diff options
Diffstat (limited to 'arch')
327 files changed, 9747 insertions, 6558 deletions
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index c929bea9a9ff..85710e078afb 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -1535,7 +1535,6 @@ config DEBUG_LL_INCLUDE DEBUG_IMX7D_UART default "debug/ks8695.S" if DEBUG_KS8695_UART default "debug/msm.S" if DEBUG_QCOM_UARTDM - default "debug/netx.S" if DEBUG_NETX_UART default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART default "debug/renesas-scif.S" if DEBUG_R7S72100_SCIF2 default "debug/renesas-scif.S" if DEBUG_RCAR_GEN1_SCIF0 @@ -1575,7 +1574,6 @@ config DEBUG_UART_8250 config DEBUG_UART_PHYS hex "Physical base address of debug UART" - default 0x00100a00 if DEBUG_NETX_UART default 0x01c20000 if DEBUG_DAVINCI_DMx_UART0 default 0x01c28000 if DEBUG_SUNXI_UART0 default 0x01c28400 if DEBUG_SUNXI_UART1 @@ -1700,7 +1698,6 @@ config DEBUG_UART_PHYS DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ DEBUG_LL_UART_EFM32 || \ DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \ - DEBUG_NETX_UART || \ DEBUG_QCOM_UARTDM || DEBUG_R7S72100_SCIF2 || \ DEBUG_RCAR_GEN1_SCIF0 || DEBUG_RCAR_GEN1_SCIF2 || \ DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF1 || \ @@ -1717,7 +1714,6 @@ config DEBUG_UART_VIRT default 0xc881f000 if DEBUG_RV1108_UART2 default 0xc8821000 if DEBUG_RV1108_UART1 default 0xc8912000 if DEBUG_RV1108_UART0 - default 0xe0000a00 if DEBUG_NETX_UART default 0xe0010fe0 if ARCH_RPC default 0xf0000be0 if ARCH_EBSA110 default 0xf0010000 if DEBUG_ASM9260_UART @@ -1822,7 +1818,6 @@ config DEBUG_UART_VIRT default DEBUG_UART_PHYS if !MMU depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \ - DEBUG_NETX_UART || \ DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \ DEBUG_S3C64XX_UART || \ DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \ diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 9159fa2cea90..a84a04cf894b 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -905,6 +905,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3188-radxarock.dtb \ rk3228-evb.dtb \ rk3229-evb.dtb \ + rk3229-xms6.dtb \ rk3288-evb-act8846.dtb \ rk3288-evb-rk808.dtb \ rk3288-fennec.dtb \ @@ -919,6 +920,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3288-tinker.dtb \ rk3288-tinker-s.dtb \ rk3288-veyron-brain.dtb \ + rk3288-veyron-fievel.dtb \ rk3288-veyron-jaq.dtb \ rk3288-veyron-jerry.dtb \ rk3288-veyron-mickey.dtb \ @@ -926,6 +928,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3288-veyron-minnie.dtb \ rk3288-veyron-pinky.dtb \ rk3288-veyron-speedy.dtb \ + rk3288-veyron-tiger.dtb \ rk3288-vyasa.dtb dtb-$(CONFIG_ARCH_S3C24XX) += \ s3c2416-smdk2416.dtb diff --git a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts index 18d0ae46e76c..0faae8950375 100644 --- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts +++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts @@ -124,6 +124,9 @@ }; mdio-bus-mux { + #address-cells = <1>; + #size-cells = <0>; + /* BIT(9) = 1 => external mdio */ mdio_ext: mdio@200 { reg = <0x200>; diff --git a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi index 462a5409b1de..dfceb155b3a7 100644 --- a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi +++ b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi @@ -377,7 +377,7 @@ buck1_reg: BUCK1 { regulator-name = "vdd_mif"; regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; regulator-always-on; regulator-boot-on; op_mode = <1>; /* Normal Mode */ @@ -386,7 +386,7 @@ buck2_reg: BUCK2 { regulator-name = "vdd_arm"; regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1456250>; + regulator-max-microvolt = <1456250>; regulator-always-on; regulator-boot-on; op_mode = <1>; /* Normal Mode */ @@ -395,7 +395,7 @@ buck3_reg: BUCK3 { regulator-name = "vdd_int"; regulator-min-microvolt = <875000>; - regulator-max-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; regulator-always-on; regulator-boot-on; op_mode = <1>; /* Normal Mode */ @@ -404,7 +404,7 @@ buck4_reg: BUCK4 { regulator-name = "vdd_g3d"; regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; regulator-always-on; regulator-boot-on; op_mode = <1>; /* Normal Mode */ @@ -413,7 +413,7 @@ buck5_reg: BUCK5 { regulator-name = "vdd_m12"; regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; regulator-always-on; regulator-boot-on; op_mode = <1>; /* Normal Mode */ @@ -422,7 +422,7 @@ buck6_reg: BUCK6 { regulator-name = "vdd12_5m"; regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; regulator-always-on; regulator-boot-on; op_mode = <1>; /* Normal Mode */ @@ -431,7 +431,7 @@ buck7_reg: BUCK7 { regulator-name = "pvdd_buck7"; regulator-min-microvolt = <750000>; - regulator-max-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; regulator-boot-on; regulator-always-on; op_mode = <1>; /* Normal Mode */ @@ -440,7 +440,7 @@ buck8_reg: BUCK8 { regulator-name = "pvdd_buck8"; regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; regulator-boot-on; regulator-always-on; op_mode = <1>; /* Normal Mode */ @@ -449,7 +449,7 @@ buck9_reg: BUCK9 { regulator-name = "vddf28_emmc"; regulator-min-microvolt = <750000>; - regulator-max-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; op_mode = <1>; /* Normal Mode */ }; }; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index d5e0392b409e..30f6f5c6bbcb 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -346,6 +346,7 @@ clock-names = "sata", "sclk_sata"; phys = <&sata_phy>; phy-names = "sata-phy"; + ports-implemented = <0x1>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 55d4dbf6f83a..7d51e0f4ab79 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -294,11 +294,11 @@ label = "MFC"; }; - msc_pd: power-domain@10044120 { + g3d_pd: power-domain@10044080 { compatible = "samsung,exynos4210-pd"; - reg = <0x10044120 0x20>; + reg = <0x10044080 0x20>; #power-domain-cells = <0>; - label = "MSC"; + label = "G3D"; }; disp_pd: power-domain@100440c0 { @@ -315,6 +315,13 @@ label = "MAU"; }; + msc_pd: power-domain@10044120 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10044120 0x20>; + #power-domain-cells = <0>; + label = "MSC"; + }; + pinctrl_0: pinctrl@13400000 { compatible = "samsung,exynos5420-pinctrl"; reg = <0x13400000 0x1000>; diff --git a/arch/arm/boot/dts/exynos5800.dtsi b/arch/arm/boot/dts/exynos5800.dtsi index 57d3b319fd65..de639eecc5c9 100644 --- a/arch/arm/boot/dts/exynos5800.dtsi +++ b/arch/arm/boot/dts/exynos5800.dtsi @@ -131,3 +131,12 @@ &mfc { compatible = "samsung,mfc-v8"; }; + +&soc { + cam_pd: power-domain@10045100 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10045100 0x20>; + #power-domain-cells = <0>; + label = "CAM"; + }; +}; diff --git a/arch/arm/boot/dts/gemini-nas4220b.dts b/arch/arm/boot/dts/gemini-nas4220b.dts index f4535d635f3b..521714f38eed 100644 --- a/arch/arm/boot/dts/gemini-nas4220b.dts +++ b/arch/arm/boot/dts/gemini-nas4220b.dts @@ -20,7 +20,7 @@ }; chosen { - bootargs = "console=ttyS0,19200n8"; + bootargs = "console=ttyS0,19200n8 root=/dev/mtdblock3 rw rootfstype=squashfs,jffs2 rootwait"; stdout-path = &uart0; }; @@ -81,37 +81,10 @@ /* 16MB of flash */ reg = <0x30000000 0x01000000>; - partition@0 { - label = "RedBoot"; - reg = <0x00000000 0x00020000>; - read-only; - }; - partition@20000 { - label = "Kernel"; - reg = <0x00020000 0x00300000>; - }; - partition@320000 { - label = "Ramdisk"; - reg = <0x00320000 0x00600000>; - }; - partition@920000 { - label = "Application"; - reg = <0x00920000 0x00600000>; - }; - partition@f20000 { - label = "VCTL"; - reg = <0x00f20000 0x00020000>; - read-only; - }; - partition@f40000 { - label = "CurConf"; - reg = <0x00f40000 0x000a0000>; - read-only; - }; - partition@fe0000 { - label = "FIS directory"; - reg = <0x00fe0000 0x00020000>; - read-only; + partitions { + compatible = "redboot-fis"; + /* Eraseblock at 0xfe0000 */ + fis-index-block = <0x1fc>; }; }; diff --git a/arch/arm/boot/dts/gemini-sl93512r.dts b/arch/arm/boot/dts/gemini-sl93512r.dts index 2bb953440793..a98af0351906 100644 --- a/arch/arm/boot/dts/gemini-sl93512r.dts +++ b/arch/arm/boot/dts/gemini-sl93512r.dts @@ -24,7 +24,7 @@ }; chosen { - bootargs = "console=ttyS0,19200n8 root=/dev/sda1 rw rootwait"; + bootargs = "console=ttyS0,19200n8 root=/dev/mtdblock3 rw rootfstype=squashfs,jffs2 rootwait"; stdout-path = &uart0; }; @@ -36,8 +36,8 @@ wakeup-source; linux,code = <KEY_WPS_BUTTON>; label = "WPS"; - /* Conflict with NAND flash */ - gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; + /* Conflicts with TVC and extended flash */ + gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; }; button-setup { @@ -143,54 +143,30 @@ /* 16MB of flash */ reg = <0x30000000 0x01000000>; - partition@0 { - label = "BOOT"; - reg = <0x00000000 0x00020000>; - read-only; - }; - partition@120000 { - label = "Kern"; - reg = <0x00020000 0x00300000>; - }; - partition@320000 { - label = "Ramdisk"; - reg = <0x00320000 0x00600000>; - }; - partition@920000 { - label = "Application"; - reg = <0x00920000 0x00600000>; - }; - partition@f20000 { - label = "VCTL"; - reg = <0x00f20000 0x00020000>; - read-only; - }; - partition@f40000 { - label = "CurConf"; - reg = <0x00f40000 0x000a0000>; - read-only; - }; - partition@fe0000 { - label = "FIS directory"; - reg = <0x00fe0000 0x00020000>; - read-only; + partitions { + compatible = "redboot-fis"; + /* Eraseblock at 0xfe0000 */ + fis-index-block = <0x1fc>; }; }; syscon: syscon@40000000 { pinctrl { /* - * gpio0egrp cover line 16 used by HD LED - * gpio0fgrp cover line 17, 18 used by wireless LED and reset button - * gpio0hgrp cover line 21, 22 used by MDIO for Marvell PHY - * gpio0kgrp cover line 31 used by USB LED + * gpio0agrp cover line 0, used by WPS button + * gpio0fgrp cover line 16 used by HD LED + * gpio0ggrp cover line 17, 18 used by wireless LAN LED and + * reset button OR USB ID select on 17 and USB VBUS select + * on 18. (Confusing.) + * gpio0igrp cover line 21, 22 used by MDIO for Marvell PHY */ gpio0_default_pins: pinctrl-gpio0 { mux { function = "gpio0"; - groups = "gpio0egrp", + groups = "gpio0agrp", "gpio0fgrp", - "gpio0hgrp"; + "gpio0ggrp", + "gpio0igrp"; }; }; /* diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi index cbe61b61a212..c2a9dd57e56a 100644 --- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi +++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi @@ -112,7 +112,7 @@ }; &i2c2 { - clock_frequency = <100000>; + clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6ul-geam.dts b/arch/arm/boot/dts/imx6ul-geam.dts index 21ddd359d3ed..9f63706383a7 100644 --- a/arch/arm/boot/dts/imx6ul-geam.dts +++ b/arch/arm/boot/dts/imx6ul-geam.dts @@ -156,7 +156,7 @@ }; &i2c2 { - clock_frequency = <100000>; + clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6ul-isiot.dtsi b/arch/arm/boot/dts/imx6ul-isiot.dtsi index b26d4f57c655..cc9adce638f5 100644 --- a/arch/arm/boot/dts/imx6ul-isiot.dtsi +++ b/arch/arm/boot/dts/imx6ul-isiot.dtsi @@ -148,7 +148,7 @@ }; &i2c2 { - clock_frequency = <100000>; + clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6ul-pico-hobbit.dts b/arch/arm/boot/dts/imx6ul-pico-hobbit.dts index 39eeeddac39e..09f7ffa9ad8c 100644 --- a/arch/arm/boot/dts/imx6ul-pico-hobbit.dts +++ b/arch/arm/boot/dts/imx6ul-pico-hobbit.dts @@ -43,7 +43,7 @@ }; &i2c2 { - clock_frequency = <100000>; + clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6ul-pico-pi.dts b/arch/arm/boot/dts/imx6ul-pico-pi.dts index de07357b27fc..6cd7d5877d20 100644 --- a/arch/arm/boot/dts/imx6ul-pico-pi.dts +++ b/arch/arm/boot/dts/imx6ul-pico-pi.dts @@ -43,7 +43,7 @@ }; &i2c2 { - clock_frequency = <100000>; + clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; @@ -58,7 +58,7 @@ }; &i2c3 { - clock_frequency = <100000>; + clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/imx7ulp.dtsi index 992747a57442..56907bb4b329 100644 --- a/arch/arm/boot/dts/imx7ulp.dtsi +++ b/arch/arm/boot/dts/imx7ulp.dtsi @@ -186,7 +186,7 @@ reg = <0x40330200 0x200>; }; - usbphy1: usb-phy@0x40350000 { + usbphy1: usb-phy@40350000 { compatible = "fsl,imx7ulp-usbphy", "fsl,imx6ul-usbphy"; reg = <0x40350000 0x1000>; interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/meson8b-ec100.dts b/arch/arm/boot/dts/meson8b-ec100.dts index 96d239d8334e..bed1dfef1985 100644 --- a/arch/arm/boot/dts/meson8b-ec100.dts +++ b/arch/arm/boot/dts/meson8b-ec100.dts @@ -219,6 +219,27 @@ */ vin-supply = <&vcc_3v3>; }; + + vddee: regulator-vddee { + /* + * Silergy SY8089AAC-GP 2A continuous, 3A peak, 1MHz + * Synchronous Step Down Regulator. Also called VDDAO + * in a part of the schematics. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDEE"; + regulator-min-microvolt = <860000>; + regulator-max-microvolt = <1140000>; + + vin-supply = <&vcc_5v>; + + pwms = <&pwm_cd 1 1148 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; }; &cpu0 { @@ -269,6 +290,10 @@ }; }; +&mali { + mali-supply = <&vddee>; +}; + &saradc { status = "okay"; vref-supply = <&vcc_1v8>; @@ -350,10 +375,10 @@ &pwm_cd { status = "okay"; - pinctrl-0 = <&pwm_c1_pins>; + pinctrl-0 = <&pwm_c1_pins>, <&pwm_d_pins>; pinctrl-names = "default"; - clocks = <&clkc CLKID_XTAL>; - clock-names = "clkin0"; + clocks = <&clkc CLKID_XTAL>, <&clkc CLKID_XTAL>; + clock-names = "clkin0", "clkin1"; }; &rtc { diff --git a/arch/arm/boot/dts/meson8b-mxq.dts b/arch/arm/boot/dts/meson8b-mxq.dts index bb27b34eb346..6e39ad52e42d 100644 --- a/arch/arm/boot/dts/meson8b-mxq.dts +++ b/arch/arm/boot/dts/meson8b-mxq.dts @@ -76,6 +76,22 @@ regulator-boot-on; regulator-always-on; }; + + vddee: regulator-vddee { + compatible = "pwm-regulator"; + + regulator-name = "VDDEE"; + regulator-min-microvolt = <860000>; + regulator-max-microvolt = <1140000>; + + vin-supply = <&vcc_5v>; + + pwms = <&pwm_cd 1 1148 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; }; &cpu0 { @@ -112,6 +128,10 @@ }; }; +&mali { + mali-supply = <&vddee>; +}; + &saradc { status = "okay"; vref-supply = <&vcc_1v8>; @@ -143,10 +163,10 @@ &pwm_cd { status = "okay"; - pinctrl-0 = <&pwm_c1_pins>; + pinctrl-0 = <&pwm_c1_pins>, <&pwm_d_pins>; pinctrl-names = "default"; - clocks = <&clkc CLKID_XTAL>; - clock-names = "clkin0"; + clocks = <&clkc CLKID_XTAL>, <&clkc CLKID_XTAL>; + clock-names = "clkin0", "clkin1"; }; &uart_AO { diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts index 86c4614e0a38..a24eccc354b9 100644 --- a/arch/arm/boot/dts/meson8b-odroidc1.dts +++ b/arch/arm/boot/dts/meson8b-odroidc1.dts @@ -154,6 +154,23 @@ vin-supply = <&p5v0>; }; + vddee: regulator-vddee { + /* Monolithic Power Systems MP2161 */ + compatible = "pwm-regulator"; + + regulator-name = "VDDEE"; + regulator-min-microvolt = <860000>; + regulator-max-microvolt = <1140000>; + + vin-supply = <&p5v0>; + + pwms = <&pwm_cd 1 12218 0>; + pwm-dutycycle-range = <91 0>; + + regulator-boot-on; + regulator-always-on; + }; + vdd_rtc: regulator-vdd-rtc { /* * Torex Semiconductor XC6215 configured for a fixed output of @@ -173,6 +190,12 @@ cpu-supply = <&vcck>; }; +&efuse { + ethernet_mac_address: mac@1b4 { + reg = <0x1b4 0x6>; + }; +}; + ðmac { status = "okay"; @@ -183,6 +206,9 @@ phy-handle = <ð_phy>; amlogic,tx-delay-ns = <4>; + nvmem-cells = <ðernet_mac_address>; + nvmem-cell-names = "mac-address"; + mdio { compatible = "snps,dwmac-mdio"; #address-cells = <1>; @@ -276,6 +302,10 @@ pinctrl-names = "default"; }; +&mali { + mali-supply = <&vddee>; +}; + &saradc { status = "okay"; vref-supply = <&vcc_1v8>; @@ -308,10 +338,10 @@ &pwm_cd { status = "okay"; - pinctrl-0 = <&pwm_c1_pins>; + pinctrl-0 = <&pwm_c1_pins>, <&pwm_d_pins>; pinctrl-names = "default"; - clocks = <&clkc CLKID_XTAL>; - clock-names = "clkin0"; + clocks = <&clkc CLKID_XTAL>, <&clkc CLKID_XTAL>; + clock-names = "clkin0", "clkin1"; }; &rtc { diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi index fba2c70c2fda..099bf8e711c9 100644 --- a/arch/arm/boot/dts/meson8b.dtsi +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -361,6 +361,14 @@ }; }; + pwm_d_pins: pwm-d { + mux { + groups = "pwm_d"; + function = "pwm_d"; + bias-disable; + }; + }; + uart_b0_pins: uart-b0 { mux { groups = "uart_tx_b0", @@ -410,6 +418,8 @@ <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL2>; clock-names = "stmmaceth", "clkin0", "clkin1"; + rx-fifo-depth = <4096>; + tx-fifo-depth = <2048>; resets = <&reset RESET_ETHERNET>; reset-names = "stmmaceth"; diff --git a/arch/arm/boot/dts/nspire-classic.dtsi b/arch/arm/boot/dts/nspire-classic.dtsi index c53f42777851..41744cc2bc72 100644 --- a/arch/arm/boot/dts/nspire-classic.dtsi +++ b/arch/arm/boot/dts/nspire-classic.dtsi @@ -8,7 +8,11 @@ /include/ "nspire.dtsi" &lcd { - lcd-type = "classic"; + port { + clcd_pads: endpoint { + remote-endpoint = <&panel_in>; + }; + }; }; &fast_timer { @@ -69,6 +73,15 @@ #interrupt-cells = <1>; }; }; + + panel { + compatible = "ti,nspire-classic-lcd-panel"; + port { + panel_in: endpoint { + remote-endpoint = <&clcd_pads>; + }; + }; + }; chosen { bootargs = "debug earlyprintk console=tty0 console=ttyS0,115200n8 root=/dev/ram0"; }; diff --git a/arch/arm/boot/dts/nspire-cx.dts b/arch/arm/boot/dts/nspire-cx.dts index da95c3736651..0c16b04e2744 100644 --- a/arch/arm/boot/dts/nspire-cx.dts +++ b/arch/arm/boot/dts/nspire-cx.dts @@ -9,7 +9,11 @@ /include/ "nspire.dtsi" &lcd { - lcd-type = "cx"; + port { + clcd_pads: endpoint { + remote-endpoint = <&panel_in>; + }; + }; }; &fast_timer { @@ -106,6 +110,15 @@ }; }; }; + + panel { + compatible = "ti,nspire-cx-lcd-panel"; + port { + panel_in: endpoint { + remote-endpoint = <&clcd_pads>; + }; + }; + }; chosen { bootargs = "debug earlyprintk console=tty0 console=ttyAMA0,115200n8 root=/dev/ram0"; }; diff --git a/arch/arm/boot/dts/nspire.dtsi b/arch/arm/boot/dts/nspire.dtsi index c35fd6667716..d9a0fd7524dc 100644 --- a/arch/arm/boot/dts/nspire.dtsi +++ b/arch/arm/boot/dts/nspire.dtsi @@ -95,8 +95,14 @@ reg = <0xC0000000 0x1000>; interrupts = <21>; - clocks = <&apb_pclk>; - clock-names = "apb_pclk"; + /* + * We assume the same clock is fed to APB and CLCDCLK. + * There is some code to scale the clock down by a factor + * 48 for the display so likely the frequency to the + * display is 1MHz and the CLCDCLK is 48 MHz. + */ + clocks = <&apb_pclk>, <&apb_pclk>; + clock-names = "clcdclk", "apb_pclk"; }; adc: adc@C4000000 { diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi index 56cb10b42ed9..51806c7f486a 100644 --- a/arch/arm/boot/dts/r8a77470.dtsi +++ b/arch/arm/boot/dts/r8a77470.dtsi @@ -63,6 +63,13 @@ clock-frequency = <0>; }; + pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts-extended = <&gic GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>; + }; + /* External SCIF clock */ scif_clk: scif { compatible = "fixed-clock"; diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index 3ff259207527..ebf5b7cfe215 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -296,7 +296,7 @@ <&cpg_clocks R8A7779_CLK_S>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; status = "disabled"; }; @@ -309,7 +309,7 @@ <&cpg_clocks R8A7779_CLK_S>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi index 0290ea4edd32..c776321b2cc4 100644 --- a/arch/arm/boot/dts/rk3036.dtsi +++ b/arch/arm/boot/dts/rk3036.dtsi @@ -484,7 +484,7 @@ compatible = "rockchip,rockchip-spi"; reg = <0x20074000 0x1000>; interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; - clocks =<&cru PCLK_SPI>, <&cru SCLK_SPI>; + clocks = <&cru PCLK_SPI>, <&cru SCLK_SPI>; clock-names = "apb-pclk","spi_pclk"; dmas = <&pdma 8>, <&pdma 9>; dma-names = "tx", "rx"; diff --git a/arch/arm/boot/dts/rk3229-xms6.dts b/arch/arm/boot/dts/rk3229-xms6.dts new file mode 100644 index 000000000000..679fc2b00e5a --- /dev/null +++ b/arch/arm/boot/dts/rk3229-xms6.dts @@ -0,0 +1,283 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include "rk3229.dtsi" + +/ { + model = "Mecer Xtreme Mini S6"; + compatible = "mecer,xms6", "rockchip,rk3229"; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x40000000>; + }; + + dc_12v: dc-12v-regulator { + compatible = "regulator-fixed"; + regulator-name = "dc_12v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + ext_gmac: ext_gmac { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "ext_gmac"; + #clock-cells = <0>; + }; + + power-led { + compatible = "gpio-leds"; + + blue { + gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + vcc_host: vcc-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&host_vbus_drv>; + regulator-name = "vcc_host"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + }; + + vcc_phy: vcc-phy-regulator { + compatible = "regulator-fixed"; + enable-active-high; + regulator-name = "vcc_phy"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vccio_1v8>; + }; + + vcc_sys: vcc-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_12v>; + }; + + vccio_1v8: vccio-1v8-regulator { + compatible = "regulator-fixed"; + regulator-name = "vccio_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + vin-supply = <&vcc_sys>; + }; + + vccio_3v3: vccio-3v3-regulator { + compatible = "regulator-fixed"; + regulator-name = "vccio_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + vin-supply = <&vcc_sys>; + }; + + vdd_arm: vdd-arm-regulator { + compatible = "pwm-regulator"; + pwms = <&pwm1 0 25000 1>; + pwm-supply = <&vcc_sys>; + regulator-name = "vdd_arm"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_log: vdd-log-regulator { + compatible = "pwm-regulator"; + pwms = <&pwm2 0 25000 1>; + pwm-supply = <&vcc_sys>; + regulator-name = "vdd_log"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&cpu0 { + cpu-supply = <&vdd_arm>; +}; + +&cpu1 { + cpu-supply = <&vdd_arm>; +}; + +&cpu2 { + cpu-supply = <&vdd_arm>; +}; + +&cpu3 { + cpu-supply = <&vdd_arm>; +}; + +&emmc { + cap-mmc-highspeed; + disable-wp; + non-removable; + status = "okay"; +}; + +&gmac { + assigned-clocks = <&cru SCLK_MAC_SRC>; + assigned-clock-rates = <50000000>; + clock_in_out = "output"; + phy-handle = <&phy>; + phy-mode = "rmii"; + phy-supply = <&vcc_phy>; + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + phy: phy@0 { + compatible = "ethernet-phy-id1234.d400", + "ethernet-phy-ieee802.3-c22"; + reg = <0>; + clocks = <&cru SCLK_MAC_PHY>; + phy-is-integrated; + resets = <&cru SRST_MACPHY>; + }; + }; +}; + +&gpu { + mali-supply = <&vdd_log>; + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_phy { + status = "okay"; +}; + +&iep_mmu { + status = "okay"; +}; + +&io_domains { + status = "okay"; + + vccio1-supply = <&vccio_3v3>; + vccio2-supply = <&vccio_1v8>; + vccio4-supply = <&vccio_3v3>; +}; + +&pinctrl { + usb { + host_vbus_drv: host-vbus-drv { + rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm1 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&sdmmc { + cap-mmc-highspeed; + disable-wp; + status = "okay"; +}; + +&tsadc { + rockchip,hw-tshut-mode = <0>; + status = "okay"; +}; + +&u2phy0 { + status = "okay"; + + u2phy0_host: host-port { + phy-supply = <&vcc_host>; + status = "okay"; + }; + + u2phy0_otg: otg-port { + phy-supply = <&vcc_host>; + status = "okay"; + }; +}; + +&u2phy1 { + status = "okay"; + + u2phy1_host: host-port { + phy-supply = <&vcc_host>; + status = "okay"; + }; + + u2phy1_otg: otg-port { + phy-supply = <&vcc_host>; + status = "okay"; + }; +}; + +&uart2 { + pinctrl-0 = <&uart21_xfer>; + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usb_host2_ehci { + status = "okay"; +}; + +&usb_host2_ohci { + status = "okay"; +}; + +&usb_otg { + status = "okay"; +}; + +&vop { + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi index 820440715302..2afd686b2033 100644 --- a/arch/arm/boot/dts/rk3288-evb.dtsi +++ b/arch/arm/boot/dts/rk3288-evb.dtsi @@ -97,7 +97,7 @@ }; panel: panel { - compatible ="lg,lp079qx1-sp0v", "simple-panel"; + compatible = "lg,lp079qx1-sp0v", "simple-panel"; backlight = <&backlight>; enable-gpios = <&gpio7 RK_PA4 GPIO_ACTIVE_HIGH>; pinctrl-0 = <&lcd_cs>; diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi index 293576869546..81e4e953d4a4 100644 --- a/arch/arm/boot/dts/rk3288-tinker.dtsi +++ b/arch/arm/boot/dts/rk3288-tinker.dtsi @@ -47,13 +47,13 @@ compatible = "gpio-leds"; act-led { - gpios=<&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>; - linux,default-trigger="mmc0"; + gpios = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; }; heartbeat-led { - gpios=<&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>; - linux,default-trigger="heartbeat"; + gpios = <&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; }; pwr-led { @@ -443,7 +443,7 @@ &saradc { vref-supply = <&vcc18_ldo1>; - status ="okay"; + status = "okay"; }; &sdmmc { @@ -516,7 +516,7 @@ }; &usb_otg { - status= "okay"; + status = "okay"; }; &vopb { diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi index 1cadb522fd0d..ffb60f880b39 100644 --- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi @@ -10,6 +10,7 @@ #include <dt-bindings/input/input.h> #include "rk3288-veyron.dtsi" #include "rk3288-veyron-analog-audio.dtsi" +#include "rk3288-veyron-edp.dtsi" #include "rk3288-veyron-sdmmc.dtsi" / { @@ -18,50 +19,6 @@ i2c20 = &i2c_tunnel; }; - backlight: backlight { - compatible = "pwm-backlight"; - brightness-levels = < - 0 1 2 3 4 5 6 7 - 8 9 10 11 12 13 14 15 - 16 17 18 19 20 21 22 23 - 24 25 26 27 28 29 30 31 - 32 33 34 35 36 37 38 39 - 40 41 42 43 44 45 46 47 - 48 49 50 51 52 53 54 55 - 56 57 58 59 60 61 62 63 - 64 65 66 67 68 69 70 71 - 72 73 74 75 76 77 78 79 - 80 81 82 83 84 85 86 87 - 88 89 90 91 92 93 94 95 - 96 97 98 99 100 101 102 103 - 104 105 106 107 108 109 110 111 - 112 113 114 115 116 117 118 119 - 120 121 122 123 124 125 126 127 - 128 129 130 131 132 133 134 135 - 136 137 138 139 140 141 142 143 - 144 145 146 147 148 149 150 151 - 152 153 154 155 156 157 158 159 - 160 161 162 163 164 165 166 167 - 168 169 170 171 172 173 174 175 - 176 177 178 179 180 181 182 183 - 184 185 186 187 188 189 190 191 - 192 193 194 195 196 197 198 199 - 200 201 202 203 204 205 206 207 - 208 209 210 211 212 213 214 215 - 216 217 218 219 220 221 222 223 - 224 225 226 227 228 229 230 231 - 232 233 234 235 236 237 238 239 - 240 241 242 243 244 245 246 247 - 248 249 250 251 252 253 254 255>; - default-brightness-level = <128>; - enable-gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&bl_en>; - pwms = <&pwm0 0 1000000 0>; - post-pwm-on-delay-ms = <10>; - pwm-off-delay-ms = <10>; - }; - gpio-charger { compatible = "gpio-charger"; charger-type = "mains"; @@ -85,21 +42,6 @@ }; }; - panel: panel { - compatible ="innolux,n116bge", "simple-panel"; - status = "okay"; - power-supply = <&vcc33_lcd>; - backlight = <&backlight>; - - ports { - panel_in: port { - panel_in_edp: endpoint { - remote-endpoint = <&edp_out_panel>; - }; - }; - }; - }; - /* A non-regulated voltage from power supply or battery */ vccsys: vccsys { compatible = "regulator-fixed"; @@ -141,33 +83,6 @@ }; }; -&edp { - status = "okay"; - - pinctrl-names = "default"; - pinctrl-0 = <&edp_hpd>; - - ports { - edp_out: port@1 { - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - edp_out_panel: endpoint@0 { - reg = <0>; - remote-endpoint = <&panel_in_edp>; - }; - }; - }; -}; - -&edp_phy { - status = "okay"; -}; - -&pwm0 { - status = "okay"; -}; - &rk808 { vcc11-supply = <&vcc_5v>; @@ -220,14 +135,6 @@ }; }; -&vopl { - status = "okay"; -}; - -&vopl_mmu { - status = "okay"; -}; - &pinctrl { pinctrl-0 = < /* Common for sleep and wake, but no owners */ @@ -250,12 +157,6 @@ &bt_dev_wake_sleep >; - backlight { - bl_en: bl-en { - rockchip,pins = <7 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - buttons { ap_lid_int_l: ap-lid-int-l { rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; diff --git a/arch/arm/boot/dts/rk3288-veyron-edp.dtsi b/arch/arm/boot/dts/rk3288-veyron-edp.dtsi new file mode 100644 index 000000000000..b12e061c5f7f --- /dev/null +++ b/arch/arm/boot/dts/rk3288-veyron-edp.dtsi @@ -0,0 +1,172 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Veyron (and derivatives) fragment for the edp displays + * + * Copyright 2019 Google LLC + */ + +/ { + backlight_regulator: backlight-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bl_pwr_en>; + regulator-name = "backlight_regulator"; + vin-supply = <&vcc33_sys>; + startup-delay-us = <15000>; + }; + + panel_regulator: panel-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_enable_h>; + regulator-name = "panel_regulator"; + vin-supply = <&vcc33_sys>; + }; + + vcc18_lcd: vcc18-lcd { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&avdd_1v8_disp_en>; + regulator-name = "vcc18_lcd"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc18_wl>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + brightness-levels = < + 0 1 2 3 4 5 6 7 + 8 9 10 11 12 13 14 15 + 16 17 18 19 20 21 22 23 + 24 25 26 27 28 29 30 31 + 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 + 48 49 50 51 52 53 54 55 + 56 57 58 59 60 61 62 63 + 64 65 66 67 68 69 70 71 + 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 + 88 89 90 91 92 93 94 95 + 96 97 98 99 100 101 102 103 + 104 105 106 107 108 109 110 111 + 112 113 114 115 116 117 118 119 + 120 121 122 123 124 125 126 127 + 128 129 130 131 132 133 134 135 + 136 137 138 139 140 141 142 143 + 144 145 146 147 148 149 150 151 + 152 153 154 155 156 157 158 159 + 160 161 162 163 164 165 166 167 + 168 169 170 171 172 173 174 175 + 176 177 178 179 180 181 182 183 + 184 185 186 187 188 189 190 191 + 192 193 194 195 196 197 198 199 + 200 201 202 203 204 205 206 207 + 208 209 210 211 212 213 214 215 + 216 217 218 219 220 221 222 223 + 224 225 226 227 228 229 230 231 + 232 233 234 235 236 237 238 239 + 240 241 242 243 244 245 246 247 + 248 249 250 251 252 253 254 255>; + default-brightness-level = <128>; + enable-gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bl_en>; + pwms = <&pwm0 0 1000000 0>; + post-pwm-on-delay-ms = <10>; + pwm-off-delay-ms = <10>; + power-supply = <&backlight_regulator>; + }; + + panel: panel { + compatible = "innolux,n116bge", "simple-panel"; + status = "okay"; + power-supply = <&panel_regulator>; + backlight = <&backlight>; + + panel-timing { + clock-frequency = <74250000>; + hactive = <1366>; + hfront-porch = <136>; + hback-porch = <60>; + hsync-len = <30>; + hsync-active = <0>; + vactive = <768>; + vfront-porch = <8>; + vback-porch = <12>; + vsync-len = <12>; + vsync-active = <0>; + }; + + ports { + panel_in: port { + panel_in_edp: endpoint { + remote-endpoint = <&edp_out_panel>; + }; + }; + }; + }; +}; + +&edp { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&edp_hpd>; + + ports { + edp_out: port@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + edp_out_panel: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_in_edp>; + }; + }; + }; +}; + +&edp_phy { + status = "okay"; +}; + +&pwm0 { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; + +&pinctrl { + backlight { + bl_pwr_en: bl_pwr_en { + rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bl_en: bl-en { + rockchip,pins = <7 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + lcd { + lcd_enable_h: lcd-en { + rockchip,pins = <7 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + avdd_1v8_disp_en: avdd-1v8-disp-en { + rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; diff --git a/arch/arm/boot/dts/rk3288-veyron-fievel.dts b/arch/arm/boot/dts/rk3288-veyron-fievel.dts new file mode 100644 index 000000000000..9a0f55085839 --- /dev/null +++ b/arch/arm/boot/dts/rk3288-veyron-fievel.dts @@ -0,0 +1,522 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Veyron Fievel Rev 0+ board device tree source + * + * Copyright 2016 Google, Inc + */ + +/dts-v1/; +#include "rk3288-veyron.dtsi" +#include "rk3288-veyron-analog-audio.dtsi" + +/ { + model = "Google Fievel"; + compatible = "google,veyron-fievel-rev8", "google,veyron-fievel-rev7", + "google,veyron-fievel-rev6", "google,veyron-fievel-rev5", + "google,veyron-fievel-rev4", "google,veyron-fievel-rev3", + "google,veyron-fievel-rev2", "google,veyron-fievel-rev1", + "google,veyron-fievel-rev0", "google,veyron-fievel", + "google,veyron", "rockchip,rk3288"; + + /delete-node/ bt-activity; + + vccsys: vccsys { + compatible = "regulator-fixed"; + regulator-name = "vccsys"; + regulator-boot-on; + regulator-always-on; + }; + + /* + * vcc33_pmuio and vcc33_io is sourced directly from vcc33_sys, + * enabled by vcc_18 + */ + vcc33_io: vcc33-io { + compatible = "regulator-fixed"; + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc33_io"; + }; + + vcc5_host1: vcc5-host1-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio5 RK_PC2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hub_usb1_pwr_en>; + regulator-name = "vcc5_host1"; + regulator-always-on; + regulator-boot-on; + }; + + vcc5_host2: vcc5-host2-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio5 RK_PB6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hub_usb2_pwr_en>; + regulator-name = "vcc5_host2"; + regulator-always-on; + regulator-boot-on; + }; + + vcc5v_otg: vcc5v-otg-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_otg_pwr_en>; + regulator-name = "vcc5_otg"; + regulator-always-on; + regulator-boot-on; + }; + + ext_gmac: external-gmac-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + clock-output-names = "ext_gmac"; + }; +}; + +&gmac { + status = "okay"; + + assigned-clocks = <&cru SCLK_MAC>; + assigned-clock-parents = <&ext_gmac>; + clock_in_out = "input"; + phy-handle = <ðphy>; + phy-mode = "rgmii"; + phy-supply = <&vcc33_lan>; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>; + rx_delay = <0x10>; + tx_delay = <0x30>; + + /* + * Reset for the RTL8211 PHY which requires a 10-ms reset pulse (low) + * with a 30ms settling time. + */ + snps,reset-gpio = <&gpio4 RK_PB0 0>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 30000>; + wakeup-source; + + mdio0 { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@1 { + reg = <1>; + }; + }; +}; + +&rk808 { + dvs-gpios = <&gpio7 RK_PB4 GPIO_ACTIVE_HIGH>, + <&gpio7 RK_PB7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>; + + vcc6-supply = <&vcc33_sys>; + vcc10-supply = <&vcc33_sys>; + vcc11-supply = <&vcc_5v>; + vcc12-supply = <&vcc33_sys>; + + regulators { + /delete-node/ LDO_REG1; + + /* + * According to the schematic, vcc18_lcdt is for + * HDMI_AVDD_1V8 + */ + vcc18_lcdt: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vdd18_lcdt"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + /* + * This is not a pwren anymore, but the real power supply, + * vdd10_lcd for HDMI_AVDD_1V0 + */ + vdd10_lcd: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd10_lcd"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + /* for usb camera */ + vcc33_ccd: LDO_REG8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc33_ccd"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc33_lan: SWITCH_REG2 { + regulator-name = "vcc33_lan"; + }; + }; +}; + +&sdio0 { + #address-cells = <1>; + #size-cells = <0>; + + btmrvl: btmrvl@2 { + compatible = "marvell,sd8897-bt"; + reg = <2>; + interrupt-parent = <&gpio4>; + interrupts = <RK_PD7 IRQ_TYPE_LEVEL_LOW>; + marvell,wakeup-pin = /bits/ 16 <13>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l>; + }; +}; + +&vcc50_hdmi { + enable-active-high; + gpio = <&gpio5 RK_PC3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc50_hdmi_en>; +}; + +&vcc_5v { + enable-active-high; + gpio = <&gpio7 RK_PC5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&drv_5v>; +}; + +&gpio0 { + gpio-line-names = "PMIC_SLEEP_AP", + "DDRIO_PWROFF", + "DDRIO_RETEN", + "TS3A227E_INT_L", + "PMIC_INT_L", + "PWR_KEY_L", + "HUB_USB1_nFALUT", + "PHY_PMEB", + + "PHY_INT", + "REC_MODE_L", + "OTP_OUT", + "", + "USB_OTG_POWER_EN", + "AP_WARM_RESET_H", + "USB_OTG_nFALUT", + "I2C0_SDA_PMIC", + + "I2C0_SCL_PMIC", + "DEVMODE_L", + "USB_INT"; +}; + +&gpio2 { + gpio-line-names = "CONFIG0", + "CONFIG1", + "CONFIG2", + "", + "", + "", + "", + "CONFIG3", + + "", + "EMMC_RST_L", + "", + "", + "BL_PWR_EN", + "", + "TOUCH_INT", + "TOUCH_RST", + + "I2C3_SCL_TP", + "I2C3_SDA_TP"; +}; + +&gpio3 { + gpio-line-names = "FLASH0_D0", + "FLASH0_D1", + "FLASH0_D2", + "FLASH0_D3", + "FLASH0_D4", + "FLASH0_D5", + "FLASH0_D6", + "FLASH0_D7", + + "VCC5V_GOOD_H", + "", + "", + "", + "", + "", + "", + "", + + "FLASH0_CS2/EMMC_CMD", + "", + "FLASH0_DQS/EMMC_CLKO", + "", + "", + "", + "", + "", + + "PHY_TXD2", + "PHY_TXD3", + "MAC_RXD2", + "MAC_RXD3", + "PHY_TXD0", + "PHY_TXD1", + "MAC_RXD0", + "MAC_RXD1"; +}; + +&gpio4 { + gpio-line-names = "MAC_MDC", + "MAC_RXDV", + "MAC_RXER", + "MAC_CLK", + "PHY_TXEN", + "MAC_MDIO", + "MAC_RXCLK", + "", + + "PHY_RST", + "PHY_TXCLK", + "", + "", + "", + "", + "", + "", + + "UART0_RXD", + "UART0_TXD", + "UART0_CTS_L", + "UART0_RTS_L", + "SDIO0_D0", + "SDIO0_D1", + "SDIO0_D2", + "SDIO0_D3", + + "SDIO0_CMD", + "SDIO0_CLK", + "BT_DEV_WAKE", + "", + "WIFI_ENABLE_H", + "BT_ENABLE_L", + "WIFI_HOST_WAKE", + "BT_HOST_WAKE"; +}; + +&gpio5 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + + "", + "", + "", + "", + "USB_OTG_CTL1", + "HUB_USB2_CTL1", + "HUB_USB2_PWR_EN", + "HUB_USB_ILIM_SEL", + + "USB_OTG_STATUS_L", + "HUB_USB1_CTL1", + "HUB_USB1_PWR_EN", + "VCC50_HDMI_EN"; +}; + +&gpio6 { + gpio-line-names = "I2S0_SCLK", + "I2S0_LRCK_RX", + "I2S0_LRCK_TX", + "I2S0_SDI", + "I2S0_SDO0", + "HP_DET_H", + "", + "INT_CODEC", + + "I2S0_CLK", + "I2C2_SDA", + "I2C2_SCL", + "MICDET", + "", + "", + "", + "", + + "HUB_USB2_nFALUT", + "USB_OTG_ILIM_SEL"; +}; + +&gpio7 { + gpio-line-names = "LCD_BL_PWM", + "PWM_LOG", + "BL_EN", + "PWR_LED1", + "TPM_INT_H", + "SPK_ON", + "FW_WP_AP", + "", + + "CPU_NMI", + "DVSOK", + "", + "EDP_HPD", + "DVS1", + "", + "LCD_EN", + "DVS2", + + "HDMI_CEC", + "I2C4_SDA", + "I2C4_SCL", + "I2C5_SDA_HDMI", + "I2C5_SCL_HDMI", + "5V_DRV", + "UART2_RXD", + "UART2_TXD"; +}; + +&gpio8 { + gpio-line-names = "RAM_ID0", + "RAM_ID1", + "RAM_ID2", + "RAM_ID3", + "I2C1_SDA_TPM", + "I2C1_SCL_TPM", + "SPI2_CLK", + "SPI2_CS0", + + "SPI2_RXD", + "SPI2_TXD"; +}; + +&pinctrl { + pinctrl-names = "default", "sleep"; + pinctrl-0 = < + /* Common for sleep and wake, but no owners */ + &ddr0_retention + &ddrio_pwroff + &global_pwroff + + /* For usb bc1.2 */ + &usb_otg_ilim_sel + &usb_usb_ilim_sel + + /* Wake only */ + &bt_dev_wake_awake + &pwr_led1_on + >; + + pinctrl-1 = < + /* Common for sleep and wake, but no owners */ + &ddr0_retention + &ddrio_pwroff + &global_pwroff + + /* For usb bc1.2 */ + &usb_otg_ilim_sel + &usb_usb_ilim_sel + + /* Sleep only */ + &bt_dev_wake_sleep + &pwr_led1_blink + >; + + buck-5v { + drv_5v: drv-5v { + rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + gmac { + phy_rst: phy-rst { + rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>; + }; + + phy_pmeb: phy-pmeb { + rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + phy_int: phy-int { + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + hdmi { + vcc50_hdmi_en: vcc50-hdmi-en { + rockchip,pins = <5 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + leds { + pwr_led1_on: pwr-led1-on { + rockchip,pins = <7 RK_PA3 RK_FUNC_GPIO &pcfg_output_low>; + }; + + pwr_led1_blink: pwr-led1-blink { + rockchip,pins = <7 RK_PA3 RK_FUNC_GPIO &pcfg_output_high>; + }; + }; + + pmic { + dvs_1: dvs-1 { + rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + dvs_2: dvs-2 { + rockchip,pins = <7 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + usb-bc12 { + usb_otg_ilim_sel: usb-otg-ilim-sel { + rockchip,pins = <6 RK_PC1 RK_FUNC_GPIO &pcfg_output_low>; + }; + + usb_usb_ilim_sel: usb-usb-ilim-sel { + rockchip,pins = <5 RK_PB7 RK_FUNC_GPIO &pcfg_output_low>; + }; + }; + + usb-host { + hub_usb1_pwr_en: hub_usb1_pwr_en { + rockchip,pins = <5 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + hub_usb2_pwr_en: hub_usb2_pwr_en { + rockchip,pins = <5 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + usb_otg_pwr_en: usb_otg_pwr_en { + rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; diff --git a/arch/arm/boot/dts/rk3288-veyron-jaq.dts b/arch/arm/boot/dts/rk3288-veyron-jaq.dts index fcd119168cb6..80386203e85b 100644 --- a/arch/arm/boot/dts/rk3288-veyron-jaq.dts +++ b/arch/arm/boot/dts/rk3288-veyron-jaq.dts @@ -16,40 +16,6 @@ "google,veyron-jaq-rev3", "google,veyron-jaq-rev2", "google,veyron-jaq-rev1", "google,veyron-jaq", "google,veyron", "rockchip,rk3288"; - - panel_regulator: panel-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&lcd_enable_h>; - regulator-name = "panel_regulator"; - startup-delay-us = <100000>; - vin-supply = <&vcc33_sys>; - }; - - vcc18_lcd: vcc18-lcd { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&avdd_1v8_disp_en>; - regulator-name = "vcc18_lcd"; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc18_wl>; - }; - - backlight_regulator: backlight-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&bl_pwr_en>; - regulator-name = "backlight_regulator"; - vin-supply = <&vcc33_sys>; - startup-delay-us = <15000>; - }; }; &backlight { @@ -87,11 +53,6 @@ 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255>; - power-supply = <&backlight_regulator>; -}; - -&panel { - power-supply = <&panel_regulator>; }; &rk808 { @@ -343,12 +304,6 @@ }; &pinctrl { - backlight { - bl_pwr_en: bl_pwr_en { - rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - buck-5v { drv_5v: drv-5v { rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; @@ -361,16 +316,6 @@ }; }; - lcd { - lcd_enable_h: lcd-en { - rockchip,pins = <7 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - avdd_1v8_disp_en: avdd-1v8-disp-en { - rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - pmic { dvs_1: dvs-1 { rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>; diff --git a/arch/arm/boot/dts/rk3288-veyron-jerry.dts b/arch/arm/boot/dts/rk3288-veyron-jerry.dts index 164561f04c1d..a6ee44f0fe13 100644 --- a/arch/arm/boot/dts/rk3288-veyron-jerry.dts +++ b/arch/arm/boot/dts/rk3288-veyron-jerry.dts @@ -18,48 +18,6 @@ "google,veyron-jerry-rev5", "google,veyron-jerry-rev4", "google,veyron-jerry-rev3", "google,veyron-jerry", "google,veyron", "rockchip,rk3288"; - - panel_regulator: panel-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&lcd_enable_h>; - regulator-name = "panel_regulator"; - startup-delay-us = <100000>; - vin-supply = <&vcc33_sys>; - }; - - vcc18_lcd: vcc18-lcd { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&avdd_1v8_disp_en>; - regulator-name = "vcc18_lcd"; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc18_wl>; - }; - - backlight_regulator: backlight-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&bl_pwr_en>; - regulator-name = "backlight_regulator"; - vin-supply = <&vcc33_sys>; - startup-delay-us = <15000>; - }; -}; - -&backlight { - power-supply = <&backlight_regulator>; -}; - -&panel { - power-supply= <&panel_regulator>; }; &rk808 { @@ -82,6 +40,155 @@ }; }; +&sdio0 { + #address-cells = <1>; + #size-cells = <0>; + + mwifiex: wifi@1 { + compatible = "marvell,sd8897"; + reg = <1>; + + marvell,caldata-txpwrlimit-2g = /bits/ 8 < +0x01 0x00 0x06 0x00 0x08 0x02 0x89 0x01 +0x24 0x00 0x67 0x09 0x14 0x01 0x00 0x0f 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c +0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c +0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01 0x24 0x00 0x67 0x09 0x14 0x02 0x00 0x0f +0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c 0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09 +0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01 +0x24 0x00 0x67 0x09 0x14 0x03 0x00 0x0f 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c +0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c +0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01 0x24 0x00 0x67 0x09 0x14 0x04 0x00 0x0f +0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c 0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09 +0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01 +0x24 0x00 0x67 0x09 0x14 0x05 0x00 0x0f 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c +0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c +0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01 0x24 0x00 0x67 0x09 0x14 0x06 0x00 0x0f +0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c 0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09 +0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01 +0x24 0x00 0x67 0x09 0x14 0x07 0x00 0x0f 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c +0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c +0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01 0x24 0x00 0x67 0x09 0x14 0x08 0x00 0x0f +0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c 0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09 +0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01 +0x24 0x00 0x67 0x09 0x14 0x09 0x00 0x0f 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c +0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c +0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01 0x24 0x00 0x67 0x09 0x14 0x0a 0x00 0x0f +0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c 0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09 +0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01 +0x24 0x00 0x67 0x09 0x14 0x0b 0x00 0x0f 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c +0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c +0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01 0x24 0x00 0x67 0x09 0x14 0x0c 0x00 0x0f +0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c 0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09 +0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x89 0x01 +0x24 0x00 0x67 0x09 0x14 0x0d 0x00 0x0f 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0c +0x05 0x0c 0x06 0x0c 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0c 0x0b 0x0c 0x0c 0x0c +0x0d 0x09 0x0e 0x09 0x0f 0x09>; + + marvell,caldata-txpwrlimit-5g-sub0 = /bits/ 8 < +0x01 0x00 0x06 0x00 0xf0 0x01 0x89 0x01 +0x3a 0x00 0x88 0x13 0x14 0x24 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a +0x06 0x0a 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x09 +0x0e 0x09 0x0f 0x09 0x10 0x05 0x11 0x05 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 +0x16 0x05 0x17 0x05 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 +0x88 0x13 0x14 0x28 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a +0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x09 0x0e 0x09 +0x0f 0x09 0x10 0x05 0x11 0x05 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x05 +0x17 0x05 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 +0x14 0x2c 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x09 +0x08 0x09 0x09 0x09 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x09 0x0e 0x09 0x0f 0x09 +0x10 0x05 0x11 0x05 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x05 0x17 0x05 +0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0x30 +0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x09 0x08 0x09 +0x09 0x09 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x10 0x05 +0x11 0x05 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x05 0x17 0x05 0x18 0x05 +0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0x34 0x01 0x0c +0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x09 0x08 0x09 0x09 0x09 +0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x10 0x05 0x11 0x05 +0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x05 0x17 0x05 0x18 0x05 0x19 0x05 +0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0x38 0x01 0x0c 0x02 0x0c +0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0a +0x0b 0x0a 0x0c 0x0a 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x10 0x05 0x11 0x05 0x12 0x05 +0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x05 0x17 0x05 0x18 0x05 0x19 0x05 0x1a 0x05 +0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0x3c 0x01 0x0c 0x02 0x0c 0x03 0x0c +0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0a 0x0b 0x0a +0x0c 0x0a 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x10 0x05 0x11 0x05 0x12 0x05 0x13 0x05 +0x14 0x05 0x15 0x05 0x16 0x05 0x17 0x05 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 +0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0x40 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a +0x05 0x0a 0x06 0x0a 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a +0x0d 0x09 0x0e 0x09 0x0f 0x09 0x10 0x05 0x11 0x05 0x12 0x05 0x13 0x05 0x14 0x05 +0x15 0x05 0x16 0x05 0x17 0x05 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05>; + + marvell,caldata-txpwrlimit-5g-sub1 = /bits/ 8 < +0x01 0x00 0x06 0x00 0xaa 0x02 0x89 0x01 +0x3a 0x00 0x88 0x13 0x14 0x64 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a +0x06 0x0a 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x09 +0x0e 0x09 0x0f 0x09 0x10 0x05 0x11 0x05 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 +0x16 0x05 0x17 0x05 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 +0x88 0x13 0x14 0x68 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a +0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x09 0x0e 0x09 +0x0f 0x09 0x10 0x05 0x11 0x05 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x05 +0x17 0x05 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 +0x14 0x6c 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x09 +0x08 0x09 0x09 0x09 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x09 0x0e 0x09 0x0f 0x09 +0x10 0x05 0x11 0x05 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x05 0x17 0x05 +0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0x70 +0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x09 0x08 0x09 +0x09 0x09 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x10 0x05 +0x11 0x05 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x05 0x17 0x05 0x18 0x05 +0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0x74 0x01 0x0c +0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x09 0x08 0x09 0x09 0x09 +0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x10 0x05 0x11 0x05 +0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x05 0x17 0x05 0x18 0x05 0x19 0x05 +0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0x78 0x01 0x0c 0x02 0x0c +0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0a +0x0b 0x0a 0x0c 0x0a 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x10 0x05 0x11 0x05 0x12 0x05 +0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x05 0x17 0x05 0x18 0x05 0x19 0x05 0x1a 0x05 +0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0x7c 0x01 0x0c 0x02 0x0c 0x03 0x0c +0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0a 0x0b 0x0a +0x0c 0x0a 0x0d 0x09 0x0e 0x09 0x0f 0x09 0x10 0x05 0x11 0x05 0x12 0x05 0x13 0x05 +0x14 0x05 0x15 0x05 0x16 0x05 0x17 0x05 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 +0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0x80 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a +0x05 0x0a 0x06 0x0a 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a +0x0d 0x09 0x0e 0x09 0x0f 0x09 0x10 0x05 0x11 0x05 0x12 0x05 0x13 0x05 0x14 0x05 +0x15 0x05 0x16 0x05 0x17 0x05 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 +0x3a 0x00 0x88 0x13 0x14 0x84 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a +0x06 0x0a 0x07 0x09 0x08 0x09 0x09 0x09 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x09 +0x0e 0x09 0x0f 0x09 0x10 0x05 0x11 0x05 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 +0x16 0x05 0x17 0x05 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 +0x88 0x13 0x14 0x88 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a +0x07 0x08 0x08 0x08 0x09 0x08 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x08 0x0e 0x08 +0x0f 0x08 0x10 0x04 0x11 0x04 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x04 +0x17 0x04 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 +0x14 0x8c 0x01 0x0c 0x02 0x0c 0x03 0x0c 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x08 +0x08 0x08 0x09 0x08 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x08 0x0e 0x08 0x0f 0x08 +0x10 0x04 0x11 0x04 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x04 0x17 0x04 +0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05>; + + marvell,caldata-txpwrlimit-5g-sub2 = /bits/ 8 < +0x01 0x00 0x06 0x00 0x36 0x01 0x89 0x01 +0x3a 0x00 0x88 0x13 0x14 0x95 0x01 0x0b 0x02 0x0b 0x03 0x0b 0x04 0x0a 0x05 0x0a +0x06 0x0a 0x07 0x08 0x08 0x08 0x09 0x08 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x08 +0x0e 0x08 0x0f 0x08 0x10 0x04 0x11 0x04 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 +0x16 0x04 0x17 0x04 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 +0x88 0x13 0x14 0x99 0x01 0x0b 0x02 0x0b 0x03 0x0b 0x04 0x0a 0x05 0x0a 0x06 0x0a +0x07 0x08 0x08 0x08 0x09 0x08 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x08 0x0e 0x08 +0x0f 0x08 0x10 0x04 0x11 0x04 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x04 +0x17 0x04 0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 +0x14 0x9d 0x01 0x0b 0x02 0x0b 0x03 0x0b 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x08 +0x08 0x08 0x09 0x08 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x08 0x0e 0x08 0x0f 0x08 +0x10 0x04 0x11 0x04 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x04 0x17 0x04 +0x18 0x05 0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0xa1 +0x01 0x0b 0x02 0x0b 0x03 0x0b 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x08 0x08 0x08 +0x09 0x08 0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x08 0x0e 0x08 0x0f 0x08 0x10 0x04 +0x11 0x04 0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x04 0x17 0x04 0x18 0x05 +0x19 0x05 0x1a 0x05 0x1b 0x05 0x89 0x01 0x3a 0x00 0x88 0x13 0x14 0xa5 0x01 0x0b +0x02 0x0b 0x03 0x0b 0x04 0x0a 0x05 0x0a 0x06 0x0a 0x07 0x08 0x08 0x08 0x09 0x08 +0x0a 0x0a 0x0b 0x0a 0x0c 0x0a 0x0d 0x08 0x0e 0x08 0x0f 0x08 0x10 0x04 0x11 0x04 +0x12 0x05 0x13 0x05 0x14 0x05 0x15 0x05 0x16 0x04 0x17 0x04 0x18 0x05 0x19 0x05 +0x1a 0x05 0x1b 0x05>; + }; +}; + &sdmmc { disable-wp; pinctrl-names = "default"; @@ -311,12 +418,6 @@ }; &pinctrl { - backlight { - bl_pwr_en: bl_pwr_en { - rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - buck-5v { drv_5v: drv-5v { rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; @@ -329,16 +430,6 @@ }; }; - lcd { - lcd_enable_h: lcd-en { - rockchip,pins = <7 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - avdd_1v8_disp_en: avdd-1v8-disp-en { - rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - pmic { dvs_1: dvs-1 { rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>; diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts index 9008e703c07e..55955b082501 100644 --- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts +++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts @@ -15,40 +15,6 @@ "google,veyron-minnie-rev0", "google,veyron-minnie", "google,veyron", "rockchip,rk3288"; - backlight_regulator: backlight-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&bl_pwr_en>; - regulator-name = "backlight_regulator"; - vin-supply = <&vcc33_sys>; - startup-delay-us = <15000>; - }; - - panel_regulator: panel-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&lcd_enable_h>; - regulator-name = "panel_regulator"; - startup-delay-us = <100000>; - vin-supply = <&vcc33_sys>; - }; - - vcc18_lcd: vcc18-lcd { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&avdd_1v8_disp_en>; - regulator-name = "vcc18_lcd"; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc18_wl>; - }; - volume_buttons: volume-buttons { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -105,7 +71,6 @@ 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255>; - power-supply = <&backlight_regulator>; }; &i2c_tunnel { @@ -137,7 +102,20 @@ &panel { compatible = "auo,b101ean01", "simple-panel"; - power-supply= <&panel_regulator>; + + /delete-node/ panel-timing; + + panel-timing { + clock-frequency = <66666667>; + hactive = <1280>; + hfront-porch = <18>; + hback-porch = <21>; + hsync-len = <32>; + vactive = <800>; + vfront-porch = <4>; + vback-porch = <8>; + vsync-len = <18>; + }; }; &rk808 { @@ -397,12 +375,6 @@ }; &pinctrl { - backlight { - bl_pwr_en: bl_pwr_en { - rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - buck-5v { drv_5v: drv-5v { rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; @@ -425,16 +397,6 @@ }; }; - lcd { - lcd_enable_h: lcd-en { - rockchip,pins = <7 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - avdd_1v8_disp_en: avdd-1v8-disp-en { - rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - pmic { dvs_1: dvs-1 { rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>; diff --git a/arch/arm/boot/dts/rk3288-veyron-pinky.dts b/arch/arm/boot/dts/rk3288-veyron-pinky.dts index 9b6f4d9b03b6..f420499f300a 100644 --- a/arch/arm/boot/dts/rk3288-veyron-pinky.dts +++ b/arch/arm/boot/dts/rk3288-veyron-pinky.dts @@ -14,7 +14,14 @@ compatible = "google,veyron-pinky-rev2", "google,veyron-pinky", "google,veyron", "rockchip,rk3288"; + /delete-node/backlight-regulator; + /delete-node/panel-regulator; /delete-node/emmc-pwrseq; + /delete-node/vcc18-lcd; +}; + +&backlight { + /delete-property/power-supply; }; &emmc { @@ -52,7 +59,17 @@ i2c-scl-rising-time-ns = <300>; }; +&panel { + power-supply = <&vcc33_lcd>; +}; + &pinctrl { + /delete-node/ lcd; + + backlight { + /delete-node/ bl_pwr_en; + }; + buttons { pwr_key_h: pwr-key-h { rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; diff --git a/arch/arm/boot/dts/rk3288-veyron-speedy.dts b/arch/arm/boot/dts/rk3288-veyron-speedy.dts index 9b140db04456..2f2989bc3f9c 100644 --- a/arch/arm/boot/dts/rk3288-veyron-speedy.dts +++ b/arch/arm/boot/dts/rk3288-veyron-speedy.dts @@ -16,44 +16,6 @@ "google,veyron-speedy-rev5", "google,veyron-speedy-rev4", "google,veyron-speedy-rev3", "google,veyron-speedy-rev2", "google,veyron-speedy", "google,veyron", "rockchip,rk3288"; - - panel_regulator: panel-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio7 RK_PB6 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&lcd_enable_h>; - regulator-name = "panel_regulator"; - startup-delay-us = <100000>; - vin-supply = <&vcc33_sys>; - }; - - vcc18_lcd: vcc18-lcd { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&avdd_1v8_disp_en>; - regulator-name = "vcc18_lcd"; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc18_wl>; - }; - - backlight_regulator: backlight-regulator { - compatible = "regulator-fixed"; - enable-active-high; - gpio = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&bl_pwr_en>; - regulator-name = "backlight_regulator"; - vin-supply = <&vcc33_sys>; - startup-delay-us = <15000>; - }; -}; - -&backlight { - power-supply = <&backlight_regulator>; }; &cpu_alert0 { @@ -83,10 +45,6 @@ temperature = <90000>; }; -&panel { - power-supply= <&panel_regulator>; -}; - &rk808 { pinctrl-names = "default"; pinctrl-0 = <&pmic_int_l>; @@ -321,12 +279,6 @@ }; &pinctrl { - backlight { - bl_pwr_en: bl_pwr_en { - rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - buck-5v { drv_5v: drv-5v { rockchip,pins = <7 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>; @@ -339,16 +291,6 @@ }; }; - lcd { - lcd_enable_h: lcd-en { - rockchip,pins = <7 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - avdd_1v8_disp_en: avdd-1v8-disp-en { - rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - pmic { dvs_1: dvs-1 { rockchip,pins = <7 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>; diff --git a/arch/arm/boot/dts/rk3288-veyron-tiger.dts b/arch/arm/boot/dts/rk3288-veyron-tiger.dts new file mode 100644 index 000000000000..27557203ae33 --- /dev/null +++ b/arch/arm/boot/dts/rk3288-veyron-tiger.dts @@ -0,0 +1,118 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Veyron Tiger Rev 0+ board device tree source + * + * Copyright 2016 Google, Inc + */ + +/dts-v1/; +#include "rk3288-veyron-fievel.dts" +#include "rk3288-veyron-edp.dtsi" + +/ { + model = "Google Tiger"; + compatible = "google,veyron-tiger-rev8", "google,veyron-tiger-rev7", + "google,veyron-tiger-rev6", "google,veyron-tiger-rev5", + "google,veyron-tiger-rev4", "google,veyron-tiger-rev3", + "google,veyron-tiger-rev2", "google,veyron-tiger-rev1", + "google,veyron-tiger-rev0", "google,veyron-tiger", + "google,veyron", "rockchip,rk3288"; + + /delete-node/ vcc18-lcd; +}; + +&backlight { + /* Tiger panel PWM must be >= 1%, so start non-zero brightness at 3 */ + brightness-levels = < + 0 3 4 5 6 7 + 8 9 10 11 12 13 14 15 + 16 17 18 19 20 21 22 23 + 24 25 26 27 28 29 30 31 + 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 + 48 49 50 51 52 53 54 55 + 56 57 58 59 60 61 62 63 + 64 65 66 67 68 69 70 71 + 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 + 88 89 90 91 92 93 94 95 + 96 97 98 99 100 101 102 103 + 104 105 106 107 108 109 110 111 + 112 113 114 115 116 117 118 119 + 120 121 122 123 124 125 126 127 + 128 129 130 131 132 133 134 135 + 136 137 138 139 140 141 142 143 + 144 145 146 147 148 149 150 151 + 152 153 154 155 156 157 158 159 + 160 161 162 163 164 165 166 167 + 168 169 170 171 172 173 174 175 + 176 177 178 179 180 181 182 183 + 184 185 186 187 188 189 190 191 + 192 193 194 195 196 197 198 199 + 200 201 202 203 204 205 206 207 + 208 209 210 211 212 213 214 215 + 216 217 218 219 220 221 222 223 + 224 225 226 227 228 229 230 231 + 232 233 234 235 236 237 238 239 + 240 241 242 243 244 245 246 247 + 248 249 250 251 252 253 254 255>; +}; + +&backlight_regulator { + vin-supply = <&vccsys>; +}; + +&i2c3 { + status = "okay"; + + clock-frequency = <400000>; + i2c-scl-falling-time-ns = <50>; + i2c-scl-rising-time-ns = <300>; + + touchscreen@10 { + compatible = "elan,ekth3500"; + reg = <0x10>; + interrupt-parent = <&gpio2>; + interrupts = <RK_PB6 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&touch_int &touch_rst>; + reset-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_LOW>; + vcc33-supply = <&vcc33_io>; + vccio-supply = <&vcc33_io>; + wakeup-source; + }; +}; + +&panel { + compatible = "auo,b101ean01", "simple-panel"; + + /delete-node/ panel-timing; + + panel-timing { + clock-frequency = <66666667>; + hactive = <1280>; + hfront-porch = <18>; + hback-porch = <21>; + hsync-len = <32>; + vactive = <800>; + vfront-porch = <4>; + vback-porch = <8>; + vsync-len = <18>; + }; +}; + +&pinctrl { + lcd { + /delete-node/ avdd-1v8-disp-en; + }; + + touchscreen { + touch_int: touch-int { + rockchip,pins = <2 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + touch_rst: touch-rst { + rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi index 8fc8eac699bf..7525e3dd1fc1 100644 --- a/arch/arm/boot/dts/rk3288-veyron.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron.dtsi @@ -586,6 +586,10 @@ rockchip,pins = <4 RK_PD7 RK_FUNC_GPIO &pcfg_pull_down>; }; + bt_host_wake_l: bt-host-wake-l { + rockchip,pins = <4 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + /* * We run sdio0 at max speed; bump up drive strength. * We also have external pulls, so disable the internal ones. diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index ec1966480f2f..4f3993cc0227 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -85,6 +85,7 @@ clocks = <&l4_main_clk>; clock-names = "apb_pclk"; resets = <&rst DMA_RESET>; + reset-names = "dma"; }; }; @@ -747,7 +748,7 @@ nand0: nand@ff900000 { #address-cells = <0x1>; - #size-cells = <0x1>; + #size-cells = <0x0>; compatible = "altr,socfpga-denali-nand"; reg = <0xff900000 0x100000>, <0xffb80000 0x10000>; diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi index a0a6d8507265..2a86e72d9791 100644 --- a/arch/arm/boot/dts/socfpga_arria10.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10.dtsi @@ -68,6 +68,8 @@ #dma-requests = <32>; clocks = <&l4_main_clk>; clock-names = "apb_pclk"; + resets = <&rst DMA_RESET>, <&rst DMA_OCP_RESET>; + reset-names = "dma", "dma-ocp"; }; }; @@ -660,7 +662,7 @@ nand: nand@ffb90000 { #address-cells = <1>; - #size-cells = <1>; + #size-cells = <0>; compatible = "altr,socfpga-denali-nand"; reg = <0xffb90000 0x72000>, <0xffb80000 0x10000>; @@ -753,7 +755,8 @@ cdns,fifo-width = <4>; cdns,trigger-address = <0x00000000>; clocks = <&qspi_clk>; - resets = <&rst QSPI_RESET>; + resets = <&rst QSPI_RESET>, <&rst QSPI_OCP_RESET>; + reset-names = "qspi", "qspi-ocp"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts b/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts index e36e0a0f8aa6..9bd9e04c7361 100644 --- a/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts +++ b/arch/arm/boot/dts/socfpga_arria10_socdk_nand.dts @@ -9,12 +9,18 @@ &nand { status = "okay"; - partition@nand-boot { - label = "Boot and fpga data"; - reg = <0x0 0x1C00000>; - }; - partition@nand-rootfs { - label = "Root Filesystem - JFFS2"; - reg = <0x1C00000 0x6400000>; + nand@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "Boot and fpga data"; + reg = <0x0 0x1C00000>; + }; + partition@1c00000 { + label = "Root Filesystem - JFFS2"; + reg = <0x1C00000 0x6400000>; + }; }; }; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts index 355b3dbf438d..a060718758b6 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts @@ -36,21 +36,33 @@ hps_temp0 { label = "BTN_0"; /* TEMP_OS */ - gpios = <&portc 18 GPIO_ACTIVE_LOW>; /* HPS_GPIO60 */ + gpios = <&portc 18 GPIO_ACTIVE_LOW>; /* HPS_GPI5 */ linux,code = <BTN_0>; }; hps_hkey0 { - label = "BTN_1"; /* DIS_PWR */ - gpios = <&portc 19 GPIO_ACTIVE_LOW>; /* HPS_GPIO61 */ + label = "GP_SWITCH"; /* GP_SWITCH */ + gpios = <&portc 19 GPIO_ACTIVE_LOW>; /* HPS_GPI6 */ linux,code = <BTN_1>; }; hps_hkey1 { - label = "hps_hkey1"; /* POWER_DOWN */ - gpios = <&portc 20 GPIO_ACTIVE_LOW>; /* HPS_GPIO62 */ + label = "RESET_SWITCH"; /* RESET_SWITCH */ + gpios = <&portc 20 GPIO_ACTIVE_LOW>; /* HPS_GPI7 */ + linux,code = <BTN_2>; + }; + + hps_hkey2 { + label = "POWER_DOWN"; /* POWER_DOWN */ + gpios = <&portc 4 GPIO_ACTIVE_LOW>; /* HPS_GPIO62 */ linux,code = <KEY_POWER>; }; + + hps_hkey3 { + label = "SENSE"; /* SENSE */ + gpios = <&porta 9 GPIO_ACTIVE_LOW>; /* HPS_GPIO9 */ + linux,code = <BTN_3>; + }; }; regulator-usb-nrst { @@ -84,10 +96,14 @@ rxd1-skew-ps = <0>; rxd2-skew-ps = <0>; rxd3-skew-ps = <0>; + txd0-skew-ps = <0>; + txd1-skew-ps = <0>; + txd2-skew-ps = <0>; + txd3-skew-ps = <0>; txen-skew-ps = <0>; - txc-skew-ps = <2600>; + txc-skew-ps = <1860>; rxdv-skew-ps = <0>; - rxc-skew-ps = <2000>; + rxc-skew-ps = <1860>; }; }; }; diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi index b1a31134f860..90dcbc3a29c3 100644 --- a/arch/arm/boot/dts/ste-dbx5x0.dtsi +++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi @@ -92,7 +92,7 @@ }; funnel@801a6000 { - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0x801a6000 0x1000>; clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>; @@ -127,7 +127,7 @@ }; replicator { - compatible = "arm,coresight-replicator"; + compatible = "arm,coresight-static-replicator"; clocks = <&prcmu_clk PRCMU_APEATCLK>; clock-names = "atclk"; @@ -505,10 +505,30 @@ thermal@801573c0 { compatible = "stericsson,db8500-thermal"; reg = <0x801573c0 0x40>; + interrupt-parent = <&prcmu>; interrupts = <21 IRQ_TYPE_LEVEL_HIGH>, <22 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "IRQ_HOTMON_LOW", "IRQ_HOTMON_HIGH"; - status = "disabled"; + num-trips = <4>; + + trip0-temp = <70000>; + trip0-type = "active"; + trip0-cdev-num = <1>; + trip0-cdev-name0 = "thermal-cpufreq-0"; + + trip1-temp = <75000>; + trip1-type = "active"; + trip1-cdev-num = <1>; + trip1-cdev-name0 = "thermal-cpufreq-0"; + + trip2-temp = <80000>; + trip2-type = "active"; + trip2-cdev-num = <1>; + trip2-cdev-name0 = "thermal-cpufreq-0"; + + trip3-temp = <85000>; + trip3-type = "critical"; + trip3-cdev-num = <0>; }; db8500-prcmu-regulators { diff --git a/arch/arm/boot/dts/ste-href-stuib.dtsi b/arch/arm/boot/dts/ste-href-stuib.dtsi index b17998f4f7ca..e32d0c36feb8 100644 --- a/arch/arm/boot/dts/ste-href-stuib.dtsi +++ b/arch/arm/boot/dts/ste-href-stuib.dtsi @@ -38,6 +38,8 @@ interrupt-controller; vcc-supply = <&db8500_vsmps2_reg>; vio-supply = <&db8500_vsmps2_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&stmpe_stuib_mode>; wakeup-source; st,autosleep-timeout = <1024>; @@ -126,6 +128,15 @@ }; pinctrl { + /* Pull up this GPIO pin */ + stmpe { + stmpe_stuib_mode: stmpe_stuib { + stuib_cfg { + ste,pins = "GPIO218_AH11"; + ste,config = <&gpio_in_pu>; + }; + }; + }; prox { prox_stuib_mode: prox_stuib { stuib_cfg { diff --git a/arch/arm/boot/dts/ste-nomadik-nhk15.dts b/arch/arm/boot/dts/ste-nomadik-nhk15.dts index 04066f9cb8a3..41ed21a4fdc1 100644 --- a/arch/arm/boot/dts/ste-nomadik-nhk15.dts +++ b/arch/arm/boot/dts/ste-nomadik-nhk15.dts @@ -212,13 +212,7 @@ */ gpio-sck = <&gpio0 5 GPIO_ACTIVE_HIGH>; gpio-mosi = <&gpio0 4 GPIO_ACTIVE_HIGH>; - /* - * It's not actually active high, but the frameworks assume - * the polarity of the passed-in GPIO is "normal" (active - * high) then actively drives the line low to select the - * chip. - */ - cs-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; num-chipselects = <1>; /* diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index 3428290644ba..064e8abec954 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -376,40 +376,11 @@ pinctrl-0 = <&ssp0_snowball_mode>; }; - cpufreq-cooling { - status = "okay"; - }; - prcmu@80157000 { cpufreq { status = "okay"; }; - thermal@801573c0 { - num-trips = <4>; - - trip0-temp = <70000>; - trip0-type = "active"; - trip0-cdev-num = <1>; - trip0-cdev-name0 = "thermal-cpufreq-0"; - - trip1-temp = <75000>; - trip1-type = "active"; - trip1-cdev-num = <1>; - trip1-cdev-name0 = "thermal-cpufreq-0"; - - trip2-temp = <80000>; - trip2-type = "active"; - trip2-cdev-num = <1>; - trip2-cdev-name0 = "thermal-cpufreq-0"; - - trip3-temp = <85000>; - trip3-type = "critical"; - trip3-cdev-num = <0>; - - status = "okay"; - }; - ab8500 { ab8500-gpio { /* diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts index 73ea84df7bf4..ba08624c6237 100644 --- a/arch/arm/boot/dts/stm32429i-eval.dts +++ b/arch/arm/boot/dts/stm32429i-eval.dts @@ -81,18 +81,18 @@ dma-ranges = <0xc0000000 0x0 0x10000000>; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; + vdda: regulator-vdda { + compatible = "regulator-fixed"; + regulator-name = "vdda"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; - reg_vref: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "vref"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; + vref: regulator-vref { + compatible = "regulator-fixed"; + regulator-name = "vref"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; }; leds { @@ -157,7 +157,8 @@ &adc { pinctrl-names = "default"; pinctrl-0 = <&adc3_in8_pin>; - vref-supply = <®_vref>; + vdda-supply = <&vdda>; + vref-supply = <&vref>; status = "okay"; adc3: adc@200 { st,adc-channels = <8>; diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi index 4a4954492ed1..5c8a826b3195 100644 --- a/arch/arm/boot/dts/stm32f429.dtsi +++ b/arch/arm/boot/dts/stm32f429.dtsi @@ -112,6 +112,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; @@ -141,6 +142,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; @@ -170,6 +172,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; @@ -198,6 +201,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; @@ -267,6 +271,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; @@ -288,6 +293,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; }; @@ -303,6 +309,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; }; @@ -448,6 +455,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; @@ -469,6 +477,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; @@ -602,6 +611,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; @@ -623,6 +633,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; }; @@ -638,6 +649,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi index a25b7000a3a1..d26f93f8b9c2 100644 --- a/arch/arm/boot/dts/stm32f746.dtsi +++ b/arch/arm/boot/dts/stm32f746.dtsi @@ -94,6 +94,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; @@ -123,6 +124,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; @@ -152,6 +154,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; @@ -180,6 +183,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; @@ -249,6 +253,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; @@ -270,6 +275,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; }; @@ -285,6 +291,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; }; @@ -419,6 +426,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; @@ -440,6 +448,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; @@ -512,6 +521,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; @@ -533,6 +543,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; }; @@ -548,6 +559,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/stm32h743i-eval.dts b/arch/arm/boot/dts/stm32h743i-eval.dts index ab78ad532375..e4d3c58f3d97 100644 --- a/arch/arm/boot/dts/stm32h743i-eval.dts +++ b/arch/arm/boot/dts/stm32h743i-eval.dts @@ -87,6 +87,7 @@ }; &adc_12 { + vdda-supply = <&vdda>; vref-supply = <&vdda>; status = "okay"; adc1: adc@0 { diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi index df6470133574..e4a0d51ec3a8 100644 --- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi @@ -24,8 +24,6 @@ reg = <0x0 0x400>; clocks = <&rcc GPIOA>; st,bank-name = "GPIOA"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 0 16>; status = "disabled"; }; @@ -37,8 +35,6 @@ reg = <0x1000 0x400>; clocks = <&rcc GPIOB>; st,bank-name = "GPIOB"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 16 16>; status = "disabled"; }; @@ -50,8 +46,6 @@ reg = <0x2000 0x400>; clocks = <&rcc GPIOC>; st,bank-name = "GPIOC"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 32 16>; status = "disabled"; }; @@ -63,8 +57,6 @@ reg = <0x3000 0x400>; clocks = <&rcc GPIOD>; st,bank-name = "GPIOD"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 48 16>; status = "disabled"; }; @@ -76,8 +68,6 @@ reg = <0x4000 0x400>; clocks = <&rcc GPIOE>; st,bank-name = "GPIOE"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 64 16>; status = "disabled"; }; @@ -89,8 +79,6 @@ reg = <0x5000 0x400>; clocks = <&rcc GPIOF>; st,bank-name = "GPIOF"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 80 16>; status = "disabled"; }; @@ -102,8 +90,6 @@ reg = <0x6000 0x400>; clocks = <&rcc GPIOG>; st,bank-name = "GPIOG"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 96 16>; status = "disabled"; }; @@ -115,8 +101,6 @@ reg = <0x7000 0x400>; clocks = <&rcc GPIOH>; st,bank-name = "GPIOH"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 112 16>; status = "disabled"; }; @@ -128,8 +112,6 @@ reg = <0x8000 0x400>; clocks = <&rcc GPIOI>; st,bank-name = "GPIOI"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 128 16>; status = "disabled"; }; @@ -141,8 +123,6 @@ reg = <0x9000 0x400>; clocks = <&rcc GPIOJ>; st,bank-name = "GPIOJ"; - ngpios = <16>; - gpio-ranges = <&pinctrl 0 144 16>; status = "disabled"; }; @@ -154,8 +134,6 @@ reg = <0xa000 0x400>; clocks = <&rcc GPIOK>; st,bank-name = "GPIOK"; - ngpios = <8>; - gpio-ranges = <&pinctrl 0 160 8>; status = "disabled"; }; @@ -276,6 +254,50 @@ }; }; + fmc_pins_a: fmc-0 { + pins1 { + pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */ + <STM32_PINMUX('D', 5, AF12)>, /* FMC_NWE */ + <STM32_PINMUX('D', 11, AF12)>, /* FMC_A16_FMC_CLE */ + <STM32_PINMUX('D', 12, AF12)>, /* FMC_A17_FMC_ALE */ + <STM32_PINMUX('D', 14, AF12)>, /* FMC_D0 */ + <STM32_PINMUX('D', 15, AF12)>, /* FMC_D1 */ + <STM32_PINMUX('D', 0, AF12)>, /* FMC_D2 */ + <STM32_PINMUX('D', 1, AF12)>, /* FMC_D3 */ + <STM32_PINMUX('E', 7, AF12)>, /* FMC_D4 */ + <STM32_PINMUX('E', 8, AF12)>, /* FMC_D5 */ + <STM32_PINMUX('E', 9, AF12)>, /* FMC_D6 */ + <STM32_PINMUX('E', 10, AF12)>, /* FMC_D7 */ + <STM32_PINMUX('G', 9, AF12)>; /* FMC_NE2_FMC_NCE */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + pins2 { + pinmux = <STM32_PINMUX('D', 6, AF12)>; /* FMC_NWAIT */ + bias-pull-up; + }; + }; + + fmc_sleep_pins_a: fmc-sleep-0 { + pins { + pinmux = <STM32_PINMUX('D', 4, ANALOG)>, /* FMC_NOE */ + <STM32_PINMUX('D', 5, ANALOG)>, /* FMC_NWE */ + <STM32_PINMUX('D', 11, ANALOG)>, /* FMC_A16_FMC_CLE */ + <STM32_PINMUX('D', 12, ANALOG)>, /* FMC_A17_FMC_ALE */ + <STM32_PINMUX('D', 14, ANALOG)>, /* FMC_D0 */ + <STM32_PINMUX('D', 15, ANALOG)>, /* FMC_D1 */ + <STM32_PINMUX('D', 0, ANALOG)>, /* FMC_D2 */ + <STM32_PINMUX('D', 1, ANALOG)>, /* FMC_D3 */ + <STM32_PINMUX('E', 7, ANALOG)>, /* FMC_D4 */ + <STM32_PINMUX('E', 8, ANALOG)>, /* FMC_D5 */ + <STM32_PINMUX('E', 9, ANALOG)>, /* FMC_D6 */ + <STM32_PINMUX('E', 10, ANALOG)>, /* FMC_D7 */ + <STM32_PINMUX('D', 6, ANALOG)>, /* FMC_NWAIT */ + <STM32_PINMUX('G', 9, ANALOG)>; /* FMC_NE2_FMC_NCE */ + }; + }; + i2c1_pins_a: i2c1-0 { pins { pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */ @@ -530,7 +552,7 @@ }; }; - m_can1_sleep_pins_a: m_can1-sleep@0 { + m_can1_sleep_pins_a: m_can1-sleep-0 { pins { pinmux = <STM32_PINMUX('H', 13, ANALOG)>, /* CAN1_TX */ <STM32_PINMUX('I', 9, ANALOG)>; /* CAN1_RX */ @@ -849,8 +871,6 @@ clocks = <&rcc GPIOZ>; st,bank-name = "GPIOZ"; st,bank-ioport = <11>; - ngpios = <8>; - gpio-ranges = <&pinctrl_z 0 400 8>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/stm32mp157a-dk1.dts b/arch/arm/boot/dts/stm32mp157a-dk1.dts index f3f0e37aad4d..0615d1c8a6fc 100644 --- a/arch/arm/boot/dts/stm32mp157a-dk1.dts +++ b/arch/arm/boot/dts/stm32mp157a-dk1.dts @@ -33,6 +33,42 @@ #size-cells = <1>; ranges; + mcuram2: mcuram2@10000000 { + compatible = "shared-dma-pool"; + reg = <0x10000000 0x40000>; + no-map; + }; + + vdev0vring0: vdev0vring0@10040000 { + compatible = "shared-dma-pool"; + reg = <0x10040000 0x1000>; + no-map; + }; + + vdev0vring1: vdev0vring1@10041000 { + compatible = "shared-dma-pool"; + reg = <0x10041000 0x1000>; + no-map; + }; + + vdev0buffer: vdev0buffer@10042000 { + compatible = "shared-dma-pool"; + reg = <0x10042000 0x4000>; + no-map; + }; + + mcuram: mcuram@30000000 { + compatible = "shared-dma-pool"; + reg = <0x30000000 0x40000>; + no-map; + }; + + retram: retram@38000000 { + compatible = "shared-dma-pool"; + reg = <0x38000000 0x10000>; + no-map; + }; + gpu_reserved: gpu@d4000000 { reg = <0xd4000000 0x4000000>; no-map; @@ -48,6 +84,17 @@ default-state = "off"; }; }; + + sound { + compatible = "audio-graph-card"; + label = "STM32MP1-DK"; + routing = + "Playback" , "MCLK", + "Capture" , "MCLK", + "MICL" , "Mic Bias"; + dais = <&sai2a_port &sai2b_port>; + status = "okay"; + }; }; &cec { @@ -116,6 +163,39 @@ }; }; }; + + cs42l51: cs42l51@4a { + compatible = "cirrus,cs42l51"; + reg = <0x4a>; + #sound-dai-cells = <0>; + VL-supply = <&v3v3>; + VD-supply = <&v1v8_audio>; + VA-supply = <&v1v8_audio>; + VAHP-supply = <&v1v8_audio>; + reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>; + clocks = <&sai2a>; + clock-names = "MCLK"; + status = "okay"; + + cs42l51_port: port { + #address-cells = <1>; + #size-cells = <0>; + + cs42l51_tx_endpoint: endpoint@0 { + reg = <0>; + remote-endpoint = <&sai2a_endpoint>; + frame-master; + bitclock-master; + }; + + cs42l51_rx_endpoint: endpoint@1 { + reg = <1>; + remote-endpoint = <&sai2b_endpoint>; + frame-master; + bitclock-master; + }; + }; + }; }; &i2c4 { @@ -289,6 +369,16 @@ }; }; +&m4_rproc { + memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>, + <&vdev0vring1>, <&vdev0buffer>; + mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>; + mbox-names = "vq0", "vq1", "shutdown"; + interrupt-parent = <&exti>; + interrupts = <68 1>; + status = "okay"; +}; + &rng1 { status = "okay"; }; @@ -297,6 +387,51 @@ status = "okay"; }; +&sai2 { + clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>; + clock-names = "pclk", "x8k", "x11k"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sai2a_pins_a>, <&sai2b_pins_b>; + pinctrl-1 = <&sai2a_sleep_pins_a>, <&sai2b_sleep_pins_b>; + status = "okay"; + + sai2a: audio-controller@4400b004 { + #clock-cells = <0>; + dma-names = "tx"; + clocks = <&rcc SAI2_K>; + clock-names = "sai_ck"; + status = "okay"; + + sai2a_port: port { + sai2a_endpoint: endpoint { + remote-endpoint = <&cs42l51_tx_endpoint>; + format = "i2s"; + mclk-fs = <256>; + dai-tdm-slot-num = <2>; + dai-tdm-slot-width = <32>; + }; + }; + }; + + sai2b: audio-controller@4400b024 { + dma-names = "rx"; + st,sync = <&sai2a 2>; + clocks = <&rcc SAI2_K>, <&sai2a>; + clock-names = "sai_ck", "MCLK"; + status = "okay"; + + sai2b_port: port { + sai2b_endpoint: endpoint { + remote-endpoint = <&cs42l51_rx_endpoint>; + format = "i2s"; + mclk-fs = <256>; + dai-tdm-slot-num = <2>; + dai-tdm-slot-width = <32>; + }; + }; + }; +}; + &sdmmc1 { pinctrl-names = "default", "opendrain", "sleep"; pinctrl-0 = <&sdmmc1_b4_pins_a>; diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts index 4fe7f71a74d3..1d426ea8bdaf 100644 --- a/arch/arm/boot/dts/stm32mp157c-ed1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts @@ -28,6 +28,42 @@ #size-cells = <1>; ranges; + mcuram2: mcuram2@10000000 { + compatible = "shared-dma-pool"; + reg = <0x10000000 0x40000>; + no-map; + }; + + vdev0vring0: vdev0vring0@10040000 { + compatible = "shared-dma-pool"; + reg = <0x10040000 0x1000>; + no-map; + }; + + vdev0vring1: vdev0vring1@10041000 { + compatible = "shared-dma-pool"; + reg = <0x10041000 0x1000>; + no-map; + }; + + vdev0buffer: vdev0buffer@10042000 { + compatible = "shared-dma-pool"; + reg = <0x10042000 0x4000>; + no-map; + }; + + mcuram: mcuram@30000000 { + compatible = "shared-dma-pool"; + reg = <0x30000000 0x40000>; + no-map; + }; + + retram: retram@38000000 { + compatible = "shared-dma-pool"; + reg = <0x38000000 0x10000>; + no-map; + }; + gpu_reserved: gpu@e8000000 { reg = <0xe8000000 0x8000000>; no-map; @@ -233,6 +269,16 @@ status = "okay"; }; +&m4_rproc { + memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>, + <&vdev0vring1>, <&vdev0buffer>; + mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>; + mbox-names = "vq0", "vq1", "shutdown"; + interrupt-parent = <&exti>; + interrupts = <68 1>; + status = "okay"; +}; + &rng1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts index feb8f7727270..89d29b50c3f4 100644 --- a/arch/arm/boot/dts/stm32mp157c-ev1.dts +++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts @@ -101,6 +101,7 @@ &dsi { #address-cells = <1>; #size-cells = <0>; + phy-dsi-supply = <®18>; status = "okay"; ports { @@ -157,6 +158,22 @@ }; }; +&fmc { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&fmc_pins_a>; + pinctrl-1 = <&fmc_sleep_pins_a>; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + nand@0 { + reg = <0>; + nand-on-flash-bbt; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + &i2c2 { pinctrl-names = "default"; pinctrl-0 = <&i2c2_pins_a>; diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi index 0c4e6ebc3529..9b11654a0a39 100644 --- a/arch/arm/boot/dts/stm32mp157c.dtsi +++ b/arch/arm/boot/dts/stm32mp157c.dtsi @@ -109,6 +109,12 @@ }; }; + booster: regulator-booster { + compatible = "st,stm32mp1-booster"; + st,syscfg = <&syscfg>; + status = "disabled"; + }; + soc { compatible = "simple-bus"; #address-cells = <1>; @@ -133,6 +139,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; @@ -161,6 +168,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; @@ -187,6 +195,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; @@ -215,6 +224,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; @@ -272,6 +282,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; @@ -293,6 +304,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; @@ -314,6 +326,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; @@ -567,6 +580,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; @@ -597,6 +611,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; @@ -670,6 +685,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; @@ -694,6 +710,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; timer@15 { @@ -717,6 +734,7 @@ pwm { compatible = "st,stm32-pwm"; + #pwm-cells = <3>; status = "disabled"; }; @@ -983,6 +1001,7 @@ clocks = <&rcc ADC12>, <&rcc ADC12_K>; clock-names = "bus", "adc"; interrupt-controller; + st,syscfg = <&syscfg>; #interrupt-cells = <1>; #address-cells = <1>; #size-cells = <0>; @@ -1239,11 +1258,33 @@ dma-requests = <48>; }; + fmc: nand-controller@58002000 { + compatible = "st,stm32mp15-fmc2"; + reg = <0x58002000 0x1000>, + <0x80000000 0x1000>, + <0x88010000 0x1000>, + <0x88020000 0x1000>, + <0x81000000 0x1000>, + <0x89010000 0x1000>, + <0x89020000 0x1000>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&mdma1 20 0x10 0x12000a02 0x0 0x0>, + <&mdma1 20 0x10 0x12000a08 0x0 0x0>, + <&mdma1 21 0x10 0x12000a0a 0x0 0x0>; + dma-names = "tx", "rx", "ecc"; + clocks = <&rcc FMC_K>; + resets = <&rcc FMC_R>; + status = "disabled"; + }; + qspi: spi@58003000 { compatible = "st,stm32f469-qspi"; reg = <0x58003000 0x1000>, <0x70000000 0x10000000>; reg-names = "qspi", "qspi_mm"; interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&mdma1 22 0x10 0x100002 0x0 0x0>, + <&mdma1 22 0x10 0x100008 0x0 0x0>; + dma-names = "tx", "rx"; clocks = <&rcc QSPI_K>; resets = <&rcc QSPI_R>; status = "disabled"; @@ -1448,4 +1489,24 @@ status = "disabled"; }; }; + + mlahb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + dma-ranges = <0x00000000 0x38000000 0x10000>, + <0x10000000 0x10000000 0x60000>, + <0x30000000 0x30000000 0x60000>; + + m4_rproc: m4@10000000 { + compatible = "st,stm32mp1-m4"; + reg = <0x10000000 0x40000>, + <0x30000000 0x40000>, + <0x38000000 0x10000>; + resets = <&rcc MCU_R>; + st,syscfg-holdboot = <&rcc 0x10C 0x1>; + st,syscfg-tz = <&rcc 0x000 0x1>; + status = "disabled"; + }; + }; }; diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi index d6a1fc269241..dfae90adbb7c 100644 --- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * ARM Ltd. Versatile Express * diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi index 8e57e15307e2..2e29d7790497 100644 --- a/arch/arm/boot/dts/vexpress-v2m.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m.dtsi @@ -451,4 +451,4 @@ }; }; }; -};
\ No newline at end of file +}; diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index e6b98b6eb88d..822cddfbf1af 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -4,17 +4,9 @@ CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y CONFIG_BLK_DEV_INITRD=y CONFIG_KALLSYMS_ALL=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_PARTITION_ADVANCED=y CONFIG_ARCH_U8500=y -CONFIG_MACH_HREFV60=y -CONFIG_MACH_SNOWBALL=y CONFIG_SMP=y CONFIG_NR_CPUS=2 -CONFIG_PREEMPT=y -CONFIG_AEABI=y CONFIG_HIGHMEM=y CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y @@ -25,6 +17,11 @@ CONFIG_CPU_IDLE=y CONFIG_ARM_U8500_CPUIDLE=y CONFIG_VFP=y CONFIG_NEON=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_CMA=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -47,7 +44,6 @@ CONFIG_SMSC911X=y CONFIG_SMSC_PHY=y CONFIG_CW1200=y CONFIG_CW1200_WLAN_SDIO=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set CONFIG_KEYBOARD_GPIO=y @@ -63,7 +59,6 @@ CONFIG_RMI4_CORE=y CONFIG_RMI4_I2C=y CONFIG_RMI4_F11=y # CONFIG_SERIO is not set -CONFIG_VT_HW_CONSOLE_BINDING=y # CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y @@ -72,6 +67,7 @@ CONFIG_SPI=y CONFIG_SPI_PL022=y CONFIG_GPIO_STMPE=y CONFIG_GPIO_TC3589X=y +CONFIG_SENSORS_IIO_HWMON=y CONFIG_THERMAL=y CONFIG_CPU_THERMAL=y CONFIG_WATCHDOG=y @@ -79,6 +75,13 @@ CONFIG_MFD_STMPE=y CONFIG_MFD_TC3589X=y CONFIG_REGULATOR_AB8500=y CONFIG_REGULATOR_GPIO=y +CONFIG_DRM=y +CONFIG_DRM_PANEL_SAMSUNG_S6D16D0=y +CONFIG_DRM_LIMA=y +CONFIG_DRM_MCDE=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_GENERIC=m +CONFIG_LOGO=y CONFIG_SOUND=y CONFIG_SND=y CONFIG_SND_SOC=y @@ -87,6 +90,7 @@ CONFIG_SND_SOC_UX500_MACH_MOP500=y CONFIG_USB=y CONFIG_USB_MUSB_HDRC=y CONFIG_USB_MUSB_UX500=y +CONFIG_MUSB_PIO_ONLY=y CONFIG_AB8500_USB=y CONFIG_USB_GADGET=y CONFIG_USB_ETH=m @@ -103,6 +107,7 @@ CONFIG_RTC_DRV_AB8500=y CONFIG_RTC_DRV_PL031=y CONFIG_DMADEVICES=y CONFIG_STE_DMA40=y +CONFIG_HWSPINLOCK=y CONFIG_HSEM_U8500=y CONFIG_IIO=y CONFIG_IIO_SW_TRIGGER=y @@ -126,20 +131,19 @@ CONFIG_NFS_FS=y CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y +CONFIG_CRYPTO_DEV_UX500=y +CONFIG_CRYPTO_DEV_UX500_CRYP=y +CONFIG_CRYPTO_DEV_UX500_HASH=y +CONFIG_CRYPTO_DEV_UX500_DEBUG=y CONFIG_PRINTK_TIME=y CONFIG_DEBUG_INFO=y CONFIG_DEBUG_FS=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y # CONFIG_SCHED_DEBUG is not set -# CONFIG_DEBUG_PREEMPT is not set # CONFIG_FTRACE is not set CONFIG_DEBUG_USER=y CONFIG_CORESIGHT=y CONFIG_CORESIGHT_SINK_TPIU=y CONFIG_CORESIGHT_SINK_ETBV10=y CONFIG_CORESIGHT_SOURCE_ETM3X=y -CONFIG_CRYPTO_DEV_UX500=y -CONFIG_CRYPTO_DEV_UX500_CRYP=y -CONFIG_CRYPTO_DEV_UX500_HASH=y -CONFIG_CRYPTO_DEV_UX500_DEBUG=y diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h index 7e0486ad1318..dba9355e2484 100644 --- a/arch/arm/include/asm/dma-mapping.h +++ b/arch/arm/include/asm/dma-mapping.h @@ -18,7 +18,9 @@ extern const struct dma_map_ops arm_coherent_dma_ops; static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus) { - return IS_ENABLED(CONFIG_MMU) ? &arm_dma_ops : NULL; + if (IS_ENABLED(CONFIG_MMU) && !IS_ENABLED(CONFIG_ARM_LPAE)) + return &arm_dma_ops; + return NULL; } #ifdef __arch_page_to_dma diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index af8b8e15f589..b0c195e3a06d 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -544,6 +544,7 @@ static int arch_build_bp_info(struct perf_event *bp, if ((hw->ctrl.type != ARM_BREAKPOINT_EXECUTE) && max_watchpoint_len >= 8) break; + /* Else, fall through */ default: return -EINVAL; } @@ -608,10 +609,12 @@ int hw_breakpoint_arch_parse(struct perf_event *bp, /* Allow halfword watchpoints and breakpoints. */ if (hw->ctrl.len == ARM_BREAKPOINT_LEN_2) break; + /* Else, fall through */ case 3: /* Allow single byte watchpoint. */ if (hw->ctrl.len == ARM_BREAKPOINT_LEN_1) break; + /* Else, fall through */ default: ret = -EINVAL; goto out; @@ -861,6 +864,7 @@ static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr, break; case ARM_ENTRY_ASYNC_WATCHPOINT: WARN(1, "Asynchronous watchpoint exception taken. Debugging results may be unreliable\n"); + /* Fall through */ case ARM_ENTRY_SYNC_WATCHPOINT: watchpoint_handler(addr, fsr, regs); break; @@ -909,6 +913,7 @@ static bool core_has_os_save_restore(void) ARM_DBG_READ(c1, c1, 4, oslsr); if (oslsr & ARM_OSLSR_OSLM0) return true; + /* Else, fall through */ default: return false; } diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index 09f6fdd41974..ab2568996ddb 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -596,6 +596,7 @@ static int do_signal(struct pt_regs *regs, int syscall) switch (retval) { case -ERESTART_RESTARTBLOCK: restart -= 2; + /* Fall through */ case -ERESTARTNOHAND: case -ERESTARTSYS: case -ERESTARTNOINTR: diff --git a/arch/arm/kvm/coproc.c b/arch/arm/kvm/coproc.c index d2806bcff8bb..07745ee022a1 100644 --- a/arch/arm/kvm/coproc.c +++ b/arch/arm/kvm/coproc.c @@ -651,13 +651,22 @@ int kvm_handle_cp14_64(struct kvm_vcpu *vcpu, struct kvm_run *run) } static void reset_coproc_regs(struct kvm_vcpu *vcpu, - const struct coproc_reg *table, size_t num) + const struct coproc_reg *table, size_t num, + unsigned long *bmap) { unsigned long i; for (i = 0; i < num; i++) - if (table[i].reset) + if (table[i].reset) { + int reg = table[i].reg; + table[i].reset(vcpu, &table[i]); + if (reg > 0 && reg < NR_CP15_REGS) { + set_bit(reg, bmap); + if (table[i].is_64bit) + set_bit(reg + 1, bmap); + } + } } static struct coproc_params decode_32bit_hsr(struct kvm_vcpu *vcpu) @@ -1432,17 +1441,15 @@ void kvm_reset_coprocs(struct kvm_vcpu *vcpu) { size_t num; const struct coproc_reg *table; - - /* Catch someone adding a register without putting in reset entry. */ - memset(vcpu->arch.ctxt.cp15, 0x42, sizeof(vcpu->arch.ctxt.cp15)); + DECLARE_BITMAP(bmap, NR_CP15_REGS) = { 0, }; /* Generic chip reset first (so target could override). */ - reset_coproc_regs(vcpu, cp15_regs, ARRAY_SIZE(cp15_regs)); + reset_coproc_regs(vcpu, cp15_regs, ARRAY_SIZE(cp15_regs), bmap); table = get_target_table(vcpu->arch.target, &num); - reset_coproc_regs(vcpu, table, num); + reset_coproc_regs(vcpu, table, num, bmap); for (num = 1; num < NR_CP15_REGS; num++) - WARN(vcpu_cp15(vcpu, num) == 0x42424242, + WARN(!test_bit(num, bmap), "Didn't reset vcpu_cp15(vcpu, %zi)", num); } diff --git a/arch/arm/mach-davinci/sleep.S b/arch/arm/mach-davinci/sleep.S index 05d03f09ff54..71262dcdbca3 100644 --- a/arch/arm/mach-davinci/sleep.S +++ b/arch/arm/mach-davinci/sleep.S @@ -24,6 +24,7 @@ #define DEEPSLEEP_SLEEPENABLE_BIT BIT(31) .text + .arch armv5te /* * Move DaVinci into deep sleep state * diff --git a/arch/arm/mach-ep93xx/crunch.c b/arch/arm/mach-ep93xx/crunch.c index 1c9a4be8b503..1c05c5bf7e5c 100644 --- a/arch/arm/mach-ep93xx/crunch.c +++ b/arch/arm/mach-ep93xx/crunch.c @@ -49,6 +49,7 @@ static int crunch_do(struct notifier_block *self, unsigned long cmd, void *t) * FALLTHROUGH: Ensure we don't try to overwrite our newly * initialised state information on the first fault. */ + /* Fall through */ case THREAD_NOTIFY_EXIT: crunch_task_release(thread); diff --git a/arch/arm/mach-netx/Kconfig b/arch/arm/mach-netx/Kconfig deleted file mode 100644 index 1e5d9c870784..000000000000 --- a/arch/arm/mach-netx/Kconfig +++ /dev/null @@ -1,22 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -menu "NetX Implementations" - depends on ARCH_NETX - -config MACH_NXDKN - bool "Enable Hilscher nxdkn Eval Board support" - help - Board support for the Hilscher NetX Eval Board - -config MACH_NXDB500 - bool "Enable Hilscher nxdb500 Eval Board support" - select ARM_AMBA - help - Board support for the Hilscher nxdb500 Eval Board - -config MACH_NXEB500HMI - bool "Enable Hilscher nxeb500hmi Eval Board support" - select ARM_AMBA - help - Board support for the Hilscher nxeb500hmi Eval Board - -endmenu diff --git a/arch/arm/mach-netx/Makefile b/arch/arm/mach-netx/Makefile deleted file mode 100644 index 44ea83f7d9c2..000000000000 --- a/arch/arm/mach-netx/Makefile +++ /dev/null @@ -1,13 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -# -# Makefile for the linux kernel. -# - -# Object file lists. - -obj-y += time.o generic.o pfifo.o xc.o - -# Specific board support -obj-$(CONFIG_MACH_NXDKN) += nxdkn.o -obj-$(CONFIG_MACH_NXDB500) += nxdb500.o fb.o -obj-$(CONFIG_MACH_NXEB500HMI) += nxeb500hmi.o fb.o diff --git a/arch/arm/mach-netx/Makefile.boot b/arch/arm/mach-netx/Makefile.boot deleted file mode 100644 index 2eb23c0cb6b0..000000000000 --- a/arch/arm/mach-netx/Makefile.boot +++ /dev/null @@ -1,3 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only - zreladdr-y += 0x80008000 - diff --git a/arch/arm/mach-netx/fb.c b/arch/arm/mach-netx/fb.c deleted file mode 100644 index 2dc80db07390..000000000000 --- a/arch/arm/mach-netx/fb.c +++ /dev/null @@ -1,65 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * arch/arm/mach-netx/fb.c - * - * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix - */ - -#include <linux/device.h> -#include <linux/init.h> -#include <linux/dma-mapping.h> -#include <linux/amba/bus.h> -#include <linux/amba/clcd.h> -#include <linux/err.h> -#include <linux/gfp.h> - -#include <asm/irq.h> - -#include <mach/netx-regs.h> -#include <mach/hardware.h> - -static struct clcd_panel *netx_panel; - -void netx_clcd_enable(struct clcd_fb *fb) -{ -} - -int netx_clcd_setup(struct clcd_fb *fb) -{ - dma_addr_t dma; - - fb->panel = netx_panel; - - fb->fb.screen_base = dma_alloc_wc(&fb->dev->dev, 1024 * 1024, &dma, - GFP_KERNEL); - if (!fb->fb.screen_base) { - printk(KERN_ERR "CLCD: unable to map framebuffer\n"); - return -ENOMEM; - } - - fb->fb.fix.smem_start = dma; - fb->fb.fix.smem_len = 1024*1024; - - return 0; -} - -int netx_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma) -{ - return dma_mmap_wc(&fb->dev->dev, vma, fb->fb.screen_base, - fb->fb.fix.smem_start, fb->fb.fix.smem_len); -} - -void netx_clcd_remove(struct clcd_fb *fb) -{ - dma_free_wc(&fb->dev->dev, fb->fb.fix.smem_len, fb->fb.screen_base, - fb->fb.fix.smem_start); -} - -static AMBA_AHB_DEVICE(fb, "fb", 0, 0x00104000, { NETX_IRQ_LCD }, NULL); - -int netx_fb_init(struct clcd_board *board, struct clcd_panel *panel) -{ - netx_panel = panel; - fb_device.dev.platform_data = board; - return amba_device_register(&fb_device, &iomem_resource); -} diff --git a/arch/arm/mach-netx/fb.h b/arch/arm/mach-netx/fb.h deleted file mode 100644 index 5cdc01fc3c86..000000000000 --- a/arch/arm/mach-netx/fb.h +++ /dev/null @@ -1,12 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * arch/arm/mach-netx/fb.h - * - * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix - */ - -void netx_clcd_enable(struct clcd_fb *fb); -int netx_clcd_setup(struct clcd_fb *fb); -int netx_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma); -void netx_clcd_remove(struct clcd_fb *fb); -int netx_fb_init(struct clcd_board *board, struct clcd_panel *panel); diff --git a/arch/arm/mach-netx/generic.c b/arch/arm/mach-netx/generic.c deleted file mode 100644 index 88881fd45e9f..000000000000 --- a/arch/arm/mach-netx/generic.c +++ /dev/null @@ -1,182 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * arch/arm/mach-netx/generic.c - * - * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix - */ - -#include <linux/device.