_pll: regulator@11 {
+		compatible = "regulator-fixed";
+		regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1050000>;
+		gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+		vin-supply = <&vdd_1v05_run>;
+	};
 
-		vdd_5v0_hdmi: regulator@12 {
-			compatible = "regulator-fixed";
-			reg = <12>;
-			regulator-name = "+5V_HDMI_CON";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_5v0_sys>;
-		};
+	vdd_5v0_hdmi: regulator@12 {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_HDMI_CON";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
 	};
 
 	sound {
diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
index 94cac13d3e50..64f488ba1e72 100644
--- a/arch/arm/boot/dts/tegra124.dtsi
+++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -22,9 +22,9 @@
 	pcie@1003000 {
 		compatible = "nvidia,tegra124-pcie";
 		device_type = "pci";
-		reg = <0x0 0x01003000 0x0 0x00000800   /* PADS registers */
-		       0x0 0x01003800 0x0 0x00000800   /* AFI registers */
-		       0x0 0x02000000 0x0 0x10000000>; /* configuration space */
+		reg = <0x0 0x01003000 0x0 0x00000800>, /* PADS registers */
+		      <0x0 0x01003800 0x0 0x00000800>, /* AFI registers */
+		      <0x0 0x02000000 0x0 0x10000000>; /* configuration space */
 		reg-names = "pads", "afi", "cs";
 		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
 			     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
@@ -38,11 +38,11 @@
 		#address-cells = <3>;
 		#size-cells = <2>;
 
-		ranges = <0x82000000 0 0x01000000 0x0 0x01000000 0 0x00001000   /* port 0 configuration space */
-			  0x82000000 0 0x01001000 0x0 0x01001000 0 0x00001000   /* port 1 configuration space */
-			  0x81000000 0 0x0        0x0 0x12000000 0 0x00010000   /* downstream I/O (64 KiB) */
-			  0x82000000 0 0x13000000 0x0 0x13000000 0 0x0d000000   /* non-prefetchable memory (208 MiB) */
-			  0xc2000000 0 0x20000000 0x0 0x20000000 0 0x20000000>; /* prefetchable memory (512 MiB) */
+		ranges = <0x02000000 0 0x01000000 0x0 0x01000000 0 0x00001000>, /* port 0 configuration space */
+			 <0x02000000 0 0x01001000 0x0 0x01001000 0 0x00001000>, /* port 1 configuration space */
+			 <0x01000000 0 0x0        0x0 0x12000000 0 0x00010000>, /* downstream I/O (64 KiB) */
+			 <0x02000000 0 0x13000000 0x0 0x13000000 0 0x0d000000>, /* non-prefetchable memory (208 MiB) */
+			 <0x42000000 0 0x20000000 0x0 0x20000000 0 0x20000000>; /* prefetchable memory (512 MiB) */
 
 		clocks = <&tegra_car TEGRA124_CLK_PCIE>,
 			 <&tegra_car TEGRA124_CLK_AFI>,
@@ -85,11 +85,13 @@
 	};
 
 	host1x@50000000 {
-		compatible = "nvidia,tegra124-host1x", "simple-bus";
+		compatible = "nvidia,tegra124-host1x";
 		reg = <0x0 0x50000000 0x0 0x00034000>;
 		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
 			     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */
+		interrupt-names = "syncpt", "host1x";
 		clocks = <&tegra_car TEGRA124_CLK_HOST1X>;
+		clock-names = "host1x";
 		resets = <&tegra_car 28>;
 		reset-names = "host1x";
 		iommus = <&mc TEGRA_SWGROUP_HC>;
@@ -103,9 +105,8 @@
 			compatible = "nvidia,tegra124-dc";
 			reg = <0x0 0x54200000 0x0 0x00040000>;
 			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA124_CLK_DISP1>,
-				 <&tegra_car TEGRA124_CLK_PLL_P>;
-			clock-names = "dc", "parent";
+			clocks = <&tegra_car TEGRA124_CLK_DISP1>;
+			clock-names = "dc";
 			resets = <&tegra_car 27>;
 			reset-names = "dc";
 
@@ -118,9 +119,8 @@
 			compatible = "nvidia,tegra124-dc";
 			reg = <0x0 0x54240000 0x0 0x00040000>;
 			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA124_CLK_DISP2>,
-				 <&tegra_car TEGRA124_CLK_PLL_P>;
-			clock-names = "dc", "parent";
+			clocks = <&tegra_car TEGRA124_CLK_DISP2>;
+			clock-names = "dc";
 			resets = <&tegra_car 26>;
 			reset-names = "dc";
 
@@ -178,6 +178,11 @@
 			resets = <&tegra_car 181>;
 			reset-names = "dpaux";
 			status = "disabled";
+
+			i2c-bus {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
 		};
 	};
 
@@ -622,6 +627,7 @@
 		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
 
 		#iommu-cells = <1>;
+		#reset-cells = <1>;
 	};
 
 	emc: external-memory-controller@7001b000 {
@@ -679,8 +685,8 @@
 			 <&tegra_car TEGRA124_CLK_XUSB_HOST_SRC>,
 			 <&tegra_car TEGRA124_CLK_XUSB_FALCON_SRC>,
 			 <&tegra_car TEGRA124_CLK_XUSB_SS>,
-			 <&tegra_car TEGRA124_CLK_XUSB_SS_DIV2>,
 			 <&tegra_car TEGRA124_CLK_XUSB_SS_SRC>,
+			 <&tegra_car TEGRA124_CLK_XUSB_SS_DIV2>,
 			 <&tegra_car TEGRA124_CLK_XUSB_HS_SRC>,
 			 <&tegra_car TEGRA124_CLK_XUSB_FS_SRC>,
 			 <&tegra_car TEGRA124_CLK_PLL_U_480M>,
@@ -688,7 +694,7 @@
 			 <&tegra_car TEGRA124_CLK_PLL_E>;
 		clock-names = "xusb_host", "xusb_host_src",
 			      "xusb_falcon_src", "xusb_ss",
-			      "xusb_ss_div2", "xusb_ss_src",
+			      "xusb_ss_src", "xusb_ss_div2",
 			      "xusb_hs_src", "xusb_fs_src",
 			      "pll_u_480m", "clk_m", "pll_e";
 		resets = <&tegra_car 89>, <&tegra_car 156>,
@@ -833,41 +839,45 @@
 		};
 	};
 
-	sdhci@700b0000 {
+	mmc@700b0000 {
 		compatible = "nvidia,tegra124-sdhci";
 		reg = <0x0 0x700b0000 0x0 0x200>;
 		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_SDMMC1>;
+		clock-names = "sdhci";
 		resets = <&tegra_car 14>;
 		reset-names = "sdhci";
 		status = "disabled";
 	};
 
-	sdhci@700b0200 {
+	mmc@700b0200 {
 		compatible = "nvidia,tegra124-sdhci";
 		reg = <0x0 0x700b0200 0x0 0x200>;
 		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_SDMMC2>;
+		clock-names = "sdhci";
 		resets = <&tegra_car 9>;
 		reset-names = "sdhci";
 		status = "disabled";
 	};
 
-	sdhci@700b0400 {
+	mmc@700b0400 {
 		compatible = "nvidia,tegra124-sdhci";
 		reg = <0x0 0x700b0400 0x0 0x200>;
 		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_SDMMC3>;
+		clock-names = "sdhci";
 		resets = <&tegra_car 69>;
 		reset-names = "sdhci";
 		status = "disabled";
 	};
 
-	sdhci@700b0600 {
+	mmc@700b0600 {
 		compatible = "nvidia,tegra124-sdhci";
 		reg = <0x0 0x700b0600 0x0 0x200>;
 		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_SDMMC4>;
+		clock-names = "sdhci";
 		resets = <&tegra_car 15>;
 		reset-names = "sdhci";
 		status = "disabled";
@@ -885,8 +895,8 @@
 
 	soctherm: thermal-sensor@700e2000 {
 		compatible = "nvidia,tegra124-soctherm";
-		reg = <0x0 0x700e2000 0x0 0x600 /* SOC_THERM reg_base */
-			0x0 0x60006000 0x0 0x400>; /* CAR reg_base */
+		reg = <0x0 0x700e2000 0x0 0x600>, /* SOC_THERM reg_base */
+		      <0x0 0x60006000 0x0 0x400>; /* CAR reg_base */
 		reg-names = "soctherm-reg", "car-reg";
 		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_TSENSOR>,
@@ -1056,6 +1066,7 @@
 		clock-names = "reg", "pll_u", "utmi-pads";
 		resets = <&tegra_car 22>, <&tegra_car 22>;
 		reset-names = "usb", "utmi-pads";
+		#phy-cells = <0>;
 		nvidia,hssync-start-delay = <0>;
 		nvidia,idle-wait-delay = <17>;
 		nvidia,elastic-limit = <16>;
@@ -1093,6 +1104,7 @@
 		clock-names = "reg", "pll_u", "utmi-pads";
 		resets = <&tegra_car 58>, <&tegra_car 22>;
 		reset-names = "usb", "utmi-pads";
+		#phy-cells = <0>;
 		nvidia,hssync-start-delay = <0>;
 		nvidia,idle-wait-delay = <17>;
 		nvidia,elastic-limit = <16>;
@@ -1129,6 +1141,7 @@
 		clock-names = "reg", "pll_u", "utmi-pads";
 		resets = <&tegra_car 59>, <&tegra_car 22>;
 		reset-names = "usb", "utmi-pads";
+		#phy-cells = <0>;
 		nvidia,hssync-start-delay = <0>;
 		nvidia,idle-wait-delay = <17>;
 		nvidia,elastic-limit = <16>;
diff --git a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
new file mode 100644
index 000000000000..2d683c9a1a5d
--- /dev/null
+++ b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
@@ -0,0 +1,1438 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "tegra20.dtsi"
+#include "tegra20-cpu-opp.dtsi"
+#include "tegra20-cpu-opp-microvolt.dtsi"
+
+/ {
+	model = "Acer Iconia Tab A500";
+	compatible = "acer,picasso", "nvidia,tegra20";
+
+	aliases {
+		rtc0 = &pmic;
+		rtc1 = "/rtc@7000e000";
+
+		serial0 = &uartd; /* Docking station */
+		serial1 = &uartc; /* Bluetooth */
+		serial2 = &uartb; /* GPS */
+	};
+
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	memory@0 {
+		reg = <0x00000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		ramoops@2ffe0000 {
+			compatible = "ramoops";
+			reg = <0x2ffe0000 0x10000>;	/* 64kB */
+			console-size = <0x8000>;	/* 32kB */
+			record-size = <0x400>;		/*  1kB */
+			ecc-size = <16>;
+		};
+
+		linux,cma@30000000 {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0x30000000 0x10000000>;
+			size = <0x10000000>; /* 256MiB */
+			linux,cma-default;
+			reusable;
+		};
+	};
+
+	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+
+				port@0 {
+					lcd_output: endpoint {
+						remote-endpoint = <&lvds_encoder_input>;
+						bus-width = <18>;
+					};
+				};
+			};
+		};
+
+		hdmi@54280000 {
+			status = "okay";
+
+			vdd-supply = <&hdmi_vdd_reg>;
+			pll-supply = <&hdmi_pll_reg>;
+			hdmi-supply = <&vdd_5v0_sys>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
+				GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	pinmux@70000014 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			ata {
+				nvidia,pins = "ata";
+				nvidia,function = "ide";
+			};
+			atb {
+				nvidia,pins = "atb", "gma", "gme";
+				nvidia,function = "sdio4";
+			};
+			atc {
+				nvidia,pins = "atc";
+				nvidia,function = "nand";
+			};
+			atd {
+				nvidia,pins = "atd", "ate", "gmb", "spia",
+					"spib", "spic";
+				nvidia,function = "gmi";
+			};
+			cdev1 {
+				nvidia,pins = "cdev1";
+				nvidia,function = "plla_out";
+			};
+			cdev2 {
+				nvidia,pins = "cdev2";
+				nvidia,function = "pllp_out4";
+			};
+			crtp {
+				nvidia,pins = "crtp", "lm1";
+				nvidia,function = "crt";
+			};
+			csus {
+				nvidia,pins = "csus";
+				nvidia,function = "vi_sensor_clk";
+			};
+			dap1 {
+				nvidia,pins = "dap1";
+				nvidia,function = "dap1";
+			};
+			dap2 {
+				nvidia,pins = "dap2";
+				nvidia,function = "dap2";
+			};
+			dap3 {
+				nvidia,pins = "dap3";
+				nvidia,function = "dap3";
+			};
+			dap4 {
+				nvidia,pins = "dap4";
+				nvidia,function = "dap4";
+			};
+			dta {
+				nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte";
+				nvidia,function = "vi";
+			};
+			dtf {
+				nvidia,pins = "dtf";
+				nvidia,function = "i2c3";
+			};
+			gmc {
+				nvidia,pins = "gmc";
+				nvidia,function = "uartd";
+			};
+			gmd {
+				nvidia,pins = "gmd";
+				nvidia,function = "sflash";
+			};
+			gpu {
+				nvidia,pins = "gpu";
+				nvidia,function = "pwm";
+			};
+			gpu7 {
+				nvidia,pins = "gpu7";
+				nvidia,function = "rtck";
+			};
+			gpv {
+				nvidia,pins = "gpv", "slxa";
+				nvidia,function = "pcie";
+			};
+			hdint {
+				nvidia,pins = "hdint";
+				nvidia,function = "hdmi";
+			};
+			i2cp {
+				nvidia,pins = "i2cp";
+				nvidia,function = "i2cp";
+			};
+			irrx {
+				nvidia,pins = "irrx", "irtx";
+				nvidia,function = "uartb";
+			};
+			kbca {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					"kbce", "kbcf";
+				nvidia,function = "kbc";
+			};
+			lcsn {
+				nvidia,pins = "lcsn", "ldc", "lm0", "lpw1",
+					"lsdi", "lvp0";
+				nvidia,function = "rsvd4";
+			};
+			ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lpp", "lsc0",
+					"lsc1", "lsck", "lsda", "lspi", "lvp1",
+					"lvs";
+				nvidia,function = "displaya";
+			};
+			owc {
+				nvidia,pins = "owc", "spdi", "spdo", "uac";
+				nvidia,function = "rsvd2";
+			};
+			pmc {
+				nvidia,pins = "pmc";
+				nvidia,function = "pwr_on";
+			};
+			rm {
+				nvidia,pins = "rm";
+				nvidia,function = "i2c1";
+			};
+			sdb {
+				nvidia,pins = "sdb", "sdc", "sdd", "slxc", "slxk";
+				nvidia,function = "sdio3";
+			};
+			sdio1 {
+				nvidia,pins = "sdio1";
+				nvidia,function = "sdio1";
+			};
+			slxd {
+				nvidia,pins = "slxd";
+				nvidia,function = "spdif";
+			};
+			spid {
+				nvidia,pins = "spid", "spie", "spif";
+				nvidia,function = "spi1";
+			};
+			spig {
+				nvidia,pins = "spig", "spih";
+				nvidia,function = "spi2_alt";
+			};
+			uaa {
+				nvidia,pins = "uaa", "uab", "uda";
+				nvidia,function = "ulpi";
+			};
+			uad {
+				nvidia,pins = "uad";
+				nvidia,function = "irda";
+			};
+			uca {
+				nvidia,pins = "uca", "ucb";
+				nvidia,function = "uartc";
+			};
+			conf_ata {
+				nvidia,pins = "ata", "atb", "atc", "atd",
+					"cdev1", "cdev2", "csus", "dap1",
+					"dap4", "dte", "dtf", "gma", "gmc",
+					"gme", "gpu", "gpu7", "gpv", "i2cp",
+					"irrx", "irtx", "pta", "rm",
+					"sdc", "sdd", "slxc", "slxd", "slxk",
+					"spdi", "spdo", "uac", "uad", "uda";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_ate {
+				nvidia,pins = "ate", "dap2", "dap3",
+					"gmd", "owc", "spia", "spib", "spic",
+					"spid", "spie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_ck32 {
+				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
+					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+			};
+			conf_crtp {
+				nvidia,pins = "crtp", "gmb", "slxa", "spig",
+					"spih";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_dta {
+				nvidia,pins = "dta", "dtb", "dtc", "dtd", "kbcb";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_dte {
+				nvidia,pins = "spif";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_hdint {
+				nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
+					"lpw1", "lsck", "lsda", "lsdi",
+					"lvp0";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+			conf_kbca {
+				nvidia,pins = "kbca", "kbcc", "kbcd",
+					"kbce", "kbcf", "sdio1", "uaa",
+					"uab", "uca", "ucb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_lc {
+				nvidia,pins = "lc", "ls";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+			};
+			conf_ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lm0", "lpp",
+					"lpw0", "lpw2", "lsc0", "lsc1", "lspi",
+					"lvp1", "lvs", "pmc", "sdb";
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+			conf_ld17_0 {
+				nvidia,pins = "ld17_0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+			};
+			drive_ddc {
+				nvidia,pins = "drive_ddc",
+						"drive_vi1",
+						"drive_sdio1";
+				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_4>;
+			};
+			drive_dbg {
+				nvidia,pins = "drive_dbg",
+						"drive_vi2",
+						"drive_at1",
+						"drive_ao1";
+				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_4>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+		};
+
+		state_i2cmux_ddc: pinmux_i2cmux_ddc {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "i2c2";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
+		};
+
+		state_i2cmux_pta: pinmux_i2cmux_pta {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "i2c2";
+			};
+		};
+
+		state_i2cmux_idle: pinmux_i2cmux_idle {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
+		};
+	};
+
+	tegra_i2s1: i2s@70002800 {
+		status = "okay";
+	};
+
+	uartb: serial@70006040 {
+		compatible = "nvidia,tegra20-hsuart";
+		/* GPS BCM4751 */
+	};
+
+	uartc: serial@70006200 {
+		compatible = "nvidia,tegra20-hsuart";
+		status = "okay";
+
+		/* Azurewave AW-NH665 BCM4329B1 */
+		bluetooth {
+			compatible = "brcm,bcm4329-bt";
+
+			/* PLLP 216MHz / 16 / 4 */
+			max-speed = <3375000>;
+
+			clocks = <&rtc_32k_wifi>;
+			clock-names = "txco";
+
+			vbat-supply  = <&vdd_3v3_sys>;
+			vddio-supply = <&vdd_1v8_sys>;
+
+			device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;
+			host-wakeup-gpios =   <&gpio TEGRA_GPIO(U, 6) GPIO_ACTIVE_HIGH>;
+			shutdown-gpios =      <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	uartd: serial@70006300 {
+		/* Docking station */
+	};
+
+	i2c@7000c000 {
+		clock-frequency = <400000>;
+		status = "okay";
+
+		wm8903: audio-codec@1a {
+			compatible = "wlf,wm8903";
+			reg = <0x1a>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			gpio-cfg = <
+				0x0000 /* MIC_LR_OUT#    GPIO, output, low */
+				0x0000 /* FM2018-enable  GPIO, output, low */
+				0x0000 /* Speaker-enable GPIO, output, low */
+				0x0200 /* Interrupt, output */
+				0x01a0 /* BCLK, input, active high */
+			>;
+
+			AVDD-supply  = <&vdd_1v8_sys>;
+			CPVDD-supply = <&vdd_1v8_sys>;
+			DBVDD-supply = <&vdd_1v8_sys>;
+			DCVDD-supply = <&vdd_1v8_sys>;
+		};
+
+		touchscreen@4c {
+			compatible = "atmel,maxtouch";
+			reg = <0x4c>;
+
+			atmel,cfg_name = "maxtouch-acer-iconia-tab-a500.cfg";
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(V, 6) IRQ_TYPE_LEVEL_LOW>;
+
+			reset-gpios = <&gpio TEGRA_GPIO(Q, 7) GPIO_ACTIVE_HIGH>;
+
+			avdd-supply = <&vdd_3v3_sys>;
+			vdd-supply  = <&vdd_3v3_sys>;
+		};
+
+		gyroscope@68 {
+			compatible = "invensense,mpu3050";
+			reg = <0x68>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(Z, 4) IRQ_TYPE_EDGE_RISING>;
+
+			vdd-supply    = <&vdd_3v3_sys>;
+			vlogic-supply = <&vdd_1v8_sys>;
+
+			mount-matrix =	 "0",  "1",  "0",
+					 "1",  "0",  "0",
+					 "0",  "0", "-1";
+
+			i2c-gate {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				accelerometer@f {
+					compatible = "kionix,kxtf9";
+					reg = <0x0f>;
+
+					interrupt-parent = <&gpio>;
+					interrupts = <TEGRA_GPIO(S, 7) IRQ_TYPE_EDGE_RISING>;
+
+					mount-matrix =	 "0",  "1",  "0",
+							 "1",  "0",  "0",
+							 "0",  "0", "-1";
+				};
+			};
+		};
+	};
+
+	i2c@7000c400 {
+		clock-frequency = <10000>;
+		status = "okay";
+	};
+
+	i2cmux {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&{/i2c@7000c400}>;
+
+		pinctrl-names = "ddc", "pta", "idle";
+		pinctrl-0 = <&state_i2cmux_ddc>;
+		pinctrl-1 = <&state_i2cmux_pta>;
+		pinctrl-2 = <&state_i2cmux_idle>;
+
+		hdmi_ddc: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		panel_ddc: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	pwm: pwm@7000a000 {
+		status = "okay";
+	};
+
+	i2c@7000d000 {
+		clock-frequency = <100000>;
+		status = "okay";
+
+		magnetometer@c {
+			compatible = "ak,ak8975";
+			reg = <0x0c>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(N, 5) IRQ_TYPE_EDGE_RISING>;
+
+			vdd-supply = <&vdd_3v3_sys>;
+			vid-supply = <&vdd_1v8_sys>;
+
+			mount-matrix =	"1",  "0",  "0",
+					"0", "-1",  "0",
+					"0",  "0", "-1";
+		};
+
+		pmic: pmic@34 {
+			compatible = "ti,tps6586x";
+			reg = <0x34>;
+
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			sys-supply       = <&vdd_5v0_sys>;
+			vin-sm0-supply   = <&sys_reg>;
+			vin-sm1-supply   = <&sys_reg>;
+			vin-sm2-supply   = <&sys_reg>;
+			vinldo01-supply  = <&sm2_reg>;
+			vinldo23-supply  = <&sm2_reg>;
+			vinldo4-supply   = <&sm2_reg>;
+			vinldo678-supply = <&sm2_reg>;
+			vinldo9-supply   = <&sm2_reg>;
+
+			regulators {
+				sys_reg: sys {
+					regulator-name = "vdd_sys";
+					regulator-always-on;
+				};
+
+				vdd_core: sm0 {
+					regulator-name = "vdd_sm0,vdd_core";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1300000>;
+					regulator-coupled-with = <&rtc_vdd &vdd_cpu>;
+					regulator-coupled-max-spread = <170000 550000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					nvidia,tegra-core-regulator;
+				};
+
+				vdd_cpu: sm1 {
+					regulator-name = "vdd_sm1,vdd_cpu";
+					regulator-min-microvolt = <750000>;
+					regulator-max-microvolt = <1125000>;
+					regulator-coupled-with = <&vdd_core &rtc_vdd>;
+					regulator-coupled-max-spread = <550000 550000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					nvidia,tegra-cpu-regulator;
+				};
+
+				sm2_reg: sm2 {
+					regulator-name = "vdd_sm2,vin_ldo*";
+					regulator-min-microvolt = <3700000>;
+					regulator-max-microvolt = <3700000>;
+					regulator-always-on;
+				};
+
+				/* LDO0 is not connected to anything */
+
+				ldo1 {
+					regulator-name = "vdd_ldo1,avdd_pll*";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				rtc_vdd: ldo2 {
+					regulator-name = "vdd_ldo2,vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1300000>;
+					regulator-coupled-with = <&vdd_core &vdd_cpu>;
+					regulator-coupled-max-spread = <170000 550000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					nvidia,tegra-rtc-regulator;
+				};
+
+				ldo3 {
+					regulator-name = "vdd_ldo3,avdd_usb*";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo4 {
+					regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vcore_emmc: ldo5 {
+					regulator-name = "vdd_ldo5,vcore_mmc";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				avdd_vdac_reg: ldo6 {
+					regulator-name = "vdd_ldo6,avdd_vdac";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+				};
+
+				hdmi_vdd_reg: ldo7 {
+					regulator-name = "vdd_ldo7,avdd_hdmi";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				hdmi_pll_reg: ldo8 {
+					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo9 {
+					regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo_rtc {
+					regulator-name = "vdd_rtc_out,vdd_cell";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+			};
+		};
+
+		nct1008: temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+			vcc-supply = <&vdd_3v3_sys>;
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <2000>;
+		nvidia,cpu-pwr-off-time = <100>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <458>;
+		nvidia,sys-clock-req-active-high;
+	};
+
+	usb@c5000000 {
+		compatible = "nvidia,tegra20-udc";
+		status = "okay";
+		dr_mode = "peripheral";
+	};
+
+	usb-phy@c5000000 {
+		status = "okay";
+		dr_mode = "peripheral";
+		nvidia,xcvr-setup-use-fuses;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		vbus-supply = <&vdd_vbus1>;
+	};
+
+	usb@c5008000 {
+		status = "okay";
+	};
+
+	usb-phy@c5008000 {
+		status = "okay";
+		nvidia,xcvr-setup-use-fuses;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		vbus-supply = <&vdd_vbus3>;
+	};
+
+	brcm_wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+
+		clocks = <&rtc_32k_wifi>;
+		clock-names = "ext_clock";
+
+		reset-gpios = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <300>;
+		power-off-delay-us = <300>;
+	};
+
+	mmc@c8000000 {
+		status = "okay";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		max-frequency = <25000000>;
+		keep-power-in-suspend;
+		bus-width = <4>;
+		non-removable;
+
+		mmc-pwrseq = <&brcm_wifi_pwrseq>;
+		vmmc-supply = <&vdd_3v3_sys>;
+		vqmmc-supply = <&vdd_3v3_sys>;
+
+		/* Azurewave AW-NH611 BCM4329 */
+		wifi@1 {
+			reg = <1>;
+			compatible = "brcm,bcm4329-fmac";
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(S, 0) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host-wake";
+		};
+	};
+
+	mmc@c8000400 {
+		status = "okay";
+		bus-width = <4>;
+		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
+		vmmc-supply = <&vdd_3v3_sys>;
+		vqmmc-supply = <&vdd_3v3_sys>;
+	};
+
+	mmc@c8000600 {
+		status = "okay";
+		bus-width = <8>;
+		vmmc-supply = <&vcore_emmc>;
+		vqmmc-supply = <&vdd_3v3_sys>;
+		non-removable;
+	};
+
+	mains: ac-adapter-detect {
+		compatible = "gpio-charger";
+		charger-type = "mains";
+		gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_3v3_sys>;
+		pwms = <&pwm 2 41667>;
+
+		brightness-levels = <7 255>;
+		num-interpolated-steps = <248>;
+		default-brightness-level = <20>;
+	};
+
+	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
+	clk32k_in: clock@0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "tps658621-out32k";
+	};
+
+	/*
+	 * This standalone onboard fixed-clock always-ON 32KHz
+	 * oscillator is used as a reference clock-source by the
+	 * Azurewave WiFi/BT module.
+	 */
+	rtc_32k_wifi: clock@1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "kk3270032";
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu@1 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+	};
+
+	display-panel {
+		compatible = "auo,b101ew05", "panel-lvds";
+
+		ddc-i2c-bus = <&panel_ddc>;
+		power-supply = <&vdd_pnl>;
+		backlight = <&backlight>;
+
+		width-mm = <218>;
+		height-mm = <135>;
+
+		data-mapping = "jeida-18";
+
+		panel-timing {
+			clock-frequency = <71200000>;
+			hactive = <1280>;
+			vactive = <800>;
+			hfront-porch = <8>;
+			hback-porch = <18>;
+			hsync-len = <184>;
+			vsync-len = <3>;
+			vfront-porch = <4>;
+			vback-porch = <8>;
+		};
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&lvds_encoder_output>;
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		rotation-lock {
+			label = "Rotate-lock";
+			gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_HIGH>;
+			linux,code = <SW_ROTATE_LOCK>;
+			linux,input-type = <EV_SW>;
+			debounce-interval = <10>;
+		};
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(Q, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	haptic-feedback {
+		compatible = "gpio-vibrator";
+		enable-gpios = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>;
+		vcc-supply = <&vdd_3v3_sys>;
+	};
+
+	lvds-encoder {
+		compatible = "ti,sn75lvds83", "lvds-encoder";
+
+		powerdown-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_encoder_input: endpoint {
+					remote-endpoint = <&lcd_output>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_encoder_output: endpoint {
+					remote-endpoint = <&panel_input>;
+				};
+			};
+		};
+	};
+
+	vdd_5v0_sys: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vdd_3v3_sys: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_vs";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_1v8_sys: regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v8_vs";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_pnl: regulator@3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_panel";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-enable-ramp-delay = <300000>;
+		gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_vbus1: regulator@4 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_usb1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_vbus3: regulator@5 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_usb3_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		gpio = <&gpio TEGRA_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-wm8903-picasso",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "Acer Iconia Tab A500 WM8903";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "LINEOUTL",
+			"Int Spk", "LINEOUTR",
+			"Mic Jack", "MICBIAS",
+			"IN2L", "Mic Jack",
+			"IN2R", "Mic Jack",
+			"IN1L", "Int Mic",
+			"IN1R", "Int Mic";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&wm8903>;
+
+		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
+		nvidia,int-mic-en-gpios = <&wm8903 1 GPIO_ACTIVE_HIGH>;
+		nvidia,headset;
+
+		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA20_CLK_CDEV1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
+
+	thermal-zones {
+		nct1008-local {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <0>; /* milliseconds */
+
+			thermal-sensors = <&nct1008 0>;
+		};
+
+		nct1008-remote {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct1008 1>;
+
+			trips {
+				trip0: cpu-alert0 {
+					/* start throttling at 50C */
+					temperature = <50000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+
+				trip1: cpu-crit {
+					/* shut down at 60C */
+					temperature = <60000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&trip0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	memory-controller@7000f400 {
+		nvidia,use-ram-code;
+
+		emc-tables@0 {
+			nvidia,ram-code = <0>; /* elpida-8gb */
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			emc-table@25000 {
+				reg = <25000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <25000>;
+				nvidia,emc-registers = <0x00000002 0x00000006
+					0x00000003 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000004
+					0x00000003 0x00000008 0x0000000b 0x0000004d
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000004
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000068 0x00000000 0x00000003
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x00070000 0x00000000 0x00000000 0x00000003
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@50000 {
+				reg = <50000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <50000>;
+				nvidia,emc-registers = <0x00000003 0x00000007
+					0x00000003 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x0000009f
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000007
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x000000d0 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x00070000 0x00000000 0x00000000 0x00000005
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@75000 {
+				reg = <75000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <75000>;
+				nvidia,emc-registers = <0x00000005 0x0000000a
+					0x00000004 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x000000ff
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x0000000b
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000138 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x00070000 0x00000000 0x00000000 0x00000007
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@150000 {
+				reg = <150000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <150000>;
+				nvidia,emc-registers = <0x00000009 0x00000014
+					0x00000007 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x0000021f
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000015
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000270 0x00000000 0x00000001
+					0x00000000 0x00000000 0x00000282 0xa07c04ae
+					0x007dd510 0x00000000 0x00000000 0x0000000e
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@300000 {
+				reg = <300000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <300000>;
+				nvidia,emc-registers = <0x00000012 0x00000027
+					0x0000000d 0x00000006 0x00000007 0x00000005
+					0x00000003 0x00000009 0x00000006 0x00000006
+					0x00000003 0x00000003 0x00000002 0x00000006
+					0x00000003 0x00000009 0x0000000c 0x0000045f
+					0x00000000 0x00000004 0x00000004 0x00000006
+					0x00000008 0x00000001 0x0000000e 0x0000002a
+					0x00000003 0x0000000f 0x00000007 0x00000005
+					0x00000002 0x000004e1 0x00000005 0x00000002
+					0x00000000 0x00000000 0x00000282 0xe059048b
+					0x007e1510 0x00000000 0x00000000 0x0000001b
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+		};
+
+		emc-tables@1 {
+			nvidia,ram-code = <1>; /* elpida-4gb */
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			emc-table@25000 {
+				reg = <25000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <25000>;
+				nvidia,emc-registers = <0x00000002 0x00000006
+					0x00000003 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000004
+					0x00000003 0x00000008 0x0000000b 0x0000004d
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000004
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000068 0x00000000 0x00000003
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x0007c000 0x00000000 0x00000000 0x00000003
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@50000 {
+				reg = <50000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <50000>;
+				nvidia,emc-registers = <0x00000003 0x00000007
+					0x00000003 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x0000009f
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000007
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x000000d0 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x0007c000 0x00000000 0x00000000 0x00000005
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@75000 {
+				reg = <75000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <75000>;
+				nvidia,emc-registers = <0x00000005 0x0000000a
+					0x00000004 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x000000ff
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x0000000b
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000138 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x0007c000 0x00000000 0x00000000 0x00000007
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@150000 {
+				reg = <150000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <150000>;
+				nvidia,emc-registers = <0x00000009 0x00000014
+					0x00000007 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x0000021f
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000015
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000270 0x00000000 0x00000001
+					0x00000000 0x00000000 0x00000282 0xa07c04ae
+					0x007e4010 0x00000000 0x00000000 0x0000000e
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@300000 {
+				reg = <300000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <300000>;
+				nvidia,emc-registers = <0x00000012 0x00000027
+					0x0000000d 0x00000006 0x00000007 0x00000005
+					0x00000003 0x00000009 0x00000006 0x00000006
+					0x00000003 0x00000003 0x00000002 0x00000006
+					0x00000003 0x00000009 0x0000000c 0x0000045f
+					0x00000000 0x00000004 0x00000004 0x00000006
+					0x00000008 0x00000001 0x0000000e 0x0000002a
+					0x00000003 0x0000000f 0x00000007 0x00000005
+					0x00000002 0x000004e1 0x00000005 0x00000002
+					0x00000000 0x00000000 0x00000282 0xe059048b
+					0x007e0010 0x00000000 0x00000000 0x0000001b
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+		};
+
+		emc-tables@2 {
+			nvidia,ram-code = <2>; /* hynix-8gb */
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			emc-table@25000 {
+				reg = <25000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <25000>;
+				nvidia,emc-registers = <0x00000002 0x00000006
+					0x00000003 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000004
+					0x00000003 0x00000008 0x0000000b 0x0000004d
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000004
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000068 0x00000000 0x00000003
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x00070000 0x00000000 0x00000000 0x00000003
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@50000 {
+				reg = <50000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <50000>;
+				nvidia,emc-registers = <0x00000003 0x00000007
+					0x00000003 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x0000009f
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000007
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x000000d0 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x00070000 0x00000000 0x00000000 0x00000005
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@75000 {
+				reg = <75000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <75000>;
+				nvidia,emc-registers = <0x00000005 0x0000000a
+					0x00000004 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x000000ff
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x0000000b
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000138 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x00070000 0x00000000 0x00000000 0x00000007
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@150000 {
+				reg = <150000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <150000>;
+				nvidia,emc-registers = <0x00000009 0x00000014
+					0x00000007 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x0000021f
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000015
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000270 0x00000000 0x00000001
+					0x00000000 0x00000000 0x00000282 0xa07c04ae
+					0x007dd010 0x00000000 0x00000000 0x0000000e
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@300000 {
+				reg = <300000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <300000>;
+				nvidia,emc-registers = <0x00000012 0x00000027
+					0x0000000d 0x00000006 0x00000007 0x00000005
+					0x00000003 0x00000009 0x00000006 0x00000006
+					0x00000003 0x00000003 0x00000002 0x00000006
+					0x00000003 0x00000009 0x0000000c 0x0000045f
+					0x00000000 0x00000004 0x00000004 0x00000006
+					0x00000008 0x00000001 0x0000000e 0x0000002a
+					0x00000003 0x0000000f 0x00000007 0x00000005
+					0x00000002 0x000004e1 0x00000005 0x00000002
+					0x00000000 0x00000000 0x00000282 0xe059048b
+					0x007e2010 0x00000000 0x00000000 0x0000001b
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+		};
+
+		emc-tables@3 {
+			nvidia,ram-code = <3>; /* hynix-4gb */
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			emc-table@25000 {
+				reg = <25000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <25000>;
+				nvidia,emc-registers = <0x00000002 0x00000006
+					0x00000003 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000004
+					0x00000003 0x00000008 0x0000000b 0x0000004d
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000004
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000068 0x00000000 0x00000003
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x0007c000 0x00000000 0x00000000 0x00000003
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@50000 {
+				reg = <50000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <50000>;
+				nvidia,emc-registers = <0x00000003 0x00000007
+					0x00000003 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x0000009f
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000007
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x000000d0 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x0007c000 0x00078000 0x00000000 0x00000005
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@75000 {
+				reg = <75000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <75000>;
+				nvidia,emc-registers = <0x00000005 0x0000000a
+					0x00000004 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x000000ff
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x0000000b
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000138 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x0007c000 0x00000000 0x00000000 0x00000007
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@150000 {
+				reg = <150000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <150000>;
+				nvidia,emc-registers = <0x00000009 0x00000014
+					0x00000007 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x0000021f
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000015
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000270 0x00000000 0x00000001
+					0x00000000 0x00000000 0x00000282 0xa07c04ae
+					0x007e4010 0x00000000 0x00000000 0x0000000e
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@300000 {
+				reg = <300000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <300000>;
+				nvidia,emc-registers = <0x00000012 0x00000027
+					0x0000000d 0x00000006 0x00000007 0x00000005
+					0x00000003 0x00000009 0x00000006 0x00000006
+					0x00000003 0x00000003 0x00000002 0x00000006
+					0x00000003 0x00000009 0x0000000c 0x0000045f
+					0x00000000 0x00000004 0x00000004 0x00000006
+					0x00000008 0x00000001 0x0000000e 0x0000002a
+					0x00000003 0x0000000f 0x00000007 0x00000005
+					0x00000002 0x000004e1 0x00000005 0x00000002
+					0x00000000 0x00000000 0x00000282 0xe059048b
+					0x007e0010 0x00000000 0x00000000 0x0000001b
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts
index 37ad508b61d9..a05fb3853da8 100644
--- a/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts
@@ -183,7 +183,7 @@
 	};
 
 	/* SD/MMC */
-	sdhci@c8000600 {
+	mmc@c8000600 {
 		status = "okay";
 		bus-width = <4>;
 		cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>; /* MMCD */
diff --git a/arch/arm/boot/dts/tegra20-colibri-iris.dts b/arch/arm/boot/dts/tegra20-colibri-iris.dts
index af4740847769..425494b9ed54 100644
--- a/arch/arm/boot/dts/tegra20-colibri-iris.dts
+++ b/arch/arm/boot/dts/tegra20-colibri-iris.dts
@@ -171,7 +171,7 @@
 	};
 
 	/* SD/MMC */
-	sdhci@c8000600 {
+	mmc@c8000600 {
 		status = "okay";
 		bus-width = <4>;
 		cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>; /* MMCD */
diff --git a/arch/arm/boot/dts/tegra20-cpu-opp-microvolt.dtsi b/arch/arm/boot/dts/tegra20-cpu-opp-microvolt.dtsi
index e85ffdbef876..dce85d39480d 100644
--- a/arch/arm/boot/dts/tegra20-cpu-opp-microvolt.dtsi
+++ b/arch/arm/boot/dts/tegra20-cpu-opp-microvolt.dtsi
@@ -2,199 +2,199 @@
 
 / {
 	cpu0_opp_table: cpu_opp_table0 {
-		opp@216000000_750 {
+		opp@216000000,750 {
 			opp-microvolt = <750000 750000 1125000>;
 		};
 
-		opp@216000000_800 {
+		opp@216000000,800 {
 			opp-microvolt = <800000 800000 1125000>;
 		};
 
-		opp@312000000_750 {
+		opp@312000000,750 {
 			opp-microvolt = <750000 750000 1125000>;
 		};
 
-		opp@312000000_800 {
+		opp@312000000,800 {
 			opp-microvolt = <800000 800000 1125000>;
 		};
 
-		opp@456000000_750 {
+		opp@456000000,750 {
 			opp-microvolt = <750000 750000 1125000>;
 		};
 
-		opp@456000000_800 {
+		opp@456000000,800 {
 			opp-microvolt = <800000 800000 1125000>;
 		};
 
-		opp@456000000_800_2_2 {
+		opp@456000000,800,2,2 {
 			opp-microvolt = <800000 800000 1125000>;
 		};
 
-		opp@456000000_800_3_2 {
+		opp@456000000,800,3,2 {
 			opp-microvolt = <800000 800000 1125000>;
 		};
 
-		opp@456000000_825 {
+		opp@456000000,825 {
 			opp-microvolt = <825000 825000 1125000>;
 		};
 
-		opp@608000000_750 {
+		opp@608000000,750 {
 			opp-microvolt = <750000 750000 1125000>;
 		};
 
-		opp@608000000_800 {
+		opp@608000000,800 {
 			opp-microvolt = <800000 800000 1125000>;
 		};
 
-		opp@608000000_800_3_2 {
+		opp@608000000,800,3,2 {
 			opp-microvolt = <800000 800000 1125000>;
 		};
 
-		opp@608000000_825 {
+		opp@608000000,825 {
 			opp-microvolt = <825000 825000 1125000>;
 		};
 
-		opp@608000000_850 {
+		opp@608000000,850 {
 			opp-microvolt = <850000 850000 1125000>;
 		};
 
-		opp@608000000_900 {
+		opp@608000000,900 {
 			opp-microvolt = <900000 900000 1125000>;
 		};
 
-		opp@760000000_775 {
+		opp@760000000,775 {
 			opp-microvolt = <775000 775000 1125000>;
 		};
 
-		opp@760000000_800 {
+		opp@760000000,800 {
 			opp-microvolt = <800000 800000 1125000>;
 		};
 
-		opp@760000000_850 {
+		opp@760000000,850 {
 			opp-microvolt = <850000 850000 1125000>;
 		};
 
-		opp@760000000_875 {
+		opp@760000000,875 {
 			opp-microvolt = <875000 875000 1125000>;
 		};
 
-		opp@760000000_875_1_1 {
+		opp@760000000,875,1,1 {
 			opp-microvolt = <875000 875000 1125000>;
 		};
 
-		opp@760000000_875_0_2 {
+		opp@760000000,875,0,2 {
 			opp-microvolt = <875000 875000 1125000>;
 		};
 
-		opp@760000000_875_1_2 {
+		opp@760000000,875,1,2 {
 			opp-microvolt = <875000 875000 1125000>;
 		};
 
-		opp@760000000_900 {
+		opp@760000000,900 {
 			opp-microvolt = <900000 900000 1125000>;
 		};
 
-		opp@760000000_975 {
+		opp@760000000,975 {
 			opp-microvolt = <975000 975000 1125000>;
 		};
 
-		opp@816000000_800 {
+		opp@816000000,800 {
 			opp-microvolt = <800000 800000 1125000>;
 		};
 
-		opp@816000000_850 {
+		opp@816000000,850 {
 			opp-microvolt = <850000 850000 1125000>;
 		};
 
-		opp@816000000_875 {
+		opp@816000000,875 {
 			opp-microvolt = <875000 875000 1125000>;
 		};
 
-		opp@816000000_950 {
+		opp@816000000,950 {
 			opp-microvolt = <950000 950000 1125000>;
 		};
 
-		opp@816000000_1000 {
+		opp@816000000,1000 {
 			opp-microvolt = <1000000 1000000 1125000>;
 		};
 
-		opp@912000000_850 {
+		opp@912000000,850 {
 			opp-microvolt = <850000 850000 1125000>;
 		};
 
-		opp@912000000_900 {
+		opp@912000000,900 {
 			opp-microvolt = <900000 900000 1125000>;
 		};
 
-		opp@912000000_925 {
+		opp@912000000,925 {
 			opp-microvolt = <925000 925000 1125000>;
 		};
 
-		opp@912000000_950 {
+		opp@912000000,950 {
 			opp-microvolt = <950000 950000 1125000>;
 		};
 
-		opp@912000000_950_0_2 {
+		opp@912000000,950,0,2 {
 			opp-microvolt = <950000 950000 1125000>;
 		};
 
-		opp@912000000_950_2_2 {
+		opp@912000000,950,2,2 {
 			opp-microvolt = <950000 950000 1125000>;
 		};
 
-		opp@912000000_1000 {
+		opp@912000000,1000 {
 			opp-microvolt = <1000000 1000000 1125000>;
 		};
 
-		opp@912000000_1050 {
+		opp@912000000,1050 {
 			opp-microvolt = <1050000 1050000 1125000>;
 		};
 
-		opp@1000000000_875 {
+		opp@1000000000,875 {
 			opp-microvolt = <875000 875000 1125000>;
 		};
 
-		opp@1000000000_900 {
+		opp@1000000000,900 {
 			opp-microvolt = <900000 900000 1125000>;
 		};
 
-		opp@1000000000_950 {
+		opp@1000000000,950 {
 			opp-microvolt = <950000 950000 1125000>;
 		};
 
-		opp@1000000000_975 {
+		opp@1000000000,975 {
 			opp-microvolt = <975000 975000 1125000>;
 		};
 
-		opp@1000000000_1000 {
+		opp@1000000000,1000 {
 			opp-microvolt = <1000000 1000000 1125000>;
 		};
 
-		opp@1000000000_1000_0_2 {
+		opp@1000000000,1000,0,2 {
 			opp-microvolt = <1000000 1000000 1125000>;
 		};
 
-		opp@1000000000_1025 {
+		opp@1000000000,1025 {
 			opp-microvolt = <1025000 1025000 1125000>;
 		};
 
-		opp@1000000000_1100 {
+		opp@1000000000,1100 {
 			opp-microvolt = <1100000 1100000 1125000>;
 		};
 
-		opp@1200000000_1000 {
+		opp@1200000000,1000 {
 			opp-microvolt = <1000000 1000000 1125000>;
 		};
 
-		opp@1200000000_1050 {
+		opp@1200000000,1050 {
 			opp-microvolt = <1050000 1050000 1125000>;
 		};
 
-		opp@1200000000_1100 {
+		opp@1200000000,1100 {
 			opp-microvolt = <1100000 1100000 1125000>;
 		};
 
-		opp@1200000000_1125 {
+		opp@1200000000,1125 {
 			opp-microvolt = <1125000 1125000 1125000>;
 		};
 	};
diff --git a/arch/arm/boot/dts/tegra20-cpu-opp.dtsi b/arch/arm/boot/dts/tegra20-cpu-opp.dtsi
index c878f4231791..9b8fedb57a1b 100644
--- a/arch/arm/boot/dts/tegra20-cpu-opp.dtsi
+++ b/arch/arm/boot/dts/tegra20-cpu-opp.dtsi
@@ -5,295 +5,295 @@
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp@216000000_750 {
+		opp@216000000,750 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x0F 0x0003>;
 			opp-hz = /bits/ 64 <216000000>;
 		};
 
-		opp@216000000_800 {
+		opp@216000000,800 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x0F 0x0004>;
 			opp-hz = /bits/ 64 <216000000>;
 		};
 
-		opp@312000000_750 {
+		opp@312000000,750 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x0F 0x0003>;
 			opp-hz = /bits/ 64 <312000000>;
 		};
 
-		opp@312000000_800 {
+		opp@312000000,800 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x0F 0x0004>;
 			opp-hz = /bits/ 64 <312000000>;
 		};
 
-		opp@456000000_750 {
+		opp@456000000,750 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x0C 0x0003>;
 			opp-hz = /bits/ 64 <456000000>;
 		};
 
-		opp@456000000_800 {
+		opp@456000000,800 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x03 0x0006>;
 			opp-hz = /bits/ 64 <456000000>;
 		};
 
-		opp@456000000_800_2_2 {
+		opp@456000000,800,2,2 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x04 0x0004>;
 			opp-hz = /bits/ 64 <456000000>;
 		};
 
-		opp@456000000_800_3_2 {
+		opp@456000000,800,3,2 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x08 0x0004>;
 			opp-hz = /bits/ 64 <456000000>;
 		};
 
-		opp@456000000_825 {
+		opp@456000000,825 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x03 0x0001>;
 			opp-hz = /bits/ 64 <456000000>;
 		};
 
-		opp@608000000_750 {
+		opp@608000000,750 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x08 0x0003>;
 			opp-hz = /bits/ 64 <608000000>;
 		};
 
-		opp@608000000_800 {
+		opp@608000000,800 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x04 0x0006>;
 			opp-hz = /bits/ 64 <608000000>;
 		};
 
-		opp@608000000_800_3_2 {
+		opp@608000000,800,3,2 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x08 0x0004>;
 			opp-hz = /bits/ 64 <608000000>;
 		};
 
-		opp@608000000_825 {
+		opp@608000000,825 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x04 0x0001>;
 			opp-hz = /bits/ 64 <608000000>;
 		};
 
-		opp@608000000_850 {
+		opp@608000000,850 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x03 0x0006>;
 			opp-hz = /bits/ 64 <608000000>;
 		};
 
-		opp@608000000_900 {
+		opp@608000000,900 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x03 0x0001>;
 			opp-hz = /bits/ 64 <608000000>;
 		};
 
-		opp@760000000_775 {
+		opp@760000000,775 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x08 0x0003>;
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@760000000_800 {
+		opp@760000000,800 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x08 0x0004>;
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@760000000_850 {
+		opp@760000000,850 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x04 0x0006>;
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@760000000_875 {
+		opp@760000000,875 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x04 0x0001>;
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@760000000_875_1_1 {
+		opp@760000000,875,1,1 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x02 0x0002>;
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@760000000_875_0_2 {
+		opp@760000000,875,0,2 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x01 0x0004>;
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@760000000_875_1_2 {
+		opp@760000000,875,1,2 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x02 0x0004>;
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@760000000_900 {
+		opp@760000000,900 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x01 0x0002>;
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@760000000_975 {
+		opp@760000000,975 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x03 0x0001>;
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@816000000_800 {
+		opp@816000000,800 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x08 0x0007>;
 			opp-hz = /bits/ 64 <816000000>;
 		};
 
-		opp@816000000_850 {
+		opp@816000000,850 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x04 0x0002>;
 			opp-hz = /bits/ 64 <816000000>;
 		};
 
-		opp@816000000_875 {
+		opp@816000000,875 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x04 0x0005>;
 			opp-hz = /bits/ 64 <816000000>;
 		};
 
-		opp@816000000_950 {
+		opp@816000000,950 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x03 0x0006>;
 			opp-hz = /bits/ 64 <816000000>;
 		};
 
-		opp@816000000_1000 {
+		opp@816000000,1000 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x03 0x0001>;
 			opp-hz = /bits/ 64 <816000000>;
 		};
 
-		opp@912000000_850 {
+		opp@912000000,850 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x08 0x0007>;
 			opp-hz = /bits/ 64 <912000000>;
 		};
 
-		opp@912000000_900 {
+		opp@912000000,900 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x04 0x0002>;
 			opp-hz = /bits/ 64 <912000000>;
 		};
 
-		opp@912000000_925 {
+		opp@912000000,925 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x04 0x0001>;
 			opp-hz = /bits/ 64 <912000000>;
 		};
 
-		opp@912000000_950 {
+		opp@912000000,950 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x02 0x0006>;
 			opp-hz = /bits/ 64 <912000000>;
 		};
 
-		opp@912000000_950_0_2 {
+		opp@912000000,950,0,2 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x01 0x0004>;
 			opp-hz = /bits/ 64 <912000000>;
 		};
 
-		opp@912000000_950_2_2 {
+		opp@912000000,950,2,2 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x04 0x0004>;
 			opp-hz = /bits/ 64 <912000000>;
 		};
 
-		opp@912000000_1000 {
+		opp@912000000,1000 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x01 0x0002>;
 			opp-hz = /bits/ 64 <912000000>;
 		};
 
-		opp@912000000_1050 {
+		opp@912000000,1050 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x03 0x0001>;
 			opp-hz = /bits/ 64 <912000000>;
 		};
 
-		opp@1000000000_875 {
+		opp@1000000000,875 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x08 0x0007>;
 			opp-hz = /bits/ 64 <1000000000>;
 		};
 
-		opp@1000000000_900 {
+		opp@1000000000,900 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x04 0x0002>;
 			opp-hz = /bits/ 64 <1000000000>;
 		};
 
-		opp@1000000000_950 {
+		opp@1000000000,950 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x04 0x0004>;
 			opp-hz = /bits/ 64 <1000000000>;
 		};
 
-		opp@1000000000_975 {
+		opp@1000000000,975 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x04 0x0001>;
 			opp-hz = /bits/ 64 <1000000000>;
 		};
 
-		opp@1000000000_1000 {
+		opp@1000000000,1000 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x02 0x0006>;
 			opp-hz = /bits/ 64 <1000000000>;
 		};
 
-		opp@1000000000_1000_0_2 {
+		opp@1000000000,1000,0,2 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x01 0x0004>;
 			opp-hz = /bits/ 64 <1000000000>;
 		};
 
-		opp@1000000000_1025 {
+		opp@1000000000,1025 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x01 0x0002>;
 			opp-hz = /bits/ 64 <1000000000>;
 		};
 
-		opp@1000000000_1100 {
+		opp@1000000000,1100 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x03 0x0001>;
 			opp-hz = /bits/ 64 <1000000000>;
 		};
 
-		opp@1200000000_1000 {
+		opp@1200000000,1000 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x08 0x0004>;
 			opp-hz = /bits/ 64 <1200000000>;
 		};
 
-		opp@1200000000_1050 {
+		opp@1200000000,1050 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x04 0x0004>;
 			opp-hz = /bits/ 64 <1200000000>;
 		};
 
-		opp@1200000000_1100 {
+		opp@1200000000,1100 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x02 0x0004>;
 			opp-hz = /bits/ 64 <1200000000>;
 		};
 
-		opp@1200000000_1125 {
+		opp@1200000000,1125 {
 			clock-latency-ns = <400000>;
 			opp-supported-hw = <0x01 0x0004>;
 			opp-hz = /bits/ 64 <1200000000>;
diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts
index 02cd67ea2503..86494cb4d5a1 100644
--- a/arch/arm/boot/dts/tegra20-harmony.dts
+++ b/arch/arm/boot/dts/tegra20-harmony.dts
@@ -613,7 +613,7 @@
 		status = "okay";
 	};
 
-	sdhci@c8000200 {
+	mmc@c8000200 {
 		status = "okay";
 		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
 		wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
@@ -621,7 +621,7 @@
 		bus-width = <4>;
 	};
 
-	sdhci@c8000600 {
+	mmc@c8000600 {
 		status = "okay";
 		cd-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_LOW>;
 		wp-gpios = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
@@ -640,17 +640,10 @@
 		default-brightness-level = <6>;
 	};
 
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
+	clk32k_in: clock@0 {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
 	};
 
 	gpio-keys {
@@ -673,79 +666,66 @@
 		backlight = <&backlight>;
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vdd_5v0_reg: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "vdd_5v0";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
+	vdd_5v0_reg: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
 
-		regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "vdd_1v5";
-			regulator-min-microvolt = <1500000>;
-			regulator-max-microvolt = <1500000>;
-			gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
-		};
+	regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v5";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+	};
 
-		regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "vdd_1v2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-		pci_vdd_reg: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "vdd_1v05";
-			regulator-min-microvolt = <1050000>;
-			regulator-max-microvolt = <1050000>;
-			gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	pci_vdd_reg: regulator@3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v05";
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1050000>;
+		gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-		vdd_pnl_reg: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "vdd_pnl";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	vdd_pnl_reg: regulator@4 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_pnl";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-		vdd_bl_reg: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			regulator-name = "vdd_bl";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	vdd_bl_reg: regulator@5 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_bl";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-		vdd_5v0_hdmi: regulator@6 {
-			compatible = "regulator-fixed";
-			reg = <6>;
-			regulator-name = "VDDIO_HDMI";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio TEGRA_GPIO(T, 2) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_5v0_reg>;
-		};
+	vdd_5v0_hdmi: regulator@6 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_HDMI";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(T, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_reg>;
 	};
 
 	sound {
diff --git a/arch/arm/boot/dts/tegra20-medcom-wide.dts b/arch/arm/boot/dts/tegra20-medcom-wide.dts
index c73510cd501c..a348ca30e522 100644
--- a/arch/arm/boot/dts/tegra20-medcom-wide.dts
+++ b/arch/arm/boot/dts/tegra20-medcom-wide.dts
@@ -59,7 +59,7 @@
 	panel: panel {
 		compatible = "innolux,n156bge-l21";
 
-		power-supply =  <&vdd_1v8_reg>, <&vdd_3v3_reg>;
+		power-supply =  <&vdd_1v8_reg>; // <&vdd_3v3_reg>;
 		enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
 
 		backlight = <&backlight>;
@@ -92,44 +92,38 @@
 		clock-names = "pll_a", "pll_a_out0", "mclk";
 	};
 
-	regulators {
-		vcc_24v_reg: regulator@100 {
-			compatible = "regulator-fixed";
-			reg = <100>;
-			regulator-name = "vcc_24v";
-			regulator-min-microvolt = <24000000>;
-			regulator-max-microvolt = <24000000>;
-			regulator-always-on;
-		};
+	vcc_24v_reg: regulator@100 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_24v";
+		regulator-min-microvolt = <24000000>;
+		regulator-max-microvolt = <24000000>;
+		regulator-always-on;
+	};
 
-		vdd_5v0_reg: regulator@101 {
-			compatible = "regulator-fixed";
-			reg = <101>;
-			regulator-name = "vdd_5v0";
-			vin-supply = <&vcc_24v_reg>;
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
+	vdd_5v0_reg: regulator@101 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0";
+		vin-supply = <&vcc_24v_reg>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
 
-		vdd_3v3_reg: regulator@102 {
-			compatible = "regulator-fixed";
-			reg = <102>;
-			regulator-name = "vdd_3v3";
-			vin-supply = <&vcc_24v_reg>;
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
+	vdd_3v3_reg: regulator@102 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3";
+		vin-supply = <&vcc_24v_reg>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
 
-		vdd_1v8_reg: regulator@103 {
-			compatible = "regulator-fixed";
-			reg = <103>;
-			regulator-name = "vdd_1v8";
-			vin-supply = <&vdd_3v3_reg>;
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
+	vdd_1v8_reg: regulator@103 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v8";
+		vin-supply = <&vdd_3v3_reg>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
 	};
 };
diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts
index cce3a3fb82ed..ada2bed8b1b5 100644
--- a/arch/arm/boot/dts/tegra20-paz00.dts
+++ b/arch/arm/boot/dts/tegra20-paz00.dts
@@ -314,7 +314,7 @@
 	memory-controller@7000f400 {
 		nvidia,use-ram-code;
 
-		emc-tables@hynix {
+		emc-tables@0 {
 			nvidia,ram-code = <0x0>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -543,7 +543,7 @@
 		status = "okay";
 	};
 
-	sdhci@c8000000 {
+	mmc@c8000000 {
 		status = "okay";
 		cd-gpios = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_LOW>;
 		wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
@@ -551,7 +551,7 @@
 		bus-width = <4>;
 	};
 
-	sdhci@c8000600 {
+	mmc@c8000600 {
 		status = "okay";
 		bus-width = <8>;
 		non-removable;
@@ -569,17 +569,10 @@
 		backlight-boot-off;
 	};
 
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
+	clk32k_in: clock@0 {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
 	};
 
 	gpio-keys {
@@ -596,7 +589,7 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		wifi {
+		led-0 {
 			label = "wifi-led";
 			gpios = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "rfkill0";
@@ -613,30 +606,22 @@
 		backlight = <&backlight>;
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		p5valw_reg: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "+5valw";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
+	p5valw_reg: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "+5valw";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
 
-		vdd_pnl_reg: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "+3VS,vdd_pnl";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-boot-on;
-			gpio = <&gpio TEGRA_GPIO(A, 4) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	vdd_pnl_reg: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "+3VS,vdd_pnl";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(A, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 	};
 
 	sound {
diff --git a/arch/arm/boot/dts/tegra20-plutux.dts b/arch/arm/boot/dts/tegra20-plutux.dts
index 429e4605fbdb..378f23b2958b 100644
--- a/arch/arm/boot/dts/tegra20-plutux.dts
+++ b/arch/arm/boot/dts/tegra20-plutux.dts
@@ -60,44 +60,38 @@
 		clock-names = "pll_a", "pll_a_out0", "mclk";
 	};
 
-	regulators {
-		vcc_24v_reg: regulator@100 {
-			compatible = "regulator-fixed";
-			reg = <100>;
-			regulator-name = "vcc_24v";
-			regulator-min-microvolt = <24000000>;
-			regulator-max-microvolt = <24000000>;
-			regulator-always-on;
-		};
+	vcc_24v_reg: regulator@100 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_24v";
+		regulator-min-microvolt = <24000000>;
+		regulator-max-microvolt = <24000000>;
+		regulator-always-on;
+	};
 
-		vdd_5v0_reg: regulator@101 {
-			compatible = "regulator-fixed";
-			reg = <101>;
-			regulator-name = "vdd_5v0";
-			vin-supply = <&vcc_24v_reg>;
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
+	vdd_5v0_reg: regulator@101 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0";
+		vin-supply = <&vcc_24v_reg>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
 
-		vdd_3v3_reg: regulator@102 {
-			compatible = "regulator-fixed";
-			reg = <102>;
-			regulator-name = "vdd_3v3";
-			vin-supply = <&vcc_24v_reg>;
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
+	vdd_3v3_reg: regulator@102 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3";
+		vin-supply = <&vcc_24v_reg>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
 
-		vdd_1v8_reg: regulator@103 {
-			compatible = "regulator-fixed";
-			reg = <103>;
-			regulator-name = "vdd_1v8";
-			vin-supply = <&vdd_3v3_reg>;
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
+	vdd_1v8_reg: regulator@103 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v8";
+		vin-supply = <&vdd_3v3_reg>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
 	};
 };
diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts
index 376ecb6435f4..c24d4a37613e 100644
--- a/arch/arm/boot/dts/tegra20-seaboard.dts
+++ b/arch/arm/boot/dts/tegra20-seaboard.dts
@@ -394,10 +394,10 @@
 			#size-cells = <0>;
 
 			smart-battery@b {
-				compatible = "ti,bq20z75", "smart-battery-1.1";
+				compatible = "ti,bq20z75", "sbs,sbs-battery";
 				reg = <0xb>;
-				ti,i2c-retry-count = <2>;
-				ti,poll-retry-count = <10>;
+				sbs,i2c-retry-count = <2>;
+				sbs,poll-retry-count = <10>;
 			};
 		};
 	};
@@ -760,14 +760,14 @@
 		status = "okay";
 	};
 
-	sdhci@c8000000 {
+	mmc@c8000000 {
 		status = "okay";
 		power-gpios = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
 		bus-width = <4>;
 		keep-power-in-suspend;
 	};
 
-	sdhci@c8000400 {
+	mmc@c8000400 {
 		status = "okay";
 		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
 		wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
@@ -775,7 +775,7 @@
 		bus-width = <4>;
 	};
 
-	sdhci@c8000600 {
+	mmc@c8000600 {
 		status = "okay";
 		bus-width = <8>;
 		non-removable;
@@ -792,17 +792,10 @@
 		default-brightness-level = <6>;
 	};
 
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
+	clk32k_in: clock@0 {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
 	};
 
 	gpio-keys {
@@ -835,81 +828,68 @@
 		ddc-i2c-bus = <&lvds_ddc>;
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vdd_5v0_reg: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "vdd_5v0";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
+	vdd_5v0_reg: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
 
-		regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "vdd_1v5";
-			regulator-min-microvolt = <1500000>;
-			regulator-max-microvolt = <1500000>;
-			gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
-		};
+	regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v5";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+	};
 
-		regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "vdd_1v2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-		vbus_reg: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "vdd_vbus_wup1";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(D, 0) 0>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
+	vbus_reg: regulator@3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_vbus_wup1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(D, 0) 0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
 
-		vdd_pnl_reg: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "vdd_pnl";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	vdd_pnl_reg: regulator@4 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_pnl";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-		vdd_bl_reg: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			regulator-name = "vdd_bl";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	vdd_bl_reg: regulator@5 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_bl";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-		vdd_hdmi: regulator@6 {
-			compatible = "regulator-fixed";
-			reg = <6>;
-			regulator-name = "VDDIO_HDMI";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_5v0_reg>;
-		};
+	vdd_hdmi: regulator@6 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_HDMI";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_reg>;
 	};
 
 	sound {
diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi
index 20137fc578b1..95e6bccdb4f6 100644
--- a/arch/arm/boot/dts/tegra20-tamonten.dtsi
+++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi
@@ -495,40 +495,25 @@
 		status = "okay";
 	};
 
-	sdhci@c8000600 {
+	mmc@c8000600 {
 		cd-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_LOW>;
 		wp-gpios = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
 		bus-width = <4>;
 		status = "okay";
 	};
 
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
+	clk32k_in: clock@0 {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
 	};
 
-	regulators {
-		compatible = "simple-bus";
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		pci_vdd_reg: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "vdd_1v05";
-			regulator-min-microvolt = <1050000>;
-			regulator-max-microvolt = <1050000>;
-			gpio = <&pmic 2 0>;
-			enable-active-high;
-		};
+	pci_vdd_reg: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v05";
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1050000>;
+		gpio = <&pmic 2 0>;
+		enable-active-high;
 	};
 };
diff --git a/arch/arm/boot/dts/tegra20-tec.dts b/arch/arm/boot/dts/tegra20-tec.dts
index 4dec27737238..44ced60315de 100644
--- a/arch/arm/boot/dts/tegra20-tec.dts
+++ b/arch/arm/boot/dts/tegra20-tec.dts
@@ -69,44 +69,38 @@
 		clock-names = "pll_a", "pll_a_out0", "mclk";
 	};
 
-	regulators {
-		vcc_24v_reg: regulator@100 {
-			compatible = "regulator-fixed";
-			reg = <100>;
-			regulator-name = "vcc_24v";
-			regulator-min-microvolt = <24000000>;
-			regulator-max-microvolt = <24000000>;
-			regulator-always-on;
-		};
+	vcc_24v_reg: regulator@100 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_24v";
+		regulator-min-microvolt = <24000000>;
+		regulator-max-microvolt = <24000000>;
+		regulator-always-on;
+	};
 
-		vdd_5v0_reg: regulator@101 {
-			compatible = "regulator-fixed";
-			reg = <101>;
-			regulator-name = "vdd_5v0";
-			vin-supply = <&vcc_24v_reg>;
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
+	vdd_5v0_reg: regulator@101 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0";
+		vin-supply = <&vcc_24v_reg>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
 
-		vdd_3v3_reg: regulator@102 {
-			compatible = "regulator-fixed";
-			reg = <102>;
-			regulator-name = "vdd_3v3";
-			vin-supply = <&vcc_24v_reg>;
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
+	vdd_3v3_reg: regulator@102 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3";
+		vin-supply = <&vcc_24v_reg>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
 
-		vdd_1v8_reg: regulator@103 {
-			compatible = "regulator-fixed";
-			reg = <103>;
-			regulator-name = "vdd_1v8";
-			vin-supply = <&vdd_3v3_reg>;
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
+	vdd_1v8_reg: regulator@103 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v8";
+		vin-supply = <&vdd_3v3_reg>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
 	};
 };
diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts
index 8debd3d3c20d..4bc87bc0c2a4 100644
--- a/arch/arm/boot/dts/tegra20-trimslice.dts
+++ b/arch/arm/boot/dts/tegra20-trimslice.dts
@@ -366,30 +366,23 @@
 		status = "okay";
 	};
 
-	sdhci@c8000000 {
+	mmc@c8000000 {
 		status = "okay";
 		broken-cd;
 		bus-width = <4>;
 	};
 
-	sdhci@c8000600 {
+	mmc@c8000600 {
 		status = "okay";
 		cd-gpios = <&gpio TEGRA_GPIO(P, 1) GPIO_ACTIVE_LOW>;
 		wp-gpios = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
 		bus-width = <4>;
 	};
 
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
+	clk32k_in: clock@0 {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
 	};
 
 	gpio-keys {
@@ -408,58 +401,47 @@
 		gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		hdmi_vdd_reg: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "avdd_hdmi";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
+	hdmi_vdd_reg: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd_hdmi";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
 
-		hdmi_pll_reg: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "avdd_hdmi_pll";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
+	hdmi_pll_reg: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd_hdmi_pll";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
 
-		vbus_reg: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(V, 2) 0>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
+	vbus_reg: regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(V, 2) 0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
 
-		pci_clk_reg: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "pci_clk";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
+	pci_clk_reg: regulator@3 {
+		compatible = "regulator-fixed";
+		regulator-name = "pci_clk";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
 
-		pci_vdd_reg: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "pci_vdd";
-			regulator-min-microvolt = <1050000>;
-			regulator-max-microvolt = <1050000>;
-			regulator-always-on;
-		};
+	pci_vdd_reg: regulator@4 {
+		compatible = "regulator-fixed";
+		regulator-name = "pci_vdd";
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-always-on;
 	};
 
 	sound {
diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts
index 022649119821..b158771ac0b7 100644
--- a/arch/arm/boot/dts/tegra20-ventana.dts
+++ b/arch/arm/boot/dts/tegra20-ventana.dts
@@ -554,14 +554,14 @@
 		status = "okay";
 	};
 
-	sdhci@c8000000 {
+	mmc@c8000000 {
 		status = "okay";
 		power-gpios = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
 		bus-width = <4>;
 		keep-power-in-suspend;
 	};
 
-	sdhci@c8000400 {
+	mmc@c8000400 {
 		status = "okay";
 		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
 		wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
@@ -569,7 +569,7 @@
 		bus-width = <4>;
 	};
 
-	sdhci@c8000600 {
+	mmc@c8000600 {
 		status = "okay";
 		bus-width = <8>;
 		non-removable;
@@ -586,17 +586,10 @@
 		default-brightness-level = <6>;
 	};
 
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
+	clk32k_in: clock@0 {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
 	};
 
 	gpio-keys {
@@ -620,58 +613,47 @@
 		ddc-i2c-bus = <&lvds_ddc>;
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vdd_5v0_reg: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "vdd_5v0";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
+	vdd_5v0_reg: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
 
-		regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "vdd_1v5";
-			regulator-min-microvolt = <1500000>;
-			regulator-max-microvolt = <1500000>;
-			gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
-		};
+	regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v5";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+	};
 
-		regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "vdd_1v2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-		vdd_pnl_reg: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "vdd_pnl";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	vdd_pnl_reg: regulator@3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_pnl";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-		vdd_bl_reg: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "vdd_bl";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	vdd_bl_reg: regulator@4 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_bl";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 	};
 
 	sound {
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index c3b8ad53b967..72a4211a618f 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -17,25 +17,27 @@
 		reg = <0 0>;
 	};
 
-	iram@40000000 {
+	sram@40000000 {
 		compatible = "mmio-sram";
 		reg = <0x40000000 0x40000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x40000000 0x40000>;
 
-		vde_pool: vde@400 {
+		vde_pool: sram@400 {
 			reg = <0x400 0x3fc00>;
 			pool;
 		};
 	};
 
 	host1x@50000000 {
-		compatible = "nvidia,tegra20-host1x", "simple-bus";
+		compatible = "nvidia,tegra20-host1x";
 		reg = <0x50000000 0x00024000>;
 		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
 			     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */
+		interrupt-names = "syncpt", "host1x";
 		clocks = <&tegra_car TEGRA20_CLK_HOST1X>;
+		clock-names = "host1x";
 		resets = <&tegra_car 28>;
 		reset-names = "host1x";
 
@@ -154,7 +156,9 @@
 		dsi@54300000 {
 			compatible = "nvidia,tegra20-dsi";
 			reg = <0x54300000 0x00040000>;
-			clocks = <&tegra_car TEGRA20_CLK_DSI>;
+			clocks = <&tegra_car TEGRA20_CLK_DSI>,
+				 <&tegra_car TEGRA20_CLK_PLL_D_OUT0>;
+			clock-names = "dsi", "parent";
 			resets = <&tegra_car 48>;
 			reset-names = "dsi";
 			status = "disabled";
@@ -172,8 +176,8 @@
 
 	intc: interrupt-controller@50041000 {
 		compatible = "arm,cortex-a9-gic";
-		reg = <0x50041000 0x1000
-		       0x50040100 0x0100>;
+		reg = <0x50041000 0x1000>,
+		      <0x50040100 0x0100>;
 		interrupt-controller;
 		#interrupt-cells = <3>;
 		interrupt-parent = <&intc>;
@@ -272,15 +276,15 @@
 
 	vde@6001a000 {
 		compatible = "nvidia,tegra20-vde";
-		reg = <0x6001a000 0x1000   /* Syntax Engine */
-		       0x6001b000 0x1000   /* Video Bitstream Engine */
-		       0x6001c000  0x100   /* Macroblock Engine */
-		       0x6001c200  0x100   /* Post-processing Engine */
-		       0x6001c400  0x100   /* Motion Compensation Engine */
-		       0x6001c600  0x100   /* Transform Engine */
-		       0x6001c800  0x100   /* Pixel prediction block */
-		       0x6001ca00  0x100   /* Video DMA */
-		       0x6001d800  0x300>; /* Video frame controls */
+		reg = <0x6001a000 0x1000>, /* Syntax Engine */
+		      <0x6001b000 0x1000>, /* Video Bitstream Engine */
+		      <0x6001c000  0x100>, /* Macroblock Engine */
+		      <0x6001c200  0x100>, /* Post-processing Engine */
+		      <0x6001c400  0x100>, /* Motion Compensation Engine */
+		      <0x6001c600  0x100>, /* Transform Engine */
+		      <0x6001c800  0x100>, /* Pixel prediction block */
+		      <0x6001ca00  0x100>, /* Video DMA */
+		      <0x6001d800  0x300>; /* Video frame controls */
 		reg-names = "sxe", "bsev", "mbe", "ppe", "mce",
 			    "tfe", "ppb", "vdma", "frameid";
 		iram = <&vde_pool>; /* IRAM region */
@@ -295,16 +299,16 @@
 
 	apbmisc@70000800 {
 		compatible = "nvidia,tegra20-apbmisc";
-		reg = <0x70000800 0x64   /* Chip revision */
-		       0x70000008 0x04>; /* Strapping options */
+		reg = <0x70000800 0x64>, /* Chip revision */
+		      <0x70000008 0x04>; /* Strapping options */
 	};
 
 	pinmux: pinmux@70000014 {
 		compatible = "nvidia,tegra20-pinmux";
-		reg = <0x70000014 0x10   /* Tri-state registers */
-		       0x70000080 0x20   /* Mux registers */
-		       0x700000a0 0x14   /* Pull-up/down registers */
-		       0x70000868 0xa8>; /* Pad control registers */
+		reg = <0x70000014 0x10>, /* Tri-state registers */
+		      <0x70000080 0x20>, /* Mux registers */
+		      <0x700000a0 0x14>, /* Pull-up/down registers */
+		      <0x70000868 0xa8>; /* Pad control registers */
 	};
 
 	das@70000c00 {
@@ -619,8 +623,8 @@
 
 	mc: memory-controller@7000f000 {
 		compatible = "nvidia,tegra20-mc-gart";
-		reg = <0x7000f000 0x400		/* controller registers */
-		       0x58000000 0x02000000>;	/* GART aperture */
+		reg = <0x7000f000 0x00000400>, /* controller registers */
+		      <0x58000000 0x02000000>; /* GART aperture */
 		clocks = <&tegra_car TEGRA20_CLK_MC>;
 		clock-names = "mc";
 		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
@@ -649,12 +653,12 @@
 	pcie@80003000 {
 		compatible = "nvidia,tegra20-pcie";
 		device_type = "pci";
-		reg = <0x80003000 0x00000800   /* PADS registers */
-		       0x80003800 0x00000200   /* AFI registers */
-		       0x90000000 0x10000000>; /* configuration space */
+		reg = <0x80003000 0x00000800>, /* PADS registers */
+		      <0x80003800 0x00000200>, /* AFI registers */
+		      <0x90000000 0x10000000>; /* configuration space */
 		reg-names = "pads", "afi", "cs";
-		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH   /* controller interrupt */
-			      GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+			     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
 		interrupt-names = "intr", "msi";
 
 		#interrupt-cells = <1>;
@@ -665,11 +669,11 @@
 		#address-cells = <3>;
 		#size-cells = <2>;
 
-		ranges = <0x82000000 0 0x80000000 0x80000000 0 0x00001000   /* port 0 registers */
-			  0x82000000 0 0x80001000 0x80001000 0 0x00001000   /* port 1 registers */
-			  0x81000000 0 0          0x82000000 0 0x00010000   /* downstream I/O */
-			  0x82000000 0 0xa0000000 0xa0000000 0 0x08000000   /* non-prefetchable memory */
-			  0xc2000000 0 0xa8000000 0xa8000000 0 0x18000000>; /* prefetchable memory */
+		ranges = <0x02000000 0 0x80000000 0x80000000 0 0x00001000>, /* port 0 registers */
+			 <0x02000000 0 0x80001000 0x80001000 0 0x00001000>, /* port 1 registers */
+			 <0x01000000 0 0          0x82000000 0 0x00010000>, /* downstream I/O */
+			 <0x02000000 0 0xa0000000 0xa0000000 0 0x08000000>, /* non-prefetchable memory */
+			 <0x42000000 0 0xa8000000 0xa8000000 0 0x18000000>; /* prefetchable memory */
 
 		clocks = <&tegra_car TEGRA20_CLK_PEX>,
 			 <&tegra_car TEGRA20_CLK_AFI>,
@@ -726,7 +730,8 @@
 
 	phy1: usb-phy@c5000000 {
 		compatible = "nvidia,tegra20-usb-phy";
-		reg = <0xc5000000 0x4000 0xc5000000 0x4000>;
+		reg = <0xc5000000 0x4000>,
+		      <0xc5000000 0x4000>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA20_CLK_USBD>,
 			 <&tegra_car TEGRA20_CLK_PLL_U>,
@@ -735,6 +740,7 @@
 		clock-names = "reg", "pll_u", "timer", "utmi-pads";
 		resets = <&tegra_car 22>, <&tegra_car 22>;
 		reset-names = "usb", "utmi-pads";
+		#phy-cells = <0>;
 		nvidia,has-legacy-mode;
 		nvidia,hssync-start-delay = <9>;
 		nvidia,idle-wait-delay = <17>;
@@ -769,6 +775,7 @@
 		clock-names = "reg", "pll_u", "ulpi-link";
 		resets = <&tegra_car 58>, <&tegra_car 22>;
 		reset-names = "usb", "utmi-pads";
+		#phy-cells = <0>;
 		status = "disabled";
 	};
 
@@ -786,7 +793,8 @@
 
 	phy3: usb-phy@c5008000 {
 		compatible = "nvidia,tegra20-usb-phy";
-		reg = <0xc5008000 0x4000 0xc5000000 0x4000>;
+		reg = <0xc5008000 0x4000>,
+		      <0xc5000000 0x4000>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA20_CLK_USB3>,
 			 <&tegra_car TEGRA20_CLK_PLL_U>,
@@ -795,6 +803,7 @@
 		clock-names = "reg", "pll_u", "timer", "utmi-pads";
 		resets = <&tegra_car 59>, <&tegra_car 22>;
 		reset-names = "usb", "utmi-pads";
+		#phy-cells = <0>;
 		nvidia,hssync-start-delay = <9>;
 		nvidia,idle-wait-delay = <17>;
 		nvidia,elastic-limit = <16>;
@@ -805,41 +814,45 @@
 		status = "disabled";
 	};
 
-	sdhci@c8000000 {
+	mmc@c8000000 {
 		compatible = "nvidia,tegra20-sdhci";
 		reg = <0xc8000000 0x200>;
 		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA20_CLK_SDMMC1>;
+		clock-names = "sdhci";
 		resets = <&tegra_car 14>;
 		reset-names = "sdhci";
 		status = "disabled";
 	};
 
-	sdhci@c8000200 {
+	mmc@c8000200 {
 		compatible = "nvidia,tegra20-sdhci";
 		reg = <0xc8000200 0x200>;
 		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA20_CLK_SDMMC2>;
+		clock-names = "sdhci";
 		resets = <&tegra_car 9>;
 		reset-names = "sdhci";
 		status = "disabled";
 	};
 
-	sdhci@c8000400 {
+	mmc@c8000400 {
 		compatible = "nvidia,tegra20-sdhci";
 		reg = <0xc8000400 0x200>;
 		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA20_CLK_SDMMC3>;
+		clock-names = "sdhci";
 		resets = <&tegra_car 69>;
 		reset-names = "sdhci";
 		status = "disabled";
 	};
 
-	sdhci@c8000600 {
+	mmc@c8000600 {
 		compatible = "nvidia,tegra20-sdhci";
 		reg = <0xc8000600 0x200>;
 		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA20_CLK_SDMMC4>;
+		clock-names = "sdhci";
 		resets = <&tegra_car 15>;
 		reset-names = "sdhci";
 		status = "disabled";
diff --git a/arch/arm/boot/dts/tegra30-apalis-eval.dts b/arch/arm/boot/dts/tegra30-apalis-eval.dts
index b39c26806bf2..9f653ef41da4 100644
--- a/arch/arm/boot/dts/tegra30-apalis-eval.dts
+++ b/arch/arm/boot/dts/tegra30-apalis-eval.dts
@@ -120,7 +120,7 @@
 	};
 
 	/* Apalis SD1 */
-	sdhci@78000000 {
+	mmc@78000000 {
 		status = "okay";
 		bus-width = <4>;
 		/* SD1_CD# */
@@ -129,7 +129,7 @@
 	};
 
 	/* Apalis MMC1 */
-	sdhci@78000400 {
+	mmc@78000400 {
 		status = "okay";
 		bus-width = <8>;
 		/* MMC1_CD# */
diff --git a/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts b/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts
index e29dca92ba0a..86e138e8c7f0 100644
--- a/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts
+++ b/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts
@@ -121,7 +121,7 @@
 	};
 
 	/* Apalis SD1 */
-	sdhci@78000000 {
+	mmc@78000000 {
 		status = "okay";
 		bus-width = <4>;
 		/* SD1_CD# */
@@ -130,7 +130,7 @@
 	};
 
 	/* Apalis MMC1 */
-	sdhci@78000400 {
+	mmc@78000400 {
 		status = "okay";
 		bus-width = <8>;
 		/* MMC1_CD# */
@@ -248,8 +248,8 @@
 		regulator-max-microvolt = <3300000>;
 		regulator-type = "voltage";
 		gpios = <&gpio TEGRA_GPIO(J, 5) GPIO_ACTIVE_HIGH>;
-		states = <1800000 0x0
-			  3300000 0x1>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
 		startup-delay-us = <100000>;
 		vin-supply = <&vddio_sdmmc_1v8_reg>;
 	};
diff --git a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
index 387b17458e22..6a3a72f81c44 100644
--- a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
+++ b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
@@ -37,7 +37,7 @@
 			status = "okay";
 			nvidia,num-lanes = <1>;
 
-			pcie@0 {
+			ethernet@0,0 {
 				reg = <0 0 0 0 0>;
 				local-mac-address = [00 00 00 00 00 00];
 			};
@@ -855,6 +855,7 @@
 		sgtl5000: codec@a {
 			compatible = "fsl,sgtl5000";
 			reg = <0x0a>;
+			#sound-dai-cells = <0>;
 			VDDA-supply = <&reg_module_3v3_audio>;
 			VDDD-supply = <&reg_1v8_vio>;
 			VDDIO-supply = <&reg_module_3v3>;
@@ -1112,7 +1113,7 @@
 	};
 
 	/* eMMC */
-	sdhci@78000600 {
+	mmc@78000600 {
 		status = "okay";
 		bus-width = <8>;
 		non-removable;
diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi
index 6648506f3aa4..6544ce70b46f 100644
--- a/arch/arm/boot/dts/tegra30-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra30-apalis.dtsi
@@ -36,7 +36,7 @@
 			status = "okay";
 			nvidia,num-lanes = <1>;
 
-			pcie@0 {
+			ethernet@0,0 {
 				reg = <0 0 0 0 0>;
 				local-mac-address = [00 00 00 00 00 00];
 			};
@@ -846,6 +846,7 @@
 		sgtl5000: codec@a {
 			compatible = "fsl,sgtl5000";
 			reg = <0x0a>;
+			#sound-dai-cells = <0>;
 			VDDA-supply = <&reg_module_3v3_audio>;
 			VDDD-supply = <&reg_1v8_vio>;
 			VDDIO-supply = <&reg_module_3v3>;
@@ -1094,7 +1095,7 @@
 	};
 
 	/* eMMC */
-	sdhci@78000600 {
+	mmc@78000600 {
 		status = "okay";
 		bus-width = <8>;
 		non-removable;
diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-E1565.dts b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-E1565.dts
new file mode 100644
index 000000000000..a25b8560b0cd
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-E1565.dts
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-asus-nexus7-grouper-maxim-pmic.dtsi"
+#include "tegra30-asus-nexus7-grouper.dtsi"
+
+/ {
+	model = "ASUS Google Nexus 7 (Project Nakasi / ME370T) E1565";
+};
diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-PM269.dts b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-PM269.dts
new file mode 100644
index 000000000000..06ef13ea5df8
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-PM269.dts
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-asus-nexus7-grouper-ti-pmic.dtsi"
+#include "tegra30-asus-nexus7-grouper.dtsi"
+
+/ {
+	model = "ASUS Google Nexus 7 (Project Nakasi / ME370T) PM269";
+};
diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi
new file mode 100644
index 000000000000..3922517145e7
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi
@@ -0,0 +1,1232 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "tegra30.dtsi"
+#include "tegra30-cpu-opp.dtsi"
+#include "tegra30-cpu-opp-microvolt.dtsi"
+
+/ {
+	aliases {
+		rtc0 = &pmic;
+		rtc1 = "/rtc@7000e000";
+
+		serial1 = &uartc; /* Bluetooth */
+		serial2 = &uartb; /* GPS */
+	};
+
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		linux,cma@80000000 {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0x80000000 0x30000000>;
+			size = <0x10000000>; /* 256MiB */
+			linux,cma-default;
+			reusable;
+		};
+
+		ramoops@bfdf0000 {
+			compatible = "ramoops";
+			reg = <0xbfdf0000 0x10000>;	/* 64kB */
+			console-size = <0x8000>;	/* 32kB */
+			record-size = <0x400>;		/*  1kB */
+			ecc-size = <16>;
+		};
+
+		trustzone@bfe00000 {
+			reg = <0xbfe00000 0x200000>;
+			no-map;
+		};
+	};
+
+	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+
+				port@0 {
+					lcd_output: endpoint {
+						remote-endpoint = <&lvds_encoder_input>;
+						bus-width = <24>;
+					};
+				};
+			};
+		};
+	};
+
+	gpio@6000d000 {
+		init-mode {
+			gpio-hog;
+			gpios =	<TEGRA_GPIO(DD, 7) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(CC, 6) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
+			output-low;
+		};
+
+		init-low-power-mode {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
+			input;
+		};
+	};
+
+	pinmux@70000868 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			clk_32k_out_pa0 {
+				nvidia,pins = "clk_32k_out_pa0";
+				nvidia,function = "blink";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart3_cts_n_pa1 {
+				nvidia,pins = "uart3_cts_n_pa1",
+						"uart3_rxd_pw7";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap2_fs_pa2 {
+				nvidia,pins = "dap2_fs_pa2",
+						"dap2_sclk_pa3",
+						"dap2_din_pa4",
+						"dap2_dout_pa5";
+				nvidia,function = "i2s1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_clk_pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_cmd_pa7 {
+				nvidia,pins = "sdmmc3_cmd_pa7",
+						"sdmmc3_dat3_pb4",
+						"sdmmc3_dat2_pb5",
+						"sdmmc3_dat1_pb6",
+						"sdmmc3_dat0_pb7",
+						"sdmmc3_dat4_pd1",
+						"sdmmc3_dat6_pd3",
+						"sdmmc3_dat7_pd4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_a17_pb0 {
+				nvidia,pins = "gmi_a17_pb0",
+						"gmi_a18_pb1";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_pwr0_pb2 {
+				nvidia,pins = "lcd_pwr0_pb2",
+						"lcd_pwr1_pc1",
+						"lcd_m1_pw1";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_pclk_pb3 {
+				nvidia,pins = "lcd_pclk_pb3",
+						"lcd_d0_pe0",
+						"lcd_d1_pe1",
+						"lcd_d2_pe2",
+						"lcd_d3_pe3",
+						"lcd_d4_pe4",
+						"lcd_d5_pe5",
+						"lcd_d6_pe6",
+						"lcd_d7_pe7",
+						"lcd_d8_pf0",
+						"lcd_d9_pf1",
+						"lcd_d10_pf2",
+						"lcd_d11_pf3",
+						"lcd_d12_pf4",
+						"lcd_d13_pf5",
+						"lcd_d14_pf6",
+						"lcd_d15_pf7",
+						"lcd_de_pj1",
+						"lcd_hsync_pj3",
+						"lcd_vsync_pj4",
+						"lcd_d16_pm0",
+						"lcd_d17_pm1",
+						"lcd_d18_pm2",
+						"lcd_d19_pm3",
+						"lcd_d20_pm4",
+						"lcd_d21_pm5",
+						"lcd_d22_pm6",
+						"lcd_d23_pm7",
+						"lcd_cs0_n_pn4",
+						"lcd_sdout_pn5",
+						"lcd_dc0_pn6",
+						"lcd_cs1_n_pw0",
+						"lcd_sdin_pz2",
+						"lcd_sck_pz4";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			uart3_rts_n_pc0 {
+				nvidia,pins = "uart3_rts_n_pc0",
+						"uart3_txd_pw6";
+				nvidia,function = "uartc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_txd_pc2 {
+				nvidia,pins = "uart2_txd_pc2",
+						"uart2_rts_n_pj6";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			uart2_rxd_pc3 {
+				nvidia,pins = "uart2_rxd_pc3",
+						"uart2_cts_n_pj5";
+				nvidia,function = "uartb";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gen1_i2c_scl_pc4 {
+				nvidia,pins = "gen1_i2c_scl_pc4",
+						"gen1_i2c_sda_pc5";
+				nvidia,function = "i2c1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_wp_n_pc7 {
+				nvidia,pins = "gmi_wp_n_pc7",
+						"gmi_wait_pi7",
+						"gmi_cs4_n_pk2",
+						"gmi_cs3_n_pk4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad12_ph4 {
+				nvidia,pins = "gmi_ad12_ph4",
+						"gmi_cs0_n_pj0",
+						"gmi_cs1_n_pj2",
+						"gmi_cs2_n_pk3";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc3_dat5_pd0 {
+				nvidia,pins = "sdmmc3_dat5_pd0";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad0_pg0 {
+				nvidia,pins = "gmi_ad0_pg0",
+						"gmi_ad1_pg1",
+						"gmi_ad14_ph6",
+						"pu1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad2_pg2 {
+				nvidia,pins = "gmi_ad2_pg2",
+						"gmi_ad3_pg3",
+						"gmi_ad6_pg6",
+						"gmi_ad7_pg7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad4_pg4 {
+				nvidia,pins = "gmi_ad4_pg4",
+						"gmi_ad5_pg5";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_ad8_ph0 {
+				nvidia,pins = "gmi_ad8_ph0";
+				nvidia,function = "pwm0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad9_ph1 {
+				nvidia,pins = "gmi_ad9_ph1";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad10_ph2 {
+				nvidia,pins = "gmi_ad10_ph2";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad11_ph3 {
+				nvidia,pins = "gmi_ad11_ph3";
+				nvidia,function = "pwm3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad13_ph5 {
+				nvidia,pins = "gmi_ad13_ph5",
+						"gmi_wr_n_pi0",
+						"gmi_oe_n_pi1",
+						"gmi_adv_n_pk0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_ad15_ph7 {
+				nvidia,pins = "gmi_ad15_ph7";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_dqs_pi2 {
+				nvidia,pins = "gmi_dqs_pi2",
+						"pu2",
+						"pv1";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_rst_n_pi4 {
+				nvidia,pins = "gmi_rst_n_pi4";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_iordy_pi5 {
+				nvidia,pins = "gmi_iordy_pi5";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_cs7_n_pi6 {
+				nvidia,pins = "gmi_cs7_n_pi6",
+						"gmi_clk_pk1";
+				nvidia,function = "nand";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_a16_pj7 {
+				nvidia,pins = "gmi_a16_pj7",
+						"gmi_a19_pk7";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_out_pk5 {
+				nvidia,pins = "spdif_out_pk5";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spdif_in_pk6 {
+				nvidia,pins = "spdif_in_pk6";
+				nvidia,function = "spdif";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap1_fs_pn0 {
+				nvidia,pins = "dap1_fs_pn0",
+						"dap1_din_pn1",
+						"dap1_dout_pn2",
+						"dap1_sclk_pn3";
+				nvidia,function = "i2s0";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			hdmi_int_pn7 {
+				nvidia,pins = "hdmi_int_pn7";
+				nvidia,function = "hdmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_data7_po0 {
+				nvidia,pins = "ulpi_data7_po0";
+				nvidia,function = "uarta";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_data3_po4 {
+				nvidia,pins = "ulpi_data3_po4";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap3_fs_pp0 {
+				nvidia,pins = "dap3_fs_pp0";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			dap4_fs_pp4 {
+				nvidia,pins = "dap4_fs_pp4",
+						"dap4_din_pp5",
+						"dap4_dout_pp6",
+						"dap4_sclk_pp7";
+				nvidia,function = "i2s3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col0_pq0 {
+				nvidia,pins = "kb_col0_pq0",
+						"kb_col1_pq1",
+						"kb_row1_pr1";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_col2_pq2 {
+				nvidia,pins = "kb_col2_pq2",
+						"kb_col3_pq3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_col4_pq4 {
+				nvidia,pins = "kb_col4_pq4",
+						"kb_col5_pq5",
+						"kb_col7_pq7",
+						"kb_row2_pr2",
+						"kb_row4_pr4",
+						"kb_row5_pr5",
+						"kb_row14_ps6";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row0_pr0 {
+				nvidia,pins = "kb_row0_pr0";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row6_pr6 {
+				nvidia,pins = "kb_row6_pr6",
+						"kb_row8_ps0",
+						"kb_row9_ps1",
+						"kb_row10_ps2";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row11_ps3 {
+				nvidia,pins = "kb_row11_ps3",
+						"kb_row12_ps4";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gen2_i2c_scl_pt5 {
+				nvidia,pins = "gen2_i2c_scl_pt5",
+						"gen2_i2c_sda_pt6";
+				nvidia,function = "i2c2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_cmd_pt7 {
+				nvidia,pins = "sdmmc4_cmd_pt7",
+						"sdmmc4_dat0_paa0",
+						"sdmmc4_dat1_paa1",
+						"sdmmc4_dat2_paa2",
+						"sdmmc4_dat3_paa3",
+						"sdmmc4_dat4_paa4",
+						"sdmmc4_dat5_paa5",
+						"sdmmc4_dat6_paa6",
+						"sdmmc4_dat7_paa7";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu0 {
+				nvidia,pins = "pu0",
+						"pu6";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			jtag_rtck_pu7 {
+				nvidia,pins = "jtag_rtck_pu7";
+				nvidia,function = "rtck";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pv0 {
+				nvidia,pins = "pv0";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ddc_scl_pv4 {
+				nvidia,pins = "ddc_scl_pv4",
+						"ddc_sda_pv5";
+				nvidia,function = "i2c4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			crt_hsync_pv6 {
+				nvidia,pins = "crt_hsync_pv6",
+						"crt_vsync_pv7";
+				nvidia,function = "crt";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_cs1_n_pw2 {
+				nvidia,pins = "spi2_cs1_n_pw2",
+						"spi2_miso_px1",
+						"spi2_sck_px2";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk1_out_pw4 {
+				nvidia,pins = "clk1_out_pw4";
+				nvidia,function = "extperiph1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk2_out_pw5 {
+				nvidia,pins = "clk2_out_pw5";
+				nvidia,function = "extperiph2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			spi2_cs0_n_px3 {
+				nvidia,pins = "spi2_cs0_n_px3";
+				nvidia,function = "spi6";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			spi1_mosi_px4 {
+				nvidia,pins = "spi1_mosi_px4",
+						"spi1_cs0_n_px6";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_clk_py0 {
+				nvidia,pins = "ulpi_clk_py0",
+						"ulpi_dir_py1";
+				nvidia,function = "ulpi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			sdmmc1_dat3_py4 {
+				nvidia,pins = "sdmmc1_dat3_py4",
+						"sdmmc1_dat2_py5",
+						"sdmmc1_dat1_py6",
+						"sdmmc1_dat0_py7",
+						"sdmmc1_cmd_pz1";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc1_clk_pz0 {
+				nvidia,pins = "sdmmc1_clk_pz0";
+				nvidia,function = "sdmmc1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_wr_n_pz3 {
+				nvidia,pins = "lcd_wr_n_pz3";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sys_clk_req_pz5 {
+				nvidia,pins = "sys_clk_req_pz5";
+				nvidia,function = "sysclk";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pwr_i2c_scl_pz6 {
+				nvidia,pins = "pwr_i2c_scl_pz6",
+						"pwr_i2c_sda_pz7";
+				nvidia,function = "i2cpwr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			pbb0 {
+				nvidia,pins = "pbb0",
+						"pcc1";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			cam_i2c_scl_pbb1 {
+				nvidia,pins = "cam_i2c_scl_pbb1",
+						"cam_i2c_sda_pbb2";
+				nvidia,function = "i2c3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_ENABLE>;
+			};
+			pbb3 {
+				nvidia,pins = "pbb3";
+				nvidia,function = "vgp3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb4 {
+				nvidia,pins = "pbb4";
+				nvidia,function = "vgp4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb5 {
+				nvidia,pins = "pbb5";
+				nvidia,function = "vgp5";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb6 {
+				nvidia,pins = "pbb6";
+				nvidia,function = "vgp6";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pbb7 {
+				nvidia,pins = "pbb7",
+						"pcc2";
+				nvidia,function = "i2s4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			cam_mclk_pcc0 {
+				nvidia,pins = "cam_mclk_pcc0";
+				nvidia,function = "vi_alt3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_rst_n_pcc3 {
+				nvidia,pins = "sdmmc4_rst_n_pcc3";
+				nvidia,function = "rsvd2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			sdmmc4_clk_pcc4 {
+				nvidia,pins = "sdmmc4_clk_pcc4";
+				nvidia,function = "sdmmc4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk2_req_pcc5 {
+				nvidia,pins = "clk2_req_pcc5";
+				nvidia,function = "dap";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pex_l2_rst_n_pcc6 {
+				nvidia,pins = "pex_l2_rst_n_pcc6",
+						"pex_l2_clkreq_n_pcc7";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pex_wake_n_pdd3 {
+				nvidia,pins = "pex_wake_n_pdd3",
+						"pex_l2_prsnt_n_pdd7";
+				nvidia,function = "pcie";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			clk3_out_pee0 {
+				nvidia,pins = "clk3_out_pee0";
+				nvidia,function = "extperiph3";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk1_req_pee2 {
+				nvidia,pins = "clk1_req_pee2";
+				nvidia,function = "dap";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			hdmi_cec_pee3 {
+				nvidia,pins = "hdmi_cec_pee3";
+				nvidia,function = "cec";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+				nvidia,open-drain = <TEGRA_PIN_DISABLE>;
+			};
+			owr {
+				nvidia,pins = "owr";
+				nvidia,function = "owr";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			drive_dap1 {
+				nvidia,pins = "drive_dap1",
+						"drive_dap2",
+						"drive_dbg",
+						"drive_at5",
+						"drive_gme",
+						"drive_ddc",
+						"drive_ao1",
+						"drive_uart3";
+				nvidia,high-speed-mode = <0>;
+				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,pull-up-strength = <31>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>;
+			};
+			drive_sdio1 {
+				nvidia,pins = "drive_sdio1",
+						"drive_sdio3";
+				nvidia,high-speed-mode = <0>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,pull-down-strength = <46>;
+				nvidia,pull-up-strength = <42>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FAST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FAST>;
+			};
+			drive_gma {
+				nvidia,pins = "drive_gma",
+						"drive_gmb",
+						"drive_gmc",
+						"drive_gmd";
+				nvidia,pull-down-strength = <9>;
+				nvidia,pull-up-strength = <9>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+			};
+		};
+	};
+
+	uartb: serial@70006040 {
+		compatible = "nvidia,tegra30-hsuart";
+		/* GPS BCM4751 */
+	};
+
+	uartc: serial@70006200 {
+		compatible = "nvidia,tegra30-hsuart";
+		status = "okay";
+
+		nvidia,adjust-baud-rates = <0 9600 100>,
+					   <9600 115200 200>,
+					   <1000000 4000000 136>;
+
+		/* Azurewave AW-NH665 BCM4330B1 */
+		bluetooth {
+			compatible = "brcm,bcm4330-bt";
+
+			max-speed = <4000000>;
+
+			clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+			clock-names = "txco";
+
+			vbat-supply  = <&vdd_3v3_sys>;
+			vddio-supply = <&vdd_1v8>;
+
+			device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;
+			host-wakeup-gpios =   <&gpio TEGRA_GPIO(U, 6) GPIO_ACTIVE_HIGH>;
+			shutdown-gpios =      <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	pwm: pwm@7000a000 {
+		status = "okay";
+	};
+
+	i2c@7000c400 {
+		clock-frequency = <400000>;
+		status = "okay";
+	};
+
+	i2c@7000c500 {
+		clock-frequency = <100000>;
+		status = "okay";
+
+		compass@e {
+			compatible = "asahi-kasei,ak8974";
+			reg = <0x0e>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(W, 0) IRQ_TYPE_EDGE_RISING>;
+
+			avdd-supply = <&vdd_3v3_sys>;
+			dvdd-supply = <&vdd_1v8>;
+
+			mount-matrix =	 "0", "-1",  "0",
+					"-1",  "0",  "0",
+					 "0",  "0", "-1";
+		};
+
+		light-sensor@1c {
+			compatible = "dynaimage,al3010";
+			reg = <0x1c>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(Z, 2) IRQ_TYPE_LEVEL_HIGH>;
+
+			vdd-supply = <&vdd_3v3_sys>;
+		};
+
+		accelerometer@68 {
+			compatible = "invensense,mpu6050";
+			reg = <0x68>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 1) IRQ_TYPE_EDGE_RISING>;
+
+			vdd-supply   = <&vdd_3v3_sys>;
+			vddio-supply = <&vdd_1v8>;
+
+			mount-matrix =	 "0", "-1",  "0",
+					"-1",  "0",  "0",
+					 "0",  "0", "-1";
+		};
+	};
+
+	i2c@7000d000 {
+		clock-frequency = <100000>;
+		status = "okay";
+
+		rt5640: audio-codec@1c {
+			compatible = "realtek,rt5640";
+			reg = <0x1c>;
+
+			realtek,dmic1-data-pin = <1>;
+		};
+
+		nct72: temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+			vcc-supply = <&vdd_3v3_sys>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		battery@55 {
+			compatible = "ti,bq27541";
+			reg = <0x55>;
+		};
+	};
+
+	pmc@7000e400 {
+		status = "okay";
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <2000>;
+		nvidia,cpu-pwr-off-time = <200>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <0>;
+		nvidia,core-power-req-active-high;
+		nvidia,sys-clock-req-active-high;
+	};
+
+	ahub@70080000 {
+		i2s@70080400 {
+			status = "okay";
+		};
+	};
+
+	brcm_wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+
+		clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+		clock-names = "ext_clock";
+
+		reset-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <300>;
+		power-off-delay-us = <300>;
+	};
+
+	mmc@78000400 {
+		status = "okay";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		keep-power-in-suspend;
+		bus-width = <4>;
+		non-removable;
+
+		mmc-pwrseq = <&brcm_wifi_pwrseq>;
+		vmmc-supply = <&vdd_3v3_sys>;
+		vqmmc-supply = <&vdd_1v8>;
+
+		/* Azurewave AW-NH665 BCM4330 */
+		wifi@1 {
+			reg = <1>;
+			compatible = "brcm,bcm4329-fmac";
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(O, 4) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host-wake";
+		};
+	};
+
+	mmc@78000600 {
+		status = "okay";
+		bus-width = <8>;
+		vmmc-supply = <&vcore_emmc>;
+		vqmmc-supply = <&vdd_1v8>;
+		non-removable;
+	};
+
+	usb@7d000000 {
+		compatible = "nvidia,tegra30-udc";
+		status = "okay";
+		dr_mode = "peripheral";
+	};
+
+	usb-phy@7d000000 {
+		status = "okay";
+		dr_mode = "peripheral";
+		nvidia,hssync-start-delay = <0>;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		power-supply = <&vdd_5v0_sys>;
+		pwms = <&pwm 0 50000>;
+
+		brightness-levels = <1 255>;
+		num-interpolated-steps = <254>;
+		default-brightness-level = <15>;
+	};
+
+	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
+	clk32k_in: clock@0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "pmic-oscillator";
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu@1 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu@2 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu@3 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+	};
+
+	display-panel {
+		compatible = "hydis,hv070wx2-1e0", "chunghwa,claa070wp03xg",
+			     "panel-lvds";
+
+		power-supply = <&vdd_pnl>;
+		backlight = <&backlight>;
+
+		width-mm = <94>;
+		height-mm = <150>;
+		rotation = <180>;
+
+		data-mapping = "jeida-24";
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&lvds_encoder_output>;
+			};
+		};
+	};
+
+	firmware {
+		trusted-foundations {
+			compatible = "tlm,trusted-foundations";
+			tlm,version-major = <0x0>;
+			tlm,version-minor = <0x0>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		hall-sensor {
+			label = "Lid";
+			gpios = <&gpio TEGRA_GPIO(S, 6) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			debounce-interval = <500>;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+			wakeup-source;
+		};
+
+		power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(Q, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	lvds-encoder {
+		compatible = "ti,sn75lvds83", "lvds-encoder";
+
+		powerdown-gpios = <&gpio TEGRA_GPIO(N, 6) GPIO_ACTIVE_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_encoder_input: endpoint {
+					remote-endpoint = <&lcd_output>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_encoder_output: endpoint {
+					remote-endpoint = <&panel_input>;
+				};
+			};
+		};
+	};
+
+	vdd_5v0_sys: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_3v3_sys: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_pnl: regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_panel";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-enable-ramp-delay = <300000>;
+		gpio = <&gpio TEGRA_GPIO(W, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vcc_3v3_ts: regulator@3 {
+		compatible = "regulator-fixed";
+		regulator-name = "ldo_s-1167_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	sound {
+		compatible = "nvidia,tegra-audio-rt5640-grouper",
+			     "nvidia,tegra-audio-rt5640";
+		nvidia,model = "ASUS Google Nexus 7 ALC5642";
+
+		nvidia,audio-routing =
+			"Headphones", "HPOR",
+			"Headphones", "HPOL",
+			"Speakers", "SPORP",
+			"Speakers", "SPORN",
+			"Speakers", "SPOLP",
+			"Speakers", "SPOLN",
+			"DMIC1", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&rt5640>;
+
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+
+		clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
+			 <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+			 <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+
+		assigned-clocks = <&tegra_car TEGRA30_CLK_EXTERN1>,
+				  <&tegra_pmc TEGRA_PMC_CLK_OUT_1>;
+
+		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
+					 <&tegra_car TEGRA30_CLK_EXTERN1>;
+	};
+
+	thermal-zones {
+		nct72-local {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <0>; /* milliseconds */
+
+			thermal-sensors = <&nct72 0>;
+		};
+
+		nct72-remote {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct72 1>;
+
+			trips {
+				trip0: cpu-alert0 {
+					/* start throttling at 50C */
+					temperature = <50000>;
+					hysteresis = <3000>;
+					type = "passive";
+				};
+
+				trip1: cpu-crit {
+					/* shut down at 60C */
+					temperature = <60000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&trip0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-maxim-pmic.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-maxim-pmic.dtsi
new file mode 100644
index 000000000000..b25b3fa90ac6
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-maxim-pmic.dtsi
@@ -0,0 +1,185 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/max77620.h>
+
+/ {
+	i2c@7000d000 {
+		pmic: pmic@3c {
+			compatible = "maxim,max77663";
+			reg = <0x3c>;
+
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			system-power-controller;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&max77620_default>;
+
+			max77620_default: pinmux {
+				gpio4 {
+					pins = "gpio4";
+					function = "32k-out1";
+				};
+			};
+
+			cpu-pwr-req {
+				gpio-hog;
+				gpios = <6 GPIO_ACTIVE_HIGH>;
+				input;
+			};
+
+			fps {
+				fps0 {
+					maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+				};
+
+				fps1 {
+					maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
+				};
+
+				fps2 {
+					maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+				};
+			};
+
+			regulators {
+				in-sd0-supply = <&vdd_5v0_sys>;
+				in-sd1-supply = <&vdd_5v0_sys>;
+				in-sd2-supply = <&vdd_5v0_sys>;
+				in-sd3-supply = <&vdd_5v0_sys>;
+				in-sd4-supply = <&vdd_5v0_sys>;
+
+				in-ldo0-1-supply = <&vdd_1v35>;
+				in-ldo2-supply   = <&vdd_3v3_sys>;
+				in-ldo3-5-supply = <&vdd_3v3_sys>;
+				in-ldo4-6-supply = <&vdd_5v0_sys>;
+				in-ldo7-8-supply = <&vdd_1v35>;
+
+				vdd_cpu: sd0 {
+					regulator-name = "vdd_cpu";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-coupled-with = <&vdd_core>;
+					regulator-coupled-max-spread = <300000>;
+					regulator-max-step-microvolt = <100000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					nvidia,tegra-cpu-regulator;
+				};
+
+				vdd_core: sd1 {
+					regulator-name = "vdd_core";
+					regulator-min-microvolt = <950000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-coupled-with = <&vdd_cpu>;
+					regulator-coupled-max-spread = <300000>;
+					regulator-max-step-microvolt = <100000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					nvidia,tegra-core-regulator;
+				};
+
+				vdd_1v8: sd2 {
+					regulator-name = "vdd_gen1v8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_1v35: sd3 {
+					regulator-name = "vdd_ddr3l_1v35";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo0 {
+					regulator-name = "vdd_ddr_hs";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo2 {
+					regulator-name = "vdd_ddr_rx";
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vcore_emmc: ldo3 {
+					regulator-name = "vcore_emmc";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <3100000>;
+					regulator-always-on;
+				};
+
+				ldo4 {
+					regulator-name = "vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo5 {
+					regulator-name = "vdd_camera";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo6 {
+					regulator-name = "vddio_sdmmc";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo7 {
+					regulator-name = "avdd_dsi_csi";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo8 {
+					regulator-name = "avdd_pll";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+			};
+		};
+	};
+
+	vdd_3v3_sys: regulator@1 {
+		gpio = <&pmic 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	regulator@4 {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd_usb";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+};
diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-memory-timings.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-memory-timings.dtsi
new file mode 100644
index 000000000000..bc0f6f29b956
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-memory-timings.dtsi
@@ -0,0 +1,1565 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	memory-controller@7000f000 {
+		emc-timings-0 {
+			nvidia,ram-code = <0>; /* Elpida EDJ2108EDBG-DJL-F */
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = <
+					0x00020001 /* MC_EMEM_ARB_CFG */
+					0xc0000020 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000001 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
+					0x74830303 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = <
+					0x00010001 /* MC_EMEM_ARB_CFG */
+					0xc0000020 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000001 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
+					0x73430303 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = <
+					0x00000001 /* MC_EMEM_ARB_CFG */
+					0xc0000030 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000001 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0503 /* MC_EMEM_ARB_DA_COVERS */
+					0x72830504 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = <
+					0x00000003 /* MC_EMEM_ARB_CFG */
+					0xc0000025 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000003 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0505 /* MC_EMEM_ARB_DA_COVERS */
+					0x72440a06 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emem-configuration = <
+					0x00000005 /* MC_EMEM_ARB_CFG */
+					0xc000003d /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000008 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000004 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000007 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030202 /* MC_EMEM_ARB_DA_TURNS */
+					0x000b0608 /* MC_EMEM_ARB_DA_COVERS */
+					0x70850f09 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emem-configuration = <
+					0x0000000a /* MC_EMEM_ARB_CFG */
+					0xc0000079 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000010 /* MC_EMEM_ARB_TIMING_RC */
+					0x0000000b /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000a /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x0000000b /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000008 /* MC_EMEM_ARB_TIMING_W2R */
+					0x08040202 /* MC_EMEM_ARB_DA_TURNS */
+					0x00130b10 /* MC_EMEM_ARB_DA_COVERS */
+					0x70ea1f11 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+		};
+
+		emc-timings-1 {
+			nvidia,ram-code = <1>; /* Hynix H5TC2G83CFR */
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emem-configuration = <
+					0x00020001 /* MC_EMEM_ARB_CFG */
+					0xc0000020 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000001 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
+					0x74830303 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emem-configuration = <
+					0x00010001 /* MC_EMEM_ARB_CFG */
+					0xc0000020 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000001 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0502 /* MC_EMEM_ARB_DA_COVERS */
+					0x73430303 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emem-configuration = <
+					0x00000001 /* MC_EMEM_ARB_CFG */
+					0xc0000030 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000001 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0503 /* MC_EMEM_ARB_DA_COVERS */
+					0x72830504 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emem-configuration = <
+					0x00000003 /* MC_EMEM_ARB_CFG */
+					0xc0000025 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000005 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000003 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000001 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06020102 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0505 /* MC_EMEM_ARB_DA_COVERS */
+					0x72440a06 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emem-configuration = <
+					0x00000005 /* MC_EMEM_ARB_CFG */
+					0xc000003d /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000008 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000004 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000007 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030202 /* MC_EMEM_ARB_DA_TURNS */
+					0x000b0608 /* MC_EMEM_ARB_DA_COVERS */
+					0x70850f09 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emem-configuration = <
+					0x0000000a /* MC_EMEM_ARB_CFG */
+					0xc0000079 /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000004 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000010 /* MC_EMEM_ARB_TIMING_RC */
+					0x0000000b /* MC_EMEM_ARB_TIMING_RAS */
+					0x0000000a /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000003 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x0000000b /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000002 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000004 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000008 /* MC_EMEM_ARB_TIMING_W2R */
+					0x08040202 /* MC_EMEM_ARB_DA_TURNS */
+					0x00130b10 /* MC_EMEM_ARB_DA_COVERS */
+					0x70ea1f11 /* MC_EMEM_ARB_MISC0 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+		};
+	};
+
+	memory-controller@7000f400 {
+		emc-timings-0 {
+			nvidia,ram-code = <0>; /* Elpida EDJ2108EDBG-DJL-F */
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration = <
+					0x00000001 /* EMC_RC */
+					0x00000004 /* EMC_RFC */
+					0x00000000 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x000000c0 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000030 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000005 /* EMC_TXSR */
+					0x00000005 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000001 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x000000c7 /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x007800a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x000fc000 /* EMC_DLL_XFORM_DQS0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS3 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS4 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS5 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS6 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00000000 /* EMC_ZCAL_INTERVAL */
+					0x00000040 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x80000287 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration = <
+					0x00000002 /* EMC_RC */
+					0x00000008 /* EMC_RFC */
+					0x00000001 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x00000181 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000060 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000009 /* EMC_TXSR */
+					0x00000009 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000002 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x0000018e /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x007800a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x000fc000 /* EMC_DLL_XFORM_DQS0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS3 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS4 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS5 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS6 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00000000 /* EMC_ZCAL_INTERVAL */
+					0x00000040 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x8000040b /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration = <
+					0x00000005 /* EMC_RC */
+					0x00000010 /* EMC_RFC */
+					0x00000003 /* EMC_RAS */
+					0x00000001 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000001 /* EMC_RD_RCD */
+					0x00000001 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x00000303 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x000000c0 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000012 /* EMC_TXSR */
+					0x00000012 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000004 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x0000031c /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x007800a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x000fc000 /* EMC_DLL_XFORM_DQS0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS3 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS4 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS5 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS6 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00000000 /* EMC_ZCAL_INTERVAL */
+					0x00000040 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x80000713 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration = <
+					0x0000000a /* EMC_RC */
+					0x00000020 /* EMC_RFC */
+					0x00000007 /* EMC_RAS */
+					0x00000002 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000002 /* EMC_RD_RCD */
+					0x00000002 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x00000607 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000181 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000023 /* EMC_TXSR */
+					0x00000023 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000007 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000638 /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000006 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x004400a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00080000 /* EMC_DLL_XFORM_DQS0 */
+					0x00080000 /* EMC_DLL_XFORM_DQS1 */
+					0x00080000 /* EMC_DLL_XFORM_DQS2 */
+					0x00080000 /* EMC_DLL_XFORM_DQS3 */
+					0x00080000 /* EMC_DLL_XFORM_DQS4 */
+					0x00080000 /* EMC_DLL_XFORM_DQS5 */
+					0x00080000 /* EMC_DLL_XFORM_DQS6 */
+					0x00080000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00080000 /* EMC_DLL_XFORM_DQ0 */
+					0x00080000 /* EMC_DLL_XFORM_DQ1 */
+					0x00080000 /* EMC_DLL_XFORM_DQ2 */
+					0x00080000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x80000d22 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-reset = <0x80000321>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration = <
+					0x0000000f /* EMC_RC */
+					0x00000034 /* EMC_RFC */
+					0x0000000a /* EMC_RAS */
+					0x00000003 /* EMC_RP */
+					0x00000003 /* EMC_R2W */
+					0x00000008 /* EMC_W2R */
+					0x00000002 /* EMC_R2P */
+					0x00000009 /* EMC_W2P */
+					0x00000003 /* EMC_RD_RCD */
+					0x00000003 /* EMC_WR_RCD */
+					0x00000002 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000004 /* EMC_WDV */
+					0x00000006 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000c /* EMC_RDV */
+					0x000009e9 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x0000027a /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000001 /* EMC_PDEX2WR */
+					0x00000008 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000e /* EMC_RW2PDEN */
+					0x00000039 /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x0000000a /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000a2a /* EMC_TREFBW */
+					0x00000000 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00007088 /* EMC_FBIO_CFG5 */
+					0x002600a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x0003c000 /* EMC_DLL_XFORM_DQS0 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS1 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS2 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS3 */
+					0x00014000 /* EMC_DLL_XFORM_DQS4 */
+					0x00014000 /* EMC_DLL_XFORM_DQS5 */
+					0x00014000 /* EMC_DLL_XFORM_DQS6 */
+					0x00014000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00048000 /* EMC_DLL_XFORM_DQ0 */
+					0x00048000 /* EMC_DLL_XFORM_DQ1 */
+					0x00048000 /* EMC_DLL_XFORM_DQ2 */
+					0x00048000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800013d /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f508 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x080001e8 /* EMC_XM2QUSEPADCTRL */
+					0x08000021 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x018b000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x800014d4 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff89 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200018>;
+				nvidia,emc-mode-reset = <0x80000b71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration = <
+					0x0000001f /* EMC_RC */
+					0x00000069 /* EMC_RFC */
+					0x00000017 /* EMC_RAS */
+					0x00000007 /* EMC_RP */
+					0x00000005 /* EMC_R2W */
+					0x0000000c /* EMC_W2R */
+					0x00000003 /* EMC_R2P */
+					0x00000011 /* EMC_W2P */
+					0x00000007 /* EMC_RD_RCD */
+					0x00000007 /* EMC_WR_RCD */
+					0x00000002 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000007 /* EMC_WDV */
+					0x0000000b /* EMC_QUSE */
+					0x00000009 /* EMC_QRST */
+					0x0000000b /* EMC_QSAFE */
+					0x00000011 /* EMC_RDV */
+					0x00001412 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000504 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x0000000e /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x0000000c /* EMC_AR2PDEN */
+					0x00000016 /* EMC_RW2PDEN */
+					0x00000072 /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000005 /* EMC_TCKE */
+					0x00000015 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000006 /* EMC_TCLKSTABLE */
+					0x00000007 /* EMC_TCLKSTOP */
+					0x00001453 /* EMC_TREFBW */
+					0x0000000c /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00005088 /* EMC_FBIO_CFG5 */
+					0xf00b0191 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00000008 /* EMC_DLL_XFORM_DQS0 */
+					0x00000008 /* EMC_DLL_XFORM_DQS1 */
+					0x00000008 /* EMC_DLL_XFORM_DQS2 */
+					0x00000008 /* EMC_DLL_XFORM_DQS3 */
+					0x0000000a /* EMC_DLL_XFORM_DQS4 */
+					0x0000000a /* EMC_DLL_XFORM_DQS5 */
+					0x0000000a /* EMC_DLL_XFORM_DQS6 */
+					0x0000000a /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x0000000c /* EMC_DLL_XFORM_DQ0 */
+					0x0000000c /* EMC_DLL_XFORM_DQ1 */
+					0x0000000c /* EMC_DLL_XFORM_DQ2 */
+					0x0000000c /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0600013d /* EMC_XM2DQSPADCTRL2 */
+					0x22220000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f501 /* EMC_XM2COMPPADCTRL */
+					0x07077404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000000 /* EMC_XM2VTTGENPADCTRL2 */
+					0x080001e8 /* EMC_XM2QUSEPADCTRL */
+					0x0a000021 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x0156000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x800028a5 /* EMC_DYN_SELF_REF_CONTROL */
+					0xf8000000 /* EMC_FBIO_SPARE */
+					0xff00ff49 /* EMC_CFG_RSV */
+				>;
+			};
+		};
+
+		emc-timings-1 {
+			nvidia,ram-code = <1>; /* Hynix H5TC2G83CFR */
+
+			timing-25500000 {
+				clock-frequency = <25500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration = <
+					0x00000001 /* EMC_RC */
+					0x00000004 /* EMC_RFC */
+					0x00000000 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x000000c0 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000030 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000005 /* EMC_TXSR */
+					0x00000005 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000001 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x000000c7 /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x007800a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x000fc000 /* EMC_DLL_XFORM_DQS0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS3 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS4 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS5 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS6 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00000000 /* EMC_ZCAL_INTERVAL */
+					0x00000040 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x80000287 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-51000000 {
+				clock-frequency = <51000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration = <
+					0x00000002 /* EMC_RC */
+					0x00000008 /* EMC_RFC */
+					0x00000001 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x00000181 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000060 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000009 /* EMC_TXSR */
+					0x00000009 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000002 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x0000018e /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x007800a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x000fc000 /* EMC_DLL_XFORM_DQS0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS3 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS4 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS5 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS6 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00000000 /* EMC_ZCAL_INTERVAL */
+					0x00000040 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x8000040b /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-102000000 {
+				clock-frequency = <102000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration = <
+					0x00000005 /* EMC_RC */
+					0x00000010 /* EMC_RFC */
+					0x00000003 /* EMC_RAS */
+					0x00000001 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000001 /* EMC_RD_RCD */
+					0x00000001 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x00000303 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x000000c0 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000012 /* EMC_TXSR */
+					0x00000012 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000004 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x0000031c /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x007800a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x000fc000 /* EMC_DLL_XFORM_DQS0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS3 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS4 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS5 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS6 */
+					0x000fc000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00000000 /* EMC_ZCAL_INTERVAL */
+					0x00000040 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x80000713 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-204000000 {
+				clock-frequency = <204000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-dyn-self-ref;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration = <
+					0x0000000a /* EMC_RC */
+					0x00000020 /* EMC_RFC */
+					0x00000007 /* EMC_RAS */
+					0x00000002 /* EMC_RP */
+					0x00000002 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000005 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000002 /* EMC_RD_RCD */
+					0x00000002 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000005 /* EMC_WDV */
+					0x00000005 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000b /* EMC_RDV */
+					0x00000607 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000181 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000023 /* EMC_TXSR */
+					0x00000023 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000007 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000638 /* EMC_TREFBW */
+					0x00000006 /* EMC_QUSE_EXTRA */
+					0x00000006 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00004288 /* EMC_FBIO_CFG5 */
+					0x004400a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00080000 /* EMC_DLL_XFORM_DQS0 */
+					0x00080000 /* EMC_DLL_XFORM_DQS1 */
+					0x00080000 /* EMC_DLL_XFORM_DQS2 */
+					0x00080000 /* EMC_DLL_XFORM_DQS3 */
+					0x00080000 /* EMC_DLL_XFORM_DQS4 */
+					0x00080000 /* EMC_DLL_XFORM_DQS5 */
+					0x00080000 /* EMC_DLL_XFORM_DQS6 */
+					0x00080000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00080000 /* EMC_DLL_XFORM_DQ0 */
+					0x00080000 /* EMC_DLL_XFORM_DQ1 */
+					0x00080000 /* EMC_DLL_XFORM_DQ2 */
+					0x00080000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800211c /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f108 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x08000168 /* EMC_XM2QUSEPADCTRL */
+					0x08000000 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x000c000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x80000d22 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff00 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-reset = <0x80000321>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration = <
+					0x0000000f /* EMC_RC */
+					0x00000034 /* EMC_RFC */
+					0x0000000a /* EMC_RAS */
+					0x00000003 /* EMC_RP */
+					0x00000003 /* EMC_R2W */
+					0x00000008 /* EMC_W2R */
+					0x00000002 /* EMC_R2P */
+					0x00000009 /* EMC_W2P */
+					0x00000003 /* EMC_RD_RCD */
+					0x00000003 /* EMC_WR_RCD */
+					0x00000002 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000004 /* EMC_WDV */
+					0x00000006 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000c /* EMC_RDV */
+					0x000009e9 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x0000027a /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000001 /* EMC_PDEX2WR */
+					0x00000008 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000e /* EMC_RW2PDEN */
+					0x00000039 /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x0000000a /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000a2a /* EMC_TREFBW */
+					0x00000000 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00007088 /* EMC_FBIO_CFG5 */
+					0x002600a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x0003c000 /* EMC_DLL_XFORM_DQS0 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS1 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS2 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS3 */
+					0x00014000 /* EMC_DLL_XFORM_DQS4 */
+					0x00014000 /* EMC_DLL_XFORM_DQS5 */
+					0x00014000 /* EMC_DLL_XFORM_DQS6 */
+					0x00014000 /* EMC_DLL_XFORM_DQS7 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00048000 /* EMC_DLL_XFORM_DQ0 */
+					0x00048000 /* EMC_DLL_XFORM_DQ1 */
+					0x00048000 /* EMC_DLL_XFORM_DQ2 */
+					0x00048000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0600013d /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f508 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x080001e8 /* EMC_XM2QUSEPADCTRL */
+					0x08000021 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x018b000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x800014d4 /* EMC_DYN_SELF_REF_CONTROL */
+					0xf8000000 /* EMC_FBIO_SPARE */
+					0xff00ff89 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200018>;
+				nvidia,emc-mode-reset = <0x80000b71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration = <
+					0x00000020 /* EMC_RC */
+					0x0000006a /* EMC_RFC */
+					0x00000017 /* EMC_RAS */
+					0x00000007 /* EMC_RP */
+					0x00000005 /* EMC_R2W */
+					0x0000000c /* EMC_W2R */
+					0x00000003 /* EMC_R2P */
+					0x00000011 /* EMC_W2P */
+					0x00000007 /* EMC_RD_RCD */
+					0x00000007 /* EMC_WR_RCD */
+					0x00000002 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000007 /* EMC_WDV */
+					0x0000000a /* EMC_QUSE */
+					0x00000009 /* EMC_QRST */
+					0x0000000b /* EMC_QSAFE */
+					0x00000011 /* EMC_RDV */
+					0x00001412 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000504 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x0000000e /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x0000000c /* EMC_AR2PDEN */
+					0x00000016 /* EMC_RW2PDEN */
+					0x00000072 /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000005 /* EMC_TCKE */
+					0x00000015 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000006 /* EMC_TCLKSTABLE */
+					0x00000007 /* EMC_TCLKSTOP */
+					0x00001453 /* EMC_TREFBW */
+					0x0000000b /* EMC_QUSE_EXTRA */
+					0x00000006 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00005088 /* EMC_FBIO_CFG5 */
+					0xf00b0191 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x0000000a /* EMC_DLL_XFORM_DQS0 */
+					0x0000000a /* EMC_DLL_XFORM_DQS1 */
+					0x0000000a /* EMC_DLL_XFORM_DQS2 */
+					0x0000000a /* EMC_DLL_XFORM_DQS3 */
+					0x0000000a /* EMC_DLL_XFORM_DQS4 */
+					0x0000000a /* EMC_DLL_XFORM_DQS5 */
+					0x0000000a /* EMC_DLL_XFORM_DQS6 */
+					0x0000000a /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x0000000c /* EMC_DLL_XFORM_DQ0 */
+					0x0000000c /* EMC_DLL_XFORM_DQ1 */
+					0x0000000c /* EMC_DLL_XFORM_DQ2 */
+					0x0000000c /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0400013d /* EMC_XM2DQSPADCTRL2 */
+					0x22220000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f501 /* EMC_XM2COMPPADCTRL */
+					0x07077404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000000 /* EMC_XM2VTTGENPADCTRL2 */
+					0x080001e8 /* EMC_XM2QUSEPADCTRL */
+					0x0a000021 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x0155000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x800028a5 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff49 /* EMC_CFG_RSV */
+				>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-ti-pmic.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-ti-pmic.dtsi
new file mode 100644
index 000000000000..bfc06b988781
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper-ti-pmic.dtsi
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	i2c@7000d000 {
+		pmic: pmic@2d {
+			compatible = "ti,tps65911";
+			reg = <0x2d>;
+
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+
+			ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>;
+			ti,system-power-controller;
+			ti,sleep-keep-ck32k;
+			ti,sleep-enable;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			vcc1-supply = <&vdd_5v0_sys>;
+			vcc2-supply = <&vdd_5v0_sys>;
+			vcc3-supply = <&vdd_1v8>;
+			vcc4-supply = <&vdd_5v0_sys>;
+			vcc5-supply = <&vdd_5v0_sys>;
+			vcc6-supply = <&vdd2_reg>;
+			vcc7-supply = <&vdd_5v0_sys>;
+			vccio-supply = <&vdd_5v0_sys>;
+
+			regulators {
+				vdd1 {
+					regulator-name = "vddio_ddr_1v2";
+					regulator-min-microvolt = <600000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ti,regulator-ext-sleep-control = <8>;
+				};
+
+				vdd2_reg: vdd2 {
+					regulator-name = "vdd2_1v2";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_cpu: vddctrl {
+					regulator-name = "vdd_cpu,vdd_sys";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-coupled-with = <&vdd_core>;
+					regulator-coupled-max-spread = <300000>;
+					regulator-max-step-microvolt = <100000>;
+					regulator-always-on;
+					ti,regulator-ext-sleep-control = <1>;
+
+					nvidia,tegra-cpu-regulator;
+				};
+
+				vdd_1v8: vio {
+					regulator-name = "vdd_1v8_gen";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vcore_emmc: ldo1 {
+					regulator-name = "vdd_pexa,vdd_pexb";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo2 {
+					regulator-name = "vdd_sata,avdd_plle";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+				};
+
+				/* LDO3 is not connected to anything */
+
+				ldo4 {
+					regulator-name = "vdd_rtc";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+				};
+
+				ldo5 {
+					regulator-name = "vddio_sdmmc,avdd_vdac";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo6 {
+					regulator-name = "avdd_dsi_csi,pwrdet_mipi";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				ldo7 {
+					regulator-name = "vdd_pllm,x,u,a_p_c_s";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					regulator-always-on;
+					regulator-boot-on;
+					ti,regulator-ext-sleep-control = <8>;
+				};
+
+				ldo8 {
+					regulator-name = "vdd_ddr_hs";
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+					regulator-always-on;
+					ti,regulator-ext-sleep-control = <8>;
+				};
+			};
+		};
+
+		vdd_core: core-regulator@60 {
+			compatible = "ti,tps62361";
+			reg = <0x60>;
+
+			regulator-name = "tps62361-vout";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1350000>;
+			regulator-coupled-with = <&vdd_cpu>;
+			regulator-coupled-max-spread = <300000>;
+			regulator-max-step-microvolt = <100000>;
+			regulator-boot-on;
+			regulator-always-on;
+			ti,enable-vout-discharge;
+			ti,vsel0-state-high;
+			ti,vsel1-state-high;
+
+			nvidia,tegra-core-regulator;
+		};
+	};
+
+	vdd_3v3_sys: regulator@1 {
+		gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-grouper.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper.dtsi
new file mode 100644
index 000000000000..a044dbd200a9
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-asus-nexus7-grouper.dtsi
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "tegra30-asus-nexus7-grouper-common.dtsi"
+#include "tegra30-asus-nexus7-grouper-memory-timings.dtsi"
+
+/ {
+	compatible = "asus,grouper", "nvidia,tegra30";
+
+	display-panel {
+		panel-timing {
+			clock-frequency = <68000000>;
+			hactive = <800>;
+			vactive = <1280>;
+			hfront-porch = <24>;
+			hback-porch = <32>;
+			hsync-len = <24>;
+			vsync-len = <1>;
+			vfront-porch = <5>;
+			vback-porch = <32>;
+		};
+	};
+
+	pinmux@70000868 {
+		state_default: pinmux {
+			lcd_dc1_pd2 {
+				nvidia,pins = "lcd_dc1_pd2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			lcd_pwr2_pc6 {
+				nvidia,pins = "lcd_pwr2_pc6";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_cs2_n_pw3 {
+				nvidia,pins = "spi2_cs2_n_pw3";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			spi1_sck_px5 {
+				nvidia,pins = "spi1_sck_px5";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu5 {
+				nvidia,pins = "pu5";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			spi1_miso_px7 {
+				nvidia,pins = "spi1_miso_px7";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			spi2_mosi_px0 {
+				nvidia,pins = "spi2_mosi_px0";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row7_pr7 {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu3 {
+				nvidia,pins = "pu3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu4 {
+				nvidia,pins = "pu4";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row15_ps7 {
+				nvidia,pins = "kb_row15_ps7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row3_pr3 {
+				nvidia,pins = "kb_row3_pr3";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row13_ps5 {
+				nvidia,pins = "kb_row13_ps5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_wp_n_pc7 {
+				nvidia,pins = "gmi_wp_n_pc7",
+						"gmi_wait_pi7",
+						"gmi_cs4_n_pk2",
+						"gmi_cs3_n_pk4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			gmi_cs6_n_pi3 {
+				nvidia,pins = "gmi_cs6_n_pi3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+		};
+	};
+
+	i2c@7000c500 {
+		nfc@28 {
+			compatible = "nxp,pn544-i2c";
+			reg = <0x28>;
+			clock-frequency = <100000>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 0) IRQ_TYPE_EDGE_RISING>;
+
+			enable-gpios   = <&gpio TEGRA_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
+			firmware-gpios = <&gpio TEGRA_GPIO(R, 3) GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-tilapia-E1565.dts b/arch/arm/boot/dts/tegra30-asus-nexus7-tilapia-E1565.dts
new file mode 100644
index 000000000000..f1c63feb4af9
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-asus-nexus7-tilapia-E1565.dts
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-asus-nexus7-grouper-maxim-pmic.dtsi"
+#include "tegra30-asus-nexus7-tilapia.dtsi"
+
+/ {
+	model = "ASUS Google Nexus 7 (Project Bach / ME370TG) E1565";
+};
diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-tilapia-memory-timings.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-tilapia-memory-timings.dtsi
new file mode 100644
index 000000000000..9169de34fa00
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-asus-nexus7-tilapia-memory-timings.dtsi
@@ -0,0 +1,325 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "tegra30-asus-nexus7-grouper-memory-timings.dtsi"
+
+/ {
+	/*
+	 * Tilapia's memory timings are pretty much the same as the Grouper's
+	 * ones. There are few minor tunings made for a higher clock rates,
+	 * these differentiating timings are overridden here for Tilapia.
+	 */
+
+	memory-controller@7000f400 {
+		emc-timings-0 {
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200018>;
+				nvidia,emc-mode-reset = <0x80000b71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration = <
+					0x0000001f /* EMC_RC */
+					0x00000069 /* EMC_RFC */
+					0x00000017 /* EMC_RAS */
+					0x00000007 /* EMC_RP */
+					0x00000005 /* EMC_R2W */
+					0x0000000c /* EMC_W2R */
+					0x00000003 /* EMC_R2P */
+					0x00000011 /* EMC_W2P */
+					0x00000007 /* EMC_RD_RCD */
+					0x00000007 /* EMC_WR_RCD */
+					0x00000002 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000007 /* EMC_WDV */
+					0x0000000b /* EMC_QUSE */
+					0x00000009 /* EMC_QRST */
+					0x0000000b /* EMC_QSAFE */
+					0x00000011 /* EMC_RDV */
+					0x00001412 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000504 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x0000000e /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x0000000c /* EMC_AR2PDEN */
+					0x00000016 /* EMC_RW2PDEN */
+					0x00000072 /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000005 /* EMC_TCKE */
+					0x00000015 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000006 /* EMC_TCLKSTABLE */
+					0x00000007 /* EMC_TCLKSTOP */
+					0x00001453 /* EMC_TREFBW */
+					0x0000000c /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00005088 /* EMC_FBIO_CFG5 */
+					0xf00b0191 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00000008 /* EMC_DLL_XFORM_DQS0 */
+					0x00000008 /* EMC_DLL_XFORM_DQS1 */
+					0x00000008 /* EMC_DLL_XFORM_DQS2 */
+					0x00000008 /* EMC_DLL_XFORM_DQS3 */
+					0x0000000a /* EMC_DLL_XFORM_DQS4 */
+					0x0000000a /* EMC_DLL_XFORM_DQS5 */
+					0x0000000a /* EMC_DLL_XFORM_DQS6 */
+					0x0000000a /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x0000000c /* EMC_DLL_XFORM_DQ0 */
+					0x0000000c /* EMC_DLL_XFORM_DQ1 */
+					0x0000000c /* EMC_DLL_XFORM_DQ2 */
+					0x0000000c /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800013d /* EMC_XM2DQSPADCTRL2 */
+					0x22220000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f501 /* EMC_XM2COMPPADCTRL */
+					0x07077404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000000 /* EMC_XM2VTTGENPADCTRL2 */
+					0x080001e8 /* EMC_XM2QUSEPADCTRL */
+					0x08000021 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x0156000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x800028a5 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff49 /* EMC_CFG_RSV */
+				>;
+			};
+		};
+
+		emc-timings-1 {
+			timing-333500000 {
+				clock-frequency = <333500000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200000>;
+				nvidia,emc-mode-reset = <0x80000321>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+
+				nvidia,emc-configuration = <
+					0x0000000f /* EMC_RC */
+					0x00000034 /* EMC_RFC */
+					0x0000000a /* EMC_RAS */
+					0x00000003 /* EMC_RP */
+					0x00000003 /* EMC_R2W */
+					0x00000008 /* EMC_W2R */
+					0x00000002 /* EMC_R2P */
+					0x00000009 /* EMC_W2P */
+					0x00000003 /* EMC_RD_RCD */
+					0x00000003 /* EMC_WR_RCD */
+					0x00000002 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000004 /* EMC_WDV */
+					0x00000006 /* EMC_QUSE */
+					0x00000004 /* EMC_QRST */
+					0x0000000a /* EMC_QSAFE */
+					0x0000000c /* EMC_RDV */
+					0x000009e9 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x0000027a /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000001 /* EMC_PDEX2WR */
+					0x00000008 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000e /* EMC_RW2PDEN */
+					0x00000039 /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x0000000a /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000004 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000a2a /* EMC_TREFBW */
+					0x00000000 /* EMC_QUSE_EXTRA */
+					0x00000004 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00007088 /* EMC_FBIO_CFG5 */
+					0x002600a4 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x0003c000 /* EMC_DLL_XFORM_DQS0 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS1 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS2 */
+					0x0003c000 /* EMC_DLL_XFORM_DQS3 */
+					0x00014000 /* EMC_DLL_XFORM_DQS4 */
+					0x00014000 /* EMC_DLL_XFORM_DQS5 */
+					0x00014000 /* EMC_DLL_XFORM_DQS6 */
+					0x00014000 /* EMC_DLL_XFORM_DQS7 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00048000 /* EMC_DLL_XFORM_DQ0 */
+					0x00048000 /* EMC_DLL_XFORM_DQ1 */
+					0x00048000 /* EMC_DLL_XFORM_DQ2 */
+					0x00048000 /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800013d /* EMC_XM2DQSPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f508 /* EMC_XM2COMPPADCTRL */
+					0x05057404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000007 /* EMC_XM2VTTGENPADCTRL2 */
+					0x080001e8 /* EMC_XM2QUSEPADCTRL */
+					0x08000021 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x018b000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x800014d4 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff89 /* EMC_CFG_RSV */
+				>;
+			};
+
+			timing-667000000 {
+				clock-frequency = <667000000>;
+
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-mode-1 = <0x80100002>;
+				nvidia,emc-mode-2 = <0x80200018>;
+				nvidia,emc-mode-reset = <0x80000b71>;
+				nvidia,emc-zcal-cnt-long = <0x00000040>;
+				nvidia,emc-cfg-periodic-qrst;
+
+				nvidia,emc-configuration = <
+					0x00000020 /* EMC_RC */
+					0x0000006a /* EMC_RFC */
+					0x00000017 /* EMC_RAS */
+					0x00000007 /* EMC_RP */
+					0x00000005 /* EMC_R2W */
+					0x0000000c /* EMC_W2R */
+					0x00000003 /* EMC_R2P */
+					0x00000011 /* EMC_W2P */
+					0x00000007 /* EMC_RD_RCD */
+					0x00000007 /* EMC_WR_RCD */
+					0x00000002 /* EMC_RRD */
+					0x00000001 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000007 /* EMC_WDV */
+					0x0000000a /* EMC_QUSE */
+					0x00000009 /* EMC_QRST */
+					0x0000000b /* EMC_QSAFE */
+					0x00000011 /* EMC_RDV */
+					0x00001412 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000504 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x0000000e /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x0000000c /* EMC_AR2PDEN */
+					0x00000016 /* EMC_RW2PDEN */
+					0x00000072 /* EMC_TXSR */
+					0x00000200 /* EMC_TXSRDLL */
+					0x00000005 /* EMC_TCKE */
+					0x00000015 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000006 /* EMC_TCLKSTABLE */
+					0x00000007 /* EMC_TCLKSTOP */
+					0x00001453 /* EMC_TREFBW */
+					0x0000000b /* EMC_QUSE_EXTRA */
+					0x00000006 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x00005088 /* EMC_FBIO_CFG5 */
+					0xf00b0191 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00000008 /* EMC_DLL_XFORM_DQS0 */
+					0x00000008 /* EMC_DLL_XFORM_DQS1 */
+					0x00000008 /* EMC_DLL_XFORM_DQS2 */
+					0x00000008 /* EMC_DLL_XFORM_DQS3 */
+					0x0000000a /* EMC_DLL_XFORM_DQS4 */
+					0x0000000a /* EMC_DLL_XFORM_DQS5 */
+					0x0000000a /* EMC_DLL_XFORM_DQS6 */
+					0x0000000a /* EMC_DLL_XFORM_DQS7 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00018000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x0000000a /* EMC_DLL_XFORM_DQ0 */
+					0x0000000a /* EMC_DLL_XFORM_DQ1 */
+					0x0000000a /* EMC_DLL_XFORM_DQ2 */
+					0x0000000a /* EMC_DLL_XFORM_DQ3 */
+					0x000002a0 /* EMC_XM2CMDPADCTRL */
+					0x0800013d /* EMC_XM2DQSPADCTRL2 */
+					0x22220000 /* EMC_XM2DQPADCTRL2 */
+					0x77fff884 /* EMC_XM2CLKPADCTRL */
+					0x01f1f501 /* EMC_XM2COMPPADCTRL */
+					0x07077404 /* EMC_XM2VTTGENPADCTRL */
+					0x54000000 /* EMC_XM2VTTGENPADCTRL2 */
+					0x080001e8 /* EMC_XM2QUSEPADCTRL */
+					0x0c000021 /* EMC_XM2DQSPADCTRL3 */
+					0x00000802 /* EMC_CTT_TERM_CTRL */
+					0x00020000 /* EMC_ZCAL_INTERVAL */
+					0x00000100 /* EMC_ZCAL_WAIT_CNT */
+					0x0155000c /* EMC_MRS_WAIT_CNT */
+					0xa0f10000 /* EMC_AUTO_CAL_CONFIG */
+					0x00000000 /* EMC_CTT */
+					0x00000000 /* EMC_CTT_DURATION */
+					0x800028a5 /* EMC_DYN_SELF_REF_CONTROL */
+					0xe8000000 /* EMC_FBIO_SPARE */
+					0xff00ff49 /* EMC_CFG_RSV */
+				>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tegra30-asus-nexus7-tilapia.dtsi b/arch/arm/boot/dts/tegra30-asus-nexus7-tilapia.dtsi
new file mode 100644
index 000000000000..e3da89f1941a
--- /dev/null
+++ b/arch/arm/boot/dts/tegra30-asus-nexus7-tilapia.dtsi
@@ -0,0 +1,235 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "tegra30-asus-nexus7-grouper-common.dtsi"
+#include "tegra30-asus-nexus7-tilapia-memory-timings.dtsi"
+
+/ {
+	compatible = "asus,tilapia", "asus,grouper", "nvidia,tegra30";
+
+	display-panel {
+		enable-gpios = <&gpio TEGRA_GPIO(V, 6) GPIO_ACTIVE_HIGH>;
+
+		panel-timing {
+			clock-frequency = <81750000>;
+			hactive = <800>;
+			vactive = <1280>;
+			hfront-porch = <64>;
+			hback-porch = <128>;
+			hsync-len = <64>;
+			vsync-len = <1>;
+			vfront-porch = <5>;
+			vback-porch = <2>;
+		};
+	};
+
+	gpio@6000d000 {
+		init-mode-3g {
+			gpio-hog;
+			gpios =	<TEGRA_GPIO(D, 2) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(P, 1) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(X, 5) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(U, 5) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(X, 7) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(X, 0) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(EE, 1) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(Y, 2) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(Y, 3) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(U, 3) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(N, 1) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(N, 2) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(N, 0) GPIO_ACTIVE_HIGH>,
+				<TEGRA_GPIO(N, 3) GPIO_ACTIVE_HIGH>;
+			output-low;
+		};
+	};
+
+	pinmux@70000868 {
+		state_default: pinmux {
+			lcd_dc1_pd2 {
+				nvidia,pins = "lcd_dc1_pd2";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			lcd_pwr2_pc6 {
+				nvidia,pins = "lcd_pwr2_pc6";
+				nvidia,function = "displaya";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_cs2_n_pw3 {
+				nvidia,pins = "spi2_cs2_n_pw3";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap3_din_pp1 {
+				nvidia,pins = "dap3_din_pp1";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spi1_sck_px5 {
+				nvidia,pins = "spi1_sck_px5";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			pu5 {
+				nvidia,pins = "pu5";
+				nvidia,function = "pwm2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			spi1_miso_px7 {
+				nvidia,pins = "spi1_miso_px7";
+				nvidia,function = "spi1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			spi2_mosi_px0 {
+				nvidia,pins = "spi2_mosi_px0";
+				nvidia,function = "spi2";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			clk3_req_pee1 {
+				nvidia,pins = "clk3_req_pee1";
+				nvidia,function = "dev3";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			ulpi_nxt_py2 {
+				nvidia,pins = "ulpi_nxt_py2";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			ulpi_stp_py3 {
+				nvidia,pins = "ulpi_stp_py3";
+				nvidia,function = "uartd";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row7_pr7 {
+				nvidia,pins = "kb_row7_pr7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu4 {
+				nvidia,pins = "pu4";
+				nvidia,function = "pwm1";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			pu3 {
+				nvidia,pins = "pu3";
+				nvidia,function = "rsvd4";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row15_ps7 {
+				nvidia,pins = "kb_row15_ps7";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			dap3_sclk_pp3 {
+				nvidia,pins = "dap3_sclk_pp3";
+				nvidia,function = "i2s2";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_DISABLE>;
+			};
+			kb_row3_pr3 {
+				nvidia,pins = "kb_row3_pr3",
+						"kb_row13_ps5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			kb_row13_ps5 {
+				nvidia,pins = "kb_row13_ps5";
+				nvidia,function = "kbc";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_wp_n_pc7 {
+				nvidia,pins = "gmi_wp_n_pc7",
+						"gmi_wait_pi7",
+						"gmi_cs4_n_pk2",
+						"gmi_cs3_n_pk4";
+				nvidia,function = "rsvd1";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+			gmi_cs6_n_pi3 {
+				nvidia,pins = "gmi_cs6_n_pi3";
+				nvidia,function = "gmi";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+				nvidia,enable-input = <TEGRA_PIN_ENABLE>;
+			};
+		};
+	};
+
+	i2c@7000c500 {
+		proximity-sensor@28 {
+			compatible = "microchip,cap1106";
+			reg = <0x28>;
+
+			/*
+			 * Binding doesn't support specifying linux,input-type
+			 * and this results in unwanted key-presses handled by
+			 * applications, hence keep it disabled for now.
+			 */
+			status = "disabled";
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(R, 3) IRQ_TYPE_LEVEL_HIGH>;
+
+			linux,keycodes = <KEY_RESERVED>,
+					 <KEY_RESERVED>,
+					 <KEY_RESERVED>,
+					 <KEY_RESERVED>,
+					 <KEY_RESERVED>,
+					 <SW_FRONT_PROXIMITY>;
+		};
+
+		nfc@2a {
+			compatible = "nxp,pn544-i2c";
+			reg = <0x2a>;
+
+			clock-frequency = <100000>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(S, 7) IRQ_TYPE_EDGE_RISING>;
+
+			enable-gpios   = <&gpio TEGRA_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
+			firmware-gpios = <&gpio TEGRA_GPIO(P, 3) GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts
index 6b6fd8a8058f..e0624b74fb50 100644
--- a/arch/arm/boot/dts/tegra30-beaver.dts
+++ b/arch/arm/boot/dts/tegra30-beaver.dts
@@ -1922,7 +1922,7 @@
 		};
 	};
 
-	sdhci@78000000 {
+	mmc@78000000 {
 		status = "okay";
 		vqmmc-supply = <&ldo5_reg>;
 		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
@@ -1931,7 +1931,7 @@
 		bus-width = <4>;
 	};
 
-	sdhci@78000600 {
+	mmc@78000600 {
 		status = "okay";
 		bus-width = <8>;
 		non-removable;
@@ -1965,17 +1965,10 @@
 		status = "okay";
 	};
 
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
+	clk32k_in: clock@0 {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
 	};
 
 	gpio-leds {
@@ -1991,118 +1984,103 @@
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vdd_5v_in_reg: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "vdd_5v_in";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
+	vdd_5v_in_reg: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v_in";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
 
-		chargepump_5v_reg: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "chargepump_5v";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-boot-on;
-			regulator-always-on;
-			enable-active-high;
-			gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
-		};
+	chargepump_5v_reg: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "chargepump_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+		enable-active-high;
+		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+	};
 
-		ddr_reg: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "vdd_ddr";
-			regulator-min-microvolt = <1500000>;
-			regulator-max-microvolt = <1500000>;
-			regulator-always-on;
-			regulator-boot-on;
-			enable-active-high;
-			gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
-			vin-supply = <&vdd_5v_in_reg>;
-		};
+	ddr_reg: regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_ddr";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&vdd_5v_in_reg>;
+	};
 
-		vdd_5v_sata_reg: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "vdd_5v_sata";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-			regulator-boot-on;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(D, 6) GPIO_ACTIVE_HIGH>;
-			vin-supply = <&vdd_5v_in_reg>;
-		};
+	vdd_5v_sata_reg: regulator@3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v_sata";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(D, 6) GPIO_ACTIVE_HIGH>;
+		vin-supply = <&vdd_5v_in_reg>;
+	};
 
-		usb1_vbus_reg: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(DD, 6) GPIO_ACTIVE_HIGH>;
-			gpio-open-drain;
-			vin-supply = <&vdd_5v_in_reg>;
-		};
+	usb1_vbus_reg: regulator@4 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(DD, 6) GPIO_ACTIVE_HIGH>;
+		gpio-open-drain;
+		vin-supply = <&vdd_5v_in_reg>;
+	};
 
-		usb3_vbus_reg: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			regulator-name = "usb3_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>;
-			gpio-open-drain;
-			vin-supply = <&vdd_5v_in_reg>;
-		};
+	usb3_vbus_reg: regulator@5 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>;
+		gpio-open-drain;
+		vin-supply = <&vdd_5v_in_reg>;
+	};
 
-		sys_3v3_reg: regulator@6 {
-			compatible = "regulator-fixed";
-			reg = <6>;
-			regulator-name = "sys_3v3,vdd_3v3_alw";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-			regulator-boot-on;
-			enable-active-high;
-			gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
-			vin-supply = <&vdd_5v_in_reg>;
-		};
+	sys_3v3_reg: regulator@6 {
+		compatible = "regulator-fixed";
+		regulator-name = "sys_3v3,vdd_3v3_alw";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&vdd_5v_in_reg>;
+	};
 
-		sys_3v3_pexs_reg: regulator@7 {
-			compatible = "regulator-fixed";
-			reg = <7>;
-			regulator-name = "sys_3v3_pexs";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-			regulator-boot-on;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(L, 7) GPIO_ACTIVE_HIGH>;
-			vin-supply = <&sys_3v3_reg>;
-		};
+	sys_3v3_pexs_reg: regulator@7 {
+		compatible = "regulator-fixed";
+		regulator-name = "sys_3v3_pexs";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(L, 7) GPIO_ACTIVE_HIGH>;
+		vin-supply = <&sys_3v3_reg>;
+	};
 
-		vdd_5v0_hdmi: regulator@8 {
-			compatible = "regulator-fixed";
-			reg = <8>;
-			regulator-name = "+VDD_5V_HDMI";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-			regulator-boot-on;
-			vin-supply = <&sys_3v3_reg>;
-		};
+	vdd_5v0_hdmi: regulator@8 {
+		compatible = "regulator-fixed";
+		regulator-name = "+VDD_5V_HDMI";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&sys_3v3_reg>;
 	};
 
 	sound {
diff --git a/arch/arm/boot/dts/tegra30-cardhu-a02.dts b/arch/arm/boot/dts/tegra30-cardhu-a02.dts
index a02ec5082287..4899e05a0d9c 100644
--- a/arch/arm/boot/dts/tegra30-cardhu-a02.dts
+++ b/arch/arm/boot/dts/tegra30-cardhu-a02.dts
@@ -9,87 +9,75 @@
 	model = "NVIDIA Tegra30 Cardhu A02 evaluation board";
 	compatible = "nvidia,cardhu-a02", "nvidia,cardhu", "nvidia,tegra30";
 
-	sdhci@78000400 {
+	mmc@78000400 {
 		status = "okay";
 		power-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
 		bus-width = <4>;
 		keep-power-in-suspend;
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ddr_reg: regulator@100 {
-			compatible = "regulator-fixed";
-			reg = <100>;
-			regulator-name = "vdd_ddr";
-			regulator-min-microvolt = <1500000>;
-			regulator-max-microvolt = <1500000>;
-			regulator-always-on;
-			regulator-boot-on;
-			enable-active-high;
-			gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
-		};
+	ddr_reg: regulator@100 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_ddr";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+	};
 
-		sys_3v3_reg: regulator@101 {
-			compatible = "regulator-fixed";
-			reg = <101>;
-			regulator-name = "sys_3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-			regulator-boot-on;
-			enable-active-high;
-			gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
-		};
+	sys_3v3_reg: regulator@101 {
+		compatible = "regulator-fixed";
+		regulator-name = "sys_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
+	};
 
-		usb1_vbus_reg: regulator@102 {
-			compatible = "regulator-fixed";
-			reg = <102>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(I, 4) GPIO_ACTIVE_HIGH>;
-			gpio-open-drain;
-			vin-supply = <&vdd_5v0_reg>;
-		};
+	usb1_vbus_reg: regulator@102 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(I, 4) GPIO_ACTIVE_HIGH>;
+		gpio-open-drain;
+		vin-supply = <&vdd_5v0_reg>;
+	};
 
-		usb3_vbus_reg: regulator@103 {
-			compatible = "regulator-fixed";
-			reg = <103>;
-			regulator-name = "usb3_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
-			gpio-open-drain;
-			vin-supply = <&vdd_5v0_reg>;
-		};
+	usb3_vbus_reg: regulator@103 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
+		gpio-open-drain;
+		vin-supply = <&vdd_5v0_reg>;
+	};
 
-		vdd_5v0_reg: regulator@104 {
-			compatible = "regulator-fixed";
-			reg = <104>;
-			regulator-name = "5v0";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
-		};
+	vdd_5v0_reg: regulator@104 {
+		compatible = "regulator-fixed";
+		regulator-name = "5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
+	};
 
-		vdd_bl_reg: regulator@105 {
-			compatible = "regulator-fixed";
-			reg = <105>;
-			regulator-name = "vdd_bl";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-			regulator-boot-on;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(K, 3) GPIO_ACTIVE_HIGH>;
-		};
+	vdd_bl_reg: regulator@105 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_bl";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(K, 3) GPIO_ACTIVE_HIGH>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/tegra30-cardhu-a04.dts b/arch/arm/boot/dts/tegra30-cardhu-a04.dts
index 9234988624ec..c1c0ca628af1 100644
--- a/arch/arm/boot/dts/tegra30-cardhu-a04.dts
+++ b/arch/arm/boot/dts/tegra30-cardhu-a04.dts
@@ -11,99 +11,86 @@
 	model = "NVIDIA Tegra30 Cardhu A04 (A05, A06, A07) evaluation board";
 	compatible = "nvidia,cardhu-a04", "nvidia,cardhu", "nvidia,tegra30";
 
-	sdhci@78000400 {
+	mmc@78000400 {
 		status = "okay";
 		power-gpios = <&gpio TEGRA_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
 		bus-width = <4>;
 		keep-power-in-suspend;
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ddr_reg: regulator@100 {
-			compatible = "regulator-fixed";
-			regulator-name = "ddr";
-			reg = <100>;
-			regulator-min-microvolt = <1500000>;
-			regulator-max-microvolt = <1500000>;
-			regulator-always-on;
-			regulator-boot-on;
-			enable-active-high;
-			gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
-		};
+	ddr_reg: regulator@100 {
+		compatible = "regulator-fixed";
+		regulator-name = "ddr";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
+	};
 
-		sys_3v3_reg: regulator@101 {
-			compatible = "regulator-fixed";
-			reg = <101>;
-			regulator-name = "sys_3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-			regulator-boot-on;
-			enable-active-high;
-			gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
-		};
+	sys_3v3_reg: regulator@101 {
+		compatible = "regulator-fixed";
+		regulator-name = "sys_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&pmic 6 GPIO_ACTIVE_HIGH>;
+	};
 
-		usb1_vbus_reg: regulator@102 {
-			compatible = "regulator-fixed";
-			reg = <102>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(DD, 6) GPIO_ACTIVE_HIGH>;
-			gpio-open-drain;
-			vin-supply = <&vdd_5v0_reg>;
-		};
+	usb1_vbus_reg: regulator@102 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(DD, 6) GPIO_ACTIVE_HIGH>;
+		gpio-open-drain;
+		vin-supply = <&vdd_5v0_reg>;
+	};
 
-		usb3_vbus_reg: regulator@103 {
-			compatible = "regulator-fixed";
-			reg = <103>;
-			regulator-name = "usb3_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>;
-			gpio-open-drain;
-			vin-supply = <&vdd_5v0_reg>;
-		};
+	usb3_vbus_reg: regulator@103 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>;
+		gpio-open-drain;
+		vin-supply = <&vdd_5v0_reg>;
+	};
 
-		vdd_5v0_reg: regulator@104 {
-			compatible = "regulator-fixed";
-			reg = <104>;
-			regulator-name = "5v0";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			gpio = <&pmic 8 GPIO_ACTIVE_HIGH>;
-		};
+	vdd_5v0_reg: regulator@104 {
+		compatible = "regulator-fixed";
+		regulator-name = "5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&pmic 8 GPIO_ACTIVE_HIGH>;
+	};
 
-		vdd_bl_reg: regulator@105 {
-			compatible = "regulator-fixed";
-			reg = <105>;
-			regulator-name = "vdd_bl";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-			regulator-boot-on;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(DD, 2) GPIO_ACTIVE_HIGH>;
-		};
+	vdd_bl_reg: regulator@105 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_bl";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(DD, 2) GPIO_ACTIVE_HIGH>;
+	};
 
-		vdd_bl2_reg: regulator@106 {
-			compatible = "regulator-fixed";
-			reg = <106>;
-			regulator-name = "vdd_bl2";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-			regulator-boot-on;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(DD, 0) GPIO_ACTIVE_HIGH>;
-		};
+	vdd_bl2_reg: regulator@106 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_bl2";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(DD, 0) GPIO_ACTIVE_HIGH>;
 	};
 
 	i2c@7000d000 {
diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi
index 5ee5d141bd81..dab9989fa760 100644
--- a/arch/arm/boot/dts/tegra30-cardhu.dtsi
+++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi
@@ -384,7 +384,7 @@
 		};
 	};
 
-	sdhci@78000000 {
+	mmc@78000000 {
 		status = "okay";
 		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
 		wp-gpios = <&gpio TEGRA_GPIO(T, 3) GPIO_ACTIVE_HIGH>;
@@ -392,7 +392,7 @@
 		bus-width = <4>;
 	};
 
-	sdhci@78000600 {
+	mmc@78000600 {
 		status = "okay";
 		bus-width = <8>;
 		non-removable;
@@ -418,17 +418,10 @@
 		default-brightness-level = <6>;
 	};
 
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
+	clk32k_in: clock@0 {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
 	};
 
 	panel: panel {
@@ -441,158 +434,139 @@
 		backlight = <&backlight>;
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vdd_ac_bat_reg: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "vdd_ac_bat";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
+	vdd_ac_bat_reg: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_ac_bat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
 
-		cam_1v8_reg: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "cam_1v8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(BB, 4) GPIO_ACTIVE_HIGH>;
-			vin-supply = <&vio_reg>;
-		};
+	cam_1v8_reg: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "cam_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(BB, 4) GPIO_ACTIVE_HIGH>;
+		vin-supply = <&vio_reg>;
+	};
 
-		cp_5v_reg: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "cp_5v";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-boot-on;
-			regulator-always-on;
-			enable-active-high;
-			gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
-		};
+	cp_5v_reg: regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "cp_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+		enable-active-high;
+		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+	};
 
-		emmc_3v3_reg: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "emmc_3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-			regulator-boot-on;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(D, 1) GPIO_ACTIVE_HIGH>;
-			vin-supply = <&sys_3v3_reg>;
-		};
+	emmc_3v3_reg: regulator@3 {
+		compatible = "regulator-fixed";
+		regulator-name = "emmc_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(D, 1) GPIO_ACTIVE_HIGH>;
+		vin-supply = <&sys_3v3_reg>;
+	};
 
-		modem_3v3_reg: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "modem_3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(D, 6) GPIO_ACTIVE_HIGH>;
-		};
+	modem_3v3_reg: regulator@4 {
+		compatible = "regulator-fixed";
+		regulator-name = "modem_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(D, 6) GPIO_ACTIVE_HIGH>;
+	};
 
-		pex_hvdd_3v3_reg: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			regulator-name = "pex_hvdd_3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(L, 7) GPIO_ACTIVE_HIGH>;
-			vin-supply = <&sys_3v3_reg>;
-		};
+	pex_hvdd_3v3_reg: regulator@5 {
+		compatible = "regulator-fixed";
+		regulator-name = "pex_hvdd_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(L, 7) GPIO_ACTIVE_HIGH>;
+		vin-supply = <&sys_3v3_reg>;
+	};
 
-		vdd_cam1_ldo_reg: regulator@6 {
-			compatible = "regulator-fixed";
-			reg = <6>;
-			regulator-name = "vdd_cam1_ldo";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(R, 6) GPIO_ACTIVE_HIGH>;
-			vin-supply = <&sys_3v3_reg>;
-		};
+	vdd_cam1_ldo_reg: regulator@6 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_cam1_ldo";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(R, 6) GPIO_ACTIVE_HIGH>;
+		vin-supply = <&sys_3v3_reg>;
+	};
 
-		vdd_cam2_ldo_reg: regulator@7 {
-			compatible = "regulator-fixed";
-			reg = <7>;
-			regulator-name = "vdd_cam2_ldo";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
-			vin-supply = <&sys_3v3_reg>;
-		};
+	vdd_cam2_ldo_reg: regulator@7 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_cam2_ldo";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
+		vin-supply = <&sys_3v3_reg>;
+	};
 
-		vdd_cam3_ldo_reg: regulator@8 {
-			compatible = "regulator-fixed";
-			reg = <8>;
-			regulator-name = "vdd_cam3_ldo";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(S, 0) GPIO_ACTIVE_HIGH>;
-			vin-supply = <&sys_3v3_reg>;
-		};
+	vdd_cam3_ldo_reg: regulator@8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_cam3_ldo";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(S, 0) GPIO_ACTIVE_HIGH>;
+		vin-supply = <&sys_3v3_reg>;
+	};
 
-		vdd_com_reg: regulator@9 {
-			compatible = "regulator-fixed";
-			reg = <9>;
-			regulator-name = "vdd_com";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-			regulator-boot-on;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
-			vin-supply = <&sys_3v3_reg>;
-		};
+	vdd_com_reg: regulator@9 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_com";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		vin-supply = <&sys_3v3_reg>;
+	};
 
-		vdd_fuse_3v3_reg: regulator@10 {
-			compatible = "regulator-fixed";
-			reg = <10>;
-			regulator-name = "vdd_fuse_3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(L, 6) GPIO_ACTIVE_HIGH>;
-			vin-supply = <&sys_3v3_reg>;
-		};
+	vdd_fuse_3v3_reg: regulator@10 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_fuse_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(L, 6) GPIO_ACTIVE_HIGH>;
+		vin-supply = <&sys_3v3_reg>;
+	};
 
-		vdd_pnl1_reg: regulator@11 {
-			compatible = "regulator-fixed";
-			reg = <11>;
-			regulator-name = "vdd_pnl1";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-			regulator-boot-on;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(L, 4) GPIO_ACTIVE_HIGH>;
-			vin-supply = <&sys_3v3_reg>;
-		};
+	vdd_pnl1_reg: regulator@11 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_pnl1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(L, 4) GPIO_ACTIVE_HIGH>;
+		vin-supply = <&sys_3v3_reg>;
+	};
 
-		vdd_vid_reg: regulator@12 {
-			compatible = "regulator-fixed";
-			reg = <12>;
-			regulator-name = "vddio_vid";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			gpio = <&gpio TEGRA_GPIO(T, 0) GPIO_ACTIVE_HIGH>;
-			gpio-open-drain;
-			vin-supply = <&vdd_5v0_reg>;
-		};
+	vdd_vid_reg: regulator@12 {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio_vid";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio TEGRA_GPIO(T, 0) GPIO_ACTIVE_HIGH>;
+		gpio-open-drain;
+		vin-supply = <&vdd_5v0_reg>;
 	};
 
 	sound {
diff --git a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
index 8e106e784dce..7d4a6ca4936a 100644
--- a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
@@ -98,7 +98,7 @@
 	};
 
 	/* SD/MMC */
-	sdhci@78000200 {
+	mmc@78000200 {
 		status = "okay";
 		bus-width = <4>;
 		cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>; /* MMCD */
diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
index adba554381c7..e36aa3ce6c3d 100644
--- a/arch/arm/boot/dts/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
@@ -527,7 +527,7 @@
 			};
 
 			/* Colibri USBH_OC */
-			spi2-cs2-n-pw3, {
+			spi2-cs2-n-pw3 {
 				nvidia,pins = "spi2_cs2_n_pw3";
 				nvidia,function = "spi2_alt";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
@@ -723,6 +723,7 @@
 		sgtl5000: codec@a {
 			compatible = "fsl,sgtl5000";
 			reg = <0x0a>;
+			#sound-dai-cells = <0>;
 			VDDA-supply = <&reg_module_3v3_audio>;
 			VDDD-supply = <&reg_1v8_vio>;
 			VDDIO-supply = <&reg_module_3v3>;
@@ -933,7 +934,7 @@
 	};
 
 	/* eMMC */
-	sdhci@78000600 {
+	mmc@78000600 {
 		status = "okay";
 		bus-width = <8>;
 		non-removable;
diff --git a/arch/arm/boot/dts/tegra30-cpu-opp-microvolt.dtsi b/arch/arm/boot/dts/tegra30-cpu-opp-microvolt.dtsi
index 5c40ef49894f..d682f7437146 100644
--- a/arch/arm/boot/dts/tegra30-cpu-opp-microvolt.dtsi
+++ b/arch/arm/boot/dts/tegra30-cpu-opp-microvolt.dtsi
@@ -2,799 +2,799 @@
 
 / {
 	cpu0_opp_table: cpu_opp_table0 {
-		opp@51000000_800 {
+		opp@51000000,800 {
 			opp-microvolt = <800000 800000 1250000>;
 		};
 
-		opp@51000000_850 {
+		opp@51000000,850 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@51000000_912 {
+		opp@51000000,912 {
 			opp-microvolt = <912000 912000 1250000>;
 		};
 
-		opp@102000000_800 {
+		opp@102000000,800 {
 			opp-microvolt = <800000 800000 1250000>;
 		};
 
-		opp@102000000_850 {
+		opp@102000000,850 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@102000000_912 {
+		opp@102000000,912 {
 			opp-microvolt = <912000 912000 1250000>;
 		};
 
-		opp@204000000_800 {
+		opp@204000000,800 {
 			opp-microvolt = <800000 800000 1250000>;
 		};
 
-		opp@204000000_850 {
+		opp@204000000,850 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@204000000_912 {
+		opp@204000000,912 {
 			opp-microvolt = <912000 912000 1250000>;
 		};
 
-		opp@312000000_850 {
+		opp@312000000,850 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@312000000_912 {
+		opp@312000000,912 {
 			opp-microvolt = <912000 912000 1250000>;
 		};
 
-		opp@340000000_800 {
+		opp@340000000,800 {
 			opp-microvolt = <800000 800000 1250000>;
 		};
 
-		opp@340000000_850 {
+		opp@340000000,850 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@370000000_800 {
+		opp@370000000,800 {
 			opp-microvolt = <800000 800000 1250000>;
 		};
 
-		opp@456000000_850 {
+		opp@456000000,850 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@456000000_912 {
+		opp@456000000,912 {
 			opp-microvolt = <912000 912000 1250000>;
 		};
 
-		opp@475000000_800 {
+		opp@475000000,800 {
 			opp-microvolt = <800000 800000 1250000>;
 		};
 
-		opp@475000000_850 {
+		opp@475000000,850 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@475000000_850_0_1 {
+		opp@475000000,850,0,1 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@475000000_850_0_4 {
+		opp@475000000,850,0,4 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@475000000_850_0_7 {
+		opp@475000000,850,0,7 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@475000000_850_0_8 {
+		opp@475000000,850,0,8 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@608000000_850 {
+		opp@608000000,850 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@608000000_912 {
+		opp@608000000,912 {
 			opp-microvolt = <912000 912000 1250000>;
 		};
 
-		opp@620000000_850 {
+		opp@620000000,850 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@640000000_850 {
+		opp@640000000,850 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@640000000_850_1_1 {
+		opp@640000000,850,1,1 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@640000000_850_2_1 {
+		opp@640000000,850,2,1 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@640000000_850_3_1 {
+		opp@640000000,850,3,1 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@640000000_850_1_4 {
+		opp@640000000,850,1,4 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@640000000_850_2_4 {
+		opp@640000000,850,2,4 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@640000000_850_3_4 {
+		opp@640000000,850,3,4 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@640000000_850_1_7 {
+		opp@640000000,850,1,7 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@640000000_850_2_7 {
+		opp@640000000,850,2,7 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@640000000_850_3_7 {
+		opp@640000000,850,3,7 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@640000000_850_4_7 {
+		opp@640000000,850,4,7 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@640000000_850_1_8 {
+		opp@640000000,850,1,8 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@640000000_850_2_8 {
+		opp@640000000,850,2,8 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@640000000_850_3_8 {
+		opp@640000000,850,3,8 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@640000000_850_4_8 {
+		opp@640000000,850,4,8 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@640000000_900 {
+		opp@640000000,900 {
 			opp-microvolt = <900000 900000 1250000>;
 		};
 
-		opp@760000000_850 {
+		opp@760000000,850 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@760000000_850_3_1 {
+		opp@760000000,850,3,1 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@760000000_850_3_2 {
+		opp@760000000,850,3,2 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@760000000_850_3_3 {
+		opp@760000000,850,3,3 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@760000000_850_3_4 {
+		opp@760000000,850,3,4 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@760000000_850_3_7 {
+		opp@760000000,850,3,7 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@760000000_850_4_7 {
+		opp@760000000,850,4,7 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@760000000_850_3_8 {
+		opp@760000000,850,3,8 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@760000000_850_4_8 {
+		opp@760000000,850,4,8 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@760000000_850_0_10 {
+		opp@760000000,850,0,10 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@760000000_900 {
+		opp@760000000,900 {
 			opp-microvolt = <900000 900000 1250000>;
 		};
 
-		opp@760000000_900_1_1 {
+		opp@760000000,900,1,1 {
 			opp-microvolt = <900000 900000 1250000>;
 		};
 
-		opp@760000000_900_2_1 {
+		opp@760000000,900,2,1 {
 			opp-microvolt = <900000 900000 1250000>;
 		};
 
-		opp@760000000_900_1_2 {
+		opp@760000000,900,1,2 {
 			opp-microvolt = <900000 900000 1250000>;
 		};
 
-		opp@760000000_900_2_2 {
+		opp@760000000,900,2,2 {
 			opp-microvolt = <900000 900000 1250000>;
 		};
 
-		opp@760000000_900_1_3 {
+		opp@760000000,900,1,3 {
 			opp-microvolt = <900000 900000 1250000>;
 		};
 
-		opp@760000000_900_2_3 {
+		opp@760000000,900,2,3 {
 			opp-microvolt = <900000 900000 1250000>;
 		};
 
-		opp@760000000_900_1_4 {
+		opp@760000000,900,1,4 {
 			opp-microvolt = <900000 900000 1250000>;
 		};
 
-		opp@760000000_900_2_4 {
+		opp@760000000,900,2,4 {
 			opp-microvolt = <900000 900000 1250000>;
 		};
 
-		opp@760000000_900_1_7 {
+		opp@760000000,900,1,7 {
 			opp-microvolt = <900000 900000 1250000>;
 		};
 
-		opp@760000000_900_2_7 {
+		opp@760000000,900,2,7 {
 			opp-microvolt = <900000 900000 1250000>;
 		};
 
-		opp@760000000_900_1_8 {
+		opp@760000000,900,1,8 {
 			opp-microvolt = <900000 900000 1250000>;
 		};
 
-		opp@760000000_900_2_8 {
+		opp@760000000,900,2,8 {
 			opp-microvolt = <900000 900000 1250000>;
 		};
 
-		opp@760000000_912 {
+		opp@760000000,912 {
 			opp-microvolt = <912000 912000 1250000>;
 		};
 
-		opp@760000000_975 {
+		opp@760000000,975 {
 			opp-microvolt = <975000 975000 1250000>;
 		};
 
-		opp@816000000_850 {
+		opp@816000000,850 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@816000000_912 {
+		opp@816000000,912 {
 			opp-microvolt = <912000 912000 1250000>;
 		};
 
-		opp@860000000_850 {
+		opp@860000000,850 {
 			opp-microvolt = <850000 850000 1250000>;
 		};
 
-		opp@860000000_900 {
+		opp@860000000,900 {
 			opp-microvolt = <900000 900000 1250000>;
 		};
 
-		opp@860000000_900_2_1 {
+		opp@860000000,900,2,1 {
 			opp-microvolt = <900000 900000 1250000>;
 		};
 
-		opp@860000000_900_3_1 {
+		opp@860000000,900,3,1 {
 			opp-microvolt = <900000 900000 1250000>;
 		};
 
-		opp@860000000_900_2_2 {
+		opp@860000000,900,2,2 {
 			opp-microvolt = <900000 900000 1250000>;
 		};
 
-		opp@860000000_900_3_2 {
+		opp@860000000,900,3,2 {
 			opp-microvolt = <900000 900000 1250000>;
 		};
 
-		opp@860000000_900_2_3 {
+		opp@860000000,900,2,3 {
 			opp-microvolt = <900000 900000 1250000>;
 		};
 
-		opp@860000000_900_3_3 {
+		opp@860000000,900,3,3 {
 			opp-microvolt = <900000 900000 1250000>;
 		};
 
-		opp@860000000_900_2_4 {
+		opp@860000000,900,2,4 {
 			opp-microvolt = <900000 900000 1250000>;
 		};
 
-		opp@860000000_900_3_4 {
+		opp@860000000,900,3,4 {
 			opp-microvolt = <900000 900000 1250000>;
 		};
 
-		opp@860000000_900_2_7 {
+		opp@860000000,900,2,7 {
 			opp-microvolt = <900000 900000 1250000>;
 		};
 
-		opp@860000000_900_3_7 {
+		opp@860000000,900,3,7 {
 			opp-microvolt = <900000 900000 1250000>;
 		};
 
-		opp@860000000_900_4_7 {
+		opp@860000000,900,4,7 {
 			opp-microvolt = <900000 900000 1250000>;
 		};
 
-		opp@860000000_900_2_8 {
+		opp@860000000,900,2,8 {
 			opp-microvolt = <900000 900000 1250000>;
 		};
 
-		opp@860000000_900_3_8 {
+		opp@860000000,900,3,8 {
 			opp-microvolt = <900000 900000 1250000>;
 		};
 
-		opp@860000000_900_4_8 {
+		opp@860000000,900,4,8 {
 			opp-microvolt = <900000 900000 1250000>;
 		};
 
-		opp@860000000_975 {
+		opp@860000000,975 {
 			opp-microvolt = <975000 975000 1250000>;
 		};
 
-		opp@860000000_975_1_1 {
+		opp@860000000,975,1,1 {
 			opp-microvolt = <975000 975000 1250000>;
 		};
 
-		opp@860000000_975_1_2 {
+		opp@860000000,975,1,2 {
 			opp-microvolt = <975000 975000 1250000>;
 		};
 
-		opp@860000000_975_1_3 {
+		opp@860000000,975,1,3 {
 			opp-microvolt = <975000 975000 1250000>;
 		};
 
-		opp@860000000_975_1_4 {
+		opp@860000000,975,1,4 {
 			opp-microvolt = <975000 975000 1250000>;
 		};
 
-		opp@860000000_975_1_7 {
+		opp@860000000,975,1,7 {
 			opp-microvolt = <975000 975000 1250000>;
 		};
 
-		opp@860000000_975_1_8 {
+		opp@860000000,975,1,8 {
 			opp-microvolt = <975000 975000 1250000>;
 		};
 
-		opp@860000000_1000 {
+		opp@860000000,1000 {
 			opp-microvolt = <1000000 1000000 1250000>;
 		};
 
-		opp@910000000_900 {
+		opp@910000000,900 {
 			opp-microvolt = <900000 900000 1250000>;
 		};
 
-		opp@1000000000_900 {
+		opp@1000000000,900 {
 			opp-microvolt = <900000 900000 1250000>;
 		};
 
-		opp@1000000000_975 {
+		opp@1000000000,975 {
 			opp-microvolt = <975000 975000 1250000>;
 		};
 
-		opp@1000000000_975_2_1 {
+		opp@1000000000,975,2,1 {
 			opp-microvolt = <975000 975000 1250000>;
 		};
 
-		opp@1000000000_975_3_1 {
+		opp@1000000000,975,3,1 {
 			opp-microvolt = <975000 975000 1250000>;
 		};
 
-		opp@1000000000_975_2_2 {
+		opp@1000000000,975,2,2 {
 			opp-microvolt = <975000 975000 1250000>;
 		};
 
-		opp@1000000000_975_3_2 {
+		opp@1000000000,975,3,2 {
 			opp-microvolt = <975000 975000 1250000>;
 		};
 
-		opp@1000000000_975_2_3 {
+		opp@1000000000,975,2,3 {
 			opp-microvolt = <975000 975000 1250000>;
 		};
 
-		opp@1000000000_975_3_3 {
+		opp@1000000000,975,3,3 {
 			opp-microvolt = <975000 975000 1250000>;
 		};
 
-		opp@1000000000_975_2_4 {
+		opp@1000000000,975,2,4 {
 			opp-microvolt = <975000 975000 1250000>;
 		};
 
-		opp@1000000000_975_3_4 {
+		opp@1000000000,975,3,4 {
 			opp-microvolt = <975000 975000 1250000>;
 		};
 
-		opp@1000000000_975_2_7 {
+		opp@1000000000,975,2,7 {
 			opp-microvolt = <975000 975000 1250000>;
 		};
 
-		opp@1000000000_975_3_7 {
+		opp@1000000000,975,3,7 {
 			opp-microvolt = <975000 975000 1250000>;
 		};
 
-		opp@1000000000_975_4_7 {
+		opp@1000000000,975,4,7 {
 			opp-microvolt = <975000 975000 1250000>;
 		};
 
-		opp@1000000000_975_2_8 {
+		opp@1000000000,975,2,8 {
 			opp-microvolt = <975000 975000 1250000>;
 		};
 
-		opp@1000000000_975_3_8 {
+		opp@1000000000,975,3,8 {
 			opp-microvolt = <975000 975000 1250000>;
 		};
 
-		opp@1000000000_975_4_8 {
+		opp@1000000000,975,4,8 {
 			opp-microvolt = <975000 975000 1250000>;
 		};
 
-		opp@1000000000_1000 {
+		opp@1000000000,1000 {
 			opp-microvolt = <1000000 1000000 1250000>;
 		};
 
-		opp@1000000000_1025 {
+		opp@1000000000,1025 {
 			opp-microvolt = <1025000 1025000 1250000>;
 		};
 
-		opp@1100000000_900 {
+		opp@1100000000,900 {
 			opp-microvolt = <900000 900000 1250000>;
 		};
 
-		opp@1100000000_975 {
+		opp@1100000000,975 {
 			opp-microvolt = <975000 975000 1250000>;
 		};
 
-		opp@1100000000_975_3_1 {
+		opp@1100000000,975,3,1 {
 			opp-microvolt = <975000 975000 1250000>;
 		};
 
-		opp@1100000000_975_3_2 {
+		opp@1100000000,975,3,2 {
 			opp-microvolt = <975000 975000 1250000>;
 		};
 
-		opp@1100000000_975_3_3 {
+		opp@1100000000,975,3,3 {
 			opp-microvolt = <975000 975000 1250000>;
 		};
 
-		opp@1100000000_975_3_4 {
+		opp@1100000000,975,3,4 {
 			opp-microvolt = <975000 975000 1250000>;
 		};
 
-		opp@1100000000_975_3_7 {
+		opp@1100000000,975,3,7 {
 			opp-microvolt = <975000 975000 1250000>;
 		};
 
-		opp@1100000000_975_4_7 {
+		opp@1100000000,975,4,7 {
 			opp-microvolt = <975000 975000 1250000>;
 		};
 
-		opp@1100000000_975_3_8 {
+		opp@1100000000,975,3,8 {
 			opp-microvolt = <975000 975000 1250000>;
 		};
 
-		opp@1100000000_975_4_8 {
+		opp@1100000000,975,4,8 {
 			opp-microvolt = <975000 975000 1250000>;
 		};
 
-		opp@1100000000_1000 {
+		opp@1100000000,1000 {
 			opp-microvolt = <1000000 1000000 1250000>;
 		};
 
-		opp@1100000000_1000_2_1 {
+		opp@1100000000,1000,2,1 {
 			opp-microvolt = <1000000 1000000 1250000>;
 		};
 
-		opp@1100000000_1000_2_2 {
+		opp@1100000000,1000,2,2 {
 			opp-microvolt = <1000000 1000000 1250000>;
 		};
 
-		opp@1100000000_1000_2_3 {
+		opp@1100000000,1000,2,3 {
 			opp-microvolt = <1000000 1000000 1250000>;
 		};
 
-		opp@1100000000_1000_2_4 {
+		opp@1100000000,1000,2,4 {
 			opp-microvolt = <1000000 1000000 1250000>;
 		};
 
-		opp@1100000000_1000_2_7 {
+		opp@1100000000,1000,2,7 {
 			opp-microvolt = <1000000 1000000 1250000>;
 		};
 
-		opp@1100000000_1000_2_8 {
+		opp@1100000000,1000,2,8 {
 			opp-microvolt = <1000000 1000000 1250000>;
 		};
 
-		opp@1100000000_1025 {
+		opp@1100000000,1025 {
 			opp-microvolt = <1025000 1025000 1250000>;
 		};
 
-		opp@1100000000_1075 {
+		opp@1100000000,1075 {
 			opp-microvolt = <1075000 1075000 1250000>;
 		};
 
-		opp@1150000000_975 {
+		opp@1150000000,975 {
 			opp-microvolt = <975000 975000 1250000>;
 		};
 
-		opp@1200000000_975 {
+		opp@1200000000,975 {
 			opp-microvolt = <975000 975000 1250000>;
 		};
 
-		opp@1200000000_1000 {
+		opp@1200000000,1000 {
 			opp-microvolt = <1000000 1000000 1250000>;
 		};
 
-		opp@1200000000_1000_3_1 {
+		opp@1200000000,1000,3,1 {
 			opp-microvolt = <1000000 1000000 1250000>;
 		};
 
-		opp@1200000000_1000_3_2 {
+		opp@1200000000,1000,3,2 {
 			opp-microvolt = <1000000 1000000 1250000>;
 		};
 
-		opp@1200000000_1000_3_3 {
+		opp@1200000000,1000,3,3 {
 			opp-microvolt = <1000000 1000000 1250000>;
 		};
 
-		opp@1200000000_1000_3_4 {
+		opp@1200000000,1000,3,4 {
 			opp-microvolt = <1000000 1000000 1250000>;
 		};
 
-		opp@1200000000_1000_3_7 {
+		opp@1200000000,1000,3,7 {
 			opp-microvolt = <1000000 1000000 1250000>;
 		};
 
-		opp@1200000000_1000_4_7 {
+		opp@1200000000,1000,4,7 {
 			opp-microvolt = <1000000 1000000 1250000>;
 		};
 
-		opp@1200000000_1000_3_8 {
+		opp@1200000000,1000,3,8 {
 			opp-microvolt = <1000000 1000000 1250000>;
 		};
 
-		opp@1200000000_1000_4_8 {
+		opp@1200000000,1000,4,8 {
 			opp-microvolt = <1000000 1000000 1250000>;
 		};
 
-		opp@1200000000_1025 {
+		opp@1200000000,1025 {
 			opp-microvolt = <1025000 1025000 1250000>;
 		};
 
-		opp@1200000000_1025_2_1 {
+		opp@1200000000,1025,2,1 {
 			opp-microvolt = <1025000 1025000 1250000>;
 		};
 
-		opp@1200000000_1025_2_2 {
+		opp@1200000000,1025,2,2 {
 			opp-microvolt = <1025000 1025000 1250000>;
 		};
 
-		opp@1200000000_1025_2_3 {
+		opp@1200000000,1025,2,3 {
 			opp-microvolt = <1025000 1025000 1250000>;
 		};
 
-		opp@1200000000_1025_2_4 {
+		opp@1200000000,1025,2,4 {
 			opp-microvolt = <1025000 1025000 1250000>;
 		};
 
-		opp@1200000000_1025_2_7 {
+		opp@1200000000,1025,2,7 {
 			opp-microvolt = <1025000 1025000 1250000>;
 		};
 
-		opp@1200000000_1025_2_8 {
+		opp@1200000000,1025,2,8 {
 			opp-microvolt = <1025000 1025000 1250000>;
 		};
 
-		opp@1200000000_1050 {
+		opp@1200000000,1050 {
 			opp-microvolt = <1050000 1050000 1250000>;
 		};
 
-		opp@1200000000_1075 {
+		opp@1200000000,1075 {
 			opp-microvolt = <1075000 1075000 1250000>;
 		};
 
-		opp@1200000000_1100 {
+		opp@1200000000,1100 {
 			opp-microvolt = <1100000 1100000 1250000>;
 		};
 
-		opp@1300000000_1000 {
+		opp@1300000000,1000 {
 			opp-microvolt = <1000000 1000000 1250000>;
 		};
 
-		opp@1300000000_1000_4_7 {
+		opp@1300000000,1000,4,7 {
 			opp-microvolt = <1000000 1000000 1250000>;
 		};
 
-		opp@1300000000_1000_4_8 {
+		opp@1300000000,1000,4,8 {
 			opp-microvolt = <1000000 1000000 1250000>;
 		};
 
-		opp@1300000000_1025 {
+		opp@1300000000,1025 {
 			opp-microvolt = <1025000 1025000 1250000>;
 		};
 
-		opp@1300000000_1025_3_1 {
+		opp@1300000000,1025,3,1 {
 			opp-microvolt = <1025000 1025000 1250000>;
 		};
 
-		opp@1300000000_1025_3_7 {
+		opp@1300000000,1025,3,7 {
 			opp-microvolt = <1025000 1025000 1250000>;
 		};
 
-		opp@1300000000_1025_3_8 {
+		opp@1300000000,1025,3,8 {
 			opp-microvolt = <1025000 1025000 1250000>;
 		};
 
-		opp@1300000000_1050 {
+		opp@1300000000,1050 {
 			opp-microvolt = <1050000 1050000 1250000>;
 		};
 
-		opp@1300000000_1050_2_1 {
+		opp@1300000000,1050,2,1 {
 			opp-microvolt = <1050000 1050000 1250000>;
 		};
 
-		opp@1300000000_1050_3_2 {
+		opp@1300000000,1050,3,2 {
 			opp-microvolt = <1050000 1050000 1250000>;
 		};
 
-		opp@1300000000_1050_3_3 {
+		opp@1300000000,1050,3,3 {
 			opp-microvolt = <1050000 1050000 1250000>;
 		};
 
-		opp@1300000000_1050_3_4 {
+		opp@1300000000,1050,3,4 {
 			opp-microvolt = <1050000 1050000 1250000>;
 		};
 
-		opp@1300000000_1050_3_5 {
+		opp@1300000000,1050,3,5 {
 			opp-microvolt = <1050000 1050000 1250000>;
 		};
 
-		opp@1300000000_1050_3_6 {
+		opp@1300000000,1050,3,6 {
 			opp-microvolt = <1050000 1050000 1250000>;
 		};
 
-		opp@1300000000_1050_2_7 {
+		opp@1300000000,1050,2,7 {
 			opp-microvolt = <1050000 1050000 1250000>;
 		};
 
-		opp@1300000000_1050_2_8 {
+		opp@1300000000,1050,2,8 {
 			opp-microvolt = <1050000 1050000 1250000>;
 		};
 
-		opp@1300000000_1050_3_12 {
+		opp@1300000000,1050,3,12 {
 			opp-microvolt = <1050000 1050000 1250000>;
 		};
 
-		opp@1300000000_1050_3_13 {
+		opp@1300000000,1050,3,13 {
 			opp-microvolt = <1050000 1050000 1250000>;
 		};
 
-		opp@1300000000_1075 {
+		opp@1300000000,1075 {
 			opp-microvolt = <1075000 1075000 1250000>;
 		};
 
-		opp@1300000000_1075_2_2 {
+		opp@1300000000,1075,2,2 {
 			opp-microvolt = <1075000 1075000 1250000>;
 		};
 
-		opp@1300000000_1075_2_3 {
+		opp@1300000000,1075,2,3 {
 			opp-microvolt = <1075000 1075000 1250000>;
 		};
 
-		opp@1300000000_1075_2_4 {
+		opp@1300000000,1075,2,4 {
 			opp-microvolt = <1075000 1075000 1250000>;
 		};
 
-		opp@1300000000_1100 {
+		opp@1300000000,1100 {
 			opp-microvolt = <1100000 1100000 1250000>;
 		};
 
-		opp@1300000000_1125 {
+		opp@1300000000,1125 {
 			opp-microvolt = <1125000 1125000 1250000>;
 		};
 
-		opp@1300000000_1150 {
+		opp@1300000000,1150 {
 			opp-microvolt = <1150000 1150000 1250000>;
 		};
 
-		opp@1300000000_1175 {
+		opp@1300000000,1175 {
 			opp-microvolt = <1175000 1175000 1250000>;
 		};
 
-		opp@1400000000_1100 {
+		opp@1400000000,1100 {
 			opp-microvolt = <1100000 1100000 1250000>;
 		};
 
-		opp@1400000000_1125 {
+		opp@1400000000,1125 {
 			opp-microvolt = <1125000 1125000 1250000>;
 		};
 
-		opp@1400000000_1150 {
+		opp@1400000000,1150 {
 			opp-microvolt = <1150000 1150000 1250000>;
 		};
 
-		opp@1400000000_1150_2_4 {
+		opp@1400000000,1150,2,4 {
 			opp-microvolt = <1150000 1150000 1250000>;
 		};
 
-		opp@1400000000_1175 {
+		opp@1400000000,1175 {
 			opp-microvolt = <1175000 1175000 1250000>;
 		};
 
-		opp@1400000000_1237 {
+		opp@1400000000,1237 {
 			opp-microvolt = <1237000 1237000 1250000>;
 		};
 
-		opp@1500000000_1125 {
+		opp@1500000000,1125 {
 			opp-microvolt = <1125000 1125000 1250000>;
 		};
 
-		opp@1500000000_1125_4_5 {
+		opp@1500000000,1125,4,5 {
 			opp-microvolt = <1125000 1125000 1250000>;
 		};
 
-		opp@1500000000_1125_4_6 {
+		opp@1500000000,1125,4,6 {
 			opp-microvolt = <1125000 1125000 1250000>;
 		};
 
-		opp@1500000000_1125_4_12 {
+		opp@1500000000,1125,4,12 {
 			opp-microvolt = <1125000 1125000 1250000>;
 		};
 
-		opp@1500000000_1125_4_13 {
+		opp@1500000000,1125,4,13 {
 			opp-microvolt = <1125000 1125000 1250000>;
 		};
 
-		opp@1500000000_1150 {
+		opp@1500000000,1150 {
 			opp-microvolt = <1150000 1150000 1250000>;
 		};
 
-		opp@1500000000_1150_3_5 {
+		opp@1500000000,1150,3,5 {
 			opp-microvolt = <1150000 1150000 1250000>;
 		};
 
-		opp@1500000000_1150_3_6 {
+		opp@1500000000,1150,3,6 {
 			opp-microvolt = <1150000 1150000 1250000>;
 		};
 
-		opp@1500000000_1150_3_12 {
+		opp@1500000000,1150,3,12 {
 			opp-microvolt = <1150000 1150000 1250000>;
 		};
 
-		opp@1500000000_1150_3_13 {
+		opp@1500000000,1150,3,13 {
 			opp-microvolt = <1150000 1150000 1250000>;
 		};
 
-		opp@1500000000_1200 {
+		opp@1500000000,1200 {
 			opp-microvolt = <1200000 1200000 1250000>;
 		};
 
-		opp@1500000000_1237 {
+		opp@1500000000,1237 {
 			opp-microvolt = <1237000 1237000 1250000>;
 		};
 
-		opp@1600000000_1212 {
+		opp@1600000000,1212 {
 			opp-microvolt = <1212000 1212000 1250000>;
 		};
 
-		opp@1600000000_1237 {
+		opp@1600000000,1237 {
 			opp-microvolt = <1237000 1237000 1250000>;
 		};
 
-		opp@1700000000_1212 {
+		opp@1700000000,1212 {
 			opp-microvolt = <1212000 1212000 1250000>;
 		};
 
-		opp@1700000000_1237 {
+		opp@1700000000,1237 {
 			opp-microvolt = <1237000 1237000 1250000>;
 		};
 	};
diff --git a/arch/arm/boot/dts/tegra30-cpu-opp.dtsi b/arch/arm/boot/dts/tegra30-cpu-opp.dtsi
index d64fc262585e..8e434f6713cd 100644
--- a/arch/arm/boot/dts/tegra30-cpu-opp.dtsi
+++ b/arch/arm/boot/dts/tegra30-cpu-opp.dtsi
@@ -5,1195 +5,1195 @@
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp@51000000_800 {
+		opp@51000000,800 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x31FE>;
 			opp-hz = /bits/ 64 <51000000>;
 		};
 
-		opp@51000000_850 {
+		opp@51000000,850 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0C01>;
 			opp-hz = /bits/ 64 <51000000>;
 		};
 
-		opp@51000000_912 {
+		opp@51000000,912 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0200>;
 			opp-hz = /bits/ 64 <51000000>;
 		};
 
-		opp@102000000_800 {
+		opp@102000000,800 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x31FE>;
 			opp-hz = /bits/ 64 <102000000>;
 		};
 
-		opp@102000000_850 {
+		opp@102000000,850 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0C01>;
 			opp-hz = /bits/ 64 <102000000>;
 		};
 
-		opp@102000000_912 {
+		opp@102000000,912 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0200>;
 			opp-hz = /bits/ 64 <102000000>;
 		};
 
-		opp@204000000_800 {
+		opp@204000000,800 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x31FE>;
 			opp-hz = /bits/ 64 <204000000>;
 		};
 
-		opp@204000000_850 {
+		opp@204000000,850 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0C01>;
 			opp-hz = /bits/ 64 <204000000>;
 		};
 
-		opp@204000000_912 {
+		opp@204000000,912 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0200>;
 			opp-hz = /bits/ 64 <204000000>;
 		};
 
-		opp@312000000_850 {
+		opp@312000000,850 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0C00>;
 			opp-hz = /bits/ 64 <312000000>;
 		};
 
-		opp@312000000_912 {
+		opp@312000000,912 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0200>;
 			opp-hz = /bits/ 64 <312000000>;
 		};
 
-		opp@340000000_800 {
+		opp@340000000,800 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0192>;
 			opp-hz = /bits/ 64 <340000000>;
 		};
 
-		opp@340000000_850 {
+		opp@340000000,850 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x0F 0x0001>;
 			opp-hz = /bits/ 64 <340000000>;
 		};
 
-		opp@370000000_800 {
+		opp@370000000,800 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1E 0x306C>;
 			opp-hz = /bits/ 64 <370000000>;
 		};
 
-		opp@456000000_850 {
+		opp@456000000,850 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0C00>;
 			opp-hz = /bits/ 64 <456000000>;
 		};
 
-		opp@456000000_912 {
+		opp@456000000,912 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0200>;
 			opp-hz = /bits/ 64 <456000000>;
 		};
 
-		opp@475000000_800 {
+		opp@475000000,800 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1E 0x31FE>;
 			opp-hz = /bits/ 64 <475000000>;
 		};
 
-		opp@475000000_850 {
+		opp@475000000,850 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x0F 0x0001>;
 			opp-hz = /bits/ 64 <475000000>;
 		};
 
-		opp@475000000_850_0_1 {
+		opp@475000000,850,0,1 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0002>;
 			opp-hz = /bits/ 64 <475000000>;
 		};
 
-		opp@475000000_850_0_4 {
+		opp@475000000,850,0,4 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0010>;
 			opp-hz = /bits/ 64 <475000000>;
 		};
 
-		opp@475000000_850_0_7 {
+		opp@475000000,850,0,7 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0080>;
 			opp-hz = /bits/ 64 <475000000>;
 		};
 
-		opp@475000000_850_0_8 {
+		opp@475000000,850,0,8 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0100>;
 			opp-hz = /bits/ 64 <475000000>;
 		};
 
-		opp@608000000_850 {
+		opp@608000000,850 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0400>;
 			opp-hz = /bits/ 64 <608000000>;
 		};
 
-		opp@608000000_912 {
+		opp@608000000,912 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0200>;
 			opp-hz = /bits/ 64 <608000000>;
 		};
 
-		opp@620000000_850 {
+		opp@620000000,850 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1E 0x306C>;
 			opp-hz = /bits/ 64 <620000000>;
 		};
 
-		opp@640000000_850 {
+		opp@640000000,850 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x0F 0x0001>;
 			opp-hz = /bits/ 64 <640000000>;
 		};
 
-		opp@640000000_850_1_1 {
+		opp@640000000,850,1,1 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x02 0x0002>;
 			opp-hz = /bits/ 64 <640000000>;
 		};
 
-		opp@640000000_850_2_1 {
+		opp@640000000,850,2,1 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x04 0x0002>;
 			opp-hz = /bits/ 64 <640000000>;
 		};
 
-		opp@640000000_850_3_1 {
+		opp@640000000,850,3,1 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0002>;
 			opp-hz = /bits/ 64 <640000000>;
 		};
 
-		opp@640000000_850_1_4 {
+		opp@640000000,850,1,4 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x02 0x0010>;
 			opp-hz = /bits/ 64 <640000000>;
 		};
 
-		opp@640000000_850_2_4 {
+		opp@640000000,850,2,4 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x04 0x0010>;
 			opp-hz = /bits/ 64 <640000000>;
 		};
 
-		opp@640000000_850_3_4 {
+		opp@640000000,850,3,4 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0010>;
 			opp-hz = /bits/ 64 <640000000>;
 		};
 
-		opp@640000000_850_1_7 {
+		opp@640000000,850,1,7 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x02 0x0080>;
 			opp-hz = /bits/ 64 <640000000>;
 		};
 
-		opp@640000000_850_2_7 {
+		opp@640000000,850,2,7 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x04 0x0080>;
 			opp-hz = /bits/ 64 <640000000>;
 		};
 
-		opp@640000000_850_3_7 {
+		opp@640000000,850,3,7 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0080>;
 			opp-hz = /bits/ 64 <640000000>;
 		};
 
-		opp@640000000_850_4_7 {
+		opp@640000000,850,4,7 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x10 0x0080>;
 			opp-hz = /bits/ 64 <640000000>;
 		};
 
-		opp@640000000_850_1_8 {
+		opp@640000000,850,1,8 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x02 0x0100>;
 			opp-hz = /bits/ 64 <640000000>;
 		};
 
-		opp@640000000_850_2_8 {
+		opp@640000000,850,2,8 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x04 0x0100>;
 			opp-hz = /bits/ 64 <640000000>;
 		};
 
-		opp@640000000_850_3_8 {
+		opp@640000000,850,3,8 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0100>;
 			opp-hz = /bits/ 64 <640000000>;
 		};
 
-		opp@640000000_850_4_8 {
+		opp@640000000,850,4,8 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x10 0x0100>;
 			opp-hz = /bits/ 64 <640000000>;
 		};
 
-		opp@640000000_900 {
+		opp@640000000,900 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0192>;
 			opp-hz = /bits/ 64 <640000000>;
 		};
 
-		opp@760000000_850 {
+		opp@760000000,850 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1E 0x3461>;
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@760000000_850_3_1 {
+		opp@760000000,850,3,1 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0002>;
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@760000000_850_3_2 {
+		opp@760000000,850,3,2 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0004>;
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@760000000_850_3_3 {
+		opp@760000000,850,3,3 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0008>;
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@760000000_850_3_4 {
+		opp@760000000,850,3,4 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0010>;
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@760000000_850_3_7 {
+		opp@760000000,850,3,7 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0080>;
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@760000000_850_4_7 {
+		opp@760000000,850,4,7 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x10 0x0080>;
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@760000000_850_3_8 {
+		opp@760000000,850,3,8 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0100>;
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@760000000_850_4_8 {
+		opp@760000000,850,4,8 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x10 0x0100>;
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@760000000_850_0_10 {
+		opp@760000000,850,0,10 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0400>;
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@760000000_900 {
+		opp@760000000,900 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0001>;
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@760000000_900_1_1 {
+		opp@760000000,900,1,1 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x02 0x0002>;
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@760000000_900_2_1 {
+		opp@760000000,900,2,1 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x04 0x0002>;
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@760000000_900_1_2 {
+		opp@760000000,900,1,2 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x02 0x0004>;
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@760000000_900_2_2 {
+		opp@760000000,900,2,2 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x04 0x0004>;
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@760000000_900_1_3 {
+		opp@760000000,900,1,3 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x02 0x0008>;
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@760000000_900_2_3 {
+		opp@760000000,900,2,3 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x04 0x0008>;
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@760000000_900_1_4 {
+		opp@760000000,900,1,4 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x02 0x0010>;
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@760000000_900_2_4 {
+		opp@760000000,900,2,4 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x04 0x0010>;
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@760000000_900_1_7 {
+		opp@760000000,900,1,7 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x02 0x0080>;
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@760000000_900_2_7 {
+		opp@760000000,900,2,7 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x04 0x0080>;
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@760000000_900_1_8 {
+		opp@760000000,900,1,8 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x02 0x0100>;
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@760000000_900_2_8 {
+		opp@760000000,900,2,8 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x04 0x0100>;
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@760000000_912 {
+		opp@760000000,912 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0200>;
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@760000000_975 {
+		opp@760000000,975 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0192>;
 			opp-hz = /bits/ 64 <760000000>;
 		};
 
-		opp@816000000_850 {
+		opp@816000000,850 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0400>;
 			opp-hz = /bits/ 64 <816000000>;
 		};
 
-		opp@816000000_912 {
+		opp@816000000,912 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x1F 0x0200>;
 			opp-hz = /bits/ 64 <816000000>;
 		};
 
-		opp@860000000_850 {
+		opp@860000000,850 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x0C 0x0001>;
 			opp-hz = /bits/ 64 <860000000>;
 		};
 
-		opp@860000000_900 {
+		opp@860000000,900 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x02 0x0001>;
 			opp-hz = /bits/ 64 <860000000>;
 		};
 
-		opp@860000000_900_2_1 {
+		opp@860000000,900,2,1 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x04 0x0002>;
 			opp-hz = /bits/ 64 <860000000>;
 		};
 
-		opp@860000000_900_3_1 {
+		opp@860000000,900,3,1 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0002>;
 			opp-hz = /bits/ 64 <860000000>;
 		};
 
-		opp@860000000_900_2_2 {
+		opp@860000000,900,2,2 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x04 0x0004>;
 			opp-hz = /bits/ 64 <860000000>;
 		};
 
-		opp@860000000_900_3_2 {
+		opp@860000000,900,3,2 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0004>;
 			opp-hz = /bits/ 64 <860000000>;
 		};
 
-		opp@860000000_900_2_3 {
+		opp@860000000,900,2,3 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x04 0x0008>;
 			opp-hz = /bits/ 64 <860000000>;
 		};
 
-		opp@860000000_900_3_3 {
+		opp@860000000,900,3,3 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0008>;
 			opp-hz = /bits/ 64 <860000000>;
 		};
 
-		opp@860000000_900_2_4 {
+		opp@860000000,900,2,4 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x04 0x0010>;
 			opp-hz = /bits/ 64 <860000000>;
 		};
 
-		opp@860000000_900_3_4 {
+		opp@860000000,900,3,4 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0010>;
 			opp-hz = /bits/ 64 <860000000>;
 		};
 
-		opp@860000000_900_2_7 {
+		opp@860000000,900,2,7 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x04 0x0080>;
 			opp-hz = /bits/ 64 <860000000>;
 		};
 
-		opp@860000000_900_3_7 {
+		opp@860000000,900,3,7 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0080>;
 			opp-hz = /bits/ 64 <860000000>;
 		};
 
-		opp@860000000_900_4_7 {
+		opp@860000000,900,4,7 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x10 0x0080>;
 			opp-hz = /bits/ 64 <860000000>;
 		};
 
-		opp@860000000_900_2_8 {
+		opp@860000000,900,2,8 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x04 0x0100>;
 			opp-hz = /bits/ 64 <860000000>;
 		};
 
-		opp@860000000_900_3_8 {
+		opp@860000000,900,3,8 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0100>;
 			opp-hz = /bits/ 64 <860000000>;
 		};
 
-		opp@860000000_900_4_8 {
+		opp@860000000,900,4,8 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x10 0x0100>;
 			opp-hz = /bits/ 64 <860000000>;
 		};
 
-		opp@860000000_975 {
+		opp@860000000,975 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0001>;
 			opp-hz = /bits/ 64 <860000000>;
 		};
 
-		opp@860000000_975_1_1 {
+		opp@860000000,975,1,1 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x02 0x0002>;
 			opp-hz = /bits/ 64 <860000000>;
 		};
 
-		opp@860000000_975_1_2 {
+		opp@860000000,975,1,2 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x02 0x0004>;
 			opp-hz = /bits/ 64 <860000000>;
 		};
 
-		opp@860000000_975_1_3 {
+		opp@860000000,975,1,3 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x02 0x0008>;
 			opp-hz = /bits/ 64 <860000000>;
 		};
 
-		opp@860000000_975_1_4 {
+		opp@860000000,975,1,4 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x02 0x0010>;
 			opp-hz = /bits/ 64 <860000000>;
 		};
 
-		opp@860000000_975_1_7 {
+		opp@860000000,975,1,7 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x02 0x0080>;
 			opp-hz = /bits/ 64 <860000000>;
 		};
 
-		opp@860000000_975_1_8 {
+		opp@860000000,975,1,8 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x02 0x0100>;
 			opp-hz = /bits/ 64 <860000000>;
 		};
 
-		opp@860000000_1000 {
+		opp@860000000,1000 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0192>;
 			opp-hz = /bits/ 64 <860000000>;
 		};
 
-		opp@910000000_900 {
+		opp@910000000,900 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x18 0x3060>;
 			opp-hz = /bits/ 64 <910000000>;
 		};
 
-		opp@1000000000_900 {
+		opp@1000000000,900 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x0C 0x0001>;
 			opp-hz = /bits/ 64 <1000000000>;
 		};
 
-		opp@1000000000_975 {
+		opp@1000000000,975 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x03 0x0001>;
 			opp-hz = /bits/ 64 <1000000000>;
 		};
 
-		opp@1000000000_975_2_1 {
+		opp@1000000000,975,2,1 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x04 0x0002>;
 			opp-hz = /bits/ 64 <1000000000>;
 		};
 
-		opp@1000000000_975_3_1 {
+		opp@1000000000,975,3,1 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0002>;
 			opp-hz = /bits/ 64 <1000000000>;
 		};
 
-		opp@1000000000_975_2_2 {
+		opp@1000000000,975,2,2 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x04 0x0004>;
 			opp-hz = /bits/ 64 <1000000000>;
 		};
 
-		opp@1000000000_975_3_2 {
+		opp@1000000000,975,3,2 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0004>;
 			opp-hz = /bits/ 64 <1000000000>;
 		};
 
-		opp@1000000000_975_2_3 {
+		opp@1000000000,975,2,3 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x04 0x0008>;
 			opp-hz = /bits/ 64 <1000000000>;
 		};
 
-		opp@1000000000_975_3_3 {
+		opp@1000000000,975,3,3 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0008>;
 			opp-hz = /bits/ 64 <1000000000>;
 		};
 
-		opp@1000000000_975_2_4 {
+		opp@1000000000,975,2,4 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x04 0x0010>;
 			opp-hz = /bits/ 64 <1000000000>;
 		};
 
-		opp@1000000000_975_3_4 {
+		opp@1000000000,975,3,4 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0010>;
 			opp-hz = /bits/ 64 <1000000000>;
 		};
 
-		opp@1000000000_975_2_7 {
+		opp@1000000000,975,2,7 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x04 0x0080>;
 			opp-hz = /bits/ 64 <1000000000>;
 		};
 
-		opp@1000000000_975_3_7 {
+		opp@1000000000,975,3,7 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0080>;
 			opp-hz = /bits/ 64 <1000000000>;
 		};
 
-		opp@1000000000_975_4_7 {
+		opp@1000000000,975,4,7 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x10 0x0080>;
 			opp-hz = /bits/ 64 <1000000000>;
 		};
 
-		opp@1000000000_975_2_8 {
+		opp@1000000000,975,2,8 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x04 0x0100>;
 			opp-hz = /bits/ 64 <1000000000>;
 		};
 
-		opp@1000000000_975_3_8 {
+		opp@1000000000,975,3,8 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0100>;
 			opp-hz = /bits/ 64 <1000000000>;
 		};
 
-		opp@1000000000_975_4_8 {
+		opp@1000000000,975,4,8 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x10 0x0100>;
 			opp-hz = /bits/ 64 <1000000000>;
 		};
 
-		opp@1000000000_1000 {
+		opp@1000000000,1000 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x02 0x019E>;
 			opp-hz = /bits/ 64 <1000000000>;
 		};
 
-		opp@1000000000_1025 {
+		opp@1000000000,1025 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0192>;
 			opp-hz = /bits/ 64 <1000000000>;
 		};
 
-		opp@1100000000_900 {
+		opp@1100000000,900 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0001>;
 			opp-hz = /bits/ 64 <1100000000>;
 		};
 
-		opp@1100000000_975 {
+		opp@1100000000,975 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x06 0x0001>;
 			opp-hz = /bits/ 64 <1100000000>;
 		};
 
-		opp@1100000000_975_3_1 {
+		opp@1100000000,975,3,1 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0002>;
 			opp-hz = /bits/ 64 <1100000000>;
 		};
 
-		opp@1100000000_975_3_2 {
+		opp@1100000000,975,3,2 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0004>;
 			opp-hz = /bits/ 64 <1100000000>;
 		};
 
-		opp@1100000000_975_3_3 {
+		opp@1100000000,975,3,3 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0008>;
 			opp-hz = /bits/ 64 <1100000000>;
 		};
 
-		opp@1100000000_975_3_4 {
+		opp@1100000000,975,3,4 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0010>;
 			opp-hz = /bits/ 64 <1100000000>;
 		};
 
-		opp@1100000000_975_3_7 {
+		opp@1100000000,975,3,7 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0080>;
 			opp-hz = /bits/ 64 <1100000000>;
 		};
 
-		opp@1100000000_975_4_7 {
+		opp@1100000000,975,4,7 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x10 0x0080>;
 			opp-hz = /bits/ 64 <1100000000>;
 		};
 
-		opp@1100000000_975_3_8 {
+		opp@1100000000,975,3,8 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0100>;
 			opp-hz = /bits/ 64 <1100000000>;
 		};
 
-		opp@1100000000_975_4_8 {
+		opp@1100000000,975,4,8 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x10 0x0100>;
 			opp-hz = /bits/ 64 <1100000000>;
 		};
 
-		opp@1100000000_1000 {
+		opp@1100000000,1000 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0001>;
 			opp-hz = /bits/ 64 <1100000000>;
 		};
 
-		opp@1100000000_1000_2_1 {
+		opp@1100000000,1000,2,1 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x04 0x0002>;
 			opp-hz = /bits/ 64 <1100000000>;
 		};
 
-		opp@1100000000_1000_2_2 {
+		opp@1100000000,1000,2,2 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x04 0x0004>;
 			opp-hz = /bits/ 64 <1100000000>;
 		};
 
-		opp@1100000000_1000_2_3 {
+		opp@1100000000,1000,2,3 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x04 0x0008>;
 			opp-hz = /bits/ 64 <1100000000>;
 		};
 
-		opp@1100000000_1000_2_4 {
+		opp@1100000000,1000,2,4 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x04 0x0010>;
 			opp-hz = /bits/ 64 <1100000000>;
 		};
 
-		opp@1100000000_1000_2_7 {
+		opp@1100000000,1000,2,7 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x04 0x0080>;
 			opp-hz = /bits/ 64 <1100000000>;
 		};
 
-		opp@1100000000_1000_2_8 {
+		opp@1100000000,1000,2,8 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x04 0x0100>;
 			opp-hz = /bits/ 64 <1100000000>;
 		};
 
-		opp@1100000000_1025 {
+		opp@1100000000,1025 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x02 0x019E>;
 			opp-hz = /bits/ 64 <1100000000>;
 		};
 
-		opp@1100000000_1075 {
+		opp@1100000000,1075 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0192>;
 			opp-hz = /bits/ 64 <1100000000>;
 		};
 
-		opp@1150000000_975 {
+		opp@1150000000,975 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x18 0x3060>;
 			opp-hz = /bits/ 64 <1150000000>;
 		};
 
-		opp@1200000000_975 {
+		opp@1200000000,975 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0001>;
 			opp-hz = /bits/ 64 <1200000000>;
 		};
 
-		opp@1200000000_1000 {
+		opp@1200000000,1000 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x04 0x0001>;
 			opp-hz = /bits/ 64 <1200000000>;
 		};
 
-		opp@1200000000_1000_3_1 {
+		opp@1200000000,1000,3,1 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0002>;
 			opp-hz = /bits/ 64 <1200000000>;
 		};
 
-		opp@1200000000_1000_3_2 {
+		opp@1200000000,1000,3,2 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0004>;
 			opp-hz = /bits/ 64 <1200000000>;
 		};
 
-		opp@1200000000_1000_3_3 {
+		opp@1200000000,1000,3,3 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0008>;
 			opp-hz = /bits/ 64 <1200000000>;
 		};
 
-		opp@1200000000_1000_3_4 {
+		opp@1200000000,1000,3,4 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0010>;
 			opp-hz = /bits/ 64 <1200000000>;
 		};
 
-		opp@1200000000_1000_3_7 {
+		opp@1200000000,1000,3,7 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0080>;
 			opp-hz = /bits/ 64 <1200000000>;
 		};
 
-		opp@1200000000_1000_4_7 {
+		opp@1200000000,1000,4,7 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x10 0x0080>;
 			opp-hz = /bits/ 64 <1200000000>;
 		};
 
-		opp@1200000000_1000_3_8 {
+		opp@1200000000,1000,3,8 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0100>;
 			opp-hz = /bits/ 64 <1200000000>;
 		};
 
-		opp@1200000000_1000_4_8 {
+		opp@1200000000,1000,4,8 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x10 0x0100>;
 			opp-hz = /bits/ 64 <1200000000>;
 		};
 
-		opp@1200000000_1025 {
+		opp@1200000000,1025 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x02 0x0001>;
 			opp-hz = /bits/ 64 <1200000000>;
 		};
 
-		opp@1200000000_1025_2_1 {
+		opp@1200000000,1025,2,1 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x04 0x0002>;
 			opp-hz = /bits/ 64 <1200000000>;
 		};
 
-		opp@1200000000_1025_2_2 {
+		opp@1200000000,1025,2,2 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x04 0x0004>;
 			opp-hz = /bits/ 64 <1200000000>;
 		};
 
-		opp@1200000000_1025_2_3 {
+		opp@1200000000,1025,2,3 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x04 0x0008>;
 			opp-hz = /bits/ 64 <1200000000>;
 		};
 
-		opp@1200000000_1025_2_4 {
+		opp@1200000000,1025,2,4 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x04 0x0010>;
 			opp-hz = /bits/ 64 <1200000000>;
 		};
 
-		opp@1200000000_1025_2_7 {
+		opp@1200000000,1025,2,7 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x04 0x0080>;
 			opp-hz = /bits/ 64 <1200000000>;
 		};
 
-		opp@1200000000_1025_2_8 {
+		opp@1200000000,1025,2,8 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x04 0x0100>;
 			opp-hz = /bits/ 64 <1200000000>;
 		};
 
-		opp@1200000000_1050 {
+		opp@1200000000,1050 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x02 0x019E>;
 			opp-hz = /bits/ 64 <1200000000>;
 		};
 
-		opp@1200000000_1075 {
+		opp@1200000000,1075 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0001>;
 			opp-hz = /bits/ 64 <1200000000>;
 		};
 
-		opp@1200000000_1100 {
+		opp@1200000000,1100 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0192>;
 			opp-hz = /bits/ 64 <1200000000>;
 		};
 
-		opp@1300000000_1000 {
+		opp@1300000000,1000 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0001>;
 			opp-hz = /bits/ 64 <1300000000>;
 		};
 
-		opp@1300000000_1000_4_7 {
+		opp@1300000000,1000,4,7 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x10 0x0080>;
 			opp-hz = /bits/ 64 <1300000000>;
 		};
 
-		opp@1300000000_1000_4_8 {
+		opp@1300000000,1000,4,8 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x10 0x0100>;
 			opp-hz = /bits/ 64 <1300000000>;
 		};
 
-		opp@1300000000_1025 {
+		opp@1300000000,1025 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x04 0x0001>;
 			opp-hz = /bits/ 64 <1300000000>;
 		};
 
-		opp@1300000000_1025_3_1 {
+		opp@1300000000,1025,3,1 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0002>;
 			opp-hz = /bits/ 64 <1300000000>;
 		};
 
-		opp@1300000000_1025_3_7 {
+		opp@1300000000,1025,3,7 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0080>;
 			opp-hz = /bits/ 64 <1300000000>;
 		};
 
-		opp@1300000000_1025_3_8 {
+		opp@1300000000,1025,3,8 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0100>;
 			opp-hz = /bits/ 64 <1300000000>;
 		};
 
-		opp@1300000000_1050 {
+		opp@1300000000,1050 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x12 0x3061>;
 			opp-hz = /bits/ 64 <1300000000>;
 		};
 
-		opp@1300000000_1050_2_1 {
+		opp@1300000000,1050,2,1 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x04 0x0002>;
 			opp-hz = /bits/ 64 <1300000000>;
 		};
 
-		opp@1300000000_1050_3_2 {
+		opp@1300000000,1050,3,2 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0004>;
 			opp-hz = /bits/ 64 <1300000000>;
 		};
 
-		opp@1300000000_1050_3_3 {
+		opp@1300000000,1050,3,3 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0008>;
 			opp-hz = /bits/ 64 <1300000000>;
 		};
 
-		opp@1300000000_1050_3_4 {
+		opp@1300000000,1050,3,4 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0010>;
 			opp-hz = /bits/ 64 <1300000000>;
 		};
 
-		opp@1300000000_1050_3_5 {
+		opp@1300000000,1050,3,5 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0020>;
 			opp-hz = /bits/ 64 <1300000000>;
 		};
 
-		opp@1300000000_1050_3_6 {
+		opp@1300000000,1050,3,6 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0040>;
 			opp-hz = /bits/ 64 <1300000000>;
 		};
 
-		opp@1300000000_1050_2_7 {
+		opp@1300000000,1050,2,7 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x04 0x0080>;
 			opp-hz = /bits/ 64 <1300000000>;
 		};
 
-		opp@1300000000_1050_2_8 {
+		opp@1300000000,1050,2,8 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x04 0x0100>;
 			opp-hz = /bits/ 64 <1300000000>;
 		};
 
-		opp@1300000000_1050_3_12 {
+		opp@1300000000,1050,3,12 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x1000>;
 			opp-hz = /bits/ 64 <1300000000>;
 		};
 
-		opp@1300000000_1050_3_13 {
+		opp@1300000000,1050,3,13 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x2000>;
 			opp-hz = /bits/ 64 <1300000000>;
 		};
 
-		opp@1300000000_1075 {
+		opp@1300000000,1075 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x02 0x0182>;
 			opp-hz = /bits/ 64 <1300000000>;
 		};
 
-		opp@1300000000_1075_2_2 {
+		opp@1300000000,1075,2,2 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x04 0x0004>;
 			opp-hz = /bits/ 64 <1300000000>;
 		};
 
-		opp@1300000000_1075_2_3 {
+		opp@1300000000,1075,2,3 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x04 0x0008>;
 			opp-hz = /bits/ 64 <1300000000>;
 		};
 
-		opp@1300000000_1075_2_4 {
+		opp@1300000000,1075,2,4 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x04 0x0010>;
 			opp-hz = /bits/ 64 <1300000000>;
 		};
 
-		opp@1300000000_1100 {
+		opp@1300000000,1100 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x02 0x001C>;
 			opp-hz = /bits/ 64 <1300000000>;
 		};
 
-		opp@1300000000_1125 {
+		opp@1300000000,1125 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0001>;
 			opp-hz = /bits/ 64 <1300000000>;
 		};
 
-		opp@1300000000_1150 {
+		opp@1300000000,1150 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0182>;
 			opp-hz = /bits/ 64 <1300000000>;
 		};
 
-		opp@1300000000_1175 {
+		opp@1300000000,1175 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0010>;
 			opp-hz = /bits/ 64 <1300000000>;
 		};
 
-		opp@1400000000_1100 {
+		opp@1400000000,1100 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x18 0x307C>;
 			opp-hz = /bits/ 64 <1400000000>;
 		};
 
-		opp@1400000000_1125 {
+		opp@1400000000,1125 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x04 0x000C>;
 			opp-hz = /bits/ 64 <1400000000>;
 		};
 
-		opp@1400000000_1150 {
+		opp@1400000000,1150 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x02 0x000C>;
 			opp-hz = /bits/ 64 <1400000000>;
 		};
 
-		opp@1400000000_1150_2_4 {
+		opp@1400000000,1150,2,4 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x04 0x0010>;
 			opp-hz = /bits/ 64 <1400000000>;
 		};
 
-		opp@1400000000_1175 {
+		opp@1400000000,1175 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x02 0x0010>;
 			opp-hz = /bits/ 64 <1400000000>;
 		};
 
-		opp@1400000000_1237 {
+		opp@1400000000,1237 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0010>;
 			opp-hz = /bits/ 64 <1400000000>;
 		};
 
-		opp@1500000000_1125 {
+		opp@1500000000,1125 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0010>;
 			opp-hz = /bits/ 64 <1500000000>;
 		};
 
-		opp@1500000000_1125_4_5 {
+		opp@1500000000,1125,4,5 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x10 0x0020>;
 			opp-hz = /bits/ 64 <1500000000>;
 		};
 
-		opp@1500000000_1125_4_6 {
+		opp@1500000000,1125,4,6 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x10 0x0040>;
 			opp-hz = /bits/ 64 <1500000000>;
 		};
 
-		opp@1500000000_1125_4_12 {
+		opp@1500000000,1125,4,12 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x10 0x1000>;
 			opp-hz = /bits/ 64 <1500000000>;
 		};
 
-		opp@1500000000_1125_4_13 {
+		opp@1500000000,1125,4,13 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x10 0x2000>;
 			opp-hz = /bits/ 64 <1500000000>;
 		};
 
-		opp@1500000000_1150 {
+		opp@1500000000,1150 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x04 0x0010>;
 			opp-hz = /bits/ 64 <1500000000>;
 		};
 
-		opp@1500000000_1150_3_5 {
+		opp@1500000000,1150,3,5 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0020>;
 			opp-hz = /bits/ 64 <1500000000>;
 		};
 
-		opp@1500000000_1150_3_6 {
+		opp@1500000000,1150,3,6 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x0040>;
 			opp-hz = /bits/ 64 <1500000000>;
 		};
 
-		opp@1500000000_1150_3_12 {
+		opp@1500000000,1150,3,12 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x1000>;
 			opp-hz = /bits/ 64 <1500000000>;
 		};
 
-		opp@1500000000_1150_3_13 {
+		opp@1500000000,1150,3,13 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x2000>;
 			opp-hz = /bits/ 64 <1500000000>;
 		};
 
-		opp@1500000000_1200 {
+		opp@1500000000,1200 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x02 0x0010>;
 			opp-hz = /bits/ 64 <1500000000>;
 		};
 
-		opp@1500000000_1237 {
+		opp@1500000000,1237 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x01 0x0010>;
 			opp-hz = /bits/ 64 <1500000000>;
 		};
 
-		opp@1600000000_1212 {
+		opp@1600000000,1212 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x10 0x3060>;
 			opp-hz = /bits/ 64 <1600000000>;
 		};
 
-		opp@1600000000_1237 {
+		opp@1600000000,1237 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x3060>;
 			opp-hz = /bits/ 64 <1600000000>;
 		};
 
-		opp@1700000000_1212 {
+		opp@1700000000,1212 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x10 0x3060>;
 			opp-hz = /bits/ 64 <1700000000>;
 		};
 
-		opp@1700000000_1237 {
+		opp@1700000000,1237 {
 			clock-latency-ns = <100000>;
 			opp-supported-hw = <0x08 0x3060>;
 			opp-hz = /bits/ 64 <1700000000>;
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index d2d05f1da274..aeae8c092d41 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -20,12 +20,12 @@
 	pcie@3000 {
 		compatible = "nvidia,tegra30-pcie";
 		device_type = "pci";
-		reg = <0x00003000 0x00000800   /* PADS registers */
-		       0x00003800 0x00000200   /* AFI registers */
-		       0x10000000 0x10000000>; /* configuration space */
+		reg = <0x00003000 0x00000800>, /* PADS registers */
+		      <0x00003800 0x00000200>, /* AFI registers */
+		      <0x10000000 0x10000000>; /* configuration space */
 		reg-names = "pads", "afi", "cs";
-		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH   /* controller interrupt */
-			      GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+			     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
 		interrupt-names = "intr", "msi";
 
 		#interrupt-cells = <1>;
@@ -36,12 +36,12 @@
 		#address-cells = <3>;
 		#size-cells = <2>;
 
-		ranges = <0x82000000 0 0x00000000 0x00000000 0 0x00001000   /* port 0 configuration space */
-			  0x82000000 0 0x00001000 0x00001000 0 0x00001000   /* port 1 configuration space */
-			  0x82000000 0 0x00004000 0x00004000 0 0x00001000   /* port 2 configuration space */
-			  0x81000000 0 0          0x02000000 0 0x00010000   /* downstream I/O */
-			  0x82000000 0 0x20000000 0x20000000 0 0x08000000   /* non-prefetchable memory */
-			  0xc2000000 0 0x28000000 0x28000000 0 0x18000000>; /* prefetchable memory */
+		ranges = <0x02000000 0 0x00000000 0x00000000 0 0x00001000>, /* port 0 configuration space */
+			 <0x02000000 0 0x00001000 0x00001000 0 0x00001000>, /* port 1 configuration space */
+			 <0x02000000 0 0x00004000 0x00004000 0 0x00001000>, /* port 2 configuration space */
+			 <0x01000000 0 0          0x02000000 0 0x00010000>, /* downstream I/O */
+			 <0x02000000 0 0x20000000 0x20000000 0 0x08000000>, /* non-prefetchable memory */
+			 <0x42000000 0 0x28000000 0x28000000 0 0x18000000>; /* prefetchable memory */
 
 		clocks = <&tegra_car TEGRA30_CLK_PCIE>,
 			 <&tegra_car TEGRA30_CLK_AFI>,
@@ -97,25 +97,27 @@
 		};
 	};
 
-	iram@40000000 {
+	sram@40000000 {
 		compatible = "mmio-sram";
 		reg = <0x40000000 0x40000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0x40000000 0x40000>;
 
-		vde_pool: vde@400 {
+		vde_pool: sram@400 {
 			reg = <0x400 0x3fc00>;
 			pool;
 		};
 	};
 
 	host1x@50000000 {
-		compatible = "nvidia,tegra30-host1x", "simple-bus";
+		compatible = "nvidia,tegra30-host1x";
 		reg = <0x50000000 0x00024000>;
 		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
 			     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */
+		interrupt-names = "syncpt", "host1x";
 		clocks = <&tegra_car TEGRA30_CLK_HOST1X>;
+		clock-names = "host1x";
 		resets = <&tegra_car 28>;
 		reset-names = "host1x";
 		iommus = <&mc TEGRA_SWGROUP_HC>;
@@ -183,8 +185,8 @@
 		gr3d@54180000 {
 			compatible = "nvidia,tegra30-gr3d";
 			reg = <0x54180000 0x00040000>;
-			clocks = <&tegra_car TEGRA30_CLK_GR3D
-				  &tegra_car TEGRA30_CLK_GR3D2>;
+			clocks = <&tegra_car TEGRA30_CLK_GR3D>,
+				 <&tegra_car TEGRA30_CLK_GR3D2>;
 			clock-names = "3d", "3d2";
 			resets = <&tegra_car 24>,
 				 <&tegra_car 98>;
@@ -195,7 +197,7 @@
 		};
 
 		dc@54200000 {
-			compatible = "nvidia,tegra30-dc", "nvidia,tegra20-dc";
+			compatible = "nvidia,tegra30-dc";
 			reg = <0x54200000 0x00040000>;
 			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&tegra_car TEGRA30_CLK_DISP1>,
@@ -255,11 +257,24 @@
 		dsi@54300000 {
 			compatible = "nvidia,tegra30-dsi";
 			reg = <0x54300000 0x00040000>;
-			clocks = <&tegra_car TEGRA30_CLK_DSIA>;
+			clocks = <&tegra_car TEGRA30_CLK_DSIA>,
+				 <&tegra_car TEGRA30_CLK_PLL_D_OUT0>;
+			clock-names = "dsi", "parent";
 			resets = <&tegra_car 48>;
 			reset-names = "dsi";
 			status = "disabled";
 		};
+
+		dsi@54400000 {
+			compatible = "nvidia,tegra30-dsi";
+			reg = <0x54400000 0x00040000>;
+			clocks = <&tegra_car TEGRA30_CLK_DSIB>,
+				 <&tegra_car TEGRA30_CLK_PLL_D_OUT0>;
+			clock-names = "dsi", "parent";
+			resets = <&tegra_car 84>;
+			reset-names = "dsi";
+			status = "disabled";
+		};
 	};
 
 	timer@50040600 {
@@ -273,8 +288,8 @@
 
 	intc: interrupt-controller@50041000 {
 		compatible = "arm,cortex-a9-gic";
-		reg = <0x50041000 0x1000
-		       0x50040100 0x0100>;
+		reg = <0x50041000 0x1000>,
+		      <0x50040100 0x0100>;
 		interrupt-controller;
 		#interrupt-cells = <3>;
 		interrupt-parent = <&intc>;
@@ -404,15 +419,15 @@
 
 	vde@6001a000 {
 		compatible = "nvidia,tegra30-vde", "nvidia,tegra20-vde";
-		reg = <0x6001a000 0x1000   /* Syntax Engine */
-		       0x6001b000 0x1000   /* Video Bitstream Engine */
-		       0x6001c000  0x100   /* Macroblock Engine */
-		       0x6001c200  0x100   /* Post-processing Engine */
-		       0x6001c400  0x100   /* Motion Compensation Engine */
-		       0x6001c600  0x100   /* Transform Engine */
-		       0x6001c800  0x100   /* Pixel prediction block */
-		       0x6001ca00  0x100   /* Video DMA */
-		       0x6001d800  0x400>; /* Video frame controls */
+		reg = <0x6001a000 0x1000>, /* Syntax Engine */
+		      <0x6001b000 0x1000>, /* Video Bitstream Engine */
+		      <0x6001c000  0x100>, /* Macroblock Engine */
+		      <0x6001c200  0x100>, /* Post-processing Engine */
+		      <0x6001c400  0x100>, /* Motion Compensation Engine */
+		      <0x6001c600  0x100>, /* Transform Engine */
+		      <0x6001c800  0x100>, /* Pixel prediction block */
+		      <0x6001ca00  0x100>, /* Video DMA */
+		      <0x6001d800  0x400>; /* Video frame controls */
 		reg-names = "sxe", "bsev", "mbe", "ppe", "mce",
 			    "tfe", "ppb", "vdma", "frameid";
 		iram = <&vde_pool>; /* IRAM region */
@@ -428,14 +443,14 @@
 
 	apbmisc@70000800 {
 		compatible = "nvidia,tegra30-apbmisc", "nvidia,tegra20-apbmisc";
-		reg = <0x70000800 0x64   /* Chip revision */
-		       0x70000008 0x04>; /* Strapping options */
+		reg = <0x70000800 0x64>, /* Chip revision */
+		      <0x70000008 0x04>; /* Strapping options */
 	};
 
 	pinmux: pinmux@70000868 {
 		compatible = "nvidia,tegra30-pinmux";
-		reg = <0x70000868 0xd4    /* Pad control registers */
-		       0x70003000 0x3e4>; /* Mux registers */
+		reg = <0x70000868 0x0d4>, /* Pad control registers */
+		      <0x70003000 0x3e4>; /* Mux registers */
 	};
 
 	/*
@@ -770,8 +785,8 @@
 
 	ahub@70080000 {
 		compatible = "nvidia,tegra30-ahub";
-		reg = <0x70080000 0x200
-		       0x70080200 0x100>;
+		reg = <0x70080000 0x200>,
+		      <0x70080200 0x100>;
 		interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA30_CLK_D_AUDIO>,
 			 <&tegra_car TEGRA30_CLK_APBIF>;
@@ -851,41 +866,45 @@
 		};
 	};
 
-	sdhci@78000000 {
-		compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
+	mmc@78000000 {
+		compatible = "nvidia,tegra30-sdhci";
 		reg = <0x78000000 0x200>;
 		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA30_CLK_SDMMC1>;
+		clock-names = "sdhci";
 		resets = <&tegra_car 14>;
 		reset-names = "sdhci";
 		status = "disabled";
 	};
 
-	sdhci@78000200 {
-		compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
+	mmc@78000200 {
+		compatible = "nvidia,tegra30-sdhci";
 		reg = <0x78000200 0x200>;
 		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA30_CLK_SDMMC2>;
+		clock-names = "sdhci";
 		resets = <&tegra_car 9>;
 		reset-names = "sdhci";
 		status = "disabled";
 	};
 
-	sdhci@78000400 {
-		compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
+	mmc@78000400 {
+		compatible = "nvidia,tegra30-sdhci";
 		reg = <0x78000400 0x200>;
 		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA30_CLK_SDMMC3>;
+		clock-names = "sdhci";
 		resets = <&tegra_car 69>;
 		reset-names = "sdhci";
 		status = "disabled";
 	};
 
-	sdhci@78000600 {
-		compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
+	mmc@78000600 {
+		compatible = "nvidia,tegra30-sdhci";
 		reg = <0x78000600 0x200>;
 		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA30_CLK_SDMMC4>;
+		clock-names = "sdhci";
 		resets = <&tegra_car 15>;
 		reset-names = "sdhci";
 		status = "disabled";
@@ -906,7 +925,8 @@
 
 	phy1: usb-phy@7d000000 {
 		compatible = "nvidia,tegra30-usb-phy";
-		reg = <0x7d000000 0x4000 0x7d000000 0x4000>;
+		reg = <0x7d000000 0x4000>,
+		      <0x7d000000 0x4000>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA30_CLK_USBD>,
 			 <&tegra_car TEGRA30_CLK_PLL_U>,
@@ -914,6 +934,7 @@
 		clock-names = "reg", "pll_u", "utmi-pads";
 		resets = <&tegra_car 22>, <&tegra_car 22>;
 		reset-names = "usb", "utmi-pads";
+		#phy-cells = <0>;
 		nvidia,hssync-start-delay = <9>;
 		nvidia,idle-wait-delay = <17>;
 		nvidia,elastic-limit = <16>;
@@ -943,7 +964,8 @@
 
 	phy2: usb-phy@7d004000 {
 		compatible = "nvidia,tegra30-usb-phy";
-		reg = <0x7d004000 0x4000 0x7d000000 0x4000>;
+		reg = <0x7d004000 0x4000>,
+		      <0x7d000000 0x4000>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA30_CLK_USB2>,
 			 <&tegra_car TEGRA30_CLK_PLL_U>,
@@ -951,6 +973,7 @@
 		clock-names = "reg", "pll_u", "utmi-pads";
 		resets = <&tegra_car 58>, <&tegra_car 22>;
 		reset-names = "usb", "utmi-pads";
+		#phy-cells = <0>;
 		nvidia,hssync-start-delay = <9>;
 		nvidia,idle-wait-delay = <17>;
 		nvidia,elastic-limit = <16>;
@@ -979,7 +1002,8 @@
 
 	phy3: usb-phy@7d008000 {
 		compatible = "nvidia,tegra30-usb-phy";
-		reg = <0x7d008000 0x4000 0x7d000000 0x4000>;
+		reg = <0x7d008000 0x4000>,
+		      <0x7d000000 0x4000>;
 		phy_type = "utmi";
 		clocks = <&tegra_car TEGRA30_CLK_USB3>,
 			 <&tegra_car TEGRA30_CLK_PLL_U>,
@@ -987,6 +1011,7 @@
 		clock-names = "reg", "pll_u", "utmi-pads";
 		resets = <&tegra_car 59>, <&tegra_car 22>;
 		reset-names = "usb", "utmi-pads";
+		#phy-cells = <0>;
 		nvidia,hssync-start-delay = <0>;
 		nvidia,idle-wait-delay = <17>;
 		nvidia,elastic-limit = <16>;
diff --git a/arch/arm/boot/dts/twl6030_omap4.dtsi b/arch/arm/boot/dts/twl6030_omap4.dtsi
index fc498d0bde8b..5730e46b0067 100644
--- a/arch/arm/boot/dts/twl6030_omap4.dtsi
+++ b/arch/arm/boot/dts/twl6030_omap4.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 &twl {
diff --git a/arch/arm/boot/dts/uniphier-ld4-ref.dts b/arch/arm/boot/dts/uniphier-ld4-ref.dts
index f2d060f403cc..c46c2e8a10a7 100644
--- a/arch/arm/boot/dts/uniphier-ld4-ref.dts
+++ b/arch/arm/boot/dts/uniphier-ld4-ref.dts
@@ -20,7 +20,7 @@
 
 	aliases {
 		serial0 = &serial0;
-		serial1 = &serial1;
+		serial1 = &serialsc;
 		serial2 = &serial2;
 		serial3 = &serial3;
 		i2c0 = &i2c0;
@@ -39,6 +39,10 @@
 	interrupts = <1 8>;
 };
 
+&serialsc {
+	interrupts = <1 8>;
+};
+
 &serial0 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/uniphier-ld6b-ref.dts b/arch/arm/boot/dts/uniphier-ld6b-ref.dts
index 079cadc11e6c..5bc7fe11b517 100644
--- a/arch/arm/boot/dts/uniphier-ld6b-ref.dts
+++ b/arch/arm/boot/dts/uniphier-ld6b-ref.dts
@@ -22,6 +22,7 @@
 		serial0 = &serial0;
 		serial1 = &serial1;
 		serial2 = &serial2;
+		serial3 = &serialsc;
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
@@ -42,6 +43,10 @@
 	interrupts = <4 8>;
 };
 
+&serialsc {
+	interrupts = <4 8>;
+};
+
 &serial0 {
 	status = "okay";
 };
@@ -76,7 +81,7 @@
 };
 
 &mdio {
-	ethphy: ethphy@0 {
+	ethphy: ethernet-phy@0 {
 		reg = <0>;
 	};
 };
diff --git a/arch/arm/boot/dts/uniphier-pinctrl.dtsi b/arch/arm/boot/dts/uniphier-pinctrl.dtsi
index bfdfb764b25b..c0fd029b37e5 100644
--- a/arch/arm/boot/dts/uniphier-pinctrl.dtsi
+++ b/arch/arm/boot/dts/uniphier-pinctrl.dtsi
@@ -126,6 +126,11 @@
 		function = "nand";
 	};
 
+	pinctrl_pcie: pcie {
+		groups = "pcie";
+		function = "pcie";
+	};
+
 	pinctrl_sd: sd {
 		groups = "sd";
 		function = "sd";
diff --git a/arch/arm/boot/dts/uniphier-pro4-ace.dts b/arch/arm/boot/dts/uniphier-pro4-ace.dts
index 64246fad325c..27ff2b7b9d0e 100644
--- a/arch/arm/boot/dts/uniphier-pro4-ace.dts
+++ b/arch/arm/boot/dts/uniphier-pro4-ace.dts
@@ -87,7 +87,7 @@
 };
 
 &mdio {
-	ethphy: ethphy@1 {
+	ethphy: ethernet-phy@1 {
 		reg = <1>;
 	};
 };
diff --git a/arch/arm/boot/dts/uniphier-pro4-ref.dts b/arch/arm/boot/dts/uniphier-pro4-ref.dts
index 181442c48532..3b9b61314d01 100644
--- a/arch/arm/boot/dts/uniphier-pro4-ref.dts
+++ b/arch/arm/boot/dts/uniphier-pro4-ref.dts
@@ -22,7 +22,7 @@
 		serial0 = &serial0;
 		serial1 = &serial1;
 		serial2 = &serial2;
-		serial3 = &serial3;
+		serial3 = &serialsc;
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
@@ -42,6 +42,10 @@
 	interrupts = <2 8>;
 };
 
+&serialsc {
+	interrupts = <2 8>;
+};
+
 &serial0 {
 	status = "okay";
 };
@@ -84,7 +88,7 @@
 };
 
 &mdio {
-	ethphy: ethphy@0 {
+	ethphy: ethernet-phy@0 {
 		reg = <0>;
 	};
 };
diff --git a/arch/arm/boot/dts/uniphier-pro4-sanji.dts b/arch/arm/boot/dts/uniphier-pro4-sanji.dts
index 5396556dee58..7b6faf2e795e 100644
--- a/arch/arm/boot/dts/uniphier-pro4-sanji.dts
+++ b/arch/arm/boot/dts/uniphier-pro4-sanji.dts
@@ -82,7 +82,7 @@
 };
 
 &mdio {
-	ethphy: ethphy@1 {
+	ethphy: ethernet-phy@1 {
 		reg = <1>;
 	};
 };
diff --git a/arch/arm/boot/dts/uniphier-pro5.dtsi b/arch/arm/boot/dts/uniphier-pro5.dtsi
index feadb4a378eb..3525125832dd 100644
--- a/arch/arm/boot/dts/uniphier-pro5.dtsi
+++ b/arch/arm/boot/dts/uniphier-pro5.dtsi
@@ -613,6 +613,36 @@
 			};
 		};
 
+		pcie_ep: pcie-ep@66000000 {
+			compatible = "socionext,uniphier-pro5-pcie-ep",
+				     "snps,dw-pcie-ep";
+			status = "disabled";
+			reg-names = "dbi", "dbi2", "link", "addr_space";
+			reg = <0x66000000 0x1000>, <0x66001000 0x1000>,
+			      <0x66010000 0x10000>, <0x67000000 0x400000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_pcie>;
+			clock-names = "gio", "link";
+			clocks = <&sys_clk 12>, <&sys_clk 24>;
+			reset-names = "gio", "link";
+			resets = <&sys_rst 12>, <&sys_rst 24>;
+			num-ib-windows = <16>;
+			num-ob-windows = <16>;
+			num-lanes = <4>;
+			phy-names = "pcie-phy";
+			phys = <&pcie_phy>;
+		};
+
+		pcie_phy: phy@66038000 {
+			compatible = "socionext,uniphier-pro5-pcie-phy";
+			reg = <0x66038000 0x4000>;
+			#phy-cells = <0>;
+			clock-names = "gio", "link";
+			clocks = <&sys_clk 12>, <&sys_clk 24>;
+			reset-names = "gio", "link";
+			resets = <&sys_rst 12>, <&sys_rst 24>;
+		};
+
 		nand: nand-controller@68000000 {
 			compatible = "socionext,uniphier-denali-nand-v5b";
 			status = "disabled";
diff --git a/arch/arm/boot/dts/uniphier-pxs2-gentil.dts b/arch/arm/boot/dts/uniphier-pxs2-gentil.dts
index 8e9ac579aa9a..759384b60663 100644
--- a/arch/arm/boot/dts/uniphier-pxs2-gentil.dts
+++ b/arch/arm/boot/dts/uniphier-pxs2-gentil.dts
@@ -87,7 +87,7 @@
 };
 
 &mdio {
-	ethphy: ethphy@1 {
+	ethphy: ethernet-phy@1 {
 		reg = <1>;
 	};
 };
diff --git a/arch/arm/boot/dts/uniphier-pxs2-vodka.dts b/arch/arm/boot/dts/uniphier-pxs2-vodka.dts
index 8eacc7bdecb7..7e08a459f7d8 100644
--- a/arch/arm/boot/dts/uniphier-pxs2-vodka.dts
+++ b/arch/arm/boot/dts/uniphier-pxs2-vodka.dts
@@ -88,7 +88,7 @@
 };
 
 &mdio {
-	ethphy: ethphy@1 {
+	ethphy: ethernet-phy@1 {
 		reg = <1>;
 	};
 };
diff --git a/arch/arm/boot/dts/uniphier-sld8-ref.dts b/arch/arm/boot/dts/uniphier-sld8-ref.dts
index cf9ea0b15065..6db949ec7411 100644
--- a/arch/arm/boot/dts/uniphier-sld8-ref.dts
+++ b/arch/arm/boot/dts/uniphier-sld8-ref.dts
@@ -20,7 +20,7 @@
 
 	aliases {
 		serial0 = &serial0;
-		serial1 = &serial1;
+		serial1 = &serialsc;
 		serial2 = &serial2;
 		serial3 = &serial3;
 		i2c0 = &i2c0;
@@ -39,6 +39,10 @@
 	interrupts = <0 8>;
 };
 
+&serialsc {
+	interrupts = <0 8>;
+};
+
 &serial0 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/uniphier-support-card.dtsi b/arch/arm/boot/dts/uniphier-support-card.dtsi
index bf441c2eff79..444802fee9fb 100644
--- a/arch/arm/boot/dts/uniphier-support-card.dtsi
+++ b/arch/arm/boot/dts/uniphier-support-card.dtsi
@@ -8,26 +8,19 @@
 &system_bus {
 	status = "okay";
 	ranges = <1 0x00000000 0x42000000 0x02000000>;
+	interrupt-parent = <&gpio>;
 
-	support_card: support-card@1,1f00000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x00000000 1 0x01f00000 0x00100000>;
-		interrupt-parent = <&gpio>;
-
-		ethsc: ethernet@0 {
-			compatible = "smsc,lan9118", "smsc,lan9115";
-			reg = <0x00000000 0x1000>;
-			phy-mode = "mii";
-			reg-io-width = <4>;
-		};
+	ethsc: ethernet@1,1f00000 {
+		compatible = "smsc,lan9118", "smsc,lan9115";
+		reg = <1 0x01f00000 0x1000>;
+		phy-mode = "mii";
+		reg-io-width = <4>;
+	};
 
-		serialsc: uart@b0000 {
-			compatible = "ns16550a";
-			reg = <0x000b0000 0x20>;
-			clock-frequency = <12288000>;
-			reg-shift = <1>;
-		};
+	serialsc: serial@1,1fb0000 {
+		compatible = "ns16550a";
+		reg = <1 0x01fb0000 0x20>;
+		clock-frequency = <12288000>;
+		reg-shift = <1>;
 	};
 };
diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
index e6308fb76183..a88ee5294d35 100644
--- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
@@ -100,79 +100,6 @@
 		};
 	};
 
-	mcc {
-		compatible = "arm,vexpress,config-bus";
-		arm,vexpress,config-bridge = <&v2m_sysreg>;
-
-		oscclk0 {
-			/* MCC static memory clock */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 0>;
-			freq-range = <25000000 60000000>;
-			#clock-cells = <0>;
-			clock-output-names = "v2m:oscclk0";
-		};
-
-		v2m_oscclk1: oscclk1 {
-			/* CLCD clock */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 1>;
-			freq-range = <23750000 65000000>;
-			#clock-cells = <0>;
-			clock-output-names = "v2m:oscclk1";
-		};
-
-		v2m_oscclk2: oscclk2 {
-			/* IO FPGA peripheral clock */
-			compatible = "arm,vexpress-osc";
-			arm,vexpress-sysreg,func = <1 2>;
-			freq-range = <24000000 24000000>;
-			#clock-cells = <0>;
-			clock-output-names = "v2m:oscclk2";
-		};
-
-		volt-vio {
-			/* Logic level voltage */
-			compatible = "arm,vexpress-volt";
-			arm,vexpress-sysreg,func = <2 0>;
-			regulator-name = "VIO";
-			regulator-always-on;
-			label = "VIO";
-		};
-
-		temp-mcc {
-			/* MCC internal operating temperature */
-			compatible = "arm,vexpress-temp";
-			arm,vexpress-sysreg,func = <4 0>;
-			label = "MCC";
-		};
-
-		reset {
-			compatible = "arm,vexpress-reset";
-			arm,vexpress-sysreg,func = <5 0>;
-		};
-
-		muxfpga {
-			compatible = "arm,vexpress-muxfpga";
-			arm,vexpress-sysreg,func = <7 0>;
-		};
-
-		shutdown {
-			compatible = "arm,vexpress-shutdown";
-			arm,vexpress-sysreg,func = <8 0>;
-		};
-
-		reboot {
-			compatible = "arm,vexpress-reboot";
-			arm,vexpress-sysreg,func = <9 0>;
-		};
-
-		dvimode {
-			compatible = "arm,vexpress-dvimode";
-			arm,vexpress-sysreg,func = <11 0>;
-		};
-	};
-
 	bus@8000000 {
 		motherboard-bus {
 			model = "V2M-P1";
@@ -435,6 +362,79 @@
 						};
 					};
 				};
+
+				mcc {
+					compatible = "arm,vexpress,config-bus";
+					arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+					oscclk0 {
+						/* MCC static memory clock */
+						compatible = "arm,vexpress-osc";
+						arm,vexpress-sysreg,func = <1 0>;
+						freq-range = <25000000 60000000>;
+						#clock-cells = <0>;
+						clock-output-names = "v2m:oscclk0";
+					};
+
+					v2m_oscclk1: oscclk1 {
+						/* CLCD clock */
+						compatible = "arm,vexpress-osc";
+						arm,vexpress-sysreg,func = <1 1>;
+						freq-range = <23750000 65000000>;
+						#clock-cells = <0>;
+						clock-output-names = "v2m:oscclk1";
+					};
+
+					v2m_oscclk2: oscclk2 {
+						/* IO FPGA peripheral clock */
+						compatible = "arm,vexpress-osc";
+						arm,vexpress-sysreg,func = <1 2>;
+						freq-range = <24000000 24000000>;
+						#clock-cells = <0>;
+						clock-output-names = "v2m:oscclk2";
+					};
+
+					volt-vio {
+						/* Logic level voltage */
+						compatible = "arm,vexpress-volt";
+						arm,vexpress-sysreg,func = <2 0>;
+						regulator-name = "VIO";
+						regulator-always-on;
+						label = "VIO";
+					};
+
+					temp-mcc {
+						/* MCC internal operating temperature */
+						compatible = "arm,vexpress-temp";
+						arm,vexpress-sysreg,func = <4 0>;
+						label = "MCC";
+					};
+
+					reset {
+						compatible = "arm,vexpress-reset";
+						arm,vexpress-sysreg,func = <5 0>;
+					};
+
+					muxfpga {
+						compatible = "arm,vexpress-muxfpga";
+						arm,vexpress-sysreg,func = <7 0>;
+					};
+
+					shutdown {
+						compatible = "arm,vexpress-shutdown";
+						arm,vexpress-sysreg,func = <8 0>;
+					};
+
+					reboot {
+						compatible = "arm,vexpress-reboot";
+						arm,vexpress-sysreg,func = <9 0>;
+					};
+
+					dvimode {
+						compatible = "arm,vexpress-dvimode";
+						arm,vexpress-sysreg,func = <11 0>;
+					};
+				};
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/vf610-zii-cfu1.dts b/arch/arm/boot/dts/vf610-zii-cfu1.dts
index ce1920c052fc..64e0e9509226 100644
--- a/arch/arm/boot/dts/vf610-zii-cfu1.dts
+++ b/arch/arm/boot/dts/vf610-zii-cfu1.dts
@@ -158,6 +158,8 @@
 	mdio1: mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clock-frequency = <12500000>;
+		suppress-preamble;
 		status = "okay";
 
 		switch0: switch0@0 {
diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
index 778e02c000d1..de79dcfd32e6 100644
--- a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
+++ b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
@@ -164,7 +164,7 @@
 					port@9 {
 						reg = <9>;
 						label = "sff2";
-						phy-mode = "sgmii";
+						phy-mode = "1000base-x";
 						managed = "in-band-status";
 						sfp = <&sff2>;
 					};
diff --git a/arch/arm/boot/dts/vf610-zii-dev.dtsi b/arch/arm/boot/dts/vf610-zii-dev.dtsi
index 95d0060fb56c..f8299f33a692 100644
--- a/arch/arm/boot/dts/vf610-zii-dev.dtsi
+++ b/arch/arm/boot/dts/vf610-zii-dev.dtsi
@@ -137,6 +137,8 @@
 	mdio1: mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clock-frequency = <12500000>;
+		suppress-preamble;
 		status = "okay";
 	};
 };
diff --git a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
index b642520199ba..040a1f8b6130 100644
--- a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
+++ b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
@@ -186,7 +186,7 @@
 					port@2 {
 						reg = <2>;
 						label = "eth_fc_1000_2";
-						phy-mode = "sgmii";
+						phy-mode = "1000base-x";
 						managed = "in-band-status";
 						sfp = <&sff1>;
 					};
@@ -194,7 +194,7 @@
 					port@3 {
 						reg = <3>;
 						label = "eth_fc_1000_3";
-						phy-mode = "sgmii";
+						phy-mode = "1000base-x";
 						managed = "in-band-status";
 						sfp = <&sff2>;
 					};
@@ -202,7 +202,7 @@
 					port@4 {
 						reg = <4>;
 						label = "eth_fc_1000_4";
-						phy-mode = "sgmii";
+						phy-mode = "1000base-x";
 						managed = "in-band-status";
 						sfp = <&sff3>;
 					};
@@ -210,7 +210,7 @@
 					port@5 {
 						reg = <5>;
 						label = "eth_fc_1000_5";
-						phy-mode = "sgmii";
+						phy-mode = "1000base-x";
 						managed = "in-band-status";
 						sfp = <&sff4>;
 					};
@@ -218,7 +218,7 @@
 					port@6 {
 						reg = <6>;
 						label = "eth_fc_1000_6";
-						phy-mode = "sgmii";
+						phy-mode = "1000base-x";
 						managed = "in-band-status";
 						sfp = <&sff5>;
 					};
@@ -226,7 +226,7 @@
 					port@7 {
 						reg = <7>;
 						label = "eth_fc_1000_7";
-						phy-mode = "sgmii";
+						phy-mode = "1000base-x";
 						managed = "in-band-status";
 						sfp = <&sff6>;
 					};
@@ -234,7 +234,7 @@
 					port@9 {
 						reg = <9>;
 						label = "eth_fc_1000_1";
-						phy-mode = "sgmii";
+						phy-mode = "1000base-x";
 						managed = "in-band-status";
 						sfp = <&sff0>;
 					};
@@ -269,7 +269,7 @@
 					port@2 {
 						reg = <2>;
 						label = "eth_fc_1000_8";
-						phy-mode = "sgmii";
+						phy-mode = "1000base-x";
 						managed = "in-band-status";
 						sfp = <&sff7>;
 					};
@@ -277,7 +277,7 @@
 					port@3 {
 						reg = <3>;
 						label = "eth_fc_1000_9";
-						phy-mode = "sgmii";
+						phy-mode = "1000base-x";
 						managed = "in-band-status";
 						sfp = <&sff8>;
 					};
@@ -285,7 +285,7 @@
 					port@4 {
 						reg = <4>;
 						label = "eth_fc_1000_10";
-						phy-mode = "sgmii";
+						phy-mode = "1000base-x";
 						managed = "in-band-status";
 						sfp = <&sff9>;
 					};
diff --git a/arch/arm/boot/dts/vf610-zii-spb4.dts b/arch/arm/boot/dts/vf610-zii-spb4.dts
index 55b4201e27f6..9e5187ba3fa6 100644
--- a/arch/arm/boot/dts/vf610-zii-spb4.dts
+++ b/arch/arm/boot/dts/vf610-zii-spb4.dts
@@ -119,6 +119,8 @@
 	mdio1: mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clock-frequency = <12500000>;
+		suppress-preamble;
 		status = "okay";
 
 		switch0: switch0@0 {
@@ -207,6 +209,18 @@
 	};
 };
 
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	watchdog@38 {
+		compatible = "zii,rave-wdt";
+		reg = <0x38>;
+	};
+};
+
 &snvsrtc {
 	status = "disabled";
 };
@@ -324,6 +338,13 @@
 		>;
 	};
 
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			VF610_PAD_PTB16__I2C1_SCL		0x37ff
+			VF610_PAD_PTB17__I2C1_SDA		0x37ff
+		>;
+	};
+
 	pinctrl_leds_debug: pinctrl-leds-debug {
 		fsl,pins = <
 			VF610_PAD_PTD3__GPIO_82			0x31c2
diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts b/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts
index a6c22a79779e..569614b08f04 100644
--- a/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts
+++ b/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts
@@ -81,6 +81,8 @@
 	non-removable;
 	no-1-8-v;
 	keep-power-in-suspend;
+	no-sdio;
+	no-sd;
 	status = "okay";
 };
 
@@ -88,6 +90,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
 	bus-width = <4>;
+	no-sdio;
 	status = "okay";
 };
 
@@ -105,6 +108,8 @@
 	mdio1: mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clock-frequency = <12500000>;
+		suppress-preamble;
 		status = "okay";
 
 		switch0: switch0@0 {
diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts
index 3d05c894bdc0..b6b0f302b7b4 100644
--- a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts
+++ b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts
@@ -133,6 +133,8 @@
 	mdio1: mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clock-frequency = <12500000>;
+		suppress-preamble;
 		status = "okay";
 
 		switch0: switch0@0 {
@@ -226,6 +228,18 @@
 	};
 };
 
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	watchdog@38 {
+		compatible = "zii,rave-wdt";
+		reg = <0x38>;
+	};
+};
+
 &snvsrtc {
 	status = "disabled";
 };
diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi
index 7fd39817f8ab..956182d08e74 100644
--- a/arch/arm/boot/dts/vf610.dtsi
+++ b/arch/arm/boot/dts/vf610.dtsi
@@ -10,7 +10,7 @@
 };
 
 &aips0 {
-	L2: l2-cache@40006000 {
+	L2: cache-controller@40006000 {
 		compatible = "arm,pl310-cache";
 		reg = <0x40006000 0x1000>;
 		cache-unified;
diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi
index 2d547e7b21ad..0fe03aa0367f 100644
--- a/arch/arm/boot/dts/vfxxx.dtsi
+++ b/arch/arm/boot/dts/vfxxx.dtsi
@@ -729,6 +729,28 @@
 				dma-names = "rx","tx";
 				status = "disabled";
 			};
+
+			crypto: crypto@400f0000 {
+				compatible = "fsl,sec-v4.0";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x400f0000 0x9000>;
+				ranges = <0 0x400f0000 0x9000>;
+				clocks = <&clks VF610_CLK_CAAM>;
+				clock-names = "ipg";
+
+				sec_jr0: jr0@1000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x1000 0x1000>;
+					interrupts = <102 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				sec_jr1: jr1@2000 {
+					compatible = "fsl,sec-v4.0-job-ring";
+					reg = <0x2000 0x1000>;
+					interrupts = <102 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
 		};
 	};
 };
diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig
index 374fbff8eaa6..6e8b5ff0859c 100644
--- a/arch/arm/configs/exynos_defconfig
+++ b/arch/arm/configs/exynos_defconfig
@@ -166,7 +166,9 @@ CONFIG_DEVFREQ_THERMAL=y
 CONFIG_THERMAL_EMULATION=y
 CONFIG_WATCHDOG=y
 CONFIG_S3C2410_WATCHDOG=y
-CONFIG_MFD_CROS_EC=y
+CONFIG_MFD_CROS_EC_DEV=y
+CONFIG_CHROME_PLATFORMS=y
+CONFIG_CROS_EC=y
 CONFIG_MFD_MAX14577=y
 CONFIG_MFD_MAX77686=y
 CONFIG_MFD_MAX77693=y
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 87e6400c436b..cb335478ac37 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -217,6 +217,7 @@ CONFIG_SPI=y
 CONFIG_SPI_GPIO=y
 CONFIG_SPI_IMX=y
 CONFIG_SPI_FSL_DSPI=y
+CONFIG_PINCTRL_IMX8MM=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_SIOX=m
 CONFIG_GPIO_MAX732X=y
@@ -406,6 +407,8 @@ CONFIG_STAGING=y
 CONFIG_STAGING_MEDIA=y
 CONFIG_VIDEO_IMX_MEDIA=y
 CONFIG_COMMON_CLK_PWM=y
+CONFIG_CLK_IMX8MM=y
+CONFIG_SOC_IMX8M=y
 CONFIG_IIO=y
 CONFIG_MMA8452=y
 CONFIG_IMX7D_ADC=y
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 95543914d3c7..e9e76e32f10f 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -314,6 +314,7 @@ CONFIG_INPUT_MAX77693_HAPTIC=m
 CONFIG_INPUT_MAX8997_HAPTIC=m
 CONFIG_INPUT_CPCAP_PWRBUTTON=m
 CONFIG_INPUT_AXP20X_PEK=m
+CONFIG_INPUT_DA9063_ONKEY=m
 CONFIG_INPUT_ADXL34X=m
 CONFIG_INPUT_STPMIC1_ONKEY=y
 CONFIG_SERIO_AMBAKMI=y
@@ -520,6 +521,7 @@ CONFIG_TEGRA_WATCHDOG=m
 CONFIG_MESON_WATCHDOG=y
 CONFIG_DIGICOLOR_WATCHDOG=y
 CONFIG_RENESAS_WDT=m
+CONFIG_RENESAS_RZAWDT=m
 CONFIG_STPMIC1_WATCHDOG=y
 CONFIG_BCM47XX_WDT=y
 CONFIG_BCM2835_WDT=y
@@ -618,6 +620,7 @@ CONFIG_V4L_PLATFORM_DRIVERS=y
 CONFIG_VIDEO_MMP_CAMERA=m
 CONFIG_VIDEO_ASPEED=m
 CONFIG_VIDEO_STM32_DCMI=m
+CONFIG_VIDEO_RENESAS_CEU=m
 CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS=m
 CONFIG_VIDEO_S5P_FIMC=m
 CONFIG_VIDEO_S5P_MIPI_CSIS=m
@@ -640,6 +643,8 @@ CONFIG_VIDEO_VIVID=m
 CONFIG_CEC_PLATFORM_DRIVERS=y
 CONFIG_CEC_SAMSUNG_S5P=m
 CONFIG_VIDEO_ADV7180=m
+CONFIG_VIDEO_ADV7604=m
+CONFIG_VIDEO_ADV7604_CEC=y
 CONFIG_VIDEO_ML86V7667=m
 CONFIG_IMX_IPUV3_CORE=m
 CONFIG_DRM=y
@@ -901,6 +906,7 @@ CONFIG_RTC_DRV_EFI=m
 CONFIG_RTC_DRV_DIGICOLOR=m
 CONFIG_RTC_DRV_S3C=m
 CONFIG_RTC_DRV_SA1100=m
+CONFIG_RTC_DRV_SH=m
 CONFIG_RTC_DRV_PL031=y
 CONFIG_RTC_DRV_AT91RM9200=m
 CONFIG_RTC_DRV_AT91SAM9=m
@@ -945,7 +951,7 @@ CONFIG_SERIO_NVEC_PS2=y
 CONFIG_NVEC_POWER=y
 CONFIG_NVEC_PAZ00=y
 CONFIG_STAGING_BOARD=y
-CONFIG_MFD_CROS_EC=m
+CONFIG_MFD_CROS_EC_DEV=m
 CONFIG_CROS_EC_I2C=m
 CONFIG_CROS_EC_SPI=m
 CONFIG_COMMON_CLK_MAX77686=y
@@ -1126,3 +1132,6 @@ CONFIG_CMA_SIZE_MBYTES=64
 CONFIG_PRINTK_TIME=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
+CONFIG_CHROME_PLATFORMS=y
+CONFIG_CROS_EC=m
+CONFIG_CROS_EC_CHARDEV=m
diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig
index e6559e3350e6..1dc7e9d7a294 100644
--- a/arch/arm/configs/pxa_defconfig
+++ b/arch/arm/configs/pxa_defconfig
@@ -391,7 +391,9 @@ CONFIG_SA1100_WATCHDOG=m
 CONFIG_MFD_AS3711=y
 CONFIG_MFD_BCM590XX=m
 CONFIG_MFD_AXP20X=y
-CONFIG_MFD_CROS_EC=m
+CONFIG_MFD_CROS_EC_DEV=m
+CONFIG_CHROME_PLATFORMS=y
+CONFIG_CROS_EC=m
 CONFIG_CROS_EC_I2C=m
 CONFIG_CROS_EC_SPI=m
 CONFIG_MFD_ASIC3=y
diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig
index 8e1f78c19920..7b7e333157fe 100644
--- a/arch/arm/configs/sama5_defconfig
+++ b/arch/arm/configs/sama5_defconfig
@@ -49,9 +49,14 @@ CONFIG_IP_PNP_RARP=y
 # CONFIG_INET6_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET6_XFRM_MODE_BEET is not set
 CONFIG_IPV6_SIT_6RD=y
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_VLAN_FILTERING=y
+CONFIG_NET_DSA=m
+CONFIG_VLAN_8021Q=m
 CONFIG_CAN=y
 CONFIG_CAN_AT91=y
 CONFIG_CAN_M_CAN=y
+CONFIG_CAN_M_CAN_PLATFORM=y
 CONFIG_CFG80211=y
 CONFIG_MAC80211=y
 CONFIG_MAC80211_LEDS=y
@@ -80,6 +85,8 @@ CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
+CONFIG_NET_DSA_MICROCHIP_KSZ9477=m
+CONFIG_NET_DSA_MICROCHIP_KSZ9477_SPI=m
 CONFIG_MACB=y
 # CONFIG_NET_VENDOR_BROADCOM is not set
 # CONFIG_NET_VENDOR_CIRRUS is not set
@@ -165,6 +172,7 @@ CONFIG_SND_SOC=y
 CONFIG_SND_ATMEL_SOC=y
 CONFIG_SND_ATMEL_SOC_WM8904=y
 # CONFIG_HID_GENERIC is not set
+CONFIG_SND_ATMEL_SOC_CLASSD=y
 CONFIG_SND_ATMEL_SOC_PDMIC=y
 CONFIG_SND_ATMEL_SOC_TSE850_PCM5142=m
 CONFIG_SND_ATMEL_SOC_I2S=y
diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig
index 9cf3143025e1..bbedc42bb2d9 100644
--- a/arch/arm/configs/shmobile_defconfig
+++ b/arch/arm/configs/shmobile_defconfig
@@ -13,8 +13,6 @@ CONFIG_SMP=y
 CONFIG_SCHED_MC=y
 CONFIG_NR_CPUS=8
 CONFIG_HIGHMEM=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_KEXEC=y
 CONFIG_CPU_FREQ=y
@@ -67,6 +65,7 @@ CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_EDT_FT5X06=y
 CONFIG_TOUCHSCREEN_ST1232=y
 CONFIG_INPUT_MISC=y
+CONFIG_INPUT_DA9063_ONKEY=y
 CONFIG_INPUT_ADXL34X=y
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_8250=y
@@ -90,6 +89,7 @@ CONFIG_PINCTRL_RZA1=y
 CONFIG_PINCTRL_RZA2=y
 CONFIG_GPIO_EM=y
 CONFIG_GPIO_RCAR=y
+CONFIG_GPIO_PCA953X=y
 CONFIG_GPIO_PCF857X=y
 CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_RMOBILE=y
@@ -101,6 +101,7 @@ CONFIG_RCAR_THERMAL=y
 CONFIG_WATCHDOG=y
 CONFIG_DA9063_WATCHDOG=y
 CONFIG_RENESAS_WDT=y
+CONFIG_RENESAS_RZAWDT=y
 CONFIG_MFD_AS3711=y
 CONFIG_MFD_DA9063=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
@@ -109,18 +110,19 @@ CONFIG_REGULATOR_DA9210=y
 CONFIG_REGULATOR_GPIO=y
 CONFIG_REGULATOR_MAX8973=y
 CONFIG_MEDIA_SUPPORT=y
+# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
 CONFIG_MEDIA_CAMERA_SUPPORT=y
-CONFIG_MEDIA_CONTROLLER=y
-CONFIG_VIDEO_V4L2_SUBDEV_API=y
+CONFIG_MEDIA_PLATFORM_SUPPORT=y
 CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_VIDEO_RENESAS_CEU=y
 CONFIG_VIDEO_RCAR_VIN=y
 CONFIG_V4L_MEM2MEM_DRIVERS=y
 CONFIG_VIDEO_RENESAS_FDP1=y
 CONFIG_VIDEO_RENESAS_JPU=y
 CONFIG_VIDEO_RENESAS_VSP1=y
-# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
 CONFIG_VIDEO_ADV7180=y
 CONFIG_VIDEO_ADV7604=y
+CONFIG_VIDEO_ADV7604_CEC=y
 CONFIG_VIDEO_ML86V7667=y
 CONFIG_DRM=y
 CONFIG_DRM_RCAR_DU=y
@@ -168,6 +170,7 @@ CONFIG_RTC_DRV_BQ32K=y
 CONFIG_RTC_DRV_S35390A=y
 CONFIG_RTC_DRV_RX8581=y
 CONFIG_RTC_DRV_DA9063=y
+CONFIG_RTC_DRV_SH=y
 CONFIG_DMADEVICES=y
 CONFIG_RCAR_DMAC=y
 CONFIG_RENESAS_USB_DMAC=y
diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig
index b105ce7120cc..244126172fd6 100644
--- a/arch/arm/configs/sunxi_defconfig
+++ b/arch/arm/configs/sunxi_defconfig
@@ -3,20 +3,19 @@ CONFIG_HIGH_RES_TIMERS=y
 CONFIG_CGROUPS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_PERF_EVENTS=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=8
-CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
-CONFIG_CMA=y
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPUFREQ_DT=y
 CONFIG_VFP=y
 CONFIG_NEON=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_CMA=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -24,9 +23,6 @@ CONFIG_INET=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_IPV6 is not set
 CONFIG_CAN=y
@@ -34,14 +30,12 @@ CONFIG_CAN_SUN4I=y
 # CONFIG_WIRELESS is not set
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_DMA_CMA=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_ATA=y
 CONFIG_AHCI_SUNXI=y
 CONFIG_NETDEVICES=y
 CONFIG_SUN4I_EMAC=y
 # CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
 # CONFIG_NET_VENDOR_CIRRUS is not set
 # CONFIG_NET_VENDOR_FARADAY is not set
@@ -65,6 +59,7 @@ CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_SUN4I=y
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_AXP20X_PEK=y
+CONFIG_SERIO_SUN4I_PS2=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=8
@@ -95,19 +90,37 @@ CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_AXP20X=y
 CONFIG_REGULATOR_GPIO=y
-CONFIG_MEDIA_SUPPORT=y
 CONFIG_RC_CORE=y
 CONFIG_RC_DEVICES=y
 CONFIG_IR_SUNXI=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_MEDIA_PLATFORM_SUPPORT=y
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_VIDEO_SUN4I_CSI=y
+CONFIG_VIDEO_SUN6I_CSI=y
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_SUN8I_DEINTERLACE=y
+CONFIG_VIDEO_SUN8I_ROTATE=y
 CONFIG_DRM=y
 CONFIG_DRM_SUN4I=y
+CONFIG_DRM_SUN4I_HDMI_CEC=y
+CONFIG_DRM_SUN8I_DW_HDMI=y
+CONFIG_DRM_PANEL_LVDS=y
+CONFIG_DRM_PANEL_SIMPLE=y
 CONFIG_DRM_SIMPLE_BRIDGE=y
+CONFIG_DRM_LIMA=y
 CONFIG_FB_SIMPLE=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_PWM=y
 CONFIG_SOUND=y
 CONFIG_SND=y
 CONFIG_SND_SOC=y
 CONFIG_SND_SUN4I_CODEC=y
+CONFIG_SND_SUN8I_CODEC=y
 CONFIG_SND_SUN8I_CODEC_ANALOG=y
+CONFIG_SND_SUN4I_I2S=y
+CONFIG_SND_SUN4I_SPDIF=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_HCD_PLATFORM=y
@@ -132,15 +145,18 @@ CONFIG_RTC_DRV_AC100=y
 CONFIG_RTC_DRV_SUNXI=y
 CONFIG_DMADEVICES=y
 CONFIG_DMA_SUN6I=y
+CONFIG_STAGING=y
+CONFIG_STAGING_MEDIA=y
+CONFIG_VIDEO_SUNXI=y
+CONFIG_VIDEO_SUNXI_CEDRUS=y
+CONFIG_MAILBOX=y
 # CONFIG_IOMMU_SUPPORT is not set
-CONFIG_EXTCON=y
 CONFIG_IIO=y
 CONFIG_AXP20X_ADC=y
 CONFIG_PWM=y
 CONFIG_PWM_SUN4I=y
 CONFIG_PHY_SUN4I_USB=y
 CONFIG_PHY_SUN9I_USB=y
-CONFIG_NVMEM=y
 CONFIG_NVMEM_SUNXI_SID=y
 CONFIG_EXT4_FS=y
 CONFIG_VFAT_FS=y
@@ -151,8 +167,10 @@ CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
+CONFIG_CRYPTO_DEV_SUN4I_SS=y
+CONFIG_CRYPTO_DEV_SUN4I_SS_PRNG=y
+CONFIG_CRYPTO_DEV_SUN8I_CE=y
+CONFIG_CRYPTO_DEV_SUN8I_SS=y
+CONFIG_DMA_CMA=y
 CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_FS=y
-CONFIG_CRYPTO_DEV_ALLWINNER=y
-CONFIG_CRYPTO_DEV_SUN8I_CE=y
-CONFIG_CRYPTO_DEV_SUN4I_SS=y
diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig
index aa94369bdd0f..fff5fae0db30 100644
--- a/arch/arm/configs/tegra_defconfig
+++ b/arch/arm/configs/tegra_defconfig
@@ -10,6 +10,8 @@ CONFIG_RT_GROUP_SCHED=y
 CONFIG_CGROUP_FREEZER=y
 CONFIG_CGROUP_CPUACCT=y
 CONFIG_CGROUP_DEBUG=y
+CONFIG_NAMESPACES=y
+CONFIG_USER_NS=y
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_ELF_CORE is not set
 CONFIG_EMBEDDED=y
@@ -18,11 +20,13 @@ CONFIG_SLAB=y
 CONFIG_ARCH_TEGRA=y
 CONFIG_SMP=y
 CONFIG_HIGHMEM=y
+CONFIG_SECCOMP=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_KEXEC=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_CPUFREQ_DT=y
 CONFIG_CPU_IDLE=y
 CONFIG_ARM_TEGRA_CPUIDLE=y
@@ -63,11 +67,17 @@ CONFIG_BT_RFCOMM=y
 CONFIG_BT_BNEP=y
 CONFIG_BT_HIDP=y
 CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIUART=y
+CONFIG_BT_HCIUART_BCM=y
 CONFIG_CFG80211=y
 CONFIG_MAC80211=y
 CONFIG_RFKILL=y
 CONFIG_RFKILL_INPUT=y
 CONFIG_RFKILL_GPIO=y
+CONFIG_NFC=y
+CONFIG_NFC_HCI=y
+CONFIG_NFC_SHDLC=y
+CONFIG_NFC_PN544_I2C=y
 CONFIG_PCI=y
 CONFIG_PCIEPORTBUS=y
 CONFIG_PCI_MSI=y
@@ -106,20 +116,24 @@ CONFIG_INPUT_JOYDEV=y
 CONFIG_INPUT_EVDEV=y
 CONFIG_KEYBOARD_GPIO=y
 CONFIG_KEYBOARD_TEGRA=y
+CONFIG_KEYBOARD_CAP11XX=y
 CONFIG_KEYBOARD_CROS_EC=y
 CONFIG_MOUSE_PS2_ELANTECH=y
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ATMEL_MXT=y
+CONFIG_TOUCHSCREEN_ELAN=y
 CONFIG_TOUCHSCREEN_WM97XX=y
 # CONFIG_TOUCHSCREEN_WM9705 is not set
 # CONFIG_TOUCHSCREEN_WM9713 is not set
 CONFIG_TOUCHSCREEN_STMPE=y
 CONFIG_INPUT_MISC=y
+CONFIG_INPUT_GPIO_VIBRA=y
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_SERIAL_TEGRA=y
+CONFIG_SERIAL_DEV_BUS=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_I2C_COMPAT is not set
 CONFIG_I2C_CHARDEV=y
@@ -131,10 +145,12 @@ CONFIG_SPI_TEGRA114=y
 CONFIG_SPI_TEGRA20_SFLASH=y
 CONFIG_SPI_TEGRA20_SLINK=y
 CONFIG_PINCTRL_AS3722=y
+CONFIG_PINCTRL_MAX77620=y
 CONFIG_PINCTRL_PALMAS=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_PCA953X=y
 CONFIG_GPIO_PCA953X_IRQ=y
+CONFIG_GPIO_MAX77620=y
 CONFIG_GPIO_PALMAS=y
 CONFIG_GPIO_TPS6586X=y
 CONFIG_GPIO_TPS65910=y
@@ -142,13 +158,21 @@ CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_AS3722=y
 CONFIG_POWER_RESET_GPIO=y
 CONFIG_BATTERY_SBS=y
+CONFIG_BATTERY_BQ27XXX=y
+CONFIG_CHARGER_GPIO=y
+CONFIG_CHARGER_SMB347=y
 CONFIG_CHARGER_TPS65090=y
 CONFIG_SENSORS_LM90=y
 CONFIG_SENSORS_LM95245=y
+CONFIG_THERMAL=y
+CONFIG_THERMAL_STATISTICS=y
+CONFIG_CPU_THERMAL=y
 CONFIG_WATCHDOG=y
+CONFIG_MAX77620_WATCHDOG=y
 CONFIG_TEGRA_WATCHDOG=y
 CONFIG_MFD_AS3722=y
-CONFIG_MFD_CROS_EC=y
+CONFIG_MFD_CROS_EC_DEV=y
+CONFIG_MFD_MAX77620=y
 CONFIG_MFD_MAX8907=y
 CONFIG_MFD_STMPE=y
 CONFIG_MFD_PALMAS=y
@@ -159,6 +183,7 @@ CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_AS3722=y
 CONFIG_REGULATOR_GPIO=y
+CONFIG_REGULATOR_MAX77620=y
 CONFIG_REGULATOR_MAX8907=y
 CONFIG_REGULATOR_PALMAS=y
 CONFIG_REGULATOR_TPS51632=y
@@ -174,7 +199,10 @@ CONFIG_USB_GSPCA=y
 CONFIG_DRM=y
 CONFIG_DRM_NOUVEAU=m
 CONFIG_DRM_TEGRA=y
+CONFIG_DRM_TEGRA_STAGING=y
+CONFIG_DRM_PANEL_LVDS=y
 CONFIG_DRM_PANEL_SIMPLE=y
+CONFIG_DRM_LVDS_CODEC=y
 # CONFIG_LCD_CLASS_DEVICE is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_GENERIC is not set
@@ -238,6 +266,7 @@ CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_AS3722=y
 CONFIG_RTC_DRV_DS1307=y
 CONFIG_RTC_DRV_MAX8907=y
+CONFIG_RTC_DRV_MAX77686=y
 CONFIG_RTC_DRV_PALMAS=y
 CONFIG_RTC_DRV_TPS6586X=y
 CONFIG_RTC_DRV_TPS65910=y
@@ -259,11 +288,18 @@ CONFIG_ARCH_TEGRA_2x_SOC=y
 CONFIG_ARCH_TEGRA_3x_SOC=y
 CONFIG_ARCH_TEGRA_114_SOC=y
 CONFIG_ARCH_TEGRA_124_SOC=y
+CONFIG_PM_DEVFREQ=y
+CONFIG_ARM_TEGRA_DEVFREQ=y
+CONFIG_ARM_TEGRA20_DEVFREQ=y
 CONFIG_MEMORY=y
 CONFIG_IIO=y
+CONFIG_KXCJK1013=y
 CONFIG_MPU3050_I2C=y
+CONFIG_INV_MPU6050_I2C=y
+CONFIG_AL3010=y
 CONFIG_SENSORS_ISL29018=y
 CONFIG_SENSORS_ISL29028=y
+CONFIG_AK8974=y
 CONFIG_AK8975=y
 CONFIG_PWM=y
 CONFIG_PWM_TEGRA=y
@@ -282,6 +318,13 @@ CONFIG_TMPFS_POSIX_ACL=y
 CONFIG_SQUASHFS=y
 CONFIG_SQUASHFS_LZO=y
 CONFIG_SQUASHFS_XZ=y
+CONFIG_PSTORE=y
+CONFIG_PSTORE_LZO_COMPRESS=y
+CONFIG_PSTORE_LZ4_COMPRESS=y
+CONFIG_PSTORE_LZ4HC_COMPRESS=y
+CONFIG_PSTORE_842_COMPRESS=y
+CONFIG_PSTORE_CONSOLE=y
+CONFIG_PSTORE_RAM=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
diff --git a/arch/arm/crypto/crc32-ce-core.S b/arch/arm/crypto/crc32-ce-core.S
index 5cbd4a6fedad..3f13a76b9066 100644
--- a/arch/arm/crypto/crc32-ce-core.S
+++ b/arch/arm/crypto/crc32-ce-core.S
@@ -39,7 +39,7 @@
  * CRC32 polynomial:0x04c11db7(BE)/0xEDB88320(LE)
  * PCLMULQDQ is a new instruction in Intel SSE4.2, the reference can be found
  * at:
- * http://www.intel.com/products/processor/manuals/
+ * https://www.intel.com/products/processor/manuals/
  * Intel(R) 64 and IA-32 Architectures Software Developer's Manual
  * Volume 2B: Instruction Set Reference, N-Z
  *
diff --git a/arch/arm/crypto/ghash-ce-glue.c b/arch/arm/crypto/ghash-ce-glue.c
index a00fd329255f..f13401f3e669 100644
--- a/arch/arm/crypto/ghash-ce-glue.c
+++ b/arch/arm/crypto/ghash-ce-glue.c
@@ -16,6 +16,7 @@
 #include <crypto/gf128mul.h>
 #include <linux/cpufeature.h>
 #include <linux/crypto.h>
+#include <linux/jump_label.h>
 #include <linux/module.h>
 
 MODULE_DESCRIPTION("GHASH hash function using ARMv8 Crypto Extensions");
@@ -27,12 +28,8 @@ MODULE_ALIAS_CRYPTO("ghash");
 #define GHASH_DIGEST_SIZE	16
 
 struct ghash_key {
-	u64	h[2];
-	u64	h2[2];
-	u64	h3[2];
-	u64	h4[2];
-
 	be128	k;
+	u64	h[][2];
 };
 
 struct ghash_desc_ctx {
@@ -46,16 +43,12 @@ struct ghash_async_ctx {
 };
 
 asmlinkage void pmull_ghash_update_p64(int blocks, u64 dg[], const char *src,
-				       struct ghash_key const *k,
-				       const char *head);
+				       u64 const h[][2], const char *head);
 
 asmlinkage void pmull_ghash_update_p8(int blocks, u64 dg[], const char *src,
-				      struct ghash_key const *k,
-				      const char *head);
+				      u64 const h[][2], const char *head);
 
-static void (*pmull_ghash_update)(int blocks, u64 dg[], const char *src,
-				  struct ghash_key const *k,
-				  const char *head);
+static __ro_after_init DEFINE_STATIC_KEY_FALSE(use_p64);
 
 static int ghash_init(struct shash_desc *desc)
 {
@@ -70,7 +63,10 @@ static void ghash_do_update(int blocks, u64 dg[], const char *src,
 {
 	if (likely(crypto_simd_usable())) {
 		kernel_neon_begin();
-		pmull_ghash_update(blocks, dg, src, key, head);
+		if (static_branch_likely(&use_p64))
+			pmull_ghash_update_p64(blocks, dg, src, key->h, head);
+		else
+			pmull_ghash_update_p8(blocks, dg, src, key->h, head);
 		kernel_neon_end();
 	} else {
 		be128 dst = { cpu_to_be64(dg[1]), cpu_to_be64(dg[0]) };
@@ -161,25 +157,26 @@ static int ghash_setkey(struct crypto_shash *tfm,
 			const u8 *inkey, unsigned int keylen)
 {
 	struct ghash_key *key = crypto_shash_ctx(tfm);
-	be128 h;
 
 	if (keylen != GHASH_BLOCK_SIZE)
 		return -EINVAL;
 
 	/* needed for the fallback */
 	memcpy(&key->k, inkey, GHASH_BLOCK_SIZE);
-	ghash_reflect(key->h, &key->k);
+	ghash_reflect(key->h[0], &key->k);
 
-	h = key->k;
-	gf128mul_lle(&h, &key->k);
-	ghash_reflect(key->h2, &h);
+	if (static_branch_likely(&use_p64)) {
+		be128 h = key->k;
 
-	gf128mul_lle(&h, &key->k);
-	ghash_reflect(key->h3, &h);
+		gf128mul_lle(&h, &key->k);
+		ghash_reflect(key->h[1], &h);
 
-	gf128mul_lle(&h, &key->k);
-	ghash_reflect(key->h4, &h);
+		gf128mul_lle(&h, &key->k);
+		ghash_reflect(key->h[2], &h);
 
+		gf128mul_lle(&h, &key->k);
+		ghash_reflect(key->h[3], &h);
+	}
 	return 0;
 }
 
@@ -195,7 +192,7 @@ static struct shash_alg ghash_alg = {
 	.base.cra_driver_name	= "ghash-ce-sync",
 	.base.cra_priority	= 300 - 1,
 	.base.cra_blocksize	= GHASH_BLOCK_SIZE,
-	.base.cra_ctxsize	= sizeof(struct ghash_key),
+	.base.cra_ctxsize	= sizeof(struct ghash_key) + sizeof(u64[2]),
 	.base.cra_module	= THIS_MODULE,
 };
 
@@ -354,10 +351,10 @@ static int __init ghash_ce_mod_init(void)
 	if (!(elf_hwcap & HWCAP_NEON))
 		return -ENODEV;
 
-	if (elf_hwcap2 & HWCAP2_PMULL)
-		pmull_ghash_update = pmull_ghash_update_p64;
-	else
-		pmull_ghash_update = pmull_ghash_update_p8;
+	if (elf_hwcap2 & HWCAP2_PMULL) {
+		ghash_alg.base.cra_ctxsize += 3 * sizeof(u64[2]);
+		static_branch_enable(&use_p64);
+	}
 
 	err = crypto_register_shash(&ghash_alg);
 	if (err)
diff --git a/arch/arm/crypto/sha1-armv4-large.S b/arch/arm/crypto/sha1-armv4-large.S
index f82cd8cf5a09..1c8b685149f2 100644
--- a/arch/arm/crypto/sha1-armv4-large.S
+++ b/arch/arm/crypto/sha1-armv4-large.S
@@ -13,7 +13,7 @@
 @ Written by Andy Polyakov <appro@fy.chalmers.se> for the OpenSSL
 @ project. The module is, however, dual licensed under OpenSSL and
 @ CRYPTOGAMS licenses depending on where you obtain it. For further
-@ details see http://www.openssl.org/~appro/cryptogams/.
+@ details see https://www.openssl.org/~appro/cryptogams/.
 @ ====================================================================
 
 @ sha1_block procedure for ARMv4.
diff --git a/arch/arm/crypto/sha256-armv4.pl b/arch/arm/crypto/sha256-armv4.pl
index a03cf4dfb781..9f96ff48e4a8 100644
--- a/arch/arm/crypto/sha256-armv4.pl
+++ b/arch/arm/crypto/sha256-armv4.pl
@@ -13,7 +13,7 @@
 # Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
 # project. The module is, however, dual licensed under OpenSSL and
 # CRYPTOGAMS licenses depending on where you obtain it. For further
-# details see http://www.openssl.org/~appro/cryptogams/.
+# details see https://www.openssl.org/~appro/cryptogams/.
 # ====================================================================
 
 # SHA256 block procedure for ARMv4. May 2007.
diff --git a/arch/arm/crypto/sha256-core.S_shipped b/arch/arm/crypto/sha256-core.S_shipped
index 054aae0edfce..ea04b2ab0c33 100644
--- a/arch/arm/crypto/sha256-core.S_shipped
+++ b/arch/arm/crypto/sha256-core.S_shipped
@@ -12,7 +12,7 @@
 @ Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
 @ project. The module is, however, dual licensed under OpenSSL and
 @ CRYPTOGAMS licenses depending on where you obtain it. For further
-@ details see http://www.openssl.org/~appro/cryptogams/.
+@ details see https://www.openssl.org/~appro/cryptogams/.
 @ ====================================================================
 
 @ SHA256 block procedure for ARMv4. May 2007.
diff --git a/arch/arm/crypto/sha512-armv4.pl b/arch/arm/crypto/sha512-armv4.pl
index 788c17b56ecc..69df68981acd 100644
--- a/arch/arm/crypto/sha512-armv4.pl
+++ b/arch/arm/crypto/sha512-armv4.pl
@@ -13,7 +13,7 @@
 # Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
 # project. The module is, however, dual licensed under OpenSSL and
 # CRYPTOGAMS licenses depending on where you obtain it. For further
-# details see http://www.openssl.org/~appro/cryptogams/.
+# details see https://www.openssl.org/~appro/cryptogams/.
 # ====================================================================
 
 # SHA512 block procedure for ARMv4. September 2007.
@@ -43,7 +43,7 @@
 # terms it's 22.6 cycles per byte, which is disappointing result.
 # Technical writers asserted that 3-way S4 pipeline can sustain
 # multiple NEON instructions per cycle, but dual NEON issue could
-# not be observed, see http://www.openssl.org/~appro/Snapdragon-S4.html
+# not be observed, see https://www.openssl.org/~appro/Snapdragon-S4.html
 # for further details. On side note Cortex-A15 processes one byte in
 # 16 cycles.
 
diff --git a/arch/arm/crypto/sha512-core.S_shipped b/arch/arm/crypto/sha512-core.S_shipped
index 710ea309769e..cb147db5cbfe 100644
--- a/arch/arm/crypto/sha512-core.S_shipped
+++ b/arch/arm/crypto/sha512-core.S_shipped
@@ -12,7 +12,7 @@
 @ Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
 @ project. The module is, however, dual licensed under OpenSSL and
 @ CRYPTOGAMS licenses depending on where you obtain it. For further
-@ details see http://www.openssl.org/~appro/cryptogams/.
+@ details see https://www.openssl.org/~appro/cryptogams/.
 @ ====================================================================
 
 @ SHA512 block procedure for ARMv4. September 2007.
@@ -42,7 +42,7 @@
 @ terms it's 22.6 cycles per byte, which is disappointing result.
 @ Technical writers asserted that 3-way S4 pipeline can sustain
 @ multiple NEON instructions per cycle, but dual NEON issue could
-@ not be observed, see http://www.openssl.org/~appro/Snapdragon-S4.html
+@ not be observed, see https://www.openssl.org/~appro/Snapdragon-S4.html
 @ for further details. On side note Cortex-A15 processes one byte in
 @ 16 cycles.
 
diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h
index 75bb2c543e59..455eb19a5ac1 100644
--- a/arch/arm/include/asm/atomic.h
+++ b/arch/arm/include/asm/atomic.h
@@ -15,8 +15,6 @@
 #include <asm/barrier.h>
 #include <asm/cmpxchg.h>
 
-#define ATOMIC_INIT(i)	{ (i) }
-
 #ifdef __KERNEL__
 
 /*
diff --git a/arch/arm/include/asm/efi.h b/arch/arm/include/asm/efi.h
index 84dc0ba822f5..5dcf3c6011b7 100644
--- a/arch/arm/include/asm/efi.h
+++ b/arch/arm/include/asm/efi.h
@@ -87,4 +87,11 @@ static inline unsigned long efi_get_max_initrd_addr(unsigned long dram_base,
 	return dram_base + SZ_512M;
 }
 
+struct efi_arm_entry_state {
+	u32	cpsr_before_ebs;
+	u32	sctlr_before_ebs;
+	u32	cpsr_after_ebs;
+	u32	sctlr_after_ebs;
+};
+
 #endif /* _ASM_ARM_EFI_H */
diff --git a/arch/arm/include/asm/percpu.h b/arch/arm/include/asm/percpu.h
index f44f448537f2..e2fcb3cfd3de 100644
--- a/arch/arm/include/asm/percpu.h
+++ b/arch/arm/include/asm/percpu.h
@@ -5,6 +5,8 @@
 #ifndef _ASM_ARM_PERCPU_H_
 #define _ASM_ARM_PERCPU_H_
 
+register unsigned long current_stack_pointer asm ("sp");
+
 /*
  * Same as asm-generic/percpu.h, except that we store the per cpu offset
  * in the TPIDRPRW. TPIDRPRW only exists on V6K and V7
diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
index 3609a6980c34..536b6b979f63 100644
--- a/arch/arm/include/asm/thread_info.h
+++ b/arch/arm/include/asm/thread_info.h
@@ -76,11 +76,6 @@ struct thread_info {
 }
 
 /*
- * how to get the current stack pointer in C
- */
-register unsigned long current_stack_pointer asm ("sp");
-
-/*
  * how to get the thread information struct from C
  */
 static inline struct thread_info *current_thread_info(void) __attribute_const__;
diff --git a/arch/arm/include/asm/topology.h b/arch/arm/include/asm/topology.h
index 435aba289fc5..e0593cf095d0 100644
--- a/arch/arm/include/asm/topology.h
+++ b/arch/arm/include/asm/topology.h
@@ -16,8 +16,9 @@
 /* Enable topology flag updates */
 #define arch_update_cpu_topology topology_update_cpu_topology
 
-/* Replace task scheduler's default thermal pressure retrieve API */
+/* Replace task scheduler's default thermal pressure API */
 #define arch_scale_thermal_pressure topology_get_thermal_pressure
+#define arch_set_thermal_pressure   topology_set_thermal_pressure
 
 #else
 
diff --git a/arch/arm/include/asm/vdso/gettimeofday.h b/arch/arm/include/asm/vdso/gettimeofday.h
index 36dc18553ed8..1b207cf07697 100644
--- a/arch/arm/include/asm/vdso/gettimeofday.h
+++ b/arch/arm/include/asm/vdso/gettimeofday.h
@@ -7,6 +7,7 @@
 
 #ifndef __ASSEMBLY__
 
+#include <asm/barrier.h>
 #include <asm/errno.h>
 #include <asm/unistd.h>
 #include <asm/vdso/cp15.h>
diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c
index c036a4a2f8e2..a1570c8bab25 100644
--- a/arch/arm/kernel/asm-offsets.c
+++ b/arch/arm/kernel/asm-offsets.c
@@ -31,15 +31,6 @@
 #if defined(__APCS_26__)
 #error Sorry, your compiler targets APCS-26 but this kernel requires APCS-32
 #endif
-/*
- * GCC 4.8.0-4.8.2: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58854
- *	      miscompiles find_get_entry(), and can result in EXT3 and EXT4
- *	      filesystem corruption (possibly other FS too).
- */
-#if defined(GCC_VERSION) && GCC_VERSION >= 40800 && GCC_VERSION < 40803
-#error Your compiler is too buggy; it is known to miscompile kernels
-#error and result in filesystem corruption and oopses.
-#endif
 
 int main(void)
 {
diff --git a/arch/arm/kernel/ftrace.c b/arch/arm/kernel/ftrace.c
index 10499d44964a..9a79ef6b1876 100644
--- a/arch/arm/kernel/ftrace.c
+++ b/arch/arm/kernel/ftrace.c
@@ -84,7 +84,8 @@ static int ftrace_modify_code(unsigned long pc, unsigned long old,
 		old = __opcode_to_mem_arm(old);
 
 	if (validate) {
-		if (probe_kernel_read(&replaced, (void *)pc, MCOUNT_INSN_SIZE))
+		if (copy_from_kernel_nofault(&replaced, (void *)pc,
+				MCOUNT_INSN_SIZE))
 			return -EFAULT;
 
 		if (replaced != old)
diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c
index 02ca7adf5375..7fff88e61252 100644
--- a/arch/arm/kernel/hw_breakpoint.c
+++ b/arch/arm/kernel/hw_breakpoint.c
@@ -683,6 +683,12 @@ static void disable_single_step(struct perf_event *bp)
 	arch_install_hw_breakpoint(bp);
 }
 
+static int watchpoint_fault_on_uaccess(struct pt_regs *regs,
+				       struct arch_hw_breakpoint *info)
+{
+	return !user_mode(regs) && info->ctrl.privilege == ARM_BREAKPOINT_USER;
+}
+
 static void watchpoint_handler(unsigned long addr, unsigned int fsr,
 			       struct pt_regs *regs)
 {
@@ -742,16 +748,27 @@ static void watchpoint_handler(unsigned long addr, unsigned int fsr,
 		}
 
 		pr_debug("watchpoint fired: address = 0x%x\n", info->trigger);
+
+		/*
+		 * If we triggered a user watchpoint from a uaccess routine,
+		 * then handle the stepping ourselves since userspace really
+		 * can't help us with this.
+		 */
+		if (watchpoint_fault_on_uaccess(regs, info))
+			goto step;
+
 		perf_bp_event(wp, regs);
 
 		/*
-		 * If no overflow handler is present, insert a temporary
-		 * mismatch breakpoint so we can single-step over the
-		 * watchpoint trigger.
+		 * Defer stepping to the overflow handler if one is installed.
+		 * Otherwise, insert a temporary mismatch breakpoint so that
+		 * we can single-step over the watchpoint trigger.
 		 */
-		if (is_default_overflow_handler(wp))
-			enable_single_step(wp, instruction_pointer(regs));
+		if (!is_default_overflow_handler(wp))
+			goto unlock;
 
+step:
+		enable_single_step(wp, instruction_pointer(regs));
 unlock:
 		rcu_read_unlock();
 	}
diff --git a/arch/arm/kernel/kgdb.c b/arch/arm/kernel/kgdb.c
index 6a95b9296640..7bd30c0a4280 100644
--- a/arch/arm/kernel/kgdb.c
+++ b/arch/arm/kernel/kgdb.c
@@ -236,7 +236,7 @@ int kgdb_arch_set_breakpoint(struct kgdb_bkpt *bpt)
 	/* patch_text() only supports int-sized breakpoints */
 	BUILD_BUG_ON(sizeof(int) != BREAK_INSTR_SIZE);
 
-	err = probe_kernel_read(bpt->saved_instr, (char *)bpt->bpt_addr,
+	err = copy_from_kernel_nofault(bpt->saved_instr, (char *)bpt->bpt_addr,
 				BREAK_INSTR_SIZE);
 	if (err)
 		return err;
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 58eaa1f60e16..3395be186c7d 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -225,9 +225,8 @@ void release_thread(struct task_struct *dead_task)
 
 asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");
 
-int
-copy_thread_tls(unsigned long clone_flags, unsigned long stack_start,
-	    unsigned long stk_sz, struct task_struct *p, unsigned long tls)
+int copy_thread(unsigned long clone_flags, unsigned long stack_start,
+		unsigned long stk_sz, struct task_struct *p, unsigned long tls)
 {
 	struct thread_info *thread = task_thread_info(p);
 	struct pt_regs *childregs = task_pt_regs(p);
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 65a3b1e75480..17d5a785df28 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -396,7 +396,7 @@ int is_valid_bugaddr(unsigned long pc)
 	u32 insn = __opcode_to_mem_arm(BUG_INSTR_VALUE);
 #endif
 
-	if (probe_kernel_address((unsigned *)pc, bkpt))
+	if (get_kernel_nofault(bkpt, (void *)pc))
 		return 0;
 
 	return bkpt == insn;
diff --git a/arch/arm/kernel/vdso.c b/arch/arm/kernel/vdso.c
index 6bfdca4769a7..fddd08a6e063 100644
--- a/arch/arm/kernel/vdso.c
+++ b/arch/arm/kernel/vdso.c
@@ -184,6 +184,7 @@ static void __init patch_vdso(void *ehdr)
 	if (!cntvct_ok) {
 		vdso_nullpatch_one(&einfo, "__vdso_gettimeofday");
 		vdso_nullpatch_one(&einfo, "__vdso_clock_gettime");
+		vdso_nullpatch_one(&einfo, "__vdso_clock_gettime64");
 	}
 }
 
diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
index cec195d4fcba..5dde7328a7a9 100644
--- a/arch/arm/mach-at91/Makefile.boot
+++ b/arch/arm/mach-at91/Makefile.boot
@@ -1,4 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0-only
 # Empty file waiting for deletion once Makefile.boot isn't needed any more.
 # Patch waits for application at
-# http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=7889/1 .
+# https://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=7889/1 .
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 074bde64064e..2aab043441e8 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -592,13 +592,13 @@ static void __init at91_pm_sram_init(void)
 	sram_pool = gen_pool_get(&pdev->dev, NULL);
 	if (!sram_pool) {
 		pr_warn("%s: sram pool unavailable!\n", __func__);
-		return;
+		goto out_put_device;
 	}
 
 	sram_base = gen_pool_alloc(sram_pool, at91_pm_suspend_in_sram_sz);
 	if (!sram_base) {
 		pr_warn("%s: unable to alloc sram!\n", __func__);
-		return;
+		goto out_put_device;
 	}
 
 	sram_pbase = gen_pool_virt_to_phys(sram_pool, sram_base);
@@ -606,12 +606,17 @@ static void __init at91_pm_sram_init(void)
 					at91_pm_suspend_in_sram_sz, false);
 	if (!at91_suspend_sram_fn) {
 		pr_warn("SRAM: Could not map\n");
-		return;
+		goto out_put_device;
 	}
 
 	/* Copy the pm suspend handler to SRAM */
 	at91_suspend_sram_fn = fncpy(at91_suspend_sram_fn,
 			&at91_pm_suspend_in_sram, at91_pm_suspend_in_sram_sz);
+	return;
+
+out_put_device:
+	put_device(&pdev->dev);
+	return;
 }
 
 static bool __init at91_is_pm_mode_active(int pm_mode)
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index 6aa938b949db..1df0ee01ee02 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -53,6 +53,7 @@ config ARCH_BCM_NSP
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_775420
 	select ARM_ERRATA_764369 if SMP
+	select ARM_TIMER_SP804
 	select THERMAL
 	select THERMAL_OF
 	help
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index d028d38a44bf..f56ff8c24043 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -201,15 +201,13 @@ config MACH_MITYOMAPL138
 	help
 	  Say Y here to select the Critical Link MityDSP-L138/MityARM-1808
 	  System on Module.  Information on this SoM may be found at
-	  http://www.mitydsp.com
+	  https://www.mitydsp.com
 
 config MACH_OMAPL138_HAWKBOARD
 	bool "TI AM1808 / OMAPL-138 Hawkboard platform"
 	depends on ARCH_DAVINCI_DA850
 	help
 	  Say Y here to select the TI AM1808 / OMAPL-138 Hawkboard platform .
-	  Information of this board may be found at
-	  http://www.hawkboard.org/
 
 config DAVINCI_MUX
 	bool "DAVINCI multiplexing support"
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index a273ab25c668..1076886938b6 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -266,7 +266,7 @@ static struct mtd_partition da830_evm_nand_partitions[] = {
 	}
 };
 
-/* flash bbt decriptors */
+/* flash bbt descriptors */
 static uint8_t da830_evm_nand_bbt_pattern[] = { 'B', 'b', 't', '0' };
 static uint8_t da830_evm_nand_mirror_pattern[] = { '1', 't', 'b', 'B' };
 
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 5b3549f1236c..6751292e5f8f 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -1,7 +1,7 @@
 /*
  * TI DA850/OMAP-L138 EVM board
  *
- * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2009 Texas Instruments Incorporated - https://www.ti.com/
  *
  * Derived from: arch/arm/mach-davinci/board-da830-evm.c
  * Original Copyrights follow:
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 4600b617f9b4..dd7d60f4139a 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -267,20 +267,15 @@ static int evm_sw_setup(struct i2c_client *client, int gpio,
 		evm_sw_gpio[i] = gpio++;
 
 		status = gpio_direction_input(evm_sw_gpio[i]);
-		if (status) {
-			gpio_free(evm_sw_gpio[i]);
-			evm_sw_gpio[i] = -EINVAL;
+		if (status)
 			goto out_free;
-		}
 
 		status = gpio_export(evm_sw_gpio[i], 0);
-		if (status) {
-			gpio_free(evm_sw_gpio[i]);
-			evm_sw_gpio[i] = -EINVAL;
+		if (status)
 			goto out_free;
-		}
 	}
-	return status;
+	return 0;
+
 out_free:
 	for (i = 0; i < 4; ++i) {
 		if (evm_sw_gpio[i] != -EINVAL) {
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index dfce421c0579..3382b93d9a2a 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -1,7 +1,7 @@
 /*
  * Critical Link MityOMAP-L138 SoM
  *
- * Copyright (C) 2010 Critical Link LLC - http://www.criticallink.com
+ * Copyright (C) 2010 Critical Link LLC - https://www.criticallink.com
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2. This program is licensed "as is" without any warranty of
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index ce99f782811a..6cf46bbc7e1d 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -214,7 +214,7 @@ static __init void davinci_ntosd2_init(void)
 	 * Mux the pins to be GPIOs, VLYNQEN is already done at startup.
 	 * The AEAWx are five new AEAW pins that can be muxed by separately.
 	 * They are a bitmask for GPIO management. According TI
-	 * documentation (http://www.ti.com/lit/gpn/tms320dm6446) to employ
+	 * documentation (https://www.ti.com/lit/gpn/tms320dm6446) to employ
 	 * gpio(10,11,12,13) for leds any combination of bits works except
 	 * four last. So we are to reset all five.
 	 */
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index 5390a8630cf0..6c79039002c9 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -3,7 +3,7 @@
  *
  * Initial code: Syed Mohammed Khasim
  *
- * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com
+ * Copyright (C) 2009 Texas Instruments Incorporated - https://www.ti.com
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2. This program is licensed "as is" without any warranty of
diff --git a/arch/arm/mach-davinci/cpuidle.c b/arch/arm/mach-davinci/cpuidle.c
index b795f671bd03..dd38785536d5 100644
--- a/arch/arm/mach-davinci/cpuidle.c
+++ b/arch/arm/mach-davinci/cpuidle.c
@@ -2,7 +2,7 @@
 /*
  * CPU idle for DaVinci SoCs
  *
- * Copyright (C) 2009 Texas Instruments Incorporated. http://www.ti.com/
+ * Copyright (C) 2009 Texas Instruments Incorporated. https://www.ti.com/
  *
  * Derived from Marvell Kirkwood CPU idle code
  * (arch/arm/mach-kirkwood/cpuidle.c)
diff --git a/arch/arm/mach-davinci/cpuidle.h b/arch/arm/mach-davinci/cpuidle.h
index 74f088b0edfb..0d9193aefab5 100644
--- a/arch/arm/mach-davinci/cpuidle.h
+++ b/arch/arm/mach-davinci/cpuidle.h
@@ -1,7 +1,7 @@
 /*
  * TI DaVinci cpuidle platform support
  *
- * 2009 (C) Texas Instruments, Inc. http://www.ti.com/
+ * 2009 (C) Texas Instruments, Inc. https://www.ti.com/
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2. This program is licensed "as is" without any warranty of any
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 73b7cc53f966..68156e7239a6 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -1,7 +1,7 @@
 /*
  * TI DA850/OMAP-L138 chip specific setup
  *
- * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2009 Texas Instruments Incorporated - https://www.ti.com/
  *
  * Derived from: arch/arm/mach-davinci/da830.c
  * Original Copyrights follow:
diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c
index 9c0dd028d5ad..0cd2f30aeb9c 100644
--- a/arch/arm/mach-davinci/da8xx-dt.c
+++ b/arch/arm/mach-davinci/da8xx-dt.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  *
  * Modified from mach-omap/omap2/board-generic.c
  */
diff --git a/arch/arm/mach-davinci/include/mach/pm.h b/arch/arm/mach-davinci/include/mach/pm.h
index 37b19bf35a85..5a5f0ecc0704 100644
--- a/arch/arm/mach-davinci/include/mach/pm.h
+++ b/arch/arm/mach-davinci/include/mach/pm.h
@@ -1,7 +1,7 @@
 /*
  * TI DaVinci platform support for power management.
  *
- * Copyright (C) 2009 Texas Instruments, Inc. http://www.ti.com/
+ * Copyright (C) 2009 Texas Instruments, Inc. https://www.ti.com/
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
diff --git a/arch/arm/mach-davinci/pm.c b/arch/arm/mach-davinci/pm.c
index e33c6bcb4598..323ee4e657c4 100644
--- a/arch/arm/mach-davinci/pm.c
+++ b/arch/arm/mach-davinci/pm.c
@@ -2,7 +2,7 @@
 /*
  * DaVinci Power Management Routines
  *
- * Copyright (C) 2009 Texas Instruments, Inc. http://www.ti.com/
+ * Copyright (C) 2009 Texas Instruments, Inc. https://www.ti.com/
  */
 
 #include <linux/pm.h>
diff --git a/arch/arm/mach-davinci/sleep.S b/arch/arm/mach-davinci/sleep.S
index 71262dcdbca3..d5affab4396d 100644
--- a/arch/arm/mach-davinci/sleep.S
+++ b/arch/arm/mach-davinci/sleep.S
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0-only */
 /*
- * (C) Copyright 2009, Texas Instruments, Inc. http://www.ti.com/
+ * (C) Copyright 2009, Texas Instruments, Inc. https://www.ti.com/
  */
 
 /* replicated define because linux/bitops.h cannot be included in assembly */
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 76838255b5fa..f185cd3d4c62 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -118,6 +118,7 @@ config SOC_EXYNOS5800
 	bool "Samsung EXYNOS5800"
 	default y
 	depends on SOC_EXYNOS5420
+	select EXYNOS_REGULATOR_COUPLER
 
 config EXYNOS_MCPM
 	bool
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index 7a8d1555db40..36c37444485a 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -193,7 +193,7 @@ static void __init exynos_dt_fixup(void)
 }
 
 DT_MACHINE_START(EXYNOS_DT, "Samsung Exynos (Flattened Device Tree)")
-	.l2c_aux_val	= 0x3c400001,
+	.l2c_aux_val	= 0x3c400000,
 	.l2c_aux_mask	= 0xc20fffff,
 	.smp		= smp_ops(exynos_smp_ops),
 	.map_io		= exynos_init_io,
diff --git a/arch/arm/mach-exynos/mcpm-exynos.c b/arch/arm/mach-exynos/mcpm-exynos.c
index 9a681b421ae1..cd861c57d5ad 100644
--- a/arch/arm/mach-exynos/mcpm-exynos.c
+++ b/arch/arm/mach-exynos/mcpm-exynos.c
@@ -26,6 +26,7 @@
 #define EXYNOS5420_USE_L2_COMMON_UP_STATE	BIT(30)
 
 static void __iomem *ns_sram_base_addr __ro_after_init;
+static bool secure_firmware __ro_after_init;
 
 /*
  * The common v7_exit_coherency_flush API could not be used because of the
@@ -58,15 +59,16 @@ static void __iomem *ns_sram_base_addr __ro_after_init;
 static int exynos_cpu_powerup(unsigned int cpu, unsigned int cluster)
 {
 	unsigned int cpunr = cpu + (cluster * EXYNOS5420_CPUS_PER_CLUSTER);
+	bool state;
 
 	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
 	if (cpu >= EXYNOS5420_CPUS_PER_CLUSTER ||
 		cluster >= EXYNOS5420_NR_CLUSTERS)
 		return -EINVAL;
 
-	if (!exynos_cpu_power_state(cpunr)) {
-		exynos_cpu_power_up(cpunr);
-
+	state = exynos_cpu_power_state(cpunr);
+	exynos_cpu_power_up(cpunr);
+	if (!state && secure_firmware) {
 		/*
 		 * This assumes the cluster number of the big cores(Cortex A15)
 		 * is 0 and the Little cores(Cortex A7) is 1.
@@ -258,6 +260,8 @@ static int __init exynos_mcpm_init(void)
 		return -ENOMEM;
 	}
 
+	secure_firmware = exynos_secure_firmware_available();
+
 	/*
 	 * To increase the stability of KFC reset we need to program
 	 * the PMU SPARE3 register
diff --git a/arch/arm/mach-imx/devices-imx27.h b/arch/arm/mach-imx/devices-imx27.h
index f89f4ae0e1ca..583a1d773d68 100644
--- a/arch/arm/mach-imx/devices-imx27.h
+++ b/arch/arm/mach-imx/devices-imx27.h
@@ -75,11 +75,11 @@ extern const struct imx_mxc_w1_data imx27_mxc_w1_data;
 	imx_add_mxc_w1(&imx27_mxc_w1_data)
 
 extern const struct imx_spi_imx_data imx27_cspi_data[];
-#define imx27_add_cspi(id, pdata)	\
-	imx_add_spi_imx(&imx27_cspi_data[id], pdata)
-#define imx27_add_spi_imx0(pdata)	imx27_add_cspi(0, pdata)
-#define imx27_add_spi_imx1(pdata)	imx27_add_cspi(1, pdata)
-#define imx27_add_spi_imx2(pdata)	imx27_add_cspi(2, pdata)
+#define imx27_add_cspi(id, gtable) \
+	imx_add_spi_imx(&imx27_cspi_data[id], gtable)
+#define imx27_add_spi_imx0(gtable)	imx27_add_cspi(0, gtable)
+#define imx27_add_spi_imx1(gtable)	imx27_add_cspi(1, gtable)
+#define imx27_add_spi_imx2(gtable)	imx27_add_cspi(2, gtable)
 
 extern const struct imx_pata_imx_data imx27_pata_imx_data;
 #define imx27_add_pata_imx() \
diff --git a/arch/arm/mach-imx/devices-imx31.h b/arch/arm/mach-imx/devices-imx31.h
index 5a4ba35a47ed..f7cc62372532 100644
--- a/arch/arm/mach-imx/devices-imx31.h
+++ b/arch/arm/mach-imx/devices-imx31.h
@@ -69,11 +69,11 @@ extern const struct imx_mxc_w1_data imx31_mxc_w1_data;
 	imx_add_mxc_w1(&imx31_mxc_w1_data)
 
 extern const struct imx_spi_imx_data imx31_cspi_data[];
-#define imx31_add_cspi(id, pdata)	\
-	imx_add_spi_imx(&imx31_cspi_data[id], pdata)
-#define imx31_add_spi_imx0(pdata)	imx31_add_cspi(0, pdata)
-#define imx31_add_spi_imx1(pdata)	imx31_add_cspi(1, pdata)
-#define imx31_add_spi_imx2(pdata)	imx31_add_cspi(2, pdata)
+#define imx31_add_cspi(id, gtable) \
+	imx_add_spi_imx(&imx31_cspi_data[id], gtable)
+#define imx31_add_spi_imx0(gtable)	imx31_add_cspi(0, gtable)
+#define imx31_add_spi_imx1(gtable)	imx31_add_cspi(1, gtable)
+#define imx31_add_spi_imx2(gtable)	imx31_add_cspi(2, gtable)
 
 extern const struct imx_pata_imx_data imx31_pata_imx_data;
 #define imx31_add_pata_imx() \
diff --git a/arch/arm/mach-imx/devices/devices-common.h b/arch/arm/mach-imx/devices/devices-common.h
index 2a685adec1df..327a1de7dce1 100644
--- a/arch/arm/mach-imx/devices/devices-common.h
+++ b/arch/arm/mach-imx/devices/devices-common.h
@@ -6,6 +6,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/init.h>
+#include <linux/gpio/machine.h>
 #include <linux/platform_data/dma-imx-sdma.h>
 
 extern struct device mxc_aips_bus;
@@ -276,7 +277,6 @@ struct platform_device *__init imx_add_sdhci_esdhc_imx(
 		const struct imx_sdhci_esdhc_imx_data *data,
 		const struct esdhc_platform_data *pdata);
 
-#include <linux/platform_data/spi-imx.h>
 struct imx_spi_imx_data {
 	const char *devid;
 	int id;
@@ -285,10 +285,9 @@ struct imx_spi_imx_data {
 	int irq;
 };
 struct platform_device *__init imx_add_spi_imx(
-		const struct imx_spi_imx_data *data,
-		const struct spi_imx_master *pdata);
+	const struct imx_spi_imx_data *data, struct gpiod_lookup_table *gtable);
 
 struct platform_device *imx_add_imx_dma(char *name, resource_size_t iobase,
-					int irq, int irq_err);
+					int irq);
 struct platform_device *imx_add_imx_sdma(char *name,
 	resource_size_t iobase, int irq, struct sdma_platform_data *pdata);
diff --git a/arch/arm/mach-imx/devices/platform-gpio-mxc.c b/arch/arm/mach-imx/devices/platform-gpio-mxc.c
index 78628ef12672..355de845224c 100644
--- a/arch/arm/mach-imx/devices/platform-gpio-mxc.c
+++ b/arch/arm/mach-imx/devices/platform-gpio-mxc.c
@@ -24,7 +24,8 @@ struct platform_device *__init mxc_register_gpio(char *name, int id,
 			.flags = IORESOURCE_IRQ,
 		},
 	};
+	unsigned int nres;
 
-	return platform_device_register_resndata(&mxc_aips_bus,
-			name, id, res, ARRAY_SIZE(res), NULL, 0);
+	nres = irq_high ? ARRAY_SIZE(res) : ARRAY_SIZE(res) - 1;
+	return platform_device_register_resndata(&mxc_aips_bus, name, id, res, nres, NULL, 0);
 }
diff --git a/arch/arm/mach-imx/devices/platform-imx-dma.c b/arch/arm/mach-imx/devices/platform-imx-dma.c
index 26b47b36257b..12656f24ad0d 100644
--- a/arch/arm/mach-imx/devices/platform-imx-dma.c
+++ b/arch/arm/mach-imx/devices/platform-imx-dma.c
@@ -6,7 +6,7 @@
 #include "devices-common.h"
 
 struct platform_device __init __maybe_unused *imx_add_imx_dma(char *name,
-	resource_size_t iobase, int irq, int irq_err)
+	resource_size_t iobase, int irq)
 {
 	struct resource res[] = {
 		{
@@ -17,10 +17,6 @@ struct platform_device __init __maybe_unused *imx_add_imx_dma(char *name,
 			.start = irq,
 			.end = irq,
 			.flags = IORESOURCE_IRQ,
-		}, {
-			.start = irq_err,
-			.end = irq_err,
-			.flags = IORESOURCE_IRQ,
 		},
 	};
 
diff --git a/arch/arm/mach-imx/devices/platform-spi_imx.c b/arch/arm/mach-imx/devices/platform-spi_imx.c
index f2cafa52c187..27747bf628a3 100644
--- a/arch/arm/mach-imx/devices/platform-spi_imx.c
+++ b/arch/arm/mach-imx/devices/platform-spi_imx.c
@@ -3,6 +3,7 @@
  * Copyright (C) 2009-2010 Pengutronix
  * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
  */
+#include <linux/gpio/machine.h>
 #include "../hardware.h"
 #include "devices-common.h"
 
@@ -57,8 +58,7 @@ const struct imx_spi_imx_data imx35_cspi_data[] __initconst = {
 #endif /* ifdef CONFIG_SOC_IMX35 */
 
 struct platform_device *__init imx_add_spi_imx(
-		const struct imx_spi_imx_data *data,
-		const struct spi_imx_master *pdata)
+	const struct imx_spi_imx_data *data, struct gpiod_lookup_table *gtable)
 {
 	struct resource res[] = {
 		{
@@ -71,7 +71,8 @@ struct platform_device *__init imx_add_spi_imx(
 			.flags = IORESOURCE_IRQ,
 		},
 	};
-
+	if (gtable)
+		gpiod_add_lookup_table(gtable);
 	return imx_add_platform_device(data->devid, data->id,
-			res, ARRAY_SIZE(res), pdata, sizeof(*pdata));
+			res, ARRAY_SIZE(res), NULL, 0);
 }
diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index 1da5f07952ac..2db4475b7f85 100644
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -303,18 +303,34 @@ static struct imx_ssi_platform_data mx27_3ds_ssi_pdata = {
 };
 
 /* SPI */
-static int spi1_chipselect[] = {SPI1_SS0};
-
-static const struct spi_imx_master spi1_pdata __initconst = {
-	.chipselect	= spi1_chipselect,
-	.num_chipselect	= ARRAY_SIZE(spi1_chipselect),
+static struct gpiod_lookup_table mx27_spi1_gpiod_table = {
+	.dev_id = "imx27-cspi.0", /* Actual device name for spi1 */
+	.table = {
+		/*
+		 * The i.MX27 has the i.MX21 GPIO controller, the SPI1 CS GPIO
+		 * SPI1_SS0 is numbered IMX_GPIO_NR(4, 28).
+		 *
+		 * This is in "bank 4" which is subtracted by one in the macro
+		 * so this is actually bank 3 on "imx21-gpio.3".
+		 */
+		GPIO_LOOKUP_IDX("imx21-gpio.3", 28, "cs", 0, GPIO_ACTIVE_LOW),
+		{ },
+	},
 };
 
-static int spi2_chipselect[] = {SPI2_SS0};
-
-static const struct spi_imx_master spi2_pdata __initconst = {
-	.chipselect	= spi2_chipselect,
-	.num_chipselect	= ARRAY_SIZE(spi2_chipselect),
+static struct gpiod_lookup_table mx27_spi2_gpiod_table = {
+	.dev_id = "imx27-cspi.1", /* Actual device name for spi2 */
+	.table = {
+		/*
+		 * The i.MX27 has the i.MX21 GPIO controller, the SPI2 CS GPIO
+		 * SPI2_SS0 is numbered IMX_GPIO_NR(4, 21).
+		 *
+		 * This is in "bank 4" which is subtracted by one in the macro
+		 * so this is actually bank 3 on "imx21-gpio.3".
+		 */
+		GPIO_LOOKUP_IDX("imx21-gpio.3", 21, "cs", 0, GPIO_ACTIVE_LOW),
+		{ },
+	},
 };
 
 static struct imx_fb_videomode mx27_3ds_modes[] = {
@@ -397,8 +413,8 @@ static void __init mx27pdk_init(void)
 	imx27_add_imx_keypad(&mx27_3ds_keymap_data);
 	imx27_add_imx2_wdt();
 
-	imx27_add_spi_imx1(&spi2_pdata);
-	imx27_add_spi_imx0(&spi1_pdata);
+	imx27_add_spi_imx1(&mx27_spi2_gpiod_table);
+	imx27_add_spi_imx0(&mx27_spi1_gpiod_table);
 
 	imx27_add_imx_i2c(0, &mx27_3ds_i2c0_data);
 	imx27_add_imx_fb(&mx27_3ds_fb_data);
diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c
index e81386190479..23e63d3b4c6a 100644
--- a/arch/arm/mach-imx/mach-mx31_3ds.c
+++ b/arch/arm/mach-imx/mach-mx31_3ds.c
@@ -378,15 +378,6 @@ static struct imx_ssi_platform_data mx31_3ds_ssi_pdata = {
 	.flags = IMX_SSI_DMA | IMX_SSI_NET,
 };
 
-/* SPI */
-static const struct spi_imx_master spi0_pdata __initconst = {
-	.num_chipselect	= 3,
-};
-
-static const struct spi_imx_master spi1_pdata __initconst = {
-	.num_chipselect	= 3,
-};
-
 static struct spi_board_info mx31_3ds_spi_devs[] __initdata = {
 	{
 		.modalias	= "mc13783",
@@ -561,14 +552,14 @@ static void __init mx31_3ds_init(void)
 	imx31_add_imx_uart0(&uart_pdata);
 	imx31_add_mxc_nand(&mx31_3ds_nand_board_info);
 
-	imx31_add_spi_imx1(&spi1_pdata);
+	imx31_add_spi_imx1(NULL);
 
 	imx31_add_imx_keypad(&mx31_3ds_keymap_data);
 
 	imx31_add_imx2_wdt();
 	imx31_add_imx_i2c0(&mx31_3ds_i2c0_data);
 
-	imx31_add_spi_imx0(&spi0_pdata);
+	imx31_add_spi_imx0(NULL);
 	imx31_add_ipu_core();
 	imx31_add_mx3_sdc_fb(&mx3fb_pdata);
 
diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c
index 8f725248299e..4b955ccc92cd 100644
--- a/arch/arm/mach-imx/mach-mx31lilly.c
+++ b/arch/arm/mach-imx/mach-mx31lilly.c
@@ -215,16 +215,6 @@ static void __init lilly1131_usb_init(void)
 		imx31_add_mxc_ehci_hs(2, &usbh2_pdata);
 }
 
-/* SPI */
-
-static const struct spi_imx_master spi0_pdata __initconst = {
-	.num_chipselect = 3,
-};
-
-static const struct spi_imx_master spi1_pdata __initconst = {
-	.num_chipselect = 3,
-};
-
 static struct mc13xxx_platform_data mc13783_pdata __initdata = {
 	.flags = MC13XXX_USE_RTC | MC13XXX_USE_TOUCHSCREEN,
 };
@@ -281,8 +271,8 @@ static void __init mx31lilly_board_init(void)
 	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS1__SS1, "SPI2_SS1");
 	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS2__SS2, "SPI2_SS2");
 
-	imx31_add_spi_imx0(&spi0_pdata);
-	imx31_add_spi_imx1(&spi1_pdata);
+	imx31_add_spi_imx0(NULL);
+	imx31_add_spi_imx1(NULL);
 
 	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
 }
diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c
index c0055f57c02d..aaccf52f7ac1 100644
--- a/arch/arm/mach-imx/mach-mx31lite.c
+++ b/arch/arm/mach-imx/mach-mx31lite.c
@@ -73,11 +73,6 @@ static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-/* SPI */
-static const struct spi_imx_master spi0_pdata __initconst = {
-	.num_chipselect	= 3,
-};
-
 static const struct mxc_nand_platform_data
 mx31lite_nand_board_info __initconst  = {
 	.width = 1,
@@ -111,16 +106,6 @@ static struct platform_device smsc911x_device = {
 	},
 };
 
-/*
- * SPI
- *
- * The MC13783 is the only hard-wired SPI device on the module.
- */
-
-static const struct spi_imx_master spi1_pdata __initconst = {
-	.num_chipselect	= 1,
-};
-
 static struct mc13xxx_platform_data mc13783_pdata __initdata = {
 	.flags = MC13XXX_USE_RTC,
 };
@@ -246,13 +231,13 @@ static void __init mx31lite_init(void)
 				      "mx31lite");
 
 	imx31_add_imx_uart0(&uart_pdata);
-	imx31_add_spi_imx0(&spi0_pdata);
+	imx31_add_spi_imx0(NULL);
 
 	/* NOR and NAND flash */
 	platform_device_register(&physmap_flash_device);
 	imx31_add_mxc_nand(&mx31lite_nand_board_info);
 
-	imx31_add_spi_imx1(&spi1_pdata);
+	imx31_add_spi_imx1(NULL);
 
 	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
 }
diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
index 36f08f45b0ca..96845a4eaf57 100644
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -143,10 +143,6 @@ static const struct imxi2c_platform_data moboard_i2c1_data __initconst = {
 	.bitrate = 100000,
 };
 
-static const struct spi_imx_master moboard_spi1_pdata __initconst = {
-	.num_chipselect	= 3,
-};
-
 static struct regulator_consumer_supply sdhc_consumers[] = {
 	{
 		.dev_name = "imx31-mmc.0",
@@ -287,10 +283,6 @@ static struct spi_board_info moboard_spi_board_info[] __initdata = {
 	},
 };
 
-static const struct spi_imx_master moboard_spi2_pdata __initconst = {
-	.num_chipselect	= 2,
-};
-
 #define SDHC1_CD IOMUX_TO_GPIO(MX31_PIN_ATA_CS0)
 #define SDHC1_WP IOMUX_TO_GPIO(MX31_PIN_ATA_CS1)
 
@@ -514,8 +506,8 @@ static void __init mx31moboard_init(void)
 	imx31_add_imx_i2c0(&moboard_i2c0_data);
 	imx31_add_imx_i2c1(&moboard_i2c1_data);
 
-	imx31_add_spi_imx1(&moboard_spi1_pdata);
-	imx31_add_spi_imx2(&moboard_spi2_pdata);
+	imx31_add_spi_imx1(NULL);
+	imx31_add_spi_imx2(NULL);
 
 	mx31moboard_init_cam();
 
diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
index 2e28e1b5cddf..27a3678e0658 100644
--- a/arch/arm/mach-imx/mach-pca100.c
+++ b/arch/arm/mach-imx/mach-pca100.c
@@ -14,6 +14,7 @@
 #include <linux/irq.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
 
@@ -188,11 +189,19 @@ static struct spi_board_info pca100_spi_board_info[] __initdata = {
 	},
 };
 
-static int pca100_spi_cs[] = {SPI1_SS0, SPI1_SS1};
-
-static const struct spi_imx_master pca100_spi0_data __initconst = {
-	.chipselect	= pca100_spi_cs,
-	.num_chipselect = ARRAY_SIZE(pca100_spi_cs),
+static struct gpiod_lookup_table pca100_spi0_gpiod_table = {
+	.dev_id = "imx27-cspi.0", /* Actual device name for spi0 */
+	.table = {
+		/*
+		 * The i.MX27 has the i.MX21 GPIO controller, port D is
+		 * bank 3 and thus named "imx21-gpio.3".
+		 * SPI1_SS0 is GPIO_PORTD + 28
+		 * SPI1_SS1 is GPIO_PORTD + 27
+		 */
+		GPIO_LOOKUP_IDX("imx21-gpio.3", 28, "cs", 0, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("imx21-gpio.3", 27, "cs", 1, GPIO_ACTIVE_LOW),
+		{ },
+	},
 };
 
 static void pca100_ac97_warm_reset(struct snd_ac97 *ac97)
@@ -362,7 +371,7 @@ static void __init pca100_init(void)
 	mxc_gpio_mode(GPIO_PORTD | 27 | GPIO_GPIO | GPIO_IN);
 	spi_register_board_info(pca100_spi_board_info,
 				ARRAY_SIZE(pca100_spi_board_info));
-	imx27_add_spi_imx0(&pca100_spi0_data);
+	imx27_add_spi_imx0(&pca100_spi0_gpiod_table);
 
 	imx27_add_imx_fb(&pca100_fb_data);
 
diff --git a/arch/arm/mach-imx/mach-pcm037_eet.c b/arch/arm/mach-imx/mach-pcm037_eet.c
index 51f5142920cf..8b0e03a595c1 100644
--- a/arch/arm/mach-imx/mach-pcm037_eet.c
+++ b/arch/arm/mach-imx/mach-pcm037_eet.c
@@ -52,11 +52,6 @@ static struct spi_board_info pcm037_spi_dev[] = {
 	},
 };
 
-/* Platform Data for MXC CSPI */
-static const struct spi_imx_master pcm037_spi1_pdata __initconst = {
-	.num_chipselect = 2,
-};
-
 /* GPIO-keys input device */
 static struct gpio_keys_button pcm037_gpio_keys[] = {
 	{
@@ -163,7 +158,7 @@ int __init pcm037_eet_init_devices(void)
 
 	/* SPI */
 	spi_register_board_info(pcm037_spi_dev, ARRAY_SIZE(pcm037_spi_dev));
-	imx31_add_spi_imx0(&pcm037_spi1_pdata);
+	imx31_add_spi_imx0(NULL);
 
 	imx_add_gpio_keys(&pcm037_gpio_keys_platform_data);
 
diff --git a/arch/arm/mach-imx/mm-imx21.c b/arch/arm/mach-imx/mm-imx21.c
index 50a2edac8513..b834026e4615 100644
--- a/arch/arm/mach-imx/mm-imx21.c
+++ b/arch/arm/mach-imx/mm-imx21.c
@@ -78,8 +78,7 @@ void __init imx21_soc_init(void)
 	mxc_register_gpio("imx21-gpio", 5, MX21_GPIO6_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
 
 	pinctrl_provide_dummies();
-	imx_add_imx_dma("imx21-dma", MX21_DMA_BASE_ADDR,
-			MX21_INT_DMACH0, 0); /* No ERR irq */
+	imx_add_imx_dma("imx21-dma", MX21_DMA_BASE_ADDR, MX21_INT_DMACH0);
 	platform_device_register_simple("imx21-audmux", 0, imx21_audmux_res,
 					ARRAY_SIZE(imx21_audmux_res));
 }
diff --git a/arch/arm/mach-imx/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c
index 4e4125140025..2717614f101d 100644
--- a/arch/arm/mach-imx/mm-imx27.c
+++ b/arch/arm/mach-imx/mm-imx27.c
@@ -79,8 +79,7 @@ void __init imx27_soc_init(void)
 	mxc_register_gpio("imx21-gpio", 5, MX27_GPIO6_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
 
 	pinctrl_provide_dummies();
-	imx_add_imx_dma("imx27-dma", MX27_DMA_BASE_ADDR,
-			MX27_INT_DMACH0, 0); /* No ERR irq */
+	imx_add_imx_dma("imx27-dma", MX27_DMA_BASE_ADDR, MX27_INT_DMACH0);
 	/* imx27 has the imx21 type audmux */
 	platform_device_register_simple("imx21-audmux", 0, imx27_audmux_res,
 					ARRAY_SIZE(imx27_audmux_res));
diff --git a/arch/arm/mach-imx/pm-imx5.c b/arch/arm/mach-imx/pm-imx5.c
index f057df813f83..e9962b48e30c 100644
--- a/arch/arm/mach-imx/pm-imx5.c
+++ b/arch/arm/mach-imx/pm-imx5.c
@@ -295,14 +295,14 @@ static int __init imx_suspend_alloc_ocram(
 	if (!ocram_pool) {
 		pr_warn("%s: ocram pool unavailable!\n", __func__);
 		ret = -ENODEV;
-		goto put_node;
+		goto put_device;
 	}
 
 	ocram_base = gen_pool_alloc(ocram_pool, size);
 	if (!ocram_base) {
 		pr_warn("%s: unable to alloc ocram!\n", __func__);
 		ret = -ENOMEM;
-		goto put_node;
+		goto put_device;
 	}
 
 	phys = gen_pool_virt_to_phys(ocram_pool, ocram_base);
@@ -312,6 +312,8 @@ static int __init imx_suspend_alloc_ocram(
 	if (virt_out)
 		*virt_out = virt;
 
+put_device:
+	put_device(&pdev->dev);
 put_node:
 	of_node_put(node);
 
diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c
index dd34dff13762..40c74b4c4d73 100644
--- a/arch/arm/mach-imx/pm-imx6.c
+++ b/arch/arm/mach-imx/pm-imx6.c
@@ -493,14 +493,14 @@ static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata)
 	if (!ocram_pool) {
 		pr_warn("%s: ocram pool unavailable!\n", __func__);
 		ret = -ENODEV;
-		goto put_node;
+		goto put_device;
 	}
 
 	ocram_base = gen_pool_alloc(ocram_pool, MX6Q_SUSPEND_OCRAM_SIZE);
 	if (!ocram_base) {
 		pr_warn("%s: unable to alloc ocram!\n", __func__);
 		ret = -ENOMEM;
-		goto put_node;
+		goto put_device;
 	}
 
 	ocram_pbase = gen_pool_virt_to_phys(ocram_pool, ocram_base);
@@ -523,7 +523,7 @@ static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata)
 	ret = imx6_pm_get_base(&pm_info->mmdc_base, socdata->mmdc_compat);
 	if (ret) {
 		pr_warn("%s: failed to get mmdc base %d!\n", __func__, ret);
-		goto put_node;
+		goto put_device;
 	}
 
 	ret = imx6_pm_get_base(&pm_info->src_base, socdata->src_compat);
@@ -570,7 +570,7 @@ static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata)
 		&imx6_suspend,
 		MX6Q_SUSPEND_OCRAM_SIZE - sizeof(*pm_info));
 
-	goto put_node;
+	goto put_device;
 
 pl310_cache_map_failed:
 	iounmap(pm_info->gpc_base.vbase);
@@ -580,6 +580,8 @@ iomuxc_map_failed:
 	iounmap(pm_info->src_base.vbase);
 src_map_failed:
 	iounmap(pm_info->mmdc_base.vbase);
+put_device:
+	put_device(&pdev->dev);
 put_node:
 	of_node_put(node);
 
diff --git a/arch/arm/mach-mstar/Kconfig b/arch/arm/mach-mstar/Kconfig
new file mode 100644
index 000000000000..52744fe32368
--- /dev/null
+++ b/arch/arm/mach-mstar/Kconfig
@@ -0,0 +1,26 @@
+menuconfig ARCH_MSTARV7
+	bool "MStar/Sigmastar Armv7 SoC Support"
+	depends on ARCH_MULTI_V7
+	select ARM_GIC
+	select ARM_HEAVY_MB
+	help
+	  Support for newer MStar/Sigmastar SoC families that are
+	  based on Armv7 cores like the Cortex A7 and share the same
+	  basic hardware like the infinity and mercury series.
+
+if ARCH_MSTARV7
+
+config MACH_INFINITY
+	bool "MStar/Sigmastar infinity SoC support"
+	default ARCH_MSTARV7
+	help
+	  Support for MStar/Sigmastar infinity IP camera SoCs.
+
+config MACH_MERCURY
+	bool "MStar/Sigmastar mercury SoC support"
+	default ARCH_MSTARV7
+	help
+	  Support for MStar/Sigmastar mercury dash camera SoCs.
+	  Note that older Mercury2 SoCs are ARM9 based and not supported.
+
+endif
diff --git a/arch/arm/mach-mstar/Makefile b/arch/arm/mach-mstar/Makefile
new file mode 100644
index 000000000000..93b0391ede7e
--- /dev/null
+++ b/arch/arm/mach-mstar/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_ARCH_MSTARV7) += mstarv7.o
diff --git a/arch/arm/mach-mstar/mstarv7.c b/arch/arm/mach-mstar/mstarv7.c
new file mode 100644
index 000000000000..81a4cbcab206
--- /dev/null
+++ b/arch/arm/mach-mstar/mstarv7.c
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree support for MStar/Sigmastar Armv7 SoCs
+ *
+ * Copyright (c) 2020 thingy.jp
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ */
+
+#include <linux/init.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/io.h>
+
+/*
+ * In the u-boot code the area these registers are in is
+ * called "L3 bridge" and there are register descriptions
+ * for something in the same area called "AXI".
+ *
+ * It's not exactly known what this is but the vendor code
+ * for both u-boot and linux share calls to "flush the miu pipe".
+ * This seems to be to force pending CPU writes to memory so that
+ * the state is right before DMA capable devices try to read
+ * descriptors and data the CPU has prepared. Without doing this
+ * ethernet doesn't work reliably for example.
+ */
+
+#define MSTARV7_L3BRIDGE_FLUSH		0x14
+#define MSTARV7_L3BRIDGE_STATUS		0x40
+#define MSTARV7_L3BRIDGE_FLUSH_TRIGGER	BIT(0)
+#define MSTARV7_L3BRIDGE_STATUS_DONE	BIT(12)
+
+static void __iomem *l3bridge;
+
+static const char * const mstarv7_board_dt_compat[] __initconst = {
+	"mstar,infinity",
+	"mstar,infinity3",
+	"mstar,mercury5",
+	NULL,
+};
+
+/*
+ * This may need locking to deal with situations where an interrupt
+ * happens while we are in here and mb() gets called by the interrupt handler.
+ *
+ * The vendor code did have a spin lock but it doesn't seem to be needed and
+ * removing it hasn't caused any side effects so far.
+ *
+ * [writel|readl]_relaxed have to be used here because otherwise
+ * we'd end up right back in here.
+ */
+static void mstarv7_mb(void)
+{
+	/* toggle the flush miu pipe fire bit */
+	writel_relaxed(0, l3bridge + MSTARV7_L3BRIDGE_FLUSH);
+	writel_relaxed(MSTARV7_L3BRIDGE_FLUSH_TRIGGER, l3bridge
+			+ MSTARV7_L3BRIDGE_FLUSH);
+	while (!(readl_relaxed(l3bridge + MSTARV7_L3BRIDGE_STATUS)
+			& MSTARV7_L3BRIDGE_STATUS_DONE)) {
+		/* wait for flush to complete */
+	}
+}
+
+static void __init mstarv7_init(void)
+{
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "mstar,l3bridge");
+	l3bridge = of_iomap(np, 0);
+	if (l3bridge)
+		soc_mb = mstarv7_mb;
+	else
+		pr_warn("Failed to install memory barrier, DMA will be broken!\n");
+}
+
+DT_MACHINE_START(MSTARV7_DT, "MStar/Sigmastar Armv7 (Device Tree)")
+	.dt_compat	= mstarv7_board_dt_compat,
+	.init_machine	= mstarv7_init,
+MACHINE_END
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index 948da556162e..9536b8f3c07d 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -146,7 +146,7 @@ config MACH_SX1
 	  Support for the Siemens SX1 phone. To boot the kernel,
 	  you'll need a SX1 compatible bootloader; check out
 	  http://forum.oslik.ru and
-	  http://www.handhelds.org/moin/moin.cgi/SiemensSX1
+	  https://www.handhelds.org/moin/moin.cgi/SiemensSX1
 	  for more information.
 	  Say Y here if you have such a phone, say NO otherwise.
 
diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c
index 0ad8bdc2ed61..2bf659fb6099 100644
--- a/arch/arm/mach-omap1/dma.c
+++ b/arch/arm/mach-omap1/dma.c
@@ -10,7 +10,7 @@
  * OMAP2/3 support Copyright (C) 2004-2007 Texas Instruments, Inc.
  * Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc.
  *
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2010 Texas Instruments Incorporated - https://www.ti.com/
  * Converted DMA library into platform driver
  *                   - G, Manjunath Kondaiah <manjugk@ti.com>
  */
diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c
index 312a0924d786..3ec08bd5d8a0 100644
--- a/arch/arm/mach-omap1/gpio15xx.c
+++ b/arch/arm/mach-omap1/gpio15xx.c
@@ -1,7 +1,7 @@
 /*
  * OMAP15xx specific gpio init
  *
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2010 Texas Instruments Incorporated - https://www.ti.com/
  *
  * Author:
  *	Charulatha V <charu@ti.com>
diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c
index 5b7a29b294d4..500cfd416c42 100644
--- a/arch/arm/mach-omap1/gpio16xx.c
+++ b/arch/arm/mach-omap1/gpio16xx.c
@@ -1,7 +1,7 @@
 /*
  * OMAP16xx specific gpio init
  *
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2010 Texas Instruments Incorporated - https://www.ti.com/
  *
  * Author:
  *	Charulatha V <charu@ti.com>
diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c
index 0e5f68de23bf..aeb81c18ffcc 100644
--- a/arch/arm/mach-omap1/gpio7xx.c
+++ b/arch/arm/mach-omap1/gpio7xx.c
@@ -1,7 +1,7 @@
 /*
  * OMAP7xx specific gpio init
  *
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2010 Texas Instruments Incorporated - https://www.ti.com/
  *
  * Author:
  *	Charulatha V <charu@ti.com>
diff --git a/arch/arm/mach-omap1/timer.c b/arch/arm/mach-omap1/timer.c
index 4447210c9b0d..97fc2096b970 100644
--- a/arch/arm/mach-omap1/timer.c
+++ b/arch/arm/mach-omap1/timer.c
@@ -6,7 +6,7 @@
  * device model. It also has a low level function to change the timer
  * input clock source.
  *
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
  * Tarun Kanti DebBarma <tarun.kanti@ti.com>
  * Thara Gopinath <thara@ti.com>
  *
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 188ea5258c99..1d119b974f5f 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -775,19 +775,23 @@ static const char * __init omap_get_family(void)
 		return kasprintf(GFP_KERNEL, "Unknown");
 }
 
-static ssize_t omap_get_type(struct device *dev,
-					struct device_attribute *attr,
-					char *buf)
+static ssize_t
+type_show(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	return sprintf(buf, "%s\n", omap_types[omap_type()]);
 }
 
-static struct device_attribute omap_soc_attr =
-	__ATTR(type,  S_IRUGO, omap_get_type,  NULL);
+static DEVICE_ATTR_RO(type);
+
+static struct attribute *omap_soc_attrs[] = {
+	&dev_attr_type.attr,
+	NULL
+};
+
+ATTRIBUTE_GROUPS(omap_soc);
 
 void __init omap_soc_device_init(void)
 {
-	struct device *parent;
 	struct soc_device *soc_dev;
 	struct soc_device_attribute *soc_dev_attr;
 
@@ -798,14 +802,12 @@ void __init omap_soc_device_init(void)
 	soc_dev_attr->machine  = soc_name;
 	soc_dev_attr->family   = omap_get_family();
 	soc_dev_attr->revision = soc_rev;
+	soc_dev_attr->custom_attr_group = omap_soc_groups[0];
 
 	soc_dev = soc_device_register(soc_dev_attr);
 	if (IS_ERR(soc_dev)) {
 		kfree(soc_dev_attr);
 		return;
 	}
-
-	parent = soc_device_to_device(soc_dev);
-	device_create_file(parent, &omap_soc_attr);
 }
 #endif /* CONFIG_SOC_BUS */
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 82706af307de..15b29a179c8a 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -3435,7 +3435,7 @@ static int omap_hwmod_allocate_module(struct device *dev, struct omap_hwmod *oh,
 		regs = ioremap(data->module_pa,
 			       data->module_size);
 		if (!regs)
-			return -ENOMEM;
+			goto out_free_sysc;
 	}
 
 	/*
@@ -3445,13 +3445,13 @@ static int omap_hwmod_allocate_module(struct device *dev, struct omap_hwmod *oh,
 	if (oh->class->name && strcmp(oh->class->name, data->name)) {
 		class = kmemdup(oh->class, sizeof(*oh->class), GFP_KERNEL);
 		if (!class)
-			return -ENOMEM;
+			goto out_unmap;
 	}
 
 	if (list_empty(&oh->slave_ports)) {
 		oi = kcalloc(1, sizeof(*oi), GFP_KERNEL);
 		if (!oi)
-			return -ENOMEM;
+			goto out_free_class;
 
 		/*
 		 * Note that we assume interconnect interface clocks will be
@@ -3478,6 +3478,14 @@ static int omap_hwmod_allocate_module(struct device *dev, struct omap_hwmod *oh,
 	spin_unlock_irqrestore(&oh->_lock, flags);
 
 	return 0;
+
+out_free_class:
+	kfree(class);
+out_unmap:
+	iounmap(regs);
+out_free_sysc:
+	kfree(sysc);
+	return -ENOMEM;
 }
 
 static const struct omap_hwmod_reset omap24xx_reset_quirks[] = {
@@ -3489,7 +3497,7 @@ static const struct omap_hwmod_reset dra7_reset_quirks[] = {
 };
 
 static const struct omap_hwmod_reset omap_reset_quirks[] = {
-	{ .match = "dss", .len = 3, .reset = omap_dss_reset, },
+	{ .match = "dss_core", .len = 8, .reset = omap_dss_reset, },
 	{ .match = "hdq1w", .len = 5, .reset = omap_hdq1w_reset, },
 	{ .match = "i2c", .len = 3, .reset = omap_i2c_reset, },
 	{ .match = "wd_timer", .len = 8, .reset = omap2_wd_timer_reset, },
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index ca02f91237e3..b6c7d98a9eff 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -2342,44 +2342,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__sham = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l4_core -> AES */
-static struct omap_hwmod_class_sysconfig omap3_aes_sysc = {
-	.rev_offs	= 0x44,
-	.sysc_offs	= 0x48,
-	.syss_offs	= 0x4c,
-	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
-			   SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap3xxx_aes_sysc_fields,
-};
-
-static struct omap_hwmod_class omap3xxx_aes_class = {
-	.name	= "aes",
-	.sysc	= &omap3_aes_sysc,
-};
-
-
-static struct omap_hwmod omap3xxx_aes_hwmod = {
-	.name		= "aes",
-	.main_clk	= "aes2_ick",
-	.prcm		= {
-		.omap2 = {
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_ST_AES2_SHIFT,
-		},
-	},
-	.class		= &omap3xxx_aes_class,
-};
-
-
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__aes = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap3xxx_aes_hwmod,
-	.clk		= "aes2_ick",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /*
  * 'ssi' class
  * synchronous serial interface (multichannel and full-duplex serial if)
@@ -2473,20 +2435,11 @@ static struct omap_hwmod_ocp_if *omap34xx_sham_hwmod_ocp_ifs[] __initdata = {
 	NULL,
 };
 
-static struct omap_hwmod_ocp_if *omap34xx_aes_hwmod_ocp_ifs[] __initdata = {
-	&omap3xxx_l4_core__aes,
-	NULL,
-};
-
 static struct omap_hwmod_ocp_if *omap36xx_sham_hwmod_ocp_ifs[] __initdata = {
 	&omap3xxx_l4_core__sham,
 	NULL
 };
 
-static struct omap_hwmod_ocp_if *omap36xx_aes_hwmod_ocp_ifs[] __initdata = {
-	&omap3xxx_l4_core__aes,
-	NULL
-};
 
 /*
  * Apparently the SHA/MD5 and AES accelerator IP blocks are
@@ -2501,11 +2454,6 @@ static struct omap_hwmod_ocp_if *am35xx_sham_hwmod_ocp_ifs[] __initdata = {
 	NULL
 };
 
-static struct omap_hwmod_ocp_if *am35xx_aes_hwmod_ocp_ifs[] __initdata = {
-	/* &omap3xxx_l4_core__aes, */
-	NULL,
-};
-
 /* 3430ES1-only hwmod links */
 static struct omap_hwmod_ocp_if *omap3430es1_hwmod_ocp_ifs[] __initdata = {
 	&omap3430es1_dss__l3,
@@ -2641,7 +2589,6 @@ int __init omap3xxx_hwmod_init(void)
 {
 	int r;
 	struct omap_hwmod_ocp_if **h = NULL, **h_sham = NULL;
-	struct omap_hwmod_ocp_if **h_aes = NULL;
 	struct device_node *bus;
 	unsigned int rev;
 
@@ -2664,16 +2611,13 @@ int __init omap3xxx_hwmod_init(void)
 	    rev == OMAP3430_REV_ES3_1 || rev == OMAP3430_REV_ES3_1_2) {
 		h = omap34xx_hwmod_ocp_ifs;
 		h_sham = omap34xx_sham_hwmod_ocp_ifs;
-		h_aes = omap34xx_aes_hwmod_ocp_ifs;
 	} else if (rev == AM35XX_REV_ES1_0 || rev == AM35XX_REV_ES1_1) {
 		h = am35xx_hwmod_ocp_ifs;
 		h_sham = am35xx_sham_hwmod_ocp_ifs;
-		h_aes = am35xx_aes_hwmod_ocp_ifs;
 	} else if (rev == OMAP3630_REV_ES1_0 || rev == OMAP3630_REV_ES1_1 ||
 		   rev == OMAP3630_REV_ES1_2) {
 		h = omap36xx_hwmod_ocp_ifs;
 		h_sham = omap36xx_sham_hwmod_ocp_ifs;
-		h_aes = omap36xx_aes_hwmod_ocp_ifs;
 	} else {
 		WARN(1, "OMAP3 hwmod family init: unknown chip type\n");
 		return -EINVAL;
@@ -2696,11 +2640,6 @@ int __init omap3xxx_hwmod_init(void)
 			goto put_node;
 	}
 
-	if (h_aes && omap3xxx_hwmod_is_hs_ip_block_usable(bus, "aes")) {
-		r = omap_hwmod_register_links(h_aes);
-		if (r < 0)
-			goto put_node;
-	}
 	of_node_put(bus);
 
 	/*
diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
index 3f338732ee6c..b88d12de68a2 100644
--- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
@@ -85,49 +85,6 @@ static struct omap_hwmod am43xx_control_hwmod = {
 	},
 };
 
-static struct omap_hwmod_class_sysconfig am43xx_usb_otg_ss_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.sysc_flags	= (SYSC_HAS_DMADISABLE | SYSC_HAS_MIDLEMODE |
-				SYSC_HAS_SIDLEMODE),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-				SIDLE_SMART_WKUP | MSTANDBY_FORCE |
-				MSTANDBY_NO | MSTANDBY_SMART |
-				MSTANDBY_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class am43xx_usb_otg_ss_hwmod_class = {
-	.name	= "usb_otg_ss",
-	.sysc	= &am43xx_usb_otg_ss_sysc,
-};
-
-static struct omap_hwmod am43xx_usb_otg_ss0_hwmod = {
-	.name		= "usb_otg_ss0",
-	.class		= &am43xx_usb_otg_ss_hwmod_class,
-	.clkdm_name	= "l3s_clkdm",
-	.main_clk	= "l3s_gclk",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs	= AM43XX_CM_PER_USB_OTG_SS0_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod am43xx_usb_otg_ss1_hwmod = {
-	.name		= "usb_otg_ss1",
-	.class		= &am43xx_usb_otg_ss_hwmod_class,
-	.clkdm_name	= "l3s_clkdm",
-	.main_clk	= "l3s_gclk",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs	= AM43XX_CM_PER_USB_OTG_SS1_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
 /* Interfaces */
 static struct omap_hwmod_ocp_if am43xx_l3_main__emif = {
 	.master		= &am33xx_l3_main_hwmod,
@@ -178,20 +135,6 @@ static struct omap_hwmod_ocp_if am43xx_l4_wkup__control = {
 	.user		= OCP_USER_MPU,
 };
 
-static struct omap_hwmod_ocp_if am43xx_l3_s__usbotgss0 = {
-	.master         = &am33xx_l3_s_hwmod,
-	.slave          = &am43xx_usb_otg_ss0_hwmod,
-	.clk            = "l3s_gclk",
-	.user           = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_ocp_if am43xx_l3_s__usbotgss1 = {
-	.master         = &am33xx_l3_s_hwmod,
-	.slave          = &am43xx_usb_otg_ss1_hwmod,
-	.clk            = "l3s_gclk",
-	.user           = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
 	&am33xx_mpu__l3_main,
 	&am33xx_mpu__prcm,
@@ -211,8 +154,6 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
 	&am43xx_l4_wkup__smartreflex1,
 	&am33xx_l3_s__gpmc,
 	&am33xx_l3_main__ocmc,
-	&am43xx_l3_s__usbotgss0,
-	&am43xx_l3_s__usbotgss1,
 	NULL,
 };
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index de13c46b984f..665ca74a834a 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -640,154 +640,6 @@ static struct omap_hwmod omap44xx_sl2if_hwmod = {
 };
 
 /*
- * 'usb_host_fs' class
- * full-speed usb host controller
- */
-
-/* The IP is not compliant to type1 / type2 scheme */
-static struct omap_hwmod_class_sysconfig omap44xx_usb_host_fs_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0210,
-	.sysc_flags	= (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_SOFTRESET),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type_usb_host_fs,
-};
-
-static struct omap_hwmod_class omap44xx_usb_host_fs_hwmod_class = {
-	.name	= "usb_host_fs",
-	.sysc	= &omap44xx_usb_host_fs_sysc,
-};
-
-/* usb_host_fs */
-static struct omap_hwmod omap44xx_usb_host_fs_hwmod = {
-	.name		= "usb_host_fs",
-	.class		= &omap44xx_usb_host_fs_hwmod_class,
-	.clkdm_name	= "l3_init_clkdm",
-	.main_clk	= "usb_host_fs_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L3INIT_USB_HOST_FS_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L3INIT_USB_HOST_FS_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/*
- * 'usb_host_hs' class
- * high-speed multi-port usb host controller
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_usb_host_hs_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_SOFTRESET | SYSC_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
-			   MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class omap44xx_usb_host_hs_hwmod_class = {
-	.name	= "usb_host_hs",
-	.sysc	= &omap44xx_usb_host_hs_sysc,
-};
-
-/* usb_host_hs */
-static struct omap_hwmod omap44xx_usb_host_hs_hwmod = {
-	.name		= "usb_host_hs",
-	.class		= &omap44xx_usb_host_hs_hwmod_class,
-	.clkdm_name	= "l3_init_clkdm",
-	.main_clk	= "usb_host_hs_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L3INIT_USB_HOST_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L3INIT_USB_HOST_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-
-	/*
-	 * Errata: USBHOST Configured In Smart-Idle Can Lead To a Deadlock
-	 * id: i660
-	 *
-	 * Description:
-	 * In the following configuration :
-	 * - USBHOST module is set to smart-idle mode
-	 * - PRCM asserts idle_req to the USBHOST module ( This typically
-	 *   happens when the system is going to a low power mode : all ports
-	 *   have been suspended, the master part of the USBHOST module has
-	 *   entered the standby state, and SW has cut the functional clocks)
-	 * - an USBHOST interrupt occurs before the module is able to answer
-	 *   idle_ack, typically a remote wakeup IRQ.
-	 * Then the USB HOST module will enter a deadlock situation where it
-	 * is no more accessible nor functional.
-	 *
-	 * Workaround:
-	 * Don't use smart idle; use only force idle, hence HWMOD_SWSUP_SIDLE
-	 */
-
-	/*
-	 * Errata: USB host EHCI may stall when entering smart-standby mode
-	 * Id: i571
-	 *
-	 * Description:
-	 * When the USBHOST module is set to smart-standby mode, and when it is
-	 * ready to enter the standby state (i.e. all ports are suspended and
-	 * all attached devices are in suspend mode), then it can wrongly assert
-	 * the Mstandby signal too early while there are still some residual OCP
-	 * transactions ongoing. If this condition occurs, the internal state
-	 * machine may go to an undefined state and the USB link may be stuck
-	 * upon the next resume.
-	 *
-	 * Workaround:
-	 * Don't use smart standby; use only force standby,
-	 * hence HWMOD_SWSUP_MSTANDBY
-	 */
-
-	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
-};
-
-/*
- * 'usb_tll_hs' class
- * usb_tll_hs module is the adapter on the usb_host_hs ports
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_usb_tll_hs_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
-			   SYSC_HAS_AUTOIDLE),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap44xx_usb_tll_hs_hwmod_class = {
-	.name	= "usb_tll_hs",
-	.sysc	= &omap44xx_usb_tll_hs_sysc,
-};
-
-static struct omap_hwmod omap44xx_usb_tll_hs_hwmod = {
-	.name		= "usb_tll_hs",
-	.class		= &omap44xx_usb_tll_hs_hwmod_class,
-	.clkdm_name	= "l3_init_clkdm",
-	.main_clk	= "usb_tll_hs_ick",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L3INIT_USB_TLL_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L3INIT_USB_TLL_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-};
-
-/*
  * interfaces
  */
 
@@ -895,22 +747,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_2 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* usb_host_fs -> l3_main_2 */
-static struct omap_hwmod_ocp_if __maybe_unused omap44xx_usb_host_fs__l3_main_2 = {
-	.master		= &omap44xx_usb_host_fs_hwmod,
-	.slave		= &omap44xx_l3_main_2_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* usb_host_hs -> l3_main_2 */
-static struct omap_hwmod_ocp_if omap44xx_usb_host_hs__l3_main_2 = {
-	.master		= &omap44xx_usb_host_hs_hwmod,
-	.slave		= &omap44xx_l3_main_2_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* l3_main_1 -> l3_main_3 */
 static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l3_main_3 = {
 	.master		= &omap44xx_l3_main_1_hwmod,
@@ -1119,30 +955,6 @@ static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l3_main_2__sl2if = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l4_cfg -> usb_host_fs */
-static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l4_cfg__usb_host_fs = {
-	.master		= &omap44xx_l4_cfg_hwmod,
-	.slave		= &omap44xx_usb_host_fs_hwmod,
-	.clk		= "l4_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> usb_host_hs */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_host_hs = {
-	.master		= &omap44xx_l4_cfg_hwmod,
-	.slave		= &omap44xx_usb_host_hs_hwmod,
-	.clk		= "l4_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> usb_tll_hs */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_tll_hs = {
-	.master		= &omap44xx_l4_cfg_hwmod,
-	.slave		= &omap44xx_usb_tll_hs_hwmod,
-	.clk		= "l4_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* mpu -> emif1 */
 static struct omap_hwmod_ocp_if omap44xx_mpu__emif1 = {
 	.master		= &omap44xx_mpu_hwmod,
@@ -1173,8 +985,6 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
 	&omap44xx_iva__l3_main_2,
 	&omap44xx_l3_main_1__l3_main_2,
 	&omap44xx_l4_cfg__l3_main_2,
-	/* &omap44xx_usb_host_fs__l3_main_2, */
-	&omap44xx_usb_host_hs__l3_main_2,
 	&omap44xx_l3_main_1__l3_main_3,
 	&omap44xx_l3_main_2__l3_main_3,
 	&omap44xx_l4_cfg__l3_main_3,
@@ -1201,9 +1011,6 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
 	&omap44xx_l4_wkup__prm,
 	&omap44xx_l4_wkup__scrm,
 	/* &omap44xx_l3_main_2__sl2if, */
-	/* &omap44xx_l4_cfg__usb_host_fs, */
-	&omap44xx_l4_cfg__usb_host_hs,
-	&omap44xx_l4_cfg__usb_tll_hs,
 	&omap44xx_mpu__emif1,
 	&omap44xx_mpu__emif2,
 	NULL,
diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
index 4cb194ac7a7e..7c38c1ba58ac 100644
--- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
@@ -267,158 +267,6 @@ static struct omap_hwmod omap54xx_mpu_hwmod = {
 };
 
 /*
- * 'usb_host_hs' class
- * high-speed multi-port usb host controller
- */
-
-static struct omap_hwmod_class_sysconfig omap54xx_usb_host_hs_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.sysc_flags	= (SYSC_HAS_MIDLEMODE | SYSC_HAS_RESET_STATUS |
-			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
-			   MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class omap54xx_usb_host_hs_hwmod_class = {
-	.name	= "usb_host_hs",
-	.sysc	= &omap54xx_usb_host_hs_sysc,
-};
-
-static struct omap_hwmod omap54xx_usb_host_hs_hwmod = {
-	.name		= "usb_host_hs",
-	.class		= &omap54xx_usb_host_hs_hwmod_class,
-	.clkdm_name	= "l3init_clkdm",
-	/*
-	 * Errata: USBHOST Configured In Smart-Idle Can Lead To a Deadlock
-	 * id: i660
-	 *
-	 * Description:
-	 * In the following configuration :
-	 * - USBHOST module is set to smart-idle mode
-	 * - PRCM asserts idle_req to the USBHOST module ( This typically
-	 *   happens when the system is going to a low power mode : all ports
-	 *   have been suspended, the master part of the USBHOST module has
-	 *   entered the standby state, and SW has cut the functional clocks)
-	 * - an USBHOST interrupt occurs before the module is able to answer
-	 *   idle_ack, typically a remote wakeup IRQ.
-	 * Then the USB HOST module will enter a deadlock situation where it
-	 * is no more accessible nor functional.
-	 *
-	 * Workaround:
-	 * Don't use smart idle; use only force idle, hence HWMOD_SWSUP_SIDLE
-	 */
-
-	/*
-	 * Errata: USB host EHCI may stall when entering smart-standby mode
-	 * Id: i571
-	 *
-	 * Description:
-	 * When the USBHOST module is set to smart-standby mode, and when it is
-	 * ready to enter the standby state (i.e. all ports are suspended and
-	 * all attached devices are in suspend mode), then it can wrongly assert
-	 * the Mstandby signal too early while there are still some residual OCP
-	 * transactions ongoing. If this condition occurs, the internal state
-	 * machine may go to an undefined state and the USB link may be stuck
-	 * upon the next resume.
-	 *
-	 * Workaround:
-	 * Don't use smart standby; use only force standby,
-	 * hence HWMOD_SWSUP_MSTANDBY
-	 */
-
-	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
-	.main_clk	= "l3init_60m_fclk",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP54XX_CM_L3INIT_USB_HOST_HS_CLKCTRL_OFFSET,
-			.context_offs = OMAP54XX_RM_L3INIT_USB_HOST_HS_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/*
- * 'usb_tll_hs' class
- * usb_tll_hs module is the adapter on the usb_host_hs ports
- */
-
-static struct omap_hwmod_class_sysconfig omap54xx_usb_tll_hs_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
-			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap54xx_usb_tll_hs_hwmod_class = {
-	.name	= "usb_tll_hs",
-	.sysc	= &omap54xx_usb_tll_hs_sysc,
-};
-
-static struct omap_hwmod omap54xx_usb_tll_hs_hwmod = {
-	.name		= "usb_tll_hs",
-	.class		= &omap54xx_usb_tll_hs_hwmod_class,
-	.clkdm_name	= "l3init_clkdm",
-	.main_clk	= "l4_root_clk_div",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP54XX_CM_L3INIT_USB_TLL_HS_CLKCTRL_OFFSET,
-			.context_offs = OMAP54XX_RM_L3INIT_USB_TLL_HS_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-};
-
-/*
- * 'usb_otg_ss' class
- * 2.0 super speed (usb_otg_ss) controller
- */
-
-static struct omap_hwmod_class_sysconfig omap54xx_usb_otg_ss_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.sysc_flags	= (SYSC_HAS_DMADISABLE | SYSC_HAS_MIDLEMODE |
-			   SYSC_HAS_SIDLEMODE),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
-			   MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class omap54xx_usb_otg_ss_hwmod_class = {
-	.name	= "usb_otg_ss",
-	.sysc	= &omap54xx_usb_otg_ss_sysc,
-};
-
-/* usb_otg_ss */
-static struct omap_hwmod_opt_clk usb_otg_ss_opt_clks[] = {
-	{ .role = "refclk960m", .clk = "usb_otg_ss_refclk960m" },
-};
-
-static struct omap_hwmod omap54xx_usb_otg_ss_hwmod = {
-	.name		= "usb_otg_ss",
-	.class		= &omap54xx_usb_otg_ss_hwmod_class,
-	.clkdm_name	= "l3init_clkdm",
-	.flags		= HWMOD_SWSUP_SIDLE,
-	.main_clk	= "dpll_core_h13x2_ck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP54XX_CM_L3INIT_USB_OTG_SS_CLKCTRL_OFFSET,
-			.context_offs = OMAP54XX_RM_L3INIT_USB_OTG_SS_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-	.opt_clks	= usb_otg_ss_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(usb_otg_ss_opt_clks),
-};
-
-/*
  * 'sata' class
  * sata:  serial ata interface  gen2 compliant   ( 1 rx/ 1 tx)
  */
@@ -619,30 +467,6 @@ static struct omap_hwmod_ocp_if omap54xx_l4_cfg__mpu = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l4_cfg -> usb_host_hs */
-static struct omap_hwmod_ocp_if omap54xx_l4_cfg__usb_host_hs = {
-	.master		= &omap54xx_l4_cfg_hwmod,
-	.slave		= &omap54xx_usb_host_hs_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> usb_tll_hs */
-static struct omap_hwmod_ocp_if omap54xx_l4_cfg__usb_tll_hs = {
-	.master		= &omap54xx_l4_cfg_hwmod,
-	.slave		= &omap54xx_usb_tll_hs_hwmod,
-	.clk		= "l4_root_clk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> usb_otg_ss */
-static struct omap_hwmod_ocp_if omap54xx_l4_cfg__usb_otg_ss = {
-	.master		= &omap54xx_l4_cfg_hwmod,
-	.slave		= &omap54xx_usb_otg_ss_hwmod,
-	.clk		= "dpll_core_h13x2_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = {
 	&omap54xx_l3_main_1__dmm,
 	&omap54xx_l3_main_3__l3_instr,
@@ -663,9 +487,6 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = {
 	&omap54xx_mpu__emif1,
 	&omap54xx_mpu__emif2,
 	&omap54xx_l4_cfg__mpu,
-	&omap54xx_l4_cfg__usb_host_hs,
-	&omap54xx_l4_cfg__usb_tll_hs,
-	&omap54xx_l4_cfg__usb_otg_ss,
 	&omap54xx_l4_cfg__sata,
 	NULL,
 };
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index 07b7458deae4..adb07848de96 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -492,101 +492,6 @@ static struct omap_hwmod dra7xx_sata_hwmod = {
 };
 
 /*
- * 'usb_otg_ss' class
- *
- */
-
-static struct omap_hwmod_class_sysconfig dra7xx_usb_otg_ss_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.sysc_flags	= (SYSC_HAS_DMADISABLE | SYSC_HAS_MIDLEMODE |
-			   SYSC_HAS_SIDLEMODE),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
-			   MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class dra7xx_usb_otg_ss_hwmod_class = {
-	.name	= "usb_otg_ss",
-	.sysc	= &dra7xx_usb_otg_ss_sysc,
-};
-
-/* usb_otg_ss1 */
-static struct omap_hwmod_opt_clk usb_otg_ss1_opt_clks[] = {
-	{ .role = "refclk960m", .clk = "usb_otg_ss1_refclk960m" },
-};
-
-static struct omap_hwmod dra7xx_usb_otg_ss1_hwmod = {
-	.name		= "usb_otg_ss1",
-	.class		= &dra7xx_usb_otg_ss_hwmod_class,
-	.clkdm_name	= "l3init_clkdm",
-	.main_clk	= "dpll_core_h13x2_ck",
-	.flags		= HWMOD_CLKDM_NOAUTO,
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L3INIT_USB_OTG_SS1_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L3INIT_USB_OTG_SS1_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-	.opt_clks	= usb_otg_ss1_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(usb_otg_ss1_opt_clks),
-};
-
-/* usb_otg_ss2 */
-static struct omap_hwmod_opt_clk usb_otg_ss2_opt_clks[] = {
-	{ .role = "refclk960m", .clk = "usb_otg_ss2_refclk960m" },
-};
-
-static struct omap_hwmod dra7xx_usb_otg_ss2_hwmod = {
-	.name		= "usb_otg_ss2",
-	.class		= &dra7xx_usb_otg_ss_hwmod_class,
-	.clkdm_name	= "l3init_clkdm",
-	.main_clk	= "dpll_core_h13x2_ck",
-	.flags		= HWMOD_CLKDM_NOAUTO,
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L3INIT_USB_OTG_SS2_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L3INIT_USB_OTG_SS2_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-	.opt_clks	= usb_otg_ss2_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(usb_otg_ss2_opt_clks),
-};
-
-/* usb_otg_ss3 */
-static struct omap_hwmod dra7xx_usb_otg_ss3_hwmod = {
-	.name		= "usb_otg_ss3",
-	.class		= &dra7xx_usb_otg_ss_hwmod_class,
-	.clkdm_name	= "l3init_clkdm",
-	.main_clk	= "dpll_core_h13x2_ck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L3INIT_USB_OTG_SS3_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L3INIT_USB_OTG_SS3_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-};
-
-/* usb_otg_ss4 */
-static struct omap_hwmod dra7xx_usb_otg_ss4_hwmod = {
-	.name		= "usb_otg_ss4",
-	.class		= &dra7xx_usb_otg_ss_hwmod_class,
-	.clkdm_name	= "l3init_clkdm",
-	.main_clk	= "dpll_core_h13x2_ck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L3INIT_USB_OTG_SS4_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L3INIT_USB_OTG_SS4_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-};
-
-/*
  * 'vcp' class
  *
  */
@@ -813,38 +718,6 @@ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__sata = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l4_per3 -> usb_otg_ss1 */
-static struct omap_hwmod_ocp_if dra7xx_l4_per3__usb_otg_ss1 = {
-	.master		= &dra7xx_l4_per3_hwmod,
-	.slave		= &dra7xx_usb_otg_ss1_hwmod,
-	.clk		= "dpll_core_h13x2_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per3 -> usb_otg_ss2 */
-static struct omap_hwmod_ocp_if dra7xx_l4_per3__usb_otg_ss2 = {
-	.master		= &dra7xx_l4_per3_hwmod,
-	.slave		= &dra7xx_usb_otg_ss2_hwmod,
-	.clk		= "dpll_core_h13x2_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per3 -> usb_otg_ss3 */
-static struct omap_hwmod_ocp_if dra7xx_l4_per3__usb_otg_ss3 = {
-	.master		= &dra7xx_l4_per3_hwmod,
-	.slave		= &dra7xx_usb_otg_ss3_hwmod,
-	.clk		= "dpll_core_h13x2_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per3 -> usb_otg_ss4 */
-static struct omap_hwmod_ocp_if dra7xx_l4_per3__usb_otg_ss4 = {
-	.master		= &dra7xx_l4_per3_hwmod,
-	.slave		= &dra7xx_usb_otg_ss4_hwmod,
-	.clk		= "dpll_core_h13x2_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* l3_main_1 -> vcp1 */
 static struct omap_hwmod_ocp_if dra7xx_l3_main_1__vcp1 = {
 	.master		= &dra7xx_l3_main_1_hwmod,
@@ -900,9 +773,6 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
 	&dra7xx_l4_cfg__pciess2,
 	&dra7xx_l3_main_1__qspi,
 	&dra7xx_l4_cfg__sata,
-	&dra7xx_l4_per3__usb_otg_ss1,
-	&dra7xx_l4_per3__usb_otg_ss2,
-	&dra7xx_l4_per3__usb_otg_ss3,
 	&dra7xx_l3_main_1__vcp1,
 	&dra7xx_l4_per2__vcp1,
 	&dra7xx_l3_main_1__vcp2,
@@ -911,20 +781,6 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
 };
 
 /* SoC variant specific hwmod links */
-static struct omap_hwmod_ocp_if *dra76x_hwmod_ocp_ifs[] __initdata = {
-	&dra7xx_l4_per3__usb_otg_ss4,
-	NULL,
-};
-
-static struct omap_hwmod_ocp_if *acd_76x_hwmod_ocp_ifs[] __initdata = {
-	NULL,
-};
-
-static struct omap_hwmod_ocp_if *dra74x_hwmod_ocp_ifs[] __initdata = {
-	&dra7xx_l4_per3__usb_otg_ss4,
-	NULL,
-};
-
 static struct omap_hwmod_ocp_if *dra72x_hwmod_ocp_ifs[] __initdata = {
 	NULL,
 };
@@ -942,21 +798,14 @@ int __init dra7xx_hwmod_init(void)
 	ret = omap_hwmod_register_links(dra7xx_hwmod_ocp_ifs);
 
 	if (!ret && soc_is_dra74x()) {
-		ret = omap_hwmod_register_links(dra74x_hwmod_ocp_ifs);
-		if (!ret)
-			ret = omap_hwmod_register_links(rtc_hwmod_ocp_ifs);
+		ret = omap_hwmod_register_links(rtc_hwmod_ocp_ifs);
 	} else if (!ret && soc_is_dra72x()) {
 		ret = omap_hwmod_register_links(dra72x_hwmod_ocp_ifs);
 		if (!ret && !of_machine_is_compatible("ti,dra718"))
 			ret = omap_hwmod_register_links(rtc_hwmod_ocp_ifs);
 	} else if (!ret && soc_is_dra76x()) {
-		ret = omap_hwmod_register_links(dra76x_hwmod_ocp_ifs);
-
-		if (!ret && soc_is_dra76x_acd()) {
-			ret = omap_hwmod_register_links(acd_76x_hwmod_ocp_ifs);
-		} else if (!ret && soc_is_dra76x_abz()) {
+		if (!ret && soc_is_dra76x_abz())
 			ret = omap_hwmod_register_links(rtc_hwmod_ocp_ifs);
-		}
 	}
 
 	return ret;
diff --git a/arch/arm/mach-rpc/ecard.c b/arch/arm/mach-rpc/ecard.c
index 75cfad2cb143..827b50f1c73e 100644
--- a/arch/arm/mach-rpc/ecard.c
+++ b/arch/arm/mach-rpc/ecard.c
@@ -63,7 +63,7 @@ struct ecard_request {
 	struct completion *complete;
 };
 
-struct expcard_blacklist {
+struct expcard_quirklist {
 	unsigned short	 manufacturer;
 	unsigned short	 product;
 	const char	*type;
@@ -79,7 +79,7 @@ static void atomwide_3p_quirk(ecard_t *ec);
 /* List of descriptions of cards which don't have an extended
  * identification, or chunk directories containing a description.
  */
-static struct expcard_blacklist __initdata blacklist[] = {
+static struct expcard_quirklist quirklist[] __initdata = {
 	{ MANU_ACORN, PROD_ACORN_ETHER1, "Acorn Ether1" },
 	{ MANU_ATOMWIDE, PROD_ATOMWIDE_3PSERIAL, NULL, atomwide_3p_quirk },
 };
@@ -935,13 +935,13 @@ static int __init ecard_probe(int slot, unsigned irq, card_type_t type)
 		ec->fiqmask = 4;
 	}
 
-	for (i = 0; i < ARRAY_SIZE(blacklist); i++)
-		if (blacklist[i].manufacturer == ec->cid.manufacturer &&
-		    blacklist[i].product == ec->cid.product) {
-		    	if (blacklist[i].type)
-				ec->card_desc = blacklist[i].type;
-			if (blacklist[i].init)
-				blacklist[i].init(ec);
+	for (i = 0; i < ARRAY_SIZE(quirklist); i++)
+		if (quirklist[i].manufacturer == ec->cid.manufacturer &&
+		    quirklist[i].product == ec->cid.product) {
+			if (quirklist[i].type)
+				ec->card_desc = quirklist[i].type;
+			if (quirklist[i].init)
+				quirklist[i].init(ec);
 			break;
 		}
 
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index c5c06d98b147..7673dde9671a 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -267,7 +267,7 @@ config MACH_TCT_HAMMER
 	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the TinCanTools Hammer Board
-	  <http://www.tincantools.com>
+	  <https://www.tincantools.com>
 
 config MACH_VR1000
 	bool "Thorcom VR1000"
diff --git a/arch/arm/mach-s3c24xx/common-smdk.c b/arch/arm/mach-s3c24xx/common-smdk.c
index 58e30cad386c..75064dfaceb1 100644
--- a/arch/arm/mach-s3c24xx/common-smdk.c
+++ b/arch/arm/mach-s3c24xx/common-smdk.c
@@ -14,6 +14,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/device.h>
 #include <linux/platform_device.h>
 
@@ -44,29 +45,53 @@
 
 /* LED devices */
 
+static struct gpiod_lookup_table smdk_led4_gpio_table = {
+	.dev_id = "s3c24xx_led.0",
+	.table = {
+		GPIO_LOOKUP("GPF", 4, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table smdk_led5_gpio_table = {
+	.dev_id = "s3c24xx_led.1",
+	.table = {
+		GPIO_LOOKUP("GPF", 5, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table smdk_led6_gpio_table = {
+	.dev_id = "s3c24xx_led.2",
+	.table = {
+		GPIO_LOOKUP("GPF", 6, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table smdk_led7_gpio_table = {
+	.dev_id = "s3c24xx_led.3",
+	.table = {
+		GPIO_LOOKUP("GPF", 7, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
+		{ },
+	},
+};
+
 static struct s3c24xx_led_platdata smdk_pdata_led4 = {
-	.gpio		= S3C2410_GPF(4),
-	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.name		= "led4",
 	.def_trigger	= "timer",
 };
 
 static struct s3c24xx_led_platdata smdk_pdata_led5 = {
-	.gpio		= S3C2410_GPF(5),
-	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.name		= "led5",
 	.def_trigger	= "nand-disk",
 };
 
 static struct s3c24xx_led_platdata smdk_pdata_led6 = {
-	.gpio		= S3C2410_GPF(6),
-	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.name		= "led6",
 };
 
 static struct s3c24xx_led_platdata smdk_pdata_led7 = {
-	.gpio		= S3C2410_GPF(7),
-	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.name		= "led7",
 };
 
@@ -179,27 +204,25 @@ static struct platform_device __initdata *smdk_devs[] = {
 	&smdk_led7,
 };
 
-static const struct gpio smdk_led_gpios[] = {
-	{ S3C2410_GPF(4), GPIOF_OUT_INIT_HIGH, NULL },
-	{ S3C2410_GPF(5), GPIOF_OUT_INIT_HIGH, NULL },
-	{ S3C2410_GPF(6), GPIOF_OUT_INIT_HIGH, NULL },
-	{ S3C2410_GPF(7), GPIOF_OUT_INIT_HIGH, NULL },
-};
-
 void __init smdk_machine_init(void)
 {
-	/* Configure the LEDs (even if we have no LED support)*/
-
-	int ret = gpio_request_array(smdk_led_gpios,
-				     ARRAY_SIZE(smdk_led_gpios));
-	if (!WARN_ON(ret < 0))
-		gpio_free_array(smdk_led_gpios, ARRAY_SIZE(smdk_led_gpios));
-
 	if (machine_is_smdk2443())
 		smdk_nand_info.twrph0 = 50;
 
 	s3c_nand_set_platdata(&smdk_nand_info);
 
+	/* Disable pull-up on the LED lines */
+	s3c_gpio_setpull(S3C2410_GPF(4), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPF(5), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPF(6), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPF(7), S3C_GPIO_PULL_NONE);
+
+	/* Add lookups for the lines */
+	gpiod_add_lookup_table(&smdk_led4_gpio_table);
+	gpiod_add_lookup_table(&smdk_led5_gpio_table);
+	gpiod_add_lookup_table(&smdk_led6_gpio_table);
+	gpiod_add_lookup_table(&smdk_led7_gpio_table);
+
 	platform_add_devices(smdk_devs, ARRAY_SIZE(smdk_devs));
 
 	s3c_pm_init();
diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c
index e1c372e5447b..f4710052843a 100644
--- a/arch/arm/mach-s3c24xx/mach-h1940.c
+++ b/arch/arm/mach-s3c24xx/mach-h1940.c
@@ -3,7 +3,7 @@
 // Copyright (c) 2003-2005 Simtec Electronics
 //   Ben Dooks <ben@simtec.co.uk>
 //
-// http://www.handhelds.org/projects/h1940.html
+// https://www.handhelds.org/projects/h1940.html
 
 #include <linux/kernel.h>
 #include <linux/types.h>
diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c
index 9035f868fb34..235749448311 100644
--- a/arch/arm/mach-s3c24xx/mach-mini2440.c
+++ b/arch/arm/mach-s3c24xx/mach-mini2440.c
@@ -6,7 +6,7 @@
 //      Weibing <http://weibing.blogbus.com> and
 //      Michel Pollet <buserror@gmail.com>
 //
-// For product information, visit http://code.google.com/p/mini2440/
+// For product information, visit https://code.google.com/p/mini2440/
 
 #include <linux/kernel.h>
 #include <linux/types.h>
@@ -402,37 +402,68 @@ static struct platform_device mini2440_button_device = {
 
 /* LEDS */
 
+static struct gpiod_lookup_table mini2440_led1_gpio_table = {
+	.dev_id = "s3c24xx_led.1",
+	.table = {
+		GPIO_LOOKUP("GPB", 5, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table mini2440_led2_gpio_table = {
+	.dev_id = "s3c24xx_led.2",
+	.table = {
+		GPIO_LOOKUP("GPB", 6, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table mini2440_led3_gpio_table = {
+	.dev_id = "s3c24xx_led.3",
+	.table = {
+		GPIO_LOOKUP("GPB", 7, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table mini2440_led4_gpio_table = {
+	.dev_id = "s3c24xx_led.4",
+	.table = {
+		GPIO_LOOKUP("GPB", 8, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table mini2440_backlight_gpio_table = {
+	.dev_id = "s3c24xx_led.5",
+	.table = {
+		GPIO_LOOKUP("GPG", 4, NULL, GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static struct s3c24xx_led_platdata mini2440_led1_pdata = {
 	.name		= "led1",
-	.gpio		= S3C2410_GPB(5),
-	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.def_trigger	= "heartbeat",
 };
 
 static struct s3c24xx_led_platdata mini2440_led2_pdata = {
 	.name		= "led2",
-	.gpio		= S3C2410_GPB(6),
-	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.def_trigger	= "nand-disk",
 };
 
 static struct s3c24xx_led_platdata mini2440_led3_pdata = {
 	.name		= "led3",
-	.gpio		= S3C2410_GPB(7),
-	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.def_trigger	= "mmc0",
 };
 
 static struct s3c24xx_led_platdata mini2440_led4_pdata = {
 	.name		= "led4",
-	.gpio		= S3C2410_GPB(8),
-	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.def_trigger	= "",
 };
 
 static struct s3c24xx_led_platdata mini2440_led_backlight_pdata = {
 	.name		= "backlight",
-	.gpio		= S3C2410_GPG(4),
 	.def_trigger	= "backlight",
 };
 
@@ -714,6 +745,20 @@ static void __init mini2440_init(void)
 	i2c_register_board_info(0, mini2440_i2c_devs,
 				ARRAY_SIZE(mini2440_i2c_devs));
 
+	/* Disable pull-up on the LED lines */
+	s3c_gpio_setpull(S3C2410_GPB(5), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPB(6), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPB(7), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPB(8), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPG(4), S3C_GPIO_PULL_NONE);
+
+	/* Add lookups for the lines */
+	gpiod_add_lookup_table(&mini2440_led1_gpio_table);
+	gpiod_add_lookup_table(&mini2440_led2_gpio_table);
+	gpiod_add_lookup_table(&mini2440_led3_gpio_table);
+	gpiod_add_lookup_table(&mini2440_led4_gpio_table);
+	gpiod_add_lookup_table(&mini2440_backlight_gpio_table);
+
 	platform_add_devices(mini2440_devices, ARRAY_SIZE(mini2440_devices));
 
 	if (features.count)	/* the optional features */
diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c
index d856f23939af..998ccff3c174 100644
--- a/arch/arm/mach-s3c24xx/mach-n30.c
+++ b/arch/arm/mach-s3c24xx/mach-n30.c
@@ -9,7 +9,7 @@
 // Copyright (c) 2005-2008 Christer Weinigel <christer@weinigel.se>
 //
 // There is a wiki with more information about the n30 port at
-// http://handhelds.org/moin/moin.cgi/AcerN30Documentation .
+// https://handhelds.org/moin/moin.cgi/AcerN30Documentation .
 
