diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/arm/mach-ux500/board-mop500-pins.c | 200 |
1 files changed, 0 insertions, 200 deletions
diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c index 07ddb89a6dbe..c311d11d6c3d 100644 --- a/arch/arm/mach-ux500/board-mop500-pins.c +++ b/arch/arm/mach-ux500/board-mop500-pins.c @@ -27,7 +27,6 @@ static enum custom_pin_cfg_t pinsfor; #define BIAS(a,b) static unsigned long a[] = { b } BIAS(pd, PIN_PULL_DOWN); -BIAS(in_nopull, PIN_INPUT_NOPULL); BIAS(in_pu, PIN_INPUT_PULLUP); BIAS(in_pd, PIN_INPUT_PULLDOWN); BIAS(out_lo, PIN_OUTPUT_LOW); @@ -43,15 +42,6 @@ BIAS(gpio_in_pu_slpm_gpio_nopull, PIN_INPUT_PULLUP|PIN_GPIOMODE_ENABLED|PIN_SLPM BIAS(gpio_in_pd_slpm_gpio_nopull, PIN_INPUT_PULLDOWN|PIN_GPIOMODE_ENABLED|PIN_SLPM_GPIO|PIN_SLPM_INPUT_NOPULL); BIAS(gpio_out_hi, PIN_OUTPUT_HIGH|PIN_GPIOMODE_ENABLED); BIAS(gpio_out_lo, PIN_OUTPUT_LOW|PIN_GPIOMODE_ENABLED); -/* Sleep modes */ -BIAS(slpm_in_wkup_pdis, PIN_SLEEPMODE_ENABLED| - PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); -BIAS(slpm_out_lo_pdis, PIN_SLEEPMODE_ENABLED| - PIN_SLPM_OUTPUT_LOW|PIN_SLPM_WAKEUP_DISABLE|PIN_SLPM_PDIS_DISABLED); -BIAS(slpm_out_lo_wkup_pdis, PIN_SLEEPMODE_ENABLED| - PIN_SLPM_OUTPUT_LOW|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); -BIAS(slpm_in_pu_wkup_pdis_en, PIN_SLEEPMODE_ENABLED|PIN_SLPM_INPUT_PULLUP| - PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_ENABLED); /* We use these to define hog settings that are always done on boot */ #define DB8500_MUX_HOG(group,func) \ @@ -321,190 +311,6 @@ static struct pinctrl_map __initdata ab8505_pinmap[] = { AB8505_PIN_HOG("GPIO53_D15", in_pd), }; -/* Pin control settings */ -static struct pinctrl_map __initdata mop500_family_pinmap[] = { - /* STM APE pins states */ - DB8500_MUX_STATE("stmape_c_1", "stmape", - "stm", "ape_mipi34"), - DB8500_PIN_STATE("GPIO70_G5", in_nopull, - "stm", "ape_mipi34"), /* clk */ - DB8500_PIN_STATE("GPIO71_G4", in_nopull, - "stm", "ape_mipi34"), /* dat3 */ - DB8500_PIN_STATE("GPIO72_H4", in_nopull, - "stm", "ape_mipi34"), /* dat2 */ - DB8500_PIN_STATE("GPIO73_H3", in_nopull, - "stm", "ape_mipi34"), /* dat1 */ - DB8500_PIN_STATE("GPIO74_J3", in_nopull, - "stm", "ape_mipi34"), /* dat0 */ - - DB8500_PIN_STATE("GPIO70_G5", slpm_out_lo_pdis, - "stm", "ape_mipi34_sleep"), /* clk */ - DB8500_PIN_STATE("GPIO71_G4", slpm_out_lo_pdis, - "stm", "ape_mipi34_sleep"), /* dat3 */ - DB8500_PIN_STATE("GPIO72_H4", slpm_out_lo_pdis, - "stm", "ape_mipi34_sleep"), /* dat2 */ - DB8500_PIN_STATE("GPIO73_H3", slpm_out_lo_pdis, - "stm", "ape_mipi34_sleep"), /* dat1 */ - DB8500_PIN_STATE("GPIO74_J3", slpm_out_lo_pdis, - "stm", "ape_mipi34_sleep"), /* dat0 */ - - DB8500_MUX_STATE("stmape_oc1_1", "stmape", - "stm", "ape_microsd"), - DB8500_PIN_STATE("GPIO23_AA4", in_nopull, - "stm", "ape_microsd"), /* clk */ - DB8500_PIN_STATE("GPIO25_Y4", in_nopull, - "stm", "ape_microsd"), /* dat0 */ - DB8500_PIN_STATE("GPIO26_Y2", in_nopull, - "stm", "ape_microsd"), /* dat1 */ - DB8500_PIN_STATE("GPIO27_AA2", in_nopull, - "stm", "ape_microsd"), /* dat2 */ - DB8500_PIN_STATE("GPIO28_AA1", in_nopull, - "stm", "ape_microsd"), /* dat3 */ - - DB8500_PIN_STATE("GPIO23_AA4", slpm_out_lo_wkup_pdis, - "stm", "ape_microsd_sleep"), /* clk */ - DB8500_PIN_STATE("GPIO25_Y4", slpm_in_wkup_pdis, - "stm", "ape_microsd_sleep"), /* dat0 */ - DB8500_PIN_STATE("GPIO26_Y2", slpm_in_wkup_pdis, - "stm", "ape_microsd_sleep"), /* dat1 */ - DB8500_PIN_STATE("GPIO27_AA2", slpm_in_wkup_pdis, - "stm", "ape_microsd_sleep"), /* dat2 */ - DB8500_PIN_STATE("GPIO28_AA1", slpm_in_wkup_pdis, - "stm", "ape_microsd_sleep"), /* dat3 */ - - /* STM Modem pins states */ - DB8500_MUX_STATE("stmmod_oc3_2", "stmmod", - "stm", "mod_mipi34"), - DB8500_MUX_STATE("uartmodrx_oc3_1", "uartmod", - "stm", "mod_mipi34"), - DB8500_MUX_STATE("uartmodtx_oc3_1", "uartmod", - "stm", "mod_mipi34"), - DB8500_PIN_STATE("GPIO70_G5", in_nopull, - "stm", "mod_mipi34"), /* clk */ - DB8500_PIN_STATE("GPIO71_G4", in_nopull, - "stm", "mod_mipi34"), /* dat3 */ - DB8500_PIN_STATE("GPIO72_H4", in_nopull, - "stm", "mod_mipi34"), /* dat2 */ - DB8500_PIN_STATE("GPIO73_H3", in_nopull, - "stm", "mod_mipi34"), /* dat1 */ - DB8500_PIN_STATE("GPIO74_J3", in_nopull, - "stm", "mod_mipi34"), /* dat0 */ - DB8500_PIN_STATE("GPIO75_H2", in_pu, - "stm", "mod_mipi34"), /* uartmod rx */ - DB8500_PIN_STATE("GPIO76_J2", out_lo, - "stm", "mod_mipi34"), /* uartmod tx */ - - DB8500_PIN_STATE("GPIO70_G5", slpm_out_lo_pdis, - "stm", "mod_mipi34_sleep"), /* clk */ - DB8500_PIN_STATE("GPIO71_G4", slpm_out_lo_pdis, - "stm", "mod_mipi34_sleep"), /* dat3 */ - DB8500_PIN_STATE("GPIO72_H4", slpm_out_lo_pdis, - "stm", "mod_mipi34_sleep"), /* dat2 */ - DB8500_PIN_STATE("GPIO73_H3", slpm_out_lo_pdis, - "stm", "mod_mipi34_sleep"), /* dat1 */ - DB8500_PIN_STATE("GPIO74_J3", slpm_out_lo_pdis, - "stm", "mod_mipi34_sleep"), /* dat0 */ - DB8500_PIN_STATE("GPIO75_H2", slpm_in_wkup_pdis, - "stm", "mod_mipi34_sleep"), /* uartmod rx */ - DB8500_PIN_STATE("GPIO76_J2", slpm_out_lo_wkup_pdis, - "stm", "mod_mipi34_sleep"), /* uartmod tx */ - - DB8500_MUX_STATE("stmmod_b_1", "stmmod", - "stm", "mod_microsd"), - DB8500_MUX_STATE("uartmodrx_oc3_1", "uartmod", - "stm", "mod_microsd"), - DB8500_MUX_STATE("uartmodtx_oc3_1", "uartmod", - "stm", "mod_microsd"), - DB8500_PIN_STATE("GPIO23_AA4", in_nopull, - "stm", "mod_microsd"), /* clk */ - DB8500_PIN_STATE("GPIO25_Y4", in_nopull, - "stm", "mod_microsd"), /* dat0 */ - DB8500_PIN_STATE("GPIO26_Y2", in_nopull, - "stm", "mod_microsd"), /* dat1 */ - DB8500_PIN_STATE("GPIO27_AA2", in_nopull, - "stm", "mod_microsd"), /* dat2 */ - DB8500_PIN_STATE("GPIO28_AA1", in_nopull, - "stm", "mod_microsd"), /* dat3 */ - DB8500_PIN_STATE("GPIO75_H2", in_pu, - "stm", "mod_microsd"), /* uartmod rx */ - DB8500_PIN_STATE("GPIO76_J2", out_lo, - "stm", "mod_microsd"), /* uartmod tx */ - - DB8500_PIN_STATE("GPIO23_AA4", slpm_out_lo_wkup_pdis, - "stm", "mod_microsd_sleep"), /* clk */ - DB8500_PIN_STATE("GPIO25_Y4", slpm_in_wkup_pdis, - "stm", "mod_microsd_sleep"), /* dat0 */ - DB8500_PIN_STATE("GPIO26_Y2", slpm_in_wkup_pdis, - "stm", "mod_microsd_sleep"), /* dat1 */ - DB8500_PIN_STATE("GPIO27_AA2", slpm_in_wkup_pdis, - "stm", "mod_microsd_sleep"), /* dat2 */ - DB8500_PIN_STATE("GPIO28_AA1", slpm_in_wkup_pdis, - "stm", "mod_microsd_sleep"), /* dat3 */ - DB8500_PIN_STATE("GPIO75_H2", slpm_in_wkup_pdis, - "stm", "mod_microsd_sleep"), /* uartmod rx */ - DB8500_PIN_STATE("GPIO76_J2", slpm_out_lo_wkup_pdis, - "stm", "mod_microsd_sleep"), /* uartmod tx */ - - /* STM dual Modem/APE pins state */ - DB8500_MUX_STATE("stmmod_oc3_2", "stmmod", - "stm", "mod_mipi34_ape_mipi60"), - DB8500_MUX_STATE("stmape_c_2", "stmape", - "stm", "mod_mipi34_ape_mipi60"), - DB8500_MUX_STATE("uartmodrx_oc3_1", "uartmod", - "stm", "mod_mipi34_ape_mipi60"), - DB8500_MUX_STATE("uartmodtx_oc3_1", "uartmod", - "stm", "mod_mipi34_ape_mipi60"), - DB8500_PIN_STATE("GPIO70_G5", in_nopull, - "stm", "mod_mipi34_ape_mipi60"), /* clk */ - DB8500_PIN_STATE("GPIO71_G4", in_nopull, - "stm", "mod_mipi34_ape_mipi60"), /* dat3 */ - DB8500_PIN_STATE("GPIO72_H4", in_nopull, - "stm", "mod_mipi34_ape_mipi60"), /* dat2 */ - DB8500_PIN_STATE("GPIO73_H3", in_nopull, - "stm", "mod_mipi34_ape_mipi60"), /* dat1 */ - DB8500_PIN_STATE("GPIO74_J3", in_nopull, - "stm", "mod_mipi34_ape_mipi60"), /* dat0 */ - DB8500_PIN_STATE("GPIO75_H2", in_pu, - "stm", "mod_mipi34_ape_mipi60"), /* uartmod rx */ - DB8500_PIN_STATE("GPIO76_J2", out_lo, - "stm", "mod_mipi34_ape_mipi60"), /* uartmod tx */ - DB8500_PIN_STATE("GPIO155_C19", in_nopull, - "stm", "mod_mipi34_ape_mipi60"), /* clk */ - DB8500_PIN_STATE("GPIO156_C17", in_nopull, - "stm", "mod_mipi34_ape_mipi60"), /* dat3 */ - DB8500_PIN_STATE("GPIO157_A18", in_nopull, - "stm", "mod_mipi34_ape_mipi60"), /* dat2 */ - DB8500_PIN_STATE("GPIO158_C18", in_nopull, - "stm", "mod_mipi34_ape_mipi60"), /* dat1 */ - DB8500_PIN_STATE("GPIO159_B19", in_nopull, - "stm", "mod_mipi34_ape_mipi60"), /* dat0 */ - - DB8500_PIN_STATE("GPIO70_G5", slpm_out_lo_pdis, - "stm", "mod_mipi34_ape_mipi60_sleep"), /* clk */ - DB8500_PIN_STATE("GPIO71_G4", slpm_out_lo_pdis, - "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat3 */ - DB8500_PIN_STATE("GPIO72_H4", slpm_out_lo_pdis, - "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat2 */ - DB8500_PIN_STATE("GPIO73_H3", slpm_out_lo_pdis, - "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat1 */ - DB8500_PIN_STATE("GPIO74_J3", slpm_out_lo_pdis, - "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat0 */ - DB8500_PIN_STATE("GPIO75_H2", slpm_in_wkup_pdis, - "stm", "mod_mipi34_ape_mipi60_sleep"), /* uartmod rx */ - DB8500_PIN_STATE("GPIO76_J2", slpm_out_lo_wkup_pdis, - "stm", "mod_mipi34_ape_mipi60_sleep"), /* uartmod tx */ - DB8500_PIN_STATE("GPIO155_C19", slpm_in_wkup_pdis, - "stm", "mod_mipi34_ape_mipi60_sleep"), /* clk */ - DB8500_PIN_STATE("GPIO156_C17", slpm_in_wkup_pdis, - "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat3 */ - DB8500_PIN_STATE("GPIO157_A18", slpm_in_wkup_pdis, - "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat2 */ - DB8500_PIN_STATE("GPIO158_C18", slpm_in_wkup_pdis, - "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat1 */ - DB8500_PIN_STATE("GPIO159_B19", slpm_in_wkup_pdis, - "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat0 */ -}; - /* * These are specifically for the MOP500 and HREFP (pre-v60) version of the * board, which utilized a TC35892 GPIO expander instead of using a lot of @@ -690,8 +496,6 @@ static void __init mop500_href_family_pinmaps_init(void) void __init mop500_pinmaps_init(void) { - pinctrl_register_mappings(mop500_family_pinmap, - ARRAY_SIZE(mop500_family_pinmap)); pinctrl_register_mappings(mop500_pinmap, ARRAY_SIZE(mop500_pinmap)); mop500_href_family_pinmaps_init(); @@ -705,8 +509,6 @@ void __init mop500_pinmaps_init(void) void __init snowball_pinmaps_init(void) { - pinctrl_register_mappings(mop500_family_pinmap, - ARRAY_SIZE(mop500_family_pinmap)); pinctrl_register_mappings(snowball_pinmap, ARRAY_SIZE(snowball_pinmap)); pinctrl_register_mappings(u8500_pinmap, @@ -717,8 +519,6 @@ void __init snowball_pinmaps_init(void) void __init hrefv60_pinmaps_init(void) { - pinctrl_register_mappings(mop500_family_pinmap, - ARRAY_SIZE(mop500_family_pinmap)); pinctrl_register_mappings(hrefv60_pinmap, ARRAY_SIZE(hrefv60_pinmap)); mop500_href_family_pinmaps_init(); |