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/irqchip/arm-vic.h> -#include <linux/reboot.h> -#include <mach/hardware.h> -#include <asm/mach/map.h> -#include <mach/netx-regs.h> -#include <asm/mach/irq.h> - -static struct map_desc netx_io_desc[] __initdata = { - { - .virtual = NETX_IO_VIRT, - .pfn = __phys_to_pfn(NETX_IO_PHYS), - .length = NETX_IO_SIZE, - .type = MT_DEVICE - } -}; - -void __init netx_map_io(void) -{ - iotable_init(netx_io_desc, ARRAY_SIZE(netx_io_desc)); -} - -static struct resource netx_rtc_resources[] = { - [0] = { - .start = 0x00101200, - .end = 0x00101220, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device netx_rtc_device = { - .name = "netx-rtc", - .id = 0, - .num_resources = ARRAY_SIZE(netx_rtc_resources), - .resource = netx_rtc_resources, -}; - -static struct platform_device *devices[] __initdata = { - &netx_rtc_device, -}; - -#if 0 -#define DEBUG_IRQ(fmt...) printk(fmt) -#else -#define DEBUG_IRQ(fmt...) while (0) {} -#endif - -static void netx_hif_demux_handler(struct irq_desc *desc) -{ - unsigned int irq = NETX_IRQ_HIF_CHAINED(0); - unsigned int stat; - - stat = ((readl(NETX_DPMAS_INT_EN) & - readl(NETX_DPMAS_INT_STAT)) >> 24) & 0x1f; - - while (stat) { - if (stat & 1) { - DEBUG_IRQ("handling irq %d\n", irq); - generic_handle_irq(irq); - } - irq++; - stat >>= 1; - } -} - -static int -netx_hif_irq_type(struct irq_data *d, unsigned int type) -{ - unsigned int val, irq; - - val = readl(NETX_DPMAS_IF_CONF1); - - irq = d->irq - NETX_IRQ_HIF_CHAINED(0); - - if (type & IRQ_TYPE_EDGE_RISING) { - DEBUG_IRQ("rising edges\n"); - val |= (1 << 26) << irq; - } - if (type & IRQ_TYPE_EDGE_FALLING) { - DEBUG_IRQ("falling edges\n"); - val &= ~((1 << 26) << irq); - } - if (type & IRQ_TYPE_LEVEL_LOW) { - DEBUG_IRQ("low level\n"); - val &= ~((1 << 26) << irq); - } - if (type & IRQ_TYPE_LEVEL_HIGH) { - DEBUG_IRQ("high level\n"); - val |= (1 << 26) << irq; - } - - writel(val, NETX_DPMAS_IF_CONF1); - - return 0; -} - -static void -netx_hif_ack_irq(struct irq_data *d) -{ - unsigned int val, irq; - - irq = d->irq - NETX_IRQ_HIF_CHAINED(0); - writel((1 << 24) << irq, NETX_DPMAS_INT_STAT); - - val = readl(NETX_DPMAS_INT_EN); - val &= ~((1 << 24) << irq); - writel(val, NETX_DPMAS_INT_EN); - - DEBUG_IRQ("%s: irq %d\n", __func__, d->irq); -} - -static void -netx_hif_mask_irq(struct irq_data *d) -{ - unsigned int val, irq; - - irq = d->irq - NETX_IRQ_HIF_CHAINED(0); - val = readl(NETX_DPMAS_INT_EN); - val &= ~((1 << 24) << irq); - writel(val, NETX_DPMAS_INT_EN); - DEBUG_IRQ("%s: irq %d\n", __func__, d->irq); -} - -static void -netx_hif_unmask_irq(struct irq_data *d) -{ - unsigned int val, irq; - - irq = d->irq - NETX_IRQ_HIF_CHAINED(0); - val = readl(NETX_DPMAS_INT_EN); - val |= (1 << 24) << irq; - writel(val, NETX_DPMAS_INT_EN); - DEBUG_IRQ("%s: irq %d\n", __func__, d->irq); -} - -static struct irq_chip netx_hif_chip = { - .irq_ack = netx_hif_ack_irq, - .irq_mask = netx_hif_mask_irq, - .irq_unmask = netx_hif_unmask_irq, - .irq_set_type = netx_hif_irq_type, -}; - -void __init netx_init_irq(void) -{ - int irq; - - vic_init(io_p2v(NETX_PA_VIC), NETX_IRQ_VIC_START, ~0, 0); - - for (irq = NETX_IRQ_HIF_CHAINED(0); irq <= NETX_IRQ_HIF_LAST; irq++) { - irq_set_chip_and_handler(irq, &netx_hif_chip, - handle_level_irq); - irq_clear_status_flags(irq, IRQ_NOREQUEST); - } - - writel(NETX_DPMAS_INT_EN_GLB_EN, NETX_DPMAS_INT_EN); - irq_set_chained_handler(NETX_IRQ_HIF, netx_hif_demux_handler); -} - -static int __init netx_init(void) -{ - return platform_add_devices(devices, ARRAY_SIZE(devices)); -} - -subsys_initcall(netx_init); - -void netx_restart(enum reboot_mode mode, const char *cmd) -{ - writel(NETX_SYSTEM_RES_CR_FIRMW_RES_EN | NETX_SYSTEM_RES_CR_FIRMW_RES, - NETX_SYSTEM_RES_CR); -} diff --git a/arch/arm/mach-netx/generic.h b/arch/arm/mach-netx/generic.h deleted file mode 100644 index 223e304574a5..000000000000 --- a/arch/arm/mach-netx/generic.h +++ /dev/null @@ -1,14 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * arch/arm/mach-netx/generic.h - * - * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix - */ - -#include <linux/reboot.h> - -extern void __init netx_map_io(void); -extern void __init netx_init_irq(void); -extern void netx_restart(enum reboot_mode, const char *); - -extern void netx_timer_init(void); diff --git a/arch/arm/mach-netx/include/mach/hardware.h b/arch/arm/mach-netx/include/mach/hardware.h deleted file mode 100644 index 84253993d1e0..000000000000 --- a/arch/arm/mach-netx/include/mach/hardware.h +++ /dev/null @@ -1,27 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * arch/arm/mach-netx/include/mach/hardware.h - * - * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix - */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#define NETX_IO_PHYS 0x00100000 -#define NETX_IO_VIRT 0xe0000000 -#define NETX_IO_SIZE 0x00100000 - -#define SRAM_INTERNAL_PHYS_0 0x00000 -#define SRAM_INTERNAL_PHYS_1 0x08000 -#define SRAM_INTERNAL_PHYS_2 0x10000 -#define SRAM_INTERNAL_PHYS_3 0x18000 -#define SRAM_INTERNAL_PHYS(no) ((no) * 0x8000) - -#define XPEC_MEM_SIZE 0x4000 -#define XMAC_MEM_SIZE 0x1000 -#define SRAM_MEM_SIZE 0x8000 - -#define io_p2v(x) IOMEM((x) - NETX_IO_PHYS + NETX_IO_VIRT) -#define io_v2p(x) ((x) - NETX_IO_VIRT + NETX_IO_PHYS) - -#endif diff --git a/arch/arm/mach-netx/include/mach/irqs.h b/arch/arm/mach-netx/include/mach/irqs.h deleted file mode 100644 index 540c92104fe8..000000000000 --- a/arch/arm/mach-netx/include/mach/irqs.h +++ /dev/null @@ -1,58 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * arch/arm/mach-netx/include/mach/irqs.h - * - * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix - */ - -#define NETX_IRQ_VIC_START 64 -#define NETX_IRQ_SOFTINT (NETX_IRQ_VIC_START + 0) -#define NETX_IRQ_TIMER0 (NETX_IRQ_VIC_START + 1) -#define NETX_IRQ_TIMER1 (NETX_IRQ_VIC_START + 2) -#define NETX_IRQ_TIMER2 (NETX_IRQ_VIC_START + 3) -#define NETX_IRQ_SYSTIME_NS (NETX_IRQ_VIC_START + 4) -#define NETX_IRQ_SYSTIME_S (NETX_IRQ_VIC_START + 5) -#define NETX_IRQ_GPIO_15 (NETX_IRQ_VIC_START + 6) -#define NETX_IRQ_WATCHDOG (NETX_IRQ_VIC_START + 7) -#define NETX_IRQ_UART0 (NETX_IRQ_VIC_START + 8) -#define NETX_IRQ_UART1 (NETX_IRQ_VIC_START + 9) -#define NETX_IRQ_UART2 (NETX_IRQ_VIC_START + 10) -#define NETX_IRQ_USB (NETX_IRQ_VIC_START + 11) -#define NETX_IRQ_SPI (NETX_IRQ_VIC_START + 12) -#define NETX_IRQ_I2C (NETX_IRQ_VIC_START + 13) -#define NETX_IRQ_LCD (NETX_IRQ_VIC_START + 14) -#define NETX_IRQ_HIF (NETX_IRQ_VIC_START + 15) -#define NETX_IRQ_GPIO_0_14 (NETX_IRQ_VIC_START + 16) -#define NETX_IRQ_XPEC0 (NETX_IRQ_VIC_START + 17) -#define NETX_IRQ_XPEC1 (NETX_IRQ_VIC_START + 18) -#define NETX_IRQ_XPEC2 (NETX_IRQ_VIC_START + 19) -#define NETX_IRQ_XPEC3 (NETX_IRQ_VIC_START + 20) -#define NETX_IRQ_XPEC(no) (NETX_IRQ_VIC_START + 17 + (no)) -#define NETX_IRQ_MSYNC0 (NETX_IRQ_VIC_START + 21) -#define NETX_IRQ_MSYNC1 (NETX_IRQ_VIC_START + 22) -#define NETX_IRQ_MSYNC2 (NETX_IRQ_VIC_START + 23) -#define NETX_IRQ_MSYNC3 (NETX_IRQ_VIC_START + 24) -#define NETX_IRQ_IRQ_PHY (NETX_IRQ_VIC_START + 25) -#define NETX_IRQ_ISO_AREA (NETX_IRQ_VIC_START + 26) -/* int 27 is reserved */ -/* int 28 is reserved */ -#define NETX_IRQ_TIMER3 (NETX_IRQ_VIC_START + 29) -#define NETX_IRQ_TIMER4 (NETX_IRQ_VIC_START + 30) -/* int 31 is reserved */ - -#define NETX_IRQS (NETX_IRQ_VIC_START + 32) - -/* for multiplexed irqs on gpio 0..14 */ -#define NETX_IRQ_GPIO(x) (NETX_IRQS + (x)) -#define NETX_IRQ_GPIO_LAST NETX_IRQ_GPIO(14) - -/* Host interface interrupts */ -#define NETX_IRQ_HIF_CHAINED(x) (NETX_IRQ_GPIO_LAST + 1 + (x)) -#define NETX_IRQ_HIF_PIO35 NETX_IRQ_HIF_CHAINED(0) -#define NETX_IRQ_HIF_PIO36 NETX_IRQ_HIF_CHAINED(1) -#define NETX_IRQ_HIF_PIO40 NETX_IRQ_HIF_CHAINED(2) -#define NETX_IRQ_HIF_PIO47 NETX_IRQ_HIF_CHAINED(3) -#define NETX_IRQ_HIF_PIO72 NETX_IRQ_HIF_CHAINED(4) -#define NETX_IRQ_HIF_LAST NETX_IRQ_HIF_CHAINED(4) - -#define NR_IRQS (NETX_IRQ_HIF_LAST + 1) diff --git a/arch/arm/mach-netx/include/mach/netx-regs.h b/arch/arm/mach-netx/include/mach/netx-regs.h deleted file mode 100644 index 7c356a6ab80b..000000000000 --- a/arch/arm/mach-netx/include/mach/netx-regs.h +++ /dev/null @@ -1,420 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * arch/arm/mach-netx/include/mach/netx-regs.h - * - * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix - */ - -#ifndef __ASM_ARCH_NETX_REGS_H -#define __ASM_ARCH_NETX_REGS_H - -/* offsets relative to the beginning of the io space */ -#define NETX_OFS_SYSTEM 0x00000 -#define NETX_OFS_MEMCR 0x00100 -#define NETX_OFS_DPMAS 0x03000 -#define NETX_OFS_GPIO 0x00800 -#define NETX_OFS_PIO 0x00900 -#define NETX_OFS_UART0 0x00a00 -#define NETX_OFS_UART1 0x00a40 -#define NETX_OFS_UART2 0x00a80 -#define NETX_OF_MIIMU 0x00b00 -#define NETX_OFS_SPI 0x00c00 -#define NETX_OFS_I2C 0x00d00 -#define NETX_OFS_SYSTIME 0x01100 -#define NETX_OFS_RTC 0x01200 -#define NETX_OFS_EXTBUS 0x03600 -#define NETX_OFS_LCD 0x04000 -#define NETX_OFS_USB 0x20000 -#define NETX_OFS_XMAC0 0x60000 -#define NETX_OFS_XMAC1 0x61000 -#define NETX_OFS_XMAC2 0x62000 -#define NETX_OFS_XMAC3 0x63000 -#define NETX_OFS_XMAC(no) (0x60000 + (no) * 0x1000) -#define NETX_OFS_PFIFO 0x64000 -#define NETX_OFS_XPEC0 0x70000 -#define NETX_OFS_XPEC1 0x74000 -#define NETX_OFS_XPEC2 0x78000 -#define NETX_OFS_XPEC3 0x7c000 -#define NETX_OFS_XPEC(no) (0x70000 + (no) * 0x4000) -#define NETX_OFS_VIC 0xff000 - -/* physical addresses */ -#define NETX_PA_SYSTEM (NETX_IO_PHYS + NETX_OFS_SYSTEM) -#define NETX_PA_MEMCR (NETX_IO_PHYS + NETX_OFS_MEMCR) -#define NETX_PA_DPMAS (NETX_IO_PHYS + NETX_OFS_DPMAS) -#define NETX_PA_GPIO (NETX_IO_PHYS + NETX_OFS_GPIO) -#define NETX_PA_PIO (NETX_IO_PHYS + NETX_OFS_PIO) -#define NETX_PA_UART0 (NETX_IO_PHYS + NETX_OFS_UART0) -#define NETX_PA_UART1 (NETX_IO_PHYS + NETX_OFS_UART1) -#define NETX_PA_UART2 (NETX_IO_PHYS + NETX_OFS_UART2) -#define NETX_PA_MIIMU (NETX_IO_PHYS + NETX_OF_MIIMU) -#define NETX_PA_SPI (NETX_IO_PHYS + NETX_OFS_SPI) -#define NETX_PA_I2C (NETX_IO_PHYS + NETX_OFS_I2C) -#define NETX_PA_SYSTIME (NETX_IO_PHYS + NETX_OFS_SYSTIME) -#define NETX_PA_RTC (NETX_IO_PHYS + NETX_OFS_RTC) -#define NETX_PA_EXTBUS (NETX_IO_PHYS + NETX_OFS_EXTBUS) -#define NETX_PA_LCD (NETX_IO_PHYS + NETX_OFS_LCD) -#define NETX_PA_USB (NETX_IO_PHYS + NETX_OFS_USB) -#define NETX_PA_XMAC0 (NETX_IO_PHYS + NETX_OFS_XMAC0) -#define NETX_PA_XMAC1 (NETX_IO_PHYS + NETX_OFS_XMAC1) -#define NETX_PA_XMAC2 (NETX_IO_PHYS + NETX_OFS_XMAC2) -#define NETX_PA_XMAC3 (NETX_IO_PHYS + NETX_OFS_XMAC3) -#define NETX_PA_XMAC(no) (NETX_IO_PHYS + NETX_OFS_XMAC(no)) -#define NETX_PA_PFIFO (NETX_IO_PHYS + NETX_OFS_PFIFO) -#define NETX_PA_XPEC0 (NETX_IO_PHYS + NETX_OFS_XPEC0) -#define NETX_PA_XPEC1 (NETX_IO_PHYS + NETX_OFS_XPEC1) -#define NETX_PA_XPEC2 (NETX_IO_PHYS + NETX_OFS_XPEC2) -#define NETX_PA_XPEC3 (NETX_IO_PHYS + NETX_OFS_XPEC3) -#define NETX_PA_XPEC(no) (NETX_IO_PHYS + NETX_OFS_XPEC(no)) -#define NETX_PA_VIC (NETX_IO_PHYS + NETX_OFS_VIC) - -/* virtual addresses */ -#define NETX_VA_SYSTEM (NETX_IO_VIRT + NETX_OFS_SYSTEM) -#define NETX_VA_MEMCR (NETX_IO_VIRT + NETX_OFS_MEMCR) -#define NETX_VA_DPMAS (NETX_IO_VIRT + NETX_OFS_DPMAS) -#define NETX_VA_GPIO (NETX_IO_VIRT + NETX_OFS_GPIO) -#define NETX_VA_PIO (NETX_IO_VIRT + NETX_OFS_PIO) -#define NETX_VA_UART0 (NETX_IO_VIRT + NETX_OFS_UART0) -#define NETX_VA_UART1 (NETX_IO_VIRT + NETX_OFS_UART1) -#define NETX_VA_UART2 (NETX_IO_VIRT + NETX_OFS_UART2) -#define NETX_VA_MIIMU (NETX_IO_VIRT + NETX_OF_MIIMU) -#define NETX_VA_SPI (NETX_IO_VIRT + NETX_OFS_SPI) -#define NETX_VA_I2C (NETX_IO_VIRT + NETX_OFS_I2C) -#define NETX_VA_SYSTIME (NETX_IO_VIRT + NETX_OFS_SYSTIME) -#define NETX_VA_RTC (NETX_IO_VIRT + NETX_OFS_RTC) -#define NETX_VA_EXTBUS (NETX_IO_VIRT + NETX_OFS_EXTBUS) -#define NETX_VA_LCD (NETX_IO_VIRT + NETX_OFS_LCD) -#define NETX_VA_USB (NETX_IO_VIRT + NETX_OFS_USB) -#define NETX_VA_XMAC0 (NETX_IO_VIRT + NETX_OFS_XMAC0) -#define NETX_VA_XMAC1 (NETX_IO_VIRT + NETX_OFS_XMAC1) -#define NETX_VA_XMAC2 (NETX_IO_VIRT + NETX_OFS_XMAC2) -#define NETX_VA_XMAC3 (NETX_IO_VIRT + NETX_OFS_XMAC3) -#define NETX_VA_XMAC(no) (NETX_IO_VIRT + NETX_OFS_XMAC(no)) -#define NETX_VA_PFIFO (NETX_IO_VIRT + NETX_OFS_PFIFO) -#define NETX_VA_XPEC0 (NETX_IO_VIRT + NETX_OFS_XPEC0) -#define NETX_VA_XPEC1 (NETX_IO_VIRT + NETX_OFS_XPEC1) -#define NETX_VA_XPEC2 (NETX_IO_VIRT + NETX_OFS_XPEC2) -#define NETX_VA_XPEC3 (NETX_IO_VIRT + NETX_OFS_XPEC3) -#define NETX_VA_XPEC(no) (NETX_IO_VIRT + NETX_OFS_XPEC(no)) -#define NETX_VA_VIC (NETX_IO_VIRT + NETX_OFS_VIC) - -/********************************* - * System functions * - *********************************/ - -/* Registers */ -#define NETX_SYSTEM_REG(ofs) IOMEM(NETX_VA_SYSTEM + (ofs)) -#define NETX_SYSTEM_BOO_SR NETX_SYSTEM_REG(0x00) -#define NETX_SYSTEM_IOC_CR NETX_SYSTEM_REG(0x04) -#define NETX_SYSTEM_IOC_MR NETX_SYSTEM_REG(0x08) - -/* FIXME: Docs are not consistent */ -/* #define NETX_SYSTEM_RES_CR NETX_SYSTEM_REG(0x08) */ -#define NETX_SYSTEM_RES_CR NETX_SYSTEM_REG(0x0c) - -#define NETX_SYSTEM_PHY_CONTROL NETX_SYSTEM_REG(0x10) -#define NETX_SYSTEM_REV NETX_SYSTEM_REG(0x34) -#define NETX_SYSTEM_IOC_ACCESS_KEY NETX_SYSTEM_REG(0x70) -#define NETX_SYSTEM_WDG_TR NETX_SYSTEM_REG(0x200) -#define NETX_SYSTEM_WDG_CTR NETX_SYSTEM_REG(0x204) -#define NETX_SYSTEM_WDG_IRQ_TIMEOUT NETX_SYSTEM_REG(0x208) -#define NETX_SYSTEM_WDG_RES_TIMEOUT NETX_SYSTEM_REG(0x20c) - -/* Bits */ -#define NETX_SYSTEM_RES_CR_RSTIN (1<<0) -#define NETX_SYSTEM_RES_CR_WDG_RES (1<<1) -#define NETX_SYSTEM_RES_CR_HOST_RES (1<<2) -#define NETX_SYSTEM_RES_CR_FIRMW_RES (1<<3) -#define NETX_SYSTEM_RES_CR_XPEC0_RES (1<<4) -#define NETX_SYSTEM_RES_CR_XPEC1_RES (1<<5) -#define NETX_SYSTEM_RES_CR_XPEC2_RES (1<<6) -#define NETX_SYSTEM_RES_CR_XPEC3_RES (1<<7) -#define NETX_SYSTEM_RES_CR_DIS_XPEC0_RES (1<<16) -#define NETX_SYSTEM_RES_CR_DIS_XPEC1_RES (1<<17) -#define NETX_SYSTEM_RES_CR_DIS_XPEC2_RES (1<<18) -#define NETX_SYSTEM_RES_CR_DIS_XPEC3_RES (1<<19) -#define NETX_SYSTEM_RES_CR_FIRMW_FLG0 (1<<20) -#define NETX_SYSTEM_RES_CR_FIRMW_FLG1 (1<<21) -#define NETX_SYSTEM_RES_CR_FIRMW_FLG2 (1<<22) -#define NETX_SYSTEM_RES_CR_FIRMW_FLG3 (1<<23) -#define NETX_SYSTEM_RES_CR_FIRMW_RES_EN (1<<24) -#define NETX_SYSTEM_RES_CR_RSTOUT (1<<25) -#define NETX_SYSTEM_RES_CR_EN_RSTOUT (1<<26) - -#define PHY_CONTROL_RESET (1<<31) -#define PHY_CONTROL_SIM_BYP (1<<30) -#define PHY_CONTROL_CLK_XLATIN (1<<29) -#define PHY_CONTROL_PHY1_EN (1<<21) -#define PHY_CONTROL_PHY1_NP_MSG_CODE -#define PHY_CONTROL_PHY1_AUTOMDIX (1<<17) -#define PHY_CONTROL_PHY1_FIXMODE (1<<16) -#define PHY_CONTROL_PHY1_MODE(mode) (((mode) & 0x7) << 13) -#define PHY_CONTROL_PHY0_EN (1<<12) -#define PHY_CONTROL_PHY0_NP_MSG_CODE -#define PHY_CONTROL_PHY0_AUTOMDIX (1<<8) -#define PHY_CONTROL_PHY0_FIXMODE (1<<7) -#define PHY_CONTROL_PHY0_MODE(mode) (((mode) & 0x7) << 4) -#define PHY_CONTROL_PHY_ADDRESS(adr) ((adr) & 0xf) - -#define PHY_MODE_10BASE_T_HALF 0 -#define PHY_MODE_10BASE_T_FULL 1 -#define PHY_MODE_100BASE_TX_FX_FULL 2 -#define PHY_MODE_100BASE_TX_FX_HALF 3 -#define PHY_MODE_100BASE_TX_HALF 4 -#define PHY_MODE_REPEATER 5 -#define PHY_MODE_POWER_DOWN 6 -#define PHY_MODE_ALL 7 - -/* Bits */ -#define VECT_CNTL_ENABLE (1 << 5) - -/******************************* - * GPIO and timer module * - *******************************/ - -/* Registers */ -#define NETX_GPIO_REG(ofs) IOMEM(NETX_VA_GPIO + (ofs)) -#define NETX_GPIO_CFG(gpio) NETX_GPIO_REG(0x0 + ((gpio)<<2)) -#define NETX_GPIO_THRESHOLD_CAPTURE(gpio) NETX_GPIO_REG(0x40 + ((gpio)<<2)) -#define NETX_GPIO_COUNTER_CTRL(counter) NETX_GPIO_REG(0x80 + ((counter)<<2)) -#define NETX_GPIO_COUNTER_MAX(counter) NETX_GPIO_REG(0x94 + ((counter)<<2)) -#define NETX_GPIO_COUNTER_CURRENT(counter) NETX_GPIO_REG(0xa8 + ((counter)<<2)) -#define NETX_GPIO_IRQ_ENABLE NETX_GPIO_REG(0xbc) -#define NETX_GPIO_IRQ_DISABLE NETX_GPIO_REG(0xc0) -#define NETX_GPIO_SYSTIME_NS_CMP NETX_GPIO_REG(0xc4) -#define NETX_GPIO_LINE NETX_GPIO_REG(0xc8) -#define NETX_GPIO_IRQ NETX_GPIO_REG(0xd0) - -/* Bits */ -#define NETX_GPIO_CFG_IOCFG_GP_INPUT (0x0) -#define NETX_GPIO_CFG_IOCFG_GP_OUTPUT (0x1) -#define NETX_GPIO_CFG_IOCFG_GP_UART (0x2) -#define NETX_GPIO_CFG_INV (1<<2) -#define NETX_GPIO_CFG_MODE_INPUT_READ (0<<3) -#define NETX_GPIO_CFG_MODE_INPUT_CAPTURE_CONT_RISING (1<<3) -#define NETX_GPIO_CFG_MODE_INPUT_CAPTURE_ONCE_RISING (2<<3) -#define NETX_GPIO_CFG_MODE_INPUT_CAPTURE_HIGH_LEVEL (3<<3) -#define NETX_GPIO_CFG_COUNT_REF_COUNTER0 (0<<5) -#define NETX_GPIO_CFG_COUNT_REF_COUNTER1 (1<<5) -#define NETX_GPIO_CFG_COUNT_REF_COUNTER2 (2<<5) -#define NETX_GPIO_CFG_COUNT_REF_COUNTER3 (3<<5) -#define NETX_GPIO_CFG_COUNT_REF_COUNTER4 (4<<5) -#define NETX_GPIO_CFG_COUNT_REF_SYSTIME (7<<5) - -#define NETX_GPIO_COUNTER_CTRL_RUN (1<<0) -#define NETX_GPIO_COUNTER_CTRL_SYM (1<<1) -#define NETX_GPIO_COUNTER_CTRL_ONCE (1<<2) -#define NETX_GPIO_COUNTER_CTRL_IRQ_EN (1<<3) -#define NETX_GPIO_COUNTER_CTRL_CNT_EVENT (1<<4) -#define NETX_GPIO_COUNTER_CTRL_RST_EN (1<<5) -#define NETX_GPIO_COUNTER_CTRL_SEL_EVENT (1<<6) -#define NETX_GPIO_COUNTER_CTRL_GPIO_REF /* FIXME */ - -#define GPIO_BIT(gpio) (1<<(gpio)) -#define COUNTER_BIT(counter) ((1<<16)<<(counter)) - -/******************************* - * PIO * - *******************************/ - -/* Registers */ -#define NETX_PIO_REG(ofs) IOMEM(NETX_VA_PIO + (ofs)) -#define NETX_PIO_INPIO NETX_PIO_REG(0x0) -#define NETX_PIO_OUTPIO NETX_PIO_REG(0x4) -#define NETX_PIO_OEPIO NETX_PIO_REG(0x8) - -/******************************* - * MII Unit * - *******************************/ - -/* Registers */ -#define NETX_MIIMU IOMEM(NETX_VA_MIIMU) - -/* Bits */ -#define MIIMU_SNRDY (1<<0) -#define MIIMU_PREAMBLE (1<<1) -#define MIIMU_OPMODE_WRITE (1<<2) -#define MIIMU_MDC_PERIOD (1<<3) -#define MIIMU_PHY_NRES (1<<4) -#define MIIMU_RTA (1<<5) -#define MIIMU_REGADDR(adr) (((adr) & 0x1f) << 6) -#define MIIMU_PHYADDR(adr) (((adr) & 0x1f) << 11) -#define MIIMU_DATA(data) (((data) & 0xffff) << 16) - -/******************************* - * xmac / xpec * - *******************************/ - -/* XPEC register offsets relative to NETX_VA_XPEC(no) */ -#define NETX_XPEC_R0_OFS 0x00 -#define NETX_XPEC_R1_OFS 0x04 -#define NETX_XPEC_R2_OFS 0x08 -#define NETX_XPEC_R3_OFS 0x0c -#define NETX_XPEC_R4_OFS 0x10 -#define NETX_XPEC_R5_OFS 0x14 -#define NETX_XPEC_R6_OFS 0x18 -#define NETX_XPEC_R7_OFS 0x1c -#define NETX_XPEC_RANGE01_OFS 0x20 -#define NETX_XPEC_RANGE23_OFS 0x24 -#define NETX_XPEC_RANGE45_OFS 0x28 -#define NETX_XPEC_RANGE67_OFS 0x2c -#define NETX_XPEC_PC_OFS 0x48 -#define NETX_XPEC_TIMER_OFS(timer) (0x30 + ((timer)<<2)) -#define NETX_XPEC_IRQ_OFS 0x8c -#define NETX_XPEC_SYSTIME_NS_OFS 0x90 -#define NETX_XPEC_FIFO_DATA_OFS 0x94 -#define NETX_XPEC_SYSTIME_S_OFS 0x98 -#define NETX_XPEC_ADC_OFS 0x9c -#define NETX_XPEC_URX_COUNT_OFS 0x40 -#define NETX_XPEC_UTX_COUNT_OFS 0x44 -#define NETX_XPEC_PC_OFS 0x48 -#define NETX_XPEC_ZERO_OFS 0x4c -#define NETX_XPEC_STATCFG_OFS 0x50 -#define NETX_XPEC_EC_MASKA_OFS 0x54 -#define NETX_XPEC_EC_MASKB_OFS 0x58 -#define NETX_XPEC_EC_MASK0_OFS 0x5c -#define NETX_XPEC_EC_MASK8_OFS 0x7c -#define NETX_XPEC_EC_MASK9_OFS 0x80 -#define NETX_XPEC_XPU_HOLD_PC_OFS 0x100 -#define NETX_XPEC_RAM_START_OFS 0x2000 - -/* Bits */ -#define XPU_HOLD_PC (1<<0) - -/* XMAC register offsets relative to NETX_VA_XMAC(no) */ -#define NETX_XMAC_RPU_PROGRAM_START_OFS 0x000 -#define NETX_XMAC_RPU_PROGRAM_END_OFS 0x3ff -#define NETX_XMAC_TPU_PROGRAM_START_OFS 0x400 -#define NETX_XMAC_TPU_PROGRAM_END_OFS 0x7ff -#define NETX_XMAC_RPU_HOLD_PC_OFS 0xa00 -#define NETX_XMAC_TPU_HOLD_PC_OFS 0xa04 -#define NETX_XMAC_STATUS_SHARED0_OFS 0x840 -#define NETX_XMAC_CONFIG_SHARED0_OFS 0x844 -#define NETX_XMAC_STATUS_SHARED1_OFS 0x848 -#define NETX_XMAC_CONFIG_SHARED1_OFS 0x84c -#define NETX_XMAC_STATUS_SHARED2_OFS 0x850 -#define NETX_XMAC_CONFIG_SHARED2_OFS 0x854 -#define NETX_XMAC_STATUS_SHARED3_OFS 0x858 -#define NETX_XMAC_CONFIG_SHARED3_OFS 0x85c - -#define RPU_HOLD_PC (1<<15) -#define TPU_HOLD_PC (1<<15) - -/******************************* - * Pointer FIFO * - *******************************/ - -/* Registers */ -#define NETX_PFIFO_REG(ofs) IOMEM(NETX_VA_PFIFO + (ofs)) -#define NETX_PFIFO_BASE(pfifo) NETX_PFIFO_REG(0x00 + ((pfifo)<<2)) -#define NETX_PFIFO_BORDER_BASE(pfifo) NETX_PFIFO_REG(0x80 + ((pfifo)<<2)) -#define NETX_PFIFO_RESET NETX_PFIFO_REG(0x100) -#define NETX_PFIFO_FULL NETX_PFIFO_REG(0x104) -#define NETX_PFIFO_EMPTY NETX_PFIFO_REG(0x108) -#define NETX_PFIFO_OVEFLOW NETX_PFIFO_REG(0x10c) -#define NETX_PFIFO_UNDERRUN NETX_PFIFO_REG(0x110) -#define NETX_PFIFO_FILL_LEVEL(pfifo) NETX_PFIFO_REG(0x180 + ((pfifo)<<2)) -#define NETX_PFIFO_XPEC_ISR(xpec) NETX_PFIFO_REG(0x400 + ((xpec) << 2)) - - -/******************************* - * Memory Controller * - *******************************/ - -/* Registers */ -#define NETX_MEMCR_REG(ofs) IOMEM(NETX_VA_MEMCR + (ofs)) -#define NETX_MEMCR_SRAM_CTRL(cs) NETX_MEMCR_REG(0x0 + 4 * (cs)) /* SRAM for CS 0..2 */ -#define NETX_MEMCR_SDRAM_CFG_CTRL NETX_MEMCR_REG(0x40) -#define NETX_MEMCR_SDRAM_TIMING_CTRL NETX_MEMCR_REG(0x44) -#define NETX_MEMCR_SDRAM_MODE NETX_MEMCR_REG(0x48) -#define NETX_MEMCR_SDRAM_EXT_MODE NETX_MEMCR_REG(0x4c) -#define NETX_MEMCR_PRIO_TIMESLOT_CTRL NETX_MEMCR_REG(0x80) -#define NETX_MEMCR_PRIO_ACCESS_CTRL NETX_MEMCR_REG(0x84) - -/* Bits */ -#define NETX_MEMCR_SRAM_CTRL_WIDTHEXTMEM(x) (((x) & 0x3) << 24) -#define NETX_MEMCR_SRAM_CTRL_WSPOSTPAUSEEXTMEM(x) (((x) & 0x3) << 16) -#define NETX_MEMCR_SRAM_CTRL_WSPREPASEEXTMEM(x) (((x) & 0x3) << 8) -#define NETX_MEMCR_SRAM_CTRL_WSEXTMEM(x) (((x) & 0x1f) << 0) - - -/******************************* - * Dual Port Memory * - *******************************/ - -/* Registers */ -#define NETX_DPMAS_REG(ofs) IOMEM(NETX_VA_DPMAS + (ofs)) -#define NETX_DPMAS_SYS_STAT NETX_DPMAS_REG(0x4d8) -#define NETX_DPMAS_INT_STAT NETX_DPMAS_REG(0x4e0) -#define NETX_DPMAS_INT_EN NETX_DPMAS_REG(0x4f0) -#define NETX_DPMAS_IF_CONF0 NETX_DPMAS_REG(0x608) -#define NETX_DPMAS_IF_CONF1 NETX_DPMAS_REG(0x60c) -#define NETX_DPMAS_EXT_CONFIG(cs) NETX_DPMAS_REG(0x610 + 4 * (cs)) -#define NETX_DPMAS_IO_MODE0 NETX_DPMAS_REG(0x620) /* I/O 32..63 */ -#define NETX_DPMAS_DRV_EN0 NETX_DPMAS_REG(0x624) -#define NETX_DPMAS_DATA0 NETX_DPMAS_REG(0x628) -#define NETX_DPMAS_IO_MODE1 NETX_DPMAS_REG(0x630) /* I/O 64..84 */ -#define NETX_DPMAS_DRV_EN1 NETX_DPMAS_REG(0x634) -#define NETX_DPMAS_DATA1 NETX_DPMAS_REG(0x638) - -/* Bits */ -#define NETX_DPMAS_INT_EN_GLB_EN (1<<31) -#define NETX_DPMAS_INT_EN_MEM_LCK (1<<30) -#define NETX_DPMAS_INT_EN_WDG (1<<29) -#define NETX_DPMAS_INT_EN_PIO72 (1<<28) -#define NETX_DPMAS_INT_EN_PIO47 (1<<27) -#define NETX_DPMAS_INT_EN_PIO40 (1<<26) -#define NETX_DPMAS_INT_EN_PIO36 (1<<25) -#define NETX_DPMAS_INT_EN_PIO35 (1<<24) - -#define NETX_DPMAS_IF_CONF0_HIF_DISABLED (0<<28) -#define NETX_DPMAS_IF_CONF0_HIF_EXT_BUS (1<<28) -#define NETX_DPMAS_IF_CONF0_HIF_UP_8BIT (2<<28) -#define NETX_DPMAS_IF_CONF0_HIF_UP_16BIT (3<<28) -#define NETX_DPMAS_IF_CONF0_HIF_IO (4<<28) -#define NETX_DPMAS_IF_CONF0_WAIT_DRV_PP (1<<14) -#define NETX_DPMAS_IF_CONF0_WAIT_DRV_OD (2<<14) -#define NETX_DPMAS_IF_CONF0_WAIT_DRV_TRI (3<<14) - -#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO35 (1<<26) -#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO36 (1<<27) -#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO40 (1<<28) -#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO47 (1<<29) -#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO72 (1<<30) - -#define NETX_EXT_CONFIG_TALEWIDTH(x) (((x) & 0x7) << 29) -#define NETX_EXT_CONFIG_TADRHOLD(x) (((x) & 0x7) << 26) -#define NETX_EXT_CONFIG_TCSON(x) (((x) & 0x7) << 23) -#define NETX_EXT_CONFIG_TRDON(x) (((x) & 0x7) << 20) -#define NETX_EXT_CONFIG_TWRON(x) (((x) & 0x7) << 17) -#define NETX_EXT_CONFIG_TWROFF(x) (((x) & 0x1f) << 12) -#define NETX_EXT_CONFIG_TRDWRCYC(x) (((x) & 0x1f) << 7) -#define NETX_EXT_CONFIG_WAIT_POL (1<<6) -#define NETX_EXT_CONFIG_WAIT_EN (1<<5) -#define NETX_EXT_CONFIG_NRD_MODE (1<<4) -#define NETX_EXT_CONFIG_DS_MODE (1<<3) -#define NETX_EXT_CONFIG_NWR_MODE (1<<2) -#define NETX_EXT_CONFIG_16BIT (1<<1) -#define NETX_EXT_CONFIG_CS_ENABLE (1<<0) - -#define NETX_DPMAS_IO_MODE0_WRL (1<<13) -#define NETX_DPMAS_IO_MODE0_WAIT (1<<14) -#define NETX_DPMAS_IO_MODE0_READY (1<<15) -#define NETX_DPMAS_IO_MODE0_CS0 (1<<19) -#define NETX_DPMAS_IO_MODE0_EXTRD (1<<20) - -#define NETX_DPMAS_IO_MODE1_CS2 (1<<15) -#define NETX_DPMAS_IO_MODE1_CS1 (1<<16) -#define NETX_DPMAS_IO_MODE1_SAMPLE_NPOR (0<<30) -#define NETX_DPMAS_IO_MODE1_SAMPLE_100MHZ (1<<30) -#define NETX_DPMAS_IO_MODE1_SAMPLE_NPIO36 (2<<30) -#define NETX_DPMAS_IO_MODE1_SAMPLE_PIO36 (3<<30) - -/******************************* - * I2C * - *******************************/ -#define NETX_I2C_REG(ofs) IOMEM(NETX_VA_I2C, (ofs)) -#define NETX_I2C_CTRL NETX_I2C_REG(0x0) -#define NETX_I2C_DATA NETX_I2C_REG(0x4) - -#endif /* __ASM_ARCH_NETX_REGS_H */ diff --git a/arch/arm/mach-netx/include/mach/pfifo.h b/arch/arm/mach-netx/include/mach/pfifo.h deleted file mode 100644 index de23180bc937..000000000000 --- a/arch/arm/mach-netx/include/mach/pfifo.h +++ /dev/null @@ -1,42 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * arch/arm/mach-netx/include/mach/pfifo.h - * - * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix - */ - - -#ifndef ASM_ARCH_PFIFO_H -#define ASM_ARCH_PFIFO_H - -static inline int pfifo_push(int no, unsigned int pointer) -{ - writel(pointer, NETX_PFIFO_BASE(no)); - return 0; -} - -static inline unsigned int pfifo_pop(int no) -{ - return readl(NETX_PFIFO_BASE(no)); -} - -static inline int pfifo_fill_level(int no) -{ - - return readl(NETX_PFIFO_FILL_LEVEL(no)); -} - -static inline int pfifo_full(int no) -{ - return readl(NETX_PFIFO_FULL) & (1<<no) ? 1 : 0; -} - -static inline int pfifo_empty(int no) -{ - return readl(NETX_PFIFO_EMPTY) & (1<<no) ? 1 : 0; -} - -int pfifo_request(unsigned int pfifo_mask); -void pfifo_free(unsigned int pfifo_mask); - -#endif /* ASM_ARCH_PFIFO_H */ diff --git a/arch/arm/mach-netx/include/mach/uncompress.h b/arch/arm/mach-netx/include/mach/uncompress.h deleted file mode 100644 index edc1ac997eab..000000000000 --- a/arch/arm/mach-netx/include/mach/uncompress.h +++ /dev/null @@ -1,63 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * arch/arm/mach-netx/include/mach/uncompress.h - * - * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix - */ - -/* - * The following code assumes the serial port has already been - * initialized by the bootloader. We search for the first enabled - * port in the most probable order. If you didn't setup a port in - * your bootloader then nothing will appear (which might be desired). - * - * This does not append a newline - */ - -#define REG(x) (*(volatile unsigned long *)(x)) - -#define UART1_BASE 0x100a00 -#define UART2_BASE 0x100a80 - -#define UART_DR 0x0 - -#define UART_CR 0x14 -#define CR_UART_EN (1<<0) - -#define UART_FR 0x18 -#define FR_BUSY (1<<3) -#define FR_TXFF (1<<5) - -static inline void putc(char c) -{ - unsigned long base; - - if (REG(UART1_BASE + UART_CR) & CR_UART_EN) - base = UART1_BASE; - else if (REG(UART2_BASE + UART_CR) & CR_UART_EN) - base = UART2_BASE; - else - return; - - while (REG(base + UART_FR) & FR_TXFF); - REG(base + UART_DR) = c; -} - -static inline void flush(void) -{ - unsigned long base; - - if (REG(UART1_BASE + UART_CR) & CR_UART_EN) - base = UART1_BASE; - else if (REG(UART2_BASE + UART_CR) & CR_UART_EN) - base = UART2_BASE; - else - return; - - while (REG(base + UART_FR) & FR_BUSY); -} - -/* - * nothing to do - */ -#define arch_decomp_setup() diff --git a/arch/arm/mach-netx/include/mach/xc.h b/arch/arm/mach-netx/include/mach/xc.h deleted file mode 100644 index 465d5e250ab8..000000000000 --- a/arch/arm/mach-netx/include/mach/xc.h +++ /dev/null @@ -1,30 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * arch/arm/mach-netx/include/mach/xc.h - * - * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix - */ - -#ifndef __ASM_ARCH_XC_H -#define __ASM_ARCH_XC_H - -struct xc { - int no; - unsigned int type; - unsigned int version; - void __iomem *xpec_base; - void __iomem *xmac_base; - void __iomem *sram_base; - int irq; - struct device *dev; -}; - -int xc_reset(struct xc *x); -int xc_stop(struct xc* x); -int xc_start(struct xc *x); -int xc_running(struct xc *x); -int xc_request_firmware(struct xc* x); -struct xc* request_xc(int xcno, struct device *dev); -void free_xc(struct xc *x); - -#endif /* __ASM_ARCH_XC_H */ diff --git a/arch/arm/mach-netx/nxdb500.c b/arch/arm/mach-netx/nxdb500.c deleted file mode 100644 index ad5e6747b834..000000000000 --- a/arch/arm/mach-netx/nxdb500.c +++ /dev/null @@ -1,197 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * arch/arm/mach-netx/nxdb500.c - * - * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix - */ - -#include <linux/dma-mapping.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/mtd/plat-ram.h> -#include <linux/platform_device.h> -#include <linux/amba/bus.h> -#include <linux/amba/clcd.h> - -#include <mach/hardware.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <mach/netx-regs.h> -#include <linux/platform_data/eth-netx.h> - -#include "generic.h" -#include "fb.h" - -static struct clcd_panel qvga = { - .mode = { - .name = "QVGA", - .refresh = 60, - .xres = 240, - .yres = 320, - .pixclock = 187617, - .left_margin = 6, - .right_margin = 26, - .upper_margin = 0, - .lower_margin = 6, - .hsync_len = 6, - .vsync_len = 1, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = 16, - .cntl = CNTL_LCDTFT | CNTL_BGR, - .bpp = 16, - .grayscale = 0, -}; - -static inline int nxdb500_check(struct clcd_fb *fb, struct fb_var_screeninfo *var) -{ - var->green.length = 5; - var->green.msb_right = 0; - - return clcdfb_check(fb, var); -} - -static int nxdb500_clcd_setup(struct clcd_fb *fb) -{ - unsigned int val; - - fb->fb.var.green.length = 5; - fb->fb.var.green.msb_right = 0; - - /* enable asic control */ - val = readl(NETX_SYSTEM_IOC_ACCESS_KEY); - writel(val, NETX_SYSTEM_IOC_ACCESS_KEY); - - writel(3, NETX_SYSTEM_IOC_CR); - - val = readl(NETX_PIO_OUTPIO); - writel(val | 1, NETX_PIO_OUTPIO); - - val = readl(NETX_PIO_OEPIO); - writel(val | 1, NETX_PIO_OEPIO); - return netx_clcd_setup(fb); -} - -static struct clcd_board clcd_data = { - .name = "netX", - .check = nxdb500_check, - .decode = clcdfb_decode, - .enable = netx_clcd_enable, - .setup = nxdb500_clcd_setup, - .mmap = netx_clcd_mmap, - .remove = netx_clcd_remove, -}; - -static struct netxeth_platform_data eth0_platform_data = { - .xcno = 0, -}; - -static struct platform_device netx_eth0_device = { - .name = "netx-eth", - .id = 0, - .num_resources = 0, - .resource = NULL, - .dev = { - .platform_data = ð0_platform_data, - } -}; - -static struct netxeth_platform_data eth1_platform_data = { - .xcno = 1, -}; - -static struct platform_device netx_eth1_device = { - .name = "netx-eth", - .id = 1, - .num_resources = 0, - .resource = NULL, - .dev = { - .platform_data = ð1_platform_data, - } -}; - -static struct resource netx_uart0_resources[] = { - [0] = { - .start = 0x00100A00, - .end = 0x00100A3F, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = (NETX_IRQ_UART0), - .end = (NETX_IRQ_UART0), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device netx_uart0_device = { - .name = "netx-uart", - .id = 0, - .num_resources = ARRAY_SIZE(netx_uart0_resources), - .resource = netx_uart0_resources, -}; - -static struct resource netx_uart1_resources[] = { - [0] = { - .start = 0x00100A40, - .end = 0x00100A7F, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = (NETX_IRQ_UART1), - .end = (NETX_IRQ_UART1), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device netx_uart1_device = { - .name = "netx-uart", - .id = 1, - .num_resources = ARRAY_SIZE(netx_uart1_resources), - .resource = netx_uart1_resources, -}; - -static struct resource netx_uart2_resources[] = { - [0] = { - .start = 0x00100A80, - .end = 0x00100ABF, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = (NETX_IRQ_UART2), - .end = (NETX_IRQ_UART2), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device netx_uart2_device = { - .name = "netx-uart", - .id = 2, - .num_resources = ARRAY_SIZE(netx_uart2_resources), - .resource = netx_uart2_resources, -}; - -static struct platform_device *devices[] __initdata = { - &netx_eth0_device, - &netx_eth1_device, - &netx_uart0_device, - &netx_uart1_device, - &netx_uart2_device, -}; - -static void __init nxdb500_init(void) -{ - netx_fb_init(&clcd_data, &qvga); - platform_add_devices(devices, ARRAY_SIZE(devices)); -} - -MACHINE_START(NXDB500, "Hilscher nxdb500") - .atag_offset = 0x100, - .map_io = netx_map_io, - .init_irq = netx_init_irq, - .init_time = netx_timer_init, - .init_machine = nxdb500_init, - .restart = netx_restart, -MACHINE_END diff --git a/arch/arm/mach-netx/nxdkn.c b/arch/arm/mach-netx/nxdkn.c deleted file mode 100644 index 917381559628..000000000000 --- a/arch/arm/mach-netx/nxdkn.c +++ /dev/null @@ -1,90 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * arch/arm/mach-netx/nxdkn.c - * - * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix - */ - -#include <linux/dma-mapping.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/mtd/plat-ram.h> -#include <linux/platform_device.h> -#include <linux/amba/bus.h> -#include <linux/amba/clcd.h> - -#include <mach/hardware.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <mach/netx-regs.h> -#include <linux/platform_data/eth-netx.h> - -#include "generic.h" - -static struct netxeth_platform_data eth0_platform_data = { - .xcno = 0, -}; - -static struct platform_device nxdkn_eth0_device = { - .name = "netx-eth", - .id = 0, - .num_resources = 0, - .resource = NULL, - .dev = { - .platform_data = ð0_platform_data, - } -}; - -static struct netxeth_platform_data eth1_platform_data = { - .xcno = 1, -}; - -static struct platform_device nxdkn_eth1_device = { - .name = "netx-eth", - .id = 1, - .num_resources = 0, - .resource = NULL, - .dev = { - .platform_data = ð1_platform_data, - } -}; - -static struct resource netx_uart0_resources[] = { - [0] = { - .start = 0x00100A00, - .end = 0x00100A3F, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = (NETX_IRQ_UART0), - .end = (NETX_IRQ_UART0), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device netx_uart0_device = { - .name = "netx-uart", - .id = 0, - .num_resources = ARRAY_SIZE(netx_uart0_resources), - .resource = netx_uart0_resources, -}; - -static struct platform_device *devices[] __initdata = { - &nxdkn_eth0_device, - &nxdkn_eth1_device, - &netx_uart0_device, -}; - -static void __init nxdkn_init(void) -{ - platform_add_devices(devices, ARRAY_SIZE(devices)); -} - -MACHINE_START(NXDKN, "Hilscher nxdkn") - .atag_offset = 0x100, - .map_io = netx_map_io, - .init_irq = netx_init_irq, - .init_time = netx_timer_init, - .init_machine = nxdkn_init, - .restart = netx_restart, -MACHINE_END diff --git a/arch/arm/mach-netx/nxeb500hmi.c b/arch/arm/mach-netx/nxeb500hmi.c deleted file mode 100644 index aa0d5b2ca712..000000000000 --- a/arch/arm/mach-netx/nxeb500hmi.c +++ /dev/null @@ -1,174 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * arch/arm/mach-netx/nxeb500hmi.c - * - * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix - */ - -#include <linux/dma-mapping.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/mtd/plat-ram.h> -#include <linux/platform_device.h> -#include <linux/amba/bus.h> -#include <linux/amba/clcd.h> - -#include <mach/hardware.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <mach/netx-regs.h> -#include <linux/platform_data/eth-netx.h> - -#include "generic.h" -#include "fb.h" - -static struct clcd_panel qvga = { - .mode = { - .name = "QVGA", - .refresh = 60, - .xres = 240, - .yres = 320, - .pixclock = 187617, - .left_margin = 6, - .right_margin = 26, - .upper_margin = 0, - .lower_margin = 6, - .hsync_len = 6, - .vsync_len = 1, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED, - }, - .width = -1, - .height = -1, - .tim2 = 16, - .cntl = CNTL_LCDTFT | CNTL_BGR, - .bpp = 16, - .grayscale = 0, -}; - -static inline int nxeb500hmi_check(struct clcd_fb *fb, struct fb_var_screeninfo *var) -{ - var->green.length = 5; - var->green.msb_right = 0; - - return clcdfb_check(fb, var); -} - -static int nxeb500hmi_clcd_setup(struct clcd_fb *fb) -{ - unsigned int val; - - fb->fb.var.green.length = 5; - fb->fb.var.green.msb_right = 0; - - /* enable asic control */ - val = readl(NETX_SYSTEM_IOC_ACCESS_KEY); - writel(val, NETX_SYSTEM_IOC_ACCESS_KEY); - - writel(3, NETX_SYSTEM_IOC_CR); - - /* GPIO 14 is used for display enable on newer boards */ - writel(9, NETX_GPIO_CFG(14)); - - val = readl(NETX_PIO_OUTPIO); - writel(val | 1, NETX_PIO_OUTPIO); - - val = readl(NETX_PIO_OEPIO); - writel(val | 1, NETX_PIO_OEPIO); - return netx_clcd_setup(fb); -} - -static struct clcd_board clcd_data = { - .name = "netX", - .check = nxeb500hmi_check, - .decode = clcdfb_decode, - .enable = netx_clcd_enable, - .setup = nxeb500hmi_clcd_setup, - .mmap = netx_clcd_mmap, - .remove = netx_clcd_remove, -}; - -static struct netxeth_platform_data eth0_platform_data = { - .xcno = 0, -}; - -static struct platform_device netx_eth0_device = { - .name = "netx-eth", - .id = 0, - .num_resources = 0, - .resource = NULL, - .dev = { - .platform_data = ð0_platform_data, - } -}; - -static struct netxeth_platform_data eth1_platform_data = { - .xcno = 1, -}; - -static struct platform_device netx_eth1_device = { - .name = "netx-eth", - .id = 1, - .num_resources = 0, - .resource = NULL, - .dev = { - .platform_data = ð1_platform_data, - } -}; - -static struct resource netx_cf_resources[] = { - [0] = { - .start = 0x20000000, - .end = 0x25ffffff, - .flags = IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT, - }, -}; - -static struct platform_device netx_cf_device = { - .name = "netx-cf", - .id = 0, - .resource = netx_cf_resources, - .num_resources = ARRAY_SIZE(netx_cf_resources), -}; - -static struct resource netx_uart0_resources[] = { - [0] = { - .start = 0x00100A00, - .end = 0x00100A3F, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = (NETX_IRQ_UART0), - .end = (NETX_IRQ_UART0), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device netx_uart0_device = { - .name = "netx-uart", - .id = 0, - .num_resources = ARRAY_SIZE(netx_uart0_resources), - .resource = netx_uart0_resources, -}; - -static struct platform_device *devices[] __initdata = { - &netx_eth0_device, - &netx_eth1_device, - &netx_cf_device, - &netx_uart0_device, -}; - -static void __init nxeb500hmi_init(void) -{ - netx_fb_init(&clcd_data, &qvga); - platform_add_devices(devices, ARRAY_SIZE(devices)); -} - -MACHINE_START(NXEB500HMI, "Hilscher nxeb500hmi") - .atag_offset = 0x100, - .map_io = netx_map_io, - .init_irq = netx_init_irq, - .init_time = netx_timer_init, - .init_machine = nxeb500hmi_init, - .restart = netx_restart, -MACHINE_END diff --git a/arch/arm/mach-netx/pfifo.c b/arch/arm/mach-netx/pfifo.c deleted file mode 100644 index 2e5cc777329f..000000000000 --- a/arch/arm/mach-netx/pfifo.c +++ /dev/null @@ -1,56 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * arch/arm/mach-netx/pfifo.c - * - * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix - */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/mutex.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <mach/netx-regs.h> -#include <mach/pfifo.h> - -static DEFINE_MUTEX(pfifo_lock); - -static unsigned int pfifo_used = 0; - -int pfifo_request(unsigned int pfifo_mask) -{ - int err = 0; - unsigned int val; - - mutex_lock(&pfifo_lock); - - if (pfifo_mask & pfifo_used) { - err = -EBUSY; - goto out; - } - - pfifo_used |= pfifo_mask; - - val = readl(NETX_PFIFO_RESET); - writel(val | pfifo_mask, NETX_PFIFO_RESET); - writel(val, NETX_PFIFO_RESET); - -out: - mutex_unlock(&pfifo_lock); - return err; -} - -void pfifo_free(unsigned int pfifo_mask) -{ - mutex_lock(&pfifo_lock); - pfifo_used &= ~pfifo_mask; - mutex_unlock(&pfifo_lock); -} - -EXPORT_SYMBOL(pfifo_push); -EXPORT_SYMBOL(pfifo_pop); -EXPORT_SYMBOL(pfifo_fill_level); -EXPORT_SYMBOL(pfifo_empty); -EXPORT_SYMBOL(pfifo_request); -EXPORT_SYMBOL(pfifo_free); diff --git a/arch/arm/mach-netx/time.c b/arch/arm/mach-netx/time.c deleted file mode 100644 index d9defa1ab605..000000000000 --- a/arch/arm/mach-netx/time.c +++ /dev/null @@ -1,141 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * arch/arm/mach-netx/time.c - * - * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix - */ - -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/clocksource.h> -#include <linux/clockchips.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <asm/mach/time.h> -#include <mach/netx-regs.h> - -#define NETX_CLOCK_FREQ 100000000 -#define NETX_LATCH DIV_ROUND_CLOSEST(NETX_CLOCK_FREQ, HZ) - -#define TIMER_CLOCKEVENT 0 -#define TIMER_CLOCKSOURCE 1 - -static inline void timer_shutdown(struct clock_event_device *evt) -{ - /* disable timer */ - writel(0, NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKEVENT)); -} - -static int netx_shutdown(struct clock_event_device *evt) -{ - timer_shutdown(evt); - - return 0; -} - -static int netx_set_oneshot(struct clock_event_device *evt) -{ - u32 tmode = NETX_GPIO_COUNTER_CTRL_IRQ_EN | NETX_GPIO_COUNTER_CTRL_RUN; - - timer_shutdown(evt); - writel(0, NETX_GPIO_COUNTER_MAX(TIMER_CLOCKEVENT)); - writel(tmode, NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKEVENT)); - - return 0; -} - -static int netx_set_periodic(struct clock_event_device *evt) -{ - u32 tmode = NETX_GPIO_COUNTER_CTRL_RST_EN | - NETX_GPIO_COUNTER_CTRL_IRQ_EN | NETX_GPIO_COUNTER_CTRL_RUN; - - timer_shutdown(evt); - writel(NETX_LATCH, NETX_GPIO_COUNTER_MAX(TIMER_CLOCKEVENT)); - writel(tmode, NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKEVENT)); - - return 0; -} - -static int netx_set_next_event(unsigned long evt, - struct clock_event_device *clk) -{ - writel(0 - evt, NETX_GPIO_COUNTER_CURRENT(TIMER_CLOCKEVENT)); - return 0; -} - -static struct clock_event_device netx_clockevent = { - .name = "netx-timer" __stringify(TIMER_CLOCKEVENT), - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .set_next_event = netx_set_next_event, - .set_state_shutdown = netx_shutdown, - .set_state_periodic = netx_set_periodic, - .set_state_oneshot = netx_set_oneshot, - .tick_resume = netx_shutdown, -}; - -/* - * IRQ handler for the timer - */ -static irqreturn_t -netx_timer_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *evt = &netx_clockevent; - - /* acknowledge interrupt */ - writel(COUNTER_BIT(0), NETX_GPIO_IRQ); - - evt->event_handler(evt); - - return IRQ_HANDLED; -} - -static struct irqaction netx_timer_irq = { - .name = "NetX Timer Tick", - .flags = IRQF_TIMER | IRQF_IRQPOLL, - .handler = netx_timer_interrupt, -}; - -/* - * Set up timer interrupt - */ -void __init netx_timer_init(void) -{ - /* disable timer initially */ - writel(0, NETX_GPIO_COUNTER_CTRL(0)); - - /* Reset the timer value to zero */ - writel(0, NETX_GPIO_COUNTER_CURRENT(0)); - - writel(NETX_LATCH, NETX_GPIO_COUNTER_MAX(0)); - - /* acknowledge interrupt */ - writel(COUNTER_BIT(0), NETX_GPIO_IRQ); - - /* Enable the interrupt in the specific timer - * register and start timer - */ - writel(COUNTER_BIT(0), NETX_GPIO_IRQ_ENABLE); - writel(NETX_GPIO_COUNTER_CTRL_IRQ_EN | NETX_GPIO_COUNTER_CTRL_RUN, - NETX_GPIO_COUNTER_CTRL(0)); - - setup_irq(NETX_IRQ_TIMER0, &netx_timer_irq); - - /* Setup timer one for clocksource */ - writel(0, NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKSOURCE)); - writel(0, NETX_GPIO_COUNTER_CURRENT(TIMER_CLOCKSOURCE)); - writel(0xffffffff, NETX_GPIO_COUNTER_MAX(TIMER_CLOCKSOURCE)); - - writel(NETX_GPIO_COUNTER_CTRL_RUN, - NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKSOURCE)); - - clocksource_mmio_init(NETX_GPIO_COUNTER_CURRENT(TIMER_CLOCKSOURCE), - "netx_timer", NETX_CLOCK_FREQ, 200, 32, clocksource_mmio_readl_up); - - /* with max_delta_ns >= delta2ns(0x800) the system currently runs fine. - * Adding some safety ... */ - netx_clockevent.cpumask = cpumask_of(0); - clockevents_config_and_register(&netx_clockevent, NETX_CLOCK_FREQ, - 0xa00, 0xfffffffe); -} diff --git a/arch/arm/mach-netx/xc.c b/arch/arm/mach-netx/xc.c deleted file mode 100644 index 885a618b2651..000000000000 --- a/arch/arm/mach-netx/xc.c +++ /dev/null @@ -1,246 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * arch/arm/mach-netx/xc.c - * - * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix - */ - -#include <linux/init.h> -#include <linux/device.h> -#include <linux/firmware.h> -#include <linux/mutex.h> -#include <linux/slab.h> -#include <linux/io.h> -#include <linux/export.h> - -#include <mach/hardware.h> -#include <mach/irqs.h> -#include <mach/netx-regs.h> - -#include <mach/xc.h> - -static DEFINE_MUTEX(xc_lock); - -static int xc_in_use = 0; - -struct fw_desc { - unsigned int ofs; - unsigned int size; - unsigned int patch_ofs; - unsigned int patch_entries; -}; - -struct fw_header { - unsigned int magic; - unsigned int type; - unsigned int version; - unsigned int reserved[5]; - struct fw_desc fw_desc[3]; -} __attribute__ ((packed)); - -int xc_stop(struct xc *x) -{ - writel(RPU_HOLD_PC, x->xmac_base + NETX_XMAC_RPU_HOLD_PC_OFS); - writel(TPU_HOLD_PC, x->xmac_base + NETX_XMAC_TPU_HOLD_PC_OFS); - writel(XPU_HOLD_PC, x->xpec_base + NETX_XPEC_XPU_HOLD_PC_OFS); - return 0; -} - -int xc_start(struct xc *x) -{ - writel(0, x->xmac_base + NETX_XMAC_RPU_HOLD_PC_OFS); - writel(0, x->xmac_base + NETX_XMAC_TPU_HOLD_PC_OFS); - writel(0, x->xpec_base + NETX_XPEC_XPU_HOLD_PC_OFS); - return 0; -} - -int xc_running(struct xc *x) -{ - return (readl(x->xmac_base + NETX_XMAC_RPU_HOLD_PC_OFS) & RPU_HOLD_PC) - || (readl(x->xmac_base + NETX_XMAC_TPU_HOLD_PC_OFS) & TPU_HOLD_PC) - || (readl(x->xpec_base + NETX_XPEC_XPU_HOLD_PC_OFS) & XPU_HOLD_PC) ? - 0 : 1; -} - -int xc_reset(struct xc *x) -{ - writel(0, x->xpec_base + NETX_XPEC_PC_OFS); - return 0; -} - -static int xc_check_ptr(struct xc *x, unsigned long adr, unsigned int size) -{ - if (adr >= NETX_PA_XMAC(x->no) && - adr + size < NETX_PA_XMAC(x->no) + XMAC_MEM_SIZE) - return 0; - - if (adr >= NETX_PA_XPEC(x->no) && - adr + size < NETX_PA_XPEC(x->no) + XPEC_MEM_SIZE) - return 0; - - dev_err(x->dev, "Illegal pointer in firmware found. aborting\n"); - - return -1; -} - -static int xc_patch(struct xc *x, const void *patch, int count) -{ - unsigned int val, adr; - const unsigned int *data = patch; - - int i; - for (i = 0; i < count; i++) { - adr = *data++; - val = *data++; - if (xc_check_ptr(x, adr, 4) < 0) - return -EINVAL; - - writel(val, (void __iomem *)io_p2v(adr)); - } - return 0; -} - -int xc_request_firmware(struct xc *x) -{ - int ret; - char name[16]; - const struct firmware *fw; - struct fw_header *head; - unsigned int size; - int i; - const void *src; - unsigned long dst; - - sprintf(name, "xc%d.bin", x->no); - - ret = request_firmware(&fw, name, x->dev); - - if (ret < 0) { - dev_err(x->dev, "request_firmware failed\n"); - return ret; - } - - head = (struct fw_header *)fw->data; - if (head->magic != 0x4e657458) { - if (head->magic == 0x5874654e) { - dev_err(x->dev, - "firmware magic is 'XteN'. Endianness problems?\n"); - ret = -ENODEV; - goto exit_release_firmware; - } - dev_err(x->dev, "unrecognized firmware magic 0x%08x\n", - head->magic); - ret = -ENODEV; - goto exit_release_firmware; - } - - x->type = head->type; - x->version = head->version; - - ret = -EINVAL; - - for (i = 0; i < 3; i++) { - src = fw->data + head->fw_desc[i].ofs; - dst = *(unsigned int *)src; - src += sizeof (unsigned int); - size = head->fw_desc[i].size - sizeof (unsigned int); - - if (xc_check_ptr(x, dst, size)) - goto exit_release_firmware; - - memcpy((void *)io_p2v(dst), src, size); - - src = fw->data + head->fw_desc[i].patch_ofs; - size = head->fw_desc[i].patch_entries; - ret = xc_patch(x, src, size); - if (ret < 0) - goto exit_release_firmware; - } - - ret = 0; - - exit_release_firmware: - release_firmware(fw); - - return ret; -} - -struct xc *request_xc(int xcno, struct device *dev) -{ - struct xc *x = NULL; - - mutex_lock(&xc_lock); - - if (xcno > 3) - goto exit; - if (xc_in_use & (1 << xcno)) - goto exit; - - x = kmalloc(sizeof (struct xc), GFP_KERNEL); - if (!x) - goto exit; - - if (!request_mem_region - (NETX_PA_XPEC(xcno), XPEC_MEM_SIZE, kobject_name(&dev->kobj))) - goto exit_free; - - if (!request_mem_region - (NETX_PA_XMAC(xcno), XMAC_MEM_SIZE, kobject_name(&dev->kobj))) - goto exit_release_1; - - if (!request_mem_region - (SRAM_INTERNAL_PHYS(xcno), SRAM_MEM_SIZE, kobject_name(&dev->kobj))) - goto exit_release_2; - - x->xpec_base = (void * __iomem)io_p2v(NETX_PA_XPEC(xcno)); - x->xmac_base = (void * __iomem)io_p2v(NETX_PA_XMAC(xcno)); - x->sram_base = ioremap(SRAM_INTERNAL_PHYS(xcno), SRAM_MEM_SIZE); - if (!x->sram_base) - goto exit_release_3; - - x->irq = NETX_IRQ_XPEC(xcno); - - x->no = xcno; - x->dev = dev; - - xc_in_use |= (1 << xcno); - - goto exit; - - exit_release_3: - release_mem_region(SRAM_INTERNAL_PHYS(xcno), SRAM_MEM_SIZE); - exit_release_2: - release_mem_region(NETX_PA_XMAC(xcno), XMAC_MEM_SIZE); - exit_release_1: - release_mem_region(NETX_PA_XPEC(xcno), XPEC_MEM_SIZE); - exit_free: - kfree(x); - x = NULL; - exit: - mutex_unlock(&xc_lock); - return x; -} - -void free_xc(struct xc *x) -{ - int xcno = x->no; - - mutex_lock(&xc_lock); - - iounmap(x->sram_base); - release_mem_region(SRAM_INTERNAL_PHYS(xcno), SRAM_MEM_SIZE); - release_mem_region(NETX_PA_XMAC(xcno), XMAC_MEM_SIZE); - release_mem_region(NETX_PA_XPEC(xcno), XPEC_MEM_SIZE); - xc_in_use &= ~(1 << x->no); - kfree(x); - - mutex_unlock(&xc_lock); -} - -EXPORT_SYMBOL(free_xc); -EXPORT_SYMBOL(request_xc); -EXPORT_SYMBOL(xc_request_firmware); -EXPORT_SYMBOL(xc_reset); -EXPORT_SYMBOL(xc_running); -EXPORT_SYMBOL(xc_start); -EXPORT_SYMBOL(xc_stop); diff --git a/arch/arm/mach-tegra/reset.c b/arch/arm/mach-tegra/reset.c index 5a67a71f80cc..76a65df42d10 100644 --- a/arch/arm/mach-tegra/reset.c +++ b/arch/arm/mach-tegra/reset.c @@ -70,7 +70,7 @@ static void __init tegra_cpu_reset_handler_enable(void) switch (err) { case -ENOSYS: tegra_cpu_reset_handler_set(reset_address); - /* pass-through */ + /* fall through */ case 0: is_enabled = true; break; diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 820b60a50125..c54cd7ed90ba 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -663,6 +663,11 @@ config ARM_LPAE depends on MMU && CPU_32v7 && !CPU_32v6 && !CPU_32v5 && \ !CPU_32v4 && !CPU_32v3 select PHYS_ADDR_T_64BIT + select SWIOTLB + select ARCH_HAS_DMA_COHERENT_TO_PFN + select ARCH_HAS_DMA_MMAP_PGPROT + select ARCH_HAS_SYNC_DMA_FOR_DEVICE + select ARCH_HAS_SYNC_DMA_FOR_CPU help Say Y if you have an ARMv7 processor supporting the LPAE page table format and you would like to access memory beyond the diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index 8cdb78642e93..04b36436cbc0 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -695,7 +695,7 @@ thumb2arm(u16 tinstr) return subset[(L<<1) | ((tinstr & (1<<8)) >> 8)] | (tinstr & 255); /* register_list */ } - /* Else fall through for illegal instruction case */ + /* Else, fall through - for illegal instruction case */ default: return BAD_INSTR; @@ -751,6 +751,8 @@ do_alignment_t32_to_handler(unsigned long *pinstr, struct pt_regs *regs, case 0xe8e0: case 0xe9e0: poffset->un = (tinst2 & 0xff) << 2; + /* Fall through */ + case 0xe940: case 0xe9c0: return do_alignment_ldrdstrd; diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 4789c60a86e3..6774b03aa405 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -15,6 +15,7 @@ #include <linux/init.h> #include <linux/device.h> #include <linux/dma-mapping.h> +#include <linux/dma-noncoherent.h> #include <linux/dma-contiguous.h> #include <linux/highmem.h> #include <linux/memblock.h> @@ -1125,6 +1126,19 @@ int arm_dma_supported(struct device *dev, u64 mask) static const struct dma_map_ops *arm_get_dma_map_ops(bool coherent) { + /* + * When CONFIG_ARM_LPAE is set, physical address can extend above + * 32-bits, which then can't be addressed by devices that only support + * 32-bit DMA. + * Use the generic dma-direct / swiotlb ops code in that case, as that + * handles bounce buffering for us. + * + * Note: this checks CONFIG_ARM_LPAE instead of CONFIG_SWIOTLB as the + * latter is also selected by the Xen code, but that code for now relies + * on non-NULL dev_dma_ops. To be cleaned up later. + */ + if (IS_ENABLED(CONFIG_ARM_LPAE)) + return NULL; return coherent ? &arm_coherent_dma_ops : &arm_dma_ops; } @@ -2329,6 +2343,9 @@ void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size, const struct dma_map_ops *dma_ops; dev->archdata.dma_coherent = coherent; +#ifdef CONFIG_SWIOTLB + dev->dma_coherent = coherent; +#endif /* * Don't override the dma_ops if they have already been set. Ideally @@ -2363,3 +2380,47 @@ void arch_teardown_dma_ops(struct device *dev) /* Let arch_setup_dma_ops() start again from scratch upon re-probe */ set_dma_ops(dev, NULL); } + +#ifdef CONFIG_SWIOTLB +void arch_sync_dma_for_device(struct device *dev, phys_addr_t paddr, + size_t size, enum dma_data_direction dir) +{ + __dma_page_cpu_to_dev(phys_to_page(paddr), paddr & (PAGE_SIZE - 1), + size, dir); +} + +void arch_sync_dma_for_cpu(struct device *dev, phys_addr_t paddr, + size_t size, enum dma_data_direction dir) +{ + __dma_page_dev_to_cpu(phys_to_page(paddr), paddr & (PAGE_SIZE - 1), + size, dir); +} + +long arch_dma_coherent_to_pfn(struct device *dev, void *cpu_addr, + dma_addr_t dma_addr) +{ + return dma_to_pfn(dev, dma_addr); +} + +pgprot_t arch_dma_mmap_pgprot(struct device *dev, pgprot_t prot, + unsigned long attrs) +{ + if (!dev_is_dma_coherent(dev)) + return __get_dma_pgprot(attrs, prot); + return prot; +} + +void *arch_dma_alloc(struct device *dev, size_t size, dma_addr_t *dma_handle, + gfp_t gfp, unsigned long attrs) +{ + return __dma_alloc(dev, size, dma_handle, gfp, + __get_dma_pgprot(attrs, PAGE_KERNEL), false, + attrs, __builtin_return_address(0)); +} + +void arch_dma_free(struct device *dev, size_t size, void *cpu_addr, + dma_addr_t dma_handle, unsigned long attrs) +{ + __arm_dma_free(dev, size, cpu_addr, dma_handle, attrs, false); +} +#endif /* CONFIG_SWIOTLB */ diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 4920a206dce9..16d373d587c4 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -21,6 +21,7 @@ #include <linux/dma-contiguous.h> #include <linux/sizes.h> #include <linux/stop_machine.h> +#include <linux/swiotlb.h> #include <asm/cp15.h> #include <asm/mach-types.h> @@ -463,6 +464,10 @@ static void __init free_highpages(void) */ void __init mem_init(void) { +#ifdef CONFIG_ARM_LPAE + swiotlb_init(1); +#endif + set_max_mapnr(pfn_to_page(max_pfn) - mem_map); /* this will put all unused low memory onto the freelists */ diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 79f43acf9acb..08c99413d02c 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -388,17 +388,15 @@ void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode) /* * not supported by current hardware on OMAP1 * w |= (0x03 << 7); - * fall through */ + /* fall through */ case OMAP_DMA_DATA_BURST_16: if (dma_omap2plus()) { burst = 0x3; break; } - /* - * OMAP1 don't support burst 16 - * fall through - */ + /* OMAP1 don't support burst 16 */ + /* fall through */ default: BUG(); } @@ -474,10 +472,8 @@ void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode) burst = 0x3; break; } - /* - * OMAP1 don't support burst 16 - * fall through - */ + /* OMAP1 don't support burst 16 */ + /* fall through */ default: printk(KERN_ERR "Invalid DMA burst mode\n"); BUG(); diff --git a/arch/arm64/Makefile b/arch/arm64/Makefile index bb1f1dbb34e8..61de992bbea3 100644 --- a/arch/arm64/Makefile +++ b/arch/arm64/Makefile @@ -52,7 +52,7 @@ ifeq ($(CONFIG_GENERIC_COMPAT_VDSO), y) ifeq ($(CONFIG_CC_IS_CLANG), y) $(warning CROSS_COMPILE_COMPAT is clang, the compat vDSO will not be built) - else ifeq ($(CROSS_COMPILE_COMPAT),) + else ifeq ($(strip $(CROSS_COMPILE_COMPAT)),) $(warning CROSS_COMPILE_COMPAT not defined or empty, the compat vDSO will not be built) else ifeq ($(shell which $(CROSS_COMPILE_COMPAT)gcc 2> /dev/null),) $(error $(CROSS_COMPILE_COMPAT)gcc not found, check CROSS_COMPILE_COMPAT) diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi index b05d78164fc1..144a2c19ac02 100644 --- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi @@ -302,6 +302,22 @@ status = "disabled"; }; + nand: nand@ffb90000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "altr,socfpga-denali-nand"; + reg = <0xffb90000 0x10000>, + <0xffb80000 0x1000>; + reg-names = "nand_data", "denali_reg"; + interrupts = <0 97 4>; + clocks = <&clkmgr STRATIX10_NAND_CLK>, + <&clkmgr STRATIX10_NAND_X_CLK>, + <&clkmgr STRATIX10_NAND_ECC_CLK>; + clock-names = "nand", "nand_x", "ecc"; + resets = <&rst NAND_RESET>, <&rst NAND_OCP_RESET>; + status = "disabled"; + }; + ocram: sram@ffe00000 { compatible = "mmio-sram"; reg = <0xffe00000 0x100000>; @@ -324,6 +340,8 @@ #dma-requests = <32>; clocks = <&clkmgr STRATIX10_L4_MAIN_CLK>; clock-names = "apb_pclk"; + resets = <&rst DMA_RESET>, <&rst DMA_OCP_RESET>; + reset-names = "dma", "dma-ocp"; }; rst: rstmgr@ffd11000 { diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index 07b861fe5fa5..edbf128e7707 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -3,6 +3,8 @@ dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-g12b-s922x-khadas-vim3.