 #include <linux/kernel.h>
 #include <linux/types.h>
@@ -45,6 +45,7 @@
 
 #include <plat/cpu.h>
 #include <plat/devs.h>
+#include <plat/gpio-cfg.h>
 #include <linux/platform_data/mmc-s3cmci.h>
 #include <linux/platform_data/usb-s3c2410_udc.h>
 #include <plat/samsung-time.h>
@@ -246,17 +247,33 @@ static struct platform_device n35_button_device = {
 };
 
 /* This is the bluetooth LED on the device. */
+
+static struct gpiod_lookup_table n30_blue_led_gpio_table = {
+	.dev_id = "s3c24xx_led.1",
+	.table = {
+		GPIO_LOOKUP("GPG", 6, NULL, GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static struct s3c24xx_led_platdata n30_blue_led_pdata = {
 	.name		= "blue_led",
-	.gpio		= S3C2410_GPG(6),
 	.def_trigger	= "",
 };
 
 /* This is the blue LED on the device. Originally used to indicate GPS activity
  * by flashing. */
+
+static struct gpiod_lookup_table n35_blue_led_gpio_table = {
+	.dev_id = "s3c24xx_led.1",
+	.table = {
+		GPIO_LOOKUP("GPD", 8, NULL, GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static struct s3c24xx_led_platdata n35_blue_led_pdata = {
 	.name		= "blue_led",
-	.gpio		= S3C2410_GPD(8),
 	.def_trigger	= "",
 };
 
@@ -264,17 +281,30 @@ static struct s3c24xx_led_platdata n35_blue_led_pdata = {
  * red, blinking green or solid green when the battery is low,
  * charging or full respectively.  By driving GPD9 low, it's possible
  * to force the LED to blink red, so call that warning LED.  */
+
+static struct gpiod_lookup_table n30_warning_led_gpio_table = {
+	.dev_id = "s3c24xx_led.2",
+	.table = {
+		GPIO_LOOKUP("GPD", 9, NULL, GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 static struct s3c24xx_led_platdata n30_warning_led_pdata = {
 	.name		= "warning_led",
-	.flags          = S3C24XX_LEDF_ACTLOW,
-	.gpio		= S3C2410_GPD(9),
 	.def_trigger	= "",
 };
 
+static struct gpiod_lookup_table n35_warning_led_gpio_table = {
+	.dev_id = "s3c24xx_led.2",
+	.table = {
+		GPIO_LOOKUP("GPD", 9, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
+		{ },
+	},
+};
+
 static struct s3c24xx_led_platdata n35_warning_led_pdata = {
 	.name		= "warning_led",
-	.flags          = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
-	.gpio		= S3C2410_GPD(9),
 	.def_trigger	= "",
 };
 
@@ -577,6 +607,12 @@ static void __init n30_init(void)
 				      S3C2410_MISCCR_USBSUSPND0 |
 				      S3C2410_MISCCR_USBSUSPND1, 0x0);
 
+		/* Disable pull-up and add GPIO tables */
+		s3c_gpio_setpull(S3C2410_GPG(6), S3C_GPIO_PULL_NONE);
+		s3c_gpio_setpull(S3C2410_GPD(9), S3C_GPIO_PULL_NONE);
+		gpiod_add_lookup_table(&n30_blue_led_gpio_table);
+		gpiod_add_lookup_table(&n30_warning_led_gpio_table);
+
 		platform_add_devices(n30_devices, ARRAY_SIZE(n30_devices));
 	}
 
@@ -594,6 +630,12 @@ static void __init n30_init(void)
 				      S3C2410_MISCCR_USBSUSPND1,
 				      S3C2410_MISCCR_USBSUSPND0);
 
+		/* Disable pull-up and add GPIO tables */
+		s3c_gpio_setpull(S3C2410_GPD(8), S3C_GPIO_PULL_NONE);
+		s3c_gpio_setpull(S3C2410_GPD(9), S3C_GPIO_PULL_NONE);
+		gpiod_add_lookup_table(&n35_blue_led_gpio_table);
+		gpiod_add_lookup_table(&n35_warning_led_gpio_table);
+
 		platform_add_devices(n35_devices, ARRAY_SIZE(n35_devices));
 	}
 }
diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c
index 5d48e5b6e738..ff9e3197309b 100644
--- a/arch/arm/mach-s3c24xx/mach-qt2410.c
+++ b/arch/arm/mach-s3c24xx/mach-qt2410.c
@@ -177,9 +177,15 @@ static struct platform_device qt2410_cs89x0 = {
 
 /* LED */
 
+static struct gpiod_lookup_table qt2410_led_gpio_table = {
+	.dev_id = "s3c24xx_led.0",
+	.table = {
+		GPIO_LOOKUP("GPB", 0, NULL, GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN),
+		{ },
+	},
+};
+
 static struct s3c24xx_led_platdata qt2410_pdata_led = {
-	.gpio		= S3C2410_GPB(0),
-	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.name		= "led",
 	.def_trigger	= "timer",
 };
@@ -338,6 +344,8 @@ static void __init qt2410_machine_init(void)
 	s3c_i2c0_set_platdata(NULL);
 
 	gpiod_add_lookup_table(&qt2410_spi_gpiod_table);
+	s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE);
+	gpiod_add_lookup_table(&qt2410_led_gpio_table);
 	platform_add_devices(qt2410_devices, ARRAY_SIZE(qt2410_devices));
 	s3c_pm_init();
 }
diff --git a/arch/arm/mach-s3c24xx/mach-rx3715.c b/arch/arm/mach-s3c24xx/mach-rx3715.c
index 529c6faf862f..995f1ff34a1b 100644
--- a/arch/arm/mach-s3c24xx/mach-rx3715.c
+++ b/arch/arm/mach-s3c24xx/mach-rx3715.c
@@ -3,7 +3,7 @@
 // Copyright (c) 2003-2004 Simtec Electronics
 //	Ben Dooks <ben@simtec.co.uk>
 //
-// http://www.handhelds.org/projects/rx3715.html
+// https://www.handhelds.org/projects/rx3715.html
 
 #include <linux/kernel.h>
 #include <linux/types.h>
diff --git a/arch/arm/mach-s3c24xx/mach-vr1000.c b/arch/arm/mach-s3c24xx/mach-vr1000.c
index 853e74f9b8b5..6a3fb2becc7c 100644
--- a/arch/arm/mach-s3c24xx/mach-vr1000.c
+++ b/arch/arm/mach-s3c24xx/mach-vr1000.c
@@ -13,6 +13,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 #include <linux/dm9000.h>
 #include <linux/i2c.h>
 
@@ -40,6 +41,7 @@
 
 #include <plat/cpu.h>
 #include <plat/devs.h>
+#include <plat/gpio-cfg.h>
 #include <plat/samsung-time.h>
 
 #include "bast.h"
@@ -223,21 +225,42 @@ static struct platform_device vr1000_dm9k1 = {
 
 /* LEDS */
 
+static struct gpiod_lookup_table vr1000_led1_gpio_table = {
+	.dev_id = "s3c24xx_led.1",
+	.table = {
+		GPIO_LOOKUP("GPB", 0, NULL, GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table vr1000_led2_gpio_table = {
+	.dev_id = "s3c24xx_led.2",
+	.table = {
+		GPIO_LOOKUP("GPB", 1, NULL, GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table vr1000_led3_gpio_table = {
+	.dev_id = "s3c24xx_led.3",
+	.table = {
+		GPIO_LOOKUP("GPB", 2, NULL, GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static struct s3c24xx_led_platdata vr1000_led1_pdata = {
 	.name		= "led1",
-	.gpio		= S3C2410_GPB(0),
 	.def_trigger	= "",
 };
 
 static struct s3c24xx_led_platdata vr1000_led2_pdata = {
 	.name		= "led2",
-	.gpio		= S3C2410_GPB(1),
 	.def_trigger	= "",
 };
 
 static struct s3c24xx_led_platdata vr1000_led3_pdata = {
 	.name		= "led3",
-	.gpio		= S3C2410_GPB(2),
 	.def_trigger	= "",
 };
 
@@ -317,6 +340,15 @@ static void __init vr1000_init_time(void)
 static void __init vr1000_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
+
+	/* Disable pull-up on LED lines and register GPIO lookups */
+	s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPB(1), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPB(2), S3C_GPIO_PULL_NONE);
+	gpiod_add_lookup_table(&vr1000_led1_gpio_table);
+	gpiod_add_lookup_table(&vr1000_led2_gpio_table);
+	gpiod_add_lookup_table(&vr1000_led3_gpio_table);
+
 	platform_add_devices(vr1000_devices, ARRAY_SIZE(vr1000_devices));
 
 	i2c_register_board_info(0, vr1000_i2c_devs,
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index aa265ede5730..2012fa8c28cf 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -652,7 +652,7 @@ static void __init map_sa1100_gpio_regs( void )
  */
 static void __init get_assabet_scr(void)
 {
-	unsigned long uninitialized_var(scr), i;
+	unsigned long scr, i;
 
 	GPDR |= 0x3fc;			/* Configure GPIO 9:2 as outputs */
 	GPSR = 0x3fc;			/* Write 0xFF to GPIO 9:2 */
diff --git a/arch/arm/mach-socfpga/pm.c b/arch/arm/mach-socfpga/pm.c
index 6ed887cf8dc9..365c0428b21b 100644
--- a/arch/arm/mach-socfpga/pm.c
+++ b/arch/arm/mach-socfpga/pm.c
@@ -49,14 +49,14 @@ static int socfpga_setup_ocram_self_refresh(void)
 	if (!ocram_pool) {
 		pr_warn("%s: ocram pool unavailable!\n", __func__);
 		ret = -ENODEV;
-		goto put_node;
+		goto put_device;
 	}
 
 	ocram_base = gen_pool_alloc(ocram_pool, socfpga_sdram_self_refresh_sz);
 	if (!ocram_base) {
 		pr_warn("%s: unable to alloc ocram!\n", __func__);
 		ret = -ENOMEM;
-		goto put_node;
+		goto put_device;
 	}
 
 	ocram_pbase = gen_pool_virt_to_phys(ocram_pool, ocram_base);
@@ -67,7 +67,7 @@ static int socfpga_setup_ocram_self_refresh(void)
 	if (!suspend_ocram_base) {
 		pr_warn("%s: __arm_ioremap_exec failed!\n", __func__);
 		ret = -ENOMEM;
-		goto put_node;
+		goto put_device;
 	}
 
 	/* Copy the code that puts DDR in self refresh to ocram */
@@ -81,6 +81,8 @@ static int socfpga_setup_ocram_self_refresh(void)
 	if (!socfpga_sdram_self_refresh_in_ocram)
 		ret = -EFAULT;
 
+put_device:
+	put_device(&pdev->dev);
 put_node:
 	of_node_put(np);
 
diff --git a/arch/arm/mach-sti/board-dt.c b/arch/arm/mach-sti/board-dt.c
index dcb98937fcf5..ffecbf29646f 100644
--- a/arch/arm/mach-sti/board-dt.c
+++ b/arch/arm/mach-sti/board-dt.c
@@ -20,14 +20,6 @@ static const char *const stih41x_dt_match[] __initconst = {
 	NULL
 };
 
-static void sti_l2_write_sec(unsigned long val, unsigned reg)
-{
-	/*
-	 * We can't write to secure registers as we are in non-secure
-	 * mode, until we have some SMI service available.
-	 */
-}
-
 DT_MACHINE_START(STM, "STi SoC with Flattened Device Tree")
 	.dt_compat	= stih41x_dt_match,
 	.l2c_aux_val	= L2C_AUX_CTRL_SHARED_OVERRIDE |
@@ -36,5 +28,4 @@ DT_MACHINE_START(STM, "STi SoC with Flattened Device Tree")
 			  L2C_AUX_CTRL_WAY_SIZE(4),
 	.l2c_aux_mask	= 0xc0000fff,
 	.smp		= smp_ops(sti_smp_ops),
-	.l2c_write_sec	= sti_l2_write_sec,
 MACHINE_END
diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c
index 84718eddae60..f4bfc1cac91a 100644
--- a/arch/arm/mm/alignment.c
+++ b/arch/arm/mm/alignment.c
@@ -774,7 +774,7 @@ static int alignment_get_arm(struct pt_regs *regs, u32 *ip, u32 *inst)
 	if (user_mode(regs))
 		fault = get_user(instr, ip);
 	else
-		fault = probe_kernel_address(ip, instr);
+		fault = get_kernel_nofault(instr, ip);
 
 	*inst = __mem_to_opcode_arm(instr);
 
@@ -789,7 +789,7 @@ static int alignment_get_thumb(struct pt_regs *regs, u16 *ip, u16 *inst)
 	if (user_mode(regs))
 		fault = get_user(instr, ip);
 	else
-		fault = probe_kernel_address(ip, instr);
+		fault = get_kernel_nofault(instr, ip);
 
 	*inst = __mem_to_opcode_thumb16(instr);
 
@@ -799,7 +799,7 @@ static int alignment_get_thumb(struct pt_regs *regs, u16 *ip, u16 *inst)
 static int
 do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 {
-	union offset_union uninitialized_var(offset);
+	union offset_union offset;
 	unsigned long instrptr;
 	int (*handler)(unsigned long addr, u32 instr, struct pt_regs *regs);
 	unsigned int type;
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 628028bfbb92..bcd82614c25d 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -966,7 +966,7 @@ void __init create_mapping_late(struct mm_struct *mm, struct map_desc *md,
 	pud_t *pud;
 
 	p4d = p4d_alloc(mm, pgd_offset(mm, md->virtual), md->virtual);
-	if (!WARN_ON(!p4d))
+	if (WARN_ON(!p4d))
 		return;
 	pud = pud_alloc(mm, p4d, md->virtual);
 	if (WARN_ON(!pud))
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 7d859994ff95..b2e9e822426f 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -16,7 +16,7 @@
  *
  * Support functions for the OMAP internal DMA channels.
  *
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2010 Texas Instruments Incorporated - https://www.ti.com/
  * Converted DMA library into DMA platform driver.
  *	- G, Manjunath Kondaiah <manjugk@ti.com>
  */
diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c
index 26a531ebb6e9..734f0be4f14a 100644
--- a/arch/arm/plat-orion/gpio.c
+++ b/arch/arm/plat-orion/gpio.c
@@ -442,6 +442,7 @@ static void orion_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
 
 	struct orion_gpio_chip *ochip = gpiochip_get_data(chip);
 	u32 out, io_conf, blink, in_pol, data_in, cause, edg_msk, lvl_msk;
+	const char *label;
 	int i;
 
 	out	= readl_relaxed(GPIO_OUT(ochip));
@@ -453,15 +454,10 @@ static void orion_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
 	edg_msk	= readl_relaxed(GPIO_EDGE_MASK(ochip));
 	lvl_msk	= readl_relaxed(GPIO_LEVEL_MASK(ochip));
 
-	for (i = 0; i < chip->ngpio; i++) {
-		const char *label;
+	for_each_requested_gpio(chip, i, label) {
 		u32 msk;
 		bool is_out;
 
-		label = gpiochip_is_requested(chip, i);
-		if (!label)
-			continue;
-
 		msk = 1 << i;
 		is_out = !(io_conf & msk);
 
diff --git a/arch/arm/tools/syscall.tbl b/arch/arm/tools/syscall.tbl
index d5cae5ffede0..7e8ee4adf269 100644
--- a/arch/arm/tools/syscall.tbl
+++ b/arch/arm/tools/syscall.tbl
@@ -449,6 +449,7 @@
 433	common	fspick				sys_fspick
 434	common	pidfd_open			sys_pidfd_open
 435	common	clone3				sys_clone3
+436	common	close_range			sys_close_range
 437	common	openat2				sys_openat2
 438	common	pidfd_getfd			sys_pidfd_getfd
 439	common	faccessat2			sys_faccessat2
diff --git a/arch/arm/vdso/Makefile b/arch/arm/vdso/Makefile
index d3c9f03e7e79..a54f70731d9f 100644
--- a/arch/arm/vdso/Makefile
+++ b/arch/arm/vdso/Makefile
@@ -29,7 +29,7 @@ CPPFLAGS_vdso.lds += -P -C -U$(ARCH)
 CFLAGS_REMOVE_vdso.o = -pg
 
 # Force -O2 to avoid libgcc dependencies
-CFLAGS_REMOVE_vgettimeofday.o = -pg -Os
+CFLAGS_REMOVE_vgettimeofday.o = -pg -Os $(GCC_PLUGINS_CFLAGS)
 ifeq ($(c-gettimeofday-y),)
 CFLAGS_vgettimeofday.o = -O2
 else
diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c
index fd4e1ce1daf9..e93145d72c26 100644
--- a/arch/arm/xen/enlighten.c
+++ b/arch/arm/xen/enlighten.c
@@ -241,7 +241,6 @@ static int __init fdt_find_hyper_node(unsigned long node, const char *uname,
  * see Documentation/devicetree/bindings/arm/xen.txt for the
  * documentation of the Xen Device Tree format.
  */
-#define GRANT_TABLE_PHYSADDR 0
 void __init xen_early_init(void)
 {
 	of_scan_flat_dt(fdt_find_hyper_node, NULL);
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 31380da53689..e11b4ea06127 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -118,6 +118,7 @@ config ARM64
 	select GENERIC_STRNLEN_USER
 	select GENERIC_TIME_VSYSCALL
 	select GENERIC_GETTIMEOFDAY
+	select GENERIC_VDSO_TIME_NS
 	select HANDLE_DOMAIN_IRQ
 	select HARDIRQS_SW_RESEND
 	select HAVE_PCI
@@ -148,7 +149,6 @@ config ARM64
 	select HAVE_CMPXCHG_DOUBLE
 	select HAVE_CMPXCHG_LOCAL
 	select HAVE_CONTEXT_TRACKING
-	select HAVE_COPY_THREAD_TLS
 	select HAVE_DEBUG_BUGVERBOSE
 	select HAVE_DEBUG_KMEMLEAK
 	select HAVE_DMA_CONTIGUOUS
@@ -1327,6 +1327,8 @@ config SWP_EMULATION
 	  ARMv8 obsoletes the use of A32 SWP/SWPB instructions such that
 	  they are always undefined. Say Y here to enable software
 	  emulation of these instructions for userspace using LDXR/STXR.
+	  This feature can be controlled at runtime with the abi.swp
+	  sysctl which is disabled by default.
 
 	  In some older versions of glibc [<=2.8] SWP is used during futex
 	  trylock() operations with the assumption that the code will not
@@ -1353,7 +1355,8 @@ config CP15_BARRIER_EMULATION
 	  Say Y here to enable software emulation of these
 	  instructions for AArch32 userspace code. When this option is
 	  enabled, CP15 barrier usage is traced which can help
-	  identify software that needs updating.
+	  identify software that needs updating. This feature can be
+	  controlled at runtime with the abi.cp15_barrier sysctl.
 
 	  If unsure, say Y
 
@@ -1364,7 +1367,8 @@ config SETEND_EMULATION
 	  AArch32 EL0, and is deprecated in ARMv8.
 
 	  Say Y here to enable software emulation of the instruction
-	  for AArch32 userspace code.
+	  for AArch32 userspace code. This feature can be controlled
+	  at runtime with the abi.setend sysctl.
 
 	  Note: All the cpus on the system must have mixed endian support at EL0
 	  for this feature to be enabled. If a new CPU - which doesn't support mixed
@@ -1518,9 +1522,9 @@ config ARM64_PTR_AUTH
 	default y
 	depends on !KVM || ARM64_VHE
 	depends on (CC_HAS_SIGN_RETURN_ADDRESS || CC_HAS_BRANCH_PROT_PAC_RET) && AS_HAS_PAC
-	# GCC 9.1 and later inserts a .note.gnu.property section note for PAC
+	# Modern compilers insert a .note.gnu.property section note for PAC
 	# which is only understood by binutils starting with version 2.33.1.
-	depends on !CC_IS_GCC || GCC_VERSION < 90100 || LD_VERSION >= 233010000
+	depends on LD_IS_LLD || LD_VERSION >= 233010000 || (CC_IS_GCC && GCC_VERSION < 90100)
 	depends on !CC_IS_CLANG || AS_HAS_CFI_NEGATE_RA_STATE
 	depends on (!FUNCTION_GRAPH_TRACER || DYNAMIC_FTRACE_WITH_REGS)
 	help
@@ -1564,7 +1568,7 @@ config CC_HAS_SIGN_RETURN_ADDRESS
 	def_bool $(cc-option,-msign-return-address=all)
 
 config AS_HAS_PAC
-	def_bool $(as-option,-Wa$(comma)-march=armv8.3-a)
+	def_bool $(cc-option,-Wa$(comma)-march=armv8.3-a)
 
 config AS_HAS_CFI_NEGATE_RA_STATE
 	def_bool $(as-instr,.cfi_startproc\n.cfi_negate_ra_state\n.cfi_endproc\n)
@@ -1596,6 +1600,20 @@ config ARM64_AMU_EXTN
 	  correctly reflect reality. Most commonly, the value read will be 0,
 	  indicating that the counter is not enabled.
 
+config AS_HAS_ARMV8_4
+	def_bool $(cc-option,-Wa$(comma)-march=armv8.4-a)
+
+config ARM64_TLB_RANGE
+	bool "Enable support for tlbi range feature"
+	default y
+	depends on AS_HAS_ARMV8_4
+	help
+	  ARMv8.4-TLBI provides TLBI invalidation instruction that apply to a
+	  range of input addresses.
+
+	  The feature introduces new assembly instructions, and they were
+	  support when binutils >= 2.30.
+
 endmenu
 
 menu "ARMv8.5 architectural features"
@@ -1630,6 +1648,8 @@ config ARM64_BTI_KERNEL
 	depends on CC_HAS_BRANCH_PROT_PAC_RET_BTI
 	# https://gcc.gnu.org/bugzilla/show_bug.cgi?id=94697
 	depends on !CC_IS_GCC || GCC_VERSION >= 100100
+	# https://reviews.llvm.org/rGb8ae3fdfa579dbf366b1bb1cbfdbf8c51db7fa55
+	depends on !CC_IS_CLANG || CLANG_VERSION >= 100001
 	depends on !(CC_IS_CLANG && GCOV_KERNEL)
 	depends on (!FUNCTION_GRAPH_TRACER || DYNAMIC_FTRACE_WITH_REGS)
 	help
diff --git a/arch/arm64/Kconfig.debug b/arch/arm64/Kconfig.debug
index cdf7ec0b975e..265c4461031f 100644
--- a/arch/arm64/Kconfig.debug
+++ b/arch/arm64/Kconfig.debug
@@ -8,21 +8,6 @@ config PID_IN_CONTEXTIDR
 	  instructions during context switch. Say Y here only if you are
 	  planning to use hardware trace tools with this kernel.
 
-config ARM64_RANDOMIZE_TEXT_OFFSET
-	bool "Randomize TEXT_OFFSET at build time"
-	help
-	  Say Y here if you want the image load offset (AKA TEXT_OFFSET)
-	  of the kernel to be randomized at build-time. When selected,
-	  this option will cause TEXT_OFFSET to be randomized upon any
-	  build of the kernel, and the offset will be reflected in the
-	  text_offset field of the resulting Image. This can be used to
-	  fuzz-test bootloaders which respect text_offset.
-
-	  This option is intended for bootloader and/or kernel testing
-	  only. Bootloaders must make no assumptions regarding the value
-	  of TEXT_OFFSET and platforms must not require a specific
-	  value.
-
 config DEBUG_EFI
 	depends on EFI && DEBUG_INFO
 	bool "UEFI debugging"
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 8dd05b2a925c..cd58f8495c45 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -89,6 +89,20 @@ config ARCH_EXYNOS
 	help
 	  This enables support for ARMv8 based Samsung Exynos SoC family.
 
+config ARCH_SPARX5
+	bool "ARMv8 based Microchip Sparx5 SoC family"
+	select PINCTRL
+	select DW_APB_TIMER_OF
+	help
+	  This enables support for the Microchip Sparx5 ARMv8-based
+	  SoC family of TSN-capable gigabit switches.
+
+	  The SparX-5 Ethernet switch family provides a rich set of
+	  switching features such as advanced TCAM-based VLAN and QoS
+	  processing enabling delivery of differentiated services, and
+	  security through TCAM-based frame processing using versatile
+	  content aware processor (VCAP).
+
 config ARCH_K3
 	bool "Texas Instruments Inc. K3 multicore SoC architecture"
 	select PM_GENERIC_DOMAINS if PM
@@ -98,6 +112,7 @@ config ARCH_K3
 	select TI_SCI_PROTOCOL
 	select TI_SCI_INTR_IRQCHIP
 	select TI_SCI_INTA_IRQCHIP
+	select TI_K3_SOCINFO
 	help
 	  This enables support for Texas Instruments' K3 multicore SoC
 	  architecture.
@@ -121,6 +136,11 @@ config ARCH_HISI
 	help
 	  This enables support for Hisilicon ARMv8 SoC family
 
+config ARCH_KEEMBAY
+	bool "Keem Bay SoC"
+	help
+	  This enables support for Intel Movidius SoC code-named Keem Bay.
+
 config ARCH_MEDIATEK
 	bool "MediaTek SoC Family"
 	select ARM_GIC
diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile
index 76359cfb328a..55bc8546d9c7 100644
--- a/arch/arm64/Makefile
+++ b/arch/arm64/Makefile
@@ -82,11 +82,18 @@ endif
 # compiler to generate them and consequently to break the single image contract
 # we pass it only to the assembler. This option is utilized only in case of non
 # integrated assemblers.
+ifneq ($(CONFIG_AS_HAS_ARMV8_4), y)
 branch-prot-flags-$(CONFIG_AS_HAS_PAC) += -Wa,-march=armv8.3-a
 endif
+endif
 
 KBUILD_CFLAGS += $(branch-prot-flags-y)
 
+ifeq ($(CONFIG_AS_HAS_ARMV8_4), y)
+# make sure to pass the newest target architecture to -march.
+KBUILD_CFLAGS	+= -Wa,-march=armv8.4-a
+endif
+
 ifeq ($(CONFIG_SHADOW_CALL_STACK), y)
 KBUILD_CFLAGS	+= -ffixed-x18
 endif
@@ -121,13 +128,7 @@ endif
 head-y		:= arch/arm64/kernel/head.o
 
 # The byte offset of the kernel image in RAM from the start of RAM.
-ifeq ($(CONFIG_ARM64_RANDOMIZE_TEXT_OFFSET), y)
-TEXT_OFFSET := $(shell awk "BEGIN {srand(); printf \"0x%06x\n\", \
-		 int(2 * 1024 * 1024 / (2 ^ $(CONFIG_ARM64_PAGE_SHIFT)) * \
-		 rand()) * (2 ^ $(CONFIG_ARM64_PAGE_SHIFT))}")
-else
 TEXT_OFFSET := 0x0
-endif
 
 ifeq ($(CONFIG_KASAN_SW_TAGS), y)
 KASAN_SHADOW_SCALE_SHIFT := 4
@@ -143,7 +144,7 @@ export	TEXT_OFFSET
 
 core-y		+= arch/arm64/
 libs-y		:= arch/arm64/lib/ $(libs-y)
-core-$(CONFIG_EFI_STUB) += $(objtree)/drivers/firmware/efi/libstub/lib.a
+libs-$(CONFIG_EFI_STUB) += $(objtree)/drivers/firmware/efi/libstub/lib.a
 
 # Default target when executing plain make
 boot		:= arch/arm64/boot
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index f19b762c008d..270e8aabbac8 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
 subdir-y += actions
-subdir-y += al
 subdir-y += allwinner
 subdir-y += altera
+subdir-y += amazon
 subdir-y += amd
 subdir-y += amlogic
 subdir-y += apm
@@ -17,6 +17,7 @@ subdir-y += intel
 subdir-y += lg
 subdir-y += marvell
 subdir-y += mediatek
+subdir-y += microchip
 subdir-y += nvidia
 subdir-y += qcom
 subdir-y += realtek
diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index e4d3cd0ac5bb..916d10d5b87c 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -11,6 +11,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinebook.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinephone-1.0.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinephone-1.1.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinephone-1.2.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinetab.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-teres-i.dtb
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts
index 06a775c41664..3e99a87e9ce5 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts
@@ -9,3 +9,22 @@
 	model = "Pine64 PinePhone Braveheart (1.1)";
 	compatible = "pine64,pinephone-1.1", "allwinner,sun50i-a64";
 };
+
+&backlight {
+	power-supply = <&reg_ldo_io0>;
+	/*
+	 * PWM backlight circuit on this PinePhone revision was changed since
+	 * 1.0, and the lowest PWM duty cycle that doesn't lead to backlight
+	 * being off is around 20%. Duty cycle for the lowest brightness level
+	 * also varries quite a bit between individual boards, so the lowest
+	 * value here was chosen as a safe default.
+	 */
+	brightness-levels = <
+		774  793  814  842
+		882  935  1003 1088
+		1192 1316 1462 1633
+		1830 2054 2309 2596
+		2916 3271 3664 4096>;
+	num-interpolated-steps = <50>;
+	default-brightness-level = <400>;
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts
new file mode 100644
index 000000000000..a9f5b670c9b8
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2020 Ondrej Jirman <megous@megous.com>
+
+/dts-v1/;
+
+#include "sun50i-a64-pinephone.dtsi"
+
+/ {
+	model = "Pine64 PinePhone (1.2)";
+	compatible = "pine64,pinephone-1.2", "allwinner,sun50i-a64";
+};
+
+&backlight {
+	power-supply = <&reg_ldo_io0>;
+	/*
+	 * PWM backlight circuit on this PinePhone revision was changed since 1.0,
+	 * and the lowest PWM duty cycle that doesn't lead to backlight being off
+	 * is around 10%. Duty cycle for the lowest brightness level also varries
+	 * quite a bit between individual boards, so the lowest value here was
+	 * chosen as a safe default.
+	 */
+	brightness-levels = <
+		5000 5248 5506 5858 6345
+		6987 7805 8823 10062 11543
+		13287 15317 17654 20319 23336
+		26724 30505 34702 39335 44427
+		50000
+	>;
+	num-interpolated-steps = <50>;
+	default-brightness-level = <500>;
+};
+
+&lis3mdl {
+	/*
+	 * Board revision 1.2 fixed routing of the interrupt to DRDY pin,
+	 * enable interrupts.
+	 */
+	interrupt-parent = <&pio>;
+	interrupts = <1 1 IRQ_TYPE_EDGE_RISING>; /* PB1 */
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
index cefda145c3c9..25150aba749d 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
@@ -16,6 +16,13 @@
 		serial0 = &uart0;
 	};
 
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&r_pwm 0 50000 PWM_POLARITY_INVERTED>;
+		enable-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
+		/* Backlight configuration differs per PinePhone revision. */
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
@@ -84,6 +91,28 @@
 	status = "okay";
 };
 
+&de {
+	status = "okay";
+};
+
+&dphy {
+	status = "okay";
+};
+
+&dsi {
+	vcc-dsi-supply = <&reg_dldo1>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "xingbangda,xbd599";
+		reg = <0>;
+		reset-gpios = <&pio 3 23 GPIO_ACTIVE_LOW>; /* PD23 */
+		iovcc-supply = <&reg_dldo2>;
+		vcc-supply = <&reg_ldo_io0>;
+		backlight = <&backlight>;
+	};
+};
+
 &ehci0 {
 	status = "okay";
 };
@@ -92,11 +121,28 @@
 	status = "okay";
 };
 
+&i2c0 {
+	status = "okay";
+
+	touchscreen@5d {
+		compatible = "goodix,gt917s";
+		reg = <0x5d>;
+		interrupt-parent = <&pio>;
+		interrupts = <7 4 IRQ_TYPE_LEVEL_HIGH>; /* PH4 */
+		irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+		reset-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+		AVDD28-supply = <&reg_ldo_io0>;
+		VDDIO-supply = <&reg_ldo_io0>;
+		touchscreen-size-x = <720>;
+		touchscreen-size-y = <1440>;
+	};
+};
+
 &i2c1 {
 	status = "okay";
 
 	/* Magnetometer */
-	lis3mdl@1e {
+	lis3mdl: lis3mdl@1e {
 		compatible = "st,lis3mdl-magn";
 		reg = <0x1e>;
 		vdd-supply = <&reg_dldo1>;
@@ -188,6 +234,10 @@
 	 */
 };
 
+&r_pwm {
+	status = "okay";
+};
+
 &r_rsb {
 	status = "okay";
 
@@ -279,7 +329,7 @@
 
 &reg_dldo4 {
 	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <3300000>;
+	regulator-max-microvolt = <1800000>;
 	regulator-name = "vcc-wifi-io";
 };
 
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus-v1.2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus-v1.2.dts
index 2e2b14c0ae75..8857a3791593 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus-v1.2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-bananapi-m2-plus-v1.2.dts
@@ -3,6 +3,7 @@
 
 /dts-v1/;
 #include "sun50i-h5.dtsi"
+#include "sun50i-h5-cpu-opp.dtsi"
 #include <arm/sunxi-bananapi-m2-plus-v1.2.dtsi>
 
 / {
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-cpu-opp.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5-cpu-opp.dtsi
new file mode 100644
index 000000000000..b2657201957e
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-cpu-opp.dtsi
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2020 Chen-Yu Tsai <wens@csie.org>
+
+/ {
+	cpu_opp_table: cpu-opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-408000000 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <1000000 1000000 1310000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-648000000 {
+			opp-hz = /bits/ 64 <648000000>;
+			opp-microvolt = <1040000 1040000 1310000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <1080000 1080000 1310000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-912000000 {
+			opp-hz = /bits/ 64 <912000000>;
+			opp-microvolt = <1120000 1120000 1310000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-960000000 {
+			opp-hz = /bits/ 64 <960000000>;
+			opp-microvolt = <1160000 1160000 1310000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1200000 1200000 1310000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-microvolt = <1240000 1240000 1310000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1104000000 {
+			opp-hz = /bits/ 64 <1104000000>;
+			opp-microvolt = <1260000 1260000 1310000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+
+		opp-1152000000 {
+			opp-hz = /bits/ 64 <1152000000>;
+			opp-microvolt = <1300000 1300000 1310000>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+		};
+	};
+};
+
+&cpu0 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu1 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu2 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
+
+&cpu3 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts
index 64d35daf2023..d811df332824 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-libretech-all-h3-cc.dts
@@ -4,6 +4,7 @@
 
 /dts-v1/;
 #include "sun50i-h5.dtsi"
+#include "sun50i-h5-cpu-opp.dtsi"
 #include <arm/sunxi-libretech-all-h3-cc.dtsi>
 
 / {
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
index c95a68541309..de19e68eb84e 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
@@ -30,6 +30,21 @@
 		};
 	};
 
+	leds {
+		compatible = "gpio-leds";
+
+		pwr {
+			label = "orangepi:green:pwr";
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		status {
+			label = "orangepi:red:status";
+			gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
 	reg_vcc3v3: vcc3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc3v3";
@@ -48,6 +63,10 @@
 	status = "okay";
 };
 
+&ehci0 {
+	status = "okay";
+};
+
 &hdmi {
 	status = "okay";
 };
@@ -92,6 +111,10 @@
 	status = "okay";
 };
 
+&ohci0 {
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pa_pins>;
@@ -103,3 +126,18 @@
 	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
 	status = "okay";
 };
+
+&usb_otg {
+	/*
+	 * According to schematics CN1 MicroUSB port can be used to take
+	 * external 5V to power up the board VBUS. On the contrary CN1 MicroUSB
+	 * port cannot provide power externally even if the board is powered
+	 * via GPIO pins. It thus makes sense to force peripheral mode.
+	 */
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
index 4462a68c0681..6735e316a39c 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi
@@ -3,6 +3,8 @@
 
 #include <arm/sunxi-h3-h5.dtsi>
 
+#include <dt-bindings/thermal/thermal.h>
+
 / {
 	cpus {
 		#address-cells = <1>;
@@ -13,6 +15,9 @@
 			device_type = "cpu";
 			reg = <0>;
 			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@1 {
@@ -20,6 +25,9 @@
 			device_type = "cpu";
 			reg = <1>;
 			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			#cooling-cells = <2>;
 		};
 
 		cpu2: cpu@2 {
@@ -27,6 +35,9 @@
 			device_type = "cpu";
 			reg = <2>;
 			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			#cooling-cells = <2>;
 		};
 
 		cpu3: cpu@3 {
@@ -34,6 +45,9 @@
 			device_type = "cpu";
 			reg = <3>;
 			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			#cooling-cells = <2>;
 		};
 	};
 
@@ -165,6 +179,30 @@
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
 			thermal-sensors = <&ths 0>;
+
+			trips {
+				cpu_hot_trip: cpu-hot {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_very_hot_trip: cpu-very-hot {
+					temperature = <100000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				cpu-hot-limit {
+					trip = <&cpu_hot_trip>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 
 		gpu_thermal {
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index 78b1361dfbb9..9ce78a7b117d 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -161,6 +161,7 @@
 			resets = <&ccu RST_BUS_VE>;
 			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 			allwinner,sram = <&ve_sram 1>;
+			iommus = <&iommu 3>;
 		};
 
 		gpu: gpu@1800000 {
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
index d1fc9c2055f4..a6fb01c7ab34 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
@@ -77,7 +77,7 @@
 		method = "smc";
 	};
 
-	intc: intc@fffc1000 {
+	intc: interrupt-controller@fffc1000 {
 		compatible = "arm,gic-400", "arm,cortex-a15-gic";
 		#interrupt-cells = <3>;
 		interrupt-controller;
@@ -302,7 +302,7 @@
 			status = "disabled";
 		};
 
-		nand: nand@ffb90000 {
+		nand: nand-controller@ffb90000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "altr,socfpga-denali-nand";
@@ -380,6 +380,7 @@
 			reg = <0xffda4000 0x1000>;
 			interrupts = <0 99 4>;
 			resets = <&rst SPIM0_RESET>;
+			reset-names = "spi";
 			reg-io-width = <4>;
 			num-cs = <4>;
 			clocks = <&clkmgr STRATIX10_L4_MAIN_CLK>;
@@ -393,6 +394,7 @@
 			reg = <0xffda5000 0x1000>;
 			interrupts = <0 100 4>;
 			resets = <&rst SPIM1_RESET>;
+			reset-names = "spi";
 			reg-io-width = <4>;
 			num-cs = <4>;
 			clocks = <&clkmgr STRATIX10_L4_MAIN_CLK>;
@@ -445,7 +447,7 @@
 			clock-names = "timer";
 		};
 
-		uart0: serial0@ffc02000 {
+		uart0: serial@ffc02000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0xffc02000 0x100>;
 			interrupts = <0 108 4>;
@@ -456,7 +458,7 @@
 			status = "disabled";
 		};
 
-		uart1: serial1@ffc02100 {
+		uart1: serial@ffc02100 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0xffc02100 0x100>;
 			interrupts = <0 109 4>;
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
index f6c4a15079d3..feadd21bc0dc 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
@@ -155,6 +155,7 @@
 };
 
 &qspi {
+	status = "okay";
 	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts
index 9946515b8afd..c07966740e14 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts
@@ -188,6 +188,7 @@
 };
 
 &qspi {
+	status = "okay";
 	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -211,12 +212,12 @@
 
 			qspi_boot: partition@0 {
 				label = "Boot and fpga data";
-				reg = <0x0 0x034B0000>;
+				reg = <0x0 0x03FE0000>;
 			};
 
-			qspi_rootfs: partition@4000000 {
+			qspi_rootfs: partition@3FE0000 {
 				label = "Root Filesystem - JFFS2";
-				reg = <0x034B0000 0x0EB50000>;
+				reg = <0x03FE0000 0x0C020000>;
 			};
 		};
 	};
diff --git a/arch/arm64/boot/dts/al/Makefile b/arch/arm64/boot/dts/amazon/Makefile
index d79822dc30cd..ba9e11544905 100644
--- a/arch/arm64/boot/dts/al/Makefile
+++ b/arch/arm64/boot/dts/amazon/Makefile
@@ -1,2 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0-only
 dtb-$(CONFIG_ARCH_ALPINE)	+= alpine-v2-evp.dtb
+dtb-$(CONFIG_ARCH_ALPINE)	+= alpine-v3-evp.dtb
diff --git a/arch/arm64/boot/dts/al/alpine-v2-evp.dts b/arch/arm64/boot/dts/amazon/alpine-v2-evp.dts
index a079d7b3063e..a079d7b3063e 100644
--- a/arch/arm64/boot/dts/al/alpine-v2-evp.dts
+++ b/arch/arm64/boot/dts/amazon/alpine-v2-evp.dts
diff --git a/arch/arm64/boot/dts/al/alpine-v2.dtsi b/arch/arm64/boot/dts/amazon/alpine-v2.dtsi
index d5e7e2bb4e6c..d5e7e2bb4e6c 100644
--- a/arch/arm64/boot/dts/al/alpine-v2.dtsi
+++ b/arch/arm64/boot/dts/amazon/alpine-v2.dtsi
diff --git a/arch/arm64/boot/dts/amazon/alpine-v3-evp.dts b/arch/arm64/boot/dts/amazon/alpine-v3-evp.dts
new file mode 100644
index 000000000000..48078f5ea545
--- /dev/null
+++ b/arch/arm64/boot/dts/amazon/alpine-v3-evp.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved.
+ */
+
+#include "alpine-v3.dtsi"
+
+/ {
+	model = "Amazon's Annapurna Labs Alpine v3 Evaluation Platform (EVP)";
+	compatible = "amazon,al-alpine-v3-evp", "amazon,al-alpine-v3";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 { status = "okay"; };
diff --git a/arch/arm64/boot/dts/amazon/alpine-v3.dtsi b/arch/arm64/boot/dts/amazon/alpine-v3.dtsi
new file mode 100644
index 000000000000..73a352ea8fd5
--- /dev/null
+++ b/arch/arm64/boot/dts/amazon/alpine-v3.dtsi
@@ -0,0 +1,408 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2020, Amazon.com, Inc. or its affiliates. All Rights Reserved
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "Amazon's Annapurna Labs Alpine v3";
+	compatible = "amazon,al-alpine-v3";
+
+	interrupt-parent = <&gic>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x0>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster0_l2>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x1>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster0_l2>;
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x2>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster0_l2>;
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x3>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster0_l2>;
+		};
+
+		cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x100>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster1_l2>;
+		};
+
+		cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x101>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster1_l2>;
+		};
+
+		cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x102>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster1_l2>;
+		};
+
+		cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x103>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster1_l2>;
+		};
+
+		cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x200>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster2_l2>;
+		};
+
+		cpu@201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x201>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster2_l2>;
+		};
+
+		cpu@202 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x202>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster2_l2>;
+		};
+
+		cpu@203 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x203>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster2_l2>;
+		};
+
+		cpu@300 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x300>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster3_l2>;
+		};
+
+		cpu@301 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x301>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster3_l2>;
+		};
+
+		cpu@302 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x302>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster3_l2>;
+		};
+
+		cpu@303 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0x303>;
+			enable-method = "psci";
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>;
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&cluster3_l2>;
+		};
+
+		cluster0_l2: cache@0 {
+			compatible = "cache";
+			cache-size = <0x200000>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+			cache-level = <2>;
+		};
+
+		cluster1_l2: cache@100 {
+			compatible = "cache";
+			cache-size = <0x200000>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+			cache-level = <2>;
+		};
+
+		cluster2_l2: cache@200 {
+			compatible = "cache";
+			cache-size = <0x200000>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+			cache-level = <2>;
+		};
+
+		cluster3_l2: cache@300 {
+			compatible = "cache";
+			cache-size = <0x200000>;
+			cache-line-size = <64>;
+			cache-sets = <2048>;
+			cache-level = <2>;
+		};
+
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secmon@0 {
+			reg = <0x0 0x0 0x0 0x100000>;
+			no-map;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a72-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@f0000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x0 0xf0800000 0 0x10000>,	/* GICD */
+			      <0x0 0xf0a00000 0 0x200000>,	/* GICR */
+			      <0x0 0xf0000000 0 0x2000>,	/* GICC */
+			      <0x0 0xf0010000 0 0x1000>,	/* GICH */
+			      <0x0 0xf0020000 0 0x2000>;	/* GICV */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pcie@fbd00000 {
+			compatible = "pci-host-ecam-generic";
+			device_type = "pci";
+			#size-cells = <2>;
+			#address-cells = <3>;
+			#interrupt-cells = <1>;
+			reg = <0x0 0xfbd00000 0x0 0x100000>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			/* 8 x legacy interrupts for SATA only */
+			interrupt-map = <0x4000 0 0 1 &gic 0 57 IRQ_TYPE_LEVEL_HIGH>,
+					<0x4800 0 0 1 &gic 0 58 IRQ_TYPE_LEVEL_HIGH>,
+					<0x5000 0 0 1 &gic 0 59 IRQ_TYPE_LEVEL_HIGH>,
+					<0x5800 0 0 1 &gic 0 60 IRQ_TYPE_LEVEL_HIGH>,
+					<0x6000 0 0 1 &gic 0 61 IRQ_TYPE_LEVEL_HIGH>,
+					<0x6800 0 0 1 &gic 0 62 IRQ_TYPE_LEVEL_HIGH>,
+					<0x7000 0 0 1 &gic 0 63 IRQ_TYPE_LEVEL_HIGH>,
+					<0x7800 0 0 1 &gic 0 64 IRQ_TYPE_LEVEL_HIGH>;
+			ranges = <0x02000000 0x0 0xfe000000 0x0 0xfe000000 0x0 0x1000000>;
+			bus-range = <0x00 0x00>;
+			msi-parent = <&msix>;
+		};
+
+		msix: msix@fbe00000 {
+			compatible = "al,alpine-msix";
+			reg = <0x0 0xfbe00000 0x0 0x100000>;
+			interrupt-controller;
+			msi-controller;
+			al,msi-base-spi = <336>;
+			al,msi-num-spis = <959>;
+			interrupt-parent = <&gic>;
+		};
+
+		io-fabric {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0xfc000000 0x2000000>;
+
+			uart0: serial@1883000 {
+				compatible = "ns16550a";
+				reg = <0x1883000 0x1000>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <0>; /* Filled by firmware */
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				status = "disabled";
+			};
+
+			uart1: serial@1884000 {
+				compatible = "ns16550a";
+				reg = <0x1884000 0x1000>;
+				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <0>; /* Filled by firmware */
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				status = "disabled";
+			};
+
+			uart2: serial@1885000 {
+				compatible = "ns16550a";
+				reg = <0x1885000 0x1000>;
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <0>; /* Filled by firmware */
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				status = "disabled";
+			};
+
+			uart3: serial@1886000 {
+				compatible = "ns16550a";
+				reg = <0x1886000 0x1000>;
+				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <0>; /* Filled by firmware */
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 5cac4d1d487d..4e2239ffcaa5 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -41,6 +41,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-libretech-pc.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxm-wetek-core2.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-c4.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index 8e6281c685fa..b9efc8469265 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -181,8 +181,10 @@
 			interrupt-names = "macirq";
 			clocks = <&clkc CLKID_ETH>,
 				 <&clkc CLKID_FCLK_DIV2>,
-				 <&clkc CLKID_MPLL2>;
-			clock-names = "stmmaceth", "clkin0", "clkin1";
+				 <&clkc CLKID_MPLL2>,
+				 <&clkc CLKID_FCLK_DIV2>;
+			clock-names = "stmmaceth", "clkin0", "clkin1",
+				      "timing-adjustment";
 			rx-fifo-depth = <4096>;
 			tx-fifo-depth = <2048>;
 			status = "disabled";
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 593a006f4b7b..1e83ec5b8c91 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -52,6 +52,39 @@
 		secure-monitor = <&sm>;
 	};
 
+	gpu_opp_table: gpu-opp-table {
+		compatible = "operating-points-v2";
+
+		opp-124999998 {
+			opp-hz = /bits/ 64 <124999998>;
+			opp-microvolt = <800000>;
+		};
+		opp-249999996 {
+			opp-hz = /bits/ 64 <249999996>;
+			opp-microvolt = <800000>;
+		};
+		opp-285714281 {
+			opp-hz = /bits/ 64 <285714281>;
+			opp-microvolt = <800000>;
+		};
+		opp-399999994 {
+			opp-hz = /bits/ 64 <399999994>;
+			opp-microvolt = <800000>;
+		};
+		opp-499999992 {
+			opp-hz = /bits/ 64 <499999992>;
+			opp-microvolt = <800000>;
+		};
+		opp-666666656 {
+			opp-hz = /bits/ 64 <666666656>;
+			opp-microvolt = <800000>;
+		};
+		opp-799999987 {
+			opp-hz = /bits/ 64 <799999987>;
+			opp-microvolt = <800000>;
+		};
+	};
+
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
@@ -185,8 +218,10 @@
 			interrupt-names = "macirq";
 			clocks = <&clkc CLKID_ETH>,
 				 <&clkc CLKID_FCLK_DIV2>,
-				 <&clkc CLKID_MPLL2>;
-			clock-names = "stmmaceth", "clkin0", "clkin1";
+				 <&clkc CLKID_MPLL2>,
+				 <&clkc CLKID_FCLK_DIV2>;
+			clock-names = "stmmaceth", "clkin0", "clkin1",
+				      "timing-adjustment";
 			rx-fifo-depth = <4096>;
 			tx-fifo-depth = <2048>;
 			status = "disabled";
@@ -2360,21 +2395,7 @@
 			interrupt-names = "job", "mmu", "gpu";
 			clocks = <&clkc CLKID_MALI>;
 			resets = <&reset RESET_DVALIN_CAPB3>, <&reset RESET_DVALIN>;
-
-			/*
-			 * Mali clocking is provided by two identical clock paths
-			 * MALI_0 and MALI_1 muxed to a single clock by a glitch
-			 * free mux to safely change frequency while running.
-			 */
-			assigned-clocks = <&clkc CLKID_MALI_0_SEL>,
-					  <&clkc CLKID_MALI_0>,
-					  <&clkc CLKID_MALI>; /* Glitch free mux */
-			assigned-clock-parents = <&clkc CLKID_FCLK_DIV2P5>,
-						 <0>, /* Do Nothing */
-						 <&clkc CLKID_MALI_0>;
-			assigned-clock-rates = <0>, /* Do Nothing */
-					       <800000000>,
-					       <0>; /* Do Nothing */
+			operating-points-v2 = <&gpu_opp_table>;
 			#cooling-cells = <2>;
 		};
 	};
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
index 169ea283d4ee..34fffa6d859d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
@@ -9,6 +9,7 @@
 #include "meson-g12b-s922x.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/sound/meson-g12a-toacodec.h>
 #include <dt-bindings/sound/meson-g12a-tohdmitx.h>
 
 / {
@@ -20,6 +21,14 @@
 		ethernet0 = &ethmac;
 	};
 
+	dioo2133: audio-amplifier-0 {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
+		VCC-supply = <&vcc_5v>;
+		sound-name-prefix = "U19";
+		status = "okay";
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
@@ -209,11 +218,42 @@
 	sound {
 		compatible = "amlogic,axg-sound-card";
 		model = "G12B-ODROID-N2";
-		audio-aux-devs = <&tdmout_b>;
+		audio-widgets = "Line", "Lineout";
+		audio-aux-devs = <&tdmout_b>, <&tdmout_c>, <&tdmin_a>,
+				 <&tdmin_b>, <&tdmin_c>, <&tdmin_lb>,
+				 <&dioo2133>;
 		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
 				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
-				"TDM_B Playback", "TDMOUT_B OUT";
+				"TDM_B Playback", "TDMOUT_B OUT",
+				"TDMOUT_C IN 0", "FRDDR_A OUT 2",
+				"TDMOUT_C IN 1", "FRDDR_B OUT 2",
+				"TDMOUT_C IN 2", "FRDDR_C OUT 2",
+				"TDM_C Playback", "TDMOUT_C OUT",
+				"TDMIN_A IN 4", "TDM_B Loopback",
+				"TDMIN_B IN 4", "TDM_B Loopback",
+				"TDMIN_C IN 4", "TDM_B Loopback",
+				"TDMIN_LB IN 1", "TDM_B Loopback",
+				"TDMIN_A IN 5", "TDM_C Loopback",
+				"TDMIN_B IN 5", "TDM_C Loopback",
+				"TDMIN_C IN 5", "TDM_C Loopback",
+				"TDMIN_LB IN 2", "TDM_C Loopback",
+				"TODDR_A IN 0", "TDMIN_A OUT",
+				"TODDR_B IN 0", "TDMIN_A OUT",
+				"TODDR_C IN 0", "TDMIN_A OUT",
+				"TODDR_A IN 1", "TDMIN_B OUT",
+				"TODDR_B IN 1", "TDMIN_B OUT",
+				"TODDR_C IN 1", "TDMIN_B OUT",
+				"TODDR_A IN 2", "TDMIN_C OUT",
+				"TODDR_B IN 2", "TDMIN_C OUT",
+				"TODDR_C IN 2", "TDMIN_C OUT",
+				"TODDR_A IN 6", "TDMIN_LB OUT",
+				"TODDR_B IN 6", "TDMIN_LB OUT",
+				"TODDR_C IN 6", "TDMIN_LB OUT",
+				"U19 INL", "ACODEC LOLP",
+				"U19 INR", "ACODEC LORP",
+				"Lineout", "U19 OUTL",
+				"Lineout", "U19 OUTR";
 
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
@@ -236,8 +276,20 @@
 			sound-dai = <&frddr_c>;
 		};
 
-		/* 8ch hdmi interface */
 		dai-link-3 {
+			sound-dai = <&toddr_a>;
+		};
+
+		dai-link-4 {
+			sound-dai = <&toddr_b>;
+		};
+
+		dai-link-5 {
+			sound-dai = <&toddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-6 {
 			sound-dai = <&tdmif_b>;
 			dai-format = "i2s";
 			dai-tdm-slot-tx-mask-0 = <1 1>;
@@ -246,22 +298,56 @@
 			dai-tdm-slot-tx-mask-3 = <1 1>;
 			mclk-fs = <256>;
 
-			codec {
+			codec-0 {
 				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
 			};
+
+			codec-1 {
+				sound-dai = <&toacodec TOACODEC_IN_B>;
+			};
+		};
+
+		/* i2s jack output interface */
+		dai-link-7 {
+			sound-dai = <&tdmif_c>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			mclk-fs = <256>;
+
+			codec-0 {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_C>;
+			};
+
+			codec-1 {
+				sound-dai = <&toacodec TOACODEC_IN_C>;
+			};
 		};
 
 		/* hdmi glue */
-		dai-link-4 {
+		dai-link-8 {
 			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
 
 			codec {
 				sound-dai = <&hdmi_tx>;
 			};
 		};
+
+		/* acodec glue */
+		dai-link-9 {
+			sound-dai = <&toacodec TOACODEC_OUT>;
+
+			codec {
+				sound-dai = <&acodec>;
+			};
+		};
 	};
 };
 
+&acodec {
+	AVDD-supply = <&vddao_1v8>;
+	status = "okay";
+};
+
 &arb {
 	status = "okay";
 };
@@ -476,14 +562,54 @@
 	status = "okay";
 };
 
+&tdmif_c {
+	status = "okay";
+};
+
+&tdmin_a {
+	status = "okay";
+};
+
+&tdmin_b {
+	status = "okay";
+};
+
+&tdmin_c {
+	status = "okay";
+};
+
+&tdmin_lb {
+	status = "okay";
+};
+
 &tdmout_b {
 	status = "okay";
 };
 
+&tdmout_c {
+	status = "okay";
+};
+
+&toacodec {
+	status = "okay";
+};
+
 &tohdmitx {
 	status = "okay";
 };
 
+&toddr_a {
+	status = "okay";
+};
+
+&toddr_b {
+	status = "okay";
+};
+
+&toddr_c {
+	status = "okay";
+};
+
 &uart_AO {
 	status = "okay";
 	pinctrl-0 = <&uart_ao_a_pins>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi
index 98b70d216a6f..2802ddbb83ac 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi
@@ -336,9 +336,11 @@
 
 	bus-width = <4>;
 	cap-sd-highspeed;
-	sd-uhs-sdr50;
 	max-frequency = <100000000>;
 
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
 	non-removable;
 	disable-wp;
 
@@ -398,7 +400,7 @@
 		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
 		max-speed = <2000000>;
 		clocks = <&wifi32k>;
-	clock-names = "lpo";
+		clock-names = "lpo";
 	};
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-mali450.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-mali450.dtsi
new file mode 100644
index 000000000000..f9771b51c852
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gx-mali450.dtsi
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 BayLibre SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+/ {
+	gpu_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-125000000 {
+			opp-hz = /bits/ 64 <125000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-285714285 {
+			opp-hz = /bits/ 64 <285714285>;
+			opp-microvolt = <950000>;
+		};
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-666666666 {
+			opp-hz = /bits/ 64 <666666666>;
+			opp-microvolt = <950000>;
+		};
+		opp-744000000 {
+			opp-hz = /bits/ 64 <744000000>;
+			opp-microvolt = <950000>;
+		};
+	};
+};
+
+&apb {
+	mali: gpu@c0000 {
+		compatible = "arm,mali-450";
+		reg = <0x0 0xc0000 0x0 0x40000>;
+		interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "gp", "gpmmu", "pp", "pmu",
+			"pp0", "ppmmu0", "pp1", "ppmmu1",
+			"pp2", "ppmmu2";
+		operating-points-v2 = <&gpu_opp_table>;
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index ba63c36b22e0..0edd137151f8 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -12,6 +12,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/meson-gxbb-power.h>
 #include <dt-bindings/thermal/thermal.h>
 
 / {
@@ -60,7 +61,7 @@
 			compatible = "amlogic,simple-framebuffer",
 				     "simple-framebuffer";
 			amlogic,pipeline = "vpu-cvbs";
-			power-domains = <&pwrc_vpu>;
+			power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
 			status = "disabled";
 		};
 
@@ -68,7 +69,7 @@
 			compatible = "amlogic,simple-framebuffer",
 				     "simple-framebuffer";
 			amlogic,pipeline = "vpu-hdmi";
-			power-domains = <&pwrc_vpu>;
+			power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
 			status = "disabled";
 		};
 	};
@@ -438,12 +439,6 @@
 				compatible = "amlogic,meson-gx-ao-sysctrl", "simple-mfd", "syscon";
 				reg =  <0x0 0x0 0x0 0x100>;
 
-				pwrc_vpu: power-controller-vpu {
-					compatible = "amlogic,meson-gx-pwrc-vpu";
-					#power-domain-cells = <0>;
-					amlogic,hhi-sysctrl = <&sysctrl>;
-				};
-
 				clkc_AO: clock-controller {
 					compatible = "amlogic,meson-gx-aoclkc";
 					#clock-cells = <1>;
@@ -552,6 +547,12 @@
 			sysctrl: system-controller@0 {
 				compatible = "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon";
 				reg = <0 0 0 0x400>;
+
+				pwrc: power-controller {
+					compatible = "amlogic,meson-gxbb-pwrc";
+					#power-domain-cells = <1>;
+					amlogic,ao-sysctrl = <&sysctrl_AO>;
+				};
 			};
 
 			mailbox: mailbox@404 {
@@ -574,6 +575,7 @@
 			interrupt-names = "macirq";
 			rx-fifo-depth = <4096>;
 			tx-fifo-depth = <2048>;
+			power-domains = <&pwrc PWRC_GXBB_ETHERNET_MEM_ID>;
 			status = "disabled";
 		};
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 234490d3ee68..7c029f552a23 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include "meson-gx.dtsi"
+#include "meson-gx-mali450.dtsi"
 #include <dt-bindings/gpio/meson-gxbb-gpio.h>
 #include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
 #include <dt-bindings/clock/gxbb-clkc.h>
@@ -264,46 +265,6 @@
 	};
 };
 
-&apb {
-	mali: gpu@c0000 {
-		compatible = "amlogic,meson-gxbb-mali", "arm,mali-450";
-		reg = <0x0 0xc0000 0x0 0x40000>;
-		interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "gp", "gpmmu", "pp", "pmu",
-			"pp0", "ppmmu0", "pp1", "ppmmu1",
-			"pp2", "ppmmu2";
-		clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
-		clock-names = "bus", "core";
-
-		/*
-		 * Mali clocking is provided by two identical clock paths
-		 * MALI_0 and MALI_1 muxed to a single clock by a glitch
-		 * free mux to safely change frequency while running.
-		 */
-		assigned-clocks = <&clkc CLKID_GP0_PLL>,
-				  <&clkc CLKID_MALI_0_SEL>,
-				  <&clkc CLKID_MALI_0>,
-				  <&clkc CLKID_MALI>; /* Glitch free mux */
-		assigned-clock-parents = <0>, /* Do Nothing */
-					 <&clkc CLKID_GP0_PLL>,
-					 <0>, /* Do Nothing */
-					 <&clkc CLKID_MALI_0>;
-		assigned-clock-rates = <744000000>,
-				       <0>, /* Do Nothing */
-				       <744000000>,
-				       <0>; /* Do Nothing */
-	};
-};
-
 &cbus {
 	spifc: spi@8c80 {
 		compatible = "amlogic,meson-gxbb-spifc";
@@ -333,8 +294,9 @@
 &ethmac {
 	clocks = <&clkc CLKID_ETH>,
 		 <&clkc CLKID_FCLK_DIV2>,
-		 <&clkc CLKID_MPLL2>;
-	clock-names = "stmmaceth", "clkin0", "clkin1";
+		 <&clkc CLKID_MPLL2>,
+		 <&clkc CLKID_FCLK_DIV2>;
+	clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment";
 };
 
 &gpio_intc {
@@ -385,6 +347,16 @@
 	clocks = <&clkc CLKID_I2C>;
 };
 
+&mali {
+	compatible = "amlogic,meson-gxbb-mali", "arm,mali-450";
+
+	clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
+	clock-names = "bus", "core";
+
+	assigned-clocks = <&clkc CLKID_GP0_PLL>;
+	assigned-clock-rates = <744000000>;
+};
+
 &periphs {
 	pinctrl_periphs: pinctrl@4b0 {
 		compatible = "amlogic,meson-gxbb-periphs-pinctrl";
@@ -747,7 +719,7 @@
 	};
 };
 
-&pwrc_vpu {
+&pwrc {
 	resets = <&reset RESET_VIU>,
 		 <&reset RESET_VENC>,
 		 <&reset RESET_VCBUS>,
@@ -760,6 +732,9 @@
 		 <&reset RESET_VDI6>,
 		 <&reset RESET_VENCL>,
 		 <&reset RESET_VID_LOCK>;
+	reset-names = "viu", "venc", "vcbus", "bt656",
+		      "dvin", "rdma", "venci", "vencp",
+		      "vdac", "vdi6", "vencl", "vid_lock";
 	clocks = <&clkc CLKID_VPU>,
 	         <&clkc CLKID_VAPB>;
 	clock-names = "vpu", "vapb";
@@ -866,7 +841,7 @@
 
 &vpu {
 	compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu";
-	power-domains = <&pwrc_vpu>;
+	power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
 };
 
 &vdec {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi
index 6aaafff674f9..478e755cc87c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi
@@ -4,42 +4,14 @@
  * Author: Neil Armstrong <narmstrong@baylibre.com>
  */
 
-&apb {
-	mali: gpu@c0000 {
-		compatible = "amlogic,meson-gxl-mali", "arm,mali-450";
-		reg = <0x0 0xc0000 0x0 0x40000>;
-		interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "gp", "gpmmu", "pp", "pmu",
-			"pp0", "ppmmu0", "pp1", "ppmmu1",
-			"pp2", "ppmmu2";
-		clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
-		clock-names = "bus", "core";
+#include "meson-gx-mali450.dtsi"
 
-		/*
-		 * Mali clocking is provided by two identical clock paths
-		 * MALI_0 and MALI_1 muxed to a single clock by a glitch
-		 * free mux to safely change frequency while running.
-		 */
-		assigned-clocks = <&clkc CLKID_GP0_PLL>,
-				  <&clkc CLKID_MALI_0_SEL>,
-				  <&clkc CLKID_MALI_0>,
-				  <&clkc CLKID_MALI>; /* Glitch free mux */
-		assigned-clock-parents = <0>, /* Do Nothing */
-					 <&clkc CLKID_GP0_PLL>,
-					 <0>, /* Do Nothing */
-					 <&clkc CLKID_MALI_0>;
-		assigned-clock-rates = <744000000>,
-				       <0>, /* Do Nothing */
-				       <744000000>,
-				       <0>; /* Do Nothing */
-	};
+&mali {
+	compatible = "amlogic,meson-gxl-mali", "arm,mali-450";
+
+	clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
+	clock-names = "bus", "core";
+
+	assigned-clocks = <&clkc CLKID_GP0_PLL>;
+	assigned-clock-rates = <744000000>;
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts
index 6a226faab183..9e43f4dca90d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts
@@ -10,7 +10,7 @@
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/sound/meson-aiu.h>
 
-#include "meson-gxl-s905x.dtsi"
+#include "meson-gxl-s805x.dtsi"
 
 / {
 	compatible = "libretech,aml-s805x-ac", "amlogic,s805x",
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts
index 867e30f1d62b..eb7f5a3fefd4 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts
@@ -9,7 +9,7 @@
 
 #include <dt-bindings/input/input.h>
 
-#include "meson-gxl-s905x.dtsi"
+#include "meson-gxl-s805x.dtsi"
 
 / {
 	compatible = "amlogic,p241", "amlogic,s805x", "amlogic,meson-gxl";
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s805x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x.dtsi
new file mode 100644
index 000000000000..29975849822c
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s805x.dtsi
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 BayLibre SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+#include "meson-gxl-s905x.dtsi"
+
+/ {
+	compatible = "amlogic,s805x", "amlogic,meson-gxl";
+};
+
+/* The S805X Package doesn't seem to handle the 744MHz OPP correctly */
+&gpu_opp_table {
+	opp-744000000 {
+		status = "disabled";
+	};
+};
+
+&mali {
+	/delete-property/ assigned-clocks;
+	/delete-property/ assigned-clock-rates;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index fc59c8534c0f..c3ac531c4f84 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -131,8 +131,9 @@
 &ethmac {
 	clocks = <&clkc CLKID_ETH>,
 		 <&clkc CLKID_FCLK_DIV2>,
-		 <&clkc CLKID_MPLL2>;
-	clock-names = "stmmaceth", "clkin0", "clkin1";
+		 <&clkc CLKID_MPLL2>,
+		 <&clkc CLKID_FCLK_DIV2>;
+	clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment";
 
 	mdio0: mdio {
 		#address-cells = <1>;
@@ -337,6 +338,11 @@
 	};
 };
 
+&hwrng {
+	clocks = <&clkc CLKID_RNG0>;
+	clock-names = "core";
+};
+
 &i2c_A {
 	clocks = <&clkc CLKID_I2C>;
 };
@@ -782,7 +788,7 @@
 	};
 };
 
-&pwrc_vpu {
+&pwrc {
 	resets = <&reset RESET_VIU>,
 		 <&reset RESET_VENC>,
 		 <&reset RESET_VCBUS>,
@@ -795,6 +801,9 @@
 		 <&reset RESET_VDI6>,
 		 <&reset RESET_VENCL>,
 		 <&reset RESET_VID_LOCK>;
+	reset-names = "viu", "venc", "vcbus", "bt656",
+		      "dvin", "rdma", "venci", "vencp",
+		      "vdac", "vdi6", "vencl", "vid_lock";
 	clocks = <&clkc CLKID_VPU>,
 	         <&clkc CLKID_VAPB>;
 	clock-names = "vpu", "vapb";
@@ -901,7 +910,7 @@
 
 &vpu {
 	compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu";
-	power-domains = <&pwrc_vpu>;
+	power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
 };
 
 &vdec {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dts
new file mode 100644
index 000000000000..ec794c134c15
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-wetek-core2.dts
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxm.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "wetek,core2", "amlogic,s912", "amlogic,meson-gxm";
+	model = "WeTek Core 2";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>; /* 2 GiB or 3 GiB */
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		blue {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1710000>;
+
+		button-update {
+			label = "update";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <10000>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		button-power {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+/* Disabled as Realtek RTL8152 USB provides Ethernet */
+&ethmac {
+	status = "disabled";
+};
+
+&internal_phy {
+	status = "disabled";
+};
+
+&ir {
+	linux,rc-map-name = "rc-wetek-play2";
+};
+
+/* This is connected to the Bluetooth module: */
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
index 40e3e123e05b..fe4145112295 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
@@ -82,6 +82,35 @@
 			#cooling-cells = <2>;
 		};
 	};
+
+	gpu_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-125000000 {
+			opp-hz = /bits/ 64 <125000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-285714285 {
+			opp-hz = /bits/ 64 <285714285>;
+			opp-microvolt = <950000>;
+		};
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-666666666 {
+			opp-hz = /bits/ 64 <666666666>;
+			opp-microvolt = <950000>;
+		};
+	};
 };
 
 &apb {
@@ -106,21 +135,7 @@
 		interrupt-names = "job", "mmu", "gpu";
 		clocks = <&clkc CLKID_MALI>;
 		resets = <&reset RESET_MALI_CAPB3>, <&reset RESET_MALI>;
-
-		/*
-		 * Mali clocking is provided by two identical clock paths
-		 * MALI_0 and MALI_1 muxed to a single clock by a glitch
-		 * free mux to safely change frequency while running.
-		 */
-		assigned-clocks = <&clkc CLKID_MALI_0_SEL>,
-				  <&clkc CLKID_MALI_0>,
-				  <&clkc CLKID_MALI>; /* Glitch free mux */
-		assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
-					 <0>, /* Do Nothing */
-					 <&clkc CLKID_MALI_0>;
-		assigned-clock-rates = <0>, /* Do Nothing */
-				       <666666666>,
-				       <0>; /* Do Nothing */
+		operating-points-v2 = <&gpu_opp_table>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
index 1ef1e3672b96..94f75b446504 100644
--- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
@@ -183,6 +183,23 @@
 	hdmi-phandle = <&hdmi_tx>;
 };
 
+&cpu_thermal {
+	trips {
+		cpu_active: cpu-active {
+			temperature = <80000>; /* millicelsius */
+			hysteresis = <2000>; /* millicelsius */
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map {
+			trip = <&cpu_active>;
+			cooling-device = <&khadas_mcu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+		};
+	};
+};
+
 &ext_mdio {
 	external_phy: ethernet-phy@0 {
 		/* Realtek RTL8211F (0x001cc916) */
@@ -222,6 +239,12 @@
 	pinctrl-0 = <&i2c_ao_sck_pins>, <&i2c_ao_sda_pins>;
 	pinctrl-names = "default";
 
+	khadas_mcu: system-controller@18 {
+		compatible = "khadas,mcu";
+		reg = <0x18>;
+		#cooling-cells = <2>;
+	};
+
 	gpio_expander: gpio-controller@20 {
 		compatible = "ti,tca6408";
 		reg = <0x20>;
@@ -270,7 +293,6 @@
 
 	bus-width = <4>;
 	cap-sd-highspeed;
-	sd-uhs-sdr50;
 	max-frequency = <100000000>;
 
 	non-removable;
@@ -337,7 +359,7 @@
 	pinctrl-0 = <&nor_pins>;
 	pinctrl-names = "default";
 
-	w25q32: spi-flash@0 {
+	w25q128: spi-flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "winbond,w25q128fw", "jedec,spi-nor";
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
index dbbf29a0dbf6..0da56c051a0e 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts
@@ -8,6 +8,7 @@
 
 #include "meson-sm1.dtsi"
 #include "meson-khadas-vim3.dtsi"
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
 
 / {
 	compatible = "khadas,vim3l", "amlogic,sm1";
@@ -31,6 +32,69 @@
 		regulator-boot-on;
 		regulator-always-on;
 	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "SM1-KHADAS-VIM3L";
+		audio-aux-devs = <&tdmout_a>;
+		audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
+				"TDMOUT_A IN 1", "FRDDR_B OUT 0",
+				"TDMOUT_A IN 2", "FRDDR_C OUT 0",
+				"TDM_A Playback", "TDMOUT_A OUT";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+		status = "okay";
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_a>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-4 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&clkc_audio {
+	status = "okay";
 };
 
 &cpu0 {
@@ -61,6 +125,18 @@
 	clock-latency = <50000>;
 };
 
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
 &pwm_AO_cd {
 	pinctrl-0 = <&pwm_ao_d_e_pins>;
 	pinctrl-names = "default";
@@ -88,8 +164,24 @@
 	status = "okay";
 };
 
+&sd_emmc_a {
+	sd-uhs-sdr50;
+};
+
 &usb {
 	phys = <&usb2_phy0>, <&usb2_phy1>;
 	phy-names = "usb2-phy0", "usb2-phy1";
 };
  */
+
+&tdmif_a {
+	status = "okay";
+};
+
+&tdmout_a {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
index 00d90b30f8b4..cf5a98f0e47c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
@@ -8,6 +8,7 @@
 #include "meson-sm1.dtsi"
 #include <dt-bindings/gpio/meson-g12a-gpio.h>
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
 
 / {
 	compatible = "hardkernel,odroid-c4", "amlogic,sm1";
@@ -186,6 +187,69 @@
 			};
 		};
 	};
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "SM1-ODROID-C4";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+		status = "okay";
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-4 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&clkc_audio {
+	status = "okay";
 };
 
 &cpu0 {
@@ -237,6 +301,18 @@
 	amlogic,tx-delay-ns = <2>;
 };
 
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
 &gpio {
 	gpio-line-names =
 		/* GPIOZ */
@@ -381,6 +457,18 @@
 	vqmmc-supply = <&flash_1v8>;
 };
 
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
+
 &uart_AO {
 	status = "okay";
 	pinctrl-0 = <&uart_ao_a_pins>;
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index 6721966140f4..74ac4ac75865 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -24,7 +24,7 @@
 	interrupt-parent = <&gic>;
 
 	arm_a53_pmu {
-		compatible = "arm,cortex-a53-pmu", "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a53-pmu";
 		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
@@ -33,7 +33,7 @@
 	};
 
 	arm_a57_pmu {
-		compatible = "arm,cortex-a57-pmu", "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a57-pmu";
 		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
@@ -256,7 +256,7 @@
 		cpu_on = <0xC4000003>;
 	};
 
-	soc: soc {
+	soc: soc@0 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1756,33 +1756,26 @@
 			status = "disabled";
 		};
 
-		amba {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			pdma0: pdma@15610000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0x15610000 0x1000>;
-				interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&cmu_fsys CLK_PDMA0>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-			};
-
-			pdma1: pdma@15600000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0x15600000 0x1000>;
-				interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&cmu_fsys CLK_PDMA1>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-			};
+		pdma0: pdma@15610000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x15610000 0x1000>;
+			interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_fsys CLK_PDMA0>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
+		};
+
+		pdma1: pdma@15600000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x15600000 0x1000>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_fsys CLK_PDMA1>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
 		};
 
 		audio-subsystem@11400000 {
diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
index 7af288fa9475..92fecc539c6c 100644
--- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
+++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
@@ -157,6 +157,7 @@
 				regulator-min-microvolt = <700000>;
 				regulator-max-microvolt = <1150000>;
 				regulator-enable-ramp-delay = <125>;
+				regulator-always-on;
 			};
 
 			ldo8_reg: LDO8 {
@@ -193,6 +194,7 @@
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <1300000>;
 				regulator-enable-ramp-delay = <125>;
+				regulator-always-on;
 			};
 
 			ldo13_reg: LDO13 {
@@ -406,6 +408,10 @@
 	};
 };
 
+&ufs {
+	status = "okay";
+};
+
 &usbdrd_phy {
 	vbus-supply = <&usb30_vbus_reg>;
 	vbus-boost-supply = <&usb3drd_boost_5v>;
diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
index 5558045637ac..b9ed6a33e290 100644
--- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -29,7 +29,7 @@
 	};
 
 	arm-pmu {
-		compatible = "arm,cortex-a57-pmu", "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a57-pmu";
 		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
@@ -83,7 +83,7 @@
 		method = "smc";
 	};
 
-	soc: soc {
+	soc: soc@0 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -105,33 +105,26 @@
 				<0x11006000 0x2000>;
 		};
 
-		amba {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			pdma0: pdma@10e10000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0x10E10000 0x1000>;
-				interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clock_fsys0 ACLK_PDMA0>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-			};
+		pdma0: pdma@10e10000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x10E10000 0x1000>;
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock_fsys0 ACLK_PDMA0>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
+		};
 
-			pdma1: pdma@10eb0000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0x10EB0000 0x1000>;
-				interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clock_fsys0 ACLK_PDMA1>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-			};
+		pdma1: pdma@10eb0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x10EB0000 0x1000>;
+			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock_fsys0 ACLK_PDMA1>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
 		};
 
 		clock_topc: clock-controller@10570000 {
@@ -220,9 +213,14 @@
 			#clock-cells = <1>;
 			clocks = <&fin_pll>, <&clock_top1 DOUT_ACLK_FSYS1_200>,
 				 <&clock_top1 DOUT_SCLK_MMC0>,
-				 <&clock_top1 DOUT_SCLK_MMC1>;
+				 <&clock_top1 DOUT_SCLK_MMC1>,
+				 <&clock_top1 DOUT_SCLK_UFSUNIPRO20>,
+				 <&clock_top1 DOUT_SCLK_PHY_FSYS1>,
+				 <&clock_top1 DOUT_SCLK_PHY_FSYS1_26M>;
 			clock-names = "fin_pll", "dout_aclk_fsys1_200",
-				      "dout_sclk_mmc0", "dout_sclk_mmc1";
+				      "dout_sclk_mmc0", "dout_sclk_mmc1",
+				      "dout_sclk_ufsunipro20", "dout_sclk_phy_fsys1",
+				      "dout_sclk_phy_fsys1_26m";
 		};
 
 		serial_0: serial@13630000 {
@@ -576,6 +574,11 @@
 		pwm: pwm@136c0000 {
 			compatible = "samsung,exynos4210-pwm";
 			reg = <0x136c0000 0x100>;
+			interrupts = <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>;
 			samsung,pwm-outputs = <0>, <1>, <2>, <3>;
 			#pwm-cells = <3>;
 			clocks = <&clock_peric0 PCLK_PWM>;
@@ -592,13 +595,38 @@
 			#thermal-sensor-cells = <0>;
 		};
 
-		thermal-zones {
-			atlas_thermal: cluster0-thermal {
-				polling-delay-passive = <0>; /* milliseconds */
-				polling-delay = <0>; /* milliseconds */
-				thermal-sensors = <&tmuctrl_0>;
-				#include "exynos7-trip-points.dtsi"
-			};
+		ufs: ufs@15570000 {
+			compatible = "samsung,exynos7-ufs";
+			reg = <0x15570000 0x100>,  /* 0: HCI standard */
+				<0x15570100 0x100>,  /* 1: Vendor specificed */
+				<0x15571000 0x200>,  /* 2: UNIPRO */
+				<0x15572000 0x300>;  /* 3: UFS protector */
+			reg-names = "hci", "vs_hci", "unipro", "ufsp";
+			interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock_fsys1 ACLK_UFS20_LINK>,
+				<&clock_fsys1 SCLK_UFSUNIPRO20_USER>;
+			clock-names = "core_clk", "sclk_unipro_main";
+			freq-table-hz = <0 0>, <0 0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&ufs_rst_n &ufs_refclk_out>;
+			phys = <&ufs_phy>;
+			phy-names = "ufs-phy";
+			status = "disabled";
+		};
+
+		ufs_phy: ufs-phy@15571800 {
+			compatible = "samsung,exynos7-ufs-phy";
+			reg = <0x15571800 0x240>;
+			reg-names = "phy-pma";
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			#phy-cells = <0>;
+			clocks = <&clock_fsys1 SCLK_COMBO_PHY_EMBEDDED_26M>,
+				 <&clock_fsys1 PHYCLK_UFS20_RX1_SYMBOL_USER>,
+				 <&clock_fsys1 PHYCLK_UFS20_RX0_SYMBOL_USER>,
+				 <&clock_fsys1 PHYCLK_UFS20_TX0_SYMBOL_USER>;
+			clock-names = "ref_clk", "rx1_symbol_clk",
+				      "rx0_symbol_clk",
+				      "tx0_symbol_clk";
 		};
 
 		usbdrd_phy: phy@15500000 {
@@ -636,6 +664,15 @@
 		};
 	};
 
+	thermal-zones {
+		atlas_thermal: cluster0-thermal {
+			polling-delay-passive = <0>; /* milliseconds */
+			polling-delay = <0>; /* milliseconds */
+			thermal-sensors = <&tmuctrl_0>;
+			#include "exynos7-trip-points.dtsi"
+		};
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index 006e544d1fdb..ff19ec415b60 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -17,6 +17,7 @@
 
 	aliases {
 		crypto = &crypto;
+		rtc1 = &ftm_alarm0;
 		rtic-a = &rtic_a;
 		rtic-b = &rtic_b;
 		rtic-c = &rtic_c;
@@ -512,6 +513,20 @@
 					<0000 0 0 4 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
+
+		rcpm: power-controller@1ee2140 {
+			compatible = "fsl,ls1012a-rcpm", "fsl,qoriq-rcpm-2.1+";
+			reg = <0x0 0x1ee2140 0x0 0x4>;
+			#fsl,rcpm-wakeup-cells = <1>;
+		};
+
+		ftm_alarm0: timer@29d0000 {
+			compatible = "fsl,ls1012a-ftm-alarm";
+			reg = <0x0 0x29d0000 0x0 0x10000>;
+			fsl,rcpm-wakeup = <&rcpm 0x20000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			big-endian;
+		};
 	};
 
 	firmware {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
index dd69c5b821e9..e4f00c2b6608 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -107,6 +107,91 @@
 	};
 };
 
+&dspi0 {
+	bus-num = <0>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+	};
+
+	flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		reg = <1>;
+		spi-max-frequency = <10000000>;
+	};
+
+	flash@2 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		reg = <2>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+&dspi1 {
+	bus-num = <1>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+	};
+
+	flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		reg = <1>;
+		spi-max-frequency = <10000000>;
+	};
+
+	flash@2 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		reg = <2>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+&dspi2 {
+	bus-num = <2>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
 &duart0 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 055f114cf848..0efeb8fa773e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -17,6 +17,10 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		rtc1 = &ftm_alarm0;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -129,12 +133,32 @@
 	};
 
 	thermal-zones {
-		core-cluster {
+		ddr-controller {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 0>;
 
 			trips {
+				ddr-ctrler-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				ddr-ctrler-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		core-cluster {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 1>;
+
+			trips {
 				core_cluster_alert: core-cluster-alert {
 					temperature = <85000>;
 					hysteresis = <2000>;
@@ -983,6 +1007,19 @@
 				};
 			};
 		};
+
+		rcpm: power-controller@1e34040 {
+			compatible = "fsl,ls1028a-rcpm", "fsl,qoriq-rcpm-2.1+";
+			reg = <0x0 0x1e34040 0x0 0x1c>;
+			#fsl,rcpm-wakeup-cells = <7>;
+		};
+
+		ftm_alarm0: timer@2800000 {
+			compatible = "fsl,ls1028a-ftm-alarm";
+			reg = <0x0 0x2800000 0x0 0x10000>;
+			fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0 0x0>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+		};
 	};
 
 	malidp0: display@f080000 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
index 1aac81da7e37..fea167d222cf 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
@@ -148,4 +148,8 @@
 	};
 };
 
+&usb0 {
+	status = "okay";
+};
+
 #include "fsl-ls1043-post.dtsi"
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
index bfa9d957e536..3516af4726a5 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
@@ -209,3 +209,11 @@
 		fsl,tdm-interface;
 	};
 };
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 3b641bd43229..5c2e370f6316 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -27,6 +27,7 @@
 		ethernet4 = &enet4;
 		ethernet5 = &enet5;
 		ethernet6 = &enet6;
+		rtc1 = &ftm_alarm0;
 	};
 
 	cpus {
@@ -149,19 +150,79 @@
 	};
 
 	thermal-zones {
-		cpu_thermal: cpu-thermal {
+		ddr-controller {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
+			thermal-sensors = <&tmu 0>;
 
+			trips {
+				ddr-ctrler-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				ddr-ctrler-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		serdes {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 1>;
+
+			trips {
+				serdes-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				serdes-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		fman {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 2>;
+
+			trips {
+				fman-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				fman-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		core-cluster {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
 			thermal-sensors = <&tmu 3>;
 
 			trips {
-				cpu_alert: cpu-alert {
+				core_cluster_alert: core-cluster-alert {
 					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
-				cpu_crit: cpu-crit {
+
+				core_cluster_crit: core-cluster-crit {
 					temperature = <95000>;
 					hysteresis = <2000>;
 					type = "critical";
@@ -170,7 +231,7 @@
 
 			cooling-maps {
 				map0 {
-					trip = <&cpu_alert>;
+					trip = <&core_cluster_alert>;
 					cooling-device =
 						<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 						<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
@@ -179,6 +240,26 @@
 				};
 			};
 		};
+
+		sec {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 4>;
+
+			trips {
+				sec-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				sec-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
 	};
 
 	timer {
@@ -677,6 +758,7 @@
 			snps,quirk-frame-length-adjustment = <0x20>;
 			snps,dis_rxdet_inp3_quirk;
 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+			status = "disabled";
 		};
 
 		usb1: usb3@3000000 {
@@ -687,6 +769,7 @@
 			snps,quirk-frame-length-adjustment = <0x20>;
 			snps,dis_rxdet_inp3_quirk;
 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+			status = "disabled";
 		};
 
 		usb2: usb3@3100000 {
@@ -697,6 +780,7 @@
 			snps,quirk-frame-length-adjustment = <0x20>;
 			snps,dis_rxdet_inp3_quirk;
 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+			status = "disabled";
 		};
 
 		sata: sata@3200000 {
@@ -829,6 +913,19 @@
 			big-endian;
 		};
 
+		rcpm: power-controller@1ee2140 {
+			compatible = "fsl,ls1043a-rcpm", "fsl,qoriq-rcpm-2.1+";
+			reg = <0x0 0x1ee2140 0x0 0x4>;
+			#fsl,rcpm-wakeup-cells = <1>;
+		};
+
+		ftm_alarm0: timer@29d0000 {
+			compatible = "fsl,ls1043a-ftm-alarm";
+			reg = <0x0 0x29d0000 0x0 0x10000>;
+			fsl,rcpm-wakeup = <&rcpm 0x20000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			big-endian;
+		};
 	};
 
 	firmware {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index d4c1da3d4bde..0246d975a206 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -28,6 +28,7 @@
 		ethernet5 = &enet5;
 		ethernet6 = &enet6;
 		ethernet7 = &enet7;
+		rtc1 = &ftm_alarm0;
 	};
 
 	cpus {
@@ -117,19 +118,79 @@
 	};
 
 	thermal-zones {
-		cpu_thermal: cpu-thermal {
+		ddr-controller {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 0>;
+
+			trips {
+				ddr-ctrler-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				ddr-ctrler-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		serdes {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 1>;
+
+			trips {
+				serdes-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				serdes-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		fman {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 2>;
+
+			trips {
+				fman-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				fman-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		core-cluster {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;
 			thermal-sensors = <&tmu 3>;
 
 			trips {
-				cpu_alert: cpu-alert {
+				core_cluster_alert: core-cluster-alert {
 					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 
-				cpu_crit: cpu-crit {
+				core_cluster_crit: core-cluster-crit {
 					temperature = <95000>;
 					hysteresis = <2000>;
 					type = "critical";
@@ -138,7 +199,7 @@
 
 			cooling-maps {
 				map0 {
-					trip = <&cpu_alert>;
+					trip = <&core_cluster_alert>;
 					cooling-device =
 						<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
 						<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
@@ -147,6 +208,26 @@
 				};
 			};
 		};
+
+		sec {
+			polling-delay-passive = <1000>;
+			polling-delay = <5000>;
+			thermal-sensors = <&tmu 4>;
+
+			trips {
+				sec-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				sec-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
 	};
 
 	timer {
@@ -765,6 +846,20 @@
 			queue-sizes = <64 64>;
 			big-endian;
 		};
+
+		rcpm: power-controller@1ee2140 {
+			compatible = "fsl,ls1046a-rcpm", "fsl,qoriq-rcpm-2.1+";
+			reg = <0x0 0x1ee2140 0x0 0x4>;
+			#fsl,rcpm-wakeup-cells = <1>;
+		};
+
+		ftm_alarm0: timer@29d0000 {
+			compatible = "fsl,ls1046a-ftm-alarm";
+			reg = <0x0 0x29d0000 0x0 0x10000>;
+			fsl,rcpm-wakeup = <&rcpm 0x20000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			big-endian;
+		};
 	};
 
 	reserved-memory {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 36a799554620..169f4742ae3b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -18,6 +18,7 @@
 
 	aliases {
 		crypto = &crypto;
+		rtc1 = &ftm_alarm0;
 	};
 
 	cpus {
@@ -781,6 +782,19 @@
 				};
 			};
 		};
+
+		rcpm: power-controller@1e34040 {
+			compatible = "fsl,ls1088a-rcpm", "fsl,qoriq-rcpm-2.1+";
+			reg = <0x0 0x1e34040 0x0 0x18>;
+			#fsl,rcpm-wakeup-cells = <6>;
+		};
+
+		ftm_alarm0: timer@2800000 {
+			compatible = "fsl,ls1088a-ftm-alarm";
+			reg = <0x0 0x2800000 0x0 0x10000>;
+			fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+		};
 	};
 
 	firmware {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index 3944ef16ec60..41102dacc2e1 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -20,6 +20,7 @@
 
 	aliases {
 		crypto = &crypto;
+		rtc1 = &ftm_alarm0;
 		serial0 = &serial0;
 		serial1 = &serial1;
 		serial2 = &serial2;
@@ -763,6 +764,19 @@
 			reg = <0x0 0x04000000 0x0 0x01000000>;
 			interrupts = <0 12 4>;
 		};
+
+		rcpm: power-controller@1e34040 {
+			compatible = "fsl,ls208xa-rcpm", "fsl,qoriq-rcpm-2.1+";
+			reg = <0x0 0x1e34040 0x0 0x18>;
+			#fsl,rcpm-wakeup-cells = <6>;
+		};
+
+		ftm_alarm0: timer@2800000 {
+			compatible = "fsl,ls208xa-ftm-alarm";
+			reg = <0x0 0x2800000 0x0 0x10000>;
+			fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+		};
 	};
 
 	ddr1: memory-controller@1080000 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
index 3b88e1efe4db..2d1fe6c3797f 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
@@ -35,6 +35,42 @@
 	status = "okay";
 };
 
+&dspi0 {
+	status = "okay";
+
+	dflash0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+	};
+};
+
+&dspi1 {
+	status = "okay";
+
+	dflash1: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+	};
+};
+
+&dspi2 {
+	status = "okay";
+
+	dflash2: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+	};
+};
+
 &esdhc0 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
index 22d0308eb13b..54fe8cd3a711 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
@@ -121,7 +121,7 @@
 			power-monitor@40 {
 				compatible = "ti,ina220";
 				reg = <0x40>;
-				shunt-resistor = <1000>;
+				shunt-resistor = <500>;
 			};
 		};
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index abaeb587de48..d247e4228d60 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -2,7 +2,7 @@
 //
 // Device Tree Include file for Layerscape-LX2160A family SoC.
 //
-// Copyright 2018 NXP
+// Copyright 2018-2020 NXP
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -16,6 +16,10 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		rtc1 = &ftm_alarm0;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -777,6 +781,45 @@
 			status = "disabled";
 		};
 
+		dspi0: spi@2100000 {
+			compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2100000 0x0 0x10000>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 7>;
+			clock-names = "dspi";
+			spi-num-chipselects = <5>;
+			bus-num = <0>;
+			status = "disabled";
+		};
+
+		dspi1: spi@2110000 {
+			compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2110000 0x0 0x10000>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 7>;
+			clock-names = "dspi";
+			spi-num-chipselects = <5>;
+			bus-num = <1>;
+			status = "disabled";
+		};
+
+		dspi2: spi@2120000 {
+			compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2120000 0x0 0x10000>;
+			interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 7>;
+			clock-names = "dspi";
+			spi-num-chipselects = <5>;
+			bus-num = <2>;
+			status = "disabled";
+		};
+
 		esdhc0: esdhc@2140000 {
 			compatible = "fsl,esdhc";
 			reg = <0x0 0x2140000 0x0 0x10000>;
@@ -888,6 +931,20 @@
 			timeout-sec = <30>;
 		};
 
+		rcpm: power-controller@1e34040 {
+			compatible = "fsl,lx2160a-rcpm", "fsl,qoriq-rcpm-2.1+";
+			reg = <0x0 0x1e34040 0x0 0x1c>;
+			#fsl,rcpm-wakeup-cells = <7>;
+			little-endian;
+		};
+
+		ftm_alarm0: timer@2800000 {
+			compatible = "fsl,lx2160a-ftm-alarm";
+			reg = <0x0 0x2800000 0x0 0x10000>;
+			fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0 0x0>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		usb0: usb@3100000 {
 			compatible = "snps,dwc3";
 			reg = <0x0 0x3100000 0x0 0x10000>;
@@ -957,7 +1014,7 @@
 		pcie@3400000 {
 			compatible = "fsl,lx2160a-pcie";
 			reg = <0x00 0x03400000 0x0 0x00100000   /* controller registers */
-			       0x80 0x00000000 0x0 0x00001000>; /* configuration space */
+			       0x80 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "csr_axi_slave", "config_axi_slave";
 			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
 				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
@@ -985,7 +1042,7 @@
 		pcie@3500000 {
 			compatible = "fsl,lx2160a-pcie";
 			reg = <0x00 0x03500000 0x0 0x00100000   /* controller registers */
-			       0x88 0x00000000 0x0 0x00001000>; /* configuration space */
+			       0x88 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "csr_axi_slave", "config_axi_slave";
 			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
 				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
@@ -1013,7 +1070,7 @@
 		pcie@3600000 {
 			compatible = "fsl,lx2160a-pcie";
 			reg = <0x00 0x03600000 0x0 0x00100000   /* controller registers */
-			       0x90 0x00000000 0x0 0x00001000>; /* configuration space */
+			       0x90 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "csr_axi_slave", "config_axi_slave";
 			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
 				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
@@ -1041,7 +1098,7 @@
 		pcie@3700000 {
 			compatible = "fsl,lx2160a-pcie";
 			reg = <0x00 0x03700000 0x0 0x00100000   /* controller registers */
-			       0x98 0x00000000 0x0 0x00001000>; /* configuration space */
+			       0x98 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "csr_axi_slave", "config_axi_slave";
 			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
 				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
@@ -1069,7 +1126,7 @@
 		pcie@3800000 {
 			compatible = "fsl,lx2160a-pcie";
 			reg = <0x00 0x03800000 0x0 0x00100000   /* controller registers */
-			       0xa0 0x00000000 0x0 0x00001000>; /* configuration space */
+			       0xa0 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "csr_axi_slave", "config_axi_slave";
 			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
 				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
@@ -1097,7 +1154,7 @@
 		pcie@3900000 {
 			compatible = "fsl,lx2160a-pcie";
 			reg = <0x00 0x03900000 0x0 0x00100000   /* controller registers */
-			       0xa8 0x00000000 0x0 0x00001000>; /* configuration space */
+			       0xa8 0x00000000 0x0 0x00002000>; /* configuration space */
 			reg-names = "csr_axi_slave", "config_axi_slave";
 			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
 				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
index fb0137a8611c..94911b1707ef 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
@@ -136,7 +136,7 @@
 
 			ldo1_reg: LDO1 {
 				regulator-name = "LDO1";
-				regulator-min-microvolt = <3000000>;
+				regulator-min-microvolt = <1600000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
 				regulator-always-on;
@@ -144,7 +144,7 @@
 
 			ldo2_reg: LDO2 {
 				regulator-name = "LDO2";
-				regulator-min-microvolt = <900000>;
+				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <900000>;
 				regulator-boot-on;
 				regulator-always-on;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
index e5ec8322796d..0f1d7f8aeac4 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
@@ -208,7 +208,7 @@
 
 			ldo1_reg: LDO1 {
 				regulator-name = "LDO1";
-				regulator-min-microvolt = <3000000>;
+				regulator-min-microvolt = <1600000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
 				regulator-always-on;
@@ -216,7 +216,7 @@
 
 			ldo2_reg: LDO2 {
 				regulator-name = "LDO2";
-				regulator-min-microvolt = <900000>;
+				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <900000>;
 				regulator-boot-on;
 				regulator-always-on;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index aaf6e71101a1..76f040e4be5e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -18,10 +18,18 @@
 
 	aliases {
 		ethernet0 = &fec1;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
 		i2c0 = &i2c1;
 		i2c1 = &i2c2;
 		i2c2 = &i2c3;
 		i2c3 = &i2c4;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc3;
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
@@ -29,14 +37,6 @@
 		spi0 = &ecspi1;
 		spi1 = &ecspi2;
 		spi2 = &ecspi3;
-		mmc0 = &usdhc1;
-		mmc1 = &usdhc2;
-		mmc2 = &usdhc3;
-		gpio0 = &gpio1;
-		gpio1 = &gpio2;
-		gpio2 = &gpio3;
-		gpio3 = &gpio4;
-		gpio4 = &gpio5;
 	};
 
 	cpus {
@@ -467,7 +467,7 @@
 				reg = <0x30340000 0x10000>;
 			};
 
-			ocotp: ocotp-ctrl@30350000 {
+			ocotp: efuse@30350000 {
 				compatible = "fsl,imx8mm-ocotp", "syscon";
 				reg = <0x30350000 0x10000>;
 				clocks = <&clk IMX8MM_CLK_OCOTP_ROOT>;
@@ -775,6 +775,14 @@
 				status = "disabled";
 			};
 
+			mu: mailbox@30aa0000 {
+				compatible = "fsl,imx8mm-mu", "fsl,imx6sx-mu";
+				reg = <0x30aa0000 0x10000>;
+				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_MU_ROOT>;
+				#mbox-cells = <2>;
+			};
+
 			usdhc1: mmc@30b40000 {
 				compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
 				reg = <0x30b40000 0x10000>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
index d07e0e6a00cc..a1e5483dbbbe 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
@@ -113,7 +113,7 @@
 
 			ldo1_reg: LDO1 {
 				regulator-name = "LDO1";
-				regulator-min-microvolt = <3000000>;
+				regulator-min-microvolt = <1600000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
 				regulator-always-on;
@@ -121,7 +121,7 @@
 
 			ldo2_reg: LDO2 {
 				regulator-name = "LDO2";
-				regulator-min-microvolt = <900000>;
+				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <900000>;
 				regulator-boot-on;
 				regulator-always-on;
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-evk.dts
index 61f351958618..b846526a8d8b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dts
@@ -13,6 +13,102 @@
 	compatible = "fsl,imx8mn-evk", "fsl,imx8mn";
 };
 
+&i2c1 {
+	pmic: pmic@25 {
+		compatible = "nxp,pca9450b";
+		reg = <0x25>;
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 GPIO_ACTIVE_LOW>;
+
+		regulators {
+			buck1: BUCK1{
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			buck4: BUCK4{
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5{
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2: LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3: LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
 &A53_0 {
 	/delete-property/operating-points-v2;
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
index 85fc0aa38c4f..98f5324b1dbe 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
@@ -223,6 +223,12 @@
 		>;
 	};
 
+	pinctrl_pmic: pmicirq {
+		fsl,pins = <
+			MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x41
+		>;
+	};
+
 	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc {
 		fsl,pins = <
 			MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index 9a4b65a267d4..9385dd7d1a2f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -374,7 +374,7 @@
 				reg = <0x30340000 0x10000>;
 			};
 
-			ocotp: ocotp-ctrl@30350000 {
+			ocotp: efuse@30350000 {
 				compatible = "fsl,imx8mn-ocotp", "fsl,imx8mm-ocotp", "syscon";
 				reg = <0x30350000 0x10000>;
 				clocks = <&clk IMX8MN_CLK_OCOTP_ROOT>;
@@ -675,6 +675,14 @@
 				status = "disabled";
 			};
 
+			mu: mailbox@30aa0000 {
+				compatible = "fsl,imx8mn-mu", "fsl,imx6sx-mu";
+				reg = <0x30aa0000 0x10000>;
+				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MN_CLK_MU_ROOT>;
+				#mbox-cells = <2>;
+			};
+
 			usdhc1: mmc@30b40000 {
 				compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc";
 				reg = <0x30b40000 0x10000>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index 45e2c0a4e889..9de2aa1c573c 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -23,6 +23,12 @@
 		gpio2 = &gpio3;
 		gpio3 = &gpio4;
 		gpio4 = &gpio5;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		i2c3 = &i2c4;
+		i2c4 = &i2c5;
+		i2c5 = &i2c6;
 		mmc0 = &usdhc1;
 		mmc1 = &usdhc2;
 		mmc2 = &usdhc3;
@@ -307,8 +313,8 @@
 				reg = <0x30340000 0x10000>;
 			};
 
-			ocotp: ocotp-ctrl@30350000 {
-				compatible = "fsl,imx8mp-ocotp", "syscon";
+			ocotp: efuse@30350000 {
+				compatible = "fsl,imx8mp-ocotp", "fsl,imx8mm-ocotp", "syscon";
 				reg = <0x30350000 0x10000>;
 				clocks = <&clk IMX8MP_CLK_OCOTP_ROOT>;
 				/* For nvmem subnodes */
@@ -621,6 +627,14 @@
 				status = "disabled";
 			};
 
+			mu: mailbox@30aa0000 {
+				compatible = "fsl,imx8mp-mu", "fsl,imx6sx-mu";
+				reg = <0x30aa0000 0x10000>;
+				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MP_CLK_MU_ROOT>;
+				#mbox-cells = <2>;
+			};
+
 			i2c5: i2c@30ad0000 {
 				compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c";
 				#address-cells = <1>;
@@ -730,5 +744,11 @@
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-parent = <&gic>;
 		};
+
+		ddr-pmu@3d800000 {
+			compatible = "fsl,imx8mp-ddr-pmu", "fsl,imx8m-ddr-pmu";
+			reg = <0x3d800000 0x400000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
index 6a55165bd76a..0d1088dcaa02 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
@@ -131,6 +131,8 @@
 	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
+		clock-frequency = <12500000>;
+		suppress-preamble;
 		status = "okay";
 
 		switch: switch@0 {
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 978f8122c0d2..f70435cf9ad5 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -20,6 +20,7 @@
 	#size-cells = <2>;
 
 	aliases {
+		ethernet0 = &fec1;
 		gpio0 = &gpio1;
 		gpio1 = &gpio2;
 		gpio2 = &gpio3;
@@ -29,6 +30,8 @@
 		i2c1 = &i2c2;
 		i2c2 = &i2c3;
 		i2c3 = &i2c4;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
@@ -539,7 +542,7 @@
 				};
 			};
 
-			ocotp: ocotp-ctrl@30350000 {
+			ocotp: efuse@30350000 {
 				compatible = "fsl,imx8mq-ocotp", "syscon";
 				reg = <0x30350000 0x10000>;
 				clocks = <&clk IMX8MQ_CLK_OCOTP_ROOT>;
@@ -675,6 +678,7 @@
 					pgc_vpu: power-domain@6 {
 						#power-domain-cells = <0>;
 						reg = <IMX8M_POWER_DOMAIN_VPU>;
+						clocks = <&clk IMX8MQ_CLK_VPU_DEC_ROOT>;
 					};
 
 					pgc_disp: power-domain@7 {
@@ -959,6 +963,14 @@
 				status = "disabled";
 			};
 
+			mu: mailbox@30aa0000 {
+				compatible = "fsl,imx8mq-mu", "fsl,imx6sx-mu";
+				reg = <0x30aa0000 0x10000>;
+				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MQ_CLK_MU_ROOT>;
+				#mbox-cells = <2>;
+			};
+
 			usdhc1: mmc@30b40000 {
 				compatible = "fsl,imx8mq-usdhc",
 				             "fsl,imx7d-usdhc";
@@ -1142,6 +1154,32 @@
 			status = "disabled";
 		};
 
+		vpu: video-codec@38300000 {
+			compatible = "nxp,imx8mq-vpu";
+			reg = <0x38300000 0x10000>,
+			      <0x38310000 0x10000>,
+			      <0x38320000 0x10000>;
+			reg-names = "g1", "g2", "ctrl";
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "g1", "g2";
+			clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>,
+				 <&clk IMX8MQ_CLK_VPU_G2_ROOT>,
+				 <&clk IMX8MQ_CLK_VPU_DEC_ROOT>;
+			clock-names = "g1", "g2", "bus";
+			assigned-clocks = <&clk IMX8MQ_CLK_VPU_G1>,
+					  <&clk IMX8MQ_CLK_VPU_G2>,
+					  <&clk IMX8MQ_CLK_VPU_BUS>,
+					  <&clk IMX8MQ_VPU_PLL_BYPASS>;
+			assigned-clock-parents = <&clk IMX8MQ_VPU_PLL_OUT>,
+						 <&clk IMX8MQ_VPU_PLL_OUT>,
+						 <&clk IMX8MQ_SYS1_PLL_800M>,
+						 <&clk IMX8MQ_VPU_PLL>;
+			assigned-clock-rates = <600000000>, <600000000>,
+					       <800000000>, <0>;
+			power-domains = <&pgc_vpu>;
+		};
+
 		pcie0: pcie@33800000 {
 			compatible = "fsl,imx8mq-pcie";
 			reg = <0x33800000 0x400000>,
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
index d1c3c98e4b39..e46faac1fe71 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
@@ -19,6 +19,8 @@
 	#size-cells = <2>;
 
 	aliases {
+		ethernet0 = &fec1;
+		ethernet1 = &fec2;
 		gpio0 = &lsio_gpio0;
 		gpio1 = &lsio_gpio1;
 		gpio2 = &lsio_gpio2;
@@ -27,10 +29,18 @@
 		gpio5 = &lsio_gpio5;
 		gpio6 = &lsio_gpio6;
 		gpio7 = &lsio_gpio7;
+		i2c0 = &adma_i2c0;
+		i2c1 = &adma_i2c1;
+		i2c2 = &adma_i2c2;
+		i2c3 = &adma_i2c3;
 		mmc0 = &usdhc1;
 		mmc1 = &usdhc2;
 		mmc2 = &usdhc3;
+		mu0 = &lsio_mu0;
 		mu1 = &lsio_mu1;
+		mu2 = &lsio_mu2;
+		mu3 = &lsio_mu3;
+		mu4 = &lsio_mu4;
 		serial0 = &adma_lpuart0;
 		serial1 = &adma_lpuart1;
 		serial2 = &adma_lpuart2;
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
index e035cf195b19..c1b614dabb8e 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
@@ -13,6 +13,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/usb/pd.h>
 
 / {
 	model = "HiKey960";
@@ -526,10 +527,63 @@
 &i2c1 {
 	status = "okay";
 
+	rt1711h: rt1711h@4e {
+		compatible = "richtek,rt1711h";
+		reg = <0x4e>;
+		status = "ok";
+		interrupt-parent = <&gpio27>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_cfg_func>;
+
+		usb_con: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			data-role = "dual";
+			power-role = "dual";
+			try-power-role = "sink";
+			source-pdos = <PDO_FIXED(5000, 500, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 500, PDO_FIXED_USB_COMM)
+				PDO_VAR(5000, 5000, 1000)>;
+			op-sink-microwatt = <10000000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@1 {
+					reg = <1>;
+					usb_con_ss: endpoint {
+						remote-endpoint = <&dwc3_ss>;
+					};
+				};
+			};
+		};
+		port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			rt1711h_ep: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&dwc3_role_switch>;
+			};
+		};
+	};
+
 	adv7533: adv7533@39 {
 		status = "ok";
 		compatible = "adi,adv7533";
 		reg = <0x39>;
+		adi,dsi-lanes = <4>;
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				reg = <0>;
+			};
+			port@1 {
+				reg = <1>;
+			};
+		};
 	};
 };
 
@@ -612,3 +666,32 @@
 		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
 	};
 };
+
+&dwc3 { /* USB */
+	dr_mode = "otg";
+	maximum-speed = "super-speed";
+	phy_type = "utmi";
+	snps,dis-del-phy-power-chg-quirk;
+	snps,lfps_filter_quirk;
+	snps,dis_u2_susphy_quirk;
+	snps,dis_u3_susphy_quirk;
+	snps,tx_de_emphasis_quirk;
+	snps,tx_de_emphasis = <1>;
+	snps,dis_enblslpm_quirk;
+	snps,gctl-reset-quirk;
+	usb-role-switch;
+	role-switch-default-mode = "host";
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		dwc3_role_switch: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&rt1711h_ep>;
+		};
+
+		dwc3_ss: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&usb_con_ss>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index c39b78989ff9..d25aac5e0bf8 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -1152,6 +1152,40 @@
 				};
 			};
 		};
+
+		usb3_otg_bc: usb3_otg_bc@ff200000 {
+			compatible = "syscon", "simple-mfd";
+			reg = <0x0 0xff200000 0x0 0x1000>;
+
+			usb_phy: usb-phy {
+				compatible = "hisilicon,hi3660-usb-phy";
+				#phy-cells = <0>;
+				hisilicon,pericrg-syscon = <&crg_ctrl>;
+				hisilicon,pctrl-syscon = <&pctrl>;
+				hisilicon,eye-diagram-param = <0x22466e4>;
+			};
+		};
+
+		dwc3: dwc3@ff100000 {
+			compatible = "snps,dwc3";
+			reg = <0x0 0xff100000 0x0 0x100000>;
+
+			clocks = <&crg_ctrl HI3660_CLK_ABB_USB>,
+				 <&crg_ctrl HI3660_ACLK_GATE_USB3OTG>;
+			clock-names = "ref", "bus_early";
+
+			assigned-clocks = <&crg_ctrl HI3660_ACLK_GATE_USB3OTG>;
+			assigned-clock-rates = <229000000>;
+
+			resets = <&crg_rst 0x90 8>,
+				 <&crg_rst 0x90 7>,
+				 <&crg_rst 0x90 6>,
+				 <&crg_rst 0x90 5>;
+
+			interrupts = <0 159 4>, <0 161 4>;
+			phys = <&usb_phy>;
+			phy-names = "usb3-phy";
+		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
index c14205cd6bf5..533ed523888d 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -122,222 +122,6 @@
 		power-off-delay-us = <10>;
 	};
 
-	soc {
-		spi0: spi@f7106000 {
-			status = "ok";
-		};
-
-		i2c0: i2c@f7100000 {
-			status = "ok";
-		};
-
-		i2c1: i2c@f7101000 {
-			status = "ok";
-		};
-
-		uart1: uart@f7111000 {
-			assigned-clocks = <&sys_ctrl HI6220_UART1_SRC>;
-			assigned-clock-rates = <150000000>;
-			status = "ok";
-
-			bluetooth {
-				compatible = "ti,wl1835-st";
-				enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-				clocks = <&pmic>;
-				clock-names = "ext_clock";
-			};
-		};
-
-		uart2: uart@f7112000 {
-			status = "ok";
-		};
-
-		uart3: uart@f7113000 {
-			status = "ok";
-		};
-
-		/*
-		 * Legend: proper name = the GPIO line is used as GPIO
-		 *         NC = not connected (not routed from the SoC)
-		 *         "[PER]" = pin is muxed for peripheral (not GPIO)
-		 *         "" = no idea, schematic doesn't say, could be
-		 *              unrouted (not connected to any external pin)
-		 *         LSEC = Low Speed External Connector
-		 *         HSEC = High Speed External Connector
-		 *
-		 * Pin assignments taken from LeMaker and CircuitCo Schematics
-		 * Rev A1.
-		 *
-		 * For the lines routed to the external connectors the
-		 * lines are named after the 96Boards CE Specification 1.0,
-		 * Appendix "Expansion Connector Signal Description".
-		 *
-		 * When the 96Board naming of a line and the schematic name of
-		 * the same line are in conflict, the 96Board specification
-		 * takes precedence, which means that the external UART on the
-		 * LSEC is named UART0 while the schematic and SoC names this
-		 * UART2. This is only for the informational lines i.e. "[FOO]",
-		 * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only
-		 * ones actually used for GPIO.
-		 */
-		gpio0: gpio@f8011000 {
-			gpio-line-names = "PWR_HOLD", "DSI_SEL",
-			"USB_HUB_RESET_N", "USB_SEL", "HDMI_PD", "WL_REG_ON",
-			"PWRON_DET", "5V_HUB_EN";
-		};
-
-		gpio1: gpio@f8012000 {
-			gpio-line-names = "SD_DET", "HDMI_INT", "PMU_IRQ_N",
-			"WL_HOST_WAKE", "NC", "NC", "NC", "BT_REG_ON";
-		};
-
-		gpio2: gpio@f8013000 {
-			gpio-line-names =
-				"GPIO-A", /* LSEC Pin 23: GPIO2_0 */
-				"GPIO-B", /* LSEC Pin 24: GPIO2_1 */
-				"GPIO-C", /* LSEC Pin 25: GPIO2_2 */
-				"GPIO-D", /* LSEC Pin 26: GPIO2_3 */
-				"GPIO-E", /* LSEC Pin 27: GPIO2_4 */
-				"USB_ID_DET", "USB_VBUS_DET",
-				"GPIO-H"; /* LSEC Pin 30: GPIO2_7 */
-		};
-
-		gpio3: gpio@f8014000 {
-			gpio-line-names = "GPIO3_0", "NC", "NC", "", "NC", "",
-			"WLAN_ACTIVE", "NC", "NC";
-		};
-
-		gpio4: gpio@f7020000 {
-			gpio-line-names = "USER_LED1", "USER_LED2", "USER_LED3",
-			"USER_LED4", "SD_SEL", "NC", "NC", "BT_ACTIVE";
-		};
-
-		gpio5: gpio@f7021000 {
-			gpio-line-names = "NC", "NC",
-			"[UART1_RxD]", /* LSEC Pin 11: UART3_RX */
-			"[UART1_TxD]", /* LSEC Pin 13: UART3_TX */
-			"[AUX_SSI1]", "NC",
-			"[PCM_CLK]", /* LSEC Pin 18: MODEM_PCM_XCLK */
-			"[PCM_FS]"; /* LSEC Pin 16: MODEM_PCM_XFS */
-		};
-
-		gpio6: gpio@f7022000 {
-			gpio-line-names =
-			"[SPI0_DIN]", /* Pin 10: SPI0_DI */
-			"[SPI0_DOUT]", /* Pin 14: SPI0_DO */
-			"[SPI0_CS]", /* Pin 12: SPI0_CS_N */
-			"[SPI0_SCLK]", /* Pin 8: SPI0_SCLK */
-			"NC", "NC", "NC",
-			"GPIO-G"; /* Pin 29: GPIO6_7_DSI_TE0 */
-		};
-
-		gpio7: gpio@f7023000 {
-			gpio-line-names = "NC", "NC", "NC", "NC",
-			"[PCM_DI]", /* Pin 22: MODEM_PCM_DI */
-			"[PCM_DO]", /* Pin 20: MODEM_PCM_DO */
-			"NC", "NC";
-		};
-
-		gpio8: gpio@f7024000 {
-			gpio-line-names = "NC", "[CEC_CLK_19_2MHZ]", "NC",
-			"", "", "", "", "", "";
-		};
-
-		gpio9: gpio@f7025000 {
-			gpio-line-names = "",
-			"GPIO-J", /* LSEC Pin 32: ISP_PWDN0_GPIO9_1 */
-			"GPIO-L", /* LSEC Pin 34: ISP_PWDN1_GPIO9_2 */
-			"NC", "NC", "NC", "NC", "[ISP_CCLK0]";
-		};
-
-		gpio10: gpio@f7026000 {
-			gpio-line-names = "BOOT_SEL",
-			"[ISP_CCLK1]",
-			"GPIO-I", /* LSEC Pin 31: ISP_RSTB0_GPIO10_2 */
-			"GPIO-K", /* LSEC Pin 33: ISP_RSTB1_GPIO10_3 */
-			"NC", "NC",
-			"[I2C2_SDA]", /* HSEC Pin 34: ISP0_SDA */
-			"[I2C2_SCL]"; /* HSEC Pin 32: ISP0_SCL */
-		};
-
-		gpio11: gpio@f7027000 {
-			gpio-line-names =
-			"[I2C3_SDA]", /* HSEC Pin 38: ISP1_SDA */
-			"[I2C3_SCL]", /* HSEC Pin 36: ISP1_SCL */
-			"", "NC", "NC", "NC", "", "";
-		};
-
-		gpio12: gpio@f7028000 {
-			gpio-line-names = "[BT_PCM_XFS]", "[BT_PCM_DI]",
-			"[BT_PCM_DO]",
-			"NC", "NC", "NC", "NC",
-			"GPIO-F"; /* LSEC Pin 28: BL_PWM_GPIO12_7 */
-		};
-
-		gpio13: gpio@f7029000 {
-			gpio-line-names = "[UART0_RX]", "[UART0_TX]",
-			"[BT_UART1_CTS]", "[BT_UART1_RTS]",
-			"[BT_UART1_RX]", "[BT_UART1_TX]",
-			"[UART0_CTS]", /* LSEC Pin 3: UART2_CTS_N */
-			"[UART0_RTS]"; /* LSEC Pin 9: UART2_RTS_N */
-		};
-
-		gpio14: gpio@f702a000 {
-			gpio-line-names =
-			"[UART0_RxD]", /* LSEC Pin 7: UART2_RX */
-			"[UART0_TxD]", /* LSEC Pin 5: UART2_TX */
-			"[I2C0_SCL]", /* LSEC Pin 15: I2C0_SCL */
-			"[I2C0_SDA]", /* LSEC Pin 17: I2C0_SDA */
-			"[I2C1_SCL]", /* LSEC Pin 19: I2C1_SCL */
-			"[I2C1_SDA]", /* LSEC Pin 21: I2C1_SDA */
-			"[I2C2_SCL]", "[I2C2_SDA]";
-		};
-
-		gpio15: gpio@f702b000 {
-			gpio-line-names = "", "", "", "", "", "", "NC", "";
-		};
-
-		/* GPIO blocks 16 thru 19 do not appear to be routed to pins */
-
-		dwmmc_0: dwmmc0@f723d000 {
-			cap-mmc-highspeed;
-			non-removable;
-			bus-width = <0x8>;
-			vmmc-supply = <&ldo19>;
-		};
-
-		dwmmc_1: dwmmc1@f723e000 {
-			card-detect-delay = <200>;
-			cap-sd-highspeed;
-			sd-uhs-sdr12;
-			sd-uhs-sdr25;
-			sd-uhs-sdr50;
-			vqmmc-supply = <&ldo7>;
-			vmmc-supply = <&ldo10>;
-			bus-width = <0x4>;
-			disable-wp;
-			cd-gpios = <&gpio1 0 1>;
-		};
-
-		dwmmc_2: dwmmc2@f723f000 {
-			bus-width = <0x4>;
-			non-removable;
-			cap-power-off-card;
-			vmmc-supply = <&reg_vdd_3v3>;
-			mmc-pwrseq = <&wl1835_pwrseq>;
-
-			#address-cells = <0x1>;
-			#size-cells = <0x0>;
-			wlcore: wlcore@2 {
-				compatible = "ti,wl1835";
-				reg = <2>;	/* sdio func num */
-				/* WL_IRQ, WL_HOST_WAKE_GPIO1_3 */
-				interrupt-parent = <&gpio1>;
-				interrupts = <3 IRQ_TYPE_EDGE_RISING>;
-			};
-		};
-	};
-
 	leds {
 		compatible = "gpio-leds";
 
@@ -480,10 +264,26 @@
 	};
 };
 
+&uart1 {
+	assigned-clocks = <&sys_ctrl HI6220_UART1_SRC>;
+	assigned-clock-rates = <150000000>;
+	status = "ok";
+
+	bluetooth {
+		compatible = "ti,wl1835-st";
+		enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		clocks = <&pmic>;
+		clock-names = "ext_clock";
+	};
+};
+
 &uart2 {
+	status = "ok";
 	label = "LS-UART0";
 };
+
 &uart3 {
+	status = "ok";
 	label = "LS-UART1";
 };
 
@@ -506,6 +306,196 @@
 	};
 };
 
+&dwmmc_0 {
+	cap-mmc-highspeed;
+	non-removable;
+	bus-width = <0x8>;
+	vmmc-supply = <&ldo19>;
+};
+
+&dwmmc_1 {
+	card-detect-delay = <200>;
+	cap-sd-highspeed;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	vqmmc-supply = <&ldo7>;
+	vmmc-supply = <&ldo10>;
+	bus-width = <0x4>;
+	disable-wp;
+	cd-gpios = <&gpio1 0 1>;
+};
+
+&dwmmc_2 {
+	bus-width = <0x4>;
+	non-removable;
+	cap-power-off-card;
+	vmmc-supply = <&reg_vdd_3v3>;
+	mmc-pwrseq = <&wl1835_pwrseq>;
+
+	#address-cells = <0x1>;
+	#size-cells = <0x0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1835";
+		reg = <2>;	/* sdio func num */
+		/* WL_IRQ, WL_HOST_WAKE_GPIO1_3 */
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+/*
+ * Legend: proper name = the GPIO line is used as GPIO
+ *         NC = not connected (not routed from the SoC)
+ *         "[PER]" = pin is muxed for peripheral (not GPIO)
+ *         "" = no idea, schematic doesn't say, could be
+ *              unrouted (not connected to any external pin)
+ *         LSEC = Low Speed External Connector
+ *         HSEC = High Speed External Connector
+ *
+ * Pin assignments taken from LeMaker and CircuitCo Schematics
+ * Rev A1.
+ *
+ * For the lines routed to the external connectors the
+ * lines are named after the 96Boards CE Specification 1.0,
+ * Appendix "Expansion Connector Signal Description".
+ *
+ * When the 96Board naming of a line and the schematic name of
+ * the same line are in conflict, the 96Board specification
+ * takes precedence, which means that the external UART on the
+ * LSEC is named UART0 while the schematic and SoC names this
+ * UART2. This is only for the informational lines i.e. "[FOO]",
+ * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only
+ * ones actually used for GPIO.
+ */
+&gpio0 {
+	gpio-line-names = "PWR_HOLD", "DSI_SEL",
+	"USB_HUB_RESET_N", "USB_SEL", "HDMI_PD", "WL_REG_ON",
+	"PWRON_DET", "5V_HUB_EN";
+};
+
+&gpio1 {
+	gpio-line-names = "SD_DET", "HDMI_INT", "PMU_IRQ_N",
+	"WL_HOST_WAKE", "NC", "NC", "NC", "BT_REG_ON";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"GPIO-A", /* LSEC Pin 23: GPIO2_0 */
+		"GPIO-B", /* LSEC Pin 24: GPIO2_1 */
+		"GPIO-C", /* LSEC Pin 25: GPIO2_2 */
+		"GPIO-D", /* LSEC Pin 26: GPIO2_3 */
+		"GPIO-E", /* LSEC Pin 27: GPIO2_4 */
+		"USB_ID_DET", "USB_VBUS_DET",
+		"GPIO-H"; /* LSEC Pin 30: GPIO2_7 */
+};
+
+&gpio3 {
+	gpio-line-names = "GPIO3_0", "NC", "NC", "", "NC", "",
+	"WLAN_ACTIVE", "NC", "NC";
+};
+
+&gpio4 {
+	gpio-line-names = "USER_LED1", "USER_LED2", "USER_LED3",
+	"USER_LED4", "SD_SEL", "NC", "NC", "BT_ACTIVE";
+};
+
+&gpio5 {
+	gpio-line-names = "NC", "NC",
+	"[UART1_RxD]", /* LSEC Pin 11: UART3_RX */
+	"[UART1_TxD]", /* LSEC Pin 13: UART3_TX */
+	"[AUX_SSI1]", "NC",
+	"[PCM_CLK]", /* LSEC Pin 18: MODEM_PCM_XCLK */
+	"[PCM_FS]"; /* LSEC Pin 16: MODEM_PCM_XFS */
+};
+
+&gpio6 {
+	gpio-line-names =
+	"[SPI0_DIN]", /* Pin 10: SPI0_DI */
+	"[SPI0_DOUT]", /* Pin 14: SPI0_DO */
+	"[SPI0_CS]", /* Pin 12: SPI0_CS_N */
+	"[SPI0_SCLK]", /* Pin 8: SPI0_SCLK */
+	"NC", "NC", "NC",
+	"GPIO-G"; /* Pin 29: GPIO6_7_DSI_TE0 */
+};
+
+&gpio7 {
+	gpio-line-names = "NC", "NC", "NC", "NC",
+	"[PCM_DI]", /* Pin 22: MODEM_PCM_DI */
+	"[PCM_DO]", /* Pin 20: MODEM_PCM_DO */
+	"NC", "NC";
+};
+
+&gpio8 {
+	gpio-line-names = "NC", "[CEC_CLK_19_2MHZ]", "NC",
+	"", "", "", "", "", "";
+};
+
+&gpio9 {
+	gpio-line-names = "",
+	"GPIO-J", /* LSEC Pin 32: ISP_PWDN0_GPIO9_1 */
+	"GPIO-L", /* LSEC Pin 34: ISP_PWDN1_GPIO9_2 */
+	"NC", "NC", "NC", "NC", "[ISP_CCLK0]";
+};
+
+&gpio10 {
+	gpio-line-names = "BOOT_SEL",
+	"[ISP_CCLK1]",
+	"GPIO-I", /* LSEC Pin 31: ISP_RSTB0_GPIO10_2 */
+	"GPIO-K", /* LSEC Pin 33: ISP_RSTB1_GPIO10_3 */
+	"NC", "NC",
+	"[I2C2_SDA]", /* HSEC Pin 34: ISP0_SDA */
+	"[I2C2_SCL]"; /* HSEC Pin 32: ISP0_SCL */
+};
+
+&gpio11 {
+	gpio-line-names =
+	"[I2C3_SDA]", /* HSEC Pin 38: ISP1_SDA */
+	"[I2C3_SCL]", /* HSEC Pin 36: ISP1_SCL */
+	"", "NC", "NC", "NC", "", "";
+};
+
+&gpio12 {
+	gpio-line-names = "[BT_PCM_XFS]", "[BT_PCM_DI]",
+	"[BT_PCM_DO]",
+	"NC", "NC", "NC", "NC",
+	"GPIO-F"; /* LSEC Pin 28: BL_PWM_GPIO12_7 */
+};
+
+&gpio13 {
+	gpio-line-names = "[UART0_RX]", "[UART0_TX]",
+	"[BT_UART1_CTS]", "[BT_UART1_RTS]",
+	"[BT_UART1_RX]", "[BT_UART1_TX]",
+	"[UART0_CTS]", /* LSEC Pin 3: UART2_CTS_N */
+	"[UART0_RTS]"; /* LSEC Pin 9: UART2_RTS_N */
+};
+
+&gpio14 {
+	gpio-line-names =
+	"[UART0_RxD]", /* LSEC Pin 7: UART2_RX */
+	"[UART0_TxD]", /* LSEC Pin 5: UART2_TX */
+	"[I2C0_SCL]", /* LSEC Pin 15: I2C0_SCL */
+	"[I2C0_SDA]", /* LSEC Pin 17: I2C0_SDA */
+	"[I2C1_SCL]", /* LSEC Pin 19: I2C1_SCL */
+	"[I2C1_SDA]", /* LSEC Pin 21: I2C1_SDA */
+	"[I2C2_SCL]", "[I2C2_SDA]";
+};
+
+&gpio15 {
+	gpio-line-names = "", "", "", "", "", "", "NC", "";
+};
+
+/* GPIO blocks 16 thru 19 do not appear to be routed to pins */
+
+
+&i2c0 {
+	status = "ok";
+};
+
+&i2c1 {
+	status = "ok";
+};
+
 &i2c2 {
 	#address-cells = <1>;
 	#size-cells = <0>;
@@ -516,7 +506,7 @@
 		reg = <0x39>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <1 2>;
-		pd-gpio = <&gpio0 4 0>;
+		pd-gpios = <&gpio0 4 0>;
 		adi,dsi-lanes = <4>;
 		#sound-dai-cells = <0>;
 
@@ -549,3 +539,7 @@
 		};
 	};
 };
+
+&spi0 {
+	status = "ok";
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
index 2072b637b5af..3d189d9f0d24 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -302,7 +302,7 @@
 			mboxes = <&mailbox 1 0 11>;
 		};
 
-		uart0: uart@f8015000 {	/* console */
+		uart0: serial@f8015000 {	/* console */
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x0 0xf8015000 0x0 0x1000>;
 			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
@@ -311,7 +311,7 @@
 			clock-names = "uartclk", "apb_pclk";
 		};
 
-		uart1: uart@f7111000 {
+		uart1: serial@f7111000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x0 0xf7111000 0x0 0x1000>;
 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
@@ -325,7 +325,7 @@
 			status = "disabled";
 		};
 
-		uart2: uart@f7112000 {
+		uart2: serial@f7112000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x0 0xf7112000 0x0 0x1000>;
 			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
@@ -337,7 +337,7 @@
 			status = "disabled";
 		};
 
-		uart3: uart@f7113000 {
+		uart3: serial@f7113000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x0 0xf7113000 0x0 0x1000>;
 			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
@@ -349,7 +349,7 @@
 			status = "disabled";
 		};
 
-		uart4: uart@f7114000 {
+		uart4: serial@f7114000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x0 0xf7114000 0x0 0x1000>;
 			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/intel/Makefile b/arch/arm64/boot/dts/intel/Makefile
index 40cb16e8c814..296eceec4276 100644
--- a/arch/arm64/boot/dts/intel/Makefile
+++ b/arch/arm64/boot/dts/intel/Makefile
@@ -1,3 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0-only
 dtb-$(CONFIG_ARCH_AGILEX) += socfpga_agilex_socdk.dtb \
 			     socfpga_agilex_socdk_nand.dtb
+dtb-$(CONFIG_ARCH_KEEMBAY) += keembay-evm.dtb
diff --git a/arch/arm64/boot/dts/intel/keembay-evm.dts b/arch/arm64/boot/dts/intel/keembay-evm.dts
new file mode 100644
index 000000000000..466c85363a29
--- /dev/null
+++ b/arch/arm64/boot/dts/intel/keembay-evm.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
+/*
+ * Copyright (C) 2020, Intel Corporation
+ *
+ * Device tree describing Keem Bay EVM board.
+ */
+
+/dts-v1/;
+
+#include "keembay-soc.dtsi"
+
+/ {
+	model = "Keem Bay EVM";
+	compatible = "intel,keembay-evm", "intel,keembay";
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* 2GB of DDR memory. */
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+
+};
+
+&uart3 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/intel/keembay-soc.dtsi b/arch/arm64/boot/dts/intel/keembay-soc.dtsi
new file mode 100644
index 000000000000..781761d2942b
--- /dev/null
+++ b/arch/arm64/boot/dts/intel/keembay-soc.dtsi
@@ -0,0 +1,123 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
+/*
+ * Copyright (C) 2020, Intel Corporation.
+ *
+ * Device tree describing Keem Bay SoC.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0>;
+			enable-method = "psci";
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x1>;
+			enable-method = "psci";
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x2>;
+			enable-method = "psci";
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x3>;
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	gic: interrupt-controller@20500000 {
+		compatible = "arm,gic-v3";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = <0x0 0x20500000 0x0 0x20000>,	/* GICD */
+		      <0x0 0x20580000 0x0 0x80000>;	/* GICR */
+		/* VGIC maintenance interrupt */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		/* Secure, non-secure, virtual, and hypervisor */
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 0x7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		uart0: serial@20150000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x20150000 0x0 0x100>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <24000000>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart1: serial@20160000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x20160000 0x0 0x100>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <24000000>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart2: serial@20170000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x20170000 0x0 0x100>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <24000000>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart3: serial@20180000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x20180000 0x0 0x100>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <24000000>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
index f52de8f7806a..9d7f19e97df7 100644
--- a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
@@ -6,6 +6,7 @@
 /dts-v1/;
 #include <dt-bindings/reset/altr,rst-mgr-s10.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/agilex-clock.h>
 
 / {
 	compatible = "intel,socfpga-agilex";
@@ -101,6 +102,40 @@
 			fpga-mgr = <&fpga_mgr>;
 		};
 
+		clkmgr: clock-controller@ffd10000 {
+			compatible = "intel,agilex-clkmgr";
+			reg = <0xffd10000 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		clocks {
+			cb_intosc_hs_div2_clk: cb-intosc-hs-div2-clk {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+			};
+
+			cb_intosc_ls_clk: cb-intosc-ls-clk {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+			};
+
+			f2s_free_clk: f2s-free-clk {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+			};
+
+			osc1: osc1 {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+			};
+
+			qspi_clk: qspi-clk {
+				#clock-cells = <0>;
+				compatible = "fixed-clock";
+				clock-frequency = <200000000>;
+			};
+		};
+
 		gmac0: ethernet@ff800000 {
 			compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.74a", "snps,dwmac";
 			reg = <0xff800000 0x2000>;
@@ -114,6 +149,8 @@
 			snps,multicast-filter-bins = <256>;
 			iommus = <&smmu 1>;
 			altr,sysmgr-syscon = <&sysmgr 0x44 0>;
+			clocks = <&clkmgr AGILEX_EMAC0_CLK>;
+			clock-names = "stmmaceth";
 			status = "disabled";
 		};
 
@@ -130,6 +167,8 @@
 			snps,multicast-filter-bins = <256>;
 			iommus = <&smmu 2>;
 			altr,sysmgr-syscon = <&sysmgr 0x48 8>;
+			clocks = <&clkmgr AGILEX_EMAC1_CLK>;
+			clock-names = "stmmaceth";
 			status = "disabled";
 		};
 
@@ -146,6 +185,8 @@
 			snps,multicast-filter-bins = <256>;
 			iommus = <&smmu 3>;
 			altr,sysmgr-syscon = <&sysmgr 0x4c 16>;
+			clocks = <&clkmgr AGILEX_EMAC2_CLK>;
+			clock-names = "stmmaceth";
 			status = "disabled";
 		};
 
@@ -196,6 +237,7 @@
 			reg = <0xffc02800 0x100>;
 			interrupts = <0 103 4>;
 			resets = <&rst I2C0_RESET>;
+			clocks = <&clkmgr AGILEX_L4_SP_CLK>;
 			status = "disabled";
 		};
 
@@ -206,6 +248,7 @@
 			reg = <0xffc02900 0x100>;
 			interrupts = <0 104 4>;
 			resets = <&rst I2C1_RESET>;
+			clocks = <&clkmgr AGILEX_L4_SP_CLK>;
 			status = "disabled";
 		};
 
@@ -216,6 +259,7 @@
 			reg = <0xffc02a00 0x100>;
 			interrupts = <0 105 4>;
 			resets = <&rst I2C2_RESET>;
+			clocks = <&clkmgr AGILEX_L4_SP_CLK>;
 			status = "disabled";
 		};
 
@@ -226,6 +270,7 @@
 			reg = <0xffc02b00 0x100>;
 			interrupts = <0 106 4>;
 			resets = <&rst I2C3_RESET>;
+			clocks = <&clkmgr AGILEX_L4_SP_CLK>;
 			status = "disabled";
 		};
 
@@ -236,6 +281,7 @@
 			reg = <0xffc02c00 0x100>;
 			interrupts = <0 107 4>;
 			resets = <&rst I2C4_RESET>;
+			clocks = <&clkmgr AGILEX_L4_SP_CLK>;
 			status = "disabled";
 		};
 
@@ -248,6 +294,9 @@
 			fifo-depth = <0x400>;
 			resets = <&rst SDMMC_RESET>;
 			reset-names = "reset";
+			clocks = <&clkmgr AGILEX_L4_MP_CLK>,
+				 <&clkmgr AGILEX_SDMMC_CLK>;
+			clock-names = "biu", "ciu";
 			iommus = <&smmu 5>;
 			status = "disabled";
 		};
@@ -260,6 +309,10 @@
 			      <0xffb80000 0x1000>;
 			reg-names = "nand_data", "denali_reg";
 			interrupts = <0 97 4>;
+			clocks = <&clkmgr AGILEX_NAND_CLK>,
+				 <&clkmgr AGILEX_NAND_X_CLK>,
+				 <&clkmgr AGILEX_NAND_ECC_CLK>;
+			clock-names = "nand", "nand_x", "ecc";
 			resets = <&rst NAND_RESET>, <&rst NAND_OCP_RESET>;
 			status = "disabled";
 		};
@@ -286,6 +339,8 @@
 			#dma-requests = <32>;
 			resets = <&rst DMA_RESET>, <&rst DMA_OCP_RESET>;
 			reset-names = "dma", "dma-ocp";
+			clocks = <&clkmgr AGILEX_L4_MAIN_CLK>;
+			clock-names = "apb_pclk";
 		};
 
 		rst: rstmgr@ffd11000 {
@@ -312,6 +367,9 @@
 				<0 162 4>, <0 163 4>, <0 164 4>, <0 165 4>,
 				<0 166 4>, <0 167 4>, <0 168 4>, <0 169 4>;
 			stream-match-mask = <0x7ff0>;
+			clocks = <&clkmgr AGILEX_MPU_CCU_CLK>,
+				 <&clkmgr AGILEX_L3_MAIN_FREE_CLK>,
+				 <&clkmgr AGILEX_L4_MAIN_CLK>;
 			status = "disabled";
 		};
 
@@ -322,8 +380,10 @@
 			reg = <0xffda4000 0x1000>;
 			interrupts = <0 99 4>;
 			resets = <&rst SPIM0_RESET>;
+			reset-names = "spi";
 			reg-io-width = <4>;
 			num-cs = <4>;
+			clocks = <&clkmgr AGILEX_L4_MAIN_CLK>;
 			status = "disabled";
 		};
 
@@ -334,8 +394,10 @@
 			reg = <0xffda5000 0x1000>;
 			interrupts = <0 100 4>;
 			resets = <&rst SPIM1_RESET>;
+			reset-names = "spi";
 			reg-io-width = <4>;
 			num-cs = <4>;
+			clocks = <&clkmgr AGILEX_L4_MAIN_CLK>;
 			status = "disabled";
 		};
 
@@ -357,24 +419,32 @@
 			compatible = "snps,dw-apb-timer";
 			interrupts = <0 113 4>;
 			reg = <0xffc03000 0x100>;
+			clocks = <&clkmgr AGILEX_L4_SP_CLK>;
+			clock-names = "timer";
 		};
 
 		timer1: timer1@ffc03100 {
 			compatible = "snps,dw-apb-timer";
 			interrupts = <0 114 4>;
 			reg = <0xffc03100 0x100>;
+			clocks = <&clkmgr AGILEX_L4_SP_CLK>;
+			clock-names = "timer";
 		};
 
 		timer2: timer2@ffd00000 {
 			compatible = "snps,dw-apb-timer";
 			interrupts = <0 115 4>;
 			reg = <0xffd00000 0x100>;
+			clocks = <&clkmgr AGILEX_L4_SP_CLK>;
+			clock-names = "timer";
 		};
 
 		timer3: timer3@ffd00100 {
 			compatible = "snps,dw-apb-timer";
 			interrupts = <0 116 4>;
 			reg = <0xffd00100 0x100>;
+			clocks = <&clkmgr AGILEX_L4_SP_CLK>;
+			clock-names = "timer";
 		};
 
 		uart0: serial0@ffc02000 {
@@ -385,6 +455,7 @@
 			reg-io-width = <4>;
 			resets = <&rst UART0_RESET>;
 			status = "disabled";
+			clocks = <&clkmgr AGILEX_L4_SP_CLK>;
 		};
 
 		uart1: serial1@ffc02100 {
@@ -394,6 +465,7 @@
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			resets = <&rst UART1_RESET>;
+			clocks = <&clkmgr AGILEX_L4_SP_CLK>;
 			status = "disabled";
 		};
 
@@ -411,6 +483,7 @@
 			phy-names = "usb2-phy";
 			resets = <&rst USB0_RESET>, <&rst USB0_OCP_RESET>;
 			reset-names = "dwc2", "dwc2-ecc";
+			clocks = <&clkmgr AGILEX_USB_CLK>;
 			iommus = <&smmu 6>;
 			status = "disabled";
 		};
@@ -424,6 +497,7 @@
 			resets = <&rst USB1_RESET>, <&rst USB1_OCP_RESET>;
 			reset-names = "dwc2", "dwc2-ecc";
 			iommus = <&smmu 7>;
+			clocks = <&clkmgr AGILEX_USB_CLK>;
 			status = "disabled";
 		};
 
@@ -432,6 +506,7 @@
 			reg = <0xffd00200 0x100>;
 			interrupts = <0 117 4>;
 			resets = <&rst WATCHDOG0_RESET>;
+			clocks = <&clkmgr AGILEX_L4_SYS_FREE_CLK>;
 			status = "disabled";
 		};
 
@@ -440,6 +515,7 @@
 			reg = <0xffd00300 0x100>;
 			interrupts = <0 118 4>;
 			resets = <&rst WATCHDOG1_RESET>;
+			clocks = <&clkmgr AGILEX_L4_SYS_FREE_CLK>;
 			status = "disabled";
 		};
 
@@ -448,6 +524,7 @@
 			reg = <0xffd00400 0x100>;
 			interrupts = <0 125 4>;
 			resets = <&rst WATCHDOG2_RESET>;
+			clocks = <&clkmgr AGILEX_L4_SYS_FREE_CLK>;
 			status = "disabled";
 		};
 
@@ -456,6 +533,7 @@
 			reg = <0xffd00500 0x100>;
 			interrupts = <0 126 4>;
 			resets = <&rst WATCHDOG3_RESET>;
+			clocks = <&clkmgr AGILEX_L4_SYS_FREE_CLK>;
 			status = "disabled";
 		};
 
@@ -533,6 +611,7 @@
 			cdns,fifo-depth = <128>;
 			cdns,fifo-width = <4>;
 			cdns,trigger-address = <0x00000000>;
+			clocks = <&qspi_clk>;
 
 			status = "disabled";
 		};
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts
index 51d948323bfd..96c50d48289d 100644
--- a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts
@@ -41,6 +41,14 @@
 		/* We expect the bootloader to fill in the reg */
 		reg = <0 0 0 0>;
 	};
+
+	soc {
+		clocks {
+			osc1 {
+				clock-frequency = <25000000>;
+			};
+		};
+	};
 };
 
 &gpio1 {
@@ -98,6 +106,7 @@
 };
 
 &qspi {
+	status = "okay";
 	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm64/boot/dts/marvell/armada-7040.dtsi b/arch/arm64/boot/dts/marvell/armada-7040.dtsi
index 47247215770d..7a3198cd7a07 100644
--- a/arch/arm64/boot/dts/marvell/armada-7040.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-7040.dtsi
@@ -14,3 +14,31 @@
 	compatible = "marvell,armada7040", "marvell,armada-ap806-quad",
 		     "marvell,armada-ap806";
 };
+
+&smmu {
+	status = "okay";
+};
+
+&cp0_pcie0 {
+	iommu-map =
+		<0x0   &smmu 0x480 0x20>,
+		<0x100 &smmu 0x4a0 0x20>,
+		<0x200 &smmu 0x4c0 0x20>;
+	iommu-map-mask = <0x031f>;
+};
+
+&cp0_sata0 {
+	iommus = <&smmu 0x444>;
+};
+
+&cp0_sdhci0 {
+	iommus = <&smmu 0x445>;
+};
+
+&cp0_usb3_0 {
+	iommus = <&smmu 0x440>;
+};
+
+&cp0_usb3_1 {
+	iommus = <&smmu 0x441>;
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
index c8243da71041..eb01cc96ba7a 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
@@ -454,10 +454,7 @@
 	status = "okay";
 	phy-mode = "2500base-x";
 	phys = <&cp1_comphy5 2>;
-	fixed-link {
-		speed = <2500>;
-		full-duplex;
-	};
+	managed = "in-band-status";
 };
 
 &cp1_spi1 {
diff --git a/arch/arm64/boot/dts/marvell/armada-8040.dtsi b/arch/arm64/boot/dts/marvell/armada-8040.dtsi
index 7699b19224c2..79e8ce59baa8 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-8040.dtsi
@@ -15,6 +15,18 @@
 		     "marvell,armada-ap806";
 };
 
+&smmu {
+	status = "okay";
+};
+
+&cp0_pcie0 {
+	iommu-map =
+		<0x0   &smmu 0x480 0x20>,
+		<0x100 &smmu 0x4a0 0x20>,
+		<0x200 &smmu 0x4c0 0x20>;
+	iommu-map-mask = <0x031f>;
+};
+
 /* The RTC requires external oscillator. But on Aramda 80x0, the RTC clock
  * in CP master is not connected (by package) to the oscillator. So
  * disable it. However, the RTC clock in CP slave is connected to the
@@ -23,3 +35,31 @@
 &cp0_rtc {
 	status = "disabled";
 };
+
+&cp0_sata0 {
+	iommus = <&smmu 0x444>;
+};
+
+&cp0_sdhci0 {
+	iommus = <&smmu 0x445>;
+};
+
+&cp0_usb3_0 {
+	iommus = <&smmu 0x440>;
+};
+
+&cp0_usb3_1 {
+	iommus = <&smmu 0x441>;
+};
+
+&cp1_sata0 {
+	iommus = <&smmu 0x454>;
+};
+
+&cp1_usb3_0 {
+	iommus = <&smmu 0x450>;
+};
+
+&cp1_usb3_1 {
+	iommus = <&smmu 0x451>;
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
index 7f9b9a647717..12e477f1aeb9 100644
--- a/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-ap80x.dtsi
@@ -56,6 +56,24 @@
 			compatible = "simple-bus";
 			ranges = <0x0 0x0 0xf0000000 0x1000000>;
 
+			smmu: iommu@5000000 {
+				compatible = "marvell,ap806-smmu-500", "arm,mmu-500";
+				reg = <0x100000 0x100000>;
+				dma-coherent;
+				#iommu-cells = <1>;
+				#global-interrupts = <1>;
+				interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
 			gic: interrupt-controller@210000 {
 				compatible = "arm,gic-400";
 				#interrupt-cells = <3>;
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index a57af9da9f5c..3ee682c266cc 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -11,4 +11,5 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana-rev7.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt6358.dtsi b/arch/arm64/boot/dts/mediatek/mt6358.dtsi
index 9361ada0c497..fa159b20379e 100644
--- a/arch/arm64/boot/dts/mediatek/mt6358.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6358.dtsi
@@ -16,6 +16,8 @@
 		};
 
 		mt6358regulator: mt6358regulator {
+			compatible = "mediatek,mt6358-regulator";
+
 			mt6358_vdram1_reg: buck_vdram1 {
 				regulator-name = "vdram1";
 				regulator-min-microvolt = <500000>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 70b1ffcab7f0..5e046f9d48ce 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -167,7 +167,7 @@
 				 <&apmixedsys CLK_APMIXED_MAINPLL>;
 			clock-names = "cpu", "intermediate";
 			operating-points-v2 = <&cluster0_opp>;
-			capacity-dmips-mhz = <526>;
+			capacity-dmips-mhz = <740>;
 		};
 
 		cpu1: cpu@1 {
@@ -182,7 +182,7 @@
 				 <&apmixedsys CLK_APMIXED_MAINPLL>;
 			clock-names = "cpu", "intermediate";
 			operating-points-v2 = <&cluster0_opp>;
-			capacity-dmips-mhz = <526>;
+			capacity-dmips-mhz = <740>;
 		};
 
 		cpu2: cpu@100 {
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
index afd6ddbcbdf2..ae405bd8f06b 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
@@ -205,7 +205,7 @@
 		};
 	};
 
-	mmc0_pins_uhs: mmc0@0{
+	mmc0_pins_uhs: mmc0 {
 		pins_cmd_dat {
 			pinmux = <PINMUX_GPIO123__FUNC_MSDC0_DAT0>,
 				 <PINMUX_GPIO128__FUNC_MSDC0_DAT1>,
@@ -264,7 +264,7 @@
 		};
 	};
 
-	mmc1_pins_uhs: mmc1@0{
+	mmc1_pins_uhs: mmc1 {
 		pins_cmd_dat {
 			pinmux = <PINMUX_GPIO31__FUNC_MSDC1_CMD>,
 				   <PINMUX_GPIO32__FUNC_MSDC1_DAT0>,
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
new file mode 100644
index 000000000000..47113e275cb5
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2019 Google LLC
+ *
+ * Device-tree for Krane sku176.
+ *
+ * SKU is a 8-bit value (0xb0 == 176):
+ *  - Bits 7..4: Panel ID: 0xb (BOE)
+ *  - Bits 3..0: SKU ID:   0x0 (default)
+ */
+
+/dts-v1/;
+#include "mt8183-kukui-krane.dtsi"
+
+/ {
+	model = "MediaTek krane sku176 board";
+	compatible = "google,krane-sku176", "google,krane", "mediatek,mt8183";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi
new file mode 100644
index 000000000000..fbc471ccf805
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi
@@ -0,0 +1,343 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2019 Google LLC
+ */
+
+#include "mt8183-kukui.dtsi"
+
+/ {
+	ppvarn_lcd: ppvarn-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvarn_lcd";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ppvarn_lcd_en>;
+
+		enable-active-high;
+
+		gpio = <&pio 66 GPIO_ACTIVE_HIGH>;
+	};
+
+	ppvarp_lcd: ppvarp-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvarp_lcd";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ppvarp_lcd_en>;
+
+		enable-active-high;
+
+		gpio = <&pio 166 GPIO_ACTIVE_HIGH>;
+	};
+
+	pp1800_lcd: pp1800-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_lcd";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pp1800_lcd_en>;
+
+		enable-active-high;
+
+		gpio = <&pio 36 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&bluetooth {
+	firmware-name = "nvm_00440302_i2s_eu.bin";
+};
+
+&i2c0 {
+	status = "okay";
+
+	touchscreen4: touchscreen@5d {
+		compatible = "hid-over-i2c";
+		reg = <0x5d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&open_touch>;
+
+		interrupt-parent = <&pio>;
+		interrupts = <155 IRQ_TYPE_EDGE_FALLING>;
+
+		post-power-on-delay-ms = <10>;
+		hid-descr-addr = <0x0001>;
+	};
+};
+
+&mt6358_vcama2_reg {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	status = "okay";
+	clock-frequency = <400000>;
+
+	eeprom@58 {
+		compatible = "atmel,24c32";
+		reg = <0x58>;
+		pagesize = <32>;
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+	status = "okay";
+	clock-frequency = <400000>;
+
+	eeprom@54 {
+		compatible = "atmel,24c32";
+		reg = <0x54>;
+		pagesize = <32>;
+	};
+};
+
+&pio {
+	/* 192 lines */
+	gpio-line-names =
+		"SPI_AP_EC_CS_L",
+		"SPI_AP_EC_MOSI",
+		"SPI_AP_EC_CLK",
+		"I2S3_DO",
+		"USB_PD_INT_ODL",
+		"",
+		"",
+		"",
+		"",
+		"IT6505_HPD_L",
+		"I2S3_TDM_D3",
+		"SOC_I2C6_1V8_SCL",
+		"SOC_I2C6_1V8_SDA",
+		"DPI_D0",
+		"DPI_D1",
+		"DPI_D2",
+		"DPI_D3",
+		"DPI_D4",
+		"DPI_D5",
+		"DPI_D6",
+		"DPI_D7",
+		"DPI_D8",
+		"DPI_D9",
+		"DPI_D10",
+		"DPI_D11",
+		"DPI_HSYNC",
+		"DPI_VSYNC",
+		"DPI_DE",
+		"DPI_CK",
+		"AP_MSDC1_CLK",
+		"AP_MSDC1_DAT3",
+		"AP_MSDC1_CMD",
+		"AP_MSDC1_DAT0",
+		"AP_MSDC1_DAT2",
+		"AP_MSDC1_DAT1",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"OTG_EN",
+		"DRVBUS",
+		"DISP_PWM",
+		"DSI_TE",
+		"LCM_RST_1V8",
+		"AP_CTS_WIFI_RTS",
+		"AP_RTS_WIFI_CTS",
+		"SOC_I2C5_1V8_SCL",
+		"SOC_I2C5_1V8_SDA",
+		"SOC_I2C3_1V8_SCL",
+		"SOC_I2C3_1V8_SDA",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"SOC_I2C1_1V8_SDA",
+		"SOC_I2C0_1V8_SDA",
+		"SOC_I2C0_1V8_SCL",
+		"SOC_I2C1_1V8_SCL",
+		"AP_SPI_H1_MISO",
+		"AP_SPI_H1_CS_L",
+		"AP_SPI_H1_MOSI",
+		"AP_SPI_H1_CLK",
+		"I2S5_BCK",
+		"I2S5_LRCK",
+		"I2S5_DO",
+		"BOOTBLOCK_EN_L",
+		"MT8183_KPCOL0",
+		"SPI_AP_EC_MISO",
+		"UART_DBG_TX_AP_RX",
+		"UART_AP_TX_DBG_RX",
+		"I2S2_MCK",
+		"I2S2_BCK",
+		"CLK_5M_WCAM",
+		"CLK_2M_UCAM",
+		"I2S2_LRCK",
+		"I2S2_DI",
+		"SOC_I2C2_1V8_SCL",
+		"SOC_I2C2_1V8_SDA",
+		"SOC_I2C4_1V8_SCL",
+		"SOC_I2C4_1V8_SDA",
+		"",
+		"SCL8",
+		"SDA8",
+		"FCAM_PWDN_L",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"I2S_PMIC",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		/*
+		 * AP_FLASH_WP_L is crossystem ABI. Rev1 schematics
+		 * call it BIOS_FLASH_WP_R_L.
+		 */
+		"AP_FLASH_WP_L",
+		"EC_AP_INT_ODL",
+		"IT6505_INT_ODL",
+		"H1_INT_OD_L",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"AP_SPI_FLASH_MISO",
+		"AP_SPI_FLASH_CS_L",
+		"AP_SPI_FLASH_MOSI",
+		"AP_SPI_FLASH_CLK",
+		"DA7219_IRQ",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"";
+
+	ppvarp_lcd_en: ppvarp-lcd-en {
+		pins1 {
+			pinmux = <PINMUX_GPIO66__FUNC_GPIO66>;
+			output-low;
+		};
+	};
+
+	ppvarn_lcd_en: ppvarn-lcd-en {
+		pins1 {
+			pinmux = <PINMUX_GPIO166__FUNC_GPIO166>;
+			output-low;
+		};
+	};
+
+	pp1800_lcd_en: pp1800-lcd-en {
+		pins1 {
+			pinmux = <PINMUX_GPIO36__FUNC_GPIO36>;
+			output-low;
+		};
+	};
+
+	open_touch: open_touch {
+		irq_pin {
+			pinmux = <PINMUX_GPIO155__FUNC_GPIO155>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		rst_pin {
+			pinmux = <PINMUX_GPIO156__FUNC_GPIO156>;
+
+			/*
+			 * The pen driver doesn't currently support  driving
+			 * this reset line.  By specifying output-high here
+			 * we're relying on the fact that this pin has a default
+			 * pulldown at boot (which makes sure the pen was in
+			 * reset if it was powered) and then we set it high here
+			 * to take it out of reset.  Better would be if the pen
+			 * driver could control this and we could remove
+			 * "output-high" here.
+			 */
+			output-high;
+		};
+	};
+};
+
+&qca_wifi {
+	qcom,ath10k-calibration-variant = "LE_Krane";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
new file mode 100644
index 000000000000..f0a070535b34
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
@@ -0,0 +1,788 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (c) 2018 MediaTek Inc.
+ * Author: Ben Ho <ben.ho@mediatek.com>
+ *	   Erin Lo <erin.lo@mediatek.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "mt8183.dtsi"
+#include "mt6358.dtsi"
+
+/ {
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x80000000>;
+	};
+
+	clk32k: oscillator1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "clk32k";
+	};
+
+	it6505_pp18_reg: regulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "it6505_pp18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&pio 178 0>;
+		enable-active-high;
+	};
+
+	lcd_pp3300: regulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd_pp3300";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	bl_pp5000: regulator2 {
+		compatible = "regulator-fixed";
+		regulator-name = "bl_pp5000";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	mmc1_fixed_power: regulator3 {
+		compatible = "regulator-fixed";
+		regulator-name = "mmc1_power";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	mmc1_fixed_io: regulator4 {
+		compatible = "regulator-fixed";
+		regulator-name = "mmc1_io";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	pp1800_alw: regulator5 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_alw";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	pp3300_alw: regulator6 {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_alw";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	max98357a: codec0 {
+		compatible = "maxim,max98357a";
+		sdmode-gpios = <&pio 175 0>;
+	};
+
+	btsco: codec1 {
+		compatible = "linux,bt-sco";
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_pins_pwrseq>;
+
+		/* Toggle WIFI_ENABLE to reset the chip. */
+		reset-gpios = <&pio 119 1>;
+	};
+
+	wifi_wakeup: wifi-wakeup {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_pins_wakeup>;
+
+		wowlan {
+			label = "Wake on WiFi";
+			gpios = <&pio 113 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+
+	tboard_thermistor1: thermal-sensor1 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&auxadc 0>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <    (-5000) 4241
+						0 4063
+						5000 3856
+						10000 3621
+						15000 3364
+						20000 3091
+						25000 2810
+						30000 2526
+						35000 2247
+						40000 1982
+						45000 1734
+						50000 1507
+						55000 1305
+						60000 1122
+						65000 964
+						70000 827
+						75000 710
+						80000 606
+						85000 519
+						90000 445
+						95000 382
+						100000 330
+						105000 284
+						110000 245
+						115000 213
+						120000 183
+						125000 161>;
+	};
+
+	tboard_thermistor2: thermal-sensor2 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&auxadc 1>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <    (-5000) 4241
+						0 4063
+						5000 3856
+						10000 3621
+						15000 3364
+						20000 3091
+						25000 2810
+						30000 2526
+						35000 2247
+						40000 1982
+						45000 1734
+						50000 1507
+						55000 1305
+						60000 1122
+						65000 964
+						70000 827
+						75000 710
+						80000 606
+						85000 519
+						90000 445
+						95000 382
+						100000 330
+						105000 284
+						110000 245
+						115000 213
+						120000 183
+						125000 161>;
+	};
+};
+
+&auxadc {
+	status = "okay";
+};
+
+&cpu0 {
+	proc-supply = <&mt6358_vproc12_reg>;
+};
+
+&cpu1 {
+	proc-supply = <&mt6358_vproc12_reg>;
+};
+
+&cpu2 {
+	proc-supply = <&mt6358_vproc12_reg>;
+};
+
+&cpu3 {
+	proc-supply = <&mt6358_vproc12_reg>;
+};
+
+&cpu4 {
+	proc-supply = <&mt6358_vproc11_reg>;
+};
+
+&cpu5 {
+	proc-supply = <&mt6358_vproc11_reg>;
+};
+
+&cpu6 {
+	proc-supply = <&mt6358_vproc11_reg>;
+};
+
+&cpu7 {
+	proc-supply = <&mt6358_vproc11_reg>;
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+	clock-frequency = <400000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+	status = "okay";
+	clock-frequency = <100000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+};
+
+&i2c5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_pins>;
+	status = "okay";
+	clock-frequency = <100000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+};
+
+&i2c6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6_pins>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&mmc0 {
+	status = "okay";
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_pins_default>;
+	pinctrl-1 = <&mmc0_pins_uhs>;
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	cap-mmc-hw-reset;
+	no-sdio;
+	no-sd;
+	hs400-ds-delay = <0x12814>;
+	vmmc-supply = <&mt6358_vemc_reg>;
+	vqmmc-supply = <&mt6358_vio18_reg>;
+	assigned-clocks = <&topckgen CLK_TOP_MUX_MSDC50_0>;
+	assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_CK>;
+	non-removable;
+};
+
+&mmc1 {
+	status = "okay";
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc1_pins_default>;
+	pinctrl-1 = <&mmc1_pins_uhs>;
+	vmmc-supply = <&mmc1_fixed_power>;
+	vqmmc-supply = <&mmc1_fixed_io>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	max-frequency = <200000000>;
+	drv-type = <2>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	keep-power-in-suspend;
+	enable-sdio-wakeup;
+	cap-sdio-irq;
+	non-removable;
+	no-mmc;
+	no-sd;
+	assigned-clocks = <&topckgen CLK_TOP_MUX_MSDC30_1>;
+	assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	qca_wifi: qca-wifi@1 {
+		compatible = "qcom,ath10k";
+		reg = <1>;
+	};
+};
+
+&mt6358_vdram2_reg {
+	regulator-always-on;
+};
+
+&mt6358codec {
+	Avdd-supply = <&mt6358_vaud28_reg>;
+};
+
+&mt6358_vsim1_reg {
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <2700000>;
+};
+
+&mt6358_vsim2_reg {
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <2700000>;
+};
+
+&pio {
+	bt_pins: bt-pins {
+		pins_bt_en {
+			pinmux = <PINMUX_GPIO120__FUNC_GPIO120>;
+			output-low;
+		};
+	};
+
+	ec_ap_int_odl: ec_ap_int_odl {
+		pins1 {
+			pinmux = <PINMUX_GPIO151__FUNC_GPIO151>;
+			input-enable;
+			bias-pull-up;
+		};
+	};
+
+	h1_int_od_l: h1_int_od_l {
+		pins1 {
+			pinmux = <PINMUX_GPIO153__FUNC_GPIO153>;
+			input-enable;
+		};
+	};
+
+	i2c0_pins: i2c0 {
+		pins_bus {
+			pinmux = <PINMUX_GPIO82__FUNC_SDA0>,
+				 <PINMUX_GPIO83__FUNC_SCL0>;
+			mediatek,pull-up-adv = <3>;
+			mediatek,drive-strength-adv = <00>;
+		};
+	};
+
+	i2c1_pins: i2c1 {
+		pins_bus {
+			pinmux = <PINMUX_GPIO81__FUNC_SDA1>,
+				 <PINMUX_GPIO84__FUNC_SCL1>;
+			mediatek,pull-up-adv = <3>;
+			mediatek,drive-strength-adv = <00>;
+		};
+	};
+
+	i2c2_pins: i2c2 {
+		pins_bus {
+			pinmux = <PINMUX_GPIO103__FUNC_SCL2>,
+				 <PINMUX_GPIO104__FUNC_SDA2>;
+			bias-disable;
+			mediatek,drive-strength-adv = <00>;
+		};
+	};
+
+	i2c3_pins: i2c3 {
+		pins_bus {
+			pinmux = <PINMUX_GPIO50__FUNC_SCL3>,
+				 <PINMUX_GPIO51__FUNC_SDA3>;
+			mediatek,pull-up-adv = <3>;
+			mediatek,drive-strength-adv = <00>;
+		};
+	};
+
+	i2c4_pins: i2c4 {
+		pins_bus {
+			pinmux = <PINMUX_GPIO105__FUNC_SCL4>,
+				 <PINMUX_GPIO106__FUNC_SDA4>;
+			bias-disable;
+			mediatek,drive-strength-adv = <00>;
+		};
+	};
+
+	i2c5_pins: i2c5 {
+		pins_bus {
+			pinmux = <PINMUX_GPIO48__FUNC_SCL5>,
+				 <PINMUX_GPIO49__FUNC_SDA5>;
+			mediatek,pull-up-adv = <3>;
+			mediatek,drive-strength-adv = <00>;
+		};
+	};
+
+	i2c6_pins: i2c6 {
+		pins_bus {
+			pinmux = <PINMUX_GPIO11__FUNC_SCL6>,
+				 <PINMUX_GPIO12__FUNC_SDA6>;
+			bias-disable;
+		};
+	};
+
+	mmc0_pins_default: mmc0-pins-default {
+		pins_cmd_dat {
+			pinmux = <PINMUX_GPIO123__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO128__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO125__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO132__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO126__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO129__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO127__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO130__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO122__FUNC_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_14mA>;
+			mediatek,pull-up-adv = <01>;
+		};
+
+		pins_clk {
+			pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>;
+			drive-strength = <MTK_DRIVE_14mA>;
+			mediatek,pull-down-adv = <10>;
+		};
+
+		pins_rst {
+			pinmux = <PINMUX_GPIO133__FUNC_MSDC0_RSTB>;
+			drive-strength = <MTK_DRIVE_14mA>;
+			mediatek,pull-down-adv = <01>;
+		};
+	};
+
+	mmc0_pins_uhs: mmc0-pins-uhs {
+		pins_cmd_dat {
+			pinmux = <PINMUX_GPIO123__FUNC_MSDC0_DAT0>,
+				 <PINMUX_GPIO128__FUNC_MSDC0_DAT1>,
+				 <PINMUX_GPIO125__FUNC_MSDC0_DAT2>,
+				 <PINMUX_GPIO132__FUNC_MSDC0_DAT3>,
+				 <PINMUX_GPIO126__FUNC_MSDC0_DAT4>,
+				 <PINMUX_GPIO129__FUNC_MSDC0_DAT5>,
+				 <PINMUX_GPIO127__FUNC_MSDC0_DAT6>,
+				 <PINMUX_GPIO130__FUNC_MSDC0_DAT7>,
+				 <PINMUX_GPIO122__FUNC_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_14mA>;
+			mediatek,pull-up-adv = <01>;
+		};
+
+		pins_clk {
+			pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>;
+			drive-strength = <MTK_DRIVE_14mA>;
+			mediatek,pull-down-adv = <10>;
+		};
+
+		pins_ds {
+			pinmux = <PINMUX_GPIO131__FUNC_MSDC0_DSL>;
+			drive-strength = <MTK_DRIVE_14mA>;
+			mediatek,pull-down-adv = <10>;
+		};
+
+		pins_rst {
+			pinmux = <PINMUX_GPIO133__FUNC_MSDC0_RSTB>;
+			drive-strength = <MTK_DRIVE_14mA>;
+			mediatek,pull-up-adv = <01>;
+		};
+	};
+
+	mmc1_pins_default: mmc1-pins-default {
+		pins_cmd_dat {
+			pinmux = <PINMUX_GPIO31__FUNC_MSDC1_CMD>,
+				 <PINMUX_GPIO32__FUNC_MSDC1_DAT0>,
+				 <PINMUX_GPIO34__FUNC_MSDC1_DAT1>,
+				 <PINMUX_GPIO33__FUNC_MSDC1_DAT2>,
+				 <PINMUX_GPIO30__FUNC_MSDC1_DAT3>;
+			input-enable;
+			mediatek,pull-up-adv = <10>;
+		};
+
+		pins_clk {
+			pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>;
+			input-enable;
+			mediatek,pull-down-adv = <10>;
+		};
+	};
+
+	mmc1_pins_uhs: mmc1-pins-uhs {
+		pins_cmd_dat {
+			pinmux = <PINMUX_GPIO31__FUNC_MSDC1_CMD>,
+				 <PINMUX_GPIO32__FUNC_MSDC1_DAT0>,
+				 <PINMUX_GPIO34__FUNC_MSDC1_DAT1>,
+				 <PINMUX_GPIO33__FUNC_MSDC1_DAT2>,
+				 <PINMUX_GPIO30__FUNC_MSDC1_DAT3>;
+			drive-strength = <MTK_DRIVE_6mA>;
+			input-enable;
+			mediatek,pull-up-adv = <10>;
+		};
+
+		pins_clk {
+			pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>;
+			drive-strength = <MTK_DRIVE_8mA>;
+			mediatek,pull-down-adv = <10>;
+			input-enable;
+		};
+	};
+
+	spi0_pins: spi0 {
+		pins_spi{
+			pinmux = <PINMUX_GPIO85__FUNC_SPI0_MI>,
+				 <PINMUX_GPIO86__FUNC_GPIO86>,
+				 <PINMUX_GPIO87__FUNC_SPI0_MO>,
+				 <PINMUX_GPIO88__FUNC_SPI0_CLK>;
+			bias-disable;
+		};
+	};
+
+	spi1_pins: spi1 {
+		pins_spi{
+			pinmux = <PINMUX_GPIO161__FUNC_SPI1_A_MI>,
+				 <PINMUX_GPIO162__FUNC_SPI1_A_CSB>,
+				 <PINMUX_GPIO163__FUNC_SPI1_A_MO>,
+				 <PINMUX_GPIO164__FUNC_SPI1_A_CLK>;
+			bias-disable;
+		};
+	};
+
+	spi2_pins: spi2 {
+		pins_spi{
+			pinmux = <PINMUX_GPIO0__FUNC_SPI2_CSB>,
+				 <PINMUX_GPIO1__FUNC_SPI2_MO>,
+				 <PINMUX_GPIO2__FUNC_SPI2_CLK>;
+			bias-disable;
+		};
+		pins_spi_mi {
+			pinmux = <PINMUX_GPIO94__FUNC_SPI2_MI>;
+			mediatek,pull-down-adv = <00>;
+		};
+	};
+
+	spi3_pins: spi3 {
+		pins_spi{
+			pinmux = <PINMUX_GPIO21__FUNC_SPI3_MI>,
+				 <PINMUX_GPIO22__FUNC_SPI3_CSB>,
+				 <PINMUX_GPIO23__FUNC_SPI3_MO>,
+				 <PINMUX_GPIO24__FUNC_SPI3_CLK>;
+			bias-disable;
+		};
+	};
+
+	spi4_pins: spi4 {
+		pins_spi{
+			pinmux = <PINMUX_GPIO17__FUNC_SPI4_MI>,
+				 <PINMUX_GPIO18__FUNC_SPI4_CSB>,
+				 <PINMUX_GPIO19__FUNC_SPI4_MO>,
+				 <PINMUX_GPIO20__FUNC_SPI4_CLK>;
+			bias-disable;
+		};
+	};
+
+	spi5_pins: spi5 {
+		pins_spi{
+			pinmux = <PINMUX_GPIO13__FUNC_SPI5_MI>,
+				 <PINMUX_GPIO14__FUNC_SPI5_CSB>,
+				 <PINMUX_GPIO15__FUNC_SPI5_MO>,
+				 <PINMUX_GPIO16__FUNC_SPI5_CLK>;
+			bias-disable;
+		};
+	};
+
+	uart0_pins_default: uart0-pins-default {
+		pins_rx {
+			pinmux = <PINMUX_GPIO95__FUNC_URXD0>;
+			input-enable;
+			bias-pull-up;
+		};
+		pins_tx {
+			pinmux = <PINMUX_GPIO96__FUNC_UTXD0>;
+		};
+	};
+
+	uart1_pins_default: uart1-pins-default {
+		pins_rx {
+			pinmux = <PINMUX_GPIO121__FUNC_URXD1>;
+			input-enable;
+			bias-pull-up;
+		};
+		pins_tx {
+			pinmux = <PINMUX_GPIO115__FUNC_UTXD1>;
+		};
+		pins_rts {
+			pinmux = <PINMUX_GPIO47__FUNC_URTS1>;
+			output-enable;
+		};
+		pins_cts {
+			pinmux = <PINMUX_GPIO46__FUNC_UCTS1>;
+			input-enable;
+		};
+	};
+
+	uart1_pins_sleep: uart1-pins-sleep {
+		pins_rx {
+			pinmux = <PINMUX_GPIO121__FUNC_GPIO121>;
+			input-enable;
+			bias-pull-up;
+		};
+		pins_tx {
+			pinmux = <PINMUX_GPIO115__FUNC_UTXD1>;
+		};
+		pins_rts {
+			pinmux = <PINMUX_GPIO47__FUNC_URTS1>;
+			output-enable;
+		};
+		pins_cts {
+			pinmux = <PINMUX_GPIO46__FUNC_UCTS1>;
+			input-enable;
+		};
+	};
+
+	wifi_pins_pwrseq: wifi-pins-pwrseq {
+		pins_wifi_enable {
+			pinmux = <PINMUX_GPIO119__FUNC_GPIO119>;
+			output-low;
+		};
+	};
+
+	wifi_pins_wakeup: wifi-pins-wakeup {
+		pins_wifi_wakeup {
+			pinmux = <PINMUX_GPIO113__FUNC_GPIO113>;
+			input-enable;
+		};
+	};
+};
+
+&soc_data {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	mediatek,pad-select = <0>;
+	status = "okay";
+	cs-gpios = <&pio 86 GPIO_ACTIVE_LOW>;
+
+	cr50@0 {
+		compatible = "google,cr50";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&h1_int_od_l>;
+		interrupt-parent = <&pio>;
+		interrupts = <153 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+	mediatek,pad-select = <0>;
+	status = "okay";
+
+	w25q64dw: spi-flash@0 {
+		compatible = "winbond,w25q64dw", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <25000000>;
+	};
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins>;
+	mediatek,pad-select = <0>;
+	status = "okay";
+
+	cros_ec: cros-ec@0 {
+		compatible = "google,cros-ec-spi";
+		reg = <0>;
+		spi-max-frequency = <3000000>;
+		interrupt-parent = <&pio>;
+		interrupts = <151 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ec_ap_int_odl>;
+
+		i2c_tunnel: i2c-tunnel {
+			compatible = "google,cros-ec-i2c-tunnel";
+			google,remote-bus = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usbc_extcon: extcon0 {
+			compatible = "google,extcon-usbc-cros-ec";
+			google,usb-port-id = <0>;
+		};
+	};
+};
+
+&spi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi3_pins>;
+	mediatek,pad-select = <0>;
+	status = "disabled";
+};
+
+&spi4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi4_pins>;
+	mediatek,pad-select = <0>;
+	status = "disabled";
+};
+
+&spi5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi5_pins>;
+	mediatek,pad-select = <0>;
+	status = "disabled";
+};
+
+&ssusb {
+	dr_mode = "host";
+	wakeup-source;
+	vusb33-supply = <&mt6358_vusb_reg>;
+	status = "okay";
+};
+
+&u3phy {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_default>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&uart1_pins_default>;
+	pinctrl-1 = <&uart1_pins_sleep>;
+	status = "okay";
+	interrupts-extended = <&sysirq GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>,
+			      <&pio 121 IRQ_TYPE_EDGE_FALLING>;
+
+	bluetooth: bluetooth {
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_pins>;
+		status = "okay";
+		compatible = "qcom,qca6174-bt";
+		enable-gpios = <&pio 120 0>;
+		clocks = <&clk32k>;
+		firmware-name = "nvm_00440302_i2s.bin";
+	};
+};
+
+&usb_host {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	vusb33-supply = <&mt6358_vusb_reg>;
+	status = "okay";
+
+	hub@1 {
+		compatible = "usb5e3,610";
+		reg = <1>;
+	};
+};
+
+#include <arm/cros-ec-keyboard.dtsi>
+#include <arm/cros-ec-sbs.dtsi>
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 1e03c849dc5d..102105871db2 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -9,6 +9,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/reset-controller/mt8183-resets.h>
+#include <dt-bindings/phy/phy.h>
 #include "mt8183-pinfunc.h"
 
 / {
@@ -168,7 +169,7 @@
 				min-residency-us = <800>;
 			};
 
-			CLUSTER_SLEEP0: cluster-sleep@0 {
+			CLUSTER_SLEEP0: cluster-sleep-0 {
 				compatible = "arm,idle-state";
 				local-timer-stop;
 				arm,psci-suspend-param = <0x01010001>;
@@ -176,7 +177,7 @@
 				exit-latency-us = <400>;
 				min-residency-us = <1000>;
 			};
-			CLUSTER_SLEEP1: cluster-sleep@1 {
+			CLUSTER_SLEEP1: cluster-sleep-1 {
 				compatible = "arm,idle-state";
 				local-timer-stop;
 				arm,psci-suspend-param = <0x01010001>;
@@ -285,6 +286,12 @@
 			#reset-cells = <1>;
 		};
 
+		pericfg: syscon@10003000 {
+			compatible = "mediatek,mt8183-pericfg", "syscon";
+			reg = <0 0x10003000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
 		pio: pinctrl@10005000 {
 			compatible = "mediatek,mt8183-pinctrl";
 			reg = <0 0x10005000 0 0x1000>,
@@ -642,6 +649,36 @@
 			status = "disabled";
 		};
 
+		ssusb: usb@11201000 {
+			compatible ="mediatek,mt8183-mtu3", "mediatek,mtu3";
+			reg = <0 0x11201000 0 0x2e00>,
+			      <0 0x11203e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>;
+			phys = <&u2port0 PHY_TYPE_USB2>,
+			       <&u3port0 PHY_TYPE_USB3>;
+			clocks = <&infracfg CLK_INFRA_UNIPRO_SCK>,
+				 <&infracfg CLK_INFRA_USB>;
+			clock-names = "sys_ck", "ref_ck";
+			mediatek,syscon-wakeup = <&pericfg 0x400 0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			usb_host: xhci@11200000 {
+				compatible = "mediatek,mt8183-xhci",
+					     "mediatek,mtk-xhci";
+				reg = <0 0x11200000 0 0x1000>;
+				reg-names = "mac";
+				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_LOW>;
+				clocks = <&infracfg CLK_INFRA_UNIPRO_SCK>,
+					 <&infracfg CLK_INFRA_USB>;
+				clock-names = "sys_ck", "ref_ck";
+				status = "disabled";
+			};
+		};
+
 		audiosys: syscon@11220000 {
 			compatible = "mediatek,mt8183-audiosys", "syscon";
 			reg = <0 0x11220000 0 0x1000>;
@@ -678,6 +715,33 @@
 			reg = <0 0x11f10000 0 0x1000>;
 		};
 
+		u3phy: usb-phy@11f40000 {
+			compatible = "mediatek,mt8183-tphy",
+				     "mediatek,generic-tphy-v2";
+			#address-cells = <1>;
+			#phy-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x11f40000 0x1000>;
+			status = "okay";
+
+			u2port0: usb-phy@0 {
+				reg = <0x0 0x700>;
+				clocks = <&clk26m>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+				mediatek,discth = <15>;
+				status = "okay";
+			};
+
+			u3port0: usb-phy@0700 {
+				reg = <0x0700 0x900>;
+				clocks = <&clk26m>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+				status = "okay";
+			};
+		};
+
 		mfgcfg: syscon@13000000 {
 			compatible = "mediatek,mt8183-mfgcfg", "syscon";
 			reg = <0 0x13000000 0 0x1000>;
diff --git a/arch/arm64/boot/dts/microchip/Makefile b/arch/arm64/boot/dts/microchip/Makefile
new file mode 100644
index 000000000000..c6e0313eea0f
--- /dev/null
+++ b/arch/arm64/boot/dts/microchip/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_SPARX5) += sparx5_pcb125.dtb
+dtb-$(CONFIG_ARCH_SPARX5) += sparx5_pcb134.dtb sparx5_pcb134_emmc.dtb
+dtb-$(CONFIG_ARCH_SPARX5) += sparx5_pcb135.dtb sparx5_pcb135_emmc.dtb
diff --git a/arch/arm64/boot/dts/microchip/sparx5.dtsi b/arch/arm64/boot/dts/microchip/sparx5.dtsi
new file mode 100644
index 000000000000..cf712e80615d
--- /dev/null
+++ b/arch/arm64/boot/dts/microchip/sparx5.dtsi
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "microchip,sparx5";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+		L2_0: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	lcpll_clk: lcpll-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <2500000000>;
+	};
+
+	clks: clock-controller@61110000c {
+		compatible = "microchip,sparx5-dpll";
+		#clock-cells = <1>;
+		clocks = <&lcpll_clk>;
+		reg = <0x6 0x1110000c 0x24>;
+	};
+
+	ahb_clk: ahb-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <250000000>;
+	};
+
+	sys_clk: sys-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <625000000>;
+	};
+
+	axi: axi@600000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		gic: interrupt-controller@600300000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			interrupt-controller;
+			reg = <0x6 0x00300000 0x10000>,	/* GIC Dist */
+			      <0x6 0x00340000 0xc0000>,	/* GICR */
+			      <0x6 0x00200000 0x2000>,	/* GICC */
+			      <0x6 0x00210000 0x2000>,  /* GICV */
+			      <0x6 0x00220000 0x2000>;  /* GICH */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		uart0: serial@600100000 {
+			pinctrl-0 = <&uart_pins>;
+			pinctrl-names = "default";
+			compatible = "ns16550a";
+			reg = <0x6 0x00100000 0x20>;
+			clocks = <&ahb_clk>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+			status = "disabled";
+		};
+
+		uart1: serial@600102000 {
+			pinctrl-0 = <&uart2_pins>;
+			pinctrl-names = "default";
+			compatible = "ns16550a";
+			reg = <0x6 0x00102000 0x20>;
+			clocks = <&ahb_clk>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+
+			status = "disabled";
+		};
+
+		timer1: timer@600105000 {
+			compatible = "snps,dw-apb-timer";
+			reg = <0x6 0x00105000 0x1000>;
+			clocks = <&ahb_clk>;
+			clock-names = "timer";
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		gpio: pinctrl@6110101e0 {
+			compatible = "microchip,sparx5-pinctrl";
+			reg = <0x6 0x110101e0 0x90>, <0x6 0x10508010 0x100>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&gpio 0 0 64>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+
+			uart_pins: uart-pins {
+				pins = "GPIO_10", "GPIO_11";
+				function = "uart";
+			};
+
+			uart2_pins: uart2-pins {
+				pins = "GPIO_26", "GPIO_27";
+				function = "uart2";
+			};
+
+			i2c_pins: i2c-pins {
+				pins = "GPIO_14", "GPIO_15";
+				function = "twi";
+			};
+
+			i2c2_pins: i2c2-pins {
+				pins = "GPIO_28", "GPIO_29";
+				function = "twi2";
+			};
+		};
+
+		i2c0: i2c@600101000 {
+			compatible = "snps,designware-i2c";
+			status = "disabled";
+			pinctrl-0 = <&i2c_pins>;
+			pinctrl-names = "default";
+			reg = <0x6 0x00101000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-sda-hold-time-ns = <300>;
+			clock-frequency = <100000>;
+			clocks = <&ahb_clk>;
+		};
+
+		i2c1: i2c@600103000 {
+			compatible = "snps,designware-i2c";
+			status = "disabled";
+			pinctrl-0 = <&i2c2_pins>;
+			pinctrl-names = "default";
+			reg = <0x6 0x00103000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			i2c-sda-hold-time-ns = <300>;
+			clock-frequency = <100000>;
+			clocks = <&ahb_clk>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts b/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts
new file mode 100644
index 000000000000..91ee5b6cfc37
--- /dev/null
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb125.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
+ */
+
+/dts-v1/;
+#include "sparx5_pcb_common.dtsi"
+
+/ {
+	model = "Sparx5 PCB125 Reference Board";
+	compatible = "microchip,sparx5-pcb125", "microchip,sparx5";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x10000000>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb134.dts b/arch/arm64/boot/dts/microchip/sparx5_pcb134.dts
new file mode 100644
index 000000000000..feee4e99ff57
--- /dev/null
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb134.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
+ */
+
+/dts-v1/;
+#include "sparx5_pcb134_board.dtsi"
+
+/ {
+	model = "Sparx5 PCB134 Reference Board (NAND)";
+	compatible = "microchip,sparx5-pcb134", "microchip,sparx5";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x10000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
new file mode 100644
index 000000000000..18a535a04368
--- /dev/null
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
@@ -0,0 +1,252 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
+ */
+
+/dts-v1/;
+#include "sparx5_pcb_common.dtsi"
+
+/{
+	aliases {
+	    i2c0   = &i2c0;
+	    i2c100 = &i2c100;
+	    i2c101 = &i2c101;
+	    i2c102 = &i2c102;
+	    i2c103 = &i2c103;
+	    i2c104 = &i2c104;
+	    i2c105 = &i2c105;
+	    i2c106 = &i2c106;
+	    i2c107 = &i2c107;
+	    i2c108 = &i2c108;
+	    i2c109 = &i2c109;
+	    i2c110 = &i2c110;
+	    i2c111 = &i2c111;
+	    i2c112 = &i2c112;
+	    i2c113 = &i2c113;
+	    i2c114 = &i2c114;
+	    i2c115 = &i2c115;
+	    i2c116 = &i2c116;
+	    i2c117 = &i2c117;
+	    i2c118 = &i2c118;
+	    i2c119 = &i2c119;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+};
+
+&gpio {
+	i2cmux_pins_i: i2cmux-pins-i {
+	       pins = "GPIO_16", "GPIO_17", "GPIO_18", "GPIO_19",
+		      "GPIO_20", "GPIO_22", "GPIO_36", "GPIO_35",
+		      "GPIO_50", "GPIO_51", "GPIO_56", "GPIO_57";
+		function = "twi_scl_m";
+		output-low;
+	};
+	i2cmux_0: i2cmux-0 {
+		pins = "GPIO_16";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_1: i2cmux-1 {
+		pins = "GPIO_17";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_2: i2cmux-2 {
+		pins = "GPIO_18";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_3: i2cmux-3 {
+		pins = "GPIO_19";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_4: i2cmux-4 {
+		pins = "GPIO_20";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_5: i2cmux-5 {
+		pins = "GPIO_22";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_6: i2cmux-6 {
+		pins = "GPIO_36";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_7: i2cmux-7 {
+		pins = "GPIO_35";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_8: i2cmux-8 {
+		pins = "GPIO_50";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_9: i2cmux-9 {
+		pins = "GPIO_51";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_10: i2cmux-10 {
+		pins = "GPIO_56";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_11: i2cmux-11 {
+		pins = "GPIO_57";
+		function = "twi_scl_m";
+		output-high;
+	};
+};
+
+&axi {
+	i2c0_imux: i2c0-imux@0 {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-parent = <&i2c0>;
+	};
+	i2c0_emux: i2c0-emux@0 {
+		compatible = "i2c-mux-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-parent = <&i2c0>;
+	};
+};
+
+&i2c0_imux {
+	pinctrl-names =
+		"i2c100", "i2c101", "i2c102", "i2c103",
+		"i2c104", "i2c105", "i2c106", "i2c107",
+		"i2c108", "i2c109", "i2c110", "i2c111", "idle";
+	pinctrl-0 = <&i2cmux_0>;
+	pinctrl-1 = <&i2cmux_1>;
+	pinctrl-2 = <&i2cmux_2>;
+	pinctrl-3 = <&i2cmux_3>;
+	pinctrl-4 = <&i2cmux_4>;
+	pinctrl-5 = <&i2cmux_5>;
+	pinctrl-6 = <&i2cmux_6>;
+	pinctrl-7 = <&i2cmux_7>;
+	pinctrl-8 = <&i2cmux_8>;
+	pinctrl-9 = <&i2cmux_9>;
+	pinctrl-10 = <&i2cmux_10>;
+	pinctrl-11 = <&i2cmux_11>;
+	pinctrl-12 = <&i2cmux_pins_i>;
+	i2c100: i2c_sfp1 {
+		reg = <0x0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c101: i2c_sfp2 {
+		reg = <0x1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c102: i2c_sfp3 {
+		reg = <0x2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c103: i2c_sfp4 {
+		reg = <0x3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c104: i2c_sfp5 {
+		reg = <0x4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c105: i2c_sfp6 {
+		reg = <0x5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c106: i2c_sfp7 {
+		reg = <0x6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c107: i2c_sfp8 {
+		reg = <0x7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c108: i2c_sfp9 {
+		reg = <0x8>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c109: i2c_sfp10 {
+		reg = <0x9>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c110: i2c_sfp11 {
+		reg = <0xa>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c111: i2c_sfp12 {
+		reg = <0xb>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
+
+&i2c0_emux {
+	mux-gpios = <&gpio 55 GPIO_ACTIVE_HIGH
+		     &gpio 60 GPIO_ACTIVE_HIGH
+		     &gpio 61 GPIO_ACTIVE_HIGH
+		     &gpio 54 GPIO_ACTIVE_HIGH>;
+	idle-state = <0x8>;
+	i2c112: i2c_sfp13 {
+		reg = <0x0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c113: i2c_sfp14 {
+		reg = <0x1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c114: i2c_sfp15 {
+		reg = <0x2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c115: i2c_sfp16 {
+		reg = <0x3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c116: i2c_sfp17 {
+		reg = <0x4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c117: i2c_sfp18 {
+		reg = <0x5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c118: i2c_sfp19 {
+		reg = <0x6>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c119: i2c_sfp20 {
+		reg = <0x7>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb134_emmc.dts b/arch/arm64/boot/dts/microchip/sparx5_pcb134_emmc.dts
new file mode 100644
index 000000000000..10081a66961b
--- /dev/null
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb134_emmc.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
+ */
+
+/dts-v1/;
+#include "sparx5_pcb134_board.dtsi"
+
+/ {
+	model = "Sparx5 PCB134 Reference Board (eMMC enabled)";
+	compatible = "microchip,sparx5-pcb134", "microchip,sparx5";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x10000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb135.dts b/arch/arm64/boot/dts/microchip/sparx5_pcb135.dts
new file mode 100644
index 000000000000..20e409a9be19
--- /dev/null
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb135.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
+ */
+
+/dts-v1/;
+#include "sparx5_pcb135_board.dtsi"
+
+/ {
+	model = "Sparx5 PCB135 Reference Board (NAND)";
+	compatible = "microchip,sparx5-pcb135", "microchip,sparx5";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x10000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi
new file mode 100644
index 000000000000..d71f11a10b3d
--- /dev/null
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
+ */
+
+/dts-v1/;
+#include "sparx5_pcb_common.dtsi"
+
+/{
+	aliases {
+	    i2c0   = &i2c0;
+	    i2c152 = &i2c152;
+	    i2c153 = &i2c153;
+	    i2c154 = &i2c154;
+	    i2c155 = &i2c155;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
+		priority = <200>;
+	};
+};
+
+&gpio {
+	i2cmux_pins_i: i2cmux-pins-i {
+	       pins = "GPIO_35", "GPIO_36",
+		      "GPIO_50", "GPIO_51";
+		function = "twi_scl_m";
+		output-low;
+	};
+	i2cmux_s29: i2cmux-0 {
+		pins = "GPIO_35";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_s30: i2cmux-1 {
+		pins = "GPIO_36";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_s31: i2cmux-2 {
+		pins = "GPIO_50";
+		function = "twi_scl_m";
+		output-high;
+	};
+	i2cmux_s32: i2cmux-3 {
+		pins = "GPIO_51";
+		function = "twi_scl_m";
+		output-high;
+	};
+};
+
+&axi {
+	i2c0_imux: i2c0-imux@0 {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-parent = <&i2c0>;
+	};
+};
+
+&i2c0_imux {
+	pinctrl-names =
+		"i2c152", "i2c153", "i2c154", "i2c155",
+		"idle";
+	pinctrl-0 = <&i2cmux_s29>;
+	pinctrl-1 = <&i2cmux_s30>;
+	pinctrl-2 = <&i2cmux_s31>;
+	pinctrl-3 = <&i2cmux_s32>;
+	pinctrl-4 = <&i2cmux_pins_i>;
+	i2c152: i2c_sfp1 {
+		reg = <0x0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c153: i2c_sfp2 {
+		reg = <0x1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c154: i2c_sfp3 {
+		reg = <0x2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+	i2c155: i2c_sfp4 {
+		reg = <0x3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb135_emmc.dts b/arch/arm64/boot/dts/microchip/sparx5_pcb135_emmc.dts
new file mode 100644
index 000000000000..741f0e12260e
--- /dev/null
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb135_emmc.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
+ */
+
+/dts-v1/;
+#include "sparx5_pcb135_board.dtsi"
+
+/ {
+	model = "Sparx5 PCB135 Reference Board (eMMC enabled)";
+	compatible = "microchip,sparx5-pcb135", "microchip,sparx5";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x10000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb_common.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb_common.dtsi
new file mode 100644
index 000000000000..9d1a082de3e2
--- /dev/null
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb_common.dtsi
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries.
+ */
+
+/dts-v1/;
+#include "sparx5.dtsi"
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/nvidia/Makefile b/arch/arm64/boot/dts/nvidia/Makefile
index bcd018c3162b..2273fc5db19c 100644
--- a/arch/arm64/boot/dts/nvidia/Makefile
+++ b/arch/arm64/boot/dts/nvidia/Makefile
@@ -8,3 +8,4 @@ dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-smaug.dtb
 dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2894-0050-a08.dtb
 dtb-$(CONFIG_ARCH_TEGRA_186_SOC) += tegra186-p2771-0000.dtb
 dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p2972-0000.dtb
+dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p3509-0000+p3668-0000.dtb
diff --git a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts
index 9f3206c63900..6e5f8465669e 100644
--- a/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra132-norrin.dts
@@ -18,7 +18,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x0 0x80000000>;
 	};
@@ -39,6 +39,9 @@
 		sor@54540000 {
 			status = "okay";
 
+			avdd-io-hdmi-dp-supply = <&vdd_3v3_hdmi>;
+			vdd-hdmi-dp-pll-supply = <&vdd_hdmi_pll>;
+
 			nvidia,dpaux = <&dpaux>;
 			nvidia,panel = <&panel>;
 		};
@@ -671,7 +674,7 @@
 					regulator-boot-on;
 				};
 
-				ldo0 {
+				avdd_1v05_run: ldo0 {
 					regulator-name = "+1.05_RUN_AVDD";
 					regulator-min-microvolt = <1050000>;
 					regulator-max-microvolt = <1050000>;
@@ -781,7 +784,6 @@
 				battery: smart-battery {
 					compatible = "sbs,sbs-battery";
 					reg = <0xb>;
-					battery-name = "battery";
 					sbs,i2c-retry-count = <2>;
 					sbs,poll-retry-count = <10>;
 				/*	power-supplies = <&charger>; */
@@ -893,13 +895,108 @@
 		nvidia,reset-gpio = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
 	};
 
+	usb@70090000 {
+		phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, /* 1st USB A */
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, /* Internal USB */
+		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, /* 2nd USB A */
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>, /* 1st USB A */
+		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>; /* 2nd USB A */
+		phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0", "usb3-1";
+
+		avddio-pex-supply = <&vdd_1v05_run>;
+		dvddio-pex-supply = <&vdd_1v05_run>;
+		avdd-usb-supply = <&vdd_3v3_lp0>;
+		hvdd-usb-ss-supply = <&vdd_3v3_lp0>;
+
+		status = "okay";
+	};
+
+	padctl@7009f000 {
+		avdd-pll-utmip-supply = <&vddio_1v8>;
+		avdd-pll-erefe-supply = <&avdd_1v05_run>;
+		avdd-pex-pll-supply = <&vdd_1v05_run>;
+		hvdd-pex-pll-e-supply = <&vdd_3v3_lp0>;
+
+		pads {
+			usb2 {
+				status = "okay";
+
+				lanes {
+					usb2-0 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+
+					usb2-1 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+
+					usb2-2 {
+						nvidia,function = "xusb";
+						status = "okay";
+					};
+				};
+			};
+
+			pcie {
+				status = "okay";
+
+				lanes {
+					pcie-0 {
+						nvidia,function = "usb3-ss";
+						status = "okay";
+					};
+
+					pcie-1 {
+						nvidia,function = "usb3-ss";
+						status = "okay";
+					};
+				};
+			};
+		};
+
+		ports {
+			usb2-0 {
+				status = "okay";
+				mode = "otg";
+
+				vbus-supply = <&vdd_usb1_vbus>;
+			};
+
+			usb2-1 {
+				status = "okay";
+				mode = "host";
+
+				vbus-supply = <&vdd_run_cam>;
+			};
+
+			usb2-2 {
+				status = "okay";
+				mode = "host";
+
+				vbus-supply = <&vdd_usb3_vbus>;
+			};
+
+			usb3-0 {
+				nvidia,usb2-companion = <0>;
+				status = "okay";
+			};
+
+			usb3-1 {
+				nvidia,usb2-companion = <2>;
+				status = "okay";
+			};
+		};
+	};
+
 	/* WIFI/BT module */
-	sdhci@700b0000 {
+	mmc@700b0000 {
 		status = "disabled";
 	};
 
 	/* external SD/MMC */
-	sdhci@700b0400 {
+	mmc@700b0400 {
 		cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
 		power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
 		wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_HIGH>;
@@ -909,39 +1006,12 @@
 	};
 
 	/* EMMC 4.51 */
-	sdhci@700b0600 {
+	mmc@700b0600 {
 		status = "okay";
 		bus-width = <8>;
 		non-removable;
 	};
 
-	usb@7d000000 {
-		status = "okay";
-	};
-
-	usb-phy@7d000000 {
-		status = "okay";
-		vbus-supply = <&vdd_usb1_vbus>;
-	};
-
-	usb@7d004000 {
-		status = "okay";
-	};
-
-	usb-phy@7d004000 {
-		status = "okay";
-		vbus-supply = <&vdd_run_cam>;
-	};
-
-	usb@7d008000 {
-		status = "okay";
-	};
-
-	usb-phy@7d008000 {
-		status = "okay";
-		vbus-supply = <&vdd_usb3_vbus>;
-	};
-
 	backlight: backlight {
 		compatible = "pwm-backlight";
 
@@ -955,17 +1025,10 @@
 		backlight-boot-off;
 	};
 
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock@0 {
-			compatible = "fixed-clock";
-			reg=<0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
+	clk32k_in: clock@0 {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
 	};
 
 	gpio-keys {
@@ -991,146 +1054,144 @@
 
 	panel: panel {
 		compatible = "innolux,n116bge";
+		power-supply = <&vdd_3v3_panel>;
 		backlight = <&backlight>;
 		ddc-i2c-bus = <&dpaux>;
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
+	vdd_mux: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "+VDD_MUX";
+		regulator-min-microvolt = <19000000>;
+		regulator-max-microvolt = <19000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
 
-		vdd_mux: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "+VDD_MUX";
-			regulator-min-microvolt = <19000000>;
-			regulator-max-microvolt = <19000000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
+	vdd_5v0_sys: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_SYS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd_mux>;
+	};
 
-		vdd_5v0_sys: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "+5V_SYS";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-			regulator-boot-on;
-			vin-supply = <&vdd_mux>;
-		};
+	vdd_3v3_sys: regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_SYS";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd_mux>;
+	};
 
-		vdd_3v3_sys: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "+3.3V_SYS";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-			regulator-boot-on;
-			vin-supply = <&vdd_mux>;
-		};
+	vdd_3v3_run: regulator@3 {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_RUN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&as3722 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
 
-		vdd_3v3_run: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "+3.3V_RUN";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&as3722 1 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_3v3_sys>;
-		};
+	vdd_3v3_hdmi: regulator@4 {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vdd_3v3_run>;
+	};
 
-		vdd_3v3_hdmi: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			vin-supply = <&vdd_3v3_run>;
-		};
+	vdd_led: regulator@5 {
+		compatible = "regulator-fixed";
+		regulator-name = "+VDD_LED";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_mux>;
+	};
 
-		vdd_led: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			regulator-name = "+VDD_LED";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_mux>;
-		};
+	vdd_usb1_vbus: regulator@6 {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_USB_HS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		gpio-open-drain;
+		vin-supply = <&vdd_5v0_sys>;
+	};
 
-		vdd_usb1_vbus: regulator@6 {
-			compatible = "regulator-fixed";
-			reg = <6>;
-			regulator-name = "+5V_USB_HS";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			gpio-open-drain;
-			vin-supply = <&vdd_5v0_sys>;
-		};
+	vdd_usb3_vbus: regulator@7 {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_USB_SS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		gpio-open-drain;
+		vin-supply = <&vdd_5v0_sys>;
+	};
 
-		vdd_usb3_vbus: regulator@7 {
-			compatible = "regulator-fixed";
-			reg = <7>;
-			regulator-name = "+5V_USB_SS";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			gpio-open-drain;
-			vin-supply = <&vdd_5v0_sys>;
-		};
+	vdd_3v3_panel: regulator@8 {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_PANEL";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&as3722 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
 
-		vdd_3v3_panel: regulator@8 {
-			compatible = "regulator-fixed";
-			reg = <8>;
-			regulator-name = "+3.3V_PANEL";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&as3722 4 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_3v3_sys>;
-		};
+	vdd_hdmi_pll: regulator@9 {
+		compatible = "regulator-fixed";
+		regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL_AP_GATE";
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1050000>;
+		gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+		vin-supply = <&vdd_1v05_run>;
+	};
 
-		vdd_hdmi_pll: regulator@9 {
-			compatible = "regulator-fixed";
-			reg = <9>;
-			regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL_AP_GATE";
-			regulator-min-microvolt = <1050000>;
-			regulator-max-microvolt = <1050000>;
-			gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
-			vin-supply = <&vdd_1v05_run>;
-		};
+	vdd_5v0_hdmi: regulator@10 {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_HDMI_CON";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
 
-		vdd_5v0_hdmi: regulator@10 {
-			compatible = "regulator-fixed";
-			reg = <10>;
-			regulator-name = "+5V_HDMI_CON";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_5v0_sys>;
-		};
+	vdd_5v0_ts: regulator@11 {
+		compatible = "regulator-fixed";
+		regulator-name = "+5V_VDD_TS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-		vdd_5v0_ts: regulator@11 {
-			compatible = "regulator-fixed";
-			reg = <11>;
-			regulator-name = "+5V_VDD_TS";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	vdd_3v3_lp0: regulator@12 {
+		compatible = "regulator-fixed";
+		regulator-name = "+3.3V_LP0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		/*
+		 * TODO: find a way to wire this up with the USB EHCI
+		 * controllers so that it can be enabled on demand.
+		 */
+		regulator-always-on;
+		gpio = <&as3722 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
 	};
 };
diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
index 11a1bb428595..e40281510c0c 100644
--- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi
@@ -17,9 +17,9 @@
 	pcie@1003000 {
 		compatible = "nvidia,tegra124-pcie";
 		device_type = "pci";
-		reg = <0x0 0x01003000 0x0 0x00000800   /* PADS registers */
-		       0x0 0x01003800 0x0 0x00000800   /* AFI registers */
-		       0x0 0x02000000 0x0 0x10000000>; /* configuration space */
+		reg = <0x0 0x01003000 0x0 0x00000800>, /* PADS registers */
+		      <0x0 0x01003800 0x0 0x00000800>, /* AFI registers */
+		      <0x0 0x02000000 0x0 0x10000000>; /* configuration space */
 		reg-names = "pads", "afi", "cs";
 		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
 			     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
@@ -33,11 +33,11 @@
 		#address-cells = <3>;
 		#size-cells = <2>;
 
-		ranges = <0x82000000 0 0x01000000 0x0 0x01000000 0 0x00001000   /* port 0 configuration space */
-			  0x82000000 0 0x01001000 0x0 0x01001000 0 0x00001000   /* port 1 configuration space */
-			  0x81000000 0 0x0        0x0 0x12000000 0 0x00010000   /* downstream I/O (64 KiB) */
-			  0x82000000 0 0x13000000 0x0 0x13000000 0 0x0d000000   /* non-prefetchable memory (208 MiB) */
-			  0xc2000000 0 0x20000000 0x0 0x20000000 0 0x20000000>; /* prefetchable memory (512 MiB) */
+		ranges = <0x02000000 0 0x01000000 0x0 0x01000000 0 0x00001000>, /* port 0 configuration space */
+			 <0x02000000 0 0x01001000 0x0 0x01001000 0 0x00001000>, /* port 1 configuration space */
+			 <0x01000000 0 0x0        0x0 0x12000000 0 0x00010000>, /* downstream I/O (64 KiB) */
+			 <0x02000000 0 0x13000000 0x0 0x13000000 0 0x0d000000>, /* non-prefetchable memory (208 MiB) */
+			 <0x42000000 0 0x20000000 0x0 0x20000000 0 0x20000000>; /* prefetchable memory (512 MiB) */
 
 		clocks = <&tegra_car TEGRA124_CLK_PCIE>,
 			 <&tegra_car TEGRA124_CLK_AFI>,
@@ -50,9 +50,6 @@
 		reset-names = "pex", "afi", "pcie_x";
 		status = "disabled";
 
-		phys = <&padctl TEGRA_XUSB_PADCTL_PCIE>;
-		phy-names = "pcie";
-
 		pci@1,0 {
 			device_type = "pci";
 			assigned-addresses = <0x82000800 0 0x01000000 0 0x1000>;
@@ -83,10 +80,12 @@
 	};
 
 	host1x@50000000 {
-		compatible = "nvidia,tegra124-host1x", "simple-bus";
+		compatible = "nvidia,tegra132-host1x",
+			     "nvidia,tegra124-host1x";
 		reg = <0x0 0x50000000 0x0 0x00034000>;
 		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
 			     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */
+		interrupt-names = "syncpt", "host1x";
 		clocks = <&tegra_car TEGRA124_CLK_HOST1X>;
 		clock-names = "host1x";
 		resets = <&tegra_car 28>;
@@ -101,9 +100,8 @@
 			compatible = "nvidia,tegra124-dc";
 			reg = <0x0 0x54200000 0x0 0x00040000>;
 			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA124_CLK_DISP1>,
-				 <&tegra_car TEGRA124_CLK_PLL_P>;
-			clock-names = "dc", "parent";
+			clocks = <&tegra_car TEGRA124_CLK_DISP1>;
+			clock-names = "dc";
 			resets = <&tegra_car 27>;
 			reset-names = "dc";
 
@@ -116,9 +114,8 @@
 			compatible = "nvidia,tegra124-dc";
 			reg = <0x0 0x54240000 0x0 0x00040000>;
 			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA124_CLK_DISP2>,
-				 <&tegra_car TEGRA124_CLK_PLL_P>;
-			clock-names = "dc", "parent";
+			clocks = <&tegra_car TEGRA124_CLK_DISP2>;
+			clock-names = "dc";
 			resets = <&tegra_car 26>;
 			reset-names = "dc";
 
@@ -144,10 +141,11 @@
 			reg = <0x0 0x54540000 0x0 0x00040000>;
 			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&tegra_car TEGRA124_CLK_SOR0>,
+				 <&tegra_car TEGRA124_CLK_SOR0_OUT>,
 				 <&tegra_car TEGRA124_CLK_PLL_D_OUT0>,
 				 <&tegra_car TEGRA124_CLK_PLL_DP>,
 				 <&tegra_car TEGRA124_CLK_CLK_M>;
-			clock-names = "sor", "parent", "dp", "safe";
+			clock-names = "sor", "out", "parent", "dp", "safe";
 			resets = <&tegra_car 182>;
 			reset-names = "sor";
 			status = "disabled";
@@ -163,6 +161,11 @@
 			resets = <&tegra_car 181>;
 			reset-names = "dpaux";
 			status = "disabled";
+
+			i2c-bus {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
 		};
 	};
 
@@ -607,7 +610,7 @@
 	};
 
 	emc: external-memory-controller@7001b000 {
-		compatible = "nvidia,tegra132-emc", "nvidia,tegra124-emc";
+		compatible = "nvidia,tegra132-emc";
 		reg = <0x0 0x7001b000 0x0 0x1000>;
 		clocks = <&tegra_car TEGRA124_CLK_EMC>;
 		clock-names = "emc";
@@ -629,8 +632,6 @@
 			 <&tegra_car 123>,
 			 <&tegra_car 129>;
 		reset-names = "sata", "sata-oob", "sata-cold";
-		phys = <&padctl TEGRA_XUSB_PADCTL_SATA>;
-		phy-names = "sata-phy";
 		status = "disabled";
 	};
 
@@ -650,6 +651,41 @@
 		status = "disabled";
 	};
 
+	usb@70090000 {
+		compatible = "nvidia,tegra132-xusb", "nvidia,tegra124-xusb";
+		reg = <0x0 0x70090000 0x0 0x8000>,
+		      <0x0 0x70098000 0x0 0x1000>,
+		      <0x0 0x70099000 0x0 0x1000>;
+		reg-names = "hcd", "fpci", "ipfs";
+
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+
+		clocks = <&tegra_car TEGRA124_CLK_XUSB_HOST>,
+			 <&tegra_car TEGRA124_CLK_XUSB_HOST_SRC>,
+			 <&tegra_car TEGRA124_CLK_XUSB_FALCON_SRC>,
+			 <&tegra_car TEGRA124_CLK_XUSB_SS>,
+			 <&tegra_car TEGRA124_CLK_XUSB_SS_SRC>,
+			 <&tegra_car TEGRA124_CLK_XUSB_SS_DIV2>,
+			 <&tegra_car TEGRA124_CLK_XUSB_HS_SRC>,
+			 <&tegra_car TEGRA124_CLK_XUSB_FS_SRC>,
+			 <&tegra_car TEGRA124_CLK_PLL_U_480M>,
+			 <&tegra_car TEGRA124_CLK_CLK_M>,
+			 <&tegra_car TEGRA124_CLK_PLL_E>;
+		clock-names = "xusb_host", "xusb_host_src",
+			      "xusb_falcon_src", "xusb_ss",
+			      "xusb_ss_src", "xusb_ss_div2",
+			      "xusb_hs_src", "xusb_fs_src",
+			      "pll_u_480m", "clk_m", "pll_e";
+		resets = <&tegra_car 89>, <&tegra_car 156>,
+			 <&tegra_car 143>;
+		reset-names = "xusb_host", "xusb_ss", "xusb_src";
+
+		nvidia,xusb-padctl = <&padctl>;
+
+		status = "disabled";
+	};
+
 	padctl: padctl@7009f000 {
 		compatible = "nvidia,tegra132-xusb-padctl",
 			     "nvidia,tegra124-xusb-padctl";
@@ -657,40 +693,130 @@
 		resets = <&tegra_car 142>;
 		reset-names = "padctl";
 
-		#phy-cells = <1>;
+		pads {
+			usb2 {
+				status = "disabled";
+
+				lanes {
+					usb2-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					usb2-1 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					usb2-2 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
+			};
 
-		phys {
-			pcie-0 {
+			ulpi {
 				status = "disabled";
+
+				lanes {
+					ulpi-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
 			};
 
-			sata-0 {
+			hsic {
 				status = "disabled";
+
+				lanes {
+					hsic-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					hsic-1 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
 			};
 
-			usb3-0 {
+			pcie {
 				status = "disabled";
+
+				lanes {
+					pcie-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					pcie-1 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					pcie-2 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					pcie-3 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+
+					pcie-4 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
 			};
 
-			usb3-1 {
+			sata {
+				status = "disabled";
+
+				lanes {
+					sata-0 {
+						status = "disabled";
+						#phy-cells = <0>;
+					};
+				};
+			};
+		};
+
+		ports {
+			usb2-0 {
 				status = "disabled";
 			};
 
-			utmi-0 {
+			usb2-1 {
 				status = "disabled";
 			};
 
-			utmi-1 {
+			usb2-2 {
 				status = "disabled";
 			};
 
-			utmi-2 {
+			hsic-0 {
+				status = "disabled";
+			};
+
+			hsic-1 {
+				status = "disabled";
+			};
+
+			usb3-0 {
+				status = "disabled";
+			};
+
+			usb3-1 {
 				status = "disabled";
 			};
 		};
 	};
 
-	sdhci@700b0000 {
+	mmc@700b0000 {
 		compatible = "nvidia,tegra124-sdhci";
 		reg = <0x0 0x700b0000 0x0 0x200>;
 		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
@@ -701,7 +827,7 @@
 		status = "disabled";
 	};
 
-	sdhci@700b0200 {
+	mmc@700b0200 {
 		compatible = "nvidia,tegra124-sdhci";
 		reg = <0x0 0x700b0200 0x0 0x200>;
 		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
@@ -712,7 +838,7 @@
 		status = "disabled";
 	};
 
-	sdhci@700b0400 {
+	mmc@700b0400 {
 		compatible = "nvidia,tegra124-sdhci";
 		reg = <0x0 0x700b0400 0x0 0x200>;
 		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
@@ -723,7 +849,7 @@
 		status = "disabled";
 	};
 
-	sdhci@700b0600 {
+	mmc@700b0600 {
 		compatible = "nvidia,tegra124-sdhci";
 		reg = <0x0 0x700b0600 0x0 0x200>;
 		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
@@ -736,12 +862,12 @@
 
 	soctherm: thermal-sensor@700e2000 {
 		compatible = "nvidia,tegra132-soctherm";
-		reg = <0x0 0x700e2000 0x0 0x600 /* 0: SOC_THERM reg_base */
-			0x0 0x70040000 0x0 0x200>; /* 2: CCROC reg_base */
+		reg = <0x0 0x700e2000 0x0 0x600>, /* 0: SOC_THERM reg_base */
+		      <0x0 0x70040000 0x0 0x200>; /* 2: CCROC reg_base */
 		reg-names = "soctherm-reg", "ccroc-reg";
 		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA124_CLK_TSENSOR>,
-			<&tegra_car TEGRA124_CLK_SOC_THERM>;
+		         <&tegra_car TEGRA124_CLK_SOC_THERM>;
 		clock-names = "tsensor", "soctherm";
 		resets = <&tegra_car 78>;
 		reset-names = "soctherm";
@@ -992,6 +1118,7 @@
 		clock-names = "reg", "pll_u", "utmi-pads";
 		resets = <&tegra_car 22>, <&tegra_car 22>;
 		reset-names = "usb", "utmi-pads";
+		#phy-cells = <0>;
 		nvidia,hssync-start-delay = <0>;
 		nvidia,idle-wait-delay = <17>;
 		nvidia,elastic-limit = <16>;
@@ -1030,6 +1157,7 @@
 		clock-names = "reg", "pll_u", "utmi-pads";
 		resets = <&tegra_car 58>, <&tegra_car 22>;
 		reset-names = "usb", "utmi-pads";
+		#phy-cells = <0>;
 		nvidia,hssync-start-delay = <0>;
 		nvidia,idle-wait-delay = <17>;
 		nvidia,elastic-limit = <16>;
@@ -1067,6 +1195,7 @@
 		clock-names = "reg", "pll_u", "utmi-pads";
 		resets = <&tegra_car 59>, <&tegra_car 22>;
 		reset-names = "usb", "utmi-pads";
+		#phy-cells = <0>;
 		nvidia,hssync-start-delay = <0>;
 		nvidia,idle-wait-delay = <17>;
 		nvidia,elastic-limit = <16>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
index 1af7f9ffb7b6..802b8c52489a 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts
@@ -103,7 +103,7 @@
 	};
 
 	/* SDMMC1 (SD/MMC) */
-	sdhci@3400000 {
+	mmc@3400000 {
 		status = "okay";
 
 		vmmc-supply = <&vdd_sd>;
@@ -119,10 +119,6 @@
 
 		avdd-pll-erefeut-supply = <&vdd_1v8_pll>;
 		avdd-usb-supply = <&vdd_3v3_sys>;
-		dvdd-pex-supply = <&vdd_pex>;
-		dvdd-pex-pll-supply = <&vdd_pex>;
-		hvdd-pex-supply = <&vdd_1v8>;
-		hvdd-pex-pll-supply = <&vdd_1v8>;
 		vclamp-usb-supply = <&vdd_1v8>;
 		vddio-hsic-supply = <&gnd>;
 
@@ -175,19 +171,18 @@
 				status = "okay";
 				mode = "otg";
 				vbus-supply = <&vdd_usb0>;
-
 				usb-role-switch;
+
 				connector {
-					compatible = "usb-b-connector",
-						     "gpio-usb-b-connector";
+					compatible = "gpio-usb-b-connector",
+						     "usb-b-connector";
 					label = "micro-USB";
 					type = "micro";
-					vbus-gpio = <&gpio
-						     TEGRA186_MAIN_GPIO(X, 7)
-						     GPIO_ACTIVE_LOW>;
-					id-gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+					vbus-gpios = <&gpio
+						      TEGRA186_MAIN_GPIO(X, 7)
+						      GPIO_ACTIVE_LOW>;
+					id-gpios = <&pmic 0 GPIO_ACTIVE_HIGH>;
 				};
-
 			};
 
 			usb2-1 {
@@ -199,6 +194,7 @@
 
 			usb3-0 {
 				nvidia,usb2-companion = <1>;
+				vbus-supply = <&vdd_usb1>;
 				status = "okay";
 			};
 		};
@@ -227,8 +223,8 @@
 			reg = <0x57>;
 
 			vcc-supply = <&vdd_1v8>;
-			address-bits = <8>;
-			page-size = <8>;
+			address-width = <8>;
+			pagesize = <8>;
 			size = <256>;
 			read-only;
 		};
@@ -286,8 +282,8 @@
 		sor@15580000 {
 			status = "okay";
 
-			avdd-io-supply = <&vdd_hdmi_1v05>;
-			vdd-pll-supply = <&vdd_1v8_ap>;
+			avdd-io-hdmi-dp-supply = <&vdd_hdmi_1v05>;
+			vdd-hdmi-dp-pll-supply = <&vdd_1v8_ap>;
 			hdmi-supply = <&vdd_hdmi>;
 
 			nvidia,ddc-i2c-bus = <&ddc>;
@@ -333,62 +329,51 @@
 		};
 	};
 
-	regulators {
-		vdd_sd: regulator@100 {
-			compatible = "regulator-fixed";
-			reg = <100>;
-
-			regulator-name = "SD_CARD_SW_PWR";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
+	vdd_sd: regulator@100 {
+		compatible = "regulator-fixed";
+		regulator-name = "SD_CARD_SW_PWR";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
 
-			gpio = <&gpio TEGRA186_MAIN_GPIO(P, 6)
-				      GPIO_ACTIVE_HIGH>;
-			enable-active-high;
+		gpio = <&gpio TEGRA186_MAIN_GPIO(P, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 
-			vin-supply = <&vdd_3v3_sys>;
-		};
-
-		vdd_hdmi: regulator@101 {
-			compatible = "regulator-fixed";
-			reg = <101>;
-
-			regulator-name = "VDD_HDMI_5V0";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-
-			gpio = <&exp1 14 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
 
-			vin-supply = <&vdd_5v0_sys>;
-		};
+	vdd_hdmi: regulator@101 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_HDMI_5V0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
 
-		vdd_usb0: regulator@102 {
-			compatible = "regulator-fixed";
-			reg = <102>;
+		gpio = <&exp1 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 
-			regulator-name = "VDD_USB0";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
+		vin-supply = <&vdd_5v0_sys>;
+	};
 
-			gpio = <&gpio TEGRA186_MAIN_GPIO(L, 4) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
+	vdd_usb0: regulator@102 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_USB0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
 
-			vin-supply = <&vdd_5v0_sys>;
-		};
+		gpio = <&gpio TEGRA186_MAIN_GPIO(L, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 
-		vdd_usb1: regulator@103 {
-			compatible = "regulator-fixed";
-			reg = <103>;
+		vin-supply = <&vdd_5v0_sys>;
+	};
 
-			regulator-name = "VDD_USB1";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
+	vdd_usb1: regulator@103 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_USB1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
 
-			gpio = <&gpio TEGRA186_MAIN_GPIO(L, 5) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
+		gpio = <&gpio TEGRA186_MAIN_GPIO(L, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 
-			vin-supply = <&vdd_5v0_sys>;
-		};
+		vin-supply = <&vdd_5v0_sys>;
 	};
 };
diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
index 2fcaa2e64370..53d92fdd7f06 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi
@@ -9,9 +9,6 @@
 
 	aliases {
 		ethernet0 = "/ethernet@2490000";
-		sdhci0 = "/sdhci@3460000";
-		sdhci1 = "/sdhci@3400000";
-		serial0 = &uarta;
 		i2c0 = "/bpmp/i2c";
 		i2c1 = "/i2c@3160000";
 		i2c2 = "/i2c@c240000";
@@ -20,6 +17,9 @@
 		i2c5 = "/i2c@31c0000";
 		i2c6 = "/i2c@c250000";
 		i2c7 = "/i2c@31e0000";
+		mmc0 = "/mmc@3460000";
+		mmc1 = "/mmc@3400000";
+		serial0 = &uarta;
 	};
 
 	chosen {
@@ -27,7 +27,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x2 0x00000000>;
 	};
@@ -50,6 +50,8 @@
 				interrupt-parent = <&gpio>;
 				interrupts = <TEGRA186_MAIN_GPIO(M, 5)
 					      IRQ_TYPE_LEVEL_LOW>;
+
+				#phy-cells = <0>;
 			};
 		};
 	};
@@ -133,7 +135,7 @@
 	};
 
 	/* SDMMC1 (SD/MMC) */
-	sdhci@3400000 {
+	mmc@3400000 {
 		cd-gpios = <&gpio TEGRA186_MAIN_GPIO(P, 5) GPIO_ACTIVE_LOW>;
 		wp-gpios = <&gpio TEGRA186_MAIN_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
 
@@ -141,12 +143,12 @@
 	};
 
 	/* SDMMC3 (SDIO) */
-	sdhci@3440000 {
+	mmc@3440000 {
 		status = "okay";
 	};
 
 	/* SDMMC4 (eMMC) */
-	sdhci@3460000 {
+	mmc@3460000 {
 		status = "okay";
 		bus-width = <8>;
 		non-removable;
@@ -172,8 +174,8 @@
 			reg = <0x50>;
 
 			vcc-supply = <&vdd_1v8>;
-			address-bits = <8>;
-			page-size = <8>;
+			address-width = <8>;
+			pagesize = <8>;
 			size = <256>;
 			read-only;
 		};
@@ -390,45 +392,33 @@
 		method = "smc";
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		gnd: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-
-			regulator-name = "GND";
-			regulator-min-microvolt = <0>;
-			regulator-max-microvolt = <0>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		vdd_5v0_sys: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-
-			regulator-name = "VDD_5V0_SYS";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
+	gnd: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "GND";
+		regulator-min-microvolt = <0>;
+		regulator-max-microvolt = <0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
 
-		vdd_1v8_ap: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
+	vdd_5v0_sys: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_5V0_SYS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
 
-			regulator-name = "VDD_1V8_AP";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
+	vdd_1v8_ap: regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V8_AP";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
 
-			gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
+		gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 
-			vin-supply = <&vdd_1v8>;
-		};
+		vin-supply = <&vdd_1v8>;
 	};
 };
diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
index 58100fb9cd8b..34d249d85da7 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -60,6 +60,9 @@
 		clock-names = "master_bus", "slave_bus", "rx", "tx", "ptp_ref";
 		resets = <&bpmp TEGRA186_RESET_EQOS>;
 		reset-names = "eqos";
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_EQOSR &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_EQOSW &emc>;
+		interconnect-names = "dma-mem", "write";
 		iommus = <&smmu TEGRA186_SID_EQOS>;
 		status = "disabled";
 
@@ -139,12 +142,13 @@
 		};
 	};
 
-	memory-controller@2c00000 {
+	mc: memory-controller@2c00000 {
 		compatible = "nvidia,tegra186-mc";
 		reg = <0x0 0x02c00000 0x0 0xb0000>;
 		interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
 		status = "disabled";
 
+		#interconnect-cells = <1>;
 		#address-cells = <2>;
 		#size-cells = <2>;
 
@@ -163,6 +167,8 @@
 			clocks = <&bpmp TEGRA186_CLK_EMC>;
 			clock-names = "emc";
 
+			#interconnect-cells = <0>;
+
 			nvidia,bpmp = <&bpmp>;
 		};
 	};
@@ -327,7 +333,7 @@
 		status = "disabled";
 	};
 
-	sdmmc1: sdhci@3400000 {
+	sdmmc1: mmc@3400000 {
 		compatible = "nvidia,tegra186-sdhci";
 		reg = <0x0 0x03400000 0x0 0x10000>;
 		interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
@@ -335,6 +341,9 @@
 		clock-names = "sdhci";
 		resets = <&bpmp TEGRA186_RESET_SDMMC1>;
 		reset-names = "sdhci";
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_SDMMCRA &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_SDMMCWA &emc>;
+		interconnect-names = "dma-mem", "write";
 		iommus = <&smmu TEGRA186_SID_SDMMC1>;
 		pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
 		pinctrl-0 = <&sdmmc1_3v3>;
@@ -353,7 +362,7 @@
 		status = "disabled";
 	};
 
-	sdmmc2: sdhci@3420000 {
+	sdmmc2: mmc@3420000 {
 		compatible = "nvidia,tegra186-sdhci";
 		reg = <0x0 0x03420000 0x0 0x10000>;
 		interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
@@ -361,6 +370,9 @@
 		clock-names = "sdhci";
 		resets = <&bpmp TEGRA186_RESET_SDMMC2>;
 		reset-names = "sdhci";
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_SDMMCRAA &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_SDMMCWAA &emc>;
+		interconnect-names = "dma-mem", "write";
 		iommus = <&smmu TEGRA186_SID_SDMMC2>;
 		pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
 		pinctrl-0 = <&sdmmc2_3v3>;
@@ -374,7 +386,7 @@
 		status = "disabled";
 	};
 
-	sdmmc3: sdhci@3440000 {
+	sdmmc3: mmc@3440000 {
 		compatible = "nvidia,tegra186-sdhci";
 		reg = <0x0 0x03440000 0x0 0x10000>;
 		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
@@ -382,6 +394,9 @@
 		clock-names = "sdhci";
 		resets = <&bpmp TEGRA186_RESET_SDMMC3>;
 		reset-names = "sdhci";
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_SDMMCR &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_SDMMCW &emc>;
+		interconnect-names = "dma-mem", "write";
 		iommus = <&smmu TEGRA186_SID_SDMMC3>;
 		pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
 		pinctrl-0 = <&sdmmc3_3v3>;
@@ -397,7 +412,7 @@
 		status = "disabled";
 	};
 
-	sdmmc4: sdhci@3460000 {
+	sdmmc4: mmc@3460000 {
 		compatible = "nvidia,tegra186-sdhci";
 		reg = <0x0 0x03460000 0x0 0x10000>;
 		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
@@ -408,6 +423,9 @@
 		assigned-clock-parents = <&bpmp TEGRA186_CLK_PLLC4_VCO>;
 		resets = <&bpmp TEGRA186_RESET_SDMMC4>;
 		reset-names = "sdhci";
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_SDMMCRAB &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_SDMMCWAB &emc>;
+		interconnect-names = "dma-mem", "write";
 		iommus = <&smmu TEGRA186_SID_SDMMC4>;
 		nvidia,pad-autocal-pull-up-offset-hs400 = <0x05>;
 		nvidia,pad-autocal-pull-down-offset-hs400 = <0x05>;
@@ -436,6 +454,9 @@
 			 <&bpmp TEGRA186_RESET_HDA2CODEC_2X>;
 		reset-names = "hda", "hda2hdmi", "hda2codec_2x";
 		power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_HDAR &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_HDAW &emc>;
+		interconnect-names = "dma-mem", "write";
 		iommus = <&smmu TEGRA186_SID_HDA>;
 		status = "disabled";
 	};
@@ -547,8 +568,7 @@
 		      <0x0 0x03538000 0x0 0x1000>;
 		reg-names = "hcd", "fpci";
 		interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+			     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&bpmp TEGRA186_CLK_XUSB_HOST>,
 			 <&bpmp TEGRA186_CLK_XUSB_FALCON>,
 			 <&bpmp TEGRA186_CLK_XUSB_SS>,
@@ -564,6 +584,9 @@
 		power-domains = <&bpmp TEGRA186_POWER_DOMAIN_XUSBC>,
 				<&bpmp TEGRA186_POWER_DOMAIN_XUSBA>;
 		power-domain-names = "xusb_host", "xusb_ss";
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_XUSB_HOSTR &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_XUSB_HOSTW &emc>;
+		interconnect-names = "dma-mem", "write";
 		iommus = <&smmu TEGRA186_SID_XUSB_HOST>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -752,9 +775,9 @@
 		compatible = "nvidia,tegra186-pcie";
 		power-domains = <&bpmp TEGRA186_POWER_DOMAIN_PCX>;
 		device_type = "pci";
-		reg = <0x0 0x10003000 0x0 0x00000800   /* PADS registers */
-		       0x0 0x10003800 0x0 0x00000800   /* AFI registers */
-		       0x0 0x40000000 0x0 0x10000000>; /* configuration space */
+		reg = <0x0 0x10003000 0x0 0x00000800>, /* PADS registers */
+		      <0x0 0x10003800 0x0 0x00000800>, /* AFI registers */
+		      <0x0 0x40000000 0x0 0x10000000>; /* configuration space */
 		reg-names = "pads", "afi", "cs";
 
 		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
@@ -769,22 +792,26 @@
 		#address-cells = <3>;
 		#size-cells = <2>;
 
-		ranges = <0x82000000 0 0x10000000 0x0 0x10000000 0 0x00001000   /* port 0 configuration space */
-			  0x82000000 0 0x10001000 0x0 0x10001000 0 0x00001000   /* port 1 configuration space */
-			  0x82000000 0 0x10004000 0x0 0x10004000 0 0x00001000   /* port 2 configuration space */
-			  0x81000000 0 0x0        0x0 0x50000000 0 0x00010000   /* downstream I/O (64 KiB) */
-			  0x82000000 0 0x50100000 0x0 0x50100000 0 0x07F00000   /* non-prefetchable memory (127 MiB) */
-			  0xc2000000 0 0x58000000 0x0 0x58000000 0 0x28000000>; /* prefetchable memory (640 MiB) */
+		ranges = <0x02000000 0 0x10000000 0x0 0x10000000 0 0x00001000>, /* port 0 configuration space */
+			 <0x02000000 0 0x10001000 0x0 0x10001000 0 0x00001000>,/* port 1 configuration space */
+			 <0x02000000 0 0x10004000 0x0 0x10004000 0 0x00001000>, /* port 2 configuration space */
+			 <0x01000000 0 0x0        0x0 0x50000000 0 0x00010000>, /* downstream I/O (64 KiB) */
+			 <0x02000000 0 0x50100000 0x0 0x50100000 0 0x07f00000>, /* non-prefetchable memory (127 MiB) */
+			 <0x42000000 0 0x58000000 0x0 0x58000000 0 0x28000000>; /* prefetchable memory (640 MiB) */
 
-		clocks = <&bpmp TEGRA186_CLK_AFI>,
-			 <&bpmp TEGRA186_CLK_PCIE>,
+		clocks = <&bpmp TEGRA186_CLK_PCIE>,
+			 <&bpmp TEGRA186_CLK_AFI>,
 			 <&bpmp TEGRA186_CLK_PLLE>;
-		clock-names = "afi", "pex", "pll_e";
+		clock-names = "pex", "afi", "pll_e";
 
-		resets = <&bpmp TEGRA186_RESET_AFI>,
-			 <&bpmp TEGRA186_RESET_PCIE>,
+		resets = <&bpmp TEGRA186_RESET_PCIE>,
+			 <&bpmp TEGRA186_RESET_AFI>,
 			 <&bpmp TEGRA186_RESET_PCIEXCLK>;
-		reset-names = "afi", "pex", "pcie_x";
+		reset-names = "pex", "afi", "pcie_x";
+
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_AFIR &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_AFIW &emc>;
+		interconnect-names = "dma-mem", "write";
 
 		iommus = <&smmu TEGRA186_SID_AFI>;
 		iommu-map = <0x0 &smmu TEGRA186_SID_AFI 0x1000>;
@@ -906,12 +933,13 @@
 	};
 
 	host1x@13e00000 {
-		compatible = "nvidia,tegra186-host1x", "simple-bus";
+		compatible = "nvidia,tegra186-host1x";
 		reg = <0x0 0x13e00000 0x0 0x10000>,
 		      <0x0 0x13e10000 0x0 0x10000>;
 		reg-names = "hypervisor", "vm";
 		interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
 		             <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "syncpt", "host1x";
 		clocks = <&bpmp TEGRA186_CLK_HOST1X>;
 		clock-names = "host1x";
 		resets = <&bpmp TEGRA186_RESET_HOST1X>;
@@ -921,6 +949,10 @@
 		#size-cells = <1>;
 
 		ranges = <0x15000000 0x0 0x15000000 0x01000000>;
+
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_HOST1XDMAR &emc>;
+		interconnect-names = "dma-mem";
+
 		iommus = <&smmu TEGRA186_SID_HOST1X>;
 
 		dpaux1: dpaux@15040000 {
@@ -958,7 +990,7 @@
 		};
 
 		display-hub@15200000 {
-			compatible = "nvidia,tegra186-display", "simple-bus";
+			compatible = "nvidia,tegra186-display";
 			reg = <0x15200000 0x00040000>;
 			resets = <&bpmp TEGRA186_RESET_NVDISPLAY0_MISC>,
 				 <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP0>,
@@ -992,6 +1024,9 @@
 				reset-names = "dc";
 
 				power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>;
+				interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR &emc>,
+						<&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+				interconnect-names = "dma-mem", "read-1";
 				iommus = <&smmu TEGRA186_SID_NVDISPLAY>;
 
 				nvidia,outputs = <&dsia &dsib &sor0 &sor1>;
@@ -1008,6 +1043,9 @@
 				reset-names = "dc";
 
 				power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISPB>;
+				interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR &emc>,
+						<&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+				interconnect-names = "dma-mem", "read-1";
 				iommus = <&smmu TEGRA186_SID_NVDISPLAY>;
 
 				nvidia,outputs = <&dsia &dsib &sor0 &sor1>;
@@ -1024,6 +1062,9 @@
 				reset-names = "dc";
 
 				power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISPC>;
+				interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR &emc>,
+						<&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+				interconnect-names = "dma-mem", "read-1";
 				iommus = <&smmu TEGRA186_SID_NVDISPLAY>;
 
 				nvidia,outputs = <&sor0 &sor1>;
@@ -1056,6 +1097,9 @@
 			reset-names = "vic";
 
 			power-domains = <&bpmp TEGRA186_POWER_DOMAIN_VIC>;
+			interconnects = <&mc TEGRA186_MEMORY_CLIENT_VICSRD &emc>,
+					<&mc TEGRA186_MEMORY_CLIENT_VICSWR &emc>;
+			interconnect-names = "dma-mem", "write";
 			iommus = <&smmu TEGRA186_SID_VIC>;
 		};
 
@@ -1199,8 +1243,8 @@
 		compatible = "nvidia,gp10b";
 		reg = <0x0 0x17000000 0x0 0x1000000>,
 		      <0x0 0x18000000 0x0 0x1000000>;
-		interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
-			      GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "stall", "nonstall";
 
 		clocks = <&bpmp TEGRA186_CLK_GPCCLK>,
@@ -1211,25 +1255,28 @@
 		status = "disabled";
 
 		power-domains = <&bpmp TEGRA186_POWER_DOMAIN_GPU>;
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_GPUSRD &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_GPUSWR &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_GPUSRD2 &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_GPUSWR2 &emc>;
+		interconnect-names = "dma-mem", "write-0", "read-1", "write-1";
 	};
 
-	sysram@30000000 {
+	sram@30000000 {
 		compatible = "nvidia,tegra186-sysram", "mmio-sram";
 		reg = <0x0 0x30000000 0x0 0x50000>;
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges = <0 0x0 0x0 0x30000000 0x0 0x50000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x30000000 0x50000>;
 
-		cpu_bpmp_tx: shmem@4e000 {
-			compatible = "nvidia,tegra186-bpmp-shmem";
-			reg = <0x0 0x4e000 0x0 0x1000>;
+		cpu_bpmp_tx: sram@4e000 {
+			reg = <0x4e000 0x1000>;
 			label = "cpu-bpmp-tx";
 			pool;
 		};
 
-		cpu_bpmp_rx: shmem@4f000 {
-			compatible = "nvidia,tegra186-bpmp-shmem";
-			reg = <0x0 0x4f000 0x0 0x1000>;
+		cpu_bpmp_rx: sram@4f000 {
+			reg = <0x4f000 0x1000>;
 			label = "cpu-bpmp-rx";
 			pool;
 		};
@@ -1237,6 +1284,11 @@
 
 	bpmp: bpmp {
 		compatible = "nvidia,tegra186-bpmp";
+		interconnects = <&mc TEGRA186_MEMORY_CLIENT_BPMPR &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_BPMPW &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_BPMPDMAR &emc>,
+				<&mc TEGRA186_MEMORY_CLIENT_BPMPDMAW &emc>;
+		interconnect-names = "read", "write", "dma-mem", "dma-write";
 		iommus = <&smmu TEGRA186_SID_BPMP>;
 		mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB
 				    TEGRA_HSP_DB_MASTER_BPMP>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
index b96eb4e14556..4c005b811233 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
@@ -8,18 +8,18 @@
 	compatible = "nvidia,p2888", "nvidia,tegra194";
 
 	aliases {
-		ethernet0 = "/cbb@0/ethernet@2490000";
-		sdhci0 = "/cbb@0/sdhci@3460000";
-		sdhci1 = "/cbb@0/sdhci@3400000";
-		serial0 = &tcu;
+		ethernet0 = "/bus@0/ethernet@2490000";
 		i2c0 = "/bpmp/i2c";
-		i2c1 = "/cbb@0/i2c@3160000";
-		i2c2 = "/cbb@0/i2c@c240000";
-		i2c3 = "/cbb@0/i2c@3180000";
-		i2c4 = "/cbb@0/i2c@3190000";
-		i2c5 = "/cbb@0/i2c@31c0000";
-		i2c6 = "/cbb@0/i2c@c250000";
-		i2c7 = "/cbb@0/i2c@31e0000";
+		i2c1 = "/bus@0/i2c@3160000";
+		i2c2 = "/bus@0/i2c@c240000";
+		i2c3 = "/bus@0/i2c@3180000";
+		i2c4 = "/bus@0/i2c@3190000";
+		i2c5 = "/bus@0/i2c@31c0000";
+		i2c6 = "/bus@0/i2c@c250000";
+		i2c7 = "/bus@0/i2c@31e0000";
+		mmc0 = "/bus@0/mmc@3460000";
+		mmc1 = "/bus@0/mmc@3400000";
+		serial0 = &tcu;
 	};
 
 	chosen {
@@ -27,7 +27,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	cbb@0 {
+	bus@0 {
 		ethernet@2490000 {
 			status = "okay";
 
@@ -44,6 +44,7 @@
 					reg = <0x0>;
 					interrupt-parent = <&gpio>;
 					interrupts = <TEGRA194_MAIN_GPIO(G, 4) IRQ_TYPE_LEVEL_LOW>;
+					#phy-cells = <0>;
 				};
 			};
 		};
@@ -57,12 +58,12 @@
 		};
 
 		/* SDMMC1 (SD/MMC) */
-		sdhci@3400000 {
+		mmc@3400000 {
 			cd-gpios = <&gpio TEGRA194_MAIN_GPIO(A, 0) GPIO_ACTIVE_LOW>;
 		};
 
 		/* SDMMC4 (eMMC) */
-		sdhci@3460000 {
+		mmc@3460000 {
 			status = "okay";
 			bus-width = <8>;
 			non-removable;
@@ -292,65 +293,49 @@
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vdd_5v0_sys: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-
-			regulator-name = "VIN_SYS_5V0";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		vdd_hdmi: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-
-			regulator-name = "VDD_5V0_HDMI_CON";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio TEGRA194_MAIN_GPIO(A, 3) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
-
-		vdd_3v3_pcie: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-
-			regulator-name = "PEX_3V3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio TEGRA194_MAIN_GPIO(Z, 2) GPIO_ACTIVE_HIGH>;
-			regulator-boot-on;
-			enable-active-high;
-		};
+	vdd_5v0_sys: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VIN_SYS_5V0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
 
-		vdd_12v_pcie: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
+	vdd_hdmi: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_5V0_HDMI_CON";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA194_MAIN_GPIO(A, 3) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-			regulator-name = "VDD_12V";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			gpio = <&gpio TEGRA194_MAIN_GPIO(A, 1) GPIO_ACTIVE_HIGH>;
-			regulator-boot-on;
-		};
+	vdd_3v3_pcie: regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "PEX_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio TEGRA194_MAIN_GPIO(Z, 2) GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+		enable-active-high;
+	};
 
-		vdd_5v_sata: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
+	vdd_12v_pcie: regulator@3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_12V";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		gpio = <&gpio TEGRA194_MAIN_GPIO(A, 1) GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+	};
 
-			regulator-name = "VDD_5V_SATA";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio TEGRA194_MAIN_GPIO(Z, 1) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	vdd_5v_sata: regulator@4 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_5V_SATA";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA194_MAIN_GPIO(Z, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 	};
 };
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
index e15d1eac05f5..90b6ea5467fa 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
@@ -10,7 +10,7 @@
 	model = "NVIDIA Jetson AGX Xavier Developer Kit";
 	compatible = "nvidia,p2972-0000", "nvidia,tegra194";
 
-	cbb@0 {
+	bus@0 {
 		aconnect@2900000 {
 			status = "okay";
 
@@ -28,7 +28,7 @@
 		};
 
 		/* SDMMC1 (SD/MMC) */
-		sdhci@3400000 {
+		mmc@3400000 {
 			status = "okay";
 		};
 
@@ -93,10 +93,10 @@
 		usb@3610000 {
 			status = "okay";
 
-			phys =	<&{/cbb@0/padctl@3520000/pads/usb2/lanes/usb2-1}>,
-				<&{/cbb@0/padctl@3520000/pads/usb2/lanes/usb2-3}>,
-				<&{/cbb@0/padctl@3520000/pads/usb3/lanes/usb3-0}>,
-				<&{/cbb@0/padctl@3520000/pads/usb3/lanes/usb3-3}>;
+			phys =	<&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-1}>,
+				<&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-3}>,
+				<&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-0}>,
+				<&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-3}>;
 			phy-names = "usb2-1", "usb2-3", "usb3-0", "usb3-3";
 		};
 
@@ -145,8 +145,8 @@
 			sor@15b80000 {
 				status = "okay";
 
-				avdd-io-supply = <&vdd_1v0>;
-				vdd-pll-supply = <&vdd_1v8hs>;
+				avdd-io-hdmi-dp-supply = <&vdd_1v0>;
+				vdd-hdmi-dp-pll-supply = <&vdd_1v8hs>;
 				hdmi-supply = <&vdd_hdmi>;
 
 				nvidia,ddc-i2c-bus = <&ddc>;
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0000.dts
new file mode 100644
index 000000000000..c1c589805d6b
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0000.dts
@@ -0,0 +1,331 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/input/gpio-keys.h>
+
+#include "tegra194-p3668-0000.dtsi"
+
+/ {
+	model = "NVIDIA Jetson Xavier NX Developer Kit";
+	compatible = "nvidia,p3509-0000+p3668-0000", "nvidia,tegra194";
+
+	bus@0 {
+		aconnect@2900000 {
+			status = "okay";
+
+			dma-controller@2930000 {
+				status = "okay";
+			};
+
+			interrupt-controller@2a40000 {
+				status = "okay";
+			};
+		};
+
+		ddc: i2c@3190000 {
+			status = "okay";
+		};
+
+		hda@3510000 {
+			nvidia,model = "jetson-xavier-nx-hda";
+			status = "okay";
+		};
+
+		padctl@3520000 {
+			status = "okay";
+
+			pads {
+				usb2 {
+					lanes {
+						usb2-1 {
+							status = "okay";
+						};
+
+						usb2-2 {
+							status = "okay";
+						};
+					};
+				};
+
+				usb3 {
+					lanes {
+						usb3-2 {
+							status = "okay";
+						};
+					};
+				};
+			};
+
+			ports {
+				usb2-1 {
+					mode = "host";
+					status = "okay";
+				};
+
+				usb2-2 {
+					mode = "host";
+					vbus-supply = <&vdd_5v0_sys>;
+					status = "okay";
+				};
+
+				usb3-2 {
+					nvidia,usb2-companion = <1>;
+					vbus-supply = <&vdd_5v0_sys>;
+					status = "okay";
+				};
+			};
+		};
+
+		usb@3610000 {
+			status = "okay";
+
+			phys =	<&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-1}>,
+				<&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-2}>,
+				<&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-2}>;
+			phy-names = "usb2-1", "usb2-2", "usb3-2";
+		};
+
+		pwm@32d0000 {
+			status = "okay";
+		};
+
+		host1x@13e00000 {
+			display-hub@15200000 {
+				status = "okay";
+			};
+
+			dpaux@155c0000 {
+				status = "okay";
+			};
+
+			dpaux@155d0000 {
+				status = "okay";
+			};
+
+			/* DP0 */
+			sor@15b00000 {
+				status = "okay";
+
+				avdd-io-hdmi-dp-supply = <&vdd_1v0>;
+				vdd-hdmi-dp-pll-supply = <&vdd_1v8hs>;
+
+				nvidia,dpaux = <&dpaux0>;
+			};
+
+			/* HDMI */
+			sor@15b40000 {
+				status = "okay";
+
+				avdd-io-hdmi-dp-supply = <&vdd_1v0>;
+				vdd-hdmi-dp-pll-supply = <&vdd_1v8hs>;
+				hdmi-supply = <&vdd_hdmi>;
+
+				nvidia,ddc-i2c-bus = <&ddc>;
+				nvidia,hpd-gpio = <&gpio TEGRA194_MAIN_GPIO(M, 1)
+							 GPIO_ACTIVE_LOW>;
+			};
+		};
+	};
+
+	pcie@14160000 {
+		status = "okay";
+
+		vddio-pex-ctl-supply = <&vdd_1v8ao>;
+
+		phys = <&p2u_hsio_11>;
+		phy-names = "p2u-0";
+	};
+
+	pcie@141a0000 {
+		status = "okay";
+
+		vddio-pex-ctl-supply = <&vdd_1v8ao>;
+
+		phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
+		       <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
+		       <&p2u_nvhs_6>, <&p2u_nvhs_7>;
+
+		phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
+			    "p2u-5", "p2u-6", "p2u-7";
+	};
+
+	pcie_ep@141a0000 {
+		status = "disabled";
+
+		vddio-pex-ctl-supply = <&vdd_1v8ao>;
+
+		reset-gpios = <&gpio TEGRA194_MAIN_GPIO(GG, 1) GPIO_ACTIVE_LOW>;
+
+		nvidia,refclk-select-gpios = <&gpio_aon TEGRA194_AON_GPIO(AA, 5)
+					      GPIO_ACTIVE_HIGH>;
+
+		phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>,
+		       <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>,
+		       <&p2u_nvhs_6>, <&p2u_nvhs_7>;
+
+		phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4",
+			    "p2u-5", "p2u-6", "p2u-7";
+	};
+
+	fan: fan {
+		compatible = "pwm-fan";
+		pwms = <&pwm6 0 45334>;
+
+		cooling-levels = <0 64 128 255>;
+		#cooling-cells = <2>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		force-recovery {
+			label = "Force Recovery";
+			gpios = <&gpio TEGRA194_MAIN_GPIO(G, 0)
+				       GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_SLEEP>;
+			debounce-interval = <10>;
+		};
+
+		power {
+			label = "Power";
+			gpios = <&gpio_aon TEGRA194_AON_GPIO(EE, 4)
+					   GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	vdd_5v0_sys: regulator@100 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_5V_SYS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_3v3_sys: regulator@101 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3_SYS";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_3v3_ao: regulator@102 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3_AO";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_1v8: regulator@103 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_hdmi: regulator@104 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_5V0_HDMI_CON";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	thermal-zones {
+		cpu {
+			polling-delay = <0>;
+			polling-delay-passive = <500>;
+			status = "okay";
+
+			trips {
+				cpu_trip_critical: critical {
+					temperature = <96500>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+
+				cpu_trip_hot: hot {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+
+				cpu_trip_active: active {
+					temperature = <50000>;
+					hysteresis = <2000>;
+					type = "active";
+				};
+
+				cpu_trip_passive: passive {
+					temperature = <30000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				cpu-critical {
+					cooling-device = <&fan 3 3>;
+					trip = <&cpu_trip_critical>;
+				};
+
+				cpu-hot {
+					cooling-device = <&fan 2 2>;
+					trip = <&cpu_trip_hot>;
+				};
+
+				cpu-active {
+					cooling-device = <&fan 1 1>;
+					trip = <&cpu_trip_active>;
+				};
+
+				cpu-passive {
+					cooling-device = <&fan 0 0>;
+					trip = <&cpu_trip_passive>;
+				};
+			};
+		};
+
+		gpu {
+			polling-delay = <0>;
+			polling-delay-passive = <500>;
+			status = "okay";
+
+			trips {
+				gpu_alert0: critical {
+					temperature = <99000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		aux {
+			polling-delay = <0>;
+			polling-delay-passive = <500>;
+			status = "okay";
+
+			trips {
+				aux_alert0: critical {
+					temperature = <90000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi
new file mode 100644
index 000000000000..10cb836aea7e
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p3668-0000.dtsi
@@ -0,0 +1,290 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "tegra194.dtsi"
+
+#include <dt-bindings/mfd/max77620.h>
+
+/ {
+	model = "NVIDIA Jetson Xavier NX";
+	compatible = "nvidia,p3668-0000", "nvidia,tegra194";
+
+	aliases {
+		ethernet0 = "/bus@0/ethernet@2490000";
+		i2c0 = "/bpmp/i2c";
+		i2c1 = "/bus@0/i2c@3160000";
+		i2c2 = "/bus@0/i2c@c240000";
+		i2c3 = "/bus@0/i2c@3180000";
+		i2c4 = "/bus@0/i2c@3190000";
+		i2c5 = "/bus@0/i2c@31c0000";
+		i2c6 = "/bus@0/i2c@c250000";
+		i2c7 = "/bus@0/i2c@31e0000";
+		mmc0 = "/bus@0/mmc@3460000";
+		rtc0 = "/bpmp/i2c/pmic@3c";
+		rtc1 = "/bus@0/rtc@c2a0000";
+		serial0 = &tcu;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = "serial0:115200n8";
+	};
+
+	bus@0 {
+		ethernet@2490000 {
+			status = "okay";
+
+			phy-reset-gpios = <&gpio TEGRA194_MAIN_GPIO(R, 1) GPIO_ACTIVE_LOW>;
+			phy-handle = <&phy>;
+			phy-mode = "rgmii-id";
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy: phy@0 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <0x0>;
+					interrupt-parent = <&gpio>;
+					interrupts = <TEGRA194_MAIN_GPIO(G, 4) IRQ_TYPE_LEVEL_LOW>;
+					#phy-cells = <0>;
+				};
+			};
+		};
+
+		memory-controller@2c00000 {
+			status = "okay";
+		};
+
+		serial@c280000 {
+			status = "okay";
+		};
+
+		/* SDMMC1 (SD/MMC) */
+		mmc@3400000 {
+			status = "okay";
+			bus-width = <4>;
+			cd-gpios = <&gpio TEGRA194_MAIN_GPIO(G, 7) GPIO_ACTIVE_LOW>;
+			disable-wp;
+			vmmc-supply = <&vdd_3v3_sd>;
+		};
+
+		padctl@3520000 {
+			avdd-usb-supply = <&vdd_usb_3v3>;
+			vclamp-usb-supply = <&vdd_1v8ao>;
+
+			ports {
+				usb2-1 {
+					vbus-supply = <&vdd_5v0_sys>;
+				};
+
+				usb2-3 {
+					vbus-supply = <&vdd_5v0_sys>;
+				};
+
+				usb3-0 {
+					vbus-supply = <&vdd_5v0_sys>;
+				};
+
+				usb3-3 {
+					vbus-supply = <&vdd_5v0_sys>;
+				};
+			};
+		};
+
+		rtc@c2a0000 {
+			status = "okay";
+		};
+
+		pmc@c360000 {
+			nvidia,invert-interrupt;
+		};
+	};
+
+	bpmp {
+		i2c {
+			status = "okay";
+
+			pmic: pmic@3c {
+				compatible = "maxim,max20024";
+				reg = <0x3c>;
+
+				interrupt-parent = <&pmc>;
+				interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+
+				#gpio-cells = <2>;
+				gpio-controller;
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&max20024_default>;
+
+				max20024_default: pinmux {
+					gpio0 {
+						pins = "gpio0";
+						function = "gpio";
+					};
+
+					gpio1 {
+						pins = "gpio1";
+						function = "fps-out";
+						maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
+					};
+
+					gpio2 {
+						pins = "gpio2";
+						function = "fps-out";
+						maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
+					};
+
+					gpio3 {
+						pins = "gpio3";
+						function = "fps-out";
+						maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
+					};
+
+					gpio4 {
+						pins = "gpio4";
+						function = "32k-out1";
+						drive-push-pull = <1>;
+					};
+
+					gpio6 {
+						pins = "gpio6";
+						function = "gpio";
+						drive-push-pull = <1>;
+					};
+
+					gpio7 {
+						pins = "gpio7";
+						function = "gpio";
+						drive-push-pull = <0>;
+					};
+				};
+
+				fps {
+					fps0 {
+						maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+						maxim,shutdown-fps-time-period-us = <640>;
+					};
+
+					fps1 {
+						maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
+						maxim,shutdown-fps-time-period-us = <640>;
+						maxim,device-state-on-disabled-event = <MAX77620_FPS_INACTIVE_STATE_SLEEP>;
+					};
+
+					fps2 {
+						maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+						maxim,shutdown-fps-time-period-us = <640>;
+					};
+				};
+
+				regulators {
+					in-sd0-supply = <&vdd_5v0_sys>;
+					in-sd1-supply = <&vdd_5v0_sys>;
+					in-sd2-supply = <&vdd_5v0_sys>;
+					in-sd3-supply = <&vdd_5v0_sys>;
+					in-sd4-supply = <&vdd_5v0_sys>;
+
+					in-ldo0-1-supply = <&vdd_5v0_sys>;
+					in-ldo2-supply = <&vdd_5v0_sys>;
+					in-ldo3-5-supply = <&vdd_5v0_sys>;
+					in-ldo4-6-supply = <&vdd_5v0_sys>;
+					in-ldo7-8-supply = <&vdd_1v8ls>;
+
+					vdd_1v0: sd0 {
+						regulator-name = "VDDIO_SYS_1V0";
+						regulator-min-microvolt = <1000000>;
+						regulator-max-microvolt = <1000000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_1v8hs: sd1 {
+						regulator-name = "VDDIO_SYS_1V8HS";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_1v8ls: sd2 {
+						regulator-name = "VDDIO_SYS_1V8LS";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					vdd_1v8ao: sd3 {
+						regulator-name = "VDDIO_AO_1V8";
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					sd4 {
+						regulator-name = "VDD_DDR_1V1";
+						regulator-min-microvolt = <1100000>;
+						regulator-max-microvolt = <1100000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo0 {
+						regulator-name = "VDD_RTC";
+						regulator-min-microvolt = <800000>;
+						regulator-max-microvolt = <800000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo2 {
+						regulator-name = "VDDIO_AO_3V3";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo3 {
+						regulator-name = "VDD_EMMC_3V3";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					vdd_usb_3v3: ldo5 {
+						regulator-name = "VDD_USB_3V3";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+						regulator-always-on;
+						regulator-boot-on;
+					};
+
+					ldo6 {
+						regulator-name = "VDD_SDIO_3V3";
+						regulator-min-microvolt = <3300000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					ldo7 {
+						regulator-name = "AVDD_CSI_1V2";
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+					};
+				};
+			};
+		};
+	};
+
+	vdd_3v3_sd: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3_SD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio TEGRA194_MAIN_GPIO(G, 2) GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+		enable-active-high;
+	};
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index 4bc187a4eacd..48160f48003a 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -16,7 +16,7 @@
 	#size-cells = <2>;
 
 	/* control backbone */
-	cbb@0 {
+	bus@0 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -59,6 +59,9 @@
 			clock-names = "master_bus", "slave_bus", "rx", "tx", "ptp_ref";
 			resets = <&bpmp TEGRA194_RESET_EQOS>;
 			reset-names = "eqos";
+			interconnects = <&mc TEGRA194_MEMORY_CLIENT_EQOSR &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_EQOSW &emc>;
+			interconnect-names = "dma-mem", "write";
 			status = "disabled";
 
 			snps,write-requests = <1>;
@@ -141,8 +144,8 @@
 
 		pinmux: pinmux@2430000 {
 			compatible = "nvidia,tegra194-pinmux";
-			reg = <0x2430000 0x17000
-			       0xc300000 0x4000>;
+			reg = <0x2430000 0x17000>,
+			      <0xc300000 0x4000>;
 
 			status = "okay";
 
@@ -176,6 +179,8 @@
 			reg = <0x02c00000 0x100000>,
 			      <0x02b80000 0x040000>,
 			      <0x01700000 0x100000>;
+			interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+			#interconnect-cells = <1>;
 			status = "disabled";
 
 			#address-cells = <2>;
@@ -209,6 +214,8 @@
 				clocks = <&bpmp TEGRA194_CLK_EMC>;
 				clock-names = "emc";
 
+				#interconnect-cells = <0>;
+
 				nvidia,bpmp = <&bpmp>;
 			};
 		};
@@ -449,14 +456,17 @@
 			#pwm-cells = <2>;
 		};
 
-		sdmmc1: sdhci@3400000 {
-			compatible = "nvidia,tegra194-sdhci", "nvidia,tegra186-sdhci";
+		sdmmc1: mmc@3400000 {
+			compatible = "nvidia,tegra194-sdhci";
 			reg = <0x03400000 0x10000>;
 			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA194_CLK_SDMMC1>;
 			clock-names = "sdhci";
 			resets = <&bpmp TEGRA194_RESET_SDMMC1>;
 			reset-names = "sdhci";
+			interconnects = <&mc TEGRA194_MEMORY_CLIENT_SDMMCRA &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_SDMMCWA &emc>;
+			interconnect-names = "dma-mem", "write";
 			nvidia,pad-autocal-pull-up-offset-3v3-timeout =
 									<0x07>;
 			nvidia,pad-autocal-pull-down-offset-3v3-timeout =
@@ -471,14 +481,17 @@
 			status = "disabled";
 		};
 
-		sdmmc3: sdhci@3440000 {
-			compatible = "nvidia,tegra194-sdhci", "nvidia,tegra186-sdhci";
+		sdmmc3: mmc@3440000 {
+			compatible = "nvidia,tegra194-sdhci";
 			reg = <0x03440000 0x10000>;
 			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA194_CLK_SDMMC3>;
 			clock-names = "sdhci";
 			resets = <&bpmp TEGRA194_RESET_SDMMC3>;
 			reset-names = "sdhci";
+			interconnects = <&mc TEGRA194_MEMORY_CLIENT_SDMMCR &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_SDMMCW &emc>;
+			interconnect-names = "dma-mem", "write";
 			nvidia,pad-autocal-pull-up-offset-1v8 = <0x00>;
 			nvidia,pad-autocal-pull-down-offset-1v8 = <0x7a>;
 			nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x07>;
@@ -494,8 +507,8 @@
 			status = "disabled";
 		};
 
-		sdmmc4: sdhci@3460000 {
-			compatible = "nvidia,tegra194-sdhci", "nvidia,tegra186-sdhci";
+		sdmmc4: mmc@3460000 {
+			compatible = "nvidia,tegra194-sdhci";
 			reg = <0x03460000 0x10000>;
 			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&bpmp TEGRA194_CLK_SDMMC4>;
@@ -506,6 +519,9 @@
 					  <&bpmp TEGRA194_CLK_PLLC4>;
 			resets = <&bpmp TEGRA194_RESET_SDMMC4>;
 			reset-names = "sdhci";
+			interconnects = <&mc TEGRA194_MEMORY_CLIENT_SDMMCRAB &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_SDMMCWAB &emc>;
+			interconnect-names = "dma-mem", "write";
 			nvidia,pad-autocal-pull-up-offset-hs400 = <0x00>;
 			nvidia,pad-autocal-pull-down-offset-hs400 = <0x00>;
 			nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x0a>;
@@ -534,6 +550,9 @@
 				 <&bpmp TEGRA194_RESET_HDA2HDMICODEC>;
 			reset-names = "hda", "hda2codec_2x", "hda2hdmi";
 			power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
+			interconnects = <&mc TEGRA194_MEMORY_CLIENT_HDAR &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_HDAW &emc>;
+			interconnect-names = "dma-mem", "write";
 			status = "disabled";
 		};
 
@@ -669,8 +688,7 @@
 			reg-names = "hcd", "fpci";
 
 			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&bpmp TEGRA194_CLK_XUSB_CORE_HOST>,
 				 <&bpmp TEGRA194_CLK_XUSB_FALCON>,
@@ -981,10 +999,7 @@
 			reg-names = "security", "gpio";
 			reg = <0xc2f0000 0x1000>,
 			      <0xc2f1000 0x1000>;
-			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
@@ -1017,12 +1032,13 @@
 		};
 
 		host1x@13e00000 {
-			compatible = "nvidia,tegra194-host1x", "simple-bus";
+			compatible = "nvidia,tegra194-host1x";
 			reg = <0x13e00000 0x10000>,
 			      <0x13e10000 0x10000>;
 			reg-names = "hypervisor", "vm";
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "syncpt", "host1x";
 			clocks = <&bpmp TEGRA194_CLK_HOST1X>;
 			clock-names = "host1x";
 			resets = <&bpmp TEGRA194_RESET_HOST1X>;
@@ -1032,9 +1048,11 @@
 			#size-cells = <1>;
 
 			ranges = <0x15000000 0x15000000 0x01000000>;
+			interconnects = <&mc TEGRA194_MEMORY_CLIENT_HOST1XDMAR &emc>;
+			interconnect-names = "dma-mem";
 
 			display-hub@15200000 {
-				compatible = "nvidia,tegra194-display", "simple-bus";
+				compatible = "nvidia,tegra194-display";
 				reg = <0x15200000 0x00040000>;
 				resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_MISC>,
 					 <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP0>,
@@ -1067,6 +1085,9 @@
 					reset-names = "dc";
 
 					power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
+					interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>,
+							<&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+					interconnect-names = "dma-mem", "read-1";
 
 					nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>;
 					nvidia,head = <0>;
@@ -1082,6 +1103,9 @@
 					reset-names = "dc";
 
 					power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISPB>;
+					interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>,
+							<&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+					interconnect-names = "dma-mem", "read-1";
 
 					nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>;
 					nvidia,head = <1>;
@@ -1097,6 +1121,9 @@
 					reset-names = "dc";
 
 					power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISPC>;
+					interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>,
+							<&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+					interconnect-names = "dma-mem", "read-1";
 
 					nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>;
 					nvidia,head = <2>;
@@ -1112,6 +1139,9 @@
 					reset-names = "dc";
 
 					power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISPC>;
+					interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>,
+							<&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>;
+					interconnect-names = "dma-mem", "read-1";
 
 					nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>;
 					nvidia,head = <3>;
@@ -1128,6 +1158,9 @@
 				reset-names = "vic";
 
 				power-domains = <&bpmp TEGRA194_POWER_DOMAIN_VIC>;
+				interconnects = <&mc TEGRA194_MEMORY_CLIENT_VICSRD &emc>,
+						<&mc TEGRA194_MEMORY_CLIENT_VICSWR &emc>;
+				interconnect-names = "dma-mem", "write";
 			};
 
 			dpaux0: dpaux@155c0000 {
@@ -1362,15 +1395,49 @@
 				nvidia,interface = <3>;
 			};
 		};
+
+		gpu@17000000 {
+			compatible = "nvidia,gv11b";
+			reg = <0x17000000 0x10000000>,
+			      <0x18000000 0x10000000>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "stall", "nonstall";
+			clocks = <&bpmp TEGRA194_CLK_GPCCLK>,
+				 <&bpmp TEGRA194_CLK_GPU_PWR>,
+				 <&bpmp TEGRA194_CLK_FUSE>;
+			clock-names = "gpu", "pwr", "fuse";
+			resets = <&bpmp TEGRA194_RESET_GPU>;
+			reset-names = "gpu";
+			dma-coherent;
+
+			power-domains = <&bpmp TEGRA194_POWER_DOMAIN_GPU>;
+			interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVL1R &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_NVL1RHP &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_NVL1W &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_NVL2R &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_NVL2RHP &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_NVL2W &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_NVL3R &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_NVL3RHP &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_NVL3W &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_NVL4R &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_NVL4RHP &emc>,
+					<&mc TEGRA194_MEMORY_CLIENT_NVL4W &emc>;
+			interconnect-names = "dma-mem", "read-0-hp", "write-0",
+					     "read-1", "read-1-hp", "write-1",
+					     "read-2", "read-2-hp", "write-2",
+					     "read-3", "read-3-hp", "write-3";
+		};
 	};
 
 	pcie@14100000 {
 		compatible = "nvidia,tegra194-pcie";
 		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX1A>;
-		reg = <0x00 0x14100000 0x0 0x00020000   /* appl registers (128K)      */
-		       0x00 0x30000000 0x0 0x00040000   /* configuration space (256K) */
-		       0x00 0x30040000 0x0 0x00040000   /* iATU_DMA reg space (256K)  */
-		       0x00 0x30080000 0x0 0x00040000>; /* DBI reg space (256K)       */
+		reg = <0x00 0x14100000 0x0 0x00020000>, /* appl registers (128K)      */
+		      <0x00 0x30000000 0x0 0x00040000>, /* configuration space (256K) */
+		      <0x00 0x30040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+		      <0x00 0x30080000 0x0 0x00040000>; /* DBI reg space (256K)       */
 		reg-names = "appl", "config", "atu_dma", "dbi";
 
 		status = "disabled";
@@ -1389,8 +1456,8 @@
 			 <&bpmp TEGRA194_RESET_PEX0_CORE_1>;
 		reset-names = "apb", "core";
 
-		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,	/* controller interrupt */
-			     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;	/* MSI interrupt */
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+			     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
 		interrupt-names = "intr", "msi";
 
 		#interrupt-cells = <1>;
@@ -1404,18 +1471,23 @@
 		nvidia,aspm-l0s-entrance-latency-us = <3>;
 
 		bus-range = <0x0 0xff>;
-		ranges = <0x81000000 0x0  0x30100000 0x0  0x30100000 0x0 0x00100000   /* downstream I/O (1MB) */
-			  0xc3000000 0x12 0x00000000 0x12 0x00000000 0x0 0x30000000   /* prefetchable memory (768MB) */
-			  0x82000000 0x0  0x40000000 0x12 0x30000000 0x0 0x10000000>; /* non-prefetchable memory (256MB) */
+
+		ranges = <0x43000000 0x12 0x00000000 0x12 0x00000000 0x0 0x30000000>, /* prefetchable memory (768 MiB) */
+			 <0x02000000 0x0  0x40000000 0x12 0x30000000 0x0 0x0fff0000>, /* non-prefetchable memory (256 MiB - 64 KiB) */
+			 <0x01000000 0x0  0x00000000 0x12 0x3fff0000 0x0 0x00010000>; /* downstream I/O (64 KiB) */
+
+		interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE1R &emc>,
+				<&mc TEGRA194_MEMORY_CLIENT_PCIE1W &emc>;
+		interconnect-names = "read", "write";
 	};
 
 	pcie@14120000 {
 		compatible = "nvidia,tegra194-pcie";
 		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX1A>;
-		reg = <0x00 0x14120000 0x0 0x00020000   /* appl registers (128K)      */
-		       0x00 0x32000000 0x0 0x00040000   /* configuration space (256K) */
-		       0x00 0x32040000 0x0 0x00040000   /* iATU_DMA reg space (256K)  */
-		       0x00 0x32080000 0x0 0x00040000>; /* DBI reg space (256K)       */
+		reg = <0x00 0x14120000 0x0 0x00020000>, /* appl registers (128K)      */
+		      <0x00 0x32000000 0x0 0x00040000>, /* configuration space (256K) */
+		      <0x00 0x32040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+		      <0x00 0x32080000 0x0 0x00040000>; /* DBI reg space (256K)       */
 		reg-names = "appl", "config", "atu_dma", "dbi";
 
 		status = "disabled";
@@ -1434,8 +1506,8 @@
 			 <&bpmp TEGRA194_RESET_PEX0_CORE_2>;
 		reset-names = "apb", "core";
 
-		interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,	/* controller interrupt */
-			     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;	/* MSI interrupt */
+		interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+			     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
 		interrupt-names = "intr", "msi";
 
 		#interrupt-cells = <1>;
@@ -1449,18 +1521,23 @@
 		nvidia,aspm-l0s-entrance-latency-us = <3>;
 
 		bus-range = <0x0 0xff>;
-		ranges = <0x81000000 0x0  0x32100000 0x0  0x32100000 0x0 0x00100000   /* downstream I/O (1MB) */
-			  0xc3000000 0x12 0x40000000 0x12 0x40000000 0x0 0x30000000   /* prefetchable memory (768MB) */
-			  0x82000000 0x0  0x40000000 0x12 0x70000000 0x0 0x10000000>; /* non-prefetchable memory (256MB) */
+
+		ranges = <0x43000000 0x12 0x40000000 0x12 0x40000000 0x0 0x30000000>, /* prefetchable memory (768 MiB) */
+			 <0x02000000 0x0  0x40000000 0x12 0x70000000 0x0 0x0fff0000>, /* non-prefetchable memory (256 MiB - 64 KiB) */
+			 <0x01000000 0x0  0x00000000 0x12 0x7fff0000 0x0 0x00010000>; /* downstream I/O (64 KiB) */
+
+		interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE2AR &emc>,
+				<&mc TEGRA194_MEMORY_CLIENT_PCIE2AW &emc>;
+		interconnect-names = "read", "write";
 	};
 
 	pcie@14140000 {
 		compatible = "nvidia,tegra194-pcie";
 		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX1A>;
-		reg = <0x00 0x14140000 0x0 0x00020000   /* appl registers (128K)      */
-		       0x00 0x34000000 0x0 0x00040000   /* configuration space (256K) */
-		       0x00 0x34040000 0x0 0x00040000   /* iATU_DMA reg space (256K)  */
-		       0x00 0x34080000 0x0 0x00040000>; /* DBI reg space (256K)       */
+		reg = <0x00 0x14140000 0x0 0x00020000>, /* appl registers (128K)      */
+		      <0x00 0x34000000 0x0 0x00040000>, /* configuration space (256K) */
+		      <0x00 0x34040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+		      <0x00 0x34080000 0x0 0x00040000>; /* DBI reg space (256K)       */
 		reg-names = "appl", "config", "atu_dma", "dbi";
 
 		status = "disabled";
@@ -1479,8 +1556,8 @@
 			 <&bpmp TEGRA194_RESET_PEX0_CORE_3>;
 		reset-names = "apb", "core";
 
-		interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,	/* controller interrupt */
-			     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;	/* MSI interrupt */
+		interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+			     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
 		interrupt-names = "intr", "msi";
 
 		#interrupt-cells = <1>;
@@ -1494,18 +1571,23 @@
 		nvidia,aspm-l0s-entrance-latency-us = <3>;
 
 		bus-range = <0x0 0xff>;
-		ranges = <0x81000000 0x0  0x34100000 0x0  0x34100000 0x0 0x00100000   /* downstream I/O (1MB) */
-			  0xc3000000 0x12 0x80000000 0x12 0x80000000 0x0 0x30000000   /* prefetchable memory (768MB) */
-			  0x82000000 0x0  0x40000000 0x12 0xb0000000 0x0 0x10000000>; /* non-prefetchable memory (256MB) */
+
+		ranges = <0x43000000 0x12 0x80000000 0x12 0x80000000 0x0 0x30000000>, /* prefetchable memory (768 MiB) */
+			 <0x02000000 0x0  0x40000000 0x12 0xb0000000 0x0 0x0fff0000>, /* non-prefetchable memory (256 MiB + 64 KiB) */
+			 <0x01000000 0x0  0x00000000 0x12 0xbfff0000 0x0 0x00010000>; /* downstream I/O (64 KiB) */
+
+		interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE3R &emc>,
+				<&mc TEGRA194_MEMORY_CLIENT_PCIE3W &emc>;
+		interconnect-names = "read", "write";
 	};
 
 	pcie@14160000 {
 		compatible = "nvidia,tegra194-pcie";
 		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX4A>;
-		reg = <0x00 0x14160000 0x0 0x00020000   /* appl registers (128K)      */
-		       0x00 0x36000000 0x0 0x00040000   /* configuration space (256K) */
-		       0x00 0x36040000 0x0 0x00040000   /* iATU_DMA reg space (256K)  */
-		       0x00 0x36080000 0x0 0x00040000>; /* DBI reg space (256K)       */
+		reg = <0x00 0x14160000 0x0 0x00020000>, /* appl registers (128K)      */
+		      <0x00 0x36000000 0x0 0x00040000>, /* configuration space (256K) */
+		      <0x00 0x36040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+		      <0x00 0x36080000 0x0 0x00040000>; /* DBI reg space (256K)       */
 		reg-names = "appl", "config", "atu_dma", "dbi";
 
 		status = "disabled";
@@ -1524,8 +1606,8 @@
 			 <&bpmp TEGRA194_RESET_PEX0_CORE_4>;
 		reset-names = "apb", "core";
 
-		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,	/* controller interrupt */
-			     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;	/* MSI interrupt */
+		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+			     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
 		interrupt-names = "intr", "msi";
 
 		#interrupt-cells = <1>;
@@ -1539,18 +1621,23 @@
 		nvidia,aspm-l0s-entrance-latency-us = <3>;
 
 		bus-range = <0x0 0xff>;
-		ranges = <0x81000000 0x0  0x36100000 0x0  0x36100000 0x0 0x00100000   /* downstream I/O (1MB) */
-			  0xc3000000 0x14 0x00000000 0x14 0x00000000 0x3 0x40000000   /* prefetchable memory (13GB) */
-			  0x82000000 0x0  0x40000000 0x17 0x40000000 0x0 0xc0000000>; /* non-prefetchable memory (3GB) */
+
+		ranges = <0x43000000 0x14 0x00000000 0x14 0x00000000 0x3 0x40000000>, /* prefetchable memory (13 GiB) */
+			 <0x02000000 0x0  0x40000000 0x17 0x40000000 0x0 0xbfff0000>, /* non-prefetchable memory (3 GiB - 64 KiB) */
+			 <0x01000000 0x0  0x00000000 0x17 0xffff0000 0x0 0x00010000>; /* downstream I/O (64 KiB) */
+
+		interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE4R &emc>,
+				<&mc TEGRA194_MEMORY_CLIENT_PCIE4W &emc>;
+		interconnect-names = "read", "write";
 	};
 
 	pcie@14180000 {
 		compatible = "nvidia,tegra194-pcie";
 		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>;
-		reg = <0x00 0x14180000 0x0 0x00020000   /* appl registers (128K)      */
-		       0x00 0x38000000 0x0 0x00040000   /* configuration space (256K) */
-		       0x00 0x38040000 0x0 0x00040000   /* iATU_DMA reg space (256K)  */
-		       0x00 0x38080000 0x0 0x00040000>; /* DBI reg space (256K)       */
+		reg = <0x00 0x14180000 0x0 0x00020000>, /* appl registers (128K)      */
+		      <0x00 0x38000000 0x0 0x00040000>, /* configuration space (256K) */
+		      <0x00 0x38040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+		      <0x00 0x38080000 0x0 0x00040000>; /* DBI reg space (256K)       */
 		reg-names = "appl", "config", "atu_dma", "dbi";
 
 		status = "disabled";
@@ -1569,8 +1656,8 @@
 			 <&bpmp TEGRA194_RESET_PEX0_CORE_0>;
 		reset-names = "apb", "core";
 
-		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,	/* controller interrupt */
-			     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;	/* MSI interrupt */
+		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+			     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
 		interrupt-names = "intr", "msi";
 
 		#interrupt-cells = <1>;
@@ -1584,18 +1671,23 @@
 		nvidia,aspm-l0s-entrance-latency-us = <3>;
 
 		bus-range = <0x0 0xff>;
-		ranges = <0x81000000 0x0  0x38100000 0x0  0x38100000 0x0 0x00100000   /* downstream I/O (1MB) */
-			  0xc3000000 0x18 0x00000000 0x18 0x00000000 0x3 0x40000000   /* prefetchable memory (13GB) */
-			  0x82000000 0x0  0x40000000 0x1b 0x40000000 0x0 0xc0000000>; /* non-prefetchable memory (3GB) */
+
+		ranges = <0x43000000 0x18 0x00000000 0x18 0x00000000 0x3 0x40000000>, /* prefetchable memory (13 GiB) */
+			 <0x02000000 0x0  0x40000000 0x1b 0x40000000 0x0 0xbfff0000>, /* non-prefetchable memory (3 GiB - 64 KiB) */
+			 <0x01000000 0x0  0x00000000 0x1b 0xffff0000 0x0 0x00010000>; /* downstream I/O (64 KiB) */
+
+		interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE0R &emc>,
+				<&mc TEGRA194_MEMORY_CLIENT_PCIE0W &emc>;
+		interconnect-names = "read", "write";
 	};
 
 	pcie@141a0000 {
 		compatible = "nvidia,tegra194-pcie";
 		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>;
-		reg = <0x00 0x141a0000 0x0 0x00020000   /* appl registers (128K)      */
-		       0x00 0x3a000000 0x0 0x00040000   /* configuration space (256K) */
-		       0x00 0x3a040000 0x0 0x00040000   /* iATU_DMA reg space (256K)  */
-		       0x00 0x3a080000 0x0 0x00040000>; /* DBI reg space (256K)       */
+		reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K)      */
+		      <0x00 0x3a000000 0x0 0x00040000>, /* configuration space (256K) */
+		      <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+		      <0x00 0x3a080000 0x0 0x00040000>; /* DBI reg space (256K)       */
 		reg-names = "appl", "config", "atu_dma", "dbi";
 
 		status = "disabled";
@@ -1611,15 +1703,15 @@
 		pinctrl-0 = <&pex_rst_c5_out_state>, <&clkreq_c5_bi_dir_state>;
 
 		clocks = <&bpmp TEGRA194_CLK_PEX1_CORE_5>,
-			<&bpmp TEGRA194_CLK_PEX1_CORE_5M>;
+			 <&bpmp TEGRA194_CLK_PEX1_CORE_5M>;
 		clock-names = "core", "core_m";
 
 		resets = <&bpmp TEGRA194_RESET_PEX1_CORE_5_APB>,
 			 <&bpmp TEGRA194_RESET_PEX1_CORE_5>;
 		reset-names = "apb", "core";
 
-		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,	/* controller interrupt */
-			     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;	/* MSI interrupt */
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
+			     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
 		interrupt-names = "intr", "msi";
 
 		nvidia,bpmp = <&bpmp 5>;
@@ -1633,18 +1725,23 @@
 		nvidia,aspm-l0s-entrance-latency-us = <3>;
 
 		bus-range = <0x0 0xff>;
-		ranges = <0x81000000 0x0  0x3a100000 0x0  0x3a100000 0x0 0x00100000   /* downstream I/O (1MB) */
-			  0xc3000000 0x1c 0x00000000 0x1c 0x00000000 0x3 0x40000000   /* prefetchable memory (13GB) */
-			  0x82000000 0x0  0x40000000 0x1f 0x40000000 0x0 0xc0000000>; /* non-prefetchable memory (3GB) */
+
+		ranges = <0x43000000 0x1c 0x00000000 0x1c 0x00000000 0x3 0x40000000>, /* prefetchable memory (13 GiB) */
+			 <0x02000000 0x0  0x40000000 0x1f 0x40000000 0x0 0xbfff0000>, /* non-prefetchable memory (3 GiB - 64 KiB) */
+			 <0x01000000 0x0  0x00000000 0x1f 0xffff0000 0x0 0x00010000>; /* downstream I/O (64 KiB) */
+
+		interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE5R &emc>,
+				<&mc TEGRA194_MEMORY_CLIENT_PCIE5W &emc>;
+		interconnect-names = "read", "write";
 	};
 
 	pcie_ep@14160000 {
 		compatible = "nvidia,tegra194-pcie-ep", "snps,dw-pcie-ep";
 		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX4A>;
-		reg = <0x00 0x14160000 0x0 0x00020000   /* appl registers (128K)      */
-		       0x00 0x36040000 0x0 0x00040000   /* iATU_DMA reg space (256K)  */
-		       0x00 0x36080000 0x0 0x00040000   /* DBI reg space (256K)       */
-		       0x14 0x00000000 0x4 0x00000000>; /* Address Space (16G)        */
+		reg = <0x00 0x14160000 0x0 0x00020000>, /* appl registers (128K)      */
+		      <0x00 0x36040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+		      <0x00 0x36080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+		      <0x14 0x00000000 0x4 0x00000000>; /* Address Space (16G)        */
 		reg-names = "appl", "atu_dma", "dbi", "addr_space";
 
 		status = "disabled";
@@ -1673,10 +1770,10 @@
 	pcie_ep@14180000 {
 		compatible = "nvidia,tegra194-pcie-ep", "snps,dw-pcie-ep";
 		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>;
-		reg = <0x00 0x14180000 0x0 0x00020000   /* appl registers (128K)      */
-		       0x00 0x38040000 0x0 0x00040000   /* iATU_DMA reg space (256K)  */
-		       0x00 0x38080000 0x0 0x00040000   /* DBI reg space (256K)       */
-		       0x18 0x00000000 0x4 0x00000000>; /* Address Space (16G)        */
+		reg = <0x00 0x14180000 0x0 0x00020000>, /* appl registers (128K)      */
+		      <0x00 0x38040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+		      <0x00 0x38080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+		      <0x18 0x00000000 0x4 0x00000000>; /* Address Space (16G)        */
 		reg-names = "appl", "atu_dma", "dbi", "addr_space";
 
 		status = "disabled";
@@ -1705,10 +1802,10 @@
 	pcie_ep@141a0000 {
 		compatible = "nvidia,tegra194-pcie-ep", "snps,dw-pcie-ep";
 		power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>;
-		reg = <0x00 0x141a0000 0x0 0x00020000   /* appl registers (128K)      */
-		       0x00 0x3a040000 0x0 0x00040000   /* iATU_DMA reg space (256K)  */
-		       0x00 0x3a080000 0x0 0x00040000   /* DBI reg space (256K)       */
-		       0x1c 0x00000000 0x4 0x00000000>; /* Address Space (16G)        */
+		reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K)      */
+		      <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K)  */
+		      <0x00 0x3a080000 0x0 0x00040000>, /* DBI reg space (256K)       */
+		      <0x1c 0x00000000 0x4 0x00000000>; /* Address Space (16G)        */
 		reg-names = "appl", "atu_dma", "dbi", "addr_space";
 
 		status = "disabled";
@@ -1737,22 +1834,20 @@
 		nvidia,aspm-l0s-entrance-latency-us = <3>;
 	};
 
-	sysram@40000000 {
+	sram@40000000 {
 		compatible = "nvidia,tegra194-sysram", "mmio-sram";
 		reg = <0x0 0x40000000 0x0 0x50000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0x40000000 0x50000>;
 
-		cpu_bpmp_tx: shmem@4e000 {
-			compatible = "nvidia,tegra194-bpmp-shmem";
+		cpu_bpmp_tx: sram@4e000 {
 			reg = <0x4e000 0x1000>;
 			label = "cpu-bpmp-tx";
 			pool;
 		};
 
-		cpu_bpmp_rx: shmem@4f000 {
-			compatible = "nvidia,tegra194-bpmp-shmem";
+		cpu_bpmp_rx: sram@4f000 {
 			reg = <0x4f000 0x1000>;
 			label = "cpu-bpmp-rx";
 			pool;
@@ -1767,6 +1862,11 @@
 		#clock-cells = <1>;
 		#reset-cells = <1>;
 		#power-domain-cells = <1>;
+		interconnects = <&mc TEGRA194_MEMORY_CLIENT_BPMPR &emc>,
+				<&mc TEGRA194_MEMORY_CLIENT_BPMPW &emc>,
+				<&mc TEGRA194_MEMORY_CLIENT_BPMPDMAR &emc>,
+				<&mc TEGRA194_MEMORY_CLIENT_BPMPDMAW &emc>;
+		interconnect-names = "read", "write", "dma-mem", "dma-write";
 
 		bpmp_i2c: i2c {
 			compatible = "nvidia,tegra186-bpmp-i2c";
@@ -1782,6 +1882,8 @@
 	};
 
 	cpus {
+		compatible = "nvidia,tegra194-ccplex";
+		nvidia,bpmp = <&bpmp>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
index cc6ed45a2b48..6a4b50aaa25d 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
@@ -17,7 +17,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x1 0x0>;
 	};
@@ -274,8 +274,8 @@
 			reg = <0x50>;
 
 			vcc-supply = <&vdd_1v8>;
-			address-bits = <8>;
-			page-size = <8>;
+			address-width = <8>;
+			pagesize = <8>;
 			size = <256>;
 			read-only;
 		};
@@ -293,24 +293,17 @@
 	};
 
 	/* eMMC */
-	sdhci@700b0600 {
+	mmc@700b0600 {
 		status = "okay";
 		bus-width = <8>;
 		non-removable;
 		vqmmc-supply = <&vdd_1v8>;
 	};
 
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
+	clk32k_in: clock@0 {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
 	};
 
 	cpus {
@@ -342,18 +335,15 @@
 		method = "smc";
 	};
 
-	regulators {
-		vdd_gpu: regulator@100 {
-			compatible = "pwm-regulator";
-			reg = <100>;
-			pwms = <&pwm 1 4880>;
-			regulator-name = "VDD_GPU";
-			regulator-min-microvolt = <710000>;
-			regulator-max-microvolt = <1320000>;
-			enable-gpios = <&pmic 6 GPIO_ACTIVE_HIGH>;
-			regulator-ramp-delay = <80>;
-			regulator-enable-ramp-delay = <2000>;
-			regulator-settling-time-us = <160>;
-		};
+	vdd_gpu: regulator@100 {
+		compatible = "pwm-regulator";
+		pwms = <&pwm 1 4880>;
+		regulator-name = "VDD_GPU";
+		regulator-min-microvolt = <710000>;
+		regulator-max-microvolt = <1320000>;
+		enable-gpios = <&pmic 6 GPIO_ACTIVE_HIGH>;
+		regulator-ramp-delay = <80>;
+		regulator-enable-ramp-delay = <2000>;
+		regulator-settling-time-us = <160>;
 	};
 };
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts
index ea0e1efa6973..56adf287a82c 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts
@@ -87,8 +87,8 @@
 			reg = <0x57>;
 
 			vcc-supply = <&vdd_1v8>;
-			address-bits = <8>;
-			page-size = <8>;
+			address-width = <8>;
+			pagesize = <8>;
 			size = <256>;
 			read-only;
 		};
@@ -122,7 +122,7 @@
 			status = "okay";
 		};
 
-		agic@702f9000 {
+		interrupt-controller@702f9000 {
 			status = "okay";
 		};
 	};
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi
index d0dc03923723..58aa0518965e 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2530.dtsi
@@ -14,7 +14,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x0 0xc0000000>;
 	};
@@ -34,23 +34,16 @@
 	};
 
 	/* eMMC */
-	sdhci@700b0600 {
+	mmc@700b0600 {
 		status = "okay";
 		bus-width = <8>;
 		non-removable;
 	};
 
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
+	clk32k_in: clock@0 {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
 	};
 
 	cpus {
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
index b57d837d5fc7..e18e1a9a3011 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi
@@ -27,8 +27,8 @@
 		sor@54580000 {
 			status = "okay";
 
-			avdd-io-supply = <&avdd_1v05>;
-			vdd-pll-supply = <&vdd_1v8>;
+			avdd-io-hdmi-dp-supply = <&avdd_1v05>;
+			vdd-hdmi-dp-pll-supply = <&vdd_1v8>;
 			hdmi-supply = <&vdd_hdmi>;
 
 			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
@@ -1323,6 +1323,14 @@
 			#gpio-cells = <2>;
 			gpio-controller;
 		};
+
+		exp2: gpio@77 {
+			compatible = "ti,tca9539";
+			reg = <0x77>;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+		};
 	};
 
 	/* HDMI DDC */
@@ -1461,17 +1469,17 @@
 			usb2-0 {
 				status = "okay";
 				vbus-supply = <&vdd_usb_vbus_otg>;
+				usb-role-switch;
 				mode = "otg";
 
-				usb-role-switch;
 				connector {
-					compatible = "usb-b-connector",
-						     "gpio-usb-b-connector";
+					compatible = "gpio-usb-b-connector",
+						     "usb-b-connector";
 					label = "micro-USB";
 					type = "micro";
-					vbus-gpio = <&gpio TEGRA_GPIO(Z, 0)
-						     GPIO_ACTIVE_LOW>;
-					id-gpio = <&pmic 0 0>;
+					vbus-gpios = <&gpio TEGRA_GPIO(Z, 0)
+						      GPIO_ACTIVE_LOW>;
+					id-gpios = <&pmic 0 GPIO_ACTIVE_HIGH>;
 				};
 			};
 
@@ -1505,7 +1513,7 @@
 	};
 
 	/* MMC/SD */
-	sdhci@700b0000 {
+	mmc@700b0000 {
 		status = "okay";
 		bus-width = <4>;
 
@@ -1523,152 +1531,6 @@
 		hvdd-usb-supply = <&vdd_1v8>;
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vdd_sys_mux: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "VDD_SYS_MUX";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		vdd_5v0_sys: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "VDD_5V0_SYS";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_sys_mux>;
-		};
-
-		vdd_3v3_sys: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "VDD_3V3_SYS";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&pmic 3 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_sys_mux>;
-
-			regulator-enable-ramp-delay = <160>;
-			regulator-disable-ramp-delay = <10000>;
-		};
-
-		vdd_5v0_io: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "VDD_5V0_IO_SYS";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		vdd_3v3_sd: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "VDD_3V3_SD";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio TEGRA_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_3v3_sys>;
-
-			regulator-enable-ramp-delay = <472>;
-			regulator-disable-ramp-delay = <4880>;
-		};
-
-		vdd_dsi_csi: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			regulator-name = "AVDD_DSI_CSI_1V2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			vin-supply = <&vdd_sys_1v2>;
-		};
-
-		vdd_3v3_dis: regulator@6 {
-			compatible = "regulator-fixed";
-			reg = <6>;
-			regulator-name = "VDD_DIS_3V3_LCD";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-			gpio = <&exp1 3 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_3v3_sys>;
-		};
-
-		vdd_1v8_dis: regulator@7 {
-			compatible = "regulator-fixed";
-			reg = <7>;
-			regulator-name = "VDD_LCD_1V8_DIS";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-			gpio = <&exp1 14 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_1v8>;
-		};
-
-		vdd_5v0_rtl: regulator@8 {
-			compatible = "regulator-fixed";
-			reg = <8>;
-			regulator-name = "RTL_5V";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_5v0_sys>;
-		};
-
-		vdd_usb_vbus: regulator@9 {
-			compatible = "regulator-fixed";
-			reg = <9>;
-			regulator-name = "USB_VBUS_EN1";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_5v0_sys>;
-		};
-
-		vdd_usb_vbus_otg: regulator@11 {
-			compatible = "regulator-fixed";
-			reg = <9>;
-			regulator-name = "USB_VBUS_EN0";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio TEGRA_GPIO(CC, 4) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_5v0_sys>;
-		};
-
-		vdd_hdmi: regulator@10 {
-			compatible = "regulator-fixed";
-			reg = <10>;
-			regulator-name = "VDD_HDMI_5V0";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&exp1 12 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			vin-supply = <&vdd_5v0_sys>;
-		};
-	};
-
 	gpio-keys {
 		compatible = "gpio-keys";
 		label = "gpio-keys";
@@ -1692,4 +1554,162 @@
 			linux,code = <KEY_VOLUMEUP>;
 		};
 	};
+
+	vdd_sys_mux: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_SYS_MUX";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_5v0_sys: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_5V0_SYS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_sys_mux>;
+	};
+
+	vdd_3v3_sys: regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3_SYS";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&pmic 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_sys_mux>;
+
+		regulator-enable-ramp-delay = <160>;
+		regulator-disable-ramp-delay = <10000>;
+	};
+
+	vdd_5v0_io: regulator@3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_5V0_IO_SYS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_3v3_sd: regulator@4 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3_SD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio TEGRA_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+
+		regulator-enable-ramp-delay = <472>;
+		regulator-disable-ramp-delay = <4880>;
+	};
+
+	vdd_dsi_csi: regulator@5 {
+		compatible = "regulator-fixed";
+		regulator-name = "AVDD_DSI_CSI_1V2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&vdd_sys_1v2>;
+	};
+
+	vdd_3v3_dis: regulator@6 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_DIS_3V3_LCD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		gpio = <&exp1 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_1v8_dis: regulator@7 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_LCD_1V8_DIS";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		gpio = <&exp1 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_1v8>;
+	};
+
+	vdd_5v0_rtl: regulator@8 {
+		compatible = "regulator-fixed";
+		regulator-name = "RTL_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_usb_vbus: regulator@9 {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_VBUS_EN1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_usb_vbus_otg: regulator@11 {
+		compatible = "regulator-fixed";
+		regulator-name = "USB_VBUS_EN0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio TEGRA_GPIO(CC, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_hdmi: regulator@10 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_HDMI_5V0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&exp1 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_cam_1v2: regulator@11 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-cam-1v2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		gpio = <&exp2 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_cam_2v8: regulator@12 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-cam-2v8";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&exp1 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
+
+	vdd_cam_1v8: regulator@13 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-cam-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&exp2 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&vdd_3v3_sys>;
+	};
 };
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi
index 88a4b9333d84..41beab626d95 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2894.dtsi
@@ -16,7 +16,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x0 0xc0000000>;
 	};
@@ -1328,7 +1328,7 @@
 		status = "okay";
 		clock-frequency = <400000>;
 
-		max77620: max77620@3c {
+		pmic: pmic@3c {
 			compatible = "maxim,max77620";
 			reg = <0x3c>;
 			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
@@ -1343,12 +1343,12 @@
 			pinctrl-0 = <&max77620_default>;
 
 			max77620_default: pinmux@0 {
-				pin_gpio0 {
+				gpio0 {
 					pins = "gpio0";
 					function = "gpio";
 				};
 
-				pin_gpio1 {
+				gpio1 {
 					pins = "gpio1";
 					function = "fps-out";
 					drive-push-pull = <1>;
@@ -1357,37 +1357,37 @@
 					maxim,active-fps-power-down-slot = <0>;
 				};
 
-				pin_gpio2_3 {
-					pins = "gpio2", "gpio3";
+				gpio2 {
+					pins = "gpio2";
 					function = "fps-out";
 					drive-open-drain = <1>;
 					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
 				};
 
-				pin_gpio4 {
+				gpio3 {
+					pins = "gpio3";
+					function = "fps-out";
+					drive-open-drain = <1>;
+					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
+				};
+
+				gpio4 {
 					pins = "gpio4";
 					function = "32k-out1";
 				};
 
-				pin_gpio5_6_7 {
+				gpio5_6_7 {
 					pins = "gpio5", "gpio6", "gpio7";
 					function = "gpio";
 					drive-push-pull = <1>;
 				};
-
-				pin_gpio2 {
-					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
-				};
-
-				pin_gpio3 {
-					maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
-				};
 			};
 
-			spmic-default-output-high {
+			gpio@0 {
 				gpio-hog;
 				output-high;
-				gpios = <2 GPIO_ACTIVE_HIGH 7 GPIO_ACTIVE_HIGH>;
+				gpios = <2 GPIO_ACTIVE_HIGH>,
+					<7 GPIO_ACTIVE_HIGH>;
 			};
 
 			fps {
@@ -1580,23 +1580,16 @@
 		status = "okay";
 	};
 
-	sdhci@700b0600 {
+	mmc@700b0600 {
 		bus-width = <8>;
 		non-removable;
 		status = "okay";
 	};
 
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
+	clk32k_in: clock@0 {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
 	};
 
 	gpio-keys {
@@ -1642,223 +1635,198 @@
 		method = "smc";
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		device_type = "fixed-regulators";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		battery_reg: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "vdd-ac-bat";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
+	battery_reg: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-ac-bat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
 
-		vdd_3v3: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "vdd-3v3";
-			regulator-enable-ramp-delay = <160>;
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-
-			gpio = <&max77620 3 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	vdd_3v3: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-3v3";
+		regulator-enable-ramp-delay = <160>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
 
-		max77620_gpio7: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "max77620-gpio7";
-			regulator-enable-ramp-delay = <240>;
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			vin-supply = <&max77620_ldo0>;
-			regulator-always-on;
-			regulator-boot-on;
-
-			gpio = <&max77620 7 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+		gpio = <&pmic 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-		lcd_bl_en: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "lcd-bl-en";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-boot-on;
+	max77620_gpio7: regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "max77620-gpio7";
+		regulator-enable-ramp-delay = <240>;
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&max77620_ldo0>;
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-			gpio = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	lcd_bl_en: regulator@3 {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-bl-en";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
 
-		en_vdd_sd: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "en-vdd-sd";
-			regulator-enable-ramp-delay = <472>;
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			vin-supply = <&vdd_3v3>;
-
-			gpio = <&gpio TEGRA_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+		gpio = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-		en_vdd_cam: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			regulator-name = "en-vdd-cam";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
+	en_vdd_sd: regulator@4 {
+		compatible = "regulator-fixed";
+		regulator-name = "en-vdd-sd";
+		regulator-enable-ramp-delay = <472>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vdd_3v3>;
 
-			gpio = <&gpio TEGRA_GPIO(S, 4) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+		gpio = <&gpio TEGRA_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-		vdd_sys_boost: regulator@6 {
-			compatible = "regulator-fixed";
-			reg = <6>;
-			regulator-name = "vdd-sys-boost";
-			regulator-enable-ramp-delay = <3090>;
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-
-			gpio = <&max77620 1 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	en_vdd_cam: regulator@5 {
+		compatible = "regulator-fixed";
+		regulator-name = "en-vdd-cam";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
 
-		vdd_hdmi: regulator@7 {
-			compatible = "regulator-fixed";
-			reg = <7>;
-			regulator-name = "vdd-hdmi";
-			regulator-enable-ramp-delay = <468>;
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			vin-supply = <&vdd_sys_boost>;
-			regulator-boot-on;
-
-			gpio = <&gpio TEGRA_GPIO(CC, 7) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+		gpio = <&gpio TEGRA_GPIO(S, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-		en_vdd_cpu_fixed: regulator@8 {
-			compatible = "regulator-fixed";
-			reg = <8>;
-			regulator-name = "vdd-cpu-fixed";
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1000000>;
-		};
+	vdd_sys_boost: regulator@6 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-sys-boost";
+		regulator-enable-ramp-delay = <3090>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
 
-		vdd_aux_3v3: regulator@9 {
-			compatible = "regulator-fixed";
-			reg = <9>;
-			regulator-name = "aux-3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-		};
+		gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-		vdd_snsr_pm: regulator@10 {
-			compatible = "regulator-fixed";
-			reg = <10>;
-			regulator-name = "snsr_pm";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
+	vdd_hdmi: regulator@7 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-hdmi";
+		regulator-enable-ramp-delay = <468>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vdd_sys_boost>;
+		regulator-boot-on;
+
+		gpio = <&gpio TEGRA_GPIO(CC, 7) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-			enable-active-high;
-		};
+	en_vdd_cpu_fixed: regulator@8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-cpu-fixed";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+	};
 
-		vdd_usb_5v0: regulator@11 {
-			compatible = "regulator-fixed";
-			reg = <11>;
-			status = "disabled";
-			regulator-name = "vdd-usb-5v0";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			vin-supply = <&vdd_3v3>;
+	vdd_aux_3v3: regulator@9 {
+		compatible = "regulator-fixed";
+		regulator-name = "aux-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
 
-			enable-active-high;
-		};
+	vdd_snsr_pm: regulator@10 {
+		compatible = "regulator-fixed";
+		regulator-name = "snsr_pm";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
 
-		vdd_cdc_1v2_aud: regulator@101 {
-			compatible = "regulator-fixed";
-			reg = <101>;
-			status = "disabled";
-			regulator-name = "vdd_cdc_1v2_aud";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			startup-delay-us = <250000>;
+		enable-active-high;
+	};
 
-			enable-active-high;
-		};
+	vdd_usb_5v0: regulator@11 {
+		compatible = "regulator-fixed";
+		status = "disabled";
+		regulator-name = "vdd-usb-5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vdd_3v3>;
 
-		vdd_disp_3v0: regulator@12 {
-			compatible = "regulator-fixed";
-			reg = <12>;
-			regulator-name = "vdd-disp-3v0";
-			regulator-enable-ramp-delay = <232>;
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-			regulator-always-on;
-
-			gpio = <&gpio TEGRA_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+		enable-active-high;
+	};
 
-		vdd_fan: regulator@13 {
-			compatible = "regulator-fixed";
-			reg = <13>;
-			regulator-name = "vdd-fan";
-			regulator-enable-ramp-delay = <284>;
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
+	vdd_cdc_1v2_aud: regulator@101 {
+		compatible = "regulator-fixed";
+		status = "disabled";
+		regulator-name = "vdd_cdc_1v2_aud";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		startup-delay-us = <250000>;
 
-			gpio = <&gpio TEGRA_GPIO(E, 4) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+		enable-active-high;
+	};
 
-		usb_vbus1: regulator@14 {
-			compatible = "regulator-fixed";
-			reg = <14>;
-			regulator-name = "usb-vbus1";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
+	vdd_disp_3v0: regulator@12 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-disp-3v0";
+		regulator-enable-ramp-delay = <232>;
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		regulator-always-on;
 
-			gpio = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			gpio-open-drain;
-		};
+		gpio = <&gpio TEGRA_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-		usb_vbus2: regulator@15 {
-			compatible = "regulator-fixed";
-			reg = <15>;
-			regulator-name = "usb-vbus2";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
+	vdd_fan: regulator@13 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-fan";
+		regulator-enable-ramp-delay = <284>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
 
-			gpio = <&gpio TEGRA_GPIO(CC, 4) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			gpio-open-drain;
-		};
+		gpio = <&gpio TEGRA_GPIO(E, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-		vdd_3v3_eth: regulator@16 {
-			compatible = "regulator-fixed";
-			reg = <16>;
-			regulator-name = "vdd-3v3-eth-a02";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-			regulator-boot-on;
-
-			gpio = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			gpio-open-drain;
-		};
+	usb_vbus1: regulator@14 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb-vbus1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		gpio-open-drain;
+	};
+
+	usb_vbus2: regulator@15 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb-vbus2";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio TEGRA_GPIO(CC, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		gpio-open-drain;
+	};
+
+	vdd_3v3_eth: regulator@16 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-3v3-eth-a02";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+
+		gpio = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		gpio-open-drain;
 	};
 };
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
index 9bc52fdb393c..2282ea1c6279 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts
@@ -22,7 +22,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x0 0x80000000 0x1 0x0>;
 	};
@@ -64,6 +64,16 @@
 			status = "okay";
 		};
 
+		vi@54080000 {
+			status = "okay";
+
+			avdd-dsi-csi-supply = <&vdd_sys_1v2>;
+
+			csi@838 {
+				status = "okay";
+			};
+		};
+
 		sor@54540000 {
 			status = "okay";
 
@@ -77,8 +87,8 @@
 		sor@54580000 {
 			status = "okay";
 
-			avdd-io-supply = <&avdd_1v05>;
-			vdd-pll-supply = <&vdd_1v8>;
+			avdd-io-hdmi-dp-supply = <&avdd_1v05>;
+			vdd-hdmi-dp-pll-supply = <&vdd_1v8>;
 			hdmi-supply = <&vdd_hdmi>;
 
 			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
@@ -101,6 +111,22 @@
 		status = "okay";
 	};
 
+	pinmux@700008d4 {
+		dvfs_pwm_active_state: dvfs_pwm_active {
+			dvfs_pwm_pbb1 {
+				nvidia,pins = "dvfs_pwm_pbb1";
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+		};
+
+		dvfs_pwm_inactive_state: dvfs_pwm_inactive {
+			dvfs_pwm_pbb1 {
+				nvidia,pins = "dvfs_pwm_pbb1";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+		};
+	};
+
 	/* debug port */
 	serial@70006000 {
 		status = "okay";
@@ -119,8 +145,8 @@
 			reg = <0x50>;
 
 			vcc-supply = <&vdd_1v8>;
-			address-bits = <8>;
-			page-size = <8>;
+			address-width = <8>;
+			pagesize = <8>;
 			size = <256>;
 			read-only;
 		};
@@ -130,8 +156,8 @@
 			reg = <0x57>;
 
 			vcc-supply = <&vdd_1v8>;
-			address-bits = <8>;
-			page-size = <8>;
+			address-width = <8>;
+			pagesize = <8>;
 			size = <256>;
 			read-only;
 		};
@@ -513,15 +539,15 @@
 			usb2-0 {
 				status = "okay";
 				mode = "peripheral";
-
 				usb-role-switch;
+
 				connector {
-					compatible = "usb-b-connector",
-						     "gpio-usb-b-connector";
+					compatible = "gpio-usb-b-connector",
+						     "usb-b-connector";
 					label = "micro-USB";
 					type = "micro";
-					vbus-gpio = <&gpio TEGRA_GPIO(CC, 4)
-						     GPIO_ACTIVE_LOW>;
+					vbus-gpios = <&gpio TEGRA_GPIO(CC, 4)
+						      GPIO_ACTIVE_LOW>;
 				};
 			};
 
@@ -543,7 +569,7 @@
 		};
 	};
 
-	sdhci@700b0000 {
+	mmc@700b0000 {
 		status = "okay";
 		bus-width = <4>;
 
@@ -553,15 +579,7 @@
 		vmmc-supply = <&vdd_3v3_sd>;
 	};
 
-	usb@700d0000 {
-		status = "okay";
-		phys = <&micro_b>;
-		phy-names = "usb2-0";
-		avddio-usb-supply = <&vdd_3v3_sys>;
-		hvdd-usb-supply = <&vdd_1v8>;
-	};
-
-	sdhci@700b0400 {
+	mmc@700b0400 {
 		status = "okay";
 		bus-width = <4>;
 
@@ -574,17 +592,39 @@
 		wakeup-source;
 	};
 
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
+	usb@700d0000 {
+		status = "okay";
+		phys = <&micro_b>;
+		phy-names = "usb2-0";
+		avddio-usb-supply = <&vdd_3v3_sys>;
+		hvdd-usb-supply = <&vdd_1v8>;
+	};
+
+	clock@70110000 {
+		status = "okay";
 
-		clk32k_in: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
+		nvidia,cf = <6>;
+		nvidia,ci = <0>;
+		nvidia,cg = <2>;
+		nvidia,droop-ctrl = <0x00000f00>;
+		nvidia,force-mode = <1>;
+		nvidia,sample-rate = <25000>;
+
+		nvidia,pwm-min-microvolts = <708000>;
+		nvidia,pwm-period-nanoseconds = <2500>; /* 2.5us */
+		nvidia,pwm-to-pmic;
+		nvidia,pwm-tristate-microvolts = <1000000>;
+		nvidia,pwm-voltage-step-microvolts = <19200>;
+
+		pinctrl-names = "dvfs_pwm_enable", "dvfs_pwm_disable";
+		pinctrl-0 = <&dvfs_pwm_active_state>;
+		pinctrl-1 = <&dvfs_pwm_inactive_state>;
+	};
+
+	clk32k_in: clock@0 {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
 	};
 
 	cpus {
@@ -698,120 +738,109 @@
 		method = "smc";
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
+	vdd_5v0_sys: regulator@0 {
+		compatible = "regulator-fixed";
 
-		vdd_5v0_sys: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
+		regulator-name = "VDD_5V0_SYS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
 
-			regulator-name = "VDD_5V0_SYS";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
+	vdd_3v3_sys: regulator@1 {
+		compatible = "regulator-fixed";
 
-		vdd_3v3_sys: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "VDD_3V3_SYS";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-enable-ramp-delay = <240>;
-			regulator-disable-ramp-delay = <11340>;
-			regulator-always-on;
-			regulator-boot-on;
-
-			gpio = <&pmic 3 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-
-			vin-supply = <&vdd_5v0_sys>;
-		};
+		regulator-name = "VDD_3V3_SYS";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-enable-ramp-delay = <240>;
+		regulator-disable-ramp-delay = <11340>;
+		regulator-always-on;
+		regulator-boot-on;
 
-		vdd_3v3_sd: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
+		gpio = <&pmic 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 
-			regulator-name = "VDD_3V3_SD";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
+		vin-supply = <&vdd_5v0_sys>;
+	};
 
-			gpio = <&gpio TEGRA_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
+	vdd_3v3_sd: regulator@2 {
+		compatible = "regulator-fixed";
 
-			vin-supply = <&vdd_3v3_sys>;
-		};
+		regulator-name = "VDD_3V3_SD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
 
-		vdd_hdmi: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
+		gpio = <&gpio TEGRA_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 
-			regulator-name = "VDD_HDMI_5V0";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
+		vin-supply = <&vdd_3v3_sys>;
+	};
 
-			vin-supply = <&vdd_5v0_sys>;
-		};
+	vdd_hdmi: regulator@3 {
+		compatible = "regulator-fixed";
 
-		vdd_hub_3v3: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
+		regulator-name = "VDD_HDMI_5V0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
 
-			regulator-name = "VDD_HUB_3V3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
+		vin-supply = <&vdd_5v0_sys>;
+	};
 
-			gpio = <&gpio TEGRA_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
-			enable-active-high;
+	vdd_hub_3v3: regulator@4 {
+		compatible = "regulator-fixed";
 
-			vin-supply = <&vdd_5v0_sys>;
-		};
+		regulator-name = "VDD_HUB_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
 
-		vdd_cpu: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
+		gpio = <&gpio TEGRA_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 
-			regulator-name = "VDD_CPU";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-			regulator-boot-on;
+		vin-supply = <&vdd_5v0_sys>;
+	};
 
-			gpio = <&pmic 5 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
+	vdd_cpu: regulator@5 {
+		compatible = "regulator-fixed";
 
-			vin-supply = <&vdd_5v0_sys>;
-		};
+		regulator-name = "VDD_CPU";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
 
-		vdd_gpu: regulator@6 {
-			compatible = "pwm-regulator";
-			reg = <6>;
-			pwms = <&pwm 1 4880>;
-			regulator-name = "VDD_GPU";
-			regulator-min-microvolt = <710000>;
-			regulator-max-microvolt = <1320000>;
-			regulator-ramp-delay = <80>;
-			regulator-enable-ramp-delay = <2000>;
-			regulator-settling-time-us = <160>;
-			enable-gpios = <&pmic 6 GPIO_ACTIVE_HIGH>;
-			vin-supply = <&vdd_5v0_sys>;
-		};
+		gpio = <&pmic 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 
-		avdd_io_edp_1v05: regulator@7 {
-			compatible = "regulator-fixed";
-			reg = <7>;
+		vin-supply = <&vdd_5v0_sys>;
+	};
 
-			regulator-name = "AVDD_IO_EDP_1V05";
-			regulator-min-microvolt = <1050000>;
-			regulator-max-microvolt = <1050000>;
+	vdd_gpu: regulator@6 {
+		compatible = "pwm-regulator";
+		pwms = <&pwm 1 4880>;
 
-			gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
+		regulator-name = "VDD_GPU";
+		regulator-min-microvolt = <710000>;
+		regulator-max-microvolt = <1320000>;
+		regulator-ramp-delay = <80>;
+		regulator-enable-ramp-delay = <2000>;
+		regulator-settling-time-us = <160>;
 
-			vin-supply = <&avdd_1v05_pll>;
-		};
+		enable-gpios = <&pmic 6 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	avdd_io_edp_1v05: regulator@7 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "AVDD_IO_EDP_1V05";
+		regulator-min-microvolt = <1050000>;
+		regulator-max-microvolt = <1050000>;
+
+		gpio = <&pmic 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		vin-supply = <&avdd_1v05_pll>;
 	};
 };
diff --git a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
index 2faab6390552..bd78378248a6 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
@@ -1330,7 +1330,6 @@
 				battery: bq27742@55 {
 					compatible = "ti,bq27742";
 					reg = <0x55>;
-					battery-name = "battery";
 				};
 			};
 		};
@@ -1355,11 +1354,11 @@
 			maxim,enable-active-discharge;
 			maxim,enable-bias-control;
 			maxim,enable-etr;
-			maxim,enable-gpio = <&max77620 5 0>;
+			maxim,enable-gpio = <&pmic 5 0>;
 			maxim,externally-enable;
 		};
 
-		max77620: max77620@3c {
+		pmic: pmic@3c {
 			compatible = "maxim,max77620";
 			reg = <0x3c>;
 			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
@@ -1373,8 +1372,8 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&max77620_default>;
 
-			max77620_default: pinmux@0 {
-				pin_gpio {
+			max77620_default: pinmux {
+				gpio0_1_2_7 {
 					pins = "gpio0", "gpio1", "gpio2", "gpio7";
 					function = "gpio";
 				};
@@ -1384,7 +1383,7 @@
 				 * sequence, So it must be sequenced up (automatically
 				 * set by OTP) and down properly.
 				 */
-				pin_gpio3 {
+				gpio3 {
 					pins = "gpio3";
 					function = "fps-out";
 					drive-open-drain = <1>;
@@ -1393,13 +1392,13 @@
 					maxim,active-fps-power-down-slot = <2>;
 				};
 
-				pin_gpio5_6 {
+				gpio5_6 {
 					pins = "gpio5", "gpio6";
 					function = "gpio";
 					drive-push-pull = <1>;
 				};
 
-				pin_32k {
+				gpio4 {
 					pins = "gpio4";
 					function = "32k-out1";
 				};
@@ -1697,7 +1696,7 @@
 		};
 	};
 
-	sdhci@700b0600 {
+	mmc@700b0600 {
 		bus-width = <8>;
 		non-removable;
 		status = "okay";
@@ -1722,22 +1721,15 @@
 			status = "okay";
 		};
 
-		agic@702f9000 {
+		interrupt-controller@702f9000 {
 			status = "okay";
 		};
 	};
 
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
+	clk32k_in: clock@0 {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
 	};
 
 	cpus {
@@ -1815,88 +1807,73 @@
 		method = "smc";
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		device_type = "fixed-regulators";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ppvar_sys: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "PPVAR_SYS";
-			regulator-min-microvolt = <4400000>;
-			regulator-max-microvolt = <4400000>;
-			regulator-always-on;
-		};
+	ppvar_sys: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "PPVAR_SYS";
+		regulator-min-microvolt = <4400000>;
+		regulator-max-microvolt = <4400000>;
+		regulator-always-on;
+	};
 
-		pplcd_vdd: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "PPLCD_VDD";
-			regulator-min-microvolt = <4400000>;
-			regulator-max-microvolt = <4400000>;
-			gpio = <&gpio TEGRA_GPIO(V, 4) 0>;
-			enable-active-high;
-			regulator-boot-on;
-		};
+	pplcd_vdd: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "PPLCD_VDD";
+		regulator-min-microvolt = <4400000>;
+		regulator-max-microvolt = <4400000>;
+		gpio = <&gpio TEGRA_GPIO(V, 4) 0>;
+		enable-active-high;
+		regulator-boot-on;
+	};
 
-		pp3000_always: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "PP3000_ALWAYS";
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-			regulator-always-on;
-		};
+	pp3000_always: regulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "PP3000_ALWAYS";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		regulator-always-on;
+	};
 
-		pp3300: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "PP3300";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-boot-on;
-			regulator-always-on;
-			enable-active-high;
-		};
+	pp3300: regulator@3 {
+		compatible = "regulator-fixed";
+		regulator-name = "PP3300";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+		enable-active-high;
+	};
 
-		pp5000: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "PP5000";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
+	pp5000: regulator@4 {
+		compatible = "regulator-fixed";
+		regulator-name = "PP5000";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
 
-		pp1800_lcdio: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			regulator-name = "PP1800_LCDIO";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			gpio = <&gpio TEGRA_GPIO(V, 3) 0>;
-			enable-active-high;
-			regulator-boot-on;
-		};
+	pp1800_lcdio: regulator@5 {
+		compatible = "regulator-fixed";
+		regulator-name = "PP1800_LCDIO";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio TEGRA_GPIO(V, 3) 0>;
+		enable-active-high;
+		regulator-boot-on;
+	};
 
-		pp1800_cam: regulator@6 {
-			compatible = "regulator-fixed";
-			reg= <6>;
-			regulator-name = "PP1800_CAM";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			gpio = <&gpio TEGRA_GPIO(K, 3) 0>;
-			enable-active-high;
-		};
+	pp1800_cam: regulator@6 {
+		compatible = "regulator-fixed";
+		regulator-name = "PP1800_CAM";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio TEGRA_GPIO(K, 3) 0>;
+		enable-active-high;
+	};
 
-		usbc_vbus: regulator@7 {
-			compatible = "regulator-fixed";
-			reg = <7>;
-			regulator-name = "USBC_VBUS";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-		};
+	usbc_vbus: regulator@7 {
+		compatible = "regulator-fixed";
+		regulator-name = "USBC_VBUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
 	};
 };
diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
index 08655081f72d..829f786af133 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
@@ -18,9 +18,9 @@
 	pcie@1003000 {
 		compatible = "nvidia,tegra210-pcie";
 		device_type = "pci";
-		reg = <0x0 0x01003000 0x0 0x00000800   /* PADS registers */
-		       0x0 0x01003800 0x0 0x00000800   /* AFI registers */
-		       0x0 0x02000000 0x0 0x10000000>; /* configuration space */
+		reg = <0x0 0x01003000 0x0 0x00000800>, /* PADS registers */
+		      <0x0 0x01003800 0x0 0x00000800>, /* AFI registers */
+		      <0x0 0x02000000 0x0 0x10000000>; /* configuration space */
 		reg-names = "pads", "afi", "cs";
 		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */
 			     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
@@ -34,11 +34,11 @@
 		#address-cells = <3>;
 		#size-cells = <2>;
 
-		ranges = <0x82000000 0 0x01000000 0x0 0x01000000 0 0x00001000   /* port 0 configuration space */
-			  0x82000000 0 0x01001000 0x0 0x01001000 0 0x00001000   /* port 1 configuration space */
-			  0x81000000 0 0x0        0x0 0x12000000 0 0x00010000   /* downstream I/O (64 KiB) */
-			  0x82000000 0 0x13000000 0x0 0x13000000 0 0x0d000000   /* non-prefetchable memory (208 MiB) */
-			  0xc2000000 0 0x20000000 0x0 0x20000000 0 0x20000000>; /* prefetchable memory (512 MiB) */
+		ranges = <0x02000000 0 0x01000000 0x0 0x01000000 0 0x00001000>, /* port 0 configuration space */
+			 <0x02000000 0 0x01001000 0x0 0x01001000 0 0x00001000>, /* port 1 configuration space */
+			 <0x01000000 0 0x0        0x0 0x12000000 0 0x00010000>, /* downstream I/O (64 KiB) */
+			 <0x02000000 0 0x13000000 0x0 0x13000000 0 0x0d000000>, /* non-prefetchable memory (208 MiB) */
+			 <0x42000000 0 0x20000000 0x0 0x20000000 0 0x20000000>; /* prefetchable memory (512 MiB) */
 
 		clocks = <&tegra_car TEGRA210_CLK_PCIE>,
 			 <&tegra_car TEGRA210_CLK_AFI>,
@@ -86,10 +86,11 @@
 	};
 
 	host1x@50000000 {
-		compatible = "nvidia,tegra210-host1x", "simple-bus";
+		compatible = "nvidia,tegra210-host1x";
 		reg = <0x0 0x50000000 0x0 0x00034000>;
 		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
 			     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */
+		interrupt-names = "syncpt", "host1x";
 		clocks = <&tegra_car TEGRA210_CLK_HOST1X>;
 		clock-names = "host1x";
 		resets = <&tegra_car 28>;
@@ -186,9 +187,8 @@
 			compatible = "nvidia,tegra210-dc";
 			reg = <0x0 0x54200000 0x0 0x00040000>;
 			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA210_CLK_DISP1>,
-				 <&tegra_car TEGRA210_CLK_PLL_P>;
-			clock-names = "dc", "parent";
+			clocks = <&tegra_car TEGRA210_CLK_DISP1>;
+			clock-names = "dc";
 			resets = <&tegra_car 27>;
 			reset-names = "dc";
 
@@ -201,9 +201,8 @@
 			compatible = "nvidia,tegra210-dc";
 			reg = <0x0 0x54240000 0x0 0x00040000>;
 			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&tegra_car TEGRA210_CLK_DISP2>,
-				 <&tegra_car TEGRA210_CLK_PLL_P>;
-			clock-names = "dc", "parent";
+			clocks = <&tegra_car TEGRA210_CLK_DISP2>;
+			clock-names = "dc";
 			resets = <&tegra_car 26>;
 			reset-names = "dc";
 
@@ -326,7 +325,7 @@
 		};
 
 		dpaux: dpaux@545c0000 {
-			compatible = "nvidia,tegra124-dpaux";
+			compatible = "nvidia,tegra210-dpaux";
 			reg = <0x0 0x545c0000 0x0 0x00040000>;
 			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&tegra_car TEGRA210_CLK_DPAUX>,
@@ -362,6 +361,9 @@
 			compatible = "nvidia,tegra210-isp";
 			reg = <0x0 0x54600000 0x0 0x00040000>;
 			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA210_CLK_ISPA>;
+			resets = <&tegra_car 23>;
+			reset-names = "isp";
 			status = "disabled";
 		};
 
@@ -369,6 +371,9 @@
 			compatible = "nvidia,tegra210-isp";
 			reg = <0x0 0x54680000 0x0 0x00040000>;
 			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA210_CLK_ISPB>;
+			resets = <&tegra_car 3>;
+			reset-names = "isp";
 			status = "disabled";
 		};
 
@@ -376,7 +381,16 @@
 			compatible = "nvidia,tegra210-i2c-vi";
 			reg = <0x0 0x546c0000 0x0 0x00040000>;
 			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&tegra_car TEGRA210_CLK_VI_I2C>,
+				 <&tegra_car TEGRA210_CLK_I2CSLOW>;
+			clock-names = "div-clk", "slow";
+			resets = <&tegra_car 208>;
+			reset-names = "i2c";
+			power-domains = <&pd_venc>;
 			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 	};
 
@@ -998,8 +1012,8 @@
 			 <&tegra_car TEGRA210_CLK_XUSB_HOST_SRC>,
 			 <&tegra_car TEGRA210_CLK_XUSB_FALCON_SRC>,
 			 <&tegra_car TEGRA210_CLK_XUSB_SS>,
-			 <&tegra_car TEGRA210_CLK_XUSB_SS_DIV2>,
 			 <&tegra_car TEGRA210_CLK_XUSB_SS_SRC>,
+			 <&tegra_car TEGRA210_CLK_XUSB_SS_DIV2>,
 			 <&tegra_car TEGRA210_CLK_XUSB_HS_SRC>,
 			 <&tegra_car TEGRA210_CLK_XUSB_FS_SRC>,
 			 <&tegra_car TEGRA210_CLK_PLL_U_480M>,
@@ -1007,7 +1021,7 @@
 			 <&tegra_car TEGRA210_CLK_PLL_E>;
 		clock-names = "xusb_host", "xusb_host_src",
 			      "xusb_falcon_src", "xusb_ss",
-			      "xusb_ss_div2", "xusb_ss_src",
+			      "xusb_ss_src", "xusb_ss_div2",
 			      "xusb_hs_src", "xusb_fs_src",
 			      "pll_u_480m", "clk_m", "pll_e";
 		resets = <&tegra_car 89>, <&tegra_car 156>,
@@ -1176,8 +1190,8 @@
 		};
 	};
 
-	sdhci@700b0000 {
-		compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci";
+	mmc@700b0000 {
+		compatible = "nvidia,tegra210-sdhci";
 		reg = <0x0 0x700b0000 0x0 0x200>;
 		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA210_CLK_SDMMC1>;
@@ -1204,8 +1218,8 @@
 		status = "disabled";
 	};
 
-	sdhci@700b0200 {
-		compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci";
+	mmc@700b0200 {
+		compatible = "nvidia,tegra210-sdhci";
 		reg = <0x0 0x700b0200 0x0 0x200>;
 		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA210_CLK_SDMMC2>;
@@ -1221,8 +1235,8 @@
 		status = "disabled";
 	};
 
-	sdhci@700b0400 {
-		compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci";
+	mmc@700b0400 {
+		compatible = "nvidia,tegra210-sdhci";
 		reg = <0x0 0x700b0400 0x0 0x200>;
 		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA210_CLK_SDMMC3>;
@@ -1244,8 +1258,8 @@
 		status = "disabled";
 	};
 
-	sdhci@700b0600 {
-		compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci";
+	mmc@700b0600 {
+		compatible = "nvidia,tegra210-sdhci";
 		reg = <0x0 0x700b0600 0x0 0x200>;
 		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&tegra_car TEGRA210_CLK_SDMMC4>;
@@ -1356,7 +1370,7 @@
 			status = "disabled";
 		};
 
-		agic: agic@702f9000 {
+		agic: interrupt-controller@702f9000 {
 			compatible = "nvidia,tegra210-agic";
 			#interrupt-cells = <3>;
 			interrupt-controller;
@@ -1547,8 +1561,8 @@
 
 	soctherm: thermal-sensor@700e2000 {
 		compatible = "nvidia,tegra210-soctherm";
-		reg = <0x0 0x700e2000 0x0 0x600 /* SOC_THERM reg_base */
-			0x0 0x60006000 0x0 0x400>; /* CAR reg_base */
+		reg = <0x0 0x700e2000 0x0 0x600>, /* SOC_THERM reg_base */
+		      <0x0 0x60006000 0x0 0x400>; /* CAR reg_base */
 		reg-names = "soctherm-reg", "car-reg";
 		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 0f2c33d611df..d8f1466e6758 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -9,13 +9,21 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-longcheer-l8150.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-a3u-eur.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-a5u-eur.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-bullhead-rev-101.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-msft-lumia-talkman.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-xiaomi-libra.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8994-angler-rev-101.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8994-sony-xperia-kitakami-sumire.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8996-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-asus-novago-tp370ql.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-hp-envy-x2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-lenovo-miix-630.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-idp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm630-sony-xperia-ganges-kirin.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm630-sony-xperia-nile-discovery.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm630-sony-xperia-nile-pioneer.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm630-sony-xperia-nile-voyager.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm636-sony-xperia-ganges-mermaid.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm660-xiaomi-lavender.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r2.dtb
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index 8a4b790aa7ff..194343510dcb 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -453,22 +453,23 @@
 
 		*/
 
-                sound: sound {
-                        compatible = "qcom,apq8016-sbc-sndcard";
-                        reg = <0x07702000 0x4>, <0x07702004 0x4>;
-                        reg-names = "mic-iomux", "spkr-iomux";
-
-                        status = "okay";
-                        pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>;
-                        pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>;
-                        pinctrl-names = "default", "sleep";
-                        qcom,model = "DB410c";
-                        qcom,audio-routing =
-                                "AMIC2", "MIC BIAS Internal2",
-                                "AMIC3", "MIC BIAS External1";
+		sound: sound {
+			compatible = "qcom,apq8016-sbc-sndcard";
+			reg = <0x07702000 0x4>, <0x07702004 0x4>;
+			reg-names = "mic-iomux", "spkr-iomux";
+
+			status = "okay";
+			pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>;
+			pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>;
+			pinctrl-names = "default", "sleep";
+			qcom,model = "DB410c";
+			qcom,audio-routing =
+				"AMIC2", "MIC BIAS Internal2",
+				"AMIC3", "MIC BIAS External1";
+
 			external-dai-link@0 {
 				link-name = "ADV7533";
-				cpu { /* QUAT */
+				cpu {
 					sound-dai = <&lpass MI2S_QUATERNARY>;
 				};
 				codec {
@@ -476,26 +477,26 @@
 				};
 			};
 
-                        internal-codec-playback-dai-link@0 {            /* I2S - Internal codec */
-                                link-name = "WCD";
-                                cpu { /* PRIMARY */
-                                        sound-dai = <&lpass MI2S_PRIMARY>;
-                                };
-                                codec {
-                                        sound-dai = <&lpass_codec 0>, <&wcd_codec 0>;
-                                };
-                        };
-
-                        internal-codec-capture-dai-link@0 {             /* I2S - Internal codec */
-                                link-name = "WCD-Capture";
-                                cpu { /* PRIMARY */
-                                        sound-dai = <&lpass MI2S_TERTIARY>;
-                                };
-                                codec {
-                                        sound-dai = <&lpass_codec 1>, <&wcd_codec 1>;
-                                };
-                        };
-                };
+			internal-codec-playback-dai-link@0 {
+				link-name = "WCD";
+				cpu {
+					sound-dai = <&lpass MI2S_PRIMARY>;
+				};
+				codec {
+					sound-dai = <&lpass_codec 0>, <&wcd_codec 0>;
+				};
+			};
+
+			internal-codec-capture-dai-link@0 {
+				link-name = "WCD-Capture";
+				cpu {
+					sound-dai = <&lpass MI2S_TERTIARY>;
+				};
+				codec {
+					sound-dai = <&lpass_codec 1>, <&wcd_codec 1>;
+				};
+			};
+		};
 
 		spmi@200f000 {
 			pm8916@0 {
@@ -650,9 +651,9 @@
 };
 
 &wcd_codec {
-        status = "okay";
-        clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
-        clock-names = "mclk";
+	status = "okay";
+	clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
+	clock-names = "mclk";
 	qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
 	qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
 };
@@ -778,135 +779,120 @@
 	};
 };
 
+/*
+ * 2mA drive strength is not enough when connecting multiple
+ * I2C devices with different pull up resistors.
+ */
+&i2c2_default {
+	drive-strength = <16>;
+};
+
+&i2c4_default {
+	drive-strength = <16>;
+};
+
+&i2c6_default {
+	drive-strength = <16>;
+};
+
 &msmgpio {
 	msmgpio_leds: msmgpio-leds {
-		pinconf {
-			pins = "gpio21", "gpio120";
-			function = "gpio";
-			output-low;
-		};
+		pins = "gpio21", "gpio120";
+		function = "gpio";
+
+		output-low;
 	};
 
 	usb_id_default: usb-id-default {
-		pinmux {
-			function = "gpio";
-			pins = "gpio121";
-		};
+		pins = "gpio121";
+		function = "gpio";
 
-		pinconf {
-			pins = "gpio121";
-			drive-strength = <8>;
-			input-enable;
-			bias-pull-up;
-		};
+		drive-strength = <8>;
+		input-enable;
+		bias-pull-up;
 	};
 
 	adv7533_int_active: adv533-int-active {
-		pinmux {
-			function = "gpio";
-			pins = "gpio31";
-		};
-		pinconf {
-			pins = "gpio31";
-			drive-strength = <16>;
-			bias-disable;
-		};
+		pins = "gpio31";
+		function = "gpio";
+
+		drive-strength = <16>;
+		bias-disable;
 	};
 
 	adv7533_int_suspend: adv7533-int-suspend {
-		pinmux {
-			function = "gpio";
-			pins = "gpio31";
-		};
-		pinconf {
-			pins = "gpio31";
-			drive-strength = <2>;
-			bias-disable;
-		};
+		pins = "gpio31";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
 	};
 
 	adv7533_switch_active: adv7533-switch-active {
-		pinmux {
-			function = "gpio";
-			pins = "gpio32";
-		};
-		pinconf {
-			pins = "gpio32";
-			drive-strength = <16>;
-			bias-disable;
-		};
+		pins = "gpio32";
+		function = "gpio";
+
+		drive-strength = <16>;
+		bias-disable;
 	};
 
 	adv7533_switch_suspend: adv7533-switch-suspend {
-		pinmux {
-			function = "gpio";
-			pins = "gpio32";
-		};
-		pinconf {
-			pins = "gpio32";
-			drive-strength = <2>;
-			bias-disable;
-		};
+		pins = "gpio32";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
 	};
 
 	msm_key_volp_n_default: msm-key-volp-n-default {
-		pinmux {
-			function = "gpio";
-			pins = "gpio107";
-		};
-		pinconf {
-			pins = "gpio107";
-			drive-strength = <8>;
-			input-enable;
-			bias-pull-up;
-		};
+		pins = "gpio107";
+		function = "gpio";
+
+		drive-strength = <8>;
+		input-enable;
+		bias-pull-up;
 	};
 };
 
 &pm8916_gpios {
 	usb_hub_reset_pm: usb-hub-reset-pm {
-		pinconf {
-			pins = "gpio3";
-			function = PMIC_GPIO_FUNC_NORMAL;
-			input-disable;
-			output-high;
-		};
+		pins = "gpio3";
+		function = PMIC_GPIO_FUNC_NORMAL;
+
+		input-disable;
+		output-high;
 	};
 
 	usb_hub_reset_pm_device: usb-hub-reset-pm-device {
-		pinconf {
-			pins = "gpio3";
-			function = PMIC_GPIO_FUNC_NORMAL;
-			output-low;
-		};
+		pins = "gpio3";
+		function = PMIC_GPIO_FUNC_NORMAL;
+
+		output-low;
 	};
 
 	usb_sw_sel_pm: usb-sw-sel-pm {
-		pinconf {
-			pins = "gpio4";
-			function = PMIC_GPIO_FUNC_NORMAL;
-			power-source = <PM8916_GPIO_VPH>;
-			input-disable;
-			output-high;
-		};
+		pins = "gpio4";
+		function = PMIC_GPIO_FUNC_NORMAL;
+
+		power-source = <PM8916_GPIO_VPH>;
+		input-disable;
+		output-high;
 	};
 
 	usb_sw_sel_pm_device: usb-sw-sel-pm-device {
-		pinconf {
-			pins = "gpio4";
-			function = PMIC_GPIO_FUNC_NORMAL;
-			power-source = <PM8916_GPIO_VPH>;
-			input-disable;
-			output-low;
-		};
+		pins = "gpio4";
+		function = PMIC_GPIO_FUNC_NORMAL;
+
+		power-source = <PM8916_GPIO_VPH>;
+		input-disable;
+		output-low;
 	};
 
 	pm8916_gpios_leds: pm8916-gpios-leds {
-		pinconf {
-			pins = "gpio1", "gpio2";
-			function = PMIC_GPIO_FUNC_NORMAL;
-			output-low;
-		};
+		pins = "gpio1", "gpio2";
+		function = PMIC_GPIO_FUNC_NORMAL;
+
+		output-low;
 	};
 };
 
@@ -915,19 +901,17 @@
 	pinctrl-0 = <&ls_exp_gpio_f>;
 
 	ls_exp_gpio_f: pm8916-mpp4 {
-		pinconf {
-			pins = "mpp4";
-			function = "digital";
-			output-low;
-			power-source = <PM8916_MPP_L5>;	// 1.8V
-		};
+		pins = "mpp4";
+		function = "digital";
+
+		output-low;
+		power-source = <PM8916_MPP_L5>;	// 1.8V
 	};
 
 	pm8916_mpps_leds: pm8916-mpps-leds {
-		pinconf {
-			pins = "mpp2", "mpp3";
-			function = "digital";
-			output-low;
-		};
+		pins = "mpp2", "mpp3";
+		function = "digital";
+
+		output-low;
 	};
 };
diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
index 6754cb0638f4..f4a76162ab5f 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
@@ -82,3 +82,31 @@
 		nand-bus-width = <8>;
 	};
 };
+
+&sdhc_1 {
+	status = "ok";
+};
+
+&qusb_phy_0 {
+	status = "ok";
+};
+
+&qusb_phy_1 {
+	status = "ok";
+};
+
+&ssphy_0 {
+	status = "ok";
+};
+
+&ssphy_1 {
+	status = "ok";
+};
+
+&usb_0 {
+	status = "ok";
+};
+
+&usb_1 {
+	status = "ok";
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index 5303821300b4..96a5ec89b5f0 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -82,6 +82,91 @@
 		ranges = <0 0 0 0xffffffff>;
 		compatible = "simple-bus";
 
+		ssphy_1: phy@58000 {
+			compatible = "qcom,ipq8074-qmp-usb3-phy";
+			reg = <0x00058000 0x1c4>;
+			#clock-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_USB1_AUX_CLK>,
+				<&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
+				<&xo>;
+			clock-names = "aux", "cfg_ahb", "ref";
+
+			resets =  <&gcc GCC_USB1_PHY_BCR>,
+				<&gcc GCC_USB3PHY_1_PHY_BCR>;
+			reset-names = "phy","common";
+			status = "disabled";
+
+			usb1_ssphy: lane@58200 {
+				reg = <0x00058200 0x130>,       /* Tx */
+				      <0x00058400 0x200>,     /* Rx */
+				      <0x00058800 0x1f8>,     /* PCS  */
+				      <0x00058600 0x044>;     /* PCS misc*/
+				#phy-cells = <0>;
+				clocks = <&gcc GCC_USB1_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "gcc_usb1_pipe_clk_src";
+			};
+		};
+
+		qusb_phy_1: phy@59000 {
+			compatible = "qcom,ipq8074-qusb2-phy";
+			reg = <0x00059000 0x180>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
+				 <&xo>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2_1_PHY_BCR>;
+			status = "disabled";
+		};
+
+		ssphy_0: phy@78000 {
+			compatible = "qcom,ipq8074-qmp-usb3-phy";
+			reg = <0x00078000 0x1c4>;
+			#clock-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_USB0_AUX_CLK>,
+				<&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+				<&xo>;
+			clock-names = "aux", "cfg_ahb", "ref";
+
+			resets =  <&gcc GCC_USB0_PHY_BCR>,
+				<&gcc GCC_USB3PHY_0_PHY_BCR>;
+			reset-names = "phy","common";
+			status = "disabled";
+
+			usb0_ssphy: lane@78200 {
+				reg = <0x00078200 0x130>,       /* Tx */
+				      <0x00078400 0x200>,     /* Rx */
+				      <0x00078800 0x1f8>,     /* PCS  */
+				      <0x00078600 0x044>;     /* PCS misc*/
+				#phy-cells = <0>;
+				clocks = <&gcc GCC_USB0_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "gcc_usb0_pipe_clk_src";
+			};
+		};
+
+		qusb_phy_0: phy@79000 {
+			compatible = "qcom,ipq8074-qusb2-phy";
+			reg = <0x00079000 0x180>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+				 <&xo>;
+			clock-names = "cfg_ahb", "ref";
+
+			resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
+		};
+
 		pcie_phy0: phy@86000 {
 			compatible = "qcom,ipq8074-qmp-pcie-phy";
 			reg = <0x00086000 0x1000>;
@@ -169,6 +254,28 @@
 			#reset-cells = <0x1>;
 		};
 
+		sdhc_1: sdhci@7824900 {
+			compatible = "qcom,sdhci-msm-v4";
+			reg = <0x7824900 0x500>, <0x7824000 0x800>;
+			reg-names = "hc_mem", "core_mem";
+
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&xo>,
+				 <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>;
+			clock-names = "xo", "iface", "core";
+			max-frequency = <384000000>;
+			mmc-ddr-1_8v;
+			mmc-hs200-1_8v;
+			mmc-hs400-1_8v;
+			bus-width = <8>;
+
+			status = "disabled";
+		};
+
 		blsp_dma: dma@7884000 {
 			compatible = "qcom,bam-v1.7.0";
 			reg = <0x07884000 0x2b000>;
@@ -294,6 +401,88 @@
 			status = "disabled";
 		};
 
+		usb_0: usb@8af8800 {
+			compatible = "qcom,dwc3";
+			reg = <0x08af8800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
+				<&gcc GCC_USB0_MASTER_CLK>,
+				<&gcc GCC_USB0_SLEEP_CLK>,
+				<&gcc GCC_USB0_MOCK_UTMI_CLK>;
+			clock-names = "sys_noc_axi",
+				"master",
+				"sleep",
+				"mock_utmi";
+
+			assigned-clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
+					  <&gcc GCC_USB0_MASTER_CLK>,
+					  <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+			assigned-clock-rates = <133330000>,
+						<133330000>,
+						<19200000>;
+
+			resets = <&gcc GCC_USB0_BCR>;
+			status = "disabled";
+
+			dwc_0: dwc3@8a00000 {
+				compatible = "snps,dwc3";
+				reg = <0x8a00000 0xcd00>;
+				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&qusb_phy_0>, <&usb0_ssphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+				tx-fifo-resize;
+				snps,is-utmi-l1-suspend;
+				snps,hird-threshold = /bits/ 8 <0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+				dr_mode = "host";
+			};
+		};
+
+		usb_1: usb@8cf8800 {
+			compatible = "qcom,dwc3";
+			reg = <0x08cf8800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_SYS_NOC_USB1_AXI_CLK>,
+				<&gcc GCC_USB1_MASTER_CLK>,
+				<&gcc GCC_USB1_SLEEP_CLK>,
+				<&gcc GCC_USB1_MOCK_UTMI_CLK>;
+			clock-names = "sys_noc_axi",
+				"master",
+				"sleep",
+				"mock_utmi";
+
+			assigned-clocks = <&gcc GCC_SYS_NOC_USB1_AXI_CLK>,
+					  <&gcc GCC_USB1_MASTER_CLK>,
+					  <&gcc GCC_USB1_MOCK_UTMI_CLK>;
+			assigned-clock-rates = <133330000>,
+						<133330000>,
+						<19200000>;
+
+			resets = <&gcc GCC_USB1_BCR>;
+			status = "disabled";
+
+			dwc_1: dwc3@8c00000 {
+				compatible = "snps,dwc3";
+				reg = <0x8c00000 0xcd00>;
+				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&qusb_phy_1>, <&usb1_ssphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+				tx-fifo-resize;
+				snps,is-utmi-l1-suspend;
+				snps,hird-threshold = /bits/ 8 <0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+				dr_mode = "host";
+			};
+		};
+
 		intc: interrupt-controller@b000000 {
 			compatible = "qcom,msm-qgic2";
 			interrupt-controller;
diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
index d5230cb76eb1..9f2c8e94fd26 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
@@ -108,31 +108,6 @@
 	};
 };
 
-&msmgpio {
-	gpio_keys_default: gpio-keys-default {
-		pinmux {
-			function = "gpio";
-			pins = "gpio107";
-		};
-		pinconf {
-			pins = "gpio107";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	usb_vbus_default: usb-vbus-default {
-		pinmux {
-			function = "gpio";
-			pins = "gpio62";
-		};
-		pinconf {
-			pins = "gpio62";
-			bias-pull-up;
-		};
-	};
-};
-
 &spmi_bus {
 	pm8916@0 {
 		pon@800 {
@@ -258,3 +233,20 @@
 		regulator-max-microvolt = <2700000>;
 	};
 };
+
+&msmgpio {
+	gpio_keys_default: gpio-keys-default {
+		pins = "gpio107";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	usb_vbus_default: usb-vbus-default {
+		pins = "gpio62";
+		function = "gpio";
+
+		bias-pull-up;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
index e9c00367f7fd..4dc437f13fa5 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi
@@ -6,74 +6,49 @@
 &msmgpio {
 
 	blsp1_uart1_default: blsp1-uart1-default {
-		pinmux {
-			function = "blsp_uart1";
-			//	TX, RX, CTS_N, RTS_N
-			pins = "gpio0", "gpio1",
-			       "gpio2", "gpio3";
-		};
-		pinconf {
-			pins = "gpio0", "gpio1",
-			       "gpio2", "gpio3";
-			drive-strength = <16>;
-			bias-disable;
-		};
+		//	TX, RX, CTS_N, RTS_N
+		pins = "gpio0", "gpio1", "gpio2", "gpio3";
+		function = "blsp_uart1";
+
+		drive-strength = <16>;
+		bias-disable;
 	};
 
 	blsp1_uart1_sleep: blsp1-uart1-sleep {
-		pinmux {
-			function = "gpio";
-			pins = "gpio0", "gpio1",
-			       "gpio2", "gpio3";
-		};
-		pinconf {
-			pins = "gpio0", "gpio1",
-			       "gpio2", "gpio3";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
+		pins = "gpio0", "gpio1", "gpio2", "gpio3";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-pull-down;
 	};
 
 	blsp1_uart2_default: blsp1-uart2-default {
-		pinmux {
-			function = "blsp_uart2";
-			pins = "gpio4", "gpio5";
-		};
-		pinconf {
-			pins = "gpio4", "gpio5";
-			drive-strength = <16>;
-			bias-disable;
-		};
+		pins = "gpio4", "gpio5";
+		function = "blsp_uart2";
+
+		drive-strength = <16>;
+		bias-disable;
 	};
 
 	blsp1_uart2_sleep: blsp1-uart2-sleep {
-		pinmux {
-			function = "gpio";
-			pins = "gpio4", "gpio5";
-		};
-		pinconf {
-			pins = "gpio4", "gpio5";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
+		pins = "gpio4", "gpio5";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-pull-down;
 	};
 
 	spi1_default: spi1-default {
-		pinmux {
-			function = "blsp_spi1";
-			pins = "gpio0", "gpio1", "gpio3";
-		};
-		pinmux-cs {
-			function = "gpio";
-			pins = "gpio2";
-		};
-		pinconf {
-			pins = "gpio0", "gpio1", "gpio3";
-			drive-strength = <12>;
-			bias-disable;
-		};
-		pinconf-cs {
+		pins = "gpio0", "gpio1", "gpio3";
+		function = "blsp_spi1";
+
+		drive-strength = <12>;
+		bias-disable;
+
+		cs {
 			pins = "gpio2";
+			function = "gpio";
+
 			drive-strength = <16>;
 			bias-disable;
 			output-high;
@@ -81,33 +56,24 @@
 	};
 
 	spi1_sleep: spi1-sleep {
-		pinmux {
-			function = "gpio";
-			pins = "gpio0", "gpio1", "gpio2", "gpio3";
-		};
-		pinconf {
-			pins = "gpio0", "gpio1", "gpio2", "gpio3";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
+		pins = "gpio0", "gpio1", "gpio2", "gpio3";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-pull-down;
 	};
 
 	spi2_default: spi2-default {
-		pinmux {
-			function = "blsp_spi2";
-			pins = "gpio4", "gpio5", "gpio7";
-		};
-		pinmux-cs {
-			function = "gpio";
-			pins = "gpio6";
-		};
-		pinconf {
-			pins = "gpio4", "gpio5", "gpio7";
-			drive-strength = <12>;
-			bias-disable;
-		};
-		pinconf-cs {
+		pins = "gpio4", "gpio5", "gpio7";
+		function = "blsp_spi2";
+
+		drive-strength = <12>;
+		bias-disable;
+
+		cs {
 			pins = "gpio6";
+			function = "gpio";
+
 			drive-strength = <16>;
 			bias-disable;
 			output-high;
@@ -115,33 +81,24 @@
 	};
 
 	spi2_sleep: spi2-sleep {
-		pinmux {
-			function = "gpio";
-			pins = "gpio4", "gpio5", "gpio6", "gpio7";
-		};
-		pinconf {
-			pins = "gpio4", "gpio5", "gpio6", "gpio7";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
+		pins = "gpio4", "gpio5", "gpio6", "gpio7";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-pull-down;
 	};
 
 	spi3_default: spi3-default {
-		pinmux {
-			function = "blsp_spi3";
-			pins = "gpio8", "gpio9", "gpio11";
-		};
-		pinmux-cs {
-			function = "gpio";
-			pins = "gpio10";
-		};
-		pinconf {
-			pins = "gpio8", "gpio9", "gpio11";
-			drive-strength = <12>;
-			bias-disable;
-		};
-		pinconf-cs {
+		pins = "gpio8", "gpio9", "gpio11";
+		function = "blsp_spi3";
+
+		drive-strength = <12>;
+		bias-disable;
+
+		cs {
 			pins = "gpio10";
+			function = "gpio";
+
 			drive-strength = <16>;
 			bias-disable;
 			output-high;
@@ -149,33 +106,24 @@
 	};
 
 	spi3_sleep: spi3-sleep {
-		pinmux {
-			function = "gpio";
-			pins = "gpio8", "gpio9", "gpio10", "gpio11";
-		};
-		pinconf {
-			pins = "gpio8", "gpio9", "gpio10", "gpio11";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
+		pins = "gpio8", "gpio9", "gpio10", "gpio11";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-pull-down;
 	};
 
 	spi4_default: spi4-default {
-		pinmux {
-			function = "blsp_spi4";
-			pins = "gpio12", "gpio13", "gpio15";
-		};
-		pinmux-cs {
-			function = "gpio";
-			pins = "gpio14";
-		};
-		pinconf {
-			pins = "gpio12", "gpio13", "gpio15";
-			drive-strength = <12>;
-			bias-disable;
-		};
-		pinconf-cs {
+		pins = "gpio12", "gpio13", "gpio15";
+		function = "blsp_spi4";
+
+		drive-strength = <12>;
+		bias-disable;
+
+		cs {
 			pins = "gpio14";
+			function = "gpio";
+
 			drive-strength = <16>;
 			bias-disable;
 			output-high;
@@ -183,33 +131,24 @@
 	};
 
 	spi4_sleep: spi4-sleep {
-		pinmux {
-			function = "gpio";
-			pins = "gpio12", "gpio13", "gpio14", "gpio15";
-		};
-		pinconf {
-			pins = "gpio12", "gpio13", "gpio14", "gpio15";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
+		pins = "gpio12", "gpio13", "gpio14", "gpio15";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-pull-down;
 	};
 
 	spi5_default: spi5-default {
-		pinmux {
-			function = "blsp_spi5";
-			pins = "gpio16", "gpio17", "gpio19";
-		};
-		pinmux-cs {
-			function = "gpio";
-			pins = "gpio18";
-		};
-		pinconf {
-			pins = "gpio16", "gpio17", "gpio19";
-			drive-strength = <12>;
-			bias-disable;
-		};
-		pinconf-cs {
+		pins = "gpio16", "gpio17", "gpio19";
+		function = "blsp_spi5";
+
+		drive-strength = <12>;
+		bias-disable;
+
+		cs {
 			pins = "gpio18";
+			function = "gpio";
+
 			drive-strength = <16>;
 			bias-disable;
 			output-high;
@@ -217,33 +156,24 @@
 	};
 
 	spi5_sleep: spi5-sleep {
-		pinmux {
-			function = "gpio";
-			pins = "gpio16", "gpio17", "gpio18", "gpio19";
-		};
-		pinconf {
-			pins = "gpio16", "gpio17", "gpio18", "gpio19";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
+		pins = "gpio16", "gpio17", "gpio18", "gpio19";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-pull-down;
 	};
 
 	spi6_default: spi6-default {
-		pinmux {
-			function = "blsp_spi6";
-			pins = "gpio20", "gpio21", "gpio23";
-		};
-		pinmux-cs {
-			function = "gpio";
-			pins = "gpio22";
-		};
-		pinconf {
-			pins = "gpio20", "gpio21", "gpio23";
-			drive-strength = <12>;
-			bias-disable;
-		};
-		pinconf-cs {
+		pins = "gpio20", "gpio21", "gpio23";
+		function = "blsp_spi6";
+
+		drive-strength = <12>;
+		bias-disable;
+
+		cs {
 			pins = "gpio22";
+			function = "gpio";
+
 			drive-strength = <16>;
 			bias-disable;
 			output-high;
@@ -251,466 +181,315 @@
 	};
 
 	spi6_sleep: spi6-sleep {
-		pinmux {
-			function = "gpio";
-			pins = "gpio20", "gpio21", "gpio22", "gpio23";
-		};
-		pinconf {
-			pins = "gpio20", "gpio21", "gpio22", "gpio23";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
+		pins = "gpio20", "gpio21", "gpio22", "gpio23";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-pull-down;
 	};
 
 	i2c1_default: i2c1-default {
-		pinmux {
-			function = "blsp_i2c1";
-			pins = "gpio2", "gpio3";
-		};
-		pinconf {
-			pins = "gpio2", "gpio3";
-			drive-strength = <2>;
-			bias-disable;
-		};
+		pins = "gpio2", "gpio3";
+		function = "blsp_i2c1";
+
+		drive-strength = <2>;
+		bias-disable;
 	};
 
 	i2c1_sleep: i2c1-sleep {
-		pinmux {
-			function = "gpio";
-			pins = "gpio2", "gpio3";
-		};
-		pinconf {
-			pins = "gpio2", "gpio3";
-			drive-strength = <2>;
-			bias-disable;
-		};
+		pins = "gpio2", "gpio3";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
 	};
 
 	i2c2_default: i2c2-default {
-		pinmux {
-			function = "blsp_i2c2";
-			pins = "gpio6", "gpio7";
-		};
-		pinconf {
-			pins = "gpio6", "gpio7";
-			drive-strength = <16>;
-			bias-disable;
-		};
+		pins = "gpio6", "gpio7";
+		function = "blsp_i2c2";
+
+		drive-strength = <2>;
+		bias-disable;
 	};
 
 	i2c2_sleep: i2c2-sleep {
-		pinmux {
-			function = "gpio";
-			pins = "gpio6", "gpio7";
-		};
-		pinconf {
-			pins = "gpio6", "gpio7";
-			drive-strength = <2>;
-			bias-disable;
-		};
+		pins = "gpio6", "gpio7";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
 	};
 
 	i2c4_default: i2c4-default {
-		pinmux {
-			function = "blsp_i2c4";
-			pins = "gpio14", "gpio15";
-		};
-		pinconf {
-			pins = "gpio14", "gpio15";
-			drive-strength = <16>;
-			bias-disable;
-		};
+		pins = "gpio14", "gpio15";
+		function = "blsp_i2c4";
+
+		drive-strength = <2>;
+		bias-disable;
 	};
 
 	i2c4_sleep: i2c4-sleep {
-		pinmux {
-			function = "gpio";
-			pins = "gpio14", "gpio15";
-		};
-		pinconf {
-			pins = "gpio14", "gpio15";
-			drive-strength = <2>;
-			bias-disable;
-		};
+		pins = "gpio14", "gpio15";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
 	};
 
 	i2c5_default: i2c5-default {
-		pinmux {
-			function = "blsp_i2c5";
-			pins = "gpio18", "gpio19";
-		};
-		pinconf {
-			pins = "gpio18", "gpio19";
-			drive-strength = <2>;
-			bias-disable;
-		};
+		pins = "gpio18", "gpio19";
+		function = "blsp_i2c5";
+
+		drive-strength = <2>;
+		bias-disable;
 	};
 
 	i2c5_sleep: i2c5-sleep {
-		pinmux {
-			function = "gpio";
-			pins = "gpio18", "gpio19";
-		};
-		pinconf {
-			pins = "gpio18", "gpio19";
-			drive-strength = <2>;
-			bias-disable;
-		};
+		pins = "gpio18", "gpio19";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
 	};
 
 	i2c6_default: i2c6-default {
-		pinmux {
-			function = "blsp_i2c6";
-			pins = "gpio22", "gpio23";
-		};
-		pinconf {
-			pins = "gpio22", "gpio23";
-			drive-strength = <16>;
-			bias-disable;
-		};
+		pins = "gpio22", "gpio23";
+		function = "blsp_i2c6";
+
+		drive-strength = <2>;
+		bias-disable;
 	};
 
 	i2c6_sleep: i2c6-sleep {
-		pinmux {
-			function = "gpio";
-			pins = "gpio22", "gpio23";
-		};
-		pinconf {
-			pins = "gpio22", "gpio23";
-			drive-strength = <2>;
-			bias-disable;
-		};
+		pins = "gpio22", "gpio23";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
 	};
 
 	pmx-sdc1-clk {
 		sdc1_clk_on: clk-on {
-			pinmux {
-				pins = "sdc1_clk";
-			};
-			pinconf {
-				pins = "sdc1_clk";
-				bias-disable;
-				drive-strength = <16>;
-			};
+			pins = "sdc1_clk";
+
+			bias-disable;
+			drive-strength = <16>;
 		};
 		sdc1_clk_off: clk-off {
-			pinmux {
-				pins = "sdc1_clk";
-			};
-			pinconf {
-				pins = "sdc1_clk";
-				bias-disable;
-				drive-strength = <2>;
-			};
+			pins = "sdc1_clk";
+
+			bias-disable;
+			drive-strength = <2>;
 		};
 	};
 
 	pmx-sdc1-cmd {
 		sdc1_cmd_on: cmd-on {
-			pinmux {
-				pins = "sdc1_cmd";
-			};
-			pinconf {
-				pins = "sdc1_cmd";
-				bias-pull-up;
-				drive-strength = <10>;
-			};
+			pins = "sdc1_cmd";
+
+			bias-pull-up;
+			drive-strength = <10>;
 		};
 		sdc1_cmd_off: cmd-off {
-			pinmux {
-				pins = "sdc1_cmd";
-			};
-			pinconf {
-				pins = "sdc1_cmd";
-				bias-pull-up;
-				drive-strength = <2>;
-			};
+			pins = "sdc1_cmd";
+
+			bias-pull-up;
+			drive-strength = <2>;
 		};
 	};
 
 	pmx-sdc1-data {
 		sdc1_data_on: data-on {
-			pinmux {
-				pins = "sdc1_data";
-			};
-			pinconf {
-				pins = "sdc1_data";
-				bias-pull-up;
-				drive-strength = <10>;
-			};
+			pins = "sdc1_data";
+
+			bias-pull-up;
+			drive-strength = <10>;
 		};
 		sdc1_data_off: data-off {
-			pinmux {
-				pins = "sdc1_data";
-			};
-			pinconf {
-				pins = "sdc1_data";
-				bias-pull-up;
-				drive-strength = <2>;
-			};
+			pins = "sdc1_data";
+
+			bias-pull-up;
+			drive-strength = <2>;
 		};
 	};
 
 	pmx-sdc2-clk {
 		sdc2_clk_on: clk-on {
-			pinmux {
-				pins = "sdc2_clk";
-			};
-			pinconf {
-				pins = "sdc2_clk";
-				bias-disable;
-				drive-strength = <16>;
-			};
+			pins = "sdc2_clk";
+
+			bias-disable;
+			drive-strength = <16>;
 		};
 		sdc2_clk_off: clk-off {
-			pinmux {
-				pins = "sdc2_clk";
-			};
-			pinconf {
-				pins = "sdc2_clk";
-				bias-disable;
-				drive-strength = <2>;
-			};
+			pins = "sdc2_clk";
+
+			bias-disable;
+			drive-strength = <2>;
 		};
 	};
 
 	pmx-sdc2-cmd {
 		sdc2_cmd_on: cmd-on {
-			pinmux {
-				pins = "sdc2_cmd";
-			};
-			pinconf {
-				pins = "sdc2_cmd";
-				bias-pull-up;
-				drive-strength = <10>;
-			};
+			pins = "sdc2_cmd";
+
+			bias-pull-up;
+			drive-strength = <10>;
 		};
 		sdc2_cmd_off: cmd-off {
-			pinmux {
-				pins = "sdc2_cmd";
-			};
-			pinconf {
-				pins = "sdc2_cmd";
-				bias-pull-up;
-				drive-strength = <2>;
-			};
+			pins = "sdc2_cmd";
+
+			bias-pull-up;
+			drive-strength = <2>;
 		};
 	};
 
 	pmx-sdc2-data {
 		sdc2_data_on: data-on {
-			pinmux {
-				pins = "sdc2_data";
-			};
-			pinconf {
-				pins = "sdc2_data";
-				bias-pull-up;
-				drive-strength = <10>;
-			};
+			pins = "sdc2_data";
+
+			bias-pull-up;
+			drive-strength = <10>;
 		};
 		sdc2_data_off: data-off {
-			pinmux {
-				pins = "sdc2_data";
-			};
-			pinconf {
-				pins = "sdc2_data";
-				bias-pull-up;
-				drive-strength = <2>;
-			};
+			pins = "sdc2_data";
+
+			bias-pull-up;
+			drive-strength = <2>;
 		};
 	};
 
 	pmx-sdc2-cd-pin {
 		sdc2_cd_on: cd-on {
-			pinmux {
-				function = "gpio";
-				pins = "gpio38";
-			};
-			pinconf {
-				pins = "gpio38";
-				drive-strength = <2>;
-				bias-pull-up;
-			};
+			pins = "gpio38";
+			function = "gpio";
+
+			drive-strength = <2>;
+			bias-pull-up;
 		};
 		sdc2_cd_off: cd-off {
-			pinmux {
-				function = "gpio";
-				pins = "gpio38";
-			};
-			pinconf {
-				pins = "gpio38";
-				drive-strength = <2>;
-				bias-disable;
-			};
+			pins = "gpio38";
+			function = "gpio";
+
+			drive-strength = <2>;
+			bias-disable;
 		};
 	};
 
 	cdc-pdm-lines {
 		cdc_pdm_lines_act: pdm-lines-on {
-			pinmux {
-				function = "cdc_pdm0";
-				pins = "gpio63", "gpio64", "gpio65", "gpio66",
-				       "gpio67", "gpio68";
-			};
-			pinconf {
-				pins = "gpio63", "gpio64", "gpio65", "gpio66",
-				       "gpio67", "gpio68";
-				drive-strength = <8>;
-				bias-pull-none;
-			};
+			pins = "gpio63", "gpio64", "gpio65", "gpio66",
+			       "gpio67", "gpio68";
+			function = "cdc_pdm0";
+
+			drive-strength = <8>;
+			bias-disable;
 		};
 		cdc_pdm_lines_sus: pdm-lines-off {
-			pinmux {
-				function = "cdc_pdm0";
-				pins = "gpio63", "gpio64", "gpio65", "gpio66",
-				       "gpio67", "gpio68";
-			};
-			pinconf {
-				pins = "gpio63", "gpio64", "gpio65", "gpio66",
-				       "gpio67", "gpio68";
-				drive-strength = <2>;
-				bias-disable;
-			};
+			pins = "gpio63", "gpio64", "gpio65", "gpio66",
+			       "gpio67", "gpio68";
+			function = "cdc_pdm0";
+
+			drive-strength = <2>;
+			bias-pull-down;
 		};
 	};
 
 	ext-pri-tlmm-lines {
 		ext_pri_tlmm_lines_act: ext-pa-on {
-			pinmux {
-				function = "pri_mi2s";
-				pins = "gpio113", "gpio114", "gpio115",
-				       "gpio116";
-			};
-			pinconf {
-				pins = "gpio113", "gpio114", "gpio115",
-				       "gpio116";
-				drive-strength = <8>;
-				bias-pull-none;
-			};
-		};
+			pins = "gpio113", "gpio114", "gpio115", "gpio116";
+			function = "pri_mi2s";
 
+			drive-strength = <8>;
+			bias-disable;
+		};
 		ext_pri_tlmm_lines_sus: ext-pa-off {
-			pinmux {
-				function = "pri_mi2s";
-				pins = "gpio113", "gpio114", "gpio115",
-				       "gpio116";
-			};
-			pinconf {
-				pins = "gpio113", "gpio114", "gpio115",
-				       "gpio116";
-				drive-strength = <2>;
-				bias-disable;
-			};
+			pins = "gpio113", "gpio114", "gpio115", "gpio116";
+			function = "pri_mi2s";
+
+			drive-strength = <2>;
+			bias-disable;
 		};
 	};
 
 	ext-pri-ws-line {
 		ext_pri_ws_act: ext-pa-on {
-			pinmux {
-				function = "pri_mi2s_ws";
-				pins = "gpio110";
-			};
-			pinconf {
-				pins = "gpio110";
-				drive-strength = <8>;
-				bias-pull-none;
-			};
-		};
+			pins = "gpio110";
+			function = "pri_mi2s_ws";
 
+			drive-strength = <8>;
+			bias-disable;
+		};
 		ext_pri_ws_sus: ext-pa-off {
-			pinmux {
-				function = "pri_mi2s_ws";
-				pins = "gpio110";
-			};
-			pinconf {
-				pins = "gpio110";
-				drive-strength = <2>;
-				bias-disable;
-			};
+			pins = "gpio110";
+			function = "pri_mi2s_ws";
+
+			drive-strength = <2>;
+			bias-disable;
 		};
 	};
 
 	ext-mclk-tlmm-lines {
 		ext_mclk_tlmm_lines_act: mclk-lines-on {
-			pinmux {
-				function = "pri_mi2s";
-				pins = "gpio116";
-			};
-			pinconf {
-				pins = "gpio116";
-				drive-strength = <8>;
-				bias-pull-none;
-			};
+			pins = "gpio116";
+			function = "pri_mi2s";
+
+			drive-strength = <8>;
+			bias-disable;
 		};
 		ext_mclk_tlmm_lines_sus: mclk-lines-off {
-			pinmux {
-				function = "pri_mi2s";
-				pins = "gpio116";
-			};
-			pinconf {
-				pins = "gpio116";
-				drive-strength = <2>;
-				bias-disable;
-			};
+			pins = "gpio116";
+			function = "pri_mi2s";
+
+			drive-strength = <2>;
+			bias-disable;
 		};
 	};
 
 	/* secondary Mi2S */
 	ext-sec-tlmm-lines {
 		ext_sec_tlmm_lines_act: tlmm-lines-on {
-			pinmux {
-				function = "sec_mi2s";
-				pins = "gpio112", "gpio117", "gpio118",
-				       "gpio119";
-			};
-			pinconf {
-				pins = "gpio112", "gpio117", "gpio118",
-					"gpio119";
-				drive-strength = <8>;
-				bias-pull-none;
-			};
+			pins = "gpio112", "gpio117", "gpio118", "gpio119";
+			function = "sec_mi2s";
+
+			drive-strength = <8>;
+			bias-disable;
 		};
 		ext_sec_tlmm_lines_sus: tlmm-lines-off {
-			pinmux {
-				function = "sec_mi2s";
-				pins = "gpio112", "gpio117", "gpio118",
-				       "gpio119";
-			};
-			pinconf {
-				pins = "gpio112", "gpio117", "gpio118",
-					"gpio119";
-				drive-strength = <2>;
-				bias-disable;
-			};
+			pins = "gpio112", "gpio117", "gpio118", "gpio119";
+			function = "sec_mi2s";
+
+			drive-strength = <2>;
+			bias-disable;
 		};
 	};
 
 	cdc-dmic-lines {
 		cdc_dmic_lines_act: dmic-lines-on {
-			pinmux-dmic0-clk {
-				function = "dmic0_clk";
+			clk {
 				pins = "gpio0";
+				function = "dmic0_clk";
+
+				drive-strength = <8>;
 			};
-			pinmux-dmic0-data {
-				function = "dmic0_data";
+			data {
 				pins = "gpio1";
-			};
-			pinconf {
-				pins = "gpio0", "gpio1";
+				function = "dmic0_data";
+
 				drive-strength = <8>;
 			};
 		};
 		cdc_dmic_lines_sus: dmic-lines-off {
-			pinmux-dmic0-clk {
-				function = "dmic0_clk";
+			clk {
 				pins = "gpio0";
+				function = "dmic0_clk";
+
+				drive-strength = <2>;
+				bias-disable;
 			};
-			pinmux-dmic0-data {
-				function = "dmic0_data";
+			data {
 				pins = "gpio1";
-			};
-			pinconf {
-				pins = "gpio0", "gpio1";
+				function = "dmic0_data";
+
 				drive-strength = <2>;
 				bias-disable;
 			};
@@ -718,88 +497,64 @@
 	};
 
 	wcnss_pin_a: wcnss-active {
-		pinmux {
-			pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44";
-			function = "wcss_wlan";
-		};
-		pinconf {
-			pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44";
-			drive-strength = <6>;
-			bias-pull-up;
-		};
+		pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44";
+		function = "wcss_wlan";
+
+		drive-strength = <6>;
+		bias-pull-up;
 	};
 
 	cci0_default: cci0-default {
-		pinmux {
-			function = "cci_i2c";
-			pins = "gpio29", "gpio30";
-		};
-		pinconf {
-			pins = "gpio29", "gpio30";
-			drive-strength = <16>;
-			bias-disable;
-		};
+		pins = "gpio29", "gpio30";
+		function = "cci_i2c";
+
+		drive-strength = <16>;
+		bias-disable;
 	};
 
 	camera_front_default: camera-front-default {
-		pinmux-pwdn {
-			function = "gpio";
-			pins = "gpio33";
-		};
-		pinconf-pwdn {
+		pwdn {
 			pins = "gpio33";
+			function = "gpio";
+
 			drive-strength = <16>;
 			bias-disable;
 		};
-
-		pinmux-rst {
-			function = "gpio";
-			pins = "gpio28";
-		};
-		pinconf-rst {
+		rst {
 			pins = "gpio28";
+			function = "gpio";
+
 			drive-strength = <16>;
 			bias-disable;
 		};
-
-		pinmux-mclk1 {
-			function = "cam_mclk1";
-			pins = "gpio27";
-		};
-		pinconf-mclk1 {
+		mclk1 {
 			pins = "gpio27";
+			function = "cam_mclk1";
+
 			drive-strength = <16>;
 			bias-disable;
 		};
 	};
 
 	camera_rear_default: camera-rear-default {
-		pinmux-pwdn {
-			function = "gpio";
-			pins = "gpio34";
-		};
-		pinconf-pwdn {
+		pwdn {
 			pins = "gpio34";
+			function = "gpio";
+
 			drive-strength = <16>;
 			bias-disable;
 		};
-
-		pinmux-rst {
-			function = "gpio";
-			pins = "gpio35";
-		};
-		pinconf-rst {
+		rst {
 			pins = "gpio35";
+			function = "gpio";
+
 			drive-strength = <16>;
 			bias-disable;
 		};
-
-		pinmux-mclk0 {
-			function = "cam_mclk0";
-			pins = "gpio26";
-		};
-		pinconf-mclk0 {
+		mclk0 {
 			pins = "gpio26";
+			function = "cam_mclk0";
+
 			drive-strength = <16>;
 			bias-disable;
 		};
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
index ea52adf07a4b..a0c00d9d62c4 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a2015-common.dtsi
@@ -167,77 +167,33 @@
 	};
 };
 
-&msmgpio {
-	gpio_keys_default: gpio-keys-default {
-		pinmux {
-			function = "gpio";
-			pins = "gpio107", "gpio109";
-		};
-		pinconf {
-			pins = "gpio107", "gpio109";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
+&blsp_i2c2 {
+	status = "okay";
 
-	gpio_hall_sensor_default: gpio-hall-sensor-default {
-		pinmux {
-			function = "gpio";
-			pins = "gpio52";
-		};
-		pinconf {
-			pins = "gpio52";
-			drive-strength = <2>;
-			bias-disable;
-		};
-	};
+	accelerometer: accelerometer@10 {
+		compatible = "bosch,bmc150_accel";
+		reg = <0x10>;
+		interrupt-parent = <&msmgpio>;
+		interrupts = <115 IRQ_TYPE_EDGE_RISING>;
 
-	muic_int_default: muic-int-default {
-		pinmux {
-			function = "gpio";
-			pins = "gpio12";
-		};
-		pinconf {
-			pins = "gpio12";
-			drive-strength = <2>;
-			bias-disable;
-		};
+		pinctrl-names = "default";
+		pinctrl-0 = <&accel_int_default>;
 	};
 
-	tsp_en_default: tsp-en-default {
-		pinmux {
-			function = "gpio";
-			pins = "gpio73";
-		};
-		pinconf {
-			pins = "gpio73";
-			drive-strength = <2>;
-			bias-disable;
-		};
+	magnetometer@12 {
+		compatible = "bosch,bmc150_magn";
+		reg = <0x12>;
 	};
+};
 
-	pmx-mdss {
-		mdss_default: mdss-default {
-			pinmux {
-				function = "gpio";
-				pins = "gpio25";
-			};
-			pinconf {
-				pins = "gpio25";
-				drive-strength = <8>;
-				bias-disable;
-			};
-		};
-
-		mdss_sleep: mdss-sleep {
-			pinmux {
-				function = "gpio";
-				pins = "gpio25";
-			};
-			pinconf {
-				pins = "gpio25";
-				drive-strength = <2>;
-				bias-pull-down;
+&spmi_bus {
+	pm8916@0 {
+		pon@800 {
+			volume-down {
+				compatible = "qcom,pm8941-resin";
+				interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+				bias-pull-up;
+				linux,code = <KEY_VOLUMEDOWN>;
 			};
 		};
 	};
@@ -356,15 +312,61 @@
 	};
 };
 
-&spmi_bus {
-	pm8916@0 {
-		pon@800 {
-			volume-down {
-				compatible = "qcom,pm8941-resin";
-				interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
-				bias-pull-up;
-				linux,code = <KEY_VOLUMEDOWN>;
-			};
+&msmgpio {
+	accel_int_default: accel-int-default {
+		pins = "gpio115";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	gpio_keys_default: gpio-keys-default {
+		pins = "gpio107", "gpio109";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	gpio_hall_sensor_default: gpio-hall-sensor-default {
+		pins = "gpio52";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	mdss {
+		mdss_default: mdss-default {
+			pins = "gpio25";
+			function = "gpio";
+
+			drive-strength = <8>;
+			bias-disable;
+		};
+		mdss_sleep: mdss-sleep {
+			pins = "gpio25";
+			function = "gpio";
+
+			drive-strength = <2>;
+			bias-pull-down;
 		};
 	};
+
+	muic_int_default: muic-int-default {
+		pins = "gpio12";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tsp_en_default: tsp-en-default {
+		pins = "gpio73";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
 };
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
index b46c87289033..410c7d199f96 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
@@ -22,6 +22,12 @@
 	};
 };
 
+&accelerometer {
+	mount-matrix = "0", "1", "0",
+		       "1", "0", "0",
+		       "0", "0", "1";
+};
+
 &dsi0 {
 	panel@0 {
 		reg = <0>;
@@ -51,14 +57,10 @@
 
 &msmgpio {
 	panel_vdd3_default: panel-vdd3-default {
-		pinmux {
-			function = "gpio";
-			pins = "gpio9";
-		};
-		pinconf {
-			pins = "gpio9";
-			drive-strength = <2>;
-			bias-disable;
-		};
+		pins = "gpio9";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
 	};
 };
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts
index a555db8f6b34..e39c04d977c2 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts
@@ -9,6 +9,12 @@
 	compatible = "samsung,a5u-eur", "qcom,msm8916";
 };
 
+&accelerometer {
+	mount-matrix = "-1", "0", "0",
+			"0", "1", "0",
+			"0", "0", "1";
+};
+
 &blsp_i2c5 {
 	status = "okay";
 
@@ -38,14 +44,10 @@
 
 &msmgpio {
 	ts_int_default: ts-int-default {
-		pinmux {
-			function = "gpio";
-			pins = "gpio13";
-		};
-		pinconf {
-			pins = "gpio13";
-			drive-strength = <2>;
-			bias-disable;
-		};
+		pins = "gpio13";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
 	};
 };
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 32bd140ac9fd..67cae5f9e47e 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include <dt-bindings/arm/coresight-cti-dt.h>
+#include <dt-bindings/interconnect/qcom,msm8916.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-msm8916.h>
 #include <dt-bindings/reset/qcom,gcc-msm8916.h>
@@ -406,11 +407,38 @@
 		ranges = <0 0 0 0xffffffff>;
 		compatible = "simple-bus";
 
+		bimc: interconnect@400000 {
+			compatible = "qcom,msm8916-bimc";
+			reg = <0x00400000 0x62000>;
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+				 <&rpmcc RPM_SMD_BIMC_A_CLK>;
+		};
+
 		restart@4ab000 {
 			compatible = "qcom,pshold";
 			reg = <0x4ab000 0x4>;
 		};
 
+		pcnoc: interconnect@500000 {
+			compatible = "qcom,msm8916-pcnoc";
+			reg = <0x00500000 0x11000>;
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
+				 <&rpmcc RPM_SMD_PCNOC_A_CLK>;
+		};
+
+		snoc: interconnect@580000 {
+			compatible = "qcom,msm8916-snoc";
+			reg = <0x00580000 0x14000>;
+			#interconnect-cells = <1>;
+			clock-names = "bus", "bus_a";
+			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
+				 <&rpmcc RPM_SMD_SNOC_A_CLK>;
+		};
+
 		msmgpio: pinctrl@1000000 {
 			compatible = "qcom,msm8916-pinctrl";
 			reg = <0x1000000 0x300000>;
@@ -700,6 +728,9 @@
 			interrupt-names = "lpass-irq-lpaif";
 			reg = <0x07708000 0x10000>;
 			reg-names = "lpass-lpaif";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
                 lpass_codec: codec{
diff --git a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
index 32670d5afdd6..5969b5cfdc85 100644
--- a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
+++ b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
@@ -11,6 +11,7 @@
 	model = "LG Nexus 5X";
 	compatible = "lg,bullhead", "qcom,msm8992";
 	/* required for bootloader to select correct board */
+	qcom,msm-id = <251 0>, <252 0>;
 	qcom,board-id = <0xb64 0>;
 	qcom,pmic-id = <0x10009 0x1000A 0x0 0x0>;
 
@@ -22,15 +23,6 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	soc {
-		serial@f991e000 {
-			status = "okay";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp1_uart2_default>;
-			pinctrl-1 = <&blsp1_uart2_sleep>;
-		};
-	};
-
 	reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -47,4 +39,237 @@
 	};
 };
 
-#include "msm8994-smd-rpm.dtsi"
+&blsp1_uart2 {
+	status = "okay";
+};
+
+&rpm_requests {
+	pm8994-regulators {
+		compatible = "qcom,rpm-pm8994-regulators";
+
+		vdd_l1-supply = <&pm8994_s1>;
+		vdd_l2_26_28-supply = <&pm8994_s3>;
+		vdd_l3_11-supply = <&pm8994_s3>;
+		vdd_l4_27_31-supply = <&pm8994_s3>;
+		vdd_l5_7-supply = <&pm8994_s3>;
+		vdd_l6_12_32-supply = <&pm8994_s5>;
+		vdd_l8_16_30-supply = <&vreg_vph_pwr>;
+		vdd_l9_10_18_22-supply = <&vreg_vph_pwr>;
+		vdd_l13_19_23_24-supply = <&vreg_vph_pwr>;
+		vdd_l14_15-supply = <&pm8994_s5>;
+		vdd_l17_29-supply = <&vreg_vph_pwr>;
+		vdd_l20_21-supply = <&vreg_vph_pwr>;
+		vdd_l25-supply = <&pm8994_s5>;
+		vdd_lvs1_2 = <&pm8994_s4>;
+
+		pm8994_s1: s1 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		pm8994_s2: s2 {
+			/* TODO */
+		};
+
+		pm8994_s3: s3 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8994_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+			regulator-system-load = <325000>;
+		};
+
+		pm8994_s5: s5 {
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+		};
+
+		pm8994_s7: s7 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm8994_l1: l1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm8994_l2: l2 {
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1250000>;
+		};
+
+		pm8994_l3: l3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8994_l4: l4 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8994_l5: l5 {
+			/* TODO */
+		};
+
+		pm8994_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l7: l7 {
+			/* TODO */
+		};
+
+		pm8994_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l11: l11 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8994_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l13: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8994_l14: l14 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8994_l15: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l16: l16 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8994_l17: l17 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8994_l18: l18 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8994_l19: l19 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l20: l20 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-allow-set-load;
+			regulator-system-load = <570000>;
+		};
+
+		pm8994_l21: l21 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pm8994_l22: l22 {
+			regulator-min-microvolt = <3100000>;
+			regulator-max-microvolt = <3100000>;
+		};
+
+		pm8994_l23: l23 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8994_l24: l24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3150000>;
+		};
+
+		pm8994_l25: l25 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l26: l26 {
+			/* TODO: value from downstream
+			regulator-min-microvolt = <987500>;
+			fails to apply */
+		};
+
+		pm8994_l27: l27 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8994_l28: l28 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm8994_l29: l29 {
+			/* TODO: Unsupported voltage range.
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			qcom,init-voltage = <2800000>;
+			*/
+		};
+
+		pm8994_l30: l30 {
+			/* TODO: get this verified
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,init-voltage = <1800000>;
+			*/
+		};
+
+		pm8994_l31: l31 {
+			regulator-min-microvolt = <1262500>;
+			regulator-max-microvolt = <1262500>;
+		};
+
+		pm8994_l32: l32 {
+			/* TODO: get this verified
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,init-voltage = <1800000>;
+			*/
+		};
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+
+	mmc-hs400-1_8v;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-talkman.dts b/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-talkman.dts
new file mode 100644
index 000000000000..3cc01f02219d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-talkman.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+/dts-v1/;
+
+#include "msm8992.dtsi"
+#include "pm8994.dtsi"
+#include "pmi8994.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+
+/ {
+	model = "Microsoft Lumia 950";
+	compatible = "microsoft,talkman", "qcom,msm8992";
+
+	/* Most Lumia 950 users use GRUB to load their kernels,
+	 * hence there is no need for msm-id and friends.
+	 */
+
+	/* This enables graphical output via bootloader-enabled display.
+	 * acpi=no is required due to WP platforms having ACPI support, but
+	 * only for Windows-based OSes.
+	 */
+	chosen {
+		bootargs = "earlycon=efifb console=efifb acpi=no";
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+
+	mmc-hs200-1_8v;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8992-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8992-pins.dtsi
deleted file mode 100644
index c543c718c22d..000000000000
--- a/arch/arm64/boot/dts/qcom/msm8992-pins.dtsi
+++ /dev/null
@@ -1,90 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
- */
-
-&msmgpio {
-	blsp1_uart2_default: blsp1_uart2_default {
-		pinmux {
-			function = "blsp_uart2";
-			pins = "gpio4", "gpio5";
-		};
-		pinconf {
-			pins = "gpio4", "gpio5";
-			drive-strength = <16>;
-			bias-disable;
-		};
-	};
-
-	blsp1_uart2_sleep: blsp1_uart2_sleep {
-		pinmux {
-			function = "gpio";
-			pins = "gpio4", "gpio5";
-		};
-		pinconf {
-			pins = "gpio4", "gpio5";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
-	};
-
-	/* 0-3 for sdc1 4-6 for sdc2 */
-	/* Order of pins */
-	/* SDC1: CLK -> 0, CMD -> 1, DATA -> 2, RCLK -> 3 */
-	/* SDC2: CLK -> 4, CMD -> 5, DATA -> 6 */
-	sdc1_clk_on: clk-on {
-		pinconf {
-			pins = "sdc1_clk";
-			bias-disable = <0>; /* No pull */
-			drive-strength = <16>; /* 16mA */
-		};
-	};
-
-	sdc1_clk_off: clk-off {
-		pinconf {
-			pins = "sdc1_clk";
-			bias-disable = <0>; /* No pull */
-			drive-strength = <2>; /* 2mA */
-		};
-	};
-
-	sdc1_cmd_on: cmd-on {
-		pinconf {
-			pins = "sdc1_cmd";
-			bias-pull-up;
-			drive-strength = <8>;
-		};
-	};
-
-	sdc1_cmd_off: cmd-off {
-		pinconf {
-			pins = "sdc1_cmd";
-			bias-pull-up = <0x3>; /* same as 3.10 ?? */
-			drive-strength = <2>; /* 2mA */
-		};
-	};
-
-	sdc1_data_on: data-on {
-		pinconf {
-			pins = "sdc1_data";
-			bias-pull-up;
-			drive-strength = <8>; /* 8mA */
-		};
-	};
-
-	sdc1_data_off: data-off {
-		pinconf {
-			pins = "sdc1_data";
-			bias-pull-up;
-			drive-strength = <2>;
-		};
-	};
-
-	sdc1_rclk_on: rclk-on {
-		bias-pull-down; /* pull down */
-	};
-
-	sdc1_rclk_off: rclk-off {
-		bias-pull-down; /* pull down */
-	};
-};
diff --git a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts
new file mode 100644
index 000000000000..4f64ca3ea1ef
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts
@@ -0,0 +1,364 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+/dts-v1/;
+
+#include "msm8992.dtsi"
+#include "pm8994.dtsi"
+#include "pmi8994.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+
+/ {
+	model = "Xiaomi Mi 4C";
+	compatible = "xiaomi,libra", "qcom,msm8992";
+	/* required for bootloader to select correct board */
+	qcom,msm-id = <251 0 252 0>;
+	qcom,pmic-id = <65545 65546 0 0>;
+	qcom,board-id = <12 0>;
+
+	/* This enables graphical output via bootloader-enabled display */
+	chosen {
+		bootargs = "earlycon=tty0 console=tty0";
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer0: framebuffer@3404000 {
+			status= "okay";
+			compatible = "simple-framebuffer";
+			reg = <0 0x3404000 0 (1080 * 1920 * 3)>;
+			width = <1080>;
+			height = <1920>;
+			stride = <(1080 * 3)>;
+			format = "r8g8b8";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		input-name = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+
+		button@0 {
+			label = "Volume Up";
+			gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* This is for getting crash logs using Android downstream kernels */
+		ramoops@dfc00000 {
+			compatible = "ramoops";
+			reg = <0x0 0xdfc00000 0x0 0x40000>;
+			console-size = <0x10000>;
+			record-size = <0x10000>;
+			ftrace-size = <0x10000>;
+			pmsg-size = <0x20000>;
+		};
+
+		continuous_splash: framebuffer@3401000{
+			reg = <0x0 0x3401000 0x0 0x2200000>;
+			no-map;
+		};
+
+		dfps_data_mem: dfps_data_mem@3400000 {
+			reg = <0x0 0x3400000 0x0 0x1000>;
+			no-map;
+		};
+
+		peripheral_region: peripheral_region@7400000 {
+			reg = <0x0 0x7400000 0x0 0x1c00000>;
+			no-map;
+		};
+
+		modem_region: modem_region@9000000 {
+			reg = <0x0 0x9000000 0x0 0x5a00000>;
+			no-map;
+		};
+
+		tzapp: modem_region@ea00000 {
+			reg = <0x0 0xea00000 0x0 0x1900000>;
+			no-map;
+		};
+	};
+};
+
+&blsp_i2c2 {
+	status = "okay";
+
+	/* Atmel or Synaptics touchscreen */
+};
+
+&blsp_i2c5 {
+	status = "okay";
+
+	/* Silabs si4705 FM transmitter */
+};
+
+&blsp_i2c6 {
+	status = "okay";
+
+	/* NCI NFC,
+	 * TI USB320 Type-C controller,
+	 * Pericom 30216a USB (de)mux switch
+	 */
+};
+
+&blsp_i2c7 {
+	status = "okay";
+
+	/* cm36686 proximity and ambient light sensor */
+};
+
+&blsp_i2c13 {
+	status = "okay";
+
+	/* ST lsm6db0 gyro/accelerometer */
+};
+
+&blsp2_uart2 {
+	status = "okay";
+};
+
+&rpm_requests {
+	pm8994-regulators {
+		compatible = "qcom,rpm-pm8994-regulators";
+
+		vdd_l1-supply = <&pm8994_s7>;
+		vdd_l2_26_28-supply = <&pm8994_s3>;
+		vdd_l3_11-supply = <&pm8994_s3>;
+		vdd_l4_27_31-supply = <&pm8994_s3>;
+		vdd_l5_7-supply = <&pm8994_s3>;
+		vdd_l6_12_32-supply = <&pm8994_s5>;
+		vdd_l8_16_30-supply = <&vreg_vph_pwr>;
+		vdd_l9_10_18_22-supply = <&vreg_vph_pwr>;
+		vdd_l13_19_23_24-supply = <&vreg_vph_pwr>;
+		vdd_l14_15-supply = <&pm8994_s5>;
+		vdd_l17_29-supply = <&vreg_vph_pwr>;
+		vdd_l20_21-supply = <&vreg_vph_pwr>;
+		vdd_l25-supply = <&pm8994_s5>;
+		vdd_lvs1_2 = <&pm8994_s4>;
+
+		pm8994_s1: s1 {
+			/* unused */
+			status = "disabled";
+		};
+
+		pm8994_s2: s2 {
+			/* unused */
+			status = "disabled";
+		};
+
+		pm8994_s3: s3 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8994_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+			regulator-always-on;
+			regulator-system-load = <325000>;
+		};
+
+		pm8994_s5: s5 {
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+		};
+
+		pm8994_s7: s7 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm8994_l1: l1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm8994_l2: l2 {
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1250000>;
+		};
+
+		pm8994_l3: l3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8994_l4: l4 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8994_l5: l5 {
+			/* unused */
+			status = "disabled";
+		};
+
+		pm8994_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l7: l7 {
+			/* unused */
+			status = "disabled";
+		};
+
+		pm8994_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l11: l11 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8994_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l13: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8994_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l15: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l16: l16 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8994_l17: l17 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8994_l18: l18 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			regulator-always-on;
+		};
+
+		pm8994_l19: l19 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8994_l20: l20 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-allow-set-load;
+			regulator-system-load = <570000>;
+		};
+
+		pm8994_l21: l21 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-always-on;
+		};
+
+		pm8994_l22: l22 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8994_l23: l23 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8994_l24: l24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3150000>;
+		};
+
+		pm8994_l25: l25 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm8994_l26: l26 {
+			regulator-min-microvolt = <987500>;
+			regulator-max-microvolt = <987500>;
+
+		};
+
+		pm8994_l27: l27 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8994_l28: l28 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm8994_l29: l29 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8994_l30: l30 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l31: l31 {
+			regulator-min-microvolt = <1262500>;
+			regulator-max-microvolt = <1262500>;
+		};
+
+		pm8994_l32: l32 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+
+	mmc-hs400-1_8v;
+	vmmc-supply = <&pm8994_l20>;
+	vqmmc-supply = <&pm8994_s4>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi
index 2021795c99ad..188fff2095f1 100644
--- a/arch/arm64/boot/dts/qcom/msm8992.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi
@@ -6,10 +6,6 @@
 #include <dt-bindings/clock/qcom,gcc-msm8994.h>
 
 / {
-	model = "Qualcomm Technologies, Inc. MSM 8992";
-	compatible = "qcom,msm8992";
-	// msm-id needed by bootloader for selecting correct blob
-	qcom,msm-id = <251 0>, <252 0>;
 	interrupt-parent = <&intc>;
 
 	#address-cells = <2>;
@@ -20,55 +16,139 @@
 	cpus {
 		#address-cells = <2>;
 		#size-cells = <0>;
-		cpu-map {
-			cluster0 {
-				core0 {
-					cpu = <&CPU0>;
-				};
-			};
-		};
 
 		CPU0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x0>;
 			next-level-cache = <&L2_0>;
+			enable-method = "psci";
 			L2_0: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
 			};
 		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CPU4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x100>;
+			next-level-cache = <&L2_1>;
+			enable-method = "psci";
+			L2_1: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+			};
+		};
+
+		CPU5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x101>;
+			next-level-cache = <&L2_1>;
+			enable-method = "psci";
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&CPU4>;
+				};
+
+				core1 {
+					cpu = <&CPU5>;
+				};
+			};
+		};
 	};
 
-	timer {
-		compatible = "arm,armv8-timer";
-		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	clocks {
+		xo_board: xo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+		};
+
+		sleep_clk: sleep_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-msm8994", "qcom,scm";
+		};
 	};
 
-	xo_board: xo_board {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <19200000>;
+	memory {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0 0 0 0>;
 	};
 
-	sleep_clk: sleep_clk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4)| IRQ_TYPE_LEVEL_HIGH)>;
 	};
 
-	vreg_vph_pwr: vreg-vph-pwr {
-		compatible = "regulator-fixed";
-		status = "okay";
-		regulator-name = "vph-pwr";
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "hvc";
+	};
 
-		regulator-min-microvolt = <3600000>;
-		regulator-max-microvolt = <3600000>;
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
 
-		regulator-always-on;
+		smem_region: smem@6a00000 {
+			reg = <0x0 0x6a00000 0x0 0x200000>;
+			no-map;
+		};
 	};
 
 	sfpb_mutex: hwmutex {
@@ -98,9 +178,10 @@
 				<0xf9002000 0x1000>;
 		};
 
-		apcs: syscon@f900d000 {
-			compatible = "syscon";
+		apcs: mailbox@f900d000 {
+			compatible = "qcom,msm8994-apcs-kpss-global", "syscon";
 			reg = <0xf900d000 0x2000>;
+			#mbox-cells = <1>;
 		};
 
 		timer@f9020000 {
@@ -161,63 +242,147 @@
 			};
 		};
 
-		restart@fc4ab000 {
-			compatible = "qcom,pshold";
-			reg = <0xfc4ab000 0x4>;
-		};
+		sdhc_1: sdhci@f9824900 {
+			compatible = "qcom,sdhci-msm-v4";
+			reg = <0xf9824900 0x1a0>, <0xf9824000 0x800>;
+			reg-names = "hc_mem", "core_mem";
 
-		msmgpio: pinctrl@fd510000 {
-			compatible = "qcom,msm8994-pinctrl";
-			reg = <0xfd510000 0x4000>;
-			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			gpio-ranges = <&msmgpio 0 0 146>;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
+				<&gcc GCC_SDCC1_AHB_CLK>,
+				<&xo_board>;
+			clock-names = "core", "iface", "xo";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on
+					&sdc1_rclk_on>;
+			pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off
+					&sdc1_rclk_off>;
+
+			regulator-always-on;
+			bus-width = <8>;
+			non-removable;
+
+			status = "disabled";
 		};
 
 		blsp1_uart2: serial@f991e000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0xf991e000 0x1000>;
 			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_LOW>;
-			status = "disabled";
 			clock-names = "core", "iface";
-			clocks = <&clock_gcc GCC_BLSP1_UART2_APPS_CLK>,
-				<&clock_gcc GCC_BLSP1_AHB_CLK>;
+			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+				<&gcc GCC_BLSP1_AHB_CLK>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_uart2_default>;
+			pinctrl-1 = <&blsp1_uart2_sleep>;
+			status = "disabled";
 		};
 
-		clock_gcc: clock-controller@fc400000 {
-			compatible = "qcom,gcc-msm8994";
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			#power-domain-cells = <1>;
-			reg = <0xfc400000 0x2000>;
+		blsp_i2c2: i2c@f9924000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0xf9924000 0x500>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+				<&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
+			clock-names = "iface", "core";
+			clock-frequency = <400000>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c2_default>;
+			pinctrl-1 = <&i2c2_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
 		};
 
-		sdhci1: mmc@f9824900 {
-			compatible = "qcom,sdhci-msm-v4";
-			reg = <0xf9824900 0x1a0>, <0xf9824000 0x800>;
-			reg-names = "hc_mem", "core_mem";
+		/* Somebody was very creative with their numbering scheme downstream... */
 
-			interrupts = <GIC_SPI 123 IRQ_TYPE_NONE>,
-					<GIC_SPI 138 IRQ_TYPE_NONE>;
-			interrupt-names = "hc_irq", "pwr_irq";
+		blsp_i2c13: i2c@f9927000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0xf9927000 0x500>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+				<&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>;
+			clock-names = "iface", "core";
+			clock-frequency = <400000>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c13_default>;
+			pinctrl-1 = <&i2c13_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c6: i2c@f9928000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0xf9928000 0x500>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+				<&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>;
+			clock-names = "iface", "core";
+			clock-frequency = <400000>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c6_default>;
+			pinctrl-1 = <&i2c6_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
 
-			clocks = <&clock_gcc GCC_SDCC1_APPS_CLK>,
-				<&clock_gcc GCC_SDCC1_AHB_CLK>;
+		blsp2_uart2: serial@f995e000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0xf995e000 0x1000>;
+			interrupt = <GIC_SPI 146 IRQ_TYPE_LEVEL_LOW>;
 			clock-names = "core", "iface";
+			clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>,
+				<&gcc GCC_BLSP2_AHB_CLK>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_uart2_default>;
+			pinctrl-1 = <&blsp2_uart2_sleep>;
+			status = "disabled";
+		};
 
+		blsp_i2c7: i2c@f9963000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0xf9963000 0x500>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>,
+				<&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>;
+			clock-names = "iface", "core";
+			clock-frequency = <400000>;
 			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on
-					&sdc1_rclk_on>;
-			pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off
-					&sdc1_rclk_off>;
+			pinctrl-0 = <&i2c7_default>;
+			pinctrl-1 = <&i2c7_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
 
-			regulator-always-on;
-			bus-width = <8>;
-			mmc-hs400-1_8v;
-			status = "okay";
+		blsp_i2c5: i2c@f9967000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0xf9967000 0x500>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>,
+				<&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>;
+			clock-names = "iface", "core";
+			clock-frequency = <100000>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c5_default>;
+			pinctrl-1 = <&i2c5_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		gcc: clock-controller@fc400000 {
+			compatible = "qcom,gcc-msm8994";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			reg = <0xfc400000 0x2000>;
 		};
 
 		rpm_msg_ram: memory@fc428000 {
@@ -225,27 +390,189 @@
 			reg = <0xfc428000 0x4000>;
 		};
 
+		restart@fc4ab000 {
+			compatible = "qcom,pshold";
+			reg = <0xfc4ab000 0x4>;
+		};
+
+		spmi_bus: spmi@fc4c0000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0xfc4cf000 0x1000>,
+			      <0xfc4cb000 0x1000>,
+			      <0xfc4ca000 0x1000>;
+			reg-names = "core", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
+
 		sfpb_mutex_regs: syscon@fd484000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "syscon";
 			reg = <0xfd484000 0x400>;
 		};
-	};
 
-	memory {
-		device_type = "memory";
-		reg = <0 0 0 0>; // bootloader will update
-	};
+		tlmm: pinctrl@fd510000 {
+			compatible = "qcom,msm8994-pinctrl";
+			reg = <0xfd510000 0x4000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 146>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
+			blsp1_uart2_default: blsp1-uart2-default {
+				function = "blsp_uart2";
+				pins = "gpio4", "gpio5";
+				drive-strength = <16>;
+				bias-disable;
+			};
 
-		smem_region: smem@6a00000 {
-			reg = <0x0 0x6a00000 0x0 0x200000>;
-			no-map;
+			blsp1_uart2_sleep: blsp1-uart2-sleep {
+				function = "gpio";
+				pins = "gpio4", "gpio5";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			blsp2_uart2_default: blsp2-uart2-default {
+				function = "blsp_uart8";
+				pins = "gpio45", "gpio46", "gpio47", "gpio48";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			blsp2_uart2_sleep: blsp2-uart2-sleep {
+				function = "gpio";
+				pins = "gpio45", "gpio46", "gpio47", "gpio48";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			sdc1_clk_on: clk-on {
+				pins = "sdc1_clk";
+				bias-disable;
+				drive-strength = <6>;
+			};
+
+			sdc1_clk_off: clk-off {
+				pins = "sdc1_clk";
+				bias-disable;
+				drive-strength = <2>;
+			};
+
+			sdc1_cmd_on: cmd-on {
+				pins = "sdc1_cmd";
+				bias-pull-up;
+				drive-strength = <6>;
+			};
+
+			sdc1_cmd_off: cmd-off {
+				pins = "sdc1_cmd";
+				bias-pull-up;
+				drive-strength = <2>;
+			};
+
+			sdc1_data_on: data-on {
+				pins = "sdc1_data";
+				bias-pull-up;
+				drive-strength = <6>;
+			};
+
+			sdc1_data_off: data-off {
+				pins = "sdc1_data";
+				bias-pull-up;
+				drive-strength = <2>;
+			};
+
+			sdc1_rclk_on: rclk-on {
+				pins = "sdc1_rclk";
+				bias-pull-down;
+			};
+
+			sdc1_rclk_off: rclk-off {
+				pins = "sdc1_rclk";
+				bias-pull-down;
+			};
+
+			i2c2_default: i2c2-default {
+				function = "blsp_i2c2";
+				pins = "gpio6", "gpio7";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c2_sleep: i2c2-sleep {
+				function = "gpio";
+				pins = "gpio6", "gpio7";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c5_default: i2c5-default {
+				/* Don't be fooled! Nobody knows the reason why though... */
+				function = "blsp_i2c11";
+				pins = "gpio83", "gpio84";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c5_sleep: i2c5-sleep {
+				function = "gpio";
+				pins = "gpio83", "gpio84";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c6_default: i2c6-default {
+				function = "blsp_i2c6";
+				pins = "gpio28", "gpio27";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c6_sleep: i2c6-sleep {
+				function = "gpio";
+				pins = "gpio28", "gpio27";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c7_default: i2c7-default {
+				function = "blsp_i2c7";
+				pins = "gpio43", "gpio44";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c7_sleep: i2c7-sleep {
+				function = "gpio";
+				pins = "gpio43", "gpio44";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c13_default: i2c13-default {
+				/* Not a typo either. */
+				function = "blsp_i2c5";
+				pins = "gpio23", "gpio24";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c13_sleep: i2c13-sleep {
+				function = "gpio";
+				pins = "gpio23", "gpio24";
+				drive-strength = <2>;
+				bias-disable;
+			};
 		};
 	};
 
@@ -258,58 +585,35 @@
 			qcom,local-pid = <0>;
 			qcom,remote-pid = <6>;
 
-			rpm-requests {
+			rpm_requests: rpm-requests {
 				compatible = "qcom,rpm-msm8994";
 				qcom,smd-channels = "rpm_requests";
 
-				pm8994-regulators {
-					compatible = "qcom,rpm-pm8994-regulators";
-
-					pm8994_s1: s1 {};
-					pm8994_s2: s2 {};
-					pm8994_s3: s3 {};
-					pm8994_s4: s4 {};
-					pm8994_s5: s5 {};
-					pm8994_s6: s6 {};
-					pm8994_s7: s7 {};
-
-					pm8994_l1: l1 {};
-					pm8994_l2: l2 {};
-					pm8994_l3: l3 {};
-					pm8994_l4: l4 {};
-					pm8994_l6: l6 {};
-					pm8994_l8: l8 {};
-					pm8994_l9: l9 {};
-					pm8994_l10: l10 {};
-					pm8994_l11: l11 {};
-					pm8994_l12: l12 {};
-					pm8994_l13: l13 {};
-					pm8994_l14: l14 {};
-					pm8994_l15: l15 {};
-					pm8994_l16: l16 {};
-					pm8994_l17: l17 {};
-					pm8994_l18: l18 {};
-					pm8994_l19: l19 {};
-					pm8994_l20: l20 {};
-					pm8994_l21: l21 {};
-					pm8994_l22: l22 {};
-					pm8994_l23: l23 {};
-					pm8994_l24: l24 {};
-					pm8994_l25: l25 {};
-					pm8994_l26: l26 {};
-					pm8994_l27: l27 {};
-					pm8994_l28: l28 {};
-					pm8994_l29: l29 {};
-					pm8994_l30: l30 {};
-					pm8994_l31: l31 {};
-					pm8994_l32: l32 {};
-
-					pm8994_lvs1: lvs1 {};
-					pm8994_lvs2: lvs2 {};
+				rpmcc: rpmcc {
+					compatible = "qcom,rpmcc-msm8992";
+					#clock-cells = <1>;
 				};
 			};
 		};
 	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		status = "okay";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
 };
 
-#include "msm8992-pins.dtsi"
diff --git a/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts
index a5f9a6ab512c..baa55643b40f 100644
--- a/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts
+++ b/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts
@@ -11,6 +11,8 @@
 	model = "Huawei Nexus 6P";
 	compatible = "huawei,angler", "qcom,msm8994";
 	/* required for bootloader to select correct board */
+	qcom,msm-id = <207 0x20000>;
+	qcom,pmic-id = <0x10009 0x1000A 0x0 0x0>;
 	qcom,board-id = <8026 0>;
 
 	aliases {
diff --git a/arch/arm64/boot/dts/qcom/msm8994-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8994-pins.dtsi
deleted file mode 100644
index 2e118d967f53..000000000000
--- a/arch/arm64/boot/dts/qcom/msm8994-pins.dtsi
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
- */
-
-&msmgpio {
-	blsp1_uart2_default: blsp1_uart2_default {
-		pinmux {
-			function = "blsp_uart2";
-			pins = "gpio4", "gpio5";
-		};
-		pinconf {
-			pins = "gpio4", "gpio5";
-			drive-strength = <16>;
-			bias-disable;
-		};
-	};
-
-	blsp1_uart2_sleep: blsp1_uart2_sleep {
-		pinmux {
-			function = "gpio";
-			pins = "gpio4", "gpio5";
-		};
-		pinconf {
-			pins = "gpio4", "gpio5";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
-	};
-};
diff --git a/arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi b/arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi
deleted file mode 100644
index 31e3eb6ab515..000000000000
--- a/arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi
+++ /dev/null
@@ -1,268 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/* Copyright (c) 2015, LGE Inc. All rights reserved.
- * Copyright (c) 2016, The Linux Foundation. All rights reserved.
- */
-
-&smd_rpm {
-	rpm {
-		rpm_requests {
-			pm8994-regulators {
-
-				vdd_l1-supply = <&pm8994_s1>;
-				vdd_l2_26_28-supply = <&pm8994_s3>;
-				vdd_l3_11-supply = <&pm8994_s3>;
-				vdd_l4_27_31-supply = <&pm8994_s3>;
-				vdd_l5_7-supply = <&pm8994_s3>;
-				vdd_l6_12_32-supply = <&pm8994_s5>;
-				vdd_l8_16_30-supply = <&vreg_vph_pwr>;
-				vdd_l9_10_18_22-supply = <&vreg_vph_pwr>;
-				vdd_l13_19_23_24-supply = <&vreg_vph_pwr>;
-				vdd_l14_15-supply = <&pm8994_s5>;
-				vdd_l17_29-supply = <&vreg_vph_pwr>;
-				vdd_l20_21-supply = <&vreg_vph_pwr>;
-				vdd_l25-supply = <&pm8994_s5>;
-				vdd_lvs1_2 = <&pm8994_s4>;
-
-				s1 {
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <800000>;
-				};
-
-				s2 {
-					/* TODO */
-				};
-
-				s3 {
-					regulator-min-microvolt = <1300000>;
-					regulator-max-microvolt = <1300000>;
-				};
-
-				s4 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-allow-set-load;
-					regulator-system-load = <325000>;
-				};
-
-				s5 {
-					regulator-min-microvolt = <2150000>;
-					regulator-max-microvolt = <2150000>;
-				};
-
-				s7 {
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-				};
-
-				l1 {
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-				};
-
-				l2 {
-					regulator-min-microvolt = <1250000>;
-					regulator-max-microvolt = <1250000>;
-				};
-
-				l3 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				l4 {
-					regulator-min-microvolt = <1225000>;
-					regulator-max-microvolt = <1225000>;
-				};
-
-				l5 {
-					/* TODO */
-				};
-
-				l6 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				l7 {
-					/* TODO */
-				};
-
-				l8 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				l9 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				l10 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,init-voltage = <1800000>;
-				};
-
-				l11 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					qcom,init-voltage = <1200000>;
-				};
-
-				l12 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,init-voltage = <1800000>;
-					proxy-supply = <&pm8994_l12>;
-					qcom,proxy-consumer-enable;
-					qcom,proxy-consumer-current = <10000>;
-					status = "okay";
-				};
-
-				l13 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <2950000>;
-					qcom,init-voltage = <2950000>;
-					status = "okay";
-				};
-
-				l14 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					qcom,init-voltage = <1200000>;
-					proxy-supply = <&pm8994_l14>;
-					qcom,proxy-consumer-enable;
-					qcom,proxy-consumer-current = <10000>;
-					status = "okay";
-				};
-
-				l15 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,init-voltage = <1800000>;
-					status = "okay";
-				};
-
-				l16 {
-					regulator-min-microvolt = <2700000>;
-					regulator-max-microvolt = <2700000>;
-					qcom,init-voltage = <2700000>;
-					status = "okay";
-				};
-
-				l17 {
-					regulator-min-microvolt = <2700000>;
-					regulator-max-microvolt = <2700000>;
-					qcom,init-voltage = <2700000>;
-					status = "okay";
-				};
-
-				l18 {
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					regulator-always-on;
-					qcom,init-voltage = <3000000>;
-					qcom,init-ldo-mode = <1>;
-				};
-
-				l19 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,init-voltage = <1800000>;
-					status = "okay";
-				};
-
-				l20 {
-					regulator-min-microvolt = <2950000>;
-					regulator-max-microvolt = <2950000>;
-					regulator-always-on;
-					regulator-boot-on;
-					regulator-allow-set-load;
-					regulator-system-load = <570000>;
-				};
-
-				l21 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					qcom,init-voltage = <1800000>;
-				};
-
-				l22 {
-					regulator-min-microvolt = <3100000>;
-					regulator-max-microvolt = <3100000>;
-					qcom,init-voltage = <3100000>;
-				};
-
-				l23 {
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					qcom,init-voltage = <2800000>;
-				};
-
-				l24 {
-					regulator-min-microvolt = <3075000>;
-					regulator-max-microvolt = <3150000>;
-					qcom,init-voltage = <3075000>;
-				};
-
-				l25 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,init-voltage = <1800000>;
-				};
-
-				l26 {
-					/* TODO: value from downstream
-					regulator-min-microvolt = <987500>;
-					fails to apply */
-				};
-
-				l27 {
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-					qcom,init-voltage = <1050000>;
-				};
-
-				l28 {
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					qcom,init-voltage = <1000000>;
-					proxy-supply = <&pm8994_l28>;
-					qcom,proxy-consumer-enable;
-					qcom,proxy-consumer-current = <10000>;
-				};
-
-				l29 {
-					/* TODO: Unsupported voltage range.
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					qcom,init-voltage = <2800000>;
-					*/
-				};
-
-				l30 {
-					/* TODO: get this verified
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,init-voltage = <1800000>;
-					*/
-				};
-
-				l31 {
-					regulator-min-microvolt = <1262500>;
-					regulator-max-microvolt = <1262500>;
-					qcom,init-voltage = <1262500>;
-				};
-
-				l32 {
-					/* TODO: get this verified
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,init-voltage = <1800000>;
-					*/
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts
new file mode 100644
index 000000000000..5d6bbbf6c119
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+/dts-v1/;
+
+#include "msm8994-sony-xperia-kitakami.dtsi"
+
+/ {
+	model = "Sony Xperia Z5";
+	compatible = "sony,sumire-row", "qcom,msm8994";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
new file mode 100644
index 000000000000..4032b7478f04
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
@@ -0,0 +1,235 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+#include "msm8994.dtsi"
+#include "pm8994.dtsi"
+#include "pmi8994.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+
+/ {
+	/* required for bootloader to select correct board */
+	qcom,msm-id = <0xcf 0x20001>;
+	qcom,pmic-id = <0x10009 0x1000a 0x00 0x00>;
+	qcom,board-id = <8 0>;
+
+	/* Kitakami firmware doesn't support PSCI */
+	/delete-node/ psci;
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		input-name = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+
+		button@0 {
+			label = "Volume Down";
+			gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		button@1 {
+			label = "Volume Up";
+			gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		button@2 {
+			label = "Camera Snapshot";
+			gpios = <&pm8994_gpios 4 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		button@3 {
+			label = "Camera Focus";
+			gpios = <&pm8994_gpios 5 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* This is for getting crash logs using Android downstream kernels */
+		ramoops@1fe00000 {
+			compatible = "ramoops";
+			reg = <0x0 0x1fe00000 0x0 0x200000>;
+			console-size = <0x100000>;
+			record-size = <0x10000>;
+			ftrace-size = <0x10000>;
+			pmsg-size = <0x80000>;
+		};
+
+		continuous_splash: framebuffer@3401000{
+			reg = <0x0 0x3401000 0x0 0x2200000>;
+			no-map;
+		};
+
+		dfps_data_mem: dfps_data_mem@3400000 {
+			reg = <0x0 0x3400000 0x0 0x1000>;
+			no-map;
+		};
+
+		peripheral_region: peripheral_region@7400000 {
+			reg = <0x0 0x7400000 0x0 0x1c00000>;
+			no-map;
+		};
+
+		modem_region: modem_region@9000000 {
+			reg = <0x0 0x9000000 0x0 0x5a00000>;
+			no-map;
+		};
+
+		tzapp: modem_region@ea00000 {
+			reg = <0x0 0xea00000 0x0 0x1900000>;
+			no-map;
+		};
+
+		fb_region: fb_region@40000000 {
+			reg = <0x00 0x40000000 0x00 0x1000000>;
+			no-map;
+		};
+	};
+};
+
+&blsp_spi0 {
+	status = "okay";
+
+	/* FPC fingerprint reader */
+};
+
+/* I2C1 is disabled on this board */
+
+&blsp_i2c2 {
+	status = "okay";
+
+	/* NXP NFC */
+};
+
+&blsp_i2c4 {
+	status = "okay";
+
+	/* Empty but active */
+};
+
+&blsp_i2c5 {
+	status = "okay";
+
+	/* SMB1357 charger and sii8620 HDMI/MHL bridge */
+};
+
+&blsp_i2c6 {
+	status = "okay";
+
+	/* Synaptics touchscreen */
+};
+
+&blsp1_uart2 {
+	status = "okay";
+};
+
+&blsp2_uart2 {
+	status = "okay";
+};
+
+&rpm_requests {
+	pm8994_regulators: pm8994-regulators {
+		compatible = "qcom,rpm-pm8994-regulators";
+		vdd_l1-supply = <&pm8994_s1>;
+		vdd_l2_26_28-supply = <&pm8994_s3>;
+		vdd_l3_11-supply = <&pm8994_s3>;
+		vdd_l4_27_31-supply = <&pm8994_s3>;
+		vdd_l5_7-supply = <&pm8994_s3>;
+		vdd_l6_12_32-supply = <&pm8994_s5>;
+		vdd_l8_16_30-supply = <&vreg_vph_pwr>;
+		vdd_l9_10_18_22-supply = <&vreg_vph_pwr>;
+		vdd_l13_19_23_24-supply = <&vreg_vph_pwr>;
+		vdd_l14_15-supply = <&pm8994_s5>;
+		vdd_l17_29-supply = <&vreg_vph_pwr>;
+		vdd_l20_21-supply = <&vreg_vph_pwr>;
+		vdd_l25-supply = <&pm8994_s5>;
+		vdd_lvs1_2 = <&pm8994_s4>;
+
+		pm8994_s1: s1 {};
+		pm8994_s2: s2 {};
+		pm8994_s3: s3 {};
+		pm8994_s4: s4 {};
+		pm8994_s5: s5 {};
+		pm8994_s6: s6 {};
+		pm8994_s7: s7 {};
+
+		pm8994_l1: l1 {};
+		pm8994_l2: l2 {};
+		pm8994_l3: l3 {};
+		pm8994_l4: l4 {};
+		pm8994_l6: l6 {};
+		pm8994_l8: l8 {};
+		pm8994_l9: l9 {};
+		pm8994_l10: l10 {};
+		pm8994_l11: l11 {};
+		pm8994_l12: l12 {};
+		pm8994_l13: l13 {};
+		pm8994_l14: l14 {};
+		pm8994_l15: l15 {};
+		pm8994_l16: l16 {};
+		pm8994_l17: l17 {};
+		pm8994_l18: l18 {};
+		pm8994_l19: l19 {};
+		pm8994_l20: l20 {};
+		pm8994_l21: l21 {};
+		pm8994_l22: l22 {};
+		pm8994_l23: l23 {};
+		pm8994_l24: l24 {};
+		pm8994_l25: l25 {};
+		pm8994_l26: l26 {};
+		pm8994_l27: l27 {};
+		pm8994_l28: l28 {};
+		pm8994_l29: l29 {};
+		pm8994_l30: l30 {};
+		pm8994_l31: l31 {};
+		pm8994_l32: l32 {};
+
+		pm8994_lvs1: lvs1 {};
+		pm8994_lvs2: lvs2 {};
+	};
+
+	pmi8994_regulators: pmi8994-regulators {
+		compatible = "qcom,rpm-pmi8994-regulators";
+
+		pmi8994_s1: s1 {};
+		pmi8994_s2: s2 {};
+		pmi8994_s3: s3 {};
+		pmi8994_bby: boost-bypass {};
+	};
+};
+
+&sdhc1 {
+	status = "okay";
+
+	/* Downstream pushes 2.95V to the sdhci device,
+	 * but upstream driver REALLY wants to make vmmc 1.8v
+	 * cause of the hs400-1_8v mode. MMC works fine without
+	 * that regulator, so let's not use it for now.
+	 * vqmmc is also disabled cause driver stll complains.
+	 *
+	 * vmmc-supply = <&pm8994_l20>;
+	 * vqmmc-supply = <&pm8994_s4>;
+	 */
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi
index b1c2d7d6a0f2..6707f898607f 100644
--- a/arch/arm64/boot/dts/qcom/msm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi
@@ -6,12 +6,6 @@
 #include <dt-bindings/clock/qcom,gcc-msm8994.h>
 
 / {
-	model = "Qualcomm Technologies, Inc. MSM 8994";
-	compatible = "qcom,msm8994";
-	// msm-id and pmic-id are required by bootloader for
-	// proper selection of dt blob
-	qcom,msm-id = <207 0x20000>;
-	qcom,pmic-id = <0x10009 0x1000A 0x0 0x0>;
 	interrupt-parent = <&intc>;
 
 	#address-cells = <2>;
@@ -19,35 +13,194 @@
 
 	chosen { };
 
+	clocks {
+		xo_board: xo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+		};
+
+		sleep_clk: sleep_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
 	cpus {
-		#address-cells = <1>;
+		#address-cells = <2>;
 		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+			};
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			next-level-cache = <&L2_1>;
+			L2_1: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+			};
+		};
+
+		CPU5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+			next-level-cache = <&L2_1>;
+		};
+
+		CPU6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+			next-level-cache = <&L2_1>;
+		};
+
+		CPU7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a57";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+			next-level-cache = <&L2_1>;
+		};
+
 		cpu-map {
 			cluster0 {
 				core0 {
 					cpu = <&CPU0>;
 				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&CPU4>;
+				};
+
+				core1 {
+					cpu = <&CPU5>;
+				};
+
+				core2 {
+					cpu = <&CPU6>;
+				};
+
+				core3 {
+					cpu = <&CPU7>;
+				};
 			};
 		};
+	};
 
-		CPU0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a53";
-			reg = <0x0>;
-			next-level-cache = <&L2_0>;
-			L2_0: l2-cache {
-			      compatible = "cache";
-			      cache-level = <2>;
+	firmware {
+		scm {
+			compatible = "qcom,scm-msm8994", "qcom,scm";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0 0 0 0>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4)| IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "hvc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		smem_mem: smem_region@6a00000 {
+			reg = <0x0 0x6a00000 0x0 0x200000>;
+			no-map;
+		};
+	};
+
+	smd {
+		compatible = "qcom,smd";
+		rpm {
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			qcom,ipc = <&apcs 8 0>;
+			qcom,smd-edge = <15>;
+			qcom,local-pid = <0>;
+			qcom,remote-pid = <6>;
+
+			rpm_requests: rpm-requests {
+				compatible = "qcom,rpm-msm8994";
+				qcom,smd-channels = "rpm_requests";
+
+				rpmcc: rpmcc {
+					compatible = "qcom,rpmcc-msm8994";
+					#clock-cells = <1>;
+				};
 			};
 		};
 	};
 
-	timer {
-		compatible = "arm,armv8-timer";
-		interrupts = <1 2 0xff08>,
-			     <1 3 0xff08>,
-			     <1 4 0xff08>,
-			     <1 1 0xff08>;
+	smem {
+		compatible = "qcom,smem";
+		memory-region = <&smem_mem>;
+		qcom,rpm-msg-ram = <&rpm_msg_ram>;
+		hwlocks = <&tcsr_mutex 3>;
 	};
 
 	soc: soc {
@@ -62,7 +215,13 @@
 			interrupt-controller;
 			#interrupt-cells = <3>;
 			reg = <0xf9000000 0x1000>,
-				  <0xf9002000 0x1000>;
+			      <0xf9002000 0x1000>;
+		};
+
+		apcs: mailbox@f900d000 {
+			compatible = "qcom,msm8994-apcs-kpss-global", "syscon";
+			reg = <0xf900d000 0x2000>;
+			#mbox-cells = <1>;
 		};
 
 		timer@f9020000 {
@@ -123,72 +282,407 @@
 			};
 		};
 
-		restart@fc4ab000 {
-			compatible = "qcom,pshold";
-			reg = <0xfc4ab000 0x4>;
+		sdhc1: sdhci@f9824900 {
+			compatible = "qcom,sdhci-msm-v4";
+			reg = <0xf9824900 0x1a0>, <0xf9824000 0x800>;
+			reg-names = "hc_mem", "core_mem";
+
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
+			         <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&xo_board>;
+			clock-names = "core", "iface", "xo";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>;
+			pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>;
+
+			bus-width = <8>;
+			non-removable;
+			status = "disabled";
 		};
 
-		msmgpio: pinctrl@fd510000 {
-			compatible = "qcom,msm8994-pinctrl";
-			reg = <0xfd510000 0x4000>;
-			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			gpio-ranges = <&msmgpio 0 0 146>;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
+		blsp1_dma: dma@f9904000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0xf9904000 0x19000>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			num-channels = <18>;
+			qcom,num-ees = <4>;
 		};
 
 		blsp1_uart2: serial@f991e000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0xf991e000 0x1000>;
 			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "iface";
+			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_uart2_default>;
+			pinctrl-1 = <&blsp1_uart2_sleep>;
 			status = "disabled";
+		};
+
+		blsp_i2c1: i2c@f9923000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0xf9923000 0x500>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+						<&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>;
+			clock-names = "iface", "core";
+			clock-frequency = <400000>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c1_default>;
+			pinctrl-1 = <&i2c1_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_spi0: spi@f9923000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0xf9923000 0x500>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
 			clock-names = "core", "iface";
-			clocks = <&clock_gcc GCC_BLSP1_UART2_APPS_CLK>,
-				 <&clock_gcc GCC_BLSP1_AHB_CLK>;
+			spi-max-frequency = <19200000>;
+			dmas = <&blsp1_dma 12>, <&blsp1_dma 13>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_spi0_default>;
+			pinctrl-1 = <&blsp1_spi0_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
 		};
 
-		tcsr_mutex_regs: syscon@fd484000 {
-			compatible = "syscon";
-			reg = <0xfd484000 0x2000>;
+		blsp_i2c2: i2c@f9924000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0xf9924000 0x500>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+						<&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
+			clock-names = "iface", "core";
+			clock-frequency = <355000>;
+			dmas = <&blsp1_dma 14>, <&blsp1_dma 15>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c2_default>;
+			pinctrl-1 = <&i2c2_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		/* I2C3 doesn't exist */
+
+		blsp_i2c4: i2c@f9926000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0xf9926000 0x500>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+						<&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>;
+			clock-names = "iface", "core";
+			clock-frequency = <355000>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c4_default>;
+			pinctrl-1 = <&i2c4_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp2_dma: dma@f9944000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0xf9944000 0x19000>;
+			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			num-channels = <18>;
+			qcom,num-ees = <4>;
+		};
+
+		/* According to downstream kernels, i2c6
+		 * comes before i2c5 address-wise...
+		 */
+
+		blsp_i2c6: i2c@f9928000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0xf9928000 0x500>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+						<&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>;
+			clock-names = "iface", "core";
+			clock-frequency = <355000>;
+			dmas = <&blsp1_dma 22>, <&blsp1_dma 23>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c6_default>;
+			pinctrl-1 = <&i2c6_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp2_uart2: serial@f995e000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0xf995e000 0x1000>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_EDGE_FALLING>;
+			clock-names = "core", "iface";
+			clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>,
+					<&gcc GCC_BLSP2_AHB_CLK>;
+			dmas = <&blsp2_dma 2>, <&blsp2_dma 3>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_uart2_default>;
+			pinctrl-1 = <&blsp2_uart2_sleep>;
+			status = "disabled";
 		};
 
-		clock_gcc: clock-controller@fc400000 {
+		blsp_i2c5: i2c@f9967000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0xf9967000 0x500>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>,
+						<&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>;
+			clock-names = "iface", "core";
+			clock-frequency = <355000>;
+			dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c5_default>;
+			pinctrl-1 = <&i2c5_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		gcc: clock-controller@fc400000 {
 			compatible = "qcom,gcc-msm8994";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
 			reg = <0xfc400000 0x2000>;
 		};
-	};
 
-	memory {
-		device_type = "memory";
-		// We expect the bootloader to fill in the reg
-		reg = <0 0 0 0>;
-	};
+		rpm_msg_ram: memory@fc428000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0xfc428000 0x4000>;
+		};
 
-	xo_board: xo_board {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <19200000>;
-	};
+		restart@fc4ab000 {
+			compatible = "qcom,pshold";
+			reg = <0xfc4ab000 0x4>;
+		};
 
-	sleep_clk: sleep_clk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
-	};
+		spmi_bus: spmi@fc4c0000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0xfc4cf000 0x1000>,
+			      <0xfc4cb000 0x1000>,
+			      <0xfc4ca000 0x1000>;
+			reg-names = "core", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+		};
 
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
+		tcsr_mutex_regs: syscon@fd484000 {
+			compatible = "syscon";
+			reg = <0xfd484000 0x2000>;
+		};
 
-		smem_mem: smem_region@6a00000 {
-			reg = <0x0 0x6a00000 0x0 0x200000>;
-			no-map;
+		tlmm: pinctrl@fd510000 {
+			compatible = "qcom,msm8994-pinctrl";
+			reg = <0xfd510000 0x4000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 146>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			blsp1_uart2_default: blsp1-uart2-default {
+				function = "blsp_uart2";
+				pins = "gpio4", "gpio5";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			blsp1_uart2_sleep: blsp1-uart2-sleep {
+				function = "gpio";
+				pins = "gpio4", "gpio5";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			blsp2_uart2_default: blsp2-uart2-default {
+				function = "blsp_uart8";
+				pins = "gpio45", "gpio46";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_uart2_sleep: blsp2-uart2-sleep {
+				function = "gpio";
+				pins = "gpio45", "gpio46";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			i2c1_default: i2c1-default {
+				function = "blsp_i2c1";
+				pins = "gpio2", "gpio3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c1_sleep: i2c1-sleep {
+				function = "gpio";
+				pins = "gpio2", "gpio3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c2_default: i2c2-default {
+				function = "blsp_i2c2";
+				pins = "gpio6", "gpio7";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c2_sleep: i2c2-sleep {
+				function = "gpio";
+				pins = "gpio6", "gpio7";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c4_default: i2c4-default {
+				function = "blsp_i2c4";
+				pins = "gpio19", "gpio20";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c4_sleep: i2c4-sleep {
+				function = "gpio";
+				pins = "gpio19", "gpio20";
+				drive-strength = <2>;
+				bias-pull-down;
+				input-enable;
+			};
+
+			i2c5_default: i2c5-default {
+				function = "blsp_i2c5";
+				pins = "gpio23", "gpio24";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c5_sleep: i2c5-sleep {
+				function = "gpio";
+				pins = "gpio23", "gpio24";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c6_default: i2c6-default {
+				function = "blsp_i2c6";
+				pins = "gpio28", "gpio27";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c6_sleep: i2c6-sleep {
+				function = "gpio";
+				pins = "gpio28", "gpio27";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_spi0_default: blsp1-spi0-default {
+				default {
+					function = "blsp_spi1";
+					pins = "gpio0", "gpio1", "gpio3";
+					drive-strength = <10>;
+					bias-pull-down;
+				};
+				cs {
+					function = "gpio";
+					pins = "gpio8";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			blsp1_spi0_sleep: blsp1-spi0-sleep {
+				pins = "gpio0", "gpio1", "gpio3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			sdc1_clk_on: clk-on {
+				pins = "sdc1_clk";
+				bias-disable;
+				drive-strength = <16>;
+			};
+
+			sdc1_clk_off: clk-off {
+				pins = "sdc1_clk";
+				bias-disable;
+				drive-strength = <2>;
+			};
+
+			sdc1_cmd_on: cmd-on {
+				pins = "sdc1_cmd";
+				bias-pull-up;
+				drive-strength = <8>;
+			};
+
+			sdc1_cmd_off: cmd-off {
+				pins = "sdc1_cmd";
+				bias-pull-up;
+				drive-strength = <2>;
+			};
+
+			sdc1_data_on: data-on {
+				pins = "sdc1_data";
+				bias-pull-up;
+				drive-strength = <8>;
+			};
+
+			sdc1_data_off: data-off {
+				pins = "sdc1_data";
+				bias-pull-up;
+				drive-strength = <2>;
+			};
+
+			sdc1_rclk_on: rclk-on {
+				pins = "sdc1_rclk";
+				bias-pull-down;
+			};
+
+			sdc1_rclk_off: rclk-off {
+				pins = "sdc1_rclk";
+				bias-pull-down;
+			};
 		};
 	};
 
@@ -198,12 +692,22 @@
 		#hwlock-cells = <1>;
 	};
 
-	qcom,smem@6a00000 {
-		compatible = "qcom,smem";
-		memory-region = <&smem_mem>;
-		hwlocks = <&tcsr_mutex 3>;
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 2 0xff08>,
+			     <GIC_PPI 3 0xff08>,
+			     <GIC_PPI 4 0xff08>,
+			     <GIC_PPI 1 0xff08>;
 	};
-};
 
+	vreg_vph_pwr: vreg-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph-pwr";
+
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		regulator-always-on;
+	};
+};
 
-#include "msm8994-pins.dtsi"
diff --git a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
index 6ab830d01867..00d84fb21798 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
@@ -202,7 +202,7 @@
 			regulator-min-microvolt = <1880000>;
 			regulator-max-microvolt = <1880000>;
 		};
-		vreg_15a_1p8: l15 {
+		vreg_l15a_1p8: l15 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 		};
diff --git a/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts b/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts
index 407c6a32911c..89492ed5196c 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts
+++ b/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts
@@ -25,6 +25,11 @@
 	};
 };
 
+&remoteproc_mss {
+	firmware-name = "qcom/LENOVO/81F1/qcdsp1v28998.mbn",
+			"qcom/LENOVO/81F1/qcdsp28998.mbn";
+};
+
 &sdhc2 {
 	cd-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
 };
diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
index 8a14b2bf7bca..cec42437b302 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
@@ -235,7 +235,7 @@
 			regulator-min-microvolt = <1880000>;
 			regulator-max-microvolt = <1880000>;
 		};
-		vreg_15a_1p8: l15 {
+		vreg_l15a_1p8: l15 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 		};
diff --git a/arch/arm64/boot/dts/qcom/pm660.dtsi b/arch/arm64/boot/dts/qcom/pm660.dtsi
new file mode 100644
index 000000000000..ea0e9558d0f2
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm660.dtsi
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+
+	pmic@0 {
+		compatible = "qcom,pm660", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>, <0x6100>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		pon: pon@800 {
+			compatible = "qcom,pm8916-pon";
+
+			reg = <0x800>;
+
+			pwrkey {
+				compatible = "qcom,pm8941-pwrkey";
+				interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				linux,code = <KEY_POWER>;
+			};
+
+		};
+
+		pm660_gpios: gpios@c000 {
+			compatible = "qcom,pm660-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm660_gpios 0 0 13>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			interrupt-cells =<2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm660l.dtsi b/arch/arm64/boot/dts/qcom/pm660l.dtsi
new file mode 100644
index 000000000000..edba6de02084
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm660l.dtsi
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+
+	pmic@2 {
+		compatible = "qcom,pm660l", "qcom,spmi-pmic";
+		reg = <0x2 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm660l_gpios: gpios@c000 {
+			compatible = "qcom,pm660l-gpio", "qcom,spmi-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			gpio-ranges = <&pm660l_gpios 0 0 12>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@3 {
+		compatible = "qcom,pm660l", "qcom,spmi-pmic";
+		reg = <0x3 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
+
diff --git a/arch/arm64/boot/dts/qcom/pm8009.dtsi b/arch/arm64/boot/dts/qcom/pm8009.dtsi
new file mode 100644
index 000000000000..b126d7e7e4fb
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8009.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2020, Linaro Limited
+ */
+
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+	pmic@a {
+		compatible = "qcom,pm8009", "qcom,spmi-pmic";
+		reg = <0xa SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8009_pon: pon@800 {
+			compatible = "qcom,pm8916-pon";
+			reg = <0x0800>;
+		};
+
+		pm8009_gpios: gpio@c000 {
+			compatible = "qcom,pm8005-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	pmic@b {
+		compatible = "qcom,pm8009", "qcom,spmi-pmic";
+		reg = <0xb SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi
index c0b197458665..1b6406927509 100644
--- a/arch/arm64/boot/dts/qcom/pm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi
@@ -9,6 +9,37 @@
 #include <dt-bindings/spmi/spmi.h>
 #include <dt-bindings/iio/qcom,spmi-vadc.h>
 
+/ {
+	thermal-zones {
+		pm8150 {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm8150_temp>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+
+				trip2 {
+					temperature = <145000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
 &spmi_bus {
 	pm8150_0: pmic@0 {
 		compatible = "qcom,pm8150", "qcom,spmi-pmic";
@@ -30,6 +61,15 @@
 			};
 		};
 
+		pm8150_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+			io-channels = <&pm8150_adc ADC5_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
 		pm8150_adc: adc@3100 {
 			compatible = "qcom,spmi-adc5";
 			reg = <0x3100>;
@@ -38,8 +78,6 @@
 			#io-channel-cells = <1>;
 			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
 
-			status = "disabled";
-
 			ref-gnd@0 {
 				reg = <ADC5_REF_GND>;
 				qcom,pre-scaling = <1 1>;
diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
index 40b5d75a4a1d..e112e8876db6 100644
--- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
@@ -8,6 +8,37 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/spmi/spmi.h>
 
+/ {
+	thermal-zones {
+		pm8150b {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm8150b_temp>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+
+				trip2 {
+					temperature = <145000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
 &spmi_bus {
 	pmic@2 {
 		compatible = "qcom,pm8150b", "qcom,spmi-pmic";
@@ -22,7 +53,16 @@
 			status = "disabled";
 		};
 
-		adc@3100 {
+		pm8150b_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x2 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+			io-channels = <&pm8150b_adc ADC5_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8150b_adc: adc@3100 {
 			compatible = "qcom,spmi-adc5";
 			reg = <0x3100>;
 			#address-cells = <1>;
@@ -30,8 +70,6 @@
 			#io-channel-cells = <1>;
 			interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
 
-			status = "disabled";
-
 			ref-gnd@0 {
 				reg = <ADC5_REF_GND>;
 				qcom,pre-scaling = <1 1>;
diff --git a/arch/arm64/boot/dts/qcom/pm8150l.dtsi b/arch/arm64/boot/dts/qcom/pm8150l.dtsi
index cf05e0685d10..62139538b7d9 100644
--- a/arch/arm64/boot/dts/qcom/pm8150l.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150l.dtsi
@@ -8,6 +8,37 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/spmi/spmi.h>
 
+/ {
+	thermal-zones {
+		pm8150l {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+
+			thermal-sensors = <&pm8150l_temp>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+
+				trip2 {
+					temperature = <145000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
 &spmi_bus {
 	pmic@4 {
 		compatible = "qcom,pm8150l", "qcom,spmi-pmic";
@@ -22,7 +53,16 @@
 			status = "disabled";
 		};
 
-		adc@3100 {
+		pm8150l_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x4 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+			io-channels = <&pm8150l_adc ADC5_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8150l_adc: adc@3100 {
 			compatible = "qcom,spmi-adc5";
 			reg = <0x3100>;
 			#address-cells = <1>;
@@ -30,8 +70,6 @@
 			#io-channel-cells = <1>;
 			interrupts = <0x4 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
 
-			status = "disabled";
-
 			ref-gnd@0 {
 				reg = <ADC5_REF_GND>;
 				qcom,pre-scaling = <1 1>;
diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
index 23f9146a161e..d016b12967eb 100644
--- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi
@@ -25,5 +25,17 @@
 		reg = <0x3 SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+
+		labibb {
+			compatible = "qcom,pmi8998-lab-ibb";
+
+			ibb: ibb {
+				interrupts = <0x3 0xdc 0x2 IRQ_TYPE_EDGE_RISING>;
+			};
+
+			lab: lab {
+				interrupts = <0x3 0xde 0x0 IRQ_TYPE_EDGE_RISING>;
+			};
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index c685a1664810..b654b802e95c 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -1097,6 +1097,21 @@
 			status = "disabled";
 		};
 
+		imem@8600000 {
+			compatible = "simple-mfd";
+			reg = <0x08600000 0x1000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ranges = <0 0x08600000 0x1000>;
+
+			pil-reloc@94c {
+				compatible = "qcom,pil-reloc-info";
+				reg = <0x94c 0xc8>;
+			};
+		};
+
 		intc: interrupt-controller@b000000 {
 			compatible = "qcom,msm-qgic2";
 			interrupt-controller;
diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
index 4e9149d82d09..d8b550723b32 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
@@ -21,6 +21,7 @@
 		bluetooth0 = &bluetooth;
 		hsuart0 = &uart3;
 		serial0 = &uart8;
+		wifi0 = &wifi;
 	};
 
 	chosen {
@@ -287,6 +288,10 @@
 	};
 };
 
+&qfprom {
+	vcc-supply = <&vreg_l11a_1p8>;
+};
+
 &qspi {
 	status = "okay";
 	pinctrl-names = "default";
@@ -312,7 +317,7 @@
 &remoteproc_mpss {
 	status = "okay";
 	compatible = "qcom,sc7180-mss-pil";
-	iommus = <&apps_smmu 0x460 0x1>, <&apps_smmu 0x444 0x3>;
+	iommus = <&apps_smmu 0x461 0x0>, <&apps_smmu 0x444 0x3>;
 	memory-region = <&mba_mem &mpss_mem>;
 };
 
@@ -389,6 +394,18 @@
 	};
 };
 
+&wifi {
+	status = "okay";
+	vdd-0.8-cx-mx-supply = <&vreg_l9a_0p6>;
+	vdd-1.8-xo-supply = <&vreg_l1c_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l2c_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l10c_3p3>;
+	vdd-3.3-ch1-supply = <&vreg_l11c_3p3>;
+	wifi-firmware {
+		iommus = <&apps_smmu 0xc2 0x1>;
+	};
+};
+
 /* PINCTRL - additions to nodes defined in sc7180.dtsi */
 
 &qspi_clk {
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 31b9217bb5bf..d46b3833e52f 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -10,6 +10,7 @@
 #include <dt-bindings/clock/qcom,gpucc-sc7180.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/clock/qcom,videocc-sc7180.h>
+#include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sc7180.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/phy/phy-qcom-qusb2.h>
@@ -130,6 +131,9 @@
 					   &CLUSTER_SLEEP_0>;
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			next-level-cache = <&L2_0>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
@@ -153,6 +157,9 @@
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
 			next-level-cache = <&L2_100>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			L2_100: l2-cache {
@@ -172,6 +179,9 @@
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
 			next-level-cache = <&L2_200>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			L2_200: l2-cache {
@@ -191,6 +201,9 @@
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
 			next-level-cache = <&L2_300>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			L2_300: l2-cache {
@@ -210,6 +223,9 @@
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
 			next-level-cache = <&L2_400>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			L2_400: l2-cache {
@@ -229,6 +245,9 @@
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
 			next-level-cache = <&L2_500>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			L2_500: l2-cache {
@@ -248,6 +267,9 @@
 			capacity-dmips-mhz = <1740>;
 			dynamic-power-coefficient = <405>;
 			next-level-cache = <&L2_600>;
+			operating-points-v2 = <&cpu6_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			L2_600: l2-cache {
@@ -267,6 +289,9 @@
 			capacity-dmips-mhz = <1740>;
 			dynamic-power-coefficient = <405>;
 			next-level-cache = <&L2_700>;
+			operating-points-v2 = <&cpu6_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			L2_700: l2-cache {
@@ -366,6 +391,141 @@
 		};
 	};
 
+	cpu0_opp_table: cpu0_opp_table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		cpu0_opp1: opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-peak-kBps = <1200000 4800000>;
+		};
+
+		cpu0_opp2: opp-576000000 {
+			opp-hz = /bits/ 64 <576000000>;
+			opp-peak-kBps = <1200000 4800000>;
+		};
+
+		cpu0_opp3: opp-768000000 {
+			opp-hz = /bits/ 64 <768000000>;
+			opp-peak-kBps = <1200000 4800000>;
+		};
+
+		cpu0_opp4: opp-1017600000 {
+			opp-hz = /bits/ 64 <1017600000>;
+			opp-peak-kBps = <1804000 8908800>;
+		};
+
+		cpu0_opp5: opp-1248000000 {
+			opp-hz = /bits/ 64 <1248000000>;
+			opp-peak-kBps = <2188000 12902400>;
+		};
+
+		cpu0_opp6: opp-1324800000 {
+			opp-hz = /bits/ 64 <1324800000>;
+			opp-peak-kBps = <2188000 12902400>;
+		};
+
+		cpu0_opp7: opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-peak-kBps = <3072000 15052800>;
+		};
+
+		cpu0_opp8: opp-1612800000 {
+			opp-hz = /bits/ 64 <1612800000>;
+			opp-peak-kBps = <3072000 15052800>;
+		};
+
+		cpu0_opp9: opp-1708800000 {
+			opp-hz = /bits/ 64 <1708800000>;
+			opp-peak-kBps = <3072000 15052800>;
+		};
+
+		cpu0_opp10: opp-1804800000 {
+			opp-hz = /bits/ 64 <1804800000>;
+			opp-peak-kBps = <4068000 22425600>;
+		};
+	};
+
+	cpu6_opp_table: cpu6_opp_table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		cpu6_opp1: opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-peak-kBps = <2188000 8908800>;
+		};
+
+		cpu6_opp2: opp-652800000 {
+			opp-hz = /bits/ 64 <652800000>;
+			opp-peak-kBps = <2188000 8908800>;
+		};
+
+		cpu6_opp3: opp-825600000 {
+			opp-hz = /bits/ 64 <825600000>;
+			opp-peak-kBps = <2188000 8908800>;
+		};
+
+		cpu6_opp4: opp-979200000 {
+			opp-hz = /bits/ 64 <979200000>;
+			opp-peak-kBps = <2188000 8908800>;
+		};
+
+		cpu6_opp5: opp-1113600000 {
+			opp-hz = /bits/ 64 <1113600000>;
+			opp-peak-kBps = <2188000 8908800>;
+		};
+
+		cpu6_opp6: opp-1267200000 {
+			opp-hz = /bits/ 64 <1267200000>;
+			opp-peak-kBps = <4068000 12902400>;
+		};
+
+		cpu6_opp7: opp-1555200000 {
+			opp-hz = /bits/ 64 <1555200000>;
+			opp-peak-kBps = <4068000 15052800>;
+		};
+
+		cpu6_opp8: opp-1708800000 {
+			opp-hz = /bits/ 64 <1708800000>;
+			opp-peak-kBps = <6220000 19353600>;
+		};
+
+		cpu6_opp9: opp-1843200000 {
+			opp-hz = /bits/ 64 <1843200000>;
+			opp-peak-kBps = <6220000 19353600>;
+		};
+
+		cpu6_opp10: opp-1900800000 {
+			opp-hz = /bits/ 64 <1900800000>;
+			opp-peak-kBps = <6220000 22425600>;
+		};
+
+		cpu6_opp11: opp-1996800000 {
+			opp-hz = /bits/ 64 <1996800000>;
+			opp-peak-kBps = <6220000 22425600>;
+		};
+
+		cpu6_opp12: opp-2112000000 {
+			opp-hz = /bits/ 64 <2112000000>;
+			opp-peak-kBps = <6220000 22425600>;
+		};
+
+		cpu6_opp13: opp-2208000000 {
+			opp-hz = /bits/ 64 <2208000000>;
+			opp-peak-kBps = <7216000 22425600>;
+		};
+
+		cpu6_opp14: opp-2323200000 {
+			opp-hz = /bits/ 64 <2323200000>;
+			opp-peak-kBps = <7216000 22425600>;
+		};
+
+		cpu6_opp15: opp-2400000000 {
+			opp-hz = /bits/ 64 <2400000000>;
+			opp-peak-kBps = <8532000 23347200>;
+		};
+	};
+
 	memory@80000000 {
 		device_type = "memory";
 		/* We expect the bootloader to fill in the size */
@@ -498,9 +658,15 @@
 			#power-domain-cells = <1>;
 		};
 
-		qfprom@784000 {
+		qfprom: efuse@784000 {
 			compatible = "qcom,qfprom";
-			reg = <0 0x00784000 0 0x8ff>;
+			reg = <0 0x00784000 0 0x8ff>,
+			      <0 0x00780000 0 0x7a0>,
+			      <0 0x00782000 0 0x100>,
+			      <0 0x00786000 0 0x1fff>;
+
+			clocks = <&gcc GCC_SEC_CTRL_CLK_SRC>;
+			clock-names = "core";
 			#address-cells = <1>;
 			#size-cells = <1>;
 
@@ -524,6 +690,8 @@
 			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
 					<&gcc GCC_SDCC1_AHB_CLK>;
 			clock-names = "core", "iface";
+			power-domains = <&rpmhpd SC7180_CX>;
+			operating-points-v2 = <&sdhc1_opp_table>;
 
 			bus-width = <8>;
 			non-removable;
@@ -535,6 +703,39 @@
 			mmc-hs400-enhanced-strobe;
 
 			status = "disabled";
+
+			sdhc1_opp_table: sdhc1-opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-384000000 {
+					opp-hz = /bits/ 64 <384000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+			};
+		};
+
+		qup_opp_table: qup-opp-table {
+			compatible = "operating-points-v2";
+
+			opp-75000000 {
+				opp-hz = /bits/ 64 <75000000>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+			};
+
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+				required-opps = <&rpmhpd_opp_svs>;
+			};
+
+			opp-128000000 {
+				opp-hz = /bits/ 64 <128000000>;
+				required-opps = <&rpmhpd_opp_nom>;
+			};
 		};
 
 		qupv3_id_0: geniqup@8c0000 {
@@ -547,6 +748,8 @@
 			#size-cells = <2>;
 			ranges;
 			iommus = <&apps_smmu 0x43 0x0>;
+			interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>;
+			interconnect-names = "qup-core";
 			status = "disabled";
 
 			i2c0: i2c@880000 {
@@ -559,6 +762,11 @@
 				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>,
+						<&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
 				status = "disabled";
 			};
 
@@ -572,6 +780,11 @@
 				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 
@@ -583,6 +796,11 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart0_default>;
 				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 
@@ -596,6 +814,11 @@
 				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>,
+						<&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
 				status = "disabled";
 			};
 
@@ -609,6 +832,11 @@
 				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 
@@ -620,6 +848,11 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart1_default>;
 				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 
@@ -633,6 +866,11 @@
 				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>,
+						<&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
 				status = "disabled";
 			};
 
@@ -644,6 +882,11 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart2_default>;
 				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 
@@ -657,6 +900,11 @@
 				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>,
+						<&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
 				status = "disabled";
 			};
 
@@ -670,6 +918,11 @@
 				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 
@@ -681,6 +934,11 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart3_default>;
 				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 
@@ -694,6 +952,11 @@
 				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>,
+						<&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
 				status = "disabled";
 			};
 
@@ -705,6 +968,11 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart4_default>;
 				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 
@@ -718,6 +986,11 @@
 				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>,
+						<&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
 				status = "disabled";
 			};
 
@@ -731,6 +1004,11 @@
 				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 
@@ -742,6 +1020,11 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart5_default>;
 				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 		};
@@ -756,6 +1039,8 @@
 			#size-cells = <2>;
 			ranges;
 			iommus = <&apps_smmu 0x4c3 0x0>;
+			interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>;
+			interconnect-names = "qup-core";
 			status = "disabled";
 
 			i2c6: i2c@a80000 {
@@ -768,6 +1053,11 @@
 				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>,
+						<&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
 				status = "disabled";
 			};
 
@@ -781,6 +1071,11 @@
 				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 
@@ -792,6 +1087,11 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart6_default>;
 				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 
@@ -805,6 +1105,11 @@
 				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>,
+						<&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
 				status = "disabled";
 			};
 
@@ -816,6 +1121,11 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart7_default>;
 				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 
@@ -829,6 +1139,11 @@
 				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>,
+						<&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
 				status = "disabled";
 			};
 
@@ -842,6 +1157,11 @@
 				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 
@@ -853,6 +1173,11 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart8_default>;
 				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 
@@ -866,6 +1191,11 @@
 				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>,
+						<&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
 				status = "disabled";
 			};
 
@@ -877,6 +1207,11 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart9_default>;
 				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 
@@ -890,6 +1225,11 @@
 				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>,
+						<&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
 				status = "disabled";
 			};
 
@@ -903,6 +1243,11 @@
 				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 
@@ -914,6 +1259,11 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart10_default>;
 				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 
@@ -927,6 +1277,11 @@
 				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>,
+						<&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>;
+				interconnect-names = "qup-core", "qup-config",
+							"qup-memory";
 				status = "disabled";
 			};
 
@@ -940,6 +1295,11 @@
 				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 
@@ -951,6 +1311,11 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart11_default>;
 				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SC7180_CX>;
+				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>,
+						<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>;
+				interconnect-names = "qup-core", "qup-config";
 				status = "disabled";
 			};
 		};
@@ -1459,6 +1824,57 @@
 			};
 		};
 
+		remoteproc_mpss: remoteproc@4080000 {
+			compatible = "qcom,sc7180-mpss-pas";
+			reg = <0 0x04080000 0 0x4040>, <0 0x04180000 0 0x48>;
+			reg-names = "qdsp6", "rmb";
+
+			interrupts-extended = <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover",
+					  "stop-ack", "shutdown-ack";
+
+			clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+				 <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>,
+				 <&gcc GCC_MSS_NAV_AXI_CLK>,
+				 <&gcc GCC_MSS_SNOC_AXI_CLK>,
+				 <&gcc GCC_MSS_MFAB_AXIS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface", "bus", "nav", "snoc_axi",
+				      "mnoc_axi", "xo";
+
+			power-domains = <&aoss_qmp AOSS_QMP_LS_MODEM>,
+					<&rpmhpd SC7180_CX>,
+					<&rpmhpd SC7180_MX>,
+					<&rpmhpd SC7180_MSS>;
+			power-domain-names = "load_state", "cx", "mx", "mss";
+
+			memory-region = <&mpss_mem>;
+
+			qcom,smem-states = <&modem_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			resets = <&aoss_reset AOSS_CC_MSS_RESTART>,
+				 <&pdc_reset PDC_MODEM_SYNC_RESET>;
+			reset-names = "mss_restart", "pdc_reset";
+
+			qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>;
+			qcom,spare-regs = <&tcsr_regs 0xb3e4>;
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
+				label = "modem";
+				qcom,remote-pid = <1>;
+				mboxes = <&apss_shared 12>;
+			};
+		};
+
 		gpu: gpu@5000000 {
 			compatible = "qcom,adreno-618.0", "qcom,adreno";
 			#stream-id-cells = <16>;
@@ -1470,42 +1886,52 @@
 			operating-points-v2 = <&gpu_opp_table>;
 			qcom,gmu = <&gmu>;
 
+			interconnects = <&gem_noc MASTER_GFX3D &mc_virt SLAVE_EBI1>;
+			interconnect-names = "gfx-mem";
+
 			gpu_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
 				opp-800000000 {
 					opp-hz = /bits/ 64 <800000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					opp-peak-kBps = <8532000>;
 				};
 
 				opp-650000000 {
 					opp-hz = /bits/ 64 <650000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					opp-peak-kBps = <7216000>;
 				};
 
 				opp-565000000 {
 					opp-hz = /bits/ 64 <565000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					opp-peak-kBps = <5412000>;
 				};
 
 				opp-430000000 {
 					opp-hz = /bits/ 64 <430000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					opp-peak-kBps = <5412000>;
 				};
 
 				opp-355000000 {
 					opp-hz = /bits/ 64 <355000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					opp-peak-kBps = <3072000>;
 				};
 
 				opp-267000000 {
 					opp-hz = /bits/ 64 <267000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					opp-peak-kBps = <3072000>;
 				};
 
 				opp-180000000 {
 					opp-hz = /bits/ 64 <180000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					opp-peak-kBps = <1804000>;
 				};
 			};
 		};
@@ -1711,6 +2137,7 @@
 		etr@6048000 {
 			compatible = "arm,coresight-tmc", "arm,primecell";
 			reg = <0 0x06048000 0 0x1000>;
+			iommus = <&apps_smmu 0x04a0 0x20>;
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
@@ -1783,6 +2210,7 @@
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
+			qcom,replicator-loses-context;
 
 			out-ports {
 				port {
@@ -1810,6 +2238,7 @@
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
 
 			out-ports {
 				port {
@@ -1829,6 +2258,7 @@
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
 
 			out-ports {
 				port {
@@ -1848,6 +2278,7 @@
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
 
 			out-ports {
 				port {
@@ -1867,6 +2298,7 @@
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
 
 			out-ports {
 				port {
@@ -1886,6 +2318,7 @@
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
 
 			out-ports {
 				port {
@@ -1905,6 +2338,7 @@
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
 
 			out-ports {
 				port {
@@ -1924,6 +2358,7 @@
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
 
 			out-ports {
 				port {
@@ -1943,6 +2378,7 @@
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
 			arm,coresight-loses-context-with-cpu;
+			qcom,skip-power-up;
 
 			out-ports {
 				port {
@@ -2054,57 +2490,6 @@
 			};
 		};
 
-		remoteproc_mpss: remoteproc@4080000 {
-			compatible = "qcom,sc7180-mpss-pas";
-			reg = <0 0x04080000 0 0x4040>, <0 0x04180000 0 0x48>;
-			reg-names = "qdsp6", "rmb";
-
-			interrupts-extended = <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>,
-					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
-					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
-					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
-					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
-					      <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "wdog", "fatal", "ready", "handover",
-					  "stop-ack", "shutdown-ack";
-
-			clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
-				 <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>,
-				 <&gcc GCC_MSS_NAV_AXI_CLK>,
-				 <&gcc GCC_MSS_SNOC_AXI_CLK>,
-				 <&gcc GCC_MSS_MFAB_AXIS_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>;
-			clock-names = "iface", "bus", "nav", "snoc_axi",
-				      "mnoc_axi", "xo";
-
-			power-domains = <&aoss_qmp AOSS_QMP_LS_MODEM>,
-					<&rpmhpd SC7180_CX>,
-					<&rpmhpd SC7180_MX>,
-					<&rpmhpd SC7180_MSS>;
-			power-domain-names = "load_state", "cx", "mx", "mss";
-
-			memory-region = <&mpss_mem>;
-
-			qcom,smem-states = <&modem_smp2p_out 0>;
-			qcom,smem-state-names = "stop";
-
-			resets = <&aoss_reset AOSS_CC_MSS_RESTART>,
-				 <&pdc_reset PDC_MODEM_SYNC_RESET>;
-			reset-names = "mss_restart", "pdc_reset";
-
-			qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>;
-			qcom,spare-regs = <&tcsr_regs 0xb3e4>;
-
-			status = "disabled";
-
-			glink-edge {
-				interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
-				label = "modem";
-				qcom,remote-pid = <1>;
-				mboxes = <&apss_shared 12>;
-			};
-		};
-
 		sdhc_2: sdhci@8804000 {
 			compatible = "qcom,sc7180-sdhci", "qcom,sdhci-msm-v5";
 			reg = <0 0x08804000 0 0x1000>;
@@ -2117,10 +2502,45 @@
 			clocks = <&gcc GCC_SDCC2_APPS_CLK>,
 					<&gcc GCC_SDCC2_AHB_CLK>;
 			clock-names = "core", "iface";
+			power-domains = <&rpmhpd SC7180_CX>;
+			operating-points-v2 = <&sdhc2_opp_table>;
 
 			bus-width = <4>;
 
 			status = "disabled";
+
+			sdhc2_opp_table: sdhc2-opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-202000000 {
+					opp-hz = /bits/ 64 <202000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+			};
+		};
+
+		qspi_opp_table: qspi-opp-table {
+			compatible = "operating-points-v2";
+
+			opp-75000000 {
+				opp-hz = /bits/ 64 <75000000>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+			};
+
+			opp-150000000 {
+				opp-hz = /bits/ 64 <150000000>;
+				required-opps = <&rpmhpd_opp_svs>;
+			};
+
+			opp-300000000 {
+				opp-hz = /bits/ 64 <300000000>;
+				required-opps = <&rpmhpd_opp_nom>;
+			};
 		};
 
 		qspi: spi@88dc000 {
@@ -2132,6 +2552,11 @@
 			clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
 				 <&gcc GCC_QSPI_CORE_CLK>;
 			clock-names = "iface", "core";
+			interconnects = <&gem_noc MASTER_APPSS_PROC
+					&config_noc SLAVE_QSPI_0>;
+			interconnect-names = "qspi-config";
+			power-domains = <&rpmhpd SC7180_CX>;
+			operating-points-v2 = <&qspi_opp_table>;
 			status = "disabled";
 		};
 
@@ -2257,6 +2682,7 @@
 				snps,dis_enblslpm_quirk;
 				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
 				phy-names = "usb2-phy", "usb3-phy";
+				maximum-speed = "super-speed";
 			};
 		};
 
@@ -2355,6 +2781,8 @@
 						       <19200000>,
 						       <19200000>,
 						       <19200000>;
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&rpmhpd SC7180_CX>;
 
 				interrupt-parent = <&mdss>;
 				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
@@ -2372,6 +2800,31 @@
 						};
 					};
 				};
+
+				mdp_opp_table: mdp-opp-table {
+					compatible = "operating-points-v2";
+
+					opp-200000000 {
+						opp-hz = /bits/ 64 <200000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-345000000 {
+						opp-hz = /bits/ 64 <345000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-460000000 {
+						opp-hz = /bits/ 64 <460000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+
 			};
 
 			dsi0: dsi@ae94000 {
@@ -2395,6 +2848,9 @@
 					      "iface",
 					      "bus";
 
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmhpd SC7180_CX>;
+
 				phys = <&dsi_phy>;
 				phy-names = "dsi";
 
@@ -2420,6 +2876,25 @@
 						};
 					};
 				};
+
+				dsi_opp_table: dsi-opp-table {
+					compatible = "operating-points-v2";
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-358000000 {
+						opp-hz = /bits/ 64 <358000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+				};
 			};
 
 			dsi_phy: dsi-phy@ae94400 {
@@ -2814,6 +3289,29 @@
 
 			#freq-domain-cells = <1>;
 		};
+
+		wifi: wifi@18800000 {
+			compatible = "qcom,wcn3990-wifi";
+			reg = <0 0x18800000 0 0x800000>;
+			reg-names = "membase";
+			iommus = <&apps_smmu 0xc0 0x1>;
+			interrupts =
+				<GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH /* CE0 */ >,
+				<GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH /* CE1 */ >,
+				<GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH /* CE2 */ >,
+				<GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH /* CE3 */ >,
+				<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH /* CE4 */ >,
+				<GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH /* CE5 */ >,
+				<GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH /* CE6 */ >,
+				<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH /* CE7 */ >,
+				<GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH /* CE8 */ >,
+				<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH /* CE9 */ >,
+				<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH /* CE10 */>,
+				<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH /* CE11 */>;
+			memory-region = <&wlan_mem>;
+			qcom,msa-fixed-perm;
+			status = "disabled";
+		};
 	};
 
 	thermal-zones {
diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts
new file mode 100644
index 000000000000..46a7f2b26e6b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Martin Botka
+ */
+
+/dts-v1/;
+
+#include "sdm630-sony-xperia-ganges.dtsi"
+
+/ {
+	model = "Sony Xperia 10";
+	compatible = "sony,kirin-row", "qcom,sdm630";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges.dtsi
new file mode 100644
index 000000000000..cf2e8b5d60e8
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges.dtsi
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Martin Botka
+ */
+
+/dts-v1/;
+
+/* Ganges is very similar to Nile, but
+ * there are some differences that will need
+ * to be addresed when more peripherals are
+ * enabled upstream. Hence the separate DTSI.
+ */
+#include "sdm630-sony-xperia-nile.dtsi"
+
+/ {
+	chosen {
+		framebuffer@9d400000 {
+			reg = <0 0x9d400000 0 (2520 * 1080 * 4)>;
+			height = <2520>;
+		};
+	};
+
+	/* Yes, this is intentional.
+	 * Ganges devices only use gpio-keys for
+	 * Volume Down, but currently there's an
+	 * issue with it that has to be resolved.
+	 * Until then, let's not make the kernel panic
+	 */
+	/delete-node/ gpio-keys;
+
+	soc {
+
+		i2c@c175000 {
+			status = "okay";
+
+			/* Novatek touchscreen */
+		};
+	};
+
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dts b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dts
new file mode 100644
index 000000000000..8fca0b69fa01
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+/dts-v1/;
+
+#include "sdm630-sony-xperia-nile.dtsi"
+
+/ {
+	model = "Sony Xperia XA2 Ultra";
+	compatible = "sony,discovery-row", "qcom,sdm630";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dts b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dts
new file mode 100644
index 000000000000..90dcd4ebaaed
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+/dts-v1/;
+
+#include "sdm630-sony-xperia-nile.dtsi"
+
+/ {
+	model = "Sony Xperia XA2";
+	compatible = "sony,pioneer-row", "qcom,sdm630";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dts b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dts
new file mode 100644
index 000000000000..fae5f1bb6834
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+/dts-v1/;
+
+#include "sdm630-sony-xperia-nile.dtsi"
+
+/ {
+	model = "Sony Xperia XA2 Plus";
+	compatible = "sony,voyager-row", "qcom,sdm630";
+
+	chosen {
+		framebuffer@9d400000 {
+			reg = <0 0x9d400000 0 (2160 * 1080 * 4)>;
+			height = <2160>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
new file mode 100644
index 000000000000..9ba359c848d0
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+/dts-v1/;
+
+#include "sdm630.dtsi"
+#include "pm660.dtsi"
+#include "pm660l.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/input/gpio-keys.h>
+
+/ {
+	/* required for bootloader to select correct board */
+	qcom,msm-id = <318 0>;
+	qcom,board-id = <8 1>;
+	qcom,pmic-id = <0x1001b 0x101011a 0x00 0x00 0x1001b 0x201011a 0x00 0x00>;
+
+	/* This part enables graphical output via bootloader-enabled display */
+	chosen {
+		bootargs = "earlycon=tty0 console=tty0";
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "framebuffer0";
+
+		framebuffer0: framebuffer@9d400000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x9d400000 0 (1920 * 1080 * 4)>;
+			width = <1080>;
+			height = <1920>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+			status= "okay";
+		};
+	};
+
+	gpio_keys {
+		status = "okay";
+		compatible = "gpio-keys";
+		input-name = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+
+		camera_focus {
+			label = "Camera Focus";
+			gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA_FOCUS>;
+			debounce-interval = <15>;
+		};
+
+		camera_snapshot {
+			label = "Camera Snapshot";
+			gpios = <&tlmm 113 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA>;
+			debounce-interval = <15>;
+		};
+
+		vol_down {
+			label = "Volume Down";
+			gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpio-key,wakeup;
+			debounce-interval = <15>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ramoops@ffc00000 {
+			compatible = "ramoops";
+			reg = <0x0 0xffc00000 0x0 0x100000>;
+			record-size = <0x10000>;
+			console-size = <0x60000>;
+			ftrace-size = <0x10000>;
+			pmsg-size = <0x20000>;
+			ecc-size = <16>;
+			status = "okay";
+		};
+
+		debug_region@ffb00000 {
+			reg = <0x00 0xffb00000 0x00 0x100000>;
+			no-map;
+		};
+
+		removed_region@85800000 {
+			reg = <0x00 0x85800000 0x00 0x3700000>;
+			no-map;
+		};
+	};
+
+	soc {
+		sdhci@c0c4000 {
+			status = "okay";
+
+			mmc-ddr-1_8v;
+			/* SoMC Nile platform's eMMC doesn't support HS200 mode */
+			mmc-hs400-1_8v;
+		};
+
+		i2c@c175000 {
+			status = "okay";
+
+			/* Synaptics touchscreen */
+		};
+
+		i2c@c176000 {
+			status = "okay";
+
+			/* SMB1351 charger */
+		};
+
+		serial@c1af000 {
+			status = "okay";
+		};
+
+		/* I2C3, 4, 5, 7 and 8 are disabled on this board. */
+
+		i2c@c1b6000 {
+			status = "okay";
+
+			/* NXP NFC */
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
new file mode 100644
index 000000000000..88efe8200c80
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -0,0 +1,1174 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+#include <dt-bindings/clock/qcom,gcc-sdm660.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		xo_board: xo_board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+			clock-output-names = "xo_board";
+		};
+
+		sleep_clk: sleep_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32764>;
+			clock-output-names = "sleep_clk";
+		};
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		CPU0: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x100>;
+			enable-method = "psci";
+			cpu-idle-states = <&PERF_CPU_SLEEP_0
+						&PERF_CPU_SLEEP_1
+						&PERF_CLUSTER_SLEEP_0
+						&PERF_CLUSTER_SLEEP_1
+						&PERF_CLUSTER_SLEEP_2>;
+			capacity-dmips-mhz = <1126>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_1>;
+			L2_1: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+			};
+		};
+
+		CPU1: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x101>;
+			enable-method = "psci";
+			cpu-idle-states = <&PERF_CPU_SLEEP_0
+						&PERF_CPU_SLEEP_1
+						&PERF_CLUSTER_SLEEP_0
+						&PERF_CLUSTER_SLEEP_1
+						&PERF_CLUSTER_SLEEP_2>;
+			capacity-dmips-mhz = <1126>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_1>;
+		};
+
+		CPU2: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x102>;
+			enable-method = "psci";
+			cpu-idle-states = <&PERF_CPU_SLEEP_0
+						&PERF_CPU_SLEEP_1
+						&PERF_CLUSTER_SLEEP_0
+						&PERF_CLUSTER_SLEEP_1
+						&PERF_CLUSTER_SLEEP_2>;
+			capacity-dmips-mhz = <1126>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_1>;
+		};
+
+		CPU3: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x103>;
+			enable-method = "psci";
+			cpu-idle-states = <&PERF_CPU_SLEEP_0
+						&PERF_CPU_SLEEP_1
+						&PERF_CLUSTER_SLEEP_0
+						&PERF_CLUSTER_SLEEP_1
+						&PERF_CLUSTER_SLEEP_2>;
+			capacity-dmips-mhz = <1126>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_1>;
+		};
+
+		CPU4: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			cpu-idle-states = <&PWR_CPU_SLEEP_0
+						&PWR_CPU_SLEEP_1
+						&PWR_CLUSTER_SLEEP_0
+						&PWR_CLUSTER_SLEEP_1
+						&PWR_CLUSTER_SLEEP_2>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_0>;
+			L2_0: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+			};
+		};
+
+		CPU5: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			cpu-idle-states = <&PWR_CPU_SLEEP_0
+						&PWR_CPU_SLEEP_1
+						&PWR_CLUSTER_SLEEP_0
+						&PWR_CLUSTER_SLEEP_1
+						&PWR_CLUSTER_SLEEP_2>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU6: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+			cpu-idle-states = <&PWR_CPU_SLEEP_0
+						&PWR_CPU_SLEEP_1
+						&PWR_CLUSTER_SLEEP_0
+						&PWR_CLUSTER_SLEEP_1
+						&PWR_CLUSTER_SLEEP_2>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_0>;
+		};
+
+		CPU7: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+			cpu-idle-states = <&PWR_CPU_SLEEP_0
+						&PWR_CPU_SLEEP_1
+						&PWR_CLUSTER_SLEEP_0
+						&PWR_CLUSTER_SLEEP_1
+						&PWR_CLUSTER_SLEEP_2>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU4>;
+				};
+
+				core1 {
+					cpu = <&CPU5>;
+				};
+
+				core2 {
+					cpu = <&CPU6>;
+				};
+
+				core3 {
+					cpu = <&CPU7>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+
+				core1 {
+					cpu = <&CPU1>;
+				};
+
+				core2 {
+					cpu = <&CPU2>;
+				};
+
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			PWR_CPU_SLEEP_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "pwr-retention";
+				arm,psci-suspend-param = <0x40000002>;
+				entry-latency-us = <338>;
+				exit-latency-us = <423>;
+				min-residency-us = <200>;
+			};
+
+			PWR_CPU_SLEEP_1: cpu-sleep-0-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "pwr-power-collapse";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <515>;
+				exit-latency-us = <1821>;
+				min-residency-us = <1000>;
+				local-timer-stop;
+			};
+
+			PERF_CPU_SLEEP_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "perf-retention";
+				arm,psci-suspend-param = <0x40000002>;
+				entry-latency-us = <154>;
+				exit-latency-us = <87>;
+				min-residency-us = <200>;
+			};
+
+			PERF_CPU_SLEEP_1: cpu-sleep-1-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "perf-power-collapse";
+				arm,psci-suspend-param = <0x40000003>;
+				entry-latency-us = <262>;
+				exit-latency-us = <301>;
+				min-residency-us = <1000>;
+				local-timer-stop;
+			};
+
+			PWR_CLUSTER_SLEEP_0: cluster-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "pwr-cluster-dynamic-retention";
+				arm,psci-suspend-param = <0x400000F2>;
+				entry-latency-us = <284>;
+				exit-latency-us = <384>;
+				min-residency-us = <9987>;
+				local-timer-stop;
+			};
+
+			PWR_CLUSTER_SLEEP_1: cluster-sleep-0-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "pwr-cluster-retention";
+				arm,psci-suspend-param = <0x400000F3>;
+				entry-latency-us = <338>;
+				exit-latency-us = <423>;
+				min-residency-us = <9987>;
+				local-timer-stop;
+			};
+
+			PWR_CLUSTER_SLEEP_2: cluster-sleep-0-2 {
+				compatible = "arm,idle-state";
+				idle-state-name = "pwr-cluster-retention";
+				arm,psci-suspend-param = <0x400000F4>;
+				entry-latency-us = <515>;
+				exit-latency-us = <1821>;
+				min-residency-us = <9987>;
+				local-timer-stop;
+			};
+
+			PERF_CLUSTER_SLEEP_0: cluster-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "perf-cluster-dynamic-retention";
+				arm,psci-suspend-param = <0x400000F2>;
+				entry-latency-us = <272>;
+				exit-latency-us = <329>;
+				min-residency-us = <9987>;
+				local-timer-stop;
+			};
+
+			PERF_CLUSTER_SLEEP_1: cluster-sleep-1-1 {
+				compatible = "arm,idle-state";
+				idle-state-name = "perf-cluster-retention";
+				arm,psci-suspend-param = <0x400000F3>;
+				entry-latency-us = <332>;
+				exit-latency-us = <368>;
+				min-residency-us = <9987>;
+				local-timer-stop;
+			};
+
+			PERF_CLUSTER_SLEEP_2: cluster-sleep-1-2 {
+				compatible = "arm,idle-state";
+				idle-state-name = "perf-cluster-retention";
+				arm,psci-suspend-param = <0x400000F4>;
+				entry-latency-us = <545>;
+				exit-latency-us = <1609>;
+				min-residency-us = <9987>;
+				local-timer-stop;
+			};
+		};
+	};
+
+	firmware {
+		scm {
+			compatible = "qcom,scm-msm8998", "qcom,scm";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0 0 0 0>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		wlan_msa_guard: wlan-msa-guard@85600000 {
+			reg = <0x0 0x85600000 0x0 0x100000>;
+			no-map;
+		};
+
+		wlan_msa_mem: wlan-msa-mem@85700000 {
+			reg = <0x0 0x85700000 0x0 0x100000>;
+			no-map;
+		};
+
+		qhee_code: qhee-code@85800000 {
+			reg = <0x0 0x85800000 0x0 0x3700000>;
+			no-map;
+		};
+
+		smem_region: smem-mem@86000000 {
+			reg = <0 0x86000000 0 0x200000>;
+			no-map;
+		};
+
+		tz_mem: memory@86200000 {
+			reg = <0x0 0x86200000 0x0 0x3300000>;
+			no-map;
+		};
+
+		modem_fw_mem: modem-fw-region@8ac00000 {
+			reg = <0x0 0x8ac00000 0x0 0x7e00000>;
+			no-map;
+		};
+
+		adsp_fw_mem: adsp-fw-region@92a00000 {
+			reg = <0x0 0x92a00000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		pil_mba_mem: pil-mba-region@94800000 {
+			reg = <0x0 0x94800000 0x0 0x200000>;
+			no-map;
+		};
+
+		buffer_mem: buffer-region@94a00000 {
+			reg = <0x0 0x94a00000 0x0 0x100000>;
+			no-map;
+		};
+
+		venus_fw_mem: venus-fw-region@9f800000 {
+			reg = <0x0 0x9f800000 0x0 0x800000>;
+			no-map;
+		};
+
+		secure_region2: secure-region2@f7c00000 {
+			reg = <0x0 0xf7c00000 0x0 0x5c00000>;
+			no-map;
+		};
+
+		adsp_mem: adsp-region@f6000000 {
+			reg = <0x0 0xf6000000 0x0 0x800000>;
+			no-map;
+		};
+
+		qseecom_ta_mem: qseecom-ta-region@fec00000 {
+			reg = <0x0 0xfec00000 0x0 0x1000000>;
+			no-map;
+		};
+
+		qseecom_mem: qseecom-region@f6800000 {
+			reg = <0x0 0xf6800000 0x0 0x1400000>;
+			no-map;
+		};
+
+		secure_display_memory: secure-region@f5c00000 {
+			reg = <0x0 0xf5c00000 0x0 0x5c00000>;
+			no-map;
+		};
+
+		cont_splash_mem: cont-splash-region@9d400000 {
+			reg = <0x0 0x9d400000 0x0 0x23ff000>;
+			no-map;
+		};
+	};
+
+	rpm-glink {
+		compatible = "qcom,glink-rpm";
+
+		interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+		qcom,rpm-msg-ram = <&rpm_msg_ram>;
+		mboxes = <&apcs_glb 0>;
+
+		rpm_requests: rpm-requests {
+			compatible = "qcom,rpm-sdm660";
+			qcom,glink-channels = "rpm_requests";
+
+			rpmcc: clock-controller {
+				compatible = "qcom,rpmcc-sdm660", "qcom,rpmcc";
+				#clock-cells = <1>;
+			};
+		};
+	};
+
+	smem: smem {
+		compatible = "qcom,smem";
+		memory-region = <&smem_region>;
+		hwlocks = <&tcsr_mutex 3>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+		compatible = "simple-bus";
+
+		gcc: clock-controller@100000 {
+			compatible = "qcom,gcc-sdm630";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			reg = <0x00100000 0x94000>;
+
+			clock-names = "xo", "sleep_clk";
+			clocks = <&xo_board>,
+					<&sleep_clk>;
+		};
+
+		rpm_msg_ram: memory@778000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0x00778000 0x7000>;
+		};
+
+		qfprom: qfprom@780000 {
+			compatible = "qcom,qfprom";
+			reg = <0x00780000 0x621c>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
+		rng: rng@793000 {
+			compatible = "qcom,prng-ee";
+			reg = <0x00793000 0x1000>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		restart@10ac000 {
+			compatible = "qcom,pshold";
+			reg = <0x010ac000 0x4>;
+		};
+
+		anoc2_smmu: iommu@16c0000 {
+			compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2";
+			reg = <0x016c0000 0x40000>;
+			#iommu-cells = <1>;
+
+			#global-interrupts = <2>;
+			interrupts =
+				<GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
+
+				<GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 374 IRQ_TYPE_LEVEL_LOW>,
+				<GIC_SPI 375 IRQ_TYPE_LEVEL_LOW>,
+				<GIC_SPI 376 IRQ_TYPE_LEVEL_LOW>,
+				<GIC_SPI 377 IRQ_TYPE_LEVEL_LOW>,
+				<GIC_SPI 378 IRQ_TYPE_LEVEL_LOW>,
+				<GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		tcsr_mutex_regs: syscon@1f40000 {
+			compatible = "syscon";
+			reg = <0x01f40000 0x20000>;
+		};
+
+		tlmm: pinctrl@3000000 {
+			compatible = "qcom,sdm630-pinctrl";
+			reg = <0x03000000 0xc00000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <0x2>;
+			interrupt-controller;
+			#interrupt-cells = <0x2>;
+
+			blsp1_uart1_default: blsp1-uart1-default {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_uart1_sleep: blsp1-uart1-sleep {
+				pins = "gpio0", "gpio1", "gpio2", "gpio3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp1_uart2_default: blsp1-uart2-default {
+				pins = "gpio4", "gpio5";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_uart1_tx_active: blsp2-uart1-tx-active {
+				pins = "gpio16";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_uart1_tx_sleep: blsp2-uart1-tx-sleep {
+				pins = "gpio16";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			blsp2_uart1_rxcts_active: blsp2-uart1-rxcts-active {
+				pins = "gpio17", "gpio18";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_uart1_rxcts_sleep: blsp2-uart1-rxcts-sleep {
+				pins = "gpio17", "gpio18";
+				drive-strength = <2>;
+				bias-no-pull;
+			};
+
+			blsp2_uart1_rfr_active: blsp2-uart1-rfr-active {
+				pins = "gpio19";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			blsp2_uart1_rfr_sleep: blsp2-uart1-rfr-sleep {
+				pins = "gpio19";
+				drive-strength = <2>;
+				bias-no-pull;
+			};
+
+			i2c1_default: i2c1-default {
+				pins = "gpio2", "gpio3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c1_sleep: i2c1-sleep {
+				pins = "gpio2", "gpio3";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			i2c2_default: i2c2-default {
+				pins = "gpio6", "gpio7";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c2_sleep: i2c2-sleep {
+				pins = "gpio6", "gpio7";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			i2c3_default: i2c3-default {
+				pins = "gpio10", "gpio11";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c3_sleep: i2c3-sleep {
+				pins = "gpio10", "gpio11";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			i2c4_default: i2c4-default {
+				pins = "gpio14", "gpio15";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c4_sleep: i2c4-sleep {
+				pins = "gpio14", "gpio15";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			i2c5_default: i2c5-default {
+				pins = "gpio18", "gpio19";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c5_sleep: i2c5-sleep {
+				pins = "gpio18", "gpio19";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			i2c6_default: i2c6-default {
+				pins = "gpio22", "gpio23";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c6_sleep: i2c6-sleep {
+				pins = "gpio22", "gpio23";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			i2c7_default: i2c7-default {
+				pins = "gpio26", "gpio27";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c7_sleep: i2c7-sleep {
+				pins = "gpio26", "gpio27";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			i2c8_default: i2c8-default {
+				pins = "gpio30", "gpio31";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c8_sleep: i2c8-sleep {
+				pins = "gpio30", "gpio31";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			sdc1_clk_on: sdc1-clk-on {
+				pins = "sdc1_clk";
+				bias-disable;
+				drive-strength = <16>;
+			};
+
+			sdc1_clk_off: sdc1-clk-off {
+				pins = "sdc1_clk";
+				bias-disable;
+				drive-strength = <2>;
+			};
+
+			sdc1_cmd_on: sdc1-cmd-on {
+				pins = "sdc1_cmd";
+				bias-pull-up;
+				drive-strength = <10>;
+			};
+
+			sdc1_cmd_off: sdc1-cmd-off {
+				pins = "sdc1_cmd";
+				bias-pull-up;
+				drive-strength = <2>;
+			};
+
+			sdc1_data_on: sdc1-data-on {
+				pins = "sdc1_data";
+				bias-pull-up;
+				drive-strength = <8>;
+			};
+
+			sdc1_data_off: sdc1-data-off {
+				pins = "sdc1_data";
+				bias-pull-up;
+				drive-strength = <2>;
+			};
+
+			sdc1_rclk_on: sdc1-rclk-on {
+				pins = "sdc1_rclk";
+				bias-pull-down;
+			};
+
+			sdc1_rclk_off: sdc1-rclk-off {
+				pins = "sdc1_rclk";
+				bias-pull-down;
+			};
+		};
+
+		kgsl_smmu: iommu@5040000 {
+			compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2";
+			reg = <0x05040000 0x10000>;
+			#iommu-cells = <1>;
+
+			#global-interrupts = <2>;
+			interrupts =
+				<GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
+
+				<GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		lpass_smmu: iommu@5100000 {
+			compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2";
+			reg = <0x05100000 0x40000>;
+			#iommu-cells = <1>;
+
+			#global-interrupts = <2>;
+			interrupts =
+				<GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
+
+				<GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		spmi_bus: spmi@800f000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg =	<0x0800f000 0x1000>,
+				<0x08400000 0x1000000>,
+				<0x09400000 0x1000000>,
+				<0x0a400000 0x220000>,
+				<0x0800a000 0x3000>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			interrupt-controller;
+			#interrupt-cells = <4>;
+			cell-index = <0>;
+		};
+
+		sdhc_1: sdhci@c0c4000 {
+			compatible = "qcom,sdm630-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x0c0c4000 0x1000>,
+				<0x0c0c5000 0x1000>;
+			reg-names = "hc", "cqhci";
+
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
+					<&gcc GCC_SDCC1_AHB_CLK>,
+					<&xo_board>;
+			clock-names = "core", "iface", "xo";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>;
+			pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>;
+
+			bus-width = <8>;
+			non-removable;
+
+			status = "disabled";
+		};
+
+		blsp1_dma: dma@c144000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x0c144000 0x1f000>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			num-channels = <18>;
+			qcom,num-ees = <4>;
+		};
+
+		blsp1_uart1: serial@c16f000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x0c16f000 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 0>, <&blsp1_dma 1>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp1_uart1_default>;
+			pinctrl-1 = <&blsp1_uart1_sleep>;
+			status = "disabled";
+		};
+
+		blsp1_uart2: serial@c170000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x0c170000 0x1000>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp1_dma 2>, <&blsp1_dma 3>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default";
+			pinctrl-0 = <&blsp1_uart2_default>;
+			status = "disabled";
+		};
+
+		blsp_i2c1: i2c@c175000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c175000 0x600>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>,
+					<&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c1_default>;
+			pinctrl-1 = <&i2c1_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c2: i2c@c176000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c176000 0x600>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c2_default>;
+			pinctrl-1 = <&i2c2_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c3: i2c@c177000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c177000 0x600>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c3_default>;
+			pinctrl-1 = <&i2c3_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c4: i2c@c178000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c178000 0x600>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c4_default>;
+			pinctrl-1 = <&i2c4_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp2_dma: dma@c184000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0x0c184000 0x1f000>;
+			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+			qcom,controlled-remotely;
+			num-channels = <18>;
+			qcom,num-ees = <4>;
+		};
+
+		blsp2_uart1: serial@c1af000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x0c1af000 0x200>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP2_UART1_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			dmas = <&blsp2_dma 0>, <&blsp2_dma 1>;
+			dma-names = "tx", "rx";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&blsp2_uart1_tx_active &blsp2_uart1_rxcts_active
+				&blsp2_uart1_rfr_active>;
+			pinctrl-1 = <&blsp2_uart1_tx_sleep &blsp2_uart1_rxcts_sleep
+				&blsp2_uart1_rfr_sleep>;
+			status = "disabled";
+		};
+
+		blsp_i2c5: i2c@c1b5000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c1b5000 0x600>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c5_default>;
+			pinctrl-1 = <&i2c5_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c6: i2c@c1b6000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c1b6000 0x600>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c6_default>;
+			pinctrl-1 = <&i2c6_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c7: i2c@c1b7000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c1b7000 0x600>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c7_default>;
+			pinctrl-1 = <&i2c7_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		blsp_i2c8: i2c@c1b8000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x0c1b8000 0x600>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c8_default>;
+			pinctrl-1 = <&i2c8_sleep>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		mmss_smmu: iommu@cd00000 {
+			compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2";
+			reg = <0x0cd00000 0x40000>;
+			#iommu-cells = <1>;
+
+			#global-interrupts = <2>;
+			interrupts =
+				<GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
+
+				<GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		apcs_glb: mailbox@17911000 {
+			compatible = "qcom,sdm660-apcs-hmss-global";
+			reg = <0x17911000 0x1000>;
+
+			#mbox-cells = <1>;
+		};
+
+		timer@17920000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			compatible = "arm,armv7-timer-mem";
+			reg = <0x17920000 0x1000>;
+			clock-frequency = <19200000>;
+
+			frame@17921000 {
+				frame-number = <0>;
+				interrupts = <0 8 0x4>,
+						<0 7 0x4>;
+				reg = <0x17921000 0x1000>,
+					<0x17922000 0x1000>;
+			};
+
+			frame@17923000 {
+				frame-number = <1>;
+				interrupts = <0 9 0x4>;
+				reg = <0x17923000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17924000 {
+				frame-number = <2>;
+				interrupts = <0 10 0x4>;
+				reg = <0x17924000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17925000 {
+				frame-number = <3>;
+				interrupts = <0 11 0x4>;
+				reg = <0x17925000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17926000 {
+				frame-number = <4>;
+				interrupts = <0 12 0x4>;
+				reg = <0x17926000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17927000 {
+				frame-number = <5>;
+				interrupts = <0 13 0x4>;
+				reg = <0x17927000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@17928000 {
+				frame-number = <6>;
+				interrupts = <0 14 0x4>;
+				reg = <0x17928000 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		intc: interrupt-controller@17a00000 {
+			compatible = "arm,gic-v3";
+			reg = <0x17a00000 0x10000>,	   /* GICD */
+				  <0x17b00000 0x100000>;	  /* GICR * 8 */
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			interrupt-controller;
+			#redistributor-regions = <1>;
+			redistributor-stride = <0x0 0x20000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	tcsr_mutex: hwlock {
+		compatible = "qcom,tcsr-mutex";
+		syscon = <&tcsr_mutex_regs 0 0x1000>;
+		#hwlock-cells = <1>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 1 0xf08>,
+				 <GIC_PPI 2 0xf08>,
+				 <GIC_PPI 3 0xf08>,
+				 <GIC_PPI 0 0xf08>;
+	};
+};
+
diff --git a/arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts b/arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts
new file mode 100644
index 000000000000..7c0830e6a48c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm636-sony-xperia-ganges-mermaid.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Martin Botka
+ */
+
+/dts-v1/;
+
+/* Mermaid uses sdm636, but it's different ever so slightly
+ * that we can ignore it for the time being. Sony also commonizes
+ * the Ganges platform as a whole in downstream kernels.
+ */
+#include "sdm630-sony-xperia-ganges.dtsi"
+
+/ {
+	model = "Sony Xperia 10 Plus";
+	compatible = "sony,mermaid-row", "qcom,sdm636";
+
+	qcom,msm-id = <345 0>;
+	qcom,pmic-id = <0x1001b 0x101011a 0x00 0x00 0x1001b 0x201011a 0x00 0x00 0x1001b 0x102001a 0x00 0x00>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
index 70466cc4b405..64fc1bfd66fa 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
@@ -634,7 +634,7 @@ ap_ts_i2c: &i2c14 {
 };
 
 &mss_pil {
-	iommus = <&apps_smmu 0x780 0x1>,
+	iommus = <&apps_smmu 0x781 0x0>,
 		 <&apps_smmu 0x724 0x3>;
 };
 
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index c00797bd3b07..a2a98680ccf5 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -74,6 +74,17 @@
 		};
 	};
 
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&lt9611_out>;
+			};
+		};
+	};
+
 	lt9611_1v8: lt9611-vdd18-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "LT9611_1V8";
@@ -382,6 +393,25 @@
 	firmware-name = "qcom/sdm845/cdsp.mdt";
 };
 
+&dsi0 {
+	status = "okay";
+	vdda-supply = <&vreg_l26a_1p2>;
+
+	ports {
+		port@1 {
+			endpoint {
+				remote-endpoint = <&lt9611_a>;
+				data-lanes = <0 1 2 3>;
+			};
+		};
+	};
+};
+
+&dsi0_phy {
+	status = "okay";
+	vdds-supply = <&vreg_l1a_0p875>;
+};
+
 &gcc {
 	protected-clocks = <GCC_QSPI_CORE_CLK>,
 			   <GCC_QSPI_CORE_CLK_SRC>,
@@ -395,6 +425,48 @@
 	};
 };
 
+&i2c10 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	lt9611_codec: hdmi-bridge@3b {
+		compatible = "lontium,lt9611";
+		reg = <0x3b>;
+		#sound-dai-cells = <1>;
+
+		interrupts-extended = <&tlmm 84 IRQ_TYPE_EDGE_FALLING>;
+
+		reset-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>;
+
+		vdd-supply = <&lt9611_1v8>;
+		vcc-supply = <&lt9611_3v3>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lt9611_irq_pin>, <&dsi_sw_sel>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lt9611_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lt9611_a: endpoint {
+					remote-endpoint = <&dsi0_out>;
+				};
+			};
+		};
+	};
+};
+
 &i2c11 {
 	/* On Low speed expansion */
 	label = "LS-I2C1";
@@ -407,6 +479,14 @@
 	status = "okay";
 };
 
+&mdss {
+	status = "okay";
+};
+
+&mdss_mdp {
+	status = "okay";
+};
+
 &mss_pil {
 	status = "okay";
 	firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn";
@@ -612,6 +692,21 @@
 		};
 	};
 
+	hdmi-dai-link {
+		link-name = "HDMI Playback";
+		cpu {
+			sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai =  <&lt9611_codec 0>;
+		};
+	};
+
 	slim-dai-link {
 		link-name = "SLIM Playback";
 		cpu {
@@ -686,6 +781,21 @@
 		};
 	};
 
+	dsi_sw_sel: dsi-sw-sel {
+		pins = "gpio120";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+
+	lt9611_irq_pin: lt9611-irq {
+		pins = "gpio84";
+		function = "gpio";
+		bias-disable;
+	};
+
 	pcie0_default_state: pcie0-default {
 		clkreq {
 			pins = "gpio36";
@@ -943,6 +1053,14 @@
 	};
 };
 
+&qup_i2c10_default {
+	pinconf {
+		pins = "gpio55", "gpio56";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
 &qup_uart6_default {
 	pinmux {
 		pins = "gpio45", "gpio46", "gpio47", "gpio48";
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 8eb5a31346d2..2884577dcb77 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -12,6 +12,7 @@
 #include <dt-bindings/clock/qcom,lpass-sdm845.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/clock/qcom,videocc-sdm845.h>
+#include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sdm845.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/phy/phy-qcom-qusb2.h>
@@ -198,6 +199,9 @@
 			capacity-dmips-mhz = <607>;
 			dynamic-power-coefficient = <100>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			next-level-cache = <&L2_0>;
 			L2_0: l2-cache {
@@ -220,6 +224,9 @@
 			capacity-dmips-mhz = <607>;
 			dynamic-power-coefficient = <100>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			next-level-cache = <&L2_100>;
 			L2_100: l2-cache {
@@ -239,6 +246,9 @@
 			capacity-dmips-mhz = <607>;
 			dynamic-power-coefficient = <100>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			next-level-cache = <&L2_200>;
 			L2_200: l2-cache {
@@ -258,6 +268,9 @@
 			capacity-dmips-mhz = <607>;
 			dynamic-power-coefficient = <100>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			next-level-cache = <&L2_300>;
 			L2_300: l2-cache {
@@ -277,6 +290,9 @@
 					   &CLUSTER_SLEEP_0>;
 			dynamic-power-coefficient = <396>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			next-level-cache = <&L2_400>;
 			L2_400: l2-cache {
@@ -296,6 +312,9 @@
 					   &CLUSTER_SLEEP_0>;
 			dynamic-power-coefficient = <396>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			next-level-cache = <&L2_500>;
 			L2_500: l2-cache {
@@ -315,6 +334,9 @@
 					   &CLUSTER_SLEEP_0>;
 			dynamic-power-coefficient = <396>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			next-level-cache = <&L2_600>;
 			L2_600: l2-cache {
@@ -334,6 +356,9 @@
 					   &CLUSTER_SLEEP_0>;
 			dynamic-power-coefficient = <396>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>,
+					<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
 			#cooling-cells = <2>;
 			next-level-cache = <&L2_700>;
 			L2_700: l2-cache {
@@ -433,6 +458,266 @@
 		};
 	};
 
+	cpu0_opp_table: cpu0_opp_table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		cpu0_opp1: opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-peak-kBps = <800000 4800000>;
+		};
+
+		cpu0_opp2: opp-403200000 {
+			opp-hz = /bits/ 64 <403200000>;
+			opp-peak-kBps = <800000 4800000>;
+		};
+
+		cpu0_opp3: opp-480000000 {
+			opp-hz = /bits/ 64 <480000000>;
+			opp-peak-kBps = <800000 6451200>;
+		};
+
+		cpu0_opp4: opp-576000000 {
+			opp-hz = /bits/ 64 <576000000>;
+			opp-peak-kBps = <800000 6451200>;
+		};
+
+		cpu0_opp5: opp-652800000 {
+			opp-hz = /bits/ 64 <652800000>;
+			opp-peak-kBps = <800000 7680000>;
+		};
+
+		cpu0_opp6: opp-748800000 {
+			opp-hz = /bits/ 64 <748800000>;
+			opp-peak-kBps = <1804000 9216000>;
+		};
+
+		cpu0_opp7: opp-825600000 {
+			opp-hz = /bits/ 64 <825600000>;
+			opp-peak-kBps = <1804000 9216000>;
+		};
+
+		cpu0_opp8: opp-902400000 {
+			opp-hz = /bits/ 64 <902400000>;
+			opp-peak-kBps = <1804000 10444800>;
+		};
+
+		cpu0_opp9: opp-979200000 {
+			opp-hz = /bits/ 64 <979200000>;
+			opp-peak-kBps = <1804000 11980800>;
+		};
+
+		cpu0_opp10: opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-peak-kBps = <1804000 11980800>;
+		};
+
+		cpu0_opp11: opp-1132800000 {
+			opp-hz = /bits/ 64 <1132800000>;
+			opp-peak-kBps = <2188000 13516800>;
+		};
+
+		cpu0_opp12: opp-1228800000 {
+			opp-hz = /bits/ 64 <1228800000>;
+			opp-peak-kBps = <2188000 15052800>;
+		};
+
+		cpu0_opp13: opp-1324800000 {
+			opp-hz = /bits/ 64 <1324800000>;
+			opp-peak-kBps = <2188000 16588800>;
+		};
+
+		cpu0_opp14: opp-1420800000 {
+			opp-hz = /bits/ 64 <1420800000>;
+			opp-peak-kBps = <3072000 18124800>;
+		};
+
+		cpu0_opp15: opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-peak-kBps = <3072000 19353600>;
+		};
+
+		cpu0_opp16: opp-1612800000 {
+			opp-hz = /bits/ 64 <1612800000>;
+			opp-peak-kBps = <4068000 19353600>;
+		};
+
+		cpu0_opp17: opp-1689600000 {
+			opp-hz = /bits/ 64 <1689600000>;
+			opp-peak-kBps = <4068000 20889600>;
+		};
+
+		cpu0_opp18: opp-1766400000 {
+			opp-hz = /bits/ 64 <1766400000>;
+			opp-peak-kBps = <4068000 22425600>;
+		};
+	};
+
+	cpu4_opp_table: cpu4_opp_table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		cpu4_opp1: opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-peak-kBps = <800000 4800000>;
+		};
+
+		cpu4_opp2: opp-403200000 {
+			opp-hz = /bits/ 64 <403200000>;
+			opp-peak-kBps = <800000 4800000>;
+		};
+
+		cpu4_opp3: opp-480000000 {
+			opp-hz = /bits/ 64 <480000000>;
+			opp-peak-kBps = <1804000 4800000>;
+		};
+
+		cpu4_opp4: opp-576000000 {
+			opp-hz = /bits/ 64 <576000000>;
+			opp-peak-kBps = <1804000 4800000>;
+		};
+
+		cpu4_opp5: opp-652800000 {
+			opp-hz = /bits/ 64 <652800000>;
+			opp-peak-kBps = <1804000 4800000>;
+		};
+
+		cpu4_opp6: opp-748800000 {
+			opp-hz = /bits/ 64 <748800000>;
+			opp-peak-kBps = <1804000 4800000>;
+		};
+
+		cpu4_opp7: opp-825600000 {
+			opp-hz = /bits/ 64 <825600000>;
+			opp-peak-kBps = <2188000 9216000>;
+		};
+
+		cpu4_opp8: opp-902400000 {
+			opp-hz = /bits/ 64 <902400000>;
+			opp-peak-kBps = <2188000 9216000>;
+		};
+
+		cpu4_opp9: opp-979200000 {
+			opp-hz = /bits/ 64 <979200000>;
+			opp-peak-kBps = <2188000 9216000>;
+		};
+
+		cpu4_opp10: opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-peak-kBps = <3072000 9216000>;
+		};
+
+		cpu4_opp11: opp-1132800000 {
+			opp-hz = /bits/ 64 <1132800000>;
+			opp-peak-kBps = <3072000 11980800>;
+		};
+
+		cpu4_opp12: opp-1209600000 {
+			opp-hz = /bits/ 64 <1209600000>;
+			opp-peak-kBps = <4068000 11980800>;
+		};
+
+		cpu4_opp13: opp-1286400000 {
+			opp-hz = /bits/ 64 <1286400000>;
+			opp-peak-kBps = <4068000 11980800>;
+		};
+
+		cpu4_opp14: opp-1363200000 {
+			opp-hz = /bits/ 64 <1363200000>;
+			opp-peak-kBps = <4068000 15052800>;
+		};
+
+		cpu4_opp15: opp-1459200000 {
+			opp-hz = /bits/ 64 <1459200000>;
+			opp-peak-kBps = <4068000 15052800>;
+		};
+
+		cpu4_opp16: opp-1536000000 {
+			opp-hz = /bits/ 64 <1536000000>;
+			opp-peak-kBps = <5412000 15052800>;
+		};
+
+		cpu4_opp17: opp-1612800000 {
+			opp-hz = /bits/ 64 <1612800000>;
+			opp-peak-kBps = <5412000 15052800>;
+		};
+
+		cpu4_opp18: opp-1689600000 {
+			opp-hz = /bits/ 64 <1689600000>;
+			opp-peak-kBps = <5412000 19353600>;
+		};
+
+		cpu4_opp19: opp-1766400000 {
+			opp-hz = /bits/ 64 <1766400000>;
+			opp-peak-kBps = <6220000 19353600>;
+		};
+
+		cpu4_opp20: opp-1843200000 {
+			opp-hz = /bits/ 64 <1843200000>;
+			opp-peak-kBps = <6220000 19353600>;
+		};
+
+		cpu4_opp21: opp-1920000000 {
+			opp-hz = /bits/ 64 <1920000000>;
+			opp-peak-kBps = <7216000 19353600>;
+		};
+
+		cpu4_opp22: opp-1996800000 {
+			opp-hz = /bits/ 64 <1996800000>;
+			opp-peak-kBps = <7216000 20889600>;
+		};
+
+		cpu4_opp23: opp-2092800000 {
+			opp-hz = /bits/ 64 <2092800000>;
+			opp-peak-kBps = <7216000 20889600>;
+		};
+
+		cpu4_opp24: opp-2169600000 {
+			opp-hz = /bits/ 64 <2169600000>;
+			opp-peak-kBps = <7216000 20889600>;
+		};
+
+		cpu4_opp25: opp-2246400000 {
+			opp-hz = /bits/ 64 <2246400000>;
+			opp-peak-kBps = <7216000 20889600>;
+		};
+
+		cpu4_opp26: opp-2323200000 {
+			opp-hz = /bits/ 64 <2323200000>;
+			opp-peak-kBps = <7216000 20889600>;
+		};
+
+		cpu4_opp27: opp-2400000000 {
+			opp-hz = /bits/ 64 <2400000000>;
+			opp-peak-kBps = <7216000 22425600>;
+		};
+
+		cpu4_opp28: opp-2476800000 {
+			opp-hz = /bits/ 64 <2476800000>;
+			opp-peak-kBps = <7216000 22425600>;
+		};
+
+		cpu4_opp29: opp-2553600000 {
+			opp-hz = /bits/ 64 <2553600000>;
+			opp-peak-kBps = <7216000 22425600>;
+		};
+
+		cpu4_opp30: opp-2649600000 {
+			opp-hz = /bits/ 64 <2649600000>;
+			opp-peak-kBps = <7216000 22425600>;
+		};
+
+		cpu4_opp31: opp-2745600000 {
+			opp-hz = /bits/ 64 <2745600000>;
+			opp-peak-kBps = <7216000 25497600>;
+		};
+
+		cpu4_opp32: opp-2803200000 {
+			opp-hz = /bits/ 64 <2803200000>;
+			opp-peak-kBps = <7216000 25497600>;
+		};
+	};
+
 	pmu {
 		compatible = "arm,armv8-pmuv3";
 		interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
@@ -805,6 +1090,25 @@
 			clock-names = "core";
 		};
 
+		qup_opp_table: qup-opp-table {
+			compatible = "operating-points-v2";
+
+			opp-19200000 {
+				opp-hz = /bits/ 64 <19200000>;
+				required-opps = <&rpmhpd_opp_min_svs>;
+			};
+
+			opp-75000000 {
+				opp-hz = /bits/ 64 <75000000>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+			};
+
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+				required-opps = <&rpmhpd_opp_svs>;
+			};
+		};
+
 		qupv3_id_0: geniqup@8c0000 {
 			compatible = "qcom,geni-se-qup";
 			reg = <0 0x008c0000 0 0x6000>;
@@ -826,6 +1130,8 @@
 				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -850,6 +1156,8 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart0_default>;
 				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -863,6 +1171,8 @@
 				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -887,6 +1197,8 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart1_default>;
 				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -900,6 +1212,8 @@
 				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -924,6 +1238,8 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart2_default>;
 				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -937,6 +1253,8 @@
 				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -961,6 +1279,8 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart3_default>;
 				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -974,6 +1294,8 @@
 				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -998,6 +1320,8 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart4_default>;
 				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -1011,6 +1335,8 @@
 				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -1035,6 +1361,8 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart5_default>;
 				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -1048,6 +1376,8 @@
 				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -1072,6 +1402,8 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart6_default>;
 				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -1085,6 +1417,8 @@
 				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -1109,6 +1443,8 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart7_default>;
 				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 		};
@@ -1134,6 +1470,8 @@
 				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -1158,6 +1496,8 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart8_default>;
 				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -1171,6 +1511,8 @@
 				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -1195,6 +1537,8 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart9_default>;
 				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -1208,6 +1552,8 @@
 				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -1232,6 +1578,8 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart10_default>;
 				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -1245,6 +1593,8 @@
 				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -1269,6 +1619,8 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart11_default>;
 				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -1282,6 +1634,8 @@
 				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -1306,6 +1660,8 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart12_default>;
 				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -1319,6 +1675,8 @@
 				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -1343,6 +1701,8 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart13_default>;
 				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -1356,6 +1716,8 @@
 				interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -1380,6 +1742,8 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart14_default>;
 				interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -1393,6 +1757,8 @@
 				interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -1417,6 +1783,8 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart15_default>;
 				interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
+				power-domains = <&rpmhpd SDM845_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 		};
@@ -1692,7 +2060,9 @@
 		ufs_mem_hc: ufshc@1d84000 {
 			compatible = "qcom,sdm845-ufshc", "qcom,ufshc",
 				     "jedec,ufs-2.0";
-			reg = <0 0x01d84000 0 0x2500>;
+			reg = <0 0x01d84000 0 0x2500>,
+			      <0 0x01d90000 0 0x8000>;
+			reg-names = "std", "ice";
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
 			phys = <&ufs_mem_phy_lanes>;
 			phy-names = "ufsphy";
@@ -1712,7 +2082,8 @@
 				"ref_clk",
 				"tx_lane0_sync_clk",
 				"rx_lane0_sync_clk",
-				"rx_lane1_sync_clk";
+				"rx_lane1_sync_clk",
+				"ice_core_clk";
 			clocks =
 				<&gcc GCC_UFS_PHY_AXI_CLK>,
 				<&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
@@ -1721,7 +2092,8 @@
 				<&rpmhcc RPMH_CXO_CLK>,
 				<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
 				<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
-				<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+				<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>,
+				<&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
 			freq-table-hz =
 				<50000000 200000000>,
 				<0 0>,
@@ -1730,7 +2102,8 @@
 				<0 0>,
 				<0 0>,
 				<0 0>,
-				<0 0>;
+				<0 0>,
+				<0 300000000>;
 
 			status = "disabled";
 		};
@@ -2643,6 +3016,7 @@
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
 
 			out-ports {
 				port {
@@ -2662,6 +3036,7 @@
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
 
 			out-ports {
 				port {
@@ -2681,6 +3056,7 @@
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
 
 			out-ports {
 				port {
@@ -2700,6 +3076,7 @@
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
 
 			out-ports {
 				port {
@@ -2719,6 +3096,7 @@
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
 
 			out-ports {
 				port {
@@ -2738,6 +3116,7 @@
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
 
 			out-ports {
 				port {
@@ -2757,6 +3136,7 @@
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
 
 			out-ports {
 				port {
@@ -2776,6 +3156,7 @@
 
 			clocks = <&aoss_qmp>;
 			clock-names = "apb_pclk";
+			arm,coresight-loses-context-with-cpu;
 
 			out-ports {
 				port {
@@ -2911,8 +3292,58 @@
 				 <&gcc GCC_SDCC2_APPS_CLK>;
 			clock-names = "iface", "core";
 			iommus = <&apps_smmu 0xa0 0xf>;
+			power-domains = <&rpmhpd SDM845_CX>;
+			operating-points-v2 = <&sdhc2_opp_table>;
 
 			status = "disabled";
+
+			sdhc2_opp_table: sdhc2-opp-table {
+				compatible = "operating-points-v2";
+
+				opp-9600000 {
+					opp-hz = /bits/ 64 <9600000>;
+					required-opps = <&rpmhpd_opp_min_svs>;
+				};
+
+				opp-19200000 {
+					opp-hz = /bits/ 64 <19200000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-201500000 {
+					opp-hz = /bits/ 64 <201500000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+			};
+		};
+
+		qspi_opp_table: qspi-opp-table {
+			compatible = "operating-points-v2";
+
+			opp-19200000 {
+				opp-hz = /bits/ 64 <19200000>;
+				required-opps = <&rpmhpd_opp_min_svs>;
+			};
+
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+			};
+
+			opp-150000000 {
+				opp-hz = /bits/ 64 <150000000>;
+				required-opps = <&rpmhpd_opp_svs>;
+			};
+
+			opp-300000000 {
+				opp-hz = /bits/ 64 <300000000>;
+				required-opps = <&rpmhpd_opp_nom>;
+			};
 		};
 
 		qspi: spi@88df000 {
@@ -2924,6 +3355,8 @@
 			clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
 				 <&gcc GCC_QSPI_CORE_CLK>;
 			clock-names = "iface", "core";
+			power-domains = <&rpmhpd SDM845_CX>;
+			operating-points-v2 = <&qspi_opp_table>;
 			status = "disabled";
 		};
 
@@ -3296,6 +3729,35 @@
 			#power-domain-cells = <1>;
 		};
 
+		dsi_opp_table: dsi-opp-table {
+			compatible = "operating-points-v2";
+
+			opp-19200000 {
+				opp-hz = /bits/ 64 <19200000>;
+				required-opps = <&rpmhpd_opp_min_svs>;
+			};
+
+			opp-180000000 {
+				opp-hz = /bits/ 64 <180000000>;
+				required-opps = <&rpmhpd_opp_low_svs>;
+			};
+
+			opp-275000000 {
+				opp-hz = /bits/ 64 <275000000>;
+				required-opps = <&rpmhpd_opp_svs>;
+			};
+
+			opp-328580000 {
+				opp-hz = /bits/ 64 <328580000>;
+				required-opps = <&rpmhpd_opp_svs_l1>;
+			};
+
+			opp-358000000 {
+				opp-hz = /bits/ 64 <358000000>;
+				required-opps = <&rpmhpd_opp_nom>;
+			};
+		};
+
 		mdss: mdss@ae00000 {
 			compatible = "qcom,sdm845-mdss";
 			reg = <0 0x0ae00000 0 0x1000>;
@@ -3340,6 +3802,8 @@
 						  <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
 				assigned-clock-rates = <300000000>,
 						       <19200000>;
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&rpmhpd SDM845_CX>;
 
 				interrupt-parent = <&mdss>;
 				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
@@ -3364,6 +3828,30 @@
 						};
 					};
 				};
+
+				mdp_opp_table: mdp-opp-table {
+					compatible = "operating-points-v2";
+
+					opp-19200000 {
+						opp-hz = /bits/ 64 <19200000>;
+						required-opps = <&rpmhpd_opp_min_svs>;
+					};
+
+					opp-171428571 {
+						opp-hz = /bits/ 64 <171428571>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-344000000 {
+						opp-hz = /bits/ 64 <344000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-430000000 {
+						opp-hz = /bits/ 64 <430000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
 			};
 
 			dsi0: dsi@ae94000 {
@@ -3386,6 +3874,8 @@
 					      "core",
 					      "iface",
 					      "bus";
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmhpd SDM845_CX>;
 
 				phys = <&dsi0_phy>;
 				phy-names = "dsi";
@@ -3450,6 +3940,8 @@
 					      "core",
 					      "iface",
 					      "bus";
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmhpd SDM845_CX>;
 
 				phys = <&dsi1_phy>;
 				phy-names = "dsi";
@@ -3515,42 +4007,52 @@
 
 			qcom,gmu = <&gmu>;
 
+			interconnects = <&mem_noc MASTER_GFX3D &mem_noc SLAVE_EBI1>;
+			interconnect-names = "gfx-mem";
+
 			gpu_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
 				opp-710000000 {
 					opp-hz = /bits/ 64 <710000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					opp-peak-kBps = <7216000>;
 				};
 
 				opp-675000000 {
 					opp-hz = /bits/ 64 <675000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					opp-peak-kBps = <7216000>;
 				};
 
 				opp-596000000 {
 					opp-hz = /bits/ 64 <596000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					opp-peak-kBps = <6220000>;
 				};
 
 				opp-520000000 {
 					opp-hz = /bits/ 64 <520000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					opp-peak-kBps = <6220000>;
 				};
 
 				opp-414000000 {
 					opp-hz = /bits/ 64 <414000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					opp-peak-kBps = <4068000>;
 				};
 
 				opp-342000000 {
 					opp-hz = /bits/ 64 <342000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					opp-peak-kBps = <2724000>;
 				};
 
 				opp-257000000 {
 					opp-hz = /bits/ 64 <257000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					opp-peak-kBps = <1648000>;
 				};
 			};
 		};
@@ -3724,6 +4226,21 @@
 			cell-index = <0>;
 		};
 
+		imem@146bf000 {
+			compatible = "simple-mfd";
+			reg = <0 0x146bf000 0 0x1000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ranges = <0 0 0x146bf000 0x1000>;
+
+			pil-reloc@94c {
+				compatible = "qcom,pil-reloc-info";
+				reg = <0x94c 0xc8>;
+			};
+		};
+
 		apps_smmu: iommu@15000000 {
 			compatible = "qcom,sdm845-smmu-500", "arm,mmu-500";
 			reg = <0 0x15000000 0 0x80000>;
diff --git a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
index 8ab16611ebe8..6c6325c3af59 100644
--- a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
@@ -408,3 +408,24 @@
 	vdda-pll-supply = <&vreg_l3c_1p2>;
 	vdda-pll-max-microamp = <19000>;
 };
+
+&usb_1_hsphy {
+	status = "okay";
+	vdda-pll-supply = <&vdd_usb_hs_core>;
+	vdda33-supply = <&vdda_usb_hs_3p1>;
+	vdda18-supply = <&vdda_usb_hs_1p8>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+	vdda-phy-supply = <&vreg_l3c_1p2>;
+	vdda-pll-supply = <&vdda_usb_ss_dp_core_1>;
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 141c21dfa68c..b86a7ead3006 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -10,6 +10,7 @@
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/clock/qcom,gcc-sm8150.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	interrupt-parent = <&intc>;
@@ -46,6 +47,7 @@
 			enable-method = "psci";
 			next-level-cache = <&L2_0>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
+			#cooling-cells = <2>;
 			L2_0: l2-cache {
 				compatible = "cache";
 				next-level-cache = <&L3_0>;
@@ -62,6 +64,7 @@
 			enable-method = "psci";
 			next-level-cache = <&L2_100>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
+			#cooling-cells = <2>;
 			L2_100: l2-cache {
 				compatible = "cache";
 				next-level-cache = <&L3_0>;
@@ -76,6 +79,7 @@
 			enable-method = "psci";
 			next-level-cache = <&L2_200>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
+			#cooling-cells = <2>;
 			L2_200: l2-cache {
 				compatible = "cache";
 				next-level-cache = <&L3_0>;
@@ -89,6 +93,7 @@
 			enable-method = "psci";
 			next-level-cache = <&L2_300>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
+			#cooling-cells = <2>;
 			L2_300: l2-cache {
 				compatible = "cache";
 				next-level-cache = <&L3_0>;
@@ -102,6 +107,7 @@
 			enable-method = "psci";
 			next-level-cache = <&L2_400>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
+			#cooling-cells = <2>;
 			L2_400: l2-cache {
 				compatible = "cache";
 				next-level-cache = <&L3_0>;
@@ -115,6 +121,7 @@
 			enable-method = "psci";
 			next-level-cache = <&L2_500>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
+			#cooling-cells = <2>;
 			L2_500: l2-cache {
 				compatible = "cache";
 				next-level-cache = <&L3_0>;
@@ -128,6 +135,7 @@
 			enable-method = "psci";
 			next-level-cache = <&L2_600>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
+			#cooling-cells = <2>;
 			L2_600: l2-cache {
 				compatible = "cache";
 				next-level-cache = <&L3_0>;
@@ -141,6 +149,7 @@
 			enable-method = "psci";
 			next-level-cache = <&L2_700>;
 			qcom,freq-domain = <&cpufreq_hw 2>;
+			#cooling-cells = <2>;
 			L2_700: l2-cache {
 				compatible = "cache";
 				next-level-cache = <&L3_0>;
@@ -538,6 +547,141 @@
 			};
 		};
 
+		gpu: gpu@2c00000 {
+			/*
+			 * note: the amd,imageon compatible makes it possible
+			 * to use the drm/msm driver without the display node,
+			 * make sure to remove it when display node is added
+			 */
+			compatible = "qcom,adreno-640.1",
+				     "qcom,adreno",
+				     "amd,imageon";
+			#stream-id-cells = <16>;
+
+			reg = <0 0x02c00000 0 0x40000>;
+			reg-names = "kgsl_3d0_reg_memory";
+
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+
+			iommus = <&adreno_smmu 0 0x401>;
+
+			operating-points-v2 = <&gpu_opp_table>;
+
+			qcom,gmu = <&gmu>;
+
+			zap-shader {
+				memory-region = <&gpu_mem>;
+			};
+
+			/* note: downstream checks gpu binning for 675 Mhz */
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-675000000 {
+					opp-hz = /bits/ 64 <675000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+				};
+
+				opp-585000000 {
+					opp-hz = /bits/ 64 <585000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+				};
+
+				opp-499200000 {
+					opp-hz = /bits/ 64 <499200000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
+				};
+
+				opp-427000000 {
+					opp-hz = /bits/ 64 <427000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+				};
+
+				opp-345000000 {
+					opp-hz = /bits/ 64 <345000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				};
+
+				opp-257000000 {
+					opp-hz = /bits/ 64 <257000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+				};
+			};
+		};
+
+		gmu: gmu@2c6a000 {
+			compatible="qcom,adreno-gmu-640.1", "qcom,adreno-gmu";
+
+			reg = <0 0x02c6a000 0 0x30000>,
+			      <0 0x0b290000 0 0x10000>,
+			      <0 0x0b490000 0 0x10000>;
+			reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq";
+
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hfi", "gmu";
+
+			clocks = <&gpucc 0>,
+				 <&gpucc 3>,
+				 <&gpucc 6>,
+				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>;
+			clock-names = "ahb", "gmu", "cxo", "axi", "memnoc";
+
+			power-domains = <&gpucc 0>,
+					<&gpucc 1>;
+			power-domain-names = "cx", "gx";
+
+			iommus = <&adreno_smmu 5 0x400>;
+
+			operating-points-v2 = <&gmu_opp_table>;
+
+			gmu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+				};
+			};
+		};
+
+		gpucc: clock-controller@2c90000 {
+			compatible = "qcom,sm8150-gpucc";
+			reg = <0 0x02c90000 0 0x9000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+			clock-names = "bi_tcxo",
+				      "gcc_gpu_gpll0_clk_src",
+				      "gcc_gpu_gpll0_div_clk_src";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		adreno_smmu: iommu@2ca0000 {
+			compatible = "qcom,sm8150-smmu-500", "arm,mmu-500";
+			reg = <0 0x02ca0000 0 0x10000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <1>;
+			interrupts = <GIC_SPI 674 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 688 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gpucc 0>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>;
+			clock-names = "ahb", "bus", "iface";
+
+			power-domains = <&gpucc 0>;
+		};
+
 		tlmm: pinctrl@3100000 {
 			compatible = "qcom,sm8150-pinctrl";
 			reg = <0x0 0x03100000 0x0 0x300000>,
@@ -621,6 +765,98 @@
 			};
 		};
 
+		usb_1_hsphy: phy@88e2000 {
+			compatible = "qcom,sm8150-usb-hs-phy",
+							"qcom,usb-snps-hs-7nm-phy";
+			reg = <0 0x088e2000 0 0x400>;
+			status = "disabled";
+			#phy-cells = <0>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+		};
+
+		usb_1_qmpphy: phy@88e9000 {
+			compatible = "qcom,sm8150-qmp-usb3-phy";
+			reg = <0 0x088e9000 0 0x18c>,
+			      <0 0x088e8000 0 0x10>;
+			reg-names = "reg-base", "dp_com";
+			status = "disabled";
+			#clock-cells = <1>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
+			clock-names = "aux", "ref_clk_src", "ref", "com_aux";
+
+			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
+			reset-names = "phy", "common";
+
+			usb_1_ssphy: lanes@88e9200 {
+				reg = <0 0x088e9200 0 0x200>,
+				      <0 0x088e9400 0 0x200>,
+				      <0 0x088e9c00 0 0x218>,
+				      <0 0x088e9600 0 0x200>,
+				      <0 0x088e9800 0 0x200>,
+				      <0 0x088e9a00 0 0x100>;
+				#phy-cells = <0>;
+				clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+				clock-names = "pipe0";
+				clock-output-names = "usb3_phy_pipe_clk_src";
+			};
+		};
+
+		usb_1: usb@a6f8800 {
+			compatible = "qcom,sm8150-dwc3", "qcom,dwc3";
+			reg = <0 0x0a6f8800 0 0x400>;
+			status = "disabled";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			dma-ranges;
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB3_SEC_CLKREF_CLK>;
+			clock-names = "cfg_noc", "core", "iface", "mock_utmi",
+				      "sleep", "xo";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <150000000>;
+
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq", "ss_phy_irq",
+					  "dm_hs_phy_irq", "dp_hs_phy_irq";
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			usb_1_dwc3: dwc3@a600000 {
+				compatible = "snps,dwc3";
+				reg = <0 0x0a600000 0 0xcd00>;
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_enblslpm_quirk;
+				phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
+
 		aoss_qmp: power-controller@c300000 {
 			compatible = "qcom,sm8150-aoss-qmp";
 			reg = <0x0 0x0c300000 0x0 0x100000>;
@@ -631,6 +867,28 @@
 			#power-domain-cells = <1>;
 		};
 
+		tsens0: thermal-sensor@c263000 {
+			compatible = "qcom,sm8150-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c263000 0 0x1ff>, /* TM */
+			      <0 0x0c222000 0 0x1ff>; /* SROT */
+			#qcom,sensors = <16>;
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		tsens1: thermal-sensor@c265000 {
+			compatible = "qcom,sm8150-tsens", "qcom,tsens-v2";
+			reg = <0 0x0c265000 0 0x1ff>, /* TM */
+			      <0 0x0c223000 0 0x1ff>; /* SROT */
+			#qcom,sensors = <8>;
+			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
 		spmi_bus: spmi@c440000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0x0 0x0c440000 0x0 0x0001100>,
@@ -864,4 +1122,784 @@
 			     <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>,
 			     <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>;
 	};
+
+	thermal-zones {
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				cpu0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu0_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu0_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu0_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				cpu1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu1_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu1_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu1_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				cpu2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu2_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu2_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu2_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 4>;
+
+			trips {
+				cpu3_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu3_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu3_alert0>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu3_alert1>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu4-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				cpu4_top_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_top_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_top_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu4_top_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu4_top_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu5-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				cpu5_top_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_top_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_top_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu5_top_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu5_top_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu6-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 9>;
+
+			trips {
+				cpu6_top_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_top_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_top_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu6_top_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu6_top_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu7-top-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 10>;
+
+			trips {
+				cpu7_top_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_top_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_top_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu7_top_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu7_top_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu4-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 11>;
+
+			trips {
+				cpu4_bottom_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_bottom_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu4_bottom_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu4_bottom_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu4_bottom_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu5-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 12>;
+
+			trips {
+				cpu5_bottom_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_bottom_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu5_bottom_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu5_bottom_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu5_bottom_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu6-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 13>;
+
+			trips {
+				cpu6_bottom_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_bottom_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu6_bottom_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu6_bottom_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu6_bottom_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu7-bottom-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 14>;
+
+			trips {
+				cpu7_bottom_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_bottom_alert1: trip-point1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu7_bottom_crit: cpu_crit {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu7_bottom_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+				map1 {
+					trip = <&cpu7_bottom_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		aoss0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 0>;
+
+			trips {
+				aoss0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		cluster0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				cluster0_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cluster0_crit: cluster0_crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cluster1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 6>;
+
+			trips {
+				cluster1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+				cluster1_crit: cluster1_crit {
+					temperature = <110000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu-thermal-top {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 15>;
+
+			trips {
+				gpu1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		aoss1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 0>;
+
+			trips {
+				aoss1_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		wlan-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 1>;
+
+			trips {
+				wlan_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		video-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 2>;
+
+			trips {
+				video_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		mem-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 3>;
+
+			trips {
+				mem_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		q6-hvx-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 4>;
+
+			trips {
+				q6_hvx_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		camera-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 5>;
+
+			trips {
+				camera_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		compute-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 6>;
+
+			trips {
+				compute_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		modem-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 7>;
+
+			trips {
+				modem_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		npu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 8>;
+
+			trips {
+				npu_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		modem-vec-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 9>;
+
+			trips {
+				modem_vec_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		modem-scl-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 10>;
+
+			trips {
+				modem_scl_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		gpu-thermal-bottom {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens1 11>;
+
+			trips {
+				gpu2_alert0: trip-point0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
index cff7a85890ee..6894f8490dae 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
@@ -7,6 +7,10 @@
 
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include "sm8250.dtsi"
+#include "pm8150.dtsi"
+#include "pm8150b.dtsi"
+#include "pm8150l.dtsi"
+#include "pm8009.dtsi"
 
 / {
 	model = "Qualcomm Technologies, Inc. SM8250 MTP";
@@ -51,6 +55,11 @@
 	};
 };
 
+&adsp {
+	status = "okay";
+	firmware-name = "qcom/sm8250/adsp.mbn";
+};
+
 &apps_rsc {
 	pm8150-rpmh-regulators {
 		compatible = "qcom,pm8150-rpmh-regulators";
@@ -136,13 +145,6 @@
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
-		vreg_l11a_0p75: ldo11 {
-			regulator-name = "vreg_l11a_0p75";
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
 		vreg_l12a_1p8: ldo12 {
 			regulator-name = "vreg_l12a_1p8";
 			regulator-min-microvolt = <1800000>;
@@ -351,10 +353,24 @@
 	};
 };
 
+&cdsp {
+	status = "okay";
+	firmware-name = "qcom/sm8250/cdsp.mbn";
+};
+
 &qupv3_id_1 {
 	status = "okay";
 };
 
+&slpi {
+	status = "okay";
+	firmware-name = "qcom/sm8250/slpi.mbn";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <28 4>, <40 4>;
+};
+
 &uart2 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 7050adba7995..377172e8967b 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -6,6 +6,8 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-sm8250.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/power/qcom-aoss-qmp.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 
@@ -15,6 +17,49 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
+		i2c9 = &i2c9;
+		i2c10 = &i2c10;
+		i2c11 = &i2c11;
+		i2c12 = &i2c12;
+		i2c13 = &i2c13;
+		i2c14 = &i2c14;
+		i2c15 = &i2c15;
+		i2c16 = &i2c16;
+		i2c17 = &i2c17;
+		i2c18 = &i2c18;
+		i2c19 = &i2c19;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		spi2 = &spi2;
+		spi3 = &spi3;
+		spi4 = &spi4;
+		spi5 = &spi5;
+		spi6 = &spi6;
+		spi7 = &spi7;
+		spi8 = &spi8;
+		spi9 = &spi9;
+		spi10 = &spi10;
+		spi11 = &spi11;
+		spi12 = &spi12;
+		spi13 = &spi13;
+		spi14 = &spi14;
+		spi15 = &spi15;
+		spi16 = &spi16;
+		spi17 = &spi17;
+		spi18 = &spi18;
+		spi19 = &spi19;
+	};
+
 	chosen { };
 
 	clocks {
@@ -144,12 +189,6 @@
 		};
 	};
 
-	tcsr_mutex: hwlock {
-		compatible = "qcom,tcsr-mutex";
-		syscon = <&tcsr_mutex_regs 0 0x1000>;
-		#hwlock-cells = <1>;
-	};
-
 	memory@80000000 {
 		device_type = "memory";
 		/* We expect the bootloader to fill in the size */
@@ -269,6 +308,78 @@
 		hwlocks = <&tcsr_mutex 3>;
 	};
 
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_LPASS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		smp2p_adsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_adsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-cdsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <94>, <432>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_CDSP
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		smp2p_cdsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_cdsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-slpi {
+		compatible = "qcom,smp2p";
+		qcom,smem = <481>, <430>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_SLPI
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_SLPI
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <3>;
+
+		smp2p_slpi_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_slpi_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
 	soc: soc@0 {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -286,27 +397,581 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
 		};
 
+		ipcc: mailbox@408000 {
+			compatible = "qcom,sm8250-ipcc", "qcom,ipcc";
+			reg = <0 0x00408000 0 0x1000>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#mbox-cells = <2>;
+		};
+
+		qupv3_id_2: geniqup@8c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x008c0000 0x0 0x6000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			i2c14: i2c@880000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00880000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c14_default>;
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi14: spi@880000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00880000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi14_default>;
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c15: i2c@884000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00884000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c15_default>;
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi15: spi@884000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00884000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi15_default>;
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c16: i2c@888000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00888000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c16_default>;
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi16: spi@888000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00888000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi16_default>;
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c17: i2c@88c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0088c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c17_default>;
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi17: spi@88c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0088c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi17_default>;
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c18: i2c@890000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00890000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c18_default>;
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi18: spi@890000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00890000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi18_default>;
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c19: i2c@894000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00894000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c19_default>;
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi19: spi@894000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00894000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi19_default>;
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		qupv3_id_0: geniqup@9c0000 {
+			compatible = "qcom,geni-se-qup";
+			reg = <0x0 0x009c0000 0x0 0x6000>;
+			clock-names = "m-ahb", "s-ahb";
+			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			i2c0: i2c@980000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00980000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c0_default>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi0: spi@980000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00980000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi0_default>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@984000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00984000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c1_default>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi1: spi@984000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00984000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi1_default>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@988000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00988000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c2_default>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi2: spi@988000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00988000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi2_default>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@98c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0098c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c3_default>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi3: spi@98c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0098c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi3_default>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@990000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00990000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c4_default>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi4: spi@990000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00990000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi4_default>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c5: i2c@994000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00994000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c5_default>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi5: spi@994000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00994000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi5_default>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c6: i2c@998000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00998000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c6_default>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi6: spi@998000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00998000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi6_default>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c7: i2c@99c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x0099c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c7_default>;
+				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi7: spi@99c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x0099c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi7_default>;
+				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
 		qupv3_id_1: geniqup@ac0000 {
 			compatible = "qcom,geni-se-qup";
 			reg = <0x0 0x00ac0000 0x0 0x6000>;
 			clock-names = "m-ahb", "s-ahb";
-			clocks = <&gcc 133>, <&gcc 134>;
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
 			status = "disabled";
 
+			i2c8: i2c@a80000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a80000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c8_default>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi8: spi@a80000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a80000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi8_default>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c9: i2c@a84000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a84000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c9_default>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi9: spi@a84000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a84000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi9_default>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c10: i2c@a88000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a88000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c10_default>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi10: spi@a88000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a88000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi10_default>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c11: i2c@a8c000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a8c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c11_default>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi11: spi@a8c000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a8c000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi11_default>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c12: i2c@a90000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a90000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c12_default>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi12: spi@a90000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a90000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi12_default>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
 			uart2: serial@a90000 {
 				compatible = "qcom,geni-debug-uart";
 				reg = <0x0 0x00a90000 0x0 0x4000>;
 				clock-names = "se";
-				clocks = <&gcc 113>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
 				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
+
+			i2c13: i2c@a94000 {
+				compatible = "qcom,geni-i2c";
+				reg = <0 0x00a94000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_i2c13_default>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi13: spi@a94000 {
+				compatible = "qcom,geni-spi";
+				reg = <0 0x00a94000 0 0x4000>;
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi13_default>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
 		};
 
-		ufs_mem_hc: ufs@1d84000 {
+		ufs_mem_hc: ufshc@1d84000 {
 			compatible = "qcom,sm8250-ufshc", "qcom,ufshc",
 				     "jedec,ufs-2.0";
 			reg = <0 0x01d84000 0 0x3000>;
@@ -376,13 +1041,229 @@
 			};
 		};
 
-		intc: interrupt-controller@17a00000 {
-			compatible = "arm,gic-v3";
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			reg = <0x0 0x17a00000 0x0 0x10000>,     /* GICD */
-			      <0x0 0x17a60000 0x0 0x100000>;    /* GICR * 8 */
-			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		tcsr_mutex: hwlock@1f40000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x0 0x01f40000 0x0 0x40000>;
+			#hwlock-cells = <1>;
+		};
+
+		gpu: gpu@3d00000 {
+			/*
+			 * note: the amd,imageon compatible makes it possible
+			 * to use the drm/msm driver without the display node,
+			 * make sure to remove it when display node is added
+			 */
+			compatible = "qcom,adreno-650.2",
+				     "qcom,adreno",
+				     "amd,imageon";
+			#stream-id-cells = <16>;
+
+			reg = <0 0x03d00000 0 0x40000>;
+			reg-names = "kgsl_3d0_reg_memory";
+
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+
+			iommus = <&adreno_smmu 0 0x401>;
+
+			operating-points-v2 = <&gpu_opp_table>;
+
+			qcom,gmu = <&gmu>;
+
+			zap-shader {
+				memory-region = <&gpu_mem>;
+			};
+
+			/* note: downstream checks gpu binning for 670 Mhz */
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-670000000 {
+					opp-hz = /bits/ 64 <670000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+				};
+
+				opp-587000000 {
+					opp-hz = /bits/ 64 <587000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+				};
+
+				opp-525000000 {
+					opp-hz = /bits/ 64 <525000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
+				};
+
+				opp-490000000 {
+					opp-hz = /bits/ 64 <490000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+				};
+
+				opp-441600000 {
+					opp-hz = /bits/ 64 <441600000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
+				};
+
+				opp-400000000 {
+					opp-hz = /bits/ 64 <400000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				};
+
+				opp-305000000 {
+					opp-hz = /bits/ 64 <305000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+				};
+			};
+		};
+
+		gmu: gmu@3d6a000 {
+			compatible="qcom,adreno-gmu-650.2", "qcom,adreno-gmu";
+
+			reg = <0 0x03d6a000 0 0x30000>,
+			      <0 0x3de0000 0 0x10000>,
+			      <0 0xb290000 0 0x10000>,
+			      <0 0xb490000 0 0x10000>;
+			reg-names = "gmu", "rscc", "gmu_pdc", "gmu_pdc_seq";
+
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hfi", "gmu";
+
+			clocks = <&gpucc 0>,
+				 <&gpucc 3>,
+				 <&gpucc 6>,
+				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>;
+			clock-names = "ahb", "gmu", "cxo", "axi", "memnoc";
+
+			power-domains = <&gpucc 0>,
+					<&gpucc 1>;
+			power-domain-names = "cx", "gx";
+
+			iommus = <&adreno_smmu 5 0x400>;
+
+			operating-points-v2 = <&gmu_opp_table>;
+
+			gmu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+				};
+			};
+		};
+
+		gpucc: clock-controller@3d90000 {
+			compatible = "qcom,sm8250-gpucc";
+			reg = <0 0x03d90000 0 0x9000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+			clock-names = "bi_tcxo",
+				      "gcc_gpu_gpll0_clk_src",
+				      "gcc_gpu_gpll0_div_clk_src";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		adreno_smmu: iommu@3da0000 {
+			compatible = "qcom,sm8250-smmu-500", "arm,mmu-500";
+			reg = <0 0x03da0000 0 0x10000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <2>;
+			interrupts = <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gpucc 0>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>;
+			clock-names = "ahb", "bus", "iface";
+
+			power-domains = <&gpucc 0>;
+		};
+
+		slpi: remoteproc@5c00000 {
+			compatible = "qcom,sm8250-slpi-pas";
+			reg = <0 0x05c00000 0 0x4000>;
+
+			interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>,
+					      <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&aoss_qmp AOSS_QMP_LS_SLPI>,
+					<&rpmhpd SM8250_LCX>,
+					<&rpmhpd SM8250_LMX>;
+			power-domain-names = "load_state", "lcx", "lmx";
+
+			memory-region = <&slpi_mem>;
+
+			qcom,smem-states = <&smp2p_slpi_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_SLPI
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_SLPI
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <3>;
+			};
+		};
+
+		cdsp: remoteproc@8300000 {
+			compatible = "qcom,sm8250-cdsp-pas";
+			reg = <0 0x08300000 0 0x10000>;
+
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
+					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&aoss_qmp AOSS_QMP_LS_CDSP>,
+					<&rpmhpd SM8250_CX>;
+			power-domain-names = "load_state", "cx";
+
+			memory-region = <&cdsp_mem>;
+
+			qcom,smem-states = <&smp2p_cdsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_CDSP
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <5>;
+			};
 		};
 
 		pdc: interrupt-controller@b220000 {
@@ -395,7 +1276,20 @@
 			interrupt-controller;
 		};
 
-		spmi: qcom,spmi@c440000 {
+		aoss_qmp: qmp@c300000 {
+			compatible = "qcom,sm8250-aoss-qmp";
+			reg = <0 0x0c300000 0 0x100000>;
+			interrupts-extended = <&ipcc IPCC_CLIENT_AOP
+						     IPCC_MPROC_SIGNAL_GLINK_QMP
+						     IRQ_TYPE_EDGE_RISING>;
+			mboxes = <&ipcc IPCC_CLIENT_AOP
+					IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+			#clock-cells = <0>;
+			#power-domain-cells = <1>;
+		};
+
+		spmi_bus: spmi@c440000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0x0 0x0c440000 0x0 0x0001100>,
 			      <0x0 0x0c600000 0x0 0x2000000>,
@@ -413,82 +1307,633 @@
 			#interrupt-cells = <4>;
 		};
 
-		apps_rsc: rsc@18200000 {
-			label = "apps_rsc";
-			compatible = "qcom,rpmh-rsc";
-			reg = <0x0 0x18200000 0x0 0x10000>,
-				<0x0 0x18210000 0x0 0x10000>,
-				<0x0 0x18220000 0x0 0x10000>;
-			reg-names = "drv-0", "drv-1", "drv-2";
-			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
-			qcom,tcs-offset = <0xd00>;
-			qcom,drv-id = <2>;
-			qcom,tcs-config = <ACTIVE_TCS  2>, <SLEEP_TCS   3>,
-					  <WAKE_TCS    3>, <CONTROL_TCS 1>;
+		tlmm: pinctrl@f100000 {
+			compatible = "qcom,sm8250-pinctrl";
+			reg = <0 0x0f100000 0 0x300000>,
+			      <0 0x0f500000 0 0x300000>,
+			      <0 0x0f900000 0 0x300000>;
+			reg-names = "west", "south", "north";
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&tlmm 0 0 180>;
+			wakeup-parent = <&pdc>;
 
-			rpmhcc: clock-controller {
-				compatible = "qcom,sm8250-rpmh-clk";
-				#clock-cells = <1>;
-				clock-names = "xo";
-				clocks = <&xo_board>;
+			qup_i2c0_default: qup-i2c0-default {
+				mux {
+					pins = "gpio28", "gpio29";
+					function = "qup0";
+				};
+
+				config {
+					pins = "gpio28", "gpio29";
+					drive-strength = <2>;
+					bias-disable;
+				};
 			};
 
-			rpmhpd: power-controller {
-				compatible = "qcom,sm8250-rpmhpd";
-				#power-domain-cells = <1>;
-				operating-points-v2 = <&rpmhpd_opp_table>;
+			qup_i2c1_default: qup-i2c1-default {
+				pinmux {
+					pins = "gpio4", "gpio5";
+					function = "qup1";
+				};
 
-				rpmhpd_opp_table: opp-table {
-					compatible = "operating-points-v2";
+				config {
+					pins = "gpio4", "gpio5";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
 
-					rpmhpd_opp_ret: opp1 {
-						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
-					};
+			qup_i2c2_default: qup-i2c2-default {
+				mux {
+					pins = "gpio115", "gpio116";
+					function = "qup2";
+				};
 
-					rpmhpd_opp_min_svs: opp2 {
-						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
-					};
+				config {
+					pins = "gpio115", "gpio116";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
 
-					rpmhpd_opp_low_svs: opp3 {
-						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
-					};
+			qup_i2c3_default: qup-i2c3-default {
+				mux {
+					pins = "gpio119", "gpio120";
+					function = "qup3";
+				};
 
-					rpmhpd_opp_svs: opp4 {
-						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
-					};
+				config {
+					pins = "gpio119", "gpio120";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
 
-					rpmhpd_opp_svs_l1: opp5 {
-						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
-					};
+			qup_i2c4_default: qup-i2c4-default {
+				mux {
+					pins = "gpio8", "gpio9";
+					function = "qup4";
+				};
 
-					rpmhpd_opp_nom: opp6 {
-						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
-					};
+				config {
+					pins = "gpio8", "gpio9";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
 
-					rpmhpd_opp_nom_l1: opp7 {
-						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
-					};
+			qup_i2c5_default: qup-i2c5-default {
+				mux {
+					pins = "gpio12", "gpio13";
+					function = "qup5";
+				};
 
-					rpmhpd_opp_nom_l2: opp8 {
-						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
-					};
+				config {
+					pins = "gpio12", "gpio13";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
 
-					rpmhpd_opp_turbo: opp9 {
-						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
-					};
+			qup_i2c6_default: qup-i2c6-default {
+				mux {
+					pins = "gpio16", "gpio17";
+					function = "qup6";
+				};
 
-					rpmhpd_opp_turbo_l1: opp10 {
-						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
-					};
+				config {
+					pins = "gpio16", "gpio17";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			qup_i2c7_default: qup-i2c7-default {
+				mux {
+					pins = "gpio20", "gpio21";
+					function = "qup7";
+				};
+
+				config {
+					pins = "gpio20", "gpio21";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			qup_i2c8_default: qup-i2c8-default {
+				mux {
+					pins = "gpio24", "gpio25";
+					function = "qup8";
+				};
+
+				config {
+					pins = "gpio24", "gpio25";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			qup_i2c9_default: qup-i2c9-default {
+				mux {
+					pins = "gpio125", "gpio126";
+					function = "qup9";
+				};
+
+				config {
+					pins = "gpio125", "gpio126";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			qup_i2c10_default: qup-i2c10-default {
+				mux {
+					pins = "gpio129", "gpio130";
+					function = "qup10";
+				};
+
+				config {
+					pins = "gpio129", "gpio130";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			qup_i2c11_default: qup-i2c11-default {
+				mux {
+					pins = "gpio60", "gpio61";
+					function = "qup11";
+				};
+
+				config {
+					pins = "gpio60", "gpio61";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			qup_i2c12_default: qup-i2c12-default {
+				mux {
+					pins = "gpio32", "gpio33";
+					function = "qup12";
+				};
+
+				config {
+					pins = "gpio32", "gpio33";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			qup_i2c13_default: qup-i2c13-default {
+				mux {
+					pins = "gpio36", "gpio37";
+					function = "qup13";
+				};
+
+				config {
+					pins = "gpio36", "gpio37";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			qup_i2c14_default: qup-i2c14-default {
+				mux {
+					pins = "gpio40", "gpio41";
+					function = "qup14";
+				};
+
+				config {
+					pins = "gpio40", "gpio41";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			qup_i2c15_default: qup-i2c15-default {
+				mux {
+					pins = "gpio44", "gpio45";
+					function = "qup15";
+				};
+
+				config {
+					pins = "gpio44", "gpio45";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			qup_i2c16_default: qup-i2c16-default {
+				mux {
+					pins = "gpio48", "gpio49";
+					function = "qup16";
+				};
+
+				config {
+					pins = "gpio48", "gpio49";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			qup_i2c17_default: qup-i2c17-default {
+				mux {
+					pins = "gpio52", "gpio53";
+					function = "qup17";
+				};
+
+				config {
+					pins = "gpio52", "gpio53";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			qup_i2c18_default: qup-i2c18-default {
+				mux {
+					pins = "gpio56", "gpio57";
+					function = "qup18";
+				};
+
+				config {
+					pins = "gpio56", "gpio57";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			qup_i2c19_default: qup-i2c19-default {
+				mux {
+					pins = "gpio0", "gpio1";
+					function = "qup19";
+				};
+
+				config {
+					pins = "gpio0", "gpio1";
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			qup_spi0_default: qup-spi0-default {
+				mux {
+					pins = "gpio28", "gpio29",
+					       "gpio30", "gpio31";
+					function = "qup0";
+				};
+
+				config {
+					pins = "gpio28", "gpio29",
+					       "gpio30", "gpio31";
+					drive-strength = <6>;
+					bias-disable;
+				};
+			};
+
+			qup_spi1_default: qup-spi1-default {
+				mux {
+					pins = "gpio4", "gpio5",
+					       "gpio6", "gpio7";
+					function = "qup1";
+				};
+
+				config {
+					pins = "gpio4", "gpio5",
+					       "gpio6", "gpio7";
+					drive-strength = <6>;
+					bias-disable;
+				};
+			};
+
+			qup_spi2_default: qup-spi2-default {
+				mux {
+					pins = "gpio115", "gpio116",
+					       "gpio117", "gpio118";
+					function = "qup2";
+				};
+
+				config {
+					pins = "gpio115", "gpio116",
+					       "gpio117", "gpio118";
+					drive-strength = <6>;
+					bias-disable;
+				};
+			};
+
+			qup_spi3_default: qup-spi3-default {
+				mux {
+					pins = "gpio119", "gpio120",
+					       "gpio121", "gpio122";
+					function = "qup3";
+				};
+
+				config {
+					pins = "gpio119", "gpio120",
+					       "gpio121", "gpio122";
+					drive-strength = <6>;
+					bias-disable;
+				};
+			};
+
+			qup_spi4_default: qup-spi4-default {
+				mux {
+					pins = "gpio8", "gpio9",
+					       "gpio10", "gpio11";
+					function = "qup4";
+				};
+
+				config {
+					pins = "gpio8", "gpio9",
+					       "gpio10", "gpio11";
+					drive-strength = <6>;
+					bias-disable;
+				};
+			};
+
+			qup_spi5_default: qup-spi5-default {
+				mux {
+					pins = "gpio12", "gpio13",
+					       "gpio14", "gpio15";
+					function = "qup5";
+				};
+
+				config {
+					pins = "gpio12", "gpio13",
+					       "gpio14", "gpio15";
+					drive-strength = <6>;
+					bias-disable;
+				};
+			};
+
+			qup_spi6_default: qup-spi6-default {
+				mux {
+					pins = "gpio16", "gpio17",
+					       "gpio18", "gpio19";
+					function = "qup6";
+				};
+
+				config {
+					pins = "gpio16", "gpio17",
+					       "gpio18", "gpio19";
+					drive-strength = <6>;
+					bias-disable;
+				};
+			};
+
+			qup_spi7_default: qup-spi7-default {
+				mux {
+					pins = "gpio20", "gpio21",
+					       "gpio22", "gpio23";
+					function = "qup7";
+				};
+
+				config {
+					pins = "gpio20", "gpio21",
+					       "gpio22", "gpio23";
+					drive-strength = <6>;
+					bias-disable;
+				};
+			};
+
+			qup_spi8_default: qup-spi8-default {
+				mux {
+					pins = "gpio24", "gpio25",
+					       "gpio26", "gpio27";
+					function = "qup8";
+				};
+
+				config {
+					pins = "gpio24", "gpio25",
+					       "gpio26", "gpio27";
+					drive-strength = <6>;
+					bias-disable;
+				};
+			};
+
+			qup_spi9_default: qup-spi9-default {
+				mux {
+					pins = "gpio125", "gpio126",
+					       "gpio127", "gpio128";
+					function = "qup9";
+				};
+
+				config {
+					pins = "gpio125", "gpio126",
+					       "gpio127", "gpio128";
+					drive-strength = <6>;
+					bias-disable;
+				};
+			};
+
+			qup_spi10_default: qup-spi10-default {
+				mux {
+					pins = "gpio129", "gpio130",
+					       "gpio131", "gpio132";
+					function = "qup10";
+				};
+
+				config {
+					pins = "gpio129", "gpio130",
+					       "gpio131", "gpio132";
+					drive-strength = <6>;
+					bias-disable;
+				};
+			};
+
+			qup_spi11_default: qup-spi11-default {
+				mux {
+					pins = "gpio60", "gpio61",
+					       "gpio62", "gpio63";
+					function = "qup11";
+				};
+
+				config {
+					pins = "gpio60", "gpio61",
+					       "gpio62", "gpio63";
+					drive-strength = <6>;
+					bias-disable;
+				};
+			};
+
+			qup_spi12_default: qup-spi12-default {
+				mux {
+					pins = "gpio32", "gpio33",
+					       "gpio34", "gpio35";
+					function = "qup12";
+				};
+
+				config {
+					pins = "gpio32", "gpio33",
+					       "gpio34", "gpio35";
+					drive-strength = <6>;
+					bias-disable;
+				};
+			};
+
+			qup_spi13_default: qup-spi13-default {
+				mux {
+					pins = "gpio36", "gpio37",
+					       "gpio38", "gpio39";
+					function = "qup13";
+				};
+
+				config {
+					pins = "gpio36", "gpio37",
+					       "gpio38", "gpio39";
+					drive-strength = <6>;
+					bias-disable;
+				};
+			};
+
+			qup_spi14_default: qup-spi14-default {
+				mux {
+					pins = "gpio40", "gpio41",
+					       "gpio42", "gpio43";
+					function = "qup14";
+				};
+
+				config {
+					pins = "gpio40", "gpio41",
+					       "gpio42", "gpio43";
+					drive-strength = <6>;
+					bias-disable;
+				};
+			};
+
+			qup_spi15_default: qup-spi15-default {
+				mux {
+					pins = "gpio44", "gpio45",
+					       "gpio46", "gpio47";
+					function = "qup15";
+				};
+
+				config {
+					pins = "gpio44", "gpio45",
+					       "gpio46", "gpio47";
+					drive-strength = <6>;
+					bias-disable;
+				};
+			};
+
+			qup_spi16_default: qup-spi16-default {
+				mux {
+					pins = "gpio48", "gpio49",
+					       "gpio50", "gpio51";
+					function = "qup16";
+				};
+
+				config {
+					pins = "gpio48", "gpio49",
+					       "gpio50", "gpio51";
+					drive-strength = <6>;
+					bias-disable;
+				};
+			};
+
+			qup_spi17_default: qup-spi17-default {
+				mux {
+					pins = "gpio52", "gpio53",
+					       "gpio54", "gpio55";
+					function = "qup17";
+				};
+
+				config {
+					pins = "gpio52", "gpio53",
+					       "gpio54", "gpio55";
+					drive-strength = <6>;
+					bias-disable;
+				};
+			};
+
+			qup_spi18_default: qup-spi18-default {
+				mux {
+					pins = "gpio56", "gpio57",
+					       "gpio58", "gpio59";
+					function = "qup18";
+				};
+
+				config {
+					pins = "gpio56", "gpio57",
+					       "gpio58", "gpio59";
+					drive-strength = <6>;
+					bias-disable;
+				};
+			};
+
+			qup_spi19_default: qup-spi19-default {
+				mux {
+					pins = "gpio0", "gpio1",
+					       "gpio2", "gpio3";
+					function = "qup19";
+				};
+
+				config {
+					pins = "gpio0", "gpio1",
+					       "gpio2", "gpio3";
+					drive-strength = <6>;
+					bias-disable;
 				};
 			};
 		};
 
-		tcsr_mutex_regs: syscon@1f40000 {
-			compatible = "syscon";
-			reg = <0x0 0x01f40000 0x0 0x40000>;
+		adsp: remoteproc@17300000 {
+			compatible = "qcom,sm8250-adsp-pas";
+			reg = <0 0x17300000 0 0x100>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&aoss_qmp AOSS_QMP_LS_LPASS>,
+					<&rpmhpd SM8250_LCX>,
+					<&rpmhpd SM8250_LMX>;
+			power-domain-names = "load_state", "lcx", "lmx";
+
+			memory-region = <&adsp_mem>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <2>;
+			};
+		};
+
+		intc: interrupt-controller@17a00000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x0 0x17a00000 0x0 0x10000>,     /* GICD */
+			      <0x0 0x17a60000 0x0 0x100000>;    /* GICR * 8 */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		watchdog@17c10000 {
+			compatible = "qcom,apss-wdt-sm8250", "qcom,kpss-wdt";
+			reg = <0 0x17c10000 0 0x1000>;
+			clocks = <&sleep_clk>;
 		};
 
 		timer@17c20000 {
@@ -550,6 +1995,78 @@
 			};
 		};
 
+		apps_rsc: rsc@18200000 {
+			label = "apps_rsc";
+			compatible = "qcom,rpmh-rsc";
+			reg = <0x0 0x18200000 0x0 0x10000>,
+				<0x0 0x18210000 0x0 0x10000>,
+				<0x0 0x18220000 0x0 0x10000>;
+			reg-names = "drv-0", "drv-1", "drv-2";
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,tcs-offset = <0xd00>;
+			qcom,drv-id = <2>;
+			qcom,tcs-config = <ACTIVE_TCS  2>, <SLEEP_TCS   3>,
+					  <WAKE_TCS    3>, <CONTROL_TCS 1>;
+
+			rpmhcc: clock-controller {
+				compatible = "qcom,sm8250-rpmh-clk";
+				#clock-cells = <1>;
+				clock-names = "xo";
+				clocks = <&xo_board>;
+			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sm8250-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp1 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp2 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs: opp3 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_svs: opp4 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp5 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_nom: opp6 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp7 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp8 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp9 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp10 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
+		};
 	};
 
 	timer {
diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index d17351cdbce0..d7902294faf3 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -1,23 +1,55 @@
 # SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-beacon-rzg2m-kit.dtb
 dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m.dtb
 dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex.dtb
 dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex-idk-1110wr.dtb
+dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2.dtb
+dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2-ex.dtb
+dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dtb
+
 dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n.dtb
 dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-ex.dtb
-dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-cat874.dtb r8a774c0-ek874.dtb \
-			       r8a774c0-ek874-idk-2121wr.dtb \
-			       r8a774c0-ek874-mipi-2.1.dtb
+dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-ex-idk-1110wr.dtb
+dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-rev2.dtb
+dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-rev2-ex.dtb
+dtb-$(CONFIG_ARCH_R8A774B1) += r8a774b1-hihope-rzg2n-rev2-ex-idk-1110wr.dtb
+
+dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-cat874.dtb
+dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-ek874.dtb
+dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-ek874-idk-2121wr.dtb
+dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-ek874-mipi-2.1.dtb
+
+dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-hihope-rzg2h.dtb
+dtb-$(CONFIG_ARCH_R8A774E1) += r8a774e1-hihope-rzg2h-ex.dtb
+
 dtb-$(CONFIG_ARCH_R8A77950) += r8a77950-salvator-x.dtb
-dtb-$(CONFIG_ARCH_R8A77950) += r8a77950-ulcb.dtb r8a77950-ulcb-kf.dtb
-dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-salvator-x.dtb r8a77951-salvator-xs.dtb
-dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-ulcb.dtb r8a77951-ulcb-kf.dtb
-dtb-$(CONFIG_ARCH_R8A77960) += r8a77960-salvator-x.dtb r8a77960-salvator-xs.dtb
-dtb-$(CONFIG_ARCH_R8A77960) += r8a77960-ulcb.dtb r8a77960-ulcb-kf.dtb
+dtb-$(CONFIG_ARCH_R8A77950) += r8a77950-ulcb.dtb
+dtb-$(CONFIG_ARCH_R8A77950) += r8a77950-ulcb-kf.dtb
+
+dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-salvator-x.dtb
+dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-salvator-xs.dtb
+dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-ulcb.dtb
+dtb-$(CONFIG_ARCH_R8A77951) += r8a77951-ulcb-kf.dtb
+
+dtb-$(CONFIG_ARCH_R8A77960) += r8a77960-salvator-x.dtb
+dtb-$(CONFIG_ARCH_R8A77960) += r8a77960-salvator-xs.dtb
+dtb-$(CONFIG_ARCH_R8A77960) += r8a77960-ulcb.dtb
+dtb-$(CONFIG_ARCH_R8A77960) += r8a77960-ulcb-kf.dtb
+
 dtb-$(CONFIG_ARCH_R8A77961) += r8a77961-salvator-xs.dtb
 dtb-$(CONFIG_ARCH_R8A77961) += r8a77961-ulcb.dtb
-dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-salvator-x.dtb r8a77965-salvator-xs.dtb
-dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-ulcb.dtb r8a77965-ulcb-kf.dtb
-dtb-$(CONFIG_ARCH_R8A77970) += r8a77970-eagle.dtb r8a77970-v3msk.dtb
-dtb-$(CONFIG_ARCH_R8A77980) += r8a77980-condor.dtb r8a77980-v3hsk.dtb
+
+dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-salvator-x.dtb
+dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-salvator-xs.dtb
+dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-ulcb.dtb
+dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-ulcb-kf.dtb
+
+dtb-$(CONFIG_ARCH_R8A77970) += r8a77970-eagle.dtb
+dtb-$(CONFIG_ARCH_R8A77970) += r8a77970-v3msk.dtb
+
+dtb-$(CONFIG_ARCH_R8A77980) += r8a77980-condor.dtb
+dtb-$(CONFIG_ARCH_R8A77980) += r8a77980-v3hsk.dtb
+
 dtb-$(CONFIG_ARCH_R8A77990) += r8a77990-ebisu.dtb
+
 dtb-$(CONFIG_ARCH_R8A77995) += r8a77995-draak.dtb
diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
new file mode 100644
index 000000000000..66c9153b3101
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
@@ -0,0 +1,758 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2020, Compass Electronics Group, LLC
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	backlight_lvds: backlight-lvds {
+		compatible = "pwm-backlight";
+		power-supply = <&reg_lcd>;
+		enable-gpios = <&gpio_exp1 3 GPIO_ACTIVE_LOW>;
+		pwms = <&pwm2 0 50000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	backlight_rgb: backlight-rgb {
+		compatible = "pwm-backlight";
+		power-supply = <&reg_lcd>;
+		enable-gpios = <&gpio_exp1 7 GPIO_ACTIVE_LOW>;
+		pwms = <&pwm0 0 50000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	hdmi0-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi0_con: endpoint {
+				remote-endpoint = <&rcar_dw_hdmi0_out>;
+			};
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		key-1 {
+			gpios = <&gpio4 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_1>;
+			label = "Switch-1";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-2 {
+			gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_2>;
+			label = "Switch-2";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-3 {
+			gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_3>;
+			label = "Switch-3";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-4 {
+			gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_4>;
+			label = "Switch-4";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+		key-5 {
+			gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_5>;
+			label = "Switch-4";
+			wakeup-source;
+			debounce-interval = <20>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&led_pins>;
+		pinctrl-names = "default";
+
+		led0 {
+			gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+			label = "LED0";
+			linux,default-trigger = "heartbeat";
+		};
+		led1 {
+			gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+			label = "LED1";
+		};
+		led2 {
+			gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+			label = "LED2";
+		};
+		led3 {
+			gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
+			label = "LED3";
+		};
+	};
+
+	lvds {
+		compatible = "panel-lvds";
+		power-supply = <&reg_lcd_reset>;
+		width-mm = <223>;
+		height-mm = <125>;
+		backlight = <&backlight_lvds>;
+		data-mapping = "vesa-24";
+
+		panel-timing {
+			/* 800x480@60Hz */
+			clock-frequency = <30000000>;
+			hactive = <800>;
+			vactive = <480>;
+			hsync-len = <48>;
+			hfront-porch = <40>;
+			hback-porch = <40>;
+			vfront-porch = <13>;
+			vback-porch = <29>;
+			vsync-len = <3>;
+			hsync-active = <1>;
+			vsync-active = <1>;
+			de-active = <1>;
+			pixelclk-active = <0>;
+		};
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	rgb {
+		/* Different LCD with compatible timings */
+		compatible = "rocktech,rk070er9427";
+		backlight = <&backlight_rgb>;
+		enable-gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_lcd>;
+		port {
+			rgb_panel: endpoint {
+				remote-endpoint = <&du_out_rgb>;
+			};
+		};
+	};
+
+	reg_audio: regulator_audio {
+		compatible = "regulator-fixed";
+		regulator-name = "audio-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio_exp2 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_lcd: regulator-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd_panel_pwr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio_exp1 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_lcd_reset: regulator-lcd-reset {
+		compatible = "regulator-fixed";
+		regulator-name = "nLCD_RESET";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio5 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_lcd>;
+	};
+
+	reg_cam0: regulator_camera {
+		compatible = "regulator-fixed";
+		regulator-name = "reg_cam0";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio_exp2 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_cam1: regulator_camera {
+		compatible = "regulator-fixed";
+		regulator-name = "reg_cam1";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio_exp2 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100000>;
+	};
+
+	sound_card {
+		compatible = "audio-graph-card";
+		label = "rcar-sound";
+		dais = <&rsnd_port0>, <&rsnd_port1>;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+		regulator-always-on;
+	};
+
+	/* External DU dot clocks */
+	x302_clk: x302-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <33000000>;
+	};
+
+	x304_clk: x304-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+};
+
+&audio_clk_a {
+	clock-frequency = <24576000>;
+	assigned-clocks = <&versaclock6_bb 4>;
+	assigned-clock-rates = <24576000>;
+};
+
+&audio_clk_b {
+	clock-frequency = <22579200>;
+};
+
+&can0 {
+	pinctrl-0 = <&can0_pins>;
+	pinctrl-names = "default";
+	renesas,can-clock-select = <0x0>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-0 = <&can1_pins>;
+	pinctrl-names = "default";
+	renesas,can-clock-select = <0x0>;
+	status = "okay";
+};
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 724>,
+		<&cpg CPG_MOD 723>,
+		<&cpg CPG_MOD 722>,
+		<&versaclock5 1>,
+		<&x302_clk>,
+		<&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.2",
+		"dclkin.0", "dclkin.1", "dclkin.2";
+};
+
+&du_out_rgb {
+	remote-endpoint = <&rgb_panel>;
+};
+
+&ehci0 {
+	dr_mode = "otg";
+	status = "okay";
+	clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+};
+
+&ehci1 {
+	status = "okay";
+	clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
+};
+
+&hdmi0 {
+	status = "okay";
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+			reg = <0>;
+			dw_hdmi0_in: endpoint {
+				remote-endpoint = <&du_out_hdmi0>;
+			};
+		};
+		port@1 {
+			reg = <1>;
+			rcar_dw_hdmi0_out: endpoint {
+				remote-endpoint = <&hdmi0_con>;
+			};
+		};
+		port@2 {
+			reg = <2>;
+			dw_hdmi0_snd_in: endpoint {
+				remote-endpoint = <&rsnd_endpoint1>;
+			};
+		};
+	};
+};
+
+&hscif1 {
+	pinctrl-0 = <&hscif1_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&hsusb {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+	clock-frequency = <100000>;
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+
+	gpio_exp2: gpio@21 {
+		compatible = "onnn,pca9654";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio_exp3: gpio@22 {
+		compatible = "onnn,pca9654";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio_exp4: gpio@23 {
+		compatible = "onnn,pca9654";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	versaclock6_bb: clock-controller@6a {
+		compatible = "idt,5p49v6965";
+		reg = <0x6a>;
+		#clock-cells = <1>;
+		clocks = <&x304_clk>;
+		clock-names = "xin";
+		/* CSI0_MCLK, CSI1_MCLK, AUDIO_CLKIN, USB_HUB_MCLK_BB */
+		assigned-clocks = <&versaclock6_bb 1>,
+				   <&versaclock6_bb 2>,
+				   <&versaclock6_bb 3>,
+				   <&versaclock6_bb 4>;
+		assigned-clock-rates =	<24000000>, <24000000>, <24000000>, <24576000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+};
+
+&i2c5 {
+	status = "okay";
+	clock-frequency = <100000>;
+	pinctrl-0 = <&i2c5_pins>;
+	pinctrl-names = "default";
+
+	codec: wm8962@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		DCVDD-supply = <&reg_audio>;
+		DBVDD-supply = <&reg_audio>;
+		AVDD-supply = <&reg_audio>;
+		CPVDD-supply = <&reg_audio>;
+		MICVDD-supply = <&reg_audio>;
+		PLLVDD-supply = <&reg_audio>;
+		SPKVDD1-supply = <&reg_audio>;
+		SPKVDD2-supply = <&reg_audio>;
+		gpio-cfg = <
+			0x0000 /* 0:Default */
+			0x0000 /* 1:Default */
+			0x0000 /* 2:Default */
+			0x0000 /* 3:Default */
+			0x0000 /* 4:Default */
+			0x0000 /* 5:Default */
+		>;
+		port {
+			wm8962_endpoint: endpoint {
+				remote-endpoint = <&rsnd_endpoint0>;
+			};
+		};
+	};
+
+	/* 0 - lcd_reset */
+	/* 1 - lcd_pwr */
+	/* 2 - lcd_select */
+	/* 3 - backlight-enable */
+	/* 4 - Touch_shdwn */
+	/* 5 - LCD_H_pol */
+	/* 6 - lcd_V_pol */
+	gpio_exp1: gpio@20 {
+		compatible = "onnn,pca9654";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	touchscreen@26 {
+		compatible = "ilitek,ili2117";
+		reg = <0x26>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <9 IRQ_TYPE_EDGE_RISING>;
+		wakeup-source;
+	};
+
+	hd3ss3220@47 {
+		compatible = "ti,hd3ss3220";
+		reg = <0x47>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					reg = <1>;
+					hd3ss3220_ep: endpoint {
+						remote-endpoint = <&usb3_role_switch>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&lvds0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&ohci0 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pciec0 {
+	status = "okay";
+};
+
+&pciec1 {
+	status = "okay";
+};
+
+&pcie_bus_clk {
+	clock-frequency = <100000000>;
+};
+
+&pfc {
+	can0_pins: can0 {
+		groups = "can0_data_a";
+		function = "can0";
+	};
+
+	can1_pins: can1 {
+		groups = "can1_data";
+		function = "can1";
+	};
+
+	du_pins: du {
+		groups = "du_rgb888", "du_sync", "du_clk_out_1", "du_disp";
+		function = "du";
+	};
+
+	i2c2_pins: i2c2 {
+		groups = "i2c2_a";
+		function = "i2c2";
+	};
+
+	i2c5_pins: i2c5 {
+		groups = "i2c5";
+		function = "i2c5";
+	};
+
+	led_pins: leds {
+		/* GP_0_4 , AVS1, AVS2, GP_7_3 */
+		pins = "GP_0_4", "GP_7_0", "GP_7_1", "GP_7_3";
+		bias-pull-down;
+	};
+
+	pwm0_pins: pwm0 {
+		groups = "pwm0";
+		function = "pwm0";
+	};
+
+	pwm2_pins: pwm2 {
+		groups = "pwm2_a";
+		function = "pwm2_a";
+	};
+
+	sdhi0_pins: sd0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <3300>;
+	};
+
+	sdhi0_pins_uhs: sd0_uhs {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <1800>;
+	};
+
+	sound_pins: sound {
+		groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
+		function = "ssi";
+	};
+
+	sound_clk_pins: sound_clk {
+		groups = "audio_clk_a_a";
+		function = "audio_clk";
+	};
+
+	usb0_pins: usb0 {
+		mux {
+			groups = "usb0";
+			function = "usb0";
+		};
+	};
+
+	usb1_pins: usb1 {
+		mux {
+			groups = "usb1";
+			function = "usb1";
+		};
+	};
+
+	usb30_pins: usb30 {
+		mux {
+			groups = "usb30";
+			function = "usb30";
+		};
+	};
+};
+
+&pwm0 {
+	pinctrl-0 = <&pwm0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-0 = <&pwm2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_pins &sound_clk_pins>;
+	pinctrl-names = "default";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	/* audio_clkout0/1/2/3 */
+	#clock-cells = <1>;
+	clock-frequency = <11289600>;
+
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 1005>,
+		 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+		 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+		 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+		 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+		 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+		 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+		 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+		 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+		 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+		 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+		 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+		 <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>,
+		 <&cpg CPG_CORE R8A774A1_CLK_S0D4>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		rsnd_port0: port@0 {
+			reg = <0>;
+			rsnd_endpoint0: endpoint {
+				remote-endpoint = <&wm8962_endpoint>;
+
+				dai-format = "i2s";
+				bitclock-master = <&rsnd_endpoint0>;
+				frame-master = <&rsnd_endpoint0>;
+
+				playback = <&ssi1 &dvc1 &src1>;
+				capture = <&ssi0>;
+			};
+		};
+		rsnd_port1: port@1 {
+		    reg = <0x01>;
+			rsnd_endpoint1: endpoint {
+				remote-endpoint = <&dw_hdmi0_snd_in>;
+
+				dai-format = "i2s";
+				bitclock-master = <&rsnd_endpoint1>;
+				frame-master = <&rsnd_endpoint1>;
+
+				playback = <&ssi2>;
+			};
+		};
+	};
+};
+
+&rwdt {
+	status = "okay";
+	timeout-sec = <60>;
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&scif5 {
+	pinctrl-0 = <&scif5_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-1 = <&sdhi0_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&ssi1 {
+	shared-pin;
+};
+
+&tmu0 {
+	status = "okay";
+};
+
+&tmu1 {
+	status = "okay";
+};
+
+&tmu2 {
+	status = "okay";
+};
+
+&tmu3 {
+	status = "okay";
+};
+
+&tmu4 {
+	status = "okay";
+};
+
+&usb2_phy0 {
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb2_phy1 {
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb3_peri0 {
+	companion = <&xhci0>;
+	status = "okay";
+	usb-role-switch;
+
+	port {
+		usb3_role_switch: endpoint {
+			remote-endpoint = <&hd3ss3220_ep>;
+		};
+	};
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&vin0 {
+	status = "okay";
+};
+&vin1 {
+	status = "okay";
+};
+&vin2 {
+	status = "okay";
+};
+&vin3 {
+	status = "okay";
+};
+&vin4 {
+	status = "okay";
+};
+&vin5 {
+	status = "okay";
+};
+&vin6 {
+	status = "okay";
+};
+&vin7 {
+	status = "okay";
+};
+
+&xhci0
+{
+	pinctrl-0 = <&usb30_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
new file mode 100644
index 000000000000..97272f5fa0ab
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
@@ -0,0 +1,312 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2020, Compass Electronics Group, LLC
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x0 0x80000000>;
+	};
+
+	osc_32k: osc_32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "osc_32k";
+	};
+
+	reg_1p8v: regulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	wlan_pwrseq: wlan_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pca9654 1 GPIO_ACTIVE_LOW>;
+		clocks = <&osc_32k>;
+		clock-names = "ext_clock";
+		post-power-on-delay-ms = <80>;
+	};
+};
+
+&avb {
+	pinctrl-0 = <&avb_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <16666666>;
+};
+
+&extalr_clk {
+	clock-frequency = <32768>;
+};
+
+&gpio6 {
+	usb_hub_reset {
+		gpio-hog;
+		gpios = <10 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "usb-hub-reset";
+	};
+};
+
+&hscif0 {
+	pinctrl-0 = <&hscif0_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+	max-speed = <4000000>;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&pca9654 2 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&pca9654 5 GPIO_ACTIVE_HIGH>;
+		clocks = <&osc_32k>;
+		clock-names = "extclk";
+	};
+};
+
+&hscif2 {
+	status = "okay";
+	pinctrl-0 = <&hscif2_pins>;
+	pinctrl-names = "default";
+};
+
+&i2c4 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	pca9654: gpio@20 {
+		compatible = "onnn,pca9654";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"i2c4_20_0",
+			"wl_reg_on",
+			"bt_reg_on",
+			"i2c4_20_3",
+			"i2c4_20_4",
+			"bt_dev_wake",
+			"i2c4_20_6",
+			"i2c4_20_7";
+	};
+
+	pca9654_lte: gpio@21 {
+		compatible = "onnn,pca9654";
+		reg = <0x21>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"i2c4_21_0",
+			"zoe_pwr_on",
+			"zoe_extint",
+			"zoe_reset_n",
+			"sara_reset",
+			"i2c4_21_5",
+			"sara_pwr_off",
+			"sara_networking_status";
+	};
+
+	eeprom@50 {
+		compatible = "microchip,at24c64", "atmel,24c64";
+		pagesize = <32>;
+		read-only;	/* Manufacturing EEPROM programmed at factory */
+		reg = <0x50>;
+	};
+
+	rtc@51 {
+		compatible = "nxp,pcf85263";
+		reg = <0x51>;
+	};
+
+	versaclock5: versaclock_som@6a {
+		compatible = "idt,5p49v6965";
+		reg = <0x6a>;
+		#clock-cells = <1>;
+		clocks = <&x304_clk>;
+		clock-names = "xin";
+		/* du_dotclkin0, du_dotclkin2, usb_extal, avb_txcrefclk */
+		assigned-clocks = <&versaclock5 1>,
+				   <&versaclock5 2>,
+				   <&versaclock5 3>,
+				   <&versaclock5 4>;
+		assigned-clock-rates = <33333333>, <33333333>, <50000000>, <125000000>;
+	};
+};
+
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	avb_pins: avb {
+		mux {
+			groups = "avb_link", "avb_mdio", "avb_mii";
+			function = "avb";
+		};
+
+		pins_mdio {
+			groups = "avb_mdio";
+			drive-strength = <24>;
+		};
+
+		pins_mii_tx {
+			pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0",
+			       "PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3";
+			drive-strength = <12>;
+		};
+	};
+
+	scif2_pins: scif2 {
+		groups = "scif2_data_a";
+		function = "scif2";
+	};
+
+	hscif0_pins: hscif0 {
+		groups = "hscif0_data", "hscif0_ctrl";
+		function = "hscif0";
+	};
+
+	hscif1_pins: hscif1 {
+		groups = "hscif1_data_a", "hscif1_ctrl_a";
+		function = "hscif1";
+	};
+
+	hscif2_pins: hscif2 {
+		groups = "hscif2_data_a";
+		function = "hscif2";
+	};
+
+	scif0_pins: scif0 {
+		groups = "scif0_data";
+		function = "scif0";
+	};
+
+	scif5_pins: scif5 {
+		groups = "scif5_data_a";
+		function = "scif5";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk_a";
+		function = "scif_clk";
+	};
+
+	i2c0_pins: i2c0 {
+		groups = "i2c0";
+		function = "i2c0";
+	};
+
+	sdhi2_pins: sd2 {
+		groups = "sdhi2_data4", "sdhi2_ctrl";
+		function = "sdhi2";
+		power-source = <1800>;
+	};
+
+	sdhi3_pins: sd3 {
+		groups = "sdhi3_data8", "sdhi3_ctrl", "sdhi3_ds";
+		function = "sdhi3";
+		power-source = <1800>;
+	};
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
+};
+
+&scif2 {
+	pinctrl-0 = <&scif2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdhi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhi2_pins>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	non-removable;
+	cap-power-off-card;
+	pm-ignore-notify;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&wlan_pwrseq>;
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&gpio1>;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&sdhi3 {
+	pinctrl-0 = <&sdhi3_pins>;
+	pinctrl-1 = <&sdhi3_pins>;
+	pinctrl-names = "default", "state_uhs";
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	fixed-emmc-driver-type = <1>;
+	status = "okay";
+};
+
+&usb_extal_clk {
+	clock-frequency = <50000000>;
+};
+
+&usb3s0_clk {
+	clock-frequency = <100000000>;
+};
+
+&vspb {
+	status = "okay";
+};
+
+&vspi0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/cat875.dtsi b/arch/arm64/boot/dts/renesas/cat875.dtsi
index aaefc3ae56d5..33daa9570684 100644
--- a/arch/arm64/boot/dts/renesas/cat875.dtsi
+++ b/arch/arm64/boot/dts/renesas/cat875.dtsi
@@ -18,7 +18,6 @@
 	pinctrl-names = "default";
 	renesas,no-ether-link;
 	phy-handle = <&phy0>;
-	phy-mode = "rgmii";
 	status = "okay";
 
 	phy0: ethernet-phy@0 {
diff --git a/arch/arm64/boot/dts/renesas/hihope-common.dtsi b/arch/arm64/boot/dts/renesas/hihope-common.dtsi
index bd056904e8bd..2eda9f66ae81 100644
--- a/arch/arm64/boot/dts/renesas/hihope-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/hihope-common.dtsi
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Device Tree Source for the HiHope RZ/G2[MN] main board common parts
+ * Device Tree Source for the HiHope RZ/G2H Rev.4.0 and
+ * HiHope RZ/G2[MN] Rev.[2.0/3.0/4.0] main board common parts
  *
  * Copyright (C) 2019 Renesas Electronics Corp.
  */
@@ -32,17 +33,6 @@
 	leds {
 		compatible = "gpio-leds";
 
-		bt_active_led {
-			label = "blue:bt";
-			gpios = <&gpio7  0 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "hci0-power";
-			default-state = "off";
-		};
-
-		led0 {
-			gpios = <&gpio6 11 GPIO_ACTIVE_HIGH>;
-		};
-
 		led1 {
 			gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
 		};
@@ -55,11 +45,8 @@
 			gpios = <&gpio0  0 GPIO_ACTIVE_HIGH>;
 		};
 
-		wlan_active_led {
-			label = "yellow:wlan";
-			gpios = <&gpio7  1 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "phy0tx";
-			default-state = "off";
+		led4 {
+			gpios = <&gpio6 11 GPIO_ACTIVE_HIGH>;
 		};
 	};
 
@@ -112,17 +99,6 @@
 		states = <3300000 1>, <1800000 0>;
 	};
 
-	wlan_en_reg: regulator-wlan_en {
-		compatible = "regulator-fixed";
-		regulator-name = "wlan-en-regulator";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		startup-delay-us = <70000>;
-
-		gpio = <&gpio_expander 1 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
 	x302_clk: x302-clock {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -194,11 +170,6 @@
 
 	uart-has-rtscts;
 	status = "okay";
-
-	bluetooth {
-		compatible = "ti,wl1837-st";
-		enable-gpios = <&gpio_expander 2 GPIO_ACTIVE_HIGH>;
-	};
 };
 
 &hsusb {
@@ -210,13 +181,6 @@
 	clock-frequency = <400000>;
 	status = "okay";
 
-	gpio_expander: gpio@20 {
-		compatible = "onnn,pca9654";
-		reg = <0x20>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
 	versaclock5: clock-generator@6a {
 		compatible = "idt,5p49v5923";
 		reg = <0x6a>;
@@ -281,11 +245,6 @@
 		power-source = <1800>;
 	};
 
-	sound_clk_pins: sound_clk {
-		groups = "audio_clk_a_a";
-		function = "audio_clk";
-	};
-
 	usb0_pins: usb0 {
 		groups = "usb0";
 		function = "usb0";
@@ -309,28 +268,6 @@
 	};
 };
 
-&rcar_sound {
-	pinctrl-0 = <&sound_clk_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-
-	/* Single DAI */
-	#sound-dai-cells = <0>;
-
-	rsnd_port: port {
-		rsnd_endpoint: endpoint {
-			remote-endpoint = <&dw_hdmi0_snd_in>;
-
-			dai-format = "i2s";
-			bitclock-master = <&rsnd_endpoint>;
-			frame-master = <&rsnd_endpoint>;
-
-			playback = <&ssi2>;
-		};
-	};
-};
-
 &rwdt {
 	timeout-sec = <60>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/renesas/hihope-rev2.dtsi b/arch/arm64/boot/dts/renesas/hihope-rev2.dtsi
new file mode 100644
index 000000000000..8e2db1d6ca81
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/hihope-rev2.dtsi
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2[MN] main board Rev.2.0 common
+ * parts
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include "hihope-common.dtsi"
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+
+		bt_active_led {
+			label = "blue:bt";
+			gpios = <&gpio7  0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "hci0-power";
+			default-state = "off";
+		};
+
+		wlan_active_led {
+			label = "yellow:wlan";
+			gpios = <&gpio7  1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+	};
+
+	wlan_en_reg: regulator-wlan_en {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		startup-delay-us = <70000>;
+
+		gpio = <&gpio_expander 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&hscif0 {
+	bluetooth {
+		compatible = "ti,wl1837-st";
+		enable-gpios = <&gpio_expander 2 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c4 {
+	gpio_expander: gpio@20 {
+		compatible = "onnn,pca9654";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&pfc {
+	sound_clk_pins: sound_clk {
+		groups = "audio_clk_a_a";
+		function = "audio_clk";
+	};
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_clk_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	rsnd_port: port {
+		rsnd_endpoint: endpoint {
+			remote-endpoint = <&dw_hdmi0_snd_in>;
+
+			dai-format = "i2s";
+			bitclock-master = <&rsnd_endpoint>;
+			frame-master = <&rsnd_endpoint>;
+
+			playback = <&ssi2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/hihope-rev4.dtsi b/arch/arm64/boot/dts/renesas/hihope-rev4.dtsi
new file mode 100644
index 000000000000..3046c07a288b
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/hihope-rev4.dtsi
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2H Rev.4.0 and
+ * HiHope RZ/G2[MN] Rev.3.0/4.0 main board common parts
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include "hihope-common.dtsi"
+
+/ {
+	audio_clkout: audio-clkout {
+		/*
+		 * This is same as <&rcar_sound 0>
+		 * but needed to avoid cs2000/rcar_sound probe dead-lock
+		 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12288000>;
+	};
+
+	wlan_en_reg: regulator-wlan_en {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		startup-delay-us = <70000>;
+
+		gpio = <&gpio4 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	x1801_clk: x1801-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+};
+
+&hscif0 {
+	bluetooth {
+		compatible = "ti,wl1837-st";
+		enable-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c2 {
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	cs2000: clk_multiplier@4f {
+		#clock-cells = <0>;
+		compatible = "cirrus,cs2000-cp";
+		reg = <0x4f>;
+		clocks = <&audio_clkout>, <&x1801_clk>;
+		clock-names = "clk_in", "ref_clk";
+
+		assigned-clocks = <&cs2000>;
+		assigned-clock-rates = <24576000>; /* 1/1 divide */
+	};
+};
+
+&pfc {
+	i2c2_pins: i2c2 {
+		groups = "i2c2_a";
+		function = "i2c2";
+	};
+
+	sound_clk_pins: sound_clk {
+		groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clkout_a";
+		function = "audio_clk";
+	};
+
+	sound_pins: sound {
+		groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
+		function = "ssi";
+	};
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_pins &sound_clk_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	/* audio_clkout0/1/2/3 */
+	#clock-cells = <1>;
+	clock-frequency = <12288000 11289600>;
+
+	/* update <audio_clk_b> to <cs2000> */
+	clocks = <&cpg CPG_MOD 1005>,
+		 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+		 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+		 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+		 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+		 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+		 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
+		 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
+		 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
+		 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
+		 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
+		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+		 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+		 <&audio_clk_a>, <&cs2000>,
+		 <&audio_clk_c>,
+		 <&cpg CPG_CORE CPG_AUDIO_CLK_I>;
+
+	rsnd_port: port {
+		rsnd_endpoint: endpoint {
+			remote-endpoint = <&dw_hdmi0_snd_in>;
+
+			dai-format = "i2s";
+			bitclock-master = <&rsnd_endpoint>;
+			frame-master = <&rsnd_endpoint>;
+
+			playback = <&ssi2>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex-lvds.dtsi b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex-lvds.dtsi
new file mode 100644
index 000000000000..40c5e8d6d841
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex-lvds.dtsi
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the RZ/G2[MN] HiHope sub board LVDS common parts
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+/ {
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm0 0 50000>;
+
+		brightness-levels = <0 2 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+};
+
+&gpio1 {
+	/*
+	 * When GP1_20 is LOW LVDS0 is connected to the LVDS connector
+	 * When GP1_20 is HIGH LVDS0 is connected to the LT8918L
+	 */
+	lvds-connector-en-gpio {
+		gpio-hog;
+		gpios = <20 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "lvds-connector-en-gpio";
+	};
+};
+
+&lvds0 {
+	ports {
+		port@1 {
+			lvds_connector: endpoint {
+			};
+		};
+	};
+};
+
+&pfc {
+	pwm0_pins: pwm0 {
+		groups = "pwm0";
+		function = "pwm0";
+	};
+};
+
+&pwm0 {
+	pinctrl-0 = <&pwm0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi
index 28fe17e3bc4e..178401a34cbf 100644
--- a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi
+++ b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Device Tree Source for the RZ/G2[MN] HiHope sub board common parts
+ * Device Tree Source for the RZ/G2[HMN] HiHope sub board common parts
  *
  * Copyright (C) 2019 Renesas Electronics Corp.
  */
@@ -13,14 +13,6 @@
 	chosen {
 		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
 	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm0 0 50000>;
-
-		brightness-levels = <0 2 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
 };
 
 &avb {
@@ -51,35 +43,6 @@
 	status = "okay";
 };
 
-&gpio1 {
-	/*
-	 * When GP1_20 is LOW LVDS0 is connected to the LVDS connector
-	 * When GP1_20 is HIGH LVDS0 is connected to the LT8918L
-	 */
-	lvds-connector-en-gpio {
-		gpio-hog;
-		gpios = <20 GPIO_ACTIVE_HIGH>;
-		output-low;
-		line-name = "lvds-connector-en-gpio";
-	};
-};
-
-&lvds0 {
-	/*
-	 * Please include the LVDS panel .dtsi file and uncomment the below line
-	 * to enable LVDS panel connected to RZ/G2[MN] boards.
-	 */
-
-	/* status = "okay"; */
-
-	ports {
-		port@1 {
-			lvds_connector: endpoint {
-			};
-		};
-	};
-};
-
 &pciec0 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts b/arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts
new file mode 100644
index 000000000000..2c5b057c30c6
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774a1-beacon-rzg2m-kit.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2020, Compass Electronics Group, LLC
+ */
+
+/dts-v1/;
+
+#include "r8a774a1.dtsi"
+#include "beacon-renesom-som.dtsi"
+#include "beacon-renesom-baseboard.dtsi"
+
+/ {
+	model = "Beacon EmbeddedWorks RZ/G2M Development Kit";
+	compatible = "beacon,beacon-rzg2m", "renesas,r8a774a1";
+
+	aliases {
+		serial0 = &scif2;
+		serial1 = &hscif0;
+		serial2 = &hscif1;
+		serial3 = &scif0;
+		serial4 = &hscif2;
+		serial5 = &scif5;
+		ethernet0 = &avb;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts
index 2ab5edd84e9b..06c04c59cc78 100644
--- a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts
+++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts
@@ -1,52 +1,15 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Device Tree Source for the HiHope RZ/G2M sub board connected to an
- * Advantech IDK-1110WR 10.1" LVDS panel
+ * Device Tree Source for the HiHope RZ/G2M Rev.3.0/4.0 sub board connected
+ * to an Advantech IDK-1110WR 10.1" LVDS panel
  *
  * Copyright (C) 2020 Renesas Electronics Corp.
  */
 
 #include "r8a774a1-hihope-rzg2m-ex.dts"
+#include "hihope-rzg2-ex-lvds.dtsi"
 #include "rzg2-advantech-idk-1110wr-panel.dtsi"
 
-/ {
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm0 0 50000>;
-
-		brightness-levels = <0 2 8 16 32 64 128 255>;
-		default-brightness-level = <6>;
-	};
-
-};
-
-&gpio1 {
-	/*
-	 * When GP1_20 is LOW LVDS0 is connected to the LVDS connector
-	 * When GP1_20 is HIGH LVDS0 is connected to the LT8918L
-	 */
-	lvds-connector-en-gpio {
-		gpio-hog;
-		gpios = <20 GPIO_ACTIVE_HIGH>;
-		output-low;
-		line-name = "lvds-connector-en-gpio";
-	};
-};
-
 &lvds0 {
 	status = "okay";
 };
-
-&pfc {
-	pwm0_pins: pwm0 {
-		groups = "pwm0";
-		function = "pwm0";
-	};
-};
-
-&pwm0 {
-	pinctrl-0 = <&pwm0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dts
index c754fca239d9..a5ca86196a7b 100644
--- a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dts
+++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dts
@@ -1,8 +1,9 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Device Tree Source for the HiHope RZ/G2M sub board
+ * Device Tree Source for the HiHope RZ/G2M Rev.3.0/4.0 connected to
+ * sub board
  *
- * Copyright (C) 2019 Renesas Electronics Corp.
+ * Copyright (C) 2020 Renesas Electronics Corp.
  */
 
 #include "r8a774a1-hihope-rzg2m.dts"
@@ -14,6 +15,7 @@
 		     "renesas,r8a774a1";
 };
 
+/* SW43 should be OFF, if in ON state SATA port will be activated */
 &pciec1 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dts
new file mode 100644
index 000000000000..c0e9d8ca4a8c
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2M Rev.2.0 sub board connected to an
+ * Advantech IDK-1110WR 10.1" LVDS panel
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include "r8a774a1-hihope-rzg2m-rev2-ex.dts"
+#include "hihope-rzg2-ex-lvds.dtsi"
+#include "rzg2-advantech-idk-1110wr-panel.dtsi"
+
+&lvds0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2-ex.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2-ex.dts
new file mode 100644
index 000000000000..2221cf6aed21
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2-ex.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2M Rev.2.0 connected to sub board
+ *
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ */
+
+#include "r8a774a1-hihope-rzg2m-rev2.dts"
+#include "hihope-rzg2-ex.dtsi"
+
+/ {
+	model = "HopeRun HiHope RZ/G2M (Rev.2.0) with sub board";
+	compatible = "hoperun,hihope-rzg2-ex", "hoperun,hihope-rzg2m",
+		     "renesas,r8a774a1";
+};
+
+/* SW43 should be OFF, if in ON state SATA port will be activated */
+&pciec1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2.dts
new file mode 100644
index 000000000000..bb18f6ee2048
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-rev2.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2M Rev.2.0 main board
+ *
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a774a1.dtsi"
+#include "hihope-rev2.dtsi"
+
+/ {
+	model = "HopeRun HiHope RZ/G2M main board (Rev.2.0) based on r8a774a1";
+	compatible = "hoperun,hihope-rzg2m", "renesas,r8a774a1";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x0 0x80000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 722>,
+		 <&versaclock5 1>,
+		 <&x302_clk>,
+		 <&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.2",
+		      "dclkin.0", "dclkin.1", "dclkin.2";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts
index 96f2fb080a1a..25ae255de0f2 100644
--- a/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts
+++ b/arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts
@@ -1,13 +1,13 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Device Tree Source for the HiHope RZ/G2M main board
+ * Device Tree Source for the HiHope RZ/G2M Rev.3.0/4.0 main board
  *
- * Copyright (C) 2019 Renesas Electronics Corp.
+ * Copyright (C) 2020 Renesas Electronics Corp.
  */
 
 /dts-v1/;
 #include "r8a774a1.dtsi"
-#include "hihope-common.dtsi"
+#include "hihope-rev4.dtsi"
 
 / {
 	model = "HopeRun HiHope RZ/G2M main board based on r8a774a1";
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
index a603d947970e..8e80f50132ad 100644
--- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
@@ -10,6 +10,8 @@
 #include <dt-bindings/clock/r8a774a1-cpg-mssr.h>
 #include <dt-bindings/power/r8a774a1-sysc.h>
 
+#define CPG_AUDIO_CLK_I		R8A774A1_CLK_S0D4
+
 / {
 	compatible = "renesas,r8a774a1";
 	#address-cells = <2>;
@@ -2250,7 +2252,7 @@
 			status = "disabled";
 		};
 
-		sdhi0: sd@ee100000 {
+		sdhi0: mmc@ee100000 {
 			compatible = "renesas,sdhi-r8a774a1",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee100000 0 0x2000>;
@@ -2262,7 +2264,7 @@
 			status = "disabled";
 		};
 
-		sdhi1: sd@ee120000 {
+		sdhi1: mmc@ee120000 {
 			compatible = "renesas,sdhi-r8a774a1",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee120000 0 0x2000>;
@@ -2274,7 +2276,7 @@
 			status = "disabled";
 		};
 
-		sdhi2: sd@ee140000 {
+		sdhi2: mmc@ee140000 {
 			compatible = "renesas,sdhi-r8a774a1",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee140000 0 0x2000>;
@@ -2286,7 +2288,7 @@
 			status = "disabled";
 		};
 
-		sdhi3: sd@ee160000 {
+		sdhi3: mmc@ee160000 {
 			compatible = "renesas,sdhi-r8a774a1",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee160000 0 0x2000>;
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex-idk-1110wr.dts b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex-idk-1110wr.dts
new file mode 100644
index 000000000000..4b5154f029a5
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex-idk-1110wr.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2N Rev.3.0/4.0 with sub board connected
+ * to an Advantech IDK-1110WR 10.1" LVDS panel
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include "r8a774b1-hihope-rzg2n-ex.dts"
+#include "hihope-rzg2-ex-lvds.dtsi"
+#include "rzg2-advantech-idk-1110wr-panel.dtsi"
+
+&lvds0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex.dts b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex.dts
index ab47c0bd9c19..a3edd55113df 100644
--- a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex.dts
+++ b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-ex.dts
@@ -1,8 +1,9 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Device Tree Source for the HiHope RZ/G2N sub board
+ * Device Tree Source for the HiHope RZ/G2N Rev.3.0/4.0 connected to
+ * sub board
  *
- * Copyright (C) 2019 Renesas Electronics Corp.
+ * Copyright (C) 2020 Renesas Electronics Corp.
  */
 
 #include "r8a774b1-hihope-rzg2n.dts"
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2-ex-idk-1110wr.dts b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2-ex-idk-1110wr.dts
new file mode 100644
index 000000000000..e730b3b25dbe
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2-ex-idk-1110wr.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2N Rev.2.0 with sub board connected
+ * to an Advantech IDK-1110WR 10.1" LVDS panel
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include "r8a774b1-hihope-rzg2n-rev2-ex.dts"
+#include "hihope-rzg2-ex-lvds.dtsi"
+#include "rzg2-advantech-idk-1110wr-panel.dtsi"
+
+&lvds0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2-ex.dts b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2-ex.dts
new file mode 100644
index 000000000000..2e5e1de04049
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2-ex.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2N Rev.2.0 connected to sub board
+ *
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ */
+
+#include "r8a774b1-hihope-rzg2n-rev2.dts"
+#include "hihope-rzg2-ex.dtsi"
+
+/ {
+	model = "HopeRun HiHope RZ/G2N (Rev.2.0) with sub board";
+	compatible = "hoperun,hihope-rzg2-ex", "hoperun,hihope-rzg2n",
+		     "renesas,r8a774b1";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2.dts b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2.dts
new file mode 100644
index 000000000000..c69ca5cf6f77
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2N Rev.2.0 main board
+ *
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a774b1.dtsi"
+#include "hihope-rev2.dtsi"
+
+/ {
+	model = "HopeRun HiHope RZ/G2N main board (Rev.2.0) based on r8a774b1";
+	compatible = "hoperun,hihope-rzg2n", "renesas,r8a774b1";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	memory@480000000 {
+		device_type = "memory";
+		reg = <0x4 0x80000000 0x0 0x80000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 721>,
+		 <&versaclock5 1>,
+		 <&x302_clk>,
+		 <&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.3",
+		      "dclkin.0", "dclkin.1", "dclkin.3";
+};
+
+&sdhi3 {
+	mmc-hs400-1_8v;
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n.dts b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n.dts
index 9910c1aa0a61..f1883cbd1a82 100644
--- a/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n.dts
+++ b/arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n.dts
@@ -1,13 +1,13 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Device Tree Source for the HiHope RZ/G2N main board
+ * Device Tree Source for the HiHope RZ/G2N main board Rev.3.0/4.0
  *
- * Copyright (C) 2019 Renesas Electronics Corp.
+ * Copyright (C) 2020 Renesas Electronics Corp.
  */
 
 /dts-v1/;
 #include "r8a774b1.dtsi"
-#include "hihope-common.dtsi"
+#include "hihope-rev4.dtsi"
 
 / {
 	model = "HopeRun HiHope RZ/G2N main board based on r8a774b1";
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
index 1e51855c7cd3..49e5addcfd97 100644
--- a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
@@ -10,6 +10,8 @@
 #include <dt-bindings/clock/r8a774b1-cpg-mssr.h>
 #include <dt-bindings/power/r8a774b1-sysc.h>
 
+#define CPG_AUDIO_CLK_I		R8A774B1_CLK_S0D4
+
 / {
 	compatible = "renesas,r8a774b1";
 	#address-cells = <2>;
@@ -2108,7 +2110,7 @@
 			status = "disabled";
 		};
 
-		sdhi0: sd@ee100000 {
+		sdhi0: mmc@ee100000 {
 			compatible = "renesas,sdhi-r8a774b1",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee100000 0 0x2000>;
@@ -2120,7 +2122,7 @@
 			status = "disabled";
 		};
 
-		sdhi1: sd@ee120000 {
+		sdhi1: mmc@ee120000 {
 			compatible = "renesas,sdhi-r8a774b1",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee120000 0 0x2000>;
@@ -2132,7 +2134,7 @@
 			status = "disabled";
 		};
 
-		sdhi2: sd@ee140000 {
+		sdhi2: mmc@ee140000 {
 			compatible = "renesas,sdhi-r8a774b1",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee140000 0 0x2000>;
@@ -2144,7 +2146,7 @@
 			status = "disabled";
 		};
 
-		sdhi3: sd@ee160000 {
+		sdhi3: mmc@ee160000 {
 			compatible = "renesas,sdhi-r8a774b1",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee160000 0 0x2000>;
diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
index 5c72a7efbb03..42171190cce4 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -1618,7 +1618,7 @@
 			status = "disabled";
 		};
 
-		sdhi0: sd@ee100000 {
+		sdhi0: mmc@ee100000 {
 			compatible = "renesas,sdhi-r8a774c0",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee100000 0 0x2000>;
@@ -1630,7 +1630,7 @@
 			status = "disabled";
 		};
 
-		sdhi1: sd@ee120000 {
+		sdhi1: mmc@ee120000 {
 			compatible = "renesas,sdhi-r8a774c0",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee120000 0 0x2000>;
@@ -1642,7 +1642,7 @@
 			status = "disabled";
 		};
 
-		sdhi3: sd@ee160000 {
+		sdhi3: mmc@ee160000 {
 			compatible = "renesas,sdhi-r8a774c0",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee160000 0 0x2000>;
diff --git a/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h-ex.dts b/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h-ex.dts
new file mode 100644
index 000000000000..265355e0de5f
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h-ex.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2H sub board
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include "r8a774e1-hihope-rzg2h.dts"
+#include "hihope-rzg2-ex.dtsi"
+
+/ {
+	model = "HopeRun HiHope RZ/G2H with sub board";
+	compatible = "hoperun,hihope-rzg2-ex", "hoperun,hihope-rzg2h",
+		     "renesas,r8a774e1";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h.dts b/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h.dts
new file mode 100644
index 000000000000..cdbe527e9340
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774e1-hihope-rzg2h.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2H main board
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a774e1.dtsi"
+#include "hihope-rev4.dtsi"
+
+/ {
+	model = "HopeRun HiHope RZ/G2H main board based on r8a774e1";
+	compatible = "hoperun,hihope-rzg2h", "renesas,r8a774e1";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	memory@500000000 {
+		device_type = "memory";
+		reg = <0x5 0x00000000 0x0 0x80000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
new file mode 100644
index 000000000000..0f86cfd52425
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
@@ -0,0 +1,1664 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the r8a774e1 SoC
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/r8a774e1-cpg-mssr.h>
+#include <dt-bindings/power/r8a774e1-sysc.h>
+
+#define CPG_AUDIO_CLK_I		R8A774E1_CLK_S0D4
+
+/ {
+	compatible = "renesas,r8a774e1";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	/*
+	 * The external audio clocks are configured as 0 Hz fixed frequency
+	 * clocks by default.
+	 * Boards that provide audio clocks should override them.
+	 */
+	audio_clk_a: audio_clk_a {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	audio_clk_c: audio_clk_c {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	/* External CAN clock - to be overridden by boards that provide it */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	cluster0_opp: opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+			opp-suspend;
+		};
+	};
+
+	cluster1_opp: opp_table1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <820000>;
+			clock-latency-ns = <300000>;
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&a57_0>;
+				};
+				core1 {
+					cpu = <&a57_1>;
+				};
+				core2 {
+					cpu = <&a57_2>;
+				};
+				core3 {
+					cpu = <&a57_3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&a53_0>;
+				};
+				core1 {
+					cpu = <&a53_1>;
+				};
+				core2 {
+					cpu = <&a53_2>;
+				};
+				core3 {
+					cpu = <&a53_3>;
+				};
+			};
+		};
+
+		a57_0: cpu@0 {
+			compatible = "arm,cortex-a57";
+			reg = <0x0>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774E1_PD_CA57_CPU0>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			dynamic-power-coefficient = <854>;
+			clocks = <&cpg CPG_CORE R8A774E1_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+		};
+
+		a57_1: cpu@1 {
+			compatible = "arm,cortex-a57";
+			reg = <0x1>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774E1_PD_CA57_CPU1>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R8A774E1_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+		};
+
+		a57_2: cpu@2 {
+			compatible = "arm,cortex-a57";
+			reg = <0x2>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774E1_PD_CA57_CPU2>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R8A774E1_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+		};
+
+		a57_3: cpu@3 {
+			compatible = "arm,cortex-a57";
+			reg = <0x3>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774E1_PD_CA57_CPU3>;
+			next-level-cache = <&L2_CA57>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R8A774E1_CLK_Z>;
+			operating-points-v2 = <&cluster0_opp>;
+			capacity-dmips-mhz = <1024>;
+			#cooling-cells = <2>;
+		};
+
+		a53_0: cpu@100 {
+			compatible = "arm,cortex-a53";
+			reg = <0x100>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774E1_PD_CA53_CPU0>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			dynamic-power-coefficient = <277>;
+			clocks = <&cpg CPG_CORE R8A774E1_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <535>;
+		};
+
+		a53_1: cpu@101 {
+			compatible = "arm,cortex-a53";
+			reg = <0x101>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774E1_PD_CA53_CPU1>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R8A774E1_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <535>;
+		};
+
+		a53_2: cpu@102 {
+			compatible = "arm,cortex-a53";
+			reg = <0x102>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774E1_PD_CA53_CPU2>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R8A774E1_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <535>;
+		};
+
+		a53_3: cpu@103 {
+			compatible = "arm,cortex-a53";
+			reg = <0x103>;
+			device_type = "cpu";
+			power-domains = <&sysc R8A774E1_PD_CA53_CPU3>;
+			next-level-cache = <&L2_CA53>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R8A774E1_CLK_Z2>;
+			operating-points-v2 = <&cluster1_opp>;
+			capacity-dmips-mhz = <535>;
+		};
+
+		L2_CA57: cache-controller-0 {
+			compatible = "cache";
+			power-domains = <&sysc R8A774E1_PD_CA57_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		L2_CA53: cache-controller-1 {
+			compatible = "cache";
+			power-domains = <&sysc R8A774E1_PD_CA53_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	extalr_clk: extalr {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	/* External PCIe clock - can be overridden by the board */
+	pcie_bus_clk: pcie_bus {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	pmu_a53 {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&a53_0>, <&a53_1>, <&a53_2>, <&a53_3>;
+	};
+
+	pmu_a57 {
+		compatible = "arm,cortex-a57-pmu";
+		interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&a57_0>, <&a57_1>, <&a57_2>, <&a57_3>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	/* External SCIF clock - to be overridden by boards that provide it */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a774e1-wdt",
+				     "renesas,rcar-gen3-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 402>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 402>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a774e1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a774e1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 29>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a774e1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 15>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a774e1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 16>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a774e1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 18>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a774e1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 26>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+		};
+
+		gpio6: gpio@e6055400 {
+			compatible = "renesas,gpio-r8a774e1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055400 0 0x50>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 192 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 906>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 906>;
+		};
+
+		gpio7: gpio@e6055800 {
+			compatible = "renesas,gpio-r8a774e1",
+				     "renesas,rcar-gen3-gpio";
+			reg = <0 0xe6055800 0 0x50>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 224 4>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 905>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 905>;
+		};
+
+		pfc: pin-controller@e6060000 {
+			compatible = "renesas,pfc-r8a774e1";
+			reg = <0 0xe6060000 0 0x50c>;
+		};
+
+		cmt0: timer@e60f0000 {
+			compatible = "renesas,r8a774e1-cmt0",
+				     "renesas,rcar-gen3-cmt0";
+			reg = <0 0xe60f0000 0 0x1004>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 303>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 303>;
+			status = "disabled";
+		};
+
+		cmt1: timer@e6130000 {
+			compatible = "renesas,r8a774e1-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6130000 0 0x1004>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 302>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 302>;
+			status = "disabled";
+		};
+
+		cmt2: timer@e6140000 {
+			compatible = "renesas,r8a774e1-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6140000 0 0x1004>;
+			interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 301>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 301>;
+			status = "disabled";
+		};
+
+		cmt3: timer@e6148000 {
+			compatible = "renesas,r8a774e1-cmt1",
+				     "renesas,rcar-gen3-cmt1";
+			reg = <0 0xe6148000 0 0x1004>;
+			interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 300>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 300>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a774e1-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>, <&extalr_clk>;
+			clock-names = "extal", "extalr";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a774e1-rst";
+			reg = <0 0xe6160000 0 0x0200>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a774e1-sysc";
+			reg = <0 0xe6180000 0 0x0400>;
+			#power-domain-cells = <1>;
+		};
+
+		tsc: thermal@e6198000 {
+			compatible = "renesas,r8a774e1-thermal";
+			reg = <0 0xe6198000 0 0x100>,
+			      <0 0xe61a0000 0 0x100>,
+			      <0 0xe61a8000 0 0x100>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 522>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 522>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		intc_ex: interrupt-controller@e61c0000 {
+			compatible = "renesas,intc-ex-r8a774e1", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
+		tmu0: timer@e61e0000 {
+			compatible = "renesas,tmu-r8a774e1", "renesas,tmu";
+			reg = <0 0xe61e0000 0 0x30>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 125>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 125>;
+			status = "disabled";
+		};
+
+		tmu1: timer@e6fc0000 {
+			compatible = "renesas,tmu-r8a774e1", "renesas,tmu";
+			reg = <0 0xe6fc0000 0 0x30>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 124>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 124>;
+			status = "disabled";
+		};
+
+		tmu2: timer@e6fd0000 {
+			compatible = "renesas,tmu-r8a774e1", "renesas,tmu";
+			reg = <0 0xe6fd0000 0 0x30>;
+			interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 123>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 123>;
+			status = "disabled";
+		};
+
+		tmu3: timer@e6fe0000 {
+			compatible = "renesas,tmu-r8a774e1", "renesas,tmu";
+			reg = <0 0xe6fe0000 0 0x30>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 122>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 122>;
+			status = "disabled";
+		};
+
+		tmu4: timer@ffc00000 {
+			compatible = "renesas,tmu-r8a774e1", "renesas,tmu";
+			reg = <0 0xffc00000 0 0x30>;
+			interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 121>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 121>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@e6500000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774e1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6500000 0 0x40>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 931>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 931>;
+			dmas = <&dmac1 0x91>, <&dmac1 0x90>,
+			       <&dmac2 0x91>, <&dmac2 0x90>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@e6508000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774e1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6508000 0 0x40>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 930>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 930>;
+			dmas = <&dmac1 0x93>, <&dmac1 0x92>,
+			       <&dmac2 0x93>, <&dmac2 0x92>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@e6510000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774e1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe6510000 0 0x40>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 929>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 929>;
+			dmas = <&dmac1 0x95>, <&dmac1 0x94>,
+			       <&dmac2 0x95>, <&dmac2 0x94>;
+			dma-names = "tx", "rx", "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@e66d0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774e1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d0000 0 0x40>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 928>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 928>;
+			dmas = <&dmac0 0x97>, <&dmac0 0x96>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@e66d8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774e1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66d8000 0 0x40>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 927>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 927>;
+			dmas = <&dmac0 0x99>, <&dmac0 0x98>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@e66e0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774e1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e0000 0 0x40>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 919>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 919>;
+			dmas = <&dmac0 0x9b>, <&dmac0 0x9a>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <110>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@e66e8000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,i2c-r8a774e1",
+				     "renesas,rcar-gen3-i2c";
+			reg = <0 0xe66e8000 0 0x40>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 918>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 918>;
+			dmas = <&dmac0 0x9d>, <&dmac0 0x9c>;
+			dma-names = "tx", "rx";
+			i2c-scl-internal-delay-ns = <6>;
+			status = "disabled";
+		};
+
+		i2c_dvfs: i2c@e60b0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "renesas,iic-r8a774e1",
+				     "renesas,rcar-gen3-iic",
+				     "renesas,rmobile-iic";
+			reg = <0 0xe60b0000 0 0x425>;
+			interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 926>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 926>;
+			dmas = <&dmac0 0x11>, <&dmac0 0x10>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		hscif0: serial@e6540000 {
+			compatible = "renesas,hscif-r8a774e1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6540000 0 0x60>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 520>,
+				 <&cpg CPG_CORE R8A774E1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x31>, <&dmac1 0x30>,
+			       <&dmac2 0x31>, <&dmac2 0x30>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 520>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e6550000 {
+			compatible = "renesas,hscif-r8a774e1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6550000 0 0x60>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 519>,
+				 <&cpg CPG_CORE R8A774E1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x33>, <&dmac1 0x32>,
+			       <&dmac2 0x33>, <&dmac2 0x32>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 519>;
+			status = "disabled";
+		};
+
+		hscif2: serial@e6560000 {
+			compatible = "renesas,hscif-r8a774e1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe6560000 0 0x60>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 518>,
+				 <&cpg CPG_CORE R8A774E1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x35>, <&dmac1 0x34>,
+			       <&dmac2 0x35>, <&dmac2 0x34>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 518>;
+			status = "disabled";
+		};
+
+		hscif3: serial@e66a0000 {
+			compatible = "renesas,hscif-r8a774e1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66a0000 0 0x60>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 517>,
+				 <&cpg CPG_CORE R8A774E1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x37>, <&dmac0 0x36>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 517>;
+			status = "disabled";
+		};
+
+		hscif4: serial@e66b0000 {
+			compatible = "renesas,hscif-r8a774e1",
+				     "renesas,rcar-gen3-hscif",
+				     "renesas,hscif";
+			reg = <0 0xe66b0000 0 0x60>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 516>,
+				 <&cpg CPG_CORE R8A774E1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x38>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 516>;
+			status = "disabled";
+		};
+
+		hsusb: usb@e6590000 {
+			reg = <0 0xe6590000 0 0x200>;
+			status = "disabled";
+
+			/* placeholder */
+		};
+
+		usb3_phy0: usb-phy@e65ee000 {
+			reg = <0 0xe65ee000 0 0x90>;
+			#phy-cells = <0>;
+			status = "disabled";
+
+			/* placeholder */
+		};
+
+		dmac0: dma-controller@e6700000 {
+			compatible = "renesas,dmac-r8a774e1",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x10000>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 219>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 219>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>,
+				 <&ipmmu_ds0 2>, <&ipmmu_ds0 3>,
+				 <&ipmmu_ds0 4>, <&ipmmu_ds0 5>,
+				 <&ipmmu_ds0 6>, <&ipmmu_ds0 7>,
+				 <&ipmmu_ds0 8>, <&ipmmu_ds0 9>,
+				 <&ipmmu_ds0 10>, <&ipmmu_ds0 11>,
+				 <&ipmmu_ds0 12>, <&ipmmu_ds0 13>,
+				 <&ipmmu_ds0 14>, <&ipmmu_ds0 15>;
+		};
+
+		dmac1: dma-controller@e7300000 {
+			compatible = "renesas,dmac-r8a774e1",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7300000 0 0x10000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>,
+				 <&ipmmu_ds1 2>, <&ipmmu_ds1 3>,
+				 <&ipmmu_ds1 4>, <&ipmmu_ds1 5>,
+				 <&ipmmu_ds1 6>, <&ipmmu_ds1 7>,
+				 <&ipmmu_ds1 8>, <&ipmmu_ds1 9>,
+				 <&ipmmu_ds1 10>, <&ipmmu_ds1 11>,
+				 <&ipmmu_ds1 12>, <&ipmmu_ds1 13>,
+				 <&ipmmu_ds1 14>, <&ipmmu_ds1 15>;
+		};
+
+		dmac2: dma-controller@e7310000 {
+			compatible = "renesas,dmac-r8a774e1",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe7310000 0 0x10000>;
+			interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 217>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 217>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>,
+				 <&ipmmu_ds1 18>, <&ipmmu_ds1 19>,
+				 <&ipmmu_ds1 20>, <&ipmmu_ds1 21>,
+				 <&ipmmu_ds1 22>, <&ipmmu_ds1 23>,
+				 <&ipmmu_ds1 24>, <&ipmmu_ds1 25>,
+				 <&ipmmu_ds1 26>, <&ipmmu_ds1 27>,
+				 <&ipmmu_ds1 28>, <&ipmmu_ds1 29>,
+				 <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
+		};
+
+		ipmmu_ds0: iommu@e6740000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xe6740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 0>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ds1: iommu@e7740000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xe7740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 1>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_hc: iommu@e6570000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xe6570000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 2>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: iommu@e67b0000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xe67b0000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mp0: iommu@ec670000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xec670000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 4>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv0: iommu@fd800000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xfd800000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 6>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv1: iommu@fd950000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xfd950000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 7>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv2: iommu@fd960000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xfd960000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 8>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv3: iommu@fd970000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xfd970000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 9>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc0: iommu@fe6b0000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xfe6b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 12>;
+			power-domains = <&sysc R8A774E1_PD_A3VC>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc1: iommu@fe6f0000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xfe6f0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 13>;
+			power-domains = <&sysc R8A774E1_PD_A3VC>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi0: iommu@febd0000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xfebd0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 14>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi1: iommu@febe0000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xfebe0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 15>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vp0: iommu@fe990000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xfe990000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 16>;
+			power-domains = <&sysc R8A774E1_PD_A3VP>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vp1: iommu@fe980000 {
+			compatible = "renesas,ipmmu-r8a774e1";
+			reg = <0 0xfe980000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 17>;
+			power-domains = <&sysc R8A774E1_PD_A3VP>;
+			#iommu-cells = <1>;
+		};
+
+		avb: ethernet@e6800000 {
+			compatible = "renesas,etheravb-r8a774e1",
+				     "renesas,etheravb-rcar-gen3";
+			reg = <0 0xe6800000 0 0x800>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15",
+					  "ch16", "ch17", "ch18", "ch19",
+					  "ch20", "ch21", "ch22", "ch23",
+					  "ch24";
+			clocks = <&cpg CPG_MOD 812>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 812>;
+			phy-mode = "rgmii";
+			iommus = <&ipmmu_ds0 16>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		can0: can@e6c30000 {
+			compatible = "renesas,can-r8a774e1",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c30000 0 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 916>,
+				 <&cpg CPG_CORE R8A774E1_CLK_CANFD>,
+				 <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A774E1_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 916>;
+			status = "disabled";
+		};
+
+		can1: can@e6c38000 {
+			compatible = "renesas,can-r8a774e1",
+				     "renesas,rcar-gen3-can";
+			reg = <0 0xe6c38000 0 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 915>,
+				 <&cpg CPG_CORE R8A774E1_CLK_CANFD>,
+				 <&can_clk>;
+			clock-names = "clkp1", "clkp2", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A774E1_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 915>;
+			status = "disabled";
+		};
+
+		canfd: can@e66c0000 {
+			compatible = "renesas,r8a774e1-canfd",
+				     "renesas,rcar-gen3-canfd";
+			reg = <0 0xe66c0000 0 0x8000>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 914>,
+				 <&cpg CPG_CORE R8A774E1_CLK_CANFD>,
+				 <&can_clk>;
+			clock-names = "fck", "canfd", "can_clk";
+			assigned-clocks = <&cpg CPG_CORE R8A774E1_CLK_CANFD>;
+			assigned-clock-rates = <40000000>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 914>;
+			status = "disabled";
+
+			channel0 {
+				status = "disabled";
+			};
+
+			channel1 {
+				status = "disabled";
+			};
+		};
+
+		pwm0: pwm@e6e30000 {
+			reg = <0 0xe6e30000 0 0x8>;
+			#pwm-cells = <2>;
+			status = "disabled";
+
+			/* placeholder */
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a774e1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 0x40>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>,
+				 <&cpg CPG_CORE R8A774E1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x51>, <&dmac1 0x50>,
+			       <&dmac2 0x51>, <&dmac2 0x50>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a774e1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 0x40>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>,
+				 <&cpg CPG_CORE R8A774E1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x53>, <&dmac1 0x52>,
+			       <&dmac2 0x53>, <&dmac2 0x52>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
+			status = "disabled";
+		};
+
+		scif2: serial@e6e88000 {
+			compatible = "renesas,scif-r8a774e1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6e88000 0 0x40>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 310>,
+				 <&cpg CPG_CORE R8A774E1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x13>, <&dmac1 0x12>,
+			       <&dmac2 0x13>, <&dmac2 0x12>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 310>;
+			status = "disabled";
+		};
+
+		scif3: serial@e6c50000 {
+			compatible = "renesas,scif-r8a774e1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c50000 0 0x40>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>,
+				 <&cpg CPG_CORE R8A774E1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x57>, <&dmac0 0x56>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
+			status = "disabled";
+		};
+
+		scif4: serial@e6c40000 {
+			compatible = "renesas,scif-r8a774e1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6c40000 0 0x40>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>,
+				 <&cpg CPG_CORE R8A774E1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x59>, <&dmac0 0x58>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
+			status = "disabled";
+		};
+
+		scif5: serial@e6f30000 {
+			compatible = "renesas,scif-r8a774e1",
+				     "renesas,rcar-gen3-scif", "renesas,scif";
+			reg = <0 0xe6f30000 0 0x40>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 202>,
+				 <&cpg CPG_CORE R8A774E1_CLK_S3D1>,
+				 <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x5b>, <&dmac1 0x5a>,
+			       <&dmac2 0x5b>, <&dmac2 0x5a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 202>;
+			status = "disabled";
+		};
+
+		msiof0: spi@e6e90000 {
+			compatible = "renesas,msiof-r8a774e1",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6e90000 0 0x0064>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 211>;
+			dmas = <&dmac1 0x41>, <&dmac1 0x40>,
+			       <&dmac2 0x41>, <&dmac2 0x40>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 211>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof1: spi@e6ea0000 {
+			compatible = "renesas,msiof-r8a774e1",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6ea0000 0 0x0064>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 210>;
+			dmas = <&dmac1 0x43>, <&dmac1 0x42>,
+			       <&dmac2 0x43>, <&dmac2 0x42>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 210>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof2: spi@e6c00000 {
+			compatible = "renesas,msiof-r8a774e1",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c00000 0 0x0064>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 209>;
+			dmas = <&dmac0 0x45>, <&dmac0 0x44>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 209>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		msiof3: spi@e6c10000 {
+			compatible = "renesas,msiof-r8a774e1",
+				     "renesas,rcar-gen3-msiof";
+			reg = <0 0xe6c10000 0 0x0064>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 208>;
+			dmas = <&dmac0 0x47>, <&dmac0 0x46>;
+			dma-names = "tx", "rx";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 208>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		rcar_sound: sound@ec500000 {
+			reg = <0 0xec500000 0 0x1000>, /* SCU */
+			      <0 0xec5a0000 0 0x100>,  /* ADG */
+			      <0 0xec540000 0 0x1000>, /* SSIU */
+			      <0 0xec541000 0 0x280>,  /* SSI */
+			      <0 0xec760000 0 0x200>;  /* Audio DMAC peri peri*/
+			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+			status = "disabled";
+
+			/* placeholder */
+
+			rcar_sound,ssi {
+				ssi2: ssi-2 {
+					/* placeholder */
+				};
+			};
+		};
+
+		xhci0: usb@ee000000 {
+			reg = <0 0xee000000 0 0xc00>;
+			status = "disabled";
+
+			/* placeholder */
+		};
+
+		usb3_peri0: usb@ee020000 {
+			reg = <0 0xee020000 0 0x400>;
+			status = "disabled";
+
+			/* placeholder */
+		};
+
+		ohci0: usb@ee080000 {
+			reg = <0 0xee080000 0 0x100>;
+			status = "disabled";
+
+			/* placeholder */
+		};
+
+		ohci1: usb@ee0a0000 {
+			reg = <0 0xee0a0000 0 0x100>;
+			status = "disabled";
+
+			/* placeholder */
+		};
+
+		ehci0: usb@ee080100 {
+			reg = <0 0xee080100 0 0x100>;
+			status = "disabled";
+
+			/* placeholder */
+		};
+
+		ehci1: usb@ee0a0100 {
+			reg = <0 0xee0a0100 0 0x100>;
+			status = "disabled";
+
+			/* placeholder */
+		};
+
+		usb2_phy0: usb-phy@ee080200 {
+			reg = <0 0xee080200 0 0x700>;
+			status = "disabled";
+
+			/* placeholder */
+		};
+
+		usb2_phy1: usb-phy@ee0a0200 {
+			reg = <0 0xee0a0200 0 0x700>;
+			status = "disabled";
+
+			/* placeholder */
+		};
+
+		sdhi0: mmc@ee100000 {
+			compatible = "renesas,sdhi-r8a774e1",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee100000 0 0x2000>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 314>;
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 314>;
+			iommus = <&ipmmu_ds1 32>;
+			status = "disabled";
+		};
+
+		sdhi1: mmc@ee120000 {
+			compatible = "renesas,sdhi-r8a774e1",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee120000 0 0x2000>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 313>;
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 313>;
+			iommus = <&ipmmu_ds1 33>;
+			status = "disabled";
+		};
+
+		sdhi2: mmc@ee140000 {
+			compatible = "renesas,sdhi-r8a774e1",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee140000 0 0x2000>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 312>;
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 312>;
+			iommus = <&ipmmu_ds1 34>;
+			status = "disabled";
+		};
+
+		sdhi3: mmc@ee160000 {
+			compatible = "renesas,sdhi-r8a774e1",
+				     "renesas,rcar-gen3-sdhi";
+			reg = <0 0xee160000 0 0x2000>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 311>;
+			max-frequency = <200000000>;
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 311>;
+			iommus = <&ipmmu_ds1 35>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@f1010000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xf1010000 0 0x1000>,
+			      <0x0 0xf1020000 0 0x20000>,
+			      <0x0 0xf1040000 0 0x20000>,
+			      <0x0 0xf1060000 0 0x20000>;
+			interrupts = <GIC_PPI 9
+					(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&cpg CPG_MOD 408>;
+			clock-names = "clk";
+			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+			resets = <&cpg 408>;
+		};
+
+		pciec0: pcie@fe000000 {
+			reg = <0 0xfe000000 0 0x80000>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			status = "disabled";
+
+			/* placeholder */
+		};
+
+		hdmi0: hdmi@fead0000 {
+			reg = <0 0xfead0000 0 0x10000>;
+			status = "disabled";
+
+			/* placeholder */
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+				port@1 {
+					reg = <1>;
+				};
+				port@2 {
+					reg = <2>;
+				};
+			};
+		};
+
+		du: display@feb00000 {
+			reg = <0 0xfeb00000 0 0x80000>;
+			status = "disabled";
+
+			/* placeholder */
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+				port@1 {
+					reg = <1>;
+				};
+				port@2 {
+					reg = <2>;
+				};
+			};
+		};
+
+		prr: chipid@fff00044 {
+			compatible = "renesas,prr";
+			reg = <0 0xfff00044 0 4>;
+		};
+	};
+
+	thermal-zones {
+		sensor_thermal1: sensor-thermal1 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 0>;
+			sustainable-power = <6313>;
+
+			trips {
+				sensor1_crit: sensor1-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor_thermal2: sensor-thermal2 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 1>;
+			sustainable-power = <6313>;
+
+			trips {
+				sensor2_crit: sensor2-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		sensor_thermal3: sensor-thermal3 {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsc 2>;
+			sustainable-power = <6313>;
+
+			trips {
+				target: trip-point1 {
+					temperature = <100000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				sensor3_crit: sensor3-crit {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&a57_0 0 2>;
+					contribution = <1024>;
+				};
+
+				map1 {
+					trip = <&target>;
+					cooling-device = <&a53_0 0 2>;
+					contribution = <1024>;
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	/* External USB clocks - can be overridden by the board */
+	usb3s0_clk: usb3s0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	usb_extal_clk: usb_extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a77951.dtsi b/arch/arm64/boot/dts/renesas/r8a77951.dtsi
index 61d67d9714ab..9beb8e76d923 100644
--- a/arch/arm64/boot/dts/renesas/r8a77951.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77951.dtsi
@@ -2590,7 +2590,7 @@
 			status = "disabled";
 		};
 
-		sdhi0: sd@ee100000 {
+		sdhi0: mmc@ee100000 {
 			compatible = "renesas,sdhi-r8a7795",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee100000 0 0x2000>;
@@ -2603,7 +2603,7 @@
 			status = "disabled";
 		};
 
-		sdhi1: sd@ee120000 {
+		sdhi1: mmc@ee120000 {
 			compatible = "renesas,sdhi-r8a7795",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee120000 0 0x2000>;
@@ -2616,7 +2616,7 @@
 			status = "disabled";
 		};
 
-		sdhi2: sd@ee140000 {
+		sdhi2: mmc@ee140000 {
 			compatible = "renesas,sdhi-r8a7795",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee140000 0 0x2000>;
@@ -2629,7 +2629,7 @@
 			status = "disabled";
 		};
 
-		sdhi3: sd@ee160000 {
+		sdhi3: mmc@ee160000 {
 			compatible = "renesas,sdhi-r8a7795",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee160000 0 0x2000>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77960.dtsi b/arch/arm64/boot/dts/renesas/r8a77960.dtsi
index 33bf62acffbb..4dfb7f076787 100644
--- a/arch/arm64/boot/dts/renesas/r8a77960.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77960.dtsi
@@ -2394,7 +2394,7 @@
 			status = "disabled";
 		};
 
-		sdhi0: sd@ee100000 {
+		sdhi0: mmc@ee100000 {
 			compatible = "renesas,sdhi-r8a7796",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee100000 0 0x2000>;
@@ -2407,7 +2407,7 @@
 			status = "disabled";
 		};
 
-		sdhi1: sd@ee120000 {
+		sdhi1: mmc@ee120000 {
 			compatible = "renesas,sdhi-r8a7796",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee120000 0 0x2000>;
@@ -2420,7 +2420,7 @@
 			status = "disabled";
 		};
 
-		sdhi2: sd@ee140000 {
+		sdhi2: mmc@ee140000 {
 			compatible = "renesas,sdhi-r8a7796",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee140000 0 0x2000>;
@@ -2433,7 +2433,7 @@
 			status = "disabled";
 		};
 
-		sdhi3: sd@ee160000 {
+		sdhi3: mmc@ee160000 {
 			compatible = "renesas,sdhi-r8a7796",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee160000 0 0x2000>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77961.dtsi b/arch/arm64/boot/dts/renesas/r8a77961.dtsi
index 760e738b75b3..542c44c7dbca 100644
--- a/arch/arm64/boot/dts/renesas/r8a77961.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77961.dtsi
@@ -883,6 +883,95 @@
 			dma-channels = <16>;
 		};
 
+		ipmmu_ds0: iommu@e6740000 {
+			compatible = "renesas,ipmmu-r8a77961";
+			reg = <0 0xe6740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 0>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ds1: iommu@e7740000 {
+			compatible = "renesas,ipmmu-r8a77961";
+			reg = <0 0xe7740000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 1>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_hc: iommu@e6570000 {
+			compatible = "renesas,ipmmu-r8a77961";
+			reg = <0 0xe6570000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 2>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_ir: iommu@ff8b0000 {
+			compatible = "renesas,ipmmu-r8a77961";
+			reg = <0 0xff8b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 3>;
+			power-domains = <&sysc R8A77961_PD_A3IR>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mm: iommu@e67b0000 {
+			compatible = "renesas,ipmmu-r8a77961";
+			reg = <0 0xe67b0000 0 0x1000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_mp: iommu@ec670000 {
+			compatible = "renesas,ipmmu-r8a77961";
+			reg = <0 0xec670000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 4>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv0: iommu@fd800000 {
+			compatible = "renesas,ipmmu-r8a77961";
+			reg = <0 0xfd800000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 5>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_pv1: iommu@fd950000 {
+			compatible = "renesas,ipmmu-r8a77961";
+			reg = <0 0xfd950000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 6>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_rt: iommu@ffc80000 {
+			compatible = "renesas,ipmmu-r8a77961";
+			reg = <0 0xffc80000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 7>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vc0: iommu@fe6b0000 {
+			compatible = "renesas,ipmmu-r8a77961";
+			reg = <0 0xfe6b0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 8>;
+			power-domains = <&sysc R8A77961_PD_A3VC>;
+			#iommu-cells = <1>;
+		};
+
+		ipmmu_vi0: iommu@febd0000 {
+			compatible = "renesas,ipmmu-r8a77961";
+			reg = <0 0xfebd0000 0 0x1000>;
+			renesas,ipmmu-main = <&ipmmu_mm 9>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			#iommu-cells = <1>;
+		};
+
 		avb: ethernet@e6800000 {
 			compatible = "renesas,etheravb-r8a77961",
 				     "renesas,etheravb-rcar-gen3";
@@ -1257,7 +1346,7 @@
 			status = "disabled";
 		};
 
-		sdhi0: sd@ee100000 {
+		sdhi0: mmc@ee100000 {
 			compatible = "renesas,sdhi-r8a77961",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee100000 0 0x2000>;
@@ -1269,7 +1358,7 @@
 			status = "disabled";
 		};
 
-		sdhi1: sd@ee120000 {
+		sdhi1: mmc@ee120000 {
 			compatible = "renesas,sdhi-r8a77961",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee120000 0 0x2000>;
@@ -1281,7 +1370,7 @@
 			status = "disabled";
 		};
 
-		sdhi2: sd@ee140000 {
+		sdhi2: mmc@ee140000 {
 			compatible = "renesas,sdhi-r8a77961",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee140000 0 0x2000>;
@@ -1293,7 +1382,7 @@
 			status = "disabled";
 		};
 
-		sdhi3: sd@ee160000 {
+		sdhi3: mmc@ee160000 {
 			compatible = "renesas,sdhi-r8a77961",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee160000 0 0x2000>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
index 6f7ab39fd282..fe4dc12e2bdf 100644
--- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
@@ -2120,7 +2120,7 @@
 			status = "disabled";
 		};
 
-		sdhi0: sd@ee100000 {
+		sdhi0: mmc@ee100000 {
 			compatible = "renesas,sdhi-r8a77965",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee100000 0 0x2000>;
@@ -2133,7 +2133,7 @@
 			status = "disabled";
 		};
 
-		sdhi1: sd@ee120000 {
+		sdhi1: mmc@ee120000 {
 			compatible = "renesas,sdhi-r8a77965",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee120000 0 0x2000>;
@@ -2146,7 +2146,7 @@
 			status = "disabled";
 		};
 
-		sdhi2: sd@ee140000 {
+		sdhi2: mmc@ee140000 {
 			compatible = "renesas,sdhi-r8a77965",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee140000 0 0x2000>;
@@ -2159,7 +2159,7 @@
 			status = "disabled";
 		};
 
-		sdhi3: sd@ee160000 {
+		sdhi3: mmc@ee160000 {
 			compatible = "renesas,sdhi-r8a77965",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee160000 0 0x2000>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
index ac2156ab3e62..5c28f303e911 100644
--- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
@@ -187,12 +187,79 @@
 		function = "i2c0";
 	};
 
+	qspi0_pins: qspi0 {
+		groups = "qspi0_ctrl", "qspi0_data4";
+		function = "qspi0";
+	};
+
 	scif0_pins: scif0 {
 		groups = "scif0_data";
 		function = "scif0";
 	};
 };
 
+&rpc {
+	pinctrl-0 = <&qspi0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash@0 {
+		compatible = "spansion,s25fs512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bootparam@0 {
+				reg = <0x00000000 0x040000>;
+				read-only;
+			};
+			cr7@40000 {
+				reg = <0x00040000 0x080000>;
+				read-only;
+			};
+			cert_header_sa3@c0000 {
+				reg = <0x000c0000 0x080000>;
+				read-only;
+			};
+			bl2@140000 {
+				reg = <0x00140000 0x040000>;
+				read-only;
+			};
+			cert_header_sa6@180000 {
+				reg = <0x00180000 0x040000>;
+				read-only;
+			};
+			bl31@1c0000 {
+				reg = <0x001c0000 0x460000>;
+				read-only;
+			};
+			uboot@640000 {
+				reg = <0x00640000 0x0c0000>;
+				read-only;
+			};
+			uboot-env@700000 {
+				reg = <0x00700000 0x040000>;
+				read-only;
+			};
+			dtb@740000 {
+				reg = <0x00740000 0x080000>;
+			};
+			kernel@7c0000 {
+				reg = <0x007c0000 0x1400000>;
+			};
+			user@1bc0000 {
+				reg = <0x01bc0000 0x2440000>;
+			};
+		};
+	};
+};
+
 &rwdt {
 	timeout-sec = <60>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
index 01c4ba0f7be1..668a1ece9af0 100644
--- a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
@@ -212,12 +212,79 @@
 		power-source = <3300>;
 	};
 
+	qspi0_pins: qspi0 {
+		groups = "qspi0_ctrl", "qspi0_data4";
+		function = "qspi0";
+	};
+
 	scif0_pins: scif0 {
 		groups = "scif0_data";
 		function = "scif0";
 	};
 };
 
+&rpc {
+	pinctrl-0 = <&qspi0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash@0 {
+		compatible = "spansion,s25fs512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bootparam@0 {
+				reg = <0x00000000 0x040000>;
+				read-only;
+			};
+			cr7@40000 {
+				reg = <0x00040000 0x080000>;
+				read-only;
+			};
+			cert_header_sa3@c0000 {
+				reg = <0x000c0000 0x080000>;
+				read-only;
+			};
+			bl2@140000 {
+				reg = <0x00140000 0x040000>;
+				read-only;
+			};
+			cert_header_sa6@180000 {
+				reg = <0x00180000 0x040000>;
+				read-only;
+			};
+			bl31@1c0000 {
+				reg = <0x001c0000 0x460000>;
+				read-only;
+			};
+			uboot@640000 {
+				reg = <0x00640000 0x0c0000>;
+				read-only;
+			};
+			uboot-env@700000 {
+				reg = <0x00700000 0x040000>;
+				read-only;
+			};
+			dtb@740000 {
+				reg = <0x00740000 0x080000>;
+			};
+			kernel@7c0000 {
+				reg = <0x007c0000 0x1400000>;
+			};
+			user@1bc0000 {
+				reg = <0x01bc0000 0x2440000>;
+			};
+		};
+	};
+};
+
 &scif0 {
 	pinctrl-0 = <&scif0_pins>;
 	pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
index bd95ecb1b40d..2b9124a5ca86 100644
--- a/arch/arm64/boot/dts/renesas/r8a77970.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
@@ -1039,6 +1039,23 @@
 			status = "disabled";
 		};
 
+		rpc: spi@ee200000 {
+			compatible = "renesas,r8a77970-rpc-if",
+				     "renesas,rcar-gen3-rpc-if";
+			reg = <0 0xee200000 0 0x200>,
+			      <0 0x08000000 0 0x4000000>,
+			      <0 0xee208000 0 0x100>;
+			reg-names = "regs", "dirmap", "wbuf";
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 917>;
+			clock-names = "rpc";
+			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
+			resets = <&cpg 917>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		gic: interrupt-controller@f1010000 {
 			compatible = "arm,gic-400";
 			#interrupt-cells = <3>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
index ef8350a062af..422ec53740cb 100644
--- a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
@@ -262,6 +262,11 @@
 		power-source = <1800>;
 	};
 
+	qspi0_pins: qspi0 {
+		groups = "qspi0_ctrl", "qspi0_data4";
+		function = "qspi0";
+	};
+
 	scif0_pins: scif0 {
 		groups = "scif0_data";
 		function = "scif0";
@@ -273,6 +278,68 @@
 	};
 };
 
+&rpc {
+	pinctrl-0 = <&qspi0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash@0 {
+		compatible = "spansion,s25fs512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bootparam@0 {
+				reg = <0x00000000 0x040000>;
+				read-only;
+			};
+			cr7@40000 {
+				reg = <0x00040000 0x080000>;
+				read-only;
+			};
+			cert_header_sa3@c0000 {
+				reg = <0x000c0000 0x080000>;
+				read-only;
+			};
+			bl2@140000 {
+				reg = <0x00140000 0x040000>;
+				read-only;
+			};
+			cert_header_sa6@180000 {
+				reg = <0x00180000 0x040000>;
+				read-only;
+			};
+			bl31@1c0000 {
+				reg = <0x001c0000 0x460000>;
+				read-only;
+			};
+			uboot@640000 {
+				reg = <0x00640000 0x0c0000>;
+				read-only;
+			};
+			uboot-env@700000 {
+				reg = <0x00700000 0x040000>;
+				read-only;
+			};
+			dtb@740000 {
+				reg = <0x00740000 0x080000>;
+			};
+			kernel@7c0000 {
+				reg = <0x007c0000 0x1400000>;
+			};
+			user@1bc0000 {
+				reg = <0x01bc0000 0x2440000>;
+			};
+		};
+	};
+};
+
 &rwdt {
 	timeout-sec = <60>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
index 6dff04693223..7838dcee3136 100644
--- a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
@@ -187,6 +187,11 @@
 		function = "i2c0";
 	};
 
+	qspi0_pins: qspi0 {
+		groups = "qspi0_ctrl", "qspi0_data4";
+		function = "qspi0";
+	};
+
 	scif0_pins: scif0 {
 		groups = "scif0_data";
 		function = "scif0";
@@ -198,6 +203,68 @@
 	};
 };
 
+&rpc {
+	pinctrl-0 = <&qspi0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash@0 {
+		compatible = "spansion,s25fs512s", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bootparam@0 {
+				reg = <0x00000000 0x040000>;
+				read-only;
+			};
+			cr7@40000 {
+				reg = <0x00040000 0x080000>;
+				read-only;
+			};
+			cert_header_sa3@c0000 {
+				reg = <0x000c0000 0x080000>;
+				read-only;
+			};
+			bl2@140000 {
+				reg = <0x00140000 0x040000>;
+				read-only;
+			};
+			cert_header_sa6@180000 {
+				reg = <0x00180000 0x040000>;
+				read-only;
+			};
+			bl31@1c0000 {
+				reg = <0x001c0000 0x460000>;
+				read-only;
+			};
+			uboot@640000 {
+				reg = <0x00640000 0x0c0000>;
+				read-only;
+			};
+			uboot-env@700000 {
+				reg = <0x00700000 0x040000>;
+				read-only;
+			};
+			dtb@740000 {
+				reg = <0x00740000 0x080000>;
+			};
+			kernel@7c0000 {
+				reg = <0x007c0000 0x1400000>;
+			};
+			user@1bc0000 {
+				reg = <0x01bc0000 0x2440000>;
+			};
+		};
+	};
+};
+
 &rwdt {
 	timeout-sec = <60>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
index 387e6d99f2f3..59f5bbd72161 100644
--- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -1344,6 +1344,23 @@
 			status = "disabled";
 		};
 
+		rpc: spi@ee200000 {
+			compatible = "renesas,r8a77980-rpc-if",
+				     "renesas,rcar-gen3-rpc-if";
+			reg = <0 0xee200000 0 0x200>,
+			      <0 0x08000000 0 0x4000000>,
+			      <0 0xee208000 0 0x100>;
+			reg-names = "regs", "dirmap", "wbuf";
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 917>;
+			clock-names = "rpc";
+			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
+			resets = <&cpg 917>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		gic: interrupt-controller@f1010000 {
 			compatible = "arm,gic-400";
 			#interrupt-cells = <3>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
index dc24cec46ae1..7402cfa8d4e4 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
@@ -715,6 +715,7 @@
 	mmc-hs400-1_8v;
 	bus-width = <8>;
 	non-removable;
+	full-pwr-cycle-in-suspend;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
index cd11f24744d4..1991bdc36792 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
@@ -1595,7 +1595,7 @@
 			status = "disabled";
 		};
 
-		sdhi0: sd@ee100000 {
+		sdhi0: mmc@ee100000 {
 			compatible = "renesas,sdhi-r8a77990",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee100000 0 0x2000>;
@@ -1608,7 +1608,7 @@
 			status = "disabled";
 		};
 
-		sdhi1: sd@ee120000 {
+		sdhi1: mmc@ee120000 {
 			compatible = "renesas,sdhi-r8a77990",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee120000 0 0x2000>;
@@ -1621,7 +1621,7 @@
 			status = "disabled";
 		};
 
-		sdhi3: sd@ee160000 {
+		sdhi3: mmc@ee160000 {
 			compatible = "renesas,sdhi-r8a77990",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee160000 0 0x2000>;
diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
index e5617ec0f49c..2c2272f5f5b5 100644
--- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
@@ -916,7 +916,7 @@
 			status = "disabled";
 		};
 
-		sdhi2: sd@ee140000 {
+		sdhi2: mmc@ee140000 {
 			compatible = "renesas,sdhi-r8a77995",
 				     "renesas,rcar-gen3-sdhi";
 			reg = <0 0xee140000 0 0x2000>;
diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
index 98bbcafc8c0d..1bf77957d2c2 100644
--- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
@@ -833,6 +833,7 @@
 	mmc-hs400-1_8v;
 	non-removable;
 	fixed-emmc-driver-type = <1>;
+	full-pwr-cycle-in-suspend;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/rockchip/px30-evb.dts b/arch/arm64/boot/dts/rockchip/px30-evb.dts
index 0a680257d9c2..5fe905fae9a8 100644
--- a/arch/arm64/boot/dts/rockchip/px30-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/px30-evb.dts
@@ -145,7 +145,6 @@
 };
 
 &emmc {
-	bus-width = <8>;
 	cap-mmc-highspeed;
 	mmc-hs200-1_8v;
 	non-removable;
@@ -499,7 +498,6 @@
 };
 
 &sdmmc {
-	bus-width = <4>;
 	cap-mmc-highspeed;
 	cap-sd-highspeed;
 	card-detect-delay = <800>;
@@ -513,7 +511,6 @@
 };
 
 &sdio {
-	bus-width = <4>;
 	cap-sd-highspeed;
 	keep-power-in-suspend;
 	non-removable;
diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi
index a6b8427156d5..2695ea8cda14 100644
--- a/arch/arm64/boot/dts/rockchip/px30.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30.dtsi
@@ -714,6 +714,7 @@
 			reg = <0x0 0xff240000 0x0 0x4000>;
 			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			arm,pl330-periph-burst;
 			clocks = <&cru ACLK_DMAC>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
@@ -733,9 +734,9 @@
 		rockchip,grf = <&grf>;
 		rockchip,hw-tshut-temp = <120000>;
 		pinctrl-names = "init", "default", "sleep";
-		pinctrl-0 = <&tsadc_otp_gpio>;
+		pinctrl-0 = <&tsadc_otp_pin>;
 		pinctrl-1 = <&tsadc_otp_out>;
-		pinctrl-2 = <&tsadc_otp_gpio>;
+		pinctrl-2 = <&tsadc_otp_pin>;
 		#thermal-sensor-cells = <1>;
 		status = "disabled";
 	};
@@ -1373,7 +1374,7 @@
 		};
 
 		tsadc {
-			tsadc_otp_gpio: tsadc-otp-gpio {
+			tsadc_otp_pin: tsadc-otp-pin {
 				rockchip,pins =
 					<0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
 			};
diff --git a/arch/arm64/boot/dts/rockchip/rk3308.dtsi b/arch/arm64/boot/dts/rockchip/rk3308.dtsi
index ac7f694079d0..e8b754d415d8 100644
--- a/arch/arm64/boot/dts/rockchip/rk3308.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3308.dtsi
@@ -524,6 +524,7 @@
 			reg = <0x0 0xff2c0000 0x0 0x4000>;
 			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			arm,pl330-periph-burst;
 			clocks = <&cru ACLK_DMAC0>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
@@ -534,6 +535,7 @@
 			reg = <0x0 0xff2d0000 0x0 0x4000>;
 			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			arm,pl330-periph-burst;
 			clocks = <&cru ACLK_DMAC1>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
@@ -1629,7 +1631,7 @@
 		};
 
 		tsadc {
-			tsadc_otp_gpio: tsadc-otp-gpio {
+			tsadc_otp_pin: tsadc-otp-pin {
 				rockchip,pins =
 					<0 RK_PB2 0 &pcfg_pull_none>;
 			};
@@ -1657,7 +1659,7 @@
 					<2 RK_PA3 1 &pcfg_pull_none>;
 			};
 
-			uart0_rts_gpio: uart0-rts-gpio {
+			uart0_rts_pin: uart0-rts-pin {
 				rockchip,pins =
 					<2 RK_PA3 0 &pcfg_pull_none>;
 			};
@@ -1730,7 +1732,7 @@
 					<4 RK_PA7 1 &pcfg_pull_none>;
 			};
 
-			uart4_rts_gpio: uart4-rts-gpio {
+			uart4_rts_pin: uart4-rts-pin {
 				rockchip,pins =
 					<4 RK_PA7 0 &pcfg_pull_none>;
 			};
diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
index b3a8f936578f..35bd6b904b9c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
@@ -445,7 +445,6 @@
 };
 
 &sdmmc {
-	bus-width = <4>;
 	cap-sd-highspeed;
 	card-detect-delay = <200>;
 	cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>; /*[> CD GPIO <]*/
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
index ac29c2744d08..1969dab84138 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts
@@ -41,7 +41,7 @@
 		compatible = "regulator-fixed";
 		gpio = <&gpio0 30 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&sdmmc0m1_gpio>;
+		pinctrl-0 = <&sdmmc0m1_pin>;
 		regulator-name = "vcc_sd";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
index 34db48c274e5..b70ffb1c6a63 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
@@ -34,7 +34,7 @@
 		compatible = "regulator-fixed";
 		gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&sdmmc0m1_gpio>;
+		pinctrl-0 = <&sdmmc0m1_pin>;
 		regulator-boot-on;
 		regulator-name = "vcc_sd";
 		regulator-min-microvolt = <3300000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
index 6e09c223ed57..86cfb5c50a94 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
@@ -25,7 +25,7 @@
 		compatible = "regulator-fixed";
 		gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&sdmmc0m1_gpio>;
+		pinctrl-0 = <&sdmmc0m1_pin>;
 		regulator-name = "vcc_sd";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index d399883d4b75..bbdb19a3e85d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -153,6 +153,7 @@
 			reg = <0x0 0xff1f0000 0x0 0x4000>;
 			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			arm,pl330-periph-burst;
 			clocks = <&cru ACLK_DMAC>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
@@ -552,9 +553,9 @@
 		clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
 		clock-names = "tsadc", "apb_pclk";
 		pinctrl-names = "init", "default", "sleep";
-		pinctrl-0 = <&otp_gpio>;
+		pinctrl-0 = <&otp_pin>;
 		pinctrl-1 = <&otp_out>;
-		pinctrl-2 = <&otp_gpio>;
+		pinctrl-2 = <&otp_pin>;
 		resets = <&cru SRST_TSADC>;
 		reset-names = "tsadc-apb";
 		rockchip,grf = <&grf>;
@@ -1154,7 +1155,7 @@
 				rockchip,pins = <0 RK_PA5 2 &pcfg_pull_none>,
 						<0 RK_PA6 2 &pcfg_pull_none>;
 			};
-			i2c3_gpio: i2c3-gpio {
+			i2c3_pins: i2c3-pins {
 				rockchip,pins =
 					<0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>,
 					<0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -1225,7 +1226,7 @@
 		};
 
 		tsadc {
-			otp_gpio: otp-gpio {
+			otp_pin: otp-pin {
 				rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
 			};
 
@@ -1248,7 +1249,7 @@
 				rockchip,pins = <1 RK_PB2 1 &pcfg_pull_none>;
 			};
 
-			uart0_rts_gpio: uart0-rts-gpio {
+			uart0_rts_pin: uart0-rts-pin {
 				rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
 			};
 		};
@@ -1267,7 +1268,7 @@
 				rockchip,pins = <3 RK_PA5 4 &pcfg_pull_none>;
 			};
 
-			uart1_rts_gpio: uart1-rts-gpio {
+			uart1_rts_pin: uart1-rts-pin {
 				rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
 			};
 		};
@@ -1493,7 +1494,7 @@
 				rockchip,pins = <2 RK_PA7 1 &pcfg_pull_up_4ma>;
 			};
 
-			sdmmc0m0_gpio: sdmmc0m0-gpio {
+			sdmmc0m0_pin: sdmmc0m0-pin {
 				rockchip,pins = <2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up_4ma>;
 			};
 		};
@@ -1503,7 +1504,7 @@
 				rockchip,pins = <0 RK_PD6 3 &pcfg_pull_up_4ma>;
 			};
 
-			sdmmc0m1_gpio: sdmmc0m1-gpio {
+			sdmmc0m1_pin: sdmmc0m1-pin {
 				rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up_4ma>;
 			};
 		};
@@ -1536,7 +1537,7 @@
 						<1 RK_PA3 1 &pcfg_pull_up_8ma>;
 			};
 
-			sdmmc0_gpio: sdmmc0-gpio {
+			sdmmc0_pins: sdmmc0-pins {
 				rockchip,pins =
 					<1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
 					<1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
@@ -1578,7 +1579,7 @@
 					<3 RK_PA7 3 &pcfg_pull_up_4ma>;
 			};
 
-			sdmmc0ext_gpio: sdmmc0ext-gpio {
+			sdmmc0ext_pins: sdmmc0ext-pins {
 				rockchip,pins =
 					<3 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
 					<3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
@@ -1623,7 +1624,7 @@
 						<1 RK_PC1 1 &pcfg_pull_up_8ma>;
 			};
 
-			sdmmc1_gpio: sdmmc1-gpio {
+			sdmmc1_pins: sdmmc1-pins {
 				rockchip,pins =
 					<1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
 					<1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up_4ma>,
@@ -1817,7 +1818,7 @@
 			tsadc_int: tsadc-int {
 				rockchip,pins = <2 RK_PB5 2 &pcfg_pull_none>;
 			};
-			tsadc_gpio: tsadc-gpio {
+			tsadc_pin: tsadc-pin {
 				rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
 			};
 		};
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts
index cbde279ae81d..7fcb1eacea8a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-lion-haikou.dts
@@ -25,9 +25,9 @@
 	};
 
 	leds {
-		pinctrl-0 = <&led_pins_module>, <&led_sd_haikou>;
+		pinctrl-0 = <&module_led_pins>, <&sd_card_led_pin>;
 
-		sd-card-led {
+		sd_card_led: led-3 {
 			label = "sd_card_led";
 			gpios = <&gpio0 RK_PD2 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc0";
@@ -118,14 +118,14 @@
 	};
 
 	leds {
-		led_sd_haikou: led-sd-gpio {
+		sd_card_led_pin: sd-card-led-pin {
 			rockchip,pins =
 				<0 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
 	sdmmc {
-		sdmmc_cd_gpio: sdmmc-cd-gpio {
+		sdmmc_cd_pin: sdmmc-cd-pin {
 			rockchip,pins =
 				<2 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi b/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi
index e17311e09082..24d28be4736c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi
@@ -76,16 +76,16 @@
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_module>;
+		pinctrl-0 = <&module_led_pins>;
 
-		module_led1 {
+		module_led1: led-1 {
 			label = "module_led1";
 			gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 			panic-indicator;
 		};
 
-		module_led2 {
+		module_led2: led-2 {
 			label = "module_led2";
 			gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
@@ -156,7 +156,7 @@
 	pinctrl-0 = <&rgmii_pins>;
 	snps,reset-active-low;
 	snps,reset-delays-us = <0 10000 50000>;
-	snps,reset-gpio = <&gpio3 RK_PB3 GPIO_ACTIVE_HIGH>;
+	snps,reset-gpio = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
 	tx_delay = <0x10>;
 	rx_delay = <0x10>;
 	status = "okay";
@@ -270,7 +270,7 @@
 
 &pinctrl {
 	leds {
-		led_pins_module: led-module-gpio {
+		module_led_pins: module-led-pins {
 			rockchip,pins =
 				<2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>,
 				<3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
index 1ebb0eef42da..3746f23dc3df 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
@@ -149,6 +149,7 @@
 				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
 			arm,pl330-broken-no-flushp;
+			arm,pl330-periph-burst;
 			clocks = <&cru ACLK_DMAC_PERI>;
 			clock-names = "apb_pclk";
 		};
@@ -160,6 +161,7 @@
 				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
 			arm,pl330-broken-no-flushp;
+			arm,pl330-periph-burst;
 			clocks = <&cru ACLK_DMAC_BUS>;
 			clock-names = "apb_pclk";
 		};
@@ -483,9 +485,9 @@
 		resets = <&cru SRST_TSADC>;
 		reset-names = "tsadc-apb";
 		pinctrl-names = "init", "default", "sleep";
-		pinctrl-0 = <&otp_gpio>;
+		pinctrl-0 = <&otp_pin>;
 		pinctrl-1 = <&otp_out>;
-		pinctrl-2 = <&otp_gpio>;
+		pinctrl-2 = <&otp_pin>;
 		#thermal-sensor-cells = <1>;
 		rockchip,hw-tshut-temp = <95000>;
 		status = "disabled";
@@ -1145,7 +1147,7 @@
 		};
 
 		tsadc {
-			otp_gpio: otp-gpio {
+			otp_pin: otp-pin {
 				rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
 			};
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
index 20b5599f5e78..6db18808b9c5 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
@@ -589,11 +589,11 @@
 	};
 
 	pmic {
-		vsel1_gpio: vsel1-gpio {
+		vsel1_pin: vsel1-pin {
 			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 
-		vsel2_gpio: vsel2-gpio {
+		vsel2_pin: vsel2-pin {
 			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
index 4373ed732af7..60cd1c18cd4e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi
@@ -499,7 +499,7 @@ camera: &i2c7 {
 };
 
 /* there is no external pull up, so need to set this pin pull up */
-&sdmmc_cd_gpio {
+&sdmmc_cd_pin {
 	rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>;
 };
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
index 2f3997740068..32dcaf210085 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
@@ -516,7 +516,7 @@ ap_i2c_audio: &i2c8 {
 	 * configured as SDMMC and not JTAG.
 	 */
 	pinctrl-names = "default";
-	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_cd_gpio
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_cd_pin
 		     &sdmmc_bus4>;
 
 	bus-width = <4>;
@@ -767,7 +767,7 @@ ap_i2c_audio: &i2c8 {
 		};
 
 		/* This is where we actually hook up CD; has external pull */
-		sdmmc_cd_gpio: sdmmc-cd-gpio {
+		sdmmc_cd_pin: sdmmc-cd-pin {
 			rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts b/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts
index bf87fa32d3b1..341d074ed996 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts
@@ -205,7 +205,7 @@
 		compatible = "silergy,syr827";
 		reg = <0x40>;
 		regulator-compatible = "fan53555-reg";
-		pinctrl-0 = <&vsel1_gpio>;
+		pinctrl-0 = <&vsel1_pin>;
 		regulator-name = "vdd_cpu_b";
 		regulator-min-microvolt = <712500>;
 		regulator-max-microvolt = <1500000>;
@@ -223,7 +223,7 @@
 		compatible = "silergy,syr828";
 		reg = <0x41>;
 		regulator-compatible = "fan53555-reg";
-		pinctrl-0 = <&vsel2_gpio>;
+		pinctrl-0 = <&vsel2_pin>;
 		regulator-name = "vdd_gpu";
 		regulator-min-microvolt = <712500>;
 		regulator-max-microvolt = <1500000>;
@@ -521,12 +521,12 @@
 				<1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 
-		vsel1_gpio: vsel1-gpio {
+		vsel1_pin: vsel1-pin {
 			rockchip,pins =
 				<1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 
-		vsel2_gpio: vsel2-gpio {
+		vsel2_pin: vsel2-pin {
 			rockchip,pins =
 				<1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
index e87a04477440..e36837c04dc7 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
@@ -141,15 +141,15 @@
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
-		pinctrl-0 = <&sys_led_gpio>, <&user_led_gpio>;
+		pinctrl-0 = <&sys_led_pin>, <&user_led_pin>;
 
-		sys-led {
+		sys_led: led-0 {
 			label = "sys_led";
 			linux,default-trigger = "heartbeat";
 			gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
 		};
 
-		user-led {
+		user_led: led-1 {
 			label = "user_led";
 			default-state = "off";
 			gpios = <&gpio4 RK_PD0 GPIO_ACTIVE_HIGH>;
@@ -586,11 +586,11 @@
 	};
 
 	leds {
-		sys_led_gpio: sys_led-gpio {
+		sys_led_pin: sys-led-pin {
 			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		user_led_gpio: user_led-gpio {
+		user_led_pin: user-led-pin {
 			rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts b/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts
index 73be38a53796..1fa80ac15464 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts
@@ -341,7 +341,7 @@
 		reg = <0x40>;
 		fcs,suspend-voltage-selector = <1>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&vsel1_gpio>;
+		pinctrl-0 = <&vsel1_pin>;
 		regulator-name = "vdd_cpu_b";
 		regulator-min-microvolt = <712500>;
 		regulator-max-microvolt = <1500000>;
@@ -360,7 +360,7 @@
 		reg = <0x41>;
 		fcs,suspend-voltage-selector = <1>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&vsel2_gpio>;
+		pinctrl-0 = <&vsel2_pin>;
 		regulator-name = "vdd_gpu";
 		regulator-min-microvolt = <712500>;
 		regulator-max-microvolt = <1500000>;
@@ -447,11 +447,11 @@
 			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 
-		vsel1_gpio: vsel1-gpio {
+		vsel1_pin: vsel1-pin {
 			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 
-		vsel2_gpio: vsel2-gpio {
+		vsel2_pin: vsel2-pin {
 			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
index 1d246c2caa3c..76a8b40a93c6 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi4.dtsi
@@ -117,9 +117,9 @@
 	leds: gpio-leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
-		pinctrl-0 = <&leds_gpio>;
+		pinctrl-0 = <&status_led_pin>;
 
-		status {
+		status_led: led-0 {
 			gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
 			label = "status_led";
 			linux,default-trigger = "heartbeat";
@@ -520,7 +520,7 @@
 	};
 
 	gpio-leds {
-		leds_gpio: leds-gpio {
+		status_led_pin: status-led-pin {
 			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
index cb0245d2226d..06d48338c836 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
@@ -28,12 +28,19 @@
 		pwms = <&pwm0 0 740740 0>;
 	};
 
+	bat: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <9800000>;
+		voltage-max-design-microvolt = <4350000>;
+		voltage-min-design-microvolt = <3000000>;
+	};
+
 	edp_panel: edp-panel {
 		compatible = "boe,nv140fhmn49";
 		backlight = <&backlight>;
 		enable-gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&panel_en_gpio>;
+		pinctrl-0 = <&panel_en_pin>;
 		power-supply = <&vcc3v3_panel>;
 
 		ports {
@@ -60,7 +67,7 @@
 	gpio-key-lid {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
-		pinctrl-0 = <&lidbtn_gpio>;
+		pinctrl-0 = <&lidbtn_pin>;
 
 		lid {
 			debounce-interval = <20>;
@@ -76,7 +83,7 @@
 	gpio-key-power {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
-		pinctrl-0 = <&pwrbtn_gpio>;
+		pinctrl-0 = <&pwrbtn_pin>;
 
 		power {
 			debounce-interval = <20>;
@@ -117,7 +124,7 @@
 		clocks = <&rk808 1>;
 		clock-names = "ext_clock";
 		pinctrl-names = "default";
-		pinctrl-0 = <&wifi_enable_h_gpio>;
+		pinctrl-0 = <&wifi_enable_h_pin>;
 		post-power-on-delay-ms = <100>;
 		power-off-delay-us = <500000>;
 
@@ -129,7 +136,7 @@
 	es8316-sound {
 		compatible = "simple-audio-card";
 		pinctrl-names = "default";
-		pinctrl-0 = <&hp_det_gpio>;
+		pinctrl-0 = <&hp_det_pin>;
 		simple-audio-card,name = "rockchip,es8316-codec";
 		simple-audio-card,format = "i2s";
 		simple-audio-card,mclk-fs = <256>;
@@ -213,7 +220,7 @@
 		enable-active-high;
 		gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&pwr_5v_gpio>;
+		pinctrl-0 = <&pwr_5v_pin>;
 		regulator-name = "vcc5v0_usb";
 		regulator-always-on;
 		regulator-min-microvolt = <5000000>;
@@ -270,7 +277,7 @@
 		enable-active-high;
 		gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&sdmmc0_pwr_h_gpio>;
+		pinctrl-0 = <&sdmmc0_pwr_h_pin>;
 		regulator-name = "vcc3v0_sd";
 		regulator-always-on;
 		regulator-min-microvolt = <3000000>;
@@ -288,7 +295,7 @@
 		enable-active-high;
 		gpio = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&lcdvcc_en_gpio>;
+		pinctrl-0 = <&lcdvcc_en_pin>;
 		regulator-name = "vcc3v3_panel";
 		regulator-always-on;
 		regulator-min-microvolt = <3300000>;
@@ -317,7 +324,7 @@
 		enable-active-high;
 		gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&vcc5v0_host_en_gpio>;
+		pinctrl-0 = <&vcc5v0_host_en_pin>;
 		regulator-name = "vcc5v0_otg";
 		regulator-always-on;
 		regulator-min-microvolt = <5000000>;
@@ -336,7 +343,7 @@
 		enable-active-high;
 		gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&vcc5v0_typec0_en_gpio>;
+		pinctrl-0 = <&vcc5v0_typec0_en_pin>;
 		regulator-name = "vbus_5vout";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
@@ -368,7 +375,7 @@
 
 		/* Also triggered by USB charger */
 		pinctrl-names = "default";
-		pinctrl-0 = <&dc_det_gpio>;
+		pinctrl-0 = <&dc_det_pin>;
 	};
 };
 
@@ -447,7 +454,7 @@
 		interrupt-parent = <&gpio3>;
 		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_int_l_gpio>;
+		pinctrl-0 = <&pmic_int_l_pin>;
 		rockchip,system-power-controller;
 		wakeup-source;
 
@@ -627,7 +634,7 @@
 		reg = <0x40>;
 		fcs,suspend-voltage-selector = <1>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&vsel1_gpio>;
+		pinctrl-0 = <&vsel1_pin>;
 		regulator-name = "vdd_cpu_b";
 		regulator-always-on;
 		regulator-boot-on;
@@ -646,7 +653,7 @@
 		reg = <0x41>;
 		fcs,suspend-voltage-selector = <1>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&vsel2_gpio>;
+		pinctrl-0 = <&vsel2_pin>;
 		regulator-name = "vdd_gpu";
 		regulator-always-on;
 		regulator-boot-on;
@@ -693,7 +700,7 @@
 		interrupt-parent = <&gpio1>;
 		interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&fusb0_int_gpio>;
+		pinctrl-0 = <&fusb0_int_pin>;
 		vbus-supply = <&vbus_typec>;
 
 		connector {
@@ -741,11 +748,29 @@
 			};
 		};
 	};
+
+	cw2015@62 {
+		compatible = "cellwise,cw2015";
+		reg = <0x62>;
+		cellwise,battery-profile = /bits/ 8 <
+			0x17 0x67 0x80 0x73 0x6E 0x6C 0x6B 0x63
+			0x77 0x51 0x5C 0x58 0x50 0x4C 0x48 0x36
+			0x15 0x0C 0x0C 0x19 0x5B 0x7D 0x6F 0x69
+			0x69 0x5B 0x0C 0x29 0x20 0x40 0x52 0x59
+			0x57 0x56 0x54 0x4F 0x3B 0x1F 0x7F 0x17
+			0x06 0x1A 0x30 0x5A 0x85 0x93 0x96 0x2D
+			0x48 0x77 0x9C 0xB3 0x80 0x52 0x94 0xCB
+			0x2F 0x00 0x64 0xA5 0xB5 0x11 0xF0 0x11
+		>;
+		cellwise,monitor-interval-ms = <5000>;
+		monitored-battery = <&bat>;
+		power-supplies = <&mains_charger>, <&fusb0>;
+	};
 };
 
 &i2s1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&i2s_8ch_mclk_gpio>, <&i2s1_2ch_bus>;
+	pinctrl-0 = <&i2s_8ch_mclk_pin>, <&i2s1_2ch_bus>;
 	rockchip,capture-channels = <8>;
 	rockchip,playback-channels = <8>;
 	status = "okay";
@@ -777,49 +802,49 @@
 
 &pinctrl {
 	buttons {
-		pwrbtn_gpio: pwrbtn-gpio {
+		pwrbtn_pin: pwrbtn-pin {
 			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 
-		lidbtn_gpio: lidbtn-gpio {
+		lidbtn_pin: lidbtn-pin {
 			rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
 	dc-charger {
-		dc_det_gpio: dc-det-gpio {
+		dc_det_pin: dc-det-pin {
 			rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
 	es8316 {
-		hp_det_gpio: hp-det-gpio {
+		hp_det_pin: hp-det-pin {
 			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
 	fusb302x {
-		fusb0_int_gpio: fusb0-int-gpio {
+		fusb0_int_pin: fusb0-int-pin {
 			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
 	i2s1 {
-		i2s_8ch_mclk_gpio: i2s-8ch-mclk-gpio {
+		i2s_8ch_mclk_pin: i2s-8ch-mclk-pin {
 			rockchip,pins = <4 RK_PA0 1 &pcfg_pull_none>;
 		};
 	};
 
 	lcd-panel {
-		lcdvcc_en_gpio: lcdvcc-en-gpio {
+		lcdvcc_en_pin: lcdvcc-en-pin {
 			rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		panel_en_gpio: panel-en-gpio {
+		panel_en_pin: panel-en-pin {
 			rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		lcd_panel_reset_gpio: lcd-panel-reset-gpio {
+		lcd_panel_reset_pin: lcd-panel-reset-pin {
 			rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
@@ -835,58 +860,58 @@
 	};
 
 	pmic {
-		pmic_int_l_gpio: pmic-int-l-gpio {
+		pmic_int_l_pin: pmic-int-l-pin {
 			rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 
-		vsel1_gpio: vsel1-gpio {
+		vsel1_pin: vsel1-pin {
 			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 
-		vsel2_gpio: vsel2-gpio {
+		vsel2_pin: vsel2-pin {
 			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 	};
 
 	sdcard {
-		sdmmc0_pwr_h_gpio: sdmmc0-pwr-h-gpio {
+		sdmmc0_pwr_h_pin: sdmmc0-pwr-h-pin {
 			rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
 	};
 
 	sdio-pwrseq {
-		wifi_enable_h_gpio: wifi-enable-h-gpio {
+		wifi_enable_h_pin: wifi-enable-h-pin {
 			rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
 	usb-typec {
-		vcc5v0_typec0_en_gpio: vcc5v0-typec0-en-gpio {
+		vcc5v0_typec0_en_pin: vcc5v0-typec0-en-pin {
 			rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
 	usb2 {
-		pwr_5v_gpio: pwr-5v-gpio {
+		pwr_5v_pin: pwr-5v-pin {
 			rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		vcc5v0_host_en_gpio: vcc5v0-host-en-gpio {
+		vcc5v0_host_en_pin: vcc5v0-host-en-pin {
 			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
 	wireless-bluetooth {
-		bt_wake_gpio: bt-wake-gpio {
+		bt_wake_pin: bt-wake-pin {
 			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		bt_host_wake_gpio: bt-host-wake-gpio {
+		bt_host_wake_pin: bt-host-wake-pin {
 			rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		bt_reset_gpio: bt-reset-gpio {
+		bt_reset_pin: bt-reset-pin {
 			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
@@ -1034,7 +1059,7 @@
 		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
 		max-speed = <1500000>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&bt_host_wake_gpio &bt_wake_gpio &bt_reset_gpio>;
+		pinctrl-0 = <&bt_host_wake_pin &bt_wake_pin &bt_reset_pin>;
 		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
 		vbat-supply = <&wifi_bat>;
 		vddio-supply = <&vcc_wl>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
index d80d6b726820..a8d363568fd6 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
@@ -15,9 +15,9 @@
 	};
 
 	leds {
-		pinctrl-0 = <&led_pin_module>, <&led_sd_haikou>;
+		pinctrl-0 = <&module_led_pin>, <&sd_card_led_pin>;
 
-		sd-card-led {
+		sd_card_led: led-1 {
 			label = "sd_card_led";
 			gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc0";
@@ -179,7 +179,7 @@
 	};
 
 	leds {
-		led_sd_haikou: led-sd-gpio {
+		sd_card_led_pin: sd-card-led-pin {
 			rockchip,pins =
 			  <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
index 07694b196fdb..4660416c8f38 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
@@ -11,9 +11,9 @@
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
-		pinctrl-0 = <&led_pin_module>;
+		pinctrl-0 = <&module_led_pin>;
 
-		module-led {
+		module_led: led-0 {
 			label = "module_led";
 			gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
@@ -101,7 +101,7 @@
 
 	vcc5v0_host: vcc5v0-host-regulator {
 		compatible = "regulator-fixed";
-		gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
+		gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>;
 		enable-active-low;
 		pinctrl-names = "default";
 		pinctrl-0 = <&vcc5v0_host_en>;
@@ -157,7 +157,7 @@
 	phy-mode = "rgmii";
 	pinctrl-names = "default";
 	pinctrl-0 = <&rgmii_pins>;
-	snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
+	snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
 	snps,reset-active-low;
 	snps,reset-delays-us = <0 10000 50000>;
 	tx_delay = <0x10>;
@@ -450,7 +450,7 @@
 	};
 
 	leds {
-		led_pin_module: led-module-gpio {
+		module_led_pin: module-led-pin {
 			rockchip,pins =
 			  <2 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
index 9f225e9c3d54..b85ec31cd283 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
@@ -61,23 +61,23 @@
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
-		pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>, <&yellow_led_gpio>;
+		pinctrl-0 = <&work_led_pin>, <&diy_led_pin>, <&yellow_led_pin>;
 
-		work-led {
+		work_led: led-0 {
 			label = "green:work";
 			gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		diy-led {
+		diy_led: led-1 {
 			label = "red:diy";
 			gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 			linux,default-trigger = "mmc1";
 		};
 
-		yellow-led {
+		yellow_led: led-2 {
 			label = "yellow:yellow-led";
 			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
@@ -456,7 +456,7 @@
 		reg = <0x40>;
 		fcs,suspend-voltage-selector = <1>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&vsel1_gpio>;
+		pinctrl-0 = <&vsel1_pin>;
 		regulator-name = "vdd_cpu_b";
 		regulator-min-microvolt = <712500>;
 		regulator-max-microvolt = <1500000>;
@@ -475,7 +475,7 @@
 		reg = <0x41>;
 		fcs,suspend-voltage-selector = <1>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&vsel2_gpio>;
+		pinctrl-0 = <&vsel2_pin>;
 		regulator-name = "vdd_gpu";
 		regulator-min-microvolt = <712500>;
 		regulator-max-microvolt = <1500000>;
@@ -595,25 +595,25 @@
 	};
 
 	leds {
-		diy_led_gpio: diy_led-gpio {
+		diy_led_pin: diy-led-pin {
 			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		work_led_gpio: work_led-gpio {
+		work_led_pin: work-led-pin {
 			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		yellow_led_gpio: yellow_led-gpio {
+		yellow_led_pin: yellow-led-pin {
 			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
 	pmic {
-		vsel1_gpio: vsel1-gpio {
+		vsel1_pin: vsel1-pin {
 			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 
-		vsel2_gpio: vsel2-gpio {
+		vsel2_pin: vsel2-pin {
 			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts
index 3923ec01ef66..60f98a3e19d8 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dts
@@ -390,7 +390,7 @@
 		reg = <0x40>;
 		fcs,suspend-voltage-selector = <1>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&vsel1_gpio>;
+		pinctrl-0 = <&vsel1_pin>;
 		regulator-name = "vdd_cpu_b";
 		regulator-min-microvolt = <712500>;
 		regulator-max-microvolt = <1500000>;
@@ -409,7 +409,7 @@
 		reg = <0x41>;
 		fcs,suspend-voltage-selector = <1>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&vsel2_gpio>;
+		pinctrl-0 = <&vsel2_pin>;
 		regulator-name = "vdd_gpu";
 		regulator-min-microvolt = <712500>;
 		regulator-max-microvolt = <1500000>;
@@ -532,11 +532,11 @@
 			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 
-		vsel1_gpio: vsel1-gpio {
+		vsel1_pin: vsel1-pin {
 			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 
-		vsel2_gpio: vsel2-gpio {
+		vsel2_pin: vsel2-pin {
 			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi
index ba7c75c9f2a1..5e3ac589bc54 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi
@@ -470,12 +470,12 @@
 				<1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 
-		vsel1_gpio: vsel1-gpio {
+		vsel1_pin: vsel1-pin {
 			rockchip,pins =
 				<1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 
-		vsel2_gpio: vsel2-gpio {
+		vsel2_pin: vsel2-pin {
 			rockchip,pins =
 				<1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
index 6788ab28f89a..6e553ff47534 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
@@ -39,15 +39,15 @@
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
-		pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>;
+		pinctrl-0 = <&work_led_pin>, <&diy_led_pin>;
 
-		work-led {
+		work_led: led-0 {
 			label = "work";
 			default-state = "on";
 			gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
 		};
 
-		diy-led {
+		diy_led: led-1 {
 			label = "diy";
 			default-state = "off";
 			gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
@@ -445,7 +445,7 @@
 		reg = <0x40>;
 		fcs,suspend-voltage-selector = <1>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&vsel1_gpio>;
+		pinctrl-0 = <&vsel1_pin>;
 		regulator-name = "vdd_cpu_b";
 		regulator-min-microvolt = <712500>;
 		regulator-max-microvolt = <1500000>;
@@ -464,7 +464,7 @@
 		reg = <0x41>;
 		fcs,suspend-voltage-selector = <1>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&vsel2_gpio>;
+		pinctrl-0 = <&vsel2_pin>;
 		regulator-name = "vdd_gpu";
 		regulator-min-microvolt = <712500>;
 		regulator-max-microvolt = <1500000>;
@@ -588,11 +588,11 @@
 	};
 
 	leds {
-		work_led_gpio: work_led-gpio {
+		work_led_pin: work-led-pin {
 			rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		diy_led_gpio: diy_led-gpio {
+		diy_led_pin: diy-led-pin {
 			rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
@@ -612,11 +612,11 @@
 			rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 
-		vsel1_gpio: vsel1-gpio {
+		vsel1_pin: vsel1-pin {
 			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 
-		vsel2_gpio: vsel2-gpio {
+		vsel2_pin: vsel2-pin {
 			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 	};
@@ -795,7 +795,7 @@
 
 &usbdrd_dwc3_0 {
 	status = "okay";
-	dr_mode = "otg";
+	dr_mode = "host";
 };
 
 &usbdrd3_1 {
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
index 1bc1579674e5..701a567d7638 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
@@ -481,11 +481,11 @@
 				<1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 
-		vsel1_gpio: vsel1-gpio {
+		vsel1_pin: vsel1-pin {
 			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 
-		vsel2_gpio: vsel2-gpio {
+		vsel2_pin: vsel2-pin {
 			rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 2581e9cc7a1d..ada724b12f01 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -209,6 +209,7 @@
 			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH 0>,
 				     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>;
 			#dma-cells = <1>;
+			arm,pl330-periph-burst;
 			clocks = <&cru ACLK_DMAC0_PERILP>;
 			clock-names = "apb_pclk";
 		};
@@ -219,6 +220,7 @@
 			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH 0>,
 				     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>;
 			#dma-cells = <1>;
+			arm,pl330-periph-burst;
 			clocks = <&cru ACLK_DMAC1_PERILP>;
 			clock-names = "apb_pclk";
 		};
@@ -845,9 +847,9 @@
 		rockchip,grf = <&grf>;
 		rockchip,hw-tshut-temp = <95000>;
 		pinctrl-names = "init", "default", "sleep";
-		pinctrl-0 = <&otp_gpio>;
+		pinctrl-0 = <&otp_pin>;
 		pinctrl-1 = <&otp_out>;
-		pinctrl-2 = <&otp_gpio>;
+		pinctrl-2 = <&otp_pin>;
 		#thermal-sensor-cells = <1>;
 		status = "disabled";
 	};
@@ -1397,6 +1399,17 @@
 			status = "disabled";
 		};
 
+		mipi_dphy_rx0: mipi-dphy-rx0 {
+			compatible = "rockchip,rk3399-mipi-dphy-rx0";
+			clocks = <&cru SCLK_MIPIDPHY_REF>,
+				 <&cru SCLK_DPHY_RX0_CFG>,
+				 <&cru PCLK_VIO_GRF>;
+			clock-names = "dphy-ref", "dphy-cfg", "grf";
+			power-domains = <&power RK3399_PD_VIO>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
 		u2phy0: usb2-phy@e450 {
 			compatible = "rockchip,rk3399-usb2phy";
 			reg = <0xe450 0x10>;
@@ -2485,7 +2498,7 @@
 		};
 
 		tsadc {
-			otp_gpio: otp-gpio {
+			otp_pin: otp-pin {
 				rockchip,pins = <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
 			};
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts b/arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts
index a1783e7f769a..369de5dc0ebd 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399pro-rock-pi-n10.dts
@@ -8,11 +8,15 @@
 /dts-v1/;
 #include "rk3399.dtsi"
 #include "rk3399-opp.dtsi"
-#include "rk3399pro-vmarc-som.dtsi"
 #include <arm/rockchip-radxa-dalang-carrier.dtsi>
+#include "rk3399pro-vmarc-som.dtsi"
 
 / {
 	model = "Radxa ROCK Pi N10";
 	compatible = "radxa,rockpi-n10", "vamrs,rk3399pro-vmarc-som",
 		     "rockchip,rk3399pro";
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
 };
diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
index 0a516334f15f..5d087be04af8 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
@@ -12,30 +12,16 @@
 / {
 	compatible = "vamrs,rk3399pro-vmarc-som", "rockchip,rk3399pro";
 
-	clkin_gmac: external-gmac-clock {
-		compatible = "fixed-clock";
-		clock-frequency = <125000000>;
-		clock-output-names = "clkin_gmac";
-		#clock-cells = <0>;
-	};
-
-	vcc12v_dcin: vcc12v-dcin-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc12v_dcin";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <12000000>;
-		regulator-max-microvolt = <12000000>;
-	};
-
-	vcc5v0_sys: vcc5v0-sys-regulator {
+	vcc3v3_pcie: vcc-pcie-regulator {
 		compatible = "regulator-fixed";
-		regulator-name = "vcc5v0_sys";
+		enable-active-high;
+		gpio = <&gpio4 RK_PD4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie_pwr>;
+		regulator-name = "vcc3v3_pcie";
 		regulator-always-on;
 		regulator-boot-on;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&vcc12v_dcin>;
+		vin-supply = <&vcc5v0_sys>;
 	};
 };
 
@@ -61,23 +47,20 @@
 
 &gmac {
 	assigned-clocks = <&cru SCLK_RMII_SRC>;
-	assigned-clock-parents = <&clkin_gmac>;
-	clock_in_out = "input";
 	phy-supply = <&vcc_lan>;
-	phy-mode = "rgmii";
-	pinctrl-names = "default";
-	pinctrl-0 = <&rgmii_pins>;
 	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
-	snps,reset-active-low;
-	snps,reset-delays-us = <0 10000 50000>;
-	tx_delay = <0x28>;
-	rx_delay = <0x11>;
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_cec>;
 };
 
 &i2c0 {
 	clock-frequency = <400000>;
-	i2c-scl-rising-time-ns = <180>;
 	i2c-scl-falling-time-ns = <30>;
+	i2c-scl-rising-time-ns = <180>;
 	status = "okay";
 
 	rk809: pmic@20 {
@@ -171,7 +154,8 @@
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <900000>;
 				regulator-state-mem {
-					regulator-off-in-suspend;
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
 				};
 			};
 
@@ -206,7 +190,8 @@
 				regulator-min-microvolt = <1850000>;
 				regulator-max-microvolt = <1850000>;
 				regulator-state-mem {
-					regulator-off-in-suspend;
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1850000>;
 				};
 			};
 
@@ -297,11 +282,88 @@
 	};
 };
 
+&i2c1 {
+	i2c-scl-falling-time-ns = <30>;
+	i2c-scl-rising-time-ns = <140>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	hym8563: hym8563@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "hym8563";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <RK_PD6 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c3 {
+	i2c-scl-rising-time-ns = <450>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
 &io_domains {
 	status = "okay";
 	bt656-supply = <&vcca_1v8>;
-	sdmmc-supply = <&vccio_sd>;
 	gpio1830-supply = <&vccio_3v0>;
+	sdmmc-supply = <&vccio_sd>;
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pcie0 {
+	ep-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
+	max-link-speed = <2>;
+	num-lanes = <4>;
+	pinctrl-0 = <&pcie_clkreqnb_cpm>;
+	pinctrl-names = "default";
+	vpcie0v9-supply = <&vcca_0v9>;	/* VCC_0V9_S0 */
+	vpcie1v8-supply = <&vcca_1v8>;	/* VCC_1V8_S0 */
+	vpcie3v3-supply = <&vcc3v3_pcie>;
+	status = "okay";
+};
+
+&pinctrl {
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <4 RK_PD6 0 &pcfg_pull_up>;
+		};
+	};
+
+	pcie {
+		pcie_pwr: pcie-pwr {
+			rockchip,pins =	<4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <1 RK_PC2 0 &pcfg_pull_up>;
+		};
+	};
+
+	vbus_host {
+		usb1_en_oc: usb1-en-oc {
+			rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	vbus_typec {
+		usb0_en_oc: usb0-en-oc {
+			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
 };
 
 &pmu_io_domains {
@@ -317,17 +379,79 @@
 	status = "okay";
 };
 
-&tsadc {
+&sdmmc {
+	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+	max-frequency = <150000000>;
+};
+
+&tcphy0 {
 	status = "okay";
+};
+
+&tsadc {
 	rockchip,hw-tshut-mode = <1>;
 	rockchip,hw-tshut-polarity = <1>;
+	status = "okay";
 };
 
-&pinctrl {
-	pmic {
-		pmic_int_l: pmic-int-l {
-			rockchip,pins =
-				<1 RK_PC2 0 &pcfg_pull_up>;
-		};
+&u2phy0 {
+	status = "okay";
+
+	u2phy0_otg: otg-port {
+		phy-supply = <&vbus_typec>;
+		status = "okay";
+	};
+
+	u2phy0_host: host-port {
+		phy-supply = <&vbus_host>;
+		status = "okay";
+	};
+};
+
+
+&u2phy1 {
+	status = "okay";
+
+	u2phy1_host: host-port {
+		phy-supply = <&vbus_host>;
+		status = "okay";
 	};
 };
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	status = "okay";
+};
+
+&vbus_host {
+	enable-active-high;
+	gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>; /* USB1_EN_OC# */
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_en_oc>;
+};
+
+&vbus_typec {
+	enable-active-high;
+	gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; /* USB0_EN_OC# */
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_en_oc>;
+};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts
index 816ac25fa1eb..da44a15a8adf 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts
@@ -157,7 +157,7 @@
 };
 
 &mdio {
-	ethphy: ethphy@1 {
+	ethphy: ethernet-phy@1 {
 		reg = <1>;
 	};
 };
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts
index 693171f82ff1..617d2b1e9b1e 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts
@@ -20,7 +20,7 @@
 
 	aliases {
 		serial0 = &serial0;
-		serial1 = &serial1;
+		serial1 = &serialsc;
 		serial2 = &serial2;
 		serial3 = &serial3;
 		i2c0 = &i2c0;
@@ -42,6 +42,10 @@
 	interrupts = <0 8>;
 };
 
+&serialsc {
+	interrupts = <0 8>;
+};
+
 &serial0 {
 	status = "okay";
 };
@@ -76,7 +80,7 @@
 };
 
 &mdio {
-	ethphy: ethphy@1 {
+	ethphy: ethernet-phy@1 {
 		reg = <1>;
 	};
 };
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-akebi96.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-akebi96.dts
index 816919b42d2e..aa159a11292c 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20-akebi96.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-akebi96.dts
@@ -153,7 +153,7 @@
 };
 
 &mdio {
-	ethphy: ethphy@0 {
+	ethphy: ethernet-phy@0 {
 		reg = <0>;
 	};
 };
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts
index 2c000082667c..a01579cb3b79 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts
@@ -141,7 +141,7 @@
 };
 
 &mdio {
-	ethphy: ethphy@1 {
+	ethphy: ethernet-phy@1 {
 		reg = <1>;
 	};
 };
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts
index eeb976e7892d..39ee279a1eb9 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts
@@ -20,7 +20,7 @@
 
 	aliases {
 		serial0 = &serial0;
-		serial1 = &serial1;
+		serial1 = &serialsc;
 		serial2 = &serial2;
 		serial3 = &serial3;
 		i2c0 = &i2c0;
@@ -42,6 +42,10 @@
 	interrupts = <0 8>;
 };
 
+&serialsc {
+	interrupts = <0 8>;
+};
+
 &serial0 {
 	status = "okay";
 };
@@ -64,7 +68,7 @@
 };
 
 &mdio {
-	ethphy: ethphy@0 {
+	ethphy: ethernet-phy@0 {
 		reg = <0>;
 	};
 };
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
index f4a56b208837..a87b8a678719 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
@@ -936,7 +936,9 @@
 			compatible = "socionext,uniphier-ld20-pcie-phy";
 			reg = <0x66038000 0x4000>;
 			#phy-cells = <0>;
+			clock-names = "link";
 			clocks = <&sys_clk 24>;
+			reset-names = "link";
 			resets = <&sys_rst 24>;
 			socionext,syscon = <&soc_glue>;
 		};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts
index 7c30c6b56b57..086040306fb3 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts
@@ -19,7 +19,7 @@
 
 	aliases {
 		serial0 = &serial0;
-		serial1 = &serial1;
+		serial1 = &serialsc;
 		serial2 = &serial2;
 		serial3 = &serial3;
 		i2c0 = &i2c0;
@@ -43,6 +43,10 @@
 	interrupts = <4 8>;
 };
 
+&serialsc {
+	interrupts = <4 8>;
+};
+
 &spi0 {
 	status = "okay";
 };
@@ -97,7 +101,7 @@
 };
 
 &mdio0 {
-	ethphy0: ethphy@0 {
+	ethphy0: ethernet-phy@0 {
 		reg = <0>;
 	};
 };
@@ -108,7 +112,7 @@
 };
 
 &mdio1 {
-	ethphy1: ethphy@0 {
+	ethphy1: ethernet-phy@0 {
 		reg = <0>;
 	};
 };
diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
index 72f16881cf53..0e52dadf54b3 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
@@ -833,7 +833,9 @@
 			compatible = "socionext,uniphier-pxs3-pcie-phy";
 			reg = <0x66038000 0x4000>;
 			#phy-cells = <0>;
+			clock-names = "link";
 			clocks = <&sys_clk 24>;
+			reset-names = "link";
 			resets = <&sys_rst 24>;
 			socionext,syscon = <&soc_glue>;
 		};
diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index b397945fdf73..05c0bebf65d4 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -3,7 +3,7 @@
 # Make file to build device tree binaries for boards based on
 # Texas Instruments Inc processors
 #
-# Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/
+# Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/
 #
 
 dtb-$(CONFIG_ARCH_K3_AM6_SOC) += k3-am654-base-board.dtb
diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 61815228e230..9edfae5944f7 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -2,7 +2,7 @@
 /*
  * Device Tree Source for AM6 SoC Family Main Domain peripherals
  *
- * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/
  */
 #include <dt-bindings/phy/phy-am654-serdes.h>
 
@@ -42,7 +42,7 @@
 		 */
 		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 
-		gic_its: gic-its@1820000 {
+		gic_its: msi-controller@1820000 {
 			compatible = "arm,gic-v3-its";
 			reg = <0x00 0x01820000 0x00 0x10000>;
 			socionext,synquacer-pre-its = <0x1000000 0x400000>;
@@ -244,9 +244,43 @@
 		interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
 		mmc-ddr-1_8v;
 		mmc-hs200-1_8v;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-mmc-hs = <0x0>;
+		ti,otap-del-sel-sd-hs = <0x0>;
+		ti,otap-del-sel-sdr12 = <0x0>;
+		ti,otap-del-sel-sdr25 = <0x0>;
+		ti,otap-del-sel-sdr50 = <0x8>;
+		ti,otap-del-sel-sdr104 = <0x7>;
+		ti,otap-del-sel-ddr50 = <0x5>;
+		ti,otap-del-sel-ddr52 = <0x5>;
+		ti,otap-del-sel-hs200 = <0x5>;
+		ti,otap-del-sel-hs400 = <0x0>;
+		ti,trm-icp = <0x8>;
+		dma-coherent;
+	};
+
+	sdhci1: sdhci@4fa0000 {
+		compatible = "ti,am654-sdhci-5.1";
+		reg = <0x0 0x4fa0000 0x0 0x260>, <0x0 0x4fb0000 0x0 0x134>;
+		power-domains = <&k3_pds 48 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 48 0>, <&k3_clks 48 1>;
+		clock-names = "clk_ahb", "clk_xin";
+		interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-mmc-hs = <0x0>;
+		ti,otap-del-sel-sd-hs = <0x0>;
+		ti,otap-del-sel-sdr12 = <0x0>;
+		ti,otap-del-sel-sdr25 = <0x0>;
+		ti,otap-del-sel-sdr50 = <0x8>;
+		ti,otap-del-sel-sdr104 = <0x7>;
+		ti,otap-del-sel-ddr50 = <0x4>;
+		ti,otap-del-sel-ddr52 = <0x4>;
+		ti,otap-del-sel-hs200 = <0x7>;
+		ti,clkbuf-sel = <0x7>;
 		ti,otap-del-sel = <0x2>;
 		ti,trm-icp = <0x8>;
 		dma-coherent;
+		no-1-8-v;
 	};
 
 	scm_conf: scm_conf@100000 {
diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
index ae5f813d0cac..8c1abcfe0860 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
@@ -2,7 +2,7 @@
 /*
  * Device Tree Source for AM6 SoC Family MCU Domain peripherals
  *
- * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 &cbass_mcu {
diff --git a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
index 54a133fa1bf2..5f55b9e82cf1 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
@@ -2,7 +2,7 @@
 /*
  * Device Tree Source for AM6 SoC Family Wakeup Domain peripherals
  *
- * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 &cbass_wakeup {
@@ -34,6 +34,11 @@
 		};
 	};
 
+	chipid@43000014 {
+		compatible = "ti,am654-chipid";
+		reg = <0x43000014 0x4>;
+	};
+
 	wkup_pmx0: pinmux@4301c000 {
 		compatible = "pinctrl-single";
 		reg = <0x4301c000 0x118>;
diff --git a/arch/arm64/boot/dts/ti/k3-am65.dtsi b/arch/arm64/boot/dts/ti/k3-am65.dtsi
index 5be75e430965..27c0406b10ba 100644
--- a/arch/arm64/boot/dts/ti/k3-am65.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65.dtsi
@@ -2,7 +2,7 @@
 /*
  * Device Tree Source for AM6 SoC Family
  *
- * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 #include <dt-bindings/gpio/gpio.h>
diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index 2f3d3316a1cf..611e66207010 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /dts-v1/;
@@ -167,6 +167,19 @@
 		>;
 	};
 
+	main_mmc1_pins_default: main_mmc1_pins_default {
+		pinctrl-single,pins = <
+			AM65X_IOPAD(0x02d4, PIN_INPUT_PULLDOWN, 0) /* (C27) MMC1_CLK */
+			AM65X_IOPAD(0x02d8, PIN_INPUT_PULLUP, 0) /* (C28) MMC1_CMD */
+			AM65X_IOPAD(0x02d0, PIN_INPUT_PULLUP, 0) /* (D28) MMC1_DAT0 */
+			AM65X_IOPAD(0x02cc, PIN_INPUT_PULLUP, 0) /* (E27) MMC1_DAT1 */
+			AM65X_IOPAD(0x02c8, PIN_INPUT_PULLUP, 0) /* (D26) MMC1_DAT2 */
+			AM65X_IOPAD(0x02c4, PIN_INPUT_PULLUP, 0) /* (D27) MMC1_DAT3 */
+			AM65X_IOPAD(0x02dc, PIN_INPUT_PULLUP, 0) /* (B24) MMC1_SDCD */
+			AM65X_IOPAD(0x02e0, PIN_INPUT, 0) /* (C24) MMC1_SDWP */
+		>;
+	};
+
 	usb1_pins_default: usb1_pins_default {
 		pinctrl-single,pins = <
 			AM65X_IOPAD(0x02c0, PIN_OUTPUT, 0) /* (AC8) USB1_DRVVBUS */
@@ -300,6 +313,18 @@
 	disable-wp;
 };
 
+/*
+ * Because of erratas i2025 and i2026 for silicon revision 1.0, the
+ * SD card interface might fail. Boards with sr1.0 are recommended to
+ * disable sdhci1
+ */
+&sdhci1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mmc1_pins_default>;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
 &dwc3_1 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am654.dtsi b/arch/arm64/boot/dts/ti/k3-am654.dtsi
index b221abf43ac2..f0a6541b8042 100644
--- a/arch/arm64/boot/dts/ti/k3-am654.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am654.dtsi
@@ -2,7 +2,7 @@
 /*
  * Device Tree Source for AM6 SoC family in Quad core configuration
  *
- * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 #include "k3-am65.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
index 6df823aaa37c..8bc1e6ecc50e 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /dts-v1/;
@@ -34,6 +34,55 @@
 			gpios = <&wkup_gpio0 7 GPIO_ACTIVE_LOW>;
 		};
 	};
+
+	evm_12v0: fixedregulator-evm12v0 {
+		/* main supply */
+		compatible = "regulator-fixed";
+		regulator-name = "evm_12v0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_3v3: fixedregulator-vsys3v3 {
+		/* Output of LMS140 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&evm_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_5v0: fixedregulator-vsys5v0 {
+		/* Output of LM5140 */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&evm_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	sound0: sound@0 {
+		compatible = "ti,j721e-cpb-audio";
+		model = "j721e-cpb";
+
+		ti,cpb-mcasp = <&mcasp10>;
+		ti,cpb-codec = <&pcm3168a_1>;
+
+		clocks = <&k3_clks 184 1>,
+			 <&k3_clks 184 2>, <&k3_clks 184 4>,
+			 <&k3_clks 157 371>,
+			 <&k3_clks 157 400>, <&k3_clks 157 401>;
+		clock-names = "cpb-mcasp-auxclk",
+			      "cpb-mcasp-auxclk-48000", "cpb-mcasp-auxclk-44100",
+			      "cpb-codec-scki",
+			      "cpb-codec-scki-48000", "cpb-codec-scki-44100";
+	};
 };
 
 &main_pmx0 {
@@ -60,6 +109,7 @@
 	main_usbss0_pins_default: main_usbss0_pins_default {
 		pinctrl-single,pins = <
 			J721E_IOPAD(0x290, PIN_OUTPUT, 0) /* (U6) USB0_DRVVBUS */
+			J721E_IOPAD(0x210, PIN_INPUT, 7) /* (W3) MCAN1_RX.GPIO1_3 */
 		>;
 	};
 
@@ -103,10 +153,24 @@
 		>;
 	};
 
-	main_i2c1_exp4_pins_default: main-i2c1-exp4-pins-default {
+	mcasp10_pins_default: mcasp10_pins_default {
 		pinctrl-single,pins = <
-			J721E_IOPAD(0x230, PIN_INPUT, 7) /* (U2) ECAP0_IN_APWM_OUT.GPIO1_11 */
-		 >;
+			J721E_IOPAD(0x158, PIN_OUTPUT_PULLDOWN, 12) /* (U23) RGMII5_TX_CTL.MCASP10_ACLKX */
+			J721E_IOPAD(0x15c, PIN_OUTPUT_PULLDOWN, 12) /* (U26) RGMII5_RX_CTL.MCASP10_AFSX */
+			J721E_IOPAD(0x160, PIN_OUTPUT_PULLDOWN, 12) /* (V28) RGMII5_TD3.MCASP10_AXR0 */
+			J721E_IOPAD(0x164, PIN_OUTPUT_PULLDOWN, 12) /* (V29) RGMII5_TD2.MCASP10_AXR1 */
+			J721E_IOPAD(0x170, PIN_OUTPUT_PULLDOWN, 12) /* (U29) RGMII5_TXC.MCASP10_AXR2 */
+			J721E_IOPAD(0x174, PIN_OUTPUT_PULLDOWN, 12) /* (U25) RGMII5_RXC.MCASP10_AXR3 */
+			J721E_IOPAD(0x198, PIN_INPUT_PULLDOWN, 12) /* (V25) RGMII6_TD1.MCASP10_AXR4 */
+			J721E_IOPAD(0x19c, PIN_INPUT_PULLDOWN, 12) /* (W27) RGMII6_TD0.MCASP10_AXR5 */
+			J721E_IOPAD(0x1a0, PIN_INPUT_PULLDOWN, 12) /* (W29) RGMII6_TXC.MCASP10_AXR6 */
+		>;
+	};
+
+	audi_ext_refclk2_pins_default: audi_ext_refclk2_pins_default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0x1a4, PIN_OUTPUT, 3) /* (W26) RGMII6_RXC.AUDIO_EXT_REFCLK2 */
+		>;
 	};
 };
 
@@ -335,16 +399,44 @@
 	status = "disabled";
 };
 
+&usb_serdes_mux {
+	idle-states = <1>, <0>; /* USB0 to SERDES3, USB1 to SERDES1 */
+};
+
+&serdes_ln_ctrl {
+	idle-states = <SERDES0_LANE0_PCIE0_LANE0>, <SERDES0_LANE1_PCIE0_LANE1>,
+		      <SERDES1_LANE0_PCIE1_LANE0>, <SERDES1_LANE1_PCIE1_LANE1>,
+		      <SERDES2_LANE0_PCIE2_LANE0>, <SERDES2_LANE1_PCIE2_LANE1>,
+		      <SERDES3_LANE0_USB3_0_SWAP>, <SERDES3_LANE1_USB3_0>,
+		      <SERDES4_LANE0_EDP_LANE0>, <SERDES4_LANE1_EDP_LANE1>, <SERDES4_LANE2_EDP_LANE2>, <SERDES4_LANE3_EDP_LANE3>;
+};
+
+&serdes_wiz3 {
+	typec-dir-gpios = <&main_gpio1 3 GPIO_ACTIVE_HIGH>;
+	typec-dir-debounce-ms = <700>;	/* TUSB321, tCCB_DEFAULT 133 ms */
+};
+
+&serdes3 {
+	serdes3_usb_link: link@0 {
+		reg = <0>;
+		cdns,num-lanes = <2>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_USB3>;
+		resets = <&serdes_wiz3 1>, <&serdes_wiz3 2>;
+	};
+};
+
 &usbss0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_usbss0_pins_default>;
-	ti,usb2-only;
 	ti,vbus-divider;
 };
 
 &usb0 {
 	dr_mode = "otg";
-	maximum-speed = "high-speed";
+	maximum-speed = "super-speed";
+	phys = <&serdes3_usb_link>;
+	phy-names = "cdns3,usb3-phy";
 };
 
 &usbss1 {
@@ -407,6 +499,22 @@
 		reg = <0x22>;
 		gpio-controller;
 		#gpio-cells = <2>;
+
+		p09 {
+			/* P11 - MCASP/TRACE_MUX_S0 */
+			gpio-hog;
+			gpios = <9 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "MCASP/TRACE_MUX_S0";
+		};
+
+		p10 {
+			/* P12 - MCASP/TRACE_MUX_S1 */
+			gpio-hog;
+			gpios = <10 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "MCASP/TRACE_MUX_S1";
+		};
 	};
 };
 
@@ -429,6 +537,12 @@
 	};
 };
 
+&k3_clks {
+	/* Confiure AUDIO_EXT_REFCLK2 pin as output */
+	pinctrl-names = "default";
+	pinctrl-0 = <&audi_ext_refclk2_pins_default>;
+};
+
 &main_i2c3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c3_pins_default>;
@@ -440,6 +554,31 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
+
+	pcm3168a_1: audio-codec@44 {
+		compatible = "ti,pcm3168a";
+		reg = <0x44>;
+
+		#sound-dai-cells = <1>;
+
+		reset-gpios = <&exp3 0 GPIO_ACTIVE_LOW>;
+
+		/* C_AUDIO_REFCLK2 -> RGMII6_RXC (W26) */
+		clocks = <&k3_clks 157 371>;
+		clock-names = "scki";
+
+		/* HSDIV3_16FFT_MAIN_4_HSDIVOUT2_CLK -> REFCLK2 */
+		assigned-clocks = <&k3_clks 157 371>;
+		assigned-clock-parents = <&k3_clks 157 400>;
+		assigned-clock-rates = <24576000>; /* for 48KHz */
+
+		VDD1-supply = <&vsys_3v3>;
+		VDD2-supply = <&vsys_3v3>;
+		VCCAD1-supply = <&vsys_5v0>;
+		VCCAD2-supply = <&vsys_5v0>;
+		VCCDA1-supply = <&vsys_5v0>;
+		VCCDA2-supply = <&vsys_5v0>;
+	};
 };
 
 &main_i2c6 {
@@ -492,3 +631,23 @@
 				 <&k3_clks 152 11>,	/* PLL18_HSDIV0 */
 				 <&k3_clks 152 18>;	/* PLL23_HSDIV0 */
 };
+
+&mcasp10 {
+	#sound-dai-cells = <0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcasp10_pins_default>;
+
+	op-mode = <0>;          /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	auxclk-fs-ratio = <256>;
+
+	serial-dir = <	/* 0: INACTIVE, 1: TX, 2: RX */
+		1 1 1 1
+		2 2 2 0
+	>;
+	tx-num-evt = <0>;
+	rx-num-evt = <0>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 96c929da639d..d14060207f00 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -2,8 +2,11 @@
 /*
  * Device Tree Source for J721E SoC Family Main Domain peripherals
  *
- * Copyright (C) 2016-2019 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2016-2019 Texas Instruments Incorporated - https://www.ti.com/
  */
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/mux/mux.h>
+#include <dt-bindings/mux/mux-j721e-wiz.h>
 
 &cbass_main {
 	msmc_ram: sram@70000000 {
@@ -18,6 +21,38 @@
 		};
 	};
 
+	scm_conf: scm-conf@100000 {
+		compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
+		reg = <0 0x00100000 0 0x1c000>; /* excludes pinctrl region */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x00100000 0x1c000>;
+
+		serdes_ln_ctrl: serdes-ln-ctrl@4080 {
+			compatible = "mmio-mux";
+			reg = <0x00004080 0x50>;
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x4080 0x3>, <0x4084 0x3>, /* SERDES0 lane0/1 select */
+					<0x4090 0x3>, <0x4094 0x3>, /* SERDES1 lane0/1 select */
+					<0x40a0 0x3>, <0x40a4 0x3>, /* SERDES2 lane0/1 select */
+					<0x40b0 0x3>, <0x40b4 0x3>, /* SERDES3 lane0/1 select */
+					<0x40c0 0x3>, <0x40c4 0x3>, <0x40c8 0x3>, <0x40cc 0x3>;
+					/* SERDES4 lane0/1/2/3 select */
+			idle-states = <SERDES0_LANE0_PCIE0_LANE0>, <SERDES0_LANE1_PCIE0_LANE1>,
+				      <SERDES1_LANE0_PCIE1_LANE0>, <SERDES1_LANE1_PCIE1_LANE1>,
+				      <SERDES2_LANE0_PCIE2_LANE0>, <SERDES2_LANE1_PCIE2_LANE1>,
+				      <MUX_IDLE_AS_IS>, <SERDES3_LANE1_USB3_0>,
+				      <SERDES4_LANE0_EDP_LANE0>, <SERDES4_LANE1_EDP_LANE1>, <SERDES4_LANE2_EDP_LANE2>, <SERDES4_LANE3_EDP_LANE3>;
+		};
+
+		usb_serdes_mux: mux-controller@4000 {
+			compatible = "mmio-mux";
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x4000 0x8000000>, /* USB0 to SERDES0/3 mux */
+					<0x4010 0x8000000>; /* USB1 to SERDES1/2 mux */
+	    };
+	};
+
 	gic500: interrupt-controller@1800000 {
 		compatible = "arm,gic-v3";
 		#address-cells = <2>;
@@ -31,7 +66,7 @@
 		/* vcpumntirq: virtual CPU interface maintenance interrupt */
 		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 
-		gic_its: gic-its@1820000 {
+		gic_its: msi-controller@1820000 {
 			compatible = "arm,gic-v3-its";
 			reg = <0x00 0x01820000 0x00 0x10000>;
 			socionext,synquacer-pre-its = <0x1000000 0x400000>;
@@ -95,7 +130,7 @@
 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		smmu0: smmu@36600000 {
+		smmu0: iommu@36600000 {
 			compatible = "arm,smmu-v3";
 			reg = <0x0 0x36600000 0x0 0x100000>;
 			interrupt-parent = <&gic500>;
@@ -277,6 +312,246 @@
 		pinctrl-single,function-mask = <0xffffffff>;
 	};
 
+	dummy_cmn_refclk: dummy-cmn-refclk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <100000000>;
+	};
+
+	dummy_cmn_refclk1: dummy-cmn-refclk1 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <100000000>;
+	};
+
+	serdes_wiz0: wiz@5000000 {
+		compatible = "ti,j721e-wiz-16g";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		power-domains = <&k3_pds 292 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 292 5>, <&k3_clks 292 11>, <&dummy_cmn_refclk>;
+		clock-names = "fck", "core_ref_clk", "ext_ref_clk";
+		assigned-clocks = <&k3_clks 292 11>, <&k3_clks 292 0>;
+		assigned-clock-parents = <&k3_clks 292 15>, <&k3_clks 292 4>;
+		num-lanes = <2>;
+		#reset-cells = <1>;
+		ranges = <0x5000000 0x0 0x5000000 0x10000>;
+
+		wiz0_pll0_refclk: pll0-refclk {
+			clocks = <&k3_clks 292 11>, <&dummy_cmn_refclk>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz0_pll0_refclk>;
+			assigned-clock-parents = <&k3_clks 292 11>;
+		};
+
+		wiz0_pll1_refclk: pll1-refclk {
+			clocks = <&k3_clks 292 0>, <&dummy_cmn_refclk1>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz0_pll1_refclk>;
+			assigned-clock-parents = <&k3_clks 292 0>;
+		};
+
+		wiz0_refclk_dig: refclk-dig {
+			clocks = <&k3_clks 292 11>, <&k3_clks 292 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz0_refclk_dig>;
+			assigned-clock-parents = <&k3_clks 292 11>;
+		};
+
+		wiz0_cmn_refclk_dig_div: cmn-refclk-dig-div {
+			clocks = <&wiz0_refclk_dig>;
+			#clock-cells = <0>;
+		};
+
+		wiz0_cmn_refclk1_dig_div: cmn-refclk1-dig-div {
+			clocks = <&wiz0_pll1_refclk>;
+			#clock-cells = <0>;
+		};
+
+		serdes0: serdes@5000000 {
+			compatible = "ti,sierra-phy-t0";
+			reg-names = "serdes";
+			reg = <0x5000000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			resets = <&serdes_wiz0 0>;
+			reset-names = "sierra_reset";
+			clocks = <&wiz0_cmn_refclk_dig_div>, <&wiz0_cmn_refclk1_dig_div>;
+			clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div";
+		};
+	};
+
+	serdes_wiz1: wiz@5010000 {
+		compatible = "ti,j721e-wiz-16g";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		power-domains = <&k3_pds 293 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 293 5>, <&k3_clks 293 13>, <&dummy_cmn_refclk>;
+		clock-names = "fck", "core_ref_clk", "ext_ref_clk";
+		assigned-clocks = <&k3_clks 293 13>, <&k3_clks 293 0>;
+		assigned-clock-parents = <&k3_clks 293 17>, <&k3_clks 293 4>;
+		num-lanes = <2>;
+		#reset-cells = <1>;
+		ranges = <0x5010000 0x0 0x5010000 0x10000>;
+
+		wiz1_pll0_refclk: pll0-refclk {
+			clocks = <&k3_clks 293 13>, <&dummy_cmn_refclk>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz1_pll0_refclk>;
+			assigned-clock-parents = <&k3_clks 293 13>;
+		};
+
+		wiz1_pll1_refclk: pll1-refclk {
+			clocks = <&k3_clks 293 0>, <&dummy_cmn_refclk1>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz1_pll1_refclk>;
+			assigned-clock-parents = <&k3_clks 293 0>;
+		};
+
+		wiz1_refclk_dig: refclk-dig {
+			clocks = <&k3_clks 293 13>, <&k3_clks 293 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz1_refclk_dig>;
+			assigned-clock-parents = <&k3_clks 293 13>;
+		};
+
+		wiz1_cmn_refclk_dig_div: cmn-refclk-dig-div{
+			clocks = <&wiz1_refclk_dig>;
+			#clock-cells = <0>;
+		};
+
+		wiz1_cmn_refclk1_dig_div: cmn-refclk1-dig-div {
+			clocks = <&wiz1_pll1_refclk>;
+			#clock-cells = <0>;
+		};
+
+		serdes1: serdes@5010000 {
+			compatible = "ti,sierra-phy-t0";
+			reg-names = "serdes";
+			reg = <0x5010000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			resets = <&serdes_wiz1 0>;
+			reset-names = "sierra_reset";
+			clocks = <&wiz1_cmn_refclk_dig_div>, <&wiz1_cmn_refclk1_dig_div>;
+			clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div";
+		};
+	};
+
+	serdes_wiz2: wiz@5020000 {
+		compatible = "ti,j721e-wiz-16g";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		power-domains = <&k3_pds 294 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 294 5>, <&k3_clks 294 11>, <&dummy_cmn_refclk>;
+		clock-names = "fck", "core_ref_clk", "ext_ref_clk";
+		assigned-clocks = <&k3_clks 294 11>, <&k3_clks 294 0>;
+		assigned-clock-parents = <&k3_clks 294 15>, <&k3_clks 294 4>;
+		num-lanes = <2>;
+		#reset-cells = <1>;
+		ranges = <0x5020000 0x0 0x5020000 0x10000>;
+
+		wiz2_pll0_refclk: pll0-refclk {
+			clocks = <&k3_clks 294 11>, <&dummy_cmn_refclk>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz2_pll0_refclk>;
+			assigned-clock-parents = <&k3_clks 294 11>;
+		};
+
+		wiz2_pll1_refclk: pll1-refclk {
+			clocks = <&k3_clks 294 0>, <&dummy_cmn_refclk1>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz2_pll1_refclk>;
+			assigned-clock-parents = <&k3_clks 294 0>;
+		};
+
+		wiz2_refclk_dig: refclk-dig {
+			clocks = <&k3_clks 294 11>, <&k3_clks 294 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz2_refclk_dig>;
+			assigned-clock-parents = <&k3_clks 294 11>;
+		};
+
+		wiz2_cmn_refclk_dig_div: cmn-refclk-dig-div {
+			clocks = <&wiz2_refclk_dig>;
+			#clock-cells = <0>;
+		};
+
+		wiz2_cmn_refclk1_dig_div: cmn-refclk1-dig-div {
+			clocks = <&wiz2_pll1_refclk>;
+			#clock-cells = <0>;
+		};
+
+		serdes2: serdes@5020000 {
+			compatible = "ti,sierra-phy-t0";
+			reg-names = "serdes";
+			reg = <0x5020000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			resets = <&serdes_wiz2 0>;
+			reset-names = "sierra_reset";
+			clocks = <&wiz2_cmn_refclk_dig_div>, <&wiz2_cmn_refclk1_dig_div>;
+			clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div";
+		};
+	};
+
+	serdes_wiz3: wiz@5030000 {
+		compatible = "ti,j721e-wiz-16g";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		power-domains = <&k3_pds 295 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 295 5>, <&k3_clks 295 9>, <&dummy_cmn_refclk>;
+		clock-names = "fck", "core_ref_clk", "ext_ref_clk";
+		assigned-clocks = <&k3_clks 295 9>, <&k3_clks 295 0>;
+		assigned-clock-parents = <&k3_clks 295 13>, <&k3_clks 295 4>;
+		num-lanes = <2>;
+		#reset-cells = <1>;
+		ranges = <0x5030000 0x0 0x5030000 0x10000>;
+
+		wiz3_pll0_refclk: pll0-refclk {
+			clocks = <&k3_clks 295 9>, <&dummy_cmn_refclk>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz3_pll0_refclk>;
+			assigned-clock-parents = <&k3_clks 295 9>;
+		};
+
+		wiz3_pll1_refclk: pll1-refclk {
+			clocks = <&k3_clks 295 0>, <&dummy_cmn_refclk1>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz3_pll1_refclk>;
+			assigned-clock-parents = <&k3_clks 295 0>;
+		};
+
+		wiz3_refclk_dig: refclk-dig {
+			clocks = <&k3_clks 295 9>, <&k3_clks 295 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>;
+			#clock-cells = <0>;
+			assigned-clocks = <&wiz3_refclk_dig>;
+			assigned-clock-parents = <&k3_clks 295 9>;
+		};
+
+		wiz3_cmn_refclk_dig_div: cmn-refclk-dig-div {
+			clocks = <&wiz3_refclk_dig>;
+			#clock-cells = <0>;
+		};
+
+		wiz3_cmn_refclk1_dig_div: cmn-refclk1-dig-div {
+			clocks = <&wiz3_pll1_refclk>;
+			#clock-cells = <0>;
+		};
+
+		serdes3: serdes@5030000 {
+			compatible = "ti,sierra-phy-t0";
+			reg-names = "serdes";
+			reg = <0x5030000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			resets = <&serdes_wiz3 0>;
+			reset-names = "sierra_reset";
+			clocks = <&wiz3_cmn_refclk_dig_div>, <&wiz3_cmn_refclk1_dig_div>;
+			clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div";
+		};
+	};
+
 	main_uart0: serial@2800000 {
 		compatible = "ti,j721e-uart", "ti,am654-uart";
 		reg = <0x00 0x02800000 0x00 0x100>;
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
index dc31bd0434cb..30a735bcd0c8 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
@@ -2,7 +2,7 @@
 /*
  * Device Tree Source for J721E SoC Family MCU/WAKEUP Domain peripherals
  *
- * Copyright (C) 2016-2019 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2016-2019 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 &cbass_mcu_wakeup {
@@ -48,6 +48,11 @@
 		};
 	};
 
+	chipid@43000014 {
+		compatible = "ti,am654-chipid";
+		reg = <0x0 0x43000014 0x0 0x4>;
+	};
+
 	wkup_pmx0: pinmux@4301c000 {
 		compatible = "pinctrl-single";
 		/* Proxy 0 addressing */
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
index 7680109ca60a..8fa3361e5e45 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/ti/k3-j721e.dtsi b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
index 2f9a56d9b114..d035b61e0e16 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
@@ -2,7 +2,7 @@
 /*
  * Device Tree Source for J721E SoC Family
  *
- * Copyright (C) 2016-2019 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2016-2019 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 #include <dt-bindings/interrupt-controller/irq.h>
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 883e8bace3ed..e0f33826819f 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -66,6 +66,7 @@ CONFIG_SCHED_SMT=y
 CONFIG_NUMA=y
 CONFIG_SECCOMP=y
 CONFIG_KEXEC=y
+CONFIG_KEXEC_FILE=y
 CONFIG_CRASH_DUMP=y
 CONFIG_XEN=y
 CONFIG_COMPAT=y
@@ -161,6 +162,18 @@ CONFIG_NET_DSA=m
 CONFIG_VLAN_8021Q=m
 CONFIG_VLAN_8021Q_GVRP=y
 CONFIG_VLAN_8021Q_MVRP=y
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_CBS=m
+CONFIG_NET_SCH_ETF=m
+CONFIG_NET_SCH_TAPRIO=m
+CONFIG_NET_SCH_MQPRIO=m
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_FLOWER=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_GACT=m
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_GATE=m
 CONFIG_QRTR=m
 CONFIG_QRTR_SMD=m
 CONFIG_QRTR_TUN=m
@@ -194,7 +207,7 @@ CONFIG_HOTPLUG_PCI=y
 CONFIG_HOTPLUG_PCI_ACPI=y
 CONFIG_PCI_AARDVARK=y
 CONFIG_PCI_TEGRA=y
-CONFIG_PCIE_RCAR=y
+CONFIG_PCIE_RCAR_HOST=y
 CONFIG_PCI_HOST_GENERIC=y
 CONFIG_PCI_XGENE=y
 CONFIG_PCIE_ALTERA=y
@@ -291,6 +304,7 @@ CONFIG_FSL_DPAA_ETH=y
 CONFIG_FSL_DPAA2_ETH=y
 CONFIG_FSL_ENETC=y
 CONFIG_FSL_ENETC_VF=y
+CONFIG_FSL_ENETC_QOS=y
 CONFIG_HIX5HD2_GMAC=y
 CONFIG_HNS_DSAF=y
 CONFIG_HNS_ENET=y
@@ -309,6 +323,7 @@ CONFIG_MLX5_CORE=m
 CONFIG_MLX5_CORE_EN=y
 CONFIG_QCOM_EMAC=m
 CONFIG_RMNET=m
+CONFIG_SH_ETH=y
 CONFIG_RAVB=y
 CONFIG_SMC91X=y
 CONFIG_SMSC911X=y
@@ -469,6 +484,7 @@ CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
 CONFIG_PINCTRL_SC7180=y
 CONFIG_PINCTRL_SDM845=y
 CONFIG_PINCTRL_SM8150=y
+CONFIG_PINCTRL_SM8250=y
 CONFIG_GPIO_ALTERA=m
 CONFIG_GPIO_DWAPB=y
 CONFIG_GPIO_MB86S7X=y
@@ -556,6 +572,7 @@ CONFIG_REGULATOR_HI6421V530=y
 CONFIG_REGULATOR_HI655X=y
 CONFIG_REGULATOR_MAX77620=y
 CONFIG_REGULATOR_MAX8973=y
+CONFIG_REGULATOR_PCA9450=y
 CONFIG_REGULATOR_PFUZE100=y
 CONFIG_REGULATOR_PWM=y
 CONFIG_REGULATOR_QCOM_RPMH=y
@@ -593,6 +610,8 @@ CONFIG_VIDEO_RENESAS_FCP=m
 CONFIG_VIDEO_RENESAS_VSP1=m
 CONFIG_SDR_PLATFORM_DRIVERS=y
 CONFIG_VIDEO_RCAR_DRIF=m
+CONFIG_VIDEO_IMX219=m
+CONFIG_VIDEO_OV5645=m
 CONFIG_VIDEO_QCOM_CAMSS=m
 CONFIG_DRM=m
 CONFIG_DRM_I2C_NXP_TDA998X=m
@@ -628,6 +647,7 @@ CONFIG_DRM_SII902X=m
 CONFIG_DRM_THINE_THC63LVD1024=m
 CONFIG_DRM_TI_SN65DSI86=m
 CONFIG_DRM_I2C_ADV7511=m
+CONFIG_DRM_I2C_ADV7511_AUDIO=y
 CONFIG_DRM_DW_HDMI_AHB_AUDIO=m
 CONFIG_DRM_DW_HDMI_CEC=m
 CONFIG_DRM_VC4=m
@@ -653,6 +673,7 @@ CONFIG_SND_HDA_TEGRA=m
 CONFIG_SND_HDA_CODEC_HDMI=m
 CONFIG_SND_SOC=y
 CONFIG_SND_BCM2835_SOC_I2S=m
+CONFIG_SND_SOC_FSL_SAI=m
 CONFIG_SND_MESON_AXG_SOUND_CARD=m
 CONFIG_SND_MESON_GX_SOUND_CARD=m
 CONFIG_SND_SOC_SDM845=m
@@ -670,6 +691,7 @@ CONFIG_SND_SOC_PCM3168A_I2C=m
 CONFIG_SND_SOC_SIMPLE_AMPLIFIER=m
 CONFIG_SND_SOC_TAS571X=m
 CONFIG_SND_SOC_WCD934X=m
+CONFIG_SND_SOC_WM8904=m
 CONFIG_SND_SOC_WSA881X=m
 CONFIG_SND_SIMPLE_CARD=m
 CONFIG_SND_AUDIO_GRAPH_CARD=m
@@ -731,6 +753,7 @@ CONFIG_MMC_DW_ROCKCHIP=y
 CONFIG_MMC_SUNXI=y
 CONFIG_MMC_BCM2835=y
 CONFIG_MMC_SDHCI_XENON=y
+CONFIG_MMC_SDHCI_AM654=y
 CONFIG_MMC_OWL=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
@@ -751,6 +774,7 @@ CONFIG_RTC_DRV_MAX77686=y
 CONFIG_RTC_DRV_RK808=m
 CONFIG_RTC_DRV_PCF85363=m
 CONFIG_RTC_DRV_RX8581=m
+CONFIG_RTC_DRV_RV8803=m
 CONFIG_RTC_DRV_S5M=y
 CONFIG_RTC_DRV_DS3232=y
 CONFIG_RTC_DRV_PCF2127=m
@@ -760,6 +784,7 @@ CONFIG_RTC_DRV_S3C=y
 CONFIG_RTC_DRV_PL031=y
 CONFIG_RTC_DRV_SUN6I=y
 CONFIG_RTC_DRV_ARMADA38X=y
+CONFIG_RTC_DRV_PM8XXX=m
 CONFIG_RTC_DRV_TEGRA=y
 CONFIG_RTC_DRV_SNVS=m
 CONFIG_RTC_DRV_IMX_SC=m
@@ -789,12 +814,16 @@ CONFIG_VIRTIO_BALLOON=y
 CONFIG_VIRTIO_MMIO=y
 CONFIG_XEN_GNTDEV=y
 CONFIG_XEN_GRANT_DEV_ALLOC=y
-CONFIG_MFD_CROS_EC=y
+CONFIG_MFD_CROS_EC_DEV=y
+CONFIG_CHROME_PLATFORMS=y
+CONFIG_CROS_EC=y
 CONFIG_CROS_EC_I2C=y
 CONFIG_CROS_EC_SPI=y
+CONFIG_CROS_EC_CHARDEV=m
 CONFIG_COMMON_CLK_RK808=y
 CONFIG_COMMON_CLK_SCPI=y
 CONFIG_COMMON_CLK_CS2000_CP=y
+CONFIG_COMMON_CLK_FSL_SAI=y
 CONFIG_COMMON_CLK_S2MPS11=y
 CONFIG_COMMON_CLK_PWM=y
 CONFIG_COMMON_CLK_VC5=y
@@ -821,6 +850,7 @@ CONFIG_SC_GCC_7180=y
 CONFIG_SDM_CAMCC_845=m
 CONFIG_SDM_GCC_845=y
 CONFIG_SDM_GPUCC_845=y
+CONFIG_SDM_VIDEOCC_845=y
 CONFIG_SDM_DISPCC_845=y
 CONFIG_SM_GCC_8150=y
 CONFIG_SM_GCC_8250=y
@@ -832,6 +862,7 @@ CONFIG_IMX_MBOX=y
 CONFIG_PLATFORM_MHU=y
 CONFIG_BCM2835_MBOX=y
 CONFIG_QCOM_APCS_IPC=y
+CONFIG_QCOM_IPCC=y
 CONFIG_ROCKCHIP_IOMMU=y
 CONFIG_TEGRA_IOMMU_SMMU=y
 CONFIG_ARM_SMMU=y
@@ -850,12 +881,12 @@ CONFIG_OWL_PM_DOMAINS=y
 CONFIG_RASPBERRYPI_POWER=y
 CONFIG_FSL_DPAA=y
 CONFIG_FSL_MC_DPIO=y
-CONFIG_IMX_SCU_SOC=y
 CONFIG_QCOM_AOSS_QMP=y
 CONFIG_QCOM_GENI_SE=y
 CONFIG_QCOM_RMTFS_MEM=m
 CONFIG_QCOM_RPMH=y
 CONFIG_QCOM_RPMHPD=y
+CONFIG_QCOM_RPMPD=y
 CONFIG_QCOM_SMEM=y
 CONFIG_QCOM_SMD_RPM=y
 CONFIG_QCOM_SMP2P=y
@@ -865,6 +896,7 @@ CONFIG_QCOM_APR=m
 CONFIG_ARCH_R8A774A1=y
 CONFIG_ARCH_R8A774B1=y
 CONFIG_ARCH_R8A774C0=y
+CONFIG_ARCH_R8A774E1=y
 CONFIG_ARCH_R8A77950=y
 CONFIG_ARCH_R8A77951=y
 CONFIG_ARCH_R8A77960=y
diff --git a/arch/arm64/crypto/ghash-ce-glue.c b/arch/arm64/crypto/ghash-ce-glue.c
index 22831d3b7f62..da1034867aaa 100644
--- a/arch/arm64/crypto/ghash-ce-glue.c
+++ b/arch/arm64/crypto/ghash-ce-glue.c
@@ -31,12 +31,8 @@ MODULE_ALIAS_CRYPTO("ghash");
 #define GCM_IV_SIZE		12
 
 struct ghash_key {
-	u64			h[2];
-	u64			h2[2];
-	u64			h3[2];
-	u64			h4[2];
-
 	be128			k;
+	u64			h[][2];
 };
 
 struct ghash_desc_ctx {
@@ -51,22 +47,18 @@ struct gcm_aes_ctx {
 };
 
 asmlinkage void pmull_ghash_update_p64(int blocks, u64 dg[], const char *src,
-				       struct ghash_key const *k,
-				       const char *head);
+				       u64 const h[][2], const char *head);
 
 asmlinkage void pmull_ghash_update_p8(int blocks, u64 dg[], const char *src,
-				      struct ghash_key const *k,
-				      const char *head);
+				      u64 const h[][2], const char *head);
 
 asmlinkage void pmull_gcm_encrypt(int bytes, u8 dst[], const u8 src[],
-				  struct ghash_key const *k, u64 dg[],
-				  u8 ctr[], u32 const rk[], int rounds,
-				  u8 tag[]);
+				  u64 const h[][2], u64 dg[], u8 ctr[],
+				  u32 const rk[], int rounds, u8 tag[]);
 
 asmlinkage void pmull_gcm_decrypt(int bytes, u8 dst[], const u8 src[],
-				  struct ghash_key const *k, u64 dg[],
-				  u8 ctr[], u32 const rk[], int rounds,
-				  u8 tag[]);
+				  u64 const h[][2], u64 dg[], u8 ctr[],
+				  u32 const rk[], int rounds, u8 tag[]);
 
 static int ghash_init(struct shash_desc *desc)
 {
@@ -77,48 +69,51 @@ static int ghash_init(struct shash_desc *desc)
 }
 
 static void ghash_do_update(int blocks, u64 dg[], const char *src,
-			    struct ghash_key *key, const char *head,
-			    void (*simd_update)(int blocks, u64 dg[],
-						const char *src,
-						struct ghash_key const *k,
-						const char *head))
+			    struct ghash_key *key, const char *head)
 {
-	if (likely(crypto_simd_usable() && simd_update)) {
-		kernel_neon_begin();
-		simd_update(blocks, dg, src, key, head);
-		kernel_neon_end();
-	} else {
-		be128 dst = { cpu_to_be64(dg[1]), cpu_to_be64(dg[0]) };
+	be128 dst = { cpu_to_be64(dg[1]), cpu_to_be64(dg[0]) };
 
-		do {
-			const u8 *in = src;
-
-			if (head) {
-				in = head;
-				blocks++;
-				head = NULL;
-			} else {
-				src += GHASH_BLOCK_SIZE;
-			}
+	do {
+		const u8 *in = src;
+
+		if (head) {
+			in = head;
+			blocks++;
+			head = NULL;
+		} else {
+			src += GHASH_BLOCK_SIZE;
+		}
 
-			crypto_xor((u8 *)&dst, in, GHASH_BLOCK_SIZE);
-			gf128mul_lle(&dst, &key->k);
-		} while (--blocks);
+		crypto_xor((u8 *)&dst, in, GHASH_BLOCK_SIZE);
+		gf128mul_lle(&dst, &key->k);
+	} while (--blocks);
 
-		dg[0] = be64_to_cpu(dst.b);
-		dg[1] = be64_to_cpu(dst.a);
+	dg[0] = be64_to_cpu(dst.b);
+	dg[1] = be64_to_cpu(dst.a);
+}
+
+static __always_inline
+void ghash_do_simd_update(int blocks, u64 dg[], const char *src,
+			  struct ghash_key *key, const char *head,
+			  void (*simd_update)(int blocks, u64 dg[],
+					      const char *src,
+					      u64 const h[][2],
+					      const char *head))
+{
+	if (likely(crypto_simd_usable())) {
+		kernel_neon_begin();
+		simd_update(blocks, dg, src, key->h, head);
+		kernel_neon_end();
+	} else {
+		ghash_do_update(blocks, dg, src, key, head);
 	}
 }
 
 /* avoid hogging the CPU for too long */
 #define MAX_BLOCKS	(SZ_64K / GHASH_BLOCK_SIZE)
 
-static int __ghash_update(struct shash_desc *desc, const u8 *src,
-			  unsigned int len,
-			  void (*simd_update)(int blocks, u64 dg[],
-					      const char *src,
-					      struct ghash_key const *k,
-					      const char *head))
+static int ghash_update(struct shash_desc *desc, const u8 *src,
+			unsigned int len)
 {
 	struct ghash_desc_ctx *ctx = shash_desc_ctx(desc);
 	unsigned int partial = ctx->count % GHASH_BLOCK_SIZE;
@@ -143,9 +138,9 @@ static int __ghash_update(struct shash_desc *desc, const u8 *src,
 		do {
 			int chunk = min(blocks, MAX_BLOCKS);
 
-			ghash_do_update(chunk, ctx->digest, src, key,
-					partial ? ctx->buf : NULL,
-					simd_update);
+			ghash_do_simd_update(chunk, ctx->digest, src, key,
+					     partial ? ctx->buf : NULL,
+					     pmull_ghash_update_p8);
 
 			blocks -= chunk;
 			src += chunk * GHASH_BLOCK_SIZE;
@@ -157,39 +152,7 @@ static int __ghash_update(struct shash_desc *desc, const u8 *src,
 	return 0;
 }
 
-static int ghash_update_p8(struct shash_desc *desc, const u8 *src,
-			   unsigned int len)
-{
-	return __ghash_update(desc, src, len, pmull_ghash_update_p8);
-}
-
-static int ghash_update_p64(struct shash_desc *desc, const u8 *src,
-			    unsigned int len)
-{
-	return __ghash_update(desc, src, len, pmull_ghash_update_p64);
-}
-
-static int ghash_final_p8(struct shash_desc *desc, u8 *dst)
-{
-	struct ghash_desc_ctx *ctx = shash_desc_ctx(desc);
-	unsigned int partial = ctx->count % GHASH_BLOCK_SIZE;
-
-	if (partial) {
-		struct ghash_key *key = crypto_shash_ctx(desc->tfm);
-
-		memset(ctx->buf + partial, 0, GHASH_BLOCK_SIZE - partial);
-
-		ghash_do_update(1, ctx->digest, ctx->buf, key, NULL,
-				pmull_ghash_update_p8);
-	}
-	put_unaligned_be64(ctx->digest[1], dst);
-	put_unaligned_be64(ctx->digest[0], dst + 8);
-
-	*ctx = (struct ghash_desc_ctx){};
-	return 0;
-}
-
-static int ghash_final_p64(struct shash_desc *desc, u8 *dst)
+static int ghash_final(struct shash_desc *desc, u8 *dst)
 {
 	struct ghash_desc_ctx *ctx = shash_desc_ctx(desc);
 	unsigned int partial = ctx->count % GHASH_BLOCK_SIZE;
@@ -199,8 +162,8 @@ static int ghash_final_p64(struct shash_desc *desc, u8 *dst)
 
 		memset(ctx->buf + partial, 0, GHASH_BLOCK_SIZE - partial);
 
-		ghash_do_update(1, ctx->digest, ctx->buf, key, NULL,
-				pmull_ghash_update_p64);
+		ghash_do_simd_update(1, ctx->digest, ctx->buf, key, NULL,
+				     pmull_ghash_update_p8);
 	}
 	put_unaligned_be64(ctx->digest[1], dst);
 	put_unaligned_be64(ctx->digest[0], dst + 8);
@@ -220,29 +183,6 @@ static void ghash_reflect(u64 h[], const be128 *k)
 		h[1] ^= 0xc200000000000000UL;
 }
 
-static int __ghash_setkey(struct ghash_key *key,
-			  const u8 *inkey, unsigned int keylen)
-{
-	be128 h;
-
-	/* needed for the fallback */
-	memcpy(&key->k, inkey, GHASH_BLOCK_SIZE);
-
-	ghash_reflect(key->h, &key->k);
-
-	h = key->k;
-	gf128mul_lle(&h, &key->k);
-	ghash_reflect(key->h2, &h);
-
-	gf128mul_lle(&h, &key->k);
-	ghash_reflect(key->h3, &h);
-
-	gf128mul_lle(&h, &key->k);
-	ghash_reflect(key->h4, &h);
-
-	return 0;
-}
-
 static int ghash_setkey(struct crypto_shash *tfm,
 			const u8 *inkey, unsigned int keylen)
 {
@@ -251,38 +191,28 @@ static int ghash_setkey(struct crypto_shash *tfm,
 	if (keylen != GHASH_BLOCK_SIZE)
 		return -EINVAL;
 
-	return __ghash_setkey(key, inkey, keylen);
+	/* needed for the fallback */
+	memcpy(&key->k, inkey, GHASH_BLOCK_SIZE);
+
+	ghash_reflect(key->h[0], &key->k);
+	return 0;
 }
 
-static struct shash_alg ghash_alg[] = {{
+static struct shash_alg ghash_alg = {
 	.base.cra_name		= "ghash",
 	.base.cra_driver_name	= "ghash-neon",
 	.base.cra_priority	= 150,
 	.base.cra_blocksize	= GHASH_BLOCK_SIZE,
-	.base.cra_ctxsize	= sizeof(struct ghash_key),
-	.base.cra_module	= THIS_MODULE,
-
-	.digestsize		= GHASH_DIGEST_SIZE,
-	.init			= ghash_init,
-	.update			= ghash_update_p8,
-	.final			= ghash_final_p8,
-	.setkey			= ghash_setkey,
-	.descsize		= sizeof(struct ghash_desc_ctx),
-}, {
-	.base.cra_name		= "ghash",
-	.base.cra_driver_name	= "ghash-ce",
-	.base.cra_priority	= 200,
-	.base.cra_blocksize	= GHASH_BLOCK_SIZE,
-	.base.cra_ctxsize	= sizeof(struct ghash_key),
+	.base.cra_ctxsize	= sizeof(struct ghash_key) + sizeof(u64[2]),
 	.base.cra_module	= THIS_MODULE,
 
 	.digestsize		= GHASH_DIGEST_SIZE,
 	.init			= ghash_init,
-	.update			= ghash_update_p64,
-	.final			= ghash_final_p64,
+	.update			= ghash_update,
+	.final			= ghash_final,
 	.setkey			= ghash_setkey,
 	.descsize		= sizeof(struct ghash_desc_ctx),
-}};
+};
 
 static int num_rounds(struct crypto_aes_ctx *ctx)
 {
@@ -301,6 +231,7 @@ static int gcm_setkey(struct crypto_aead *tfm, const u8 *inkey,
 {
 	struct gcm_aes_ctx *ctx = crypto_aead_ctx(tfm);
 	u8 key[GHASH_BLOCK_SIZE];
+	be128 h;
 	int ret;
 
 	ret = aes_expandkey(&ctx->aes_key, inkey, keylen);
@@ -309,7 +240,22 @@ static int gcm_setkey(struct crypto_aead *tfm, const u8 *inkey,
 
 	aes_encrypt(&ctx->aes_key, key, (u8[AES_BLOCK_SIZE]){});
 
-	return __ghash_setkey(&ctx->ghash_key, key, sizeof(be128));
+	/* needed for the fallback */
+	memcpy(&ctx->ghash_key.k, key, GHASH_BLOCK_SIZE);
+
+	ghash_reflect(ctx->ghash_key.h[0], &ctx->ghash_key.k);
+
+	h = ctx->ghash_key.k;
+	gf128mul_lle(&h, &ctx->ghash_key.k);
+	ghash_reflect(ctx->ghash_key.h[1], &h);
+
+	gf128mul_lle(&h, &ctx->ghash_key.k);
+	ghash_reflect(ctx->ghash_key.h[2], &h);
+
+	gf128mul_lle(&h, &ctx->ghash_key.k);
+	ghash_reflect(ctx->ghash_key.h[3], &h);
+
+	return 0;
 }
 
 static int gcm_setauthsize(struct crypto_aead *tfm, unsigned int authsize)
@@ -341,9 +287,9 @@ static void gcm_update_mac(u64 dg[], const u8 *src, int count, u8 buf[],
 	if (count >= GHASH_BLOCK_SIZE || *buf_count == GHASH_BLOCK_SIZE) {
 		int blocks = count / GHASH_BLOCK_SIZE;
 
-		ghash_do_update(blocks, dg, src, &ctx->ghash_key,
-				*buf_count ? buf : NULL,
-				pmull_ghash_update_p64);
+		ghash_do_simd_update(blocks, dg, src, &ctx->ghash_key,
+				     *buf_count ? buf : NULL,
+				     pmull_ghash_update_p64);
 
 		src += blocks * GHASH_BLOCK_SIZE;
 		count %= GHASH_BLOCK_SIZE;
@@ -387,8 +333,8 @@ static void gcm_calculate_auth_mac(struct aead_request *req, u64 dg[])
 
 	if (buf_count) {
 		memset(&buf[buf_count], 0, GHASH_BLOCK_SIZE - buf_count);
-		ghash_do_update(1, dg, buf, &ctx->ghash_key, NULL,
-				pmull_ghash_update_p64);
+		ghash_do_simd_update(1, dg, buf, &ctx->ghash_key, NULL,
+				     pmull_ghash_update_p64);
 	}
 }
 
@@ -433,8 +379,8 @@ static int gcm_encrypt(struct aead_request *req)
 			}
 
 			kernel_neon_begin();
-			pmull_gcm_encrypt(nbytes, dst, src, &ctx->ghash_key, dg,
-					  iv, ctx->aes_key.key_enc, nrounds,
+			pmull_gcm_encrypt(nbytes, dst, src, ctx->ghash_key.h,
+					  dg, iv, ctx->aes_key.key_enc, nrounds,
 					  tag);
 			kernel_neon_end();
 
@@ -464,7 +410,7 @@ static int gcm_encrypt(struct aead_request *req)
 			} while (--remaining > 0);
 
 			ghash_do_update(blocks, dg, walk.dst.virt.addr,
-					&ctx->ghash_key, NULL, NULL);
+					&ctx->ghash_key, NULL);
 
 			err = skcipher_walk_done(&walk,
 						 walk.nbytes % AES_BLOCK_SIZE);
@@ -483,7 +429,7 @@ static int gcm_encrypt(struct aead_request *req)
 
 		tag = (u8 *)&lengths;
 		ghash_do_update(1, dg, tag, &ctx->ghash_key,
-				walk.nbytes ? buf : NULL, NULL);
+				walk.nbytes ? buf : NULL);
 
 		if (walk.nbytes)
 			err = skcipher_walk_done(&walk, 0);
@@ -547,8 +493,8 @@ static int gcm_decrypt(struct aead_request *req)
 			}
 
 			kernel_neon_begin();
-			pmull_gcm_decrypt(nbytes, dst, src, &ctx->ghash_key, dg,
-					  iv, ctx->aes_key.key_enc, nrounds,
+			pmull_gcm_decrypt(nbytes, dst, src, ctx->ghash_key.h,
+					  dg, iv, ctx->aes_key.key_enc, nrounds,
 					  tag);
 			kernel_neon_end();
 
@@ -568,7 +514,7 @@ static int gcm_decrypt(struct aead_request *req)
 			u8 *dst = walk.dst.virt.addr;
 
 			ghash_do_update(blocks, dg, walk.src.virt.addr,
-					&ctx->ghash_key, NULL, NULL);
+					&ctx->ghash_key, NULL);
 
 			do {
 				aes_encrypt(&ctx->aes_key, buf, iv);
@@ -591,7 +537,7 @@ static int gcm_decrypt(struct aead_request *req)
 
 		tag = (u8 *)&lengths;
 		ghash_do_update(1, dg, tag, &ctx->ghash_key,
-				walk.nbytes ? buf : NULL, NULL);
+				walk.nbytes ? buf : NULL);
 
 		if (walk.nbytes) {
 			aes_encrypt(&ctx->aes_key, buf, iv);
@@ -635,43 +581,28 @@ static struct aead_alg gcm_aes_alg = {
 	.base.cra_driver_name	= "gcm-aes-ce",
 	.base.cra_priority	= 300,
 	.base.cra_blocksize	= 1,
-	.base.cra_ctxsize	= sizeof(struct gcm_aes_ctx),
+	.base.cra_ctxsize	= sizeof(struct gcm_aes_ctx) +
+				  4 * sizeof(u64[2]),
 	.base.cra_module	= THIS_MODULE,
 };
 
 static int __init ghash_ce_mod_init(void)
 {
-	int ret;
-
 	if (!cpu_have_named_feature(ASIMD))
 		return -ENODEV;
 
 	if (cpu_have_named_feature(PMULL))
-		ret = crypto_register_shashes(ghash_alg,
-					      ARRAY_SIZE(ghash_alg));
-	else
-		/* only register the first array element */
-		ret = crypto_register_shash(ghash_alg);
+		return crypto_register_aead(&gcm_aes_alg);
 
-	if (ret)
-		return ret;
-
-	if (cpu_have_named_feature(PMULL)) {
-		ret = crypto_register_aead(&gcm_aes_alg);
-		if (ret)
-			crypto_unregister_shashes(ghash_alg,
-						  ARRAY_SIZE(ghash_alg));
-	}
-	return ret;
+	return crypto_register_shash(&ghash_alg);
 }
 
 static void __exit ghash_ce_mod_exit(void)
 {
 	if (cpu_have_named_feature(PMULL))
-		crypto_unregister_shashes(ghash_alg, ARRAY_SIZE(ghash_alg));
+		crypto_unregister_aead(&gcm_aes_alg);
 	else
-		crypto_unregister_shash(ghash_alg);
-	crypto_unregister_aead(&gcm_aes_alg);
+		crypto_unregister_shash(&ghash_alg);
 }
 
 static const struct cpu_feature ghash_cpu_feature[] = {
diff --git a/arch/arm64/include/asm/acpi.h b/arch/arm64/include/asm/acpi.h
index a45366c3909b..bd68e1b7f29f 100644
--- a/arch/arm64/include/asm/acpi.h
+++ b/arch/arm64/include/asm/acpi.h
@@ -47,20 +47,7 @@
 pgprot_t __acpi_get_mem_attribute(phys_addr_t addr);
 
 /* ACPI table mapping after acpi_permanent_mmap is set */
-static inline void __iomem *acpi_os_ioremap(acpi_physical_address phys,
-					    acpi_size size)
-{
-	/* For normal memory we already have a cacheable mapping. */
-	if (memblock_is_map_memory(phys))
-		return (void __iomem *)__phys_to_virt(phys);
-
-	/*
-	 * We should still honor the memory's attribute here because
-	 * crash dump kernel possibly excludes some ACPI (reclaim)
-	 * regions from memblock list.
-	 */
-	return __ioremap(phys, size, __acpi_get_mem_attribute(phys));
-}
+void __iomem *acpi_os_ioremap(acpi_physical_address phys, acpi_size size);
 #define acpi_os_ioremap acpi_os_ioremap
 
 typedef u64 phys_cpuid_t;
diff --git a/arch/arm64/include/asm/alternative.h b/arch/arm64/include/asm/alternative.h
index 5e5dc05d63a0..619db9b4c9d5 100644
--- a/arch/arm64/include/asm/alternative.h
+++ b/arch/arm64/include/asm/alternative.h
@@ -73,13 +73,13 @@ static inline void apply_alternatives_module(void *start, size_t length) { }
 	".pushsection .altinstructions,\"a\"\n"				\
 	ALTINSTR_ENTRY(feature)						\
 	".popsection\n"							\
-	".pushsection .altinstr_replacement, \"a\"\n"			\
+	".subsection 1\n"						\
 	"663:\n\t"							\
 	newinstr "\n"							\
 	"664:\n\t"							\
-	".popsection\n\t"						\
 	".org	. - (664b-663b) + (662b-661b)\n\t"			\
-	".org	. - (662b-661b) + (664b-663b)\n"			\
+	".org	. - (662b-661b) + (664b-663b)\n\t"			\
+	".previous\n"							\
 	".endif\n"
 
 #define __ALTERNATIVE_CFG_CB(oldinstr, feature, cfg_enabled, cb)	\
@@ -117,9 +117,9 @@ static inline void apply_alternatives_module(void *start, size_t length) { }
 662:	.pushsection .altinstructions, "a"
 	altinstruction_entry 661b, 663f, \cap, 662b-661b, 664f-663f
 	.popsection
-	.pushsection .altinstr_replacement, "ax"
+	.subsection 1
 663:	\insn2
-664:	.popsection
+664:	.previous
 	.org	. - (664b-663b) + (662b-661b)
 	.org	. - (662b-661b) + (664b-663b)
 	.endif
@@ -160,7 +160,7 @@ static inline void apply_alternatives_module(void *start, size_t length) { }
 	.pushsection .altinstructions, "a"
 	altinstruction_entry 663f, 661f, \cap, 664f-663f, 662f-661f
 	.popsection
-	.pushsection .altinstr_replacement, "ax"
+	.subsection 1
 	.align 2	/* So GAS knows label 661 is suitably aligned */
 661:
 .endm
@@ -179,9 +179,9 @@ static inline void apply_alternatives_module(void *start, size_t length) { }
 .macro alternative_else
 662:
 	.if .Lasm_alt_mode==0
-	.pushsection .altinstr_replacement, "ax"
+	.subsection 1
 	.else
-	.popsection
+	.previous
 	.endif
 663:
 .endm
@@ -192,7 +192,7 @@ static inline void apply_alternatives_module(void *start, size_t length) { }
 .macro alternative_endif
 664:
 	.if .Lasm_alt_mode==0
-	.popsection
+	.previous
 	.endif
 	.org	. - (664b-663b) + (662b-661b)
 	.org	. - (662b-661b) + (664b-663b)
diff --git a/arch/arm64/include/asm/arch_gicv3.h b/arch/arm64/include/asm/arch_gicv3.h
index a358e97572c1..6647ae4f0231 100644
--- a/arch/arm64/include/asm/arch_gicv3.h
+++ b/arch/arm64/include/asm/arch_gicv3.h
@@ -109,7 +109,7 @@ static inline u32 gic_read_pmr(void)
 	return read_sysreg_s(SYS_ICC_PMR_EL1);
 }
 
-static inline void gic_write_pmr(u32 val)
+static __always_inline void gic_write_pmr(u32 val)
 {
 	write_sysreg_s(val, SYS_ICC_PMR_EL1);
 }
diff --git a/arch/arm64/include/asm/arch_timer.h b/arch/arm64/include/asm/arch_timer.h
index 7ae54d7d333a..9f0ec21d6327 100644
--- a/arch/arm64/include/asm/arch_timer.h
+++ b/arch/arm64/include/asm/arch_timer.h
@@ -58,6 +58,7 @@ struct arch_timer_erratum_workaround {
 	u64 (*read_cntvct_el0)(void);
 	int (*set_next_event_phys)(unsigned long, struct clock_event_device *);
 	int (*set_next_event_virt)(unsigned long, struct clock_event_device *);
+	bool disable_compat_vdso;
 };
 
 DECLARE_PER_CPU(const struct arch_timer_erratum_workaround *,
diff --git a/arch/arm64/include/asm/atomic.h b/arch/arm64/include/asm/atomic.h
index a08890da696c..015ddffaf6ca 100644
--- a/arch/arm64/include/asm/atomic.h
+++ b/arch/arm64/include/asm/atomic.h
@@ -99,8 +99,6 @@ static inline long arch_atomic64_dec_if_positive(atomic64_t *v)
 	return __lse_ll_sc_body(atomic64_dec_if_positive, v);
 }
 
-#define ATOMIC_INIT(i)	{ (i) }
-
 #define arch_atomic_read(v)			__READ_ONCE((v)->counter)
 #define arch_atomic_set(v, i)			__WRITE_ONCE(((v)->counter), (i))
 
diff --git a/arch/arm64/include/asm/checksum.h b/arch/arm64/include/asm/checksum.h
index b6f7bc6da5fb..93a161b3bf3f 100644
--- a/arch/arm64/include/asm/checksum.h
+++ b/arch/arm64/include/asm/checksum.h
@@ -24,16 +24,17 @@ static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
 {
 	__uint128_t tmp;
 	u64 sum;
+	int n = ihl; /* we want it signed */
 
 	tmp = *(const __uint128_t *)iph;
 	iph += 16;
-	ihl -= 4;
+	n -= 4;
 	tmp += ((tmp >> 64) | (tmp << 64));
 	sum = tmp >> 64;
 	do {
 		sum += *(const u32 *)iph;
 		iph += 4;
-	} while (--ihl);
+	} while (--n > 0);
 
 	sum += ((sum >> 32) | (sum << 32));
 	return csum_fold((__force u32)(sum >> 32));
diff --git a/arch/arm64/include/asm/cpucaps.h b/arch/arm64/include/asm/cpucaps.h
index d7b3bb0cb180..07b643a70710 100644
--- a/arch/arm64/include/asm/cpucaps.h
+++ b/arch/arm64/include/asm/cpucaps.h
@@ -62,7 +62,9 @@
 #define ARM64_HAS_GENERIC_AUTH			52
 #define ARM64_HAS_32BIT_EL1			53
 #define ARM64_BTI				54
+#define ARM64_HAS_ARMv8_4_TTL			55
+#define ARM64_HAS_TLB_RANGE			56
 