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nanopi-k2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nexbox-a95x.dtb @@ -32,3 +34,4 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi index 6219337033a0..12bf959c17a7 100644 --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi @@ -182,6 +182,8 @@ <&clkc CLKID_FCLK_DIV2>, <&clkc CLKID_MPLL2>; clock-names = "stmmaceth", "clkin0", "clkin1"; + rx-fifo-depth = <4096>; + tx-fifo-depth = <2048>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi new file mode 100644 index 000000000000..cd3d23d2c6a2 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi @@ -0,0 +1,2420 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 Amlogic, Inc. All rights reserved. + */ + +#include <dt-bindings/phy/phy.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clock/axg-audio-clkc.h> +#include <dt-bindings/clock/g12a-clkc.h> +#include <dt-bindings/clock/g12a-aoclkc.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h> +#include <dt-bindings/reset/amlogic,meson-g12a-reset.h> + +/ { + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + tdmif_a: audio-controller-0 { + compatible = "amlogic,axg-tdm-iface"; + #sound-dai-cells = <0>; + sound-name-prefix = "TDM_A"; + clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>, + <&clkc_audio AUD_CLKID_MST_A_SCLK>, + <&clkc_audio AUD_CLKID_MST_A_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; + status = "disabled"; + }; + + tdmif_b: audio-controller-1 { + compatible = "amlogic,axg-tdm-iface"; + #sound-dai-cells = <0>; + sound-name-prefix = "TDM_B"; + clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>, + <&clkc_audio AUD_CLKID_MST_B_SCLK>, + <&clkc_audio AUD_CLKID_MST_B_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; + status = "disabled"; + }; + + tdmif_c: audio-controller-2 { + compatible = "amlogic,axg-tdm-iface"; + #sound-dai-cells = <0>; + sound-name-prefix = "TDM_C"; + clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>, + <&clkc_audio AUD_CLKID_MST_C_SCLK>, + <&clkc_audio AUD_CLKID_MST_C_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; + status = "disabled"; + }; + + efuse: efuse { + compatible = "amlogic,meson-gxbb-efuse"; + clocks = <&clkc CLKID_EFUSE>; + #address-cells = <1>; + #size-cells = <1>; + read-only; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* 3 MiB reserved for ARM Trusted Firmware (BL31) */ + secmon_reserved: secmon@5000000 { + reg = <0x0 0x05000000 0x0 0x300000>; + no-map; + }; + + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x0 0x10000000>; + alignment = <0x0 0x400000>; + linux,cma-default; + }; + }; + + sm: secure-monitor { + compatible = "amlogic,meson-gxbb-sm"; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ethmac: ethernet@ff3f0000 { + compatible = "amlogic,meson-axg-dwmac", + "snps,dwmac-3.70a", + "snps,dwmac"; + reg = <0x0 0xff3f0000 0x0 0x10000 + 0x0 0xff634540 0x0 0x8>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + clocks = <&clkc CLKID_ETH>, + <&clkc CLKID_FCLK_DIV2>, + <&clkc CLKID_MPLL2>; + clock-names = "stmmaceth", "clkin0", "clkin1"; + rx-fifo-depth = <4096>; + tx-fifo-depth = <2048>; + status = "disabled"; + + mdio0: mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + }; + }; + + apb: bus@ff600000 { + compatible = "simple-bus"; + reg = <0x0 0xff600000 0x0 0x200000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xff600000 0x0 0x200000>; + + hdmi_tx: hdmi-tx@0 { + compatible = "amlogic,meson-g12a-dw-hdmi"; + reg = <0x0 0x0 0x0 0x10000>; + interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>; + resets = <&reset RESET_HDMITX_CAPB3>, + <&reset RESET_HDMITX_PHY>, + <&reset RESET_HDMITX>; + reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy"; + clocks = <&clkc CLKID_HDMI>, + <&clkc CLKID_HTX_PCLK>, + <&clkc CLKID_VPU_INTR>; + clock-names = "isfr", "iahb", "venci"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <0>; + status = "disabled"; + + /* VPU VENC Input */ + hdmi_tx_venc_port: port@0 { + reg = <0>; + + hdmi_tx_in: endpoint { + remote-endpoint = <&hdmi_tx_out>; + }; + }; + + /* TMDS Output */ + hdmi_tx_tmds_port: port@1 { + reg = <1>; + }; + }; + + apb_efuse: bus@30000 { + compatible = "simple-bus"; + reg = <0x0 0x30000 0x0 0x2000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x30000 0x0 0x2000>; + + hwrng: rng@218 { + compatible = "amlogic,meson-rng"; + reg = <0x0 0x218 0x0 0x4>; + }; + }; + + periphs: bus@34400 { + compatible = "simple-bus"; + reg = <0x0 0x34400 0x0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x34400 0x0 0x400>; + + periphs_pinctrl: pinctrl@40 { + compatible = "amlogic,meson-g12a-periphs-pinctrl"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio: bank@40 { + reg = <0x0 0x40 0x0 0x4c>, + <0x0 0xe8 0x0 0x18>, + <0x0 0x120 0x0 0x18>, + <0x0 0x2c0 0x0 0x40>, + <0x0 0x340 0x0 0x1c>; + reg-names = "gpio", + "pull", + "pull-enable", + "mux", + "ds"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&periphs_pinctrl 0 0 86>; + }; + + cec_ao_a_h_pins: cec_ao_a_h { + mux { + groups = "cec_ao_a_h"; + function = "cec_ao_a_h"; + bias-disable; + }; + }; + + cec_ao_b_h_pins: cec_ao_b_h { + mux { + groups = "cec_ao_b_h"; + function = "cec_ao_b_h"; + bias-disable; + }; + }; + + emmc_pins: emmc { + mux-0 { + groups = "emmc_nand_d0", + "emmc_nand_d1", + "emmc_nand_d2", + "emmc_nand_d3", + "emmc_nand_d4", + "emmc_nand_d5", + "emmc_nand_d6", + "emmc_nand_d7", + "emmc_cmd"; + function = "emmc"; + bias-pull-up; + drive-strength-microamp = <4000>; + }; + + mux-1 { + groups = "emmc_clk"; + function = "emmc"; + bias-disable; + drive-strength-microamp = <4000>; + }; + }; + + emmc_ds_pins: emmc-ds { + mux { + groups = "emmc_nand_ds"; + function = "emmc"; + bias-pull-down; + drive-strength-microamp = <4000>; + }; + }; + + emmc_clk_gate_pins: emmc_clk_gate { + mux { + groups = "BOOT_8"; + function = "gpio_periphs"; + bias-pull-down; + drive-strength-microamp = <4000>; + }; + }; + + hdmitx_ddc_pins: hdmitx_ddc { + mux { + groups = "hdmitx_sda", + "hdmitx_sck"; + function = "hdmitx"; + bias-disable; + drive-strength-microamp = <4000>; + }; + }; + + hdmitx_hpd_pins: hdmitx_hpd { + mux { + groups = "hdmitx_hpd_in"; + function = "hdmitx"; + bias-disable; + }; + }; + + + i2c0_sda_c_pins: i2c0-sda-c { + mux { + groups = "i2c0_sda_c"; + function = "i2c0"; + bias-disable; + drive-strength-microamp = <3000>; + + }; + }; + + i2c0_sck_c_pins: i2c0-sck-c { + mux { + groups = "i2c0_sck_c"; + function = "i2c0"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c0_sda_z0_pins: i2c0-sda-z0 { + mux { + groups = "i2c0_sda_z0"; + function = "i2c0"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c0_sck_z1_pins: i2c0-sck-z1 { + mux { + groups = "i2c0_sck_z1"; + function = "i2c0"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c0_sda_z7_pins: i2c0-sda-z7 { + mux { + groups = "i2c0_sda_z7"; + function = "i2c0"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c0_sda_z8_pins: i2c0-sda-z8 { + mux { + groups = "i2c0_sda_z8"; + function = "i2c0"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c1_sda_x_pins: i2c1-sda-x { + mux { + groups = "i2c1_sda_x"; + function = "i2c1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c1_sck_x_pins: i2c1-sck-x { + mux { + groups = "i2c1_sck_x"; + function = "i2c1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c1_sda_h2_pins: i2c1-sda-h2 { + mux { + groups = "i2c1_sda_h2"; + function = "i2c1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c1_sck_h3_pins: i2c1-sck-h3 { + mux { + groups = "i2c1_sck_h3"; + function = "i2c1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c1_sda_h6_pins: i2c1-sda-h6 { + mux { + groups = "i2c1_sda_h6"; + function = "i2c1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c1_sck_h7_pins: i2c1-sck-h7 { + mux { + groups = "i2c1_sck_h7"; + function = "i2c1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c2_sda_x_pins: i2c2-sda-x { + mux { + groups = "i2c2_sda_x"; + function = "i2c2"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c2_sck_x_pins: i2c2-sck-x { + mux { + groups = "i2c2_sck_x"; + function = "i2c2"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c2_sda_z_pins: i2c2-sda-z { + mux { + groups = "i2c2_sda_z"; + function = "i2c2"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c2_sck_z_pins: i2c2-sck-z { + mux { + groups = "i2c2_sck_z"; + function = "i2c2"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c3_sda_h_pins: i2c3-sda-h { + mux { + groups = "i2c3_sda_h"; + function = "i2c3"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c3_sck_h_pins: i2c3-sck-h { + mux { + groups = "i2c3_sck_h"; + function = "i2c3"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c3_sda_a_pins: i2c3-sda-a { + mux { + groups = "i2c3_sda_a"; + function = "i2c3"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c3_sck_a_pins: i2c3-sck-a { + mux { + groups = "i2c3_sck_a"; + function = "i2c3"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + mclk0_a_pins: mclk0-a { + mux { + groups = "mclk0_a"; + function = "mclk0"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + mclk1_a_pins: mclk1-a { + mux { + groups = "mclk1_a"; + function = "mclk1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + mclk1_x_pins: mclk1-x { + mux { + groups = "mclk1_x"; + function = "mclk1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + mclk1_z_pins: mclk1-z { + mux { + groups = "mclk1_z"; + function = "mclk1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + pdm_din0_a_pins: pdm-din0-a { + mux { + groups = "pdm_din0_a"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din0_c_pins: pdm-din0-c { + mux { + groups = "pdm_din0_c"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din0_x_pins: pdm-din0-x { + mux { + groups = "pdm_din0_x"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din0_z_pins: pdm-din0-z { + mux { + groups = "pdm_din0_z"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din1_a_pins: pdm-din1-a { + mux { + groups = "pdm_din1_a"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din1_c_pins: pdm-din1-c { + mux { + groups = "pdm_din1_c"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din1_x_pins: pdm-din1-x { + mux { + groups = "pdm_din1_x"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din1_z_pins: pdm-din1-z { + mux { + groups = "pdm_din1_z"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din2_a_pins: pdm-din2-a { + mux { + groups = "pdm_din2_a"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din2_c_pins: pdm-din2-c { + mux { + groups = "pdm_din2_c"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din2_x_pins: pdm-din2-x { + mux { + groups = "pdm_din2_x"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din2_z_pins: pdm-din2-z { + mux { + groups = "pdm_din2_z"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din3_a_pins: pdm-din3-a { + mux { + groups = "pdm_din3_a"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din3_c_pins: pdm-din3-c { + mux { + groups = "pdm_din3_c"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din3_x_pins: pdm-din3-x { + mux { + groups = "pdm_din3_x"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din3_z_pins: pdm-din3-z { + mux { + groups = "pdm_din3_z"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_dclk_a_pins: pdm-dclk-a { + mux { + groups = "pdm_dclk_a"; + function = "pdm"; + bias-disable; + drive-strength-microamp = <500>; + }; + }; + + pdm_dclk_c_pins: pdm-dclk-c { + mux { + groups = "pdm_dclk_c"; + function = "pdm"; + bias-disable; + drive-strength-microamp = <500>; + }; + }; + + pdm_dclk_x_pins: pdm-dclk-x { + mux { + groups = "pdm_dclk_x"; + function = "pdm"; + bias-disable; + drive-strength-microamp = <500>; + }; + }; + + pdm_dclk_z_pins: pdm-dclk-z { + mux { + groups = "pdm_dclk_z"; + function = "pdm"; + bias-disable; + drive-strength-microamp = <500>; + }; + }; + + pwm_a_pins: pwm-a { + mux { + groups = "pwm_a"; + function = "pwm_a"; + bias-disable; + }; + }; + + pwm_b_x7_pins: pwm-b-x7 { + mux { + groups = "pwm_b_x7"; + function = "pwm_b"; + bias-disable; + }; + }; + + pwm_b_x19_pins: pwm-b-x19 { + mux { + groups = "pwm_b_x19"; + function = "pwm_b"; + bias-disable; + }; + }; + + pwm_c_c_pins: pwm-c-c { + mux { + groups = "pwm_c_c"; + function = "pwm_c"; + bias-disable; + }; + }; + + pwm_c_x5_pins: pwm-c-x5 { + mux { + groups = "pwm_c_x5"; + function = "pwm_c"; + bias-disable; + }; + }; + + pwm_c_x8_pins: pwm-c-x8 { + mux { + groups = "pwm_c_x8"; + function = "pwm_c"; + bias-disable; + }; + }; + + pwm_d_x3_pins: pwm-d-x3 { + mux { + groups = "pwm_d_x3"; + function = "pwm_d"; + bias-disable; + }; + }; + + pwm_d_x6_pins: pwm-d-x6 { + mux { + groups = "pwm_d_x6"; + function = "pwm_d"; + bias-disable; + }; + }; + + pwm_e_pins: pwm-e { + mux { + groups = "pwm_e"; + function = "pwm_e"; + bias-disable; + }; + }; + + pwm_f_x_pins: pwm-f-x { + mux { + groups = "pwm_f_x"; + function = "pwm_f"; + bias-disable; + }; + }; + + pwm_f_h_pins: pwm-f-h { + mux { + groups = "pwm_f_h"; + function = "pwm_f"; + bias-disable; + }; + }; + + sdcard_c_pins: sdcard_c { + mux-0 { + groups = "sdcard_d0_c", + "sdcard_d1_c", + "sdcard_d2_c", + "sdcard_d3_c", + "sdcard_cmd_c"; + function = "sdcard"; + bias-pull-up; + drive-strength-microamp = <4000>; + }; + + mux-1 { + groups = "sdcard_clk_c"; + function = "sdcard"; + bias-disable; + drive-strength-microamp = <4000>; + }; + }; + + sdcard_clk_gate_c_pins: sdcard_clk_gate_c { + mux { + groups = "GPIOC_4"; + function = "gpio_periphs"; + bias-pull-down; + drive-strength-microamp = <4000>; + }; + }; + + sdcard_z_pins: sdcard_z { + mux-0 { + groups = "sdcard_d0_z", + "sdcard_d1_z", + "sdcard_d2_z", + "sdcard_d3_z", + "sdcard_cmd_z"; + function = "sdcard"; + bias-pull-up; + drive-strength-microamp = <4000>; + }; + + mux-1 { + groups = "sdcard_clk_z"; + function = "sdcard"; + bias-disable; + drive-strength-microamp = <4000>; + }; + }; + + sdcard_clk_gate_z_pins: sdcard_clk_gate_z { + mux { + groups = "GPIOZ_6"; + function = "gpio_periphs"; + bias-pull-down; + drive-strength-microamp = <4000>; + }; + }; + + sdio_pins: sdio { + mux { + groups = "sdio_d0", + "sdio_d1", + "sdio_d2", + "sdio_d3", + "sdio_clk", + "sdio_cmd"; + function = "sdio"; + bias-disable; + drive-strength-microamp = <4000>; + }; + }; + + sdio_clk_gate_pins: sdio_clk_gate { + mux { + groups = "GPIOX_4"; + function = "gpio_periphs"; + bias-pull-down; + drive-strength-microamp = <4000>; + }; + }; + + spdif_in_a10_pins: spdif-in-a10 { + mux { + groups = "spdif_in_a10"; + function = "spdif_in"; + bias-disable; + }; + }; + + spdif_in_a12_pins: spdif-in-a12 { + mux { + groups = "spdif_in_a12"; + function = "spdif_in"; + bias-disable; + }; + }; + + spdif_in_h_pins: spdif-in-h { + mux { + groups = "spdif_in_h"; + function = "spdif_in"; + bias-disable; + }; + }; + + spdif_out_h_pins: spdif-out-h { + mux { + groups = "spdif_out_h"; + function = "spdif_out"; + drive-strength-microamp = <500>; + bias-disable; + }; + }; + + spdif_out_a11_pins: spdif-out-a11 { + mux { + groups = "spdif_out_a11"; + function = "spdif_out"; + drive-strength-microamp = <500>; + bias-disable; + }; + }; + + spdif_out_a13_pins: spdif-out-a13 { + mux { + groups = "spdif_out_a13"; + function = "spdif_out"; + drive-strength-microamp = <500>; + bias-disable; + }; + }; + + tdm_a_din0_pins: tdm-a-din0 { + mux { + groups = "tdm_a_din0"; + function = "tdm_a"; + bias-disable; + }; + }; + + + tdm_a_din1_pins: tdm-a-din1 { + mux { + groups = "tdm_a_din1"; + function = "tdm_a"; + bias-disable; + }; + }; + + tdm_a_dout0_pins: tdm-a-dout0 { + mux { + groups = "tdm_a_dout0"; + function = "tdm_a"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_a_dout1_pins: tdm-a-dout1 { + mux { + groups = "tdm_a_dout1"; + function = "tdm_a"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_a_fs_pins: tdm-a-fs { + mux { + groups = "tdm_a_fs"; + function = "tdm_a"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_a_sclk_pins: tdm-a-sclk { + mux { + groups = "tdm_a_sclk"; + function = "tdm_a"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_a_slv_fs_pins: tdm-a-slv-fs { + mux { + groups = "tdm_a_slv_fs"; + function = "tdm_a"; + bias-disable; + }; + }; + + + tdm_a_slv_sclk_pins: tdm-a-slv-sclk { + mux { + groups = "tdm_a_slv_sclk"; + function = "tdm_a"; + bias-disable; + }; + }; + + tdm_b_din0_pins: tdm-b-din0 { + mux { + groups = "tdm_b_din0"; + function = "tdm_b"; + bias-disable; + }; + }; + + tdm_b_din1_pins: tdm-b-din1 { + mux { + groups = "tdm_b_din1"; + function = "tdm_b"; + bias-disable; + }; + }; + + tdm_b_din2_pins: tdm-b-din2 { + mux { + groups = "tdm_b_din2"; + function = "tdm_b"; + bias-disable; + }; + }; + + tdm_b_din3_a_pins: tdm-b-din3-a { + mux { + groups = "tdm_b_din3_a"; + function = "tdm_b"; + bias-disable; + }; + }; + + tdm_b_din3_h_pins: tdm-b-din3-h { + mux { + groups = "tdm_b_din3_h"; + function = "tdm_b"; + bias-disable; + }; + }; + + tdm_b_dout0_pins: tdm-b-dout0 { + mux { + groups = "tdm_b_dout0"; + function = "tdm_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_b_dout1_pins: tdm-b-dout1 { + mux { + groups = "tdm_b_dout1"; + function = "tdm_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_b_dout2_pins: tdm-b-dout2 { + mux { + groups = "tdm_b_dout2"; + function = "tdm_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_b_dout3_a_pins: tdm-b-dout3-a { + mux { + groups = "tdm_b_dout3_a"; + function = "tdm_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_b_dout3_h_pins: tdm-b-dout3-h { + mux { + groups = "tdm_b_dout3_h"; + function = "tdm_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_b_fs_pins: tdm-b-fs { + mux { + groups = "tdm_b_fs"; + function = "tdm_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_b_sclk_pins: tdm-b-sclk { + mux { + groups = "tdm_b_sclk"; + function = "tdm_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_b_slv_fs_pins: tdm-b-slv-fs { + mux { + groups = "tdm_b_slv_fs"; + function = "tdm_b"; + bias-disable; + }; + }; + + tdm_b_slv_sclk_pins: tdm-b-slv-sclk { + mux { + groups = "tdm_b_slv_sclk"; + function = "tdm_b"; + bias-disable; + }; + }; + + tdm_c_din0_a_pins: tdm-c-din0-a { + mux { + groups = "tdm_c_din0_a"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_din0_z_pins: tdm-c-din0-z { + mux { + groups = "tdm_c_din0_z"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_din1_a_pins: tdm-c-din1-a { + mux { + groups = "tdm_c_din1_a"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_din1_z_pins: tdm-c-din1-z { + mux { + groups = "tdm_c_din1_z"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_din2_a_pins: tdm-c-din2-a { + mux { + groups = "tdm_c_din2_a"; + function = "tdm_c"; + bias-disable; + }; + }; + + eth_leds_pins: eth-leds { + mux { + groups = "eth_link_led", + "eth_act_led"; + function = "eth"; + bias-disable; + }; + }; + + eth_pins: eth { + mux { + groups = "eth_mdio", + "eth_mdc", + "eth_rgmii_rx_clk", + "eth_rx_dv", + "eth_rxd0", + "eth_rxd1", + "eth_txen", + "eth_txd0", + "eth_txd1"; + function = "eth"; + drive-strength-microamp = <4000>; + bias-disable; + }; + }; + + eth_rgmii_pins: eth-rgmii { + mux { + groups = "eth_rxd2_rgmii", + "eth_rxd3_rgmii", + "eth_rgmii_tx_clk", + "eth_txd2_rgmii", + "eth_txd3_rgmii"; + function = "eth"; + drive-strength-microamp = <4000>; + bias-disable; + }; + }; + + tdm_c_din2_z_pins: tdm-c-din2-z { + mux { + groups = "tdm_c_din2_z"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_din3_a_pins: tdm-c-din3-a { + mux { + groups = "tdm_c_din3_a"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_din3_z_pins: tdm-c-din3-z { + mux { + groups = "tdm_c_din3_z"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_dout0_a_pins: tdm-c-dout0-a { + mux { + groups = "tdm_c_dout0_a"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_dout0_z_pins: tdm-c-dout0-z { + mux { + groups = "tdm_c_dout0_z"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_dout1_a_pins: tdm-c-dout1-a { + mux { + groups = "tdm_c_dout1_a"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_dout1_z_pins: tdm-c-dout1-z { + mux { + groups = "tdm_c_dout1_z"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_dout2_a_pins: tdm-c-dout2-a { + mux { + groups = "tdm_c_dout2_a"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_dout2_z_pins: tdm-c-dout2-z { + mux { + groups = "tdm_c_dout2_z"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_dout3_a_pins: tdm-c-dout3-a { + mux { + groups = "tdm_c_dout3_a"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_dout3_z_pins: tdm-c-dout3-z { + mux { + groups = "tdm_c_dout3_z"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_fs_a_pins: tdm-c-fs-a { + mux { + groups = "tdm_c_fs_a"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_fs_z_pins: tdm-c-fs-z { + mux { + groups = "tdm_c_fs_z"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_sclk_a_pins: tdm-c-sclk-a { + mux { + groups = "tdm_c_sclk_a"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_sclk_z_pins: tdm-c-sclk-z { + mux { + groups = "tdm_c_sclk_z"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_slv_fs_a_pins: tdm-c-slv-fs-a { + mux { + groups = "tdm_c_slv_fs_a"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_slv_fs_z_pins: tdm-c-slv-fs-z { + mux { + groups = "tdm_c_slv_fs_z"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_slv_sclk_a_pins: tdm-c-slv-sclk-a { + mux { + groups = "tdm_c_slv_sclk_a"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_slv_sclk_z_pins: tdm-c-slv-sclk-z { + mux { + groups = "tdm_c_slv_sclk_z"; + function = "tdm_c"; + bias-disable; + }; + }; + + uart_a_pins: uart-a { + mux { + groups = "uart_a_tx", + "uart_a_rx"; + function = "uart_a"; + bias-disable; + }; + }; + + uart_a_cts_rts_pins: uart-a-cts-rts { + mux { + groups = "uart_a_cts", + "uart_a_rts"; + function = "uart_a"; + bias-disable; + }; + }; + + uart_b_pins: uart-b { + mux { + groups = "uart_b_tx", + "uart_b_rx"; + function = "uart_b"; + bias-disable; + }; + }; + + uart_c_pins: uart-c { + mux { + groups = "uart_c_tx", + "uart_c_rx"; + function = "uart_c"; + bias-disable; + }; + }; + + uart_c_cts_rts_pins: uart-c-cts-rts { + mux { + groups = "uart_c_cts", + "uart_c_rts"; + function = "uart_c"; + bias-disable; + }; + }; + }; + }; + + usb2_phy0: phy@36000 { + compatible = "amlogic,g12a-usb2-phy"; + reg = <0x0 0x36000 0x0 0x2000>; + clocks = <&xtal>; + clock-names = "xtal"; + resets = <&reset RESET_USB_PHY20>; + reset-names = "phy"; + #phy-cells = <0>; + }; + + dmc: bus@38000 { + compatible = "simple-bus"; + reg = <0x0 0x38000 0x0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x38000 0x0 0x400>; + + canvas: video-lut@48 { + compatible = "amlogic,canvas"; + reg = <0x0 0x48 0x0 0x14>; + }; + }; + + usb2_phy1: phy@3a000 { + compatible = "amlogic,g12a-usb2-phy"; + reg = <0x0 0x3a000 0x0 0x2000>; + clocks = <&xtal>; + clock-names = "xtal"; + resets = <&reset RESET_USB_PHY21>; + reset-names = "phy"; + #phy-cells = <0>; + }; + + hiu: bus@3c000 { + compatible = "simple-bus"; + reg = <0x0 0x3c000 0x0 0x1400>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x3c000 0x0 0x1400>; + + hhi: system-controller@0 { + compatible = "amlogic,meson-gx-hhi-sysctrl", + "simple-mfd", "syscon"; + reg = <0 0 0 0x400>; + + clkc: clock-controller { + compatible = "amlogic,g12a-clkc"; + #clock-cells = <1>; + clocks = <&xtal>; + clock-names = "xtal"; + }; + }; + }; + + pdm: audio-controller@40000 { + compatible = "amlogic,g12a-pdm", + "amlogic,axg-pdm"; + reg = <0x0 0x40000 0x0 0x34>; + #sound-dai-cells = <0>; + sound-name-prefix = "PDM"; + clocks = <&clkc_audio AUD_CLKID_PDM>, + <&clkc_audio AUD_CLKID_PDM_DCLK>, + <&clkc_audio AUD_CLKID_PDM_SYSCLK>; + clock-names = "pclk", "dclk", "sysclk"; + status = "disabled"; + }; + + audio: bus@42000 { + compatible = "simple-bus"; + reg = <0x0 0x42000 0x0 0x2000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x42000 0x0 0x2000>; + + clkc_audio: clock-controller@0 { + status = "disabled"; + compatible = "amlogic,g12a-audio-clkc"; + reg = <0x0 0x0 0x0 0xb4>; + #clock-cells = <1>; + + clocks = <&clkc CLKID_AUDIO>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL3>, + <&clkc CLKID_HIFI_PLL>, + <&clkc CLKID_FCLK_DIV3>, + <&clkc CLKID_FCLK_DIV4>, + <&clkc CLKID_GP0_PLL>; + clock-names = "pclk", + "mst_in0", + "mst_in1", + "mst_in2", + "mst_in3", + "mst_in4", + "mst_in5", + "mst_in6", + "mst_in7"; + + resets = <&reset RESET_AUDIO>; + }; + + toddr_a: audio-controller@100 { + compatible = "amlogic,g12a-toddr", + "amlogic,axg-toddr"; + reg = <0x0 0x100 0x0 0x1c>; + #sound-dai-cells = <0>; + sound-name-prefix = "TODDR_A"; + interrupts = <GIC_SPI 148 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_TODDR_A>; + resets = <&arb AXG_ARB_TODDR_A>; + status = "disabled"; + }; + + toddr_b: audio-controller@140 { + compatible = "amlogic,g12a-toddr", + "amlogic,axg-toddr"; + reg = <0x0 0x140 0x0 0x1c>; + #sound-dai-cells = <0>; + sound-name-prefix = "TODDR_B"; + interrupts = <GIC_SPI 149 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_TODDR_B>; + resets = <&arb AXG_ARB_TODDR_B>; + status = "disabled"; + }; + + toddr_c: audio-controller@180 { + compatible = "amlogic,g12a-toddr", + "amlogic,axg-toddr"; + reg = <0x0 0x180 0x0 0x1c>; + #sound-dai-cells = <0>; + sound-name-prefix = "TODDR_C"; + interrupts = <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_TODDR_C>; + resets = <&arb AXG_ARB_TODDR_C>; + status = "disabled"; + }; + + frddr_a: audio-controller@1c0 { + compatible = "amlogic,g12a-frddr", + "amlogic,axg-frddr"; + reg = <0x0 0x1c0 0x0 0x1c>; + #sound-dai-cells = <0>; + sound-name-prefix = "FRDDR_A"; + interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_FRDDR_A>; + resets = <&arb AXG_ARB_FRDDR_A>; + status = "disabled"; + }; + + frddr_b: audio-controller@200 { + compatible = "amlogic,g12a-frddr", + "amlogic,axg-frddr"; + reg = <0x0 0x200 0x0 0x1c>; + #sound-dai-cells = <0>; + sound-name-prefix = "FRDDR_B"; + interrupts = <GIC_SPI 153 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_FRDDR_B>; + resets = <&arb AXG_ARB_FRDDR_B>; + status = "disabled"; + }; + + frddr_c: audio-controller@240 { + compatible = "amlogic,g12a-frddr", + "amlogic,axg-frddr"; + reg = <0x0 0x240 0x0 0x1c>; + #sound-dai-cells = <0>; + sound-name-prefix = "FRDDR_C"; + interrupts = <GIC_SPI 154 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_FRDDR_C>; + resets = <&arb AXG_ARB_FRDDR_C>; + status = "disabled"; + }; + + arb: reset-controller@280 { + status = "disabled"; + compatible = "amlogic,meson-axg-audio-arb"; + reg = <0x0 0x280 0x0 0x4>; + #reset-cells = <1>; + clocks = <&clkc_audio AUD_CLKID_DDR_ARB>; + }; + + tdmin_a: audio-controller@300 { + compatible = "amlogic,g12a-tdmin", + "amlogic,axg-tdmin"; + reg = <0x0 0x300 0x0 0x40>; + sound-name-prefix = "TDMIN_A"; + clocks = <&clkc_audio AUD_CLKID_TDMIN_A>, + <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmin_b: audio-controller@340 { + compatible = "amlogic,g12a-tdmin", + "amlogic,axg-tdmin"; + reg = <0x0 0x340 0x0 0x40>; + sound-name-prefix = "TDMIN_B"; + clocks = <&clkc_audio AUD_CLKID_TDMIN_B>, + <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmin_c: audio-controller@380 { + compatible = "amlogic,g12a-tdmin", + "amlogic,axg-tdmin"; + reg = <0x0 0x380 0x0 0x40>; + sound-name-prefix = "TDMIN_C"; + clocks = <&clkc_audio AUD_CLKID_TDMIN_C>, + <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmin_lb: audio-controller@3c0 { + compatible = "amlogic,g12a-tdmin", + "amlogic,axg-tdmin"; + reg = <0x0 0x3c0 0x0 0x40>; + sound-name-prefix = "TDMIN_LB"; + clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>, + <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + spdifin: audio-controller@400 { + compatible = "amlogic,g12a-spdifin", + "amlogic,axg-spdifin"; + reg = <0x0 0x400 0x0 0x30>; + #sound-dai-cells = <0>; + sound-name-prefix = "SPDIFIN"; + interrupts = <GIC_SPI 151 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_SPDIFIN>, + <&clkc_audio AUD_CLKID_SPDIFIN_CLK>; + clock-names = "pclk", "refclk"; + status = "disabled"; + }; + + spdifout: audio-controller@480 { + compatible = "amlogic,g12a-spdifout", + "amlogic,axg-spdifout"; + reg = <0x0 0x480 0x0 0x50>; + #sound-dai-cells = <0>; + sound-name-prefix = "SPDIFOUT"; + clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>, + <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>; + clock-names = "pclk", "mclk"; + status = "disabled"; + }; + + tdmout_a: audio-controller@500 { + compatible = "amlogic,g12a-tdmout"; + reg = <0x0 0x500 0x0 0x40>; + sound-name-prefix = "TDMOUT_A"; + clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>, + <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmout_b: audio-controller@540 { + compatible = "amlogic,g12a-tdmout"; + reg = <0x0 0x540 0x0 0x40>; + sound-name-prefix = "TDMOUT_B"; + clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>, + <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmout_c: audio-controller@580 { + compatible = "amlogic,g12a-tdmout"; + reg = <0x0 0x580 0x0 0x40>; + sound-name-prefix = "TDMOUT_C"; + clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>, + <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + spdifout_b: audio-controller@680 { + compatible = "amlogic,g12a-spdifout", + "amlogic,axg-spdifout"; + reg = <0x0 0x680 0x0 0x50>; + #sound-dai-cells = <0>; + sound-name-prefix = "SPDIFOUT_B"; + clocks = <&clkc_audio AUD_CLKID_SPDIFOUT_B>, + <&clkc_audio AUD_CLKID_SPDIFOUT_B_CLK>; + clock-names = "pclk", "mclk"; + status = "disabled"; + }; + + tohdmitx: audio-controller@744 { + compatible = "amlogic,g12a-tohdmitx"; + reg = <0x0 0x744 0x0 0x4>; + #sound-dai-cells = <1>; + sound-name-prefix = "TOHDMITX"; + status = "disabled"; + }; + }; + + usb3_pcie_phy: phy@46000 { + compatible = "amlogic,g12a-usb3-pcie-phy"; + reg = <0x0 0x46000 0x0 0x2000>; + clocks = <&clkc CLKID_PCIE_PLL>; + clock-names = "ref_clk"; + resets = <&reset RESET_PCIE_PHY>; + reset-names = "phy"; + assigned-clocks = <&clkc CLKID_PCIE_PLL>; + assigned-clock-rates = <100000000>; + #phy-cells = <1>; + }; + + eth_phy: mdio-multiplexer@4c000 { + compatible = "amlogic,g12a-mdio-mux"; + reg = <0x0 0x4c000 0x0 0xa4>; + clocks = <&clkc CLKID_ETH_PHY>, + <&xtal>, + <&clkc CLKID_MPLL_50M>; + clock-names = "pclk", "clkin0", "clkin1"; + mdio-parent-bus = <&mdio0>; + #address-cells = <1>; + #size-cells = <0>; + + ext_mdio: mdio@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + int_mdio: mdio@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + internal_ephy: ethernet_phy@8 { + compatible = "ethernet-phy-id0180.3301", + "ethernet-phy-ieee802.3-c22"; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg = <8>; + max-speed = <100>; + }; + }; + }; + }; + + aobus: bus@ff800000 { + compatible = "simple-bus"; + reg = <0x0 0xff800000 0x0 0x100000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>; + + rti: sys-ctrl@0 { + compatible = "amlogic,meson-gx-ao-sysctrl", + "simple-mfd", "syscon"; + reg = <0x0 0x0 0x0 0x100>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x0 0x0 0x100>; + + clkc_AO: clock-controller { + compatible = "amlogic,meson-g12a-aoclkc"; + #clock-cells = <1>; + #reset-cells = <1>; + clocks = <&xtal>, <&clkc CLKID_CLK81>; + clock-names = "xtal", "mpeg-clk"; + }; + + pwrc_vpu: power-controller-vpu { + compatible = "amlogic,meson-g12a-pwrc-vpu"; + #power-domain-cells = <0>; + amlogic,hhi-sysctrl = <&hhi>; + resets = <&reset RESET_VIU>, + <&reset RESET_VENC>, + <&reset RESET_VCBUS>, + <&reset RESET_BT656>, + <&reset RESET_RDMA>, + <&reset RESET_VENCI>, + <&reset RESET_VENCP>, + <&reset RESET_VDAC>, + <&reset RESET_VDI6>, + <&reset RESET_VENCL>, + <&reset RESET_VID_LOCK>; + clocks = <&clkc CLKID_VPU>, + <&clkc CLKID_VAPB>; + clock-names = "vpu", "vapb"; + /* + * VPU clocking is provided by two identical clock paths + * VPU_0 and VPU_1 muxed to a single clock by a glitch + * free mux to safely change frequency while running. + * Same for VAPB but with a final gate after the glitch free mux. + */ + assigned-clocks = <&clkc CLKID_VPU_0_SEL>, + <&clkc CLKID_VPU_0>, + <&clkc CLKID_VPU>, /* Glitch free mux */ + <&clkc CLKID_VAPB_0_SEL>, + <&clkc CLKID_VAPB_0>, + <&clkc CLKID_VAPB_SEL>; /* Glitch free mux */ + assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>, + <0>, /* Do Nothing */ + <&clkc CLKID_VPU_0>, + <&clkc CLKID_FCLK_DIV4>, + <0>, /* Do Nothing */ + <&clkc CLKID_VAPB_0>; + assigned-clock-rates = <0>, /* Do Nothing */ + <666666666>, + <0>, /* Do Nothing */ + <0>, /* Do Nothing */ + <250000000>, + <0>; /* Do Nothing */ + }; + + ao_pinctrl: pinctrl@14 { + compatible = "amlogic,meson-g12a-aobus-pinctrl"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio_ao: bank@14 { + reg = <0x0 0x14 0x0 0x8>, + <0x0 0x1c 0x0 0x8>, + <0x0 0x24 0x0 0x14>; + reg-names = "mux", + "ds", + "gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&ao_pinctrl 0 0 15>; + }; + + i2c_ao_sck_pins: i2c_ao_sck_pins { + mux { + groups = "i2c_ao_sck"; + function = "i2c_ao"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c_ao_sda_pins: i2c_ao_sda { + mux { + groups = "i2c_ao_sda"; + function = "i2c_ao"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c_ao_sck_e_pins: i2c_ao_sck_e { + mux { + groups = "i2c_ao_sck_e"; + function = "i2c_ao"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c_ao_sda_e_pins: i2c_ao_sda_e { + mux { + groups = "i2c_ao_sda_e"; + function = "i2c_ao"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + mclk0_ao_pins: mclk0-ao { + mux { + groups = "mclk0_ao"; + function = "mclk0_ao"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_ao_b_din0_pins: tdm-ao-b-din0 { + mux { + groups = "tdm_ao_b_din0"; + function = "tdm_ao_b"; + bias-disable; + }; + }; + + spdif_ao_out_pins: spdif-ao-out { + mux { + groups = "spdif_ao_out"; + function = "spdif_ao_out"; + drive-strength-microamp = <500>; + bias-disable; + }; + }; + + tdm_ao_b_din1_pins: tdm-ao-b-din1 { + mux { + groups = "tdm_ao_b_din1"; + function = "tdm_ao_b"; + bias-disable; + }; + }; + + tdm_ao_b_din2_pins: tdm-ao-b-din2 { + mux { + groups = "tdm_ao_b_din2"; + function = "tdm_ao_b"; + bias-disable; + }; + }; + + tdm_ao_b_dout0_pins: tdm-ao-b-dout0 { + mux { + groups = "tdm_ao_b_dout0"; + function = "tdm_ao_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_ao_b_dout1_pins: tdm-ao-b-dout1 { + mux { + groups = "tdm_ao_b_dout1"; + function = "tdm_ao_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_ao_b_dout2_pins: tdm-ao-b-dout2 { + mux { + groups = "tdm_ao_b_dout2"; + function = "tdm_ao_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_ao_b_fs_pins: tdm-ao-b-fs { + mux { + groups = "tdm_ao_b_fs"; + function = "tdm_ao_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_ao_b_sclk_pins: tdm-ao-b-sclk { + mux { + groups = "tdm_ao_b_sclk"; + function = "tdm_ao_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_ao_b_slv_fs_pins: tdm-ao-b-slv-fs { + mux { + groups = "tdm_ao_b_slv_fs"; + function = "tdm_ao_b"; + bias-disable; + }; + }; + + tdm_ao_b_slv_sclk_pins: tdm-ao-b-slv-sclk { + mux { + groups = "tdm_ao_b_slv_sclk"; + function = "tdm_ao_b"; + bias-disable; + }; + }; + + uart_ao_a_pins: uart-a-ao { + mux { + groups = "uart_ao_a_tx", + "uart_ao_a_rx"; + function = "uart_ao_a"; + bias-disable; + }; + }; + + uart_ao_a_cts_rts_pins: uart-ao-a-cts-rts { + mux { + groups = "uart_ao_a_cts", + "uart_ao_a_rts"; + function = "uart_ao_a"; + bias-disable; + }; + }; + + pwm_a_e_pins: pwm-a-e { + mux { + groups = "pwm_a_e"; + function = "pwm_a_e"; + bias-disable; + }; + }; + + pwm_ao_a_pins: pwm-ao-a { + mux { + groups = "pwm_ao_a"; + function = "pwm_ao_a"; + bias-disable; + }; + }; + + pwm_ao_b_pins: pwm-ao-b { + mux { + groups = "pwm_ao_b"; + function = "pwm_ao_b"; + bias-disable; + }; + }; + + pwm_ao_c_4_pins: pwm-ao-c-4 { + mux { + groups = "pwm_ao_c_4"; + function = "pwm_ao_c"; + bias-disable; + }; + }; + + pwm_ao_c_6_pins: pwm-ao-c-6 { + mux { + groups = "pwm_ao_c_6"; + function = "pwm_ao_c"; + bias-disable; + }; + }; + + pwm_ao_d_5_pins: pwm-ao-d-5 { + mux { + groups = "pwm_ao_d_5"; + function = "pwm_ao_d"; + bias-disable; + }; + }; + + pwm_ao_d_10_pins: pwm-ao-d-10 { + mux { + groups = "pwm_ao_d_10"; + function = "pwm_ao_d"; + bias-disable; + }; + }; + + pwm_ao_d_e_pins: pwm-ao-d-e { + mux { + groups = "pwm_ao_d_e"; + function = "pwm_ao_d"; + }; + }; + + remote_input_ao_pins: remote-input-ao { + mux { + groups = "remote_ao_input"; + function = "remote_ao_input"; + bias-disable; + }; + }; + }; + }; + + cec_AO: cec@100 { + compatible = "amlogic,meson-gx-ao-cec"; + reg = <0x0 0x00100 0x0 0x14>; + interrupts = <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_AO CLKID_AO_CEC>; + clock-names = "core"; + status = "disabled"; + }; + + sec_AO: ao-secure@140 { + compatible = "amlogic,meson-gx-ao-secure", "syscon"; + reg = <0x0 0x140 0x0 0x140>; + amlogic,has-chip-id; + }; + + cecb_AO: cec@280 { + compatible = "amlogic,meson-g12a-ao-cec"; + reg = <0x0 0x00280 0x0 0x1c>; + interrupts = <GIC_SPI 203 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_AO CLKID_AO_CTS_OSCIN>; + clock-names = "oscin"; + status = "disabled"; + }; + + pwm_AO_cd: pwm@2000 { + compatible = "amlogic,meson-g12a-ao-pwm-cd"; + reg = <0x0 0x2000 0x0 0x20>; + #pwm-cells = <3>; + status = "disabled"; + }; + + uart_AO: serial@3000 { + compatible = "amlogic,meson-gx-uart", + "amlogic,meson-ao-uart"; + reg = <0x0 0x3000 0x0 0x18>; + interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, <&clkc_AO CLKID_AO_UART>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; + status = "disabled"; + }; + + uart_AO_B: serial@4000 { + compatible = "amlogic,meson-gx-uart", + "amlogic,meson-ao-uart"; + reg = <0x0 0x4000 0x0 0x18>; + interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; + status = "disabled"; + }; + + i2c_AO: i2c@5000 { + compatible = "amlogic,meson-axg-i2c"; + status = "disabled"; + reg = <0x0 0x05000 0x0 0x20>; + interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc CLKID_I2C>; + }; + + pwm_AO_ab: pwm@7000 { + compatible = "amlogic,meson-g12a-ao-pwm-ab"; + reg = <0x0 0x7000 0x0 0x20>; + #pwm-cells = <3>; + status = "disabled"; + }; + + ir: ir@8000 { + compatible = "amlogic,meson-gxbb-ir"; + reg = <0x0 0x8000 0x0 0x20>; + interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + + saradc: adc@9000 { + compatible = "amlogic,meson-g12a-saradc", + "amlogic,meson-saradc"; + reg = <0x0 0x9000 0x0 0x48>; + #io-channel-cells = <1>; + interrupts = <GIC_SPI 200 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, + <&clkc_AO CLKID_AO_SAR_ADC>, + <&clkc_AO CLKID_AO_SAR_ADC_CLK>, + <&clkc_AO CLKID_AO_SAR_ADC_SEL>; + clock-names = "clkin", "core", "adc_clk", "adc_sel"; + status = "disabled"; + }; + }; + + vpu: vpu@ff900000 { + compatible = "amlogic,meson-g12a-vpu"; + reg = <0x0 0xff900000 0x0 0x100000>, + <0x0 0xff63c000 0x0 0x1000>; + reg-names = "vpu", "hhi"; + interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + amlogic,canvas = <&canvas>; + power-domains = <&pwrc_vpu>; + + /* CVBS VDAC output port */ + cvbs_vdac_port: port@0 { + reg = <0>; + }; + + /* HDMI-TX output port */ + hdmi_tx_port: port@1 { + reg = <1>; + + hdmi_tx_out: endpoint { + remote-endpoint = <&hdmi_tx_in>; + }; + }; + }; + + gic: interrupt-controller@ffc01000 { + compatible = "arm,gic-400"; + reg = <0x0 0xffc01000 0 0x1000>, + <0x0 0xffc02000 0 0x2000>, + <0x0 0xffc04000 0 0x2000>, + <0x0 0xffc06000 0 0x2000>; + interrupt-controller; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; + #interrupt-cells = <3>; + #address-cells = <0>; + }; + + cbus: bus@ffd00000 { + compatible = "simple-bus"; + reg = <0x0 0xffd00000 0x0 0x100000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x100000>; + + reset: reset-controller@1004 { + compatible = "amlogic,meson-g12a-reset", + "amlogic,meson-axg-reset"; + reg = <0x0 0x1004 0x0 0x9c>; + #reset-cells = <1>; + }; + + gpio_intc: interrupt-controller@f080 { + compatible = "amlogic,meson-g12a-gpio-intc", + "amlogic,meson-gpio-intc"; + reg = <0x0 0xf080 0x0 0x10>; + interrupt-controller; + #interrupt-cells = <2>; + amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>; + }; + + pwm_ef: pwm@19000 { + compatible = "amlogic,meson-g12a-ee-pwm"; + reg = <0x0 0x19000 0x0 0x20>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm_cd: pwm@1a000 { + compatible = "amlogic,meson-g12a-ee-pwm"; + reg = <0x0 0x1a000 0x0 0x20>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm_ab: pwm@1b000 { + compatible = "amlogic,meson-g12a-ee-pwm"; + reg = <0x0 0x1b000 0x0 0x20>; + #pwm-cells = <3>; + status = "disabled"; + }; + + i2c3: i2c@1c000 { + compatible = "amlogic,meson-axg-i2c"; + status = "disabled"; + reg = <0x0 0x1c000 0x0 0x20>; + interrupts = <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc CLKID_I2C>; + }; + + i2c2: i2c@1d000 { + compatible = "amlogic,meson-axg-i2c"; + status = "disabled"; + reg = <0x0 0x1d000 0x0 0x20>; + interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc CLKID_I2C>; + }; + + i2c1: i2c@1e000 { + compatible = "amlogic,meson-axg-i2c"; + status = "disabled"; + reg = <0x0 0x1e000 0x0 0x20>; + interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc CLKID_I2C>; + }; + + i2c0: i2c@1f000 { + compatible = "amlogic,meson-axg-i2c"; + status = "disabled"; + reg = <0x0 0x1f000 0x0 0x20>; + interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc CLKID_I2C>; + }; + + clk_msr: clock-measure@18000 { + compatible = "amlogic,meson-g12a-clk-measure"; + reg = <0x0 0x18000 0x0 0x10>; + }; + + uart_C: serial@22000 { + compatible = "amlogic,meson-gx-uart"; + reg = <0x0 0x22000 0x0 0x18>; + interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; + status = "disabled"; + }; + + uart_B: serial@23000 { + compatible = "amlogic,meson-gx-uart"; + reg = <0x0 0x23000 0x0 0x18>; + interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; + status = "disabled"; + }; + + uart_A: serial@24000 { + compatible = "amlogic,meson-gx-uart"; + reg = <0x0 0x24000 0x0 0x18>; + interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; + status = "disabled"; + }; + }; + + sd_emmc_a: sd@ffe03000 { + compatible = "amlogic,meson-axg-mmc"; + reg = <0x0 0xffe03000 0x0 0x800>; + interrupts = <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + clocks = <&clkc CLKID_SD_EMMC_A>, + <&clkc CLKID_SD_EMMC_A_CLK0>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_A>; + }; + + sd_emmc_b: sd@ffe05000 { + compatible = "amlogic,meson-axg-mmc"; + reg = <0x0 0xffe05000 0x0 0x800>; + interrupts = <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + clocks = <&clkc CLKID_SD_EMMC_B>, + <&clkc CLKID_SD_EMMC_B_CLK0>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_B>; + }; + + sd_emmc_c: mmc@ffe07000 { + compatible = "amlogic,meson-axg-mmc"; + reg = <0x0 0xffe07000 0x0 0x800>; + interrupts = <GIC_SPI 191 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + clocks = <&clkc CLKID_SD_EMMC_C>, + <&clkc CLKID_SD_EMMC_C_CLK0>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_C>; + }; + + usb: usb@ffe09000 { + status = "disabled"; + compatible = "amlogic,meson-g12a-usb-ctrl"; + reg = <0x0 0xffe09000 0x0 0xa0>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&clkc CLKID_USB>; + resets = <&reset RESET_USB>; + + dr_mode = "otg"; + + phys = <&usb2_phy0>, <&usb2_phy1>, + <&usb3_pcie_phy PHY_TYPE_USB3>; + phy-names = "usb2-phy0", "usb2-phy1", "usb3-phy0"; + + dwc2: usb@ff400000 { + compatible = "amlogic,meson-g12a-usb", "snps,dwc2"; + reg = <0x0 0xff400000 0x0 0x40000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc CLKID_USB1_DDR_BRIDGE>; + clock-names = "ddr"; + phys = <&usb2_phy1>; + phy-names = "usb2-phy"; + dr_mode = "peripheral"; + g-rx-fifo-size = <192>; + g-np-tx-fifo-size = <128>; + g-tx-fifo-size = <128 128 16 16 16>; + }; + + dwc3: usb@ff500000 { + compatible = "snps,dwc3"; + reg = <0x0 0xff500000 0x0 0x100000>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + snps,dis_u2_susphy_quirk; + snps,quirk-frame-length-adjustment; + }; + }; + + mali: gpu@ffe40000 { + compatible = "amlogic,meson-g12a-mali", "arm,mali-bifrost"; + reg = <0x0 0xffe40000 0x0 0x40000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gpu", "mmu", "job"; + clocks = <&clkc CLKID_MALI>; + resets = <&reset RESET_DVALIN_CAPB3>, <&reset RESET_DVALIN>; + + /* + * Mali clocking is provided by two identical clock paths + * MALI_0 and MALI_1 muxed to a single clock by a glitch + * free mux to safely change frequency while running. + */ + assigned-clocks = <&clkc CLKID_MALI_0_SEL>, + <&clkc CLKID_MALI_0>, + <&clkc CLKID_MALI>; /* Glitch free mux */ + assigned-clock-parents = <&clkc CLKID_FCLK_DIV2P5>, + <0>, /* Do Nothing */ + <&clkc CLKID_MALI_0>; + assigned-clock-rates = <0>, /* Do Nothing */ + <800000000>, + <0>; /* Do Nothing */ + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>; + arm,no-tick-in-suspend; + }; + + xtal: xtal-clk { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "xtal"; + #clock-cells = <0>; + }; + +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts index c7a87368850b..c9fa23a56562 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts @@ -129,6 +129,25 @@ enable-active-high; }; + vddcpu: regulator-vddcpu { + /* + * SY8120B1ABC DC/DC Regulator. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU"; + regulator-min-microvolt = <721000>; + regulator-max-microvolt = <1022000>; + + vin-supply = <&dc_in>; + + pwms = <&pwm_AO_cd 1 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + vddio_ao1v8: regulator-vddio_ao1v8 { compatible = "regulator-fixed"; regulator-name = "VDDIO_AO1V8"; @@ -297,6 +316,34 @@ status = "okay"; }; +&cpu0 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu1 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu2 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu3 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + &cvbs_vdac_port { cvbs_vdac_out: endpoint { remote-endpoint = <&cvbs_connector_in>; @@ -339,6 +386,20 @@ pinctrl-names = "default"; }; +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +&pwm_AO_cd { + pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; + status = "okay"; +}; + &pwm_ef { status = "okay"; pinctrl-0 = <&pwm_e_pins>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts index 8551fbd4a488..2a324f0136e3 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts @@ -129,6 +129,24 @@ regulator-always-on; }; + vddcpu: regulator-vddcpu { + /* + * MP8756GD Regulator. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU"; + regulator-min-microvolt = <721000>; + regulator-max-microvolt = <1022000>; + + vin-supply = <&main_12v>; + + pwms = <&pwm_AO_cd 1 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; }; &cec_AO { @@ -145,6 +163,34 @@ hdmi-phandle = <&hdmi_tx>; }; +&cpu0 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu1 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu2 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu3 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + &cvbs_vdac_port { cvbs_vdac_out: endpoint { remote-endpoint = <&cvbs_connector_in>; @@ -197,6 +243,14 @@ pinctrl-names = "default"; }; +&pwm_AO_cd { + pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; + status = "okay"; +}; + /* SD card */ &sd_emmc_b { status = "okay"; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts index fe4013cca876..c1e58a69d434 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts @@ -132,6 +132,22 @@ regulator-always-on; }; + vddcpu: regulator-vddcpu { + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU"; + regulator-min-microvolt = <721000>; + regulator-max-microvolt = <1022000>; + + vin-supply = <&dc_in>; + + pwms = <&pwm_AO_cd 1 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + sound { compatible = "amlogic,axg-sound-card"; model = "G12A-X96-MAX"; @@ -242,6 +258,34 @@ status = "okay"; }; +&cpu0 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu1 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu2 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu3 { + cpu-supply = <&vddcpu>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + &cvbs_vdac_port { cvbs_vdac_out: endpoint { remote-endpoint = <&cvbs_connector_in>; @@ -279,6 +323,14 @@ pinctrl-names = "default"; }; +&pwm_AO_cd { + pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; + status = "okay"; +}; + &ext_mdio { external_phy: ethernet-phy@0 { /* Realtek RTL8211F (0x001cc916) */ diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi index f8d43e3dcf20..733a9d46fc4b 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi @@ -3,56 +3,11 @@ * Copyright (c) 2018 Amlogic, Inc. All rights reserved. */ -#include <dt-bindings/phy/phy.h> -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/clock/axg-audio-clkc.h> -#include <dt-bindings/clock/g12a-clkc.h> -#include <dt-bindings/clock/g12a-aoclkc.h> -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h> -#include <dt-bindings/reset/amlogic,meson-g12a-reset.h> +#include "meson-g12-common.dtsi" / { compatible = "amlogic,g12a"; - interrupt-parent = <&gic>; - #address-cells = <2>; - #size-cells = <2>; - - tdmif_a: audio-controller-0 { - compatible = "amlogic,axg-tdm-iface"; - #sound-dai-cells = <0>; - sound-name-prefix = "TDM_A"; - clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>, - <&clkc_audio AUD_CLKID_MST_A_SCLK>, - <&clkc_audio AUD_CLKID_MST_A_LRCLK>; - clock-names = "mclk", "sclk", "lrclk"; - status = "disabled"; - }; - - tdmif_b: audio-controller-1 { - compatible = "amlogic,axg-tdm-iface"; - #sound-dai-cells = <0>; - sound-name-prefix = "TDM_B"; - clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>, - <&clkc_audio AUD_CLKID_MST_B_SCLK>, - <&clkc_audio AUD_CLKID_MST_B_LRCLK>; - clock-names = "mclk", "sclk", "lrclk"; - status = "disabled"; - }; - - tdmif_c: audio-controller-2 { - compatible = "amlogic,axg-tdm-iface"; - #sound-dai-cells = <0>; - sound-name-prefix = "TDM_C"; - clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>, - <&clkc_audio AUD_CLKID_MST_C_SCLK>, - <&clkc_audio AUD_CLKID_MST_C_LRCLK>; - clock-names = "mclk", "sclk", "lrclk"; - status = "disabled"; - }; - cpus { #address-cells = <0x2>; #size-cells = <0x0>; @@ -94,2359 +49,67 @@ }; }; - efuse: efuse { - compatible = "amlogic,meson-gxbb-efuse"; - clocks = <&clkc CLKID_EFUSE>; - #address-cells = <1>; - #size-cells = <1>; - read-only; - }; + cpu_opp_table: opp-table { + compatible = "operating-points-v2"; + opp-shared; - psci { - compatible = "arm,psci-1.0"; - method = "smc"; - }; - - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - /* 3 MiB reserved for ARM Trusted Firmware (BL31) */ - secmon_reserved: secmon@5000000 { - reg = <0x0 0x05000000 0x0 0x300000>; - no-map; + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + opp-microvolt = <731000>; }; - linux,cma { - compatible = "shared-dma-pool"; - reusable; - size = <0x0 0x10000000>; - alignment = <0x0 0x400000>; - linux,cma-default; + opp-250000000 { + opp-hz = /bits/ 64 <250000000>; + opp-microvolt = <731000>; }; - }; - - sm: secure-monitor { - compatible = "amlogic,meson-gxbb-sm"; - }; - - soc { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - ethmac: ethernet@ff3f0000 { - compatible = "amlogic,meson-axg-dwmac", - "snps,dwmac-3.70a", - "snps,dwmac"; - reg = <0x0 0xff3f0000 0x0 0x10000 - 0x0 0xff634540 0x0 0x8>; - interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "macirq"; - clocks = <&clkc CLKID_ETH>, - <&clkc CLKID_FCLK_DIV2>, - <&clkc CLKID_MPLL2>; - clock-names = "stmmaceth", "clkin0", "clkin1"; - status = "disabled"; - - mdio0: mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,dwmac-mdio"; - }; + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <731000>; }; - apb: bus@ff600000 { - compatible = "simple-bus"; - reg = <0x0 0xff600000 0x0 0x200000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xff600000 0x0 0x200000>; - - hdmi_tx: hdmi-tx@0 { - compatible = "amlogic,meson-g12a-dw-hdmi"; - reg = <0x0 0x0 0x0 0x10000>; - interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>; - resets = <&reset RESET_HDMITX_CAPB3>, - <&reset RESET_HDMITX_PHY>, - <&reset RESET_HDMITX>; - reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy"; - clocks = <&clkc CLKID_HDMI>, - <&clkc CLKID_HTX_PCLK>, - <&clkc CLKID_VPU_INTR>; - clock-names = "isfr", "iahb", "venci"; - #address-cells = <1>; - #size-cells = <0>; - #sound-dai-cells = <0>; - status = "disabled"; - - /* VPU VENC Input */ - hdmi_tx_venc_port: port@0 { - reg = <0>; - - hdmi_tx_in: endpoint { - remote-endpoint = <&hdmi_tx_out>; - }; - }; - - /* TMDS Output */ - hdmi_tx_tmds_port: port@1 { - reg = <1>; - }; - }; - - apb_efuse: bus@30000 { - compatible = "simple-bus"; - reg = <0x0 0x30000 0x0 0x2000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0x30000 0x0 0x2000>; - - hwrng: rng@218 { - compatible = "amlogic,meson-rng"; - reg = <0x0 0x218 0x0 0x4>; - }; - }; - - periphs: bus@34400 { - compatible = "simple-bus"; - reg = <0x0 0x34400 0x0 0x400>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0x34400 0x0 0x400>; - - periphs_pinctrl: pinctrl@40 { - compatible = "amlogic,meson-g12a-periphs-pinctrl"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - gpio: bank@40 { - reg = <0x0 0x40 0x0 0x4c>, - <0x0 0xe8 0x0 0x18>, - <0x0 0x120 0x0 0x18>, - <0x0 0x2c0 0x0 0x40>, - <0x0 0x340 0x0 0x1c>; - reg-names = "gpio", - "pull", - "pull-enable", - "mux", - "ds"; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&periphs_pinctrl 0 0 86>; - }; - - cec_ao_a_h_pins: cec_ao_a_h { - mux { - groups = "cec_ao_a_h"; - function = "cec_ao_a_h"; - bias-disable; - }; - }; - - cec_ao_b_h_pins: cec_ao_b_h { - mux { - groups = "cec_ao_b_h"; - function = "cec_ao_b_h"; - bias-disable; - }; - }; - - emmc_pins: emmc { - mux-0 { - groups = "emmc_nand_d0", - "emmc_nand_d1", - "emmc_nand_d2", - "emmc_nand_d3", - "emmc_nand_d4", - "emmc_nand_d5", - "emmc_nand_d6", - "emmc_nand_d7", - "emmc_cmd"; - function = "emmc"; - bias-pull-up; - drive-strength-microamp = <4000>; - }; - - mux-1 { - groups = "emmc_clk"; - function = "emmc"; - bias-disable; - drive-strength-microamp = <4000>; - }; - }; - - emmc_ds_pins: emmc-ds { - mux { - groups = "emmc_nand_ds"; - function = "emmc"; - bias-pull-down; - drive-strength-microamp = <4000>; - }; - }; - - emmc_clk_gate_pins: emmc_clk_gate { - mux { - groups = "BOOT_8"; - function = "gpio_periphs"; - bias-pull-down; - drive-strength-microamp = <4000>; - }; - }; - - hdmitx_ddc_pins: hdmitx_ddc { - mux { - groups = "hdmitx_sda", - "hdmitx_sck"; - function = "hdmitx"; - bias-disable; - drive-strength-microamp = <4000>; - }; - }; - - hdmitx_hpd_pins: hdmitx_hpd { - mux { - groups = "hdmitx_hpd_in"; - function = "hdmitx"; - bias-disable; - }; - }; - - - i2c0_sda_c_pins: i2c0-sda-c { - mux { - groups = "i2c0_sda_c"; - function = "i2c0"; - bias-disable; - drive-strength-microamp = <3000>; - - }; - }; - - i2c0_sck_c_pins: i2c0-sck-c { - mux { - groups = "i2c0_sck_c"; - function = "i2c0"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c0_sda_z0_pins: i2c0-sda-z0 { - mux { - groups = "i2c0_sda_z0"; - function = "i2c0"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c0_sck_z1_pins: i2c0-sck-z1 { - mux { - groups = "i2c0_sck_z1"; - function = "i2c0"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c0_sda_z7_pins: i2c0-sda-z7 { - mux { - groups = "i2c0_sda_z7"; - function = "i2c0"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c0_sda_z8_pins: i2c0-sda-z8 { - mux { - groups = "i2c0_sda_z8"; - function = "i2c0"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c1_sda_x_pins: i2c1-sda-x { - mux { - groups = "i2c1_sda_x"; - function = "i2c1"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c1_sck_x_pins: i2c1-sck-x { - mux { - groups = "i2c1_sck_x"; - function = "i2c1"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c1_sda_h2_pins: i2c1-sda-h2 { - mux { - groups = "i2c1_sda_h2"; - function = "i2c1"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c1_sck_h3_pins: i2c1-sck-h3 { - mux { - groups = "i2c1_sck_h3"; - function = "i2c1"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c1_sda_h6_pins: i2c1-sda-h6 { - mux { - groups = "i2c1_sda_h6"; - function = "i2c1"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c1_sck_h7_pins: i2c1-sck-h7 { - mux { - groups = "i2c1_sck_h7"; - function = "i2c1"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c2_sda_x_pins: i2c2-sda-x { - mux { - groups = "i2c2_sda_x"; - function = "i2c2"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c2_sck_x_pins: i2c2-sck-x { - mux { - groups = "i2c2_sck_x"; - function = "i2c2"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c2_sda_z_pins: i2c2-sda-z { - mux { - groups = "i2c2_sda_z"; - function = "i2c2"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c2_sck_z_pins: i2c2-sck-z { - mux { - groups = "i2c2_sck_z"; - function = "i2c2"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c3_sda_h_pins: i2c3-sda-h { - mux { - groups = "i2c3_sda_h"; - function = "i2c3"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c3_sck_h_pins: i2c3-sck-h { - mux { - groups = "i2c3_sck_h"; - function = "i2c3"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c3_sda_a_pins: i2c3-sda-a { - mux { - groups = "i2c3_sda_a"; - function = "i2c3"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c3_sck_a_pins: i2c3-sck-a { - mux { - groups = "i2c3_sck_a"; - function = "i2c3"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - mclk0_a_pins: mclk0-a { - mux { - groups = "mclk0_a"; - function = "mclk0"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - mclk1_a_pins: mclk1-a { - mux { - groups = "mclk1_a"; - function = "mclk1"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - mclk1_x_pins: mclk1-x { - mux { - groups = "mclk1_x"; - function = "mclk1"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - mclk1_z_pins: mclk1-z { - mux { - groups = "mclk1_z"; - function = "mclk1"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - pdm_din0_a_pins: pdm-din0-a { - mux { - groups = "pdm_din0_a"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din0_c_pins: pdm-din0-c { - mux { - groups = "pdm_din0_c"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din0_x_pins: pdm-din0-x { - mux { - groups = "pdm_din0_x"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din0_z_pins: pdm-din0-z { - mux { - groups = "pdm_din0_z"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din1_a_pins: pdm-din1-a { - mux { - groups = "pdm_din1_a"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din1_c_pins: pdm-din1-c { - mux { - groups = "pdm_din1_c"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din1_x_pins: pdm-din1-x { - mux { - groups = "pdm_din1_x"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din1_z_pins: pdm-din1-z { - mux { - groups = "pdm_din1_z"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din2_a_pins: pdm-din2-a { - mux { - groups = "pdm_din2_a"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din2_c_pins: pdm-din2-c { - mux { - groups = "pdm_din2_c"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din2_x_pins: pdm-din2-x { - mux { - groups = "pdm_din2_x"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din2_z_pins: pdm-din2-z { - mux { - groups = "pdm_din2_z"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din3_a_pins: pdm-din3-a { - mux { - groups = "pdm_din3_a"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din3_c_pins: pdm-din3-c { - mux { - groups = "pdm_din3_c"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din3_x_pins: pdm-din3-x { - mux { - groups = "pdm_din3_x"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_din3_z_pins: pdm-din3-z { - mux { - groups = "pdm_din3_z"; - function = "pdm"; - bias-disable; - }; - }; - - pdm_dclk_a_pins: pdm-dclk-a { - mux { - groups = "pdm_dclk_a"; - function = "pdm"; - bias-disable; - drive-strength-microamp = <500>; - }; - }; - - pdm_dclk_c_pins: pdm-dclk-c { - mux { - groups = "pdm_dclk_c"; - function = "pdm"; - bias-disable; - drive-strength-microamp = <500>; - }; - }; - - pdm_dclk_x_pins: pdm-dclk-x { - mux { - groups = "pdm_dclk_x"; - function = "pdm"; - bias-disable; - drive-strength-microamp = <500>; - }; - }; - - pdm_dclk_z_pins: pdm-dclk-z { - mux { - groups = "pdm_dclk_z"; - function = "pdm"; - bias-disable; - drive-strength-microamp = <500>; - }; - }; - - pwm_a_pins: pwm-a { - mux { - groups = "pwm_a"; - function = "pwm_a"; - bias-disable; - }; - }; - - pwm_b_x7_pins: pwm-b-x7 { - mux { - groups = "pwm_b_x7"; - function = "pwm_b"; - bias-disable; - }; - }; - - pwm_b_x19_pins: pwm-b-x19 { - mux { - groups = "pwm_b_x19"; - function = "pwm_b"; - bias-disable; - }; - }; - - pwm_c_c_pins: pwm-c-c { - mux { - groups = "pwm_c_c"; - function = "pwm_c"; - bias-disable; - }; - }; - - pwm_c_x5_pins: pwm-c-x5 { - mux { - groups = "pwm_c_x5"; - function = "pwm_c"; - bias-disable; - }; - }; - - pwm_c_x8_pins: pwm-c-x8 { - mux { - groups = "pwm_c_x8"; - function = "pwm_c"; - bias-disable; - }; - }; - - pwm_d_x3_pins: pwm-d-x3 { - mux { - groups = "pwm_d_x3"; - function = "pwm_d"; - bias-disable; - }; - }; - - pwm_d_x6_pins: pwm-d-x6 { - mux { - groups = "pwm_d_x6"; - function = "pwm_d"; - bias-disable; - }; - }; - - pwm_e_pins: pwm-e { - mux { - groups = "pwm_e"; - function = "pwm_e"; - bias-disable; - }; - }; - - pwm_f_x_pins: pwm-f-x { - mux { - groups = "pwm_f_x"; - function = "pwm_f"; - bias-disable; - }; - }; - - pwm_f_h_pins: pwm-f-h { - mux { - groups = "pwm_f_h"; - function = "pwm_f"; - bias-disable; - }; - }; - - sdcard_c_pins: sdcard_c { - mux-0 { - groups = "sdcard_d0_c", - "sdcard_d1_c", - "sdcard_d2_c", - "sdcard_d3_c", - "sdcard_cmd_c"; - function = "sdcard"; - bias-pull-up; - drive-strength-microamp = <4000>; - }; - - mux-1 { - groups = "sdcard_clk_c"; - function = "sdcard"; - bias-disable; - drive-strength-microamp = <4000>; - }; - }; - - sdcard_clk_gate_c_pins: sdcard_clk_gate_c { - mux { - groups = "GPIOC_4"; - function = "gpio_periphs"; - bias-pull-down; - drive-strength-microamp = <4000>; - }; - }; - - sdcard_z_pins: sdcard_z { - mux-0 { - groups = "sdcard_d0_z", - "sdcard_d1_z", - "sdcard_d2_z", - "sdcard_d3_z", - "sdcard_cmd_z"; - function = "sdcard"; - bias-pull-up; - drive-strength-microamp = <4000>; - }; - - mux-1 { - groups = "sdcard_clk_z"; - function = "sdcard"; - bias-disable; - drive-strength-microamp = <4000>; - }; - }; - - sdcard_clk_gate_z_pins: sdcard_clk_gate_z { - mux { - groups = "GPIOZ_6"; - function = "gpio_periphs"; - bias-pull-down; - drive-strength-microamp = <4000>; - }; - }; - - sdio_pins: sdio { - mux { - groups = "sdio_d0", - "sdio_d1", - "sdio_d2", - "sdio_d3", - "sdio_clk", - "sdio_cmd"; - function = "sdio"; - bias-disable; - drive-strength-microamp = <4000>; - }; - }; - - sdio_clk_gate_pins: sdio_clk_gate { - mux { - groups = "GPIOX_4"; - function = "gpio_periphs"; - bias-pull-down; - drive-strength-microamp = <4000>; - }; - }; - - spdif_in_a10_pins: spdif-in-a10 { - mux { - groups = "spdif_in_a10"; - function = "spdif_in"; - bias-disable; - }; - }; - - spdif_in_a12_pins: spdif-in-a12 { - mux { - groups = "spdif_in_a12"; - function = "spdif_in"; - bias-disable; - }; - }; - - spdif_in_h_pins: spdif-in-h { - mux { - groups = "spdif_in_h"; - function = "spdif_in"; - bias-disable; - }; - }; - - spdif_out_h_pins: spdif-out-h { - mux { - groups = "spdif_out_h"; - function = "spdif_out"; - drive-strength-microamp = <500>; - bias-disable; - }; - }; - - spdif_out_a11_pins: spdif-out-a11 { - mux { - groups = "spdif_out_a11"; - function = "spdif_out"; - drive-strength-microamp = <500>; - bias-disable; - }; - }; - - spdif_out_a13_pins: spdif-out-a13 { - mux { - groups = "spdif_out_a13"; - function = "spdif_out"; - drive-strength-microamp = <500>; - bias-disable; - }; - }; - - tdm_a_din0_pins: tdm-a-din0 { - mux { - groups = "tdm_a_din0"; - function = "tdm_a"; - bias-disable; - }; - }; - - - tdm_a_din1_pins: tdm-a-din1 { - mux { - groups = "tdm_a_din1"; - function = "tdm_a"; - bias-disable; - }; - }; - - tdm_a_dout0_pins: tdm-a-dout0 { - mux { - groups = "tdm_a_dout0"; - function = "tdm_a"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_a_dout1_pins: tdm-a-dout1 { - mux { - groups = "tdm_a_dout1"; - function = "tdm_a"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_a_fs_pins: tdm-a-fs { - mux { - groups = "tdm_a_fs"; - function = "tdm_a"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_a_sclk_pins: tdm-a-sclk { - mux { - groups = "tdm_a_sclk"; - function = "tdm_a"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_a_slv_fs_pins: tdm-a-slv-fs { - mux { - groups = "tdm_a_slv_fs"; - function = "tdm_a"; - bias-disable; - }; - }; - - - tdm_a_slv_sclk_pins: tdm-a-slv-sclk { - mux { - groups = "tdm_a_slv_sclk"; - function = "tdm_a"; - bias-disable; - }; - }; - - tdm_b_din0_pins: tdm-b-din0 { - mux { - groups = "tdm_b_din0"; - function = "tdm_b"; - bias-disable; - }; - }; - - tdm_b_din1_pins: tdm-b-din1 { - mux { - groups = "tdm_b_din1"; - function = "tdm_b"; - bias-disable; - }; - }; - - tdm_b_din2_pins: tdm-b-din2 { - mux { - groups = "tdm_b_din2"; - function = "tdm_b"; - bias-disable; - }; - }; - - tdm_b_din3_a_pins: tdm-b-din3-a { - mux { - groups = "tdm_b_din3_a"; - function = "tdm_b"; - bias-disable; - }; - }; - - tdm_b_din3_h_pins: tdm-b-din3-h { - mux { - groups = "tdm_b_din3_h"; - function = "tdm_b"; - bias-disable; - }; - }; - - tdm_b_dout0_pins: tdm-b-dout0 { - mux { - groups = "tdm_b_dout0"; - function = "tdm_b"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_b_dout1_pins: tdm-b-dout1 { - mux { - groups = "tdm_b_dout1"; - function = "tdm_b"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_b_dout2_pins: tdm-b-dout2 { - mux { - groups = "tdm_b_dout2"; - function = "tdm_b"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_b_dout3_a_pins: tdm-b-dout3-a { - mux { - groups = "tdm_b_dout3_a"; - function = "tdm_b"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_b_dout3_h_pins: tdm-b-dout3-h { - mux { - groups = "tdm_b_dout3_h"; - function = "tdm_b"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_b_fs_pins: tdm-b-fs { - mux { - groups = "tdm_b_fs"; - function = "tdm_b"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_b_sclk_pins: tdm-b-sclk { - mux { - groups = "tdm_b_sclk"; - function = "tdm_b"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_b_slv_fs_pins: tdm-b-slv-fs { - mux { - groups = "tdm_b_slv_fs"; - function = "tdm_b"; - bias-disable; - }; - }; - - tdm_b_slv_sclk_pins: tdm-b-slv-sclk { - mux { - groups = "tdm_b_slv_sclk"; - function = "tdm_b"; - bias-disable; - }; - }; - - tdm_c_din0_a_pins: tdm-c-din0-a { - mux { - groups = "tdm_c_din0_a"; - function = "tdm_c"; - bias-disable; - }; - }; - - tdm_c_din0_z_pins: tdm-c-din0-z { - mux { - groups = "tdm_c_din0_z"; - function = "tdm_c"; - bias-disable; - }; - }; - - tdm_c_din1_a_pins: tdm-c-din1-a { - mux { - groups = "tdm_c_din1_a"; - function = "tdm_c"; - bias-disable; - }; - }; - - tdm_c_din1_z_pins: tdm-c-din1-z { - mux { - groups = "tdm_c_din1_z"; - function = "tdm_c"; - bias-disable; - }; - }; - - tdm_c_din2_a_pins: tdm-c-din2-a { - mux { - groups = "tdm_c_din2_a"; - function = "tdm_c"; - bias-disable; - }; - }; - - eth_leds_pins: eth-leds { - mux { - groups = "eth_link_led", - "eth_act_led"; - function = "eth"; - bias-disable; - }; - }; - - eth_pins: eth { - mux { - groups = "eth_mdio", - "eth_mdc", - "eth_rgmii_rx_clk", - "eth_rx_dv", - "eth_rxd0", - "eth_rxd1", - "eth_txen", - "eth_txd0", - "eth_txd1"; - function = "eth"; - drive-strength-microamp = <4000>; - bias-disable; - }; - }; - - eth_rgmii_pins: eth-rgmii { - mux { - groups = "eth_rxd2_rgmii", - "eth_rxd3_rgmii", - "eth_rgmii_tx_clk", - "eth_txd2_rgmii", - "eth_txd3_rgmii"; - function = "eth"; - drive-strength-microamp = <4000>; - bias-disable; - }; - }; - - tdm_c_din2_z_pins: tdm-c-din2-z { - mux { - groups = "tdm_c_din2_z"; - function = "tdm_c"; - bias-disable; - }; - }; - - tdm_c_din3_a_pins: tdm-c-din3-a { - mux { - groups = "tdm_c_din3_a"; - function = "tdm_c"; - bias-disable; - }; - }; - - tdm_c_din3_z_pins: tdm-c-din3-z { - mux { - groups = "tdm_c_din3_z"; - function = "tdm_c"; - bias-disable; - }; - }; - - tdm_c_dout0_a_pins: tdm-c-dout0-a { - mux { - groups = "tdm_c_dout0_a"; - function = "tdm_c"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_c_dout0_z_pins: tdm-c-dout0-z { - mux { - groups = "tdm_c_dout0_z"; - function = "tdm_c"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_c_dout1_a_pins: tdm-c-dout1-a { - mux { - groups = "tdm_c_dout1_a"; - function = "tdm_c"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_c_dout1_z_pins: tdm-c-dout1-z { - mux { - groups = "tdm_c_dout1_z"; - function = "tdm_c"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_c_dout2_a_pins: tdm-c-dout2-a { - mux { - groups = "tdm_c_dout2_a"; - function = "tdm_c"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_c_dout2_z_pins: tdm-c-dout2-z { - mux { - groups = "tdm_c_dout2_z"; - function = "tdm_c"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_c_dout3_a_pins: tdm-c-dout3-a { - mux { - groups = "tdm_c_dout3_a"; - function = "tdm_c"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_c_dout3_z_pins: tdm-c-dout3-z { - mux { - groups = "tdm_c_dout3_z"; - function = "tdm_c"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_c_fs_a_pins: tdm-c-fs-a { - mux { - groups = "tdm_c_fs_a"; - function = "tdm_c"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_c_fs_z_pins: tdm-c-fs-z { - mux { - groups = "tdm_c_fs_z"; - function = "tdm_c"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_c_sclk_a_pins: tdm-c-sclk-a { - mux { - groups = "tdm_c_sclk_a"; - function = "tdm_c"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_c_sclk_z_pins: tdm-c-sclk-z { - mux { - groups = "tdm_c_sclk_z"; - function = "tdm_c"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_c_slv_fs_a_pins: tdm-c-slv-fs-a { - mux { - groups = "tdm_c_slv_fs_a"; - function = "tdm_c"; - bias-disable; - }; - }; - - tdm_c_slv_fs_z_pins: tdm-c-slv-fs-z { - mux { - groups = "tdm_c_slv_fs_z"; - function = "tdm_c"; - bias-disable; - }; - }; - - tdm_c_slv_sclk_a_pins: tdm-c-slv-sclk-a { - mux { - groups = "tdm_c_slv_sclk_a"; - function = "tdm_c"; - bias-disable; - }; - }; - - tdm_c_slv_sclk_z_pins: tdm-c-slv-sclk-z { - mux { - groups = "tdm_c_slv_sclk_z"; - function = "tdm_c"; - bias-disable; - }; - }; - - uart_a_pins: uart-a { - mux { - groups = "uart_a_tx", - "uart_a_rx"; - function = "uart_a"; - bias-disable; - }; - }; - - uart_a_cts_rts_pins: uart-a-cts-rts { - mux { - groups = "uart_a_cts", - "uart_a_rts"; - function = "uart_a"; - bias-disable; - }; - }; - - uart_b_pins: uart-b { - mux { - groups = "uart_b_tx", - "uart_b_rx"; - function = "uart_b"; - bias-disable; - }; - }; - - uart_c_pins: uart-c { - mux { - groups = "uart_c_tx", - "uart_c_rx"; - function = "uart_c"; - bias-disable; - }; - }; - - uart_c_cts_rts_pins: uart-c-cts-rts { - mux { - groups = "uart_c_cts", - "uart_c_rts"; - function = "uart_c"; - bias-disable; - }; - }; - }; - }; - - usb2_phy0: phy@36000 { - compatible = "amlogic,g12a-usb2-phy"; - reg = <0x0 0x36000 0x0 0x2000>; - clocks = <&xtal>; - clock-names = "xtal"; - resets = <&reset RESET_USB_PHY20>; - reset-names = "phy"; - #phy-cells = <0>; - }; - - dmc: bus@38000 { - compatible = "simple-bus"; - reg = <0x0 0x38000 0x0 0x400>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0x38000 0x0 0x400>; - - canvas: video-lut@48 { - compatible = "amlogic,canvas"; - reg = <0x0 0x48 0x0 0x14>; - }; - }; - - usb2_phy1: phy@3a000 { - compatible = "amlogic,g12a-usb2-phy"; - reg = <0x0 0x3a000 0x0 0x2000>; - clocks = <&xtal>; - clock-names = "xtal"; - resets = <&reset RESET_USB_PHY21>; - reset-names = "phy"; - #phy-cells = <0>; - }; - - hiu: bus@3c000 { - compatible = "simple-bus"; - reg = <0x0 0x3c000 0x0 0x1400>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0x3c000 0x0 0x1400>; - - hhi: system-controller@0 { - compatible = "amlogic,meson-gx-hhi-sysctrl", - "simple-mfd", "syscon"; - reg = <0 0 0 0x400>; - - clkc: clock-controller { - compatible = "amlogic,g12a-clkc"; - #clock-cells = <1>; - clocks = <&xtal>; - clock-names = "xtal"; - }; - }; - }; - - pdm: audio-controller@40000 { - compatible = "amlogic,g12a-pdm", - "amlogic,axg-pdm"; - reg = <0x0 0x40000 0x0 0x34>; - #sound-dai-cells = <0>; - sound-name-prefix = "PDM"; - clocks = <&clkc_audio AUD_CLKID_PDM>, - <&clkc_audio AUD_CLKID_PDM_DCLK>, - <&clkc_audio AUD_CLKID_PDM_SYSCLK>; - clock-names = "pclk", "dclk", "sysclk"; - status = "disabled"; - }; - - audio: bus@42000 { - compatible = "simple-bus"; - reg = <0x0 0x42000 0x0 0x2000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0x42000 0x0 0x2000>; - - clkc_audio: clock-controller@0 { - status = "disabled"; - compatible = "amlogic,g12a-audio-clkc"; - reg = <0x0 0x0 0x0 0xb4>; - #clock-cells = <1>; - - clocks = <&clkc CLKID_AUDIO>, - <&clkc CLKID_MPLL0>, - <&clkc CLKID_MPLL1>, - <&clkc CLKID_MPLL2>, - <&clkc CLKID_MPLL3>, - <&clkc CLKID_HIFI_PLL>, - <&clkc CLKID_FCLK_DIV3>, - <&clkc CLKID_FCLK_DIV4>, - <&clkc CLKID_GP0_PLL>; - clock-names = "pclk", - "mst_in0", - "mst_in1", - "mst_in2", - "mst_in3", - "mst_in4", - "mst_in5", - "mst_in6", - "mst_in7"; - - resets = <&reset RESET_AUDIO>; - }; - - toddr_a: audio-controller@100 { - compatible = "amlogic,g12a-toddr", - "amlogic,axg-toddr"; - reg = <0x0 0x100 0x0 0x1c>; - #sound-dai-cells = <0>; - sound-name-prefix = "TODDR_A"; - interrupts = <GIC_SPI 148 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_TODDR_A>; - resets = <&arb AXG_ARB_TODDR_A>; - status = "disabled"; - }; - - toddr_b: audio-controller@140 { - compatible = "amlogic,g12a-toddr", - "amlogic,axg-toddr"; - reg = <0x0 0x140 0x0 0x1c>; - #sound-dai-cells = <0>; - sound-name-prefix = "TODDR_B"; - interrupts = <GIC_SPI 149 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_TODDR_B>; - resets = <&arb AXG_ARB_TODDR_B>; - status = "disabled"; - }; - - toddr_c: audio-controller@180 { - compatible = "amlogic,g12a-toddr", - "amlogic,axg-toddr"; - reg = <0x0 0x180 0x0 0x1c>; - #sound-dai-cells = <0>; - sound-name-prefix = "TODDR_C"; - interrupts = <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_TODDR_C>; - resets = <&arb AXG_ARB_TODDR_C>; - status = "disabled"; - }; - - frddr_a: audio-controller@1c0 { - compatible = "amlogic,g12a-frddr", - "amlogic,axg-frddr"; - reg = <0x0 0x1c0 0x0 0x1c>; - #sound-dai-cells = <0>; - sound-name-prefix = "FRDDR_A"; - interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_FRDDR_A>; - resets = <&arb AXG_ARB_FRDDR_A>; - status = "disabled"; - }; - - frddr_b: audio-controller@200 { - compatible = "amlogic,g12a-frddr", - "amlogic,axg-frddr"; - reg = <0x0 0x200 0x0 0x1c>; - #sound-dai-cells = <0>; - sound-name-prefix = "FRDDR_B"; - interrupts = <GIC_SPI 153 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_FRDDR_B>; - resets = <&arb AXG_ARB_FRDDR_B>; - status = "disabled"; - }; - - frddr_c: audio-controller@240 { - compatible = "amlogic,g12a-frddr", - "amlogic,axg-frddr"; - reg = <0x0 0x240 0x0 0x1c>; - #sound-dai-cells = <0>; - sound-name-prefix = "FRDDR_C"; - interrupts = <GIC_SPI 154 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_FRDDR_C>; - resets = <&arb AXG_ARB_FRDDR_C>; - status = "disabled"; - }; - - arb: reset-controller@280 { - status = "disabled"; - compatible = "amlogic,meson-axg-audio-arb"; - reg = <0x0 0x280 0x0 0x4>; - #reset-cells = <1>; - clocks = <&clkc_audio AUD_CLKID_DDR_ARB>; - }; - - tdmin_a: audio-controller@300 { - compatible = "amlogic,g12a-tdmin", - "amlogic,axg-tdmin"; - reg = <0x0 0x300 0x0 0x40>; - sound-name-prefix = "TDMIN_A"; - clocks = <&clkc_audio AUD_CLKID_TDMIN_A>, - <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmin_b: audio-controller@340 { - compatible = "amlogic,g12a-tdmin", - "amlogic,axg-tdmin"; - reg = <0x0 0x340 0x0 0x40>; - sound-name-prefix = "TDMIN_B"; - clocks = <&clkc_audio AUD_CLKID_TDMIN_B>, - <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmin_c: audio-controller@380 { - compatible = "amlogic,g12a-tdmin", - "amlogic,axg-tdmin"; - reg = <0x0 0x380 0x0 0x40>; - sound-name-prefix = "TDMIN_C"; - clocks = <&clkc_audio AUD_CLKID_TDMIN_C>, - <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmin_lb: audio-controller@3c0 { - compatible = "amlogic,g12a-tdmin", - "amlogic,axg-tdmin"; - reg = <0x0 0x3c0 0x0 0x40>; - sound-name-prefix = "TDMIN_LB"; - clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>, - <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>, - <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>, - <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - spdifin: audio-controller@400 { - compatible = "amlogic,g12a-spdifin", - "amlogic,axg-spdifin"; - reg = <0x0 0x400 0x0 0x30>; - #sound-dai-cells = <0>; - sound-name-prefix = "SPDIFIN"; - interrupts = <GIC_SPI 151 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_audio AUD_CLKID_SPDIFIN>, - <&clkc_audio AUD_CLKID_SPDIFIN_CLK>; - clock-names = "pclk", "refclk"; - status = "disabled"; - }; - - spdifout: audio-controller@480 { - compatible = "amlogic,g12a-spdifout", - "amlogic,axg-spdifout"; - reg = <0x0 0x480 0x0 0x50>; - #sound-dai-cells = <0>; - sound-name-prefix = "SPDIFOUT"; - clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>, - <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>; - clock-names = "pclk", "mclk"; - status = "disabled"; - }; - - tdmout_a: audio-controller@500 { - compatible = "amlogic,g12a-tdmout"; - reg = <0x0 0x500 0x0 0x40>; - sound-name-prefix = "TDMOUT_A"; - clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>, - <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmout_b: audio-controller@540 { - compatible = "amlogic,g12a-tdmout"; - reg = <0x0 0x540 0x0 0x40>; - sound-name-prefix = "TDMOUT_B"; - clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>, - <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - tdmout_c: audio-controller@580 { - compatible = "amlogic,g12a-tdmout"; - reg = <0x0 0x580 0x0 0x40>; - sound-name-prefix = "TDMOUT_C"; - clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>, - <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>, - <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>, - <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>; - clock-names = "pclk", "sclk", "sclk_sel", - "lrclk", "lrclk_sel"; - status = "disabled"; - }; - - spdifout_b: audio-controller@680 { - compatible = "amlogic,g12a-spdifout", - "amlogic,axg-spdifout"; - reg = <0x0 0x680 0x0 0x50>; - #sound-dai-cells = <0>; - sound-name-prefix = "SPDIFOUT_B"; - clocks = <&clkc_audio AUD_CLKID_SPDIFOUT_B>, - <&clkc_audio AUD_CLKID_SPDIFOUT_B_CLK>; - clock-names = "pclk", "mclk"; - status = "disabled"; - }; - - tohdmitx: audio-controller@744 { - compatible = "amlogic,g12a-tohdmitx"; - reg = <0x0 0x744 0x0 0x4>; - #sound-dai-cells = <1>; - sound-name-prefix = "TOHDMITX"; - status = "disabled"; - }; - }; - - usb3_pcie_phy: phy@46000 { - compatible = "amlogic,g12a-usb3-pcie-phy"; - reg = <0x0 0x46000 0x0 0x2000>; - clocks = <&clkc CLKID_PCIE_PLL>; - clock-names = "ref_clk"; - resets = <&reset RESET_PCIE_PHY>; - reset-names = "phy"; - assigned-clocks = <&clkc CLKID_PCIE_PLL>; - assigned-clock-rates = <100000000>; - #phy-cells = <1>; - }; - - eth_phy: mdio-multiplexer@4c000 { - compatible = "amlogic,g12a-mdio-mux"; - reg = <0x0 0x4c000 0x0 0xa4>; - clocks = <&clkc CLKID_ETH_PHY>, - <&xtal>, - <&clkc CLKID_MPLL_50M>; - clock-names = "pclk", "clkin0", "clkin1"; - mdio-parent-bus = <&mdio0>; - #address-cells = <1>; - #size-cells = <0>; - - ext_mdio: mdio@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - }; - - int_mdio: mdio@1 { - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - - internal_ephy: ethernet_phy@8 { - compatible = "ethernet-phy-id0180.3301", - "ethernet-phy-ieee802.3-c22"; - interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; - reg = <8>; - max-speed = <100>; - }; - }; - }; + opp-667000000 { + opp-hz = /bits/ 64 <666666666>; + opp-microvolt = <731000>; }; - aobus: bus@ff800000 { - compatible = "simple-bus"; - reg = <0x0 0xff800000 0x0 0x100000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>; - - rti: sys-ctrl@0 { - compatible = "amlogic,meson-gx-ao-sysctrl", - "simple-mfd", "syscon"; - reg = <0x0 0x0 0x0 0x100>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0x0 0x0 0x100>; - - clkc_AO: clock-controller { - compatible = "amlogic,meson-g12a-aoclkc"; - #clock-cells = <1>; - #reset-cells = <1>; - clocks = <&xtal>, <&clkc CLKID_CLK81>; - clock-names = "xtal", "mpeg-clk"; - }; - - pwrc_vpu: power-controller-vpu { - compatible = "amlogic,meson-g12a-pwrc-vpu"; - #power-domain-cells = <0>; - amlogic,hhi-sysctrl = <&hhi>; - resets = <&reset RESET_VIU>, - <&reset RESET_VENC>, - <&reset RESET_VCBUS>, - <&reset RESET_BT656>, - <&reset RESET_RDMA>, - <&reset RESET_VENCI>, - <&reset RESET_VENCP>, - <&reset RESET_VDAC>, - <&reset RESET_VDI6>, - <&reset RESET_VENCL>, - <&reset RESET_VID_LOCK>; - clocks = <&clkc CLKID_VPU>, - <&clkc CLKID_VAPB>; - clock-names = "vpu", "vapb"; - /* - * VPU clocking is provided by two identical clock paths - * VPU_0 and VPU_1 muxed to a single clock by a glitch - * free mux to safely change frequency while running. - * Same for VAPB but with a final gate after the glitch free mux. - */ - assigned-clocks = <&clkc CLKID_VPU_0_SEL>, - <&clkc CLKID_VPU_0>, - <&clkc CLKID_VPU>, /* Glitch free mux */ - <&clkc CLKID_VAPB_0_SEL>, - <&clkc CLKID_VAPB_0>, - <&clkc CLKID_VAPB_SEL>; /* Glitch free mux */ - assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>, - <0>, /* Do Nothing */ - <&clkc CLKID_VPU_0>, - <&clkc CLKID_FCLK_DIV4>, - <0>, /* Do Nothing */ - <&clkc CLKID_VAPB_0>; - assigned-clock-rates = <0>, /* Do Nothing */ - <666666666>, - <0>, /* Do Nothing */ - <0>, /* Do Nothing */ - <250000000>, - <0>; /* Do Nothing */ - }; - - ao_pinctrl: pinctrl@14 { - compatible = "amlogic,meson-g12a-aobus-pinctrl"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - gpio_ao: bank@14 { - reg = <0x0 0x14 0x0 0x8>, - <0x0 0x1c 0x0 0x8>, - <0x0 0x24 0x0 0x14>; - reg-names = "mux", - "ds", - "gpio"; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&ao_pinctrl 0 0 15>; - }; - - i2c_ao_sck_pins: i2c_ao_sck_pins { - mux { - groups = "i2c_ao_sck"; - function = "i2c_ao"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c_ao_sda_pins: i2c_ao_sda { - mux { - groups = "i2c_ao_sda"; - function = "i2c_ao"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c_ao_sck_e_pins: i2c_ao_sck_e { - mux { - groups = "i2c_ao_sck_e"; - function = "i2c_ao"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - i2c_ao_sda_e_pins: i2c_ao_sda_e { - mux { - groups = "i2c_ao_sda_e"; - function = "i2c_ao"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - mclk0_ao_pins: mclk0-ao { - mux { - groups = "mclk0_ao"; - function = "mclk0_ao"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_ao_b_din0_pins: tdm-ao-b-din0 { - mux { - groups = "tdm_ao_b_din0"; - function = "tdm_ao_b"; - bias-disable; - }; - }; - - spdif_ao_out_pins: spdif-ao-out { - mux { - groups = "spdif_ao_out"; - function = "spdif_ao_out"; - drive-strength-microamp = <500>; - bias-disable; - }; - }; - - tdm_ao_b_din1_pins: tdm-ao-b-din1 { - mux { - groups = "tdm_ao_b_din1"; - function = "tdm_ao_b"; - bias-disable; - }; - }; - - tdm_ao_b_din2_pins: tdm-ao-b-din2 { - mux { - groups = "tdm_ao_b_din2"; - function = "tdm_ao_b"; - bias-disable; - }; - }; - - tdm_ao_b_dout0_pins: tdm-ao-b-dout0 { - mux { - groups = "tdm_ao_b_dout0"; - function = "tdm_ao_b"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_ao_b_dout1_pins: tdm-ao-b-dout1 { - mux { - groups = "tdm_ao_b_dout1"; - function = "tdm_ao_b"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_ao_b_dout2_pins: tdm-ao-b-dout2 { - mux { - groups = "tdm_ao_b_dout2"; - function = "tdm_ao_b"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_ao_b_fs_pins: tdm-ao-b-fs { - mux { - groups = "tdm_ao_b_fs"; - function = "tdm_ao_b"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_ao_b_sclk_pins: tdm-ao-b-sclk { - mux { - groups = "tdm_ao_b_sclk"; - function = "tdm_ao_b"; - bias-disable; - drive-strength-microamp = <3000>; - }; - }; - - tdm_ao_b_slv_fs_pins: tdm-ao-b-slv-fs { - mux { - groups = "tdm_ao_b_slv_fs"; - function = "tdm_ao_b"; - bias-disable; - }; - }; - - tdm_ao_b_slv_sclk_pins: tdm-ao-b-slv-sclk { - mux { - groups = "tdm_ao_b_slv_sclk"; - function = "tdm_ao_b"; - bias-disable; - }; - }; - - uart_ao_a_pins: uart-a-ao { - mux { - groups = "uart_ao_a_tx", - "uart_ao_a_rx"; - function = "uart_ao_a"; - bias-disable; - }; - }; - - uart_ao_a_cts_rts_pins: uart-ao-a-cts-rts { - mux { - groups = "uart_ao_a_cts", - "uart_ao_a_rts"; - function = "uart_ao_a"; - bias-disable; - }; - }; - - pwm_ao_a_pins: pwm-ao-a { - mux { - groups = "pwm_ao_a"; - function = "pwm_ao_a"; - bias-disable; - }; - }; - - pwm_ao_b_pins: pwm-ao-b { - mux { - groups = "pwm_ao_b"; - function = "pwm_ao_b"; - bias-disable; - }; - }; - - pwm_ao_c_4_pins: pwm-ao-c-4 { - mux { - groups = "pwm_ao_c_4"; - function = "pwm_ao_c"; - bias-disable; - }; - }; - - pwm_ao_c_6_pins: pwm-ao-c-6 { - mux { - groups = "pwm_ao_c_6"; - function = "pwm_ao_c"; - bias-disable; - }; - }; - - pwm_ao_d_5_pins: pwm-ao-d-5 { - mux { - groups = "pwm_ao_d_5"; - function = "pwm_ao_d"; - bias-disable; - }; - }; - - pwm_ao_d_10_pins: pwm-ao-d-10 { - mux { - groups = "pwm_ao_d_10"; - function = "pwm_ao_d"; - bias-disable; - }; - }; - - pwm_ao_d_e_pins: pwm-ao-d-e { - mux { - groups = "pwm_ao_d_e"; - function = "pwm_ao_d"; - }; - }; - - remote_input_ao_pins: remote-input-ao { - mux { - groups = "remote_ao_input"; - function = "remote_ao_input"; - bias-disable; - }; - }; - }; - }; - - cec_AO: cec@100 { - compatible = "amlogic,meson-gx-ao-cec"; - reg = <0x0 0x00100 0x0 0x14>; - interrupts = <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_AO CLKID_AO_CEC>; - clock-names = "core"; - status = "disabled"; - }; - - sec_AO: ao-secure@140 { - compatible = "amlogic,meson-gx-ao-secure", "syscon"; - reg = <0x0 0x140 0x0 0x140>; - amlogic,has-chip-id; - }; - - cecb_AO: cec@280 { - compatible = "amlogic,meson-g12a-ao-cec"; - reg = <0x0 0x00280 0x0 0x1c>; - interrupts = <GIC_SPI 203 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc_AO CLKID_AO_CTS_OSCIN>; - clock-names = "oscin"; - status = "disabled"; - }; - - pwm_AO_cd: pwm@2000 { - compatible = "amlogic,meson-g12a-ao-pwm-cd"; - reg = <0x0 0x2000 0x0 0x20>; - #pwm-cells = <3>; - status = "disabled"; - }; - - uart_AO: serial@3000 { - compatible = "amlogic,meson-gx-uart", - "amlogic,meson-ao-uart"; - reg = <0x0 0x3000 0x0 0x18>; - interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>, <&clkc_AO CLKID_AO_UART>, <&xtal>; - clock-names = "xtal", "pclk", "baud"; - status = "disabled"; - }; - - uart_AO_B: serial@4000 { - compatible = "amlogic,meson-gx-uart", - "amlogic,meson-ao-uart"; - reg = <0x0 0x4000 0x0 0x18>; - interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>; - clock-names = "xtal", "pclk", "baud"; - status = "disabled"; - }; - - i2c_AO: i2c@5000 { - compatible = "amlogic,meson-axg-i2c"; - status = "disabled"; - reg = <0x0 0x05000 0x0 0x20>; - interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clkc CLKID_I2C>; - }; - - pwm_AO_ab: pwm@7000 { - compatible = "amlogic,meson-g12a-ao-pwm-ab"; - reg = <0x0 0x7000 0x0 0x20>; - #pwm-cells = <3>; - status = "disabled"; - }; - - ir: ir@8000 { - compatible = "amlogic,meson-gxbb-ir"; - reg = <0x0 0x8000 0x0 0x20>; - interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - }; - - saradc: adc@9000 { - compatible = "amlogic,meson-g12a-saradc", - "amlogic,meson-saradc"; - reg = <0x0 0x9000 0x0 0x48>; - #io-channel-cells = <1>; - interrupts = <GIC_SPI 200 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>, - <&clkc_AO CLKID_AO_SAR_ADC>, - <&clkc_AO CLKID_AO_SAR_ADC_CLK>, - <&clkc_AO CLKID_AO_SAR_ADC_SEL>; - clock-names = "clkin", "core", "adc_clk", "adc_sel"; - status = "disabled"; - }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <731000>; }; - vpu: vpu@ff900000 { - compatible = "amlogic,meson-g12a-vpu"; - reg = <0x0 0xff900000 0x0 0x100000>, - <0x0 0xff63c000 0x0 0x1000>; - reg-names = "vpu", "hhi"; - interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>; - #address-cells = <1>; - #size-cells = <0>; - amlogic,canvas = <&canvas>; - power-domains = <&pwrc_vpu>; - - /* CVBS VDAC output port */ - cvbs_vdac_port: port@0 { - reg = <0>; - }; - - /* HDMI-TX output port */ - hdmi_tx_port: port@1 { - reg = <1>; - - hdmi_tx_out: endpoint { - remote-endpoint = <&hdmi_tx_in>; - }; - }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <731000>; }; - gic: interrupt-controller@ffc01000 { - compatible = "arm,gic-400"; - reg = <0x0 0xffc01000 0 0x1000>, - <0x0 0xffc02000 0 0x2000>, - <0x0 0xffc04000 0 0x2000>, - <0x0 0xffc06000 0 0x2000>; - interrupt-controller; - interrupts = <GIC_PPI 9 - (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; - #interrupt-cells = <3>; - #address-cells = <0>; + opp-1398000000 { + opp-hz = /bits/ 64 <1398000000>; + opp-microvolt = <761000>; }; - cbus: bus@ffd00000 { - compatible = "simple-bus"; - reg = <0x0 0xffd00000 0x0 0x100000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x100000>; - - reset: reset-controller@1004 { - compatible = "amlogic,meson-g12a-reset", - "amlogic,meson-axg-reset"; - reg = <0x0 0x1004 0x0 0x9c>; - #reset-cells = <1>; - }; - - gpio_intc: interrupt-controller@f080 { - compatible = "amlogic,meson-g12a-gpio-intc", - "amlogic,meson-gpio-intc"; - reg = <0x0 0xf080 0x0 0x10>; - interrupt-controller; - #interrupt-cells = <2>; - amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>; - }; - - pwm_ef: pwm@19000 { - compatible = "amlogic,meson-g12a-ee-pwm"; - reg = <0x0 0x19000 0x0 0x20>; - #pwm-cells = <3>; - status = "disabled"; - }; - - pwm_cd: pwm@1a000 { - compatible = "amlogic,meson-g12a-ee-pwm"; - reg = <0x0 0x1a000 0x0 0x20>; - #pwm-cells = <3>; - status = "disabled"; - }; - - pwm_ab: pwm@1b000 { - compatible = "amlogic,meson-g12a-ee-pwm"; - reg = <0x0 0x1b000 0x0 0x20>; - #pwm-cells = <3>; - status = "disabled"; - }; - - i2c3: i2c@1c000 { - compatible = "amlogic,meson-axg-i2c"; - status = "disabled"; - reg = <0x0 0x1c000 0x0 0x20>; - interrupts = <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clkc CLKID_I2C>; - }; - - i2c2: i2c@1d000 { - compatible = "amlogic,meson-axg-i2c"; - status = "disabled"; - reg = <0x0 0x1d000 0x0 0x20>; - interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clkc CLKID_I2C>; - }; - - i2c1: i2c@1e000 { - compatible = "amlogic,meson-axg-i2c"; - status = "disabled"; - reg = <0x0 0x1e000 0x0 0x20>; - interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clkc CLKID_I2C>; - }; - - i2c0: i2c@1f000 { - compatible = "amlogic,meson-axg-i2c"; - status = "disabled"; - reg = <0x0 0x1f000 0x0 0x20>; - interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clkc CLKID_I2C>; - }; - - clk_msr: clock-measure@18000 { - compatible = "amlogic,meson-g12a-clk-measure"; - reg = <0x0 0x18000 0x0 0x10>; - }; - - uart_C: serial@22000 { - compatible = "amlogic,meson-gx-uart"; - reg = <0x0 0x22000 0x0 0x18>; - interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>; - clock-names = "xtal", "pclk", "baud"; - status = "disabled"; - }; - - uart_B: serial@23000 { - compatible = "amlogic,meson-gx-uart"; - reg = <0x0 0x23000 0x0 0x18>; - interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>; - clock-names = "xtal", "pclk", "baud"; - status = "disabled"; - }; - - uart_A: serial@24000 { - compatible = "amlogic,meson-gx-uart"; - reg = <0x0 0x24000 0x0 0x18>; - interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>; - clock-names = "xtal", "pclk", "baud"; - status = "disabled"; - }; - }; - - sd_emmc_a: sd@ffe03000 { - compatible = "amlogic,meson-axg-mmc"; - reg = <0x0 0xffe03000 0x0 0x800>; - interrupts = <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - clocks = <&clkc CLKID_SD_EMMC_A>, - <&clkc CLKID_SD_EMMC_A_CLK0>, - <&clkc CLKID_FCLK_DIV2>; - clock-names = "core", "clkin0", "clkin1"; - resets = <&reset RESET_SD_EMMC_A>; - amlogic,dram-access-quirk; - }; - - sd_emmc_b: sd@ffe05000 { - compatible = "amlogic,meson-axg-mmc"; - reg = <0x0 0xffe05000 0x0 0x800>; - interrupts = <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - clocks = <&clkc CLKID_SD_EMMC_B>, - <&clkc CLKID_SD_EMMC_B_CLK0>, - <&clkc CLKID_FCLK_DIV2>; - clock-names = "core", "clkin0", "clkin1"; - resets = <&reset RESET_SD_EMMC_B>; + opp-1512000000 { + opp-hz = /bits/ 64 <1512000000>; + opp-microvolt = <791000>; }; - sd_emmc_c: mmc@ffe07000 { - compatible = "amlogic,meson-axg-mmc"; - reg = <0x0 0xffe07000 0x0 0x800>; - interrupts = <GIC_SPI 191 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - clocks = <&clkc CLKID_SD_EMMC_C>, - <&clkc CLKID_SD_EMMC_C_CLK0>, - <&clkc CLKID_FCLK_DIV2>; - clock-names = "core", "clkin0", "clkin1"; - resets = <&reset RESET_SD_EMMC_C>; + opp-1608000000 { + opp-hz = /bits/ 64 <1608000000>; + opp-microvolt = <831000>; }; - usb: usb@ffe09000 { - status = "disabled"; - compatible = "amlogic,meson-g12a-usb-ctrl"; - reg = <0x0 0xffe09000 0x0 0xa0>; - interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - clocks = <&clkc CLKID_USB>; - resets = <&reset RESET_USB>; - - dr_mode = "otg"; - - phys = <&usb2_phy0>, <&usb2_phy1>, - <&usb3_pcie_phy PHY_TYPE_USB3>; - phy-names = "usb2-phy0", "usb2-phy1", "usb3-phy0"; - - dwc2: usb@ff400000 { - compatible = "amlogic,meson-g12a-usb", "snps,dwc2"; - reg = <0x0 0xff400000 0x0 0x40000>; - interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clkc CLKID_USB1_DDR_BRIDGE>; - clock-names = "ddr"; - phys = <&usb2_phy1>; - dr_mode = "peripheral"; - g-rx-fifo-size = <192>; - g-np-tx-fifo-size = <128>; - g-tx-fifo-size = <128 128 16 16 16>; - }; - - dwc3: usb@ff500000 { - compatible = "snps,dwc3"; - reg = <0x0 0xff500000 0x0 0x100000>; - interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; - dr_mode = "host"; - snps,dis_u2_susphy_quirk; - snps,quirk-frame-length-adjustment; - }; + opp-1704000000 { + opp-hz = /bits/ 64 <1704000000>; + opp-microvolt = <861000>; }; - mali: gpu@ffe40000 { - compatible = "amlogic,meson-g12a-mali", "arm,mali-bifrost"; - reg = <0x0 0xffe40000 0x0 0x40000>; - interrupt-parent = <&gic>; - interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "gpu", "mmu", "job"; - clocks = <&clkc CLKID_MALI>; - resets = <&reset RESET_DVALIN_CAPB3>, <&reset RESET_DVALIN>; - - /* - * Mali clocking is provided by two identical clock paths - * MALI_0 and MALI_1 muxed to a single clock by a glitch - * free mux to safely change frequency while running. - */ - assigned-clocks = <&clkc CLKID_MALI_0_SEL>, - <&clkc CLKID_MALI_0>, - <&clkc CLKID_MALI>; /* Glitch free mux */ - assigned-clock-parents = <&clkc CLKID_FCLK_DIV2P5>, - <0>, /* Do Nothing */ - <&clkc CLKID_MALI_0>; - assigned-clock-rates = <0>, /* Do Nothing */ - <800000000>, - <0>; /* Do Nothing */ + opp-1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <981000>; }; }; +}; - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 - (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 - (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 - (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 - (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>; - }; - - xtal: xtal-clk { - compatible = "fixed-clock"; - clock-frequency = <24000000>; - clock-output-names = "xtal"; - #clock-cells = <0>; - }; - +&sd_emmc_a { + amlogic,dram-access-quirk; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts new file mode 100644 index 000000000000..73128ed24361 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com> + */ + +/dts-v1/; + +#include "meson-g12b-a311d.dtsi" +#include "meson-g12b-khadas-vim3.dtsi" + +/ { + compatible = "khadas,vim3", "amlogic,a311d", "amlogic,g12b"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi new file mode 100644 index 000000000000..d61f43052a34 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi @@ -0,0 +1,149 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + */ + +#include "meson-g12b.dtsi" + +/ { + cpu_opp_table_0: opp-table-0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + opp-microvolt = <731000>; + }; + + opp-250000000 { + opp-hz = /bits/ 64 <250000000>; + opp-microvolt = <731000>; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <731000>; + }; + + opp-667000000 { + opp-hz = /bits/ 64 <667000000>; + opp-microvolt = <731000>; + }; + + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <761000>; + }; + + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <781000>; + }; + + opp-1398000000 { + opp-hz = /bits/ 64 <1398000000>; + opp-microvolt = <811000>; + }; + + opp-1512000000 { + opp-hz = /bits/ 64 <1512000000>; + opp-microvolt = <861000>; + }; + + opp-1608000000 { + opp-hz = /bits/ 64 <1608000000>; + opp-microvolt = <901000>; + }; + + opp-1704000000 { + opp-hz = /bits/ 64 <1704000000>; + opp-microvolt = <951000>; + }; + + opp-1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <1001000>; + }; + }; + + cpub_opp_table_1: opp-table-1 { + compatible = "operating-points-v2"; + opp-shared; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + opp-microvolt = <731000>; + }; + + opp-250000000 { + opp-hz = /bits/ 64 <250000000>; + opp-microvolt = <731000>; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <731000>; + }; + + opp-667000000 { + opp-hz = /bits/ 64 <667000000>; + opp-microvolt = <731000>; + }; + + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <731000>; + }; + + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <751000>; + }; + + opp-1398000000 { + opp-hz = /bits/ 64 <1398000000>; + opp-microvolt = <771000>; + }; + + opp-1512000000 { + opp-hz = /bits/ 64 <1512000000>; + opp-microvolt = <771000>; + }; + + opp-1608000000 { + opp-hz = /bits/ 64 <1608000000>; + opp-microvolt = <781000>; + }; + + opp-1704000000 { + opp-hz = /bits/ 64 <1704000000>; + opp-microvolt = <791000>; + }; + + opp-1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <831000>; + }; + + opp-1908000000 { + opp-hz = /bits/ 64 <1908000000>; + opp-microvolt = <861000>; + }; + + opp-2016000000 { + opp-hz = /bits/ 64 <2016000000>; + opp-microvolt = <911000>; + }; + + opp-2108000000 { + opp-hz = /bits/ 64 <2108000000>; + opp-microvolt = <951000>; + }; + + opp-2208000000 { + opp-hz = /bits/ 64 <2208000000>; + opp-microvolt = <1011000>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi new file mode 100644 index 000000000000..9c3ca2edc725 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi @@ -0,0 +1,544 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com> + */ + +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/meson-g12a-gpio.h> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> + +/ { + model = "Khadas VIM3"; + + aliases { + serial0 = &uart_AO; + ethernet0 = ðmac; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 2>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1710000>; + + button-function { + label = "Function"; + linux,code = <KEY_FN>; + press-threshold-microvolt = <10000>; + }; + }; + + leds { + compatible = "gpio-leds"; + + white { + label = "vim3:white:sys"; + gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + + red { + label = "vim3:red"; + gpios = <&gpio_expander 5 GPIO_ACTIVE_LOW>; + }; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + power-button { + label = "power"; + linux,code = <KEY_POWER>; + gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_LOW>; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; + + dc_in: regulator-dc_in { + compatible = "regulator-fixed"; + regulator-name = "DC_IN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + vcc_5v: regulator-vcc_5v { + compatible = "regulator-fixed"; + regulator-name = "VCC_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_in>; + + gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; + enable-active-high; + }; + + vcc_1v8: regulator-vcc_1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vsys_3v3>; + regulator-always-on; + /* FIXME: actually controlled by VDDCPU_B_EN */ + }; + + vddcpu_a: regulator-vddcpu-a { + /* + * MP8756GD Regulator. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU_A"; + regulator-min-microvolt = <690000>; + regulator-max-microvolt = <1050000>; + + vin-supply = <&dc_in>; + + pwms = <&pwm_ab 0 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + + vddcpu_b: regulator-vddcpu-b { + /* + * Silergy SY8030DEC Regulator. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU_B"; + regulator-min-microvolt = <690000>; + regulator-max-microvolt = <1050000>; + + vin-supply = <&vsys_3v3>; + + pwms = <&pwm_AO_cd 1 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + + vddao_1v8: regulator-vddao_1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vsys_3v3>; + regulator-always-on; + }; + + emmc_1v8: regulator-emmc_1v8 { + compatible = "regulator-fixed"; + regulator-name = "EMMC_AO1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; + + vsys_3v3: regulator-vsys_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VSYS_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_in>; + regulator-always-on; + }; + + usb_pwr: regulator-usb_pwr { + compatible = "regulator-fixed"; + regulator-name = "USB_PWR"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_5v>; + + gpio = <&gpio GPIOA_6 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "G12A-KHADAS-VIM3"; + audio-aux-devs = <&tdmout_b>; + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-3 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + }; + + /* hdmi glue */ + dai-link-4 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&arb { + status = "okay"; +}; + +&cec_AO { + pinctrl-0 = <&cec_ao_a_h_pins>; + pinctrl-names = "default"; + status = "disabled"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cecb_AO { + pinctrl-0 = <&cec_ao_b_h_pins>; + pinctrl-names = "default"; + status = "okay"; + hdmi-phandle = <&hdmi_tx>; +}; + +&clkc_audio { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table_0>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu1 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table_0>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu100 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu101 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu102 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu103 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&ext_mdio { + external_phy: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + max-speed = <1000>; + + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_14 */ + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +ðmac { + pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; + pinctrl-names = "default"; + status = "okay"; + phy-mode = "rgmii"; + phy-handle = <&external_phy>; + amlogic,tx-delay-ns = <2>; +}; + +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; + pinctrl-names = "default"; + hdmi-supply = <&vcc_5v>; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +&i2c_AO { + status = "okay"; + pinctrl-0 = <&i2c_ao_sck_pins>, <&i2c_ao_sda_pins>; + pinctrl-names = "default"; + + gpio_expander: gpio-controller@20 { + compatible = "ti,tca6408"; + reg = <0x20>; + vcc-supply = <&vcc_3v3>; + gpio-controller; + #gpio-cells = <2>; + }; + + rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + }; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; + linux,rc-map-name = "rc-khadas"; +}; + +&pwm_ab { + pinctrl-0 = <&pwm_a_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin0"; + status = "okay"; +}; + +&pwm_AO_cd { + pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; + status = "okay"; +}; + +&pwm_ef { + status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; +}; + +&saradc { + status = "okay"; + vref-supply = <&vddao_1v8>; +}; + +/* SDIO */ +&sd_emmc_a { + status = "okay"; + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + cap-sd-highspeed; + sd-uhs-sdr50; + max-frequency = <100000000>; + + non-removable; + disable-wp; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vsys_3v3>; + vqmmc-supply = <&vddao_1v8>; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_c_pins>; + pinctrl-1 = <&sdcard_clk_gate_c_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vsys_3v3>; + vqmmc-supply = <&vsys_3v3>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + max-frequency = <200000000>; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&emmc_1v8>; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; + +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + clocks = <&wifi32k>; + clock-names = "lpo"; + }; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +&usb2_phy0 { + phy-supply = <&dc_in>; +}; + +&usb2_phy1 { + phy-supply = <&usb_pwr>; +}; + +&usb3_pcie_phy { + phy-supply = <&usb_pwr>; +}; + +&usb { + status = "okay"; + dr_mode = "peripheral"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts index 81780ffcc7f0..6cfc2c69bb4f 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts @@ -6,7 +6,7 @@ /dts-v1/; -#include "meson-g12b.dtsi" +#include "meson-g12b-s922x.dtsi" #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/meson-g12a-gpio.h> #include <dt-bindings/sound/meson-g12a-tohdmitx.h> @@ -53,6 +53,7 @@ gpio = <&gpio_ao GPIOAO_8 GPIO_ACTIVE_HIGH>; enable-active-high; + regulator-always-on; }; tf_io: gpio-regulator-tf_io { @@ -114,6 +115,44 @@ /* FIXME: actually controlled by VDDCPU_B_EN */ }; + vddcpu_a: regulator-vddcpu-a { + /* + * MP8756GD Regulator. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU_A"; + regulator-min-microvolt = <721000>; + regulator-max-microvolt = <1022000>; + + vin-supply = <&main_12v>; + + pwms = <&pwm_ab 0 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + + vddcpu_b: regulator-vddcpu-b { + /* + * Silergy SY8120B1ABC Regulator. + */ + compatible = "pwm-regulator"; + + regulator-name = "VDDCPU_B"; + regulator-min-microvolt = <721000>; + regulator-max-microvolt = <1022000>; + + vin-supply = <&main_12v>; + + pwms = <&pwm_AO_cd 1 1250 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + hub_5v: regulator-hub_5v { compatible = "regulator-fixed"; regulator-name = "HUB_5V"; @@ -245,6 +284,48 @@ status = "okay"; }; +&cpu0 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table_0>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu1 { + cpu-supply = <&vddcpu_b>; + operating-points-v2 = <&cpu_opp_table_0>; + clocks = <&clkc CLKID_CPU_CLK>; + clock-latency = <50000>; +}; + +&cpu100 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu101 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu102 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + +&cpu103 { + cpu-supply = <&vddcpu_a>; + operating-points-v2 = <&cpub_opp_table_1>; + clocks = <&clkc CLKID_CPUB_CLK>; + clock-latency = <50000>; +}; + &ext_mdio { external_phy: ethernet-phy@0 { /* Realtek RTL8211F (0x001cc916) */ @@ -316,6 +397,22 @@ pinctrl-names = "default"; }; +&pwm_ab { + pinctrl-0 = <&pwm_a_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin0"; + status = "okay"; +}; + +&pwm_AO_cd { + pinctrl-0 = <&pwm_ao_d_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin1"; + status = "okay"; +}; + /* SD card */ &sd_emmc_b { status = "okay"; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-s922x-khadas-vim3.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x-khadas-vim3.dts new file mode 100644 index 000000000000..6bcf972b8bfa --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x-khadas-vim3.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com> + */ + +/dts-v1/; + +#include "meson-g12b-s922x.dtsi" +#include "meson-g12b-khadas-vim3.dtsi" + +/ { + compatible = "khadas,vim3", "amlogic,s922x", "amlogic,g12b"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi new file mode 100644 index 000000000000..046cc332d07f --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi @@ -0,0 +1,124 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + */ + +#include "meson-g12b.dtsi" + +/ { + cpu_opp_table_0: opp-table-0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + opp-microvolt = <731000>; + }; + + opp-250000000 { + opp-hz = /bits/ 64 <250000000>; + opp-microvolt = <731000>; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <731000>; + }; + + opp-667000000 { + opp-hz = /bits/ 64 <667000000>; + opp-microvolt = <731000>; + }; + + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <731000>; + }; + + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <731000>; + }; + + opp-1398000000 { + opp-hz = /bits/ 64 <1398000000>; + opp-microvolt = <761000>; + }; + + opp-1512000000 { + opp-hz = /bits/ 64 <1512000000>; + opp-microvolt = <791000>; + }; + + opp-1608000000 { + opp-hz = /bits/ 64 <1608000000>; + opp-microvolt = <831000>; + }; + + opp-1704000000 { + opp-hz = /bits/ 64 <1704000000>; + opp-microvolt = <861000>; + }; + + opp-1896000000 { + opp-hz = /bits/ 64 <1896000000>; + opp-microvolt = <981000>; + }; + }; + + cpub_opp_table_1: opp-table-1 { + compatible = "operating-points-v2"; + opp-shared; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + opp-microvolt = <751000>; + }; + + opp-250000000 { + opp-hz = /bits/ 64 <250000000>; + opp-microvolt = <751000>; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <751000>; + }; + + opp-667000000 { + opp-hz = /bits/ 64 <667000000>; + opp-microvolt = <751000>; + }; + + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <771000>; + }; + + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <771000>; + }; + + opp-1398000000 { + opp-hz = /bits/ 64 <1398000000>; + opp-microvolt = <791000>; + }; + + opp-1512000000 { + opp-hz = /bits/ 64 <1512000000>; + opp-microvolt = <821000>; + }; + + opp-1608000000 { + opp-hz = /bits/ 64 <1608000000>; + opp-microvolt = <861000>; + }; + + opp-1704000000 { + opp-hz = /bits/ 64 <1704000000>; + opp-microvolt = <891000>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi index 9e88e513b22d..d5edbc1a1991 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi @@ -4,12 +4,15 @@ * Author: Neil Armstrong <narmstrong@baylibre.com> */ -#include "meson-g12a.dtsi" +#include "meson-g12-common.dtsi" / { compatible = "amlogic,g12b"; cpus { + #address-cells = <0x2>; + #size-cells = <0x0>; + cpu-map { cluster0 { core0 { @@ -40,8 +43,21 @@ }; }; - /delete-node/ cpu@2; - /delete-node/ cpu@3; + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x1>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; cpu100: cpu@100 { device_type = "cpu"; @@ -74,9 +90,17 @@ enable-method = "psci"; next-level-cache = <&l2>; }; + + l2: l2-cache0 { + compatible = "cache"; + }; }; }; &clkc { compatible = "amlogic,g12b-clkc"; }; + +&sd_emmc_a { + amlogic,dram-access-quirk; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index 74d03fc706be..ca4b834c65d8 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -437,6 +437,20 @@ }; }; + vdec: video-codec@c8820000 { + compatible = "amlogic,gx-vdec"; + reg = <0x0 0xc8820000 0x0 0x10000>, + <0x0 0xc110a580 0x0 0xe4>; + reg-names = "dos", "esparser"; + + interrupts = <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "vdec", "esparser"; + + amlogic,ao-sysctrl = <&sysctrl_AO>; + amlogic,canvas = <&canvas>; + }; + periphs: periphs@c8834000 { compatible = "simple-bus"; reg = <0x0 0xc8834000 0x0 0x2000>; @@ -493,6 +507,8 @@ 0x0 0xc8834540 0x0 0x4>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; + rx-fifo-depth = <4096>; + tx-fifo-depth = <2048>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index f734faaf7b78..0cb40326b0d3 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi @@ -845,3 +845,14 @@ compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu"; power-domains = <&pwrc_vpu>; }; + +&vdec { + compatible = "amlogic,gxbb-vdec", "amlogic,gx-vdec"; + clocks = <&clkc CLKID_DOS_PARSER>, + <&clkc CLKID_DOS>, + <&clkc CLKID_VDEC_1>, + <&clkc CLKID_VDEC_HEVC>; + clock-names = "dos_parser", "dos", "vdec_1", "vdec_hevc"; + resets = <&reset RESET_PARSER>; + reset-names = "esparser"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index c959456bacc6..a09c53aaa0e8 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi @@ -848,3 +848,14 @@ compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu"; power-domains = <&pwrc_vpu>; }; + +&vdec { + compatible = "amlogic,gxl-vdec", "amlogic,gx-vdec"; + clocks = <&clkc CLKID_DOS_PARSER>, + <&clkc CLKID_DOS>, + <&clkc CLKID_VDEC_1>, + <&clkc CLKID_VDEC_HEVC>; + clock-names = "dos_parser", "dos", "vdec_1", "vdec_hevc"; + resets = <&reset RESET_PARSER>; + reset-names = "esparser"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi index 7a85a82bf65d..a0e677d5a8f7 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi @@ -144,3 +144,7 @@ &dwc3 { phys = <&usb3_phy>, <&usb2_phy0>, <&usb2_phy1>, <&usb2_phy2>; }; + +&vdec { + compatible = "amlogic,gxm-vdec", "amlogic,gx-vdec"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts new file mode 100644 index 000000000000..5700cd73fefc --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts @@ -0,0 +1,300 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre SAS. All rights reserved. + */ + +/dts-v1/; + +#include "meson-sm1.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/meson-g12a-gpio.h> + +/ { + compatible = "seirobotics,sei610", "amlogic,sm1"; + model = "SEI Robotics SEI610"; + + aliases { + serial0 = &uart_AO; + ethernet0 = ðmac; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; + }; + + gpio-keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + key1 { + label = "A"; + linux,code = <BTN_0>; + gpios = <&gpio GPIOH_6 GPIO_ACTIVE_LOW>; + }; + + key2 { + label = "B"; + linux,code = <BTN_1>; + gpios = <&gpio GPIOH_7 GPIO_ACTIVE_LOW>; + }; + + key3 { + label = "C"; + linux,code = <BTN_2>; + gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + bluetooth { + label = "sei610:blue:bt"; + gpios = <&gpio GPIOC_7 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + default-state = "off"; + }; + }; + + pwmleds { + compatible = "pwm-leds"; + + power { + label = "sei610:red:power"; + pwms = <&pwm_AO_ab 0 30518 0>; + max-brightness = <255>; + linux,default-trigger = "default-on"; + active-low; + }; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + + ao_5v: regulator-ao_5v { + compatible = "regulator-fixed"; + regulator-name = "AO_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_in>; + regulator-always-on; + }; + + dc_in: regulator-dc_in { + compatible = "regulator-fixed"; + regulator-name = "DC_IN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + emmc_1v8: regulator-emmc_1v8 { + compatible = "regulator-fixed"; + regulator-name = "EMMC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&dc_in>; + regulator-always-on; + }; + + /* Used by Tuner, RGB Led & IR Emitter LED array */ + vddao_3v3_t: regulator-vddao_3v3_t { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3_T"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>; + enable-active-low; + regulator-always-on; + }; + + vddio_ao1v8: regulator-vddio_ao1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + reserved-memory { + /* TEE Reserved Memory */ + bl32_reserved: bl32@5000000 { + reg = <0x0 0x05300000 0x0 0x2000000>; + no-map; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; +}; + +&cec_AO { + pinctrl-0 = <&cec_ao_a_h_pins>; + pinctrl-names = "default"; + status = "disabled"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cecb_AO { + pinctrl-0 = <&cec_ao_b_h_pins>; + pinctrl-names = "default"; + status = "okay"; + hdmi-phandle = <&hdmi_tx>; +}; + +ðmac { + status = "okay"; + phy-handle = <&internal_ephy>; + phy-mode = "rmii"; +}; + +&i2c3 { + status = "okay"; + pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; + pinctrl-names = "default"; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +&pwm_AO_ab { + status = "okay"; + pinctrl-0 = <&pwm_ao_a_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin0"; +}; + +&pwm_ef { + status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin0"; +}; + +&saradc { + status = "okay"; + vref-supply = <&vddio_ao1v8>; +}; + +/* SDIO */ +&sd_emmc_a { + status = "okay"; + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + cap-sd-highspeed; + sd-uhs-sdr50; + max-frequency = <100000000>; + + non-removable; + disable-wp; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_ao1v8>; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_c_pins>; + pinctrl-1 = <&sdcard_clk_gate_c_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddao_3v3>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + max-frequency = <200000000>; + non-removable; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&emmc_1v8>; +}; + +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + clocks = <&wifi32k>; + clock-names = "lpo"; + vbat-supply = <&vddao_3v3>; + vddio-supply = <&vddio_ao1v8>; + }; +}; + +/* Exposed via the on-board USB to Serial FT232RL IC */ +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi new file mode 100644 index 000000000000..e902d4f9165f --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi @@ -0,0 +1,68 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + */ + +#include "meson-g12-common.dtsi" + +/ { + compatible = "amlogic,sm1"; + + cpus { + #address-cells = <0x2>; + #size-cells = <0x0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x1>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x2>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0 0x3>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + l2: l2-cache0 { + compatible = "cache"; + }; + }; +}; + +&cecb_AO { + compatible = "amlogic,meson-sm1-ao-cec"; +}; + +&clk_msr { + compatible = "amlogic,meson-sm1-clk-measure"; +}; + +&pwrc_vpu { + status = "disabled"; +}; + +&vpu { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/arm/fvp-base-revc.dts b/arch/arm64/boot/dts/arm/fvp-base-revc.dts index 687707020ec1..62ab0d54ff71 100644 --- a/arch/arm64/boot/dts/arm/fvp-base-revc.dts +++ b/arch/arm64/boot/dts/arm/fvp-base-revc.dts @@ -265,13 +265,5 @@ <0 0 42 &gic 0 0 GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, <0 0 43 &gic 0 0 GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, <0 0 44 &gic 0 0 GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; - - motherboard { - iofpga@3,00000000 { - clcd@1f0000 { - max-memory-bandwidth = <130000000>; /* 16bpp @ 63.5MHz */ - }; - }; - }; }; }; diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi index 454cf6c44c49..03a7bf079c8f 100644 --- a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi +++ b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi @@ -188,8 +188,6 @@ interrupts = <14>; clocks = <&v2m_oscclk1>, <&v2m_clk24mhz>; clock-names = "clcdclk", "apb_pclk"; - /* 800x600 16bpp @36MHz works fine */ - max-memory-bandwidth = <54000000>; memory-region = <&vram>; port { diff --git a/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h b/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h index e25f7fcd7997..cffa8991880d 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h +++ b/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h @@ -462,7 +462,7 @@ #define MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x1CC 0x434 0x000 0x5 0x0 #define MX8MM_IOMUXC_SAI3_RXFS_TPSMP_HTRANS0 0x1CC 0x434 0x000 0x7 0x0 #define MX8MM_IOMUXC_SAI3_RXC_SAI3_RX_BCLK 0x1D0 0x438 0x000 0x0 0x0 -#define MX8MM_IOMUXC_SAI3_RXC_GPT1_CAPTURE2 0x1D0 0x438 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SAI3_RXC_GPT1_CLK 0x1D0 0x438 0x000 0x1 0x0 #define MX8MM_IOMUXC_SAI3_RXC_SAI5_RX_BCLK 0x1D0 0x438 0x4D0 0x2 0x2 #define MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29 0x1D0 0x438 0x000 0x5 0x0 #define MX8MM_IOMUXC_SAI3_RXC_TPSMP_HTRANS1 0x1D0 0x438 0x000 0x7 0x0 @@ -472,7 +472,7 @@ #define MX8MM_IOMUXC_SAI3_RXD_GPIO4_IO30 0x1D4 0x43C 0x000 0x5 0x0 #define MX8MM_IOMUXC_SAI3_RXD_TPSMP_HDATA0 0x1D4 0x43C 0x000 0x7 0x0 #define MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0x1D8 0x440 0x000 0x0 0x0 -#define MX8MM_IOMUXC_SAI3_TXFS_GPT1_CLK 0x1D8 0x440 0x000 0x1 0x0 +#define MX8MM_IOMUXC_SAI3_TXFS_GPT1_CAPTURE2 0x1D8 0x440 0x000 0x1 0x0 #define MX8MM_IOMUXC_SAI3_TXFS_SAI5_RX_DATA1 0x1D8 0x440 0x4D8 0x2 0x2 #define MX8MM_IOMUXC_SAI3_TXFS_GPIO4_IO31 0x1D8 0x440 0x000 0x5 0x0 #define MX8MM_IOMUXC_SAI3_TXFS_TPSMP_HDATA1 0x1D8 0x440 0x000 0x7 0x0 diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index d09b808eff87..52aae341d0da 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -715,8 +715,7 @@ sai2: sai@308b0000 { #sound-dai-cells = <0>; - compatible = "fsl,imx8mq-sai", - "fsl,imx6sx-sai"; + compatible = "fsl,imx8mq-sai"; reg = <0x308b0000 0x10000>; interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX8MQ_CLK_SAI2_IPG>, diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi index e4ceb3a73c81..36abc25320a8 100644 --- a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi +++ b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi @@ -249,6 +249,8 @@ #dma-cells = <1>; #dma-channels = <8>; #dma-requests = <32>; + resets = <&rst DMA_RESET>, <&rst DMA_OCP_RESET>; + reset-names = "dma", "dma-ocp"; }; rst: rstmgr@ffd11000 { diff --git a/arch/arm64/boot/dts/renesas/hihope-common.dtsi b/arch/arm64/boot/dts/renesas/hihope-common.dtsi index 3311a982fff8..e1b95c31eeb7 100644 --- a/arch/arm64/boot/dts/renesas/hihope-common.dtsi +++ b/arch/arm64/boot/dts/renesas/hihope-common.dtsi @@ -10,6 +10,7 @@ / { aliases { serial0 = &scif2; + serial1 = &hscif0; }; chosen { @@ -31,6 +32,13 @@ leds { compatible = "gpio-leds"; + bt_active_led { + label = "blue:bt"; + gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "hci0-power"; + default-state = "off"; + }; + led0 { gpios = <&gpio6 11 GPIO_ACTIVE_HIGH>; }; @@ -46,6 +54,13 @@ led3 { gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; }; + + wlan_active_led { + label = "yellow:wlan"; + gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; }; reg_1p8v: regulator0 { @@ -66,6 +81,14 @@ regulator-always-on; }; + sound_card: sound { + compatible = "audio-graph-card"; + + label = "rcar-sound"; + + dais = <&rsnd_port0>; + }; + vbus0_usb2: regulator-vbus0-usb2 { compatible = "regulator-fixed"; @@ -90,6 +113,17 @@ 1800000 0>; }; + wlan_en_reg: regulator-wlan_en { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + startup-delay-us = <70000>; + + gpio = <&gpio_expander 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + x302_clk: x302-clock { compatible = "fixed-clock"; #clock-cells = <0>; @@ -103,6 +137,10 @@ }; }; +&audio_clk_a { + clock-frequency = <22579200>; +}; + &du { clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, @@ -150,6 +188,25 @@ remote-endpoint = <&hdmi0_con>; }; }; + port@2 { + reg = <2>; + dw_hdmi0_snd_in: endpoint { + remote-endpoint = <&rsnd_endpoint0>; + }; + }; + }; +}; + +&hscif0 { + pinctrl-0 = <&hscif0_pins>; + pinctrl-names = "default"; + + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "ti,wl1837-st"; + enable-gpios = <&gpio_expander 2 GPIO_ACTIVE_HIGH>; }; }; @@ -162,6 +219,13 @@ clock-frequency = <400000>; status = "okay"; + gpio_expander: gpio@20 { + compatible = "onnn,pca9654"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + versaclock5: clock-generator@6a { compatible = "idt,5p49v5923"; reg = <0x6a>; @@ -187,6 +251,11 @@ pinctrl-0 = <&scif_clk_pins>; pinctrl-names = "default"; + hscif0_pins: hscif0 { + groups = "hscif0_data", "hscif0_ctrl"; + function = "hscif0"; + }; + scif2_pins: scif2 { groups = "scif2_data_a"; function = "scif2"; @@ -209,12 +278,23 @@ power-source = <1800>; }; + sdhi2_pins: sd2 { + groups = "sdhi2_data4", "sdhi2_ctrl"; + function = "sdhi2"; + power-source = <1800>; + }; + sdhi3_pins: sd3 { groups = "sdhi3_data8", "sdhi3_ctrl", "sdhi3_ds"; function = "sdhi3"; power-source = <1800>; }; + sound_clk_pins: sound_clk { + groups = "audio_clk_a_a"; + function = "audio_clk"; + }; + usb0_pins: usb0 { groups = "usb0"; function = "usb0"; @@ -238,6 +318,30 @@ }; }; +&rcar_sound { + pinctrl-0 = <&sound_clk_pins>; + pinctrl-names = "default"; + + status = "okay"; + + /* Single DAI */ + #sound-dai-cells = <0>; + + ports { + rsnd_port0: port@0 { + rsnd_endpoint0: endpoint { + remote-endpoint = <&dw_hdmi0_snd_in>; + + dai-format = "i2s"; + bitclock-master = <&rsnd_endpoint0>; + frame-master = <&rsnd_endpoint0>; + + playback = <&ssi2>; + }; + }; + }; +}; + &rwdt { timeout-sec = <60>; status = "okay"; @@ -268,6 +372,27 @@ status = "okay"; }; +&sdhi2 { + status = "okay"; + pinctrl-0 = <&sdhi2_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&wlan_en_reg>; + bus-width = <4>; + non-removable; + cap-power-off-card; + keep-power-in-suspend; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1837"; + reg = <2>; + interrupt-parent = <&gpio2>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + &sdhi3 { pinctrl-0 = <&sdhi3_pins>; pinctrl-1 = <&sdhi3_pins>; diff --git a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi index 07a6eeaed12e..4280b190dc68 100644 --- a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi +++ b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi @@ -31,6 +31,18 @@ }; }; +&can0 { + pinctrl-0 = <&can0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&can1 { + pinctrl-0 = <&can1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + &pciec0 { status = "okay"; }; @@ -60,4 +72,14 @@ drive-strength = <12>; }; }; + + can0_pins: can0 { + groups = "can0_data_a"; + function = "can0"; + }; + + can1_pins: can1 { + groups = "can1_data"; + function = "can1"; + }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi index f209457c7807..06c7c849c8ab 100644 --- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi @@ -1128,6 +1128,8 @@ <&cpg CPG_CORE R8A774A1_CLK_CANFD>, <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A774A1_CLK_CANFD>; + assigned-clock-rates = <40000000>; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 916>; status = "disabled"; @@ -1142,11 +1144,38 @@ <&cpg CPG_CORE R8A774A1_CLK_CANFD>, <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A774A1_CLK_CANFD>; + assigned-clock-rates = <40000000>; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 915>; status = "disabled"; }; + canfd: can@e66c0000 { + compatible = "renesas,r8a774a1-canfd", + "renesas,rcar-gen3-canfd"; + reg = <0 0xe66c0000 0 0x8000>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 914>, + <&cpg CPG_CORE R8A774A1_CLK_CANFD>, + <&can_clk>; + clock-names = "fck", "canfd", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A774A1_CLK_CANFD>; + assigned-clock-rates = <40000000>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 914>; + status = "disabled"; + + channel0 { + status = "disabled"; + }; + + channel1 { + status = "disabled"; + }; + }; + pwm0: pwm@e6e30000 { compatible = "renesas,pwm-r8a774a1", "renesas,pwm-rcar"; reg = <0 0xe6e30000 0 0x8>; @@ -1653,7 +1682,7 @@ <0 0xec5a0000 0 0x100>, /* ADG */ <0 0xec540000 0 0x1000>, /* SSIU */ <0 0xec541000 0 0x280>, /* SSI */ - <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ + <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; clocks = <&cpg CPG_MOD 1005>, @@ -1697,6 +1726,28 @@ "ssi.1", "ssi.0"; status = "disabled"; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + }; + port@1 { + reg = <1>; + }; + }; + + rcar_sound,ctu { + ctu00: ctu-0 { }; + ctu01: ctu-1 { }; + ctu02: ctu-2 { }; + ctu03: ctu-3 { }; + ctu10: ctu-4 { }; + ctu11: ctu-5 { }; + ctu12: ctu-6 { }; + ctu13: ctu-7 { }; + }; + rcar_sound,dvc { dvc0: dvc-0 { dmas = <&audma1 0xbc>; @@ -1713,17 +1764,6 @@ mix1: mix-1 { }; }; - rcar_sound,ctu { - ctu00: ctu-0 { }; - ctu01: ctu-1 { }; - ctu02: ctu-2 { }; - ctu03: ctu-3 { }; - ctu10: ctu-4 { }; - ctu11: ctu-5 { }; - ctu12: ctu-6 { }; - ctu13: ctu-7 { }; - }; - rcar_sound,src { src0: src-0 { interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; @@ -1780,64 +1820,264 @@ rcar_sound,ssi { ssi0: ssi-0 { interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x01>, <&audma1 0x02>; + dma-names = "rx", "tx"; }; ssi1: ssi-1 { interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x03>, <&audma1 0x04>; + dma-names = "rx", "tx"; }; ssi2: ssi-2 { interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x05>, <&audma1 0x06>; + dma-names = "rx", "tx"; }; ssi3: ssi-3 { interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x07>, <&audma1 0x08>; + dma-names = "rx", "tx"; }; ssi4: ssi-4 { interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x09>, <&audma1 0x0a>; + dma-names = "rx", "tx"; }; ssi5: ssi-5 { interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x0b>, <&audma1 0x0c>; + dma-names = "rx", "tx"; }; ssi6: ssi-6 { interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x0d>, <&audma1 0x0e>; + dma-names = "rx", "tx"; }; ssi7: ssi-7 { interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x0f>, <&audma1 0x10>; + dma-names = "rx", "tx"; }; ssi8: ssi-8 { interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x11>, <&audma1 0x12>; + dma-names = "rx", "tx"; }; ssi9: ssi-9 { interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>; - dma-names = "rx", "tx", "rxu", "txu"; + dmas = <&audma0 0x13>, <&audma1 0x14>; + dma-names = "rx", "tx"; }; }; - ports { - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; + rcar_sound,ssiu { + ssiu00: ssiu-0 { + dmas = <&audma0 0x15>, <&audma1 0x16>; + dma-names = "rx", "tx"; }; - port@1 { - reg = <1>; + ssiu01: ssiu-1 { + dmas = <&audma0 0x35>, <&audma1 0x36>; + dma-names = "rx", "tx"; + }; + ssiu02: ssiu-2 { + dmas = <&audma0 0x37>, <&audma1 0x38>; + dma-names = "rx", "tx"; + }; + ssiu03: ssiu-3 { + dmas = <&audma0 0x47>, <&audma1 0x48>; + dma-names = "rx", "tx"; + }; + ssiu04: ssiu-4 { + dmas = <&audma0 0x3F>, <&audma1 0x40>; + dma-names = "rx", "tx"; + }; + ssiu05: ssiu-5 { + dmas = <&audma0 0x43>, <&audma1 0x44>; + dma-names = "rx", "tx"; + }; + ssiu06: ssiu-6 { + dmas = <&audma0 0x4F>, <&audma1 0x50>; + dma-names = "rx", "tx"; + }; + ssiu07: ssiu-7 { + dmas = <&audma0 0x53>, <&audma1 0x54>; + dma-names = "rx", "tx"; + }; + ssiu10: ssiu-8 { + dmas = <&audma0 0x49>, <&audma1 0x4a>; + dma-names = "rx", "tx"; + }; + ssiu11: ssiu-9 { + dmas = <&audma0 0x4B>, <&audma1 0x4C>; + dma-names = "rx", "tx"; + }; + ssiu12: ssiu-10 { + dmas = <&audma0 0x57>, <&audma1 0x58>; + dma-names = "rx", "tx"; + }; + ssiu13: ssiu-11 { + dmas = <&audma0 0x59>, <&audma1 0x5A>; + dma-names = "rx", "tx"; + }; + ssiu14: ssiu-12 { + dmas = <&audma0 0x5F>, <&audma1 0x60>; + dma-names = "rx", "tx"; + }; + ssiu15: ssiu-13 { + dmas = <&audma0 0xC3>, <&audma1 0xC4>; + dma-names = "rx", "tx"; + }; + ssiu16: ssiu-14 { + dmas = <&audma0 0xC7>, <&audma1 0xC8>; + dma-names = "rx", "tx"; + }; + ssiu17: ssiu-15 { + dmas = <&audma0 0xCB>, <&audma1 0xCC>; + dma-names = "rx", "tx"; + }; + ssiu20: ssiu-16 { + dmas = <&audma0 0x63>, <&audma1 0x64>; + dma-names = "rx", "tx"; + }; + ssiu21: ssiu-17 { + dmas = <&audma0 0x67>, <&audma1 0x68>; + dma-names = "rx", "tx"; + }; + ssiu22: ssiu-18 { + dmas = <&audma0 0x6B>, <&audma1 0x6C>; + dma-names = "rx", "tx"; + }; + ssiu23: ssiu-19 { + dmas = <&audma0 0x6D>, <&audma1 0x6E>; + dma-names = "rx", "tx"; + }; + ssiu24: ssiu-20 { + dmas = <&audma0 0xCF>, <&audma1 0xCE>; + dma-names = "rx", "tx"; + }; + ssiu25: ssiu-21 { + dmas = <&audma0 0xEB>, <&audma1 0xEC>; + dma-names = "rx", "tx"; + }; + ssiu26: ssiu-22 { + dmas = <&audma0 0xED>, <&audma1 0xEE>; + dma-names = "rx", "tx"; + }; + ssiu27: ssiu-23 { + dmas = <&audma0 0xEF>, <&audma1 0xF0>; + dma-names = "rx", "tx"; + }; + ssiu30: ssiu-24 { + dmas = <&audma0 0x6f>, <&audma1 0x70>; + dma-names = "rx", "tx"; + }; + ssiu31: ssiu-25 { + dmas = <&audma0 0x21>, <&audma1 0x22>; + dma-names = "rx", "tx"; + }; + ssiu32: ssiu-26 { + dmas = <&audma0 0x23>, <&audma1 0x24>; + dma-names = "rx", "tx"; + }; + ssiu33: ssiu-27 { + dmas = <&audma0 0x25>, <&audma1 0x26>; + dma-names = "rx", "tx"; + }; + ssiu34: ssiu-28 { + dmas = <&audma0 0x27>, <&audma1 0x28>; + dma-names = "rx", "tx"; + }; + ssiu35: ssiu-29 { + dmas = <&audma0 0x29>, <&audma1 0x2A>; + dma-names = "rx", "tx"; + }; + ssiu36: ssiu-30 { + dmas = <&audma0 0x2B>, <&audma1 0x2C>; + dma-names = "rx", "tx"; + }; + ssiu37: ssiu-31 { + dmas = <&audma0 0x2D>, <&audma1 0x2E>; + dma-names = "rx", "tx"; + }; + ssiu40: ssiu-32 { + dmas = <&audma0 0x71>, <&audma1 0x72>; + dma-names = "rx", "tx"; + }; + ssiu41: ssiu-33 { + dmas = <&audma0 0x17>, <&audma1 0x18>; + dma-names = "rx", "tx"; + }; + ssiu42: ssiu-34 { + dmas = <&audma0 0x19>, <&audma1 0x1A>; + dma-names = "rx", "tx"; + }; + ssiu43: ssiu-35 { + dmas = <&audma0 0x1B>, <&audma1 0x1C>; + dma-names = "rx", "tx"; + }; + ssiu44: ssiu-36 { + dmas = <&audma0 0x1D>, <&audma1 0x1E>; + dma-names = "rx", "tx"; + }; + ssiu45: ssiu-37 { + dmas = <&audma0 0x1F>, <&audma1 0x20>; + dma-names = "rx", "tx"; + }; + ssiu46: ssiu-38 { + dmas = <&audma0 0x31>, <&audma1 0x32>; + dma-names = "rx", "tx"; + }; + ssiu47: ssiu-39 { + dmas = <&audma0 0x33>, <&audma1 0x34>; + dma-names = "rx", "tx"; + }; + ssiu50: ssiu-40 { + dmas = <&audma0 0x73>, <&audma1 0x74>; + dma-names = "rx", "tx"; + }; + ssiu60: ssiu-41 { + dmas = <&audma0 0x75>, <&audma1 0x76>; + dma-names = "rx", "tx"; + }; + ssiu70: ssiu-42 { + dmas = <&audma0 0x79>, <&audma1 0x7a>; + dma-names = "rx", "tx"; + }; + ssiu80: ssiu-43 { + dmas = <&audma0 0x7b>, <&audma1 0x7c>; + dma-names = "rx", "tx"; + }; + ssiu90: ssiu-44 { + dmas = <&audma0 0x7d>, <&audma1 0x7e>; + dma-names = "rx", "tx"; + }; + ssiu91: ssiu-45 { + dmas = <&audma0 0x7F>, <&audma1 0x80>; + dma-names = "rx", "tx"; + }; + ssiu92: ssiu-46 { + dmas = <&audma0 0x81>, <&audma1 0x82>; + dma-names = "rx", "tx"; + }; + ssiu93: ssiu-47 { + dmas = <&audma0 0x83>, <&audma1 0x84>; + dma-names = "rx", "tx"; + }; + ssiu94: ssiu-48 { + dmas = <&audma0 0xA3>, <&audma1 0xA4>; + dma-names = "rx", "tx"; + }; + ssiu95: ssiu-49 { + dmas = <&audma0 0xA5>, <&audma1 0xA6>; + dma-names = "rx", "tx"; + }; + ssiu96: ssiu-50 { + dmas = <&audma0 0xA7>, <&audma1 0xA8>; + dma-names = "rx", "tx"; + }; + ssiu97: ssiu-51 { + dmas = <&audma0 0xA9>, <&audma1 0xAA>; + dma-names = "rx", "tx"; }; }; }; @@ -2506,6 +2746,18 @@ thermal-sensors = <&tsc 2>; sustainable-power = <3874>; + cooling-maps { + map0 { + trip = <&target>; + cooling-device = <&a57_0 0 2>; + contribution = <1024>; + }; + map1 { + trip = <&target>; + cooling-device = <&a53_0 0 2>; + contribution = <1024>; + }; + }; trips { target: trip-point1 { temperature = <100000>; @@ -2519,18 +2771,6 @@ type = "critical"; }; }; - cooling-maps { - map0 { - trip = <&target>; - cooling-device = <&a57_0 0 2>; - contribution = <1024>; - }; - map1 { - trip = <&target>; - cooling-device = <&a53_0 0 2>; - contribution = <1024>; - }; - }; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts b/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts index 46a77eefa536..c99b1dec52ef 100644 --- a/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts +++ b/arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts @@ -65,6 +65,15 @@ reg = <0x0 0x48000000 0x0 0x78000000>; }; + reg_12p0v: regulator-12p0v { + compatible = "regulator-fixed"; + regulator-name = "D12.0V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-boot-on; + regulator-always-on; + }; + sound: sound { compatible = "simple-audio-card"; @@ -73,13 +82,13 @@ simple-audio-card,bitclock-master = <&sndcpu>; simple-audio-card,frame-master = <&sndcpu>; - sndcpu: simple-audio-card,cpu { - sound-dai = <&rcar_sound>; - }; - sndcodec: simple-audio-card,codec { sound-dai = <&tda19988>; }; + + sndcpu: simple-audio-card,cpu { + sound-dai = <&rcar_sound>; + }; }; vcc_sdhi0: regulator-vcc-sdhi0 { @@ -271,16 +280,16 @@ function = "du"; }; - i2c1_pins: i2c1 { - groups = "i2c1_b"; - function = "i2c1"; - }; - hscif2_pins: hscif2 { groups = "hscif2_data_a", "hscif2_ctrl_a"; function = "hscif2"; }; + i2c1_pins: i2c1 { + groups = "i2c1_b"; + function = "i2c1"; + }; + scif2_pins: scif2 { groups = "scif2_data_a"; function = "scif2"; @@ -304,16 +313,16 @@ power-source = <1800>; }; - sound_pins: sound { - groups = "ssi01239_ctrl", "ssi0_data"; - function = "ssi"; - }; - sound_clk_pins: sound_clk { groups = "audio_clkout1_a"; function = "audio_clk"; }; + sound_pins: sound { + groups = "ssi01239_ctrl", "ssi0_data"; + function = "ssi"; + }; + usb30_pins: usb30 { groups = "usb30", "usb30_id"; function = "usb30"; diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi index e7b5bf23f978..a1c2de90e470 100644 --- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi @@ -973,6 +973,8 @@ <&cpg CPG_CORE R8A774C0_CLK_CANFD>, <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A774C0_CLK_CANFD>; + assigned-clock-rates = <40000000>; power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; resets = <&cpg 916>; status = "disabled"; @@ -987,6 +989,8 @@ <&cpg CPG_CORE R8A774C0_CLK_CANFD>, <&can_clk>; clock-names = "clkp1", "clkp2", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A774C0_CLK_CANFD>; + assigned-clock-rates = <40000000>; power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; resets = <&cpg 915>; status = "disabled"; @@ -1367,6 +1371,17 @@ "ssi.1", "ssi.0"; status = "disabled"; + rcar_sound,ctu { + ctu00: ctu-0 { }; + ctu01: ctu-1 { }; + ctu02: ctu-2 { }; + ctu03: ctu-3 { }; + ctu10: ctu-4 { }; + ctu11: ctu-5 { }; + ctu12: ctu-6 { }; + ctu13: ctu-7 { }; + }; + rcar_sound,dvc { dvc0: dvc-0 { dmas = <&audma0 0xbc>; @@ -1383,17 +1398,6 @@ mix1: mix-1 { }; }; - rcar_sound,ctu { - ctu00: ctu-0 { }; - ctu01: ctu-1 { }; - ctu02: ctu-2 { }; - ctu03: ctu-3 { }; - ctu10: ctu-4 { }; - ctu11: ctu-5 { }; - ctu12: ctu-6 { }; - ctu13: ctu-7 { }; - }; - rcar_sound,src { src0: src-0 { interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; @@ -1702,13 +1706,24 @@ renesas,fcp = <&fcpvb0>; }; - fcpvb0: fcp@fe96f000 { - compatible = "renesas,fcpv"; - reg = <0 0xfe96f000 0 0x200>; - clocks = <&cpg CPG_MOD 607>; + vspd0: vsp@fea20000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea20000 0 0x7000>; + interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 623>; power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; - resets = <&cpg 607>; - iommus = <&ipmmu_vp0 5>; + resets = <&cpg 623>; + renesas,fcp = <&fcpvd0>; + }; + + vspd1: vsp@fea28000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea28000 0 0x7000>; + interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 622>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 622>; + renesas,fcp = <&fcpvd1>; }; vspi0: vsp@fe9a0000 { @@ -1721,23 +1736,13 @@ renesas,fcp = <&fcpvi0>; }; - fcpvi0: fcp@fe9af000 { + fcpvb0: fcp@fe96f000 { compatible = "renesas,fcpv"; - reg = <0 0xfe9af000 0 0x200>; - clocks = <&cpg CPG_MOD 611>; - power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; - resets = <&cpg 611>; - iommus = <&ipmmu_vp0 8>; - }; - - vspd0: vsp@fea20000 { - compatible = "renesas,vsp2"; - reg = <0 0xfea20000 0 0x7000>; - interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 623>; + reg = <0 0xfe96f000 0 0x200>; + clocks = <&cpg CPG_MOD 607>; power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; - resets = <&cpg 623>; - renesas,fcp = <&fcpvd0>; + resets = <&cpg 607>; + iommus = <&ipmmu_vp0 5>; }; fcpvd0: fcp@fea27000 { @@ -1749,16 +1754,6 @@ iommus = <&ipmmu_vi0 8>; }; - vspd1: vsp@fea28000 { - compatible = "renesas,vsp2"; - reg = <0 0xfea28000 0 0x7000>; - interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 622>; - power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; - resets = <&cpg 622>; - renesas,fcp = <&fcpvd1>; - }; - fcpvd1: fcp@fea2f000 { compatible = "renesas,fcpv"; reg = <0 0xfea2f000 0 0x200>; @@ -1768,6 +1763,15 @@ iommus = <&ipmmu_vi0 9>; }; + fcpvi0: fcp@fe9af000 { + compatible = "renesas,fcpv"; + reg = <0 0xfe9af000 0 0x200>; + clocks = <&cpg CPG_MOD 611>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + resets = <&cpg 611>; + iommus = <&ipmmu_vp0 8>; + }; + csi40: csi2@feaa0000 { compatible = "renesas,r8a774c0-csi2"; reg = <0 0xfeaa0000 0 0x10000>; @@ -1801,13 +1805,13 @@ du: display@feb00000 { compatible = "renesas,du-r8a774c0"; - reg = <0 0xfeb00000 0 0x80000>; + reg = <0 0xfeb00000 0 0x40000>; interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>; clock-names = "du.0", "du.1"; - vsps = <&vspd0 0 &vspd1 0>; + vsps = <&vspd0 0>, <&vspd1 0>; status = "disabled"; ports { @@ -1844,6 +1848,8 @@ resets = <&cpg 727>; status = "disabled"; + renesas,companion = <&lvds1>; + ports { #address-cells = <1>; #size-cells = <0>; @@ -1902,6 +1908,9 @@ polling-delay = <1000>; thermal-sensors = <&thermal>; + cooling-maps { + }; + trips { cpu-crit { temperature = <120000>; @@ -1909,9 +1918,6 @@ type = "critical"; }; }; - - cooling-maps { - }; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts index c1a56eab7b24..c72968623e94 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts @@ -52,12 +52,6 @@ status = "okay"; }; -&sound_card { - dais = <&rsnd_port0 /* ak4613 */ - &rsnd_port1 /* HDMI0 */ - &rsnd_port2>; /* HDMI1 */ -}; - &hdmi0 { status = "okay"; @@ -108,6 +102,13 @@ status = "okay"; }; +&pfc { + usb2_pins: usb2 { + groups = "usb2"; + function = "usb2"; + }; +}; + &rcar_sound { ports { /* rsnd_port0 is on salvator-common */ @@ -138,17 +139,16 @@ }; }; -&pfc { - usb2_pins: usb2 { - groups = "usb2"; - function = "usb2"; - }; -}; - &sata { status = "okay"; }; +&sound_card { + dais = <&rsnd_port0 /* ak4613 */ + &rsnd_port1 /* HDMI0 */ + &rsnd_port2>; /* HDMI1 */ +}; + &usb2_phy2 { pinctrl-0 = <&usb2_pins>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi index 40d10daca852..e4650ae5b75a 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi @@ -7,22 +7,75 @@ #include "r8a7795.dtsi" -&soc { - xhci1: usb@ee040000 { - compatible = "renesas,xhci-r8a7795", "renesas,rcar-gen3-xhci"; - reg = <0 0xee040000 0 0xc00>; - interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 327>; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 327>; - status = "disabled"; - }; +&audma0 { + iommus = <&ipmmu_mp1 0>, <&ipmmu_mp1 1>, + <&ipmmu_mp1 2>, <&ipmmu_mp1 3>, + <&ipmmu_mp1 4>, <&ipmmu_mp1 5>, + <&ipmmu_mp1 6>, <&ipmmu_mp1 7>, + <&ipmmu_mp1 8>, <&ipmmu_mp1 9>, + <&ipmmu_mp1 10>, <&ipmmu_mp1 11>, + <&ipmmu_mp1 12>, <&ipmmu_mp1 13>, + <&ipmmu_mp1 14>, <&ipmmu_mp1 15>; +}; - /delete-node/ mmu@febe0000; - /delete-node/ mmu@fe980000; - /delete-node/ mmu@fd950000; - /delete-node/ mmu@fd960000; - /delete-node/ mmu@fd970000; +&audma1 { + iommus = <&ipmmu_mp1 16>, <&ipmmu_mp1 17>, + <&ipmmu_mp1 18>, <&ipmmu_mp1 19>, + <&ipmmu_mp1 20>, <&ipmmu_mp1 21>, + <&ipmmu_mp1 22>, <&ipmmu_mp1 23>, + <&ipmmu_mp1 24>, <&ipmmu_mp1 25>, + <&ipmmu_mp1 26>, <&ipmmu_mp1 27>, + <&ipmmu_mp1 28>, <&ipmmu_mp1 29>, + <&ipmmu_mp1 30>, <&ipmmu_mp1 31>; +}; + +&du { + vsps = <&vspd0 &vspd1 &vspd2 &vspd3>; +}; + +&fcpvb1 { + iommus = <&ipmmu_vp0 7>; +}; + +&fcpf1 { + iommus = <&ipmmu_vp0 1>; +}; + +&fcpvi1 { + iommus = <&ipmmu_vp0 9>; +}; + +&fcpvd2 { + iommus = <&ipmmu_vi0 10>; +}; + +&gpio1 { + gpio-ranges = <&pfc 0 32 28>; +}; + +&ipmmu_vi0 { + renesas,ipmmu-main = <&ipmmu_mm 11>; +}; + +&ipmmu_vp0 { + renesas,ipmmu-main = <&ipmmu_mm 12>; +}; + +&ipmmu_vc0 { + renesas,ipmmu-main = <&ipmmu_mm 9>; +}; + +&ipmmu_vc1 { + renesas,ipmmu-main = <&ipmmu_mm 10>; +}; + +&ipmmu_rt { + renesas,ipmmu-main = <&ipmmu_mm 7>; +}; + +&soc { + /delete-node/ dma-controller@e6460000; + /delete-node/ dma-controller@e6470000; ipmmu_mp1: mmu@ec680000 { compatible = "renesas,ipmmu-r8a7795"; @@ -40,13 +93,37 @@ #iommu-cells = <1>; }; - /delete-node/ usb-phy@ee0e0200; - /delete-node/ usb@ee0e0100; - /delete-node/ usb@ee0e0000; + /delete-node/ mmu@fd950000; + /delete-node/ mmu@fd960000; + /delete-node/ mmu@fd970000; + /delete-node/ mmu@febe0000; + /delete-node/ mmu@fe980000; + + xhci1: usb@ee040000 { + compatible = "renesas,xhci-r8a7795", "renesas,rcar-gen3-xhci"; + reg = <0 0xee040000 0 0xc00>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 327>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 327>; + status = "disabled"; + }; + /delete-node/ usb@e659c000; + /delete-node/ usb@ee0e0000; + /delete-node/ usb@ee0e0100; - /delete-node/ dma-controller@e6460000; - /delete-node/ dma-controller@e6470000; + /delete-node/ usb-phy@ee0e0200; + + fdp1@fe948000 { + compatible = "renesas,fdp1"; + reg = <0 0xfe948000 0 0x2400>; + interrupts = <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 117>; + power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 117>; + renesas,fcp = <&fcpf2>; + }; fcpf2: fcp@fe952000 { compatible = "renesas,fcpf"; @@ -57,15 +134,13 @@ iommus = <&ipmmu_vp0 2>; }; - vspi2: vsp@fe9c0000 { - compatible = "renesas,vsp2"; - reg = <0 0xfe9c0000 0 0x8000>; - interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 629>; - power-domains = <&sysc R8A7795_PD_A3VP>; - resets = <&cpg 629>; - - renesas,fcp = <&fcpvi2>; + fcpvd3: fcp@fea3f000 { + compatible = "renesas,fcpv"; + reg = <0 0xfea3f000 0 0x200>; + clocks = <&cpg CPG_MOD 600>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 600>; + iommus = <&ipmmu_vi0 11>; }; fcpvi2: fcp@fe9cf000 { @@ -88,23 +163,15 @@ renesas,fcp = <&fcpvd3>; }; - fcpvd3: fcp@fea3f000 { - compatible = "renesas,fcpv"; - reg = <0 0xfea3f000 0 0x200>; - clocks = <&cpg CPG_MOD 600>; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 600>; - iommus = <&ipmmu_vi0 11>; - }; - - fdp1@fe948000 { - compatible = "renesas,fdp1"; - reg = <0 0xfe948000 0 0x2400>; - interrupts = <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 117>; + vspi2: vsp@fe9c0000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe9c0000 0 0x8000>; + interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 629>; power-domains = <&sysc R8A7795_PD_A3VP>; - resets = <&cpg 117>; - renesas,fcp = <&fcpf2>; + resets = <&cpg 629>; + + renesas,fcp = <&fcpvi2>; }; csi21: csi2@fea90000 { @@ -163,72 +230,6 @@ }; }; -&gpio1 { - gpio-ranges = <&pfc 0 32 28>; -}; - -&ipmmu_vi0 { - renesas,ipmmu-main = <&ipmmu_mm 11>; -}; - -&ipmmu_vp0 { - renesas,ipmmu-main = <&ipmmu_mm 12>; -}; - -&ipmmu_vc0 { - renesas,ipmmu-main = <&ipmmu_mm 9>; -}; - -&ipmmu_vc1 { - renesas,ipmmu-main = <&ipmmu_mm 10>; -}; - -&ipmmu_rt { - renesas,ipmmu-main = <&ipmmu_mm 7>; -}; - -&audma0 { - iommus = <&ipmmu_mp1 0>, <&ipmmu_mp1 1>, - <&ipmmu_mp1 2>, <&ipmmu_mp1 3>, - <&ipmmu_mp1 4>, <&ipmmu_mp1 5>, - <&ipmmu_mp1 6>, <&ipmmu_mp1 7>, - <&ipmmu_mp1 8>, <&ipmmu_mp1 9>, - <&ipmmu_mp1 10>, <&ipmmu_mp1 11>, - <&ipmmu_mp1 12>, <&ipmmu_mp1 13>, - <&ipmmu_mp1 14>, <&ipmmu_mp1 15>; -}; - -&audma1 { - iommus = <&ipmmu_mp1 16>, <&ipmmu_mp1 17>, - <&ipmmu_mp1 18>, <&ipmmu_mp1 19>, - <&ipmmu_mp1 20>, <&ipmmu_mp1 21>, - <&ipmmu_mp1 22>, <&ipmmu_mp1 23>, - <&ipmmu_mp1 24>, <&ipmmu_mp1 25>, - <&ipmmu_mp1 26>, <&ipmmu_mp1 27>, - <&ipmmu_mp1 28>, <&ipmmu_mp1 29>, - <&ipmmu_mp1 30>, <&ipmmu_mp1 31>; -}; - -&fcpvb1 { - iommus = <&ipmmu_vp0 7>; -}; - -&fcpf1 { - iommus = <&ipmmu_vp0 1>; -}; - -&fcpvi1 { - iommus = <&ipmmu_vp0 9>; -}; - -&fcpvd2 { - iommus = <&ipmmu_vi0 10>; -}; - -&du { - vsps = <&vspd0 &vspd1 &vspd2 &vspd3>; -}; - &vin0 { ports { port@1 { diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts index d2d48b33b37f..72874f675359 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts @@ -52,12 +52,6 @@ status = "okay"; }; -&sound_card { - dais = <&rsnd_port0 /* ak4613 */ - &rsnd_port1 /* HDMI0 */ - &rsnd_port2>; /* HDMI1 */ -}; - &hdmi0 { status = "okay"; @@ -108,6 +102,13 @@ status = "okay"; }; +&pfc { + usb2_pins: usb2 { + groups = "usb2"; + function = "usb2"; + }; +}; + &rcar_sound { ports { /* rsnd_port0 is on salvator-common */ @@ -138,17 +139,16 @@ }; }; -&pfc { - usb2_pins: usb2 { - groups = "usb2"; - function = "usb2"; - }; -}; - &sata { status = "okay"; }; +&sound_card { + dais = <&rsnd_port0 /* ak4613 */ + &rsnd_port1 /* HDMI0 */ + &rsnd_port2>; /* HDMI1 */ +}; + &usb2_phy2 { pinctrl-0 = <&usb2_pins>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts index 42101fc76837..36667c81d43d 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts @@ -57,17 +57,6 @@ status = "okay"; }; -&hsusb3 { - dr_mode = "otg"; - status = "okay"; -}; - -&sound_card { - dais = <&rsnd_port0 /* ak4613 */ - &rsnd_port1 /* HDMI0 */ - &rsnd_port2>; /* HDMI1 */ -}; - &hdmi0 { status = "okay"; @@ -114,6 +103,11 @@ remote-endpoint = <&rcar_dw_hdmi1_out>; }; +&hsusb3 { + dr_mode = "otg"; + status = "okay"; +}; + &ohci2 { status = "okay"; }; @@ -123,36 +117,6 @@ status = "okay"; }; -&rcar_sound { - ports { - /* rsnd_port0 is on salvator-common */ - rsnd_port1: port@1 { - reg = <1>; - rsnd_endpoint1: endpoint { - remote-endpoint = <&dw_hdmi0_snd_in>; - - dai-format = "i2s"; - bitclock-master = <&rsnd_endpoint1>; - frame-master = <&rsnd_endpoint1>; - - playback = <&ssi2>; - }; - }; - rsnd_port2: port@2 { - reg = <2>; - rsnd_endpoint2: endpoint { - remote-endpoint = <&dw_hdmi1_snd_in>; - - dai-format = "i2s"; - bitclock-master = <&rsnd_endpoint2>; - frame-master = <&rsnd_endpoint2>; - - playback = <&ssi3>; - }; - }; - }; -}; - &pca9654 { pcie_sata_switch { gpio-hog; @@ -186,11 +150,47 @@ }; }; +&rcar_sound { + ports { + /* rsnd_port0 is on salvator-common */ + rsnd_port1: port@1 { + reg = <1>; + rsnd_endpoint1: endpoint { + remote-endpoint = <&dw_hdmi0_snd_in>; + + dai-format = "i2s"; + bitclock-master = <&rsnd_endpoint1>; + frame-master = <&rsnd_endpoint1>; + + playback = <&ssi2>; + }; + }; + rsnd_port2: port@2 { + reg = <2>; + rsnd_endpoint2: endpoint { + remote-endpoint = <&dw_hdmi1_snd_in>; + + dai-format = "i2s"; + bitclock-master = <&rsnd_endpoint2>; + frame-master = <&rsnd_endpoint2>; + + playback = <&ssi3>; + }; + }; + }; +}; + /* SW12-7 must be set 'Off' (MD12 set to 1) which is not the default! */ &sata { status = "okay"; }; +&sound_card { + dais = <&rsnd_port0 /* ak4613 */ + &rsnd_port1 /* HDMI0 */ + &rsnd_port2>; /* HDMI1 */ +}; + &usb2_phy2 { pinctrl-0 = <&usb2_pins>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi index 1745ac4b307e..95deff66eeb6 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi @@ -2731,6 +2731,83 @@ resets = <&cpg 820>; }; + vspbc: vsp@fe920000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe920000 0 0x8000>; + interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 624>; + power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 624>; + + renesas,fcp = <&fcpvb1>; + }; + + vspbd: vsp@fe960000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe960000 0 0x8000>; + interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 