-#define ARM64_NCAPS				55
+#define ARM64_NCAPS				57
 
 #endif /* __ASM_CPUCAPS_H */
diff --git a/arch/arm64/include/asm/cpufeature.h b/arch/arm64/include/asm/cpufeature.h
index 5d1f4ae42799..89b4f0142c28 100644
--- a/arch/arm64/include/asm/cpufeature.h
+++ b/arch/arm64/include/asm/cpufeature.h
@@ -675,7 +675,7 @@ static inline bool system_supports_generic_auth(void)
 		cpus_have_const_cap(ARM64_HAS_GENERIC_AUTH);
 }
 
-static inline bool system_uses_irq_prio_masking(void)
+static __always_inline bool system_uses_irq_prio_masking(void)
 {
 	return IS_ENABLED(CONFIG_ARM64_PSEUDO_NMI) &&
 	       cpus_have_const_cap(ARM64_HAS_IRQ_PRIO_MASKING);
@@ -692,6 +692,12 @@ static inline bool system_supports_bti(void)
 	return IS_ENABLED(CONFIG_ARM64_BTI) && cpus_have_const_cap(ARM64_BTI);
 }
 
+static inline bool system_supports_tlb_range(void)
+{
+	return IS_ENABLED(CONFIG_ARM64_TLB_RANGE) &&
+		cpus_have_const_cap(ARM64_HAS_TLB_RANGE);
+}
+
 #define ARM64_BP_HARDEN_UNKNOWN		-1
 #define ARM64_BP_HARDEN_WA_NEEDED	0
 #define ARM64_BP_HARDEN_NOT_REQUIRED	1
@@ -774,6 +780,7 @@ static inline unsigned int get_vmid_bits(u64 mmfr1)
 }
 
 u32 get_kvm_ipa_limit(void);
+void dump_cpu_features(void);
 
 #endif /* __ASSEMBLY__ */
 
diff --git a/arch/arm64/include/asm/cputype.h b/arch/arm64/include/asm/cputype.h
index a87a93f67671..7219cddeba66 100644
--- a/arch/arm64/include/asm/cputype.h
+++ b/arch/arm64/include/asm/cputype.h
@@ -86,6 +86,7 @@
 #define QCOM_CPU_PART_FALKOR		0xC00
 #define QCOM_CPU_PART_KRYO		0x200
 #define QCOM_CPU_PART_KRYO_3XX_SILVER	0x803
+#define QCOM_CPU_PART_KRYO_4XX_GOLD	0x804
 #define QCOM_CPU_PART_KRYO_4XX_SILVER	0x805
 
 #define NVIDIA_CPU_PART_DENVER		0x003
@@ -114,6 +115,7 @@
 #define MIDR_QCOM_FALKOR MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_FALKOR)
 #define MIDR_QCOM_KRYO MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_KRYO)
 #define MIDR_QCOM_KRYO_3XX_SILVER MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_KRYO_3XX_SILVER)
+#define MIDR_QCOM_KRYO_4XX_GOLD MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_KRYO_4XX_GOLD)
 #define MIDR_QCOM_KRYO_4XX_SILVER MIDR_CPU_MODEL(ARM_CPU_IMP_QCOM, QCOM_CPU_PART_KRYO_4XX_SILVER)
 #define MIDR_NVIDIA_DENVER MIDR_CPU_MODEL(ARM_CPU_IMP_NVIDIA, NVIDIA_CPU_PART_DENVER)
 #define MIDR_NVIDIA_CARMEL MIDR_CPU_MODEL(ARM_CPU_IMP_NVIDIA, NVIDIA_CPU_PART_CARMEL)
diff --git a/arch/arm64/include/asm/debug-monitors.h b/arch/arm64/include/asm/debug-monitors.h
index e5ceea213e39..0b298f48f5bf 100644
--- a/arch/arm64/include/asm/debug-monitors.h
+++ b/arch/arm64/include/asm/debug-monitors.h
@@ -109,6 +109,8 @@ void disable_debug_monitors(enum dbg_active_el el);
 
 void user_rewind_single_step(struct task_struct *task);
 void user_fastforward_single_step(struct task_struct *task);
+void user_regs_reset_single_step(struct user_pt_regs *regs,
+				 struct task_struct *task);
 
 void kernel_enable_single_step(struct pt_regs *regs);
 void kernel_disable_single_step(void);
diff --git a/arch/arm64/include/asm/hugetlb.h b/arch/arm64/include/asm/hugetlb.h
index 94ba0c5bced2..5abf91e3494c 100644
--- a/arch/arm64/include/asm/hugetlb.h
+++ b/arch/arm64/include/asm/hugetlb.h
@@ -49,6 +49,8 @@ extern void set_huge_swap_pte_at(struct mm_struct *mm, unsigned long addr,
 				 pte_t *ptep, pte_t pte, unsigned long sz);
 #define set_huge_swap_pte_at set_huge_swap_pte_at
 
+void __init arm64_hugetlb_cma_reserve(void);
+
 #include <asm-generic/hugetlb.h>
 
 #endif /* __ASM_HUGETLB_H */
diff --git a/arch/arm64/include/asm/hwcap.h b/arch/arm64/include/asm/hwcap.h
index d683bcbf1e7c..22f73fe09030 100644
--- a/arch/arm64/include/asm/hwcap.h
+++ b/arch/arm64/include/asm/hwcap.h
@@ -95,6 +95,7 @@
 #define KERNEL_HWCAP_DGH		__khwcap2_feature(DGH)
 #define KERNEL_HWCAP_RNG		__khwcap2_feature(RNG)
 #define KERNEL_HWCAP_BTI		__khwcap2_feature(BTI)
+/* reserved for KERNEL_HWCAP_MTE	__khwcap2_feature(MTE) */
 
 /*
  * This yields a mask that user programs can use to figure out what
diff --git a/arch/arm64/include/asm/kernel-pgtable.h b/arch/arm64/include/asm/kernel-pgtable.h
index 3bf626f6fe0c..329fb15f6bac 100644
--- a/arch/arm64/include/asm/kernel-pgtable.h
+++ b/arch/arm64/include/asm/kernel-pgtable.h
@@ -8,7 +8,7 @@
 #ifndef __ASM_KERNEL_PGTABLE_H
 #define __ASM_KERNEL_PGTABLE_H
 
-#include <linux/pgtable.h>
+#include <asm/pgtable-hwdef.h>
 #include <asm/sparsemem.h>
 
 /*
diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
index c3e6fcc664b1..e21d4a01372f 100644
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -380,9 +380,14 @@ struct kvm_vcpu_arch {
 #define vcpu_has_sve(vcpu) (system_supports_sve() && \
 			    ((vcpu)->arch.flags & KVM_ARM64_GUEST_HAS_SVE))
 
-#define vcpu_has_ptrauth(vcpu)	((system_supports_address_auth() || \
-				  system_supports_generic_auth()) && \
-				 ((vcpu)->arch.flags & KVM_ARM64_GUEST_HAS_PTRAUTH))
+#ifdef CONFIG_ARM64_PTR_AUTH
+#define vcpu_has_ptrauth(vcpu)						\
+	((cpus_have_final_cap(ARM64_HAS_ADDRESS_AUTH) ||		\
+	  cpus_have_final_cap(ARM64_HAS_GENERIC_AUTH)) &&		\
+	 (vcpu)->arch.flags & KVM_ARM64_GUEST_HAS_PTRAUTH)
+#else
+#define vcpu_has_ptrauth(vcpu)		false
+#endif
 
 #define vcpu_gp_regs(v)		(&(v)->arch.ctxt.gp_regs)
 
diff --git a/arch/arm64/include/asm/linkage.h b/arch/arm64/include/asm/linkage.h
index 81fefd2a1d02..ba89a9af820a 100644
--- a/arch/arm64/include/asm/linkage.h
+++ b/arch/arm64/include/asm/linkage.h
@@ -12,7 +12,6 @@
  * instead.
  */
 #define BTI_C hint 34 ;
-#define BTI_J hint 36 ;
 
 /*
  * When using in-kernel BTI we need to ensure that PCS-conformant assembly
@@ -43,11 +42,6 @@
 	SYM_START(name, SYM_L_WEAK, SYM_A_NONE)		\
 	BTI_C
 
-#define SYM_INNER_LABEL(name, linkage)			\
-	.type name SYM_T_NONE ASM_NL			\
-	SYM_ENTRY(name, linkage, SYM_A_NONE)		\
-	BTI_J
-
 #endif
 
 /*
diff --git a/arch/arm64/include/asm/memory.h b/arch/arm64/include/asm/memory.h
index a1871bb32bb1..afa722504bfd 100644
--- a/arch/arm64/include/asm/memory.h
+++ b/arch/arm64/include/asm/memory.h
@@ -10,11 +10,8 @@
 #ifndef __ASM_MEMORY_H
 #define __ASM_MEMORY_H
 
-#include <linux/compiler.h>
 #include <linux/const.h>
 #include <linux/sizes.h>
-#include <linux/types.h>
-#include <asm/bug.h>
 #include <asm/page-def.h>
 
 /*
@@ -157,11 +154,15 @@
 #endif
 
 #ifndef __ASSEMBLY__
-extern u64			vabits_actual;
-#define PAGE_END		(_PAGE_END(vabits_actual))
 
 #include <linux/bitops.h>
+#include <linux/compiler.h>
 #include <linux/mmdebug.h>
+#include <linux/types.h>
+#include <asm/bug.h>
+
+extern u64			vabits_actual;
+#define PAGE_END		(_PAGE_END(vabits_actual))
 
 extern s64			physvirt_offset;
 extern s64			memstart_addr;
@@ -322,6 +323,7 @@ static inline void *phys_to_virt(phys_addr_t x)
 	__is_lm_address(__addr) && pfn_valid(virt_to_pfn(__addr));	\
 })
 
+void dump_mem_limit(void);
 #endif /* !ASSEMBLY */
 
 /*
diff --git a/arch/arm64/include/asm/mmu.h b/arch/arm64/include/asm/mmu.h
index 68140fdd89d6..8444df000181 100644
--- a/arch/arm64/include/asm/mmu.h
+++ b/arch/arm64/include/asm/mmu.h
@@ -19,6 +19,9 @@
 
 typedef struct {
 	atomic64_t	id;
+#ifdef CONFIG_COMPAT
+	void		*sigpage;
+#endif
 	void		*vdso;
 	unsigned long	flags;
 } mm_context_t;
diff --git a/arch/arm64/include/asm/mmu_context.h b/arch/arm64/include/asm/mmu_context.h
index b0bd9b55594c..f2d7537d6f83 100644
--- a/arch/arm64/include/asm/mmu_context.h
+++ b/arch/arm64/include/asm/mmu_context.h
@@ -175,7 +175,7 @@ static inline void cpu_replace_ttbr1(pgd_t *pgdp)
  * take CPU migration into account.
  */
 #define destroy_context(mm)		do { } while(0)
-void check_and_switch_context(struct mm_struct *mm, unsigned int cpu);
+void check_and_switch_context(struct mm_struct *mm);
 
 #define init_new_context(tsk,mm)	({ atomic64_set(&(mm)->context.id, 0); 0; })
 
@@ -214,8 +214,6 @@ enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
 
 static inline void __switch_mm(struct mm_struct *next)
 {
-	unsigned int cpu = smp_processor_id();
-
 	/*
 	 * init_mm.pgd does not contain any user mappings and it is always
 	 * active for kernel addresses in TTBR1. Just set the reserved TTBR0.
@@ -225,7 +223,7 @@ static inline void __switch_mm(struct mm_struct *next)
 		return;
 	}
 
-	check_and_switch_context(next, cpu);
+	check_and_switch_context(next);
 }
 
 static inline void
diff --git a/arch/arm64/include/asm/perf_event.h b/arch/arm64/include/asm/perf_event.h
index e7765b62c712..2c2d7dbe8a02 100644
--- a/arch/arm64/include/asm/perf_event.h
+++ b/arch/arm64/include/asm/perf_event.h
@@ -72,6 +72,13 @@
 #define ARMV8_PMUV3_PERFCTR_LL_CACHE_RD				0x36
 #define ARMV8_PMUV3_PERFCTR_LL_CACHE_MISS_RD			0x37
 #define ARMV8_PMUV3_PERFCTR_REMOTE_ACCESS_RD			0x38
+#define ARMV8_PMUV3_PERFCTR_L1D_CACHE_LMISS_RD			0x39
+#define ARMV8_PMUV3_PERFCTR_OP_RETIRED				0x3A
+#define ARMV8_PMUV3_PERFCTR_OP_SPEC				0x3B
+#define ARMV8_PMUV3_PERFCTR_STALL				0x3C
+#define ARMV8_PMUV3_PERFCTR_STALL_SLOT_BACKEND			0x3D
+#define ARMV8_PMUV3_PERFCTR_STALL_SLOT_FRONTEND			0x3E
+#define ARMV8_PMUV3_PERFCTR_STALL_SLOT				0x3F
 
 /* Statistical profiling extension microarchitectural events */
 #define	ARMV8_SPE_PERFCTR_SAMPLE_POP				0x4000
@@ -79,6 +86,26 @@
 #define	ARMV8_SPE_PERFCTR_SAMPLE_FILTRATE			0x4002
 #define	ARMV8_SPE_PERFCTR_SAMPLE_COLLISION			0x4003
 
+/* AMUv1 architecture events */
+#define	ARMV8_AMU_PERFCTR_CNT_CYCLES				0x4004
+#define	ARMV8_AMU_PERFCTR_STALL_BACKEND_MEM			0x4005
+
+/* long-latency read miss events */
+#define	ARMV8_PMUV3_PERFCTR_L1I_CACHE_LMISS			0x4006
+#define	ARMV8_PMUV3_PERFCTR_L2D_CACHE_LMISS_RD			0x4009
+#define	ARMV8_PMUV3_PERFCTR_L2I_CACHE_LMISS			0x400A
+#define	ARMV8_PMUV3_PERFCTR_L3D_CACHE_LMISS_RD			0x400B
+
+/* additional latency from alignment events */
+#define	ARMV8_PMUV3_PERFCTR_LDST_ALIGN_LAT			0x4020
+#define	ARMV8_PMUV3_PERFCTR_LD_ALIGN_LAT			0x4021
+#define	ARMV8_PMUV3_PERFCTR_ST_ALIGN_LAT			0x4022
+
+/* Armv8.5 Memory Tagging Extension events */
+#define	ARMV8_MTE_PERFCTR_MEM_ACCESS_CHECKED			0x4024
+#define	ARMV8_MTE_PERFCTR_MEM_ACCESS_CHECKED_RD			0x4025
+#define	ARMV8_MTE_PERFCTR_MEM_ACCESS_CHECKED_WR			0x4026
+
 /* ARMv8 recommended implementation defined event types */
 #define ARMV8_IMPDEF_PERFCTR_L1D_CACHE_RD			0x40
 #define ARMV8_IMPDEF_PERFCTR_L1D_CACHE_WR			0x41
diff --git a/arch/arm64/include/asm/pgtable-hwdef.h b/arch/arm64/include/asm/pgtable-hwdef.h
index 9c91a8f93a0e..d400a4d9aee2 100644
--- a/arch/arm64/include/asm/pgtable-hwdef.h
+++ b/arch/arm64/include/asm/pgtable-hwdef.h
@@ -29,7 +29,7 @@
  * Size mapped by an entry at level n ( 0 <= n <= 3)
  * We map (PAGE_SHIFT - 3) at all translation levels and PAGE_SHIFT bits
  * in the final page. The maximum number of translation levels supported by
- * the architecture is 4. Hence, starting at at level n, we have further
+ * the architecture is 4. Hence, starting at level n, we have further
  * ((4 - n) - 1) levels of translation excluding the offset within the page.
  * So, the total number of bits mapped by an entry at level n is :
  *
@@ -82,23 +82,23 @@
  * Contiguous page definitions.
  */
 #ifdef CONFIG_ARM64_64K_PAGES
-#define CONT_PTE_SHIFT		5
-#define CONT_PMD_SHIFT		5
+#define CONT_PTE_SHIFT		(5 + PAGE_SHIFT)
+#define CONT_PMD_SHIFT		(5 + PMD_SHIFT)
 #elif defined(CONFIG_ARM64_16K_PAGES)
-#define CONT_PTE_SHIFT		7
-#define CONT_PMD_SHIFT		5
+#define CONT_PTE_SHIFT		(7 + PAGE_SHIFT)
+#define CONT_PMD_SHIFT		(5 + PMD_SHIFT)
 #else
-#define CONT_PTE_SHIFT		4
-#define CONT_PMD_SHIFT		4
+#define CONT_PTE_SHIFT		(4 + PAGE_SHIFT)
+#define CONT_PMD_SHIFT		(4 + PMD_SHIFT)
 #endif
 
-#define CONT_PTES		(1 << CONT_PTE_SHIFT)
+#define CONT_PTES		(1 << (CONT_PTE_SHIFT - PAGE_SHIFT))
 #define CONT_PTE_SIZE		(CONT_PTES * PAGE_SIZE)
 #define CONT_PTE_MASK		(~(CONT_PTE_SIZE - 1))
-#define CONT_PMDS		(1 << CONT_PMD_SHIFT)
+#define CONT_PMDS		(1 << (CONT_PMD_SHIFT - PMD_SHIFT))
 #define CONT_PMD_SIZE		(CONT_PMDS * PMD_SIZE)
 #define CONT_PMD_MASK		(~(CONT_PMD_SIZE - 1))
-/* the the numerical offset of the PTE within a range of CONT_PTES */
+/* the numerical offset of the PTE within a range of CONT_PTES */
 #define CONT_RANGE_OFFSET(addr) (((addr)>>PAGE_SHIFT)&(CONT_PTES-1))
 
 /*
@@ -178,10 +178,12 @@
 #define PTE_S2_RDONLY		(_AT(pteval_t, 1) << 6)   /* HAP[2:1] */
 #define PTE_S2_RDWR		(_AT(pteval_t, 3) << 6)   /* HAP[2:1] */
 #define PTE_S2_XN		(_AT(pteval_t, 2) << 53)  /* XN[1:0] */
+#define PTE_S2_SW_RESVD		(_AT(pteval_t, 15) << 55) /* Reserved for SW */
 
 #define PMD_S2_RDONLY		(_AT(pmdval_t, 1) << 6)   /* HAP[2:1] */
 #define PMD_S2_RDWR		(_AT(pmdval_t, 3) << 6)   /* HAP[2:1] */
 #define PMD_S2_XN		(_AT(pmdval_t, 2) << 53)  /* XN[1:0] */
+#define PMD_S2_SW_RESVD		(_AT(pmdval_t, 15) << 55) /* Reserved for SW */
 
 #define PUD_S2_RDONLY		(_AT(pudval_t, 1) << 6)   /* HAP[2:1] */
 #define PUD_S2_RDWR		(_AT(pudval_t, 3) << 6)   /* HAP[2:1] */
@@ -216,6 +218,7 @@
 #define TCR_TxSZ(x)		(TCR_T0SZ(x) | TCR_T1SZ(x))
 #define TCR_TxSZ_WIDTH		6
 #define TCR_T0SZ_MASK		(((UL(1) << TCR_TxSZ_WIDTH) - 1) << TCR_T0SZ_OFFSET)
+#define TCR_T1SZ_MASK		(((UL(1) << TCR_TxSZ_WIDTH) - 1) << TCR_T1SZ_OFFSET)
 
 #define TCR_EPD0_SHIFT		7
 #define TCR_EPD0_MASK		(UL(1) << TCR_EPD0_SHIFT)
diff --git a/arch/arm64/include/asm/pgtable-prot.h b/arch/arm64/include/asm/pgtable-prot.h
index 2e7e0f452301..4d867c6446c4 100644
--- a/arch/arm64/include/asm/pgtable-prot.h
+++ b/arch/arm64/include/asm/pgtable-prot.h
@@ -67,7 +67,7 @@ extern bool arm64_use_ng_mappings;
 #define PAGE_HYP		__pgprot(_HYP_PAGE_DEFAULT | PTE_HYP | PTE_HYP_XN)
 #define PAGE_HYP_EXEC		__pgprot(_HYP_PAGE_DEFAULT | PTE_HYP | PTE_RDONLY)
 #define PAGE_HYP_RO		__pgprot(_HYP_PAGE_DEFAULT | PTE_HYP | PTE_RDONLY | PTE_HYP_XN)
-#define PAGE_HYP_DEVICE		__pgprot(PROT_DEVICE_nGnRE | PTE_HYP)
+#define PAGE_HYP_DEVICE		__pgprot(_PROT_DEFAULT | PTE_ATTRINDX(MT_DEVICE_nGnRE) | PTE_HYP | PTE_HYP_XN)
 
 #define PAGE_S2_MEMATTR(attr)						\
 	({								\
diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h
index 6dbd267ab931..d5d3fbe73953 100644
--- a/arch/arm64/include/asm/pgtable.h
+++ b/arch/arm64/include/asm/pgtable.h
@@ -40,6 +40,16 @@ extern void __pmd_error(const char *file, int line, unsigned long val);
 extern void __pud_error(const char *file, int line, unsigned long val);
 extern void __pgd_error(const char *file, int line, unsigned long val);
 
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+#define __HAVE_ARCH_FLUSH_PMD_TLB_RANGE
+
+/* Set stride and tlb_level in flush_*_tlb_range */
+#define flush_pmd_tlb_range(vma, addr, end)	\
+	__flush_tlb_range(vma, addr, end, PMD_SIZE, false, 2)
+#define flush_pud_tlb_range(vma, addr, end)	\
+	__flush_tlb_range(vma, addr, end, PUD_SIZE, false, 1)
+#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
+
 /*
  * ZERO_PAGE is a global shared page that is always zero: used
  * for zero-mapped memory areas etc..
@@ -416,7 +426,7 @@ static inline pmd_t pmd_mkdevmap(pmd_t pmd)
 	__pgprot((pgprot_val(prot) & ~(mask)) | (bits))
 
 #define pgprot_nx(prot) \
-	__pgprot_modify(prot, 0, PTE_PXN)
+	__pgprot_modify(prot, PTE_MAYBE_GP, PTE_PXN)
 
 /*
  * Mark the prot value as uncacheable and unbufferable.
diff --git a/arch/arm64/include/asm/ptrace.h b/arch/arm64/include/asm/ptrace.h
index 953b6a1ce549..966ed30ed5f7 100644
--- a/arch/arm64/include/asm/ptrace.h
+++ b/arch/arm64/include/asm/ptrace.h
@@ -27,7 +27,7 @@
  *
  * Some code sections either automatically switch back to PSR.I or explicitly
  * require to not use priority masking. If bit GIC_PRIO_PSR_I_SET is included
- * in the  the priority mask, it indicates that PSR.I should be set and
+ * in the priority mask, it indicates that PSR.I should be set and
  * interrupt disabling temporarily does not rely on IRQ priorities.
  */
 #define GIC_PRIO_IRQON			0xe0
diff --git a/arch/arm64/include/asm/smp.h b/arch/arm64/include/asm/smp.h
index ea268d88b6f7..a0c8a0b65259 100644
--- a/arch/arm64/include/asm/smp.h
+++ b/arch/arm64/include/asm/smp.h
@@ -30,7 +30,6 @@
 #include <linux/threads.h>
 #include <linux/cpumask.h>
 #include <linux/thread_info.h>
-#include <asm/pointer_auth.h>
 
 DECLARE_PER_CPU_READ_MOSTLY(int, cpu_number);
 
diff --git a/arch/arm64/include/asm/stage2_pgtable.h b/arch/arm64/include/asm/stage2_pgtable.h
index b767904f28b1..996bf98f0cab 100644
--- a/arch/arm64/include/asm/stage2_pgtable.h
+++ b/arch/arm64/include/asm/stage2_pgtable.h
@@ -256,4 +256,13 @@ stage2_pgd_addr_end(struct kvm *kvm, phys_addr_t addr, phys_addr_t end)
 	return (boundary - 1 < end - 1) ? boundary : end;
 }
 
+/*
+ * Level values for the ARMv8.4-TTL extension, mapping PUD/PMD/PTE and
+ * the architectural page-table level.
+ */
+#define S2_NO_LEVEL_HINT	0
+#define S2_PUD_LEVEL		1
+#define S2_PMD_LEVEL		2
+#define S2_PTE_LEVEL		3
+
 #endif	/* __ARM64_S2_PGTABLE_H_ */
diff --git a/arch/arm64/include/asm/syscall.h b/arch/arm64/include/asm/syscall.h
index 65299a2dcf9c..cfc0672013f6 100644
--- a/arch/arm64/include/asm/syscall.h
+++ b/arch/arm64/include/asm/syscall.h
@@ -34,6 +34,10 @@ static inline long syscall_get_error(struct task_struct *task,
 				     struct pt_regs *regs)
 {
 	unsigned long error = regs->regs[0];
+
+	if (is_compat_thread(task_thread_info(task)))
+		error = sign_extend64(error, 31);
+
 	return IS_ERR_VALUE(error) ? error : 0;
 }
 
@@ -47,7 +51,13 @@ static inline void syscall_set_return_value(struct task_struct *task,
 					    struct pt_regs *regs,
 					    int error, long val)
 {
-	regs->regs[0] = (long) error ? error : val;
+	if (error)
+		val = error;
+
+	if (is_compat_thread(task_thread_info(task)))
+		val = lower_32_bits(val);
+
+	regs->regs[0] = val;
 }
 
 #define SYSCALL_MAX_ARGS 6
diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
index 463175f80341..554a7e8ecb07 100644
--- a/arch/arm64/include/asm/sysreg.h
+++ b/arch/arm64/include/asm/sysreg.h
@@ -421,9 +421,9 @@
  */
 
 #define SYS_AMEVCNTR0_EL0(n)		SYS_AM_EL0(4 + ((n) >> 3), (n) & 7)
-#define SYS_AMEVTYPE0_EL0(n)		SYS_AM_EL0(6 + ((n) >> 3), (n) & 7)
+#define SYS_AMEVTYPER0_EL0(n)		SYS_AM_EL0(6 + ((n) >> 3), (n) & 7)
 #define SYS_AMEVCNTR1_EL0(n)		SYS_AM_EL0(12 + ((n) >> 3), (n) & 7)
-#define SYS_AMEVTYPE1_EL0(n)		SYS_AM_EL0(14 + ((n) >> 3), (n) & 7)
+#define SYS_AMEVTYPER1_EL0(n)		SYS_AM_EL0(14 + ((n) >> 3), (n) & 7)
 
 /* AMU v1: Fixed (architecturally defined) activity monitors */
 #define SYS_AMEVCNTR0_CORE_EL0		SYS_AMEVCNTR0_EL0(0)
@@ -617,6 +617,9 @@
 #define ID_AA64ISAR0_SHA1_SHIFT		8
 #define ID_AA64ISAR0_AES_SHIFT		4
 
+#define ID_AA64ISAR0_TLB_RANGE_NI	0x0
+#define ID_AA64ISAR0_TLB_RANGE		0x2
+
 /* id_aa64isar1 */
 #define ID_AA64ISAR1_I8MM_SHIFT		52
 #define ID_AA64ISAR1_DGH_SHIFT		48
@@ -706,6 +709,9 @@
 #define ID_AA64ZFR0_SVEVER_SVE2		0x1
 
 /* id_aa64mmfr0 */
+#define ID_AA64MMFR0_ECV_SHIFT		60
+#define ID_AA64MMFR0_FGT_SHIFT		56
+#define ID_AA64MMFR0_EXS_SHIFT		44
 #define ID_AA64MMFR0_TGRAN4_2_SHIFT	40
 #define ID_AA64MMFR0_TGRAN64_2_SHIFT	36
 #define ID_AA64MMFR0_TGRAN16_2_SHIFT	32
@@ -734,6 +740,10 @@
 #endif
 
 /* id_aa64mmfr1 */
+#define ID_AA64MMFR1_ETS_SHIFT		36
+#define ID_AA64MMFR1_TWED_SHIFT		32
+#define ID_AA64MMFR1_XNX_SHIFT		28
+#define ID_AA64MMFR1_SPECSEI_SHIFT	24
 #define ID_AA64MMFR1_PAN_SHIFT		20
 #define ID_AA64MMFR1_LOR_SHIFT		16
 #define ID_AA64MMFR1_HPD_SHIFT		12
@@ -746,8 +756,15 @@
 
 /* id_aa64mmfr2 */
 #define ID_AA64MMFR2_E0PD_SHIFT		60
+#define ID_AA64MMFR2_EVT_SHIFT		56
+#define ID_AA64MMFR2_BBM_SHIFT		52
+#define ID_AA64MMFR2_TTL_SHIFT		48
 #define ID_AA64MMFR2_FWB_SHIFT		40
+#define ID_AA64MMFR2_IDS_SHIFT		36
 #define ID_AA64MMFR2_AT_SHIFT		32
+#define ID_AA64MMFR2_ST_SHIFT		28
+#define ID_AA64MMFR2_NV_SHIFT		24
+#define ID_AA64MMFR2_CCIDX_SHIFT	20
 #define ID_AA64MMFR2_LVA_SHIFT		16
 #define ID_AA64MMFR2_IESB_SHIFT		12
 #define ID_AA64MMFR2_LSM_SHIFT		8
@@ -755,6 +772,7 @@
 #define ID_AA64MMFR2_CNP_SHIFT		0
 
 /* id_aa64dfr0 */
+#define ID_AA64DFR0_DOUBLELOCK_SHIFT	36
 #define ID_AA64DFR0_PMSVER_SHIFT	32
 #define ID_AA64DFR0_CTX_CMPS_SHIFT	28
 #define ID_AA64DFR0_WRPS_SHIFT		20
@@ -807,18 +825,40 @@
 #define ID_ISAR6_DP_SHIFT		4
 #define ID_ISAR6_JSCVT_SHIFT		0
 
+#define ID_MMFR0_INNERSHR_SHIFT		28
+#define ID_MMFR0_FCSE_SHIFT		24
+#define ID_MMFR0_AUXREG_SHIFT		20
+#define ID_MMFR0_TCM_SHIFT		16
+#define ID_MMFR0_SHARELVL_SHIFT		12
+#define ID_MMFR0_OUTERSHR_SHIFT		8
+#define ID_MMFR0_PMSA_SHIFT		4
+#define ID_MMFR0_VMSA_SHIFT		0
+
 #define ID_MMFR4_EVT_SHIFT		28
 #define ID_MMFR4_CCIDX_SHIFT		24
 #define ID_MMFR4_LSM_SHIFT		20
 #define ID_MMFR4_HPDS_SHIFT		16
 #define ID_MMFR4_CNP_SHIFT		12
 #define ID_MMFR4_XNX_SHIFT		8
+#define ID_MMFR4_AC2_SHIFT		4
 #define ID_MMFR4_SPECSEI_SHIFT		0
 
 #define ID_MMFR5_ETS_SHIFT		0
 
 #define ID_PFR0_DIT_SHIFT		24
 #define ID_PFR0_CSV2_SHIFT		16
+#define ID_PFR0_STATE3_SHIFT		12
+#define ID_PFR0_STATE2_SHIFT		8
+#define ID_PFR0_STATE1_SHIFT		4
+#define ID_PFR0_STATE0_SHIFT		0
+
+#define ID_DFR0_PERFMON_SHIFT		24
+#define ID_DFR0_MPROFDBG_SHIFT		20
+#define ID_DFR0_MMAPTRC_SHIFT		16
+#define ID_DFR0_COPTRC_SHIFT		12
+#define ID_DFR0_MMAPDBG_SHIFT		8
+#define ID_DFR0_COPSDBG_SHIFT		4
+#define ID_DFR0_COPDBG_SHIFT		0
 
 #define ID_PFR2_SSBS_SHIFT		4
 #define ID_PFR2_CSV3_SHIFT		0
@@ -861,6 +901,11 @@
 #define ID_AA64MMFR0_TGRAN_SUPPORTED	ID_AA64MMFR0_TGRAN64_SUPPORTED
 #endif
 
+#define MVFR2_FPMISC_SHIFT		4
+#define MVFR2_SIMDMISC_SHIFT		0
+
+#define DCZID_DZP_SHIFT			4
+#define DCZID_BS_SHIFT			0
 
 /*
  * The ZCR_ELx_LEN_* definitions intentionally include bits [8:4] which
diff --git a/arch/arm64/include/asm/thread_info.h b/arch/arm64/include/asm/thread_info.h
index 6ea8b6a26ae9..5e784e16ee89 100644
--- a/arch/arm64/include/asm/thread_info.h
+++ b/arch/arm64/include/asm/thread_info.h
@@ -93,6 +93,7 @@ void arch_release_task_struct(struct task_struct *tsk);
 #define _TIF_SYSCALL_EMU	(1 << TIF_SYSCALL_EMU)
 #define _TIF_UPROBE		(1 << TIF_UPROBE)
 #define _TIF_FSCHECK		(1 << TIF_FSCHECK)
+#define _TIF_SINGLESTEP		(1 << TIF_SINGLESTEP)
 #define _TIF_32BIT		(1 << TIF_32BIT)
 #define _TIF_SVE		(1 << TIF_SVE)
 
diff --git a/arch/arm64/include/asm/tlb.h b/arch/arm64/include/asm/tlb.h
index b76df828e6b7..61c97d3b58c7 100644
--- a/arch/arm64/include/asm/tlb.h
+++ b/arch/arm64/include/asm/tlb.h
@@ -21,11 +21,37 @@ static void tlb_flush(struct mmu_gather *tlb);
 
 #include <asm-generic/tlb.h>
 
+/*
+ * get the tlbi levels in arm64.  Default value is 0 if more than one
+ * of cleared_* is set or neither is set.
+ * Arm64 doesn't support p4ds now.
+ */
+static inline int tlb_get_level(struct mmu_gather *tlb)
+{
+	if (tlb->cleared_ptes && !(tlb->cleared_pmds ||
+				   tlb->cleared_puds ||
+				   tlb->cleared_p4ds))
+		return 3;
+
+	if (tlb->cleared_pmds && !(tlb->cleared_ptes ||
+				   tlb->cleared_puds ||
+				   tlb->cleared_p4ds))
+		return 2;
+
+	if (tlb->cleared_puds && !(tlb->cleared_ptes ||
+				   tlb->cleared_pmds ||
+				   tlb->cleared_p4ds))
+		return 1;
+
+	return 0;
+}
+
 static inline void tlb_flush(struct mmu_gather *tlb)
 {
 	struct vm_area_struct vma = TLB_FLUSH_VMA(tlb->mm, 0);
 	bool last_level = !tlb->freed_tables;
 	unsigned long stride = tlb_get_unmap_size(tlb);
+	int tlb_level = tlb_get_level(tlb);
 
 	/*
 	 * If we're tearing down the address space then we only care about
@@ -38,7 +64,8 @@ static inline void tlb_flush(struct mmu_gather *tlb)
 		return;
 	}
 
-	__flush_tlb_range(&vma, tlb->start, tlb->end, stride, last_level);
+	__flush_tlb_range(&vma, tlb->start, tlb->end, stride,
+			  last_level, tlb_level);
 }
 
 static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte,
diff --git a/arch/arm64/include/asm/tlbflush.h b/arch/arm64/include/asm/tlbflush.h
index bc3949064725..d493174415db 100644
--- a/arch/arm64/include/asm/tlbflush.h
+++ b/arch/arm64/include/asm/tlbflush.h
@@ -10,6 +10,7 @@
 
 #ifndef __ASSEMBLY__
 
+#include <linux/bitfield.h>
 #include <linux/mm_types.h>
 #include <linux/sched.h>
 #include <asm/cputype.h>
@@ -60,6 +61,102 @@
 	})
 
 /*
+ * Get translation granule of the system, which is decided by
+ * PAGE_SIZE.  Used by TTL.
+ *  - 4KB	: 1
+ *  - 16KB	: 2
+ *  - 64KB	: 3
+ */
+#define TLBI_TTL_TG_4K		1
+#define TLBI_TTL_TG_16K		2
+#define TLBI_TTL_TG_64K		3
+
+static inline unsigned long get_trans_granule(void)
+{
+	switch (PAGE_SIZE) {
+	case SZ_4K:
+		return TLBI_TTL_TG_4K;
+	case SZ_16K:
+		return TLBI_TTL_TG_16K;
+	case SZ_64K:
+		return TLBI_TTL_TG_64K;
+	default:
+		return 0;
+	}
+}
+
+/*
+ * Level-based TLBI operations.
+ *
+ * When ARMv8.4-TTL exists, TLBI operations take an additional hint for
+ * the level at which the invalidation must take place. If the level is
+ * wrong, no invalidation may take place. In the case where the level
+ * cannot be easily determined, a 0 value for the level parameter will
+ * perform a non-hinted invalidation.
+ *
+ * For Stage-2 invalidation, use the level values provided to that effect
+ * in asm/stage2_pgtable.h.
+ */
+#define TLBI_TTL_MASK		GENMASK_ULL(47, 44)
+
+#define __tlbi_level(op, addr, level) do {				\
+	u64 arg = addr;							\
+									\
+	if (cpus_have_const_cap(ARM64_HAS_ARMv8_4_TTL) &&		\
+	    level) {							\
+		u64 ttl = level & 3;					\
+		ttl |= get_trans_granule() << 2;			\
+		arg &= ~TLBI_TTL_MASK;					\
+		arg |= FIELD_PREP(TLBI_TTL_MASK, ttl);			\
+	}								\
+									\
+	__tlbi(op, arg);						\
+} while(0)
+
+#define __tlbi_user_level(op, arg, level) do {				\
+	if (arm64_kernel_unmapped_at_el0())				\
+		__tlbi_level(op, (arg | USER_ASID_FLAG), level);	\
+} while (0)
+
+/*
+ * This macro creates a properly formatted VA operand for the TLB RANGE.
+ * The value bit assignments are:
+ *
+ * +----------+------+-------+-------+-------+----------------------+
+ * |   ASID   |  TG  | SCALE |  NUM  |  TTL  |        BADDR         |
+ * +-----------------+-------+-------+-------+----------------------+
+ * |63      48|47  46|45   44|43   39|38   37|36                   0|
+ *
+ * The address range is determined by below formula:
+ * [BADDR, BADDR + (NUM + 1) * 2^(5*SCALE + 1) * PAGESIZE)
+ *
+ */
+#define __TLBI_VADDR_RANGE(addr, asid, scale, num, ttl)		\
+	({							\
+		unsigned long __ta = (addr) >> PAGE_SHIFT;	\
+		__ta &= GENMASK_ULL(36, 0);			\
+		__ta |= (unsigned long)(ttl) << 37;		\
+		__ta |= (unsigned long)(num) << 39;		\
+		__ta |= (unsigned long)(scale) << 44;		\
+		__ta |= get_trans_granule() << 46;		\
+		__ta |= (unsigned long)(asid) << 48;		\
+		__ta;						\
+	})
+
+/* These macros are used by the TLBI RANGE feature. */
+#define __TLBI_RANGE_PAGES(num, scale)	\
+	((unsigned long)((num) + 1) << (5 * (scale) + 1))
+#define MAX_TLBI_RANGE_PAGES		__TLBI_RANGE_PAGES(31, 3)
+
+/*
+ * Generate 'num' values from -1 to 30 with -1 rejected by the
+ * __flush_tlb_range() loop below.
+ */
+#define TLBI_RANGE_MASK			GENMASK_ULL(4, 0)
+#define __TLBI_RANGE_NUM(pages, scale)	\
+	((((pages) >> (5 * (scale) + 1)) & TLBI_RANGE_MASK) - 1)
+
+/*
  *	TLB Invalidation
  *	================
  *
@@ -179,34 +276,83 @@ static inline void flush_tlb_page(struct vm_area_struct *vma,
 
 static inline void __flush_tlb_range(struct vm_area_struct *vma,
 				     unsigned long start, unsigned long end,
-				     unsigned long stride, bool last_level)
+				     unsigned long stride, bool last_level,
+				     int tlb_level)
 {
+	int num = 0;
+	int scale = 0;
 	unsigned long asid = ASID(vma->vm_mm);
 	unsigned long addr;
+	unsigned long pages;
 
 	start = round_down(start, stride);
 	end = round_up(end, stride);
+	pages = (end - start) >> PAGE_SHIFT;
 
-	if ((end - start) >= (MAX_TLBI_OPS * stride)) {
+	/*
+	 * When not uses TLB range ops, we can handle up to
+	 * (MAX_TLBI_OPS - 1) pages;
+	 * When uses TLB range ops, we can handle up to
+	 * (MAX_TLBI_RANGE_PAGES - 1) pages.
+	 */
+	if ((!system_supports_tlb_range() &&
+	     (end - start) >= (MAX_TLBI_OPS * stride)) ||
+	    pages >= MAX_TLBI_RANGE_PAGES) {
 		flush_tlb_mm(vma->vm_mm);
 		return;
 	}
 
-	/* Convert the stride into units of 4k */
-	stride >>= 12;
+	dsb(ishst);
 
-	start = __TLBI_VADDR(start, asid);
-	end = __TLBI_VADDR(end, asid);
+	/*
+	 * When the CPU does not support TLB range operations, flush the TLB
+	 * entries one by one at the granularity of 'stride'. If the the TLB
+	 * range ops are supported, then:
+	 *
+	 * 1. If 'pages' is odd, flush the first page through non-range
+	 *    operations;
+	 *
+	 * 2. For remaining pages: the minimum range granularity is decided
+	 *    by 'scale', so multiple range TLBI operations may be required.
+	 *    Start from scale = 0, flush the corresponding number of pages
+	 *    ((num+1)*2^(5*scale+1) starting from 'addr'), then increase it
+	 *    until no pages left.
+	 *
+	 * Note that certain ranges can be represented by either num = 31 and
+	 * scale or num = 0 and scale + 1. The loop below favours the latter
+	 * since num is limited to 30 by the __TLBI_RANGE_NUM() macro.
+	 */
+	while (pages > 0) {
+		if (!system_supports_tlb_range() ||
+		    pages % 2 == 1) {
+			addr = __TLBI_VADDR(start, asid);
+			if (last_level) {
+				__tlbi_level(vale1is, addr, tlb_level);
+				__tlbi_user_level(vale1is, addr, tlb_level);
+			} else {
+				__tlbi_level(vae1is, addr, tlb_level);
+				__tlbi_user_level(vae1is, addr, tlb_level);
+			}
+			start += stride;
+			pages -= stride >> PAGE_SHIFT;
+			continue;
+		}
 
-	dsb(ishst);
-	for (addr = start; addr < end; addr += stride) {
-		if (last_level) {
-			__tlbi(vale1is, addr);
-			__tlbi_user(vale1is, addr);
-		} else {
-			__tlbi(vae1is, addr);
-			__tlbi_user(vae1is, addr);
+		num = __TLBI_RANGE_NUM(pages, scale);
+		if (num >= 0) {
+			addr = __TLBI_VADDR_RANGE(start, asid, scale,
+						  num, tlb_level);
+			if (last_level) {
+				__tlbi(rvale1is, addr);
+				__tlbi_user(rvale1is, addr);
+			} else {
+				__tlbi(rvae1is, addr);
+				__tlbi_user(rvae1is, addr);
+			}
+			start += __TLBI_RANGE_PAGES(num, scale) << PAGE_SHIFT;
+			pages -= __TLBI_RANGE_PAGES(num, scale);
 		}
+		scale++;
 	}
 	dsb(ish);
 }
@@ -217,8 +363,9 @@ static inline void flush_tlb_range(struct vm_area_struct *vma,
 	/*
 	 * We cannot use leaf-only invalidation here, since we may be invalidating
 	 * table entries as part of collapsing hugepages or moving page tables.
+	 * Set the tlb_level to 0 because we can not get enough information here.
 	 */
-	__flush_tlb_range(vma, start, end, PAGE_SIZE, false);
+	__flush_tlb_range(vma, start, end, PAGE_SIZE, false, 0);
 }
 
 static inline void flush_tlb_kernel_range(unsigned long start, unsigned long end)
diff --git a/arch/arm64/include/asm/topology.h b/arch/arm64/include/asm/topology.h
index 0cc835ddfcd1..e042f6527981 100644
--- a/arch/arm64/include/asm/topology.h
+++ b/arch/arm64/include/asm/topology.h
@@ -34,8 +34,9 @@ void topology_scale_freq_tick(void);
 /* Enable topology flag updates */
 #define arch_update_cpu_topology topology_update_cpu_topology
 
-/* Replace task scheduler's default thermal pressure retrieve API */
+/* Replace task scheduler's default thermal pressure API */
 #define arch_scale_thermal_pressure topology_get_thermal_pressure
+#define arch_set_thermal_pressure   topology_set_thermal_pressure
 
 #include <asm-generic/topology.h>
 
diff --git a/arch/arm64/include/asm/uaccess.h b/arch/arm64/include/asm/uaccess.h
index bc5c7b091152..8d7c466f809b 100644
--- a/arch/arm64/include/asm/uaccess.h
+++ b/arch/arm64/include/asm/uaccess.h
@@ -19,6 +19,7 @@
 #include <linux/string.h>
 
 #include <asm/cpufeature.h>
+#include <asm/mmu.h>
 #include <asm/ptrace.h>
 #include <asm/memory.h>
 #include <asm/extable.h>
diff --git a/arch/arm64/include/asm/unistd32.h b/arch/arm64/include/asm/unistd32.h
index 6d95d0c8bf2f..c760b9e159f5 100644
--- a/arch/arm64/include/asm/unistd32.h
+++ b/arch/arm64/include/asm/unistd32.h
@@ -879,6 +879,8 @@ __SYSCALL(__NR_fspick, sys_fspick)
 __SYSCALL(__NR_pidfd_open, sys_pidfd_open)
 #define __NR_clone3 435
 __SYSCALL(__NR_clone3, sys_clone3)
+#define __NR_close_range 436
+__SYSCALL(__NR_close_range, sys_close_range)
 #define __NR_openat2 437
 __SYSCALL(__NR_openat2, sys_openat2)
 #define __NR_pidfd_getfd 438
diff --git a/arch/arm64/include/asm/vdso.h b/arch/arm64/include/asm/vdso.h
index 07468428fd29..f99dcb94b438 100644
--- a/arch/arm64/include/asm/vdso.h
+++ b/arch/arm64/include/asm/vdso.h
@@ -12,6 +12,8 @@
  */
 #define VDSO_LBASE	0x0
 
+#define __VVAR_PAGES    2
+
 #ifndef __ASSEMBLY__
 
 #include <generated/vdso-offsets.h>
diff --git a/arch/arm64/include/asm/vdso/clocksource.h b/arch/arm64/include/asm/vdso/clocksource.h
index df6ea65c1dec..b054d9febfb5 100644
--- a/arch/arm64/include/asm/vdso/clocksource.h
+++ b/arch/arm64/include/asm/vdso/clocksource.h
@@ -2,7 +2,10 @@
 #ifndef __ASM_VDSOCLOCKSOURCE_H
 #define __ASM_VDSOCLOCKSOURCE_H
 
-#define VDSO_ARCH_CLOCKMODES	\
-	VDSO_CLOCKMODE_ARCHTIMER
+#define VDSO_ARCH_CLOCKMODES					\
+	/* vdso clocksource for both 32 and 64bit tasks */	\
+	VDSO_CLOCKMODE_ARCHTIMER,				\
+	/* vdso clocksource for 64bit tasks only */		\
+	VDSO_CLOCKMODE_ARCHTIMER_NOCOMPAT
 
 #endif
diff --git a/arch/arm64/include/asm/vdso/compat_gettimeofday.h b/arch/arm64/include/asm/vdso/compat_gettimeofday.h
index b6907ae78e53..75cbae60455b 100644
--- a/arch/arm64/include/asm/vdso/compat_gettimeofday.h
+++ b/arch/arm64/include/asm/vdso/compat_gettimeofday.h
@@ -7,6 +7,7 @@
 
 #ifndef __ASSEMBLY__
 
+#include <asm/barrier.h>
 #include <asm/unistd.h>
 #include <asm/errno.h>
 
@@ -111,7 +112,7 @@ static __always_inline u64 __arch_get_hw_counter(s32 clock_mode)
 	 * update. Return something. Core will do another round and then
 	 * see the mode change and fallback to the syscall.
 	 */
-	if (clock_mode == VDSO_CLOCKMODE_NONE)
+	if (clock_mode != VDSO_CLOCKMODE_ARCHTIMER)
 		return 0;
 
 	/*
@@ -152,6 +153,24 @@ static __always_inline const struct vdso_data *__arch_get_vdso_data(void)
 	return ret;
 }
 
+#ifdef CONFIG_TIME_NS
+static __always_inline const struct vdso_data *__arch_get_timens_vdso_data(void)
+{
+	const struct vdso_data *ret;
+
+	/* See __arch_get_vdso_data(). */
+	asm volatile("mov %0, %1" : "=r"(ret) : "r"(_timens_data));
+
+	return ret;
+}
+#endif
+
+static inline bool vdso_clocksource_ok(const struct vdso_data *vd)
+{
+	return vd->clock_mode == VDSO_CLOCKMODE_ARCHTIMER;
+}
+#define vdso_clocksource_ok	vdso_clocksource_ok
+
 #endif /* !__ASSEMBLY__ */
 
 #endif /* __ASM_VDSO_GETTIMEOFDAY_H */
diff --git a/arch/arm64/include/asm/vdso/gettimeofday.h b/arch/arm64/include/asm/vdso/gettimeofday.h
index afba6ba332f8..9c29ad3049f8 100644
--- a/arch/arm64/include/asm/vdso/gettimeofday.h
+++ b/arch/arm64/include/asm/vdso/gettimeofday.h
@@ -7,6 +7,7 @@
 
 #ifndef __ASSEMBLY__
 
+#include <asm/barrier.h>
 #include <asm/unistd.h>
 
 #define VDSO_HAS_CLOCK_GETRES		1
@@ -96,6 +97,14 @@ const struct vdso_data *__arch_get_vdso_data(void)
 	return _vdso_data;
 }
 
+#ifdef CONFIG_TIME_NS
+static __always_inline
+const struct vdso_data *__arch_get_timens_vdso_data(void)
+{
+	return _timens_data;
+}
+#endif
+
 #endif /* !__ASSEMBLY__ */
 
 #endif /* __ASM_VDSO_GETTIMEOFDAY_H */
diff --git a/arch/arm64/include/uapi/asm/hwcap.h b/arch/arm64/include/uapi/asm/hwcap.h
index 2d6ba1c2592e..912162f73529 100644
--- a/arch/arm64/include/uapi/asm/hwcap.h
+++ b/arch/arm64/include/uapi/asm/hwcap.h
@@ -74,5 +74,6 @@
 #define HWCAP2_DGH		(1 << 15)
 #define HWCAP2_RNG		(1 << 16)
 #define HWCAP2_BTI		(1 << 17)
+/* reserved for HWCAP2_MTE	(1 << 18) */
 
 #endif /* _UAPI__ASM_HWCAP_H */
diff --git a/arch/arm64/include/uapi/asm/sigcontext.h b/arch/arm64/include/uapi/asm/sigcontext.h
index 8b0ebce92427..0c796c795dbe 100644
--- a/arch/arm64/include/uapi/asm/sigcontext.h
+++ b/arch/arm64/include/uapi/asm/sigcontext.h
@@ -179,7 +179,7 @@ struct sve_context {
  * The same convention applies when returning from a signal: a caller
  * will need to remove or resize the sve_context block if it wants to
  * make the SVE registers live when they were previously non-live or
- * vice-versa.  This may require the the caller to allocate fresh
+ * vice-versa.  This may require the caller to allocate fresh
  * memory and/or move other context blocks in the signal frame.
  *
  * Changing the vector length during signal return is not permitted:
diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile
index 151f28521f1e..a561cbb91d4d 100644
--- a/arch/arm64/kernel/Makefile
+++ b/arch/arm64/kernel/Makefile
@@ -29,9 +29,7 @@ $(obj)/%.stub.o: $(obj)/%.o FORCE
 
 obj-$(CONFIG_COMPAT)			+= sys32.o signal32.o			\
 					   sys_compat.o
-ifneq ($(CONFIG_COMPAT_VDSO), y)
 obj-$(CONFIG_COMPAT)			+= sigreturn32.o
-endif
 obj-$(CONFIG_KUSER_HELPERS)		+= kuser32.o
 obj-$(CONFIG_FUNCTION_TRACER)		+= ftrace.o entry-ftrace.o
 obj-$(CONFIG_MODULES)			+= module.o
diff --git a/arch/arm64/kernel/acpi.c b/arch/arm64/kernel/acpi.c
index a7586a4db142..455966401102 100644
--- a/arch/arm64/kernel/acpi.c
+++ b/arch/arm64/kernel/acpi.c
@@ -261,6 +261,81 @@ pgprot_t __acpi_get_mem_attribute(phys_addr_t addr)
 	return __pgprot(PROT_DEVICE_nGnRnE);
 }
 
+void __iomem *acpi_os_ioremap(acpi_physical_address phys, acpi_size size)
+{
+	efi_memory_desc_t *md, *region = NULL;
+	pgprot_t prot;
+
+	if (WARN_ON_ONCE(!efi_enabled(EFI_MEMMAP)))
+		return NULL;
+
+	for_each_efi_memory_desc(md) {
+		u64 end = md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT);
+
+		if (phys < md->phys_addr || phys >= end)
+			continue;
+
+		if (phys + size > end) {
+			pr_warn(FW_BUG "requested region covers multiple EFI memory regions\n");
+			return NULL;
+		}
+		region = md;
+		break;
+	}
+
+	/*
+	 * It is fine for AML to remap regions that are not represented in the
+	 * EFI memory map at all, as it only describes normal memory, and MMIO
+	 * regions that require a virtual mapping to make them accessible to
+	 * the EFI runtime services.
+	 */
+	prot = __pgprot(PROT_DEVICE_nGnRnE);
+	if (region) {
+		switch (region->type) {
+		case EFI_LOADER_CODE:
+		case EFI_LOADER_DATA:
+		case EFI_BOOT_SERVICES_CODE:
+		case EFI_BOOT_SERVICES_DATA:
+		case EFI_CONVENTIONAL_MEMORY:
+		case EFI_PERSISTENT_MEMORY:
+			pr_warn(FW_BUG "requested region covers kernel memory @ %pa\n", &phys);
+			return NULL;
+
+		case EFI_RUNTIME_SERVICES_CODE:
+			/*
+			 * This would be unusual, but not problematic per se,
+			 * as long as we take care not to create a writable
+			 * mapping for executable code.
+			 */
+			prot = PAGE_KERNEL_RO;
+			break;
+
+		case EFI_ACPI_RECLAIM_MEMORY:
+			/*
+			 * ACPI reclaim memory is used to pass firmware tables
+			 * and other data that is intended for consumption by
+			 * the OS only, which may decide it wants to reclaim
+			 * that memory and use it for something else. We never
+			 * do that, but we usually add it to the linear map
+			 * anyway, in which case we should use the existing
+			 * mapping.
+			 */
+			if (memblock_is_map_memory(phys))
+				return (void __iomem *)__phys_to_virt(phys);
+			/* fall through */
+
+		default:
+			if (region->attribute & EFI_MEMORY_WB)
+				prot = PAGE_KERNEL;
+			else if (region->attribute & EFI_MEMORY_WT)
+				prot = __pgprot(PROT_NORMAL_WT);
+			else if (region->attribute & EFI_MEMORY_WC)
+				prot = __pgprot(PROT_NORMAL_NC);
+		}
+	}
+	return __ioremap(phys, size, prot);
+}
+
 /*
  * Claim Synchronous External Aborts as a firmware first notification.
  *
diff --git a/arch/arm64/kernel/alternative.c b/arch/arm64/kernel/alternative.c
index d1757ef1b1e7..73039949b5ce 100644
--- a/arch/arm64/kernel/alternative.c
+++ b/arch/arm64/kernel/alternative.c
@@ -43,20 +43,8 @@ bool alternative_is_applied(u16 cpufeature)
  */
 static bool branch_insn_requires_update(struct alt_instr *alt, unsigned long pc)
 {
-	unsigned long replptr;
-
-	if (kernel_text_address(pc))
-		return true;
-
-	replptr = (unsigned long)ALT_REPL_PTR(alt);
-	if (pc >= replptr && pc <= (replptr + alt->alt_len))
-		return false;
-
-	/*
-	 * Branching into *another* alternate sequence is doomed, and
-	 * we're not even trying to fix it up.
-	 */
-	BUG();
+	unsigned long replptr = (unsigned long)ALT_REPL_PTR(alt);
+	return !(pc >= replptr && pc <= (replptr + alt->alt_len));
 }
 
 #define align_down(x, a)	((unsigned long)(x) & ~(((unsigned long)(a)) - 1))
diff --git a/arch/arm64/kernel/cpu_errata.c b/arch/arm64/kernel/cpu_errata.c
index ad06d6802d2e..79728bfb5351 100644
--- a/arch/arm64/kernel/cpu_errata.c
+++ b/arch/arm64/kernel/cpu_errata.c
@@ -460,6 +460,8 @@ static const struct midr_range arm64_ssb_cpus[] = {
 	MIDR_ALL_VERSIONS(MIDR_CORTEX_A53),
 	MIDR_ALL_VERSIONS(MIDR_CORTEX_A55),
 	MIDR_ALL_VERSIONS(MIDR_BRAHMA_B53),
+	MIDR_ALL_VERSIONS(MIDR_QCOM_KRYO_3XX_SILVER),
+	MIDR_ALL_VERSIONS(MIDR_QCOM_KRYO_4XX_SILVER),
 	{},
 };
 
@@ -470,12 +472,7 @@ static bool
 has_cortex_a76_erratum_1463225(const struct arm64_cpu_capabilities *entry,
 			       int scope)
 {
-	u32 midr = read_cpuid_id();
-	/* Cortex-A76 r0p0 - r3p1 */
-	struct midr_range range = MIDR_RANGE(MIDR_CORTEX_A76, 0, 0, 3, 1);
-
-	WARN_ON(scope != SCOPE_LOCAL_CPU || preemptible());
-	return is_midr_in_range(midr, &range) && is_kernel_in_hyp_mode();
+	return is_affected_midr_range_list(entry, scope) && is_kernel_in_hyp_mode();
 }
 #endif
 
@@ -726,6 +723,8 @@ static const struct midr_range erratum_1418040_list[] = {
 	MIDR_RANGE(MIDR_CORTEX_A76, 0, 0, 3, 1),
 	/* Neoverse-N1 r0p0 to r3p1 */
 	MIDR_RANGE(MIDR_NEOVERSE_N1, 0, 0, 3, 1),
+	/* Kryo4xx Gold (rcpe to rfpf) => (r0p0 to r3p1) */
+	MIDR_RANGE(MIDR_QCOM_KRYO_4XX_GOLD, 0xc, 0xe, 0xf, 0xf),
 	{},
 };
 #endif
@@ -770,11 +769,23 @@ static const struct midr_range erratum_speculative_at_list[] = {
 #ifdef CONFIG_ARM64_ERRATUM_1530923
 	/* Cortex A55 r0p0 to r2p0 */
 	MIDR_RANGE(MIDR_CORTEX_A55, 0, 0, 2, 0),
+	/* Kryo4xx Silver (rdpe => r1p0) */
+	MIDR_REV(MIDR_QCOM_KRYO_4XX_SILVER, 0xd, 0xe),
 #endif
 	{},
 };
 #endif
 
+#ifdef CONFIG_ARM64_ERRATUM_1463225
+static const struct midr_range erratum_1463225[] = {
+	/* Cortex-A76 r0p0 - r3p1 */
+	MIDR_RANGE(MIDR_CORTEX_A76, 0, 0, 3, 1),
+	/* Kryo4xx Gold (rcpe to rfpf) => (r0p0 to r3p1) */
+	MIDR_RANGE(MIDR_QCOM_KRYO_4XX_GOLD, 0xc, 0xe, 0xf, 0xf),
+	{},
+};
+#endif
+
 const struct arm64_cpu_capabilities arm64_errata[] = {
 #ifdef CONFIG_ARM64_WORKAROUND_CLEAN_CACHE
 	{
@@ -914,6 +925,7 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
 		.capability = ARM64_WORKAROUND_1463225,
 		.type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM,
 		.matches = has_cortex_a76_erratum_1463225,
+		.midr_range_list = erratum_1463225,
 	},
 #endif
 #ifdef CONFIG_CAVIUM_TX2_ERRATUM_219
diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c
index 4ae41670c2e6..a389b999482e 100644
--- a/arch/arm64/kernel/cpufeature.c
+++ b/arch/arm64/kernel/cpufeature.c
@@ -119,25 +119,12 @@ static inline void finalize_system_capabilities(void)
 	static_branch_enable(&arm64_const_caps_ready);
 }
 
-static int dump_cpu_hwcaps(struct notifier_block *self, unsigned long v, void *p)
+void dump_cpu_features(void)
 {
 	/* file-wide pr_fmt adds "CPU features: " prefix */
 	pr_emerg("0x%*pb\n", ARM64_NCAPS, &cpu_hwcaps);
-	return 0;
 }
 
-static struct notifier_block cpu_hwcaps_notifier = {
-	.notifier_call = dump_cpu_hwcaps
-};
-
-static int __init register_cpu_hwcaps_dumper(void)
-{
-	atomic_notifier_chain_register(&panic_notifier_list,
-				       &cpu_hwcaps_notifier);
-	return 0;
-}
-__initcall(register_cpu_hwcaps_dumper);
-
 DEFINE_STATIC_KEY_ARRAY_FALSE(cpu_hwcap_keys, ARM64_NCAPS);
 EXPORT_SYMBOL(cpu_hwcap_keys);
 
@@ -269,6 +256,9 @@ static const struct arm64_ftr_bits ftr_id_aa64zfr0[] = {
 };
 
 static const struct arm64_ftr_bits ftr_id_aa64mmfr0[] = {
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_ECV_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_FGT_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR0_EXS_SHIFT, 4, 0),
 	/*
 	 * Page size not being supported at Stage-2 is not fatal. You
 	 * just give up KVM if PAGE_SIZE isn't supported there. Go fix
@@ -312,6 +302,10 @@ static const struct arm64_ftr_bits ftr_id_aa64mmfr0[] = {
 };
 
 static const struct arm64_ftr_bits ftr_id_aa64mmfr1[] = {
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR1_ETS_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR1_TWED_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR1_XNX_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_HIGHER_SAFE, ID_AA64MMFR1_SPECSEI_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR1_PAN_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR1_LOR_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR1_HPD_SHIFT, 4, 0),
@@ -323,8 +317,15 @@ static const struct arm64_ftr_bits ftr_id_aa64mmfr1[] = {
 
 static const struct arm64_ftr_bits ftr_id_aa64mmfr2[] = {
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_E0PD_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_EVT_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_BBM_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_TTL_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_FWB_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_IDS_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_AT_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_ST_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_NV_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_CCIDX_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_LVA_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_IESB_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64MMFR2_LSM_SHIFT, 4, 0),
@@ -345,7 +346,7 @@ static const struct arm64_ftr_bits ftr_ctr[] = {
 	 * make use of *minLine.
 	 * If we have differing I-cache policies, report it as the weakest - VIPT.
 	 */
-	ARM64_FTR_BITS(FTR_VISIBLE, FTR_NONSTRICT, FTR_EXACT, 14, 2, ICACHE_POLICY_VIPT),	/* L1Ip */
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_NONSTRICT, FTR_EXACT, CTR_L1IP_SHIFT, 2, ICACHE_POLICY_VIPT),	/* L1Ip */
 	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, CTR_IMINLINE_SHIFT, 4, 0),
 	ARM64_FTR_END,
 };
@@ -356,19 +357,19 @@ struct arm64_ftr_reg arm64_ftr_reg_ctrel0 = {
 };
 
 static const struct arm64_ftr_bits ftr_id_mmfr0[] = {
-	S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, 28, 4, 0xf),	/* InnerShr */
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, 24, 4, 0),	/* FCSE */
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, 20, 4, 0),	/* AuxReg */
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, 16, 4, 0),	/* TCM */
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, 12, 4, 0),	/* ShareLvl */
-	S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, 8, 4, 0xf),	/* OuterShr */
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, 4, 4, 0),	/* PMSA */
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, 0, 4, 0),	/* VMSA */
+	S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_MMFR0_INNERSHR_SHIFT, 4, 0xf),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_MMFR0_FCSE_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_MMFR0_AUXREG_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_MMFR0_TCM_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_MMFR0_SHARELVL_SHIFT, 4, 0),
+	S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_MMFR0_OUTERSHR_SHIFT, 4, 0xf),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_MMFR0_PMSA_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_MMFR0_VMSA_SHIFT, 4, 0),
 	ARM64_FTR_END,
 };
 
 static const struct arm64_ftr_bits ftr_id_aa64dfr0[] = {
-	S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, 36, 4, 0),
+	S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64DFR0_DOUBLELOCK_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64DFR0_PMSVER_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64DFR0_CTX_CMPS_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64DFR0_WRPS_SHIFT, 4, 0),
@@ -384,14 +385,14 @@ static const struct arm64_ftr_bits ftr_id_aa64dfr0[] = {
 };
 
 static const struct arm64_ftr_bits ftr_mvfr2[] = {
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, 4, 4, 0),		/* FPMisc */
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, 0, 4, 0),		/* SIMDMisc */
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR2_FPMISC_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, MVFR2_SIMDMISC_SHIFT, 4, 0),
 	ARM64_FTR_END,
 };
 
 static const struct arm64_ftr_bits ftr_dczid[] = {
-	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_EXACT, 4, 1, 1),		/* DZP */
-	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, 0, 4, 0),	/* BS */
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_EXACT, DCZID_DZP_SHIFT, 1, 1),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, DCZID_BS_SHIFT, 4, 0),
 	ARM64_FTR_END,
 };
 
@@ -423,7 +424,8 @@ static const struct arm64_ftr_bits ftr_id_mmfr4[] = {
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_MMFR4_HPDS_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_MMFR4_CNP_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_MMFR4_XNX_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, 4, 4, 0),	/* ac2 */
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_MMFR4_AC2_SHIFT, 4, 0),
+
 	/*
 	 * SpecSEI = 1 indicates that the PE might generate an SError on an
 	 * external abort on speculative read. It is safe to assume that an
@@ -465,10 +467,10 @@ static const struct arm64_ftr_bits ftr_id_isar6[] = {
 static const struct arm64_ftr_bits ftr_id_pfr0[] = {
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_PFR0_DIT_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_PFR0_CSV2_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, 12, 4, 0),		/* State3 */
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, 8, 4, 0),		/* State2 */
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, 4, 4, 0),		/* State1 */
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, 0, 4, 0),		/* State0 */
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_PFR0_STATE3_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_PFR0_STATE2_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_PFR0_STATE1_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_PFR0_STATE0_SHIFT, 4, 0),
 	ARM64_FTR_END,
 };
 
@@ -492,13 +494,13 @@ static const struct arm64_ftr_bits ftr_id_pfr2[] = {
 
 static const struct arm64_ftr_bits ftr_id_dfr0[] = {
 	/* [31:28] TraceFilt */
-	S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, 24, 4, 0xf),	/* PerfMon */
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, 20, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, 16, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, 12, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, 8, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, 4, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, 0, 4, 0),
+	S_ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_DFR0_PERFMON_SHIFT, 4, 0xf),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_DFR0_MPROFDBG_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_DFR0_MMAPTRC_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_DFR0_COPTRC_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_DFR0_MMAPDBG_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_DFR0_COPSDBG_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_LOWER_SAFE, ID_DFR0_COPDBG_SHIFT, 4, 0),
 	ARM64_FTR_END,
 };
 
@@ -697,11 +699,52 @@ static s64 arm64_ftr_safe_value(const struct arm64_ftr_bits *ftrp, s64 new,
 
 static void __init sort_ftr_regs(void)
 {
-	int i;
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(arm64_ftr_regs); i++) {
+		const struct arm64_ftr_reg *ftr_reg = arm64_ftr_regs[i].reg;
+		const struct arm64_ftr_bits *ftr_bits = ftr_reg->ftr_bits;
+		unsigned int j = 0;
+
+		/*
+		 * Features here must be sorted in descending order with respect
+		 * to their shift values and should not overlap with each other.
+		 */
+		for (; ftr_bits->width != 0; ftr_bits++, j++) {
+			unsigned int width = ftr_reg->ftr_bits[j].width;
+			unsigned int shift = ftr_reg->ftr_bits[j].shift;
+			unsigned int prev_shift;
+
+			WARN((shift  + width) > 64,
+				"%s has invalid feature at shift %d\n",
+				ftr_reg->name, shift);
+
+			/*
+			 * Skip the first feature. There is nothing to
+			 * compare against for now.
+			 */
+			if (j == 0)
+				continue;
+
+			prev_shift = ftr_reg->ftr_bits[j - 1].shift;
+			WARN((shift + width) > prev_shift,
+				"%s has feature overlap at shift %d\n",
+				ftr_reg->name, shift);
+		}
 
-	/* Check that the array is sorted so that we can do the binary search */
-	for (i = 1; i < ARRAY_SIZE(arm64_ftr_regs); i++)
+		/*
+		 * Skip the first register. There is nothing to
+		 * compare against for now.
+		 */
+		if (i == 0)
+			continue;
+		/*
+		 * Registers here must be sorted in ascending order with respect
+		 * to sys_id for subsequent binary search in get_arm64_ftr_reg()
+		 * to work correctly.
+		 */
 		BUG_ON(arm64_ftr_regs[i].sys_id < arm64_ftr_regs[i - 1].sys_id);
+	}
 }
 
 /*
@@ -1290,6 +1333,8 @@ static bool unmap_kernel_at_el0(const struct arm64_cpu_capabilities *entry,
 		MIDR_ALL_VERSIONS(MIDR_CORTEX_A73),
 		MIDR_ALL_VERSIONS(MIDR_HISI_TSV110),
 		MIDR_ALL_VERSIONS(MIDR_NVIDIA_CARMEL),
+		MIDR_ALL_VERSIONS(MIDR_QCOM_KRYO_3XX_SILVER),
+		MIDR_ALL_VERSIONS(MIDR_QCOM_KRYO_4XX_SILVER),
 		{ /* sentinel */ }
 	};
 	char const *str = "kpti command line option";
@@ -1406,6 +1451,8 @@ static bool cpu_has_broken_dbm(void)
 	static const struct midr_range cpus[] = {
 #ifdef CONFIG_ARM64_ERRATUM_1024718
 		MIDR_RANGE(MIDR_CORTEX_A55, 0, 0, 1, 0),  // A55 r0p0 -r1p0
+		/* Kryo4xx Silver (rdpe => r1p0) */
+		MIDR_REV(MIDR_QCOM_KRYO_4XX_SILVER, 0xd, 0xe),
 #endif
 		{},
 	};
@@ -1880,6 +1927,26 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.matches = has_cpuid_feature,
 		.cpu_enable = cpu_has_fwb,
 	},
+	{
+		.desc = "ARMv8.4 Translation Table Level",
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.capability = ARM64_HAS_ARMv8_4_TTL,
+		.sys_reg = SYS_ID_AA64MMFR2_EL1,
+		.sign = FTR_UNSIGNED,
+		.field_pos = ID_AA64MMFR2_TTL_SHIFT,
+		.min_field_value = 1,
+		.matches = has_cpuid_feature,
+	},
+	{
+		.desc = "TLB range maintenance instructions",
+		.capability = ARM64_HAS_TLB_RANGE,
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.matches = has_cpuid_feature,
+		.sys_reg = SYS_ID_AA64ISAR0_EL1,
+		.field_pos = ID_AA64ISAR0_TLB_SHIFT,
+		.sign = FTR_UNSIGNED,
+		.min_field_value = ID_AA64ISAR0_TLB_RANGE,
+	},
 #ifdef CONFIG_ARM64_HW_AFDBM
 	{
 		/*
diff --git a/arch/arm64/kernel/cpuinfo.c b/arch/arm64/kernel/cpuinfo.c
index 86637466daa8..393c6fb1f1cb 100644
--- a/arch/arm64/kernel/cpuinfo.c
+++ b/arch/arm64/kernel/cpuinfo.c
@@ -93,6 +93,7 @@ static const char *const hwcap_str[] = {
 	"dgh",
 	"rng",
 	"bti",
+	/* reserved for "mte" */
 	NULL
 };
 
diff --git a/arch/arm64/kernel/crash_core.c b/arch/arm64/kernel/crash_core.c
index 1f646b07e3e9..314391a156ee 100644
--- a/arch/arm64/kernel/crash_core.c
+++ b/arch/arm64/kernel/crash_core.c
@@ -7,6 +7,14 @@
 #include <linux/crash_core.h>
 #include <asm/cpufeature.h>
 #include <asm/memory.h>
+#include <asm/pgtable-hwdef.h>
+
+static inline u64 get_tcr_el1_t1sz(void);
+
+static inline u64 get_tcr_el1_t1sz(void)
+{
+	return (read_sysreg(tcr_el1) & TCR_T1SZ_MASK) >> TCR_T1SZ_OFFSET;
+}
 
 void arch_crash_save_vmcoreinfo(void)
 {
@@ -16,6 +24,8 @@ void arch_crash_save_vmcoreinfo(void)
 						kimage_voffset);
 	vmcoreinfo_append_str("NUMBER(PHYS_OFFSET)=0x%llx\n",
 						PHYS_OFFSET);
+	vmcoreinfo_append_str("NUMBER(TCR_EL1_T1SZ)=0x%llx\n",
+						get_tcr_el1_t1sz());
 	vmcoreinfo_append_str("KERNELOFFSET=%lx\n", kaslr_offset());
 	vmcoreinfo_append_str("NUMBER(KERNELPACMASK)=0x%llx\n",
 						system_supports_address_auth() ?
diff --git a/arch/arm64/kernel/debug-monitors.c b/arch/arm64/kernel/debug-monitors.c
index 5df49366e9ab..7310a4f7f993 100644
--- a/arch/arm64/kernel/debug-monitors.c
+++ b/arch/arm64/kernel/debug-monitors.c
@@ -141,17 +141,20 @@ postcore_initcall(debug_monitors_init);
 /*
  * Single step API and exception handling.
  */
-static void set_regs_spsr_ss(struct pt_regs *regs)
+static void set_user_regs_spsr_ss(struct user_pt_regs *regs)
 {
 	regs->pstate |= DBG_SPSR_SS;
 }
-NOKPROBE_SYMBOL(set_regs_spsr_ss);
+NOKPROBE_SYMBOL(set_user_regs_spsr_ss);
 
-static void clear_regs_spsr_ss(struct pt_regs *regs)
+static void clear_user_regs_spsr_ss(struct user_pt_regs *regs)
 {
 	regs->pstate &= ~DBG_SPSR_SS;
 }
-NOKPROBE_SYMBOL(clear_regs_spsr_ss);
+NOKPROBE_SYMBOL(clear_user_regs_spsr_ss);
+
+#define set_regs_spsr_ss(r)	set_user_regs_spsr_ss(&(r)->user_regs)
+#define clear_regs_spsr_ss(r)	clear_user_regs_spsr_ss(&(r)->user_regs)
 
 static DEFINE_SPINLOCK(debug_hook_lock);
 static LIST_HEAD(user_step_hook);
@@ -391,17 +394,26 @@ void user_rewind_single_step(struct task_struct *task)
 	 * If single step is active for this thread, then set SPSR.SS
 	 * to 1 to avoid returning to the active-pending state.
 	 */
-	if (test_ti_thread_flag(task_thread_info(task), TIF_SINGLESTEP))
+	if (test_tsk_thread_flag(task, TIF_SINGLESTEP))
 		set_regs_spsr_ss(task_pt_regs(task));
 }
 NOKPROBE_SYMBOL(user_rewind_single_step);
 
 void user_fastforward_single_step(struct task_struct *task)
 {
-	if (test_ti_thread_flag(task_thread_info(task), TIF_SINGLESTEP))
+	if (test_tsk_thread_flag(task, TIF_SINGLESTEP))
 		clear_regs_spsr_ss(task_pt_regs(task));
 }
 
+void user_regs_reset_single_step(struct user_pt_regs *regs,
+				 struct task_struct *task)
+{
+	if (test_tsk_thread_flag(task, TIF_SINGLESTEP))
+		set_user_regs_spsr_ss(regs);
+	else
+		clear_user_regs_spsr_ss(regs);
+}
+
 /* Kernel API */
 void kernel_enable_single_step(struct pt_regs *regs)
 {
diff --git a/arch/arm64/kernel/entry-common.c b/arch/arm64/kernel/entry-common.c
index 3dbdf9752b11..d3be9dbf5490 100644
--- a/arch/arm64/kernel/entry-common.c
+++ b/arch/arm64/kernel/entry-common.c
@@ -57,7 +57,7 @@ static void notrace el1_dbg(struct pt_regs *regs, unsigned long esr)
 	/*
 	 * The CPU masked interrupts, and we are leaving them masked during
 	 * do_debug_exception(). Update PMR as if we had called
-	 * local_mask_daif().
+	 * local_daif_mask().
 	 */
 	if (system_uses_irq_prio_masking())
 		gic_write_pmr(GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET);
diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index 5304d193c79d..2646178c8329 100644
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -15,6 +15,7 @@
 #include <asm/assembler.h>
 #include <asm/asm-offsets.h>
 #include <asm/asm_pointer_auth.h>
+#include <asm/bug.h>
 #include <asm/cpufeature.h>
 #include <asm/errno.h>
 #include <asm/esr.h>
@@ -126,8 +127,10 @@ alternative_else_nop_endif
 	add	\dst, \dst, #(\sym - .entry.tramp.text)
 	.endm
 
-	// This macro corrupts x0-x3. It is the caller's duty
-	// to save/restore them if required.
+	/*
+	 * This macro corrupts x0-x3. It is the caller's duty  to save/restore
+	 * them if required.
+	 */
 	.macro	apply_ssbd, state, tmp1, tmp2
 #ifdef CONFIG_ARM64_SSBD
 alternative_cb	arm64_enable_wa2_handling
@@ -167,13 +170,28 @@ alternative_cb_end
 	stp	x28, x29, [sp, #16 * 14]
 
 	.if	\el == 0
+	.if	\regsize == 32
+	/*
+	 * If we're returning from a 32-bit task on a system affected by
+	 * 1418040 then re-enable userspace access to the virtual counter.
+	 */
+#ifdef CONFIG_ARM64_ERRATUM_1418040
+alternative_if ARM64_WORKAROUND_1418040
+	mrs	x0, cntkctl_el1
+	orr	x0, x0, #2	// ARCH_TIMER_USR_VCT_ACCESS_EN
+	msr	cntkctl_el1, x0
+alternative_else_nop_endif
+#endif
+	.endif
 	clear_gp_regs
 	mrs	x21, sp_el0
 	ldr_this_cpu	tsk, __entry_task, x20
 	msr	sp_el0, tsk
 
-	// Ensure MDSCR_EL1.SS is clear, since we can unmask debug exceptions
-	// when scheduling.
+	/*
+	 * Ensure MDSCR_EL1.SS is clear, since we can unmask debug exceptions
+	 * when scheduling.
+	 */
 	ldr	x19, [tsk, #TSK_TI_FLAGS]
 	disable_step_tsk x19, x20
 
@@ -209,28 +227,9 @@ alternative_cb_end
 	add	x29, sp, #S_STACKFRAME
 
 #ifdef CONFIG_ARM64_SW_TTBR0_PAN
-	/*
-	 * Set the TTBR0 PAN bit in SPSR. When the exception is taken from
-	 * EL0, there is no need to check the state of TTBR0_EL1 since
-	 * accesses are always enabled.
-	 * Note that the meaning of this bit differs from the ARMv8.1 PAN
-	 * feature as all TTBR0_EL1 accesses are disabled, not just those to
-	 * user mappings.
-	 */
-alternative_if ARM64_HAS_PAN
-	b	1f				// skip TTBR0 PAN
+alternative_if_not ARM64_HAS_PAN
+	bl	__swpan_entry_el\el
 alternative_else_nop_endif
-
-	.if	\el != 0
-	mrs	x21, ttbr0_el1
-	tst	x21, #TTBR_ASID_MASK		// Check for the reserved ASID
-	orr	x23, x23, #PSR_PAN_BIT		// Set the emulated PAN in the saved SPSR
-	b.eq	1f				// TTBR0 access already disabled
-	and	x23, x23, #~PSR_PAN_BIT		// Clear the emulated PAN in the saved SPSR
-	.endif
-
-	__uaccess_ttbr0_disable x21
-1:
 #endif
 
 	stp	x22, x23, [sp, #S_PC]
@@ -284,34 +283,9 @@ alternative_else_nop_endif
 	.endif
 
 #ifdef CONFIG_ARM64_SW_TTBR0_PAN
-	/*
-	 * Restore access to TTBR0_EL1. If returning to EL0, no need for SPSR
-	 * PAN bit checking.
-	 */
-alternative_if ARM64_HAS_PAN
-	b	2f				// skip TTBR0 PAN
+alternative_if_not ARM64_HAS_PAN
+	bl	__swpan_exit_el\el
 alternative_else_nop_endif
-
-	.if	\el != 0
-	tbnz	x22, #22, 1f			// Skip re-enabling TTBR0 access if the PSR_PAN_BIT is set
-	.endif
-
-	__uaccess_ttbr0_enable x0, x1
-
-	.if	\el == 0
-	/*
-	 * Enable errata workarounds only if returning to user. The only
-	 * workaround currently required for TTBR0_EL1 changes are for the
-	 * Cavium erratum 27456 (broadcast TLBI instructions may cause I-cache
-	 * corruption).
-	 */
-	bl	post_ttbr_update_workaround
-	.endif
-1:
-	.if	\el != 0
-	and	x22, x22, #~PSR_PAN_BIT		// ARMv8.0 CPUs do not understand this bit
-	.endif
-2:
 #endif
 
 	.if	\el == 0
@@ -320,6 +294,14 @@ alternative_else_nop_endif
 	tst	x22, #PSR_MODE32_BIT		// native task?
 	b.eq	3f
 
+#ifdef CONFIG_ARM64_ERRATUM_1418040
+alternative_if ARM64_WORKAROUND_1418040
+	mrs	x0, cntkctl_el1
+	bic	x0, x0, #2			// ARCH_TIMER_USR_VCT_ACCESS_EN
+	msr	cntkctl_el1, x0
+alternative_else_nop_endif
+#endif
+
 #ifdef CONFIG_ARM64_ERRATUM_845719
 alternative_if ARM64_WORKAROUND_845719
 #ifdef CONFIG_PID_IN_CONTEXTIDR
@@ -331,21 +313,6 @@ alternative_if ARM64_WORKAROUND_845719
 alternative_else_nop_endif
 #endif
 3:
-#ifdef CONFIG_ARM64_ERRATUM_1418040
-alternative_if_not ARM64_WORKAROUND_1418040
-	b	4f
-alternative_else_nop_endif
-	/*
-	 * if (x22.mode32 == cntkctl_el1.el0vcten)
-	 *     cntkctl_el1.el0vcten = ~cntkctl_el1.el0vcten
-	 */
-	mrs	x1, cntkctl_el1
-	eon	x0, x1, x22, lsr #3
-	tbz	x0, #1, 4f
-	eor	x1, x1, #2	// ARCH_TIMER_USR_VCT_ACCESS_EN
-	msr	cntkctl_el1, x1
-4:
-#endif
 	scs_save tsk, x0
 
 	/* No kernel C function calls after this as user keys are set. */
@@ -377,11 +344,11 @@ alternative_else_nop_endif
 	.if	\el == 0
 alternative_insn eret, nop, ARM64_UNMAP_KERNEL_AT_EL0
 #ifdef CONFIG_UNMAP_KERNEL_AT_EL0
-	bne	5f
+	bne	4f
 	msr	far_el1, x30
 	tramp_alias	x30, tramp_exit_native
 	br	x30
-5:
+4:
 	tramp_alias	x30, tramp_exit_compat
 	br	x30
 #endif
@@ -391,6 +358,49 @@ alternative_insn eret, nop, ARM64_UNMAP_KERNEL_AT_EL0
 	sb
 	.endm
 
+#ifdef CONFIG_ARM64_SW_TTBR0_PAN
+	/*
+	 * Set the TTBR0 PAN bit in SPSR. When the exception is taken from
+	 * EL0, there is no need to check the state of TTBR0_EL1 since
+	 * accesses are always enabled.
+	 * Note that the meaning of this bit differs from the ARMv8.1 PAN
+	 * feature as all TTBR0_EL1 accesses are disabled, not just those to
+	 * user mappings.
+	 */
+SYM_CODE_START_LOCAL(__swpan_entry_el1)
+	mrs	x21, ttbr0_el1
+	tst	x21, #TTBR_ASID_MASK		// Check for the reserved ASID
+	orr	x23, x23, #PSR_PAN_BIT		// Set the emulated PAN in the saved SPSR
+	b.eq	1f				// TTBR0 access already disabled
+	and	x23, x23, #~PSR_PAN_BIT		// Clear the emulated PAN in the saved SPSR
+SYM_INNER_LABEL(__swpan_entry_el0, SYM_L_LOCAL)
+	__uaccess_ttbr0_disable x21
+1:	ret
+SYM_CODE_END(__swpan_entry_el1)
+
+	/*
+	 * Restore access to TTBR0_EL1. If returning to EL0, no need for SPSR
+	 * PAN bit checking.
+	 */
+SYM_CODE_START_LOCAL(__swpan_exit_el1)
+	tbnz	x22, #22, 1f			// Skip re-enabling TTBR0 access if the PSR_PAN_BIT is set
+	__uaccess_ttbr0_enable x0, x1
+1:	and	x22, x22, #~PSR_PAN_BIT		// ARMv8.0 CPUs do not understand this bit
+	ret
+SYM_CODE_END(__swpan_exit_el1)
+
+SYM_CODE_START_LOCAL(__swpan_exit_el0)
+	__uaccess_ttbr0_enable x0, x1
+	/*
+	 * Enable errata workarounds only if returning to user. The only
+	 * workaround currently required for TTBR0_EL1 changes are for the
+	 * Cavium erratum 27456 (broadcast TLBI instructions may cause I-cache
+	 * corruption).
+	 */
+	b	post_ttbr_update_workaround
+SYM_CODE_END(__swpan_exit_el0)
+#endif
+
 	.macro	irq_stack_entry
 	mov	x19, sp			// preserve the original sp
 #ifdef CONFIG_SHADOW_CALL_STACK
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index 35cb5e66c504..55c8f3ec6705 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -12,6 +12,7 @@
 #include <linux/bug.h>
 #include <linux/cache.h>
 #include <linux/compat.h>
+#include <linux/compiler.h>
 #include <linux/cpu.h>
 #include <linux/cpu_pm.h>
 #include <linux/kernel.h>
@@ -119,10 +120,20 @@ struct fpsimd_last_state_struct {
 static DEFINE_PER_CPU(struct fpsimd_last_state_struct, fpsimd_last_state);
 
 /* Default VL for tasks that don't set it explicitly: */
-static int sve_default_vl = -1;
+static int __sve_default_vl = -1;
+
+static int get_sve_default_vl(void)
+{
+	return READ_ONCE(__sve_default_vl);
+}
 
 #ifdef CONFIG_ARM64_SVE
 
+static void set_sve_default_vl(int val)
+{
+	WRITE_ONCE(__sve_default_vl, val);
+}
+
 /* Maximum supported vector length across all CPUs (initially poisoned) */
 int __ro_after_init sve_max_vl = SVE_VL_MIN;
 int __ro_after_init sve_max_virtualisable_vl = SVE_VL_MIN;
@@ -338,13 +349,13 @@ static unsigned int find_supported_vector_length(unsigned int vl)
 	return sve_vl_from_vq(__bit_to_vq(bit));
 }
 
-#ifdef CONFIG_SYSCTL
+#if defined(CONFIG_ARM64_SVE) && defined(CONFIG_SYSCTL)
 
 static int sve_proc_do_default_vl(struct ctl_table *table, int write,
 				  void *buffer, size_t *lenp, loff_t *ppos)
 {
 	int ret;
-	int vl = sve_default_vl;
+	int vl = get_sve_default_vl();
 	struct ctl_table tmp_table = {
 		.data = &vl,
 		.maxlen = sizeof(vl),
@@ -361,7 +372,7 @@ static int sve_proc_do_default_vl(struct ctl_table *table, int write,
 	if (!sve_vl_valid(vl))
 		return -EINVAL;
 
-	sve_default_vl = find_supported_vector_length(vl);
+	set_sve_default_vl(find_supported_vector_length(vl));
 	return 0;
 }
 
@@ -383,9 +394,9 @@ static int __init sve_sysctl_init(void)
 	return 0;
 }
 
-#else /* ! CONFIG_SYSCTL */
+#else /* ! (CONFIG_ARM64_SVE && CONFIG_SYSCTL) */
 static int __init sve_sysctl_init(void) { return 0; }
-#endif /* ! CONFIG_SYSCTL */
+#endif /* ! (CONFIG_ARM64_SVE && CONFIG_SYSCTL) */
 
 #define ZREG(sve_state, vq, n) ((char *)(sve_state) +		\
 	(SVE_SIG_ZREG_OFFSET(vq, n) - SVE_SIG_REGS_OFFSET))
@@ -868,7 +879,7 @@ void __init sve_setup(void)
 	 * For the default VL, pick the maximum supported value <= 64.
 	 * VL == 64 is guaranteed not to grow the signal frame.
 	 */
-	sve_default_vl = find_supported_vector_length(64);
+	set_sve_default_vl(find_supported_vector_length(64));
 
 	bitmap_andnot(tmp_map, sve_vq_partial_map, sve_vq_map,
 		      SVE_VQ_MAX);
@@ -889,7 +900,7 @@ void __init sve_setup(void)
 	pr_info("SVE: maximum available vector length %u bytes per vector\n",
 		sve_max_vl);
 	pr_info("SVE: default vector length %u bytes per vector\n",
-		sve_default_vl);
+		get_sve_default_vl());
 
 	/* KVM decides whether to support mismatched systems. Just warn here: */
 	if (sve_max_virtualisable_vl < sve_max_vl)
@@ -1029,13 +1040,13 @@ void fpsimd_flush_thread(void)
 		 * vector length configured: no kernel task can become a user
 		 * task without an exec and hence a call to this function.
 		 * By the time the first call to this function is made, all
-		 * early hardware probing is complete, so sve_default_vl
+		 * early hardware probing is complete, so __sve_default_vl
 		 * should be valid.
 		 * If a bug causes this to go wrong, we make some noise and
 		 * try to fudge thread.sve_vl to a safe value here.
 		 */
 		vl = current->thread.sve_vl_onexec ?
-			current->thread.sve_vl_onexec : sve_default_vl;
+			current->thread.sve_vl_onexec : get_sve_default_vl();
 
 		if (WARN_ON(!sve_vl_valid(vl)))
 			vl = SVE_VL_MIN;
diff --git a/arch/arm64/kernel/hw_breakpoint.c b/arch/arm64/kernel/hw_breakpoint.c
index 0b727edf4104..af234a1e08b7 100644
--- a/arch/arm64/kernel/hw_breakpoint.c
+++ b/arch/arm64/kernel/hw_breakpoint.c
@@ -730,6 +730,27 @@ static u64 get_distance_from_watchpoint(unsigned long addr, u64 val,
 		return 0;
 }
 
+static int watchpoint_report(struct perf_event *wp, unsigned long addr,
+			     struct pt_regs *regs)
+{
+	int step = is_default_overflow_handler(wp);
+	struct arch_hw_breakpoint *info = counter_arch_bp(wp);
+
+	info->trigger = addr;
+
+	/*
+	 * If we triggered a user watchpoint from a uaccess routine, then
+	 * handle the stepping ourselves since userspace really can't help
+	 * us with this.
+	 */
+	if (!user_mode(regs) && info->ctrl.privilege == AARCH64_BREAKPOINT_EL0)
+		step = 1;
+	else
+		perf_bp_event(wp, regs);
+
+	return step;
+}
+
 static int watchpoint_handler(unsigned long addr, unsigned int esr,
 			      struct pt_regs *regs)
 {
@@ -739,7 +760,6 @@ static int watchpoint_handler(unsigned long addr, unsigned int esr,
 	u64 val;
 	struct perf_event *wp, **slots;
 	struct debug_info *debug_info;
-	struct arch_hw_breakpoint *info;
 	struct arch_hw_breakpoint_ctrl ctrl;
 
 	slots = this_cpu_ptr(wp_on_reg);
@@ -777,25 +797,13 @@ static int watchpoint_handler(unsigned long addr, unsigned int esr,
 		if (dist != 0)
 			continue;
 
-		info = counter_arch_bp(wp);
-		info->trigger = addr;
-		perf_bp_event(wp, regs);
-
-		/* Do we need to handle the stepping? */
-		if (is_default_overflow_handler(wp))
-			step = 1;
+		step = watchpoint_report(wp, addr, regs);
 	}
-	if (min_dist > 0 && min_dist != -1) {
-		/* No exact match found. */
-		wp = slots[closest_match];
-		info = counter_arch_bp(wp);
-		info->trigger = addr;
-		perf_bp_event(wp, regs);
 
-		/* Do we need to handle the stepping? */
-		if (is_default_overflow_handler(wp))
-			step = 1;
-	}
+	/* No exact match found? */
+	if (min_dist > 0 && min_dist != -1)
+		step = watchpoint_report(slots[closest_match], addr, regs);
+
 	rcu_read_unlock();
 
 	if (!step)
diff --git a/arch/arm64/kernel/insn.c b/arch/arm64/kernel/insn.c
index 684d871ae38d..a107375005bc 100644
--- a/arch/arm64/kernel/insn.c
+++ b/arch/arm64/kernel/insn.c
@@ -135,7 +135,7 @@ int __kprobes aarch64_insn_read(void *addr, u32 *insnp)
 	int ret;
 	__le32 val;
 
-	ret = probe_kernel_read(&val, addr, AARCH64_INSN_SIZE);
+	ret = copy_from_kernel_nofault(&val, addr, AARCH64_INSN_SIZE);
 	if (!ret)
 		*insnp = le32_to_cpu(val);
 
@@ -151,7 +151,7 @@ static int __kprobes __aarch64_insn_write(void *addr, __le32 insn)
 	raw_spin_lock_irqsave(&patch_lock, flags);
 	waddr = patch_map(addr, FIX_TEXT_POKE0);
 
-	ret = probe_kernel_write(waddr, &insn, AARCH64_INSN_SIZE);
+	ret = copy_to_kernel_nofault(waddr, &insn, AARCH64_INSN_SIZE);
 
 	patch_unmap(FIX_TEXT_POKE0);
 	raw_spin_unlock_irqrestore(&patch_lock, flags);
diff --git a/arch/arm64/kernel/kgdb.c b/arch/arm64/kernel/kgdb.c
index 43119922341f..1a157ca33262 100644
--- a/arch/arm64/kernel/kgdb.c
+++ b/arch/arm64/kernel/kgdb.c
@@ -252,7 +252,7 @@ static int kgdb_step_brk_fn(struct pt_regs *regs, unsigned int esr)
 	if (!kgdb_single_step)
 		return DBG_HOOK_ERROR;
 
-	kgdb_handle_exception(1, SIGTRAP, 0, regs);
+	kgdb_handle_exception(0, SIGTRAP, 0, regs);
 	return DBG_HOOK_HANDLED;
 }
 NOKPROBE_SYMBOL(kgdb_step_brk_fn);
diff --git a/arch/arm64/kernel/machine_kexec_file.c b/arch/arm64/kernel/machine_kexec_file.c
index 522e6f517ec0..361a1143e09e 100644
--- a/arch/arm64/kernel/machine_kexec_file.c
+++ b/arch/arm64/kernel/machine_kexec_file.c
@@ -219,8 +219,7 @@ static int prepare_elf_headers(void **addr, unsigned long *sz)
 					MEMBLOCK_NONE, &start, &end, NULL)
 		nr_ranges++;
 
-	cmem = kmalloc(sizeof(struct crash_mem) +
-			sizeof(struct crash_mem_range) * nr_ranges, GFP_KERNEL);
+	cmem = kmalloc(struct_size(cmem, ranges, nr_ranges), GFP_KERNEL);
 	if (!cmem)
 		return -ENOMEM;
 
diff --git a/arch/arm64/kernel/module-plts.c b/arch/arm64/kernel/module-plts.c
index 65b08a74aec6..0ce3a28e3347 100644
--- a/arch/arm64/kernel/module-plts.c
+++ b/arch/arm64/kernel/module-plts.c
@@ -253,6 +253,40 @@ static unsigned int count_plts(Elf64_Sym *syms, Elf64_Rela *rela, int num,
 	return ret;
 }
 
+static bool branch_rela_needs_plt(Elf64_Sym *syms, Elf64_Rela *rela,
+				  Elf64_Word dstidx)
+{
+
+	Elf64_Sym *s = syms + ELF64_R_SYM(rela->r_info);
+
+	if (s->st_shndx == dstidx)
+		return false;
+
+	return ELF64_R_TYPE(rela->r_info) == R_AARCH64_JUMP26 ||
+	       ELF64_R_TYPE(rela->r_info) == R_AARCH64_CALL26;
+}
+
+/* Group branch PLT relas at the front end of the array. */
+static int partition_branch_plt_relas(Elf64_Sym *syms, Elf64_Rela *rela,
+				      int numrels, Elf64_Word dstidx)
+{
+	int i = 0, j = numrels - 1;
+
+	if (!IS_ENABLED(CONFIG_RANDOMIZE_BASE))
+		return 0;
+
+	while (i < j) {
+		if (branch_rela_needs_plt(syms, &rela[i], dstidx))
+			i++;
+		else if (branch_rela_needs_plt(syms, &rela[j], dstidx))
+			swap(rela[i], rela[j]);
+		else
+			j--;
+	}
+
+	return i;
+}
+
 int module_frob_arch_sections(Elf_Ehdr *ehdr, Elf_Shdr *sechdrs,
 			      char *secstrings, struct module *mod)
 {
@@ -290,7 +324,7 @@ int module_frob_arch_sections(Elf_Ehdr *ehdr, Elf_Shdr *sechdrs,
 
 	for (i = 0; i < ehdr->e_shnum; i++) {
 		Elf64_Rela *rels = (void *)ehdr + sechdrs[i].sh_offset;
-		int numrels = sechdrs[i].sh_size / sizeof(Elf64_Rela);
+		int nents, numrels = sechdrs[i].sh_size / sizeof(Elf64_Rela);
 		Elf64_Shdr *dstsec = sechdrs + sechdrs[i].sh_info;
 
 		if (sechdrs[i].sh_type != SHT_RELA)
@@ -300,8 +334,14 @@ int module_frob_arch_sections(Elf_Ehdr *ehdr, Elf_Shdr *sechdrs,
 		if (!(dstsec->sh_flags & SHF_EXECINSTR))
 			continue;
 
-		/* sort by type, symbol index and addend */
-		sort(rels, numrels, sizeof(Elf64_Rela), cmp_rela, NULL);
+		/*
+		 * sort branch relocations requiring a PLT by type, symbol index
+		 * and addend
+		 */
+		nents = partition_branch_plt_relas(syms, rels, numrels,
+						   sechdrs[i].sh_info);
+		if (nents)
+			sort(rels, nents, sizeof(Elf64_Rela), cmp_rela, NULL);
 
 		if (!str_has_prefix(secstrings + dstsec->sh_name, ".init"))
 			core_plts += count_plts(syms, rels, numrels,
diff --git a/arch/arm64/kernel/perf_event.c b/arch/arm64/kernel/perf_event.c
index 4d7879484cec..462f9a9cc44b 100644
--- a/arch/arm64/kernel/perf_event.c
+++ b/arch/arm64/kernel/perf_event.c
@@ -13,12 +13,15 @@
 #include <asm/sysreg.h>
 #include <asm/virt.h>
 
+#include <clocksource/arm_arch_timer.h>
+
 #include <linux/acpi.h>
 #include <linux/clocksource.h>
 #include <linux/kvm_host.h>
 #include <linux/of.h>
 #include <linux/perf/arm_pmu.h>
 #include <linux/platform_device.h>
+#include <linux/sched_clock.h>
 #include <linux/smp.h>
 
 /* ARMv8 Cortex-A53 specific event types. */
@@ -155,7 +158,7 @@ armv8pmu_events_sysfs_show(struct device *dev,
 
 	pmu_attr = container_of(attr, struct perf_pmu_events_attr, attr);
 
-	return sprintf(page, "event=0x%03llx\n", pmu_attr->id);
+	return sprintf(page, "event=0x%04llx\n", pmu_attr->id);
 }
 
 #define ARMV8_EVENT_ATTR(name, config)						\
@@ -222,10 +225,29 @@ static struct attribute *armv8_pmuv3_event_attrs[] = {
 	ARMV8_EVENT_ATTR(ll_cache_rd, ARMV8_PMUV3_PERFCTR_LL_CACHE_RD),
 	ARMV8_EVENT_ATTR(ll_cache_miss_rd, ARMV8_PMUV3_PERFCTR_LL_CACHE_MISS_RD),
 	ARMV8_EVENT_ATTR(remote_access_rd, ARMV8_PMUV3_PERFCTR_REMOTE_ACCESS_RD),
+	ARMV8_EVENT_ATTR(l1d_cache_lmiss_rd, ARMV8_PMUV3_PERFCTR_L1D_CACHE_LMISS_RD),
+	ARMV8_EVENT_ATTR(op_retired, ARMV8_PMUV3_PERFCTR_OP_RETIRED),
+	ARMV8_EVENT_ATTR(op_spec, ARMV8_PMUV3_PERFCTR_OP_SPEC),
+	ARMV8_EVENT_ATTR(stall, ARMV8_PMUV3_PERFCTR_STALL),
+	ARMV8_EVENT_ATTR(stall_slot_backend, ARMV8_PMUV3_PERFCTR_STALL_SLOT_BACKEND),
+	ARMV8_EVENT_ATTR(stall_slot_frontend, ARMV8_PMUV3_PERFCTR_STALL_SLOT_FRONTEND),
+	ARMV8_EVENT_ATTR(stall_slot, ARMV8_PMUV3_PERFCTR_STALL_SLOT),
 	ARMV8_EVENT_ATTR(sample_pop, ARMV8_SPE_PERFCTR_SAMPLE_POP),
 	ARMV8_EVENT_ATTR(sample_feed, ARMV8_SPE_PERFCTR_SAMPLE_FEED),
 	ARMV8_EVENT_ATTR(sample_filtrate, ARMV8_SPE_PERFCTR_SAMPLE_FILTRATE),
 	ARMV8_EVENT_ATTR(sample_collision, ARMV8_SPE_PERFCTR_SAMPLE_COLLISION),
+	ARMV8_EVENT_ATTR(cnt_cycles, ARMV8_AMU_PERFCTR_CNT_CYCLES),
+	ARMV8_EVENT_ATTR(stall_backend_mem, ARMV8_AMU_PERFCTR_STALL_BACKEND_MEM),
+	ARMV8_EVENT_ATTR(l1i_cache_lmiss, ARMV8_PMUV3_PERFCTR_L1I_CACHE_LMISS),
+	ARMV8_EVENT_ATTR(l2d_cache_lmiss_rd, ARMV8_PMUV3_PERFCTR_L2D_CACHE_LMISS_RD),
+	ARMV8_EVENT_ATTR(l2i_cache_lmiss, ARMV8_PMUV3_PERFCTR_L2I_CACHE_LMISS),
+	ARMV8_EVENT_ATTR(l3d_cache_lmiss_rd, ARMV8_PMUV3_PERFCTR_L3D_CACHE_LMISS_RD),
+	ARMV8_EVENT_ATTR(ldst_align_lat, ARMV8_PMUV3_PERFCTR_LDST_ALIGN_LAT),
+	ARMV8_EVENT_ATTR(ld_align_lat, ARMV8_PMUV3_PERFCTR_LD_ALIGN_LAT),
+	ARMV8_EVENT_ATTR(st_align_lat, ARMV8_PMUV3_PERFCTR_ST_ALIGN_LAT),
+	ARMV8_EVENT_ATTR(mem_access_checked, ARMV8_MTE_PERFCTR_MEM_ACCESS_CHECKED),
+	ARMV8_EVENT_ATTR(mem_access_checked_rd, ARMV8_MTE_PERFCTR_MEM_ACCESS_CHECKED_RD),
+	ARMV8_EVENT_ATTR(mem_access_checked_wr, ARMV8_MTE_PERFCTR_MEM_ACCESS_CHECKED_WR),
 	NULL,
 };
 
@@ -244,10 +266,13 @@ armv8pmu_event_attr_is_visible(struct kobject *kobj,
 	    test_bit(pmu_attr->id, cpu_pmu->pmceid_bitmap))
 		return attr->mode;
 
-	pmu_attr->id -= ARMV8_PMUV3_EXT_COMMON_EVENT_BASE;
-	if (pmu_attr->id < ARMV8_PMUV3_MAX_COMMON_EVENTS &&
-	    test_bit(pmu_attr->id, cpu_pmu->pmceid_ext_bitmap))
-		return attr->mode;
+	if (pmu_attr->id >= ARMV8_PMUV3_EXT_COMMON_EVENT_BASE) {
+		u64 id = pmu_attr->id - ARMV8_PMUV3_EXT_COMMON_EVENT_BASE;
+
+		if (id < ARMV8_PMUV3_MAX_COMMON_EVENTS &&
+		    test_bit(id, cpu_pmu->pmceid_ext_bitmap))
+			return attr->mode;
+	}
 
 	return 0;
 }
@@ -1165,28 +1190,54 @@ device_initcall(armv8_pmu_driver_init)
 void arch_perf_update_userpage(struct perf_event *event,
 			       struct perf_event_mmap_page *userpg, u64 now)
 {
-	u32 freq;
-	u32 shift;
+	struct clock_read_data *rd;
+	unsigned int seq;
+	u64 ns;
 
-	/*
-	 * Internal timekeeping for enabled/running/stopped times
-	 * is always computed with the sched_clock.
-	 */
-	freq = arch_timer_get_rate();
-	userpg->cap_user_time = 1;
+	userpg->cap_user_time = 0;
+	userpg->cap_user_time_zero = 0;
+	userpg->cap_user_time_short = 0;
+
+	do {
+		rd = sched_clock_read_begin(&seq);
+
+		if (rd->read_sched_clock != arch_timer_read_counter)
+			return;
+
+		userpg->time_mult = rd->mult;
+		userpg->time_shift = rd->shift;
+		userpg->time_zero = rd->epoch_ns;
+		userpg->time_cycles = rd->epoch_cyc;
+		userpg->time_mask = rd->sched_clock_mask;
+
+		/*
+		 * Subtract the cycle base, such that software that
+		 * doesn't know about cap_user_time_short still 'works'
+		 * assuming no wraps.
+		 */
+		ns = mul_u64_u32_shr(rd->epoch_cyc, rd->mult, rd->shift);
+		userpg->time_zero -= ns;
+
+	} while (sched_clock_read_retry(seq));
+
+	userpg->time_offset = userpg->time_zero - now;
 
-	clocks_calc_mult_shift(&userpg->time_mult, &shift, freq,
-			NSEC_PER_SEC, 0);
 	/*
 	 * time_shift is not expected to be greater than 31 due to
 	 * the original published conversion algorithm shifting a
 	 * 32-bit value (now specifies a 64-bit value) - refer
 	 * perf_event_mmap_page documentation in perf_event.h.
 	 */
-	if (shift == 32) {
-		shift = 31;
+	if (userpg->time_shift == 32) {
+		userpg->time_shift = 31;
 		userpg->time_mult >>= 1;
 	}
-	userpg->time_shift = (u16)shift;
-	userpg->time_offset = -now;
+
+	/*
+	 * Internal timekeeping for enabled/running/stopped times
+	 * is always computed with the sched_clock.
+	 */
+	userpg->cap_user_time = 1;
+	userpg->cap_user_time_zero = 1;
+	userpg->cap_user_time_short = 1;
 }
diff --git a/arch/arm64/kernel/perf_regs.c b/arch/arm64/kernel/perf_regs.c
index 0bbac612146e..666b225aeb3a 100644
--- a/arch/arm64/kernel/perf_regs.c
+++ b/arch/arm64/kernel/perf_regs.c
@@ -15,15 +15,34 @@ u64 perf_reg_value(struct pt_regs *regs, int idx)
 		return 0;
 
 	/*
-	 * Compat (i.e. 32 bit) mode:
-	 * - PC has been set in the pt_regs struct in kernel_entry,
-	 * - Handle SP and LR here.
+	 * Our handling of compat tasks (PERF_SAMPLE_REGS_ABI_32) is weird, but
+	 * we're stuck with it for ABI compatability reasons.
+	 *
+	 * For a 32-bit consumer inspecting a 32-bit task, then it will look at
+	 * the first 16 registers (see arch/arm/include/uapi/asm/perf_regs.h).
+	 * These correspond directly to a prefix of the registers saved in our
+	 * 'struct pt_regs', with the exception of the PC, so we copy that down
+	 * (x15 corresponds to SP_hyp in the architecture).
+	 *
+	 * So far, so good.
+	 *
+	 * The oddity arises when a 64-bit consumer looks at a 32-bit task and
+	 * asks for registers beyond PERF_REG_ARM_MAX. In this case, we return
+	 * SP_usr, LR_usr and PC in the positions where the AArch64 SP, LR and
+	 * PC registers would normally live. The initial idea was to allow a
+	 * 64-bit unwinder to unwind a 32-bit task and, although it's not clear
+	 * how well that works in practice, somebody might be relying on it.
+	 *
+	 * At the time we make a sample, we don't know whether the consumer is
+	 * 32-bit or 64-bit, so we have to cater for both possibilities.
 	 */
 	if (compat_user_mode(regs)) {
 		if ((u32)idx == PERF_REG_ARM64_SP)
 			return regs->compat_sp;
 		if ((u32)idx == PERF_REG_ARM64_LR)
 			return regs->compat_lr;
+		if (idx == 15)
+			return regs->pc;
 	}
 
 	if ((u32)idx == PERF_REG_ARM64_SP)
diff --git a/arch/arm64/kernel/probes/kprobes.c b/arch/arm64/kernel/probes/kprobes.c
index d1c95dcf1d78..5290f17a4d80 100644
--- a/arch/arm64/kernel/probes/kprobes.c
+++ b/arch/arm64/kernel/probes/kprobes.c
@@ -120,15 +120,9 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p)
 
 void *alloc_insn_page(void)
 {
-	void *page;
-
-	page = vmalloc_exec(PAGE_SIZE);
-	if (page) {
-		set_memory_ro((unsigned long)page, 1);
-		set_vm_flush_reset_perms(page);
-	}
-
-	return page;
+	return __vmalloc_node_range(PAGE_SIZE, 1, VMALLOC_START, VMALLOC_END,
+			GFP_KERNEL, PAGE_KERNEL_ROX, VM_FLUSH_RESET_PERMS,
+			NUMA_NO_NODE, __builtin_return_address(0));
 }
 
 /* arm kprobe: install breakpoint in text */
diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c
index 6089638c7d43..84ec630b8ab5 100644
--- a/arch/arm64/kernel/process.c
+++ b/arch/arm64/kernel/process.c
@@ -375,7 +375,7 @@ int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
 
 asmlinkage void ret_from_fork(void) asm("ret_from_fork");
 
-int copy_thread_tls(unsigned long clone_flags, unsigned long stack_start,
+int copy_thread(unsigned long clone_flags, unsigned long stack_start,
 		unsigned long stk_sz, struct task_struct *p, unsigned long tls)
 {
 	struct pt_regs *childregs = task_pt_regs(p);
diff --git a/arch/arm64/kernel/ptrace.c b/arch/arm64/kernel/ptrace.c
index 68b7f34a08f5..1e02e98e68dd 100644
--- a/arch/arm64/kernel/ptrace.c
+++ b/arch/arm64/kernel/ptrace.c
@@ -1811,19 +1811,42 @@ static void tracehook_report_syscall(struct pt_regs *regs,
 	unsigned long saved_reg;
 
 	/*
-	 * A scratch register (ip(r12) on AArch32, x7 on AArch64) is
-	 * used to denote syscall entry/exit:
+	 * We have some ABI weirdness here in the way that we handle syscall
+	 * exit stops because we indicate whether or not the stop has been
+	 * signalled from syscall entry or syscall exit by clobbering a general
+	 * purpose register (ip/r12 for AArch32, x7 for AArch64) in the tracee
+	 * and restoring its old value after the stop. This means that:
+	 *
+	 * - Any writes by the tracer to this register during the stop are
+	 *   ignored/discarded.
+	 *
+	 * - The actual value of the register is not available during the stop,
+	 *   so the tracer cannot save it and restore it later.
+	 *
+	 * - Syscall stops behave differently to seccomp and pseudo-step traps
+	 *   (the latter do not nobble any registers).
 	 */
 	regno = (is_compat_task() ? 12 : 7);
 	saved_reg = regs->regs[regno];
 	regs->regs[regno] = dir;
 
-	if (dir == PTRACE_SYSCALL_EXIT)
+	if (dir == PTRACE_SYSCALL_ENTER) {
+		if (tracehook_report_syscall_entry(regs))
+			forget_syscall(regs);
+		regs->regs[regno] = saved_reg;
+	} else if (!test_thread_flag(TIF_SINGLESTEP)) {
 		tracehook_report_syscall_exit(regs, 0);
-	else if (tracehook_report_syscall_entry(regs))
-		forget_syscall(regs);
+		regs->regs[regno] = saved_reg;
+	} else {
+		regs->regs[regno] = saved_reg;
 
-	regs->regs[regno] = saved_reg;
+		/*
+		 * Signal a pseudo-step exception since we are stepping but
+		 * tracer modifications to the registers may have rewound the
+		 * state machine.
+		 */
+		tracehook_report_syscall_exit(regs, 1);
+	}
 }
 
 int syscall_trace_enter(struct pt_regs *regs)
@@ -1833,12 +1856,12 @@ int syscall_trace_enter(struct pt_regs *regs)
 	if (flags & (_TIF_SYSCALL_EMU | _TIF_SYSCALL_TRACE)) {
 		tracehook_report_syscall(regs, PTRACE_SYSCALL_ENTER);
 		if (!in_syscall(regs) || (flags & _TIF_SYSCALL_EMU))
-			return -1;
+			return NO_SYSCALL;
 	}
 
 	/* Do the secure computing after ptrace; failures should be fast. */
 	if (secure_computing() == -1)
-		return -1;
+		return NO_SYSCALL;
 
 	if (test_thread_flag(TIF_SYSCALL_TRACEPOINT))
 		trace_sys_enter(regs, regs->syscallno);
@@ -1851,12 +1874,14 @@ int syscall_trace_enter(struct pt_regs *regs)
 
 void syscall_trace_exit(struct pt_regs *regs)
 {
+	unsigned long flags = READ_ONCE(current_thread_info()->flags);
+
 	audit_syscall_exit(regs);
 
-	if (test_thread_flag(TIF_SYSCALL_TRACEPOINT))
+	if (flags & _TIF_SYSCALL_TRACEPOINT)
 		trace_sys_exit(regs, regs_return_value(regs));
 
-	if (test_thread_flag(TIF_SYSCALL_TRACE))
+	if (flags & (_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP))
 		tracehook_report_syscall(regs, PTRACE_SYSCALL_EXIT);
 
 	rseq_syscall(regs);
@@ -1934,8 +1959,8 @@ static int valid_native_regs(struct user_pt_regs *regs)
  */
 int valid_user_regs(struct user_pt_regs *regs, struct task_struct *task)
 {
-	if (!test_tsk_thread_flag(task, TIF_SINGLESTEP))
-		regs->pstate &= ~DBG_SPSR_SS;
+	/* https://lore.kernel.org/lkml/20191118131525.GA4180@willie-the-truck */
+	user_regs_reset_single_step(regs, task);
 
 	if (is_compat_thread(task_thread_info(task)))
 		return valid_compat_regs(regs);
diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c
index 93b3844cf442..c793276ec7ad 100644
--- a/arch/arm64/kernel/setup.c
+++ b/arch/arm64/kernel/setup.c
@@ -400,11 +400,7 @@ static int __init topology_init(void)
 }
 subsys_initcall(topology_init);
 
-/*
- * Dump out kernel offset information on panic.
- */
-static int dump_kernel_offset(struct notifier_block *self, unsigned long v,
-			      void *p)
+static void dump_kernel_offset(void)
 {
 	const unsigned long offset = kaslr_offset();
 
@@ -415,17 +411,25 @@ static int dump_kernel_offset(struct notifier_block *self, unsigned long v,
 	} else {
 		pr_emerg("Kernel Offset: disabled\n");
 	}
+}
+
+static int arm64_panic_block_dump(struct notifier_block *self,
+				  unsigned long v, void *p)
+{
+	dump_kernel_offset();
+	dump_cpu_features();
+	dump_mem_limit();
 	return 0;
 }
 
-static struct notifier_block kernel_offset_notifier = {
-	.notifier_call = dump_kernel_offset
+static struct notifier_block arm64_panic_block = {
+	.notifier_call = arm64_panic_block_dump
 };
 
-static int __init register_kernel_offset_dumper(void)
+static int __init register_arm64_panic_block(void)
 {
 	atomic_notifier_chain_register(&panic_notifier_list,
-				       &kernel_offset_notifier);
+				       &arm64_panic_block);
 	return 0;
 }
-__initcall(register_kernel_offset_dumper);
+device_initcall(register_arm64_panic_block);
diff --git a/arch/arm64/kernel/signal.c b/arch/arm64/kernel/signal.c
index 801d56cdf701..3b4f31f35e45 100644
--- a/arch/arm64/kernel/signal.c
+++ b/arch/arm64/kernel/signal.c
@@ -800,7 +800,6 @@ static void setup_restart_syscall(struct pt_regs *regs)
  */
 static void handle_signal(struct ksignal *ksig, struct pt_regs *regs)
 {
-	struct task_struct *tsk = current;
 	sigset_t *oldset = sigmask_to_save();
 	int usig = ksig->sig;
 	int ret;
@@ -824,14 +823,8 @@ static void handle_signal(struct ksignal *ksig, struct pt_regs *regs)
 	 */
 	ret |= !valid_user_regs(&regs->user_regs, current);
 
-	/*
-	 * Fast forward the stepping logic so we step into the signal
-	 * handler.
-	 */
-	if (!ret)
-		user_fastforward_single_step(tsk);
-
-	signal_setup_done(ret, ksig, 0);
+	/* Step into the signal handler if we are stepping */
+	signal_setup_done(ret, ksig, test_thread_flag(TIF_SINGLESTEP));
 }
 
 /*
diff --git a/arch/arm64/kernel/signal32.c b/arch/arm64/kernel/signal32.c
index 82feca6f7052..2f507f565c48 100644
--- a/arch/arm64/kernel/signal32.c
+++ b/arch/arm64/kernel/signal32.c
@@ -342,38 +342,13 @@ static void compat_setup_return(struct pt_regs *regs, struct k_sigaction *ka,
 		retcode = ptr_to_compat(ka->sa.sa_restorer);
 	} else {
 		/* Set up sigreturn pointer */
-#ifdef CONFIG_COMPAT_VDSO
-		void *vdso_base = current->mm->context.vdso;
-		void *vdso_trampoline;
-
-		if (ka->sa.sa_flags & SA_SIGINFO) {
-			if (thumb) {
-				vdso_trampoline = VDSO_SYMBOL(vdso_base,
-							compat_rt_sigreturn_thumb);
-			} else {
-				vdso_trampoline = VDSO_SYMBOL(vdso_base,
-							compat_rt_sigreturn_arm);
-			}
-		} else {
-			if (thumb) {
-				vdso_trampoline = VDSO_SYMBOL(vdso_base,
-							compat_sigreturn_thumb);
-			} else {
-				vdso_trampoline = VDSO_SYMBOL(vdso_base,
-							compat_sigreturn_arm);
-			}
-		}
-
-		retcode = ptr_to_compat(vdso_trampoline) + thumb;
-#else
 		unsigned int idx = thumb << 1;
 
 		if (ka->sa.sa_flags & SA_SIGINFO)
 			idx += 3;
 
-		retcode = (unsigned long)current->mm->context.vdso +
+		retcode = (unsigned long)current->mm->context.sigpage +
 			  (idx << 2) + thumb;
-#endif
 	}
 
 	regs->regs[0]	= usig;
diff --git a/arch/arm64/kernel/stacktrace.c b/arch/arm64/kernel/stacktrace.c
index 139679c745bf..2dd8e3b8b94b 100644
--- a/arch/arm64/kernel/stacktrace.c
+++ b/arch/arm64/kernel/stacktrace.c
@@ -199,12 +199,12 @@ static noinline void __save_stack_trace(struct task_struct *tsk,
 
 	put_task_stack(tsk);
 }
-EXPORT_SYMBOL_GPL(save_stack_trace_tsk);
 
 void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
 {
 	__save_stack_trace(tsk, trace, 1);
 }
+EXPORT_SYMBOL_GPL(save_stack_trace_tsk);
 
 void save_stack_trace(struct stack_trace *trace)
 {
diff --git a/arch/arm64/kernel/syscall.c b/arch/arm64/kernel/syscall.c
index 5f5b868292f5..5f0c04863d2c 100644
--- a/arch/arm64/kernel/syscall.c
+++ b/arch/arm64/kernel/syscall.c
@@ -50,6 +50,9 @@ static void invoke_syscall(struct pt_regs *regs, unsigned int scno,
 		ret = do_ni_syscall(regs, scno);
 	}
 
+	if (is_compat_task())
+		ret = lower_32_bits(ret);
+
 	regs->regs[0] = ret;
 }
 
@@ -121,7 +124,21 @@ static void el0_svc_common(struct pt_regs *regs, int scno, int sc_nr,
 	user_exit();
 
 	if (has_syscall_work(flags)) {
-		/* set default errno for user-issued syscall(-1) */
+		/*
+		 * The de-facto standard way to skip a system call using ptrace
+		 * is to set the system call to -1 (NO_SYSCALL) and set x0 to a
+		 * suitable error code for consumption by userspace. However,
+		 * this cannot be distinguished from a user-issued syscall(-1)
+		 * and so we must set x0 to -ENOSYS here in case the tracer doesn't
+		 * issue the skip and we fall into trace_exit with x0 preserved.
+		 *
+		 * This is slightly odd because it also means that if a tracer
+		 * sets the system call number to -1 but does not initialise x0,
+		 * then x0 will be preserved for all system calls apart from a
+		 * user-issued syscall(-1). However, requesting a skip and not
+		 * setting the return value is unlikely to do anything sensible
+		 * anyway.
+		 */
 		if (scno == NO_SYSCALL)
 			regs->regs[0] = -ENOSYS;
 		scno = syscall_trace_enter(regs);
@@ -139,7 +156,7 @@ static void el0_svc_common(struct pt_regs *regs, int scno, int sc_nr,
 	if (!has_syscall_work(flags) && !IS_ENABLED(CONFIG_DEBUG_RSEQ)) {
 		local_daif_mask();
 		flags = current_thread_info()->flags;
-		if (!has_syscall_work(flags)) {
+		if (!has_syscall_work(flags) && !(flags & _TIF_SINGLESTEP)) {
 			/*
 			 * We're off to userspace, where interrupts are
 			 * always enabled after we restore the flags from
diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c
index 50cc30acf106..13ebd5ca2070 100644
--- a/arch/arm64/kernel/traps.c
+++ b/arch/arm64/kernel/traps.c
@@ -376,7 +376,7 @@ static int call_undef_hook(struct pt_regs *regs)
 
 	if (!user_mode(regs)) {
 		__le32 instr_le;
-		if (probe_kernel_address((__force __le32 *)pc, instr_le))
+		if (get_kernel_nofault(instr_le, (__force __le32 *)pc))
 			goto exit;
 		instr = le32_to_cpu(instr_le);
 	} else if (compat_thumb_mode(regs)) {
@@ -813,6 +813,7 @@ asmlinkage void bad_mode(struct pt_regs *regs, int reason, unsigned int esr)
 		handler[reason], smp_processor_id(), esr,
 		esr_get_class_string(esr));
 
+	__show_regs(regs);
 	local_daif_mask();
 	panic("bad mode");
 }
@@ -854,7 +855,7 @@ asmlinkage void handle_bad_stack(struct pt_regs *regs)
 	pr_emerg("Task stack:     [0x%016lx..0x%016lx]\n",
 		 tsk_stk, tsk_stk + THREAD_SIZE);
 	pr_emerg("IRQ stack:      [0x%016lx..0x%016lx]\n",
-		 irq_stk, irq_stk + THREAD_SIZE);
+		 irq_stk, irq_stk + IRQ_STACK_SIZE);
 	pr_emerg("Overflow stack: [0x%016lx..0x%016lx]\n",
 		 ovf_stk, ovf_stk + OVERFLOW_STACK_SIZE);
 
diff --git a/arch/arm64/kernel/vdso.c b/arch/arm64/kernel/vdso.c
index 4e016574bd91..d4202a32abc9 100644
--- a/arch/arm64/kernel/vdso.c
+++ b/arch/arm64/kernel/vdso.c
@@ -18,6 +18,7 @@
 #include <linux/sched.h>
 #include <linux/signal.h>
 #include <linux/slab.h>
+#include <linux/time_namespace.h>
 #include <linux/timekeeper_internal.h>
 #include <linux/vmalloc.h>
 #include <vdso/datapage.h>
@@ -40,6 +41,12 @@ enum vdso_abi {
 #endif /* CONFIG_COMPAT_VDSO */
 };
 
+enum vvar_pages {
+	VVAR_DATA_PAGE_OFFSET,
+	VVAR_TIMENS_PAGE_OFFSET,
+	VVAR_NR_PAGES,
+};
+
 struct vdso_abi_info {
 	const char *name;
 	const char *vdso_code_start;
@@ -107,25 +114,122 @@ static int __vdso_init(enum vdso_abi abi)
 			vdso_info[abi].vdso_code_start) >>
 			PAGE_SHIFT;
 
-	/* Allocate the vDSO pagelist, plus a page for the data. */
-	vdso_pagelist = kcalloc(vdso_info[abi].vdso_pages + 1,
+	vdso_pagelist = kcalloc(vdso_info[abi].vdso_pages,
 				sizeof(struct page *),
 				GFP_KERNEL);
 	if (vdso_pagelist == NULL)
 		return -ENOMEM;
 
-	/* Grab the vDSO data page. */
-	vdso_pagelist[0] = phys_to_page(__pa_symbol(vdso_data));
-
-
 	/* Grab the vDSO code pages. */
 	pfn = sym_to_pfn(vdso_info[abi].vdso_code_start);
 
 	for (i = 0; i < vdso_info[abi].vdso_pages; i++)
-		vdso_pagelist[i + 1] = pfn_to_page(pfn + i);
+		vdso_pagelist[i] = pfn_to_page(pfn + i);
+
+	vdso_info[abi].cm->pages = vdso_pagelist;
+
+	return 0;
+}
+
+#ifdef CONFIG_TIME_NS
+struct vdso_data *arch_get_vdso_data(void *vvar_page)
+{
+	return (struct vdso_data *)(vvar_page);
+}
+
+/*
+ * The vvar mapping contains data for a specific time namespace, so when a task
+ * changes namespace we must unmap its vvar data for the old namespace.
+ * Subsequent faults will map in data for the new namespace.
+ *
+ * For more details see timens_setup_vdso_data().
+ */
+int vdso_join_timens(struct task_struct *task, struct time_namespace *ns)
+{
+	struct mm_struct *mm = task->mm;
+	struct vm_area_struct *vma;
+
+	mmap_read_lock(mm);
+
+	for (vma = mm->mmap; vma; vma = vma->vm_next) {
+		unsigned long size = vma->vm_end - vma->vm_start;
+
+		if (vma_is_special_mapping(vma, vdso_info[VDSO_ABI_AA64].dm))
+			zap_page_range(vma, vma->vm_start, size);
+#ifdef CONFIG_COMPAT_VDSO
+		if (vma_is_special_mapping(vma, vdso_info[VDSO_ABI_AA32].dm))
+			zap_page_range(vma, vma->vm_start, size);
+#endif
+	}
+
+	mmap_read_unlock(mm);
+	return 0;
+}
+
+static struct page *find_timens_vvar_page(struct vm_area_struct *vma)
+{
+	if (likely(vma->vm_mm == current->mm))
+		return current->nsproxy->time_ns->vvar_page;
+
+	/*
+	 * VM_PFNMAP | VM_IO protect .fault() handler from being called
+	 * through interfaces like /proc/$pid/mem or
+	 * process_vm_{readv,writev}() as long as there's no .access()
+	 * in special_mapping_vmops.
+	 * For more details check_vma_flags() and __access_remote_vm()
+	 */
+	WARN(1, "vvar_page accessed remotely");
+
+	return NULL;
+}
+#else
+static struct page *find_timens_vvar_page(struct vm_area_struct *vma)
+{
+	return NULL;
+}
+#endif
 
-	vdso_info[abi].dm->pages = &vdso_pagelist[0];
-	vdso_info[abi].cm->pages = &vdso_pagelist[1];
+static vm_fault_t vvar_fault(const struct vm_special_mapping *sm,
+			     struct vm_area_struct *vma, struct vm_fault *vmf)
+{
+	struct page *timens_page = find_timens_vvar_page(vma);
+	unsigned long pfn;
+
+	switch (vmf->pgoff) {
+	case VVAR_DATA_PAGE_OFFSET:
+		if (timens_page)
+			pfn = page_to_pfn(timens_page);
+		else
+			pfn = sym_to_pfn(vdso_data);
+		break;
+#ifdef CONFIG_TIME_NS
+	case VVAR_TIMENS_PAGE_OFFSET:
+		/*
+		 * If a task belongs to a time namespace then a namespace
+		 * specific VVAR is mapped with the VVAR_DATA_PAGE_OFFSET and
+		 * the real VVAR page is mapped with the VVAR_TIMENS_PAGE_OFFSET
+		 * offset.
+		 * See also the comment near timens_setup_vdso_data().
+		 */
+		if (!timens_page)
+			return VM_FAULT_SIGBUS;
+		pfn = sym_to_pfn(vdso_data);
+		break;
+#endif /* CONFIG_TIME_NS */
+	default:
+		return VM_FAULT_SIGBUS;
+	}
+
+	return vmf_insert_pfn(vma, vmf->address, pfn);
+}
+
+static int vvar_mremap(const struct vm_special_mapping *sm,
+		       struct vm_area_struct *new_vma)
+{
+	unsigned long new_size = new_vma->vm_end - new_vma->vm_start;
+
+	if (new_size != VVAR_NR_PAGES * PAGE_SIZE)
+		return -EINVAL;
 
 	return 0;
 }
@@ -139,9 +243,11 @@ static int __setup_additional_pages(enum vdso_abi abi,
 	unsigned long gp_flags = 0;
 	void *ret;
 
+	BUILD_BUG_ON(VVAR_NR_PAGES != __VVAR_PAGES);
+
 	vdso_text_len = vdso_info[abi].vdso_pages << PAGE_SHIFT;
 	/* Be sure to map the data page */
-	vdso_mapping_len = vdso_text_len + PAGE_SIZE;
+	vdso_mapping_len = vdso_text_len + VVAR_NR_PAGES * PAGE_SIZE;
 
 	vdso_base = get_unmapped_area(NULL, 0, vdso_mapping_len, 0, 0);
 	if (IS_ERR_VALUE(vdso_base)) {
@@ -149,8 +255,8 @@ static int __setup_additional_pages(enum vdso_abi abi,
 		goto up_fail;
 	}
 
-	ret = _install_special_mapping(mm, vdso_base, PAGE_SIZE,
-				       VM_READ|VM_MAYREAD,
+	ret = _install_special_mapping(mm, vdso_base, VVAR_NR_PAGES * PAGE_SIZE,
+				       VM_READ|VM_MAYREAD|VM_PFNMAP,
 				       vdso_info[abi].dm);
 	if (IS_ERR(ret))
 		goto up_fail;
@@ -158,7 +264,7 @@ static int __setup_additional_pages(enum vdso_abi abi,
 	if (IS_ENABLED(CONFIG_ARM64_BTI_KERNEL) && system_supports_bti())
 		gp_flags = VM_ARM64_BTI;
 
-	vdso_base += PAGE_SIZE;
+	vdso_base += VVAR_NR_PAGES * PAGE_SIZE;
 	mm->context.vdso = (void *)vdso_base;
 	ret = _install_special_mapping(mm, vdso_base, vdso_text_len,
 				       VM_READ|VM_EXEC|gp_flags|
@@ -191,15 +297,12 @@ enum aarch32_map {
 #ifdef CONFIG_COMPAT_VDSO
 	AA32_MAP_VVAR,
 	AA32_MAP_VDSO,
-#else
-	AA32_MAP_SIGPAGE
 #endif
+	AA32_MAP_SIGPAGE
 };
 
 static struct page *aarch32_vectors_page __ro_after_init;
-#ifndef CONFIG_COMPAT_VDSO
 static struct page *aarch32_sig_page __ro_after_init;
-#endif
 
 static struct vm_special_mapping aarch32_vdso_maps[] = {
 	[AA32_MAP_VECTORS] = {
@@ -209,17 +312,18 @@ static struct vm_special_mapping aarch32_vdso_maps[] = {
 #ifdef CONFIG_COMPAT_VDSO
 	[AA32_MAP_VVAR] = {
 		.name = "[vvar]",
+		.fault = vvar_fault,
+		.mremap = vvar_mremap,
 	},
 	[AA32_MAP_VDSO] = {
 		.name = "[vdso]",
 		.mremap = aarch32_vdso_mremap,
 	},
-#else
+#endif /* CONFIG_COMPAT_VDSO */
 	[AA32_MAP_SIGPAGE] = {
 		.name	= "[sigpage]", /* ABI */
 		.pages	= &aarch32_sig_page,
 	},
-#endif /* CONFIG_COMPAT_VDSO */
 };
 
 static int aarch32_alloc_kuser_vdso_page(void)
@@ -242,27 +346,11 @@ static int aarch32_alloc_kuser_vdso_page(void)
 	return 0;
 }
 
-#ifdef CONFIG_COMPAT_VDSO
-static int __aarch32_alloc_vdso_pages(void)
-{
-	int ret;
-
-	vdso_info[VDSO_ABI_AA32].dm = &aarch32_vdso_maps[AA32_MAP_VVAR];
-	vdso_info[VDSO_ABI_AA32].cm = &aarch32_vdso_maps[AA32_MAP_VDSO];
-
-	ret = __vdso_init(VDSO_ABI_AA32);
-	if (ret)
-		return ret;
-
-	return aarch32_alloc_kuser_vdso_page();
-}
-#else
-static int __aarch32_alloc_vdso_pages(void)
+static int aarch32_alloc_sigpage(void)
 {
 	extern char __aarch32_sigret_code_start[], __aarch32_sigret_code_end[];
 	int sigret_sz = __aarch32_sigret_code_end - __aarch32_sigret_code_start;
 	unsigned long sigpage;
-	int ret;
 
 	sigpage = get_zeroed_page(GFP_ATOMIC);
 	if (!sigpage)
@@ -271,18 +359,34 @@ static int __aarch32_alloc_vdso_pages(void)
 	memcpy((void *)sigpage, __aarch32_sigret_code_start, sigret_sz);
 	aarch32_sig_page = virt_to_page(sigpage);
 	flush_dcache_page(aarch32_sig_page);
+	return 0;
+}
 
-	ret = aarch32_alloc_kuser_vdso_page();
-	if (ret)
-		free_page(sigpage);
+#ifdef CONFIG_COMPAT_VDSO
+static int __aarch32_alloc_vdso_pages(void)
+{
+	vdso_info[VDSO_ABI_AA32].dm = &aarch32_vdso_maps[AA32_MAP_VVAR];
+	vdso_info[VDSO_ABI_AA32].cm = &aarch32_vdso_maps[AA32_MAP_VDSO];
 
-	return ret;
+	return __vdso_init(VDSO_ABI_AA32);
 }
 #endif /* CONFIG_COMPAT_VDSO */
 
 static int __init aarch32_alloc_vdso_pages(void)
 {
-	return __aarch32_alloc_vdso_pages();
+	int ret;
+
+#ifdef CONFIG_COMPAT_VDSO
+	ret = __aarch32_alloc_vdso_pages();
+	if (ret)
+		return ret;
+#endif
+
+	ret = aarch32_alloc_sigpage();
+	if (ret)
+		return ret;
+
+	return aarch32_alloc_kuser_vdso_page();
 }
 arch_initcall(aarch32_alloc_vdso_pages);
 
@@ -305,7 +409,6 @@ static int aarch32_kuser_helpers_setup(struct mm_struct *mm)
 	return PTR_ERR_OR_ZERO(ret);
 }
 
-#ifndef CONFIG_COMPAT_VDSO
 static int aarch32_sigreturn_setup(struct mm_struct *mm)
 {
 	unsigned long addr;
@@ -328,12 +431,11 @@ static int aarch32_sigreturn_setup(struct mm_struct *mm)
 	if (IS_ERR(ret))
 		goto out;
 
-	mm->context.vdso = (void *)addr;
+	mm->context.sigpage = (void *)addr;
 
 out:
 	return PTR_ERR_OR_ZERO(ret);
 }
-#endif /* !CONFIG_COMPAT_VDSO */
 
 int aarch32_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
 {
@@ -352,10 +454,11 @@ int aarch32_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
 				       mm,
 				       bprm,
 				       uses_interp);
-#else
-	ret = aarch32_sigreturn_setup(mm);
+	if (ret)
+		goto out;
 #endif /* CONFIG_COMPAT_VDSO */
 
+	ret = aarch32_sigreturn_setup(mm);
 out:
 	mmap_write_unlock(mm);
 	return ret;
@@ -376,6 +479,8 @@ enum aarch64_map {
 static struct vm_special_mapping aarch64_vdso_maps[] __ro_after_init = {
 	[AA64_MAP_VVAR] = {
 		.name	= "[vvar]",
+		.fault = vvar_fault,
+		.mremap = vvar_mremap,
 	},
 	[AA64_MAP_VDSO] = {
 		.name	= "[vdso]",
diff --git a/arch/arm64/kernel/vdso/Makefile b/arch/arm64/kernel/vdso/Makefile
index 556d424c6f52..45d5cfe46429 100644
--- a/arch/arm64/kernel/vdso/Makefile
+++ b/arch/arm64/kernel/vdso/Makefile
@@ -23,13 +23,14 @@ btildflags-$(CONFIG_ARM64_BTI_KERNEL) += -z force-bti
 # potential future proofing if we end up with internal calls to the exported
 # routines, as x86 does (see 6f121e548f83 ("x86, vdso: Reimplement vdso.so
 # preparation in build-time C")).
-ldflags-y := -shared -nostdlib -soname=linux-vdso.so.1 --hash-style=sysv \
-		-Bsymbolic --eh-frame-hdr --build-id -n $(btildflags-y) -T
+ldflags-y := -shared -nostdlib -soname=linux-vdso.so.1 --hash-style=sysv	\
+	     -Bsymbolic $(call ld-option, --no-eh-frame-hdr) --build-id -n	\
+	     $(btildflags-y) -T
 
 ccflags-y := -fno-common -fno-builtin -fno-stack-protector -ffixed-x18
 ccflags-y += -DDISABLE_BRANCH_PROFILING
 
-CFLAGS_REMOVE_vgettimeofday.o = $(CC_FLAGS_FTRACE) -Os $(CC_FLAGS_SCS)
+CFLAGS_REMOVE_vgettimeofday.o = $(CC_FLAGS_FTRACE) -Os $(CC_FLAGS_SCS) $(GCC_PLUGINS_CFLAGS)
 KBUILD_CFLAGS			+= $(DISABLE_LTO)
 KASAN_SANITIZE			:= n
 UBSAN_SANITIZE			:= n
diff --git a/arch/arm64/kernel/vdso/sigreturn.S b/arch/arm64/kernel/vdso/sigreturn.S
index 620a3ef837b7..0e18729abc3b 100644
--- a/arch/arm64/kernel/vdso/sigreturn.S
+++ b/arch/arm64/kernel/vdso/sigreturn.S
@@ -18,29 +18,40 @@
 
 	.text
 
+/*
+ * NOTE!!!  You may notice that all of the .cfi directives in this file have
+ * been commented out. This is because they have been shown to trigger segfaults
+ * in libgcc when unwinding out of a SIGCANCEL handler to invoke pthread
+ * cleanup handlers during the thread cancellation dance. By omitting the
+ * directives, we trigger an arm64-specific fallback path in the unwinder which
+ * recognises the signal frame and restores many of the registers directly from
+ * the sigcontext. Re-enabling the cfi directives here therefore needs to be
+ * much more comprehensive to reduce the risk of further regressions.
+ */
+
 /* Ensure that the mysterious NOP can be associated with a function. */
-	.cfi_startproc
+//	.cfi_startproc
 
 /*
- * .cfi_signal_frame causes the corresponding Frame Description Entry in the
- * .eh_frame section to be annotated as a signal frame. This allows DWARF
- * unwinders (e.g. libstdc++) to implement _Unwind_GetIPInfo(), which permits
- * unwinding out of the signal trampoline without the need for the mysterious
- * NOP.
+ * .cfi_signal_frame causes the corresponding Frame Description Entry (FDE) in
+ * the .eh_frame section to be annotated as a signal frame. This allows DWARF
+ * unwinders (e.g. libstdc++) to implement _Unwind_GetIPInfo() and identify
+ * the next frame using the unmodified return address instead of subtracting 1,
+ * which may yield the wrong FDE.
  */
-	.cfi_signal_frame
+//	.cfi_signal_frame
 
 /*
  * Tell the unwinder where to locate the frame record linking back to the
- * interrupted context. We don't provide unwind info for registers other
- * than the frame pointer and the link register here; in practice, this
- * is sufficient for unwinding in C/C++ based runtimes and the values in
- * the sigcontext may have been modified by this point anyway. Debuggers
+ * interrupted context. We don't provide unwind info for registers other than
+ * the frame pointer and the link register here; in practice, this is likely to
+ * be insufficient for unwinding in C/C++ based runtimes, especially without a
+ * means to restore the stack pointer. Thankfully, unwinders and debuggers
  * already have baked-in strategies for attempting to unwind out of signals.
  */
-	.cfi_def_cfa    x29, 0
-	.cfi_offset     x29, 0 * 8
-	.cfi_offset     x30, 1 * 8
+//	.cfi_def_cfa    x29, 0
+//	.cfi_offset     x29, 0 * 8
+//	.cfi_offset     x30, 1 * 8
 
 /*
  * This mysterious NOP is required for some unwinders (e.g. libc++) that
@@ -51,16 +62,19 @@
 	nop	// Mysterious NOP
 
 /*
- * GDB relies on being able to identify the sigreturn instruction sequence to
- * unwind from signal handlers. We cannot, therefore, use SYM_FUNC_START()
- * here, as it will emit a BTI C instruction and break the unwinder. Thankfully,
- * this function is only ever called from a RET and so omitting the landing pad
- * is perfectly fine.
+ * GDB, libgcc and libunwind rely on being able to identify the sigreturn
+ * instruction sequence to unwind from signal handlers. We cannot, therefore,
+ * use SYM_FUNC_START() here, as it will emit a BTI C instruction and break the
+ * unwinder. Thankfully, this function is only ever called from a RET and so
+ * omitting the landing pad is perfectly fine.
  */
 SYM_CODE_START(__kernel_rt_sigreturn)
+//	PLEASE DO NOT MODIFY
 	mov	x8, #__NR_rt_sigreturn
+//	PLEASE DO NOT MODIFY
 	svc	#0
-	.cfi_endproc
+//	PLEASE DO NOT MODIFY
+//	.cfi_endproc
 SYM_CODE_END(__kernel_rt_sigreturn)
 
 emit_aarch64_feature_1_and
diff --git a/arch/arm64/kernel/vdso/vdso.lds.S b/arch/arm64/kernel/vdso/vdso.lds.S
index 7ad2d3a0cd48..d808ad31e01f 100644
--- a/arch/arm64/kernel/vdso/vdso.lds.S
+++ b/arch/arm64/kernel/vdso/vdso.lds.S
@@ -17,7 +17,10 @@ OUTPUT_ARCH(aarch64)
 
 SECTIONS
 {
-	PROVIDE(_vdso_data = . - PAGE_SIZE);
+	PROVIDE(_vdso_data = . - __VVAR_PAGES * PAGE_SIZE);
+#ifdef CONFIG_TIME_NS
+	PROVIDE(_timens_data = _vdso_data + PAGE_SIZE);
+#endif
 	. = VDSO_LBASE + SIZEOF_HEADERS;
 
 	.hash		: { *(.hash) }			:text
diff --git a/arch/arm64/kernel/vdso32/Makefile b/arch/arm64/kernel/vdso32/Makefile
index 7ea1e827e505..5139a5f19256 100644
--- a/arch/arm64/kernel/vdso32/Makefile
+++ b/arch/arm64/kernel/vdso32/Makefile
@@ -14,7 +14,7 @@ COMPAT_GCC_TOOLCHAIN_DIR := $(dir $(shell which $(CROSS_COMPILE_COMPAT)elfedit))
 COMPAT_GCC_TOOLCHAIN := $(realpath $(COMPAT_GCC_TOOLCHAIN_DIR)/..)
 
 CC_COMPAT_CLANG_FLAGS := --target=$(notdir $(CROSS_COMPILE_COMPAT:%-=%))
-CC_COMPAT_CLANG_FLAGS += --prefix=$(COMPAT_GCC_TOOLCHAIN_DIR)
+CC_COMPAT_CLANG_FLAGS += --prefix=$(COMPAT_GCC_TOOLCHAIN_DIR)$(notdir $(CROSS_COMPILE_COMPAT))
 CC_COMPAT_CLANG_FLAGS += -no-integrated-as -Qunused-arguments
 ifneq ($(COMPAT_GCC_TOOLCHAIN),)
 CC_COMPAT_CLANG_FLAGS += --gcc-toolchain=$(COMPAT_GCC_TOOLCHAIN)
@@ -140,7 +140,6 @@ hostprogs := $(munge)
 
 c-obj-vdso := note.o
 c-obj-vdso-gettimeofday := vgettimeofday.o
-asm-obj-vdso := sigreturn.o
 
 ifneq ($(c-gettimeofday-y),)
 VDSO_CFLAGS_gettimeofday_o += -include $(c-gettimeofday-y)
diff --git a/arch/arm64/kernel/vdso32/sigreturn.S b/arch/arm64/kernel/vdso32/sigreturn.S
deleted file mode 100644
index b0091064c3d6..000000000000
--- a/arch/arm64/kernel/vdso32/sigreturn.S
+++ /dev/null
@@ -1,58 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * This file provides both A32 and T32 versions, in accordance with the
- * arm sigreturn code.
- *
- * Please read the comments in arch/arm64/kernel/vdso/sigreturn.S to
- * understand some of the craziness in here.
- *
- * Copyright (C) 2018 ARM Limited
- */
-
-#include <linux/linkage.h>
-#include <asm/asm-offsets.h>
-#include <asm/unistd.h>
-
-	.text
-
-	.arm
-	.fnstart
-	.save {r0-r15}
-	.pad #COMPAT_SIGFRAME_REGS_OFFSET
-	nop
-SYM_CODE_START(__kernel_sigreturn_arm)
-	mov r7, #__NR_compat_sigreturn
-	svc #0
-	.fnend
-SYM_CODE_END(__kernel_sigreturn_arm)
-
-	.fnstart
-	.save {r0-r15}
-	.pad #COMPAT_RT_SIGFRAME_REGS_OFFSET
-	nop
-SYM_CODE_START(__kernel_rt_sigreturn_arm)
-	mov r7, #__NR_compat_rt_sigreturn
-	svc #0
-	.fnend
-SYM_CODE_END(__kernel_rt_sigreturn_arm)
-
-	.thumb
-	.fnstart
-	.save {r0-r15}
-	.pad #COMPAT_SIGFRAME_REGS_OFFSET
-	nop
-SYM_CODE_START(__kernel_sigreturn_thumb)
-	mov r7, #__NR_compat_sigreturn
-	svc #0
-	.fnend
-SYM_CODE_END(__kernel_sigreturn_thumb)
-
-	.fnstart
-	.save {r0-r15}
-	.pad #COMPAT_RT_SIGFRAME_REGS_OFFSET
-	nop
-SYM_CODE_START(__kernel_rt_sigreturn_thumb)
-	mov r7, #__NR_compat_rt_sigreturn
-	svc #0
-	.fnend
-SYM_CODE_END(__kernel_rt_sigreturn_thumb)
diff --git a/arch/arm64/kernel/vdso32/vdso.lds.S b/arch/arm64/kernel/vdso32/vdso.lds.S
index a3944927eaeb..3348ce5ea306 100644
--- a/arch/arm64/kernel/vdso32/vdso.lds.S
+++ b/arch/arm64/kernel/vdso32/vdso.lds.S
@@ -17,7 +17,10 @@ OUTPUT_ARCH(arm)
 
 SECTIONS
 {
-	PROVIDE_HIDDEN(_vdso_data = . - PAGE_SIZE);
+	PROVIDE_HIDDEN(_vdso_data = . - __VVAR_PAGES * PAGE_SIZE);
+#ifdef CONFIG_TIME_NS
+	PROVIDE_HIDDEN(_timens_data = _vdso_data + PAGE_SIZE);
+#endif
 	. = VDSO_LBASE + SIZEOF_HEADERS;
 
 	.hash		: { *(.hash) }			:text
@@ -64,19 +67,7 @@ VERSION
 		__vdso_clock_gettime;
 		__vdso_gettimeofday;
 		__vdso_clock_getres;
-		__kernel_sigreturn_arm;
-		__kernel_sigreturn_thumb;
-		__kernel_rt_sigreturn_arm;
-		__kernel_rt_sigreturn_thumb;
 		__vdso_clock_gettime64;
 	local: *;
 	};
 }
-
-/*
- * Make the sigreturn code visible to the kernel.
- */
-VDSO_compat_sigreturn_arm	= __kernel_sigreturn_arm;
-VDSO_compat_sigreturn_thumb	= __kernel_sigreturn_thumb;
-VDSO_compat_rt_sigreturn_arm	= __kernel_rt_sigreturn_arm;
-VDSO_compat_rt_sigreturn_thumb	= __kernel_rt_sigreturn_thumb;
diff --git a/arch/arm64/kernel/vmlinux.lds.S b/arch/arm64/kernel/vmlinux.lds.S
index 6827da7f3aa5..ec8e894684a7 100644
--- a/arch/arm64/kernel/vmlinux.lds.S
+++ b/arch/arm64/kernel/vmlinux.lds.S
@@ -10,7 +10,6 @@
 #include <asm-generic/vmlinux.lds.h>
 #include <asm/cache.h>
 #include <asm/kernel-pgtable.h>
-#include <asm/thread_info.h>
 #include <asm/memory.h>
 #include <asm/page.h>
 
@@ -165,9 +164,6 @@ SECTIONS
 		*(.altinstructions)
 		__alt_instructions_end = .;
 	}
-	.altinstr_replacement : {
-		*(.altinstr_replacement)
-	}
 
 	. = ALIGN(SEGMENT_ALIGN);
 	__inittext_end = .;
diff --git a/arch/arm64/kvm/hyp-init.S b/arch/arm64/kvm/hyp-init.S
index 6e6ed5581eed..86971fe26f3d 100644
--- a/arch/arm64/kvm/hyp-init.S
+++ b/arch/arm64/kvm/hyp-init.S
@@ -6,6 +6,7 @@
 
 #include <linux/linkage.h>
 
+#include <asm/alternative.h>
 #include <asm/assembler.h>
 #include <asm/kvm_arm.h>
 #include <asm/kvm_mmu.h>
@@ -136,11 +137,15 @@ SYM_CODE_START(__kvm_handle_stub_hvc)
 
 1:	cmp	x0, #HVC_RESET_VECTORS
 	b.ne	1f
-reset:
+
 	/*
-	 * Reset kvm back to the hyp stub. Do not clobber x0-x4 in
-	 * case we coming via HVC_SOFT_RESTART.
+	 * Set the HVC_RESET_VECTORS return code before entering the common
+	 * path so that we do not clobber x0-x2 in case we are coming via
+	 * HVC_SOFT_RESTART.
 	 */
+	mov	x0, xzr
+reset:
+	/* Reset kvm back to the hyp stub. */
 	mrs	x5, sctlr_el2
 	mov_q	x6, SCTLR_ELx_FLAGS
 	bic	x5, x5, x6		// Clear SCTL_M and etc
@@ -151,7 +156,6 @@ reset:
 	/* Install stub vectors */
 	adr_l	x5, __hyp_stub_vectors
 	msr	vbar_el2, x5
-	mov	x0, xzr
 	eret
 
 1:	/* Bad stub call */
diff --git a/arch/arm64/kvm/mmu.c b/arch/arm64/kvm/mmu.c
index 8c0035cab6b6..31058e6e7c2a 100644
--- a/arch/arm64/kvm/mmu.c
+++ b/arch/arm64/kvm/mmu.c
@@ -1326,7 +1326,7 @@ static bool stage2_get_leaf_entry(struct kvm *kvm, phys_addr_t addr,
 	return true;
 }
 
-static bool stage2_is_exec(struct kvm *kvm, phys_addr_t addr)
+static bool stage2_is_exec(struct kvm *kvm, phys_addr_t addr, unsigned long sz)
 {
 	pud_t *pudp;
 	pmd_t *pmdp;
@@ -1338,11 +1338,11 @@ static bool stage2_is_exec(struct kvm *kvm, phys_addr_t addr)
 		return false;
 
 	if (pudp)
-		return kvm_s2pud_exec(pudp);
+		return sz <= PUD_SIZE && kvm_s2pud_exec(pudp);
 	else if (pmdp)
-		return kvm_s2pmd_exec(pmdp);
+		return sz <= PMD_SIZE && kvm_s2pmd_exec(pmdp);
 	else
-		return kvm_s2pte_exec(ptep);
+		return sz == PAGE_SIZE && kvm_s2pte_exec(ptep);
 }
 
 static int stage2_set_pte(struct kvm *kvm, struct kvm_mmu_memory_cache *cache,
@@ -1958,7 +1958,8 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 	 * execute permissions, and we preserve whatever we have.
 	 */
 	needs_exec = exec_fault ||
-		(fault_status == FSC_PERM && stage2_is_exec(kvm, fault_ipa));
+		(fault_status == FSC_PERM &&
+		 stage2_is_exec(kvm, fault_ipa, vma_pagesize));
 
 	if (vma_pagesize == PUD_SIZE) {
 		pud_t new_pud = kvm_pfn_pud(pfn, mem_type);
diff --git a/arch/arm64/kvm/pmu.c b/arch/arm64/kvm/pmu.c
index b5ae3a5d509e..3c224162b3dd 100644
--- a/arch/arm64/kvm/pmu.c
+++ b/arch/arm64/kvm/pmu.c
@@ -159,7 +159,10 @@ static void kvm_vcpu_pmu_disable_el0(unsigned long events)
 }
 
 /*
- * On VHE ensure that only guest events have EL0 counting enabled
+ * On VHE ensure that only guest events have EL0 counting enabled.
+ * This is called from both vcpu_{load,put} and the sysreg handling.
+ * Since the latter is preemptible, special care must be taken to
+ * disable preemption.
  */
 void kvm_vcpu_pmu_restore_guest(struct kvm_vcpu *vcpu)
 {
@@ -169,12 +172,14 @@ void kvm_vcpu_pmu_restore_guest(struct kvm_vcpu *vcpu)
 	if (!has_vhe())
 		return;
 
+	preempt_disable();
 	host = this_cpu_ptr(&kvm_host_data);
 	events_guest = host->pmu_events.events_guest;
 	events_host = host->pmu_events.events_host;
 
 	kvm_vcpu_pmu_enable_el0(events_guest);
 	kvm_vcpu_pmu_disable_el0(events_host);
+	preempt_enable();
 }
 
 /*
diff --git a/arch/arm64/kvm/pvtime.c b/arch/arm64/kvm/pvtime.c
index 1e0f4c284888..f7b52ce1557e 100644
--- a/arch/arm64/kvm/pvtime.c
+++ b/arch/arm64/kvm/pvtime.c
@@ -3,6 +3,7 @@
 
 #include <linux/arm-smccc.h>
 #include <linux/kvm_host.h>
+#include <linux/sched/stat.h>
 
 #include <asm/kvm_mmu.h>
 #include <asm/pvclock-abi.h>
@@ -73,6 +74,11 @@ gpa_t kvm_init_stolen_time(struct kvm_vcpu *vcpu)
 	return base;
 }
 
+static bool kvm_arm_pvtime_supported(void)
+{
+	return !!sched_info_on();
+}
+
 int kvm_arm_pvtime_set_attr(struct kvm_vcpu *vcpu,
 			    struct kvm_device_attr *attr)
 {
@@ -82,7 +88,8 @@ int kvm_arm_pvtime_set_attr(struct kvm_vcpu *vcpu,
 	int ret = 0;
 	int idx;
 
-	if (attr->attr != KVM_ARM_VCPU_PVTIME_IPA)
+	if (!kvm_arm_pvtime_supported() ||
+	    attr->attr != KVM_ARM_VCPU_PVTIME_IPA)
 		return -ENXIO;
 
 	if (get_user(ipa, user))
@@ -110,7 +117,8 @@ int kvm_arm_pvtime_get_attr(struct kvm_vcpu *vcpu,
 	u64 __user *user = (u64 __user *)attr->addr;
 	u64 ipa;
 
-	if (attr->attr != KVM_ARM_VCPU_PVTIME_IPA)
+	if (!kvm_arm_pvtime_supported() ||
+	    attr->attr != KVM_ARM_VCPU_PVTIME_IPA)
 		return -ENXIO;
 
 	ipa = vcpu->arch.steal.base;
@@ -125,7 +133,8 @@ int kvm_arm_pvtime_has_attr(struct kvm_vcpu *vcpu,
 {
 	switch (attr->attr) {
 	case KVM_ARM_VCPU_PVTIME_IPA:
-		return 0;
+		if (kvm_arm_pvtime_supported())
+			return 0;
 	}
 	return -ENXIO;
 }
diff --git a/arch/arm64/kvm/reset.c b/arch/arm64/kvm/reset.c
index d3b209023727..6ed36be51b4b 100644
--- a/arch/arm64/kvm/reset.c
+++ b/arch/arm64/kvm/reset.c
@@ -245,7 +245,7 @@ static int kvm_vcpu_enable_ptrauth(struct kvm_vcpu *vcpu)
  */
 int kvm_reset_vcpu(struct kvm_vcpu *vcpu)
 {
-	int ret = -EINVAL;
+	int ret;
 	bool loaded;
 	u32 pstate;
 
@@ -269,15 +269,19 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu)
 
 	if (test_bit(KVM_ARM_VCPU_PTRAUTH_ADDRESS, vcpu->arch.features) ||
 	    test_bit(KVM_ARM_VCPU_PTRAUTH_GENERIC, vcpu->arch.features)) {
-		if (kvm_vcpu_enable_ptrauth(vcpu))
+		if (kvm_vcpu_enable_ptrauth(vcpu)) {
+			ret = -EINVAL;
 			goto out;
+		}
 	}
 
 	switch (vcpu->arch.target) {
 	default:
 		if (test_bit(KVM_ARM_VCPU_EL1_32BIT, vcpu->arch.features)) {
-			if (!cpus_have_const_cap(ARM64_HAS_32BIT_EL1))
+			if (!cpus_have_const_cap(ARM64_HAS_32BIT_EL1)) {
+				ret = -EINVAL;
 				goto out;
+			}
 			pstate = VCPU_RESET_PSTATE_SVC;
 		} else {
 			pstate = VCPU_RESET_PSTATE_EL1;
diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
index baf5ce9225ce..d3196671c590 100644
--- a/arch/arm64/kvm/sys_regs.c
+++ b/arch/arm64/kvm/sys_regs.c
@@ -1024,9 +1024,9 @@ static bool access_amu(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 
 /* Macro to expand the AMU counter and type registers*/
 #define AMU_AMEVCNTR0_EL0(n) { SYS_DESC(SYS_AMEVCNTR0_EL0(n)), access_amu }
-#define AMU_AMEVTYPE0_EL0(n) { SYS_DESC(SYS_AMEVTYPE0_EL0(n)), access_amu }
+#define AMU_AMEVTYPER0_EL0(n) { SYS_DESC(SYS_AMEVTYPER0_EL0(n)), access_amu }
 #define AMU_AMEVCNTR1_EL0(n) { SYS_DESC(SYS_AMEVCNTR1_EL0(n)), access_amu }
-#define AMU_AMEVTYPE1_EL0(n) { SYS_DESC(SYS_AMEVTYPE1_EL0(n)), access_amu }
+#define AMU_AMEVTYPER1_EL0(n) { SYS_DESC(SYS_AMEVTYPER1_EL0(n)), access_amu }
 
 static bool trap_ptrauth(struct kvm_vcpu *vcpu,
 			 struct sys_reg_params *p,
@@ -1629,22 +1629,22 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 	AMU_AMEVCNTR0_EL0(13),
 	AMU_AMEVCNTR0_EL0(14),
 	AMU_AMEVCNTR0_EL0(15),
-	AMU_AMEVTYPE0_EL0(0),
-	AMU_AMEVTYPE0_EL0(1),
-	AMU_AMEVTYPE0_EL0(2),
-	AMU_AMEVTYPE0_EL0(3),
-	AMU_AMEVTYPE0_EL0(4),
-	AMU_AMEVTYPE0_EL0(5),
-	AMU_AMEVTYPE0_EL0(6),
-	AMU_AMEVTYPE0_EL0(7),
-	AMU_AMEVTYPE0_EL0(8),
-	AMU_AMEVTYPE0_EL0(9),
-	AMU_AMEVTYPE0_EL0(10),
-	AMU_AMEVTYPE0_EL0(11),
-	AMU_AMEVTYPE0_EL0(12),
-	AMU_AMEVTYPE0_EL0(13),
-	AMU_AMEVTYPE0_EL0(14),
-	AMU_AMEVTYPE0_EL0(15),
+	AMU_AMEVTYPER0_EL0(0),
+	AMU_AMEVTYPER0_EL0(1),
+	AMU_AMEVTYPER0_EL0(2),
+	AMU_AMEVTYPER0_EL0(3),
+	AMU_AMEVTYPER0_EL0(4),
+	AMU_AMEVTYPER0_EL0(5),
+	AMU_AMEVTYPER0_EL0(6),
+	AMU_AMEVTYPER0_EL0(7),
+	AMU_AMEVTYPER0_EL0(8),
+	AMU_AMEVTYPER0_EL0(9),
+	AMU_AMEVTYPER0_EL0(10),
+	AMU_AMEVTYPER0_EL0(11),
+	AMU_AMEVTYPER0_EL0(12),
+	AMU_AMEVTYPER0_EL0(13),
+	AMU_AMEVTYPER0_EL0(14),
+	AMU_AMEVTYPER0_EL0(15),
 	AMU_AMEVCNTR1_EL0(0),
 	AMU_AMEVCNTR1_EL0(1),
 	AMU_AMEVCNTR1_EL0(2),
@@ -1661,22 +1661,22 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 	AMU_AMEVCNTR1_EL0(13),
 	AMU_AMEVCNTR1_EL0(14),
 	AMU_AMEVCNTR1_EL0(15),
-	AMU_AMEVTYPE1_EL0(0),
-	AMU_AMEVTYPE1_EL0(1),
-	AMU_AMEVTYPE1_EL0(2),
-	AMU_AMEVTYPE1_EL0(3),
-	AMU_AMEVTYPE1_EL0(4),
-	AMU_AMEVTYPE1_EL0(5),
-	AMU_AMEVTYPE1_EL0(6),
-	AMU_AMEVTYPE1_EL0(7),
-	AMU_AMEVTYPE1_EL0(8),
-	AMU_AMEVTYPE1_EL0(9),
-	AMU_AMEVTYPE1_EL0(10),
-	AMU_AMEVTYPE1_EL0(11),
-	AMU_AMEVTYPE1_EL0(12),
-	AMU_AMEVTYPE1_EL0(13),
-	AMU_AMEVTYPE1_EL0(14),
-	AMU_AMEVTYPE1_EL0(15),
+	AMU_AMEVTYPER1_EL0(0),
+	AMU_AMEVTYPER1_EL0(1),
+	AMU_AMEVTYPER1_EL0(2),
+	AMU_AMEVTYPER1_EL0(3),
+	AMU_AMEVTYPER1_EL0(4),
+	AMU_AMEVTYPER1_EL0(5),
+	AMU_AMEVTYPER1_EL0(6),
+	AMU_AMEVTYPER1_EL0(7),
+	AMU_AMEVTYPER1_EL0(8),
+	AMU_AMEVTYPER1_EL0(9),
+	AMU_AMEVTYPER1_EL0(10),
+	AMU_AMEVTYPER1_EL0(11),
+	AMU_AMEVTYPER1_EL0(12),
+	AMU_AMEVTYPER1_EL0(13),
+	AMU_AMEVTYPER1_EL0(14),
+	AMU_AMEVTYPER1_EL0(15),
 
 	{ SYS_DESC(SYS_CNTP_TVAL_EL0), access_arch_timer },
 	{ SYS_DESC(SYS_CNTP_CTL_EL0), access_arch_timer },
diff --git a/arch/arm64/kvm/vgic/vgic-v4.c b/arch/arm64/kvm/vgic/vgic-v4.c
index 27ac833e5ec7..b5fa73c9fd35 100644
--- a/arch/arm64/kvm/vgic/vgic-v4.c
+++ b/arch/arm64/kvm/vgic/vgic-v4.c
@@ -90,7 +90,15 @@ static irqreturn_t vgic_v4_doorbell_handler(int irq, void *info)
 	    !irqd_irq_disabled(&irq_to_desc(irq)->irq_data))
 		disable_irq_nosync(irq);
 
+	/*
+	 * The v4.1 doorbell can fire concurrently with the vPE being
+	 * made non-resident. Ensure we only update pending_last
+	 * *after* the non-residency sequence has completed.
+	 */
+	raw_spin_lock(&vcpu->arch.vgic_cpu.vgic_v3.its_vpe.vpe_lock);
 	vcpu->arch.vgic_cpu.vgic_v3.its_vpe.pending_last = true;
+	raw_spin_unlock(&vcpu->arch.vgic_cpu.vgic_v3.its_vpe.vpe_lock);
+
 	kvm_make_request(KVM_REQ_IRQ_PENDING, vcpu);
 	kvm_vcpu_kick(vcpu);
 
diff --git a/arch/arm64/mm/context.c b/arch/arm64/mm/context.c
index d702d60e64da..a206655a39a5 100644
--- a/arch/arm64/mm/context.c
+++ b/arch/arm64/mm/context.c
@@ -198,9 +198,10 @@ set_asid:
 	return idx2asid(asid) | generation;
 }
 
-void check_and_switch_context(struct mm_struct *mm, unsigned int cpu)
+void check_and_switch_context(struct mm_struct *mm)
 {
 	unsigned long flags;
+	unsigned int cpu;
 	u64 asid, old_active_asid;
 
 	if (system_supports_cnp())
@@ -222,9 +223,9 @@ void check_and_switch_context(struct mm_struct *mm, unsigned int cpu)
 	 *   relaxed xchg in flush_context will treat us as reserved
 	 *   because atomic RmWs are totally ordered for a given location.
 	 */
-	old_active_asid = atomic64_read(&per_cpu(active_asids, cpu));
+	old_active_asid = atomic64_read(this_cpu_ptr(&active_asids));
 	if (old_active_asid && asid_gen_match(asid) &&
-	    atomic64_cmpxchg_relaxed(&per_cpu(active_asids, cpu),
+	    atomic64_cmpxchg_relaxed(this_cpu_ptr(&active_asids),
 				     old_active_asid, asid))
 		goto switch_mm_fastpath;
 
@@ -236,10 +237,11 @@ void check_and_switch_context(struct mm_struct *mm, unsigned int cpu)
 		atomic64_set(&mm->context.id, asid);
 	}
 
+	cpu = smp_processor_id();
 	if (cpumask_test_and_clear_cpu(cpu, &tlb_flush_pending))
 		local_flush_tlb_all();
 
-	atomic64_set(&per_cpu(active_asids, cpu), asid);
+	atomic64_set(this_cpu_ptr(&active_asids), asid);
 	raw_spin_unlock_irqrestore(&cpu_asid_lock, flags);
 
 switch_mm_fastpath:
diff --git a/arch/arm64/mm/hugetlbpage.c b/arch/arm64/mm/hugetlbpage.c
index 0a52ce46f020..aa421bf4956e 100644
--- a/arch/arm64/mm/hugetlbpage.c
+++ b/arch/arm64/mm/hugetlbpage.c
@@ -19,6 +19,44 @@
 #include <asm/tlbflush.h>
 #include <asm/pgalloc.h>
 
+/*
+ * HugeTLB Support Matrix
+ *
+ * ---------------------------------------------------
+ * | Page Size | CONT PTE |  PMD  | CONT PMD |  PUD  |
+ * ---------------------------------------------------
+ * |     4K    |   64K    |   2M  |    32M   |   1G  |
+ * |    16K    |    2M    |  32M  |     1G   |       |
+ * |    64K    |    2M    | 512M  |    16G   |       |
+ * ---------------------------------------------------
+ */
+
+/*
+ * Reserve CMA areas for the largest supported gigantic
+ * huge page when requested. Any other smaller gigantic
+ * huge pages could still be served from those areas.
+ */
+#ifdef CONFIG_CMA
+void __init arm64_hugetlb_cma_reserve(void)
+{
+	int order;
+
+#ifdef CONFIG_ARM64_4K_PAGES
+	order = PUD_SHIFT - PAGE_SHIFT;
+#else
+	order = CONT_PMD_SHIFT + PMD_SHIFT - PAGE_SHIFT;
+#endif
+	/*
+	 * HugeTLB CMA reservation is required for gigantic
+	 * huge pages which could not be allocated via the
+	 * page allocator. Just warn if there is any change
+	 * breaking this assumption.
+	 */
+	WARN_ON(order <= MAX_ORDER);
+	hugetlb_cma_reserve(order);
+}
+#endif /* CONFIG_CMA */
+
 #ifdef CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION
 bool arch_hugetlb_migration_supported(struct hstate *h)
 {
@@ -457,9 +495,9 @@ static int __init hugetlbpage_init(void)
 #ifdef CONFIG_ARM64_4K_PAGES
 	hugetlb_add_hstate(PUD_SHIFT - PAGE_SHIFT);
 #endif
-	hugetlb_add_hstate((CONT_PMD_SHIFT + PMD_SHIFT) - PAGE_SHIFT);
+	hugetlb_add_hstate(CONT_PMD_SHIFT - PAGE_SHIFT);
 	hugetlb_add_hstate(PMD_SHIFT - PAGE_SHIFT);
-	hugetlb_add_hstate((CONT_PTE_SHIFT + PAGE_SHIFT) - PAGE_SHIFT);
+	hugetlb_add_hstate(CONT_PTE_SHIFT - PAGE_SHIFT);
 
 	return 0;
 }
diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c
index e631e6425165..f8c19c6c8e71 100644
--- a/arch/arm64/mm/init.c
+++ b/arch/arm64/mm/init.c
@@ -404,11 +404,6 @@ void __init arm64_memblock_init(void)
 	high_memory = __va(memblock_end_of_DRAM() - 1) + 1;
 
 	dma_contiguous_reserve(arm64_dma32_phys_limit);
-
-#ifdef CONFIG_ARM64_4K_PAGES
-	hugetlb_cma_reserve(PUD_SHIFT - PAGE_SHIFT);
-#endif
-
 }
 
 void __init bootmem_init(void)
@@ -424,6 +419,16 @@ void __init bootmem_init(void)
 	min_low_pfn = min;
 
 	arm64_numa_init();
+
+	/*
+	 * must be done after arm64_numa_init() which calls numa_init() to
+	 * initialize node_online_map that gets used in hugetlb_cma_reserve()
+	 * while allocating required CMA size across online nodes.
+	 */
+#if defined(CONFIG_HUGETLB_PAGE) && defined(CONFIG_CMA)
+	arm64_hugetlb_cma_reserve();
+#endif
+
 	/*
 	 * Sparsemem tries to allocate bootmem in memory_present(), so must be
 	 * done after the fixed reservations.
@@ -558,27 +563,11 @@ void free_initmem(void)
 	unmap_kernel_range((u64)__init_begin, (u64)(__init_end - __init_begin));
 }
 
-/*
- * Dump out memory limit information on panic.
- */
-static int dump_mem_limit(struct notifier_block *self, unsigned long v, void *p)
+void dump_mem_limit(void)
 {
 	if (memory_limit != PHYS_ADDR_MAX) {
 		pr_emerg("Memory Limit: %llu MB\n", memory_limit >> 20);
 	} else {
 		pr_emerg("Memory Limit: none\n");
 	}
-	return 0;
-}
-
-static struct notifier_block mem_limit_notifier = {
-	.notifier_call = dump_mem_limit,
-};
-
-static int __init register_mem_limit_dumper(void)
-{
-	atomic_notifier_chain_register(&panic_notifier_list,
-				       &mem_limit_notifier);
-	return 0;
 }
-__initcall(register_mem_limit_dumper);
diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c
index 990929c8837e..1df25f26571d 100644
--- a/arch/arm64/mm/mmu.c
+++ b/arch/arm64/mm/mmu.c
@@ -723,6 +723,7 @@ int kern_addr_valid(unsigned long addr)
 	pmd_t *pmdp, pmd;
 	pte_t *ptep, pte;
 
+	addr = arch_kasan_reset_tag(addr);
 	if ((((long)addr) >> VA_BITS) != -1UL)
 		return 0;
 
diff --git a/arch/c6x/kernel/process.c b/arch/c6x/kernel/process.c
index cb9c8b63cddd..9f4fd6a40a10 100644
--- a/arch/c6x/kernel/process.c
+++ b/arch/c6x/kernel/process.c
@@ -105,8 +105,8 @@ void start_thread(struct pt_regs *regs, unsigned int pc, unsigned long usp)
  * Copy a new thread context in its stack.
  */
 int copy_thread(unsigned long clone_flags, unsigned long usp,
-		unsigned long ustk_size,
-		struct task_struct *p)
+		unsigned long ustk_size, struct task_struct *p,
+		unsigned long tls)
 {
 	struct pt_regs *childregs;
 
diff --git a/arch/csky/Kconfig b/arch/csky/Kconfig
index bd31ab12f77d..902f1142d550 100644
--- a/arch/csky/Kconfig
+++ b/arch/csky/Kconfig
@@ -38,7 +38,6 @@ config CSKY
 	select GX6605S_TIMER if CPU_CK610
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_ARCH_AUDITSYSCALL
-	select HAVE_COPY_THREAD_TLS
 	select HAVE_DEBUG_BUGVERBOSE
 	select HAVE_DYNAMIC_FTRACE
 	select HAVE_DYNAMIC_FTRACE_WITH_REGS
diff --git a/arch/csky/kernel/ftrace.c b/arch/csky/kernel/ftrace.c
index 3c425b84e3be..b4a7ec1517ff 100644
--- a/arch/csky/kernel/ftrace.c
+++ b/arch/csky/kernel/ftrace.c
@@ -72,7 +72,8 @@ static int ftrace_check_current_nop(unsigned long hook)
 	uint16_t olds[7];
 	unsigned long hook_pos = hook - 2;
 
-	if (probe_kernel_read((void *)olds, (void *)hook_pos, sizeof(nops)))
+	if (copy_from_kernel_nofault((void *)olds, (void *)hook_pos,
+			sizeof(nops)))
 		return -EFAULT;
 
 	if (memcmp((void *)nops, (void *)olds, sizeof(nops))) {
@@ -97,7 +98,7 @@ static int ftrace_modify_code(unsigned long hook, unsigned long target,
 
 	make_jbsr(target, hook, call, nolr);
 
-	ret = probe_kernel_write((void *)hook_pos, enable ? call : nops,
+	ret = copy_to_kernel_nofault((void *)hook_pos, enable ? call : nops,
 				 sizeof(nops));
 	if (ret)
 		return -EPERM;
diff --git a/arch/csky/kernel/process.c b/arch/csky/kernel/process.c
index 8b3fad062ab2..28cfeaaf902a 100644
--- a/arch/csky/kernel/process.c
+++ b/arch/csky/kernel/process.c
@@ -40,7 +40,7 @@ unsigned long thread_saved_pc(struct task_struct *tsk)
 	return sw->r15;
 }
 
-int copy_thread_tls(unsigned long clone_flags,
+int copy_thread(unsigned long clone_flags,
 		unsigned long usp,
 		unsigned long kthread_arg,
 		struct task_struct *p,
diff --git a/arch/h8300/include/asm/atomic.h b/arch/h8300/include/asm/atomic.h
index c6b6a06231b2..a990d151f163 100644
--- a/arch/h8300/include/asm/atomic.h
+++ b/arch/h8300/include/asm/atomic.h
@@ -12,8 +12,6 @@
  * resource counting etc..
  */
 
-#define ATOMIC_INIT(i)	{ (i) }
-
 #define atomic_read(v)		READ_ONCE((v)->counter)
 #define atomic_set(v, i)	WRITE_ONCE(((v)->counter), (i))
 
diff --git a/arch/h8300/kernel/process.c b/arch/h8300/kernel/process.c
index 0ef55e3052c9..83ce3caf7313 100644
--- a/arch/h8300/kernel/process.c
+++ b/arch/h8300/kernel/process.c
@@ -105,9 +105,8 @@ void flush_thread(void)
 {
 }
 
-int copy_thread(unsigned long clone_flags,
-		unsigned long usp, unsigned long topstk,
-		struct task_struct *p)
+int copy_thread(unsigned long clone_flags, unsigned long usp,
+		unsigned long topstk, struct task_struct *p, unsigned long tls)
 {
 	struct pt_regs *childregs;
 
@@ -159,11 +158,19 @@ asmlinkage int sys_clone(unsigned long __user *args)
 	unsigned long  newsp;
 	uintptr_t parent_tidptr;
 	uintptr_t child_tidptr;
+	struct kernel_clone_args kargs = {};
 
 	get_user(clone_flags, &args[0]);
 	get_user(newsp, &args[1]);
 	get_user(parent_tidptr, &args[2]);
 	get_user(child_tidptr, &args[3]);
-	return do_fork(clone_flags, newsp, 0,
-		       (int __user *)parent_tidptr, (int __user *)child_tidptr);
+
+	kargs.flags		= (lower_32_bits(clone_flags) & ~CSIGNAL);
+	kargs.pidfd		= (int __user *)parent_tidptr;
+	kargs.child_tid		= (int __user *)child_tidptr;
+	kargs.parent_tid	= (int __user *)parent_tidptr;
+	kargs.exit_signal	= (lower_32_bits(clone_flags) & CSIGNAL);
+	kargs.stack		= newsp;
+
+	return _do_fork(&kargs);
 }
diff --git a/arch/hexagon/include/asm/atomic.h b/arch/hexagon/include/asm/atomic.h
index 0231d69c8bf2..4ab895d7111f 100644
--- a/arch/hexagon/include/asm/atomic.h
+++ b/arch/hexagon/include/asm/atomic.h
@@ -12,8 +12,6 @@
 #include <asm/cmpxchg.h>
 #include <asm/barrier.h>
 
-#define ATOMIC_INIT(i)		{ (i) }
-
 /*  Normal writes in our arch don't clear lock reservations  */
 
 static inline void atomic_set(atomic_t *v, int new)
diff --git a/arch/hexagon/kernel/process.c b/arch/hexagon/kernel/process.c
index ac07f5f4b76b..d294e71d11d8 100644
--- a/arch/hexagon/kernel/process.c
+++ b/arch/hexagon/kernel/process.c
@@ -50,8 +50,8 @@ void arch_cpu_idle(void)
 /*
  * Copy architecture-specific thread state
  */
-int copy_thread(unsigned long clone_flags, unsigned long usp,
-		unsigned long arg, struct task_struct *p)
+int copy_thread(unsigned long clone_flags, unsigned long usp, unsigned long arg,
+		struct task_struct *p, unsigned long tls)
 {
 	struct thread_info *ti = task_thread_info(p);
 	struct hexagon_switch_stack *ss;
@@ -100,7 +100,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 	 * ugp is used to provide TLS support.
 	 */
 	if (clone_flags & CLONE_SETTLS)
-		childregs->ugp = childregs->r04;
+		childregs->ugp = tls;
 
 	/*
 	 * Parent sees new pid -- not necessary, not even possible at
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 1fa2fe2ef053..5b4ec80bf586 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -192,6 +192,7 @@ config IA64_SGI_UV
 
 config IA64_HP_SBA_IOMMU
 	bool "HP SBA IOMMU support"
+	select DMA_OPS
 	default y
 	help
 	  Say Y here to add support for the SBA IOMMU found on HP zx1 and
diff --git a/arch/ia64/include/asm/atomic.h b/arch/ia64/include/asm/atomic.h
index 50440f3ddc43..f267d956458f 100644
--- a/arch/ia64/include/asm/atomic.h
+++ b/arch/ia64/include/asm/atomic.h
@@ -19,7 +19,6 @@
 #include <asm/barrier.h>
 
 
-#define ATOMIC_INIT(i)		{ (i) }
 #define ATOMIC64_INIT(i)	{ (i) }
 
 #define atomic_read(v)		READ_ONCE((v)->counter)
diff --git a/arch/ia64/include/asm/sections.h b/arch/ia64/include/asm/sections.h
index cea15f2dd38d..3a033d2008b3 100644
--- a/arch/ia64/include/asm/sections.h
+++ b/arch/ia64/include/asm/sections.h
@@ -35,7 +35,7 @@ static inline void *dereference_function_descriptor(void *ptr)
 	struct fdesc *desc = ptr;
 	void *p;
 
-	if (!probe_kernel_address(&desc->ip, p))
+	if (!get_kernel_nofault(p, (void *)&desc->ip))
 		ptr = p;
 	return ptr;
 }
diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S
index c5efac285bc3..e98e3dafffd8 100644
--- a/arch/ia64/kernel/entry.S
+++ b/arch/ia64/kernel/entry.S
@@ -112,19 +112,16 @@ GLOBAL_ENTRY(sys_clone2)
 	.prologue ASM_UNW_PRLG_RP|ASM_UNW_PRLG_PFS, ASM_UNW_PRLG_GRSAVE(8)
 	alloc r16=ar.pfs,8,2,6,0
 	DO_SAVE_SWITCH_STACK
-	adds r2=PT(R16)+IA64_SWITCH_STACK_SIZE+16,sp
 	mov loc0=rp
-	mov loc1=r16				// save ar.pfs across do_fork
+	mov loc1=r16                             // save ar.pfs across ia64_clone
 	.body
+	mov out0=in0
 	mov out1=in1
 	mov out2=in2
-	tbit.nz p6,p0=in0,CLONE_SETTLS_BIT
-	mov out3=in3	// parent_tidptr: valid only w/CLONE_PARENT_SETTID
-	;;
-(p6)	st8 [r2]=in5				// store TLS in r16 for copy_thread()
-	mov out4=in4	// child_tidptr:  valid only w/CLONE_CHILD_SETTID or CLONE_CHILD_CLEARTID
-	mov out0=in0				// out0 = clone_flags
-	br.call.sptk.many rp=do_fork
+	mov out3=in3
+	mov out4=in4
+	mov out5=in5
+	br.call.sptk.many rp=ia64_clone
 .ret1:	.restore sp
 	adds sp=IA64_SWITCH_STACK_SIZE,sp	// pop the switch stack
 	mov ar.pfs=loc1
@@ -143,19 +140,16 @@ GLOBAL_ENTRY(sys_clone)
 	.prologue ASM_UNW_PRLG_RP|ASM_UNW_PRLG_PFS, ASM_UNW_PRLG_GRSAVE(8)
 	alloc r16=ar.pfs,8,2,6,0
 	DO_SAVE_SWITCH_STACK
-	adds r2=PT(R16)+IA64_SWITCH_STACK_SIZE+16,sp
 	mov loc0=rp
-	mov loc1=r16				// save ar.pfs across do_fork
+	mov loc1=r16                             // save ar.pfs across ia64_clone
 	.body
+	mov out0=in0
 	mov out1=in1
 	mov out2=16				// stacksize (compensates for 16-byte scratch area)
-	tbit.nz p6,p0=in0,CLONE_SETTLS_BIT
-	mov out3=in2	// parent_tidptr: valid only w/CLONE_PARENT_SETTID
-	;;
-(p6)	st8 [r2]=in4				// store TLS in r13 (tp)
-	mov out4=in3	// child_tidptr:  valid only w/CLONE_CHILD_SETTID or CLONE_CHILD_CLEARTID
-	mov out0=in0				// out0 = clone_flags
-	br.call.sptk.many rp=do_fork
+	mov out3=in3
+	mov out4=in4
+	mov out5=in5
+	br.call.sptk.many rp=ia64_clone
 .ret2:	.restore sp
 	adds sp=IA64_SWITCH_STACK_SIZE,sp	// pop the switch stack
 	mov ar.pfs=loc1
@@ -590,7 +584,7 @@ GLOBAL_ENTRY(ia64_ret_from_clone)
 	nop.i 0
 	/*
 	 * We need to call schedule_tail() to complete the scheduling process.
-	 * Called by ia64_switch_to() after do_fork()->copy_thread().  r8 contains the
+	 * Called by ia64_switch_to() after ia64_clone()->copy_thread().  r8 contains the
 	 * address of the previously executing task.
 	 */
 	br.call.sptk.many rp=ia64_invoke_schedule_tail
diff --git a/arch/ia64/kernel/ftrace.c b/arch/ia64/kernel/ftrace.c
index cee411e647ca..b2ab2d58fb30 100644
--- a/arch/ia64/kernel/ftrace.c
+++ b/arch/ia64/kernel/ftrace.c
@@ -108,7 +108,7 @@ ftrace_modify_code(unsigned long ip, unsigned char *old_code,
 		goto skip_check;
 
 	/* read the text we want to modify */
-	if (probe_kernel_read(replaced, (void *)ip, MCOUNT_INSN_SIZE))
+	if (copy_from_kernel_nofault(replaced, (void *)ip, MCOUNT_INSN_SIZE))
 		return -EFAULT;
 
 	/* Make sure it is what we expect it to be */
@@ -117,7 +117,7 @@ ftrace_modify_code(unsigned long ip, unsigned char *old_code,
 
 skip_check:
 	/* replace the text with the new text */
-	if (probe_kernel_write(((void *)ip), new_code, MCOUNT_INSN_SIZE))
+	if (copy_to_kernel_nofault(((void *)ip), new_code, MCOUNT_INSN_SIZE))
 		return -EPERM;
 	flush_icache_range(ip, ip + MCOUNT_INSN_SIZE);
 
@@ -129,7 +129,7 @@ static int ftrace_make_nop_check(struct dyn_ftrace *rec, unsigned long addr)
 	unsigned char __attribute__((aligned(8))) replaced[MCOUNT_INSN_SIZE];
 	unsigned long ip = rec->ip;
 
-	if (probe_kernel_read(replaced, (void *)ip, MCOUNT_INSN_SIZE))
+	if (copy_from_kernel_nofault(replaced, (void *)ip, MCOUNT_INSN_SIZE))
 		return -EFAULT;
 	if (rec->flags & FTRACE_FL_CONVERTED) {
 		struct ftrace_call_insn *call_insn, *tmp_call;
diff --git a/arch/ia64/kernel/process.c b/arch/ia64/kernel/process.c
index 96dfb9e4b16f..7a4de9d994c5 100644
--- a/arch/ia64/kernel/process.c
+++ b/arch/ia64/kernel/process.c
@@ -296,7 +296,7 @@ ia64_load_extra (struct task_struct *task)
 		pfm_load_regs(task);
 
 	info = __this_cpu_read(pfm_syst_info);
-	if (info & PFM_CPUINFO_SYST_WIDE) 
+	if (info & PFM_CPUINFO_SYST_WIDE)
 		pfm_syst_wide_update_task(task, info, 1);
 #endif
 }
@@ -310,7 +310,7 @@ ia64_load_extra (struct task_struct *task)
  *
  *	<clone syscall>	        <some kernel call frames>
  *	sys_clone		   :
- *	do_fork			do_fork
+ *	_do_fork		_do_fork
  *	copy_thread		copy_thread
  *
  * This means that the stack layout is as follows:
@@ -333,9 +333,8 @@ ia64_load_extra (struct task_struct *task)
  * so there is nothing to worry about.
  */
 int
-copy_thread(unsigned long clone_flags,
-	     unsigned long user_stack_base, unsigned long user_stack_size,
-	     struct task_struct *p)
+copy_thread(unsigned long clone_flags, unsigned long user_stack_base,
+	    unsigned long user_stack_size, struct task_struct *p, unsigned long tls)
 {
 	extern char ia64_ret_from_clone;
 	struct switch_stack *child_stack, *stack;
@@ -416,7 +415,7 @@ copy_thread(unsigned long clone_flags,
 	rbs_size = stack->ar_bspstore - rbs;
 	memcpy((void *) child_rbs, (void *) rbs, rbs_size);
 	if (clone_flags & CLONE_SETTLS)
-		child_ptregs->r13 = regs->r16;	/* see sys_clone2() in entry.S */
+		child_ptregs->r13 = tls;
 	if (user_stack_base) {
 		child_ptregs->r12 = user_stack_base + user_stack_size - 16;
 		child_ptregs->ar_bspstore = user_stack_base;
@@ -441,11 +440,29 @@ copy_thread(unsigned long clone_flags,
 	return retval;
 }
 
+asmlinkage long ia64_clone(unsigned long clone_flags, unsigned long stack_start,
+			   unsigned long stack_size, unsigned long parent_tidptr,
+			   unsigned long child_tidptr, unsigned long tls)
+{
+	struct kernel_clone_args args = {
+		.flags		= (lower_32_bits(clone_flags) & ~CSIGNAL),
+		.pidfd		= (int __user *)parent_tidptr,
+		.child_tid	= (int __user *)child_tidptr,
+		.parent_tid	= (int __user *)parent_tidptr,
+		.exit_signal	= (lower_32_bits(clone_flags) & CSIGNAL),
+		.stack		= stack_start,
+		.stack_size	= stack_size,
+		.tls		= tls,
+	};
+
+	return _do_fork(&args);
+}
+
 static void
 do_copy_task_regs (struct task_struct *task, struct unw_frame_info *info, void *arg)
 {
 	unsigned long mask, sp, nat_bits = 0, ar_rnat, urbs_end, cfm;
-	unsigned long uninitialized_var(ip);	/* GCC be quiet */
+	unsigned long ip;
 	elf_greg_t *dst = arg;
 	struct pt_regs *pt;
 	char nat;
diff --git a/arch/ia64/kernel/syscalls/syscall.tbl b/arch/ia64/kernel/syscalls/syscall.tbl
index 49e325b604b3..ced9c83e47c9 100644
--- a/arch/ia64/kernel/syscalls/syscall.tbl
+++ b/arch/ia64/kernel/syscalls/syscall.tbl
@@ -356,6 +356,7 @@
 433	common	fspick				sys_fspick
 434	common	pidfd_open			sys_pidfd_open
 # 435 reserved for clone3
+436	common	close_range			sys_close_range
 437	common	openat2				sys_openat2
 438	common	pidfd_getfd			sys_pidfd_getfd
 439	common	faccessat2			sys_faccessat2
diff --git a/arch/ia64/kernel/unwind_i.h b/arch/ia64/kernel/unwind_i.h
index 67994a7e5816..1dd57ba44327 100644
--- a/arch/ia64/kernel/unwind_i.h
+++ b/arch/ia64/kernel/unwind_i.h
@@ -42,7 +42,7 @@ enum unw_register_index {
 
 struct unw_info_block {
 	u64 header;
-	u64 desc[0];		/* unwind descriptors */
+	u64 desc[];		/* unwind descriptors */
 	/* personality routine and language-specific data follow behind descriptors */
 };
 
diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c
index dd8284bcbf16..da810ca234da 100644
--- a/arch/ia64/mm/discontig.c
+++ b/arch/ia64/mm/discontig.c
@@ -180,7 +180,7 @@ static void *per_cpu_node_setup(void *cpu_data, int node)
 void __init setup_per_cpu_areas(void)
 {
 	struct pcpu_alloc_info *ai;
-	struct pcpu_group_info *uninitialized_var(gi);
+	struct pcpu_group_info *gi;
 	unsigned int *cpu_map;
 	void *base;
 	unsigned long base_offset;
diff --git a/arch/ia64/mm/tlb.c b/arch/ia64/mm/tlb.c
index 72cc568bc841..71c19918e387 100644
--- a/arch/ia64/mm/tlb.c
+++ b/arch/ia64/mm/tlb.c
@@ -369,7 +369,7 @@ EXPORT_SYMBOL(flush_tlb_range);
 
 void ia64_tlb_init(void)
 {
-	ia64_ptce_info_t uninitialized_var(ptce_info); /* GCC be quiet */
+	ia64_ptce_info_t ptce_info;
 	u64 tr_pgbits;
 	long status;
 	pal_vm_info_1_u_t vm_info_1;
diff --git a/arch/m68k/Kbuild b/arch/m68k/Kbuild
new file mode 100644
index 000000000000..18abb35c26a1
--- /dev/null
+++ b/arch/m68k/Kbuild
@@ -0,0 +1,19 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-y				+= kernel/ mm/
+obj-$(CONFIG_Q40)		+= q40/
+obj-$(CONFIG_AMIGA)		+= amiga/
+obj-$(CONFIG_ATARI)		+= atari/
+obj-$(CONFIG_MAC)		+= mac/
+obj-$(CONFIG_HP300)		+= hp300/
+obj-$(CONFIG_APOLLO)		+= apollo/
+obj-$(CONFIG_MVME147)		+= mvme147/
+obj-$(CONFIG_MVME16x)		+= mvme16x/
+obj-$(CONFIG_BVME6000)		+= bvme6000/
+obj-$(CONFIG_SUN3X)		+= sun3x/ sun3/
+obj-$(CONFIG_SUN3)		+= sun3/
+obj-$(CONFIG_NATFEAT)		+= emu/
+obj-$(CONFIG_M68040)		+= fpsp040/
+obj-$(CONFIG_M68060)		+= ifpsp060/
+obj-$(CONFIG_M68KFPU_EMU)	+= math-emu/
+obj-$(CONFIG_M68000)		+= 68000/
+obj-$(CONFIG_COLDFIRE)		+= coldfire/
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index 6ad6cdac74b3..6663f1741798 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -14,7 +14,6 @@ config M68K
 	select HAVE_AOUT if MMU
 	select HAVE_ASM_MODVERSIONS
 	select HAVE_DEBUG_BUGVERBOSE
-	select HAVE_COPY_THREAD_TLS
 	select GENERIC_IRQ_SHOW
 	select GENERIC_ATOMIC64
 	select HAVE_UID16
diff --git a/arch/m68k/Makefile b/arch/m68k/Makefile
index 0415d28dbe4f..4438ffb4bbe1 100644
--- a/arch/m68k/Makefile
+++ b/arch/m68k/Makefile
@@ -32,30 +32,33 @@ endif
 #	compiler cpu type flag.
 #
 ifndef CONFIG_M68040
-cpuflags-$(CONFIG_M68060)	:= -m68060
+cpuflags-$(CONFIG_M68060)	= -m68060
 endif
 ifndef CONFIG_M68060
-cpuflags-$(CONFIG_M68040)	:= -m68040
+cpuflags-$(CONFIG_M68040)	= -m68040
 endif
-cpuflags-$(CONFIG_M68030)	:=
-cpuflags-$(CONFIG_M68020)	:=
-cpuflags-$(CONFIG_M68000)	:= -m68000
-cpuflags-$(CONFIG_M5441x)	:= $(call cc-option,-mcpu=54455,-mcfv4e)
-cpuflags-$(CONFIG_M54xx)	:= $(call cc-option,-mcpu=5475,-m5200)
-cpuflags-$(CONFIG_M5407)	:= $(call cc-option,-mcpu=5407,-m5200)
-cpuflags-$(CONFIG_M532x)	:= $(call cc-option,-mcpu=532x,-m5307)
-cpuflags-$(CONFIG_M537x)	:= $(call cc-option,-mcpu=537x,-m5307)
-cpuflags-$(CONFIG_M5307)	:= $(call cc-option,-mcpu=5307,-m5200)
-cpuflags-$(CONFIG_M528x)	:= $(call cc-option,-mcpu=528x,-m5307)
-cpuflags-$(CONFIG_M5275)	:= $(call cc-option,-mcpu=5275,-m5307)
-cpuflags-$(CONFIG_M5272)	:= $(call cc-option,-mcpu=5272,-m5307)
-cpuflags-$(CONFIG_M5271)	:= $(call cc-option,-mcpu=5271,-m5307)
-cpuflags-$(CONFIG_M523x)	:= $(call cc-option,-mcpu=523x,-m5307)
-cpuflags-$(CONFIG_M525x)	:= $(call cc-option,-mcpu=5253,-m5200)
-cpuflags-$(CONFIG_M5249)	:= $(call cc-option,-mcpu=5249,-m5200)
-cpuflags-$(CONFIG_M520x)	:= $(call cc-option,-mcpu=5208,-m5200)
-cpuflags-$(CONFIG_M5206e)	:= $(call cc-option,-mcpu=5206e,-m5200)
-cpuflags-$(CONFIG_M5206)	:= $(call cc-option,-mcpu=5206,-m5200)
+cpuflags-$(CONFIG_M68030)	=
+cpuflags-$(CONFIG_M68020)	=
+cpuflags-$(CONFIG_M68000)	= -m68000
+cpuflags-$(CONFIG_M5441x)	= $(call cc-option,-mcpu=54455,-mcfv4e)
+cpuflags-$(CONFIG_M54xx)	= $(call cc-option,-mcpu=5475,-m5200)
+cpuflags-$(CONFIG_M5407)	= $(call cc-option,-mcpu=5407,-m5200)
+cpuflags-$(CONFIG_M532x)	= $(call cc-option,-mcpu=532x,-m5307)
+cpuflags-$(CONFIG_M537x)	= $(call cc-option,-mcpu=537x,-m5307)
+cpuflags-$(CONFIG_M5307)	= $(call cc-option,-mcpu=5307,-m5200)
+cpuflags-$(CONFIG_M528x)	= $(call cc-option,-mcpu=528x,-m5307)
+cpuflags-$(CONFIG_M5275)	= $(call cc-option,-mcpu=5275,-m5307)
+cpuflags-$(CONFIG_M5272)	= $(call cc-option,-mcpu=5272,-m5307)
+cpuflags-$(CONFIG_M5271)	= $(call cc-option,-mcpu=5271,-m5307)
+cpuflags-$(CONFIG_M523x)	= $(call cc-option,-mcpu=523x,-m5307)
+cpuflags-$(CONFIG_M525x)	= $(call cc-option,-mcpu=5253,-m5200)
+cpuflags-$(CONFIG_M5249)	= $(call cc-option,-mcpu=5249,-m5200)
+cpuflags-$(CONFIG_M520x)	= $(call cc-option,-mcpu=5208,-m5200)
+cpuflags-$(CONFIG_M5206e)	= $(call cc-option,-mcpu=5206e,-m5200)
+cpuflags-$(CONFIG_M5206)	= $(call cc-option,-mcpu=5206,-m5200)
+
+# Evaluate tune cc-option calls now
+cpuflags-y := $(cpuflags-y)
 
 KBUILD_AFLAGS += $(cpuflags-y)
 KBUILD_CFLAGS += $(cpuflags-y)
@@ -67,9 +70,8 @@ ifdef CONFIG_MMU
 KBUILD_CFLAGS += -fno-strength-reduce -ffixed-a2
 else
 # we can use a m68k-linux-gcc toolchain with these in place
-KBUILD_CFLAGS += -DUTS_SYSNAME=\"uClinux\"
-KBUILD_CFLAGS += -D__uClinux__
-KBUILD_AFLAGS += -D__uClinux__
+KBUILD_CPPFLAGS += -DUTS_SYSNAME=\"uClinux\"
+KBUILD_CPPFLAGS += -D__uClinux__
 endif
 
 KBUILD_LDFLAGS := -m m68kelf
@@ -97,27 +99,9 @@ head-$(CONFIG_SUN3)		:= arch/m68k/kernel/sun3-head.o
 head-$(CONFIG_M68000)		:= arch/m68k/68000/head.o
 head-$(CONFIG_COLDFIRE)		:= arch/m68k/coldfire/head.o
 
-core-y				+= arch/m68k/kernel/	arch/m68k/mm/
+core-y				+= arch/m68k/
 libs-y				+= arch/m68k/lib/
 
-core-$(CONFIG_Q40)		+= arch/m68k/q40/
-core-$(CONFIG_AMIGA)		+= arch/m68k/amiga/
-core-$(CONFIG_ATARI)		+= arch/m68k/atari/
-core-$(CONFIG_MAC)		+= arch/m68k/mac/
-core-$(CONFIG_HP300)		+= arch/m68k/hp300/
-core-$(CONFIG_APOLLO)		+= arch/m68k/apollo/
-core-$(CONFIG_MVME147)		+= arch/m68k/mvme147/
-core-$(CONFIG_MVME16x)		+= arch/m68k/mvme16x/
-core-$(CONFIG_BVME6000)		+= arch/m68k/bvme6000/
-core-$(CONFIG_SUN3X)		+= arch/m68k/sun3x/	arch/m68k/sun3/
-core-$(CONFIG_SUN3)		+= arch/m68k/sun3/	arch/m68k/sun3/prom/
-core-$(CONFIG_NATFEAT)		+= arch/m68k/emu/
-core-$(CONFIG_M68040)		+= arch/m68k/fpsp040/
-core-$(CONFIG_M68060)		+= arch/m68k/ifpsp060/
-core-$(CONFIG_M68KFPU_EMU)	+= arch/m68k/math-emu/
-core-$(CONFIG_M68000)		+= arch/m68k/68000/
-core-$(CONFIG_COLDFIRE)		+= arch/m68k/coldfire/
-
 
 all:	zImage
 
@@ -154,8 +138,7 @@ else
 	$(KBZIP2) -1c vmlinux >vmlinux.bz2
 endif
 
-archclean:
-	rm -f vmlinux.gz vmlinux.bz2
+CLEAN_FILES += vmlinux.gz vmlinux.bz2
 
 archheaders:
 	$(Q)$(MAKE) $(build)=arch/m68k/kernel/syscalls all
diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig
index 888b75e7fd79..f9f4fa595e13 100644
--- a/arch/m68k/configs/amiga_defconfig
+++ b/arch/m68k/configs/amiga_defconfig
@@ -594,6 +594,7 @@ CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_SALSA20=m
@@ -615,6 +616,7 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
+CONFIG_PRIME_NUMBERS=m
 CONFIG_CRC32_SELFTEST=m
 CONFIG_CRC64=m
 CONFIG_XZ_DEC_TEST=m
@@ -643,6 +645,7 @@ CONFIG_TEST_OVERFLOW=m
 CONFIG_TEST_RHASHTABLE=m
 CONFIG_TEST_HASH=m
 CONFIG_TEST_IDA=m
+CONFIG_TEST_BITOPS=m
 CONFIG_TEST_VMALLOC=m
 CONFIG_TEST_USER_COPY=m
 CONFIG_TEST_BPF=m
diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig
index 45303846b659..f4828e86d547 100644
--- a/arch/m68k/configs/apollo_defconfig
+++ b/arch/m68k/configs/apollo_defconfig
@@ -550,6 +550,7 @@ CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_SALSA20=m
@@ -571,6 +572,7 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
+CONFIG_PRIME_NUMBERS=m
 CONFIG_CRC32_SELFTEST=m
 CONFIG_CRC64=m
 CONFIG_XZ_DEC_TEST=m
@@ -599,6 +601,7 @@ CONFIG_TEST_OVERFLOW=m
 CONFIG_TEST_RHASHTABLE=m
 CONFIG_TEST_HASH=m
 CONFIG_TEST_IDA=m
+CONFIG_TEST_BITOPS=m
 CONFIG_TEST_VMALLOC=m
 CONFIG_TEST_USER_COPY=m
 CONFIG_TEST_BPF=m
diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig
index de824c1bc3d3..e7911f141de1 100644
--- a/arch/m68k/configs/atari_defconfig
+++ b/arch/m68k/configs/atari_defconfig
@@ -572,6 +572,7 @@ CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_SALSA20=m
@@ -593,6 +594,7 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
+CONFIG_PRIME_NUMBERS=m
 CONFIG_CRC32_SELFTEST=m
 CONFIG_CRC64=m
 CONFIG_XZ_DEC_TEST=m
@@ -621,6 +623,7 @@ CONFIG_TEST_OVERFLOW=m
 CONFIG_TEST_RHASHTABLE=m
 CONFIG_TEST_HASH=m
 CONFIG_TEST_IDA=m
+CONFIG_TEST_BITOPS=m
 CONFIG_TEST_VMALLOC=m
 CONFIG_TEST_USER_COPY=m
 CONFIG_TEST_BPF=m
diff --git a/arch/m68k/configs/bvme6000_defconfig b/arch/m68k/configs/bvme6000_defconfig
index 071839ca6a59..d574e438e6db 100644
--- a/arch/m68k/configs/bvme6000_defconfig
+++ b/arch/m68k/configs/bvme6000_defconfig
@@ -543,6 +543,7 @@ CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_SALSA20=m
@@ -564,6 +565,7 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
+CONFIG_PRIME_NUMBERS=m
 CONFIG_CRC32_SELFTEST=m
 CONFIG_CRC64=m
 CONFIG_XZ_DEC_TEST=m
@@ -592,6 +594,7 @@ CONFIG_TEST_OVERFLOW=m
 CONFIG_TEST_RHASHTABLE=m
 CONFIG_TEST_HASH=m
 CONFIG_TEST_IDA=m
+CONFIG_TEST_BITOPS=m
 CONFIG_TEST_VMALLOC=m
 CONFIG_TEST_USER_COPY=m
 CONFIG_TEST_BPF=m
diff --git a/arch/m68k/configs/hp300_defconfig b/arch/m68k/configs/hp300_defconfig
index 37ac7b019ec1..c7ce206e6138 100644
--- a/arch/m68k/configs/hp300_defconfig
+++ b/arch/m68k/configs/hp300_defconfig
@@ -552,6 +552,7 @@ CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_SALSA20=m
@@ -573,6 +574,7 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
+CONFIG_PRIME_NUMBERS=m
 CONFIG_CRC32_SELFTEST=m
 CONFIG_CRC64=m
 CONFIG_XZ_DEC_TEST=m
@@ -601,6 +603,7 @@ CONFIG_TEST_OVERFLOW=m
 CONFIG_TEST_RHASHTABLE=m
 CONFIG_TEST_HASH=m
 CONFIG_TEST_IDA=m
+CONFIG_TEST_BITOPS=m
 CONFIG_TEST_VMALLOC=m
 CONFIG_TEST_USER_COPY=m
 CONFIG_TEST_BPF=m
diff --git a/arch/m68k/configs/mac_defconfig b/arch/m68k/configs/mac_defconfig
index 608779866260..522dcf624aa5 100644
--- a/arch/m68k/configs/mac_defconfig
+++ b/arch/m68k/configs/mac_defconfig
@@ -574,6 +574,7 @@ CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_SALSA20=m
@@ -595,6 +596,7 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
+CONFIG_PRIME_NUMBERS=m
 CONFIG_CRC32_SELFTEST=m
 CONFIG_CRC64=m
 CONFIG_XZ_DEC_TEST=m
@@ -623,6 +625,7 @@ CONFIG_TEST_OVERFLOW=m
 CONFIG_TEST_RHASHTABLE=m
 CONFIG_TEST_HASH=m
 CONFIG_TEST_IDA=m
+CONFIG_TEST_BITOPS=m
 CONFIG_TEST_VMALLOC=m
 CONFIG_TEST_USER_COPY=m
 CONFIG_TEST_BPF=m
diff --git a/arch/m68k/configs/multi_defconfig b/arch/m68k/configs/multi_defconfig
index 0abb53c38c20..2433409f4369 100644
--- a/arch/m68k/configs/multi_defconfig
+++ b/arch/m68k/configs/multi_defconfig
@@ -660,6 +660,7 @@ CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_SALSA20=m
@@ -681,6 +682,7 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
+CONFIG_PRIME_NUMBERS=m
 CONFIG_CRC32_SELFTEST=m
 CONFIG_CRC64=m
 CONFIG_XZ_DEC_TEST=m
@@ -709,6 +711,7 @@ CONFIG_TEST_OVERFLOW=m
 CONFIG_TEST_RHASHTABLE=m
 CONFIG_TEST_HASH=m
 CONFIG_TEST_IDA=m
+CONFIG_TEST_BITOPS=m
 CONFIG_TEST_VMALLOC=m
 CONFIG_TEST_USER_COPY=m
 CONFIG_TEST_BPF=m
diff --git a/arch/m68k/configs/mvme147_defconfig b/arch/m68k/configs/mvme147_defconfig
index cb14c234d3ad..5568aa7d9d41 100644
--- a/arch/m68k/configs/mvme147_defconfig
+++ b/arch/m68k/configs/mvme147_defconfig
@@ -542,6 +542,7 @@ CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_SALSA20=m
@@ -563,6 +564,7 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
+CONFIG_PRIME_NUMBERS=m
 CONFIG_CRC32_SELFTEST=m
 CONFIG_CRC64=m
 CONFIG_XZ_DEC_TEST=m
@@ -591,6 +593,7 @@ CONFIG_TEST_OVERFLOW=m
 CONFIG_TEST_RHASHTABLE=m
 CONFIG_TEST_HASH=m
 CONFIG_TEST_IDA=m
+CONFIG_TEST_BITOPS=m
 CONFIG_TEST_VMALLOC=m
 CONFIG_TEST_USER_COPY=m
 CONFIG_TEST_BPF=m
diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig
index e8a1920aded7..5b1e72ce53f8 100644
--- a/arch/m68k/configs/mvme16x_defconfig
+++ b/arch/m68k/configs/mvme16x_defconfig
@@ -543,6 +543,7 @@ CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_SALSA20=m
@@ -564,6 +565,7 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
+CONFIG_PRIME_NUMBERS=m
 CONFIG_CRC32_SELFTEST=m
 CONFIG_CRC64=m
 CONFIG_XZ_DEC_TEST=m
@@ -592,6 +594,7 @@ CONFIG_TEST_OVERFLOW=m
 CONFIG_TEST_RHASHTABLE=m
 CONFIG_TEST_HASH=m
 CONFIG_TEST_IDA=m
+CONFIG_TEST_BITOPS=m
 CONFIG_TEST_VMALLOC=m
 CONFIG_TEST_USER_COPY=m
 CONFIG_TEST_BPF=m
diff --git a/arch/m68k/configs/q40_defconfig b/arch/m68k/configs/q40_defconfig
index 2cbf416fc725..c3a3dcf30fb9 100644
--- a/arch/m68k/configs/q40_defconfig
+++ b/arch/m68k/configs/q40_defconfig
@@ -561,6 +561,7 @@ CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_SALSA20=m
@@ -582,6 +583,7 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
+CONFIG_PRIME_NUMBERS=m
 CONFIG_CRC32_SELFTEST=m
 CONFIG_CRC64=m
 CONFIG_XZ_DEC_TEST=m
@@ -610,6 +612,7 @@ CONFIG_TEST_OVERFLOW=m
 CONFIG_TEST_RHASHTABLE=m
 CONFIG_TEST_HASH=m
 CONFIG_TEST_IDA=m
+CONFIG_TEST_BITOPS=m
 CONFIG_TEST_VMALLOC=m
 CONFIG_TEST_USER_COPY=m
 CONFIG_TEST_BPF=m
diff --git a/arch/m68k/configs/sun3_defconfig b/arch/m68k/configs/sun3_defconfig
index fed3cc7abcc4..3c00e52f1bf0 100644
--- a/arch/m68k/configs/sun3_defconfig
+++ b/arch/m68k/configs/sun3_defconfig
@@ -545,6 +545,7 @@ CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_SALSA20=m
@@ -566,6 +567,7 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
+CONFIG_PRIME_NUMBERS=m
 CONFIG_CRC32_SELFTEST=m
 CONFIG_CRC64=m
 CONFIG_XZ_DEC_TEST=m
@@ -593,6 +595,7 @@ CONFIG_TEST_OVERFLOW=m
 CONFIG_TEST_RHASHTABLE=m
 CONFIG_TEST_HASH=m
 CONFIG_TEST_IDA=m
+CONFIG_TEST_BITOPS=m
 CONFIG_TEST_VMALLOC=m
 CONFIG_TEST_USER_COPY=m
 CONFIG_TEST_BPF=m
diff --git a/arch/m68k/configs/sun3x_defconfig b/arch/m68k/configs/sun3x_defconfig
index 0954fde256e6..241242d73cbd 100644
--- a/arch/m68k/configs/sun3x_defconfig
+++ b/arch/m68k/configs/sun3x_defconfig
@@ -544,6 +544,7 @@ CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_SALSA20=m
@@ -565,6 +566,7 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
+CONFIG_PRIME_NUMBERS=m
 CONFIG_CRC32_SELFTEST=m
 CONFIG_CRC64=m
 CONFIG_XZ_DEC_TEST=m
@@ -593,6 +595,7 @@ CONFIG_TEST_OVERFLOW=m
 CONFIG_TEST_RHASHTABLE=m
 CONFIG_TEST_HASH=m
 CONFIG_TEST_IDA=m
+CONFIG_TEST_BITOPS=m
 CONFIG_TEST_VMALLOC=m
 CONFIG_TEST_USER_COPY=m
 CONFIG_TEST_BPF=m
diff --git a/arch/m68k/emu/nfblock.c b/arch/m68k/emu/nfblock.c
index c3a630440512..92d26c812441 100644
--- a/arch/m68k/emu/nfblock.c
+++ b/arch/m68k/emu/nfblock.c
@@ -59,9 +59,9 @@ struct nfhd_device {
 	struct gendisk *disk;
 };
 
-static blk_qc_t nfhd_make_request(struct request_queue *queue, struct bio *bio)
+static blk_qc_t nfhd_submit_bio(struct bio *bio)
 {
-	struct nfhd_device *dev = queue->queuedata;
+	struct nfhd_device *dev = bio->bi_disk->private_data;
 	struct bio_vec bvec;
 	struct bvec_iter iter;
 	int dir, len, shift;
@@ -93,6 +93,7 @@ static int nfhd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
 
 static const struct block_device_operations nfhd_ops = {
 	.owner	= THIS_MODULE,
+	.submit_bio = nfhd_submit_bio,
 	.getgeo	= nfhd_getgeo,
 };
 
@@ -118,11 +119,10 @@ static int __init nfhd_init_one(int id, u32 blocks, u32 bsize)
 	dev->bsize = bsize;
 	dev->bshift = ffs(bsize) - 10;
 
-	dev->queue = blk_alloc_queue(nfhd_make_request, NUMA_NO_NODE);
+	dev->queue = blk_alloc_queue(NUMA_NO_NODE);
 	if (dev->queue == NULL)
 		goto free_dev;
 
-	dev->queue->queuedata = dev;
 	blk_queue_logical_block_size(dev->queue, bsize);
 
 	dev->disk = alloc_disk(16);
diff --git a/arch/m68k/include/asm/atomic.h b/arch/m68k/include/asm/atomic.h
index 47228b0d4163..756c5cc58f94 100644
--- a/arch/m68k/include/asm/atomic.h
+++ b/arch/m68k/include/asm/atomic.h
@@ -16,8 +16,6 @@
  * We do not have SMP m68k systems, so we don't have to deal with that.
  */
 
-#define ATOMIC_INIT(i)	{ (i) }
-
 #define atomic_read(v)		READ_ONCE((v)->counter)
 #define atomic_set(v, i)	WRITE_ONCE(((v)->counter), (i))
 
diff --git a/arch/m68k/include/asm/raw_io.h b/arch/m68k/include/asm/raw_io.h
index 8a6dc6e5a279..911826ea83ce 100644
--- a/arch/m68k/include/asm/raw_io.h
+++ b/arch/m68k/include/asm/raw_io.h
@@ -80,14 +80,14 @@
 	({ u16 __v = le16_to_cpu(*(__force volatile u16 *) (addr)); __v; })
 
 #define rom_out_8(addr, b)	\
-	({u8 __w, __v = (b);  u32 _addr = ((u32) (addr)); \
+	({u8 __maybe_unused __w, __v = (b);  u32 _addr = ((u32) (addr)); \
 	__w = ((*(__force volatile u8 *)  ((_addr | 0x10000) + (__v<<1)))); })
 #define rom_out_be16(addr, w)	\
-	({u16 __w, __v = (w); u32 _addr = ((u32) (addr)); \
+	({u16 __maybe_unused __w, __v = (w); u32 _addr = ((u32) (addr)); \
 	__w = ((*(__force volatile u16 *) ((_addr & 0xFFFF0000UL) + ((__v & 0xFF)<<1)))); \
 	__w = ((*(__force volatile u16 *) ((_addr | 0x10000) + ((__v >> 8)<<1)))); })
 #define rom_out_le16(addr, w)	\
-	({u16 __w, __v = (w); u32 _addr = ((u32) (addr)); \
+	({u16 __maybe_unused __w, __v = (w); u32 _addr = ((u32) (addr)); \
 	__w = ((*(__force volatile u16 *) ((_addr & 0xFFFF0000UL) + ((__v >> 8)<<1)))); \
 	__w = ((*(__force volatile u16 *) ((_addr | 0x10000) + ((__v & 0xFF)<<1)))); })
 
diff --git a/arch/m68k/kernel/process.c b/arch/m68k/kernel/process.c
index 90ae376b7ab1..6492a2c54dbc 100644
--- a/arch/m68k/kernel/process.c
+++ b/arch/m68k/kernel/process.c
@@ -125,9 +125,6 @@ asmlinkage int m68k_clone(struct pt_regs *regs)
 		.tls		= regs->d5,
 	};
 
-	if (!legacy_clone_args_valid(&args))
-		return -EINVAL;
-
 	return _do_fork(&args);
 }
 
@@ -141,9 +138,8 @@ asmlinkage int m68k_clone3(struct pt_regs *regs)
 	return sys_clone3((struct clone_args __user *)regs->d1, regs->d2);
 }
 
-int copy_thread_tls(unsigned long clone_flags, unsigned long usp,
-		    unsigned long arg, struct task_struct *p,
-		    unsigned long tls)
+int copy_thread(unsigned long clone_flags, unsigned long usp, unsigned long arg,
+		struct task_struct *p, unsigned long tls)
 {
 	struct fork_frame {
 		struct switch_stack sw;
diff --git a/arch/m68k/kernel/setup_no.c b/arch/m68k/kernel/setup_no.c
index e779b19e0193..f66f4b1d062e 100644
--- a/arch/m68k/kernel/setup_no.c
+++ b/arch/m68k/kernel/setup_no.c
@@ -138,7 +138,8 @@ void __init setup_arch(char **cmdline_p)
 	pr_debug("MEMORY -> ROMFS=0x%p-0x%06lx MEM=0x%06lx-0x%06lx\n ",
 		 __bss_stop, memory_start, memory_start, memory_end);
 
-	memblock_add(memory_start, memory_end - memory_start);
+	memblock_add(_rambase, memory_end - _rambase);
+	memblock_reserve(_rambase, memory_start - _rambase);
 
 	/* Keep a copy of command line */
 	*cmdline_p = &command_line[0];
diff --git a/arch/m68k/kernel/signal.c b/arch/m68k/kernel/signal.c
index b3ff39588f36..fc034fd19798 100644
--- a/arch/m68k/kernel/signal.c
+++ b/arch/m68k/kernel/signal.c
@@ -61,25 +61,25 @@
 #define	FMT4SIZE	0
 #else
 #define	FORMAT		0
-#define	FMT4SIZE	sizeof(((struct frame *)0)->un.fmt4)
+#define	FMT4SIZE	sizeof_field(struct frame, un.fmt4)
 #endif
 
 static const int frame_size_change[16] = {
-  [1]	= -1, /* sizeof(((struct frame *)0)->un.fmt1), */
-  [2]	= sizeof(((struct frame *)0)->un.fmt2),
-  [3]	= sizeof(((struct frame *)0)->un.fmt3),
+  [1]	= -1, /* sizeof_field(struct frame, un.fmt1), */
+  [2]	= sizeof_field(struct frame, un.fmt2),
+  [3]	= sizeof_field(struct frame, un.fmt3),
   [4]	= FMT4SIZE,
-  [5]	= -1, /* sizeof(((struct frame *)0)->un.fmt5), */
-  [6]	= -1, /* sizeof(((struct frame *)0)->un.fmt6), */
-  [7]	= sizeof(((struct frame *)0)->un.fmt7),
-  [8]	= -1, /* sizeof(((struct frame *)0)->un.fmt8), */
-  [9]	= sizeof(((struct frame *)0)->un.fmt9),
-  [10]	= sizeof(((struct frame *)0)->un.fmta),
-  [11]	= sizeof(((struct frame *)0)->un.fmtb),
-  [12]	= -1, /* sizeof(((struct frame *)0)->un.fmtc), */
-  [13]	= -1, /* sizeof(((struct frame *)0)->un.fmtd), */
-  [14]	= -1, /* sizeof(((struct frame *)0)->un.fmte), */
-  [15]	= -1, /* sizeof(((struct frame *)0)->un.fmtf), */
+  [5]	= -1, /* sizeof_field(struct frame, un.fmt5), */
+  [6]	= -1, /* sizeof_field(struct frame, un.fmt6), */
+  [7]	= sizeof_field(struct frame, un.fmt7),
+  [8]	= -1, /* sizeof_field(struct frame, un.fmt8), */
+  [9]	= sizeof_field(struct frame, un.fmt9),
+  [10]	= sizeof_field(struct frame, un.fmta),
+  [11]	= sizeof_field(struct frame, un.fmtb),
+  [12]	= -1, /* sizeof_field(struct frame, un.fmtc), */
+  [13]	= -1, /* sizeof_field(struct frame, un.fmtd), */
+  [14]	= -1, /* sizeof_field(struct frame, un.fmte), */
+  [15]	= -1, /* sizeof_field(struct frame, un.fmtf), */
 };
 
 static inline int frame_extra_sizes(int f)
@@ -651,7 +651,7 @@ static int mangle_kernel_stack(struct pt_regs *regs, int formatvec,
 	} else {
 		struct switch_stack *sw = (struct switch_stack *)regs - 1;
 		/* yes, twice as much as max(sizeof(frame.un.fmt<x>)) */
-		unsigned long buf[sizeof(((struct frame *)0)->un) / 2];
+		unsigned long buf[sizeof_field(struct frame, un) / 2];
 
 		/* that'll make sure that expansion won't crap over data */
 		if (copy_from_user(buf + fsize / 4, fp, fsize))
diff --git a/arch/m68k/kernel/syscalls/syscall.tbl b/arch/m68k/kernel/syscalls/syscall.tbl
index f71b1bbcc198..1a4822de7292 100644
--- a/arch/m68k/kernel/syscalls/syscall.tbl
+++ b/arch/m68k/kernel/syscalls/syscall.tbl
@@ -435,6 +435,7 @@
 433	common	fspick				sys_fspick
 434	common	pidfd_open			sys_pidfd_open
 435	common	clone3				__sys_clone3
+436	common	close_range			sys_close_range
 437	common	openat2				sys_openat2
 438	common	pidfd_getfd			sys_pidfd_getfd
 439	common	faccessat2			sys_faccessat2
diff --git a/arch/m68k/mac/iop.c b/arch/m68k/mac/iop.c
index d3775afb0f07..c669a7644301 100644
--- a/arch/m68k/mac/iop.c
+++ b/arch/m68k/mac/iop.c
@@ -183,7 +183,7 @@ static __inline__ void iop_writeb(volatile struct mac_iop *iop, __u16 addr, __u8
 
 static __inline__ void iop_stop(volatile struct mac_iop *iop)
 {
-	iop->status_ctrl &= ~IOP_RUN;
+	iop->status_ctrl = IOP_AUTOINC;
 }
 
 static __inline__ void iop_start(volatile struct mac_iop *iop)
@@ -191,14 +191,9 @@ static __inline__ void iop_start(volatile struct mac_iop *iop)
 	iop->status_ctrl = IOP_RUN | IOP_AUTOINC;
 }
 
-static __inline__ void iop_bypass(volatile struct mac_iop *iop)
-{
-	iop->status_ctrl |= IOP_BYPASS;
-}
-
 static __inline__ void iop_interrupt(volatile struct mac_iop *iop)
 {
-	iop->status_ctrl |= IOP_IRQ;
+	iop->status_ctrl = IOP_IRQ | IOP_RUN | IOP_AUTOINC;
 }
 
 static int iop_alive(volatile struct mac_iop *iop)
@@ -244,7 +239,6 @@ void __init iop_preinit(void)
 		} else {
 			iop_base[IOP_NUM_SCC] = (struct mac_iop *) SCC_IOP_BASE_QUADRA;
 		}
-		iop_base[IOP_NUM_SCC]->status_ctrl = 0x87;
 		iop_scc_present = 1;
 	} else {
 		iop_base[IOP_NUM_SCC] = NULL;
@@ -256,7 +250,7 @@ void __init iop_preinit(void)
 		} else {
 			iop_base[IOP_NUM_ISM] = (struct mac_iop *) ISM_IOP_BASE_QUADRA;
 		}
-		iop_base[IOP_NUM_ISM]->status_ctrl = 0;
+		iop_stop(iop_base[IOP_NUM_ISM]);
 		iop_ism_present = 1;
 	} else {
 		iop_base[IOP_NUM_ISM] = NULL;
@@ -353,8 +347,8 @@ void iop_complete_message(struct iop_msg *msg)
 	int chan = msg->channel;
 	int i,offset;
 
-	iop_pr_debug("msg %p iop_num %d channel %d\n", msg, msg->iop_num,
-	             msg->channel);
+	iop_pr_debug("iop_num %d chan %d reply %*ph\n",
+		     msg->iop_num, msg->channel, IOP_MSG_LEN, msg->reply);
 
 	offset = IOP_ADDR_RECV_MSG + (msg->channel * IOP_MSG_LEN);
 
@@ -378,6 +372,9 @@ static void iop_do_send(struct iop_msg *msg)
 	volatile struct mac_iop *iop = iop_base[msg->iop_num];
 	int i,offset;
 
+	iop_pr_debug("iop_num %d chan %d message %*ph\n",
+		     msg->iop_num, msg->channel, IOP_MSG_LEN, msg->message);
+
 	offset = IOP_ADDR_SEND_MSG + (msg->channel * IOP_MSG_LEN);
 
 	for (i = 0 ; i < IOP_MSG_LEN ; i++, offset++) {
@@ -400,8 +397,6 @@ static void iop_handle_send(uint iop_num, uint chan)
 	struct iop_msg *msg;
 	int i,offset;
 
-	iop_pr_debug("iop_num %d chan %d\n", iop_num, chan);
-
 	iop_writeb(iop, IOP_ADDR_SEND_STATE + chan, IOP_MSG_IDLE);
 
 	if (!(msg = iop_send_queue[iop_num][chan])) return;
@@ -411,11 +406,15 @@ static void iop_handle_send(uint iop_num, uint chan)
 	for (i = 0 ; i < IOP_MSG_LEN ; i++, offset++) {
 		msg->reply[i] = iop_readb(iop, offset);
 	}
+	iop_pr_debug("iop_num %d chan %d reply %*ph\n",
+		     iop_num, chan, IOP_MSG_LEN, msg->reply);
+
 	if (msg->handler) (*msg->handler)(msg);
 	msg->status = IOP_MSGSTATUS_UNUSED;
 	msg = msg->next;
 	iop_send_queue[iop_num][chan] = msg;
-	if (msg) iop_do_send(msg);
+	if (msg && iop_readb(iop, IOP_ADDR_SEND_STATE + chan) == IOP_MSG_IDLE)
+		iop_do_send(msg);
 }
 
 /*
@@ -429,8 +428,6 @@ static void iop_handle_recv(uint iop_num, uint chan)
 	int i,offset;
 	struct iop_msg *msg;
 
-	iop_pr_debug("iop_num %d chan %d\n", iop_num, chan);
-
 	msg = iop_get_unused_msg();
 	msg->iop_num = iop_num;
 	msg->channel = chan;
@@ -442,6 +439,8 @@ static void iop_handle_recv(uint iop_num, uint chan)
 	for (i = 0 ; i < IOP_MSG_LEN ; i++, offset++) {
 		msg->message[i] = iop_readb(iop, offset);
 	}
+	iop_pr_debug("iop_num %d chan %d message %*ph\n",
+		     iop_num, chan, IOP_MSG_LEN, msg->message);
 
 	iop_writeb(iop, IOP_ADDR_RECV_STATE + chan, IOP_MSG_RCVD);
 
@@ -451,9 +450,7 @@ static void iop_handle_recv(uint iop_num, uint chan)
 	if (msg->handler) {
 		(*msg->handler)(msg);
 	} else {
-		iop_pr_debug("unclaimed message on iop_num %d chan %d\n",
-		             iop_num, chan);
-		iop_pr_debug("%*ph\n", IOP_MSG_LEN, msg->message);
+		memset(msg->reply, 0, IOP_MSG_LEN);
 		iop_complete_message(msg);
 	}
 }
@@ -489,16 +486,12 @@ int iop_send_message(uint iop_num, uint chan, void *privdata,
 
 	if (!(q = iop_send_queue[iop_num][chan])) {
 		iop_send_queue[iop_num][chan] = msg;
+		iop_do_send(msg);
 	} else {
 		while (q->next) q = q->next;
 		q->next = msg;
 	}
 
-	if (iop_readb(iop_base[iop_num],
-	    IOP_ADDR_SEND_STATE + chan) == IOP_MSG_IDLE) {
-		iop_do_send(msg);
-	}
-
 	return 0;
 }
 
@@ -567,35 +560,34 @@ irqreturn_t iop_ism_irq(int irq, void *dev_id)
 	int i,state;
 	u8 events = iop->status_ctrl & (IOP_INT0 | IOP_INT1);
 
-	iop_pr_debug("status %02X\n", iop->status_ctrl);
-
 	do {
+		iop_pr_debug("iop_num %d status %02X\n", iop_num,
+			     iop->status_ctrl);
+
 		/* INT0 indicates state change on an outgoing message channel */
 		if (events & IOP_INT0) {
 			iop->status_ctrl = IOP_INT0 | IOP_RUN | IOP_AUTOINC;
-			iop_pr_debug("new status %02X, send states",
-				     iop->status_ctrl);
 			for (i = 0; i < NUM_IOP_CHAN; i++) {
 				state = iop_readb(iop, IOP_ADDR_SEND_STATE + i);
-				iop_pr_cont(" %02X", state);
 				if (state == IOP_MSG_COMPLETE)
 					iop_handle_send(iop_num, i);
+				else if (state != IOP_MSG_IDLE)
+					iop_pr_debug("chan %d send state %02X\n",
+						     i, state);
 			}
-			iop_pr_cont("\n");
 		}
 
 		/* INT1 for incoming messages */
 		if (events & IOP_INT1) {
 			iop->status_ctrl = IOP_INT1 | IOP_RUN | IOP_AUTOINC;
-			iop_pr_debug("new status %02X, recv states",
-				     iop->status_ctrl);
 			for (i = 0; i < NUM_IOP_CHAN; i++) {
 				state = iop_readb(iop, IOP_ADDR_RECV_STATE + i);
-				iop_pr_cont(" %02X", state);
 				if (state == IOP_MSG_NEW)
 					iop_handle_recv(iop_num, i);
+				else if (state != IOP_MSG_IDLE)
+					iop_pr_debug("chan %d recv state %02X\n",
+						     i, state);
 			}
-			iop_pr_cont("\n");
 		}
 
 		events = iop->status_ctrl & (IOP_INT0 | IOP_INT1);
diff --git a/arch/m68k/mm/mcfmmu.c b/arch/m68k/mm/mcfmmu.c
index 29f47923aa46..7d04210d34f0 100644
--- a/arch/m68k/mm/mcfmmu.c
+++ b/arch/m68k/mm/mcfmmu.c
@@ -174,7 +174,7 @@ void __init cf_bootmem_alloc(void)
 	m68k_memory[0].addr = _rambase;
 	m68k_memory[0].size = _ramend - _rambase;
 
-	memblock_add(m68k_memory[0].addr, m68k_memory[0].size);
+	memblock_add_node(m68k_memory[0].addr, m68k_memory[0].size, 0);
 
 	/* compute total pages in system */
 	num_pages = PFN_DOWN(_ramend - _rambase);
diff --git a/arch/m68k/sun3/Makefile b/arch/m68k/sun3/Makefile
index 9960c46d303c..4e99e17d82ea 100644
--- a/arch/m68k/sun3/Makefile
+++ b/arch/m68k/sun3/Makefile
@@ -5,4 +5,4 @@
 
 obj-y	:= sun3ints.o sun3dvma.o idprom.o
 
-obj-$(CONFIG_SUN3) += config.o mmu_emu.o leds.o dvma.o intersil.o
+obj-$(CONFIG_SUN3) += config.o mmu_emu.o leds.o dvma.o intersil.o prom/
diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c
index 6527ec22f158..6cabeab9e2ba 100644
--- a/arch/microblaze/kernel/process.c
+++ b/arch/microblaze/kernel/process.c
@@ -54,8 +54,8 @@ void flush_thread(void)
 {
 }
 
-int copy_thread(unsigned long clone_flags, unsigned long usp,
-		unsigned long arg, struct task_struct *p)
+int copy_thread(unsigned long clone_flags, unsigned long usp, unsigned long arg,
+		struct task_struct *p, unsigned long tls)
 {
 	struct pt_regs *childregs = task_pt_regs(p);
 	struct thread_info *ti = task_thread_info(p);
@@ -114,7 +114,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 	 *  which contains TLS area
 	 */
 	if (clone_flags & CLONE_SETTLS)
-		childregs->r21 = childregs->r10;
+		childregs->r21 = tls;
 
 	return 0;
 }
diff --git a/arch/microblaze/kernel/syscalls/syscall.tbl b/arch/microblaze/kernel/syscalls/syscall.tbl
index edacc4561f2b..a3f4be8e7238 100644
--- a/arch/microblaze/kernel/syscalls/syscall.tbl
+++ b/arch/microblaze/kernel/syscalls/syscall.tbl
@@ -441,6 +441,7 @@
 433	common	fspick				sys_fspick
 434	common	pidfd_open			sys_pidfd_open
 435	common	clone3				sys_clone3
+436	common	close_range			sys_close_range
 437	common	openat2				sys_openat2
 438	common	pidfd_getfd			sys_pidfd_getfd
 439	common	faccessat2			sys_faccessat2
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 6fee1a133e9d..001c77cd76b9 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -51,7 +51,6 @@ config MIPS
 	select HAVE_CBPF_JIT if !64BIT && !CPU_MICROMIPS
 	select HAVE_CONTEXT_TRACKING
 	select HAVE_TIF_NOHZ
-	select HAVE_COPY_THREAD_TLS
 	select HAVE_C_RECORDMCOUNT
 	select HAVE_DEBUG_KMEMLEAK
 	select HAVE_DEBUG_STACKOVERFLOW
@@ -367,6 +366,7 @@ config MACH_JAZZ
 	select ARC_PROMLIB
 	select ARCH_MIGHT_HAVE_PC_PARPORT
 	select ARCH_MIGHT_HAVE_PC_SERIO
+	select DMA_OPS
 	select FW_ARC
 	select FW_ARC32
 	select ARCH_MAY_HAVE_PC_FDC
diff --git a/arch/mips/boot/dts/ingenic/gcw0.dts b/arch/mips/boot/dts/ingenic/gcw0.dts
index 8d22828787d8..bc72304a2440 100644
--- a/arch/mips/boot/dts/ingenic/gcw0.dts
+++ b/arch/mips/boot/dts/ingenic/gcw0.dts
@@ -92,7 +92,7 @@
 			"MIC1N", "Built-in Mic";
 		simple-audio-card,pin-switches = "Speaker", "Headphones";
 
-		simple-audio-card,hp-det-gpio = <&gpf 21 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,hp-det-gpio = <&gpf 21 GPIO_ACTIVE_LOW>;
 		simple-audio-card,aux-devs = <&speaker_amp>, <&headphones_amp>;
 
 		simple-audio-card,bitclock-master = <&dai_codec>;
diff --git a/arch/mips/fw/arc/arc_con.c b/arch/mips/fw/arc/arc_con.c
index 365e3913231e..7fdce236b298 100644
--- a/arch/mips/fw/arc/arc_con.c
+++ b/arch/mips/fw/arc/arc_con.c
@@ -28,7 +28,9 @@ static void prom_console_write(struct console *co, const char *s,
 
 static int prom_console_setup(struct console *co, char *options)
 {
-	return !(prom_flags & PROM_FLAG_USE_AS_CONSOLE);
+	if (prom_flags & PROM_FLAG_USE_AS_CONSOLE)
+		return 0;
+	return -ENODEV;
 }
 
 static struct console arc_cons = {
diff --git a/arch/mips/include/asm/atomic.h b/arch/mips/include/asm/atomic.h
index e5ac88392d1f..f904084fcb1f 100644
--- a/arch/mips/include/asm/atomic.h
+++ b/arch/mips/include/asm/atomic.h
@@ -45,7 +45,6 @@ static __always_inline type pfx##_xchg(pfx##_t *v, type n)		\
 	return xchg(&v->counter, n);					\
 }
 
-#define ATOMIC_INIT(i)		{ (i) }
 ATOMIC_OPS(atomic, int)
 
 #ifdef CONFIG_64BIT
diff --git a/arch/mips/include/asm/seccomp.h b/arch/mips/include/asm/seccomp.h
index e383d7e27b93..aa809589a181 100644
--- a/arch/mips/include/asm/seccomp.h
+++ b/arch/mips/include/asm/seccomp.h
@@ -9,12 +9,12 @@ static inline const int *get_compat_mode1_syscalls(void)
 	static const int syscalls_O32[] = {
 		__NR_O32_Linux + 3, __NR_O32_Linux + 4,
 		__NR_O32_Linux + 1, __NR_O32_Linux + 193,
-		0, /* null terminated */
+		-1, /* negative terminated */
 	};
 	static const int syscalls_N32[] = {
 		__NR_N32_Linux + 0, __NR_N32_Linux + 1,
 		__NR_N32_Linux + 58, __NR_N32_Linux + 211,
-		0, /* null terminated */
+		-1, /* negative terminated */
 	};
 
 	if (IS_ENABLED(CONFIG_MIPS32_O32) && test_thread_flag(TIF_32BIT_REGS))
diff --git a/arch/mips/include/asm/unroll.h b/arch/mips/include/asm/unroll.h
index c628747d4ecd..7dd4a80e05d6 100644
--- a/arch/mips/include/asm/unroll.h
+++ b/arch/mips/include/asm/unroll.h
@@ -19,15 +19,13 @@
 								\
 	/*							\
 	 * We can't unroll if the number of iterations isn't	\
-	 * compile-time constant. Unfortunately GCC versions	\
-	 * up until 4.6 tend to miss obvious constants & cause	\
+	 * compile-time constant. Unfortunately clang versions	\
+	 * up until 8.0 tend to miss obvious constants & cause	\
 	 * this check to fail, even though they go on to	\
 	 * generate reasonable code for the switch statement,	\
 	 * so we skip the sanity check for those compilers.	\
 	 */							\
-	BUILD_BUG_ON((CONFIG_GCC_VERSION >= 40700 ||		\
-		      CONFIG_CLANG_VERSION >= 80000) &&		\
-		     !__builtin_constant_p(times));		\
+	BUILD_BUG_ON(!__builtin_constant_p(times));		\
 								\
 	switch (times) {					\
 	case 32: fn(__VA_ARGS__); /* fall through */		\
diff --git a/arch/mips/kernel/kprobes.c b/arch/mips/kernel/kprobes.c
index 6cfae2411c04..d043c2f897fc 100644
--- a/arch/mips/kernel/kprobes.c
+++ b/arch/mips/kernel/kprobes.c
@@ -86,9 +86,9 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p)
 		goto out;
 	}
 
-	if ((probe_kernel_read(&prev_insn, p->addr - 1,
-				sizeof(mips_instruction)) == 0) &&
-				insn_has_delayslot(prev_insn)) {
+	if (copy_from_kernel_nofault(&prev_insn, p->addr - 1,
+			sizeof(mips_instruction)) == 0 &&
+	    insn_has_delayslot(prev_insn)) {
 		pr_notice("Kprobes for branch delayslot are not supported\n");
 		ret = -EINVAL;
 		goto out;
diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index ff5320b79100..f5dc316a826a 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -119,8 +119,9 @@ int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
 /*
  * Copy architecture-specific thread state
  */
-int copy_thread_tls(unsigned long clone_flags, unsigned long usp,
-	unsigned long kthread_arg, struct task_struct *p, unsigned long tls)
+int copy_thread(unsigned long clone_flags, unsigned long usp,
+		unsigned long kthread_arg, struct task_struct *p,
+		unsigned long tls)
 {
 	struct thread_info *ti = task_thread_info(p);
 	struct pt_regs *childregs, *regs = current_pt_regs();
diff --git a/arch/mips/kernel/syscalls/syscall_n32.tbl b/arch/mips/kernel/syscalls/syscall_n32.tbl
index f777141f5256..501bc09643bd 100644
--- a/arch/mips/kernel/syscalls/syscall_n32.tbl
+++ b/arch/mips/kernel/syscalls/syscall_n32.tbl
@@ -374,6 +374,7 @@
 433	n32	fspick				sys_fspick
 434	n32	pidfd_open			sys_pidfd_open
 435	n32	clone3				__sys_clone3
+436	n32	close_range			sys_close_range
 437	n32	openat2				sys_openat2
 438	n32	pidfd_getfd			sys_pidfd_getfd
 439	n32	faccessat2			sys_faccessat2
diff --git a/arch/mips/kernel/syscalls/syscall_n64.tbl b/arch/mips/kernel/syscalls/syscall_n64.tbl
index da8c76394e17..391acbf425a0 100644
--- a/arch/mips/kernel/syscalls/syscall_n64.tbl
+++ b/arch/mips/kernel/syscalls/syscall_n64.tbl
@@ -350,6 +350,7 @@
 433	n64	fspick				sys_fspick
 434	n64	pidfd_open			sys_pidfd_open
 435	n64	clone3				__sys_clone3
+436	n64	close_range			sys_close_range
 437	n64	openat2				sys_openat2
 438	n64	pidfd_getfd			sys_pidfd_getfd
 439	n64	faccessat2			sys_faccessat2
diff --git a/arch/mips/kernel/syscalls/syscall_o32.tbl b/arch/mips/kernel/syscalls/syscall_o32.tbl
index 13280625d312..d28f12f641d3 100644
--- a/arch/mips/kernel/syscalls/syscall_o32.tbl
+++ b/arch/mips/kernel/syscalls/syscall_o32.tbl
@@ -423,6 +423,7 @@
 433	o32	fspick				sys_fspick
 434	o32	pidfd_open			sys_pidfd_open
 435	o32	clone3				__sys_clone3
+436	o32	close_range			sys_close_range
 437	o32	openat2				sys_openat2
 438	o32	pidfd_getfd			sys_pidfd_getfd
 439	o32	faccessat2			sys_faccessat2
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 7c32c956156a..f655af68176c 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -723,12 +723,14 @@ static int simulate_loongson3_cpucfg(struct pt_regs *regs,
 		perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS, 1, regs, 0);
 
 		/* Do not emulate on unsupported core models. */
-		if (!loongson3_cpucfg_emulation_enabled(&current_cpu_data))
+		preempt_disable();
+		if (!loongson3_cpucfg_emulation_enabled(&current_cpu_data)) {
+			preempt_enable();
 			return -1;
-
+		}
 		regs->regs[rd] = loongson3_cpucfg_read_synthesized(
 			&current_cpu_data, sel);
-
+		preempt_enable();
 		return 0;
 	}
 
@@ -2169,6 +2171,7 @@ static void configure_status(void)
 
 	change_c0_status(ST0_CU|ST0_MX|ST0_RE|ST0_FR|ST0_BEV|ST0_TS|ST0_KX|ST0_SX|ST0_UX,
 			 status_set);
+	back_to_back_c0_hazard();
 }
 
 unsigned int hwrena;
diff --git a/arch/mips/kvm/emulate.c b/arch/mips/kvm/emulate.c
index 5ae82d925197..d242300cacc0 100644
--- a/arch/mips/kvm/emulate.c
+++ b/arch/mips/kvm/emulate.c
@@ -1722,6 +1722,7 @@ enum emulation_result kvm_mips_emulate_store(union mips_instruction inst,
 			  vcpu->arch.gprs[rt], *(u32 *)data);
 		break;
 
+#if defined(CONFIG_64BIT) && defined(CONFIG_KVM_MIPS_VZ)
 	case sdl_op:
 		run->mmio.phys_addr = kvm_mips_callbacks->gva_to_gpa(
 					vcpu->arch.host_cp0_badvaddr) & (~0x7);
@@ -1815,6 +1816,7 @@ enum emulation_result kvm_mips_emulate_store(union mips_instruction inst,
 			  vcpu->arch.pc, vcpu->arch.host_cp0_badvaddr,
 			  vcpu->arch.gprs[rt], *(u64 *)data);
 		break;
+#endif
 
 #ifdef CONFIG_CPU_LOONGSON64
 	case sdc2_op:
@@ -2002,6 +2004,7 @@ enum emulation_result kvm_mips_emulate_load(union mips_instruction inst,
 		}
 		break;
 
+#if defined(CONFIG_64BIT) && defined(CONFIG_KVM_MIPS_VZ)
 	case ldl_op:
 		run->mmio.phys_addr = kvm_mips_callbacks->gva_to_gpa(
 					vcpu->arch.host_cp0_badvaddr) & (~0x7);
@@ -2073,6 +2076,7 @@ enum emulation_result kvm_mips_emulate_load(union mips_instruction inst,
 			break;
 		}
 		break;
+#endif
 
 #ifdef CONFIG_CPU_LOONGSON64
 	case ldc2_op:
diff --git a/arch/mips/kvm/mips.c b/arch/mips/kvm/mips.c
index 521bd5891e84..666d3350b4ac 100644
--- a/arch/mips/kvm/mips.c
+++ b/arch/mips/kvm/mips.c
@@ -67,8 +67,10 @@ struct kvm_stats_debugfs_item debugfs_entries[] = {
 	VCPU_STAT("vz_ghfc", vz_ghfc_exits),
 	VCPU_STAT("vz_gpa", vz_gpa_exits),
 	VCPU_STAT("vz_resvd", vz_resvd_exits),
+#ifdef CONFIG_CPU_LOONGSON64
 	VCPU_STAT("vz_cpucfg", vz_cpucfg_exits),
 #endif
+#endif
 	VCPU_STAT("halt_successful_poll", halt_successful_poll),
 	VCPU_STAT("halt_attempted_poll", halt_attempted_poll),
 	VCPU_STAT("halt_poll_invalid", halt_poll_invalid),
diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c
index aa37545ebe8f..b10342018d19 100644
--- a/arch/mips/lantiq/xway/sysctrl.c
+++ b/arch/mips/lantiq/xway/sysctrl.c
@@ -514,8 +514,8 @@ void __init ltq_soc_init(void)
 		clkdev_add_pmu("1e10b308.eth", NULL, 0, 0, PMU_SWITCH |
 			       PMU_PPE_DP | PMU_PPE_TC);
 		clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF);
-		clkdev_add_pmu("1e108000.gswip", "gphy0", 0, 0, PMU_GPHY);
-		clkdev_add_pmu("1e108000.gswip", "gphy1", 0, 0, PMU_GPHY);
+		clkdev_add_pmu("1e108000.switch", "gphy0", 0, 0, PMU_GPHY);
+		clkdev_add_pmu("1e108000.switch", "gphy1", 0, 0, PMU_GPHY);
 		clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU);
 		clkdev_add_pmu("1e116000.mei", "afe", 1, 2, PMU_ANALOG_DSL_AFE);
 		clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE);
@@ -538,8 +538,8 @@ void __init ltq_soc_init(void)
 				PMU_SWITCH | PMU_PPE_DPLUS | PMU_PPE_DPLUM |
 				PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 |
 				PMU_PPE_QSB | PMU_PPE_TOP);
-		clkdev_add_pmu("1e108000.gswip", "gphy0", 0, 0, PMU_GPHY);
-		clkdev_add_pmu("1e108000.gswip", "gphy1", 0, 0, PMU_GPHY);
+		clkdev_add_pmu("1e108000.switch", "gphy0", 0, 0, PMU_GPHY);
+		clkdev_add_pmu("1e108000.switch", "gphy1", 0, 0, PMU_GPHY);
 		clkdev_add_pmu("1e103000.sdio", NULL, 1, 0, PMU_SDIO);
 		clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU);
 		clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE);
diff --git a/arch/mips/lib/dump_tlb.c b/arch/mips/lib/dump_tlb.c
index 5a418ba5e75f..4256423632c4 100644
--- a/arch/mips/lib/dump_tlb.c
+++ b/arch/mips/lib/dump_tlb.c
@@ -79,7 +79,7 @@ static void dump_tlb(int first, int last)
 	unsigned int pagemask, guestctl1 = 0, c0, c1, i;
 	unsigned long asidmask = cpu_asid_mask(&current_cpu_data);
 	int asidwidth = DIV_ROUND_UP(ilog2(asidmask) + 1, 4);
-	unsigned long uninitialized_var(s_mmid);
+	unsigned long s_mmid;
 #ifdef CONFIG_32BIT
 	bool xpa = cpu_has_xpa && (read_c0_pagegrain() & PG_ELPA);
 	int pwidth = xpa ? 11 : 8;
diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c
index 336b58173dc7..6c7bbfe35ba3 100644
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -83,7 +83,7 @@ void setup_zero_pages(void)
 static void *__kmap_pgprot(struct page *page, unsigned long addr, pgprot_t prot)
 {
 	enum fixed_addresses idx;
-	unsigned int uninitialized_var(old_mmid);
+	unsigned int old_mmid;
 	unsigned long vaddr, flags, entrylo;
 	unsigned long old_ctx;
 	pte_t pte;
diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c
index 6677dcb72580..38e2894d5fa3 100644
--- a/arch/mips/mm/tlb-r4k.c
+++ b/arch/mips/mm/tlb-r4k.c
@@ -119,7 +119,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
 		if (size <= (current_cpu_data.tlbsizeftlbsets ?
 			     current_cpu_data.tlbsize / 8 :
 			     current_cpu_data.tlbsize / 2)) {
-			unsigned long old_entryhi, uninitialized_var(old_mmid);
+			unsigned long old_entryhi, old_mmid;
 			int newpid = cpu_asid(cpu, mm);
 
 			old_entryhi = read_c0_entryhi();
@@ -213,7 +213,7 @@ void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
 	int cpu = smp_processor_id();
 
 	if (cpu_context(cpu, vma->vm_mm) != 0) {
-		unsigned long uninitialized_var(old_mmid);
+		unsigned long old_mmid;
 		unsigned long flags, old_entryhi;
 		int idx;
 
@@ -382,7 +382,7 @@ void add_wired_entry(unsigned long entrylo0, unsigned long entrylo1,
 #ifdef CONFIG_XPA
 	panic("Broken for XPA kernels");
 #else
-	unsigned int uninitialized_var(old_mmid);
+	unsigned int old_mmid;
 	unsigned long flags;
 	unsigned long wired;
 	unsigned long old_pagemask;
diff --git a/arch/mips/pci/pci-xtalk-bridge.c b/arch/mips/pci/pci-xtalk-bridge.c
index 3b2552fb7735..9b3cc775c55e 100644
--- a/arch/mips/pci/pci-xtalk-bridge.c
+++ b/arch/mips/pci/pci-xtalk-bridge.c
@@ -627,9 +627,10 @@ static int bridge_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	domain = irq_domain_create_hierarchy(parent, 0, 8, fn,
 					     &bridge_domain_ops, NULL);
-	irq_domain_free_fwnode(fn);
-	if (!domain)
+	if (!domain) {
+		irq_domain_free_fwnode(fn);
 		return -ENOMEM;
+	}
 
 	pci_set_flags(PCI_PROBE_ONLY);
 
@@ -727,6 +728,7 @@ err_free_resource:
 	pci_free_resource_list(&host->windows);
 err_remove_domain:
 	irq_domain_remove(domain);
+	irq_domain_free_fwnode(fn);
 	return err;
 }
 
@@ -734,8 +736,10 @@ static int bridge_remove(struct platform_device *pdev)
 {
 	struct pci_bus *bus = platform_get_drvdata(pdev);
 	struct bridge_controller *bc = BRIDGE_CONTROLLER(bus);
+	struct fwnode_handle *fn = bc->domain->fwnode;
 
 	irq_domain_remove(bc->domain);
+	irq_domain_free_fwnode(fn);
 	pci_lock_rescan_remove();
 	pci_stop_root_bus(bus);
 	pci_remove_root_bus(bus);
diff --git a/arch/nds32/kernel/ftrace.c b/arch/nds32/kernel/ftrace.c
index 22ab77ea27ad..3763b3f8c3db 100644
--- a/arch/nds32/kernel/ftrace.c
+++ b/arch/nds32/kernel/ftrace.c
@@ -131,13 +131,14 @@ static int __ftrace_modify_code(unsigned long pc, unsigned long *old_insn,
 	unsigned long orig_insn[3];
 
 	if (validate) {
-		if (probe_kernel_read(orig_insn, (void *)pc, MCOUNT_INSN_SIZE))
+		if (copy_from_kernel_nofault(orig_insn, (void *)pc,
+				MCOUNT_INSN_SIZE))
 			return -EFAULT;
 		if (memcmp(orig_insn, old_insn, MCOUNT_INSN_SIZE))
 			return -EINVAL;
 	}
 
-	if (probe_kernel_write((void *)pc, new_insn, MCOUNT_INSN_SIZE))
+	if (copy_to_kernel_nofault((void *)pc, new_insn, MCOUNT_INSN_SIZE))
 		return -EPERM;
 
 	return 0;
diff --git a/arch/nds32/kernel/process.c b/arch/nds32/kernel/process.c
index 9712fd474f2c..e85bbbadc0e7 100644
--- a/arch/nds32/kernel/process.c
+++ b/arch/nds32/kernel/process.c
@@ -150,7 +150,7 @@ DEFINE_PER_CPU(struct task_struct *, __entry_task);
 
 asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");
 int copy_thread(unsigned long clone_flags, unsigned long stack_start,
-		unsigned long stk_sz, struct task_struct *p)
+		unsigned long stk_sz, struct task_struct *p, unsigned long tls)
 {
 	struct pt_regs *childregs = task_pt_regs(p);
 
@@ -170,7 +170,7 @@ int copy_thread(unsigned long clone_flags, unsigned long stack_start,
 		childregs->uregs[0] = 0;
 		childregs->osp = 0;
 		if (clone_flags & CLONE_SETTLS)
-			childregs->uregs[25] = childregs->uregs[3];
+			childregs->uregs[25] = tls;
 	}
 	/* cpu context switching  */
 	p->thread.cpu_context.pc = (unsigned long)ret_from_fork;
diff --git a/arch/nios2/kernel/entry.S b/arch/nios2/kernel/entry.S
index 3d8d1d0bcb64..da8442450e46 100644
--- a/arch/nios2/kernel/entry.S
+++ b/arch/nios2/kernel/entry.S
@@ -389,12 +389,7 @@ ENTRY(ret_from_interrupt)
  */
 ENTRY(sys_clone)
 	SAVE_SWITCH_STACK
-	addi	sp, sp, -4
-	stw	r7, 0(sp)	/* Pass 5th arg thru stack */
-	mov	r7, r6		/* 4th arg is 3rd of clone() */
-	mov	r6, zero	/* 3rd arg always 0 */
-	call	do_fork
-	addi	sp, sp, 4
+	call	nios2_clone
 	RESTORE_SWITCH_STACK
 	ret
 
diff --git a/arch/nios2/kernel/process.c b/arch/nios2/kernel/process.c
index 509e7855e8dc..0a42ab8e4c32 100644
--- a/arch/nios2/kernel/process.c
+++ b/arch/nios2/kernel/process.c
@@ -100,8 +100,8 @@ void flush_thread(void)
 {
 }
 
-int copy_thread(unsigned long clone_flags,
-		unsigned long usp, unsigned long arg, struct task_struct *p)
+int copy_thread(unsigned long clone_flags, unsigned long usp, unsigned long arg,
+		struct task_struct *p, unsigned long tls)
 {
 	struct pt_regs *childregs = task_pt_regs(p);
 	struct pt_regs *regs;
@@ -140,7 +140,7 @@ int copy_thread(unsigned long clone_flags,
 
 	/* Initialize tls register. */
 	if (clone_flags & CLONE_SETTLS)
-		childstack->r23 = regs->r8;
+		childstack->r23 = tls;
 
 	return 0;
 }
@@ -259,3 +259,20 @@ int dump_fpu(struct pt_regs *regs, elf_fpregset_t *r)
 {
 	return 0; /* Nios2 has no FPU and thus no FPU registers */
 }
+
+asmlinkage int nios2_clone(unsigned long clone_flags, unsigned long newsp,
+			   int __user *parent_tidptr, int __user *child_tidptr,
+			   unsigned long tls)
+{
+	struct kernel_clone_args args = {
+		.flags		= (lower_32_bits(clone_flags) & ~CSIGNAL),
+		.pidfd		= parent_tidptr,
+		.child_tid	= child_tidptr,
+		.parent_tid	= parent_tidptr,
+		.exit_signal	= (lower_32_bits(clone_flags) & CSIGNAL),
+		.stack		= newsp,
+		.tls		= tls,
+	};
+
+	return _do_fork(&args);
+}
diff --git a/arch/openrisc/Kconfig b/arch/openrisc/Kconfig
index 8588996165ae..7e94fe37cb2f 100644
--- a/arch/openrisc/Kconfig
+++ b/arch/openrisc/Kconfig
@@ -16,7 +16,6 @@ config OPENRISC
 	select HANDLE_DOMAIN_IRQ
 	select GPIOLIB
 	select HAVE_ARCH_TRACEHOOK
-	select HAVE_COPY_THREAD_TLS
 	select SPARSE_IRQ
 	select GENERIC_IRQ_CHIP
 	select GENERIC_IRQ_PROBE
diff --git a/arch/openrisc/kernel/dma.c b/arch/openrisc/kernel/dma.c
index c152a68811dd..345727638d52 100644
--- a/arch/openrisc/kernel/dma.c
+++ b/arch/openrisc/kernel/dma.c
@@ -74,8 +74,11 @@ void *arch_dma_set_uncached(void *cpu_addr, size_t size)
 	 * We need to iterate through the pages, clearing the dcache for
 	 * them and setting the cache-inhibit bit.
 	 */
+	mmap_read_lock(&init_mm);
 	error = walk_page_range(&init_mm, va, va + size, &set_nocache_walk_ops,
 			NULL);
+	mmap_read_unlock(&init_mm);
+
 	if (error)
 		return ERR_PTR(error);
 	return cpu_addr;
@@ -85,9 +88,11 @@ void arch_dma_clear_uncached(void *cpu_addr, size_t size)
 {
 	unsigned long va = (unsigned long)cpu_addr;
 
+	mmap_read_lock(&init_mm);
 	/* walk_page_range shouldn't be able to fail here */
 	WARN_ON(walk_page_range(&init_mm, va, va + size,
 			&clear_nocache_walk_ops, NULL));
+	mmap_read_unlock(&init_mm);
 }
 
 void arch_sync_dma_for_device(phys_addr_t addr, size_t size,
diff --git a/arch/openrisc/kernel/process.c b/arch/openrisc/kernel/process.c
index d7010e72450c..848f74c2c47a 100644
--- a/arch/openrisc/kernel/process.c
+++ b/arch/openrisc/kernel/process.c
@@ -116,7 +116,7 @@ void release_thread(struct task_struct *dead_task)
 extern asmlinkage void ret_from_fork(void);
 
 /*
- * copy_thread_tls
+ * copy_thread
  * @clone_flags: flags
  * @usp: user stack pointer or fn for kernel thread
  * @arg: arg to fn for kernel thread; always NULL for userspace thread
@@ -147,8 +147,8 @@ extern asmlinkage void ret_from_fork(void);
  */
 
 int
-copy_thread_tls(unsigned long clone_flags, unsigned long usp,
-		unsigned long arg, struct task_struct *p, unsigned long tls)
+copy_thread(unsigned long clone_flags, unsigned long usp, unsigned long arg,
+	    struct task_struct *p, unsigned long tls)
 {
 	struct pt_regs *userregs;
 	struct pt_regs *kregs;
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index 8e4c3708773d..3b0f53dd70bc 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -14,6 +14,7 @@ config PARISC
 	select ARCH_HAS_UBSAN_SANITIZE_ALL
 	select ARCH_NO_SG_CHAIN
 	select ARCH_SUPPORTS_MEMORY_FAILURE
+	select DMA_OPS
 	select RTC_CLASS
 	select RTC_DRV_GENERIC
 	select INIT_ALL_POSSIBLE
@@ -62,7 +63,6 @@ config PARISC
 	select HAVE_FTRACE_MCOUNT_RECORD if HAVE_DYNAMIC_FTRACE
 	select HAVE_KPROBES_ON_FTRACE
 	select HAVE_DYNAMIC_FTRACE_WITH_REGS
-	select HAVE_COPY_THREAD_TLS
 
 	help
 	  The PA-RISC microprocessor is designed by Hewlett-Packard and used
@@ -285,7 +285,7 @@ config SMP
 	  On a uniprocessor machine, the kernel will run faster if you say N.
 
 	  See also <file:Documentation/admin-guide/lockup-watchdogs.rst> and the SMP-HOWTO
-	  available at <http://www.tldp.org/docs.html#howto>.
+	  available at <https://www.tldp.org/docs.html#howto>.
 
 	  If you don't know what to do here, say N.
 
diff --git a/arch/parisc/include/asm/atomic.h b/arch/parisc/include/asm/atomic.h
index 118953d41763..03862320f779 100644
--- a/arch/parisc/include/asm/atomic.h
+++ b/arch/parisc/include/asm/atomic.h
@@ -136,8 +136,6 @@ ATOMIC_OPS(xor, ^=)
 #undef ATOMIC_OP_RETURN
 #undef ATOMIC_OP
 
-#define ATOMIC_INIT(i)	{ (i) }
-
 #ifdef CONFIG_64BIT
 
 #define ATOMIC64_INIT(i) { (i) }
@@ -212,6 +210,8 @@ atomic64_set(atomic64_t *v, s64 i)
 	_atomic_spin_unlock_irqrestore(v, flags);
 }
 
+#define atomic64_set_release(v, i)	atomic64_set((v), (i))
+
 static __inline__ s64
 atomic64_read(const atomic64_t *v)
 {
diff --git a/arch/parisc/include/asm/bitops.h b/arch/parisc/include/asm/bitops.h
index a09eaebfdfd0..aa4e883431c1 100644
--- a/arch/parisc/include/asm/bitops.h
+++ b/arch/parisc/include/asm/bitops.h
@@ -12,21 +12,6 @@
 #include <asm/barrier.h>
 #include <linux/atomic.h>
 
-/*
- * HP-PARISC specific bit operations
- * for a detailed description of the functions please refer
- * to include/asm-i386/bitops.h or kerneldoc
- */
-
-#if __BITS_PER_LONG == 64
-#define SHIFT_PER_LONG 6
-#else
-#define SHIFT_PER_LONG 5
-#endif
-
-#define CHOP_SHIFTCOUNT(x) (((unsigned long) (x)) & (BITS_PER_LONG - 1))
-
-
 /* See http://marc.theaimsgroup.com/?t=108826637900003 for discussion
  * on use of volatile and __*_bit() (set/clear/change):
  *	*_bit() want use of volatile.
@@ -35,10 +20,10 @@
 
 static __inline__ void set_bit(int nr, volatile unsigned long * addr)
 {
-	unsigned long mask = 1UL << CHOP_SHIFTCOUNT(nr);
+	unsigned long mask = BIT_MASK(nr);
 	unsigned long flags;
 
-	addr += (nr >> SHIFT_PER_LONG);
+	addr += BIT_WORD(nr);
 	_atomic_spin_lock_irqsave(addr, flags);
 	*addr |= mask;
 	_atomic_spin_unlock_irqrestore(addr, flags);
@@ -46,21 +31,21 @@ static __inline__ void set_bit(int nr, volatile unsigned long * addr)
 
 static __inline__ void clear_bit(int nr, volatile unsigned long * addr)
 {
-	unsigned long mask = ~(1UL << CHOP_SHIFTCOUNT(nr));
+	unsigned long mask = BIT_MASK(nr);
 	unsigned long flags;
 
-	addr += (nr >> SHIFT_PER_LONG);
+	addr += BIT_WORD(nr);
 	_atomic_spin_lock_irqsave(addr, flags);
-	*addr &= mask;
+	*addr &= ~mask;
 	_atomic_spin_unlock_irqrestore(addr, flags);
 }
 
 static __inline__ void change_bit(int nr, volatile unsigned long * addr)
 {
-	unsigned long mask = 1UL << CHOP_SHIFTCOUNT(nr);
+	unsigned long mask = BIT_MASK(nr);
 	unsigned long flags;
 
-	addr += (nr >> SHIFT_PER_LONG);
+	addr += BIT_WORD(nr);
 	_atomic_spin_lock_irqsave(addr, flags);
 	*addr ^= mask;
 	_atomic_spin_unlock_irqrestore(addr, flags);
@@ -68,12 +53,12 @@ static __inline__ void change_bit(int nr, volatile unsigned long * addr)
 
 static __inline__ int test_and_set_bit(int nr, volatile unsigned long * addr)
 {
-	unsigned long mask = 1UL << CHOP_SHIFTCOUNT(nr);
+	unsigned long mask = BIT_MASK(nr);
 	unsigned long old;
 	unsigned long flags;
 	int set;
 
-	addr += (nr >> SHIFT_PER_LONG);
+	addr += BIT_WORD(nr);
 	_atomic_spin_lock_irqsave(addr, flags);
 	old = *addr;
 	set = (old & mask) ? 1 : 0;
@@ -86,12 +71,12 @@ static __inline__ int test_and_set_bit(int nr, volatile unsigned long * addr)
 
 static __inline__ int test_and_clear_bit(int nr, volatile unsigned long * addr)
 {
-	unsigned long mask = 1UL << CHOP_SHIFTCOUNT(nr);
+	unsigned long mask = BIT_MASK(nr);
 	unsigned long old;
 	unsigned long flags;
 	int set;
 
-	addr += (nr >> SHIFT_PER_LONG);
+	addr += BIT_WORD(nr);
 	_atomic_spin_lock_irqsave(addr, flags);
 	old = *addr;
 	set = (old & mask) ? 1 : 0;
@@ -104,11 +89,11 @@ static __inline__ int test_and_clear_bit(int nr, volatile unsigned long * addr)
 
 static __inline__ int test_and_change_bit(int nr, volatile unsigned long * addr)
 {
-	unsigned long mask = 1UL << CHOP_SHIFTCOUNT(nr);
+	unsigned long mask = BIT_MASK(nr);
 	unsigned long oldbit;
 	unsigned long flags;
 
-	addr += (nr >> SHIFT_PER_LONG);
+	addr += BIT_WORD(nr);
 	_atomic_spin_lock_irqsave(addr, flags);
 	oldbit = *addr;
 	*addr = oldbit ^ mask;
diff --git a/arch/parisc/include/asm/cmpxchg.h b/arch/parisc/include/asm/cmpxchg.h
index ab5c215cf46c..068958575871 100644
--- a/arch/parisc/include/asm/cmpxchg.h
+++ b/arch/parisc/include/asm/cmpxchg.h
@@ -60,6 +60,7 @@ extern void __cmpxchg_called_with_bad_pointer(void);
 extern unsigned long __cmpxchg_u32(volatile unsigned int *m, unsigned int old,
 				   unsigned int new_);
 extern u64 __cmpxchg_u64(volatile u64 *ptr, u64 old, u64 new_);
+extern u8 __cmpxchg_u8(volatile u8 *ptr, u8 old, u8 new_);
 
 /* don't worry...optimizer will get rid of most of this */
 static inline unsigned long
@@ -71,6 +72,7 @@ __cmpxchg(volatile void *ptr, unsigned long old, unsigned long new_, int size)
 #endif
 	case 4: return __cmpxchg_u32((unsigned int *)ptr,
 				     (unsigned int)old, (unsigned int)new_);
+	case 1: return __cmpxchg_u8((u8 *)ptr, (u8)old, (u8)new_);
 	}
 	__cmpxchg_called_with_bad_pointer();
 	return old;
diff --git a/arch/parisc/include/asm/elf.h b/arch/parisc/include/asm/elf.h
index d00973aab7f1..301af07a04d4 100644
--- a/arch/parisc/include/asm/elf.h
+++ b/arch/parisc/include/asm/elf.h
@@ -152,7 +152,7 @@
 /* The following are PA function descriptors 
  *
  * addr:	the absolute address of the function
- * gp:		either the data pointer (r27) for non-PIC code or the
+ * gp:		either the data pointer (r27) for non-PIC code or
  *		the PLT pointer (r19) for PIC code */
 
 /* Format for the Elf32 Function descriptor */
diff --git a/arch/parisc/include/asm/spinlock.h b/arch/parisc/include/asm/spinlock.h
index 70fecb8dc4e2..51b6c47f802f 100644
--- a/arch/parisc/include/asm/spinlock.h
+++ b/arch/parisc/include/asm/spinlock.h
@@ -10,34 +10,25 @@
 static inline int arch_spin_is_locked(arch_spinlock_t *x)
 {
 	volatile unsigned int *a = __ldcw_align(x);
-	smp_mb();
 	return *a == 0;
 }
 
-static inline void arch_spin_lock(arch_spinlock_t *x)
-{
-	volatile unsigned int *a;
-
-	a = __ldcw_align(x);
-	while (__ldcw(a) == 0)
-		while (*a == 0)
-			cpu_relax();
-}
+#define arch_spin_lock(lock) arch_spin_lock_flags(lock, 0)
 
 static inline void arch_spin_lock_flags(arch_spinlock_t *x,
 					 unsigned long flags)
 {
 	volatile unsigned int *a;
-	unsigned long flags_dis;
 
 	a = __ldcw_align(x);
-	while (__ldcw(a) == 0) {
-		local_save_flags(flags_dis);
-		local_irq_restore(flags);
+	while (__ldcw(a) == 0)
 		while (*a == 0)
-			cpu_relax();
-		local_irq_restore(flags_dis);
-	}
+			if (flags & PSW_SM_I) {
+				local_irq_enable();
+				cpu_relax();
+				local_irq_disable();
+			} else
+				cpu_relax();
 }
 #define arch_spin_lock_flags arch_spin_lock_flags
 
@@ -46,12 +37,8 @@ static inline void arch_spin_unlock(arch_spinlock_t *x)
 	volatile unsigned int *a;
 
 	a = __ldcw_align(x);
-#ifdef CONFIG_SMP
-	(void) __ldcw(a);
-#else
-	mb();
-#endif
-	*a = 1;
+	/* Release with ordered store. */
+	__asm__ __volatile__("stw,ma %0,0(%1)" : : "r"(1), "r"(a) : "memory");
 }
 
 static inline int arch_spin_trylock(arch_spinlock_t *x)
diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S
index 4b484ec7c7da..519f9056fd00 100644
--- a/arch/parisc/kernel/entry.S
+++ b/arch/parisc/kernel/entry.S
@@ -454,7 +454,6 @@
 	nop
 	LDREG		0(\ptp),\pte
 	bb,<,n		\pte,_PAGE_PRESENT_BIT,3f
-	LDCW		0(\tmp),\tmp1
 	b		\fault
 	stw		\spc,0(\tmp)
 99:	ALTERNATIVE(98b, 99b, ALT_COND_NO_SMP, INSN_NOP)
@@ -464,23 +463,26 @@
 3:
 	.endm
 
-	/* Release pa_tlb_lock lock without reloading lock address. */
-	.macro		tlb_unlock0	spc,tmp,tmp1
+	/* Release pa_tlb_lock lock without reloading lock address.
+	   Note that the values in the register spc are limited to
+	   NR_SPACE_IDS (262144). Thus, the stw instruction always
+	   stores a nonzero value even when register spc is 64 bits.
+	   We use an ordered store to ensure all prior accesses are
+	   performed prior to releasing the lock. */
+	.macro		tlb_unlock0	spc,tmp
 #ifdef CONFIG_SMP
 98:	or,COND(=)	%r0,\spc,%r0
-	LDCW		0(\tmp),\tmp1
-	or,COND(=)	%r0,\spc,%r0
-	stw		\spc,0(\tmp)
+	stw,ma		\spc,0(\tmp)
 99:	ALTERNATIVE(98b, 99b, ALT_COND_NO_SMP, INSN_NOP)
 #endif
 	.endm
 
 	/* Release pa_tlb_lock lock. */
-	.macro		tlb_unlock1	spc,tmp,tmp1
+	.macro		tlb_unlock1	spc,tmp
 #ifdef CONFIG_SMP
 98:	load_pa_tlb_lock \tmp
 99:	ALTERNATIVE(98b, 99b, ALT_COND_NO_SMP, INSN_NOP)
-	tlb_unlock0	\spc,\tmp,\tmp1
+	tlb_unlock0	\spc,\tmp
 #endif
 	.endm
 
@@ -1163,7 +1165,7 @@ dtlb_miss_20w:
 	
 	idtlbt          pte,prot
 
-	tlb_unlock1	spc,t0,t1
+	tlb_unlock1	spc,t0
 	rfir
 	nop
 
@@ -1189,7 +1191,7 @@ nadtlb_miss_20w:
 
 	idtlbt          pte,prot
 
-	tlb_unlock1	spc,t0,t1
+	tlb_unlock1	spc,t0
 	rfir
 	nop
 
@@ -1223,7 +1225,7 @@ dtlb_miss_11:
 
 	mtsp		t1, %sr1	/* Restore sr1 */
 
-	tlb_unlock1	spc,t0,t1
+	tlb_unlock1	spc,t0
 	rfir
 	nop
 
@@ -1256,7 +1258,7 @@ nadtlb_miss_11:
 
 	mtsp		t1, %sr1	/* Restore sr1 */
 
-	tlb_unlock1	spc,t0,t1
+	tlb_unlock1	spc,t0
 	rfir
 	nop
 
@@ -1285,7 +1287,7 @@ dtlb_miss_20:
 
 	idtlbt          pte,prot
 
-	tlb_unlock1	spc,t0,t1
+	tlb_unlock1	spc,t0
 	rfir
 	nop
 
@@ -1313,7 +1315,7 @@ nadtlb_miss_20:
 	
 	idtlbt		pte,prot
 
-	tlb_unlock1	spc,t0,t1
+	tlb_unlock1	spc,t0
 	rfir
 	nop
 
@@ -1420,7 +1422,7 @@ itlb_miss_20w:
 	
 	iitlbt          pte,prot
 
-	tlb_unlock1	spc,t0,t1
+	tlb_unlock1	spc,t0
 	rfir
 	nop
 
@@ -1444,7 +1446,7 @@ naitlb_miss_20w:
 
 	iitlbt          pte,prot
 
-	tlb_unlock1	spc,t0,t1
+	tlb_unlock1	spc,t0
 	rfir
 	nop
 
@@ -1478,7 +1480,7 @@ itlb_miss_11:
 
 	mtsp		t1, %sr1	/* Restore sr1 */
 
-	tlb_unlock1	spc,t0,t1
+	tlb_unlock1	spc,t0
 	rfir
 	nop
 
@@ -1502,7 +1504,7 @@ naitlb_miss_11:
 
 	mtsp		t1, %sr1	/* Restore sr1 */
 
-	tlb_unlock1	spc,t0,t1
+	tlb_unlock1	spc,t0
 	rfir
 	nop
 
@@ -1532,7 +1534,7 @@ itlb_miss_20:
 
 	iitlbt          pte,prot
 
-	tlb_unlock1	spc,t0,t1
+	tlb_unlock1	spc,t0
 	rfir
 	nop
 
@@ -1552,7 +1554,7 @@ naitlb_miss_20:
 
 	iitlbt          pte,prot
 
-	tlb_unlock1	spc,t0,t1
+	tlb_unlock1	spc,t0
 	rfir
 	nop
 
@@ -1582,7 +1584,7 @@ dbit_trap_20w:
 		
 	idtlbt          pte,prot
 
-	tlb_unlock0	spc,t0,t1
+	tlb_unlock0	spc,t0
 	rfir
 	nop
 #else
@@ -1608,7 +1610,7 @@ dbit_trap_11:
 
 	mtsp            t1, %sr1     /* Restore sr1 */
 
-	tlb_unlock0	spc,t0,t1
+	tlb_unlock0	spc,t0
 	rfir
 	nop
 
@@ -1628,7 +1630,7 @@ dbit_trap_20:
 	
 	idtlbt		pte,prot
 
-	tlb_unlock0	spc,t0,t1
+	tlb_unlock0	spc,t0
 	rfir
 	nop
 #endif
diff --git a/arch/parisc/kernel/ftrace.c b/arch/parisc/kernel/ftrace.c
index b836fc61a24f..1df0f67ed667 100644
--- a/arch/parisc/kernel/ftrace.c
+++ b/arch/parisc/kernel/ftrace.c
@@ -172,7 +172,7 @@ int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
 
 	ip = (void *)(rec->ip + 4 - size);
 
-	ret = probe_kernel_read(insn, ip, size);
+	ret = copy_from_kernel_nofault(insn, ip, size);
 	if (ret)
 		return ret;
 
diff --git a/arch/parisc/kernel/kgdb.c b/arch/parisc/kernel/kgdb.c
index 664278db9b97..c4554ac13eac 100644
--- a/arch/parisc/kernel/kgdb.c
+++ b/arch/parisc/kernel/kgdb.c
@@ -154,8 +154,8 @@ void kgdb_arch_set_pc(struct pt_regs *regs, unsigned long ip)
 
 int kgdb_arch_set_breakpoint(struct kgdb_bkpt *bpt)
 {
-	int ret = probe_kernel_read(bpt->saved_instr, (char *)bpt->bpt_addr,
-				BREAK_INSTR_SIZE);
+	int ret = copy_from_kernel_nofault(bpt->saved_instr,
+			(char *)bpt->bpt_addr, BREAK_INSTR_SIZE);
 	if (ret)
 		return ret;
 
diff --git a/arch/parisc/kernel/pdt.c b/arch/parisc/kernel/pdt.c
index 6e8550fefad6..fcc761b0e11b 100644
--- a/arch/parisc/kernel/pdt.c
+++ b/arch/parisc/kernel/pdt.c
@@ -18,6 +18,8 @@
 #include <linux/kthread.h>
 #include <linux/initrd.h>
 #include <linux/pgtable.h>
+#include <linux/swap.h>
+#include <linux/swapops.h>
 
 #include <asm/pdc.h>
 #include <asm/pdcpat.h>
@@ -230,6 +232,7 @@ void __init pdc_pdt_init(void)
 
 		/* mark memory page bad */
 		memblock_reserve(pdt_entry[i] & PAGE_MASK, PAGE_SIZE);
+		num_poisoned_pages_inc();
 	}
 }
 
diff --git a/arch/parisc/kernel/process.c b/arch/parisc/kernel/process.c
index 230a6422b99f..de6299ff1530 100644
--- a/arch/parisc/kernel/process.c
+++ b/arch/parisc/kernel/process.c
@@ -208,7 +208,7 @@ arch_initcall(parisc_idle_init);
  * Copy architecture-specific thread state
  */
 int
-copy_thread_tls(unsigned long clone_flags, unsigned long usp,
+copy_thread(unsigned long clone_flags, unsigned long usp,
 	    unsigned long kthread_arg, struct task_struct *p, unsigned long tls)
 {
 	struct pt_regs *cregs = &(p->thread.regs);
@@ -293,7 +293,7 @@ void *dereference_function_descriptor(void *ptr)
 	Elf64_Fdesc *desc = ptr;
 	void *p;
 
-	if (!probe_kernel_address(&desc->addr, p))
+	if (!get_kernel_nofault(p, (void *)&desc->addr))
 		ptr = p;
 	return ptr;
 }
diff --git a/arch/parisc/kernel/syscall.S b/arch/parisc/kernel/syscall.S
index f05c9d5b6b9e..3ad61a177f5b 100644
--- a/arch/parisc/kernel/syscall.S
+++ b/arch/parisc/kernel/syscall.S
@@ -640,11 +640,7 @@ cas_action:
 	sub,<>	%r28, %r25, %r0
 2:	stw	%r24, 0(%r26)
 	/* Free lock */
-#ifdef CONFIG_SMP
-98:	LDCW	0(%sr2,%r20), %r1			/* Barrier */
-99:	ALTERNATIVE(98b, 99b, ALT_COND_NO_SMP, INSN_NOP)
-#endif
-	stw	%r20, 0(%sr2,%r20)
+	stw,ma	%r20, 0(%sr2,%r20)
 #if ENABLE_LWS_DEBUG
 	/* Clear thread register indicator */
 	stw	%r0, 4(%sr2,%r20)
@@ -658,11 +654,7 @@ cas_action:
 3:		
 	/* Error occurred on load or store */
 	/* Free lock */
-#ifdef CONFIG_SMP
-98:	LDCW	0(%sr2,%r20), %r1			/* Barrier */
-99:	ALTERNATIVE(98b, 99b, ALT_COND_NO_SMP, INSN_NOP)
-#endif
-	stw	%r20, 0(%sr2,%r20)
+	stw,ma	%r20, 0(%sr2,%r20)
 #if ENABLE_LWS_DEBUG
 	stw	%r0, 4(%sr2,%r20)
 #endif
@@ -863,11 +855,7 @@ cas2_action:
 
 cas2_end:
 	/* Free lock */
-#ifdef CONFIG_SMP
-98:	LDCW	0(%sr2,%r20), %r1			/* Barrier */
-99:	ALTERNATIVE(98b, 99b, ALT_COND_NO_SMP, INSN_NOP)
-#endif
-	stw	%r20, 0(%sr2,%r20)
+	stw,ma	%r20, 0(%sr2,%r20)
 	/* Enable interrupts */
 	ssm	PSW_SM_I, %r0
 	/* Return to userspace, set no error */
@@ -877,11 +865,7 @@ cas2_end:
 22:
 	/* Error occurred on load or store */
 	/* Free lock */
-#ifdef CONFIG_SMP
-98:	LDCW	0(%sr2,%r20), %r1			/* Barrier */
-99:	ALTERNATIVE(98b, 99b, ALT_COND_NO_SMP, INSN_NOP)
-#endif
-	stw	%r20, 0(%sr2,%r20)
+	stw,ma	%r20, 0(%sr2,%r20)
 	ssm	PSW_SM_I, %r0
 	ldo	1(%r0),%r28
 	b	lws_exit
diff --git a/arch/parisc/kernel/syscalls/syscall.tbl b/arch/parisc/kernel/syscalls/syscall.tbl
index 5a758fa6ec52..5d76b8f15197 100644
--- a/arch/parisc/kernel/syscalls/syscall.tbl
+++ b/arch/parisc/kernel/syscalls/syscall.tbl
@@ -433,6 +433,7 @@
 433	common	fspick				sys_fspick
 434	common	pidfd_open			sys_pidfd_open
 435	common	clone3				sys_clone3_wrapper
+436	common	close_range			sys_close_range
 437	common	openat2				sys_openat2
 438	common	pidfd_getfd			sys_pidfd_getfd
 439	common	faccessat2			sys_faccessat2
diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c
index 5400e23a77a1..43875c289723 100644
--- a/arch/parisc/kernel/traps.c
+++ b/arch/parisc/kernel/traps.c
@@ -75,7 +75,7 @@ static int printbinary(char *buf, unsigned long x, int nbits)
 		lvl, f, (x), (x+3), (r)[(x)+0], (r)[(x)+1],		\
 		(r)[(x)+2], (r)[(x)+3])
 
-static void print_gr(char *level, struct pt_regs *regs)
+static void print_gr(const char *level, struct pt_regs *regs)
 {
 	int i;
 	char buf[64];
@@ -89,7 +89,7 @@ static void print_gr(char *level, struct pt_regs *regs)
 		PRINTREGS(level, regs->gr, "r", RFMT, i);
 }
 
-static void print_fr(char *level, struct pt_regs *regs)
+static void print_fr(const char *level, struct pt_regs *regs)
 {
 	int i;
 	char buf[64];
@@ -119,7 +119,7 @@ static void print_fr(char *level, struct pt_regs *regs)
 void show_regs(struct pt_regs *regs)
 {
 	int i, user;
-	char *level;
+	const char *level;
 	unsigned long cr30, cr31;
 
 	user = user_mode(regs);
diff --git a/arch/parisc/lib/bitops.c b/arch/parisc/lib/bitops.c
index 70ffbcf889b8..2e4d1f05a926 100644
--- a/arch/parisc/lib/bitops.c
+++ b/arch/parisc/lib/bitops.c
@@ -79,3 +79,15 @@ unsigned long __cmpxchg_u32(volatile unsigned int *ptr, unsigned int old, unsign
 	_atomic_spin_unlock_irqrestore(ptr, flags);
 	return (unsigned long)prev;
 }
+
+u8 __cmpxchg_u8(volatile u8 *ptr, u8 old, u8 new)
+{
+	unsigned long flags;
+	u8 prev;
+
+	_atomic_spin_lock_irqsave(ptr, flags);
+	if ((prev = *ptr) == old)
+		*ptr = new;
+	_atomic_spin_unlock_irqrestore(ptr, flags);
+	return prev;
+}
diff --git a/arch/parisc/lib/memcpy.c b/arch/parisc/lib/memcpy.c
index 94a9fe2702c2..4b75388190b4 100644
--- a/arch/parisc/lib/memcpy.c
+++ b/arch/parisc/lib/memcpy.c
@@ -57,7 +57,7 @@ void * memcpy(void * dst,const void *src, size_t count)
 EXPORT_SYMBOL(raw_copy_in_user);
 EXPORT_SYMBOL(memcpy);
 
-bool probe_kernel_read_allowed(const void *unsafe_src, size_t size)
+bool copy_from_kernel_nofault_allowed(const void *unsafe_src, size_t size)
 {
 	if ((unsigned long)unsafe_src < PAGE_SIZE)
 		return false;
diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c
index 48d628a1a0af..39ea464c8bd9 100644
--- a/arch/parisc/mm/init.c
+++ b/arch/parisc/mm/init.c
@@ -750,7 +750,7 @@ unsigned long alloc_sid(void)
 	free_space_ids--;
 
 	index = find_next_zero_bit(space_id, NR_SPACE_IDS, space_id_index);
-	space_id[index >> SHIFT_PER_LONG] |= (1L << (index & (BITS_PER_LONG - 1)));
+	space_id[BIT_WORD(index)] |= BIT_MASK(index);
 	space_id_index = index;
 
 	spin_unlock(&sid_lock);
@@ -761,16 +761,16 @@ unsigned long alloc_sid(void)
 void free_sid(unsigned long spaceid)
 {
 	unsigned long index = spaceid >> SPACEID_SHIFT;
-	unsigned long *dirty_space_offset;
+	unsigned long *dirty_space_offset, mask;
 
-	dirty_space_offset = dirty_space_id + (index >> SHIFT_PER_LONG);
-	index &= (BITS_PER_LONG - 1);
+	dirty_space_offset = &dirty_space_id[BIT_WORD(index)];
+	mask = BIT_MASK(index);
 
 	spin_lock(&sid_lock);
 
-	BUG_ON(*dirty_space_offset & (1L << index)); /* attempt to free space id twice */
+	BUG_ON(*dirty_space_offset & mask); /* attempt to free space id twice */
 
-	*dirty_space_offset |= (1L << index);
+	*dirty_space_offset |= mask;
 	dirty_space_ids++;
 
 	spin_unlock(&sid_lock);
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 9fa23eb320ff..29a057908173 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -151,6 +151,8 @@ config PPC
 	select BUILDTIME_TABLE_SORT
 	select CLONE_BACKWARDS
 	select DCACHE_WORD_ACCESS		if PPC64 && CPU_LITTLE_ENDIAN
+	select DMA_OPS				if PPC64
+	select DMA_OPS_BYPASS			if PPC64
 	select DYNAMIC_FTRACE			if FUNCTION_TRACER
 	select EDAC_ATOMIC_SCRUB
 	select EDAC_SUPPORT
@@ -186,7 +188,6 @@ config PPC
 	select HAVE_STACKPROTECTOR		if PPC32 && $(cc-option,-mstack-protector-guard=tls -mstack-protector-guard-reg=r2)
 	select HAVE_CONTEXT_TRACKING		if PPC64
 	select HAVE_TIF_NOHZ			if PPC64
-	select HAVE_COPY_THREAD_TLS
 	select HAVE_DEBUG_KMEMLEAK
 	select HAVE_DEBUG_STACKOVERFLOW
 	select HAVE_DYNAMIC_FTRACE
diff --git a/arch/powerpc/include/asm/atomic.h b/arch/powerpc/include/asm/atomic.h
index 498785ffc25f..0311c3c42960 100644
--- a/arch/powerpc/include/asm/atomic.h
+++ b/arch/powerpc/include/asm/atomic.h
@@ -11,8 +11,6 @@
 #include <asm/cmpxchg.h>
 #include <asm/barrier.h>
 
-#define ATOMIC_INIT(i)		{ (i) }
-
 /*
  * Since *_return_relaxed and {cmp}xchg_relaxed are implemented with
  * a "bne-" instruction at the end, so an isync is enough as a acquire barrier
diff --git a/arch/powerpc/include/asm/device.h b/arch/powerpc/include/asm/device.h
index 266542769e4b..452402215e12 100644
--- a/arch/powerpc/include/asm/device.h
+++ b/arch/powerpc/include/asm/device.h
@@ -19,11 +19,6 @@ struct iommu_table;
  */
 struct dev_archdata {
 	/*
-	 * Set to %true if the dma_iommu_ops are requested to use a direct
-	 * window instead of dynamically mapping memory.
-	 */
-	bool			iommu_bypass : 1;
-	/*
 	 * These two used to be a union. However, with the hybrid ops we need
 	 * both so here we store both a DMA offset for direct mappings and
 	 * an iommu_table for remapped DMA.
diff --git a/arch/powerpc/include/asm/dtl.h b/arch/powerpc/include/asm/dtl.h
new file mode 100644
index 000000000000..1625888f27ef
--- /dev/null
+++ b/arch/powerpc/include/asm/dtl.h
@@ -0,0 +1,52 @@
+#ifndef _ASM_POWERPC_DTL_H
+#define _ASM_POWERPC_DTL_H
+
+#include <asm/lppaca.h>
+#include <linux/spinlock_types.h>
+
+/*
+ * Layout of entries in the hypervisor's dispatch trace log buffer.
+ */
+struct dtl_entry {
+	u8	dispatch_reason;
+	u8	preempt_reason;
+	__be16	processor_id;
+	__be32	enqueue_to_dispatch_time;
+	__be32	ready_to_enqueue_time;
+	__be32	waiting_to_ready_time;
+	__be64	timebase;
+	__be64	fault_addr;
+	__be64	srr0;
+	__be64	srr1;
+};
+
+#define DISPATCH_LOG_BYTES	4096	/* bytes per cpu */
+#define N_DISPATCH_LOG		(DISPATCH_LOG_BYTES / sizeof(struct dtl_entry))
+
+/*
+ * Dispatch trace log event enable mask:
+ *   0x1: voluntary virtual processor waits
+ *   0x2: time-slice preempts
+ *   0x4: virtual partition memory page faults
+ */
+#define DTL_LOG_CEDE		0x1
+#define DTL_LOG_PREEMPT		0x2
+#define DTL_LOG_FAULT		0x4
+#define DTL_LOG_ALL		(DTL_LOG_CEDE | DTL_LOG_PREEMPT | DTL_LOG_FAULT)
+
+extern struct kmem_cache *dtl_cache;
+extern rwlock_t dtl_access_lock;
+
+/*
+ * When CONFIG_VIRT_CPU_ACCOUNTING_NATIVE = y, the cpu accounting code controls
+ * reading from the dispatch trace log.  If other code wants to consume
+ * DTL entries, it can set this pointer to a function that will get
+ * called once for each DTL entry that gets processed.
+ */
+extern void (*dtl_consumer)(struct dtl_entry *entry, u64 index);
+
+extern void register_dtl_buffer(int cpu);
+extern void alloc_dtl_buffers(unsigned long *time_limit);
+extern long hcall_vphn(unsigned long cpu, u64 flags, __be32 *associativity);
+
+#endif /* _ASM_POWERPC_DTL_H */
diff --git a/arch/powerpc/include/asm/icswx.h b/arch/powerpc/include/asm/icswx.h
index 965b1f39b2a5..b0c70a35fd0e 100644
--- a/arch/powerpc/include/asm/icswx.h
+++ b/arch/powerpc/include/asm/icswx.h
@@ -77,6 +77,8 @@ struct coprocessor_completion_block {
 #define CSB_CC_CHAIN		(37)
 #define CSB_CC_SEQUENCE		(38)
 #define CSB_CC_HW		(39)
+/* P9 DD2 NX Workbook 3.2 (Table 4-36): Address translation fault */
+#define	CSB_CC_FAULT_ADDRESS	(250)
 
 #define CSB_SIZE		(0x10)
 #define CSB_ALIGN		CSB_SIZE
diff --git a/arch/powerpc/include/asm/lppaca.h b/arch/powerpc/include/asm/lppaca.h
index 3b4b305796ae..c390ec377bae 100644
--- a/arch/powerpc/include/asm/lppaca.h
+++ b/arch/powerpc/include/asm/lppaca.h
@@ -42,7 +42,6 @@
  */
 #include <linux/cache.h>
 #include <linux/threads.h>
-#include <linux/spinlock_types.h>
 #include <asm/types.h>
 #include <asm/mmu.h>
 #include <asm/firmware.h>
@@ -146,49 +145,6 @@ struct slb_shadow {
 	} save_area[SLB_NUM_BOLTED];
 } ____cacheline_aligned;
 
-/*
- * Layout of entries in the hypervisor's dispatch trace log buffer.
- */
-struct dtl_entry {
-	u8	dispatch_reason;
-	u8	preempt_reason;
-	__be16	processor_id;
-	__be32	enqueue_to_dispatch_time;
-	__be32	ready_to_enqueue_time;
-	__be32	waiting_to_ready_time;
-	__be64	timebase;
-	__be64	fault_addr;
-	__be64	srr0;
-	__be64	srr1;
-};
-
-#define DISPATCH_LOG_BYTES	4096	/* bytes per cpu */
-#define N_DISPATCH_LOG		(DISPATCH_LOG_BYTES / sizeof(struct dtl_entry))
-
-/*
- * Dispatch trace log event enable mask:
- *   0x1: voluntary virtual processor waits
- *   0x2: time-slice preempts
- *   0x4: virtual partition memory page faults
- */
-#define DTL_LOG_CEDE		0x1
-#define DTL_LOG_PREEMPT		0x2
-#define DTL_LOG_FAULT		0x4
-#define DTL_LOG_ALL		(DTL_LOG_CEDE | DTL_LOG_PREEMPT | DTL_LOG_FAULT)
-
-extern struct kmem_cache *dtl_cache;
-extern rwlock_t dtl_access_lock;
-
-/*
- * When CONFIG_VIRT_CPU_ACCOUNTING_NATIVE = y, the cpu accounting code controls
- * reading from the dispatch trace log.  If other code wants to consume
- * DTL entries, it can set this pointer to a function that will get
- * called once for each DTL entry that gets processed.
- */
-extern void (*dtl_consumer)(struct dtl_entry *entry, u64 index);
-
-extern void register_dtl_buffer(int cpu);
-extern void alloc_dtl_buffers(unsigned long *time_limit);
 extern long hcall_vphn(unsigned long cpu, u64 flags, __be32 *associativity);
 
 #endif /* CONFIG_PPC_BOOK3S */
diff --git a/arch/powerpc/include/asm/nohash/32/pgtable.h b/arch/powerpc/include/asm/nohash/32/pgtable.h
index b56f14160ae5..b0afbdd07740 100644
--- a/arch/powerpc/include/asm/nohash/32/pgtable.h
+++ b/arch/powerpc/include/asm/nohash/32/pgtable.h
@@ -205,10 +205,6 @@ static inline void pmd_clear(pmd_t *pmdp)
 	*pmdp = __pmd(0);
 }
 
-/* to find an entry in a page-table-directory */
-#define pgd_index(address)	 ((address) >> PGDIR_SHIFT)
-#define pgd_offset(mm, address)	 ((mm)->pgd + pgd_index(address))
-
 /*
  * PTE updates. This function is called whenever an existing
  * valid PTE is updated. This does -not- include set_pte_at()
@@ -230,6 +226,8 @@ static inline void pmd_clear(pmd_t *pmdp)
  * For other page sizes, we have a single entry in the table.
  */
 #ifdef CONFIG_PPC_8xx
+static pmd_t *pmd_off(struct mm_struct *mm, unsigned long addr);
+
 static inline pte_basic_t pte_update(struct mm_struct *mm, unsigned long addr, pte_t *p,
 				     unsigned long clr, unsigned long set, int huge)
 {
@@ -237,7 +235,7 @@ static inline pte_basic_t pte_update(struct mm_struct *mm, unsigned long addr, p
 	pte_basic_t old = pte_val(*p);
 	pte_basic_t new = (old & ~(pte_basic_t)clr) | set;
 	int num, i;
-	pmd_t *pmd = pmd_offset(pud_offset(p4d_offset(pgd_offset(mm, addr), addr), addr), addr);
+	pmd_t *pmd = pmd_off(mm, addr);
 
 	if (!huge)
 		num = PAGE_SIZE / SZ_4K;
@@ -286,6 +284,16 @@ static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
 	return __pte(pte_update(mm, addr, ptep, ~0, 0, 0));
 }
 
+#if defined(CONFIG_PPC_8xx) && defined(CONFIG_PPC_16K_PAGES)
+#define __HAVE_ARCH_PTEP_GET
+static inline pte_t ptep_get(pte_t *ptep)
+{
+	pte_t pte = {READ_ONCE(ptep->pte), 0, 0, 0};
+
+	return pte;
+}
+#endif
+
 #define __HAVE_ARCH_PTEP_SET_WRPROTECT
 static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr,
 				      pte_t *ptep)
diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h
index 45a839a7c6cf..84b2564cf5a4 100644
--- a/arch/powerpc/include/asm/paca.h
+++ b/arch/powerpc/include/asm/paca.h
@@ -29,7 +29,6 @@
 #include <asm/hmi.h>
 #include <asm/cpuidle.h>
 #include <asm/atomic.h>
-#include <asm/rtas-types.h>
 
 #include <asm-generic/mmiowb_types.h>
 
@@ -53,6 +52,7 @@ extern unsigned int debug_smp_processor_id(void); /* from linux/smp.h */
 #define get_slb_shadow()	(get_paca()->slb_shadow_ptr)
 
 struct task_struct;
+struct rtas_args;
 
 /*
  * Defines the layout of the paca.
diff --git a/arch/powerpc/include/asm/sections.h b/arch/powerpc/include/asm/sections.h
index d19871763ed4..324d7b298ec3 100644
--- a/arch/powerpc/include/asm/sections.h
+++ b/arch/powerpc/include/asm/sections.h
@@ -85,7 +85,7 @@ static inline void *dereference_function_descriptor(void *ptr)
 	struct ppc64_opd_entry *desc = ptr;
 	void *p;
 
-	if (!probe_kernel_address(&desc->funcaddr, p))
+	if (!get_kernel_nofault(p, (void *)&desc->funcaddr))
 		ptr = p;
 	return ptr;
 }
diff --git a/arch/powerpc/include/uapi/asm/papr_pdsm.h b/arch/powerpc/include/uapi/asm/papr_pdsm.h
new file mode 100644
index 000000000000..9ccecc1d6840
--- /dev/null
+++ b/arch/powerpc/include/uapi/asm/papr_pdsm.h
@@ -0,0 +1,132 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * PAPR nvDimm Specific Methods (PDSM) and structs for libndctl
+ *
+ * (C) Copyright IBM 2020
+ *
+ * Author: Vaibhav Jain <vaibhav at linux.ibm.com>
+ */
+
+#ifndef _UAPI_ASM_POWERPC_PAPR_PDSM_H_
+#define _UAPI_ASM_POWERPC_PAPR_PDSM_H_
+
+#include <linux/types.h>
+#include <linux/ndctl.h>
+
+/*
+ * PDSM Envelope:
+ *
+ * The ioctl ND_CMD_CALL exchange data between user-space and kernel via
+ * envelope which consists of 2 headers sections and payload sections as
+ * illustrated below:
+ *  +-----------------+---------------+---------------------------+
+ *  |   64-Bytes      |   8-Bytes     |       Max 184-Bytes       |
+ *  +-----------------+---------------+---------------------------+
+ *  | ND-HEADER       |  PDSM-HEADER  |      PDSM-PAYLOAD         |
+ *  +-----------------+---------------+---------------------------+
+ *  | nd_family       |               |                           |
+ *  | nd_size_out     | cmd_status    |                           |
+ *  | nd_size_in      | reserved      |     nd_pdsm_payload       |
+ *  | nd_command      | payload   --> |                           |
+ *  | nd_fw_size      |               |                           |
+ *  | nd_payload ---> |               |                           |
+ *  +---------------+-----------------+---------------------------+
+ *
+ * ND Header:
+ * This is the generic libnvdimm header described as 'struct nd_cmd_pkg'
+ * which is interpreted by libnvdimm before passed on to papr_scm. Important
+ * member fields used are:
+ * 'nd_family'		: (In) NVDIMM_FAMILY_PAPR_SCM
+ * 'nd_size_in'		: (In) PDSM-HEADER + PDSM-IN-PAYLOAD (usually 0)
+ * 'nd_size_out'        : (In) PDSM-HEADER + PDSM-RETURN-PAYLOAD
+ * 'nd_command'         : (In) One of PAPR_PDSM_XXX
+ * 'nd_fw_size'         : (Out) PDSM-HEADER + size of actual payload returned
+ *
+ * PDSM Header:
+ * This is papr-scm specific header that precedes the payload. This is defined
+ * as nd_cmd_pdsm_pkg.  Following fields aare available in this header:
+ *
+ * 'cmd_status'		: (Out) Errors if any encountered while servicing PDSM.
+ * 'reserved'		: Not used, reserved for future and should be set to 0.
+ * 'payload'            : A union of all the possible payload structs
+ *
+ * PDSM Payload:
+ *
+ * The layout of the PDSM Payload is defined by various structs shared between
+ * papr_scm and libndctl so that contents of payload can be interpreted. As such
+ * its defined as a union of all possible payload structs as
+ * 'union nd_pdsm_payload'. Based on the value of 'nd_cmd_pkg.nd_command'
+ * appropriate member of the union is accessed.
+ */
+
+/* Max payload size that we can handle */
+#define ND_PDSM_PAYLOAD_MAX_SIZE 184
+
+/* Max payload size that we can handle */
+#define ND_PDSM_HDR_SIZE \
+	(sizeof(struct nd_pkg_pdsm) - ND_PDSM_PAYLOAD_MAX_SIZE)
+
+/* Various nvdimm health indicators */
+#define PAPR_PDSM_DIMM_HEALTHY       0
+#define PAPR_PDSM_DIMM_UNHEALTHY     1
+#define PAPR_PDSM_DIMM_CRITICAL      2
+#define PAPR_PDSM_DIMM_FATAL         3
+
+/*
+ * Struct exchanged between kernel & ndctl in for PAPR_PDSM_HEALTH
+ * Various flags indicate the health status of the dimm.
+ *
+ * extension_flags	: Any extension fields present in the struct.
+ * dimm_unarmed		: Dimm not armed. So contents wont persist.
+ * dimm_bad_shutdown	: Previous shutdown did not persist contents.
+ * dimm_bad_restore	: Contents from previous shutdown werent restored.
+ * dimm_scrubbed	: Contents of the dimm have been scrubbed.
+ * dimm_locked		: Contents of the dimm cant be modified until CEC reboot
+ * dimm_encrypted	: Contents of dimm are encrypted.
+ * dimm_health		: Dimm health indicator. One of PAPR_PDSM_DIMM_XXXX
+ */
+struct nd_papr_pdsm_health {
+	union {
+		struct {
+			__u32 extension_flags;
+			__u8 dimm_unarmed;
+			__u8 dimm_bad_shutdown;
+			__u8 dimm_bad_restore;
+			__u8 dimm_scrubbed;
+			__u8 dimm_locked;
+			__u8 dimm_encrypted;
+			__u16 dimm_health;
+		};
+		__u8 buf[ND_PDSM_PAYLOAD_MAX_SIZE];
+	};
+};
+
+/*
+ * Methods to be embedded in ND_CMD_CALL request. These are sent to the kernel
+ * via 'nd_cmd_pkg.nd_command' member of the ioctl struct
+ */
+enum papr_pdsm {
+	PAPR_PDSM_MIN = 0x0,
+	PAPR_PDSM_HEALTH,
+	PAPR_PDSM_MAX,
+};
+
+/* Maximal union that can hold all possible payload types */
+union nd_pdsm_payload {
+	struct nd_papr_pdsm_health health;
+	__u8 buf[ND_PDSM_PAYLOAD_MAX_SIZE];
+} __packed;
+
+/*
+ * PDSM-header + payload expected with ND_CMD_CALL ioctl from libnvdimm
+ * Valid member of union 'payload' is identified via 'nd_cmd_pkg.nd_command'
+ * that should always precede this struct when sent to papr_scm via CMD_CALL
+ * interface.
+ */
+struct nd_pkg_pdsm {
+	__s32 cmd_status;	/* Out: Sub-cmd status returned back */
+	__u16 reserved[2];	/* Ignored and to be set as '0' */
+	union nd_pdsm_payload payload;
+} __packed;
+
+#endif /* _UAPI_ASM_POWERPC_PAPR_PDSM_H_ */
diff --git a/arch/powerpc/kernel/dma-iommu.c b/arch/powerpc/kernel/dma-iommu.c
index e486d1d78de2..569fecd7b5b2 100644
--- a/arch/powerpc/kernel/dma-iommu.c
+++ b/arch/powerpc/kernel/dma-iommu.c
@@ -14,23 +14,6 @@
  * Generic iommu implementation
  */
 
-/*
- * The coherent mask may be smaller than the real mask, check if we can
- * really use a direct window.
- */
-static inline bool dma_iommu_alloc_bypass(struct device *dev)
-{
-	return dev->archdata.iommu_bypass && !iommu_fixed_is_weak &&
-		dma_direct_supported(dev, dev->coherent_dma_mask);
-}
-
-static inline bool dma_iommu_map_bypass(struct device *dev,
-		unsigned long attrs)
-{
-	return dev->archdata.iommu_bypass &&
-		(!iommu_fixed_is_weak || (attrs & DMA_ATTR_WEAK_ORDERING));
-}
-
 /* Allocates a contiguous real buffer and creates mappings over it.
  * Returns the virtual address of the buffer and sets dma_handle
  * to the dma address (mapping) of the first page.
@@ -39,8 +22,6 @@ static void *dma_iommu_alloc_coherent(struct device *dev, size_t size,
 				      dma_addr_t *dma_handle, gfp_t flag,
 				      unsigned long attrs)
 {
-	if (dma_iommu_alloc_bypass(dev))
-		return dma_direct_alloc(dev, size, dma_handle, flag, attrs);
 	return iommu_alloc_coherent(dev, get_iommu_table_base(dev), size,
 				    dma_handle, dev->coherent_dma_mask, flag,
 				    dev_to_node(dev));
@@ -50,11 +31,7 @@ static void dma_iommu_free_coherent(struct device *dev, size_t size,
 				    void *vaddr, dma_addr_t dma_handle,
 				    unsigned long attrs)
 {
-	if (dma_iommu_alloc_bypass(dev))
-		dma_direct_free(dev, size, vaddr, dma_handle, attrs);
-	else
-		iommu_free_coherent(get_iommu_table_base(dev), size, vaddr,
-				dma_handle);
+	iommu_free_coherent(get_iommu_table_base(dev), size, vaddr, dma_handle);
 }
 
 /* Creates TCEs for a user provided buffer.  The user buffer must be
@@ -67,9 +44,6 @@ static dma_addr_t dma_iommu_map_page(struct device *dev, struct page *page,
 				     enum dma_data_direction direction,
 				     unsigned long attrs)
 {
-	if (dma_iommu_map_bypass(dev, attrs))
-		return dma_direct_map_page(dev, page, offset, size, direction,
-				attrs);
 	return iommu_map_page(dev, get_iommu_table_base(dev), page, offset,
 			      size, dma_get_mask(dev), direction, attrs);
 }
@@ -79,11 +53,8 @@ static void dma_iommu_unmap_page(struct device *dev, dma_addr_t dma_handle,
 				 size_t size, enum dma_data_direction direction,
 				 unsigned long attrs)
 {
-	if (!dma_iommu_map_bypass(dev, attrs))
-		iommu_unmap_page(get_iommu_table_base(dev), dma_handle, size,
-				direction,  attrs);
-	else
-		dma_direct_unmap_page(dev, dma_handle, size, direction, attrs);
+	iommu_unmap_page(get_iommu_table_base(dev), dma_handle, size, direction,
+			 attrs);
 }
 
 
@@ -91,8 +62,6 @@ static int dma_iommu_map_sg(struct device *dev, struct scatterlist *sglist,
 			    int nelems, enum dma_data_direction direction,
 			    unsigned long attrs)
 {
-	if (dma_iommu_map_bypass(dev, attrs))
-		return dma_direct_map_sg(dev, sglist, nelems, direction, attrs);
 	return ppc_iommu_map_sg(dev, get_iommu_table_base(dev), sglist, nelems,
 				dma_get_mask(dev), direction, attrs);
 }
@@ -101,11 +70,8 @@ static void dma_iommu_unmap_sg(struct device *dev, struct scatterlist *sglist,
 		int nelems, enum dma_data_direction direction,
 		unsigned long attrs)
 {
-	if (!dma_iommu_map_bypass(dev, attrs))
-		ppc_iommu_unmap_sg(get_iommu_table_base(dev), sglist, nelems,
+	ppc_iommu_unmap_sg(get_iommu_table_base(dev), sglist, nelems,
 			   direction, attrs);
-	else
-		dma_direct_unmap_sg(dev, sglist, nelems, direction, attrs);
 }
 
 static bool dma_iommu_bypass_supported(struct device *dev, u64 mask)
@@ -113,8 +79,9 @@ static bool dma_iommu_bypass_supported(struct device *dev, u64 mask)
 	struct pci_dev *pdev = to_pci_dev(dev);
 	struct pci_controller *phb = pci_bus_to_host(pdev->bus);
 
-	return phb->controller_ops.iommu_bypass_supported &&
-		phb->controller_ops.iommu_bypass_supported(pdev, mask);
+	if (iommu_fixed_is_weak || !phb->controller_ops.iommu_bypass_supported)
+		return false;
+	return phb->controller_ops.iommu_bypass_supported(pdev, mask);
 }
 
 /* We support DMA to/from any memory page via the iommu */
@@ -123,7 +90,7 @@ int dma_iommu_dma_supported(struct device *dev, u64 mask)
 	struct iommu_table *tbl = get_iommu_table_base(dev);
 
 	if (dev_is_pci(dev) && dma_iommu_bypass_supported(dev, mask)) {
-		dev->archdata.iommu_bypass = true;
+		dev->dma_ops_bypass = true;
 		dev_dbg(dev, "iommu: 64-bit OK, using fixed ops\n");
 		return 1;
 	}
@@ -141,7 +108,7 @@ int dma_iommu_dma_supported(struct device *dev, u64 mask)
 	}
 
 	dev_dbg(dev, "iommu: not 64-bit, using default ops\n");
-	dev->archdata.iommu_bypass = false;
+	dev->dma_ops_bypass = false;
 	return 1;
 }
 
@@ -153,47 +120,12 @@ u64 dma_iommu_get_required_mask(struct device *dev)
 	if (!tbl)
 		return 0;
 
-	if (dev_is_pci(dev)) {
-		u64 bypass_mask = dma_direct_get_required_mask(dev);
-
-		if (dma_iommu_bypass_supported(dev, bypass_mask))
-			return bypass_mask;
-	}
-
 	mask = 1ULL < (fls_long(tbl->it_offset + tbl->it_size) - 1);
 	mask += mask - 1;
 
 	return mask;
 }
 
-static void dma_iommu_sync_for_cpu(struct device *dev, dma_addr_t addr,
-		size_t size, enum dma_data_direction dir)
-{
-	if (dma_iommu_alloc_bypass(dev))
-		dma_direct_sync_single_for_cpu(dev, addr, size, dir);
-}
-
-static void dma_iommu_sync_for_device(struct device *dev, dma_addr_t addr,
-		size_t sz, enum dma_data_direction dir)
-{
-	if (dma_iommu_alloc_bypass(dev))
-		dma_direct_sync_single_for_device(dev, addr, sz, dir);
-}
-
-extern void dma_iommu_sync_sg_for_cpu(struct device *dev,
-		struct scatterlist *sgl, int nents, enum dma_data_direction dir)
-{
-	if (dma_iommu_alloc_bypass(dev))
-		dma_direct_sync_sg_for_cpu(dev, sgl, nents, dir);
-}
-
-extern void dma_iommu_sync_sg_for_device(struct device *dev,
-		struct scatterlist *sgl, int nents, enum dma_data_direction dir)
-{
-	if (dma_iommu_alloc_bypass(dev))
-		dma_direct_sync_sg_for_device(dev, sgl, nents, dir);
-}
-
 const struct dma_map_ops dma_iommu_ops = {
 	.alloc			= dma_iommu_alloc_coherent,
 	.free			= dma_iommu_free_coherent,
@@ -203,10 +135,6 @@ const struct dma_map_ops dma_iommu_ops = {
 	.map_page		= dma_iommu_map_page,
 	.unmap_page		= dma_iommu_unmap_page,
 	.get_required_mask	= dma_iommu_get_required_mask,
-	.sync_single_for_cpu	= dma_iommu_sync_for_cpu,
-	.sync_single_for_device	= dma_iommu_sync_for_device,
-	.sync_sg_for_cpu	= dma_iommu_sync_sg_for_cpu,
-	.sync_sg_for_device	= dma_iommu_sync_sg_for_device,
 	.mmap			= dma_common_mmap,
 	.get_sgtable		= dma_common_get_sgtable,
 };
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index e70ebb5c318c..446e54c3f71e 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -270,7 +270,7 @@ BEGIN_FTR_SECTION
 END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
 	.endif
 
-	ld	r10,PACA_EXGEN+EX_CTR(r13)
+	ld	r10,IAREA+EX_CTR(r13)
 	mtctr	r10
 BEGIN_FTR_SECTION
 	ld	r10,IAREA+EX_PPR(r13)
@@ -298,7 +298,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
 
 	.if IKVM_SKIP
 89:	mtocrf	0x80,r9
-	ld	r10,PACA_EXGEN+EX_CTR(r13)
+	ld	r10,IAREA+EX_CTR(r13)
 	mtctr	r10
 	ld	r9,IAREA+EX_R9(r13)
 	ld	r10,IAREA+EX_R10(r13)
@@ -2551,7 +2551,7 @@ EXC_VIRT_NONE(0x5400, 0x100)
 INT_DEFINE_BEGIN(denorm_exception)
 	IVEC=0x1500
 	IHSRR=1
-	IBRANCH_COMMON=0
+	IBRANCH_TO_COMMON=0
 	IKVM_REAL=1
 INT_DEFINE_END(denorm_exception)
 
@@ -3072,10 +3072,18 @@ do_hash_page:
 	ori	r0,r0,DSISR_BAD_FAULT_64S@l
 	and.	r0,r5,r0		/* weird error? */
 	bne-	handle_page_fault	/* if not, try to insert a HPTE */
+
+	/*
+	 * If we are in an "NMI" (e.g., an interrupt when soft-disabled), then
+	 * don't call hash_page, just fail the fault. This is required to
+	 * prevent re-entrancy problems in the hash code, namely perf
+	 * interrupts hitting while something holds H_PAGE_BUSY, and taking a
+	 * hash fault. See the comment in hash_preload().
+	 */
 	ld	r11, PACA_THREAD_INFO(r13)
-	lwz	r0,TI_PREEMPT(r11)	/* If we're in an "NMI" */
-	andis.	r0,r0,NMI_MASK@h	/* (i.e. an irq when soft-disabled) */
-	bne	77f			/* then don't call hash_page now */
+	lwz	r0,TI_PREEMPT(r11)
+	andis.	r0,r0,NMI_MASK@h
+	bne	77f
 
 	/*
 	 * r3 contains the trap number
diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c
index 652b2852bea3..409080208a6c 100644
--- a/arch/powerpc/kernel/kgdb.c
+++ b/arch/powerpc/kernel/kgdb.c
@@ -421,7 +421,7 @@ int kgdb_arch_set_breakpoint(struct kgdb_bkpt *bpt)
 	unsigned int instr;
 	struct ppc_inst *addr = (struct ppc_inst *)bpt->bpt_addr;
 
-	err = probe_kernel_address(addr, instr);
+	err = get_kernel_nofault(instr, (unsigned *) addr);
 	if (err)
 		return err;
 
diff --git a/arch/powerpc/kernel/kprobes.c b/arch/powerpc/kernel/kprobes.c
index 6f96f65ebfe8..9cc792a3a6a9 100644
--- a/arch/powerpc/kernel/kprobes.c
+++ b/arch/powerpc/kernel/kprobes.c
@@ -289,7 +289,7 @@ int kprobe_handler(struct pt_regs *regs)
 	if (!p) {
 		unsigned int instr;
 
-		if (probe_kernel_address(addr, instr))
+		if (get_kernel_nofault(instr, addr))
 			goto no_kprobe;
 
 		if (instr != BREAKPOINT_INSTRUCTION) {
diff --git a/arch/powerpc/kernel/module_64.c b/arch/powerpc/kernel/module_64.c
index f4c2fa190192..ae2b188365b1 100644
--- a/arch/powerpc/kernel/module_64.c
+++ b/arch/powerpc/kernel/module_64.c
@@ -756,7 +756,8 @@ int module_trampoline_target(struct module *mod, unsigned long addr,
 
 	stub = (struct ppc64_stub_entry *)addr;
 
-	if (probe_kernel_read(&magic, &stub->magic, sizeof(magic))) {
+	if (copy_from_kernel_nofault(&magic, &stub->magic,
+			sizeof(magic))) {
 		pr_err("%s: fault reading magic for stub %lx for %s\n", __func__, addr, mod->name);
 		return -EFAULT;
 	}
@@ -766,7 +767,8 @@ int module_trampoline_target(struct module *mod, unsigned long addr,
 		return -EFAULT;
 	}
 
-	if (probe_kernel_read(&funcdata, &stub->funcdata, sizeof(funcdata))) {
+	if (copy_from_kernel_nofault(&funcdata, &stub->funcdata,
+			sizeof(funcdata))) {
 		pr_err("%s: fault reading funcdata for stub %lx for %s\n", __func__, addr, mod->name);
                 return -EFAULT;
 	}
diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c
index 2168372b792d..74da65aacbc9 100644
--- a/arch/powerpc/kernel/paca.c
+++ b/arch/powerpc/kernel/paca.c
@@ -87,7 +87,7 @@ static void *__init alloc_shared_lppaca(unsigned long size, unsigned long align,
 	 * This is very early in boot, so no harm done if the kernel crashes at
 	 * this point.
 	 */
-	BUG_ON(shared_lppaca_size >= shared_lppaca_total_size);
+	BUG_ON(shared_lppaca_size > shared_lppaca_total_size);
 
 	return ptr;
 }
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 7bb7faf84490..794b754deec2 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -1252,29 +1252,31 @@ struct task_struct *__switch_to(struct task_struct *prev,
 static void show_instructions(struct pt_regs *regs)
 {
 	int i;
+	unsigned long nip = regs->nip;
 	unsigned long pc = regs->nip - (NR_INSN_TO_PRINT * 3 / 4 * sizeof(int));
 
 	printk("Instruction dump:");
 
+	/*
+	 * If we were executing with the MMU off for instructions, adjust pc
+	 * rather than printing XXXXXXXX.
+	 */
+	if (!IS_ENABLED(CONFIG_BOOKE) && !(regs->msr & MSR_IR)) {
+		pc = (unsigned long)phys_to_virt(pc);
+		nip = (unsigned long)phys_to_virt(regs->nip);
+	}
+
 	for (i = 0; i < NR_INSN_TO_PRINT; i++) {
 		int instr;
 
 		if (!(i % 8))
 			pr_cont("\n");
 
-#if !defined(CONFIG_BOOKE)
-		/* If executing with the IMMU off, adjust pc rather
-		 * than print XXXXXXXX.
-		 */
-		if (!(regs->msr & MSR_IR))
-			pc = (unsigned long)phys_to_virt(pc);
-#endif
-
 		if (!__kernel_text_address(pc) ||
-		    probe_kernel_address((const void *)pc, instr)) {
+		    get_kernel_nofault(instr, (const void *)pc)) {
 			pr_cont("XXXXXXXX ");
 		} else {
-			if (regs->nip == pc)
+			if (nip == pc)
 				pr_cont("<%08x> ", instr);
 			else
 				pr_cont("%08x ", instr);
@@ -1305,7 +1307,8 @@ void show_user_instructions(struct pt_regs *regs)
 		for (i = 0; i < 8 && n; i++, n--, pc += sizeof(int)) {
 			int instr;
 
-			if (probe_user_read(&instr, (void __user *)pc, sizeof(instr))) {
+			if (copy_from_user_nofault(&instr, (void __user *)pc,
+					sizeof(instr))) {
 				seq_buf_printf(&s, "XXXXXXXX ");
 				continue;
 			}
@@ -1590,7 +1593,7 @@ static void setup_ksp_vsid(struct task_struct *p, unsigned long sp)
 /*
  * Copy architecture-specific thread state
  */
-int copy_thread_tls(unsigned long clone_flags, unsigned long usp,
+int copy_thread(unsigned long clone_flags, unsigned long usp,
 		unsigned long kthread_arg, struct task_struct *p,
 		unsigned long tls)
 {
diff --git a/arch/powerpc/kernel/syscalls/syscall.tbl b/arch/powerpc/kernel/syscalls/syscall.tbl
index f833a3190822..dd87a782d80e 100644
--- a/arch/powerpc/kernel/syscalls/syscall.tbl
+++ b/arch/powerpc/kernel/syscalls/syscall.tbl
@@ -525,6 +525,7 @@
 435	32	clone3				ppc_clone3			sys_clone3
 435	64	clone3				sys_clone3
 435	spu	clone3				sys_ni_syscall
+436	common	close_range			sys_close_range
 437	common	openat2				sys_openat2
 438	common	pidfd_getfd			sys_pidfd_getfd
 439	common	faccessat2			sys_faccessat2
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 6fcae436ae51..f85539ebb513 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -183,6 +183,8 @@ static inline unsigned long read_spurr(unsigned long tb)
 
 #ifdef CONFIG_PPC_SPLPAR
 
+#include <asm/dtl.h>
+
 /*
  * Scan the dispatch trace log and count up the stolen time.
  * Should be called with interrupts disabled.
diff --git a/arch/powerpc/kernel/trace/ftrace.c b/arch/powerpc/kernel/trace/ftrace.c
index 5e399628f51a..c1fede6ec934 100644
--- a/arch/powerpc/kernel/trace/ftrace.c
+++ b/arch/powerpc/kernel/trace/ftrace.c
@@ -226,7 +226,7 @@ __ftrace_make_nop(struct module *mod,
 	unsigned long ip = rec->ip;
 	unsigned long tramp;
 
-	if (probe_kernel_read(&op, (void *)ip, MCOUNT_INSN_SIZE))
+	if (copy_from_kernel_nofault(&op, (void *)ip, MCOUNT_INSN_SIZE))
 		return -EFAULT;
 
 	/* Make sure that that this is still a 24bit jump */
@@ -249,7 +249,7 @@ __ftrace_make_nop(struct module *mod,
 	pr_devel("ip:%lx jumps to %lx", ip, tramp);
 
 	/* Find where the trampoline jumps to */
-	if (probe_kernel_read(jmp, (void *)tramp, sizeof(jmp))) {
+	if (copy_from_kernel_nofault(jmp, (void *)tramp, sizeof(jmp))) {
 		pr_err("Failed to read %lx\n", tramp);
 		return -EFAULT;
 	}
diff --git a/arch/powerpc/kvm/book3s_64_mmu_radix.c b/arch/powerpc/kvm/book3s_64_mmu_radix.c
index 3cb0c9843d01..777aa5625d5f 100644
--- a/arch/powerpc/kvm/book3s_64_mmu_radix.c
+++ b/arch/powerpc/kvm/book3s_64_mmu_radix.c
@@ -33,14 +33,15 @@ unsigned long __kvmhv_copy_tofrom_guest_radix(int lpid, int pid,
 					      gva_t eaddr, void *to, void *from,
 					      unsigned long n)
 {
-	int uninitialized_var(old_pid), old_lpid;
+	int old_pid, old_lpid;
 	unsigned long quadrant, ret = n;
 	bool is_load = !!to;
 
 	/* Can't access quadrants 1 or 2 in non-HV mode, call the HV to do it */
 	if (kvmhv_on_pseries())
 		return plpar_hcall_norets(H_COPY_TOFROM_GUEST, lpid, pid, eaddr,
-					  __pa(to), __pa(from), n);
+					  (to != NULL) ? __pa(to): 0,
+					  (from != NULL) ? __pa(from): 0, n);
 
 	quadrant = 1;
 	if (!pid)
@@ -64,9 +65,9 @@ unsigned long __kvmhv_copy_tofrom_guest_radix(int lpid, int pid,
 	isync();
 
 	if (is_load)
-		ret = probe_user_read(to, (const void __user *)from, n);
+		ret = copy_from_user_nofault(to, (const void __user *)from, n);
 	else
-		ret = probe_user_write((void __user *)to, from, n);
+		ret = copy_to_user_nofault((void __user *)to, from, n);
 
 	/* switch the pid first to avoid running host with unallocated pid */
 	if (quadrant == 1 && pid != old_pid)
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index 6bf66649ab92..ebb04f331ad3 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -74,6 +74,7 @@
 #include <asm/hw_breakpoint.h>
 #include <asm/kvm_book3s_uvmem.h>
 #include <asm/ultravisor.h>
+#include <asm/dtl.h>
 
 #include "book3s.h"
 
diff --git a/arch/powerpc/kvm/book3s_pr.c b/arch/powerpc/kvm/book3s_pr.c
index ef54f917bdaf..ed12dfbf9bb5 100644
--- a/arch/powerpc/kvm/book3s_pr.c
+++ b/arch/powerpc/kvm/book3s_pr.c
@@ -1828,9 +1828,6 @@ static int kvmppc_vcpu_run_pr(struct kvm_vcpu *vcpu)
 {
 	struct kvm_run *run = vcpu->run;
 	int ret;
-#ifdef CONFIG_ALTIVEC
-	unsigned long uninitialized_var(vrsave);
-#endif
 
 	/* Check if we can run the vcpu at all */
 	if (!vcpu->arch.sane) {
diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index dd7d141e33e8..aaa7b62f2f82 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -1110,7 +1110,7 @@ static inline u32 dp_to_sp(u64 fprd)
 static void kvmppc_complete_mmio_load(struct kvm_vcpu *vcpu)
 {
 	struct kvm_run *run = vcpu->run;
-	u64 uninitialized_var(gpr);
+	u64 gpr;
 
 	if (run->mmio.len > sizeof(gpr)) {
 		printk(KERN_ERR "bad MMIO length: %d\n", run->mmio.len);
diff --git a/arch/powerpc/lib/inst.c b/arch/powerpc/lib/inst.c
index aedfd6e31e53..9cc17eb62462 100644
--- a/arch/powerpc/lib/inst.c
+++ b/arch/powerpc/lib/inst.c
@@ -15,11 +15,11 @@ int probe_user_read_inst(struct ppc_inst *inst,
 	unsigned int val, suffix;
 	int err;
 
-	err = probe_user_read(&val, nip, sizeof(val));
+	err = copy_from_user_nofault(&val, nip, sizeof(val));
 	if (err)
 		return err;
 	if (get_op(val) == OP_PREFIX) {
-		err = probe_user_read(&suffix, (void __user *)nip + 4, 4);
+		err = copy_from_user_nofault(&suffix, (void __user *)nip + 4, 4);
 		*inst = ppc_inst_prefix(val, suffix);
 	} else {
 		*inst = ppc_inst(val);
@@ -33,11 +33,11 @@ int probe_kernel_read_inst(struct ppc_inst *inst,
 	unsigned int val, suffix;
 	int err;
 
-	err = probe_kernel_read(&val, src, sizeof(val));
+	err = copy_from_kernel_nofault(&val, src, sizeof(val));
 	if (err)
 		return err;
 	if (get_op(val) == OP_PREFIX) {
-		err = probe_kernel_read(&suffix, (void *)src + 4, 4);
+		err = copy_from_kernel_nofault(&suffix, (void *)src + 4, 4);
 		*inst = ppc_inst_prefix(val, suffix);
 	} else {
 		*inst = ppc_inst(val);
@@ -51,7 +51,7 @@ int probe_user_read_inst(struct ppc_inst *inst,
 	unsigned int val;
 	int err;
 
-	err = probe_user_read(&val, nip, sizeof(val));
+	err = copy_from_user_nofault(&val, nip, sizeof(val));
 	if (!err)
 		*inst = ppc_inst(val);
 
@@ -64,7 +64,7 @@ int probe_kernel_read_inst(struct ppc_inst *inst,
 	unsigned int val;
 	int err;
 
-	err = probe_kernel_read(&val, src, sizeof(val));
+	err = copy_from_kernel_nofault(&val, src, sizeof(val));
 	if (!err)
 		*inst = ppc_inst(val);
 
diff --git a/arch/powerpc/mm/book3s64/hash_utils.c b/arch/powerpc/mm/book3s64/hash_utils.c
index 468169e33c86..9b9f92ad0e7a 100644
--- a/arch/powerpc/mm/book3s64/hash_utils.c
+++ b/arch/powerpc/mm/book3s64/hash_utils.c
@@ -1559,6 +1559,7 @@ static void hash_preload(struct mm_struct *mm, pte_t *ptep, unsigned long ea,
 	pgd_t *pgdir;
 	int rc, ssize, update_flags = 0;
 	unsigned long access = _PAGE_PRESENT | _PAGE_READ | (is_exec ? _PAGE_EXEC : 0);
+	unsigned long flags;
 
 	BUG_ON(get_region_id(ea) != USER_REGION_ID);
 
@@ -1592,6 +1593,28 @@ static void hash_preload(struct mm_struct *mm, pte_t *ptep, unsigned long ea,
 		return;
 #endif /* CONFIG_PPC_64K_PAGES */
 
+	/*
+	 * __hash_page_* must run with interrupts off, as it sets the
+	 * H_PAGE_BUSY bit. It's possible for perf interrupts to hit at any
+	 * time and may take a hash fault reading the user stack, see
+	 * read_user_stack_slow() in the powerpc/perf code.
+	 *
+	 * If that takes a hash fault on the same page as we lock here, it
+	 * will bail out when seeing H_PAGE_BUSY set, and retry the access
+	 * leading to an infinite loop.
+	 *
+	 * Disabling interrupts here does not prevent perf interrupts, but it
+	 * will prevent them taking hash faults (see the NMI test in
+	 * do_hash_page), then read_user_stack's copy_from_user_nofault will
+	 * fail and perf will fall back to read_user_stack_slow(), which
+	 * walks the Linux page tables.
+	 *
+	 * Interrupts must also be off for the duration of the
+	 * mm_is_thread_local test and update, to prevent preempt running the
+	 * mm on another CPU (XXX: this may be racy vs kthread_use_mm).
+	 */
+	local_irq_save(flags);
+
 	/* Is that local to this CPU ? */
 	if (mm_is_thread_local(mm))
 		update_flags |= HPTE_LOCAL_UPDATE;
@@ -1614,6 +1637,8 @@ static void hash_preload(struct mm_struct *mm, pte_t *ptep, unsigned long ea,
 				   mm_ctx_user_psize(&mm->context),
 				   mm_ctx_user_psize(&mm->context),
 				   pte_val(*ptep));
+
+	local_irq_restore(flags);
 }
 
 /*
diff --git a/arch/powerpc/mm/book3s64/pkeys.c b/arch/powerpc/mm/book3s64/pkeys.c
index 1199fc2bfaec..d174106bab67 100644
--- a/arch/powerpc/mm/book3s64/pkeys.c
+++ b/arch/powerpc/mm/book3s64/pkeys.c
@@ -353,16 +353,15 @@ static bool pkey_access_permitted(int pkey, bool write, bool execute)
 	int pkey_shift;
 	u64 amr;
 
-	if (!is_pkey_enabled(pkey))
-		return true;
-
 	pkey_shift = pkeyshift(pkey);
-	if (execute && !(read_iamr() & (IAMR_EX_BIT << pkey_shift)))
-		return true;
+	if (execute)
+		return !(read_iamr() & (IAMR_EX_BIT << pkey_shift));
+
+	amr = read_amr();
+	if (write)
+		return !(amr & (AMR_WR_BIT << pkey_shift));
 
-	amr = read_amr(); /* Delay reading amr until absolutely needed */
-	return ((!write && !(amr & (AMR_RD_BIT << pkey_shift))) ||
-		(write &&  !(amr & (AMR_WR_BIT << pkey_shift))));
+	return !(amr & (AMR_RD_BIT << pkey_shift));
 }
 
 bool arch_pte_access_permitted(u64 pte, bool write, bool execute)
diff --git a/arch/powerpc/mm/nohash/kaslr_booke.c b/arch/powerpc/mm/nohash/kaslr_booke.c
index 4a75f2d9bf0e..bce0e5349978 100644
--- a/arch/powerpc/mm/nohash/kaslr_booke.c
+++ b/arch/powerpc/mm/nohash/kaslr_booke.c
@@ -14,6 +14,7 @@
 #include <linux/memblock.h>
 #include <linux/libfdt.h>
 #include <linux/crash_core.h>
+#include <asm/cacheflush.h>
 #include <asm/pgalloc.h>
 #include <asm/prom.h>
 #include <asm/kdump.h>
diff --git a/arch/powerpc/oprofile/backtrace.c b/arch/powerpc/oprofile/backtrace.c
index 6f347fa29f41..9db7ada79d10 100644
--- a/arch/powerpc/oprofile/backtrace.c
+++ b/arch/powerpc/oprofile/backtrace.c
@@ -33,7 +33,8 @@ static unsigned int user_getsp32(unsigned int sp, int is_first)
 	 * which means that we've done all that we can do from
 	 * interrupt context.
 	 */
-	if (probe_user_read(stack_frame, (void __user *)p, sizeof(stack_frame)))
+	if (copy_from_user_nofault(stack_frame, (void __user *)p,
+			sizeof(stack_frame)))
 		return 0;
 
 	if (!is_first)
@@ -51,7 +52,8 @@ static unsigned long user_getsp64(unsigned long sp, int is_first)
 {
 	unsigned long stack_frame[3];
 
-	if (probe_user_read(stack_frame, (void __user *)sp, sizeof(stack_frame)))
+	if (copy_from_user_nofault(stack_frame, (void __user *)sp,
+			sizeof(stack_frame)))
 		return 0;
 
 	if (!is_first)
diff --git a/arch/powerpc/perf/callchain_32.c b/arch/powerpc/perf/callchain_32.c
index f7d888d39cd3..542e68b8eae0 100644
--- a/arch/powerpc/perf/callchain_32.c
+++ b/arch/powerpc/perf/callchain_32.c
@@ -44,7 +44,7 @@ static int read_user_stack_32(unsigned int __user *ptr, unsigned int *ret)
 	    ((unsigned long)ptr & 3))
 		return -EFAULT;
 
-	rc = probe_user_read(ret, ptr, sizeof(*ret));
+	rc = copy_from_user_nofault(ret, ptr, sizeof(*ret));
 
 	if (IS_ENABLED(CONFIG_PPC64) && rc)
 		return read_user_stack_slow(ptr, ret, 4);
diff --git a/arch/powerpc/perf/callchain_64.c b/arch/powerpc/perf/callchain_64.c
index 814d1c2c2b9c..fa2a1b83b9b0 100644
--- a/arch/powerpc/perf/callchain_64.c
+++ b/arch/powerpc/perf/callchain_64.c
@@ -50,7 +50,7 @@ static int read_user_stack_64(unsigned long __user *ptr, unsigned long *ret)
 	    ((unsigned long)ptr & 7))
 		return -EFAULT;
 
-	if (!probe_user_read(ret, ptr, sizeof(*ret)))
+	if (!copy_from_user_nofault(ret, ptr, sizeof(*ret)))
 		return 0;
 
 	return read_user_stack_slow(ptr, ret, 8);
diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c
index 13b9dd5e4a76..01d70280d287 100644
--- a/arch/powerpc/perf/core-book3s.c
+++ b/arch/powerpc/perf/core-book3s.c
@@ -418,14 +418,16 @@ static __u64 power_pmu_bhrb_to(u64 addr)
 	__u64 target;
 
 	if (is_kernel_addr(addr)) {
-		if (probe_kernel_read(&instr, (void *)addr, sizeof(instr)))
+		if (copy_from_kernel_nofault(&instr, (void *)addr,
+				sizeof(instr)))
 			return 0;
 
 		return branch_target((struct ppc_inst *)&instr);
 	}
 
 	/* Userspace: need copy instruction here then translate it */
-	if (probe_user_read(&instr, (unsigned int __user *)addr, sizeof(instr)))
+	if (copy_from_user_nofault(&instr, (unsigned int __user *)addr,
+			sizeof(instr)))
 		return 0;
 
 	target = branch_target((struct ppc_inst *)&instr);
@@ -2177,6 +2179,12 @@ static void __perf_event_interrupt(struct pt_regs *regs)
 
 	perf_read_regs(regs);
 
+	/*
+	 * If perf interrupts hit in a local_irq_disable (soft-masked) region,
+	 * we consider them as NMIs. This is required to prevent hash faults on
+	 * user addresses when reading callchains. See the NMI test in
+	 * do_hash_page.
+	 */
 	nmi = perf_intr_is_nmi(regs);
 	if (nmi)
 		nmi_enter();
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pic.c b/arch/powerpc/platforms/52xx/mpc52xx_pic.c
index fc98912f42cf..76a8102bdb98 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_pic.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_pic.c
@@ -340,7 +340,7 @@ static int mpc52xx_irqhost_map(struct irq_domain *h, unsigned int virq,
 {
 	int l1irq;
 	int l2irq;
-	struct irq_chip *uninitialized_var(irqchip);
+	struct irq_chip *irqchip;
 	void *hndlr;
 	int type;
 	u32 reg;
diff --git a/arch/powerpc/platforms/cell/cpufreq_spudemand.c b/arch/powerpc/platforms/cell/cpufreq_spudemand.c
index 55b31eadb3c8..ca7849e113d7 100644
--- a/arch/powerpc/platforms/cell/cpufreq_spudemand.c
+++ b/arch/powerpc/platforms/cell/cpufreq_spudemand.c
@@ -126,30 +126,8 @@ static struct cpufreq_governor spu_governor = {
 	.stop = spu_gov_stop,
 	.owner = THIS_MODULE,
 };
-
-/*
- * module init and destoy
- */
-
-static int __init spu_gov_init(void)
-{
-	int ret;
-
-	ret = cpufreq_register_governor(&spu_governor);
-	if (ret)
-		printk(KERN_ERR "registration of governor failed\n");
-	return ret;
-}
-
-static void __exit spu_gov_exit(void)
-{
-	cpufreq_unregister_governor(&spu_governor);
-}
-
-
-module_init(spu_gov_init);
-module_exit(spu_gov_exit);
+cpufreq_governor_init(spu_governor);
+cpufreq_governor_exit(spu_governor);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Christian Krafft <krafft@de.ibm.com>");
-
diff --git a/arch/powerpc/platforms/cell/spu_callbacks.c b/arch/powerpc/platforms/cell/spu_callbacks.c
index cbee3666da07..abdef9bcf432 100644
--- a/arch/powerpc/platforms/cell/spu_callbacks.c
+++ b/arch/powerpc/platforms/cell/spu_callbacks.c
@@ -35,7 +35,7 @@
  */
 
 static void *spu_syscall_table[] = {
-#define __SYSCALL(nr, entry)	entry,
+#define __SYSCALL(nr, entry) [nr] = entry,
 #include <asm/syscall_table_spu.h>
 #undef __SYSCALL
 };
diff --git a/arch/powerpc/platforms/powernv/vas-fault.c b/arch/powerpc/platforms/powernv/vas-fault.c
index 266a6ca5e15e..3d21fce254b7 100644
--- a/arch/powerpc/platforms/powernv/vas-fault.c
+++ b/arch/powerpc/platforms/powernv/vas-fault.c
@@ -79,7 +79,7 @@ static void update_csb(struct vas_window *window,
 	csb_addr = (void __user *)be64_to_cpu(crb->csb_addr);
 
 	memset(&csb, 0, sizeof(csb));
-	csb.cc = CSB_CC_TRANSLATION;
+	csb.cc = CSB_CC_FAULT_ADDRESS;
 	csb.ce = CSB_CE_TERMINATION;
 	csb.cs = 0;
 	csb.count = 0;
diff --git a/arch/powerpc/platforms/pseries/dtl.c b/arch/powerpc/platforms/pseries/dtl.c
index eab8aa293743..982f069e4c31 100644
--- a/arch/powerpc/platforms/pseries/dtl.c
+++ b/arch/powerpc/platforms/pseries/dtl.c
@@ -12,6 +12,7 @@
 #include <asm/smp.h>
 #include <linux/uaccess.h>
 #include <asm/firmware.h>
+#include <asm/dtl.h>
 #include <asm/lppaca.h>
 #include <asm/debugfs.h>
 #include <asm/plpar_wrappers.h>
diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index fd26f3d21d7b..f71ff2c94efe 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -40,6 +40,7 @@
 #include <asm/fadump.h>
 #include <asm/asm-prototypes.h>
 #include <asm/debugfs.h>
+#include <asm/dtl.h>
 
 #include "pseries.h"
 
diff --git a/arch/powerpc/platforms/pseries/papr_scm.c b/arch/powerpc/platforms/pseries/papr_scm.c
index f35592423380..9c569078a09f 100644
--- a/arch/powerpc/platforms/pseries/papr_scm.c
+++ b/arch/powerpc/platforms/pseries/papr_scm.c
@@ -12,16 +12,57 @@
 #include <linux/libnvdimm.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
+#include <linux/seq_buf.h>
 
 #include <asm/plpar_wrappers.h>
+#include <asm/papr_pdsm.h>
 
 #define BIND_ANY_ADDR (~0ul)
 
 #define PAPR_SCM_DIMM_CMD_MASK \
 	((1ul << ND_CMD_GET_CONFIG_SIZE) | \
 	 (1ul << ND_CMD_GET_CONFIG_DATA) | \
-	 (1ul << ND_CMD_SET_CONFIG_DATA))
-
+	 (1ul << ND_CMD_SET_CONFIG_DATA) | \
+	 (1ul << ND_CMD_CALL))
+
+/* DIMM health bitmap bitmap indicators */
+/* SCM device is unable to persist memory contents */
+#define PAPR_PMEM_UNARMED                   (1ULL << (63 - 0))
+/* SCM device failed to persist memory contents */
+#define PAPR_PMEM_SHUTDOWN_DIRTY            (1ULL << (63 - 1))
+/* SCM device contents are persisted from previous IPL */
+#define PAPR_PMEM_SHUTDOWN_CLEAN            (1ULL << (63 - 2))
+/* SCM device contents are not persisted from previous IPL */
+#define PAPR_PMEM_EMPTY                     (1ULL << (63 - 3))
+/* SCM device memory life remaining is critically low */
+#define PAPR_PMEM_HEALTH_CRITICAL           (1ULL << (63 - 4))
+/* SCM device will be garded off next IPL due to failure */
+#define PAPR_PMEM_HEALTH_FATAL              (1ULL << (63 - 5))
+/* SCM contents cannot persist due to current platform health status */
+#define PAPR_PMEM_HEALTH_UNHEALTHY          (1ULL << (63 - 6))
+/* SCM device is unable to persist memory contents in certain conditions */
+#define PAPR_PMEM_HEALTH_NON_CRITICAL       (1ULL << (63 - 7))
+/* SCM device is encrypted */
+#define PAPR_PMEM_ENCRYPTED                 (1ULL << (63 - 8))
+/* SCM device has been scrubbed and locked */
+#define PAPR_PMEM_SCRUBBED_AND_LOCKED       (1ULL << (63 - 9))
+
+/* Bits status indicators for health bitmap indicating unarmed dimm */
+#define PAPR_PMEM_UNARMED_MASK (PAPR_PMEM_UNARMED |		\
+				PAPR_PMEM_HEALTH_UNHEALTHY)
+
+/* Bits status indicators for health bitmap indicating unflushed dimm */
+#define PAPR_PMEM_BAD_SHUTDOWN_MASK (PAPR_PMEM_SHUTDOWN_DIRTY)
+
+/* Bits status indicators for health bitmap indicating unrestored dimm */
+#define PAPR_PMEM_BAD_RESTORE_MASK  (PAPR_PMEM_EMPTY)
+
+/* Bit status indicators for smart event notification */
+#define PAPR_PMEM_SMART_EVENT_MASK (PAPR_PMEM_HEALTH_CRITICAL | \
+				    PAPR_PMEM_HEALTH_FATAL |	\
+				    PAPR_PMEM_HEALTH_UNHEALTHY)
+
+/* private struct associated with each region */
 struct papr_scm_priv {
 	struct platform_device *pdev;
 	struct device_node *dn;
@@ -39,6 +80,15 @@ struct papr_scm_priv {
 	struct resource res;
 	struct nd_region *region;
 	struct nd_interleave_set nd_set;
+
+	/* Protect dimm health data from concurrent read/writes */
+	struct mutex health_mutex;
+
+	/* Last time the health information of the dimm was updated */
+	unsigned long lasthealth_jiffies;
+
+	/* Health information for the dimm */
+	u64 health_bitmap;
 };
 
 static int drc_pmem_bind(struct papr_scm_priv *p)
@@ -144,6 +194,61 @@ err_out:
 	return drc_pmem_bind(p);
 }
 
+/*
+ * Issue hcall to retrieve dimm health info and populate papr_scm_priv with the
+ * health information.
+ */
+static int __drc_pmem_query_health(struct papr_scm_priv *p)
+{
+	unsigned long ret[PLPAR_HCALL_BUFSIZE];
+	long rc;
+
+	/* issue the hcall */
+	rc = plpar_hcall(H_SCM_HEALTH, ret, p->drc_index);
+	if (rc != H_SUCCESS) {
+		dev_err(&p->pdev->dev,
+			"Failed to query health information, Err:%ld\n", rc);
+		return -ENXIO;
+	}
+
+	p->lasthealth_jiffies = jiffies;
+	p->health_bitmap = ret[0] & ret[1];
+
+	dev_dbg(&p->pdev->dev,
+		"Queried dimm health info. Bitmap:0x%016lx Mask:0x%016lx\n",
+		ret[0], ret[1]);
+
+	return 0;
+}
+
+/* Min interval in seconds for assuming stable dimm health */
+#define MIN_HEALTH_QUERY_INTERVAL 60
+
+/* Query cached health info and if needed call drc_pmem_query_health */
+static int drc_pmem_query_health(struct papr_scm_priv *p)
+{
+	unsigned long cache_timeout;
+	int rc;
+
+	/* Protect concurrent modifications to papr_scm_priv */
+	rc = mutex_lock_interruptible(&p->health_mutex);
+	if (rc)
+		return rc;
+
+	/* Jiffies offset for which the health data is assumed to be same */
+	cache_timeout = p->lasthealth_jiffies +
+		msecs_to_jiffies(MIN_HEALTH_QUERY_INTERVAL * 1000);
+
+	/* Fetch new health info is its older than MIN_HEALTH_QUERY_INTERVAL */
+	if (time_after(jiffies, cache_timeout))
+		rc = __drc_pmem_query_health(p);
+	else
+		/* Assume cached health data is valid */
+		rc = 0;
+
+	mutex_unlock(&p->health_mutex);
+	return rc;
+}
 
 static int papr_scm_meta_get(struct papr_scm_priv *p,
 			     struct nd_cmd_get_config_data_hdr *hdr)
@@ -246,16 +351,250 @@ static int papr_scm_meta_set(struct papr_scm_priv *p,
 	return 0;
 }
 
+/*
+ * Do a sanity checks on the inputs args to dimm-control function and return
+ * '0' if valid. Validation of PDSM payloads happens later in
+ * papr_scm_service_pdsm.
+ */
+static int is_cmd_valid(struct nvdimm *nvdimm, unsigned int cmd, void *buf,
+			unsigned int buf_len)
+{
+	unsigned long cmd_mask = PAPR_SCM_DIMM_CMD_MASK;
+	struct nd_cmd_pkg *nd_cmd;
+	struct papr_scm_priv *p;
+	enum papr_pdsm pdsm;
+
+	/* Only dimm-specific calls are supported atm */
+	if (!nvdimm)
+		return -EINVAL;
+
+	/* get the provider data from struct nvdimm */
+	p = nvdimm_provider_data(nvdimm);
+
+	if (!test_bit(cmd, &cmd_mask)) {
+		dev_dbg(&p->pdev->dev, "Unsupported cmd=%u\n", cmd);
+		return -EINVAL;
+	}
+
+	/* For CMD_CALL verify pdsm request */
+	if (cmd == ND_CMD_CALL) {
+		/* Verify the envelope and envelop size */
+		if (!buf ||
+		    buf_len < (sizeof(struct nd_cmd_pkg) + ND_PDSM_HDR_SIZE)) {
+			dev_dbg(&p->pdev->dev, "Invalid pkg size=%u\n",
+				buf_len);
+			return -EINVAL;
+		}
+
+		/* Verify that the nd_cmd_pkg.nd_family is correct */
+		nd_cmd = (struct nd_cmd_pkg *)buf;
+
+		if (nd_cmd->nd_family != NVDIMM_FAMILY_PAPR) {
+			dev_dbg(&p->pdev->dev, "Invalid pkg family=0x%llx\n",
+				nd_cmd->nd_family);
+			return -EINVAL;
+		}
+
+		pdsm = (enum papr_pdsm)nd_cmd->nd_command;
+
+		/* Verify if the pdsm command is valid */
+		if (pdsm <= PAPR_PDSM_MIN || pdsm >= PAPR_PDSM_MAX) {
+			dev_dbg(&p->pdev->dev, "PDSM[0x%x]: Invalid PDSM\n",
+				pdsm);
+			return -EINVAL;
+		}
+
+		/* Have enough space to hold returned 'nd_pkg_pdsm' header */
+		if (nd_cmd->nd_size_out < ND_PDSM_HDR_SIZE) {
+			dev_dbg(&p->pdev->dev, "PDSM[0x%x]: Invalid payload\n",
+				pdsm);
+			return -EINVAL;
+		}
+	}
+
+	/* Let the command be further processed */
+	return 0;
+}
+
+/* Fetch the DIMM health info and populate it in provided package. */
+static int papr_pdsm_health(struct papr_scm_priv *p,
+			    union nd_pdsm_payload *payload)
+{
+	int rc;
+
+	/* Ensure dimm health mutex is taken preventing concurrent access */
+	rc = mutex_lock_interruptible(&p->health_mutex);
+	if (rc)
+		goto out;
+
+	/* Always fetch upto date dimm health data ignoring cached values */
+	rc = __drc_pmem_query_health(p);
+	if (rc) {
+		mutex_unlock(&p->health_mutex);
+		goto out;
+	}
+
+	/* update health struct with various flags derived from health bitmap */
+	payload->health = (struct nd_papr_pdsm_health) {
+		.extension_flags = 0,
+		.dimm_unarmed = !!(p->health_bitmap & PAPR_PMEM_UNARMED_MASK),
+		.dimm_bad_shutdown = !!(p->health_bitmap & PAPR_PMEM_BAD_SHUTDOWN_MASK),
+		.dimm_bad_restore = !!(p->health_bitmap & PAPR_PMEM_BAD_RESTORE_MASK),
+		.dimm_scrubbed = !!(p->health_bitmap & PAPR_PMEM_SCRUBBED_AND_LOCKED),
+		.dimm_locked = !!(p->health_bitmap & PAPR_PMEM_SCRUBBED_AND_LOCKED),
+		.dimm_encrypted = !!(p->health_bitmap & PAPR_PMEM_ENCRYPTED),
+		.dimm_health = PAPR_PDSM_DIMM_HEALTHY,
+	};
+
+	/* Update field dimm_health based on health_bitmap flags */
+	if (p->health_bitmap & PAPR_PMEM_HEALTH_FATAL)
+		payload->health.dimm_health = PAPR_PDSM_DIMM_FATAL;
+	else if (p->health_bitmap & PAPR_PMEM_HEALTH_CRITICAL)
+		payload->health.dimm_health = PAPR_PDSM_DIMM_CRITICAL;
+	else if (p->health_bitmap & PAPR_PMEM_HEALTH_UNHEALTHY)
+		payload->health.dimm_health = PAPR_PDSM_DIMM_UNHEALTHY;
+
+	/* struct populated hence can release the mutex now */
+	mutex_unlock(&p->health_mutex);
+	rc = sizeof(struct nd_papr_pdsm_health);
+
+out:
+	return rc;
+}
+
+/*
+ * 'struct pdsm_cmd_desc'
+ * Identifies supported PDSMs' expected length of in/out payloads
+ * and pdsm service function.
+ *
+ * size_in	: Size of input payload if any in the PDSM request.
+ * size_out	: Size of output payload if any in the PDSM request.
+ * service	: Service function for the PDSM request. Return semantics:
+ *		  rc < 0 : Error servicing PDSM and rc indicates the error.
+ *		  rc >=0 : Serviced successfully and 'rc' indicate number of
+ *			bytes written to payload.
+ */
+struct pdsm_cmd_desc {
+	u32 size_in;
+	u32 size_out;
+	int (*service)(struct papr_scm_priv *dimm,
+		       union nd_pdsm_payload *payload);
+};
+
+/* Holds all supported PDSMs' command descriptors */
+static const struct pdsm_cmd_desc __pdsm_cmd_descriptors[] = {
+	[PAPR_PDSM_MIN] = {
+		.size_in = 0,
+		.size_out = 0,
+		.service = NULL,
+	},
+	/* New PDSM command descriptors to be added below */
+
+	[PAPR_PDSM_HEALTH] = {
+		.size_in = 0,
+		.size_out = sizeof(struct nd_papr_pdsm_health),
+		.service = papr_pdsm_health,
+	},
+	/* Empty */
+	[PAPR_PDSM_MAX] = {
+		.size_in = 0,
+		.size_out = 0,
+		.service = NULL,
+	},
+};
+
+/* Given a valid pdsm cmd return its command descriptor else return NULL */
+static inline const struct pdsm_cmd_desc *pdsm_cmd_desc(enum papr_pdsm cmd)
+{
+	if (cmd >= 0 || cmd < ARRAY_SIZE(__pdsm_cmd_descriptors))
+		return &__pdsm_cmd_descriptors[cmd];
+
+	return NULL;
+}
+
+/*
+ * For a given pdsm request call an appropriate service function.
+ * Returns errors if any while handling the pdsm command package.
+ */
+static int papr_scm_service_pdsm(struct papr_scm_priv *p,
+				 struct nd_cmd_pkg *pkg)
+{
+	/* Get the PDSM header and PDSM command */
+	struct nd_pkg_pdsm *pdsm_pkg = (struct nd_pkg_pdsm *)pkg->nd_payload;
+	enum papr_pdsm pdsm = (enum papr_pdsm)pkg->nd_command;
+	const struct pdsm_cmd_desc *pdsc;
+	int rc;
+
+	/* Fetch corresponding pdsm descriptor for validation and servicing */
+	pdsc = pdsm_cmd_desc(pdsm);
+
+	/* Validate pdsm descriptor */
+	/* Ensure that reserved fields are 0 */
+	if (pdsm_pkg->reserved[0] || pdsm_pkg->reserved[1]) {
+		dev_dbg(&p->pdev->dev, "PDSM[0x%x]: Invalid reserved field\n",
+			pdsm);
+		return -EINVAL;
+	}
+
+	/* If pdsm expects some input, then ensure that the size_in matches */
+	if (pdsc->size_in &&
+	    pkg->nd_size_in != (pdsc->size_in + ND_PDSM_HDR_SIZE)) {
+		dev_dbg(&p->pdev->dev, "PDSM[0x%x]: Mismatched size_in=%d\n",
+			pdsm, pkg->nd_size_in);
+		return -EINVAL;
+	}
+
+	/* If pdsm wants to return data, then ensure that  size_out matches */
+	if (pdsc->size_out &&
+	    pkg->nd_size_out != (pdsc->size_out + ND_PDSM_HDR_SIZE)) {
+		dev_dbg(&p->pdev->dev, "PDSM[0x%x]: Mismatched size_out=%d\n",
+			pdsm, pkg->nd_size_out);
+		return -EINVAL;
+	}
+
+	/* Service the pdsm */
+	if (pdsc->service) {
+		dev_dbg(&p->pdev->dev, "PDSM[0x%x]: Servicing..\n", pdsm);
+
+		rc = pdsc->service(p, &pdsm_pkg->payload);
+
+		if (rc < 0) {
+			/* error encountered while servicing pdsm */
+			pdsm_pkg->cmd_status = rc;
+			pkg->nd_fw_size = ND_PDSM_HDR_SIZE;
+		} else {
+			/* pdsm serviced and 'rc' bytes written to payload */
+			pdsm_pkg->cmd_status = 0;
+			pkg->nd_fw_size = ND_PDSM_HDR_SIZE + rc;
+		}
+	} else {
+		dev_dbg(&p->pdev->dev, "PDSM[0x%x]: Unsupported PDSM request\n",
+			pdsm);
+		pdsm_pkg->cmd_status = -ENOENT;
+		pkg->nd_fw_size = ND_PDSM_HDR_SIZE;
+	}
+
+	return pdsm_pkg->cmd_status;
+}
+
 static int papr_scm_ndctl(struct nvdimm_bus_descriptor *nd_desc,
 			  struct nvdimm *nvdimm, unsigned int cmd, void *buf,
 			  unsigned int buf_len, int *cmd_rc)
 {
 	struct nd_cmd_get_config_size *get_size_hdr;
+	struct nd_cmd_pkg *call_pkg = NULL;
 	struct papr_scm_priv *p;
+	int rc;
 
-	/* Only dimm-specific calls are supported atm */
-	if (!nvdimm)
-		return -EINVAL;
+	rc = is_cmd_valid(nvdimm, cmd, buf, buf_len);
+	if (rc) {
+		pr_debug("Invalid cmd=0x%x. Err=%d\n", cmd, rc);
+		return rc;
+	}
+
+	/* Use a local variable in case cmd_rc pointer is NULL */
+	if (!cmd_rc)
+		cmd_rc = &rc;
 
 	p = nvdimm_provider_data(nvdimm);
 
@@ -277,7 +616,13 @@ static int papr_scm_ndctl(struct nvdimm_bus_descriptor *nd_desc,
 		*cmd_rc = papr_scm_meta_set(p, buf);
 		break;
 
+	case ND_CMD_CALL:
+		call_pkg = (struct nd_cmd_pkg *)buf;
+		*cmd_rc = papr_scm_service_pdsm(p, call_pkg);
+		break;
+
 	default:
+		dev_dbg(&p->pdev->dev, "Unknown command = %d\n", cmd);
 		return -EINVAL;
 	}
 
@@ -286,6 +631,64 @@ static int papr_scm_ndctl(struct nvdimm_bus_descriptor *nd_desc,
 	return 0;
 }
 
+static ssize_t flags_show(struct device *dev,
+			  struct device_attribute *attr, char *buf)
+{
+	struct nvdimm *dimm = to_nvdimm(dev);
+	struct papr_scm_priv *p = nvdimm_provider_data(dimm);
+	struct seq_buf s;
+	u64 health;
+	int rc;
+
+	rc = drc_pmem_query_health(p);
+	if (rc)
+		return rc;
+
+	/* Copy health_bitmap locally, check masks & update out buffer */
+	health = READ_ONCE(p->health_bitmap);
+
+	seq_buf_init(&s, buf, PAGE_SIZE);
+	if (health & PAPR_PMEM_UNARMED_MASK)
+		seq_buf_printf(&s, "not_armed ");
+
+	if (health & PAPR_PMEM_BAD_SHUTDOWN_MASK)
+		seq_buf_printf(&s, "flush_fail ");
+
+	if (health & PAPR_PMEM_BAD_RESTORE_MASK)
+		seq_buf_printf(&s, "restore_fail ");
+
+	if (health & PAPR_PMEM_ENCRYPTED)
+		seq_buf_printf(&s, "encrypted ");
+
+	if (health & PAPR_PMEM_SMART_EVENT_MASK)
+		seq_buf_printf(&s, "smart_notify ");
+
+	if (health & PAPR_PMEM_SCRUBBED_AND_LOCKED)
+		seq_buf_printf(&s, "scrubbed locked ");
+
+	if (seq_buf_used(&s))
+		seq_buf_printf(&s, "\n");
+
+	return seq_buf_used(&s);
+}
+DEVICE_ATTR_RO(flags);
+
+/* papr_scm specific dimm attributes */
+static struct attribute *papr_nd_attributes[] = {
+	&dev_attr_flags.attr,
+	NULL,
+};
+
+static struct attribute_group papr_nd_attribute_group = {
+	.name = "papr",
+	.attrs = papr_nd_attributes,
+};
+
+static const struct attribute_group *papr_nd_attr_groups[] = {
+	&papr_nd_attribute_group,
+	NULL,
+};
+
 static int papr_scm_nvdimm_init(struct papr_scm_priv *p)
 {
 	struct device *dev = &p->pdev->dev;
@@ -312,8 +715,8 @@ static int papr_scm_nvdimm_init(struct papr_scm_priv *p)
 	dimm_flags = 0;
 	set_bit(NDD_LABELING, &dimm_flags);
 
-	p->nvdimm = nvdimm_create(p->bus, p, NULL, dimm_flags,
-				  PAPR_SCM_DIMM_CMD_MASK, 0, NULL);
+	p->nvdimm = nvdimm_create(p->bus, p, papr_nd_attr_groups,
+				  dimm_flags, PAPR_SCM_DIMM_CMD_MASK, 0, NULL);
 	if (!p->nvdimm) {
 		dev_err(dev, "Error creating DIMM object for %pOF\n", p->dn);
 		goto err;
@@ -399,6 +802,9 @@ static int papr_scm_probe(struct platform_device *pdev)
 	if (!p)
 		return -ENOMEM;
 
+	/* Initialize the dimm mutex */
+	mutex_init(&p->health_mutex);
+
 	/* optional DT properties */
 	of_property_read_u32(dn, "ibm,metadata-size", &metadata_size);
 
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 2db8469e475f..27094c872fd6 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -70,6 +70,7 @@
 #include <asm/idle.h>
 #include <asm/swiotlb.h>
 #include <asm/svm.h>
+#include <asm/dtl.h>
 
 #include "pseries.h"
 #include "../../../../drivers/pci/pci.h"
diff --git a/arch/powerpc/platforms/pseries/svm.c b/arch/powerpc/platforms/pseries/svm.c
index 40c0637203d5..e6d7a344d9f2 100644
--- a/arch/powerpc/platforms/pseries/svm.c
+++ b/arch/powerpc/platforms/pseries/svm.c
@@ -11,6 +11,7 @@
 #include <asm/svm.h>
 #include <asm/swiotlb.h>
 #include <asm/ultravisor.h>
+#include <asm/dtl.h>
 
 static int __init init_svm(void)
 {
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 4a8874bc1057..040b9d01c079 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -1066,10 +1066,10 @@ int fsl_pci_mcheck_exception(struct pt_regs *regs)
 
 	if (is_in_pci_mem_space(addr)) {
 		if (user_mode(regs))
-			ret = probe_user_read(&inst, (void __user *)regs->nip,
-					      sizeof(inst));
+			ret = copy_from_user_nofault(&inst,
+					(void __user *)regs->nip, sizeof(inst));
 		else
-			ret = probe_kernel_address((void *)regs->nip, inst);
+			ret = get_kernel_nofault(inst, (void *)regs->nip);
 
 		if (!ret && mcheck_handle_load(regs, inst)) {
 			regs->nip += 4;
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index 128192e14ff2..6c4bce7cad8a 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -23,6 +23,8 @@ config RISCV
 	select ARCH_HAS_SET_DIRECT_MAP
 	select ARCH_HAS_SET_MEMORY
 	select ARCH_HAS_STRICT_KERNEL_RWX if MMU
+	select ARCH_OPTIONAL_KERNEL_RWX if ARCH_HAS_STRICT_KERNEL_RWX
+	select ARCH_OPTIONAL_KERNEL_RWX_DEFAULT
 	select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT if MMU
 	select ARCH_WANT_FRAME_POINTERS
 	select ARCH_WANT_HUGE_PMD_SHARE if 64BIT
@@ -52,7 +54,6 @@ config RISCV
 	select HAVE_ARCH_SECCOMP_FILTER
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_ASM_MODVERSIONS
-	select HAVE_COPY_THREAD_TLS
 	select HAVE_DMA_CONTIGUOUS if MMU
 	select HAVE_EBPF_JIT if MMU
 	select HAVE_FUTEX_CMPXCHG if FUTEX
diff --git a/arch/riscv/include/asm/atomic.h b/arch/riscv/include/asm/atomic.h
index 96f95c9ebd97..400a8c8b6de7 100644
--- a/arch/riscv/include/asm/atomic.h
+++ b/arch/riscv/include/asm/atomic.h
@@ -19,8 +19,6 @@
 #include <asm/cmpxchg.h>
 #include <asm/barrier.h>
 
-#define ATOMIC_INIT(i)	{ (i) }
-
 #define __atomic_acquire_fence()					\
 	__asm__ __volatile__(RISCV_ACQUIRE_BARRIER "" ::: "memory")
 
diff --git a/arch/riscv/include/asm/barrier.h b/arch/riscv/include/asm/barrier.h
index 3f1737f301cc..d0e24aaa2aa0 100644
--- a/arch/riscv/include/asm/barrier.h
+++ b/arch/riscv/include/asm/barrier.h
@@ -58,8 +58,16 @@ do {									\
  * The AQ/RL pair provides a RCpc critical section, but there's not really any
  * way we can take advantage of that here because the ordering is only enforced
  * on that one lock.  Thus, we're just doing a full fence.
+ *
+ * Since we allow writeX to be called from preemptive regions we need at least
+ * an "o" in the predecessor set to ensure device writes are visible before the
+ * task is marked as available for scheduling on a new hart.  While I don't see
+ * any concrete reason we need a full IO fence, it seems safer to just upgrade
+ * this in order to avoid any IO crossing a scheduling boundary.  In both
+ * instances the scheduler pairs this with an mb(), so nothing is necessary on
+ * the new hart.
  */
-#define smp_mb__after_spinlock()	RISCV_FENCE(rw,rw)
+#define smp_mb__after_spinlock()	RISCV_FENCE(iorw,iorw)
 
 #include <asm-generic/barrier.h>
 
diff --git a/arch/riscv/include/asm/cmpxchg.h b/arch/riscv/include/asm/cmpxchg.h
index d969bab4a26b..262e5bbb2776 100644
--- a/arch/riscv/include/asm/cmpxchg.h
+++ b/arch/riscv/include/asm/cmpxchg.h
@@ -179,7 +179,7 @@
 			"	bnez %1, 0b\n"				\
 			"1:\n"						\
 			: "=&r" (__ret), "=&r" (__rc), "+A" (*__ptr)	\
-			: "rJ" (__old), "rJ" (__new)			\
+			: "rJ" ((long)__old), "rJ" (__new)		\
 			: "memory");					\
 		break;							\
 	case 8:								\
@@ -224,7 +224,7 @@
 			RISCV_ACQUIRE_BARRIER				\
 			"1:\n"						\
 			: "=&r" (__ret), "=&r" (__rc), "+A" (*__ptr)	\
-			: "rJ" (__old), "rJ" (__new)			\
+			: "rJ" ((long)__old), "rJ" (__new)		\
 			: "memory");					\
 		break;							\
 	case 8:								\
@@ -270,7 +270,7 @@
 			"	bnez %1, 0b\n"				\
 			"1:\n"						\
 			: "=&r" (__ret), "=&r" (__rc), "+A" (*__ptr)	\
-			: "rJ" (__old), "rJ" (__new)			\
+			: "rJ" ((long)__old), "rJ" (__new)		\
 			: "memory");					\
 		break;							\
 	case 8:								\
@@ -316,7 +316,7 @@
 			"	fence rw, rw\n"				\
 			"1:\n"						\
 			: "=&r" (__ret), "=&r" (__rc), "+A" (*__ptr)	\
-			: "rJ" (__old), "rJ" (__new)			\
+			: "rJ" ((long)__old), "rJ" (__new)		\
 			: "memory");					\
 		break;							\
 	case 8:								\
diff --git a/arch/riscv/include/asm/gdb_xml.h b/arch/riscv/include/asm/gdb_xml.h
index 041b45f5b997..09342111f227 100644
--- a/arch/riscv/include/asm/gdb_xml.h
+++ b/arch/riscv/include/asm/gdb_xml.h
@@ -3,8 +3,7 @@
 #ifndef __ASM_GDB_XML_H_
 #define __ASM_GDB_XML_H_
 
-#define kgdb_arch_gdb_stub_feature riscv_gdb_stub_feature
-static const char riscv_gdb_stub_feature[64] =
+const char riscv_gdb_stub_feature[64] =
 			"PacketSize=800;qXfer:features:read+;";
 
 static const char gdb_xfer_read_target[31] = "qXfer:features:read:target.xml:";
diff --git a/arch/riscv/include/asm/kgdb.h b/arch/riscv/include/asm/kgdb.h
index 8177a457caff..46677daf708b 100644
--- a/arch/riscv/include/asm/kgdb.h
+++ b/arch/riscv/include/asm/kgdb.h
@@ -19,7 +19,6 @@
 
 #ifndef	__ASSEMBLY__
 
-extern int kgdb_has_hit_break(unsigned long addr);
 extern unsigned long kgdb_compiled_break;
 
 static inline void arch_kgdb_breakpoint(void)
@@ -106,7 +105,9 @@ static inline void arch_kgdb_breakpoint(void)
 #define DBG_REG_BADADDR_OFF 34
 #define DBG_REG_CAUSE_OFF 35
 
-#include <asm/gdb_xml.h>
+extern const char riscv_gdb_stub_feature[64];
+
+#define kgdb_arch_gdb_stub_feature riscv_gdb_stub_feature
 
 #endif
 #endif
diff --git a/arch/riscv/include/asm/thread_info.h b/arch/riscv/include/asm/thread_info.h
index 1dd12a0cbb2b..464a2bbc97ea 100644
--- a/arch/riscv/include/asm/thread_info.h
+++ b/arch/riscv/include/asm/thread_info.h
@@ -12,7 +12,11 @@
 #include <linux/const.h>
 
 /* thread information allocation */
+#ifdef CONFIG_64BIT
+#define THREAD_SIZE_ORDER	(2)
+#else
 #define THREAD_SIZE_ORDER	(1)
+#endif
 #define THREAD_SIZE		(PAGE_SIZE << THREAD_SIZE_ORDER)
 
 #ifndef __ASSEMBLY__
diff --git a/arch/riscv/include/asm/vdso/gettimeofday.h b/arch/riscv/include/asm/vdso/gettimeofday.h
index c8e818688ec1..3099362d9f26 100644
--- a/arch/riscv/include/asm/vdso/gettimeofday.h
+++ b/arch/riscv/include/asm/vdso/gettimeofday.h
@@ -4,6 +4,7 @@
 
 #ifndef __ASSEMBLY__
 
+#include <asm/barrier.h>
 #include <asm/unistd.h>
 #include <asm/csr.h>
 #include <uapi/linux/time.h>
diff --git a/arch/riscv/kernel/ftrace.c b/arch/riscv/kernel/ftrace.c
index 08396614d6f4..2ff63d0cbb50 100644
--- a/arch/riscv/kernel/ftrace.c
+++ b/arch/riscv/kernel/ftrace.c
@@ -38,7 +38,8 @@ static int ftrace_check_current_call(unsigned long hook_pos,
 	 * Read the text we want to modify;
 	 * return must be -EFAULT on read error
 	 */
-	if (probe_kernel_read(replaced, (void *)hook_pos, MCOUNT_INSN_SIZE))
+	if (copy_from_kernel_nofault(replaced, (void *)hook_pos,
+			MCOUNT_INSN_SIZE))
 		return -EFAULT;
 
 	/*
diff --git a/arch/riscv/kernel/kgdb.c b/arch/riscv/kernel/kgdb.c
index f16ade84a11f..963ed7edcff2 100644
--- a/arch/riscv/kernel/kgdb.c
+++ b/arch/riscv/kernel/kgdb.c
@@ -44,25 +44,25 @@ DECLARE_INSN(c_beqz, MATCH_C_BEQZ, MASK_C_BEQZ)
 DECLARE_INSN(c_bnez, MATCH_C_BNEZ, MASK_C_BNEZ)
 DECLARE_INSN(sret, MATCH_SRET, MASK_SRET)
 
-int decode_register_index(unsigned long opcode, int offset)
+static int decode_register_index(unsigned long opcode, int offset)
 {
 	return (opcode >> offset) & 0x1F;
 }
 
-int decode_register_index_short(unsigned long opcode, int offset)
+static int decode_register_index_short(unsigned long opcode, int offset)
 {
 	return ((opcode >> offset) & 0x7) + 8;
 }
 
 /* Calculate the new address for after a step */
-int get_step_address(struct pt_regs *regs, unsigned long *next_addr)
+static int get_step_address(struct pt_regs *regs, unsigned long *next_addr)
 {
 	unsigned long pc = regs->epc;
 	unsigned long *regs_ptr = (unsigned long *)regs;
 	unsigned int rs1_num, rs2_num;
 	int op_code;
 
-	if (probe_kernel_address((void *)pc, op_code))
+	if (get_kernel_nofault(op_code, (void *)pc))
 		return -EINVAL;
 	if ((op_code & __INSN_LENGTH_MASK) != __INSN_LENGTH_GE_32) {
 		if (is_c_jalr_insn(op_code) || is_c_jr_insn(op_code)) {
@@ -136,7 +136,7 @@ int get_step_address(struct pt_regs *regs, unsigned long *next_addr)
 	return 0;
 }
 
-int do_single_step(struct pt_regs *regs)
+static int do_single_step(struct pt_regs *regs)
 {
 	/* Determine where the target instruction will send us to */
 	unsigned long addr = 0;
@@ -146,14 +146,14 @@ int do_single_step(struct pt_regs *regs)
 		return error;
 
 	/* Store the op code in the stepped address */
-	error = probe_kernel_address((void *)addr, stepped_opcode);
+	error = get_kernel_nofault(stepped_opcode, (void *)addr);
 	if (error)
 		return error;
 
 	stepped_address = addr;
 
 	/* Replace the op code with the break instruction */
-	error = probe_kernel_write((void *)stepped_address,
+	error = copy_to_kernel_nofault((void *)stepped_address,
 				   arch_kgdb_ops.gdb_bpt_instr,
 				   BREAK_INSTR_SIZE);
 	/* Flush and return */
@@ -173,7 +173,7 @@ int do_single_step(struct pt_regs *regs)
 static void undo_single_step(struct pt_regs *regs)
 {
 	if (stepped_opcode != 0) {
-		probe_kernel_write((void *)stepped_address,
+		copy_to_kernel_nofault((void *)stepped_address,
 				   (void *)&stepped_opcode, BREAK_INSTR_SIZE);
 		flush_icache_range(stepped_address,
 				   stepped_address + BREAK_INSTR_SIZE);
@@ -320,7 +320,7 @@ int kgdb_arch_handle_exception(int vector, int signo, int err_code,
 	return err;
 }
 
-int kgdb_riscv_kgdbbreak(unsigned long addr)
+static int kgdb_riscv_kgdbbreak(unsigned long addr)
 {
 	if (stepped_address == addr)
 		return KGDB_SW_SINGLE_STEP;
diff --git a/arch/riscv/kernel/patch.c b/arch/riscv/kernel/patch.c
index d4a64dfed342..3fe7a5296aa5 100644
--- a/arch/riscv/kernel/patch.c
+++ b/arch/riscv/kernel/patch.c
@@ -63,7 +63,7 @@ static int patch_insn_write(void *addr, const void *insn, size_t len)
 
 	waddr = patch_map(addr, FIX_TEXT_POKE0);
 
-	ret = probe_kernel_write(waddr, insn, len);
+	ret = copy_to_kernel_nofault(waddr, insn, len);
 
 	patch_unmap(FIX_TEXT_POKE0);
 
@@ -76,7 +76,7 @@ NOKPROBE_SYMBOL(patch_insn_write);
 #else
 static int patch_insn_write(void *addr, const void *insn, size_t len)
 {
-	return probe_kernel_write(addr, insn, len);
+	return copy_to_kernel_nofault(addr, insn, len);
 }
 NOKPROBE_SYMBOL(patch_insn_write);
 #endif /* CONFIG_MMU */
diff --git a/arch/riscv/kernel/process.c b/arch/riscv/kernel/process.c
index 824d117cf202..31f39442df72 100644
--- a/arch/riscv/kernel/process.c
+++ b/arch/riscv/kernel/process.c
@@ -101,8 +101,8 @@ int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
 	return 0;
 }
 