626>; + power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 626>; + + renesas,fcp = <&fcpvb0>; + }; + + vspd0: vsp@fea20000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea20000 0 0x5000>; + interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 623>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 623>; + + renesas,fcp = <&fcpvd0>; + }; + + vspd1: vsp@fea28000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea28000 0 0x5000>; + interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 622>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 622>; + + renesas,fcp = <&fcpvd1>; + }; + + vspd2: vsp@fea30000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea30000 0 0x5000>; + interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 621>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 621>; + + renesas,fcp = <&fcpvd2>; + }; + + vspi0: vsp@fe9a0000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe9a0000 0 0x8000>; + interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 631>; + power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 631>; + + renesas,fcp = <&fcpvi0>; + }; + + vspi1: vsp@fe9b0000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe9b0000 0 0x8000>; + interrupts = <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 630>; + power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 630>; + + renesas,fcp = <&fcpvi1>; + }; + fdp1@fe940000 { compatible = "renesas,fdp1"; reg = <0 0xfe940000 0 0x2400>; @@ -2832,83 +2909,6 @@ iommus = <&ipmmu_vi1 10>; }; - vspbd: vsp@fe960000 { - compatible = "renesas,vsp2"; - reg = <0 0xfe960000 0 0x8000>; - interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 626>; - power-domains = <&sysc R8A7795_PD_A3VP>; - resets = <&cpg 626>; - - renesas,fcp = <&fcpvb0>; - }; - - vspbc: vsp@fe920000 { - compatible = "renesas,vsp2"; - reg = <0 0xfe920000 0 0x8000>; - interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 624>; - power-domains = <&sysc R8A7795_PD_A3VP>; - resets = <&cpg 624>; - - renesas,fcp = <&fcpvb1>; - }; - - vspd0: vsp@fea20000 { - compatible = "renesas,vsp2"; - reg = <0 0xfea20000 0 0x5000>; - interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 623>; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 623>; - - renesas,fcp = <&fcpvd0>; - }; - - vspd1: vsp@fea28000 { - compatible = "renesas,vsp2"; - reg = <0 0xfea28000 0 0x5000>; - interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 622>; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 622>; - - renesas,fcp = <&fcpvd1>; - }; - - vspd2: vsp@fea30000 { - compatible = "renesas,vsp2"; - reg = <0 0xfea30000 0 0x5000>; - interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 621>; - power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - resets = <&cpg 621>; - - renesas,fcp = <&fcpvd2>; - }; - - vspi0: vsp@fe9a0000 { - compatible = "renesas,vsp2"; - reg = <0 0xfe9a0000 0 0x8000>; - interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 631>; - power-domains = <&sysc R8A7795_PD_A3VP>; - resets = <&cpg 631>; - - renesas,fcp = <&fcpvi0>; - }; - - vspi1: vsp@fe9b0000 { - compatible = "renesas,vsp2"; - reg = <0 0xfe9b0000 0 0x8000>; - interrupts = <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 630>; - power-domains = <&sysc R8A7795_PD_A3VP>; - resets = <&cpg 630>; - - renesas,fcp = <&fcpvi1>; - }; - csi20: csi2@fea80000 { compatible = "renesas,r8a7795-csi2"; reg = <0 0xfea80000 0 0x10000>; @@ -3112,7 +3112,7 @@ <&cpg CPG_MOD 722>, <&cpg CPG_MOD 721>; clock-names = "du.0", "du.1", "du.2", "du.3"; - vsps = <&vspd0 0 &vspd1 0 &vspd2 0 &vspd0 1>; + vsps = <&vspd0 0>, <&vspd1 0>, <&vspd2 0>, <&vspd0 1>; status = "disabled"; ports { diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts index 2aefa53cb16b..de37e91e3b7a 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts @@ -36,11 +36,6 @@ "dclkin.0", "dclkin.1", "dclkin.2"; }; -&sound_card { - dais = <&rsnd_port0 /* ak4613 */ - &rsnd_port1>; /* HDMI0 */ -}; - &hdmi0 { status = "okay"; @@ -81,3 +76,8 @@ }; }; }; + +&sound_card { + dais = <&rsnd_port0 /* ak4613 */ + &rsnd_port1>; /* HDMI0 */ +}; diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts index d58ede18108d..a1cbfef2053f 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts +++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts @@ -36,11 +36,6 @@ "dclkin.0", "dclkin.1", "dclkin.2"; }; -&sound_card { - dais = <&rsnd_port0 /* ak4613 */ - &rsnd_port1>; /* HDMI0 */ -}; - &hdmi0 { status = "okay"; @@ -81,3 +76,8 @@ }; }; }; + +&sound_card { + dais = <&rsnd_port0 /* ak4613 */ + &rsnd_port1>; /* HDMI0 */ +}; diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi index 26df5b88efd7..3dc9d73f589a 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi @@ -1833,6 +1833,17 @@ "ssi.1", "ssi.0"; status = "disabled"; + rcar_sound,ctu { + ctu00: ctu-0 { }; + ctu01: ctu-1 { }; + ctu02: ctu-2 { }; + ctu03: ctu-3 { }; + ctu10: ctu-4 { }; + ctu11: ctu-5 { }; + ctu12: ctu-6 { }; + ctu13: ctu-7 { }; + }; + rcar_sound,dvc { dvc0: dvc-0 { dmas = <&audma1 0xbc>; @@ -1849,17 +1860,6 @@ mix1: mix-1 { }; }; - rcar_sound,ctu { - ctu00: ctu-0 { }; - ctu01: ctu-1 { }; - ctu02: ctu-2 { }; - ctu03: ctu-3 { }; - ctu10: ctu-4 { }; - ctu11: ctu-5 { }; - ctu12: ctu-6 { }; - ctu13: ctu-7 { }; - }; - rcar_sound,src { src0: src-0 { interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; @@ -1913,6 +1913,59 @@ }; }; + rcar_sound,ssi { + ssi0: ssi-0 { + interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x01>, <&audma1 0x02>; + dma-names = "rx", "tx"; + }; + ssi1: ssi-1 { + interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x03>, <&audma1 0x04>; + dma-names = "rx", "tx"; + }; + ssi2: ssi-2 { + interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x05>, <&audma1 0x06>; + dma-names = "rx", "tx"; + }; + ssi3: ssi-3 { + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x07>, <&audma1 0x08>; + dma-names = "rx", "tx"; + }; + ssi4: ssi-4 { + interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x09>, <&audma1 0x0a>; + dma-names = "rx", "tx"; + }; + ssi5: ssi-5 { + interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0b>, <&audma1 0x0c>; + dma-names = "rx", "tx"; + }; + ssi6: ssi-6 { + interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0d>, <&audma1 0x0e>; + dma-names = "rx", "tx"; + }; + ssi7: ssi-7 { + interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x0f>, <&audma1 0x10>; + dma-names = "rx", "tx"; + }; + ssi8: ssi-8 { + interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x11>, <&audma1 0x12>; + dma-names = "rx", "tx"; + }; + ssi9: ssi-9 { + interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&audma0 0x13>, <&audma1 0x14>; + dma-names = "rx", "tx"; + }; + }; + rcar_sound,ssiu { ssiu00: ssiu-0 { dmas = <&audma0 0x15>, <&audma1 0x16>; @@ -2123,59 +2176,6 @@ dma-names = "rx", "tx"; }; }; - - rcar_sound,ssi { - ssi0: ssi-0 { - interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x01>, <&audma1 0x02>; - dma-names = "rx", "tx"; - }; - ssi1: ssi-1 { - interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x03>, <&audma1 0x04>; - dma-names = "rx", "tx"; - }; - ssi2: ssi-2 { - interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x05>, <&audma1 0x06>; - dma-names = "rx", "tx"; - }; - ssi3: ssi-3 { - interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x07>, <&audma1 0x08>; - dma-names = "rx", "tx"; - }; - ssi4: ssi-4 { - interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x09>, <&audma1 0x0a>; - dma-names = "rx", "tx"; - }; - ssi5: ssi-5 { - interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x0b>, <&audma1 0x0c>; - dma-names = "rx", "tx"; - }; - ssi6: ssi-6 { - interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x0d>, <&audma1 0x0e>; - dma-names = "rx", "tx"; - }; - ssi7: ssi-7 { - interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x0f>, <&audma1 0x10>; - dma-names = "rx", "tx"; - }; - ssi8: ssi-8 { - interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x11>, <&audma1 0x12>; - dma-names = "rx", "tx"; - }; - ssi9: ssi-9 { - interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; - dmas = <&audma0 0x13>, <&audma1 0x14>; - dma-names = "rx", "tx"; - }; - }; }; audma0: dma-controller@ec700000 { @@ -2860,6 +2860,18 @@ thermal-sensors = <&tsc 2>; sustainable-power = <3874>; + cooling-maps { + map0 { + trip = <&target>; + cooling-device = <&a57_0 2 4>; + contribution = <1024>; + }; + map1 { + trip = <&target>; + cooling-device = <&a53_0 0 2>; + contribution = <1024>; + }; + }; trips { target: trip-point1 { temperature = <100000>; @@ -2873,18 +2885,6 @@ type = "critical"; }; }; - cooling-maps { - map0 { - trip = <&target>; - cooling-device = <&a57_0 2 4>; - contribution = <1024>; - }; - map1 { - trip = <&target>; - cooling-device = <&a53_0 0 2>; - contribution = <1024>; - }; - }; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dts index 340a3c72b65a..660a0240eec5 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a77965-salvator-x.dts @@ -41,9 +41,37 @@ remote-endpoint = <&hdmi0_con>; }; }; + port@2 { + reg = <2>; + dw_hdmi0_snd_in: endpoint { + remote-endpoint = <&rsnd_endpoint1>; + }; + }; }; }; &hdmi0_con { remote-endpoint = <&rcar_dw_hdmi0_out>; }; + +&rcar_sound { + ports { + rsnd_port1: port@1 { + reg = <1>; + rsnd_endpoint1: endpoint { + remote-endpoint = <&dw_hdmi0_snd_in>; + + dai-format = "i2s"; + bitclock-master = <&rsnd_endpoint1>; + frame-master = <&rsnd_endpoint1>; + + playback = <&ssi2>; + }; + }; + }; +}; + +&sound_card { + dais = <&rsnd_port0 /* ak4613 */ + &rsnd_port1>; /* HDMI0 */ +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts index f03a5e9e0c42..5cef64605464 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts +++ b/arch/arm64/boot/dts/renesas/r8a77965-salvator-xs.dts @@ -41,6 +41,12 @@ remote-endpoint = <&hdmi0_con>; }; }; + port@2 { + reg = <2>; + dw_hdmi0_snd_in: endpoint { + remote-endpoint = <&rsnd_endpoint1>; + }; + }; }; }; @@ -57,7 +63,29 @@ }; }; +&rcar_sound { + ports { + rsnd_port1: port@1 { + reg = <1>; + rsnd_endpoint1: endpoint { + remote-endpoint = <&dw_hdmi0_snd_in>; + + dai-format = "i2s"; + bitclock-master = <&rsnd_endpoint1>; + frame-master = <&rsnd_endpoint1>; + + playback = <&ssi2>; + }; + }; + }; +}; + /* SW12-7 must be set 'Off' (MD12 set to 1) which is not the default! */ &sata { status = "okay"; }; + +&sound_card { + dais = <&rsnd_port0 /* ak4613 */ + &rsnd_port1>; /* HDMI0 */ +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi index 131f895ab778..4ae163220f60 100644 --- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi @@ -2255,14 +2255,6 @@ renesas,fcp = <&fcpvb0>; }; - fcpvb0: fcp@fe96f000 { - compatible = "renesas,fcpv"; - reg = <0 0xfe96f000 0 0x200>; - clocks = <&cpg CPG_MOD 607>; - power-domains = <&sysc R8A77965_PD_A3VP>; - resets = <&cpg 607>; - }; - vspi0: vsp@fe9a0000 { compatible = "renesas,vsp2"; reg = <0 0xfe9a0000 0 0x8000>; @@ -2274,14 +2266,6 @@ renesas,fcp = <&fcpvi0>; }; - fcpvi0: fcp@fe9af000 { - compatible = "renesas,fcpv"; - reg = <0 0xfe9af000 0 0x200>; - clocks = <&cpg CPG_MOD 611>; - power-domains = <&sysc R8A77965_PD_A3VP>; - resets = <&cpg 611>; - }; - vspd0: vsp@fea20000 { compatible = "renesas,vsp2"; reg = <0 0xfea20000 0 0x5000>; @@ -2293,14 +2277,6 @@ renesas,fcp = <&fcpvd0>; }; - fcpvd0: fcp@fea27000 { - compatible = "renesas,fcpv"; - reg = <0 0xfea27000 0 0x200>; - clocks = <&cpg CPG_MOD 603>; - power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; - resets = <&cpg 603>; - }; - vspd1: vsp@fea28000 { compatible = "renesas,vsp2"; reg = <0 0xfea28000 0 0x5000>; @@ -2312,6 +2288,22 @@ renesas,fcp = <&fcpvd1>; }; + fcpvb0: fcp@fe96f000 { + compatible = "renesas,fcpv"; + reg = <0 0xfe96f000 0 0x200>; + clocks = <&cpg CPG_MOD 607>; + power-domains = <&sysc R8A77965_PD_A3VP>; + resets = <&cpg 607>; + }; + + fcpvd0: fcp@fea27000 { + compatible = "renesas,fcpv"; + reg = <0 0xfea27000 0 0x200>; + clocks = <&cpg CPG_MOD 603>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 603>; + }; + fcpvd1: fcp@fea2f000 { compatible = "renesas,fcpv"; reg = <0 0xfea2f000 0 0x200>; @@ -2320,6 +2312,14 @@ resets = <&cpg 602>; }; + fcpvi0: fcp@fe9af000 { + compatible = "renesas,fcpv"; + reg = <0 0xfe9af000 0 0x200>; + clocks = <&cpg CPG_MOD 611>; + power-domains = <&sysc R8A77965_PD_A3VP>; + resets = <&cpg 611>; + }; + csi20: csi2@fea80000 { compatible = "renesas,r8a77965-csi2"; reg = <0 0xfea80000 0 0x10000>; @@ -2469,7 +2469,7 @@ clock-names = "du.0", "du.1", "du.3"; status = "disabled"; - vsps = <&vspd0 0 &vspd1 0 &vspd0 1>; + vsps = <&vspd0 0>, <&vspd1 0>, <&vspd0 1>; ports { #address-cells = <1>; diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts index 233f26fbec17..2afb91ec9c8d 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts +++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts @@ -23,10 +23,13 @@ stdout-path = "serial0:115200n8"; }; - memory@48000000 { - device_type = "memory"; - /* first 128MB is reserved for secure area. */ - reg = <0x0 0x48000000 0x0 0x38000000>; + d3p3: regulator-fixed { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; }; hdmi-out { @@ -40,15 +43,6 @@ }; }; - d3p3: regulator-fixed { - compatible = "regulator-fixed"; - regulator-name = "fixed-3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - lvds-decoder { compatible = "thine,thc63lvd1024"; @@ -73,6 +67,12 @@ }; }; }; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x38000000>; + }; }; &avb { @@ -102,6 +102,10 @@ }; }; +&du { + status = "okay"; +}; + &extal_clk { clock-frequency = <16666666>; }; @@ -157,6 +161,18 @@ }; }; +&lvds0 { + status = "okay"; + + ports { + port@1 { + lvds0_out: endpoint { + remote-endpoint = <&thc63lvd1024_in>; + }; + }; + }; +}; + &pfc { avb_pins: avb0 { groups = "avb0_mdio", "avb0_rgmii", "avb0_txcrefclk"; @@ -190,19 +206,3 @@ status = "okay"; }; - -&du { - status = "okay"; -}; - -&lvds0 { - status = "okay"; - - ports { - port@1 { - lvds0_out: endpoint { - remote-endpoint = <&thc63lvd1024_in>; - }; - }; - }; -}; diff --git a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts index 15cc9fed2e16..d7c7b9156e08 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts +++ b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts @@ -21,6 +21,41 @@ stdout-path = "serial0:115200n8"; }; + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&adv7511_out>; + }; + }; + }; + + lvds-decoder { + compatible = "thine,thc63lvd1024"; + vcc-supply = <&vcc_d3_3v>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + thc63lvd1024_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + + port@2 { + reg = <2>; + thc63lvd1024_out: endpoint { + remote-endpoint = <&adv7511_in>; + }; + }; + }; + }; + memory@48000000 { device_type = "memory"; /* first 128MB is reserved for secure area. */ @@ -59,41 +94,6 @@ regulator-boot-on; regulator-always-on; }; - - lvds-decoder { - compatible = "thine,thc63lvd1024"; - vcc-supply = <&vcc_d3_3v>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - thc63lvd1024_in: endpoint { - remote-endpoint = <&lvds0_out>; - }; - }; - - port@2 { - reg = <2>; - thc63lvd1024_out: endpoint { - remote-endpoint = <&adv7511_in>; - }; - }; - }; - }; - - hdmi-out { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con: endpoint { - remote-endpoint = <&adv7511_out>; - }; - }; - }; }; &avb { @@ -128,29 +128,6 @@ clock-frequency = <32768>; }; -&pfc { - avb_pins: avb0 { - groups = "avb0_mdio", "avb0_rgmii", "avb0_txcrefclk"; - function = "avb0"; - }; - - i2c0_pins: i2c0 { - groups = "i2c0"; - function = "i2c0"; - }; - - mmc_pins: mmc_3_3v { - groups = "mmc_data8", "mmc_ctrl"; - function = "mmc"; - power-source = <3300>; - }; - - scif0_pins: scif0 { - groups = "scif0_data"; - function = "scif0"; - }; -}; - &i2c0 { pinctrl-0 = <&i2c0_pins>; pinctrl-names = "default"; @@ -220,6 +197,29 @@ status = "okay"; }; +&pfc { + avb_pins: avb0 { + groups = "avb0_mdio", "avb0_rgmii", "avb0_txcrefclk"; + function = "avb0"; + }; + + i2c0_pins: i2c0 { + groups = "i2c0"; + function = "i2c0"; + }; + + mmc_pins: mmc_3_3v { + groups = "mmc_data8", "mmc_ctrl"; + function = "mmc"; + power-source = <3300>; + }; + + scif0_pins: scif0 { + groups = "scif0_data"; + function = "scif0"; + }; +}; + &scif0 { pinctrl-0 = <&scif0_pins>; pinctrl-names = "default"; diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi index 5b6164d4b8e3..0cd3b376635d 100644 --- a/arch/arm64/boot/dts/renesas/r8a77970.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi @@ -1181,6 +1181,9 @@ polling-delay = <1000>; thermal-sensors = <&thermal>; + cooling-maps { + }; + trips { cpu-crit { temperature = <120000>; @@ -1188,9 +1191,6 @@ type = "critical"; }; }; - - cooling-maps { - }; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts index 5a7012be0d6a..3dde028e22a6 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts +++ b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts @@ -22,35 +22,20 @@ stdout-path = "serial0:115200n8"; }; - memory@48000000 { - device_type = "memory"; - /* first 128MB is reserved for secure area. */ - reg = <0 0x48000000 0 0x78000000>; - }; - - d3_3v: regulator-0 { - compatible = "regulator-fixed"; - regulator-name = "D3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - vddq_vin01: regulator-1 { + d1_8v: regulator-2 { compatible = "regulator-fixed"; - regulator-name = "VDDQ_VIN01"; + regulator-name = "D1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-boot-on; regulator-always-on; }; - d1_8v: regulator-2 { + d3_3v: regulator-0 { compatible = "regulator-fixed"; - regulator-name = "D1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + regulator-name = "D3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; }; @@ -90,6 +75,21 @@ }; }; + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0 0x48000000 0 0x78000000>; + }; + + vddq_vin01: regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "VDDQ_VIN01"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + x1_clk: x1-clock { compatible = "fixed-clock"; #clock-cells = <0>; diff --git a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts index dd14a41b32cd..adbfd8f07d06 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts +++ b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts @@ -22,12 +22,6 @@ stdout-path = "serial0:115200n8"; }; - memory@48000000 { - device_type = "memory"; - /* first 128MB is reserved for secure area. */ - reg = <0 0x48000000 0 0x78000000>; - }; - hdmi-out { compatible = "hdmi-connector"; type = "a"; @@ -63,6 +57,12 @@ }; }; + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0 0x48000000 0 0x78000000>; + }; + osc1_clk: osc1-clock { compatible = "fixed-clock"; #clock-cells = <0>; diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi index a901a341dcf7..461a47ea656d 100644 --- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi @@ -1299,9 +1299,9 @@ #iommu-cells = <1>; }; - ipmmu_vc0: mmu@fe6b0000 { + ipmmu_vc0: mmu@fe990000 { compatible = "renesas,ipmmu-r8a77980"; - reg = <0 0xfe6b0000 0 0x1000>; + reg = <0 0xfe990000 0 0x1000>; renesas,ipmmu-main = <&ipmmu_mm 12>; power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; #iommu-cells = <1>; diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts index 83fc13ac3fa1..b38f9d442fc0 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts +++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts @@ -23,12 +23,6 @@ stdout-path = "serial0:115200n8"; }; - memory@48000000 { - device_type = "memory"; - /* first 128MB is reserved for secure area. */ - reg = <0x0 0x48000000 0x0 0x38000000>; - }; - audio_clkout: audio-clkout { /* * This is same as <&rcar_sound 0> @@ -107,36 +101,10 @@ }; }; - vga { - compatible = "vga-connector"; - - port { - vga_in: endpoint { - remote-endpoint = <&adv7123_out>; - }; - }; - }; - - vga-encoder { - compatible = "adi,adv7123"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - adv7123_in: endpoint { - remote-endpoint = <&du_out_rgb>; - }; - }; - port@1 { - reg = <1>; - adv7123_out: endpoint { - remote-endpoint = <&vga_in>; - }; - }; - }; + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x38000000>; }; reg_1p8v: regulator0 { @@ -157,15 +125,13 @@ regulator-always-on; }; - vbus0_usb2: regulator-vbus0-usb2 { + reg_12p0v: regulator2 { compatible = "regulator-fixed"; - - regulator-name = "USB20_VBUS_CN"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - - gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>; - enable-active-high; + regulator-name = "D12.0V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-boot-on; + regulator-always-on; }; rsnd_ak4613: sound { @@ -176,34 +142,24 @@ simple-audio-card,bitclock-master = <&sndcpu>; simple-audio-card,frame-master = <&sndcpu>; - sndcpu: simple-audio-card,cpu { - sound-dai = <&rcar_sound>; - }; - sndcodec: simple-audio-card,codec { sound-dai = <&ak4613>; }; - }; - x12_clk: x12 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24576000>; + sndcpu: simple-audio-card,cpu { + sound-dai = <&rcar_sound>; + }; }; - reg_12p0v: regulator2 { + vbus0_usb2: regulator-vbus0-usb2 { compatible = "regulator-fixed"; - regulator-name = "D12.0V"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - regulator-boot-on; - regulator-always-on; - }; - x13_clk: x13 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <74250000>; + regulator-name = "USB20_VBUS_CN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>; + enable-active-high; }; vcc_sdhi0: regulator-vcc-sdhi0 { @@ -253,6 +209,50 @@ states = <3300000 1 1800000 0>; }; + + vga { + compatible = "vga-connector"; + + port { + vga_in: endpoint { + remote-endpoint = <&adv7123_out>; + }; + }; + }; + + vga-encoder { + compatible = "adi,adv7123"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7123_in: endpoint { + remote-endpoint = <&du_out_rgb>; + }; + }; + port@1 { + reg = <1>; + adv7123_out: endpoint { + remote-endpoint = <&vga_in>; + }; + }; + }; + }; + + x12_clk: x12 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + + x13_clk: x13 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <74250000>; + }; }; &audio_clk_a { @@ -271,6 +271,14 @@ interrupt-parent = <&gpio2>; interrupts = <21 IRQ_TYPE_LEVEL_LOW>; reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; + /* + * TX clock internal delay mode is required for reliable + * 1Gbps communication using the KSZ9031RNX phy present on + * the Ebisu board, however, TX clock internal delay mode + * isn't supported on r8a77990. Thus, limit speed to + * 100Mbps for reliable communication. + */ + max-speed = <100>; }; }; @@ -547,6 +555,11 @@ function = "pwm5"; }; + scif2_pins: scif2 { + groups = "scif2_data_a"; + function = "scif2"; + }; + sdhi0_pins: sd0 { groups = "sdhi0_data4", "sdhi0_ctrl"; function = "sdhi0"; @@ -577,20 +590,15 @@ power-source = <1800>; }; - sound_pins: sound { - groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data"; - function = "ssi"; - }; - sound_clk_pins: sound_clk { groups = "audio_clk_a", "audio_clk_b_a", "audio_clk_c_a", "audio_clkout_a", "audio_clkout1_a"; function = "audio_clk"; }; - scif2_pins: scif2 { - groups = "scif2_data_a"; - function = "scif2"; + sound_pins: sound { + groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data"; + function = "ssi"; }; usb0_pins: usb { @@ -671,38 +679,6 @@ status = "okay"; }; -&ssi1 { - shared-pin; -}; - -&usb2_phy0 { - pinctrl-0 = <&usb0_pins>; - pinctrl-names = "default"; - - vbus-supply = <&vbus0_usb2>; - status = "okay"; -}; - -&usb3_peri0 { - companion = <&xhci0>; - status = "okay"; -}; - -&vin4 { - status = "okay"; -}; - -&vin5 { - status = "okay"; -}; - -&xhci0 { - pinctrl-0 = <&usb30_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - &sdhi0 { pinctrl-0 = <&sdhi0_pins>; pinctrl-1 = <&sdhi0_pins_uhs>; @@ -746,3 +722,35 @@ non-removable; status = "okay"; }; + +&ssi1 { + shared-pin; +}; + +&usb2_phy0 { + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; + + vbus-supply = <&vbus0_usb2>; + status = "okay"; +}; + +&usb3_peri0 { + companion = <&xhci0>; + status = "okay"; +}; + +&vin4 { + status = "okay"; +}; + +&vin5 { + status = "okay"; +}; + +&xhci0 { + pinctrl-0 = <&usb30_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi index b4318661f35e..455954c3d98e 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi @@ -1326,6 +1326,17 @@ "ssi.1", "ssi.0"; status = "disabled"; + rcar_sound,ctu { + ctu00: ctu-0 { }; + ctu01: ctu-1 { }; + ctu02: ctu-2 { }; + ctu03: ctu-3 { }; + ctu10: ctu-4 { }; + ctu11: ctu-5 { }; + ctu12: ctu-6 { }; + ctu13: ctu-7 { }; + }; + rcar_sound,dvc { dvc0: dvc-0 { dmas = <&audma0 0xbc>; @@ -1342,17 +1353,6 @@ mix1: mix-1 { }; }; - rcar_sound,ctu { - ctu00: ctu-0 { }; - ctu01: ctu-1 { }; - ctu02: ctu-2 { }; - ctu03: ctu-3 { }; - ctu10: ctu-4 { }; - ctu11: ctu-5 { }; - ctu12: ctu-6 { }; - ctu13: ctu-7 { }; - }; - rcar_sound,src { src0: src-0 { interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; @@ -1766,7 +1766,9 @@ clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>; clock-names = "du.0", "du.1"; - vsps = <&vspd0 0 &vspd1 0>; + resets = <&cpg 724>; + reset-names = "du.0"; + vsps = <&vspd0 0>, <&vspd1 0>; status = "disabled"; ports { @@ -1864,25 +1866,25 @@ thermal-sensors = <&thermal 0>; sustainable-power = <717>; - trips { - target: trip-point1 { - temperature = <100000>; - hysteresis = <2000>; - type = "passive"; + cooling-maps { + map0 { + trip = <&target>; + cooling-device = <&a53_0 0 2>; + contribution = <1024>; }; + }; + trips { sensor1_crit: sensor1-crit { temperature = <120000>; hysteresis = <2000>; type = "critical"; }; - }; - cooling-maps { - map0 { - trip = <&target>; - cooling-device = <&a53_0 0 2>; - contribution = <1024>; + target: trip-point1 { + temperature = <100000>; + hysteresis = <2000>; + type = "passive"; }; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts index 0711170b26b1..0bbd4d701042 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995-draak.dts +++ b/arch/arm64/boot/dts/renesas/r8a77995-draak.dts @@ -19,11 +19,6 @@ ethernet0 = &avb; }; - chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; - stdout-path = "serial0:115200n8"; - }; - backlight: backlight { compatible = "pwm-backlight"; pwms = <&pwm1 0 50000>; @@ -35,6 +30,11 @@ enable-gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>; }; + chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; + stdout-path = "serial0:115200n8"; + }; + composite-in { compatible = "composite-video-connector"; @@ -175,6 +175,14 @@ reg = <0>; interrupt-parent = <&gpio5>; interrupts = <19 IRQ_TYPE_LEVEL_LOW>; + /* + * TX clock internal delay mode is required for reliable + * 1Gbps communication using the KSZ9031RNX phy present on + * the Draak board, however, TX clock internal delay mode + * isn't supported on r8a77995. Thus, limit speed to + * 100Mbps for reliable communication. + */ + max-speed = <100>; }; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi index 0a344eb55094..183fef86cf7c 100644 --- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi @@ -242,41 +242,6 @@ resets = <&cpg 407>; }; - hscif0: serial@e6540000 { - compatible = "renesas,hscif-r8a77995", - "renesas,rcar-gen3-hscif", - "renesas,hscif"; - reg = <0 0xe6540000 0 0x60>; - interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 520>, - <&cpg CPG_CORE R8A77995_CLK_S3D1C>, - <&scif_clk>; - clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac1 0x31>, <&dmac1 0x30>, - <&dmac2 0x31>, <&dmac2 0x30>; - dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; - resets = <&cpg 520>; - status = "disabled"; - }; - - hscif3: serial@e66a0000 { - compatible = "renesas,hscif-r8a77995", - "renesas,rcar-gen3-hscif", - "renesas,hscif"; - reg = <0 0xe66a0000 0 0x60>; - interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 517>, - <&cpg CPG_CORE R8A77995_CLK_S3D1C>, - <&scif_clk>; - clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x37>, <&dmac0 0x36>; - dma-names = "tx", "rx"; - power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; - resets = <&cpg 517>; - status = "disabled"; - }; - i2c0: i2c@e6500000 { #address-cells = <1>; #size-cells = <0>; @@ -344,6 +309,41 @@ status = "disabled"; }; + hscif0: serial@e6540000 { + compatible = "renesas,hscif-r8a77995", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6540000 0 0x60>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 520>, + <&cpg CPG_CORE R8A77995_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x31>, <&dmac1 0x30>, + <&dmac2 0x31>, <&dmac2 0x30>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 520>; + status = "disabled"; + }; + + hscif3: serial@e66a0000 { + compatible = "renesas,hscif-r8a77995", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe66a0000 0 0x60>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 517>, + <&cpg CPG_CORE R8A77995_CLK_S3D1C>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x37>, <&dmac0 0x36>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; + resets = <&cpg 517>; + status = "disabled"; + }; + hsusb: usb@e6590000 { compatible = "renesas,usbhs-r8a77995", "renesas,rcar-gen3-usbhs"; @@ -995,13 +995,15 @@ du: display@feb00000 { compatible = "renesas,du-r8a77995"; - reg = <0 0xfeb00000 0 0x80000>; + reg = <0 0xfeb00000 0 0x40000>; interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>; clock-names = "du.0", "du.1"; - vsps = <&vspd0 0 &vspd1 0>; + resets = <&cpg 724>; + reset-names = "du.0"; + vsps = <&vspd0 0>, <&vspd1 0>; status = "disabled"; ports { @@ -1098,6 +1100,9 @@ polling-delay = <1000>; thermal-sensors = <&thermal>; + cooling-maps { + }; + trips { cpu-crit { temperature = <120000>; @@ -1105,9 +1110,6 @@ type = "critical"; }; }; - - cooling-maps { - }; }; }; diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi index 5c2c84723ec5..21e01056e759 100644 --- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi @@ -87,6 +87,28 @@ }; }; + hdmi0-out { + compatible = "hdmi-connector"; + label = "HDMI0 OUT"; + type = "a"; + + port { + hdmi0_con: endpoint { + }; + }; + }; + + hdmi1-out { + compatible = "hdmi-connector"; + label = "HDMI1 OUT"; + type = "a"; + + port { + hdmi1_con: endpoint { + }; + }; + }; + keys { compatible = "gpio-keys"; @@ -238,28 +260,6 @@ 1800000 0>; }; - hdmi0-out { - compatible = "hdmi-connector"; - label = "HDMI0 OUT"; - type = "a"; - - port { - hdmi0_con: endpoint { - }; - }; - }; - - hdmi1-out { - compatible = "hdmi-connector"; - label = "HDMI1 OUT"; - type = "a"; - - port { - hdmi1_con: endpoint { - }; - }; - }; - vga { compatible = "vga-connector"; @@ -462,20 +462,6 @@ #gpio-cells = <2>; }; - csa_vdd: adc@7c { - compatible = "maxim,max9611"; - reg = <0x7c>; - - shunt-resistor-micro-ohms = <5000>; - }; - - csa_dvfs: adc@7f { - compatible = "maxim,max9611"; - reg = <0x7f>; - - shunt-resistor-micro-ohms = <5000>; - }; - video-receiver@70 { compatible = "adi,adv7482"; reg = <0x70 0x71 0x72 0x73 0x74 0x75 @@ -527,6 +513,20 @@ }; }; }; + + csa_vdd: adc@7c { + compatible = "maxim,max9611"; + reg = <0x7c>; + + shunt-resistor-micro-ohms = <5000>; + }; + + csa_dvfs: adc@7f { + compatible = "maxim,max9611"; + reg = <0x7f>; + + shunt-resistor-micro-ohms = <5000>; + }; }; &i2c_dvfs { diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi index 27851a77f538..202177706cde 100644 --- a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi @@ -83,6 +83,56 @@ }; &i2c2 { + i2cswitch2: i2c-switch@71 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x71>; + reset-gpios = <&gpio5 3 GPIO_ACTIVE_LOW>; + + /* Audio_SDA, Audio_SCL */ + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + + pcm3168a: audio-codec@44 { + #sound-dai-cells = <0>; + compatible = "ti,pcm3168a"; + reg = <0x44>; + clocks = <&clksndsel>; + clock-names = "scki"; + + VDD1-supply = <&snd_3p3v>; + VDD2-supply = <&snd_3p3v>; + VCCAD1-supply = <&snd_vcc5v>; + VCCAD2-supply = <&snd_vcc5v>; + VCCDA1-supply = <&snd_vcc5v>; + VCCDA2-supply = <&snd_vcc5v>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + mclk-fs = <512>; + port@0 { + reg = <0>; + pcm3168a_endpoint_p: endpoint { + remote-endpoint = <&rsnd_for_pcm3168a_play>; + clocks = <&clksndsel>; + }; + }; + port@1 { + reg = <1>; + pcm3168a_endpoint_c: endpoint { + remote-endpoint = <&rsnd_for_pcm3168a_capture>; + clocks = <&clksndsel>; + }; + }; + }; + }; + }; + }; + /* U11 */ gpio_exp_74: gpio@74 { compatible = "ti,tca9539"; @@ -100,13 +150,6 @@ line-name = "Audio_Out_OFF"; }; - sd-wifi-mux { - gpio-hog; - gpios = <5 GPIO_ACTIVE_HIGH>; - output-low; /* Connect WL1837 */ - line-name = "SD WiFi mux"; - }; - hub_pwen { gpio-hog; gpios = <6 GPIO_ACTIVE_HIGH>; @@ -121,6 +164,13 @@ line-name = "HUB rst"; }; + otg_extlpn { + gpio-hog; + gpios = <9 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "OTG EXTLPn"; + }; + otg_offvbusn { gpio-hog; gpios = <8 GPIO_ACTIVE_HIGH>; @@ -128,11 +178,11 @@ line-name = "OTG OFFVBUSn"; }; - otg_extlpn { + sd-wifi-mux { gpio-hog; - gpios = <9 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "OTG EXTLPn"; + gpios = <5 GPIO_ACTIVE_HIGH>; + output-low; /* Connect WL1837 */ + line-name = "SD WiFi mux"; }; snd_rst { @@ -153,59 +203,17 @@ interrupt-parent = <&gpio6>; interrupts = <4 IRQ_TYPE_EDGE_FALLING>; }; +}; - i2cswitch2: i2c-switch@71 { +&i2c4 { + i2cswitch4: i2c-switch@71 { compatible = "nxp,pca9548"; #address-cells = <1>; #size-cells = <0>; reg = <0x71>; - reset-gpios = <&gpio5 3 GPIO_ACTIVE_LOW>; - - /* Audio_SDA, Audio_SCL */ - i2c@7 { - #address-cells = <1>; - #size-cells = <0>; - reg = <7>; - - pcm3168a: audio-codec@44 { - #sound-dai-cells = <0>; - compatible = "ti,pcm3168a"; - reg = <0x44>; - clocks = <&clksndsel>; - clock-names = "scki"; - - VDD1-supply = <&snd_3p3v>; - VDD2-supply = <&snd_3p3v>; - VCCAD1-supply = <&snd_vcc5v>; - VCCAD2-supply = <&snd_vcc5v>; - VCCDA1-supply = <&snd_vcc5v>; - VCCDA2-supply = <&snd_vcc5v>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - mclk-fs = <512>; - port@0 { - reg = <0>; - pcm3168a_endpoint_p: endpoint { - remote-endpoint = <&rsnd_for_pcm3168a_play>; - clocks = <&clksndsel>; - }; - }; - port@1 { - reg = <1>; - pcm3168a_endpoint_c: endpoint { - remote-endpoint = <&rsnd_for_pcm3168a_capture>; - clocks = <&clksndsel>; - }; - }; - }; - }; - }; + reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; }; -}; -&i2c4 { gpio_exp_76: gpio@76 { compatible = "ti,tca9539"; reg = <0x76>; @@ -225,14 +233,6 @@ interrupt-parent = <&gpio5>; interrupts = <9 IRQ_TYPE_EDGE_FALLING>; }; - - i2cswitch4: i2c-switch@71 { - compatible = "nxp,pca9548"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x71>; - reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; - }; }; &ohci0 { @@ -279,14 +279,50 @@ power-source = <3300>; }; + sound_pcm_pins: sound-pcm { + groups = "ssi349_ctrl", "ssi3_data", "ssi4_data"; + function = "ssi"; + }; + usb0_pins: usb0 { groups = "usb0"; function = "usb0"; }; +}; - sound_pcm_pins: sound-pcm { - groups = "ssi349_ctrl", "ssi3_data", "ssi4_data"; - function = "ssi"; +&rcar_sound { + pinctrl-0 = <&sound_pins + &sound_clk_pins + &sound_pcm_pins>; + + ports { + /* rsnd_port0/1 are on salvator-common */ + rsnd_port2: port@2 { + reg = <2>; + rsnd_for_pcm3168a_play: endpoint { + remote-endpoint = <&pcm3168a_endpoint_p>; + + dai-format = "i2s"; + bitclock-master = <&rsnd_for_pcm3168a_play>; + frame-master = <&rsnd_for_pcm3168a_play>; + dai-tdm-slot-num = <8>; + + playback = <&ssi3>; + }; + }; + rsnd_port3: port@3 { + reg = <3>; + rsnd_for_pcm3168a_capture: endpoint { + remote-endpoint = <&pcm3168a_endpoint_c>; + + dai-format = "i2s"; + bitclock-master = <&rsnd_for_pcm3168a_capture>; + frame-master = <&rsnd_for_pcm3168a_capture>; + dai-tdm-slot-num = <6>; + + capture = <&ssi4>; + }; + }; }; }; @@ -322,17 +358,6 @@ }; }; -&usb2_phy0 { - pinctrl-0 = <&usb0_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&xhci0 { - status = "okay"; -}; - &sound_card { dais = <&rsnd_port0 /* ak4613 */ &rsnd_port1 /* HDMI0 */ @@ -341,42 +366,17 @@ >; }; -&rcar_sound { - pinctrl-0 = <&sound_pins - &sound_clk_pins - &sound_pcm_pins>; - - ports { - /* rsnd_port0/1 are on salvator-common */ - rsnd_port2: port@2 { - reg = <2>; - rsnd_for_pcm3168a_play: endpoint { - remote-endpoint = <&pcm3168a_endpoint_p>; - - dai-format = "i2s"; - bitclock-master = <&rsnd_for_pcm3168a_play>; - frame-master = <&rsnd_for_pcm3168a_play>; - dai-tdm-slot-num = <8>; - - playback = <&ssi3>; - }; - }; - rsnd_port3: port@3 { - reg = <3>; - rsnd_for_pcm3168a_capture: endpoint { - remote-endpoint = <&pcm3168a_endpoint_c>; +&ssi4 { + shared-pin; +}; - dai-format = "i2s"; - bitclock-master = <&rsnd_for_pcm3168a_capture>; - frame-master = <&rsnd_for_pcm3168a_capture>; - dai-tdm-slot-num = <6>; +&usb2_phy0 { + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; - capture = <&ssi4>; - }; - }; - }; + status = "okay"; }; -&ssi4 { - shared-pin; +&xhci0 { + status = "okay"; }; diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi index 7e498b46e9ae..3ef89171538f 100644 --- a/arch/arm64/boot/dts/renesas/ulcb.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi @@ -428,6 +428,11 @@ }; }; +&rwdt { + timeout-sec = <60>; + status = "okay"; +}; + &scif2 { pinctrl-0 = <&scif2_pins>; pinctrl-names = "default"; @@ -478,8 +483,3 @@ status = "okay"; }; - -&rwdt { - timeout-sec = <60>; - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index daa2c78e22c3..1f18a9392d15 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -20,6 +20,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-hugsun-x99.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-khadas-edge.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-khadas-edge-captain.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-khadas-edge-v.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-leez-p710.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopc-t4.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-m4.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-neo4.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts index 3e2272b56eb7..e152b0ca0290 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts @@ -43,6 +43,20 @@ backlight = <&backlight>; power-supply = <&pp3300_disp>; + panel-timing { + clock-frequency = <266604720>; + hactive = <2400>; + hfront-porch = <48>; + hback-porch = <84>; + hsync-len = <32>; + hsync-active = <0>; + vactive = <1600>; + vfront-porch = <3>; + vback-porch = <120>; + vsync-len = <10>; + vsync-active = <0>; + }; + port { panel_in_edp: endpoint { remote-endpoint = <&edp_out_panel>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts b/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts new file mode 100644 index 000000000000..73be38a53796 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts @@ -0,0 +1,645 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Andy Yan <andy.yan@gmail.com> + */ + +/dts-v1/; +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/pwm/pwm.h> +#include "rk3399.dtsi" +#include "rk3399-opp.dtsi" + +/ { + model = "Leez RK3399 P710"; + compatible = "leez,p710", "rockchip,rk3399"; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + clkin_gmac: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "clkin_gmac"; + #clock-cells = <0>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_reg_on_h>; + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; + }; + + dc5v_adp: dc5v-adp { + compatible = "regulator-fixed"; + regulator-name = "dc5v_adapter"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vcc3v3_lan: vcc3v3-lan { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_lan"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vim-supply = <&vcc3v3_sys>; + }; + + vcc3v3_sys: vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_host0: vcc5v0_host1: vcc5v0-host { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_host"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <5500000>; + regulator-max-microvolt = <5500000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_host3: vcc5v0-host3 { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_host3"; + enable-active-high; + gpio = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host3_en>; + regulator-always-on; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_sys: vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc5v_adp>; + }; + + vdd_log: vdd-log { + compatible = "pwm-regulator"; + pwms = <&pwm2 0 25000 1>; + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_b>; +}; + +&emmc_phy { + status = "okay"; +}; + +&gmac { + assigned-clocks = <&cru SCLK_RMII_SRC>; + assigned-clock-parents = <&clkin_gmac>; + clock_in_out = "input"; + phy-supply = <&vcc3v3_lan>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + tx_delay = <0x28>; + rx_delay = <0x11>; + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c7>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec>; + status = "okay"; +}; + +&hdmi_sound { + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <168>; + i2c-scl-falling-time-ns = <4>; + status = "okay"; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio1>; + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc5v0_sys>; + vcc12-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc_1v8>; + + regulators { + vdd_center: DCDC_REG1 { + regulator-name = "vdd_center"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_l: DCDC_REG2 { + regulator-name = "vdd_cpu_l"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG4 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc1v8_dvp: LDO_REG1 { + regulator-name = "vcc1v8_dvp"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc1v8_hdmi: LDO_REG2 { + regulator-name = "vcc1v8_hdmi"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca_1v8: LDO_REG3 { + regulator-name = "vcca_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vccio_sd: LDO_REG4 { + regulator-name = "vccio_sd"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcca3v0_codec: LDO_REG5 { + regulator-name = "vcca3v0_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v5: LDO_REG6 { + regulator-name = "vcc_1v5"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1500000>; + }; + }; + + vcc0v9_hdmi: LDO_REG7 { + regulator-name = "vcc0v9_hdmi"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v0: LDO_REG8 { + regulator-name = "vcc_3v0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + }; + }; + + vdd_cpu_b: regulator@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&vsel1_gpio>; + regulator-name = "vdd_cpu_b"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: regulator@41 { + compatible = "silergy,syr828"; + reg = <0x41>; + fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&vsel2_gpio>; + regulator-name = "vdd_gpu"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c1 { + i2c-scl-rising-time-ns = <300>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + +&i2c3 { + i2c-scl-rising-time-ns = <450>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + +&i2c4 { + i2c-scl-rising-time-ns = <600>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; +}; + +&i2c7 { + status = "okay"; +}; + +&i2s0 { + rockchip,playback-channels = <8>; + rockchip,capture-channels = <8>; + status = "okay"; +}; + +&i2s1 { + rockchip,playback-channels = <2>; + rockchip,capture-channels = <2>; + status = "okay"; +}; + +&i2s2 { + status = "okay"; +}; + +&io_domains { + status = "okay"; + + bt656-supply = <&vcc1v8_dvp>; + audio-supply = <&vcc_1v8>; + sdmmc-supply = <&vccio_sd>; + gpio1830-supply = <&vcc_3v0>; +}; + +&pmu_io_domains { + status = "okay"; + pmu1830-supply = <&vcc_3v0>; +}; + +&pinctrl { + bt { + bt_reg_on_h: bt-reg-on-h { + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_host_wake_l: bt-host-wake-l { + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_l: bt-wake-l { + rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + vsel1_gpio: vsel1-gpio { + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + vsel2_gpio: vsel2-gpio { + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + usb2 { + vcc5v0_host3_en: vcc5v0-host3-en { + rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + wifi { + wifi_reg_on_h: wifi-reg-on-h { + rockchip,pins = + <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wifi_host_wake_l: wifi-host-wake-l { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm2 { + status = "okay"; +}; + +&saradc { + status = "okay"; + + vref-supply = <&vcc_1v8>; +}; + +&sdio0 { + #address-cells = <1>; + #size-cells = <0>; + bus-width = <4>; + clock-frequency = <50000000>; + cap-sdio-irq; + cap-sd-highspeed; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; + sd-uhs-sdr104; + status = "okay"; + + brcmf: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>; + interrupt-names = "host-wake"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_host_wake_l>; + }; +}; + +&sdhci { + bus-width = <8>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + non-removable; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; + disable-wp; + max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cd &sdmmc_cmd &sdmmc_bus4>; + status = "okay"; +}; + +&tcphy0 { + status = "okay"; +}; + +&tcphy1 { + status = "okay"; +}; + +&tsadc { + status = "okay"; + + /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-mode = <1>; + /* tshut polarity 0:LOW 1:HIGH */ + rockchip,hw-tshut-polarity = <1>; +}; + +&u2phy0 { + status = "okay"; + + u2phy0_otg: otg-port { + status = "okay"; + }; + + u2phy0_host: host-port { + phy-supply = <&vcc5v0_host0>; + status = "okay"; + }; +}; + +&u2phy1 { + status = "okay"; + + u2phy1_otg: otg-port { + status = "okay"; + }; + + u2phy1_host: host-port { + phy-supply = <&vcc5v0_host1>; + status = "okay"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_reg_on_h>; + }; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usbdrd3_0 { + status = "okay"; +}; + +&usbdrd_dwc3_0 { + status = "okay"; + dr_mode = "otg"; +}; + +&usbdrd3_1 { + status = "okay"; +}; + +&usbdrd_dwc3_1 { + status = "okay"; + dr_mode = "host"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts index eb5594062006..0401d4ec1f45 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts @@ -58,6 +58,13 @@ }; }; + fan: pwm-fan { + compatible = "pwm-fan"; + #cooling-cells = <2>; + fan-supply = <&vcc12v_dcin>; + pwms = <&pwm1 0 50000 0>; + }; + sdio_pwrseq: sdio-pwrseq { compatible = "mmc-pwrseq-simple"; clocks = <&rk808 1>; @@ -602,6 +609,10 @@ status = "okay"; }; +&pwm1 { + status = "okay"; +}; + &pwm2 { status = "okay"; }; @@ -631,6 +642,16 @@ status = "okay"; }; +&spi1 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + }; +}; + &tcphy0 { status = "okay"; }; diff --git a/arch/arm64/include/asm/arch_gicv3.h b/arch/arm64/include/asm/arch_gicv3.h index 79155a8cfe7c..89e4c8b79349 100644 --- a/arch/arm64/include/asm/arch_gicv3.h +++ b/arch/arm64/include/asm/arch_gicv3.h @@ -155,6 +155,12 @@ static inline void gic_pmr_mask_irqs(void) BUILD_BUG_ON(GICD_INT_DEF_PRI < (GIC_PRIO_IRQOFF | GIC_PRIO_PSR_I_SET)); BUILD_BUG_ON(GICD_INT_DEF_PRI >= GIC_PRIO_IRQON); + /* + * Need to make sure IRQON allows IRQs when SCR_EL3.FIQ is cleared + * and non-secure PMR accesses are not subject to the shifts that + * are applied to IRQ priorities + */ + BUILD_BUG_ON((0x80 | (GICD_INT_DEF_PRI >> 1)) >= GIC_PRIO_IRQON); gic_write_pmr(GIC_PRIO_IRQOFF); } diff --git a/arch/arm64/include/asm/cpufeature.h b/arch/arm64/include/asm/cpufeature.h index 407e2bf23676..c96ffa4722d3 100644 --- a/arch/arm64/include/asm/cpufeature.h +++ b/arch/arm64/include/asm/cpufeature.h @@ -35,9 +35,10 @@ */ enum ftr_type { - FTR_EXACT, /* Use a predefined safe value */ - FTR_LOWER_SAFE, /* Smaller value is safe */ - FTR_HIGHER_SAFE,/* Bigger value is safe */ + FTR_EXACT, /* Use a predefined safe value */ + FTR_LOWER_SAFE, /* Smaller value is safe */ + FTR_HIGHER_SAFE, /* Bigger value is safe */ + FTR_HIGHER_OR_ZERO_SAFE, /* Bigger value is safe, but 0 is biggest */ }; #define FTR_STRICT true /* SANITY check strict matching required */ diff --git a/arch/arm64/include/asm/daifflags.h b/arch/arm64/include/asm/daifflags.h index 987926ed535e..063c964af705 100644 --- a/arch/arm64/include/asm/daifflags.h +++ b/arch/arm64/include/asm/daifflags.h @@ -13,6 +13,8 @@ #define DAIF_PROCCTX 0 #define DAIF_PROCCTX_NOIRQ PSR_I_BIT #define DAIF_ERRCTX (PSR_I_BIT | PSR_A_BIT) +#define DAIF_MASK (PSR_D_BIT | PSR_A_BIT | PSR_I_BIT | PSR_F_BIT) + /* mask/save/unmask/restore all exceptions, including interrupts. */ static inline void local_daif_mask(void) diff --git a/arch/arm64/include/asm/efi.h b/arch/arm64/include/asm/efi.h index 8e79ce9c3f5c..76a144702586 100644 --- a/arch/arm64/include/asm/efi.h +++ b/arch/arm64/include/asm/efi.h @@ -105,7 +105,11 @@ static inline unsigned long efi_get_max_initrd_addr(unsigned long dram_base, ((protocol##_t *)instance)->f(instance, ##__VA_ARGS__) #define alloc_screen_info(x...) &screen_info -#define free_screen_info(x...) + +static inline void free_screen_info(efi_system_table_t *sys_table_arg, + struct screen_info *si) +{ +} /* redeclare as 'hidden' so the compiler will generate relative references */ extern struct screen_info screen_info __attribute__((__visibility__("hidden"))); diff --git a/arch/arm64/include/asm/elf.h b/arch/arm64/include/asm/elf.h index 3c7037c6ba9b..b618017205a3 100644 --- a/arch/arm64/include/asm/elf.h +++ b/arch/arm64/include/asm/elf.h @@ -202,7 +202,7 @@ typedef compat_elf_greg_t compat_elf_gregset_t[COMPAT_ELF_NGREG]; ({ \ set_thread_flag(TIF_32BIT); \ }) -#ifdef CONFIG_GENERIC_COMPAT_VDSO +#ifdef CONFIG_COMPAT_VDSO #define COMPAT_ARCH_DLINFO \ do { \ /* \ diff --git a/arch/arm64/include/asm/kvm_arm.h b/arch/arm64/include/asm/kvm_arm.h index a8b205e5c4a8..ddf9d762ac62 100644 --- a/arch/arm64/include/asm/kvm_arm.h +++ b/arch/arm64/include/asm/kvm_arm.h @@ -316,9 +316,10 @@ #define kvm_arm_exception_class \ ECN(UNKNOWN), ECN(WFx), ECN(CP15_32), ECN(CP15_64), ECN(CP14_MR), \ - ECN(CP14_LS), ECN(FP_ASIMD), ECN(CP10_ID), ECN(CP14_64), ECN(SVC64), \ - ECN(HVC64), ECN(SMC64), ECN(SYS64), ECN(IMP_DEF), ECN(IABT_LOW), \ - ECN(IABT_CUR), ECN(PC_ALIGN), ECN(DABT_LOW), ECN(DABT_CUR), \ + ECN(CP14_LS), ECN(FP_ASIMD), ECN(CP10_ID), ECN(PAC), ECN(CP14_64), \ + ECN(SVC64), ECN(HVC64), ECN(SMC64), ECN(SYS64), ECN(SVE), \ + ECN(IMP_DEF), ECN(IABT_LOW), ECN(IABT_CUR), \ + ECN(PC_ALIGN), ECN(DABT_LOW), ECN(DABT_CUR), \ ECN(SP_ALIGN), ECN(FP_EXC32), ECN(FP_EXC64), ECN(SERROR), \ ECN(BREAKPT_LOW), ECN(BREAKPT_CUR), ECN(SOFTSTP_LOW), \ ECN(SOFTSTP_CUR), ECN(WATCHPT_LOW), ECN(WATCHPT_CUR), \ diff --git a/arch/arm64/include/asm/memory.h b/arch/arm64/include/asm/memory.h index b7ba75809751..fb04f10a78ab 100644 --- a/arch/arm64/include/asm/memory.h +++ b/arch/arm64/include/asm/memory.h @@ -210,7 +210,11 @@ extern u64 vabits_user; #define __tag_reset(addr) untagged_addr(addr) #define __tag_get(addr) (__u8)((u64)(addr) >> 56) #else -#define __tag_set(addr, tag) (addr) +static inline const void *__tag_set(const void *addr, u8 tag) +{ + return addr; +} + #define __tag_reset(addr) (addr) #define __tag_get(addr) 0 #endif @@ -301,8 +305,8 @@ static inline void *phys_to_virt(phys_addr_t x) #define page_to_virt(page) ({ \ unsigned long __addr = \ ((__page_to_voff(page)) | PAGE_OFFSET); \ - unsigned long __addr_tag = \ - __tag_set(__addr, page_kasan_tag(page)); \ + const void *__addr_tag = \ + __tag_set((void *)__addr, page_kasan_tag(page)); \ ((void *)__addr_tag); \ }) diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h index 87a4b2ddc1a1..e09760ece844 100644 --- a/arch/arm64/include/asm/pgtable.h +++ b/arch/arm64/include/asm/pgtable.h @@ -209,7 +209,7 @@ static inline pmd_t pmd_mkcont(pmd_t pmd) static inline pte_t pte_mkdevmap(pte_t pte) { - return set_pte_bit(pte, __pgprot(PTE_DEVMAP)); + return set_pte_bit(pte, __pgprot(PTE_DEVMAP | PTE_SPECIAL)); } static inline void set_pte(pte_t *ptep, pte_t pte) @@ -301,7 +301,6 @@ static inline int pte_same(pte_t pte_a, pte_t pte_b) /* * Huge pte definitions. */ -#define pte_huge(pte) (!