-int copy_thread_tls(unsigned long clone_flags, unsigned long usp,
-	unsigned long arg, struct task_struct *p, unsigned long tls)
+int copy_thread(unsigned long clone_flags, unsigned long usp, unsigned long arg,
+		struct task_struct *p, unsigned long tls)
 {
 	struct pt_regs *childregs = task_pt_regs(p);
 
diff --git a/arch/riscv/kernel/sys_riscv.c b/arch/riscv/kernel/sys_riscv.c
index f3619f59d85c..12f8a7fce78b 100644
--- a/arch/riscv/kernel/sys_riscv.c
+++ b/arch/riscv/kernel/sys_riscv.c
@@ -8,6 +8,7 @@
 #include <linux/syscalls.h>
 #include <asm/unistd.h>
 #include <asm/cacheflush.h>
+#include <asm-generic/mman-common.h>
 
 static long riscv_sys_mmap(unsigned long addr, unsigned long len,
 			   unsigned long prot, unsigned long flags,
@@ -16,6 +17,11 @@ static long riscv_sys_mmap(unsigned long addr, unsigned long len,
 {
 	if (unlikely(offset & (~PAGE_MASK >> page_shift_offset)))
 		return -EINVAL;
+
+	if ((prot & PROT_WRITE) && (prot & PROT_EXEC))
+		if (unlikely(!(prot & PROT_READ)))
+			return -EINVAL;
+
 	return ksys_mmap_pgoff(addr, len, prot, flags, fd,
 			       offset >> (PAGE_SHIFT - page_shift_offset));
 }
diff --git a/arch/riscv/kernel/traps.c b/arch/riscv/kernel/traps.c
index ecec1778e3a4..7d95cce5e47c 100644
--- a/arch/riscv/kernel/traps.c
+++ b/arch/riscv/kernel/traps.c
@@ -137,7 +137,7 @@ static inline unsigned long get_break_insn_length(unsigned long pc)
 {
 	bug_insn_t insn;
 
-	if (probe_kernel_address((bug_insn_t *)pc, insn))
+	if (get_kernel_nofault(insn, (bug_insn_t *)pc))
 		return 0;
 
 	return GET_INSN_LENGTH(insn);
@@ -165,7 +165,7 @@ int is_valid_bugaddr(unsigned long pc)
 
 	if (pc < VMALLOC_START)
 		return 0;
-	if (probe_kernel_address((bug_insn_t *)pc, insn))
+	if (get_kernel_nofault(insn, (bug_insn_t *)pc))
 		return 0;
 	if ((insn & __INSN_LENGTH_MASK) == __INSN_LENGTH_32)
 		return (insn == __BUG_INSN_32);
diff --git a/arch/riscv/kernel/vdso/Makefile b/arch/riscv/kernel/vdso/Makefile
index 38ba55b0eb9d..e4c7c2c8a02f 100644
--- a/arch/riscv/kernel/vdso/Makefile
+++ b/arch/riscv/kernel/vdso/Makefile
@@ -17,7 +17,7 @@ vdso-syms += flush_icache
 obj-vdso = $(patsubst %, %.o, $(vdso-syms)) note.o
 
 ifneq ($(c-gettimeofday-y),)
-  CFLAGS_vgettimeofday.o += -include $(c-gettimeofday-y)
+  CFLAGS_vgettimeofday.o += -fPIC -include $(c-gettimeofday-y)
 endif
 
 # Build rules
@@ -27,6 +27,9 @@ obj-vdso := $(addprefix $(obj)/, $(obj-vdso))
 obj-y += vdso.o vdso-syms.o
 CPPFLAGS_vdso.lds += -P -C -U$(ARCH)
 
+# Disable -pg to prevent insert call site
+CFLAGS_REMOVE_vgettimeofday.o = $(CC_FLAGS_FTRACE) -Os
+
 # Disable gcov profiling for VDSO code
 GCOV_PROFILE := n
 
diff --git a/arch/riscv/kernel/vdso/vgettimeofday.c b/arch/riscv/kernel/vdso/vgettimeofday.c
index d264943e2e47..cc0d80699c31 100644
--- a/arch/riscv/kernel/vdso/vgettimeofday.c
+++ b/arch/riscv/kernel/vdso/vgettimeofday.c
@@ -9,16 +9,22 @@
 #include <linux/time.h>
 #include <linux/types.h>
 
+extern
+int __vdso_clock_gettime(clockid_t clock, struct __kernel_timespec *ts);
 int __vdso_clock_gettime(clockid_t clock, struct __kernel_timespec *ts)
 {
 	return __cvdso_clock_gettime(clock, ts);
 }
 
+extern
+int __vdso_gettimeofday(struct __kernel_old_timeval *tv, struct timezone *tz);
 int __vdso_gettimeofday(struct __kernel_old_timeval *tv, struct timezone *tz)
 {
 	return __cvdso_gettimeofday(tv, tz);
 }
 
+extern
+int __vdso_clock_getres(clockid_t clock_id, struct __kernel_timespec *res);
 int __vdso_clock_getres(clockid_t clock_id, struct __kernel_timespec *res)
 {
 	return __cvdso_clock_getres(clock_id, res);
diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
index f4adb3684f3d..79e9d55bdf1a 100644
--- a/arch/riscv/mm/init.c
+++ b/arch/riscv/mm/init.c
@@ -95,19 +95,40 @@ void __init mem_init(void)
 #ifdef CONFIG_BLK_DEV_INITRD
 static void __init setup_initrd(void)
 {
+	phys_addr_t start;
 	unsigned long size;
 
-	if (initrd_start >= initrd_end) {
-		pr_info("initrd not found or empty");
+	/* Ignore the virtul address computed during device tree parsing */
+	initrd_start = initrd_end = 0;
+
+	if (!phys_initrd_size)
+		return;
+	/*
+	 * Round the memory region to page boundaries as per free_initrd_mem()
+	 * This allows us to detect whether the pages overlapping the initrd
+	 * are in use, but more importantly, reserves the entire set of pages
+	 * as we don't want these pages allocated for other purposes.
+	 */
+	start = round_down(phys_initrd_start, PAGE_SIZE);
+	size = phys_initrd_size + (phys_initrd_start - start);
+	size = round_up(size, PAGE_SIZE);
+
+	if (!memblock_is_region_memory(start, size)) {
+		pr_err("INITRD: 0x%08llx+0x%08lx is not a memory region",
+		       (u64)start, size);
 		goto disable;
 	}
-	if (__pa_symbol(initrd_end) > PFN_PHYS(max_low_pfn)) {
-		pr_err("initrd extends beyond end of memory");
+
+	if (memblock_is_region_reserved(start, size)) {
+		pr_err("INITRD: 0x%08llx+0x%08lx overlaps in-use memory region\n",
+		       (u64)start, size);
 		goto disable;
 	}
 
-	size = initrd_end - initrd_start;
-	memblock_reserve(__pa_symbol(initrd_start), size);
+	memblock_reserve(start, size);
+	/* Now convert initrd to virtual addresses */
+	initrd_start = (unsigned long)__va(phys_initrd_start);
+	initrd_end = initrd_start + phys_initrd_size;
 	initrd_below_start_ok = 1;
 
 	pr_info("Initial ramdisk at: 0x%p (%lu bytes)\n",
@@ -126,33 +147,36 @@ void __init setup_bootmem(void)
 {
 	struct memblock_region *reg;
 	phys_addr_t mem_size = 0;
+	phys_addr_t total_mem = 0;
+	phys_addr_t mem_start, end = 0;
 	phys_addr_t vmlinux_end = __pa_symbol(&_end);
 	phys_addr_t vmlinux_start = __pa_symbol(&_start);
 
 	/* Find the memory region containing the kernel */
 	for_each_memblock(memory, reg) {
-		phys_addr_t end = reg->base + reg->size;
-
-		if (reg->base <= vmlinux_start && vmlinux_end <= end) {
-			mem_size = min(reg->size, (phys_addr_t)-PAGE_OFFSET);
-
-			/*
-			 * Remove memblock from the end of usable area to the
-			 * end of region
-			 */
-			if (reg->base + mem_size < end)
-				memblock_remove(reg->base + mem_size,
-						end - reg->base - mem_size);
-		}
+		end = reg->base + reg->size;
+		if (!total_mem)
+			mem_start = reg->base;
+		if (reg->base <= vmlinux_start && vmlinux_end <= end)
+			BUG_ON(reg->size == 0);
+		total_mem = total_mem + reg->size;
 	}
-	BUG_ON(mem_size == 0);
+
+	/*
+	 * Remove memblock from the end of usable area to the
+	 * end of region
+	 */
+	mem_size = min(total_mem, (phys_addr_t)-PAGE_OFFSET);
+	if (mem_start + mem_size < end)
+		memblock_remove(mem_start + mem_size,
+				end - mem_start - mem_size);
 
 	/* Reserve from the start of the kernel to the end of the kernel */
 	memblock_reserve(vmlinux_start, vmlinux_end - vmlinux_start);
 
-	set_max_mapnr(PFN_DOWN(mem_size));
 	max_pfn = PFN_DOWN(memblock_end_of_DRAM());
 	max_low_pfn = max_pfn;
+	set_max_mapnr(max_low_pfn);
 
 #ifdef CONFIG_BLK_DEV_INITRD
 	setup_initrd();
diff --git a/arch/riscv/mm/kasan_init.c b/arch/riscv/mm/kasan_init.c
index 4a8b61806633..87b4ab3d3c77 100644
--- a/arch/riscv/mm/kasan_init.c
+++ b/arch/riscv/mm/kasan_init.c
@@ -44,7 +44,7 @@ asmlinkage void __init kasan_early_init(void)
 				(__pa(((uintptr_t) kasan_early_shadow_pmd))),
 				__pgprot(_PAGE_TABLE)));
 
-	flush_tlb_all();
+	local_flush_tlb_all();
 }
 
 static void __init populate(void *start, void *end)
@@ -79,7 +79,7 @@ static void __init populate(void *start, void *end)
 			pfn_pgd(PFN_DOWN(__pa(&pmd[offset])),
 				__pgprot(_PAGE_TABLE)));
 
-	flush_tlb_all();
+	local_flush_tlb_all();
 	memset(start, 0, end - start);
 }
 
diff --git a/arch/riscv/mm/pageattr.c b/arch/riscv/mm/pageattr.c
index ec2c70f84994..289a9a5ea5b5 100644
--- a/arch/riscv/mm/pageattr.c
+++ b/arch/riscv/mm/pageattr.c
@@ -151,6 +151,7 @@ int set_memory_nx(unsigned long addr, int numpages)
 
 int set_direct_map_invalid_noflush(struct page *page)
 {
+	int ret;
 	unsigned long start = (unsigned long)page_address(page);
 	unsigned long end = start + PAGE_SIZE;
 	struct pageattr_masks masks = {
@@ -158,11 +159,16 @@ int set_direct_map_invalid_noflush(struct page *page)
 		.clear_mask = __pgprot(_PAGE_PRESENT)
 	};
 
-	return walk_page_range(&init_mm, start, end, &pageattr_ops, &masks);
+	mmap_read_lock(&init_mm);
+	ret = walk_page_range(&init_mm, start, end, &pageattr_ops, &masks);
+	mmap_read_unlock(&init_mm);
+
+	return ret;
 }
 
 int set_direct_map_default_noflush(struct page *page)
 {
+	int ret;
 	unsigned long start = (unsigned long)page_address(page);
 	unsigned long end = start + PAGE_SIZE;
 	struct pageattr_masks masks = {
@@ -170,7 +176,11 @@ int set_direct_map_default_noflush(struct page *page)
 		.clear_mask = __pgprot(0)
 	};
 
-	return walk_page_range(&init_mm, start, end, &pageattr_ops, &masks);
+	mmap_read_lock(&init_mm);
+	ret = walk_page_range(&init_mm, start, end, &pageattr_ops, &masks);
+	mmap_read_unlock(&init_mm);
+
+	return ret;
 }
 
 void __kernel_map_pages(struct page *page, int numpages, int enable)
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 194824932a60..8c0b52940165 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -102,7 +102,6 @@ config S390
 	select ARCH_INLINE_WRITE_UNLOCK_BH
 	select ARCH_INLINE_WRITE_UNLOCK_IRQ
 	select ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE
-	select ARCH_KEEP_MEMBLOCK
 	select ARCH_STACKWALK
 	select ARCH_SUPPORTS_ATOMIC_RMW
 	select ARCH_SUPPORTS_NUMA_BALANCING
@@ -113,6 +112,7 @@ config S390
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select BUILDTIME_TABLE_SORT
 	select CLONE_BACKWARDS2
+	select DMA_OPS if PCI
 	select DYNAMIC_FTRACE if FUNCTION_TRACER
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_CPU_AUTOPROBE
@@ -126,6 +126,7 @@ config S390
 	select HAVE_ARCH_JUMP_LABEL_RELATIVE
 	select HAVE_ARCH_KASAN
 	select HAVE_ARCH_KASAN_VMALLOC
+	select CLOCKSOURCE_VALIDATE_LAST_CYCLE
 	select CPU_NO_EFFICIENT_FFS if !HAVE_MARCH_Z9_109_FEATURES
 	select HAVE_ARCH_SECCOMP_FILTER
 	select HAVE_ARCH_SOFT_DIRTY
@@ -136,7 +137,6 @@ config S390
 	select HAVE_EBPF_JIT if PACK_STACK && HAVE_MARCH_Z196_FEATURES
 	select HAVE_CMPXCHG_DOUBLE
 	select HAVE_CMPXCHG_LOCAL
-	select HAVE_COPY_THREAD_TLS
 	select HAVE_DEBUG_KMEMLEAK
 	select HAVE_DMA_CONTIGUOUS
 	select HAVE_DYNAMIC_FTRACE
@@ -145,6 +145,7 @@ config S390
 	select HAVE_EFFICIENT_UNALIGNED_ACCESS
 	select HAVE_FENTRY
 	select HAVE_FTRACE_MCOUNT_RECORD
+	select HAVE_FUNCTION_ERROR_INJECTION
 	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_FUNCTION_TRACER
 	select HAVE_FUTEX_CMPXCHG if FUTEX
@@ -462,6 +463,7 @@ config NUMA
 
 config NODES_SHIFT
 	int
+	depends on NEED_MULTIPLE_NODES
 	default "1"
 
 config SCHED_SMT
@@ -625,10 +627,6 @@ config ARCH_ENABLE_MEMORY_HOTREMOVE
 config ARCH_ENABLE_SPLIT_PMD_PTLOCK
 	def_bool y
 
-config FORCE_MAX_ZONEORDER
-	int
-	default "9"
-
 config MAX_PHYSMEM_BITS
 	int "Maximum size of supported physical memory in bits (42-53)"
 	range 42 53
diff --git a/arch/s390/appldata/appldata_os.c b/arch/s390/appldata/appldata_os.c
index 5503217366ec..a363d30ce739 100644
--- a/arch/s390/appldata/appldata_os.c
+++ b/arch/s390/appldata/appldata_os.c
@@ -129,8 +129,7 @@ static void appldata_get_os_data(void *data)
 
 	os_data->nr_cpus = j;
 
-	new_size = sizeof(struct appldata_os_data) +
-		   (os_data->nr_cpus * sizeof(struct appldata_os_per_cpu));
+	new_size = struct_size(os_data, os_cpu, os_data->nr_cpus);
 	if (ops.size != new_size) {
 		if (ops.active) {
 			rc = appldata_diag(APPLDATA_RECORD_OS_ID,
@@ -165,8 +164,7 @@ static int __init appldata_os_init(void)
 {
 	int rc, max_size;
 
-	max_size = sizeof(struct appldata_os_data) +
-		   (num_possible_cpus() * sizeof(struct appldata_os_per_cpu));
+	max_size = struct_size(appldata_os_data, os_cpu, num_possible_cpus());
 	if (max_size > APPLDATA_MAX_REC_SIZE) {
 		pr_err("Maximum OS record size %i exceeds the maximum "
 		       "record size %i\n", max_size, APPLDATA_MAX_REC_SIZE);
diff --git a/arch/s390/configs/debug_defconfig b/arch/s390/configs/debug_defconfig
index 46038bc58c9e..0cf9a82326a8 100644
--- a/arch/s390/configs/debug_defconfig
+++ b/arch/s390/configs/debug_defconfig
@@ -1,5 +1,6 @@
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_WATCH_QUEUE=y
 CONFIG_AUDIT=y
 CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -14,7 +15,6 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_NUMA_BALANCING=y
 CONFIG_MEMCG=y
-CONFIG_MEMCG_SWAP=y
 CONFIG_BLK_CGROUP=y
 CONFIG_CFS_BANDWIDTH=y
 CONFIG_RT_GROUP_SCHED=y
@@ -31,9 +31,9 @@ CONFIG_NAMESPACES=y
 CONFIG_USER_NS=y
 CONFIG_CHECKPOINT_RESTORE=y
 CONFIG_SCHED_AUTOGROUP=y
-CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 # CONFIG_SYSFS_SYSCALL is not set
+CONFIG_BPF_LSM=y
 CONFIG_BPF_SYSCALL=y
 CONFIG_USERFAULTFD=y
 # CONFIG_COMPAT_BRK is not set
@@ -51,14 +51,11 @@ CONFIG_CHSC_SCH=y
 CONFIG_VFIO_CCW=m
 CONFIG_VFIO_AP=m
 CONFIG_CRASH_DUMP=y
-CONFIG_HIBERNATION=y
-CONFIG_PM_DEBUG=y
 CONFIG_PROTECTED_VIRTUALIZATION_GUEST=y
 CONFIG_CMM=m
 CONFIG_APPLDATA_BASE=y
 CONFIG_KVM=m
-CONFIG_VHOST_NET=m
-CONFIG_VHOST_VSOCK=m
+CONFIG_S390_UNWIND_SELFTEST=y
 CONFIG_OPROFILE=m
 CONFIG_KPROBES=y
 CONFIG_JUMP_LABEL=y
@@ -77,6 +74,8 @@ CONFIG_BLK_DEV_THROTTLING=y
 CONFIG_BLK_WBT=y
 CONFIG_BLK_CGROUP_IOLATENCY=y
 CONFIG_BLK_CGROUP_IOCOST=y
+CONFIG_BLK_INLINE_ENCRYPTION=y
+CONFIG_BLK_INLINE_ENCRYPTION_FALLBACK=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_IBM_PARTITION=y
 CONFIG_BSD_DISKLABEL=y
@@ -96,7 +95,6 @@ CONFIG_CMA_DEBUG=y
 CONFIG_CMA_DEBUGFS=y
 CONFIG_MEM_SOFT_DIRTY=y
 CONFIG_ZSWAP=y
-CONFIG_ZBUD=m
 CONFIG_ZSMALLOC=m
 CONFIG_ZSMALLOC_STAT=y
 CONFIG_DEFERRED_STRUCT_PAGE_INIT=y
@@ -130,6 +128,7 @@ CONFIG_SYN_COOKIES=y
 CONFIG_NET_IPVTI=m
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
+CONFIG_INET_ESPINTCP=y
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_DIAG=m
 CONFIG_INET_UDP_DIAG=m
@@ -144,6 +143,7 @@ CONFIG_TCP_CONG_ILLINOIS=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
+CONFIG_INET6_ESPINTCP=y
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_MIP6=m
 CONFIG_IPV6_VTI=m
@@ -151,7 +151,10 @@ CONFIG_IPV6_SIT=m
 CONFIG_IPV6_GRE=m
 CONFIG_IPV6_MULTIPLE_TABLES=y
 CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_RPL_LWTUNNEL=y
+CONFIG_MPTCP=y
 CONFIG_NETFILTER=y
+CONFIG_BRIDGE_NETFILTER=m
 CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CONNTRACK_SECMARK=y
 CONFIG_NF_CONNTRACK_EVENTS=y
@@ -317,6 +320,7 @@ CONFIG_L2TP_V3=y
 CONFIG_L2TP_IP=m
 CONFIG_L2TP_ETH=m
 CONFIG_BRIDGE=m
+CONFIG_BRIDGE_MRP=y
 CONFIG_VLAN_8021Q=m
 CONFIG_VLAN_8021Q_GVRP=y
 CONFIG_NET_SCHED=y
@@ -341,6 +345,7 @@ CONFIG_NET_SCH_CODEL=m
 CONFIG_NET_SCH_FQ_CODEL=m
 CONFIG_NET_SCH_INGRESS=m
 CONFIG_NET_SCH_PLUG=m
+CONFIG_NET_SCH_ETS=m
 CONFIG_NET_CLS_BASIC=m
 CONFIG_NET_CLS_TCINDEX=m
 CONFIG_NET_CLS_ROUTE4=m
@@ -364,6 +369,7 @@ CONFIG_NET_ACT_PEDIT=m
 CONFIG_NET_ACT_SIMP=m
 CONFIG_NET_ACT_SKBEDIT=m
 CONFIG_NET_ACT_CSUM=m
+CONFIG_NET_ACT_GATE=m
 CONFIG_DNS_RESOLVER=y
 CONFIG_OPENVSWITCH=m
 CONFIG_VSOCKETS=m
@@ -374,6 +380,7 @@ CONFIG_BPF_JIT=y
 CONFIG_NET_PKTGEN=m
 # CONFIG_NET_DROP_MONITOR is not set
 CONFIG_PCI=y
+# CONFIG_PCIEASPM is not set
 CONFIG_PCI_DEBUG=y
 CONFIG_HOTPLUG_PCI=y
 CONFIG_HOTPLUG_PCI_S390=y
@@ -435,6 +442,7 @@ CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
 CONFIG_DM_MULTIPATH_QL=m
 CONFIG_DM_MULTIPATH_ST=m
+CONFIG_DM_MULTIPATH_HST=m
 CONFIG_DM_DELAY=m
 CONFIG_DM_UEVENT=y
 CONFIG_DM_FLAKEY=m
@@ -448,6 +456,8 @@ CONFIG_EQUALIZER=m
 CONFIG_IFB=m
 CONFIG_MACVLAN=m
 CONFIG_MACVTAP=m
+CONFIG_VXLAN=m
+CONFIG_BAREUDP=m
 CONFIG_TUN=m
 CONFIG_VETH=m
 CONFIG_VIRTIO_NET=m
@@ -481,7 +491,6 @@ CONFIG_NLMON=m
 CONFIG_MLX4_EN=m
 CONFIG_MLX5_CORE=m
 CONFIG_MLX5_CORE_EN=y
-# CONFIG_MLXFW is not set
 # CONFIG_NET_VENDOR_MICREL is not set
 # CONFIG_NET_VENDOR_MICROCHIP is not set
 # CONFIG_NET_VENDOR_MICROSEMI is not set
@@ -514,6 +523,7 @@ CONFIG_MLX5_CORE_EN=y
 # CONFIG_NET_VENDOR_TI is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
+# CONFIG_NET_VENDOR_XILINX is not set
 CONFIG_PPP=m
 CONFIG_PPP_BSDCOMP=m
 CONFIG_PPP_DEFLATE=m
@@ -561,6 +571,8 @@ CONFIG_VFIO_MDEV_DEVICE=m
 CONFIG_VIRTIO_PCI=m
 CONFIG_VIRTIO_BALLOON=m
 CONFIG_VIRTIO_INPUT=y
+CONFIG_VHOST_NET=m
+CONFIG_VHOST_VSOCK=m
 CONFIG_S390_CCW_IOMMU=y
 CONFIG_S390_AP_IOMMU=y
 CONFIG_EXT4_FS=y
@@ -608,6 +620,7 @@ CONFIG_ZISOFS=y
 CONFIG_UDF_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
+CONFIG_EXFAT_FS=m
 CONFIG_NTFS_FS=m
 CONFIG_NTFS_RW=y
 CONFIG_PROC_KCORE=y
@@ -650,8 +663,8 @@ CONFIG_NLS_UTF8=m
 CONFIG_DLM=m
 CONFIG_UNICODE=y
 CONFIG_PERSISTENT_KEYRINGS=y
-CONFIG_BIG_KEYS=y
 CONFIG_ENCRYPTED_KEYS=m
+CONFIG_KEY_NOTIFICATIONS=y
 CONFIG_SECURITY=y
 CONFIG_SECURITY_NETWORK=y
 CONFIG_FORTIFY_SOURCE=y
@@ -675,8 +688,11 @@ CONFIG_CRYPTO_TEST=m
 CONFIG_CRYPTO_DH=m
 CONFIG_CRYPTO_ECDH=m
 CONFIG_CRYPTO_ECRDSA=m
+CONFIG_CRYPTO_CURVE25519=m
+CONFIG_CRYPTO_GCM=y
 CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_AEGIS128=m
+CONFIG_CRYPTO_SEQIV=y
 CONFIG_CRYPTO_CFB=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
@@ -685,6 +701,7 @@ CONFIG_CRYPTO_ADIANTUM=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_CRC32=m
+CONFIG_CRYPTO_BLAKE2S=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_RMD128=m
 CONFIG_CRYPTO_RMD160=m
@@ -701,6 +718,7 @@ CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_SALSA20=m
@@ -719,6 +737,9 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 CONFIG_CRYPTO_STATS=y
+CONFIG_CRYPTO_LIB_BLAKE2S=m
+CONFIG_CRYPTO_LIB_CURVE25519=m
+CONFIG_CRYPTO_LIB_CHACHA20POLY1305=m
 CONFIG_ZCRYPT=m
 CONFIG_PKEY=m
 CONFIG_CRYPTO_PAES_S390=m
@@ -774,6 +795,7 @@ CONFIG_DEBUG_SHIRQ=y
 CONFIG_PANIC_ON_OOPS=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_WQ_WATCHDOG=y
+CONFIG_TEST_LOCKUP=m
 CONFIG_DEBUG_TIMEKEEPING=y
 CONFIG_PROVE_LOCKING=y
 CONFIG_LOCK_STAT=y
@@ -786,7 +808,9 @@ CONFIG_BUG_ON_DATA_CORRUPTION=y
 CONFIG_DEBUG_CREDENTIALS=y
 CONFIG_RCU_TORTURE_TEST=m
 CONFIG_RCU_CPU_STALL_TIMEOUT=300
+# CONFIG_RCU_TRACE is not set
 CONFIG_LATENCYTOP=y
+CONFIG_BOOTTIME_TRACING=y
 CONFIG_FUNCTION_PROFILER=y
 CONFIG_STACK_TRACER=y
 CONFIG_IRQSOFF_TRACER=y
@@ -808,10 +832,12 @@ CONFIG_FAULT_INJECTION_DEBUG_FS=y
 CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
 CONFIG_LKDTM=m
 CONFIG_TEST_LIST_SORT=y
+CONFIG_TEST_MIN_HEAP=y
 CONFIG_TEST_SORT=y
 CONFIG_KPROBES_SANITY_TEST=y
 CONFIG_RBTREE_TEST=y
 CONFIG_INTERVAL_TREE_TEST=m
 CONFIG_PERCPU_TEST=m
 CONFIG_ATOMIC64_SELFTEST=y
+CONFIG_TEST_BITOPS=m
 CONFIG_TEST_BPF=m
diff --git a/arch/s390/configs/defconfig b/arch/s390/configs/defconfig
index 7cd0648c1f4e..5df9759e8ff6 100644
--- a/arch/s390/configs/defconfig
+++ b/arch/s390/configs/defconfig
@@ -1,5 +1,6 @@
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_WATCH_QUEUE=y
 CONFIG_AUDIT=y
 CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -13,7 +14,6 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_NUMA_BALANCING=y
 CONFIG_MEMCG=y
-CONFIG_MEMCG_SWAP=y
 CONFIG_BLK_CGROUP=y
 CONFIG_CFS_BANDWIDTH=y
 CONFIG_RT_GROUP_SCHED=y
@@ -30,9 +30,9 @@ CONFIG_NAMESPACES=y
 CONFIG_USER_NS=y
 CONFIG_CHECKPOINT_RESTORE=y
 CONFIG_SCHED_AUTOGROUP=y
-CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 # CONFIG_SYSFS_SYSCALL is not set
+CONFIG_BPF_LSM=y
 CONFIG_BPF_SYSCALL=y
 CONFIG_USERFAULTFD=y
 # CONFIG_COMPAT_BRK is not set
@@ -41,7 +41,6 @@ CONFIG_LIVEPATCH=y
 CONFIG_TUNE_ZEC12=y
 CONFIG_NR_CPUS=512
 CONFIG_NUMA=y
-# CONFIG_NUMA_EMU is not set
 CONFIG_HZ_100=y
 CONFIG_KEXEC_FILE=y
 CONFIG_KEXEC_SIG=y
@@ -51,14 +50,11 @@ CONFIG_CHSC_SCH=y
 CONFIG_VFIO_CCW=m
 CONFIG_VFIO_AP=m
 CONFIG_CRASH_DUMP=y
-CONFIG_HIBERNATION=y
-CONFIG_PM_DEBUG=y
 CONFIG_PROTECTED_VIRTUALIZATION_GUEST=y
 CONFIG_CMM=m
 CONFIG_APPLDATA_BASE=y
 CONFIG_KVM=m
-CONFIG_VHOST_NET=m
-CONFIG_VHOST_VSOCK=m
+CONFIG_S390_UNWIND_SELFTEST=m
 CONFIG_OPROFILE=m
 CONFIG_KPROBES=y
 CONFIG_JUMP_LABEL=y
@@ -74,6 +70,8 @@ CONFIG_BLK_DEV_THROTTLING=y
 CONFIG_BLK_WBT=y
 CONFIG_BLK_CGROUP_IOLATENCY=y
 CONFIG_BLK_CGROUP_IOCOST=y
+CONFIG_BLK_INLINE_ENCRYPTION=y
+CONFIG_BLK_INLINE_ENCRYPTION_FALLBACK=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_IBM_PARTITION=y
 CONFIG_BSD_DISKLABEL=y
@@ -91,7 +89,6 @@ CONFIG_CLEANCACHE=y
 CONFIG_FRONTSWAP=y
 CONFIG_MEM_SOFT_DIRTY=y
 CONFIG_ZSWAP=y
-CONFIG_ZBUD=m
 CONFIG_ZSMALLOC=m
 CONFIG_ZSMALLOC_STAT=y
 CONFIG_DEFERRED_STRUCT_PAGE_INIT=y
@@ -125,6 +122,7 @@ CONFIG_SYN_COOKIES=y
 CONFIG_NET_IPVTI=m
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
+CONFIG_INET_ESPINTCP=y
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_DIAG=m
 CONFIG_INET_UDP_DIAG=m
@@ -139,6 +137,7 @@ CONFIG_TCP_CONG_ILLINOIS=m
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
+CONFIG_INET6_ESPINTCP=y
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_MIP6=m
 CONFIG_IPV6_VTI=m
@@ -146,7 +145,10 @@ CONFIG_IPV6_SIT=m
 CONFIG_IPV6_GRE=m
 CONFIG_IPV6_MULTIPLE_TABLES=y
 CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_RPL_LWTUNNEL=y
+CONFIG_MPTCP=y
 CONFIG_NETFILTER=y
+CONFIG_BRIDGE_NETFILTER=m
 CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CONNTRACK_SECMARK=y
 CONFIG_NF_CONNTRACK_EVENTS=y
@@ -311,6 +313,7 @@ CONFIG_L2TP_V3=y
 CONFIG_L2TP_IP=m
 CONFIG_L2TP_ETH=m
 CONFIG_BRIDGE=m
+CONFIG_BRIDGE_MRP=y
 CONFIG_VLAN_8021Q=m
 CONFIG_VLAN_8021Q_GVRP=y
 CONFIG_NET_SCHED=y
@@ -335,6 +338,7 @@ CONFIG_NET_SCH_CODEL=m
 CONFIG_NET_SCH_FQ_CODEL=m
 CONFIG_NET_SCH_INGRESS=m
 CONFIG_NET_SCH_PLUG=m
+CONFIG_NET_SCH_ETS=m
 CONFIG_NET_CLS_BASIC=m
 CONFIG_NET_CLS_TCINDEX=m
 CONFIG_NET_CLS_ROUTE4=m
@@ -358,6 +362,7 @@ CONFIG_NET_ACT_PEDIT=m
 CONFIG_NET_ACT_SIMP=m
 CONFIG_NET_ACT_SKBEDIT=m
 CONFIG_NET_ACT_CSUM=m
+CONFIG_NET_ACT_GATE=m
 CONFIG_DNS_RESOLVER=y
 CONFIG_OPENVSWITCH=m
 CONFIG_VSOCKETS=m
@@ -368,6 +373,7 @@ CONFIG_BPF_JIT=y
 CONFIG_NET_PKTGEN=m
 # CONFIG_NET_DROP_MONITOR is not set
 CONFIG_PCI=y
+# CONFIG_PCIEASPM is not set
 CONFIG_HOTPLUG_PCI=y
 CONFIG_HOTPLUG_PCI_S390=y
 CONFIG_UEVENT_HELPER=y
@@ -430,6 +436,7 @@ CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
 CONFIG_DM_MULTIPATH_QL=m
 CONFIG_DM_MULTIPATH_ST=m
+CONFIG_DM_MULTIPATH_HST=m
 CONFIG_DM_DELAY=m
 CONFIG_DM_UEVENT=y
 CONFIG_DM_FLAKEY=m
@@ -444,6 +451,8 @@ CONFIG_EQUALIZER=m
 CONFIG_IFB=m
 CONFIG_MACVLAN=m
 CONFIG_MACVTAP=m
+CONFIG_VXLAN=m
+CONFIG_BAREUDP=m
 CONFIG_TUN=m
 CONFIG_VETH=m
 CONFIG_VIRTIO_NET=m
@@ -477,7 +486,6 @@ CONFIG_NLMON=m
 CONFIG_MLX4_EN=m
 CONFIG_MLX5_CORE=m
 CONFIG_MLX5_CORE_EN=y
-# CONFIG_MLXFW is not set
 # CONFIG_NET_VENDOR_MICREL is not set
 # CONFIG_NET_VENDOR_MICROCHIP is not set
 # CONFIG_NET_VENDOR_MICROSEMI is not set
@@ -510,6 +518,7 @@ CONFIG_MLX5_CORE_EN=y
 # CONFIG_NET_VENDOR_TI is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
+# CONFIG_NET_VENDOR_XILINX is not set
 CONFIG_PPP=m
 CONFIG_PPP_BSDCOMP=m
 CONFIG_PPP_DEFLATE=m
@@ -557,6 +566,8 @@ CONFIG_VFIO_MDEV_DEVICE=m
 CONFIG_VIRTIO_PCI=m
 CONFIG_VIRTIO_BALLOON=m
 CONFIG_VIRTIO_INPUT=y
+CONFIG_VHOST_NET=m
+CONFIG_VHOST_VSOCK=m
 CONFIG_S390_CCW_IOMMU=y
 CONFIG_S390_AP_IOMMU=y
 CONFIG_EXT4_FS=y
@@ -600,6 +611,7 @@ CONFIG_ZISOFS=y
 CONFIG_UDF_FS=m
 CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
+CONFIG_EXFAT_FS=m
 CONFIG_NTFS_FS=m
 CONFIG_NTFS_RW=y
 CONFIG_PROC_KCORE=y
@@ -642,8 +654,8 @@ CONFIG_NLS_UTF8=m
 CONFIG_DLM=m
 CONFIG_UNICODE=y
 CONFIG_PERSISTENT_KEYRINGS=y
-CONFIG_BIG_KEYS=y
 CONFIG_ENCRYPTED_KEYS=m
+CONFIG_KEY_NOTIFICATIONS=y
 CONFIG_SECURITY=y
 CONFIG_SECURITY_NETWORK=y
 CONFIG_SECURITY_SELINUX=y
@@ -667,8 +679,11 @@ CONFIG_CRYPTO_TEST=m
 CONFIG_CRYPTO_DH=m
 CONFIG_CRYPTO_ECDH=m
 CONFIG_CRYPTO_ECRDSA=m
+CONFIG_CRYPTO_CURVE25519=m
+CONFIG_CRYPTO_GCM=y
 CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_AEGIS128=m
+CONFIG_CRYPTO_SEQIV=y
 CONFIG_CRYPTO_CFB=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_OFB=m
@@ -678,6 +693,7 @@ CONFIG_CRYPTO_ADIANTUM=m
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_VMAC=m
 CONFIG_CRYPTO_CRC32=m
+CONFIG_CRYPTO_BLAKE2S=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_RMD128=m
 CONFIG_CRYPTO_RMD160=m
@@ -694,6 +710,7 @@ CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_SALSA20=m
@@ -712,6 +729,9 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 CONFIG_CRYPTO_STATS=y
+CONFIG_CRYPTO_LIB_BLAKE2S=m
+CONFIG_CRYPTO_LIB_CURVE25519=m
+CONFIG_CRYPTO_LIB_CHACHA20POLY1305=m
 CONFIG_ZCRYPT=m
 CONFIG_PKEY=m
 CONFIG_CRYPTO_PAES_S390=m
@@ -725,6 +745,7 @@ CONFIG_CRYPTO_AES_S390=m
 CONFIG_CRYPTO_GHASH_S390=m
 CONFIG_CRYPTO_CRC32_S390=y
 CONFIG_CORDIC=m
+CONFIG_PRIME_NUMBERS=m
 CONFIG_CRC4=m
 CONFIG_CRC7=m
 CONFIG_CRC8=m
@@ -739,10 +760,12 @@ CONFIG_DEBUG_SECTION_MISMATCH=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_MEMORY_INIT=y
 CONFIG_PANIC_ON_OOPS=y
+CONFIG_TEST_LOCKUP=m
 CONFIG_BUG_ON_DATA_CORRUPTION=y
 CONFIG_RCU_TORTURE_TEST=m
 CONFIG_RCU_CPU_STALL_TIMEOUT=60
 CONFIG_LATENCYTOP=y
+CONFIG_BOOTTIME_TRACING=y
 CONFIG_FUNCTION_PROFILER=y
 CONFIG_STACK_TRACER=y
 CONFIG_SCHED_TRACER=y
diff --git a/arch/s390/configs/zfcpdump_defconfig b/arch/s390/configs/zfcpdump_defconfig
index 20c51e5d9353..4091c50449cd 100644
--- a/arch/s390/configs/zfcpdump_defconfig
+++ b/arch/s390/configs/zfcpdump_defconfig
@@ -30,6 +30,7 @@ CONFIG_IBM_PARTITION=y
 # CONFIG_BOUNCE is not set
 CONFIG_NET=y
 # CONFIG_IUCV is not set
+# CONFIG_ETHTOOL_NETLINK is not set
 CONFIG_DEVTMPFS=y
 CONFIG_BLK_DEV_RAM=y
 # CONFIG_BLK_DEV_XPRAM is not set
@@ -55,6 +56,8 @@ CONFIG_RAW_DRIVER=y
 # CONFIG_MONWRITER is not set
 # CONFIG_S390_VMUR is not set
 # CONFIG_HID is not set
+# CONFIG_VIRTIO_MENU is not set
+# CONFIG_VHOST_MENU is not set
 # CONFIG_IOMMU_SUPPORT is not set
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY_USER is not set
@@ -62,7 +65,9 @@ CONFIG_CONFIGFS_FS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
 CONFIG_LSM="yama,loadpin,safesetid,integrity"
+# CONFIG_ZLIB_DFLTCC is not set
 CONFIG_PRINTK_TIME=y
+# CONFIG_SYMBOLIC_ERRNAME is not set
 CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
diff --git a/arch/s390/crypto/prng.c b/arch/s390/crypto/prng.c
index d977643fa627..e1ae23911ccd 100644
--- a/arch/s390/crypto/prng.c
+++ b/arch/s390/crypto/prng.c
@@ -693,7 +693,7 @@ static ssize_t prng_chunksize_show(struct device *dev,
 				   struct device_attribute *attr,
 				   char *buf)
 {
-	return snprintf(buf, PAGE_SIZE, "%u\n", prng_chunk_size);
+	return scnprintf(buf, PAGE_SIZE, "%u\n", prng_chunk_size);
 }
 static DEVICE_ATTR(chunksize, 0444, prng_chunksize_show, NULL);
 
@@ -712,7 +712,7 @@ static ssize_t prng_counter_show(struct device *dev,
 		counter = prng_data->prngws.byte_counter;
 	mutex_unlock(&prng_data->mutex);
 
-	return snprintf(buf, PAGE_SIZE, "%llu\n", counter);
+	return scnprintf(buf, PAGE_SIZE, "%llu\n", counter);
 }
 static DEVICE_ATTR(byte_counter, 0444, prng_counter_show, NULL);
 
@@ -721,7 +721,7 @@ static ssize_t prng_errorflag_show(struct device *dev,
 				   struct device_attribute *attr,
 				   char *buf)
 {
-	return snprintf(buf, PAGE_SIZE, "%d\n", prng_errorflag);
+	return scnprintf(buf, PAGE_SIZE, "%d\n", prng_errorflag);
 }
 static DEVICE_ATTR(errorflag, 0444, prng_errorflag_show, NULL);
 
@@ -731,9 +731,9 @@ static ssize_t prng_mode_show(struct device *dev,
 			      char *buf)
 {
 	if (prng_mode == PRNG_MODE_TDES)
-		return snprintf(buf, PAGE_SIZE, "TDES\n");
+		return scnprintf(buf, PAGE_SIZE, "TDES\n");
 	else
-		return snprintf(buf, PAGE_SIZE, "SHA512\n");
+		return scnprintf(buf, PAGE_SIZE, "SHA512\n");
 }
 static DEVICE_ATTR(mode, 0444, prng_mode_show, NULL);
 
@@ -756,7 +756,7 @@ static ssize_t prng_reseed_limit_show(struct device *dev,
 				      struct device_attribute *attr,
 				      char *buf)
 {
-	return snprintf(buf, PAGE_SIZE, "%u\n", prng_reseed_limit);
+	return scnprintf(buf, PAGE_SIZE, "%u\n", prng_reseed_limit);
 }
 static ssize_t prng_reseed_limit_store(struct device *dev,
 				       struct device_attribute *attr,
@@ -787,7 +787,7 @@ static ssize_t prng_strength_show(struct device *dev,
 				  struct device_attribute *attr,
 				  char *buf)
 {
-	return snprintf(buf, PAGE_SIZE, "256\n");
+	return scnprintf(buf, PAGE_SIZE, "256\n");
 }
 static DEVICE_ATTR(strength, 0444, prng_strength_show, NULL);
 
diff --git a/arch/s390/include/asm/asm-const.h b/arch/s390/include/asm/asm-const.h
new file mode 100644
index 000000000000..11f615eb0066
--- /dev/null
+++ b/arch/s390/include/asm/asm-const.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_S390_ASM_CONST_H
+#define _ASM_S390_ASM_CONST_H
+
+#ifdef __ASSEMBLY__
+#  define stringify_in_c(...)	__VA_ARGS__
+#else
+/* This version of stringify will deal with commas... */
+#  define __stringify_in_c(...)	#__VA_ARGS__
+#  define stringify_in_c(...)	__stringify_in_c(__VA_ARGS__) " "
+#endif
+#endif /* _ASM_S390_ASM_CONST_H */
diff --git a/arch/s390/include/asm/atomic.h b/arch/s390/include/asm/atomic.h
index 491ad53a0d4e..cae473a7b6f7 100644
--- a/arch/s390/include/asm/atomic.h
+++ b/arch/s390/include/asm/atomic.h
@@ -15,8 +15,6 @@
 #include <asm/barrier.h>
 #include <asm/cmpxchg.h>
 
-#define ATOMIC_INIT(i)  { (i) }
-
 static inline int atomic_read(const atomic_t *v)
 {
 	int c;
diff --git a/arch/s390/include/asm/bug.h b/arch/s390/include/asm/bug.h
index 7725f8006fdf..0b25f28351ed 100644
--- a/arch/s390/include/asm/bug.h
+++ b/arch/s390/include/asm/bug.h
@@ -2,7 +2,7 @@
 #ifndef _ASM_S390_BUG_H
 #define _ASM_S390_BUG_H
 
-#include <linux/kernel.h>
+#include <linux/compiler.h>
 
 #ifdef CONFIG_BUG
 
diff --git a/arch/s390/include/asm/debug.h b/arch/s390/include/asm/debug.h
index 310134015541..17a26261f288 100644
--- a/arch/s390/include/asm/debug.h
+++ b/arch/s390/include/asm/debug.h
@@ -12,7 +12,7 @@
 #include <linux/kernel.h>
 #include <linux/time.h>
 #include <linux/refcount.h>
-#include <uapi/asm/debug.h>
+#include <linux/fs.h>
 
 #define DEBUG_MAX_LEVEL		   6  /* debug levels range from 0 to 6 */
 #define DEBUG_OFF_LEVEL		   -1 /* level where debug is switched off */
@@ -26,6 +26,21 @@
 #define DEBUG_DATA(entry) (char *)(entry + 1) /* data is stored behind */
 					      /* the entry information */
 
+#define __DEBUG_FEATURE_VERSION	   2  /* version of debug feature */
+
+struct __debug_entry {
+	union {
+		struct {
+			unsigned long clock	: 52;
+			unsigned long exception	:  1;
+			unsigned long level	:  3;
+			unsigned long cpuid	:  8;
+		} fields;
+		unsigned long stck;
+	} id;
+	void *caller;
+} __packed;
+
 typedef struct __debug_entry debug_entry_t;
 
 struct debug_view;
@@ -82,7 +97,6 @@ struct debug_view {
 };
 
 extern struct debug_view debug_hex_ascii_view;
-extern struct debug_view debug_raw_view;
 extern struct debug_view debug_sprintf_view;
 
 /* do NOT use the _common functions */
diff --git a/arch/s390/include/asm/extable.h b/arch/s390/include/asm/extable.h
index ae27f756b409..3beb294fd553 100644
--- a/arch/s390/include/asm/extable.h
+++ b/arch/s390/include/asm/extable.h
@@ -1,12 +1,20 @@
 /* SPDX-License-Identifier: GPL-2.0 */
 #ifndef __S390_EXTABLE_H
 #define __S390_EXTABLE_H
+
+#include <asm/ptrace.h>
+#include <linux/compiler.h>
+
 /*
- * The exception table consists of pairs of addresses: the first is the
- * address of an instruction that is allowed to fault, and the second is
- * the address at which the program should continue.  No registers are
- * modified, so it is entirely up to the continuation code to figure out
- * what to do.
+ * The exception table consists of three addresses:
+ *
+ * - Address of an instruction that is allowed to fault.
+ * - Address at which the program should continue.
+ * - Optional address of handler that takes pt_regs * argument and runs in
+ *   interrupt context.
+ *
+ * No registers are modified, so it is entirely up to the continuation code
+ * to figure out what to do.
  *
  * All the routines below use bits of fixup code that are out of line
  * with the main instruction path.  This means when everything is well,
@@ -17,6 +25,7 @@
 struct exception_table_entry
 {
 	int insn, fixup;
+	long handler;
 };
 
 extern struct exception_table_entry *__start_dma_ex_table;
@@ -29,6 +38,39 @@ static inline unsigned long extable_fixup(const struct exception_table_entry *x)
 	return (unsigned long)&x->fixup + x->fixup;
 }
 
+typedef bool (*ex_handler_t)(const struct exception_table_entry *,
+			     struct pt_regs *);
+
+static inline ex_handler_t
+ex_fixup_handler(const struct exception_table_entry *x)
+{
+	if (likely(!x->handler))
+		return NULL;
+	return (ex_handler_t)((unsigned long)&x->handler + x->handler);
+}
+
+static inline bool ex_handle(const struct exception_table_entry *x,
+			     struct pt_regs *regs)
+{
+	ex_handler_t handler = ex_fixup_handler(x);
+
+	if (unlikely(handler))
+		return handler(x, regs);
+	regs->psw.addr = extable_fixup(x);
+	return true;
+}
+
 #define ARCH_HAS_RELATIVE_EXTABLE
 
+static inline void swap_ex_entry_fixup(struct exception_table_entry *a,
+				       struct exception_table_entry *b,
+				       struct exception_table_entry tmp,
+				       int delta)
+{
+	a->fixup = b->fixup + delta;
+	b->fixup = tmp.fixup - delta;
+	a->handler = b->handler + delta;
+	b->handler = tmp.handler - delta;
+}
+
 #endif
diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h
index cee3cb6455a2..6ea0820e7c7f 100644
--- a/arch/s390/include/asm/kvm_host.h
+++ b/arch/s390/include/asm/kvm_host.h
@@ -31,12 +31,12 @@
 #define KVM_USER_MEM_SLOTS 32
 
 /*
- * These seem to be used for allocating ->chip in the routing table,
- * which we don't use. 4096 is an out-of-thin-air value. If we need
- * to look at ->chip later on, we'll need to revisit this.
+ * These seem to be used for allocating ->chip in the routing table, which we
+ * don't use. 1 is as small as we can get to reduce the needed memory. If we
+ * need to look at ->chip later on, we'll need to revisit this.
  */
 #define KVM_NR_IRQCHIPS 1
-#define KVM_IRQCHIP_NUM_PINS 4096
+#define KVM_IRQCHIP_NUM_PINS 1
 #define KVM_HALT_POLL_NS_DEFAULT 50000
 
 /* s390-specific vcpu->requests bit members */
diff --git a/arch/s390/include/asm/linkage.h b/arch/s390/include/asm/linkage.h
index 7f22262b0e46..a0a7a2c72bd4 100644
--- a/arch/s390/include/asm/linkage.h
+++ b/arch/s390/include/asm/linkage.h
@@ -2,38 +2,27 @@
 #ifndef __ASM_LINKAGE_H
 #define __ASM_LINKAGE_H
 
+#include <asm/asm-const.h>
 #include <linux/stringify.h>
 
 #define __ALIGN .align 4, 0x07
 #define __ALIGN_STR __stringify(__ALIGN)
 
-#ifndef __ASSEMBLY__
-
 /*
  * Helper macro for exception table entries
  */
-#define EX_TABLE(_fault, _target)	\
-	".section __ex_table,\"a\"\n"	\
-	".align	4\n"			\
-	".long	(" #_fault ") - .\n"	\
-	".long	(" #_target ") - .\n"	\
-	".previous\n"
-
-#else /* __ASSEMBLY__ */
 
-#define EX_TABLE(_fault, _target)	\
-	.section __ex_table,"a"	;	\
-	.align	4 ;			\
-	.long	(_fault) - . ;		\
-	.long	(_target) - . ;		\
-	.previous
+#define __EX_TABLE(_section, _fault, _target)				\
+	stringify_in_c(.section	_section,"a";)				\
+	stringify_in_c(.align	8;)					\
+	stringify_in_c(.long	(_fault) - .;)				\
+	stringify_in_c(.long	(_target) - .;)				\
+	stringify_in_c(.quad	0;)					\
+	stringify_in_c(.previous)
 
-#define EX_TABLE_DMA(_fault, _target)	\
-	.section .dma.ex_table, "a" ;	\
-	.align	4 ;			\
-	.long	(_fault) - . ;		\
-	.long	(_target) - . ;		\
-	.previous
+#define EX_TABLE(_fault, _target)					\
+	__EX_TABLE(__ex_table, _fault, _target)
+#define EX_TABLE_DMA(_fault, _target)					\
+	__EX_TABLE(.dma.ex_table, _fault, _target)
 
-#endif /* __ASSEMBLY__ */
 #endif
diff --git a/arch/s390/include/asm/pci_dma.h b/arch/s390/include/asm/pci_dma.h
index 419fac7a62c0..f62cd3ed2d44 100644
--- a/arch/s390/include/asm/pci_dma.h
+++ b/arch/s390/include/asm/pci_dma.h
@@ -131,12 +131,6 @@ static inline void validate_st_entry(unsigned long *entry)
 	*entry |= ZPCI_TABLE_VALID;
 }
 
-static inline void invalidate_table_entry(unsigned long *entry)
-{
-	*entry &= ~ZPCI_TABLE_VALID_MASK;
-	*entry |= ZPCI_TABLE_INVALID;
-}
-
 static inline void invalidate_pt_entry(unsigned long *entry)
 {
 	WARN_ON_ONCE((*entry & ZPCI_PTE_VALID_MASK) == ZPCI_PTE_INVALID);
@@ -173,11 +167,6 @@ static inline int pt_entry_isvalid(unsigned long entry)
 	return (entry & ZPCI_PTE_VALID_MASK) == ZPCI_PTE_VALID;
 }
 
-static inline int entry_isprotected(unsigned long entry)
-{
-	return (entry & ZPCI_TABLE_PROT_MASK) == ZPCI_TABLE_PROTECTED;
-}
-
 static inline unsigned long *get_rt_sto(unsigned long entry)
 {
 	return ((entry & ZPCI_TABLE_TYPE_MASK) == ZPCI_TABLE_TYPE_RTX)
diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h
index 19d603bd1f36..7eb01a5459cd 100644
--- a/arch/s390/include/asm/pgtable.h
+++ b/arch/s390/include/asm/pgtable.h
@@ -1669,7 +1669,7 @@ static inline swp_entry_t __swp_entry(unsigned long type, unsigned long offset)
 #define kern_addr_valid(addr)   (1)
 
 extern int vmem_add_mapping(unsigned long start, unsigned long size);
-extern int vmem_remove_mapping(unsigned long start, unsigned long size);
+extern void vmem_remove_mapping(unsigned long start, unsigned long size);
 extern int s390_enable_sie(void);
 extern int s390_enable_skey(void);
 extern void s390_reset_cmma(struct mm_struct *mm);
diff --git a/arch/s390/include/asm/ptrace.h b/arch/s390/include/asm/ptrace.h
index f009a13afe71..16b3e4396312 100644
--- a/arch/s390/include/asm/ptrace.h
+++ b/arch/s390/include/asm/ptrace.h
@@ -184,5 +184,10 @@ static inline unsigned long kernel_stack_pointer(struct pt_regs *regs)
 	return regs->gprs[15];
 }
 
+static inline void regs_set_return_value(struct pt_regs *regs, unsigned long rc)
+{
+	regs->gprs[2] = rc;
+}
+
 #endif /* __ASSEMBLY__ */
 #endif /* _S390_PTRACE_H */
diff --git a/arch/s390/include/asm/smp.h b/arch/s390/include/asm/smp.h
index 7326f110d48c..7e155fb6c254 100644
--- a/arch/s390/include/asm/smp.h
+++ b/arch/s390/include/asm/smp.h
@@ -10,6 +10,7 @@
 
 #include <asm/sigp.h>
 #include <asm/lowcore.h>
+#include <asm/processor.h>
 
 #define raw_smp_processor_id()	(S390_lowcore.cpu_nr)
 
@@ -54,6 +55,10 @@ static inline int smp_get_base_cpu(int cpu)
 	return cpu - (cpu % (smp_cpu_mtid + 1));
 }
 
+static inline void smp_cpus_done(unsigned int max_cpus)
+{
+}
+
 extern int smp_rescan_cpus(void);
 extern void __noreturn cpu_die(void);
 extern void __cpu_die(unsigned int cpu);
diff --git a/arch/s390/include/asm/syscall.h b/arch/s390/include/asm/syscall.h
index f073292e9fdb..d9d5de0f67ff 100644
--- a/arch/s390/include/asm/syscall.h
+++ b/arch/s390/include/asm/syscall.h
@@ -33,7 +33,17 @@ static inline void syscall_rollback(struct task_struct *task,
 static inline long syscall_get_error(struct task_struct *task,
 				     struct pt_regs *regs)
 {
-	return IS_ERR_VALUE(regs->gprs[2]) ? regs->gprs[2] : 0;
+	unsigned long error = regs->gprs[2];
+#ifdef CONFIG_COMPAT
+	if (test_tsk_thread_flag(task, TIF_31BIT)) {
+		/*
+		 * Sign-extend the value so (int)-EFOO becomes (long)-EFOO
+		 * and will match correctly in comparisons.
+		 */
+		error = (long)(int)error;
+	}
+#endif
+	return IS_ERR_VALUE(error) ? error : 0;
 }
 
 static inline long syscall_get_return_value(struct task_struct *task,
diff --git a/arch/s390/include/asm/syscall_wrapper.h b/arch/s390/include/asm/syscall_wrapper.h
index 3c3d6fe8e2f0..1320f4213d80 100644
--- a/arch/s390/include/asm/syscall_wrapper.h
+++ b/arch/s390/include/asm/syscall_wrapper.h
@@ -30,7 +30,7 @@
 })
 
 #define __S390_SYS_STUBx(x, name, ...)					\
-	asmlinkage long __s390_sys##name(__MAP(x,__SC_LONG,__VA_ARGS__))\
+	asmlinkage long __s390_sys##name(__MAP(x,__SC_LONG,__VA_ARGS__));\
 	ALLOW_ERROR_INJECTION(__s390_sys##name, ERRNO);			\
 	asmlinkage long __s390_sys##name(__MAP(x,__SC_LONG,__VA_ARGS__))\
 	{								\
@@ -46,7 +46,7 @@
 #define COMPAT_SYSCALL_DEFINE0(sname)					\
 	SYSCALL_METADATA(_##sname, 0);					\
 	asmlinkage long __s390_compat_sys_##sname(void);		\
-	ALLOW_ERROR_INJECTION(__s390_compat__sys_##sname, ERRNO);	\
+	ALLOW_ERROR_INJECTION(__s390_compat_sys_##sname, ERRNO);	\
 	asmlinkage long __s390_compat_sys_##sname(void)
 
 #define SYSCALL_DEFINE0(sname)						\
@@ -72,7 +72,7 @@
 	asmlinkage long __s390_compat_sys##name(__MAP(x,__SC_DECL,__VA_ARGS__));	\
 	asmlinkage long __s390_compat_sys##name(__MAP(x,__SC_DECL,__VA_ARGS__))	\
 		__attribute__((alias(__stringify(__se_compat_sys##name))));	\
-	ALLOW_ERROR_INJECTION(compat_sys##name, ERRNO);				\
+	ALLOW_ERROR_INJECTION(__s390_compat_sys##name, ERRNO);			\
 	static inline long __do_compat_sys##name(__MAP(x,__SC_DECL,__VA_ARGS__));\
 	asmlinkage long __se_compat_sys##name(__MAP(x,__SC_LONG,__VA_ARGS__));	\
 	asmlinkage long __se_compat_sys##name(__MAP(x,__SC_LONG,__VA_ARGS__))	\
diff --git a/arch/s390/include/asm/thread_info.h b/arch/s390/include/asm/thread_info.h
index e582fbe59e20..13a04fcf7762 100644
--- a/arch/s390/include/asm/thread_info.h
+++ b/arch/s390/include/asm/thread_info.h
@@ -24,7 +24,6 @@
 #ifndef __ASSEMBLY__
 #include <asm/lowcore.h>
 #include <asm/page.h>
-#include <asm/processor.h>
 
 #define STACK_INIT_OFFSET \
 	(THREAD_SIZE - STACK_FRAME_OVERHEAD - sizeof(struct pt_regs))
diff --git a/arch/s390/include/asm/timex.h b/arch/s390/include/asm/timex.h
index 6bf3a45ccfec..289aaff4d365 100644
--- a/arch/s390/include/asm/timex.h
+++ b/arch/s390/include/asm/timex.h
@@ -49,11 +49,6 @@ static inline void set_clock_comparator(__u64 time)
 	asm volatile("sckc %0" : : "Q" (time));
 }
 
-static inline void store_clock_comparator(__u64 *time)
-{
-	asm volatile("stckc %0" : "=Q" (*time));
-}
-
 void clock_comparator_work(void);
 
 void __init time_early_init(void);
diff --git a/arch/s390/include/asm/vdso.h b/arch/s390/include/asm/vdso.h
index 3bcfdeb01395..0cd085cdeb4f 100644
--- a/arch/s390/include/asm/vdso.h
+++ b/arch/s390/include/asm/vdso.h
@@ -36,6 +36,7 @@ struct vdso_data {
 	__u32 tk_shift;			/* Shift used for xtime_nsec	0x60 */
 	__u32 ts_dir;			/* TOD steering direction	0x64 */
 	__u64 ts_end;			/* TOD steering end		0x68 */
+	__u32 hrtimer_res;		/* hrtimer resolution		0x70 */
 };
 
 struct vdso_per_cpu_data {
diff --git a/arch/s390/include/uapi/asm/debug.h b/arch/s390/include/uapi/asm/debug.h
deleted file mode 100644
index c7c564d9aea4..000000000000
--- a/arch/s390/include/uapi/asm/debug.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-/*
- *   S/390 debug facility
- *
- *    Copyright IBM Corp. 1999, 2000
- */
-
-#ifndef _UAPIDEBUG_H
-#define _UAPIDEBUG_H
-
-#include <linux/fs.h>
-
-/* Note:
- * struct __debug_entry must be defined outside of #ifdef __KERNEL__ 
- * in order to allow a user program to analyze the 'raw'-view.
- */
-
-struct __debug_entry{
-        union {
-                struct {
-                        unsigned long long clock:52;
-                        unsigned long long exception:1;
-                        unsigned long long level:3;
-                        unsigned long long cpuid:8;
-                } fields;
-
-                unsigned long long stck;
-        } id;
-        void* caller;
-} __attribute__((packed));
-
-
-#define __DEBUG_FEATURE_VERSION      2  /* version of debug feature */
-
-#endif /* _UAPIDEBUG_H */
diff --git a/arch/s390/include/uapi/asm/zcrypt.h b/arch/s390/include/uapi/asm/zcrypt.h
index 5a2177e96e88..22fd202856bc 100644
--- a/arch/s390/include/uapi/asm/zcrypt.h
+++ b/arch/s390/include/uapi/asm/zcrypt.h
@@ -36,12 +36,12 @@
  * - length(n_modulus) = inputdatalength
  */
 struct ica_rsa_modexpo {
-	char __user  *inputdata;
-	unsigned int  inputdatalength;
-	char __user  *outputdata;
-	unsigned int  outputdatalength;
-	char __user  *b_key;
-	char __user  *n_modulus;
+	__u8 __user  *inputdata;
+	__u32	      inputdatalength;
+	__u8 __user  *outputdata;
+	__u32	      outputdatalength;
+	__u8 __user  *b_key;
+	__u8 __user  *n_modulus;
 };
 
 /**
@@ -59,15 +59,15 @@ struct ica_rsa_modexpo {
  * - length(u_mult_inv) = inputdatalength/2 + 8
  */
 struct ica_rsa_modexpo_crt {
-	char __user  *inputdata;
-	unsigned int  inputdatalength;
-	char __user  *outputdata;
-	unsigned int  outputdatalength;
-	char __user  *bp_key;
-	char __user  *bq_key;
-	char __user  *np_prime;
-	char __user  *nq_prime;
-	char __user  *u_mult_inv;
+	__u8 __user  *inputdata;
+	__u32	      inputdatalength;
+	__u8 __user  *outputdata;
+	__u32	      outputdatalength;
+	__u8 __user  *bp_key;
+	__u8 __user  *bq_key;
+	__u8 __user  *np_prime;
+	__u8 __user  *nq_prime;
+	__u8 __user  *u_mult_inv;
 };
 
 /**
@@ -83,67 +83,67 @@ struct ica_rsa_modexpo_crt {
  *	    key block
  */
 struct CPRBX {
-	unsigned short	cprb_len;	/* CPRB length	      220	 */
-	unsigned char	cprb_ver_id;	/* CPRB version id.   0x02	 */
-	unsigned char	pad_000[3];	/* Alignment pad bytes		 */
-	unsigned char	func_id[2];	/* function id	      0x5432	 */
-	unsigned char	cprb_flags[4];	/* Flags			 */
-	unsigned int	req_parml;	/* request parameter buffer len	 */
-	unsigned int	req_datal;	/* request data buffer		 */
-	unsigned int	rpl_msgbl;	/* reply  message block length	 */
-	unsigned int	rpld_parml;	/* replied parameter block len	 */
-	unsigned int	rpl_datal;	/* reply data block len		 */
-	unsigned int	rpld_datal;	/* replied data block len	 */
-	unsigned int	req_extbl;	/* request extension block len	 */
-	unsigned char	pad_001[4];	/* reserved			 */
-	unsigned int	rpld_extbl;	/* replied extension block len	 */
-	unsigned char	padx000[16 - sizeof(char *)];
-	unsigned char  *req_parmb;	/* request parm block 'address'	 */
-	unsigned char	padx001[16 - sizeof(char *)];
-	unsigned char  *req_datab;	/* request data block 'address'	 */
-	unsigned char	padx002[16 - sizeof(char *)];
-	unsigned char  *rpl_parmb;	/* reply parm block 'address'	 */
-	unsigned char	padx003[16 - sizeof(char *)];
-	unsigned char  *rpl_datab;	/* reply data block 'address'	 */
-	unsigned char	padx004[16 - sizeof(char *)];
-	unsigned char  *req_extb;	/* request extension block 'addr'*/
-	unsigned char	padx005[16 - sizeof(char *)];
-	unsigned char  *rpl_extb;	/* reply extension block 'address'*/
-	unsigned short	ccp_rtcode;	/* server return code		 */
-	unsigned short	ccp_rscode;	/* server reason code		 */
-	unsigned int	mac_data_len;	/* Mac Data Length		 */
-	unsigned char	logon_id[8];	/* Logon Identifier		 */
-	unsigned char	mac_value[8];	/* Mac Value			 */
-	unsigned char	mac_content_flgs;/* Mac content flag byte	 */
-	unsigned char	pad_002;	/* Alignment			 */
-	unsigned short	domain;		/* Domain			 */
-	unsigned char	usage_domain[4];/* Usage domain			 */
-	unsigned char	cntrl_domain[4];/* Control domain		 */
-	unsigned char	S390enf_mask[4];/* S/390 enforcement mask	 */
-	unsigned char	pad_004[36];	/* reserved			 */
+	__u16	     cprb_len;		/* CPRB length	      220	 */
+	__u8	     cprb_ver_id;	/* CPRB version id.   0x02	 */
+	__u8	     pad_000[3];	/* Alignment pad bytes		 */
+	__u8	     func_id[2];	/* function id	      0x5432	 */
+	__u8	     cprb_flags[4];	/* Flags			 */
+	__u32	     req_parml;		/* request parameter buffer len	 */
+	__u32	     req_datal;		/* request data buffer		 */
+	__u32	     rpl_msgbl;		/* reply  message block length	 */
+	__u32	     rpld_parml;	/* replied parameter block len	 */
+	__u32	     rpl_datal;		/* reply data block len		 */
+	__u32	     rpld_datal;	/* replied data block len	 */
+	__u32	     req_extbl;		/* request extension block len	 */
+	__u8	     pad_001[4];	/* reserved			 */
+	__u32	     rpld_extbl;	/* replied extension block len	 */
+	__u8	     padx000[16 - sizeof(__u8 *)];
+	__u8 __user *req_parmb;		/* request parm block 'address'	 */
+	__u8	     padx001[16 - sizeof(__u8 *)];
+	__u8 __user *req_datab;		/* request data block 'address'	 */
+	__u8	     padx002[16 - sizeof(__u8 *)];
+	__u8 __user *rpl_parmb;		/* reply parm block 'address'	 */
+	__u8	     padx003[16 - sizeof(__u8 *)];
+	__u8 __user *rpl_datab;		/* reply data block 'address'	 */
+	__u8	     padx004[16 - sizeof(__u8 *)];
+	__u8 __user *req_extb;		/* request extension block 'addr'*/
+	__u8	     padx005[16 - sizeof(__u8 *)];
+	__u8 __user *rpl_extb;		/* reply extension block 'address'*/
+	__u16	     ccp_rtcode;	/* server return code		 */
+	__u16	     ccp_rscode;	/* server reason code		 */
+	__u32	     mac_data_len;	/* Mac Data Length		 */
+	__u8	     logon_id[8];	/* Logon Identifier		 */
+	__u8	     mac_value[8];	/* Mac Value			 */
+	__u8	     mac_content_flgs;	/* Mac content flag byte	 */
+	__u8	     pad_002;		/* Alignment			 */
+	__u16	     domain;		/* Domain			 */
+	__u8	     usage_domain[4];	/* Usage domain			 */
+	__u8	     cntrl_domain[4];	/* Control domain		 */
+	__u8	     S390enf_mask[4];	/* S/390 enforcement mask	 */
+	__u8	     pad_004[36];	/* reserved			 */
 } __attribute__((packed));
 
 /**
  * xcRB
  */
 struct ica_xcRB {
-	unsigned short	agent_ID;
-	unsigned int	user_defined;
-	unsigned short	request_ID;
-	unsigned int	request_control_blk_length;
-	unsigned char	padding1[16 - sizeof(char *)];
-	char __user    *request_control_blk_addr;
-	unsigned int	request_data_length;
-	char		padding2[16 - sizeof(char *)];
-	char __user    *request_data_address;
-	unsigned int	reply_control_blk_length;
-	char		padding3[16 - sizeof(char *)];
-	char __user    *reply_control_blk_addr;
-	unsigned int	reply_data_length;
-	char		padding4[16 - sizeof(char *)];
-	char __user    *reply_data_addr;
-	unsigned short	priority_window;
-	unsigned int	status;
+	__u16	      agent_ID;
+	__u32	      user_defined;
+	__u16	      request_ID;
+	__u32	      request_control_blk_length;
+	__u8	      _padding1[16 - sizeof(__u8 *)];
+	__u8 __user  *request_control_blk_addr;
+	__u32	      request_data_length;
+	__u8	      _padding2[16 - sizeof(__u8 *)];
+	__u8 __user  *request_data_address;
+	__u32	      reply_control_blk_length;
+	__u8	      _padding3[16 - sizeof(__u8 *)];
+	__u8 __user  *reply_control_blk_addr;
+	__u32	      reply_data_length;
+	__u8	      __padding4[16 - sizeof(__u8 *)];
+	__u8 __user  *reply_data_addr;
+	__u16	      priority_window;
+	__u32	      status;
 } __attribute__((packed));
 
 /**
diff --git a/arch/s390/kernel/asm-offsets.c b/arch/s390/kernel/asm-offsets.c
index 165031bd3370..5d8cc1864566 100644
--- a/arch/s390/kernel/asm-offsets.c
+++ b/arch/s390/kernel/asm-offsets.c
@@ -76,6 +76,7 @@ int main(void)
 	OFFSET(__VDSO_TK_SHIFT, vdso_data, tk_shift);
 	OFFSET(__VDSO_TS_DIR, vdso_data, ts_dir);
 	OFFSET(__VDSO_TS_END, vdso_data, ts_end);
+	OFFSET(__VDSO_CLOCK_REALTIME_RES, vdso_data, hrtimer_res);
 	OFFSET(__VDSO_ECTG_BASE, vdso_per_cpu_data, ectg_timer_base);
 	OFFSET(__VDSO_ECTG_USER, vdso_per_cpu_data, ectg_user_time);
 	OFFSET(__VDSO_GETCPU_VAL, vdso_per_cpu_data, getcpu_val);
@@ -86,7 +87,6 @@ int main(void)
 	DEFINE(__CLOCK_REALTIME_COARSE, CLOCK_REALTIME_COARSE);
 	DEFINE(__CLOCK_MONOTONIC_COARSE, CLOCK_MONOTONIC_COARSE);
 	DEFINE(__CLOCK_THREAD_CPUTIME_ID, CLOCK_THREAD_CPUTIME_ID);
-	DEFINE(__CLOCK_REALTIME_RES, MONOTONIC_RES_NSEC);
 	DEFINE(__CLOCK_COARSE_RES, LOW_RES_NSEC);
 	BLANK();
 	/* idle data offsets */
diff --git a/arch/s390/kernel/crash_dump.c b/arch/s390/kernel/crash_dump.c
index f96a5857bbfd..c42ce348103c 100644
--- a/arch/s390/kernel/crash_dump.c
+++ b/arch/s390/kernel/crash_dump.c
@@ -549,8 +549,7 @@ static int get_mem_chunk_cnt(void)
 	int cnt = 0;
 	u64 idx;
 
-	for_each_mem_range(idx, &memblock.physmem, &oldmem_type, NUMA_NO_NODE,
-			   MEMBLOCK_NONE, NULL, NULL, NULL)
+	for_each_physmem_range(idx, &oldmem_type, NULL, NULL)
 		cnt++;
 	return cnt;
 }
@@ -563,8 +562,7 @@ static void loads_init(Elf64_Phdr *phdr, u64 loads_offset)
 	phys_addr_t start, end;
 	u64 idx;
 
-	for_each_mem_range(idx, &memblock.physmem, &oldmem_type, NUMA_NO_NODE,
-			   MEMBLOCK_NONE, &start, &end, NULL) {
+	for_each_physmem_range(idx, &oldmem_type, &start, &end) {
 		phdr->p_filesz = end - start;
 		phdr->p_type = PT_LOAD;
 		phdr->p_offset = start;
diff --git a/arch/s390/kernel/debug.c b/arch/s390/kernel/debug.c
index 636446003a06..beb4b44a11d1 100644
--- a/arch/s390/kernel/debug.c
+++ b/arch/s390/kernel/debug.c
@@ -90,27 +90,11 @@ static int debug_input_flush_fn(debug_info_t *id, struct debug_view *view,
 				size_t user_buf_size, loff_t *offset);
 static int debug_hex_ascii_format_fn(debug_info_t *id, struct debug_view *view,
 				     char *out_buf, const char *in_buf);
-static int debug_raw_format_fn(debug_info_t *id,
-			       struct debug_view *view, char *out_buf,
-			       const char *in_buf);
-static int debug_raw_header_fn(debug_info_t *id, struct debug_view *view,
-			       int area, debug_entry_t *entry, char *out_buf);
-
 static int debug_sprintf_format_fn(debug_info_t *id, struct debug_view *view,
 				   char *out_buf, debug_sprintf_entry_t *curr_event);
 
 /* globals */
 
-struct debug_view debug_raw_view = {
-	"raw",
-	NULL,
-	&debug_raw_header_fn,
-	&debug_raw_format_fn,
-	NULL,
-	NULL
-};
-EXPORT_SYMBOL(debug_raw_view);
-
 struct debug_view debug_hex_ascii_view = {
 	"hex_ascii",
 	NULL,
@@ -198,9 +182,10 @@ static debug_entry_t ***debug_areas_alloc(int pages_per_area, int nr_areas)
 	if (!areas)
 		goto fail_malloc_areas;
 	for (i = 0; i < nr_areas; i++) {
+		/* GFP_NOWARN to avoid user triggerable WARN, we handle fails */
 		areas[i] = kmalloc_array(pages_per_area,
 					 sizeof(debug_entry_t *),
-					 GFP_KERNEL);
+					 GFP_KERNEL | __GFP_NOWARN);
 		if (!areas[i])
 			goto fail_malloc_areas2;
 		for (j = 0; j < pages_per_area; j++) {
@@ -1385,32 +1370,6 @@ out:
 }
 
 /*
- * prints debug header in raw format
- */
-static int debug_raw_header_fn(debug_info_t *id, struct debug_view *view,
-			       int area, debug_entry_t *entry, char *out_buf)
-{
-	int rc;
-
-	rc = sizeof(debug_entry_t);
-	memcpy(out_buf, entry, sizeof(debug_entry_t));
-	return rc;
-}
-
-/*
- * prints debug data in raw format
- */
-static int debug_raw_format_fn(debug_info_t *id, struct debug_view *view,
-			       char *out_buf, const char *in_buf)
-{
-	int rc;
-
-	rc = id->buf_size;
-	memcpy(out_buf, in_buf, id->buf_size);
-	return rc;
-}
-
-/*
  * prints debug data in hex/ascii format
  */
 static int debug_hex_ascii_format_fn(debug_info_t *id, struct debug_view *view,
diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c
index cd241ee66eff..078277231858 100644
--- a/arch/s390/kernel/early.c
+++ b/arch/s390/kernel/early.c
@@ -170,6 +170,8 @@ static noinline __init void setup_lowcore_early(void)
 	psw_t psw;
 
 	psw.mask = PSW_MASK_BASE | PSW_DEFAULT_KEY | PSW_MASK_EA | PSW_MASK_BA;
+	if (IS_ENABLED(CONFIG_KASAN))
+		psw.mask |= PSW_MASK_DAT;
 	psw.addr = (unsigned long) s390_base_ext_handler;
 	S390_lowcore.external_new_psw = psw;
 	psw.addr = (unsigned long) s390_base_pgm_handler;
diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S
index 50ff6dd0f995..23edf196d3dc 100644
--- a/arch/s390/kernel/entry.S
+++ b/arch/s390/kernel/entry.S
@@ -370,7 +370,7 @@ EXPORT_SYMBOL(sie_exit)
 
 /*
  * SVC interrupt handler routine. System calls are synchronous events and
- * are executed with interrupts enabled.
+ * are entered with interrupts disabled.
  */
 
 ENTRY(system_call)
@@ -378,9 +378,9 @@ ENTRY(system_call)
 	stmg	%r8,%r15,__LC_SAVE_AREA_SYNC
 	BPOFF
 	lg	%r12,__LC_CURRENT
-	lghi	%r13,__TASK_thread
 	lghi	%r14,_PIF_SYSCALL
 .Lsysc_per:
+	lghi	%r13,__TASK_thread
 	lg	%r15,__LC_KERNEL_STACK
 	la	%r11,STACK_FRAME_OVERHEAD(%r15)	# pointer to pt_regs
 	UPDATE_VTIME %r8,%r9,__LC_SYNC_ENTER_TIMER
@@ -401,9 +401,9 @@ ENTRY(system_call)
 	jnz	.Lsysc_nr_ok
 	# svc 0: system call number in %r1
 	llgfr	%r1,%r1				# clear high word in r1
+	sth	%r1,__PT_INT_CODE+2(%r11)
 	cghi	%r1,NR_syscalls
 	jnl	.Lsysc_nr_ok
-	sth	%r1,__PT_INT_CODE+2(%r11)
 	slag	%r8,%r1,3
 .Lsysc_nr_ok:
 	xc	__SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
diff --git a/arch/s390/kernel/ftrace.c b/arch/s390/kernel/ftrace.c
index 44e01dd1e624..b388e87a08bf 100644
--- a/arch/s390/kernel/ftrace.c
+++ b/arch/s390/kernel/ftrace.c
@@ -83,7 +83,7 @@ int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec,
 {
 	struct ftrace_insn orig, new, old;
 
-	if (probe_kernel_read(&old, (void *) rec->ip, sizeof(old)))
+	if (copy_from_kernel_nofault(&old, (void *) rec->ip, sizeof(old)))
 		return -EFAULT;
 	if (addr == MCOUNT_ADDR) {
 		/* Initial code replacement */
@@ -105,7 +105,7 @@ int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
 {
 	struct ftrace_insn orig, new, old;
 
-	if (probe_kernel_read(&old, (void *) rec->ip, sizeof(old)))
+	if (copy_from_kernel_nofault(&old, (void *) rec->ip, sizeof(old)))
 		return -EFAULT;
 	/* Replace nop with an ftrace call. */
 	ftrace_generate_nop_insn(&orig);
diff --git a/arch/s390/kernel/idle.c b/arch/s390/kernel/idle.c
index 0d7fbdfe995a..88bb42ca5008 100644
--- a/arch/s390/kernel/idle.c
+++ b/arch/s390/kernel/idle.c
@@ -14,6 +14,7 @@
 #include <linux/init.h>
 #include <linux/cpu.h>
 #include <linux/sched/cputime.h>
+#include <trace/events/power.h>
 #include <asm/nmi.h>
 #include <asm/smp.h>
 #include "entry.h"
@@ -32,11 +33,12 @@ void enabled_wait(void)
 		PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK;
 	clear_cpu_flag(CIF_NOHZ_DELAY);
 
+	trace_cpu_idle_rcuidle(1, smp_processor_id());
 	local_irq_save(flags);
 	/* Call the assembler magic in entry.S */
 	psw_idle(idle, psw_mask);
 	local_irq_restore(flags);
-
+	trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, smp_processor_id());
 
 	/* Account time spent with enabled wait psw loaded as idle time. */
 	write_seqcount_begin(&idle->seqcount);
diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c
index ccea9a245867..90a2a17239b0 100644
--- a/arch/s390/kernel/ipl.c
+++ b/arch/s390/kernel/ipl.c
@@ -181,7 +181,7 @@ static ssize_t sys_##_prefix##_##_name##_show(struct kobject *kobj,	\
 		struct kobj_attribute *attr,				\
 		char *page)						\
 {									\
-	return snprintf(page, PAGE_SIZE, _format, ##args);		\
+	return scnprintf(page, PAGE_SIZE, _format, ##args);		\
 }
 
 #define IPL_ATTR_CCW_STORE_FN(_prefix, _name, _ipl_blk)			\
diff --git a/arch/s390/kernel/kprobes.c b/arch/s390/kernel/kprobes.c
index 548d0ea9808d..d2a71d872638 100644
--- a/arch/s390/kernel/kprobes.c
+++ b/arch/s390/kernel/kprobes.c
@@ -523,10 +523,8 @@ static int kprobe_trap_handler(struct pt_regs *regs, int trapnr)
 		 * zero, try to fix up.
 		 */
 		entry = s390_search_extables(regs->psw.addr);
-		if (entry) {
-			regs->psw.addr = extable_fixup(entry);
+		if (entry && ex_handle(entry, regs))
 			return 1;
-		}
 
 		/*
 		 * fixup_exception() could not handle it,
diff --git a/arch/s390/kernel/lgr.c b/arch/s390/kernel/lgr.c
index 452502f9a0d9..3b895971c3d0 100644
--- a/arch/s390/kernel/lgr.c
+++ b/arch/s390/kernel/lgr.c
@@ -167,7 +167,7 @@ static struct timer_list lgr_timer;
  */
 static void lgr_timer_set(void)
 {
-	mod_timer(&lgr_timer, jiffies + LGR_TIMER_INTERVAL_SECS * HZ);
+	mod_timer(&lgr_timer, jiffies + msecs_to_jiffies(LGR_TIMER_INTERVAL_SECS * MSEC_PER_SEC));
 }
 
 /*
diff --git a/arch/s390/kernel/perf_cpum_cf_events.c b/arch/s390/kernel/perf_cpum_cf_events.c
index 1e3df52b2b65..37265f551a11 100644
--- a/arch/s390/kernel/perf_cpum_cf_events.c
+++ b/arch/s390/kernel/perf_cpum_cf_events.c
@@ -292,7 +292,7 @@ CPUMF_EVENT_ATTR(cf_z15, TX_C_TABORT_SPECIAL, 0x00f5);
 CPUMF_EVENT_ATTR(cf_z15, DFLT_ACCESS, 0x00f7);
 CPUMF_EVENT_ATTR(cf_z15, DFLT_CYCLES, 0x00fc);
 CPUMF_EVENT_ATTR(cf_z15, DFLT_CC, 0x00108);
-CPUMF_EVENT_ATTR(cf_z15, DFLT_CCERROR, 0x00109);
+CPUMF_EVENT_ATTR(cf_z15, DFLT_CCFINISH, 0x00109);
 CPUMF_EVENT_ATTR(cf_z15, MT_DIAG_CYCLES_ONE_THR_ACTIVE, 0x01c0);
 CPUMF_EVENT_ATTR(cf_z15, MT_DIAG_CYCLES_TWO_THR_ACTIVE, 0x01c1);
 
@@ -629,7 +629,7 @@ static struct attribute *cpumcf_z15_pmu_event_attr[] __initdata = {
 	CPUMF_EVENT_PTR(cf_z15, DFLT_ACCESS),
 	CPUMF_EVENT_PTR(cf_z15, DFLT_CYCLES),
 	CPUMF_EVENT_PTR(cf_z15, DFLT_CC),
-	CPUMF_EVENT_PTR(cf_z15, DFLT_CCERROR),
+	CPUMF_EVENT_PTR(cf_z15, DFLT_CCFINISH),
 	CPUMF_EVENT_PTR(cf_z15, MT_DIAG_CYCLES_ONE_THR_ACTIVE),
 	CPUMF_EVENT_PTR(cf_z15, MT_DIAG_CYCLES_TWO_THR_ACTIVE),
 	NULL,
diff --git a/arch/s390/kernel/perf_cpum_sf.c b/arch/s390/kernel/perf_cpum_sf.c
index 85a711d783eb..4f9e4626df55 100644
--- a/arch/s390/kernel/perf_cpum_sf.c
+++ b/arch/s390/kernel/perf_cpum_sf.c
@@ -881,12 +881,21 @@ out:
 	return err;
 }
 
+static bool is_callchain_event(struct perf_event *event)
+{
+	u64 sample_type = event->attr.sample_type;
+
+	return sample_type & (PERF_SAMPLE_CALLCHAIN | PERF_SAMPLE_REGS_USER |
+			      PERF_SAMPLE_STACK_USER);
+}
+
 static int cpumsf_pmu_event_init(struct perf_event *event)
 {
 	int err;
 
 	/* No support for taken branch sampling */
-	if (has_branch_stack(event))
+	/* No support for callchain, stacks and registers */
+	if (has_branch_stack(event) || is_callchain_event(event))
 		return -EOPNOTSUPP;
 
 	switch (event->attr.type) {
diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c
index eb6e23ad15a2..b06dec1267d0 100644
--- a/arch/s390/kernel/process.c
+++ b/arch/s390/kernel/process.c
@@ -80,8 +80,8 @@ int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
 	return 0;
 }
 
-int copy_thread_tls(unsigned long clone_flags, unsigned long new_stackp,
-		    unsigned long arg, struct task_struct *p, unsigned long tls)
+int copy_thread(unsigned long clone_flags, unsigned long new_stackp,
+		unsigned long arg, struct task_struct *p, unsigned long tls)
 {
 	struct fake_frame
 	{
diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c
index ce60a459a143..3cc15c066298 100644
--- a/arch/s390/kernel/ptrace.c
+++ b/arch/s390/kernel/ptrace.c
@@ -323,6 +323,25 @@ static inline void __poke_user_per(struct task_struct *child,
 		child->thread.per_user.end = data;
 }
 
+static void fixup_int_code(struct task_struct *child, addr_t data)
+{
+	struct pt_regs *regs = task_pt_regs(child);
+	int ilc = regs->int_code >> 16;
+	u16 insn;
+
+	if (ilc > 6)
+		return;
+
+	if (ptrace_access_vm(child, regs->psw.addr - (regs->int_code >> 16),
+			&insn, sizeof(insn), FOLL_FORCE) != sizeof(insn))
+		return;
+
+	/* double check that tracee stopped on svc instruction */
+	if ((insn >> 8) != 0xa)
+		return;
+
+	regs->int_code = 0x20000 | (data & 0xffff);
+}
 /*
  * Write a word to the user area of a process at location addr. This
  * operation does have an additional problem compared to peek_user.
@@ -334,7 +353,9 @@ static int __poke_user(struct task_struct *child, addr_t addr, addr_t data)
 	struct user *dummy = NULL;
 	addr_t offset;
 
+
 	if (addr < (addr_t) &dummy->regs.acrs) {
+		struct pt_regs *regs = task_pt_regs(child);
 		/*
 		 * psw and gprs are stored on the stack
 		 */
@@ -352,7 +373,11 @@ static int __poke_user(struct task_struct *child, addr_t addr, addr_t data)
 				/* Invalid addressing mode bits */
 				return -EINVAL;
 		}
-		*(addr_t *)((addr_t) &task_pt_regs(child)->psw + addr) = data;
+
+		if (test_pt_regs_flag(regs, PIF_SYSCALL) &&
+			addr == offsetof(struct user, regs.gprs[2]))
+			fixup_int_code(child, data);
+		*(addr_t *)((addr_t) &regs->psw + addr) = data;
 
 	} else if (addr < (addr_t) (&dummy->regs.orig_gpr2)) {
 		/*
@@ -718,6 +743,10 @@ static int __poke_user_compat(struct task_struct *child,
 			regs->psw.mask = (regs->psw.mask & ~PSW_MASK_BA) |
 				(__u64)(tmp & PSW32_ADDR_AMODE);
 		} else {
+
+			if (test_pt_regs_flag(regs, PIF_SYSCALL) &&
+				addr == offsetof(struct compat_user, regs.gprs[2]))
+				fixup_int_code(child, data);
 			/* gpr 0-15 */
 			*(__u32*)((addr_t) &regs->psw + addr*2 + 4) = tmp;
 		}
@@ -837,40 +866,66 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 asmlinkage long do_syscall_trace_enter(struct pt_regs *regs)
 {
 	unsigned long mask = -1UL;
+	long ret = -1;
+
+	if (is_compat_task())
+		mask = 0xffffffff;
 
 	/*
 	 * The sysc_tracesys code in entry.S stored the system
 	 * call number to gprs[2].
 	 */
 	if (test_thread_flag(TIF_SYSCALL_TRACE) &&
-	    (tracehook_report_syscall_entry(regs) ||
-	     regs->gprs[2] >= NR_syscalls)) {
+	    tracehook_report_syscall_entry(regs)) {
 		/*
-		 * Tracing decided this syscall should not happen or the
-		 * debugger stored an invalid system call number. Skip
+		 * Tracing decided this syscall should not happen. Skip
 		 * the system call and the system call restart handling.
 		 */
-		clear_pt_regs_flag(regs, PIF_SYSCALL);
-		return -1;
+		goto skip;
 	}
 
+#ifdef CONFIG_SECCOMP
 	/* Do the secure computing check after ptrace. */
-	if (secure_computing()) {
-		/* seccomp failures shouldn't expose any additional code. */
-		return -1;
+	if (unlikely(test_thread_flag(TIF_SECCOMP))) {
+		struct seccomp_data sd;
+
+		if (is_compat_task()) {
+			sd.instruction_pointer = regs->psw.addr & 0x7fffffff;
+			sd.arch = AUDIT_ARCH_S390;
+		} else {
+			sd.instruction_pointer = regs->psw.addr;
+			sd.arch = AUDIT_ARCH_S390X;
+		}
+
+		sd.nr = regs->int_code & 0xffff;
+		sd.args[0] = regs->orig_gpr2 & mask;
+		sd.args[1] = regs->gprs[3] & mask;
+		sd.args[2] = regs->gprs[4] & mask;
+		sd.args[3] = regs->gprs[5] & mask;
+		sd.args[4] = regs->gprs[6] & mask;
+		sd.args[5] = regs->gprs[7] & mask;
+
+		if (__secure_computing(&sd) == -1)
+			goto skip;
 	}
+#endif /* CONFIG_SECCOMP */
 
 	if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
-		trace_sys_enter(regs, regs->gprs[2]);
+		trace_sys_enter(regs, regs->int_code & 0xffff);
 
-	if (is_compat_task())
-		mask = 0xffffffff;
 
-	audit_syscall_entry(regs->gprs[2], regs->orig_gpr2 & mask,
+	audit_syscall_entry(regs->int_code & 0xffff, regs->orig_gpr2 & mask,
 			    regs->gprs[3] &mask, regs->gprs[4] &mask,
 			    regs->gprs[5] &mask);
 
+	if ((signed long)regs->gprs[2] >= NR_syscalls) {
+		regs->gprs[2] = -ENOSYS;
+		ret = -ENOSYS;
+	}
 	return regs->gprs[2];
+skip:
+	clear_pt_regs_flag(regs, PIF_SYSCALL);
+	return ret;
 }
 
 asmlinkage void do_syscall_trace_exit(struct pt_regs *regs)
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index 5853c9872dfe..0c4194d407ac 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -1100,6 +1100,7 @@ void __init setup_arch(char **cmdline_p)
 	if (IS_ENABLED(CONFIG_EXPOLINE_AUTO))
 		nospec_auto_detect();
 
+	jump_label_init();
 	parse_early_param();
 #ifdef CONFIG_CRASH_DUMP
 	/* Deactivate elfcorehdr= kernel parameter */
@@ -1126,14 +1127,6 @@ void __init setup_arch(char **cmdline_p)
 	free_mem_detect_info();
 	remove_oldmem();
 
-	/*
-	 * Make sure all chunks are MAX_ORDER aligned so we don't need the
-	 * extra checks that HOLES_IN_ZONE would require.
-	 *
-	 * Is this still required?
-	 */
-	memblock_trim_memory(1UL << (MAX_ORDER - 1 + PAGE_SHIFT));
-
 	if (is_prot_virt_host())
 		setup_uv();
 	setup_memory_end();
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index e6be63ff162a..85700bd85f98 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -146,7 +146,7 @@ static int pcpu_sigp_retry(struct pcpu *pcpu, u8 order, u32 parm)
 
 static inline int pcpu_stopped(struct pcpu *pcpu)
 {
-	u32 uninitialized_var(status);
+	u32 status;
 
 	if (__pcpu_sigp(pcpu->address, SIGP_SENSE,
 			0, &status) != SIGP_CC_STATUS_STORED)
@@ -1012,10 +1012,6 @@ void __init smp_prepare_boot_cpu(void)
 	smp_cpu_set_polarization(0, POLARIZATION_UNKNOWN);
 }
 
-void __init smp_cpus_done(unsigned int max_cpus)
-{
-}
-
 void __init smp_setup_processor_id(void)
 {
 	pcpu_devices[0].address = stap();
@@ -1145,6 +1141,7 @@ static int smp_cpu_online(unsigned int cpu)
 
 	return sysfs_create_group(&s->kobj, &cpu_online_attr_group);
 }
+
 static int smp_cpu_pre_down(unsigned int cpu)
 {
 	struct device *s = &per_cpu(cpu_device, cpu)->dev;
diff --git a/arch/s390/kernel/syscalls/syscall.tbl b/arch/s390/kernel/syscalls/syscall.tbl
index bfdcb7633957..effb5195608c 100644
--- a/arch/s390/kernel/syscalls/syscall.tbl
+++ b/arch/s390/kernel/syscalls/syscall.tbl
@@ -438,6 +438,7 @@
 433  common	fspick			sys_fspick			sys_fspick
 434  common	pidfd_open		sys_pidfd_open			sys_pidfd_open
 435  common	clone3			sys_clone3			sys_clone3
+436  common	close_range		sys_close_range			sys_close_range
 437  common	openat2			sys_openat2			sys_openat2
 438  common	pidfd_getfd		sys_pidfd_getfd			sys_pidfd_getfd
 439  common	faccessat2		sys_faccessat2			sys_faccessat2
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index f9d070d016e3..513e59d08a55 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -237,7 +237,7 @@ static u64 read_tod_clock(struct clocksource *cs)
 	preempt_disable(); /* protect from changes to steering parameters */
 	now = get_tod_clock();
 	adj = tod_steering_end - now;
-	if (unlikely((s64) adj >= 0))
+	if (unlikely((s64) adj > 0))
 		/*
 		 * manually steer by 1 cycle every 2^16 cycles. This
 		 * corresponds to shifting the tod delta by 15. 1s is
@@ -253,7 +253,7 @@ static struct clocksource clocksource_tod = {
 	.name		= "tod",
 	.rating		= 400,
 	.read		= read_tod_clock,
-	.mask		= -1ULL,
+	.mask		= CLOCKSOURCE_MASK(64),
 	.mult		= 1000,
 	.shift		= 12,
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
@@ -301,6 +301,7 @@ void update_vsyscall(struct timekeeper *tk)
 
 	vdso_data->tk_mult = tk->tkr_mono.mult;
 	vdso_data->tk_shift = tk->tkr_mono.shift;
+	vdso_data->hrtimer_res = hrtimer_resolution;
 	smp_wmb();
 	++vdso_data->tb_update_count;
 }
@@ -668,7 +669,7 @@ static void stp_work_fn(struct work_struct *work)
 		 * There is a usable clock but the synchonization failed.
 		 * Retry after a second.
 		 */
-		mod_timer(&stp_timer, jiffies + HZ);
+		mod_timer(&stp_timer, jiffies + msecs_to_jiffies(MSEC_PER_SEC));
 
 out_unlock:
 	mutex_unlock(&stp_work_mutex);
@@ -682,7 +683,7 @@ static struct bus_type stp_subsys = {
 	.dev_name	= "stp",
 };
 
-static ssize_t stp_ctn_id_show(struct device *dev,
+static ssize_t ctn_id_show(struct device *dev,
 				struct device_attribute *attr,
 				char *buf)
 {
@@ -692,9 +693,9 @@ static ssize_t stp_ctn_id_show(struct device *dev,
 		       *(unsigned long long *) stp_info.ctnid);
 }
 
-static DEVICE_ATTR(ctn_id, 0400, stp_ctn_id_show, NULL);
+static DEVICE_ATTR_RO(ctn_id);
 
-static ssize_t stp_ctn_type_show(struct device *dev,
+static ssize_t ctn_type_show(struct device *dev,
 				struct device_attribute *attr,
 				char *buf)
 {
@@ -703,9 +704,9 @@ static ssize_t stp_ctn_type_show(struct device *dev,
 	return sprintf(buf, "%i\n", stp_info.ctn);
 }
 
-static DEVICE_ATTR(ctn_type, 0400, stp_ctn_type_show, NULL);
+static DEVICE_ATTR_RO(ctn_type);
 
-static ssize_t stp_dst_offset_show(struct device *dev,
+static ssize_t dst_offset_show(struct device *dev,
 				   struct device_attribute *attr,
 				   char *buf)
 {
@@ -714,9 +715,9 @@ static ssize_t stp_dst_offset_show(struct device *dev,
 	return sprintf(buf, "%i\n", (int)(s16) stp_info.dsto);
 }
 
-static DEVICE_ATTR(dst_offset, 0400, stp_dst_offset_show, NULL);
+static DEVICE_ATTR_RO(dst_offset);
 
-static ssize_t stp_leap_seconds_show(struct device *dev,
+static ssize_t leap_seconds_show(struct device *dev,
 					struct device_attribute *attr,
 					char *buf)
 {
@@ -725,9 +726,9 @@ static ssize_t stp_leap_seconds_show(struct device *dev,
 	return sprintf(buf, "%i\n", (int)(s16) stp_info.leaps);
 }
 
-static DEVICE_ATTR(leap_seconds, 0400, stp_leap_seconds_show, NULL);
+static DEVICE_ATTR_RO(leap_seconds);
 
-static ssize_t stp_stratum_show(struct device *dev,
+static ssize_t stratum_show(struct device *dev,
 				struct device_attribute *attr,
 				char *buf)
 {
@@ -736,9 +737,9 @@ static ssize_t stp_stratum_show(struct device *dev,
 	return sprintf(buf, "%i\n", (int)(s16) stp_info.stratum);
 }
 
-static DEVICE_ATTR(stratum, 0400, stp_stratum_show, NULL);
+static DEVICE_ATTR_RO(stratum);
 
-static ssize_t stp_time_offset_show(struct device *dev,
+static ssize_t time_offset_show(struct device *dev,
 				struct device_attribute *attr,
 				char *buf)
 {
@@ -747,9 +748,9 @@ static ssize_t stp_time_offset_show(struct device *dev,
 	return sprintf(buf, "%i\n", (int) stp_info.tto);
 }
 
-static DEVICE_ATTR(time_offset, 0400, stp_time_offset_show, NULL);
+static DEVICE_ATTR_RO(time_offset);
 
-static ssize_t stp_time_zone_offset_show(struct device *dev,
+static ssize_t time_zone_offset_show(struct device *dev,
 				struct device_attribute *attr,
 				char *buf)
 {
@@ -758,10 +759,9 @@ static ssize_t stp_time_zone_offset_show(struct device *dev,
 	return sprintf(buf, "%i\n", (int)(s16) stp_info.tzo);
 }
 
-static DEVICE_ATTR(time_zone_offset, 0400,
-			 stp_time_zone_offset_show, NULL);
+static DEVICE_ATTR_RO(time_zone_offset);
 
-static ssize_t stp_timing_mode_show(struct device *dev,
+static ssize_t timing_mode_show(struct device *dev,
 				struct device_attribute *attr,
 				char *buf)
 {
@@ -770,9 +770,9 @@ static ssize_t stp_timing_mode_show(struct device *dev,
 	return sprintf(buf, "%i\n", stp_info.tmd);
 }
 
-static DEVICE_ATTR(timing_mode, 0400, stp_timing_mode_show, NULL);
+static DEVICE_ATTR_RO(timing_mode);
 
-static ssize_t stp_timing_state_show(struct device *dev,
+static ssize_t timing_state_show(struct device *dev,
 				struct device_attribute *attr,
 				char *buf)
 {
@@ -781,16 +781,16 @@ static ssize_t stp_timing_state_show(struct device *dev,
 	return sprintf(buf, "%i\n", stp_info.tst);
 }
 
-static DEVICE_ATTR(timing_state, 0400, stp_timing_state_show, NULL);
+static DEVICE_ATTR_RO(timing_state);
 
-static ssize_t stp_online_show(struct device *dev,
+static ssize_t online_show(struct device *dev,
 				struct device_attribute *attr,
 				char *buf)
 {
 	return sprintf(buf, "%i\n", stp_online);
 }
 
-static ssize_t stp_online_store(struct device *dev,
+static ssize_t online_store(struct device *dev,
 				struct device_attribute *attr,
 				const char *buf, size_t count)
 {
@@ -816,18 +816,14 @@ static ssize_t stp_online_store(struct device *dev,
  * Can't use DEVICE_ATTR because the attribute should be named
  * stp/online but dev_attr_online already exists in this file ..
  */
-static struct device_attribute dev_attr_stp_online = {
-	.attr = { .name = "online", .mode = 0600 },
-	.show	= stp_online_show,
-	.store	= stp_online_store,
-};
+static DEVICE_ATTR_RW(online);
 
 static struct device_attribute *stp_attributes[] = {
 	&dev_attr_ctn_id,
 	&dev_attr_ctn_type,
 	&dev_attr_dst_offset,
 	&dev_attr_leap_seconds,
-	&dev_attr_stp_online,
+	&dev_attr_online,
 	&dev_attr_stratum,
 	&dev_attr_time_offset,
 	&dev_attr_time_zone_offset,
diff --git a/arch/s390/kernel/topology.c b/arch/s390/kernel/topology.c
index 332b542548cd..ca47141a5be9 100644
--- a/arch/s390/kernel/topology.c
+++ b/arch/s390/kernel/topology.c
@@ -356,9 +356,9 @@ static atomic_t topology_poll = ATOMIC_INIT(0);
 static void set_topology_timer(void)
 {
 	if (atomic_add_unless(&topology_poll, -1, 0))
-		mod_timer(&topology_timer, jiffies + HZ / 10);
+		mod_timer(&topology_timer, jiffies + msecs_to_jiffies(100));
 	else
-		mod_timer(&topology_timer, jiffies + HZ * 60);
+		mod_timer(&topology_timer, jiffies + msecs_to_jiffies(60 * MSEC_PER_SEC));
 }
 
 void topology_expect_change(void)
diff --git a/arch/s390/kernel/traps.c b/arch/s390/kernel/traps.c
index ff9cc4c3290e..8d1e8a1a97df 100644
--- a/arch/s390/kernel/traps.c
+++ b/arch/s390/kernel/traps.c
@@ -50,11 +50,8 @@ void do_report_trap(struct pt_regs *regs, int si_signo, int si_code, char *str)
         } else {
                 const struct exception_table_entry *fixup;
 		fixup = s390_search_extables(regs->psw.addr);
-                if (fixup)
-			regs->psw.addr = extable_fixup(fixup);
-		else {
+		if (!fixup || !ex_handle(fixup, regs))
 			die(regs, str);
-		}
         }
 }
 
@@ -251,7 +248,7 @@ void monitor_event_exception(struct pt_regs *regs)
 	case BUG_TRAP_TYPE_NONE:
 		fixup = s390_search_extables(regs->psw.addr);
 		if (fixup)
-			regs->psw.addr = extable_fixup(fixup);
+			ex_handle(fixup, regs);
 		break;
 	case BUG_TRAP_TYPE_WARN:
 		break;
diff --git a/arch/s390/kernel/uv.c b/arch/s390/kernel/uv.c
index 66e89b2866d7..c296e5c8dbf9 100644
--- a/arch/s390/kernel/uv.c
+++ b/arch/s390/kernel/uv.c
@@ -331,7 +331,7 @@ EXPORT_SYMBOL_GPL(arch_make_page_accessible);
 static ssize_t uv_query_facilities(struct kobject *kobj,
 				   struct kobj_attribute *attr, char *page)
 {
-	return snprintf(page, PAGE_SIZE, "%lx\n%lx\n%lx\n%lx\n",
+	return scnprintf(page, PAGE_SIZE, "%lx\n%lx\n%lx\n%lx\n",
 			uv_info.inst_calls_list[0],
 			uv_info.inst_calls_list[1],
 			uv_info.inst_calls_list[2],
@@ -344,7 +344,7 @@ static struct kobj_attribute uv_query_facilities_attr =
 static ssize_t uv_query_max_guest_cpus(struct kobject *kobj,
 				       struct kobj_attribute *attr, char *page)
 {
-	return snprintf(page, PAGE_SIZE, "%d\n",
+	return scnprintf(page, PAGE_SIZE, "%d\n",
 			uv_info.max_guest_cpus);
 }
 
@@ -354,7 +354,7 @@ static struct kobj_attribute uv_query_max_guest_cpus_attr =
 static ssize_t uv_query_max_guest_vms(struct kobject *kobj,
 				      struct kobj_attribute *attr, char *page)
 {
-	return snprintf(page, PAGE_SIZE, "%d\n",
+	return scnprintf(page, PAGE_SIZE, "%d\n",
 			uv_info.max_num_sec_conf);
 }
 
@@ -364,7 +364,7 @@ static struct kobj_attribute uv_query_max_guest_vms_attr =
 static ssize_t uv_query_max_guest_addr(struct kobject *kobj,
 				       struct kobj_attribute *attr, char *page)
 {
-	return snprintf(page, PAGE_SIZE, "%lx\n",
+	return scnprintf(page, PAGE_SIZE, "%lx\n",
 			uv_info.max_sec_stor_addr);
 }
 
diff --git a/arch/s390/kernel/vdso64/Makefile b/arch/s390/kernel/vdso64/Makefile
index bec19e7e6e1c..4a66a1cb919b 100644
--- a/arch/s390/kernel/vdso64/Makefile
+++ b/arch/s390/kernel/vdso64/Makefile
@@ -18,8 +18,8 @@ KBUILD_AFLAGS_64 += -m64 -s
 
 KBUILD_CFLAGS_64 := $(filter-out -m64,$(KBUILD_CFLAGS))
 KBUILD_CFLAGS_64 += -m64 -fPIC -shared -fno-common -fno-builtin
-KBUILD_CFLAGS_64 += -nostdlib -Wl,-soname=linux-vdso64.so.1 \
-		    -Wl,--hash-style=both
+ldflags-y := -fPIC -shared -nostdlib -soname=linux-vdso64.so.1 \
+	     --hash-style=both --build-id -T
 
 $(targets:%=$(obj)/%.dbg): KBUILD_CFLAGS = $(KBUILD_CFLAGS_64)
 $(targets:%=$(obj)/%.dbg): KBUILD_AFLAGS = $(KBUILD_AFLAGS_64)
@@ -37,8 +37,8 @@ KASAN_SANITIZE := n
 $(obj)/vdso64_wrapper.o : $(obj)/vdso64.so
 
 # link rule for the .so file, .lds has to be first
-$(obj)/vdso64.so.dbg: $(src)/vdso64.lds $(obj-vdso64) FORCE
-	$(call if_changed,vdso64ld)
+$(obj)/vdso64.so.dbg: $(obj)/vdso64.lds $(obj-vdso64) FORCE
+	$(call if_changed,ld)
 
 # strip rule for the .so file
 $(obj)/%.so: OBJCOPYFLAGS := -S
@@ -50,8 +50,6 @@ $(obj-vdso64): %.o: %.S FORCE
 	$(call if_changed_dep,vdso64as)
 
 # actual build commands
-quiet_cmd_vdso64ld = VDSO64L $@
-      cmd_vdso64ld = $(CC) $(c_flags) -Wl,-T $(filter %.lds %.o,$^) -o $@
 quiet_cmd_vdso64as = VDSO64A $@
       cmd_vdso64as = $(CC) $(a_flags) -c -o $@ $<
 
diff --git a/arch/s390/kernel/vdso64/clock_getres.S b/arch/s390/kernel/vdso64/clock_getres.S
index 081435398e0a..0c79caa32b59 100644
--- a/arch/s390/kernel/vdso64/clock_getres.S
+++ b/arch/s390/kernel/vdso64/clock_getres.S
@@ -17,12 +17,14 @@
 	.type  __kernel_clock_getres,@function
 __kernel_clock_getres:
 	CFI_STARTPROC
-	larl	%r1,4f
+	larl	%r1,3f
+	lg	%r0,0(%r1)
 	cghi	%r2,__CLOCK_REALTIME_COARSE
 	je	0f
 	cghi	%r2,__CLOCK_MONOTONIC_COARSE
 	je	0f
-	larl	%r1,3f
+	larl	%r1,_vdso_data
+	llgf	%r0,__VDSO_CLOCK_REALTIME_RES(%r1)
 	cghi	%r2,__CLOCK_REALTIME
 	je	0f
 	cghi	%r2,__CLOCK_MONOTONIC
@@ -36,7 +38,6 @@ __kernel_clock_getres:
 	jz	2f
 0:	ltgr	%r3,%r3
 	jz	1f				/* res == NULL */
-	lg	%r0,0(%r1)
 	xc	0(8,%r3),0(%r3)			/* set tp->tv_sec to zero */
 	stg	%r0,8(%r3)			/* store tp->tv_usec */
 1:	lghi	%r2,0
@@ -45,6 +46,5 @@ __kernel_clock_getres:
 	svc	0
 	br	%r14
 	CFI_ENDPROC
-3:	.quad	__CLOCK_REALTIME_RES
-4:	.quad	__CLOCK_COARSE_RES
+3:	.quad	__CLOCK_COARSE_RES
 	.size	__kernel_clock_getres,.-__kernel_clock_getres
diff --git a/arch/s390/lib/Makefile b/arch/s390/lib/Makefile
index 28fd66d558ff..678333936f78 100644
--- a/arch/s390/lib/Makefile
+++ b/arch/s390/lib/Makefile
@@ -14,3 +14,5 @@ KASAN_SANITIZE_uaccess.o := n
 
 obj-$(CONFIG_S390_UNWIND_SELFTEST) += test_unwind.o
 CFLAGS_test_unwind.o += -fno-optimize-sibling-calls
+
+lib-$(CONFIG_FUNCTION_ERROR_INJECTION) += error-inject.o
diff --git a/arch/s390/lib/error-inject.c b/arch/s390/lib/error-inject.c
new file mode 100644
index 000000000000..8c9d4da87eef
--- /dev/null
+++ b/arch/s390/lib/error-inject.c
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+
+#include <asm/ptrace.h>
+#include <linux/error-injection.h>
+#include <linux/kprobes.h>
+
+void override_function_with_return(struct pt_regs *regs)
+{
+	/*
+	 * Emulate 'br 14'. 'regs' is captured by kprobes on entry to some
+	 * kernel function.
+	 */
+	regs->psw.addr = regs->gprs[14];
+}
+NOKPROBE_SYMBOL(override_function_with_return);
diff --git a/arch/s390/mm/cmm.c b/arch/s390/mm/cmm.c
index 36bce727897b..5c15ae3daf71 100644
--- a/arch/s390/mm/cmm.c
+++ b/arch/s390/mm/cmm.c
@@ -189,7 +189,7 @@ static void cmm_set_timer(void)
 			del_timer(&cmm_timer);
 		return;
 	}
-	mod_timer(&cmm_timer, jiffies + cmm_timeout_seconds * HZ);
+	mod_timer(&cmm_timer, jiffies + msecs_to_jiffies(cmm_timeout_seconds * MSEC_PER_SEC));
 }
 
 static void cmm_timer_fn(struct timer_list *unused)
diff --git a/arch/s390/mm/extmem.c b/arch/s390/mm/extmem.c
index 9e0aa7aa03ba..5060956b8e7d 100644
--- a/arch/s390/mm/extmem.c
+++ b/arch/s390/mm/extmem.c
@@ -313,15 +313,10 @@ __segment_load (char *name, int do_nonshared, unsigned long *addr, unsigned long
 		goto out_free;
 	}
 
-	rc = vmem_add_mapping(seg->start_addr, seg->end - seg->start_addr + 1);
-
-	if (rc)
-		goto out_free;
-
 	seg->res = kzalloc(sizeof(struct resource), GFP_KERNEL);
 	if (seg->res == NULL) {
 		rc = -ENOMEM;
-		goto out_shared;
+		goto out_free;
 	}
 	seg->res->flags = IORESOURCE_BUSY | IORESOURCE_MEM;
 	seg->res->start = seg->start_addr;
@@ -335,12 +330,17 @@ __segment_load (char *name, int do_nonshared, unsigned long *addr, unsigned long
 	if (rc == SEG_TYPE_SC ||
 	    ((rc == SEG_TYPE_SR || rc == SEG_TYPE_ER) && !do_nonshared))
 		seg->res->flags |= IORESOURCE_READONLY;
+
+	/* Check for overlapping resources before adding the mapping. */
 	if (request_resource(&iomem_resource, seg->res)) {
 		rc = -EBUSY;
-		kfree(seg->res);
-		goto out_shared;
+		goto out_free_resource;
 	}
 
+	rc = vmem_add_mapping(seg->start_addr, seg->end - seg->start_addr + 1);
+	if (rc)
+		goto out_resource;
+
 	if (do_nonshared)
 		diag_cc = dcss_diag(&loadnsr_scode, seg->dcss_name,
 				&start_addr, &end_addr);
@@ -351,14 +351,14 @@ __segment_load (char *name, int do_nonshared, unsigned long *addr, unsigned long
 		dcss_diag(&purgeseg_scode, seg->dcss_name,
 				&dummy, &dummy);
 		rc = diag_cc;
-		goto out_resource;
+		goto out_mapping;
 	}
 	if (diag_cc > 1) {
 		pr_warn("Loading DCSS %s failed with rc=%ld\n", name, end_addr);
 		rc = dcss_diag_translate_rc(end_addr);
 		dcss_diag(&purgeseg_scode, seg->dcss_name,
 				&dummy, &dummy);
-		goto out_resource;
+		goto out_mapping;
 	}
 	seg->start_addr = start_addr;
 	seg->end = end_addr;
@@ -377,11 +377,12 @@ __segment_load (char *name, int do_nonshared, unsigned long *addr, unsigned long
 			(void*) seg->end, segtype_string[seg->vm_segtype]);
 	}
 	goto out;
+ out_mapping:
+	vmem_remove_mapping(seg->start_addr, seg->end - seg->start_addr + 1);
  out_resource:
 	release_resource(seg->res);
+ out_free_resource:
 	kfree(seg->res);
- out_shared:
-	vmem_remove_mapping(seg->start_addr, seg->end - seg->start_addr + 1);
  out_free:
 	kfree(seg);
  out:
@@ -400,8 +401,7 @@ __segment_load (char *name, int do_nonshared, unsigned long *addr, unsigned long
  * -EIO     : could not perform query or load diagnose
  * -ENOENT  : no such segment
  * -EOPNOTSUPP: multi-part segment cannot be used with linux
- * -ENOSPC  : segment cannot be used (overlaps with storage)
- * -EBUSY   : segment can temporarily not be used (overlaps with dcss)
+ * -EBUSY   : segment cannot be used (overlaps with dcss or storage)
  * -ERANGE  : segment cannot be used (exceeds kernel mapping range)
  * -EPERM   : segment is currently loaded with incompatible permissions
  * -ENOMEM  : out of memory
@@ -626,10 +626,6 @@ void segment_warning(int rc, char *seg_name)
 		pr_err("DCSS %s has multiple page ranges and cannot be "
 		       "loaded or queried\n", seg_name);
 		break;
-	case -ENOSPC:
-		pr_err("DCSS %s overlaps with used storage and cannot "
-		       "be loaded\n", seg_name);
-		break;
 	case -EBUSY:
 		pr_err("%s needs used memory resources and cannot be "
 		       "loaded or queried\n", seg_name);
diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c
index 6a24751557f0..aebf9183bedd 100644
--- a/arch/s390/mm/fault.c
+++ b/arch/s390/mm/fault.c
@@ -105,7 +105,7 @@ static int bad_address(void *p)
 {
 	unsigned long dummy;
 
-	return probe_kernel_address((unsigned long *)p, dummy);
+	return get_kernel_nofault(dummy, (unsigned long *)p);
 }
 
 static void dump_pagetable(unsigned long asce, unsigned long address)
@@ -255,10 +255,8 @@ static noinline void do_no_context(struct pt_regs *regs)
 
 	/* Are we prepared to handle this kernel fault?  */
 	fixup = s390_search_extables(regs->psw.addr);
-	if (fixup) {
-		regs->psw.addr = extable_fixup(fixup);
+	if (fixup && ex_handle(fixup, regs))
 		return;
-	}
 
 	/*
 	 * Oops. The kernel tried to access some bad page. We'll have to
@@ -376,7 +374,7 @@ static noinline void do_fault_error(struct pt_regs *regs, int access,
  * routines.
  *
  * interruption code (int_code):
- *   04       Protection           ->  Write-Protection  (suprression)
+ *   04       Protection           ->  Write-Protection  (suppression)
  *   10       Segment translation  ->  Not present       (nullification)
  *   11       Page translation     ->  Not present       (nullification)
  *   3b       Region third trans.  ->  Not present       (nullification)
diff --git a/arch/s390/mm/hugetlbpage.c b/arch/s390/mm/hugetlbpage.c
index 82df06d720e8..3b5a4d25ca9b 100644
--- a/arch/s390/mm/hugetlbpage.c
+++ b/arch/s390/mm/hugetlbpage.c
@@ -117,7 +117,7 @@ static inline pte_t __rste_to_pte(unsigned long rste)
 					     _PAGE_YOUNG);
 #ifdef CONFIG_MEM_SOFT_DIRTY
 		pte_val(pte) |= move_set_bit(rste, _SEGMENT_ENTRY_SOFT_DIRTY,
-					     _PAGE_DIRTY);
+					     _PAGE_SOFT_DIRTY);
 #endif
 		pte_val(pte) |= move_set_bit(rste, _SEGMENT_ENTRY_NOEXEC,
 					     _PAGE_NOEXEC);
diff --git a/arch/s390/mm/maccess.c b/arch/s390/mm/maccess.c
index 22a0be655f27..1d17413b319a 100644
--- a/arch/s390/mm/maccess.c
+++ b/arch/s390/mm/maccess.c
@@ -62,11 +62,15 @@ notrace void *s390_kernel_write(void *dst, const void *src, size_t size)
 	long copied;
 
 	spin_lock_irqsave(&s390_kernel_write_lock, flags);
-	while (size) {
-		copied = s390_kernel_write_odd(tmp, src, size);
-		tmp += copied;
-		src += copied;
-		size -= copied;
+	if (!(flags & PSW_MASK_DAT)) {
+		memcpy(dst, src, size);
+	} else {
+		while (size) {
+			copied = s390_kernel_write_odd(tmp, src, size);
+			tmp += copied;
+			src += copied;
+			size -= copied;
+		}
 	}
 	spin_unlock_irqrestore(&s390_kernel_write_lock, flags);
 
diff --git a/arch/s390/mm/vmem.c b/arch/s390/mm/vmem.c
index 8b6282cf7d13..1aed1a4dfc2d 100644
--- a/arch/s390/mm/vmem.c
+++ b/arch/s390/mm/vmem.c
@@ -20,14 +20,6 @@
 
 static DEFINE_MUTEX(vmem_mutex);
 
-struct memory_segment {
-	struct list_head list;
-	unsigned long start;
-	unsigned long size;
-};
-
-static LIST_HEAD(mem_segs);
-
 static void __ref *vmem_alloc_pages(unsigned int order)
 {
 	unsigned long size = PAGE_SIZE << order;
@@ -37,6 +29,15 @@ static void __ref *vmem_alloc_pages(unsigned int order)
 	return (void *) memblock_phys_alloc(size, size);
 }
 
+static void vmem_free_pages(unsigned long addr, int order)
+{
+	/* We don't expect boot memory to be removed ever. */
+	if (!slab_is_available() ||
+	    WARN_ON_ONCE(PageReserved(phys_to_page(addr))))
+		return;
+	free_pages(addr, order);
+}
+
 void *vmem_crst_alloc(unsigned long val)
 {
 	unsigned long *table;
@@ -62,332 +63,486 @@ pte_t __ref *vmem_pte_alloc(void)
 	return pte;
 }
 
+static void vmem_pte_free(unsigned long *table)
+{
+	/* We don't expect boot memory to be removed ever. */
+	if (!slab_is_available() ||
+	    WARN_ON_ONCE(PageReserved(virt_to_page(table))))
+		return;
+	page_table_free(&init_mm, table);
+}
+
+#define PAGE_UNUSED 0xFD
+
 /*
- * Add a physical memory range to the 1:1 mapping.
+ * The unused vmemmap range, which was not yet memset(PAGE_UNUSED) ranges
+ * from unused_pmd_start to next PMD_SIZE boundary.
  */
-static int vmem_add_mem(unsigned long start, unsigned long size)
+static unsigned long unused_pmd_start;
+
+static void vmemmap_flush_unused_pmd(void)
 {
-	unsigned long pgt_prot, sgt_prot, r3_prot;
-	unsigned long pages4k, pages1m, pages2g;
-	unsigned long end = start + size;
-	unsigned long address = start;
-	pgd_t *pg_dir;
-	p4d_t *p4_dir;
-	pud_t *pu_dir;
-	pmd_t *pm_dir;
-	pte_t *pt_dir;
-	int ret = -ENOMEM;
+	if (!unused_pmd_start)
+		return;
+	memset(__va(unused_pmd_start), PAGE_UNUSED,
+	       ALIGN(unused_pmd_start, PMD_SIZE) - unused_pmd_start);
+	unused_pmd_start = 0;
+}
+
+static void __vmemmap_use_sub_pmd(unsigned long start, unsigned long end)
+{
+	/*
+	 * As we expect to add in the same granularity as we remove, it's
+	 * sufficient to mark only some piece used to block the memmap page from
+	 * getting removed (just in case the memmap never gets initialized,
+	 * e.g., because the memory block never gets onlined).
+	 */
+	memset(__va(start), 0, sizeof(struct page));
+}
 
-	pgt_prot = pgprot_val(PAGE_KERNEL);
-	sgt_prot = pgprot_val(SEGMENT_KERNEL);
-	r3_prot = pgprot_val(REGION3_KERNEL);
-	if (!MACHINE_HAS_NX) {
-		pgt_prot &= ~_PAGE_NOEXEC;
-		sgt_prot &= ~_SEGMENT_ENTRY_NOEXEC;
-		r3_prot &= ~_REGION_ENTRY_NOEXEC;
+static void vmemmap_use_sub_pmd(unsigned long start, unsigned long end)
+{
+	/*
+	 * We only optimize if the new used range directly follows the
+	 * previously unused range (esp., when populating consecutive sections).
+	 */
+	if (unused_pmd_start == start) {
+		unused_pmd_start = end;
+		if (likely(IS_ALIGNED(unused_pmd_start, PMD_SIZE)))
+			unused_pmd_start = 0;
+		return;
 	}
-	pages4k = pages1m = pages2g = 0;
-	while (address < end) {
-		pg_dir = pgd_offset_k(address);
-		if (pgd_none(*pg_dir)) {
-			p4_dir = vmem_crst_alloc(_REGION2_ENTRY_EMPTY);
-			if (!p4_dir)
-				goto out;
-			pgd_populate(&init_mm, pg_dir, p4_dir);
-		}
-		p4_dir = p4d_offset(pg_dir, address);
-		if (p4d_none(*p4_dir)) {
-			pu_dir = vmem_crst_alloc(_REGION3_ENTRY_EMPTY);
-			if (!pu_dir)
-				goto out;
-			p4d_populate(&init_mm, p4_dir, pu_dir);
-		}
-		pu_dir = pud_offset(p4_dir, address);
-		if (MACHINE_HAS_EDAT2 && pud_none(*pu_dir) && address &&
-		    !(address & ~PUD_MASK) && (address + PUD_SIZE <= end) &&
-		     !debug_pagealloc_enabled()) {
-			pud_val(*pu_dir) = address | r3_prot;
-			address += PUD_SIZE;
-			pages2g++;
-			continue;
-		}
-		if (pud_none(*pu_dir)) {
-			pm_dir = vmem_crst_alloc(_SEGMENT_ENTRY_EMPTY);
-			if (!pm_dir)
-				goto out;
-			pud_populate(&init_mm, pu_dir, pm_dir);
-		}
-		pm_dir = pmd_offset(pu_dir, address);
-		if (MACHINE_HAS_EDAT1 && pmd_none(*pm_dir) && address &&
-		    !(address & ~PMD_MASK) && (address + PMD_SIZE <= end) &&
-		    !debug_pagealloc_enabled()) {
-			pmd_val(*pm_dir) = address | sgt_prot;
-			address += PMD_SIZE;
-			pages1m++;
+	vmemmap_flush_unused_pmd();
+	__vmemmap_use_sub_pmd(start, end);
+}
+
+static void vmemmap_use_new_sub_pmd(unsigned long start, unsigned long end)
+{
+	void *page = __va(ALIGN_DOWN(start, PMD_SIZE));
+
+	vmemmap_flush_unused_pmd();
+
+	/* Could be our memmap page is filled with PAGE_UNUSED already ... */
+	__vmemmap_use_sub_pmd(start, end);
+
+	/* Mark the unused parts of the new memmap page PAGE_UNUSED. */
+	if (!IS_ALIGNED(start, PMD_SIZE))
+		memset(page, PAGE_UNUSED, start - __pa(page));
+	/*
+	 * We want to avoid memset(PAGE_UNUSED) when populating the vmemmap of
+	 * consecutive sections. Remember for the last added PMD the last
+	 * unused range in the populated PMD.
+	 */
+	if (!IS_ALIGNED(end, PMD_SIZE))
+		unused_pmd_start = end;
+}
+
+/* Returns true if the PMD is completely unused and can be freed. */
+static bool vmemmap_unuse_sub_pmd(unsigned long start, unsigned long end)
+{
+	void *page = __va(ALIGN_DOWN(start, PMD_SIZE));
+
+	vmemmap_flush_unused_pmd();
+	memset(__va(start), PAGE_UNUSED, end - start);
+	return !memchr_inv(page, PAGE_UNUSED, PMD_SIZE);
+}
+
+/* __ref: we'll only call vmemmap_alloc_block() via vmemmap_populate() */
+static int __ref modify_pte_table(pmd_t *pmd, unsigned long addr,
+				  unsigned long end, bool add, bool direct)
+{
+	unsigned long prot, pages = 0;
+	int ret = -ENOMEM;
+	pte_t *pte;
+
+	prot = pgprot_val(PAGE_KERNEL);
+	if (!MACHINE_HAS_NX)
+		prot &= ~_PAGE_NOEXEC;
+
+	pte = pte_offset_kernel(pmd, addr);
+	for (; addr < end; addr += PAGE_SIZE, pte++) {
+		if (!add) {
+			if (pte_none(*pte))
+				continue;
+			if (!direct)
+				vmem_free_pages(pfn_to_phys(pte_pfn(*pte)), 0);
+			pte_clear(&init_mm, addr, pte);
+		} else if (pte_none(*pte)) {
+			if (!direct) {
+				void *new_page = vmemmap_alloc_block(PAGE_SIZE, NUMA_NO_NODE);
+
+				if (!new_page)
+					goto out;
+				pte_val(*pte) = __pa(new_page) | prot;
+			} else {
+				pte_val(*pte) = addr | prot;
+			}
+		} else {
 			continue;
 		}
-		if (pmd_none(*pm_dir)) {
-			pt_dir = vmem_pte_alloc();
-			if (!pt_dir)
-				goto out;
-			pmd_populate(&init_mm, pm_dir, pt_dir);
-		}
-
-		pt_dir = pte_offset_kernel(pm_dir, address);
-		pte_val(*pt_dir) = address | pgt_prot;
-		address += PAGE_SIZE;
-		pages4k++;
+		pages++;
 	}
 	ret = 0;
 out:
-	update_page_count(PG_DIRECT_MAP_4K, pages4k);
-	update_page_count(PG_DIRECT_MAP_1M, pages1m);
-	update_page_count(PG_DIRECT_MAP_2G, pages2g);
+	if (direct)
+		update_page_count(PG_DIRECT_MAP_4K, add ? pages : -pages);
 	return ret;
 }
 
-/*
- * Remove a physical memory range from the 1:1 mapping.
- * Currently only invalidates page table entries.
- */
-static void vmem_remove_range(unsigned long start, unsigned long size)
+static void try_free_pte_table(pmd_t *pmd, unsigned long start)
 {
-	unsigned long pages4k, pages1m, pages2g;
-	unsigned long end = start + size;
-	unsigned long address = start;
-	pgd_t *pg_dir;
-	p4d_t *p4_dir;
-	pud_t *pu_dir;
-	pmd_t *pm_dir;
-	pte_t *pt_dir;
-
-	pages4k = pages1m = pages2g = 0;
-	while (address < end) {
-		pg_dir = pgd_offset_k(address);
-		if (pgd_none(*pg_dir)) {
-			address += PGDIR_SIZE;
-			continue;
-		}
-		p4_dir = p4d_offset(pg_dir, address);
-		if (p4d_none(*p4_dir)) {
-			address += P4D_SIZE;
-			continue;
-		}
-		pu_dir = pud_offset(p4_dir, address);
-		if (pud_none(*pu_dir)) {
-			address += PUD_SIZE;
-			continue;
-		}
-		if (pud_large(*pu_dir)) {
-			pud_clear(pu_dir);
-			address += PUD_SIZE;
-			pages2g++;
-			continue;
-		}
-		pm_dir = pmd_offset(pu_dir, address);
-		if (pmd_none(*pm_dir)) {
-			address += PMD_SIZE;
-			continue;
-		}
-		if (pmd_large(*pm_dir)) {
-			pmd_clear(pm_dir);
-			address += PMD_SIZE;
-			pages1m++;
-			continue;
-		}
-		pt_dir = pte_offset_kernel(pm_dir, address);
-		pte_clear(&init_mm, address, pt_dir);
-		address += PAGE_SIZE;
-		pages4k++;
+	pte_t *pte;
+	int i;
+
+	/* We can safely assume this is fully in 1:1 mapping & vmemmap area */
+	pte = pte_offset_kernel(pmd, start);
+	for (i = 0; i < PTRS_PER_PTE; i++, pte++) {
+		if (!pte_none(*pte))
+			return;
 	}
-	flush_tlb_kernel_range(start, end);
-	update_page_count(PG_DIRECT_MAP_4K, -pages4k);
-	update_page_count(PG_DIRECT_MAP_1M, -pages1m);
-	update_page_count(PG_DIRECT_MAP_2G, -pages2g);
+	vmem_pte_free(__va(pmd_deref(*pmd)));
+	pmd_clear(pmd);
 }
 
-/*
- * Add a backed mem_map array to the virtual mem_map array.
- */
-int __meminit vmemmap_populate(unsigned long start, unsigned long end, int node,
-		struct vmem_altmap *altmap)
+/* __ref: we'll only call vmemmap_alloc_block() via vmemmap_populate() */
+static int __ref modify_pmd_table(pud_t *pud, unsigned long addr,
+				  unsigned long end, bool add, bool direct)
 {
-	unsigned long pgt_prot, sgt_prot;
-	unsigned long address = start;
-	pgd_t *pg_dir;
-	p4d_t *p4_dir;
-	pud_t *pu_dir;
-	pmd_t *pm_dir;
-	pte_t *pt_dir;
+	unsigned long next, prot, pages = 0;
 	int ret = -ENOMEM;
+	pmd_t *pmd;
+	pte_t *pte;
 
-	pgt_prot = pgprot_val(PAGE_KERNEL);
-	sgt_prot = pgprot_val(SEGMENT_KERNEL);
-	if (!MACHINE_HAS_NX) {
-		pgt_prot &= ~_PAGE_NOEXEC;
-		sgt_prot &= ~_SEGMENT_ENTRY_NOEXEC;
-	}
-	for (address = start; address < end;) {
-		pg_dir = pgd_offset_k(address);
-		if (pgd_none(*pg_dir)) {
-			p4_dir = vmem_crst_alloc(_REGION2_ENTRY_EMPTY);
-			if (!p4_dir)
-				goto out;
-			pgd_populate(&init_mm, pg_dir, p4_dir);
-		}
+	prot = pgprot_val(SEGMENT_KERNEL);
+	if (!MACHINE_HAS_NX)
+		prot &= ~_SEGMENT_ENTRY_NOEXEC;
 
-		p4_dir = p4d_offset(pg_dir, address);
-		if (p4d_none(*p4_dir)) {
-			pu_dir = vmem_crst_alloc(_REGION3_ENTRY_EMPTY);
-			if (!pu_dir)
-				goto out;
-			p4d_populate(&init_mm, p4_dir, pu_dir);
-		}
+	pmd = pmd_offset(pud, addr);
+	for (; addr < end; addr = next, pmd++) {
+		next = pmd_addr_end(addr, end);
+		if (!add) {
+			if (pmd_none(*pmd))
+				continue;
+			if (pmd_large(*pmd) && !add) {
+				if (IS_ALIGNED(addr, PMD_SIZE) &&
+				    IS_ALIGNED(next, PMD_SIZE)) {
+					if (!direct)
+						vmem_free_pages(pmd_deref(*pmd), get_order(PMD_SIZE));
+					pmd_clear(pmd);
+					pages++;
+				} else if (!direct && vmemmap_unuse_sub_pmd(addr, next)) {
+					vmem_free_pages(pmd_deref(*pmd), get_order(PMD_SIZE));
+					pmd_clear(pmd);
+				}
+				continue;
+			}
+		} else if (pmd_none(*pmd)) {
+			if (IS_ALIGNED(addr, PMD_SIZE) &&
+			    IS_ALIGNED(next, PMD_SIZE) &&
+			    MACHINE_HAS_EDAT1 && addr && direct &&
+			    !debug_pagealloc_enabled()) {
+				pmd_val(*pmd) = addr | prot;
+				pages++;
+				continue;
+			} else if (!direct && MACHINE_HAS_EDAT1) {
+				void *new_page;
 
-		pu_dir = pud_offset(p4_dir, address);
-		if (pud_none(*pu_dir)) {
-			pm_dir = vmem_crst_alloc(_SEGMENT_ENTRY_EMPTY);
-			if (!pm_dir)
+				/*
+				 * Use 1MB frames for vmemmap if available. We
+				 * always use large frames even if they are only
+				 * partially used. Otherwise we would have also
+				 * page tables since vmemmap_populate gets
+				 * called for each section separately.
+				 */
+				new_page = vmemmap_alloc_block(PMD_SIZE, NUMA_NO_NODE);
+				if (new_page) {
+					pmd_val(*pmd) = __pa(new_page) | prot;
+					if (!IS_ALIGNED(addr, PMD_SIZE) ||
+					    !IS_ALIGNED(next, PMD_SIZE)) {
+						vmemmap_use_new_sub_pmd(addr, next);
+					}
+					continue;
+				}
+			}
+			pte = vmem_pte_alloc();
+			if (!pte)
 				goto out;
-			pud_populate(&init_mm, pu_dir, pm_dir);
+			pmd_populate(&init_mm, pmd, pte);
+		} else if (pmd_large(*pmd)) {
+			if (!direct)
+				vmemmap_use_sub_pmd(addr, next);
+			continue;
 		}
+		ret = modify_pte_table(pmd, addr, next, add, direct);
+		if (ret)
+			goto out;
+		if (!add)
+			try_free_pte_table(pmd, addr & PMD_MASK);
+	}
+	ret = 0;
+out:
+	if (direct)
+		update_page_count(PG_DIRECT_MAP_1M, add ? pages : -pages);
+	return ret;
+}
 
-		pm_dir = pmd_offset(pu_dir, address);
-		if (pmd_none(*pm_dir)) {
-			/* Use 1MB frames for vmemmap if available. We always
-			 * use large frames even if they are only partially
-			 * used.
-			 * Otherwise we would have also page tables since
-			 * vmemmap_populate gets called for each section
-			 * separately. */
-			if (MACHINE_HAS_EDAT1) {
-				void *new_page;
+static void try_free_pmd_table(pud_t *pud, unsigned long start)
+{
+	const unsigned long end = start + PUD_SIZE;
+	pmd_t *pmd;
+	int i;
+
+	/* Don't mess with any tables not fully in 1:1 mapping & vmemmap area */
+	if (end > VMALLOC_START)
+		return;
+#ifdef CONFIG_KASAN
+	if (start < KASAN_SHADOW_END && KASAN_SHADOW_START > end)
+		return;
+#endif
+	pmd = pmd_offset(pud, start);
+	for (i = 0; i < PTRS_PER_PMD; i++, pmd++)
+		if (!pmd_none(*pmd))
+			return;
+	vmem_free_pages(pud_deref(*pud), CRST_ALLOC_ORDER);
+	pud_clear(pud);
+}
 
-				new_page = vmemmap_alloc_block(PMD_SIZE, node);
-				if (!new_page)
-					goto out;
-				pmd_val(*pm_dir) = __pa(new_page) | sgt_prot;
-				address = (address + PMD_SIZE) & PMD_MASK;
+static int modify_pud_table(p4d_t *p4d, unsigned long addr, unsigned long end,
+			    bool add, bool direct)
+{
+	unsigned long next, prot, pages = 0;
+	int ret = -ENOMEM;
+	pud_t *pud;
+	pmd_t *pmd;
+
+	prot = pgprot_val(REGION3_KERNEL);
+	if (!MACHINE_HAS_NX)
+		prot &= ~_REGION_ENTRY_NOEXEC;
+	pud = pud_offset(p4d, addr);
+	for (; addr < end; addr = next, pud++) {
+		next = pud_addr_end(addr, end);
+		if (!add) {
+			if (pud_none(*pud))
+				continue;
+			if (pud_large(*pud)) {
+				if (IS_ALIGNED(addr, PUD_SIZE) &&
+				    IS_ALIGNED(next, PUD_SIZE)) {
+					pud_clear(pud);
+					pages++;
+				}
+				continue;
+			}
+		} else if (pud_none(*pud)) {
+			if (IS_ALIGNED(addr, PUD_SIZE) &&
+			    IS_ALIGNED(next, PUD_SIZE) &&
+			    MACHINE_HAS_EDAT2 && addr && direct &&
+			    !debug_pagealloc_enabled()) {
+				pud_val(*pud) = addr | prot;
+				pages++;
 				continue;
 			}
-			pt_dir = vmem_pte_alloc();
-			if (!pt_dir)
+			pmd = vmem_crst_alloc(_SEGMENT_ENTRY_EMPTY);
+			if (!pmd)
 				goto out;
-			pmd_populate(&init_mm, pm_dir, pt_dir);
-		} else if (pmd_large(*pm_dir)) {
-			address = (address + PMD_SIZE) & PMD_MASK;
+			pud_populate(&init_mm, pud, pmd);
+		} else if (pud_large(*pud)) {
 			continue;
 		}
+		ret = modify_pmd_table(pud, addr, next, add, direct);
+		if (ret)
+			goto out;
+		if (!add)
+			try_free_pmd_table(pud, addr & PUD_MASK);
+	}
+	ret = 0;
+out:
+	if (direct)
+		update_page_count(PG_DIRECT_MAP_2G, add ? pages : -pages);
+	return ret;
+}
 
-		pt_dir = pte_offset_kernel(pm_dir, address);
-		if (pte_none(*pt_dir)) {
-			void *new_page;
+static void try_free_pud_table(p4d_t *p4d, unsigned long start)
+{
+	const unsigned long end = start + P4D_SIZE;
+	pud_t *pud;
+	int i;
+
+	/* Don't mess with any tables not fully in 1:1 mapping & vmemmap area */
+	if (end > VMALLOC_START)
+		return;
+#ifdef CONFIG_KASAN
+	if (start < KASAN_SHADOW_END && KASAN_SHADOW_START > end)
+		return;
+#endif
+
+	pud = pud_offset(p4d, start);
+	for (i = 0; i < PTRS_PER_PUD; i++, pud++) {
+		if (!pud_none(*pud))
+			return;
+	}
+	vmem_free_pages(p4d_deref(*p4d), CRST_ALLOC_ORDER);
+	p4d_clear(p4d);
+}
 
-			new_page = vmemmap_alloc_block(PAGE_SIZE, node);
-			if (!new_page)
+static int modify_p4d_table(pgd_t *pgd, unsigned long addr, unsigned long end,
+			    bool add, bool direct)
+{
+	unsigned long next;
+	int ret = -ENOMEM;
+	p4d_t *p4d;
+	pud_t *pud;
+
+	p4d = p4d_offset(pgd, addr);
+	for (; addr < end; addr = next, p4d++) {
+		next = p4d_addr_end(addr, end);
+		if (!add) {
+			if (p4d_none(*p4d))
+				continue;
+		} else if (p4d_none(*p4d)) {
+			pud = vmem_crst_alloc(_REGION3_ENTRY_EMPTY);
+			if (!pud)
 				goto out;
-			pte_val(*pt_dir) = __pa(new_page) | pgt_prot;
 		}
-		address += PAGE_SIZE;
+		ret = modify_pud_table(p4d, addr, next, add, direct);
+		if (ret)
+			goto out;
+		if (!add)
+			try_free_pud_table(p4d, addr & P4D_MASK);
 	}
 	ret = 0;
 out:
 	return ret;
 }
 
-void vmemmap_free(unsigned long start, unsigned long end,
-		struct vmem_altmap *altmap)
+static void try_free_p4d_table(pgd_t *pgd, unsigned long start)
 {
+	const unsigned long end = start + PGDIR_SIZE;
+	p4d_t *p4d;
+	int i;
+
+	/* Don't mess with any tables not fully in 1:1 mapping & vmemmap area */
+	if (end > VMALLOC_START)
+		return;
+#ifdef CONFIG_KASAN
+	if (start < KASAN_SHADOW_END && KASAN_SHADOW_START > end)
+		return;
+#endif
+
+	p4d = p4d_offset(pgd, start);
+	for (i = 0; i < PTRS_PER_P4D; i++, p4d++) {
+		if (!p4d_none(*p4d))
+			return;
+	}
+	vmem_free_pages(pgd_deref(*pgd), CRST_ALLOC_ORDER);
+	pgd_clear(pgd);
 }
 
-/*
- * Add memory segment to the segment list if it doesn't overlap with
- * an already present segment.
- */
-static int insert_memory_segment(struct memory_segment *seg)
+static int modify_pagetable(unsigned long start, unsigned long end, bool add,
+			    bool direct)
 {
-	struct memory_segment *tmp;
+	unsigned long addr, next;
+	int ret = -ENOMEM;
+	pgd_t *pgd;
+	p4d_t *p4d;
 
-	if (seg->start + seg->size > VMEM_MAX_PHYS ||
-	    seg->start + seg->size < seg->start)
-		return -ERANGE;
+	if (WARN_ON_ONCE(!PAGE_ALIGNED(start | end)))
+		return -EINVAL;
+	for (addr = start; addr < end; addr = next) {
+		next = pgd_addr_end(addr, end);
+		pgd = pgd_offset_k(addr);
 
-	list_for_each_entry(tmp, &mem_segs, list) {
-		if (seg->start >= tmp->start + tmp->size)
-			continue;
-		if (seg->start + seg->size <= tmp->start)
-			continue;
-		return -ENOSPC;
+		if (!add) {
+			if (pgd_none(*pgd))
+				continue;
+		} else if (pgd_none(*pgd)) {
+			p4d = vmem_crst_alloc(_REGION2_ENTRY_EMPTY);
+			if (!p4d)
+				goto out;
+			pgd_populate(&init_mm, pgd, p4d);
+		}
+		ret = modify_p4d_table(pgd, addr, next, add, direct);
+		if (ret)
+			goto out;
+		if (!add)
+			try_free_p4d_table(pgd, addr & PGDIR_MASK);
 	}
-	list_add(&seg->list, &mem_segs);
-	return 0;
+	ret = 0;
+out:
+	if (!add)
+		flush_tlb_kernel_range(start, end);
+	return ret;
+}
+
+static int add_pagetable(unsigned long start, unsigned long end, bool direct)
+{
+	return modify_pagetable(start, end, true, direct);
+}
+
+static int remove_pagetable(unsigned long start, unsigned long end, bool direct)
+{
+	return modify_pagetable(start, end, false, direct);
 }
 
 /*
- * Remove memory segment from the segment list.
+ * Add a physical memory range to the 1:1 mapping.
  */
-static void remove_memory_segment(struct memory_segment *seg)
+static int vmem_add_range(unsigned long start, unsigned long size)
 {
-	list_del(&seg->list);
+	return add_pagetable(start, start + size, true);
 }
 
-static void __remove_shared_memory(struct memory_segment *seg)
+/*
+ * Remove a physical memory range from the 1:1 mapping.
+ */
+static void vmem_remove_range(unsigned long start, unsigned long size)
 {
-	remove_memory_segment(seg);
-	vmem_remove_range(seg->start, seg->size);
+	remove_pagetable(start, start + size, true);
 }
 
-int vmem_remove_mapping(unsigned long start, unsigned long size)
+/*
+ * Add a backed mem_map array to the virtual mem_map array.
+ */
+int __meminit vmemmap_populate(unsigned long start, unsigned long end, int node,
+			       struct vmem_altmap *altmap)
 {
-	struct memory_segment *seg;
 	int ret;
 
 	mutex_lock(&vmem_mutex);
+	/* We don't care about the node, just use NUMA_NO_NODE on allocations */
+	ret = add_pagetable(start, end, false);
+	if (ret)
+		remove_pagetable(start, end, false);
+	mutex_unlock(&vmem_mutex);
+	return ret;
+}
 
-	ret = -ENOENT;
-	list_for_each_entry(seg, &mem_segs, list) {
-		if (seg->start == start && seg->size == size)
-			break;
-	}
-
-	if (seg->start != start || seg->size != size)
-		goto out;
+void vmemmap_free(unsigned long start, unsigned long end,
+		  struct vmem_altmap *altmap)
+{
+	mutex_lock(&vmem_mutex);
+	remove_pagetable(start, end, false);
+	mutex_unlock(&vmem_mutex);
+}
 
-	ret = 0;
-	__remove_shared_memory(seg);
-	kfree(seg);
-out:
+void vmem_remove_mapping(unsigned long start, unsigned long size)
+{
+	mutex_lock(&vmem_mutex);
+	vmem_remove_range(start, size);
 	mutex_unlock(&vmem_mutex);
-	return ret;
 }
 
 int vmem_add_mapping(unsigned long start, unsigned long size)
 {
-	struct memory_segment *seg;
 	int ret;
 
-	mutex_lock(&vmem_mutex);
-	ret = -ENOMEM;
-	seg = kzalloc(sizeof(*seg), GFP_KERNEL);
-	if (!seg)
-		goto out;
-	seg->start = start;
-	seg->size = size;
-
-	ret = insert_memory_segment(seg);
-	if (ret)
-		goto out_free;
+	if (start + size > VMEM_MAX_PHYS ||
+	    start + size < start)
+		return -ERANGE;
 
-	ret = vmem_add_mem(start, size);
+	mutex_lock(&vmem_mutex);
+	ret = vmem_add_range(start, size);
 	if (ret)
-		goto out_remove;
-	goto out;
-
-out_remove:
-	__remove_shared_memory(seg);
-out_free:
-	kfree(seg);
-out:
+		vmem_remove_range(start, size);
 	mutex_unlock(&vmem_mutex);
 	return ret;
 }
@@ -402,7 +557,7 @@ void __init vmem_map_init(void)
 	struct memblock_region *reg;
 
 	for_each_memblock(memory, reg)
-		vmem_add_mem(reg->base, reg->size);
+		vmem_add_range(reg->base, reg->size);
 	__set_memory((unsigned long)_stext,
 		     (unsigned long)(_etext - _stext) >> PAGE_SHIFT,
 		     SET_MEMORY_RO | SET_MEMORY_X);
@@ -421,27 +576,3 @@ void __init vmem_map_init(void)
 	pr_info("Write protected kernel read-only data: %luk\n",
 		(unsigned long)(__end_rodata - _stext) >> 10);
 }
-
-/*
- * Convert memblock.memory  to a memory segment list so there is a single
- * list that contains all memory segments.
- */
-static int __init vmem_convert_memory_chunk(void)
-{
-	struct memblock_region *reg;
-	struct memory_segment *seg;
-
-	mutex_lock(&vmem_mutex);
-	for_each_memblock(memory, reg) {
-		seg = kzalloc(sizeof(*seg), GFP_KERNEL);
-		if (!seg)
-			panic("Out of memory...\n");
-		seg->start = reg->base;
-		seg->size = reg->size;
-		insert_memory_segment(seg);
-	}
-	mutex_unlock(&vmem_mutex);
-	return 0;
-}
-
-core_initcall(vmem_convert_memory_chunk);
diff --git a/arch/s390/net/bpf_jit_comp.c b/arch/s390/net/bpf_jit_comp.c
index f4242b894cf2..8fe7bdfc8d15 100644
--- a/arch/s390/net/bpf_jit_comp.c
+++ b/arch/s390/net/bpf_jit_comp.c
@@ -49,6 +49,7 @@ struct bpf_jit {
 	int r1_thunk_ip;	/* Address of expoline thunk for 'br %r1' */
 	int r14_thunk_ip;	/* Address of expoline thunk for 'br %r14' */
 	int tail_call_start;	/* Tail call start offset */
+	int excnt;		/* Number of exception table entries */
 	int labels[1];		/* Labels for local jumps */
 };
 
@@ -588,6 +589,84 @@ static void bpf_jit_epilogue(struct bpf_jit *jit, u32 stack_depth)
 	}
 }
 
+static int get_probe_mem_regno(const u8 *insn)
+{
+	/*
+	 * insn must point to llgc, llgh, llgf or lg, which have destination
+	 * register at the same position.
+	 */
+	if (insn[0] != 0xe3) /* common llgc, llgh, llgf and lg prefix */
+		return -1;
+	if (insn[5] != 0x90 && /* llgc */
+	    insn[5] != 0x91 && /* llgh */
+	    insn[5] != 0x16 && /* llgf */
+	    insn[5] != 0x04) /* lg */
+		return -1;
+	return insn[1] >> 4;
+}
+
+static bool ex_handler_bpf(const struct exception_table_entry *x,
+			   struct pt_regs *regs)
+{
+	int regno;
+	u8 *insn;
+
+	regs->psw.addr = extable_fixup(x);
+	insn = (u8 *)__rewind_psw(regs->psw, regs->int_code >> 16);
+	regno = get_probe_mem_regno(insn);
+	if (WARN_ON_ONCE(regno < 0))
+		/* JIT bug - unexpected instruction. */
+		return false;
+	regs->gprs[regno] = 0;
+	return true;
+}
+
+static int bpf_jit_probe_mem(struct bpf_jit *jit, struct bpf_prog *fp,
+			     int probe_prg, int nop_prg)
+{
+	struct exception_table_entry *ex;
+	s64 delta;
+	u8 *insn;
+	int prg;
+	int i;
+
+	if (!fp->aux->extable)
+		/* Do nothing during early JIT passes. */
+		return 0;
+	insn = jit->prg_buf + probe_prg;
+	if (WARN_ON_ONCE(get_probe_mem_regno(insn) < 0))
+		/* JIT bug - unexpected probe instruction. */
+		return -1;
+	if (WARN_ON_ONCE(probe_prg + insn_length(*insn) != nop_prg))
+		/* JIT bug - gap between probe and nop instructions. */
+		return -1;
+	for (i = 0; i < 2; i++) {
+		if (WARN_ON_ONCE(jit->excnt >= fp->aux->num_exentries))
+			/* Verifier bug - not enough entries. */
+			return -1;
+		ex = &fp->aux->extable[jit->excnt];
+		/* Add extable entries for probe and nop instructions. */
+		prg = i == 0 ? probe_prg : nop_prg;
+		delta = jit->prg_buf + prg - (u8 *)&ex->insn;
+		if (WARN_ON_ONCE(delta < INT_MIN || delta > INT_MAX))
+			/* JIT bug - code and extable must be close. */
+			return -1;
+		ex->insn = delta;
+		/*
+		 * Always land on the nop. Note that extable infrastructure
+		 * ignores fixup field, it is handled by ex_handler_bpf().
+		 */
+		delta = jit->prg_buf + nop_prg - (u8 *)&ex->fixup;
+		if (WARN_ON_ONCE(delta < INT_MIN || delta > INT_MAX))
+			/* JIT bug - landing pad and extable must be close. */
+			return -1;
+		ex->fixup = delta;
+		ex->handler = (u8 *)ex_handler_bpf - (u8 *)&ex->handler;
+		jit->excnt++;
+	}
+	return 0;
+}
+
 /*
  * Compile one eBPF instruction into s390x code
  *
@@ -604,7 +683,14 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp,
 	u32 *addrs = jit->addrs;
 	s32 imm = insn->imm;
 	s16 off = insn->off;
+	int probe_prg = -1;
 	unsigned int mask;
+	int nop_prg;
+	int err;
+
+	if (BPF_CLASS(insn->code) == BPF_LDX &&
+	    BPF_MODE(insn->code) == BPF_PROBE_MEM)
+		probe_prg = jit->prg;
 
 	switch (insn->code) {
 	/*
@@ -1119,6 +1205,7 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp,
 	 * BPF_LDX
 	 */
 	case BPF_LDX | BPF_MEM | BPF_B: /* dst = *(u8 *)(ul) (src + off) */
+	case BPF_LDX | BPF_PROBE_MEM | BPF_B:
 		/* llgc %dst,0(off,%src) */
 		EMIT6_DISP_LH(0xe3000000, 0x0090, dst_reg, src_reg, REG_0, off);
 		jit->seen |= SEEN_MEM;
@@ -1126,6 +1213,7 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp,
 			insn_count = 2;
 		break;
 	case BPF_LDX | BPF_MEM | BPF_H: /* dst = *(u16 *)(ul) (src + off) */
+	case BPF_LDX | BPF_PROBE_MEM | BPF_H:
 		/* llgh %dst,0(off,%src) */
 		EMIT6_DISP_LH(0xe3000000, 0x0091, dst_reg, src_reg, REG_0, off);
 		jit->seen |= SEEN_MEM;
@@ -1133,6 +1221,7 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp,
 			insn_count = 2;
 		break;
 	case BPF_LDX | BPF_MEM | BPF_W: /* dst = *(u32 *)(ul) (src + off) */
+	case BPF_LDX | BPF_PROBE_MEM | BPF_W:
 		/* llgf %dst,off(%src) */
 		jit->seen |= SEEN_MEM;
 		EMIT6_DISP_LH(0xe3000000, 0x0016, dst_reg, src_reg, REG_0, off);
@@ -1140,6 +1229,7 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp,
 			insn_count = 2;
 		break;
 	case BPF_LDX | BPF_MEM | BPF_DW: /* dst = *(u64 *)(ul) (src + off) */
+	case BPF_LDX | BPF_PROBE_MEM | BPF_DW:
 		/* lg %dst,0(off,%src) */
 		jit->seen |= SEEN_MEM;
 		EMIT6_DISP_LH(0xe3000000, 0x0004, dst_reg, src_reg, REG_0, off);
@@ -1485,6 +1575,23 @@ branch_oc:
 		pr_err("Unknown opcode %02x\n", insn->code);
 		return -1;
 	}
+
+	if (probe_prg != -1) {
+		/*
+		 * Handlers of certain exceptions leave psw.addr pointing to
+		 * the instruction directly after the failing one. Therefore,
+		 * create two exception table entries and also add a nop in
+		 * case two probing instructions come directly after each
+		 * other.
+		 */
+		nop_prg = jit->prg;
+		/* bcr 0,%0 */
+		_EMIT2(0x0700);
+		err = bpf_jit_probe_mem(jit, fp, probe_prg, nop_prg);
+		if (err < 0)
+			return err;
+	}
+
 	return insn_count;
 }
 
@@ -1527,6 +1634,7 @@ static int bpf_jit_prog(struct bpf_jit *jit, struct bpf_prog *fp,
 	jit->lit32 = jit->lit32_start;
 	jit->lit64 = jit->lit64_start;
 	jit->prg = 0;
+	jit->excnt = 0;
 
 	bpf_jit_prologue(jit, stack_depth);
 	if (bpf_set_addr(jit, 0) < 0)
@@ -1551,6 +1659,12 @@ static int bpf_jit_prog(struct bpf_jit *jit, struct bpf_prog *fp,
 		jit->lit64_start = ALIGN(jit->lit64_start, 8);
 	jit->size = jit->lit64_start + lit64_size;
 	jit->size_prg = jit->prg;
+
+	if (WARN_ON_ONCE(fp->aux->extable &&
+			 jit->excnt != fp->aux->num_exentries))
+		/* Verifier bug - too many entries. */
+		return -1;
+
 	return 0;
 }
 
@@ -1565,6 +1679,29 @@ struct s390_jit_data {
 	int pass;
 };
 
+static struct bpf_binary_header *bpf_jit_alloc(struct bpf_jit *jit,
+					       struct bpf_prog *fp)
+{
+	struct bpf_binary_header *header;
+	u32 extable_size;
+	u32 code_size;
+
+	/* We need two entries per insn. */
+	fp->aux->num_exentries *= 2;
+
+	code_size = roundup(jit->size,
+			    __alignof__(struct exception_table_entry));
+	extable_size = fp->aux->num_exentries *
+		sizeof(struct exception_table_entry);
+	header = bpf_jit_binary_alloc(code_size + extable_size, &jit->prg_buf,
+				      8, jit_fill_hole);
+	if (!header)
+		return NULL;
+	fp->aux->extable = (struct exception_table_entry *)
+		(jit->prg_buf + code_size);
+	return header;
+}
+
 /*
  * Compile eBPF program "fp"
  */
@@ -1631,7 +1768,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp)
 	/*
 	 * Final pass: Allocate and generate program
 	 */
-	header = bpf_jit_binary_alloc(jit.size, &jit.prg_buf, 8, jit_fill_hole);
+	header = bpf_jit_alloc(&jit, fp);
 	if (!header) {
 		fp = orig_fp;
 		goto free_addrs;
diff --git a/arch/s390/pci/pci_event.c b/arch/s390/pci/pci_event.c
index 08e1d619398e..fdebd286f402 100644
--- a/arch/s390/pci/pci_event.c
+++ b/arch/s390/pci/pci_event.c
@@ -94,7 +94,18 @@ static void __zpci_event_availability(struct zpci_ccdf_avail *ccdf)
 		}
 		zdev->fh = ccdf->fh;
 		zdev->state = ZPCI_FN_STATE_CONFIGURED;
-		zpci_create_device(zdev);
+		ret = zpci_enable_device(zdev);
+		if (ret)
+			break;
+
+		pdev = pci_scan_single_device(zdev->zbus->bus, zdev->devfn);
+		if (!pdev)
+			break;
+
+		pci_bus_add_device(pdev);
+		pci_lock_rescan_remove();
+		pci_bus_add_devices(zdev->zbus->bus);
+		pci_unlock_rescan_remove();
 		break;
 	case 0x0302: /* Reserved -> Standby */
 		if (!zdev) {
diff --git a/arch/s390/pci/pci_mmio.c b/arch/s390/pci/pci_mmio.c
index 38efa3e852c4..401cf670a243 100644
--- a/arch/s390/pci/pci_mmio.c
+++ b/arch/s390/pci/pci_mmio.c
@@ -155,10 +155,12 @@ SYSCALL_DEFINE3(s390_pci_mmio_write, unsigned long, mmio_addr,
 		return -EINVAL;
 
 	/*
-	 * Only support read access to MIO capable devices on a MIO enabled
-	 * system. Otherwise we would have to check for every address if it is
-	 * a special ZPCI_ADDR and we would have to do a get_pfn() which we
-	 * don't need for MIO capable devices.
+	 * We only support write access to MIO capable devices if we are on
+	 * a MIO enabled system. Otherwise we would have to check for every
+	 * address if it is a special ZPCI_ADDR and would have to do
+	 * a get_pfn() which we don't need for MIO capable devices.  Currently
+	 * ISM devices are the only devices without MIO support and there is no
+	 * known need for accessing these from userspace.
 	 */
 	if (static_branch_likely(&have_mio)) {
 		ret = __memcpy_toio_inuser((void  __iomem *) mmio_addr,
@@ -282,10 +284,12 @@ SYSCALL_DEFINE3(s390_pci_mmio_read, unsigned long, mmio_addr,
 		return -EINVAL;
 
 	/*
-	 * Only support write access to MIO capable devices on a MIO enabled
-	 * system. Otherwise we would have to check for every address if it is
-	 * a special ZPCI_ADDR and we would have to do a get_pfn() which we
-	 * don't need for MIO capable devices.
+	 * We only support read access to MIO capable devices if we are on
+	 * a MIO enabled system. Otherwise we would have to check for every
+	 * address if it is a special ZPCI_ADDR and would have to do
+	 * a get_pfn() which we don't need for MIO capable devices.  Currently
+	 * ISM devices are the only devices without MIO support and there is no
+	 * known need for accessing these from userspace.
 	 */
 	if (static_branch_likely(&have_mio)) {
 		ret = __memcpy_fromio_inuser(
diff --git a/arch/sh/include/asm/atomic.h b/arch/sh/include/asm/atomic.h
index f37b95a80232..7c2a8a703b9a 100644
--- a/arch/sh/include/asm/atomic.h
+++ b/arch/sh/include/asm/atomic.h
@@ -19,8 +19,6 @@
 #include <asm/cmpxchg.h>
 #include <asm/barrier.h>
 
-#define ATOMIC_INIT(i)	{ (i) }
-
 #define atomic_read(v)		READ_ONCE((v)->counter)
 #define atomic_set(v,i)		WRITE_ONCE((v)->counter, (i))
 
diff --git a/arch/sh/include/asm/pgalloc.h b/arch/sh/include/asm/pgalloc.h
index 22d968bfe9bb..d770da3f8b6f 100644
--- a/arch/sh/include/asm/pgalloc.h
+++ b/arch/sh/include/asm/pgalloc.h
@@ -12,6 +12,7 @@ extern void pgd_free(struct mm_struct *mm, pgd_t *pgd);
 extern void pud_populate(struct mm_struct *mm, pud_t *pudp, pmd_t *pmd);
 extern pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address);
 extern void pmd_free(struct mm_struct *mm, pmd_t *pmd);
+#define __pmd_free_tlb(tlb, pmdp, addr)		pmd_free((tlb)->mm, (pmdp))
 #endif
 
 static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd,
@@ -33,13 +34,4 @@ do {							\
 	tlb_remove_page((tlb), (pte));			\
 } while (0)
 
-#if CONFIG_PGTABLE_LEVELS > 2
-#define __pmd_free_tlb(tlb, pmdp, addr)			\
-do {							\
-	struct page *page = virt_to_page(pmdp);		\
-	pgtable_pmd_page_dtor(page);			\
-	tlb_remove_page((tlb), page);			\
-} while (0);
-#endif
-
 #endif /* __ASM_SH_PGALLOC_H */
diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S
index 956a7a03b0c8..9bac5bbb67f3 100644
--- a/arch/sh/kernel/entry-common.S
+++ b/arch/sh/kernel/entry-common.S
@@ -199,7 +199,7 @@ syscall_trace_entry:
 	mov.l	@(OFF_R7,r15), r7   ! arg3
 	mov.l	@(OFF_R3,r15), r3   ! syscall_nr
 	!
-	mov.l	2f, r10			! Number of syscalls
+	mov.l	6f, r10			! Number of syscalls
 	cmp/hs	r10, r3
 	bf	syscall_call
 	mov	#-ENOSYS, r0
@@ -353,7 +353,7 @@ ENTRY(system_call)
 	tst	r9, r8
 	bf	syscall_trace_entry
 	!
-	mov.l	2f, r8			! Number of syscalls
+	mov.l	6f, r8			! Number of syscalls
 	cmp/hs	r8, r3
 	bt	syscall_badsys
 	!
@@ -392,7 +392,7 @@ syscall_exit:
 #if !defined(CONFIG_CPU_SH2)
 1:	.long	TRA
 #endif
-2:	.long	NR_syscalls
+6:	.long	NR_syscalls
 3:	.long	sys_call_table
 7:	.long	do_syscall_trace_enter
 8:	.long	do_syscall_trace_leave
diff --git a/arch/sh/kernel/ftrace.c b/arch/sh/kernel/ftrace.c
index 1b04270e5460..0646c5961846 100644
--- a/arch/sh/kernel/ftrace.c
+++ b/arch/sh/kernel/ftrace.c
@@ -119,7 +119,7 @@ static void ftrace_mod_code(void)
 	 * But if one were to fail, then they all should, and if one were
 	 * to succeed, then they all should.
 	 */
-	mod_code_status = probe_kernel_write(mod_code_ip, mod_code_newcode,
+	mod_code_status = copy_to_kernel_nofault(mod_code_ip, mod_code_newcode,
 					     MCOUNT_INSN_SIZE);
 
 	/* if we fail, then kill any new writers */
@@ -203,7 +203,7 @@ static int ftrace_modify_code(unsigned long ip, unsigned char *old_code,
 	 */
 
 	/* read the text we want to modify */
-	if (probe_kernel_read(replaced, (void *)ip, MCOUNT_INSN_SIZE))
+	if (copy_from_kernel_nofault(replaced, (void *)ip, MCOUNT_INSN_SIZE))
 		return -EFAULT;
 
 	/* Make sure it is what we expect it to be */
@@ -268,7 +268,7 @@ static int ftrace_mod(unsigned long ip, unsigned long old_addr,
 {
 	unsigned char code[MCOUNT_INSN_SIZE];
 
-	if (probe_kernel_read(code, (void *)ip, MCOUNT_INSN_SIZE))
+	if (copy_from_kernel_nofault(code, (void *)ip, MCOUNT_INSN_SIZE))
 		return -EFAULT;
 
 	if (old_addr != __raw_readl((unsigned long *)code))
diff --git a/arch/sh/kernel/process_32.c b/arch/sh/kernel/process_32.c
index 456cc8d171f7..b0fefd8f53a6 100644
--- a/arch/sh/kernel/process_32.c
+++ b/arch/sh/kernel/process_32.c
@@ -115,8 +115,8 @@ EXPORT_SYMBOL(dump_fpu);
 asmlinkage void ret_from_fork(void);
 asmlinkage void ret_from_kernel_thread(void);
 
-int copy_thread(unsigned long clone_flags, unsigned long usp,
-		unsigned long arg, struct task_struct *p)
+int copy_thread(unsigned long clone_flags, unsigned long usp, unsigned long arg,
+		struct task_struct *p, unsigned long tls)
 {
 	struct thread_info *ti = task_thread_info(p);
 	struct pt_regs *childregs;
@@ -158,7 +158,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 	ti->addr_limit = USER_DS;
 
 	if (clone_flags & CLONE_SETTLS)
-		childregs->gbr = childregs->regs[0];
+		childregs->gbr = tls;
 
 	childregs->regs[0] = 0; /* Set return value for child */
 	p->thread.pc = (unsigned long) ret_from_fork;
diff --git a/arch/sh/kernel/syscalls/syscall.tbl b/arch/sh/kernel/syscalls/syscall.tbl
index acc35daa1b79..96848db9659e 100644
--- a/arch/sh/kernel/syscalls/syscall.tbl
+++ b/arch/sh/kernel/syscalls/syscall.tbl
@@ -438,6 +438,7 @@
 433	common	fspick				sys_fspick
 434	common	pidfd_open			sys_pidfd_open
 # 435 reserved for clone3
+436	common	close_range			sys_close_range
 437	common	openat2				sys_openat2
 438	common	pidfd_getfd			sys_pidfd_getfd
 439	common	faccessat2			sys_faccessat2
diff --git a/arch/sh/kernel/traps.c b/arch/sh/kernel/traps.c
index a33025451fcd..9c3d32b80038 100644
--- a/arch/sh/kernel/traps.c
+++ b/arch/sh/kernel/traps.c
@@ -118,7 +118,7 @@ int is_valid_bugaddr(unsigned long addr)
 
 	if (addr < PAGE_OFFSET)
 		return 0;
-	if (probe_kernel_address((insn_size_t *)addr, opcode))
+	if (get_kernel_nofault(opcode, (insn_size_t *)addr))
 		return 0;
 	if (opcode == TRAPA_BUG_OPCODE)
 		return 1;
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 5bf2dc163540..efeff2c896a5 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -15,6 +15,7 @@ config SPARC
 	default y
 	select ARCH_MIGHT_HAVE_PC_PARPORT if SPARC64 && PCI
 	select ARCH_MIGHT_HAVE_PC_SERIO
+	select DMA_OPS
 	select OF
 	select OF_PROMTREE
 	select HAVE_ASM_MODVERSIONS
@@ -80,7 +81,6 @@ config SPARC64
 	select RTC_DRV_STARFIRE
 	select HAVE_PERF_EVENTS
 	select PERF_USE_VMALLOC
-	select IRQ_PREFLOW_FASTEOI
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG
 	select HAVE_C_RECORDMCOUNT
 	select HAVE_ARCH_AUDITSYSCALL
diff --git a/arch/sparc/crypto/sha256_glue.c b/arch/sparc/crypto/sha256_glue.c
index 286bc8ecf15b..ca2547df9652 100644
--- a/arch/sparc/crypto/sha256_glue.c
+++ b/arch/sparc/crypto/sha256_glue.c
@@ -156,7 +156,7 @@ static int sha256_sparc64_import(struct shash_desc *desc, const void *in)
 	return 0;
 }
 
-static struct shash_alg sha256 = {
+static struct shash_alg sha256_alg = {
 	.digestsize	=	SHA256_DIGEST_SIZE,
 	.init		=	sha256_sparc64_init,
 	.update		=	sha256_sparc64_update,
@@ -174,7 +174,7 @@ static struct shash_alg sha256 = {
 	}
 };
 
-static struct shash_alg sha224 = {
+static struct shash_alg sha224_alg = {
 	.digestsize	=	SHA224_DIGEST_SIZE,
 	.init		=	sha224_sparc64_init,
 	.update		=	sha256_sparc64_update,
@@ -206,13 +206,13 @@ static bool __init sparc64_has_sha256_opcode(void)
 static int __init sha256_sparc64_mod_init(void)
 {
 	if (sparc64_has_sha256_opcode()) {
-		int ret = crypto_register_shash(&sha224);
+		int ret = crypto_register_shash(&sha224_alg);
 		if (ret < 0)
 			return ret;
 
-		ret = crypto_register_shash(&sha256);
+		ret = crypto_register_shash(&sha256_alg);
 		if (ret < 0) {
-			crypto_unregister_shash(&sha224);
+			crypto_unregister_shash(&sha224_alg);
 			return ret;
 		}
 
@@ -225,8 +225,8 @@ static int __init sha256_sparc64_mod_init(void)
 
 static void __exit sha256_sparc64_mod_fini(void)
 {
-	crypto_unregister_shash(&sha224);
-	crypto_unregister_shash(&sha256);
+	crypto_unregister_shash(&sha224_alg);
+	crypto_unregister_shash(&sha256_alg);
 }
 
 module_init(sha256_sparc64_mod_init);
diff --git a/arch/sparc/include/asm/atomic_32.h b/arch/sparc/include/asm/atomic_32.h
index 94c930f0bc62..efad5532f169 100644
--- a/arch/sparc/include/asm/atomic_32.h
+++ b/arch/sparc/include/asm/atomic_32.h
@@ -18,8 +18,6 @@
 #include <asm/barrier.h>
 #include <asm-generic/atomic64.h>
 
-#define ATOMIC_INIT(i)  { (i) }
-
 int atomic_add_return(int, atomic_t *);
 int atomic_fetch_add(int, atomic_t *);
 int atomic_fetch_and(int, atomic_t *);
diff --git a/arch/sparc/include/asm/atomic_64.h b/arch/sparc/include/asm/atomic_64.h
index b60448397d4f..6b235d3d1d9d 100644
--- a/arch/sparc/include/asm/atomic_64.h
+++ b/arch/sparc/include/asm/atomic_64.h
@@ -12,7 +12,6 @@
 #include <asm/cmpxchg.h>
 #include <asm/barrier.h>
 
-#define ATOMIC_INIT(i)		{ (i) }
 #define ATOMIC64_INIT(i)	{ (i) }
 
 #define atomic_read(v)		READ_ONCE((v)->counter)
diff --git a/arch/sparc/include/asm/percpu_64.h b/arch/sparc/include/asm/percpu_64.h
index 32ef6f05cc56..a8786a4b90b6 100644
--- a/arch/sparc/include/asm/percpu_64.h
+++ b/arch/sparc/include/asm/percpu_64.h
@@ -4,7 +4,9 @@
 
 #include <linux/compiler.h>
 
+#ifndef BUILD_VDSO
 register unsigned long __local_per_cpu_offset asm("g5");
+#endif
 
 #ifdef CONFIG_SMP
 
diff --git a/arch/sparc/include/asm/syscalls.h b/arch/sparc/include/asm/syscalls.h
index 1d819f5e21da..35575fbfb9dc 100644
--- a/arch/sparc/include/asm/syscalls.h
+++ b/arch/sparc/include/asm/syscalls.h
@@ -4,9 +4,8 @@
 
 struct pt_regs;
 
-asmlinkage long sparc_do_fork(unsigned long clone_flags,
-			      unsigned long stack_start,
-			      struct pt_regs *regs,
-			      unsigned long stack_size);
+asmlinkage long sparc_fork(struct pt_regs *regs);
+asmlinkage long sparc_vfork(struct pt_regs *regs);
+asmlinkage long sparc_clone(struct pt_regs *regs);
 
 #endif /* _SPARC64_SYSCALLS_H */
diff --git a/arch/sparc/include/asm/trap_block.h b/arch/sparc/include/asm/trap_block.h
index 0f6d0c4f6683..ace0d48e837e 100644
--- a/arch/sparc/include/asm/trap_block.h
+++ b/arch/sparc/include/asm/trap_block.h
@@ -2,6 +2,8 @@
 #ifndef _SPARC_TRAP_BLOCK_H
 #define _SPARC_TRAP_BLOCK_H
 
+#include <linux/threads.h>
+
 #include <asm/hypervisor.h>
 #include <asm/asi.h>
 
diff --git a/arch/sparc/kernel/Makefile b/arch/sparc/kernel/Makefile
index 97c0e19263d1..d3a0e072ebe8 100644
--- a/arch/sparc/kernel/Makefile
+++ b/arch/sparc/kernel/Makefile
@@ -33,6 +33,7 @@ obj-y                   += irq_$(BITS).o
 obj-$(CONFIG_SPARC32)   += sun4m_irq.o sun4d_irq.o
 
 obj-y                   += process_$(BITS).o
+obj-y                   += process.o
 obj-y                   += signal_$(BITS).o
 obj-y                   += sigutil_$(BITS).o
 obj-$(CONFIG_SPARC32)   += ioport.o
diff --git a/arch/sparc/kernel/entry.S b/arch/sparc/kernel/entry.S
index f636acf3312f..d58940280f8d 100644
--- a/arch/sparc/kernel/entry.S
+++ b/arch/sparc/kernel/entry.S
@@ -869,14 +869,11 @@ flush_patch_two:
 	ld	[%curptr + TI_TASK], %o4
 	rd	%psr, %g4
 	WRITE_PAUSE
-	mov	SIGCHLD, %o0			! arg0:	clone flags
 	rd	%wim, %g5
 	WRITE_PAUSE
-	mov	%fp, %o1			! arg1:	usp
 	std	%g4, [%o4 + AOFF_task_thread + AOFF_thread_fork_kpsr]
-	add	%sp, STACKFRAME_SZ, %o2		! arg2:	pt_regs ptr
-	mov	0, %o3
-	call	sparc_do_fork
+	add	%sp, STACKFRAME_SZ, %o0
+	call	sparc_fork
 	 mov	%l5, %o7
 
 	/* Whee, kernel threads! */
@@ -888,19 +885,11 @@ flush_patch_three:
 	ld	[%curptr + TI_TASK], %o4
 	rd	%psr, %g4
 	WRITE_PAUSE
-
-	/* arg0,1: flags,usp  -- loaded already */
-	cmp	%o1, 0x0			! Is new_usp NULL?
 	rd	%wim, %g5
 	WRITE_PAUSE
-	be,a	1f
-	 mov	%fp, %o1			! yes, use callers usp
-	andn	%o1, 7, %o1			! no, align to 8 bytes
-1:
 	std	%g4, [%o4 + AOFF_task_thread + AOFF_thread_fork_kpsr]
-	add	%sp, STACKFRAME_SZ, %o2		! arg2:	pt_regs ptr
-	mov	0, %o3
-	call	sparc_do_fork
+	add	%sp, STACKFRAME_SZ, %o0
+	call	sparc_clone
 	 mov	%l5, %o7
 
 	/* Whee, real vfork! */
@@ -914,13 +903,9 @@ flush_patch_four:
 	rd	%wim, %g5
 	WRITE_PAUSE
 	std	%g4, [%o4 + AOFF_task_thread + AOFF_thread_fork_kpsr]
-	sethi	%hi(0x4000 | 0x0100 | SIGCHLD), %o0
-	mov	%fp, %o1
-	or	%o0, %lo(0x4000 | 0x0100 | SIGCHLD), %o0
-	sethi	%hi(sparc_do_fork), %l1
-	mov	0, %o3
-	jmpl	%l1 + %lo(sparc_do_fork), %g0
-	 add	%sp, STACKFRAME_SZ, %o2
+	sethi	%hi(sparc_vfork), %l1
+	jmpl	%l1 + %lo(sparc_vfork), %g0
+	 add	%sp, STACKFRAME_SZ, %o0
 
         .align  4
 linux_sparc_ni_syscall:
diff --git a/arch/sparc/kernel/kernel.h b/arch/sparc/kernel/kernel.h
index f6f498ba3198..9cd09a3ef35f 100644
--- a/arch/sparc/kernel/kernel.h
+++ b/arch/sparc/kernel/kernel.h
@@ -14,6 +14,11 @@ extern const char *sparc_pmu_type;
 extern unsigned int fsr_storage;
 extern int ncpus_probed;
 
+/* process{_32,_64}.c */
+asmlinkage long sparc_clone(struct pt_regs *regs);
+asmlinkage long sparc_fork(struct pt_regs *regs);
+asmlinkage long sparc_vfork(struct pt_regs *regs);
+
 #ifdef CONFIG_SPARC64
 /* setup_64.c */
 struct seq_file;
@@ -153,12 +158,6 @@ void floppy_hardint(void);
 extern unsigned long sun4m_cpu_startup;
 extern unsigned long sun4d_cpu_startup;
 
-/* process_32.c */
-asmlinkage int sparc_do_fork(unsigned long clone_flags,
-                             unsigned long stack_start,
-                             struct pt_regs *regs,
-                             unsigned long stack_size);
-
 /* signal_32.c */
 asmlinkage void do_sigreturn(struct pt_regs *regs);
 asmlinkage void do_rt_sigreturn(struct pt_regs *regs);
diff --git a/arch/sparc/kernel/process.c b/arch/sparc/kernel/process.c
new file mode 100644
index 000000000000..5234b5ccc0b9
--- /dev/null
+++ b/arch/sparc/kernel/process.c
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/*
+ * This file handles the architecture independent parts of process handling..
+ */
+
+#include <linux/compat.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/ptrace.h>
+#include <linux/sched.h>
+#include <linux/sched/task.h>
+#include <linux/sched/task_stack.h>
+#include <linux/signal.h>
+
+#include "kernel.h"
+
+asmlinkage long sparc_fork(struct pt_regs *regs)
+{
+	unsigned long orig_i1 = regs->u_regs[UREG_I1];
+	long ret;
+	struct kernel_clone_args args = {
+		.exit_signal	= SIGCHLD,
+		/* Reuse the parent's stack for the child. */
+		.stack		= regs->u_regs[UREG_FP],
+	};
+
+	ret = _do_fork(&args);
+
+	/* If we get an error and potentially restart the system
+	 * call, we're screwed because copy_thread() clobbered
+	 * the parent's %o1.  So detect that case and restore it
+	 * here.
+	 */
+	if ((unsigned long)ret >= -ERESTART_RESTARTBLOCK)
+		regs->u_regs[UREG_I1] = orig_i1;
+
+	return ret;
+}
+
+asmlinkage long sparc_vfork(struct pt_regs *regs)
+{
+	unsigned long orig_i1 = regs->u_regs[UREG_I1];
+	long ret;
+
+	struct kernel_clone_args args = {
+		.flags		= CLONE_VFORK | CLONE_VM,
+		.exit_signal	= SIGCHLD,
+		/* Reuse the parent's stack for the child. */
+		.stack		= regs->u_regs[UREG_FP],
+	};
+
+	ret = _do_fork(&args);
+
+	/* If we get an error and potentially restart the system
+	 * call, we're screwed because copy_thread() clobbered
+	 * the parent's %o1.  So detect that case and restore it
+	 * here.
+	 */
+	if ((unsigned long)ret >= -ERESTART_RESTARTBLOCK)
+		regs->u_regs[UREG_I1] = orig_i1;
+
+	return ret;
+}
+
+asmlinkage long sparc_clone(struct pt_regs *regs)
+{
+	unsigned long orig_i1 = regs->u_regs[UREG_I1];
+	unsigned int flags = lower_32_bits(regs->u_regs[UREG_I0]);
+	long ret;
+
+	struct kernel_clone_args args = {
+		.flags		= (flags & ~CSIGNAL),
+		.exit_signal	= (flags & CSIGNAL),
+		.tls		= regs->u_regs[UREG_I3],
+	};
+
+#ifdef CONFIG_COMPAT
+	if (test_thread_flag(TIF_32BIT)) {
+		args.pidfd	= compat_ptr(regs->u_regs[UREG_I2]);
+		args.child_tid	= compat_ptr(regs->u_regs[UREG_I4]);
+		args.parent_tid	= compat_ptr(regs->u_regs[UREG_I2]);
+	} else
+#endif
+	{
+		args.pidfd	= (int __user *)regs->u_regs[UREG_I2];
+		args.child_tid	= (int __user *)regs->u_regs[UREG_I4];
+		args.parent_tid	= (int __user *)regs->u_regs[UREG_I2];
+	}
+
+	/* Did userspace give setup a separate stack for the child or are we
+	 * reusing the parent's?
+	 */
+	if (regs->u_regs[UREG_I1])
+		args.stack = regs->u_regs[UREG_I1];
+	else
+		args.stack = regs->u_regs[UREG_FP];
+
+	ret = _do_fork(&args);
+
+	/* If we get an error and potentially restart the system
+	 * call, we're screwed because copy_thread() clobbered
+	 * the parent's %o1.  So detect that case and restore it
+	 * here.
+	 */
+	if ((unsigned long)ret >= -ERESTART_RESTARTBLOCK)
+		regs->u_regs[UREG_I1] = orig_i1;
+
+	return ret;
+}
diff --git a/arch/sparc/kernel/process_32.c b/arch/sparc/kernel/process_32.c
index 13cb5638fab8..bd123f1de2e7 100644
--- a/arch/sparc/kernel/process_32.c
+++ b/arch/sparc/kernel/process_32.c
@@ -257,33 +257,6 @@ clone_stackframe(struct sparc_stackf __user *dst,
 	return sp;
 }
 
-asmlinkage int sparc_do_fork(unsigned long clone_flags,
-                             unsigned long stack_start,
-                             struct pt_regs *regs,
-                             unsigned long stack_size)
-{
-	unsigned long parent_tid_ptr, child_tid_ptr;
-	unsigned long orig_i1 = regs->u_regs[UREG_I1];
-	long ret;
-
-	parent_tid_ptr = regs->u_regs[UREG_I2];
-	child_tid_ptr = regs->u_regs[UREG_I4];
-
-	ret = do_fork(clone_flags, stack_start, stack_size,
-		      (int __user *) parent_tid_ptr,
-		      (int __user *) child_tid_ptr);
-
-	/* If we get an error and potentially restart the system
-	 * call, we're screwed because copy_thread() clobbered
-	 * the parent's %o1.  So detect that case and restore it
-	 * here.
-	 */
-	if ((unsigned long)ret >= -ERESTART_RESTARTBLOCK)
-		regs->u_regs[UREG_I1] = orig_i1;
-
-	return ret;
-}
-
 /* Copy a Sparc thread.  The fork() return value conventions
  * under SunOS are nothing short of bletcherous:
  * Parent -->  %o0 == childs  pid, %o1 == 0
@@ -300,8 +273,8 @@ asmlinkage int sparc_do_fork(unsigned long clone_flags,
 extern void ret_from_fork(void);
 extern void ret_from_kernel_thread(void);
 
-int copy_thread(unsigned long clone_flags, unsigned long sp,
-		unsigned long arg, struct task_struct *p)
+int copy_thread(unsigned long clone_flags, unsigned long sp, unsigned long arg,
+		struct task_struct *p, unsigned long tls)
 {
 	struct thread_info *ti = task_thread_info(p);
 	struct pt_regs *childregs, *regs = current_pt_regs();
@@ -403,7 +376,7 @@ int copy_thread(unsigned long clone_flags, unsigned long sp,
 	regs->u_regs[UREG_I1] = 0;
 
 	if (clone_flags & CLONE_SETTLS)
-		childregs->u_regs[UREG_G7] = regs->u_regs[UREG_I3];
+		childregs->u_regs[UREG_G7] = tls;
 
 	return 0;
 }
diff --git a/arch/sparc/kernel/process_64.c b/arch/sparc/kernel/process_64.c
index 54945eacd3b5..04ef19b88632 100644
--- a/arch/sparc/kernel/process_64.c
+++ b/arch/sparc/kernel/process_64.c
@@ -572,47 +572,13 @@ barf:
 	force_sig(SIGSEGV);
 }
 
-asmlinkage long sparc_do_fork(unsigned long clone_flags,
-			      unsigned long stack_start,
-			      struct pt_regs *regs,
-			      unsigned long stack_size)
-{
-	int __user *parent_tid_ptr, *child_tid_ptr;
-	unsigned long orig_i1 = regs->u_regs[UREG_I1];
-	long ret;
-
-#ifdef CONFIG_COMPAT
-	if (test_thread_flag(TIF_32BIT)) {
-		parent_tid_ptr = compat_ptr(regs->u_regs[UREG_I2]);
-		child_tid_ptr = compat_ptr(regs->u_regs[UREG_I4]);
-	} else
-#endif
-	{
-		parent_tid_ptr = (int __user *) regs->u_regs[UREG_I2];
-		child_tid_ptr = (int __user *) regs->u_regs[UREG_I4];
-	}
-
-	ret = do_fork(clone_flags, stack_start, stack_size,
-		      parent_tid_ptr, child_tid_ptr);
-
-	/* If we get an error and potentially restart the system
-	 * call, we're screwed because copy_thread() clobbered
-	 * the parent's %o1.  So detect that case and restore it
-	 * here.
-	 */
-	if ((unsigned long)ret >= -ERESTART_RESTARTBLOCK)
-		regs->u_regs[UREG_I1] = orig_i1;
-
-	return ret;
-}
-
 /* Copy a Sparc thread.  The fork() return value conventions
  * under SunOS are nothing short of bletcherous:
  * Parent -->  %o0 == childs  pid, %o1 == 0
  * Child  -->  %o0 == parents pid, %o1 == 1
  */
-int copy_thread(unsigned long clone_flags, unsigned long sp,
-		unsigned long arg, struct task_struct *p)
+int copy_thread(unsigned long clone_flags, unsigned long sp, unsigned long arg,
+		struct task_struct *p, unsigned long tls)
 {
 	struct thread_info *t = task_thread_info(p);
 	struct pt_regs *regs = current_pt_regs();
@@ -670,7 +636,7 @@ int copy_thread(unsigned long clone_flags, unsigned long sp,
 	regs->u_regs[UREG_I1] = 0;
 
 	if (clone_flags & CLONE_SETTLS)
-		t->kregs->u_regs[UREG_G7] = regs->u_regs[UREG_I3];
+		t->kregs->u_regs[UREG_G7] = tls;
 
 	return 0;
 }
diff --git a/arch/sparc/kernel/syscalls.S b/arch/sparc/kernel/syscalls.S
index db42b4fb3708..0e8ab0602c36 100644
--- a/arch/sparc/kernel/syscalls.S
+++ b/arch/sparc/kernel/syscalls.S
@@ -86,19 +86,22 @@ sys32_rt_sigreturn:
 	 * during system calls...
 	 */
 	.align	32
-sys_vfork: /* Under Linux, vfork and fork are just special cases of clone. */
-	sethi	%hi(0x4000 | 0x0100 | SIGCHLD), %o0
-	or	%o0, %lo(0x4000 | 0x0100 | SIGCHLD), %o0
-	ba,pt	%xcc, sys_clone
+sys_vfork:
+	flushw
+	ba,pt	%xcc, sparc_vfork
+	 add	%sp, PTREGS_OFF, %o0
+
+	.align	32
 sys_fork:
-	 clr	%o1
-	mov	SIGCHLD, %o0
+	flushw
+	ba,pt	%xcc, sparc_fork
+	 add	%sp, PTREGS_OFF, %o0
+
+	.align	32
 sys_clone:
 	flushw
-	movrz	%o1, %fp, %o1
-	mov	0, %o3
-	ba,pt	%xcc, sparc_do_fork
-	 add	%sp, PTREGS_OFF, %o2
+	ba,pt	%xcc, sparc_clone
+	 add	%sp, PTREGS_OFF, %o0
 
 	.globl	ret_from_fork
 ret_from_fork:
diff --git a/arch/sparc/kernel/syscalls/syscall.tbl b/arch/sparc/kernel/syscalls/syscall.tbl
index 8004a276cb74..d6447d08c9a1 100644
--- a/arch/sparc/kernel/syscalls/syscall.tbl
+++ b/arch/sparc/kernel/syscalls/syscall.tbl
@@ -481,6 +481,7 @@
 433	common	fspick				sys_fspick
 434	common	pidfd_open			sys_pidfd_open
 # 435 reserved for clone3
+436	common	close_range			sys_close_range
 437	common	openat2			sys_openat2
 438	common	pidfd_getfd			sys_pidfd_getfd
 439	common	faccessat2			sys_faccessat2
diff --git a/arch/um/Kconfig b/arch/um/Kconfig
index 9318dc6d1a0c..ef69be17ff70 100644
--- a/arch/um/Kconfig
+++ b/arch/um/Kconfig
@@ -14,7 +14,6 @@ config UML
 	select HAVE_FUTEX_CMPXCHG if FUTEX
 	select HAVE_DEBUG_KMEMLEAK
 	select HAVE_DEBUG_BUGVERBOSE
-	select HAVE_COPY_THREAD_TLS
 	select GENERIC_IRQ_SHOW
 	select GENERIC_CPU_DEVICES
 	select GENERIC_CLOCKEVENTS
diff --git a/arch/um/kernel/maccess.c b/arch/um/kernel/maccess.c
index e929c0966696..8ccd56813f68 100644
--- a/arch/um/kernel/maccess.c
+++ b/arch/um/kernel/maccess.c
@@ -7,7 +7,7 @@
 #include <linux/kernel.h>
 #include <os.h>
 
-bool probe_kernel_read_allowed(const void *src, size_t size)
+bool copy_from_kernel_nofault_allowed(const void *src, size_t size)
 {
 	void *psrc = (void *)rounddown((unsigned long)src, PAGE_SIZE);
 
diff --git a/arch/um/kernel/process.c b/arch/um/kernel/process.c
index e3a2cf92a373..26b5e243d3fc 100644
--- a/arch/um/kernel/process.c
+++ b/arch/um/kernel/process.c
@@ -152,7 +152,7 @@ void fork_handler(void)
 	userspace(&current->thread.regs.regs, current_thread_info()->aux_fp_regs);
 }
 
-int copy_thread_tls(unsigned long clone_flags, unsigned long sp,
+int copy_thread(unsigned long clone_flags, unsigned long sp,
 		unsigned long arg, struct task_struct * p, unsigned long tls)
 {
 	void (*handler)(void);
diff --git a/arch/unicore32/.gitignore b/arch/unicore32/.gitignore
deleted file mode 100644
index e82f3fb57ba0..000000000000
--- a/arch/unicore32/.gitignore
+++ /dev/null
@@ -1,22 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Generated include files
-#
-include/generated
-#
-# Generated ld script file
-#
-kernel/vmlinux.lds
-#
-# Generated images in boot
-#
-boot/Image
-boot/zImage
-boot/uImage
-#
-# Generated files in boot/compressed
-#
-boot/compressed/piggy.S
-boot/compressed/piggy.gzip
-boot/compressed/vmlinux
-boot/compressed/vmlinux.lds
diff --git a/arch/unicore32/Kconfig b/arch/unicore32/Kconfig
deleted file mode 100644
index 11ba1839d198..000000000000
--- a/arch/unicore32/Kconfig
+++ /dev/null
@@ -1,200 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-config UNICORE32
-	def_bool y
-	select ARCH_32BIT_OFF_T
-	select ARCH_HAS_DEVMEM_IS_ALLOWED
-	select ARCH_HAS_KEEPINITRD
-	select ARCH_MIGHT_HAVE_PC_PARPORT
-	select ARCH_MIGHT_HAVE_PC_SERIO
-	select HAVE_KERNEL_GZIP
-	select HAVE_KERNEL_BZIP2
-	select GENERIC_ATOMIC64
-	select HAVE_KERNEL_LZO
-	select HAVE_KERNEL_LZMA
-	select HAVE_PCI
-	select VIRT_TO_BUS
-	select ARCH_HAVE_CUSTOM_GPIO_H
-	select GENERIC_FIND_FIRST_BIT
-	select GENERIC_IRQ_PROBE
-	select GENERIC_IRQ_SHOW
-	select ARCH_WANT_FRAME_POINTERS
-	select GENERIC_IOMAP
-	select MODULES_USE_ELF_REL
-	select NEED_DMA_MAP_STATE
-	select MMU_GATHER_NO_RANGE if MMU
-	help
-	  UniCore-32 is 32-bit Instruction Set Architecture,
-	  including a series of low-power-consumption RISC chip
-	  designs licensed by PKUnity Ltd.
-	  Please see web page at <http://www.pkunity.com/>.
-
-config GENERIC_CSUM
-	def_bool y
-
-config NO_IOPORT_MAP
-	bool
-
-config STACKTRACE_SUPPORT
-	def_bool y
-
-config LOCKDEP_SUPPORT
-	def_bool y
-
-config ARCH_HAS_ILOG2_U32
-	bool
-
-config ARCH_HAS_ILOG2_U64
-	bool
-
-config GENERIC_HWEIGHT
-	def_bool y
-
-config GENERIC_CALIBRATE_DELAY
-	def_bool y
-
-config ARCH_MAY_HAVE_PC_FDC
-	bool
-
-config ZONE_DMA
-	def_bool y
-
-menu "System Type"
-
-config MMU
-	def_bool y
-
-config ARCH_FPGA
-	bool
-
-config ARCH_PUV3
-	def_bool y
-	select CPU_UCV2
-	select GENERIC_CLOCKEVENTS
-	select HAVE_LEGACY_CLK
-	select GPIOLIB
-
-# CONFIGs for ARCH_PUV3
-
-if ARCH_PUV3
-
-choice
-	prompt "Board Selection"
-	default PUV3_DB0913
-
-config PUV3_FPGA_DLX200
-	select ARCH_FPGA
-	bool "FPGA board"
-
-config PUV3_DB0913
-	bool "DEBUG board (0913)"
-
-config PUV3_NB0916
-	bool "NetBook board (0916)"
-	select PWM
-	select PWM_PUV3
-
-config PUV3_SMW0919
-	bool "Security Mini-Workstation board (0919)"
-
-endchoice
-
-config PUV3_PM
-	def_bool y if !ARCH_FPGA
-
-endif
-
-source "arch/unicore32/mm/Kconfig"
-
-comment "Floating point support"
-
-config UNICORE_FPU_F64
-	def_bool y if !ARCH_FPGA
-
-endmenu
-
-menu "Kernel Features"
-
-source "kernel/Kconfig.hz"
-
-config LEDS
-	def_bool y
-	depends on GPIOLIB
-
-config ALIGNMENT_TRAP
-	def_bool y
-	help
-	  Unicore processors can not fetch/store information which is not
-	  naturally aligned on the bus, i.e., a 4 byte fetch must start at an
-	  address divisible by 4. On 32-bit Unicore processors, these non-aligned
-	  fetch/store instructions will be emulated in software if you say
-	  here, which has a severe performance impact. This is necessary for
-	  correct operation of some network protocols. With an IP-only
-	  configuration it is safe to say N, otherwise say Y.
-
-endmenu
-
-menu "Boot options"
-
-config CMDLINE
-	string "Default kernel command string"
-	default ""
-
-config CMDLINE_FORCE
-	bool "Always use the default kernel command string"
-	depends on CMDLINE != ""
-	help
-	  Always use the default kernel command string, even if the boot
-	  loader passes other arguments to the kernel.
-	  This is useful if you cannot or don't want to change the
-	  command-line options your boot loader passes to the kernel.
-
-	  If unsure, say N.
-
-endmenu
-
-menu "Power management options"
-
-source "kernel/power/Kconfig"
-
-source "drivers/cpufreq/Kconfig"
-
-config ARCH_SUSPEND_POSSIBLE
-	def_bool y if !ARCH_FPGA
-
-config ARCH_HIBERNATION_POSSIBLE
-	def_bool y if !ARCH_FPGA
-
-endmenu
-
-if ARCH_PUV3
-
-config PUV3_GPIO
-	bool
-	depends on !ARCH_FPGA
-	select GPIO_SYSFS
-	default y
-
-if PUV3_NB0916
-
-menu "PKUnity NetBook-0916 Features"
-
-config I2C_BATTERY_BQ27200
-	tristate "I2C Battery BQ27200 Support"
-	select I2C_PUV3
-	select POWER_SUPPLY
-	select BATTERY_BQ27XXX
-
-config I2C_EEPROM_AT24
-	tristate "I2C EEPROMs AT24 support"
-	select I2C_PUV3
-	select EEPROM_AT24
-
-config LCD_BACKLIGHT
-	tristate "LCD Backlight support"
-	select BACKLIGHT_PWM
-
-endmenu
-
-endif
-
-endif
diff --git a/arch/unicore32/Kconfig.debug b/arch/unicore32/Kconfig.debug
deleted file mode 100644
index ca0ff97657ef..000000000000
--- a/arch/unicore32/Kconfig.debug
+++ /dev/null
@@ -1,29 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-
-config EARLY_PRINTK
-	def_bool DEBUG_OCD
-	help
-	  Write kernel log output directly into the ocd or to a serial port.
-
-	  This is useful for kernel debugging when your machine crashes very
-	  early before the console code is initialized. For normal operation
-	  it is not recommended because it looks ugly and doesn't cooperate
-	  with klogd/syslogd or the X server. You should normally N here,
-	  unless you want to debug such a crash.
-
-# These options are only for real kernel hackers who want to get their hands dirty.
-config DEBUG_LL
-	bool "Kernel low-level debugging functions"
-	depends on DEBUG_KERNEL
-	help
-	  Say Y here to include definitions of printascii, printch, printhex
-	  in the kernel.  This is helpful if you are debugging code that
-	  executes before the console is initialized.
-
-config DEBUG_OCD
-	bool "Kernel low-level debugging via On-Chip-Debugger"
-	depends on DEBUG_LL
-	default y
-	help
-	  Say Y here if you want the debug print routines to direct their
-	  output to the UniCore On-Chip-Debugger channel using CP #1.
diff --git a/arch/unicore32/Makefile b/arch/unicore32/Makefile
deleted file mode 100644
index 390819947c37..000000000000
--- a/arch/unicore32/Makefile
+++ /dev/null
@@ -1,59 +0,0 @@
-#
-# arch/unicore32/Makefile
-#
-# This file is included by the global makefile so that you can add your own
-# architecture-specific flags and dependencies.
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License.  See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Copyright (C) 2002~2010 by Guan Xue-tao
-#
-ifneq ($(SUBARCH),$(ARCH))
-	ifeq ($(CROSS_COMPILE),)
-		CROSS_COMPILE := $(call cc-cross-prefix, unicore32-linux-)
-	endif
-endif
-
-LDFLAGS_vmlinux		:= -p --no-undefined -X
-
-OBJCOPYFLAGS		:= -O binary -R .note -R .note.gnu.build-id -R .comment -S
-
-# Never generate .eh_frame
-KBUILD_CFLAGS		+= $(call cc-option,-fno-dwarf2-cfi-asm)
-
-# Never use hard float in kernel
-KBUILD_CFLAGS		+= -msoft-float
-
-ifeq ($(CONFIG_FRAME_POINTER),y)
-KBUILD_CFLAGS		+= -mno-sched-prolog
-endif
-
-CHECKFLAGS		+= -D__unicore32__
-
-head-y			:= arch/unicore32/kernel/head.o
-
-core-y			+= arch/unicore32/kernel/
-core-y			+= arch/unicore32/mm/
-
-libs-y			+= arch/unicore32/lib/
-
-boot			:= arch/unicore32/boot
-
-# Default target when executing plain make
-KBUILD_IMAGE		:= $(boot)/zImage
-
-all:	zImage
-
-zImage Image uImage: vmlinux
-	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
-
-archclean:
-	$(Q)$(MAKE) $(clean)=$(boot)
-
-define archhelp
-  echo  '* zImage        - Compressed kernel image (arch/$(ARCH)/boot/zImage)'
-  echo  '  Image         - Uncompressed kernel image (arch/$(ARCH)/boot/Image)'
-  echo  '  uImage        - U-Boot wrapped zImage'
-endef
diff --git a/arch/unicore32/boot/Makefile b/arch/unicore32/boot/Makefile
deleted file mode 100644
index 828855007b29..000000000000
--- a/arch/unicore32/boot/Makefile
+++ /dev/null
@@ -1,39 +0,0 @@
-#
-# arch/unicore32/boot/Makefile
-#
-# This file is included by the global makefile so that you can add your own
-# architecture-specific flags and dependencies.
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License.  See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Copyright (C) 2001~2010 GUAN Xue-tao
-#
-
-targets := Image zImage uImage
-
-$(obj)/Image: vmlinux FORCE
-	$(call if_changed,objcopy)
-	@echo '  Kernel: $@ is ready'
-
-$(obj)/compressed/vmlinux: $(obj)/Image FORCE
-	$(Q)$(MAKE) $(build)=$(obj)/compressed $@
-
-$(obj)/zImage: $(obj)/compressed/vmlinux FORCE
-	$(call if_changed,objcopy)
-	@echo '  Kernel: $@ is ready'
-
-UIMAGE_ARCH = unicore
-UIMAGE_LOADADDR = 0x0
-
-$(obj)/uImage: $(obj)/zImage FORCE
-	$(call if_changed,uimage)
-	@echo '  Image $@ is ready'
-
-PHONY += initrd
-initrd:
-	@test "$(INITRD)" != "" || \
-	(echo You must specify INITRD; exit -1)
-
-subdir- := compressed
diff --git a/arch/unicore32/boot/compressed/Makefile b/arch/unicore32/boot/compressed/Makefile
deleted file mode 100644
index 150fafc32fb0..000000000000
--- a/arch/unicore32/boot/compressed/Makefile
+++ /dev/null
@@ -1,64 +0,0 @@
-#
-# linux/arch/unicore32/boot/compressed/Makefile
-#
-# create a compressed vmlinuz image from the original vmlinux
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License.  See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Copyright (C) 2001~2010 GUAN Xue-tao
-#
-
-ccflags-y	:= -fpic -fno-builtin
-asflags-y	:= -Wa,-march=all
-
-OBJS		:= misc.o
-
-# font.c and font.o
-CFLAGS_font.o	:= -Dstatic=
-$(obj)/font.c: $(srctree)/lib/fonts/font_8x8.c
-	$(call cmd,shipped)
-
-# piggy.S and piggy.o
-suffix_$(CONFIG_KERNEL_GZIP)	:= gzip
-suffix_$(CONFIG_KERNEL_BZIP2)	:= bz2
-suffix_$(CONFIG_KERNEL_LZO)	:= lzo
-suffix_$(CONFIG_KERNEL_LZMA)	:= lzma
-
-$(obj)/piggy.$(suffix_y): $(obj)/../Image FORCE
-	$(call if_changed,$(suffix_y))
-
-SEDFLAGS_piggy	= s/DECOMP_SUFFIX/$(suffix_y)/
-$(obj)/piggy.S: $(obj)/piggy.S.in
-	@sed "$(SEDFLAGS_piggy)" < $< > $@
-
-$(obj)/piggy.o:  $(obj)/piggy.$(suffix_y) $(obj)/piggy.S FORCE
-
-targets		:= vmlinux vmlinux.lds font.o font.c head.o misc.o \
-			piggy.$(suffix_y) piggy.o piggy.S \
-
-# Make sure files are removed during clean
-extra-y		+= piggy.gzip piggy.bz2 piggy.lzo piggy.lzma
-
-# ?
-LDFLAGS_vmlinux += -p
-# Report unresolved symbol references
-LDFLAGS_vmlinux += --no-undefined
-# Delete all temporary local symbols
-LDFLAGS_vmlinux += -X
-# Next argument is a linker script
-LDFLAGS_vmlinux += -T
-
-# For uidivmod
-$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/head.o $(obj)/piggy.o \
-		$(obj)/misc.o FORCE
-	$(call if_changed,ld)
-
-# We now have a PIC decompressor implementation.  Decompressors running
-# from RAM should not define ZTEXTADDR.  Decompressors running directly
-# from ROM or Flash must define ZTEXTADDR (preferably via the config)
-ZTEXTADDR	:= 0x03000000
-ZBSSADDR	:= ALIGN(4)
-
-CPPFLAGS_vmlinux.lds = -DTEXT_START="$(ZTEXTADDR)" -DBSS_START="$(ZBSSADDR)"
diff --git a/arch/unicore32/boot/compressed/head.S b/arch/unicore32/boot/compressed/head.S
deleted file mode 100644
index 5f72662cd294..000000000000
--- a/arch/unicore32/boot/compressed/head.S
+++ /dev/null
@@ -1,201 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/boot/compressed/head.S
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/linkage.h>
-#include <mach/memory.h>
-
-#define csub	cmpsub
-#define cand	cmpand
-#define nop8	nop; nop; nop; nop; nop; nop; nop; nop
-
-		.section ".start", #alloc, #execinstr
-		.text
-start:
-		.type	start,#function
-
-		/* Initialize ASR, PRIV mode and INTR off */
-		mov	r0, #0xD3
-		mov.a	asr, r0
-
-		adr	r0, LC0
-		ldm	(r1, r2, r3, r5, r6, r7, r8), [r0]+
-		ldw	sp, [r0+], #28
-		sub.a	r0, r0, r1		@ calculate the delta offset
-
-		/*
-		 * if delta is zero, we are running at the address
-		 * we were linked at.
-		 */
-		beq	not_relocated
-
-		/*
-		 * We're running at a different address.  We need to fix
-		 * up various pointers:
-		 *   r5 - zImage base address (_start)
-		 *   r7 - GOT start
-		 *   r8 - GOT end
-		 */
-		add	r5, r5, r0
-		add	r7, r7, r0
-		add	r8, r8, r0
-
-		/*
-		 * we need to fix up pointers into the BSS region.
-		 *   r2 - BSS start
-		 *   r3 - BSS end
-		 *   sp - stack pointer
-		 */
-		add	r2, r2, r0
-		add	r3, r3, r0
-		add	sp, sp, r0
-
-		/*
-		 * Relocate all entries in the GOT table.
-		 * This fixes up the C references.
-		 *   r7 - GOT start
-		 *   r8 - GOT end
-		 */
-1001:		ldw	r1, [r7+], #0
-		add	r1, r1, r0
-		stw.w	r1, [r7]+, #4
-		csub.a	r7, r8
-		bub	1001b
-
-not_relocated:
-		/*
-		 * Clear BSS region.
-		 *   r2 - BSS start
-		 *   r3 - BSS end
-		 */
-		mov	r0, #0
-1002:		stw.w	r0, [r2]+, #4
-		csub.a	r2, r3
-		bub	1002b
-
-		/*
-		 * Turn on the cache.
-		 */
-                mov     r0, #0
-                movc    p0.c5, r0, #28		@ cache invalidate all
-                nop8
-                movc    p0.c6, r0, #6		@ tlb invalidate all
-                nop8
-
-                mov     r0, #0x1c		@ en icache and wb dcache
-                movc    p0.c1, r0, #0
-                nop8
-
-		/*
-		 * Set up some pointers, for starting decompressing.
-		 */
-
-		mov	r1, sp			@ malloc space above stack
-		add	r2, sp, #0x10000	@ 64k max
-
-		/*
-		 * Check to see if we will overwrite ourselves.
-		 *   r4 = final kernel address
-		 *   r5 = start of this image
-		 *   r6 = size of decompressed image
-		 *   r2 = end of malloc space (and therefore this image)
-		 * We basically want:
-		 *   r4 >= r2 -> OK
-		 *   r4 + image length <= r5 -> OK
-		 */
-		ldw	r4, =KERNEL_IMAGE_START
-		csub.a	r4, r2
-		bea	wont_overwrite
-		add	r0, r4, r6
-		csub.a	r0, r5
-		beb	wont_overwrite
-
-		/*
-		 * If overwrite, just print error message
-		 */
-		b	__error_overwrite
-
-		/*
-		 * We're not in danger of overwriting ourselves.
-		 * Do this the simple way.
-		 */
-wont_overwrite:
-		/*
-		 * decompress_kernel:
-		 *   r0: output_start
-		 *   r1: free_mem_ptr_p
-		 *   r2: free_mem_ptr_end_p
-		 */
-		mov	r0, r4
-		b.l	decompress_kernel	@ C functions
-
-		/*
-		 * Clean and flush the cache to maintain consistency.
-		 */
-		mov	r0, #0
-                movc    p0.c5, r0, #14		@ flush dcache
-		nop8
-                movc    p0.c5, r0, #20		@ icache invalidate all
-                nop8
-
-		/*
-		 * Turn off the Cache and MMU.
-		 */
-		mov	r0, #0			@ disable i/d cache and MMU
-		movc	p0.c1, r0, #0
-                nop8
-
-		mov	r0, #0			@ must be zero
-		ldw	r4, =KERNEL_IMAGE_START
-		mov	pc, r4			@ call kernel
-
-
-		.align	2
-		.type	LC0, #object
-LC0:		.word	LC0			@ r1
-		.word	__bss_start		@ r2
-		.word	_end			@ r3
-		.word	_start			@ r5
-		.word	_image_size		@ r6
-		.word	_got_start		@ r7
-		.word	_got_end		@ r8
-		.word	decompress_stack_end	@ sp
-		.size	LC0, . - LC0
-
-print_string:
-#ifdef CONFIG_DEBUG_OCD
-2001:		ldb.w	r1, [r0]+, #1
-		csub.a	r1, #0
-		bne	2002f
-		mov	pc, lr
-2002:
-		movc	r2, p1.c0, #0
-		cand.a	r2, #2
-		bne	2002b
-		movc	p1.c1, r1, #1
-		csub.a	r1, #'\n'
-		cmoveq	r1, #'\r'
-		beq	2002b
-		b	2001b
-#else
-		mov	pc, lr
-#endif
-
-__error_overwrite:
-		adr	r0, str_error
-		b.l	print_string
-2001:		nop8
-		b	2001b
-str_error:	.asciz	"\nError: Kernel address OVERWRITE\n"
-		.align
-
-		.ltorg
-
-		.align	4
-		.section ".stack", "aw", %nobits
-decompress_stack:	.space	4096
-decompress_stack_end:
diff --git a/arch/unicore32/boot/compressed/misc.c b/arch/unicore32/boot/compressed/misc.c
deleted file mode 100644
index 450d3355de20..000000000000
--- a/arch/unicore32/boot/compressed/misc.c
+++ /dev/null
@@ -1,123 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/boot/compressed/misc.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-
-#include <asm/unaligned.h>
-#include <mach/uncompress.h>
-
-/*
- * gzip delarations
- */
-unsigned char *output_data;
-unsigned long output_ptr;
-
-unsigned int free_mem_ptr;
-unsigned int free_mem_end_ptr;
-
-#define STATIC static
-#define STATIC_RW_DATA	/* non-static please */
-
-/*
- * arch-dependent implementations
- */
-#ifndef ARCH_HAVE_DECOMP_ERROR
-#define arch_decomp_error(x)
-#endif
-
-#ifndef ARCH_HAVE_DECOMP_SETUP
-#define arch_decomp_setup()
-#endif
-
-#ifndef ARCH_HAVE_DECOMP_PUTS
-#define arch_decomp_puts(p)
-#endif
-
-void *memcpy(void *dest, const void *src, size_t n)
-{
-	int i = 0;
-	unsigned char *d = (unsigned char *)dest, *s = (unsigned char *)src;
-
-	for (i = n >> 3; i > 0; i--) {
-		*d++ = *s++;
-		*d++ = *s++;
-		*d++ = *s++;
-		*d++ = *s++;
-		*d++ = *s++;
-		*d++ = *s++;
-		*d++ = *s++;
-		*d++ = *s++;
-	}
-
-	if (n & 1 << 2) {
-		*d++ = *s++;
-		*d++ = *s++;
-		*d++ = *s++;
-		*d++ = *s++;
-	}
-
-	if (n & 1 << 1) {
-		*d++ = *s++;
-		*d++ = *s++;
-	}
-
-	if (n & 1)
-		*d++ = *s++;
-
-	return dest;
-}
-
-void error(char *x)
-{
-	arch_decomp_puts("\n\n");
-	arch_decomp_puts(x);
-	arch_decomp_puts("\n\n -- System halted");
-
-	arch_decomp_error(x);
-
-	for (;;)
-		; /* Halt */
-}
-
-/* Heap size should be adjusted for different decompress method */
-#ifdef CONFIG_KERNEL_GZIP
-#include "../../../../lib/decompress_inflate.c"
-#endif
-
-#ifdef CONFIG_KERNEL_BZIP2
-#include "../../../../lib/decompress_bunzip2.c"
-#endif
-
-#ifdef CONFIG_KERNEL_LZO
-#include "../../../../lib/decompress_unlzo.c"
-#endif
-
-#ifdef CONFIG_KERNEL_LZMA
-#include "../../../../lib/decompress_unlzma.c"
-#endif
-
-unsigned long decompress_kernel(unsigned long output_start,
-		unsigned long free_mem_ptr_p,
-		unsigned long free_mem_ptr_end_p)
-{
-	unsigned char *tmp;
-
-	output_data		= (unsigned char *)output_start;
-	free_mem_ptr		= free_mem_ptr_p;
-	free_mem_end_ptr	= free_mem_ptr_end_p;
-
-	arch_decomp_setup();
-
-	tmp = (unsigned char *) (((unsigned long)input_data_end) - 4);
-	output_ptr = get_unaligned_le32(tmp);
-
-	arch_decomp_puts("Uncompressing Linux...");
-	__decompress(input_data, input_data_end - input_data, NULL, NULL,
-			output_data, 0, NULL, error);
-	arch_decomp_puts(" done, booting the kernel.\n");
-	return output_ptr;
-}
diff --git a/arch/unicore32/boot/compressed/piggy.S.in b/arch/unicore32/boot/compressed/piggy.S.in
deleted file mode 100644
index b79704d58026..000000000000
--- a/arch/unicore32/boot/compressed/piggy.S.in
+++ /dev/null
@@ -1,6 +0,0 @@
-	.section .piggydata,#alloc
-	.globl	input_data
-input_data:
-	.incbin	"arch/unicore32/boot/compressed/piggy.DECOMP_SUFFIX"
-	.globl	input_data_end
-input_data_end:
diff --git a/arch/unicore32/boot/compressed/vmlinux.lds.S b/arch/unicore32/boot/compressed/vmlinux.lds.S
deleted file mode 100644
index edda4ddfa357..000000000000
--- a/arch/unicore32/boot/compressed/vmlinux.lds.S
+++ /dev/null
@@ -1,58 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore/boot/compressed/vmlinux.lds.in
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-OUTPUT_ARCH(unicore32)
-ENTRY(_start)
-SECTIONS
-{
-  /DISCARD/ : {
-    /*
-     * Discard any r/w data - this produces a link error if we have any,
-     * which is required for PIC decompression.  Local data generates
-     * GOTOFF relocations, which prevents it being relocated independently
-     * of the text/got segments.
-     */
-    *(.data)
-  }
-
-  . = TEXT_START;
-  _text = .;
-
-  .text : {
-    _start = .;
-    *(.start)
-    *(.text)
-    *(.text.*)
-    *(.fixup)
-    *(.gnu.warning)
-    *(.rodata)
-    *(.rodata.*)
-    *(.piggydata)
-    . = ALIGN(4);
-  }
-
-  _etext = .;
-
-  /* Assume size of decompressed image is 4x the compressed image */
-  _image_size = (_etext - _text) * 4;
-
-  _got_start = .;
-  .got			: { *(.got) }
-  _got_end = .;
-  .got.plt		: { *(.got.plt) }
-  _edata = .;
-
-  . = BSS_START;
-  __bss_start = .;
-  .bss			: { *(.bss) }
-  _end = .;
-
-  .stack		: { *(.stack) }
-  .comment 0		: { *(.comment) }
-}
-
diff --git a/arch/unicore32/configs/defconfig b/arch/unicore32/configs/defconfig
deleted file mode 100644
index 360cc9abcdb0..000000000000
--- a/arch/unicore32/configs/defconfig
+++ /dev/null
@@ -1,214 +0,0 @@
-### General setup
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCALVERSION="-unicore32"
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_HOTPLUG=y
-#	Initial RAM filesystem and RAM disk (initramfs/initrd) support
-#CONFIG_BLK_DEV_INITRD=y
-#CONFIG_INITRAMFS_SOURCE="arch/unicore/ramfs/ramfs_config"
-
-### Enable loadable module support
-CONFIG_MODULES=n
-CONFIG_MODULE_UNLOAD=y
-
-### System Type
-CONFIG_ARCH_PUV3=y
-#	Board Selection
-CONFIG_PUV3_NB0916=y
-#	Processor Features
-CONFIG_CPU_DCACHE_LINE_DISABLE=y
-CONFIG_CPU_TLB_SINGLE_ENTRY_DISABLE=n
-
-### Bus support
-CONFIG_PCI=y
-CONFIG_PCI_LEGACY=n
-
-### Boot options
-#	for debug, adding: earlyprintk=ocd,keep initcall_debug
-#	others support: test_suspend=mem root=/dev/sda
-#	hibernate support: resume=/dev/sda3
-CONFIG_CMDLINE="earlyprintk=ocd,keep ignore_loglevel"
-# TODO: mem=512M video=unifb:1024x600-16@75
-# for nfs: root=/dev/nfs rw nfsroot=192.168.10.88:/home/udb/nfs/,rsize=1024,wsize=1024
-#	ip=192.168.10.83:192.168.10.88:192.168.10.1:255.255.255.0::eth0:off
-CONFIG_CMDLINE_FORCE=y
-
-### Power management options
-CONFIG_PM=y
-CONFIG_HIBERNATION=y
-CONFIG_PM_STD_PARTITION="/dev/sda3"
-CONFIG_CPU_FREQ=n
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-
-### Networking support
-CONFIG_NET=y
-#	Networking options
-CONFIG_PACKET=m
-CONFIG_UNIX=m
-#	TCP/IP networking
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IPV6=n
-#	Wireless
-CONFIG_WIRELESS=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_MAC80211=m
-
-### PKUnity SoC Features
-CONFIG_USB_WLAN_HED_AQ3=n
-CONFIG_USB_CMMB_INNOFIDEI=n
-CONFIG_I2C_BATTERY_BQ27200=n
-CONFIG_I2C_EEPROM_AT24=n
-CONFIG_LCD_BACKLIGHT=n
-
-CONFIG_PUV3_UMAL=y
-CONFIG_PUV3_MUSB=n
-CONFIG_PUV3_AC97=n
-CONFIG_PUV3_NAND=n
-CONFIG_PUV3_MMC=n
-CONFIG_PUV3_UART=n
-
-### Device Drivers
-#	Memory Technology Device (MTD) support
-CONFIG_MTD=m
-CONFIG_MTD_UBI=m
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=m
-#	RAM/ROM/Flash chip drivers
-CONFIG_MTD_CFI=m
-CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_CFI_AMDSTD=m
-#	Mapping drivers for chip access
-CONFIG_MTD_PHYSMAP=m
-
-#	Block devices
-CONFIG_BLK_DEV_LOOP=m
-
-#	SCSI device support
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_DEV_SR=m
-CONFIG_CHR_DEV_SG=m
-
-#	Serial ATA (prod) and Parallel ATA (experimental) drivers
-CONFIG_ATA=y
-CONFIG_SATA_VIA=y
-
-#	Network device support
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NETDEV_1000=y
-#	Wireless LAN
-CONFIG_WLAN_80211=n
-CONFIG_RT2X00=n
-CONFIG_RT73USB=n
-
-#	Input device support
-CONFIG_INPUT_EVDEV=m
-#	Keyboards
-CONFIG_KEYBOARD_GPIO=m
-
-#	I2C support
-CONFIG_I2C=y
-CONFIG_I2C_PUV3=y
-
-#	Hardware Monitoring support
-#CONFIG_SENSORS_LM75=m
-#	Generic Thermal sysfs driver
-#CONFIG_THERMAL=y
-#CONFIG_THERMAL_HWMON=y
-
-#	Multimedia support
-CONFIG_MEDIA_SUPPORT=n
-CONFIG_VIDEO_DEV=n
-CONFIG_USB_VIDEO_CLASS=n
-
-#	Graphics support
-CONFIG_FB=y
-CONFIG_FB_PUV3_UNIGFX=y
-#	Console display driver support
-CONFIG_VGA_CONSOLE=n
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-#	Bootup logo
-CONFIG_LOGO=n
-
-#	Sound card support
-CONFIG_SOUND=m
-#	Advanced Linux Sound Architecture
-CONFIG_SND=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-
-#	USB support
-CONFIG_USB_ARCH_HAS_HCD=n
-CONFIG_USB=n
-CONFIG_USB_PRINTER=n
-CONFIG_USB_STORAGE=n
-#	Inventra Highspeed Dual Role Controller
-CONFIG_USB_MUSB_HDRC=n
-
-#	LED Support
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-#	LED Triggers
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_DISK=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-
-#	Real Time Clock
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_PUV3=y
-
-### File systems
-CONFIG_EXT2_FS=m
-CONFIG_EXT3_FS=y
-CONFIG_EXT4_FS=y
-CONFIG_FUSE_FS=m
-#	CD-ROM/DVD Filesystems
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_UDF_FS=m
-#	DOS/FAT/NT Filesystems
-CONFIG_VFAT_FS=m
-#	Pseudo filesystems
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-#	Miscellaneous filesystems
-CONFIG_MISC_FILESYSTEMS=y
-CONFIG_JFFS2_FS=m
-CONFIG_UBIFS_FS=m
-#	Network File Systems
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-#	Partition Types
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MSDOS_PARTITION=y
-#	Native language support
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_UTF8=m
-
-### Kernel hacking
-CONFIG_FRAME_WARN=8096
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_PROVE_LOCKING=n
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
-CONFIG_DEBUG_LL=y
-
diff --git a/arch/unicore32/include/asm/Kbuild b/arch/unicore32/include/asm/Kbuild
deleted file mode 100644
index 55026e8240d8..000000000000
--- a/arch/unicore32/include/asm/Kbuild
+++ /dev/null
@@ -1,7 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-generic-y += extable.h
-generic-y += kvm_para.h
-generic-y += mcs_spinlock.h
-generic-y += parport.h
-generic-y += syscalls.h
-generic-y += user.h
diff --git a/arch/unicore32/include/asm/assembler.h b/arch/unicore32/include/asm/assembler.h
deleted file mode 100644
index 3de843d92850..000000000000
--- a/arch/unicore32/include/asm/assembler.h
+++ /dev/null
@@ -1,128 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/assembler.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- *
- *  Do not include any C declarations in this file - it is included by
- *  assembler source.
- */
-#ifndef __ASSEMBLY__
-#error "Only include this from assembly code"
-#endif
-
-#include <asm/ptrace.h>
-
-/*
- * Little Endian independent macros for shifting bytes within registers.
- */
-#define pull            >>
-#define push            <<
-#define get_byte_0      << #0
-#define get_byte_1	>> #8
-#define get_byte_2	>> #16
-#define get_byte_3	>> #24
-#define put_byte_0      << #0
-#define put_byte_1	<< #8
-#define put_byte_2	<< #16
-#define put_byte_3	<< #24
-
-#define cadd		cmpadd
-#define cand		cmpand
-#define csub		cmpsub
-#define cxor		cmpxor
-
-/*
- * Enable and disable interrupts
- */
-	.macro disable_irq, temp
-	mov	\temp, asr
-	andn     \temp, \temp, #0xFF
-	or	\temp, \temp, #PSR_I_BIT | PRIV_MODE
-	mov.a	asr, \temp
-	.endm
-
-	.macro enable_irq, temp
-	mov	\temp, asr
-	andn     \temp, \temp, #0xFF
-	or	\temp, \temp, #PRIV_MODE
-	mov.a	asr, \temp
-	.endm
-
-#define USER(x...)				\
-9999:	x;					\
-	.pushsection __ex_table, "a";		\
-	.align	3;				\
-	.long	9999b, 9001f;			\
-	.popsection
-
-	.macro	notcond, cond, nexti = .+8
-	.ifc	\cond, eq
-		bne	\nexti
-	.else;	.ifc	\cond, ne
-		beq	\nexti
-	.else;	.ifc	\cond, ea
-		bub	\nexti
-	.else;	.ifc	\cond, ub
-		bea	\nexti
-	.else;	.ifc	\cond, fs
-		bns	\nexti
-	.else;	.ifc	\cond, ns
-		bfs	\nexti
-	.else;	.ifc	\cond, fv
-		bnv	\nexti
-	.else;	.ifc	\cond, nv
-		bfv	\nexti
-	.else;	.ifc	\cond, ua
-		beb	\nexti
-	.else;	.ifc	\cond, eb
-		bua	\nexti
-	.else;	.ifc	\cond, eg
-		bsl	\nexti
-	.else;	.ifc	\cond, sl
-		beg	\nexti
-	.else;	.ifc	\cond, sg
-		bel	\nexti
-	.else;	.ifc	\cond, el
-		bsg	\nexti
-	.else;	.ifnc	\cond, al
-		.error  "Unknown cond in notcond macro argument"
-	.endif;	.endif;	.endif;	.endif;	.endif;	.endif;	.endif
-	.endif;	.endif;	.endif;	.endif;	.endif;	.endif;	.endif
-	.endif
-	.endm
-
-	.macro	usracc, instr, reg, ptr, inc, cond, rept, abort
-	.rept	\rept
-	notcond	\cond, .+8
-9999 :
-	.if	\inc == 1
-	\instr\()b.u \reg, [\ptr], #\inc
-	.elseif	\inc == 4
-	\instr\()w.u \reg, [\ptr], #\inc
-	.else
-	.error	"Unsupported inc macro argument"
-	.endif
-
-	.pushsection __ex_table, "a"
-	.align	3
-	.long	9999b, \abort
-	.popsection
-	.endr
-	.endm
-
-	.macro	strusr, reg, ptr, inc, cond = al, rept = 1, abort = 9001f
-	usracc	st, \reg, \ptr, \inc, \cond, \rept, \abort
-	.endm
-
-	.macro	ldrusr, reg, ptr, inc, cond = al, rept = 1, abort = 9001f
-	usracc	ld, \reg, \ptr, \inc, \cond, \rept, \abort
-	.endm
-
-	.macro	nop8
-	.rept	8
-		nop
-	.endr
-	.endm
diff --git a/arch/unicore32/include/asm/barrier.h b/arch/unicore32/include/asm/barrier.h
deleted file mode 100644
index efb81de87507..000000000000
--- a/arch/unicore32/include/asm/barrier.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Memory barrier implementations for PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2012 GUAN Xue-tao
- */
-#ifndef __UNICORE_BARRIER_H__
-#define __UNICORE_BARRIER_H__
-
-#define isb() __asm__ __volatile__ ("" : : : "memory")
-#define dsb() __asm__ __volatile__ ("" : : : "memory")
-#define dmb() __asm__ __volatile__ ("" : : : "memory")
-
-#include <asm-generic/barrier.h>
-
-#endif /* __UNICORE_BARRIER_H__ */
diff --git a/arch/unicore32/include/asm/bitops.h b/arch/unicore32/include/asm/bitops.h
deleted file mode 100644
index deeb2163f35e..000000000000
--- a/arch/unicore32/include/asm/bitops.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/bitops.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-
-#ifndef __UNICORE_BITOPS_H__
-#define __UNICORE_BITOPS_H__
-
-#define _ASM_GENERIC_BITOPS_FLS_H_
-#define _ASM_GENERIC_BITOPS___FLS_H_
-#define _ASM_GENERIC_BITOPS_FFS_H_
-#define _ASM_GENERIC_BITOPS___FFS_H_
-/*
- * On UNICORE, those functions can be implemented around
- * the cntlz instruction for much better code efficiency.
- */
-
-static inline int fls(unsigned int x)
-{
-	int ret;
-
-	asm("cntlz\t%0, %1" : "=r" (ret) : "r" (x) : "cc");
-	ret = 32 - ret;
-
-	return ret;
-}
-
-#define __fls(x) (fls(x) - 1)
-#define ffs(x) ({ unsigned long __t = (x); fls(__t & -__t); })
-#define __ffs(x) (ffs(x) - 1)
-
-#include <asm-generic/bitops.h>
-
-/* following definitions: to avoid using codes in lib/find_*.c */
-#define find_next_bit		find_next_bit
-#define find_next_zero_bit	find_next_zero_bit
-#define find_first_bit		find_first_bit
-#define find_first_zero_bit	find_first_zero_bit
-
-#include <asm-generic/bitops/find.h>
-
-#endif /* __UNICORE_BITOPS_H__ */
diff --git a/arch/unicore32/include/asm/bug.h b/arch/unicore32/include/asm/bug.h
deleted file mode 100644
index 99acea84a865..000000000000
--- a/arch/unicore32/include/asm/bug.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Bug handling for PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2012 GUAN Xue-tao
- */
-#ifndef __UNICORE_BUG_H__
-#define __UNICORE_BUG_H__
-
-#include <asm-generic/bug.h>
-
-struct pt_regs;
-struct siginfo;
-
-extern void die(const char *msg, struct pt_regs *regs, int err);
-extern void uc32_notify_die(const char *str, struct pt_regs *regs,
-		int sig, int code, void __user *addr,
-		unsigned long err, unsigned long trap);
-
-#endif /* __UNICORE_BUG_H__ */
diff --git a/arch/unicore32/include/asm/cache.h b/arch/unicore32/include/asm/cache.h
deleted file mode 100644
index 44ecd1f300fe..000000000000
--- a/arch/unicore32/include/asm/cache.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/cache.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#ifndef __UNICORE_CACHE_H__
-#define __UNICORE_CACHE_H__
-
-#define L1_CACHE_SHIFT		(5)
-#define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
-
-/*
- * Memory returned by kmalloc() may be used for DMA, so we must make
- * sure that all such allocations are cache aligned. Otherwise,
- * unrelated code may cause parts of the buffer to be read into the
- * cache before the transfer is done, causing old data to be seen by
- * the CPU.
- */
-#define ARCH_DMA_MINALIGN	L1_CACHE_BYTES
-
-#endif
diff --git a/arch/unicore32/include/asm/cacheflush.h b/arch/unicore32/include/asm/cacheflush.h
deleted file mode 100644
index ff0be92ebc32..000000000000
--- a/arch/unicore32/include/asm/cacheflush.h
+++ /dev/null
@@ -1,186 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/cacheflush.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#ifndef __UNICORE_CACHEFLUSH_H__
-#define __UNICORE_CACHEFLUSH_H__
-
-#include <linux/mm.h>
-
-#include <asm/shmparam.h>
-
-#define CACHE_COLOUR(vaddr)	((vaddr & (SHMLBA - 1)) >> PAGE_SHIFT)
-
-/*
- * This flag is used to indicate that the page pointed to by a pte is clean
- * and does not require cleaning before returning it to the user.
- */
-#define PG_dcache_clean PG_arch_1
-
-/*
- *	MM Cache Management
- *	===================
- *
- *	The arch/unicore32/mm/cache.S files implement these methods.
- *
- *	Start addresses are inclusive and end addresses are exclusive;
- *	start addresses should be rounded down, end addresses up.
- *
- *	See Documentation/core-api/cachetlb.rst for more information.
- *	Please note that the implementation of these, and the required
- *	effects are cache-type (VIVT/VIPT/PIPT) specific.
- *
- *	flush_icache_all()
- *
- *		Unconditionally clean and invalidate the entire icache.
- *		Currently only needed for cache-v6.S and cache-v7.S, see
- *		__flush_icache_all for the generic implementation.
- *
- *	flush_kern_all()
- *
- *		Unconditionally clean and invalidate the entire cache.
- *
- *	flush_user_all()
- *
- *		Clean and invalidate all user space cache entries
- *		before a change of page tables.
- *
- *	flush_user_range(start, end, flags)
- *
- *		Clean and invalidate a range of cache entries in the
- *		specified address space before a change of page tables.
- *		- start - user start address (inclusive, page aligned)
- *		- end   - user end address   (exclusive, page aligned)
- *		- flags - vma->vm_flags field
- *
- *	coherent_kern_range(start, end)
- *
- *		Ensure coherency between the Icache and the Dcache in the
- *		region described by start, end.  If you have non-snooping
- *		Harvard caches, you need to implement this function.
- *		- start  - virtual start address
- *		- end    - virtual end address
- *
- *	coherent_user_range(start, end)
- *
- *		Ensure coherency between the Icache and the Dcache in the
- *		region described by start, end.  If you have non-snooping
- *		Harvard caches, you need to implement this function.
- *		- start  - virtual start address
- *		- end    - virtual end address
- *
- *	flush_kern_dcache_area(kaddr, size)
- *
- *		Ensure that the data held in page is written back.
- *		- kaddr  - page address
- *		- size   - region size
- *
- *	DMA Cache Coherency
- *	===================
- *
- *	dma_flush_range(start, end)
- *
- *		Clean and invalidate the specified virtual address range.
- *		- start  - virtual start address
- *		- end    - virtual end address
- */
-
-extern void __cpuc_flush_icache_all(void);
-extern void __cpuc_flush_kern_all(void);
-extern void __cpuc_flush_user_all(void);
-extern void __cpuc_flush_user_range(unsigned long, unsigned long, unsigned int);
-extern void __cpuc_coherent_kern_range(unsigned long, unsigned long);
-extern void __cpuc_coherent_user_range(unsigned long, unsigned long);
-extern void __cpuc_flush_dcache_area(void *, size_t);
-extern void __cpuc_flush_kern_dcache_area(void *addr, size_t size);
-
-/*
- * Copy user data from/to a page which is mapped into a different
- * processes address space.  Really, we want to allow our "user
- * space" model to handle this.
- */
-extern void copy_to_user_page(struct vm_area_struct *, struct page *,
-	unsigned long, void *, const void *, unsigned long);
-#define copy_from_user_page(vma, page, vaddr, dst, src, len)	\
-	do {							\
-		memcpy(dst, src, len);				\
-	} while (0)
-
-/*
- * Convert calls to our calling convention.
- */
-/* Invalidate I-cache */
-static inline void __flush_icache_all(void)
-{
-	asm("movc	p0.c5, %0, #20;\n"
-	    "nop; nop; nop; nop; nop; nop; nop; nop\n"
-	    :
-	    : "r" (0));
-}
-
-#define flush_cache_all()		__cpuc_flush_kern_all()
-
-extern void flush_cache_mm(struct mm_struct *mm);
-extern void flush_cache_range(struct vm_area_struct *vma,
-		unsigned long start, unsigned long end);
-extern void flush_cache_page(struct vm_area_struct *vma,
-		unsigned long user_addr, unsigned long pfn);
-
-#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
-
-/*
- * Perform necessary cache operations to ensure that data previously
- * stored within this range of addresses can be executed by the CPU.
- */
-#define flush_icache_range(s, e)	__cpuc_coherent_kern_range(s, e)
-
-/*
- * Perform necessary cache operations to ensure that the TLB will
- * see data written in the specified area.
- */
-#define clean_dcache_area(start, size)	cpu_dcache_clean_area(start, size)
-
-/*
- * flush_dcache_page is used when the kernel has written to the page
- * cache page at virtual address page->virtual.
- *
- * If this page isn't mapped (ie, page_mapping == NULL), or it might
- * have userspace mappings, then we _must_ always clean + invalidate
- * the dcache entries associated with the kernel mapping.
- *
- * Otherwise we can defer the operation, and clean the cache when we are
- * about to change to user space.  This is the same method as used on SPARC64.
- * See update_mmu_cache for the user space part.
- */
-#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
-extern void flush_dcache_page(struct page *);
-
-#define flush_dcache_mmap_lock(mapping)		do { } while (0)
-#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
-
-/*
- * We don't appear to need to do anything here.  In fact, if we did, we'd
- * duplicate cache flushing elsewhere performed by flush_dcache_page().
- */
-#define flush_icache_page(vma, page)	do { } while (0)
-
-/*
- * flush_cache_vmap() is used when creating mappings (eg, via vmap,
- * vmalloc, ioremap etc) in kernel space for pages.  On non-VIPT
- * caches, since the direct-mappings of these pages may contain cached
- * data, we need to do a full cache flush to ensure that writebacks
- * don't corrupt data placed into these pages via the new mappings.
- */
-static inline void flush_cache_vmap(unsigned long start, unsigned long end)
-{
-}
-
-static inline void flush_cache_vunmap(unsigned long start, unsigned long end)
-{
-}
-
-#endif
diff --git a/arch/unicore32/include/asm/checksum.h b/arch/unicore32/include/asm/checksum.h
deleted file mode 100644
index e774ca268c15..000000000000
--- a/arch/unicore32/include/asm/checksum.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/checksum.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- *
- * IP checksum routines
- */
-#ifndef __UNICORE_CHECKSUM_H__
-#define __UNICORE_CHECKSUM_H__
-
-/*
- * computes the checksum of the TCP/UDP pseudo-header
- * returns a 16-bit checksum, already complemented
- */
-
-static inline __wsum
-csum_tcpudp_nofold(__be32 saddr, __be32 daddr, __u32 len,
-		   __u8 proto, __wsum sum)
-{
-	__asm__(
-	"add.a	%0, %1, %2\n"
-	"addc.a	%0, %0, %3\n"
-	"addc.a	%0, %0, %4 << #8\n"
-	"addc.a	%0, %0, %5\n"
-	"addc	%0, %0, #0\n"
-	: "=&r"(sum)
-	: "r" (sum), "r" (daddr), "r" (saddr), "r" (len), "Ir" (htons(proto))
-	: "cc");
-	return sum;
-}
-#define csum_tcpudp_nofold	csum_tcpudp_nofold
-
-#include <asm-generic/checksum.h>
-
-#endif
diff --git a/arch/unicore32/include/asm/cmpxchg.h b/arch/unicore32/include/asm/cmpxchg.h
deleted file mode 100644
index 87f960a2e4f0..000000000000
--- a/arch/unicore32/include/asm/cmpxchg.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Atomics xchg/cmpxchg for PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2012 GUAN Xue-tao
- */
-#ifndef __UNICORE_CMPXCHG_H__
-#define __UNICORE_CMPXCHG_H__
-
-/*
- * Generate a link failure on undefined symbol if the pointer points to a value
- * of unsupported size.
- */
-extern void __xchg_bad_pointer(void);
-
-static inline unsigned long __xchg(unsigned long x, volatile void *ptr,
-		int size)
-{
-	unsigned long ret;
-
-	switch (size) {
-	case 1:
-		asm volatile("swapb	%0, %1, [%2]"
-			: "=&r" (ret)
-			: "r" (x), "r" (ptr)
-			: "memory", "cc");
-		break;
-	case 4:
-		asm volatile("swapw	%0, %1, [%2]"
-			: "=&r" (ret)
-			: "r" (x), "r" (ptr)
-			: "memory", "cc");
-		break;
-	default:
-		__xchg_bad_pointer();
-	}
-
-	return ret;
-}
-
-#define xchg(ptr, x) \
-	((__typeof__(*(ptr)))__xchg((unsigned long)(x), (ptr), sizeof(*(ptr))))
-
-#include <asm-generic/cmpxchg-local.h>
-
-/*
- * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
- * them available.
- */
-#define cmpxchg_local(ptr, o, n)					\
-		((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr),	\
-		(unsigned long)(o), (unsigned long)(n), sizeof(*(ptr))))
-#define cmpxchg64_local(ptr, o, n)					\
-		__cmpxchg64_local_generic((ptr), (o), (n))
-
-#include <asm-generic/cmpxchg.h>
-
-#endif /* __UNICORE_CMPXCHG_H__ */
diff --git a/arch/unicore32/include/asm/cpu-single.h b/arch/unicore32/include/asm/cpu-single.h
deleted file mode 100644
index 1b419d697fd1..000000000000
--- a/arch/unicore32/include/asm/cpu-single.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/cpu-single.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#ifndef __UNICORE_CPU_SINGLE_H__
-#define __UNICORE_CPU_SINGLE_H__
-
-#include <asm/page.h>
-#include <asm/memory.h>
-
-#ifdef __KERNEL__
-#ifndef __ASSEMBLY__
-
-#define cpu_switch_mm(pgd, mm) cpu_do_switch_mm(virt_to_phys(pgd), mm)
-
-#define cpu_get_pgd()					\
-	({						\
-		unsigned long pg;			\
-		__asm__("movc	%0, p0.c2, #0"		\
-			 : "=r" (pg) : : "cc");		\
-		pg &= ~0x0fff;				\
-		(pgd_t *)phys_to_virt(pg);		\
-	})
-
-struct mm_struct;
-
-/* declare all the functions as extern */
-extern void cpu_proc_fin(void);
-extern int cpu_do_idle(void);
-extern void cpu_dcache_clean_area(void *, int);
-extern void cpu_do_switch_mm(unsigned long pgd_phys, struct mm_struct *mm);
-extern void cpu_set_pte(pte_t *ptep, pte_t pte);
-extern void cpu_reset(unsigned long addr) __attribute__((noreturn));
-
-#endif /* __ASSEMBLY__ */
-#endif /* __KERNEL__ */
-
-#endif /* __UNICORE_CPU_SINGLE_H__ */
diff --git a/arch/unicore32/include/asm/cputype.h b/arch/unicore32/include/asm/cputype.h
deleted file mode 100644
index 08a47e3bdbcc..000000000000
--- a/arch/unicore32/include/asm/cputype.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/cputype.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#ifndef __UNICORE_CPUTYPE_H__
-#define __UNICORE_CPUTYPE_H__
-
-#include <linux/stringify.h>
-
-#define CPUID_CPUID	0
-#define CPUID_CACHETYPE	1
-
-#define read_cpuid(reg)							\
-	({								\
-		unsigned int __val;					\
-		asm("movc	%0, p0.c0, #" __stringify(reg)		\
-		    : "=r" (__val)					\
-		    :							\
-		    : "cc");						\
-		__val;							\
-	})
-
-#define uc32_cpuid		read_cpuid(CPUID_CPUID)
-#define uc32_cachetype		read_cpuid(CPUID_CACHETYPE)
-
-#endif
diff --git a/arch/unicore32/include/asm/delay.h b/arch/unicore32/include/asm/delay.h
deleted file mode 100644
index 934193edfa66..000000000000
--- a/arch/unicore32/include/asm/delay.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/delay.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- *
- * Delay routines, using a pre-computed "loops_per_second" value.
- */
-#ifndef __UNICORE_DELAY_H__
-#define __UNICORE_DELAY_H__
-
-#include <asm/param.h>	/* HZ */
-
-extern void __delay(int loops);
-
-/*
- * This function intentionally does not exist; if you see references to
- * it, it means that you're calling udelay() with an out of range value.
- *
- * With currently imposed limits, this means that we support a max delay
- * of 2000us. Further limits: HZ<=1000 and bogomips<=3355
- */
-extern void __bad_udelay(void);
-
-/*
- * division by multiplication: you don't have to worry about
- * loss of precision.
- *
- * Use only for very small delays ( < 1 msec).  Should probably use a
- * lookup table, really, as the multiplications take much too long with
- * short delays.  This is a "reasonable" implementation, though (and the
- * first constant multiplications gets optimized away if the delay is
- * a constant)
- */
-extern void __udelay(unsigned long usecs);
-extern void __const_udelay(unsigned long);
-
-#define MAX_UDELAY_MS 2
-
-#define udelay(n)							\
-	(__builtin_constant_p(n) ?					\
-	  ((n) > (MAX_UDELAY_MS * 1000) ? __bad_udelay() :		\
-			__const_udelay((n) * ((2199023U*HZ)>>11))) :	\
-	  __udelay(n))
-
-#endif /* __UNICORE_DELAY_H__ */
-
diff --git a/arch/unicore32/include/asm/dma.h b/arch/unicore32/include/asm/dma.h
deleted file mode 100644
index 1326310b21e6..000000000000
--- a/arch/unicore32/include/asm/dma.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/dma.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-
-#ifndef __UNICORE_DMA_H__
-#define __UNICORE_DMA_H__
-
-#include <asm/memory.h>
-#include <asm-generic/dma.h>
-
-#ifdef CONFIG_PCI
-extern int isa_dma_bridge_buggy;
-#endif
-
-#endif /* __UNICORE_DMA_H__ */
diff --git a/arch/unicore32/include/asm/elf.h b/arch/unicore32/include/asm/elf.h
deleted file mode 100644
index a464ed5f05d4..000000000000
--- a/arch/unicore32/include/asm/elf.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/elf.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-
-#ifndef __UNICORE_ELF_H__
-#define __UNICORE_ELF_H__
-
-#include <asm/hwcap.h>
-
-/*
- * ELF register definitions..
- */
-#include <asm/ptrace.h>
-#include <linux/elf-em.h>
-
-typedef unsigned long elf_greg_t;
-typedef unsigned long elf_freg_t[3];
-
-#define ELF_NGREG (sizeof(struct pt_regs) / sizeof(elf_greg_t))
-typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-
-typedef struct fp_state elf_fpregset_t;
-
-#define R_UNICORE_NONE		0
-#define R_UNICORE_PC24		1
-#define R_UNICORE_ABS32		2
-#define R_UNICORE_CALL		28
-#define R_UNICORE_JUMP24	29
-
-/*
- * These are used to set parameters in the core dumps.
- */
-#define ELF_CLASS	ELFCLASS32
-#define ELF_DATA	ELFDATA2LSB
-#define ELF_ARCH	EM_UNICORE
-
-/*
- * This yields a string that ld.so will use to load implementation
- * specific libraries for optimization.  This is more specific in
- * intent than poking at uname or /proc/cpuinfo.
- *
- */
-#define ELF_PLATFORM_SIZE 8
-#define ELF_PLATFORM	(elf_platform)
-
-extern char elf_platform[];
-
-struct elf32_hdr;
-
-/*
- * This is used to ensure we don't load something for the wrong architecture.
- */
-extern int elf_check_arch(const struct elf32_hdr *);
-#define elf_check_arch elf_check_arch
-
-struct task_struct;
-int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs);
-#define ELF_CORE_COPY_TASK_REGS dump_task_regs
-
-#define ELF_EXEC_PAGESIZE	4096
-
-/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
-   use of this is to invoke "./ld.so someprog" to test out a new version of
-   the loader.  We need to make sure that it is out of the way of the program
-   that it will "exec", and that there is sufficient room for the brk.  */
-
-#define ELF_ET_DYN_BASE	(2 * TASK_SIZE / 3)
-
-/* When the program starts, a1 contains a pointer to a function to be
-   registered with atexit, as per the SVR4 ABI.  A value of 0 means we
-   have no such handler.  */
-#define ELF_PLAT_INIT(_r, load_addr)	{(_r)->UCreg_00 = 0; }
-
-extern void elf_set_personality(const struct elf32_hdr *);
-#define SET_PERSONALITY(ex)	elf_set_personality(&(ex))
-
-struct mm_struct;
-extern unsigned long arch_randomize_brk(struct mm_struct *mm);
-#define arch_randomize_brk arch_randomize_brk
-
-extern int vectors_user_mapping(void);
-#define arch_setup_additional_pages(bprm, uses_interp) vectors_user_mapping()
-#define ARCH_HAS_SETUP_ADDITIONAL_PAGES
-
-#endif
diff --git a/arch/unicore32/include/asm/fpstate.h b/arch/unicore32/include/asm/fpstate.h
deleted file mode 100644
index 5811293e7a7e..000000000000
--- a/arch/unicore32/include/asm/fpstate.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/fpstate.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-
-#ifndef __UNICORE_FPSTATE_H__
-#define __UNICORE_FPSTATE_H__
-
-#ifndef __ASSEMBLY__
-
-#define FP_REGS_NUMBER		33
-
-struct fp_state {
-	unsigned int regs[FP_REGS_NUMBER];
-} __attribute__((aligned(8)));
-
-#endif
-
-#endif
diff --git a/arch/unicore32/include/asm/fpu-ucf64.h b/arch/unicore32/include/asm/fpu-ucf64.h
deleted file mode 100644
index 7a0c8a9e05d4..000000000000
--- a/arch/unicore32/include/asm/fpu-ucf64.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/fpu-ucf64.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- *	Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
- *	Copyright (C) 2001-2010 Guan Xuetao
- */
-#define FPSCR			s31
-
-/* FPSCR bits */
-#define FPSCR_DEFAULT_NAN	(1<<25)
-
-#define FPSCR_CMPINSTR_BIT	(1<<31)
-
-#define FPSCR_CON		(1<<29)
-#define FPSCR_TRAP		(1<<27)
-
-/* RND mode */
-#define FPSCR_ROUND_NEAREST	(0<<0)
-#define FPSCR_ROUND_PLUSINF	(2<<0)
-#define FPSCR_ROUND_MINUSINF	(3<<0)
-#define FPSCR_ROUND_TOZERO	(1<<0)
-#define FPSCR_RMODE_BIT		(0)
-#define FPSCR_RMODE_MASK	(7 << FPSCR_RMODE_BIT)
-
-/* trap enable */
-#define FPSCR_IOE		(1<<16)
-#define FPSCR_OFE		(1<<14)
-#define FPSCR_UFE		(1<<13)
-#define FPSCR_IXE		(1<<12)
-#define FPSCR_HIE		(1<<11)
-#define FPSCR_NDE		(1<<10)	/* non denomal */
-
-/* flags */
-#define FPSCR_IDC		(1<<24)
-#define FPSCR_HIC		(1<<23)
-#define FPSCR_IXC		(1<<22)
-#define FPSCR_OFC		(1<<21)
-#define FPSCR_UFC		(1<<20)
-#define FPSCR_IOC		(1<<19)
-
-/* stick bits */
-#define FPSCR_IOS		(1<<9)
-#define FPSCR_OFS		(1<<7)
-#define FPSCR_UFS		(1<<6)
-#define FPSCR_IXS		(1<<5)
-#define FPSCR_HIS		(1<<4)
-#define FPSCR_NDS		(1<<3)	/*non denomal */
diff --git a/arch/unicore32/include/asm/gpio.h b/arch/unicore32/include/asm/gpio.h
deleted file mode 100644
index dfad04ca0a65..000000000000
--- a/arch/unicore32/include/asm/gpio.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/gpio.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-
-#ifndef __UNICORE_GPIO_H__
-#define __UNICORE_GPIO_H__
-
-#include <linux/io.h>
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <asm-generic/gpio.h>
-
-#define GPI_OTP_INT             0
-#define GPI_PCI_INTA            1
-#define GPI_PCI_INTB            2
-#define GPI_PCI_INTC            3
-#define GPI_PCI_INTD            4
-#define GPI_BAT_DET             5
-#define GPI_SD_CD               6
-#define GPI_SOFF_REQ            7
-#define GPI_SD_WP               8
-#define GPI_LCD_CASE_OFF        9
-#define GPO_WIFI_EN             10
-#define GPO_HDD_LED             11
-#define GPO_VGA_EN              12
-#define GPO_LCD_EN              13
-#define GPO_LED_DATA            14
-#define GPO_LED_CLK             15
-#define GPO_CAM_PWR_EN          16
-#define GPO_LCD_VCC_EN          17
-#define GPO_SOFT_OFF            18
-#define GPO_BT_EN               19
-#define GPO_FAN_ON              20
-#define GPO_SPKR                21
-#define GPO_SET_V1              23
-#define GPO_SET_V2              24
-#define GPO_CPU_HEALTH          25
-#define GPO_LAN_SEL             26
-
-#ifdef CONFIG_PUV3_NB0916
-#define GPI_BTN_TOUCH		14
-#define GPIO_IN			0x000043ff /* 1 for input */
-#define GPIO_OUT		0x0fffbc00 /* 1 for output */
-#endif	/* CONFIG_PUV3_NB0916 */
-
-#ifdef CONFIG_PUV3_SMW0919
-#define GPIO_IN			0x000003ff /* 1 for input */
-#define GPIO_OUT		0x0ffffc00 /* 1 for output */
-#endif  /* CONFIG_PUV3_SMW0919 */
-
-#ifdef CONFIG_PUV3_DB0913
-#define GPIO_IN			0x000001df /* 1 for input */
-#define GPIO_OUT		0x03fee800 /* 1 for output */
-#endif  /* CONFIG_PUV3_DB0913 */
-
-#define GPIO_DIR                (~((GPIO_IN) | 0xf0000000))
-				/* 0 input, 1 output */
-
-static inline int gpio_get_value(unsigned gpio)
-{
-	if (__builtin_constant_p(gpio) && (gpio <= GPIO_MAX))
-		return readl(GPIO_GPLR) & GPIO_GPIO(gpio);
-	else
-		return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	if (__builtin_constant_p(gpio) && (gpio <= GPIO_MAX))
-		if (value)
-			writel(GPIO_GPIO(gpio), GPIO_GPSR);
-		else
-			writel(GPIO_GPIO(gpio), GPIO_GPCR);
-	else
-		__gpio_set_value(gpio, value);
-}
-
-#define gpio_cansleep	__gpio_cansleep
-
-static inline unsigned gpio_to_irq(unsigned gpio)
-{
-	if ((gpio < IRQ_GPIOHIGH) && (FIELD(1, 1, gpio) & readl(GPIO_GPIR)))
-		return IRQ_GPIOLOW0 + gpio;
-	else
-		return IRQ_GPIO0 + gpio;
-}
-
-static inline unsigned irq_to_gpio(unsigned irq)
-{
-	if (irq < IRQ_GPIOHIGH)
-		return irq - IRQ_GPIOLOW0;
-	else
-		return irq - IRQ_GPIO0;
-}
-
-#endif /* __UNICORE_GPIO_H__ */
diff --git a/arch/unicore32/include/asm/hwcap.h b/arch/unicore32/include/asm/hwcap.h
deleted file mode 100644
index 2e15ffbe8391..000000000000
--- a/arch/unicore32/include/asm/hwcap.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/hwcap.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#ifndef __UNICORE_HWCAP_H__
-#define __UNICORE_HWCAP_H__
-
-/*
- * HWCAP flags
- */
-#define HWCAP_MSP		1
-#define HWCAP_UNICORE16		2
-#define HWCAP_CMOV		4
-#define HWCAP_UNICORE_F64       8
-#define HWCAP_TLS		0x80
-
-#if defined(__KERNEL__) && !defined(__ASSEMBLY__)
-/*
- * This yields a mask that user programs can use to figure out what
- * instruction set this cpu supports.
- */
-#define ELF_HWCAP		(HWCAP_CMOV | HWCAP_UNICORE_F64)
-#endif
-
-#endif
diff --git a/arch/unicore32/include/asm/hwdef-copro.h b/arch/unicore32/include/asm/hwdef-copro.h
deleted file mode 100644
index 2db8cf864e43..000000000000
--- a/arch/unicore32/include/asm/hwdef-copro.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Co-processor register definitions for PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2012 GUAN Xue-tao
- */
-#ifndef __UNICORE_HWDEF_COPRO_H__
-#define __UNICORE_HWDEF_COPRO_H__
-
-/*
- * Control Register bits (CP#0 CR1)
- */
-#define CR_M	(1 << 0)	/* MMU enable				*/
-#define CR_A	(1 << 1)	/* Alignment abort enable		*/
-#define CR_D	(1 << 2)	/* Dcache enable			*/
-#define CR_I	(1 << 3)	/* Icache enable			*/
-#define CR_B	(1 << 4)	/* Dcache write mechanism: write back	*/
-#define CR_T	(1 << 5)	/* Burst enable				*/
-#define CR_V	(1 << 13)	/* Vectors relocated to 0xffff0000	*/
-
-#ifndef __ASSEMBLY__
-
-#define vectors_high()		(cr_alignment & CR_V)
-
-extern unsigned long cr_no_alignment;	/* defined in entry.S */
-extern unsigned long cr_alignment;	/* defined in entry.S */
-
-static inline unsigned int get_cr(void)
-{
-	unsigned int val;
-	asm("movc %0, p0.c1, #0" : "=r" (val) : : "cc");
-	return val;
-}
-
-static inline void set_cr(unsigned int val)
-{
-	asm volatile("movc p0.c1, %0, #0" : : "r" (val) : "cc");
-	isb();
-}
-
-extern void adjust_cr(unsigned long mask, unsigned long set);
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __UNICORE_HWDEF_COPRO_H__ */
diff --git a/arch/unicore32/include/asm/io.h b/arch/unicore32/include/asm/io.h
deleted file mode 100644
index bd4e7c332f85..000000000000
--- a/arch/unicore32/include/asm/io.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/io.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#ifndef __UNICORE_IO_H__
-#define __UNICORE_IO_H__
-
-#ifdef __KERNEL__
-
-#include <asm/byteorder.h>
-#include <asm/memory.h>
-
-#define PCI_IOBASE	PKUNITY_PCILIO_BASE
-#include <asm-generic/io.h>
-
-/*
- * __uc32_ioremap takes CPU physical address.
- */
-extern void __iomem *__uc32_ioremap(unsigned long, size_t);
-extern void __uc32_iounmap(volatile void __iomem *addr);
-
-/*
- * ioremap and friends.
- *
- * ioremap takes a PCI memory address, as specified in
- * Documentation/driver-api/io-mapping.rst.
- *
- */
-#define ioremap(cookie, size)		__uc32_ioremap(cookie, size)
-#define iounmap(cookie)			__uc32_iounmap(cookie)
-
-#define readb_relaxed readb
-#define readw_relaxed readw
-#define readl_relaxed readl
-
-#define HAVE_ARCH_PIO_SIZE
-#define PIO_OFFSET		(unsigned int)(PCI_IOBASE)
-#define PIO_MASK		(unsigned int)(IO_SPACE_LIMIT)
-#define PIO_RESERVED		(PIO_OFFSET + PIO_MASK + 1)
-
-#ifdef CONFIG_STRICT_DEVMEM
-
-#include <linux/ioport.h>
-#include <linux/mm.h>
-
-/*
- * devmem_is_allowed() checks to see if /dev/mem access to a certain
- * address is valid. The argument is a physical page number.
- * We mimic x86 here by disallowing access to system RAM as well as
- * device-exclusive MMIO regions. This effectively disable read()/write()
- * on /dev/mem.
- */
-static inline int devmem_is_allowed(unsigned long pfn)
-{
-	if (iomem_is_exclusive(pfn << PAGE_SHIFT))
-		return 0;
-	if (!page_is_ram(pfn))
-		return 1;
-	return 0;
-}
-
-#endif /* CONFIG_STRICT_DEVMEM */
-
-#endif	/* __KERNEL__ */
-#endif	/* __UNICORE_IO_H__ */
diff --git a/arch/unicore32/include/asm/irq.h b/arch/unicore32/include/asm/irq.h
deleted file mode 100644
index 3f7f07c0338c..000000000000
--- a/arch/unicore32/include/asm/irq.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/irq.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#ifndef __UNICORE_IRQ_H__
-#define __UNICORE_IRQ_H__
-
-#include <asm-generic/irq.h>
-
-#define	IRQ_GPIOLOW0		0x00
-#define	IRQ_GPIOLOW1		0x01
-#define	IRQ_GPIOLOW2		0x02
-#define	IRQ_GPIOLOW3		0x03
-#define	IRQ_GPIOLOW4		0x04
-#define	IRQ_GPIOLOW5		0x05
-#define	IRQ_GPIOLOW6		0x06
-#define	IRQ_GPIOLOW7		0x07
-#define IRQ_GPIOHIGH		0x08
-#define IRQ_USB			0x09
-#define IRQ_SDC			0x0a
-#define IRQ_AC97		0x0b
-#define IRQ_SATA		0x0c
-#define IRQ_MME			0x0d
-#define IRQ_PCI_BRIDGE		0x0e
-#define	IRQ_DDR			0x0f
-#define	IRQ_SPI			0x10
-#define	IRQ_UNIGFX		0x11
-#define	IRQ_I2C			0x11
-#define	IRQ_UART1		0x12
-#define	IRQ_UART0		0x13
-#define IRQ_UMAL		0x14
-#define IRQ_NAND		0x15
-#define IRQ_PS2_KBD		0x16
-#define IRQ_PS2_AUX		0x17
-#define IRQ_DMA			0x18
-#define IRQ_DMAERR		0x19
-#define	IRQ_TIMER0		0x1a
-#define	IRQ_TIMER1		0x1b
-#define	IRQ_TIMER2		0x1c
-#define	IRQ_TIMER3		0x1d
-#define	IRQ_RTC			0x1e
-#define	IRQ_RTCAlarm		0x1f
-
-#define	IRQ_GPIO0		0x20
-#define	IRQ_GPIO1		0x21
-#define	IRQ_GPIO2		0x22
-#define	IRQ_GPIO3		0x23
-#define	IRQ_GPIO4		0x24
-#define	IRQ_GPIO5		0x25
-#define	IRQ_GPIO6		0x26
-#define	IRQ_GPIO7		0x27
-#define IRQ_GPIO8		0x28
-#define IRQ_GPIO9		0x29
-#define IRQ_GPIO10		0x2a
-#define IRQ_GPIO11		0x2b
-#define IRQ_GPIO12		0x2c
-#define IRQ_GPIO13		0x2d
-#define IRQ_GPIO14		0x2e
-#define IRQ_GPIO15		0x2f
-#define IRQ_GPIO16		0x30
-#define IRQ_GPIO17		0x31
-#define IRQ_GPIO18		0x32
-#define IRQ_GPIO19		0x33
-#define IRQ_GPIO20		0x34
-#define IRQ_GPIO21		0x35
-#define IRQ_GPIO22		0x36
-#define IRQ_GPIO23		0x37
-#define IRQ_GPIO24		0x38
-#define IRQ_GPIO25		0x39
-#define IRQ_GPIO26		0x3a
-#define IRQ_GPIO27		0x3b
-
-#ifdef CONFIG_ARCH_FPGA
-#define IRQ_PCIINTA             IRQ_GPIOLOW2
-#define IRQ_PCIINTB             IRQ_GPIOLOW1
-#define IRQ_PCIINTC             IRQ_GPIOLOW0
-#define IRQ_PCIINTD             IRQ_GPIOLOW6
-#endif
-
-#if defined(CONFIG_PUV3_DB0913) || defined(CONFIG_PUV3_NB0916)	\
-	|| defined(CONFIG_PUV3_SMW0919)
-#define IRQ_PCIINTA             IRQ_GPIOLOW1
-#define IRQ_PCIINTB             IRQ_GPIOLOW2
-#define IRQ_PCIINTC             IRQ_GPIOLOW3
-#define IRQ_PCIINTD             IRQ_GPIOLOW4
-#endif
-
-#define IRQ_SD_CD               IRQ_GPIO6 /* falling or rising trigger */
-
-#ifndef __ASSEMBLY__
-struct pt_regs;
-
-extern void asm_do_IRQ(unsigned int, struct pt_regs *);
-
-#endif
-
-#endif
-
diff --git a/arch/unicore32/include/asm/irqflags.h b/arch/unicore32/include/asm/irqflags.h
deleted file mode 100644
index f64c82e3eae6..000000000000
--- a/arch/unicore32/include/asm/irqflags.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/irqflags.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#ifndef __UNICORE_IRQFLAGS_H__
-#define __UNICORE_IRQFLAGS_H__
-
-#ifdef __KERNEL__
-
-#include <asm/ptrace.h>
-
-#define ARCH_IRQ_DISABLED	(PRIV_MODE | PSR_I_BIT)
-#define ARCH_IRQ_ENABLED	(PRIV_MODE)
-
-/*
- * Save the current interrupt enable state.
- */
-static inline unsigned long arch_local_save_flags(void)
-{
-	unsigned long temp;
-
-	asm volatile("mov %0, asr" : "=r" (temp) : : "memory", "cc");
-
-	return temp & PSR_c;
-}
-
-/*
- * restore saved IRQ state
- */
-static inline void arch_local_irq_restore(unsigned long flags)
-{
-	unsigned long temp;
-
-	asm volatile(
-		"mov	%0, asr\n"
-		"mov.a	asr, %1\n"
-		"mov.f	asr, %0"
-		: "=&r" (temp)
-		: "r" (flags)
-		: "memory", "cc");
-}
-
-#include <asm-generic/irqflags.h>
-
-#endif
-#endif
diff --git a/arch/unicore32/include/asm/linkage.h b/arch/unicore32/include/asm/linkage.h
deleted file mode 100644
index 8e341ba7bc4a..000000000000
--- a/arch/unicore32/include/asm/linkage.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/linkage.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#ifndef __UNICORE_LINKAGE_H__
-#define __UNICORE_LINKAGE_H__
-
-#define __ALIGN .align 0
-#define __ALIGN_STR ".align 0"
-
-#define ENDPROC(name) \
-	.type name, %function; \
-	END(name)
-
-#endif
diff --git a/arch/unicore32/include/asm/memblock.h b/arch/unicore32/include/asm/memblock.h
deleted file mode 100644
index eb56a6ddce83..000000000000
--- a/arch/unicore32/include/asm/memblock.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/memblock.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-
-#ifndef __UNICORE_MEMBLOCK_H__
-#define __UNICORE_MEMBLOCK_H__
-
-/*
- * Memory map description
- */
-# define NR_BANKS 8
-
-struct membank {
-	unsigned long start;
-	unsigned long size;
-	unsigned int highmem;
-};
-
-struct meminfo {
-	int nr_banks;
-	struct membank bank[NR_BANKS];
-};
-
-extern struct meminfo meminfo;
-
-#define for_each_bank(iter, mi)				\
-	for (iter = 0; iter < (mi)->nr_banks; iter++)
-
-#define bank_pfn_start(bank)	__phys_to_pfn((bank)->start)
-#define bank_pfn_end(bank)	__phys_to_pfn((bank)->start + (bank)->size)
-#define bank_pfn_size(bank)	((bank)->size >> PAGE_SHIFT)
-#define bank_phys_start(bank)	((bank)->start)
-#define bank_phys_end(bank)	((bank)->start + (bank)->size)
-#define bank_phys_size(bank)	((bank)->size)
-
-extern void uc32_memblock_init(struct meminfo *);
-
-#endif
diff --git a/arch/unicore32/include/asm/memory.h b/arch/unicore32/include/asm/memory.h
deleted file mode 100644
index 66285178dd9b..000000000000
--- a/arch/unicore32/include/asm/memory.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/memory.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- *
- *  Note: this file should not be included by non-asm/.h files
- */
-#ifndef __UNICORE_MEMORY_H__
-#define __UNICORE_MEMORY_H__
-
-#include <linux/compiler.h>
-#include <linux/const.h>
-#include <linux/sizes.h>
-#include <mach/memory.h>
-
-/*
- * PAGE_OFFSET - the virtual address of the start of the kernel image
- * TASK_SIZE - the maximum size of a user space task.
- * TASK_UNMAPPED_BASE - the lower boundary of the mmap VM area
- */
-#define PAGE_OFFSET		UL(0xC0000000)
-#define TASK_SIZE		(PAGE_OFFSET - UL(0x41000000))
-#define TASK_UNMAPPED_BASE	(PAGE_OFFSET / 3)
-
-/*
- * The module space lives between the addresses given by TASK_SIZE
- * and PAGE_OFFSET - it must be within 32MB of the kernel text.
- */
-#define MODULES_VADDR		(PAGE_OFFSET - 16*1024*1024)
-#if TASK_SIZE > MODULES_VADDR
-#error Top of user space clashes with start of module space
-#endif
-
-#define MODULES_END		(PAGE_OFFSET)
-
-/*
- * Allow 16MB-aligned ioremap pages
- */
-#define IOREMAP_MAX_ORDER	24
-
-/*
- * Physical vs virtual RAM address space conversion.  These are
- * private definitions which should NOT be used outside memory.h
- * files.  Use virt_to_phys/phys_to_virt/__pa/__va instead.
- */
-#ifndef __virt_to_phys
-#define __virt_to_phys(x)	((x) - PAGE_OFFSET + PHYS_OFFSET)
-#define __phys_to_virt(x)	((x) - PHYS_OFFSET + PAGE_OFFSET)
-#endif
-
-/*
- * Convert a page to/from a physical address
- */
-#define page_to_phys(page)	(__pfn_to_phys(page_to_pfn(page)))
-#define phys_to_page(phys)	(pfn_to_page(__phys_to_pfn(phys)))
-
-#ifndef __ASSEMBLY__
-
-#ifndef arch_adjust_zones
-#define arch_adjust_zones(max_zone_pfn) do { } while (0)
-#endif
-
-/*
- * PFNs are used to describe any physical page; this means
- * PFN 0 == physical address 0.
- *
- * This is the PFN of the first RAM page in the kernel
- * direct-mapped view.  We assume this is the first page
- * of RAM in the mem_map as well.
- */
-#define PHYS_PFN_OFFSET	(PHYS_OFFSET >> PAGE_SHIFT)
-
-/*
- * Drivers should NOT use these either.
- */
-#define __pa(x)			__virt_to_phys((unsigned long)(x))
-#define __va(x)			((void *)__phys_to_virt((unsigned long)(x)))
-#define pfn_to_kaddr(pfn)	__va((pfn) << PAGE_SHIFT)
-
-/*
- * Conversion between a struct page and a physical address.
- *
- *  page_to_pfn(page)	convert a struct page * to a PFN number
- *  pfn_to_page(pfn)	convert a _valid_ PFN number to struct page *
- *
- *  virt_to_page(k)	convert a _valid_ virtual address to struct page *
- *  virt_addr_valid(k)	indicates whether a virtual address is valid
- */
-#define ARCH_PFN_OFFSET		PHYS_PFN_OFFSET
-
-#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
-#define virt_addr_valid(kaddr)	((unsigned long)(kaddr) >= PAGE_OFFSET && \
-		(unsigned long)(kaddr) < (unsigned long)high_memory)
-
-#endif
-
-#include <asm-generic/memory_model.h>
-
-#endif
diff --git a/arch/unicore32/include/asm/mmu.h b/arch/unicore32/include/asm/mmu.h
deleted file mode 100644
index 8ad4e7eae17b..000000000000
--- a/arch/unicore32/include/asm/mmu.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/mmu.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#ifndef __UNICORE_MMU_H__
-#define __UNICORE_MMU_H__
-
-typedef	unsigned long mm_context_t;
-
-#endif
diff --git a/arch/unicore32/include/asm/mmu_context.h b/arch/unicore32/include/asm/mmu_context.h
deleted file mode 100644
index 388c0c811c68..000000000000
--- a/arch/unicore32/include/asm/mmu_context.h
+++ /dev/null
@@ -1,98 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/mmu_context.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#ifndef __UNICORE_MMU_CONTEXT_H__
-#define __UNICORE_MMU_CONTEXT_H__
-
-#include <linux/compiler.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/vmacache.h>
-#include <linux/io.h>
-
-#include <asm/cacheflush.h>
-#include <asm/cpu-single.h>
-
-#define init_new_context(tsk, mm)	0
-
-#define destroy_context(mm)		do { } while (0)
-
-/*
- * This is called when "tsk" is about to enter lazy TLB mode.
- *
- * mm:  describes the currently active mm context
- * tsk: task which is entering lazy tlb
- * cpu: cpu number which is entering lazy tlb
- *
- * tsk->mm will be NULL
- */
-static inline void
-enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
-{
-}
-
-/*
- * This is the actual mm switch as far as the scheduler
- * is concerned.  No registers are touched.  We avoid
- * calling the CPU specific function when the mm hasn't
- * actually changed.
- */
-static inline void
-switch_mm(struct mm_struct *prev, struct mm_struct *next,
-	  struct task_struct *tsk)
-{
-	unsigned int cpu = smp_processor_id();
-
-	if (!cpumask_test_and_set_cpu(cpu, mm_cpumask(next)) || prev != next)
-		cpu_switch_mm(next->pgd, next);
-}
-
-#define deactivate_mm(tsk, mm)	do { } while (0)
-#define activate_mm(prev, next)	switch_mm(prev, next, NULL)
-
-/*
- * We are inserting a "fake" vma for the user-accessible vector page so
- * gdb and friends can get to it through ptrace and /proc/<pid>/mem.
- * But we also want to remove it before the generic code gets to see it
- * during process exit or the unmapping of it would  cause total havoc.
- * (the macro is used as remove_vma() is static to mm/mmap.c)
- */
-#define arch_exit_mmap(mm) \
-do { \
-	struct vm_area_struct *high_vma = find_vma(mm, 0xffff0000); \
-	if (high_vma) { \
-		BUG_ON(high_vma->vm_next);  /* it should be last */ \
-		if (high_vma->vm_prev) \
-			high_vma->vm_prev->vm_next = NULL; \
-		else \
-			mm->mmap = NULL; \
-		rb_erase(&high_vma->vm_rb, &mm->mm_rb); \
-		vmacache_invalidate(mm); \
-		mm->map_count--; \
-		remove_vma(high_vma); \
-	} \
-} while (0)
-
-static inline int arch_dup_mmap(struct mm_struct *oldmm,
-				struct mm_struct *mm)
-{
-	return 0;
-}
-
-static inline void arch_unmap(struct mm_struct *mm,
-			unsigned long start, unsigned long end)
-{
-}
-
-static inline bool arch_vma_access_permitted(struct vm_area_struct *vma,
-		bool write, bool execute, bool foreign)
-{
-	/* by default, allow everything */
-	return true;
-}
-#endif
diff --git a/arch/unicore32/include/asm/page.h b/arch/unicore32/include/asm/page.h
deleted file mode 100644
index 96d6bdf180bd..000000000000
--- a/arch/unicore32/include/asm/page.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/page.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#ifndef __UNICORE_PAGE_H__
-#define __UNICORE_PAGE_H__
-
-/* PAGE_SHIFT determines the page size */
-#define PAGE_SHIFT		12
-#define PAGE_SIZE		(_AC(1, UL) << PAGE_SHIFT)
-#define PAGE_MASK		(~(PAGE_SIZE-1))
-
-#ifndef __ASSEMBLY__
-
-struct page;
-struct vm_area_struct;
-
-#define clear_page(page)	memset((void *)(page), 0, PAGE_SIZE)
-extern void copy_page(void *to, const void *from);
-
-#define clear_user_page(page, vaddr, pg)	clear_page(page)
-#define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
-
-#undef STRICT_MM_TYPECHECKS
-
-#ifdef STRICT_MM_TYPECHECKS
-/*
- * These are used to make use of C type-checking..
- */
-typedef struct { unsigned long pte; } pte_t;
-typedef struct { unsigned long pgd; } pgd_t;
-typedef struct { unsigned long pgprot; } pgprot_t;
-
-#define pte_val(x)      ((x).pte)
-#define pgd_val(x)	((x).pgd)
-#define pgprot_val(x)   ((x).pgprot)
-
-#define __pte(x)        ((pte_t) { (x) })
-#define __pgd(x)	((pgd_t) { (x) })
-#define __pgprot(x)     ((pgprot_t) { (x) })
-
-#else
-/*
- * .. while these make it easier on the compiler
- */
-typedef unsigned long pte_t;
-typedef unsigned long pgd_t;
-typedef unsigned long pgprot_t;
-
-#define pte_val(x)      (x)
-#define pgd_val(x)      (x)
-#define pgprot_val(x)   (x)
-
-#define __pte(x)        (x)
-#define __pgd(x)	(x)
-#define __pgprot(x)     (x)
-
-#endif /* STRICT_MM_TYPECHECKS */
-
-typedef struct page *pgtable_t;
-
-extern int pfn_valid(unsigned long);
-
-#include <asm/memory.h>
-
-#endif /* !__ASSEMBLY__ */
-
-#include <asm-generic/getorder.h>
-
-#endif
diff --git a/arch/unicore32/include/asm/pci.h b/arch/unicore32/include/asm/pci.h
deleted file mode 100644
index 3efa8ee1afce..000000000000
--- a/arch/unicore32/include/asm/pci.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/pci.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#ifndef __UNICORE_PCI_H__
-#define __UNICORE_PCI_H__
-
-#ifdef __KERNEL__
-#include <asm-generic/pci.h>
-#include <mach/hardware.h> /* for PCIBIOS_MIN_* */
-
-#define HAVE_PCI_MMAP
-#define ARCH_GENERIC_PCI_MMAP_RESOURCE
-
-#endif /* __KERNEL__ */
-#endif
diff --git a/arch/unicore32/include/asm/pgalloc.h b/arch/unicore32/include/asm/pgalloc.h
deleted file mode 100644
index ba1c9a79993b..000000000000
--- a/arch/unicore32/include/asm/pgalloc.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/pgalloc.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#ifndef __UNICORE_PGALLOC_H__
-#define __UNICORE_PGALLOC_H__
-
-#include <asm/pgtable-hwdef.h>
-#include <asm/processor.h>
-#include <asm/cacheflush.h>
-#include <asm/tlbflush.h>
-
-#define __HAVE_ARCH_PTE_ALLOC_ONE_KERNEL
-#define __HAVE_ARCH_PTE_ALLOC_ONE
-#include <asm-generic/pgalloc.h>
-
-#define _PAGE_USER_TABLE	(PMD_TYPE_TABLE | PMD_PRESENT)
-#define _PAGE_KERNEL_TABLE	(PMD_TYPE_TABLE | PMD_PRESENT)
-
-extern pgd_t *get_pgd_slow(struct mm_struct *mm);
-extern void free_pgd_slow(struct mm_struct *mm, pgd_t *pgd);
-
-#define pgd_alloc(mm)			get_pgd_slow(mm)
-#define pgd_free(mm, pgd)		free_pgd_slow(mm, pgd)
-
-/*
- * Allocate one PTE table.
- */
-static inline pte_t *
-pte_alloc_one_kernel(struct mm_struct *mm)
-{
-	pte_t *pte = __pte_alloc_one_kernel(mm);
-
-	if (pte)
-		clean_dcache_area(pte, PTRS_PER_PTE * sizeof(pte_t));
-
-	return pte;
-}
-
-static inline pgtable_t
-pte_alloc_one(struct mm_struct *mm)
-{
-	struct page *pte;
-
-	pte = __pte_alloc_one(mm, GFP_PGTABLE_USER);
-	if (!pte)
-		return NULL;
-	if (!PageHighMem(pte))
-		clean_pte_table(page_address(pte));
-	return pte;
-}
-
-static inline void __pmd_populate(pmd_t *pmdp, unsigned long pmdval)
-{
-	set_pmd(pmdp, __pmd(pmdval));
-	flush_pmd_entry(pmdp);
-}
-
-/*
- * Populate the pmdp entry with a pointer to the pte.  This pmd is part
- * of the mm address space.
- */
-static inline void
-pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmdp, pte_t *ptep)
-{
-	unsigned long pte_ptr = (unsigned long)ptep;
-
-	/*
-	 * The pmd must be loaded with the physical
-	 * address of the PTE table
-	 */
-	__pmd_populate(pmdp, __pa(pte_ptr) | _PAGE_KERNEL_TABLE);
-}
-
-static inline void
-pmd_populate(struct mm_struct *mm, pmd_t *pmdp, pgtable_t ptep)
-{
-	__pmd_populate(pmdp,
-			page_to_pfn(ptep) << PAGE_SHIFT | _PAGE_USER_TABLE);
-}
-#define pmd_pgtable(pmd) pmd_page(pmd)
-
-#endif
diff --git a/arch/unicore32/include/asm/pgtable-hwdef.h b/arch/unicore32/include/asm/pgtable-hwdef.h
deleted file mode 100644
index f28b58c61db9..000000000000
--- a/arch/unicore32/include/asm/pgtable-hwdef.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/pgtable-hwdef.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#ifndef __UNICORE_PGTABLE_HWDEF_H__
-#define __UNICORE_PGTABLE_HWDEF_H__
-
-/*
- * Hardware page table definitions.
- *
- * + Level 1 descriptor (PMD)
- *   - common
- */
-#define PMD_TYPE_MASK		(3 << 0)
-#define PMD_TYPE_TABLE		(0 << 0)
-/*#define PMD_TYPE_LARGE	(1 << 0) */
-#define PMD_TYPE_INVALID	(2 << 0)
-#define PMD_TYPE_SECT		(3 << 0)
-
-#define PMD_PRESENT		(1 << 2)
-#define PMD_YOUNG		(1 << 3)
-
-/*#define PMD_SECT_DIRTY	(1 << 4) */
-#define PMD_SECT_CACHEABLE	(1 << 5)
-#define PMD_SECT_EXEC		(1 << 6)
-#define PMD_SECT_WRITE		(1 << 7)
-#define PMD_SECT_READ		(1 << 8)
-
-/*
- * + Level 2 descriptor (PTE)
- *   - common
- */
-#define PTE_TYPE_MASK		(3 << 0)
-#define PTE_TYPE_SMALL		(0 << 0)
-#define PTE_TYPE_MIDDLE		(1 << 0)
-#define PTE_TYPE_LARGE		(2 << 0)
-#define PTE_TYPE_INVALID	(3 << 0)
-
-#define PTE_PRESENT		(1 << 2)
-#define PTE_YOUNG		(1 << 3)
-#define PTE_DIRTY		(1 << 4)
-#define PTE_CACHEABLE		(1 << 5)
-#define PTE_EXEC		(1 << 6)
-#define PTE_WRITE		(1 << 7)
-#define PTE_READ		(1 << 8)
-
-#endif
diff --git a/arch/unicore32/include/asm/pgtable.h b/arch/unicore32/include/asm/pgtable.h
deleted file mode 100644
index 97f564c8ecba..000000000000
--- a/arch/unicore32/include/asm/pgtable.h
+++ /dev/null
@@ -1,267 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/pgtable.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#ifndef __UNICORE_PGTABLE_H__
-#define __UNICORE_PGTABLE_H__
-
-#include <asm-generic/pgtable-nopmd.h>
-#include <asm/cpu-single.h>
-
-#include <asm/memory.h>
-#include <asm/pgtable-hwdef.h>
-
-/*
- * Just any arbitrary offset to the start of the vmalloc VM area: the
- * current 8MB value just means that there will be a 8MB "hole" after the
- * physical memory until the kernel virtual memory starts.  That means that
- * any out-of-bounds memory accesses will hopefully be caught.
- * The vmalloc() routines leaves a hole of 4kB between each vmalloced
- * area for the same reason. ;)
- *
- * Note that platforms may override VMALLOC_START, but they must provide
- * VMALLOC_END.  VMALLOC_END defines the (exclusive) limit of this space,
- * which may not overlap IO space.
- */
-#ifndef VMALLOC_START
-#define VMALLOC_OFFSET		SZ_8M
-#define VMALLOC_START		(((unsigned long)high_memory + VMALLOC_OFFSET) \
-					& ~(VMALLOC_OFFSET-1))
-#define VMALLOC_END		(0xff000000UL)
-#endif
-
-#define PTRS_PER_PTE		1024
-#define PTRS_PER_PGD		1024
-
-/*
- * PGDIR_SHIFT determines what a third-level page table entry can map
- */
-#define PGDIR_SHIFT		22
-
-#ifndef __ASSEMBLY__
-extern void __pte_error(const char *file, int line, unsigned long val);
-extern void __pgd_error(const char *file, int line, unsigned long val);
-
-#define pte_ERROR(pte)		__pte_error(__FILE__, __LINE__, pte_val(pte))
-#define pgd_ERROR(pgd)		__pgd_error(__FILE__, __LINE__, pgd_val(pgd))
-#endif /* !__ASSEMBLY__ */
-
-#define PGDIR_SIZE		(1UL << PGDIR_SHIFT)
-#define PGDIR_MASK		(~(PGDIR_SIZE-1))
-
-/*
- * This is the lowest virtual address we can permit any user space
- * mapping to be mapped at.  This is particularly important for
- * non-high vector CPUs.
- */
-#define FIRST_USER_ADDRESS	PAGE_SIZE
-
-#define FIRST_USER_PGD_NR	1
-#define USER_PTRS_PER_PGD	((TASK_SIZE/PGDIR_SIZE) - FIRST_USER_PGD_NR)
-
-/*
- * section address mask and size definitions.
- */
-#define SECTION_SHIFT		22
-#define SECTION_SIZE		(1UL << SECTION_SHIFT)
-#define SECTION_MASK		(~(SECTION_SIZE-1))
-
-#ifndef __ASSEMBLY__
-
-/*
- * The pgprot_* and protection_map entries will be fixed up in runtime
- * to include the cachable bits based on memory policy, as well as any
- * architecture dependent bits.
- */
-#define _PTE_DEFAULT		(PTE_PRESENT | PTE_YOUNG | PTE_CACHEABLE)
-
-extern pgprot_t pgprot_user;
-extern pgprot_t pgprot_kernel;
-
-#define PAGE_NONE		pgprot_user
-#define PAGE_SHARED		__pgprot(pgprot_val(pgprot_user | PTE_READ \
-								| PTE_WRITE))
-#define PAGE_SHARED_EXEC	__pgprot(pgprot_val(pgprot_user | PTE_READ \
-								| PTE_WRITE \
-								| PTE_EXEC))
-#define PAGE_COPY		__pgprot(pgprot_val(pgprot_user | PTE_READ)
-#define PAGE_COPY_EXEC		__pgprot(pgprot_val(pgprot_user | PTE_READ \
-								| PTE_EXEC))
-#define PAGE_READONLY		__pgprot(pgprot_val(pgprot_user | PTE_READ))
-#define PAGE_READONLY_EXEC	__pgprot(pgprot_val(pgprot_user | PTE_READ \
-								| PTE_EXEC))
-#define PAGE_KERNEL		pgprot_kernel
-#define PAGE_KERNEL_EXEC	__pgprot(pgprot_val(pgprot_kernel | PTE_EXEC))
-
-#define __PAGE_NONE		__pgprot(_PTE_DEFAULT)
-#define __PAGE_SHARED		__pgprot(_PTE_DEFAULT | PTE_READ \
-							| PTE_WRITE)
-#define __PAGE_SHARED_EXEC	__pgprot(_PTE_DEFAULT | PTE_READ \
-							| PTE_WRITE \
-							| PTE_EXEC)
-#define __PAGE_COPY		__pgprot(_PTE_DEFAULT | PTE_READ)
-#define __PAGE_COPY_EXEC	__pgprot(_PTE_DEFAULT | PTE_READ \
-							| PTE_EXEC)
-#define __PAGE_READONLY		__pgprot(_PTE_DEFAULT | PTE_READ)
-#define __PAGE_READONLY_EXEC	__pgprot(_PTE_DEFAULT | PTE_READ \
-							| PTE_EXEC)
-
-#endif /* __ASSEMBLY__ */
-
-/*
- * The table below defines the page protection levels that we insert into our
- * Linux page table version.  These get translated into the best that the
- * architecture can perform.  Note that on UniCore hardware:
- *  1) We cannot do execute protection
- *  2) If we could do execute protection, then read is implied
- *  3) write implies read permissions
- */
-#define __P000  __PAGE_NONE
-#define __P001  __PAGE_READONLY
-#define __P010  __PAGE_COPY
-#define __P011  __PAGE_COPY
-#define __P100  __PAGE_READONLY_EXEC
-#define __P101  __PAGE_READONLY_EXEC
-#define __P110  __PAGE_COPY_EXEC
-#define __P111  __PAGE_COPY_EXEC
-
-#define __S000  __PAGE_NONE
-#define __S001  __PAGE_READONLY
-#define __S010  __PAGE_SHARED
-#define __S011  __PAGE_SHARED
-#define __S100  __PAGE_READONLY_EXEC
-#define __S101  __PAGE_READONLY_EXEC
-#define __S110  __PAGE_SHARED_EXEC
-#define __S111  __PAGE_SHARED_EXEC
-
-#ifndef __ASSEMBLY__
-/*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-extern struct page *empty_zero_page;
-#define ZERO_PAGE(vaddr)		(empty_zero_page)
-
-#define pte_pfn(pte)			(pte_val(pte) >> PAGE_SHIFT)
-#define pfn_pte(pfn, prot)		(__pte(((pfn) << PAGE_SHIFT) \
-						| pgprot_val(prot)))
-
-#define pte_none(pte)			(!pte_val(pte))
-#define pte_clear(mm, addr, ptep)	set_pte(ptep, __pte(0))
-#define pte_page(pte)			(pfn_to_page(pte_pfn(pte)))
-
-#define set_pte(ptep, pte)	cpu_set_pte(ptep, pte)
-
-#define set_pte_at(mm, addr, ptep, pteval)	\
-	do {					\
-		set_pte(ptep, pteval);          \
-	} while (0)
-
-/*
- * The following only work if pte_present() is true.
- * Undefined behaviour if not..
- */
-#define pte_present(pte)	(pte_val(pte) & PTE_PRESENT)
-#define pte_write(pte)		(pte_val(pte) & PTE_WRITE)
-#define pte_dirty(pte)		(pte_val(pte) & PTE_DIRTY)
-#define pte_young(pte)		(pte_val(pte) & PTE_YOUNG)
-#define pte_exec(pte)		(pte_val(pte) & PTE_EXEC)
-
-#define PTE_BIT_FUNC(fn, op) \
-static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; }
-
-PTE_BIT_FUNC(wrprotect, &= ~PTE_WRITE);
-PTE_BIT_FUNC(mkwrite,   |= PTE_WRITE);
-PTE_BIT_FUNC(mkclean,   &= ~PTE_DIRTY);
-PTE_BIT_FUNC(mkdirty,   |= PTE_DIRTY);
-PTE_BIT_FUNC(mkold,     &= ~PTE_YOUNG);
-PTE_BIT_FUNC(mkyoung,   |= PTE_YOUNG);
-
-/*
- * Mark the prot value as uncacheable.
- */
-#define pgprot_noncached(prot)		\
-	__pgprot(pgprot_val(prot) & ~PTE_CACHEABLE)
-#define pgprot_writecombine(prot)	\
-	__pgprot(pgprot_val(prot) & ~PTE_CACHEABLE)
-
-#define pmd_none(pmd)		(!pmd_val(pmd))
-#define pmd_present(pmd)	(pmd_val(pmd) & PMD_PRESENT)
-#define pmd_bad(pmd)		(((pmd_val(pmd) &		\
-				(PMD_PRESENT | PMD_TYPE_MASK))	\
-				!= (PMD_PRESENT | PMD_TYPE_TABLE)))
-
-#define set_pmd(pmdpd, pmdval)		\
-	do {				\
-		*(pmdpd) = pmdval;	\
-	} while (0)
-
-#define pmd_clear(pmdp)			\
-	do {				\
-		set_pmd(pmdp, __pmd(0));\
-		clean_pmd_entry(pmdp);	\
-	} while (0)
-
-#define pmd_page_vaddr(pmd) ((pte_t *)__va(pmd_val(pmd) & PAGE_MASK))
-#define pmd_page(pmd)		pfn_to_page(__phys_to_pfn(pmd_val(pmd)))
-
-/*
- * Conversion functions: convert a page and protection to a page entry,
- * and a page entry and page directory to the page they refer to.
- */
-#define mk_pte(page, prot)	pfn_pte(page_to_pfn(page), prot)
-
-static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
-{
-	const unsigned long mask = PTE_EXEC | PTE_WRITE | PTE_READ;
-	pte_val(pte) = (pte_val(pte) & ~mask) | (pgprot_val(newprot) & mask);
-	return pte;
-}
-
-extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
-
-/*
- * Encode and decode a swap entry.  Swap entries are stored in the Linux
- * page tables as follows:
- *
- *   3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
- *   1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- *   <--------------- offset --------------> <--- type --> 0 0 0 0 0
- *
- * This gives us up to 127 swap files and 32GB per swap file.  Note that
- * the offset field is always non-zero.
- */
-#define __SWP_TYPE_SHIFT	5
-#define __SWP_TYPE_BITS		7
-#define __SWP_TYPE_MASK		((1 << __SWP_TYPE_BITS) - 1)
-#define __SWP_OFFSET_SHIFT	(__SWP_TYPE_BITS + __SWP_TYPE_SHIFT)
-
-#define __swp_type(x)		(((x).val >> __SWP_TYPE_SHIFT)		\
-				& __SWP_TYPE_MASK)
-#define __swp_offset(x)		((x).val >> __SWP_OFFSET_SHIFT)
-#define __swp_entry(type, offset) ((swp_entry_t) {			\
-				((type) << __SWP_TYPE_SHIFT) |		\
-				((offset) << __SWP_OFFSET_SHIFT) })
-
-#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
-#define __swp_entry_to_pte(swp)	((pte_t) { (swp).val })
-
-/*
- * It is an error for the kernel to have more swap files than we can
- * encode in the PTEs.  This ensures that we know when MAX_SWAPFILES
- * is increased beyond what we presently support.
- */
-#define MAX_SWAPFILES_CHECK()	\
-	BUILD_BUG_ON(MAX_SWAPFILES_SHIFT > __SWP_TYPE_BITS)
-
-/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
-/* FIXME: this is not correct */
-#define kern_addr_valid(addr)	(1)
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* __UNICORE_PGTABLE_H__ */
diff --git a/arch/unicore32/include/asm/processor.h b/arch/unicore32/include/asm/processor.h
deleted file mode 100644
index 6f01620da3d1..000000000000
--- a/arch/unicore32/include/asm/processor.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/processor.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-
-#ifndef __UNICORE_PROCESSOR_H__
-#define __UNICORE_PROCESSOR_H__
-
-#ifdef __KERNEL__
-
-#include <asm/ptrace.h>
-#include <asm/types.h>
-
-#ifdef __KERNEL__
-#define STACK_TOP	TASK_SIZE
-#define STACK_TOP_MAX	TASK_SIZE
-#endif
-
-struct debug_entry {
-	u32			address;
-	u32			insn;
-};
-
-struct debug_info {
-	int			nsaved;
-	struct debug_entry	bp[2];
-};
-
-struct thread_struct {
-							/* fault info	  */
-	unsigned long		address;
-	unsigned long		trap_no;
-	unsigned long		error_code;
-							/* debugging	  */
-	struct debug_info	debug;
-};
-
-#define INIT_THREAD  {	}
-
-#define start_thread(regs, pc, sp)					\
-({									\
-	unsigned long *stack = (unsigned long *)sp;			\
-	memset(regs->uregs, 0, sizeof(regs->uregs));			\
-	regs->UCreg_asr = USER_MODE;					\
-	regs->UCreg_pc = pc & ~1;	/* pc */                        \
-	regs->UCreg_sp = sp;		/* sp */                        \
-	regs->UCreg_02 = stack[2];	/* r2 (envp) */                 \
-	regs->UCreg_01 = stack[1];	/* r1 (argv) */                 \
-	regs->UCreg_00 = stack[0];	/* r0 (argc) */                 \
-})
-
-/* Forward declaration, a strange C thing */
-struct task_struct;
-
-/* Free all resources held by a thread. */
-extern void release_thread(struct task_struct *);
-
-unsigned long get_wchan(struct task_struct *p);
-
-#define cpu_relax()			barrier()
-
-#define task_pt_regs(p) \
-	((struct pt_regs *)(THREAD_START_SP + task_stack_page(p)) - 1)
-
-#define KSTK_EIP(tsk)	(task_pt_regs(tsk)->UCreg_pc)
-#define KSTK_ESP(tsk)	(task_pt_regs(tsk)->UCreg_sp)
-
-#endif
-
-#endif /* __UNICORE_PROCESSOR_H__ */
diff --git a/arch/unicore32/include/asm/ptrace.h b/arch/unicore32/include/asm/ptrace.h
deleted file mode 100644
index bb4cbc42c321..000000000000
--- a/arch/unicore32/include/asm/ptrace.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/ptrace.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#ifndef __UNICORE_PTRACE_H__
-#define __UNICORE_PTRACE_H__
-
-#include <uapi/asm/ptrace.h>
-
-#ifndef __ASSEMBLY__
-
-#define user_mode(regs)	\
-	(processor_mode(regs) == USER_MODE)
-
-#define processor_mode(regs) \
-	((regs)->UCreg_asr & MODE_MASK)
-
-#define interrupts_enabled(regs) \
-	(!((regs)->UCreg_asr & PSR_I_BIT))
-
-#define fast_interrupts_enabled(regs) \
-	(!((regs)->UCreg_asr & PSR_R_BIT))
-
-/* Are the current registers suitable for user mode?
- * (used to maintain security in signal handlers)
- */
-static inline int valid_user_regs(struct pt_regs *regs)
-{
-	unsigned long mode = regs->UCreg_asr & MODE_MASK;
-
-	/*
-	 * Always clear the R (REAL) bits
-	 */
-	regs->UCreg_asr &= ~(PSR_R_BIT);
-
-	if ((regs->UCreg_asr & PSR_I_BIT) == 0) {
-		if (mode == USER_MODE)
-			return 1;
-	}
-
-	/*
-	 * Force ASR to something logical...
-	 */
-	regs->UCreg_asr &= PSR_f | USER_MODE;
-
-	return 0;
-}
-
-#define instruction_pointer(regs)	((regs)->UCreg_pc)
-#define user_stack_pointer(regs)	((regs)->UCreg_sp)
-#define profile_pc(regs)		instruction_pointer(regs)
-
-#endif /* __ASSEMBLY__ */
-#endif
diff --git a/arch/unicore32/include/asm/stacktrace.h b/arch/unicore32/include/asm/stacktrace.h
deleted file mode 100644
index 3e59f9d2faed..000000000000
--- a/arch/unicore32/include/asm/stacktrace.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/stacktrace.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-
-#ifndef __UNICORE_STACKTRACE_H__
-#define __UNICORE_STACKTRACE_H__
-
-struct stackframe {
-	unsigned long fp;
-	unsigned long sp;
-	unsigned long lr;
-	unsigned long pc;
-};
-
-#ifdef CONFIG_FRAME_POINTER
-extern int unwind_frame(struct stackframe *frame);
-#else
-#define unwind_frame(f) (-EINVAL)
-#endif
-extern void walk_stackframe(struct stackframe *frame,
-			    int (*fn)(struct stackframe *, void *), void *data);
-
-#endif	/* __UNICORE_STACKTRACE_H__ */
diff --git a/arch/unicore32/include/asm/string.h b/arch/unicore32/include/asm/string.h
deleted file mode 100644
index 1649b0e4271b..000000000000
--- a/arch/unicore32/include/asm/string.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/string.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#ifndef __UNICORE_STRING_H__
-#define __UNICORE_STRING_H__
-
-/*
- * We don't do inline string functions, since the
- * optimised inline asm versions are not small.
- */
-
-#define __HAVE_ARCH_STRRCHR
-extern char *strrchr(const char *s, int c);
-
-#define __HAVE_ARCH_STRCHR
-extern char *strchr(const char *s, int c);
-
-#define __HAVE_ARCH_MEMCPY
-extern void *memcpy(void *, const void *, __kernel_size_t);
-
-#define __HAVE_ARCH_MEMMOVE
-extern void *memmove(void *, const void *, __kernel_size_t);
-
-#define __HAVE_ARCH_MEMCHR
-extern void *memchr(const void *, int, __kernel_size_t);
-
-#define __HAVE_ARCH_MEMSET
-extern void *memset(void *, int, __kernel_size_t);
-
-#endif
diff --git a/arch/unicore32/include/asm/suspend.h b/arch/unicore32/include/asm/suspend.h
deleted file mode 100644
index 72bd89c44d10..000000000000
--- a/arch/unicore32/include/asm/suspend.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/suspend.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-
-#ifndef __UNICORE_SUSPEND_H__
-#define __UNICORE_SUSPEND_H__
-
-#ifndef __ASSEMBLY__
-
-#include <asm/ptrace.h>
-
-struct swsusp_arch_regs {
-	struct cpu_context_save	cpu_context;	/* cpu context */
-#ifdef CONFIG_UNICORE_FPU_F64
-	struct fp_state		fpstate __attribute__((aligned(8)));
-#endif
-};
-#endif
-
-#endif /* __UNICORE_SUSPEND_H__ */
-
diff --git a/arch/unicore32/include/asm/switch_to.h b/arch/unicore32/include/asm/switch_to.h
deleted file mode 100644
index 12e534b3bfa5..000000000000
--- a/arch/unicore32/include/asm/switch_to.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Task switching for PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2012 GUAN Xue-tao
- */
-#ifndef __UNICORE_SWITCH_TO_H__
-#define __UNICORE_SWITCH_TO_H__
-
-struct task_struct;
-struct thread_info;
-
-/*
- * switch_to(prev, next) should switch from task `prev' to `next'
- * `prev' will never be the same as `next'.  schedule() itself
- * contains the memory barrier to tell GCC not to cache `current'.
- */
-extern struct task_struct *__switch_to(struct task_struct *,
-		struct thread_info *, struct thread_info *);
-
-#define switch_to(prev, next, last)					\
-	do {								\
-		last = __switch_to(prev, task_thread_info(prev),	\
-					task_thread_info(next));	\
-	} while (0)
-
-#endif /* __UNICORE_SWITCH_TO_H__ */
diff --git a/arch/unicore32/include/asm/syscall.h b/arch/unicore32/include/asm/syscall.h
deleted file mode 100644
index 607961797fff..000000000000
--- a/arch/unicore32/include/asm/syscall.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ASM_UNICORE_SYSCALL_H
-#define _ASM_UNICORE_SYSCALL_H
-
-#include <uapi/linux/audit.h>
-
-static inline int syscall_get_arch(struct task_struct *task)
-{
-	return AUDIT_ARCH_UNICORE;
-}
-
-#endif	/* _ASM_UNICORE_SYSCALL_H */
diff --git a/arch/unicore32/include/asm/thread_info.h b/arch/unicore32/include/asm/thread_info.h
deleted file mode 100644
index d8a6d6b7a403..000000000000
--- a/arch/unicore32/include/asm/thread_info.h
+++ /dev/null
@@ -1,133 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/thread_info.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#ifndef __UNICORE_THREAD_INFO_H__
-#define __UNICORE_THREAD_INFO_H__
-
-#ifdef __KERNEL__
-
-#include <linux/compiler.h>
-#include <asm/fpstate.h>
-
-#define THREAD_SIZE_ORDER	1
-#define THREAD_SIZE		8192
-#define THREAD_START_SP		(THREAD_SIZE - 8)
-
-#ifndef __ASSEMBLY__
-
-struct task_struct;
-
-#include <asm/types.h>
-
-typedef struct {
-	unsigned long seg;
-} mm_segment_t;
-
-struct cpu_context_save {
-	__u32	r4;
-	__u32	r5;
-	__u32	r6;
-	__u32	r7;
-	__u32	r8;
-	__u32	r9;
-	__u32	r10;
-	__u32	r11;
-	__u32	r12;
-	__u32	r13;
-	__u32	r14;
-	__u32	r15;
-	__u32	r16;
-	__u32	r17;
-	__u32	r18;
-	__u32	r19;
-	__u32	r20;
-	__u32	r21;
-	__u32	r22;
-	__u32	r23;
-	__u32	r24;
-	__u32	r25;
-	__u32	r26;
-	__u32	fp;
-	__u32	sp;
-	__u32	pc;
-};
-
-/*
- * low level task data that entry.S needs immediate access to.
- * __switch_to() assumes cpu_context follows immediately after cpu_domain.
- */
-struct thread_info {
-	unsigned long		flags;		/* low level flags */
-	int			preempt_count;	/* 0 => preemptable */
-						/* <0 => bug */
-	mm_segment_t		addr_limit;	/* address limit */
-	struct task_struct	*task;		/* main task structure */
-	__u32			cpu;		/* cpu */
-	struct cpu_context_save	cpu_context;	/* cpu context */
-	__u32			syscall;	/* syscall number */
-	__u8			used_cp[16];	/* thread used copro */
-#ifdef CONFIG_UNICORE_FPU_F64
-	struct fp_state		fpstate __attribute__((aligned(8)));
-#endif
-};
-
-#define INIT_THREAD_INFO(tsk)						\
-{									\
-	.task		= &tsk,						\
-	.flags		= 0,						\
-	.preempt_count	= INIT_PREEMPT_COUNT,				\
-	.addr_limit	= KERNEL_DS,					\
-}
-
-/*
- * how to get the thread information struct from C
- */
-static inline struct thread_info *current_thread_info(void) __attribute_const__;
-
-static inline struct thread_info *current_thread_info(void)
-{
-	register unsigned long sp asm ("sp");
-	return (struct thread_info *)(sp & ~(THREAD_SIZE - 1));
-}
-
-#define thread_saved_pc(tsk)	\
-	((unsigned long)(task_thread_info(tsk)->cpu_context.pc))
-#define thread_saved_sp(tsk)	\
-	((unsigned long)(task_thread_info(tsk)->cpu_context.sp))
-#define thread_saved_fp(tsk)	\
-	((unsigned long)(task_thread_info(tsk)->cpu_context.fp))
-
-#endif
-
-/*
- * thread information flags:
- *  TIF_SYSCALL_TRACE	- syscall trace active
- *  TIF_SIGPENDING	- signal pending
- *  TIF_NEED_RESCHED	- rescheduling necessary
- *  TIF_NOTIFY_RESUME	- callback before returning to user
- */
-#define TIF_SIGPENDING		0
-#define TIF_NEED_RESCHED	1
-#define TIF_NOTIFY_RESUME	2	/* callback before returning to user */
-#define TIF_SYSCALL_TRACE	8
-#define TIF_MEMDIE		18
-#define TIF_RESTORE_SIGMASK	20
-
-#define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
-#define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
-#define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
-#define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
-
-/*
- * Change these and you break ASM code in entry-common.S
- */
-#define _TIF_WORK_MASK \
-	(_TIF_SIGPENDING | _TIF_NEED_RESCHED | _TIF_NOTIFY_RESUME)
-
-#endif /* __KERNEL__ */
-#endif /* __UNICORE_THREAD_INFO_H__ */
diff --git a/arch/unicore32/include/asm/timex.h b/arch/unicore32/include/asm/timex.h
deleted file mode 100644
index d714af3dbce1..000000000000
--- a/arch/unicore32/include/asm/timex.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/timex.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-
-#ifndef __UNICORE_TIMEX_H__
-#define __UNICORE_TIMEX_H__
-
-#ifdef	CONFIG_ARCH_FPGA
-
-/* in FPGA, APB clock is 33M, and OST clock is 32K, */
-/* so, 1M is selected for timer interrupt correctly */
-#define	CLOCK_TICK_RATE		(32*1024)
-
-#endif
-
-#if defined(CONFIG_PUV3_DB0913)		\
-	|| defined(CONFIG_PUV3_NB0916)	\
-	|| defined(CONFIG_PUV3_SMW0919)
-
-#define  CLOCK_TICK_RATE         (14318000)
-
-#endif
-
-#include <asm-generic/timex.h>
-
-#endif
diff --git a/arch/unicore32/include/asm/tlb.h b/arch/unicore32/include/asm/tlb.h
deleted file mode 100644
index 4663d8cc80ef..000000000000
--- a/arch/unicore32/include/asm/tlb.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/tlb.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#ifndef __UNICORE_TLB_H__
-#define __UNICORE_TLB_H__
-
-/*
- * unicore32 lacks an efficient flush_tlb_range(), use flush_tlb_mm().
- */
-
-#define __pte_free_tlb(tlb, pte, addr)				\
-	do {							\
-		pgtable_pte_page_dtor(pte);			\
-		tlb_remove_page((tlb), (pte));			\
-	} while (0)
-
-#include <asm-generic/tlb.h>
-
-#endif
diff --git a/arch/unicore32/include/asm/tlbflush.h b/arch/unicore32/include/asm/tlbflush.h
deleted file mode 100644
index 1cf18ef55515..000000000000
--- a/arch/unicore32/include/asm/tlbflush.h
+++ /dev/null
@@ -1,192 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/tlbflush.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#ifndef __UNICORE_TLBFLUSH_H__
-#define __UNICORE_TLBFLUSH_H__
-
-#ifndef __ASSEMBLY__
-
-#include <linux/sched.h>
-
-extern void __cpu_flush_user_tlb_range(unsigned long, unsigned long,
-					struct vm_area_struct *);
-extern void __cpu_flush_kern_tlb_range(unsigned long, unsigned long);
-
-/*
- *	TLB Management
- *	==============
- *
- *	The arch/unicore/mm/tlb-*.S files implement these methods.
- *
- *	The TLB specific code is expected to perform whatever tests it
- *	needs to determine if it should invalidate the TLB for each
- *	call.  Start addresses are inclusive and end addresses are
- *	exclusive; it is safe to round these addresses down.
- *
- *	flush_tlb_all()
- *
- *		Invalidate the entire TLB.
- *
- *	flush_tlb_mm(mm)
- *
- *		Invalidate all TLB entries in a particular address
- *		space.
- *		- mm	- mm_struct describing address space
- *
- *	flush_tlb_range(mm,start,end)
- *
- *		Invalidate a range of TLB entries in the specified
- *		address space.
- *		- mm	- mm_struct describing address space
- *		- start - start address (may not be aligned)
- *		- end	- end address (exclusive, may not be aligned)
- *
- *	flush_tlb_page(vaddr,vma)
- *
- *		Invalidate the specified page in the specified address range.
- *		- vaddr - virtual address (may not be aligned)
- *		- vma	- vma_struct describing address range
- *
- *	flush_kern_tlb_page(kaddr)
- *
- *		Invalidate the TLB entry for the specified page.  The address
- *		will be in the kernels virtual memory space.  Current uses
- *		only require the D-TLB to be invalidated.
- *		- kaddr - Kernel virtual memory address
- */
-
-static inline void local_flush_tlb_all(void)
-{
-	const int zero = 0;
-
-	/* TLB invalidate all */
-	asm("movc p0.c6, %0, #6; nop; nop; nop; nop; nop; nop; nop; nop"
-		: : "r" (zero) : "cc");
-}
-
-static inline void local_flush_tlb_mm(struct mm_struct *mm)
-{
-	const int zero = 0;
-
-	if (cpumask_test_cpu(get_cpu(), mm_cpumask(mm))) {
-		/* TLB invalidate all */
-		asm("movc p0.c6, %0, #6; nop; nop; nop; nop; nop; nop; nop; nop"
-			: : "r" (zero) : "cc");
-	}
-	put_cpu();
-}
-
-static inline void
-local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
-{
-	if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
-#ifndef CONFIG_CPU_TLB_SINGLE_ENTRY_DISABLE
-		/* iTLB invalidate page */
-		asm("movc p0.c6, %0, #5; nop; nop; nop; nop; nop; nop; nop; nop"
-			: : "r" (uaddr & PAGE_MASK) : "cc");
-		/* dTLB invalidate page */
-		asm("movc p0.c6, %0, #3; nop; nop; nop; nop; nop; nop; nop; nop"
-			: : "r" (uaddr & PAGE_MASK) : "cc");
-#else
-		/* TLB invalidate all */
-		asm("movc p0.c6, %0, #6; nop; nop; nop; nop; nop; nop; nop; nop"
-			: : "r" (uaddr & PAGE_MASK) : "cc");
-#endif
-	}
-}
-
-static inline void local_flush_tlb_kernel_page(unsigned long kaddr)
-{
-#ifndef CONFIG_CPU_TLB_SINGLE_ENTRY_DISABLE
-	/* iTLB invalidate page */
-	asm("movc p0.c6, %0, #5; nop; nop; nop; nop; nop; nop; nop; nop"
-		: : "r" (kaddr & PAGE_MASK) : "cc");
-	/* dTLB invalidate page */
-	asm("movc p0.c6, %0, #3; nop; nop; nop; nop; nop; nop; nop; nop"
-		: : "r" (kaddr & PAGE_MASK) : "cc");
-#else
-	/* TLB invalidate all */
-	asm("movc p0.c6, %0, #6; nop; nop; nop; nop; nop; nop; nop; nop"
-		: : "r" (kaddr & PAGE_MASK) : "cc");
-#endif
-}
-
-/*
- *	flush_pmd_entry
- *
- *	Flush a PMD entry (word aligned, or double-word aligned) to
- *	RAM if the TLB for the CPU we are running on requires this.
- *	This is typically used when we are creating PMD entries.
- *
- *	clean_pmd_entry
- *
- *	Clean (but don't drain the write buffer) if the CPU requires
- *	these operations.  This is typically used when we are removing
- *	PMD entries.
- */
-static inline void flush_pmd_entry(pmd_t *pmd)
-{
-#ifndef CONFIG_CPU_DCACHE_LINE_DISABLE
-	/* flush dcache line, see dcacheline_flush in proc-macros.S */
-	asm("mov	r1, %0 << #20\n"
-		"ldw	r2, =_stext\n"
-		"add	r2, r2, r1 >> #20\n"
-		"ldw	r1, [r2+], #0x0000\n"
-		"ldw	r1, [r2+], #0x1000\n"
-		"ldw	r1, [r2+], #0x2000\n"
-		"ldw	r1, [r2+], #0x3000\n"
-		: : "r" (pmd) : "r1", "r2");
-#else
-	/* flush dcache all */
-	asm("movc p0.c5, %0, #14; nop; nop; nop; nop; nop; nop; nop; nop"
-		: : "r" (pmd) : "cc");
-#endif
-}
-
-static inline void clean_pmd_entry(pmd_t *pmd)
-{
-#ifndef CONFIG_CPU_DCACHE_LINE_DISABLE
-	/* clean dcache line */
-	asm("movc p0.c5, %0, #11; nop; nop; nop; nop; nop; nop; nop; nop"
-		: : "r" (__pa(pmd) & ~(L1_CACHE_BYTES - 1)) : "cc");
-#else
-	/* clean dcache all */
-	asm("movc p0.c5, %0, #10; nop; nop; nop; nop; nop; nop; nop; nop"
-		: : "r" (pmd) : "cc");
-#endif
-}
-
-/*
- * Convert calls to our calling convention.
- */
-#define local_flush_tlb_range(vma, start, end)	\
-	__cpu_flush_user_tlb_range(start, end, vma)
-#define local_flush_tlb_kernel_range(s, e)	\
-	__cpu_flush_kern_tlb_range(s, e)
-
-#define flush_tlb_all		local_flush_tlb_all
-#define flush_tlb_mm		local_flush_tlb_mm
-#define flush_tlb_page		local_flush_tlb_page
-#define flush_tlb_kernel_page	local_flush_tlb_kernel_page
-#define flush_tlb_range		local_flush_tlb_range
-#define flush_tlb_kernel_range	local_flush_tlb_kernel_range
-
-/*
- * if PG_dcache_clean is not set for the page, we need to ensure that any
- * cache entries for the kernels virtual memory range are written
- * back to the page.
- */
-extern void update_mmu_cache(struct vm_area_struct *vma,
-		unsigned long addr, pte_t *ptep);
-
-extern void do_bad_area(unsigned long addr, unsigned int fsr,
-		struct pt_regs *regs);
-
-#endif
-
-#endif
diff --git a/arch/unicore32/include/asm/traps.h b/arch/unicore32/include/asm/traps.h
deleted file mode 100644
index ad1508a9a903..000000000000
--- a/arch/unicore32/include/asm/traps.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/traps.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#ifndef __UNICORE_TRAP_H__
-#define __UNICORE_TRAP_H__
-
-extern void __init early_trap_init(void);
-extern void dump_backtrace_entry(unsigned long where,
-		unsigned long from, unsigned long frame);
-
-extern void do_DataAbort(unsigned long addr, unsigned int fsr,
-		 struct pt_regs *regs);
-#endif
diff --git a/arch/unicore32/include/asm/uaccess.h b/arch/unicore32/include/asm/uaccess.h
deleted file mode 100644
index 33c24f430511..000000000000
--- a/arch/unicore32/include/asm/uaccess.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/asm/uaccess.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#ifndef __UNICORE_UACCESS_H__
-#define __UNICORE_UACCESS_H__
-
-#include <asm/memory.h>
-
-#define __strncpy_from_user	__strncpy_from_user
-#define __strnlen_user		__strnlen_user
-#define __clear_user		__clear_user
-
-#define __kernel_ok		(uaccess_kernel())
-#define __user_ok(addr, size)	(((size) <= TASK_SIZE)			\
-				&& ((addr) <= TASK_SIZE - (size)))
-#define __access_ok(addr, size)	(__kernel_ok || __user_ok((addr), (size)))
-
-extern unsigned long __must_check
-raw_copy_from_user(void *to, const void __user *from, unsigned long n);
-extern unsigned long __must_check
-raw_copy_to_user(void __user *to, const void *from, unsigned long n);
-extern unsigned long __must_check
-__clear_user(void __user *addr, unsigned long n);
-extern unsigned long __must_check
-__strncpy_from_user(char *to, const char __user *from, unsigned long count);
-extern unsigned long
-__strnlen_user(const char __user *s, long n);
-#define INLINE_COPY_FROM_USER
-#define INLINE_COPY_TO_USER
-
-#include <asm-generic/uaccess.h>
-
-#endif /* __UNICORE_UACCESS_H__ */
diff --git a/arch/unicore32/include/asm/vmalloc.h b/arch/unicore32/include/asm/vmalloc.h
deleted file mode 100644
index 054435818a14..000000000000
--- a/arch/unicore32/include/asm/vmalloc.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef _ASM_UNICORE32_VMALLOC_H
-#define _ASM_UNICORE32_VMALLOC_H
-
-#endif /* _ASM_UNICORE32_VMALLOC_H */
diff --git a/arch/unicore32/include/mach/PKUnity.h b/arch/unicore32/include/mach/PKUnity.h
deleted file mode 100644
index 78f77517c1c7..000000000000
--- a/arch/unicore32/include/mach/PKUnity.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/mach/PKUnity.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-
-/* Be sure that virtual mapping is defined right */
-#ifndef __MACH_PUV3_HARDWARE_H__
-#error You must include hardware.h not PKUnity.h
-#endif
-
-#include <mach/bitfield.h>
-
-/*
- * Memory Definitions
- */
-#define PKUNITY_SDRAM_BASE		0x00000000 /* 0x00000000 - 0x7FFFFFFF 2GB */
-#define PKUNITY_MMIO_BASE		0x80000000 /* 0x80000000 - 0xFFFFFFFF 2GB */
-
-/*
- * PKUNITY System Bus Addresses (PCI): 0x80000000 - 0xBFFFFFFF (1GB)
- * 0x80000000 - 0x8000000B 12B    PCI Configuration regs
- * 0x80010000 - 0x80010250 592B   PCI Bridge Base
- * 0x80030000 - 0x8003FFFF 64KB   PCI Legacy IO
- * 0x90000000 - 0x97FFFFFF 128MB  PCI AHB-PCI MEM-mapping
- * 0x98000000 - 0x9FFFFFFF 128MB  PCI PCI-AHB MEM-mapping
- */
-#define PKUNITY_PCI_BASE		io_p2v(0x80000000) /* 0x80000000 - 0xBFFFFFFF 1GB */
-#include <mach/regs-pci.h>
-
-#define PKUNITY_PCICFG_BASE		(PKUNITY_PCI_BASE + 0x0)
-#define PKUNITY_PCIBRI_BASE		(PKUNITY_PCI_BASE + 0x00010000)
-#define PKUNITY_PCILIO_BASE		(PKUNITY_PCI_BASE + 0x00030000)
-#define PKUNITY_PCIMEM_BASE		(PKUNITY_PCI_BASE + 0x10000000)
-#define PKUNITY_PCIAHB_BASE		(PKUNITY_PCI_BASE + 0x18000000)
-
-/*
- * PKUNITY System Bus Addresses (AHB): 0xC0000000 - 0xEDFFFFFF (640MB)
- */
-#define PKUNITY_AHB_BASE		io_p2v(0xC0000000)
-
-/* AHB-0 is DDR2 SDRAM */
-/* AHB-1 is PCI Space */
-#define PKUNITY_ARBITER_BASE		(PKUNITY_AHB_BASE + 0x000000) /* AHB-2 */
-#define PKUNITY_DDR2CTRL_BASE		(PKUNITY_AHB_BASE + 0x100000) /* AHB-3 */
-#define PKUNITY_DMAC_BASE		(PKUNITY_AHB_BASE + 0x200000) /* AHB-4 */
-#include <mach/regs-dmac.h>
-#define PKUNITY_UMAL_BASE		(PKUNITY_AHB_BASE + 0x300000) /* AHB-5 */
-#include <mach/regs-umal.h>
-#define PKUNITY_USB_BASE		(PKUNITY_AHB_BASE + 0x400000) /* AHB-6 */
-#define PKUNITY_SATA_BASE		(PKUNITY_AHB_BASE + 0x500000) /* AHB-7 */
-#define PKUNITY_SMC_BASE		(PKUNITY_AHB_BASE + 0x600000) /* AHB-8 */
-/* AHB-9 is for APB bridge */
-#define PKUNITY_MME_BASE		(PKUNITY_AHB_BASE + 0x700000) /* AHB-10 */
-#define PKUNITY_UNIGFX_BASE		(PKUNITY_AHB_BASE + 0x800000) /* AHB-11 */
-#include <mach/regs-unigfx.h>
-#define PKUNITY_NAND_BASE		(PKUNITY_AHB_BASE + 0x900000) /* AHB-12 */
-#include <mach/regs-nand.h>
-#define PKUNITY_H264D_BASE		(PKUNITY_AHB_BASE + 0xA00000) /* AHB-13 */
-#define PKUNITY_H264E_BASE		(PKUNITY_AHB_BASE + 0xB00000) /* AHB-14 */
-
-/*
- * PKUNITY Peripheral Bus Addresses (APB): 0xEE000000 - 0xEFFFFFFF (128MB)
- */
-#define PKUNITY_APB_BASE		io_p2v(0xEE000000)
-
-#define PKUNITY_UART0_BASE		(PKUNITY_APB_BASE + 0x000000) /* APB-0 */
-#define PKUNITY_UART1_BASE		(PKUNITY_APB_BASE + 0x100000) /* APB-1 */
-#include <mach/regs-uart.h>
-#define PKUNITY_I2C_BASE		(PKUNITY_APB_BASE + 0x200000) /* APB-2 */
-#include <mach/regs-i2c.h>
-#define PKUNITY_SPI_BASE		(PKUNITY_APB_BASE + 0x300000) /* APB-3 */
-#include <mach/regs-spi.h>
-#define PKUNITY_AC97_BASE		(PKUNITY_APB_BASE + 0x400000) /* APB-4 */
-#include <mach/regs-ac97.h>
-#define PKUNITY_GPIO_BASE		(PKUNITY_APB_BASE + 0x500000) /* APB-5 */
-#include <mach/regs-gpio.h>
-#define PKUNITY_INTC_BASE		(PKUNITY_APB_BASE + 0x600000) /* APB-6 */
-#include <mach/regs-intc.h>
-#define PKUNITY_RTC_BASE		(PKUNITY_APB_BASE + 0x700000) /* APB-7 */
-#include <mach/regs-rtc.h>
-#define PKUNITY_OST_BASE		(PKUNITY_APB_BASE + 0x800000) /* APB-8 */
-#include <mach/regs-ost.h>
-#define PKUNITY_RESETC_BASE		(PKUNITY_APB_BASE + 0x900000) /* APB-9 */
-#include <mach/regs-resetc.h>
-#define PKUNITY_PM_BASE			(PKUNITY_APB_BASE + 0xA00000) /* APB-10 */
-#include <mach/regs-pm.h>
-#define PKUNITY_PS2_BASE		(PKUNITY_APB_BASE + 0xB00000) /* APB-11 */
-#include <mach/regs-ps2.h>
-#define PKUNITY_SDC_BASE		(PKUNITY_APB_BASE + 0xC00000) /* APB-12 */
-#include <mach/regs-sdc.h>
-
diff --git a/arch/unicore32/include/mach/bitfield.h b/arch/unicore32/include/mach/bitfield.h
deleted file mode 100644
index 766b7f01f1cd..000000000000
--- a/arch/unicore32/include/mach/bitfield.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/mach/bitfield.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#ifndef __MACH_PUV3_BITFIELD_H__
-#define __MACH_PUV3_BITFIELD_H__
-
-#ifndef __ASSEMBLY__
-#define UData(Data)	((unsigned long) (Data))
-#else
-#define UData(Data)	(Data)
-#endif
-
-#define FIELD(val, vmask, vshift)	(((val) & ((UData(1) << (vmask)) - 1)) << (vshift))
-#define FMASK(vmask, vshift)		(((UData(1) << (vmask)) - 1) << (vshift))
-
-#endif /* __MACH_PUV3_BITFIELD_H__ */
diff --git a/arch/unicore32/include/mach/dma.h b/arch/unicore32/include/mach/dma.h
deleted file mode 100644
index 271001cd13c4..000000000000
--- a/arch/unicore32/include/mach/dma.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/mach/dma.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#ifndef __MACH_PUV3_DMA_H__
-#define __MACH_PUV3_DMA_H__
-
-/*
- * The PKUnity has six internal DMA channels.
- */
-#define MAX_DMA_CHANNELS	6
-
-typedef enum {
-	DMA_PRIO_HIGH = 0,
-	DMA_PRIO_MEDIUM = 1,
-	DMA_PRIO_LOW = 2
-} puv3_dma_prio;
-
-/*
- * DMA registration
- */
-
-extern int puv3_request_dma(char *name,
-			 puv3_dma_prio prio,
-			 void (*irq_handler)(int, void *),
-			 void (*err_handler)(int, void *),
-			 void *data);
-
-extern void puv3_free_dma(int dma_ch);
-
-static inline void puv3_stop_dma(int ch)
-{
-	writel(readl(DMAC_CONFIG(ch)) & ~DMAC_CONFIG_EN, DMAC_CONFIG(ch));
-}
-
-static inline void puv3_resume_dma(int ch)
-{
-	writel(readl(DMAC_CONFIG(ch)) | DMAC_CONFIG_EN, DMAC_CONFIG(ch));
-}
-
-#endif /* __MACH_PUV3_DMA_H__ */
diff --git a/arch/unicore32/include/mach/hardware.h b/arch/unicore32/include/mach/hardware.h
deleted file mode 100644
index 2d7571cbd1d0..000000000000
--- a/arch/unicore32/include/mach/hardware.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/mach/hardware.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- *
- * This file contains the hardware definitions for PKUnity architecture
- */
-
-#ifndef __MACH_PUV3_HARDWARE_H__
-#define __MACH_PUV3_HARDWARE_H__
-
-#include <mach/PKUnity.h>
-
-#ifndef __ASSEMBLY__
-#define io_p2v(x)	(void __iomem *)((x) - PKUNITY_MMIO_BASE)
-#define io_v2p(x)	(phys_addr_t)((x) + PKUNITY_MMIO_BASE)
-#else
-#define io_p2v(x)	((x) - PKUNITY_MMIO_BASE)
-#define io_v2p(x)	((x) + PKUNITY_MMIO_BASE)
-#endif
-
-#define PCIBIOS_MIN_IO			0x4000 /* should lower than 64KB */
-#define PCIBIOS_MIN_MEM			io_v2p(PKUNITY_PCIMEM_BASE)
-
-#define pcibios_assign_all_busses()	1
-
-#endif  /* __MACH_PUV3_HARDWARE_H__ */
diff --git a/arch/unicore32/include/mach/map.h b/arch/unicore32/include/mach/map.h
deleted file mode 100644
index 7a83eeeb1287..000000000000
--- a/arch/unicore32/include/mach/map.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/mach/map.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- *
- *  Page table mapping constructs and function prototypes
- */
-#define MT_DEVICE		0
-#define MT_DEVICE_CACHED	2
-#define MT_KUSER		7
-#define MT_HIGH_VECTORS		8
-#define MT_MEMORY		9
-#define MT_ROM			10
-
diff --git a/arch/unicore32/include/mach/memory.h b/arch/unicore32/include/mach/memory.h
deleted file mode 100644
index b4e6035cb9a3..000000000000
--- a/arch/unicore32/include/mach/memory.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/mach/memory.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#ifndef __MACH_PUV3_MEMORY_H__
-#define __MACH_PUV3_MEMORY_H__
-
-#include <mach/hardware.h>
-
-/* Physical DRAM offset. */
-#define PHYS_OFFSET	UL(0x00000000)
-/* The base address of exception vectors. */
-#define VECTORS_BASE	UL(0xffff0000)
-/* The base address of kuser area. */
-#define KUSER_BASE	UL(0x80000000)
-
-#ifdef __ASSEMBLY__
-/* The byte offset of the kernel image in RAM from the start of RAM. */
-#define KERNEL_IMAGE_START	0x00408000
-#endif
-
-#if !defined(__ASSEMBLY__) && defined(CONFIG_PCI)
-
-void puv3_pci_adjust_zones(unsigned long *max_zone_pfn);
-
-#define arch_adjust_zones(max_zone_pfn) \
-	puv3_pci_adjust_zones(max_zone_pfn)
-
-#endif
-
-/*
- * PCI controller in PKUnity-3 masks highest 5-bit for upstream channel,
- * so we must limit the DMA allocation within 128M physical memory for
- * supporting PCI devices.
- */
-#define PCI_DMA_THRESHOLD	(PHYS_OFFSET + SZ_128M - 1)
-
-#define is_pcibus_device(dev)	(dev &&			\
-				(strncmp(dev->bus->name, "pci", 3) == 0))
-
-#define __virt_to_pcibus(x)     (__virt_to_phys((x) + PKUNITY_PCIAHB_BASE))
-#define __pcibus_to_virt(x)     (__phys_to_virt(x) - PKUNITY_PCIAHB_BASE)
-
-/* kuser area */
-#define KUSER_VECPAGE_BASE	(KUSER_BASE + UL(0x3fff0000))
-/* kuser_vecpage (0xbfff0000) is ro, and vectors page (0xffff0000) is rw */
-#define kuser_vecpage_to_vectors(x)	((x) - (KUSER_VECPAGE_BASE)	\
-					+ (VECTORS_BASE))
-
-#endif
diff --git a/arch/unicore32/include/mach/ocd.h b/arch/unicore32/include/mach/ocd.h
deleted file mode 100644
index 2a814929e389..000000000000
--- a/arch/unicore32/include/mach/ocd.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/mach/ocd.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-
-#ifndef __MACH_PUV3_OCD_H__
-#define __MACH_PUV3_OCD_H__
-
-#if defined(CONFIG_DEBUG_OCD)
-static inline void ocd_putc(unsigned int c)
-{
-	int status, i = 0x2000000;
-
-	do {
-		if (--i < 0)
-			return;
-
-		asm volatile ("movc %0, p1.c0, #0" : "=r" (status));
-	} while (status & 2);
-
-	asm("movc p1.c1, %0, #1" : : "r" (c));
-}
-
-#define putc(ch)	ocd_putc(ch)
-#else
-#define putc(ch)
-#endif
-
-#endif
diff --git a/arch/unicore32/include/mach/pm.h b/arch/unicore32/include/mach/pm.h
deleted file mode 100644
index cb40b8490a57..000000000000
--- a/arch/unicore32/include/mach/pm.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore/include/mach/pm.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#ifndef __PUV3_PM_H__
-#define __PUV3_PM_H__
-
-#include <linux/suspend.h>
-
-struct puv3_cpu_pm_fns {
-	int	save_count;
-	void	(*save)(unsigned long *);
-	void	(*restore)(unsigned long *);
-	int	(*valid)(suspend_state_t state);
-	void	(*enter)(suspend_state_t state);
-	int	(*prepare)(void);
-	void	(*finish)(void);
-};
-
-extern struct puv3_cpu_pm_fns *puv3_cpu_pm_fns;
-
-/* sleep.S */
-extern void puv3_cpu_suspend(unsigned int);
-
-extern void puv3_cpu_resume(void);
-
-extern int puv3_pm_enter(suspend_state_t state);
-
-/* Defined in hibernate_asm.S */
-extern int restore_image(pgd_t *resume_pg_dir, struct pbe *restore_pblist);
-
-extern struct pbe *restore_pblist;
-#endif
diff --git a/arch/unicore32/include/mach/regs-ac97.h b/arch/unicore32/include/mach/regs-ac97.h
deleted file mode 100644
index 85c601898d02..000000000000
--- a/arch/unicore32/include/mach/regs-ac97.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * PKUnity AC97 Registers
- */
-
-#define PKUNITY_AC97_CONR		(PKUNITY_AC97_BASE + 0x0000)
-#define PKUNITY_AC97_OCR		(PKUNITY_AC97_BASE + 0x0004)
-#define PKUNITY_AC97_ICR		(PKUNITY_AC97_BASE + 0x0008)
-#define PKUNITY_AC97_CRAC		(PKUNITY_AC97_BASE + 0x000C)
-#define PKUNITY_AC97_INTR		(PKUNITY_AC97_BASE + 0x0010)
-#define PKUNITY_AC97_INTRSTAT		(PKUNITY_AC97_BASE + 0x0014)
-#define PKUNITY_AC97_INTRCLEAR		(PKUNITY_AC97_BASE + 0x0018)
-#define PKUNITY_AC97_ENABLE		(PKUNITY_AC97_BASE + 0x001C)
-#define PKUNITY_AC97_OUT_FIFO		(PKUNITY_AC97_BASE + 0x0020)
-#define PKUNITY_AC97_IN_FIFO		(PKUNITY_AC97_BASE + 0x0030)
-
-#define AC97_CODEC_REG(v)               FIELD((v), 7, 16)
-#define AC97_CODEC_VAL(v)               FIELD((v), 16, 0)
-#define AC97_CODEC_WRITECOMPLETE        FIELD(1, 1, 2)
-
-/*
- * VAR PLAY SAMPLE RATE
- */
-#define AC97_CMD_VPSAMPLE		(FIELD(3, 2, 16) | FIELD(3, 2, 0))
-
-/*
- * FIX CAPTURE SAMPLE RATE
- */
-#define AC97_CMD_FCSAMPLE		FIELD(7, 3, 0)
-
-#define AC97_CMD_RESET			FIELD(1, 1, 0)
-#define AC97_CMD_ENABLE			FIELD(1, 1, 0)
-#define AC97_CMD_DISABLE		FIELD(0, 1, 0)
diff --git a/arch/unicore32/include/mach/regs-dmac.h b/arch/unicore32/include/mach/regs-dmac.h
deleted file mode 100644
index bbdc52d06a98..000000000000
--- a/arch/unicore32/include/mach/regs-dmac.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * PKUnity Direct Memory Access Controller (DMAC)
- */
-
-/*
- * Interrupt Status Reg DMAC_ISR.
- */
-#define DMAC_ISR		(PKUNITY_DMAC_BASE + 0x0020)
-/*
- * Interrupt Transfer Complete Status Reg DMAC_ITCSR.
- */
-#define DMAC_ITCSR		(PKUNITY_DMAC_BASE + 0x0050)
-/*
- * Interrupt Transfer Complete Clear Reg DMAC_ITCCR.
- */
-#define DMAC_ITCCR		(PKUNITY_DMAC_BASE + 0x0060)
-/*
- * Interrupt Error Status Reg DMAC_IESR.
- */
-#define DMAC_IESR		(PKUNITY_DMAC_BASE + 0x0080)
-/*
- * Interrupt Error Clear Reg DMAC_IECR.
- */
-#define DMAC_IECR		(PKUNITY_DMAC_BASE + 0x0090)
-/*
- * Enable Channels Reg DMAC_ENCH.
- */
-#define DMAC_ENCH		(PKUNITY_DMAC_BASE + 0x00B0)
-
-/*
- * DMA control reg. Space [byte]
- */
-#define DMASp                   0x00000100
-
-/*
- * Source Addr DMAC_SRCADDR(ch).
- */
-#define DMAC_SRCADDR(ch)	(PKUNITY_DMAC_BASE + (ch)*DMASp + 0x00)
-/*
- * Destination Addr DMAC_DESTADDR(ch).
- */
-#define DMAC_DESTADDR(ch)	(PKUNITY_DMAC_BASE + (ch)*DMASp + 0x04)
-/*
- * Control Reg DMAC_CONTROL(ch).
- */
-#define DMAC_CONTROL(ch)	(PKUNITY_DMAC_BASE + (ch)*DMASp + 0x0C)
-/*
- * Configuration Reg DMAC_CONFIG(ch).
- */
-#define DMAC_CONFIG(ch)		(PKUNITY_DMAC_BASE + (ch)*DMASp + 0x10)
-
-#define DMAC_IR_MASK            FMASK(6, 0)
-/*
- * select channel (ch)
- */
-#define DMAC_CHANNEL(ch)	FIELD(1, 1, (ch))
-
-#define DMAC_CONTROL_SIZE_BYTE(v)       (FIELD((v), 12, 14) | \
-					FIELD(0, 3, 9) | FIELD(0, 3, 6))
-#define DMAC_CONTROL_SIZE_HWORD(v)      (FIELD((v) >> 1, 12, 14) | \
-					FIELD(1, 3, 9) | FIELD(1, 3, 6))
-#define DMAC_CONTROL_SIZE_WORD(v)       (FIELD((v) >> 2, 12, 14) | \
-					FIELD(2, 3, 9) | FIELD(2, 3, 6))
-#define DMAC_CONTROL_DI                 FIELD(1, 1, 13)
-#define DMAC_CONTROL_SI                 FIELD(1, 1, 12)
-#define DMAC_CONTROL_BURST_1BYTE        (FIELD(0, 3, 3) | FIELD(0, 3, 0))
-#define DMAC_CONTROL_BURST_4BYTE        (FIELD(3, 3, 3) | FIELD(3, 3, 0))
-#define DMAC_CONTROL_BURST_8BYTE        (FIELD(5, 3, 3) | FIELD(5, 3, 0))
-#define DMAC_CONTROL_BURST_16BYTE       (FIELD(7, 3, 3) | FIELD(7, 3, 0))
-
-#define	DMAC_CONFIG_UART0_WR    (FIELD(2, 4, 11) | FIELD(1, 2, 1))
-#define	DMAC_CONFIG_UART0_RD    (FIELD(2, 4, 7)  | FIELD(2, 2, 1))
-#define	DMAC_CONFIG_UART1_WR    (FIELD(3, 4, 11) | FIELD(1, 2, 1))
-#define	DMAC_CONFIG_UART1RD     (FIELD(3, 4, 7)  | FIELD(2, 2, 1))
-#define	DMAC_CONFIG_AC97WR      (FIELD(4, 4, 11) | FIELD(1, 2, 1))
-#define	DMAC_CONFIG_AC97RD      (FIELD(4, 4, 7)  | FIELD(2, 2, 1))
-#define	DMAC_CONFIG_MMCWR       (FIELD(7, 4, 11) | FIELD(1, 2, 1))
-#define	DMAC_CONFIG_MMCRD       (FIELD(7, 4, 7)  | FIELD(2, 2, 1))
-#define DMAC_CONFIG_MASKITC     FIELD(1, 1, 4)
-#define DMAC_CONFIG_MASKIE      FIELD(1, 1, 3)
-#define DMAC_CONFIG_EN          FIELD(1, 1, 0)
diff --git a/arch/unicore32/include/mach/regs-gpio.h b/arch/unicore32/include/mach/regs-gpio.h
deleted file mode 100644
index 5fc701ee33e3..000000000000
--- a/arch/unicore32/include/mach/regs-gpio.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * PKUnity General-Purpose Input/Output (GPIO) Registers
- */
-
-/*
- * Voltage Status Reg GPIO_GPLR.
- */
-#define GPIO_GPLR	(PKUNITY_GPIO_BASE + 0x0000)
-/*
- * Pin Direction Reg GPIO_GPDR.
- */
-#define GPIO_GPDR	(PKUNITY_GPIO_BASE + 0x0004)
-/*
- * Output Pin Set Reg GPIO_GPSR.
- */
-#define GPIO_GPSR	(PKUNITY_GPIO_BASE + 0x0008)
-/*
- * Output Pin Clear Reg GPIO_GPCR.
- */
-#define GPIO_GPCR	(PKUNITY_GPIO_BASE + 0x000C)
-/*
- * Raise Edge Detect Reg GPIO_GRER.
- */
-#define GPIO_GRER	(PKUNITY_GPIO_BASE + 0x0010)
-/*
- * Fall Edge Detect Reg GPIO_GFER.
- */
-#define GPIO_GFER	(PKUNITY_GPIO_BASE + 0x0014)
-/*
- * Edge Status Reg GPIO_GEDR.
- */
-#define GPIO_GEDR	(PKUNITY_GPIO_BASE + 0x0018)
-/*
- * Special Voltage Detect Reg GPIO_GPIR.
- */
-#define GPIO_GPIR	(PKUNITY_GPIO_BASE + 0x0020)
-
-#define GPIO_MIN	(0)
-#define GPIO_MAX	(27)
-
-#define GPIO_GPIO(Nb)	(0x00000001 << (Nb))	/* GPIO [0..27] */
-#define GPIO_GPIO0	GPIO_GPIO(0)	/* GPIO  [0] */
-#define GPIO_GPIO1	GPIO_GPIO(1)	/* GPIO  [1] */
-#define GPIO_GPIO2	GPIO_GPIO(2)	/* GPIO  [2] */
-#define GPIO_GPIO3	GPIO_GPIO(3)	/* GPIO  [3] */
-#define GPIO_GPIO4	GPIO_GPIO(4)	/* GPIO  [4] */
-#define GPIO_GPIO5	GPIO_GPIO(5)	/* GPIO  [5] */
-#define GPIO_GPIO6	GPIO_GPIO(6)	/* GPIO  [6] */
-#define GPIO_GPIO7	GPIO_GPIO(7)	/* GPIO  [7] */
-#define GPIO_GPIO8	GPIO_GPIO(8)	/* GPIO  [8] */
-#define GPIO_GPIO9	GPIO_GPIO(9)	/* GPIO  [9] */
-#define GPIO_GPIO10	GPIO_GPIO(10)	/* GPIO [10] */
-#define GPIO_GPIO11	GPIO_GPIO(11)	/* GPIO [11] */
-#define GPIO_GPIO12	GPIO_GPIO(12)	/* GPIO [12] */
-#define GPIO_GPIO13	GPIO_GPIO(13)	/* GPIO [13] */
-#define GPIO_GPIO14	GPIO_GPIO(14)	/* GPIO [14] */
-#define GPIO_GPIO15	GPIO_GPIO(15)	/* GPIO [15] */
-#define GPIO_GPIO16	GPIO_GPIO(16)	/* GPIO [16] */
-#define GPIO_GPIO17	GPIO_GPIO(17)	/* GPIO [17] */
-#define GPIO_GPIO18	GPIO_GPIO(18)	/* GPIO [18] */
-#define GPIO_GPIO19	GPIO_GPIO(19)	/* GPIO [19] */
-#define GPIO_GPIO20	GPIO_GPIO(20)	/* GPIO [20] */
-#define GPIO_GPIO21	GPIO_GPIO(21)	/* GPIO [21] */
-#define GPIO_GPIO22	GPIO_GPIO(22)	/* GPIO [22] */
-#define GPIO_GPIO23	GPIO_GPIO(23)	/* GPIO [23] */
-#define GPIO_GPIO24	GPIO_GPIO(24)	/* GPIO [24] */
-#define GPIO_GPIO25	GPIO_GPIO(25)	/* GPIO [25] */
-#define GPIO_GPIO26	GPIO_GPIO(26)	/* GPIO [26] */
-#define GPIO_GPIO27	GPIO_GPIO(27)	/* GPIO [27] */
-
diff --git a/arch/unicore32/include/mach/regs-i2c.h b/arch/unicore32/include/mach/regs-i2c.h
deleted file mode 100644
index b41aa7c92430..000000000000
--- a/arch/unicore32/include/mach/regs-i2c.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * PKUnity Inter-integrated Circuit (I2C) Registers
- */
-
-/*
- * Control Reg I2C_CON.
- */
-#define I2C_CON		(PKUNITY_I2C_BASE + 0x0000)
-/*
- * Target Address Reg I2C_TAR.
- */
-#define I2C_TAR		(PKUNITY_I2C_BASE + 0x0004)
-/*
- * Data buffer and command Reg I2C_DATACMD.
- */
-#define I2C_DATACMD	(PKUNITY_I2C_BASE + 0x0010)
-/*
- * Enable Reg I2C_ENABLE.
- */
-#define I2C_ENABLE	(PKUNITY_I2C_BASE + 0x006C)
-/*
- * Status Reg I2C_STATUS.
- */
-#define I2C_STATUS	(PKUNITY_I2C_BASE + 0x0070)
-/*
- * Tx FIFO Length Reg I2C_TXFLR.
- */
-#define I2C_TXFLR	(PKUNITY_I2C_BASE + 0x0074)
-/*
- * Rx FIFO Length Reg I2C_RXFLR.
- */
-#define I2C_RXFLR	(PKUNITY_I2C_BASE + 0x0078)
-/*
- * Enable Status Reg I2C_ENSTATUS.
- */
-#define I2C_ENSTATUS	(PKUNITY_I2C_BASE + 0x009C)
-
-#define I2C_CON_MASTER          FIELD(1, 1, 0)
-#define I2C_CON_SPEED_STD       FIELD(1, 2, 1)
-#define I2C_CON_SPEED_FAST      FIELD(2, 2, 1)
-#define I2C_CON_RESTART         FIELD(1, 1, 5)
-#define I2C_CON_SLAVEDISABLE    FIELD(1, 1, 6)
-
-#define I2C_DATACMD_READ        FIELD(1, 1, 8)
-#define I2C_DATACMD_WRITE       FIELD(0, 1, 8)
-#define I2C_DATACMD_DAT_MASK    FMASK(8, 0)
-#define I2C_DATACMD_DAT(v)      FIELD((v), 8, 0)
-
-#define I2C_ENABLE_ENABLE       FIELD(1, 1, 0)
-#define I2C_ENABLE_DISABLE      FIELD(0, 1, 0)
-
-#define I2C_STATUS_RFF          FIELD(1, 1, 4)
-#define I2C_STATUS_RFNE         FIELD(1, 1, 3)
-#define I2C_STATUS_TFE          FIELD(1, 1, 2)
-#define I2C_STATUS_TFNF         FIELD(1, 1, 1)
-#define I2C_STATUS_ACTIVITY     FIELD(1, 1, 0)
-
-#define I2C_ENSTATUS_ENABLE	FIELD(1, 1, 0)
-
-#define I2C_TAR_THERMAL	0x4f
-#define I2C_TAR_SPD	0x50
-#define I2C_TAR_PWIC    0x55
-#define I2C_TAR_EEPROM	0x57
diff --git a/arch/unicore32/include/mach/regs-intc.h b/arch/unicore32/include/mach/regs-intc.h
deleted file mode 100644
index 4eb1b5b571bb..000000000000
--- a/arch/unicore32/include/mach/regs-intc.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * PKUNITY Interrupt Controller (INTC) Registers
- */
-/*
- * INTC Level Reg INTC_ICLR.
- */
-#define INTC_ICLR	(PKUNITY_INTC_BASE + 0x0000)
-/*
- * INTC Mask Reg INTC_ICMR.
- */
-#define INTC_ICMR	(PKUNITY_INTC_BASE + 0x0004)
-/*
- * INTC Pending Reg INTC_ICPR.
- */
-#define INTC_ICPR	(PKUNITY_INTC_BASE + 0x0008)
-/*
- * INTC IRQ Pending Reg INTC_ICIP.
- */
-#define INTC_ICIP	(PKUNITY_INTC_BASE + 0x000C)
-/*
- * INTC REAL Pending Reg INTC_ICFP.
- */
-#define INTC_ICFP	(PKUNITY_INTC_BASE + 0x0010)
-/*
- * INTC Control Reg INTC_ICCR.
- */
-#define INTC_ICCR	(PKUNITY_INTC_BASE + 0x0014)
-
diff --git a/arch/unicore32/include/mach/regs-nand.h b/arch/unicore32/include/mach/regs-nand.h
deleted file mode 100644
index 7f29939251ef..000000000000
--- a/arch/unicore32/include/mach/regs-nand.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * PKUnity NAND Controller Registers
- */
-/*
- * ID Reg. 0 NAND_IDR0
- */
-#define NAND_IDR0	(PKUNITY_NAND_BASE + 0x0000)
-/*
- * ID Reg. 1 NAND_IDR1
- */
-#define NAND_IDR1	(PKUNITY_NAND_BASE + 0x0004)
-/*
- * ID Reg. 2 NAND_IDR2
- */
-#define NAND_IDR2	(PKUNITY_NAND_BASE + 0x0008)
-/*
- * ID Reg. 3 NAND_IDR3
- */
-#define NAND_IDR3	(PKUNITY_NAND_BASE + 0x000C)
-/*
- * Page Address Reg 0 NAND_PAR0
- */
-#define NAND_PAR0	(PKUNITY_NAND_BASE + 0x0010)
-/*
- * Page Address Reg 1 NAND_PAR1
- */
-#define NAND_PAR1	(PKUNITY_NAND_BASE + 0x0014)
-/*
- * Page Address Reg 2 NAND_PAR2
- */
-#define NAND_PAR2	(PKUNITY_NAND_BASE + 0x0018)
-/*
- * ECC Enable Reg NAND_ECCEN
- */
-#define NAND_ECCEN	(PKUNITY_NAND_BASE + 0x001C)
-/*
- * Buffer Reg NAND_BUF
- */
-#define NAND_BUF	(PKUNITY_NAND_BASE + 0x0020)
-/*
- * ECC Status Reg NAND_ECCSR
- */
-#define NAND_ECCSR	(PKUNITY_NAND_BASE + 0x0024)
-/*
- * Command Reg NAND_CMD
- */
-#define NAND_CMD	(PKUNITY_NAND_BASE + 0x0028)
-/*
- * DMA Configure Reg NAND_DMACR
- */
-#define NAND_DMACR	(PKUNITY_NAND_BASE + 0x002C)
-/*
- * Interrupt Reg NAND_IR
- */
-#define NAND_IR		(PKUNITY_NAND_BASE + 0x0030)
-/*
- * Interrupt Mask Reg NAND_IMR
- */
-#define NAND_IMR	(PKUNITY_NAND_BASE + 0x0034)
-/*
- * Chip Enable Reg NAND_CHIPEN
- */
-#define NAND_CHIPEN	(PKUNITY_NAND_BASE + 0x0038)
-/*
- * Address Reg NAND_ADDR
- */
-#define NAND_ADDR	(PKUNITY_NAND_BASE + 0x003C)
-
-/*
- * Command bits NAND_CMD_CMD_MASK
- */
-#define NAND_CMD_CMD_MASK		FMASK(4, 4)
-#define NAND_CMD_CMD_READPAGE		FIELD(0x0, 4, 4)
-#define NAND_CMD_CMD_ERASEBLOCK		FIELD(0x6, 4, 4)
-#define NAND_CMD_CMD_READSTATUS		FIELD(0x7, 4, 4)
-#define NAND_CMD_CMD_WRITEPAGE		FIELD(0x8, 4, 4)
-#define NAND_CMD_CMD_READID		FIELD(0x9, 4, 4)
-#define NAND_CMD_CMD_RESET		FIELD(0xf, 4, 4)
-
diff --git a/arch/unicore32/include/mach/regs-ost.h b/arch/unicore32/include/mach/regs-ost.h
deleted file mode 100644
index 6c63e7b7569e..000000000000
--- a/arch/unicore32/include/mach/regs-ost.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * PKUnity Operating System Timer (OST) Registers
- */
-/*
- * Match Reg 0 OST_OSMR0
- */
-#define OST_OSMR0	(PKUNITY_OST_BASE + 0x0000)
-/*
- * Match Reg 1 OST_OSMR1
- */
-#define OST_OSMR1	(PKUNITY_OST_BASE + 0x0004)
-/*
- * Match Reg 2 OST_OSMR2
- */
-#define OST_OSMR2	(PKUNITY_OST_BASE + 0x0008)
-/*
- * Match Reg 3 OST_OSMR3
- */
-#define OST_OSMR3	(PKUNITY_OST_BASE + 0x000C)
-/*
- * Counter Reg OST_OSCR
- */
-#define OST_OSCR	(PKUNITY_OST_BASE + 0x0010)
-/*
- * Status Reg OST_OSSR
- */
-#define OST_OSSR	(PKUNITY_OST_BASE + 0x0014)
-/*
- * Watchdog Enable Reg OST_OWER
- */
-#define OST_OWER	(PKUNITY_OST_BASE + 0x0018)
-/*
- * Interrupt Enable Reg OST_OIER
- */
-#define OST_OIER	(PKUNITY_OST_BASE + 0x001C)
-
-/*
- * PWM Registers: IO base address: PKUNITY_OST_BASE + 0x80
- *      PWCR: Pulse Width Control Reg
- *      DCCR: Duty Cycle Control Reg
- *      PCR: Period Control Reg
- */
-#define OST_PWM_PWCR	(0x00)
-#define OST_PWM_DCCR	(0x04)
-#define OST_PWM_PCR 	(0x08)
-
-/*
- * Match detected 0 OST_OSSR_M0
- */
-#define OST_OSSR_M0		FIELD(1, 1, 0)
-/*
- * Match detected 1 OST_OSSR_M1
- */
-#define OST_OSSR_M1		FIELD(1, 1, 1)
-/*
- * Match detected 2 OST_OSSR_M2
- */
-#define OST_OSSR_M2		FIELD(1, 1, 2)
-/*
- * Match detected 3 OST_OSSR_M3
- */
-#define OST_OSSR_M3		FIELD(1, 1, 3)
-
-/*
- * Interrupt enable 0 OST_OIER_E0
- */
-#define OST_OIER_E0		FIELD(1, 1, 0)
-/*
- * Interrupt enable 1 OST_OIER_E1
- */
-#define OST_OIER_E1		FIELD(1, 1, 1)
-/*
- * Interrupt enable 2 OST_OIER_E2
- */
-#define OST_OIER_E2		FIELD(1, 1, 2)
-/*
- * Interrupt enable 3 OST_OIER_E3
- */
-#define OST_OIER_E3		FIELD(1, 1, 3)
-
-/*
- * Watchdog Match Enable OST_OWER_WME
- */
-#define OST_OWER_WME		FIELD(1, 1, 0)
-
-/*
- * PWM Full Duty Cycle OST_PWMDCCR_FDCYCLE
- */
-#define OST_PWMDCCR_FDCYCLE	FIELD(1, 1, 10)
-
diff --git a/arch/unicore32/include/mach/regs-pci.h b/arch/unicore32/include/mach/regs-pci.h
deleted file mode 100644
index 25bb307b87c3..000000000000
--- a/arch/unicore32/include/mach/regs-pci.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * PKUnity AHB-PCI Bridge Registers
- */
-
-/*
- * AHB/PCI fixed physical address for pci addess configuration
- */
-/*
- * PCICFG Bridge Base Reg.
- */
-#define PCICFG_BRIBASE          (PKUNITY_PCICFG_BASE + 0x0000)
-/*
- * PCICFG Address Reg.
- */
-#define PCICFG_ADDR             (PKUNITY_PCICFG_BASE + 0x0004)
-/*
- * PCICFG Address Reg.
- */
-#define PCICFG_DATA             (PKUNITY_PCICFG_BASE + 0x0008)
-
-/*
- * PCI Bridge configuration space
- */
-#define PCIBRI_ID		(PKUNITY_PCIBRI_BASE + 0x0000)
-#define PCIBRI_CMD		(PKUNITY_PCIBRI_BASE + 0x0004)
-#define PCIBRI_CLASS		(PKUNITY_PCIBRI_BASE + 0x0008)
-#define PCIBRI_LTR		(PKUNITY_PCIBRI_BASE + 0x000C)
-#define PCIBRI_BAR0		(PKUNITY_PCIBRI_BASE + 0x0010)
-#define PCIBRI_BAR1		(PKUNITY_PCIBRI_BASE + 0x0014)
-#define PCIBRI_BAR2		(PKUNITY_PCIBRI_BASE + 0x0018)
-#define PCIBRI_BAR3		(PKUNITY_PCIBRI_BASE + 0x001C)
-#define PCIBRI_BAR4		(PKUNITY_PCIBRI_BASE + 0x0020)
-#define PCIBRI_BAR5		(PKUNITY_PCIBRI_BASE + 0x0024)
-
-#define PCIBRI_PCICTL0		(PKUNITY_PCIBRI_BASE + 0x0100)
-#define PCIBRI_PCIBAR0		(PKUNITY_PCIBRI_BASE + 0x0104)
-#define PCIBRI_PCIAMR0		(PKUNITY_PCIBRI_BASE + 0x0108)
-#define PCIBRI_PCITAR0		(PKUNITY_PCIBRI_BASE + 0x010C)
-#define PCIBRI_PCICTL1		(PKUNITY_PCIBRI_BASE + 0x0110)
-#define PCIBRI_PCIBAR1		(PKUNITY_PCIBRI_BASE + 0x0114)
-#define PCIBRI_PCIAMR1		(PKUNITY_PCIBRI_BASE + 0x0118)
-#define PCIBRI_PCITAR1		(PKUNITY_PCIBRI_BASE + 0x011C)
-#define PCIBRI_PCICTL2		(PKUNITY_PCIBRI_BASE + 0x0120)
-#define PCIBRI_PCIBAR2		(PKUNITY_PCIBRI_BASE + 0x0124)
-#define PCIBRI_PCIAMR2		(PKUNITY_PCIBRI_BASE + 0x0128)
-#define PCIBRI_PCITAR2		(PKUNITY_PCIBRI_BASE + 0x012C)
-#define PCIBRI_PCICTL3		(PKUNITY_PCIBRI_BASE + 0x0130)
-#define PCIBRI_PCIBAR3		(PKUNITY_PCIBRI_BASE + 0x0134)
-#define PCIBRI_PCIAMR3		(PKUNITY_PCIBRI_BASE + 0x0138)
-#define PCIBRI_PCITAR3		(PKUNITY_PCIBRI_BASE + 0x013C)
-#define PCIBRI_PCICTL4		(PKUNITY_PCIBRI_BASE + 0x0140)
-#define PCIBRI_PCIBAR4		(PKUNITY_PCIBRI_BASE + 0x0144)
-#define PCIBRI_PCIAMR4		(PKUNITY_PCIBRI_BASE + 0x0148)
-#define PCIBRI_PCITAR4		(PKUNITY_PCIBRI_BASE + 0x014C)
-#define PCIBRI_PCICTL5		(PKUNITY_PCIBRI_BASE + 0x0150)
-#define PCIBRI_PCIBAR5		(PKUNITY_PCIBRI_BASE + 0x0154)
-#define PCIBRI_PCIAMR5		(PKUNITY_PCIBRI_BASE + 0x0158)
-#define PCIBRI_PCITAR5		(PKUNITY_PCIBRI_BASE + 0x015C)
-
-#define PCIBRI_AHBCTL0		(PKUNITY_PCIBRI_BASE + 0x0180)
-#define PCIBRI_AHBBAR0		(PKUNITY_PCIBRI_BASE + 0x0184)
-#define PCIBRI_AHBAMR0		(PKUNITY_PCIBRI_BASE + 0x0188)
-#define PCIBRI_AHBTAR0		(PKUNITY_PCIBRI_BASE + 0x018C)
-#define PCIBRI_AHBCTL1		(PKUNITY_PCIBRI_BASE + 0x0190)
-#define PCIBRI_AHBBAR1		(PKUNITY_PCIBRI_BASE + 0x0194)
-#define PCIBRI_AHBAMR1		(PKUNITY_PCIBRI_BASE + 0x0198)
-#define PCIBRI_AHBTAR1		(PKUNITY_PCIBRI_BASE + 0x019C)
-#define PCIBRI_AHBCTL2		(PKUNITY_PCIBRI_BASE + 0x01A0)
-#define PCIBRI_AHBBAR2		(PKUNITY_PCIBRI_BASE + 0x01A4)
-#define PCIBRI_AHBAMR2		(PKUNITY_PCIBRI_BASE + 0x01A8)
-#define PCIBRI_AHBTAR2		(PKUNITY_PCIBRI_BASE + 0x01AC)
-#define PCIBRI_AHBCTL3		(PKUNITY_PCIBRI_BASE + 0x01B0)
-#define PCIBRI_AHBBAR3		(PKUNITY_PCIBRI_BASE + 0x01B4)
-#define PCIBRI_AHBAMR3		(PKUNITY_PCIBRI_BASE + 0x01B8)
-#define PCIBRI_AHBTAR3		(PKUNITY_PCIBRI_BASE + 0x01BC)
-#define PCIBRI_AHBCTL4		(PKUNITY_PCIBRI_BASE + 0x01C0)
-#define PCIBRI_AHBBAR4		(PKUNITY_PCIBRI_BASE + 0x01C4)
-#define PCIBRI_AHBAMR4		(PKUNITY_PCIBRI_BASE + 0x01C8)
-#define PCIBRI_AHBTAR4		(PKUNITY_PCIBRI_BASE + 0x01CC)
-#define PCIBRI_AHBCTL5		(PKUNITY_PCIBRI_BASE + 0x01D0)
-#define PCIBRI_AHBBAR5		(PKUNITY_PCIBRI_BASE + 0x01D4)
-#define PCIBRI_AHBAMR5		(PKUNITY_PCIBRI_BASE + 0x01D8)
-#define PCIBRI_AHBTAR5		(PKUNITY_PCIBRI_BASE + 0x01DC)
-
-#define PCIBRI_CTLx_AT          FIELD(1, 1, 2)
-#define PCIBRI_CTLx_PREF        FIELD(1, 1, 1)
-#define PCIBRI_CTLx_MRL         FIELD(1, 1, 0)
-
-#define PCIBRI_BARx_ADDR        FIELD(0xFFFFFFFC, 30, 2)
-#define PCIBRI_BARx_IO          FIELD(1, 1, 0)
-#define PCIBRI_BARx_MEM         FIELD(0, 1, 0)
-
-#define PCIBRI_CMD_IO           FIELD(1, 1, 0)
-#define PCIBRI_CMD_MEM          FIELD(1, 1, 1)
diff --git a/arch/unicore32/include/mach/regs-pm.h b/arch/unicore32/include/mach/regs-pm.h
deleted file mode 100644
index 777b1ace39b9..000000000000
--- a/arch/unicore32/include/mach/regs-pm.h
+++ /dev/null
@@ -1,127 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * PKUNITY Power Manager (PM) Registers
- */
-/*
- * PM Control Reg PM_PMCR
- */
-#define PM_PMCR                 (PKUNITY_PM_BASE + 0x0000)
-/*
- * PM General Conf. Reg PM_PGCR
- */
-#define PM_PGCR                 (PKUNITY_PM_BASE + 0x0004)
-/*
- * PM PLL Conf. Reg PM_PPCR
- */
-#define PM_PPCR                 (PKUNITY_PM_BASE + 0x0008)
-/*
- * PM Wakeup Enable Reg PM_PWER
- */
-#define PM_PWER                 (PKUNITY_PM_BASE + 0x000C)
-/*
- * PM GPIO Sleep Status Reg PM_PGSR
- */
-#define PM_PGSR                 (PKUNITY_PM_BASE + 0x0010)
-/*
- * PM Clock Gate Reg PM_PCGR
- */
-#define PM_PCGR                 (PKUNITY_PM_BASE + 0x0014)
-/*
- * PM SYS PLL Conf. Reg PM_PLLSYSCFG
- */
-#define PM_PLLSYSCFG            (PKUNITY_PM_BASE + 0x0018)
-/*
- * PM DDR PLL Conf. Reg PM_PLLDDRCFG
- */
-#define PM_PLLDDRCFG            (PKUNITY_PM_BASE + 0x001C)
-/*
- * PM VGA PLL Conf. Reg PM_PLLVGACFG
- */
-#define PM_PLLVGACFG            (PKUNITY_PM_BASE + 0x0020)
-/*
- * PM Div Conf. Reg PM_DIVCFG
- */
-#define PM_DIVCFG               (PKUNITY_PM_BASE + 0x0024)
-/*
- * PM SYS PLL Status Reg PM_PLLSYSSTATUS
- */
-#define PM_PLLSYSSTATUS         (PKUNITY_PM_BASE + 0x0028)
-/*
- * PM DDR PLL Status Reg PM_PLLDDRSTATUS
- */
-#define PM_PLLDDRSTATUS         (PKUNITY_PM_BASE + 0x002C)
-/*
- * PM VGA PLL Status Reg PM_PLLVGASTATUS
- */
-#define PM_PLLVGASTATUS         (PKUNITY_PM_BASE + 0x0030)
-/*
- * PM Div Status Reg PM_DIVSTATUS
- */
-#define PM_DIVSTATUS            (PKUNITY_PM_BASE + 0x0034)
-/*
- * PM Software Reset Reg PM_SWRESET
- */
-#define PM_SWRESET              (PKUNITY_PM_BASE + 0x0038)
-/*
- * PM DDR2 PAD Start Reg PM_DDR2START
- */
-#define PM_DDR2START            (PKUNITY_PM_BASE + 0x003C)
-/*
- * PM DDR2 PAD Status Reg PM_DDR2CAL0
- */
-#define PM_DDR2CAL0             (PKUNITY_PM_BASE + 0x0040)
-/*
- * PM PLL DFC Done Reg PM_PLLDFCDONE
- */
-#define PM_PLLDFCDONE           (PKUNITY_PM_BASE + 0x0044)
-
-#define PM_PMCR_SFB             FIELD(1, 1, 0)
-#define PM_PMCR_IFB             FIELD(1, 1, 1)
-#define PM_PMCR_CFBSYS          FIELD(1, 1, 2)
-#define PM_PMCR_CFBDDR          FIELD(1, 1, 3)
-#define PM_PMCR_CFBVGA          FIELD(1, 1, 4)
-#define PM_PMCR_CFBDIVBCLK      FIELD(1, 1, 5)
-
-/*
- * GPIO 8~27 wake-up enable PM_PWER_GPIOHIGH
- */
-#define PM_PWER_GPIOHIGH        FIELD(1, 1, 8)
-/*
- * RTC alarm wake-up enable PM_PWER_RTC
- */
-#define PM_PWER_RTC             FIELD(1, 1, 31)
-
-#define PM_PCGR_BCLK64DDR	FIELD(1, 1, 0)
-#define PM_PCGR_BCLK64VGA	FIELD(1, 1, 1)
-#define PM_PCGR_BCLKDDR		FIELD(1, 1, 2)
-#define PM_PCGR_BCLKPCI		FIELD(1, 1, 4)
-#define PM_PCGR_BCLKDMAC	FIELD(1, 1, 5)
-#define PM_PCGR_BCLKUMAL	FIELD(1, 1, 6)
-#define PM_PCGR_BCLKUSB		FIELD(1, 1, 7)
-#define PM_PCGR_BCLKMME		FIELD(1, 1, 10)
-#define PM_PCGR_BCLKNAND	FIELD(1, 1, 11)
-#define PM_PCGR_BCLKH264E	FIELD(1, 1, 12)
-#define PM_PCGR_BCLKVGA		FIELD(1, 1, 13)
-#define PM_PCGR_BCLKH264D	FIELD(1, 1, 14)
-#define PM_PCGR_VECLK		FIELD(1, 1, 15)
-#define PM_PCGR_HECLK		FIELD(1, 1, 16)
-#define PM_PCGR_HDCLK		FIELD(1, 1, 17)
-#define PM_PCGR_NANDCLK		FIELD(1, 1, 18)
-#define PM_PCGR_GECLK		FIELD(1, 1, 19)
-#define PM_PCGR_VGACLK          FIELD(1, 1, 20)
-#define PM_PCGR_PCICLK		FIELD(1, 1, 21)
-#define PM_PCGR_SATACLK		FIELD(1, 1, 25)
-
-/*
- * [23:20]PM_DIVCFG_VGACLK(v)
- */
-#define PM_DIVCFG_VGACLK_MASK   FMASK(4, 20)
-#define PM_DIVCFG_VGACLK(v)	FIELD((v), 4, 20)
-
-#define PM_SWRESET_USB          FIELD(1, 1, 6)
-#define PM_SWRESET_VGADIV       FIELD(1, 1, 26)
-#define PM_SWRESET_GEDIV        FIELD(1, 1, 27)
-
-#define PM_PLLDFCDONE_SYSDFC    FIELD(1, 1, 0)
-#define PM_PLLDFCDONE_DDRDFC    FIELD(1, 1, 1)
-#define PM_PLLDFCDONE_VGADFC    FIELD(1, 1, 2)
diff --git a/arch/unicore32/include/mach/regs-ps2.h b/arch/unicore32/include/mach/regs-ps2.h
deleted file mode 100644
index d539d7482462..000000000000
--- a/arch/unicore32/include/mach/regs-ps2.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * PKUnity PS2 Controller Registers
- */
-/*
- * the same as I8042_DATA_REG PS2_DATA
- */
-#define PS2_DATA	(PKUNITY_PS2_BASE + 0x0060)
-/*
- * the same as I8042_COMMAND_REG PS2_COMMAND
- */
-#define PS2_COMMAND	(PKUNITY_PS2_BASE + 0x0064)
-/*
- * the same as I8042_STATUS_REG PS2_STATUS
- */
-#define PS2_STATUS	(PKUNITY_PS2_BASE + 0x0064)
-/*
- * counter reg PS2_CNT
- */
-#define PS2_CNT		(PKUNITY_PS2_BASE + 0x0068)
-
diff --git a/arch/unicore32/include/mach/regs-resetc.h b/arch/unicore32/include/mach/regs-resetc.h
deleted file mode 100644
index 5f2b9d77a9ec..000000000000
--- a/arch/unicore32/include/mach/regs-resetc.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * PKUnity Reset Controller (RC) Registers
- */
-/*
- * Software Reset Register
- */
-#define RESETC_SWRR	(PKUNITY_RESETC_BASE + 0x0000)
-/*
- * Reset Status Register
- */
-#define RESETC_RSSR	(PKUNITY_RESETC_BASE + 0x0004)
-
-/*
- * Software Reset Bit
- */
-#define RESETC_SWRR_SRB		FIELD(1, 1, 0)
-
-/*
- * Hardware Reset
- */
-#define RESETC_RSSR_HWR		FIELD(1, 1, 0)
-/*
- * Software Reset
- */
-#define RESETC_RSSR_SWR		FIELD(1, 1, 1)
-/*
- * Watchdog Reset
- */
-#define RESETC_RSSR_WDR		FIELD(1, 1, 2)
-/*
- * Sleep Mode Reset
- */
-#define RESETC_RSSR_SMR		FIELD(1, 1, 3)
-
diff --git a/arch/unicore32/include/mach/regs-rtc.h b/arch/unicore32/include/mach/regs-rtc.h
deleted file mode 100644
index f2f7f47eb65e..000000000000
--- a/arch/unicore32/include/mach/regs-rtc.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * PKUnity Real-Time Clock (RTC) control registers
- */
-/*
- * RTC Alarm Reg RTC_RTAR
- */
-#define RTC_RTAR	(PKUNITY_RTC_BASE + 0x0000)
-/*
- * RTC Count Reg RTC_RCNR
- */
-#define RTC_RCNR	(PKUNITY_RTC_BASE + 0x0004)
-/*
- * RTC Trim Reg RTC_RTTR
- */
-#define RTC_RTTR	(PKUNITY_RTC_BASE + 0x0008)
-/*
- * RTC Status Reg RTC_RTSR
- */
-#define RTC_RTSR	(PKUNITY_RTC_BASE + 0x0010)
-
-/*
- * ALarm detected RTC_RTSR_AL
- */
-#define RTC_RTSR_AL		FIELD(1, 1, 0)
-/*
- * 1 Hz clock detected RTC_RTSR_HZ
- */
-#define RTC_RTSR_HZ		FIELD(1, 1, 1)
-/*
- * ALarm interrupt Enable RTC_RTSR_ALE
- */
-#define RTC_RTSR_ALE		FIELD(1, 1, 2)
-/*
- * 1 Hz clock interrupt Enable RTC_RTSR_HZE
- */
-#define RTC_RTSR_HZE		FIELD(1, 1, 3)
-
diff --git a/arch/unicore32/include/mach/regs-sdc.h b/arch/unicore32/include/mach/regs-sdc.h
deleted file mode 100644
index 658bfaf4cb3c..000000000000
--- a/arch/unicore32/include/mach/regs-sdc.h
+++ /dev/null
@@ -1,157 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * PKUnity Multi-Media Card and Security Digital Card (MMC/SD) Registers
- */
-/*
- * Clock Control Reg SDC_CCR
- */
-#define SDC_CCR		(PKUNITY_SDC_BASE + 0x0000)
-/*
- * Software Reset Reg SDC_SRR
- */
-#define SDC_SRR		(PKUNITY_SDC_BASE + 0x0004)
-/*
- * Argument Reg SDC_ARGUMENT
- */
-#define SDC_ARGUMENT	(PKUNITY_SDC_BASE + 0x0008)
-/*
- * Command Reg SDC_COMMAND
- */
-#define SDC_COMMAND	(PKUNITY_SDC_BASE + 0x000C)
-/*
- * Block Size Reg SDC_BLOCKSIZE
- */
-#define SDC_BLOCKSIZE	(PKUNITY_SDC_BASE + 0x0010)
-/*
- * Block Cound Reg SDC_BLOCKCOUNT
- */
-#define SDC_BLOCKCOUNT	(PKUNITY_SDC_BASE + 0x0014)
-/*
- * Transfer Mode Reg SDC_TMR
- */
-#define SDC_TMR		(PKUNITY_SDC_BASE + 0x0018)
-/*
- * Response Reg. 0 SDC_RES0
- */
-#define SDC_RES0	(PKUNITY_SDC_BASE + 0x001C)
-/*
- * Response Reg. 1 SDC_RES1
- */
-#define SDC_RES1	(PKUNITY_SDC_BASE + 0x0020)
-/*
- * Response Reg. 2 SDC_RES2
- */
-#define SDC_RES2	(PKUNITY_SDC_BASE + 0x0024)
-/*
- * Response Reg. 3 SDC_RES3
- */
-#define SDC_RES3	(PKUNITY_SDC_BASE + 0x0028)
-/*
- * Read Timeout Control Reg SDC_RTCR
- */
-#define SDC_RTCR	(PKUNITY_SDC_BASE + 0x002C)
-/*
- * Interrupt Status Reg SDC_ISR
- */
-#define SDC_ISR		(PKUNITY_SDC_BASE + 0x0030)
-/*
- * Interrupt Status Mask Reg SDC_ISMR
- */
-#define SDC_ISMR	(PKUNITY_SDC_BASE + 0x0034)
-/*
- * RX FIFO SDC_RXFIFO
- */
-#define SDC_RXFIFO	(PKUNITY_SDC_BASE + 0x0038)
-/*
- * TX FIFO SDC_TXFIFO
- */
-#define SDC_TXFIFO	(PKUNITY_SDC_BASE + 0x003C)
-
-/*
- * SD Clock Enable SDC_CCR_CLKEN
- */
-#define SDC_CCR_CLKEN			FIELD(1, 1, 2)
-/*
- * [15:8] SDC_CCR_PDIV(v)
- */
-#define SDC_CCR_PDIV(v)			FIELD((v), 8, 8)
-
-/*
- * Software reset enable SDC_SRR_ENABLE
- */
-#define SDC_SRR_ENABLE			FIELD(0, 1, 0)
-/*
- * Software reset disable SDC_SRR_DISABLE
- */
-#define SDC_SRR_DISABLE			FIELD(1, 1, 0)
-
-/*
- * Response type SDC_COMMAND_RESTYPE_MASK
- */
-#define SDC_COMMAND_RESTYPE_MASK	FMASK(2, 0)
-/*
- * No response SDC_COMMAND_RESTYPE_NONE
- */
-#define SDC_COMMAND_RESTYPE_NONE	FIELD(0, 2, 0)
-/*
- * 136-bit long response SDC_COMMAND_RESTYPE_LONG
- */
-#define SDC_COMMAND_RESTYPE_LONG	FIELD(1, 2, 0)
-/*
- * 48-bit short response SDC_COMMAND_RESTYPE_SHORT
- */
-#define SDC_COMMAND_RESTYPE_SHORT	FIELD(2, 2, 0)
-/*
- * 48-bit short and test if busy response SDC_COMMAND_RESTYPE_SHORTBUSY
- */
-#define SDC_COMMAND_RESTYPE_SHORTBUSY	FIELD(3, 2, 0)
-/*
- * data ready SDC_COMMAND_DATAREADY
- */
-#define SDC_COMMAND_DATAREADY		FIELD(1, 1, 2)
-#define SDC_COMMAND_CMDEN		FIELD(1, 1, 3)
-/*
- * [10:5] SDC_COMMAND_CMDINDEX(v)
- */
-#define SDC_COMMAND_CMDINDEX(v)		FIELD((v), 6, 5)
-
-/*
- * [10:0] SDC_BLOCKSIZE_BSMASK(v)
- */
-#define SDC_BLOCKSIZE_BSMASK(v)		FIELD((v), 11, 0)
-/*
- * [11:0] SDC_BLOCKCOUNT_BCMASK(v)
- */
-#define SDC_BLOCKCOUNT_BCMASK(v)	FIELD((v), 12, 0)
-
-/*
- * Data Width 1bit SDC_TMR_WTH_1BIT
- */
-#define SDC_TMR_WTH_1BIT		FIELD(0, 1, 0)
-/*
- * Data Width 4bit SDC_TMR_WTH_4BIT
- */
-#define SDC_TMR_WTH_4BIT		FIELD(1, 1, 0)
-/*
- * Read SDC_TMR_DIR_READ
- */
-#define SDC_TMR_DIR_READ		FIELD(0, 1, 1)
-/*
- * Write SDC_TMR_DIR_WRITE
- */
-#define SDC_TMR_DIR_WRITE		FIELD(1, 1, 1)
-
-#define SDC_IR_MASK			FMASK(13, 0)
-#define SDC_IR_RESTIMEOUT		FIELD(1, 1, 0)
-#define SDC_IR_WRITECRC			FIELD(1, 1, 1)
-#define SDC_IR_READCRC			FIELD(1, 1, 2)
-#define SDC_IR_TXFIFOREAD		FIELD(1, 1, 3)
-#define SDC_IR_RXFIFOWRITE		FIELD(1, 1, 4)
-#define SDC_IR_READTIMEOUT		FIELD(1, 1, 5)
-#define SDC_IR_DATACOMPLETE		FIELD(1, 1, 6)
-#define SDC_IR_CMDCOMPLETE		FIELD(1, 1, 7)
-#define SDC_IR_RXFIFOFULL		FIELD(1, 1, 8)
-#define SDC_IR_RXFIFOEMPTY		FIELD(1, 1, 9)
-#define SDC_IR_TXFIFOFULL		FIELD(1, 1, 10)
-#define SDC_IR_TXFIFOEMPTY		FIELD(1, 1, 11)
-#define SDC_IR_ENDCMDWITHRES		FIELD(1, 1, 12)
diff --git a/arch/unicore32/include/mach/regs-spi.h b/arch/unicore32/include/mach/regs-spi.h
deleted file mode 100644
index 3460647a9c2a..000000000000
--- a/arch/unicore32/include/mach/regs-spi.h
+++ /dev/null
@@ -1,99 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * PKUnity Serial Peripheral Interface (SPI) Registers
- */
-/*
- * Control reg. 0 SPI_CR0
- */
-#define SPI_CR0		(PKUNITY_SPI_BASE + 0x0000)
-/*
- * Control reg. 1 SPI_CR1
- */
-#define SPI_CR1		(PKUNITY_SPI_BASE + 0x0004)
-/*
- * Enable reg SPI_SSIENR
- */
-#define SPI_SSIENR	(PKUNITY_SPI_BASE + 0x0008)
-/*
- * Status reg SPI_SR
- */
-#define SPI_SR		(PKUNITY_SPI_BASE + 0x0028)
-/*
- * Interrupt Mask reg SPI_IMR
- */
-#define SPI_IMR		(PKUNITY_SPI_BASE + 0x002C)
-/*
- * Interrupt Status reg SPI_ISR
- */
-#define SPI_ISR		(PKUNITY_SPI_BASE + 0x0030)
-
-/*
- * Enable SPI Controller SPI_SSIENR_EN
- */
-#define SPI_SSIENR_EN		FIELD(1, 1, 0)
-
-/*
- * SPI Busy SPI_SR_BUSY
- */
-#define SPI_SR_BUSY		FIELD(1, 1, 0)
-/*
- * Transmit FIFO Not Full SPI_SR_TFNF
- */
-#define SPI_SR_TFNF		FIELD(1, 1, 1)
-/*
- * Transmit FIFO Empty SPI_SR_TFE
- */
-#define SPI_SR_TFE		FIELD(1, 1, 2)
-/*
- * Receive FIFO Not Empty SPI_SR_RFNE
- */
-#define SPI_SR_RFNE		FIELD(1, 1, 3)
-/*
- * Receive FIFO Full SPI_SR_RFF
- */
-#define SPI_SR_RFF		FIELD(1, 1, 4)
-
-/*
- * Trans. FIFO Empty Interrupt Status SPI_ISR_TXEIS
- */
-#define SPI_ISR_TXEIS		FIELD(1, 1, 0)
-/*
- * Trans. FIFO Overflow Interrupt Status SPI_ISR_TXOIS
- */
-#define SPI_ISR_TXOIS		FIELD(1, 1, 1)
-/*
- * Receiv. FIFO Underflow Interrupt Status SPI_ISR_RXUIS
- */
-#define SPI_ISR_RXUIS		FIELD(1, 1, 2)
-/*
- * Receiv. FIFO Overflow Interrupt Status SPI_ISR_RXOIS
- */
-#define SPI_ISR_RXOIS		FIELD(1, 1, 3)
-/*
- * Receiv. FIFO Full Interrupt Status SPI_ISR_RXFIS
- */
-#define SPI_ISR_RXFIS		FIELD(1, 1, 4)
-#define SPI_ISR_MSTIS		FIELD(1, 1, 5)
-
-/*
- * Trans. FIFO Empty Interrupt Mask SPI_IMR_TXEIM
- */
-#define SPI_IMR_TXEIM		FIELD(1, 1, 0)
-/*
- * Trans. FIFO Overflow Interrupt Mask SPI_IMR_TXOIM
- */
-#define SPI_IMR_TXOIM		FIELD(1, 1, 1)
-/*
- * Receiv. FIFO Underflow Interrupt Mask SPI_IMR_RXUIM
- */
-#define SPI_IMR_RXUIM		FIELD(1, 1, 2)
-/*
- * Receiv. FIFO Overflow Interrupt Mask SPI_IMR_RXOIM
- */
-#define SPI_IMR_RXOIM		FIELD(1, 1, 3)
-/*
- * Receiv. FIFO Full Interrupt Mask SPI_IMR_RXFIM
- */
-#define SPI_IMR_RXFIM		FIELD(1, 1, 4)
-#define SPI_IMR_MSTIM		FIELD(1, 1, 5)
-
diff --git a/arch/unicore32/include/mach/regs-uart.h b/arch/unicore32/include/mach/regs-uart.h
deleted file mode 100644
index 9fa6b1938b77..000000000000
--- a/arch/unicore32/include/mach/regs-uart.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/*
- * PKUnity Universal Asynchronous Receiver/Transmitter (UART) Registers
- */
diff --git a/arch/unicore32/include/mach/regs-umal.h b/arch/unicore32/include/mach/regs-umal.h
deleted file mode 100644
index 7023089c61c6..000000000000
--- a/arch/unicore32/include/mach/regs-umal.h
+++ /dev/null
@@ -1,230 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * PKUnity Ultra Media Access Layer (UMAL) Ethernet MAC Registers
- */
-
-/* MAC module of UMAL */
-/* UMAL's MAC module includes G/MII interface, several additional PHY
- * interfaces, and MAC control sub-layer, which provides support for control
- * frames (e.g. PAUSE frames).
- */
-/*
- * TX/RX reset and control UMAL_CFG1
- */
-#define UMAL_CFG1		(PKUNITY_UMAL_BASE + 0x0000)
-/*
- * MAC interface mode control UMAL_CFG2
- */
-#define UMAL_CFG2		(PKUNITY_UMAL_BASE + 0x0004)
-/*
- * Inter Packet/Frame Gap UMAL_IPGIFG
- */
-#define UMAL_IPGIFG		(PKUNITY_UMAL_BASE + 0x0008)
-/*
- * Collision retry or backoff UMAL_HALFDUPLEX
- */
-#define UMAL_HALFDUPLEX		(PKUNITY_UMAL_BASE + 0x000c)
-/*
- * Maximum Frame Length UMAL_MAXFRAME
- */
-#define UMAL_MAXFRAME		(PKUNITY_UMAL_BASE + 0x0010)
-/*
- * Test Regsiter UMAL_TESTREG
- */
-#define UMAL_TESTREG		(PKUNITY_UMAL_BASE + 0x001c)
-/*
- * MII Management Configure UMAL_MIICFG
- */
-#define UMAL_MIICFG		(PKUNITY_UMAL_BASE + 0x0020)
-/*
- * MII Management Command UMAL_MIICMD
- */
-#define UMAL_MIICMD		(PKUNITY_UMAL_BASE + 0x0024)
-/*
- * MII Management Address UMAL_MIIADDR
- */
-#define UMAL_MIIADDR		(PKUNITY_UMAL_BASE + 0x0028)
-/*
- * MII Management Control UMAL_MIICTRL
- */
-#define UMAL_MIICTRL		(PKUNITY_UMAL_BASE + 0x002c)
-/*
- * MII Management Status UMAL_MIISTATUS
- */
-#define UMAL_MIISTATUS		(PKUNITY_UMAL_BASE + 0x0030)
-/*
- * MII Management Indicator UMAL_MIIIDCT
- */
-#define UMAL_MIIIDCT		(PKUNITY_UMAL_BASE + 0x0034)
-/*
- * Interface Control UMAL_IFCTRL
- */
-#define UMAL_IFCTRL		(PKUNITY_UMAL_BASE + 0x0038)
-/*
- * Interface Status UMAL_IFSTATUS
- */
-#define UMAL_IFSTATUS		(PKUNITY_UMAL_BASE + 0x003c)
-/*
- * MAC address (high 4 bytes) UMAL_STADDR1
- */
-#define UMAL_STADDR1		(PKUNITY_UMAL_BASE + 0x0040)
-/*
- * MAC address (low 2 bytes) UMAL_STADDR2
- */
-#define UMAL_STADDR2		(PKUNITY_UMAL_BASE + 0x0044)
-
-/* FIFO MODULE OF UMAL */
-/* UMAL's FIFO module provides data queuing for increased system level
- * throughput
- */
-#define UMAL_FIFOCFG0		(PKUNITY_UMAL_BASE + 0x0048)
-#define UMAL_FIFOCFG1		(PKUNITY_UMAL_BASE + 0x004c)
-#define UMAL_FIFOCFG2		(PKUNITY_UMAL_BASE + 0x0050)
-#define UMAL_FIFOCFG3		(PKUNITY_UMAL_BASE + 0x0054)
-#define UMAL_FIFOCFG4		(PKUNITY_UMAL_BASE + 0x0058)
-#define UMAL_FIFOCFG5		(PKUNITY_UMAL_BASE + 0x005c)
-#define UMAL_FIFORAM0		(PKUNITY_UMAL_BASE + 0x0060)
-#define UMAL_FIFORAM1		(PKUNITY_UMAL_BASE + 0x0064)
-#define UMAL_FIFORAM2		(PKUNITY_UMAL_BASE + 0x0068)
-#define UMAL_FIFORAM3		(PKUNITY_UMAL_BASE + 0x006c)
-#define UMAL_FIFORAM4		(PKUNITY_UMAL_BASE + 0x0070)
-#define UMAL_FIFORAM5		(PKUNITY_UMAL_BASE + 0x0074)
-#define UMAL_FIFORAM6		(PKUNITY_UMAL_BASE + 0x0078)
-#define UMAL_FIFORAM7		(PKUNITY_UMAL_BASE + 0x007c)
-
-/* MAHBE MODULE OF UMAL */
-/* UMAL's MAHBE module interfaces to the host system through 32-bit AHB Master
- * and Slave ports.Registers within the M-AHBE provide Control and Status
- * information concerning these transfers.
- */
-/*
- * Transmit Control UMAL_DMATxCtrl
- */
-#define UMAL_DMATxCtrl		(PKUNITY_UMAL_BASE + 0x0180)
-/*
- * Pointer to TX Descripter UMAL_DMATxDescriptor
- */
-#define UMAL_DMATxDescriptor	(PKUNITY_UMAL_BASE + 0x0184)
-/*
- * Status of Tx Packet Transfers UMAL_DMATxStatus
- */
-#define UMAL_DMATxStatus	(PKUNITY_UMAL_BASE + 0x0188)
-/*
- * Receive Control UMAL_DMARxCtrl
- */
-#define UMAL_DMARxCtrl		(PKUNITY_UMAL_BASE + 0x018c)
-/*
- * Pointer to Rx Descriptor UMAL_DMARxDescriptor
- */
-#define UMAL_DMARxDescriptor	(PKUNITY_UMAL_BASE + 0x0190)
-/*
- * Status of Rx Packet Transfers UMAL_DMARxStatus
- */
-#define UMAL_DMARxStatus	(PKUNITY_UMAL_BASE + 0x0194)
-/*
- * Interrupt Mask UMAL_DMAIntrMask
- */
-#define UMAL_DMAIntrMask	(PKUNITY_UMAL_BASE + 0x0198)
-/*
- * Interrupts, read only UMAL_DMAInterrupt
- */
-#define UMAL_DMAInterrupt	(PKUNITY_UMAL_BASE + 0x019c)
-
-/*
- * Commands for UMAL_CFG1 register
- */
-#define UMAL_CFG1_TXENABLE	FIELD(1, 1, 0)
-#define UMAL_CFG1_RXENABLE	FIELD(1, 1, 2)
-#define UMAL_CFG1_TXFLOWCTL	FIELD(1, 1, 4)
-#define UMAL_CFG1_RXFLOWCTL	FIELD(1, 1, 5)
-#define UMAL_CFG1_CONFLPBK	FIELD(1, 1, 8)
-#define UMAL_CFG1_RESET		FIELD(1, 1, 31)
-#define UMAL_CFG1_CONFFLCTL	(MAC_TX_FLOW_CTL | MAC_RX_FLOW_CTL)
-
-/*
- * Commands for UMAL_CFG2 register
- */
-#define UMAL_CFG2_FULLDUPLEX	FIELD(1, 1, 0)
-#define UMAL_CFG2_CRCENABLE	FIELD(1, 1, 1)
-#define UMAL_CFG2_PADCRC	FIELD(1, 1, 2)
-#define UMAL_CFG2_LENGTHCHECK	FIELD(1, 1, 4)
-#define UMAL_CFG2_MODEMASK	FMASK(2, 8)
-#define UMAL_CFG2_NIBBLEMODE	FIELD(1, 2, 8)
-#define UMAL_CFG2_BYTEMODE	FIELD(2, 2, 8)
-#define UMAL_CFG2_PREAMBLENMASK	FMASK(4, 12)
-#define UMAL_CFG2_DEFPREAMBLEN	FIELD(7, 4, 12)
-#define UMAL_CFG2_FD100		(UMAL_CFG2_DEFPREAMBLEN | UMAL_CFG2_NIBBLEMODE \
-				| UMAL_CFG2_LENGTHCHECK | UMAL_CFG2_PADCRC \
-				| UMAL_CFG2_CRCENABLE | UMAL_CFG2_FULLDUPLEX)
-#define UMAL_CFG2_FD1000	(UMAL_CFG2_DEFPREAMBLEN | UMAL_CFG2_BYTEMODE \
-				| UMAL_CFG2_LENGTHCHECK | UMAL_CFG2_PADCRC \
-				| UMAL_CFG2_CRCENABLE | UMAL_CFG2_FULLDUPLEX)
-#define UMAL_CFG2_HD100		(UMAL_CFG2_DEFPREAMBLEN | UMAL_CFG2_NIBBLEMODE \
-				| UMAL_CFG2_LENGTHCHECK | UMAL_CFG2_PADCRC \
-				| UMAL_CFG2_CRCENABLE)
-
-/*
- * Command for UMAL_IFCTRL register
- */
-#define UMAL_IFCTRL_RESET	FIELD(1, 1, 31)
-
-/*
- * Command for UMAL_MIICFG register
- */
-#define UMAL_MIICFG_RESET	FIELD(1, 1, 31)
-
-/*
- * Command for UMAL_MIICMD register
- */
-#define UMAL_MIICMD_READ	FIELD(1, 1, 0)
-
-/*
- * Command for UMAL_MIIIDCT register
- */
-#define UMAL_MIIIDCT_BUSY	FIELD(1, 1, 0)
-#define UMAL_MIIIDCT_NOTVALID	FIELD(1, 1, 2)
-
-/*
- * Commands for DMATxCtrl regesters
- */
-#define UMAL_DMA_Enable		FIELD(1, 1, 0)
-
-/*
- * Commands for DMARxCtrl regesters
- */
-#define UMAL_DMAIntrMask_ENABLEHALFWORD	FIELD(1, 1, 16)
-
-/*
- * Command for DMARxStatus
- */
-#define CLR_RX_BUS_ERR		FIELD(1, 1, 3)
-#define CLR_RX_OVERFLOW		FIELD(1, 1, 2)
-#define CLR_RX_PKT		FIELD(1, 1, 0)
-
-/*
- * Command for DMATxStatus
- */
-#define CLR_TX_BUS_ERR		FIELD(1, 1, 3)
-#define CLR_TX_UNDERRUN		FIELD(1, 1, 1)
-#define CLR_TX_PKT		FIELD(1, 1, 0)
-
-/*
- * Commands for DMAIntrMask and DMAInterrupt register
- */
-#define INT_RX_MASK		FIELD(0xd, 4, 4)
-#define INT_TX_MASK		FIELD(0xb, 4, 0)
-
-#define INT_RX_BUS_ERR		FIELD(1, 1, 7)
-#define INT_RX_OVERFLOW		FIELD(1, 1, 6)
-#define INT_RX_PKT		FIELD(1, 1, 4)
-#define INT_TX_BUS_ERR		FIELD(1, 1, 3)
-#define INT_TX_UNDERRUN		FIELD(1, 1, 1)
-#define INT_TX_PKT		FIELD(1, 1, 0)
-
-/*
- * MARCOS of UMAL's descriptors
- */
-#define UMAL_DESC_PACKETSIZE_EMPTY	FIELD(1, 1, 31)
-#define UMAL_DESC_PACKETSIZE_NONEMPTY	FIELD(0, 1, 31)
-#define UMAL_DESC_PACKETSIZE_SIZEMASK	FMASK(12, 0)
-
diff --git a/arch/unicore32/include/mach/regs-unigfx.h b/arch/unicore32/include/mach/regs-unigfx.h
deleted file mode 100644
index 553d1157c6b2..000000000000
--- a/arch/unicore32/include/mach/regs-unigfx.h
+++ /dev/null
@@ -1,201 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * PKUnity UNIGFX Registers
- */
-
-#define UDE_BASE      (PKUNITY_UNIGFX_BASE + 0x1400)
-#define UGE_BASE      (PKUNITY_UNIGFX_BASE + 0x0000)
-
-/*
- * command reg for UNIGFX DE
- */
-/*
- * control reg UDE_CFG
- */
-#define UDE_CFG       (UDE_BASE + 0x0000)
-/*
- * framebuffer start address reg UDE_FSA
- */
-#define UDE_FSA       (UDE_BASE + 0x0004)
-/*
- * line size reg UDE_LS
- */
-#define UDE_LS        (UDE_BASE + 0x0008)
-/*
- * pitch size reg UDE_PS
- */
-#define UDE_PS        (UDE_BASE + 0x000C)
-/*
- * horizontal active time reg UDE_HAT
- */
-#define UDE_HAT       (UDE_BASE + 0x0010)
-/*
- * horizontal blank time reg UDE_HBT
- */
-#define UDE_HBT       (UDE_BASE + 0x0014)
-/*
- * horizontal sync time reg UDE_HST
- */
-#define UDE_HST       (UDE_BASE + 0x0018)
-/*
- * vertival active time reg UDE_VAT
- */
-#define UDE_VAT       (UDE_BASE + 0x001C)
-/*
- * vertival blank time reg UDE_VBT
- */
-#define UDE_VBT       (UDE_BASE + 0x0020)
-/*
- * vertival sync time reg UDE_VST
- */
-#define UDE_VST       (UDE_BASE + 0x0024)
-/*
- * cursor position UDE_CXY
- */
-#define UDE_CXY       (UDE_BASE + 0x0028)
-/*
- * cursor front color UDE_CC0
- */
-#define UDE_CC0       (UDE_BASE + 0x002C)
-/*
- * cursor background color UDE_CC1
- */
-#define UDE_CC1       (UDE_BASE + 0x0030)
-/*
- * video position UDE_VXY
- */
-#define UDE_VXY       (UDE_BASE + 0x0034)
-/*
- * video start address reg UDE_VSA
- */
-#define UDE_VSA       (UDE_BASE + 0x0040)
-/*
- * video size reg UDE_VS
- */
-#define UDE_VS        (UDE_BASE + 0x004C)
-
-/*
- * command reg for UNIGFX GE
- */
-/*
- * src xy reg UGE_SRCXY
- */
-#define UGE_SRCXY     (UGE_BASE + 0x0000)
-/*
- * dst xy reg UGE_DSTXY
- */
-#define UGE_DSTXY     (UGE_BASE + 0x0004)
-/*
- * pitch reg UGE_PITCH
- */
-#define UGE_PITCH     (UGE_BASE + 0x0008)
-/*
- * src start reg UGE_SRCSTART
- */
-#define UGE_SRCSTART  (UGE_BASE + 0x000C)
-/*
- * dst start reg UGE_DSTSTART
- */
-#define UGE_DSTSTART  (UGE_BASE + 0x0010)
-/*
- * width height reg UGE_WIDHEIGHT
- */
-#define UGE_WIDHEIGHT (UGE_BASE + 0x0014)
-/*
- * rop alpah reg UGE_ROPALPHA
- */
-#define UGE_ROPALPHA  (UGE_BASE + 0x0018)
-/*
- * front color UGE_FCOLOR
- */
-#define UGE_FCOLOR    (UGE_BASE + 0x001C)
-/*
- * background color UGE_BCOLOR
- */
-#define UGE_BCOLOR    (UGE_BASE + 0x0020)
-/*
- * src color key for high value UGE_SCH
- */
-#define UGE_SCH       (UGE_BASE + 0x0024)
-/*
- * dst color key for high value UGE_DCH
- */
-#define UGE_DCH       (UGE_BASE + 0x0028)
-/*
- * src color key for low value UGE_SCL
- */
-#define UGE_SCL       (UGE_BASE + 0x002C)
-/*
- * dst color key for low value UGE_DCL
- */
-#define UGE_DCL       (UGE_BASE + 0x0030)
-/*
- * clip 0 reg UGE_CLIP0
- */
-#define UGE_CLIP0     (UGE_BASE + 0x0034)
-/*
- * clip 1 reg UGE_CLIP1
- */
-#define UGE_CLIP1     (UGE_BASE + 0x0038)
-/*
- * command reg UGE_COMMAND
- */
-#define UGE_COMMAND   (UGE_BASE + 0x003C)
-/*
- * pattern 0 UGE_P0
- */
-#define UGE_P0        (UGE_BASE + 0x0040)
-#define UGE_P1        (UGE_BASE + 0x0044)
-#define UGE_P2        (UGE_BASE + 0x0048)
-#define UGE_P3        (UGE_BASE + 0x004C)
-#define UGE_P4        (UGE_BASE + 0x0050)
-#define UGE_P5        (UGE_BASE + 0x0054)
-#define UGE_P6        (UGE_BASE + 0x0058)
-#define UGE_P7        (UGE_BASE + 0x005C)
-#define UGE_P8        (UGE_BASE + 0x0060)
-#define UGE_P9        (UGE_BASE + 0x0064)
-#define UGE_P10       (UGE_BASE + 0x0068)
-#define UGE_P11       (UGE_BASE + 0x006C)
-#define UGE_P12       (UGE_BASE + 0x0070)
-#define UGE_P13       (UGE_BASE + 0x0074)
-#define UGE_P14       (UGE_BASE + 0x0078)
-#define UGE_P15       (UGE_BASE + 0x007C)
-#define UGE_P16       (UGE_BASE + 0x0080)
-#define UGE_P17       (UGE_BASE + 0x0084)
-#define UGE_P18       (UGE_BASE + 0x0088)
-#define UGE_P19       (UGE_BASE + 0x008C)
-#define UGE_P20       (UGE_BASE + 0x0090)
-#define UGE_P21       (UGE_BASE + 0x0094)
-#define UGE_P22       (UGE_BASE + 0x0098)
-#define UGE_P23       (UGE_BASE + 0x009C)
-#define UGE_P24       (UGE_BASE + 0x00A0)
-#define UGE_P25       (UGE_BASE + 0x00A4)
-#define UGE_P26       (UGE_BASE + 0x00A8)
-#define UGE_P27       (UGE_BASE + 0x00AC)
-#define UGE_P28       (UGE_BASE + 0x00B0)
-#define UGE_P29       (UGE_BASE + 0x00B4)
-#define UGE_P30       (UGE_BASE + 0x00B8)
-#define UGE_P31       (UGE_BASE + 0x00BC)
-
-#define UDE_CFG_DST_MASK	FMASK(2, 8)
-#define UDE_CFG_DST8            FIELD(0x0, 2, 8)
-#define UDE_CFG_DST16           FIELD(0x1, 2, 8)
-#define UDE_CFG_DST24           FIELD(0x2, 2, 8)
-#define UDE_CFG_DST32           FIELD(0x3, 2, 8)
-
-/*
- * GDEN enable UDE_CFG_GDEN_ENABLE
- */
-#define UDE_CFG_GDEN_ENABLE     FIELD(1, 1, 3)
-/*
- * VDEN enable UDE_CFG_VDEN_ENABLE
- */
-#define UDE_CFG_VDEN_ENABLE     FIELD(1, 1, 4)
-/*
- * CDEN enable UDE_CFG_CDEN_ENABLE
- */
-#define UDE_CFG_CDEN_ENABLE     FIELD(1, 1, 5)
-/*
- * TIMEUP enable UDE_CFG_TIMEUP_ENABLE
- */
-#define UDE_CFG_TIMEUP_ENABLE   FIELD(1, 1, 6)
diff --git a/arch/unicore32/include/mach/uncompress.h b/arch/unicore32/include/mach/uncompress.h
deleted file mode 100644
index 0c1a56a1913f..000000000000
--- a/arch/unicore32/include/mach/uncompress.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/include/mach/uncompress.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-
-#ifndef __MACH_PUV3_UNCOMPRESS_H__
-#define __MACH_PUV3_UNCOMPRESS_H__
-
-#include <mach/hardware.h>
-#include <mach/ocd.h>
-
-extern char input_data[];
-extern char input_data_end[];
-
-static void arch_decomp_puts(const char *ptr)
-{
-	char c;
-
-	while ((c = *ptr++) != '\0') {
-		if (c == '\n')
-			putc('\r');
-		putc(c);
-	}
-}
-#define ARCH_HAVE_DECOMP_PUTS
-
-#endif /* __MACH_PUV3_UNCOMPRESS_H__ */
diff --git a/arch/unicore32/include/uapi/asm/Kbuild b/arch/unicore32/include/uapi/asm/Kbuild
deleted file mode 100644
index e78470141932..000000000000
--- a/arch/unicore32/include/uapi/asm/Kbuild
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-generic-y += ucontext.h
diff --git a/arch/unicore32/include/uapi/asm/byteorder.h b/arch/unicore32/include/uapi/asm/byteorder.h
deleted file mode 100644
index 864fe4814cf4..000000000000
--- a/arch/unicore32/include/uapi/asm/byteorder.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-/*
- * linux/arch/unicore32/include/asm/byteorder.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * UniCore ONLY support Little Endian mode, the data bus is connected such
- * that byte accesses appear as:
- *  0 = d0...d7, 1 = d8...d15, 2 = d16...d23, 3 = d24...d31
- * and word accesses (data or instruction) appear as:
- *  d0...d31
- */
-#ifndef __UNICORE_BYTEORDER_H__
-#define __UNICORE_BYTEORDER_H__
-
-#include <linux/byteorder/little_endian.h>
-
-#endif
-
diff --git a/arch/unicore32/include/uapi/asm/ptrace.h b/arch/unicore32/include/uapi/asm/ptrace.h
deleted file mode 100644
index 2820de83e37d..000000000000
--- a/arch/unicore32/include/uapi/asm/ptrace.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-/*
- * linux/arch/unicore32/include/asm/ptrace.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef _UAPI__UNICORE_PTRACE_H__
-#define _UAPI__UNICORE_PTRACE_H__
-
-#define PTRACE_GET_THREAD_AREA	22
-
-/*
- * PSR bits
- */
-#define USER_MODE	0x00000010
-#define REAL_MODE	0x00000011
-#define INTR_MODE	0x00000012
-#define PRIV_MODE	0x00000013
-#define ABRT_MODE	0x00000017
-#define EXTN_MODE	0x0000001b
-#define SUSR_MODE	0x0000001f
-#define MODE_MASK	0x0000001f
-#define PSR_R_BIT	0x00000040
-#define PSR_I_BIT	0x00000080
-#define PSR_V_BIT	0x10000000
-#define PSR_C_BIT	0x20000000
-#define PSR_Z_BIT	0x40000000
-#define PSR_S_BIT	0x80000000
-
-/*
- * Groups of PSR bits
- */
-#define PSR_f		0xff000000	/* Flags		*/
-#define PSR_c		0x000000ff	/* Control		*/
-
-#ifndef __ASSEMBLY__
-
-/*
- * This struct defines the way the registers are stored on the
- * stack during a system call.  Note that sizeof(struct pt_regs)
- * has to be a multiple of 8.
- */
-struct pt_regs {
-	unsigned long uregs[34];
-};
-
-#define UCreg_asr		uregs[32]
-#define UCreg_pc		uregs[31]
-#define UCreg_lr		uregs[30]
-#define UCreg_sp		uregs[29]
-#define UCreg_ip		uregs[28]
-#define UCreg_fp		uregs[27]
-#define UCreg_26		uregs[26]
-#define UCreg_25		uregs[25]
-#define UCreg_24		uregs[24]
-#define UCreg_23		uregs[23]
-#define UCreg_22		uregs[22]
-#define UCreg_21		uregs[21]
-#define UCreg_20		uregs[20]
-#define UCreg_19		uregs[19]
-#define UCreg_18		uregs[18]
-#define UCreg_17		uregs[17]
-#define UCreg_16		uregs[16]
-#define UCreg_15		uregs[15]
-#define UCreg_14		uregs[14]
-#define UCreg_13		uregs[13]
-#define UCreg_12		uregs[12]
-#define UCreg_11		uregs[11]
-#define UCreg_10		uregs[10]
-#define UCreg_09		uregs[9]
-#define UCreg_08		uregs[8]
-#define UCreg_07		uregs[7]
-#define UCreg_06		uregs[6]
-#define UCreg_05		uregs[5]
-#define UCreg_04		uregs[4]
-#define UCreg_03		uregs[3]
-#define UCreg_02		uregs[2]
-#define UCreg_01		uregs[1]
-#define UCreg_00		uregs[0]
-#define UCreg_ORIG_00		uregs[33]
-
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* _UAPI__UNICORE_PTRACE_H__ */
diff --git a/arch/unicore32/include/uapi/asm/sigcontext.h b/arch/unicore32/include/uapi/asm/sigcontext.h
deleted file mode 100644
index 79e56f28e4b5..000000000000
--- a/arch/unicore32/include/uapi/asm/sigcontext.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-/*
- * linux/arch/unicore32/include/asm/sigcontext.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __UNICORE_SIGCONTEXT_H__
-#define __UNICORE_SIGCONTEXT_H__
-
-#include <asm/ptrace.h>
-/*
- * Signal context structure - contains all info to do with the state
- * before the signal handler was invoked.  Note: only add new entries
- * to the end of the structure.
- */
-struct sigcontext {
-	unsigned long trap_no;
-	unsigned long error_code;
-	unsigned long oldmask;
-	unsigned long fault_address;
-	struct pt_regs regs;
-};
-
-#endif
diff --git a/arch/unicore32/include/uapi/asm/unistd.h b/arch/unicore32/include/uapi/asm/unistd.h
deleted file mode 100644
index 54a7378a70b1..000000000000
--- a/arch/unicore32/include/uapi/asm/unistd.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-/*
- * linux/arch/unicore32/include/asm/unistd.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#define __ARCH_WANT_RENAMEAT
-#define __ARCH_WANT_SET_GET_RLIMIT
-#define __ARCH_WANT_STAT64
-#define __ARCH_WANT_TIME32_SYSCALLS
-
-/* Use the standard ABI for syscalls. */
-#include <asm-generic/unistd.h>
-#define __ARCH_WANT_SYS_CLONE
diff --git a/arch/unicore32/kernel/Makefile b/arch/unicore32/kernel/Makefile
deleted file mode 100644
index 2f79aa56735b..000000000000
--- a/arch/unicore32/kernel/Makefile
+++ /dev/null
@@ -1,31 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-obj-y				:= dma.o elf.o entry.o process.o ptrace.o
-obj-y				+= setup.o signal.o sys.o stacktrace.o traps.o
-
-obj-$(CONFIG_MODULES)		+= ksyms.o module.o
-obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
-
-obj-$(CONFIG_UNICORE_FPU_F64)	+= fpu-ucf64.o
-
-# obj-y for architecture PKUnity v3
-obj-$(CONFIG_ARCH_PUV3)		+= clock.o irq.o time.o
-
-obj-$(CONFIG_PUV3_GPIO)		+= gpio.o
-obj-$(CONFIG_PUV3_PM)		+= pm.o sleep.o
-obj-$(CONFIG_HIBERNATION)	+= hibernate.o hibernate_asm.o
-
-obj-$(CONFIG_PCI)		+= pci.o
-
-# obj-y for specific machines
-obj-$(CONFIG_ARCH_PUV3)		+= puv3-core.o
-obj-$(CONFIG_PUV3_NB0916)	+= puv3-nb0916.o
-
-head-y				:= head.o
-obj-$(CONFIG_DEBUG_LL)		+= debug.o
-
-extra-y				:= $(head-y) vmlinux.lds
diff --git a/arch/unicore32/kernel/asm-offsets.c b/arch/unicore32/kernel/asm-offsets.c
deleted file mode 100644
index f7d672267549..000000000000
--- a/arch/unicore32/kernel/asm-offsets.c
+++ /dev/null
@@ -1,108 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/asm-offsets.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- *
- * Generate definitions needed by assembly language modules.
- * This code generates raw asm output which is post-processed to extract
- * and format the required data.
- */
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/dma-mapping.h>
-#include <linux/kbuild.h>
-#include <linux/suspend.h>
-#include <linux/thread_info.h>
-#include <asm/memory.h>
-#include <asm/suspend.h>
-
-/*
- * GCC 3.0, 3.1: general bad code generation.
- * GCC 3.2.0: incorrect function argument offset calculation.
- * GCC 3.2.x: miscompiles NEW_AUX_ENT in fs/binfmt_elf.c
- *	(http://gcc.gnu.org/PR8896) and incorrect structure
- *		initialisation in fs/jffs2/erase.c
- */
-#if (__GNUC__ < 4)
-#error Your compiler should upgrade to uc4
-#error	Known good compilers: 4.2.2
-#endif
-
-int main(void)
-{
-	DEFINE(TSK_ACTIVE_MM,	offsetof(struct task_struct, active_mm));
-	BLANK();
-	DEFINE(TI_FLAGS,	offsetof(struct thread_info, flags));
-	DEFINE(TI_PREEMPT,	offsetof(struct thread_info, preempt_count));
-	DEFINE(TI_ADDR_LIMIT,	offsetof(struct thread_info, addr_limit));
-	DEFINE(TI_TASK,		offsetof(struct thread_info, task));
-	DEFINE(TI_CPU,		offsetof(struct thread_info, cpu));
-	DEFINE(TI_CPU_SAVE,	offsetof(struct thread_info, cpu_context));
-	DEFINE(TI_USED_CP,	offsetof(struct thread_info, used_cp));
-#ifdef CONFIG_UNICORE_FPU_F64
-	DEFINE(TI_FPSTATE,	offsetof(struct thread_info, fpstate));
-#endif
-	BLANK();
-	DEFINE(S_R0,		offsetof(struct pt_regs, UCreg_00));
-	DEFINE(S_R1,		offsetof(struct pt_regs, UCreg_01));
-	DEFINE(S_R2,		offsetof(struct pt_regs, UCreg_02));
-	DEFINE(S_R3,		offsetof(struct pt_regs, UCreg_03));
-	DEFINE(S_R4,		offsetof(struct pt_regs, UCreg_04));
-	DEFINE(S_R5,		offsetof(struct pt_regs, UCreg_05));
-	DEFINE(S_R6,		offsetof(struct pt_regs, UCreg_06));
-	DEFINE(S_R7,		offsetof(struct pt_regs, UCreg_07));
-	DEFINE(S_R8,		offsetof(struct pt_regs, UCreg_08));
-	DEFINE(S_R9,		offsetof(struct pt_regs, UCreg_09));
-	DEFINE(S_R10,		offsetof(struct pt_regs, UCreg_10));
-	DEFINE(S_R11,		offsetof(struct pt_regs, UCreg_11));
-	DEFINE(S_R12,		offsetof(struct pt_regs, UCreg_12));
-	DEFINE(S_R13,		offsetof(struct pt_regs, UCreg_13));
-	DEFINE(S_R14,		offsetof(struct pt_regs, UCreg_14));
-	DEFINE(S_R15,		offsetof(struct pt_regs, UCreg_15));
-	DEFINE(S_R16,		offsetof(struct pt_regs, UCreg_16));
-	DEFINE(S_R17,		offsetof(struct pt_regs, UCreg_17));
-	DEFINE(S_R18,		offsetof(struct pt_regs, UCreg_18));
-	DEFINE(S_R19,		offsetof(struct pt_regs, UCreg_19));
-	DEFINE(S_R20,		offsetof(struct pt_regs, UCreg_20));
-	DEFINE(S_R21,		offsetof(struct pt_regs, UCreg_21));
-	DEFINE(S_R22,		offsetof(struct pt_regs, UCreg_22));
-	DEFINE(S_R23,		offsetof(struct pt_regs, UCreg_23));
-	DEFINE(S_R24,		offsetof(struct pt_regs, UCreg_24));
-	DEFINE(S_R25,		offsetof(struct pt_regs, UCreg_25));
-	DEFINE(S_R26,		offsetof(struct pt_regs, UCreg_26));
-	DEFINE(S_FP,		offsetof(struct pt_regs, UCreg_fp));
-	DEFINE(S_IP,		offsetof(struct pt_regs, UCreg_ip));
-	DEFINE(S_SP,		offsetof(struct pt_regs, UCreg_sp));
-	DEFINE(S_LR,		offsetof(struct pt_regs, UCreg_lr));
-	DEFINE(S_PC,		offsetof(struct pt_regs, UCreg_pc));
-	DEFINE(S_PSR,		offsetof(struct pt_regs, UCreg_asr));
-	DEFINE(S_OLD_R0,	offsetof(struct pt_regs, UCreg_ORIG_00));
-	DEFINE(S_FRAME_SIZE,	sizeof(struct pt_regs));
-	BLANK();
-	DEFINE(VMA_VM_MM,	offsetof(struct vm_area_struct, vm_mm));
-	DEFINE(VMA_VM_FLAGS,	offsetof(struct vm_area_struct, vm_flags));
-	BLANK();
-	DEFINE(VM_EXEC,		VM_EXEC);
-	BLANK();
-	DEFINE(PAGE_SZ,		PAGE_SIZE);
-	BLANK();
-	DEFINE(SYS_ERROR0,	0x9f0000);
-	BLANK();
-	DEFINE(PBE_ADDRESS,		offsetof(struct pbe, address));
-	DEFINE(PBE_ORIN_ADDRESS,	offsetof(struct pbe, orig_address));
-	DEFINE(PBE_NEXT,		offsetof(struct pbe, next));
-	DEFINE(SWSUSP_CPU,		offsetof(struct swsusp_arch_regs, \
-							cpu_context));
-#ifdef	CONFIG_UNICORE_FPU_F64
-	DEFINE(SWSUSP_FPSTATE,		offsetof(struct swsusp_arch_regs, \
-							fpstate));
-#endif
-	BLANK();
-	DEFINE(DMA_BIDIRECTIONAL,	DMA_BIDIRECTIONAL);
-	DEFINE(DMA_TO_DEVICE,		DMA_TO_DEVICE);
-	DEFINE(DMA_FROM_DEVICE,		DMA_FROM_DEVICE);
-	return 0;
-}
diff --git a/arch/unicore32/kernel/clock.c b/arch/unicore32/kernel/clock.c
deleted file mode 100644
index 41df6be0a3b2..000000000000
--- a/arch/unicore32/kernel/clock.c
+++ /dev/null
@@ -1,387 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/clock.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- *	Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
- *	Copyright (C) 2001-2010 Guan Xuetao
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/string.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-
-/*
- * Very simple clock implementation
- */
-struct clk {
-	struct list_head	node;
-	unsigned long		rate;
-	const char		*name;
-};
-
-static struct clk clk_ost_clk = {
-	.name		= "OST_CLK",
-	.rate		= CLOCK_TICK_RATE,
-};
-
-static struct clk clk_mclk_clk = {
-	.name		= "MAIN_CLK",
-};
-
-static struct clk clk_bclk32_clk = {
-	.name		= "BUS32_CLK",
-};
-
-static struct clk clk_ddr_clk = {
-	.name		= "DDR_CLK",
-};
-
-static struct clk clk_vga_clk = {
-	.name		= "VGA_CLK",
-};
-
-static LIST_HEAD(clocks);
-static DEFINE_MUTEX(clocks_mutex);
-
-struct clk *clk_get(struct device *dev, const char *id)
-{
-	struct clk *p, *clk = ERR_PTR(-ENOENT);
-
-	mutex_lock(&clocks_mutex);
-	list_for_each_entry(p, &clocks, node) {
-		if (strcmp(id, p->name) == 0) {
-			clk = p;
-			break;
-		}
-	}
-	mutex_unlock(&clocks_mutex);
-
-	return clk;
-}
-EXPORT_SYMBOL(clk_get);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
-
-int clk_enable(struct clk *clk)
-{
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	return clk->rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-struct {
-	unsigned long rate;
-	unsigned long cfg;
-	unsigned long div;
-} vga_clk_table[] = {
-	{.rate =  25175000, .cfg = 0x00002001, .div = 0x9},
-	{.rate =  31500000, .cfg = 0x00002001, .div = 0x7},
-	{.rate =  40000000, .cfg = 0x00003801, .div = 0x9},
-	{.rate =  49500000, .cfg = 0x00003801, .div = 0x7},
-	{.rate =  65000000, .cfg = 0x00002c01, .div = 0x4},
-	{.rate =  78750000, .cfg = 0x00002400, .div = 0x7},
-	{.rate = 108000000, .cfg = 0x00002c01, .div = 0x2},
-	{.rate = 106500000, .cfg = 0x00003c01, .div = 0x3},
-	{.rate =  50650000, .cfg = 0x00106400, .div = 0x9},
-	{.rate =  61500000, .cfg = 0x00106400, .div = 0xa},
-	{.rate =  85500000, .cfg = 0x00002800, .div = 0x6},
-};
-
-struct {
-	unsigned long mrate;
-	unsigned long prate;
-} mclk_clk_table[] = {
-	{.mrate = 500000000, .prate = 0x00109801},
-	{.mrate = 525000000, .prate = 0x00104C00},
-	{.mrate = 550000000, .prate = 0x00105000},
-	{.mrate = 575000000, .prate = 0x00105400},
-	{.mrate = 600000000, .prate = 0x00105800},
-	{.mrate = 625000000, .prate = 0x00105C00},
-	{.mrate = 650000000, .prate = 0x00106000},
-	{.mrate = 675000000, .prate = 0x00106400},
-	{.mrate = 700000000, .prate = 0x00106800},
-	{.mrate = 725000000, .prate = 0x00106C00},
-	{.mrate = 750000000, .prate = 0x00107000},
-	{.mrate = 775000000, .prate = 0x00107400},
-	{.mrate = 800000000, .prate = 0x00107800},
-};
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	if (clk == &clk_vga_clk) {
-		unsigned long pll_vgacfg, pll_vgadiv;
-		int ret, i;
-
-		/* lookup vga_clk_table */
-		ret = -EINVAL;
-		for (i = 0; i < ARRAY_SIZE(vga_clk_table); i++) {
-			if (rate == vga_clk_table[i].rate) {
-				pll_vgacfg = vga_clk_table[i].cfg;
-				pll_vgadiv = vga_clk_table[i].div;
-				ret = 0;
-				break;
-			}
-		}
-
-		if (ret)
-			return ret;
-
-		if (readl(PM_PLLVGACFG) == pll_vgacfg)
-			return 0;
-
-		/* set pll vga cfg reg. */
-		writel(pll_vgacfg, PM_PLLVGACFG);
-
-		writel(PM_PMCR_CFBVGA, PM_PMCR);
-		while ((readl(PM_PLLDFCDONE) & PM_PLLDFCDONE_VGADFC)
-				!= PM_PLLDFCDONE_VGADFC)
-			udelay(100); /* about 1ms */
-
-		/* set div cfg reg. */
-		writel(readl(PM_PCGR) | PM_PCGR_VGACLK, PM_PCGR);
-
-		writel((readl(PM_DIVCFG) & ~PM_DIVCFG_VGACLK_MASK)
-				| PM_DIVCFG_VGACLK(pll_vgadiv), PM_DIVCFG);
-
-		writel(readl(PM_SWRESET) | PM_SWRESET_VGADIV, PM_SWRESET);
-		while ((readl(PM_SWRESET) & PM_SWRESET_VGADIV)
-				== PM_SWRESET_VGADIV)
-			udelay(100); /* 65536 bclk32, about 320us */
-
-		writel(readl(PM_PCGR) & ~PM_PCGR_VGACLK, PM_PCGR);
-	}
-#ifdef CONFIG_CPU_FREQ
-	if (clk == &clk_mclk_clk) {
-		u32 pll_rate, divstatus = readl(PM_DIVSTATUS);
-		int ret, i;
-
-		/* lookup mclk_clk_table */
-		ret = -EINVAL;
-		for (i = 0; i < ARRAY_SIZE(mclk_clk_table); i++) {
-			if (rate == mclk_clk_table[i].mrate) {
-				pll_rate = mclk_clk_table[i].prate;
-				clk_mclk_clk.rate = mclk_clk_table[i].mrate;
-				ret = 0;
-				break;
-			}
-		}
-
-		if (ret)
-			return ret;
-
-		if (clk_mclk_clk.rate)
-			clk_bclk32_clk.rate = clk_mclk_clk.rate
-				/ (((divstatus & 0x0000f000) >> 12) + 1);
-
-		/* set pll sys cfg reg. */
-		writel(pll_rate, PM_PLLSYSCFG);
-
-		writel(PM_PMCR_CFBSYS, PM_PMCR);
-		while ((readl(PM_PLLDFCDONE) & PM_PLLDFCDONE_SYSDFC)
-				!= PM_PLLDFCDONE_SYSDFC)
-			udelay(100);
-			/* about 1ms */
-	}
-#endif
-	return 0;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-int clk_register(struct clk *clk)
-{
-	mutex_lock(&clocks_mutex);
-	list_add(&clk->node, &clocks);
-	mutex_unlock(&clocks_mutex);
-	printk(KERN_DEFAULT "PKUnity PM: %s %lu.%02luM\n", clk->name,
-		(clk->rate)/1000000, (clk->rate)/10000 % 100);
-	return 0;
-}
-EXPORT_SYMBOL(clk_register);
-
-void clk_unregister(struct clk *clk)
-{
-	mutex_lock(&clocks_mutex);
-	list_del(&clk->node);
-	mutex_unlock(&clocks_mutex);
-}
-EXPORT_SYMBOL(clk_unregister);
-
-struct {
-	unsigned long prate;
-	unsigned long rate;
-} pllrate_table[] = {
-	{.prate = 0x00002001, .rate = 250000000},
-	{.prate = 0x00104801, .rate = 250000000},
-	{.prate = 0x00104C01, .rate = 262500000},
-	{.prate = 0x00002401, .rate = 275000000},
-	{.prate = 0x00105001, .rate = 275000000},
-	{.prate = 0x00105401, .rate = 287500000},
-	{.prate = 0x00002801, .rate = 300000000},
-	{.prate = 0x00105801, .rate = 300000000},
-	{.prate = 0x00105C01, .rate = 312500000},
-	{.prate = 0x00002C01, .rate = 325000000},
-	{.prate = 0x00106001, .rate = 325000000},
-	{.prate = 0x00106401, .rate = 337500000},
-	{.prate = 0x00003001, .rate = 350000000},
-	{.prate = 0x00106801, .rate = 350000000},
-	{.prate = 0x00106C01, .rate = 362500000},
-	{.prate = 0x00003401, .rate = 375000000},
-	{.prate = 0x00107001, .rate = 375000000},
-	{.prate = 0x00107401, .rate = 387500000},
-	{.prate = 0x00003801, .rate = 400000000},
-	{.prate = 0x00107801, .rate = 400000000},
-	{.prate = 0x00107C01, .rate = 412500000},
-	{.prate = 0x00003C01, .rate = 425000000},
-	{.prate = 0x00108001, .rate = 425000000},
-	{.prate = 0x00108401, .rate = 437500000},
-	{.prate = 0x00004001, .rate = 450000000},
-	{.prate = 0x00108801, .rate = 450000000},
-	{.prate = 0x00108C01, .rate = 462500000},
-	{.prate = 0x00004401, .rate = 475000000},
-	{.prate = 0x00109001, .rate = 475000000},
-	{.prate = 0x00109401, .rate = 487500000},
-	{.prate = 0x00004801, .rate = 500000000},
-	{.prate = 0x00109801, .rate = 500000000},
-	{.prate = 0x00104C00, .rate = 525000000},
-	{.prate = 0x00002400, .rate = 550000000},
-	{.prate = 0x00105000, .rate = 550000000},
-	{.prate = 0x00105400, .rate = 575000000},
-	{.prate = 0x00002800, .rate = 600000000},
-	{.prate = 0x00105800, .rate = 600000000},
-	{.prate = 0x00105C00, .rate = 625000000},
-	{.prate = 0x00002C00, .rate = 650000000},
-	{.prate = 0x00106000, .rate = 650000000},
-	{.prate = 0x00106400, .rate = 675000000},
-	{.prate = 0x00003000, .rate = 700000000},
-	{.prate = 0x00106800, .rate = 700000000},
-	{.prate = 0x00106C00, .rate = 725000000},
-	{.prate = 0x00003400, .rate = 750000000},
-	{.prate = 0x00107000, .rate = 750000000},
-	{.prate = 0x00107400, .rate = 775000000},
-	{.prate = 0x00003800, .rate = 800000000},
-	{.prate = 0x00107800, .rate = 800000000},
-	{.prate = 0x00107C00, .rate = 825000000},
-	{.prate = 0x00003C00, .rate = 850000000},
-	{.prate = 0x00108000, .rate = 850000000},
-	{.prate = 0x00108400, .rate = 875000000},
-	{.prate = 0x00004000, .rate = 900000000},
-	{.prate = 0x00108800, .rate = 900000000},
-	{.prate = 0x00108C00, .rate = 925000000},
-	{.prate = 0x00004400, .rate = 950000000},
-	{.prate = 0x00109000, .rate = 950000000},
-	{.prate = 0x00109400, .rate = 975000000},
-	{.prate = 0x00004800, .rate = 1000000000},
-	{.prate = 0x00109800, .rate = 1000000000},
-};
-
-struct {
-	unsigned long prate;
-	unsigned long drate;
-} pddr_table[] = {
-	{.prate = 0x00100800, .drate = 44236800},
-	{.prate = 0x00100C00, .drate = 66355200},
-	{.prate = 0x00101000, .drate = 88473600},
-	{.prate = 0x00101400, .drate = 110592000},
-	{.prate = 0x00101800, .drate = 132710400},
-	{.prate = 0x00101C01, .drate = 154828800},
-	{.prate = 0x00102001, .drate = 176947200},
-	{.prate = 0x00102401, .drate = 199065600},
-	{.prate = 0x00102801, .drate = 221184000},
-	{.prate = 0x00102C01, .drate = 243302400},
-	{.prate = 0x00103001, .drate = 265420800},
-	{.prate = 0x00103401, .drate = 287539200},
-	{.prate = 0x00103801, .drate = 309657600},
-	{.prate = 0x00103C01, .drate = 331776000},
-	{.prate = 0x00104001, .drate = 353894400},
-};
-
-static int __init clk_init(void)
-{
-#ifdef CONFIG_PUV3_PM
-	u32 pllrate, divstatus = readl(PM_DIVSTATUS);
-	u32 pcgr_val = readl(PM_PCGR);
-	int i;
-
-	pcgr_val |= PM_PCGR_BCLKMME | PM_PCGR_BCLKH264E | PM_PCGR_BCLKH264D
-			| PM_PCGR_HECLK | PM_PCGR_HDCLK;
-	writel(pcgr_val, PM_PCGR);
-
-	pllrate = readl(PM_PLLSYSSTATUS);
-
-	/* lookup pmclk_table */
-	clk_mclk_clk.rate = 0;
-	for (i = 0; i < ARRAY_SIZE(pllrate_table); i++) {
-		if (pllrate == pllrate_table[i].prate) {
-			clk_mclk_clk.rate = pllrate_table[i].rate;
-			break;
-		}
-	}
-
-	if (clk_mclk_clk.rate)
-		clk_bclk32_clk.rate = clk_mclk_clk.rate /
-			(((divstatus & 0x0000f000) >> 12) + 1);
-
-	pllrate = readl(PM_PLLDDRSTATUS);
-
-	/* lookup pddr_table */
-	clk_ddr_clk.rate = 0;
-	for (i = 0; i < ARRAY_SIZE(pddr_table); i++) {
-		if (pllrate == pddr_table[i].prate) {
-			clk_ddr_clk.rate = pddr_table[i].drate;
-			break;
-		}
-	}
-
-	pllrate = readl(PM_PLLVGASTATUS);
-
-	/* lookup pvga_table */
-	clk_vga_clk.rate = 0;
-	for (i = 0; i < ARRAY_SIZE(pllrate_table); i++) {
-		if (pllrate == pllrate_table[i].prate) {
-			clk_vga_clk.rate = pllrate_table[i].rate;
-			break;
-		}
-	}
-
-	if (clk_vga_clk.rate)
-		clk_vga_clk.rate = clk_vga_clk.rate /
-			(((divstatus & 0x00f00000) >> 20) + 1);
-
-	clk_register(&clk_vga_clk);
-#endif
-#ifdef CONFIG_ARCH_FPGA
-	clk_ddr_clk.rate = 33000000;
-	clk_mclk_clk.rate = 33000000;
-	clk_bclk32_clk.rate = 33000000;
-#endif
-	clk_register(&clk_ddr_clk);
-	clk_register(&clk_mclk_clk);
-	clk_register(&clk_bclk32_clk);
-	clk_register(&clk_ost_clk);
-	return 0;
-}
-core_initcall(clk_init);
diff --git a/arch/unicore32/kernel/debug-macro.S b/arch/unicore32/kernel/debug-macro.S
deleted file mode 100644
index 7e2da0de4f71..000000000000
--- a/arch/unicore32/kernel/debug-macro.S
+++ /dev/null
@@ -1,86 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/kernel/debug-macro.S
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- *
- * Debugging macro include header
- */
-#include <generated/asm-offsets.h>
-#include <mach/hardware.h>
-
-		.macro	put_word_ocd, rd, rx=r16
-1001:		movc		\rx, p1.c0, #0
-		cand.a	\rx, #2
-		bne	1001b
-		movc		p1.c1, \rd, #1
-		.endm
-
-#ifdef CONFIG_DEBUG_OCD
-		/* debug using UniCore On-Chip-Debugger */
-		.macro	addruart, rx
-		.endm
-
-		.macro	senduart, rd, rx
-		put_word_ocd	\rd, \rx
-		.endm
-
-		.macro	busyuart, rd, rx
-		.endm
-
-		.macro	waituart, rd, rx
-		.endm
-#else
-#define UART_CLK_DEFAULT        3686400 * 20
-	/* Uartclk = MCLK/ 2, The MCLK on my board is 3686400 * 40  */
-#define BAUD_RATE_DEFAULT	115200
-	/* The baud rate of the serial port */
-
-#define UART_DIVISOR_DEFAULT	(UART_CLK_DEFAULT \
-				/ (16 * BAUD_RATE_DEFAULT) - 1)
-
-		.macro	addruart,rx
-		mrc	p0, #0, \rx, c1, c0
-		tst	\rx, #1			@ MMU enabled?
-		moveq	\rx, #0xee000000	@ physical base address
-		movne	\rx, #0x6e000000	@ virtual address
-
-		@ We probe for the active serial port here
-		@ However, now we assume UART0 is active:	epip4d
-		@ We assume r1 and r2 can be clobbered.
-
-		movl 	r2, #UART_DIVISOR_DEFAULT
-		mov 	r1, #0x80
-		str	r1, [\rx, #UART_LCR_OFFSET]
-		and	r1, r2, #0xff00
-		mov	r1, r1, lsr #8
-		str	r1, [\rx, #UART_DLH_OFFSET]
-		and	r1, r2, #0xff
-		str	r1, [\rx, #UART_DLL_OFFSET]
-		mov 	r1, #0x7
-		str	r1, [\rx, #UART_FCR_OFFSET]
-		mov 	r1, #0x3
-		str	r1, [\rx, #UART_LCR_OFFSET]
-		mov 	r1, #0x0
-		str	r1, [\rx, #UART_IER_OFFSET]
-		.endm
-
-		.macro	senduart,rd,rx
-		str	\rd, [\rx, #UART_THR_OFFSET]
-		.endm
-
-		.macro	waituart,rd,rx
-1001:		ldr	\rd, [\rx, #UART_LSR_OFFSET]
-		tst	\rd, #UART_LSR_THRE
-		beq	1001b
-		.endm
-
-		.macro	busyuart,rd,rx
-1001:		ldr	\rd, [\rx, #UART_LSR_OFFSET]
-		tst	\rd, #UART_LSR_TEMT
-		bne	1001b
-		.endm
-#endif
-
diff --git a/arch/unicore32/kernel/debug.S b/arch/unicore32/kernel/debug.S
deleted file mode 100644
index 13bc8c8550e4..000000000000
--- a/arch/unicore32/kernel/debug.S
+++ /dev/null
@@ -1,82 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/kernel/debug.S
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- *
- *  32-bit debugging code
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-		.text
-
-/*
- * Some debugging routines (useful if you've got MM problems and
- * printk isn't working).  For DEBUGGING ONLY!!!  Do not leave
- * references to these in a production kernel!
- */
-#include "debug-macro.S"
-
-/*
- * Useful debugging routines
- */
-ENTRY(printhex8)
-		mov	r1, #8
-		b	printhex
-ENDPROC(printhex8)
-
-ENTRY(printhex4)
-		mov	r1, #4
-		b	printhex
-ENDPROC(printhex4)
-
-ENTRY(printhex2)
-		mov	r1, #2
-printhex:	adr	r2, hexbuf
-		add	r3, r2, r1
-		mov	r1, #0
-		stb	r1, [r3]
-1:		and	r1, r0, #15
-		mov	r0, r0 >> #4
-		csub.a	r1, #10
-		beg	2f
-		add	r1, r1, #'0' - 'a' + 10
-2:		add	r1, r1, #'a' - 10
-		stb.w	r1, [r3+], #-1
-		cxor.a	r3, r2
-		bne	1b
-		mov	r0, r2
-		b	printascii
-ENDPROC(printhex2)
-
-		.ltorg
-
-ENTRY(printascii)
-		addruart r3
-		b	2f
-1:		waituart r2, r3
-		senduart r1, r3
-		busyuart r2, r3
-		cxor.a	r1, #'\n'
-		cmoveq	r1, #'\r'
-		beq	1b
-2:		cxor.a	r0, #0
-		beq	3f
-		ldb.w	r1, [r0]+, #1
-		cxor.a	r1, #0
-		bne	1b
-3:		mov	pc, lr
-ENDPROC(printascii)
-
-ENTRY(printch)
-		addruart r3
-		mov	r1, r0
-		mov	r0, #0
-		b	1b
-ENDPROC(printch)
-
-hexbuf:		.space 16
-
diff --git a/arch/unicore32/kernel/dma.c b/arch/unicore32/kernel/dma.c
deleted file mode 100644
index 7a0e2d4d6077..000000000000
--- a/arch/unicore32/kernel/dma.c
+++ /dev/null
@@ -1,179 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/dma.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- *	Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
- *	Copyright (C) 2001-2010 Guan Xuetao
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/errno.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <mach/dma.h>
-
-struct dma_channel {
-	char *name;
-	puv3_dma_prio prio;
-	void (*irq_handler)(int, void *);
-	void (*err_handler)(int, void *);
-	void *data;
-};
-
-static struct dma_channel dma_channels[MAX_DMA_CHANNELS];
-
-int puv3_request_dma(char *name, puv3_dma_prio prio,
-			 void (*irq_handler)(int, void *),
-			 void (*err_handler)(int, void *),
-			 void *data)
-{
-	unsigned long flags;
-	int i, found = 0;
-
-	/* basic sanity checks */
-	if (!name)
-		return -EINVAL;
-
-	local_irq_save(flags);
-
-	do {
-		/* try grabbing a DMA channel with the requested priority */
-		for (i = 0; i < MAX_DMA_CHANNELS; i++) {
-			if ((dma_channels[i].prio == prio) &&
-			    !dma_channels[i].name) {
-				found = 1;
-				break;
-			}
-		}
-		/* if requested prio group is full, try a hier priority */
-	} while (!found && prio--);
-
-	if (found) {
-		dma_channels[i].name = name;
-		dma_channels[i].irq_handler = irq_handler;
-		dma_channels[i].err_handler = err_handler;
-		dma_channels[i].data = data;
-	} else {
-		printk(KERN_WARNING "No more available DMA channels for %s\n",
-				name);
-		i = -ENODEV;
-	}
-
-	local_irq_restore(flags);
-	return i;
-}
-EXPORT_SYMBOL(puv3_request_dma);
-
-void puv3_free_dma(int dma_ch)
-{
-	unsigned long flags;
-
-	if (!dma_channels[dma_ch].name) {
-		printk(KERN_CRIT
-			"%s: trying to free channel %d which is already freed\n",
-			__func__, dma_ch);
-		return;
-	}
-
-	local_irq_save(flags);
-	dma_channels[dma_ch].name = NULL;
-	dma_channels[dma_ch].err_handler = NULL;
-	local_irq_restore(flags);
-}
-EXPORT_SYMBOL(puv3_free_dma);
-
-static irqreturn_t dma_irq_handler(int irq, void *dev_id)
-{
-	int i, dint;
-
-	dint = readl(DMAC_ITCSR);
-	for (i = 0; i < MAX_DMA_CHANNELS; i++) {
-		if (dint & DMAC_CHANNEL(i)) {
-			struct dma_channel *channel = &dma_channels[i];
-
-			/* Clear TC interrupt of channel i */
-			writel(DMAC_CHANNEL(i), DMAC_ITCCR);
-			writel(0, DMAC_ITCCR);
-
-			if (channel->name && channel->irq_handler) {
-				channel->irq_handler(i, channel->data);
-			} else {
-				/*
-				 * IRQ for an unregistered DMA channel:
-				 * let's clear the interrupts and disable it.
-				 */
-				printk(KERN_WARNING "spurious IRQ for"
-						" DMA channel %d\n", i);
-			}
-		}
-	}
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t dma_err_handler(int irq, void *dev_id)
-{
-	int i, dint;
-
-	dint = readl(DMAC_IESR);
-	for (i = 0; i < MAX_DMA_CHANNELS; i++) {
-		if (dint & DMAC_CHANNEL(i)) {
-			struct dma_channel *channel = &dma_channels[i];
-
-			/* Clear Err interrupt of channel i */
-			writel(DMAC_CHANNEL(i), DMAC_IECR);
-			writel(0, DMAC_IECR);
-
-			if (channel->name && channel->err_handler) {
-				channel->err_handler(i, channel->data);
-			} else {
-				/*
-				 * IRQ for an unregistered DMA channel:
-				 * let's clear the interrupts and disable it.
-				 */
-				printk(KERN_WARNING "spurious IRQ for"
-						" DMA channel %d\n", i);
-			}
-		}
-	}
-	return IRQ_HANDLED;
-}
-
-int __init puv3_init_dma(void)
-{
-	int i, ret;
-
-	/* dma channel priorities on v8 processors:
-	 * ch 0 - 1  <--> (0) DMA_PRIO_HIGH
-	 * ch 2 - 3  <--> (1) DMA_PRIO_MEDIUM
-	 * ch 4 - 5  <--> (2) DMA_PRIO_LOW
-	 */
-	for (i = 0; i < MAX_DMA_CHANNELS; i++) {
-		puv3_stop_dma(i);
-		dma_channels[i].name = NULL;
-		dma_channels[i].prio = min((i & 0x7) >> 1, DMA_PRIO_LOW);
-	}
-
-	ret = request_irq(IRQ_DMA, dma_irq_handler, 0, "DMA", NULL);
-	if (ret) {
-		printk(KERN_CRIT "Can't register IRQ for DMA\n");
-		return ret;
-	}
-
-	ret = request_irq(IRQ_DMAERR, dma_err_handler, 0, "DMAERR", NULL);
-	if (ret) {
-		printk(KERN_CRIT "Can't register IRQ for DMAERR\n");
-		free_irq(IRQ_DMA, "DMA");
-		return ret;
-	}
-
-	return 0;
-}
-
-postcore_initcall(puv3_init_dma);
diff --git a/arch/unicore32/kernel/early_printk.c b/arch/unicore32/kernel/early_printk.c
deleted file mode 100644
index c00b6712b8f7..000000000000
--- a/arch/unicore32/kernel/early_printk.c
+++ /dev/null
@@ -1,46 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/early_printk.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/console.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <mach/ocd.h>
-
-/* On-Chip-Debugger functions */
-
-static void early_ocd_write(struct console *con, const char *s, unsigned n)
-{
-	while (*s && n-- > 0) {
-		if (*s == '\n')
-			ocd_putc((int)'\r');
-		ocd_putc((int)*s);
-		s++;
-	}
-}
-
-static struct console early_ocd_console = {
-	.name =		"earlyocd",
-	.write =	early_ocd_write,
-	.flags =	CON_PRINTBUFFER,
-	.index =	-1,
-};
-
-static int __init setup_early_printk(char *buf)
-{
-	if (!buf || early_console)
-		return 0;
-
-	early_console = &early_ocd_console;
-	if (strstr(buf, "keep"))
-		early_console->flags &= ~CON_BOOT;
-	else
-		early_console->flags |= CON_BOOT;
-	register_console(early_console);
-	return 0;
-}
-early_param("earlyprintk", setup_early_printk);
diff --git a/arch/unicore32/kernel/elf.c b/arch/unicore32/kernel/elf.c
deleted file mode 100644
index 22adc65a03e9..000000000000
--- a/arch/unicore32/kernel/elf.c
+++ /dev/null
@@ -1,35 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/elf.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/personality.h>
-#include <linux/binfmts.h>
-#include <linux/elf.h>
-
-int elf_check_arch(const struct elf32_hdr *x)
-{
-	/* Make sure it's an UniCore executable */
-	if (x->e_machine != EM_UNICORE)
-		return 0;
-
-	/* Make sure the entry address is reasonable */
-	if (x->e_entry & 3)
-		return 0;
-
-	return 1;
-}
-EXPORT_SYMBOL(elf_check_arch);
-
-void elf_set_personality(const struct elf32_hdr *x)
-{
-	unsigned int personality = PER_LINUX;
-
-	set_personality(personality);
-}
-EXPORT_SYMBOL(elf_set_personality);
diff --git a/arch/unicore32/kernel/entry.S b/arch/unicore32/kernel/entry.S
deleted file mode 100644
index b35dc83069cb..000000000000
--- a/arch/unicore32/kernel/entry.S
+++ /dev/null
@@ -1,802 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/kernel/entry.S
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- *
- *  Low-level vector interface routines
- */
-#include <linux/init.h>
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <asm/errno.h>
-#include <asm/thread_info.h>
-#include <asm/memory.h>
-#include <asm/unistd.h>
-#include <generated/asm-offsets.h>
-#include "debug-macro.S"
-
-@
-@ Most of the stack format comes from struct pt_regs, but with
-@ the addition of 8 bytes for storing syscall args 5 and 6.
-@
-#define S_OFF		8
-
-/*
- * The SWI code relies on the fact that R0 is at the bottom of the stack
- * (due to slow/fast restore user regs).
- */
-#if S_R0 != 0
-#error "Please fix"
-#endif
-
-	.macro	zero_fp
-#ifdef CONFIG_FRAME_POINTER
-	mov	fp, #0
-#endif
-	.endm
-
-	.macro	alignment_trap, rtemp
-#ifdef CONFIG_ALIGNMENT_TRAP
-	ldw	\rtemp, .LCcralign
-	ldw	\rtemp, [\rtemp]
-	movc	p0.c1, \rtemp, #0
-#endif
-	.endm
-
-	.macro	load_user_sp_lr, rd, rtemp, offset = 0
-	mov	\rtemp, asr
-	xor	\rtemp, \rtemp, #(PRIV_MODE ^ SUSR_MODE)
-	mov.a	asr, \rtemp			@ switch to the SUSR mode
-
-	ldw	sp, [\rd+], #\offset		@ load sp_user
-	ldw	lr, [\rd+], #\offset + 4	@ load lr_user
-
-	xor	\rtemp, \rtemp, #(PRIV_MODE ^ SUSR_MODE)
-	mov.a	asr, \rtemp			@ switch back to the PRIV mode
-	.endm
-
-	.macro	priv_exit, rpsr
-	mov.a	bsr, \rpsr
-	ldm.w	(r0 - r15), [sp]+
-	ldm.b	(r16 - pc), [sp]+		@ load r0 - pc, asr
-	.endm
-
-	.macro	restore_user_regs, fast = 0, offset = 0
-	ldw	r1, [sp+], #\offset + S_PSR	@ get calling asr
-	ldw	lr, [sp+], #\offset + S_PC	@ get pc
-	mov.a	bsr, r1				@ save in bsr_priv
-	.if	\fast
-	add	sp, sp, #\offset + S_R1		@ r0 is syscall return value
-	ldm.w	(r1 - r15), [sp]+		@ get calling r1 - r15
-	ldur	(r16 - lr), [sp]+		@ get calling r16 - lr
-	.else
-	ldm.w	(r0 - r15), [sp]+		@ get calling r0 - r15
-	ldur	(r16 - lr), [sp]+		@ get calling r16 - lr
-	.endif
-	nop
-	add	sp, sp, #S_FRAME_SIZE - S_R16
-	mov.a	pc, lr				@ return
-						@ and move bsr_priv into asr
-	.endm
-
-	.macro	get_thread_info, rd
-	mov	\rd, sp >> #13
-	mov	\rd, \rd << #13
-	.endm
-
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-	ldw	\base, =(PKUNITY_INTC_BASE)
-	ldw	\irqstat, [\base+], #0xC	@ INTC_ICIP
-	ldw	\tmp,	  [\base+], #0x4	@ INTC_ICMR
-	and.a	\irqstat, \irqstat, \tmp
-	beq	1001f
-	cntlz	\irqnr, \irqstat
-	rsub	\irqnr, \irqnr, #31
-1001:	/* EQ will be set if no irqs pending */
-	.endm
-
-#ifdef CONFIG_DEBUG_LL
-	.macro	printreg, reg, temp
-		adr	\temp, 901f
-		stm	(r0-r3), [\temp]+
-		stw	lr, [\temp+], #0x10
-		mov	r0, \reg
-		b.l	printhex8
-		mov	r0, #':'
-		b.l	printch
-		mov	r0, pc
-		b.l	printhex8
-		adr	r0, 902f
-		b.l	printascii
-		adr	\temp, 901f
-		ldm	(r0-r3), [\temp]+
-		ldw	lr, [\temp+], #0x10
-		b	903f
-901:	.word	0, 0, 0, 0, 0	@ r0-r3, lr
-902:	.asciz	": epip4d\n"
-	.align
-903:
-	.endm
-#endif
-
-/*
- * These are the registers used in the syscall handler, and allow us to
- * have in theory up to 7 arguments to a function - r0 to r6.
- *
- * Note that tbl == why is intentional.
- *
- * We must set at least "tsk" and "why" when calling ret_with_reschedule.
- */
-scno	.req	r21		@ syscall number
-tbl	.req	r22		@ syscall table pointer
-why	.req	r22		@ Linux syscall (!= 0)
-tsk	.req	r23		@ current thread_info
-
-/*
- * Interrupt handling.  Preserves r17, r18, r19
- */
-	.macro	intr_handler
-1:	get_irqnr_and_base r0, r6, r5, lr
-	beq	2f
-	mov	r1, sp
-	@
-	@ routine called with r0 = irq number, r1 = struct pt_regs *
-	@
-	adr	lr, 1b
-	b	asm_do_IRQ
-2:
-	.endm
-
-/*
- * PRIV mode handlers
- */
-	.macro	priv_entry
-	sub	sp, sp, #(S_FRAME_SIZE - 4)
-	stm	(r1 - r15), [sp]+
-	add	r5, sp, #S_R15
-	stm	(r16 - r28), [r5]+
-
-	ldm	(r1 - r3), [r0]+
-	add	r5, sp, #S_SP - 4	@ here for interlock avoidance
-	mov	r4, #-1			@  ""  ""      ""       ""
-	add	r0, sp, #(S_FRAME_SIZE - 4)
-	stw.w	r1, [sp+], #-4		@ save the "real" r0 copied
-					@ from the exception stack
-
-	mov	r1, lr
-
-	@
-	@ We are now ready to fill in the remaining blanks on the stack:
-	@
-	@  r0 - sp_priv
-	@  r1 - lr_priv
-	@  r2 - lr_<exception>, already fixed up for correct return/restart
-	@  r3 - bsr_<exception>
-	@  r4 - orig_r0 (see pt_regs definition in ptrace.h)
-	@
-	stm	(r0 - r4), [r5]+
-	.endm
-
-/*
- * User mode handlers
- *
- */
-	.macro	user_entry
-	sub	sp, sp, #S_FRAME_SIZE
-	stm	(r1 - r15), [sp+]
-	add	r4, sp, #S_R16
-	stm	(r16 - r28), [r4]+
-
-	ldm	(r1 - r3), [r0]+
-	add	r0, sp, #S_PC		@ here for interlock avoidance
-	mov	r4, #-1			@  ""  ""     ""        ""
-
-	stw	r1, [sp]		@ save the "real" r0 copied
-					@ from the exception stack
-
-	@
-	@ We are now ready to fill in the remaining blanks on the stack:
-	@
-	@  r2 - lr_<exception>, already fixed up for correct return/restart
-	@  r3 - bsr_<exception>
-	@  r4 - orig_r0 (see pt_regs definition in ptrace.h)
-	@
-	@ Also, separately save sp_user and lr_user
-	@
-	stm	(r2 - r4), [r0]+
-	stur	(sp, lr), [r0-]
-
-	@
-	@ Enable the alignment trap while in kernel mode
-	@
-	alignment_trap r0
-
-	@
-	@ Clear FP to mark the first stack frame
-	@
-	zero_fp
-	.endm
-
-	.text
-
-@
-@ __invalid - generic code for failed exception
-@			(re-entrant version of handlers)
-@
-__invalid:
-	sub	sp, sp, #S_FRAME_SIZE
-	stm	(r1 - r15), [sp+]
-	add	r1, sp, #S_R16
-	stm	(r16 - r28, sp, lr), [r1]+
-
-	zero_fp
-
-	ldm	(r4 - r6), [r0]+
-	add	r0, sp, #S_PC		@ here for interlock avoidance
-	mov	r7, #-1			@  ""   ""    ""        ""
-	stw	r4, [sp]		@ save preserved r0
-	stm	(r5 - r7), [r0]+	@ lr_<exception>,
-					@ asr_<exception>, "old_r0"
-
-	mov	r0, sp
-	mov	r1, asr
-	b	bad_mode
-ENDPROC(__invalid)
-
-	.align	5
-__dabt_priv:
-	priv_entry
-
-	@
-	@ get ready to re-enable interrupts if appropriate
-	@
-	mov	r17, asr
-	cand.a	r3, #PSR_I_BIT
-	bne	1f
-	andn	r17, r17, #PSR_I_BIT
-1:
-
-	@
-	@ Call the processor-specific abort handler:
-	@
-	@  r2 - aborted context pc
-	@  r3 - aborted context asr
-	@
-	@ The abort handler must return the aborted address in r0, and
-	@ the fault status register in r1.
-	@
-	movc	r1, p0.c3, #0		@ get FSR
-	movc	r0, p0.c4, #0		@ get FAR
-
-	@
-	@ set desired INTR state, then call main handler
-	@
-	mov.a	asr, r17
-	mov	r2, sp
-	b.l	do_DataAbort
-
-	@
-	@ INTRs off again before pulling preserved data off the stack
-	@
-	disable_irq r0
-
-	@
-	@ restore BSR and restart the instruction
-	@
-	ldw	r2, [sp+], #S_PSR
-	priv_exit r2				@ return from exception
-ENDPROC(__dabt_priv)
-
-	.align	5
-__intr_priv:
-	priv_entry
-
-	intr_handler
-
-	mov	r0, #0				@ epip4d
-	movc	p0.c5, r0, #14
-	nop; nop; nop; nop; nop; nop; nop; nop
-
-	ldw	r4, [sp+], #S_PSR		@ irqs are already disabled
-
-	priv_exit r4				@ return from exception
-ENDPROC(__intr_priv)
-
-	.ltorg
-
-	.align	5
-__extn_priv:
-	priv_entry
-
-	mov	r0, sp				@ struct pt_regs *regs
-	mov	r1, asr
-	b	bad_mode			@ not supported
-ENDPROC(__extn_priv)
-
-	.align	5
-__pabt_priv:
-	priv_entry
-
-	@
-	@ re-enable interrupts if appropriate
-	@
-	mov	r17, asr
-	cand.a	r3, #PSR_I_BIT
-	bne	1f
-	andn	r17, r17, #PSR_I_BIT
-1:
-
-	@
-	@ set args, then call main handler
-	@
-	@  r0 - address of faulting instruction
-	@  r1 - pointer to registers on stack
-	@
-	mov	r0, r2			@ pass address of aborted instruction
-	mov	r1, #5
-	mov.a	asr, r17
-	mov	r2, sp			@ regs
-	b.l	do_PrefetchAbort	@ call abort handler
-
-	@
-	@ INTRs off again before pulling preserved data off the stack
-	@
-	disable_irq r0
-
-	@
-	@ restore BSR and restart the instruction
-	@
-	ldw	r2, [sp+], #S_PSR
-	priv_exit r2			@ return from exception
-ENDPROC(__pabt_priv)
-
-	.align	5
-.LCcralign:
-	.word	cr_alignment
-
-	.align	5
-__dabt_user:
-	user_entry
-
-#ifdef CONFIG_UNICORE_FPU_F64
-	cff	ip, s31
-	cand.a	ip, #0x08000000		@ FPU execption traps?
-	beq	209f
-
-	ldw	ip, [sp+], #S_PC
-	add	ip, ip, #4
-	stw	ip, [sp+], #S_PC
-	@
-	@ fall through to the emulation code, which returns using r19 if
-	@ it has emulated the instruction, or the more conventional lr
-	@ if we are to treat this as a real extended instruction
-	@
-	@  r0 - instruction
-	@
-1:	ldw.u	r0, [r2]
-	adr	r19, ret_from_exception
-	adr	lr, 209f
-	@
-	@ fallthrough to call do_uc_f64
-	@
-/*
- * Check whether the instruction is a co-processor instruction.
- * If yes, we need to call the relevant co-processor handler.
- *
- * Note that we don't do a full check here for the co-processor
- * instructions; all instructions with bit 27 set are well
- * defined.  The only instructions that should fault are the
- * co-processor instructions.
- *
- * Emulators may wish to make use of the following registers:
- *  r0  = instruction opcode.
- *  r2  = PC
- *  r19 = normal "successful" return address
- *  r20 = this threads thread_info structure.
- *  lr  = unrecognised instruction return address
- */
-	get_thread_info r20			@ get current thread
-	and	r8, r0, #0x00003c00		@ mask out CP number
-	mov	r7, #1
-	stb	r7, [r20+], #TI_USED_CP + 2	@ set appropriate used_cp[]
-
-	@ F64 hardware support entry point.
-	@  r0  = faulted instruction
-	@  r19 = return address
-	@  r20 = fp_state
-	enable_irq r4
-	add	r20, r20, #TI_FPSTATE	@ r20 = workspace
-	cff	r1, s31			@ get fpu FPSCR
-	andn    r2, r1, #0x08000000
-	ctf     r2, s31			@ clear 27 bit
-	mov	r2, sp			@ nothing stacked - regdump is at TOS
-	mov	lr, r19			@ setup for a return to the user code
-
-	@ Now call the C code to package up the bounce to the support code
-	@   r0 holds the trigger instruction
-	@   r1 holds the FPSCR value
-	@   r2 pointer to register dump
-	b	ucf64_exchandler
-209:
-#endif
-	@
-	@ Call the processor-specific abort handler:
-	@
-	@  r2 - aborted context pc
-	@  r3 - aborted context asr
-	@
-	@ The abort handler must return the aborted address in r0, and
-	@ the fault status register in r1.
-	@
-	movc	r1, p0.c3, #0		@ get FSR
-	movc	r0, p0.c4, #0		@ get FAR
-
-	@
-	@ INTRs on, then call the main handler
-	@
-	enable_irq r2
-	mov	r2, sp
-	adr	lr, ret_from_exception
-	b	do_DataAbort
-ENDPROC(__dabt_user)
-
-	.align	5
-__intr_user:
-	user_entry
-
-	get_thread_info tsk
-
-	intr_handler
-
-	mov	why, #0
-	b	ret_to_user
-ENDPROC(__intr_user)
-
-	.ltorg
-
-	.align	5
-__extn_user:
-	user_entry
-
-	mov	r0, sp
-	mov	r1, asr
-	b	bad_mode
-ENDPROC(__extn_user)
-
-	.align	5
-__pabt_user:
-	user_entry
-
-	mov	r0, r2			@ pass address of aborted instruction.
-	mov	r1, #5
-	enable_irq r1			@ Enable interrupts
-	mov	r2, sp			@ regs
-	b.l	do_PrefetchAbort	@ call abort handler
-	/* fall through */
-/*
- * This is the return code to user mode for abort handlers
- */
-ENTRY(ret_from_exception)
-	get_thread_info tsk
-	mov	why, #0
-	b	ret_to_user
-ENDPROC(__pabt_user)
-ENDPROC(ret_from_exception)
-
-/*
- * Register switch for UniCore V2 processors
- * r0 = previous task_struct, r1 = previous thread_info, r2 = next thread_info
- * previous and next are guaranteed not to be the same.
- */
-ENTRY(__switch_to)
-	add	ip, r1, #TI_CPU_SAVE
-	stm.w	(r4 - r15), [ip]+
-	stm.w	(r16 - r27, sp, lr), [ip]+
-
-#ifdef	CONFIG_UNICORE_FPU_F64
-	add	ip, r1, #TI_FPSTATE
-	sfm.w	(f0  - f7 ), [ip]+
-	sfm.w	(f8  - f15), [ip]+
-	sfm.w	(f16 - f23), [ip]+
-	sfm.w	(f24 - f31), [ip]+
-	cff	r4, s31
-	stw	r4, [ip]
-
-	add	ip, r2, #TI_FPSTATE
-	lfm.w	(f0  - f7 ), [ip]+
-	lfm.w	(f8  - f15), [ip]+
-	lfm.w	(f16 - f23), [ip]+
-	lfm.w	(f24 - f31), [ip]+
-	ldw	r4, [ip]
-	ctf	r4, s31
-#endif
-	add	ip, r2, #TI_CPU_SAVE
-	ldm.w	(r4 - r15), [ip]+
-	ldm	(r16 - r27, sp, pc), [ip]+	@ Load all regs saved previously
-ENDPROC(__switch_to)
-
-	.align	5
-/*
- * This is the fast syscall return path.  We do as little as
- * possible here, and this includes saving r0 back into the PRIV
- * stack.
- */
-ret_fast_syscall:
-	disable_irq r1				@ disable interrupts
-	ldw	r1, [tsk+], #TI_FLAGS
-	cand.a	r1, #_TIF_WORK_MASK
-	bne	fast_work_pending
-
-	@ fast_restore_user_regs
-	restore_user_regs fast = 1, offset = S_OFF
-
-/*
- * Ok, we need to do extra processing, enter the slow path.
- */
-fast_work_pending:
-	stw.w	r0, [sp+], #S_R0+S_OFF		@ returned r0
-work_pending:
-	cand.a	r1, #_TIF_NEED_RESCHED
-	bne	work_resched
-	mov	r0, sp				@ 'regs'
-	mov	r2, why				@ 'syscall'
-	cand.a	r1, #_TIF_SIGPENDING		@ delivering a signal?
-	cmovne	why, #0				@ prevent further restarts
-	b.l	do_notify_resume
-	b	ret_slow_syscall		@ Check work again
-
-work_resched:
-	b.l	schedule
-/*
- * "slow" syscall return path.  "why" tells us if this was a real syscall.
- */
-ENTRY(ret_to_user)
-ret_slow_syscall:
-	disable_irq r1				@ disable interrupts
-	get_thread_info tsk			@ epip4d, one path error?!
-	ldw	r1, [tsk+], #TI_FLAGS
-	cand.a	r1, #_TIF_WORK_MASK
-	bne	work_pending
-no_work_pending:
-	@ slow_restore_user_regs
-	restore_user_regs fast = 0, offset = 0
-ENDPROC(ret_to_user)
-
-/*
- * This is how we return from a fork.
- */
-ENTRY(ret_from_fork)
-	b.l	schedule_tail
-	b	ret_slow_syscall
-ENDPROC(ret_from_fork)
-
-ENTRY(ret_from_kernel_thread)
-	b.l	schedule_tail
-	mov	r0, r5
-	adr	lr, ret_slow_syscall
-	mov	pc, r4
-ENDPROC(ret_from_kernel_thread)
-
-/*=============================================================================
- * SWI handler
- *-----------------------------------------------------------------------------
- */
-	.align	5
-ENTRY(vector_swi)
-	sub	sp, sp, #S_FRAME_SIZE
-	stm	(r0 - r15), [sp]+		@ Calling r0 - r15
-	add	r8, sp, #S_R16
-	stm	(r16 - r28), [r8]+		@ Calling r16 - r28
-	add	r8, sp, #S_PC
-	stur	(sp, lr), [r8-]			@ Calling sp, lr
-	mov	r8, bsr				@ called from non-REAL mode
-	stw	lr, [sp+], #S_PC		@ Save calling PC
-	stw	r8, [sp+], #S_PSR		@ Save ASR
-	stw	r0, [sp+], #S_OLD_R0		@ Save OLD_R0
-	zero_fp
-
-	/*
-	 * Get the system call number.
-	 */
-	sub	ip, lr, #4
-	ldw.u	scno, [ip]			@ get SWI instruction
-
-#ifdef CONFIG_ALIGNMENT_TRAP
-	ldw	ip, __cr_alignment
-	ldw	ip, [ip]
-	movc	p0.c1, ip, #0                   @ update control register
-#endif
-	enable_irq ip
-
-	get_thread_info tsk
-	ldw	tbl, =sys_call_table		@ load syscall table pointer
-
-	andn	scno, scno, #0xff000000		@ mask off SWI op-code
-	andn	scno, scno, #0x00ff0000		@ mask off SWI op-code
-
-	stm.w	(r4, r5), [sp-]			@ push fifth and sixth args
-	ldw	ip, [tsk+], #TI_FLAGS		@ check for syscall tracing
-	cand.a	ip, #_TIF_SYSCALL_TRACE		@ are we tracing syscalls?
-	bne	__sys_trace
-
-	csub.a	scno, #__NR_syscalls		@ check upper syscall limit
-	adr	lr, ret_fast_syscall		@ return address
-	bea	1f
-	ldw	pc, [tbl+], scno << #2		@ call sys_* routine
-1:
-	add	r1, sp, #S_OFF
-2:	mov	why, #0				@ no longer a real syscall
-	b	sys_ni_syscall			@ not private func
-
-	/*
-	 * This is the really slow path.  We're going to be doing
-	 * context switches, and waiting for our parent to respond.
-	 */
-__sys_trace:
-	mov	r2, scno
-	add	r1, sp, #S_OFF
-	mov	r0, #0				@ trace entry [IP = 0]
-	b.l	syscall_trace
-
-	adr	lr, __sys_trace_return		@ return address
-	mov	scno, r0			@ syscall number (possibly new)
-	add	r1, sp, #S_R0 + S_OFF		@ pointer to regs
-	csub.a	scno, #__NR_syscalls		@ check upper syscall limit
-	bea	2b
-	ldm	(r0 - r3), [r1]+		@ have to reload r0 - r3
-	ldw	pc, [tbl+], scno << #2		@ call sys_* routine
-
-__sys_trace_return:
-	stw.w	r0, [sp+], #S_R0 + S_OFF	@ save returned r0
-	mov	r2, scno
-	mov	r1, sp
-	mov	r0, #1				@ trace exit [IP = 1]
-	b.l	syscall_trace
-	b	ret_slow_syscall
-
-	.align	5
-#ifdef CONFIG_ALIGNMENT_TRAP
-	.type	__cr_alignment, #object
-__cr_alignment:
-	.word	cr_alignment
-#endif
-	.ltorg
-
-ENTRY(sys_rt_sigreturn)
-		add	r0, sp, #S_OFF
-		mov	why, #0		@ prevent syscall restart handling
-		b	__sys_rt_sigreturn
-ENDPROC(sys_rt_sigreturn)
-
-	__INIT
-
-/*
- * Vector stubs.
- *
- * This code is copied to 0xffff0200 so we can use branches in the
- * vectors, rather than ldr's.  Note that this code must not
- * exceed 0x300 bytes.
- *
- * Common stub entry macro:
- *   Enter in INTR mode, bsr = PRIV/USER ASR, lr = PRIV/USER PC
- *
- * SP points to a minimal amount of processor-private memory, the address
- * of which is copied into r0 for the mode specific abort handler.
- */
-	.macro	vector_stub, name, mode
-	.align	5
-
-vector_\name:
-	@
-	@ Save r0, lr_<exception> (parent PC) and bsr_<exception>
-	@ (parent ASR)
-	@
-	stw	r0, [sp]
-	stw	lr, [sp+], #4		@ save r0, lr
-	mov	lr, bsr
-	stw	lr, [sp+], #8		@ save bsr
-
-	@
-	@ Prepare for PRIV mode.  INTRs remain disabled.
-	@
-	mov	r0, asr
-	xor	r0, r0, #(\mode ^ PRIV_MODE)
-	mov.a	bsr, r0
-
-	@
-	@ the branch table must immediately follow this code
-	@
-	and	lr, lr, #0x03
-	add	lr, lr, #1
-	mov	r0, sp
-	ldw	lr, [pc+], lr << #2
-	mov.a	pc, lr			@ branch to handler in PRIV mode
-ENDPROC(vector_\name)
-	.align	2
-	@ handler addresses follow this label
-	.endm
-
-	.globl	__stubs_start
-__stubs_start:
-/*
- * Interrupt dispatcher
- */
-	vector_stub	intr, INTR_MODE
-
-	.long	__intr_user			@  0  (USER)
-	.long	__invalid			@  1
-	.long	__invalid			@  2
-	.long	__intr_priv			@  3  (PRIV)
-
-/*
- * Data abort dispatcher
- * Enter in ABT mode, bsr = USER ASR, lr = USER PC
- */
-	vector_stub	dabt, ABRT_MODE
-
-	.long	__dabt_user			@  0  (USER)
-	.long	__invalid			@  1
-	.long	__invalid			@  2  (INTR)
-	.long	__dabt_priv			@  3  (PRIV)
-
-/*
- * Prefetch abort dispatcher
- * Enter in ABT mode, bsr = USER ASR, lr = USER PC
- */
-	vector_stub	pabt, ABRT_MODE
-
-	.long	__pabt_user			@  0 (USER)
-	.long	__invalid			@  1
-	.long	__invalid			@  2 (INTR)
-	.long	__pabt_priv			@  3 (PRIV)
-
-/*
- * Undef instr entry dispatcher
- * Enter in EXTN mode, bsr = PRIV/USER ASR, lr = PRIV/USER PC
- */
-	vector_stub	extn, EXTN_MODE
-
-	.long	__extn_user			@  0 (USER)
-	.long	__invalid			@  1
-	.long	__invalid			@  2 (INTR)
-	.long	__extn_priv			@  3 (PRIV)
-
-/*
- * We group all the following data together to optimise
- * for CPUs with separate I & D caches.
- */
-	.align	5
-
-.LCvswi:
-	.word	vector_swi
-
-	.globl	__stubs_end
-__stubs_end:
-
-	.equ	stubs_offset, __vectors_start + 0x200 - __stubs_start
-
-	.globl	__vectors_start
-__vectors_start:
-	jepriv	SYS_ERROR0
-	b	vector_extn + stubs_offset
-	ldw	pc, .LCvswi + stubs_offset
-	b	vector_pabt + stubs_offset
-	b	vector_dabt + stubs_offset
-	jepriv	SYS_ERROR0
-	b	vector_intr + stubs_offset
-	jepriv	SYS_ERROR0
-
-	.globl	__vectors_end
-__vectors_end:
-
-	.data
-
-	.globl	cr_alignment
-	.globl	cr_no_alignment
-cr_alignment:
-	.space	4
-cr_no_alignment:
-	.space	4
diff --git a/arch/unicore32/kernel/fpu-ucf64.c b/arch/unicore32/kernel/fpu-ucf64.c
deleted file mode 100644
index 85f0af29d29b..000000000000
--- a/arch/unicore32/kernel/fpu-ucf64.c
+++ /dev/null
@@ -1,117 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/fpu-ucf64.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/signal.h>
-#include <linux/sched/signal.h>
-#include <linux/init.h>
-
-#include <asm/fpu-ucf64.h>
-
-/*
- * A special flag to tell the normalisation code not to normalise.
- */
-#define F64_NAN_FLAG	0x100
-
-/*
- * A bit pattern used to indicate the initial (unset) value of the
- * exception mask, in case nothing handles an instruction.  This
- * doesn't include the NAN flag, which get masked out before
- * we check for an error.
- */
-#define F64_EXCEPTION_ERROR	((u32)-1 & ~F64_NAN_FLAG)
-
-/*
- * Since we aren't building with -mfpu=f64, we need to code
- * these instructions using their MRC/MCR equivalents.
- */
-#define f64reg(_f64_) #_f64_
-
-#define cff(_f64_) ({			\
-	u32 __v;			\
-	asm("cff %0, " f64reg(_f64_) "@ fmrx	%0, " #_f64_	\
-	    : "=r" (__v) : : "cc");	\
-	__v;				\
-	})
-
-#define ctf(_f64_, _var_)		\
-	asm("ctf %0, " f64reg(_f64_) "@ fmxr	" #_f64_ ", %0"	\
-	   : : "r" (_var_) : "cc")
-
-/*
- * Raise a SIGFPE for the current process.
- * sicode describes the signal being raised.
- */
-void ucf64_raise_sigfpe(struct pt_regs *regs)
-{
-	/*
-	 * This is the same as NWFPE, because it's not clear what
-	 * this is used for
-	 */
-	current->thread.error_code = 0;
-	current->thread.trap_no = 6;
-
-	send_sig_fault(SIGFPE, FPE_FLTUNK,
-		       (void __user *)(instruction_pointer(regs) - 4),
-		       current);
-}
-
-/*
- * Handle exceptions of UniCore-F64.
- */
-void ucf64_exchandler(u32 inst, u32 fpexc, struct pt_regs *regs)
-{
-	u32 tmp = fpexc;
-	u32 exc = F64_EXCEPTION_ERROR & fpexc;
-
-	pr_debug("UniCore-F64: instruction %08x fpscr %08x\n",
-			inst, fpexc);
-
-	if (exc & FPSCR_CMPINSTR_BIT) {
-		if (exc & FPSCR_CON)
-			tmp |= FPSCR_CON;
-		else
-			tmp &= ~(FPSCR_CON);
-		exc &= ~(FPSCR_CMPINSTR_BIT | FPSCR_CON);
-	} else {
-		pr_debug("UniCore-F64 Error: unhandled exceptions\n");
-		pr_debug("UniCore-F64 FPSCR 0x%08x INST 0x%08x\n",
-				cff(FPSCR), inst);
-
-		ucf64_raise_sigfpe(regs);
-		return;
-	}
-
-	/*
-	 * Update the FPSCR with the additional exception flags.
-	 * Comparison instructions always return at least one of
-	 * these flags set.
-	 */
-	tmp &= ~(FPSCR_TRAP | FPSCR_IOS | FPSCR_OFS | FPSCR_UFS |
-			FPSCR_IXS | FPSCR_HIS | FPSCR_IOC | FPSCR_OFC |
-			FPSCR_UFC | FPSCR_IXC | FPSCR_HIC);
-
-	tmp |= exc;
-	ctf(FPSCR, tmp);
-}
-
-/*
- * F64 support code initialisation.
- */
-static int __init ucf64_init(void)
-{
-	ctf(FPSCR, 0x0);     /* FPSCR_UFE | FPSCR_NDE perhaps better */
-
-	printk(KERN_INFO "Enable UniCore-F64 support.\n");
-
-	return 0;
-}
-
-late_initcall(ucf64_init);
diff --git a/arch/unicore32/kernel/gpio.c b/arch/unicore32/kernel/gpio.c
deleted file mode 100644
index 36d395b54b7c..000000000000
--- a/arch/unicore32/kernel/gpio.c
+++ /dev/null
@@ -1,121 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/gpio.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- *	Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
- *	Copyright (C) 2001-2010 Guan Xuetao
- */
-/* in FPGA, no GPIO support */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/gpio/driver.h>
-/* FIXME: needed for gpio_set_value() - convert to use descriptors or hogs */
-#include <linux/gpio.h>
-#include <mach/hardware.h>
-
-#ifdef CONFIG_LEDS
-#include <linux/leds.h>
-#include <linux/platform_device.h>
-
-static const struct gpio_led puv3_gpio_leds[] = {
-	{ .name = "cpuhealth", .gpio = GPO_CPU_HEALTH, .active_low = 0,
-		.default_trigger = "heartbeat",	},
-	{ .name = "hdd_led", .gpio = GPO_HDD_LED, .active_low = 1,
-		.default_trigger = "disk-activity", },
-};
-
-static const struct gpio_led_platform_data puv3_gpio_led_data = {
-	.num_leds =	ARRAY_SIZE(puv3_gpio_leds),
-	.leds =		(void *) puv3_gpio_leds,
-};
-
-static struct platform_device puv3_gpio_gpio_leds = {
-	.name =		"leds-gpio",
-	.id =		-1,
-	.dev = {
-		.platform_data = (void *) &puv3_gpio_led_data,
-	}
-};
-
-static int __init puv3_gpio_leds_init(void)
-{
-	platform_device_register(&puv3_gpio_gpio_leds);
-	return 0;
-}
-
-device_initcall(puv3_gpio_leds_init);
-#endif
-
-static int puv3_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
-	return !!(readl(GPIO_GPLR) & GPIO_GPIO(offset));
-}
-
-static void puv3_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-{
-	if (value)
-		writel(GPIO_GPIO(offset), GPIO_GPSR);
-	else
-		writel(GPIO_GPIO(offset), GPIO_GPCR);
-}
-
-static int puv3_direction_input(struct gpio_chip *chip, unsigned offset)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	writel(readl(GPIO_GPDR) & ~GPIO_GPIO(offset), GPIO_GPDR);
-	local_irq_restore(flags);
-	return 0;
-}
-
-static int puv3_direction_output(struct gpio_chip *chip, unsigned offset,
-		int value)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	puv3_gpio_set(chip, offset, value);
-	writel(readl(GPIO_GPDR) | GPIO_GPIO(offset), GPIO_GPDR);
-	local_irq_restore(flags);
-	return 0;
-}
-
-static struct gpio_chip puv3_gpio_chip = {
-	.label			= "gpio",
-	.direction_input	= puv3_direction_input,
-	.direction_output	= puv3_direction_output,
-	.set			= puv3_gpio_set,
-	.get			= puv3_gpio_get,
-	.base			= 0,
-	.ngpio			= GPIO_MAX + 1,
-};
-
-void __init puv3_init_gpio(void)
-{
-	writel(GPIO_DIR, GPIO_GPDR);
-#if	defined(CONFIG_PUV3_NB0916) || defined(CONFIG_PUV3_SMW0919)	\
-	|| defined(CONFIG_PUV3_DB0913)
-	gpio_set_value(GPO_WIFI_EN, 1);
-	gpio_set_value(GPO_HDD_LED, 1);
-	gpio_set_value(GPO_VGA_EN, 1);
-	gpio_set_value(GPO_LCD_EN, 1);
-	gpio_set_value(GPO_CAM_PWR_EN, 0);
-	gpio_set_value(GPO_LCD_VCC_EN, 1);
-	gpio_set_value(GPO_SOFT_OFF, 1);
-	gpio_set_value(GPO_BT_EN, 1);
-	gpio_set_value(GPO_FAN_ON, 0);
-	gpio_set_value(GPO_SPKR, 0);
-	gpio_set_value(GPO_CPU_HEALTH, 1);
-	gpio_set_value(GPO_LAN_SEL, 1);
-/*
- * DO NOT modify the GPO_SET_V1 and GPO_SET_V2 in kernel
- *	gpio_set_value(GPO_SET_V1, 1);
- *	gpio_set_value(GPO_SET_V2, 1);
- */
-#endif
-	gpiochip_add_data(&puv3_gpio_chip, NULL);
-}
diff --git a/arch/unicore32/kernel/head.S b/arch/unicore32/kernel/head.S
deleted file mode 100644
index 9bbb8668f9f7..000000000000
--- a/arch/unicore32/kernel/head.S
+++ /dev/null
@@ -1,249 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/kernel/head.S
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-
-#include <asm/assembler.h>
-#include <asm/ptrace.h>
-#include <generated/asm-offsets.h>
-#include <asm/memory.h>
-#include <asm/thread_info.h>
-#include <asm/hwdef-copro.h>
-#include <asm/pgtable-hwdef.h>
-
-#if (PHYS_OFFSET & 0x003fffff)
-#error "PHYS_OFFSET must be at an even 4MiB boundary!"
-#endif
-
-#define KERNEL_RAM_VADDR	(PAGE_OFFSET + KERNEL_IMAGE_START)
-#define KERNEL_RAM_PADDR	(PHYS_OFFSET + KERNEL_IMAGE_START)
-
-#define KERNEL_PGD_PADDR	(KERNEL_RAM_PADDR - 0x1000)
-#define KERNEL_PGD_VADDR	(KERNEL_RAM_VADDR - 0x1000)
-
-#define KERNEL_START		KERNEL_RAM_VADDR
-#define KERNEL_END		_end
-
-/*
- * swapper_pg_dir is the virtual address of the initial page table.
- * We place the page tables 4K below KERNEL_RAM_VADDR.  Therefore, we must
- * make sure that KERNEL_RAM_VADDR is correctly set.  Currently, we expect
- * the least significant 16 bits to be 0x8000, but we could probably
- * relax this restriction to KERNEL_RAM_VADDR >= PAGE_OFFSET + 0x1000.
- */
-#if (KERNEL_RAM_VADDR & 0xffff) != 0x8000
-#error KERNEL_RAM_VADDR must start at 0xXXXX8000
-#endif
-
-	.globl	swapper_pg_dir
-	.equ	swapper_pg_dir, KERNEL_RAM_VADDR - 0x1000
-
-/*
- * Kernel startup entry point.
- * ---------------------------
- *
- * This is normally called from the decompressor code.  The requirements
- * are: MMU = off, D-cache = off, I-cache = dont care
- *
- * This code is mostly position independent, so if you link the kernel at
- * 0xc0008000, you call this at __pa(0xc0008000).
- */
-	__HEAD
-ENTRY(stext)
-	@ set asr
-	mov	r0, #PRIV_MODE			@ ensure priv mode
-	or	r0, #PSR_R_BIT | PSR_I_BIT	@ disable irqs
-	mov.a	asr, r0
-
-	@ process identify
-	movc	r0, p0.c0, #0			@ cpuid
-	movl	r1, 0xff00ffff			@ mask
-	movl	r2, 0x4d000863			@ value
-	and	r0, r1, r0
-	cxor.a	r0, r2
-	bne	__error_p			@ invalid processor id
-
-	/*
-	 * Clear the 4K level 1 swapper page table
-	 */
-	movl	r0, #KERNEL_PGD_PADDR		@ page table address
-	mov	r1, #0
-	add	r2, r0, #0x1000
-101:	stw.w	r1, [r0]+, #4
-	stw.w	r1, [r0]+, #4
-	stw.w	r1, [r0]+, #4
-	stw.w	r1, [r0]+, #4
-	cxor.a	r0, r2
-	bne	101b
-
-	movl	r4, #KERNEL_PGD_PADDR		@ page table address
-	mov	r7, #PMD_TYPE_SECT | PMD_PRESENT	@ page size: section
-	or	r7, r7, #PMD_SECT_CACHEABLE		@ cacheable
-	or	r7, r7, #PMD_SECT_READ | PMD_SECT_WRITE | PMD_SECT_EXEC
-
-	/*
-	 * Create identity mapping for first 4MB of kernel to
-	 * cater for the MMU enable.  This identity mapping
-	 * will be removed by paging_init().  We use our current program
-	 * counter to determine corresponding section base address.
-	 */
-	mov	r6, pc
-	mov	r6, r6 >> #22			@ start of kernel section
-	or	r1, r7, r6 << #22		@ flags + kernel base
-	stw	r1, [r4+], r6 << #2		@ identity mapping
-
-	/*
-	 * Now setup the pagetables for our kernel direct
-	 * mapped region.
-	 */
-	add	r0, r4,  #(KERNEL_START & 0xff000000) >> 20
-	stw.w	r1, [r0+], #(KERNEL_START & 0x00c00000) >> 20
-	movl	r6, #(KERNEL_END - 1)
-	add	r0, r0, #4
-	add	r6, r4, r6 >> #20
-102:	csub.a	r0, r6
-	add	r1, r1, #1 << 22
-	bua	103f
-	stw.w	r1, [r0]+, #4
-	b	102b
-103:
-	/*
-	 * Then map first 4MB of ram in case it contains our boot params.
-	 */
-	add	r0, r4, #PAGE_OFFSET >> 20
-	or	r6, r7, #(PHYS_OFFSET & 0xffc00000)
-	stw	r6, [r0]
-
-	ldw	r15, __switch_data		@ address to jump to after
-
-	/*
-	 * Initialise TLB, Caches, and MMU state ready to switch the MMU
-	 * on.
-	 */
-	mov	r0, #0
-	movc	p0.c5, r0, #28			@ cache invalidate all
-	nop8
-	movc	p0.c6, r0, #6			@ TLB invalidate all
-	nop8
-
-	/*
-	 * ..V. .... ..TB IDAM
-	 * ..1. .... ..01 1111
-	 */
-	movl	r0, #0x201f			@ control register setting
-
-	/*
-	 * Setup common bits before finally enabling the MMU.  Essentially
-	 * this is just loading the page table pointer and domain access
-	 * registers.
-	 */
-	#ifndef CONFIG_ALIGNMENT_TRAP
-		andn	r0, r0, #CR_A
-	#endif
-	#ifdef CONFIG_CPU_DCACHE_DISABLE
-		andn	r0, r0, #CR_D
-	#endif
-	#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-		andn	r0, r0, #CR_B
-	#endif
-	#ifdef CONFIG_CPU_ICACHE_DISABLE
-		andn	r0, r0, #CR_I
-	#endif
-
-	movc	p0.c2, r4, #0			@ set pgd
-	b	__turn_mmu_on
-ENDPROC(stext)
-
-/*
- * Enable the MMU.  This completely changes the structure of the visible
- * memory space.  You will not be able to trace execution through this.
- *
- *  r0  = cp#0 control register
- *  r15 = *virtual* address to jump to upon completion
- */
-	.align	5
-__turn_mmu_on:
-	mov	r0, r0
-	movc	p0.c1, r0, #0			@ write control reg
-	nop					@ fetch inst by phys addr
-	mov	pc, r15
-	nop8					@ fetch inst by phys addr
-ENDPROC(__turn_mmu_on)
-
-/*
- * Setup the initial page tables.  We only setup the barest
- * amount which are required to get the kernel running, which
- * generally means mapping in the kernel code.
- *
- * r9  = cpuid
- * r10 = procinfo
- *
- * Returns:
- *  r0, r3, r6, r7 corrupted
- *  r4 = physical page table address
- */
-	.ltorg
-
-	.align	2
-	.type	__switch_data, %object
-__switch_data:
-	.long	__mmap_switched
-	.long	__bss_start			@ r6
-	.long	_end				@ r7
-	.long	cr_alignment			@ r8
-	.long	init_thread_union + THREAD_START_SP @ sp
-
-/*
- * The following fragment of code is executed with the MMU on in MMU mode,
- * and uses absolute addresses; this is not position independent.
- *
- *  r0  = cp#0 control register
- */
-__mmap_switched:
-	adr	r3, __switch_data + 4
-
-	ldm.w	(r6, r7, r8), [r3]+
-	ldw	sp, [r3]
-
-	mov	fp, #0				@ Clear BSS (and zero fp)
-203:	csub.a	r6, r7
-	bea	204f
-	stw.w	fp, [r6]+,#4
-	b	203b
-204:
-	andn	r1, r0, #CR_A			@ Clear 'A' bit
-	stm	(r0, r1), [r8]+			@ Save control register values
-	b	start_kernel
-ENDPROC(__mmap_switched)
-
-/*
- * Exception handling.  Something went wrong and we can't proceed.  We
- * ought to tell the user, but since we don't have any guarantee that
- * we're even running on the right architecture, we do virtually nothing.
- *
- * If CONFIG_DEBUG_LL is set we try to print out something about the error
- * and hope for the best (useful if bootloader fails to pass a proper
- * machine ID for example).
- */
-__error_p:
-#ifdef CONFIG_DEBUG_LL
-	adr	r0, str_p1
-	b.l	printascii
-	mov	r0, r9
-	b.l	printhex8
-	adr	r0, str_p2
-	b.l	printascii
-901:	nop8
-	b	901b
-str_p1:	.asciz	"\nError: unrecognized processor variant (0x"
-str_p2:	.asciz	").\n"
-	.align
-#endif
-ENDPROC(__error_p)
-
diff --git a/arch/unicore32/kernel/hibernate.c b/arch/unicore32/kernel/hibernate.c
deleted file mode 100644
index 4cdf3c846a2d..000000000000
--- a/arch/unicore32/kernel/hibernate.c
+++ /dev/null
@@ -1,159 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/unicore32/kernel/hibernate.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- *	Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
- *	Copyright (C) 2001-2010 Guan Xuetao
- */
-
-#include <linux/gfp.h>
-#include <linux/suspend.h>
-#include <linux/memblock.h>
-#include <linux/pgtable.h>
-
-#include <asm/page.h>
-#include <asm/pgalloc.h>
-#include <asm/sections.h>
-#include <asm/suspend.h>
-
-#include "mach/pm.h"
-
-/* Pointer to the temporary resume page tables */
-pgd_t *resume_pg_dir;
-
-struct swsusp_arch_regs swsusp_arch_regs_cpu0;
-
-/*
- * Create a middle page table on a resume-safe page and put a pointer to it in
- * the given global directory entry.  This only returns the gd entry
- * in non-PAE compilation mode, since the middle layer is folded.
- */
-static pmd_t *resume_one_md_table_init(pgd_t *pgd)
-{
-	pud_t *pud;
-	p4d_t *p4d;
-	pmd_t *pmd_table;
-
-	p4d = p4d_offset(pgd, 0);
-	pud = pud_offset(p4d, 0);
-	pmd_table = pmd_offset(pud, 0);
-
-	return pmd_table;
-}
-
-/*
- * Create a page table on a resume-safe page and place a pointer to it in
- * a middle page directory entry.
- */
-static pte_t *resume_one_page_table_init(pmd_t *pmd)
-{
-	if (pmd_none(*pmd)) {
-		pte_t *page_table = (pte_t *)get_safe_page(GFP_ATOMIC);
-		if (!page_table)
-			return NULL;
-
-		set_pmd(pmd, __pmd(__pa(page_table) | _PAGE_KERNEL_TABLE));
-
-		BUG_ON(page_table != pte_offset_kernel(pmd, 0));
-
-		return page_table;
-	}
-
-	return pte_offset_kernel(pmd, 0);
-}
-
-/*
- * This maps the physical memory to kernel virtual address space, a total
- * of max_low_pfn pages, by creating page tables starting from address
- * PAGE_OFFSET.  The page tables are allocated out of resume-safe pages.
- */
-static int resume_physical_mapping_init(pgd_t *pgd_base)
-{
-	unsigned long pfn;
-	pgd_t *pgd;
-	pmd_t *pmd;
-	pte_t *pte;
-	int pgd_idx, pmd_idx;
-
-	pgd_idx = pgd_index(PAGE_OFFSET);
-	pgd = pgd_base + pgd_idx;
-	pfn = 0;
-
-	for (; pgd_idx < PTRS_PER_PGD; pgd++, pgd_idx++) {
-		pmd = resume_one_md_table_init(pgd);
-		if (!pmd)
-			return -ENOMEM;
-
-		if (pfn >= max_low_pfn)
-			continue;
-
-		for (pmd_idx = 0; pmd_idx < PTRS_PER_PMD; pmd++, pmd_idx++) {
-			pte_t *max_pte;
-
-			if (pfn >= max_low_pfn)
-				break;
-
-			/* Map with normal page tables.
-			 * NOTE: We can mark everything as executable here
-			 */
-			pte = resume_one_page_table_init(pmd);
-			if (!pte)
-				return -ENOMEM;
-
-			max_pte = pte + PTRS_PER_PTE;
-			for (; pte < max_pte; pte++, pfn++) {
-				if (pfn >= max_low_pfn)
-					break;
-
-				set_pte(pte, pfn_pte(pfn, PAGE_KERNEL_EXEC));
-			}
-		}
-	}
-
-	return 0;
-}
-
-static inline void resume_init_first_level_page_table(pgd_t *pg_dir)
-{
-}
-
-int swsusp_arch_resume(void)
-{
-	int error;
-
-	resume_pg_dir = (pgd_t *)get_safe_page(GFP_ATOMIC);
-	if (!resume_pg_dir)
-		return -ENOMEM;
-
-	resume_init_first_level_page_table(resume_pg_dir);
-	error = resume_physical_mapping_init(resume_pg_dir);
-	if (error)
-		return error;
-
-	/* We have got enough memory and from now on we cannot recover */
-	restore_image(resume_pg_dir, restore_pblist);
-	return 0;
-}
-
-/*
- *	pfn_is_nosave - check if given pfn is in the 'nosave' section
- */
-
-int pfn_is_nosave(unsigned long pfn)
-{
-	unsigned long begin_pfn = __pa(&__nosave_begin) >> PAGE_SHIFT;
-	unsigned long end_pfn = PAGE_ALIGN(__pa(&__nosave_end)) >> PAGE_SHIFT;
-
-	return (pfn >= begin_pfn) && (pfn < end_pfn);
-}
-
-void save_processor_state(void)
-{
-}
-
-void restore_processor_state(void)
-{
-	local_flush_tlb_all();
-}
diff --git a/arch/unicore32/kernel/hibernate_asm.S b/arch/unicore32/kernel/hibernate_asm.S
deleted file mode 100644
index a589bc189e24..000000000000
--- a/arch/unicore32/kernel/hibernate_asm.S
+++ /dev/null
@@ -1,114 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/kernel/hibernate_asm.S
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- *	Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
- *	Copyright (C) 2001-2010 Guan Xuetao
- */
-
-#include <linux/sys.h>
-#include <linux/errno.h>
-#include <linux/linkage.h>
-#include <linux/pgtable.h>
-#include <generated/asm-offsets.h>
-#include <asm/page.h>
-#include <asm/assembler.h>
-
-@ restore_image(pgd_t *resume_pg_dir, struct pbe *restore_pblist)
-@ r0: resume_pg_dir
-@ r1: restore_pblist
-@ copy restore_pblist pages
-@ restore registers from swsusp_arch_regs_cpu0
-@
-ENTRY(restore_image)
-	sub	r0, r0, #PAGE_OFFSET
-	mov	r5, #0
-	movc	p0.c6, r5, #6	@invalidate ITLB & DTLB
-	movc	p0.c2, r0, #0
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-
-	.p2align 4,,7
-101:
-	csub.a	r1, #0
-	beq	109f
-
-	ldw	r6, [r1+], #PBE_ADDRESS
-	ldw	r7, [r1+], #PBE_ORIN_ADDRESS
-
-	movl	ip, #128
-102:	ldm.w	(r8 - r15), [r6]+
-	stm.w	(r8 - r15), [r7]+
-	sub.a	ip, ip, #1
-	bne	102b
-
-	ldw	r1, [r1+], #PBE_NEXT
-	b	101b
-
-	.p2align 4,,7
-109:
-	/* go back to the original page tables */
-	ldw	r0, =swapper_pg_dir
-	sub	r0, r0, #PAGE_OFFSET
-	mov	r5, #0
-	movc	p0.c6, r5, #6
-	movc	p0.c2, r0, #0
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-	nop
-
-#ifdef	CONFIG_UNICORE_FPU_F64
-	ldw	ip, 1f
-	add	ip, ip, #SWSUSP_FPSTATE
-	lfm.w	(f0  - f7 ), [ip]+
-	lfm.w	(f8  - f15), [ip]+
-	lfm.w	(f16 - f23), [ip]+
-	lfm.w	(f24 - f31), [ip]+
-	ldw	r4, [ip]
-	ctf	r4, s31
-#endif
-	mov	r0, #0x0
-	ldw	ip, 1f
-	add	ip, ip, #SWSUSP_CPU
-	ldm.w	(r4 - r15), [ip]+
-	ldm	(r16 - r27, sp, pc), [ip]+	@ Load all regs saved previously
-
-	.align	2
-1:	.long	swsusp_arch_regs_cpu0
-
-
-@ swsusp_arch_suspend()
-@ - prepare pc for resume, return from function without swsusp_save on resume
-@ - save registers in swsusp_arch_regs_cpu0
-@ - call swsusp_save write suspend image
-
-ENTRY(swsusp_arch_suspend)
-	ldw	ip, 1f
-	add	ip, ip, #SWSUSP_CPU
-	stm.w	(r4 - r15), [ip]+
-	stm.w	(r16 - r27, sp, lr), [ip]+
-
-#ifdef	CONFIG_UNICORE_FPU_F64
-	ldw	ip, 1f
-	add	ip, ip, #SWSUSP_FPSTATE
-	sfm.w	(f0  - f7 ), [ip]+
-	sfm.w	(f8  - f15), [ip]+
-	sfm.w	(f16 - f23), [ip]+
-	sfm.w	(f24 - f31), [ip]+
-	cff	r4, s31
-	stw	r4, [ip]
-#endif
-	b	swsusp_save			@ no return
-
-1:	.long	swsusp_arch_regs_cpu0
diff --git a/arch/unicore32/kernel/irq.c b/arch/unicore32/kernel/irq.c
deleted file mode 100644
index c014ae3c3e48..000000000000
--- a/arch/unicore32/kernel/irq.c
+++ /dev/null
@@ -1,371 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/irq.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/kernel_stat.h>
-#include <linux/module.h>
-#include <linux/signal.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/random.h>
-#include <linux/smp.h>
-#include <linux/init.h>
-#include <linux/seq_file.h>
-#include <linux/errno.h>
-#include <linux/list.h>
-#include <linux/kallsyms.h>
-#include <linux/proc_fs.h>
-#include <linux/syscore_ops.h>
-
-#include <mach/hardware.h>
-
-#include "setup.h"
-
-/*
- * PKUnity GPIO edge detection for IRQs:
- * IRQs are generated on Falling-Edge, Rising-Edge, or both.
- * Use this instead of directly setting GRER/GFER.
- */
-static int GPIO_IRQ_rising_edge;
-static int GPIO_IRQ_falling_edge;
-static int GPIO_IRQ_mask = 0;
-
-#define GPIO_MASK(irq)		(1 << (irq - IRQ_GPIO0))
-
-static int puv3_gpio_type(struct irq_data *d, unsigned int type)
-{
-	unsigned int mask;
-
-	if (d->irq < IRQ_GPIOHIGH)
-		mask = 1 << d->irq;
-	else
-		mask = GPIO_MASK(d->irq);
-
-	if (type == IRQ_TYPE_PROBE) {
-		if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask)
-			return 0;
-		type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
-	}
-
-	if (type & IRQ_TYPE_EDGE_RISING)
-		GPIO_IRQ_rising_edge |= mask;
-	else
-		GPIO_IRQ_rising_edge &= ~mask;
-	if (type & IRQ_TYPE_EDGE_FALLING)
-		GPIO_IRQ_falling_edge |= mask;
-	else
-		GPIO_IRQ_falling_edge &= ~mask;
-
-	writel(GPIO_IRQ_rising_edge & GPIO_IRQ_mask, GPIO_GRER);
-	writel(GPIO_IRQ_falling_edge & GPIO_IRQ_mask, GPIO_GFER);
-
-	return 0;
-}
-
-/*
- * GPIO IRQs must be acknowledged.  This is for IRQs from 0 to 7.
- */
-static void puv3_low_gpio_ack(struct irq_data *d)
-{
-	writel((1 << d->irq), GPIO_GEDR);
-}
-
-static void puv3_low_gpio_mask(struct irq_data *d)
-{
-	writel(readl(INTC_ICMR) & ~(1 << d->irq), INTC_ICMR);
-}
-
-static void puv3_low_gpio_unmask(struct irq_data *d)
-{
-	writel(readl(INTC_ICMR) | (1 << d->irq), INTC_ICMR);
-}
-
-static int puv3_low_gpio_wake(struct irq_data *d, unsigned int on)
-{
-	if (on)
-		writel(readl(PM_PWER) | (1 << d->irq), PM_PWER);
-	else
-		writel(readl(PM_PWER) & ~(1 << d->irq), PM_PWER);
-	return 0;
-}
-
-static struct irq_chip puv3_low_gpio_chip = {
-	.name		= "GPIO-low",
-	.irq_ack	= puv3_low_gpio_ack,
-	.irq_mask	= puv3_low_gpio_mask,
-	.irq_unmask	= puv3_low_gpio_unmask,
-	.irq_set_type	= puv3_gpio_type,
-	.irq_set_wake	= puv3_low_gpio_wake,
-};
-
-/*
- * IRQ8 (GPIO0 through 27) handler.  We enter here with the
- * irq_controller_lock held, and IRQs disabled.  Decode the IRQ
- * and call the handler.
- */
-static void puv3_gpio_handler(struct irq_desc *desc)
-{
-	unsigned int mask, irq;
-
-	mask = readl(GPIO_GEDR);
-	do {
-		/*
-		 * clear down all currently active IRQ sources.
-		 * We will be processing them all.
-		 */
-		writel(mask, GPIO_GEDR);
-
-		irq = IRQ_GPIO0;
-		do {
-			if (mask & 1)
-				generic_handle_irq(irq);
-			mask >>= 1;
-			irq++;
-		} while (mask);
-		mask = readl(GPIO_GEDR);
-	} while (mask);
-}
-
-/*
- * GPIO0-27 edge IRQs need to be handled specially.
- * In addition, the IRQs are all collected up into one bit in the
- * interrupt controller registers.
- */
-static void puv3_high_gpio_ack(struct irq_data *d)
-{
-	unsigned int mask = GPIO_MASK(d->irq);
-
-	writel(mask, GPIO_GEDR);
-}
-
-static void puv3_high_gpio_mask(struct irq_data *d)
-{
-	unsigned int mask = GPIO_MASK(d->irq);
-
-	GPIO_IRQ_mask &= ~mask;
-
-	writel(readl(GPIO_GRER) & ~mask, GPIO_GRER);
-	writel(readl(GPIO_GFER) & ~mask, GPIO_GFER);
-}
-
-static void puv3_high_gpio_unmask(struct irq_data *d)
-{
-	unsigned int mask = GPIO_MASK(d->irq);
-
-	GPIO_IRQ_mask |= mask;
-
-	writel(GPIO_IRQ_rising_edge & GPIO_IRQ_mask, GPIO_GRER);
-	writel(GPIO_IRQ_falling_edge & GPIO_IRQ_mask, GPIO_GFER);
-}
-
-static int puv3_high_gpio_wake(struct irq_data *d, unsigned int on)
-{
-	if (on)
-		writel(readl(PM_PWER) | PM_PWER_GPIOHIGH, PM_PWER);
-	else
-		writel(readl(PM_PWER) & ~PM_PWER_GPIOHIGH, PM_PWER);
-	return 0;
-}
-
-static struct irq_chip puv3_high_gpio_chip = {
-	.name		= "GPIO-high",
-	.irq_ack	= puv3_high_gpio_ack,
-	.irq_mask	= puv3_high_gpio_mask,
-	.irq_unmask	= puv3_high_gpio_unmask,
-	.irq_set_type	= puv3_gpio_type,
-	.irq_set_wake	= puv3_high_gpio_wake,
-};
-
-/*
- * We don't need to ACK IRQs on the PKUnity unless they're GPIOs
- * this is for internal IRQs i.e. from 8 to 31.
- */
-static void puv3_mask_irq(struct irq_data *d)
-{
-	writel(readl(INTC_ICMR) & ~(1 << d->irq), INTC_ICMR);
-}
-
-static void puv3_unmask_irq(struct irq_data *d)
-{
-	writel(readl(INTC_ICMR) | (1 << d->irq), INTC_ICMR);
-}
-
-/*
- * Apart form GPIOs, only the RTC alarm can be a wakeup event.
- */
-static int puv3_set_wake(struct irq_data *d, unsigned int on)
-{
-	if (d->irq == IRQ_RTCAlarm) {
-		if (on)
-			writel(readl(PM_PWER) | PM_PWER_RTC, PM_PWER);
-		else
-			writel(readl(PM_PWER) & ~PM_PWER_RTC, PM_PWER);
-		return 0;
-	}
-	return -EINVAL;
-}
-
-static struct irq_chip puv3_normal_chip = {
-	.name		= "PKUnity-v3",
-	.irq_ack	= puv3_mask_irq,
-	.irq_mask	= puv3_mask_irq,
-	.irq_unmask	= puv3_unmask_irq,
-	.irq_set_wake	= puv3_set_wake,
-};
-
-static struct resource irq_resource = {
-	.name	= "irqs",
-	.start	= io_v2p(PKUNITY_INTC_BASE),
-	.end	= io_v2p(PKUNITY_INTC_BASE) + 0xFFFFF,
-};
-
-static struct puv3_irq_state {
-	unsigned int	saved;
-	unsigned int	icmr;
-	unsigned int	iclr;
-	unsigned int	iccr;
-} puv3_irq_state;
-
-static int puv3_irq_suspend(void)
-{
-	struct puv3_irq_state *st = &puv3_irq_state;
-
-	st->saved = 1;
-	st->icmr = readl(INTC_ICMR);
-	st->iclr = readl(INTC_ICLR);
-	st->iccr = readl(INTC_ICCR);
-
-	/*
-	 * Disable all GPIO-based interrupts.
-	 */
-	writel(readl(INTC_ICMR) & ~(0x1ff), INTC_ICMR);
-
-	/*
-	 * Set the appropriate edges for wakeup.
-	 */
-	writel(readl(PM_PWER) & GPIO_IRQ_rising_edge, GPIO_GRER);
-	writel(readl(PM_PWER) & GPIO_IRQ_falling_edge, GPIO_GFER);
-
-	/*
-	 * Clear any pending GPIO interrupts.
-	 */
-	writel(readl(GPIO_GEDR), GPIO_GEDR);
-
-	return 0;
-}
-
-static void puv3_irq_resume(void)
-{
-	struct puv3_irq_state *st = &puv3_irq_state;
-
-	if (st->saved) {
-		writel(st->iccr, INTC_ICCR);
-		writel(st->iclr, INTC_ICLR);
-
-		writel(GPIO_IRQ_rising_edge & GPIO_IRQ_mask, GPIO_GRER);
-		writel(GPIO_IRQ_falling_edge & GPIO_IRQ_mask, GPIO_GFER);
-
-		writel(st->icmr, INTC_ICMR);
-	}
-}
-
-static struct syscore_ops puv3_irq_syscore_ops = {
-	.suspend	= puv3_irq_suspend,
-	.resume		= puv3_irq_resume,
-};
-
-static int __init puv3_irq_init_syscore(void)
-{
-	register_syscore_ops(&puv3_irq_syscore_ops);
-	return 0;
-}
-
-device_initcall(puv3_irq_init_syscore);
-
-void __init init_IRQ(void)
-{
-	unsigned int irq;
-
-	request_resource(&iomem_resource, &irq_resource);
-
-	/* disable all IRQs */
-	writel(0, INTC_ICMR);
-
-	/* all IRQs are IRQ, not REAL */
-	writel(0, INTC_ICLR);
-
-	/* clear all GPIO edge detects */
-	writel(FMASK(8, 0) & ~FIELD(1, 1, GPI_SOFF_REQ), GPIO_GPIR);
-	writel(0, GPIO_GFER);
-	writel(0, GPIO_GRER);
-	writel(0x0FFFFFFF, GPIO_GEDR);
-
-	writel(1, INTC_ICCR);
-
-	for (irq = 0; irq < IRQ_GPIOHIGH; irq++) {
-		irq_set_chip(irq, &puv3_low_gpio_chip);
-		irq_set_handler(irq, handle_edge_irq);
-		irq_modify_status(irq,
-			IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN,
-			0);
-	}
-
-	for (irq = IRQ_GPIOHIGH + 1; irq < IRQ_GPIO0; irq++) {
-		irq_set_chip(irq, &puv3_normal_chip);
-		irq_set_handler(irq, handle_level_irq);
-		irq_modify_status(irq,
-			IRQ_NOREQUEST | IRQ_NOAUTOEN,
-			IRQ_NOPROBE);
-	}
-
-	for (irq = IRQ_GPIO0; irq <= IRQ_GPIO27; irq++) {
-		irq_set_chip(irq, &puv3_high_gpio_chip);
-		irq_set_handler(irq, handle_edge_irq);
-		irq_modify_status(irq,
-			IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN,
-			0);
-	}
-
-	/*
-	 * Install handler for GPIO 0-27 edge detect interrupts
-	 */
-	irq_set_chip(IRQ_GPIOHIGH, &puv3_normal_chip);
-	irq_set_chained_handler(IRQ_GPIOHIGH, puv3_gpio_handler);
-
-#ifdef CONFIG_PUV3_GPIO
-	puv3_init_gpio();
-#endif
-}
-
-/*
- * do_IRQ handles all hardware IRQ's.  Decoded IRQs should not
- * come via this function.  Instead, they should provide their
- * own 'handler'
- */
-asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
-{
-	struct pt_regs *old_regs = set_irq_regs(regs);
-
-	irq_enter();
-
-	/*
-	 * Some hardware gives randomly wrong interrupts.  Rather
-	 * than crashing, do something sensible.
-	 */
-	if (unlikely(irq >= nr_irqs)) {
-		if (printk_ratelimit())
-			printk(KERN_WARNING "Bad IRQ%u\n", irq);
-		ack_bad_irq(irq);
-	} else {
-		generic_handle_irq(irq);
-	}
-
-	irq_exit();
-	set_irq_regs(old_regs);
-}
-
diff --git a/arch/unicore32/kernel/ksyms.c b/arch/unicore32/kernel/ksyms.c
deleted file mode 100644
index 731445008932..000000000000
--- a/arch/unicore32/kernel/ksyms.c
+++ /dev/null
@@ -1,57 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/ksyms.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/string.h>
-#include <linux/delay.h>
-#include <linux/in6.h>
-#include <linux/syscalls.h>
-#include <linux/uaccess.h>
-#include <linux/io.h>
-
-#include <asm/checksum.h>
-
-#include "ksyms.h"
-
-EXPORT_SYMBOL(find_first_bit);
-EXPORT_SYMBOL(find_first_zero_bit);
-EXPORT_SYMBOL(find_next_zero_bit);
-EXPORT_SYMBOL(find_next_bit);
-
-	/* platform dependent support */
-EXPORT_SYMBOL(__udelay);
-EXPORT_SYMBOL(__const_udelay);
-
-	/* string / mem functions */
-EXPORT_SYMBOL(strchr);
-EXPORT_SYMBOL(strrchr);
-EXPORT_SYMBOL(memset);
-EXPORT_SYMBOL(memcpy);
-EXPORT_SYMBOL(memmove);
-EXPORT_SYMBOL(memchr);
-
-	/* user mem (segment) */
-EXPORT_SYMBOL(__strnlen_user);
-EXPORT_SYMBOL(__strncpy_from_user);
-
-EXPORT_SYMBOL(copy_page);
-
-EXPORT_SYMBOL(raw_copy_from_user);
-EXPORT_SYMBOL(raw_copy_to_user);
-EXPORT_SYMBOL(__clear_user);
-
-EXPORT_SYMBOL(__ashldi3);
-EXPORT_SYMBOL(__ashrdi3);
-EXPORT_SYMBOL(__divsi3);
-EXPORT_SYMBOL(__lshrdi3);
-EXPORT_SYMBOL(__modsi3);
-EXPORT_SYMBOL(__ucmpdi2);
-EXPORT_SYMBOL(__udivsi3);
-EXPORT_SYMBOL(__umodsi3);
-
diff --git a/arch/unicore32/kernel/ksyms.h b/arch/unicore32/kernel/ksyms.h
deleted file mode 100644
index 5d2d5ba324ac..000000000000
--- a/arch/unicore32/kernel/ksyms.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * libgcc functions - functions that are used internally by the
- * compiler...  (prototypes are not correct though, but that
- * doesn't really matter since they're not versioned).
- */
-extern void __ashldi3(void);
-extern void __ashrdi3(void);
-extern void __divsi3(void);
-extern void __lshrdi3(void);
-extern void __modsi3(void);
-extern void __ucmpdi2(void);
-extern void __udivsi3(void);
-extern void __umodsi3(void);
diff --git a/arch/unicore32/kernel/module.c b/arch/unicore32/kernel/module.c
deleted file mode 100644
index 67c89ef2d6ee..000000000000
--- a/arch/unicore32/kernel/module.c
+++ /dev/null
@@ -1,105 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/module.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/module.h>
-#include <linux/moduleloader.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/elf.h>
-#include <linux/vmalloc.h>
-#include <linux/fs.h>
-#include <linux/string.h>
-#include <linux/gfp.h>
-
-#include <asm/sections.h>
-
-void *module_alloc(unsigned long size)
-{
-	return __vmalloc_node_range(size, 1, MODULES_VADDR, MODULES_END,
-				GFP_KERNEL, PAGE_KERNEL_EXEC, 0, NUMA_NO_NODE,
-				__builtin_return_address(0));
-}
-
-int
-apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
-	       unsigned int relindex, struct module *module)
-{
-	Elf32_Shdr *symsec = sechdrs + symindex;
-	Elf32_Shdr *relsec = sechdrs + relindex;
-	Elf32_Shdr *dstsec = sechdrs + relsec->sh_info;
-	Elf32_Rel *rel = (void *)relsec->sh_addr;
-	unsigned int i;
-
-	for (i = 0; i < relsec->sh_size / sizeof(Elf32_Rel); i++, rel++) {
-		unsigned long loc;
-		Elf32_Sym *sym;
-		s32 offset;
-
-		offset = ELF32_R_SYM(rel->r_info);
-		if (offset < 0 || offset >
-				(symsec->sh_size / sizeof(Elf32_Sym))) {
-			printk(KERN_ERR "%s: bad relocation, "
-					"section %d reloc %d\n",
-					module->name, relindex, i);
-			return -ENOEXEC;
-		}
-
-		sym = ((Elf32_Sym *)symsec->sh_addr) + offset;
-
-		if (rel->r_offset < 0 || rel->r_offset >
-				dstsec->sh_size - sizeof(u32)) {
-			printk(KERN_ERR "%s: out of bounds relocation, "
-				"section %d reloc %d offset %d size %d\n",
-				module->name, relindex, i, rel->r_offset,
-				dstsec->sh_size);
-			return -ENOEXEC;
-		}
-
-		loc = dstsec->sh_addr + rel->r_offset;
-
-		switch (ELF32_R_TYPE(rel->r_info)) {
-		case R_UNICORE_NONE:
-			/* ignore */
-			break;
-
-		case R_UNICORE_ABS32:
-			*(u32 *)loc += sym->st_value;
-			break;
-
-		case R_UNICORE_PC24:
-		case R_UNICORE_CALL:
-		case R_UNICORE_JUMP24:
-			offset = (*(u32 *)loc & 0x00ffffff) << 2;
-			if (offset & 0x02000000)
-				offset -= 0x04000000;
-
-			offset += sym->st_value - loc;
-			if (offset & 3 ||
-			    offset <= (s32)0xfe000000 ||
-			    offset >= (s32)0x02000000) {
-				printk(KERN_ERR
-				       "%s: relocation out of range, section "
-				       "%d reloc %d sym '%s'\n", module->name,
-				       relindex, i, strtab + sym->st_name);
-				return -ENOEXEC;
-			}
-
-			offset >>= 2;
-
-			*(u32 *)loc &= 0xff000000;
-			*(u32 *)loc |= offset & 0x00ffffff;
-			break;
-
-		default:
-			printk(KERN_ERR "%s: unknown relocation: %u\n",
-			       module->name, ELF32_R_TYPE(rel->r_info));
-			return -ENOEXEC;
-		}
-	}
-	return 0;
-}
diff --git a/arch/unicore32/kernel/pci.c b/arch/unicore32/kernel/pci.c
deleted file mode 100644
index 0d098aa05b47..000000000000
--- a/arch/unicore32/kernel/pci.c
+++ /dev/null
@@ -1,371 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/pci.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- *
- *  PCI bios-type initialisation for PCI machines
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-static int debug_pci;
-
-#define CONFIG_CMD(bus, devfn, where)	\
-	(0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3))
-
-static int
-puv3_read_config(struct pci_bus *bus, unsigned int devfn, int where,
-			int size, u32 *value)
-{
-	writel(CONFIG_CMD(bus, devfn, where), PCICFG_ADDR);
-	switch (size) {
-	case 1:
-		*value = (readl(PCICFG_DATA) >> ((where & 3) * 8)) & 0xFF;
-		break;
-	case 2:
-		*value = (readl(PCICFG_DATA) >> ((where & 2) * 8)) & 0xFFFF;
-		break;
-	case 4:
-		*value = readl(PCICFG_DATA);
-		break;
-	}
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-puv3_write_config(struct pci_bus *bus, unsigned int devfn, int where,
-			int size, u32 value)
-{
-	writel(CONFIG_CMD(bus, devfn, where), PCICFG_ADDR);
-	switch (size) {
-	case 1:
-		writel((readl(PCICFG_DATA) & ~FMASK(8, (where&3)*8))
-			| FIELD(value, 8, (where&3)*8), PCICFG_DATA);
-		break;
-	case 2:
-		writel((readl(PCICFG_DATA) & ~FMASK(16, (where&2)*8))
-			| FIELD(value, 16, (where&2)*8), PCICFG_DATA);
-		break;
-	case 4:
-		writel(value, PCICFG_DATA);
-		break;
-	}
-	return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops pci_puv3_ops = {
-	.read  = puv3_read_config,
-	.write = puv3_write_config,
-};
-
-void pci_puv3_preinit(void)
-{
-	printk(KERN_DEBUG "PCI: PKUnity PCI Controller Initializing ...\n");
-	/* config PCI bridge base */
-	writel(io_v2p(PKUNITY_PCIBRI_BASE), PCICFG_BRIBASE);
-
-	writel(0, PCIBRI_AHBCTL0);
-	writel(io_v2p(PKUNITY_PCIBRI_BASE) | PCIBRI_BARx_MEM, PCIBRI_AHBBAR0);
-	writel(0xFFFF0000, PCIBRI_AHBAMR0);
-	writel(0, PCIBRI_AHBTAR0);
-
-	writel(PCIBRI_CTLx_AT, PCIBRI_AHBCTL1);
-	writel(io_v2p(PKUNITY_PCILIO_BASE) | PCIBRI_BARx_IO, PCIBRI_AHBBAR1);
-	writel(0xFFFF0000, PCIBRI_AHBAMR1);
-	writel(0x00000000, PCIBRI_AHBTAR1);
-
-	writel(PCIBRI_CTLx_PREF, PCIBRI_AHBCTL2);
-	writel(io_v2p(PKUNITY_PCIMEM_BASE) | PCIBRI_BARx_MEM, PCIBRI_AHBBAR2);
-	writel(0xF8000000, PCIBRI_AHBAMR2);
-	writel(0, PCIBRI_AHBTAR2);
-
-	writel(io_v2p(PKUNITY_PCIAHB_BASE) | PCIBRI_BARx_MEM, PCIBRI_BAR1);
-
-	writel(PCIBRI_CTLx_AT | PCIBRI_CTLx_PREF, PCIBRI_PCICTL0);
-	writel(io_v2p(PKUNITY_PCIAHB_BASE) | PCIBRI_BARx_MEM, PCIBRI_PCIBAR0);
-	writel(0xF8000000, PCIBRI_PCIAMR0);
-	writel(PKUNITY_SDRAM_BASE, PCIBRI_PCITAR0);
-
-	writel(readl(PCIBRI_CMD) | PCIBRI_CMD_IO | PCIBRI_CMD_MEM, PCIBRI_CMD);
-}
-
-static int pci_puv3_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	if (dev->bus->number == 0) {
-#ifdef CONFIG_ARCH_FPGA /* 4 pci slots */
-		if      (dev->devfn == 0x00)
-			return IRQ_PCIINTA;
-		else if (dev->devfn == 0x08)
-			return IRQ_PCIINTB;
-		else if (dev->devfn == 0x10)
-			return IRQ_PCIINTC;
-		else if (dev->devfn == 0x18)
-			return IRQ_PCIINTD;
-#endif
-#ifdef CONFIG_PUV3_DB0913 /* 3 pci slots */
-		if      (dev->devfn == 0x30)
-			return IRQ_PCIINTB;
-		else if (dev->devfn == 0x60)
-			return IRQ_PCIINTC;
-		else if (dev->devfn == 0x58)
-			return IRQ_PCIINTD;
-#endif
-#if	defined(CONFIG_PUV3_NB0916) || defined(CONFIG_PUV3_SMW0919)
-		/* only support 2 pci devices */
-		if      (dev->devfn == 0x00)
-			return IRQ_PCIINTC; /* sata */
-#endif
-	}
-	return -1;
-}
-
-/*
- * Only first 128MB of memory can be accessed via PCI.
- * We use GFP_DMA to allocate safe buffers to do map/unmap.
- * This is really ugly and we need a better way of specifying
- * DMA-capable regions of memory.
- */
-void __init puv3_pci_adjust_zones(unsigned long max_zone_pfn)
-{
-	unsigned int sz = SZ_128M >> PAGE_SHIFT;
-
-	max_zone_pfn[ZONE_DMA] = sz;
-}
-
-/*
- * If the bus contains any of these devices, then we must not turn on
- * parity checking of any kind.
- */
-static inline int pdev_bad_for_parity(struct pci_dev *dev)
-{
-	return 0;
-}
-
-/*
- * pcibios_fixup_bus - Called after each bus is probed,
- * but before its children are examined.
- */
-void pcibios_fixup_bus(struct pci_bus *bus)
-{
-	struct pci_dev *dev;
-	u16 features = PCI_COMMAND_SERR
-		| PCI_COMMAND_PARITY
-		| PCI_COMMAND_FAST_BACK;
-
-	bus->resource[0] = &ioport_resource;
-	bus->resource[1] = &iomem_resource;
-
-	/*
-	 * Walk the devices on this bus, working out what we can
-	 * and can't support.
-	 */
-	list_for_each_entry(dev, &bus->devices, bus_list) {
-		u16 status;
-
-		pci_read_config_word(dev, PCI_STATUS, &status);
-
-		/*
-		 * If any device on this bus does not support fast back
-		 * to back transfers, then the bus as a whole is not able
-		 * to support them.  Having fast back to back transfers
-		 * on saves us one PCI cycle per transaction.
-		 */
-		if (!(status & PCI_STATUS_FAST_BACK))
-			features &= ~PCI_COMMAND_FAST_BACK;
-
-		if (pdev_bad_for_parity(dev))
-			features &= ~(PCI_COMMAND_SERR
-					| PCI_COMMAND_PARITY);
-
-		switch (dev->class >> 8) {
-		case PCI_CLASS_BRIDGE_PCI:
-			pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &status);
-			status |= PCI_BRIDGE_CTL_PARITY
-				| PCI_BRIDGE_CTL_MASTER_ABORT;
-			status &= ~(PCI_BRIDGE_CTL_BUS_RESET
-				| PCI_BRIDGE_CTL_FAST_BACK);
-			pci_write_config_word(dev, PCI_BRIDGE_CONTROL, status);
-			break;
-
-		case PCI_CLASS_BRIDGE_CARDBUS:
-			pci_read_config_word(dev, PCI_CB_BRIDGE_CONTROL,
-					&status);
-			status |= PCI_CB_BRIDGE_CTL_PARITY
-				| PCI_CB_BRIDGE_CTL_MASTER_ABORT;
-			pci_write_config_word(dev, PCI_CB_BRIDGE_CONTROL,
-					status);
-			break;
-		}
-	}
-
-	/*
-	 * Now walk the devices again, this time setting them up.
-	 */
-	list_for_each_entry(dev, &bus->devices, bus_list) {
-		u16 cmd;
-
-		pci_read_config_word(dev, PCI_COMMAND, &cmd);
-		cmd |= features;
-		pci_write_config_word(dev, PCI_COMMAND, cmd);
-
-		pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE,
-				      L1_CACHE_BYTES >> 2);
-	}
-
-	/*
-	 * Propagate the flags to the PCI bridge.
-	 */
-	if (bus->self && bus->self->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
-		if (features & PCI_COMMAND_FAST_BACK)
-			bus->bridge_ctl |= PCI_BRIDGE_CTL_FAST_BACK;
-		if (features & PCI_COMMAND_PARITY)
-			bus->bridge_ctl |= PCI_BRIDGE_CTL_PARITY;
-	}
-
-	/*
-	 * Report what we did for this bus
-	 */
-	printk(KERN_INFO "PCI: bus%d: Fast back to back transfers %sabled\n",
-		bus->number, (features & PCI_COMMAND_FAST_BACK) ? "en" : "dis");
-}
-EXPORT_SYMBOL(pcibios_fixup_bus);
-
-static struct resource busn_resource = {
-	.name	= "PCI busn",
-	.start	= 0,
-	.end	= 255,
-	.flags	= IORESOURCE_BUS,
-};
-
-static int __init pci_common_init(void)
-{
-	struct pci_bus *puv3_bus;
-	struct pci_host_bridge *bridge;
-	int ret;
-
-	bridge = pci_alloc_host_bridge(0);
-	if (!bridge)
-		return -ENOMEM;
-
-	pci_puv3_preinit();
-
-	pci_add_resource(&bridge->windows, &ioport_resource);
-	pci_add_resource(&bridge->windows, &iomem_resource);
-	pci_add_resource(&bridge->windows, &busn_resource);
-	bridge->sysdata = NULL;
-	bridge->busnr = 0;
-	bridge->ops = &pci_puv3_ops;
-	bridge->swizzle_irq = pci_common_swizzle;
-	bridge->map_irq = pci_puv3_map_irq;
-
-	/* Scan our single hose.  */
-	ret = pci_scan_root_bus_bridge(bridge);
-	if (ret) {
-		pci_free_host_bridge(bridge);
-		return;
-	}
-
-	puv3_bus = bridge->bus;
-
-	if (!puv3_bus)
-		panic("PCI: unable to scan bus!");
-
-	pci_bus_size_bridges(puv3_bus);
-	pci_bus_assign_resources(puv3_bus);
-	pci_bus_add_devices(puv3_bus);
-	return 0;
-}
-subsys_initcall(pci_common_init);
-
-char * __init pcibios_setup(char *str)
-{
-	if (!strcmp(str, "debug")) {
-		debug_pci = 1;
-		return NULL;
-	}
-	return str;
-}
-
-void pcibios_set_master(struct pci_dev *dev)
-{
-	/* No special bus mastering setup handling */
-}
-
-/*
- * From arch/i386/kernel/pci-i386.c:
- *
- * We need to avoid collisions with `mirrored' VGA ports
- * and other strange ISA hardware, so we always want the
- * addresses to be allocated in the 0x000-0x0ff region
- * modulo 0x400.
- *
- * Why? Because some silly external IO cards only decode
- * the low 10 bits of the IO address. The 0x00-0xff region
- * is reserved for motherboard devices that decode all 16
- * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
- * but we want to try to avoid allocating at 0x2900-0x2bff
- * which might be mirrored at 0x0100-0x03ff..
- */
-resource_size_t pcibios_align_resource(void *data, const struct resource *res,
-				resource_size_t size, resource_size_t align)
-{
-	resource_size_t start = res->start;
-
-	if (res->flags & IORESOURCE_IO && start & 0x300)
-		start = (start + 0x3ff) & ~0x3ff;
-
-	start = (start + align - 1) & ~(align - 1);
-
-	return start;
-}
-
-/**
- * pcibios_enable_device - Enable I/O and memory.
- * @dev: PCI device to be enabled
- */
-int pcibios_enable_device(struct pci_dev *dev, int mask)
-{
-	u16 cmd, old_cmd;
-	int idx;
-	struct resource *r;
-
-	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-	old_cmd = cmd;
-	for (idx = 0; idx < 6; idx++) {
-		/* Only set up the requested stuff */
-		if (!(mask & (1 << idx)))
-			continue;
-
-		r = dev->resource + idx;
-		if (!r->start && r->end) {
-			printk(KERN_ERR "PCI: Device %s not available because"
-			       " of resource collisions\n", pci_name(dev));
-			return -EINVAL;
-		}
-		if (r->flags & IORESOURCE_IO)
-			cmd |= PCI_COMMAND_IO;
-		if (r->flags & IORESOURCE_MEM)
-			cmd |= PCI_COMMAND_MEMORY;
-	}
-
-	/*
-	 * Bridges (eg, cardbus bridges) need to be fully enabled
-	 */
-	if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE)
-		cmd |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
-
-	if (cmd != old_cmd) {
-		printk("PCI: enabling device %s (%04x -> %04x)\n",
-		       pci_name(dev), old_cmd, cmd);
-		pci_write_config_word(dev, PCI_COMMAND, cmd);
-	}
-	return 0;
-}
diff --git a/arch/unicore32/kernel/pm.c b/arch/unicore32/kernel/pm.c
deleted file mode 100644
index 94b7f9df6c1a..000000000000
--- a/arch/unicore32/kernel/pm.c
+++ /dev/null
@@ -1,121 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/pm.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- *	Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
- *	Copyright (C) 2001-2010 Guan Xuetao
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/suspend.h>
-#include <linux/errno.h>
-#include <linux/slab.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/pm.h>
-
-#include "setup.h"
-
-struct puv3_cpu_pm_fns *puv3_cpu_pm_fns;
-static unsigned long *sleep_save;
-
-int puv3_pm_enter(suspend_state_t state)
-{
-	unsigned long sleep_save_checksum = 0, checksum = 0;
-	int i;
-
-	/* skip registers saving for standby */
-	if (state != PM_SUSPEND_STANDBY) {
-		puv3_cpu_pm_fns->save(sleep_save);
-		/* before sleeping, calculate and save a checksum */
-		for (i = 0; i < puv3_cpu_pm_fns->save_count - 1; i++)
-			sleep_save_checksum += sleep_save[i];
-	}
-
-	/* *** go zzz *** */
-	puv3_cpu_pm_fns->enter(state);
-	cpu_init();
-#ifdef CONFIG_INPUT_KEYBOARD
-	puv3_ps2_init();
-#endif
-#ifdef CONFIG_PCI
-	pci_puv3_preinit();
-#endif
-	if (state != PM_SUSPEND_STANDBY) {
-		/* after sleeping, validate the checksum */
-		for (i = 0; i < puv3_cpu_pm_fns->save_count - 1; i++)
-			checksum += sleep_save[i];
-
-		/* if invalid, display message and wait for a hardware reset */
-		if (checksum != sleep_save_checksum) {
-			while (1)
-				puv3_cpu_pm_fns->enter(state);
-		}
-		puv3_cpu_pm_fns->restore(sleep_save);
-	}
-
-	pr_debug("*** made it back from resume\n");
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(puv3_pm_enter);
-
-unsigned long sleep_phys_sp(void *sp)
-{
-	return virt_to_phys(sp);
-}
-
-static int puv3_pm_valid(suspend_state_t state)
-{
-	if (puv3_cpu_pm_fns)
-		return puv3_cpu_pm_fns->valid(state);
-
-	return -EINVAL;
-}
-
-static int puv3_pm_prepare(void)
-{
-	int ret = 0;
-
-	if (puv3_cpu_pm_fns && puv3_cpu_pm_fns->prepare)
-		ret = puv3_cpu_pm_fns->prepare();
-
-	return ret;
-}
-
-static void puv3_pm_finish(void)
-{
-	if (puv3_cpu_pm_fns && puv3_cpu_pm_fns->finish)
-		puv3_cpu_pm_fns->finish();
-}
-
-static struct platform_suspend_ops puv3_pm_ops = {
-	.valid		= puv3_pm_valid,
-	.enter		= puv3_pm_enter,
-	.prepare	= puv3_pm_prepare,
-	.finish		= puv3_pm_finish,
-};
-
-static int __init puv3_pm_init(void)
-{
-	if (!puv3_cpu_pm_fns) {
-		printk(KERN_ERR "no valid puv3_cpu_pm_fns defined\n");
-		return -EINVAL;
-	}
-
-	sleep_save = kmalloc_array(puv3_cpu_pm_fns->save_count,
-				   sizeof(unsigned long),
-				   GFP_KERNEL);
-	if (!sleep_save) {
-		printk(KERN_ERR "failed to alloc memory for pm save\n");
-		return -ENOMEM;
-	}
-
-	suspend_set_ops(&puv3_pm_ops);
-	return 0;
-}
-
-device_initcall(puv3_pm_init);
diff --git a/arch/unicore32/kernel/process.c b/arch/unicore32/kernel/process.c
deleted file mode 100644
index b4fd3a604a18..000000000000
--- a/arch/unicore32/kernel/process.c
+++ /dev/null
@@ -1,319 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/process.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <stdarg.h>
-
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/sched/debug.h>
-#include <linux/sched/task.h>
-#include <linux/sched/task_stack.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/stddef.h>
-#include <linux/unistd.h>
-#include <linux/delay.h>
-#include <linux/reboot.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/cpu.h>
-#include <linux/elfcore.h>
-#include <linux/pm.h>
-#include <linux/tick.h>
-#include <linux/utsname.h>
-#include <linux/uaccess.h>
-#include <linux/random.h>
-#include <linux/gpio.h>
-#include <linux/stacktrace.h>
-
-#include <asm/cacheflush.h>
-#include <asm/processor.h>
-#include <asm/stacktrace.h>
-
-#include "setup.h"
-
-static const char * const processor_modes[] = {
-	"UK00", "UK01", "UK02", "UK03", "UK04", "UK05", "UK06", "UK07",
-	"UK08", "UK09", "UK0A", "UK0B", "UK0C", "UK0D", "UK0E", "UK0F",
-	"USER", "REAL", "INTR", "PRIV", "UK14", "UK15", "UK16", "ABRT",
-	"UK18", "UK19", "UK1A", "EXTN", "UK1C", "UK1D", "UK1E", "SUSR"
-};
-
-void arch_cpu_idle(void)
-{
-	cpu_do_idle();
-	local_irq_enable();
-}
-
-void machine_halt(void)
-{
-	gpio_set_value(GPO_SOFT_OFF, 0);
-}
-
-/*
- * Function pointers to optional machine specific functions
- */
-void (*pm_power_off)(void) = NULL;
-EXPORT_SYMBOL(pm_power_off);
-
-void machine_power_off(void)
-{
-	if (pm_power_off)
-		pm_power_off();
-	machine_halt();
-}
-
-void machine_restart(char *cmd)
-{
-	/* Disable interrupts first */
-	local_irq_disable();
-
-	/*
-	 * Tell the mm system that we are going to reboot -
-	 * we may need it to insert some 1:1 mappings so that
-	 * soft boot works.
-	 */
-	setup_mm_for_reboot();
-
-	/* Clean and invalidate caches */
-	flush_cache_all();
-
-	/* Turn off caching */
-	cpu_proc_fin();
-
-	/* Push out any further dirty data, and ensure cache is empty */
-	flush_cache_all();
-
-	/*
-	 * Now handle reboot code.
-	 */
-	if (reboot_mode == REBOOT_SOFT) {
-		/* Jump into ROM at address 0xffff0000 */
-		cpu_reset(VECTORS_BASE);
-	} else {
-		writel(0x00002001, PM_PLLSYSCFG); /* cpu clk = 250M */
-		writel(0x00100800, PM_PLLDDRCFG); /* ddr clk =  44M */
-		writel(0x00002001, PM_PLLVGACFG); /* vga clk = 250M */
-
-		/* Use on-chip reset capability */
-		/* following instructions must be in one icache line */
-		__asm__ __volatile__(
-			"	.align 5\n\t"
-			"	stw	%1, [%0]\n\t"
-			"201:	ldw	r0, [%0]\n\t"
-			"	cmpsub.a	r0, #0\n\t"
-			"	bne	201b\n\t"
-			"	stw	%3, [%2]\n\t"
-			"	nop; nop; nop\n\t"
-			/* prefetch 3 instructions at most */
-			:
-			: "r" (PM_PMCR),
-			  "r" (PM_PMCR_CFBSYS | PM_PMCR_CFBDDR
-				| PM_PMCR_CFBVGA),
-			  "r" (RESETC_SWRR),
-			  "r" (RESETC_SWRR_SRB)
-			: "r0", "memory");
-	}
-
-	/*
-	 * Whoops - the architecture was unable to reboot.
-	 * Tell the user!
-	 */
-	mdelay(1000);
-	printk(KERN_EMERG "Reboot failed -- System halted\n");
-	do { } while (1);
-}
-
-void __show_regs(struct pt_regs *regs)
-{
-	unsigned long flags;
-	char buf[64];
-
-	show_regs_print_info(KERN_DEFAULT);
-	printk("PC is at %pS\n", (void *)instruction_pointer(regs));
-	printk("LR is at %pS\n", (void *)regs->UCreg_lr);
-	printk(KERN_DEFAULT "pc : [<%08lx>]    lr : [<%08lx>]    psr: %08lx\n"
-	       "sp : %08lx  ip : %08lx  fp : %08lx\n",
-		regs->UCreg_pc, regs->UCreg_lr, regs->UCreg_asr,
-		regs->UCreg_sp, regs->UCreg_ip, regs->UCreg_fp);
-	printk(KERN_DEFAULT "r26: %08lx  r25: %08lx  r24: %08lx\n",
-		regs->UCreg_26, regs->UCreg_25,
-		regs->UCreg_24);
-	printk(KERN_DEFAULT "r23: %08lx  r22: %08lx  r21: %08lx  r20: %08lx\n",
-		regs->UCreg_23, regs->UCreg_22,
-		regs->UCreg_21, regs->UCreg_20);
-	printk(KERN_DEFAULT "r19: %08lx  r18: %08lx  r17: %08lx  r16: %08lx\n",
-		regs->UCreg_19, regs->UCreg_18,
-		regs->UCreg_17, regs->UCreg_16);
-	printk(KERN_DEFAULT "r15: %08lx  r14: %08lx  r13: %08lx  r12: %08lx\n",
-		regs->UCreg_15, regs->UCreg_14,
-		regs->UCreg_13, regs->UCreg_12);
-	printk(KERN_DEFAULT "r11: %08lx  r10: %08lx  r9 : %08lx  r8 : %08lx\n",
-		regs->UCreg_11, regs->UCreg_10,
-		regs->UCreg_09, regs->UCreg_08);
-	printk(KERN_DEFAULT "r7 : %08lx  r6 : %08lx  r5 : %08lx  r4 : %08lx\n",
-		regs->UCreg_07, regs->UCreg_06,
-		regs->UCreg_05, regs->UCreg_04);
-	printk(KERN_DEFAULT "r3 : %08lx  r2 : %08lx  r1 : %08lx  r0 : %08lx\n",
-		regs->UCreg_03, regs->UCreg_02,
-		regs->UCreg_01, regs->UCreg_00);
-
-	flags = regs->UCreg_asr;
-	buf[0] = flags & PSR_S_BIT ? 'S' : 's';
-	buf[1] = flags & PSR_Z_BIT ? 'Z' : 'z';
-	buf[2] = flags & PSR_C_BIT ? 'C' : 'c';
-	buf[3] = flags & PSR_V_BIT ? 'V' : 'v';
-	buf[4] = '\0';
-
-	printk(KERN_DEFAULT "Flags: %s  INTR o%s  REAL o%s  Mode %s  Segment %s\n",
-		buf, interrupts_enabled(regs) ? "n" : "ff",
-		fast_interrupts_enabled(regs) ? "n" : "ff",
-		processor_modes[processor_mode(regs)],
-		uaccess_kernel() ? "kernel" : "user");
-	{
-		unsigned int ctrl;
-
-		buf[0] = '\0';
-		{
-			unsigned int transbase;
-			asm("movc %0, p0.c2, #0\n"
-			    : "=r" (transbase));
-			snprintf(buf, sizeof(buf), "  Table: %08x", transbase);
-		}
-		asm("movc %0, p0.c1, #0\n" : "=r" (ctrl));
-
-		printk(KERN_DEFAULT "Control: %08x%s\n", ctrl, buf);
-	}
-}
-
-void show_regs(struct pt_regs *regs)
-{
-	printk(KERN_DEFAULT "\n");
-	printk(KERN_DEFAULT "Pid: %d, comm: %20s\n",
-			task_pid_nr(current), current->comm);
-	__show_regs(regs);
-	__backtrace();
-}
-
-void flush_thread(void)
-{
-	struct thread_info *thread = current_thread_info();
-	struct task_struct *tsk = current;
-
-	memset(thread->used_cp, 0, sizeof(thread->used_cp));
-	memset(&tsk->thread.debug, 0, sizeof(struct debug_info));
-#ifdef CONFIG_UNICORE_FPU_F64
-	memset(&thread->fpstate, 0, sizeof(struct fp_state));
-#endif
-}
-
-void release_thread(struct task_struct *dead_task)
-{
-}
-
-asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");
-asmlinkage void ret_from_kernel_thread(void) __asm__("ret_from_kernel_thread");
-
-int
-copy_thread(unsigned long clone_flags, unsigned long stack_start,
-	    unsigned long stk_sz, struct task_struct *p)
-{
-	struct thread_info *thread = task_thread_info(p);
-	struct pt_regs *childregs = task_pt_regs(p);
-
-	memset(&thread->cpu_context, 0, sizeof(struct cpu_context_save));
-	thread->cpu_context.sp = (unsigned long)childregs;
-	if (unlikely(p->flags & PF_KTHREAD)) {
-		thread->cpu_context.pc = (unsigned long)ret_from_kernel_thread;
-		thread->cpu_context.r4 = stack_start;
-		thread->cpu_context.r5 = stk_sz;
-		memset(childregs, 0, sizeof(struct pt_regs));
-	} else {
-		thread->cpu_context.pc = (unsigned long)ret_from_fork;
-		*childregs = *current_pt_regs();
-		childregs->UCreg_00 = 0;
-		if (stack_start)
-			childregs->UCreg_sp = stack_start;
-
-		if (clone_flags & CLONE_SETTLS)
-			childregs->UCreg_16 = childregs->UCreg_03;
-	}
-	return 0;
-}
-
-/*
- * Fill in the task's elfregs structure for a core dump.
- */
-int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs)
-{
-	elf_core_copy_regs(elfregs, task_pt_regs(t));
-	return 1;
-}
-
-/*
- * fill in the fpe structure for a core dump...
- */
-int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fp)
-{
-	struct thread_info *thread = current_thread_info();
-	int used_math = thread->used_cp[1] | thread->used_cp[2];
-
-#ifdef CONFIG_UNICORE_FPU_F64
-	if (used_math)
-		memcpy(fp, &thread->fpstate, sizeof(*fp));
-#endif
-	return used_math != 0;
-}
-EXPORT_SYMBOL(dump_fpu);
-
-unsigned long get_wchan(struct task_struct *p)
-{
-	struct stackframe frame;
-	int count = 0;
-	if (!p || p == current || p->state == TASK_RUNNING)
-		return 0;
-
-	frame.fp = thread_saved_fp(p);
-	frame.sp = thread_saved_sp(p);
-	frame.lr = 0;			/* recovered from the stack */
-	frame.pc = thread_saved_pc(p);
-	do {
-		int ret = unwind_frame(&frame);
-		if (ret < 0)
-			return 0;
-		if (!in_sched_functions(frame.pc))
-			return frame.pc;
-	} while ((count++) < 16);
-	return 0;
-}
-
-unsigned long arch_randomize_brk(struct mm_struct *mm)
-{
-	return randomize_page(mm->brk, 0x02000000);
-}
-
-/*
- * The vectors page is always readable from user space for the
- * atomic helpers and the signal restart code.  Let's declare a mapping
- * for it so it is visible through ptrace and /proc/<pid>/mem.
- */
-
-int vectors_user_mapping(void)
-{
-	struct mm_struct *mm = current->mm;
-	return install_special_mapping(mm, 0xffff0000, PAGE_SIZE,
-				       VM_READ | VM_EXEC |
-				       VM_MAYREAD | VM_MAYEXEC |
-				       VM_DONTEXPAND | VM_DONTDUMP,
-				       NULL);
-}
-
-const char *arch_vma_name(struct vm_area_struct *vma)
-{
-	return (vma->vm_start == 0xffff0000) ? "[vectors]" : NULL;
-}
diff --git a/arch/unicore32/kernel/ptrace.c b/arch/unicore32/kernel/ptrace.c
deleted file mode 100644
index 0f216567b90a..000000000000
--- a/arch/unicore32/kernel/ptrace.c
+++ /dev/null
@@ -1,147 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/ptrace.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- *
- * By Ross Biro 1/23/92
- */
-#include <linux/kernel.h>
-#include <linux/ptrace.h>
-#include <linux/signal.h>
-#include <linux/uaccess.h>
-#include <linux/sched/task_stack.h>
-
-/*
- * this routine will get a word off of the processes privileged stack.
- * the offset is how far from the base addr as stored in the THREAD.
- * this routine assumes that all the privileged stacks are in our
- * data space.
- */
-static inline long get_user_reg(struct task_struct *task, int offset)
-{
-	return task_pt_regs(task)->uregs[offset];
-}
-
-/*
- * this routine will put a word on the processes privileged stack.
- * the offset is how far from the base addr as stored in the THREAD.
- * this routine assumes that all the privileged stacks are in our
- * data space.
- */
-static inline int
-put_user_reg(struct task_struct *task, int offset, long data)
-{
-	struct pt_regs newregs, *regs = task_pt_regs(task);
-	int ret = -EINVAL;
-
-	newregs = *regs;
-	newregs.uregs[offset] = data;
-
-	if (valid_user_regs(&newregs)) {
-		regs->uregs[offset] = data;
-		ret = 0;
-	}
-
-	return ret;
-}
-
-/*
- * Called by kernel/ptrace.c when detaching..
- */
-void ptrace_disable(struct task_struct *child)
-{
-}
-
-/*
- * We actually access the pt_regs stored on the kernel stack.
- */
-static int ptrace_read_user(struct task_struct *tsk, unsigned long off,
-			    unsigned long __user *ret)
-{
-	unsigned long tmp;
-
-	tmp = 0;
-	if (off < sizeof(struct pt_regs))
-		tmp = get_user_reg(tsk, off >> 2);
-
-	return put_user(tmp, ret);
-}
-
-/*
- * We actually access the pt_regs stored on the kernel stack.
- */
-static int ptrace_write_user(struct task_struct *tsk, unsigned long off,
-			     unsigned long val)
-{
-	if (off >= sizeof(struct pt_regs))
-		return 0;
-
-	return put_user_reg(tsk, off >> 2, val);
-}
-
-long arch_ptrace(struct task_struct *child, long request,
-		 unsigned long addr, unsigned long data)
-{
-	int ret;
-	unsigned long __user *datap = (unsigned long __user *) data;
-
-	switch (request) {
-	case PTRACE_PEEKUSR:
-		ret = ptrace_read_user(child, addr, datap);
-		break;
-
-	case PTRACE_POKEUSR:
-		ret = ptrace_write_user(child, addr, data);
-		break;
-
-	case PTRACE_GET_THREAD_AREA:
-		ret = put_user(task_pt_regs(child)->UCreg_16,
-			       datap);
-		break;
-
-	default:
-		ret = ptrace_request(child, request, addr, data);
-		break;
-	}
-
-	return ret;
-}
-
-asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno)
-{
-	unsigned long ip;
-
-	if (!test_thread_flag(TIF_SYSCALL_TRACE))
-		return scno;
-	if (!(current->ptrace & PT_PTRACED))
-		return scno;
-
-	/*
-	 * Save IP.  IP is used to denote syscall entry/exit:
-	 *  IP = 0 -> entry, = 1 -> exit
-	 */
-	ip = regs->UCreg_ip;
-	regs->UCreg_ip = why;
-
-	current_thread_info()->syscall = scno;
-
-	/* the 0x80 provides a way for the tracing parent to distinguish
-	   between a syscall stop and SIGTRAP delivery */
-	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
-				 ? 0x80 : 0));
-	/*
-	 * this isn't the same as continuing with a signal, but it will do
-	 * for normal use.  strace only continues with a signal if the
-	 * stopping signal is not SIGTRAP.  -brl
-	 */
-	if (current->exit_code) {
-		send_sig(current->exit_code, current, 1);
-		current->exit_code = 0;
-	}
-	regs->UCreg_ip = ip;
-
-	return current_thread_info()->syscall;
-}
diff --git a/arch/unicore32/kernel/puv3-core.c b/arch/unicore32/kernel/puv3-core.c
deleted file mode 100644
index 78f12e627365..000000000000
--- a/arch/unicore32/kernel/puv3-core.c
+++ /dev/null
@@ -1,276 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/unicore32/kernel/puv3-core.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- *	Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
- *	Copyright (C) 2001-2010 Guan Xuetao
- */
-
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/amba/bus.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/cnt32_to_63.h>
-#include <linux/usb/musb.h>
-
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <mach/pm.h>
-
-/*
- * This is the PKUnity sched_clock implementation.  This has
- * a resolution of 271ns, and a maximum value of 32025597s (370 days).
- *
- * The return value is guaranteed to be monotonic in that range as
- * long as there is always less than 582 seconds between successive
- * calls to this function.
- *
- *  ( * 1E9 / CLOCK_TICK_RATE ) -> about 2235/32
- */
-unsigned long long sched_clock(void)
-{
-	unsigned long long v = cnt32_to_63(readl(OST_OSCR));
-
-	/* original conservative method, but overflow frequently
-	 * v *= NSEC_PER_SEC >> 12;
-	 * do_div(v, CLOCK_TICK_RATE >> 12);
-	 */
-	v = ((v & 0x7fffffffffffffffULL) * 2235) >> 5;
-
-	return v;
-}
-
-static struct resource puv3_usb_resources[] = {
-	/* order is significant! */
-	{
-		.start		= io_v2p(PKUNITY_USB_BASE),
-		.end		= io_v2p(PKUNITY_USB_BASE) + 0x3ff,
-		.flags		= IORESOURCE_MEM,
-	}, {
-		.start		= IRQ_USB,
-		.flags		= IORESOURCE_IRQ,
-	}, {
-		.start		= IRQ_USB,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct musb_hdrc_config	puv3_usb_config[] = {
-	{
-		.num_eps = 16,
-		.multipoint = 1,
-#ifdef CONFIG_USB_INVENTRA_DMA
-		.dma = 1,
-		.dma_channels = 8,
-#endif
-	},
-};
-
-static struct musb_hdrc_platform_data puv3_usb_plat = {
-	.mode		= MUSB_HOST,
-	.min_power	= 100,
-	.clock		= 0,
-	.config		= puv3_usb_config,
-};
-
-static struct resource puv3_mmc_resources[] = {
-	[0] = {
-		.start	= io_v2p(PKUNITY_SDC_BASE),
-		.end	= io_v2p(PKUNITY_SDC_BASE) + 0xfff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_SDC,
-		.end	= IRQ_SDC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource puv3_unigfx_resources[] = {
-	[0] = {
-		.start	= io_v2p(PKUNITY_UNIGFX_BASE),
-		.end	= io_v2p(PKUNITY_UNIGFX_BASE) + 0xfff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct resource puv3_rtc_resources[] = {
-	[0] = {
-		.start = io_v2p(PKUNITY_RTC_BASE),
-		.end   = io_v2p(PKUNITY_RTC_BASE) + 0xff,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_RTCAlarm,
-		.end   = IRQ_RTCAlarm,
-		.flags = IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start = IRQ_RTC,
-		.end   = IRQ_RTC,
-		.flags = IORESOURCE_IRQ
-	}
-};
-
-static struct resource puv3_pwm_resources[] = {
-	[0] = {
-		.start	= io_v2p(PKUNITY_OST_BASE) + 0x80,
-		.end	= io_v2p(PKUNITY_OST_BASE) + 0xff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct resource puv3_uart0_resources[] = {
-	[0] = {
-		.start = io_v2p(PKUNITY_UART0_BASE),
-		.end   = io_v2p(PKUNITY_UART0_BASE) + 0xff,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_UART0,
-		.end   = IRQ_UART0,
-		.flags = IORESOURCE_IRQ
-	}
-};
-
-static struct resource puv3_uart1_resources[] = {
-	[0] = {
-		.start = io_v2p(PKUNITY_UART1_BASE),
-		.end   = io_v2p(PKUNITY_UART1_BASE) + 0xff,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_UART1,
-		.end   = IRQ_UART1,
-		.flags = IORESOURCE_IRQ
-	}
-};
-
-static struct resource puv3_umal_resources[] = {
-	[0] = {
-		.start = io_v2p(PKUNITY_UMAL_BASE),
-		.end   = io_v2p(PKUNITY_UMAL_BASE) + 0x1fff,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_UMAL,
-		.end   = IRQ_UMAL,
-		.flags = IORESOURCE_IRQ
-	}
-};
-
-#ifdef CONFIG_PUV3_PM
-
-#define SAVE(x)		sleep_save[SLEEP_SAVE_##x] = x
-#define RESTORE(x)	x = sleep_save[SLEEP_SAVE_##x]
-
-/*
- * List of global PXA peripheral registers to preserve.
- * More ones like CP and general purpose register values are preserved
- * with the stack pointer in sleep.S.
- */
-enum {
-	SLEEP_SAVE_PM_PLLDDRCFG,
-	SLEEP_SAVE_COUNT
-};
-
-
-static void puv3_cpu_pm_save(unsigned long *sleep_save)
-{
-/*	SAVE(PM_PLLDDRCFG); */
-}
-
-static void puv3_cpu_pm_restore(unsigned long *sleep_save)
-{
-/*	RESTORE(PM_PLLDDRCFG); */
-}
-
-static int puv3_cpu_pm_prepare(void)
-{
-	/* set resume return address */
-	writel(virt_to_phys(puv3_cpu_resume), PM_DIVCFG);
-	return 0;
-}
-
-static void puv3_cpu_pm_enter(suspend_state_t state)
-{
-	/* Clear reset status */
-	writel(RESETC_RSSR_HWR | RESETC_RSSR_WDR
-			| RESETC_RSSR_SMR | RESETC_RSSR_SWR, RESETC_RSSR);
-
-	switch (state) {
-/*	case PM_SUSPEND_ON:
-		puv3_cpu_idle();
-		break; */
-	case PM_SUSPEND_MEM:
-		puv3_cpu_pm_prepare();
-		puv3_cpu_suspend(PM_PMCR_SFB);
-		break;
-	}
-}
-
-static int puv3_cpu_pm_valid(suspend_state_t state)
-{
-	return state == PM_SUSPEND_MEM;
-}
-
-static void puv3_cpu_pm_finish(void)
-{
-	/* ensure not to come back here if it wasn't intended */
-	/* PSPR = 0; */
-}
-
-static struct puv3_cpu_pm_fns puv3_cpu_pm_fnss = {
-	.save_count	= SLEEP_SAVE_COUNT,
-	.valid		= puv3_cpu_pm_valid,
-	.save		= puv3_cpu_pm_save,
-	.restore	= puv3_cpu_pm_restore,
-	.enter		= puv3_cpu_pm_enter,
-	.prepare	= puv3_cpu_pm_prepare,
-	.finish		= puv3_cpu_pm_finish,
-};
-
-static void __init puv3_init_pm(void)
-{
-	puv3_cpu_pm_fns = &puv3_cpu_pm_fnss;
-}
-#else
-static inline void puv3_init_pm(void) {}
-#endif
-
-void puv3_ps2_init(void)
-{
-	struct clk *bclk32;
-
-	bclk32 = clk_get(NULL, "BUS32_CLK");
-	writel(clk_get_rate(bclk32) / 200000, PS2_CNT); /* should > 5us */
-}
-
-void __init puv3_core_init(void)
-{
-	puv3_init_pm();
-	puv3_ps2_init();
-
-	platform_device_register_simple("PKUnity-v3-RTC", -1,
-			puv3_rtc_resources, ARRAY_SIZE(puv3_rtc_resources));
-	platform_device_register_simple("PKUnity-v3-UMAL", -1,
-			puv3_umal_resources, ARRAY_SIZE(puv3_umal_resources));
-	platform_device_register_simple("PKUnity-v3-MMC", -1,
-			puv3_mmc_resources, ARRAY_SIZE(puv3_mmc_resources));
-	platform_device_register_simple("PKUnity-v3-UNIGFX", -1,
-			puv3_unigfx_resources, ARRAY_SIZE(puv3_unigfx_resources));
-	platform_device_register_simple("PKUnity-v3-PWM", -1,
-			puv3_pwm_resources, ARRAY_SIZE(puv3_pwm_resources));
-	platform_device_register_simple("PKUnity-v3-UART", 0,
-			puv3_uart0_resources, ARRAY_SIZE(puv3_uart0_resources));
-	platform_device_register_simple("PKUnity-v3-UART", 1,
-			puv3_uart1_resources, ARRAY_SIZE(puv3_uart1_resources));
-	platform_device_register_simple("PKUnity-v3-AC97", -1, NULL, 0);
-	platform_device_register_resndata(NULL, "musb_hdrc", -1,
-			puv3_usb_resources, ARRAY_SIZE(puv3_usb_resources),
-			&puv3_usb_plat, sizeof(puv3_usb_plat));
-}
-
diff --git a/arch/unicore32/kernel/puv3-nb0916.c b/arch/unicore32/kernel/puv3-nb0916.c
deleted file mode 100644
index e251f5028396..000000000000
--- a/arch/unicore32/kernel/puv3-nb0916.c
+++ /dev/null
@@ -1,147 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/puv3-nb0916.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- *	Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
- *	Copyright (C) 2001-2010 Guan Xuetao
- */
-
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/io.h>
-#include <linux/reboot.h>
-#include <linux/interrupt.h>
-#include <linux/i2c.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-
-#include <mach/hardware.h>
-
-static struct physmap_flash_data physmap_flash_data = {
-	.width		= 1,
-};
-
-static struct resource physmap_flash_resource = {
-	.start		= 0xFFF80000,
-	.end		= 0xFFFFFFFF,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct resource puv3_i2c_resources[] = {
-	[0] = {
-		.start = io_v2p(PKUNITY_I2C_BASE),
-		.end   = io_v2p(PKUNITY_I2C_BASE) + 0xff,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_I2C,
-		.end   = IRQ_I2C,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static struct pwm_lookup nb0916_pwm_lookup[] = {
-	PWM_LOOKUP("PKUnity-v3-PWM", 0, "pwm-backlight", NULL, 70 * 1024,
-		   PWM_POLARITY_NORMAL),
-};
-
-static struct platform_pwm_backlight_data nb0916_backlight_data = {
-	.max_brightness	= 100,
-	.dft_brightness	= 100,
-};
-
-static struct gpio_keys_button nb0916_gpio_keys[] = {
-	{
-		.type	= EV_KEY,
-		.code	= KEY_POWER,
-		.gpio	= GPI_SOFF_REQ,
-		.desc	= "Power Button",
-		.wakeup = 1,
-		.active_low = 1,
-	},
-	{
-		.type	= EV_KEY,
-		.code	= BTN_TOUCH,
-		.gpio	= GPI_BTN_TOUCH,
-		.desc	= "Touchpad Button",
-		.wakeup = 1,
-		.active_low = 1,
-	},
-};
-
-static struct gpio_keys_platform_data nb0916_gpio_button_data = {
-	.buttons	= nb0916_gpio_keys,
-	.nbuttons	= ARRAY_SIZE(nb0916_gpio_keys),
-};
-
-static irqreturn_t nb0916_lcdcaseoff_handler(int irq, void *dev_id)
-{
-	if (gpio_get_value(GPI_LCD_CASE_OFF))
-		gpio_set_value(GPO_LCD_EN, 1);
-	else
-		gpio_set_value(GPO_LCD_EN, 0);
-
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t nb0916_overheat_handler(int irq, void *dev_id)
-{
-	machine_halt();
-	/* SYSTEM HALT, NO RETURN */
-	return IRQ_HANDLED;
-}
-
-static struct i2c_board_info __initdata puv3_i2c_devices[] = {
-	{	I2C_BOARD_INFO("lm75",		I2C_TAR_THERMAL),	},
-	{	I2C_BOARD_INFO("bq27200",	I2C_TAR_PWIC),		},
-	{	I2C_BOARD_INFO("24c02",		I2C_TAR_EEPROM),	},
-};
-
-int __init mach_nb0916_init(void)
-{
-	i2c_register_board_info(0, puv3_i2c_devices,
-			ARRAY_SIZE(puv3_i2c_devices));
-
-	platform_device_register_simple("PKUnity-v3-I2C", -1,
-			puv3_i2c_resources, ARRAY_SIZE(puv3_i2c_resources));
-
-	pwm_add_table(nb0916_pwm_lookup, ARRAY_SIZE(nb0916_pwm_lookup));
-
-	platform_device_register_data(NULL, "pwm-backlight", -1,
-			&nb0916_backlight_data, sizeof(nb0916_backlight_data));
-
-	platform_device_register_data(NULL, "gpio-keys", -1,
-			&nb0916_gpio_button_data, sizeof(nb0916_gpio_button_data));
-
-	platform_device_register_resndata(NULL, "physmap-flash", -1,
-			&physmap_flash_resource, 1,
-			&physmap_flash_data, sizeof(physmap_flash_data));
-
-	if (request_irq(gpio_to_irq(GPI_LCD_CASE_OFF),
-		&nb0916_lcdcaseoff_handler,
-		IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-		"NB0916 lcd case off", NULL) < 0) {
-
-		printk(KERN_DEBUG "LCD-Case-OFF IRQ %d not available\n",
-			gpio_to_irq(GPI_LCD_CASE_OFF));
-	}
-
-	if (request_irq(gpio_to_irq(GPI_OTP_INT), &nb0916_overheat_handler,
-		IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-		"NB0916 overheating protection", NULL) < 0) {
-
-		printk(KERN_DEBUG "Overheating Protection IRQ %d not available\n",
-			gpio_to_irq(GPI_OTP_INT));
-	}
-
-	return 0;
-}
-
-subsys_initcall_sync(mach_nb0916_init);
diff --git a/arch/unicore32/kernel/setup.c b/arch/unicore32/kernel/setup.c
deleted file mode 100644
index 0c4242a5ee1d..000000000000
--- a/arch/unicore32/kernel/setup.c
+++ /dev/null
@@ -1,352 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/setup.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/stddef.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/utsname.h>
-#include <linux/initrd.h>
-#include <linux/console.h>
-#include <linux/memblock.h>
-#include <linux/seq_file.h>
-#include <linux/screen_info.h>
-#include <linux/init.h>
-#include <linux/root_dev.h>
-#include <linux/cpu.h>
-#include <linux/interrupt.h>
-#include <linux/smp.h>
-#include <linux/fs.h>
-#include <linux/proc_fs.h>
-#include <linux/elf.h>
-#include <linux/io.h>
-
-#include <asm/cputype.h>
-#include <asm/sections.h>
-#include <asm/setup.h>
-#include <asm/cacheflush.h>
-#include <asm/tlbflush.h>
-#include <asm/traps.h>
-#include <asm/memblock.h>
-
-#include "setup.h"
-
-#ifndef MEM_SIZE
-#define MEM_SIZE	(16*1024*1024)
-#endif
-
-struct stack {
-	u32 irq[3];
-	u32 abt[3];
-	u32 und[3];
-} ____cacheline_aligned;
-
-static struct stack stacks[NR_CPUS];
-
-#ifdef CONFIG_VGA_CONSOLE
-struct screen_info screen_info;
-#endif
-
-char elf_platform[ELF_PLATFORM_SIZE];
-EXPORT_SYMBOL(elf_platform);
-
-static char __initdata cmd_line[COMMAND_LINE_SIZE];
-
-static char default_command_line[COMMAND_LINE_SIZE] __initdata = CONFIG_CMDLINE;
-
-/*
- * Standard memory resources
- */
-static struct resource mem_res[] = {
-	{
-		.name = "Kernel code",
-		.start = 0,
-		.end = 0,
-		.flags = IORESOURCE_SYSTEM_RAM
-	},
-	{
-		.name = "Kernel data",
-		.start = 0,
-		.end = 0,
-		.flags = IORESOURCE_SYSTEM_RAM
-	}
-};
-
-#define kernel_code mem_res[0]
-#define kernel_data mem_res[1]
-
-/*
- * These functions re-use the assembly code in head.S, which
- * already provide the required functionality.
- */
-static void __init setup_processor(void)
-{
-	printk(KERN_DEFAULT "CPU: UniCore-II [%08x] revision %d, cr=%08lx\n",
-	       uc32_cpuid, (int)(uc32_cpuid >> 16) & 15, cr_alignment);
-
-	sprintf(init_utsname()->machine, "puv3");
-	sprintf(elf_platform, "ucv2");
-}
-
-/*
- * cpu_init - initialise one CPU.
- *
- * cpu_init sets up the per-CPU stacks.
- */
-void cpu_init(void)
-{
-	unsigned int cpu = smp_processor_id();
-	struct stack *stk = &stacks[cpu];
-
-	/*
-	 * setup stacks for re-entrant exception handlers
-	 */
-	__asm__ (
-	"mov.a	asr, %1\n\t"
-	"add	sp, %0, %2\n\t"
-	"mov.a	asr, %3\n\t"
-	"add	sp, %0, %4\n\t"
-	"mov.a	asr, %5\n\t"
-	"add	sp, %0, %6\n\t"
-	"mov.a	asr, %7"
-	    :
-	    : "r" (stk),
-	      "r" (PSR_R_BIT | PSR_I_BIT | INTR_MODE),
-	      "I" (offsetof(struct stack, irq[0])),
-	      "r" (PSR_R_BIT | PSR_I_BIT | ABRT_MODE),
-	      "I" (offsetof(struct stack, abt[0])),
-	      "r" (PSR_R_BIT | PSR_I_BIT | EXTN_MODE),
-	      "I" (offsetof(struct stack, und[0])),
-	      "r" (PSR_R_BIT | PSR_I_BIT | PRIV_MODE)
-	: "r30", "cc");
-}
-
-static int __init uc32_add_memory(unsigned long start, unsigned long size)
-{
-	struct membank *bank = &meminfo.bank[meminfo.nr_banks];
-
-	if (meminfo.nr_banks >= NR_BANKS) {
-		printk(KERN_CRIT "NR_BANKS too low, "
-			"ignoring memory at %#lx\n", start);
-		return -EINVAL;
-	}
-
-	/*
-	 * Ensure that start/size are aligned to a page boundary.
-	 * Size is appropriately rounded down, start is rounded up.
-	 */
-	size -= start & ~PAGE_MASK;
-
-	bank->start = PAGE_ALIGN(start);
-	bank->size  = size & PAGE_MASK;
-
-	/*
-	 * Check whether this memory region has non-zero size or
-	 * invalid node number.
-	 */
-	if (bank->size == 0)
-		return -EINVAL;
-
-	meminfo.nr_banks++;
-	return 0;
-}
-
-/*
- * Pick out the memory size.  We look for mem=size@start,
- * where start and size are "size[KkMm]"
- */
-static int __init early_mem(char *p)
-{
-	static int usermem __initdata = 1;
-	unsigned long size, start;
-	char *endp;
-
-	/*
-	 * If the user specifies memory size, we
-	 * blow away any automatically generated
-	 * size.
-	 */
-	if (usermem) {
-		usermem = 0;
-		meminfo.nr_banks = 0;
-	}
-
-	start = PHYS_OFFSET;
-	size  = memparse(p, &endp);
-	if (*endp == '@')
-		start = memparse(endp + 1, NULL);
-
-	uc32_add_memory(start, size);
-
-	return 0;
-}
-early_param("mem", early_mem);
-
-static void __init
-request_standard_resources(struct meminfo *mi)
-{
-	struct resource *res;
-	int i;
-
-	kernel_code.start   = virt_to_phys(_stext);
-	kernel_code.end     = virt_to_phys(_etext - 1);
-	kernel_data.start   = virt_to_phys(_sdata);
-	kernel_data.end     = virt_to_phys(_end - 1);
-
-	for (i = 0; i < mi->nr_banks; i++) {
-		if (mi->bank[i].size == 0)
-			continue;
-
-		res = memblock_alloc_low(sizeof(*res), SMP_CACHE_BYTES);
-		if (!res)
-			panic("%s: Failed to allocate %zu bytes align=%x\n",
-			      __func__, sizeof(*res), SMP_CACHE_BYTES);
-
-		res->name  = "System RAM";
-		res->start = mi->bank[i].start;
-		res->end   = mi->bank[i].start + mi->bank[i].size - 1;
-		res->flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY;
-
-		request_resource(&iomem_resource, res);
-
-		if (kernel_code.start >= res->start &&
-		    kernel_code.end <= res->end)
-			request_resource(res, &kernel_code);
-		if (kernel_data.start >= res->start &&
-		    kernel_data.end <= res->end)
-			request_resource(res, &kernel_data);
-	}
-}
-
-static void (*init_machine)(void) __initdata;
-
-static int __init customize_machine(void)
-{
-	/* customizes platform devices, or adds new ones */
-	if (init_machine)
-		init_machine();
-	return 0;
-}
-arch_initcall(customize_machine);
-
-void __init setup_arch(char **cmdline_p)
-{
-	char *from = default_command_line;
-
-	setup_processor();
-
-	init_mm.start_code = (unsigned long) _stext;
-	init_mm.end_code   = (unsigned long) _etext;
-	init_mm.end_data   = (unsigned long) _edata;
-	init_mm.brk	   = (unsigned long) _end;
-
-	/* parse_early_param needs a boot_command_line */
-	strlcpy(boot_command_line, from, COMMAND_LINE_SIZE);
-
-	/* populate cmd_line too for later use, preserving boot_command_line */
-	strlcpy(cmd_line, boot_command_line, COMMAND_LINE_SIZE);
-	*cmdline_p = cmd_line;
-
-	parse_early_param();
-
-	uc32_memblock_init(&meminfo);
-
-	paging_init();
-	request_standard_resources(&meminfo);
-
-	cpu_init();
-
-	/*
-	 * Set up various architecture-specific pointers
-	 */
-	init_machine = puv3_core_init;
-
-#ifdef CONFIG_VT
-#if defined(CONFIG_VGA_CONSOLE)
-	conswitchp = &vga_con;
-#endif
-#endif
-	early_trap_init();
-}
-
-static struct cpu cpuinfo_unicore;
-
-static int __init topology_init(void)
-{
-	int i;
-
-	for_each_possible_cpu(i)
-		register_cpu(&cpuinfo_unicore, i);
-
-	return 0;
-}
-subsys_initcall(topology_init);
-
-#ifdef CONFIG_HAVE_PROC_CPU
-static int __init proc_cpu_init(void)
-{
-	struct proc_dir_entry *res;
-
-	res = proc_mkdir("cpu", NULL);
-	if (!res)
-		return -ENOMEM;
-	return 0;
-}
-fs_initcall(proc_cpu_init);
-#endif
-
-static int c_show(struct seq_file *m, void *v)
-{
-	seq_printf(m, "Processor\t: UniCore-II rev %d (%s)\n",
-		   (int)(uc32_cpuid >> 16) & 15, elf_platform);
-
-	seq_printf(m, "BogoMIPS\t: %lu.%02lu\n",
-		   loops_per_jiffy / (500000/HZ),
-		   (loops_per_jiffy / (5000/HZ)) % 100);
-
-	/* dump out the processor features */
-	seq_puts(m, "Features\t: CMOV UC-F64");
-
-	seq_printf(m, "\nCPU implementer\t: 0x%02x\n", uc32_cpuid >> 24);
-	seq_printf(m, "CPU architecture: 2\n");
-	seq_printf(m, "CPU revision\t: %d\n", (uc32_cpuid >> 16) & 15);
-
-	seq_printf(m, "Cache type\t: write-back\n"
-			"Cache clean\t: cp0 c5 ops\n"
-			"Cache lockdown\t: not support\n"
-			"Cache format\t: Harvard\n");
-
-	seq_puts(m, "\n");
-
-	seq_printf(m, "Hardware\t: PKUnity v3\n");
-
-	return 0;
-}
-
-static void *c_start(struct seq_file *m, loff_t *pos)
-{
-	return *pos < 1 ? (void *)1 : NULL;
-}
-
-static void *c_next(struct seq_file *m, void *v, loff_t *pos)
-{
-	++*pos;
-	return NULL;
-}
-
-static void c_stop(struct seq_file *m, void *v)
-{
-}
-
-const struct seq_operations cpuinfo_op = {
-	.start	= c_start,
-	.next	= c_next,
-	.stop	= c_stop,
-	.show	= c_show
-};
diff --git a/arch/unicore32/kernel/setup.h b/arch/unicore32/kernel/setup.h
deleted file mode 100644
index 967352323185..000000000000
--- a/arch/unicore32/kernel/setup.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/kernel/setup.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#ifndef __UNICORE_KERNEL_SETUP_H__
-#define __UNICORE_KERNEL_SETUP_H__
-
-#include <asm/hwdef-copro.h>
-
-extern void paging_init(void);
-extern void puv3_core_init(void);
-extern void cpu_init(void);
-
-extern void puv3_ps2_init(void);
-extern void pci_puv3_preinit(void);
-extern void __init puv3_init_gpio(void);
-
-extern void setup_mm_for_reboot(void);
-
-extern char __stubs_start[], __stubs_end[];
-extern char __vectors_start[], __vectors_end[];
-
-extern void kernel_thread_helper(void);
-
-extern void __init early_signal_init(void);
-
-extern asmlinkage void __backtrace(void);
-extern asmlinkage void c_backtrace(unsigned long fp, const char *loglvl);
-
-extern void __show_regs(struct pt_regs *);
-
-#endif
diff --git a/arch/unicore32/kernel/signal.c b/arch/unicore32/kernel/signal.c
deleted file mode 100644
index 3946182a835d..000000000000
--- a/arch/unicore32/kernel/signal.c
+++ /dev/null
@@ -1,424 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/signal.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/personality.h>
-#include <linux/uaccess.h>
-#include <linux/tracehook.h>
-#include <linux/elf.h>
-#include <linux/unistd.h>
-
-#include <asm/cacheflush.h>
-#include <asm/ucontext.h>
-
-/*
- * For UniCore syscalls, we encode the syscall number into the instruction.
- */
-#define SWI_SYS_SIGRETURN	(0xff000000) /* error number for new abi */
-#define SWI_SYS_RT_SIGRETURN	(0xff000000 | (__NR_rt_sigreturn))
-#define SWI_SYS_RESTART		(0xff000000 | (__NR_restart_syscall))
-
-#define KERN_SIGRETURN_CODE	(KUSER_VECPAGE_BASE + 0x00000500)
-#define KERN_RESTART_CODE	(KERN_SIGRETURN_CODE + sizeof(sigreturn_codes))
-
-const unsigned long sigreturn_codes[3] = {
-	SWI_SYS_SIGRETURN, SWI_SYS_RT_SIGRETURN,
-};
-
-const unsigned long syscall_restart_code[2] = {
-	SWI_SYS_RESTART,	/* swi	__NR_restart_syscall */
-	0x69efc004,		/* ldr	pc, [sp], #4 */
-};
-
-/*
- * Do a signal return; undo the signal stack.  These are aligned to 64-bit.
- */
-struct sigframe {
-	struct ucontext uc;
-	unsigned long retcode[2];
-};
-
-struct rt_sigframe {
-	struct siginfo info;
-	struct sigframe sig;
-};
-
-static int restore_sigframe(struct pt_regs *regs, struct sigframe __user *sf)
-{
-	sigset_t set;
-	int err;
-
-	err = __copy_from_user(&set, &sf->uc.uc_sigmask, sizeof(set));
-	if (err == 0)
-		set_current_blocked(&set);
-
-	err |= __get_user(regs->UCreg_00, &sf->uc.uc_mcontext.regs.UCreg_00);
-	err |= __get_user(regs->UCreg_01, &sf->uc.uc_mcontext.regs.UCreg_01);
-	err |= __get_user(regs->UCreg_02, &sf->uc.uc_mcontext.regs.UCreg_02);
-	err |= __get_user(regs->UCreg_03, &sf->uc.uc_mcontext.regs.UCreg_03);
-	err |= __get_user(regs->UCreg_04, &sf->uc.uc_mcontext.regs.UCreg_04);
-	err |= __get_user(regs->UCreg_05, &sf->uc.uc_mcontext.regs.UCreg_05);
-	err |= __get_user(regs->UCreg_06, &sf->uc.uc_mcontext.regs.UCreg_06);
-	err |= __get_user(regs->UCreg_07, &sf->uc.uc_mcontext.regs.UCreg_07);
-	err |= __get_user(regs->UCreg_08, &sf->uc.uc_mcontext.regs.UCreg_08);
-	err |= __get_user(regs->UCreg_09, &sf->uc.uc_mcontext.regs.UCreg_09);
-	err |= __get_user(regs->UCreg_10, &sf->uc.uc_mcontext.regs.UCreg_10);
-	err |= __get_user(regs->UCreg_11, &sf->uc.uc_mcontext.regs.UCreg_11);
-	err |= __get_user(regs->UCreg_12, &sf->uc.uc_mcontext.regs.UCreg_12);
-	err |= __get_user(regs->UCreg_13, &sf->uc.uc_mcontext.regs.UCreg_13);
-	err |= __get_user(regs->UCreg_14, &sf->uc.uc_mcontext.regs.UCreg_14);
-	err |= __get_user(regs->UCreg_15, &sf->uc.uc_mcontext.regs.UCreg_15);
-	err |= __get_user(regs->UCreg_16, &sf->uc.uc_mcontext.regs.UCreg_16);
-	err |= __get_user(regs->UCreg_17, &sf->uc.uc_mcontext.regs.UCreg_17);
-	err |= __get_user(regs->UCreg_18, &sf->uc.uc_mcontext.regs.UCreg_18);
-	err |= __get_user(regs->UCreg_19, &sf->uc.uc_mcontext.regs.UCreg_19);
-	err |= __get_user(regs->UCreg_20, &sf->uc.uc_mcontext.regs.UCreg_20);
-	err |= __get_user(regs->UCreg_21, &sf->uc.uc_mcontext.regs.UCreg_21);
-	err |= __get_user(regs->UCreg_22, &sf->uc.uc_mcontext.regs.UCreg_22);
-	err |= __get_user(regs->UCreg_23, &sf->uc.uc_mcontext.regs.UCreg_23);
-	err |= __get_user(regs->UCreg_24, &sf->uc.uc_mcontext.regs.UCreg_24);
-	err |= __get_user(regs->UCreg_25, &sf->uc.uc_mcontext.regs.UCreg_25);
-	err |= __get_user(regs->UCreg_26, &sf->uc.uc_mcontext.regs.UCreg_26);
-	err |= __get_user(regs->UCreg_fp, &sf->uc.uc_mcontext.regs.UCreg_fp);
-	err |= __get_user(regs->UCreg_ip, &sf->uc.uc_mcontext.regs.UCreg_ip);
-	err |= __get_user(regs->UCreg_sp, &sf->uc.uc_mcontext.regs.UCreg_sp);
-	err |= __get_user(regs->UCreg_lr, &sf->uc.uc_mcontext.regs.UCreg_lr);
-	err |= __get_user(regs->UCreg_pc, &sf->uc.uc_mcontext.regs.UCreg_pc);
-	err |= __get_user(regs->UCreg_asr, &sf->uc.uc_mcontext.regs.UCreg_asr);
-
-	err |= !valid_user_regs(regs);
-
-	return err;
-}
-
-asmlinkage int __sys_rt_sigreturn(struct pt_regs *regs)
-{
-	struct rt_sigframe __user *frame;
-
-	/* Always make any pending restarted system calls return -EINTR */
-	current->restart_block.fn = do_no_restart_syscall;
-
-	/*
-	 * Since we stacked the signal on a 64-bit boundary,
-	 * then 'sp' should be word aligned here.  If it's
-	 * not, then the user is trying to mess with us.
-	 */
-	if (regs->UCreg_sp & 7)
-		goto badframe;
-
-	frame = (struct rt_sigframe __user *)regs->UCreg_sp;
-
-	if (!access_ok(frame, sizeof(*frame)))
-		goto badframe;
-
-	if (restore_sigframe(regs, &frame->sig))
-		goto badframe;
-
-	if (restore_altstack(&frame->sig.uc.uc_stack))
-		goto badframe;
-
-	return regs->UCreg_00;
-
-badframe:
-	force_sig(SIGSEGV);
-	return 0;
-}
-
-static int setup_sigframe(struct sigframe __user *sf, struct pt_regs *regs,
-		sigset_t *set)
-{
-	int err = 0;
-
-	err |= __put_user(regs->UCreg_00, &sf->uc.uc_mcontext.regs.UCreg_00);
-	err |= __put_user(regs->UCreg_01, &sf->uc.uc_mcontext.regs.UCreg_01);
-	err |= __put_user(regs->UCreg_02, &sf->uc.uc_mcontext.regs.UCreg_02);
-	err |= __put_user(regs->UCreg_03, &sf->uc.uc_mcontext.regs.UCreg_03);
-	err |= __put_user(regs->UCreg_04, &sf->uc.uc_mcontext.regs.UCreg_04);
-	err |= __put_user(regs->UCreg_05, &sf->uc.uc_mcontext.regs.UCreg_05);
-	err |= __put_user(regs->UCreg_06, &sf->uc.uc_mcontext.regs.UCreg_06);
-	err |= __put_user(regs->UCreg_07, &sf->uc.uc_mcontext.regs.UCreg_07);
-	err |= __put_user(regs->UCreg_08, &sf->uc.uc_mcontext.regs.UCreg_08);
-	err |= __put_user(regs->UCreg_09, &sf->uc.uc_mcontext.regs.UCreg_09);
-	err |= __put_user(regs->UCreg_10, &sf->uc.uc_mcontext.regs.UCreg_10);
-	err |= __put_user(regs->UCreg_11, &sf->uc.uc_mcontext.regs.UCreg_11);
-	err |= __put_user(regs->UCreg_12, &sf->uc.uc_mcontext.regs.UCreg_12);
-	err |= __put_user(regs->UCreg_13, &sf->uc.uc_mcontext.regs.UCreg_13);
-	err |= __put_user(regs->UCreg_14, &sf->uc.uc_mcontext.regs.UCreg_14);
-	err |= __put_user(regs->UCreg_15, &sf->uc.uc_mcontext.regs.UCreg_15);
-	err |= __put_user(regs->UCreg_16, &sf->uc.uc_mcontext.regs.UCreg_16);
-	err |= __put_user(regs->UCreg_17, &sf->uc.uc_mcontext.regs.UCreg_17);
-	err |= __put_user(regs->UCreg_18, &sf->uc.uc_mcontext.regs.UCreg_18);
-	err |= __put_user(regs->UCreg_19, &sf->uc.uc_mcontext.regs.UCreg_19);
-	err |= __put_user(regs->UCreg_20, &sf->uc.uc_mcontext.regs.UCreg_20);
-	err |= __put_user(regs->UCreg_21, &sf->uc.uc_mcontext.regs.UCreg_21);
-	err |= __put_user(regs->UCreg_22, &sf->uc.uc_mcontext.regs.UCreg_22);
-	err |= __put_user(regs->UCreg_23, &sf->uc.uc_mcontext.regs.UCreg_23);
-	err |= __put_user(regs->UCreg_24, &sf->uc.uc_mcontext.regs.UCreg_24);
-	err |= __put_user(regs->UCreg_25, &sf->uc.uc_mcontext.regs.UCreg_25);
-	err |= __put_user(regs->UCreg_26, &sf->uc.uc_mcontext.regs.UCreg_26);
-	err |= __put_user(regs->UCreg_fp, &sf->uc.uc_mcontext.regs.UCreg_fp);
-	err |= __put_user(regs->UCreg_ip, &sf->uc.uc_mcontext.regs.UCreg_ip);
-	err |= __put_user(regs->UCreg_sp, &sf->uc.uc_mcontext.regs.UCreg_sp);
-	err |= __put_user(regs->UCreg_lr, &sf->uc.uc_mcontext.regs.UCreg_lr);
-	err |= __put_user(regs->UCreg_pc, &sf->uc.uc_mcontext.regs.UCreg_pc);
-	err |= __put_user(regs->UCreg_asr, &sf->uc.uc_mcontext.regs.UCreg_asr);
-
-	err |= __put_user(current->thread.trap_no,
-			&sf->uc.uc_mcontext.trap_no);
-	err |= __put_user(current->thread.error_code,
-			&sf->uc.uc_mcontext.error_code);
-	err |= __put_user(current->thread.address,
-			&sf->uc.uc_mcontext.fault_address);
-	err |= __put_user(set->sig[0], &sf->uc.uc_mcontext.oldmask);
-
-	err |= __copy_to_user(&sf->uc.uc_sigmask, set, sizeof(*set));
-
-	return err;
-}
-
-static inline void __user *get_sigframe(struct k_sigaction *ka,
-		struct pt_regs *regs, int framesize)
-{
-	unsigned long sp = regs->UCreg_sp;
-	void __user *frame;
-
-	/*
-	 * This is the X/Open sanctioned signal stack switching.
-	 */
-	if ((ka->sa.sa_flags & SA_ONSTACK) && !sas_ss_flags(sp))
-		sp = current->sas_ss_sp + current->sas_ss_size;
-
-	/*
-	 * ATPCS B01 mandates 8-byte alignment
-	 */
-	frame = (void __user *)((sp - framesize) & ~7);
-
-	/*
-	 * Check that we can actually write to the signal frame.
-	 */
-	if (!access_ok(frame, framesize))
-		frame = NULL;
-
-	return frame;
-}
-
-static int setup_return(struct pt_regs *regs, struct k_sigaction *ka,
-	     unsigned long __user *rc, void __user *frame, int usig)
-{
-	unsigned long handler = (unsigned long)ka->sa.sa_handler;
-	unsigned long retcode;
-	unsigned long asr = regs->UCreg_asr & ~PSR_f;
-
-	unsigned int idx = 0;
-
-	if (ka->sa.sa_flags & SA_SIGINFO)
-		idx += 1;
-
-	if (__put_user(sigreturn_codes[idx],   rc) ||
-	    __put_user(sigreturn_codes[idx+1], rc+1))
-		return 1;
-
-	retcode = KERN_SIGRETURN_CODE + (idx << 2);
-
-	regs->UCreg_00 = usig;
-	regs->UCreg_sp = (unsigned long)frame;
-	regs->UCreg_lr = retcode;
-	regs->UCreg_pc = handler;
-	regs->UCreg_asr = asr;
-
-	return 0;
-}
-
-static int setup_frame(struct ksignal *ksig, sigset_t *set,
-		       struct pt_regs *regs)
-{
-	struct sigframe __user *frame = get_sigframe(&ksig->ka, regs, sizeof(*frame));
-	int err = 0;
-
-	if (!frame)
-		return 1;
-
-	/*
-	 * Set uc.uc_flags to a value which sc.trap_no would never have.
-	 */
-	err |= __put_user(0x5ac3c35a, &frame->uc.uc_flags);
-
-	err |= setup_sigframe(frame, regs, set);
-	if (err == 0)
-		err |= setup_return(regs, &ksig->ka, frame->retcode, frame,
-				    ksig->sig);
-
-	return err;
-}
-
-static int setup_rt_frame(struct ksignal *ksig, sigset_t *set,
-			  struct pt_regs *regs)
-{
-	struct rt_sigframe __user *frame =
-			get_sigframe(&ksig->ka, regs, sizeof(*frame));
-	int err = 0;
-
-	if (!frame)
-		return 1;
-
-	err |= copy_siginfo_to_user(&frame->info, &ksig->info);
-
-	err |= __put_user(0, &frame->sig.uc.uc_flags);
-	err |= __put_user(NULL, &frame->sig.uc.uc_link);
-	err |= __save_altstack(&frame->sig.uc.uc_stack, regs->UCreg_sp);
-	err |= setup_sigframe(&frame->sig, regs, set);
-	if (err == 0)
-		err |= setup_return(regs, &ksig->ka, frame->sig.retcode, frame,
-				    ksig->sig);
-
-	if (err == 0) {
-		/*
-		 * For realtime signals we must also set the second and third
-		 * arguments for the signal handler.
-		 */
-		regs->UCreg_01 = (unsigned long)&frame->info;
-		regs->UCreg_02 = (unsigned long)&frame->sig.uc;
-	}
-
-	return err;
-}
-
-static inline void setup_syscall_restart(struct pt_regs *regs)
-{
-	regs->UCreg_00 = regs->UCreg_ORIG_00;
-	regs->UCreg_pc -= 4;
-}
-
-/*
- * OK, we're invoking a handler
- */
-static void handle_signal(struct ksignal *ksig, struct pt_regs *regs,
-			  int syscall)
-{
-	struct thread_info *thread = current_thread_info();
-	sigset_t *oldset = sigmask_to_save();
-	int usig = ksig->sig;
-	int ret;
-
-	/*
-	 * If we were from a system call, check for system call restarting...
-	 */
-	if (syscall) {
-		switch (regs->UCreg_00) {
-		case -ERESTART_RESTARTBLOCK:
-		case -ERESTARTNOHAND:
-			regs->UCreg_00 = -EINTR;
-			break;
-		case -ERESTARTSYS:
-			if (!(ksig->ka.sa.sa_flags & SA_RESTART)) {
-				regs->UCreg_00 = -EINTR;
-				break;
-			}
-			/* fallthrough */
-		case -ERESTARTNOINTR:
-			setup_syscall_restart(regs);
-		}
-	}
-
-	/*
-	 * Set up the stack frame
-	 */
-	if (ksig->ka.sa.sa_flags & SA_SIGINFO)
-		ret = setup_rt_frame(ksig, oldset, regs);
-	else
-		ret = setup_frame(ksig, oldset, regs);
-
-	/*
-	 * Check that the resulting registers are actually sane.
-	 */
-	ret |= !valid_user_regs(regs);
-
-	signal_setup_done(ret, ksig, 0);
-}
-
-/*
- * Note that 'init' is a special process: it doesn't get signals it doesn't
- * want to handle. Thus you cannot kill init even with a SIGKILL even by
- * mistake.
- *
- * Note that we go through the signals twice: once to check the signals that
- * the kernel can handle, and then we build all the user-level signal handling
- * stack-frames in one go after that.
- */
-static void do_signal(struct pt_regs *regs, int syscall)
-{
-	struct ksignal ksig;
-
-	/*
-	 * We want the common case to go fast, which
-	 * is why we may in certain cases get here from
-	 * kernel mode. Just return without doing anything
-	 * if so.
-	 */
-	if (!user_mode(regs))
-		return;
-
-	if (get_signal(&ksig)) {
-		handle_signal(&ksig, regs, syscall);
-		return;
-	}
-
-	/*
-	 * No signal to deliver to the process - restart the syscall.
-	 */
-	if (syscall) {
-		if (regs->UCreg_00 == -ERESTART_RESTARTBLOCK) {
-				u32 __user *usp;
-
-				regs->UCreg_sp -= 4;
-				usp = (u32 __user *)regs->UCreg_sp;
-
-				if (put_user(regs->UCreg_pc, usp) == 0) {
-					regs->UCreg_pc = KERN_RESTART_CODE;
-				} else {
-					regs->UCreg_sp += 4;
-					force_sigsegv(0);
-				}
-		}
-		if (regs->UCreg_00 == -ERESTARTNOHAND ||
-		    regs->UCreg_00 == -ERESTARTSYS ||
-		    regs->UCreg_00 == -ERESTARTNOINTR) {
-			setup_syscall_restart(regs);
-		}
-	}
-	/* If there's no signal to deliver, we just put the saved
-	 * sigmask back.
-	 */
-	restore_saved_sigmask();
-}
-
-asmlinkage void do_notify_resume(struct pt_regs *regs,
-		unsigned int thread_flags, int syscall)
-{
-	if (thread_flags & _TIF_SIGPENDING)
-		do_signal(regs, syscall);
-
-	if (thread_flags & _TIF_NOTIFY_RESUME) {
-		clear_thread_flag(TIF_NOTIFY_RESUME);
-		tracehook_notify_resume(regs);
-	}
-}
-
-/*
- * Copy signal return handlers into the vector page, and
- * set sigreturn to be a pointer to these.
- */
-void __init early_signal_init(void)
-{
-	memcpy((void *)kuser_vecpage_to_vectors(KERN_SIGRETURN_CODE),
-			sigreturn_codes, sizeof(sigreturn_codes));
-	memcpy((void *)kuser_vecpage_to_vectors(KERN_RESTART_CODE),
-			syscall_restart_code, sizeof(syscall_restart_code));
-	/* Need not to flush icache, since early_trap_init will do it last. */
-}
diff --git a/arch/unicore32/kernel/sleep.S b/arch/unicore32/kernel/sleep.S
deleted file mode 100644
index 23151abe53c6..000000000000
--- a/arch/unicore32/kernel/sleep.S
+++ /dev/null
@@ -1,199 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/kernel/sleep.S
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- *	Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
- *	Copyright (C) 2001-2010 Guan Xuetao
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <mach/hardware.h>
-
-		.text
-
-pkunity_cpu_save_cp:
-
-	@ get coprocessor registers
-
-	movc	r3, p0.c7, #0			@ PID
-	movc	r4, p0.c2, #0			@ translation table base addr
-	movc	r5, p0.c1, #0			@ control reg
-
-
-	@ store them plus current virtual stack ptr on stack
-	mov	r6, sp
-	stm.w	(r3 - r6), [sp-]
-
-	mov	pc, lr
-
-pkunity_cpu_save_sp:
-	@ preserve phys address of stack
-	mov	r0, sp
-	stw.w	lr, [sp+], #-4
-	b.l	sleep_phys_sp
-	ldw	r1, =sleep_save_sp
-	stw	r0, [r1]
-	ldw.w	pc, [sp]+, #4
-
-/*
- * puv3_cpu_suspend()
- *
- * Forces CPU into sleep state.
- *
- * r0 = value for PWRMODE M field for desired sleep state
- */
-
-ENTRY(puv3_cpu_suspend)
-	stm.w	(r16 - r27, lr), [sp-]		@ save registers on stack
-	stm.w	(r4 - r15), [sp-]		@ save registers on stack
-
-#ifdef	CONFIG_UNICORE_FPU_F64
-	sfm.w	(f0  - f7 ), [sp-]
-	sfm.w	(f8  - f15), [sp-]
-	sfm.w	(f16 - f23), [sp-]
-	sfm.w	(f24 - f31), [sp-]
-	cff	r4, s31
-	stm.w	(r4), [sp-]
-#endif
-	b.l	pkunity_cpu_save_cp
-
-	b.l	pkunity_cpu_save_sp
-
-	@ clean data cache
-	mov	r1, #0
-	movc	p0.c5, r1, #14
-	nop
-	nop
-	nop
-	nop
-
-
-
-	@ DDR2 BaseAddr
-	ldw	r0, =(PKUNITY_DDR2CTRL_BASE)
-
-	@ PM BaseAddr
-	ldw	r1, =(PKUNITY_PM_BASE)
-
-	@ set PLL_SYS_CFG reg, 275
-	movl	r6, #0x00002401
-	stw	r6, [r1+], #0x18
-	@ set PLL_DDR_CFG reg, 66MHz
-	movl	r6, #0x00100c00
-	stw	r6, [r1+], #0x1c
-
-	@ set wake up source
-	movl	r8, #0x800001ff		@ epip4d
-	stw	r8, [r1+], #0xc
-
-	@ set PGSR
-	movl	r5, #0x40000
-	stw	r5, [r1+], #0x10
-
-	@ prepare DDR2 refresh settings
-	ldw	r5, [r0+], #0x24
-	or	r5, r5, #0x00000001
-
-	@ prepare PMCR for PLL changing
-	movl	r6, #0xc
-
-	@ prepare for closing PLL
-	movl	r7, #0x1
-
-	@ prepare sleep mode
-	mov	r8, #0x1
-
-@	movl	r0, 0x11111111
-@	put_word_ocd r0
-	b	pkunity_cpu_do_suspend
-
-	.ltorg
-	.align	5
-pkunity_cpu_do_suspend:
-	b	101f
-	@ put DDR2 into self-refresh
-100:	stw	r5, [r0+], #0x24
-	@ change PLL
-	stw	r6, [r1]
-	b	1f
-
-	.ltorg
-	.align	5
-101:	b	102f
-	@ wait for PLL changing complete
-1:	ldw	r6, [r1+], #0x44
-	csub.a	r6, #0x1
-	bne	1b
-	b	2f
-
-	.ltorg
-	.align	5
-102:	b	100b
-	@ close PLL
-2:	stw	r7, [r1+], #0x4
-	@ enter sleep mode
-	stw	r8, [r1]
-3:	b	3b
-
-
-
-
-/*
- * puv3_cpu_resume()
- *
- * entry point from bootloader into kernel during resume
- *
- * Note: Yes, part of the following code is located into the .data section.
- *       This is to allow sleep_save_sp to be accessed with a relative load
- *       while we can't rely on any MMU translation.  We could have put
- *       sleep_save_sp in the .text section as well, but some setups might
- *       insist on it to be truly read-only.
- */
-
-	.data
-	.align 5
-ENTRY(puv3_cpu_resume)
-@	movl	r0, 0x20202020
-@	put_word_ocd r0
-
-	ldw	r0, sleep_save_sp		@ stack phys addr
-	ldw	r2, =resume_after_mmu		@ its absolute virtual address
-	ldm	(r3 - r6), [r0]+		@ CP regs + virt stack ptr
-	mov	sp, r6				@ CP regs + virt stack ptr
-
-	mov	r1, #0
-	movc	p0.c6, r1, #6			@ invalidate I & D TLBs
-	movc	p0.c5, r1, #28			@ invalidate I & D caches, BTB
-
-	movc	p0.c7, r3, #0			@ PID
-	movc	p0.c2, r4, #0			@ translation table base addr
-	movc	p0.c1, r5, #0			@ control reg, turn on mmu
-	nop
-	jump	r2
-	nop
-	nop
-	nop
-	nop
-	nop
-
-sleep_save_sp:
-	.word	0				@ preserve stack phys ptr here
-
-	.text
-resume_after_mmu:
-@	movl	r0, 0x30303030
-@	put_word_ocd r0
-
-#ifdef	CONFIG_UNICORE_FPU_F64
-	lfm.w	(f0  - f7 ), [sp]+
-	lfm.w	(f8  - f15), [sp]+
-	lfm.w	(f16 - f23), [sp]+
-	lfm.w	(f24 - f31), [sp]+
-	ldm.w	(r4), [sp]+
-	ctf	r4, s31
-#endif
-	ldm.w	(r4 - r15), [sp]+		@ restore registers from stack
-	ldm.w	(r16 - r27, pc), [sp]+		@ return to caller
diff --git a/arch/unicore32/kernel/stacktrace.c b/arch/unicore32/kernel/stacktrace.c
deleted file mode 100644
index c9d8650e9d78..000000000000
--- a/arch/unicore32/kernel/stacktrace.c
+++ /dev/null
@@ -1,127 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/stacktrace.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/sched/debug.h>
-#include <linux/stacktrace.h>
-
-#include <asm/stacktrace.h>
-
-#if defined(CONFIG_FRAME_POINTER)
-/*
- * Unwind the current stack frame and store the new register values in the
- * structure passed as argument. Unwinding is equivalent to a function return,
- * hence the new PC value rather than LR should be used for backtrace.
- *
- * With framepointer enabled, a simple function prologue looks like this:
- *	mov	ip, sp
- *	stmdb	sp!, {fp, ip, lr, pc}
- *	sub	fp, ip, #4
- *
- * A simple function epilogue looks like this:
- *	ldm	sp, {fp, sp, pc}
- *
- * Note that with framepointer enabled, even the leaf functions have the same
- * prologue and epilogue, therefore we can ignore the LR value in this case.
- */
-int notrace unwind_frame(struct stackframe *frame)
-{
-	unsigned long high, low;
-	unsigned long fp = frame->fp;
-
-	/* only go to a higher address on the stack */
-	low = frame->sp;
-	high = ALIGN(low, THREAD_SIZE);
-
-	/* check current frame pointer is within bounds */
-	if (fp < (low + 12) || fp + 4 >= high)
-		return -EINVAL;
-
-	/* restore the registers from the stack frame */
-	frame->fp = *(unsigned long *)(fp - 12);
-	frame->sp = *(unsigned long *)(fp - 8);
-	frame->pc = *(unsigned long *)(fp - 4);
-
-	return 0;
-}
-#endif
-
-void notrace walk_stackframe(struct stackframe *frame,
-		     int (*fn)(struct stackframe *, void *), void *data)
-{
-	while (1) {
-		int ret;
-
-		if (fn(frame, data))
-			break;
-		ret = unwind_frame(frame);
-		if (ret < 0)
-			break;
-	}
-}
-EXPORT_SYMBOL(walk_stackframe);
-
-#ifdef CONFIG_STACKTRACE
-struct stack_trace_data {
-	struct stack_trace *trace;
-	unsigned int no_sched_functions;
-	unsigned int skip;
-};
-
-static int save_trace(struct stackframe *frame, void *d)
-{
-	struct stack_trace_data *data = d;
-	struct stack_trace *trace = data->trace;
-	unsigned long addr = frame->pc;
-
-	if (data->no_sched_functions && in_sched_functions(addr))
-		return 0;
-	if (data->skip) {
-		data->skip--;
-		return 0;
-	}
-
-	trace->entries[trace->nr_entries++] = addr;
-
-	return trace->nr_entries >= trace->max_entries;
-}
-
-void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
-{
-	struct stack_trace_data data;
-	struct stackframe frame;
-
-	data.trace = trace;
-	data.skip = trace->skip;
-
-	if (tsk != current) {
-		data.no_sched_functions = 1;
-		frame.fp = thread_saved_fp(tsk);
-		frame.sp = thread_saved_sp(tsk);
-		frame.lr = 0;		/* recovered from the stack */
-		frame.pc = thread_saved_pc(tsk);
-	} else {
-		register unsigned long current_sp asm("sp");
-
-		data.no_sched_functions = 0;
-		frame.fp = (unsigned long)__builtin_frame_address(0);
-		frame.sp = current_sp;
-		frame.lr = (unsigned long)__builtin_return_address(0);
-		frame.pc = (unsigned long)save_stack_trace_tsk;
-	}
-
-	walk_stackframe(&frame, save_trace, &data);
-}
-
-void save_stack_trace(struct stack_trace *trace)
-{
-	save_stack_trace_tsk(current, trace);
-}
-EXPORT_SYMBOL_GPL(save_stack_trace);
-#endif
diff --git a/arch/unicore32/kernel/sys.c b/arch/unicore32/kernel/sys.c
deleted file mode 100644
index 256fb4082296..000000000000
--- a/arch/unicore32/kernel/sys.c
+++ /dev/null
@@ -1,37 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/sys.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/mm.h>
-#include <linux/sem.h>
-#include <linux/msg.h>
-#include <linux/shm.h>
-#include <linux/stat.h>
-#include <linux/syscalls.h>
-#include <linux/mman.h>
-#include <linux/fs.h>
-#include <linux/file.h>
-#include <linux/ipc.h>
-#include <linux/uaccess.h>
-
-#include <asm/syscalls.h>
-#include <asm/cacheflush.h>
-
-/* Provide the actual syscall number to call mapping. */
-#undef __SYSCALL
-#define __SYSCALL(nr, call)	[nr] = (call),
-
-#define sys_mmap2 sys_mmap_pgoff
-/* Note that we don't include <linux/unistd.h> but <asm/unistd.h> */
-void *sys_call_table[__NR_syscalls] = {
-	[0 ... __NR_syscalls-1] = sys_ni_syscall,
-#include <asm/unistd.h>
-};
diff --git a/arch/unicore32/kernel/time.c b/arch/unicore32/kernel/time.c
deleted file mode 100644
index c3a37edf4d40..000000000000
--- a/arch/unicore32/kernel/time.c
+++ /dev/null
@@ -1,128 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/time.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- *	Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
- *	Copyright (C) 2001-2010 Guan Xuetao
- */
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/timex.h>
-#include <linux/clockchips.h>
-
-#include <mach/hardware.h>
-
-#define MIN_OSCR_DELTA 2
-
-static irqreturn_t puv3_ost0_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *c = dev_id;
-
-	/* Disarm the compare/match, signal the event. */
-	writel(readl(OST_OIER) & ~OST_OIER_E0, OST_OIER);
-	writel(readl(OST_OSSR) & ~OST_OSSR_M0, OST_OSSR);
-	c->event_handler(c);
-
-	return IRQ_HANDLED;
-}
-
-static int
-puv3_osmr0_set_next_event(unsigned long delta, struct clock_event_device *c)
-{
-	unsigned long next, oscr;
-
-	writel(readl(OST_OIER) | OST_OIER_E0, OST_OIER);
-	next = readl(OST_OSCR) + delta;
-	writel(next, OST_OSMR0);
-	oscr = readl(OST_OSCR);
-
-	return (signed)(next - oscr) <= MIN_OSCR_DELTA ? -ETIME : 0;
-}
-
-static int puv3_osmr0_shutdown(struct clock_event_device *evt)
-{
-	writel(readl(OST_OIER) & ~OST_OIER_E0, OST_OIER);
-	writel(readl(OST_OSSR) & ~OST_OSSR_M0, OST_OSSR);
-	return 0;
-}
-
-static struct clock_event_device ckevt_puv3_osmr0 = {
-	.name			= "osmr0",
-	.features		= CLOCK_EVT_FEAT_ONESHOT,
-	.rating			= 200,
-	.set_next_event		= puv3_osmr0_set_next_event,
-	.set_state_shutdown	= puv3_osmr0_shutdown,
-	.set_state_oneshot	= puv3_osmr0_shutdown,
-};
-
-static u64 puv3_read_oscr(struct clocksource *cs)
-{
-	return readl(OST_OSCR);
-}
-
-static struct clocksource cksrc_puv3_oscr = {
-	.name		= "oscr",
-	.rating		= 200,
-	.read		= puv3_read_oscr,
-	.mask		= CLOCKSOURCE_MASK(32),
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-void __init time_init(void)
-{
-	writel(0, OST_OIER);		/* disable any timer interrupts */
-	writel(0, OST_OSSR);		/* clear status on all timers */
-
-	clockevents_calc_mult_shift(&ckevt_puv3_osmr0, CLOCK_TICK_RATE, 5);
-
-	ckevt_puv3_osmr0.max_delta_ns =
-		clockevent_delta2ns(0x7fffffff, &ckevt_puv3_osmr0);
-	ckevt_puv3_osmr0.max_delta_ticks = 0x7fffffff;
-	ckevt_puv3_osmr0.min_delta_ns =
-		clockevent_delta2ns(MIN_OSCR_DELTA * 2, &ckevt_puv3_osmr0) + 1;
-	ckevt_puv3_osmr0.min_delta_ticks = MIN_OSCR_DELTA * 2;
-	ckevt_puv3_osmr0.cpumask = cpumask_of(0);
-
-	if (request_irq(IRQ_TIMER0, puv3_ost0_interrupt,
-			IRQF_TIMER | IRQF_IRQPOLL, "ost0", &ckevt_puv3_osmr0))
-		pr_err("Failed to register ost0 interrupt\n");
-
-	clocksource_register_hz(&cksrc_puv3_oscr, CLOCK_TICK_RATE);
-	clockevents_register_device(&ckevt_puv3_osmr0);
-}
-
-#ifdef CONFIG_PM
-unsigned long osmr[4], oier;
-
-void puv3_timer_suspend(void)
-{
-	osmr[0] = readl(OST_OSMR0);
-	osmr[1] = readl(OST_OSMR1);
-	osmr[2] = readl(OST_OSMR2);
-	osmr[3] = readl(OST_OSMR3);
-	oier = readl(OST_OIER);
-}
-
-void puv3_timer_resume(void)
-{
-	writel(0, OST_OSSR);
-	writel(osmr[0], OST_OSMR0);
-	writel(osmr[1], OST_OSMR1);
-	writel(osmr[2], OST_OSMR2);
-	writel(osmr[3], OST_OSMR3);
-	writel(oier, OST_OIER);
-
-	/*
-	 * OSMR0 is the system timer: make sure OSCR is sufficiently behind
-	 */
-	writel(readl(OST_OSMR0) - LATCH, OST_OSCR);
-}
-#else
-void puv3_timer_suspend(void) { };
-void puv3_timer_resume(void) { };
-#endif
-
diff --git a/arch/unicore32/kernel/traps.c b/arch/unicore32/kernel/traps.c
deleted file mode 100644
index a3ac01df1a2e..000000000000
--- a/arch/unicore32/kernel/traps.c
+++ /dev/null
@@ -1,322 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/kernel/traps.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- *
- *  'traps.c' handles hardware exceptions after we have saved some state.
- *  Mostly a debugging aid, but will probably kill the offending process.
- */
-#include <linux/module.h>
-#include <linux/signal.h>
-#include <linux/sched/signal.h>
-#include <linux/sched/debug.h>
-#include <linux/sched/task_stack.h>
-#include <linux/spinlock.h>
-#include <linux/personality.h>
-#include <linux/kallsyms.h>
-#include <linux/kdebug.h>
-#include <linux/uaccess.h>
-#include <linux/delay.h>
-#include <linux/hardirq.h>
-#include <linux/init.h>
-#include <linux/atomic.h>
-#include <linux/unistd.h>
-
-#include <asm/cacheflush.h>
-#include <asm/traps.h>
-
-#include "setup.h"
-
-static void dump_mem(const char *, const char *, unsigned long, unsigned long);
-
-void dump_backtrace_entry(unsigned long where,
-		unsigned long from, unsigned long frame)
-{
-#ifdef CONFIG_KALLSYMS
-	printk(KERN_DEFAULT "[<%08lx>] (%pS) from [<%08lx>] (%pS)\n",
-			where, (void *)where, from, (void *)from);
-#else
-	printk(KERN_DEFAULT "Function entered at [<%08lx>] from [<%08lx>]\n",
-			where, from);
-#endif
-}
-
-/*
- * Stack pointers should always be within the kernels view of
- * physical memory.  If it is not there, then we can't dump
- * out any information relating to the stack.
- */
-static int verify_stack(unsigned long sp)
-{
-	if (sp < PAGE_OFFSET ||
-	    (sp > (unsigned long)high_memory && high_memory != NULL))
-		return -EFAULT;
-
-	return 0;
-}
-
-/*
- * Dump out the contents of some memory nicely...
- */
-static void dump_mem(const char *lvl, const char *str, unsigned long bottom,
-		     unsigned long top)
-{
-	unsigned long first;
-	mm_segment_t fs;
-	int i;
-
-	/*
-	 * We need to switch to kernel mode so that we can use __get_user
-	 * to safely read from kernel space.  Note that we now dump the
-	 * code first, just in case the backtrace kills us.
-	 */
-	fs = get_fs();
-	set_fs(KERNEL_DS);
-
-	printk(KERN_DEFAULT "%s%s(0x%08lx to 0x%08lx)\n",
-			lvl, str, bottom, top);
-
-	for (first = bottom & ~31; first < top; first += 32) {
-		unsigned long p;
-		char str[sizeof(" 12345678") * 8 + 1];
-
-		memset(str, ' ', sizeof(str));
-		str[sizeof(str) - 1] = '\0';
-
-		for (p = first, i = 0; i < 8 && p < top; i++, p += 4) {
-			if (p >= bottom && p < top) {
-				unsigned long val;
-				if (__get_user(val, (unsigned long *)p) == 0)
-					sprintf(str + i * 9, " %08lx", val);
-				else
-					sprintf(str + i * 9, " ????????");
-			}
-		}
-		printk(KERN_DEFAULT "%s%04lx:%s\n", lvl, first & 0xffff, str);
-	}
-
-	set_fs(fs);
-}
-
-static void dump_instr(const char *lvl, struct pt_regs *regs)
-{
-	unsigned long addr = instruction_pointer(regs);
-	const int width = 8;
-	mm_segment_t fs;
-	char str[sizeof("00000000 ") * 5 + 2 + 1], *p = str;
-	int i;
-
-	/*
-	 * We need to switch to kernel mode so that we can use __get_user
-	 * to safely read from kernel space.  Note that we now dump the
-	 * code first, just in case the backtrace kills us.
-	 */
-	fs = get_fs();
-	set_fs(KERNEL_DS);
-
-	for (i = -4; i < 1; i++) {
-		unsigned int val, bad;
-
-		bad = __get_user(val, &((u32 *)addr)[i]);
-
-		if (!bad)
-			p += sprintf(p, i == 0 ? "(%0*x) " : "%0*x ",
-					width, val);
-		else {
-			p += sprintf(p, "bad PC value");
-			break;
-		}
-	}
-	printk(KERN_DEFAULT "%sCode: %s\n", lvl, str);
-
-	set_fs(fs);
-}
-
-static void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk,
-			   const char *loglvl)
-{
-	unsigned int fp;
-	int ok = 1;
-
-	printk("%sBacktrace: ", loglvl);
-
-	if (!tsk)
-		tsk = current;
-
-	if (regs)
-		fp = regs->UCreg_fp;
-	else if (tsk != current)
-		fp = thread_saved_fp(tsk);
-	else
-		asm("mov %0, fp" : "=r" (fp) : : "cc");
-
-	if (!fp) {
-		printk("%sno frame pointer", loglvl);
-		ok = 0;
-	} else if (verify_stack(fp)) {
-		printk("%sinvalid frame pointer 0x%08x", loglvl, fp);
-		ok = 0;
-	} else if (fp < (unsigned long)end_of_stack(tsk))
-		printk("%sframe pointer underflow", loglvl);
-	printk("%s\n", loglvl);
-
-	if (ok)
-		c_backtrace(fp, loglvl);
-}
-
-void show_stack(struct task_struct *tsk, unsigned long *sp,
-		       const char *loglvl)
-{
-	dump_backtrace(NULL, tsk, loglvl);
-	barrier();
-}
-
-static int __die(const char *str, int err, struct thread_info *thread,
-		struct pt_regs *regs)
-{
-	struct task_struct *tsk = thread->task;
-	static int die_counter;
-	int ret;
-
-	printk(KERN_EMERG "Internal error: %s: %x [#%d]\n",
-	       str, err, ++die_counter);
-
-	/* trap and error numbers are mostly meaningless on UniCore */
-	ret = notify_die(DIE_OOPS, str, regs, err, tsk->thread.trap_no, \
-			SIGSEGV);
-	if (ret == NOTIFY_STOP)
-		return ret;
-
-	print_modules();
-	__show_regs(regs);
-	printk(KERN_EMERG "Process %.*s (pid: %d, stack limit = 0x%p)\n",
-		TASK_COMM_LEN, tsk->comm, task_pid_nr(tsk), thread + 1);
-
-	if (!user_mode(regs) || in_interrupt()) {
-		dump_mem(KERN_EMERG, "Stack: ", regs->UCreg_sp,
-			 THREAD_SIZE + (unsigned long)task_stack_page(tsk));
-		dump_backtrace(regs, tsk, KERN_EMERG);
-		dump_instr(KERN_EMERG, regs);
-	}
-
-	return ret;
-}
-
-DEFINE_SPINLOCK(die_lock);
-
-/*
- * This function is protected against re-entrancy.
- */
-void die(const char *str, struct pt_regs *regs, int err)
-{
-	struct thread_info *thread = current_thread_info();
-	int ret;
-
-	oops_enter();
-
-	spin_lock_irq(&die_lock);
-	console_verbose();
-	bust_spinlocks(1);
-	ret = __die(str, err, thread, regs);
-
-	bust_spinlocks(0);
-	add_taint(TAINT_DIE, LOCKDEP_NOW_UNRELIABLE);
-	spin_unlock_irq(&die_lock);
-	oops_exit();
-
-	if (in_interrupt())
-		panic("Fatal exception in interrupt");
-	if (panic_on_oops)
-		panic("Fatal exception");
-	if (ret != NOTIFY_STOP)
-		do_exit(SIGSEGV);
-}
-
-void uc32_notify_die(const char *str, struct pt_regs *regs,
-		int sig, int code, void __user *addr,
-		unsigned long err, unsigned long trap)
-{
-	if (user_mode(regs)) {
-		current->thread.error_code = err;
-		current->thread.trap_no = trap;
-
-		force_sig_fault(sig, code, addr);
-	} else
-		die(str, regs, err);
-}
-
-/*
- * bad_mode handles the impossible case in the vectors.  If you see one of
- * these, then it's extremely serious, and could mean you have buggy hardware.
- * It never returns, and never tries to sync.  We hope that we can at least
- * dump out some state information...
- */
-asmlinkage void bad_mode(struct pt_regs *regs, unsigned int reason)
-{
-	console_verbose();
-
-	printk(KERN_CRIT "Bad mode detected with reason 0x%x\n", reason);
-
-	die("Oops - bad mode", regs, 0);
-	local_irq_disable();
-	panic("bad mode");
-}
-
-void __pte_error(const char *file, int line, unsigned long val)
-{
-	printk(KERN_DEFAULT "%s:%d: bad pte %08lx.\n", file, line, val);
-}
-
-void __pmd_error(const char *file, int line, unsigned long val)
-{
-	printk(KERN_DEFAULT "%s:%d: bad pmd %08lx.\n", file, line, val);
-}
-
-void __pgd_error(const char *file, int line, unsigned long val)
-{
-	printk(KERN_DEFAULT "%s:%d: bad pgd %08lx.\n", file, line, val);
-}
-
-asmlinkage void __div0(void)
-{
-	printk(KERN_DEFAULT "Division by zero in kernel.\n");
-	dump_stack();
-}
-EXPORT_SYMBOL(__div0);
-
-void abort(void)
-{
-	BUG();
-
-	/* if that doesn't kill us, halt */
-	panic("Oops failed to kill thread");
-}
-
-void __init trap_init(void)
-{
-	return;
-}
-
-void __init early_trap_init(void)
-{
-	unsigned long vectors = VECTORS_BASE;
-
-	/*
-	 * Copy the vectors, stubs (in entry-unicore.S)
-	 * into the vector page, mapped at 0xffff0000, and ensure these
-	 * are visible to the instruction stream.
-	 */
-	memcpy((void *)vectors,
-			__vectors_start,
-			__vectors_end - __vectors_start);
-	memcpy((void *)vectors + 0x200,
-			__stubs_start,
-			__stubs_end - __stubs_start);
-
-	early_signal_init();
-
-	flush_icache_range(vectors, vectors + PAGE_SIZE);
-}
diff --git a/arch/unicore32/kernel/vmlinux.lds.S b/arch/unicore32/kernel/vmlinux.lds.S
deleted file mode 100644
index 6fb320b337ef..000000000000
--- a/arch/unicore32/kernel/vmlinux.lds.S
+++ /dev/null
@@ -1,59 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/kernel/vmlinux.lds.S
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-
-#include <asm-generic/vmlinux.lds.h>
-#include <asm/thread_info.h>
-#include <asm/memory.h>
-#include <asm/page.h>
-#include <asm/cache.h>
-
-OUTPUT_ARCH(unicore32)
-ENTRY(stext)
-
-jiffies = jiffies_64;
-
-SECTIONS
-{
-	. = PAGE_OFFSET + KERNEL_IMAGE_START;
-
-	_text = .;
-	__init_begin = .;
-	HEAD_TEXT_SECTION
-	INIT_TEXT_SECTION(PAGE_SIZE)
-	INIT_DATA_SECTION(16)
-	PERCPU_SECTION(L1_CACHE_BYTES)
-	__init_end = .;
-
-	_stext = .;
-	.text : {		/* Real text segment */
-		TEXT_TEXT
-		SCHED_TEXT
-		CPUIDLE_TEXT
-		LOCK_TEXT
-
-		*(.fixup)
-		*(.gnu.warning)
-	}
-	_etext = .;
-
-	_sdata = .;
-	RO_DATA(PAGE_SIZE)
-	RW_DATA(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
-	_edata = .;
-
-	EXCEPTION_TABLE(L1_CACHE_BYTES)
-
-	BSS_SECTION(0, 0, 0)
-	_end = .;
-
-	STABS_DEBUG
-	DWARF_DEBUG
-
-	DISCARDS		/* Exit code and data */
-}
diff --git a/arch/unicore32/lib/Makefile b/arch/unicore32/lib/Makefile
deleted file mode 100644
index 5af06645b8f0..000000000000
--- a/arch/unicore32/lib/Makefile
+++ /dev/null
@@ -1,28 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# linux/arch/unicore32/lib/Makefile
-#
-# Copyright (C) 2001-2010 GUAN Xue-tao
-#
-
-lib-y	:= backtrace.o delay.o findbit.o
-lib-y	+= strncpy_from_user.o strnlen_user.o
-lib-y	+= clear_user.o copy_page.o
-lib-y	+= copy_from_user.o copy_to_user.o
-
-GNU_LIBC_A		= $(shell $(CC) $(KBUILD_CFLAGS) -print-file-name=libc.a)
-GNU_LIBC_A_OBJS		:= memchr.o memcpy.o memmove.o memset.o
-GNU_LIBC_A_OBJS		+= strchr.o strrchr.o
-GNU_LIBC_A_OBJS		+= rawmemchr.o			# needed by strrchr.o
-
-GNU_LIBGCC_A		= $(shell $(CC) $(KBUILD_CFLAGS) -print-file-name=libgcc.a)
-GNU_LIBGCC_A_OBJS	:= _ashldi3.o _ashrdi3.o _lshrdi3.o
-GNU_LIBGCC_A_OBJS	+= _divsi3.o _modsi3.o _ucmpdi2.o _umodsi3.o _udivsi3.o
-
-lib-y	+= $(GNU_LIBC_A_OBJS) $(GNU_LIBGCC_A_OBJS)
-
-$(addprefix $(obj)/, $(GNU_LIBC_A_OBJS)):
-	$(Q)$(AR) p $(GNU_LIBC_A) $(notdir $@) > $@
-
-$(addprefix $(obj)/, $(GNU_LIBGCC_A_OBJS)):
-	$(Q)$(AR) p $(GNU_LIBGCC_A) $(notdir $@) > $@
diff --git a/arch/unicore32/lib/backtrace.S b/arch/unicore32/lib/backtrace.S
deleted file mode 100644
index 6221944b81f3..000000000000
--- a/arch/unicore32/lib/backtrace.S
+++ /dev/null
@@ -1,168 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/lib/backtrace.S
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-		.text
-
-@ fp is 0 or stack frame
-
-#define frame	v4
-#define sv_fp	v5
-#define sv_pc	v6
-#define offset	v8
-#define loglvl	v9
-
-ENTRY(__backtrace)
-		mov	r0, fp
-
-ENTRY(c_backtrace)
-
-#if !defined(CONFIG_FRAME_POINTER) || !defined(CONFIG_PRINTK)
-		mov	pc, lr
-ENDPROC(__backtrace)
-ENDPROC(c_backtrace)
-#else
-		stm.w	(v4 - v10, lr), [sp-]	@ Save an extra register
-						@ so we have a location...
-		mov.a	frame, r0		@ if frame pointer is zero
-		beq	no_frame		@ we have no stack frames
-		mov	loglvl, r1
-
-1:		stm.w	(pc), [sp-]		@ calculate offset of PC stored
-		ldw.w	r0, [sp]+, #4		@ by stmfd for this CPU
-		adr	r1, 1b
-		sub	offset, r0, r1
-
-/*
- * Stack frame layout:
- *             optionally saved caller registers (r4 - r10)
- *             saved fp
- *             saved sp
- *             saved lr
- *    frame => saved pc
- *             optionally saved arguments (r0 - r3)
- * saved sp => <next word>
- *
- * Functions start with the following code sequence:
- *                  mov   ip, sp
- *                  stm.w (r0 - r3), [sp-] (optional)
- * corrected pc =>  stm.w sp, (..., fp, ip, lr, pc)
- */
-for_each_frame:
-
-1001:		ldw	sv_pc, [frame+], #0	@ get saved pc
-1002:		ldw	sv_fp, [frame+], #-12	@ get saved fp
-
-		sub	sv_pc, sv_pc, offset	@ Correct PC for prefetching
-
-1003:		ldw	r2, [sv_pc+], #-4	@ if stmfd sp, {args} exists,
-		ldw	r3, .Ldsi+4		@ adjust saved 'pc' back one
-		cxor.a	r3, r2 >> #14		@ instruction
-		beq	201f
-		sub	r0, sv_pc, #4		@ allow for mov
-		b	202f
-201:
-		sub	r0, sv_pc, #8		@ allow for mov + stmia
-202:
-		ldw	r1, [frame+], #-4	@ get saved lr
-		mov	r2, frame
-		b.l	dump_backtrace_entry
-
-		ldw	r1, [sv_pc+], #-4	@ if stmfd sp, {args} exists,
-		ldw	r3, .Ldsi+4
-		cxor.a	r3, r1 >> #14
-		bne	1004f
-		ldw	r0, [frame+], #-8	@ get sp
-		sub	r0, r0, #4		@ point at the last arg
-		b.l	.Ldumpstm		@ dump saved registers
-
-1004:		ldw	r1, [sv_pc+], #0	@ if stmfd {, fp, ip, lr, pc}
-		ldw	r3, .Ldsi		@ instruction exists,
-		cxor.a	r3, r1 >> #14
-		bne	201f
-		sub	r0, frame, #16
-		b.l	.Ldumpstm		@ dump saved registers
-201:
-		cxor.a	sv_fp, #0		@ zero saved fp means
-		beq	no_frame		@ no further frames
-
-		csub.a	sv_fp, frame		@ next frame must be
-		mov	frame, sv_fp		@ above the current frame
-		bua	for_each_frame
-
-1006:		adr	r0, .Lbad
-		mov	r1, loglvl
-		mov	r2, frame
-		b.l	printk
-no_frame:	ldm.w	(v4 - v10, pc), [sp]+
-ENDPROC(__backtrace)
-ENDPROC(c_backtrace)
-
-		.pushsection __ex_table,"a"
-		.align	3
-		.long	1001b, 1006b
-		.long	1002b, 1006b
-		.long	1003b, 1006b
-		.long	1004b, 1006b
-		.popsection
-
-#define instr v4
-#define reg   v5
-#define stack v6
-
-.Ldumpstm:	stm.w	(instr, reg, stack, v7, lr), [sp-]
-		mov	stack, r0
-		mov	instr, r1
-		mov	reg, #14
-		mov	v7, #0
-1:		mov	r3, #1
-		csub.a	reg, #8
-		bne	201f
-		sub	reg, reg, #3
-201:
-		cand.a	instr, r3 << reg
-		beq	2f
-		add	v7, v7, #1
-		cxor.a	v7, #6
-		cmoveq	v7, #1
-		bne	201f
-		adr	r0, .Lcr
-		mov	r1, loglvl
-		b.l	printk
-201:
-		ldw.w	r3, [stack]+, #-4
-		mov	r2, reg
-		csub.a	r2, #8
-		bsl	201f
-		sub	r2, r2, #3
-201:
-		cand.a	instr, #0x40		@ if H is 1, high 16 regs
-		beq	201f
-		add	r2, r2, #0x10		@ so r2 need add 16
-201:
-		adr	r0, .Lfp
-		mov	r1, loglvl
-		b.l	printk
-2:		sub.a	reg, reg, #1
-		bns	1b
-		cxor.a	v7, #0
-		beq	201f
-		adr	r0, .Lcr
-		mov	r1, loglvl
-		b.l	printk
-201:		ldm.w	(instr, reg, stack, v7, pc), [sp]+
-
-.Lfp:		.asciz	"%sr%d:%08x "
-.Lcr:		.asciz	"%s\n"
-.Lbad:		.asciz	"%sBacktrace aborted due to bad frame pointer <%p>\n"
-		.align
-.Ldsi:		.word	0x92eec000 >> 14	@ stm.w sp, (... fp, ip, lr, pc)
-		.word	0x92e10000 >> 14	@ stm.w sp, ()
-
-#endif
diff --git a/arch/unicore32/lib/clear_user.S b/arch/unicore32/lib/clear_user.S
deleted file mode 100644
index c6ca431b1090..000000000000
--- a/arch/unicore32/lib/clear_user.S
+++ /dev/null
@@ -1,54 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/lib/clear_user.S
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-		.text
-
-/* Prototype: int __clear_user(void *addr, size_t sz)
- * Purpose  : clear some user memory
- * Params   : addr - user memory address to clear
- *          : sz   - number of bytes to clear
- * Returns  : number of bytes NOT cleared
- */
-WEAK(__clear_user)
-		stm.w	(lr), [sp-]
-		stm.w	(r1), [sp-]
-		mov	r2, #0
-		csub.a	r1, #4
-		bsl	2f
-		and.a	ip, r0, #3
-		beq	1f
-		csub.a	ip, #2
-		strusr	r2, r0, 1
-		strusr	r2, r0, 1, el
-		strusr	r2, r0, 1, sl
-		rsub	ip, ip, #4
-		sub	r1, r1, ip		@  7  6  5  4  3  2  1
-1:		sub.a	r1, r1, #8		@ -1 -2 -3 -4 -5 -6 -7
-		strusr	r2, r0, 4, ns, rept=2
-		bns	1b
-		add.a	r1, r1, #4		@  3  2  1  0 -1 -2 -3
-		strusr	r2, r0, 4, ns
-2:		cand.a	r1, #2			@ 1x 1x 0x 0x 1x 1x 0x
-		strusr	r2, r0, 1, ne, rept=2
-		cand.a	r1, #1			@ x1 x0 x1 x0 x1 x0 x1
-		beq	3f
-USER(		stb.u	r2, [r0])
-3:		mov	r0, #0
-		ldm.w	(r1), [sp]+
-		ldm.w	(pc), [sp]+
-ENDPROC(__clear_user)
-
-		.pushsection .fixup,"ax"
-		.align	0
-9001:		ldm.w	(r0), [sp]+
-		ldm.w	(pc), [sp]+
-		.popsection
-
diff --git a/arch/unicore32/lib/copy_from_user.S b/arch/unicore32/lib/copy_from_user.S
deleted file mode 100644
index affb43920ac0..000000000000
--- a/arch/unicore32/lib/copy_from_user.S
+++ /dev/null
@@ -1,101 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/lib/copy_from_user.S
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-/*
- * Prototype:
- *
- *	size_t raw_copy_from_user(void *to, const void *from, size_t n)
- *
- * Purpose:
- *
- *	copy a block to kernel memory from user memory
- *
- * Params:
- *
- *	to = kernel memory
- *	from = user memory
- *	n = number of bytes to copy
- *
- * Return value:
- *
- *	Number of bytes NOT copied.
- */
-
-	.macro ldr1w ptr reg abort
-	ldrusr	\reg, \ptr, 4, abort=\abort
-	.endm
-
-	.macro ldr4w ptr reg1 reg2 reg3 reg4 abort
-100:	ldm.w	(\reg1, \reg2, \reg3, \reg4), [\ptr]+
-	.pushsection __ex_table, "a"
-	.align	3
-	.long 100b, \abort
-	.popsection
-	.endm
-
-	.macro ldr8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
-100:	ldm.w (\reg1, \reg2, \reg3, \reg4, \reg5, \reg6, \reg7, \reg8), [\ptr]+
-	.pushsection __ex_table, "a"
-	.align	3
-	.long 100b, \abort
-	.popsection
-	.endm
-
-	.macro ldr1b ptr reg cond=al abort
-	ldrusr	\reg, \ptr, 1, \cond, abort=\abort
-	.endm
-
-	.macro str1w ptr reg abort
-	stw.w \reg, [\ptr]+, #4
-	.endm
-
-	.macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
-	stm.w (\reg1, \reg2, \reg3, \reg4, \reg5, \reg6, \reg7, \reg8), [\ptr]+
-	.endm
-
-	.macro str1b ptr reg cond=al abort
-	.ifnc	\cond, al
-	b\cond	201f
-	b	202f
-	.endif
-201:	stb.w \reg, [\ptr]+, #1
-202:
-	.endm
-
-	.macro enter
-	mov	r3, #0
-	stm.w	(r0, r2, r3), [sp-]
-	.endm
-
-	.macro exit
-	add	sp, sp, #8
-	ldm.w	(r0), [sp]+
-	mov	pc, lr
-	.endm
-
-	.text
-
-ENTRY(raw_copy_from_user)
-
-#include "copy_template.S"
-
-ENDPROC(raw_copy_from_user)
-
-	.pushsection .fixup,"ax"
-	.align 0
-	copy_abort_preamble
-	ldm.w	(r1, r2, r3), [sp]+
-	sub	r0, r0, r1
-	rsub	r0, r0, r2
-	copy_abort_end
-	.popsection
-
diff --git a/arch/unicore32/lib/copy_page.S b/arch/unicore32/lib/copy_page.S
deleted file mode 100644
index dc163f2d1af0..000000000000
--- a/arch/unicore32/lib/copy_page.S
+++ /dev/null
@@ -1,36 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/lib/copy_page.S
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- *
- *  ASM optimised string functions
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <generated/asm-offsets.h>
-#include <asm/cache.h>
-
-#define COPY_COUNT (PAGE_SZ/256)
-
-		.text
-		.align	5
-/*
- * UniCore optimised copy_page routine
- */
-ENTRY(copy_page)
-		stm.w	(r17 - r19, lr), [sp-]
-		mov	r17, r0
-		mov	r18, r1
-		mov	r19, #COPY_COUNT
-1:
-	.rept	4
-		ldm.w	(r0 - r15), [r18]+
-		stm.w	(r0 - r15), [r17]+
-	.endr
-		sub.a	r19, r19, #1
-		bne	1b
-		ldm.w	(r17 - r19, pc), [sp]+
-ENDPROC(copy_page)
diff --git a/arch/unicore32/lib/copy_template.S b/arch/unicore32/lib/copy_template.S
deleted file mode 100644
index 02a7aef83fbf..000000000000
--- a/arch/unicore32/lib/copy_template.S
+++ /dev/null
@@ -1,211 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/lib/copy_template.S
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-
-/*
- * Theory of operation
- * -------------------
- *
- * This file provides the core code for a forward memory copy used in
- * the implementation of memcopy(), copy_to_user() and copy_from_user().
- *
- * The including file must define the following accessor macros
- * according to the need of the given function:
- *
- * ldr1w ptr reg abort
- *
- *	This loads one word from 'ptr', stores it in 'reg' and increments
- *	'ptr' to the next word. The 'abort' argument is used for fixup tables.
- *
- * ldr4w ptr reg1 reg2 reg3 reg4 abort
- * ldr8w ptr, reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
- *
- *	This loads four or eight words starting from 'ptr', stores them
- *	in provided registers and increments 'ptr' past those words.
- *	The'abort' argument is used for fixup tables.
- *
- * ldr1b ptr reg cond abort
- *
- *	Similar to ldr1w, but it loads a byte and increments 'ptr' one byte.
- *	It also must apply the condition code if provided, otherwise the
- *	"al" condition is assumed by default.
- *
- * str1w ptr reg abort
- * str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
- * str1b ptr reg cond abort
- *
- *	Same as their ldr* counterparts, but data is stored to 'ptr' location
- *	rather than being loaded.
- *
- * enter
- *
- *	Preserve the provided registers on the stack plus any additional
- *	data as needed by the implementation including this code. Called
- *	upon code entry.
- *
- * exit
- *
- *	Restore registers with the values previously saved with the
- *	'preserv' macro. Called upon code termination.
- */
-
-
-		enter
-
-		sub.a	r2, r2, #4
-		bsl	8f
-		and.a	ip, r0, #3
-		bne	9f
-		and.a	ip, r1, #3
-		bne	10f
-
-1:		sub.a	r2, r2, #(28)
-		stm.w	(r5 - r8), [sp-]
-		bsl	5f
-
-3:
-4:		ldr8w	r1, r3, r4, r5, r6, r7, r8, r10, r11, abort=20f
-		sub.a	r2, r2, #32
-		str8w	r0, r3, r4, r5, r6, r7, r8, r10, r11, abort=20f
-		beg	3b
-
-5:		and.a	ip, r2, #28
-		rsub	ip, ip, #32
-		beq	7f
-		add	pc, pc, ip		@ C is always clear here
-		nop
-
-		ldr1w	r1, r3, abort=20f
-		ldr1w	r1, r4, abort=20f
-		ldr1w	r1, r5, abort=20f
-		ldr1w	r1, r6, abort=20f
-		ldr1w	r1, r7, abort=20f
-		ldr1w	r1, r8, abort=20f
-		ldr1w	r1, r11, abort=20f
-
-		add	pc, pc, ip
-		nop
-
-		str1w	r0, r3, abort=20f
-		str1w	r0, r4, abort=20f
-		str1w	r0, r5, abort=20f
-		str1w	r0, r6, abort=20f
-		str1w	r0, r7, abort=20f
-		str1w	r0, r8, abort=20f
-		str1w	r0, r11, abort=20f
-
-7:		ldm.w	(r5 - r8), [sp]+
-
-8:		mov.a	r2, r2 << #31
-		ldr1b	r1, r3, ne, abort=21f
-		ldr1b	r1, r4, ea, abort=21f
-		ldr1b	r1, r10, ea, abort=21f
-		str1b	r0, r3, ne, abort=21f
-		str1b	r0, r4, ea, abort=21f
-		str1b	r0, r10, ea, abort=21f
-
-		exit
-
-9:		rsub	ip, ip, #4
-		csub.a	ip, #2
-		ldr1b	r1, r3, sg, abort=21f
-		ldr1b	r1, r4, eg, abort=21f
-		ldr1b	r1, r11, abort=21f
-		str1b	r0, r3, sg, abort=21f
-		str1b	r0, r4, eg, abort=21f
-		sub.a	r2, r2, ip
-		str1b	r0, r11, abort=21f
-		bsl	8b
-		and.a	ip, r1, #3
-		beq	1b
-
-10:		andn	r1, r1, #3
-		csub.a	ip, #2
-		ldr1w	r1, r11, abort=21f
-		beq	17f
-		bsg	18f
-
-
-		.macro	forward_copy_shift a b
-
-		sub.a	r2, r2, #28
-		bsl	14f
-
-11:		stm.w	(r5 - r9), [sp-]
-
-12:
-		ldr4w	r1, r4, r5, r6, r7, abort=19f
-		mov	r3, r11 pull #\a
-		sub.a	r2, r2, #32
-		ldr4w	r1, r8, r9, r10, r11, abort=19f
-		or	r3, r3, r4 push #\b
-		mov	r4, r4 pull #\a
-		or	r4, r4, r5 push #\b
-		mov	r5, r5 pull #\a
-		or	r5, r5, r6 push #\b
-		mov	r6, r6 pull #\a
-		or	r6, r6, r7 push #\b
-		mov	r7, r7 pull #\a
-		or	r7, r7, r8 push #\b
-		mov	r8, r8 pull #\a
-		or	r8, r8, r9 push #\b
-		mov	r9, r9 pull #\a
-		or	r9, r9, r10 push #\b
-		mov	r10, r10 pull #\a
-		or	r10, r10, r11 push #\b
-		str8w	r0, r3, r4, r5, r6, r7, r8, r9, r10, , abort=19f
-		beg	12b
-
-		ldm.w	(r5 - r9), [sp]+
-
-14:		and.a	ip, r2, #28
-		beq	16f
-
-15:		mov	r3, r11 pull #\a
-		ldr1w	r1, r11, abort=21f
-		sub.a	ip, ip, #4
-		or	r3, r3, r11 push #\b
-		str1w	r0, r3, abort=21f
-		bsg	15b
-
-16:		sub	r1, r1, #(\b / 8)
-		b	8b
-
-		.endm
-
-
-		forward_copy_shift	a=8	b=24
-
-17:		forward_copy_shift	a=16	b=16
-
-18:		forward_copy_shift	a=24	b=8
-
-
-/*
- * Abort preamble and completion macros.
- * If a fixup handler is required then those macros must surround it.
- * It is assumed that the fixup code will handle the private part of
- * the exit macro.
- */
-
-	.macro	copy_abort_preamble
-19:	ldm.w	(r5 - r9), [sp]+
-	b	21f
-299:	.word	0			@ store lr
-					@ to avoid function call in fixup
-20:	ldm.w	(r5 - r8), [sp]+
-21:
-	adr	r1, 299b
-	stw	lr, [r1]
-	.endm
-
-	.macro	copy_abort_end
-	adr	lr, 299b
-	ldw	pc, [lr]
-	.endm
-
diff --git a/arch/unicore32/lib/copy_to_user.S b/arch/unicore32/lib/copy_to_user.S
deleted file mode 100644
index c867f08f89ce..000000000000
--- a/arch/unicore32/lib/copy_to_user.S
+++ /dev/null
@@ -1,93 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/lib/copy_to_user.S
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-/*
- * Prototype:
- *
- *	size_t raw_copy_to_user(void *to, const void *from, size_t n)
- *
- * Purpose:
- *
- *	copy a block to user memory from kernel memory
- *
- * Params:
- *
- *	to = user memory
- *	from = kernel memory
- *	n = number of bytes to copy
- *
- * Return value:
- *
- *	Number of bytes NOT copied.
- */
-
-	.macro ldr1w ptr reg abort
-	ldw.w \reg, [\ptr]+, #4
-	.endm
-
-	.macro ldr4w ptr reg1 reg2 reg3 reg4 abort
-	ldm.w	(\reg1, \reg2, \reg3, \reg4), [\ptr]+
-	.endm
-
-	.macro ldr8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
-	ldm.w (\reg1, \reg2, \reg3, \reg4, \reg5, \reg6, \reg7, \reg8), [\ptr]+
-	.endm
-
-	.macro ldr1b ptr reg cond=al abort
-	notcond	\cond, .+8
-	ldb.w \reg, [\ptr]+, #1
-	.endm
-
-	.macro str1w ptr reg abort
-	strusr	\reg, \ptr, 4, abort=\abort
-	.endm
-
-	.macro str8w ptr reg1 reg2 reg3 reg4 reg5 reg6 reg7 reg8 abort
-100:	stm.w (\reg1, \reg2, \reg3, \reg4, \reg5, \reg6, \reg7, \reg8), [\ptr]+
-
-	.pushsection __ex_table, "a"
-	.long 100b, \abort
-	.popsection
-	.endm
-
-	.macro str1b ptr reg cond=al abort
-	strusr	\reg, \ptr, 1, \cond, abort=\abort
-	.endm
-
-	.macro enter
-	mov	r3, #0
-	stm.w	(r0, r2, r3), [sp-]
-	.endm
-
-	.macro exit
-	add	sp, sp, #8
-	ldm.w	(r0), [sp]+
-	mov	pc, lr
-	.endm
-
-	.text
-
-WEAK(raw_copy_to_user)
-
-#include "copy_template.S"
-
-ENDPROC(raw_copy_to_user)
-
-	.pushsection .fixup,"ax"
-	.align 0
-	copy_abort_preamble
-	ldm.w	(r1, r2, r3), [sp]+
-	sub	r0, r0, r1
-	rsub	r0, r0, r2
-	copy_abort_end
-	.popsection
-
diff --git a/arch/unicore32/lib/delay.S b/arch/unicore32/lib/delay.S
deleted file mode 100644
index 6a359dd034e5..000000000000
--- a/arch/unicore32/lib/delay.S
+++ /dev/null
@@ -1,48 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/lib/delay.S
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <asm/param.h>
-		.text
-
-.LC0:		.word	loops_per_jiffy
-.LC1:		.word	(2199023*HZ)>>11
-
-/*
- * r0  <= 2000
- * lpj <= 0x01ffffff (max. 3355 bogomips)
- * HZ  <= 1000
- */
-
-ENTRY(__udelay)
-		ldw	r2, .LC1
-		mul	r0, r2, r0
-ENTRY(__const_udelay)				@ 0 <= r0 <= 0x7fffff06
-		ldw	r2, .LC0
-		ldw	r2, [r2]		@ max = 0x01ffffff
-		mov	r0, r0 >> #14		@ max = 0x0001ffff
-		mov	r2, r2 >> #10		@ max = 0x00007fff
-		mul	r0, r2, r0		@ max = 2^32-1
-		mov.a	r0, r0 >> #6
-		cmoveq	pc, lr
-
-/*
- * loops = r0 * HZ * loops_per_jiffy / 1000000
- *
- * Oh, if only we had a cycle counter...
- */
-
-@ Delay routine
-ENTRY(__delay)
-		sub.a	r0, r0, #2
-		bua	__delay
-		mov	pc, lr
-ENDPROC(__udelay)
-ENDPROC(__const_udelay)
-ENDPROC(__delay)
diff --git a/arch/unicore32/lib/findbit.S b/arch/unicore32/lib/findbit.S
deleted file mode 100644
index 42f1282670d2..000000000000
--- a/arch/unicore32/lib/findbit.S
+++ /dev/null
@@ -1,97 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/lib/findbit.S
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-                .text
-
-/*
- * Purpose  : Find a 'zero' bit
- * Prototype: int find_first_zero_bit(void *addr, unsigned int maxbit);
- */
-ENTRY(find_first_zero_bit)
-		cxor.a	r1, #0
-		beq	3f
-		mov	r2, #0
-1:		ldb	r3, [r0+], r2 >> #3
-		xor.a	r3, r3, #0xff		@ invert bits
-		bne	.L_found		@ any now set - found zero bit
-		add	r2, r2, #8		@ next bit pointer
-2:		csub.a	r2, r1			@ any more?
-		bub	1b
-3:		mov	r0, r1			@ no free bits
-		mov	pc, lr
-ENDPROC(find_first_zero_bit)
-
-/*
- * Purpose  : Find next 'zero' bit
- * Prototype: int find_next_zero_bit
- *		(void *addr, unsigned int maxbit, int offset)
- */
-ENTRY(find_next_zero_bit)
-		cxor.a	r1, #0
-		beq	3b
-		and.a	ip, r2, #7
-		beq	1b			@ If new byte, goto old routine
-		ldb	r3, [r0+], r2 >> #3
-		xor	r3, r3, #0xff		@ now looking for a 1 bit
-		mov.a	r3, r3 >> ip		@ shift off unused bits
-		bne	.L_found
-		or	r2, r2, #7		@ if zero, then no bits here
-		add	r2, r2, #1		@ align bit pointer
-		b	2b			@ loop for next bit
-ENDPROC(find_next_zero_bit)
-
-/*
- * Purpose  : Find a 'one' bit
- * Prototype: int find_first_bit
- *		(const unsigned long *addr, unsigned int maxbit);
- */
-ENTRY(find_first_bit)
-		cxor.a	r1, #0
-		beq	3f
-		mov	r2, #0
-1:		ldb	r3, [r0+], r2 >> #3
-		mov.a	r3, r3
-		bne	.L_found		@ any now set - found zero bit
-		add	r2, r2, #8		@ next bit pointer
-2:		csub.a	r2, r1			@ any more?
-		bub	1b
-3:		mov	r0, r1			@ no free bits
-		mov	pc, lr
-ENDPROC(find_first_bit)
-
-/*
- * Purpose  : Find next 'one' bit
- * Prototype: int find_next_zero_bit
- *		(void *addr, unsigned int maxbit, int offset)
- */
-ENTRY(find_next_bit)
-		cxor.a	r1, #0
-		beq	3b
-		and.a	ip, r2, #7
-		beq	1b			@ If new byte, goto old routine
-		ldb	r3, [r0+], r2 >> #3
-		mov.a	r3, r3 >> ip		@ shift off unused bits
-		bne	.L_found
-		or	r2, r2, #7		@ if zero, then no bits here
-		add	r2, r2, #1		@ align bit pointer
-		b	2b			@ loop for next bit
-ENDPROC(find_next_bit)
-
-/*
- * One or more bits in the LSB of r3 are assumed to be set.
- */
-.L_found:
-		rsub	r1, r3, #0
-		and	r3, r3, r1
-		cntlz	r3, r3
-		rsub	r3, r3, #31
-		add	r0, r2, r3
-		mov	pc, lr
-
diff --git a/arch/unicore32/lib/strncpy_from_user.S b/arch/unicore32/lib/strncpy_from_user.S
deleted file mode 100644
index f227b8227a4c..000000000000
--- a/arch/unicore32/lib/strncpy_from_user.S
+++ /dev/null
@@ -1,42 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/lib/strncpy_from_user.S
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <asm/errno.h>
-
-	.text
-	.align	5
-
-/*
- * Copy a string from user space to kernel space.
- *  r0 = dst, r1 = src, r2 = byte length
- * returns the number of characters copied (strlen of copied string),
- *  -EFAULT on exception, or "len" if we fill the whole buffer
- */
-ENTRY(__strncpy_from_user)
-	mov	ip, r1
-1:	sub.a	r2, r2, #1
-	ldrusr	r3, r1, 1, ns
-	bfs	2f
-	stb.w	r3, [r0]+, #1
-	cxor.a	r3, #0
-	bne	1b
-	sub	r1, r1, #1	@ take NUL character out of count
-2:	sub	r0, r1, ip
-	mov	pc, lr
-ENDPROC(__strncpy_from_user)
-
-	.pushsection .fixup,"ax"
-	.align	0
-9001:	mov	r3, #0
-	stb	r3, [r0+], #0	@ null terminate
-	mov	r0, #-EFAULT
-	mov	pc, lr
-	.popsection
-
diff --git a/arch/unicore32/lib/strnlen_user.S b/arch/unicore32/lib/strnlen_user.S
deleted file mode 100644
index c836b12776fe..000000000000
--- a/arch/unicore32/lib/strnlen_user.S
+++ /dev/null
@@ -1,39 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/lib/strnlen_user.S
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <asm/errno.h>
-
-	.text
-	.align	5
-
-/* Prototype: unsigned long __strnlen_user(const char *str, long n)
- * Purpose  : get length of a string in user memory
- * Params   : str - address of string in user memory
- * Returns  : length of string *including terminator*
- *	      or zero on exception, or n + 1 if too long
- */
-ENTRY(__strnlen_user)
-	mov	r2, r0
-1:
-	ldrusr	r3, r0, 1
-	cxor.a	r3, #0
-	beq	2f
-	sub.a	r1, r1, #1
-	bne	1b
-	add	r0, r0, #1
-2:	sub	r0, r0, r2
-	mov	pc, lr
-ENDPROC(__strnlen_user)
-
-	.pushsection .fixup,"ax"
-	.align	0
-9001:	mov	r0, #0
-	mov	pc, lr
-	.popsection
diff --git a/arch/unicore32/mm/Kconfig b/arch/unicore32/mm/Kconfig
deleted file mode 100644
index 82759b6aba67..000000000000
--- a/arch/unicore32/mm/Kconfig
+++ /dev/null
@@ -1,41 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-comment "Processor Type"
-
-# Select CPU types depending on the architecture selected.  This selects
-# which CPUs we support in the kernel image, and the compiler instruction
-# optimiser behaviour.
-
-config CPU_UCV2
-	def_bool y
-
-comment "Processor Features"
-
-config CPU_ICACHE_DISABLE
-	bool "Disable I-Cache (I-bit)"
-	help
-	  Say Y here to disable the processor instruction cache. Unless
-	  you have a reason not to or are unsure, say N.
-
-config CPU_DCACHE_DISABLE
-	bool "Disable D-Cache (D-bit)"
-	help
-	  Say Y here to disable the processor data cache. Unless
-	  you have a reason not to or are unsure, say N.
-
-config CPU_DCACHE_WRITETHROUGH
-	bool "Force write through D-cache"
-	help
-	  Say Y here to use the data cache in writethrough mode. Unless you
-	  specifically require this or are unsure, say N.
-
-config CPU_DCACHE_LINE_DISABLE
-	bool "Disable D-cache line ops"
-	default y
-	help
-	  Say Y here to disable the data cache line operations.
-
-config CPU_TLB_SINGLE_ENTRY_DISABLE
-	bool "Disable TLB single entry ops"
-	default y
-	help
-	  Say Y here to disable the TLB single entry operations.
diff --git a/arch/unicore32/mm/Makefile b/arch/unicore32/mm/Makefile
deleted file mode 100644
index 8106260583ab..000000000000
--- a/arch/unicore32/mm/Makefile
+++ /dev/null
@@ -1,14 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the linux unicore-specific parts of the memory manager.
-#
-
-obj-y				:= extable.o fault.o init.o pgd.o mmu.o
-obj-y				+= flush.o ioremap.o
-
-obj-$(CONFIG_MODULES)		+= proc-syms.o
-
-obj-$(CONFIG_ALIGNMENT_TRAP)	+= alignment.o
-
-obj-$(CONFIG_CPU_UCV2)		+= cache-ucv2.o tlb-ucv2.o proc-ucv2.o
-
diff --git a/arch/unicore32/mm/alignment.c b/arch/unicore32/mm/alignment.c
deleted file mode 100644
index 2ea98f7a4156..000000000000
--- a/arch/unicore32/mm/alignment.c
+++ /dev/null
@@ -1,524 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/mm/alignment.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-/*
- * TODO:
- *  FPU ldm/stm not handling
- */
-#include <linux/compiler.h>
-#include <linux/kernel.h>
-#include <linux/sched/debug.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/uaccess.h>
-#include <linux/pgtable.h>
-
-#include <asm/tlbflush.h>
-#include <asm/unaligned.h>
-
-#include "mm.h"
-
-#define CODING_BITS(i)	(i & 0xe0000120)
-
-#define LDST_P_BIT(i)	(i & (1 << 28))	/* Preindex             */
-#define LDST_U_BIT(i)	(i & (1 << 27))	/* Add offset           */
-#define LDST_W_BIT(i)	(i & (1 << 25))	/* Writeback            */
-#define LDST_L_BIT(i)	(i & (1 << 24))	/* Load                 */
-
-#define LDST_P_EQ_U(i)	((((i) ^ ((i) >> 1)) & (1 << 27)) == 0)
-
-#define LDSTH_I_BIT(i)	(i & (1 << 26))	/* half-word immed      */
-#define LDM_S_BIT(i)	(i & (1 << 26))	/* write ASR from BSR */
-#define LDM_H_BIT(i)	(i & (1 << 6))	/* select r0-r15 or r16-r31 */
-
-#define RN_BITS(i)	((i >> 19) & 31)	/* Rn                   */
-#define RD_BITS(i)	((i >> 14) & 31)	/* Rd                   */
-#define RM_BITS(i)	(i & 31)	/* Rm                   */
-
-#define REGMASK_BITS(i)	(((i & 0x7fe00) >> 3) | (i & 0x3f))
-#define OFFSET_BITS(i)	(i & 0x03fff)
-
-#define SHIFT_BITS(i)	((i >> 9) & 0x1f)
-#define SHIFT_TYPE(i)	(i & 0xc0)
-#define SHIFT_LSL	0x00
-#define SHIFT_LSR	0x40
-#define SHIFT_ASR	0x80
-#define SHIFT_RORRRX	0xc0
-
-union offset_union {
-	unsigned long un;
-	signed long sn;
-};
-
-#define TYPE_ERROR	0
-#define TYPE_FAULT	1
-#define TYPE_LDST	2
-#define TYPE_DONE	3
-#define TYPE_SWAP  4
-#define TYPE_COLS  5		/* Coprocessor load/store */
-
-#define get8_unaligned_check(val, addr, err)		\
-	__asm__(					\
-	"1:	ldb.u	%1, [%2], #1\n"			\
-	"2:\n"						\
-	"	.pushsection .fixup,\"ax\"\n"		\
-	"	.align	2\n"				\
-	"3:	mov	%0, #1\n"			\
-	"	b	2b\n"				\
-	"	.popsection\n"				\
-	"	.pushsection __ex_table,\"a\"\n"		\
-	"	.align	3\n"				\
-	"	.long	1b, 3b\n"			\
-	"	.popsection\n"				\
-	: "=r" (err), "=&r" (val), "=r" (addr)		\
-	: "0" (err), "2" (addr))
-
-#define get8t_unaligned_check(val, addr, err)		\
-	__asm__(					\
-	"1:	ldb.u	%1, [%2], #1\n"			\
-	"2:\n"						\
-	"	.pushsection .fixup,\"ax\"\n"		\
-	"	.align	2\n"				\
-	"3:	mov	%0, #1\n"			\
-	"	b	2b\n"				\
-	"	.popsection\n"				\
-	"	.pushsection __ex_table,\"a\"\n"		\
-	"	.align	3\n"				\
-	"	.long	1b, 3b\n"			\
-	"	.popsection\n"				\
-	: "=r" (err), "=&r" (val), "=r" (addr)		\
-	: "0" (err), "2" (addr))
-
-#define get16_unaligned_check(val, addr)			\
-	do {							\
-		unsigned int err = 0, v, a = addr;		\
-		get8_unaligned_check(val, a, err);		\
-		get8_unaligned_check(v, a, err);		\
-		val |= v << 8;					\
-		if (err)					\
-			goto fault;				\
-	} while (0)
-
-#define put16_unaligned_check(val, addr)			\
-	do {							\
-		unsigned int err = 0, v = val, a = addr;	\
-		__asm__(					\
-		"1:	stb.u	%1, [%2], #1\n"			\
-		"	mov	%1, %1 >> #8\n"			\
-		"2:	stb.u	%1, [%2]\n"			\
-		"3:\n"						\
-		"	.pushsection .fixup,\"ax\"\n"		\
-		"	.align	2\n"				\
-		"4:	mov	%0, #1\n"			\
-		"	b	3b\n"				\
-		"	.popsection\n"				\
-		"	.pushsection __ex_table,\"a\"\n"		\
-		"	.align	3\n"				\
-		"	.long	1b, 4b\n"			\
-		"	.long	2b, 4b\n"			\
-		"	.popsection\n"				\
-		: "=r" (err), "=&r" (v), "=&r" (a)		\
-		: "0" (err), "1" (v), "2" (a));			\
-		if (err)					\
-			goto fault;				\
-	} while (0)
-
-#define __put32_unaligned_check(ins, val, addr)			\
-	do {							\
-		unsigned int err = 0, v = val, a = addr;	\
-		__asm__(					\
-		"1:	"ins"	%1, [%2], #1\n"			\
-		"	mov	%1, %1 >> #8\n"			\
-		"2:	"ins"	%1, [%2], #1\n"			\
-		"	mov	%1, %1 >> #8\n"			\
-		"3:	"ins"	%1, [%2], #1\n"			\
-		"	mov	%1, %1 >> #8\n"			\
-		"4:	"ins"	%1, [%2]\n"			\
-		"5:\n"						\
-		"	.pushsection .fixup,\"ax\"\n"		\
-		"	.align	2\n"				\
-		"6:	mov	%0, #1\n"			\
-		"	b	5b\n"				\
-		"	.popsection\n"				\
-		"	.pushsection __ex_table,\"a\"\n"		\
-		"	.align	3\n"				\
-		"	.long	1b, 6b\n"			\
-		"	.long	2b, 6b\n"			\
-		"	.long	3b, 6b\n"			\
-		"	.long	4b, 6b\n"			\
-		"	.popsection\n"				\
-		: "=r" (err), "=&r" (v), "=&r" (a)		\
-		: "0" (err), "1" (v), "2" (a));			\
-		if (err)					\
-			goto fault;				\
-	} while (0)
-
-#define get32_unaligned_check(val, addr)			\
-	do {							\
-		unsigned int err = 0, v, a = addr;		\
-		get8_unaligned_check(val, a, err);		\
-		get8_unaligned_check(v, a, err);		\
-		val |= v << 8;					\
-		get8_unaligned_check(v, a, err);		\
-		val |= v << 16;					\
-		get8_unaligned_check(v, a, err);		\
-		val |= v << 24;					\
-		if (err)					\
-			goto fault;				\
-	} while (0)
-
-#define put32_unaligned_check(val, addr)			\
-	__put32_unaligned_check("stb.u", val, addr)
-
-#define get32t_unaligned_check(val, addr)			\
-	do {							\
-		unsigned int err = 0, v, a = addr;		\
-		get8t_unaligned_check(val, a, err);		\
-		get8t_unaligned_check(v, a, err);		\
-		val |= v << 8;					\
-		get8t_unaligned_check(v, a, err);		\
-		val |= v << 16;					\
-		get8t_unaligned_check(v, a, err);		\
-		val |= v << 24;					\
-		if (err)					\
-			goto fault;				\
-	} while (0)
-
-#define put32t_unaligned_check(val, addr)			\
-	__put32_unaligned_check("stb.u", val, addr)
-
-static void
-do_alignment_finish_ldst(unsigned long addr, unsigned long instr,
-			 struct pt_regs *regs, union offset_union offset)
-{
-	if (!LDST_U_BIT(instr))
-		offset.un = -offset.un;
-
-	if (!LDST_P_BIT(instr))
-		addr += offset.un;
-
-	if (!LDST_P_BIT(instr) || LDST_W_BIT(instr))
-		regs->uregs[RN_BITS(instr)] = addr;
-}
-
-static int
-do_alignment_ldrhstrh(unsigned long addr, unsigned long instr,
-		      struct pt_regs *regs)
-{
-	unsigned int rd = RD_BITS(instr);
-
-	/* old value 0x40002120, can't judge swap instr correctly */
-	if ((instr & 0x4b003fe0) == 0x40000120)
-		goto swp;
-
-	if (LDST_L_BIT(instr)) {
-		unsigned long val;
-		get16_unaligned_check(val, addr);
-
-		/* signed half-word? */
-		if (instr & 0x80)
-			val = (signed long)((signed short)val);
-
-		regs->uregs[rd] = val;
-	} else
-		put16_unaligned_check(regs->uregs[rd], addr);
-
-	return TYPE_LDST;
-
-swp:
-	/* only handle swap word
-	 * for swap byte should not active this alignment exception */
-	get32_unaligned_check(regs->uregs[RD_BITS(instr)], addr);
-	put32_unaligned_check(regs->uregs[RM_BITS(instr)], addr);
-	return TYPE_SWAP;
-
-fault:
-	return TYPE_FAULT;
-}
-
-static int
-do_alignment_ldrstr(unsigned long addr, unsigned long instr,
-		    struct pt_regs *regs)
-{
-	unsigned int rd = RD_BITS(instr);
-
-	if (!LDST_P_BIT(instr) && LDST_W_BIT(instr))
-		goto trans;
-
-	if (LDST_L_BIT(instr))
-		get32_unaligned_check(regs->uregs[rd], addr);
-	else
-		put32_unaligned_check(regs->uregs[rd], addr);
-	return TYPE_LDST;
-
-trans:
-	if (LDST_L_BIT(instr))
-		get32t_unaligned_check(regs->uregs[rd], addr);
-	else
-		put32t_unaligned_check(regs->uregs[rd], addr);
-	return TYPE_LDST;
-
-fault:
-	return TYPE_FAULT;
-}
-
-/*
- * LDM/STM alignment handler.
- *
- * There are 4 variants of this instruction:
- *
- * B = rn pointer before instruction, A = rn pointer after instruction
- *              ------ increasing address ----->
- *	        |    | r0 | r1 | ... | rx |    |
- * PU = 01             B                    A
- * PU = 11        B                    A
- * PU = 00        A                    B
- * PU = 10             A                    B
- */
-static int
-do_alignment_ldmstm(unsigned long addr, unsigned long instr,
-		    struct pt_regs *regs)
-{
-	unsigned int rd, rn, pc_correction, reg_correction, nr_regs, regbits;
-	unsigned long eaddr, newaddr;
-
-	if (LDM_S_BIT(instr))
-		goto bad;
-
-	pc_correction = 4;	/* processor implementation defined */
-
-	/* count the number of registers in the mask to be transferred */
-	nr_regs = hweight16(REGMASK_BITS(instr)) * 4;
-
-	rn = RN_BITS(instr);
-	newaddr = eaddr = regs->uregs[rn];
-
-	if (!LDST_U_BIT(instr))
-		nr_regs = -nr_regs;
-	newaddr += nr_regs;
-	if (!LDST_U_BIT(instr))
-		eaddr = newaddr;
-
-	if (LDST_P_EQ_U(instr))	/* U = P */
-		eaddr += 4;
-
-	/*
-	 * This is a "hint" - we already have eaddr worked out by the
-	 * processor for us.
-	 */
-	if (addr != eaddr) {
-		printk(KERN_ERR "LDMSTM: PC = %08lx, instr = %08lx, "
-		       "addr = %08lx, eaddr = %08lx\n",
-		       instruction_pointer(regs), instr, addr, eaddr);
-		show_regs(regs);
-	}
-
-	if (LDM_H_BIT(instr))
-		reg_correction = 0x10;
-	else
-		reg_correction = 0x00;
-
-	for (regbits = REGMASK_BITS(instr), rd = 0; regbits;
-	     regbits >>= 1, rd += 1)
-		if (regbits & 1) {
-			if (LDST_L_BIT(instr))
-				get32_unaligned_check(regs->
-					uregs[rd + reg_correction], eaddr);
-			else
-				put32_unaligned_check(regs->
-					uregs[rd + reg_correction], eaddr);
-			eaddr += 4;
-		}
-
-	if (LDST_W_BIT(instr))
-		regs->uregs[rn] = newaddr;
-	return TYPE_DONE;
-
-fault:
-	regs->UCreg_pc -= pc_correction;
-	return TYPE_FAULT;
-
-bad:
-	printk(KERN_ERR "Alignment trap: not handling ldm with s-bit set\n");
-	return TYPE_ERROR;
-}
-
-static int
-do_alignment(unsigned long addr, unsigned int error_code, struct pt_regs *regs)
-{
-	union offset_union offset;
-	unsigned long instr, instrptr;
-	int (*handler) (unsigned long addr, unsigned long instr,
-			struct pt_regs *regs);
-	unsigned int type;
-
-	instrptr = instruction_pointer(regs);
-	if (instrptr >= PAGE_OFFSET)
-		instr = *(unsigned long *)instrptr;
-	else {
-		__asm__ __volatile__(
-				"ldw.u	%0, [%1]\n"
-				: "=&r"(instr)
-				: "r"(instrptr));
-	}
-
-	regs->UCreg_pc += 4;
-
-	switch (CODING_BITS(instr)) {
-	case 0x40000120:	/* ldrh or strh */
-		if (LDSTH_I_BIT(instr))
-			offset.un = (instr & 0x3e00) >> 4 | (instr & 31);
-		else
-			offset.un = regs->uregs[RM_BITS(instr)];
-		handler = do_alignment_ldrhstrh;
-		break;
-
-	case 0x60000000:	/* ldr or str immediate */
-	case 0x60000100:	/* ldr or str immediate */
-	case 0x60000020:	/* ldr or str immediate */
-	case 0x60000120:	/* ldr or str immediate */
-		offset.un = OFFSET_BITS(instr);
-		handler = do_alignment_ldrstr;
-		break;
-
-	case 0x40000000:	/* ldr or str register */
-		offset.un = regs->uregs[RM_BITS(instr)];
-		{
-			unsigned int shiftval = SHIFT_BITS(instr);
-
-			switch (SHIFT_TYPE(instr)) {
-			case SHIFT_LSL:
-				offset.un <<= shiftval;
-				break;
-
-			case SHIFT_LSR:
-				offset.un >>= shiftval;
-				break;
-
-			case SHIFT_ASR:
-				offset.sn >>= shiftval;
-				break;
-
-			case SHIFT_RORRRX:
-				if (shiftval == 0) {
-					offset.un >>= 1;
-					if (regs->UCreg_asr & PSR_C_BIT)
-						offset.un |= 1 << 31;
-				} else
-					offset.un = offset.un >> shiftval |
-					    offset.un << (32 - shiftval);
-				break;
-			}
-		}
-		handler = do_alignment_ldrstr;
-		break;
-
-	case 0x80000000:	/* ldm or stm */
-	case 0x80000020:	/* ldm or stm */
-		handler = do_alignment_ldmstm;
-		break;
-
-	default:
-		goto bad;
-	}
-
-	type = handler(addr, instr, regs);
-
-	if (type == TYPE_ERROR || type == TYPE_FAULT)
-		goto bad_or_fault;
-
-	if (type == TYPE_LDST)
-		do_alignment_finish_ldst(addr, instr, regs, offset);
-
-	return 0;
-
-bad_or_fault:
-	if (type == TYPE_ERROR)
-		goto bad;
-	regs->UCreg_pc -= 4;
-	/*
-	 * We got a fault - fix it up, or die.
-	 */
-	do_bad_area(addr, error_code, regs);
-	return 0;
-
-bad:
-	/*
-	 * Oops, we didn't handle the instruction.
-	 * However, we must handle fpu instr firstly.
-	 */
-#ifdef CONFIG_UNICORE_FPU_F64
-	/* handle co.load/store */
-#define CODING_COLS                0xc0000000
-#define COLS_OFFSET_BITS(i)	(i & 0x1FF)
-#define COLS_L_BITS(i)		(i & (1<<24))
-#define COLS_FN_BITS(i)		((i>>14) & 31)
-	if ((instr & 0xe0000000) == CODING_COLS) {
-		unsigned int fn = COLS_FN_BITS(instr);
-		unsigned long val = 0;
-		if (COLS_L_BITS(instr)) {
-			get32t_unaligned_check(val, addr);
-			switch (fn) {
-#define ASM_MTF(n)	case n:						\
-			__asm__ __volatile__("MTF %0, F" __stringify(n)	\
-				: : "r"(val));				\
-			break;
-			ASM_MTF(0); ASM_MTF(1); ASM_MTF(2); ASM_MTF(3);
-			ASM_MTF(4); ASM_MTF(5); ASM_MTF(6); ASM_MTF(7);
-			ASM_MTF(8); ASM_MTF(9); ASM_MTF(10); ASM_MTF(11);
-			ASM_MTF(12); ASM_MTF(13); ASM_MTF(14); ASM_MTF(15);
-			ASM_MTF(16); ASM_MTF(17); ASM_MTF(18); ASM_MTF(19);
-			ASM_MTF(20); ASM_MTF(21); ASM_MTF(22); ASM_MTF(23);
-			ASM_MTF(24); ASM_MTF(25); ASM_MTF(26); ASM_MTF(27);
-			ASM_MTF(28); ASM_MTF(29); ASM_MTF(30); ASM_MTF(31);
-#undef ASM_MTF
-			}
-		} else {
-			switch (fn) {
-#define ASM_MFF(n)	case n:						\
-			__asm__ __volatile__("MFF %0, F" __stringify(n)	\
-				: : "r"(val));				\
-			break;
-			ASM_MFF(0); ASM_MFF(1); ASM_MFF(2); ASM_MFF(3);
-			ASM_MFF(4); ASM_MFF(5); ASM_MFF(6); ASM_MFF(7);
-			ASM_MFF(8); ASM_MFF(9); ASM_MFF(10); ASM_MFF(11);
-			ASM_MFF(12); ASM_MFF(13); ASM_MFF(14); ASM_MFF(15);
-			ASM_MFF(16); ASM_MFF(17); ASM_MFF(18); ASM_MFF(19);
-			ASM_MFF(20); ASM_MFF(21); ASM_MFF(22); ASM_MFF(23);
-			ASM_MFF(24); ASM_MFF(25); ASM_MFF(26); ASM_MFF(27);
-			ASM_MFF(28); ASM_MFF(29); ASM_MFF(30); ASM_MFF(31);
-#undef ASM_MFF
-			}
-			put32t_unaligned_check(val, addr);
-		}
-		return TYPE_COLS;
-	}
-fault:
-	return TYPE_FAULT;
-#endif
-	printk(KERN_ERR "Alignment trap: not handling instruction "
-	       "%08lx at [<%08lx>]\n", instr, instrptr);
-	return 1;
-}
-
-/*
- * This needs to be done after sysctl_init, otherwise sys/ will be
- * overwritten.  Actually, this shouldn't be in sys/ at all since
- * it isn't a sysctl, and it doesn't contain sysctl information.
- */
-static int __init alignment_init(void)
-{
-	hook_fault_code(1, do_alignment, SIGBUS, BUS_ADRALN,
-			"alignment exception");
-
-	return 0;
-}
-
-fs_initcall(alignment_init);
diff --git a/arch/unicore32/mm/cache-ucv2.S b/arch/unicore32/mm/cache-ucv2.S
deleted file mode 100644
index 2108837d6f4f..000000000000
--- a/arch/unicore32/mm/cache-ucv2.S
+++ /dev/null
@@ -1,209 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/mm/cache-ucv2.S
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- *
- *  This is the "shell" of the UniCore-v2 processor support.
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/assembler.h>
-#include <asm/page.h>
-
-#include "proc-macros.S"
-
-/*
- *	__cpuc_flush_icache_all()
- *	__cpuc_flush_kern_all()
- *	__cpuc_flush_user_all()
- *
- *	Flush the entire cache.
- */
-ENTRY(__cpuc_flush_icache_all)
-	/*FALLTHROUGH*/
-ENTRY(__cpuc_flush_kern_all)
-	/*FALLTHROUGH*/
-ENTRY(__cpuc_flush_user_all)
-	mov	r0, #0
-	movc	p0.c5, r0, #14			@ Dcache flush all
-	nop8
-
-	mov	r0, #0
-	movc	p0.c5, r0, #20			@ Icache invalidate all
-	nop8
-
-	mov	pc, lr
-
-/*
- *	__cpuc_flush_user_range(start, end, flags)
- *
- *	Flush a range of TLB entries in the specified address space.
- *
- *	- start - start address (may not be aligned)
- *	- end   - end address (exclusive, may not be aligned)
- *	- flags	- vm_area_struct flags describing address space
- */
-ENTRY(__cpuc_flush_user_range)
-	cxor.a	r2, #0
-	beq	__cpuc_dma_flush_range
-
-#ifndef CONFIG_CPU_DCACHE_LINE_DISABLE
-	andn	r0, r0, #CACHE_LINESIZE - 1	@ Safety check
-	sub	r1, r1, r0
-	csub.a	r1, #MAX_AREA_SIZE
-	bsg	2f
-
-	andn	r1, r1, #CACHE_LINESIZE - 1
-	add	r1, r1, #CACHE_LINESIZE
-
-101:	dcacheline_flush	r0, r11, r12
-
-	add	r0, r0, #CACHE_LINESIZE
-	sub.a	r1, r1, #CACHE_LINESIZE
-	bns	101b
-	b	3f
-#endif
-2:	mov	ip, #0
-	movc	p0.c5, ip, #14			@ Dcache flush all
-	nop8
-
-3:	mov	ip, #0
-	movc	p0.c5, ip, #20			@ Icache invalidate all
-	nop8
-
-	mov	pc, lr
-
-/*
- *	__cpuc_coherent_kern_range(start,end)
- *	__cpuc_coherent_user_range(start,end)
- *
- *	Ensure that the I and D caches are coherent within specified
- *	region.  This is typically used when code has been written to
- *	a memory region, and will be executed.
- *
- *	- start   - virtual start address of region
- *	- end     - virtual end address of region
- */
-ENTRY(__cpuc_coherent_kern_range)
-	/* FALLTHROUGH */
-ENTRY(__cpuc_coherent_user_range)
-#ifndef CONFIG_CPU_DCACHE_LINE_DISABLE
-	andn	r0, r0, #CACHE_LINESIZE - 1	@ Safety check
-	sub	r1, r1, r0
-	csub.a	r1, #MAX_AREA_SIZE
-	bsg	2f
-
-	andn	r1, r1, #CACHE_LINESIZE - 1
-	add	r1, r1, #CACHE_LINESIZE
-
-	@ r0 va2pa r10
-	mov	r9, #PAGE_SZ
-	sub	r9, r9, #1			@ PAGE_MASK
-101:	va2pa	r0, r10, r11, r12, r13, 2f	@ r10 is PA
-	b	103f
-102:	cand.a	r0, r9
-	beq	101b
-
-103:	movc	p0.c5, r10, #11			@ Dcache clean line of R10
-	nop8
-
-	add	r0, r0, #CACHE_LINESIZE
-	add	r10, r10, #CACHE_LINESIZE
-	sub.a	r1, r1, #CACHE_LINESIZE
-	bns	102b
-	b	3f
-#endif
-2:	mov	ip, #0
-	movc	p0.c5, ip, #10			@ Dcache clean all
-	nop8
-
-3:	mov	ip, #0
-	movc	p0.c5, ip, #20			@ Icache invalidate all
-	nop8
-
-	mov	pc, lr
-
-/*
- *	__cpuc_flush_kern_dcache_area(void *addr, size_t size)
- *
- *	- addr	- kernel address
- *	- size	- region size
- */
-ENTRY(__cpuc_flush_kern_dcache_area)
-	mov	ip, #0
-	movc	p0.c5, ip, #14			@ Dcache flush all
-	nop8
-	mov	pc, lr
-
-/*
- *	__cpuc_dma_clean_range(start,end)
- *	- start   - virtual start address of region
- *	- end     - virtual end address of region
- */
-ENTRY(__cpuc_dma_clean_range)
-#ifndef CONFIG_CPU_DCACHE_LINE_DISABLE
-	andn	r0, r0, #CACHE_LINESIZE - 1
-	sub	r1, r1, r0
-	andn	r1, r1, #CACHE_LINESIZE - 1
-	add	r1, r1, #CACHE_LINESIZE
-
-	csub.a	r1, #MAX_AREA_SIZE
-	bsg	2f
-
-	@ r0 va2pa r10
-	mov	r9, #PAGE_SZ
-	sub	r9, r9, #1			@ PAGE_MASK
-101:	va2pa	r0, r10, r11, r12, r13, 2f	@ r10 is PA
-	b	1f
-102:	cand.a	r0, r9
-	beq	101b
-
-1:	movc	p0.c5, r10, #11			@ Dcache clean line of R10
-	nop8
-	add	r0, r0, #CACHE_LINESIZE
-	add	r10, r10, #CACHE_LINESIZE
-	sub.a	r1, r1, #CACHE_LINESIZE
-	bns	102b
-	mov	pc, lr
-#endif
-2:	mov	ip, #0
-	movc	p0.c5, ip, #10			@ Dcache clean all
-	nop8
-
-	mov	pc, lr
-
-/*
- *	__cpuc_dma_inv_range(start,end)
- *	__cpuc_dma_flush_range(start,end)
- *	- start   - virtual start address of region
- *	- end     - virtual end address of region
- */
-__cpuc_dma_inv_range:
-	/* FALLTHROUGH */
-ENTRY(__cpuc_dma_flush_range)
-#ifndef CONFIG_CPU_DCACHE_LINE_DISABLE
-	andn	r0, r0, #CACHE_LINESIZE - 1
-	sub	r1, r1, r0
-	andn	r1, r1, #CACHE_LINESIZE - 1
-	add	r1, r1, #CACHE_LINESIZE
-
-	csub.a	r1, #MAX_AREA_SIZE
-	bsg	2f
-
-	@ r0 va2pa r10
-101:	dcacheline_flush	r0, r11, r12
-
-	add	r0, r0, #CACHE_LINESIZE
-	sub.a	r1, r1, #CACHE_LINESIZE
-	bns	101b
-	mov	pc, lr
-#endif
-2:	mov	ip, #0
-	movc	p0.c5, ip, #14			@ Dcache flush all
-	nop8
-
-	mov	pc, lr
-
diff --git a/arch/unicore32/mm/extable.c b/arch/unicore32/mm/extable.c
deleted file mode 100644
index e53352b41c4a..000000000000
--- a/arch/unicore32/mm/extable.c
+++ /dev/null
@@ -1,21 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/mm/extable.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/extable.h>
-#include <linux/uaccess.h>
-
-int fixup_exception(struct pt_regs *regs)
-{
-	const struct exception_table_entry *fixup;
-
-	fixup = search_exception_tables(instruction_pointer(regs));
-	if (fixup)
-		regs->UCreg_pc = fixup->fixup;
-
-	return fixup != NULL;
-}
diff --git a/arch/unicore32/mm/fault.c b/arch/unicore32/mm/fault.c
deleted file mode 100644
index 7654bddde133..000000000000
--- a/arch/unicore32/mm/fault.c
+++ /dev/null
@@ -1,481 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/mm/fault.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/extable.h>
-#include <linux/signal.h>
-#include <linux/mm.h>
-#include <linux/hardirq.h>
-#include <linux/init.h>
-#include <linux/kprobes.h>
-#include <linux/uaccess.h>
-#include <linux/page-flags.h>
-#include <linux/sched/signal.h>
-#include <linux/io.h>
-
-#include <asm/tlbflush.h>
-
-/*
- * Fault status register encodings.  We steal bit 31 for our own purposes.
- */
-#define FSR_LNX_PF		(1 << 31)
-
-static inline int fsr_fs(unsigned int fsr)
-{
-	/* xyabcde will be abcde+xy */
-	return (fsr & 31) + ((fsr & (3 << 5)) >> 5);
-}
-
-/*
- * This is useful to dump out the page tables associated with
- * 'addr' in mm 'mm'.
- */
-void show_pte(struct mm_struct *mm, unsigned long addr)
-{
-	pgd_t *pgd;
-
-	if (!mm)
-		mm = &init_mm;
-
-	printk(KERN_ALERT "pgd = %p\n", mm->pgd);
-	pgd = pgd_offset(mm, addr);
-	printk(KERN_ALERT "[%08lx] *pgd=%08lx", addr, pgd_val(*pgd));
-
-	do {
-		pmd_t *pmd;
-		pte_t *pte;
-
-		if (pgd_none(*pgd))
-			break;
-
-		if (pgd_bad(*pgd)) {
-			printk("(bad)");
-			break;
-		}
-
-		pmd = pmd_offset((pud_t *) pgd, addr);
-		if (PTRS_PER_PMD != 1)
-			printk(", *pmd=%08lx", pmd_val(*pmd));
-
-		if (pmd_none(*pmd))
-			break;
-
-		if (pmd_bad(*pmd)) {
-			printk("(bad)");
-			break;
-		}
-
-		/* We must not map this if we have highmem enabled */
-		if (PageHighMem(pfn_to_page(pmd_val(*pmd) >> PAGE_SHIFT)))
-			break;
-
-		pte = pte_offset_map(pmd, addr);
-		printk(", *pte=%08lx", pte_val(*pte));
-		pte_unmap(pte);
-	} while (0);
-
-	printk("\n");
-}
-
-/*
- * Oops.  The kernel tried to access some page that wasn't present.
- */
-static void __do_kernel_fault(struct mm_struct *mm, unsigned long addr,
-		unsigned int fsr, struct pt_regs *regs)
-{
-	/*
-	 * Are we prepared to handle this kernel fault?
-	 */
-	if (fixup_exception(regs))
-		return;
-
-	/*
-	 * No handler, we'll have to terminate things with extreme prejudice.
-	 */
-	bust_spinlocks(1);
-	printk(KERN_ALERT
-	       "Unable to handle kernel %s at virtual address %08lx\n",
-	       (addr < PAGE_SIZE) ? "NULL pointer dereference" :
-	       "paging request", addr);
-
-	show_pte(mm, addr);
-	die("Oops", regs, fsr);
-	bust_spinlocks(0);
-	do_exit(SIGKILL);
-}
-
-/*
- * Something tried to access memory that isn't in our memory map..
- * User mode accesses just cause a SIGSEGV
- */
-static void __do_user_fault(unsigned long addr, unsigned int fsr,
-			    unsigned int sig, int code,	struct pt_regs *regs)
-{
-	struct task_struct *tsk = current;
-
-	tsk->thread.address = addr;
-	tsk->thread.error_code = fsr;
-	tsk->thread.trap_no = 14;
-	force_sig_fault(sig, code, (void __user *)addr);
-}
-
-void do_bad_area(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
-{
-	struct task_struct *tsk = current;
-	struct mm_struct *mm = tsk->active_mm;
-
-	/*
-	 * If we are in kernel mode at this point, we
-	 * have no context to handle this fault with.
-	 */
-	if (user_mode(regs))
-		__do_user_fault(addr, fsr, SIGSEGV, SEGV_MAPERR, regs);
-	else
-		__do_kernel_fault(mm, addr, fsr, regs);
-}
-
-#define VM_FAULT_BADMAP		0x010000
-#define VM_FAULT_BADACCESS	0x020000
-
-/*
- * Check that the permissions on the VMA allow for the fault which occurred.
- * If we encountered a write fault, we must have write permission, otherwise
- * we allow any permission.
- */
-static inline bool access_error(unsigned int fsr, struct vm_area_struct *vma)
-{
-	unsigned int mask = VM_ACCESS_FLAGS;
-
-	if (!(fsr ^ 0x12))	/* write? */
-		mask = VM_WRITE;
-	if (fsr & FSR_LNX_PF)
-		mask = VM_EXEC;
-
-	return vma->vm_flags & mask ? false : true;
-}
-
-static vm_fault_t __do_pf(struct mm_struct *mm, unsigned long addr,
-		unsigned int fsr, unsigned int flags, struct task_struct *tsk)
-{
-	struct vm_area_struct *vma;
-	vm_fault_t fault;
-
-	vma = find_vma(mm, addr);
-	fault = VM_FAULT_BADMAP;
-	if (unlikely(!vma))
-		goto out;
-	if (unlikely(vma->vm_start > addr))
-		goto check_stack;
-
-	/*
-	 * Ok, we have a good vm_area for this
-	 * memory access, so we can handle it.
-	 */
-good_area:
-	if (access_error(fsr, vma)) {
-		fault = VM_FAULT_BADACCESS;
-		goto out;
-	}
-
-	/*
-	 * If for any reason at all we couldn't handle the fault, make
-	 * sure we exit gracefully rather than endlessly redo the fault.
-	 */
-	fault = handle_mm_fault(vma, addr & PAGE_MASK, flags);
-	return fault;
-
-check_stack:
-	if (vma->vm_flags & VM_GROWSDOWN && !expand_stack(vma, addr))
-		goto good_area;
-out:
-	return fault;
-}
-
-static int do_pf(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
-{
-	struct task_struct *tsk;
-	struct mm_struct *mm;
-	int sig, code;
-	vm_fault_t fault;
-	unsigned int flags = FAULT_FLAG_DEFAULT;
-
-	tsk = current;
-	mm = tsk->mm;
-
-	/*
-	 * If we're in an interrupt or have no user
-	 * context, we must not take the fault..
-	 */
-	if (faulthandler_disabled() || !mm)
-		goto no_context;
-
-	if (user_mode(regs))
-		flags |= FAULT_FLAG_USER;
-	if (!(fsr ^ 0x12))
-		flags |= FAULT_FLAG_WRITE;
-
-	/*
-	 * As per x86, we may deadlock here.  However, since the kernel only
-	 * validly references user space from well defined areas of the code,
-	 * we can bug out early if this is from code which shouldn't.
-	 */
-	if (!mmap_read_trylock(mm)) {
-		if (!user_mode(regs)
-		    && !search_exception_tables(regs->UCreg_pc))
-			goto no_context;
-retry:
-		mmap_read_lock(mm);
-	} else {
-		/*
-		 * The above down_read_trylock() might have succeeded in
-		 * which case, we'll have missed the might_sleep() from
-		 * down_read()
-		 */
-		might_sleep();
-#ifdef CONFIG_DEBUG_VM
-		if (!user_mode(regs) &&
-		    !search_exception_tables(regs->UCreg_pc))
-			goto no_context;
-#endif
-	}
-
-	fault = __do_pf(mm, addr, fsr, flags, tsk);
-
-	/* If we need to retry but a fatal signal is pending, handle the
-	 * signal first. We do not need to release the mmap_lock because
-	 * it would already be released in __lock_page_or_retry in
-	 * mm/filemap.c. */
-	if (fault_signal_pending(fault, regs))
-		return 0;
-
-	if (!(fault & VM_FAULT_ERROR) && (flags & FAULT_FLAG_ALLOW_RETRY)) {
-		if (fault & VM_FAULT_MAJOR)
-			tsk->maj_flt++;
-		else
-			tsk->min_flt++;
-		if (fault & VM_FAULT_RETRY) {
-			flags |= FAULT_FLAG_TRIED;
-			goto retry;
-		}
-	}
-
-	mmap_read_unlock(mm);
-
-	/*
-	 * Handle the "normal" case first - VM_FAULT_MAJOR
-	 */
-	if (likely(!(fault &
-	       (VM_FAULT_ERROR | VM_FAULT_BADMAP | VM_FAULT_BADACCESS))))
-		return 0;
-
-	/*
-	 * If we are in kernel mode at this point, we
-	 * have no context to handle this fault with.
-	 */
-	if (!user_mode(regs))
-		goto no_context;
-
-	if (fault & VM_FAULT_OOM) {
-		/*
-		 * We ran out of memory, call the OOM killer, and return to
-		 * userspace (which will retry the fault, or kill us if we
-		 * got oom-killed)
-		 */
-		pagefault_out_of_memory();
-		return 0;
-	}
-
-	if (fault & VM_FAULT_SIGBUS) {
-		/*
-		 * We had some memory, but were unable to
-		 * successfully fix up this page fault.
-		 */
-		sig = SIGBUS;
-		code = BUS_ADRERR;
-	} else {
-		/*
-		 * Something tried to access memory that
-		 * isn't in our memory map..
-		 */
-		sig = SIGSEGV;
-		code = fault == VM_FAULT_BADACCESS ? SEGV_ACCERR : SEGV_MAPERR;
-	}
-
-	__do_user_fault(addr, fsr, sig, code, regs);
-	return 0;
-
-no_context:
-	__do_kernel_fault(mm, addr, fsr, regs);
-	return 0;
-}
-
-/*
- * First Level Translation Fault Handler
- *
- * We enter here because the first level page table doesn't contain
- * a valid entry for the address.
- *
- * If the address is in kernel space (>= TASK_SIZE), then we are
- * probably faulting in the vmalloc() area.
- *
- * If the init_task's first level page tables contains the relevant
- * entry, we copy the it to this task.  If not, we send the process
- * a signal, fixup the exception, or oops the kernel.
- *
- * NOTE! We MUST NOT take any locks for this case. We may be in an
- * interrupt or a critical region, and should only copy the information
- * from the master page table, nothing more.
- */
-static int do_ifault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
-{
-	unsigned int index;
-	pgd_t *pgd, *pgd_k;
-	pmd_t *pmd, *pmd_k;
-
-	if (addr < TASK_SIZE)
-		return do_pf(addr, fsr, regs);
-
-	if (user_mode(regs))
-		goto bad_area;
-
-	index = pgd_index(addr);
-
-	pgd = cpu_get_pgd() + index;
-	pgd_k = init_mm.pgd + index;
-
-	if (pgd_none(*pgd_k))
-		goto bad_area;
-
-	pmd_k = pmd_offset((pud_t *) pgd_k, addr);
-	pmd = pmd_offset((pud_t *) pgd, addr);
-
-	if (pmd_none(*pmd_k))
-		goto bad_area;
-
-	set_pmd(pmd, *pmd_k);
-	flush_pmd_entry(pmd);
-	return 0;
-
-bad_area:
-	do_bad_area(addr, fsr, regs);
-	return 0;
-}
-
-/*
- * This abort handler always returns "fault".
- */
-static int do_bad(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
-{
-	return 1;
-}
-
-static int do_good(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
-{
-	unsigned int res1, res2;
-
-	printk("dabt exception but no error!\n");
-
-	__asm__ __volatile__(
-			"mff %0,f0\n"
-			"mff %1,f1\n"
-			: "=r"(res1), "=r"(res2)
-			:
-			: "memory");
-
-	printk(KERN_EMERG "r0 :%08x  r1 :%08x\n", res1, res2);
-	panic("shut up\n");
-	return 0;
-}
-
-static struct fsr_info {
-	int (*fn) (unsigned long addr, unsigned int fsr, struct pt_regs *regs);
-	int sig;
-	int code;
-	const char *name;
-} fsr_info[] = {
-	/*
-	 * The following are the standard Unicore-I and UniCore-II aborts.
-	 */
-	{ do_good,	SIGBUS,  0,		"no error"		},
-	{ do_bad,	SIGBUS,  BUS_ADRALN,	"alignment exception"	},
-	{ do_bad,	SIGBUS,  BUS_OBJERR,	"external exception"	},
-	{ do_bad,	SIGBUS,  0,		"burst operation"	},
-	{ do_bad,	SIGBUS,  0,		"unknown 00100"		},
-	{ do_ifault,	SIGSEGV, SEGV_MAPERR,	"2nd level pt non-exist"},
-	{ do_bad,	SIGBUS,  0,		"2nd lvl large pt non-exist" },
-	{ do_bad,	SIGBUS,  0,		"invalid pte"		},
-	{ do_pf,	SIGSEGV, SEGV_MAPERR,	"page miss"		},
-	{ do_bad,	SIGBUS,  0,		"middle page miss"	},
-	{ do_bad,	SIGBUS,	 0,		"large page miss"	},
-	{ do_pf,	SIGSEGV, SEGV_MAPERR,	"super page (section) miss" },
-	{ do_bad,	SIGBUS,  0,		"unknown 01100"		},
-	{ do_bad,	SIGBUS,  0,		"unknown 01101"		},
-	{ do_bad,	SIGBUS,  0,		"unknown 01110"		},
-	{ do_bad,	SIGBUS,  0,		"unknown 01111"		},
-	{ do_bad,	SIGBUS,  0,		"addr: up 3G or IO"	},
-	{ do_pf,	SIGSEGV, SEGV_ACCERR,	"read unreadable addr"	},
-	{ do_pf,	SIGSEGV, SEGV_ACCERR,	"write unwriteable addr"},
-	{ do_pf,	SIGSEGV, SEGV_ACCERR,	"exec unexecutable addr"},
-	{ do_bad,	SIGBUS,  0,		"unknown 10100"		},
-	{ do_bad,	SIGBUS,  0,		"unknown 10101"		},
-	{ do_bad,	SIGBUS,  0,		"unknown 10110"		},
-	{ do_bad,	SIGBUS,  0,		"unknown 10111"		},
-	{ do_bad,	SIGBUS,  0,		"unknown 11000"		},
-	{ do_bad,	SIGBUS,  0,		"unknown 11001"		},
-	{ do_bad,	SIGBUS,  0,		"unknown 11010"		},
-	{ do_bad,	SIGBUS,  0,		"unknown 11011"		},
-	{ do_bad,	SIGBUS,  0,		"unknown 11100"		},
-	{ do_bad,	SIGBUS,  0,		"unknown 11101"		},
-	{ do_bad,	SIGBUS,  0,		"unknown 11110"		},
-	{ do_bad,	SIGBUS,  0,		"unknown 11111"		}
-};
-
-void __init hook_fault_code(int nr,
-		int (*fn) (unsigned long, unsigned int, struct pt_regs *),
-		int sig, int code, const char *name)
-{
-	if (nr < 0 || nr >= ARRAY_SIZE(fsr_info))
-		BUG();
-
-	fsr_info[nr].fn   = fn;
-	fsr_info[nr].sig  = sig;
-	fsr_info[nr].code = code;
-	fsr_info[nr].name = name;
-}
-
-/*
- * Dispatch a data abort to the relevant handler.
- */
-asmlinkage void do_DataAbort(unsigned long addr, unsigned int fsr,
-			struct pt_regs *regs)
-{
-	const struct fsr_info *inf = fsr_info + fsr_fs(fsr);
-
-	if (!inf->fn(addr, fsr & ~FSR_LNX_PF, regs))
-		return;
-
-	printk(KERN_ALERT "Unhandled fault: %s (0x%03x) at 0x%08lx\n",
-	       inf->name, fsr, addr);
-
-	uc32_notify_die("", regs, inf->sig, inf->code, (void __user *)addr,
-			fsr, 0);
-}
-
-asmlinkage void do_PrefetchAbort(unsigned long addr,
-			unsigned int ifsr, struct pt_regs *regs)
-{
-	const struct fsr_info *inf = fsr_info + fsr_fs(ifsr);
-
-	if (!inf->fn(addr, ifsr | FSR_LNX_PF, regs))
-		return;
-
-	printk(KERN_ALERT "Unhandled prefetch abort: %s (0x%03x) at 0x%08lx\n",
-	       inf->name, ifsr, addr);
-
-	uc32_notify_die("", regs, inf->sig, inf->code, (void __user *)addr,
-			ifsr, 0);
-}
diff --git a/arch/unicore32/mm/flush.c b/arch/unicore32/mm/flush.c
deleted file mode 100644
index 65954f8d89a2..000000000000
--- a/arch/unicore32/mm/flush.c
+++ /dev/null
@@ -1,94 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/mm/flush.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/pagemap.h>
-
-#include <asm/cacheflush.h>
-#include <asm/tlbflush.h>
-
-void flush_cache_mm(struct mm_struct *mm)
-{
-}
-
-void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
-		unsigned long end)
-{
-	if (vma->vm_flags & VM_EXEC)
-		__flush_icache_all();
-}
-
-void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr,
-		unsigned long pfn)
-{
-}
-
-static void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
-			 unsigned long uaddr, void *kaddr, unsigned long len)
-{
-	/* VIPT non-aliasing D-cache */
-	if (vma->vm_flags & VM_EXEC) {
-		unsigned long addr = (unsigned long)kaddr;
-
-		__cpuc_coherent_kern_range(addr, addr + len);
-	}
-}
-
-/*
- * Copy user data from/to a page which is mapped into a different
- * processes address space.  Really, we want to allow our "user
- * space" model to handle this.
- *
- * Note that this code needs to run on the current CPU.
- */
-void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
-		       unsigned long uaddr, void *dst, const void *src,
-		       unsigned long len)
-{
-	memcpy(dst, src, len);
-	flush_ptrace_access(vma, page, uaddr, dst, len);
-}
-
-void __flush_dcache_page(struct address_space *mapping, struct page *page)
-{
-	/*
-	 * Writeback any data associated with the kernel mapping of this
-	 * page.  This ensures that data in the physical page is mutually
-	 * coherent with the kernels mapping.
-	 */
-	__cpuc_flush_kern_dcache_area(page_address(page), PAGE_SIZE);
-}
-
-/*
- * Ensure cache coherency between kernel mapping and userspace mapping
- * of this page.
- */
-void flush_dcache_page(struct page *page)
-{
-	struct address_space *mapping;
-
-	/*
-	 * The zero page is never written to, so never has any dirty
-	 * cache lines, and therefore never needs to be flushed.
-	 */
-	if (page == ZERO_PAGE(0))
-		return;
-
-	mapping = page_mapping_file(page);
-
-	if (mapping && !mapping_mapped(mapping))
-		clear_bit(PG_dcache_clean, &page->flags);
-	else {
-		__flush_dcache_page(mapping, page);
-		if (mapping)
-			__flush_icache_all();
-		set_bit(PG_dcache_clean, &page->flags);
-	}
-}
-EXPORT_SYMBOL(flush_dcache_page);
diff --git a/arch/unicore32/mm/init.c b/arch/unicore32/mm/init.c
deleted file mode 100644
index 52425d383cea..000000000000
--- a/arch/unicore32/mm/init.c
+++ /dev/null
@@ -1,261 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/unicore32/mm/init.c
- *
- *  Copyright (C) 2010 GUAN Xue-tao
- */
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/swap.h>
-#include <linux/init.h>
-#include <linux/memblock.h>
-#include <linux/mman.h>
-#include <linux/nodemask.h>
-#include <linux/initrd.h>
-#include <linux/highmem.h>
-#include <linux/gfp.h>
-#include <linux/sort.h>
-#include <linux/dma-mapping.h>
-#include <linux/export.h>
-
-#include <asm/sections.h>
-#include <asm/setup.h>
-#include <linux/sizes.h>
-#include <asm/tlb.h>
-#include <asm/memblock.h>
-#include <mach/map.h>
-
-#include "mm.h"
-
-/*
- * This keeps memory configuration data used by a couple memory
- * initialization functions, as well as show_mem() for the skipping
- * of holes in the memory map.  It is populated by uc32_add_memory().
- */
-struct meminfo meminfo;
-
-static void __init find_limits(unsigned long *min, unsigned long *max_low,
-	unsigned long *max_high)
-{
-	struct meminfo *mi = &meminfo;
-	int i;
-
-	*min = -1UL;
-	*max_low = *max_high = 0;
-
-	for_each_bank(i, mi) {
-		struct membank *bank = &mi->bank[i];
-		unsigned long start, end;
-
-		start = bank_pfn_start(bank);
-		end = bank_pfn_end(bank);
-
-		if (*min > start)
-			*min = start;
-		if (*max_high < end)
-			*max_high = end;
-		if (bank->highmem)
-			continue;
-		if (*max_low < end)
-			*max_low = end;
-	}
-}
-
-static void __init uc32_bootmem_free(unsigned long max_low)
-{
-	unsigned long max_zone_pfn[MAX_NR_ZONES] = { 0 };
-
-	max_zone_pfn[ZONE_DMA] = max_low;
-	max_zone_pfn[ZONE_NORMAL] = max_low;
-
-	/*
-	 * Adjust the sizes according to any special requirements for
-	 * this machine type.
-	 * This might lower ZONE_DMA limit.
-	 */
-	arch_adjust_zones(max_zone_pfn);
-
-	free_area_init(max_zone_pfn);
-}
-
-int pfn_valid(unsigned long pfn)
-{
-	return memblock_is_memory(pfn << PAGE_SHIFT);
-}
-EXPORT_SYMBOL(pfn_valid);
-
-static void uc32_memory_present(void)
-{
-}
-
-static int __init meminfo_cmp(const void *_a, const void *_b)
-{
-	const struct membank *a = _a, *b = _b;
-	long cmp = bank_pfn_start(a) - bank_pfn_start(b);
-	return cmp < 0 ? -1 : cmp > 0 ? 1 : 0;
-}
-
-void __init uc32_memblock_init(struct meminfo *mi)
-{
-	int i;
-
-	sort(&meminfo.bank, meminfo.nr_banks, sizeof(meminfo.bank[0]),
-		meminfo_cmp, NULL);
-
-	for (i = 0; i < mi->nr_banks; i++)
-		memblock_add(mi->bank[i].start, mi->bank[i].size);
-
-	/* Register the kernel text, kernel data and initrd with memblock. */
-	memblock_reserve(__pa(_text), _end - _text);
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (!phys_initrd_size) {
-		phys_initrd_start = 0x01000000;
-		phys_initrd_size = SZ_8M;
-	}
-
-	if (phys_initrd_size) {
-		memblock_reserve(phys_initrd_start, phys_initrd_size);
-
-		/* Now convert initrd to virtual addresses */
-		initrd_start = __phys_to_virt(phys_initrd_start);
-		initrd_end = initrd_start + phys_initrd_size;
-	}
-#endif
-
-	uc32_mm_memblock_reserve();
-
-	memblock_allow_resize();
-	memblock_dump_all();
-}
-
-void __init bootmem_init(void)
-{
-	unsigned long min, max_low, max_high;
-
-	max_low = max_high = 0;
-
-	find_limits(&min, &max_low, &max_high);
-
-	node_set_online(0);
-
-	/*
-	 * Sparsemem tries to allocate bootmem in memory_present(),
-	 * so must be done after the fixed reservations
-	 */
-	uc32_memory_present();
-
-	/*
-	 * sparse_init() needs the bootmem allocator up and running.
-	 */
-	sparse_init();
-
-	/*
-	 * Now free the memory - free_area_init needs
-	 * the sparse mem_map arrays initialized by sparse_init()
-	 * for memmap_init_zone(), otherwise all PFNs are invalid.
-	 */
-	uc32_bootmem_free(max_low);
-
-	high_memory = __va((max_low << PAGE_SHIFT) - 1) + 1;
-
-	/*
-	 * This doesn't seem to be used by the Linux memory manager any
-	 * more, but is used by ll_rw_block.  If we can get rid of it, we
-	 * also get rid of some of the stuff above as well.
-	 *
-	 * Note: max_low_pfn and max_pfn reflect the number of _pages_ in
-	 * the system, not the maximum PFN.
-	 */
-	max_low_pfn = max_low - PHYS_PFN_OFFSET;
-	max_pfn = max_high - PHYS_PFN_OFFSET;
-}
-
-static inline void
-free_memmap(unsigned long start_pfn, unsigned long end_pfn)
-{
-	struct page *start_pg, *end_pg;
-	unsigned long pg, pgend;
-
-	/*
-	 * Convert start_pfn/end_pfn to a struct page pointer.
-	 */
-	start_pg = pfn_to_page(start_pfn - 1) + 1;
-	end_pg = pfn_to_page(end_pfn);
-
-	/*
-	 * Convert to physical addresses, and
-	 * round start upwards and end downwards.
-	 */
-	pg = PAGE_ALIGN(__pa(start_pg));
-	pgend = __pa(end_pg) & PAGE_MASK;
-
-	/*
-	 * If there are free pages between these,
-	 * free the section of the memmap array.
-	 */
-	if (pg < pgend)
-		memblock_free(pg, pgend - pg);
-}
-
-/*
- * The mem_map array can get very big.  Free the unused area of the memory map.
- */
-static void __init free_unused_memmap(struct meminfo *mi)
-{
-	unsigned long bank_start, prev_bank_end = 0;
-	unsigned int i;
-
-	/*
-	 * This relies on each bank being in address order.
-	 * The banks are sorted previously in bootmem_init().
-	 */
-	for_each_bank(i, mi) {
-		struct membank *bank = &mi->bank[i];
-
-		bank_start = bank_pfn_start(bank);
-
-		/*
-		 * If we had a previous bank, and there is a space
-		 * between the current bank and the previous, free it.
-		 */
-		if (prev_bank_end && prev_bank_end < bank_start)
-			free_memmap(prev_bank_end, bank_start);
-
-		/*
-		 * Align up here since the VM subsystem insists that the
-		 * memmap entries are valid from the bank end aligned to
-		 * MAX_ORDER_NR_PAGES.
-		 */
-		prev_bank_end = ALIGN(bank_pfn_end(bank), MAX_ORDER_NR_PAGES);
-	}
-}
-
-/*
- * mem_init() marks the free areas in the mem_map and tells us how much
- * memory is free.  This is done after various parts of the system have
- * claimed their memory after the kernel image.
- */
-void __init mem_init(void)
-{
-	max_mapnr   = pfn_to_page(max_pfn + PHYS_PFN_OFFSET) - mem_map;
-
-	free_unused_memmap(&meminfo);
-
-	/* this will put all unused low memory onto the freelists */
-	memblock_free_all();
-
-	mem_init_print_info(NULL);
-
-	BUILD_BUG_ON(TASK_SIZE				> MODULES_VADDR);
-	BUG_ON(TASK_SIZE				> MODULES_VADDR);
-
-	if (PAGE_SIZE >= 16384 && get_num_physpages() <= 128) {
-		/*
-		 * On a machine this small we won't get
-		 * anywhere without overcommit, so turn
-		 * it on by default.
-		 */
-		sysctl_overcommit_memory = OVERCOMMIT_ALWAYS;
-	}
-}
diff --git a/arch/unicore32/mm/ioremap.c b/arch/unicore32/mm/ioremap.c
deleted file mode 100644
index 46a64bd6156a..000000000000
--- a/arch/unicore32/mm/ioremap.c
+++ /dev/null
@@ -1,242 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/mm/ioremap.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- *
- * Re-map IO memory to kernel address space so that we can access it.
- *
- * This allows a driver to remap an arbitrary region of bus memory into
- * virtual space.  One should *only* use readl, writel, memcpy_toio and
- * so on with such remapped areas.
- *
- * Because UniCore only has a 32-bit address space we can't address the
- * whole of the (physical) PCI space at once.  PCI huge-mode addressing
- * allows us to circumvent this restriction by splitting PCI space into
- * two 2GB chunks and mapping only one at a time into processor memory.
- * We use MMU protection domains to trap any attempt to access the bank
- * that is not currently mapped.  (This isn't fully implemented yet.)
- */
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/mm.h>
-#include <linux/vmalloc.h>
-#include <linux/io.h>
-
-#include <asm/cputype.h>
-#include <asm/cacheflush.h>
-#include <asm/mmu_context.h>
-#include <asm/pgalloc.h>
-#include <asm/tlbflush.h>
-#include <linux/sizes.h>
-
-#include <mach/map.h>
-#include "mm.h"
-
-/*
- * Used by ioremap() and iounmap() code to mark (super)section-mapped
- * I/O regions in vm_struct->flags field.
- */
-#define VM_UNICORE_SECTION_MAPPING	0x80000000
-
-int ioremap_page(unsigned long virt, unsigned long phys,
-		 const struct mem_type *mtype)
-{
-	return ioremap_page_range(virt, virt + PAGE_SIZE, phys,
-				  __pgprot(mtype->prot_pte));
-}
-EXPORT_SYMBOL(ioremap_page);
-
-/*
- * Section support is unsafe on SMP - If you iounmap and ioremap a region,
- * the other CPUs will not see this change until their next context switch.
- * Meanwhile, (eg) if an interrupt comes in on one of those other CPUs
- * which requires the new ioremap'd region to be referenced, the CPU will
- * reference the _old_ region.
- *
- * Note that get_vm_area_caller() allocates a guard 4K page, so we need to
- * mask the size back to 4MB aligned or we will overflow in the loop below.
- */
-static void unmap_area_sections(unsigned long virt, unsigned long size)
-{
-	unsigned long addr = virt, end = virt + (size & ~(SZ_4M - 1));
-	pgd_t *pgd;
-
-	flush_cache_vunmap(addr, end);
-	pgd = pgd_offset_k(addr);
-	do {
-		pmd_t pmd, *pmdp = pmd_offset((pud_t *)pgd, addr);
-
-		pmd = *pmdp;
-		if (!pmd_none(pmd)) {
-			/*
-			 * Clear the PMD from the page table, and
-			 * increment the kvm sequence so others
-			 * notice this change.
-			 *
-			 * Note: this is still racy on SMP machines.
-			 */
-			pmd_clear(pmdp);
-
-			/*
-			 * Free the page table, if there was one.
-			 */
-			if ((pmd_val(pmd) & PMD_TYPE_MASK) == PMD_TYPE_TABLE)
-				pte_free_kernel(&init_mm, pmd_page_vaddr(pmd));
-		}
-
-		addr += PGDIR_SIZE;
-		pgd++;
-	} while (addr < end);
-
-	flush_tlb_kernel_range(virt, end);
-}
-
-static int
-remap_area_sections(unsigned long virt, unsigned long pfn,
-		    size_t size, const struct mem_type *type)
-{
-	unsigned long addr = virt, end = virt + size;
-	pgd_t *pgd;
-
-	/*
-	 * Remove and free any PTE-based mapping, and
-	 * sync the current kernel mapping.
-	 */
-	unmap_area_sections(virt, size);
-
-	pgd = pgd_offset_k(addr);
-	do {
-		pmd_t *pmd = pmd_offset((pud_t *)pgd, addr);
-
-		set_pmd(pmd, __pmd(__pfn_to_phys(pfn) | type->prot_sect));
-		pfn += SZ_4M >> PAGE_SHIFT;
-		flush_pmd_entry(pmd);
-
-		addr += PGDIR_SIZE;
-		pgd++;
-	} while (addr < end);
-
-	return 0;
-}
-
-void __iomem *__uc32_ioremap_pfn_caller(unsigned long pfn,
-	unsigned long offset, size_t size, unsigned int mtype, void *caller)
-{
-	const struct mem_type *type;
-	int err;
-	unsigned long addr;
-	struct vm_struct *area;
-
-	/*
-	 * High mappings must be section aligned
-	 */
-	if (pfn >= 0x100000 && (__pfn_to_phys(pfn) & ~SECTION_MASK))
-		return NULL;
-
-	/*
-	 * Don't allow RAM to be mapped
-	 */
-	if (pfn_valid(pfn)) {
-		WARN(1, "BUG: Your driver calls ioremap() on\n"
-			"system memory.  This leads to architecturally\n"
-			"unpredictable behaviour, and ioremap() will fail in\n"
-			"the next kernel release. Please fix your driver.\n");
-		return NULL;
-	}
-
-	type = get_mem_type(mtype);
-	if (!type)
-		return NULL;
-
-	/*
-	 * Page align the mapping size, taking account of any offset.
-	 */
-	size = PAGE_ALIGN(offset + size);
-
-	area = get_vm_area_caller(size, VM_IOREMAP, caller);
-	if (!area)
-		return NULL;
-	addr = (unsigned long)area->addr;
-
-	if (!((__pfn_to_phys(pfn) | size | addr) & ~PMD_MASK)) {
-		area->flags |= VM_UNICORE_SECTION_MAPPING;
-		err = remap_area_sections(addr, pfn, size, type);
-	} else
-		err = ioremap_page_range(addr, addr + size, __pfn_to_phys(pfn),
-					 __pgprot(type->prot_pte));
-
-	if (err) {
-		vunmap((void *)addr);
-		return NULL;
-	}
-
-	flush_cache_vmap(addr, addr + size);
-	return (void __iomem *) (offset + addr);
-}
-
-void __iomem *__uc32_ioremap_caller(unsigned long phys_addr, size_t size,
-	unsigned int mtype, void *caller)
-{
-	unsigned long last_addr;
-	unsigned long offset = phys_addr & ~PAGE_MASK;
-	unsigned long pfn = __phys_to_pfn(phys_addr);
-
-	/*
-	 * Don't allow wraparound or zero size
-	 */
-	last_addr = phys_addr + size - 1;
-	if (!size || last_addr < phys_addr)
-		return NULL;
-
-	return __uc32_ioremap_pfn_caller(pfn, offset, size, mtype, caller);
-}
-
-/*
- * Remap an arbitrary physical address space into the kernel virtual
- * address space. Needed when the kernel wants to access high addresses
- * directly.
- *
- * NOTE! We need to allow non-page-aligned mappings too: we will obviously
- * have to convert them into an offset in a page-aligned mapping, but the
- * caller shouldn't need to know that small detail.
- */
-void __iomem *
-__uc32_ioremap_pfn(unsigned long pfn, unsigned long offset, size_t size,
-		  unsigned int mtype)
-{
-	return __uc32_ioremap_pfn_caller(pfn, offset, size, mtype,
-			__builtin_return_address(0));
-}
-EXPORT_SYMBOL(__uc32_ioremap_pfn);
-
-void __iomem *
-__uc32_ioremap(unsigned long phys_addr, size_t size)
-{
-	return __uc32_ioremap_caller(phys_addr, size, MT_DEVICE,
-			__builtin_return_address(0));
-}
-EXPORT_SYMBOL(__uc32_ioremap);
-
-void __uc32_iounmap(volatile void __iomem *io_addr)
-{
-	void *addr = (void *)(PAGE_MASK & (unsigned long)io_addr);
-	struct vm_struct *vm;
-
-	/*
-	 * If this is a section based mapping we need to handle it
-	 * specially as the VM subsystem does not know how to handle
-	 * such a beast. We need the lock here b/c we need to clear
-	 * all the mappings before the area can be reclaimed
-	 * by someone else.
-	 */
-	vm = find_vm_area(addr);
-	if (vm && (vm->flags & VM_IOREMAP) &&
-		(vm->flags & VM_UNICORE_SECTION_MAPPING))
-		unmap_area_sections((unsigned long)vm->addr, vm->size);
-
-	vunmap(addr);
-}
-EXPORT_SYMBOL(__uc32_iounmap);
diff --git a/arch/unicore32/mm/mm.h b/arch/unicore32/mm/mm.h
deleted file mode 100644
index f157f5d249ab..000000000000
--- a/arch/unicore32/mm/mm.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/mm/mm.h
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <asm/hwdef-copro.h>
-
-/* the upper-most page table pointer */
-extern pmd_t *top_pmd;
-extern int sysctl_overcommit_memory;
-
-#define TOP_PTE(x)	pte_offset_kernel(top_pmd, x)
-
-struct mem_type {
-	unsigned int prot_pte;
-	unsigned int prot_l1;
-	unsigned int prot_sect;
-};
-
-const struct mem_type *get_mem_type(unsigned int type);
-
-extern void __flush_dcache_page(struct address_space *, struct page *);
-extern void hook_fault_code(int nr, int (*fn)
-		(unsigned long, unsigned int, struct pt_regs *),
-		int sig, int code, const char *name);
-
-void __init bootmem_init(void);
-void uc32_mm_memblock_reserve(void);
diff --git a/arch/unicore32/mm/mmu.c b/arch/unicore32/mm/mmu.c
deleted file mode 100644
index 183d5b056814..000000000000
--- a/arch/unicore32/mm/mmu.c
+++ /dev/null
@@ -1,513 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/mm/mmu.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/mman.h>
-#include <linux/nodemask.h>
-#include <linux/memblock.h>
-#include <linux/fs.h>
-#include <linux/io.h>
-
-#include <asm/cputype.h>
-#include <asm/sections.h>
-#include <asm/setup.h>
-#include <linux/sizes.h>
-#include <asm/tlb.h>
-#include <asm/memblock.h>
-
-#include <mach/map.h>
-
-#include "mm.h"
-
-/*
- * empty_zero_page is a special page that is used for
- * zero-initialized data and COW.
- */
-struct page *empty_zero_page;
-EXPORT_SYMBOL(empty_zero_page);
-
-/*
- * The pmd table for the upper-most set of pages.
- */
-pmd_t *top_pmd;
-
-pgprot_t pgprot_user;
-EXPORT_SYMBOL(pgprot_user);
-
-pgprot_t pgprot_kernel;
-EXPORT_SYMBOL(pgprot_kernel);
-
-static int __init noalign_setup(char *__unused)
-{
-	cr_alignment &= ~CR_A;
-	cr_no_alignment &= ~CR_A;
-	set_cr(cr_alignment);
-	return 1;
-}
-__setup("noalign", noalign_setup);
-
-void adjust_cr(unsigned long mask, unsigned long set)
-{
-	unsigned long flags;
-
-	mask &= ~CR_A;
-
-	set &= mask;
-
-	local_irq_save(flags);
-
-	cr_no_alignment = (cr_no_alignment & ~mask) | set;
-	cr_alignment = (cr_alignment & ~mask) | set;
-
-	set_cr((get_cr() & ~mask) | set);
-
-	local_irq_restore(flags);
-}
-
-struct map_desc {
-	unsigned long virtual;
-	unsigned long pfn;
-	unsigned long length;
-	unsigned int type;
-};
-
-#define PROT_PTE_DEVICE		(PTE_PRESENT | PTE_YOUNG |	\
-				PTE_DIRTY | PTE_READ | PTE_WRITE)
-#define PROT_SECT_DEVICE	(PMD_TYPE_SECT | PMD_PRESENT |	\
-				PMD_SECT_READ | PMD_SECT_WRITE)
-
-static struct mem_type mem_types[] = {
-	[MT_DEVICE] = {		  /* Strongly ordered */
-		.prot_pte	= PROT_PTE_DEVICE,
-		.prot_l1	= PMD_TYPE_TABLE | PMD_PRESENT,
-		.prot_sect	= PROT_SECT_DEVICE,
-	},
-	/*
-	 * MT_KUSER: pte for vecpage -- cacheable,
-	 *       and sect for unigfx mmap -- noncacheable
-	 */
-	[MT_KUSER] = {
-		.prot_pte  = PTE_PRESENT | PTE_YOUNG | PTE_DIRTY |
-				PTE_CACHEABLE | PTE_READ | PTE_EXEC,
-		.prot_l1   = PMD_TYPE_TABLE | PMD_PRESENT,
-		.prot_sect = PROT_SECT_DEVICE,
-	},
-	[MT_HIGH_VECTORS] = {
-		.prot_pte  = PTE_PRESENT | PTE_YOUNG | PTE_DIRTY |
-				PTE_CACHEABLE | PTE_READ | PTE_WRITE |
-				PTE_EXEC,
-		.prot_l1   = PMD_TYPE_TABLE | PMD_PRESENT,
-	},
-	[MT_MEMORY] = {
-		.prot_pte  = PTE_PRESENT | PTE_YOUNG | PTE_DIRTY |
-				PTE_WRITE | PTE_EXEC,
-		.prot_l1   = PMD_TYPE_TABLE | PMD_PRESENT,
-		.prot_sect = PMD_TYPE_SECT | PMD_PRESENT | PMD_SECT_CACHEABLE |
-				PMD_SECT_READ | PMD_SECT_WRITE | PMD_SECT_EXEC,
-	},
-	[MT_ROM] = {
-		.prot_sect = PMD_TYPE_SECT | PMD_PRESENT | PMD_SECT_CACHEABLE |
-				PMD_SECT_READ,
-	},
-};
-
-const struct mem_type *get_mem_type(unsigned int type)
-{
-	return type < ARRAY_SIZE(mem_types) ? &mem_types[type] : NULL;
-}
-EXPORT_SYMBOL(get_mem_type);
-
-/*
- * Adjust the PMD section entries according to the CPU in use.
- */
-static void __init build_mem_type_table(void)
-{
-	pgprot_user   = __pgprot(PTE_PRESENT | PTE_YOUNG | PTE_CACHEABLE);
-	pgprot_kernel = __pgprot(PTE_PRESENT | PTE_YOUNG |
-				 PTE_DIRTY | PTE_READ | PTE_WRITE |
-				 PTE_EXEC | PTE_CACHEABLE);
-}
-
-#define vectors_base()	(vectors_high() ? 0xffff0000 : 0)
-
-static pte_t * __init early_pte_alloc(pmd_t *pmd, unsigned long addr,
-		unsigned long prot)
-{
-	if (pmd_none(*pmd)) {
-		size_t size = PTRS_PER_PTE * sizeof(pte_t);
-		pte_t *pte = memblock_alloc(size, size);
-
-		if (!pte)
-			panic("%s: Failed to allocate %zu bytes align=%zx\n",
-			      __func__, size, size);
-
-		__pmd_populate(pmd, __pa(pte) | prot);
-	}
-	BUG_ON(pmd_bad(*pmd));
-	return pte_offset_kernel(pmd, addr);
-}
-
-static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr,
-				  unsigned long end, unsigned long pfn,
-				  const struct mem_type *type)
-{
-	pte_t *pte = early_pte_alloc(pmd, addr, type->prot_l1);
-	do {
-		set_pte(pte, pfn_pte(pfn, __pgprot(type->prot_pte)));
-		pfn++;
-	} while (pte++, addr += PAGE_SIZE, addr != end);
-}
-
-static void __init alloc_init_section(pgd_t *pgd, unsigned long addr,
-				      unsigned long end, unsigned long phys,
-				      const struct mem_type *type)
-{
-	pmd_t *pmd = pmd_offset((pud_t *)pgd, addr);
-
-	/*
-	 * Try a section mapping - end, addr and phys must all be aligned
-	 * to a section boundary.
-	 */
-	if (((addr | end | phys) & ~SECTION_MASK) == 0) {
-		pmd_t *p = pmd;
-
-		do {
-			set_pmd(pmd, __pmd(phys | type->prot_sect));
-			phys += SECTION_SIZE;
-		} while (pmd++, addr += SECTION_SIZE, addr != end);
-
-		flush_pmd_entry(p);
-	} else {
-		/*
-		 * No need to loop; pte's aren't interested in the
-		 * individual L1 entries.
-		 */
-		alloc_init_pte(pmd, addr, end, __phys_to_pfn(phys), type);
-	}
-}
-
-/*
- * Create the page directory entries and any necessary
- * page tables for the mapping specified by `md'.  We
- * are able to cope here with varying sizes and address
- * offsets, and we take full advantage of sections.
- */
-static void __init create_mapping(struct map_desc *md)
-{
-	unsigned long phys, addr, length, end;
-	const struct mem_type *type;
-	pgd_t *pgd;
-
-	if (md->virtual != vectors_base() && md->virtual < TASK_SIZE) {
-		printk(KERN_WARNING "BUG: not creating mapping for "
-		       "0x%08llx at 0x%08lx in user region\n",
-		       __pfn_to_phys((u64)md->pfn), md->virtual);
-		return;
-	}
-
-	if ((md->type == MT_DEVICE || md->type == MT_ROM) &&
-	    md->virtual >= PAGE_OFFSET && md->virtual < VMALLOC_END) {
-		printk(KERN_WARNING "BUG: mapping for 0x%08llx at 0x%08lx "
-		       "overlaps vmalloc space\n",
-		       __pfn_to_phys((u64)md->pfn), md->virtual);
-	}
-
-	type = &mem_types[md->type];
-
-	addr = md->virtual & PAGE_MASK;
-	phys = (unsigned long)__pfn_to_phys(md->pfn);
-	length = PAGE_ALIGN(md->length + (md->virtual & ~PAGE_MASK));
-
-	if (type->prot_l1 == 0 && ((addr | phys | length) & ~SECTION_MASK)) {
-		printk(KERN_WARNING "BUG: map for 0x%08lx at 0x%08lx can not "
-		       "be mapped using pages, ignoring.\n",
-		       __pfn_to_phys(md->pfn), addr);
-		return;
-	}
-
-	pgd = pgd_offset_k(addr);
-	end = addr + length;
-	do {
-		unsigned long next = pgd_addr_end(addr, end);
-
-		alloc_init_section(pgd, addr, next, phys, type);
-
-		phys += next - addr;
-		addr = next;
-	} while (pgd++, addr != end);
-}
-
-static void * __initdata vmalloc_min = (void *)(VMALLOC_END - SZ_128M);
-
-/*
- * vmalloc=size forces the vmalloc area to be exactly 'size'
- * bytes. This can be used to increase (or decrease) the vmalloc
- * area - the default is 128m.
- */
-static int __init early_vmalloc(char *arg)
-{
-	unsigned long vmalloc_reserve = memparse(arg, NULL);
-
-	if (vmalloc_reserve < SZ_16M) {
-		vmalloc_reserve = SZ_16M;
-		printk(KERN_WARNING
-			"vmalloc area too small, limiting to %luMB\n",
-			vmalloc_reserve >> 20);
-	}
-
-	if (vmalloc_reserve > VMALLOC_END - (PAGE_OFFSET + SZ_32M)) {
-		vmalloc_reserve = VMALLOC_END - (PAGE_OFFSET + SZ_32M);
-		printk(KERN_WARNING
-			"vmalloc area is too big, limiting to %luMB\n",
-			vmalloc_reserve >> 20);
-	}
-
-	vmalloc_min = (void *)(VMALLOC_END - vmalloc_reserve);
-	return 0;
-}
-early_param("vmalloc", early_vmalloc);
-
-static phys_addr_t lowmem_limit __initdata = SZ_1G;
-
-static void __init sanity_check_meminfo(void)
-{
-	int i, j;
-
-	lowmem_limit = __pa(vmalloc_min - 1) + 1;
-	memblock_set_current_limit(lowmem_limit);
-
-	for (i = 0, j = 0; i < meminfo.nr_banks; i++) {
-		struct membank *bank = &meminfo.bank[j];
-		*bank = meminfo.bank[i];
-		j++;
-	}
-	meminfo.nr_banks = j;
-}
-
-static inline void prepare_page_table(void)
-{
-	unsigned long addr;
-	phys_addr_t end;
-
-	/*
-	 * Clear out all the mappings below the kernel image.
-	 */
-	for (addr = 0; addr < MODULES_VADDR; addr += PGDIR_SIZE)
-		pmd_clear(pmd_off_k(addr));
-
-	for ( ; addr < PAGE_OFFSET; addr += PGDIR_SIZE)
-		pmd_clear(pmd_off_k(addr));
-
-	/*
-	 * Find the end of the first block of lowmem.
-	 */
-	end = memblock.memory.regions[0].base + memblock.memory.regions[0].size;
-	if (end >= lowmem_limit)
-		end = lowmem_limit;
-
-	/*
-	 * Clear out all the kernel space mappings, except for the first
-	 * memory bank, up to the end of the vmalloc region.
-	 */
-	for (addr = __phys_to_virt(end);
-	     addr < VMALLOC_END; addr += PGDIR_SIZE)
-		pmd_clear(pmd_off_k(addr));
-}
-
-/*
- * Reserve the special regions of memory
- */
-void __init uc32_mm_memblock_reserve(void)
-{
-	/*
-	 * Reserve the page tables.  These are already in use,
-	 * and can only be in node 0.
-	 */
-	memblock_reserve(__pa(swapper_pg_dir), PTRS_PER_PGD * sizeof(pgd_t));
-}
-
-/*
- * Set up device the mappings.  Since we clear out the page tables for all
- * mappings above VMALLOC_END, we will remove any debug device mappings.
- * This means you have to be careful how you debug this function, or any
- * called function.  This means you can't use any function or debugging
- * method which may touch any device, otherwise the kernel _will_ crash.
- */
-static void __init devicemaps_init(void)
-{
-	struct map_desc map;
-	unsigned long addr;
-	void *vectors;
-
-	/*
-	 * Allocate the vector page early.
-	 */
-	vectors = memblock_alloc(PAGE_SIZE, PAGE_SIZE);
-	if (!vectors)
-		panic("%s: Failed to allocate %lu bytes align=0x%lx\n",
-		      __func__, PAGE_SIZE, PAGE_SIZE);
-
-	for (addr = VMALLOC_END; addr; addr += PGDIR_SIZE)
-		pmd_clear(pmd_off_k(addr));
-
-	/*
-	 * Create a mapping for the machine vectors at the high-vectors
-	 * location (0xffff0000).  If we aren't using high-vectors, also
-	 * create a mapping at the low-vectors virtual address.
-	 */
-	map.pfn = __phys_to_pfn(virt_to_phys(vectors));
-	map.virtual = VECTORS_BASE;
-	map.length = PAGE_SIZE;
-	map.type = MT_HIGH_VECTORS;
-	create_mapping(&map);
-
-	/*
-	 * Create a mapping for the kuser page at the special
-	 * location (0xbfff0000) to the same vectors location.
-	 */
-	map.pfn = __phys_to_pfn(virt_to_phys(vectors));
-	map.virtual = KUSER_VECPAGE_BASE;
-	map.length = PAGE_SIZE;
-	map.type = MT_KUSER;
-	create_mapping(&map);
-
-	/*
-	 * Finally flush the caches and tlb to ensure that we're in a
-	 * consistent state wrt the writebuffer.  This also ensures that
-	 * any write-allocated cache lines in the vector page are written
-	 * back.  After this point, we can start to touch devices again.
-	 */
-	local_flush_tlb_all();
-	flush_cache_all();
-}
-
-static void __init map_lowmem(void)
-{
-	struct memblock_region *reg;
-
-	/* Map all the lowmem memory banks. */
-	for_each_memblock(memory, reg) {
-		phys_addr_t start = reg->base;
-		phys_addr_t end = start + reg->size;
-		struct map_desc map;
-
-		if (end > lowmem_limit)
-			end = lowmem_limit;
-		if (start >= end)
-			break;
-
-		map.pfn = __phys_to_pfn(start);
-		map.virtual = __phys_to_virt(start);
-		map.length = end - start;
-		map.type = MT_MEMORY;
-
-		create_mapping(&map);
-	}
-}
-
-/*
- * paging_init() sets up the page tables, initialises the zone memory
- * maps, and sets up the zero page, bad page and bad page tables.
- */
-void __init paging_init(void)
-{
-	void *zero_page;
-
-	build_mem_type_table();
-	sanity_check_meminfo();
-	prepare_page_table();
-	map_lowmem();
-	devicemaps_init();
-
-	top_pmd = pmd_off_k(0xffff0000);
-
-	/* allocate the zero page. */
-	zero_page = memblock_alloc(PAGE_SIZE, PAGE_SIZE);
-	if (!zero_page)
-		panic("%s: Failed to allocate %lu bytes align=0x%lx\n",
-		      __func__, PAGE_SIZE, PAGE_SIZE);
-
-	bootmem_init();
-
-	empty_zero_page = virt_to_page(zero_page);
-	__flush_dcache_page(NULL, empty_zero_page);
-}
-
-/*
- * In order to soft-boot, we need to insert a 1:1 mapping in place of
- * the user-mode pages.  This will then ensure that we have predictable
- * results when turning the mmu off
- */
-void setup_mm_for_reboot(void)
-{
-	unsigned long base_pmdval;
-	pgd_t *pgd;
-	int i;
-
-	/*
-	 * We need to access to user-mode page tables here. For kernel threads
-	 * we don't have any user-mode mappings so we use the context that we
-	 * "borrowed".
-	 */
-	pgd = current->active_mm->pgd;
-
-	base_pmdval = PMD_SECT_WRITE | PMD_SECT_READ | PMD_TYPE_SECT;
-
-	for (i = 0; i < FIRST_USER_PGD_NR + USER_PTRS_PER_PGD; i++, pgd++) {
-		unsigned long pmdval = (i << PGDIR_SHIFT) | base_pmdval;
-		pmd_t *pmd;
-
-		pmd = pmd_off(pgd, i << PGDIR_SHIFT);
-		set_pmd(pmd, __pmd(pmdval));
-		flush_pmd_entry(pmd);
-	}
-
-	local_flush_tlb_all();
-}
-
-/*
- * Take care of architecture specific things when placing a new PTE into
- * a page table, or changing an existing PTE.  Basically, there are two
- * things that we need to take care of:
- *
- *  1. If PG_dcache_clean is not set for the page, we need to ensure
- *     that any cache entries for the kernels virtual memory
- *     range are written back to the page.
- *  2. If we have multiple shared mappings of the same space in
- *     an object, we need to deal with the cache aliasing issues.
- *
- * Note that the pte lock will be held.
- */
-void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr,
-	pte_t *ptep)
-{
-	unsigned long pfn = pte_pfn(*ptep);
-	struct address_space *mapping;
-	struct page *page;
-
-	if (!pfn_valid(pfn))
-		return;
-
-	/*
-	 * The zero page is never written to, so never has any dirty
-	 * cache lines, and therefore never needs to be flushed.
-	 */
-	page = pfn_to_page(pfn);
-	if (page == ZERO_PAGE(0))
-		return;
-
-	mapping = page_mapping_file(page);
-	if (!test_and_set_bit(PG_dcache_clean, &page->flags))
-		__flush_dcache_page(mapping, page);
-	if (mapping)
-		if (vma->vm_flags & VM_EXEC)
-			__flush_icache_all();
-}
diff --git a/arch/unicore32/mm/pgd.c b/arch/unicore32/mm/pgd.c
deleted file mode 100644
index f01c73e04836..000000000000
--- a/arch/unicore32/mm/pgd.c
+++ /dev/null
@@ -1,102 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/mm/pgd.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/mm.h>
-#include <linux/gfp.h>
-#include <linux/highmem.h>
-
-#include <asm/pgalloc.h>
-#include <asm/page.h>
-#include <asm/tlbflush.h>
-
-#include "mm.h"
-
-#define FIRST_KERNEL_PGD_NR	(FIRST_USER_PGD_NR + USER_PTRS_PER_PGD)
-
-/*
- * need to get a 4k page for level 1
- */
-pgd_t *get_pgd_slow(struct mm_struct *mm)
-{
-	pgd_t *new_pgd, *init_pgd;
-	pmd_t *new_pmd, *init_pmd;
-	pte_t *new_pte, *init_pte;
-
-	new_pgd = (pgd_t *)__get_free_pages(GFP_KERNEL, 0);
-	if (!new_pgd)
-		goto no_pgd;
-
-	memset(new_pgd, 0, FIRST_KERNEL_PGD_NR * sizeof(pgd_t));
-
-	/*
-	 * Copy over the kernel and IO PGD entries
-	 */
-	init_pgd = pgd_offset_k(0);
-	memcpy(new_pgd + FIRST_KERNEL_PGD_NR, init_pgd + FIRST_KERNEL_PGD_NR,
-		       (PTRS_PER_PGD - FIRST_KERNEL_PGD_NR) * sizeof(pgd_t));
-
-	clean_dcache_area(new_pgd, PTRS_PER_PGD * sizeof(pgd_t));
-
-	if (!vectors_high()) {
-		/*
-		 * On UniCore, first page must always be allocated since it
-		 * contains the machine vectors.
-		 */
-		new_pmd = pmd_alloc(mm, (pud_t *)new_pgd, 0);
-		if (!new_pmd)
-			goto no_pmd;
-
-		new_pte = pte_alloc_map(mm, new_pmd, 0);
-		if (!new_pte)
-			goto no_pte;
-
-		init_pmd = pmd_offset((pud_t *)init_pgd, 0);
-		init_pte = pte_offset_map(init_pmd, 0);
-		set_pte(new_pte, *init_pte);
-		pte_unmap(init_pte);
-		pte_unmap(new_pte);
-	}
-
-	return new_pgd;
-
-no_pte:
-	pmd_free(mm, new_pmd);
-	mm_dec_nr_pmds(mm);
-no_pmd:
-	free_pages((unsigned long)new_pgd, 0);
-no_pgd:
-	return NULL;
-}
-
-void free_pgd_slow(struct mm_struct *mm, pgd_t *pgd)
-{
-	pmd_t *pmd;
-	pgtable_t pte;
-
-	if (!pgd)
-		return;
-
-	/* pgd is always present and good */
-	pmd = pmd_off(pgd, 0);
-	if (pmd_none(*pmd))
-		goto free;
-	if (pmd_bad(*pmd)) {
-		pmd_ERROR(*pmd);
-		pmd_clear(pmd);
-		goto free;
-	}
-
-	pte = pmd_pgtable(*pmd);
-	pmd_clear(pmd);
-	pte_free(mm, pte);
-	mm_dec_nr_ptes(mm);
-	pmd_free(mm, pmd);
-	mm_dec_nr_pmds(mm);
-free:
-	free_pages((unsigned long) pgd, 0);
-}
diff --git a/arch/unicore32/mm/proc-macros.S b/arch/unicore32/mm/proc-macros.S
deleted file mode 100644
index 3b0ae7d5bd80..000000000000
--- a/arch/unicore32/mm/proc-macros.S
+++ /dev/null
@@ -1,142 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/mm/proc-macros.S
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- *
- * We need constants.h for:
- *  VMA_VM_MM
- *  VMA_VM_FLAGS
- *  VM_EXEC
- */
-#include <generated/asm-offsets.h>
-#include <asm/thread_info.h>
-#include <asm/memory.h>
-
-/*
- * the cache line sizes of the I and D cache are the same
- */
-#define CACHE_LINESIZE	32
-
-/*
- * This is the maximum size of an area which will be invalidated
- * using the single invalidate entry instructions.  Anything larger
- * than this, and we go for the whole cache.
- *
- * This value should be chosen such that we choose the cheapest
- * alternative.
- */
-#ifdef CONFIG_CPU_UCV2
-#define MAX_AREA_SIZE	0x800		/* 64 cache line */
-#endif
-
-/*
- * vma_vm_mm - get mm pointer from vma pointer (vma->vm_mm)
- */
-	.macro	vma_vm_mm, rd, rn
-	ldw	\rd, [\rn+], #VMA_VM_MM
-	.endm
-
-/*
- * vma_vm_flags - get vma->vm_flags
- */
-	.macro	vma_vm_flags, rd, rn
-	ldw	\rd, [\rn+], #VMA_VM_FLAGS
-	.endm
-
-	.macro	tsk_mm, rd, rn
-	ldw	\rd, [\rn+], #TI_TASK
-	ldw	\rd, [\rd+], #TSK_ACTIVE_MM
-	.endm
-
-/*
- * act_mm - get current->active_mm
- */
-	.macro	act_mm, rd
-	andn	\rd, sp, #8128
-	andn	\rd, \rd, #63
-	ldw	\rd, [\rd+], #TI_TASK
-	ldw	\rd, [\rd+], #TSK_ACTIVE_MM
-	.endm
-
-/*
- * mmid - get context id from mm pointer (mm->context.id)
- */
-	.macro	mmid, rd, rn
-	ldw	\rd, [\rn+], #MM_CONTEXT_ID
-	.endm
-
-/*
- * mask_asid - mask the ASID from the context ID
- */
-	.macro	asid, rd, rn
-	and	\rd, \rn, #255
-	.endm
-
-	.macro	crval, clear, mmuset, ucset
-	.word	\clear
-	.word	\mmuset
-	.endm
-
-#ifndef CONFIG_CPU_DCACHE_LINE_DISABLE
-/*
- * va2pa va, pa, tbl, msk, off, err
- *	This macro is used to translate virtual address to its physical address.
- *
- *	va: virtual address
- *	pa: physical address, result is stored in this register
- *	tbl, msk, off:	temp registers, will be destroyed
- *	err: jump to error label if the physical address not exist
- * NOTE: all regs must be different
- */
-	.macro	va2pa, va, pa, tbl, msk, off, err=990f
-	movc	\pa, p0.c2, #0
-	mov	\off, \va >> #22		@ off <- index of 1st page table
-	adr	\tbl, 910f			@ tbl <- table of 1st page table
-900:						@ ---- handle 1, 2 page table
-	add	\pa, \pa, #PAGE_OFFSET		@ pa <- virt addr of page table
-	ldw	\pa, [\pa+], \off << #2		@ pa <- the content of pt
-	cand.a	\pa, #4				@ test exist bit
-	beq	\err				@ if not exist
-	and	\off, \pa, #3			@ off <- the last 2 bits
-	add	\tbl, \tbl, \off << #3		@ cmove table pointer
-	ldw	\msk, [\tbl+], #0		@ get the mask
-	ldw	pc, [\tbl+], #4
-930:						@ ---- handle 2nd page table
-	and	\pa, \pa, \msk			@ pa <- phys addr of 2nd pt
-	mov	\off, \va << #10
-	cntlo	\tbl, \msk			@ use tbl as temp reg
-	mov	\off, \off >> \tbl
-	mov	\off, \off >> #2		@ off <- index of 2nd pt
-	adr	\tbl, 920f			@ tbl <- table of 2nd pt
-	b	900b
-910:						@ 1st level page table
-	.word	0xfffff000, 930b		@ second level page table
-	.word	0xfffffc00, 930b		@ second level large page table
-	.word	0x00000000, \err		@ invalid
-	.word	0xffc00000, 980f		@ super page
-
-920:						@ 2nd level page table
-	.word	0xfffff000, 980f		@ page
-	.word	0xffffc000, 980f		@ middle page
-	.word	0xffff0000, 980f		@ large page
-	.word	0x00000000, \err		@ invalid
-980:
-	andn	\tbl, \va, \msk
-	and	\pa, \pa, \msk
-	or	\pa, \pa, \tbl
-990:
-	.endm
-#endif
-
-	.macro dcacheline_flush, addr, t1, t2
-	mov	\t1, \addr << #20
-	ldw	\t2, =_stext			@ _stext must ALIGN(4096)
-	add	\t2, \t2, \t1 >> #20
-	ldw	\t1, [\t2+], #0x0000
-	ldw	\t1, [\t2+], #0x1000
-	ldw	\t1, [\t2+], #0x2000
-	ldw	\t1, [\t2+], #0x3000
-	.endm
diff --git a/arch/unicore32/mm/proc-syms.c b/arch/unicore32/mm/proc-syms.c
deleted file mode 100644
index 6c081616fc3c..000000000000
--- a/arch/unicore32/mm/proc-syms.c
+++ /dev/null
@@ -1,19 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/unicore32/mm/proc-syms.c
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/module.h>
-#include <linux/mm.h>
-
-#include <asm/cacheflush.h>
-#include <asm/tlbflush.h>
-#include <asm/page.h>
-
-EXPORT_SYMBOL(cpu_dcache_clean_area);
-EXPORT_SYMBOL(cpu_set_pte);
-
-EXPORT_SYMBOL(__cpuc_coherent_kern_range);
diff --git a/arch/unicore32/mm/proc-ucv2.S b/arch/unicore32/mm/proc-ucv2.S
deleted file mode 100644
index 18f8c4fb21a0..000000000000
--- a/arch/unicore32/mm/proc-ucv2.S
+++ /dev/null
@@ -1,131 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/mm/proc-ucv2.S
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/init.h>
-#include <linux/linkage.h>
-#include <linux/pgtable.h>
-#include <asm/assembler.h>
-#include <asm/hwcap.h>
-#include <asm/pgtable-hwdef.h>
-
-#include "proc-macros.S"
-
-ENTRY(cpu_proc_fin)
-	stm.w	(lr), [sp-]
-	mov	ip, #PSR_R_BIT | PSR_I_BIT | PRIV_MODE
-	mov.a	asr, ip
-	b.l	__cpuc_flush_kern_all
-	ldm.w	(pc), [sp]+
-
-/*
- *	cpu_reset(loc)
- *
- *	Perform a soft reset of the system.  Put the CPU into the
- *	same state as it would be if it had been reset, and branch
- *	to what would be the reset vector.
- *
- *	- loc   - location to jump to for soft reset
- */
-	.align	5
-ENTRY(cpu_reset)
-	mov	ip, #0
-	movc	p0.c5, ip, #28			@ Cache invalidate all
-	nop8
-
-	movc	p0.c6, ip, #6			@ TLB invalidate all
-	nop8
-
-	movc	ip, p0.c1, #0			@ ctrl register
-	or	ip, ip, #0x2000			@ vector base address
-	andn	ip, ip, #0x000f			@ ............idam
-	movc	p0.c1, ip, #0			@ disable caches and mmu
-	nop
-	mov	pc, r0				@ jump to loc
-	nop8
-
-/*
- *	cpu_do_idle()
- *
- *	Idle the processor (eg, wait for interrupt).
- *
- *	IRQs are already disabled.
- */
-ENTRY(cpu_do_idle)
-	mov	r0, #0				@ PCI address
-	.rept	8
-	ldw	r1, [r0]
-	.endr
-	mov	pc, lr
-
-ENTRY(cpu_dcache_clean_area)
-#ifndef CONFIG_CPU_DCACHE_LINE_DISABLE
-	csub.a	r1, #MAX_AREA_SIZE
-	bsg	101f
-	mov	r9, #PAGE_SZ
-	sub	r9, r9, #1			@ PAGE_MASK
-1:	va2pa	r0, r10, r11, r12, r13		@ r10 is PA
-	b	3f
-2:	cand.a	r0, r9
-	beq	1b
-3:	movc	p0.c5, r10, #11			@ clean D entry
-	nop8
-	add	r0, r0, #CACHE_LINESIZE
-	add	r10, r10, #CACHE_LINESIZE
-	sub.a	r1, r1, #CACHE_LINESIZE
-	bua	2b
-	mov	pc, lr
-#endif
-101:	mov	ip, #0
-	movc	p0.c5, ip, #10			@ Dcache clean all
-	nop8
-
-	mov	pc, lr
-
-/*
- *	cpu_do_switch_mm(pgd_phys)
- *
- *	Set the translation table base pointer to be pgd_phys
- *
- *	- pgd_phys - physical address of new pgd
- *
- *	It is assumed that:
- *	- we are not using split page tables
- */
-	.align	5
-ENTRY(cpu_do_switch_mm)
-	movc	p0.c2, r0, #0			@ update page table ptr
-	nop8
-
-	movc	p0.c6, ip, #6			@ TLB invalidate all
-	nop8
-
-	mov	pc, lr
-
-/*
- *	cpu_set_pte(ptep, pte)
- *
- *	Set a level 2 translation table entry.
- *
- *	- ptep  - pointer to level 2 translation table entry
- *	- pte   - PTE value to store
- */
-	.align	5
-ENTRY(cpu_set_pte)
-	stw	r1, [r0]
-#ifndef CONFIG_CPU_DCACHE_LINE_DISABLE
-	sub	r2, r0, #PAGE_OFFSET
-	movc	p0.c5, r2, #11				@ Dcache clean line
-	nop8
-#else
-	mov	ip, #0
-	movc	p0.c5, ip, #10				@ Dcache clean all
-	nop8
-	@dcacheline_flush	r0, r2, ip
-#endif
-	mov	pc, lr
-
diff --git a/arch/unicore32/mm/tlb-ucv2.S b/arch/unicore32/mm/tlb-ucv2.S
deleted file mode 100644
index 0ce9c6b6f1db..000000000000
--- a/arch/unicore32/mm/tlb-ucv2.S
+++ /dev/null
@@ -1,86 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * linux/arch/unicore32/mm/tlb-ucv2.S
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- * Copyright (C) 2001-2010 GUAN Xue-tao
- */
-#include <linux/init.h>
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <asm/page.h>
-#include <asm/tlbflush.h>
-#include "proc-macros.S"
-
-/*
- *	__cpu_flush_user_tlb_range(start, end, vma)
- *
- *	Invalidate a range of TLB entries in the specified address space.
- *
- *	- start - start address (may not be aligned)
- *	- end   - end address (exclusive, may not be aligned)
- *	- vma   - vma_struct describing address range
- */
-ENTRY(__cpu_flush_user_tlb_range)
-#ifndef	CONFIG_CPU_TLB_SINGLE_ENTRY_DISABLE
-	mov	r0, r0 >> #PAGE_SHIFT		@ align address
-	mov	r0, r0 << #PAGE_SHIFT
-	vma_vm_flags r2, r2			@ get vma->vm_flags
-1:
-	movc	p0.c6, r0, #3
-	nop8
-
-	cand.a	r2, #VM_EXEC			@ Executable area ?
-	beq	2f
-
-	movc	p0.c6, r0, #5
-	nop8
-2:
-	add	r0, r0, #PAGE_SZ
-	csub.a	r0, r1
-	beb	1b
-#else
-	movc	p0.c6, r0, #2
-	nop8
-
-	cand.a	r2, #VM_EXEC			@ Executable area ?
-	beq	2f
-
-	movc	p0.c6, r0, #4
-	nop8
-2:
-#endif
-	mov	pc, lr
-
-/*
- *	__cpu_flush_kern_tlb_range(start,end)
- *
- *	Invalidate a range of kernel TLB entries
- *
- *	- start - start address (may not be aligned)
- *	- end   - end address (exclusive, may not be aligned)
- */
-ENTRY(__cpu_flush_kern_tlb_range)
-#ifndef	CONFIG_CPU_TLB_SINGLE_ENTRY_DISABLE
-	mov	r0, r0 >> #PAGE_SHIFT		@ align address
-	mov	r0, r0 << #PAGE_SHIFT
-1:
-	movc	p0.c6, r0, #3
-	nop8
-
-	movc	p0.c6, r0, #5
-	nop8
-
-	add	r0, r0, #PAGE_SZ
-	csub.a	r0, r1
-	beb	1b
-#else
-	movc	p0.c6, r0, #2
-	nop8
-
-	movc	p0.c6, r0, #4
-	nop8
-#endif
-	mov	pc, lr
-
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 6a0cc524882d..fd03cefabd34 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -67,7 +67,7 @@ config X86
 	select ARCH_HAS_FILTER_PGPROT
 	select ARCH_HAS_FORTIFY_SOURCE
 	select ARCH_HAS_GCOV_PROFILE_ALL
-	select ARCH_HAS_KCOV			if X86_64
+	select ARCH_HAS_KCOV			if X86_64 && STACK_VALIDATION
 	select ARCH_HAS_MEM_ENCRYPT
 	select ARCH_HAS_MEMBARRIER_SYNC_CORE
 	select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE
@@ -115,6 +115,7 @@ config X86
 	select GENERIC_CPU_AUTOPROBE
 	select GENERIC_CPU_VULNERABILITIES
 	select GENERIC_EARLY_IOREMAP
+	select GENERIC_ENTRY
 	select GENERIC_FIND_FIRST_BIT
 	select GENERIC_IOMAP
 	select GENERIC_IRQ_EFFECTIVE_AFF_MASK	if SMP
@@ -161,7 +162,6 @@ config X86
 	select HAVE_CMPXCHG_DOUBLE
 	select HAVE_CMPXCHG_LOCAL
 	select HAVE_CONTEXT_TRACKING		if X86_64
-	select HAVE_COPY_THREAD_TLS
 	select HAVE_C_RECORDMCOUNT
 	select HAVE_DEBUG_KMEMLEAK
 	select HAVE_DMA_CONTIGUOUS
@@ -188,6 +188,7 @@ config X86
 	select HAVE_KERNEL_LZMA
 	select HAVE_KERNEL_LZO
 	select HAVE_KERNEL_XZ
+	select HAVE_KERNEL_ZSTD
 	select HAVE_KPROBES
 	select HAVE_KPROBES_ON_FTRACE
 	select HAVE_FUNCTION_ERROR_INJECTION
@@ -909,6 +910,7 @@ config DMI
 
 config GART_IOMMU
 	bool "Old AMD GART IOMMU support"
+	select DMA_OPS
 	select IOMMU_HELPER
 	select SWIOTLB
 	depends on X86_64 && PCI && AMD_NB
@@ -1292,7 +1294,6 @@ config MICROCODE
 	bool "CPU microcode loading support"
 	default y
 	depends on CPU_SUP_AMD || CPU_SUP_INTEL
-	select FW_LOADER
 	help
 	  If you say Y here, you will be able to update the microcode on
 	  Intel and AMD processors. The Intel support is for the IA32 family,
@@ -1314,7 +1315,6 @@ config MICROCODE_INTEL
 	bool "Intel microcode loading support"
 	depends on MICROCODE
 	default MICROCODE
-	select FW_LOADER
 	help
 	  This options enables microcode patch loading support for Intel
 	  processors.
@@ -1326,7 +1326,6 @@ config MICROCODE_INTEL
 config MICROCODE_AMD
 	bool "AMD microcode loading support"
 	depends on MICROCODE
-	select FW_LOADER
 	help
 	  If you select this option, microcode patch loading support for AMD
 	  processors will be enabled.
diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
index 0dd319e6e5b4..ee1d3c5834c6 100644
--- a/arch/x86/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
@@ -3,6 +3,9 @@
 config TRACE_IRQFLAGS_SUPPORT
 	def_bool y
 
+config TRACE_IRQFLAGS_NMI_SUPPORT
+	def_bool y
+
 config EARLY_PRINTK_USB
 	bool
 
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 00e378de8bc0..1e634d7ee6eb 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -47,10 +47,6 @@ export REALMODE_CFLAGS
 # e.g.: obj-y += foo_$(BITS).o
 export BITS
 
-ifdef CONFIG_X86_NEED_RELOCS
-        LDFLAGS_vmlinux := --emit-relocs --discard-none
-endif
-
 #
 # Prevent GCC from generating any FP code by mistake.
 #
@@ -177,17 +173,6 @@ ifeq ($(ACCUMULATE_OUTGOING_ARGS), 1)
 	KBUILD_CFLAGS += $(call cc-option,-maccumulate-outgoing-args,)
 endif
 
-KBUILD_LDFLAGS := -m elf_$(UTS_MACHINE)
-
-#
-# The 64-bit kernel must be aligned to 2MB.  Pass -z max-page-size=0x200000 to
-# the linker to force 2MB page size regardless of the default page size used
-# by the linker.
-#
-ifdef CONFIG_X86_64
-KBUILD_LDFLAGS += $(call ld-option, -z max-page-size=0x200000)
-endif
-
 # Workaround for a gcc prelease that unfortunately was shipped in a suse release
 KBUILD_CFLAGS += -Wno-sign-compare
 #
@@ -207,6 +192,23 @@ ifdef CONFIG_RETPOLINE
   endif
 endif
 
+KBUILD_LDFLAGS := -m elf_$(UTS_MACHINE)
+
+ifdef CONFIG_X86_NEED_RELOCS
+LDFLAGS_vmlinux := --emit-relocs --discard-none
+else
+LDFLAGS_vmlinux :=
+endif
+
+#
+# The 64-bit kernel must be aligned to 2MB.  Pass -z max-page-size=0x200000 to
+# the linker to force 2MB page size regardless of the default page size used
+# by the linker.
+#
+ifdef CONFIG_X86_64
+LDFLAGS_vmlinux += -z max-page-size=0x200000
+endif
+
 archscripts: scripts_basic
 	$(Q)$(MAKE) $(build)=arch/x86/tools relocs
 
diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile
index 7619742f91c9..c08714ae76ec 100644
--- a/arch/x86/boot/compressed/Makefile
+++ b/arch/x86/boot/compressed/Makefile
@@ -26,7 +26,7 @@ OBJECT_FILES_NON_STANDARD	:= y
 KCOV_INSTRUMENT		:= n
 
 targets := vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma \
-	vmlinux.bin.xz vmlinux.bin.lzo vmlinux.bin.lz4
+	vmlinux.bin.xz vmlinux.bin.lzo vmlinux.bin.lz4 vmlinux.bin.zst
 
 KBUILD_CFLAGS := -m$(BITS) -O2
 KBUILD_CFLAGS += -fno-strict-aliasing $(call cc-option, -fPIE, -fPIC)
@@ -42,6 +42,7 @@ KBUILD_CFLAGS += $(call cc-disable-warning, gnu)
 KBUILD_CFLAGS += -Wno-pointer-sign
 KBUILD_CFLAGS += $(call cc-option,-fmacro-prefix-map=$(srctree)/=)
 KBUILD_CFLAGS += -fno-asynchronous-unwind-tables
+KBUILD_CFLAGS += -D__DISABLE_EXPORTS
 
 KBUILD_AFLAGS  := $(KBUILD_CFLAGS) -D__ASSEMBLY__
 GCOV_PROFILE := n
@@ -90,8 +91,8 @@ endif
 
 vmlinux-objs-$(CONFIG_ACPI) += $(obj)/acpi.o
 
-vmlinux-objs-$(CONFIG_EFI_STUB) += $(objtree)/drivers/firmware/efi/libstub/lib.a
 vmlinux-objs-$(CONFIG_EFI_MIXED) += $(obj)/efi_thunk_$(BITS).o
+efi-obj-$(CONFIG_EFI_STUB) = $(objtree)/drivers/firmware/efi/libstub/lib.a
 
 # The compressed kernel is built with -fPIC/-fPIE so that a boot loader
 # can place it anywhere in memory and it will still run. However, since
@@ -115,7 +116,7 @@ endef
 quiet_cmd_check-and-link-vmlinux = LD      $@
       cmd_check-and-link-vmlinux = $(cmd_check_data_rel); $(cmd_ld)
 
-$(obj)/vmlinux: $(vmlinux-objs-y) FORCE
+$(obj)/vmlinux: $(vmlinux-objs-y) $(efi-obj-y) FORCE
 	$(call if_changed,check-and-link-vmlinux)
 
 OBJCOPYFLAGS_vmlinux.bin :=  -R .comment -S
@@ -145,6 +146,8 @@ $(obj)/vmlinux.bin.lzo: $(vmlinux.bin.all-y) FORCE
 	$(call if_changed,lzo)
 $(obj)/vmlinux.bin.lz4: $(vmlinux.bin.all-y) FORCE
 	$(call if_changed,lz4)
+$(obj)/vmlinux.bin.zst: $(vmlinux.bin.all-y) FORCE
+	$(call if_changed,zstd22)
 
 suffix-$(CONFIG_KERNEL_GZIP)	:= gz
 suffix-$(CONFIG_KERNEL_BZIP2)	:= bz2
@@ -152,6 +155,7 @@ suffix-$(CONFIG_KERNEL_LZMA)	:= lzma
 suffix-$(CONFIG_KERNEL_XZ)	:= xz
 suffix-$(CONFIG_KERNEL_LZO) 	:= lzo
 suffix-$(CONFIG_KERNEL_LZ4) 	:= lz4
+suffix-$(CONFIG_KERNEL_ZSTD)	:= zst
 
 quiet_cmd_mkpiggy = MKPIGGY $@
       cmd_mkpiggy = $(obj)/mkpiggy $< > $@
diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index e821a7d7d5c4..97d37f0a34f5 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -213,7 +213,6 @@ SYM_FUNC_START(startup_32)
 	 * We place all of the values on our mini stack so lret can
 	 * used to perform that far jump.
 	 */
-	pushl	$__KERNEL_CS
 	leal	startup_64(%ebp), %eax
 #ifdef CONFIG_EFI_MIXED
 	movl	efi32_boot_args(%ebp), %edi
@@ -224,11 +223,20 @@ SYM_FUNC_START(startup_32)
 	movl	efi32_boot_args+8(%ebp), %edx	// saved bootparams pointer
 	cmpl	$0, %edx
 	jnz	1f
+	/*
+	 * efi_pe_entry uses MS calling convention, which requires 32 bytes of
+	 * shadow space on the stack even if all arguments are passed in
+	 * registers. We also need an additional 8 bytes for the space that
+	 * would be occupied by the return address, and this also results in
+	 * the correct stack alignment for entry.
+	 */
+	subl	$40, %esp
 	leal	efi_pe_entry(%ebp), %eax
 	movl	%edi, %ecx			// MS calling convention
 	movl	%esi, %edx
 1:
 #endif
+	pushl	$__KERNEL_CS
 	pushl	%eax
 
 	/* Enter paged protected Mode, activating Long Mode */
@@ -784,6 +792,7 @@ SYM_DATA_LOCAL(boot_heap,	.fill BOOT_HEAP_SIZE, 1, 0)
 
 SYM_DATA_START_LOCAL(boot_stack)
 	.fill BOOT_STACK_SIZE, 1, 0
+	.balign 16
 SYM_DATA_END_LABEL(boot_stack, SYM_L_LOCAL, boot_stack_end)
 
 /*
diff --git a/arch/x86/boot/compressed/kaslr.c b/arch/x86/boot/compressed/kaslr.c
index d7408af55738..0048269180d5 100644
--- a/arch/x86/boot/compressed/kaslr.c
+++ b/arch/x86/boot/compressed/kaslr.c
@@ -19,13 +19,6 @@
  */
 #define BOOT_CTYPE_H
 
-/*
- * _ctype[] in lib/ctype.c is needed by isspace() of linux/ctype.h.
- * While both lib/ctype.c and lib/cmdline.c will bring EXPORT_SYMBOL
- * which is meaningless and will cause compiling error in some cases.
- */
-#define __DISABLE_EXPORTS
-
 #include "misc.h"
 #include "error.h"
 #include "../string.h"
diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c
index 9652d5c2afda..39e592d0e0b4 100644
--- a/arch/x86/boot/compressed/misc.c
+++ b/arch/x86/boot/compressed/misc.c
@@ -77,6 +77,10 @@ static int lines, cols;
 #ifdef CONFIG_KERNEL_LZ4
 #include "../../../../lib/decompress_unlz4.c"
 #endif
+
+#ifdef CONFIG_KERNEL_ZSTD
+#include "../../../../lib/decompress_unzstd.c"
+#endif
 /*
  * NOTE: When adding a new decompressor, please update the analysis in
  * ../header.S.
diff --git a/arch/x86/boot/header.S b/arch/x86/boot/header.S
index 735ad7f21ab0..6dbd7e9f74c9 100644
--- a/arch/x86/boot/header.S
+++ b/arch/x86/boot/header.S
@@ -539,8 +539,14 @@ pref_address:		.quad LOAD_PHYSICAL_ADDR	# preferred load addr
 # the size-dependent part now grows so fast.
 #
 # extra_bytes = (uncompressed_size >> 8) + 65536
+#
+# ZSTD compressed data grows by at most 3 bytes per 128K, and only has a 22
+# byte fixed overhead but has a maximum block size of 128K, so it needs a
+# larger margin.
+#
+# extra_bytes = (uncompressed_size >> 8) + 131072
 
-#define ZO_z_extra_bytes	((ZO_z_output_len >> 8) + 65536)
+#define ZO_z_extra_bytes	((ZO_z_output_len >> 8) + 131072)
 #if ZO_z_output_len > ZO_z_input_len
 # define ZO_z_extract_offset	(ZO_z_output_len + ZO_z_extra_bytes - \
 				 ZO_z_input_len)
diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig
index 550904591e94..d7577fece9eb 100644
--- a/arch/x86/configs/i386_defconfig
+++ b/arch/x86/configs/i386_defconfig
@@ -1,39 +1,29 @@
-# CONFIG_64BIT is not set
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_AUDIT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_TASKSTATS=y
 CONFIG_TASK_DELAY_ACCT=y
 CONFIG_TASK_XACCT=y
 CONFIG_TASK_IO_ACCOUNTING=y
-CONFIG_FHANDLE=y
-CONFIG_AUDIT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
 CONFIG_LOG_BUF_SHIFT=18
 CONFIG_CGROUPS=y
+CONFIG_CGROUP_SCHED=y
 CONFIG_CGROUP_FREEZER=y
 CONFIG_CPUSETS=y
 CONFIG_CGROUP_CPUACCT=y
-CONFIG_CGROUP_SCHED=y
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_PROFILING=y
-CONFIG_KPROBES=y
-CONFIG_JUMP_LABEL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_SMP=y
 CONFIG_X86_GENERIC=y
 CONFIG_HPET_TIMER=y
-CONFIG_SCHED_SMT=y
-CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
-CONFIG_X86_MCE=y
 CONFIG_X86_REBOOTFIXUPS=y
-CONFIG_MICROCODE=y
 CONFIG_MICROCODE_AMD=y
 CONFIG_X86_MSR=y
 CONFIG_X86_CPUID=y
@@ -41,28 +31,25 @@ CONFIG_HIGHPTE=y
 CONFIG_X86_CHECK_BIOS_CORRUPTION=y
 # CONFIG_MTRR_SANITIZER is not set
 CONFIG_EFI=y
+CONFIG_EFI_STUB=y
 CONFIG_HZ_1000=y
 CONFIG_KEXEC=y
 CONFIG_CRASH_DUMP=y
-CONFIG_RANDOMIZE_BASE=y
-CONFIG_RANDOMIZE_MEMORY=y
-# CONFIG_COMPAT_VDSO is not set
 CONFIG_HIBERNATION=y
 CONFIG_PM_DEBUG=y
 CONFIG_PM_TRACE_RTC=y
 CONFIG_ACPI_DOCK=y
-CONFIG_CPU_FREQ=y
-# CONFIG_CPU_FREQ_STAT is not set
+CONFIG_ACPI_BGRT=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
 CONFIG_X86_ACPI_CPUFREQ=y
-CONFIG_PCI=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCI_MSI=y
-CONFIG_PCCARD=y
-CONFIG_YENTA=y
-CONFIG_HOTPLUG_PCI=y
+CONFIG_EFI_VARS=y
+CONFIG_KPROBES=y
+CONFIG_JUMP_LABEL=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_BINFMT_MISC=y
 CONFIG_NET=y
 CONFIG_PACKET=y
@@ -82,16 +69,12 @@ CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_DIAG is not set
 CONFIG_TCP_CONG_ADVANCED=y
 # CONFIG_TCP_CONG_BIC is not set
 # CONFIG_TCP_CONG_WESTWOOD is not set
 # CONFIG_TCP_CONG_HTCP is not set
 CONFIG_TCP_MD5SIG=y
-CONFIG_IPV6=y
 CONFIG_INET6_AH=y
 CONFIG_INET6_ESP=y
 CONFIG_NETLABEL=y
@@ -102,6 +85,7 @@ CONFIG_NF_CONNTRACK_FTP=y
 CONFIG_NF_CONNTRACK_IRC=y
 CONFIG_NF_CONNTRACK_SIP=y
 CONFIG_NF_CT_NETLINK=y
+CONFIG_NF_NAT=y
 CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
 CONFIG_NETFILTER_XT_TARGET_NFLOG=y
 CONFIG_NETFILTER_XT_TARGET_SECMARK=y
@@ -109,14 +93,11 @@ CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
 CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
 CONFIG_NETFILTER_XT_MATCH_POLICY=y
 CONFIG_NETFILTER_XT_MATCH_STATE=y
-CONFIG_NF_CONNTRACK_IPV4=y
 CONFIG_IP_NF_IPTABLES=y
 CONFIG_IP_NF_FILTER=y
 CONFIG_IP_NF_TARGET_REJECT=y
-CONFIG_NF_NAT=y
-CONFIG_IP_NF_TARGET_MASQUERADE=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_MANGLE=y
-CONFIG_NF_CONNTRACK_IPV6=y
 CONFIG_IP6_NF_IPTABLES=y
 CONFIG_IP6_NF_MATCH_IPV6HEADER=y
 CONFIG_IP6_NF_FILTER=y
@@ -129,6 +110,12 @@ CONFIG_CFG80211=y
 CONFIG_MAC80211=y
 CONFIG_MAC80211_LEDS=y
 CONFIG_RFKILL=y
+CONFIG_PCI=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCI_MSI=y
+CONFIG_HOTPLUG_PCI=y
+CONFIG_PCCARD=y
+CONFIG_YENTA=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_DEBUG_DEVRES=y
@@ -170,15 +157,12 @@ CONFIG_8139TOO=y
 # CONFIG_8139TOO_PIO is not set
 CONFIG_R8169=y
 CONFIG_INPUT_POLLDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_EVDEV=y
 CONFIG_INPUT_JOYSTICK=y
 CONFIG_INPUT_TABLET=y
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_INPUT_MISC=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_NONSTANDARD=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
@@ -187,6 +171,7 @@ CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
+CONFIG_SERIAL_NONSTANDARD=y
 CONFIG_HW_RANDOM=y
 CONFIG_NVRAM=y
 CONFIG_HPET=y
@@ -201,19 +186,15 @@ CONFIG_DRM_I915=y
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
 CONFIG_FB_EFI=y
-# CONFIG_LCD_CLASS_DEVICE is not set
 CONFIG_VGACON_SOFT_SCROLLBACK=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
 CONFIG_SOUND=y
 CONFIG_SND=y
+CONFIG_SND_HRTIMER=y
 CONFIG_SND_SEQUENCER=y
 CONFIG_SND_SEQ_DUMMY=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_SEQUENCER_OSS=y
-CONFIG_SND_HRTIMER=y
 CONFIG_SND_HDA_INTEL=y
 CONFIG_SND_HDA_HWDEP=y
 CONFIG_HIDRAW=y
@@ -234,17 +215,14 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_MON=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_TT_NEWSCHED=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_UHCI_HCD=y
 CONFIG_USB_PRINTER=y
 CONFIG_USB_STORAGE=y
-CONFIG_EDAC=y
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
 CONFIG_DMADEVICES=y
 CONFIG_EEEPC_LAPTOP=y
-CONFIG_EFI_VARS=y
 CONFIG_EXT4_FS=y
 CONFIG_EXT4_FS_POSIX_ACL=y
 CONFIG_EXT4_FS_SECURITY=y
@@ -270,27 +248,19 @@ CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_UTF8=y
+CONFIG_SECURITY=y
+CONFIG_SECURITY_NETWORK=y
+CONFIG_SECURITY_SELINUX=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM=y
+CONFIG_SECURITY_SELINUX_DISABLE=y
 CONFIG_PRINTK_TIME=y
-CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_STACK_USAGE=y
+CONFIG_DEBUG_STACKOVERFLOW=y
 # CONFIG_SCHED_DEBUG is not set
 CONFIG_SCHEDSTATS=y
-CONFIG_TIMER_STATS=y
-CONFIG_DEBUG_STACK_USAGE=y
 CONFIG_BLK_DEV_IO_TRACE=y
 CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
 CONFIG_EARLY_PRINTK_DBGP=y
-CONFIG_DEBUG_STACKOVERFLOW=y
-# CONFIG_DEBUG_RODATA_TEST is not set
 CONFIG_DEBUG_BOOT_PARAMS=y
-CONFIG_SECURITY=y
-CONFIG_SECURITY_NETWORK=y
-CONFIG_SECURITY_SELINUX=y
-CONFIG_SECURITY_SELINUX_BOOTPARAM=y
-CONFIG_SECURITY_SELINUX_DISABLE=y
-CONFIG_CRYPTO_AES_586=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_EFI_STUB=y
-CONFIG_ACPI_BGRT=y
diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig
index 614961009075..f85600143747 100644
--- a/arch/x86/configs/x86_64_defconfig
+++ b/arch/x86/configs/x86_64_defconfig
@@ -1,36 +1,26 @@
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_AUDIT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_TASKSTATS=y
 CONFIG_TASK_DELAY_ACCT=y
 CONFIG_TASK_XACCT=y
 CONFIG_TASK_IO_ACCOUNTING=y
-CONFIG_FHANDLE=y
-CONFIG_AUDIT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
 CONFIG_LOG_BUF_SHIFT=18
 CONFIG_CGROUPS=y
+CONFIG_CGROUP_SCHED=y
 CONFIG_CGROUP_FREEZER=y
 CONFIG_CPUSETS=y
 CONFIG_CGROUP_CPUACCT=y
-CONFIG_CGROUP_SCHED=y
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_PROFILING=y
-CONFIG_KPROBES=y
-CONFIG_JUMP_LABEL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_SMP=y
-CONFIG_NR_CPUS=64
-CONFIG_SCHED_SMT=y
-CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
-CONFIG_X86_MCE=y
-CONFIG_MICROCODE=y
 CONFIG_MICROCODE_AMD=y
 CONFIG_X86_MSR=y
 CONFIG_X86_CPUID=y
@@ -38,30 +28,28 @@ CONFIG_NUMA=y
 CONFIG_X86_CHECK_BIOS_CORRUPTION=y
 # CONFIG_MTRR_SANITIZER is not set
 CONFIG_EFI=y
+CONFIG_EFI_STUB=y
+CONFIG_EFI_MIXED=y
 CONFIG_HZ_1000=y
 CONFIG_KEXEC=y
 CONFIG_CRASH_DUMP=y
-CONFIG_RANDOMIZE_BASE=y
-CONFIG_RANDOMIZE_MEMORY=y
-# CONFIG_COMPAT_VDSO is not set
 CONFIG_HIBERNATION=y
 CONFIG_PM_DEBUG=y
 CONFIG_PM_TRACE_RTC=y
 CONFIG_ACPI_DOCK=y
-CONFIG_CPU_FREQ=y
-# CONFIG_CPU_FREQ_STAT is not set
+CONFIG_ACPI_BGRT=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
 CONFIG_X86_ACPI_CPUFREQ=y
-CONFIG_PCI=y
-CONFIG_PCI_MMCONFIG=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCCARD=y
-CONFIG_YENTA=y
-CONFIG_HOTPLUG_PCI=y
-CONFIG_BINFMT_MISC=y
 CONFIG_IA32_EMULATION=y
+CONFIG_EFI_VARS=y
+CONFIG_KPROBES=y
+CONFIG_JUMP_LABEL=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_BINFMT_MISC=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -80,16 +68,12 @@ CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_DIAG is not set
 CONFIG_TCP_CONG_ADVANCED=y
 # CONFIG_TCP_CONG_BIC is not set
 # CONFIG_TCP_CONG_WESTWOOD is not set
 # CONFIG_TCP_CONG_HTCP is not set
 CONFIG_TCP_MD5SIG=y
-CONFIG_IPV6=y
 CONFIG_INET6_AH=y
 CONFIG_INET6_ESP=y
 CONFIG_NETLABEL=y
@@ -100,6 +84,7 @@ CONFIG_NF_CONNTRACK_FTP=y
 CONFIG_NF_CONNTRACK_IRC=y
 CONFIG_NF_CONNTRACK_SIP=y
 CONFIG_NF_CT_NETLINK=y
+CONFIG_NF_NAT=y
 CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
 CONFIG_NETFILTER_XT_TARGET_NFLOG=y
 CONFIG_NETFILTER_XT_TARGET_SECMARK=y
@@ -107,14 +92,11 @@ CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
 CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
 CONFIG_NETFILTER_XT_MATCH_POLICY=y
 CONFIG_NETFILTER_XT_MATCH_STATE=y
-CONFIG_NF_CONNTRACK_IPV4=y
 CONFIG_IP_NF_IPTABLES=y
 CONFIG_IP_NF_FILTER=y
 CONFIG_IP_NF_TARGET_REJECT=y
-CONFIG_NF_NAT=y
-CONFIG_IP_NF_TARGET_MASQUERADE=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_MANGLE=y
-CONFIG_NF_CONNTRACK_IPV6=y
 CONFIG_IP6_NF_IPTABLES=y
 CONFIG_IP6_NF_MATCH_IPV6HEADER=y
 CONFIG_IP6_NF_FILTER=y
@@ -127,6 +109,11 @@ CONFIG_CFG80211=y
 CONFIG_MAC80211=y
 CONFIG_MAC80211_LEDS=y
 CONFIG_RFKILL=y
+CONFIG_PCI=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_HOTPLUG_PCI=y
+CONFIG_PCCARD=y
+CONFIG_YENTA=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_DEBUG_DEVRES=y
@@ -163,15 +150,12 @@ CONFIG_FORCEDETH=y
 CONFIG_8139TOO=y
 CONFIG_R8169=y
 CONFIG_INPUT_POLLDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_EVDEV=y
 CONFIG_INPUT_JOYSTICK=y
 CONFIG_INPUT_TABLET=y
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_INPUT_MISC=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_NONSTANDARD=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=32
@@ -180,6 +164,7 @@ CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_DETECT_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
+CONFIG_SERIAL_NONSTANDARD=y
 CONFIG_HW_RANDOM=y
 # CONFIG_HW_RANDOM_INTEL is not set
 # CONFIG_HW_RANDOM_AMD is not set
@@ -196,19 +181,15 @@ CONFIG_DRM_I915=y
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
 CONFIG_FB_EFI=y
-# CONFIG_LCD_CLASS_DEVICE is not set
 CONFIG_VGACON_SOFT_SCROLLBACK=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
 CONFIG_SOUND=y
 CONFIG_SND=y
+CONFIG_SND_HRTIMER=y
 CONFIG_SND_SEQUENCER=y
 CONFIG_SND_SEQ_DUMMY=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_SEQUENCER_OSS=y
-CONFIG_SND_HRTIMER=y
 CONFIG_SND_HDA_INTEL=y
 CONFIG_SND_HDA_HWDEP=y
 CONFIG_HIDRAW=y
@@ -229,12 +210,10 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_MON=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_TT_NEWSCHED=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_UHCI_HCD=y
 CONFIG_USB_PRINTER=y
 CONFIG_USB_STORAGE=y
-CONFIG_EDAC=y
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
 CONFIG_DMADEVICES=y
@@ -242,7 +221,6 @@ CONFIG_EEEPC_LAPTOP=y
 CONFIG_AMD_IOMMU=y
 CONFIG_INTEL_IOMMU=y
 # CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
-CONFIG_EFI_VARS=y
 CONFIG_EXT4_FS=y
 CONFIG_EXT4_FS_POSIX_ACL=y
 CONFIG_EXT4_FS_SECURITY=y
@@ -268,27 +246,18 @@ CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_UTF8=y
+CONFIG_SECURITY=y
+CONFIG_SECURITY_NETWORK=y
+CONFIG_SECURITY_SELINUX=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM=y
+CONFIG_SECURITY_SELINUX_DISABLE=y
 CONFIG_PRINTK_TIME=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_STACK_USAGE=y
 # CONFIG_SCHED_DEBUG is not set
 CONFIG_SCHEDSTATS=y
-CONFIG_TIMER_STATS=y
-CONFIG_DEBUG_STACK_USAGE=y
 CONFIG_BLK_DEV_IO_TRACE=y
 CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
 CONFIG_EARLY_PRINTK_DBGP=y
-CONFIG_DEBUG_STACKOVERFLOW=y
-# CONFIG_DEBUG_RODATA_TEST is not set
 CONFIG_DEBUG_BOOT_PARAMS=y
-CONFIG_UNWINDER_ORC=y
-CONFIG_SECURITY=y
-CONFIG_SECURITY_NETWORK=y
-CONFIG_SECURITY_SELINUX=y
-CONFIG_SECURITY_SELINUX_BOOTPARAM=y
-CONFIG_SECURITY_SELINUX_DISABLE=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_EFI_STUB=y
-CONFIG_EFI_MIXED=y
-CONFIG_ACPI_BGRT=y
diff --git a/arch/x86/crypto/aes_ctrby8_avx-x86_64.S b/arch/x86/crypto/aes_ctrby8_avx-x86_64.S
index ec437db1fa54..3f0fc7dd87d7 100644
--- a/arch/x86/crypto/aes_ctrby8_avx-x86_64.S
+++ b/arch/x86/crypto/aes_ctrby8_avx-x86_64.S
@@ -63,7 +63,6 @@
  */
 
 #include <linux/linkage.h>
-#include <asm/inst.h>
 
 #define VMOVDQ		vmovdqu
 
@@ -127,10 +126,6 @@ ddq_add_8:
 
 /* generate a unique variable for ddq_add_x */
 
-.macro setddq n
-	var_ddq_add = ddq_add_\n
-.endm
-
 /* generate a unique variable for xmm register */
 .macro setxdata n
 	var_xdata = %xmm\n
@@ -140,9 +135,7 @@ ddq_add_8:
 
 .macro club name, id
 .altmacro
-	.if \name == DDQ_DATA
-		setddq %\id
-	.elseif \name == XDATA
+	.if \name == XDATA
 		setxdata %\id
 	.endif
 .noaltmacro
@@ -165,9 +158,8 @@ ddq_add_8:
 
 	.set i, 1
 	.rept (by - 1)
-		club DDQ_DATA, i
 		club XDATA, i
-		vpaddq	var_ddq_add(%rip), xcounter, var_xdata
+		vpaddq	(ddq_add_1 + 16 * (i - 1))(%rip), xcounter, var_xdata
 		vptest	ddq_low_msk(%rip), var_xdata
 		jnz 1f
 		vpaddq	ddq_high_add_1(%rip), var_xdata, var_xdata
@@ -180,8 +172,7 @@ ddq_add_8:
 	vmovdqa	1*16(p_keys), xkeyA
 
 	vpxor	xkey0, xdata0, xdata0
-	club DDQ_DATA, by
-	vpaddq	var_ddq_add(%rip), xcounter, xcounter
+	vpaddq	(ddq_add_1 + 16 * (by - 1))(%rip), xcounter, xcounter
 	vptest	ddq_low_msk(%rip), xcounter
 	jnz	1f
 	vpaddq	ddq_high_add_1(%rip), xcounter, xcounter
diff --git a/arch/x86/crypto/aesni-intel_asm.S b/arch/x86/crypto/aesni-intel_asm.S
index 54e7d15dbd0d..1852b19a73a0 100644
--- a/arch/x86/crypto/aesni-intel_asm.S
+++ b/arch/x86/crypto/aesni-intel_asm.S
@@ -26,7 +26,6 @@
  */
 
 #include <linux/linkage.h>
-#include <asm/inst.h>
 #include <asm/frame.h>
 #include <asm/nospec-branch.h>
 
@@ -201,7 +200,7 @@ ALL_F:      .octa 0xffffffffffffffffffffffffffffffff
 	mov	\SUBKEY, %r12
 	movdqu	(%r12), \TMP3
 	movdqa	SHUF_MASK(%rip), \TMP2
-	PSHUFB_XMM \TMP2, \TMP3
+	pshufb	\TMP2, \TMP3
 
 	# precompute HashKey<<1 mod poly from the HashKey (required for GHASH)
 
@@ -263,10 +262,10 @@ ALL_F:      .octa 0xffffffffffffffffffffffffffffffff
 	movdqu %xmm0, OrigIV(%arg2) # ctx_data.orig_IV = iv
 
 	movdqa  SHUF_MASK(%rip), %xmm2
-	PSHUFB_XMM %xmm2, %xmm0
+	pshufb %xmm2, %xmm0
 	movdqu %xmm0, CurCount(%arg2) # ctx_data.current_counter = iv
 
-	PRECOMPUTE \SUBKEY, %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7,
+	PRECOMPUTE \SUBKEY, %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7
 	movdqu HashKey(%arg2), %xmm13
 
 	CALC_AAD_HASH %xmm13, \AAD, \AADLEN, %xmm0, %xmm1, %xmm2, %xmm3, \
@@ -347,7 +346,7 @@ _zero_cipher_left_\@:
 	paddd ONE(%rip), %xmm0                # INCR CNT to get Yn
 	movdqu %xmm0, CurCount(%arg2)
 	movdqa SHUF_MASK(%rip), %xmm10
-	PSHUFB_XMM %xmm10, %xmm0
+	pshufb %xmm10, %xmm0
 
 	ENCRYPT_SINGLE_BLOCK	%xmm0, %xmm1        # Encrypt(K, Yn)
 	movdqu %xmm0, PBlockEncKey(%arg2)
@@ -377,7 +376,7 @@ _large_enough_update_\@:
 	# get the appropriate shuffle mask
 	movdqu	(%r12), %xmm2
 	# shift right 16-r13 bytes
-	PSHUFB_XMM  %xmm2, %xmm1
+	pshufb  %xmm2, %xmm1
 
 _data_read_\@:
 	lea ALL_F+16(%rip), %r12
@@ -393,12 +392,12 @@ _data_read_\@:
 .ifc \operation, dec
 	pand    %xmm1, %xmm2
 	movdqa SHUF_MASK(%rip), %xmm10
-	PSHUFB_XMM %xmm10 ,%xmm2
+	pshufb %xmm10 ,%xmm2
 
 	pxor %xmm2, %xmm8
 .else
 	movdqa SHUF_MASK(%rip), %xmm10
-	PSHUFB_XMM %xmm10,%xmm0
+	pshufb %xmm10,%xmm0
 
 	pxor	%xmm0, %xmm8
 .endif
@@ -408,17 +407,17 @@ _data_read_\@:
 	# GHASH computation for the last <16 byte block
 	movdqa SHUF_MASK(%rip), %xmm10
 	# shuffle xmm0 back to output as ciphertext
-	PSHUFB_XMM %xmm10, %xmm0
+	pshufb %xmm10, %xmm0
 .endif
 
 	# Output %r13 bytes
-	MOVQ_R64_XMM %xmm0, %rax
+	movq %xmm0, %rax
 	cmp $8, %r13
 	jle _less_than_8_bytes_left_\@
 	mov %rax, (%arg3 , %r11, 1)
 	add $8, %r11
 	psrldq $8, %xmm0
-	MOVQ_R64_XMM %xmm0, %rax
+	movq %xmm0, %rax
 	sub $8, %r13
 _less_than_8_bytes_left_\@:
 	mov %al,  (%arg3, %r11, 1)
@@ -449,7 +448,7 @@ _partial_done\@:
 	movd	%r12d, %xmm15		  # len(A) in %xmm15
 	mov InLen(%arg2), %r12
 	shl     $3, %r12                  # len(C) in bits (*128)
-	MOVQ_R64_XMM    %r12, %xmm1
+	movq    %r12, %xmm1
 
 	pslldq	$8, %xmm15		  # %xmm15 = len(A)||0x0000000000000000
 	pxor	%xmm1, %xmm15		  # %xmm15 = len(A)||len(C)
@@ -457,7 +456,7 @@ _partial_done\@:
 	GHASH_MUL	%xmm8, %xmm13, %xmm9, %xmm10, %xmm11, %xmm5, %xmm6
 	# final GHASH computation
 	movdqa SHUF_MASK(%rip), %xmm10
-	PSHUFB_XMM %xmm10, %xmm8
+	pshufb %xmm10, %xmm8
 
 	movdqu OrigIV(%arg2), %xmm0       # %xmm0 = Y0
 	ENCRYPT_SINGLE_BLOCK	%xmm0,  %xmm1	  # E(K, Y0)
@@ -470,7 +469,7 @@ _return_T_\@:
 	cmp	$8, %r11
 	jl	_T_4_\@
 _T_8_\@:
-	MOVQ_R64_XMM	%xmm0, %rax
+	movq	%xmm0, %rax
 	mov	%rax, (%r10)
 	add	$8, %r10
 	sub	$8, %r11
@@ -518,9 +517,9 @@ _return_T_done_\@:
 	pshufd	  $78, \HK, \TMP3
 	pxor	  \GH, \TMP2            # TMP2 = a1+a0
 	pxor	  \HK, \TMP3            # TMP3 = b1+b0
-	PCLMULQDQ 0x11, \HK, \TMP1     # TMP1 = a1*b1
-	PCLMULQDQ 0x00, \HK, \GH       # GH = a0*b0
-	PCLMULQDQ 0x00, \TMP3, \TMP2   # TMP2 = (a0+a1)*(b1+b0)
+	pclmulqdq $0x11, \HK, \TMP1     # TMP1 = a1*b1
+	pclmulqdq $0x00, \HK, \GH       # GH = a0*b0
+	pclmulqdq $0x00, \TMP3, \TMP2   # TMP2 = (a0+a1)*(b1+b0)
 	pxor	  \GH, \TMP2
 	pxor	  \TMP1, \TMP2          # TMP2 = (a0*b0)+(a1*b0)
 	movdqa	  \TMP2, \TMP3
@@ -570,7 +569,7 @@ _return_T_done_\@:
         cmp $8, \DLEN
         jl _read_lt8_\@
         mov (\DPTR), %rax
-        MOVQ_R64_XMM %rax, \XMMDst
+        movq %rax, \XMMDst
         sub $8, \DLEN
         jz _done_read_partial_block_\@
 	xor %eax, %eax
@@ -579,7 +578,7 @@ _read_next_byte_\@:
         mov 7(\DPTR, \DLEN, 1), %al
         dec \DLEN
         jnz _read_next_byte_\@
-        MOVQ_R64_XMM %rax, \XMM1
+        movq %rax, \XMM1
 	pslldq $8, \XMM1
         por \XMM1, \XMMDst
 	jmp _done_read_partial_block_\@
@@ -590,7 +589,7 @@ _read_next_byte_lt8_\@:
         mov -1(\DPTR, \DLEN, 1), %al
         dec \DLEN
         jnz _read_next_byte_lt8_\@
-        MOVQ_R64_XMM %rax, \XMMDst
+        movq %rax, \XMMDst
 _done_read_partial_block_\@:
 .endm
 
@@ -608,7 +607,7 @@ _done_read_partial_block_\@:
 	jl	   _get_AAD_rest\@
 _get_AAD_blocks\@:
 	movdqu	   (%r10), \TMP7
-	PSHUFB_XMM   %xmm14, \TMP7 # byte-reflect the AAD data
+	pshufb	   %xmm14, \TMP7 # byte-reflect the AAD data
 	pxor	   \TMP7, \TMP6
 	GHASH_MUL  \TMP6, \HASHKEY, \TMP1, \TMP2, \TMP3, \TMP4, \TMP5
 	add	   $16, %r10
@@ -624,7 +623,7 @@ _get_AAD_rest\@:
 	je	   _get_AAD_done\@
 
 	READ_PARTIAL_BLOCK %r10, %r11, \TMP1, \TMP7
-	PSHUFB_XMM   %xmm14, \TMP7 # byte-reflect the AAD data
+	pshufb	   %xmm14, \TMP7 # byte-reflect the AAD data
 	pxor	   \TMP6, \TMP7
 	GHASH_MUL  \TMP7, \HASHKEY, \TMP1, \TMP2, \TMP3, \TMP4, \TMP5
 	movdqu \TMP7, \TMP6
@@ -667,7 +666,7 @@ _data_read_\@:				# Finished reading in data
 	# r16-r13 is the number of bytes in plaintext mod 16)
 	add	%r13, %r12
 	movdqu	(%r12), %xmm2		# get the appropriate shuffle mask
-	PSHUFB_XMM %xmm2, %xmm9		# shift right r13 bytes
+	pshufb	%xmm2, %xmm9		# shift right r13 bytes
 
 .ifc \operation, dec
 	movdqa	%xmm1, %xmm3
@@ -689,8 +688,8 @@ _no_extra_mask_1_\@:
 
 	pand	%xmm1, %xmm3
 	movdqa	SHUF_MASK(%rip), %xmm10
-	PSHUFB_XMM	%xmm10, %xmm3
-	PSHUFB_XMM	%xmm2, %xmm3
+	pshufb	%xmm10, %xmm3
+	pshufb	%xmm2, %xmm3
 	pxor	%xmm3, \AAD_HASH
 
 	cmp	$0, %r10
@@ -724,8 +723,8 @@ _no_extra_mask_2_\@:
 	pand	%xmm1, %xmm9
 
 	movdqa	SHUF_MASK(%rip), %xmm1
-	PSHUFB_XMM %xmm1, %xmm9
-	PSHUFB_XMM %xmm2, %xmm9
+	pshufb	%xmm1, %xmm9
+	pshufb	%xmm2, %xmm9
 	pxor	%xmm9, \AAD_HASH
 
 	cmp	$0, %r10
@@ -744,8 +743,8 @@ _encode_done_\@:
 
 	movdqa	SHUF_MASK(%rip), %xmm10
 	# shuffle xmm9 back to output as ciphertext
-	PSHUFB_XMM	%xmm10, %xmm9
-	PSHUFB_XMM	%xmm2, %xmm9
+	pshufb	%xmm10, %xmm9
+	pshufb	%xmm2, %xmm9
 .endif
 	# output encrypted Bytes
 	cmp	$0, %r10
@@ -759,14 +758,14 @@ _partial_fill_\@:
 	mov	\PLAIN_CYPH_LEN, %r13
 _count_set_\@:
 	movdqa	%xmm9, %xmm0
-	MOVQ_R64_XMM	%xmm0, %rax
+	movq	%xmm0, %rax
 	cmp	$8, %r13
 	jle	_less_than_8_bytes_left_\@
 
 	mov	%rax, (\CYPH_PLAIN_OUT, \DATA_OFFSET, 1)
 	add	$8, \DATA_OFFSET
 	psrldq	$8, %xmm0
-	MOVQ_R64_XMM	%xmm0, %rax
+	movq	%xmm0, %rax
 	sub	$8, %r13
 _less_than_8_bytes_left_\@:
 	movb	%al, (\CYPH_PLAIN_OUT, \DATA_OFFSET, 1)
@@ -810,7 +809,7 @@ _partial_block_done_\@:
 .else
 	MOVADQ		\XMM0, %xmm\index
 .endif
-	PSHUFB_XMM	%xmm14, %xmm\index      # perform a 16 byte swap
+	pshufb	%xmm14, %xmm\index      # perform a 16 byte swap
 	pxor		\TMP2, %xmm\index
 .endr
 	lea	0x10(%arg1),%r10
@@ -821,7 +820,7 @@ _partial_block_done_\@:
 aes_loop_initial_\@:
 	MOVADQ	(%r10),\TMP1
 .irpc	index, \i_seq
-	AESENC	\TMP1, %xmm\index
+	aesenc	\TMP1, %xmm\index
 .endr
 	add	$16,%r10
 	sub	$1,%eax
@@ -829,7 +828,7 @@ aes_loop_initial_\@:
 
 	MOVADQ	(%r10), \TMP1
 .irpc index, \i_seq
-	AESENCLAST \TMP1, %xmm\index         # Last Round
+	aesenclast \TMP1, %xmm\index         # Last Round
 .endr
 .irpc index, \i_seq
 	movdqu	   (%arg4 , %r11, 1), \TMP1
@@ -841,7 +840,7 @@ aes_loop_initial_\@:
 .ifc \operation, dec
 	movdqa     \TMP1, %xmm\index
 .endif
-	PSHUFB_XMM	   %xmm14, %xmm\index
+	pshufb	   %xmm14, %xmm\index
 
 		# prepare plaintext/ciphertext for GHASH computation
 .endr
@@ -876,19 +875,19 @@ aes_loop_initial_\@:
 	MOVADQ	   ONE(%RIP),\TMP1
 	paddd	   \TMP1, \XMM0              # INCR Y0
 	MOVADQ	   \XMM0, \XMM1
-	PSHUFB_XMM  %xmm14, \XMM1        # perform a 16 byte swap
+	pshufb  %xmm14, \XMM1        # perform a 16 byte swap
 
 	paddd	   \TMP1, \XMM0              # INCR Y0
 	MOVADQ	   \XMM0, \XMM2
-	PSHUFB_XMM  %xmm14, \XMM2        # perform a 16 byte swap
+	pshufb  %xmm14, \XMM2        # perform a 16 byte swap
 
 	paddd	   \TMP1, \XMM0              # INCR Y0
 	MOVADQ	   \XMM0, \XMM3
-	PSHUFB_XMM %xmm14, \XMM3        # perform a 16 byte swap
+	pshufb %xmm14, \XMM3        # perform a 16 byte swap
 
 	paddd	   \TMP1, \XMM0              # INCR Y0
 	MOVADQ	   \XMM0, \XMM4
-	PSHUFB_XMM %xmm14, \XMM4        # perform a 16 byte swap
+	pshufb %xmm14, \XMM4        # perform a 16 byte swap
 
 	MOVADQ	   0(%arg1),\TMP1
 	pxor	   \TMP1, \XMM1
@@ -897,17 +896,17 @@ aes_loop_initial_\@:
 	pxor	   \TMP1, \XMM4
 .irpc index, 1234 # do 4 rounds
 	movaps 0x10*\index(%arg1), \TMP1
-	AESENC	   \TMP1, \XMM1
-	AESENC	   \TMP1, \XMM2
-	AESENC	   \TMP1, \XMM3
-	AESENC	   \TMP1, \XMM4
+	aesenc	   \TMP1, \XMM1
+	aesenc	   \TMP1, \XMM2
+	aesenc	   \TMP1, \XMM3
+	aesenc	   \TMP1, \XMM4
 .endr
 .irpc index, 56789 # do next 5 rounds
 	movaps 0x10*\index(%arg1), \TMP1
-	AESENC	   \TMP1, \XMM1
-	AESENC	   \TMP1, \XMM2
-	AESENC	   \TMP1, \XMM3
-	AESENC	   \TMP1, \XMM4
+	aesenc	   \TMP1, \XMM1
+	aesenc	   \TMP1, \XMM2
+	aesenc	   \TMP1, \XMM3
+	aesenc	   \TMP1, \XMM4
 .endr
 	lea	   0xa0(%arg1),%r10
 	mov	   keysize,%eax
@@ -918,7 +917,7 @@ aes_loop_initial_\@:
 aes_loop_pre_\@:
 	MOVADQ	   (%r10),\TMP2
 .irpc	index, 1234
-	AESENC	   \TMP2, %xmm\index
+	aesenc	   \TMP2, %xmm\index
 .endr
 	add	   $16,%r10
 	sub	   $1,%eax
@@ -926,10 +925,10 @@ aes_loop_pre_\@:
 
 aes_loop_pre_done\@:
 	MOVADQ	   (%r10), \TMP2
-	AESENCLAST \TMP2, \XMM1
-	AESENCLAST \TMP2, \XMM2
-	AESENCLAST \TMP2, \XMM3
-	AESENCLAST \TMP2, \XMM4
+	aesenclast \TMP2, \XMM1
+	aesenclast \TMP2, \XMM2
+	aesenclast \TMP2, \XMM3
+	aesenclast \TMP2, \XMM4
 	movdqu	   16*0(%arg4 , %r11 , 1), \TMP1
 	pxor	   \TMP1, \XMM1
 .ifc \operation, dec
@@ -961,12 +960,12 @@ aes_loop_pre_done\@:
 .endif
 
 	add	   $64, %r11
-	PSHUFB_XMM %xmm14, \XMM1 # perform a 16 byte swap
+	pshufb %xmm14, \XMM1 # perform a 16 byte swap
 	pxor	   \XMMDst, \XMM1
 # combine GHASHed value with the corresponding ciphertext
-	PSHUFB_XMM %xmm14, \XMM2 # perform a 16 byte swap
-	PSHUFB_XMM %xmm14, \XMM3 # perform a 16 byte swap
-	PSHUFB_XMM %xmm14, \XMM4 # perform a 16 byte swap
+	pshufb %xmm14, \XMM2 # perform a 16 byte swap
+	pshufb %xmm14, \XMM3 # perform a 16 byte swap
+	pshufb %xmm14, \XMM4 # perform a 16 byte swap
 
 _initial_blocks_done\@:
 
@@ -978,7 +977,7 @@ _initial_blocks_done\@:
 * arg1, %arg3, %arg4 are used as pointers only, not modified
 * %r11 is the data offset value
 */
-.macro GHASH_4_ENCRYPT_4_PARALLEL_ENC TMP1 TMP2 TMP3 TMP4 TMP5 \
+.macro GHASH_4_ENCRYPT_4_PARALLEL_enc TMP1 TMP2 TMP3 TMP4 TMP5 \
 TMP6 XMM0 XMM1 XMM2 XMM3 XMM4 XMM5 XMM6 XMM7 XMM8 operation
 
 	movdqa	  \XMM1, \XMM5
@@ -994,7 +993,7 @@ TMP6 XMM0 XMM1 XMM2 XMM3 XMM4 XMM5 XMM6 XMM7 XMM8 operation
 	pxor	  \XMM5, \TMP6
 	paddd     ONE(%rip), \XMM0		# INCR CNT
 	movdqu	  HashKey_4(%arg2), \TMP5
-	PCLMULQDQ 0x11, \TMP5, \TMP4           # TMP4 = a1*b1
+	pclmulqdq $0x11, \TMP5, \TMP4           # TMP4 = a1*b1
 	movdqa    \XMM0, \XMM1
 	paddd     ONE(%rip), \XMM0		# INCR CNT
 	movdqa    \XMM0, \XMM2
@@ -1002,51 +1001,51 @@ TMP6 XMM0 XMM1 XMM2 XMM3 XMM4 XMM5 XMM6 XMM7 XMM8 operation
 	movdqa    \XMM0, \XMM3
 	paddd     ONE(%rip), \XMM0		# INCR CNT
 	movdqa    \XMM0, \XMM4
-	PSHUFB_XMM %xmm15, \XMM1	# perform a 16 byte swap
-	PCLMULQDQ 0x00, \TMP5, \XMM5           # XMM5 = a0*b0
-	PSHUFB_XMM %xmm15, \XMM2	# perform a 16 byte swap
-	PSHUFB_XMM %xmm15, \XMM3	# perform a 16 byte swap
-	PSHUFB_XMM %xmm15, \XMM4	# perform a 16 byte swap
+	pshufb %xmm15, \XMM1	# perform a 16 byte swap
+	pclmulqdq $0x00, \TMP5, \XMM5           # XMM5 = a0*b0
+	pshufb %xmm15, \XMM2	# perform a 16 byte swap
+	pshufb %xmm15, \XMM3	# perform a 16 byte swap
+	pshufb %xmm15, \XMM4	# perform a 16 byte swap
 
 	pxor	  (%arg1), \XMM1
 	pxor	  (%arg1), \XMM2
 	pxor	  (%arg1), \XMM3
 	pxor	  (%arg1), \XMM4
 	movdqu	  HashKey_4_k(%arg2), \TMP5
-	PCLMULQDQ 0x00, \TMP5, \TMP6           # TMP6 = (a1+a0)*(b1+b0)
+	pclmulqdq $0x00, \TMP5, \TMP6       # TMP6 = (a1+a0)*(b1+b0)
 	movaps 0x10(%arg1), \TMP1
-	AESENC	  \TMP1, \XMM1              # Round 1
-	AESENC	  \TMP1, \XMM2
-	AESENC	  \TMP1, \XMM3
-	AESENC	  \TMP1, \XMM4
+	aesenc	  \TMP1, \XMM1              # Round 1
+	aesenc	  \TMP1, \XMM2
+	aesenc	  \TMP1, \XMM3
+	aesenc	  \TMP1, \XMM4
 	movaps 0x20(%arg1), \TMP1
-	AESENC	  \TMP1, \XMM1              # Round 2
-	AESENC	  \TMP1, \XMM2
-	AESENC	  \TMP1, \XMM3
-	AESENC	  \TMP1, \XMM4
+	aesenc	  \TMP1, \XMM1              # Round 2
+	aesenc	  \TMP1, \XMM2
+	aesenc	  \TMP1, \XMM3
+	aesenc	  \TMP1, \XMM4
 	movdqa	  \XMM6, \TMP1
 	pshufd	  $78, \XMM6, \TMP2
 	pxor	  \XMM6, \TMP2
 	movdqu	  HashKey_3(%arg2), \TMP5
-	PCLMULQDQ 0x11, \TMP5, \TMP1           # TMP1 = a1 * b1
+	pclmulqdq $0x11, \TMP5, \TMP1       # TMP1 = a1 * b1
 	movaps 0x30(%arg1), \TMP3
-	AESENC    \TMP3, \XMM1              # Round 3
-	AESENC    \TMP3, \XMM2
-	AESENC    \TMP3, \XMM3
-	AESENC    \TMP3, \XMM4
-	PCLMULQDQ 0x00, \TMP5, \XMM6           # XMM6 = a0*b0
+	aesenc    \TMP3, \XMM1              # Round 3
+	aesenc    \TMP3, \XMM2
+	aesenc    \TMP3, \XMM3
+	aesenc    \TMP3, \XMM4
+	pclmulqdq $0x00, \TMP5, \XMM6       # XMM6 = a0*b0
 	movaps 0x40(%arg1), \TMP3
-	AESENC	  \TMP3, \XMM1              # Round 4
-	AESENC	  \TMP3, \XMM2
-	AESENC	  \TMP3, \XMM3
-	AESENC	  \TMP3, \XMM4
+	aesenc	  \TMP3, \XMM1              # Round 4
+	aesenc	  \TMP3, \XMM2
+	aesenc	  \TMP3, \XMM3
+	aesenc	  \TMP3, \XMM4
 	movdqu	  HashKey_3_k(%arg2), \TMP5
-	PCLMULQDQ 0x00, \TMP5, \TMP2           # TMP2 = (a1+a0)*(b1+b0)
+	pclmulqdq $0x00, \TMP5, \TMP2       # TMP2 = (a1+a0)*(b1+b0)
 	movaps 0x50(%arg1), \TMP3
-	AESENC	  \TMP3, \XMM1              # Round 5
-	AESENC	  \TMP3, \XMM2
-	AESENC	  \TMP3, \XMM3
-	AESENC	  \TMP3, \XMM4
+	aesenc	  \TMP3, \XMM1              # Round 5
+	aesenc	  \TMP3, \XMM2
+	aesenc	  \TMP3, \XMM3
+	aesenc	  \TMP3, \XMM4
 	pxor	  \TMP1, \TMP4
 # accumulate the results in TMP4:XMM5, TMP6 holds the middle part
 	pxor	  \XMM6, \XMM5
@@ -1058,25 +1057,25 @@ TMP6 XMM0 XMM1 XMM2 XMM3 XMM4 XMM5 XMM6 XMM7 XMM8 operation
 
         # Multiply TMP5 * HashKey using karatsuba
 
-	PCLMULQDQ 0x11, \TMP5, \TMP1           # TMP1 = a1*b1
+	pclmulqdq $0x11, \TMP5, \TMP1       # TMP1 = a1*b1
 	movaps 0x60(%arg1), \TMP3
-	AESENC	  \TMP3, \XMM1              # Round 6
-	AESENC	  \TMP3, \XMM2
-	AESENC	  \TMP3, \XMM3
-	AESENC	  \TMP3, \XMM4
-	PCLMULQDQ 0x00, \TMP5, \XMM7           # XMM7 = a0*b0
+	aesenc	  \TMP3, \XMM1              # Round 6
+	aesenc	  \TMP3, \XMM2
+	aesenc	  \TMP3, \XMM3
+	aesenc	  \TMP3, \XMM4
+	pclmulqdq $0x00, \TMP5, \XMM7       # XMM7 = a0*b0
 	movaps 0x70(%arg1), \TMP3
-	AESENC	  \TMP3, \XMM1             # Round 7
-	AESENC	  \TMP3, \XMM2
-	AESENC	  \TMP3, \XMM3
-	AESENC	  \TMP3, \XMM4
+	aesenc	  \TMP3, \XMM1              # Round 7
+	aesenc	  \TMP3, \XMM2
+	aesenc	  \TMP3, \XMM3
+	aesenc	  \TMP3, \XMM4
 	movdqu	  HashKey_2_k(%arg2), \TMP5
-	PCLMULQDQ 0x00, \TMP5, \TMP2           # TMP2 = (a1+a0)*(b1+b0)
+	pclmulqdq $0x00, \TMP5, \TMP2       # TMP2 = (a1+a0)*(b1+b0)
 	movaps 0x80(%arg1), \TMP3
-	AESENC	  \TMP3, \XMM1             # Round 8
-	AESENC	  \TMP3, \XMM2
-	AESENC	  \TMP3, \XMM3
-	AESENC	  \TMP3, \XMM4
+	aesenc	  \TMP3, \XMM1              # Round 8
+	aesenc	  \TMP3, \XMM2
+	aesenc	  \TMP3, \XMM3
+	aesenc	  \TMP3, \XMM4
 	pxor	  \TMP1, \TMP4
 # accumulate the results in TMP4:XMM5, TMP6 holds the middle part
 	pxor	  \XMM7, \XMM5
@@ -1089,13 +1088,13 @@ TMP6 XMM0 XMM1 XMM2 XMM3 XMM4 XMM5 XMM6 XMM7 XMM8 operation
 	pshufd	  $78, \XMM8, \TMP2
 	pxor	  \XMM8, \TMP2
 	movdqu	  HashKey(%arg2), \TMP5
-	PCLMULQDQ 0x11, \TMP5, \TMP1          # TMP1 = a1*b1
+	pclmulqdq $0x11, \TMP5, \TMP1      # TMP1 = a1*b1
 	movaps 0x90(%arg1), \TMP3
-	AESENC	  \TMP3, \XMM1            # Round 9
-	AESENC	  \TMP3, \XMM2
-	AESENC	  \TMP3, \XMM3
-	AESENC	  \TMP3, \XMM4
-	PCLMULQDQ 0x00, \TMP5, \XMM8          # XMM8 = a0*b0
+	aesenc	  \TMP3, \XMM1             # Round 9
+	aesenc	  \TMP3, \XMM2
+	aesenc	  \TMP3, \XMM3
+	aesenc	  \TMP3, \XMM4
+	pclmulqdq $0x00, \TMP5, \XMM8      # XMM8 = a0*b0
 	lea	  0xa0(%arg1),%r10
 	mov	  keysize,%eax
 	shr	  $2,%eax			# 128->4, 192->6, 256->8
@@ -1105,7 +1104,7 @@ TMP6 XMM0 XMM1 XMM2 XMM3 XMM4 XMM5 XMM6 XMM7 XMM8 operation
 aes_loop_par_enc\@:
 	MOVADQ	  (%r10),\TMP3
 .irpc	index, 1234
-	AESENC	  \TMP3, %xmm\index
+	aesenc	  \TMP3, %xmm\index
 .endr
 	add	  $16,%r10
 	sub	  $1,%eax
@@ -1113,12 +1112,12 @@ aes_loop_par_enc\@:
 
 aes_loop_par_enc_done\@:
 	MOVADQ	  (%r10), \TMP3
-	AESENCLAST \TMP3, \XMM1           # Round 10
-	AESENCLAST \TMP3, \XMM2
-	AESENCLAST \TMP3, \XMM3
-	AESENCLAST \TMP3, \XMM4
+	aesenclast \TMP3, \XMM1           # Round 10
+	aesenclast \TMP3, \XMM2
+	aesenclast \TMP3, \XMM3
+	aesenclast \TMP3, \XMM4
 	movdqu    HashKey_k(%arg2), \TMP5
-	PCLMULQDQ 0x00, \TMP5, \TMP2          # TMP2 = (a1+a0)*(b1+b0)
+	pclmulqdq $0x00, \TMP5, \TMP2          # TMP2 = (a1+a0)*(b1+b0)
 	movdqu	  (%arg4,%r11,1), \TMP3
 	pxor	  \TMP3, \XMM1                 # Ciphertext/Plaintext XOR EK
 	movdqu	  16(%arg4,%r11,1), \TMP3
@@ -1131,10 +1130,10 @@ aes_loop_par_enc_done\@:
         movdqu    \XMM2, 16(%arg3,%r11,1)      # Write to the ciphertext buffer
         movdqu    \XMM3, 32(%arg3,%r11,1)      # Write to the ciphertext buffer
         movdqu    \XMM4, 48(%arg3,%r11,1)      # Write to the ciphertext buffer
-	PSHUFB_XMM %xmm15, \XMM1        # perform a 16 byte swap
-	PSHUFB_XMM %xmm15, \XMM2	# perform a 16 byte swap
-	PSHUFB_XMM %xmm15, \XMM3	# perform a 16 byte swap
-	PSHUFB_XMM %xmm15, \XMM4	# perform a 16 byte swap
+	pshufb %xmm15, \XMM1        # perform a 16 byte swap
+	pshufb %xmm15, \XMM2	# perform a 16 byte swap
+	pshufb %xmm15, \XMM3	# perform a 16 byte swap
+	pshufb %xmm15, \XMM4	# perform a 16 byte swap
 
 	pxor	  \TMP4, \TMP1
 	pxor	  \XMM8, \XMM5
@@ -1186,7 +1185,7 @@ aes_loop_par_enc_done\@:
 * arg1, %arg3, %arg4 are used as pointers only, not modified
 * %r11 is the data offset value
 */
-.macro GHASH_4_ENCRYPT_4_PARALLEL_DEC TMP1 TMP2 TMP3 TMP4 TMP5 \
+.macro GHASH_4_ENCRYPT_4_PARALLEL_dec TMP1 TMP2 TMP3 TMP4 TMP5 \
 TMP6 XMM0 XMM1 XMM2 XMM3 XMM4 XMM5 XMM6 XMM7 XMM8 operation
 
 	movdqa	  \XMM1, \XMM5
@@ -1202,7 +1201,7 @@ TMP6 XMM0 XMM1 XMM2 XMM3 XMM4 XMM5 XMM6 XMM7 XMM8 operation
 	pxor	  \XMM5, \TMP6
 	paddd     ONE(%rip), \XMM0		# INCR CNT
 	movdqu	  HashKey_4(%arg2), \TMP5
-	PCLMULQDQ 0x11, \TMP5, \TMP4           # TMP4 = a1*b1
+	pclmulqdq $0x11, \TMP5, \TMP4           # TMP4 = a1*b1
 	movdqa    \XMM0, \XMM1
 	paddd     ONE(%rip), \XMM0		# INCR CNT
 	movdqa    \XMM0, \XMM2
@@ -1210,51 +1209,51 @@ TMP6 XMM0 XMM1 XMM2 XMM3 XMM4 XMM5 XMM6 XMM7 XMM8 operation
 	movdqa    \XMM0, \XMM3
 	paddd     ONE(%rip), \XMM0		# INCR CNT
 	movdqa    \XMM0, \XMM4
-	PSHUFB_XMM %xmm15, \XMM1	# perform a 16 byte swap
-	PCLMULQDQ 0x00, \TMP5, \XMM5           # XMM5 = a0*b0
-	PSHUFB_XMM %xmm15, \XMM2	# perform a 16 byte swap
-	PSHUFB_XMM %xmm15, \XMM3	# perform a 16 byte swap
-	PSHUFB_XMM %xmm15, \XMM4	# perform a 16 byte swap
+	pshufb %xmm15, \XMM1	# perform a 16 byte swap
+	pclmulqdq $0x00, \TMP5, \XMM5           # XMM5 = a0*b0
+	pshufb %xmm15, \XMM2	# perform a 16 byte swap
+	pshufb %xmm15, \XMM3	# perform a 16 byte swap
+	pshufb %xmm15, \XMM4	# perform a 16 byte swap
 
 	pxor	  (%arg1), \XMM1
 	pxor	  (%arg1), \XMM2
 	pxor	  (%arg1), \XMM3
 	pxor	  (%arg1), \XMM4
 	movdqu	  HashKey_4_k(%arg2), \TMP5
-	PCLMULQDQ 0x00, \TMP5, \TMP6           # TMP6 = (a1+a0)*(b1+b0)
+	pclmulqdq $0x00, \TMP5, \TMP6       # TMP6 = (a1+a0)*(b1+b0)
 	movaps 0x10(%arg1), \TMP1
-	AESENC	  \TMP1, \XMM1              # Round 1
-	AESENC	  \TMP1, \XMM2
-	AESENC	  \TMP1, \XMM3
-	AESENC	  \TMP1, \XMM4
+	aesenc	  \TMP1, \XMM1              # Round 1
+	aesenc	  \TMP1, \XMM2
+	aesenc	  \TMP1, \XMM3
+	aesenc	  \TMP1, \XMM4
 	movaps 0x20(%arg1), \TMP1
-	AESENC	  \TMP1, \XMM1              # Round 2
-	AESENC	  \TMP1, \XMM2
-	AESENC	  \TMP1, \XMM3
-	AESENC	  \TMP1, \XMM4
+	aesenc	  \TMP1, \XMM1              # Round 2
+	aesenc	  \TMP1, \XMM2
+	aesenc	  \TMP1, \XMM3
+	aesenc	  \TMP1, \XMM4
 	movdqa	  \XMM6, \TMP1
 	pshufd	  $78, \XMM6, \TMP2
 	pxor	  \XMM6, \TMP2
 	movdqu	  HashKey_3(%arg2), \TMP5
-	PCLMULQDQ 0x11, \TMP5, \TMP1           # TMP1 = a1 * b1
+	pclmulqdq $0x11, \TMP5, \TMP1       # TMP1 = a1 * b1
 	movaps 0x30(%arg1), \TMP3
-	AESENC    \TMP3, \XMM1              # Round 3
-	AESENC    \TMP3, \XMM2
-	AESENC    \TMP3, \XMM3
-	AESENC    \TMP3, \XMM4
-	PCLMULQDQ 0x00, \TMP5, \XMM6           # XMM6 = a0*b0
+	aesenc    \TMP3, \XMM1              # Round 3
+	aesenc    \TMP3, \XMM2
+	aesenc    \TMP3, \XMM3
+	aesenc    \TMP3, \XMM4
+	pclmulqdq $0x00, \TMP5, \XMM6       # XMM6 = a0*b0
 	movaps 0x40(%arg1), \TMP3
-	AESENC	  \TMP3, \XMM1              # Round 4
-	AESENC	  \TMP3, \XMM2
-	AESENC	  \TMP3, \XMM3
-	AESENC	  \TMP3, \XMM4
+	aesenc	  \TMP3, \XMM1              # Round 4
+	aesenc	  \TMP3, \XMM2
+	aesenc	  \TMP3, \XMM3
+	aesenc	  \TMP3, \XMM4
 	movdqu	  HashKey_3_k(%arg2), \TMP5
-	PCLMULQDQ 0x00, \TMP5, \TMP2           # TMP2 = (a1+a0)*(b1+b0)
+	pclmulqdq $0x00, \TMP5, \TMP2       # TMP2 = (a1+a0)*(b1+b0)
 	movaps 0x50(%arg1), \TMP3
-	AESENC	  \TMP3, \XMM1              # Round 5
-	AESENC	  \TMP3, \XMM2
-	AESENC	  \TMP3, \XMM3
-	AESENC	  \TMP3, \XMM4
+	aesenc	  \TMP3, \XMM1              # Round 5
+	aesenc	  \TMP3, \XMM2
+	aesenc	  \TMP3, \XMM3
+	aesenc	  \TMP3, \XMM4
 	pxor	  \TMP1, \TMP4
 # accumulate the results in TMP4:XMM5, TMP6 holds the middle part
 	pxor	  \XMM6, \XMM5
@@ -1266,25 +1265,25 @@ TMP6 XMM0 XMM1 XMM2 XMM3 XMM4 XMM5 XMM6 XMM7 XMM8 operation
 
         # Multiply TMP5 * HashKey using karatsuba
 
-	PCLMULQDQ 0x11, \TMP5, \TMP1           # TMP1 = a1*b1
+	pclmulqdq $0x11, \TMP5, \TMP1       # TMP1 = a1*b1
 	movaps 0x60(%arg1), \TMP3
-	AESENC	  \TMP3, \XMM1              # Round 6
-	AESENC	  \TMP3, \XMM2
-	AESENC	  \TMP3, \XMM3
-	AESENC	  \TMP3, \XMM4
-	PCLMULQDQ 0x00, \TMP5, \XMM7           # XMM7 = a0*b0
+	aesenc	  \TMP3, \XMM1              # Round 6
+	aesenc	  \TMP3, \XMM2
+	aesenc	  \TMP3, \XMM3
+	aesenc	  \TMP3, \XMM4
+	pclmulqdq $0x00, \TMP5, \XMM7       # XMM7 = a0*b0
 	movaps 0x70(%arg1), \TMP3
-	AESENC	  \TMP3, \XMM1             # Round 7
-	AESENC	  \TMP3, \XMM2
-	AESENC	  \TMP3, \XMM3
-	AESENC	  \TMP3, \XMM4
+	aesenc	  \TMP3, \XMM1              # Round 7
+	aesenc	  \TMP3, \XMM2
+	aesenc	  \TMP3, \XMM3
+	aesenc	  \TMP3, \XMM4
 	movdqu	  HashKey_2_k(%arg2), \TMP5
-	PCLMULQDQ 0x00, \TMP5, \TMP2           # TMP2 = (a1+a0)*(b1+b0)
+	pclmulqdq $0x00, \TMP5, \TMP2       # TMP2 = (a1+a0)*(b1+b0)
 	movaps 0x80(%arg1), \TMP3
-	AESENC	  \TMP3, \XMM1             # Round 8
-	AESENC	  \TMP3, \XMM2
-	AESENC	  \TMP3, \XMM3
-	AESENC	  \TMP3, \XMM4
+	aesenc	  \TMP3, \XMM1              # Round 8
+	aesenc	  \TMP3, \XMM2
+	aesenc	  \TMP3, \XMM3
+	aesenc	  \TMP3, \XMM4
 	pxor	  \TMP1, \TMP4
 # accumulate the results in TMP4:XMM5, TMP6 holds the middle part
 	pxor	  \XMM7, \XMM5
@@ -1297,13 +1296,13 @@ TMP6 XMM0 XMM1 XMM2 XMM3 XMM4 XMM5 XMM6 XMM7 XMM8 operation
 	pshufd	  $78, \XMM8, \TMP2
 	pxor	  \XMM8, \TMP2
 	movdqu	  HashKey(%arg2), \TMP5
-	PCLMULQDQ 0x11, \TMP5, \TMP1          # TMP1 = a1*b1
+	pclmulqdq $0x11, \TMP5, \TMP1      # TMP1 = a1*b1
 	movaps 0x90(%arg1), \TMP3
-	AESENC	  \TMP3, \XMM1            # Round 9
-	AESENC	  \TMP3, \XMM2
-	AESENC	  \TMP3, \XMM3
-	AESENC	  \TMP3, \XMM4
-	PCLMULQDQ 0x00, \TMP5, \XMM8          # XMM8 = a0*b0
+	aesenc	  \TMP3, \XMM1             # Round 9
+	aesenc	  \TMP3, \XMM2
+	aesenc	  \TMP3, \XMM3
+	aesenc	  \TMP3, \XMM4
+	pclmulqdq $0x00, \TMP5, \XMM8      # XMM8 = a0*b0
 	lea	  0xa0(%arg1),%r10
 	mov	  keysize,%eax
 	shr	  $2,%eax		        # 128->4, 192->6, 256->8
@@ -1313,7 +1312,7 @@ TMP6 XMM0 XMM1 XMM2 XMM3 XMM4 XMM5 XMM6 XMM7 XMM8 operation
 aes_loop_par_dec\@:
 	MOVADQ	  (%r10),\TMP3
 .irpc	index, 1234
-	AESENC	  \TMP3, %xmm\index
+	aesenc	  \TMP3, %xmm\index
 .endr
 	add	  $16,%r10
 	sub	  $1,%eax
@@ -1321,12 +1320,12 @@ aes_loop_par_dec\@:
 
 aes_loop_par_dec_done\@:
 	MOVADQ	  (%r10), \TMP3
-	AESENCLAST \TMP3, \XMM1           # last round
-	AESENCLAST \TMP3, \XMM2
-	AESENCLAST \TMP3, \XMM3
-	AESENCLAST \TMP3, \XMM4
+	aesenclast \TMP3, \XMM1           # last round
+	aesenclast \TMP3, \XMM2
+	aesenclast \TMP3, \XMM3
+	aesenclast \TMP3, \XMM4
 	movdqu    HashKey_k(%arg2), \TMP5
-	PCLMULQDQ 0x00, \TMP5, \TMP2          # TMP2 = (a1+a0)*(b1+b0)
+	pclmulqdq $0x00, \TMP5, \TMP2          # TMP2 = (a1+a0)*(b1+b0)
 	movdqu	  (%arg4,%r11,1), \TMP3
 	pxor	  \TMP3, \XMM1                 # Ciphertext/Plaintext XOR EK
 	movdqu	  \XMM1, (%arg3,%r11,1)        # Write to plaintext buffer
@@ -1343,10 +1342,10 @@ aes_loop_par_dec_done\@:
 	pxor	  \TMP3, \XMM4                 # Ciphertext/Plaintext XOR EK
 	movdqu	  \XMM4, 48(%arg3,%r11,1)      # Write to plaintext buffer
 	movdqa    \TMP3, \XMM4
-	PSHUFB_XMM %xmm15, \XMM1        # perform a 16 byte swap
-	PSHUFB_XMM %xmm15, \XMM2	# perform a 16 byte swap
-	PSHUFB_XMM %xmm15, \XMM3	# perform a 16 byte swap
-	PSHUFB_XMM %xmm15, \XMM4	# perform a 16 byte swap
+	pshufb %xmm15, \XMM1        # perform a 16 byte swap
+	pshufb %xmm15, \XMM2	# perform a 16 byte swap
+	pshufb %xmm15, \XMM3	# perform a 16 byte swap
+	pshufb %xmm15, \XMM4	# perform a 16 byte swap
 
 	pxor	  \TMP4, \TMP1
 	pxor	  \XMM8, \XMM5
@@ -1402,10 +1401,10 @@ TMP7 XMM1 XMM2 XMM3 XMM4 XMMDst
 	pshufd	  $78, \XMM1, \TMP2
 	pxor	  \XMM1, \TMP2
 	movdqu	  HashKey_4(%arg2), \TMP5
-	PCLMULQDQ 0x11, \TMP5, \TMP6       # TMP6 = a1*b1
-	PCLMULQDQ 0x00, \TMP5, \XMM1       # XMM1 = a0*b0
+	pclmulqdq $0x11, \TMP5, \TMP6       # TMP6 = a1*b1
+	pclmulqdq $0x00, \TMP5, \XMM1       # XMM1 = a0*b0
 	movdqu	  HashKey_4_k(%arg2), \TMP4
-	PCLMULQDQ 0x00, \TMP4, \TMP2       # TMP2 = (a1+a0)*(b1+b0)
+	pclmulqdq $0x00, \TMP4, \TMP2       # TMP2 = (a1+a0)*(b1+b0)
 	movdqa	  \XMM1, \XMMDst
 	movdqa	  \TMP2, \XMM1              # result in TMP6, XMMDst, XMM1
 
@@ -1415,10 +1414,10 @@ TMP7 XMM1 XMM2 XMM3 XMM4 XMMDst
 	pshufd	  $78, \XMM2, \TMP2
 	pxor	  \XMM2, \TMP2
 	movdqu	  HashKey_3(%arg2), \TMP5
-	PCLMULQDQ 0x11, \TMP5, \TMP1       # TMP1 = a1*b1
-	PCLMULQDQ 0x00, \TMP5, \XMM2       # XMM2 = a0*b0
+	pclmulqdq $0x11, \TMP5, \TMP1       # TMP1 = a1*b1
+	pclmulqdq $0x00, \TMP5, \XMM2       # XMM2 = a0*b0
 	movdqu	  HashKey_3_k(%arg2), \TMP4
-	PCLMULQDQ 0x00, \TMP4, \TMP2       # TMP2 = (a1+a0)*(b1+b0)
+	pclmulqdq $0x00, \TMP4, \TMP2       # TMP2 = (a1+a0)*(b1+b0)
 	pxor	  \TMP1, \TMP6
 	pxor	  \XMM2, \XMMDst
 	pxor	  \TMP2, \XMM1
@@ -1430,10 +1429,10 @@ TMP7 XMM1 XMM2 XMM3 XMM4 XMMDst
 	pshufd	  $78, \XMM3, \TMP2
 	pxor	  \XMM3, \TMP2
 	movdqu	  HashKey_2(%arg2), \TMP5
-	PCLMULQDQ 0x11, \TMP5, \TMP1       # TMP1 = a1*b1
-	PCLMULQDQ 0x00, \TMP5, \XMM3       # XMM3 = a0*b0
+	pclmulqdq $0x11, \TMP5, \TMP1       # TMP1 = a1*b1
+	pclmulqdq $0x00, \TMP5, \XMM3       # XMM3 = a0*b0
 	movdqu	  HashKey_2_k(%arg2), \TMP4
-	PCLMULQDQ 0x00, \TMP4, \TMP2       # TMP2 = (a1+a0)*(b1+b0)
+	pclmulqdq $0x00, \TMP4, \TMP2       # TMP2 = (a1+a0)*(b1+b0)
 	pxor	  \TMP1, \TMP6
 	pxor	  \XMM3, \XMMDst
 	pxor	  \TMP2, \XMM1   # results accumulated in TMP6, XMMDst, XMM1
@@ -1443,10 +1442,10 @@ TMP7 XMM1 XMM2 XMM3 XMM4 XMMDst
 	pshufd	  $78, \XMM4, \TMP2
 	pxor	  \XMM4, \TMP2
 	movdqu	  HashKey(%arg2), \TMP5
-	PCLMULQDQ 0x11, \TMP5, \TMP1	    # TMP1 = a1*b1
-	PCLMULQDQ 0x00, \TMP5, \XMM4       # XMM4 = a0*b0
+	pclmulqdq $0x11, \TMP5, \TMP1	    # TMP1 = a1*b1
+	pclmulqdq $0x00, \TMP5, \XMM4       # XMM4 = a0*b0
 	movdqu	  HashKey_k(%arg2), \TMP4
-	PCLMULQDQ 0x00, \TMP4, \TMP2       # TMP2 = (a1+a0)*(b1+b0)
+	pclmulqdq $0x00, \TMP4, \TMP2       # TMP2 = (a1+a0)*(b1+b0)
 	pxor	  \TMP1, \TMP6
 	pxor	  \XMM4, \XMMDst
 	pxor	  \XMM1, \TMP2
@@ -1504,13 +1503,13 @@ TMP7 XMM1 XMM2 XMM3 XMM4 XMMDst
 
 _esb_loop_\@:
 	MOVADQ		(%r10),\TMP1
-	AESENC		\TMP1,\XMM0
+	aesenc		\TMP1,\XMM0
 	add		$16,%r10
 	sub		$1,%eax
 	jnz		_esb_loop_\@
 
 	MOVADQ		(%r10),\TMP1
-	AESENCLAST	\TMP1,\XMM0
+	aesenclast	\TMP1,\XMM0
 .endm
 /*****************************************************************************
 * void aesni_gcm_dec(void *aes_ctx,    // AES Key schedule. Starts on a 16 byte boundary.
@@ -1849,72 +1848,72 @@ SYM_FUNC_START(aesni_set_key)
 	movups 0x10(UKEYP), %xmm2	# other user key
 	movaps %xmm2, (TKEYP)
 	add $0x10, TKEYP
-	AESKEYGENASSIST 0x1 %xmm2 %xmm1		# round 1
+	aeskeygenassist $0x1, %xmm2, %xmm1	# round 1
 	call _key_expansion_256a
-	AESKEYGENASSIST 0x1 %xmm0 %xmm1
+	aeskeygenassist $0x1, %xmm0, %xmm1
 	call _key_expansion_256b
-	AESKEYGENASSIST 0x2 %xmm2 %xmm1		# round 2
+	aeskeygenassist $0x2, %xmm2, %xmm1	# round 2
 	call _key_expansion_256a
-	AESKEYGENASSIST 0x2 %xmm0 %xmm1
+	aeskeygenassist $0x2, %xmm0, %xmm1
 	call _key_expansion_256b
-	AESKEYGENASSIST 0x4 %xmm2 %xmm1		# round 3
+	aeskeygenassist $0x4, %xmm2, %xmm1	# round 3
 	call _key_expansion_256a
-	AESKEYGENASSIST 0x4 %xmm0 %xmm1
+	aeskeygenassist $0x4, %xmm0, %xmm1
 	call _key_expansion_256b
-	AESKEYGENASSIST 0x8 %xmm2 %xmm1		# round 4
+	aeskeygenassist $0x8, %xmm2, %xmm1	# round 4
 	call _key_expansion_256a
-	AESKEYGENASSIST 0x8 %xmm0 %xmm1
+	aeskeygenassist $0x8, %xmm0, %xmm1
 	call _key_expansion_256b
-	AESKEYGENASSIST 0x10 %xmm2 %xmm1	# round 5
+	aeskeygenassist $0x10, %xmm2, %xmm1	# round 5
 	call _key_expansion_256a
-	AESKEYGENASSIST 0x10 %xmm0 %xmm1
+	aeskeygenassist $0x10, %xmm0, %xmm1
 	call _key_expansion_256b
-	AESKEYGENASSIST 0x20 %xmm2 %xmm1	# round 6
+	aeskeygenassist $0x20, %xmm2, %xmm1	# round 6
 	call _key_expansion_256a
-	AESKEYGENASSIST 0x20 %xmm0 %xmm1
+	aeskeygenassist $0x20, %xmm0, %xmm1
 	call _key_expansion_256b
-	AESKEYGENASSIST 0x40 %xmm2 %xmm1	# round 7
+	aeskeygenassist $0x40, %xmm2, %xmm1	# round 7
 	call _key_expansion_256a
 	jmp .Ldec_key
 .Lenc_key192:
 	movq 0x10(UKEYP), %xmm2		# other user key
-	AESKEYGENASSIST 0x1 %xmm2 %xmm1		# round 1
+	aeskeygenassist $0x1, %xmm2, %xmm1	# round 1
 	call _key_expansion_192a
-	AESKEYGENASSIST 0x2 %xmm2 %xmm1		# round 2
+	aeskeygenassist $0x2, %xmm2, %xmm1	# round 2
 	call _key_expansion_192b
-	AESKEYGENASSIST 0x4 %xmm2 %xmm1		# round 3
+	aeskeygenassist $0x4, %xmm2, %xmm1	# round 3
 	call _key_expansion_192a
-	AESKEYGENASSIST 0x8 %xmm2 %xmm1		# round 4
+	aeskeygenassist $0x8, %xmm2, %xmm1	# round 4
 	call _key_expansion_192b
-	AESKEYGENASSIST 0x10 %xmm2 %xmm1	# round 5
+	aeskeygenassist $0x10, %xmm2, %xmm1	# round 5
 	call _key_expansion_192a
-	AESKEYGENASSIST 0x20 %xmm2 %xmm1	# round 6
+	aeskeygenassist $0x20, %xmm2, %xmm1	# round 6
 	call _key_expansion_192b
-	AESKEYGENASSIST 0x40 %xmm2 %xmm1	# round 7
+	aeskeygenassist $0x40, %xmm2, %xmm1	# round 7
 	call _key_expansion_192a
-	AESKEYGENASSIST 0x80 %xmm2 %xmm1	# round 8
+	aeskeygenassist $0x80, %xmm2, %xmm1	# round 8
 	call _key_expansion_192b
 	jmp .Ldec_key
 .Lenc_key128:
-	AESKEYGENASSIST 0x1 %xmm0 %xmm1		# round 1
+	aeskeygenassist $0x1, %xmm0, %xmm1	# round 1
 	call _key_expansion_128
-	AESKEYGENASSIST 0x2 %xmm0 %xmm1		# round 2
+	aeskeygenassist $0x2, %xmm0, %xmm1	# round 2
 	call _key_expansion_128
-	AESKEYGENASSIST 0x4 %xmm0 %xmm1		# round 3
+	aeskeygenassist $0x4, %xmm0, %xmm1	# round 3
 	call _key_expansion_128
-	AESKEYGENASSIST 0x8 %xmm0 %xmm1		# round 4
+	aeskeygenassist $0x8, %xmm0, %xmm1	# round 4
 	call _key_expansion_128
-	AESKEYGENASSIST 0x10 %xmm0 %xmm1	# round 5
+	aeskeygenassist $0x10, %xmm0, %xmm1	# round 5
 	call _key_expansion_128
-	AESKEYGENASSIST 0x20 %xmm0 %xmm1	# round 6
+	aeskeygenassist $0x20, %xmm0, %xmm1	# round 6
 	call _key_expansion_128
-	AESKEYGENASSIST 0x40 %xmm0 %xmm1	# round 7
+	aeskeygenassist $0x40, %xmm0, %xmm1	# round 7
 	call _key_expansion_128
-	AESKEYGENASSIST 0x80 %xmm0 %xmm1	# round 8
+	aeskeygenassist $0x80, %xmm0, %xmm1	# round 8
 	call _key_expansion_128
-	AESKEYGENASSIST 0x1b %xmm0 %xmm1	# round 9
+	aeskeygenassist $0x1b, %xmm0, %xmm1	# round 9
 	call _key_expansion_128
-	AESKEYGENASSIST 0x36 %xmm0 %xmm1	# round 10
+	aeskeygenassist $0x36, %xmm0, %xmm1	# round 10
 	call _key_expansion_128
 .Ldec_key:
 	sub $0x10, TKEYP
@@ -1927,7 +1926,7 @@ SYM_FUNC_START(aesni_set_key)
 .align 4
 .Ldec_key_loop:
 	movaps (KEYP), %xmm0
-	AESIMC %xmm0 %xmm1
+	aesimc %xmm0, %xmm1
 	movaps %xmm1, (UKEYP)
 	add $0x10, KEYP
 	sub $0x10, UKEYP
@@ -1988,37 +1987,37 @@ SYM_FUNC_START_LOCAL(_aesni_enc1)
 	je .Lenc192
 	add $0x20, TKEYP
 	movaps -0x60(TKEYP), KEY
-	AESENC KEY STATE
+	aesenc KEY, STATE
 	movaps -0x50(TKEYP), KEY
-	AESENC KEY STATE
+	aesenc KEY, STATE
 .align 4
 .Lenc192:
 	movaps -0x40(TKEYP), KEY
-	AESENC KEY STATE
+	aesenc KEY, STATE
 	movaps -0x30(TKEYP), KEY
-	AESENC KEY STATE
+	aesenc KEY, STATE
 .align 4
 .Lenc128:
 	movaps -0x20(TKEYP), KEY
-	AESENC KEY STATE
+	aesenc KEY, STATE
 	movaps -0x10(TKEYP), KEY
-	AESENC KEY STATE
+	aesenc KEY, STATE
 	movaps (TKEYP), KEY
-	AESENC KEY STATE
+	aesenc KEY, STATE
 	movaps 0x10(TKEYP), KEY
-	AESENC KEY STATE
+	aesenc KEY, STATE
 	movaps 0x20(TKEYP), KEY
-	AESENC KEY STATE
+	aesenc KEY, STATE
 	movaps 0x30(TKEYP), KEY
-	AESENC KEY STATE
+	aesenc KEY, STATE
 	movaps 0x40(TKEYP), KEY
-	AESENC KEY STATE
+	aesenc KEY, STATE
 	movaps 0x50(TKEYP), KEY
-	AESENC KEY STATE
+	aesenc KEY, STATE
 	movaps 0x60(TKEYP), KEY
-	AESENC KEY STATE
+	aesenc KEY, STATE
 	movaps 0x70(TKEYP), KEY
-	AESENCLAST KEY STATE
+	aesenclast KEY, STATE
 	ret
 SYM_FUNC_END(_aesni_enc1)
 
@@ -2054,79 +2053,79 @@ SYM_FUNC_START_LOCAL(_aesni_enc4)
 	je .L4enc192
 	add $0x20, TKEYP
 	movaps -0x60(TKEYP), KEY
-	AESENC KEY STATE1
-	AESENC KEY STATE2
-	AESENC KEY STATE3
-	AESENC KEY STATE4
+	aesenc KEY, STATE1
+	aesenc KEY, STATE2
+	aesenc KEY, STATE3
+	aesenc KEY, STATE4
 	movaps -0x50(TKEYP), KEY
-	AESENC KEY STATE1
-	AESENC KEY STATE2
-	AESENC KEY STATE3
-	AESENC KEY STATE4
+	aesenc KEY, STATE1
+	aesenc KEY, STATE2
+	aesenc KEY, STATE3
+	aesenc KEY, STATE4
 #.align 4
 .L4enc192:
 	movaps -0x40(TKEYP), KEY
-	AESENC KEY STATE1
-	AESENC KEY STATE2
-	AESENC KEY STATE3
-	AESENC KEY STATE4
+	aesenc KEY, STATE1
+	aesenc KEY, STATE2
+	aesenc KEY, STATE3
+	aesenc KEY, STATE4
 	movaps -0x30(TKEYP), KEY
-	AESENC KEY STATE1
-	AESENC KEY STATE2
-	AESENC KEY STATE3
-	AESENC KEY STATE4
+	aesenc KEY, STATE1
+	aesenc KEY, STATE2
+	aesenc KEY, STATE3
+	aesenc KEY, STATE4
 #.align 4
 .L4enc128:
 	movaps -0x20(TKEYP), KEY
-	AESENC KEY STATE1
-	AESENC KEY STATE2
-	AESENC KEY STATE3
-	AESENC KEY STATE4
+	aesenc KEY, STATE1
+	aesenc KEY, STATE2
+	aesenc KEY, STATE3
+	aesenc KEY, STATE4
 	movaps -0x10(TKEYP), KEY
-	AESENC KEY STATE1
-	AESENC KEY STATE2
-	AESENC KEY STATE3
-	AESENC KEY STATE4
+	aesenc KEY, STATE1
+	aesenc KEY, STATE2
+	aesenc KEY, STATE3
+	aesenc KEY, STATE4
 	movaps (TKEYP), KEY
-	AESENC KEY STATE1
-	AESENC KEY STATE2
-	AESENC KEY STATE3
-	AESENC KEY STATE4
+	aesenc KEY, STATE1
+	aesenc KEY, STATE2
+	aesenc KEY, STATE3
+	aesenc KEY, STATE4
 	movaps 0x10(TKEYP), KEY
-	AESENC KEY STATE1
-	AESENC KEY STATE2
-	AESENC KEY STATE3
-	AESENC KEY STATE4
+	aesenc KEY, STATE1
+	aesenc KEY, STATE2
+	aesenc KEY, STATE3
+	aesenc KEY, STATE4
 	movaps 0x20(TKEYP), KEY
-	AESENC KEY STATE1
-	AESENC KEY STATE2
-	AESENC KEY STATE3
-	AESENC KEY STATE4
+	aesenc KEY, STATE1
+	aesenc KEY, STATE2
+	aesenc KEY, STATE3
+	aesenc KEY, STATE4
 	movaps 0x30(TKEYP), KEY
-	AESENC KEY STATE1
-	AESENC KEY STATE2
-	AESENC KEY STATE3
-	AESENC KEY STATE4
+	aesenc KEY, STATE1
+	aesenc KEY, STATE2
+	aesenc KEY, STATE3
+	aesenc KEY, STATE4
 	movaps 0x40(TKEYP), KEY
-	AESENC KEY STATE1
-	AESENC KEY STATE2
-	AESENC KEY STATE3
-	AESENC KEY STATE4
+	aesenc KEY, STATE1
+	aesenc KEY, STATE2
+	aesenc KEY, STATE3
+	aesenc KEY, STATE4
 	movaps 0x50(TKEYP), KEY
-	AESENC KEY STATE1
-	AESENC KEY STATE2
-	AESENC KEY STATE3
-	AESENC KEY STATE4
+	aesenc KEY, STATE1
+	aesenc KEY, STATE2
+	aesenc KEY, STATE3
+	aesenc KEY, STATE4
 	movaps 0x60(TKEYP), KEY
-	AESENC KEY STATE1
-	AESENC KEY STATE2
-	AESENC KEY STATE3
-	AESENC KEY STATE4
+	aesenc KEY, STATE1
+	aesenc KEY, STATE2
+	aesenc KEY, STATE3
+	aesenc KEY, STATE4
 	movaps 0x70(TKEYP), KEY
-	AESENCLAST KEY STATE1		# last round
-	AESENCLAST KEY STATE2
-	AESENCLAST KEY STATE3
-	AESENCLAST KEY STATE4
+	aesenclast KEY, STATE1		# last round
+	aesenclast KEY, STATE2
+	aesenclast KEY, STATE3
+	aesenclast KEY, STATE4
 	ret
 SYM_FUNC_END(_aesni_enc4)
 
@@ -2178,37 +2177,37 @@ SYM_FUNC_START_LOCAL(_aesni_dec1)
 	je .Ldec192
 	add $0x20, TKEYP
 	movaps -0x60(TKEYP), KEY
-	AESDEC KEY STATE
+	aesdec KEY, STATE
 	movaps -0x50(TKEYP), KEY
-	AESDEC KEY STATE
+	aesdec KEY, STATE
 .align 4
 .Ldec192:
 	movaps -0x40(TKEYP), KEY
-	AESDEC KEY STATE
+	aesdec KEY, STATE
 	movaps -0x30(TKEYP), KEY
-	AESDEC KEY STATE
+	aesdec KEY, STATE
 .align 4
 .Ldec128:
 	movaps -0x20(TKEYP), KEY
-	AESDEC KEY STATE
+	aesdec KEY, STATE
 	movaps -0x10(TKEYP), KEY
-	AESDEC KEY STATE
+	aesdec KEY, STATE
 	movaps (TKEYP), KEY
-	AESDEC KEY STATE
+	aesdec KEY, STATE
 	movaps 0x10(TKEYP), KEY
-	AESDEC KEY STATE
+	aesdec KEY, STATE
 	movaps 0x20(TKEYP), KEY
-	AESDEC KEY STATE
+	aesdec KEY, STATE
 	movaps 0x30(TKEYP), KEY
-	AESDEC KEY STATE
+	aesdec KEY, STATE
 	movaps 0x40(TKEYP), KEY
-	AESDEC KEY STATE
+	aesdec KEY, STATE
 	movaps 0x50(TKEYP), KEY
-	AESDEC KEY STATE
+	aesdec KEY, STATE
 	movaps 0x60(TKEYP), KEY
-	AESDEC KEY STATE
+	aesdec KEY, STATE
 	movaps 0x70(TKEYP), KEY
-	AESDECLAST KEY STATE
+	aesdeclast KEY, STATE
 	ret
 SYM_FUNC_END(_aesni_dec1)
 
@@ -2244,79 +2243,79 @@ SYM_FUNC_START_LOCAL(_aesni_dec4)
 	je .L4dec192
 	add $0x20, TKEYP
 	movaps -0x60(TKEYP), KEY
-	AESDEC KEY STATE1
-	AESDEC KEY STATE2
-	AESDEC KEY STATE3
-	AESDEC KEY STATE4
+	aesdec KEY, STATE1
+	aesdec KEY, STATE2
+	aesdec KEY, STATE3
+	aesdec KEY, STATE4
 	movaps -0x50(TKEYP), KEY
-	AESDEC KEY STATE1
-	AESDEC KEY STATE2
-	AESDEC KEY STATE3
-	AESDEC KEY STATE4
+	aesdec KEY, STATE1
+	aesdec KEY, STATE2
+	aesdec KEY, STATE3
+	aesdec KEY, STATE4
 .align 4
 .L4dec192:
 	movaps -0x40(TKEYP), KEY
-	AESDEC KEY STATE1
-	AESDEC KEY STATE2
-	AESDEC KEY STATE3
-	AESDEC KEY STATE4
+	aesdec KEY, STATE1
+	aesdec KEY, STATE2
+	aesdec KEY, STATE3
+	aesdec KEY, STATE4
 	movaps -0x30(TKEYP), KEY
-	AESDEC KEY STATE1
-	AESDEC KEY STATE2
-	AESDEC KEY STATE3
-	AESDEC KEY STATE4
+	aesdec KEY, STATE1
+	aesdec KEY, STATE2
+	aesdec KEY, STATE3
+	aesdec KEY, STATE4
 .align 4
 .L4dec128:
 	movaps -0x20(TKEYP), KEY
-	AESDEC KEY STATE1
-	AESDEC KEY STATE2
-	AESDEC KEY STATE3
-	AESDEC KEY STATE4
+	aesdec KEY, STATE1
+	aesdec KEY, STATE2
+	aesdec KEY, STATE3
+	aesdec KEY, STATE4
 	movaps -0x10(TKEYP), KEY
-	AESDEC KEY STATE1
-	AESDEC KEY STATE2
-	AESDEC KEY STATE3
-	AESDEC KEY STATE4
+	aesdec KEY, STATE1
+	aesdec KEY, STATE2
+	aesdec KEY, STATE3
+	aesdec KEY, STATE4
 	movaps (TKEYP), KEY
-	AESDEC KEY STATE1
-	AESDEC KEY STATE2
-	AESDEC KEY STATE3
-	AESDEC KEY STATE4
+	aesdec KEY, STATE1
+	aesdec KEY, STATE2
+	aesdec KEY, STATE3
+	aesdec KEY, STATE4
 	movaps 0x10(TKEYP), KEY
-	AESDEC KEY STATE1
-	AESDEC KEY STATE2
-	AESDEC KEY STATE3
-	AESDEC KEY STATE4
+	aesdec KEY, STATE1
+	aesdec KEY, STATE2
+	aesdec KEY, STATE3
+	aesdec KEY, STATE4
 	movaps 0x20(TKEYP), KEY
-	AESDEC KEY STATE1
-	AESDEC KEY STATE2
-	AESDEC KEY STATE3
-	AESDEC KEY STATE4
+	aesdec KEY, STATE1
+	aesdec KEY, STATE2
+	aesdec KEY, STATE3
+	aesdec KEY, STATE4
 	movaps 0x30(TKEYP), KEY
-	AESDEC KEY STATE1
-	AESDEC KEY STATE2
-	AESDEC KEY STATE3
-	AESDEC KEY STATE4
+	aesdec KEY, STATE1
+	aesdec KEY, STATE2
+	aesdec KEY, STATE3
+	aesdec KEY, STATE4
 	movaps 0x40(TKEYP), KEY
-	AESDEC KEY STATE1
-	AESDEC KEY STATE2
-	AESDEC KEY STATE3
-	AESDEC KEY STATE4
+	aesdec KEY, STATE1
+	aesdec KEY, STATE2
+	aesdec KEY, STATE3
+	aesdec KEY, STATE4
 	movaps 0x50(TKEYP), KEY
-	AESDEC KEY STATE1
-	AESDEC KEY STATE2
-	AESDEC KEY STATE3
-	AESDEC KEY STATE4
+	aesdec KEY, STATE1
+	aesdec KEY, STATE2
+	aesdec KEY, STATE3
+	aesdec KEY, STATE4
 	movaps 0x60(TKEYP), KEY
-	AESDEC KEY STATE1
-	AESDEC KEY STATE2
-	AESDEC KEY STATE3
-	AESDEC KEY STATE4
+	aesdec KEY, STATE1
+	aesdec KEY, STATE2
+	aesdec KEY, STATE3
+	aesdec KEY, STATE4
 	movaps 0x70(TKEYP), KEY
-	AESDECLAST KEY STATE1		# last round
-	AESDECLAST KEY STATE2
-	AESDECLAST KEY STATE3
-	AESDECLAST KEY STATE4
+	aesdeclast KEY, STATE1		# last round
+	aesdeclast KEY, STATE2
+	aesdeclast KEY, STATE3
+	aesdeclast KEY, STATE4
 	ret
 SYM_FUNC_END(_aesni_dec4)
 
@@ -2599,10 +2598,10 @@ SYM_FUNC_END(aesni_cbc_dec)
 SYM_FUNC_START_LOCAL(_aesni_inc_init)
 	movaps .Lbswap_mask, BSWAP_MASK
 	movaps IV, CTR
-	PSHUFB_XMM BSWAP_MASK CTR
+	pshufb BSWAP_MASK, CTR
 	mov $1, TCTR_LOW
-	MOVQ_R64_XMM TCTR_LOW INC
-	MOVQ_R64_XMM CTR TCTR_LOW
+	movq TCTR_LOW, INC
+	movq CTR, TCTR_LOW
 	ret
 SYM_FUNC_END(_aesni_inc_init)
 
@@ -2630,7 +2629,7 @@ SYM_FUNC_START_LOCAL(_aesni_inc)
 	psrldq $8, INC
 .Linc_low:
 	movaps CTR, IV
-	PSHUFB_XMM BSWAP_MASK IV
+	pshufb BSWAP_MASK, IV
 	ret
 SYM_FUNC_END(_aesni_inc)
 
diff --git a/arch/x86/crypto/aesni-intel_avx-x86_64.S b/arch/x86/crypto/aesni-intel_avx-x86_64.S
index 0cea33295287..5fee47956f3b 100644
--- a/arch/x86/crypto/aesni-intel_avx-x86_64.S
+++ b/arch/x86/crypto/aesni-intel_avx-x86_64.S
@@ -120,7 +120,6 @@
 ##
 
 #include <linux/linkage.h>
-#include <asm/inst.h>
 
 # constants in mergeable sections, linker can reorder and merge
 .section	.rodata.cst16.POLY, "aM", @progbits, 16
diff --git a/arch/x86/crypto/chacha-ssse3-x86_64.S b/arch/x86/crypto/chacha-ssse3-x86_64.S
index a38ab2512a6f..ca1788bfee16 100644
--- a/arch/x86/crypto/chacha-ssse3-x86_64.S
+++ b/arch/x86/crypto/chacha-ssse3-x86_64.S
@@ -120,10 +120,10 @@ SYM_FUNC_START(chacha_block_xor_ssse3)
 	FRAME_BEGIN
 
 	# x0..3 = s0..3
-	movdqa		0x00(%rdi),%xmm0
-	movdqa		0x10(%rdi),%xmm1
-	movdqa		0x20(%rdi),%xmm2
-	movdqa		0x30(%rdi),%xmm3
+	movdqu		0x00(%rdi),%xmm0
+	movdqu		0x10(%rdi),%xmm1
+	movdqu		0x20(%rdi),%xmm2
+	movdqu		0x30(%rdi),%xmm3
 	movdqa		%xmm0,%xmm8
 	movdqa		%xmm1,%xmm9
 	movdqa		%xmm2,%xmm10
@@ -205,10 +205,10 @@ SYM_FUNC_START(hchacha_block_ssse3)
 	# %edx: nrounds
 	FRAME_BEGIN
 
-	movdqa		0x00(%rdi),%xmm0
-	movdqa		0x10(%rdi),%xmm1
-	movdqa		0x20(%rdi),%xmm2
-	movdqa		0x30(%rdi),%xmm3
+	movdqu		0x00(%rdi),%xmm0
+	movdqu		0x10(%rdi),%xmm1
+	movdqu		0x20(%rdi),%xmm2
+	movdqu		0x30(%rdi),%xmm3
 
 	mov		%edx,%r8d
 	call		chacha_permute
diff --git a/arch/x86/crypto/chacha_glue.c b/arch/x86/crypto/chacha_glue.c
index 22250091cdbe..e67a59130025 100644
--- a/arch/x86/crypto/chacha_glue.c
+++ b/arch/x86/crypto/chacha_glue.c
@@ -14,8 +14,6 @@
 #include <linux/module.h>
 #include <asm/simd.h>
 
-#define CHACHA_STATE_ALIGN 16
-
 asmlinkage void chacha_block_xor_ssse3(u32 *state, u8 *dst, const u8 *src,
 				       unsigned int len, int nrounds);
 asmlinkage void chacha_4block_xor_ssse3(u32 *state, u8 *dst, const u8 *src,
@@ -124,8 +122,6 @@ static void chacha_dosimd(u32 *state, u8 *dst, const u8 *src,
 
 void hchacha_block_arch(const u32 *state, u32 *stream, int nrounds)
 {
-	state = PTR_ALIGN(state, CHACHA_STATE_ALIGN);
-
 	if (!static_branch_likely(&chacha_use_simd) || !crypto_simd_usable()) {
 		hchacha_block_generic(state, stream, nrounds);
 	} else {
@@ -138,8 +134,6 @@ EXPORT_SYMBOL(hchacha_block_arch);
 
 void chacha_init_arch(u32 *state, const u32 *key, const u8 *iv)
 {
-	state = PTR_ALIGN(state, CHACHA_STATE_ALIGN);
-
 	chacha_init_generic(state, key, iv);
 }
 EXPORT_SYMBOL(chacha_init_arch);
@@ -147,8 +141,6 @@ EXPORT_SYMBOL(chacha_init_arch);
 void chacha_crypt_arch(u32 *state, u8 *dst, const u8 *src, unsigned int bytes,
 		       int nrounds)
 {
-	state = PTR_ALIGN(state, CHACHA_STATE_ALIGN);
-
 	if (!static_branch_likely(&chacha_use_simd) || !crypto_simd_usable() ||
 	    bytes <= CHACHA_BLOCK_SIZE)
 		return chacha_crypt_generic(state, dst, src, bytes, nrounds);
@@ -170,15 +162,12 @@ EXPORT_SYMBOL(chacha_crypt_arch);
 static int chacha_simd_stream_xor(struct skcipher_request *req,
 				  const struct chacha_ctx *ctx, const u8 *iv)
 {
-	u32 *state, state_buf[16 + 2] __aligned(8);
+	u32 state[CHACHA_STATE_WORDS] __aligned(8);
 	struct skcipher_walk walk;
 	int err;
 
 	err = skcipher_walk_virt(&walk, req, false);
 
-	BUILD_BUG_ON(CHACHA_STATE_ALIGN != 16);
-	state = PTR_ALIGN(state_buf + 0, CHACHA_STATE_ALIGN);
-
 	chacha_init_generic(state, ctx->key, iv);
 
 	while (walk.nbytes > 0) {
@@ -217,12 +206,10 @@ static int xchacha_simd(struct skcipher_request *req)
 {
 	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
 	struct chacha_ctx *ctx = crypto_skcipher_ctx(tfm);
-	u32 *state, state_buf[16 + 2] __aligned(8);
+	u32 state[CHACHA_STATE_WORDS] __aligned(8);
 	struct chacha_ctx subctx;
 	u8 real_iv[16];
 
-	BUILD_BUG_ON(CHACHA_STATE_ALIGN != 16);
-	state = PTR_ALIGN(state_buf + 0, CHACHA_STATE_ALIGN);
 	chacha_init_generic(state, ctx->key, req->iv);
 
 	if (req->cryptlen > CHACHA_BLOCK_SIZE && crypto_simd_usable()) {
diff --git a/arch/x86/crypto/crc32-pclmul_asm.S b/arch/x86/crypto/crc32-pclmul_asm.S
index 9fd28ff65bc2..6e7d4c4d3208 100644
--- a/arch/x86/crypto/crc32-pclmul_asm.S
+++ b/arch/x86/crypto/crc32-pclmul_asm.S
@@ -38,7 +38,6 @@
  */
 
 #include <linux/linkage.h>
-#include <asm/inst.h>
 
 
 .section .rodata
@@ -129,17 +128,17 @@ loop_64:/*  64 bytes Full cache line folding */
 #ifdef __x86_64__
 	movdqa  %xmm4, %xmm8
 #endif
-	PCLMULQDQ 00, CONSTANT, %xmm1
-	PCLMULQDQ 00, CONSTANT, %xmm2
-	PCLMULQDQ 00, CONSTANT, %xmm3
+	pclmulqdq $0x00, CONSTANT, %xmm1
+	pclmulqdq $0x00, CONSTANT, %xmm2
+	pclmulqdq $0x00, CONSTANT, %xmm3
 #ifdef __x86_64__
-	PCLMULQDQ 00, CONSTANT, %xmm4
+	pclmulqdq $0x00, CONSTANT, %xmm4
 #endif
-	PCLMULQDQ 0x11, CONSTANT, %xmm5
-	PCLMULQDQ 0x11, CONSTANT, %xmm6
-	PCLMULQDQ 0x11, CONSTANT, %xmm7
+	pclmulqdq $0x11, CONSTANT, %xmm5
+	pclmulqdq $0x11, CONSTANT, %xmm6
+	pclmulqdq $0x11, CONSTANT, %xmm7
 #ifdef __x86_64__
-	PCLMULQDQ 0x11, CONSTANT, %xmm8
+	pclmulqdq $0x11, CONSTANT, %xmm8
 #endif
 	pxor    %xmm5, %xmm1
 	pxor    %xmm6, %xmm2
@@ -149,8 +148,8 @@ loop_64:/*  64 bytes Full cache line folding */
 #else
 	/* xmm8 unsupported for x32 */
 	movdqa  %xmm4, %xmm5
-	PCLMULQDQ 00, CONSTANT, %xmm4
-	PCLMULQDQ 0x11, CONSTANT, %xmm5
+	pclmulqdq $0x00, CONSTANT, %xmm4
+	pclmulqdq $0x11, CONSTANT, %xmm5
 	pxor    %xmm5, %xmm4
 #endif
 
@@ -172,20 +171,20 @@ less_64:/*  Folding cache line into 128bit */
 	prefetchnta     (BUF)
 
 	movdqa  %xmm1, %xmm5
-	PCLMULQDQ 0x00, CONSTANT, %xmm1
-	PCLMULQDQ 0x11, CONSTANT, %xmm5
+	pclmulqdq $0x00, CONSTANT, %xmm1
+	pclmulqdq $0x11, CONSTANT, %xmm5
 	pxor    %xmm5, %xmm1
 	pxor    %xmm2, %xmm1
 
 	movdqa  %xmm1, %xmm5
-	PCLMULQDQ 0x00, CONSTANT, %xmm1
-	PCLMULQDQ 0x11, CONSTANT, %xmm5
+	pclmulqdq $0x00, CONSTANT, %xmm1
+	pclmulqdq $0x11, CONSTANT, %xmm5
 	pxor    %xmm5, %xmm1
 	pxor    %xmm3, %xmm1
 
 	movdqa  %xmm1, %xmm5
-	PCLMULQDQ 0x00, CONSTANT, %xmm1
-	PCLMULQDQ 0x11, CONSTANT, %xmm5
+	pclmulqdq $0x00, CONSTANT, %xmm1
+	pclmulqdq $0x11, CONSTANT, %xmm5
 	pxor    %xmm5, %xmm1
 	pxor    %xmm4, %xmm1
 
@@ -193,8 +192,8 @@ less_64:/*  Folding cache line into 128bit */
 	jb      fold_64
 loop_16:/* Folding rest buffer into 128bit */
 	movdqa  %xmm1, %xmm5
-	PCLMULQDQ 0x00, CONSTANT, %xmm1
-	PCLMULQDQ 0x11, CONSTANT, %xmm5
+	pclmulqdq $0x00, CONSTANT, %xmm1
+	pclmulqdq $0x11, CONSTANT, %xmm5
 	pxor    %xmm5, %xmm1
 	pxor    (BUF), %xmm1
 	sub     $0x10, LEN
@@ -205,7 +204,7 @@ loop_16:/* Folding rest buffer into 128bit */
 fold_64:
 	/* perform the last 64 bit fold, also adds 32 zeroes
 	 * to the input stream */
-	PCLMULQDQ 0x01, %xmm1, CONSTANT /* R4 * xmm1.low */
+	pclmulqdq $0x01, %xmm1, CONSTANT /* R4 * xmm1.low */
 	psrldq  $0x08, %xmm1
 	pxor    CONSTANT, %xmm1
 
@@ -220,7 +219,7 @@ fold_64:
 #endif
 	psrldq  $0x04, %xmm2
 	pand    %xmm3, %xmm1
-	PCLMULQDQ 0x00, CONSTANT, %xmm1
+	pclmulqdq $0x00, CONSTANT, %xmm1
 	pxor    %xmm2, %xmm1
 
 	/* Finish up with the bit-reversed barrett reduction 64 ==> 32 bits */
@@ -231,11 +230,11 @@ fold_64:
 #endif
 	movdqa  %xmm1, %xmm2
 	pand    %xmm3, %xmm1
-	PCLMULQDQ 0x10, CONSTANT, %xmm1
+	pclmulqdq $0x10, CONSTANT, %xmm1
 	pand    %xmm3, %xmm1
-	PCLMULQDQ 0x00, CONSTANT, %xmm1
+	pclmulqdq $0x00, CONSTANT, %xmm1
 	pxor    %xmm2, %xmm1
-	PEXTRD  0x01, %xmm1, %eax
+	pextrd  $0x01, %xmm1, %eax
 
 	ret
 SYM_FUNC_END(crc32_pclmul_le_16)
diff --git a/arch/x86/crypto/crc32c-pcl-intel-asm_64.S b/arch/x86/crypto/crc32c-pcl-intel-asm_64.S
index 8501ec4532f4..884dc767b051 100644
--- a/arch/x86/crypto/crc32c-pcl-intel-asm_64.S
+++ b/arch/x86/crypto/crc32c-pcl-intel-asm_64.S
@@ -43,7 +43,6 @@
  * SOFTWARE.
  */
 
-#include <asm/inst.h>
 #include <linux/linkage.h>
 #include <asm/nospec-branch.h>
 
@@ -170,7 +169,7 @@ continue_block:
 
 	## branch into array
 	lea	jump_table(%rip), %bufp
-	movzxw  (%bufp, %rax, 2), len
+	movzwq  (%bufp, %rax, 2), len
 	lea	crc_array(%rip), %bufp
 	lea     (%bufp, len, 1), %bufp
 	JMP_NOSPEC bufp
@@ -225,10 +224,10 @@ LABEL crc_ %i
 	subq    %rax, tmp			# tmp -= rax*24
 
 	movq    crc_init, %xmm1			# CRC for block 1
-	PCLMULQDQ 0x00,%xmm0,%xmm1		# Multiply by K2
+	pclmulqdq $0x00, %xmm0, %xmm1		# Multiply by K2
 
 	movq    crc1, %xmm2			# CRC for block 2
-	PCLMULQDQ 0x10, %xmm0, %xmm2		# Multiply by K1
+	pclmulqdq $0x10, %xmm0, %xmm2		# Multiply by K1
 
 	pxor    %xmm2,%xmm1
 	movq    %xmm1, %rax
diff --git a/arch/x86/crypto/curve25519-x86_64.c b/arch/x86/crypto/curve25519-x86_64.c
index 8a17621f7d3a..8acbb6584a37 100644
--- a/arch/x86/crypto/curve25519-x86_64.c
+++ b/arch/x86/crypto/curve25519-x86_64.c
@@ -948,10 +948,8 @@ static void store_felem(u64 *b, u64 *f)
 {
 	u64 f30 = f[3U];
 	u64 top_bit0 = f30 >> (u32)63U;
-	u64 carry0;
 	u64 f31;
 	u64 top_bit;
-	u64 carry;
 	u64 f0;
 	u64 f1;
 	u64 f2;
@@ -970,11 +968,11 @@ static void store_felem(u64 *b, u64 *f)
 	u64 o2;
 	u64 o3;
 	f[3U] = f30 & (u64)0x7fffffffffffffffU;
-	carry0 = add_scalar(f, f, (u64)19U * top_bit0);
+	add_scalar(f, f, (u64)19U * top_bit0);
 	f31 = f[3U];
 	top_bit = f31 >> (u32)63U;
 	f[3U] = f31 & (u64)0x7fffffffffffffffU;
-	carry = add_scalar(f, f, (u64)19U * top_bit);
+	add_scalar(f, f, (u64)19U * top_bit);
 	f0 = f[0U];
 	f1 = f[1U];
 	f2 = f[2U];
diff --git a/arch/x86/crypto/ghash-clmulni-intel_asm.S b/arch/x86/crypto/ghash-clmulni-intel_asm.S
index bb9735fbb865..99ac25e18e09 100644
--- a/arch/x86/crypto/ghash-clmulni-intel_asm.S
+++ b/arch/x86/crypto/ghash-clmulni-intel_asm.S
@@ -14,7 +14,6 @@
  */
 
 #include <linux/linkage.h>
-#include <asm/inst.h>
 #include <asm/frame.h>
 
 .section	.rodata.cst16.bswap_mask, "aM", @progbits, 16
@@ -51,9 +50,9 @@ SYM_FUNC_START_LOCAL(__clmul_gf128mul_ble)
 	pxor DATA, T2
 	pxor SHASH, T3
 
-	PCLMULQDQ 0x00 SHASH DATA	# DATA = a0 * b0
-	PCLMULQDQ 0x11 SHASH T1		# T1 = a1 * b1
-	PCLMULQDQ 0x00 T3 T2		# T2 = (a1 + a0) * (b1 + b0)
+	pclmulqdq $0x00, SHASH, DATA	# DATA = a0 * b0
+	pclmulqdq $0x11, SHASH, T1	# T1 = a1 * b1
+	pclmulqdq $0x00, T3, T2		# T2 = (a1 + a0) * (b1 + b0)
 	pxor DATA, T2
 	pxor T1, T2			# T2 = a0 * b1 + a1 * b0
 
@@ -95,9 +94,9 @@ SYM_FUNC_START(clmul_ghash_mul)
 	movups (%rdi), DATA
 	movups (%rsi), SHASH
 	movaps .Lbswap_mask, BSWAP
-	PSHUFB_XMM BSWAP DATA
+	pshufb BSWAP, DATA
 	call __clmul_gf128mul_ble
-	PSHUFB_XMM BSWAP DATA
+	pshufb BSWAP, DATA
 	movups DATA, (%rdi)
 	FRAME_END
 	ret
@@ -114,18 +113,18 @@ SYM_FUNC_START(clmul_ghash_update)
 	movaps .Lbswap_mask, BSWAP
 	movups (%rdi), DATA
 	movups (%rcx), SHASH
-	PSHUFB_XMM BSWAP DATA
+	pshufb BSWAP, DATA
 .align 4
 .Lupdate_loop:
 	movups (%rsi), IN1
-	PSHUFB_XMM BSWAP IN1
+	pshufb BSWAP, IN1
 	pxor IN1, DATA
 	call __clmul_gf128mul_ble
 	sub $16, %rdx
 	add $16, %rsi
 	cmp $16, %rdx
 	jge .Lupdate_loop
-	PSHUFB_XMM BSWAP DATA
+	pshufb BSWAP, DATA
 	movups DATA, (%rdi)
 .Lupdate_just_ret:
 	FRAME_END
diff --git a/arch/x86/entry/Makefile b/arch/x86/entry/Makefile
index b7a5790d8d63..08bf95dbc911 100644
--- a/arch/x86/entry/Makefile
+++ b/arch/x86/entry/Makefile
@@ -7,12 +7,20 @@ KASAN_SANITIZE := n
 UBSAN_SANITIZE := n
 KCOV_INSTRUMENT := n
 
-CFLAGS_REMOVE_common.o = $(CC_FLAGS_FTRACE) -fstack-protector -fstack-protector-strong
-CFLAGS_REMOVE_syscall_32.o = $(CC_FLAGS_FTRACE) -fstack-protector -fstack-protector-strong
-CFLAGS_REMOVE_syscall_64.o = $(CC_FLAGS_FTRACE) -fstack-protector -fstack-protector-strong
+CFLAGS_REMOVE_common.o		= $(CC_FLAGS_FTRACE)
+CFLAGS_REMOVE_syscall_64.o	= $(CC_FLAGS_FTRACE)
+CFLAGS_REMOVE_syscall_32.o	= $(CC_FLAGS_FTRACE)
+CFLAGS_REMOVE_syscall_x32.o	= $(CC_FLAGS_FTRACE)
+
+CFLAGS_common.o			+= -fno-stack-protector
+CFLAGS_syscall_64.o		+= -fno-stack-protector
+CFLAGS_syscall_32.o		+= -fno-stack-protector
+CFLAGS_syscall_x32.o		+= -fno-stack-protector
 
 CFLAGS_syscall_64.o		+= $(call cc-option,-Wno-override-init,)
 CFLAGS_syscall_32.o		+= $(call cc-option,-Wno-override-init,)
+CFLAGS_syscall_x32.o		+= $(call cc-option,-Wno-override-init,)
+
 obj-y				:= entry_$(BITS).o thunk_$(BITS).o syscall_$(BITS).o
 obj-y				+= common.o
 
diff --git a/arch/x86/entry/calling.h b/arch/x86/entry/calling.h
index 4208c1e3f601..98e4d8886f11 100644
--- a/arch/x86/entry/calling.h
+++ b/arch/x86/entry/calling.h
@@ -6,6 +6,7 @@
 #include <asm/percpu.h>
 #include <asm/asm-offsets.h>
 #include <asm/processor-flags.h>
+#include <asm/inst.h>
 
 /*
 
@@ -341,6 +342,12 @@ For 32-bit we have the following conventions - kernel is built with
 #endif
 .endm
 
+.macro SAVE_AND_SET_GSBASE scratch_reg:req save_reg:req
+	rdgsbase \save_reg
+	GET_PERCPU_BASE \scratch_reg
+	wrgsbase \scratch_reg
+.endm
+
 #else /* CONFIG_X86_64 */
 # undef		UNWIND_HINT_IRET_REGS
 # define	UNWIND_HINT_IRET_REGS
@@ -351,3 +358,36 @@ For 32-bit we have the following conventions - kernel is built with
 	call stackleak_erase
 #endif
 .endm
+
+#ifdef CONFIG_SMP
+
+/*
+ * CPU/node NR is loaded from the limit (size) field of a special segment
+ * descriptor entry in GDT.
+ */
+.macro LOAD_CPU_AND_NODE_SEG_LIMIT reg:req
+	movq	$__CPUNODE_SEG, \reg
+	lsl	\reg, \reg
+.endm
+
+/*
+ * Fetch the per-CPU GSBASE value for this processor and put it in @reg.
+ * We normally use %gs for accessing per-CPU data, but we are setting up
+ * %gs here and obviously can not use %gs itself to access per-CPU data.
+ */
+.macro GET_PERCPU_BASE reg:req
+	ALTERNATIVE \
+		"LOAD_CPU_AND_NODE_SEG_LIMIT \reg", \
+		"RDPID	\reg", \
+		X86_FEATURE_RDPID
+	andq	$VDSO_CPUNODE_MASK, \reg
+	movq	__per_cpu_offset(, \reg, 8), \reg
+.endm
+
+#else
+
+.macro GET_PERCPU_BASE reg:req
+	movq	pcpu_unit_offsets(%rip), \reg
+.endm
+
+#endif /* CONFIG_SMP */
diff --git a/arch/x86/entry/common.c b/arch/x86/entry/common.c
index bd3f14175193..48512c7944e7 100644
--- a/arch/x86/entry/common.c
+++ b/arch/x86/entry/common.c
@@ -10,20 +10,13 @@
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/sched/task_stack.h>
+#include <linux/entry-common.h>
 #include <linux/mm.h>
 #include <linux/smp.h>
 #include <linux/errno.h>
 #include <linux/ptrace.h>
-#include <linux/tracehook.h>
-#include <linux/audit.h>
-#include <linux/seccomp.h>
-#include <linux/signal.h>
 #include <linux/export.h>
-#include <linux/context_tracking.h>
-#include <linux/user-return-notifier.h>
 #include <linux/nospec.h>
-#include <linux/uprobes.h>
-#include <linux/livepatch.h>
 #include <linux/syscalls.h>
 #include <linux/uaccess.h>
 
@@ -42,318 +35,12 @@
 #include <asm/syscall.h>
 #include <asm/irq_stack.h>
 
-#define CREATE_TRACE_POINTS
-#include <trace/events/syscalls.h>
-
-#ifdef CONFIG_CONTEXT_TRACKING
-/**
- * enter_from_user_mode - Establish state when coming from user mode
- *
- * Syscall entry disables interrupts, but user mode is traced as interrupts
- * enabled. Also with NO_HZ_FULL RCU might be idle.
- *
- * 1) Tell lockdep that interrupts are disabled
- * 2) Invoke context tracking if enabled to reactivate RCU
- * 3) Trace interrupts off state
- */
-static noinstr void enter_from_user_mode(void)
-{
-	enum ctx_state state = ct_state();
-
-	lockdep_hardirqs_off(CALLER_ADDR0);
-	user_exit_irqoff();
-
-	instrumentation_begin();
-	CT_WARN_ON(state != CONTEXT_USER);
-	trace_hardirqs_off_finish();
-	instrumentation_end();
-}
-#else
-static __always_inline void enter_from_user_mode(void)
-{
-	lockdep_hardirqs_off(CALLER_ADDR0);
-	instrumentation_begin();
-	trace_hardirqs_off_finish();
-	instrumentation_end();
-}
-#endif
-
-/**
- * exit_to_user_mode - Fixup state when exiting to user mode
- *
- * Syscall exit enables interrupts, but the kernel state is interrupts
- * disabled when this is invoked. Also tell RCU about it.
- *
- * 1) Trace interrupts on state
- * 2) Invoke context tracking if enabled to adjust RCU state
- * 3) Clear CPU buffers if CPU is affected by MDS and the migitation is on.
- * 4) Tell lockdep that interrupts are enabled
- */
-static __always_inline void exit_to_user_mode(void)
-{
-	instrumentation_begin();
-	trace_hardirqs_on_prepare();
-	lockdep_hardirqs_on_prepare(CALLER_ADDR0);
-	instrumentation_end();
-
-	user_enter_irqoff();
-	mds_user_clear_cpu_buffers();
-	lockdep_hardirqs_on(CALLER_ADDR0);
-}
-
-static void do_audit_syscall_entry(struct pt_regs *regs, u32 arch)
-{
-#ifdef CONFIG_X86_64
-	if (arch == AUDIT_ARCH_X86_64) {
-		audit_syscall_entry(regs->orig_ax, regs->di,
-				    regs->si, regs->dx, regs->r10);
-	} else
-#endif
-	{
-		audit_syscall_entry(regs->orig_ax, regs->bx,
-				    regs->cx, regs->dx, regs->si);
-	}
-}
-
-/*
- * Returns the syscall nr to run (which should match regs->orig_ax) or -1
- * to skip the syscall.
- */
-static long syscall_trace_enter(struct pt_regs *regs)
-{
-	u32 arch = in_ia32_syscall() ? AUDIT_ARCH_I386 : AUDIT_ARCH_X86_64;
-
-	struct thread_info *ti = current_thread_info();
-	unsigned long ret = 0;
-	u32 work;
-
-	if (IS_ENABLED(CONFIG_DEBUG_ENTRY))
-		BUG_ON(regs != task_pt_regs(current));
-
-	work = READ_ONCE(ti->flags);
-
-	if (work & (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_EMU)) {
-		ret = tracehook_report_syscall_entry(regs);
-		if (ret || (work & _TIF_SYSCALL_EMU))
-			return -1L;
-	}
-
-#ifdef CONFIG_SECCOMP
-	/*
-	 * Do seccomp after ptrace, to catch any tracer changes.
-	 */
-	if (work & _TIF_SECCOMP) {
-		struct seccomp_data sd;
-
-		sd.arch = arch;
-		sd.nr = regs->orig_ax;
-		sd.instruction_pointer = regs->ip;
-#ifdef CONFIG_X86_64
-		if (arch == AUDIT_ARCH_X86_64) {
-			sd.args[0] = regs->di;
-			sd.args[1] = regs->si;
-			sd.args[2] = regs->dx;
-			sd.args[3] = regs->r10;
-			sd.args[4] = regs->r8;
-			sd.args[5] = regs->r9;
-		} else
-#endif
-		{
-			sd.args[0] = regs->bx;
-			sd.args[1] = regs->cx;
-			sd.args[2] = regs->dx;
-			sd.args[3] = regs->si;
-			sd.args[4] = regs->di;
-			sd.args[5] = regs->bp;
-		}
-
-		ret = __secure_computing(&sd);
-		if (ret == -1)
-			return ret;
-	}
-#endif
-
-	if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
-		trace_sys_enter(regs, regs->orig_ax);
-
-	do_audit_syscall_entry(regs, arch);
-
-	return ret ?: regs->orig_ax;
-}
-
-#define EXIT_TO_USERMODE_LOOP_FLAGS				\
-	(_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_UPROBE |	\
-	 _TIF_NEED_RESCHED | _TIF_USER_RETURN_NOTIFY | _TIF_PATCH_PENDING)
-
-static void exit_to_usermode_loop(struct pt_regs *regs, u32 cached_flags)
-{
-	/*
-	 * In order to return to user mode, we need to have IRQs off with
-	 * none of EXIT_TO_USERMODE_LOOP_FLAGS set.  Several of these flags
-	 * can be set at any time on preemptible kernels if we have IRQs on,
-	 * so we need to loop.  Disabling preemption wouldn't help: doing the
-	 * work to clear some of the flags can sleep.
-	 */
-	while (true) {
-		/* We have work to do. */
-		local_irq_enable();
-
-		if (cached_flags & _TIF_NEED_RESCHED)
-			schedule();
-
-		if (cached_flags & _TIF_UPROBE)
-			uprobe_notify_resume(regs);
-
-		if (cached_flags & _TIF_PATCH_PENDING)
-			klp_update_patch_state(current);
-
-		/* deal with pending signal delivery */
-		if (cached_flags & _TIF_SIGPENDING)
-			do_signal(regs);
-
-		if (cached_flags & _TIF_NOTIFY_RESUME) {
-			clear_thread_flag(TIF_NOTIFY_RESUME);
-			tracehook_notify_resume(regs);
-			rseq_handle_notify_resume(NULL, regs);
-		}
-
-		if (cached_flags & _TIF_USER_RETURN_NOTIFY)
-			fire_user_return_notifiers();
-
-		/* Disable IRQs and retry */
-		local_irq_disable();
-
-		cached_flags = READ_ONCE(current_thread_info()->flags);
-
-		if (!(cached_flags & EXIT_TO_USERMODE_LOOP_FLAGS))
-			break;
-	}
-}
-
-static void __prepare_exit_to_usermode(struct pt_regs *regs)
-{
-	struct thread_info *ti = current_thread_info();
-	u32 cached_flags;
-
-	addr_limit_user_check();
-
-	lockdep_assert_irqs_disabled();
-	lockdep_sys_exit();
-
-	cached_flags = READ_ONCE(ti->flags);
-
-	if (unlikely(cached_flags & EXIT_TO_USERMODE_LOOP_FLAGS))
-		exit_to_usermode_loop(regs, cached_flags);
-
-	/* Reload ti->flags; we may have rescheduled above. */
-	cached_flags = READ_ONCE(ti->flags);
-
-	if (unlikely(cached_flags & _TIF_IO_BITMAP))
-		tss_update_io_bitmap();
-
-	fpregs_assert_state_consistent();
-	if (unlikely(cached_flags & _TIF_NEED_FPU_LOAD))
-		switch_fpu_return();
-
-#ifdef CONFIG_COMPAT
-	/*
-	 * Compat syscalls set TS_COMPAT.  Make sure we clear it before
-	 * returning to user mode.  We need to clear it *after* signal
-	 * handling, because syscall restart has a fixup for compat
-	 * syscalls.  The fixup is exercised by the ptrace_syscall_32
-	 * selftest.
-	 *
-	 * We also need to clear TS_REGS_POKED_I386: the 32-bit tracer
-	 * special case only applies after poking regs and before the
-	 * very next return to user mode.
-	 */
-	ti->status &= ~(TS_COMPAT|TS_I386_REGS_POKED);
-#endif
-}
-
-__visible noinstr void prepare_exit_to_usermode(struct pt_regs *regs)
-{
-	instrumentation_begin();
-	__prepare_exit_to_usermode(regs);
-	instrumentation_end();
-	exit_to_user_mode();
-}
-
-#define SYSCALL_EXIT_WORK_FLAGS				\
-	(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT |	\
-	 _TIF_SINGLESTEP | _TIF_SYSCALL_TRACEPOINT)
-
-static void syscall_slow_exit_work(struct pt_regs *regs, u32 cached_flags)
-{
-	bool step;
-
-	audit_syscall_exit(regs);
-
-	if (cached_flags & _TIF_SYSCALL_TRACEPOINT)
-		trace_sys_exit(regs, regs->ax);
-
-	/*
-	 * If TIF_SYSCALL_EMU is set, we only get here because of
-	 * TIF_SINGLESTEP (i.e. this is PTRACE_SYSEMU_SINGLESTEP).
-	 * We already reported this syscall instruction in
-	 * syscall_trace_enter().
-	 */
-	step = unlikely(
-		(cached_flags & (_TIF_SINGLESTEP | _TIF_SYSCALL_EMU))
-		== _TIF_SINGLESTEP);
-	if (step || cached_flags & _TIF_SYSCALL_TRACE)
-		tracehook_report_syscall_exit(regs, step);
-}
-
-static void __syscall_return_slowpath(struct pt_regs *regs)
-{
-	struct thread_info *ti = current_thread_info();
-	u32 cached_flags = READ_ONCE(ti->flags);
-
-	CT_WARN_ON(ct_state() != CONTEXT_KERNEL);
-
-	if (IS_ENABLED(CONFIG_PROVE_LOCKING) &&
-	    WARN(irqs_disabled(), "syscall %ld left IRQs disabled", regs->orig_ax))
-		local_irq_enable();
-
-	rseq_syscall(regs);
-
-	/*
-	 * First do one-time work.  If these work items are enabled, we
-	 * want to run them exactly once per syscall exit with IRQs on.
-	 */
-	if (unlikely(cached_flags & SYSCALL_EXIT_WORK_FLAGS))
-		syscall_slow_exit_work(regs, cached_flags);
-
-	local_irq_disable();
-	__prepare_exit_to_usermode(regs);
-}
-
-/*
- * Called with IRQs on and fully valid regs.  Returns with IRQs off in a
- * state such that we can immediately switch to user mode.
- */
-__visible noinstr void syscall_return_slowpath(struct pt_regs *regs)
-{
-	instrumentation_begin();
-	__syscall_return_slowpath(regs);
-	instrumentation_end();
-	exit_to_user_mode();
-}
-
 #ifdef CONFIG_X86_64
 __visible noinstr void do_syscall_64(unsigned long nr, struct pt_regs *regs)
 {
-	struct thread_info *ti;
+	nr = syscall_enter_from_user_mode(regs, nr);
 
-	enter_from_user_mode();
 	instrumentation_begin();
-
-	local_irq_enable();
-	ti = current_thread_info();
-	if (READ_ONCE(ti->flags) & _TIF_WORK_SYSCALL_ENTRY)
-		nr = syscall_trace_enter(regs);
-
 	if (likely(nr < NR_syscalls)) {
 		nr = array_index_nospec(nr, NR_syscalls);
 		regs->ax = sys_call_table[nr](regs);
@@ -365,64 +52,55 @@ __visible noinstr void do_syscall_64(unsigned long nr, struct pt_regs *regs)
 		regs->ax = x32_sys_call_table[nr](regs);
 #endif
 	}
-	__syscall_return_slowpath(regs);
-
 	instrumentation_end();
-	exit_to_user_mode();
+	syscall_exit_to_user_mode(regs);
 }
 #endif
 
 #if defined(CONFIG_X86_32) || defined(CONFIG_IA32_EMULATION)
-/*
- * Does a 32-bit syscall.  Called with IRQs on in CONTEXT_KERNEL.  Does
- * all entry and exit work and returns with IRQs off.  This function is
- * extremely hot in workloads that use it, and it's usually called from
- * do_fast_syscall_32, so forcibly inline it to improve performance.
- */
-static void do_syscall_32_irqs_on(struct pt_regs *regs)
+static __always_inline unsigned int syscall_32_enter(struct pt_regs *regs)
 {
-	struct thread_info *ti = current_thread_info();
 	unsigned int nr = (unsigned int)regs->orig_ax;
 
-#ifdef CONFIG_IA32_EMULATION
-	ti->status |= TS_COMPAT;
-#endif
-
-	if (READ_ONCE(ti->flags) & _TIF_WORK_SYSCALL_ENTRY) {
-		/*
-		 * Subtlety here: if ptrace pokes something larger than
-		 * 2^32-1 into orig_ax, this truncates it.  This may or
-		 * may not be necessary, but it matches the old asm
-		 * behavior.
-		 */
-		nr = syscall_trace_enter(regs);
-	}
+	if (IS_ENABLED(CONFIG_IA32_EMULATION))
+		current_thread_info()->status |= TS_COMPAT;
+	/*
+	 * Subtlety here: if ptrace pokes something larger than 2^32-1 into
+	 * orig_ax, the unsigned int return value truncates it.  This may
+	 * or may not be necessary, but it matches the old asm behavior.
+	 */
+	return (unsigned int)syscall_enter_from_user_mode(regs, nr);
+}
 
+/*
+ * Invoke a 32-bit syscall.  Called with IRQs on in CONTEXT_KERNEL.
+ */
+static __always_inline void do_syscall_32_irqs_on(struct pt_regs *regs,
+						  unsigned int nr)
+{
 	if (likely(nr < IA32_NR_syscalls)) {
+		instrumentation_begin();
 		nr = array_index_nospec(nr, IA32_NR_syscalls);
 		regs->ax = ia32_sys_call_table[nr](regs);
+		instrumentation_end();
 	}
-
-	__syscall_return_slowpath(regs);
 }
 
 /* Handles int $0x80 */
 __visible noinstr void do_int80_syscall_32(struct pt_regs *regs)
 {
-	enter_from_user_mode();
-	instrumentation_begin();
-
-	local_irq_enable();
-	do_syscall_32_irqs_on(regs);
+	unsigned int nr = syscall_32_enter(regs);
 
-	instrumentation_end();
-	exit_to_user_mode();
+	do_syscall_32_irqs_on(regs, nr);
+	syscall_exit_to_user_mode(regs);
 }
 
-static bool __do_fast_syscall_32(struct pt_regs *regs)
+static noinstr bool __do_fast_syscall_32(struct pt_regs *regs)
 {
+	unsigned int nr	= syscall_32_enter(regs);
 	int res;
 
+	instrumentation_begin();
 	/* Fetch EBP from where the vDSO stashed it. */
 	if (IS_ENABLED(CONFIG_X86_64)) {
 		/*
@@ -435,17 +113,18 @@ static bool __do_fast_syscall_32(struct pt_regs *regs)
 		res = get_user(*(u32 *)&regs->bp,
 		       (u32 __user __force *)(unsigned long)(u32)regs->sp);
 	}
+	instrumentation_end();
 
 	if (res) {
 		/* User code screwed up. */
 		regs->ax = -EFAULT;
-		local_irq_disable();
-		__prepare_exit_to_usermode(regs);
+		syscall_exit_to_user_mode(regs);
 		return false;
 	}
 
 	/* Now this is just like a normal syscall. */
-	do_syscall_32_irqs_on(regs);
+	do_syscall_32_irqs_on(regs, nr);
+	syscall_exit_to_user_mode(regs);
 	return true;
 }
 
@@ -458,7 +137,6 @@ __visible noinstr long do_fast_syscall_32(struct pt_regs *regs)
 	 */
 	unsigned long landing_pad = (unsigned long)current->mm->context.vdso +
 					vdso_image_32.sym_int80_landing_pad;
-	bool success;
 
 	/*
 	 * SYSENTER loses EIP, and even SYSCALL32 needs us to skip forward
@@ -467,17 +145,8 @@ __visible noinstr long do_fast_syscall_32(struct pt_regs *regs)
 	 */
 	regs->ip = landing_pad;
 
-	enter_from_user_mode();
-	instrumentation_begin();
-
-	local_irq_enable();
-	success = __do_fast_syscall_32(regs);
-
-	instrumentation_end();
-	exit_to_user_mode();
-
-	/* If it failed, keep it simple: use IRET. */
-	if (!success)
+	/* Invoke the syscall. If it failed, keep it simple: use IRET. */
+	if (!__do_fast_syscall_32(regs))
 		return 0;
 
 #ifdef CONFIG_X86_64
@@ -510,6 +179,18 @@ __visible noinstr long do_fast_syscall_32(struct pt_regs *regs)
 		(regs->flags & (X86_EFLAGS_RF | X86_EFLAGS_TF | X86_EFLAGS_VM)) == 0;
 #endif
 }
+
+/* Returns 0 to return using IRET or 1 to return using SYSEXIT/SYSRETL. */
+__visible noinstr long do_SYSENTER_32(struct pt_regs *regs)
+{
+	/* SYSENTER loses RSP, but the vDSO saved it in RBP. */
+	regs->sp = regs->bp;
+
+	/* SYSENTER clobbers EFLAGS.IF.  Assume it was set in usermode. */
+	regs->flags |= X86_EFLAGS_IF;
+
+	return do_fast_syscall_32(regs);
+}
 #endif
 
 SYSCALL_DEFINE0(ni_syscall)
@@ -517,195 +198,38 @@ SYSCALL_DEFINE0(ni_syscall)
 	return -ENOSYS;
 }
 
-/**
- * idtentry_enter_cond_rcu - Handle state tracking on idtentry with conditional
- *			     RCU handling
- * @regs:	Pointer to pt_regs of interrupted context
- *
- * Invokes:
- *  - lockdep irqflag state tracking as low level ASM entry disabled
- *    interrupts.
- *
- *  - Context tracking if the exception hit user mode.
- *
- *  - The hardirq tracer to keep the state consistent as low level ASM
- *    entry disabled interrupts.
- *
- * For kernel mode entries RCU handling is done conditional. If RCU is
- * watching then the only RCU requirement is to check whether the tick has
- * to be restarted. If RCU is not watching then rcu_irq_enter() has to be
- * invoked on entry and rcu_irq_exit() on exit.
- *
- * Avoiding the rcu_irq_enter/exit() calls is an optimization but also
- * solves the problem of kernel mode pagefaults which can schedule, which
- * is not possible after invoking rcu_irq_enter() without undoing it.
- *
- * For user mode entries enter_from_user_mode() must be invoked to
- * establish the proper context for NOHZ_FULL. Otherwise scheduling on exit
- * would not be possible.
- *
- * Returns: True if RCU has been adjusted on a kernel entry
- *	    False otherwise
- *
- * The return value must be fed into the rcu_exit argument of
- * idtentry_exit_cond_rcu().
- */
-bool noinstr idtentry_enter_cond_rcu(struct pt_regs *regs)
+noinstr bool idtentry_enter_nmi(struct pt_regs *regs)
 {
-	if (user_mode(regs)) {
-		enter_from_user_mode();
-		return false;
-	}
+	bool irq_state = lockdep_hardirqs_enabled();
 
-	/*
-	 * If this entry hit the idle task invoke rcu_irq_enter() whether
-	 * RCU is watching or not.
-	 *
-	 * Interupts can nest when the first interrupt invokes softirq
-	 * processing on return which enables interrupts.
-	 *
-	 * Scheduler ticks in the idle task can mark quiescent state and
-	 * terminate a grace period, if and only if the timer interrupt is
-	 * not nested into another interrupt.
-	 *
-	 * Checking for __rcu_is_watching() here would prevent the nesting
-	 * interrupt to invoke rcu_irq_enter(). If that nested interrupt is
-	 * the tick then rcu_flavor_sched_clock_irq() would wrongfully
-	 * assume that it is the first interupt and eventually claim
-	 * quiescient state and end grace periods prematurely.
-	 *
-	 * Unconditionally invoke rcu_irq_enter() so RCU state stays
-	 * consistent.
-	 *
-	 * TINY_RCU does not support EQS, so let the compiler eliminate
-	 * this part when enabled.
-	 */
-	if (!IS_ENABLED(CONFIG_TINY_RCU) && is_idle_task(current)) {
-		/*
-		 * If RCU is not watching then the same careful
-		 * sequence vs. lockdep and tracing is required
-		 * as in enter_from_user_mode().
-		 */
-		lockdep_hardirqs_off(CALLER_ADDR0);
-		rcu_irq_enter();
-		instrumentation_begin();
-		trace_hardirqs_off_finish();
-		instrumentation_end();
-
-		return true;
-	}
+	__nmi_enter();
+	lockdep_hardirqs_off(CALLER_ADDR0);
+	lockdep_hardirq_enter();
+	rcu_nmi_enter();
 
-	/*
-	 * If RCU is watching then RCU only wants to check whether it needs
-	 * to restart the tick in NOHZ mode. rcu_irq_enter_check_tick()
-	 * already contains a warning when RCU is not watching, so no point
-	 * in having another one here.
-	 */
 	instrumentation_begin();
-	rcu_irq_enter_check_tick();
-	/* Use the combo lockdep/tracing function */
-	trace_hardirqs_off();
+	trace_hardirqs_off_finish();
+	ftrace_nmi_enter();
 	instrumentation_end();
 
-	return false;
+	return irq_state;
 }
 
-static void idtentry_exit_cond_resched(struct pt_regs *regs, bool may_sched)
+noinstr void idtentry_exit_nmi(struct pt_regs *regs, bool restore)
 {
-	if (may_sched && !preempt_count()) {
-		/* Sanity check RCU and thread stack */
-		rcu_irq_exit_check_preempt();
-		if (IS_ENABLED(CONFIG_DEBUG_ENTRY))
-			WARN_ON_ONCE(!on_thread_stack());
-		if (need_resched())
-			preempt_schedule_irq();
-	}
-	/* Covers both tracing and lockdep */
-	trace_hardirqs_on();
-}
-
-/**
- * idtentry_exit_cond_rcu - Handle return from exception with conditional RCU
- *			    handling
- * @regs:	Pointer to pt_regs (exception entry regs)
- * @rcu_exit:	Invoke rcu_irq_exit() if true
- *
- * Depending on the return target (kernel/user) this runs the necessary
- * preemption and work checks if possible and reguired and returns to
- * the caller with interrupts disabled and no further work pending.
- *
- * This is the last action before returning to the low level ASM code which
- * just needs to return to the appropriate context.
- *
- * Counterpart to idtentry_enter_cond_rcu(). The return value of the entry
- * function must be fed into the @rcu_exit argument.
- */
-void noinstr idtentry_exit_cond_rcu(struct pt_regs *regs, bool rcu_exit)
-{
-	lockdep_assert_irqs_disabled();
-
-	/* Check whether this returns to user mode */
-	if (user_mode(regs)) {
-		prepare_exit_to_usermode(regs);
-	} else if (regs->flags & X86_EFLAGS_IF) {
-		/*
-		 * If RCU was not watching on entry this needs to be done
-		 * carefully and needs the same ordering of lockdep/tracing
-		 * and RCU as the return to user mode path.
-		 */
-		if (rcu_exit) {
-			instrumentation_begin();
-			/* Tell the tracer that IRET will enable interrupts */
-			trace_hardirqs_on_prepare();
-			lockdep_hardirqs_on_prepare(CALLER_ADDR0);
-			instrumentation_end();
-			rcu_irq_exit();
-			lockdep_hardirqs_on(CALLER_ADDR0);
-			return;
-		}
-
-		instrumentation_begin();
-		idtentry_exit_cond_resched(regs, IS_ENABLED(CONFIG_PREEMPTION));
-		instrumentation_end();
-	} else {
-		/*
-		 * IRQ flags state is correct already. Just tell RCU if it
-		 * was not watching on entry.
-		 */
-		if (rcu_exit)
-			rcu_irq_exit();
+	instrumentation_begin();
+	ftrace_nmi_exit();
+	if (restore) {
+		trace_hardirqs_on_prepare();
+		lockdep_hardirqs_on_prepare(CALLER_ADDR0);
 	}
-}
-
-/**
- * idtentry_enter_user - Handle state tracking on idtentry from user mode
- * @regs:	Pointer to pt_regs of interrupted context
- *
- * Invokes enter_from_user_mode() to establish the proper context for
- * NOHZ_FULL. Otherwise scheduling on exit would not be possible.
- */
-void noinstr idtentry_enter_user(struct pt_regs *regs)
-{
-	enter_from_user_mode();
-}
-
-/**
- * idtentry_exit_user - Handle return from exception to user mode
- * @regs:	Pointer to pt_regs (exception entry regs)
- *
- * Runs the necessary preemption and work checks and returns to the caller
- * with interrupts disabled and no further work pending.
- *
- * This is the last action before returning to the low level ASM code which
- * just needs to return to the appropriate context.
- *
- * Counterpart to idtentry_enter_user().
- */
-void noinstr idtentry_exit_user(struct pt_regs *regs)
-{
-	lockdep_assert_irqs_disabled();
+	instrumentation_end();
 
-	prepare_exit_to_usermode(regs);
+	rcu_nmi_exit();
+	lockdep_hardirq_exit();
+	if (restore)
+		lockdep_hardirqs_on(CALLER_ADDR0);
+	__nmi_exit();
 }
 
 #ifdef CONFIG_XEN_PV
@@ -757,9 +281,10 @@ static void __xen_pv_evtchn_do_upcall(void)
 __visible noinstr void xen_pv_evtchn_do_upcall(struct pt_regs *regs)
 {
 	struct pt_regs *old_regs;
-	bool inhcall, rcu_exit;
+	bool inhcall;
+	irqentry_state_t state;
 
-	rcu_exit = idtentry_enter_cond_rcu(regs);
+	state = irqentry_enter(regs);
 	old_regs = set_irq_regs(regs);
 
 	instrumentation_begin();
@@ -769,13 +294,13 @@ __visible noinstr void xen_pv_evtchn_do_upcall(struct pt_regs *regs)
 	set_irq_regs(old_regs);
 
 	inhcall = get_and_clear_inhcall();
-	if (inhcall && !WARN_ON_ONCE(rcu_exit)) {
+	if (inhcall && !WARN_ON_ONCE(state.exit_rcu)) {
 		instrumentation_begin();
-		idtentry_exit_cond_resched(regs, true);
+		irqentry_exit_cond_resched();
 		instrumentation_end();
 		restore_inhcall(inhcall);
 	} else {
-		idtentry_exit_cond_rcu(regs, rcu_exit);
+		irqentry_exit(regs, state);
 	}
 }
 #endif /* CONFIG_XEN_PV */
diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S
index 024d7d276cd4..29b7d52143e9 100644
--- a/arch/x86/entry/entry_32.S
+++ b/arch/x86/entry/entry_32.S
@@ -846,7 +846,7 @@ SYM_CODE_START(ret_from_fork)
 2:
 	/* When we fork, we trace the syscall return in the child, too. */
 	movl    %esp, %eax
-	call    syscall_return_slowpath
+	call    syscall_exit_to_user_mode
 	jmp     .Lsyscall_32_done
 
 	/* kernel thread */
@@ -854,7 +854,7 @@ SYM_CODE_START(ret_from_fork)
 	CALL_NOSPEC ebx
 	/*
 	 * A kernel thread is allowed to return here after successfully
-	 * calling do_execve().  Exit to userspace to complete the execve()
+	 * calling kernel_execve().  Exit to userspace to complete the execve()
 	 * syscall.
 	 */
 	movl	$0, PT_EAX(%esp)
@@ -933,9 +933,8 @@ SYM_FUNC_START(entry_SYSENTER_32)
 
 .Lsysenter_past_esp:
 	pushl	$__USER_DS		/* pt_regs->ss */
-	pushl	%ebp			/* pt_regs->sp (stashed in bp) */
+	pushl	$0			/* pt_regs->sp (placeholder) */
 	pushfl				/* pt_regs->flags (except IF = 0) */
-	orl	$X86_EFLAGS_IF, (%esp)	/* Fix IF */
 	pushl	$__USER_CS		/* pt_regs->cs */
 	pushl	$0			/* pt_regs->ip = 0 (placeholder) */
 	pushl	%eax			/* pt_regs->orig_ax */
@@ -965,7 +964,7 @@ SYM_FUNC_START(entry_SYSENTER_32)
 .Lsysenter_flags_fixed:
 
 	movl	%esp, %eax
-	call	do_fast_syscall_32
+	call	do_SYSENTER_32
 	/* XEN PV guests always use IRET path */
 	ALTERNATIVE "testl %eax, %eax; jz .Lsyscall_32_done", \
 		    "jmp .Lsyscall_32_done", X86_FEATURE_XENPV
diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S
index d2a00c97e53f..70dea9337816 100644
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -38,6 +38,7 @@
 #include <asm/frame.h>
 #include <asm/trapnr.h>
 #include <asm/nospec-branch.h>
+#include <asm/fsgsbase.h>
 #include <linux/err.h>
 
 #include "calling.h"
@@ -283,7 +284,7 @@ SYM_CODE_START(ret_from_fork)
 2:
 	UNWIND_HINT_REGS
 	movq	%rsp, %rdi
-	call	syscall_return_slowpath	/* returns with IRQs disabled */
+	call	syscall_exit_to_user_mode	/* returns with IRQs disabled */
 	jmp	swapgs_restore_regs_and_return_to_usermode
 
 1:
@@ -293,7 +294,7 @@ SYM_CODE_START(ret_from_fork)
 	CALL_NOSPEC rbx
 	/*
 	 * A kernel thread is allowed to return here after successfully
-	 * calling do_execve().  Exit to userspace to complete the execve()
+	 * calling kernel_execve().  Exit to userspace to complete the execve()
 	 * syscall.
 	 */
 	movq	$0, RAX(%rsp)
@@ -426,10 +427,7 @@ SYM_CODE_START(\asmsym)
 	testb	$3, CS-ORIG_RAX(%rsp)
 	jnz	.Lfrom_usermode_switch_stack_\@
 
-	/*
-	 * paranoid_entry returns SWAPGS flag for paranoid_exit in EBX.
-	 * EBX == 0 -> SWAPGS, EBX == 1 -> no SWAPGS
-	 */
+	/* paranoid_entry returns GS information for paranoid_exit in EBX. */
 	call	paranoid_entry
 
 	UNWIND_HINT_REGS
@@ -458,10 +456,7 @@ SYM_CODE_START(\asmsym)
 	UNWIND_HINT_IRET_REGS offset=8
 	ASM_CLAC
 
-	/*
-	 * paranoid_entry returns SWAPGS flag for paranoid_exit in EBX.
-	 * EBX == 0 -> SWAPGS, EBX == 1 -> no SWAPGS
-	 */
+	/* paranoid_entry returns GS information for paranoid_exit in EBX. */
 	call	paranoid_entry
 	UNWIND_HINT_REGS
 
@@ -798,24 +793,21 @@ SYM_CODE_END(xen_failsafe_callback)
 #endif /* CONFIG_XEN_PV */
 
 /*
- * Save all registers in pt_regs, and switch gs if needed.
- * Use slow, but surefire "are we in kernel?" check.
- * Return: ebx=0: need swapgs on exit, ebx=1: otherwise
+ * Save all registers in pt_regs. Return GSBASE related information
+ * in EBX depending on the availability of the FSGSBASE instructions:
+ *
+ * FSGSBASE	R/EBX
+ *     N        0 -> SWAPGS on exit
+ *              1 -> no SWAPGS on exit
+ *
+ *     Y        GSBASE value at entry, must be restored in paranoid_exit
  */
 SYM_CODE_START_LOCAL(paranoid_entry)
 	UNWIND_HINT_FUNC
 	cld
 	PUSH_AND_CLEAR_REGS save_ret=1
 	ENCODE_FRAME_POINTER 8
-	movl	$1, %ebx
-	movl	$MSR_GS_BASE, %ecx
-	rdmsr
-	testl	%edx, %edx
-	js	1f				/* negative -> in kernel */
-	SWAPGS
-	xorl	%ebx, %ebx
 
-1:
 	/*
 	 * Always stash CR3 in %r14.  This value will be restored,
 	 * verbatim, at exit.  Needed if paranoid_entry interrupted
@@ -825,16 +817,60 @@ SYM_CODE_START_LOCAL(paranoid_entry)
 	 * This is also why CS (stashed in the "iret frame" by the
 	 * hardware at entry) can not be used: this may be a return
 	 * to kernel code, but with a user CR3 value.
+	 *
+	 * Switching CR3 does not depend on kernel GSBASE so it can
+	 * be done before switching to the kernel GSBASE. This is
+	 * required for FSGSBASE because the kernel GSBASE has to
+	 * be retrieved from a kernel internal table.
 	 */
 	SAVE_AND_SWITCH_TO_KERNEL_CR3 scratch_reg=%rax save_reg=%r14
 
 	/*
+	 * Handling GSBASE depends on the availability of FSGSBASE.
+	 *
+	 * Without FSGSBASE the kernel enforces that negative GSBASE
+	 * values indicate kernel GSBASE. With FSGSBASE no assumptions
+	 * can be made about the GSBASE value when entering from user
+	 * space.
+	 */
+	ALTERNATIVE "jmp .Lparanoid_entry_checkgs", "", X86_FEATURE_FSGSBASE
+
+	/*
+	 * Read the current GSBASE and store it in %rbx unconditionally,
+	 * retrieve and set the current CPUs kernel GSBASE. The stored value
+	 * has to be restored in paranoid_exit unconditionally.
+	 *
+	 * The MSR write ensures that no subsequent load is based on a
+	 * mispredicted GSBASE. No extra FENCE required.
+	 */
+	SAVE_AND_SET_GSBASE scratch_reg=%rax save_reg=%rbx
+	ret
+
+.Lparanoid_entry_checkgs:
+	/* EBX = 1 -> kernel GSBASE active, no restore required */
+	movl	$1, %ebx
+	/*
+	 * The kernel-enforced convention is a negative GSBASE indicates
+	 * a kernel value. No SWAPGS needed on entry and exit.
+	 */
+	movl	$MSR_GS_BASE, %ecx
+	rdmsr
+	testl	%edx, %edx
+	jns	.Lparanoid_entry_swapgs
+	ret
+
+.Lparanoid_entry_swapgs:
+	SWAPGS
+
+	/*
 	 * The above SAVE_AND_SWITCH_TO_KERNEL_CR3 macro doesn't do an
 	 * unconditional CR3 write, even in the PTI case.  So do an lfence
 	 * to prevent GS speculation, regardless of whether PTI is enabled.
 	 */
 	FENCE_SWAPGS_KERNEL_ENTRY
 
+	/* EBX = 0 -> SWAPGS required on exit */
+	xorl	%ebx, %ebx
 	ret
 SYM_CODE_END(paranoid_entry)
 
@@ -845,23 +881,45 @@ SYM_CODE_END(paranoid_entry)
  *
  * We may be returning to very strange contexts (e.g. very early
  * in syscall entry), so checking for preemption here would
- * be complicated.  Fortunately, we there's no good reason
- * to try to handle preemption here.
+ * be complicated.  Fortunately, there's no good reason to try
+ * to handle preemption here.
+ *
+ * R/EBX contains the GSBASE related information depending on the
+ * availability of the FSGSBASE instructions:
+ *
+ * FSGSBASE	R/EBX
+ *     N        0 -> SWAPGS on exit
+ *              1 -> no SWAPGS on exit
  *
- * On entry, ebx is "no swapgs" flag (1: don't need swapgs, 0: need it)
+ *     Y        User space GSBASE, must be restored unconditionally
  */
 SYM_CODE_START_LOCAL(paranoid_exit)
 	UNWIND_HINT_REGS
-	testl	%ebx, %ebx			/* swapgs needed? */
-	jnz	.Lparanoid_exit_no_swapgs
-	/* Always restore stashed CR3 value (see paranoid_entry) */
-	RESTORE_CR3	scratch_reg=%rbx save_reg=%r14
+	/*
+	 * The order of operations is important. RESTORE_CR3 requires
+	 * kernel GSBASE.
+	 *
+	 * NB to anyone to try to optimize this code: this code does
+	 * not execute at all for exceptions from user mode. Those
+	 * exceptions go through error_exit instead.
+	 */
+	RESTORE_CR3	scratch_reg=%rax save_reg=%r14
+
+	/* Handle the three GSBASE cases */
+	ALTERNATIVE "jmp .Lparanoid_exit_checkgs", "", X86_FEATURE_FSGSBASE
+
+	/* With FSGSBASE enabled, unconditionally restore GSBASE */
+	wrgsbase	%rbx
+	jmp		restore_regs_and_return_to_kernel
+
+.Lparanoid_exit_checkgs:
+	/* On non-FSGSBASE systems, conditionally do SWAPGS */
+	testl		%ebx, %ebx
+	jnz		restore_regs_and_return_to_kernel
+
+	/* We are returning to a context with user GSBASE */
 	SWAPGS_UNSAFE_STACK
-	jmp	restore_regs_and_return_to_kernel
-.Lparanoid_exit_no_swapgs:
-	/* Always restore stashed CR3 value (see paranoid_entry) */
-	RESTORE_CR3	scratch_reg=%rbx save_reg=%r14
-	jmp restore_regs_and_return_to_kernel
+	jmp		restore_regs_and_return_to_kernel
 SYM_CODE_END(paranoid_exit)
 
 /*
@@ -1266,10 +1324,27 @@ end_repeat_nmi:
 	/* Always restore stashed CR3 value (see paranoid_entry) */
 	RESTORE_CR3 scratch_reg=%r15 save_reg=%r14
 
-	testl	%ebx, %ebx			/* swapgs needed? */
+	/*
+	 * The above invocation of paranoid_entry stored the GSBASE
+	 * related information in R/EBX depending on the availability
+	 * of FSGSBASE.
+	 *
+	 * If FSGSBASE is enabled, restore the saved GSBASE value
+	 * unconditionally, otherwise take the conditional SWAPGS path.
+	 */
+	ALTERNATIVE "jmp nmi_no_fsgsbase", "", X86_FEATURE_FSGSBASE
+
+	wrgsbase	%rbx
+	jmp	nmi_restore
+
+nmi_no_fsgsbase:
+	/* EBX == 0 -> invoke SWAPGS */
+	testl	%ebx, %ebx
 	jnz	nmi_restore
+
 nmi_swapgs:
 	SWAPGS_UNSAFE_STACK
+
 nmi_restore:
 	POP_REGS
 
diff --git a/arch/x86/entry/entry_64_compat.S b/arch/x86/entry/entry_64_compat.S
index 0f974ae01e62..541fdaf64045 100644
--- a/arch/x86/entry/entry_64_compat.S
+++ b/arch/x86/entry/entry_64_compat.S
@@ -57,29 +57,30 @@ SYM_CODE_START(entry_SYSENTER_compat)
 
 	movq	PER_CPU_VAR(cpu_current_top_of_stack), %rsp
 
-	/*
-	 * User tracing code (ptrace or signal handlers) might assume that
-	 * the saved RAX contains a 32-bit number when we're invoking a 32-bit
-	 * syscall.  Just in case the high bits are nonzero, zero-extend
-	 * the syscall number.  (This could almost certainly be deleted
-	 * with no ill effects.)
-	 */
-	movl	%eax, %eax
-
 	/* Construct struct pt_regs on stack */
 	pushq	$__USER32_DS		/* pt_regs->ss */
-	pushq	%rbp			/* pt_regs->sp (stashed in bp) */
+	pushq	$0			/* pt_regs->sp = 0 (placeholder) */
 
 	/*
 	 * Push flags.  This is nasty.  First, interrupts are currently
-	 * off, but we need pt_regs->flags to have IF set.  Second, even
-	 * if TF was set when SYSENTER started, it's clear by now.  We fix
-	 * that later using TIF_SINGLESTEP.
+	 * off, but we need pt_regs->flags to have IF set.  Second, if TS
+	 * was set in usermode, it's still set, and we're singlestepping
+	 * through this code.  do_SYSENTER_32() will fix up IF.
 	 */
 	pushfq				/* pt_regs->flags (except IF = 0) */
-	orl	$X86_EFLAGS_IF, (%rsp)	/* Fix saved flags */
 	pushq	$__USER32_CS		/* pt_regs->cs */
 	pushq	$0			/* pt_regs->ip = 0 (placeholder) */
+SYM_INNER_LABEL(entry_SYSENTER_compat_after_hwframe, SYM_L_GLOBAL)
+
+	/*
+	 * User tracing code (ptrace or signal handlers) might assume that
+	 * the saved RAX contains a 32-bit number when we're invoking a 32-bit
+	 * syscall.  Just in case the high bits are nonzero, zero-extend
+	 * the syscall number.  (This could almost certainly be deleted
+	 * with no ill effects.)
+	 */
+	movl	%eax, %eax
+
 	pushq	%rax			/* pt_regs->orig_ax */
 	pushq	%rdi			/* pt_regs->di */
 	pushq	%rsi			/* pt_regs->si */
@@ -135,7 +136,7 @@ SYM_CODE_START(entry_SYSENTER_compat)
 .Lsysenter_flags_fixed:
 
 	movq	%rsp, %rdi
-	call	do_fast_syscall_32
+	call	do_SYSENTER_32
 	/* XEN PV guests always use IRET path */
 	ALTERNATIVE "testl %eax, %eax; jz swapgs_restore_regs_and_return_to_usermode", \
 		    "jmp swapgs_restore_regs_and_return_to_usermode", X86_FEATURE_XENPV
diff --git a/arch/x86/entry/syscalls/syscall_32.tbl b/arch/x86/entry/syscalls/syscall_32.tbl
index d8f8a1a69ed1..3f0c6546b47c 100644
--- a/arch/x86/entry/syscalls/syscall_32.tbl
+++ b/arch/x86/entry/syscalls/syscall_32.tbl
@@ -440,6 +440,7 @@
 433	i386	fspick			sys_fspick
 434	i386	pidfd_open		sys_pidfd_open
 435	i386	clone3			sys_clone3
+436	i386	close_range		sys_close_range
 437	i386	openat2			sys_openat2
 438	i386	pidfd_getfd		sys_pidfd_getfd
 439	i386	faccessat2		sys_faccessat2
diff --git a/arch/x86/entry/syscalls/syscall_64.tbl b/arch/x86/entry/syscalls/syscall_64.tbl
index 78847b32e137..f8637c2c863d 100644
--- a/arch/x86/entry/syscalls/syscall_64.tbl
+++ b/arch/x86/entry/syscalls/syscall_64.tbl
@@ -357,6 +357,7 @@
 433	common	fspick			sys_fspick
 434	common	pidfd_open		sys_pidfd_open
 435	common	clone3			sys_clone3
+436	common	close_range		sys_close_range
 437	common	openat2			sys_openat2
 438	common	pidfd_getfd		sys_pidfd_getfd
 439	common	faccessat2		sys_faccessat2
diff --git a/arch/x86/entry/vdso/vma.c b/arch/x86/entry/vdso/vma.c
index ea7c1f0b79df..9185cb1d13b9 100644
--- a/arch/x86/entry/vdso/vma.c
+++ b/arch/x86/entry/vdso/vma.c
@@ -144,8 +144,7 @@ int vdso_join_timens(struct task_struct *task, struct time_namespace *ns)
 	struct mm_struct *mm = task->mm;
 	struct vm_area_struct *vma;
 
-	if (mmap_write_lock_killable(mm))
-		return -EINTR;
+	mmap_read_lock(mm);
 
 	for (vma = mm->mmap; vma; vma = vma->vm_next) {
 		unsigned long size = vma->vm_end - vma->vm_start;
@@ -154,7 +153,7 @@ int vdso_join_timens(struct task_struct *task, struct time_namespace *ns)
 			zap_page_range(vma, vma->vm_start, size);
 	}
 
-	mmap_write_unlock(mm);
+	mmap_read_unlock(mm);
 	return 0;
 }
 #else
diff --git a/arch/x86/events/Makefile b/arch/x86/events/Makefile
index 12c42eba77ec..9933c0e8e97a 100644
--- a/arch/x86/events/Makefile
+++ b/arch/x86/events/Makefile
@@ -1,6 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0-only
 obj-y					+= core.o probe.o
-obj-$(PERF_EVENTS_INTEL_RAPL)		+= rapl.o
+obj-$(CONFIG_PERF_EVENTS_INTEL_RAPL)	+= rapl.o
 obj-y					+= amd/
 obj-$(CONFIG_X86_LOCAL_APIC)            += msr.o
 obj-$(CONFIG_CPU_SUP_INTEL)		+= intel/
diff --git a/arch/x86/events/amd/power.c b/arch/x86/events/amd/power.c
index 43b09e9c93a2..16a2369c586e 100644
--- a/arch/x86/events/amd/power.c
+++ b/arch/x86/events/amd/power.c
@@ -13,10 +13,6 @@
 #include <asm/cpu_device_id.h>
 #include "../perf_event.h"
 
-#define MSR_F15H_CU_PWR_ACCUMULATOR     0xc001007a
-#define MSR_F15H_CU_MAX_PWR_ACCUMULATOR 0xc001007b
-#define MSR_F15H_PTSC			0xc0010280
-
 /* Event code: LSB 8 bits, passed in attr->config any other bit is reserved. */
 #define AMD_POWER_EVENT_MASK		0xFFULL
 
diff --git a/arch/x86/events/core.c b/arch/x86/events/core.c
index 4103665c6e03..1cbf57dc2ac8 100644
--- a/arch/x86/events/core.c
+++ b/arch/x86/events/core.c
@@ -71,10 +71,9 @@ u64 x86_perf_event_update(struct perf_event *event)
 	struct hw_perf_event *hwc = &event->hw;
 	int shift = 64 - x86_pmu.cntval_bits;
 	u64 prev_raw_count, new_raw_count;
-	int idx = hwc->idx;
 	u64 delta;
 
-	if (idx == INTEL_PMC_IDX_FIXED_BTS)
+	if (unlikely(!hwc->event_base))
 		return 0;
 
 	/*
@@ -359,6 +358,7 @@ void x86_release_hardware(void)
 	if (atomic_dec_and_mutex_lock(&pmc_refcount, &pmc_reserve_mutex)) {
 		release_pmc_hardware();
 		release_ds_buffers();
+		release_lbr_buffers();
 		mutex_unlock(&pmc_reserve_mutex);
 	}
 }
@@ -1097,22 +1097,31 @@ static inline void x86_assign_hw_event(struct perf_event *event,
 				struct cpu_hw_events *cpuc, int i)
 {
 	struct hw_perf_event *hwc = &event->hw;
+	int idx;
 
-	hwc->idx = cpuc->assign[i];
+	idx = hwc->idx = cpuc->assign[i];
 	hwc->last_cpu = smp_processor_id();
 	hwc->last_tag = ++cpuc->tags[i];
 
-	if (hwc->idx == INTEL_PMC_IDX_FIXED_BTS) {
+	switch (hwc->idx) {
+	case INTEL_PMC_IDX_FIXED_BTS:
+	case INTEL_PMC_IDX_FIXED_VLBR:
 		hwc->config_base = 0;
 		hwc->event_base	= 0;
-	} else if (hwc->idx >= INTEL_PMC_IDX_FIXED) {
+		break;
+
+	case INTEL_PMC_IDX_FIXED ... INTEL_PMC_IDX_FIXED_BTS-1:
 		hwc->config_base = MSR_ARCH_PERFMON_FIXED_CTR_CTRL;
-		hwc->event_base = MSR_ARCH_PERFMON_FIXED_CTR0 + (hwc->idx - INTEL_PMC_IDX_FIXED);
-		hwc->event_base_rdpmc = (hwc->idx - INTEL_PMC_IDX_FIXED) | 1<<30;
-	} else {
+		hwc->event_base = MSR_ARCH_PERFMON_FIXED_CTR0 +
+				(idx - INTEL_PMC_IDX_FIXED);
+		hwc->event_base_rdpmc = (idx - INTEL_PMC_IDX_FIXED) | 1<<30;
+		break;
+
+	default:
 		hwc->config_base = x86_pmu_config_addr(hwc->idx);
 		hwc->event_base  = x86_pmu_event_addr(hwc->idx);
 		hwc->event_base_rdpmc = x86_pmu_rdpmc_index(hwc->idx);
+		break;
 	}
 }
 
@@ -1233,7 +1242,7 @@ int x86_perf_event_set_period(struct perf_event *event)
 	s64 period = hwc->sample_period;
 	int ret = 0, idx = hwc->idx;
 
-	if (idx == INTEL_PMC_IDX_FIXED_BTS)
+	if (unlikely(!hwc->event_base))
 		return 0;
 
 	/*
@@ -2363,7 +2372,6 @@ static struct pmu pmu = {
 
 	.event_idx		= x86_pmu_event_idx,
 	.sched_task		= x86_pmu_sched_task,
-	.task_ctx_size          = sizeof(struct x86_perf_task_context),
 	.swap_task_ctx		= x86_pmu_swap_task_ctx,
 	.check_period		= x86_pmu_check_period,
 
diff --git a/arch/x86/events/intel/core.c b/arch/x86/events/intel/core.c
index ca35c8b5ee10..50963472ee85 100644
--- a/arch/x86/events/intel/core.c
+++ b/arch/x86/events/intel/core.c
@@ -2136,8 +2136,35 @@ static inline void intel_pmu_ack_status(u64 ack)
 	wrmsrl(MSR_CORE_PERF_GLOBAL_OVF_CTRL, ack);
 }
 
-static void intel_pmu_disable_fixed(struct hw_perf_event *hwc)
+static inline bool event_is_checkpointed(struct perf_event *event)
 {
+	return unlikely(event->hw.config & HSW_IN_TX_CHECKPOINTED) != 0;
+}
+
+static inline void intel_set_masks(struct perf_event *event, int idx)
+{
+	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
+
+	if (event->attr.exclude_host)
+		__set_bit(idx, (unsigned long *)&cpuc->intel_ctrl_guest_mask);
+	if (event->attr.exclude_guest)
+		__set_bit(idx, (unsigned long *)&cpuc->intel_ctrl_host_mask);
+	if (event_is_checkpointed(event))
+		__set_bit(idx, (unsigned long *)&cpuc->intel_cp_status);
+}
+
+static inline void intel_clear_masks(struct perf_event *event, int idx)
+{
+	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
+
+	__clear_bit(idx, (unsigned long *)&cpuc->intel_ctrl_guest_mask);
+	__clear_bit(idx, (unsigned long *)&cpuc->intel_ctrl_host_mask);
+	__clear_bit(idx, (unsigned long *)&cpuc->intel_cp_status);
+}
+
+static void intel_pmu_disable_fixed(struct perf_event *event)
+{
+	struct hw_perf_event *hwc = &event->hw;
 	int idx = hwc->idx - INTEL_PMC_IDX_FIXED;
 	u64 ctrl_val, mask;
 
@@ -2148,30 +2175,22 @@ static void intel_pmu_disable_fixed(struct hw_perf_event *hwc)
 	wrmsrl(hwc->config_base, ctrl_val);
 }
 
-static inline bool event_is_checkpointed(struct perf_event *event)
-{
-	return (event->hw.config & HSW_IN_TX_CHECKPOINTED) != 0;
-}
-
 static void intel_pmu_disable_event(struct perf_event *event)
 {
 	struct hw_perf_event *hwc = &event->hw;
-	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
+	int idx = hwc->idx;
 
-	if (unlikely(hwc->idx == INTEL_PMC_IDX_FIXED_BTS)) {
+	if (idx < INTEL_PMC_IDX_FIXED) {
+		intel_clear_masks(event, idx);
+		x86_pmu_disable_event(event);
+	} else if (idx < INTEL_PMC_IDX_FIXED_BTS) {
+		intel_clear_masks(event, idx);
+		intel_pmu_disable_fixed(event);
+	} else if (idx == INTEL_PMC_IDX_FIXED_BTS) {
 		intel_pmu_disable_bts();
 		intel_pmu_drain_bts_buffer();
-		return;
-	}
-
-	cpuc->intel_ctrl_guest_mask &= ~(1ull << hwc->idx);
-	cpuc->intel_ctrl_host_mask &= ~(1ull << hwc->idx);
-	cpuc->intel_cp_status &= ~(1ull << hwc->idx);
-
-	if (unlikely(hwc->config_base == MSR_ARCH_PERFMON_FIXED_CTR_CTRL))
-		intel_pmu_disable_fixed(hwc);
-	else
-		x86_pmu_disable_event(event);
+	} else if (idx == INTEL_PMC_IDX_FIXED_VLBR)
+		intel_clear_masks(event, idx);
 
 	/*
 	 * Needs to be called after x86_pmu_disable_event,
@@ -2238,33 +2257,23 @@ static void intel_pmu_enable_fixed(struct perf_event *event)
 static void intel_pmu_enable_event(struct perf_event *event)
 {
 	struct hw_perf_event *hwc = &event->hw;
-	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
-
-	if (unlikely(hwc->idx == INTEL_PMC_IDX_FIXED_BTS)) {
-		if (!__this_cpu_read(cpu_hw_events.enabled))
-			return;
-
-		intel_pmu_enable_bts(hwc->config);
-		return;
-	}
-
-	if (event->attr.exclude_host)
-		cpuc->intel_ctrl_guest_mask |= (1ull << hwc->idx);
-	if (event->attr.exclude_guest)
-		cpuc->intel_ctrl_host_mask |= (1ull << hwc->idx);
-
-	if (unlikely(event_is_checkpointed(event)))
-		cpuc->intel_cp_status |= (1ull << hwc->idx);
+	int idx = hwc->idx;
 
 	if (unlikely(event->attr.precise_ip))
 		intel_pmu_pebs_enable(event);
 
-	if (unlikely(hwc->config_base == MSR_ARCH_PERFMON_FIXED_CTR_CTRL)) {
+	if (idx < INTEL_PMC_IDX_FIXED) {
+		intel_set_masks(event, idx);
+		__x86_pmu_enable_event(hwc, ARCH_PERFMON_EVENTSEL_ENABLE);
+	} else if (idx < INTEL_PMC_IDX_FIXED_BTS) {
+		intel_set_masks(event, idx);
 		intel_pmu_enable_fixed(event);
-		return;
-	}
-
-	__x86_pmu_enable_event(hwc, ARCH_PERFMON_EVENTSEL_ENABLE);
+	} else if (idx == INTEL_PMC_IDX_FIXED_BTS) {
+		if (!__this_cpu_read(cpu_hw_events.enabled))
+			return;
+		intel_pmu_enable_bts(hwc->config);
+	} else if (idx == INTEL_PMC_IDX_FIXED_VLBR)
+		intel_set_masks(event, idx);
 }
 
 static void intel_pmu_add_event(struct perf_event *event)
@@ -2614,6 +2623,20 @@ intel_bts_constraints(struct perf_event *event)
 	return NULL;
 }
 
+/*
+ * Note: matches a fake event, like Fixed2.
+ */
+static struct event_constraint *
+intel_vlbr_constraints(struct perf_event *event)
+{
+	struct event_constraint *c = &vlbr_constraint;
+
+	if (unlikely(constraint_match(c, event->hw.config)))
+		return c;
+
+	return NULL;
+}
+
 static int intel_alt_er(int idx, u64 config)
 {
 	int alt_idx = idx;
@@ -2804,6 +2827,10 @@ __intel_get_event_constraints(struct cpu_hw_events *cpuc, int idx,
 {
 	struct event_constraint *c;
 
+	c = intel_vlbr_constraints(event);
+	if (c)
+		return c;
+
 	c = intel_bts_constraints(event);
 	if (c)
 		return c;
@@ -3951,6 +3978,11 @@ static __initconst const struct x86_pmu core_pmu = {
 	.cpu_dead		= intel_pmu_cpu_dead,
 
 	.check_period		= intel_pmu_check_period,
+
+	.lbr_reset		= intel_pmu_lbr_reset_64,
+	.lbr_read		= intel_pmu_lbr_read_64,
+	.lbr_save		= intel_pmu_lbr_save,
+	.lbr_restore		= intel_pmu_lbr_restore,
 };
 
 static __initconst const struct x86_pmu intel_pmu = {
@@ -3996,6 +4028,11 @@ static __initconst const struct x86_pmu intel_pmu = {
 	.check_period		= intel_pmu_check_period,
 
 	.aux_output_match	= intel_pmu_aux_output_match,
+
+	.lbr_reset		= intel_pmu_lbr_reset_64,
+	.lbr_read		= intel_pmu_lbr_read_64,
+	.lbr_save		= intel_pmu_lbr_save,
+	.lbr_restore		= intel_pmu_lbr_restore,
 };
 
 static __init void intel_clovertown_quirk(void)
@@ -4622,6 +4659,14 @@ __init int intel_pmu_init(void)
 		x86_pmu.intel_cap.capabilities = capabilities;
 	}
 
+	if (x86_pmu.intel_cap.lbr_format == LBR_FORMAT_32) {
+		x86_pmu.lbr_reset = intel_pmu_lbr_reset_32;
+		x86_pmu.lbr_read = intel_pmu_lbr_read_32;
+	}
+
+	if (boot_cpu_has(X86_FEATURE_ARCH_LBR))
+		intel_pmu_arch_lbr_init();
+
 	intel_ds_init();
 
 	x86_add_quirk(intel_arch_events_quirk); /* Install first, so it runs last */
diff --git a/arch/x86/events/intel/ds.c b/arch/x86/events/intel/ds.c
index dc43cc124e09..86848c57b55e 100644
--- a/arch/x86/events/intel/ds.c
+++ b/arch/x86/events/intel/ds.c
@@ -954,7 +954,7 @@ static void adaptive_pebs_record_size_update(void)
 	if (pebs_data_cfg & PEBS_DATACFG_XMMS)
 		sz += sizeof(struct pebs_xmm);
 	if (pebs_data_cfg & PEBS_DATACFG_LBRS)
-		sz += x86_pmu.lbr_nr * sizeof(struct pebs_lbr_entry);
+		sz += x86_pmu.lbr_nr * sizeof(struct lbr_entry);
 
 	cpuc->pebs_record_size = sz;
 }
@@ -1595,10 +1595,10 @@ static void setup_pebs_adaptive_sample_data(struct perf_event *event,
 	}
 
 	if (format_size & PEBS_DATACFG_LBRS) {
-		struct pebs_lbr *lbr = next_record;
+		struct lbr_entry *lbr = next_record;
 		int num_lbr = ((format_size >> PEBS_DATACFG_LBR_SHIFT)
 					& 0xff) + 1;
-		next_record = next_record + num_lbr*sizeof(struct pebs_lbr_entry);
+		next_record = next_record + num_lbr * sizeof(struct lbr_entry);
 
 		if (has_branch_stack(event)) {
 			intel_pmu_store_pebs_lbrs(lbr);
diff --git a/arch/x86/events/intel/lbr.c b/arch/x86/events/intel/lbr.c
index 65113b16804a..63f58bdf556c 100644
--- a/arch/x86/events/intel/lbr.c
+++ b/arch/x86/events/intel/lbr.c
@@ -8,17 +8,6 @@
 
 #include "../perf_event.h"
 
-enum {
-	LBR_FORMAT_32		= 0x00,
-	LBR_FORMAT_LIP		= 0x01,
-	LBR_FORMAT_EIP		= 0x02,
-	LBR_FORMAT_EIP_FLAGS	= 0x03,
-	LBR_FORMAT_EIP_FLAGS2	= 0x04,
-	LBR_FORMAT_INFO		= 0x05,
-	LBR_FORMAT_TIME		= 0x06,
-	LBR_FORMAT_MAX_KNOWN    = LBR_FORMAT_TIME,
-};
-
 static const enum {
 	LBR_EIP_FLAGS		= 1,
 	LBR_TSX			= 2,
@@ -143,8 +132,54 @@ enum {
 	 X86_BR_IRQ		|\
 	 X86_BR_INT)
 
+/*
+ * Intel LBR_CTL bits
+ *
+ * Hardware branch filter for Arch LBR
+ */
+#define ARCH_LBR_KERNEL_BIT		1  /* capture at ring0 */
+#define ARCH_LBR_USER_BIT		2  /* capture at ring > 0 */
+#define ARCH_LBR_CALL_STACK_BIT		3  /* enable call stack */
+#define ARCH_LBR_JCC_BIT		16 /* capture conditional branches */
+#define ARCH_LBR_REL_JMP_BIT		17 /* capture relative jumps */
+#define ARCH_LBR_IND_JMP_BIT		18 /* capture indirect jumps */
+#define ARCH_LBR_REL_CALL_BIT		19 /* capture relative calls */
+#define ARCH_LBR_IND_CALL_BIT		20 /* capture indirect calls */
+#define ARCH_LBR_RETURN_BIT		21 /* capture near returns */
+#define ARCH_LBR_OTHER_BRANCH_BIT	22 /* capture other branches */
+
+#define ARCH_LBR_KERNEL			(1ULL << ARCH_LBR_KERNEL_BIT)
+#define ARCH_LBR_USER			(1ULL << ARCH_LBR_USER_BIT)
+#define ARCH_LBR_CALL_STACK		(1ULL << ARCH_LBR_CALL_STACK_BIT)
+#define ARCH_LBR_JCC			(1ULL << ARCH_LBR_JCC_BIT)
+#define ARCH_LBR_REL_JMP		(1ULL << ARCH_LBR_REL_JMP_BIT)
+#define ARCH_LBR_IND_JMP		(1ULL << ARCH_LBR_IND_JMP_BIT)
+#define ARCH_LBR_REL_CALL		(1ULL << ARCH_LBR_REL_CALL_BIT)
+#define ARCH_LBR_IND_CALL		(1ULL << ARCH_LBR_IND_CALL_BIT)
+#define ARCH_LBR_RETURN			(1ULL << ARCH_LBR_RETURN_BIT)
+#define ARCH_LBR_OTHER_BRANCH		(1ULL << ARCH_LBR_OTHER_BRANCH_BIT)
+
+#define ARCH_LBR_ANY			 \
+	(ARCH_LBR_JCC			|\
+	 ARCH_LBR_REL_JMP		|\
+	 ARCH_LBR_IND_JMP		|\
+	 ARCH_LBR_REL_CALL		|\
+	 ARCH_LBR_IND_CALL		|\
+	 ARCH_LBR_RETURN		|\
+	 ARCH_LBR_OTHER_BRANCH)
+
+#define ARCH_LBR_CTL_MASK			0x7f000e
+
 static void intel_pmu_lbr_filter(struct cpu_hw_events *cpuc);
 
+static __always_inline bool is_lbr_call_stack_bit_set(u64 config)
+{
+	if (static_cpu_has(X86_FEATURE_ARCH_LBR))
+		return !!(config & ARCH_LBR_CALL_STACK);
+
+	return !!(config & LBR_CALL_STACK);
+}
+
 /*
  * We only support LBR implementations that have FREEZE_LBRS_ON_PMI
  * otherwise it becomes near impossible to get a reliable stack.
@@ -168,33 +203,46 @@ static void __intel_pmu_lbr_enable(bool pmi)
 	 */
 	if (cpuc->lbr_sel)
 		lbr_select = cpuc->lbr_sel->config & x86_pmu.lbr_sel_mask;
-	if (!pmi && cpuc->lbr_sel)
+	if (!static_cpu_has(X86_FEATURE_ARCH_LBR) && !pmi && cpuc->lbr_sel)
 		wrmsrl(MSR_LBR_SELECT, lbr_select);
 
 	rdmsrl(MSR_IA32_DEBUGCTLMSR, debugctl);
 	orig_debugctl = debugctl;
-	debugctl |= DEBUGCTLMSR_LBR;
+
+	if (!static_cpu_has(X86_FEATURE_ARCH_LBR))
+		debugctl |= DEBUGCTLMSR_LBR;
 	/*
 	 * LBR callstack does not work well with FREEZE_LBRS_ON_PMI.
 	 * If FREEZE_LBRS_ON_PMI is set, PMI near call/return instructions
 	 * may cause superfluous increase/decrease of LBR_TOS.
 	 */
-	if (!(lbr_select & LBR_CALL_STACK))
+	if (is_lbr_call_stack_bit_set(lbr_select))
+		debugctl &= ~DEBUGCTLMSR_FREEZE_LBRS_ON_PMI;
+	else
 		debugctl |= DEBUGCTLMSR_FREEZE_LBRS_ON_PMI;
+
 	if (orig_debugctl != debugctl)
 		wrmsrl(MSR_IA32_DEBUGCTLMSR, debugctl);
+
+	if (static_cpu_has(X86_FEATURE_ARCH_LBR))
+		wrmsrl(MSR_ARCH_LBR_CTL, lbr_select | ARCH_LBR_CTL_LBREN);
 }
 
 static void __intel_pmu_lbr_disable(void)
 {
 	u64 debugctl;
 
+	if (static_cpu_has(X86_FEATURE_ARCH_LBR)) {
+		wrmsrl(MSR_ARCH_LBR_CTL, 0);
+		return;
+	}
+
 	rdmsrl(MSR_IA32_DEBUGCTLMSR, debugctl);
 	debugctl &= ~(DEBUGCTLMSR_LBR | DEBUGCTLMSR_FREEZE_LBRS_ON_PMI);
 	wrmsrl(MSR_IA32_DEBUGCTLMSR, debugctl);
 }
 
-static void intel_pmu_lbr_reset_32(void)
+void intel_pmu_lbr_reset_32(void)
 {
 	int i;
 
@@ -202,7 +250,7 @@ static void intel_pmu_lbr_reset_32(void)
 		wrmsrl(x86_pmu.lbr_from + i, 0);
 }
 
-static void intel_pmu_lbr_reset_64(void)
+void intel_pmu_lbr_reset_64(void)
 {
 	int i;
 
@@ -210,10 +258,16 @@ static void intel_pmu_lbr_reset_64(void)
 		wrmsrl(x86_pmu.lbr_from + i, 0);
 		wrmsrl(x86_pmu.lbr_to   + i, 0);
 		if (x86_pmu.intel_cap.lbr_format == LBR_FORMAT_INFO)
-			wrmsrl(MSR_LBR_INFO_0 + i, 0);
+			wrmsrl(x86_pmu.lbr_info + i, 0);
 	}
 }
 
+static void intel_pmu_arch_lbr_reset(void)
+{
+	/* Write to ARCH_LBR_DEPTH MSR, all LBR entries are reset to 0 */
+	wrmsrl(MSR_ARCH_LBR_DEPTH, x86_pmu.lbr_nr);
+}
+
 void intel_pmu_lbr_reset(void)
 {
 	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
@@ -221,10 +275,7 @@ void intel_pmu_lbr_reset(void)
 	if (!x86_pmu.lbr_nr)
 		return;
 
-	if (x86_pmu.intel_cap.lbr_format == LBR_FORMAT_32)
-		intel_pmu_lbr_reset_32();
-	else
-		intel_pmu_lbr_reset_64();
+	x86_pmu.lbr_reset();
 
 	cpuc->last_task_ctx = NULL;
 	cpuc->last_log_id = 0;
@@ -308,69 +359,97 @@ static u64 lbr_from_signext_quirk_rd(u64 val)
 	return val;
 }
 
-static inline void wrlbr_from(unsigned int idx, u64 val)
+static __always_inline void wrlbr_from(unsigned int idx, u64 val)
 {
 	val = lbr_from_signext_quirk_wr(val);
 	wrmsrl(x86_pmu.lbr_from + idx, val);
 }
 
-static inline void wrlbr_to(unsigned int idx, u64 val)
+static __always_inline void wrlbr_to(unsigned int idx, u64 val)
 {
 	wrmsrl(x86_pmu.lbr_to + idx, val);
 }
 
-static inline u64 rdlbr_from(unsigned int idx)
+static __always_inline void wrlbr_info(unsigned int idx, u64 val)
+{
+	wrmsrl(x86_pmu.lbr_info + idx, val);
+}
+
+static __always_inline u64 rdlbr_from(unsigned int idx, struct lbr_entry *lbr)
 {
 	u64 val;
 
+	if (lbr)
+		return lbr->from;
+
 	rdmsrl(x86_pmu.lbr_from + idx, val);
 
 	return lbr_from_signext_quirk_rd(val);
 }
 
-static inline u64 rdlbr_to(unsigned int idx)
+static __always_inline u64 rdlbr_to(unsigned int idx, struct lbr_entry *lbr)
 {
 	u64 val;
 
+	if (lbr)
+		return lbr->to;
+
 	rdmsrl(x86_pmu.lbr_to + idx, val);
 
 	return val;
 }
 
-static void __intel_pmu_lbr_restore(struct x86_perf_task_context *task_ctx)
+static __always_inline u64 rdlbr_info(unsigned int idx, struct lbr_entry *lbr)
+{
+	u64 val;
+
+	if (lbr)
+		return lbr->info;
+
+	rdmsrl(x86_pmu.lbr_info + idx, val);
+
+	return val;
+}
+
+static inline void
+wrlbr_all(struct lbr_entry *lbr, unsigned int idx, bool need_info)
+{
+	wrlbr_from(idx, lbr->from);
+	wrlbr_to(idx, lbr->to);
+	if (need_info)
+		wrlbr_info(idx, lbr->info);
+}
+
+static inline bool
+rdlbr_all(struct lbr_entry *lbr, unsigned int idx, bool need_info)
+{
+	u64 from = rdlbr_from(idx, NULL);
+
+	/* Don't read invalid entry */
+	if (!from)
+		return false;
+
+	lbr->from = from;
+	lbr->to = rdlbr_to(idx, NULL);
+	if (need_info)
+		lbr->info = rdlbr_info(idx, NULL);
+
+	return true;
+}
+
+void intel_pmu_lbr_restore(void *ctx)
 {
+	bool need_info = x86_pmu.intel_cap.lbr_format == LBR_FORMAT_INFO;
 	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
+	struct x86_perf_task_context *task_ctx = ctx;
 	int i;
 	unsigned lbr_idx, mask;
-	u64 tos;
-
-	if (task_ctx->lbr_callstack_users == 0 ||
-	    task_ctx->lbr_stack_state == LBR_NONE) {
-		intel_pmu_lbr_reset();
-		return;
-	}
-
-	tos = task_ctx->tos;
-	/*
-	 * Does not restore the LBR registers, if
-	 * - No one else touched them, and
-	 * - Did not enter C6
-	 */
-	if ((task_ctx == cpuc->last_task_ctx) &&
-	    (task_ctx->log_id == cpuc->last_log_id) &&
-	    rdlbr_from(tos)) {
-		task_ctx->lbr_stack_state = LBR_NONE;
-		return;
-	}
+	u64 tos = task_ctx->tos;
 
 	mask = x86_pmu.lbr_nr - 1;
 	for (i = 0; i < task_ctx->valid_lbrs; i++) {
 		lbr_idx = (tos - i) & mask;
-		wrlbr_from(lbr_idx, task_ctx->lbr_from[i]);
-		wrlbr_to  (lbr_idx, task_ctx->lbr_to[i]);
-
-		if (x86_pmu.intel_cap.lbr_format == LBR_FORMAT_INFO)
-			wrmsrl(MSR_LBR_INFO_0 + lbr_idx, task_ctx->lbr_info[i]);
+		wrlbr_all(&task_ctx->lbr[i], lbr_idx, need_info);
 	}
 
 	for (; i < x86_pmu.lbr_nr; i++) {
@@ -378,49 +457,149 @@ static void __intel_pmu_lbr_restore(struct x86_perf_task_context *task_ctx)
 		wrlbr_from(lbr_idx, 0);
 		wrlbr_to(lbr_idx, 0);
 		if (x86_pmu.intel_cap.lbr_format == LBR_FORMAT_INFO)
-			wrmsrl(MSR_LBR_INFO_0 + lbr_idx, 0);
+			wrlbr_info(lbr_idx, 0);
 	}
 
 	wrmsrl(x86_pmu.lbr_tos, tos);
-	task_ctx->lbr_stack_state = LBR_NONE;
+
+	if (cpuc->lbr_select)
+		wrmsrl(MSR_LBR_SELECT, task_ctx->lbr_sel);
 }
 
-static void __intel_pmu_lbr_save(struct x86_perf_task_context *task_ctx)
+static void intel_pmu_arch_lbr_restore(void *ctx)
 {
-	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
-	unsigned lbr_idx, mask;
-	u64 tos, from;
+	struct x86_perf_task_context_arch_lbr *task_ctx = ctx;
+	struct lbr_entry *entries = task_ctx->entries;
 	int i;
 
-	if (task_ctx->lbr_callstack_users == 0) {
-		task_ctx->lbr_stack_state = LBR_NONE;
+	/* Fast reset the LBRs before restore if the call stack is not full. */
+	if (!entries[x86_pmu.lbr_nr - 1].from)
+		intel_pmu_arch_lbr_reset();
+
+	for (i = 0; i < x86_pmu.lbr_nr; i++) {
+		if (!entries[i].from)
+			break;
+		wrlbr_all(&entries[i], i, true);
+	}
+}
+
+/*
+ * Restore the Architecture LBR state from the xsave area in the perf
+ * context data for the task via the XRSTORS instruction.
+ */
+static void intel_pmu_arch_lbr_xrstors(void *ctx)
+{
+	struct x86_perf_task_context_arch_lbr_xsave *task_ctx = ctx;
+
+	copy_kernel_to_dynamic_supervisor(&task_ctx->xsave, XFEATURE_MASK_LBR);
+}
+
+static __always_inline bool lbr_is_reset_in_cstate(void *ctx)
+{
+	if (static_cpu_has(X86_FEATURE_ARCH_LBR))
+		return x86_pmu.lbr_deep_c_reset && !rdlbr_from(0, NULL);
+
+	return !rdlbr_from(((struct x86_perf_task_context *)ctx)->tos, NULL);
+}
+
+static void __intel_pmu_lbr_restore(void *ctx)
+{
+	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
+
+	if (task_context_opt(ctx)->lbr_callstack_users == 0 ||
+	    task_context_opt(ctx)->lbr_stack_state == LBR_NONE) {
+		intel_pmu_lbr_reset();
+		return;
+	}
+
+	/*
+	 * Does not restore the LBR registers, if
+	 * - No one else touched them, and
+	 * - Was not cleared in Cstate
+	 */
+	if ((ctx == cpuc->last_task_ctx) &&
+	    (task_context_opt(ctx)->log_id == cpuc->last_log_id) &&
+	    !lbr_is_reset_in_cstate(ctx)) {
+		task_context_opt(ctx)->lbr_stack_state = LBR_NONE;
 		return;
 	}
 
+	x86_pmu.lbr_restore(ctx);
+
+	task_context_opt(ctx)->lbr_stack_state = LBR_NONE;
+}
+
+void intel_pmu_lbr_save(void *ctx)
+{
+	bool need_info = x86_pmu.intel_cap.lbr_format == LBR_FORMAT_INFO;
+	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
+	struct x86_perf_task_context *task_ctx = ctx;
+	unsigned lbr_idx, mask;
+	u64 tos;
+	int i;
+
 	mask = x86_pmu.lbr_nr - 1;
 	tos = intel_pmu_lbr_tos();
 	for (i = 0; i < x86_pmu.lbr_nr; i++) {
 		lbr_idx = (tos - i) & mask;
-		from = rdlbr_from(lbr_idx);
-		if (!from)
+		if (!rdlbr_all(&task_ctx->lbr[i], lbr_idx, need_info))
 			break;
-		task_ctx->lbr_from[i] = from;
-		task_ctx->lbr_to[i]   = rdlbr_to(lbr_idx);
-		if (x86_pmu.intel_cap.lbr_format == LBR_FORMAT_INFO)
-			rdmsrl(MSR_LBR_INFO_0 + lbr_idx, task_ctx->lbr_info[i]);
 	}
 	task_ctx->valid_lbrs = i;
 	task_ctx->tos = tos;
-	task_ctx->lbr_stack_state = LBR_VALID;
 
-	cpuc->last_task_ctx = task_ctx;
-	cpuc->last_log_id = ++task_ctx->log_id;
+	if (cpuc->lbr_select)
+		rdmsrl(MSR_LBR_SELECT, task_ctx->lbr_sel);
+}
+
+static void intel_pmu_arch_lbr_save(void *ctx)
+{
+	struct x86_perf_task_context_arch_lbr *task_ctx = ctx;
+	struct lbr_entry *entries = task_ctx->entries;
+	int i;
+
+	for (i = 0; i < x86_pmu.lbr_nr; i++) {
+		if (!rdlbr_all(&entries[i], i, true))
+			break;
+	}
+
+	/* LBR call stack is not full. Reset is required in restore. */
+	if (i < x86_pmu.lbr_nr)
+		entries[x86_pmu.lbr_nr - 1].from = 0;
+}
+
+/*
+ * Save the Architecture LBR state to the xsave area in the perf
+ * context data for the task via the XSAVES instruction.
+ */
+static void intel_pmu_arch_lbr_xsaves(void *ctx)
+{
+	struct x86_perf_task_context_arch_lbr_xsave *task_ctx = ctx;
+
+	copy_dynamic_supervisor_to_kernel(&task_ctx->xsave, XFEATURE_MASK_LBR);
+}
+
+static void __intel_pmu_lbr_save(void *ctx)
+{
+	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
+
+	if (task_context_opt(ctx)->lbr_callstack_users == 0) {
+		task_context_opt(ctx)->lbr_stack_state = LBR_NONE;
+		return;
+	}
+
+	x86_pmu.lbr_save(ctx);
+
+	task_context_opt(ctx)->lbr_stack_state = LBR_VALID;
+
+	cpuc->last_task_ctx = ctx;
+	cpuc->last_log_id = ++task_context_opt(ctx)->log_id;
 }
 
 void intel_pmu_lbr_swap_task_ctx(struct perf_event_context *prev,
 				 struct perf_event_context *next)
 {
-	struct x86_perf_task_context *prev_ctx_data, *next_ctx_data;
+	void *prev_ctx_data, *next_ctx_data;
 
 	swap(prev->task_ctx_data, next->task_ctx_data);
 
@@ -436,14 +615,14 @@ void intel_pmu_lbr_swap_task_ctx(struct perf_event_context *prev,
 	if (!prev_ctx_data || !next_ctx_data)
 		return;
 
-	swap(prev_ctx_data->lbr_callstack_users,
-	     next_ctx_data->lbr_callstack_users);
+	swap(task_context_opt(prev_ctx_data)->lbr_callstack_users,
+	     task_context_opt(next_ctx_data)->lbr_callstack_users);
 }
 
 void intel_pmu_lbr_sched_task(struct perf_event_context *ctx, bool sched_in)
 {
 	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
-	struct x86_perf_task_context *task_ctx;
+	void *task_ctx;
 
 	if (!cpuc->lbr_users)
 		return;
@@ -479,18 +658,19 @@ static inline bool branch_user_callstack(unsigned br_sel)
 
 void intel_pmu_lbr_add(struct perf_event *event)
 {
+	struct kmem_cache *kmem_cache = event->pmu->task_ctx_cache;
 	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
-	struct x86_perf_task_context *task_ctx;
 
 	if (!x86_pmu.lbr_nr)
 		return;
 
+	if (event->hw.flags & PERF_X86_EVENT_LBR_SELECT)
+		cpuc->lbr_select = 1;
+
 	cpuc->br_sel = event->hw.branch_reg.reg;
 
-	if (branch_user_callstack(cpuc->br_sel) && event->ctx->task_ctx_data) {
-		task_ctx = event->ctx->task_ctx_data;
-		task_ctx->lbr_callstack_users++;
-	}
+	if (branch_user_callstack(cpuc->br_sel) && event->ctx->task_ctx_data)
+		task_context_opt(event->ctx->task_ctx_data)->lbr_callstack_users++;
 
 	/*
 	 * Request pmu::sched_task() callback, which will fire inside the
@@ -516,21 +696,44 @@ void intel_pmu_lbr_add(struct perf_event *event)
 	perf_sched_cb_inc(event->ctx->pmu);
 	if (!cpuc->lbr_users++ && !event->total_time_running)
 		intel_pmu_lbr_reset();
+
+	if (static_cpu_has(X86_FEATURE_ARCH_LBR) &&
+	    kmem_cache && !cpuc->lbr_xsave &&
+	    (cpuc->lbr_users != cpuc->lbr_pebs_users))
+		cpuc->lbr_xsave = kmem_cache_alloc(kmem_cache, GFP_KERNEL);
+}
+
+void release_lbr_buffers(void)
+{
+	struct kmem_cache *kmem_cache = x86_get_pmu()->task_ctx_cache;
+	struct cpu_hw_events *cpuc;
+	int cpu;
+
+	if (!static_cpu_has(X86_FEATURE_ARCH_LBR))
+		return;
+
+	for_each_possible_cpu(cpu) {
+		cpuc = per_cpu_ptr(&cpu_hw_events, cpu);
+		if (kmem_cache && cpuc->lbr_xsave) {
+			kmem_cache_free(kmem_cache, cpuc->lbr_xsave);
+			cpuc->lbr_xsave = NULL;
+		}
+	}
 }
 
 void intel_pmu_lbr_del(struct perf_event *event)
 {
 	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
-	struct x86_perf_task_context *task_ctx;
 
 	if (!x86_pmu.lbr_nr)
 		return;
 
 	if (branch_user_callstack(cpuc->br_sel) &&
-	    event->ctx->task_ctx_data) {
-		task_ctx = event->ctx->task_ctx_data;
-		task_ctx->lbr_callstack_users--;
-	}
+	    event->ctx->task_ctx_data)
+		task_context_opt(event->ctx->task_ctx_data)->lbr_callstack_users--;
+
+	if (event->hw.flags & PERF_X86_EVENT_LBR_SELECT)
+		cpuc->lbr_select = 0;
 
 	if (x86_pmu.intel_cap.pebs_baseline && event->attr.precise_ip > 0)
 		cpuc->lbr_pebs_users--;
@@ -540,11 +743,19 @@ void intel_pmu_lbr_del(struct perf_event *event)
 	perf_sched_cb_dec(event->ctx->pmu);
 }
 
+static inline bool vlbr_exclude_host(void)
+{
+	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
+
+	return test_bit(INTEL_PMC_IDX_FIXED_VLBR,
+		(unsigned long *)&cpuc->intel_ctrl_guest_mask);
+}
+
 void intel_pmu_lbr_enable_all(bool pmi)
 {
 	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
 
-	if (cpuc->lbr_users)
+	if (cpuc->lbr_users && !vlbr_exclude_host())
 		__intel_pmu_lbr_enable(pmi);
 }
 
@@ -552,11 +763,11 @@ void intel_pmu_lbr_disable_all(void)
 {
 	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
 
-	if (cpuc->lbr_users)
+	if (cpuc->lbr_users && !vlbr_exclude_host())
 		__intel_pmu_lbr_disable();
 }
 
-static void intel_pmu_lbr_read_32(struct cpu_hw_events *cpuc)
+void intel_pmu_lbr_read_32(struct cpu_hw_events *cpuc)
 {
 	unsigned long mask = x86_pmu.lbr_nr - 1;
 	u64 tos = intel_pmu_lbr_tos();
@@ -593,7 +804,7 @@ static void intel_pmu_lbr_read_32(struct cpu_hw_events *cpuc)
  * is the same as the linear address, allowing us to merge the LIP and EIP
  * LBR formats.
  */
-static void intel_pmu_lbr_read_64(struct cpu_hw_events *cpuc)
+void intel_pmu_lbr_read_64(struct cpu_hw_events *cpuc)
 {
 	bool need_info = false, call_stack = false;
 	unsigned long mask = x86_pmu.lbr_nr - 1;
@@ -616,8 +827,8 @@ static void intel_pmu_lbr_read_64(struct cpu_hw_events *cpuc)
 		u16 cycles = 0;
 		int lbr_flags = lbr_desc[lbr_format];
 
-		from = rdlbr_from(lbr_idx);
-		to   = rdlbr_to(lbr_idx);
+		from = rdlbr_from(lbr_idx, NULL);
+		to   = rdlbr_to(lbr_idx, NULL);
 
 		/*
 		 * Read LBR call stack entries
@@ -629,7 +840,7 @@ static void intel_pmu_lbr_read_64(struct cpu_hw_events *cpuc)
 		if (lbr_format == LBR_FORMAT_INFO && need_info) {
 			u64 info;
 
-			rdmsrl(MSR_LBR_INFO_0 + lbr_idx, info);
+			info = rdlbr_info(lbr_idx, NULL);
 			mis = !!(info & LBR_INFO_MISPRED);
 			pred = !mis;
 			in_tx = !!(info & LBR_INFO_IN_TX);
@@ -684,6 +895,93 @@ static void intel_pmu_lbr_read_64(struct cpu_hw_events *cpuc)
 	cpuc->lbr_stack.hw_idx = tos;
 }
 
+static __always_inline int get_lbr_br_type(u64 info)
+{
+	if (!static_cpu_has(X86_FEATURE_ARCH_LBR) || !x86_pmu.lbr_br_type)
+		return 0;
+
+	return (info & LBR_INFO_BR_TYPE) >> LBR_INFO_BR_TYPE_OFFSET;
+}
+
+static __always_inline bool get_lbr_mispred(u64 info)
+{
+	if (static_cpu_has(X86_FEATURE_ARCH_LBR) && !x86_pmu.lbr_mispred)
+		return 0;
+
+	return !!(info & LBR_INFO_MISPRED);
+}
+
+static __always_inline bool get_lbr_predicted(u64 info)
+{
+	if (static_cpu_has(X86_FEATURE_ARCH_LBR) && !x86_pmu.lbr_mispred)
+		return 0;
+
+	return !(info & LBR_INFO_MISPRED);
+}
+
+static __always_inline bool get_lbr_cycles(u64 info)
+{
+	if (static_cpu_has(X86_FEATURE_ARCH_LBR) &&
+	    !(x86_pmu.lbr_timed_lbr && info & LBR_INFO_CYC_CNT_VALID))
+		return 0;
+
+	return info & LBR_INFO_CYCLES;
+}
+
+static void intel_pmu_store_lbr(struct cpu_hw_events *cpuc,
+				struct lbr_entry *entries)
+{
+	struct perf_branch_entry *e;
+	struct lbr_entry *lbr;
+	u64 from, to, info;
+	int i;
+
+	for (i = 0; i < x86_pmu.lbr_nr; i++) {
+		lbr = entries ? &entries[i] : NULL;
+		e = &cpuc->lbr_entries[i];
+
+		from = rdlbr_from(i, lbr);
+		/*
+		 * Read LBR entries until invalid entry (0s) is detected.
+		 */
+		if (!from)
+			break;
+
+		to = rdlbr_to(i, lbr);
+		info = rdlbr_info(i, lbr);
+
+		e->from		= from;
+		e->to		= to;
+		e->mispred	= get_lbr_mispred(info);
+		e->predicted	= get_lbr_predicted(info);
+		e->in_tx	= !!(info & LBR_INFO_IN_TX);
+		e->abort	= !!(info & LBR_INFO_ABORT);
+		e->cycles	= get_lbr_cycles(info);
+		e->type		= get_lbr_br_type(info);
+		e->reserved	= 0;
+	}
+
+	cpuc->lbr_stack.nr = i;
+}
+
+static void intel_pmu_arch_lbr_read(struct cpu_hw_events *cpuc)
+{
+	intel_pmu_store_lbr(cpuc, NULL);
+}
+
+static void intel_pmu_arch_lbr_read_xsave(struct cpu_hw_events *cpuc)
+{
+	struct x86_perf_task_context_arch_lbr_xsave *xsave = cpuc->lbr_xsave;
+
+	if (!xsave) {
+		intel_pmu_store_lbr(cpuc, NULL);
+		return;
+	}
+	copy_dynamic_supervisor_to_kernel(&xsave->xsave, XFEATURE_MASK_LBR);
+
+	intel_pmu_store_lbr(cpuc, xsave->lbr.entries);
+}
+
 void intel_pmu_lbr_read(void)
 {
 	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
@@ -694,13 +992,11 @@ void intel_pmu_lbr_read(void)
 	 * This could be smarter and actually check the event,
 	 * but this simple approach seems to work for now.
 	 */
-	if (!cpuc->lbr_users || cpuc->lbr_users == cpuc->lbr_pebs_users)
+	if (!cpuc->lbr_users || vlbr_exclude_host() ||
+	    cpuc->lbr_users == cpuc->lbr_pebs_users)
 		return;
 
-	if (x86_pmu.intel_cap.lbr_format == LBR_FORMAT_32)
-		intel_pmu_lbr_read_32(cpuc);
-	else
-		intel_pmu_lbr_read_64(cpuc);
+	x86_pmu.lbr_read(cpuc);
 
 	intel_pmu_lbr_filter(cpuc);
 }
@@ -800,6 +1096,11 @@ static int intel_pmu_setup_hw_lbr_filter(struct perf_event *event)
 	reg = &event->hw.branch_reg;
 	reg->idx = EXTRA_REG_LBR;
 
+	if (static_cpu_has(X86_FEATURE_ARCH_LBR)) {
+		reg->config = mask;
+		return 0;
+	}
+
 	/*
 	 * The first 9 bits (LBR_SEL_MASK) in LBR_SELECT operate
 	 * in suppress mode. So LBR_SELECT should be set to
@@ -1056,6 +1357,27 @@ common_branch_type(int type)
 	return PERF_BR_UNKNOWN;
 }
 
+enum {
+	ARCH_LBR_BR_TYPE_JCC			= 0,
+	ARCH_LBR_BR_TYPE_NEAR_IND_JMP		= 1,
+	ARCH_LBR_BR_TYPE_NEAR_REL_JMP		= 2,
+	ARCH_LBR_BR_TYPE_NEAR_IND_CALL		= 3,
+	ARCH_LBR_BR_TYPE_NEAR_REL_CALL		= 4,
+	ARCH_LBR_BR_TYPE_NEAR_RET		= 5,
+	ARCH_LBR_BR_TYPE_KNOWN_MAX		= ARCH_LBR_BR_TYPE_NEAR_RET,
+
+	ARCH_LBR_BR_TYPE_MAP_MAX		= 16,
+};
+
+static const int arch_lbr_br_type_map[ARCH_LBR_BR_TYPE_MAP_MAX] = {
+	[ARCH_LBR_BR_TYPE_JCC]			= X86_BR_JCC,
+	[ARCH_LBR_BR_TYPE_NEAR_IND_JMP]		= X86_BR_IND_JMP,
+	[ARCH_LBR_BR_TYPE_NEAR_REL_JMP]		= X86_BR_JMP,
+	[ARCH_LBR_BR_TYPE_NEAR_IND_CALL]	= X86_BR_IND_CALL,
+	[ARCH_LBR_BR_TYPE_NEAR_REL_CALL]	= X86_BR_CALL,
+	[ARCH_LBR_BR_TYPE_NEAR_RET]		= X86_BR_RET,
+};
+
 /*
  * implement actual branch filter based on user demand.
  * Hardware may not exactly satisfy that request, thus
@@ -1068,7 +1390,7 @@ intel_pmu_lbr_filter(struct cpu_hw_events *cpuc)
 {
 	u64 from, to;
 	int br_sel = cpuc->br_sel;
-	int i, j, type;
+	int i, j, type, to_plm;
 	bool compress = false;
 
 	/* if sampling all branches, then nothing to filter */
@@ -1080,8 +1402,19 @@ intel_pmu_lbr_filter(struct cpu_hw_events *cpuc)
 
 		from = cpuc->lbr_entries[i].from;
 		to = cpuc->lbr_entries[i].to;
+		type = cpuc->lbr_entries[i].type;
 
-		type = branch_type(from, to, cpuc->lbr_entries[i].abort);
+		/*
+		 * Parse the branch type recorded in LBR_x_INFO MSR.
+		 * Doesn't support OTHER_BRANCH decoding for now.
+		 * OTHER_BRANCH branch type still rely on software decoding.
+		 */
+		if (static_cpu_has(X86_FEATURE_ARCH_LBR) &&
+		    type <= ARCH_LBR_BR_TYPE_KNOWN_MAX) {
+			to_plm = kernel_ip(to) ? X86_BR_KERNEL : X86_BR_USER;
+			type = arch_lbr_br_type_map[type] | to_plm;
+		} else
+			type = branch_type(from, to, cpuc->lbr_entries[i].abort);
 		if (type != X86_BR_NONE && (br_sel & X86_BR_ANYTX)) {
 			if (cpuc->lbr_entries[i].in_tx)
 				type |= X86_BR_IN_TX;
@@ -1116,32 +1449,18 @@ intel_pmu_lbr_filter(struct cpu_hw_events *cpuc)
 	}
 }
 
-void intel_pmu_store_pebs_lbrs(struct pebs_lbr *lbr)
+void intel_pmu_store_pebs_lbrs(struct lbr_entry *lbr)
 {
 	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
-	int i;
-
-	cpuc->lbr_stack.nr = x86_pmu.lbr_nr;
 
-	/* Cannot get TOS for large PEBS */
-	if (cpuc->n_pebs == cpuc->n_large_pebs)
+	/* Cannot get TOS for large PEBS and Arch LBR */
+	if (static_cpu_has(X86_FEATURE_ARCH_LBR) ||
+	    (cpuc->n_pebs == cpuc->n_large_pebs))
 		cpuc->lbr_stack.hw_idx = -1ULL;
 	else
 		cpuc->lbr_stack.hw_idx = intel_pmu_lbr_tos();
 
-	for (i = 0; i < x86_pmu.lbr_nr; i++) {
-		u64 info = lbr->lbr[i].info;
-		struct perf_branch_entry *e = &cpuc->lbr_entries[i];
-
-		e->from		= lbr->lbr[i].from;
-		e->to		= lbr->lbr[i].to;
-		e->mispred	= !!(info & LBR_INFO_MISPRED);
-		e->predicted	= !(info & LBR_INFO_MISPRED);
-		e->in_tx	= !!(info & LBR_INFO_IN_TX);
-		e->abort	= !!(info & LBR_INFO_ABORT);
-		e->cycles	= info & LBR_INFO_CYCLES;
-		e->reserved	= 0;
-	}
+	intel_pmu_store_lbr(cpuc, lbr);
 	intel_pmu_lbr_filter(cpuc);
 }
 
@@ -1198,6 +1517,26 @@ static const int hsw_lbr_sel_map[PERF_SAMPLE_BRANCH_MAX_SHIFT] = {
 	[PERF_SAMPLE_BRANCH_CALL_SHIFT]		= LBR_REL_CALL,
 };
 
+static int arch_lbr_ctl_map[PERF_SAMPLE_BRANCH_MAX_SHIFT] = {
+	[PERF_SAMPLE_BRANCH_ANY_SHIFT]		= ARCH_LBR_ANY,
+	[PERF_SAMPLE_BRANCH_USER_SHIFT]		= ARCH_LBR_USER,
+	[PERF_SAMPLE_BRANCH_KERNEL_SHIFT]	= ARCH_LBR_KERNEL,
+	[PERF_SAMPLE_BRANCH_HV_SHIFT]		= LBR_IGN,
+	[PERF_SAMPLE_BRANCH_ANY_RETURN_SHIFT]	= ARCH_LBR_RETURN |
+						  ARCH_LBR_OTHER_BRANCH,
+	[PERF_SAMPLE_BRANCH_ANY_CALL_SHIFT]     = ARCH_LBR_REL_CALL |
+						  ARCH_LBR_IND_CALL |
+						  ARCH_LBR_OTHER_BRANCH,
+	[PERF_SAMPLE_BRANCH_IND_CALL_SHIFT]     = ARCH_LBR_IND_CALL,
+	[PERF_SAMPLE_BRANCH_COND_SHIFT]         = ARCH_LBR_JCC,
+	[PERF_SAMPLE_BRANCH_CALL_STACK_SHIFT]   = ARCH_LBR_REL_CALL |
+						  ARCH_LBR_IND_CALL |
+						  ARCH_LBR_RETURN |
+						  ARCH_LBR_CALL_STACK,
+	[PERF_SAMPLE_BRANCH_IND_JUMP_SHIFT]	= ARCH_LBR_IND_JMP,
+	[PERF_SAMPLE_BRANCH_CALL_SHIFT]		= ARCH_LBR_REL_CALL,
+};
+
 /* core */
 void __init intel_pmu_lbr_init_core(void)
 {
@@ -1251,9 +1590,17 @@ void __init intel_pmu_lbr_init_snb(void)
 	 */
 }
 
+static inline struct kmem_cache *
+create_lbr_kmem_cache(size_t size, size_t align)
+{
+	return kmem_cache_create("x86_lbr", size, align, 0, NULL);
+}
+
 /* haswell */
 void intel_pmu_lbr_init_hsw(void)
 {
+	size_t size = sizeof(struct x86_perf_task_context);
+
 	x86_pmu.lbr_nr	 = 16;
 	x86_pmu.lbr_tos	 = MSR_LBR_TOS;
 	x86_pmu.lbr_from = MSR_LBR_NHM_FROM;
@@ -1262,6 +1609,8 @@ void intel_pmu_lbr_init_hsw(void)
 	x86_pmu.lbr_sel_mask = LBR_SEL_MASK;
 	x86_pmu.lbr_sel_map  = hsw_lbr_sel_map;
 
+	x86_get_pmu()->task_ctx_cache = create_lbr_kmem_cache(size, 0);
+
 	if (lbr_from_signext_quirk_needed())
 		static_branch_enable(&lbr_from_quirk_key);
 }
@@ -1269,14 +1618,19 @@ void intel_pmu_lbr_init_hsw(void)
 /* skylake */
 __init void intel_pmu_lbr_init_skl(void)
 {
+	size_t size = sizeof(struct x86_perf_task_context);
+
 	x86_pmu.lbr_nr	 = 32;
 	x86_pmu.lbr_tos	 = MSR_LBR_TOS;
 	x86_pmu.lbr_from = MSR_LBR_NHM_FROM;
 	x86_pmu.lbr_to   = MSR_LBR_NHM_TO;
+	x86_pmu.lbr_info = MSR_LBR_INFO_0;
 
 	x86_pmu.lbr_sel_mask = LBR_SEL_MASK;
 	x86_pmu.lbr_sel_map  = hsw_lbr_sel_map;
 
+	x86_get_pmu()->task_ctx_cache = create_lbr_kmem_cache(size, 0);
+
 	/*
 	 * SW branch filter usage:
 	 * - support syscall, sysret capture.
@@ -1343,3 +1697,152 @@ void intel_pmu_lbr_init_knl(void)
 	if (x86_pmu.intel_cap.lbr_format == LBR_FORMAT_LIP)
 		x86_pmu.intel_cap.lbr_format = LBR_FORMAT_EIP_FLAGS;
 }
+
+/*
+ * LBR state size is variable based on the max number of registers.
+ * This calculates the expected state size, which should match
+ * what the hardware enumerates for the size of XFEATURE_LBR.
+ */
+static inline unsigned int get_lbr_state_size(void)
+{
+	return sizeof(struct arch_lbr_state) +
+	       x86_pmu.lbr_nr * sizeof(struct lbr_entry);
+}
+
+static bool is_arch_lbr_xsave_available(void)
+{
+	if (!boot_cpu_has(X86_FEATURE_XSAVES))
+		return false;
+
+	/*
+	 * Check the LBR state with the corresponding software structure.
+	 * Disable LBR XSAVES support if the size doesn't match.
+	 */
+	if (WARN_ON(xfeature_size(XFEATURE_LBR) != get_lbr_state_size()))
+		return false;
+
+	return true;
+}
+
+void __init intel_pmu_arch_lbr_init(void)
+{
+	struct pmu *pmu = x86_get_pmu();
+	union cpuid28_eax eax;
+	union cpuid28_ebx ebx;
+	union cpuid28_ecx ecx;
+	unsigned int unused_edx;
+	bool arch_lbr_xsave;
+	size_t size;
+	u64 lbr_nr;
+
+	/* Arch LBR Capabilities */
+	cpuid(28, &eax.full, &ebx.full, &ecx.full, &unused_edx);
+
+	lbr_nr = fls(eax.split.lbr_depth_mask) * 8;
+	if (!lbr_nr)
+		goto clear_arch_lbr;
+
+	/* Apply the max depth of Arch LBR */
+	if (wrmsrl_safe(MSR_ARCH_LBR_DEPTH, lbr_nr))
+		goto clear_arch_lbr;
+
+	x86_pmu.lbr_depth_mask = eax.split.lbr_depth_mask;
+	x86_pmu.lbr_deep_c_reset = eax.split.lbr_deep_c_reset;
+	x86_pmu.lbr_lip = eax.split.lbr_lip;
+	x86_pmu.lbr_cpl = ebx.split.lbr_cpl;
+	x86_pmu.lbr_filter = ebx.split.lbr_filter;
+	x86_pmu.lbr_call_stack = ebx.split.lbr_call_stack;
+	x86_pmu.lbr_mispred = ecx.split.lbr_mispred;
+	x86_pmu.lbr_timed_lbr = ecx.split.lbr_timed_lbr;
+	x86_pmu.lbr_br_type = ecx.split.lbr_br_type;
+	x86_pmu.lbr_nr = lbr_nr;
+
+
+	arch_lbr_xsave = is_arch_lbr_xsave_available();
+	if (arch_lbr_xsave) {
+		size = sizeof(struct x86_perf_task_context_arch_lbr_xsave) +
+		       get_lbr_state_size();
+		pmu->task_ctx_cache = create_lbr_kmem_cache(size,
+							    XSAVE_ALIGNMENT);
+	}
+
+	if (!pmu->task_ctx_cache) {
+		arch_lbr_xsave = false;
+
+		size = sizeof(struct x86_perf_task_context_arch_lbr) +
+		       lbr_nr * sizeof(struct lbr_entry);
+		pmu->task_ctx_cache = create_lbr_kmem_cache(size, 0);
+	}
+
+	x86_pmu.lbr_from = MSR_ARCH_LBR_FROM_0;
+	x86_pmu.lbr_to = MSR_ARCH_LBR_TO_0;
+	x86_pmu.lbr_info = MSR_ARCH_LBR_INFO_0;
+
+	/* LBR callstack requires both CPL and Branch Filtering support */
+	if (!x86_pmu.lbr_cpl ||
+	    !x86_pmu.lbr_filter ||
+	    !x86_pmu.lbr_call_stack)
+		arch_lbr_ctl_map[PERF_SAMPLE_BRANCH_CALL_STACK_SHIFT] = LBR_NOT_SUPP;
+
+	if (!x86_pmu.lbr_cpl) {
+		arch_lbr_ctl_map[PERF_SAMPLE_BRANCH_USER_SHIFT] = LBR_NOT_SUPP;
+		arch_lbr_ctl_map[PERF_SAMPLE_BRANCH_KERNEL_SHIFT] = LBR_NOT_SUPP;
+	} else if (!x86_pmu.lbr_filter) {
+		arch_lbr_ctl_map[PERF_SAMPLE_BRANCH_ANY_SHIFT] = LBR_NOT_SUPP;
+		arch_lbr_ctl_map[PERF_SAMPLE_BRANCH_ANY_RETURN_SHIFT] = LBR_NOT_SUPP;
+		arch_lbr_ctl_map[PERF_SAMPLE_BRANCH_ANY_CALL_SHIFT] = LBR_NOT_SUPP;
+		arch_lbr_ctl_map[PERF_SAMPLE_BRANCH_IND_CALL_SHIFT] = LBR_NOT_SUPP;
+		arch_lbr_ctl_map[PERF_SAMPLE_BRANCH_COND_SHIFT] = LBR_NOT_SUPP;
+		arch_lbr_ctl_map[PERF_SAMPLE_BRANCH_IND_JUMP_SHIFT] = LBR_NOT_SUPP;
+		arch_lbr_ctl_map[PERF_SAMPLE_BRANCH_CALL_SHIFT] = LBR_NOT_SUPP;
+	}
+
+	x86_pmu.lbr_ctl_mask = ARCH_LBR_CTL_MASK;
+	x86_pmu.lbr_ctl_map  = arch_lbr_ctl_map;
+
+	if (!x86_pmu.lbr_cpl && !x86_pmu.lbr_filter)
+		x86_pmu.lbr_ctl_map = NULL;
+
+	x86_pmu.lbr_reset = intel_pmu_arch_lbr_reset;
+	if (arch_lbr_xsave) {
+		x86_pmu.lbr_save = intel_pmu_arch_lbr_xsaves;
+		x86_pmu.lbr_restore = intel_pmu_arch_lbr_xrstors;
+		x86_pmu.lbr_read = intel_pmu_arch_lbr_read_xsave;
+		pr_cont("XSAVE ");
+	} else {
+		x86_pmu.lbr_save = intel_pmu_arch_lbr_save;
+		x86_pmu.lbr_restore = intel_pmu_arch_lbr_restore;
+		x86_pmu.lbr_read = intel_pmu_arch_lbr_read;
+	}
+
+	pr_cont("Architectural LBR, ");
+
+	return;
+
+clear_arch_lbr:
+	clear_cpu_cap(&boot_cpu_data, X86_FEATURE_ARCH_LBR);
+}
+
+/**
+ * x86_perf_get_lbr - get the LBR records information
+ *
+ * @lbr: the caller's memory to store the LBR records information
+ *
+ * Returns: 0 indicates the LBR info has been successfully obtained
+ */
+int x86_perf_get_lbr(struct x86_pmu_lbr *lbr)
+{
+	int lbr_fmt = x86_pmu.intel_cap.lbr_format;
+
+	lbr->nr = x86_pmu.lbr_nr;
+	lbr->from = x86_pmu.lbr_from;
+	lbr->to = x86_pmu.lbr_to;
+	lbr->info = (lbr_fmt == LBR_FORMAT_INFO) ? x86_pmu.lbr_info : 0;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(x86_perf_get_lbr);
+
+struct event_constraint vlbr_constraint =
+	__EVENT_CONSTRAINT(INTEL_FIXED_VLBR_EVENT, (1ULL << INTEL_PMC_IDX_FIXED_VLBR),
+			  FIXED_EVENT_FLAGS, 1, 0, PERF_X86_EVENT_LBR_SELECT);
diff --git a/arch/x86/events/intel/uncore.c b/arch/x86/events/intel/uncore.c
index cf76d6631afa..d5c6d3b340c5 100644
--- a/arch/x86/events/intel/uncore.c
+++ b/arch/x86/events/intel/uncore.c
@@ -16,7 +16,7 @@ struct pci_driver *uncore_pci_driver;
 DEFINE_RAW_SPINLOCK(pci2phy_map_lock);
 struct list_head pci2phy_map_head = LIST_HEAD_INIT(pci2phy_map_head);
 struct pci_extra_dev *uncore_extra_pci_dev;
-static int max_dies;
+int __uncore_max_dies;
 
 /* mask of cpus that collect uncore events */
 static cpumask_t uncore_cpu_mask;
@@ -108,7 +108,7 @@ struct intel_uncore_box *uncore_pmu_to_box(struct intel_uncore_pmu *pmu, int cpu
 	 * The unsigned check also catches the '-1' return value for non
 	 * existent mappings in the topology map.
 	 */
-	return dieid < max_dies ? pmu->boxes[dieid] : NULL;
+	return dieid < uncore_max_dies() ? pmu->boxes[dieid] : NULL;
 }
 
 u64 uncore_msr_read_counter(struct intel_uncore_box *box, struct perf_event *event)
@@ -132,6 +132,9 @@ u64 uncore_mmio_read_counter(struct intel_uncore_box *box,
 	if (!box->io_addr)
 		return 0;
 
+	if (!uncore_mmio_is_valid_offset(box, event->hw.event_base))
+		return 0;
+
 	return readq(box->io_addr + event->hw.event_base);
 }
 
@@ -843,10 +846,12 @@ static int uncore_pmu_register(struct intel_uncore_pmu *pmu)
 			.read		= uncore_pmu_event_read,
 			.module		= THIS_MODULE,
 			.capabilities	= PERF_PMU_CAP_NO_EXCLUDE,
+			.attr_update	= pmu->type->attr_update,
 		};
 	} else {
 		pmu->pmu = *pmu->type->pmu;
 		pmu->pmu.attr_groups = pmu->type->attr_groups;
+		pmu->pmu.attr_update = pmu->type->attr_update;
 	}
 
 	if (pmu->type->num_boxes == 1) {
@@ -877,7 +882,7 @@ static void uncore_free_boxes(struct intel_uncore_pmu *pmu)
 {
 	int die;
 
-	for (die = 0; die < max_dies; die++)
+	for (die = 0; die < uncore_max_dies(); die++)
 		kfree(pmu->boxes[die]);
 	kfree(pmu->boxes);
 }
@@ -887,6 +892,9 @@ static void uncore_type_exit(struct intel_uncore_type *type)
 	struct intel_uncore_pmu *pmu = type->pmus;
 	int i;
 
+	if (type->cleanup_mapping)
+		type->cleanup_mapping(type);
+
 	if (pmu) {
 		for (i = 0; i < type->num_boxes; i++, pmu++) {
 			uncore_pmu_unregister(pmu);
@@ -915,7 +923,7 @@ static int __init uncore_type_init(struct intel_uncore_type *type, bool setid)
 	if (!pmus)
 		return -ENOMEM;
 
-	size = max_dies * sizeof(struct intel_uncore_box *);
+	size = uncore_max_dies() * sizeof(struct intel_uncore_box *);
 
 	for (i = 0; i < type->num_boxes; i++) {
 		pmus[i].func_id	= setid ? i : -1;
@@ -954,6 +962,9 @@ static int __init uncore_type_init(struct intel_uncore_type *type, bool setid)
 
 	type->pmu_group = &uncore_pmu_attr_group;
 
+	if (type->set_mapping)
+		type->set_mapping(type);
+
 	return 0;
 
 err:
@@ -1112,7 +1123,7 @@ static int __init uncore_pci_init(void)
 	size_t size;
 	int ret;
 
-	size = max_dies * sizeof(struct pci_extra_dev);
+	size = uncore_max_dies() * sizeof(struct pci_extra_dev);
 	uncore_extra_pci_dev = kzalloc(size, GFP_KERNEL);
 	if (!uncore_extra_pci_dev) {
 		ret = -ENOMEM;
@@ -1514,6 +1525,8 @@ static const struct x86_cpu_id intel_uncore_match[] __initconst = {
 	X86_MATCH_INTEL_FAM6_MODEL(SKYLAKE_X,		&skx_uncore_init),
 	X86_MATCH_INTEL_FAM6_MODEL(KABYLAKE_L,		&skl_uncore_init),
 	X86_MATCH_INTEL_FAM6_MODEL(KABYLAKE,		&skl_uncore_init),
+	X86_MATCH_INTEL_FAM6_MODEL(COMETLAKE_L,		&skl_uncore_init),
+	X86_MATCH_INTEL_FAM6_MODEL(COMETLAKE,		&skl_uncore_init),
 	X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_L,		&icl_uncore_init),
 	X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_NNPI,	&icl_uncore_init),
 	X86_MATCH_INTEL_FAM6_MODEL(ICELAKE,		&icl_uncore_init),
@@ -1539,7 +1552,8 @@ static int __init intel_uncore_init(void)
 	if (boot_cpu_has(X86_FEATURE_HYPERVISOR))
 		return -ENODEV;
 
-	max_dies = topology_max_packages() * topology_max_die_per_package();
+	__uncore_max_dies =
+		topology_max_packages() * topology_max_die_per_package();
 
 	uncore_init = (struct intel_uncore_init_fun *)id->driver_data;
 	if (uncore_init->pci_init) {
diff --git a/arch/x86/events/intel/uncore.h b/arch/x86/events/intel/uncore.h
index b469ddd45515..105fdc69825e 100644
--- a/arch/x86/events/intel/uncore.h
+++ b/arch/x86/events/intel/uncore.h
@@ -61,6 +61,7 @@ struct intel_uncore_type {
 		unsigned msr_offset;
 		unsigned mmio_offset;
 	};
+	unsigned mmio_map_size;
 	unsigned num_shared_regs:8;
 	unsigned single_fixed:1;
 	unsigned pair_ctr_ctl:1;
@@ -72,7 +73,19 @@ struct intel_uncore_type {
 	struct uncore_event_desc *event_descs;
 	struct freerunning_counters *freerunning;
 	const struct attribute_group *attr_groups[4];
+	const struct attribute_group **attr_update;
 	struct pmu *pmu; /* for custom pmu ops */
+	/*
+	 * Uncore PMU would store relevant platform topology configuration here
+	 * to identify which platform component each PMON block of that type is
+	 * supposed to monitor.
+	 */
+	u64 *topology;
+	/*
+	 * Optional callbacks for managing mapping of Uncore units to PMONs
+	 */
+	int (*set_mapping)(struct intel_uncore_type *type);
+	void (*cleanup_mapping)(struct intel_uncore_type *type);
 };
 
 #define pmu_group attr_groups[0]
@@ -169,6 +182,18 @@ int uncore_pcibus_to_physid(struct pci_bus *bus);
 ssize_t uncore_event_show(struct kobject *kobj,
 			  struct kobj_attribute *attr, char *buf);
 
+static inline struct intel_uncore_pmu *dev_to_uncore_pmu(struct device *dev)
+{
+	return container_of(dev_get_drvdata(dev), struct intel_uncore_pmu, pmu);
+}
+
+#define to_device_attribute(n)	container_of(n, struct device_attribute, attr)
+#define to_dev_ext_attribute(n)	container_of(n, struct dev_ext_attribute, attr)
+#define attr_to_ext_attr(n)	to_dev_ext_attribute(to_device_attribute(n))
+
+extern int __uncore_max_dies;
+#define uncore_max_dies()	(__uncore_max_dies)
+
 #define INTEL_UNCORE_EVENT_DESC(_name, _config)			\
 {								\
 	.attr	= __ATTR(_name, 0444, uncore_event_show, NULL),	\
@@ -196,6 +221,18 @@ static inline bool uncore_pmc_freerunning(int idx)
 	return idx == UNCORE_PMC_IDX_FREERUNNING;
 }
 
+static inline bool uncore_mmio_is_valid_offset(struct intel_uncore_box *box,
+					       unsigned long offset)
+{
+	if (offset < box->pmu->type->mmio_map_size)
+		return true;
+
+	pr_warn_once("perf uncore: Invalid offset 0x%lx exceeds mapped area of %s.\n",
+		     offset, box->pmu->type->name);
+
+	return false;
+}
+
 static inline
 unsigned int uncore_mmio_box_ctl(struct intel_uncore_box *box)
 {
diff --git a/arch/x86/events/intel/uncore_snb.c b/arch/x86/events/intel/uncore_snb.c
index 3de1065eefc4..cb94ba86efd2 100644
--- a/arch/x86/events/intel/uncore_snb.c
+++ b/arch/x86/events/intel/uncore_snb.c
@@ -42,6 +42,17 @@
 #define PCI_DEVICE_ID_INTEL_WHL_UQ_IMC		0x3ed0
 #define PCI_DEVICE_ID_INTEL_WHL_4_UQ_IMC	0x3e34
 #define PCI_DEVICE_ID_INTEL_WHL_UD_IMC		0x3e35
+#define PCI_DEVICE_ID_INTEL_CML_H1_IMC		0x9b44
+#define PCI_DEVICE_ID_INTEL_CML_H2_IMC		0x9b54
+#define PCI_DEVICE_ID_INTEL_CML_H3_IMC		0x9b64
+#define PCI_DEVICE_ID_INTEL_CML_U1_IMC		0x9b51
+#define PCI_DEVICE_ID_INTEL_CML_U2_IMC		0x9b61
+#define PCI_DEVICE_ID_INTEL_CML_U3_IMC		0x9b71
+#define PCI_DEVICE_ID_INTEL_CML_S1_IMC		0x9b33
+#define PCI_DEVICE_ID_INTEL_CML_S2_IMC		0x9b43
+#define PCI_DEVICE_ID_INTEL_CML_S3_IMC		0x9b53
+#define PCI_DEVICE_ID_INTEL_CML_S4_IMC		0x9b63
+#define PCI_DEVICE_ID_INTEL_CML_S5_IMC		0x9b73
 #define PCI_DEVICE_ID_INTEL_ICL_U_IMC		0x8a02
 #define PCI_DEVICE_ID_INTEL_ICL_U2_IMC		0x8a12
 #define PCI_DEVICE_ID_INTEL_TGL_U1_IMC		0x9a02
@@ -415,6 +426,7 @@ static const struct attribute_group snb_uncore_imc_format_group = {
 
 static void snb_uncore_imc_init_box(struct intel_uncore_box *box)
 {
+	struct intel_uncore_type *type = box->pmu->type;
 	struct pci_dev *pdev = box->pci_dev;
 	int where = SNB_UNCORE_PCI_IMC_BAR_OFFSET;
 	resource_size_t addr;
@@ -430,7 +442,10 @@ static void snb_uncore_imc_init_box(struct intel_uncore_box *box)
 
 	addr &= ~(PAGE_SIZE - 1);
 
-	box->io_addr = ioremap(addr, SNB_UNCORE_PCI_IMC_MAP_SIZE);
+	box->io_addr = ioremap(addr, type->mmio_map_size);
+	if (!box->io_addr)
+		pr_warn("perf uncore: Failed to ioremap for %s.\n", type->name);
+
 	box->hrtimer_duration = UNCORE_SNB_IMC_HRTIMER_INTERVAL;
 }
 
@@ -586,6 +601,7 @@ static struct intel_uncore_type snb_uncore_imc = {
 	.num_counters   = 2,
 	.num_boxes	= 1,
 	.num_freerunning_types	= SNB_PCI_UNCORE_IMC_FREERUNNING_TYPE_MAX,
+	.mmio_map_size	= SNB_UNCORE_PCI_IMC_MAP_SIZE,
 	.freerunning	= snb_uncore_imc_freerunning,
 	.event_descs	= snb_uncore_imc_events,
 	.format_group	= &snb_uncore_imc_format_group,
@@ -771,6 +787,50 @@ static const struct pci_device_id skl_uncore_pci_ids[] = {
 		PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WHL_UD_IMC),
 		.driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0),
 	},
+	{ /* IMC */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CML_H1_IMC),
+		.driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0),
+	},
+	{ /* IMC */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CML_H2_IMC),
+		.driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0),
+	},
+	{ /* IMC */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CML_H3_IMC),
+		.driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0),
+	},
+	{ /* IMC */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CML_U1_IMC),
+		.driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0),
+	},
+	{ /* IMC */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CML_U2_IMC),
+		.driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0),
+	},
+	{ /* IMC */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CML_U3_IMC),
+		.driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0),
+	},
+	{ /* IMC */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CML_S1_IMC),
+		.driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0),
+	},
+	{ /* IMC */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CML_S2_IMC),
+		.driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0),
+	},
+	{ /* IMC */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CML_S3_IMC),
+		.driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0),
+	},
+	{ /* IMC */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CML_S4_IMC),
+		.driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0),
+	},
+	{ /* IMC */
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CML_S5_IMC),
+		.driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0),
+	},
 	{ /* end: all zeroes */ },
 };
 
@@ -863,6 +923,17 @@ static const struct imc_uncore_pci_dev desktop_imc_pci_ids[] = {
 	IMC_DEV(WHL_UQ_IMC, &skl_uncore_pci_driver),	/* 8th Gen Core U Mobile Quad Core */
 	IMC_DEV(WHL_4_UQ_IMC, &skl_uncore_pci_driver),	/* 8th Gen Core U Mobile Quad Core */
 	IMC_DEV(WHL_UD_IMC, &skl_uncore_pci_driver),	/* 8th Gen Core U Mobile Dual Core */
+	IMC_DEV(CML_H1_IMC, &skl_uncore_pci_driver),
+	IMC_DEV(CML_H2_IMC, &skl_uncore_pci_driver),
+	IMC_DEV(CML_H3_IMC, &skl_uncore_pci_driver),
+	IMC_DEV(CML_U1_IMC, &skl_uncore_pci_driver),
+	IMC_DEV(CML_U2_IMC, &skl_uncore_pci_driver),
+	IMC_DEV(CML_U3_IMC, &skl_uncore_pci_driver),
+	IMC_DEV(CML_S1_IMC, &skl_uncore_pci_driver),
+	IMC_DEV(CML_S2_IMC, &skl_uncore_pci_driver),
+	IMC_DEV(CML_S3_IMC, &skl_uncore_pci_driver),
+	IMC_DEV(CML_S4_IMC, &skl_uncore_pci_driver),
+	IMC_DEV(CML_S5_IMC, &skl_uncore_pci_driver),
 	IMC_DEV(ICL_U_IMC, &icl_uncore_pci_driver),	/* 10th Gen Core Mobile */
 	IMC_DEV(ICL_U2_IMC, &icl_uncore_pci_driver),	/* 10th Gen Core Mobile */
 	{  /* end marker */ }
@@ -1085,11 +1156,13 @@ static struct pci_dev *tgl_uncore_get_mc_dev(void)
 }
 
 #define TGL_UNCORE_MMIO_IMC_MEM_OFFSET		0x10000
+#define TGL_UNCORE_PCI_IMC_MAP_SIZE		0xe000
 
 static void tgl_uncore_imc_freerunning_init_box(struct intel_uncore_box *box)
 {
 	struct pci_dev *pdev = tgl_uncore_get_mc_dev();
 	struct intel_uncore_pmu *pmu = box->pmu;
+	struct intel_uncore_type *type = pmu->type;
 	resource_size_t addr;
 	u32 mch_bar;
 
@@ -1112,7 +1185,9 @@ static void tgl_uncore_imc_freerunning_init_box(struct intel_uncore_box *box)
 	addr |= ((resource_size_t)mch_bar << 32);
 #endif
 
-	box->io_addr = ioremap(addr, SNB_UNCORE_PCI_IMC_MAP_SIZE);
+	box->io_addr = ioremap(addr, type->mmio_map_size);
+	if (!box->io_addr)
+		pr_warn("perf uncore: Failed to ioremap for %s.\n", type->name);
 }
 
 static struct intel_uncore_ops tgl_uncore_imc_freerunning_ops = {
@@ -1138,6 +1213,7 @@ static struct intel_uncore_type tgl_uncore_imc_free_running = {
 	.num_counters		= 3,
 	.num_boxes		= 2,
 	.num_freerunning_types	= TGL_MMIO_UNCORE_IMC_FREERUNNING_TYPE_MAX,
+	.mmio_map_size		= TGL_UNCORE_PCI_IMC_MAP_SIZE,
 	.freerunning		= tgl_uncore_imc_freerunning,
 	.ops			= &tgl_uncore_imc_freerunning_ops,
 	.event_descs		= tgl_uncore_imc_events,
diff --git a/arch/x86/events/intel/uncore_snbep.c b/arch/x86/events/intel/uncore_snbep.c
index 07652fa20ebb..62e88ad919ff 100644
--- a/arch/x86/events/intel/uncore_snbep.c
+++ b/arch/x86/events/intel/uncore_snbep.c
@@ -273,6 +273,30 @@
 #define SKX_CPUNODEID			0xc0
 #define SKX_GIDNIDMAP			0xd4
 
+/*
+ * The CPU_BUS_NUMBER MSR returns the values of the respective CPUBUSNO CSR
+ * that BIOS programmed. MSR has package scope.
+ * |  Bit  |  Default  |  Description
+ * | [63]  |    00h    | VALID - When set, indicates the CPU bus
+ *                       numbers have been initialized. (RO)
+ * |[62:48]|    ---    | Reserved
+ * |[47:40]|    00h    | BUS_NUM_5 — Return the bus number BIOS assigned
+ *                       CPUBUSNO(5). (RO)
+ * |[39:32]|    00h    | BUS_NUM_4 — Return the bus number BIOS assigned
+ *                       CPUBUSNO(4). (RO)
+ * |[31:24]|    00h    | BUS_NUM_3 — Return the bus number BIOS assigned
+ *                       CPUBUSNO(3). (RO)
+ * |[23:16]|    00h    | BUS_NUM_2 — Return the bus number BIOS assigned
+ *                       CPUBUSNO(2). (RO)
+ * |[15:8] |    00h    | BUS_NUM_1 — Return the bus number BIOS assigned
+ *                       CPUBUSNO(1). (RO)
+ * | [7:0] |    00h    | BUS_NUM_0 — Return the bus number BIOS assigned
+ *                       CPUBUSNO(0). (RO)
+ */
+#define SKX_MSR_CPU_BUS_NUMBER		0x300
+#define SKX_MSR_CPU_BUS_VALID_BIT	(1ULL << 63)
+#define BUS_NUM_STRIDE			8
+
 /* SKX CHA */
 #define SKX_CHA_MSR_PMON_BOX_FILTER_TID		(0x1ffULL << 0)
 #define SKX_CHA_MSR_PMON_BOX_FILTER_LINK	(0xfULL << 9)
@@ -3612,6 +3636,170 @@ static struct intel_uncore_ops skx_uncore_iio_ops = {
 	.read_counter		= uncore_msr_read_counter,
 };
 
+static inline u8 skx_iio_stack(struct intel_uncore_pmu *pmu, int die)
+{
+	return pmu->type->topology[die] >> (pmu->pmu_idx * BUS_NUM_STRIDE);
+}
+
+static umode_t
+skx_iio_mapping_visible(struct kobject *kobj, struct attribute *attr, int die)
+{
+	struct intel_uncore_pmu *pmu = dev_to_uncore_pmu(kobj_to_dev(kobj));
+
+	/* Root bus 0x00 is valid only for die 0 AND pmu_idx = 0. */
+	return (!skx_iio_stack(pmu, die) && pmu->pmu_idx) ? 0 : attr->mode;
+}
+
+static ssize_t skx_iio_mapping_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct pci_bus *bus = pci_find_next_bus(NULL);
+	struct intel_uncore_pmu *uncore_pmu = dev_to_uncore_pmu(dev);
+	struct dev_ext_attribute *ea = to_dev_ext_attribute(attr);
+	long die = (long)ea->var;
+
+	/*
+	 * Current implementation is for single segment configuration hence it's
+	 * safe to take the segment value from the first available root bus.
+	 */
+	return sprintf(buf, "%04x:%02x\n", pci_domain_nr(bus),
+					   skx_iio_stack(uncore_pmu, die));
+}
+
+static int skx_msr_cpu_bus_read(int cpu, u64 *topology)
+{
+	u64 msr_value;
+
+	if (rdmsrl_on_cpu(cpu, SKX_MSR_CPU_BUS_NUMBER, &msr_value) ||
+			!(msr_value & SKX_MSR_CPU_BUS_VALID_BIT))
+		return -ENXIO;
+
+	*topology = msr_value;
+
+	return 0;
+}
+
+static int die_to_cpu(int die)
+{
+	int res = 0, cpu, current_die;
+	/*
+	 * Using cpus_read_lock() to ensure cpu is not going down between
+	 * looking at cpu_online_mask.
+	 */
+	cpus_read_lock();
+	for_each_online_cpu(cpu) {
+		current_die = topology_logical_die_id(cpu);
+		if (current_die == die) {
+			res = cpu;
+			break;
+		}
+	}
+	cpus_read_unlock();
+	return res;
+}
+
+static int skx_iio_get_topology(struct intel_uncore_type *type)
+{
+	int i, ret;
+	struct pci_bus *bus = NULL;
+
+	/*
+	 * Verified single-segment environments only; disabled for multiple
+	 * segment topologies for now except VMD domains.
+	 * VMD domains start at 0x10000 to not clash with ACPI _SEG domains.
+	 */
+	while ((bus = pci_find_next_bus(bus))
+		&& (!pci_domain_nr(bus) || pci_domain_nr(bus) > 0xffff))
+		;
+	if (bus)
+		return -EPERM;
+
+	type->topology = kcalloc(uncore_max_dies(), sizeof(u64), GFP_KERNEL);
+	if (!type->topology)
+		return -ENOMEM;
+
+	for (i = 0; i < uncore_max_dies(); i++) {
+		ret = skx_msr_cpu_bus_read(die_to_cpu(i), &type->topology[i]);
+		if (ret) {
+			kfree(type->topology);
+			type->topology = NULL;
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static struct attribute_group skx_iio_mapping_group = {
+	.is_visible	= skx_iio_mapping_visible,
+};
+
+static const struct attribute_group *skx_iio_attr_update[] = {
+	&skx_iio_mapping_group,
+	NULL,
+};
+
+static int skx_iio_set_mapping(struct intel_uncore_type *type)
+{
+	char buf[64];
+	int ret;
+	long die = -1;
+	struct attribute **attrs = NULL;
+	struct dev_ext_attribute *eas = NULL;
+
+	ret = skx_iio_get_topology(type);
+	if (ret)
+		return ret;
+
+	/* One more for NULL. */
+	attrs = kcalloc((uncore_max_dies() + 1), sizeof(*attrs), GFP_KERNEL);
+	if (!attrs)
+		goto err;
+
+	eas = kcalloc(uncore_max_dies(), sizeof(*eas), GFP_KERNEL);
+	if (!eas)
+		goto err;
+
+	for (die = 0; die < uncore_max_dies(); die++) {
+		sprintf(buf, "die%ld", die);
+		sysfs_attr_init(&eas[die].attr.attr);
+		eas[die].attr.attr.name = kstrdup(buf, GFP_KERNEL);
+		if (!eas[die].attr.attr.name)
+			goto err;
+		eas[die].attr.attr.mode = 0444;
+		eas[die].attr.show = skx_iio_mapping_show;
+		eas[die].attr.store = NULL;
+		eas[die].var = (void *)die;
+		attrs[die] = &eas[die].attr.attr;
+	}
+	skx_iio_mapping_group.attrs = attrs;
+
+	return 0;
+err:
+	for (; die >= 0; die--)
+		kfree(eas[die].attr.attr.name);
+	kfree(eas);
+	kfree(attrs);
+	kfree(type->topology);
+	type->attr_update = NULL;
+	return -ENOMEM;
+}
+
+static void skx_iio_cleanup_mapping(struct intel_uncore_type *type)
+{
+	struct attribute **attr = skx_iio_mapping_group.attrs;
+
+	if (!attr)
+		return;
+
+	for (; *attr; attr++)
+		kfree((*attr)->name);
+	kfree(attr_to_ext_attr(*skx_iio_mapping_group.attrs));
+	kfree(skx_iio_mapping_group.attrs);
+	skx_iio_mapping_group.attrs = NULL;
+	kfree(type->topology);
+}
+
 static struct intel_uncore_type skx_uncore_iio = {
 	.name			= "iio",
 	.num_counters		= 4,
@@ -3626,6 +3814,9 @@ static struct intel_uncore_type skx_uncore_iio = {
 	.constraints		= skx_uncore_iio_constraints,
 	.ops			= &skx_uncore_iio_ops,
 	.format_group		= &skx_uncore_iio_format_group,
+	.attr_update		= skx_iio_attr_update,
+	.set_mapping		= skx_iio_set_mapping,
+	.cleanup_mapping	= skx_iio_cleanup_mapping,
 };
 
 enum perf_uncore_iio_freerunning_type_id {
@@ -4421,6 +4612,7 @@ static void __snr_uncore_mmio_init_box(struct intel_uncore_box *box,
 				       unsigned int box_ctl, int mem_offset)
 {
 	struct pci_dev *pdev = snr_uncore_get_mc_dev(box->dieid);
+	struct intel_uncore_type *type = box->pmu->type;
 	resource_size_t addr;
 	u32 pci_dword;
 
@@ -4435,9 +4627,11 @@ static void __snr_uncore_mmio_init_box(struct intel_uncore_box *box,
 
 	addr += box_ctl;
 
-	box->io_addr = ioremap(addr, SNR_IMC_MMIO_SIZE);
-	if (!box->io_addr)
+	box->io_addr = ioremap(addr, type->mmio_map_size);
+	if (!box->io_addr) {
+		pr_warn("perf uncore: Failed to ioremap for %s.\n", type->name);
 		return;
+	}
 
 	writel(IVBEP_PMON_BOX_CTL_INT, box->io_addr);
 }
@@ -4480,6 +4674,9 @@ static void snr_uncore_mmio_enable_event(struct intel_uncore_box *box,
 	if (!box->io_addr)
 		return;
 
+	if (!uncore_mmio_is_valid_offset(box, hwc->config_base))
+		return;
+
 	writel(hwc->config | SNBEP_PMON_CTL_EN,
 	       box->io_addr + hwc->config_base);
 }
@@ -4492,6 +4689,9 @@ static void snr_uncore_mmio_disable_event(struct intel_uncore_box *box,
 	if (!box->io_addr)
 		return;
 
+	if (!uncore_mmio_is_valid_offset(box, hwc->config_base))
+		return;
+
 	writel(hwc->config, box->io_addr + hwc->config_base);
 }
 
@@ -4530,6 +4730,7 @@ static struct intel_uncore_type snr_uncore_imc = {
 	.event_mask	= SNBEP_PMON_RAW_EVENT_MASK,
 	.box_ctl	= SNR_IMC_MMIO_PMON_BOX_CTL,
 	.mmio_offset	= SNR_IMC_MMIO_OFFSET,
+	.mmio_map_size	= SNR_IMC_MMIO_SIZE,
 	.ops		= &snr_uncore_mmio_ops,
 	.format_group	= &skx_uncore_format_group,
 };
@@ -4570,6 +4771,7 @@ static struct intel_uncore_type snr_uncore_imc_free_running = {
 	.num_counters		= 3,
 	.num_boxes		= 1,
 	.num_freerunning_types	= SNR_IMC_FREERUNNING_TYPE_MAX,
+	.mmio_map_size		= SNR_IMC_MMIO_SIZE,
 	.freerunning		= snr_imc_freerunning,
 	.ops			= &snr_uncore_imc_freerunning_ops,
 	.event_descs		= snr_uncore_imc_freerunning_events,
@@ -4987,6 +5189,7 @@ static struct intel_uncore_type icx_uncore_imc = {
 	.event_mask	= SNBEP_PMON_RAW_EVENT_MASK,
 	.box_ctl	= SNR_IMC_MMIO_PMON_BOX_CTL,
 	.mmio_offset	= SNR_IMC_MMIO_OFFSET,
+	.mmio_map_size	= SNR_IMC_MMIO_SIZE,
 	.ops		= &icx_uncore_mmio_ops,
 	.format_group	= &skx_uncore_format_group,
 };
@@ -5044,6 +5247,7 @@ static struct intel_uncore_type icx_uncore_imc_free_running = {
 	.num_counters		= 5,
 	.num_boxes		= 4,
 	.num_freerunning_types	= ICX_IMC_FREERUNNING_TYPE_MAX,
+	.mmio_map_size		= SNR_IMC_MMIO_SIZE,
 	.freerunning		= icx_imc_freerunning,
 	.ops			= &icx_uncore_imc_freerunning_ops,
 	.event_descs		= icx_uncore_imc_freerunning_events,
diff --git a/arch/x86/events/perf_event.h b/arch/x86/events/perf_event.h
index e17a3d8a47ed..7b68ab5f19e7 100644
--- a/arch/x86/events/perf_event.h
+++ b/arch/x86/events/perf_event.h
@@ -78,6 +78,7 @@ static inline bool constraint_match(struct event_constraint *c, u64 ecode)
 #define PERF_X86_EVENT_LARGE_PEBS	0x0400 /* use large PEBS */
 #define PERF_X86_EVENT_PEBS_VIA_PT	0x0800 /* use PT buffer for PEBS */
 #define PERF_X86_EVENT_PAIR		0x1000 /* Large Increment per Cycle */
+#define PERF_X86_EVENT_LBR_SELECT	0x2000 /* Save/Restore MSR_LBR_SELECT */
 
 struct amd_nb {
 	int nb_id;  /* NorthBridge id */
@@ -179,6 +180,17 @@ struct x86_perf_task_context;
 #define MAX_LBR_ENTRIES		32
 
 enum {
+	LBR_FORMAT_32		= 0x00,
+	LBR_FORMAT_LIP		= 0x01,
+	LBR_FORMAT_EIP		= 0x02,
+	LBR_FORMAT_EIP_FLAGS	= 0x03,
+	LBR_FORMAT_EIP_FLAGS2	= 0x04,
+	LBR_FORMAT_INFO		= 0x05,
+	LBR_FORMAT_TIME		= 0x06,
+	LBR_FORMAT_MAX_KNOWN    = LBR_FORMAT_TIME,
+};
+
+enum {
 	X86_PERF_KFREE_SHARED = 0,
 	X86_PERF_KFREE_EXCL   = 1,
 	X86_PERF_KFREE_MAX
@@ -233,10 +245,15 @@ struct cpu_hw_events {
 	int				lbr_pebs_users;
 	struct perf_branch_stack	lbr_stack;
 	struct perf_branch_entry	lbr_entries[MAX_LBR_ENTRIES];
-	struct er_account		*lbr_sel;
+	union {
+		struct er_account		*lbr_sel;
+		struct er_account		*lbr_ctl;
+	};
 	u64				br_sel;
-	struct x86_perf_task_context	*last_task_ctx;
+	void				*last_task_ctx;
 	int				last_log_id;
+	int				lbr_select;
+	void				*lbr_xsave;
 
 	/*
 	 * Intel host/guest exclude bits
@@ -673,14 +690,38 @@ struct x86_pmu {
 	/*
 	 * Intel LBR
 	 */
-	unsigned long	lbr_tos, lbr_from, lbr_to; /* MSR base regs       */
-	int		lbr_nr;			   /* hardware stack size */
-	u64		lbr_sel_mask;		   /* LBR_SELECT valid bits */
-	const int	*lbr_sel_map;		   /* lbr_select mappings */
+	unsigned int	lbr_tos, lbr_from, lbr_to,
+			lbr_info, lbr_nr;	   /* LBR base regs and size */
+	union {
+		u64	lbr_sel_mask;		   /* LBR_SELECT valid bits */
+		u64	lbr_ctl_mask;		   /* LBR_CTL valid bits */
+	};
+	union {
+		const int	*lbr_sel_map;	   /* lbr_select mappings */
+		int		*lbr_ctl_map;	   /* LBR_CTL mappings */
+	};
 	bool		lbr_double_abort;	   /* duplicated lbr aborts */
 	bool		lbr_pt_coexist;		   /* (LBR|BTS) may coexist with PT */
 
 	/*
+	 * Intel Architectural LBR CPUID Enumeration
+	 */
+	unsigned int	lbr_depth_mask:8;
+	unsigned int	lbr_deep_c_reset:1;
+	unsigned int	lbr_lip:1;
+	unsigned int	lbr_cpl:1;
+	unsigned int	lbr_filter:1;
+	unsigned int	lbr_call_stack:1;
+	unsigned int	lbr_mispred:1;
+	unsigned int	lbr_timed_lbr:1;
+	unsigned int	lbr_br_type:1;
+
+	void		(*lbr_reset)(void);
+	void		(*lbr_read)(struct cpu_hw_events *cpuc);
+	void		(*lbr_save)(void *ctx);
+	void		(*lbr_restore)(void *ctx);
+
+	/*
 	 * Intel PT/LBR/BTS are exclusive
 	 */
 	atomic_t	lbr_exclusive[x86_lbr_exclusive_max];
@@ -718,17 +759,46 @@ struct x86_pmu {
 	int (*aux_output_match) (struct perf_event *event);
 };
 
-struct x86_perf_task_context {
-	u64 lbr_from[MAX_LBR_ENTRIES];
-	u64 lbr_to[MAX_LBR_ENTRIES];
-	u64 lbr_info[MAX_LBR_ENTRIES];
-	int tos;
-	int valid_lbrs;
+struct x86_perf_task_context_opt {
 	int lbr_callstack_users;
 	int lbr_stack_state;
 	int log_id;
 };
 
+struct x86_perf_task_context {
+	u64 lbr_sel;
+	int tos;
+	int valid_lbrs;
+	struct x86_perf_task_context_opt opt;
+	struct lbr_entry lbr[MAX_LBR_ENTRIES];
+};
+
+struct x86_perf_task_context_arch_lbr {
+	struct x86_perf_task_context_opt opt;
+	struct lbr_entry entries[];
+};
+
+/*
+ * Add padding to guarantee the 64-byte alignment of the state buffer.
+ *
+ * The structure is dynamically allocated. The size of the LBR state may vary
+ * based on the number of LBR registers.
+ *
+ * Do not put anything after the LBR state.
+ */
+struct x86_perf_task_context_arch_lbr_xsave {
+	struct x86_perf_task_context_opt		opt;
+
+	union {
+		struct xregs_state			xsave;
+		struct {
+			struct fxregs_state		i387;
+			struct xstate_header		header;
+			struct arch_lbr_state		lbr;
+		} __attribute__ ((packed, aligned (XSAVE_ALIGNMENT)));
+	};
+};
+
 #define x86_add_quirk(func_)						\
 do {									\
 	static struct x86_pmu_quirk __quirk __initdata = {		\
@@ -777,6 +847,14 @@ static struct perf_pmu_events_ht_attr event_attr_##v = {		\
 struct pmu *x86_get_pmu(void);
 extern struct x86_pmu x86_pmu __read_mostly;
 
+static __always_inline struct x86_perf_task_context_opt *task_context_opt(void *ctx)
+{
+	if (static_cpu_has(X86_FEATURE_ARCH_LBR))
+		return &((struct x86_perf_task_context_arch_lbr *)ctx)->opt;
+
+	return &((struct x86_perf_task_context *)ctx)->opt;
+}
+
 static inline bool x86_pmu_has_lbr_callstack(void)
 {
 	return  x86_pmu.lbr_sel_map &&
@@ -989,7 +1067,10 @@ void release_ds_buffers(void);
 
 void reserve_ds_buffers(void);
 
+void release_lbr_buffers(void);
+
 extern struct event_constraint bts_constraint;
+extern struct event_constraint vlbr_constraint;
 
 void intel_pmu_enable_bts(u64 config);
 
@@ -1041,7 +1122,7 @@ void intel_pmu_pebs_sched_task(struct perf_event_context *ctx, bool sched_in);
 
 void intel_pmu_auto_reload_read(struct perf_event *event);
 
-void intel_pmu_store_pebs_lbrs(struct pebs_lbr *lbr);
+void intel_pmu_store_pebs_lbrs(struct lbr_entry *lbr);
 
 void intel_ds_init(void);
 
@@ -1054,6 +1135,10 @@ u64 lbr_from_signext_quirk_wr(u64 val);
 
 void intel_pmu_lbr_reset(void);
 
+void intel_pmu_lbr_reset_32(void);
+
+void intel_pmu_lbr_reset_64(void);
+
 void intel_pmu_lbr_add(struct perf_event *event);
 
 void intel_pmu_lbr_del(struct perf_event *event);
@@ -1064,6 +1149,14 @@ void intel_pmu_lbr_disable_all(void);
 
 void intel_pmu_lbr_read(void);
 
+void intel_pmu_lbr_read_32(struct cpu_hw_events *cpuc);
+
+void intel_pmu_lbr_read_64(struct cpu_hw_events *cpuc);
+
+void intel_pmu_lbr_save(void *ctx);
+
+void intel_pmu_lbr_restore(void *ctx);
+
 void intel_pmu_lbr_init_core(void);
 
 void intel_pmu_lbr_init_nhm(void);
@@ -1080,6 +1173,8 @@ void intel_pmu_lbr_init_skl(void);
 
 void intel_pmu_lbr_init_knl(void);
 
+void intel_pmu_arch_lbr_init(void);
+
 void intel_pmu_pebs_data_source_nhm(void);
 
 void intel_pmu_pebs_data_source_skl(bool pmem);
@@ -1115,6 +1210,10 @@ static inline void release_ds_buffers(void)
 {
 }
 
+static inline void release_lbr_buffers(void)
+{
+}
+
 static inline int intel_pmu_init(void)
 {
 	return 0;
diff --git a/arch/x86/events/rapl.c b/arch/x86/events/rapl.c
index 0f2bf59f4354..68b38820b10e 100644
--- a/arch/x86/events/rapl.c
+++ b/arch/x86/events/rapl.c
@@ -787,7 +787,8 @@ static const struct x86_cpu_id rapl_model_match[] __initconst = {
 	X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_X,		&model_hsx),
 	X86_MATCH_INTEL_FAM6_MODEL(COMETLAKE_L,		&model_skl),
 	X86_MATCH_INTEL_FAM6_MODEL(COMETLAKE,		&model_skl),
-	X86_MATCH_VENDOR_FAM(AMD, 0x17, &model_amd_fam17h),
+	X86_MATCH_VENDOR_FAM(AMD,	0x17,		&model_amd_fam17h),
+	X86_MATCH_VENDOR_FAM(HYGON,	0x18,		&model_amd_fam17h),
 	{},
 };
 MODULE_DEVICE_TABLE(x86cpu, rapl_model_match);
diff --git a/arch/x86/events/zhaoxin/core.c b/arch/x86/events/zhaoxin/core.c
index 898fa1ae9ceb..e68827e604ad 100644
--- a/arch/x86/events/zhaoxin/core.c
+++ b/arch/x86/events/zhaoxin/core.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Zhoaxin PMU; like Intel Architectural PerfMon-v2
+ * Zhaoxin PMU; like Intel Architectural PerfMon-v2
  */
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
diff --git a/arch/x86/hyperv/hv_init.c b/arch/x86/hyperv/hv_init.c
index a54c6a401581..6035df1b49e1 100644
--- a/arch/x86/hyperv/hv_init.c
+++ b/arch/x86/hyperv/hv_init.c
@@ -375,7 +375,10 @@ void __init hyperv_init(void)
 	guest_id = generate_guest_id(0, LINUX_VERSION_CODE, 0);
 	wrmsrl(HV_X64_MSR_GUEST_OS_ID, guest_id);
 
-	hv_hypercall_pg = vmalloc_exec(PAGE_SIZE);
+	hv_hypercall_pg = __vmalloc_node_range(PAGE_SIZE, 1, VMALLOC_START,
+			VMALLOC_END, GFP_KERNEL, PAGE_KERNEL_ROX,
+			VM_FLUSH_RESET_PERMS, NUMA_NO_NODE,
+			__builtin_return_address(0));
 	if (hv_hypercall_pg == NULL) {
 		wrmsrl(HV_X64_MSR_GUEST_OS_ID, 0);
 		goto remove_cpuhp_state;
diff --git a/arch/x86/include/asm/asm.h b/arch/x86/include/asm/asm.h
index 0f63585edf5f..5c15f95b1ba7 100644
--- a/arch/x86/include/asm/asm.h
+++ b/arch/x86/include/asm/asm.h
@@ -144,7 +144,7 @@
 	_ASM_PTR (entry);					\
 	.popsection
 
-#else
+#else /* ! __ASSEMBLY__ */
 # define _EXPAND_EXTABLE_HANDLE(x) #x
 # define _ASM_EXTABLE_HANDLE(from, to, handler)			\
 	" .pushsection \"__ex_table\",\"a\"\n"			\
@@ -164,9 +164,7 @@
 	_ASM_EXTABLE_HANDLE(from, to, ex_handler_fault)
 
 /* For C file, we already have NOKPROBE_SYMBOL macro */
-#endif
 
-#ifndef __ASSEMBLY__
 /*
  * This output constraint should be used for any inline asm which has a "call"
  * instruction.  Otherwise the asm may be inserted before the frame pointer
@@ -175,6 +173,6 @@
  */
 register unsigned long current_stack_pointer asm(_ASM_SP);
 #define ASM_CALL_CONSTRAINT "+r" (current_stack_pointer)
-#endif
+#endif /* __ASSEMBLY__ */
 
 #endif /* _ASM_X86_ASM_H */
diff --git a/arch/x86/include/asm/atomic.h b/arch/x86/include/asm/atomic.h
index bf35e476a776..b6cac6e9bb70 100644
--- a/arch/x86/include/asm/atomic.h
+++ b/arch/x86/include/asm/atomic.h
@@ -14,8 +14,6 @@
  * resource counting etc..
  */
 
-#define ATOMIC_INIT(i)	{ (i) }
-
 /**
  * arch_atomic_read - read atomic variable
  * @v: pointer of type atomic_t
diff --git a/arch/x86/include/asm/bitops.h b/arch/x86/include/asm/bitops.h
index 35460fef39b8..0367efdc5b7a 100644
--- a/arch/x86/include/asm/bitops.h
+++ b/arch/x86/include/asm/bitops.h
@@ -201,12 +201,8 @@ arch_test_and_change_bit(long nr, volatile unsigned long *addr)
 	return GEN_BINARY_RMWcc(LOCK_PREFIX __ASM_SIZE(btc), *addr, c, "Ir", nr);
 }
 
-static __no_kcsan_or_inline bool constant_test_bit(long nr, const volatile unsigned long *addr)
+static __always_inline bool constant_test_bit(long nr, const volatile unsigned long *addr)
 {
-	/*
-	 * Because this is a plain access, we need to disable KCSAN here to
-	 * avoid double instrumentation via instrumented bitops.
-	 */
 	return ((1UL << (nr & (BITS_PER_LONG-1))) &
 		(addr[nr >> _BITOPS_LONG_SHIFT])) != 0;
 }
diff --git a/arch/x86/include/asm/boot.h b/arch/x86/include/asm/boot.h
index 680c320363db..9191280d9ea3 100644
--- a/arch/x86/include/asm/boot.h
+++ b/arch/x86/include/asm/boot.h
@@ -24,9 +24,16 @@
 # error "Invalid value for CONFIG_PHYSICAL_ALIGN"
 #endif
 
-#ifdef CONFIG_KERNEL_BZIP2
+#if defined(CONFIG_KERNEL_BZIP2)
 # define BOOT_HEAP_SIZE		0x400000
-#else /* !CONFIG_KERNEL_BZIP2 */
+#elif defined(CONFIG_KERNEL_ZSTD)
+/*
+ * Zstd needs to allocate the ZSTD_DCtx in order to decompress the kernel.
+ * The ZSTD_DCtx is ~160KB, so set the heap size to 192KB because it is a
+ * round number and to allow some slack.
+ */
+# define BOOT_HEAP_SIZE		 0x30000
+#else
 # define BOOT_HEAP_SIZE		 0x10000
 #endif
 
diff --git a/arch/x86/include/asm/bug.h b/arch/x86/include/asm/bug.h
index fb34ff641e0a..297fa12e7e27 100644
--- a/arch/x86/include/asm/bug.h
+++ b/arch/x86/include/asm/bug.h
@@ -3,6 +3,7 @@
 #define _ASM_X86_BUG_H
 
 #include <linux/stringify.h>
+#include <linux/instrumentation.h>
 
 /*
  * Despite that some emulators terminate on UD2, we use it for WARN().
@@ -75,6 +76,12 @@ do {								\
 	unreachable();						\
 } while (0)
 
+/*
+ * This instrumentation_begin() is strictly speaking incorrect; but it
+ * suppresses the complaints from WARN()s in noinstr code. If such a WARN()
+ * were to trigger, we'd rather wreck the machine in an attempt to get the
+ * message out than not know about it.
+ */
 #define __WARN_FLAGS(flags)					\
 do {								\
 	instrumentation_begin();				\
diff --git a/arch/x86/include/asm/cmpxchg_32.h b/arch/x86/include/asm/cmpxchg_32.h
index 1a2eafca7038..0a7fe0321613 100644
--- a/arch/x86/include/asm/cmpxchg_32.h
+++ b/arch/x86/include/asm/cmpxchg_32.h
@@ -3,7 +3,7 @@
 #define _ASM_X86_CMPXCHG_32_H
 
 /*
- * Note: if you use set64_bit(), __cmpxchg64(), or their variants, you
+ * Note: if you use set64_bit(), __cmpxchg64(), or their variants,
  *       you need to test for the feature in boot_cpu_data.
  */
 
diff --git a/arch/x86/include/asm/cpu.h b/arch/x86/include/asm/cpu.h
index dd17c2da1af5..da78ccbd493b 100644
--- a/arch/x86/include/asm/cpu.h
+++ b/arch/x86/include/asm/cpu.h
@@ -58,4 +58,9 @@ static inline bool handle_guest_split_lock(unsigned long ip)
 	return false;
 }
 #endif
+#ifdef CONFIG_IA32_FEAT_CTL
+void init_ia32_feat_ctl(struct cpuinfo_x86 *c);
+#else
+static inline void init_ia32_feat_ctl(struct cpuinfo_x86 *c) {}
+#endif
 #endif /* _ASM_X86_CPU_H */
diff --git a/arch/x86/include/asm/cpufeatures.h b/arch/x86/include/asm/cpufeatures.h
index 02dabc9e77b0..2901d5df4366 100644
--- a/arch/x86/include/asm/cpufeatures.h
+++ b/arch/x86/include/asm/cpufeatures.h
@@ -96,6 +96,7 @@
 #define X86_FEATURE_SYSCALL32		( 3*32+14) /* "" syscall in IA32 userspace */
 #define X86_FEATURE_SYSENTER32		( 3*32+15) /* "" sysenter in IA32 userspace */
 #define X86_FEATURE_REP_GOOD		( 3*32+16) /* REP microcode works well */
+/* free					( 3*32+17) */
 #define X86_FEATURE_LFENCE_RDTSC	( 3*32+18) /* "" LFENCE synchronizes RDTSC */
 #define X86_FEATURE_ACC_POWER		( 3*32+19) /* AMD Accumulated Power Mechanism */
 #define X86_FEATURE_NOPL		( 3*32+20) /* The NOPL (0F 1F) instructions */
@@ -107,6 +108,7 @@
 #define X86_FEATURE_EXTD_APICID		( 3*32+26) /* Extended APICID (8 bits) */
 #define X86_FEATURE_AMD_DCM		( 3*32+27) /* AMD multi-node processor */
 #define X86_FEATURE_APERFMPERF		( 3*32+28) /* P-State hardware coordination feedback capability (APERF/MPERF MSRs) */
+/* free					( 3*32+29) */
 #define X86_FEATURE_NONSTOP_TSC_S3	( 3*32+30) /* TSC doesn't stop in S3 state */
 #define X86_FEATURE_TSC_KNOWN_FREQ	( 3*32+31) /* TSC has known frequency */
 
@@ -365,7 +367,9 @@
 #define X86_FEATURE_SRBDS_CTRL		(18*32+ 9) /* "" SRBDS mitigation MSR available */
 #define X86_FEATURE_MD_CLEAR		(18*32+10) /* VERW clears CPU buffers */
 #define X86_FEATURE_TSX_FORCE_ABORT	(18*32+13) /* "" TSX_FORCE_ABORT */
+#define X86_FEATURE_SERIALIZE		(18*32+14) /* SERIALIZE instruction */
 #define X86_FEATURE_PCONFIG		(18*32+18) /* Intel PCONFIG */
+#define X86_FEATURE_ARCH_LBR		(18*32+19) /* Intel ARCH LBR */
 #define X86_FEATURE_SPEC_CTRL		(18*32+26) /* "" Speculation Control (IBRS + IBPB) */
 #define X86_FEATURE_INTEL_STIBP		(18*32+27) /* "" Single Thread Indirect Branch Predictors */
 #define X86_FEATURE_FLUSH_L1D		(18*32+28) /* Flush L1D cache */
diff --git a/arch/x86/include/asm/cpumask.h b/arch/x86/include/asm/cpumask.h
index 6722ffcef2e6..3afa990d756b 100644
--- a/arch/x86/include/asm/cpumask.h
+++ b/arch/x86/include/asm/cpumask.h
@@ -11,5 +11,23 @@ extern cpumask_var_t cpu_sibling_setup_mask;
 
 extern void setup_cpu_local_masks(void);
 
+/*
+ * NMI and MCE exceptions need cpu_is_offline() _really_ early,
+ * provide an arch_ special for them to avoid instrumentation.
+ */
+#if NR_CPUS > 1
+static __always_inline bool arch_cpu_online(int cpu)
+{
+	return arch_test_bit(cpu, cpumask_bits(cpu_online_mask));
+}
+#else
+static __always_inline bool arch_cpu_online(int cpu)
+{
+	return cpu == 0;
+}
+#endif
+
+#define arch_cpu_is_offline(cpu)	unlikely(!arch_cpu_online(cpu))
+
 #endif /* __ASSEMBLY__ */
 #endif /* _ASM_X86_CPUMASK_H */
diff --git a/arch/x86/include/asm/div64.h b/arch/x86/include/asm/div64.h
index 9b8cb50768c2..b8f1dc0761e4 100644
--- a/arch/x86/include/asm/div64.h
+++ b/arch/x86/include/asm/div64.h
@@ -74,16 +74,26 @@ static inline u64 mul_u32_u32(u32 a, u32 b)
 #else
 # include <asm-generic/div64.h>
 
-static inline u64 mul_u64_u32_div(u64 a, u32 mul, u32 div)
+/*
+ * Will generate an #DE when the result doesn't fit u64, could fix with an
+ * __ex_table[] entry when it becomes an issue.
+ */
+static inline u64 mul_u64_u64_div_u64(u64 a, u64 mul, u64 div)
 {
 	u64 q;
 
 	asm ("mulq %2; divq %3" : "=a" (q)
-				: "a" (a), "rm" ((u64)mul), "rm" ((u64)div)
+				: "a" (a), "rm" (mul), "rm" (div)
 				: "rdx");
 
 	return q;
 }
+#define mul_u64_u64_div_u64 mul_u64_u64_div_u64
+
+static inline u64 mul_u64_u32_div(u64 a, u32 mul, u32 div)
+{
+	return mul_u64_u64_div_u64(a, mul, div);
+}
 #define mul_u64_u32_div	mul_u64_u32_div
 
 #endif /* CONFIG_X86_32 */
diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h
index e7d2ccfdd507..b9c2667ac46c 100644
--- a/arch/x86/include/asm/efi.h
+++ b/arch/x86/include/asm/efi.h
@@ -22,17 +22,7 @@ extern unsigned long efi_fw_vendor, efi_config_table;
  *
  * This is the main reason why we're doing stable VA mappings for RT
  * services.
- *
- * SGI UV1 machines are known to be incompatible with this scheme, so we
- * provide an opt-out for these machines via a DMI quirk that sets the
- * attribute below.
  */
-#define EFI_UV1_MEMMAP         EFI_ARCH_1
-
-static inline bool efi_have_uv1_memmap(void)
-{
-	return IS_ENABLED(CONFIG_X86_UV) && efi_enabled(EFI_UV1_MEMMAP);
-}
 
 #define EFI32_LOADER_SIGNATURE	"EL32"
 #define EFI64_LOADER_SIGNATURE	"EL64"
@@ -122,9 +112,7 @@ struct efi_scratch {
 	efi_sync_low_kernel_mappings();					\
 	kernel_fpu_begin();						\
 	firmware_restrict_branch_speculation_start();			\
-									\
-	if (!efi_have_uv1_memmap())					\
-		efi_switch_mm(&efi_mm);					\
+	efi_switch_mm(&efi_mm);						\
 })
 
 #define arch_efi_call_virt(p, f, args...)				\
@@ -132,9 +120,7 @@ struct efi_scratch {
 
 #define arch_efi_call_virt_teardown()					\
 ({									\
-	if (!efi_have_uv1_memmap())					\
-		efi_switch_mm(efi_scratch.prev_mm);			\
-									\
+	efi_switch_mm(efi_scratch.prev_mm);				\
 	firmware_restrict_branch_speculation_end();			\
 	kernel_fpu_end();						\
 })
@@ -176,8 +162,6 @@ extern void efi_delete_dummy_variable(void);
 extern void efi_switch_mm(struct mm_struct *mm);
 extern void efi_recover_from_page_fault(unsigned long phys_addr);
 extern void efi_free_boot_services(void);
-extern pgd_t * __init efi_uv1_memmap_phys_prolog(void);
-extern void __init efi_uv1_memmap_phys_epilog(pgd_t *save_pgd);
 
 /* kexec external ABI */
 struct efi_setup_data {
diff --git a/arch/x86/include/asm/entry-common.h b/arch/x86/include/asm/entry-common.h
new file mode 100644
index 000000000000..a8f9315b9eae
--- /dev/null
+++ b/arch/x86/include/asm/entry-common.h
@@ -0,0 +1,76 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef _ASM_X86_ENTRY_COMMON_H
+#define _ASM_X86_ENTRY_COMMON_H
+
+#include <linux/user-return-notifier.h>
+
+#include <asm/nospec-branch.h>
+#include <asm/io_bitmap.h>
+#include <asm/fpu/api.h>
+
+/* Check that the stack and regs on entry from user mode are sane. */
+static __always_inline void arch_check_user_regs(struct pt_regs *regs)
+{
+	if (IS_ENABLED(CONFIG_DEBUG_ENTRY)) {
+		/*
+		 * Make sure that the entry code gave us a sensible EFLAGS
+		 * register.  Native because we want to check the actual CPU
+		 * state, not the interrupt state as imagined by Xen.
+		 */
+		unsigned long flags = native_save_fl();
+		WARN_ON_ONCE(flags & (X86_EFLAGS_AC | X86_EFLAGS_DF |
+				      X86_EFLAGS_NT));
+
+		/* We think we came from user mode. Make sure pt_regs agrees. */
+		WARN_ON_ONCE(!user_mode(regs));
+
+		/*
+		 * All entries from user mode (except #DF) should be on the
+		 * normal thread stack and should have user pt_regs in the
+		 * correct location.
+		 */
+		WARN_ON_ONCE(!on_thread_stack());
+		WARN_ON_ONCE(regs != task_pt_regs(current));
+	}
+}
+#define arch_check_user_regs arch_check_user_regs
+
+#define ARCH_SYSCALL_EXIT_WORK		(_TIF_SINGLESTEP)
+
+static inline void arch_exit_to_user_mode_prepare(struct pt_regs *regs,
+						  unsigned long ti_work)
+{
+	if (ti_work & _TIF_USER_RETURN_NOTIFY)
+		fire_user_return_notifiers();
+
+	if (unlikely(ti_work & _TIF_IO_BITMAP))
+		tss_update_io_bitmap();
+
+	fpregs_assert_state_consistent();
+	if (unlikely(ti_work & _TIF_NEED_FPU_LOAD))
+		switch_fpu_return();
+
+#ifdef CONFIG_COMPAT
+	/*
+	 * Compat syscalls set TS_COMPAT.  Make sure we clear it before
+	 * returning to user mode.  We need to clear it *after* signal
+	 * handling, because syscall restart has a fixup for compat
+	 * syscalls.  The fixup is exercised by the ptrace_syscall_32
+	 * selftest.
+	 *
+	 * We also need to clear TS_REGS_POKED_I386: the 32-bit tracer
+	 * special case only applies after poking regs and before the
+	 * very next return to user mode.
+	 */
+	current_thread_info()->status &= ~(TS_COMPAT | TS_I386_REGS_POKED);
+#endif
+}
+#define arch_exit_to_user_mode_prepare arch_exit_to_user_mode_prepare
+
+static __always_inline void arch_exit_to_user_mode(void)
+{
+	mds_user_clear_cpu_buffers();
+}
+#define arch_exit_to_user_mode arch_exit_to_user_mode
+
+#endif
diff --git a/arch/x86/include/asm/fpu/internal.h b/arch/x86/include/asm/fpu/internal.h
index 42159f45bf9c..6b10cdaa7c96 100644
--- a/arch/x86/include/asm/fpu/internal.h
+++ b/arch/x86/include/asm/fpu/internal.h
@@ -274,7 +274,7 @@ static inline void copy_fxregs_to_kernel(struct fpu *fpu)
  */
 static inline void copy_xregs_to_kernel_booting(struct xregs_state *xstate)
 {
-	u64 mask = -1;
+	u64 mask = xfeatures_mask_all;
 	u32 lmask = mask;
 	u32 hmask = mask >> 32;
 	int err;
@@ -320,7 +320,7 @@ static inline void copy_kernel_to_xregs_booting(struct xregs_state *xstate)
  */
 static inline void copy_xregs_to_kernel(struct xregs_state *xstate)
 {
-	u64 mask = -1;
+	u64 mask = xfeatures_mask_all;
 	u32 lmask = mask;
 	u32 hmask = mask >> 32;
 	int err;
@@ -356,6 +356,9 @@ static inline void copy_kernel_to_xregs(struct xregs_state *xstate, u64 mask)
  */
 static inline int copy_xregs_to_user(struct xregs_state __user *buf)
 {
+	u64 mask = xfeatures_mask_user();
+	u32 lmask = mask;
+	u32 hmask = mask >> 32;
 	int err;
 
 	/*
@@ -367,7 +370,7 @@ static inline int copy_xregs_to_user(struct xregs_state __user *buf)
 		return -EFAULT;
 
 	stac();
-	XSTATE_OP(XSAVE, buf, -1, -1, err);
+	XSTATE_OP(XSAVE, buf, lmask, hmask, err);
 	clac();
 
 	return err;
@@ -408,43 +411,7 @@ static inline int copy_kernel_to_xregs_err(struct xregs_state *xstate, u64 mask)
 	return err;
 }
 
-/*
- * These must be called with preempt disabled. Returns
- * 'true' if the FPU state is still intact and we can
- * keep registers active.
- *
- * The legacy FNSAVE instruction cleared all FPU state
- * unconditionally, so registers are essentially destroyed.
- * Modern FPU state can be kept in registers, if there are
- * no pending FP exceptions.
- */
-static inline int copy_fpregs_to_fpstate(struct fpu *fpu)
-{
-	if (likely(use_xsave())) {
-		copy_xregs_to_kernel(&fpu->state.xsave);
-
-		/*
-		 * AVX512 state is tracked here because its use is
-		 * known to slow the max clock speed of the core.
-		 */
-		if (fpu->state.xsave.header.xfeatures & XFEATURE_MASK_AVX512)
-			fpu->avx512_timestamp = jiffies;
-		return 1;
-	}
-
-	if (likely(use_fxsr())) {
-		copy_fxregs_to_kernel(fpu);
-		return 1;
-	}
-
-	/*
-	 * Legacy FPU register saving, FNSAVE always clears FPU registers,
-	 * so we have to mark them inactive:
-	 */
-	asm volatile("fnsave %[fp]; fwait" : [fp] "=m" (fpu->state.fsave));
-
-	return 0;
-}
+extern int copy_fpregs_to_fpstate(struct fpu *fpu);
 
 static inline void __copy_kernel_to_fpregs(union fpregs_state *fpstate, u64 mask)
 {
@@ -623,6 +590,11 @@ static inline void switch_fpu_finish(struct fpu *new_fpu)
  * MXCSR and XCR definitions:
  */
 
+static inline void ldmxcsr(u32 mxcsr)
+{
+	asm volatile("ldmxcsr %0" :: "m" (mxcsr));
+}
+
 extern unsigned int mxcsr_feature_mask;
 
 #define XCR_XFEATURE_ENABLED_MASK	0x00000000
diff --git a/arch/x86/include/asm/fpu/types.h b/arch/x86/include/asm/fpu/types.h
index f098f6cab94b..c87364ea6446 100644
--- a/arch/x86/include/asm/fpu/types.h
+++ b/arch/x86/include/asm/fpu/types.h
@@ -114,6 +114,12 @@ enum xfeature {
 	XFEATURE_Hi16_ZMM,
 	XFEATURE_PT_UNIMPLEMENTED_SO_FAR,
 	XFEATURE_PKRU,
+	XFEATURE_RSRVD_COMP_10,
+	XFEATURE_RSRVD_COMP_11,
+	XFEATURE_RSRVD_COMP_12,
+	XFEATURE_RSRVD_COMP_13,
+	XFEATURE_RSRVD_COMP_14,
+	XFEATURE_LBR,
 
 	XFEATURE_MAX,
 };
@@ -128,6 +134,7 @@ enum xfeature {
 #define XFEATURE_MASK_Hi16_ZMM		(1 << XFEATURE_Hi16_ZMM)
 #define XFEATURE_MASK_PT		(1 << XFEATURE_PT_UNIMPLEMENTED_SO_FAR)
 #define XFEATURE_MASK_PKRU		(1 << XFEATURE_PKRU)
+#define XFEATURE_MASK_LBR		(1 << XFEATURE_LBR)
 
 #define XFEATURE_MASK_FPSSE		(XFEATURE_MASK_FP | XFEATURE_MASK_SSE)
 #define XFEATURE_MASK_AVX512		(XFEATURE_MASK_OPMASK \
@@ -229,6 +236,26 @@ struct pkru_state {
 	u32				pad;
 } __packed;
 
+/*
+ * State component 15: Architectural LBR configuration state.
+ * The size of Arch LBR state depends on the number of LBRs (lbr_depth).
+ */
+
+struct lbr_entry {
+	u64 from;
+	u64 to;
+	u64 info;
+};
+
+struct arch_lbr_state {
+	u64 lbr_ctl;
+	u64 lbr_depth;
+	u64 ler_from;
+	u64 ler_to;
+	u64 ler_info;
+	struct lbr_entry		entries[];
+} __packed;
+
 struct xstate_header {
 	u64				xfeatures;
 	u64				xcomp_bv;
diff --git a/arch/x86/include/asm/fpu/xstate.h b/arch/x86/include/asm/fpu/xstate.h
index 422d8369012a..1559554af931 100644
--- a/arch/x86/include/asm/fpu/xstate.h
+++ b/arch/x86/include/asm/fpu/xstate.h
@@ -21,6 +21,8 @@
 #define XSAVE_YMM_SIZE	    256
 #define XSAVE_YMM_OFFSET    (XSAVE_HDR_SIZE + XSAVE_HDR_OFFSET)
 
+#define XSAVE_ALIGNMENT     64
+
 /* All currently supported user features */
 #define XFEATURE_MASK_USER_SUPPORTED (XFEATURE_MASK_FP | \
 				      XFEATURE_MASK_SSE | \
@@ -36,6 +38,27 @@
 #define XFEATURE_MASK_SUPERVISOR_SUPPORTED (0)
 
 /*
+ * A supervisor state component may not always contain valuable information,
+ * and its size may be huge. Saving/restoring such supervisor state components
+ * at each context switch can cause high CPU and space overhead, which should
+ * be avoided. Such supervisor state components should only be saved/restored
+ * on demand. The on-demand dynamic supervisor features are set in this mask.
+ *
+ * Unlike the existing supported supervisor features, a dynamic supervisor
+ * feature does not allocate a buffer in task->fpu, and the corresponding
+ * supervisor state component cannot be saved/restored at each context switch.
+ *
+ * To support a dynamic supervisor feature, a developer should follow the
+ * dos and don'ts as below:
+ * - Do dynamically allocate a buffer for the supervisor state component.
+ * - Do manually invoke the XSAVES/XRSTORS instruction to save/restore the
+ *   state component to/from the buffer.
+ * - Don't set the bit corresponding to the dynamic supervisor feature in
+ *   IA32_XSS at run time, since it has been set at boot time.
+ */
+#define XFEATURE_MASK_DYNAMIC (XFEATURE_MASK_LBR)
+
+/*
  * Unsupported supervisor features. When a supervisor feature in this mask is
  * supported in the future, move it to the supported supervisor feature mask.
  */
@@ -43,6 +66,7 @@
 
 /* All supervisor states including supported and unsupported states. */
 #define XFEATURE_MASK_SUPERVISOR_ALL (XFEATURE_MASK_SUPERVISOR_SUPPORTED | \
+				      XFEATURE_MASK_DYNAMIC | \
 				      XFEATURE_MASK_SUPERVISOR_UNSUPPORTED)
 
 #ifdef CONFIG_X86_64
@@ -63,6 +87,14 @@ static inline u64 xfeatures_mask_user(void)
 	return xfeatures_mask_all & XFEATURE_MASK_USER_SUPPORTED;
 }
 
+static inline u64 xfeatures_mask_dynamic(void)
+{
+	if (!boot_cpu_has(X86_FEATURE_ARCH_LBR))
+		return XFEATURE_MASK_DYNAMIC & ~XFEATURE_MASK_LBR;
+
+	return XFEATURE_MASK_DYNAMIC;
+}
+
 extern u64 xstate_fx_sw_bytes[USER_XSTATE_FX_SW_WORDS];
 
 extern void __init update_regset_xstate_info(unsigned int size,
@@ -71,11 +103,15 @@ extern void __init update_regset_xstate_info(unsigned int size,
 void *get_xsave_addr(struct xregs_state *xsave, int xfeature_nr);
 const void *get_xsave_field_ptr(int xfeature_nr);
 int using_compacted_format(void);
+int xfeature_size(int xfeature_nr);
 int copy_xstate_to_kernel(void *kbuf, struct xregs_state *xsave, unsigned int offset, unsigned int size);
 int copy_xstate_to_user(void __user *ubuf, struct xregs_state *xsave, unsigned int offset, unsigned int size);
 int copy_kernel_to_xstate(struct xregs_state *xsave, const void *kbuf);
 int copy_user_to_xstate(struct xregs_state *xsave, const void __user *ubuf);
 void copy_supervisor_to_kernel(struct xregs_state *xsave);
+void copy_dynamic_supervisor_to_kernel(struct xregs_state *xstate, u64 mask);
+void copy_kernel_to_dynamic_supervisor(struct xregs_state *xstate, u64 mask);
+
 
 /* Validate an xstate header supplied by userspace (ptrace or sigreturn) */
 int validate_user_xstate_header(const struct xstate_header *hdr);
diff --git a/arch/x86/include/asm/fsgsbase.h b/arch/x86/include/asm/fsgsbase.h
index bca4c743de77..d552646411a9 100644
--- a/arch/x86/include/asm/fsgsbase.h
+++ b/arch/x86/include/asm/fsgsbase.h
@@ -19,36 +19,65 @@ extern unsigned long x86_gsbase_read_task(struct task_struct *task);
 extern void x86_fsbase_write_task(struct task_struct *task, unsigned long fsbase);
 extern void x86_gsbase_write_task(struct task_struct *task, unsigned long gsbase);
 
-/* Helper functions for reading/writing FS/GS base */
+/* Must be protected by X86_FEATURE_FSGSBASE check. */
 
-static inline unsigned long x86_fsbase_read_cpu(void)
+static __always_inline unsigned long rdfsbase(void)
 {
 	unsigned long fsbase;
 
-	rdmsrl(MSR_FS_BASE, fsbase);
+	asm volatile("rdfsbase %0" : "=r" (fsbase) :: "memory");
 
 	return fsbase;
 }
 
-static inline unsigned long x86_gsbase_read_cpu_inactive(void)
+static __always_inline unsigned long rdgsbase(void)
 {
 	unsigned long gsbase;
 
-	rdmsrl(MSR_KERNEL_GS_BASE, gsbase);
+	asm volatile("rdgsbase %0" : "=r" (gsbase) :: "memory");
 
 	return gsbase;
 }
 
-static inline void x86_fsbase_write_cpu(unsigned long fsbase)
+static __always_inline void wrfsbase(unsigned long fsbase)
 {
-	wrmsrl(MSR_FS_BASE, fsbase);
+	asm volatile("wrfsbase %0" :: "r" (fsbase) : "memory");
 }
 
-static inline void x86_gsbase_write_cpu_inactive(unsigned long gsbase)
+static __always_inline void wrgsbase(unsigned long gsbase)
 {
-	wrmsrl(MSR_KERNEL_GS_BASE, gsbase);
+	asm volatile("wrgsbase %0" :: "r" (gsbase) : "memory");
 }
 
+#include <asm/cpufeature.h>
+
+/* Helper functions for reading/writing FS/GS base */
+
+static inline unsigned long x86_fsbase_read_cpu(void)
+{
+	unsigned long fsbase;
+
+	if (static_cpu_has(X86_FEATURE_FSGSBASE))
+		fsbase = rdfsbase();
+	else
+		rdmsrl(MSR_FS_BASE, fsbase);
+
+	return fsbase;
+}
+
+static inline void x86_fsbase_write_cpu(unsigned long fsbase)
+{
+	if (static_cpu_has(X86_FEATURE_FSGSBASE))
+		wrfsbase(fsbase);
+	else
+		wrmsrl(MSR_FS_BASE, fsbase);
+}
+
+extern unsigned long x86_gsbase_read_cpu_inactive(void);
+extern void x86_gsbase_write_cpu_inactive(unsigned long gsbase);
+extern unsigned long x86_fsgsbase_read_task(struct task_struct *task,
+					    unsigned short selector);
+
 #endif /* CONFIG_X86_64 */
 
 #endif /* __ASSEMBLY__ */
diff --git a/arch/x86/include/asm/idtentry.h b/arch/x86/include/asm/idtentry.h
index cf51c50eb356..ff198fc2495e 100644
--- a/arch/x86/include/asm/idtentry.h
+++ b/arch/x86/include/asm/idtentry.h
@@ -6,15 +6,13 @@
 #include <asm/trapnr.h>
 
 #ifndef __ASSEMBLY__
+#include <linux/entry-common.h>
 #include <linux/hardirq.h>
 
 #include <asm/irq_stack.h>
 
-void idtentry_enter_user(struct pt_regs *regs);
-void idtentry_exit_user(struct pt_regs *regs);
-
-bool idtentry_enter_cond_rcu(struct pt_regs *regs);
-void idtentry_exit_cond_rcu(struct pt_regs *regs, bool rcu_exit);
+bool idtentry_enter_nmi(struct pt_regs *regs);
+void idtentry_exit_nmi(struct pt_regs *regs, bool irq_state);
 
 /**
  * DECLARE_IDTENTRY - Declare functions for simple IDT entry points
@@ -45,8 +43,8 @@ void idtentry_exit_cond_rcu(struct pt_regs *regs, bool rcu_exit);
  * The macro is written so it acts as function definition. Append the
  * body with a pair of curly brackets.
  *
- * idtentry_enter() contains common code which has to be invoked before
- * arbitrary code in the body. idtentry_exit() contains common code
+ * irqentry_enter() contains common code which has to be invoked before
+ * arbitrary code in the body. irqentry_exit() contains common code
  * which has to run before returning to the low level assembly code.
  */
 #define DEFINE_IDTENTRY(func)						\
@@ -54,12 +52,12 @@ static __always_inline void __##func(struct pt_regs *regs);		\
 									\
 __visible noinstr void func(struct pt_regs *regs)			\
 {									\
-	bool rcu_exit = idtentry_enter_cond_rcu(regs);			\
+	irqentry_state_t state = irqentry_enter(regs);			\
 									\
 	instrumentation_begin();					\
 	__##func (regs);						\
 	instrumentation_end();						\
-	idtentry_exit_cond_rcu(regs, rcu_exit);				\
+	irqentry_exit(regs, state);					\
 }									\
 									\
 static __always_inline void __##func(struct pt_regs *regs)
@@ -101,12 +99,12 @@ static __always_inline void __##func(struct pt_regs *regs,		\
 __visible noinstr void func(struct pt_regs *regs,			\
 			    unsigned long error_code)			\
 {									\
-	bool rcu_exit = idtentry_enter_cond_rcu(regs);			\
+	irqentry_state_t state = irqentry_enter(regs);			\
 									\
 	instrumentation_begin();					\
 	__##func (regs, error_code);					\
 	instrumentation_end();						\
-	idtentry_exit_cond_rcu(regs, rcu_exit);				\
+	irqentry_exit(regs, state);					\
 }									\
 									\
 static __always_inline void __##func(struct pt_regs *regs,		\
@@ -161,7 +159,7 @@ __visible noinstr void func(struct pt_regs *regs)
  * body with a pair of curly brackets.
  *
  * Contrary to DEFINE_IDTENTRY_ERRORCODE() this does not invoke the
- * idtentry_enter/exit() helpers before and after the body invocation. This
+ * irqentry_enter/exit() helpers before and after the body invocation. This
  * needs to be done in the body itself if applicable. Use if extra work
  * is required before the enter/exit() helpers are invoked.
  */
@@ -187,11 +185,9 @@ __visible noinstr void func(struct pt_regs *regs, unsigned long error_code)
  * to the function as error_code argument which needs to be truncated
  * to an u8 because the push is sign extending.
  *
- * On 64-bit idtentry_enter/exit() are invoked in the ASM entry code before
- * and after switching to the interrupt stack. On 32-bit this happens in C.
- *
  * irq_enter/exit_rcu() are invoked before the function body and the
- * KVM L1D flush request is set.
+ * KVM L1D flush request is set. Stack switching to the interrupt stack
+ * has to be done in the function body if necessary.
  */
 #define DEFINE_IDTENTRY_IRQ(func)					\
 static __always_inline void __##func(struct pt_regs *regs, u8 vector);	\
@@ -199,7 +195,7 @@ static __always_inline void __##func(struct pt_regs *regs, u8 vector);	\
 __visible noinstr void func(struct pt_regs *regs,			\
 			    unsigned long error_code)			\
 {									\
-	bool rcu_exit = idtentry_enter_cond_rcu(regs);			\
+	irqentry_state_t state = irqentry_enter(regs);			\
 									\
 	instrumentation_begin();					\
 	irq_enter_rcu();						\
@@ -207,7 +203,7 @@ __visible noinstr void func(struct pt_regs *regs,			\
 	__##func (regs, (u8)error_code);				\
 	irq_exit_rcu();							\
 	instrumentation_end();						\
-	idtentry_exit_cond_rcu(regs, rcu_exit);				\
+	irqentry_exit(regs, state);					\
 }									\
 									\
 static __always_inline void __##func(struct pt_regs *regs, u8 vector)
@@ -231,7 +227,7 @@ static __always_inline void __##func(struct pt_regs *regs, u8 vector)
  * DEFINE_IDTENTRY_SYSVEC - Emit code for system vector IDT entry points
  * @func:	Function name of the entry point
  *
- * idtentry_enter/exit() and irq_enter/exit_rcu() are invoked before the
+ * irqentry_enter/exit() and irq_enter/exit_rcu() are invoked before the
  * function body. KVM L1D flush request is set.
  *
  * Runs the function on the interrupt stack if the entry hit kernel mode
@@ -241,7 +237,7 @@ static void __##func(struct pt_regs *regs);				\
 									\
 __visible noinstr void func(struct pt_regs *regs)			\
 {									\
-	bool rcu_exit = idtentry_enter_cond_rcu(regs);			\
+	irqentry_state_t state = irqentry_enter(regs);			\
 									\
 	instrumentation_begin();					\
 	irq_enter_rcu();						\
@@ -249,7 +245,7 @@ __visible noinstr void func(struct pt_regs *regs)			\
 	run_on_irqstack_cond(__##func, regs, regs);			\
 	irq_exit_rcu();							\
 	instrumentation_end();						\
-	idtentry_exit_cond_rcu(regs, rcu_exit);				\
+	irqentry_exit(regs, state);					\
 }									\
 									\
 static noinline void __##func(struct pt_regs *regs)
@@ -270,7 +266,7 @@ static __always_inline void __##func(struct pt_regs *regs);		\
 									\
 __visible noinstr void func(struct pt_regs *regs)			\
 {									\
-	bool rcu_exit = idtentry_enter_cond_rcu(regs);			\
+	irqentry_state_t state = irqentry_enter(regs);			\
 									\
 	instrumentation_begin();					\
 	__irq_enter_raw();						\
@@ -278,7 +274,7 @@ __visible noinstr void func(struct pt_regs *regs)			\
 	__##func (regs);						\
 	__irq_exit_raw();						\
 	instrumentation_end();						\
-	idtentry_exit_cond_rcu(regs, rcu_exit);				\
+	irqentry_exit(regs, state);					\
 }									\
 									\
 static __always_inline void __##func(struct pt_regs *regs)
@@ -353,10 +349,6 @@ static __always_inline void __##func(struct pt_regs *regs)
 
 #else	/* CONFIG_X86_64 */
 
-/* Maps to a regular IDTENTRY on 32bit for now */
-# define DECLARE_IDTENTRY_IST		DECLARE_IDTENTRY
-# define DEFINE_IDTENTRY_IST		DEFINE_IDTENTRY
-
 /**
  * DECLARE_IDTENTRY_DF - Declare functions for double fault 32bit variant
  * @vector:	Vector number (ignored for C)
@@ -387,28 +379,18 @@ __visible noinstr void func(struct pt_regs *regs,			\
 #endif	/* !CONFIG_X86_64 */
 
 /* C-Code mapping */
+#define DECLARE_IDTENTRY_NMI		DECLARE_IDTENTRY_RAW
+#define DEFINE_IDTENTRY_NMI		DEFINE_IDTENTRY_RAW
+
+#ifdef CONFIG_X86_64
 #define DECLARE_IDTENTRY_MCE		DECLARE_IDTENTRY_IST
 #define DEFINE_IDTENTRY_MCE		DEFINE_IDTENTRY_IST
 #define DEFINE_IDTENTRY_MCE_USER	DEFINE_IDTENTRY_NOIST
 
-#define DECLARE_IDTENTRY_NMI		DECLARE_IDTENTRY_RAW
-#define DEFINE_IDTENTRY_NMI		DEFINE_IDTENTRY_RAW
-
 #define DECLARE_IDTENTRY_DEBUG		DECLARE_IDTENTRY_IST
 #define DEFINE_IDTENTRY_DEBUG		DEFINE_IDTENTRY_IST
 #define DEFINE_IDTENTRY_DEBUG_USER	DEFINE_IDTENTRY_NOIST
-
-/**
- * DECLARE_IDTENTRY_XEN - Declare functions for XEN redirect IDT entry points
- * @vector:	Vector number (ignored for C)
- * @func:	Function name of the entry point
- *
- * Used for xennmi and xendebug redirections. No DEFINE as this is all ASM
- * indirection magic.
- */
-#define DECLARE_IDTENTRY_XEN(vector, func)				\
-	asmlinkage void xen_asm_exc_xen##func(void);			\
-	asmlinkage void asm_exc_xen##func(void)
+#endif
 
 #else /* !__ASSEMBLY__ */
 
@@ -455,9 +437,6 @@ __visible noinstr void func(struct pt_regs *regs,			\
 # define DECLARE_IDTENTRY_MCE(vector, func)				\
 	DECLARE_IDTENTRY(vector, func)
 
-# define DECLARE_IDTENTRY_DEBUG(vector, func)				\
-	DECLARE_IDTENTRY(vector, func)
-
 /* No ASM emitted for DF as this goes through a C shim */
 # define DECLARE_IDTENTRY_DF(vector, func)
 
@@ -469,10 +448,6 @@ __visible noinstr void func(struct pt_regs *regs,			\
 /* No ASM code emitted for NMI */
 #define DECLARE_IDTENTRY_NMI(vector, func)
 
-/* XEN NMI and DB wrapper */
-#define DECLARE_IDTENTRY_XEN(vector, func)				\
-	idtentry vector asm_exc_xen##func exc_##func has_error_code=0
-
 /*
  * ASM code to emit the common vector entry stubs where each stub is
  * packed into 8 bytes.
@@ -490,16 +465,15 @@ __visible noinstr void func(struct pt_regs *regs,			\
 	.align 8
 SYM_CODE_START(irq_entries_start)
     vector=FIRST_EXTERNAL_VECTOR
-    pos = .
     .rept (FIRST_SYSTEM_VECTOR - FIRST_EXTERNAL_VECTOR)
 	UNWIND_HINT_IRET_REGS
+0 :
 	.byte	0x6a, vector
 	jmp	asm_common_interrupt
 	nop
 	/* Ensure that the above is 8 bytes max */
-	. = pos + 8
-    pos=pos+8
-    vector=vector+1
+	. = 0b + 8
+	vector = vector+1
     .endr
 SYM_CODE_END(irq_entries_start)
 
@@ -507,16 +481,15 @@ SYM_CODE_END(irq_entries_start)
 	.align 8
 SYM_CODE_START(spurious_entries_start)
     vector=FIRST_SYSTEM_VECTOR
-    pos = .
     .rept (NR_VECTORS - FIRST_SYSTEM_VECTOR)
 	UNWIND_HINT_IRET_REGS
+0 :
 	.byte	0x6a, vector
 	jmp	asm_spurious_interrupt
 	nop
 	/* Ensure that the above is 8 bytes max */
-	. = pos + 8
-    pos=pos+8
-    vector=vector+1
+	. = 0b + 8
+	vector = vector+1
     .endr
 SYM_CODE_END(spurious_entries_start)
 #endif
@@ -565,16 +538,28 @@ DECLARE_IDTENTRY_RAW(X86_TRAP_BP,		exc_int3);
 DECLARE_IDTENTRY_RAW_ERRORCODE(X86_TRAP_PF,	exc_page_fault);
 
 #ifdef CONFIG_X86_MCE
+#ifdef CONFIG_X86_64
 DECLARE_IDTENTRY_MCE(X86_TRAP_MC,	exc_machine_check);
+#else
+DECLARE_IDTENTRY_RAW(X86_TRAP_MC,	exc_machine_check);
+#endif
 #endif
 
 /* NMI */
 DECLARE_IDTENTRY_NMI(X86_TRAP_NMI,	exc_nmi);
-DECLARE_IDTENTRY_XEN(X86_TRAP_NMI,	nmi);
+#if defined(CONFIG_XEN_PV) && defined(CONFIG_X86_64)
+DECLARE_IDTENTRY_RAW(X86_TRAP_NMI,	xenpv_exc_nmi);
+#endif
 
 /* #DB */
+#ifdef CONFIG_X86_64
 DECLARE_IDTENTRY_DEBUG(X86_TRAP_DB,	exc_debug);
-DECLARE_IDTENTRY_XEN(X86_TRAP_DB,	debug);
+#else
+DECLARE_IDTENTRY_RAW(X86_TRAP_DB,	exc_debug);
+#endif
+#if defined(CONFIG_XEN_PV) && defined(CONFIG_X86_64)
+DECLARE_IDTENTRY_RAW(X86_TRAP_DB,	xenpv_exc_debug);
+#endif
 
 /* #DF */
 DECLARE_IDTENTRY_DF(X86_TRAP_DF,	exc_double_fault);
@@ -635,8 +620,8 @@ DECLARE_IDTENTRY_SYSVEC(POSTED_INTR_NESTED_VECTOR,	sysvec_kvm_posted_intr_nested
 
 #if IS_ENABLED(CONFIG_HYPERV)
 DECLARE_IDTENTRY_SYSVEC(HYPERVISOR_CALLBACK_VECTOR,	sysvec_hyperv_callback);
-DECLARE_IDTENTRY_SYSVEC(HYPERVISOR_REENLIGHTENMENT_VECTOR,	sysvec_hyperv_reenlightenment);
-DECLARE_IDTENTRY_SYSVEC(HYPERVISOR_STIMER0_VECTOR,	sysvec_hyperv_stimer0);
+DECLARE_IDTENTRY_SYSVEC(HYPERV_REENLIGHTENMENT_VECTOR,	sysvec_hyperv_reenlightenment);
+DECLARE_IDTENTRY_SYSVEC(HYPERV_STIMER0_VECTOR,	sysvec_hyperv_stimer0);
 #endif
 
 #if IS_ENABLED(CONFIG_ACRN_GUEST)
diff --git a/arch/x86/include/asm/inst.h b/arch/x86/include/asm/inst.h
index f5a796da07f8..bd7f02480ca1 100644
--- a/arch/x86/include/asm/inst.h
+++ b/arch/x86/include/asm/inst.h
@@ -12,7 +12,6 @@
 
 #define REG_TYPE_R32		0
 #define REG_TYPE_R64		1
-#define REG_TYPE_XMM		2
 #define REG_TYPE_INVALID	100
 
 	.macro R32_NUM opd r32
@@ -123,77 +122,18 @@
 #endif
 	.endm
 
-	.macro XMM_NUM opd xmm
-	\opd = REG_NUM_INVALID
-	.ifc \xmm,%xmm0
-	\opd = 0
-	.endif
-	.ifc \xmm,%xmm1
-	\opd = 1
-	.endif
-	.ifc \xmm,%xmm2
-	\opd = 2
-	.endif
-	.ifc \xmm,%xmm3
-	\opd = 3
-	.endif
-	.ifc \xmm,%xmm4
-	\opd = 4
-	.endif
-	.ifc \xmm,%xmm5
-	\opd = 5
-	.endif
-	.ifc \xmm,%xmm6
-	\opd = 6
-	.endif
-	.ifc \xmm,%xmm7
-	\opd = 7
-	.endif
-	.ifc \xmm,%xmm8
-	\opd = 8
-	.endif
-	.ifc \xmm,%xmm9
-	\opd = 9
-	.endif
-	.ifc \xmm,%xmm10
-	\opd = 10
-	.endif
-	.ifc \xmm,%xmm11
-	\opd = 11
-	.endif
-	.ifc \xmm,%xmm12
-	\opd = 12
-	.endif
-	.ifc \xmm,%xmm13
-	\opd = 13
-	.endif
-	.ifc \xmm,%xmm14
-	\opd = 14
-	.endif
-	.ifc \xmm,%xmm15
-	\opd = 15
-	.endif
-	.endm
-
 	.macro REG_TYPE type reg
 	R32_NUM reg_type_r32 \reg
 	R64_NUM reg_type_r64 \reg
-	XMM_NUM reg_type_xmm \reg
 	.if reg_type_r64 <> REG_NUM_INVALID
 	\type = REG_TYPE_R64
 	.elseif reg_type_r32 <> REG_NUM_INVALID
 	\type = REG_TYPE_R32
-	.elseif reg_type_xmm <> REG_NUM_INVALID
-	\type = REG_TYPE_XMM
 	.else
 	\type = REG_TYPE_INVALID
 	.endif
 	.endm
 
-	.macro PFX_OPD_SIZE
-	.byte 0x66
-	.endm
-
 	.macro PFX_REX opd1 opd2 W=0
 	.if ((\opd1 | \opd2) & 8) || \W
 	.byte 0x40 | ((\opd1 & 8) >> 3) | ((\opd2 & 8) >> 1) | (\W << 3)
@@ -204,108 +144,20 @@
 	.byte \mod | (\opd1 & 7) | ((\opd2 & 7) << 3)
 	.endm
 
-	.macro PSHUFB_XMM xmm1 xmm2
-	XMM_NUM pshufb_opd1 \xmm1
-	XMM_NUM pshufb_opd2 \xmm2
-	PFX_OPD_SIZE
-	PFX_REX pshufb_opd1 pshufb_opd2
-	.byte 0x0f, 0x38, 0x00
-	MODRM 0xc0 pshufb_opd1 pshufb_opd2
-	.endm
-
-	.macro PCLMULQDQ imm8 xmm1 xmm2
-	XMM_NUM clmul_opd1 \xmm1
-	XMM_NUM clmul_opd2 \xmm2
-	PFX_OPD_SIZE
-	PFX_REX clmul_opd1 clmul_opd2
-	.byte 0x0f, 0x3a, 0x44
-	MODRM 0xc0 clmul_opd1 clmul_opd2
-	.byte \imm8
-	.endm
-
-	.macro PEXTRD imm8 xmm gpr
-	R32_NUM extrd_opd1 \gpr
-	XMM_NUM extrd_opd2 \xmm
-	PFX_OPD_SIZE
-	PFX_REX extrd_opd1 extrd_opd2
-	.byte 0x0f, 0x3a, 0x16
-	MODRM 0xc0 extrd_opd1 extrd_opd2
-	.byte \imm8
-	.endm
-
-	.macro AESKEYGENASSIST rcon xmm1 xmm2
-	XMM_NUM aeskeygen_opd1 \xmm1
-	XMM_NUM aeskeygen_opd2 \xmm2
-	PFX_OPD_SIZE
-	PFX_REX aeskeygen_opd1 aeskeygen_opd2
-	.byte 0x0f, 0x3a, 0xdf
-	MODRM 0xc0 aeskeygen_opd1 aeskeygen_opd2
-	.byte \rcon
-	.endm
-
-	.macro AESIMC xmm1 xmm2
-	XMM_NUM aesimc_opd1 \xmm1
-	XMM_NUM aesimc_opd2 \xmm2
-	PFX_OPD_SIZE
-	PFX_REX aesimc_opd1 aesimc_opd2
-	.byte 0x0f, 0x38, 0xdb
-	MODRM 0xc0 aesimc_opd1 aesimc_opd2
-	.endm
-
-	.macro AESENC xmm1 xmm2
-	XMM_NUM aesenc_opd1 \xmm1
-	XMM_NUM aesenc_opd2 \xmm2
-	PFX_OPD_SIZE
-	PFX_REX aesenc_opd1 aesenc_opd2
-	.byte 0x0f, 0x38, 0xdc
-	MODRM 0xc0 aesenc_opd1 aesenc_opd2
-	.endm
-
-	.macro AESENCLAST xmm1 xmm2
-	XMM_NUM aesenclast_opd1 \xmm1
-	XMM_NUM aesenclast_opd2 \xmm2
-	PFX_OPD_SIZE
-	PFX_REX aesenclast_opd1 aesenclast_opd2
-	.byte 0x0f, 0x38, 0xdd
-	MODRM 0xc0 aesenclast_opd1 aesenclast_opd2
-	.endm
-
-	.macro AESDEC xmm1 xmm2
-	XMM_NUM aesdec_opd1 \xmm1
-	XMM_NUM aesdec_opd2 \xmm2
-	PFX_OPD_SIZE
-	PFX_REX aesdec_opd1 aesdec_opd2
-	.byte 0x0f, 0x38, 0xde
-	MODRM 0xc0 aesdec_opd1 aesdec_opd2
-	.endm
-
-	.macro AESDECLAST xmm1 xmm2
-	XMM_NUM aesdeclast_opd1 \xmm1
-	XMM_NUM aesdeclast_opd2 \xmm2
-	PFX_OPD_SIZE
-	PFX_REX aesdeclast_opd1 aesdeclast_opd2
-	.byte 0x0f, 0x38, 0xdf
-	MODRM 0xc0 aesdeclast_opd1 aesdeclast_opd2
-	.endm
-
-	.macro MOVQ_R64_XMM opd1 opd2
-	REG_TYPE movq_r64_xmm_opd1_type \opd1
-	.if movq_r64_xmm_opd1_type == REG_TYPE_XMM
-	XMM_NUM movq_r64_xmm_opd1 \opd1
-	R64_NUM movq_r64_xmm_opd2 \opd2
+.macro RDPID opd
+	REG_TYPE rdpid_opd_type \opd
+	.if rdpid_opd_type == REG_TYPE_R64
+	R64_NUM rdpid_opd \opd
 	.else
-	R64_NUM movq_r64_xmm_opd1 \opd1
-	XMM_NUM movq_r64_xmm_opd2 \opd2
+	R32_NUM rdpid_opd \opd
 	.endif
-	PFX_OPD_SIZE
-	PFX_REX movq_r64_xmm_opd1 movq_r64_xmm_opd2 1
-	.if movq_r64_xmm_opd1_type == REG_TYPE_XMM
-	.byte 0x0f, 0x7e
-	.else
-	.byte 0x0f, 0x6e
+	.byte 0xf3
+	.if rdpid_opd > 7
+	PFX_REX rdpid_opd 0
 	.endif
-	MODRM 0xc0 movq_r64_xmm_opd1 movq_r64_xmm_opd2
-	.endm
+	.byte 0x0f, 0xc7
+	MODRM 0xc0 rdpid_opd 0x7
+.endm
 #endif
 
 #endif
diff --git a/arch/x86/include/asm/intel-family.h b/arch/x86/include/asm/intel-family.h
index a338a6deb950..5e658ba2654a 100644
--- a/arch/x86/include/asm/intel-family.h
+++ b/arch/x86/include/asm/intel-family.h
@@ -89,8 +89,15 @@
 #define INTEL_FAM6_COMETLAKE		0xA5
 #define INTEL_FAM6_COMETLAKE_L		0xA6
 
+#define INTEL_FAM6_ROCKETLAKE		0xA7
+
 #define INTEL_FAM6_SAPPHIRERAPIDS_X	0x8F
 
+/* Hybrid Core/Atom Processors */
+
+#define	INTEL_FAM6_LAKEFIELD		0x8A
+#define INTEL_FAM6_ALDERLAKE		0x97
+
 /* "Small Core" Processors (Atom) */
 
 #define INTEL_FAM6_ATOM_BONNELL		0x1C /* Diamondville, Pineview */
diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h
index fd20a2334885..a1a26f6d3aa4 100644
--- a/arch/x86/include/asm/io_apic.h
+++ b/arch/x86/include/asm/io_apic.h
@@ -99,7 +99,6 @@ struct IR_IO_APIC_route_entry {
 struct irq_alloc_info;
 struct ioapic_domain_cfg;
 
-#define IOAPIC_AUTO			-1
 #define IOAPIC_EDGE			0
 #define IOAPIC_LEVEL			1
 
diff --git a/arch/x86/include/asm/io_bitmap.h b/arch/x86/include/asm/io_bitmap.h
index ac1a99ffbd8d..7f080f5c7def 100644
--- a/arch/x86/include/asm/io_bitmap.h
+++ b/arch/x86/include/asm/io_bitmap.h
@@ -19,12 +19,28 @@ struct task_struct;
 void io_bitmap_share(struct task_struct *tsk);
 void io_bitmap_exit(struct task_struct *tsk);
 
+static inline void native_tss_invalidate_io_bitmap(void)
+{
+	/*
+	 * Invalidate the I/O bitmap by moving io_bitmap_base outside the
+	 * TSS limit so any subsequent I/O access from user space will
+	 * trigger a #GP.
+	 *
+	 * This is correct even when VMEXIT rewrites the TSS limit
+	 * to 0x67 as the only requirement is that the base points
+	 * outside the limit.
+	 */
+	this_cpu_write(cpu_tss_rw.x86_tss.io_bitmap_base,
+		       IO_BITMAP_OFFSET_INVALID);
+}
+
 void native_tss_update_io_bitmap(void);
 
 #ifdef CONFIG_PARAVIRT_XXL
 #include <asm/paravirt.h>
 #else
 #define tss_update_io_bitmap native_tss_update_io_bitmap
+#define tss_invalidate_io_bitmap native_tss_invalidate_io_bitmap
 #endif
 
 #else
diff --git a/arch/x86/include/asm/iosf_mbi.h b/arch/x86/include/asm/iosf_mbi.h
index 5270ff39b9af..a1911fea8739 100644
--- a/arch/x86/include/asm/iosf_mbi.h
+++ b/arch/x86/include/asm/iosf_mbi.h
@@ -39,6 +39,7 @@
 #define BT_MBI_UNIT_PMC		0x04
 #define BT_MBI_UNIT_GFX		0x06
 #define BT_MBI_UNIT_SMI		0x0C
+#define BT_MBI_UNIT_CCK		0x14
 #define BT_MBI_UNIT_USB		0x43
 #define BT_MBI_UNIT_SATA	0xA3
 #define BT_MBI_UNIT_PCIE	0xA6
diff --git a/arch/x86/include/asm/kdebug.h b/arch/x86/include/asm/kdebug.h
index 247ab14c6309..d1514e70477b 100644
--- a/arch/x86/include/asm/kdebug.h
+++ b/arch/x86/include/asm/kdebug.h
@@ -36,8 +36,9 @@ extern void die(const char *, struct pt_regs *,long);
 void die_addr(const char *str, struct pt_regs *regs, long err, long gp_addr);
 extern int __must_check __die(const char *, struct pt_regs *, long);
 extern void show_stack_regs(struct pt_regs *regs);
-extern void __show_regs(struct pt_regs *regs, enum show_regs_mode);
-extern void show_iret_regs(struct pt_regs *regs);
+extern void __show_regs(struct pt_regs *regs, enum show_regs_mode,
+			const char *log_lvl);
+extern void show_iret_regs(struct pt_regs *regs, const char *log_lvl);
 extern unsigned long oops_begin(void);
 extern void oops_end(unsigned long, struct pt_regs *, int signr);
 
diff --git a/arch/x86/include/asm/kprobes.h b/arch/x86/include/asm/kprobes.h
index 073eb7ad2f56..143bc9abe99c 100644
--- a/arch/x86/include/asm/kprobes.h
+++ b/arch/x86/include/asm/kprobes.h
@@ -66,6 +66,8 @@ struct arch_specific_insn {
 	 */
 	bool boostable;
 	bool if_modifier;
+	/* Number of bytes of text poked */
+	int tp_len;
 };
 
 struct arch_optimized_insn {
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index f8998e97457f..be5363b21540 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -943,7 +943,7 @@ struct kvm_arch {
 	atomic_t vapics_in_nmi_mode;
 	struct mutex apic_map_lock;
 	struct kvm_apic_map *apic_map;
-	bool apic_map_dirty;
+	atomic_t apic_map_dirty;
 
 	bool apic_access_page_done;
 	unsigned long apicv_inhibit_reasons;
@@ -1220,7 +1220,7 @@ struct kvm_x86_ops {
 	void (*enable_log_dirty_pt_masked)(struct kvm *kvm,
 					   struct kvm_memory_slot *slot,
 					   gfn_t offset, unsigned long mask);
-	int (*write_log_dirty)(struct kvm_vcpu *vcpu);
+	int (*write_log_dirty)(struct kvm_vcpu *vcpu, gpa_t l2_gpa);
 
 	/* pmu operations of sub-arch */
 	const struct kvm_pmu_ops *pmu_ops;
diff --git a/arch/x86/include/asm/mem_encrypt.h b/arch/x86/include/asm/mem_encrypt.h
index 848ce43b9040..5049f6c22683 100644
--- a/arch/x86/include/asm/mem_encrypt.h
+++ b/arch/x86/include/asm/mem_encrypt.h
@@ -43,9 +43,10 @@ void __init sme_enable(struct boot_params *bp);
 int __init early_set_memory_decrypted(unsigned long vaddr, unsigned long size);
 int __init early_set_memory_encrypted(unsigned long vaddr, unsigned long size);
 
+void __init mem_encrypt_free_decrypted_mem(void);
+
 /* Architecture __weak replacement functions */
 void __init mem_encrypt_init(void);
-void __init mem_encrypt_free_decrypted_mem(void);
 
 bool sme_active(void);
 bool sev_active(void);
@@ -77,6 +78,8 @@ early_set_memory_decrypted(unsigned long vaddr, unsigned long size) { return 0;
 static inline int __init
 early_set_memory_encrypted(unsigned long vaddr, unsigned long size) { return 0; }
 
+static inline void mem_encrypt_free_decrypted_mem(void) { }
+
 #define __bss_decrypted
 
 #endif	/* CONFIG_AMD_MEM_ENCRYPT */
diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
index e8370e64a155..2859ee4f39a8 100644
--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -149,6 +149,10 @@
 
 #define MSR_LBR_SELECT			0x000001c8
 #define MSR_LBR_TOS			0x000001c9
+
+#define MSR_IA32_POWER_CTL		0x000001fc
+#define MSR_IA32_POWER_CTL_BIT_EE	19
+
 #define MSR_LBR_NHM_FROM		0x00000680
 #define MSR_LBR_NHM_TO			0x000006c0
 #define MSR_LBR_CORE_FROM		0x00000040
@@ -158,7 +162,23 @@
 #define LBR_INFO_MISPRED		BIT_ULL(63)
 #define LBR_INFO_IN_TX			BIT_ULL(62)
 #define LBR_INFO_ABORT			BIT_ULL(61)
+#define LBR_INFO_CYC_CNT_VALID		BIT_ULL(60)
 #define LBR_INFO_CYCLES			0xffff
+#define LBR_INFO_BR_TYPE_OFFSET		56
+#define LBR_INFO_BR_TYPE		(0xfull << LBR_INFO_BR_TYPE_OFFSET)
+
+#define MSR_ARCH_LBR_CTL		0x000014ce
+#define ARCH_LBR_CTL_LBREN		BIT(0)
+#define ARCH_LBR_CTL_CPL_OFFSET		1
+#define ARCH_LBR_CTL_CPL		(0x3ull << ARCH_LBR_CTL_CPL_OFFSET)
+#define ARCH_LBR_CTL_STACK_OFFSET	3
+#define ARCH_LBR_CTL_STACK		(0x1ull << ARCH_LBR_CTL_STACK_OFFSET)
+#define ARCH_LBR_CTL_FILTER_OFFSET	16
+#define ARCH_LBR_CTL_FILTER		(0x7full << ARCH_LBR_CTL_FILTER_OFFSET)
+#define MSR_ARCH_LBR_DEPTH		0x000014cf
+#define MSR_ARCH_LBR_FROM_0		0x00001500
+#define MSR_ARCH_LBR_TO_0		0x00001600
+#define MSR_ARCH_LBR_INFO_0		0x00001200
 
 #define MSR_IA32_PEBS_ENABLE		0x000003f1
 #define MSR_PEBS_DATA_CFG		0x000003f2
@@ -253,8 +273,6 @@
 
 #define MSR_PEBS_FRONTEND		0x000003f7
 
-#define MSR_IA32_POWER_CTL		0x000001fc
-
 #define MSR_IA32_MC0_CTL		0x00000400
 #define MSR_IA32_MC0_STATUS		0x00000401
 #define MSR_IA32_MC0_ADDR		0x00000402
@@ -418,7 +436,6 @@
 #define MSR_AMD64_PATCH_LEVEL		0x0000008b
 #define MSR_AMD64_TSC_RATIO		0xc0000104
 #define MSR_AMD64_NB_CFG		0xc001001f
-#define MSR_AMD64_CPUID_FN_1		0xc0011004
 #define MSR_AMD64_PATCH_LOADER		0xc0010020
 #define MSR_AMD_PERF_CTL		0xc0010062
 #define MSR_AMD_PERF_STATUS		0xc0010063
@@ -427,6 +444,7 @@
 #define MSR_AMD64_OSVW_STATUS		0xc0010141
 #define MSR_AMD_PPIN_CTL		0xc00102f0
 #define MSR_AMD_PPIN			0xc00102f1
+#define MSR_AMD64_CPUID_FN_1		0xc0011004
 #define MSR_AMD64_LS_CFG		0xc0011020
 #define MSR_AMD64_DC_CFG		0xc0011022
 #define MSR_AMD64_BU_CFG2		0xc001102a
@@ -466,6 +484,8 @@
 #define MSR_F16H_DR0_ADDR_MASK		0xc0011027
 
 /* Fam 15h MSRs */
+#define MSR_F15H_CU_PWR_ACCUMULATOR     0xc001007a
+#define MSR_F15H_CU_MAX_PWR_ACCUMULATOR 0xc001007b
 #define MSR_F15H_PERF_CTL		0xc0010200
 #define MSR_F15H_PERF_CTL0		MSR_F15H_PERF_CTL
 #define MSR_F15H_PERF_CTL1		(MSR_F15H_PERF_CTL + 2)
diff --git a/arch/x86/include/asm/mwait.h b/arch/x86/include/asm/mwait.h
index 73d997aa2966..e039a933aca3 100644
--- a/arch/x86/include/asm/mwait.h
+++ b/arch/x86/include/asm/mwait.h
@@ -25,8 +25,6 @@
 #define TPAUSE_C01_STATE		1
 #define TPAUSE_C02_STATE		0
 
-u32 get_umwait_control_msr(void);
-
 static inline void __monitor(const void *eax, unsigned long ecx,
 			     unsigned long edx)
 {
diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
index 5ca5d297df75..3d2afecde50c 100644
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -302,6 +302,11 @@ static inline void write_idt_entry(gate_desc *dt, int entry, const gate_desc *g)
 }
 
 #ifdef CONFIG_X86_IOPL_IOPERM
+static inline void tss_invalidate_io_bitmap(void)
+{
+	PVOP_VCALL0(cpu.invalidate_io_bitmap);
+}
+
 static inline void tss_update_io_bitmap(void)
 {
 	PVOP_VCALL0(cpu.update_io_bitmap);
diff --git a/arch/x86/include/asm/paravirt_types.h b/arch/x86/include/asm/paravirt_types.h
index 732f62e04ddb..8dfcb2508e6d 100644
--- a/arch/x86/include/asm/paravirt_types.h
+++ b/arch/x86/include/asm/paravirt_types.h
@@ -141,6 +141,7 @@ struct pv_cpu_ops {
 	void (*load_sp0)(unsigned long sp0);
 
 #ifdef CONFIG_X86_IOPL_IOPERM
+	void (*invalidate_io_bitmap)(void);
 	void (*update_io_bitmap)(void);
 #endif
 
diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h
index 2278797c769d..a3c33b79fb86 100644
--- a/arch/x86/include/asm/percpu.h
+++ b/arch/x86/include/asm/percpu.h
@@ -4,33 +4,15 @@
 
 #ifdef CONFIG_X86_64
 #define __percpu_seg		gs
-#define __percpu_mov_op		movq
 #else
 #define __percpu_seg		fs
-#define __percpu_mov_op		movl
 #endif
 
 #ifdef __ASSEMBLY__
 
-/*
- * PER_CPU finds an address of a per-cpu variable.
- *
- * Args:
- *    var - variable name
- *    reg - 32bit register
- *
- * The resulting address is stored in the "reg" argument.
- *
- * Example:
- *    PER_CPU(cpu_gdt_descr, %ebx)
- */
 #ifdef CONFIG_SMP
-#define PER_CPU(var, reg)						\
-	__percpu_mov_op %__percpu_seg:this_cpu_off, reg;		\
-	lea var(reg), reg
 #define PER_CPU_VAR(var)	%__percpu_seg:var
 #else /* ! SMP */
-#define PER_CPU(var, reg)	__percpu_mov_op $var, reg
 #define PER_CPU_VAR(var)	var
 #endif	/* SMP */
 
@@ -85,213 +67,108 @@
 
 /* For arch-specific code, we can use direct single-insn ops (they
  * don't give an lvalue though). */
-extern void __bad_percpu_size(void);
-
-#define percpu_to_op(qual, op, var, val)		\
-do {							\
-	typedef typeof(var) pto_T__;			\
-	if (0) {					\
-		pto_T__ pto_tmp__;			\
-		pto_tmp__ = (val);			\
-		(void)pto_tmp__;			\
-	}						\
-	switch (sizeof(var)) {				\
-	case 1:						\
-		asm qual (op "b %1,"__percpu_arg(0)	\
-		    : "+m" (var)			\
-		    : "qi" ((pto_T__)(val)));		\
-		break;					\
-	case 2:						\
-		asm qual (op "w %1,"__percpu_arg(0)	\
-		    : "+m" (var)			\
-		    : "ri" ((pto_T__)(val)));		\
-		break;					\
-	case 4:						\
-		asm qual (op "l %1,"__percpu_arg(0)	\
-		    : "+m" (var)			\
-		    : "ri" ((pto_T__)(val)));		\
-		break;					\
-	case 8:						\
-		asm qual (op "q %1,"__percpu_arg(0)	\
-		    : "+m" (var)			\
-		    : "re" ((pto_T__)(val)));		\
-		break;					\
-	default: __bad_percpu_size();			\
-	}						\
+
+#define __pcpu_type_1 u8
+#define __pcpu_type_2 u16
+#define __pcpu_type_4 u32
+#define __pcpu_type_8 u64
+
+#define __pcpu_cast_1(val) ((u8)(((unsigned long) val) & 0xff))
+#define __pcpu_cast_2(val) ((u16)(((unsigned long) val) & 0xffff))
+#define __pcpu_cast_4(val) ((u32)(((unsigned long) val) & 0xffffffff))
+#define __pcpu_cast_8(val) ((u64)(val))
+
+#define __pcpu_op1_1(op, dst) op "b " dst
+#define __pcpu_op1_2(op, dst) op "w " dst
+#define __pcpu_op1_4(op, dst) op "l " dst
+#define __pcpu_op1_8(op, dst) op "q " dst
+
+#define __pcpu_op2_1(op, src, dst) op "b " src ", " dst
+#define __pcpu_op2_2(op, src, dst) op "w " src ", " dst
+#define __pcpu_op2_4(op, src, dst) op "l " src ", " dst
+#define __pcpu_op2_8(op, src, dst) op "q " src ", " dst
+
+#define __pcpu_reg_1(mod, x) mod "q" (x)
+#define __pcpu_reg_2(mod, x) mod "r" (x)
+#define __pcpu_reg_4(mod, x) mod "r" (x)
+#define __pcpu_reg_8(mod, x) mod "r" (x)
+
+#define __pcpu_reg_imm_1(x) "qi" (x)
+#define __pcpu_reg_imm_2(x) "ri" (x)
+#define __pcpu_reg_imm_4(x) "ri" (x)
+#define __pcpu_reg_imm_8(x) "re" (x)
+
+#define percpu_to_op(size, qual, op, _var, _val)			\
+do {									\
+	__pcpu_type_##size pto_val__ = __pcpu_cast_##size(_val);	\
+	if (0) {		                                        \
+		typeof(_var) pto_tmp__;					\
+		pto_tmp__ = (_val);					\
+		(void)pto_tmp__;					\
+	}								\
+	asm qual(__pcpu_op2_##size(op, "%[val]", __percpu_arg([var]))	\
+	    : [var] "+m" (_var)						\
+	    : [val] __pcpu_reg_imm_##size(pto_val__));			\
 } while (0)
 
+#define percpu_unary_op(size, qual, op, _var)				\
+({									\
+	asm qual (__pcpu_op1_##size(op, __percpu_arg([var]))		\
+	    : [var] "+m" (_var));					\
+})
+
 /*
  * Generate a percpu add to memory instruction and optimize code
  * if one is added or subtracted.
  */
-#define percpu_add_op(qual, var, val)					\
+#define percpu_add_op(size, qual, var, val)				\
 do {									\
-	typedef typeof(var) pao_T__;					\
 	const int pao_ID__ = (__builtin_constant_p(val) &&		\
 			      ((val) == 1 || (val) == -1)) ?		\
 				(int)(val) : 0;				\
 	if (0) {							\
-		pao_T__ pao_tmp__;					\
+		typeof(var) pao_tmp__;					\
 		pao_tmp__ = (val);					\
 		(void)pao_tmp__;					\
 	}								\
-	switch (sizeof(var)) {						\
-	case 1:								\
-		if (pao_ID__ == 1)					\
-			asm qual ("incb "__percpu_arg(0) : "+m" (var));	\
-		else if (pao_ID__ == -1)				\
-			asm qual ("decb "__percpu_arg(0) : "+m" (var));	\
-		else							\
-			asm qual ("addb %1, "__percpu_arg(0)		\
-			    : "+m" (var)				\
-			    : "qi" ((pao_T__)(val)));			\
-		break;							\
-	case 2:								\
-		if (pao_ID__ == 1)					\
-			asm qual ("incw "__percpu_arg(0) : "+m" (var));	\
-		else if (pao_ID__ == -1)				\
-			asm qual ("decw "__percpu_arg(0) : "+m" (var));	\
-		else							\
-			asm qual ("addw %1, "__percpu_arg(0)		\
-			    : "+m" (var)				\
-			    : "ri" ((pao_T__)(val)));			\
-		break;							\
-	case 4:								\
-		if (pao_ID__ == 1)					\
-			asm qual ("incl "__percpu_arg(0) : "+m" (var));	\
-		else if (pao_ID__ == -1)				\
-			asm qual ("decl "__percpu_arg(0) : "+m" (var));	\
-		else							\
-			asm qual ("addl %1, "__percpu_arg(0)		\
-			    : "+m" (var)				\
-			    : "ri" ((pao_T__)(val)));			\
-		break;							\
-	case 8:								\
-		if (pao_ID__ == 1)					\
-			asm qual ("incq "__percpu_arg(0) : "+m" (var));	\
-		else if (pao_ID__ == -1)				\
-			asm qual ("decq "__percpu_arg(0) : "+m" (var));	\
-		else							\
-			asm qual ("addq %1, "__percpu_arg(0)		\
-			    : "+m" (var)				\
-			    : "re" ((pao_T__)(val)));			\
-		break;							\
-	default: __bad_percpu_size();					\
-	}								\
+	if (pao_ID__ == 1)						\
+		percpu_unary_op(size, qual, "inc", var);		\
+	else if (pao_ID__ == -1)					\
+		percpu_unary_op(size, qual, "dec", var);		\
+	else								\
+		percpu_to_op(size, qual, "add", var, val);		\
 } while (0)
 
-#define percpu_from_op(qual, op, var)			\
-({							\
-	typeof(var) pfo_ret__;				\
-	switch (sizeof(var)) {				\
-	case 1:						\
-		asm qual (op "b "__percpu_arg(1)",%0"	\
-		    : "=q" (pfo_ret__)			\
-		    : "m" (var));			\
-		break;					\
-	case 2:						\
-		asm qual (op "w "__percpu_arg(1)",%0"	\
-		    : "=r" (pfo_ret__)			\
-		    : "m" (var));			\
-		break;					\
-	case 4:						\
-		asm qual (op "l "__percpu_arg(1)",%0"	\
-		    : "=r" (pfo_ret__)			\
-		    : "m" (var));			\
-		break;					\
-	case 8:						\
-		asm qual (op "q "__percpu_arg(1)",%0"	\
-		    : "=r" (pfo_ret__)			\
-		    : "m" (var));			\
-		break;					\
-	default: __bad_percpu_size();			\
-	}						\
-	pfo_ret__;					\
-})
-
-#define percpu_stable_op(op, var)			\
-({							\
-	typeof(var) pfo_ret__;				\
-	switch (sizeof(var)) {				\
-	case 1:						\
-		asm(op "b "__percpu_arg(P1)",%0"	\
-		    : "=q" (pfo_ret__)			\
-		    : "p" (&(var)));			\
-		break;					\
-	case 2:						\
-		asm(op "w "__percpu_arg(P1)",%0"	\
-		    : "=r" (pfo_ret__)			\
-		    : "p" (&(var)));			\
-		break;					\
-	case 4:						\
-		asm(op "l "__percpu_arg(P1)",%0"	\
-		    : "=r" (pfo_ret__)			\
-		    : "p" (&(var)));			\
-		break;					\
-	case 8:						\
-		asm(op "q "__percpu_arg(P1)",%0"	\
-		    : "=r" (pfo_ret__)			\
-		    : "p" (&(var)));			\
-		break;					\
-	default: __bad_percpu_size();			\
-	}						\
-	pfo_ret__;					\
+#define percpu_from_op(size, qual, op, _var)				\
+({									\
+	__pcpu_type_##size pfo_val__;					\
+	asm qual (__pcpu_op2_##size(op, __percpu_arg([var]), "%[val]")	\
+	    : [val] __pcpu_reg_##size("=", pfo_val__)			\
+	    : [var] "m" (_var));					\
+	(typeof(_var))(unsigned long) pfo_val__;			\
 })
 
-#define percpu_unary_op(qual, op, var)			\
-({							\
-	switch (sizeof(var)) {				\
-	case 1:						\
-		asm qual (op "b "__percpu_arg(0)	\
-		    : "+m" (var));			\
-		break;					\
-	case 2:						\
-		asm qual (op "w "__percpu_arg(0)	\
-		    : "+m" (var));			\
-		break;					\
-	case 4:						\
-		asm qual (op "l "__percpu_arg(0)	\
-		    : "+m" (var));			\
-		break;					\
-	case 8:						\
-		asm qual (op "q "__percpu_arg(0)	\
-		    : "+m" (var));			\
-		break;					\
-	default: __bad_percpu_size();			\
-	}						\
+#define percpu_stable_op(size, op, _var)				\
+({									\
+	__pcpu_type_##size pfo_val__;					\
+	asm(__pcpu_op2_##size(op, __percpu_arg(P[var]), "%[val]")	\
+	    : [val] __pcpu_reg_##size("=", pfo_val__)			\
+	    : [var] "p" (&(_var)));					\
+	(typeof(_var))(unsigned long) pfo_val__;			\
 })
 
 /*
  * Add return operation
  */
-#define percpu_add_return_op(qual, var, val)				\
+#define percpu_add_return_op(size, qual, _var, _val)			\
 ({									\
-	typeof(var) paro_ret__ = val;					\
-	switch (sizeof(var)) {						\
-	case 1:								\
-		asm qual ("xaddb %0, "__percpu_arg(1)			\
-			    : "+q" (paro_ret__), "+m" (var)		\
-			    : : "memory");				\
-		break;							\
-	case 2:								\
-		asm qual ("xaddw %0, "__percpu_arg(1)			\
-			    : "+r" (paro_ret__), "+m" (var)		\
-			    : : "memory");				\
-		break;							\
-	case 4:								\
-		asm qual ("xaddl %0, "__percpu_arg(1)			\
-			    : "+r" (paro_ret__), "+m" (var)		\
-			    : : "memory");				\
-		break;							\
-	case 8:								\
-		asm qual ("xaddq %0, "__percpu_arg(1)			\
-			    : "+re" (paro_ret__), "+m" (var)		\
-			    : : "memory");				\
-		break;							\
-	default: __bad_percpu_size();					\
-	}								\
-	paro_ret__ += val;						\
-	paro_ret__;							\
+	__pcpu_type_##size paro_tmp__ = __pcpu_cast_##size(_val);	\
+	asm qual (__pcpu_op2_##size("xadd", "%[tmp]",			\
+				     __percpu_arg([var]))		\
+		  : [tmp] __pcpu_reg_##size("+", paro_tmp__),		\
+		    [var] "+m" (_var)					\
+		  : : "memory");					\
+	(typeof(_var))(unsigned long) (paro_tmp__ + _val);		\
 })
 
 /*
@@ -299,85 +176,38 @@ do {									\
  * expensive due to the implied lock prefix.  The processor cannot prefetch
  * cachelines if xchg is used.
  */
-#define percpu_xchg_op(qual, var, nval)					\
+#define percpu_xchg_op(size, qual, _var, _nval)				\
 ({									\
-	typeof(var) pxo_ret__;						\
-	typeof(var) pxo_new__ = (nval);					\
-	switch (sizeof(var)) {						\
-	case 1:								\
-		asm qual ("\n\tmov "__percpu_arg(1)",%%al"		\
-		    "\n1:\tcmpxchgb %2, "__percpu_arg(1)		\
-		    "\n\tjnz 1b"					\
-			    : "=&a" (pxo_ret__), "+m" (var)		\
-			    : "q" (pxo_new__)				\
-			    : "memory");				\
-		break;							\
-	case 2:								\
-		asm qual ("\n\tmov "__percpu_arg(1)",%%ax"		\
-		    "\n1:\tcmpxchgw %2, "__percpu_arg(1)		\
-		    "\n\tjnz 1b"					\
-			    : "=&a" (pxo_ret__), "+m" (var)		\
-			    : "r" (pxo_new__)				\
-			    : "memory");				\
-		break;							\
-	case 4:								\
-		asm qual ("\n\tmov "__percpu_arg(1)",%%eax"		\
-		    "\n1:\tcmpxchgl %2, "__percpu_arg(1)		\
-		    "\n\tjnz 1b"					\
-			    : "=&a" (pxo_ret__), "+m" (var)		\
-			    : "r" (pxo_new__)				\
-			    : "memory");				\
-		break;							\
-	case 8:								\
-		asm qual ("\n\tmov "__percpu_arg(1)",%%rax"		\
-		    "\n1:\tcmpxchgq %2, "__percpu_arg(1)		\
-		    "\n\tjnz 1b"					\
-			    : "=&a" (pxo_ret__), "+m" (var)		\
-			    : "r" (pxo_new__)				\
-			    : "memory");				\
-		break;							\
-	default: __bad_percpu_size();					\
-	}								\
-	pxo_ret__;							\
+	__pcpu_type_##size pxo_old__;					\
+	__pcpu_type_##size pxo_new__ = __pcpu_cast_##size(_nval);	\
+	asm qual (__pcpu_op2_##size("mov", __percpu_arg([var]),		\
+				    "%[oval]")				\
+		  "\n1:\t"						\
+		  __pcpu_op2_##size("cmpxchg", "%[nval]",		\
+				    __percpu_arg([var]))		\
+		  "\n\tjnz 1b"						\
+		  : [oval] "=&a" (pxo_old__),				\
+		    [var] "+m" (_var)					\
+		  : [nval] __pcpu_reg_##size(, pxo_new__)		\
+		  : "memory");						\
+	(typeof(_var))(unsigned long) pxo_old__;			\
 })
 
 /*
  * cmpxchg has no such implied lock semantics as a result it is much
  * more efficient for cpu local operations.
  */
-#define percpu_cmpxchg_op(qual, var, oval, nval)			\
+#define percpu_cmpxchg_op(size, qual, _var, _oval, _nval)		\
 ({									\
-	typeof(var) pco_ret__;						\
-	typeof(var) pco_old__ = (oval);					\
-	typeof(var) pco_new__ = (nval);					\
-	switch (sizeof(var)) {						\
-	case 1:								\
-		asm qual ("cmpxchgb %2, "__percpu_arg(1)		\
-			    : "=a" (pco_ret__), "+m" (var)		\
-			    : "q" (pco_new__), "0" (pco_old__)		\
-			    : "memory");				\
-		break;							\
-	case 2:								\
-		asm qual ("cmpxchgw %2, "__percpu_arg(1)		\
-			    : "=a" (pco_ret__), "+m" (var)		\
-			    : "r" (pco_new__), "0" (pco_old__)		\
-			    : "memory");				\
-		break;							\
-	case 4:								\
-		asm qual ("cmpxchgl %2, "__percpu_arg(1)		\
-			    : "=a" (pco_ret__), "+m" (var)		\
-			    : "r" (pco_new__), "0" (pco_old__)		\
-			    : "memory");				\
-		break;							\
-	case 8:								\
-		asm qual ("cmpxchgq %2, "__percpu_arg(1)		\
-			    : "=a" (pco_ret__), "+m" (var)		\
-			    : "r" (pco_new__), "0" (pco_old__)		\
-			    : "memory");				\
-		break;							\
-	default: __bad_percpu_size();					\
-	}								\
-	pco_ret__;							\
+	__pcpu_type_##size pco_old__ = __pcpu_cast_##size(_oval);	\
+	__pcpu_type_##size pco_new__ = __pcpu_cast_##size(_nval);	\
+	asm qual (__pcpu_op2_##size("cmpxchg", "%[nval]",		\
+				    __percpu_arg([var]))		\
+		  : [oval] "+a" (pco_old__),				\
+		    [var] "+m" (_var)					\
+		  : [nval] __pcpu_reg_##size(, pco_new__)		\
+		  : "memory");						\
+	(typeof(_var))(unsigned long) pco_old__;			\
 })
 
 /*
@@ -389,24 +219,28 @@ do {									\
  * per-thread variables implemented as per-cpu variables and thus
  * stable for the duration of the respective task.
  */
-#define this_cpu_read_stable(var)	percpu_stable_op("mov", var)
-
-#define raw_cpu_read_1(pcp)		percpu_from_op(, "mov", pcp)
-#define raw_cpu_read_2(pcp)		percpu_from_op(, "mov", pcp)
-#define raw_cpu_read_4(pcp)		percpu_from_op(, "mov", pcp)
-
-#define raw_cpu_write_1(pcp, val)	percpu_to_op(, "mov", (pcp), val)
-#define raw_cpu_write_2(pcp, val)	percpu_to_op(, "mov", (pcp), val)
-#define raw_cpu_write_4(pcp, val)	percpu_to_op(, "mov", (pcp), val)
-#define raw_cpu_add_1(pcp, val)		percpu_add_op(, (pcp), val)
-#define raw_cpu_add_2(pcp, val)		percpu_add_op(, (pcp), val)
-#define raw_cpu_add_4(pcp, val)		percpu_add_op(, (pcp), val)
-#define raw_cpu_and_1(pcp, val)		percpu_to_op(, "and", (pcp), val)
-#define raw_cpu_and_2(pcp, val)		percpu_to_op(, "and", (pcp), val)
-#define raw_cpu_and_4(pcp, val)		percpu_to_op(, "and", (pcp), val)
-#define raw_cpu_or_1(pcp, val)		percpu_to_op(, "or", (pcp), val)
-#define raw_cpu_or_2(pcp, val)		percpu_to_op(, "or", (pcp), val)
-#define raw_cpu_or_4(pcp, val)		percpu_to_op(, "or", (pcp), val)
+#define this_cpu_read_stable_1(pcp)	percpu_stable_op(1, "mov", pcp)
+#define this_cpu_read_stable_2(pcp)	percpu_stable_op(2, "mov", pcp)
+#define this_cpu_read_stable_4(pcp)	percpu_stable_op(4, "mov", pcp)
+#define this_cpu_read_stable_8(pcp)	percpu_stable_op(8, "mov", pcp)
+#define this_cpu_read_stable(pcp)	__pcpu_size_call_return(this_cpu_read_stable_, pcp)
+
+#define raw_cpu_read_1(pcp)		percpu_from_op(1, , "mov", pcp)
+#define raw_cpu_read_2(pcp)		percpu_from_op(2, , "mov", pcp)
+#define raw_cpu_read_4(pcp)		percpu_from_op(4, , "mov", pcp)
+
+#define raw_cpu_write_1(pcp, val)	percpu_to_op(1, , "mov", (pcp), val)
+#define raw_cpu_write_2(pcp, val)	percpu_to_op(2, , "mov", (pcp), val)
+#define raw_cpu_write_4(pcp, val)	percpu_to_op(4, , "mov", (pcp), val)
+#define raw_cpu_add_1(pcp, val)		percpu_add_op(1, , (pcp), val)
+#define raw_cpu_add_2(pcp, val)		percpu_add_op(2, , (pcp), val)
+#define raw_cpu_add_4(pcp, val)		percpu_add_op(4, , (pcp), val)
+#define raw_cpu_and_1(pcp, val)		percpu_to_op(1, , "and", (pcp), val)
+#define raw_cpu_and_2(pcp, val)		percpu_to_op(2, , "and", (pcp), val)
+#define raw_cpu_and_4(pcp, val)		percpu_to_op(4, , "and", (pcp), val)
+#define raw_cpu_or_1(pcp, val)		percpu_to_op(1, , "or", (pcp), val)
+#define raw_cpu_or_2(pcp, val)		percpu_to_op(2, , "or", (pcp), val)
+#define raw_cpu_or_4(pcp, val)		percpu_to_op(4, , "or", (pcp), val)
 
 /*
  * raw_cpu_xchg() can use a load-store since it is not required to be
@@ -423,38 +257,38 @@ do {									\
 #define raw_cpu_xchg_2(pcp, val)	raw_percpu_xchg_op(pcp, val)
 #define raw_cpu_xchg_4(pcp, val)	raw_percpu_xchg_op(pcp, val)
 
-#define this_cpu_read_1(pcp)		percpu_from_op(volatile, "mov", pcp)
-#define this_cpu_read_2(pcp)		percpu_from_op(volatile, "mov", pcp)
-#define this_cpu_read_4(pcp)		percpu_from_op(volatile, "mov", pcp)
-#define this_cpu_write_1(pcp, val)	percpu_to_op(volatile, "mov", (pcp), val)
-#define this_cpu_write_2(pcp, val)	percpu_to_op(volatile, "mov", (pcp), val)
-#define this_cpu_write_4(pcp, val)	percpu_to_op(volatile, "mov", (pcp), val)
-#define this_cpu_add_1(pcp, val)	percpu_add_op(volatile, (pcp), val)
-#define this_cpu_add_2(pcp, val)	percpu_add_op(volatile, (pcp), val)
-#define this_cpu_add_4(pcp, val)	percpu_add_op(volatile, (pcp), val)
-#define this_cpu_and_1(pcp, val)	percpu_to_op(volatile, "and", (pcp), val)
-#define this_cpu_and_2(pcp, val)	percpu_to_op(volatile, "and", (pcp), val)
-#define this_cpu_and_4(pcp, val)	percpu_to_op(volatile, "and", (pcp), val)
-#define this_cpu_or_1(pcp, val)		percpu_to_op(volatile, "or", (pcp), val)
-#define this_cpu_or_2(pcp, val)		percpu_to_op(volatile, "or", (pcp), val)
-#define this_cpu_or_4(pcp, val)		percpu_to_op(volatile, "or", (pcp), val)
-#define this_cpu_xchg_1(pcp, nval)	percpu_xchg_op(volatile, pcp, nval)
-#define this_cpu_xchg_2(pcp, nval)	percpu_xchg_op(volatile, pcp, nval)
-#define this_cpu_xchg_4(pcp, nval)	percpu_xchg_op(volatile, pcp, nval)
-
-#define raw_cpu_add_return_1(pcp, val)		percpu_add_return_op(, pcp, val)
-#define raw_cpu_add_return_2(pcp, val)		percpu_add_return_op(, pcp, val)
-#define raw_cpu_add_return_4(pcp, val)		percpu_add_return_op(, pcp, val)
-#define raw_cpu_cmpxchg_1(pcp, oval, nval)	percpu_cmpxchg_op(, pcp, oval, nval)
-#define raw_cpu_cmpxchg_2(pcp, oval, nval)	percpu_cmpxchg_op(, pcp, oval, nval)
-#define raw_cpu_cmpxchg_4(pcp, oval, nval)	percpu_cmpxchg_op(, pcp, oval, nval)
-
-#define this_cpu_add_return_1(pcp, val)		percpu_add_return_op(volatile, pcp, val)
-#define this_cpu_add_return_2(pcp, val)		percpu_add_return_op(volatile, pcp, val)
-#define this_cpu_add_return_4(pcp, val)		percpu_add_return_op(volatile, pcp, val)
-#define this_cpu_cmpxchg_1(pcp, oval, nval)	percpu_cmpxchg_op(volatile, pcp, oval, nval)
-#define this_cpu_cmpxchg_2(pcp, oval, nval)	percpu_cmpxchg_op(volatile, pcp, oval, nval)
-#define this_cpu_cmpxchg_4(pcp, oval, nval)	percpu_cmpxchg_op(volatile, pcp, oval, nval)
+#define this_cpu_read_1(pcp)		percpu_from_op(1, volatile, "mov", pcp)
+#define this_cpu_read_2(pcp)		percpu_from_op(2, volatile, "mov", pcp)
+#define this_cpu_read_4(pcp)		percpu_from_op(4, volatile, "mov", pcp)
+#define this_cpu_write_1(pcp, val)	percpu_to_op(1, volatile, "mov", (pcp), val)
+#define this_cpu_write_2(pcp, val)	percpu_to_op(2, volatile, "mov", (pcp), val)
+#define this_cpu_write_4(pcp, val)	percpu_to_op(4, volatile, "mov", (pcp), val)
+#define this_cpu_add_1(pcp, val)	percpu_add_op(1, volatile, (pcp), val)
+#define this_cpu_add_2(pcp, val)	percpu_add_op(2, volatile, (pcp), val)
+#define this_cpu_add_4(pcp, val)	percpu_add_op(4, volatile, (pcp), val)
+#define this_cpu_and_1(pcp, val)	percpu_to_op(1, volatile, "and", (pcp), val)
+#define this_cpu_and_2(pcp, val)	percpu_to_op(2, volatile, "and", (pcp), val)
+#define this_cpu_and_4(pcp, val)	percpu_to_op(4, volatile, "and", (pcp), val)
+#define this_cpu_or_1(pcp, val)		percpu_to_op(1, volatile, "or", (pcp), val)
+#define this_cpu_or_2(pcp, val)		percpu_to_op(2, volatile, "or", (pcp), val)
+#define this_cpu_or_4(pcp, val)		percpu_to_op(4, volatile, "or", (pcp), val)
+#define this_cpu_xchg_1(pcp, nval)	percpu_xchg_op(1, volatile, pcp, nval)
+#define this_cpu_xchg_2(pcp, nval)	percpu_xchg_op(2, volatile, pcp, nval)
+#define this_cpu_xchg_4(pcp, nval)	percpu_xchg_op(4, volatile, pcp, nval)
+
+#define raw_cpu_add_return_1(pcp, val)		percpu_add_return_op(1, , pcp, val)
+#define raw_cpu_add_return_2(pcp, val)		percpu_add_return_op(2, , pcp, val)
+#define raw_cpu_add_return_4(pcp, val)		percpu_add_return_op(4, , pcp, val)
+#define raw_cpu_cmpxchg_1(pcp, oval, nval)	percpu_cmpxchg_op(1, , pcp, oval, nval)
+#define raw_cpu_cmpxchg_2(pcp, oval, nval)	percpu_cmpxchg_op(2, , pcp, oval, nval)
+#define raw_cpu_cmpxchg_4(pcp, oval, nval)	percpu_cmpxchg_op(4, , pcp, oval, nval)
+
+#define this_cpu_add_return_1(pcp, val)		percpu_add_return_op(1, volatile, pcp, val)
+#define this_cpu_add_return_2(pcp, val)		percpu_add_return_op(2, volatile, pcp, val)
+#define this_cpu_add_return_4(pcp, val)		percpu_add_return_op(4, volatile, pcp, val)
+#define this_cpu_cmpxchg_1(pcp, oval, nval)	percpu_cmpxchg_op(1, volatile, pcp, oval, nval)
+#define this_cpu_cmpxchg_2(pcp, oval, nval)	percpu_cmpxchg_op(2, volatile, pcp, oval, nval)
+#define this_cpu_cmpxchg_4(pcp, oval, nval)	percpu_cmpxchg_op(4, volatile, pcp, oval, nval)
 
 #ifdef CONFIG_X86_CMPXCHG64
 #define percpu_cmpxchg8b_double(pcp1, pcp2, o1, o2, n1, n2)		\
@@ -478,23 +312,23 @@ do {									\
  * 32 bit must fall back to generic operations.
  */
 #ifdef CONFIG_X86_64
-#define raw_cpu_read_8(pcp)			percpu_from_op(, "mov", pcp)
-#define raw_cpu_write_8(pcp, val)		percpu_to_op(, "mov", (pcp), val)
-#define raw_cpu_add_8(pcp, val)			percpu_add_op(, (pcp), val)
-#define raw_cpu_and_8(pcp, val)			percpu_to_op(, "and", (pcp), val)
-#define raw_cpu_or_8(pcp, val)			percpu_to_op(, "or", (pcp), val)
-#define raw_cpu_add_return_8(pcp, val)		percpu_add_return_op(, pcp, val)
+#define raw_cpu_read_8(pcp)			percpu_from_op(8, , "mov", pcp)
+#define raw_cpu_write_8(pcp, val)		percpu_to_op(8, , "mov", (pcp), val)
+#define raw_cpu_add_8(pcp, val)			percpu_add_op(8, , (pcp), val)
+#define raw_cpu_and_8(pcp, val)			percpu_to_op(8, , "and", (pcp), val)
+#define raw_cpu_or_8(pcp, val)			percpu_to_op(8, , "or", (pcp), val)
+#define raw_cpu_add_return_8(pcp, val)		percpu_add_return_op(8, , pcp, val)
 #define raw_cpu_xchg_8(pcp, nval)		raw_percpu_xchg_op(pcp, nval)
-#define raw_cpu_cmpxchg_8(pcp, oval, nval)	percpu_cmpxchg_op(, pcp, oval, nval)
-
-#define this_cpu_read_8(pcp)			percpu_from_op(volatile, "mov", pcp)
-#define this_cpu_write_8(pcp, val)		percpu_to_op(volatile, "mov", (pcp), val)
-#define this_cpu_add_8(pcp, val)		percpu_add_op(volatile, (pcp), val)
-#define this_cpu_and_8(pcp, val)		percpu_to_op(volatile, "and", (pcp), val)
-#define this_cpu_or_8(pcp, val)			percpu_to_op(volatile, "or", (pcp), val)
-#define this_cpu_add_return_8(pcp, val)		percpu_add_return_op(volatile, pcp, val)
-#define this_cpu_xchg_8(pcp, nval)		percpu_xchg_op(volatile, pcp, nval)
-#define this_cpu_cmpxchg_8(pcp, oval, nval)	percpu_cmpxchg_op(volatile, pcp, oval, nval)
+#define raw_cpu_cmpxchg_8(pcp, oval, nval)	percpu_cmpxchg_op(8, , pcp, oval, nval)
+
+#define this_cpu_read_8(pcp)			percpu_from_op(8, volatile, "mov", pcp)
+#define this_cpu_write_8(pcp, val)		percpu_to_op(8, volatile, "mov", (pcp), val)
+#define this_cpu_add_8(pcp, val)		percpu_add_op(8, volatile, (pcp), val)
+#define this_cpu_and_8(pcp, val)		percpu_to_op(8, volatile, "and", (pcp), val)
+#define this_cpu_or_8(pcp, val)			percpu_to_op(8, volatile, "or", (pcp), val)
+#define this_cpu_add_return_8(pcp, val)		percpu_add_return_op(8, volatile, pcp, val)
+#define this_cpu_xchg_8(pcp, nval)		percpu_xchg_op(8, volatile, pcp, nval)
+#define this_cpu_cmpxchg_8(pcp, oval, nval)	percpu_cmpxchg_op(8, volatile, pcp, oval, nval)
 
 /*
  * Pretty complex macro to generate cmpxchg16 instruction.  The instruction
diff --git a/arch/x86/include/asm/perf_event.h b/arch/x86/include/asm/perf_event.h
index e855e9cf2c37..0c1b13720525 100644
--- a/arch/x86/include/asm/perf_event.h
+++ b/arch/x86/include/asm/perf_event.h
@@ -142,6 +142,46 @@ union cpuid10_edx {
 	unsigned int full;
 };
 
+/*
+ * Intel Architectural LBR CPUID detection/enumeration details:
+ */
+union cpuid28_eax {
+	struct {
+		/* Supported LBR depth values */
+		unsigned int	lbr_depth_mask:8;
+		unsigned int	reserved:22;
+		/* Deep C-state Reset */
+		unsigned int	lbr_deep_c_reset:1;
+		/* IP values contain LIP */
+		unsigned int	lbr_lip:1;
+	} split;
+	unsigned int		full;
+};
+
+union cpuid28_ebx {
+	struct {
+		/* CPL Filtering Supported */
+		unsigned int    lbr_cpl:1;
+		/* Branch Filtering Supported */
+		unsigned int    lbr_filter:1;
+		/* Call-stack Mode Supported */
+		unsigned int    lbr_call_stack:1;
+	} split;
+	unsigned int            full;
+};
+
+union cpuid28_ecx {
+	struct {
+		/* Mispredict Bit Supported */
+		unsigned int    lbr_mispred:1;
+		/* Timed LBRs Supported */
+		unsigned int    lbr_timed_lbr:1;
+		/* Branch Type Field Supported */
+		unsigned int    lbr_br_type:1;
+	} split;
+	unsigned int            full;
+};
+
 struct x86_pmu_capability {
 	int		version;
 	int		num_counters_gp;
@@ -192,10 +232,30 @@ struct x86_pmu_capability {
 #define GLOBAL_STATUS_UNC_OVF				BIT_ULL(61)
 #define GLOBAL_STATUS_ASIF				BIT_ULL(60)
 #define GLOBAL_STATUS_COUNTERS_FROZEN			BIT_ULL(59)
-#define GLOBAL_STATUS_LBRS_FROZEN			BIT_ULL(58)
+#define GLOBAL_STATUS_LBRS_FROZEN_BIT			58
+#define GLOBAL_STATUS_LBRS_FROZEN			BIT_ULL(GLOBAL_STATUS_LBRS_FROZEN_BIT)
 #define GLOBAL_STATUS_TRACE_TOPAPMI			BIT_ULL(55)
 
 /*
+ * We model guest LBR event tracing as another fixed-mode PMC like BTS.
+ *
+ * We choose bit 58 because it's used to indicate LBR stack frozen state
+ * for architectural perfmon v4, also we unconditionally mask that bit in
+ * the handle_pmi_common(), so it'll never be set in the overflow handling.
+ *
+ * With this fake counter assigned, the guest LBR event user (such as KVM),
+ * can program the LBR registers on its own, and we don't actually do anything
+ * with then in the host context.
+ */
+#define INTEL_PMC_IDX_FIXED_VLBR	(GLOBAL_STATUS_LBRS_FROZEN_BIT)
+
+/*
+ * Pseudo-encoding the guest LBR event as event=0x00,umask=0x1b,
+ * since it would claim bit 58 which is effectively Fixed26.
+ */
+#define INTEL_FIXED_VLBR_EVENT	0x1b00
+
+/*
  * Adaptive PEBS v4
  */
 
@@ -222,14 +282,6 @@ struct pebs_xmm {
 	u64 xmm[16*2];	/* two entries for each register */
 };
 
-struct pebs_lbr_entry {
-	u64 from, to, info;
-};
-
-struct pebs_lbr {
-	struct pebs_lbr_entry lbr[0]; /* Variable length */
-};
-
 /*
  * IBS cpuid feature detection
  */
@@ -333,6 +385,13 @@ struct perf_guest_switch_msr {
 	u64 host, guest;
 };
 
+struct x86_pmu_lbr {
+	unsigned int	nr;
+	unsigned int	from;
+	unsigned int	to;
+	unsigned int	info;
+};
+
 extern void perf_get_x86_pmu_capability(struct x86_pmu_capability *cap);
 extern void perf_check_microcode(void);
 extern int x86_perf_rdpmc_index(struct perf_event *event);
@@ -348,12 +407,17 @@ static inline void perf_check_microcode(void) { }
 
 #if defined(CONFIG_PERF_EVENTS) && defined(CONFIG_CPU_SUP_INTEL)
 extern struct perf_guest_switch_msr *perf_guest_get_msrs(int *nr);
+extern int x86_perf_get_lbr(struct x86_pmu_lbr *lbr);
 #else
 static inline struct perf_guest_switch_msr *perf_guest_get_msrs(int *nr)
 {
 	*nr = 0;
 	return NULL;
 }
+static inline int x86_perf_get_lbr(struct x86_pmu_lbr *lbr)
+{
+	return -1;
+}
 #endif
 
 #ifdef CONFIG_CPU_SUP_INTEL
diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 76aa21e8128d..b836138ce852 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -999,15 +999,12 @@ extern int direct_gbpages;
 void init_mem_mapping(void);
 void early_alloc_pgt_buf(void);
 extern void memblock_find_dma_reserve(void);
-
-
-#ifdef CONFIG_X86_64
-extern pgd_t trampoline_pgd_entry;
-
 void __init poking_init(void);
-
 unsigned long init_memory_mapping(unsigned long start,
 				  unsigned long end, pgprot_t prot);
+
+#ifdef CONFIG_X86_64
+extern pgd_t trampoline_pgd_entry;
 #endif
 
 /* local pte updates need not use xchg for locking */
diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h
index 1b68d24dc6a0..56d0399a0cd1 100644
--- a/arch/x86/include/asm/pgtable_64.h
+++ b/arch/x86/include/asm/pgtable_64.h
@@ -168,23 +168,18 @@ static inline void native_pgd_clear(pgd_t *pgd)
 	native_set_pgd(pgd, native_make_pgd(0));
 }
 
-extern void sync_global_pgds(unsigned long start, unsigned long end);
-
 /*
  * Conversion functions: convert a page and protection to a page entry,
  * and a page entry and page directory to the page they refer to.
  */
 
-/*
- * Level 4 access.
- */
-#define mk_kernel_pgd(address) __pgd((address) | _KERNPG_TABLE)
+/* PGD - Level 4 access */
 
-/* PUD - Level3 access */
+/* PUD - Level 3 access */
 
-/* PMD  - Level 2 access */
+/* PMD - Level 2 access */
 
-/* PTE - Level 1 access. */
+/* PTE - Level 1 access */
 
 /*
  * Encode and de-code a swap entry
diff --git a/arch/x86/include/asm/pgtable_64_types.h b/arch/x86/include/asm/pgtable_64_types.h
index 8f63efb2a2cc..52e5f5f2240d 100644
--- a/arch/x86/include/asm/pgtable_64_types.h
+++ b/arch/x86/include/asm/pgtable_64_types.h
@@ -159,6 +159,4 @@ extern unsigned int ptrs_per_p4d;
 
 #define PGD_KERNEL_START	((PAGE_SIZE / 2) / sizeof(pgd_t))
 
-#define ARCH_PAGE_TABLE_SYNC_MASK	(pgtable_l5_enabled() ?	PGTBL_PGD_MODIFIED : PGTBL_P4D_MODIFIED)
-
 #endif /* _ASM_X86_PGTABLE_64_DEFS_H */
diff --git a/arch/x86/include/asm/pgtable_types.h b/arch/x86/include/asm/pgtable_types.h
index 2da1f95b88d7..816b31c68550 100644
--- a/arch/x86/include/asm/pgtable_types.h
+++ b/arch/x86/include/asm/pgtable_types.h
@@ -194,6 +194,7 @@ enum page_cache_mode {
 #define _PAGE_TABLE_NOENC	 (__PP|__RW|_USR|___A|   0|___D|   0|   0)
 #define _PAGE_TABLE		 (__PP|__RW|_USR|___A|   0|___D|   0|   0| _ENC)
 #define __PAGE_KERNEL_RO	 (__PP|   0|   0|___A|__NX|___D|   0|___G)
+#define __PAGE_KERNEL_ROX	 (__PP|   0|   0|___A|   0|___D|   0|___G)
 #define __PAGE_KERNEL_NOCACHE	 (__PP|__RW|   0|___A|__NX|___D|   0|___G| __NC)
 #define __PAGE_KERNEL_VVAR	 (__PP|   0|_USR|___A|__NX|___D|   0|___G)
 #define __PAGE_KERNEL_LARGE	 (__PP|__RW|   0|___A|__NX|___D|_PSE|___G)
@@ -219,6 +220,7 @@ enum page_cache_mode {
 #define PAGE_KERNEL_RO		__pgprot_mask(__PAGE_KERNEL_RO         | _ENC)
 #define PAGE_KERNEL_EXEC	__pgprot_mask(__PAGE_KERNEL_EXEC       | _ENC)
 #define PAGE_KERNEL_EXEC_NOENC	__pgprot_mask(__PAGE_KERNEL_EXEC       |    0)
+#define PAGE_KERNEL_ROX		__pgprot_mask(__PAGE_KERNEL_ROX        | _ENC)
 #define PAGE_KERNEL_NOCACHE	__pgprot_mask(__PAGE_KERNEL_NOCACHE    | _ENC)
 #define PAGE_KERNEL_LARGE	__pgprot_mask(__PAGE_KERNEL_LARGE      | _ENC)
 #define PAGE_KERNEL_LARGE_EXEC	__pgprot_mask(__PAGE_KERNEL_LARGE_EXEC | _ENC)
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index 42cd333616c4..97143d87994c 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -370,7 +370,7 @@ struct x86_hw_tss {
 #define IO_BITMAP_OFFSET_INVALID	(__KERNEL_TSS_LIMIT + 1)
 
 struct entry_stack {
-	unsigned long		words[64];
+	char	stack[PAGE_SIZE];
 };
 
 struct entry_stack_page {
@@ -457,10 +457,8 @@ static inline unsigned long cpu_kernelmode_gs_base(int cpu)
 DECLARE_PER_CPU(unsigned int, irq_count);
 extern asmlinkage void ignore_sysret(void);
 
-#if IS_ENABLED(CONFIG_KVM)
 /* Save actual FS/GS selectors and bases to current->thread */
-void save_fsgs_for_kvm(void);
-#endif
+void current_save_fsgs(void);
 #else	/* X86_64 */
 #ifdef CONFIG_STACKPROTECTOR
 /*
@@ -575,7 +573,7 @@ native_load_sp0(unsigned long sp0)
 	this_cpu_write(cpu_tss_rw.x86_tss.sp0, sp0);
 }
 
-static inline void native_swapgs(void)
+static __always_inline void native_swapgs(void)
 {
 #ifdef CONFIG_X86_64
 	asm volatile("swapgs" ::: "memory");
@@ -678,70 +676,6 @@ static inline unsigned int cpuid_edx(unsigned int op)
 	return edx;
 }
 
-/*
- * This function forces the icache and prefetched instruction stream to
- * catch up with reality in two very specific cases:
- *
- *  a) Text was modified using one virtual address and is about to be executed
- *     from the same physical page at a different virtual address.
- *
- *  b) Text was modified on a different CPU, may subsequently be
- *     executed on this CPU, and you want to make sure the new version
- *     gets executed.  This generally means you're calling this in a IPI.
- *
- * If you're calling this for a different reason, you're probably doing
- * it wrong.
- */
-static inline void sync_core(void)
-{
-	/*
-	 * There are quite a few ways to do this.  IRET-to-self is nice
-	 * because it works on every CPU, at any CPL (so it's compatible
-	 * with paravirtualization), and it never exits to a hypervisor.
-	 * The only down sides are that it's a bit slow (it seems to be
-	 * a bit more than 2x slower than the fastest options) and that
-	 * it unmasks NMIs.  The "push %cs" is needed because, in
-	 * paravirtual environments, __KERNEL_CS may not be a valid CS
-	 * value when we do IRET directly.
-	 *
-	 * In case NMI unmasking or performance ever becomes a problem,
-	 * the next best option appears to be MOV-to-CR2 and an
-	 * unconditional jump.  That sequence also works on all CPUs,
-	 * but it will fault at CPL3 (i.e. Xen PV).
-	 *
-	 * CPUID is the conventional way, but it's nasty: it doesn't
-	 * exist on some 486-like CPUs, and it usually exits to a
-	 * hypervisor.
-	 *
-	 * Like all of Linux's memory ordering operations, this is a
-	 * compiler barrier as well.
-	 */
-#ifdef CONFIG_X86_32
-	asm volatile (
-		"pushfl\n\t"
-		"pushl %%cs\n\t"
-		"pushl $1f\n\t"
-		"iret\n\t"
-		"1:"
-		: ASM_CALL_CONSTRAINT : : "memory");
-#else
-	unsigned int tmp;
-
-	asm volatile (
-		"mov %%ss, %0\n\t"
-		"pushq %q0\n\t"
-		"pushq %%rsp\n\t"
-		"addq $8, (%%rsp)\n\t"
-		"pushfq\n\t"
-		"mov %%cs, %0\n\t"
-		"pushq %q0\n\t"
-		"pushq $1f\n\t"
-		"iretq\n\t"
-		"1:"
-		: "=&r" (tmp), ASM_CALL_CONSTRAINT : : "cc", "memory");
-#endif
-}
-
 extern void select_idle_routine(const struct cpuinfo_x86 *c);
 extern void amd_e400_c1e_apic_setup(void);
 
diff --git a/arch/x86/include/asm/ptrace.h b/arch/x86/include/asm/ptrace.h
index ebedeab48704..40aa69d04862 100644
--- a/arch/x86/include/asm/ptrace.h
+++ b/arch/x86/include/asm/ptrace.h
@@ -209,6 +209,11 @@ static inline void user_stack_pointer_set(struct pt_regs *regs,
 	regs->sp = val;
 }
 
+static __always_inline bool regs_irqs_disabled(struct pt_regs *regs)
+{
+	return !(regs->flags & X86_EFLAGS_IF);
+}
+
 /* Query offset/name of register from its name/offset */
 extern int regs_query_register_offset(const char *name);
 extern const char *regs_query_register_name(unsigned int offset);
@@ -278,7 +283,7 @@ static inline unsigned long *regs_get_kernel_stack_nth_addr(struct pt_regs *regs
 }
 
 /* To avoid include hell, we can't include uaccess.h */
-extern long probe_kernel_read(void *dst, const void *src, size_t size);
+extern long copy_from_kernel_nofault(void *dst, const void *src, size_t size);
 
 /**
  * regs_get_kernel_stack_nth() - get Nth entry of the stack
@@ -298,7 +303,7 @@ static inline unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs,
 
 	addr = regs_get_kernel_stack_nth_addr(regs, n);
 	if (addr) {
-		ret = probe_kernel_read(&val, addr, sizeof(val));
+		ret = copy_from_kernel_nofault(&val, addr, sizeof(val));
 		if (!ret)
 			return val;
 	}
diff --git a/arch/x86/include/asm/signal.h b/arch/x86/include/asm/signal.h
index 33d3c88a7225..6fd8410a3910 100644
--- a/arch/x86/include/asm/signal.h
+++ b/arch/x86/include/asm/signal.h
@@ -35,7 +35,6 @@ typedef sigset_t compat_sigset_t;
 #endif /* __ASSEMBLY__ */
 #include <uapi/asm/signal.h>
 #ifndef __ASSEMBLY__
-extern void do_signal(struct pt_regs *regs);
 
 #define __ARCH_HAS_SA_RESTORER
 
diff --git a/arch/x86/include/asm/sparsemem.h b/arch/x86/include/asm/sparsemem.h
index 199218719a86..6bfc878f6771 100644
--- a/arch/x86/include/asm/sparsemem.h
+++ b/arch/x86/include/asm/sparsemem.h
@@ -10,24 +10,20 @@
  *    field of the struct page
  *
  * SECTION_SIZE_BITS		2^n: size of each section
- * MAX_PHYSADDR_BITS		2^n: max size of physical address space
- * MAX_PHYSMEM_BITS		2^n: how much memory we can have in that space
+ * MAX_PHYSMEM_BITS		2^n: max size of physical address space
  *
  */
 
 #ifdef CONFIG_X86_32
 # ifdef CONFIG_X86_PAE
 #  define SECTION_SIZE_BITS	29
-#  define MAX_PHYSADDR_BITS	36
 #  define MAX_PHYSMEM_BITS	36
 # else
 #  define SECTION_SIZE_BITS	26
-#  define MAX_PHYSADDR_BITS	32
 #  define MAX_PHYSMEM_BITS	32
 # endif
 #else /* CONFIG_X86_32 */
 # define SECTION_SIZE_BITS	27 /* matt - 128 is convenient right now */
-# define MAX_PHYSADDR_BITS	(pgtable_l5_enabled() ? 52 : 44)
 # define MAX_PHYSMEM_BITS	(pgtable_l5_enabled() ? 52 : 46)
 #endif
 
diff --git a/arch/x86/include/asm/special_insns.h b/arch/x86/include/asm/special_insns.h
index eb8e781c4353..59a3e13204c3 100644
--- a/arch/x86/include/asm/special_insns.h
+++ b/arch/x86/include/asm/special_insns.h
@@ -234,7 +234,6 @@ static inline void clwb(volatile void *__p)
 
 #define nop() asm volatile ("nop")
 
-
 #endif /* __KERNEL__ */
 
 #endif /* _ASM_X86_SPECIAL_INSNS_H */
diff --git a/arch/x86/include/asm/stackprotector.h b/arch/x86/include/asm/stackprotector.h
index 9804a7957f4e..7fb482f0f25b 100644
--- a/arch/x86/include/asm/stackprotector.h
+++ b/arch/x86/include/asm/stackprotector.h
@@ -90,6 +90,15 @@ static __always_inline void boot_init_stack_canary(void)
 #endif
 }
 
+static inline void cpu_init_stack_canary(int cpu, struct task_struct *idle)
+{
+#ifdef CONFIG_X86_64
+	per_cpu(fixed_percpu_data.stack_canary, cpu) = idle->stack_canary;
+#else
+	per_cpu(stack_canary.canary, cpu) = idle->stack_canary;
+#endif
+}
+
 static inline void setup_stack_canary_segment(int cpu)
 {
 #ifdef CONFIG_X86_32
@@ -119,6 +128,9 @@ static inline void load_stack_canary_segment(void)
 static inline void setup_stack_canary_segment(int cpu)
 { }
 
+static inline void cpu_init_stack_canary(int cpu, struct task_struct *idle)
+{ }
+
 static inline void load_stack_canary_segment(void)
 {
 #ifdef CONFIG_X86_32
diff --git a/arch/x86/include/asm/sync_core.h b/arch/x86/include/asm/sync_core.h
index c67caafd3381..fdb5b356e59b 100644
--- a/arch/x86/include/asm/sync_core.h
+++ b/arch/x86/include/asm/sync_core.h
@@ -6,6 +6,78 @@
 #include <asm/processor.h>
 #include <asm/cpufeature.h>
 
+#ifdef CONFIG_X86_32
+static inline void iret_to_self(void)
+{
+	asm volatile (
+		"pushfl\n\t"
+		"pushl %%cs\n\t"
+		"pushl $1f\n\t"
+		"iret\n\t"
+		"1:"
+		: ASM_CALL_CONSTRAINT : : "memory");
+}
+#else
+static inline void iret_to_self(void)
+{
+	unsigned int tmp;
+
+	asm volatile (
+		"mov %%ss, %0\n\t"
+		"pushq %q0\n\t"
+		"pushq %%rsp\n\t"
+		"addq $8, (%%rsp)\n\t"
+		"pushfq\n\t"
+		"mov %%cs, %0\n\t"
+		"pushq %q0\n\t"
+		"pushq $1f\n\t"
+		"iretq\n\t"
+		"1:"
+		: "=&r" (tmp), ASM_CALL_CONSTRAINT : : "cc", "memory");
+}
+#endif /* CONFIG_X86_32 */
+
+/*
+ * This function forces the icache and prefetched instruction stream to
+ * catch up with reality in two very specific cases:
+ *
+ *  a) Text was modified using one virtual address and is about to be executed
+ *     from the same physical page at a different virtual address.
+ *
+ *  b) Text was modified on a different CPU, may subsequently be
+ *     executed on this CPU, and you want to make sure the new version
+ *     gets executed.  This generally means you're calling this in a IPI.
+ *
+ * If you're calling this for a different reason, you're probably doing
+ * it wrong.
+ */
+static inline void sync_core(void)
+{
+	/*
+	 * There are quite a few ways to do this.  IRET-to-self is nice
+	 * because it works on every CPU, at any CPL (so it's compatible
+	 * with paravirtualization), and it never exits to a hypervisor.
+	 * The only down sides are that it's a bit slow (it seems to be
+	 * a bit more than 2x slower than the fastest options) and that
+	 * it unmasks NMIs.  The "push %cs" is needed because, in
+	 * paravirtual environments, __KERNEL_CS may not be a valid CS
+	 * value when we do IRET directly.
+	 *
+	 * In case NMI unmasking or performance ever becomes a problem,
+	 * the next best option appears to be MOV-to-CR2 and an
+	 * unconditional jump.  That sequence also works on all CPUs,
+	 * but it will fault at CPL3 (i.e. Xen PV).
+	 *
+	 * CPUID is the conventional way, but it's nasty: it doesn't
+	 * exist on some 486-like CPUs, and it usually exits to a
+	 * hypervisor.
+	 *
+	 * Like all of Linux's memory ordering operations, this is a
+	 * compiler barrier as well.
+	 */
+	iret_to_self();
+}
+
 /*
  * Ensure that a core serializing instruction is issued before returning
  * to user-mode. x86 implements return to user-space through sysexit,
diff --git a/arch/x86/include/asm/thread_info.h b/arch/x86/include/asm/thread_info.h
index 8de8ceccb8bc..267701ae3d86 100644
--- a/arch/x86/include/asm/thread_info.h
+++ b/arch/x86/include/asm/thread_info.h
@@ -133,11 +133,6 @@ struct thread_info {
 #define _TIF_X32		(1 << TIF_X32)
 #define _TIF_FSCHECK		(1 << TIF_FSCHECK)
 
-/* Work to do before invoking the actual syscall. */
-#define _TIF_WORK_SYSCALL_ENTRY	\
-	(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_EMU | _TIF_SYSCALL_AUDIT |	\
-	 _TIF_SECCOMP | _TIF_SYSCALL_TRACEPOINT)
-
 /* flags to check in __switch_to() */
 #define _TIF_WORK_CTXSW_BASE					\
 	(_TIF_NOCPUID | _TIF_NOTSC | _TIF_BLOCKSTEP |		\
diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h
index 79d8d5496330..f4234575f3fd 100644
--- a/arch/x86/include/asm/topology.h
+++ b/arch/x86/include/asm/topology.h
@@ -193,7 +193,7 @@ static inline void sched_clear_itmt_support(void)
 }
 #endif /* CONFIG_SCHED_MC_PRIO */
 
-#ifdef CONFIG_SMP
+#if defined(CONFIG_SMP) && defined(CONFIG_X86_64)
 #include <asm/cpufeature.h>
 
 DECLARE_STATIC_KEY_FALSE(arch_scale_freq_key);
diff --git a/arch/x86/include/asm/tsc.h b/arch/x86/include/asm/tsc.h
index 8a0c25c6bf09..b7b2624fba86 100644
--- a/arch/x86/include/asm/tsc.h
+++ b/arch/x86/include/asm/tsc.h
@@ -7,9 +7,6 @@
 
 #include <asm/processor.h>
 
-#define NS_SCALE	10 /* 2^10, carefully chosen */
-#define US_SCALE	32 /* 2^32, arbitralrily chosen */
-
 /*
  * Standard way to access the cycle counter.
  */
diff --git a/arch/x86/include/asm/uaccess.h b/arch/x86/include/asm/uaccess.h
index 18dfa07d3ef0..2f3e8f2a958f 100644
--- a/arch/x86/include/asm/uaccess.h
+++ b/arch/x86/include/asm/uaccess.h
@@ -314,11 +314,14 @@ do {									\
 
 #define __get_user_size(x, ptr, size, retval)				\
 do {									\
+	unsigned char x_u8__;						\
+									\
 	retval = 0;							\
 	__chk_user_ptr(ptr);						\
 	switch (size) {							\
 	case 1:								\
-		__get_user_asm(x, ptr, retval, "b", "=q");		\
+		__get_user_asm(x_u8__, ptr, retval, "b", "=q");		\
+		(x) = x_u8__;						\
 		break;							\
 	case 2:								\
 		__get_user_asm(x, ptr, retval, "w", "=r");		\
diff --git a/arch/x86/include/asm/uv/bios.h b/arch/x86/include/asm/uv/bios.h
index 2fcc3ac12e76..70050d0136c3 100644
--- a/arch/x86/include/asm/uv/bios.h
+++ b/arch/x86/include/asm/uv/bios.h
@@ -72,7 +72,7 @@ struct uv_gam_range_entry {
 };
 
 #define	UV_SYSTAB_SIG			"UVST"
-#define	UV_SYSTAB_VERSION_1		1	/* UV1/2/3 BIOS version */
+#define	UV_SYSTAB_VERSION_1		1	/* UV2/3 BIOS version */
 #define	UV_SYSTAB_VERSION_UV4		0x400	/* UV4 BIOS base version */
 #define	UV_SYSTAB_VERSION_UV4_1		0x401	/* + gpa_shift */
 #define	UV_SYSTAB_VERSION_UV4_2		0x402	/* + TYPE_NVRAM/WINDOW/MBOX */
diff --git a/arch/x86/include/asm/uv/uv.h b/arch/x86/include/asm/uv/uv.h
index 3db85626048f..e48aea9ba47d 100644
--- a/arch/x86/include/asm/uv/uv.h
+++ b/arch/x86/include/asm/uv/uv.h
@@ -4,7 +4,7 @@
 
 #include <asm/tlbflush.h>
 
-enum uv_system_type {UV_NONE, UV_LEGACY_APIC, UV_X2APIC, UV_NON_UNIQUE_APIC};
+enum uv_system_type {UV_NONE, UV_LEGACY_APIC, UV_X2APIC};
 
 struct cpumask;
 struct mm_struct;
diff --git a/arch/x86/include/asm/uv/uv_bau.h b/arch/x86/include/asm/uv/uv_bau.h
index f1188bd47658..cd24804955d7 100644
--- a/arch/x86/include/asm/uv/uv_bau.h
+++ b/arch/x86/include/asm/uv/uv_bau.h
@@ -46,10 +46,7 @@
 #define UV_ACT_STATUS_SIZE		2
 #define UV_DISTRIBUTION_SIZE		256
 #define UV_SW_ACK_NPENDING		8
-#define UV1_NET_ENDPOINT_INTD		0x38
-#define UV2_NET_ENDPOINT_INTD		0x28
-#define UV_NET_ENDPOINT_INTD		(is_uv1_hub() ?			\
-			UV1_NET_ENDPOINT_INTD : UV2_NET_ENDPOINT_INTD)
+#define UV_NET_ENDPOINT_INTD		0x28
 #define UV_PAYLOADQ_GNODE_SHIFT		49
 #define UV_PTC_BASENAME			"sgi_uv/ptc_statistics"
 #define UV_BAU_BASENAME			"sgi_uv/bau_tunables"
@@ -64,14 +61,9 @@
  * UV2: Bit 19 selects between
  *  (0): 10 microsecond timebase and
  *  (1): 80 microseconds
- *  we're using 560us, similar to UV1: 65 units of 10us
+ *  we're using 560us
  */
-#define UV1_INTD_SOFT_ACK_TIMEOUT_PERIOD (9UL)
-#define UV2_INTD_SOFT_ACK_TIMEOUT_PERIOD (15UL)
-
-#define UV_INTD_SOFT_ACK_TIMEOUT_PERIOD	(is_uv1_hub() ?			\
-		UV1_INTD_SOFT_ACK_TIMEOUT_PERIOD :			\
-		UV2_INTD_SOFT_ACK_TIMEOUT_PERIOD)
+#define UV_INTD_SOFT_ACK_TIMEOUT_PERIOD	(15UL)
 /* assuming UV3 is the same */
 
 #define BAU_MISC_CONTROL_MULT_MASK	3
@@ -148,7 +140,6 @@
 
 #define UV_LB_SUBNODEID			0x10
 
-/* these two are the same for UV1 and UV2: */
 #define UV_SA_SHFT UVH_LB_BAU_MISC_CONTROL_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHFT
 #define UV_SA_MASK UVH_LB_BAU_MISC_CONTROL_INTD_SOFT_ACK_TIMEOUT_PERIOD_MASK
 /* 4 bits of software ack period */
@@ -189,8 +180,7 @@
 #define BAU_DESC_QUALIFIER		0x534749
 
 enum uv_bau_version {
-	UV_BAU_V1 = 1,
-	UV_BAU_V2,
+	UV_BAU_V2 = 2,
 	UV_BAU_V3,
 	UV_BAU_V4,
 };
@@ -233,12 +223,12 @@ struct bau_local_cpumask {
  */
 
 /**
- * struct uv1_2_3_bau_msg_payload - defines payload for INTD transactions
+ * struct uv2_3_bau_msg_payload - defines payload for INTD transactions
  * @address:		Signifies a page or all TLB's of the cpu
  * @sending_cpu:	CPU from which the message originates
  * @acknowledge_count:	CPUs on the destination Hub that received the interrupt
  */
-struct uv1_2_3_bau_msg_payload {
+struct uv2_3_bau_msg_payload {
 	u64 address;
 	u16 sending_cpu;
 	u16 acknowledge_count;
@@ -260,89 +250,6 @@ struct uv4_bau_msg_payload {
 };
 
 /*
- * UV1 Message header:  16 bytes (128 bits) (bytes 0x30-0x3f of descriptor)
- * see table 4.2.3.0.1 in broacast_assist spec.
- */
-struct uv1_bau_msg_header {
-	unsigned int	dest_subnodeid:6;	/* must be 0x10, for the LB */
-	/* bits 5:0 */
-	unsigned int	base_dest_nasid:15;	/* nasid of the first bit */
-	/* bits 20:6 */				/* in uvhub map */
-	unsigned int	command:8;		/* message type */
-	/* bits 28:21 */
-	/* 0x38: SN3net EndPoint Message */
-	unsigned int	rsvd_1:3;		/* must be zero */
-	/* bits 31:29 */
-	/* int will align on 32 bits */
-	unsigned int	rsvd_2:9;		/* must be zero */
-	/* bits 40:32 */
-	/* Suppl_A is 56-41 */
-	unsigned int	sequence:16;		/* message sequence number */
-	/* bits 56:41 */			/* becomes bytes 16-17 of msg */
-						/* Address field (96:57) is
-						   never used as an address
-						   (these are address bits
-						   42:3) */
-
-	unsigned int	rsvd_3:1;		/* must be zero */
-	/* bit 57 */
-	/* address bits 27:4 are payload */
-	/* these next 24  (58-81) bits become bytes 12-14 of msg */
-	/* bits 65:58 land in byte 12 */
-	unsigned int	replied_to:1;		/* sent as 0 by the source to
-						   byte 12 */
-	/* bit 58 */
-	unsigned int	msg_type:3;		/* software type of the
-						   message */
-	/* bits 61:59 */
-	unsigned int	canceled:1;		/* message canceled, resource
-						   is to be freed*/
-	/* bit 62 */
-	unsigned int	payload_1a:1;		/* not currently used */
-	/* bit 63 */
-	unsigned int	payload_1b:2;		/* not currently used */
-	/* bits 65:64 */
-
-	/* bits 73:66 land in byte 13 */
-	unsigned int	payload_1ca:6;		/* not currently used */
-	/* bits 71:66 */
-	unsigned int	payload_1c:2;		/* not currently used */
-	/* bits 73:72 */
-
-	/* bits 81:74 land in byte 14 */
-	unsigned int	payload_1d:6;		/* not currently used */
-	/* bits 79:74 */
-	unsigned int	payload_1e:2;		/* not currently used */
-	/* bits 81:80 */
-
-	unsigned int	rsvd_4:7;		/* must be zero */
-	/* bits 88:82 */
-	unsigned int	swack_flag:1;		/* software acknowledge flag */
-	/* bit 89 */
-						/* INTD trasactions at
-						   destination are to wait for
-						   software acknowledge */
-	unsigned int	rsvd_5:6;		/* must be zero */
-	/* bits 95:90 */
-	unsigned int	rsvd_6:5;		/* must be zero */
-	/* bits 100:96 */
-	unsigned int	int_both:1;		/* if 1, interrupt both sockets
-						   on the uvhub */
-	/* bit 101*/
-	unsigned int	fairness:3;		/* usually zero */
-	/* bits 104:102 */
-	unsigned int	multilevel:1;		/* multi-level multicast
-						   format */
-	/* bit 105 */
-	/* 0 for TLB: endpoint multi-unicast messages */
-	unsigned int	chaining:1;		/* next descriptor is part of
-						   this activation*/
-	/* bit 106 */
-	unsigned int	rsvd_7:21;		/* must be zero */
-	/* bits 127:107 */
-};
-
-/*
  * UV2 Message header:  16 bytes (128 bits) (bytes 0x30-0x3f of descriptor)
  * see figure 9-2 of harp_sys.pdf
  * assuming UV3 is the same
@@ -418,25 +325,14 @@ struct bau_desc {
 	 * message template, consisting of header and payload:
 	 */
 	union bau_msg_header {
-		struct uv1_bau_msg_header	uv1_hdr;
 		struct uv2_3_bau_msg_header	uv2_3_hdr;
 	} header;
 
 	union bau_payload_header {
-		struct uv1_2_3_bau_msg_payload	uv1_2_3;
+		struct uv2_3_bau_msg_payload	uv2_3;
 		struct uv4_bau_msg_payload	uv4;
 	} payload;
 };
-/* UV1:
- *   -payload--    ---------header------
- *   bytes 0-11    bits 41-56  bits 58-81
- *       A           B  (2)      C (3)
- *
- *            A/B/C are moved to:
- *       A            C          B
- *   bytes 0-11  bytes 12-14  bytes 16-17  (byte 15 filled in by hw as vector)
- *   ------------payload queue-----------
- */
 /* UV2:
  *   -payload--    ---------header------
  *   bytes 0-11    bits 70-78  bits 21-44
diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h
index 60ca0afdeaf9..100d66806503 100644
--- a/arch/x86/include/asm/uv/uv_hub.h
+++ b/arch/x86/include/asm/uv/uv_hub.h
@@ -224,17 +224,11 @@ static inline struct uv_hub_info_s *uv_cpu_hub_info(int cpu)
  * This is a software convention - NOT the hardware revision numbers in
  * the hub chip.
  */
-#define UV1_HUB_REVISION_BASE		1
 #define UV2_HUB_REVISION_BASE		3
 #define UV3_HUB_REVISION_BASE		5
 #define UV4_HUB_REVISION_BASE		7
 #define UV4A_HUB_REVISION_BASE		8	/* UV4 (fixed) rev 2 */
 
-static inline int is_uv1_hub(void)
-{
-	return is_uv_hubbed(uv(1));
-}
-
 static inline int is_uv2_hub(void)
 {
 	return is_uv_hubbed(uv(2));
@@ -265,7 +259,7 @@ static inline int is_uvx_hub(void)
 
 static inline int is_uv_hub(void)
 {
-	return is_uv1_hub() || is_uvx_hub();
+	return is_uvx_hub();
 }
 
 union uvh_apicid {
@@ -292,11 +286,6 @@ union uvh_apicid {
 #define UV_PNODE_TO_GNODE(p)		((p) |uv_hub_info->gnode_extra)
 #define UV_PNODE_TO_NASID(p)		(UV_PNODE_TO_GNODE(p) << 1)
 
-#define UV1_LOCAL_MMR_BASE		0xf4000000UL
-#define UV1_GLOBAL_MMR32_BASE		0xf8000000UL
-#define UV1_LOCAL_MMR_SIZE		(64UL * 1024 * 1024)
-#define UV1_GLOBAL_MMR32_SIZE		(64UL * 1024 * 1024)
-
 #define UV2_LOCAL_MMR_BASE		0xfa000000UL
 #define UV2_GLOBAL_MMR32_BASE		0xfc000000UL
 #define UV2_LOCAL_MMR_SIZE		(32UL * 1024 * 1024)
@@ -313,25 +302,21 @@ union uvh_apicid {
 #define UV4_GLOBAL_MMR32_SIZE		(16UL * 1024 * 1024)
 
 #define UV_LOCAL_MMR_BASE		(				\
-					is_uv1_hub() ? UV1_LOCAL_MMR_BASE : \
 					is_uv2_hub() ? UV2_LOCAL_MMR_BASE : \
 					is_uv3_hub() ? UV3_LOCAL_MMR_BASE : \
 					/*is_uv4_hub*/ UV4_LOCAL_MMR_BASE)
 
 #define UV_GLOBAL_MMR32_BASE		(				\
-					is_uv1_hub() ? UV1_GLOBAL_MMR32_BASE : \
 					is_uv2_hub() ? UV2_GLOBAL_MMR32_BASE : \
 					is_uv3_hub() ? UV3_GLOBAL_MMR32_BASE : \
 					/*is_uv4_hub*/ UV4_GLOBAL_MMR32_BASE)
 
 #define UV_LOCAL_MMR_SIZE		(				\
-					is_uv1_hub() ? UV1_LOCAL_MMR_SIZE : \
 					is_uv2_hub() ? UV2_LOCAL_MMR_SIZE : \
 					is_uv3_hub() ? UV3_LOCAL_MMR_SIZE : \
 					/*is_uv4_hub*/ UV4_LOCAL_MMR_SIZE)
 
 #define UV_GLOBAL_MMR32_SIZE		(				\
-					is_uv1_hub() ? UV1_GLOBAL_MMR32_SIZE : \
 					is_uv2_hub() ? UV2_GLOBAL_MMR32_SIZE : \
 					is_uv3_hub() ? UV3_GLOBAL_MMR32_SIZE : \
 					/*is_uv4_hub*/ UV4_GLOBAL_MMR32_SIZE)
@@ -352,8 +337,6 @@ union uvh_apicid {
 #define UVH_APICID		0x002D0E00L
 #define UV_APIC_PNODE_SHIFT	6
 
-#define UV_APICID_HIBIT_MASK	0xffff0000
-
 /* Local Bus from cpu's perspective */
 #define LOCAL_BUS_BASE		0x1c00000
 #define LOCAL_BUS_SIZE		(4 * 1024 * 1024)
@@ -560,15 +543,6 @@ static inline int uv_apicid_to_pnode(int apicid)
 	return s2pn ? s2pn[pnode - uv_hub_info->min_socket] : pnode;
 }
 
-/* Convert an apicid to the socket number on the blade */
-static inline int uv_apicid_to_socket(int apicid)
-{
-	if (is_uv1_hub())
-		return (apicid >> (uv_hub_info->apic_pnode_shift - 1)) & 1;
-	else
-		return 0;
-}
-
 /*
  * Access global MMRs using the low memory MMR32 space. This region supports
  * faster MMR access but not all MMRs are accessible in this space.
@@ -660,7 +634,7 @@ static inline int uv_cpu_blade_processor_id(int cpu)
 	return uv_cpu_info_per(cpu)->blade_cpu_id;
 }
 
-/* Blade number to Node number (UV1..UV4 is 1:1) */
+/* Blade number to Node number (UV2..UV4 is 1:1) */
 static inline int uv_blade_to_node(int blade)
 {
 	return blade;
@@ -674,7 +648,7 @@ static inline int uv_numa_blade_id(void)
 
 /*
  * Convert linux node number to the UV blade number.
- * .. Currently for UV1 thru UV4 the node and the blade are identical.
+ * .. Currently for UV2 thru UV4 the node and the blade are identical.
  * .. If this changes then you MUST check references to this function!
  */
 static inline int uv_node_to_blade_id(int nid)
@@ -682,7 +656,7 @@ static inline int uv_node_to_blade_id(int nid)
 	return nid;
 }
 
-/* Convert a cpu number to the the UV blade number */
+/* Convert a CPU number to the UV blade number */
 static inline int uv_cpu_to_blade_id(int cpu)
 {
 	return uv_node_to_blade_id(cpu_to_node(cpu));
@@ -821,8 +795,6 @@ static inline void uv_set_cpu_scir_bits(int cpu, unsigned char value)
 	}
 }
 
-extern unsigned int uv_apicid_hibits;
-
 /*
  * Get the minimum revision number of the hub chips within the partition.
  * (See UVx_HUB_REVISION_BASE above for specific values.)
diff --git a/arch/x86/include/asm/uv/uv_mmrs.h b/arch/x86/include/asm/uv/uv_mmrs.h
index 9ee5ed6e8b34..775bf143a072 100644
--- a/arch/x86/include/asm/uv/uv_mmrs.h
+++ b/arch/x86/include/asm/uv/uv_mmrs.h
@@ -19,7 +19,6 @@
  *
  * UVH  - definitions common to all UV hub types.
  * UVXH - definitions common to all UV eXtended hub types (currently 2, 3, 4).
- * UV1H - definitions specific to UV type 1 hub.
  * UV2H - definitions specific to UV type 2 hub.
  * UV3H - definitions specific to UV type 3 hub.
  * UV4H - definitions specific to UV type 4 hub.
@@ -35,19 +34,6 @@
  *
  * If the MMR exists on all hub types but have different addresses,
  * use a conditional operator to define the value at runtime.
- *	#define UV1Hxxx	a
- *	#define UV2Hxxx	b
- *	#define UV3Hxxx	c
- *	#define UV4Hxxx	d
- *	#define UV4AHxxx e
- *	#define UVHxxx	(is_uv1_hub() ? UV1Hxxx :
- *			(is_uv2_hub() ? UV2Hxxx :
- *			(is_uv3_hub() ? UV3Hxxx :
- *			(is_uv4a_hub() ? UV4AHxxx :
- *					UV4Hxxx))
- *
- * If the MMR exists on all hub types > 1 but have different addresses, the
- * variation using "UVX" as the prefix exists.
  *	#define UV2Hxxx	b
  *	#define UV3Hxxx	c
  *	#define UV4Hxxx	d
@@ -61,8 +47,6 @@
  *		unsigned long       v;
  *		struct uvh_xxx_s {	 # Common fields only
  *		} s;
- *		struct uv1h_xxx_s {	 # Full UV1 definition (*)
- *		} s1;
  *		struct uv2h_xxx_s {	 # Full UV2 definition (*)
  *		} s2;
  *		struct uv3h_xxx_s {	 # Full UV3 definition (*)
@@ -92,7 +76,6 @@
 
 #define UV_MMR_ENABLE		(1UL << 63)
 
-#define UV1_HUB_PART_NUMBER	0x88a5
 #define UV2_HUB_PART_NUMBER	0x8eb8
 #define UV2_HUB_PART_NUMBER_X	0x1111
 #define UV3_HUB_PART_NUMBER	0x9578
@@ -107,12 +90,10 @@ extern unsigned long uv_undefined(char *str);
 /* ========================================================================= */
 #define UVH_BAU_DATA_BROADCAST 0x61688UL
 
-#define UV1H_BAU_DATA_BROADCAST_32 0x440
 #define UV2H_BAU_DATA_BROADCAST_32 0x440
 #define UV3H_BAU_DATA_BROADCAST_32 0x440
 #define UV4H_BAU_DATA_BROADCAST_32 0x360
 #define UVH_BAU_DATA_BROADCAST_32 (					\
-	is_uv1_hub() ? UV1H_BAU_DATA_BROADCAST_32 :			\
 	is_uv2_hub() ? UV2H_BAU_DATA_BROADCAST_32 :			\
 	is_uv3_hub() ? UV3H_BAU_DATA_BROADCAST_32 :			\
 	/*is_uv4_hub*/ UV4H_BAU_DATA_BROADCAST_32)
@@ -134,12 +115,10 @@ union uvh_bau_data_broadcast_u {
 /* ========================================================================= */
 #define UVH_BAU_DATA_CONFIG 0x61680UL
 
-#define UV1H_BAU_DATA_CONFIG_32 0x438
 #define UV2H_BAU_DATA_CONFIG_32 0x438
 #define UV3H_BAU_DATA_CONFIG_32 0x438
 #define UV4H_BAU_DATA_CONFIG_32 0x358
 #define UVH_BAU_DATA_CONFIG_32 (					\
-	is_uv1_hub() ? UV1H_BAU_DATA_CONFIG_32 :			\
 	is_uv2_hub() ? UV2H_BAU_DATA_CONFIG_32 :			\
 	is_uv3_hub() ? UV3H_BAU_DATA_CONFIG_32 :			\
 	/*is_uv4_hub*/ UV4H_BAU_DATA_CONFIG_32)
@@ -189,117 +168,6 @@ union uvh_bau_data_config_u {
 #define UVH_EVENT_OCCURRED0_LB_HCERR_MASK		0x0000000000000001UL
 #define UVH_EVENT_OCCURRED0_RH_AOERR0_MASK		0x0000000000000800UL
 
-#define UV1H_EVENT_OCCURRED0_GR0_HCERR_SHFT		1
-#define UV1H_EVENT_OCCURRED0_GR1_HCERR_SHFT		2
-#define UV1H_EVENT_OCCURRED0_LH_HCERR_SHFT		3
-#define UV1H_EVENT_OCCURRED0_RH_HCERR_SHFT		4
-#define UV1H_EVENT_OCCURRED0_XN_HCERR_SHFT		5
-#define UV1H_EVENT_OCCURRED0_SI_HCERR_SHFT		6
-#define UV1H_EVENT_OCCURRED0_LB_AOERR0_SHFT		7
-#define UV1H_EVENT_OCCURRED0_GR0_AOERR0_SHFT		8
-#define UV1H_EVENT_OCCURRED0_GR1_AOERR0_SHFT		9
-#define UV1H_EVENT_OCCURRED0_LH_AOERR0_SHFT		10
-#define UV1H_EVENT_OCCURRED0_XN_AOERR0_SHFT		12
-#define UV1H_EVENT_OCCURRED0_SI_AOERR0_SHFT		13
-#define UV1H_EVENT_OCCURRED0_LB_AOERR1_SHFT		14
-#define UV1H_EVENT_OCCURRED0_GR0_AOERR1_SHFT		15
-#define UV1H_EVENT_OCCURRED0_GR1_AOERR1_SHFT		16
-#define UV1H_EVENT_OCCURRED0_LH_AOERR1_SHFT		17
-#define UV1H_EVENT_OCCURRED0_RH_AOERR1_SHFT		18
-#define UV1H_EVENT_OCCURRED0_XN_AOERR1_SHFT		19
-#define UV1H_EVENT_OCCURRED0_SI_AOERR1_SHFT		20
-#define UV1H_EVENT_OCCURRED0_RH_VPI_INT_SHFT		21
-#define UV1H_EVENT_OCCURRED0_SYSTEM_SHUTDOWN_INT_SHFT	22
-#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_0_SHFT		23
-#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_1_SHFT		24
-#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_2_SHFT		25
-#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_3_SHFT		26
-#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_4_SHFT		27
-#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_5_SHFT		28
-#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_6_SHFT		29
-#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_7_SHFT		30
-#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_8_SHFT		31
-#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_9_SHFT		32
-#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_10_SHFT		33
-#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_11_SHFT		34
-#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_12_SHFT		35
-#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_13_SHFT		36
-#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_14_SHFT		37
-#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_15_SHFT		38
-#define UV1H_EVENT_OCCURRED0_L1_NMI_INT_SHFT		39
-#define UV1H_EVENT_OCCURRED0_STOP_CLOCK_SHFT		40
-#define UV1H_EVENT_OCCURRED0_ASIC_TO_L1_SHFT		41
-#define UV1H_EVENT_OCCURRED0_L1_TO_ASIC_SHFT		42
-#define UV1H_EVENT_OCCURRED0_LTC_INT_SHFT		43
-#define UV1H_EVENT_OCCURRED0_LA_SEQ_TRIGGER_SHFT	44
-#define UV1H_EVENT_OCCURRED0_IPI_INT_SHFT		45
-#define UV1H_EVENT_OCCURRED0_EXTIO_INT0_SHFT		46
-#define UV1H_EVENT_OCCURRED0_EXTIO_INT1_SHFT		47
-#define UV1H_EVENT_OCCURRED0_EXTIO_INT2_SHFT		48
-#define UV1H_EVENT_OCCURRED0_EXTIO_INT3_SHFT		49
-#define UV1H_EVENT_OCCURRED0_PROFILE_INT_SHFT		50
-#define UV1H_EVENT_OCCURRED0_RTC0_SHFT			51
-#define UV1H_EVENT_OCCURRED0_RTC1_SHFT			52
-#define UV1H_EVENT_OCCURRED0_RTC2_SHFT			53
-#define UV1H_EVENT_OCCURRED0_RTC3_SHFT			54
-#define UV1H_EVENT_OCCURRED0_BAU_DATA_SHFT		55
-#define UV1H_EVENT_OCCURRED0_POWER_MANAGEMENT_REQ_SHFT	56
-#define UV1H_EVENT_OCCURRED0_GR0_HCERR_MASK		0x0000000000000002UL
-#define UV1H_EVENT_OCCURRED0_GR1_HCERR_MASK		0x0000000000000004UL
-#define UV1H_EVENT_OCCURRED0_LH_HCERR_MASK		0x0000000000000008UL
-#define UV1H_EVENT_OCCURRED0_RH_HCERR_MASK		0x0000000000000010UL
-#define UV1H_EVENT_OCCURRED0_XN_HCERR_MASK		0x0000000000000020UL
-#define UV1H_EVENT_OCCURRED0_SI_HCERR_MASK		0x0000000000000040UL
-#define UV1H_EVENT_OCCURRED0_LB_AOERR0_MASK		0x0000000000000080UL
-#define UV1H_EVENT_OCCURRED0_GR0_AOERR0_MASK		0x0000000000000100UL
-#define UV1H_EVENT_OCCURRED0_GR1_AOERR0_MASK		0x0000000000000200UL
-#define UV1H_EVENT_OCCURRED0_LH_AOERR0_MASK		0x0000000000000400UL
-#define UV1H_EVENT_OCCURRED0_XN_AOERR0_MASK		0x0000000000001000UL
-#define UV1H_EVENT_OCCURRED0_SI_AOERR0_MASK		0x0000000000002000UL
-#define UV1H_EVENT_OCCURRED0_LB_AOERR1_MASK		0x0000000000004000UL
-#define UV1H_EVENT_OCCURRED0_GR0_AOERR1_MASK		0x0000000000008000UL
-#define UV1H_EVENT_OCCURRED0_GR1_AOERR1_MASK		0x0000000000010000UL
-#define UV1H_EVENT_OCCURRED0_LH_AOERR1_MASK		0x0000000000020000UL
-#define UV1H_EVENT_OCCURRED0_RH_AOERR1_MASK		0x0000000000040000UL
-#define UV1H_EVENT_OCCURRED0_XN_AOERR1_MASK		0x0000000000080000UL
-#define UV1H_EVENT_OCCURRED0_SI_AOERR1_MASK		0x0000000000100000UL
-#define UV1H_EVENT_OCCURRED0_RH_VPI_INT_MASK		0x0000000000200000UL
-#define UV1H_EVENT_OCCURRED0_SYSTEM_SHUTDOWN_INT_MASK	0x0000000000400000UL
-#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_0_MASK		0x0000000000800000UL
-#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_1_MASK		0x0000000001000000UL
-#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_2_MASK		0x0000000002000000UL
-#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_3_MASK		0x0000000004000000UL
-#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_4_MASK		0x0000000008000000UL
-#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_5_MASK		0x0000000010000000UL
-#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_6_MASK		0x0000000020000000UL
-#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_7_MASK		0x0000000040000000UL
-#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_8_MASK		0x0000000080000000UL
-#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_9_MASK		0x0000000100000000UL
-#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_10_MASK		0x0000000200000000UL
-#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_11_MASK		0x0000000400000000UL
-#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_12_MASK		0x0000000800000000UL
-#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_13_MASK		0x0000001000000000UL
-#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_14_MASK		0x0000002000000000UL
-#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_15_MASK		0x0000004000000000UL
-#define UV1H_EVENT_OCCURRED0_L1_NMI_INT_MASK		0x0000008000000000UL
-#define UV1H_EVENT_OCCURRED0_STOP_CLOCK_MASK		0x0000010000000000UL
-#define UV1H_EVENT_OCCURRED0_ASIC_TO_L1_MASK		0x0000020000000000UL
-#define UV1H_EVENT_OCCURRED0_L1_TO_ASIC_MASK		0x0000040000000000UL
-#define UV1H_EVENT_OCCURRED0_LTC_INT_MASK		0x0000080000000000UL
-#define UV1H_EVENT_OCCURRED0_LA_SEQ_TRIGGER_MASK	0x0000100000000000UL
-#define UV1H_EVENT_OCCURRED0_IPI_INT_MASK		0x0000200000000000UL
-#define UV1H_EVENT_OCCURRED0_EXTIO_INT0_MASK		0x0000400000000000UL
-#define UV1H_EVENT_OCCURRED0_EXTIO_INT1_MASK		0x0000800000000000UL
-#define UV1H_EVENT_OCCURRED0_EXTIO_INT2_MASK		0x0001000000000000UL
-#define UV1H_EVENT_OCCURRED0_EXTIO_INT3_MASK		0x0002000000000000UL
-#define UV1H_EVENT_OCCURRED0_PROFILE_INT_MASK		0x0004000000000000UL
-#define UV1H_EVENT_OCCURRED0_RTC0_MASK			0x0008000000000000UL
-#define UV1H_EVENT_OCCURRED0_RTC1_MASK			0x0010000000000000UL
-#define UV1H_EVENT_OCCURRED0_RTC2_MASK			0x0020000000000000UL
-#define UV1H_EVENT_OCCURRED0_RTC3_MASK			0x0040000000000000UL
-#define UV1H_EVENT_OCCURRED0_BAU_DATA_MASK		0x0080000000000000UL
-#define UV1H_EVENT_OCCURRED0_POWER_MANAGEMENT_REQ_MASK	0x0100000000000000UL
-
 #define UVXH_EVENT_OCCURRED0_RH_HCERR_SHFT		2
 #define UVXH_EVENT_OCCURRED0_LH0_HCERR_SHFT		3
 #define UVXH_EVENT_OCCURRED0_LH1_HCERR_SHFT		4
@@ -605,7 +473,6 @@ union uvh_bau_data_config_u {
 #define UV4H_EVENT_OCCURRED0_EXTIO_INT3_MASK		0x8000000000000000UL
 
 #define UVH_EVENT_OCCURRED0_EXTIO_INT0_SHFT (				\
-	is_uv1_hub() ? UV1H_EVENT_OCCURRED0_EXTIO_INT0_SHFT :		\
 	is_uv2_hub() ? UV2H_EVENT_OCCURRED0_EXTIO_INT0_SHFT :		\
 	is_uv3_hub() ? UV3H_EVENT_OCCURRED0_EXTIO_INT0_SHFT :		\
 	/*is_uv4_hub*/ UV4H_EVENT_OCCURRED0_EXTIO_INT0_SHFT)
@@ -718,12 +585,10 @@ union uvh_event_occurred0_u {
 /* ========================================================================= */
 #define UVH_EXTIO_INT0_BROADCAST 0x61448UL
 
-#define UV1H_EXTIO_INT0_BROADCAST_32 0x3f0
 #define UV2H_EXTIO_INT0_BROADCAST_32 0x3f0
 #define UV3H_EXTIO_INT0_BROADCAST_32 0x3f0
 #define UV4H_EXTIO_INT0_BROADCAST_32 0x310
 #define UVH_EXTIO_INT0_BROADCAST_32 (					\
-	is_uv1_hub() ? UV1H_EXTIO_INT0_BROADCAST_32 :			\
 	is_uv2_hub() ? UV2H_EXTIO_INT0_BROADCAST_32 :			\
 	is_uv3_hub() ? UV3H_EXTIO_INT0_BROADCAST_32 :			\
 	/*is_uv4_hub*/ UV4H_EXTIO_INT0_BROADCAST_32)
@@ -821,12 +686,10 @@ union uvh_gr0_tlb_int1_config_u {
 /* ========================================================================= */
 /*                         UVH_GR0_TLB_MMR_CONTROL                           */
 /* ========================================================================= */
-#define UV1H_GR0_TLB_MMR_CONTROL 0x401080UL
 #define UV2H_GR0_TLB_MMR_CONTROL 0xc01080UL
 #define UV3H_GR0_TLB_MMR_CONTROL 0xc01080UL
 #define UV4H_GR0_TLB_MMR_CONTROL 0x601080UL
 #define UVH_GR0_TLB_MMR_CONTROL (					\
-	is_uv1_hub() ? UV1H_GR0_TLB_MMR_CONTROL :			\
 	is_uv2_hub() ? UV2H_GR0_TLB_MMR_CONTROL :			\
 	is_uv3_hub() ? UV3H_GR0_TLB_MMR_CONTROL :			\
 	/*is_uv4_hub*/ UV4H_GR0_TLB_MMR_CONTROL)
@@ -841,29 +704,6 @@ union uvh_gr0_tlb_int1_config_u {
 #define UVH_GR0_TLB_MMR_CONTROL_MMR_WRITE_MASK		0x0000000040000000UL
 #define UVH_GR0_TLB_MMR_CONTROL_MMR_READ_MASK		0x0000000080000000UL
 
-#define UV1H_GR0_TLB_MMR_CONTROL_INDEX_SHFT		0
-#define UV1H_GR0_TLB_MMR_CONTROL_MEM_SEL_SHFT		12
-#define UV1H_GR0_TLB_MMR_CONTROL_AUTO_VALID_EN_SHFT	16
-#define UV1H_GR0_TLB_MMR_CONTROL_MMR_HASH_INDEX_EN_SHFT	20
-#define UV1H_GR0_TLB_MMR_CONTROL_MMR_WRITE_SHFT		30
-#define UV1H_GR0_TLB_MMR_CONTROL_MMR_READ_SHFT		31
-#define UV1H_GR0_TLB_MMR_CONTROL_MMR_INJ_CON_SHFT	48
-#define UV1H_GR0_TLB_MMR_CONTROL_MMR_INJ_TLBRAM_SHFT	52
-#define UV1H_GR0_TLB_MMR_CONTROL_MMR_INJ_TLBPGSIZE_SHFT	54
-#define UV1H_GR0_TLB_MMR_CONTROL_MMR_INJ_TLBRREG_SHFT	56
-#define UV1H_GR0_TLB_MMR_CONTROL_MMR_INJ_TLBLRUV_SHFT	60
-#define UV1H_GR0_TLB_MMR_CONTROL_INDEX_MASK		0x0000000000000fffUL
-#define UV1H_GR0_TLB_MMR_CONTROL_MEM_SEL_MASK		0x0000000000003000UL
-#define UV1H_GR0_TLB_MMR_CONTROL_AUTO_VALID_EN_MASK	0x0000000000010000UL
-#define UV1H_GR0_TLB_MMR_CONTROL_MMR_HASH_INDEX_EN_MASK	0x0000000000100000UL
-#define UV1H_GR0_TLB_MMR_CONTROL_MMR_WRITE_MASK		0x0000000040000000UL
-#define UV1H_GR0_TLB_MMR_CONTROL_MMR_READ_MASK		0x0000000080000000UL
-#define UV1H_GR0_TLB_MMR_CONTROL_MMR_INJ_CON_MASK	0x0001000000000000UL
-#define UV1H_GR0_TLB_MMR_CONTROL_MMR_INJ_TLBRAM_MASK	0x0010000000000000UL
-#define UV1H_GR0_TLB_MMR_CONTROL_MMR_INJ_TLBPGSIZE_MASK	0x0040000000000000UL
-#define UV1H_GR0_TLB_MMR_CONTROL_MMR_INJ_TLBRREG_MASK	0x0100000000000000UL
-#define UV1H_GR0_TLB_MMR_CONTROL_MMR_INJ_TLBLRUV_MASK	0x1000000000000000UL
-
 #define UVXH_GR0_TLB_MMR_CONTROL_INDEX_SHFT		0
 #define UVXH_GR0_TLB_MMR_CONTROL_AUTO_VALID_EN_SHFT	16
 #define UVXH_GR0_TLB_MMR_CONTROL_MMR_HASH_INDEX_EN_SHFT	20
@@ -932,17 +772,14 @@ union uvh_gr0_tlb_int1_config_u {
 #define UV4H_GR0_TLB_MMR_CONTROL_PAGE_SIZE_MASK		0xf800000000000000UL
 
 #define UVH_GR0_TLB_MMR_CONTROL_INDEX_MASK (				\
-	is_uv1_hub() ? UV1H_GR0_TLB_MMR_CONTROL_INDEX_MASK :		\
 	is_uv2_hub() ? UV2H_GR0_TLB_MMR_CONTROL_INDEX_MASK :		\
 	is_uv3_hub() ? UV3H_GR0_TLB_MMR_CONTROL_INDEX_MASK :		\
 	/*is_uv4_hub*/ UV4H_GR0_TLB_MMR_CONTROL_INDEX_MASK)
 #define UVH_GR0_TLB_MMR_CONTROL_MEM_SEL_MASK (				\
-	is_uv1_hub() ? UV1H_GR0_TLB_MMR_CONTROL_MEM_SEL_MASK :		\
 	is_uv2_hub() ? UV2H_GR0_TLB_MMR_CONTROL_MEM_SEL_MASK :		\
 	is_uv3_hub() ? UV3H_GR0_TLB_MMR_CONTROL_MEM_SEL_MASK :		\
 	/*is_uv4_hub*/ UV4H_GR0_TLB_MMR_CONTROL_MEM_SEL_MASK)
 #define UVH_GR0_TLB_MMR_CONTROL_MEM_SEL_SHFT (				\
-	is_uv1_hub() ? UV1H_GR0_TLB_MMR_CONTROL_MEM_SEL_SHFT :		\
 	is_uv2_hub() ? UV2H_GR0_TLB_MMR_CONTROL_MEM_SEL_SHFT :		\
 	is_uv3_hub() ? UV3H_GR0_TLB_MMR_CONTROL_MEM_SEL_SHFT :		\
 	/*is_uv4_hub*/ UV4H_GR0_TLB_MMR_CONTROL_MEM_SEL_SHFT)
@@ -961,28 +798,6 @@ union uvh_gr0_tlb_mmr_control_u {
 		unsigned long	rsvd_49_51:3;
 		unsigned long	rsvd_52_63:12;
 	} s;
-	struct uv1h_gr0_tlb_mmr_control_s {
-		unsigned long	index:12;			/* RW */
-		unsigned long	mem_sel:2;			/* RW */
-		unsigned long	rsvd_14_15:2;
-		unsigned long	auto_valid_en:1;		/* RW */
-		unsigned long	rsvd_17_19:3;
-		unsigned long	mmr_hash_index_en:1;		/* RW */
-		unsigned long	rsvd_21_29:9;
-		unsigned long	mmr_write:1;			/* WP */
-		unsigned long	mmr_read:1;			/* WP */
-		unsigned long	rsvd_32_47:16;
-		unsigned long	mmr_inj_con:1;			/* RW */
-		unsigned long	rsvd_49_51:3;
-		unsigned long	mmr_inj_tlbram:1;		/* RW */
-		unsigned long	rsvd_53:1;
-		unsigned long	mmr_inj_tlbpgsize:1;		/* RW */
-		unsigned long	rsvd_55:1;
-		unsigned long	mmr_inj_tlbrreg:1;		/* RW */
-		unsigned long	rsvd_57_59:3;
-		unsigned long	mmr_inj_tlblruv:1;		/* RW */
-		unsigned long	rsvd_61_63:3;
-	} s1;
 	struct uvxh_gr0_tlb_mmr_control_s {
 		unsigned long	rsvd_0_15:16;
 		unsigned long	auto_valid_en:1;		/* RW */
@@ -1055,27 +870,16 @@ union uvh_gr0_tlb_mmr_control_u {
 /* ========================================================================= */
 /*                       UVH_GR0_TLB_MMR_READ_DATA_HI                        */
 /* ========================================================================= */
-#define UV1H_GR0_TLB_MMR_READ_DATA_HI 0x4010a0UL
 #define UV2H_GR0_TLB_MMR_READ_DATA_HI 0xc010a0UL
 #define UV3H_GR0_TLB_MMR_READ_DATA_HI 0xc010a0UL
 #define UV4H_GR0_TLB_MMR_READ_DATA_HI 0x6010a0UL
 #define UVH_GR0_TLB_MMR_READ_DATA_HI (					\
-	is_uv1_hub() ? UV1H_GR0_TLB_MMR_READ_DATA_HI :			\
 	is_uv2_hub() ? UV2H_GR0_TLB_MMR_READ_DATA_HI :			\
 	is_uv3_hub() ? UV3H_GR0_TLB_MMR_READ_DATA_HI :			\
 	/*is_uv4_hub*/ UV4H_GR0_TLB_MMR_READ_DATA_HI)
 
 #define UVH_GR0_TLB_MMR_READ_DATA_HI_PFN_SHFT		0
 
-#define UV1H_GR0_TLB_MMR_READ_DATA_HI_PFN_SHFT		0
-#define UV1H_GR0_TLB_MMR_READ_DATA_HI_GAA_SHFT		41
-#define UV1H_GR0_TLB_MMR_READ_DATA_HI_DIRTY_SHFT	43
-#define UV1H_GR0_TLB_MMR_READ_DATA_HI_LARGER_SHFT	44
-#define UV1H_GR0_TLB_MMR_READ_DATA_HI_PFN_MASK		0x000001ffffffffffUL
-#define UV1H_GR0_TLB_MMR_READ_DATA_HI_GAA_MASK		0x0000060000000000UL
-#define UV1H_GR0_TLB_MMR_READ_DATA_HI_DIRTY_MASK	0x0000080000000000UL
-#define UV1H_GR0_TLB_MMR_READ_DATA_HI_LARGER_MASK	0x0000100000000000UL
-
 #define UVXH_GR0_TLB_MMR_READ_DATA_HI_PFN_SHFT		0
 
 #define UV2H_GR0_TLB_MMR_READ_DATA_HI_PFN_SHFT		0
@@ -1118,13 +922,6 @@ union uvh_gr0_tlb_mmr_control_u {
 
 union uvh_gr0_tlb_mmr_read_data_hi_u {
 	unsigned long	v;
-	struct uv1h_gr0_tlb_mmr_read_data_hi_s {
-		unsigned long	pfn:41;				/* RO */
-		unsigned long	gaa:2;				/* RO */
-		unsigned long	dirty:1;			/* RO */
-		unsigned long	larger:1;			/* RO */
-		unsigned long	rsvd_45_63:19;
-	} s1;
 	struct uv2h_gr0_tlb_mmr_read_data_hi_s {
 		unsigned long	pfn:41;				/* RO */
 		unsigned long	gaa:2;				/* RO */
@@ -1156,12 +953,10 @@ union uvh_gr0_tlb_mmr_read_data_hi_u {
 /* ========================================================================= */
 /*                       UVH_GR0_TLB_MMR_READ_DATA_LO                        */
 /* ========================================================================= */
-#define UV1H_GR0_TLB_MMR_READ_DATA_LO 0x4010a8UL
 #define UV2H_GR0_TLB_MMR_READ_DATA_LO 0xc010a8UL
 #define UV3H_GR0_TLB_MMR_READ_DATA_LO 0xc010a8UL
 #define UV4H_GR0_TLB_MMR_READ_DATA_LO 0x6010a8UL
 #define UVH_GR0_TLB_MMR_READ_DATA_LO (					\
-	is_uv1_hub() ? UV1H_GR0_TLB_MMR_READ_DATA_LO :			\
 	is_uv2_hub() ? UV2H_GR0_TLB_MMR_READ_DATA_LO :			\
 	is_uv3_hub() ? UV3H_GR0_TLB_MMR_READ_DATA_LO :			\
 	/*is_uv4_hub*/ UV4H_GR0_TLB_MMR_READ_DATA_LO)
@@ -1173,13 +968,6 @@ union uvh_gr0_tlb_mmr_read_data_hi_u {
 #define UVH_GR0_TLB_MMR_READ_DATA_LO_ASID_MASK		0x7fffff8000000000UL
 #define UVH_GR0_TLB_MMR_READ_DATA_LO_VALID_MASK		0x8000000000000000UL
 
-#define UV1H_GR0_TLB_MMR_READ_DATA_LO_VPN_SHFT		0
-#define UV1H_GR0_TLB_MMR_READ_DATA_LO_ASID_SHFT		39
-#define UV1H_GR0_TLB_MMR_READ_DATA_LO_VALID_SHFT	63
-#define UV1H_GR0_TLB_MMR_READ_DATA_LO_VPN_MASK		0x0000007fffffffffUL
-#define UV1H_GR0_TLB_MMR_READ_DATA_LO_ASID_MASK		0x7fffff8000000000UL
-#define UV1H_GR0_TLB_MMR_READ_DATA_LO_VALID_MASK	0x8000000000000000UL
-
 #define UVXH_GR0_TLB_MMR_READ_DATA_LO_VPN_SHFT		0
 #define UVXH_GR0_TLB_MMR_READ_DATA_LO_ASID_SHFT		39
 #define UVXH_GR0_TLB_MMR_READ_DATA_LO_VALID_SHFT	63
@@ -1216,11 +1004,6 @@ union uvh_gr0_tlb_mmr_read_data_lo_u {
 		unsigned long	asid:24;			/* RO */
 		unsigned long	valid:1;			/* RO */
 	} s;
-	struct uv1h_gr0_tlb_mmr_read_data_lo_s {
-		unsigned long	vpn:39;				/* RO */
-		unsigned long	asid:24;			/* RO */
-		unsigned long	valid:1;			/* RO */
-	} s1;
 	struct uvxh_gr0_tlb_mmr_read_data_lo_s {
 		unsigned long	vpn:39;				/* RO */
 		unsigned long	asid:24;			/* RO */
@@ -1246,12 +1029,10 @@ union uvh_gr0_tlb_mmr_read_data_lo_u {
 /* ========================================================================= */
 /*                         UVH_GR1_TLB_INT0_CONFIG                           */
 /* ========================================================================= */
-#define UV1H_GR1_TLB_INT0_CONFIG 0x61f00UL
 #define UV2H_GR1_TLB_INT0_CONFIG 0x61f00UL
 #define UV3H_GR1_TLB_INT0_CONFIG 0x61f00UL
 #define UV4H_GR1_TLB_INT0_CONFIG 0x62100UL
 #define UVH_GR1_TLB_INT0_CONFIG (					\
-	is_uv1_hub() ? UV1H_GR1_TLB_INT0_CONFIG :			\
 	is_uv2_hub() ? UV2H_GR1_TLB_INT0_CONFIG :			\
 	is_uv3_hub() ? UV3H_GR1_TLB_INT0_CONFIG :			\
 	/*is_uv4_hub*/ UV4H_GR1_TLB_INT0_CONFIG)
@@ -1293,12 +1074,10 @@ union uvh_gr1_tlb_int0_config_u {
 /* ========================================================================= */
 /*                         UVH_GR1_TLB_INT1_CONFIG                           */
 /* ========================================================================= */
-#define UV1H_GR1_TLB_INT1_CONFIG 0x61f40UL
 #define UV2H_GR1_TLB_INT1_CONFIG 0x61f40UL
 #define UV3H_GR1_TLB_INT1_CONFIG 0x61f40UL
 #define UV4H_GR1_TLB_INT1_CONFIG 0x62140UL
 #define UVH_GR1_TLB_INT1_CONFIG (					\
-	is_uv1_hub() ? UV1H_GR1_TLB_INT1_CONFIG :			\
 	is_uv2_hub() ? UV2H_GR1_TLB_INT1_CONFIG :			\
 	is_uv3_hub() ? UV3H_GR1_TLB_INT1_CONFIG :			\
 	/*is_uv4_hub*/ UV4H_GR1_TLB_INT1_CONFIG)
@@ -1340,12 +1119,10 @@ union uvh_gr1_tlb_int1_config_u {
 /* ========================================================================= */
 /*                         UVH_GR1_TLB_MMR_CONTROL                           */
 /* ========================================================================= */
-#define UV1H_GR1_TLB_MMR_CONTROL 0x801080UL
 #define UV2H_GR1_TLB_MMR_CONTROL 0x1001080UL
 #define UV3H_GR1_TLB_MMR_CONTROL 0x1001080UL
 #define UV4H_GR1_TLB_MMR_CONTROL 0x701080UL
 #define UVH_GR1_TLB_MMR_CONTROL (					\
-	is_uv1_hub() ? UV1H_GR1_TLB_MMR_CONTROL :			\
 	is_uv2_hub() ? UV2H_GR1_TLB_MMR_CONTROL :			\
 	is_uv3_hub() ? UV3H_GR1_TLB_MMR_CONTROL :			\
 	/*is_uv4_hub*/ UV4H_GR1_TLB_MMR_CONTROL)
@@ -1360,29 +1137,6 @@ union uvh_gr1_tlb_int1_config_u {
 #define UVH_GR1_TLB_MMR_CONTROL_MMR_WRITE_MASK		0x0000000040000000UL
 #define UVH_GR1_TLB_MMR_CONTROL_MMR_READ_MASK		0x0000000080000000UL
 
-#define UV1H_GR1_TLB_MMR_CONTROL_INDEX_SHFT		0
-#define UV1H_GR1_TLB_MMR_CONTROL_MEM_SEL_SHFT		12
-#define UV1H_GR1_TLB_MMR_CONTROL_AUTO_VALID_EN_SHFT	16
-#define UV1H_GR1_TLB_MMR_CONTROL_MMR_HASH_INDEX_EN_SHFT	20
-#define UV1H_GR1_TLB_MMR_CONTROL_MMR_WRITE_SHFT		30
-#define UV1H_GR1_TLB_MMR_CONTROL_MMR_READ_SHFT		31
-#define UV1H_GR1_TLB_MMR_CONTROL_MMR_INJ_CON_SHFT	48
-#define UV1H_GR1_TLB_MMR_CONTROL_MMR_INJ_TLBRAM_SHFT	52
-#define UV1H_GR1_TLB_MMR_CONTROL_MMR_INJ_TLBPGSIZE_SHFT	54
-#define UV1H_GR1_TLB_MMR_CONTROL_MMR_INJ_TLBRREG_SHFT	56
-#define UV1H_GR1_TLB_MMR_CONTROL_MMR_INJ_TLBLRUV_SHFT	60
-#define UV1H_GR1_TLB_MMR_CONTROL_INDEX_MASK		0x0000000000000fffUL
-#define UV1H_GR1_TLB_MMR_CONTROL_MEM_SEL_MASK		0x0000000000003000UL
-#define UV1H_GR1_TLB_MMR_CONTROL_AUTO_VALID_EN_MASK	0x0000000000010000UL
-#define UV1H_GR1_TLB_MMR_CONTROL_MMR_HASH_INDEX_EN_MASK	0x0000000000100000UL
-#define UV1H_GR1_TLB_MMR_CONTROL_MMR_WRITE_MASK		0x0000000040000000UL
-#define UV1H_GR1_TLB_MMR_CONTROL_MMR_READ_MASK		0x0000000080000000UL
-#define UV1H_GR1_TLB_MMR_CONTROL_MMR_INJ_CON_MASK	0x0001000000000000UL
-#define UV1H_GR1_TLB_MMR_CONTROL_MMR_INJ_TLBRAM_MASK	0x0010000000000000UL
-#define UV1H_GR1_TLB_MMR_CONTROL_MMR_INJ_TLBPGSIZE_MASK	0x0040000000000000UL
-#define UV1H_GR1_TLB_MMR_CONTROL_MMR_INJ_TLBRREG_MASK	0x0100000000000000UL
-#define UV1H_GR1_TLB_MMR_CONTROL_MMR_INJ_TLBLRUV_MASK	0x1000000000000000UL
-
 #define UVXH_GR1_TLB_MMR_CONTROL_INDEX_SHFT		0
 #define UVXH_GR1_TLB_MMR_CONTROL_AUTO_VALID_EN_SHFT	16
 #define UVXH_GR1_TLB_MMR_CONTROL_MMR_HASH_INDEX_EN_SHFT	20
@@ -1465,28 +1219,6 @@ union uvh_gr1_tlb_mmr_control_u {
 		unsigned long	rsvd_49_51:3;
 		unsigned long	rsvd_52_63:12;
 	} s;
-	struct uv1h_gr1_tlb_mmr_control_s {
-		unsigned long	index:12;			/* RW */
-		unsigned long	mem_sel:2;			/* RW */
-		unsigned long	rsvd_14_15:2;
-		unsigned long	auto_valid_en:1;		/* RW */
-		unsigned long	rsvd_17_19:3;
-		unsigned long	mmr_hash_index_en:1;		/* RW */
-		unsigned long	rsvd_21_29:9;
-		unsigned long	mmr_write:1;			/* WP */
-		unsigned long	mmr_read:1;			/* WP */
-		unsigned long	rsvd_32_47:16;
-		unsigned long	mmr_inj_con:1;			/* RW */
-		unsigned long	rsvd_49_51:3;
-		unsigned long	mmr_inj_tlbram:1;		/* RW */
-		unsigned long	rsvd_53:1;
-		unsigned long	mmr_inj_tlbpgsize:1;		/* RW */
-		unsigned long	rsvd_55:1;
-		unsigned long	mmr_inj_tlbrreg:1;		/* RW */
-		unsigned long	rsvd_57_59:3;
-		unsigned long	mmr_inj_tlblruv:1;		/* RW */
-		unsigned long	rsvd_61_63:3;
-	} s1;
 	struct uvxh_gr1_tlb_mmr_control_s {
 		unsigned long	rsvd_0_15:16;
 		unsigned long	auto_valid_en:1;		/* RW */
@@ -1559,27 +1291,16 @@ union uvh_gr1_tlb_mmr_control_u {
 /* ========================================================================= */
 /*                       UVH_GR1_TLB_MMR_READ_DATA_HI                        */
 /* ========================================================================= */
-#define UV1H_GR1_TLB_MMR_READ_DATA_HI 0x8010a0UL
 #define UV2H_GR1_TLB_MMR_READ_DATA_HI 0x10010a0UL
 #define UV3H_GR1_TLB_MMR_READ_DATA_HI 0x10010a0UL
 #define UV4H_GR1_TLB_MMR_READ_DATA_HI 0x7010a0UL
 #define UVH_GR1_TLB_MMR_READ_DATA_HI (					\
-	is_uv1_hub() ? UV1H_GR1_TLB_MMR_READ_DATA_HI :			\
 	is_uv2_hub() ? UV2H_GR1_TLB_MMR_READ_DATA_HI :			\
 	is_uv3_hub() ? UV3H_GR1_TLB_MMR_READ_DATA_HI :			\
 	/*is_uv4_hub*/ UV4H_GR1_TLB_MMR_READ_DATA_HI)
 
 #define UVH_GR1_TLB_MMR_READ_DATA_HI_PFN_SHFT		0
 
-#define UV1H_GR1_TLB_MMR_READ_DATA_HI_PFN_SHFT		0
-#define UV1H_GR1_TLB_MMR_READ_DATA_HI_GAA_SHFT		41
-#define UV1H_GR1_TLB_MMR_READ_DATA_HI_DIRTY_SHFT	43
-#define UV1H_GR1_TLB_MMR_READ_DATA_HI_LARGER_SHFT	44
-#define UV1H_GR1_TLB_MMR_READ_DATA_HI_PFN_MASK		0x000001ffffffffffUL
-#define UV1H_GR1_TLB_MMR_READ_DATA_HI_GAA_MASK		0x0000060000000000UL
-#define UV1H_GR1_TLB_MMR_READ_DATA_HI_DIRTY_MASK	0x0000080000000000UL
-#define UV1H_GR1_TLB_MMR_READ_DATA_HI_LARGER_MASK	0x0000100000000000UL
-
 #define UVXH_GR1_TLB_MMR_READ_DATA_HI_PFN_SHFT		0
 
 #define UV2H_GR1_TLB_MMR_READ_DATA_HI_PFN_SHFT		0
@@ -1622,13 +1343,6 @@ union uvh_gr1_tlb_mmr_control_u {
 
 union uvh_gr1_tlb_mmr_read_data_hi_u {
 	unsigned long	v;
-	struct uv1h_gr1_tlb_mmr_read_data_hi_s {
-		unsigned long	pfn:41;				/* RO */
-		unsigned long	gaa:2;				/* RO */
-		unsigned long	dirty:1;			/* RO */
-		unsigned long	larger:1;			/* RO */
-		unsigned long	rsvd_45_63:19;
-	} s1;
 	struct uv2h_gr1_tlb_mmr_read_data_hi_s {
 		unsigned long	pfn:41;				/* RO */
 		unsigned long	gaa:2;				/* RO */
@@ -1660,12 +1374,10 @@ union uvh_gr1_tlb_mmr_read_data_hi_u {
 /* ========================================================================= */
 /*                       UVH_GR1_TLB_MMR_READ_DATA_LO                        */
 /* ========================================================================= */
-#define UV1H_GR1_TLB_MMR_READ_DATA_LO 0x8010a8UL
 #define UV2H_GR1_TLB_MMR_READ_DATA_LO 0x10010a8UL
 #define UV3H_GR1_TLB_MMR_READ_DATA_LO 0x10010a8UL
 #define UV4H_GR1_TLB_MMR_READ_DATA_LO 0x7010a8UL
 #define UVH_GR1_TLB_MMR_READ_DATA_LO (					\
-	is_uv1_hub() ? UV1H_GR1_TLB_MMR_READ_DATA_LO :			\
 	is_uv2_hub() ? UV2H_GR1_TLB_MMR_READ_DATA_LO :			\
 	is_uv3_hub() ? UV3H_GR1_TLB_MMR_READ_DATA_LO :			\
 	/*is_uv4_hub*/ UV4H_GR1_TLB_MMR_READ_DATA_LO)
@@ -1677,13 +1389,6 @@ union uvh_gr1_tlb_mmr_read_data_hi_u {
 #define UVH_GR1_TLB_MMR_READ_DATA_LO_ASID_MASK		0x7fffff8000000000UL
 #define UVH_GR1_TLB_MMR_READ_DATA_LO_VALID_MASK		0x8000000000000000UL
 
-#define UV1H_GR1_TLB_MMR_READ_DATA_LO_VPN_SHFT		0
-#define UV1H_GR1_TLB_MMR_READ_DATA_LO_ASID_SHFT		39
-#define UV1H_GR1_TLB_MMR_READ_DATA_LO_VALID_SHFT	63
-#define UV1H_GR1_TLB_MMR_READ_DATA_LO_VPN_MASK		0x0000007fffffffffUL
-#define UV1H_GR1_TLB_MMR_READ_DATA_LO_ASID_MASK		0x7fffff8000000000UL
-#define UV1H_GR1_TLB_MMR_READ_DATA_LO_VALID_MASK	0x8000000000000000UL
-
 #define UVXH_GR1_TLB_MMR_READ_DATA_LO_VPN_SHFT		0
 #define UVXH_GR1_TLB_MMR_READ_DATA_LO_ASID_SHFT		39
 #define UVXH_GR1_TLB_MMR_READ_DATA_LO_VALID_SHFT	63
@@ -1720,11 +1425,6 @@ union uvh_gr1_tlb_mmr_read_data_lo_u {
 		unsigned long	asid:24;			/* RO */
 		unsigned long	valid:1;			/* RO */
 	} s;
-	struct uv1h_gr1_tlb_mmr_read_data_lo_s {
-		unsigned long	vpn:39;				/* RO */
-		unsigned long	asid:24;			/* RO */
-		unsigned long	valid:1;			/* RO */
-	} s1;
 	struct uvxh_gr1_tlb_mmr_read_data_lo_s {
 		unsigned long	vpn:39;				/* RO */
 		unsigned long	asid:24;			/* RO */
@@ -1770,9 +1470,6 @@ union uvh_int_cmpb_u {
 #define UVH_INT_CMPC 0x22100UL
 
 
-#define UV1H_INT_CMPC_REAL_TIME_CMPC_SHFT		0
-#define UV1H_INT_CMPC_REAL_TIME_CMPC_MASK		0x00ffffffffffffffUL
-
 #define UVXH_INT_CMPC_REAL_TIME_CMP_2_SHFT		0
 #define UVXH_INT_CMPC_REAL_TIME_CMP_2_MASK		0x00ffffffffffffffUL
 
@@ -1791,9 +1488,6 @@ union uvh_int_cmpc_u {
 #define UVH_INT_CMPD 0x22180UL
 
 
-#define UV1H_INT_CMPD_REAL_TIME_CMPD_SHFT		0
-#define UV1H_INT_CMPD_REAL_TIME_CMPD_MASK		0x00ffffffffffffffUL
-
 #define UVXH_INT_CMPD_REAL_TIME_CMP_3_SHFT		0
 #define UVXH_INT_CMPD_REAL_TIME_CMP_3_MASK		0x00ffffffffffffffUL
 
@@ -1811,12 +1505,10 @@ union uvh_int_cmpd_u {
 /* ========================================================================= */
 #define UVH_IPI_INT 0x60500UL
 
-#define UV1H_IPI_INT_32 0x348
 #define UV2H_IPI_INT_32 0x348
 #define UV3H_IPI_INT_32 0x348
 #define UV4H_IPI_INT_32 0x268
 #define UVH_IPI_INT_32 (						\
-	is_uv1_hub() ? UV1H_IPI_INT_32 :				\
 	is_uv2_hub() ? UV2H_IPI_INT_32 :				\
 	is_uv3_hub() ? UV3H_IPI_INT_32 :				\
 	/*is_uv4_hub*/ UV4H_IPI_INT_32)
@@ -1849,24 +1541,16 @@ union uvh_ipi_int_u {
 /* ========================================================================= */
 /*                   UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST                     */
 /* ========================================================================= */
-#define UV1H_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST 0x320050UL
 #define UV2H_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST 0x320050UL
 #define UV3H_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST 0x320050UL
 #define UV4H_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST uv_undefined("UV4H_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST")
 #define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST (				\
-	is_uv1_hub() ? UV1H_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST :		\
 	is_uv2_hub() ? UV2H_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST :		\
 	is_uv3_hub() ? UV3H_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST :		\
 	/*is_uv4_hub*/ UV4H_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST)
 #define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST_32 0x9c0
 
 
-#define UV1H_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST_ADDRESS_SHFT 4
-#define UV1H_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST_NODE_ID_SHFT 49
-#define UV1H_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST_ADDRESS_MASK 0x000007fffffffff0UL
-#define UV1H_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST_NODE_ID_MASK 0x7ffe000000000000UL
-
-
 #define UV2H_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST_ADDRESS_SHFT 4
 #define UV2H_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST_NODE_ID_SHFT 49
 #define UV2H_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST_ADDRESS_MASK 0x000007fffffffff0UL
@@ -1880,13 +1564,6 @@ union uvh_ipi_int_u {
 
 union uvh_lb_bau_intd_payload_queue_first_u {
 	unsigned long	v;
-	struct uv1h_lb_bau_intd_payload_queue_first_s {
-		unsigned long	rsvd_0_3:4;
-		unsigned long	address:39;			/* RW */
-		unsigned long	rsvd_43_48:6;
-		unsigned long	node_id:14;			/* RW */
-		unsigned long	rsvd_63:1;
-	} s1;
 	struct uv2h_lb_bau_intd_payload_queue_first_s {
 		unsigned long	rsvd_0_3:4;
 		unsigned long	address:39;			/* RW */
@@ -1906,22 +1583,16 @@ union uvh_lb_bau_intd_payload_queue_first_u {
 /* ========================================================================= */
 /*                    UVH_LB_BAU_INTD_PAYLOAD_QUEUE_LAST                     */
 /* ========================================================================= */
-#define UV1H_LB_BAU_INTD_PAYLOAD_QUEUE_LAST 0x320060UL
 #define UV2H_LB_BAU_INTD_PAYLOAD_QUEUE_LAST 0x320060UL
 #define UV3H_LB_BAU_INTD_PAYLOAD_QUEUE_LAST 0x320060UL
 #define UV4H_LB_BAU_INTD_PAYLOAD_QUEUE_LAST uv_undefined("UV4H_LB_BAU_INTD_PAYLOAD_QUEUE_LAST")
 #define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_LAST (				\
-	is_uv1_hub() ? UV1H_LB_BAU_INTD_PAYLOAD_QUEUE_LAST :		\
 	is_uv2_hub() ? UV2H_LB_BAU_INTD_PAYLOAD_QUEUE_LAST :		\
 	is_uv3_hub() ? UV3H_LB_BAU_INTD_PAYLOAD_QUEUE_LAST :		\
 	/*is_uv4_hub*/ UV4H_LB_BAU_INTD_PAYLOAD_QUEUE_LAST)
 #define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_LAST_32 0x9c8
 
 
-#define UV1H_LB_BAU_INTD_PAYLOAD_QUEUE_LAST_ADDRESS_SHFT 4
-#define UV1H_LB_BAU_INTD_PAYLOAD_QUEUE_LAST_ADDRESS_MASK 0x000007fffffffff0UL
-
-
 #define UV2H_LB_BAU_INTD_PAYLOAD_QUEUE_LAST_ADDRESS_SHFT 4
 #define UV2H_LB_BAU_INTD_PAYLOAD_QUEUE_LAST_ADDRESS_MASK 0x000007fffffffff0UL
 
@@ -1931,11 +1602,6 @@ union uvh_lb_bau_intd_payload_queue_first_u {
 
 union uvh_lb_bau_intd_payload_queue_last_u {
 	unsigned long	v;
-	struct uv1h_lb_bau_intd_payload_queue_last_s {
-		unsigned long	rsvd_0_3:4;
-		unsigned long	address:39;			/* RW */
-		unsigned long	rsvd_43_63:21;
-	} s1;
 	struct uv2h_lb_bau_intd_payload_queue_last_s {
 		unsigned long	rsvd_0_3:4;
 		unsigned long	address:39;			/* RW */
@@ -1951,22 +1617,16 @@ union uvh_lb_bau_intd_payload_queue_last_u {
 /* ========================================================================= */
 /*                    UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL                     */
 /* ========================================================================= */
-#define UV1H_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL 0x320070UL
 #define UV2H_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL 0x320070UL
 #define UV3H_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL 0x320070UL
 #define UV4H_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL uv_undefined("UV4H_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL")
 #define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL (				\
-	is_uv1_hub() ? UV1H_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL :		\
 	is_uv2_hub() ? UV2H_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL :		\
 	is_uv3_hub() ? UV3H_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL :		\
 	/*is_uv4_hub*/ UV4H_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL)
 #define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL_32 0x9d0
 
 
-#define UV1H_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL_ADDRESS_SHFT 4
-#define UV1H_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL_ADDRESS_MASK 0x000007fffffffff0UL
-
-
 #define UV2H_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL_ADDRESS_SHFT 4
 #define UV2H_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL_ADDRESS_MASK 0x000007fffffffff0UL
 
@@ -1976,11 +1636,6 @@ union uvh_lb_bau_intd_payload_queue_last_u {
 
 union uvh_lb_bau_intd_payload_queue_tail_u {
 	unsigned long	v;
-	struct uv1h_lb_bau_intd_payload_queue_tail_s {
-		unsigned long	rsvd_0_3:4;
-		unsigned long	address:39;			/* RW */
-		unsigned long	rsvd_43_63:21;
-	} s1;
 	struct uv2h_lb_bau_intd_payload_queue_tail_s {
 		unsigned long	rsvd_0_3:4;
 		unsigned long	address:39;			/* RW */
@@ -1996,52 +1651,16 @@ union uvh_lb_bau_intd_payload_queue_tail_u {
 /* ========================================================================= */
 /*                   UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE                    */
 /* ========================================================================= */
-#define UV1H_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE 0x320080UL
 #define UV2H_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE 0x320080UL
 #define UV3H_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE 0x320080UL
 #define UV4H_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE uv_undefined("UV4H_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE")
 #define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE (				\
-	is_uv1_hub() ? UV1H_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE :		\
 	is_uv2_hub() ? UV2H_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE :		\
 	is_uv3_hub() ? UV3H_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE :		\
 	/*is_uv4_hub*/ UV4H_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE)
 #define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_32 0xa68
 
 
-#define UV1H_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_0_SHFT 0
-#define UV1H_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_1_SHFT 1
-#define UV1H_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_2_SHFT 2
-#define UV1H_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_3_SHFT 3
-#define UV1H_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_4_SHFT 4
-#define UV1H_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_5_SHFT 5
-#define UV1H_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_6_SHFT 6
-#define UV1H_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_7_SHFT 7
-#define UV1H_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_0_SHFT 8
-#define UV1H_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_1_SHFT 9
-#define UV1H_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_2_SHFT 10
-#define UV1H_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_3_SHFT 11
-#define UV1H_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_4_SHFT 12
-#define UV1H_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_5_SHFT 13
-#define UV1H_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_6_SHFT 14
-#define UV1H_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_7_SHFT 15
-#define UV1H_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_0_MASK 0x0000000000000001UL
-#define UV1H_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_1_MASK 0x0000000000000002UL
-#define UV1H_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_2_MASK 0x0000000000000004UL
-#define UV1H_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_3_MASK 0x0000000000000008UL
-#define UV1H_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_4_MASK 0x0000000000000010UL
-#define UV1H_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_5_MASK 0x0000000000000020UL
-#define UV1H_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_6_MASK 0x0000000000000040UL
-#define UV1H_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_7_MASK 0x0000000000000080UL
-#define UV1H_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_0_MASK 0x0000000000000100UL
-#define UV1H_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_1_MASK 0x0000000000000200UL
-#define UV1H_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_2_MASK 0x0000000000000400UL
-#define UV1H_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_3_MASK 0x0000000000000800UL
-#define UV1H_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_4_MASK 0x0000000000001000UL
-#define UV1H_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_5_MASK 0x0000000000002000UL
-#define UV1H_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_6_MASK 0x0000000000004000UL
-#define UV1H_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_7_MASK 0x0000000000008000UL
-
-
 #define UV2H_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_0_SHFT 0
 #define UV2H_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_1_SHFT 1
 #define UV2H_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_2_SHFT 2
@@ -2111,25 +1730,6 @@ union uvh_lb_bau_intd_payload_queue_tail_u {
 
 union uvh_lb_bau_intd_software_acknowledge_u {
 	unsigned long	v;
-	struct uv1h_lb_bau_intd_software_acknowledge_s {
-		unsigned long	pending_0:1;			/* RW, W1C */
-		unsigned long	pending_1:1;			/* RW, W1C */
-		unsigned long	pending_2:1;			/* RW, W1C */
-		unsigned long	pending_3:1;			/* RW, W1C */
-		unsigned long	pending_4:1;			/* RW, W1C */
-		unsigned long	pending_5:1;			/* RW, W1C */
-		unsigned long	pending_6:1;			/* RW, W1C */
-		unsigned long	pending_7:1;			/* RW, W1C */
-		unsigned long	timeout_0:1;			/* RW, W1C */
-		unsigned long	timeout_1:1;			/* RW, W1C */
-		unsigned long	timeout_2:1;			/* RW, W1C */
-		unsigned long	timeout_3:1;			/* RW, W1C */
-		unsigned long	timeout_4:1;			/* RW, W1C */
-		unsigned long	timeout_5:1;			/* RW, W1C */
-		unsigned long	timeout_6:1;			/* RW, W1C */
-		unsigned long	timeout_7:1;			/* RW, W1C */
-		unsigned long	rsvd_16_63:48;
-	} s1;
 	struct uv2h_lb_bau_intd_software_acknowledge_s {
 		unsigned long	pending_0:1;			/* RW */
 		unsigned long	pending_1:1;			/* RW */
@@ -2173,12 +1773,10 @@ union uvh_lb_bau_intd_software_acknowledge_u {
 /* ========================================================================= */
 /*                UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS                 */
 /* ========================================================================= */
-#define UV1H_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS 0x320088UL
 #define UV2H_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS 0x320088UL
 #define UV3H_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS 0x320088UL
 #define UV4H_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS uv_undefined("UV4H_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS")
 #define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS (			\
-	is_uv1_hub() ? UV1H_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS :	\
 	is_uv2_hub() ? UV2H_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS :	\
 	is_uv3_hub() ? UV3H_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS :	\
 	/*is_uv4_hub*/ UV4H_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS)
@@ -2188,22 +1786,18 @@ union uvh_lb_bau_intd_software_acknowledge_u {
 /* ========================================================================= */
 /*                         UVH_LB_BAU_MISC_CONTROL                           */
 /* ========================================================================= */
-#define UV1H_LB_BAU_MISC_CONTROL 0x320170UL
 #define UV2H_LB_BAU_MISC_CONTROL 0x320170UL
 #define UV3H_LB_BAU_MISC_CONTROL 0x320170UL
 #define UV4H_LB_BAU_MISC_CONTROL 0xc8170UL
 #define UVH_LB_BAU_MISC_CONTROL (					\
-	is_uv1_hub() ? UV1H_LB_BAU_MISC_CONTROL :			\
 	is_uv2_hub() ? UV2H_LB_BAU_MISC_CONTROL :			\
 	is_uv3_hub() ? UV3H_LB_BAU_MISC_CONTROL :			\
 	/*is_uv4_hub*/ UV4H_LB_BAU_MISC_CONTROL)
 
-#define UV1H_LB_BAU_MISC_CONTROL_32 0xa10
 #define UV2H_LB_BAU_MISC_CONTROL_32 0xa10
 #define UV3H_LB_BAU_MISC_CONTROL_32 0xa10
 #define UV4H_LB_BAU_MISC_CONTROL_32 0xa18
 #define UVH_LB_BAU_MISC_CONTROL_32 (					\
-	is_uv1_hub() ? UV1H_LB_BAU_MISC_CONTROL_32 :			\
 	is_uv2_hub() ? UV2H_LB_BAU_MISC_CONTROL_32 :			\
 	is_uv3_hub() ? UV3H_LB_BAU_MISC_CONTROL_32 :			\
 	/*is_uv4_hub*/ UV4H_LB_BAU_MISC_CONTROL_32)
@@ -2237,39 +1831,6 @@ union uvh_lb_bau_intd_software_acknowledge_u {
 #define UVH_LB_BAU_MISC_CONTROL_ENABLE_PROGRAMMED_INITIAL_PRIORITY_MASK 0x0000000010000000UL
 #define UVH_LB_BAU_MISC_CONTROL_FUN_MASK		0xffff000000000000UL
 
-#define UV1H_LB_BAU_MISC_CONTROL_REJECTION_DELAY_SHFT	0
-#define UV1H_LB_BAU_MISC_CONTROL_APIC_MODE_SHFT		8
-#define UV1H_LB_BAU_MISC_CONTROL_FORCE_BROADCAST_SHFT	9
-#define UV1H_LB_BAU_MISC_CONTROL_FORCE_LOCK_NOP_SHFT	10
-#define UV1H_LB_BAU_MISC_CONTROL_QPI_AGENT_PRESENCE_VECTOR_SHFT 11
-#define UV1H_LB_BAU_MISC_CONTROL_DESCRIPTOR_FETCH_MODE_SHFT 14
-#define UV1H_LB_BAU_MISC_CONTROL_ENABLE_INTD_SOFT_ACK_MODE_SHFT 15
-#define UV1H_LB_BAU_MISC_CONTROL_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHFT 16
-#define UV1H_LB_BAU_MISC_CONTROL_ENABLE_DUAL_MAPPING_MODE_SHFT 20
-#define UV1H_LB_BAU_MISC_CONTROL_VGA_IO_PORT_DECODE_ENABLE_SHFT 21
-#define UV1H_LB_BAU_MISC_CONTROL_VGA_IO_PORT_16_BIT_DECODE_SHFT 22
-#define UV1H_LB_BAU_MISC_CONTROL_SUPPRESS_DEST_REGISTRATION_SHFT 23
-#define UV1H_LB_BAU_MISC_CONTROL_PROGRAMMED_INITIAL_PRIORITY_SHFT 24
-#define UV1H_LB_BAU_MISC_CONTROL_USE_INCOMING_PRIORITY_SHFT 27
-#define UV1H_LB_BAU_MISC_CONTROL_ENABLE_PROGRAMMED_INITIAL_PRIORITY_SHFT 28
-#define UV1H_LB_BAU_MISC_CONTROL_FUN_SHFT		48
-#define UV1H_LB_BAU_MISC_CONTROL_REJECTION_DELAY_MASK	0x00000000000000ffUL
-#define UV1H_LB_BAU_MISC_CONTROL_APIC_MODE_MASK		0x0000000000000100UL
-#define UV1H_LB_BAU_MISC_CONTROL_FORCE_BROADCAST_MASK	0x0000000000000200UL
-#define UV1H_LB_BAU_MISC_CONTROL_FORCE_LOCK_NOP_MASK	0x0000000000000400UL
-#define UV1H_LB_BAU_MISC_CONTROL_QPI_AGENT_PRESENCE_VECTOR_MASK 0x0000000000003800UL
-#define UV1H_LB_BAU_MISC_CONTROL_DESCRIPTOR_FETCH_MODE_MASK 0x0000000000004000UL
-#define UV1H_LB_BAU_MISC_CONTROL_ENABLE_INTD_SOFT_ACK_MODE_MASK 0x0000000000008000UL
-#define UV1H_LB_BAU_MISC_CONTROL_INTD_SOFT_ACK_TIMEOUT_PERIOD_MASK 0x00000000000f0000UL
-#define UV1H_LB_BAU_MISC_CONTROL_ENABLE_DUAL_MAPPING_MODE_MASK 0x0000000000100000UL
-#define UV1H_LB_BAU_MISC_CONTROL_VGA_IO_PORT_DECODE_ENABLE_MASK 0x0000000000200000UL
-#define UV1H_LB_BAU_MISC_CONTROL_VGA_IO_PORT_16_BIT_DECODE_MASK 0x0000000000400000UL
-#define UV1H_LB_BAU_MISC_CONTROL_SUPPRESS_DEST_REGISTRATION_MASK 0x0000000000800000UL
-#define UV1H_LB_BAU_MISC_CONTROL_PROGRAMMED_INITIAL_PRIORITY_MASK 0x0000000007000000UL
-#define UV1H_LB_BAU_MISC_CONTROL_USE_INCOMING_PRIORITY_MASK 0x0000000008000000UL
-#define UV1H_LB_BAU_MISC_CONTROL_ENABLE_PROGRAMMED_INITIAL_PRIORITY_MASK 0x0000000010000000UL
-#define UV1H_LB_BAU_MISC_CONTROL_FUN_MASK		0xffff000000000000UL
-
 #define UVXH_LB_BAU_MISC_CONTROL_REJECTION_DELAY_SHFT	0
 #define UVXH_LB_BAU_MISC_CONTROL_APIC_MODE_SHFT		8
 #define UVXH_LB_BAU_MISC_CONTROL_FORCE_BROADCAST_SHFT	9
@@ -2469,28 +2030,24 @@ union uvh_lb_bau_intd_software_acknowledge_u {
 #define UV4H_LB_BAU_MISC_CONTROL_ENABLE_INTD_SOFT_ACK_MODE_MASK	\
 	uv_undefined("UV4H_LB_BAU_MISC_CONTROL_ENABLE_INTD_SOFT_ACK_MODE_MASK")
 #define UVH_LB_BAU_MISC_CONTROL_ENABLE_INTD_SOFT_ACK_MODE_MASK (	\
-	is_uv1_hub() ? UV1H_LB_BAU_MISC_CONTROL_ENABLE_INTD_SOFT_ACK_MODE_MASK : \
 	is_uv2_hub() ? UV2H_LB_BAU_MISC_CONTROL_ENABLE_INTD_SOFT_ACK_MODE_MASK : \
 	is_uv3_hub() ? UV3H_LB_BAU_MISC_CONTROL_ENABLE_INTD_SOFT_ACK_MODE_MASK : \
 	/*is_uv4_hub*/ UV4H_LB_BAU_MISC_CONTROL_ENABLE_INTD_SOFT_ACK_MODE_MASK)
 #define UV4H_LB_BAU_MISC_CONTROL_ENABLE_INTD_SOFT_ACK_MODE_SHFT	\
 	uv_undefined("UV4H_LB_BAU_MISC_CONTROL_ENABLE_INTD_SOFT_ACK_MODE_SHFT")
 #define UVH_LB_BAU_MISC_CONTROL_ENABLE_INTD_SOFT_ACK_MODE_SHFT (	\
-	is_uv1_hub() ? UV1H_LB_BAU_MISC_CONTROL_ENABLE_INTD_SOFT_ACK_MODE_SHFT : \
 	is_uv2_hub() ? UV2H_LB_BAU_MISC_CONTROL_ENABLE_INTD_SOFT_ACK_MODE_SHFT : \
 	is_uv3_hub() ? UV3H_LB_BAU_MISC_CONTROL_ENABLE_INTD_SOFT_ACK_MODE_SHFT : \
 	/*is_uv4_hub*/ UV4H_LB_BAU_MISC_CONTROL_ENABLE_INTD_SOFT_ACK_MODE_SHFT)
 #define UV4H_LB_BAU_MISC_CONTROL_INTD_SOFT_ACK_TIMEOUT_PERIOD_MASK	\
 	uv_undefined("UV4H_LB_BAU_MISC_CONTROL_INTD_SOFT_ACK_TIMEOUT_PERIOD_MASK")
 #define UVH_LB_BAU_MISC_CONTROL_INTD_SOFT_ACK_TIMEOUT_PERIOD_MASK (	\
-	is_uv1_hub() ? UV1H_LB_BAU_MISC_CONTROL_INTD_SOFT_ACK_TIMEOUT_PERIOD_MASK : \
 	is_uv2_hub() ? UV2H_LB_BAU_MISC_CONTROL_INTD_SOFT_ACK_TIMEOUT_PERIOD_MASK : \
 	is_uv3_hub() ? UV3H_LB_BAU_MISC_CONTROL_INTD_SOFT_ACK_TIMEOUT_PERIOD_MASK : \
 	/*is_uv4_hub*/ UV4H_LB_BAU_MISC_CONTROL_INTD_SOFT_ACK_TIMEOUT_PERIOD_MASK)
 #define UV4H_LB_BAU_MISC_CONTROL_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHFT	\
 	uv_undefined("UV4H_LB_BAU_MISC_CONTROL_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHFT")
 #define UVH_LB_BAU_MISC_CONTROL_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHFT (	\
-	is_uv1_hub() ? UV1H_LB_BAU_MISC_CONTROL_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHFT : \
 	is_uv2_hub() ? UV2H_LB_BAU_MISC_CONTROL_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHFT : \
 	is_uv3_hub() ? UV3H_LB_BAU_MISC_CONTROL_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHFT : \
 	/*is_uv4_hub*/ UV4H_LB_BAU_MISC_CONTROL_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHFT)
@@ -2515,25 +2072,6 @@ union uvh_lb_bau_misc_control_u {
 		unsigned long	rsvd_29_47:19;
 		unsigned long	fun:16;				/* RW */
 	} s;
-	struct uv1h_lb_bau_misc_control_s {
-		unsigned long	rejection_delay:8;		/* RW */
-		unsigned long	apic_mode:1;			/* RW */
-		unsigned long	force_broadcast:1;		/* RW */
-		unsigned long	force_lock_nop:1;		/* RW */
-		unsigned long	qpi_agent_presence_vector:3;	/* RW */
-		unsigned long	descriptor_fetch_mode:1;	/* RW */
-		unsigned long	enable_intd_soft_ack_mode:1;	/* RW */
-		unsigned long	intd_soft_ack_timeout_period:4;	/* RW */
-		unsigned long	enable_dual_mapping_mode:1;	/* RW */
-		unsigned long	vga_io_port_decode_enable:1;	/* RW */
-		unsigned long	vga_io_port_16_bit_decode:1;	/* RW */
-		unsigned long	suppress_dest_registration:1;	/* RW */
-		unsigned long	programmed_initial_priority:3;	/* RW */
-		unsigned long	use_incoming_priority:1;	/* RW */
-		unsigned long	enable_programmed_initial_priority:1;/* RW */
-		unsigned long	rsvd_29_47:19;
-		unsigned long	fun:16;				/* RW */
-	} s1;
 	struct uvxh_lb_bau_misc_control_s {
 		unsigned long	rejection_delay:8;		/* RW */
 		unsigned long	apic_mode:1;			/* RW */
@@ -2648,22 +2186,18 @@ union uvh_lb_bau_misc_control_u {
 /* ========================================================================= */
 /*                     UVH_LB_BAU_SB_ACTIVATION_CONTROL                      */
 /* ========================================================================= */
-#define UV1H_LB_BAU_SB_ACTIVATION_CONTROL 0x320020UL
 #define UV2H_LB_BAU_SB_ACTIVATION_CONTROL 0x320020UL
 #define UV3H_LB_BAU_SB_ACTIVATION_CONTROL 0x320020UL
 #define UV4H_LB_BAU_SB_ACTIVATION_CONTROL 0xc8020UL
 #define UVH_LB_BAU_SB_ACTIVATION_CONTROL (				\
-	is_uv1_hub() ? UV1H_LB_BAU_SB_ACTIVATION_CONTROL :		\
 	is_uv2_hub() ? UV2H_LB_BAU_SB_ACTIVATION_CONTROL :		\
 	is_uv3_hub() ? UV3H_LB_BAU_SB_ACTIVATION_CONTROL :		\
 	/*is_uv4_hub*/ UV4H_LB_BAU_SB_ACTIVATION_CONTROL)
 
-#define UV1H_LB_BAU_SB_ACTIVATION_CONTROL_32 0x9a8
 #define UV2H_LB_BAU_SB_ACTIVATION_CONTROL_32 0x9a8
 #define UV3H_LB_BAU_SB_ACTIVATION_CONTROL_32 0x9a8
 #define UV4H_LB_BAU_SB_ACTIVATION_CONTROL_32 0x9c8
 #define UVH_LB_BAU_SB_ACTIVATION_CONTROL_32 (				\
-	is_uv1_hub() ? UV1H_LB_BAU_SB_ACTIVATION_CONTROL_32 :		\
 	is_uv2_hub() ? UV2H_LB_BAU_SB_ACTIVATION_CONTROL_32 :		\
 	is_uv3_hub() ? UV3H_LB_BAU_SB_ACTIVATION_CONTROL_32 :		\
 	/*is_uv4_hub*/ UV4H_LB_BAU_SB_ACTIVATION_CONTROL_32)
@@ -2689,22 +2223,18 @@ union uvh_lb_bau_sb_activation_control_u {
 /* ========================================================================= */
 /*                    UVH_LB_BAU_SB_ACTIVATION_STATUS_0                      */
 /* ========================================================================= */
-#define UV1H_LB_BAU_SB_ACTIVATION_STATUS_0 0x320030UL
 #define UV2H_LB_BAU_SB_ACTIVATION_STATUS_0 0x320030UL
 #define UV3H_LB_BAU_SB_ACTIVATION_STATUS_0 0x320030UL
 #define UV4H_LB_BAU_SB_ACTIVATION_STATUS_0 0xc8030UL
 #define UVH_LB_BAU_SB_ACTIVATION_STATUS_0 (				\
-	is_uv1_hub() ? UV1H_LB_BAU_SB_ACTIVATION_STATUS_0 :		\
 	is_uv2_hub() ? UV2H_LB_BAU_SB_ACTIVATION_STATUS_0 :		\
 	is_uv3_hub() ? UV3H_LB_BAU_SB_ACTIVATION_STATUS_0 :		\
 	/*is_uv4_hub*/ UV4H_LB_BAU_SB_ACTIVATION_STATUS_0)
 
-#define UV1H_LB_BAU_SB_ACTIVATION_STATUS_0_32 0x9b0
 #define UV2H_LB_BAU_SB_ACTIVATION_STATUS_0_32 0x9b0
 #define UV3H_LB_BAU_SB_ACTIVATION_STATUS_0_32 0x9b0
 #define UV4H_LB_BAU_SB_ACTIVATION_STATUS_0_32 0x9d0
 #define UVH_LB_BAU_SB_ACTIVATION_STATUS_0_32 (				\
-	is_uv1_hub() ? UV1H_LB_BAU_SB_ACTIVATION_STATUS_0_32 :		\
 	is_uv2_hub() ? UV2H_LB_BAU_SB_ACTIVATION_STATUS_0_32 :		\
 	is_uv3_hub() ? UV3H_LB_BAU_SB_ACTIVATION_STATUS_0_32 :		\
 	/*is_uv4_hub*/ UV4H_LB_BAU_SB_ACTIVATION_STATUS_0_32)
@@ -2723,22 +2253,18 @@ union uvh_lb_bau_sb_activation_status_0_u {
 /* ========================================================================= */
 /*                    UVH_LB_BAU_SB_ACTIVATION_STATUS_1                      */
 /* ========================================================================= */
-#define UV1H_LB_BAU_SB_ACTIVATION_STATUS_1 0x320040UL
 #define UV2H_LB_BAU_SB_ACTIVATION_STATUS_1 0x320040UL
 #define UV3H_LB_BAU_SB_ACTIVATION_STATUS_1 0x320040UL
 #define UV4H_LB_BAU_SB_ACTIVATION_STATUS_1 0xc8040UL
 #define UVH_LB_BAU_SB_ACTIVATION_STATUS_1 (				\
-	is_uv1_hub() ? UV1H_LB_BAU_SB_ACTIVATION_STATUS_1 :		\
 	is_uv2_hub() ? UV2H_LB_BAU_SB_ACTIVATION_STATUS_1 :		\
 	is_uv3_hub() ? UV3H_LB_BAU_SB_ACTIVATION_STATUS_1 :		\
 	/*is_uv4_hub*/ UV4H_LB_BAU_SB_ACTIVATION_STATUS_1)
 
-#define UV1H_LB_BAU_SB_ACTIVATION_STATUS_1_32 0x9b8
 #define UV2H_LB_BAU_SB_ACTIVATION_STATUS_1_32 0x9b8
 #define UV3H_LB_BAU_SB_ACTIVATION_STATUS_1_32 0x9b8
 #define UV4H_LB_BAU_SB_ACTIVATION_STATUS_1_32 0x9d8
 #define UVH_LB_BAU_SB_ACTIVATION_STATUS_1_32 (				\
-	is_uv1_hub() ? UV1H_LB_BAU_SB_ACTIVATION_STATUS_1_32 :		\
 	is_uv2_hub() ? UV2H_LB_BAU_SB_ACTIVATION_STATUS_1_32 :		\
 	is_uv3_hub() ? UV3H_LB_BAU_SB_ACTIVATION_STATUS_1_32 :		\
 	/*is_uv4_hub*/ UV4H_LB_BAU_SB_ACTIVATION_STATUS_1_32)
@@ -2757,32 +2283,24 @@ union uvh_lb_bau_sb_activation_status_1_u {
 /* ========================================================================= */
 /*                      UVH_LB_BAU_SB_DESCRIPTOR_BASE                        */
 /* ========================================================================= */
-#define UV1H_LB_BAU_SB_DESCRIPTOR_BASE 0x320010UL
 #define UV2H_LB_BAU_SB_DESCRIPTOR_BASE 0x320010UL
 #define UV3H_LB_BAU_SB_DESCRIPTOR_BASE 0x320010UL
 #define UV4H_LB_BAU_SB_DESCRIPTOR_BASE 0xc8010UL
 #define UVH_LB_BAU_SB_DESCRIPTOR_BASE (					\
-	is_uv1_hub() ? UV1H_LB_BAU_SB_DESCRIPTOR_BASE :			\
 	is_uv2_hub() ? UV2H_LB_BAU_SB_DESCRIPTOR_BASE :			\
 	is_uv3_hub() ? UV3H_LB_BAU_SB_DESCRIPTOR_BASE :			\
 	/*is_uv4_hub*/ UV4H_LB_BAU_SB_DESCRIPTOR_BASE)
 
-#define UV1H_LB_BAU_SB_DESCRIPTOR_BASE_32 0x9a0
 #define UV2H_LB_BAU_SB_DESCRIPTOR_BASE_32 0x9a0
 #define UV3H_LB_BAU_SB_DESCRIPTOR_BASE_32 0x9a0
 #define UV4H_LB_BAU_SB_DESCRIPTOR_BASE_32 0x9c0
 #define UVH_LB_BAU_SB_DESCRIPTOR_BASE_32 (				\
-	is_uv1_hub() ? UV1H_LB_BAU_SB_DESCRIPTOR_BASE_32 :		\
 	is_uv2_hub() ? UV2H_LB_BAU_SB_DESCRIPTOR_BASE_32 :		\
 	is_uv3_hub() ? UV3H_LB_BAU_SB_DESCRIPTOR_BASE_32 :		\
 	/*is_uv4_hub*/ UV4H_LB_BAU_SB_DESCRIPTOR_BASE_32)
 
 #define UVH_LB_BAU_SB_DESCRIPTOR_BASE_PAGE_ADDRESS_SHFT	12
 
-#define UV1H_LB_BAU_SB_DESCRIPTOR_BASE_NODE_ID_SHFT	49
-#define UV1H_LB_BAU_SB_DESCRIPTOR_BASE_PAGE_ADDRESS_MASK 0x000007fffffff000UL
-#define UV1H_LB_BAU_SB_DESCRIPTOR_BASE_NODE_ID_MASK	0x7ffe000000000000UL
-
 #define UV2H_LB_BAU_SB_DESCRIPTOR_BASE_NODE_ID_SHFT	49
 #define UV2H_LB_BAU_SB_DESCRIPTOR_BASE_PAGE_ADDRESS_MASK 0x000007fffffff000UL
 #define UV2H_LB_BAU_SB_DESCRIPTOR_BASE_NODE_ID_MASK	0x7ffe000000000000UL
@@ -2800,21 +2318,18 @@ union uvh_lb_bau_sb_activation_status_1_u {
 #define UV4AH_LB_BAU_SB_DESCRIPTOR_BASE_NODE_ID_MASK	0xffe0000000000000UL
 
 #define UVH_LB_BAU_SB_DESCRIPTOR_BASE_NODE_ID_SHFT (			\
-	is_uv1_hub() ? UV1H_LB_BAU_SB_DESCRIPTOR_BASE_NODE_ID_SHFT :	\
 	is_uv2_hub() ? UV2H_LB_BAU_SB_DESCRIPTOR_BASE_NODE_ID_SHFT :	\
 	is_uv3_hub() ? UV3H_LB_BAU_SB_DESCRIPTOR_BASE_NODE_ID_SHFT :	\
 	is_uv4a_hub() ? UV4AH_LB_BAU_SB_DESCRIPTOR_BASE_NODE_ID_SHFT :	\
 	/*is_uv4_hub*/ UV4H_LB_BAU_SB_DESCRIPTOR_BASE_NODE_ID_SHFT)
 
 #define UVH_LB_BAU_SB_DESCRIPTOR_PAGE_ADDRESS_MASK (			\
-	is_uv1_hub() ? UV1H_LB_BAU_SB_DESCRIPTOR_PAGE_ADDRESS_MASK :	\
 	is_uv2_hub() ? UV2H_LB_BAU_SB_DESCRIPTOR_PAGE_ADDRESS_MASK :	\
 	is_uv3_hub() ? UV3H_LB_BAU_SB_DESCRIPTOR_PAGE_ADDRESS_MASK :	\
 	is_uv4a_hub() ? UV4AH_LB_BAU_SB_DESCRIPTOR_PAGE_ADDRESS_MASK :	\
 	/*is_uv4_hub*/ UV4H_LB_BAU_SB_DESCRIPTOR_PAGE_ADDRESS_MASK)
 
 #define UVH_LB_BAU_SB_DESCRIPTOR_BASE_NODE_ID_MASK (			\
-	is_uv1_hub() ? UV1H_LB_BAU_SB_DESCRIPTOR_BASE_NODE_ID_MASK :	\
 	is_uv2_hub() ? UV2H_LB_BAU_SB_DESCRIPTOR_BASE_NODE_ID_MASK :	\
 	is_uv3_hub() ? UV3H_LB_BAU_SB_DESCRIPTOR_BASE_NODE_ID_MASK :	\
 	is_uv4a_hub() ? UV4AH_LB_BAU_SB_DESCRIPTOR_BASE_NODE_ID_MASK :	\
@@ -2824,7 +2339,6 @@ union uvh_lb_bau_sb_activation_status_1_u {
 /*                               UVH_NODE_ID                                 */
 /* ========================================================================= */
 #define UVH_NODE_ID 0x0UL
-#define UV1H_NODE_ID 0x0UL
 #define UV2H_NODE_ID 0x0UL
 #define UV3H_NODE_ID 0x0UL
 #define UV4H_NODE_ID 0x0UL
@@ -2840,21 +2354,6 @@ union uvh_lb_bau_sb_activation_status_1_u {
 #define UVH_NODE_ID_REVISION_MASK			0x00000000f0000000UL
 #define UVH_NODE_ID_NODE_ID_MASK			0x00007fff00000000UL
 
-#define UV1H_NODE_ID_FORCE1_SHFT			0
-#define UV1H_NODE_ID_MANUFACTURER_SHFT			1
-#define UV1H_NODE_ID_PART_NUMBER_SHFT			12
-#define UV1H_NODE_ID_REVISION_SHFT			28
-#define UV1H_NODE_ID_NODE_ID_SHFT			32
-#define UV1H_NODE_ID_NODES_PER_BIT_SHFT			48
-#define UV1H_NODE_ID_NI_PORT_SHFT			56
-#define UV1H_NODE_ID_FORCE1_MASK			0x0000000000000001UL
-#define UV1H_NODE_ID_MANUFACTURER_MASK			0x0000000000000ffeUL
-#define UV1H_NODE_ID_PART_NUMBER_MASK			0x000000000ffff000UL
-#define UV1H_NODE_ID_REVISION_MASK			0x00000000f0000000UL
-#define UV1H_NODE_ID_NODE_ID_MASK			0x00007fff00000000UL
-#define UV1H_NODE_ID_NODES_PER_BIT_MASK			0x007f000000000000UL
-#define UV1H_NODE_ID_NI_PORT_MASK			0x0f00000000000000UL
-
 #define UVXH_NODE_ID_FORCE1_SHFT			0
 #define UVXH_NODE_ID_MANUFACTURER_SHFT			1
 #define UVXH_NODE_ID_PART_NUMBER_SHFT			12
@@ -2934,18 +2433,6 @@ union uvh_node_id_u {
 		unsigned long	node_id:15;			/* RW */
 		unsigned long	rsvd_47_63:17;
 	} s;
-	struct uv1h_node_id_s {
-		unsigned long	force1:1;			/* RO */
-		unsigned long	manufacturer:11;		/* RO */
-		unsigned long	part_number:16;			/* RO */
-		unsigned long	revision:4;			/* RO */
-		unsigned long	node_id:15;			/* RW */
-		unsigned long	rsvd_47:1;
-		unsigned long	nodes_per_bit:7;		/* RW */
-		unsigned long	rsvd_55:1;
-		unsigned long	ni_port:4;			/* RO */
-		unsigned long	rsvd_60_63:4;
-	} s1;
 	struct uvxh_node_id_s {
 		unsigned long	force1:1;			/* RO */
 		unsigned long	manufacturer:11;		/* RO */
@@ -3001,12 +2488,10 @@ union uvh_node_id_u {
 /* ========================================================================= */
 #define UVH_NODE_PRESENT_TABLE 0x1400UL
 
-#define UV1H_NODE_PRESENT_TABLE_DEPTH 16
 #define UV2H_NODE_PRESENT_TABLE_DEPTH 16
 #define UV3H_NODE_PRESENT_TABLE_DEPTH 16
 #define UV4H_NODE_PRESENT_TABLE_DEPTH 4
 #define UVH_NODE_PRESENT_TABLE_DEPTH (					\
-	is_uv1_hub() ? UV1H_NODE_PRESENT_TABLE_DEPTH :			\
 	is_uv2_hub() ? UV2H_NODE_PRESENT_TABLE_DEPTH :			\
 	is_uv3_hub() ? UV3H_NODE_PRESENT_TABLE_DEPTH :			\
 	/*is_uv4_hub*/ UV4H_NODE_PRESENT_TABLE_DEPTH)
@@ -3025,12 +2510,10 @@ union uvh_node_present_table_u {
 /* ========================================================================= */
 /*                 UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR                  */
 /* ========================================================================= */
-#define UV1H_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR 0x16000c8UL
 #define UV2H_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR 0x16000c8UL
 #define UV3H_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR 0x16000c8UL
 #define UV4H_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR 0x4800c8UL
 #define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR (			\
-	is_uv1_hub() ? UV1H_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR :	\
 	is_uv2_hub() ? UV2H_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR :	\
 	is_uv3_hub() ? UV3H_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR :	\
 	/*is_uv4_hub*/ UV4H_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR)
@@ -3042,13 +2525,6 @@ union uvh_node_present_table_u {
 #define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_M_ALIAS_MASK 0x001f000000000000UL
 #define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_ENABLE_MASK 0x8000000000000000UL
 
-#define UV1H_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_BASE_SHFT 24
-#define UV1H_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_M_ALIAS_SHFT 48
-#define UV1H_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_ENABLE_SHFT 63
-#define UV1H_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_BASE_MASK 0x00000000ff000000UL
-#define UV1H_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_M_ALIAS_MASK 0x001f000000000000UL
-#define UV1H_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_ENABLE_MASK 0x8000000000000000UL
-
 #define UVXH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_BASE_SHFT 24
 #define UVXH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_M_ALIAS_SHFT 48
 #define UVXH_RH_GAM_ALIAS210_OVERLAY_CONFIG_0_MMR_ENABLE_SHFT 63
@@ -3088,14 +2564,6 @@ union uvh_rh_gam_alias210_overlay_config_0_mmr_u {
 		unsigned long	rsvd_53_62:10;
 		unsigned long	enable:1;			/* RW */
 	} s;
-	struct uv1h_rh_gam_alias210_overlay_config_0_mmr_s {
-		unsigned long	rsvd_0_23:24;
-		unsigned long	base:8;				/* RW */
-		unsigned long	rsvd_32_47:16;
-		unsigned long	m_alias:5;			/* RW */
-		unsigned long	rsvd_53_62:10;
-		unsigned long	enable:1;			/* RW */
-	} s1;
 	struct uvxh_rh_gam_alias210_overlay_config_0_mmr_s {
 		unsigned long	rsvd_0_23:24;
 		unsigned long	base:8;				/* RW */
@@ -3133,12 +2601,10 @@ union uvh_rh_gam_alias210_overlay_config_0_mmr_u {
 /* ========================================================================= */
 /*                 UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR                  */
 /* ========================================================================= */
-#define UV1H_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR 0x16000d8UL
 #define UV2H_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR 0x16000d8UL
 #define UV3H_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR 0x16000d8UL
 #define UV4H_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR 0x4800d8UL
 #define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR (			\
-	is_uv1_hub() ? UV1H_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR :	\
 	is_uv2_hub() ? UV2H_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR :	\
 	is_uv3_hub() ? UV3H_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR :	\
 	/*is_uv4_hub*/ UV4H_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR)
@@ -3150,13 +2616,6 @@ union uvh_rh_gam_alias210_overlay_config_0_mmr_u {
 #define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_M_ALIAS_MASK 0x001f000000000000UL
 #define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_ENABLE_MASK 0x8000000000000000UL
 
-#define UV1H_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_BASE_SHFT 24
-#define UV1H_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_M_ALIAS_SHFT 48
-#define UV1H_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_ENABLE_SHFT 63
-#define UV1H_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_BASE_MASK 0x00000000ff000000UL
-#define UV1H_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_M_ALIAS_MASK 0x001f000000000000UL
-#define UV1H_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_ENABLE_MASK 0x8000000000000000UL
-
 #define UVXH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_BASE_SHFT 24
 #define UVXH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_M_ALIAS_SHFT 48
 #define UVXH_RH_GAM_ALIAS210_OVERLAY_CONFIG_1_MMR_ENABLE_SHFT 63
@@ -3196,14 +2655,6 @@ union uvh_rh_gam_alias210_overlay_config_1_mmr_u {
 		unsigned long	rsvd_53_62:10;
 		unsigned long	enable:1;			/* RW */
 	} s;
-	struct uv1h_rh_gam_alias210_overlay_config_1_mmr_s {
-		unsigned long	rsvd_0_23:24;
-		unsigned long	base:8;				/* RW */
-		unsigned long	rsvd_32_47:16;
-		unsigned long	m_alias:5;			/* RW */
-		unsigned long	rsvd_53_62:10;
-		unsigned long	enable:1;			/* RW */
-	} s1;
 	struct uvxh_rh_gam_alias210_overlay_config_1_mmr_s {
 		unsigned long	rsvd_0_23:24;
 		unsigned long	base:8;				/* RW */
@@ -3241,12 +2692,10 @@ union uvh_rh_gam_alias210_overlay_config_1_mmr_u {
 /* ========================================================================= */
 /*                 UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR                  */
 /* ========================================================================= */
-#define UV1H_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR 0x16000e8UL
 #define UV2H_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR 0x16000e8UL
 #define UV3H_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR 0x16000e8UL
 #define UV4H_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR 0x4800e8UL
 #define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR (			\
-	is_uv1_hub() ? UV1H_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR :	\
 	is_uv2_hub() ? UV2H_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR :	\
 	is_uv3_hub() ? UV3H_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR :	\
 	/*is_uv4_hub*/ UV4H_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR)
@@ -3258,13 +2707,6 @@ union uvh_rh_gam_alias210_overlay_config_1_mmr_u {
 #define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_M_ALIAS_MASK 0x001f000000000000UL
 #define UVH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_ENABLE_MASK 0x8000000000000000UL
 
-#define UV1H_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_BASE_SHFT 24
-#define UV1H_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_M_ALIAS_SHFT 48
-#define UV1H_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_ENABLE_SHFT 63
-#define UV1H_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_BASE_MASK 0x00000000ff000000UL
-#define UV1H_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_M_ALIAS_MASK 0x001f000000000000UL
-#define UV1H_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_ENABLE_MASK 0x8000000000000000UL
-
 #define UVXH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_BASE_SHFT 24
 #define UVXH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_M_ALIAS_SHFT 48
 #define UVXH_RH_GAM_ALIAS210_OVERLAY_CONFIG_2_MMR_ENABLE_SHFT 63
@@ -3304,14 +2746,6 @@ union uvh_rh_gam_alias210_overlay_config_2_mmr_u {
 		unsigned long	rsvd_53_62:10;
 		unsigned long	enable:1;			/* RW */
 	} s;
-	struct uv1h_rh_gam_alias210_overlay_config_2_mmr_s {
-		unsigned long	rsvd_0_23:24;
-		unsigned long	base:8;				/* RW */
-		unsigned long	rsvd_32_47:16;
-		unsigned long	m_alias:5;			/* RW */
-		unsigned long	rsvd_53_62:10;
-		unsigned long	enable:1;			/* RW */
-	} s1;
 	struct uvxh_rh_gam_alias210_overlay_config_2_mmr_s {
 		unsigned long	rsvd_0_23:24;
 		unsigned long	base:8;				/* RW */
@@ -3349,12 +2783,10 @@ union uvh_rh_gam_alias210_overlay_config_2_mmr_u {
 /* ========================================================================= */
 /*                UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR                  */
 /* ========================================================================= */
-#define UV1H_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR 0x16000d0UL
 #define UV2H_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR 0x16000d0UL
 #define UV3H_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR 0x16000d0UL
 #define UV4H_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR 0x4800d0UL
 #define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR (			\
-	is_uv1_hub() ? UV1H_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR :	\
 	is_uv2_hub() ? UV2H_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR :	\
 	is_uv3_hub() ? UV3H_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR :	\
 	/*is_uv4_hub*/ UV4H_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR)
@@ -3362,9 +2794,6 @@ union uvh_rh_gam_alias210_overlay_config_2_mmr_u {
 #define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR_DEST_BASE_SHFT 24
 #define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR_DEST_BASE_MASK 0x00003fffff000000UL
 
-#define UV1H_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR_DEST_BASE_SHFT 24
-#define UV1H_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR_DEST_BASE_MASK 0x00003fffff000000UL
-
 #define UVXH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR_DEST_BASE_SHFT 24
 #define UVXH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR_DEST_BASE_MASK 0x00003fffff000000UL
 
@@ -3385,11 +2814,6 @@ union uvh_rh_gam_alias210_redirect_config_0_mmr_u {
 		unsigned long	dest_base:22;			/* RW */
 		unsigned long	rsvd_46_63:18;
 	} s;
-	struct uv1h_rh_gam_alias210_redirect_config_0_mmr_s {
-		unsigned long	rsvd_0_23:24;
-		unsigned long	dest_base:22;			/* RW */
-		unsigned long	rsvd_46_63:18;
-	} s1;
 	struct uvxh_rh_gam_alias210_redirect_config_0_mmr_s {
 		unsigned long	rsvd_0_23:24;
 		unsigned long	dest_base:22;			/* RW */
@@ -3415,12 +2839,10 @@ union uvh_rh_gam_alias210_redirect_config_0_mmr_u {
 /* ========================================================================= */
 /*                UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR                  */
 /* ========================================================================= */
-#define UV1H_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR 0x16000e0UL
 #define UV2H_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR 0x16000e0UL
 #define UV3H_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR 0x16000e0UL
 #define UV4H_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR 0x4800e0UL
 #define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR (			\
-	is_uv1_hub() ? UV1H_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR :	\
 	is_uv2_hub() ? UV2H_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR :	\
 	is_uv3_hub() ? UV3H_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR :	\
 	/*is_uv4_hub*/ UV4H_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR)
@@ -3428,9 +2850,6 @@ union uvh_rh_gam_alias210_redirect_config_0_mmr_u {
 #define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR_DEST_BASE_SHFT 24
 #define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR_DEST_BASE_MASK 0x00003fffff000000UL
 
-#define UV1H_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR_DEST_BASE_SHFT 24
-#define UV1H_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR_DEST_BASE_MASK 0x00003fffff000000UL
-
 #define UVXH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR_DEST_BASE_SHFT 24
 #define UVXH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR_DEST_BASE_MASK 0x00003fffff000000UL
 
@@ -3451,11 +2870,6 @@ union uvh_rh_gam_alias210_redirect_config_1_mmr_u {
 		unsigned long	dest_base:22;			/* RW */
 		unsigned long	rsvd_46_63:18;
 	} s;
-	struct uv1h_rh_gam_alias210_redirect_config_1_mmr_s {
-		unsigned long	rsvd_0_23:24;
-		unsigned long	dest_base:22;			/* RW */
-		unsigned long	rsvd_46_63:18;
-	} s1;
 	struct uvxh_rh_gam_alias210_redirect_config_1_mmr_s {
 		unsigned long	rsvd_0_23:24;
 		unsigned long	dest_base:22;			/* RW */
@@ -3481,12 +2895,10 @@ union uvh_rh_gam_alias210_redirect_config_1_mmr_u {
 /* ========================================================================= */
 /*                UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR                  */
 /* ========================================================================= */
-#define UV1H_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR 0x16000f0UL
 #define UV2H_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR 0x16000f0UL
 #define UV3H_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR 0x16000f0UL
 #define UV4H_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR 0x4800f0UL
 #define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR (			\
-	is_uv1_hub() ? UV1H_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR :	\
 	is_uv2_hub() ? UV2H_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR :	\
 	is_uv3_hub() ? UV3H_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR :	\
 	/*is_uv4_hub*/ UV4H_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR)
@@ -3494,9 +2906,6 @@ union uvh_rh_gam_alias210_redirect_config_1_mmr_u {
 #define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR_DEST_BASE_SHFT 24
 #define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR_DEST_BASE_MASK 0x00003fffff000000UL
 
-#define UV1H_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR_DEST_BASE_SHFT 24
-#define UV1H_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR_DEST_BASE_MASK 0x00003fffff000000UL
-
 #define UVXH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR_DEST_BASE_SHFT 24
 #define UVXH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR_DEST_BASE_MASK 0x00003fffff000000UL
 
@@ -3517,11 +2926,6 @@ union uvh_rh_gam_alias210_redirect_config_2_mmr_u {
 		unsigned long	dest_base:22;			/* RW */
 		unsigned long	rsvd_46_63:18;
 	} s;
-	struct uv1h_rh_gam_alias210_redirect_config_2_mmr_s {
-		unsigned long	rsvd_0_23:24;
-		unsigned long	dest_base:22;			/* RW */
-		unsigned long	rsvd_46_63:18;
-	} s1;
 	struct uvxh_rh_gam_alias210_redirect_config_2_mmr_s {
 		unsigned long	rsvd_0_23:24;
 		unsigned long	dest_base:22;			/* RW */
@@ -3547,12 +2951,10 @@ union uvh_rh_gam_alias210_redirect_config_2_mmr_u {
 /* ========================================================================= */
 /*                          UVH_RH_GAM_CONFIG_MMR                            */
 /* ========================================================================= */
-#define UV1H_RH_GAM_CONFIG_MMR 0x1600000UL
 #define UV2H_RH_GAM_CONFIG_MMR 0x1600000UL
 #define UV3H_RH_GAM_CONFIG_MMR 0x1600000UL
 #define UV4H_RH_GAM_CONFIG_MMR 0x480000UL
 #define UVH_RH_GAM_CONFIG_MMR (						\
-	is_uv1_hub() ? UV1H_RH_GAM_CONFIG_MMR :				\
 	is_uv2_hub() ? UV2H_RH_GAM_CONFIG_MMR :				\
 	is_uv3_hub() ? UV3H_RH_GAM_CONFIG_MMR :				\
 	/*is_uv4_hub*/ UV4H_RH_GAM_CONFIG_MMR)
@@ -3560,13 +2962,6 @@ union uvh_rh_gam_alias210_redirect_config_2_mmr_u {
 #define UVH_RH_GAM_CONFIG_MMR_N_SKT_SHFT		6
 #define UVH_RH_GAM_CONFIG_MMR_N_SKT_MASK		0x00000000000003c0UL
 
-#define UV1H_RH_GAM_CONFIG_MMR_M_SKT_SHFT		0
-#define UV1H_RH_GAM_CONFIG_MMR_N_SKT_SHFT		6
-#define UV1H_RH_GAM_CONFIG_MMR_MMIOL_CFG_SHFT		12
-#define UV1H_RH_GAM_CONFIG_MMR_M_SKT_MASK		0x000000000000003fUL
-#define UV1H_RH_GAM_CONFIG_MMR_N_SKT_MASK		0x00000000000003c0UL
-#define UV1H_RH_GAM_CONFIG_MMR_MMIOL_CFG_MASK		0x0000000000001000UL
-
 #define UVXH_RH_GAM_CONFIG_MMR_N_SKT_SHFT		6
 #define UVXH_RH_GAM_CONFIG_MMR_N_SKT_MASK		0x00000000000003c0UL
 
@@ -3591,13 +2986,6 @@ union uvh_rh_gam_config_mmr_u {
 		unsigned long	n_skt:4;			/* RW */
 		unsigned long	rsvd_10_63:54;
 	} s;
-	struct uv1h_rh_gam_config_mmr_s {
-		unsigned long	m_skt:6;			/* RW */
-		unsigned long	n_skt:4;			/* RW */
-		unsigned long	rsvd_10_11:2;
-		unsigned long	mmiol_cfg:1;			/* RW */
-		unsigned long	rsvd_13_63:51;
-	} s1;
 	struct uvxh_rh_gam_config_mmr_s {
 		unsigned long	rsvd_0_5:6;
 		unsigned long	n_skt:4;			/* RW */
@@ -3623,12 +3011,10 @@ union uvh_rh_gam_config_mmr_u {
 /* ========================================================================= */
 /*                    UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR                      */
 /* ========================================================================= */
-#define UV1H_RH_GAM_GRU_OVERLAY_CONFIG_MMR 0x1600010UL
 #define UV2H_RH_GAM_GRU_OVERLAY_CONFIG_MMR 0x1600010UL
 #define UV3H_RH_GAM_GRU_OVERLAY_CONFIG_MMR 0x1600010UL
 #define UV4H_RH_GAM_GRU_OVERLAY_CONFIG_MMR 0x480010UL
 #define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR (				\
-	is_uv1_hub() ? UV1H_RH_GAM_GRU_OVERLAY_CONFIG_MMR :		\
 	is_uv2_hub() ? UV2H_RH_GAM_GRU_OVERLAY_CONFIG_MMR :		\
 	is_uv3_hub() ? UV3H_RH_GAM_GRU_OVERLAY_CONFIG_MMR :		\
 	/*is_uv4_hub*/ UV4H_RH_GAM_GRU_OVERLAY_CONFIG_MMR)
@@ -3638,15 +3024,6 @@ union uvh_rh_gam_config_mmr_u {
 #define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_N_GRU_MASK	0x00f0000000000000UL
 #define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_ENABLE_MASK	0x8000000000000000UL
 
-#define UV1H_RH_GAM_GRU_OVERLAY_CONFIG_MMR_BASE_SHFT	28
-#define UV1H_RH_GAM_GRU_OVERLAY_CONFIG_MMR_GR4_SHFT	48
-#define UV1H_RH_GAM_GRU_OVERLAY_CONFIG_MMR_N_GRU_SHFT	52
-#define UV1H_RH_GAM_GRU_OVERLAY_CONFIG_MMR_ENABLE_SHFT	63
-#define UV1H_RH_GAM_GRU_OVERLAY_CONFIG_MMR_BASE_MASK	0x00003ffff0000000UL
-#define UV1H_RH_GAM_GRU_OVERLAY_CONFIG_MMR_GR4_MASK	0x0001000000000000UL
-#define UV1H_RH_GAM_GRU_OVERLAY_CONFIG_MMR_N_GRU_MASK	0x00f0000000000000UL
-#define UV1H_RH_GAM_GRU_OVERLAY_CONFIG_MMR_ENABLE_MASK	0x8000000000000000UL
-
 #define UVXH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_N_GRU_SHFT	52
 #define UVXH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_ENABLE_SHFT	63
 #define UVXH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_N_GRU_MASK	0x00f0000000000000UL
@@ -3676,12 +3053,10 @@ union uvh_rh_gam_config_mmr_u {
 #define UV4H_RH_GAM_GRU_OVERLAY_CONFIG_MMR_ENABLE_MASK	0x8000000000000000UL
 
 #define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_BASE_MASK (			\
-	is_uv1_hub() ? UV1H_RH_GAM_GRU_OVERLAY_CONFIG_MMR_BASE_MASK :	\
 	is_uv2_hub() ? UV2H_RH_GAM_GRU_OVERLAY_CONFIG_MMR_BASE_MASK :	\
 	is_uv3_hub() ? UV3H_RH_GAM_GRU_OVERLAY_CONFIG_MMR_BASE_MASK :	\
 	/*is_uv4_hub*/ UV4H_RH_GAM_GRU_OVERLAY_CONFIG_MMR_BASE_MASK)
 #define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_BASE_SHFT (			\
-	is_uv1_hub() ? UV1H_RH_GAM_GRU_OVERLAY_CONFIG_MMR_BASE_SHFT :	\
 	is_uv2_hub() ? UV2H_RH_GAM_GRU_OVERLAY_CONFIG_MMR_BASE_SHFT :	\
 	is_uv3_hub() ? UV3H_RH_GAM_GRU_OVERLAY_CONFIG_MMR_BASE_SHFT :	\
 	/*is_uv4_hub*/ UV4H_RH_GAM_GRU_OVERLAY_CONFIG_MMR_BASE_SHFT)
@@ -3694,16 +3069,6 @@ union uvh_rh_gam_gru_overlay_config_mmr_u {
 		unsigned long	rsvd_56_62:7;
 		unsigned long	enable:1;			/* RW */
 	} s;
-	struct uv1h_rh_gam_gru_overlay_config_mmr_s {
-		unsigned long	rsvd_0_27:28;
-		unsigned long	base:18;			/* RW */
-		unsigned long	rsvd_46_47:2;
-		unsigned long	gr4:1;				/* RW */
-		unsigned long	rsvd_49_51:3;
-		unsigned long	n_gru:4;			/* RW */
-		unsigned long	rsvd_56_62:7;
-		unsigned long	enable:1;			/* RW */
-	} s1;
 	struct uvxh_rh_gam_gru_overlay_config_mmr_s {
 		unsigned long	rsvd_0_45:46;
 		unsigned long	rsvd_46_51:6;
@@ -3742,12 +3107,10 @@ union uvh_rh_gam_gru_overlay_config_mmr_u {
 /* ========================================================================= */
 /*                   UVH_RH_GAM_MMIOH_OVERLAY_CONFIG0_MMR                    */
 /* ========================================================================= */
-#define UV1H_RH_GAM_MMIOH_OVERLAY_CONFIG0_MMR uv_undefined("UV1H_RH_GAM_MMIOH_OVERLAY_CONFIG0_MMR")
 #define UV2H_RH_GAM_MMIOH_OVERLAY_CONFIG0_MMR uv_undefined("UV2H_RH_GAM_MMIOH_OVERLAY_CONFIG0_MMR")
 #define UV3H_RH_GAM_MMIOH_OVERLAY_CONFIG0_MMR 0x1603000UL
 #define UV4H_RH_GAM_MMIOH_OVERLAY_CONFIG0_MMR 0x483000UL
 #define UVH_RH_GAM_MMIOH_OVERLAY_CONFIG0_MMR (				\
-	is_uv1_hub() ? UV1H_RH_GAM_MMIOH_OVERLAY_CONFIG0_MMR :		\
 	is_uv2_hub() ? UV2H_RH_GAM_MMIOH_OVERLAY_CONFIG0_MMR :		\
 	is_uv3_hub() ? UV3H_RH_GAM_MMIOH_OVERLAY_CONFIG0_MMR :		\
 	/*is_uv4_hub*/ UV4H_RH_GAM_MMIOH_OVERLAY_CONFIG0_MMR)
@@ -3823,12 +3186,10 @@ union uvh_rh_gam_mmioh_overlay_config0_mmr_u {
 /* ========================================================================= */
 /*                   UVH_RH_GAM_MMIOH_OVERLAY_CONFIG1_MMR                    */
 /* ========================================================================= */
-#define UV1H_RH_GAM_MMIOH_OVERLAY_CONFIG1_MMR uv_undefined("UV1H_RH_GAM_MMIOH_OVERLAY_CONFIG1_MMR")
 #define UV2H_RH_GAM_MMIOH_OVERLAY_CONFIG1_MMR uv_undefined("UV2H_RH_GAM_MMIOH_OVERLAY_CONFIG1_MMR")
 #define UV3H_RH_GAM_MMIOH_OVERLAY_CONFIG1_MMR 0x1603000UL
 #define UV4H_RH_GAM_MMIOH_OVERLAY_CONFIG1_MMR 0x484000UL
 #define UVH_RH_GAM_MMIOH_OVERLAY_CONFIG1_MMR (				\
-	is_uv1_hub() ? UV1H_RH_GAM_MMIOH_OVERLAY_CONFIG1_MMR :		\
 	is_uv2_hub() ? UV2H_RH_GAM_MMIOH_OVERLAY_CONFIG1_MMR :		\
 	is_uv3_hub() ? UV3H_RH_GAM_MMIOH_OVERLAY_CONFIG1_MMR :		\
 	/*is_uv4_hub*/ UV4H_RH_GAM_MMIOH_OVERLAY_CONFIG1_MMR)
@@ -3898,27 +3259,15 @@ union uvh_rh_gam_mmioh_overlay_config1_mmr_u {
 /* ========================================================================= */
 /*                   UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR                     */
 /* ========================================================================= */
-#define UV1H_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR 0x1600030UL
 #define UV2H_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR 0x1600030UL
 #define UV3H_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR uv_undefined("UV3H_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR")
 #define UV4H_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR uv_undefined("UV4H_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR")
 #define UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR (				\
-	is_uv1_hub() ? UV1H_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR :		\
 	is_uv2_hub() ? UV2H_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR :		\
 	is_uv3_hub() ? UV3H_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR :		\
 	/*is_uv4_hub*/ UV4H_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR)
 
 
-#define UV1H_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_BASE_SHFT	30
-#define UV1H_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_M_IO_SHFT	46
-#define UV1H_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_N_IO_SHFT	52
-#define UV1H_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_ENABLE_SHFT 63
-#define UV1H_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_BASE_MASK	0x00003fffc0000000UL
-#define UV1H_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_M_IO_MASK	0x000fc00000000000UL
-#define UV1H_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_N_IO_MASK	0x00f0000000000000UL
-#define UV1H_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_ENABLE_MASK 0x8000000000000000UL
-
-
 #define UV2H_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_BASE_SHFT	27
 #define UV2H_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_M_IO_SHFT	46
 #define UV2H_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_N_IO_SHFT	52
@@ -3931,14 +3280,6 @@ union uvh_rh_gam_mmioh_overlay_config1_mmr_u {
 
 union uvh_rh_gam_mmioh_overlay_config_mmr_u {
 	unsigned long	v;
-	struct uv1h_rh_gam_mmioh_overlay_config_mmr_s {
-		unsigned long	rsvd_0_29:30;
-		unsigned long	base:16;			/* RW */
-		unsigned long	m_io:6;				/* RW */
-		unsigned long	n_io:4;				/* RW */
-		unsigned long	rsvd_56_62:7;
-		unsigned long	enable:1;			/* RW */
-	} s1;
 	struct uv2h_rh_gam_mmioh_overlay_config_mmr_s {
 		unsigned long	rsvd_0_26:27;
 		unsigned long	base:19;			/* RW */
@@ -3952,22 +3293,18 @@ union uvh_rh_gam_mmioh_overlay_config_mmr_u {
 /* ========================================================================= */
 /*                  UVH_RH_GAM_MMIOH_REDIRECT_CONFIG0_MMR                    */
 /* ========================================================================= */
-#define UV1H_RH_GAM_MMIOH_REDIRECT_CONFIG0_MMR uv_undefined("UV1H_RH_GAM_MMIOH_REDIRECT_CONFIG0_MMR")
 #define UV2H_RH_GAM_MMIOH_REDIRECT_CONFIG0_MMR uv_undefined("UV2H_RH_GAM_MMIOH_REDIRECT_CONFIG0_MMR")
 #define UV3H_RH_GAM_MMIOH_REDIRECT_CONFIG0_MMR 0x1603800UL
 #define UV4H_RH_GAM_MMIOH_REDIRECT_CONFIG0_MMR 0x483800UL
 #define UVH_RH_GAM_MMIOH_REDIRECT_CONFIG0_MMR (				\
-	is_uv1_hub() ? UV1H_RH_GAM_MMIOH_REDIRECT_CONFIG0_MMR :		\
 	is_uv2_hub() ? UV2H_RH_GAM_MMIOH_REDIRECT_CONFIG0_MMR :		\
 	is_uv3_hub() ? UV3H_RH_GAM_MMIOH_REDIRECT_CONFIG0_MMR :		\
 	/*is_uv4_hub*/ UV4H_RH_GAM_MMIOH_REDIRECT_CONFIG0_MMR)
 
-#define UV1H_RH_GAM_MMIOH_REDIRECT_CONFIG0_MMR_DEPTH uv_undefined("UV1H_RH_GAM_MMIOH_REDIRECT_CONFIG0_MMR_DEPTH")
 #define UV2H_RH_GAM_MMIOH_REDIRECT_CONFIG0_MMR_DEPTH uv_undefined("UV2H_RH_GAM_MMIOH_REDIRECT_CONFIG0_MMR_DEPTH")
 #define UV3H_RH_GAM_MMIOH_REDIRECT_CONFIG0_MMR_DEPTH 128
 #define UV4H_RH_GAM_MMIOH_REDIRECT_CONFIG0_MMR_DEPTH 128
 #define UVH_RH_GAM_MMIOH_REDIRECT_CONFIG0_MMR_DEPTH (			\
-	is_uv1_hub() ? UV1H_RH_GAM_MMIOH_REDIRECT_CONFIG0_MMR_DEPTH :	\
 	is_uv2_hub() ? UV2H_RH_GAM_MMIOH_REDIRECT_CONFIG0_MMR_DEPTH :	\
 	is_uv3_hub() ? UV3H_RH_GAM_MMIOH_REDIRECT_CONFIG0_MMR_DEPTH :	\
 	/*is_uv4_hub*/ UV4H_RH_GAM_MMIOH_REDIRECT_CONFIG0_MMR_DEPTH)
@@ -4005,22 +3342,18 @@ union uvh_rh_gam_mmioh_redirect_config0_mmr_u {
 /* ========================================================================= */
 /*                  UVH_RH_GAM_MMIOH_REDIRECT_CONFIG1_MMR                    */
 /* ========================================================================= */
-#define UV1H_RH_GAM_MMIOH_REDIRECT_CONFIG1_MMR uv_undefined("UV1H_RH_GAM_MMIOH_REDIRECT_CONFIG1_MMR")
 #define UV2H_RH_GAM_MMIOH_REDIRECT_CONFIG1_MMR uv_undefined("UV2H_RH_GAM_MMIOH_REDIRECT_CONFIG1_MMR")
 #define UV3H_RH_GAM_MMIOH_REDIRECT_CONFIG1_MMR 0x1604800UL
 #define UV4H_RH_GAM_MMIOH_REDIRECT_CONFIG1_MMR 0x484800UL
 #define UVH_RH_GAM_MMIOH_REDIRECT_CONFIG1_MMR (				\
-	is_uv1_hub() ? UV1H_RH_GAM_MMIOH_REDIRECT_CONFIG1_MMR :		\
 	is_uv2_hub() ? UV2H_RH_GAM_MMIOH_REDIRECT_CONFIG1_MMR :		\
 	is_uv3_hub() ? UV3H_RH_GAM_MMIOH_REDIRECT_CONFIG1_MMR :		\
 	/*is_uv4_hub*/ UV4H_RH_GAM_MMIOH_REDIRECT_CONFIG1_MMR)
 
-#define UV1H_RH_GAM_MMIOH_REDIRECT_CONFIG1_MMR_DEPTH uv_undefined("UV1H_RH_GAM_MMIOH_REDIRECT_CONFIG1_MMR_DEPTH")
 #define UV2H_RH_GAM_MMIOH_REDIRECT_CONFIG1_MMR_DEPTH uv_undefined("UV2H_RH_GAM_MMIOH_REDIRECT_CONFIG1_MMR_DEPTH")
 #define UV3H_RH_GAM_MMIOH_REDIRECT_CONFIG1_MMR_DEPTH 128
 #define UV4H_RH_GAM_MMIOH_REDIRECT_CONFIG1_MMR_DEPTH 128
 #define UVH_RH_GAM_MMIOH_REDIRECT_CONFIG1_MMR_DEPTH (			\
-	is_uv1_hub() ? UV1H_RH_GAM_MMIOH_REDIRECT_CONFIG1_MMR_DEPTH :	\
 	is_uv2_hub() ? UV2H_RH_GAM_MMIOH_REDIRECT_CONFIG1_MMR_DEPTH :	\
 	is_uv3_hub() ? UV3H_RH_GAM_MMIOH_REDIRECT_CONFIG1_MMR_DEPTH :	\
 	/*is_uv4_hub*/ UV4H_RH_GAM_MMIOH_REDIRECT_CONFIG1_MMR_DEPTH)
@@ -4058,12 +3391,10 @@ union uvh_rh_gam_mmioh_redirect_config1_mmr_u {
 /* ========================================================================= */
 /*                    UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR                      */
 /* ========================================================================= */
-#define UV1H_RH_GAM_MMR_OVERLAY_CONFIG_MMR 0x1600028UL
 #define UV2H_RH_GAM_MMR_OVERLAY_CONFIG_MMR 0x1600028UL
 #define UV3H_RH_GAM_MMR_OVERLAY_CONFIG_MMR 0x1600028UL
 #define UV4H_RH_GAM_MMR_OVERLAY_CONFIG_MMR 0x480028UL
 #define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR (				\
-	is_uv1_hub() ? UV1H_RH_GAM_MMR_OVERLAY_CONFIG_MMR :		\
 	is_uv2_hub() ? UV2H_RH_GAM_MMR_OVERLAY_CONFIG_MMR :		\
 	is_uv3_hub() ? UV3H_RH_GAM_MMR_OVERLAY_CONFIG_MMR :		\
 	/*is_uv4_hub*/ UV4H_RH_GAM_MMR_OVERLAY_CONFIG_MMR)
@@ -4073,13 +3404,6 @@ union uvh_rh_gam_mmioh_redirect_config1_mmr_u {
 #define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_BASE_MASK	0x00003ffffc000000UL
 #define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_ENABLE_MASK	0x8000000000000000UL
 
-#define UV1H_RH_GAM_MMR_OVERLAY_CONFIG_MMR_BASE_SHFT	26
-#define UV1H_RH_GAM_MMR_OVERLAY_CONFIG_MMR_DUAL_HUB_SHFT 46
-#define UV1H_RH_GAM_MMR_OVERLAY_CONFIG_MMR_ENABLE_SHFT	63
-#define UV1H_RH_GAM_MMR_OVERLAY_CONFIG_MMR_BASE_MASK	0x00003ffffc000000UL
-#define UV1H_RH_GAM_MMR_OVERLAY_CONFIG_MMR_DUAL_HUB_MASK 0x0000400000000000UL
-#define UV1H_RH_GAM_MMR_OVERLAY_CONFIG_MMR_ENABLE_MASK	0x8000000000000000UL
-
 #define UVXH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_BASE_SHFT	26
 #define UVXH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_ENABLE_SHFT	63
 #define UVXH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_BASE_MASK	0x00003ffffc000000UL
@@ -4109,13 +3433,6 @@ union uvh_rh_gam_mmr_overlay_config_mmr_u {
 		unsigned long	rsvd_46_62:17;
 		unsigned long	enable:1;			/* RW */
 	} s;
-	struct uv1h_rh_gam_mmr_overlay_config_mmr_s {
-		unsigned long	rsvd_0_25:26;
-		unsigned long	base:20;			/* RW */
-		unsigned long	dual_hub:1;			/* RW */
-		unsigned long	rsvd_47_62:16;
-		unsigned long	enable:1;			/* RW */
-	} s1;
 	struct uvxh_rh_gam_mmr_overlay_config_mmr_s {
 		unsigned long	rsvd_0_25:26;
 		unsigned long	base:20;			/* RW */
@@ -4145,12 +3462,10 @@ union uvh_rh_gam_mmr_overlay_config_mmr_u {
 /* ========================================================================= */
 /*                                 UVH_RTC                                   */
 /* ========================================================================= */
-#define UV1H_RTC 0x340000UL
 #define UV2H_RTC 0x340000UL
 #define UV3H_RTC 0x340000UL
 #define UV4H_RTC 0xe0000UL
 #define UVH_RTC (							\
-	is_uv1_hub() ? UV1H_RTC :					\
 	is_uv2_hub() ? UV2H_RTC :					\
 	is_uv3_hub() ? UV3H_RTC :					\
 	/*is_uv4_hub*/ UV4H_RTC)
@@ -4209,22 +3524,18 @@ union uvh_rtc1_int_config_u {
 /* ========================================================================= */
 /*                               UVH_SCRATCH5                                */
 /* ========================================================================= */
-#define UV1H_SCRATCH5 0x2d0200UL
 #define UV2H_SCRATCH5 0x2d0200UL
 #define UV3H_SCRATCH5 0x2d0200UL
 #define UV4H_SCRATCH5 0xb0200UL
 #define UVH_SCRATCH5 (							\
-	is_uv1_hub() ? UV1H_SCRATCH5 :					\
 	is_uv2_hub() ? UV2H_SCRATCH5 :					\
 	is_uv3_hub() ? UV3H_SCRATCH5 :					\
 	/*is_uv4_hub*/ UV4H_SCRATCH5)
 
-#define UV1H_SCRATCH5_32 0x778
 #define UV2H_SCRATCH5_32 0x778
 #define UV3H_SCRATCH5_32 0x778
 #define UV4H_SCRATCH5_32 0x798
 #define UVH_SCRATCH5_32 (						\
-	is_uv1_hub() ? UV1H_SCRATCH5_32 :				\
 	is_uv2_hub() ? UV2H_SCRATCH5_32 :				\
 	is_uv3_hub() ? UV3H_SCRATCH5_32 :				\
 	/*is_uv4_hub*/ UV4H_SCRATCH5_32)
@@ -4243,22 +3554,18 @@ union uvh_scratch5_u {
 /* ========================================================================= */
 /*                            UVH_SCRATCH5_ALIAS                             */
 /* ========================================================================= */
-#define UV1H_SCRATCH5_ALIAS 0x2d0208UL
 #define UV2H_SCRATCH5_ALIAS 0x2d0208UL
 #define UV3H_SCRATCH5_ALIAS 0x2d0208UL
 #define UV4H_SCRATCH5_ALIAS 0xb0208UL
 #define UVH_SCRATCH5_ALIAS (						\
-	is_uv1_hub() ? UV1H_SCRATCH5_ALIAS :				\
 	is_uv2_hub() ? UV2H_SCRATCH5_ALIAS :				\
 	is_uv3_hub() ? UV3H_SCRATCH5_ALIAS :				\
 	/*is_uv4_hub*/ UV4H_SCRATCH5_ALIAS)
 
-#define UV1H_SCRATCH5_ALIAS_32 0x780
 #define UV2H_SCRATCH5_ALIAS_32 0x780
 #define UV3H_SCRATCH5_ALIAS_32 0x780
 #define UV4H_SCRATCH5_ALIAS_32 0x7a0
 #define UVH_SCRATCH5_ALIAS_32 (						\
-	is_uv1_hub() ? UV1H_SCRATCH5_ALIAS_32 :				\
 	is_uv2_hub() ? UV2H_SCRATCH5_ALIAS_32 :				\
 	is_uv3_hub() ? UV3H_SCRATCH5_ALIAS_32 :				\
 	/*is_uv4_hub*/ UV4H_SCRATCH5_ALIAS_32)
@@ -4267,12 +3574,10 @@ union uvh_scratch5_u {
 /* ========================================================================= */
 /*                           UVH_SCRATCH5_ALIAS_2                            */
 /* ========================================================================= */
-#define UV1H_SCRATCH5_ALIAS_2 0x2d0210UL
 #define UV2H_SCRATCH5_ALIAS_2 0x2d0210UL
 #define UV3H_SCRATCH5_ALIAS_2 0x2d0210UL
 #define UV4H_SCRATCH5_ALIAS_2 0xb0210UL
 #define UVH_SCRATCH5_ALIAS_2 (						\
-	is_uv1_hub() ? UV1H_SCRATCH5_ALIAS_2 :				\
 	is_uv2_hub() ? UV2H_SCRATCH5_ALIAS_2 :				\
 	is_uv3_hub() ? UV3H_SCRATCH5_ALIAS_2 :				\
 	/*is_uv4_hub*/ UV4H_SCRATCH5_ALIAS_2)
@@ -4719,23 +4024,6 @@ union uvxh_lb_bau_sb_activation_status_2_u {
 };
 
 /* ========================================================================= */
-/*                   UV1H_LB_TARGET_PHYSICAL_APIC_ID_MASK                    */
-/* ========================================================================= */
-#define UV1H_LB_TARGET_PHYSICAL_APIC_ID_MASK		0x320130UL
-#define UV1H_LB_TARGET_PHYSICAL_APIC_ID_MASK_32		0x9f0
-
-#define UV1H_LB_TARGET_PHYSICAL_APIC_ID_MASK_BIT_ENABLES_SHFT 0
-#define UV1H_LB_TARGET_PHYSICAL_APIC_ID_MASK_BIT_ENABLES_MASK 0x00000000ffffffffUL
-
-union uv1h_lb_target_physical_apic_id_mask_u {
-	unsigned long	v;
-	struct uv1h_lb_target_physical_apic_id_mask_s {
-		unsigned long	bit_enables:32;			/* RW */
-		unsigned long	rsvd_32_63:32;
-	} s1;
-};
-
-/* ========================================================================= */
 /*                          UV3H_GR0_GAM_GR_CONFIG                           */
 /* ========================================================================= */
 #define UV3H_GR0_GAM_GR_CONFIG				0xc00028UL
diff --git a/arch/x86/include/uapi/asm/bootparam.h b/arch/x86/include/uapi/asm/bootparam.h
index 8669c6bdbb84..600a141c8805 100644
--- a/arch/x86/include/uapi/asm/bootparam.h
+++ b/arch/x86/include/uapi/asm/bootparam.h
@@ -255,7 +255,7 @@ struct boot_params {
  * 	currently supportd through this PV boot path.
  * @X86_SUBARCH_INTEL_MID: Used for Intel MID (Mobile Internet Device) platform
  *	systems which do not have the PCI legacy interfaces.
- * @X86_SUBARCH_CE4100: Used for Intel CE media processor (CE4100) SoC for
+ * @X86_SUBARCH_CE4100: Used for Intel CE media processor (CE4100) SoC
  * 	for settop boxes and media devices, the use of a subarch for CE4100
  * 	is more of a hack...
  */
diff --git a/arch/x86/include/uapi/asm/hwcap2.h b/arch/x86/include/uapi/asm/hwcap2.h
index 8b2effe6efb8..5fdfcb47000f 100644
--- a/arch/x86/include/uapi/asm/hwcap2.h
+++ b/arch/x86/include/uapi/asm/hwcap2.h
@@ -5,4 +5,7 @@
 /* MONITOR/MWAIT enabled in Ring 3 */
 #define HWCAP2_RING3MWAIT		(1 << 0)
 
+/* Kernel allows FSGSBASE instructions available in Ring 3 */
+#define HWCAP2_FSGSBASE			BIT(1)
+
 #endif
diff --git a/arch/x86/include/uapi/asm/kvm.h b/arch/x86/include/uapi/asm/kvm.h
index 17c5a038f42d..0780f97c1850 100644
--- a/arch/x86/include/uapi/asm/kvm.h
+++ b/arch/x86/include/uapi/asm/kvm.h
@@ -408,14 +408,15 @@ struct kvm_vmx_nested_state_data {
 };
 
 struct kvm_vmx_nested_state_hdr {
-	__u32 flags;
 	__u64 vmxon_pa;
 	__u64 vmcs12_pa;
-	__u64 preemption_timer_deadline;
 
 	struct {
 		__u16 flags;
 	} smm;
+
+	__u32 flags;
+	__u64 preemption_timer_deadline;
 };
 
 struct kvm_svm_nested_state_data {
diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c
index 8fd39ff74a49..c826cddae157 100644
--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -3,6 +3,7 @@
 
 #include <linux/module.h>
 #include <linux/sched.h>
+#include <linux/perf_event.h>
 #include <linux/mutex.h>
 #include <linux/list.h>
 #include <linux/stringify.h>
@@ -15,6 +16,7 @@
 #include <linux/kprobes.h>
 #include <linux/mmu_context.h>
 #include <linux/bsearch.h>
+#include <linux/sync_core.h>
 #include <asm/text-patching.h>
 #include <asm/alternative.h>
 #include <asm/sections.h>
@@ -53,7 +55,7 @@ __setup("noreplace-smp", setup_noreplace_smp);
 #define DPRINTK(fmt, args...)						\
 do {									\
 	if (debug_alternative)						\
-		printk(KERN_DEBUG "%s: " fmt "\n", __func__, ##args);	\
+		printk(KERN_DEBUG pr_fmt(fmt) "\n", ##args);		\
 } while (0)
 
 #define DUMP_BYTES(buf, len, fmt, args...)				\
@@ -64,7 +66,7 @@ do {									\
 		if (!(len))						\
 			break;						\
 									\
-		printk(KERN_DEBUG fmt, ##args);				\
+		printk(KERN_DEBUG pr_fmt(fmt), ##args);			\
 		for (j = 0; j < (len) - 1; j++)				\
 			printk(KERN_CONT "%02hhx ", buf[j]);		\
 		printk(KERN_CONT "%02hhx\n", buf[j]);			\
@@ -1001,6 +1003,7 @@ struct text_poke_loc {
 	s32 rel32;
 	u8 opcode;
 	const u8 text[POKE_MAX_OPCODE_SIZE];
+	u8 old;
 };
 
 struct bp_patching_desc {
@@ -1044,7 +1047,7 @@ static __always_inline int patch_cmp(const void *key, const void *elt)
 	return 0;
 }
 
-int noinstr poke_int3_handler(struct pt_regs *regs)
+noinstr int poke_int3_handler(struct pt_regs *regs)
 {
 	struct bp_patching_desc *desc;
 	struct text_poke_loc *tp;
@@ -1168,8 +1171,10 @@ static void text_poke_bp_batch(struct text_poke_loc *tp, unsigned int nr_entries
 	/*
 	 * First step: add a int3 trap to the address that will be patched.
 	 */
-	for (i = 0; i < nr_entries; i++)
+	for (i = 0; i < nr_entries; i++) {
+		tp[i].old = *(u8 *)text_poke_addr(&tp[i]);
 		text_poke(text_poke_addr(&tp[i]), &int3, INT3_INSN_SIZE);
+	}
 
 	text_poke_sync();
 
@@ -1177,14 +1182,45 @@ static void text_poke_bp_batch(struct text_poke_loc *tp, unsigned int nr_entries
 	 * Second step: update all but the first byte of the patched range.
 	 */
 	for (do_sync = 0, i = 0; i < nr_entries; i++) {
+		u8 old[POKE_MAX_OPCODE_SIZE] = { tp[i].old, };
 		int len = text_opcode_size(tp[i].opcode);
 
 		if (len - INT3_INSN_SIZE > 0) {
+			memcpy(old + INT3_INSN_SIZE,
+			       text_poke_addr(&tp[i]) + INT3_INSN_SIZE,
+			       len - INT3_INSN_SIZE);
 			text_poke(text_poke_addr(&tp[i]) + INT3_INSN_SIZE,
 				  (const char *)tp[i].text + INT3_INSN_SIZE,
 				  len - INT3_INSN_SIZE);
 			do_sync++;
 		}
+
+		/*
+		 * Emit a perf event to record the text poke, primarily to
+		 * support Intel PT decoding which must walk the executable code
+		 * to reconstruct the trace. The flow up to here is:
+		 *   - write INT3 byte
+		 *   - IPI-SYNC
+		 *   - write instruction tail
+		 * At this point the actual control flow will be through the
+		 * INT3 and handler and not hit the old or new instruction.
+		 * Intel PT outputs FUP/TIP packets for the INT3, so the flow
+		 * can still be decoded. Subsequently:
+		 *   - emit RECORD_TEXT_POKE with the new instruction
+		 *   - IPI-SYNC
+		 *   - write first byte
+		 *   - IPI-SYNC
+		 * So before the text poke event timestamp, the decoder will see
+		 * either the old instruction flow or FUP/TIP of INT3. After the
+		 * text poke event timestamp, the decoder will see either the
+		 * new instruction flow or FUP/TIP of INT3. Thus decoders can
+		 * use the timestamp as the point at which to modify the
+		 * executable code.
+		 * The old instruction is recorded so that the event can be
+		 * processed forwards or backwards.
+		 */
+		perf_event_text_poke(text_poke_addr(&tp[i]), old, len,
+				     tp[i].text, len);
 	}
 
 	if (do_sync) {
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index ce61e3e7d399..21325a4a78b9 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -2316,12 +2316,12 @@ static int mp_irqdomain_create(int ioapic)
 	ip->irqdomain = irq_domain_create_linear(fn, hwirqs, cfg->ops,
 						 (void *)(long)ioapic);
 
-	/* Release fw handle if it was allocated above */
-	if (!cfg->dev)
-		irq_domain_free_fwnode(fn);
-
-	if (!ip->irqdomain)
+	if (!ip->irqdomain) {
+		/* Release fw handle if it was allocated above */
+		if (!cfg->dev)
+			irq_domain_free_fwnode(fn);
 		return -ENOMEM;
+	}
 
 	ip->irqdomain->parent = parent;
 
@@ -2335,8 +2335,13 @@ static int mp_irqdomain_create(int ioapic)
 
 static void ioapic_destroy_irqdomain(int idx)
 {
+	struct ioapic_domain_cfg *cfg = &ioapics[idx].irqdomain_cfg;
+	struct fwnode_handle *fn = ioapics[idx].irqdomain->fwnode;
+
 	if (ioapics[idx].irqdomain) {
 		irq_domain_remove(ioapics[idx].irqdomain);
+		if (!cfg->dev)
+			irq_domain_free_fwnode(fn);
 		ioapics[idx].irqdomain = NULL;
 	}
 }
diff --git a/arch/x86/kernel/apic/msi.c b/arch/x86/kernel/apic/msi.c
index 5cbaca58af95..c2b2911feeef 100644
--- a/arch/x86/kernel/apic/msi.c
+++ b/arch/x86/kernel/apic/msi.c
@@ -263,12 +263,13 @@ void __init arch_init_msi_domain(struct irq_domain *parent)
 		msi_default_domain =
 			pci_msi_create_irq_domain(fn, &pci_msi_domain_info,
 						  parent);
-		irq_domain_free_fwnode(fn);
 	}
-	if (!msi_default_domain)
+	if (!msi_default_domain) {
+		irq_domain_free_fwnode(fn);
 		pr_warn("failed to initialize irqdomain for MSI/MSI-x.\n");
-	else
+	} else {
 		msi_default_domain->flags |= IRQ_DOMAIN_MSI_NOMASK_QUIRK;
+	}
 }
 
 #ifdef CONFIG_IRQ_REMAP
@@ -301,7 +302,8 @@ struct irq_domain *arch_create_remap_msi_irq_domain(struct irq_domain *parent,
 	if (!fn)
 		return NULL;
 	d = pci_msi_create_irq_domain(fn, &pci_msi_ir_domain_info, parent);
-	irq_domain_free_fwnode(fn);
+	if (!d)
+		irq_domain_free_fwnode(fn);
 	return d;
 }
 #endif
@@ -364,7 +366,8 @@ static struct irq_domain *dmar_get_irq_domain(void)
 	if (fn) {
 		dmar_domain = msi_create_irq_domain(fn, &dmar_msi_domain_info,
 						    x86_vector_domain);
-		irq_domain_free_fwnode(fn);
+		if (!dmar_domain)
+			irq_domain_free_fwnode(fn);
 	}
 out:
 	mutex_unlock(&dmar_lock);
@@ -489,7 +492,10 @@ struct irq_domain *hpet_create_irq_domain(int hpet_id)
 	}
 
 	d = msi_create_irq_domain(fn, domain_info, parent);
-	irq_domain_free_fwnode(fn);
+	if (!d) {
+		irq_domain_free_fwnode(fn);
+		kfree(domain_info);
+	}
 	return d;
 }
 
diff --git a/arch/x86/kernel/apic/vector.c b/arch/x86/kernel/apic/vector.c
index c48be6e1f676..dae32d948bf2 100644
--- a/arch/x86/kernel/apic/vector.c
+++ b/arch/x86/kernel/apic/vector.c
@@ -446,12 +446,10 @@ static int x86_vector_activate(struct irq_domain *dom, struct irq_data *irqd,
 	trace_vector_activate(irqd->irq, apicd->is_managed,
 			      apicd->can_reserve, reserve);
 
-	/* Nothing to do for fixed assigned vectors */
-	if (!apicd->can_reserve && !apicd->is_managed)
-		return 0;
-
 	raw_spin_lock_irqsave(&vector_lock, flags);
-	if (reserve || irqd_is_managed_and_shutdown(irqd))
+	if (!apicd->can_reserve && !apicd->is_managed)
+		assign_irq_vector_any_locked(irqd);
+	else if (reserve || irqd_is_managed_and_shutdown(irqd))
 		vector_assign_managed_shutdown(irqd);
 	else if (apicd->is_managed)
 		ret = activate_managed(irqd);
@@ -562,6 +560,10 @@ static int x86_vector_alloc_irqs(struct irq_domain *domain, unsigned int virq,
 		 * as that can corrupt the affinity move state.
 		 */
 		irqd_set_handle_enforce_irqctx(irqd);
+
+		/* Don't invoke affinity setter on deactivated interrupts */
+		irqd_set_affinity_on_activate(irqd);
+
 		/*
 		 * Legacy vectors are already assigned when the IOAPIC
 		 * takes them over. They stay on the same vector. This is
@@ -709,7 +711,6 @@ int __init arch_early_irq_init(void)
 	x86_vector_domain = irq_domain_create_tree(fn, &x86_vector_domain_ops,
 						   NULL);
 	BUG_ON(x86_vector_domain == NULL);
-	irq_domain_free_fwnode(fn);
 	irq_set_default_host(x86_vector_domain);
 
 	arch_init_msi_domain(x86_vector_domain);
@@ -775,20 +776,10 @@ void lapic_offline(void)
 static int apic_set_affinity(struct irq_data *irqd,
 			     const struct cpumask *dest, bool force)
 {
-	struct apic_chip_data *apicd = apic_chip_data(irqd);
 	int err;
 
-	/*
-	 * Core code can call here for inactive interrupts. For inactive
-	 * interrupts which use managed or reservation mode there is no
-	 * point in going through the vector assignment right now as the
-	 * activation will assign a vector which fits the destination
-	 * cpumask. Let the core code store the destination mask and be
-	 * done with it.
-	 */
-	if (!irqd_is_activated(irqd) &&
-	    (apicd->is_managed || apicd->can_reserve))
-		return IRQ_SET_MASK_OK;
+	if (WARN_ON_ONCE(!irqd_is_activated(irqd)))
+		return -EIO;
 
 	raw_spin_lock(&vector_lock);
 	cpumask_and(vector_searchmask, dest, cpu_online_mask);
diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index 69e70ed0f5e6..0b6eea3f54e6 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -24,8 +24,6 @@
 #include <asm/uv/uv.h>
 #include <asm/apic.h>
 
-static DEFINE_PER_CPU(int, x2apic_extra_bits);
-
 static enum uv_system_type	uv_system_type;
 static int			uv_hubbed_system;
 static int			uv_hubless_system;
@@ -40,7 +38,7 @@ static u8 oem_table_id[ACPI_OEM_TABLE_ID_SIZE + 1];
 static struct {
 	unsigned int apicid_shift;
 	unsigned int apicid_mask;
-	unsigned int socketid_shift;	/* aka pnode_shift for UV1/2/3 */
+	unsigned int socketid_shift;	/* aka pnode_shift for UV2/3 */
 	unsigned int pnode_mask;
 	unsigned int gpa_shift;
 	unsigned int gnode_shift;
@@ -48,8 +46,6 @@ static struct {
 
 static int uv_min_hub_revision_id;
 
-unsigned int uv_apicid_hibits;
-
 static struct apic apic_x2apic_uv_x;
 static struct uv_hub_info_s uv_hub_info_node0;
 
@@ -139,12 +135,8 @@ static void __init uv_tsc_check_sync(void)
 	/* Accommodate different UV arch BIOSes */
 	mmr = uv_early_read_mmr(UVH_TSC_SYNC_MMR);
 	mmr_shift =
-		is_uv1_hub() ? 0 :
 		is_uv2_hub() ? UVH_TSC_SYNC_SHIFT_UV2K : UVH_TSC_SYNC_SHIFT;
-	if (mmr_shift)
-		sync_state = (mmr >> mmr_shift) & UVH_TSC_SYNC_MASK;
-	else
-		sync_state = 0;
+	sync_state = (mmr >> mmr_shift) & UVH_TSC_SYNC_MASK;
 
 	switch (sync_state) {
 	case UVH_TSC_SYNC_VALID:
@@ -223,21 +215,6 @@ static void __init early_get_apic_socketid_shift(void)
 	pr_info("UV: socketid_shift:%d pnode_mask:0x%x\n", uv_cpuid.socketid_shift, uv_cpuid.pnode_mask);
 }
 
-/*
- * Add an extra bit as dictated by bios to the destination apicid of
- * interrupts potentially passing through the UV HUB.  This prevents
- * a deadlock between interrupts and IO port operations.
- */
-static void __init uv_set_apicid_hibit(void)
-{
-	union uv1h_lb_target_physical_apic_id_mask_u apicid_mask;
-
-	if (is_uv1_hub()) {
-		apicid_mask.v = uv_early_read_mmr(UV1H_LB_TARGET_PHYSICAL_APIC_ID_MASK);
-		uv_apicid_hibits = apicid_mask.s1.bit_enables & UV_APICID_HIBIT_MASK;
-	}
-}
-
 static void __init uv_stringify(int len, char *to, char *from)
 {
 	/* Relies on 'to' being NULL chars so result will be NULL terminated */
@@ -280,36 +257,25 @@ static int __init uv_acpi_madt_oem_check(char *_oem_id, char *_oem_table_id)
 
 	/*
 	 * Determine UV arch type.
-	 *   SGI:  UV100/1000
 	 *   SGI2: UV2000/3000
 	 *   SGI3: UV300 (truncated to 4 chars because of different varieties)
 	 *   SGI4: UV400 (truncated to 4 chars because of different varieties)
 	 */
-	uv_hub_info->hub_revision =
-		!strncmp(oem_id, "SGI4", 4) ? UV4_HUB_REVISION_BASE :
-		!strncmp(oem_id, "SGI3", 4) ? UV3_HUB_REVISION_BASE :
-		!strcmp(oem_id, "SGI2") ? UV2_HUB_REVISION_BASE :
-		!strcmp(oem_id, "SGI") ? UV1_HUB_REVISION_BASE : 0;
-
-	if (uv_hub_info->hub_revision == 0)
-		goto badbios;
-
-	switch (uv_hub_info->hub_revision) {
-	case UV4_HUB_REVISION_BASE:
+	if (!strncmp(oem_id, "SGI4", 4)) {
+		uv_hub_info->hub_revision = UV4_HUB_REVISION_BASE;
 		uv_hubbed_system = 0x11;
-		break;
 
-	case UV3_HUB_REVISION_BASE:
+	} else if (!strncmp(oem_id, "SGI3", 4)) {
+		uv_hub_info->hub_revision = UV3_HUB_REVISION_BASE;
 		uv_hubbed_system = 0x9;
-		break;
 
-	case UV2_HUB_REVISION_BASE:
+	} else if (!strcmp(oem_id, "SGI2")) {
+		uv_hub_info->hub_revision = UV2_HUB_REVISION_BASE;
 		uv_hubbed_system = 0x5;
-		break;
 
-	case UV1_HUB_REVISION_BASE:
-		uv_hubbed_system = 0x3;
-		break;
+	} else {
+		uv_hub_info->hub_revision = 0;
+		goto badbios;
 	}
 
 	pnodeid = early_get_pnodeid();
@@ -323,14 +289,6 @@ static int __init uv_acpi_madt_oem_check(char *_oem_id, char *_oem_table_id)
 		uv_system_type = UV_X2APIC;
 		uv_apic = 0;
 
-	} else if (!strcmp(oem_table_id, "UVH")) {
-		/* Only UV1 systems: */
-		uv_system_type = UV_NON_UNIQUE_APIC;
-		x86_platform.legacy.warm_reset = 0;
-		__this_cpu_write(x2apic_extra_bits, pnodeid << uvh_apicid.s.pnode_shift);
-		uv_set_apicid_hibit();
-		uv_apic = 1;
-
 	} else if (!strcmp(oem_table_id, "UVL")) {
 		/* Only used for very small systems:  */
 		uv_system_type = UV_LEGACY_APIC;
@@ -347,7 +305,7 @@ static int __init uv_acpi_madt_oem_check(char *_oem_id, char *_oem_table_id)
 
 badbios:
 	pr_err("UV: OEM_ID:%s OEM_TABLE_ID:%s\n", oem_id, oem_table_id);
-	pr_err("Current BIOS not supported, update kernel and/or BIOS\n");
+	pr_err("Current UV Type or BIOS not supported\n");
 	BUG();
 }
 
@@ -545,7 +503,6 @@ static int uv_wakeup_secondary(int phys_apicid, unsigned long start_rip)
 	int pnode;
 
 	pnode = uv_apicid_to_pnode(phys_apicid);
-	phys_apicid |= uv_apicid_hibits;
 
 	val = (1UL << UVH_IPI_INT_SEND_SHFT) |
 	    (phys_apicid << UVH_IPI_INT_APIC_ID_SHFT) |
@@ -576,7 +533,7 @@ static void uv_send_IPI_one(int cpu, int vector)
 		dmode = dest_Fixed;
 
 	val = (1UL << UVH_IPI_INT_SEND_SHFT) |
-		((apicid | uv_apicid_hibits) << UVH_IPI_INT_APIC_ID_SHFT) |
+		(apicid << UVH_IPI_INT_APIC_ID_SHFT) |
 		(dmode << UVH_IPI_INT_DELIVERY_MODE_SHFT) |
 		(vector << UVH_IPI_INT_VECTOR_SHFT);
 
@@ -634,22 +591,16 @@ static void uv_init_apic_ldr(void)
 
 static u32 apic_uv_calc_apicid(unsigned int cpu)
 {
-	return apic_default_calc_apicid(cpu) | uv_apicid_hibits;
+	return apic_default_calc_apicid(cpu);
 }
 
-static unsigned int x2apic_get_apic_id(unsigned long x)
+static unsigned int x2apic_get_apic_id(unsigned long id)
 {
-	unsigned int id;
-
-	WARN_ON(preemptible() && num_online_cpus() > 1);
-	id = x | __this_cpu_read(x2apic_extra_bits);
-
 	return id;
 }
 
 static u32 set_apic_id(unsigned int id)
 {
-	/* CHECKME: Do we need to mask out the xapic extra bits? */
 	return id;
 }
 
@@ -721,11 +672,6 @@ static struct apic apic_x2apic_uv_x __ro_after_init = {
 	.safe_wait_icr_idle		= native_safe_x2apic_wait_icr_idle,
 };
 
-static void set_x2apic_extra_bits(int pnode)
-{
-	__this_cpu_write(x2apic_extra_bits, pnode << uvh_apicid.s.pnode_shift);
-}
-
 #define	UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_LENGTH	3
 #define DEST_SHIFT UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR_DEST_BASE_SHFT
 
@@ -920,15 +866,7 @@ static __init void map_mmioh_high(int min_pnode, int max_pnode)
 		return;
 	}
 
-	if (is_uv1_hub()) {
-		mmr	= UV1H_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR;
-		shift	= UV1H_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_BASE_SHFT;
-		mmioh.v	= uv_read_local_mmr(mmr);
-		enable	= !!mmioh.s1.enable;
-		base	= mmioh.s1.base;
-		m_io	= mmioh.s1.m_io;
-		n_io	= mmioh.s1.n_io;
-	} else if (is_uv2_hub()) {
+	if (is_uv2_hub()) {
 		mmr	= UV2H_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR;
 		shift	= UV2H_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_BASE_SHFT;
 		mmioh.v	= uv_read_local_mmr(mmr);
@@ -936,16 +874,15 @@ static __init void map_mmioh_high(int min_pnode, int max_pnode)
 		base	= mmioh.s2.base;
 		m_io	= mmioh.s2.m_io;
 		n_io	= mmioh.s2.n_io;
-	} else {
-		return;
-	}
 
-	if (enable) {
-		max_pnode &= (1 << n_io) - 1;
-		pr_info("UV: base:0x%lx shift:%d N_IO:%d M_IO:%d max_pnode:0x%x\n", base, shift, m_io, n_io, max_pnode);
-		map_high("MMIOH", base, shift, m_io, max_pnode, map_uc);
-	} else {
-		pr_info("UV: MMIOH disabled\n");
+		if (enable) {
+			max_pnode &= (1 << n_io) - 1;
+			pr_info("UV: base:0x%lx shift:%d N_IO:%d M_IO:%d max_pnode:0x%x\n",
+				base, shift, m_io, n_io, max_pnode);
+			map_high("MMIOH", base, shift, m_io, max_pnode, map_uc);
+		} else {
+			pr_info("UV: MMIOH disabled\n");
+		}
 	}
 }
 
@@ -1081,9 +1018,6 @@ void uv_cpu_init(void)
 		return;
 
 	uv_hub_info->nr_online_cpus++;
-
-	if (get_uv_system_type() == UV_NON_UNIQUE_APIC)
-		set_x2apic_extra_bits(uv_hub_info->pnode);
 }
 
 struct mn {
@@ -1114,9 +1048,6 @@ static void get_mn(struct mn *mnp)
 	} else if (is_uv2_hub()) {
 		mnp->m_val	= m_n_config.s2.m_skt;
 		mnp->n_lshift	= mnp->m_val == 40 ? 40 : 39;
-	} else if (is_uv1_hub()) {
-		mnp->m_val	= m_n_config.s1.m_skt;
-		mnp->n_lshift	= mnp->m_val;
 	}
 	mnp->m_shift = mnp->m_val ? 64 - mnp->m_val : 0;
 }
@@ -1318,7 +1249,7 @@ static void __init build_socket_tables(void)
 	size_t bytes;
 
 	if (!gre) {
-		if (is_uv1_hub() || is_uv2_hub() || is_uv3_hub()) {
+		if (is_uv2_hub() || is_uv3_hub()) {
 			pr_info("UV: No UVsystab socket table, ignoring\n");
 			return;
 		}
@@ -1500,8 +1431,7 @@ static void __init uv_system_init_hub(void)
 	unsigned short min_pnode = 9999, max_pnode = 0;
 	char *hub = is_uv4_hub() ? "UV400" :
 		    is_uv3_hub() ? "UV300" :
-		    is_uv2_hub() ? "UV2000/3000" :
-		    is_uv1_hub() ? "UV100/1000" : NULL;
+		    is_uv2_hub() ? "UV2000/3000" : NULL;
 
 	if (!hub) {
 		pr_err("UV: Unknown/unsupported UV hub\n");
diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c
index 0b71970d2d3d..f0b743a2fe9c 100644
--- a/arch/x86/kernel/cpu/bugs.c
+++ b/arch/x86/kernel/cpu/bugs.c
@@ -543,14 +543,12 @@ static void __init spectre_v1_select_mitigation(void)
 		 * If FSGSBASE is enabled, the user can put a kernel address in
 		 * GS, in which case SMAP provides no protection.
 		 *
-		 * [ NOTE: Don't check for X86_FEATURE_FSGSBASE until the
-		 *	   FSGSBASE enablement patches have been merged. ]
-		 *
 		 * If FSGSBASE is disabled, the user can only put a user space
 		 * address in GS.  That makes an attack harder, but still
 		 * possible if there's no SMAP protection.
 		 */
-		if (!smap_works_speculatively()) {
+		if (boot_cpu_has(X86_FEATURE_FSGSBASE) ||
+		    !smap_works_speculatively()) {
 			/*
 			 * Mitigation can be provided from SWAPGS itself or
 			 * PTI as the CR3 write in the Meltdown mitigation
@@ -763,10 +761,12 @@ spectre_v2_user_select_mitigation(enum spectre_v2_mitigation_cmd v2_cmd)
 	}
 
 	/*
-	 * If enhanced IBRS is enabled or SMT impossible, STIBP is not
+	 * If no STIBP, enhanced IBRS is enabled or SMT impossible, STIBP is not
 	 * required.
 	 */
-	if (!smt_possible || spectre_v2_enabled == SPECTRE_V2_IBRS_ENHANCED)
+	if (!boot_cpu_has(X86_FEATURE_STIBP) ||
+	    !smt_possible ||
+	    spectre_v2_enabled == SPECTRE_V2_IBRS_ENHANCED)
 		return;
 
 	/*
@@ -778,12 +778,6 @@ spectre_v2_user_select_mitigation(enum spectre_v2_mitigation_cmd v2_cmd)
 	    boot_cpu_has(X86_FEATURE_AMD_STIBP_ALWAYS_ON))
 		mode = SPECTRE_V2_USER_STRICT_PREFERRED;
 
-	/*
-	 * If STIBP is not available, clear the STIBP mode.
-	 */
-	if (!boot_cpu_has(X86_FEATURE_STIBP))
-		mode = SPECTRE_V2_USER_NONE;
-
 	spectre_v2_user_stibp = mode;
 
 set_mode:
@@ -1270,7 +1264,6 @@ static int ib_prctl_set(struct task_struct *task, unsigned long ctrl)
 		 * Indirect branch speculation is always disabled in strict
 		 * mode. It can neither be enabled if it was force-disabled
 		 * by a  previous prctl call.
-
 		 */
 		if (spectre_v2_user_ibpb == SPECTRE_V2_USER_STRICT ||
 		    spectre_v2_user_stibp == SPECTRE_V2_USER_STRICT ||
diff --git a/arch/x86/kernel/cpu/centaur.c b/arch/x86/kernel/cpu/centaur.c
index 426792565d86..c5cf336e5077 100644
--- a/arch/x86/kernel/cpu/centaur.c
+++ b/arch/x86/kernel/cpu/centaur.c
@@ -3,6 +3,7 @@
 #include <linux/sched.h>
 #include <linux/sched/clock.h>
 
+#include <asm/cpu.h>
 #include <asm/cpufeature.h>
 #include <asm/e820/api.h>
 #include <asm/mtrr.h>
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 043d93cdcaad..965474d78cef 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -347,6 +347,9 @@ out:
 	cr4_clear_bits(X86_CR4_UMIP);
 }
 
+/* These bits should not change their value after CPU init is finished. */
+static const unsigned long cr4_pinned_mask =
+	X86_CR4_SMEP | X86_CR4_SMAP | X86_CR4_UMIP | X86_CR4_FSGSBASE;
 static DEFINE_STATIC_KEY_FALSE_RO(cr_pinning);
 static unsigned long cr4_pinned_bits __ro_after_init;
 
@@ -371,20 +374,20 @@ EXPORT_SYMBOL(native_write_cr0);
 
 void native_write_cr4(unsigned long val)
 {
-	unsigned long bits_missing = 0;
+	unsigned long bits_changed = 0;
 
 set_register:
 	asm volatile("mov %0,%%cr4": "+r" (val), "+m" (cr4_pinned_bits));
 
 	if (static_branch_likely(&cr_pinning)) {
-		if (unlikely((val & cr4_pinned_bits) != cr4_pinned_bits)) {
-			bits_missing = ~val & cr4_pinned_bits;
-			val |= bits_missing;
+		if (unlikely((val & cr4_pinned_mask) != cr4_pinned_bits)) {
+			bits_changed = (val & cr4_pinned_mask) ^ cr4_pinned_bits;
+			val = (val & ~cr4_pinned_mask) | cr4_pinned_bits;
 			goto set_register;
 		}
-		/* Warn after we've set the missing bits. */
-		WARN_ONCE(bits_missing, "CR4 bits went missing: %lx!?\n",
-			  bits_missing);
+		/* Warn after we've corrected the changed bits. */
+		WARN_ONCE(bits_changed, "pinned CR4 bits changed: 0x%lx!?\n",
+			  bits_changed);
 	}
 }
 #if IS_MODULE(CONFIG_LKDTM)
@@ -419,7 +422,7 @@ void cr4_init(void)
 	if (boot_cpu_has(X86_FEATURE_PCID))
 		cr4 |= X86_CR4_PCIDE;
 	if (static_branch_likely(&cr_pinning))
-		cr4 |= cr4_pinned_bits;
+		cr4 = (cr4 & ~cr4_pinned_mask) | cr4_pinned_bits;
 
 	__write_cr4(cr4);
 
@@ -434,13 +437,26 @@ void cr4_init(void)
  */
 static void __init setup_cr_pinning(void)
 {
-	unsigned long mask;
-
-	mask = (X86_CR4_SMEP | X86_CR4_SMAP | X86_CR4_UMIP);
-	cr4_pinned_bits = this_cpu_read(cpu_tlbstate.cr4) & mask;
+	cr4_pinned_bits = this_cpu_read(cpu_tlbstate.cr4) & cr4_pinned_mask;
 	static_key_enable(&cr_pinning.key);
 }
 
+static __init int x86_nofsgsbase_setup(char *arg)
+{
+	/* Require an exact match without trailing characters. */
+	if (strlen(arg))
+		return 0;
+
+	/* Do not emit a message if the feature is not present. */
+	if (!boot_cpu_has(X86_FEATURE_FSGSBASE))
+		return 1;
+
+	setup_clear_cpu_cap(X86_FEATURE_FSGSBASE);
+	pr_info("FSGSBASE disabled via kernel command line\n");
+	return 1;
+}
+__setup("nofsgsbase", x86_nofsgsbase_setup);
+
 /*
  * Protection Keys are not available in 32-bit mode.
  */
@@ -1495,6 +1511,12 @@ static void identify_cpu(struct cpuinfo_x86 *c)
 	setup_smap(c);
 	setup_umip(c);
 
+	/* Enable FSGSBASE instructions if available. */
+	if (cpu_has(c, X86_FEATURE_FSGSBASE)) {
+		cr4_set_bits(X86_CR4_FSGSBASE);
+		elf_hwcap2 |= HWCAP2_FSGSBASE;
+	}
+
 	/*
 	 * The vendor-specific functions might have changed features.
 	 * Now we do "generic changes."
diff --git a/arch/x86/kernel/cpu/cpu.h b/arch/x86/kernel/cpu/cpu.h
index fb538fccd24c..9d033693519a 100644
--- a/arch/x86/kernel/cpu/cpu.h
+++ b/arch/x86/kernel/cpu/cpu.h
@@ -81,8 +81,4 @@ extern void update_srbds_msr(void);
 
 extern u64 x86_read_arch_cap_msr(void);
 
-#ifdef CONFIG_IA32_FEAT_CTL
-void init_ia32_feat_ctl(struct cpuinfo_x86 *c);
-#endif
-
 #endif /* ARCH_X86_CPU_H */
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index c25a67a34bd3..b6b7b38dff5f 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -50,6 +50,13 @@ static enum split_lock_detect_state sld_state __ro_after_init = sld_off;
 static u64 msr_test_ctrl_cache __ro_after_init;
 
 /*
+ * With a name like MSR_TEST_CTL it should go without saying, but don't touch
+ * MSR_TEST_CTL unless the CPU is one of the whitelisted models.  Writing it
+ * on CPUs that do not support SLD can cause fireworks, even when writing '0'.
+ */
+static bool cpu_model_supports_sld __ro_after_init;
+
+/*
  * Processors which have self-snooping capability can handle conflicting
  * memory type across CPUs by snooping its own cache. However, there exists
  * CPU models in which having conflicting memory types still leads to
@@ -1071,7 +1078,8 @@ static void sld_update_msr(bool on)
 
 static void split_lock_init(void)
 {
-	split_lock_verify_msr(sld_state != sld_off);
+	if (cpu_model_supports_sld)
+		split_lock_verify_msr(sld_state != sld_off);
 }
 
 static void split_lock_warn(unsigned long ip)
@@ -1148,6 +1156,8 @@ static const struct x86_cpu_id split_lock_cpu_ids[] __initconst = {
 	X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT_L,	1),
 	X86_MATCH_INTEL_FAM6_MODEL(TIGERLAKE_L,		1),
 	X86_MATCH_INTEL_FAM6_MODEL(TIGERLAKE,		1),
+	X86_MATCH_INTEL_FAM6_MODEL(SAPPHIRERAPIDS_X,	1),
+	X86_MATCH_INTEL_FAM6_MODEL(ALDERLAKE,		1),
 	{}
 };
 
@@ -1177,5 +1187,6 @@ void __init cpu_set_core_cap_bits(struct cpuinfo_x86 *c)
 		return;
 	}
 
+	cpu_model_supports_sld = true;
 	split_lock_setup();
 }
diff --git a/arch/x86/kernel/cpu/mce/core.c b/arch/x86/kernel/cpu/mce/core.c
index ce9120c4f740..f43a78bde670 100644
--- a/arch/x86/kernel/cpu/mce/core.c
+++ b/arch/x86/kernel/cpu/mce/core.c
@@ -42,6 +42,7 @@
 #include <linux/export.h>
 #include <linux/jump_label.h>
 #include <linux/set_memory.h>
+#include <linux/sync_core.h>
 #include <linux/task_work.h>
 #include <linux/hardirq.h>
 
@@ -244,6 +245,8 @@ static void __print_mce(struct mce *m)
 		pr_cont("ADDR %llx ", m->addr);
 	if (m->misc)
 		pr_cont("MISC %llx ", m->misc);
+	if (m->ppin)
+		pr_cont("PPIN %llx ", m->ppin);
 
 	if (mce_flags.smca) {
 		if (m->synd)
@@ -1083,7 +1086,7 @@ static noinstr bool mce_check_crashing_cpu(void)
 {
 	unsigned int cpu = smp_processor_id();
 
-	if (cpu_is_offline(cpu) ||
+	if (arch_cpu_is_offline(cpu) ||
 	    (crashing_cpu != -1 && crashing_cpu != cpu)) {
 		u64 mcgstatus;
 
@@ -1212,7 +1215,7 @@ static void kill_me_maybe(struct callback_head *cb)
  * backing the user stack, tracing that reads the user stack will cause
  * potentially infinite recursion.
  */
-void noinstr do_machine_check(struct pt_regs *regs)
+noinstr void do_machine_check(struct pt_regs *regs)
 {
 	DECLARE_BITMAP(valid_banks, MAX_NR_BANKS);
 	DECLARE_BITMAP(toclear, MAX_NR_BANKS);
@@ -1901,6 +1904,8 @@ void (*machine_check_vector)(struct pt_regs *) = unexpected_machine_check;
 
 static __always_inline void exc_machine_check_kernel(struct pt_regs *regs)
 {
+	WARN_ON_ONCE(user_mode(regs));
+
 	/*
 	 * Only required when from kernel mode. See
 	 * mce_check_crashing_cpu() for details.
@@ -1925,11 +1930,11 @@ static __always_inline void exc_machine_check_kernel(struct pt_regs *regs)
 
 static __always_inline void exc_machine_check_user(struct pt_regs *regs)
 {
-	idtentry_enter_user(regs);
+	irqentry_enter_from_user_mode(regs);
 	instrumentation_begin();
 	machine_check_vector(regs);
 	instrumentation_end();
-	idtentry_exit_user(regs);
+	irqentry_exit_to_user_mode(regs);
 }
 
 #ifdef CONFIG_X86_64
@@ -1954,7 +1959,7 @@ DEFINE_IDTENTRY_MCE_USER(exc_machine_check)
 }
 #else
 /* 32bit unified entry point */
-DEFINE_IDTENTRY_MCE(exc_machine_check)
+DEFINE_IDTENTRY_RAW(exc_machine_check)
 {
 	unsigned long dr7;
 
diff --git a/arch/x86/kernel/cpu/mce/dev-mcelog.c b/arch/x86/kernel/cpu/mce/dev-mcelog.c
index 43c466020ed5..03e51053592a 100644
--- a/arch/x86/kernel/cpu/mce/dev-mcelog.c
+++ b/arch/x86/kernel/cpu/mce/dev-mcelog.c
@@ -345,7 +345,7 @@ static __init int dev_mcelog_init_device(void)
 	int err;
 
 	mce_log_len = max(MCE_LOG_MIN_LEN, num_online_cpus());
-	mcelog = kzalloc(sizeof(*mcelog) + mce_log_len * sizeof(struct mce), GFP_KERNEL);
+	mcelog = kzalloc(struct_size(mcelog, entry, mce_log_len), GFP_KERNEL);
 	if (!mcelog)
 		return -ENOMEM;
 
diff --git a/arch/x86/kernel/cpu/mce/inject.c b/arch/x86/kernel/cpu/mce/inject.c
index 0593b192eb8f..7843ab3fde09 100644
--- a/arch/x86/kernel/cpu/mce/inject.c
+++ b/arch/x86/kernel/cpu/mce/inject.c
@@ -511,7 +511,7 @@ static void do_inject(void)
 	 */
 	if (inj_type == DFR_INT_INJ) {
 		i_mce.status |= MCI_STATUS_DEFERRED;
-		i_mce.status |= (i_mce.status & ~MCI_STATUS_UC);
+		i_mce.status &= ~MCI_STATUS_UC;
 	}
 
 	/*
diff --git a/arch/x86/kernel/cpu/microcode/core.c b/arch/x86/kernel/cpu/microcode/core.c
index baec68b7e010..ec6f0415bc6d 100644
--- a/arch/x86/kernel/cpu/microcode/core.c
+++ b/arch/x86/kernel/cpu/microcode/core.c
@@ -145,7 +145,6 @@ extern struct builtin_fw __end_builtin_fw[];
 
 bool get_builtin_firmware(struct cpio_data *cd, const char *name)
 {
-#ifdef CONFIG_FW_LOADER
 	struct builtin_fw *b_fw;
 
 	for (b_fw = __start_builtin_fw; b_fw != __end_builtin_fw; b_fw++) {
@@ -155,7 +154,6 @@ bool get_builtin_firmware(struct cpio_data *cd, const char *name)
 			return true;
 		}
 	}
-#endif
 	return false;
 }
 
diff --git a/arch/x86/kernel/cpu/resctrl/core.c b/arch/x86/kernel/cpu/resctrl/core.c
index 12f967c6b603..6a9df71c1b9e 100644
--- a/arch/x86/kernel/cpu/resctrl/core.c
+++ b/arch/x86/kernel/cpu/resctrl/core.c
@@ -981,10 +981,10 @@ void resctrl_cpu_detect(struct cpuinfo_x86 *c)
 
 		c->x86_cache_max_rmid  = ecx;
 		c->x86_cache_occ_scale = ebx;
-		if (c->x86_vendor == X86_VENDOR_INTEL)
-			c->x86_cache_mbm_width_offset = eax & 0xff;
-		else
-			c->x86_cache_mbm_width_offset = -1;
+		c->x86_cache_mbm_width_offset = eax & 0xff;
+
+		if (c->x86_vendor == X86_VENDOR_AMD && !c->x86_cache_mbm_width_offset)
+			c->x86_cache_mbm_width_offset = MBM_CNTR_WIDTH_OFFSET_AMD;
 	}
 }
 
diff --git a/arch/x86/kernel/cpu/resctrl/internal.h b/arch/x86/kernel/cpu/resctrl/internal.h
index f20a47d120b1..5ffa32256b3b 100644
--- a/arch/x86/kernel/cpu/resctrl/internal.h
+++ b/arch/x86/kernel/cpu/resctrl/internal.h
@@ -37,6 +37,7 @@
 #define MBA_IS_LINEAR			0x4
 #define MBA_MAX_MBPS			U32_MAX
 #define MAX_MBA_BW_AMD			0x800
+#define MBM_CNTR_WIDTH_OFFSET_AMD	20
 
 #define RMID_VAL_ERROR			BIT_ULL(63)
 #define RMID_VAL_UNAVAIL		BIT_ULL(62)
diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
index 23b4b61319d3..3f844f14fc0a 100644
--- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c
+++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
@@ -1117,6 +1117,7 @@ static int rdt_cdp_peer_get(struct rdt_resource *r, struct rdt_domain *d,
 	_d_cdp = rdt_find_domain(_r_cdp, d->id, NULL);
 	if (WARN_ON(IS_ERR_OR_NULL(_d_cdp))) {
 		_r_cdp = NULL;
+		_d_cdp = NULL;
 		ret = -EINVAL;
 	}
 
diff --git a/arch/x86/kernel/cpu/umwait.c b/arch/x86/kernel/cpu/umwait.c
index 300e3fd5ade3..ec8064c0ae03 100644
--- a/arch/x86/kernel/cpu/umwait.c
+++ b/arch/x86/kernel/cpu/umwait.c
@@ -18,12 +18,6 @@
  */
 static u32 umwait_control_cached = UMWAIT_CTRL_VAL(100000, UMWAIT_C02_ENABLE);
 
-u32 get_umwait_control_msr(void)
-{
-	return umwait_control_cached;
-}
-EXPORT_SYMBOL_GPL(get_umwait_control_msr);
-
 /*
  * Cache the original IA32_UMWAIT_CONTROL MSR value which is configured by
  * hardware or BIOS before kernel boot.
diff --git a/arch/x86/kernel/cpu/zhaoxin.c b/arch/x86/kernel/cpu/zhaoxin.c
index df1358ba622b..05fa4ef63490 100644
--- a/arch/x86/kernel/cpu/zhaoxin.c
+++ b/arch/x86/kernel/cpu/zhaoxin.c
@@ -2,6 +2,7 @@
 #include <linux/sched.h>
 #include <linux/sched/clock.h>
 
+#include <asm/cpu.h>
 #include <asm/cpufeature.h>
 
 #include "cpu.h"
diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c
index 456511b2284e..48ce44576947 100644
--- a/arch/x86/kernel/dumpstack.c
+++ b/arch/x86/kernel/dumpstack.c
@@ -71,6 +71,22 @@ static void printk_stack_address(unsigned long address, int reliable,
 	printk("%s %s%pB\n", log_lvl, reliable ? "" : "? ", (void *)address);
 }
 
+static int copy_code(struct pt_regs *regs, u8 *buf, unsigned long src,
+		     unsigned int nbytes)
+{
+	if (!user_mode(regs))
+		return copy_from_kernel_nofault(buf, (u8 *)src, nbytes);
+
+	/*
+	 * Make sure userspace isn't trying to trick us into dumping kernel
+	 * memory by pointing the userspace instruction pointer at it.
+	 */
+	if (__chk_range_not_ok(src, nbytes, TASK_SIZE_MAX))
+		return -EINVAL;
+
+	return copy_from_user_nmi(buf, (void __user *)src, nbytes);
+}
+
 /*
  * There are a couple of reasons for the 2/3rd prologue, courtesy of Linus:
  *
@@ -97,17 +113,8 @@ void show_opcodes(struct pt_regs *regs, const char *loglvl)
 #define OPCODE_BUFSIZE (PROLOGUE_SIZE + 1 + EPILOGUE_SIZE)
 	u8 opcodes[OPCODE_BUFSIZE];
 	unsigned long prologue = regs->ip - PROLOGUE_SIZE;
-	bool bad_ip;
-
-	/*
-	 * Make sure userspace isn't trying to trick us into dumping kernel
-	 * memory by pointing the userspace instruction pointer at it.
-	 */
-	bad_ip = user_mode(regs) &&
-		__chk_range_not_ok(prologue, OPCODE_BUFSIZE, TASK_SIZE_MAX);
 
-	if (bad_ip || probe_kernel_read(opcodes, (u8 *)prologue,
-					OPCODE_BUFSIZE)) {
+	if (copy_code(regs, opcodes, prologue, sizeof(opcodes))) {
 		printk("%sCode: Bad RIP value.\n", loglvl);
 	} else {
 		printk("%sCode: %" __stringify(PROLOGUE_SIZE) "ph <%02x> %"
@@ -126,15 +133,15 @@ void show_ip(struct pt_regs *regs, const char *loglvl)
 	show_opcodes(regs, loglvl);
 }
 
-void show_iret_regs(struct pt_regs *regs)
+void show_iret_regs(struct pt_regs *regs, const char *log_lvl)
 {
-	show_ip(regs, KERN_DEFAULT);
-	printk(KERN_DEFAULT "RSP: %04x:%016lx EFLAGS: %08lx", (int)regs->ss,
+	show_ip(regs, log_lvl);
+	printk("%sRSP: %04x:%016lx EFLAGS: %08lx", log_lvl, (int)regs->ss,
 		regs->sp, regs->flags);
 }
 
 static void show_regs_if_on_stack(struct stack_info *info, struct pt_regs *regs,
-				  bool partial)
+				  bool partial, const char *log_lvl)
 {
 	/*
 	 * These on_stack() checks aren't strictly necessary: the unwind code
@@ -146,7 +153,7 @@ static void show_regs_if_on_stack(struct stack_info *info, struct pt_regs *regs,
 	 * they can be printed in the right context.
 	 */
 	if (!partial && on_stack(info, regs, sizeof(*regs))) {
-		__show_regs(regs, SHOW_REGS_SHORT);
+		__show_regs(regs, SHOW_REGS_SHORT, log_lvl);
 
 	} else if (partial && on_stack(info, (void *)regs + IRET_FRAME_OFFSET,
 				       IRET_FRAME_SIZE)) {
@@ -155,7 +162,7 @@ static void show_regs_if_on_stack(struct stack_info *info, struct pt_regs *regs,
 		 * full pt_regs might not have been saved yet.  In that case
 		 * just print the iret frame.
 		 */
-		show_iret_regs(regs);
+		show_iret_regs(regs, log_lvl);
 	}
 }
 
@@ -210,7 +217,7 @@ void show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs,
 			printk("%s <%s>\n", log_lvl, stack_name);
 
 		if (regs)
-			show_regs_if_on_stack(&stack_info, regs, partial);
+			show_regs_if_on_stack(&stack_info, regs, partial, log_lvl);
 
 		/*
 		 * Scan the stack, printing any text addresses we find.  At the
@@ -271,7 +278,7 @@ next:
 			/* if the frame has entry regs, print them */
 			regs = unwind_get_entry_regs(&state, &partial);
 			if (regs)
-				show_regs_if_on_stack(&stack_info, regs, partial);
+				show_regs_if_on_stack(&stack_info, regs, partial, log_lvl);
 		}
 
 		if (stack_name)
@@ -345,7 +352,7 @@ void oops_end(unsigned long flags, struct pt_regs *regs, int signr)
 	oops_exit();
 
 	/* Executive summary in case the oops scrolled away */
-	__show_regs(&exec_summary_regs, SHOW_REGS_ALL);
+	__show_regs(&exec_summary_regs, SHOW_REGS_ALL, KERN_DEFAULT);
 
 	if (!signr)
 		return;
@@ -437,9 +444,12 @@ void die_addr(const char *str, struct pt_regs *regs, long err, long gp_addr)
 
 void show_regs(struct pt_regs *regs)
 {
+	enum show_regs_mode print_kernel_regs;
+
 	show_regs_print_info(KERN_DEFAULT);
 
-	__show_regs(regs, user_mode(regs) ? SHOW_REGS_USER : SHOW_REGS_ALL);
+	print_kernel_regs = user_mode(regs) ? SHOW_REGS_USER : SHOW_REGS_ALL;
+	__show_regs(regs, print_kernel_regs, KERN_DEFAULT);
 
 	/*
 	 * When in-kernel, we also print out the stack at the time of the fault..
diff --git a/arch/x86/kernel/fpu/core.c b/arch/x86/kernel/fpu/core.c
index 06c818967bb6..eb86a2b831b1 100644
--- a/arch/x86/kernel/fpu/core.c
+++ b/arch/x86/kernel/fpu/core.c
@@ -82,6 +82,45 @@ bool irq_fpu_usable(void)
 }
 EXPORT_SYMBOL(irq_fpu_usable);
 
+/*
+ * These must be called with preempt disabled. Returns
+ * 'true' if the FPU state is still intact and we can
+ * keep registers active.
+ *
+ * The legacy FNSAVE instruction cleared all FPU state
+ * unconditionally, so registers are essentially destroyed.
+ * Modern FPU state can be kept in registers, if there are
+ * no pending FP exceptions.
+ */
+int copy_fpregs_to_fpstate(struct fpu *fpu)
+{
+	if (likely(use_xsave())) {
+		copy_xregs_to_kernel(&fpu->state.xsave);
+
+		/*
+		 * AVX512 state is tracked here because its use is
+		 * known to slow the max clock speed of the core.
+		 */
+		if (fpu->state.xsave.header.xfeatures & XFEATURE_MASK_AVX512)
+			fpu->avx512_timestamp = jiffies;
+		return 1;
+	}
+
+	if (likely(use_fxsr())) {
+		copy_fxregs_to_kernel(fpu);
+		return 1;
+	}
+
+	/*
+	 * Legacy FPU register saving, FNSAVE always clears FPU registers,
+	 * so we have to mark them inactive:
+	 */
+	asm volatile("fnsave %[fp]; fwait" : [fp] "=m" (fpu->state.fsave));
+
+	return 0;
+}
+EXPORT_SYMBOL(copy_fpregs_to_fpstate);
+
 void kernel_fpu_begin(void)
 {
 	preempt_disable();
@@ -101,6 +140,12 @@ void kernel_fpu_begin(void)
 		copy_fpregs_to_fpstate(&current->thread.fpu);
 	}
 	__cpu_invalidate_fpregs_state();
+
+	if (boot_cpu_has(X86_FEATURE_XMM))
+		ldmxcsr(MXCSR_DEFAULT);
+
+	if (boot_cpu_has(X86_FEATURE_FPU))
+		asm volatile ("fninit");
 }
 EXPORT_SYMBOL_GPL(kernel_fpu_begin);
 
diff --git a/arch/x86/kernel/fpu/xstate.c b/arch/x86/kernel/fpu/xstate.c
index bda2e5eaca0e..be2a68a09d19 100644
--- a/arch/x86/kernel/fpu/xstate.c
+++ b/arch/x86/kernel/fpu/xstate.c
@@ -233,8 +233,10 @@ void fpu__init_cpu_xstate(void)
 	/*
 	 * MSR_IA32_XSS sets supervisor states managed by XSAVES.
 	 */
-	if (boot_cpu_has(X86_FEATURE_XSAVES))
-		wrmsrl(MSR_IA32_XSS, xfeatures_mask_supervisor());
+	if (boot_cpu_has(X86_FEATURE_XSAVES)) {
+		wrmsrl(MSR_IA32_XSS, xfeatures_mask_supervisor() |
+				     xfeatures_mask_dynamic());
+	}
 }
 
 static bool xfeature_enabled(enum xfeature xfeature)
@@ -486,7 +488,7 @@ static int xfeature_uncompacted_offset(int xfeature_nr)
 	return ebx;
 }
 
-static int xfeature_size(int xfeature_nr)
+int xfeature_size(int xfeature_nr)
 {
 	u32 eax, ebx, ecx, edx;
 
@@ -598,7 +600,8 @@ static void check_xstate_against_struct(int nr)
 	 */
 	if ((nr < XFEATURE_YMM) ||
 	    (nr >= XFEATURE_MAX) ||
-	    (nr == XFEATURE_PT_UNIMPLEMENTED_SO_FAR)) {
+	    (nr == XFEATURE_PT_UNIMPLEMENTED_SO_FAR) ||
+	    ((nr >= XFEATURE_RSRVD_COMP_10) && (nr <= XFEATURE_LBR))) {
 		WARN_ONCE(1, "no structure for xstate: %d\n", nr);
 		XSTATE_WARN_ON(1);
 	}
@@ -847,8 +850,10 @@ void fpu__resume_cpu(void)
 	 * Restore IA32_XSS. The same CPUID bit enumerates support
 	 * of XSAVES and MSR_IA32_XSS.
 	 */
-	if (boot_cpu_has(X86_FEATURE_XSAVES))
-		wrmsrl(MSR_IA32_XSS, xfeatures_mask_supervisor());
+	if (boot_cpu_has(X86_FEATURE_XSAVES)) {
+		wrmsrl(MSR_IA32_XSS, xfeatures_mask_supervisor()  |
+				     xfeatures_mask_dynamic());
+	}
 }
 
 /*
@@ -1074,7 +1079,7 @@ int copy_xstate_to_kernel(void *kbuf, struct xregs_state *xsave, unsigned int of
 		copy_part(offsetof(struct fxregs_state, st_space), 128,
 			  &xsave->i387.st_space, &kbuf, &offset_start, &count);
 	if (header.xfeatures & XFEATURE_MASK_SSE)
-		copy_part(xstate_offsets[XFEATURE_MASK_SSE], 256,
+		copy_part(xstate_offsets[XFEATURE_SSE], 256,
 			  &xsave->i387.xmm_space, &kbuf, &offset_start, &count);
 	/*
 	 * Fill xsave->i387.sw_reserved value for ptrace frame:
@@ -1356,6 +1361,78 @@ void copy_supervisor_to_kernel(struct xregs_state *xstate)
 	}
 }
 
+/**
+ * copy_dynamic_supervisor_to_kernel() - Save dynamic supervisor states to
+ *                                       an xsave area
+ * @xstate: A pointer to an xsave area
+ * @mask: Represent the dynamic supervisor features saved into the xsave area
+ *
+ * Only the dynamic supervisor states sets in the mask are saved into the xsave
+ * area (See the comment in XFEATURE_MASK_DYNAMIC for the details of dynamic
+ * supervisor feature). Besides the dynamic supervisor states, the legacy
+ * region and XSAVE header are also saved into the xsave area. The supervisor
+ * features in the XFEATURE_MASK_SUPERVISOR_SUPPORTED and
+ * XFEATURE_MASK_SUPERVISOR_UNSUPPORTED are not saved.
+ *
+ * The xsave area must be 64-bytes aligned.
+ */
+void copy_dynamic_supervisor_to_kernel(struct xregs_state *xstate, u64 mask)
+{
+	u64 dynamic_mask = xfeatures_mask_dynamic() & mask;
+	u32 lmask, hmask;
+	int err;
+
+	if (WARN_ON_FPU(!boot_cpu_has(X86_FEATURE_XSAVES)))
+		return;
+
+	if (WARN_ON_FPU(!dynamic_mask))
+		return;
+
+	lmask = dynamic_mask;
+	hmask = dynamic_mask >> 32;
+
+	XSTATE_OP(XSAVES, xstate, lmask, hmask, err);
+
+	/* Should never fault when copying to a kernel buffer */
+	WARN_ON_FPU(err);
+}
+
+/**
+ * copy_kernel_to_dynamic_supervisor() - Restore dynamic supervisor states from
+ *                                       an xsave area
+ * @xstate: A pointer to an xsave area
+ * @mask: Represent the dynamic supervisor features restored from the xsave area
+ *
+ * Only the dynamic supervisor states sets in the mask are restored from the
+ * xsave area (See the comment in XFEATURE_MASK_DYNAMIC for the details of
+ * dynamic supervisor feature). Besides the dynamic supervisor states, the
+ * legacy region and XSAVE header are also restored from the xsave area. The
+ * supervisor features in the XFEATURE_MASK_SUPERVISOR_SUPPORTED and
+ * XFEATURE_MASK_SUPERVISOR_UNSUPPORTED are not restored.
+ *
+ * The xsave area must be 64-bytes aligned.
+ */
+void copy_kernel_to_dynamic_supervisor(struct xregs_state *xstate, u64 mask)
+{
+	u64 dynamic_mask = xfeatures_mask_dynamic() & mask;
+	u32 lmask, hmask;
+	int err;
+
+	if (WARN_ON_FPU(!boot_cpu_has(X86_FEATURE_XSAVES)))
+		return;
+
+	if (WARN_ON_FPU(!dynamic_mask))
+		return;
+
+	lmask = dynamic_mask;
+	hmask = dynamic_mask >> 32;
+
+	XSTATE_OP(XRSTORS, xstate, lmask, hmask, err);
+
+	/* Should never fault when copying from a kernel buffer */
+	WARN_ON_FPU(err);
+}
+
 #ifdef CONFIG_PROC_PID_ARCH_STATUS
 /*
  * Report the amount of time elapsed in millisecond since last AVX512
diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c
index c84d28e90a58..51504566b3a6 100644
--- a/arch/x86/kernel/ftrace.c
+++ b/arch/x86/kernel/ftrace.c
@@ -86,7 +86,7 @@ static int ftrace_verify_code(unsigned long ip, const char *old_code)
 	 * sure what we read is what we expected it to be before modifying it.
 	 */
 	/* read the text we want to modify */
-	if (probe_kernel_read(cur_code, (void *)ip, MCOUNT_INSN_SIZE)) {
+	if (copy_from_kernel_nofault(cur_code, (void *)ip, MCOUNT_INSN_SIZE)) {
 		WARN_ON(1);
 		return -EFAULT;
 	}
@@ -355,7 +355,7 @@ create_trampoline(struct ftrace_ops *ops, unsigned int *tramp_size)
 	npages = DIV_ROUND_UP(*tramp_size, PAGE_SIZE);
 
 	/* Copy ftrace_caller onto the trampoline memory */
-	ret = probe_kernel_read(trampoline, (void *)start_offset, size);
+	ret = copy_from_kernel_nofault(trampoline, (void *)start_offset, size);
 	if (WARN_ON(ret < 0))
 		goto fail;
 
@@ -363,13 +363,13 @@ create_trampoline(struct ftrace_ops *ops, unsigned int *tramp_size)
 
 	/* The trampoline ends with ret(q) */
 	retq = (unsigned long)ftrace_stub;
-	ret = probe_kernel_read(ip, (void *)retq, RET_SIZE);
+	ret = copy_from_kernel_nofault(ip, (void *)retq, RET_SIZE);
 	if (WARN_ON(ret < 0))
 		goto fail;
 
 	if (ops->flags & FTRACE_OPS_FL_SAVE_REGS) {
 		ip = trampoline + (ftrace_regs_caller_ret - ftrace_regs_caller);
-		ret = probe_kernel_read(ip, (void *)retq, RET_SIZE);
+		ret = copy_from_kernel_nofault(ip, (void *)retq, RET_SIZE);
 		if (WARN_ON(ret < 0))
 			goto fail;
 	}
@@ -506,7 +506,7 @@ static void *addr_from_call(void *ptr)
 	union text_poke_insn call;
 	int ret;
 
-	ret = probe_kernel_read(&call, ptr, CALL_INSN_SIZE);
+	ret = copy_from_kernel_nofault(&call, ptr, CALL_INSN_SIZE);
 	if (WARN_ON_ONCE(ret < 0))
 		return NULL;
 
diff --git a/arch/x86/kernel/i8259.c b/arch/x86/kernel/i8259.c
index f3c76252247d..282b4ee1339f 100644
--- a/arch/x86/kernel/i8259.c
+++ b/arch/x86/kernel/i8259.c
@@ -207,7 +207,7 @@ spurious_8259A_irq:
 		 * lets ACK and report it. [once per IRQ]
 		 */
 		if (!(spurious_irq_mask & irqmask)) {
-			printk(KERN_DEBUG
+			printk_deferred(KERN_DEBUG
 			       "spurious 8259A interrupt: IRQ%d.\n", irq);
 			spurious_irq_mask |= irqmask;
 		}
diff --git a/arch/x86/kernel/idt.c b/arch/x86/kernel/idt.c
index 0db21206f2f3..7ecf9babf0cb 100644
--- a/arch/x86/kernel/idt.c
+++ b/arch/x86/kernel/idt.c
@@ -160,7 +160,7 @@ static const __initconst struct idt_data apic_idts[] = {
 /* Must be page-aligned because the real IDT is used in the cpu entry area */
 static gate_desc idt_table[IDT_ENTRIES] __page_aligned_bss;
 
-struct desc_ptr idt_descr __ro_after_init = {
+static struct desc_ptr idt_descr __ro_after_init = {
 	.size		= IDT_TABLE_SIZE - 1,
 	.address	= (unsigned long) idt_table,
 };
diff --git a/arch/x86/kernel/kexec-bzimage64.c b/arch/x86/kernel/kexec-bzimage64.c
index db6578d45157..57c2ecf43134 100644
--- a/arch/x86/kernel/kexec-bzimage64.c
+++ b/arch/x86/kernel/kexec-bzimage64.c
@@ -170,15 +170,6 @@ setup_efi_state(struct boot_params *params, unsigned long params_load_addr,
 	if (!current_ei->efi_memmap_size)
 		return 0;
 
-	/*
-	 * If 1:1 mapping is not enabled, second kernel can not setup EFI
-	 * and use EFI run time services. User space will have to pass
-	 * acpi_rsdp=<addr> on kernel command line to make second kernel boot
-	 * without efi.
-	 */
-	if (efi_have_uv1_memmap())
-		return 0;
-
 	params->secure_boot = boot_params.secure_boot;
 	ei->efi_loader_signature = current_ei->efi_loader_signature;
 	ei->efi_systab = current_ei->efi_systab;
diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c
index c44fe7d8d9a4..68acd30c6b87 100644
--- a/arch/x86/kernel/kgdb.c
+++ b/arch/x86/kernel/kgdb.c
@@ -732,11 +732,11 @@ int kgdb_arch_set_breakpoint(struct kgdb_bkpt *bpt)
 	int err;
 
 	bpt->type = BP_BREAKPOINT;
-	err = probe_kernel_read(bpt->saved_instr, (char *)bpt->bpt_addr,
+	err = copy_from_kernel_nofault(bpt->saved_instr, (char *)bpt->bpt_addr,
 				BREAK_INSTR_SIZE);
 	if (err)
 		return err;
-	err = probe_kernel_write((char *)bpt->bpt_addr,
+	err = copy_to_kernel_nofault((char *)bpt->bpt_addr,
 				 arch_kgdb_ops.gdb_bpt_instr, BREAK_INSTR_SIZE);
 	if (!err)
 		return err;
@@ -768,7 +768,7 @@ int kgdb_arch_remove_breakpoint(struct kgdb_bkpt *bpt)
 	return 0;
 
 knl_write:
-	return probe_kernel_write((char *)bpt->bpt_addr,
+	return copy_to_kernel_nofault((char *)bpt->bpt_addr,
 				  (char *)bpt->saved_instr, BREAK_INSTR_SIZE);
 }
 
diff --git a/arch/x86/kernel/kprobes/core.c b/arch/x86/kernel/kprobes/core.c
index 3bafe1bd4dc7..fdadc37d72af 100644
--- a/arch/x86/kernel/kprobes/core.c
+++ b/arch/x86/kernel/kprobes/core.c
@@ -33,6 +33,7 @@
 #include <linux/hardirq.h>
 #include <linux/preempt.h>
 #include <linux/sched/debug.h>
+#include <linux/perf_event.h>
 #include <linux/extable.h>
 #include <linux/kdebug.h>
 #include <linux/kallsyms.h>
@@ -243,7 +244,7 @@ __recover_probed_insn(kprobe_opcode_t *buf, unsigned long addr)
 	 * Fortunately, we know that the original code is the ideal 5-byte
 	 * long NOP.
 	 */
-	if (probe_kernel_read(buf, (void *)addr,
+	if (copy_from_kernel_nofault(buf, (void *)addr,
 		MAX_INSN_SIZE * sizeof(kprobe_opcode_t)))
 		return 0UL;
 
@@ -346,7 +347,8 @@ int __copy_instruction(u8 *dest, u8 *src, u8 *real, struct insn *insn)
 		return 0;
 
 	/* This can access kernel text if given address is not recovered */
-	if (probe_kernel_read(dest, (void *)recovered_insn, MAX_INSN_SIZE))
+	if (copy_from_kernel_nofault(dest, (void *)recovered_insn,
+			MAX_INSN_SIZE))
 		return 0;
 
 	kernel_insn_init(insn, dest, MAX_INSN_SIZE);
@@ -471,6 +473,9 @@ static int arch_copy_kprobe(struct kprobe *p)
 	/* Also, displacement change doesn't affect the first byte */
 	p->opcode = buf[0];
 
+	p->ainsn.tp_len = len;
+	perf_event_text_poke(p->ainsn.insn, NULL, 0, buf, len);
+
 	/* OK, write back the instruction(s) into ROX insn buffer */
 	text_poke(p->ainsn.insn, buf, len);
 
@@ -502,12 +507,18 @@ int arch_prepare_kprobe(struct kprobe *p)
 
 void arch_arm_kprobe(struct kprobe *p)
 {
-	text_poke(p->addr, ((unsigned char []){INT3_INSN_OPCODE}), 1);
+	u8 int3 = INT3_INSN_OPCODE;
+
+	text_poke(p->addr, &int3, 1);
 	text_poke_sync();
+	perf_event_text_poke(p->addr, &p->opcode, 1, &int3, 1);
 }
 
 void arch_disarm_kprobe(struct kprobe *p)
 {
+	u8 int3 = INT3_INSN_OPCODE;
+
+	perf_event_text_poke(p->addr, &int3, 1, &p->opcode, 1);
 	text_poke(p->addr, &p->opcode, 1);
 	text_poke_sync();
 }
@@ -515,6 +526,9 @@ void arch_disarm_kprobe(struct kprobe *p)
 void arch_remove_kprobe(struct kprobe *p)
 {
 	if (p->ainsn.insn) {
+		/* Record the perf event before freeing the slot */
+		perf_event_text_poke(p->ainsn.insn, p->ainsn.insn,
+				     p->ainsn.tp_len, NULL, 0);
 		free_insn_slot(p->ainsn.insn, p->ainsn.boostable);
 		p->ainsn.insn = NULL;
 	}
@@ -753,16 +767,11 @@ asm(
 NOKPROBE_SYMBOL(kretprobe_trampoline);
 STACK_FRAME_NON_STANDARD(kretprobe_trampoline);
 
-static struct kprobe kretprobe_kprobe = {
-	.addr = (void *)kretprobe_trampoline,
-};
-
 /*
  * Called from kretprobe_trampoline
  */
 __used __visible void *trampoline_handler(struct pt_regs *regs)
 {
-	struct kprobe_ctlblk *kcb;
 	struct kretprobe_instance *ri = NULL;
 	struct hlist_head *head, empty_rp;
 	struct hlist_node *tmp;
@@ -772,16 +781,12 @@ __used __visible void *trampoline_handler(struct pt_regs *regs)
 	void *frame_pointer;
 	bool skipped = false;
 
-	preempt_disable();
-
 	/*
 	 * Set a dummy kprobe for avoiding kretprobe recursion.
 	 * Since kretprobe never run in kprobe handler, kprobe must not
 	 * be running at this point.
 	 */
-	kcb = get_kprobe_ctlblk();
-	__this_cpu_write(current_kprobe, &kretprobe_kprobe);
-	kcb->kprobe_status = KPROBE_HIT_ACTIVE;
+	kprobe_busy_begin();
 
 	INIT_HLIST_HEAD(&empty_rp);
 	kretprobe_hash_lock(current, &head, &flags);
@@ -857,7 +862,7 @@ __used __visible void *trampoline_handler(struct pt_regs *regs)
 			__this_cpu_write(current_kprobe, &ri->rp->kp);
 			ri->ret_addr = correct_ret_addr;
 			ri->rp->handler(ri, regs);
-			__this_cpu_write(current_kprobe, &kretprobe_kprobe);
+			__this_cpu_write(current_kprobe, &kprobe_busy);
 		}
 
 		recycle_rp_inst(ri, &empty_rp);
@@ -873,8 +878,7 @@ __used __visible void *trampoline_handler(struct pt_regs *regs)
 
 	kretprobe_hash_unlock(current, &flags);
 
-	__this_cpu_write(current_kprobe, NULL);
-	preempt_enable();
+	kprobe_busy_end();
 
 	hlist_for_each_entry_safe(ri, tmp, &empty_rp, hlist) {
 		hlist_del(&ri->hlist);
diff --git a/arch/x86/kernel/kprobes/opt.c b/arch/x86/kernel/kprobes/opt.c
index 321c19950285..40f380461e6d 100644
--- a/arch/x86/kernel/kprobes/opt.c
+++ b/arch/x86/kernel/kprobes/opt.c
@@ -6,6 +6,7 @@
  * Copyright (C) Hitachi Ltd., 2012
  */
 #include <linux/kprobes.h>
+#include <linux/perf_event.h>
 #include <linux/ptrace.h>
 #include <linux/string.h>
 #include <linux/slab.h>
@@ -56,7 +57,7 @@ found:
 	 * overwritten by jump destination address. In this case, original
 	 * bytes must be recovered from op->optinsn.copied_insn buffer.
 	 */
-	if (probe_kernel_read(buf, (void *)addr,
+	if (copy_from_kernel_nofault(buf, (void *)addr,
 		MAX_INSN_SIZE * sizeof(kprobe_opcode_t)))
 		return 0UL;
 
@@ -352,8 +353,15 @@ int arch_within_optimized_kprobe(struct optimized_kprobe *op,
 static
 void __arch_remove_optimized_kprobe(struct optimized_kprobe *op, int dirty)
 {
-	if (op->optinsn.insn) {
-		free_optinsn_slot(op->optinsn.insn, dirty);
+	u8 *slot = op->optinsn.insn;
+	if (slot) {
+		int len = TMPL_END_IDX + op->optinsn.size + JMP32_INSN_SIZE;
+
+		/* Record the perf event before freeing the slot */
+		if (dirty)
+			perf_event_text_poke(slot, slot, len, NULL, 0);
+
+		free_optinsn_slot(slot, dirty);
 		op->optinsn.insn = NULL;
 		op->optinsn.size = 0;
 	}
@@ -424,8 +432,15 @@ int arch_prepare_optimized_kprobe(struct optimized_kprobe *op,
 			   (u8 *)op->kp.addr + op->optinsn.size);
 	len += JMP32_INSN_SIZE;
 
+	/*
+	 * Note	len = TMPL_END_IDX + op->optinsn.size + JMP32_INSN_SIZE is also
+	 * used in __arch_remove_optimized_kprobe().
+	 */
+
 	/* We have to use text_poke() for instruction buffer because it is RO */
+	perf_event_text_poke(slot, NULL, 0, buf, len);
 	text_poke(slot, buf, len);
+
 	ret = 0;
 out:
 	kfree(buf);
@@ -477,10 +492,23 @@ void arch_optimize_kprobes(struct list_head *oplist)
  */
 void arch_unoptimize_kprobe(struct optimized_kprobe *op)
 {
-	arch_arm_kprobe(&op->kp);
-	text_poke(op->kp.addr + INT3_INSN_SIZE,
-		  op->optinsn.copied_insn, DISP32_SIZE);
+	u8 new[JMP32_INSN_SIZE] = { INT3_INSN_OPCODE, };
+	u8 old[JMP32_INSN_SIZE];
+	u8 *addr = op->kp.addr;
+
+	memcpy(old, op->kp.addr, JMP32_INSN_SIZE);
+	memcpy(new + INT3_INSN_SIZE,
+	       op->optinsn.copied_insn,
+	       JMP32_INSN_SIZE - INT3_INSN_SIZE);
+
+	text_poke(addr, new, INT3_INSN_SIZE);
 	text_poke_sync();
+	text_poke(addr + INT3_INSN_SIZE,
+		  new + INT3_INSN_SIZE,
+		  JMP32_INSN_SIZE - INT3_INSN_SIZE);
+	text_poke_sync();
+
+	perf_event_text_poke(op->kp.addr, old, JMP32_INSN_SIZE, new, JMP32_INSN_SIZE);
 }
 
 /*
diff --git a/arch/x86/kernel/kvm.c b/arch/x86/kernel/kvm.c
index df63786e7bfa..233c77d056c9 100644
--- a/arch/x86/kernel/kvm.c
+++ b/arch/x86/kernel/kvm.c
@@ -233,7 +233,7 @@ EXPORT_SYMBOL_GPL(kvm_read_and_reset_apf_flags);
 noinstr bool __kvm_handle_async_pf(struct pt_regs *regs, u32 token)
 {
 	u32 reason = kvm_read_and_reset_apf_flags();
-	bool rcu_exit;
+	irqentry_state_t state;
 
 	switch (reason) {
 	case KVM_PV_REASON_PAGE_NOT_PRESENT:
@@ -243,7 +243,7 @@ noinstr bool __kvm_handle_async_pf(struct pt_regs *regs, u32 token)
 		return false;
 	}
 
-	rcu_exit = idtentry_enter_cond_rcu(regs);
+	state = irqentry_enter(regs);
 	instrumentation_begin();
 
 	/*
@@ -264,7 +264,7 @@ noinstr bool __kvm_handle_async_pf(struct pt_regs *regs, u32 token)
 	}
 
 	instrumentation_end();
-	idtentry_exit_cond_rcu(regs, rcu_exit);
+	irqentry_exit(regs, state);
 	return true;
 }
 
diff --git a/arch/x86/kernel/ldt.c b/arch/x86/kernel/ldt.c
index 8748321c4486..b8aee71840ae 100644
--- a/arch/x86/kernel/ldt.c
+++ b/arch/x86/kernel/ldt.c
@@ -29,6 +29,8 @@
 #include <asm/mmu_context.h>
 #include <asm/pgtable_areas.h>
 
+#include <xen/xen.h>
+
 /* This is a multiple of PAGE_SIZE. */
 #define LDT_SLOT_STRIDE (LDT_ENTRIES * LDT_ENTRY_SIZE)
 
@@ -543,6 +545,28 @@ static int read_default_ldt(void __user *ptr, unsigned long bytecount)
 	return bytecount;
 }
 
+static bool allow_16bit_segments(void)
+{
+	if (!IS_ENABLED(CONFIG_X86_16BIT))
+		return false;
+
+#ifdef CONFIG_XEN_PV
+	/*
+	 * Xen PV does not implement ESPFIX64, which means that 16-bit
+	 * segments will not work correctly.  Until either Xen PV implements
+	 * ESPFIX64 and can signal this fact to the guest or unless someone
+	 * provides compelling evidence that allowing broken 16-bit segments
+	 * is worthwhile, disallow 16-bit segments under Xen PV.
+	 */
+	if (xen_pv_domain()) {
+		pr_info_once("Warning: 16-bit segments do not work correctly in a Xen PV guest\n");
+		return false;
+	}
+#endif
+
+	return true;
+}
+
 static int write_ldt(void __user *ptr, unsigned long bytecount, int oldmode)
 {
 	struct mm_struct *mm = current->mm;
@@ -574,7 +598,7 @@ static int write_ldt(void __user *ptr, unsigned long bytecount, int oldmode)
 		/* The user wants to clear the entry. */
 		memset(&ldt, 0, sizeof(ldt));
 	} else {
-		if (!IS_ENABLED(CONFIG_X86_16BIT) && !ldt_info.seg_32bit) {
+		if (!ldt_info.seg_32bit && !allow_16bit_segments()) {
 			error = -EINVAL;
 			goto out;
 		}
diff --git a/arch/x86/kernel/msr.c b/arch/x86/kernel/msr.c
index 1547be359d7f..49dcfb85e773 100644
--- a/arch/x86/kernel/msr.c
+++ b/arch/x86/kernel/msr.c
@@ -42,6 +42,14 @@
 static struct class *msr_class;
 static enum cpuhp_state cpuhp_msr_state;
 
+enum allow_write_msrs {
+	MSR_WRITES_ON,
+	MSR_WRITES_OFF,
+	MSR_WRITES_DEFAULT,
+};
+
+static enum allow_write_msrs allow_writes = MSR_WRITES_DEFAULT;
+
 static ssize_t msr_read(struct file *file, char __user *buf,
 			size_t count, loff_t *ppos)
 {
@@ -70,6 +78,24 @@ static ssize_t msr_read(struct file *file, char __user *buf,
 	return bytes ? bytes : err;
 }
 
+static int filter_write(u32 reg)
+{
+	switch (allow_writes) {
+	case MSR_WRITES_ON:  return 0;
+	case MSR_WRITES_OFF: return -EPERM;
+	default: break;
+	}
+
+	if (reg == MSR_IA32_ENERGY_PERF_BIAS)
+		return 0;
+
+	pr_err_ratelimited("Write to unrecognized MSR 0x%x by %s\n"
+			   "Please report to x86@kernel.org\n",
+			   reg, current->comm);
+
+	return 0;
+}
+
 static ssize_t msr_write(struct file *file, const char __user *buf,
 			 size_t count, loff_t *ppos)
 {
@@ -84,6 +110,10 @@ static ssize_t msr_write(struct file *file, const char __user *buf,
 	if (err)
 		return err;
 
+	err = filter_write(reg);
+	if (err)
+		return err;
+
 	if (count % 8)
 		return -EINVAL;	/* Invalid chunk size */
 
@@ -92,9 +122,13 @@ static ssize_t msr_write(struct file *file, const char __user *buf,
 			err = -EFAULT;
 			break;
 		}
+
+		add_taint(TAINT_CPU_OUT_OF_SPEC, LOCKDEP_STILL_OK);
+
 		err = wrmsr_safe_on_cpu(cpu, reg, data[0], data[1]);
 		if (err)
 			break;
+
 		tmp += 2;
 		bytes += 8;
 	}
@@ -242,6 +276,41 @@ static void __exit msr_exit(void)
 }
 module_exit(msr_exit)
 
+static int set_allow_writes(const char *val, const struct kernel_param *cp)
+{
+	/* val is NUL-terminated, see kernfs_fop_write() */
+	char *s = strstrip((char *)val);
+
+	if (!strcmp(s, "on"))
+		allow_writes = MSR_WRITES_ON;
+	else if (!strcmp(s, "off"))
+		allow_writes = MSR_WRITES_OFF;
+	else
+		allow_writes = MSR_WRITES_DEFAULT;
+
+	return 0;
+}
+
+static int get_allow_writes(char *buf, const struct kernel_param *kp)
+{
+	const char *res;
+
+	switch (allow_writes) {
+	case MSR_WRITES_ON:  res = "on"; break;
+	case MSR_WRITES_OFF: res = "off"; break;
+	default: res = "default"; break;
+	}
+
+	return sprintf(buf, "%s\n", res);
+}
+
+static const struct kernel_param_ops allow_writes_ops = {
+	.set = set_allow_writes,
+	.get = get_allow_writes
+};
+
+module_param_cb(allow_writes, &allow_writes_ops, NULL, 0600);
+
 MODULE_AUTHOR("H. Peter Anvin <hpa@zytor.com>");
 MODULE_DESCRIPTION("x86 generic MSR driver");
 MODULE_LICENSE("GPL");
diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c
index 2de365f15684..4fc9954a9560 100644
--- a/arch/x86/kernel/nmi.c
+++ b/arch/x86/kernel/nmi.c
@@ -330,7 +330,6 @@ static noinstr void default_do_nmi(struct pt_regs *regs)
 	__this_cpu_write(last_nmi_rip, regs->ip);
 
 	instrumentation_begin();
-	trace_hardirqs_off_finish();
 
 	handled = nmi_handle(NMI_LOCAL, regs);
 	__this_cpu_add(nmi_stats.normal, handled);
@@ -417,8 +416,6 @@ static noinstr void default_do_nmi(struct pt_regs *regs)
 		unknown_nmi_error(reason, regs);
 
 out:
-	if (regs->flags & X86_EFLAGS_IF)
-		trace_hardirqs_on_prepare();
 	instrumentation_end();
 }
 
@@ -478,7 +475,9 @@ static DEFINE_PER_CPU(unsigned long, nmi_dr7);
 
 DEFINE_IDTENTRY_RAW(exc_nmi)
 {
-	if (IS_ENABLED(CONFIG_SMP) && cpu_is_offline(smp_processor_id()))
+	bool irq_state;
+
+	if (IS_ENABLED(CONFIG_SMP) && arch_cpu_is_offline(smp_processor_id()))
 		return;
 
 	if (this_cpu_read(nmi_state) != NMI_NOT_RUNNING) {
@@ -491,14 +490,14 @@ nmi_restart:
 
 	this_cpu_write(nmi_dr7, local_db_save());
 
-	nmi_enter();
+	irq_state = idtentry_enter_nmi(regs);
 
 	inc_irq_stat(__nmi_count);
 
 	if (!ignore_nmis)
 		default_do_nmi(regs);
 
-	nmi_exit();
+	idtentry_exit_nmi(regs, irq_state);
 
 	local_db_restore(this_cpu_read(nmi_dr7));
 
diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
index 674a7d66d960..de2138ba38e5 100644
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -324,7 +324,8 @@ struct paravirt_patch_template pv_ops = {
 	.cpu.swapgs		= native_swapgs,
 
 #ifdef CONFIG_X86_IOPL_IOPERM
-	.cpu.update_io_bitmap	= native_tss_update_io_bitmap,
+	.cpu.invalidate_io_bitmap	= native_tss_invalidate_io_bitmap,
+	.cpu.update_io_bitmap		= native_tss_update_io_bitmap,
 #endif
 
 	.cpu.start_context_switch	= paravirt_nop,
diff --git a/arch/x86/kernel/probe_roms.c b/arch/x86/kernel/probe_roms.c
index ee0286390a4c..9e1def3744f2 100644
--- a/arch/x86/kernel/probe_roms.c
+++ b/arch/x86/kernel/probe_roms.c
@@ -94,12 +94,12 @@ static bool match_id(struct pci_dev *pdev, unsigned short vendor, unsigned short
 }
 
 static bool probe_list(struct pci_dev *pdev, unsigned short vendor,
-		       const unsigned char *rom_list)
+		       const void *rom_list)
 {
 	unsigned short device;
 
 	do {
-		if (probe_kernel_address(rom_list, device) != 0)
+		if (get_kernel_nofault(device, rom_list) != 0)
 			device = 0;
 
 		if (device && match_id(pdev, vendor, device))
@@ -119,19 +119,19 @@ static struct resource *find_oprom(struct pci_dev *pdev)
 	for (i = 0; i < ARRAY_SIZE(adapter_rom_resources); i++) {
 		struct resource *res = &adapter_rom_resources[i];
 		unsigned short offset, vendor, device, list, rev;
-		const unsigned char *rom;
+		const void *rom;
 
 		if (res->end == 0)
 			break;
 
 		rom = isa_bus_to_virt(res->start);
-		if (probe_kernel_address(rom + 0x18, offset) != 0)
+		if (get_kernel_nofault(offset, rom + 0x18) != 0)
 			continue;
 
-		if (probe_kernel_address(rom + offset + 0x4, vendor) != 0)
+		if (get_kernel_nofault(vendor, rom + offset + 0x4) != 0)
 			continue;
 
-		if (probe_kernel_address(rom + offset + 0x6, device) != 0)
+		if (get_kernel_nofault(device, rom + offset + 0x6) != 0)
 			continue;
 
 		if (match_id(pdev, vendor, device)) {
@@ -139,8 +139,8 @@ static struct resource *find_oprom(struct pci_dev *pdev)
 			break;
 		}
 
-		if (probe_kernel_address(rom + offset + 0x8, list) == 0 &&
-		    probe_kernel_address(rom + offset + 0xc, rev) == 0 &&
+		if (get_kernel_nofault(list, rom + offset + 0x8) == 0 &&
+		    get_kernel_nofault(rev, rom + offset + 0xc) == 0 &&
 		    rev >= 3 && list &&
 		    probe_list(pdev, vendor, rom + offset + list)) {
 			oprom = res;
@@ -183,14 +183,14 @@ static int __init romsignature(const unsigned char *rom)
 	const unsigned short * const ptr = (const unsigned short *)rom;
 	unsigned short sig;
 
-	return probe_kernel_address(ptr, sig) == 0 && sig == ROMSIGNATURE;
+	return get_kernel_nofault(sig, ptr) == 0 && sig == ROMSIGNATURE;
 }
 
 static int __init romchecksum(const unsigned char *rom, unsigned long length)
 {
 	unsigned char sum, c;
 
-	for (sum = 0; length && probe_kernel_address(rom++, c) == 0; length--)
+	for (sum = 0; length && get_kernel_nofault(c, rom++) == 0; length--)
 		sum += c;
 	return !length && !sum;
 }
@@ -211,7 +211,7 @@ void __init probe_roms(void)
 
 		video_rom_resource.start = start;
 
-		if (probe_kernel_address(rom + 2, c) != 0)
+		if (get_kernel_nofault(c, rom + 2) != 0)
 			continue;
 
 		/* 0 < length <= 0x7f * 512, historically */
@@ -249,7 +249,7 @@ void __init probe_roms(void)
 		if (!romsignature(rom))
 			continue;
 
-		if (probe_kernel_address(rom + 2, c) != 0)
+		if (get_kernel_nofault(c, rom + 2) != 0)
 			continue;
 
 		/* 0 < length <= 0x7f * 512, historically */
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index f362ce0d5ac0..994d8393f2f7 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -121,8 +121,8 @@ static int set_new_tls(struct task_struct *p, unsigned long tls)
 		return do_set_thread_area_64(p, ARCH_SET_FS, tls);
 }
 
-int copy_thread_tls(unsigned long clone_flags, unsigned long sp,
-		    unsigned long arg, struct task_struct *p, unsigned long tls)
+int copy_thread(unsigned long clone_flags, unsigned long sp, unsigned long arg,
+		struct task_struct *p, unsigned long tls)
 {
 	struct inactive_task_frame *frame;
 	struct fork_frame *fork_frame;
@@ -140,10 +140,12 @@ int copy_thread_tls(unsigned long clone_flags, unsigned long sp,
 	memset(p->thread.ptrace_bps, 0, sizeof(p->thread.ptrace_bps));
 
 #ifdef CONFIG_X86_64
-	savesegment(gs, p->thread.gsindex);
-	p->thread.gsbase = p->thread.gsindex ? 0 : current->thread.gsbase;
-	savesegment(fs, p->thread.fsindex);
-	p->thread.fsbase = p->thread.fsindex ? 0 : current->thread.fsbase;
+	current_save_fsgs();
+	p->thread.fsindex = current->thread.fsindex;
+	p->thread.fsbase = current->thread.fsbase;
+	p->thread.gsindex = current->thread.gsindex;
+	p->thread.gsbase = current->thread.gsbase;
+
 	savesegment(es, p->thread.es);
 	savesegment(ds, p->thread.ds);
 #else
@@ -322,20 +324,6 @@ void arch_setup_new_exec(void)
 }
 
 #ifdef CONFIG_X86_IOPL_IOPERM
-static inline void tss_invalidate_io_bitmap(struct tss_struct *tss)
-{
-	/*
-	 * Invalidate the I/O bitmap by moving io_bitmap_base outside the
-	 * TSS limit so any subsequent I/O access from user space will
-	 * trigger a #GP.
-	 *
-	 * This is correct even when VMEXIT rewrites the TSS limit
-	 * to 0x67 as the only requirement is that the base points
-	 * outside the limit.
-	 */
-	tss->x86_tss.io_bitmap_base = IO_BITMAP_OFFSET_INVALID;
-}
-
 static inline void switch_to_bitmap(unsigned long tifp)
 {
 	/*
@@ -346,7 +334,7 @@ static inline void switch_to_bitmap(unsigned long tifp)
 	 * user mode.
 	 */
 	if (tifp & _TIF_IO_BITMAP)
-		tss_invalidate_io_bitmap(this_cpu_ptr(&cpu_tss_rw));
+		tss_invalidate_io_bitmap();
 }
 
 static void tss_copy_io_bitmap(struct tss_struct *tss, struct io_bitmap *iobm)
@@ -380,7 +368,7 @@ void native_tss_update_io_bitmap(void)
 	u16 *base = &tss->x86_tss.io_bitmap_base;
 
 	if (!test_thread_flag(TIF_IO_BITMAP)) {
-		tss_invalidate_io_bitmap(tss);
+		native_tss_invalidate_io_bitmap();
 		return;
 	}
 
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index acfd6d2a0cbf..4f2f54e1281c 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -56,7 +56,8 @@
 
 #include "process.h"
 
-void __show_regs(struct pt_regs *regs, enum show_regs_mode mode)
+void __show_regs(struct pt_regs *regs, enum show_regs_mode mode,
+		 const char *log_lvl)
 {
 	unsigned long cr0 = 0L, cr2 = 0L, cr3 = 0L, cr4 = 0L;
 	unsigned long d0, d1, d2, d3, d6, d7;
@@ -67,14 +68,14 @@ void __show_regs(struct pt_regs *regs, enum show_regs_mode mode)
 	else
 		savesegment(gs, gs);
 
-	show_ip(regs, KERN_DEFAULT);
+	show_ip(regs, log_lvl);
 
-	printk(KERN_DEFAULT "EAX: %08lx EBX: %08lx ECX: %08lx EDX: %08lx\n",
-		regs->ax, regs->bx, regs->cx, regs->dx);
-	printk(KERN_DEFAULT "ESI: %08lx EDI: %08lx EBP: %08lx ESP: %08lx\n",
-		regs->si, regs->di, regs->bp, regs->sp);
-	printk(KERN_DEFAULT "DS: %04x ES: %04x FS: %04x GS: %04x SS: %04x EFLAGS: %08lx\n",
-	       (u16)regs->ds, (u16)regs->es, (u16)regs->fs, gs, regs->ss, regs->flags);
+	printk("%sEAX: %08lx EBX: %08lx ECX: %08lx EDX: %08lx\n",
+		log_lvl, regs->ax, regs->bx, regs->cx, regs->dx);
+	printk("%sESI: %08lx EDI: %08lx EBP: %08lx ESP: %08lx\n",
+		log_lvl, regs->si, regs->di, regs->bp, regs->sp);
+	printk("%sDS: %04x ES: %04x FS: %04x GS: %04x SS: %04x EFLAGS: %08lx\n",
+	       log_lvl, (u16)regs->ds, (u16)regs->es, (u16)regs->fs, gs, regs->ss, regs->flags);
 
 	if (mode != SHOW_REGS_ALL)
 		return;
@@ -83,8 +84,8 @@ void __show_regs(struct pt_regs *regs, enum show_regs_mode mode)
 	cr2 = read_cr2();
 	cr3 = __read_cr3();
 	cr4 = __read_cr4();
-	printk(KERN_DEFAULT "CR0: %08lx CR2: %08lx CR3: %08lx CR4: %08lx\n",
-			cr0, cr2, cr3, cr4);
+	printk("%sCR0: %08lx CR2: %08lx CR3: %08lx CR4: %08lx\n",
+		log_lvl, cr0, cr2, cr3, cr4);
 
 	get_debugreg(d0, 0);
 	get_debugreg(d1, 1);
@@ -98,10 +99,10 @@ void __show_regs(struct pt_regs *regs, enum show_regs_mode mode)
 	    (d6 == DR6_RESERVED) && (d7 == 0x400))
 		return;
 
-	printk(KERN_DEFAULT "DR0: %08lx DR1: %08lx DR2: %08lx DR3: %08lx\n",
-			d0, d1, d2, d3);
-	printk(KERN_DEFAULT "DR6: %08lx DR7: %08lx\n",
-			d6, d7);
+	printk("%sDR0: %08lx DR1: %08lx DR2: %08lx DR3: %08lx\n",
+		log_lvl, d0, d1, d2, d3);
+	printk("%sDR6: %08lx DR7: %08lx\n",
+		log_lvl, d6, d7);
 }
 
 void release_thread(struct task_struct *dead_task)
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index 9a97415b2139..d6f946707270 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -62,30 +62,31 @@
 #include "process.h"
 
 /* Prints also some state that isn't saved in the pt_regs */
-void __show_regs(struct pt_regs *regs, enum show_regs_mode mode)
+void __show_regs(struct pt_regs *regs, enum show_regs_mode mode,
+		 const char *log_lvl)
 {
 	unsigned long cr0 = 0L, cr2 = 0L, cr3 = 0L, cr4 = 0L, fs, gs, shadowgs;
 	unsigned long d0, d1, d2, d3, d6, d7;
 	unsigned int fsindex, gsindex;
 	unsigned int ds, es;
 
-	show_iret_regs(regs);
+	show_iret_regs(regs, log_lvl);
 
 	if (regs->orig_ax != -1)
 		pr_cont(" ORIG_RAX: %016lx\n", regs->orig_ax);
 	else
 		pr_cont("\n");
 
-	printk(KERN_DEFAULT "RAX: %016lx RBX: %016lx RCX: %016lx\n",
-	       regs->ax, regs->bx, regs->cx);
-	printk(KERN_DEFAULT "RDX: %016lx RSI: %016lx RDI: %016lx\n",
-	       regs->dx, regs->si, regs->di);
-	printk(KERN_DEFAULT "RBP: %016lx R08: %016lx R09: %016lx\n",
-	       regs->bp, regs->r8, regs->r9);
-	printk(KERN_DEFAULT "R10: %016lx R11: %016lx R12: %016lx\n",
-	       regs->r10, regs->r11, regs->r12);
-	printk(KERN_DEFAULT "R13: %016lx R14: %016lx R15: %016lx\n",
-	       regs->r13, regs->r14, regs->r15);
+	printk("%sRAX: %016lx RBX: %016lx RCX: %016lx\n",
+	       log_lvl, regs->ax, regs->bx, regs->cx);
+	printk("%sRDX: %016lx RSI: %016lx RDI: %016lx\n",
+	       log_lvl, regs->dx, regs->si, regs->di);
+	printk("%sRBP: %016lx R08: %016lx R09: %016lx\n",
+	       log_lvl, regs->bp, regs->r8, regs->r9);
+	printk("%sR10: %016lx R11: %016lx R12: %016lx\n",
+	       log_lvl, regs->r10, regs->r11, regs->r12);
+	printk("%sR13: %016lx R14: %016lx R15: %016lx\n",
+	       log_lvl, regs->r13, regs->r14, regs->r15);
 
 	if (mode == SHOW_REGS_SHORT)
 		return;
@@ -93,8 +94,8 @@ void __show_regs(struct pt_regs *regs, enum show_regs_mode mode)
 	if (mode == SHOW_REGS_USER) {
 		rdmsrl(MSR_FS_BASE, fs);
 		rdmsrl(MSR_KERNEL_GS_BASE, shadowgs);
-		printk(KERN_DEFAULT "FS:  %016lx GS:  %016lx\n",
-		       fs, shadowgs);
+		printk("%sFS:  %016lx GS:  %016lx\n",
+		       log_lvl, fs, shadowgs);
 		return;
 	}
 
@@ -112,12 +113,12 @@ void __show_regs(struct pt_regs *regs, enum show_regs_mode mode)
 	cr3 = __read_cr3();
 	cr4 = __read_cr4();
 
-	printk(KERN_DEFAULT "FS:  %016lx(%04x) GS:%016lx(%04x) knlGS:%016lx\n",
-	       fs, fsindex, gs, gsindex, shadowgs);
-	printk(KERN_DEFAULT "CS:  %04lx DS: %04x ES: %04x CR0: %016lx\n", regs->cs, ds,
-			es, cr0);
-	printk(KERN_DEFAULT "CR2: %016lx CR3: %016lx CR4: %016lx\n", cr2, cr3,
-			cr4);
+	printk("%sFS:  %016lx(%04x) GS:%016lx(%04x) knlGS:%016lx\n",
+	       log_lvl, fs, fsindex, gs, gsindex, shadowgs);
+	printk("%sCS:  %04lx DS: %04x ES: %04x CR0: %016lx\n",
+		log_lvl, regs->cs, ds, es, cr0);
+	printk("%sCR2: %016lx CR3: %016lx CR4: %016lx\n",
+		log_lvl, cr2, cr3, cr4);
 
 	get_debugreg(d0, 0);
 	get_debugreg(d1, 1);
@@ -129,14 +130,14 @@ void __show_regs(struct pt_regs *regs, enum show_regs_mode mode)
 	/* Only print out debug registers if they are in their non-default state. */
 	if (!((d0 == 0) && (d1 == 0) && (d2 == 0) && (d3 == 0) &&
 	    (d6 == DR6_RESERVED) && (d7 == 0x400))) {
-		printk(KERN_DEFAULT "DR0: %016lx DR1: %016lx DR2: %016lx\n",
-		       d0, d1, d2);
-		printk(KERN_DEFAULT "DR3: %016lx DR6: %016lx DR7: %016lx\n",
-		       d3, d6, d7);
+		printk("%sDR0: %016lx DR1: %016lx DR2: %016lx\n",
+		       log_lvl, d0, d1, d2);
+		printk("%sDR3: %016lx DR6: %016lx DR7: %016lx\n",
+		       log_lvl, d3, d6, d7);
 	}
 
 	if (boot_cpu_has(X86_FEATURE_OSPKE))
-		printk(KERN_DEFAULT "PKRU: %08x\n", read_pkru());
+		printk("%sPKRU: %08x\n", log_lvl, read_pkru());
 }
 
 void release_thread(struct task_struct *dead_task)
@@ -150,6 +151,56 @@ enum which_selector {
 };
 
 /*
+ * Out of line to be protected from kprobes and tracing. If this would be
+ * traced or probed than any access to a per CPU variable happens with
+ * the wrong GS.
+ *
+ * It is not used on Xen paravirt. When paravirt support is needed, it
+ * needs to be renamed with native_ prefix.
+ */
+static noinstr unsigned long __rdgsbase_inactive(void)
+{
+	unsigned long gsbase;
+
+	lockdep_assert_irqs_disabled();
+
+	if (!static_cpu_has(X86_FEATURE_XENPV)) {
+		native_swapgs();
+		gsbase = rdgsbase();
+		native_swapgs();
+	} else {
+		instrumentation_begin();
+		rdmsrl(MSR_KERNEL_GS_BASE, gsbase);
+		instrumentation_end();
+	}
+
+	return gsbase;
+}
+
+/*
+ * Out of line to be protected from kprobes and tracing. If this would be
+ * traced or probed than any access to a per CPU variable happens with
+ * the wrong GS.
+ *
+ * It is not used on Xen paravirt. When paravirt support is needed, it
+ * needs to be renamed with native_ prefix.
+ */
+static noinstr void __wrgsbase_inactive(unsigned long gsbase)
+{
+	lockdep_assert_irqs_disabled();
+
+	if (!static_cpu_has(X86_FEATURE_XENPV)) {
+		native_swapgs();
+		wrgsbase(gsbase);
+		native_swapgs();
+	} else {
+		instrumentation_begin();
+		wrmsrl(MSR_KERNEL_GS_BASE, gsbase);
+		instrumentation_end();
+	}
+}
+
+/*
  * Saves the FS or GS base for an outgoing thread if FSGSBASE extensions are
  * not available.  The goal is to be reasonably fast on non-FSGSBASE systems.
  * It's forcibly inlined because it'll generate better code and this function
@@ -198,22 +249,35 @@ static __always_inline void save_fsgs(struct task_struct *task)
 {
 	savesegment(fs, task->thread.fsindex);
 	savesegment(gs, task->thread.gsindex);
-	save_base_legacy(task, task->thread.fsindex, FS);
-	save_base_legacy(task, task->thread.gsindex, GS);
+	if (static_cpu_has(X86_FEATURE_FSGSBASE)) {
+		/*
+		 * If FSGSBASE is enabled, we can't make any useful guesses
+		 * about the base, and user code expects us to save the current
+		 * value.  Fortunately, reading the base directly is efficient.
+		 */
+		task->thread.fsbase = rdfsbase();
+		task->thread.gsbase = __rdgsbase_inactive();
+	} else {
+		save_base_legacy(task, task->thread.fsindex, FS);
+		save_base_legacy(task, task->thread.gsindex, GS);
+	}
 }
 
-#if IS_ENABLED(CONFIG_KVM)
 /*
  * While a process is running,current->thread.fsbase and current->thread.gsbase
- * may not match the corresponding CPU registers (see save_base_legacy()). KVM
- * wants an efficient way to save and restore FSBASE and GSBASE.
- * When FSGSBASE extensions are enabled, this will have to use RD{FS,GS}BASE.
+ * may not match the corresponding CPU registers (see save_base_legacy()).
  */
-void save_fsgs_for_kvm(void)
+void current_save_fsgs(void)
 {
+	unsigned long flags;
+
+	/* Interrupts need to be off for FSGSBASE */
+	local_irq_save(flags);
 	save_fsgs(current);
+	local_irq_restore(flags);
 }
-EXPORT_SYMBOL_GPL(save_fsgs_for_kvm);
+#if IS_ENABLED(CONFIG_KVM)
+EXPORT_SYMBOL_GPL(current_save_fsgs);
 #endif
 
 static __always_inline void loadseg(enum which_selector which,
@@ -278,14 +342,26 @@ static __always_inline void load_seg_legacy(unsigned short prev_index,
 static __always_inline void x86_fsgsbase_load(struct thread_struct *prev,
 					      struct thread_struct *next)
 {
-	load_seg_legacy(prev->fsindex, prev->fsbase,
-			next->fsindex, next->fsbase, FS);
-	load_seg_legacy(prev->gsindex, prev->gsbase,
-			next->gsindex, next->gsbase, GS);
+	if (static_cpu_has(X86_FEATURE_FSGSBASE)) {
+		/* Update the FS and GS selectors if they could have changed. */
+		if (unlikely(prev->fsindex || next->fsindex))
+			loadseg(FS, next->fsindex);
+		if (unlikely(prev->gsindex || next->gsindex))
+			loadseg(GS, next->gsindex);
+
+		/* Update the bases. */
+		wrfsbase(next->fsbase);
+		__wrgsbase_inactive(next->gsbase);
+	} else {
+		load_seg_legacy(prev->fsindex, prev->fsbase,
+				next->fsindex, next->fsbase, FS);
+		load_seg_legacy(prev->gsindex, prev->gsbase,
+				next->gsindex, next->gsbase, GS);
+	}
 }
 
-static unsigned long x86_fsgsbase_read_task(struct task_struct *task,
-					    unsigned short selector)
+unsigned long x86_fsgsbase_read_task(struct task_struct *task,
+				     unsigned short selector)
 {
 	unsigned short idx = selector >> 3;
 	unsigned long base;
@@ -327,13 +403,44 @@ static unsigned long x86_fsgsbase_read_task(struct task_struct *task,
 	return base;
 }
 
+unsigned long x86_gsbase_read_cpu_inactive(void)
+{
+	unsigned long gsbase;
+
+	if (static_cpu_has(X86_FEATURE_FSGSBASE)) {
+		unsigned long flags;
+
+		local_irq_save(flags);
+		gsbase = __rdgsbase_inactive();
+		local_irq_restore(flags);
+	} else {
+		rdmsrl(MSR_KERNEL_GS_BASE, gsbase);
+	}
+
+	return gsbase;
+}
+
+void x86_gsbase_write_cpu_inactive(unsigned long gsbase)
+{
+	if (static_cpu_has(X86_FEATURE_FSGSBASE)) {
+		unsigned long flags;
+
+		local_irq_save(flags);
+		__wrgsbase_inactive(gsbase);
+		local_irq_restore(flags);
+	} else {
+		wrmsrl(MSR_KERNEL_GS_BASE, gsbase);
+	}
+}
+
 unsigned long x86_fsbase_read_task(struct task_struct *task)
 {
 	unsigned long fsbase;
 
 	if (task == current)
 		fsbase = x86_fsbase_read_cpu();
-	else if (task->thread.fsindex == 0)
+	else if (static_cpu_has(X86_FEATURE_FSGSBASE) ||
+		 (task->thread.fsindex == 0))
 		fsbase = task->thread.fsbase;
 	else
 		fsbase = x86_fsgsbase_read_task(task, task->thread.fsindex);
@@ -347,7 +454,8 @@ unsigned long x86_gsbase_read_task(struct task_struct *task)
 
 	if (task == current)
 		gsbase = x86_gsbase_read_cpu_inactive();
-	else if (task->thread.gsindex == 0)
+	else if (static_cpu_has(X86_FEATURE_FSGSBASE) ||
+		 (task->thread.gsindex == 0))
 		gsbase = task->thread.gsbase;
 	else
 		gsbase = x86_fsgsbase_read_task(task, task->thread.gsindex);
diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index 44130588987f..3f006489087f 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -281,17 +281,9 @@ static int set_segment_reg(struct task_struct *task,
 		return -EIO;
 
 	/*
-	 * This function has some ABI oddities.
-	 *
-	 * A 32-bit ptracer probably expects that writing FS or GS will change
-	 * FSBASE or GSBASE respectively.  In the absence of FSGSBASE support,
-	 * this code indeed has that effect.  When FSGSBASE is added, this
-	 * will require a special case.
-	 *
-	 * For existing 64-bit ptracers, writing FS or GS *also* currently
-	 * changes the base if the selector is nonzero the next time the task
-	 * is run.  This behavior may not be needed, and trying to preserve it
-	 * when FSGSBASE is added would be complicated at best.
+	 * Writes to FS and GS will change the stored selector.  Whether
+	 * this changes the segment base as well depends on whether
+	 * FSGSBASE is enabled.
 	 */
 
 	switch (offset) {
@@ -379,25 +371,12 @@ static int putreg(struct task_struct *child,
 	case offsetof(struct user_regs_struct,fs_base):
 		if (value >= TASK_SIZE_MAX)
 			return -EIO;
-		/*
-		 * When changing the FS base, use do_arch_prctl_64()
-		 * to set the index to zero and to set the base
-		 * as requested.
-		 *
-		 * NB: This behavior is nonsensical and likely needs to
-		 * change when FSGSBASE support is added.
-		 */
-		if (child->thread.fsbase != value)
-			return do_arch_prctl_64(child, ARCH_SET_FS, value);
+		x86_fsbase_write_task(child, value);
 		return 0;
 	case offsetof(struct user_regs_struct,gs_base):
-		/*
-		 * Exactly the same here as the %fs handling above.
-		 */
 		if (value >= TASK_SIZE_MAX)
 			return -EIO;
-		if (child->thread.gsbase != value)
-			return do_arch_prctl_64(child, ARCH_SET_GS, value);
+		x86_gsbase_write_task(child, value);
 		return 0;
 #endif
 	}
@@ -880,14 +859,39 @@ long arch_ptrace(struct task_struct *child, long request,
 static int putreg32(struct task_struct *child, unsigned regno, u32 value)
 {
 	struct pt_regs *regs = task_pt_regs(child);
+	int ret;
 
 	switch (regno) {
 
 	SEG32(cs);
 	SEG32(ds);
 	SEG32(es);
-	SEG32(fs);
-	SEG32(gs);
+
+	/*
+	 * A 32-bit ptracer on a 64-bit kernel expects that writing
+	 * FS or GS will also update the base.  This is needed for
+	 * operations like PTRACE_SETREGS to fully restore a saved
+	 * CPU state.
+	 */
+
+	case offsetof(struct user32, regs.fs):
+		ret = set_segment_reg(child,
+				      offsetof(struct user_regs_struct, fs),
+				      value);
+		if (ret == 0)
+			child->thread.fsbase =
+				x86_fsgsbase_read_task(child, value);
+		return ret;
+
+	case offsetof(struct user32, regs.gs):
+		ret = set_segment_reg(child,
+				      offsetof(struct user_regs_struct, gs),
+				      value);
+		if (ret == 0)
+			child->thread.gsbase =
+				x86_fsgsbase_read_task(child, value);
+		return ret;
+
 	SEG32(ss);
 
 	R32(ebx, bx);
diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c
index 896d74cb5081..1b10717c9321 100644
--- a/arch/x86/kernel/quirks.c
+++ b/arch/x86/kernel/quirks.c
@@ -95,7 +95,7 @@ static void ich_force_hpet_resume(void)
 static void ich_force_enable_hpet(struct pci_dev *dev)
 {
 	u32 val;
-	u32 uninitialized_var(rcba);
+	u32 rcba;
 	int err = 0;
 
 	if (hpet_address || force_hpet_address)
@@ -185,7 +185,7 @@ static void hpet_print_force_info(void)
 static void old_ich_force_hpet_resume(void)
 {
 	u32 val;
-	u32 uninitialized_var(gen_cntl);
+	u32 gen_cntl;
 
 	if (!force_hpet_address || !cached_dev)
 		return;
@@ -207,7 +207,7 @@ static void old_ich_force_hpet_resume(void)
 static void old_ich_force_enable_hpet(struct pci_dev *dev)
 {
 	u32 val;
-	u32 uninitialized_var(gen_cntl);
+	u32 gen_cntl;
 
 	if (hpet_address || force_hpet_address)
 		return;
@@ -298,7 +298,7 @@ static void vt8237_force_hpet_resume(void)
 
 static void vt8237_force_enable_hpet(struct pci_dev *dev)
 {
-	u32 uninitialized_var(val);
+	u32 val;
 
 	if (hpet_address || force_hpet_address)
 		return;
@@ -429,7 +429,7 @@ static void nvidia_force_hpet_resume(void)
 
 static void nvidia_force_enable_hpet(struct pci_dev *dev)
 {
-	u32 uninitialized_var(val);
+	u32 val;
 
 	if (hpet_address || force_hpet_address)
 		return;
diff --git a/arch/x86/kernel/signal.c b/arch/x86/kernel/signal.c
index 399f97abee02..d5fa494c2304 100644
--- a/arch/x86/kernel/signal.c
+++ b/arch/x86/kernel/signal.c
@@ -25,6 +25,7 @@
 #include <linux/user-return-notifier.h>
 #include <linux/uprobes.h>
 #include <linux/context_tracking.h>
+#include <linux/entry-common.h>
 #include <linux/syscalls.h>
 
 #include <asm/processor.h>
@@ -803,7 +804,7 @@ static inline unsigned long get_nr_restart_syscall(const struct pt_regs *regs)
  * want to handle. Thus you cannot kill init even with a SIGKILL even by
  * mistake.
  */
-void do_signal(struct pt_regs *regs)
+void arch_do_signal(struct pt_regs *regs)
 {
 	struct ksignal ksig;
 
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index ffbd9a3d78d8..27aa04a95702 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -51,11 +51,11 @@
 #include <linux/err.h>
 #include <linux/nmi.h>
 #include <linux/tboot.h>
-#include <linux/stackprotector.h>
 #include <linux/gfp.h>
 #include <linux/cpuidle.h>
 #include <linux/numa.h>
 #include <linux/pgtable.h>
+#include <linux/overflow.h>
 
 #include <asm/acpi.h>
 #include <asm/desc.h>
@@ -80,6 +80,7 @@
 #include <asm/cpu_device_id.h>
 #include <asm/spec-ctrl.h>
 #include <asm/hw_irq.h>
+#include <asm/stackprotector.h>
 
 /* representing HT siblings of each logical CPU */
 DEFINE_PER_CPU_READ_MOSTLY(cpumask_var_t, cpu_sibling_map);
@@ -259,21 +260,10 @@ static void notrace start_secondary(void *unused)
 	/* enable local interrupts */
 	local_irq_enable();
 
-	/* to prevent fake stack check failure in clock setup */
-	boot_init_stack_canary();
-
 	x86_cpuinit.setup_percpu_clockev();
 
 	wmb();
 	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
-
-	/*
-	 * Prevent tail call to cpu_startup_entry() because the stack protector
-	 * guard has been changed a couple of function calls up, in
-	 * boot_init_stack_canary() and must not be checked before tail calling
-	 * another function.
-	 */
-	prevent_tail_call_optimization();
 }
 
 /**
@@ -1011,6 +1001,7 @@ int common_cpu_up(unsigned int cpu, struct task_struct *idle)
 	alternatives_enable_smp();
 
 	per_cpu(current_task, cpu) = idle;
+	cpu_init_stack_canary(cpu, idle);
 
 	/* Initialize the interrupt stack(s) */
 	ret = irq_init_percpu_irqstack(cpu);
@@ -1777,6 +1768,7 @@ void native_play_dead(void)
 
 #endif
 
+#ifdef CONFIG_X86_64
 /*
  * APERF/MPERF frequency ratio computation.
  *
@@ -1975,6 +1967,7 @@ static bool core_set_max_freq_ratio(u64 *base_freq, u64 *turbo_freq)
 static bool intel_set_max_freq_ratio(void)
 {
 	u64 base_freq, turbo_freq;
+	u64 turbo_ratio;
 
 	if (slv_set_max_freq_ratio(&base_freq, &turbo_freq))
 		goto out;
@@ -2000,15 +1993,23 @@ out:
 	/*
 	 * Some hypervisors advertise X86_FEATURE_APERFMPERF
 	 * but then fill all MSR's with zeroes.
+	 * Some CPUs have turbo boost but don't declare any turbo ratio
+	 * in MSR_TURBO_RATIO_LIMIT.
 	 */
-	if (!base_freq) {
-		pr_debug("Couldn't determine cpu base frequency, necessary for scale-invariant accounting.\n");
+	if (!base_freq || !turbo_freq) {
+		pr_debug("Couldn't determine cpu base or turbo frequency, necessary for scale-invariant accounting.\n");
 		return false;
 	}
 
-	arch_turbo_freq_ratio = div_u64(turbo_freq * SCHED_CAPACITY_SCALE,
-					base_freq);
+	turbo_ratio = div_u64(turbo_freq * SCHED_CAPACITY_SCALE, base_freq);
+	if (!turbo_ratio) {
+		pr_debug("Non-zero turbo and base frequencies led to a 0 ratio.\n");
+		return false;
+	}
+
+	arch_turbo_freq_ratio = turbo_ratio;
 	arch_set_max_freq_ratio(turbo_disabled());
+
 	return true;
 }
 
@@ -2048,11 +2049,19 @@ static void init_freq_invariance(bool secondary)
 	}
 }
 
+static void disable_freq_invariance_workfn(struct work_struct *work)
+{
+	static_branch_disable(&arch_scale_freq_key);
+}
+
+static DECLARE_WORK(disable_freq_invariance_work,
+		    disable_freq_invariance_workfn);
+
 DEFINE_PER_CPU(unsigned long, arch_freq_scale) = SCHED_CAPACITY_SCALE;
 
 void arch_scale_freq_tick(void)
 {
-	u64 freq_scale;
+	u64 freq_scale = SCHED_CAPACITY_SCALE;
 	u64 aperf, mperf;
 	u64 acnt, mcnt;
 
@@ -2064,19 +2073,32 @@ void arch_scale_freq_tick(void)
 
 	acnt = aperf - this_cpu_read(arch_prev_aperf);
 	mcnt = mperf - this_cpu_read(arch_prev_mperf);
-	if (!mcnt)
-		return;
 
 	this_cpu_write(arch_prev_aperf, aperf);
 	this_cpu_write(arch_prev_mperf, mperf);
 
-	acnt <<= 2*SCHED_CAPACITY_SHIFT;
-	mcnt *= arch_max_freq_ratio;
+	if (check_shl_overflow(acnt, 2*SCHED_CAPACITY_SHIFT, &acnt))
+		goto error;
+
+	if (check_mul_overflow(mcnt, arch_max_freq_ratio, &mcnt) || !mcnt)
+		goto error;
 
 	freq_scale = div64_u64(acnt, mcnt);
+	if (!freq_scale)
+		goto error;
 
 	if (freq_scale > SCHED_CAPACITY_SCALE)
 		freq_scale = SCHED_CAPACITY_SCALE;
 
 	this_cpu_write(arch_freq_scale, freq_scale);
+	return;
+
+error:
+	pr_warn("Scheduler frequency invariance went wobbly, disabling!\n");
+	schedule_work(&disable_freq_invariance_work);
+}
+#else
+static inline void init_freq_invariance(bool secondary)
+{
 }
+#endif /* CONFIG_X86_64 */
diff --git a/arch/x86/kernel/stacktrace.c b/arch/x86/kernel/stacktrace.c
index 6ad43fc44556..2fd698e28e4d 100644
--- a/arch/x86/kernel/stacktrace.c
+++ b/arch/x86/kernel/stacktrace.c
@@ -58,7 +58,6 @@ int arch_stack_walk_reliable(stack_trace_consume_fn consume_entry,
 			 * or a page fault), which can make frame pointers
 			 * unreliable.
 			 */
-
 			if (IS_ENABLED(CONFIG_FRAME_POINTER))
 				return -EINVAL;
 		}
@@ -81,10 +80,6 @@ int arch_stack_walk_reliable(stack_trace_consume_fn consume_entry,
 	if (unwind_error(&state))
 		return -EINVAL;
 
-	/* Success path for non-user tasks, i.e. kthreads and idle tasks */
-	if (!(task->flags & (PF_KTHREAD | PF_IDLE)))
-		return -EINVAL;
-
 	return 0;
 }
 
diff --git a/arch/x86/kernel/sys_ia32.c b/arch/x86/kernel/sys_ia32.c
index f8d65c99feb8..720cde885042 100644
--- a/arch/x86/kernel/sys_ia32.c
+++ b/arch/x86/kernel/sys_ia32.c
@@ -251,9 +251,6 @@ COMPAT_SYSCALL_DEFINE5(ia32_clone, unsigned long, clone_flags,
 		.tls		= tls_val,
 	};
 
-	if (!legacy_clone_args_valid(&args))
-		return -EINVAL;
-
 	return _do_fork(&args);
 }
 #endif /* CONFIG_IA32_EMULATION */
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index af75109485c2..438fc554d48d 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -84,17 +84,16 @@ static inline void cond_local_irq_disable(struct pt_regs *regs)
 		local_irq_disable();
 }
 
-int is_valid_bugaddr(unsigned long addr)
+__always_inline int is_valid_bugaddr(unsigned long addr)
 {
-	unsigned short ud;
-
 	if (addr < TASK_SIZE_MAX)
 		return 0;
 
-	if (probe_kernel_address((unsigned short *)addr, ud))
-		return 0;
-
-	return ud == INSN_UD0 || ud == INSN_UD2;
+	/*
+	 * We got #UD, if the text isn't readable we'd have gotten
+	 * a different exception.
+	 */
+	return *(unsigned short *)addr == INSN_UD2;
 }
 
 static nokprobe_inline int
@@ -216,46 +215,51 @@ static inline void handle_invalid_op(struct pt_regs *regs)
 		      ILL_ILLOPN, error_get_trap_addr(regs));
 }
 
-DEFINE_IDTENTRY_RAW(exc_invalid_op)
+static noinstr bool handle_bug(struct pt_regs *regs)
 {
-	bool rcu_exit;
+	bool handled = false;
+
+	if (!is_valid_bugaddr(regs->ip))
+		return handled;
 
 	/*
-	 * Handle BUG/WARN like NMIs instead of like normal idtentries:
-	 * if we bugged/warned in a bad RCU context, for example, the last
-	 * thing we want is to BUG/WARN again in the idtentry code, ad
-	 * infinitum.
+	 * All lies, just get the WARN/BUG out.
+	 */
+	instrumentation_begin();
+	/*
+	 * Since we're emulating a CALL with exceptions, restore the interrupt
+	 * state to what it was at the exception site.
 	 */
-	if (!user_mode(regs) && is_valid_bugaddr(regs->ip)) {
-		enum bug_trap_type type;
+	if (regs->flags & X86_EFLAGS_IF)
+		raw_local_irq_enable();
+	if (report_bug(regs->ip, regs) == BUG_TRAP_TYPE_WARN) {
+		regs->ip += LEN_UD2;
+		handled = true;
+	}
+	if (regs->flags & X86_EFLAGS_IF)
+		raw_local_irq_disable();
+	instrumentation_end();
 
-		nmi_enter();
-		instrumentation_begin();
-		trace_hardirqs_off_finish();
-		type = report_bug(regs->ip, regs);
-		if (regs->flags & X86_EFLAGS_IF)
-			trace_hardirqs_on_prepare();
-		instrumentation_end();
-		nmi_exit();
+	return handled;
+}
 
-		if (type == BUG_TRAP_TYPE_WARN) {
-			/* Skip the ud2. */
-			regs->ip += LEN_UD2;
-			return;
-		}
+DEFINE_IDTENTRY_RAW(exc_invalid_op)
+{
+	irqentry_state_t state;
 
-		/*
-		 * Else, if this was a BUG and report_bug returns or if this
-		 * was just a normal #UD, we want to continue onward and
-		 * crash.
-		 */
-	}
+	/*
+	 * We use UD2 as a short encoding for 'CALL __WARN', as such
+	 * handle it before exception entry to avoid recursive WARN
+	 * in case exception entry is the one triggering WARNs.
+	 */
+	if (!user_mode(regs) && handle_bug(regs))
+		return;
 
-	rcu_exit = idtentry_enter_cond_rcu(regs);
+	state = irqentry_enter(regs);
 	instrumentation_begin();
 	handle_invalid_op(regs);
 	instrumentation_end();
-	idtentry_exit_cond_rcu(regs, rcu_exit);
+	irqentry_exit(regs, state);
 }
 
 DEFINE_IDTENTRY(exc_coproc_segment_overrun)
@@ -299,6 +303,8 @@ DEFINE_IDTENTRY_ERRORCODE(exc_alignment_check)
 
 	do_trap(X86_TRAP_AC, SIGBUS, "alignment check", regs,
 		error_code, BUS_ADRALN, NULL);
+
+	local_irq_disable();
 }
 
 #ifdef CONFIG_VMAP_STACK
@@ -399,7 +405,7 @@ DEFINE_IDTENTRY_DF(exc_double_fault)
 	}
 #endif
 
-	nmi_enter();
+	idtentry_enter_nmi(regs);
 	instrumentation_begin();
 	notify_die(DIE_TRAP, str, regs, error_code, X86_TRAP_DF, SIGSEGV);
 
@@ -488,7 +494,8 @@ static enum kernel_gp_hint get_kernel_gp_address(struct pt_regs *regs,
 	u8 insn_buf[MAX_INSN_SIZE];
 	struct insn insn;
 
-	if (probe_kernel_read(insn_buf, (void *)regs->ip, MAX_INSN_SIZE))
+	if (copy_from_kernel_nofault(insn_buf, (void *)regs->ip,
+			MAX_INSN_SIZE))
 		return GP_NO_HINT;
 
 	kernel_insn_init(&insn, insn_buf, MAX_INSN_SIZE);
@@ -631,28 +638,25 @@ DEFINE_IDTENTRY_RAW(exc_int3)
 		return;
 
 	/*
-	 * idtentry_enter_user() uses static_branch_{,un}likely() and therefore
-	 * can trigger INT3, hence poke_int3_handler() must be done
-	 * before. If the entry came from kernel mode, then use nmi_enter()
-	 * because the INT3 could have been hit in any context including
-	 * NMI.
+	 * irqentry_enter_from_user_mode() uses static_branch_{,un}likely()
+	 * and therefore can trigger INT3, hence poke_int3_handler() must
+	 * be done before. If the entry came from kernel mode, then use
+	 * nmi_enter() because the INT3 could have been hit in any context
+	 * including NMI.
 	 */
 	if (user_mode(regs)) {
-		idtentry_enter_user(regs);
+		irqentry_enter_from_user_mode(regs);
 		instrumentation_begin();
 		do_int3_user(regs);
 		instrumentation_end();
-		idtentry_exit_user(regs);
+		irqentry_exit_to_user_mode(regs);
 	} else {
-		nmi_enter();
+		bool irq_state = idtentry_enter_nmi(regs);
 		instrumentation_begin();
-		trace_hardirqs_off_finish();
 		if (!do_int3(regs))
 			die("int3", regs, 0);
-		if (regs->flags & X86_EFLAGS_IF)
-			trace_hardirqs_on_prepare();
 		instrumentation_end();
-		nmi_exit();
+		idtentry_exit_nmi(regs, irq_state);
 	}
 }
 
@@ -690,13 +694,13 @@ struct bad_iret_stack *fixup_bad_iret(struct bad_iret_stack *s)
 		(struct bad_iret_stack *)__this_cpu_read(cpu_tss_rw.x86_tss.sp0) - 1;
 
 	/* Copy the IRET target to the temporary storage. */
-	memcpy(&tmp.regs.ip, (void *)s->regs.sp, 5*8);
+	__memcpy(&tmp.regs.ip, (void *)s->regs.sp, 5*8);
 
 	/* Copy the remainder of the stack from the current stack. */
-	memcpy(&tmp, s, offsetof(struct bad_iret_stack, regs.ip));
+	__memcpy(&tmp, s, offsetof(struct bad_iret_stack, regs.ip));
 
 	/* Update the entry stack */
-	memcpy(new_stack, &tmp, sizeof(tmp));
+	__memcpy(new_stack, &tmp, sizeof(tmp));
 
 	BUG_ON(!user_mode(&new_stack->regs));
 	return new_stack;
@@ -860,9 +864,14 @@ out:
 static __always_inline void exc_debug_kernel(struct pt_regs *regs,
 					     unsigned long dr6)
 {
-	nmi_enter();
+	bool irq_state = idtentry_enter_nmi(regs);
 	instrumentation_begin();
-	trace_hardirqs_off_finish();
+
+	/*
+	 * If something gets miswired and we end up here for a user mode
+	 * #DB, we will malfunction.
+	 */
+	WARN_ON_ONCE(user_mode(regs));
 
 	/*
 	 * Catch SYSENTER with TF set and clear DR_STEP. If this hit a
@@ -873,21 +882,26 @@ static __always_inline void exc_debug_kernel(struct pt_regs *regs,
 
 	handle_debug(regs, dr6, false);
 
-	if (regs->flags & X86_EFLAGS_IF)
-		trace_hardirqs_on_prepare();
 	instrumentation_end();
-	nmi_exit();
+	idtentry_exit_nmi(regs, irq_state);
 }
 
 static __always_inline void exc_debug_user(struct pt_regs *regs,
 					   unsigned long dr6)
 {
-	idtentry_enter_user(regs);
+	/*
+	 * If something gets miswired and we end up here for a kernel mode
+	 * #DB, we will malfunction.
+	 */
+	WARN_ON_ONCE(!user_mode(regs));
+
+	irqentry_enter_from_user_mode(regs);
 	instrumentation_begin();
 
 	handle_debug(regs, dr6, true);
+
 	instrumentation_end();
-	idtentry_exit_user(regs);
+	irqentry_exit_to_user_mode(regs);
 }
 
 #ifdef CONFIG_X86_64
@@ -912,7 +926,7 @@ DEFINE_IDTENTRY_DEBUG_USER(exc_debug)
 }
 #else
 /* 32 bit does not have separate entry points. */
-DEFINE_IDTENTRY_DEBUG(exc_debug)
+DEFINE_IDTENTRY_RAW(exc_debug)
 {
 	unsigned long dr6, dr7;
 
diff --git a/arch/x86/kernel/unwind_frame.c b/arch/x86/kernel/unwind_frame.c
index 722a85f3b2dd..d7c44b257f7f 100644
--- a/arch/x86/kernel/unwind_frame.c
+++ b/arch/x86/kernel/unwind_frame.c
@@ -269,13 +269,13 @@ bool unwind_next_frame(struct unwind_state *state)
 		/*
 		 * kthreads (other than the boot CPU's idle thread) have some
 		 * partial regs at the end of their stack which were placed
-		 * there by copy_thread_tls().  But the regs don't have any
+		 * there by copy_thread().  But the regs don't have any
 		 * useful information, so we can skip them.
 		 *
 		 * This user_mode() check is slightly broader than a PF_KTHREAD
 		 * check because it also catches the awkward situation where a
 		 * newly forked kthread transitions into a user task by calling
-		 * do_execve(), which eventually clears PF_KTHREAD.
+		 * kernel_execve(), which eventually clears PF_KTHREAD.
 		 */
 		if (!user_mode(regs))
 			goto the_end;
diff --git a/arch/x86/kernel/unwind_orc.c b/arch/x86/kernel/unwind_orc.c
index 7f969b2d240f..ec88bbe08a32 100644
--- a/arch/x86/kernel/unwind_orc.c
+++ b/arch/x86/kernel/unwind_orc.c
@@ -440,8 +440,11 @@ bool unwind_next_frame(struct unwind_state *state)
 	/*
 	 * Find the orc_entry associated with the text address.
 	 *
-	 * Decrement call return addresses by one so they work for sibling
-	 * calls and calls to noreturn functions.
+	 * For a call frame (as opposed to a signal frame), state->ip points to
+	 * the instruction after the call.  That instruction's stack layout
+	 * could be different from the call instruction's layout, for example
+	 * if the call was to a noreturn function.  So get the ORC data for the
+	 * call instruction itself.
 	 */
 	orc = orc_find(state->signal ? state->ip : state->ip - 1);
 	if (!orc) {
@@ -662,6 +665,7 @@ void __unwind_start(struct unwind_state *state, struct task_struct *task,
 		state->sp = task->thread.sp;
 		state->bp = READ_ONCE_NOCHECK(frame->bp);
 		state->ip = READ_ONCE_NOCHECK(frame->ret_addr);
+		state->signal = (void *)state->ip == ret_from_fork;
 	}
 
 	if (get_stack_info((unsigned long *)state->sp, state->task,
diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index 3bfc8dd8a43d..9a03e5b23135 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -358,6 +358,7 @@ SECTIONS
 	.bss : AT(ADDR(.bss) - LOAD_OFFSET) {
 		__bss_start = .;
 		*(.bss..page_aligned)
+		. = ALIGN(PAGE_SIZE);
 		*(BSS_MAIN)
 		BSS_DECRYPTED
 		. = ALIGN(PAGE_SIZE);
diff --git a/arch/x86/kvm/Kconfig b/arch/x86/kvm/Kconfig
index b277a2db6267..fbd5bd7a945a 100644
--- a/arch/x86/kvm/Kconfig
+++ b/arch/x86/kvm/Kconfig
@@ -42,6 +42,7 @@ config KVM
 	select HAVE_KVM_MSI
 	select HAVE_KVM_CPU_RELAX_INTERCEPT
 	select HAVE_KVM_NO_POLL
+	select KVM_XFER_TO_GUEST_WORK
 	select KVM_GENERIC_DIRTYLOG_READ_PROTECT
 	select KVM_VFIO
 	select SRCU
diff --git a/arch/x86/kvm/kvm_cache_regs.h b/arch/x86/kvm/kvm_cache_regs.h
index ff2d0e9ca3bc..cfe83d4ae625 100644
--- a/arch/x86/kvm/kvm_cache_regs.h
+++ b/arch/x86/kvm/kvm_cache_regs.h
@@ -7,7 +7,7 @@
 #define KVM_POSSIBLE_CR0_GUEST_BITS X86_CR0_TS
 #define KVM_POSSIBLE_CR4_GUEST_BITS				  \
 	(X86_CR4_PVI | X86_CR4_DE | X86_CR4_PCE | X86_CR4_OSFXSR  \
-	 | X86_CR4_OSXMMEXCPT | X86_CR4_LA57 | X86_CR4_PGE)
+	 | X86_CR4_OSXMMEXCPT | X86_CR4_LA57 | X86_CR4_PGE | X86_CR4_TSD)
 
 #define BUILD_KVM_GPR_ACCESSORS(lname, uname)				      \
 static __always_inline unsigned long kvm_##lname##_read(struct kvm_vcpu *vcpu)\
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 34a7e0533dad..4ce2ddd26c0b 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -169,6 +169,18 @@ static void kvm_apic_map_free(struct rcu_head *rcu)
 	kvfree(map);
 }
 
+/*
+ * CLEAN -> DIRTY and UPDATE_IN_PROGRESS -> DIRTY changes happen without a lock.
+ *
+ * DIRTY -> UPDATE_IN_PROGRESS and UPDATE_IN_PROGRESS -> CLEAN happen with
+ * apic_map_lock_held.
+ */
+enum {
+	CLEAN,
+	UPDATE_IN_PROGRESS,
+	DIRTY
+};
+
 void kvm_recalculate_apic_map(struct kvm *kvm)
 {
 	struct kvm_apic_map *new, *old = NULL;
@@ -176,17 +188,17 @@ void kvm_recalculate_apic_map(struct kvm *kvm)
 	int i;
 	u32 max_id = 255; /* enough space for any xAPIC ID */
 
-	if (!kvm->arch.apic_map_dirty) {
-		/*
-		 * Read kvm->arch.apic_map_dirty before
-		 * kvm->arch.apic_map
-		 */
-		smp_rmb();
+	/* Read kvm->arch.apic_map_dirty before kvm->arch.apic_map.  */
+	if (atomic_read_acquire(&kvm->arch.apic_map_dirty) == CLEAN)
 		return;
-	}
 
 	mutex_lock(&kvm->arch.apic_map_lock);
-	if (!kvm->arch.apic_map_dirty) {
+	/*
+	 * Read kvm->arch.apic_map_dirty before kvm->arch.apic_map
+	 * (if clean) or the APIC registers (if dirty).
+	 */
+	if (atomic_cmpxchg_acquire(&kvm->arch.apic_map_dirty,
+				   DIRTY, UPDATE_IN_PROGRESS) == CLEAN) {
 		/* Someone else has updated the map. */
 		mutex_unlock(&kvm->arch.apic_map_lock);
 		return;
@@ -256,11 +268,11 @@ out:
 			lockdep_is_held(&kvm->arch.apic_map_lock));
 	rcu_assign_pointer(kvm->arch.apic_map, new);
 	/*
-	 * Write kvm->arch.apic_map before
-	 * clearing apic->apic_map_dirty
+	 * Write kvm->arch.apic_map before clearing apic->apic_map_dirty.
+	 * If another update has come in, leave it DIRTY.
 	 */
-	smp_wmb();
-	kvm->arch.apic_map_dirty = false;
+	atomic_cmpxchg_release(&kvm->arch.apic_map_dirty,
+			       UPDATE_IN_PROGRESS, CLEAN);
 	mutex_unlock(&kvm->arch.apic_map_lock);
 
 	if (old)
@@ -282,20 +294,20 @@ static inline void apic_set_spiv(struct kvm_lapic *apic, u32 val)
 		else
 			static_key_slow_inc(&apic_sw_disabled.key);
 
-		apic->vcpu->kvm->arch.apic_map_dirty = true;
+		atomic_set_release(&apic->vcpu->kvm->arch.apic_map_dirty, DIRTY);
 	}
 }
 
 static inline void kvm_apic_set_xapic_id(struct kvm_lapic *apic, u8 id)
 {
 	kvm_lapic_set_reg(apic, APIC_ID, id << 24);
-	apic->vcpu->kvm->arch.apic_map_dirty = true;
+	atomic_set_release(&apic->vcpu->kvm->arch.apic_map_dirty, DIRTY);
 }
 
 static inline void kvm_apic_set_ldr(struct kvm_lapic *apic, u32 id)
 {
 	kvm_lapic_set_reg(apic, APIC_LDR, id);
-	apic->vcpu->kvm->arch.apic_map_dirty = true;
+	atomic_set_release(&apic->vcpu->kvm->arch.apic_map_dirty, DIRTY);
 }
 
 static inline u32 kvm_apic_calc_x2apic_ldr(u32 id)
@@ -311,7 +323,7 @@ static inline void kvm_apic_set_x2apic_id(struct kvm_lapic *apic, u32 id)
 
 	kvm_lapic_set_reg(apic, APIC_ID, id);
 	kvm_lapic_set_reg(apic, APIC_LDR, ldr);
-	apic->vcpu->kvm->arch.apic_map_dirty = true;
+	atomic_set_release(&apic->vcpu->kvm->arch.apic_map_dirty, DIRTY);
 }
 
 static inline int apic_lvt_enabled(struct kvm_lapic *apic, int lvt_type)
@@ -1976,7 +1988,7 @@ int kvm_lapic_reg_write(struct kvm_lapic *apic, u32 reg, u32 val)
 	case APIC_DFR:
 		if (!apic_x2apic_mode(apic)) {
 			kvm_lapic_set_reg(apic, APIC_DFR, val | 0x0FFFFFFF);
-			apic->vcpu->kvm->arch.apic_map_dirty = true;
+			atomic_set_release(&apic->vcpu->kvm->arch.apic_map_dirty, DIRTY);
 		} else
 			ret = 1;
 		break;
@@ -2183,7 +2195,7 @@ void kvm_set_lapic_tscdeadline_msr(struct kvm_vcpu *vcpu, u64 data)
 {
 	struct kvm_lapic *apic = vcpu->arch.apic;
 
-	if (!lapic_in_kernel(vcpu) || apic_lvtt_oneshot(apic) ||
+	if (!kvm_apic_present(vcpu) || apic_lvtt_oneshot(apic) ||
 			apic_lvtt_period(apic))
 		return;
 
@@ -2232,7 +2244,7 @@ void kvm_lapic_set_base(struct kvm_vcpu *vcpu, u64 value)
 			static_key_slow_dec_deferred(&apic_hw_disabled);
 		} else {
 			static_key_slow_inc(&apic_hw_disabled.key);
-			vcpu->kvm->arch.apic_map_dirty = true;
+			atomic_set_release(&apic->vcpu->kvm->arch.apic_map_dirty, DIRTY);
 		}
 	}
 
@@ -2273,7 +2285,6 @@ void kvm_lapic_reset(struct kvm_vcpu *vcpu, bool init_event)
 	if (!apic)
 		return;
 
-	vcpu->kvm->arch.apic_map_dirty = false;
 	/* Stop the timer in case it's a reset to an active apic */
 	hrtimer_cancel(&apic->lapic_timer.timer);
 
@@ -2567,6 +2578,7 @@ int kvm_apic_set_state(struct kvm_vcpu *vcpu, struct kvm_lapic_state *s)
 	}
 	memcpy(vcpu->arch.apic->regs, s->regs, sizeof(*s));
 
+	atomic_set_release(&apic->vcpu->kvm->arch.apic_map_dirty, DIRTY);
 	kvm_recalculate_apic_map(vcpu->kvm);
 	kvm_apic_set_version(vcpu);
 
diff --git a/arch/x86/kvm/mmu.h b/arch/x86/kvm/mmu.h
index 0ad06bfe2c2c..444bb9c54548 100644
--- a/arch/x86/kvm/mmu.h
+++ b/arch/x86/kvm/mmu.h
@@ -222,7 +222,7 @@ void kvm_mmu_gfn_disallow_lpage(struct kvm_memory_slot *slot, gfn_t gfn);
 void kvm_mmu_gfn_allow_lpage(struct kvm_memory_slot *slot, gfn_t gfn);
 bool kvm_mmu_slot_gfn_write_protect(struct kvm *kvm,
 				    struct kvm_memory_slot *slot, u64 gfn);
-int kvm_arch_write_log_dirty(struct kvm_vcpu *vcpu);
+int kvm_arch_write_log_dirty(struct kvm_vcpu *vcpu, gpa_t l2_gpa);
 
 int kvm_mmu_post_init_vm(struct kvm *kvm);
 void kvm_mmu_pre_destroy_vm(struct kvm *kvm);
diff --git a/arch/x86/kvm/mmu/mmu.c b/arch/x86/kvm/mmu/mmu.c
index fdd05c233308..e2e2e5cc7dc6 100644
--- a/arch/x86/kvm/mmu/mmu.c
+++ b/arch/x86/kvm/mmu/mmu.c
@@ -1745,10 +1745,10 @@ void kvm_arch_mmu_enable_log_dirty_pt_masked(struct kvm *kvm,
  * Emulate arch specific page modification logging for the
  * nested hypervisor
  */
-int kvm_arch_write_log_dirty(struct kvm_vcpu *vcpu)
+int kvm_arch_write_log_dirty(struct kvm_vcpu *vcpu, gpa_t l2_gpa)
 {
 	if (kvm_x86_ops.write_log_dirty)
-		return kvm_x86_ops.write_log_dirty(vcpu);
+		return kvm_x86_ops.write_log_dirty(vcpu, l2_gpa);
 
 	return 0;
 }
@@ -1986,7 +1986,7 @@ static int kvm_age_rmapp(struct kvm *kvm, struct kvm_rmap_head *rmap_head,
 			 unsigned long data)
 {
 	u64 *sptep;
-	struct rmap_iterator uninitialized_var(iter);
+	struct rmap_iterator iter;
 	int young = 0;
 
 	for_each_rmap_spte(rmap_head, &iter, sptep)
@@ -4449,7 +4449,7 @@ __reset_rsvds_bits_mask(struct kvm_vcpu *vcpu,
 			nonleaf_bit8_rsvd | rsvd_bits(7, 7) |
 			rsvd_bits(maxphyaddr, 51);
 		rsvd_check->rsvd_bits_mask[0][2] = exb_bit_rsvd |
-			nonleaf_bit8_rsvd | gbpages_bit_rsvd |
+			gbpages_bit_rsvd |
 			rsvd_bits(maxphyaddr, 51);
 		rsvd_check->rsvd_bits_mask[0][1] = exb_bit_rsvd |
 			rsvd_bits(maxphyaddr, 51);
diff --git a/arch/x86/kvm/mmu/paging_tmpl.h b/arch/x86/kvm/mmu/paging_tmpl.h
index a6d484ea110b..275564a0ebdb 100644
--- a/arch/x86/kvm/mmu/paging_tmpl.h
+++ b/arch/x86/kvm/mmu/paging_tmpl.h
@@ -235,7 +235,7 @@ static inline unsigned FNAME(gpte_access)(u64 gpte)
 static int FNAME(update_accessed_dirty_bits)(struct kvm_vcpu *vcpu,
 					     struct kvm_mmu *mmu,
 					     struct guest_walker *walker,
-					     int write_fault)
+					     gpa_t addr, int write_fault)
 {
 	unsigned level, index;
 	pt_element_t pte, orig_pte;
@@ -260,7 +260,7 @@ static int FNAME(update_accessed_dirty_bits)(struct kvm_vcpu *vcpu,
 				!(pte & PT_GUEST_DIRTY_MASK)) {
 			trace_kvm_mmu_set_dirty_bit(table_gfn, index, sizeof(pte));
 #if PTTYPE == PTTYPE_EPT
-			if (kvm_arch_write_log_dirty(vcpu))
+			if (kvm_arch_write_log_dirty(vcpu, addr))
 				return -EINVAL;
 #endif
 			pte |= PT_GUEST_DIRTY_MASK;
@@ -314,7 +314,7 @@ static int FNAME(walk_addr_generic)(struct guest_walker *walker,
 {
 	int ret;
 	pt_element_t pte;
-	pt_element_t __user *uninitialized_var(ptep_user);
+	pt_element_t __user *ptep_user;
 	gfn_t table_gfn;
 	u64 pt_access, pte_access;
 	unsigned index, accessed_dirty, pte_pkey;
@@ -360,7 +360,6 @@ retry_walk:
 	++walker->level;
 
 	do {
-		gfn_t real_gfn;
 		unsigned long host_addr;
 
 		pt_access = pte_access;
@@ -375,7 +374,7 @@ retry_walk:
 		walker->table_gfn[walker->level - 1] = table_gfn;
 		walker->pte_gpa[walker->level - 1] = pte_gpa;
 
-		real_gfn = mmu->translate_gpa(vcpu, gfn_to_gpa(table_gfn),
+		real_gpa = mmu->translate_gpa(vcpu, gfn_to_gpa(table_gfn),
 					      nested_access,
 					      &walker->fault);
 
@@ -389,12 +388,10 @@ retry_walk:
 		 * information to fix the exit_qualification or exit_info_1
 		 * fields.
 		 */
-		if (unlikely(real_gfn == UNMAPPED_GVA))
+		if (unlikely(real_gpa == UNMAPPED_GVA))
 			return 0;
 
-		real_gfn = gpa_to_gfn(real_gfn);
-
-		host_addr = kvm_vcpu_gfn_to_hva_prot(vcpu, real_gfn,
+		host_addr = kvm_vcpu_gfn_to_hva_prot(vcpu, gpa_to_gfn(real_gpa),
 					    &walker->pte_writable[walker->level - 1]);
 		if (unlikely(kvm_is_error_hva(host_addr)))
 			goto error;
@@ -457,7 +454,8 @@ retry_walk:
 			(PT_GUEST_DIRTY_SHIFT - PT_GUEST_ACCESSED_SHIFT);
 
 	if (unlikely(!accessed_dirty)) {
-		ret = FNAME(update_accessed_dirty_bits)(vcpu, mmu, walker, write_fault);
+		ret = FNAME(update_accessed_dirty_bits)(vcpu, mmu, walker,
+							addr, write_fault);
 		if (unlikely(ret < 0))
 			goto error;
 		else if (ret)
diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c
index 8ccfa4197d9c..5bbf76189afa 100644
--- a/arch/x86/kvm/svm/svm.c
+++ b/arch/x86/kvm/svm/svm.c
@@ -1090,7 +1090,7 @@ static void init_vmcb(struct vcpu_svm *svm)
 	svm->nested.vmcb = 0;
 	svm->vcpu.arch.hflags = 0;
 
-	if (pause_filter_count) {
+	if (!kvm_pause_in_guest(svm->vcpu.kvm)) {
 		control->pause_filter_count = pause_filter_count;
 		if (pause_filter_thresh)
 			control->pause_filter_thresh = pause_filter_thresh;
@@ -2693,7 +2693,7 @@ static int pause_interception(struct vcpu_svm *svm)
 	struct kvm_vcpu *vcpu = &svm->vcpu;
 	bool in_kernel = (svm_get_cpl(vcpu) == 0);
 
-	if (pause_filter_thresh)
+	if (!kvm_pause_in_guest(vcpu->kvm))
 		grow_ple_window(vcpu);
 
 	kvm_vcpu_on_spin(vcpu, in_kernel);
@@ -3344,7 +3344,7 @@ static fastpath_t svm_exit_handlers_fastpath(struct kvm_vcpu *vcpu)
 
 void __svm_vcpu_run(unsigned long vmcb_pa, unsigned long *regs);
 
-static fastpath_t svm_vcpu_run(struct kvm_vcpu *vcpu)
+static __no_kcsan fastpath_t svm_vcpu_run(struct kvm_vcpu *vcpu)
 {
 	fastpath_t exit_fastpath;
 	struct vcpu_svm *svm = to_svm(vcpu);
@@ -3780,7 +3780,7 @@ static void svm_handle_exit_irqoff(struct kvm_vcpu *vcpu)
 
 static void svm_sched_in(struct kvm_vcpu *vcpu, int cpu)
 {
-	if (pause_filter_thresh)
+	if (!kvm_pause_in_guest(vcpu->kvm))
 		shrink_ple_window(vcpu);
 }
 
@@ -3958,6 +3958,9 @@ static void svm_vm_destroy(struct kvm *kvm)
 
 static int svm_vm_init(struct kvm *kvm)
 {
+	if (!pause_filter_count || !pause_filter_thresh)
+		kvm->arch.pause_in_guest = true;
+
 	if (avic) {
 		int ret = avic_vm_init(kvm);
 		if (ret)
diff --git a/arch/x86/kvm/vmx/nested.c b/arch/x86/kvm/vmx/nested.c
index d1af20b050a8..11e4df560018 100644
--- a/arch/x86/kvm/vmx/nested.c
+++ b/arch/x86/kvm/vmx/nested.c
@@ -4109,7 +4109,7 @@ static void load_vmcs12_host_state(struct kvm_vcpu *vcpu,
 	 * CR0_GUEST_HOST_MASK is already set in the original vmcs01
 	 * (KVM doesn't change it);
 	 */
-	vcpu->arch.cr0_guest_owned_bits = X86_CR0_TS;
+	vcpu->arch.cr0_guest_owned_bits = KVM_POSSIBLE_CR0_GUEST_BITS;
 	vmx_set_cr0(vcpu, vmcs12->host_cr0);
 
 	/* Same as above - no reason to call set_cr4_guest_host_mask().  */
@@ -4259,7 +4259,7 @@ static void nested_vmx_restore_host_state(struct kvm_vcpu *vcpu)
 	 */
 	vmx_set_efer(vcpu, nested_vmx_get_vmcs01_guest_efer(vmx));
 
-	vcpu->arch.cr0_guest_owned_bits = X86_CR0_TS;
+	vcpu->arch.cr0_guest_owned_bits = KVM_POSSIBLE_CR0_GUEST_BITS;
 	vmx_set_cr0(vcpu, vmcs_readl(CR0_READ_SHADOW));
 
 	vcpu->arch.cr4_guest_owned_bits = ~vmcs_readl(CR4_GUEST_HOST_MASK);
@@ -6079,6 +6079,9 @@ static int vmx_set_nested_state(struct kvm_vcpu *vcpu,
 	    ~(KVM_STATE_NESTED_SMM_GUEST_MODE | KVM_STATE_NESTED_SMM_VMXON))
 		return -EINVAL;
 
+	if (kvm_state->hdr.vmx.flags & ~KVM_STATE_VMX_PREEMPTION_TIMER_DEADLINE)
+		return -EINVAL;
+
 	/*
 	 * SMM temporarily disables VMX, so we cannot be in guest mode,
 	 * nor can VMLAUNCH/VMRESUME be pending.  Outside SMM, SMM flags
@@ -6108,9 +6111,16 @@ static int vmx_set_nested_state(struct kvm_vcpu *vcpu,
 	if (ret)
 		return ret;
 
-	/* Empty 'VMXON' state is permitted */
-	if (kvm_state->size < sizeof(*kvm_state) + sizeof(*vmcs12))
-		return 0;
+	/* Empty 'VMXON' state is permitted if no VMCS loaded */
+	if (kvm_state->size < sizeof(*kvm_state) + sizeof(*vmcs12)) {
+		/* See vmx_has_valid_vmcs12.  */
+		if ((kvm_state->flags & KVM_STATE_NESTED_GUEST_MODE) ||
+		    (kvm_state->flags & KVM_STATE_NESTED_EVMCS) ||
+		    (kvm_state->hdr.vmx.vmcs12_pa != -1ull))
+			return -EINVAL;
+		else
+			return 0;
+	}
 
 	if (kvm_state->hdr.vmx.vmcs12_pa != -1ull) {
 		if (kvm_state->hdr.vmx.vmcs12_pa == kvm_state->hdr.vmx.vmxon_pa ||
@@ -6176,6 +6186,7 @@ static int vmx_set_nested_state(struct kvm_vcpu *vcpu,
 			goto error_guest_mode;
 	}
 
+	vmx->nested.has_preemption_timer_deadline = false;
 	if (kvm_state->hdr.vmx.flags & KVM_STATE_VMX_PREEMPTION_TIMER_DEADLINE) {
 		vmx->nested.has_preemption_timer_deadline = true;
 		vmx->nested.preemption_timer_deadline =
diff --git a/arch/x86/kvm/vmx/nested.h b/arch/x86/kvm/vmx/nested.h
index 758bccc26cf9..197148d76b8f 100644
--- a/arch/x86/kvm/vmx/nested.h
+++ b/arch/x86/kvm/vmx/nested.h
@@ -47,6 +47,11 @@ static inline struct vmcs12 *get_shadow_vmcs12(struct kvm_vcpu *vcpu)
 	return to_vmx(vcpu)->nested.cached_shadow_vmcs12;
 }
 
+/*
+ * Note: the same condition is checked against the state provided by userspace
+ * in vmx_set_nested_state; if it is satisfied, the nested state must include
+ * the VMCS12.
+ */
 static inline int vmx_has_valid_vmcs12(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
diff --git a/arch/x86/kvm/vmx/vmcs.h b/arch/x86/kvm/vmx/vmcs.h
index 5c0ff80b85c0..7a3675fddec2 100644
--- a/arch/x86/kvm/vmx/vmcs.h
+++ b/arch/x86/kvm/vmx/vmcs.h
@@ -72,11 +72,24 @@ struct loaded_vmcs {
 	struct vmcs_controls_shadow controls_shadow;
 };
 
+static inline bool is_intr_type(u32 intr_info, u32 type)
+{
+	const u32 mask = INTR_INFO_VALID_MASK | INTR_INFO_INTR_TYPE_MASK;
+
+	return (intr_info & mask) == (INTR_INFO_VALID_MASK | type);
+}
+
+static inline bool is_intr_type_n(u32 intr_info, u32 type, u8 vector)
+{
+	const u32 mask = INTR_INFO_VALID_MASK | INTR_INFO_INTR_TYPE_MASK |
+			 INTR_INFO_VECTOR_MASK;
+
+	return (intr_info & mask) == (INTR_INFO_VALID_MASK | type | vector);
+}
+
 static inline bool is_exception_n(u32 intr_info, u8 vector)
 {
-	return (intr_info & (INTR_INFO_INTR_TYPE_MASK | INTR_INFO_VECTOR_MASK |
-			     INTR_INFO_VALID_MASK)) ==
-		(INTR_TYPE_HARD_EXCEPTION | vector | INTR_INFO_VALID_MASK);
+	return is_intr_type_n(intr_info, INTR_TYPE_HARD_EXCEPTION, vector);
 }
 
 static inline bool is_debug(u32 intr_info)
@@ -106,28 +119,23 @@ static inline bool is_gp_fault(u32 intr_info)
 
 static inline bool is_machine_check(u32 intr_info)
 {
-	return (intr_info & (INTR_INFO_INTR_TYPE_MASK | INTR_INFO_VECTOR_MASK |
-			     INTR_INFO_VALID_MASK)) ==
-		(INTR_TYPE_HARD_EXCEPTION | MC_VECTOR | INTR_INFO_VALID_MASK);
+	return is_exception_n(intr_info, MC_VECTOR);
 }
 
 /* Undocumented: icebp/int1 */
 static inline bool is_icebp(u32 intr_info)
 {
-	return (intr_info & (INTR_INFO_INTR_TYPE_MASK | INTR_INFO_VALID_MASK))
-		== (INTR_TYPE_PRIV_SW_EXCEPTION | INTR_INFO_VALID_MASK);
+	return is_intr_type(intr_info, INTR_TYPE_PRIV_SW_EXCEPTION);
 }
 
 static inline bool is_nmi(u32 intr_info)
 {
-	return (intr_info & (INTR_INFO_INTR_TYPE_MASK | INTR_INFO_VALID_MASK))
-		== (INTR_TYPE_NMI_INTR | INTR_INFO_VALID_MASK);
+	return is_intr_type(intr_info, INTR_TYPE_NMI_INTR);
 }
 
 static inline bool is_external_intr(u32 intr_info)
 {
-	return (intr_info & (INTR_INFO_VALID_MASK | INTR_INFO_INTR_TYPE_MASK))
-		== (INTR_INFO_VALID_MASK | INTR_TYPE_EXT_INTR);
+	return is_intr_type(intr_info, INTR_TYPE_EXT_INTR);
 }
 
 enum vmcs_field_width {
diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
index 36c771728c8c..559634b59d2a 100644
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -27,6 +27,7 @@
 #include <linux/slab.h>
 #include <linux/tboot.h>
 #include <linux/trace_events.h>
+#include <linux/entry-kvm.h>
 
 #include <asm/apic.h>
 #include <asm/asm.h>
@@ -133,9 +134,6 @@ module_param_named(preemption_timer, enable_preemption_timer, bool, S_IRUGO);
 #define KVM_VM_CR0_ALWAYS_ON				\
 	(KVM_VM_CR0_ALWAYS_ON_UNRESTRICTED_GUEST | 	\
 	 X86_CR0_WP | X86_CR0_PG | X86_CR0_PE)
-#define KVM_CR4_GUEST_OWNED_BITS				      \
-	(X86_CR4_PVI | X86_CR4_DE | X86_CR4_PCE | X86_CR4_OSFXSR      \
-	 | X86_CR4_OSXMMEXCPT | X86_CR4_LA57 | X86_CR4_TSD)
 
 #define KVM_VM_CR4_ALWAYS_ON_UNRESTRICTED_GUEST X86_CR4_VMXE
 #define KVM_PMODE_VM_CR4_ALWAYS_ON (X86_CR4_PAE | X86_CR4_VMXE)
@@ -1172,7 +1170,7 @@ void vmx_prepare_switch_to_guest(struct kvm_vcpu *vcpu)
 
 	gs_base = cpu_kernelmode_gs_base(cpu);
 	if (likely(is_64bit_mm(current->mm))) {
-		save_fsgs_for_kvm();
+		current_save_fsgs();
 		fs_sel = current->thread.fsindex;
 		gs_sel = current->thread.gsindex;
 		fs_base = current->thread.fsbase;
@@ -4034,9 +4032,9 @@ void vmx_set_constant_host_state(struct vcpu_vmx *vmx)
 
 void set_cr4_guest_host_mask(struct vcpu_vmx *vmx)
 {
-	vmx->vcpu.arch.cr4_guest_owned_bits = KVM_CR4_GUEST_OWNED_BITS;
-	if (enable_ept)
-		vmx->vcpu.arch.cr4_guest_owned_bits |= X86_CR4_PGE;
+	vmx->vcpu.arch.cr4_guest_owned_bits = KVM_POSSIBLE_CR4_GUEST_BITS;
+	if (!enable_ept)
+		vmx->vcpu.arch.cr4_guest_owned_bits &= ~X86_CR4_PGE;
 	if (is_guest_mode(&vmx->vcpu))
 		vmx->vcpu.arch.cr4_guest_owned_bits &=
 			~get_vmcs12(&vmx->vcpu)->cr4_guest_host_mask;
@@ -4333,8 +4331,8 @@ static void init_vmcs(struct vcpu_vmx *vmx)
 	/* 22.2.1, 20.8.1 */
 	vm_entry_controls_set(vmx, vmx_vmentry_ctrl());
 
-	vmx->vcpu.arch.cr0_guest_owned_bits = X86_CR0_TS;
-	vmcs_writel(CR0_GUEST_HOST_MASK, ~X86_CR0_TS);
+	vmx->vcpu.arch.cr0_guest_owned_bits = KVM_POSSIBLE_CR0_GUEST_BITS;
+	vmcs_writel(CR0_GUEST_HOST_MASK, ~vmx->vcpu.arch.cr0_guest_owned_bits);
 
 	set_cr4_guest_host_mask(vmx);
 
@@ -5376,14 +5374,12 @@ static int handle_invalid_guest_state(struct kvm_vcpu *vcpu)
 		}
 
 		/*
-		 * Note, return 1 and not 0, vcpu_run() is responsible for
-		 * morphing the pending signal into the proper return code.
+		 * Note, return 1 and not 0, vcpu_run() will invoke
+		 * xfer_to_guest_mode() which will create a proper return
+		 * code.
 		 */
-		if (signal_pending(current))
+		if (__xfer_to_guest_mode_work_pending())
 			return 1;
-
-		if (need_resched())
-			schedule();
 	}
 
 	return 1;
@@ -6606,23 +6602,6 @@ static void atomic_switch_perf_msrs(struct vcpu_vmx *vmx)
 					msrs[i].host, false);
 }
 
-static void atomic_switch_umwait_control_msr(struct vcpu_vmx *vmx)
-{
-	u32 host_umwait_control;
-
-	if (!vmx_has_waitpkg(vmx))
-		return;
-
-	host_umwait_control = get_umwait_control_msr();
-
-	if (vmx->msr_ia32_umwait_control != host_umwait_control)
-		add_atomic_switch_msr(vmx, MSR_IA32_UMWAIT_CONTROL,
-			vmx->msr_ia32_umwait_control,
-			host_umwait_control, false);
-	else
-		clear_atomic_switch_msr(vmx, MSR_IA32_UMWAIT_CONTROL);
-}
-
 static void vmx_update_hv_timer(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
@@ -6728,9 +6707,7 @@ reenter_guest:
 
 	pt_guest_enter(vmx);
 
-	if (vcpu_to_pmu(vcpu)->version)
-		atomic_switch_perf_msrs(vmx);
-	atomic_switch_umwait_control_msr(vmx);
+	atomic_switch_perf_msrs(vmx);
 
 	if (enable_preemption_timer)
 		vmx_update_hv_timer(vcpu);
@@ -7501,11 +7478,11 @@ static void vmx_flush_log_dirty(struct kvm *kvm)
 	kvm_flush_pml_buffers(kvm);
 }
 
-static int vmx_write_pml_buffer(struct kvm_vcpu *vcpu)
+static int vmx_write_pml_buffer(struct kvm_vcpu *vcpu, gpa_t gpa)
 {
 	struct vmcs12 *vmcs12;
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
-	gpa_t gpa, dst;
+	gpa_t dst;
 
 	if (is_guest_mode(vcpu)) {
 		WARN_ON_ONCE(vmx->nested.pml_full);
@@ -7524,7 +7501,7 @@ static int vmx_write_pml_buffer(struct kvm_vcpu *vcpu)
 			return 1;
 		}
 
-		gpa = vmcs_read64(GUEST_PHYSICAL_ADDRESS) & ~0xFFFull;
+		gpa &= ~0xFFFull;
 		dst = vmcs12->pml_address + sizeof(u64) * vmcs12->guest_pml_index;
 
 		if (kvm_write_guest_page(vcpu->kvm, gpa_to_gfn(dst), &gpa,
diff --git a/arch/x86/kvm/vmx/vmx.h b/arch/x86/kvm/vmx/vmx.h
index 8a83b5edc820..639798e4a6ca 100644
--- a/arch/x86/kvm/vmx/vmx.h
+++ b/arch/x86/kvm/vmx/vmx.h
@@ -288,8 +288,6 @@ struct vcpu_vmx {
 
 	u64 current_tsc_ratio;
 
-	u32 host_pkru;
-
 	unsigned long host_debugctlmsr;
 
 	/*
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 00c88c2f34e4..21d5e7a7ffd0 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -56,6 +56,7 @@
 #include <linux/sched/stat.h>
 #include <linux/sched/isolation.h>
 #include <linux/mem_encrypt.h>
+#include <linux/entry-kvm.h>
 
 #include <trace/events/kvm.h>
 
@@ -975,6 +976,8 @@ int kvm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
 	if (is_long_mode(vcpu)) {
 		if (!(cr4 & X86_CR4_PAE))
 			return 1;
+		if ((cr4 ^ old_cr4) & X86_CR4_LA57)
+			return 1;
 	} else if (is_paging(vcpu) && (cr4 & X86_CR4_PAE)
 		   && ((cr4 ^ old_cr4) & pdptr_bits)
 		   && !load_pdptrs(vcpu, vcpu->arch.walk_mmu,
@@ -1585,7 +1588,7 @@ EXPORT_SYMBOL_GPL(kvm_emulate_wrmsr);
 bool kvm_vcpu_exit_request(struct kvm_vcpu *vcpu)
 {
 	return vcpu->mode == EXITING_GUEST_MODE || kvm_request_pending(vcpu) ||
-		need_resched() || signal_pending(current);
+		xfer_to_guest_mode_work_pending();
 }
 EXPORT_SYMBOL_GPL(kvm_vcpu_exit_request);
 
@@ -2693,6 +2696,9 @@ static int kvm_pv_enable_async_pf(struct kvm_vcpu *vcpu, u64 data)
 	if (data & 0x30)
 		return 1;
 
+	if (!lapic_in_kernel(vcpu))
+		return 1;
+
 	vcpu->arch.apf.msr_en_val = data;
 
 	if (!kvm_pv_async_pf_enabled(vcpu)) {
@@ -2856,7 +2862,7 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 		return kvm_mtrr_set_msr(vcpu, msr, data);
 	case MSR_IA32_APICBASE:
 		return kvm_set_apic_base(vcpu, msr_info);
-	case APIC_BASE_MSR ... APIC_BASE_MSR + 0x3ff:
+	case APIC_BASE_MSR ... APIC_BASE_MSR + 0xff:
 		return kvm_x2apic_msr_write(vcpu, msr, data);
 	case MSR_IA32_TSCDEADLINE:
 		kvm_set_lapic_tscdeadline_msr(vcpu, data);
@@ -3196,7 +3202,7 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 	case MSR_IA32_APICBASE:
 		msr_info->data = kvm_get_apic_base(vcpu);
 		break;
-	case APIC_BASE_MSR ... APIC_BASE_MSR + 0x3ff:
+	case APIC_BASE_MSR ... APIC_BASE_MSR + 0xff:
 		return kvm_x2apic_msr_read(vcpu, msr_info->index, &msr_info->data);
 	case MSR_IA32_TSCDEADLINE:
 		msr_info->data = kvm_get_lapic_tscdeadline_msr(vcpu);
@@ -4603,7 +4609,8 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
 		r = -EINVAL;
 		user_tsc_khz = (u32)arg;
 
-		if (user_tsc_khz >= kvm_max_guest_tsc_khz)
+		if (kvm_has_tsc_control &&
+		    user_tsc_khz >= kvm_max_guest_tsc_khz)
 			goto out;
 
 		if (user_tsc_khz == 0)
@@ -8675,15 +8682,11 @@ static int vcpu_run(struct kvm_vcpu *vcpu)
 			break;
 		}
 
-		if (signal_pending(current)) {
-			r = -EINTR;
-			vcpu->run->exit_reason = KVM_EXIT_INTR;
-			++vcpu->stat.signal_exits;
-			break;
-		}
-		if (need_resched()) {
+		if (__xfer_to_guest_mode_work_pending()) {
 			srcu_read_unlock(&kvm->srcu, vcpu->srcu_idx);
-			cond_resched();
+			r = xfer_to_guest_mode_handle_work(vcpu);
+			if (r)
+				return r;
 			vcpu->srcu_idx = srcu_read_lock(&kvm->srcu);
 		}
 	}
@@ -9926,7 +9929,7 @@ void kvm_arch_sync_events(struct kvm *kvm)
 int __x86_set_memory_region(struct kvm *kvm, int id, gpa_t gpa, u32 size)
 {
 	int i, r;
-	unsigned long hva, uninitialized_var(old_npages);
+	unsigned long hva, old_npages;
 	struct kvm_memslots *slots = kvm_memslots(kvm);
 	struct kvm_memory_slot *slot;
 
diff --git a/arch/x86/lib/memcpy_64.S b/arch/x86/lib/memcpy_64.S
index 56b243b14c3a..bbcc05bcefad 100644
--- a/arch/x86/lib/memcpy_64.S
+++ b/arch/x86/lib/memcpy_64.S
@@ -8,6 +8,8 @@
 #include <asm/alternative-asm.h>
 #include <asm/export.h>
 
+.pushsection .noinstr.text, "ax"
+
 /*
  * We build a jump to memcpy_orig by default which gets NOPped out on
  * the majority of x86 CPUs which set REP_GOOD. In addition, CPUs which
@@ -184,6 +186,8 @@ SYM_FUNC_START_LOCAL(memcpy_orig)
 	retq
 SYM_FUNC_END(memcpy_orig)
 
+.popsection
+
 #ifndef CONFIG_UML
 
 MCSAFE_TEST_CTL
diff --git a/arch/x86/lib/usercopy_64.c b/arch/x86/lib/usercopy_64.c
index fff28c6f73a2..b0dfac3d3df7 100644
--- a/arch/x86/lib/usercopy_64.c
+++ b/arch/x86/lib/usercopy_64.c
@@ -24,6 +24,7 @@ unsigned long __clear_user(void __user *addr, unsigned long size)
 	asm volatile(
 		"	testq  %[size8],%[size8]\n"
 		"	jz     4f\n"
+		"	.align 16\n"
 		"0:	movq $0,(%[dst])\n"
 		"	addq   $8,%[dst]\n"
 		"	decl %%ecx ; jnz   0b\n"
diff --git a/arch/x86/math-emu/wm_sqrt.S b/arch/x86/math-emu/wm_sqrt.S
index 3b2b58164ec1..40526dd85137 100644
--- a/arch/x86/math-emu/wm_sqrt.S
+++ b/arch/x86/math-emu/wm_sqrt.S
@@ -209,7 +209,7 @@ sqrt_stage_2_finish:
 
 #ifdef PARANOID
 /* It should be possible to get here only if the arg is ffff....ffff */
-	cmp	$0xffffffff,FPU_fsqrt_arg_1
+	cmpl	$0xffffffff,FPU_fsqrt_arg_1
 	jnz	sqrt_stage_2_error
 #endif /* PARANOID */
 
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index 66be9bd60307..5e5edd2ec893 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -99,7 +99,7 @@ check_prefetch_opcode(struct pt_regs *regs, unsigned char *instr,
 		return !instr_lo || (instr_lo>>1) == 1;
 	case 0x00:
 		/* Prefetch instruction is 0x0F0D or 0x0F18 */
-		if (probe_kernel_address(instr, opcode))
+		if (get_kernel_nofault(opcode, instr))
 			return 0;
 
 		*prefetch = (instr_lo == 0xF) &&
@@ -133,7 +133,7 @@ is_prefetch(struct pt_regs *regs, unsigned long error_code, unsigned long addr)
 	while (instr < max_instr) {
 		unsigned char opcode;
 
-		if (probe_kernel_address(instr, opcode))
+		if (get_kernel_nofault(opcode, instr))
 			break;
 
 		instr++;
@@ -301,7 +301,7 @@ static int bad_address(void *p)
 {
 	unsigned long dummy;
 
-	return probe_kernel_address((unsigned long *)p, dummy);
+	return get_kernel_nofault(dummy, (unsigned long *)p);
 }
 
 static void dump_pagetable(unsigned long address)
@@ -442,7 +442,7 @@ static void show_ldttss(const struct desc_ptr *gdt, const char *name, u16 index)
 		return;
 	}
 
-	if (probe_kernel_read(&desc, (void *)(gdt->address + offset),
+	if (copy_from_kernel_nofault(&desc, (void *)(gdt->address + offset),
 			      sizeof(struct ldttss_desc))) {
 		pr_alert("%s: 0x%hx -- GDT entry is not readable\n",
 			 name, index);
@@ -1377,7 +1377,7 @@ handle_page_fault(struct pt_regs *regs, unsigned long error_code,
 DEFINE_IDTENTRY_RAW_ERRORCODE(exc_page_fault)
 {
 	unsigned long address = read_cr2();
-	bool rcu_exit;
+	irqentry_state_t state;
 
 	prefetchw(&current->mm->mmap_lock);
 
@@ -1412,11 +1412,11 @@ DEFINE_IDTENTRY_RAW_ERRORCODE(exc_page_fault)
 	 * code reenabled RCU to avoid subsequent wreckage which helps
 	 * debugability.
 	 */
-	rcu_exit = idtentry_enter_cond_rcu(regs);
+	state = irqentry_enter(regs);
 
 	instrumentation_begin();
 	handle_page_fault(regs, error_code, address);
 	instrumentation_end();
 
-	idtentry_exit_cond_rcu(regs, rcu_exit);
+	irqentry_exit(regs, state);
 }
diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index 001dd7dc829f..c7a47603537f 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -25,6 +25,7 @@
 #include <asm/cpufeature.h>
 #include <asm/pti.h>
 #include <asm/text-patching.h>
+#include <asm/memtype.h>
 
 /*
  * We need to define the tracepoints somewhere, and tlb.c
@@ -912,8 +913,6 @@ void free_kernel_image_pages(const char *what, void *begin, void *end)
 		set_memory_np_noalias(begin_ul, len_pages);
 }
 
-void __weak mem_encrypt_free_decrypted_mem(void) { }
-
 void __ref free_initmem(void)
 {
 	e820__reallocate_tables();
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index bda909e3e37e..8b4afad84f4a 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -737,7 +737,7 @@ static void __init test_wp_bit(void)
 
 	__set_fixmap(FIX_WP_TEST, __pa_symbol(empty_zero_page), PAGE_KERNEL_RO);
 
-	if (probe_kernel_write((char *)fix_to_virt(FIX_WP_TEST), &z, 1)) {
+	if (copy_to_kernel_nofault((char *)fix_to_virt(FIX_WP_TEST), &z, 1)) {
 		clear_fixmap(FIX_WP_TEST);
 		printk(KERN_CONT "Ok.\n");
 		return;
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index dbae185511cd..e65b96f381a7 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -209,7 +209,7 @@ static void sync_global_pgds_l4(unsigned long start, unsigned long end)
  * When memory was added make sure all the processes MM have
  * suitable PGD entries in the local PGD level page.
  */
-void sync_global_pgds(unsigned long start, unsigned long end)
+static void sync_global_pgds(unsigned long start, unsigned long end)
 {
 	if (pgtable_l5_enabled())
 		sync_global_pgds_l5(start, end);
@@ -217,11 +217,6 @@ void sync_global_pgds(unsigned long start, unsigned long end)
 		sync_global_pgds_l4(start, end);
 }
 
-void arch_sync_kernel_mappings(unsigned long start, unsigned long end)
-{
-	sync_global_pgds(start, end);
-}
-
 /*
  * NOTE: This function is marked __ref because it calls __init function
  * (alloc_bootmem_pages). It's safe to do it ONLY when after_bootmem == 0.
@@ -1238,6 +1233,56 @@ static void __init register_page_bootmem_info(void)
 #endif
 }
 
+/*
+ * Pre-allocates page-table pages for the vmalloc area in the kernel page-table.
+ * Only the level which needs to be synchronized between all page-tables is
+ * allocated because the synchronization can be expensive.
+ */
+static void __init preallocate_vmalloc_pages(void)
+{
+	unsigned long addr;
+	const char *lvl;
+
+	for (addr = VMALLOC_START; addr <= VMALLOC_END; addr = ALIGN(addr + 1, PGDIR_SIZE)) {
+		pgd_t *pgd = pgd_offset_k(addr);
+		p4d_t *p4d;
+		pud_t *pud;
+
+		p4d = p4d_offset(pgd, addr);
+		if (p4d_none(*p4d)) {
+			/* Can only happen with 5-level paging */
+			p4d = p4d_alloc(&init_mm, pgd, addr);
+			if (!p4d) {
+				lvl = "p4d";
+				goto failed;
+			}
+		}
+
+		if (pgtable_l5_enabled())
+			continue;
+
+		pud = pud_offset(p4d, addr);
+		if (pud_none(*pud)) {
+			/* Ends up here only with 4-level paging */
+			pud = pud_alloc(&init_mm, p4d, addr);
+			if (!pud) {
+				lvl = "pud";
+				goto failed;
+			}
+		}
+	}
+
+	return;
+
+failed:
+
+	/*
+	 * The pages have to be there now or they will be missing in
+	 * process page-tables later.
+	 */
+	panic("Failed to pre-allocate %s pages for vmalloc area\n", lvl);
+}
+
 void __init mem_init(void)
 {
 	pci_iommu_alloc();
@@ -1261,6 +1306,8 @@ void __init mem_init(void)
 	if (get_gate_vma(&init_mm))
 		kclist_add(&kcore_vsyscall, (void *)VSYSCALL_ADDR, PAGE_SIZE, KCORE_USER);
 
+	preallocate_vmalloc_pages();
+
 	mem_init_print_info(NULL);
 }
 
diff --git a/arch/x86/mm/maccess.c b/arch/x86/mm/maccess.c
index e1d7d7477c22..92ec176a7293 100644
--- a/arch/x86/mm/maccess.c
+++ b/arch/x86/mm/maccess.c
@@ -9,7 +9,7 @@ static __always_inline u64 canonical_address(u64 vaddr, u8 vaddr_bits)
 	return ((s64)vaddr << (64 - vaddr_bits)) >> (64 - vaddr_bits);
 }
 
-bool probe_kernel_read_allowed(const void *unsafe_src, size_t size)
+bool copy_from_kernel_nofault_allowed(const void *unsafe_src, size_t size)
 {
 	unsigned long vaddr = (unsigned long)unsafe_src;
 
@@ -22,7 +22,7 @@ bool probe_kernel_read_allowed(const void *unsafe_src, size_t size)
 	       canonical_address(vaddr, boot_cpu_data.x86_virt_bits) == vaddr;
 }
 #else
-bool probe_kernel_read_allowed(const void *unsafe_src, size_t size)
+bool copy_from_kernel_nofault_allowed(const void *unsafe_src, size_t size)
 {
 	return (unsigned long)unsafe_src >= TASK_SIZE_MAX;
 }
diff --git a/arch/x86/mm/mem_encrypt.c b/arch/x86/mm/mem_encrypt.c
index 4a781cf99e92..9f1177edc2e7 100644
--- a/arch/x86/mm/mem_encrypt.c
+++ b/arch/x86/mm/mem_encrypt.c
@@ -376,7 +376,6 @@ bool force_dma_unencrypted(struct device *dev)
 	return false;
 }
 
-/* Architecture __weak replacement functions */
 void __init mem_encrypt_free_decrypted_mem(void)
 {
 	unsigned long vaddr, vaddr_end, npages;
@@ -401,6 +400,7 @@ void __init mem_encrypt_free_decrypted_mem(void)
 	free_init_pages("unused decrypted", vaddr, vaddr_end);
 }
 
+/* Architecture __weak replacement functions */
 void __init mem_encrypt_init(void)
 {
 	if (!sme_me_mask)
diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
index 8ee952038c80..b05f45e5e8e2 100644
--- a/arch/x86/mm/numa.c
+++ b/arch/x86/mm/numa.c
@@ -543,7 +543,6 @@ static void __init numa_clear_kernel_node_hotplug(void)
 
 static int __init numa_register_memblks(struct numa_meminfo *mi)
 {
-	unsigned long uninitialized_var(pfn_align);
 	int i, nid;
 
 	/* Account for nodes with cpus and no memory */
@@ -571,15 +570,16 @@ static int __init numa_register_memblks(struct numa_meminfo *mi)
 	 * If sections array is gonna be used for pfn -> nid mapping, check
 	 * whether its granularity is fine enough.
 	 */
-#ifdef NODE_NOT_IN_PAGE_FLAGS
-	pfn_align = node_map_pfn_alignment();
-	if (pfn_align && pfn_align < PAGES_PER_SECTION) {
-		printk(KERN_WARNING "Node alignment %LuMB < min %LuMB, rejecting NUMA config\n",
-		       PFN_PHYS(pfn_align) >> 20,
-		       PFN_PHYS(PAGES_PER_SECTION) >> 20);
-		return -EINVAL;
+	if (IS_ENABLED(NODE_NOT_IN_PAGE_FLAGS)) {
+		unsigned long pfn_align = node_map_pfn_alignment();
+
+		if (pfn_align && pfn_align < PAGES_PER_SECTION) {
+			pr_warn("Node alignment %LuMB < min %LuMB, rejecting NUMA config\n",
+				PFN_PHYS(pfn_align) >> 20,
+				PFN_PHYS(PAGES_PER_SECTION) >> 20);
+			return -EINVAL;
+		}
 	}
-#endif
 	if (!numa_meminfo_cover_memory(mi))
 		return -EINVAL;
 
diff --git a/arch/x86/mm/pat/set_memory.c b/arch/x86/mm/pat/set_memory.c
index 77e04304a2a7..d1b2a889f035 100644
--- a/arch/x86/mm/pat/set_memory.c
+++ b/arch/x86/mm/pat/set_memory.c
@@ -135,7 +135,7 @@ static inline void cpa_inc_2m_checked(void)
 
 static inline void cpa_inc_4k_install(void)
 {
-	cpa_4k_install++;
+	data_race(cpa_4k_install++);
 }
 
 static inline void cpa_inc_lp_sameprot(int level)
diff --git a/arch/x86/pci/pcbios.c b/arch/x86/pci/pcbios.c
index 9c97d814125e..4f15280732ed 100644
--- a/arch/x86/pci/pcbios.c
+++ b/arch/x86/pci/pcbios.c
@@ -302,7 +302,7 @@ static const struct pci_raw_ops *__init pci_find_bios(void)
 	     check <= (union bios32 *) __va(0xffff0);
 	     ++check) {
 		long sig;
-		if (probe_kernel_address(&check->fields.signature, sig))
+		if (get_kernel_nofault(sig, &check->fields.signature))
 			continue;
 
 		if (check->fields.signature != BIOS32_SIGNATURE)
diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c
index e966115d105c..f6ea8f1a9d57 100644
--- a/arch/x86/platform/efi/efi.c
+++ b/arch/x86/platform/efi/efi.c
@@ -496,7 +496,7 @@ void __init efi_init(void)
 		efi_print_memmap();
 }
 
-#if defined(CONFIG_X86_32) || defined(CONFIG_X86_UV)
+#if defined(CONFIG_X86_32)
 
 void __init efi_set_executable(efi_memory_desc_t *md, bool executable)
 {
@@ -648,7 +648,7 @@ static inline void *efi_map_next_entry_reverse(void *entry)
  */
 static void *efi_map_next_entry(void *entry)
 {
-	if (!efi_have_uv1_memmap() && efi_enabled(EFI_64BIT)) {
+	if (efi_enabled(EFI_64BIT)) {
 		/*
 		 * Starting in UEFI v2.5 the EFI_PROPERTIES_TABLE
 		 * config table feature requires us to map all entries
@@ -777,11 +777,9 @@ static void __init kexec_enter_virtual_mode(void)
 
 	/*
 	 * We don't do virtual mode, since we don't do runtime services, on
-	 * non-native EFI. With the UV1 memmap, we don't do runtime services in
-	 * kexec kernel because in the initial boot something else might
-	 * have been mapped at these virtual addresses.
+	 * non-native EFI.
 	 */
-	if (efi_is_mixed() || efi_have_uv1_memmap()) {
+	if (efi_is_mixed()) {
 		efi_memmap_unmap();
 		clear_bit(EFI_RUNTIME_SERVICES, &efi.flags);
 		return;
@@ -832,12 +830,6 @@ static void __init kexec_enter_virtual_mode(void)
  * has the runtime attribute bit set in its memory descriptor into the
  * efi_pgd page table.
  *
- * The old method which used to update that memory descriptor with the
- * virtual address obtained from ioremap() is still supported when the
- * kernel is booted on SG1 UV1 hardware. Same old method enabled the
- * runtime services to be called without having to thunk back into
- * physical mode for every invocation.
- *
  * The new method does a pagetable switch in a preemption-safe manner
  * so that we're in a different address space when calling a runtime
  * function. For function arguments passing we do copy the PUDs of the
diff --git a/arch/x86/platform/efi/efi_64.c b/arch/x86/platform/efi/efi_64.c
index 8e364c4c6768..413583f904a6 100644
--- a/arch/x86/platform/efi/efi_64.c
+++ b/arch/x86/platform/efi/efi_64.c
@@ -74,9 +74,6 @@ int __init efi_alloc_page_tables(void)
 	pud_t *pud;
 	gfp_t gfp_mask;
 
-	if (efi_have_uv1_memmap())
-		return 0;
-
 	gfp_mask = GFP_KERNEL | __GFP_ZERO;
 	efi_pgd = (pgd_t *)__get_free_pages(gfp_mask, PGD_ALLOCATION_ORDER);
 	if (!efi_pgd)
@@ -115,9 +112,6 @@ void efi_sync_low_kernel_mappings(void)
 	pud_t *pud_k, *pud_efi;
 	pgd_t *efi_pgd = efi_mm.pgd;
 
-	if (efi_have_uv1_memmap())
-		return;
-
 	/*
 	 * We can share all PGD entries apart from the one entry that
 	 * covers the EFI runtime mapping space.
@@ -206,9 +200,6 @@ int __init efi_setup_page_tables(unsigned long pa_memmap, unsigned num_pages)
 	unsigned npages;
 	pgd_t *pgd = efi_mm.pgd;
 
-	if (efi_have_uv1_memmap())
-		return 0;
-
 	/*
 	 * It can happen that the physical address of new_memmap lands in memory
 	 * which is not mapped in the EFI page table. Therefore we need to go
@@ -315,9 +306,6 @@ void __init efi_map_region(efi_memory_desc_t *md)
 	unsigned long size = md->num_pages << PAGE_SHIFT;
 	u64 pa = md->phys_addr;
 
-	if (efi_have_uv1_memmap())
-		return old_map_region(md);
-
 	/*
 	 * Make sure the 1:1 mappings are present as a catch-all for b0rked
 	 * firmware which doesn't update all internal pointers after switching
@@ -420,12 +408,6 @@ void __init efi_runtime_update_mappings(void)
 {
 	efi_memory_desc_t *md;
 
-	if (efi_have_uv1_memmap()) {
-		if (__supported_pte_mask & _PAGE_NX)
-			runtime_code_page_mkexec();
-		return;
-	}
-
 	/*
 	 * Use the EFI Memory Attribute Table for mapping permissions if it
 	 * exists, since it is intended to supersede EFI_PROPERTIES_TABLE.
@@ -474,10 +456,7 @@ void __init efi_runtime_update_mappings(void)
 void __init efi_dump_pagetable(void)
 {
 #ifdef CONFIG_EFI_PGT_DUMP
-	if (efi_have_uv1_memmap())
-		ptdump_walk_pgd_level(NULL, &init_mm);
-	else
-		ptdump_walk_pgd_level(NULL, &efi_mm);
+	ptdump_walk_pgd_level(NULL, &efi_mm);
 #endif
 }
 
@@ -849,21 +828,13 @@ efi_set_virtual_address_map(unsigned long memory_map_size,
 	const efi_system_table_t *systab = (efi_system_table_t *)systab_phys;
 	efi_status_t status;
 	unsigned long flags;
-	pgd_t *save_pgd = NULL;
 
 	if (efi_is_mixed())
 		return efi_thunk_set_virtual_address_map(memory_map_size,
 							 descriptor_size,
 							 descriptor_version,
 							 virtual_map);
-
-	if (efi_have_uv1_memmap()) {
-		save_pgd = efi_uv1_memmap_phys_prolog();
-		if (!save_pgd)
-			return EFI_ABORTED;
-	} else {
-		efi_switch_mm(&efi_mm);
-	}
+	efi_switch_mm(&efi_mm);
 
 	kernel_fpu_begin();
 
@@ -879,10 +850,7 @@ efi_set_virtual_address_map(unsigned long memory_map_size,
 	/* grab the virtually remapped EFI runtime services table pointer */
 	efi.runtime = READ_ONCE(systab->runtime);
 
-	if (save_pgd)
-		efi_uv1_memmap_phys_epilog(save_pgd);
-	else
-		efi_switch_mm(efi_scratch.prev_mm);
+	efi_switch_mm(efi_scratch.prev_mm);
 
 	return status;
 }
diff --git a/arch/x86/platform/efi/quirks.c b/arch/x86/platform/efi/quirks.c
index a5a469cdf5bf..5a40fe411ebd 100644
--- a/arch/x86/platform/efi/quirks.c
+++ b/arch/x86/platform/efi/quirks.c
@@ -381,14 +381,6 @@ static void __init efi_unmap_pages(efi_memory_desc_t *md)
 	u64 va = md->virt_addr;
 
 	/*
-	 * To Do: Remove this check after adding functionality to unmap EFI boot
-	 * services code/data regions from direct mapping area because the UV1
-	 * memory map maps EFI regions in swapper_pg_dir.
-	 */
-	if (efi_have_uv1_memmap())
-		return;
-
-	/*
 	 * EFI mixed mode has all RAM mapped to access arguments while making
 	 * EFI runtime calls, hence don't unmap EFI boot services code/data
 	 * regions.
@@ -558,16 +550,6 @@ out:
 	return ret;
 }
 
-static const struct dmi_system_id sgi_uv1_dmi[] __initconst = {
-	{ NULL, "SGI UV1",
-		{	DMI_MATCH(DMI_PRODUCT_NAME,	"Stoutland Platform"),
-			DMI_MATCH(DMI_PRODUCT_VERSION,	"1.0"),
-			DMI_MATCH(DMI_BIOS_VENDOR,	"SGI.COM"),
-		}
-	},
-	{ } /* NULL entry stops DMI scanning */
-};
-
 void __init efi_apply_memmap_quirks(void)
 {
 	/*
@@ -579,17 +561,6 @@ void __init efi_apply_memmap_quirks(void)
 		pr_info("Setup done, disabling due to 32/64-bit mismatch\n");
 		efi_memmap_unmap();
 	}
-
-	/* UV2+ BIOS has a fix for this issue.  UV1 still needs the quirk. */
-	if (dmi_check_system(sgi_uv1_dmi)) {
-		if (IS_ENABLED(CONFIG_X86_UV)) {
-			set_bit(EFI_UV1_MEMMAP, &efi.flags);
-		} else {
-			pr_warn("EFI runtime disabled, needs CONFIG_X86_UV=y on UV1\n");
-			clear_bit(EFI_RUNTIME_SERVICES, &efi.flags);
-			efi_memmap_unmap();
-		}
-	}
 }
 
 /*
@@ -723,8 +694,6 @@ void efi_recover_from_page_fault(unsigned long phys_addr)
 
 	/*
 	 * Make sure that an efi runtime service caused the page fault.
-	 * "efi_mm" cannot be used to check if the page fault had occurred
-	 * in the firmware context because the UV1 memmap doesn't use efi_pgd.
 	 */
 	if (efi_rts_work.efi_rts_id == EFI_NONE)
 		return;
diff --git a/arch/x86/platform/intel-mid/sfi.c b/arch/x86/platform/intel-mid/sfi.c
index b8f7f193f383..30bd5714a3d4 100644
--- a/arch/x86/platform/intel-mid/sfi.c
+++ b/arch/x86/platform/intel-mid/sfi.c
@@ -287,8 +287,8 @@ void intel_scu_devices_create(void)
 
 		adapter = i2c_get_adapter(i2c_bus[i]);
 		if (adapter) {
-			client = i2c_new_device(adapter, i2c_devs[i]);
-			if (!client)
+			client = i2c_new_client_device(adapter, i2c_devs[i]);
+			if (IS_ERR(client))
 				pr_err("can't create i2c device %s\n",
 					i2c_devs[i]->type);
 		} else
diff --git a/arch/x86/platform/uv/bios_uv.c b/arch/x86/platform/uv/bios_uv.c
index 4494589a288a..a6e5f2c1805d 100644
--- a/arch/x86/platform/uv/bios_uv.c
+++ b/arch/x86/platform/uv/bios_uv.c
@@ -30,17 +30,7 @@ static s64 __uv_bios_call(enum uv_bios_cmd which, u64 a1, u64 a2, u64 a3,
 		 */
 		return BIOS_STATUS_UNIMPLEMENTED;
 
-	/*
-	 * If EFI_UV1_MEMMAP is set, we need to fall back to using our old EFI
-	 * callback method, which uses efi_call() directly, with the kernel page tables:
-	 */
-	if (unlikely(efi_enabled(EFI_UV1_MEMMAP))) {
-		kernel_fpu_begin();
-		ret = efi_call((void *)__va(tab->function), (u64)which, a1, a2, a3, a4, a5);
-		kernel_fpu_end();
-	} else {
-		ret = efi_call_virt_pointer(tab, function, (u64)which, a1, a2, a3, a4, a5);
-	}
+	ret = efi_call_virt_pointer(tab, function, (u64)which, a1, a2, a3, a4, a5);
 
 	return ret;
 }
@@ -209,164 +199,3 @@ int uv_bios_init(void)
 	pr_info("UV: UVsystab: Revision:%x\n", uv_systab->revision);
 	return 0;
 }
-
-static void __init early_code_mapping_set_exec(int executable)
-{
-	efi_memory_desc_t *md;
-
-	if (!(__supported_pte_mask & _PAGE_NX))
-		return;
-
-	/* Make EFI service code area executable */
-	for_each_efi_memory_desc(md) {
-		if (md->type == EFI_RUNTIME_SERVICES_CODE ||
-		    md->type == EFI_BOOT_SERVICES_CODE)
-			efi_set_executable(md, executable);
-	}
-}
-
-void __init efi_uv1_memmap_phys_epilog(pgd_t *save_pgd)
-{
-	/*
-	 * After the lock is released, the original page table is restored.
-	 */
-	int pgd_idx, i;
-	int nr_pgds;
-	pgd_t *pgd;
-	p4d_t *p4d;
-	pud_t *pud;
-
-	nr_pgds = DIV_ROUND_UP((max_pfn << PAGE_SHIFT) , PGDIR_SIZE);
-
-	for (pgd_idx = 0; pgd_idx < nr_pgds; pgd_idx++) {
-		pgd = pgd_offset_k(pgd_idx * PGDIR_SIZE);
-		set_pgd(pgd_offset_k(pgd_idx * PGDIR_SIZE), save_pgd[pgd_idx]);
-
-		if (!pgd_present(*pgd))
-			continue;
-
-		for (i = 0; i < PTRS_PER_P4D; i++) {
-			p4d = p4d_offset(pgd,
-					 pgd_idx * PGDIR_SIZE + i * P4D_SIZE);
-
-			if (!p4d_present(*p4d))
-				continue;
-
-			pud = (pud_t *)p4d_page_vaddr(*p4d);
-			pud_free(&init_mm, pud);
-		}
-
-		p4d = (p4d_t *)pgd_page_vaddr(*pgd);
-		p4d_free(&init_mm, p4d);
-	}
-
-	kfree(save_pgd);
-
-	__flush_tlb_all();
-	early_code_mapping_set_exec(0);
-}
-
-pgd_t * __init efi_uv1_memmap_phys_prolog(void)
-{
-	unsigned long vaddr, addr_pgd, addr_p4d, addr_pud;
-	pgd_t *save_pgd, *pgd_k, *pgd_efi;
-	p4d_t *p4d, *p4d_k, *p4d_efi;
-	pud_t *pud;
-
-	int pgd;
-	int n_pgds, i, j;
-
-	early_code_mapping_set_exec(1);
-
-	n_pgds = DIV_ROUND_UP((max_pfn << PAGE_SHIFT), PGDIR_SIZE);
-	save_pgd = kmalloc_array(n_pgds, sizeof(*save_pgd), GFP_KERNEL);
-	if (!save_pgd)
-		return NULL;
-
-	/*
-	 * Build 1:1 identity mapping for UV1 memmap usage. Note that
-	 * PAGE_OFFSET is PGDIR_SIZE aligned when KASLR is disabled, while
-	 * it is PUD_SIZE ALIGNED with KASLR enabled. So for a given physical
-	 * address X, the pud_index(X) != pud_index(__va(X)), we can only copy
-	 * PUD entry of __va(X) to fill in pud entry of X to build 1:1 mapping.
-	 * This means here we can only reuse the PMD tables of the direct mapping.
-	 */
-	for (pgd = 0; pgd < n_pgds; pgd++) {
-		addr_pgd = (unsigned long)(pgd * PGDIR_SIZE);
-		vaddr = (unsigned long)__va(pgd * PGDIR_SIZE);
-		pgd_efi = pgd_offset_k(addr_pgd);
-		save_pgd[pgd] = *pgd_efi;
-
-		p4d = p4d_alloc(&init_mm, pgd_efi, addr_pgd);
-		if (!p4d) {
-			pr_err("Failed to allocate p4d table!\n");
-			goto out;
-		}
-
-		for (i = 0; i < PTRS_PER_P4D; i++) {
-			addr_p4d = addr_pgd + i * P4D_SIZE;
-			p4d_efi = p4d + p4d_index(addr_p4d);
-
-			pud = pud_alloc(&init_mm, p4d_efi, addr_p4d);
-			if (!pud) {
-				pr_err("Failed to allocate pud table!\n");
-				goto out;
-			}
-
-			for (j = 0; j < PTRS_PER_PUD; j++) {
-				addr_pud = addr_p4d + j * PUD_SIZE;
-
-				if (addr_pud > (max_pfn << PAGE_SHIFT))
-					break;
-
-				vaddr = (unsigned long)__va(addr_pud);
-
-				pgd_k = pgd_offset_k(vaddr);
-				p4d_k = p4d_offset(pgd_k, vaddr);
-				pud[j] = *pud_offset(p4d_k, vaddr);
-			}
-		}
-		pgd_offset_k(pgd * PGDIR_SIZE)->pgd &= ~_PAGE_NX;
-	}
-
-	__flush_tlb_all();
-	return save_pgd;
-out:
-	efi_uv1_memmap_phys_epilog(save_pgd);
-	return NULL;
-}
-
-void __iomem *__init efi_ioremap(unsigned long phys_addr, unsigned long size,
-				 u32 type, u64 attribute)
-{
-	unsigned long last_map_pfn;
-
-	if (type == EFI_MEMORY_MAPPED_IO)
-		return ioremap(phys_addr, size);
-
-	last_map_pfn = init_memory_mapping(phys_addr, phys_addr + size,
-					   PAGE_KERNEL);
-	if ((last_map_pfn << PAGE_SHIFT) < phys_addr + size) {
-		unsigned long top = last_map_pfn << PAGE_SHIFT;
-		efi_ioremap(top, size - (top - phys_addr), type, attribute);
-	}
-
-	if (!(attribute & EFI_MEMORY_WB))
-		efi_memory_uc((u64)(unsigned long)__va(phys_addr), size);
-
-	return (void __iomem *)__va(phys_addr);
-}
-
-static int __init arch_parse_efi_cmdline(char *str)
-{
-	if (!str) {
-		pr_warn("need at least one option\n");
-		return -EINVAL;
-	}
-
-	if (!efi_is_mixed() && parse_option_str(str, "old_map"))
-		set_bit(EFI_UV1_MEMMAP, &efi.flags);
-
-	return 0;
-}
-early_param("efi", arch_parse_efi_cmdline);
diff --git a/arch/x86/platform/uv/tlb_uv.c b/arch/x86/platform/uv/tlb_uv.c
index 0ac96ca304c7..62ea907668f8 100644
--- a/arch/x86/platform/uv/tlb_uv.c
+++ b/arch/x86/platform/uv/tlb_uv.c
@@ -23,18 +23,6 @@
 
 static struct bau_operations ops __ro_after_init;
 
-/* timeouts in nanoseconds (indexed by UVH_AGING_PRESCALE_SEL urgency7 30:28) */
-static const int timeout_base_ns[] = {
-		20,
-		160,
-		1280,
-		10240,
-		81920,
-		655360,
-		5242880,
-		167772160
-};
-
 static int timeout_us;
 static bool nobau = true;
 static int nobau_perm;
@@ -510,70 +498,6 @@ static inline void end_uvhub_quiesce(struct bau_control *hmaster)
 	atom_asr(-1, (struct atomic_short *)&hmaster->uvhub_quiesce);
 }
 
-static unsigned long uv1_read_status(unsigned long mmr_offset, int right_shift)
-{
-	unsigned long descriptor_status;
-
-	descriptor_status = uv_read_local_mmr(mmr_offset);
-	descriptor_status >>= right_shift;
-	descriptor_status &= UV_ACT_STATUS_MASK;
-	return descriptor_status;
-}
-
-/*
- * Wait for completion of a broadcast software ack message
- * return COMPLETE, RETRY(PLUGGED or TIMEOUT) or GIVEUP
- */
-static int uv1_wait_completion(struct bau_desc *bau_desc,
-				struct bau_control *bcp, long try)
-{
-	unsigned long descriptor_status;
-	cycles_t ttm;
-	u64 mmr_offset = bcp->status_mmr;
-	int right_shift = bcp->status_index;
-	struct ptc_stats *stat = bcp->statp;
-
-	descriptor_status = uv1_read_status(mmr_offset, right_shift);
-	/* spin on the status MMR, waiting for it to go idle */
-	while ((descriptor_status != DS_IDLE)) {
-		/*
-		 * Our software ack messages may be blocked because
-		 * there are no swack resources available.  As long
-		 * as none of them has timed out hardware will NACK
-		 * our message and its state will stay IDLE.
-		 */
-		if (descriptor_status == DS_SOURCE_TIMEOUT) {
-			stat->s_stimeout++;
-			return FLUSH_GIVEUP;
-		} else if (descriptor_status == DS_DESTINATION_TIMEOUT) {
-			stat->s_dtimeout++;
-			ttm = get_cycles();
-
-			/*
-			 * Our retries may be blocked by all destination
-			 * swack resources being consumed, and a timeout
-			 * pending.  In that case hardware returns the
-			 * ERROR that looks like a destination timeout.
-			 */
-			if (cycles_2_us(ttm - bcp->send_message) < timeout_us) {
-				bcp->conseccompletes = 0;
-				return FLUSH_RETRY_PLUGGED;
-			}
-
-			bcp->conseccompletes = 0;
-			return FLUSH_RETRY_TIMEOUT;
-		} else {
-			/*
-			 * descriptor_status is still BUSY
-			 */
-			cpu_relax();
-		}
-		descriptor_status = uv1_read_status(mmr_offset, right_shift);
-	}
-	bcp->conseccompletes++;
-	return FLUSH_COMPLETE;
-}
-
 /*
  * UV2 could have an extra bit of status in the ACTIVATION_STATUS_2 register.
  * But not currently used.
@@ -853,24 +777,6 @@ static void record_send_stats(cycles_t time1, cycles_t time2,
 }
 
 /*
- * Because of a uv1 hardware bug only a limited number of concurrent
- * requests can be made.
- */
-static void uv1_throttle(struct bau_control *hmaster, struct ptc_stats *stat)
-{
-	spinlock_t *lock = &hmaster->uvhub_lock;
-	atomic_t *v;
-
-	v = &hmaster->active_descriptor_count;
-	if (!atomic_inc_unless_ge(lock, v, hmaster->max_concurr)) {
-		stat->s_throttles++;
-		do {
-			cpu_relax();
-		} while (!atomic_inc_unless_ge(lock, v, hmaster->max_concurr));
-	}
-}
-
-/*
  * Handle the completion status of a message send.
  */
 static void handle_cmplt(int completion_status, struct bau_desc *bau_desc,
@@ -899,50 +805,30 @@ static int uv_flush_send_and_wait(struct cpumask *flush_mask,
 {
 	int seq_number = 0;
 	int completion_stat = 0;
-	int uv1 = 0;
 	long try = 0;
 	unsigned long index;
 	cycles_t time1;
 	cycles_t time2;
 	struct ptc_stats *stat = bcp->statp;
 	struct bau_control *hmaster = bcp->uvhub_master;
-	struct uv1_bau_msg_header *uv1_hdr = NULL;
 	struct uv2_3_bau_msg_header *uv2_3_hdr = NULL;
 
-	if (bcp->uvhub_version == UV_BAU_V1) {
-		uv1 = 1;
-		uv1_throttle(hmaster, stat);
-	}
-
 	while (hmaster->uvhub_quiesce)
 		cpu_relax();
 
 	time1 = get_cycles();
-	if (uv1)
-		uv1_hdr = &bau_desc->header.uv1_hdr;
-	else
-		/* uv2 and uv3 */
-		uv2_3_hdr = &bau_desc->header.uv2_3_hdr;
+	uv2_3_hdr = &bau_desc->header.uv2_3_hdr;
 
 	do {
 		if (try == 0) {
-			if (uv1)
-				uv1_hdr->msg_type = MSG_REGULAR;
-			else
-				uv2_3_hdr->msg_type = MSG_REGULAR;
+			uv2_3_hdr->msg_type = MSG_REGULAR;
 			seq_number = bcp->message_number++;
 		} else {
-			if (uv1)
-				uv1_hdr->msg_type = MSG_RETRY;
-			else
-				uv2_3_hdr->msg_type = MSG_RETRY;
+			uv2_3_hdr->msg_type = MSG_RETRY;
 			stat->s_retry_messages++;
 		}
 
-		if (uv1)
-			uv1_hdr->sequence = seq_number;
-		else
-			uv2_3_hdr->sequence = seq_number;
+		uv2_3_hdr->sequence = seq_number;
 		index = (1UL << AS_PUSH_SHIFT) | bcp->uvhub_cpu;
 		bcp->send_message = get_cycles();
 
@@ -1162,11 +1048,10 @@ const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask,
 		address = TLB_FLUSH_ALL;
 
 	switch (bcp->uvhub_version) {
-	case UV_BAU_V1:
 	case UV_BAU_V2:
 	case UV_BAU_V3:
-		bau_desc->payload.uv1_2_3.address = address;
-		bau_desc->payload.uv1_2_3.sending_cpu = cpu;
+		bau_desc->payload.uv2_3.address = address;
+		bau_desc->payload.uv2_3.sending_cpu = cpu;
 		break;
 	case UV_BAU_V4:
 		bau_desc->payload.uv4.address = address;
@@ -1300,7 +1185,7 @@ DEFINE_IDTENTRY_SYSVEC(sysvec_uv_bau_message)
 		if (bcp->uvhub_version == UV_BAU_V2)
 			process_uv2_message(&msgdesc, bcp);
 		else
-			/* no error workaround for uv1 or uv3 */
+			/* no error workaround for uv3 */
 			bau_process_message(&msgdesc, bcp, 1);
 
 		msg++;
@@ -1350,12 +1235,7 @@ static void __init enable_timeouts(void)
 		mmr_image &= ~((unsigned long)0xf << SOFTACK_PSHIFT);
 		mmr_image |= (SOFTACK_TIMEOUT_PERIOD << SOFTACK_PSHIFT);
 		write_mmr_misc_control(pnode, mmr_image);
-		/*
-		 * UV1:
-		 * Subsequent reversals of the timebase bit (3) cause an
-		 * immediate timeout of one or all INTD resources as
-		 * indicated in bits 2:0 (7 causes all of them to timeout).
-		 */
+
 		mmr_image |= (1L << SOFTACK_MSHIFT);
 		if (is_uv2_hub()) {
 			/* do not touch the legacy mode bit */
@@ -1711,14 +1591,12 @@ static void activation_descriptor_init(int node, int pnode, int base_pnode)
 {
 	int i;
 	int cpu;
-	int uv1 = 0;
 	unsigned long gpa;
 	unsigned long m;
 	unsigned long n;
 	size_t dsize;
 	struct bau_desc *bau_desc;
 	struct bau_desc *bd2;
-	struct uv1_bau_msg_header *uv1_hdr;
 	struct uv2_3_bau_msg_header *uv2_3_hdr;
 	struct bau_control *bcp;
 
@@ -1733,8 +1611,6 @@ static void activation_descriptor_init(int node, int pnode, int base_pnode)
 	gpa = uv_gpa(bau_desc);
 	n = uv_gpa_to_gnode(gpa);
 	m = ops.bau_gpa_to_offset(gpa);
-	if (is_uv1_hub())
-		uv1 = 1;
 
 	/* the 14-bit pnode */
 	write_mmr_descriptor_base(pnode,
@@ -1746,37 +1622,15 @@ static void activation_descriptor_init(int node, int pnode, int base_pnode)
 	 */
 	for (i = 0, bd2 = bau_desc; i < (ADP_SZ * ITEMS_PER_DESC); i++, bd2++) {
 		memset(bd2, 0, sizeof(struct bau_desc));
-		if (uv1) {
-			uv1_hdr = &bd2->header.uv1_hdr;
-			uv1_hdr->swack_flag = 1;
-			/*
-			 * The base_dest_nasid set in the message header
-			 * is the nasid of the first uvhub in the partition.
-			 * The bit map will indicate destination pnode numbers
-			 * relative to that base. They may not be consecutive
-			 * if nasid striding is being used.
-			 */
-			uv1_hdr->base_dest_nasid =
-			                          UV_PNODE_TO_NASID(base_pnode);
-			uv1_hdr->dest_subnodeid  = UV_LB_SUBNODEID;
-			uv1_hdr->command         = UV_NET_ENDPOINT_INTD;
-			uv1_hdr->int_both        = 1;
-			/*
-			 * all others need to be set to zero:
-			 *   fairness chaining multilevel count replied_to
-			 */
-		} else {
-			/*
-			 * BIOS uses legacy mode, but uv2 and uv3 hardware always
-			 * uses native mode for selective broadcasts.
-			 */
-			uv2_3_hdr = &bd2->header.uv2_3_hdr;
-			uv2_3_hdr->swack_flag      = 1;
-			uv2_3_hdr->base_dest_nasid =
-			                          UV_PNODE_TO_NASID(base_pnode);
-			uv2_3_hdr->dest_subnodeid  = UV_LB_SUBNODEID;
-			uv2_3_hdr->command         = UV_NET_ENDPOINT_INTD;
-		}
+		/*
+		 * BIOS uses legacy mode, but uv2 and uv3 hardware always
+		 * uses native mode for selective broadcasts.
+		 */
+		uv2_3_hdr = &bd2->header.uv2_3_hdr;
+		uv2_3_hdr->swack_flag      = 1;
+		uv2_3_hdr->base_dest_nasid = UV_PNODE_TO_NASID(base_pnode);
+		uv2_3_hdr->dest_subnodeid  = UV_LB_SUBNODEID;
+		uv2_3_hdr->command         = UV_NET_ENDPOINT_INTD;
 	}
 	for_each_present_cpu(cpu) {
 		if (pnode != uv_blade_to_pnode(uv_cpu_to_blade_id(cpu)))
@@ -1861,7 +1715,7 @@ static void __init init_uvhub(int uvhub, int vector, int base_pnode)
 	 * The below initialization can't be in firmware because the
 	 * messaging IRQ will be determined by the OS.
 	 */
-	apicid = uvhub_to_first_apicid(uvhub) | uv_apicid_hibits;
+	apicid = uvhub_to_first_apicid(uvhub);
 	write_mmr_data_config(pnode, ((apicid << 32) | vector));
 }
 
@@ -1874,33 +1728,20 @@ static int calculate_destination_timeout(void)
 {
 	unsigned long mmr_image;
 	int mult1;
-	int mult2;
-	int index;
 	int base;
 	int ret;
-	unsigned long ts_ns;
-
-	if (is_uv1_hub()) {
-		mult1 = SOFTACK_TIMEOUT_PERIOD & BAU_MISC_CONTROL_MULT_MASK;
-		mmr_image = uv_read_local_mmr(UVH_AGING_PRESCALE_SEL);
-		index = (mmr_image >> BAU_URGENCY_7_SHIFT) & BAU_URGENCY_7_MASK;
-		mmr_image = uv_read_local_mmr(UVH_TRANSACTION_TIMEOUT);
-		mult2 = (mmr_image >> BAU_TRANS_SHIFT) & BAU_TRANS_MASK;
-		ts_ns = timeout_base_ns[index];
-		ts_ns *= (mult1 * mult2);
-		ret = ts_ns / 1000;
-	} else {
-		/* same destination timeout for uv2 and uv3 */
-		/* 4 bits  0/1 for 10/80us base, 3 bits of multiplier */
-		mmr_image = uv_read_local_mmr(UVH_LB_BAU_MISC_CONTROL);
-		mmr_image = (mmr_image & UV_SA_MASK) >> UV_SA_SHFT;
-		if (mmr_image & (1L << UV2_ACK_UNITS_SHFT))
-			base = 80;
-		else
-			base = 10;
-		mult1 = mmr_image & UV2_ACK_MASK;
-		ret = mult1 * base;
-	}
+
+	/* same destination timeout for uv2 and uv3 */
+	/* 4 bits  0/1 for 10/80us base, 3 bits of multiplier */
+	mmr_image = uv_read_local_mmr(UVH_LB_BAU_MISC_CONTROL);
+	mmr_image = (mmr_image & UV_SA_MASK) >> UV_SA_SHFT;
+	if (mmr_image & (1L << UV2_ACK_UNITS_SHFT))
+		base = 80;
+	else
+		base = 10;
+	mult1 = mmr_image & UV2_ACK_MASK;
+	ret = mult1 * base;
+
 	return ret;
 }
 
@@ -2039,9 +1880,7 @@ static int scan_sock(struct socket_desc *sdp, struct uvhub_desc *bdp,
 		bcp->cpus_in_socket = sdp->num_cpus;
 		bcp->socket_master = *smasterp;
 		bcp->uvhub = bdp->uvhub;
-		if (is_uv1_hub())
-			bcp->uvhub_version = UV_BAU_V1;
-		else if (is_uv2_hub())
+		if (is_uv2_hub())
 			bcp->uvhub_version = UV_BAU_V2;
 		else if (is_uv3_hub())
 			bcp->uvhub_version = UV_BAU_V3;
@@ -2123,7 +1962,7 @@ static int __init init_per_cpu(int nuvhubs, int base_part_pnode)
 	struct uvhub_desc *uvhub_descs;
 	unsigned char *uvhub_mask = NULL;
 
-	if (is_uv3_hub() || is_uv2_hub() || is_uv1_hub())
+	if (is_uv3_hub() || is_uv2_hub())
 		timeout_us = calculate_destination_timeout();
 
 	uvhub_descs = kcalloc(nuvhubs, sizeof(struct uvhub_desc), GFP_KERNEL);
@@ -2151,17 +1990,6 @@ fail:
 	return 1;
 }
 
-static const struct bau_operations uv1_bau_ops __initconst = {
-	.bau_gpa_to_offset       = uv_gpa_to_offset,
-	.read_l_sw_ack           = read_mmr_sw_ack,
-	.read_g_sw_ack           = read_gmmr_sw_ack,
-	.write_l_sw_ack          = write_mmr_sw_ack,
-	.write_g_sw_ack          = write_gmmr_sw_ack,
-	.write_payload_first     = write_mmr_payload_first,
-	.write_payload_last      = write_mmr_payload_last,
-	.wait_completion	 = uv1_wait_completion,
-};
-
 static const struct bau_operations uv2_3_bau_ops __initconst = {
 	.bau_gpa_to_offset       = uv_gpa_to_offset,
 	.read_l_sw_ack           = read_mmr_sw_ack,
@@ -2206,8 +2034,6 @@ static int __init uv_bau_init(void)
 		ops = uv2_3_bau_ops;
 	else if (is_uv2_hub())
 		ops = uv2_3_bau_ops;
-	else if (is_uv1_hub())
-		ops = uv1_bau_ops;
 
 	nuvhubs = uv_num_possible_blades();
 	if (nuvhubs < 2) {
@@ -2228,7 +2054,7 @@ static int __init uv_bau_init(void)
 	}
 
 	/* software timeouts are not supported on UV4 */
-	if (is_uv3_hub() || is_uv2_hub() || is_uv1_hub())
+	if (is_uv3_hub() || is_uv2_hub())
 		enable_timeouts();
 
 	if (init_per_cpu(nuvhubs, uv_base_pnode)) {
@@ -2251,8 +2077,7 @@ static int __init uv_bau_init(void)
 			val = 1L << 63;
 			write_gmmr_activation(pnode, val);
 			mmr = 1; /* should be 1 to broadcast to both sockets */
-			if (!is_uv1_hub())
-				write_mmr_data_broadcast(pnode, mmr);
+			write_mmr_data_broadcast(pnode, mmr);
 		}
 	}
 
diff --git a/arch/x86/platform/uv/uv_irq.c b/arch/x86/platform/uv/uv_irq.c
index fc13cbbb2dce..abb6075397f0 100644
--- a/arch/x86/platform/uv/uv_irq.c
+++ b/arch/x86/platform/uv/uv_irq.c
@@ -167,9 +167,10 @@ static struct irq_domain *uv_get_irq_domain(void)
 		goto out;
 
 	uv_domain = irq_domain_create_tree(fn, &uv_domain_ops, NULL);
-	irq_domain_free_fwnode(fn);
 	if (uv_domain)
 		uv_domain->parent = x86_vector_domain;
+	else
+		irq_domain_free_fwnode(fn);
 out:
 	mutex_unlock(&uv_lock);
 
diff --git a/arch/x86/platform/uv/uv_time.c b/arch/x86/platform/uv/uv_time.c
index 7af31b245636..f82a1337a608 100644
--- a/arch/x86/platform/uv/uv_time.c
+++ b/arch/x86/platform/uv/uv_time.c
@@ -74,7 +74,6 @@ static void uv_rtc_send_IPI(int cpu)
 
 	apicid = cpu_physical_id(cpu);
 	pnode = uv_apicid_to_pnode(apicid);
-	apicid |= uv_apicid_hibits;
 	val = (1UL << UVH_IPI_INT_SEND_SHFT) |
 	      (apicid << UVH_IPI_INT_APIC_ID_SHFT) |
 	      (X86_PLATFORM_IPI_VECTOR << UVH_IPI_INT_VECTOR_SHFT);
@@ -85,10 +84,7 @@ static void uv_rtc_send_IPI(int cpu)
 /* Check for an RTC interrupt pending */
 static int uv_intr_pending(int pnode)
 {
-	if (is_uv1_hub())
-		return uv_read_global_mmr64(pnode, UVH_EVENT_OCCURRED0) &
-			UV1H_EVENT_OCCURRED0_RTC1_MASK;
-	else if (is_uvx_hub())
+	if (is_uvx_hub())
 		return uv_read_global_mmr64(pnode, UVXH_EVENT_OCCURRED2) &
 			UVXH_EVENT_OCCURRED2_RTC_1_MASK;
 	return 0;
@@ -98,19 +94,15 @@ static int uv_intr_pending(int pnode)
 static int uv_setup_intr(int cpu, u64 expires)
 {
 	u64 val;
-	unsigned long apicid = cpu_physical_id(cpu) | uv_apicid_hibits;
+	unsigned long apicid = cpu_physical_id(cpu);
 	int pnode = uv_cpu_to_pnode(cpu);
 
 	uv_write_global_mmr64(pnode, UVH_RTC1_INT_CONFIG,
 		UVH_RTC1_INT_CONFIG_M_MASK);
 	uv_write_global_mmr64(pnode, UVH_INT_CMPB, -1L);
 
-	if (is_uv1_hub())
-		uv_write_global_mmr64(pnode, UVH_EVENT_OCCURRED0_ALIAS,
-				UV1H_EVENT_OCCURRED0_RTC1_MASK);
-	else
-		uv_write_global_mmr64(pnode, UVXH_EVENT_OCCURRED2_ALIAS,
-				UVXH_EVENT_OCCURRED2_RTC_1_MASK);
+	uv_write_global_mmr64(pnode, UVXH_EVENT_OCCURRED2_ALIAS,
+			      UVXH_EVENT_OCCURRED2_RTC_1_MASK);
 
 	val = (X86_PLATFORM_IPI_VECTOR << UVH_RTC1_INT_CONFIG_VECTOR_SHFT) |
 		((u64)apicid << UVH_RTC1_INT_CONFIG_APIC_ID_SHFT);
diff --git a/arch/x86/power/cpu.c b/arch/x86/power/cpu.c
index 7c65102debaf..db1378c6ff26 100644
--- a/arch/x86/power/cpu.c
+++ b/arch/x86/power/cpu.c
@@ -193,6 +193,8 @@ static void fix_processor_context(void)
  */
 static void notrace __restore_processor_state(struct saved_context *ctxt)
 {
+	struct cpuinfo_x86 *c;
+
 	if (ctxt->misc_enable_saved)
 		wrmsrl(MSR_IA32_MISC_ENABLE, ctxt->misc_enable);
 	/*
@@ -263,6 +265,10 @@ static void notrace __restore_processor_state(struct saved_context *ctxt)
 	mtrr_bp_restore();
 	perf_restore_debug_store();
 	msr_restore_context(ctxt);
+
+	c = &cpu_data(smp_processor_id());
+	if (cpu_has(c, X86_FEATURE_MSR_IA32_FEAT_CTL))
+		init_ia32_feat_ctl(c);
 }
 
 /* Needed by apm.c */
diff --git a/arch/x86/purgatory/Makefile b/arch/x86/purgatory/Makefile
index b04e6e72a592..088bd764e0b7 100644
--- a/arch/x86/purgatory/Makefile
+++ b/arch/x86/purgatory/Makefile
@@ -34,6 +34,7 @@ KCOV_INSTRUMENT := n
 PURGATORY_CFLAGS_REMOVE := -mcmodel=kernel
 PURGATORY_CFLAGS := -mcmodel=large -ffreestanding -fno-zero-initialized-in-bss
 PURGATORY_CFLAGS += $(DISABLE_STACKLEAK_PLUGIN) -DDISABLE_BRANCH_PROFILING
+PURGATORY_CFLAGS += $(call cc-option,-fno-stack-protector)
 
 # Default KBUILD_CFLAGS can have -pg option set when FTRACE is enabled. That
 # in turn leaves some undefined symbols like __fentry__ in purgatory and not
diff --git a/arch/x86/xen/enlighten_pv.c b/arch/x86/xen/enlighten_pv.c
index 33b309d65955..2aab43a13a8c 100644
--- a/arch/x86/xen/enlighten_pv.c
+++ b/arch/x86/xen/enlighten_pv.c
@@ -386,7 +386,7 @@ static void set_aliased_prot(void *v, pgprot_t prot)
 
 	preempt_disable();
 
-	probe_kernel_read(&dummy, v, 1);
+	copy_from_kernel_nofault(&dummy, v, 1);
 
 	if (HYPERVISOR_update_va_mapping((unsigned long)v, pte, 0))
 		BUG();
@@ -598,6 +598,26 @@ static void xen_write_ldt_entry(struct desc_struct *dt, int entrynum,
 }
 
 #ifdef CONFIG_X86_64
+void noist_exc_debug(struct pt_regs *regs);
+
+DEFINE_IDTENTRY_RAW(xenpv_exc_nmi)
+{
+	/* On Xen PV, NMI doesn't use IST.  The C part is the sane as native. */
+	exc_nmi(regs);
+}
+
+DEFINE_IDTENTRY_RAW(xenpv_exc_debug)
+{
+	/*
+	 * There's no IST on Xen PV, but we still need to dispatch
+	 * to the correct handler.
+	 */
+	if (user_mode(regs))
+		noist_exc_debug(regs);
+	else
+		exc_debug(regs);
+}
+
 struct trap_array_entry {
 	void (*orig)(void);
 	void (*xen)(void);
@@ -609,18 +629,18 @@ struct trap_array_entry {
 	.xen		= xen_asm_##func,		\
 	.ist_okay	= ist_ok }
 
-#define TRAP_ENTRY_REDIR(func, xenfunc, ist_ok) {	\
+#define TRAP_ENTRY_REDIR(func, ist_ok) {		\
 	.orig		= asm_##func,			\
-	.xen		= xen_asm_##xenfunc,		\
+	.xen		= xen_asm_xenpv_##func,		\
 	.ist_okay	= ist_ok }
 
 static struct trap_array_entry trap_array[] = {
-	TRAP_ENTRY_REDIR(exc_debug, exc_xendebug,	true  ),
+	TRAP_ENTRY_REDIR(exc_debug,			true  ),
 	TRAP_ENTRY(exc_double_fault,			true  ),
 #ifdef CONFIG_X86_MCE
 	TRAP_ENTRY(exc_machine_check,			true  ),
 #endif
-	TRAP_ENTRY_REDIR(exc_nmi, exc_xennmi,		true  ),
+	TRAP_ENTRY_REDIR(exc_nmi,			true  ),
 	TRAP_ENTRY(exc_int3,				false ),
 	TRAP_ENTRY(exc_overflow,			false ),
 #ifdef CONFIG_IA32_EMULATION
@@ -850,6 +870,17 @@ static void xen_load_sp0(unsigned long sp0)
 }
 
 #ifdef CONFIG_X86_IOPL_IOPERM
+static void xen_invalidate_io_bitmap(void)
+{
+	struct physdev_set_iobitmap iobitmap = {
+		.bitmap = NULL,
+		.nr_ports = 0,
+	};
+
+	native_tss_invalidate_io_bitmap();
+	HYPERVISOR_physdev_op(PHYSDEVOP_set_iobitmap, &iobitmap);
+}
+
 static void xen_update_io_bitmap(void)
 {
 	struct physdev_set_iobitmap iobitmap;
@@ -1079,6 +1110,7 @@ static const struct pv_cpu_ops xen_cpu_ops __initconst = {
 	.load_sp0 = xen_load_sp0,
 
 #ifdef CONFIG_X86_IOPL_IOPERM
+	.invalidate_io_bitmap = xen_invalidate_io_bitmap,
 	.update_io_bitmap = xen_update_io_bitmap,
 #endif
 	.io_delay = xen_io_delay,
diff --git a/arch/x86/xen/smp_pv.c b/arch/x86/xen/smp_pv.c
index 171aff1b11f2..9ea598dcc132 100644
--- a/arch/x86/xen/smp_pv.c
+++ b/arch/x86/xen/smp_pv.c
@@ -92,9 +92,7 @@ static void cpu_bringup(void)
 asmlinkage __visible void cpu_bringup_and_idle(void)
 {
 	cpu_bringup();
-	boot_init_stack_canary();
 	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
-	prevent_tail_call_optimization();
 }
 
 void xen_smp_intr_free_pv(unsigned int cpu)
diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c
index c8897aad13cd..91f5b330dcc6 100644
--- a/arch/x86/xen/time.c
+++ b/arch/x86/xen/time.c
@@ -39,6 +39,7 @@ static unsigned long xen_tsc_khz(void)
 	struct pvclock_vcpu_time_info *info =
 		&HYPERVISOR_shared_info->vcpu_info[0].time;
 
+	setup_force_cpu_cap(X86_FEATURE_TSC_KNOWN_FREQ);
 	return pvclock_tsc_khz(info);
 }
 
diff --git a/arch/x86/xen/xen-asm_64.S b/arch/x86/xen/xen-asm_64.S
index 5d252aaeade8..aab1d99b2b48 100644
--- a/arch/x86/xen/xen-asm_64.S
+++ b/arch/x86/xen/xen-asm_64.S
@@ -29,10 +29,9 @@ _ASM_NOKPROBE(xen_\name)
 .endm
 
 xen_pv_trap asm_exc_divide_error
-xen_pv_trap asm_exc_debug
-xen_pv_trap asm_exc_xendebug
+xen_pv_trap asm_xenpv_exc_debug
 xen_pv_trap asm_exc_int3
-xen_pv_trap asm_exc_xennmi
+xen_pv_trap asm_xenpv_exc_nmi
 xen_pv_trap asm_exc_overflow
 xen_pv_trap asm_exc_bounds
 xen_pv_trap asm_exc_invalid_op
@@ -161,10 +160,22 @@ SYM_FUNC_END(xen_syscall32_target)
 
 /* 32-bit compat sysenter target */
 SYM_FUNC_START(xen_sysenter_target)
-	mov 0*8(%rsp), %rcx
-	mov 1*8(%rsp), %r11
-	mov 5*8(%rsp), %rsp
-	jmp entry_SYSENTER_compat
+	/*
+	 * NB: Xen is polite and clears TF from EFLAGS for us.  This means
+	 * that we don't need to guard against single step exceptions here.
+	 */
+	popq %rcx
+	popq %r11
+
+	/*
+	 * Neither Xen nor the kernel really knows what the old SS and
+	 * CS were.  The kernel expects __USER32_DS and __USER32_CS, so
+	 * report those values even though Xen will guess its own values.
+	 */
+	movq $__USER32_DS, 4*8(%rsp)
+	movq $__USER32_CS, 1*8(%rsp)
+
+	jmp entry_SYSENTER_compat_after_hwframe
 SYM_FUNC_END(xen_sysenter_target)
 
 #else /* !CONFIG_IA32_EMULATION */
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index 3a9f1e80394a..b71ba910d92f 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -24,7 +24,6 @@ config XTENSA
 	select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL
 	select HAVE_ARCH_KASAN if MMU && !XIP_KERNEL
 	select HAVE_ARCH_TRACEHOOK
-	select HAVE_COPY_THREAD_TLS
 	select HAVE_DEBUG_KMEMLEAK
 	select HAVE_DMA_CONTIGUOUS
 	select HAVE_EXIT_THREAD
diff --git a/arch/xtensa/include/asm/atomic.h b/arch/xtensa/include/asm/atomic.h
index 3e7c6134ed32..744c2f463845 100644
--- a/arch/xtensa/include/asm/atomic.h
+++ b/arch/xtensa/include/asm/atomic.h
@@ -19,8 +19,6 @@
 #include <asm/cmpxchg.h>
 #include <asm/barrier.h>
 
-#define ATOMIC_INIT(i)	{ (i) }
-
 /*
  * This Xtensa implementation assumes that the right mechanism
  * for exclusion is for locking interrupts to level EXCM_LEVEL.
diff --git a/arch/xtensa/include/asm/checksum.h b/arch/xtensa/include/asm/checksum.h
index d8292cc9ebdf..243a5fe79d3c 100644
--- a/arch/xtensa/include/asm/checksum.h
+++ b/arch/xtensa/include/asm/checksum.h
@@ -57,7 +57,7 @@ static inline
 __wsum csum_and_copy_from_user(const void __user *src, void *dst,
 				   int len, __wsum sum, int *err_ptr)
 {
-	if (access_ok(dst, len))
+	if (access_ok(src, len))
 		return csum_partial_copy_generic((__force const void *)src, dst,
 					len, sum, err_ptr, NULL);
 	if (len)
diff --git a/arch/xtensa/kernel/perf_event.c b/arch/xtensa/kernel/perf_event.c
index 9bae79f70301..99fcd63ce597 100644
--- a/arch/xtensa/kernel/perf_event.c
+++ b/arch/xtensa/kernel/perf_event.c
@@ -362,9 +362,7 @@ irqreturn_t xtensa_pmu_irq_handler(int irq, void *dev_id)
 	struct xtensa_pmu_events *ev = this_cpu_ptr(&xtensa_pmu_events);
 	unsigned i;
 
-	for (i = find_first_bit(ev->used_mask, XCHAL_NUM_PERF_COUNTERS);
-	     i < XCHAL_NUM_PERF_COUNTERS;
-	     i = find_next_bit(ev->used_mask, XCHAL_NUM_PERF_COUNTERS, i + 1)) {
+	for_each_set_bit(i, ev->used_mask, XCHAL_NUM_PERF_COUNTERS) {
 		uint32_t v = get_er(XTENSA_PMU_PMSTAT(i));
 		struct perf_event *event = ev->event[i];
 		struct hw_perf_event *hwc = &event->hw;
diff --git a/arch/xtensa/kernel/process.c b/arch/xtensa/kernel/process.c
index b7fe6f443b42..397a7de56377 100644
--- a/arch/xtensa/kernel/process.c
+++ b/arch/xtensa/kernel/process.c
@@ -201,7 +201,7 @@ int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
  * involved.  Much simpler to just not copy those live frames across.
  */
 
-int copy_thread_tls(unsigned long clone_flags, unsigned long usp_thread_fn,
+int copy_thread(unsigned long clone_flags, unsigned long usp_thread_fn,
 		unsigned long thread_fn_arg, struct task_struct *p,
 		unsigned long tls)
 {
diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c
index d9204dc2656e..be2c78f71695 100644
--- a/arch/xtensa/kernel/setup.c
+++ b/arch/xtensa/kernel/setup.c
@@ -724,7 +724,8 @@ c_start(struct seq_file *f, loff_t *pos)
 static void *
 c_next(struct seq_file *f, void *v, loff_t *pos)
 {
-	return NULL;
+	++*pos;
+	return c_start(f, pos);
 }
 
 static void
diff --git a/arch/xtensa/kernel/syscalls/syscall.tbl b/arch/xtensa/kernel/syscalls/syscall.tbl
index 69d0d73876b3..d216ccba42f7 100644
--- a/arch/xtensa/kernel/syscalls/syscall.tbl
+++ b/arch/xtensa/kernel/syscalls/syscall.tbl
@@ -406,6 +406,7 @@
 433	common	fspick				sys_fspick
 434	common	pidfd_open			sys_pidfd_open
 435	common	clone3				sys_clone3
+436	common	close_range			sys_close_range
 437	common	openat2				sys_openat2
 438	common	pidfd_getfd			sys_pidfd_getfd
 439	common	faccessat2			sys_faccessat2
diff --git a/arch/xtensa/kernel/xtensa_ksyms.c b/arch/xtensa/kernel/xtensa_ksyms.c
index 4092555828b1..24cf6972eace 100644
--- a/arch/xtensa/kernel/xtensa_ksyms.c
+++ b/arch/xtensa/kernel/xtensa_ksyms.c
@@ -87,13 +87,13 @@ void __xtensa_libgcc_window_spill(void)
 }
 EXPORT_SYMBOL(__xtensa_libgcc_window_spill);
 
-unsigned long __sync_fetch_and_and_4(unsigned long *p, unsigned long v)
+unsigned int __sync_fetch_and_and_4(volatile void *p, unsigned int v)
 {
 	BUG();
 }
 EXPORT_SYMBOL(__sync_fetch_and_and_4);
 
-unsigned long __sync_fetch_and_or_4(unsigned long *p, unsigned long v)
+unsigned int __sync_fetch_and_or_4(volatile void *p, unsigned int v)
 {
 	BUG();
 }
diff --git a/arch/xtensa/platforms/iss/simdisk.c b/arch/xtensa/platforms/iss/simdisk.c
index 49322b66cda9..3447556d276d 100644
--- a/arch/xtensa/platforms/iss/simdisk.c
+++ b/arch/xtensa/platforms/iss/simdisk.c
@@ -101,9 +101,9 @@ static void simdisk_transfer(struct simdisk *dev, unsigned long sector,
 	spin_unlock(&dev->lock);
 }
 
-static blk_qc_t simdisk_make_request(struct request_queue *q, struct bio *bio)
+static blk_qc_t simdisk_submit_bio(struct bio *bio)
 {
-	struct simdisk *dev = q->queuedata;
+	struct simdisk *dev = bio->bi_disk->private_data;
 	struct bio_vec bvec;
 	struct bvec_iter iter;
 	sector_t sector = bio->bi_iter.bi_sector;
@@ -127,8 +127,6 @@ static int simdisk_open(struct block_device *bdev, fmode_t mode)
 	struct simdisk *dev = bdev->bd_disk->private_data;
 
 	spin_lock(&dev->lock);
-	if (!dev->users)
-		check_disk_change(bdev);
 	++dev->users;
 	spin_unlock(&dev->lock);
 	return 0;
@@ -144,6 +142,7 @@ static void simdisk_release(struct gendisk *disk, fmode_t mode)
 
 static const struct block_device_operations simdisk_ops = {
 	.owner		= THIS_MODULE,
+	.submit_bio	= simdisk_submit_bio,
 	.open		= simdisk_open,
 	.release	= simdisk_release,
 };
@@ -267,14 +266,12 @@ static int __init simdisk_setup(struct simdisk *dev, int which,
 	spin_lock_init(&dev->lock);
 	dev->users = 0;
 
-	dev->queue = blk_alloc_queue(simdisk_make_request, NUMA_NO_NODE);
+	dev->queue = blk_alloc_queue(NUMA_NO_NODE);
 	if (dev->queue == NULL) {
 		pr_err("blk_alloc_queue failed\n");
 		goto out_alloc_queue;
 	}
 
-	dev->queue->queuedata = dev;
-
 	dev->gd = alloc_disk(SIMDISK_MINORS);
 	if (dev->gd == NULL) {
 		pr_err("alloc_disk failed\n");