(pte_val(pte) & PTE_TABLE_BIT)) #define pte_mkhuge(pte) (__pte(pte_val(pte) & ~PTE_TABLE_BIT)) /* @@ -397,7 +396,10 @@ static inline int pmd_protnone(pmd_t pmd) #ifdef CONFIG_TRANSPARENT_HUGEPAGE #define pmd_devmap(pmd) pte_devmap(pmd_pte(pmd)) #endif -#define pmd_mkdevmap(pmd) pte_pmd(pte_mkdevmap(pmd_pte(pmd))) +static inline pmd_t pmd_mkdevmap(pmd_t pmd) +{ + return pte_pmd(set_pte_bit(pmd_pte(pmd), __pgprot(PTE_DEVMAP))); +} #define __pmd_to_phys(pmd) __pte_to_phys(pmd_pte(pmd)) #define __phys_to_pmd_val(phys) __phys_to_pte_val(phys) @@ -448,8 +450,8 @@ extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn, PMD_TYPE_SECT) #if defined(CONFIG_ARM64_64K_PAGES) || CONFIG_PGTABLE_LEVELS < 3 -#define pud_sect(pud) (0) -#define pud_table(pud) (1) +static inline bool pud_sect(pud_t pud) { return false; } +static inline bool pud_table(pud_t pud) { return true; } #else #define pud_sect(pud) ((pud_val(pud) & PUD_TYPE_MASK) == \ PUD_TYPE_SECT) diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h index fd5b1a4efc70..844e2964b0f5 100644 --- a/arch/arm64/include/asm/processor.h +++ b/arch/arm64/include/asm/processor.h @@ -193,6 +193,16 @@ static inline void start_thread_common(struct pt_regs *regs, unsigned long pc) regs->pmr_save = GIC_PRIO_IRQON; } +static inline void set_ssbs_bit(struct pt_regs *regs) +{ + regs->pstate |= PSR_SSBS_BIT; +} + +static inline void set_compat_ssbs_bit(struct pt_regs *regs) +{ + regs->pstate |= PSR_AA32_SSBS_BIT; +} + static inline void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long sp) { @@ -200,7 +210,7 @@ static inline void start_thread(struct pt_regs *regs, unsigned long pc, regs->pstate = PSR_MODE_EL0t; if (arm64_get_ssbd_state() != ARM64_SSBD_FORCE_ENABLE) - regs->pstate |= PSR_SSBS_BIT; + set_ssbs_bit(regs); regs->sp = sp; } @@ -219,7 +229,7 @@ static inline void compat_start_thread(struct pt_regs *regs, unsigned long pc, #endif if (arm64_get_ssbd_state() != ARM64_SSBD_FORCE_ENABLE) - regs->pstate |= PSR_AA32_SSBS_BIT; + set_compat_ssbs_bit(regs); regs->compat_sp = sp; } diff --git a/arch/arm64/include/asm/ptrace.h b/arch/arm64/include/asm/ptrace.h index b1dd039023ef..1dcf63a9ac1f 100644 --- a/arch/arm64/include/asm/ptrace.h +++ b/arch/arm64/include/asm/ptrace.h @@ -30,7 +30,7 @@ * in the the priority mask, it indicates that PSR.I should be set and * interrupt disabling temporarily does not rely on IRQ priorities. */ -#define GIC_PRIO_IRQON 0xc0 +#define GIC_PRIO_IRQON 0xe0 #define GIC_PRIO_IRQOFF (GIC_PRIO_IRQON & ~0x80) #define GIC_PRIO_PSR_I_SET (1 << 4) diff --git a/arch/arm64/include/asm/stacktrace.h b/arch/arm64/include/asm/stacktrace.h index df45af931459..4d9b1f48dc39 100644 --- a/arch/arm64/include/asm/stacktrace.h +++ b/arch/arm64/include/asm/stacktrace.h @@ -8,19 +8,12 @@ #include <linux/percpu.h> #include <linux/sched.h> #include <linux/sched/task_stack.h> +#include <linux/types.h> #include <asm/memory.h> #include <asm/ptrace.h> #include <asm/sdei.h> -struct stackframe { - unsigned long fp; - unsigned long pc; -#ifdef CONFIG_FUNCTION_GRAPH_TRACER - int graph; -#endif -}; - enum stack_type { STACK_TYPE_UNKNOWN, STACK_TYPE_TASK, @@ -28,6 +21,7 @@ enum stack_type { STACK_TYPE_OVERFLOW, STACK_TYPE_SDEI_NORMAL, STACK_TYPE_SDEI_CRITICAL, + __NR_STACK_TYPES }; struct stack_info { @@ -36,6 +30,37 @@ struct stack_info { enum stack_type type; }; +/* + * A snapshot of a frame record or fp/lr register values, along with some + * accounting information necessary for robust unwinding. + * + * @fp: The fp value in the frame record (or the real fp) + * @pc: The fp value in the frame record (or the real lr) + * + * @stacks_done: Stacks which have been entirely unwound, for which it is no + * longer valid to unwind to. + * + * @prev_fp: The fp that pointed to this frame record, or a synthetic value + * of 0. This is used to ensure that within a stack, each + * subsequent frame record is at an increasing address. + * @prev_type: The type of stack this frame record was on, or a synthetic + * value of STACK_TYPE_UNKNOWN. This is used to detect a + * transition from one stack to another. + * + * @graph: When FUNCTION_GRAPH_TRACER is selected, holds the index of a + * replacement lr value in the ftrace graph stack. + */ +struct stackframe { + unsigned long fp; + unsigned long pc; + DECLARE_BITMAP(stacks_done, __NR_STACK_TYPES); + unsigned long prev_fp; + enum stack_type prev_type; +#ifdef CONFIG_FUNCTION_GRAPH_TRACER + int graph; +#endif +}; + extern int unwind_frame(struct task_struct *tsk, struct stackframe *frame); extern void walk_stackframe(struct task_struct *tsk, struct stackframe *frame, int (*fn)(struct stackframe *, void *), void *data); @@ -64,8 +89,9 @@ static inline bool on_irq_stack(unsigned long sp, return true; } -static inline bool on_task_stack(struct task_struct *tsk, unsigned long sp, - struct stack_info *info) +static inline bool on_task_stack(const struct task_struct *tsk, + unsigned long sp, + struct stack_info *info) { unsigned long low = (unsigned long)task_stack_page(tsk); unsigned long high = low + THREAD_SIZE; @@ -112,10 +138,13 @@ static inline bool on_overflow_stack(unsigned long sp, * We can only safely access per-cpu stacks from current in a non-preemptible * context. */ -static inline bool on_accessible_stack(struct task_struct *tsk, - unsigned long sp, - struct stack_info *info) +static inline bool on_accessible_stack(const struct task_struct *tsk, + unsigned long sp, + struct stack_info *info) { + if (info) + info->type = STACK_TYPE_UNKNOWN; + if (on_task_stack(tsk, sp, info)) return true; if (tsk != current || preemptible()) @@ -130,4 +159,27 @@ static inline bool on_accessible_stack(struct task_struct *tsk, return false; } +static inline void start_backtrace(struct stackframe *frame, + unsigned long fp, unsigned long pc) +{ + frame->fp = fp; + frame->pc = pc; +#ifdef CONFIG_FUNCTION_GRAPH_TRACER + frame->graph = 0; +#endif + + /* + * Prime the first unwind. + * + * In unwind_frame() we'll check that the FP points to a valid stack, + * which can't be STACK_TYPE_UNKNOWN, and the first unwind will be + * treated as a transition to whichever stack that happens to be. The + * prev_fp value won't be used, but we set it to 0 such that it is + * definitely not an accessible stack address. + */ + bitmap_zero(frame->stacks_done, __NR_STACK_TYPES); + frame->prev_fp = 0; + frame->prev_type = STACK_TYPE_UNKNOWN; +} + #endif /* __ASM_STACKTRACE_H */ diff --git a/arch/arm64/include/asm/vdso/compat_gettimeofday.h b/arch/arm64/include/asm/vdso/compat_gettimeofday.h index f4812777f5c5..c50ee1b7d5cd 100644 --- a/arch/arm64/include/asm/vdso/compat_gettimeofday.h +++ b/arch/arm64/include/asm/vdso/compat_gettimeofday.h @@ -16,6 +16,8 @@ #define VDSO_HAS_CLOCK_GETRES 1 +#define VDSO_HAS_32BIT_FALLBACK 1 + static __always_inline int gettimeofday_fallback(struct __kernel_old_timeval *_tv, struct timezone *_tz) @@ -52,6 +54,23 @@ long clock_gettime_fallback(clockid_t _clkid, struct __kernel_timespec *_ts) } static __always_inline +long clock_gettime32_fallback(clockid_t _clkid, struct old_timespec32 *_ts) +{ + register struct old_timespec32 *ts asm("r1") = _ts; + register clockid_t clkid asm("r0") = _clkid; + register long ret asm ("r0"); + register long nr asm("r7") = __NR_compat_clock_gettime; + + asm volatile( + " swi #0\n" + : "=r" (ret) + : "r" (clkid), "r" (ts), "r" (nr) + : "memory"); + + return ret; +} + +static __always_inline int clock_getres_fallback(clockid_t _clkid, struct __kernel_timespec *_ts) { register struct __kernel_timespec *ts asm("r1") = _ts; @@ -72,6 +91,27 @@ int clock_getres_fallback(clockid_t _clkid, struct __kernel_timespec *_ts) return ret; } +static __always_inline +int clock_getres32_fallback(clockid_t _clkid, struct old_timespec32 *_ts) +{ + register struct old_timespec32 *ts asm("r1") = _ts; + register clockid_t clkid asm("r0") = _clkid; + register long ret asm ("r0"); + register long nr asm("r7") = __NR_compat_clock_getres; + + /* The checks below are required for ABI consistency with arm */ + if ((_clkid >= MAX_CLOCKS) && (_ts == NULL)) + return -EINVAL; + + asm volatile( + " swi #0\n" + : "=r" (ret) + : "r" (clkid), "r" (ts), "r" (nr) + : "memory"); + + return ret; +} + static __always_inline u64 __arch_get_hw_counter(s32 clock_mode) { u64 res; diff --git a/arch/arm64/include/uapi/asm/bpf_perf_event.h b/arch/arm64/include/uapi/asm/bpf_perf_event.h index b551b741653d..5e1e648aeec4 100644 --- a/arch/arm64/include/uapi/asm/bpf_perf_event.h +++ b/arch/arm64/include/uapi/asm/bpf_perf_event.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0 */ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ #ifndef _UAPI__ASM_BPF_PERF_EVENT_H__ #define _UAPI__ASM_BPF_PERF_EVENT_H__ diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c index f29f36a65175..d19d14ba9ae4 100644 --- a/arch/arm64/kernel/cpufeature.c +++ b/arch/arm64/kernel/cpufeature.c @@ -225,8 +225,8 @@ static const struct arm64_ftr_bits ftr_ctr[] = { ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_EXACT, 31, 1, 1), /* RES1 */ ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, CTR_DIC_SHIFT, 1, 1), ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, CTR_IDC_SHIFT, 1, 1), - ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_HIGHER_SAFE, CTR_CWG_SHIFT, 4, 0), - ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_HIGHER_SAFE, CTR_ERG_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_HIGHER_OR_ZERO_SAFE, CTR_CWG_SHIFT, 4, 0), + ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_HIGHER_OR_ZERO_SAFE, CTR_ERG_SHIFT, 4, 0), ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, CTR_DMINLINE_SHIFT, 4, 1), /* * Linux can handle differing I-cache policies. Userspace JITs will @@ -468,6 +468,10 @@ static s64 arm64_ftr_safe_value(const struct arm64_ftr_bits *ftrp, s64 new, case FTR_LOWER_SAFE: ret = new < cur ? new : cur; break; + case FTR_HIGHER_OR_ZERO_SAFE: + if (!cur || !new) + break; + /* Fallthrough */ case FTR_HIGHER_SAFE: ret = new > cur ? new : cur; break; diff --git a/arch/arm64/kernel/debug-monitors.c b/arch/arm64/kernel/debug-monitors.c index f8719bd30850..48222a4760c2 100644 --- a/arch/arm64/kernel/debug-monitors.c +++ b/arch/arm64/kernel/debug-monitors.c @@ -207,16 +207,16 @@ static int call_step_hook(struct pt_regs *regs, unsigned int esr) list = user_mode(regs) ? &user_step_hook : &kernel_step_hook; - rcu_read_lock(); - + /* + * Since single-step exception disables interrupt, this function is + * entirely not preemptible, and we can use rcu list safely here. + */ list_for_each_entry_rcu(hook, list, node) { retval = hook->fn(regs, esr); if (retval == DBG_HOOK_HANDLED) break; } - rcu_read_unlock(); - return retval; } NOKPROBE_SYMBOL(call_step_hook); @@ -305,14 +305,16 @@ static int call_break_hook(struct pt_regs *regs, unsigned int esr) list = user_mode(regs) ? &user_break_hook : &kernel_break_hook; - rcu_read_lock(); + /* + * Since brk exception disables interrupt, this function is + * entirely not preemptible, and we can use rcu list safely here. + */ list_for_each_entry_rcu(hook, list, node) { unsigned int comment = esr & ESR_ELx_BRK64_ISS_COMMENT_MASK; if ((comment & ~hook->mask) == hook->imm) fn = hook->fn; } - rcu_read_unlock(); return fn ? fn(regs, esr) : DBG_HOOK_ERROR; } diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S index 9cdc4592da3e..320a30dbe35e 100644 --- a/arch/arm64/kernel/entry.S +++ b/arch/arm64/kernel/entry.S @@ -586,10 +586,8 @@ el1_sync: b.eq el1_ia cmp x24, #ESR_ELx_EC_SYS64 // configurable trap b.eq el1_undef - cmp x24, #ESR_ELx_EC_SP_ALIGN // stack alignment exception - b.eq el1_sp_pc cmp x24, #ESR_ELx_EC_PC_ALIGN // pc alignment exception - b.eq el1_sp_pc + b.eq el1_pc cmp x24, #ESR_ELx_EC_UNKNOWN // unknown exception in EL1 b.eq el1_undef cmp x24, #ESR_ELx_EC_BREAKPT_CUR // debug exception in EL1 @@ -611,9 +609,11 @@ el1_da: bl do_mem_abort kernel_exit 1 -el1_sp_pc: +el1_pc: /* - * Stack or PC alignment exception handling + * PC alignment exception handling. We don't handle SP alignment faults, + * since we will have hit a recursive exception when trying to push the + * initial pt_regs. */ mrs x0, far_el1 inherit_daif pstate=x23, tmp=x2 @@ -732,9 +732,9 @@ el0_sync: ccmp x24, #ESR_ELx_EC_WFx, #4, ne b.eq el0_sys cmp x24, #ESR_ELx_EC_SP_ALIGN // stack alignment exception - b.eq el0_sp_pc + b.eq el0_sp cmp x24, #ESR_ELx_EC_PC_ALIGN // pc alignment exception - b.eq el0_sp_pc + b.eq el0_pc cmp x24, #ESR_ELx_EC_UNKNOWN // unknown exception in EL0 b.eq el0_undef cmp x24, #ESR_ELx_EC_BREAKPT_LOW // debug exception in EL0 @@ -758,7 +758,7 @@ el0_sync_compat: cmp x24, #ESR_ELx_EC_FP_EXC32 // FP/ASIMD exception b.eq el0_fpsimd_exc cmp x24, #ESR_ELx_EC_PC_ALIGN // pc alignment exception - b.eq el0_sp_pc + b.eq el0_pc cmp x24, #ESR_ELx_EC_UNKNOWN // unknown exception in EL0 b.eq el0_undef cmp x24, #ESR_ELx_EC_CP15_32 // CP15 MRC/MCR trap @@ -858,11 +858,15 @@ el0_fpsimd_exc: mov x1, sp bl do_fpsimd_exc b ret_to_user +el0_sp: + ldr x26, [sp, #S_SP] + b el0_sp_pc +el0_pc: + mrs x26, far_el1 el0_sp_pc: /* * Stack or PC alignment exception handling */ - mrs x26, far_el1 gic_prio_kentry_setup tmp=x0 enable_da_f #ifdef CONFIG_TRACE_IRQFLAGS diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c index eec4776ae5f0..37d3912cfe06 100644 --- a/arch/arm64/kernel/fpsimd.c +++ b/arch/arm64/kernel/fpsimd.c @@ -406,6 +406,18 @@ static __uint128_t arm64_cpu_to_le128(__uint128_t x) #define arm64_le128_to_cpu(x) arm64_cpu_to_le128(x) +static void __fpsimd_to_sve(void *sst, struct user_fpsimd_state const *fst, + unsigned int vq) +{ + unsigned int i; + __uint128_t *p; + + for (i = 0; i < SVE_NUM_ZREGS; ++i) { + p = (__uint128_t *)ZREG(sst, vq, i); + *p = arm64_cpu_to_le128(fst->vregs[i]); + } +} + /* * Transfer the FPSIMD state in task->thread.uw.fpsimd_state to * task->thread.sve_state. @@ -423,17 +435,12 @@ static void fpsimd_to_sve(struct task_struct *task) unsigned int vq; void *sst = task->thread.sve_state; struct user_fpsimd_state const *fst = &task->thread.uw.fpsimd_state; - unsigned int i; - __uint128_t *p; if (!system_supports_sve()) return; vq = sve_vq_from_vl(task->thread.sve_vl); - for (i = 0; i < 32; ++i) { - p = (__uint128_t *)ZREG(sst, vq, i); - *p = arm64_cpu_to_le128(fst->vregs[i]); - } + __fpsimd_to_sve(sst, fst, vq); } /* @@ -459,7 +466,7 @@ static void sve_to_fpsimd(struct task_struct *task) return; vq = sve_vq_from_vl(task->thread.sve_vl); - for (i = 0; i < 32; ++i) { + for (i = 0; i < SVE_NUM_ZREGS; ++i) { p = (__uint128_t const *)ZREG(sst, vq, i); fst->vregs[i] = arm64_le128_to_cpu(*p); } @@ -550,8 +557,6 @@ void sve_sync_from_fpsimd_zeropad(struct task_struct *task) unsigned int vq; void *sst = task->thread.sve_state; struct user_fpsimd_state const *fst = &task->thread.uw.fpsimd_state; - unsigned int i; - __uint128_t *p; if (!test_tsk_thread_flag(task, TIF_SVE)) return; @@ -559,11 +564,7 @@ void sve_sync_from_fpsimd_zeropad(struct task_struct *task) vq = sve_vq_from_vl(task->thread.sve_vl); memset(sst, 0, SVE_SIG_REGS_SIZE(vq)); - - for (i = 0; i < 32; ++i) { - p = (__uint128_t *)ZREG(sst, vq, i); - *p = arm64_cpu_to_le128(fst->vregs[i]); - } + __fpsimd_to_sve(sst, fst, vq); } int sve_set_vector_length(struct task_struct *task, diff --git a/arch/arm64/kernel/hw_breakpoint.c b/arch/arm64/kernel/hw_breakpoint.c index dceb84520948..38ee1514cd9c 100644 --- a/arch/arm64/kernel/hw_breakpoint.c +++ b/arch/arm64/kernel/hw_breakpoint.c @@ -536,13 +536,18 @@ int hw_breakpoint_arch_parse(struct perf_event *bp, /* Aligned */ break; case 1: - /* Allow single byte watchpoint. */ - if (hw->ctrl.len == ARM_BREAKPOINT_LEN_1) - break; case 2: /* Allow halfword watchpoints and breakpoints. */ if (hw->ctrl.len == ARM_BREAKPOINT_LEN_2) break; + + /* Fallthrough */ + case 3: + /* Allow single byte watchpoint. */ + if (hw->ctrl.len == ARM_BREAKPOINT_LEN_1) + break; + + /* Fallthrough */ default: return -EINVAL; } diff --git a/arch/arm64/kernel/module.c b/arch/arm64/kernel/module.c index 46e643e30708..03ff15bffbb6 100644 --- a/arch/arm64/kernel/module.c +++ b/arch/arm64/kernel/module.c @@ -314,18 +314,21 @@ int apply_relocate_add(Elf64_Shdr *sechdrs, /* MOVW instruction relocations. */ case R_AARCH64_MOVW_UABS_G0_NC: overflow_check = false; + /* Fall through */ case R_AARCH64_MOVW_UABS_G0: ovf = reloc_insn_movw(RELOC_OP_ABS, loc, val, 0, AARCH64_INSN_IMM_MOVKZ); break; case R_AARCH64_MOVW_UABS_G1_NC: overflow_check = false; + /* Fall through */ case R_AARCH64_MOVW_UABS_G1: ovf = reloc_insn_movw(RELOC_OP_ABS, loc, val, 16, AARCH64_INSN_IMM_MOVKZ); break; case R_AARCH64_MOVW_UABS_G2_NC: overflow_check = false; + /* Fall through */ case R_AARCH64_MOVW_UABS_G2: ovf = reloc_insn_movw(RELOC_OP_ABS, loc, val, 32, AARCH64_INSN_IMM_MOVKZ); @@ -393,6 +396,7 @@ int apply_relocate_add(Elf64_Shdr *sechdrs, break; case R_AARCH64_ADR_PREL_PG_HI21_NC: overflow_check = false; + /* Fall through */ case R_AARCH64_ADR_PREL_PG_HI21: ovf = reloc_insn_adrp(me, sechdrs, loc, val); if (ovf && ovf != -ERANGE) diff --git a/arch/arm64/kernel/perf_callchain.c b/arch/arm64/kernel/perf_callchain.c index 9d63514b9836..b0e03e052dd1 100644 --- a/arch/arm64/kernel/perf_callchain.c +++ b/arch/arm64/kernel/perf_callchain.c @@ -154,12 +154,7 @@ void perf_callchain_kernel(struct perf_callchain_entry_ctx *entry, return; } - frame.fp = regs->regs[29]; - frame.pc = regs->pc; -#ifdef CONFIG_FUNCTION_GRAPH_TRACER - frame.graph = 0; -#endif - + start_backtrace(&frame, regs->regs[29], regs->pc); walk_stackframe(current, &frame, callchain_trace, entry); } diff --git a/arch/arm64/kernel/probes/kprobes.c b/arch/arm64/kernel/probes/kprobes.c index bd5dfffca272..c4452827419b 100644 --- a/arch/arm64/kernel/probes/kprobes.c +++ b/arch/arm64/kernel/probes/kprobes.c @@ -21,6 +21,7 @@ #include <asm/ptrace.h> #include <asm/cacheflush.h> #include <asm/debug-monitors.h> +#include <asm/daifflags.h> #include <asm/system_misc.h> #include <asm/insn.h> #include <linux/uaccess.h> @@ -168,33 +169,6 @@ static void __kprobes set_current_kprobe(struct kprobe *p) } /* - * When PSTATE.D is set (masked), then software step exceptions can not be - * generated. - * SPSR's D bit shows the value of PSTATE.D immediately before the - * exception was taken. PSTATE.D is set while entering into any exception - * mode, however software clears it for any normal (none-debug-exception) - * mode in the exception entry. Therefore, when we are entering into kprobe - * breakpoint handler from any normal mode then SPSR.D bit is already - * cleared, however it is set when we are entering from any debug exception - * mode. - * Since we always need to generate single step exception after a kprobe - * breakpoint exception therefore we need to clear it unconditionally, when - * we become sure that the current breakpoint exception is for kprobe. - */ -static void __kprobes -spsr_set_debug_flag(struct pt_regs *regs, int mask) -{ - unsigned long spsr = regs->pstate; - - if (mask) - spsr |= PSR_D_BIT; - else - spsr &= ~PSR_D_BIT; - - regs->pstate = spsr; -} - -/* * Interrupts need to be disabled before single-step mode is set, and not * reenabled until after single-step mode ends. * Without disabling interrupt on local CPU, there is a chance of @@ -205,17 +179,17 @@ spsr_set_debug_flag(struct pt_regs *regs, int mask) static void __kprobes kprobes_save_local_irqflag(struct kprobe_ctlblk *kcb, struct pt_regs *regs) { - kcb->saved_irqflag = regs->pstate; + kcb->saved_irqflag = regs->pstate & DAIF_MASK; regs->pstate |= PSR_I_BIT; + /* Unmask PSTATE.D for enabling software step exceptions. */ + regs->pstate &= ~PSR_D_BIT; } static void __kprobes kprobes_restore_local_irqflag(struct kprobe_ctlblk *kcb, struct pt_regs *regs) { - if (kcb->saved_irqflag & PSR_I_BIT) - regs->pstate |= PSR_I_BIT; - else - regs->pstate &= ~PSR_I_BIT; + regs->pstate &= ~DAIF_MASK; + regs->pstate |= kcb->saved_irqflag; } static void __kprobes @@ -252,8 +226,6 @@ static void __kprobes setup_singlestep(struct kprobe *p, set_ss_context(kcb, slot); /* mark pending ss */ - spsr_set_debug_flag(regs, 0); - /* IRQs and single stepping do not mix well. */ kprobes_save_local_irqflag(kcb, regs); kernel_enable_single_step(regs); diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c index 6a869d9f304f..f674f28df663 100644 --- a/arch/arm64/kernel/process.c +++ b/arch/arm64/kernel/process.c @@ -398,7 +398,7 @@ int copy_thread(unsigned long clone_flags, unsigned long stack_start, childregs->pstate |= PSR_UAO_BIT; if (arm64_get_ssbd_state() == ARM64_SSBD_FORCE_DISABLE) - childregs->pstate |= PSR_SSBS_BIT; + set_ssbs_bit(childregs); if (system_uses_irq_prio_masking()) childregs->pmr_save = GIC_PRIO_IRQON; @@ -443,6 +443,32 @@ void uao_thread_switch(struct task_struct *next) } /* + * Force SSBS state on context-switch, since it may be lost after migrating + * from a CPU which treats the bit as RES0 in a heterogeneous system. + */ +static void ssbs_thread_switch(struct task_struct *next) +{ + struct pt_regs *regs = task_pt_regs(next); + + /* + * Nothing to do for kernel threads, but 'regs' may be junk + * (e.g. idle task) so check the flags and bail early. + */ + if (unlikely(next->flags & PF_KTHREAD)) + return; + + /* If the mitigation is enabled, then we leave SSBS clear. */ + if ((arm64_get_ssbd_state() == ARM64_SSBD_FORCE_ENABLE) || + test_tsk_thread_flag(next, TIF_SSBD)) + return; + + if (compat_user_mode(regs)) + set_compat_ssbs_bit(regs); + else if (user_mode(regs)) + set_ssbs_bit(regs); +} + +/* * We store our current task in sp_el0, which is clobbered by userspace. Keep a * shadow copy so that we can restore this upon entry from userspace. * @@ -471,6 +497,7 @@ __notrace_funcgraph struct task_struct *__switch_to(struct task_struct *prev, entry_task_switch(next); uao_thread_switch(next); ptrauth_thread_switch(next); + ssbs_thread_switch(next); /* * Complete any pending TLB or cache maintenance on this CPU in case @@ -498,11 +525,8 @@ unsigned long get_wchan(struct task_struct *p) if (!stack_page) return 0; - frame.fp = thread_saved_fp(p); - frame.pc = thread_saved_pc(p); -#ifdef CONFIG_FUNCTION_GRAPH_TRACER - frame.graph = 0; -#endif + start_backtrace(&frame, thread_saved_fp(p), thread_saved_pc(p)); + do { if (unwind_frame(p, &frame)) goto out; diff --git a/arch/arm64/kernel/return_address.c b/arch/arm64/kernel/return_address.c index b21cba90f82d..a5e8b3b9d798 100644 --- a/arch/arm64/kernel/return_address.c +++ b/arch/arm64/kernel/return_address.c @@ -8,6 +8,7 @@ #include <linux/export.h> #include <linux/ftrace.h> +#include <linux/kprobes.h> #include <asm/stack_pointer.h> #include <asm/stacktrace.h> @@ -29,6 +30,7 @@ static int save_return_addr(struct stackframe *frame, void *d) return 0; } } +NOKPROBE_SYMBOL(save_return_addr); void *return_address(unsigned int level) { @@ -38,12 +40,9 @@ void *return_address(unsigned int level) data.level = level + 2; data.addr = NULL; - frame.fp = (unsigned long)__builtin_frame_address(0); - frame.pc = (unsigned long)return_address; /* dummy */ -#ifdef CONFIG_FUNCTION_GRAPH_TRACER - frame.graph = 0; -#endif - + start_backtrace(&frame, + (unsigned long)__builtin_frame_address(0), + (unsigned long)return_address); walk_stackframe(current, &frame, save_return_addr, &data); if (!data.level) @@ -52,3 +51,4 @@ void *return_address(unsigned int level) return NULL; } EXPORT_SYMBOL_GPL(return_address); +NOKPROBE_SYMBOL(return_address); diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c index ea90d3bd9253..018a33e01b0e 100644 --- a/arch/arm64/kernel/smp.c +++ b/arch/arm64/kernel/smp.c @@ -152,8 +152,8 @@ int __cpu_up(unsigned int cpu, struct task_struct *idle) pr_crit("CPU%u: died during early boot\n", cpu); break; } - /* Fall through */ pr_crit("CPU%u: may not have shut down cleanly\n", cpu); + /* Fall through */ case CPU_STUCK_IN_KERNEL: pr_crit("CPU%u: is stuck in kernel\n", cpu); if (status & CPU_STUCK_REASON_52_BIT_VA) diff --git a/arch/arm64/kernel/stacktrace.c b/arch/arm64/kernel/stacktrace.c index 62d395151abe..a336cb124320 100644 --- a/arch/arm64/kernel/stacktrace.c +++ b/arch/arm64/kernel/stacktrace.c @@ -7,6 +7,7 @@ #include <linux/kernel.h> #include <linux/export.h> #include <linux/ftrace.h> +#include <linux/kprobes.h> #include <linux/sched.h> #include <linux/sched/debug.h> #include <linux/sched/task_stack.h> @@ -29,9 +30,18 @@ * ldp x29, x30, [sp] * add sp, sp, #0x10 */ + +/* + * Unwind from one frame record (A) to the next frame record (B). + * + * We terminate early if the location of B indicates a malformed chain of frame + * records (e.g. a cycle), determined based on the location and fp value of A + * and the location (but not the fp value) of B. + */ int notrace unwind_frame(struct task_struct *tsk, struct stackframe *frame) { unsigned long fp = frame->fp; + struct stack_info info; if (fp & 0xf) return -EINVAL; @@ -39,11 +49,40 @@ int notrace unwind_frame(struct task_struct *tsk, struct stackframe *frame) if (!tsk) tsk = current; - if (!on_accessible_stack(tsk, fp, NULL)) + if (!on_accessible_stack(tsk, fp, &info)) + return -EINVAL; + + if (test_bit(info.type, frame->stacks_done)) return -EINVAL; + /* + * As stacks grow downward, any valid record on the same stack must be + * at a strictly higher address than the prior record. + * + * Stacks can nest in several valid orders, e.g. + * + * TASK -> IRQ -> OVERFLOW -> SDEI_NORMAL + * TASK -> SDEI_NORMAL -> SDEI_CRITICAL -> OVERFLOW + * + * ... but the nesting itself is strict. Once we transition from one + * stack to another, it's never valid to unwind back to that first + * stack. + */ + if (info.type == frame->prev_type) { + if (fp <= frame->prev_fp) + return -EINVAL; + } else { + set_bit(frame->prev_type, frame->stacks_done); + } + + /* + * Record this frame record's values and location. The prev_fp and + * prev_type are only meaningful to the next unwind_frame() invocation. + */ frame->fp = READ_ONCE_NOCHECK(*(unsigned long *)(fp)); frame->pc = READ_ONCE_NOCHECK(*(unsigned long *)(fp + 8)); + frame->prev_fp = fp; + frame->prev_type = info.type; #ifdef CONFIG_FUNCTION_GRAPH_TRACER if (tsk->ret_stack && @@ -73,6 +112,7 @@ int notrace unwind_frame(struct task_struct *tsk, struct stackframe *frame) return 0; } +NOKPROBE_SYMBOL(unwind_frame); void notrace walk_stackframe(struct task_struct *tsk, struct stackframe *frame, int (*fn)(struct stackframe *, void *), void *data) @@ -87,6 +127,7 @@ void notrace walk_stackframe(struct task_struct *tsk, struct stackframe *frame, break; } } +NOKPROBE_SYMBOL(walk_stackframe); #ifdef CONFIG_STACKTRACE struct stack_trace_data { @@ -122,12 +163,7 @@ void save_stack_trace_regs(struct pt_regs *regs, struct stack_trace *trace) data.skip = trace->skip; data.no_sched_functions = 0; - frame.fp = regs->regs[29]; - frame.pc = regs->pc; -#ifdef CONFIG_FUNCTION_GRAPH_TRACER - frame.graph = 0; -#endif - + start_backtrace(&frame, regs->regs[29], regs->pc); walk_stackframe(current, &frame, save_trace, &data); } EXPORT_SYMBOL_GPL(save_stack_trace_regs); @@ -146,17 +182,15 @@ static noinline void __save_stack_trace(struct task_struct *tsk, data.no_sched_functions = nosched; if (tsk != current) { - frame.fp = thread_saved_fp(tsk); - frame.pc = thread_saved_pc(tsk); + start_backtrace(&frame, thread_saved_fp(tsk), + thread_saved_pc(tsk)); } else { /* We don't want this function nor the caller */ data.skip += 2; - frame.fp = (unsigned long)__builtin_frame_address(0); - frame.pc = (unsigned long)__save_stack_trace; + start_backtrace(&frame, + (unsigned long)__builtin_frame_address(0), + (unsigned long)__save_stack_trace); } -#ifdef CONFIG_FUNCTION_GRAPH_TRACER - frame.graph = 0; -#endif walk_stackframe(tsk, &frame, save_trace, &data); diff --git a/arch/arm64/kernel/time.c b/arch/arm64/kernel/time.c index 9f25aedeac9d..0b2946414dc9 100644 --- a/arch/arm64/kernel/time.c +++ b/arch/arm64/kernel/time.c @@ -38,11 +38,8 @@ unsigned long profile_pc(struct pt_regs *regs) if (!in_lock_functions(regs->pc)) return regs->pc; - frame.fp = regs->regs[29]; - frame.pc = regs->pc; -#ifdef CONFIG_FUNCTION_GRAPH_TRACER - frame.graph = 0; -#endif + start_backtrace(&frame, regs->regs[29], regs->pc); + do { int ret = unwind_frame(NULL, &frame); if (ret < 0) diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c index 8c03456dade6..32893b3d9164 100644 --- a/arch/arm64/kernel/traps.c +++ b/arch/arm64/kernel/traps.c @@ -100,18 +100,17 @@ void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk) return; if (tsk == current) { - frame.fp = (unsigned long)__builtin_frame_address(0); - frame.pc = (unsigned long)dump_backtrace; + start_backtrace(&frame, + (unsigned long)__builtin_frame_address(0), + (unsigned long)dump_backtrace); } else { /* * task blocked in __switch_to */ - frame.fp = thread_saved_fp(tsk); - frame.pc = thread_saved_pc(tsk); + start_backtrace(&frame, + thread_saved_fp(tsk), + thread_saved_pc(tsk)); } -#ifdef CONFIG_FUNCTION_GRAPH_TRACER - frame.graph = 0; -#endif printk("Call trace:\n"); do { @@ -734,6 +733,7 @@ static const char *esr_class_str[] = { [ESR_ELx_EC_CP14_LS] = "CP14 LDC/STC", [ESR_ELx_EC_FP_ASIMD] = "ASIMD", [ESR_ELx_EC_CP10_ID] = "CP10 MRC/VMRS", + [ESR_ELx_EC_PAC] = "PAC", [ESR_ELx_EC_CP14_64] = "CP14 MCRR/MRRC", [ESR_ELx_EC_ILL] = "PSTATE.IL", [ESR_ELx_EC_SVC32] = "SVC (AArch32)", diff --git a/arch/arm64/kernel/vdso/Makefile b/arch/arm64/kernel/vdso/Makefile index 4ab863045188..dd2514bb1511 100644 --- a/arch/arm64/kernel/vdso/Makefile +++ b/arch/arm64/kernel/vdso/Makefile @@ -32,10 +32,10 @@ UBSAN_SANITIZE := n OBJECT_FILES_NON_STANDARD := y KCOV_INSTRUMENT := n -ifeq ($(c-gettimeofday-y),) CFLAGS_vgettimeofday.o = -O2 -mcmodel=tiny -else -CFLAGS_vgettimeofday.o = -O2 -mcmodel=tiny -include $(c-gettimeofday-y) + +ifneq ($(c-gettimeofday-y),) + CFLAGS_vgettimeofday.o += -include $(c-gettimeofday-y) endif # Clang versions less than 8 do not support -mcmodel=tiny @@ -57,8 +57,7 @@ $(obj)/vdso.o : $(obj)/vdso.so # Link rule for the .so file, .lds has to be first $(obj)/vdso.so.dbg: $(obj)/vdso.lds $(obj-vdso) FORCE - $(call if_changed,ld) - $(call if_changed,vdso_check) + $(call if_changed,vdsold_and_vdso_check) # Strip rule for the .so file $(obj)/%.so: OBJCOPYFLAGS := -S @@ -74,8 +73,8 @@ include/generated/vdso-offsets.h: $(obj)/vdso.so.dbg FORCE $(call if_changed,vdsosym) # Actual build commands -quiet_cmd_vdsocc = VDSOCC $@ - cmd_vdsocc = $(CC) $(a_flags) $(c_flags) -c -o $@ $< +quiet_cmd_vdsold_and_vdso_check = LD $@ + cmd_vdsold_and_vdso_check = $(cmd_ld); $(cmd_vdso_check) # Install commands for the unstripped file quiet_cmd_vdso_install = INSTALL $@ diff --git a/arch/arm64/kernel/vdso32/Makefile b/arch/arm64/kernel/vdso32/Makefile index 60a4c6239712..1fba0776ed40 100644 --- a/arch/arm64/kernel/vdso32/Makefile +++ b/arch/arm64/kernel/vdso32/Makefile @@ -144,8 +144,7 @@ $(obj)/vdso.so.dbg: $(obj)/vdso.so.raw $(obj)/$(munge) FORCE # Link rule for the .so file, .lds has to be first $(obj)/vdso.so.raw: $(src)/vdso.lds $(obj-vdso) FORCE - $(call if_changed,vdsold) - $(call if_changed,vdso_check) + $(call if_changed,vdsold_and_vdso_check) # Compilation rules for the vDSO sources $(c-obj-vdso): %.o: %.c FORCE @@ -156,14 +155,17 @@ $(asm-obj-vdso): %.o: %.S FORCE $(call if_changed_dep,vdsoas) # Actual build commands -quiet_cmd_vdsold = VDSOL $@ +quiet_cmd_vdsold_and_vdso_check = LD32 $@ + cmd_vdsold_and_vdso_check = $(cmd_vdsold); $(cmd_vdso_check) + +quiet_cmd_vdsold = LD32 $@ cmd_vdsold = $(COMPATCC) -Wp,-MD,$(depfile) $(VDSO_LDFLAGS) \ -Wl,-T $(filter %.lds,$^) $(filter %.o,$^) -o $@ -quiet_cmd_vdsocc = VDSOC $@ +quiet_cmd_vdsocc = CC32 $@ cmd_vdsocc = $(COMPATCC) -Wp,-MD,$(depfile) $(VDSO_CFLAGS) -c -o $@ $< -quiet_cmd_vdsocc_gettimeofday = VDSOC_GTD $@ +quiet_cmd_vdsocc_gettimeofday = CC32 $@ cmd_vdsocc_gettimeofday = $(COMPATCC) -Wp,-MD,$(depfile) $(VDSO_CFLAGS) $(VDSO_CFLAGS_gettimeofday_o) -c -o $@ $< -quiet_cmd_vdsoas = VDSOA $@ +quiet_cmd_vdsoas = AS32 $@ cmd_vdsoas = $(COMPATCC) -Wp,-MD,$(depfile) $(VDSO_AFLAGS) -c -o $@ $< quiet_cmd_vdsomunge = MUNGE $@ diff --git a/arch/arm64/kvm/hyp/debug-sr.c b/arch/arm64/kvm/hyp/debug-sr.c index 26781da3ad3e..0fc9872a1467 100644 --- a/arch/arm64/kvm/hyp/debug-sr.c +++ b/arch/arm64/kvm/hyp/debug-sr.c @@ -18,40 +18,70 @@ #define save_debug(ptr,reg,nr) \ switch (nr) { \ case 15: ptr[15] = read_debug(reg, 15); \ + /* Fall through */ \ case 14: ptr[14] = read_debug(reg, 14); \ + /* Fall through */ \ case 13: ptr[13] = read_debug(reg, 13); \ + /* Fall through */ \ case 12: ptr[12] = read_debug(reg, 12); \ + /* Fall through */ \ case 11: ptr[11] = read_debug(reg, 11); \ + /* Fall through */ \ case 10: ptr[10] = read_debug(reg, 10); \ + /* Fall through */ \ case 9: ptr[9] = read_debug(reg, 9); \ + /* Fall through */ \ case 8: ptr[8] = read_debug(reg, 8); \ + /* Fall through */ \ case 7: ptr[7] = read_debug(reg, 7); \ + /* Fall through */ \ case 6: ptr[6] = read_debug(reg, 6); \ + /* Fall through */ \ case 5: ptr[5] = read_debug(reg, 5); \ + /* Fall through */ \ case 4: ptr[4] = read_debug(reg, 4); \ + /* Fall through */ \ case 3: ptr[3] = read_debug(reg, 3); \ + /* Fall through */ \ case 2: ptr[2] = read_debug(reg, 2); \ + /* Fall through */ \ case 1: ptr[1] = read_debug(reg, 1); \ + /* Fall through */ \ default: ptr[0] = read_debug(reg, 0); \ } #define restore_debug(ptr,reg,nr) \ switch (nr) { \ case 15: write_debug(ptr[15], reg, 15); \ + /* Fall through */ \ case 14: write_debug(ptr[14], reg, 14); \ + /* Fall through */ \ case 13: write_debug(ptr[13], reg, 13); \ + /* Fall through */ \ case 12: write_debug(ptr[12], reg, 12); \ + /* Fall through */ \ case 11: write_debug(ptr[11], reg, 11); \ + /* Fall through */ \ case 10: write_debug(ptr[10], reg, 10); \ + /* Fall through */ \ case 9: write_debug(ptr[9], reg, 9); \ + /* Fall through */ \ case 8: write_debug(ptr[8], reg, 8); \ + /* Fall through */ \ case 7: write_debug(ptr[7], reg, 7); \ + /* Fall through */ \ case 6: write_debug(ptr[6], reg, 6); \ + /* Fall through */ \ case 5: write_debug(ptr[5], reg, 5); \ + /* Fall through */ \ case 4: write_debug(ptr[4], reg, 4); \ + /* Fall through */ \ case 3: write_debug(ptr[3], reg, 3); \ + /* Fall through */ \ case 2: write_debug(ptr[2], reg, 2); \ + /* Fall through */ \ case 1: write_debug(ptr[1], reg, 1); \ + /* Fall through */ \ default: write_debug(ptr[0], reg, 0); \ } diff --git a/arch/arm64/kvm/regmap.c b/arch/arm64/kvm/regmap.c index 0d60e4f0af66..a900181e3867 100644 --- a/arch/arm64/kvm/regmap.c +++ b/arch/arm64/kvm/regmap.c @@ -178,13 +178,18 @@ void vcpu_write_spsr32(struct kvm_vcpu *vcpu, unsigned long v) switch (spsr_idx) { case KVM_SPSR_SVC: write_sysreg_el1(v, SYS_SPSR); + break; case KVM_SPSR_ABT: write_sysreg(v, spsr_abt); + break; case KVM_SPSR_UND: write_sysreg(v, spsr_und); + break; case KVM_SPSR_IRQ: write_sysreg(v, spsr_irq); + break; case KVM_SPSR_FIQ: write_sysreg(v, spsr_fiq); + break; } } diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c index f26e181d881c..2071260a275b 100644 --- a/arch/arm64/kvm/sys_regs.c +++ b/arch/arm64/kvm/sys_regs.c @@ -632,7 +632,7 @@ static void reset_pmcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r) */ val = ((pmcr & ~ARMV8_PMU_PMCR_MASK) | (ARMV8_PMU_PMCR_MASK & 0xdecafbad)) & (~ARMV8_PMU_PMCR_E); - __vcpu_sys_reg(vcpu, PMCR_EL0) = val; + __vcpu_sys_reg(vcpu, r->reg) = val; } static bool check_pmu_access_disabled(struct kvm_vcpu *vcpu, u64 flags) @@ -981,13 +981,13 @@ static bool access_pmuserenr(struct kvm_vcpu *vcpu, struct sys_reg_params *p, /* Silly macro to expand the DBG{BCR,BVR,WVR,WCR}n_EL1 registers in one go */ #define DBG_BCR_BVR_WCR_WVR_EL1(n) \ { SYS_DESC(SYS_DBGBVRn_EL1(n)), \ - trap_bvr, reset_bvr, n, 0, get_bvr, set_bvr }, \ + trap_bvr, reset_bvr, 0, 0, get_bvr, set_bvr }, \ { SYS_DESC(SYS_DBGBCRn_EL1(n)), \ - trap_bcr, reset_bcr, n, 0, get_bcr, set_bcr }, \ + trap_bcr, reset_bcr, 0, 0, get_bcr, set_bcr }, \ { SYS_DESC(SYS_DBGWVRn_EL1(n)), \ - trap_wvr, reset_wvr, n, 0, get_wvr, set_wvr }, \ + trap_wvr, reset_wvr, 0, 0, get_wvr, set_wvr }, \ { SYS_DESC(SYS_DBGWCRn_EL1(n)), \ - trap_wcr, reset_wcr, n, 0, get_wcr, set_wcr } + trap_wcr, reset_wcr, 0, 0, get_wcr, set_wcr } /* Macro to expand the PMEVCNTRn_EL0 register */ #define PMU_PMEVCNTR_EL0(n) \ @@ -1540,7 +1540,7 @@ static const struct sys_reg_desc sys_reg_descs[] = { { SYS_DESC(SYS_CSSELR_EL1), access_csselr, reset_unknown, CSSELR_EL1 }, { SYS_DESC(SYS_CTR_EL0), access_ctr }, - { SYS_DESC(SYS_PMCR_EL0), access_pmcr, reset_pmcr, }, + { SYS_DESC(SYS_PMCR_EL0), access_pmcr, reset_pmcr, PMCR_EL0 }, { SYS_DESC(SYS_PMCNTENSET_EL0), access_pmcnten, reset_unknown, PMCNTENSET_EL0 }, { SYS_DESC(SYS_PMCNTENCLR_EL0), access_pmcnten, NULL, PMCNTENSET_EL0 }, { SYS_DESC(SYS_PMOVSCLR_EL0), access_pmovs, NULL, PMOVSSET_EL0 }, @@ -2254,13 +2254,19 @@ static int emulate_sys_reg(struct kvm_vcpu *vcpu, } static void reset_sys_reg_descs(struct kvm_vcpu *vcpu, - const struct sys_reg_desc *table, size_t num) + const struct sys_reg_desc *table, size_t num, + unsigned long *bmap) { unsigned long i; for (i = 0; i < num; i++) - if (table[i].reset) + if (table[i].reset) { + int reg = table[i].reg; + table[i].reset(vcpu, &table[i]); + if (reg > 0 && reg < NR_SYS_REGS) + set_bit(reg, bmap); + } } /** @@ -2774,18 +2780,16 @@ void kvm_reset_sys_regs(struct kvm_vcpu *vcpu) { size_t num; const struct sys_reg_desc *table; - - /* Catch someone adding a register without putting in reset entry. */ - memset(&vcpu->arch.ctxt.sys_regs, 0x42, sizeof(vcpu->arch.ctxt.sys_regs)); + DECLARE_BITMAP(bmap, NR_SYS_REGS) = { 0, }; /* Generic chip reset first (so target could override). */ - reset_sys_reg_descs(vcpu, sys_reg_descs, ARRAY_SIZE(sys_reg_descs)); + reset_sys_reg_descs(vcpu, sys_reg_descs, ARRAY_SIZE(sys_reg_descs), bmap); table = get_target_table(vcpu->arch.target, true, &num); - reset_sys_reg_descs(vcpu, table, num); + reset_sys_reg_descs(vcpu, table, num, bmap); for (num = 1; num < NR_SYS_REGS; num++) { - if (WARN(__vcpu_sys_reg(vcpu, num) == 0x4242424242424242, + if (WARN(!test_bit(num, bmap), "Didn't reset __vcpu_sys_reg(%zi)\n", num)) break; } diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c index 9568c116ac7f..cfd65b63f36f 100644 --- a/arch/arm64/mm/fault.c +++ b/arch/arm64/mm/fault.c @@ -777,6 +777,53 @@ void __init hook_debug_fault_code(int nr, debug_fault_info[nr].name = name; } +/* + * In debug exception context, we explicitly disable preemption despite + * having interrupts disabled. + * This serves two purposes: it makes it much less likely that we would + * accidentally schedule in exception context and it will force a warning + * if we somehow manage to schedule by accident. + */ +static void debug_exception_enter(struct pt_regs *regs) +{ + /* + * Tell lockdep we disabled irqs in entry.S. Do nothing if they were + * already disabled to preserve the last enabled/disabled addresses. + */ + if (interrupts_enabled(regs)) + trace_hardirqs_off(); + + if (user_mode(regs)) { + RCU_LOCKDEP_WARN(!rcu_is_watching(), "entry code didn't wake RCU"); + } else { + /* + * We might have interrupted pretty much anything. In + * fact, if we're a debug exception, we can even interrupt + * NMI processing. We don't want this code makes in_nmi() + * to return true, but we need to notify RCU. + */ + rcu_nmi_enter(); + } + + preempt_disable(); + + /* This code is a bit fragile. Test it. */ + RCU_LOCKDEP_WARN(!rcu_is_watching(), "exception_enter didn't work"); +} +NOKPROBE_SYMBOL(debug_exception_enter); + +static void debug_exception_exit(struct pt_regs *regs) +{ + preempt_enable_no_resched(); + + if (!user_mode(regs)) + rcu_nmi_exit(); + + if (interrupts_enabled(regs)) + trace_hardirqs_on(); +} +NOKPROBE_SYMBOL(debug_exception_exit); + #ifdef CONFIG_ARM64_ERRATUM_1463225 DECLARE_PER_CPU(int, __in_cortex_a76_erratum_1463225_wa); @@ -817,12 +864,7 @@ asmlinkage void __exception do_debug_exception(unsigned long addr_if_watchpoint, if (cortex_a76_erratum_1463225_debug_handler(regs)) return; - /* - * Tell lockdep we disabled irqs in entry.S. Do nothing if they were - * already disabled to preserve the last enabled/disabled addresses. - */ - if (interrupts_enabled(regs)) - trace_hardirqs_off(); + debug_exception_enter(regs); if (user_mode(regs) && !is_ttbr0_addr(pc)) arm64_apply_bp_hardening(); @@ -832,7 +874,6 @@ asmlinkage void __exception do_debug_exception(unsigned long addr_if_watchpoint, inf->sig, inf->code, (void __user *)pc, esr); } - if (interrupts_enabled(regs)) - trace_hardirqs_on(); + debug_exception_exit(regs); } NOKPROBE_SYMBOL(do_debug_exception); diff --git a/arch/csky/include/uapi/asm/byteorder.h b/arch/csky/include/uapi/asm/byteorder.h index b079ec715cdf..d150cd664873 100644 --- a/arch/csky/include/uapi/asm/byteorder.h +++ b/arch/csky/include/uapi/asm/byteorder.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0 */ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ // Copyright (C) 2018 Hangzhou C-SKY Microsystems co.,ltd. #ifndef __ASM_CSKY_BYTEORDER_H diff --git a/arch/csky/include/uapi/asm/cachectl.h b/arch/csky/include/uapi/asm/cachectl.h index ddf2f39aa925..ed7fad1ea20d 100644 --- a/arch/csky/include/uapi/asm/cachectl.h +++ b/arch/csky/include/uapi/asm/cachectl.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0 */ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ #ifndef __ASM_CSKY_CACHECTL_H #define __ASM_CSKY_CACHECTL_H diff --git a/arch/csky/include/uapi/asm/perf_regs.h b/arch/csky/include/uapi/asm/perf_regs.h index ee323d818592..49d4e147a559 100644 --- a/arch/csky/include/uapi/asm/perf_regs.h +++ b/arch/csky/include/uapi/asm/perf_regs.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0 */ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ // Copyright (C) 2019 Hangzhou C-SKY Microsystems co.,ltd. #ifndef _ASM_CSKY_PERF_REGS_H diff --git a/arch/csky/include/uapi/asm/ptrace.h b/arch/csky/include/uapi/asm/ptrace.h index 4e248d5b86ef..66b2268e324e 100644 --- a/arch/csky/include/uapi/asm/ptrace.h +++ b/arch/csky/include/uapi/asm/ptrace.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0 */ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ // Copyright (C) 2018 Hangzhou C-SKY Microsystems co.,ltd. #ifndef _CSKY_PTRACE_H diff --git a/arch/csky/include/uapi/asm/sigcontext.h b/arch/csky/include/uapi/asm/sigcontext.h index e81e7ff11e36..670c020f2cb8 100644 --- a/arch/csky/include/uapi/asm/sigcontext.h +++ b/arch/csky/include/uapi/asm/sigcontext.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0 */ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ // Copyright (C) 2018 Hangzhou C-SKY Microsystems co.,ltd. #ifndef __ASM_CSKY_SIGCONTEXT_H diff --git a/arch/csky/include/uapi/asm/unistd.h b/arch/csky/include/uapi/asm/unistd.h index ec60e49cea66..211c983c7282 100644 --- a/arch/csky/include/uapi/asm/unistd.h +++ b/arch/csky/include/uapi/asm/unistd.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0 */ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ // Copyright (C) 2018 Hangzhou C-SKY Microsystems co.,ltd. #define __ARCH_WANT_SYS_CLONE diff --git a/arch/mips/cavium-octeon/octeon-usb.c b/arch/mips/cavium-octeon/octeon-usb.c index 1f730ded5224..cc88a08bc1f7 100644 --- a/arch/mips/cavium-octeon/octeon-usb.c +++ b/arch/mips/cavium-octeon/octeon-usb.c @@ -398,6 +398,7 @@ static int dwc3_octeon_clocks_start(struct device *dev, u64 base) default: dev_err(dev, "Invalid ref_clk %u, using 100000000 instead\n", clock_rate); + /* fall through */ case 100000000: mpll_mul = 0x19; if (ref_clk_sel < 2) diff --git a/arch/mips/kernel/cacheinfo.c b/arch/mips/kernel/cacheinfo.c index e0dd66881da6..f777e44653d5 100644 --- a/arch/mips/kernel/cacheinfo.c +++ b/arch/mips/kernel/cacheinfo.c @@ -69,6 +69,8 @@ static int __populate_cache_leaves(unsigned int cpu) if (c->tcache.waysize) populate_cache(tcache, this_leaf, 3, CACHE_TYPE_UNIFIED); + this_cpu_ci->cpu_map_populated = true; + return 0; } diff --git a/arch/mips/kernel/i8253.c b/arch/mips/kernel/i8253.c index 5f209f111e59..df7ddd246eaa 100644 --- a/arch/mips/kernel/i8253.c +++ b/arch/mips/kernel/i8253.c @@ -32,7 +32,8 @@ void __init setup_pit_timer(void) static int __init init_pit_clocksource(void) { - if (num_possible_cpus() > 1) /* PIT does not scale! */ + if (num_possible_cpus() > 1 || /* PIT does not scale! */ + !clockevent_state_periodic(&i8253_clockevent)) return 0; return clocksource_i8253_init(); diff --git a/arch/mips/kvm/emulate.c b/arch/mips/kvm/emulate.c index e5de6bac8197..754094b40a75 100644 --- a/arch/mips/kvm/emulate.c +++ b/arch/mips/kvm/emulate.c @@ -140,6 +140,7 @@ static int kvm_compute_return_epc(struct kvm_vcpu *vcpu, unsigned long instpc, /* These are unconditional and in j_format. */ case jal_op: arch->gprs[31] = instpc + 8; + /* fall through */ case j_op: epc += 4; epc >>= 28; diff --git a/arch/mips/kvm/mips.c b/arch/mips/kvm/mips.c index 2cfe839f0b3a..1109924560d8 100644 --- a/arch/mips/kvm/mips.c +++ b/arch/mips/kvm/mips.c @@ -150,16 +150,6 @@ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type) return 0; } -bool kvm_arch_has_vcpu_debugfs(void) -{ - return false; -} - -int kvm_arch_create_vcpu_debugfs(struct kvm_vcpu *vcpu) -{ - return 0; -} - void kvm_mips_free_vcpus(struct kvm *kvm) { unsigned int i; diff --git a/arch/mips/oprofile/op_model_mipsxx.c b/arch/mips/oprofile/op_model_mipsxx.c index 7c04b17f4a48..96c13a0ab078 100644 --- a/arch/mips/oprofile/op_model_mipsxx.c +++ b/arch/mips/oprofile/op_model_mipsxx.c @@ -172,12 +172,15 @@ static void mipsxx_cpu_setup(void *args) case 4: w_c0_perfctrl3(0); w_c0_perfcntr3(reg.counter[3]); + /* fall through */ case 3: w_c0_perfctrl2(0); w_c0_perfcntr2(reg.counter[2]); + /* fall through */ case 2: w_c0_perfctrl1(0); w_c0_perfcntr1(reg.counter[1]); + /* fall through */ case 1: w_c0_perfctrl0(0); w_c0_perfcntr0(reg.counter[0]); @@ -195,10 +198,13 @@ static void mipsxx_cpu_start(void *args) switch (counters) { case 4: w_c0_perfctrl3(WHAT | reg.control[3]); + /* fall through */ case 3: w_c0_perfctrl2(WHAT | reg.control[2]); + /* fall through */ case 2: w_c0_perfctrl1(WHAT | reg.control[1]); + /* fall through */ case 1: w_c0_perfctrl0(WHAT | reg.control[0]); } @@ -215,10 +221,13 @@ static void mipsxx_cpu_stop(void *args) switch (counters) { case 4: w_c0_perfctrl3(0); + /* fall through */ case 3: w_c0_perfctrl2(0); + /* fall through */ case 2: w_c0_perfctrl1(0); + /* fall through */ case 1: w_c0_perfctrl0(0); } @@ -236,6 +245,7 @@ static int mipsxx_perfcount_handler(void) switch (counters) { #define HANDLE_COUNTER(n) \ + /* fall through */ \ case n + 1: \ control = r_c0_perfctrl ## n(); \ counter = r_c0_perfcntr ## n(); \ @@ -297,12 +307,15 @@ static void reset_counters(void *arg) case 4: w_c0_perfctrl3(0); w_c0_perfcntr3(0); + /* fall through */ case 3: w_c0_perfctrl2(0); w_c0_perfcntr2(0); + /* fall through */ case 2: w_c0_perfctrl1(0); w_c0_perfcntr1(0); + /* fall through */ case 1: w_c0_perfctrl0(0); w_c0_perfcntr0(0); diff --git a/arch/mips/pci/ops-bcm63xx.c b/arch/mips/pci/ops-bcm63xx.c index d02eb9d16b55..925c72348fb6 100644 --- a/arch/mips/pci/ops-bcm63xx.c +++ b/arch/mips/pci/ops-bcm63xx.c @@ -474,6 +474,7 @@ static int bcm63xx_pcie_can_access(struct pci_bus *bus, int devfn) if (PCI_SLOT(devfn) == 0) return bcm_pcie_readl(PCIE_DLSTATUS_REG) & DLSTATUS_PHYLINKUP; + /* else, fall through */ default: return false; } diff --git a/arch/mips/vdso/vdso.h b/arch/mips/vdso/vdso.h index 14b1931be69c..b65b169778e3 100644 --- a/arch/mips/vdso/vdso.h +++ b/arch/mips/vdso/vdso.h @@ -9,6 +9,7 @@ #if _MIPS_SIM != _MIPS_SIM_ABI64 && defined(CONFIG_64BIT) /* Building 32-bit VDSO for the 64-bit kernel. Fake a 32-bit Kconfig. */ +#define BUILD_VDSO32_64 #undef CONFIG_64BIT #define CONFIG_32BIT 1 #ifndef __ASSEMBLY__ diff --git a/arch/nds32/include/uapi/asm/auxvec.h b/arch/nds32/include/uapi/asm/auxvec.h index b5d58ea8decb..bc0b92ab8c15 100644 --- a/arch/nds32/include/uapi/asm/auxvec.h +++ b/arch/nds32/include/uapi/asm/auxvec.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0 */ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ // Copyright (C) 2005-2017 Andes Technology Corporation #ifndef __ASM_AUXVEC_H diff --git a/arch/nds32/include/uapi/asm/byteorder.h b/arch/nds32/include/uapi/asm/byteorder.h index 511e653c709d..c264ef12c49c 100644 --- a/arch/nds32/include/uapi/asm/byteorder.h +++ b/arch/nds32/include/uapi/asm/byteorder.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0 */ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ // Copyright (C) 2005-2017 Andes Technology Corporation #ifndef __NDS32_BYTEORDER_H__ diff --git a/arch/nds32/include/uapi/asm/cachectl.h b/arch/nds32/include/uapi/asm/cachectl.h index 73793662815c..31b9b439d819 100644 --- a/arch/nds32/include/uapi/asm/cachectl.h +++ b/arch/nds32/include/uapi/asm/cachectl.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0 */ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ // Copyright (C) 1994, 1995, 1996 by Ralf Baechle // Copyright (C) 2005-2017 Andes Technology Corporation #ifndef _ASM_CACHECTL diff --git a/arch/nds32/include/uapi/asm/fp_udfiex_crtl.h b/arch/nds32/include/uapi/asm/fp_udfiex_crtl.h index d54a5d6c6538..f17396db16ec 100644 --- a/arch/nds32/include/uapi/asm/fp_udfiex_crtl.h +++ b/arch/nds32/include/uapi/asm/fp_udfiex_crtl.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0 */ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ /* Copyright (C) 2005-2019 Andes Technology Corporation */ #ifndef _FP_UDF_IEX_CRTL_H #define _FP_UDF_IEX_CRTL_H diff --git a/arch/nds32/include/uapi/asm/param.h b/arch/nds32/include/uapi/asm/param.h index 2977534a6bd3..48d00328d328 100644 --- a/arch/nds32/include/uapi/asm/param.h +++ b/arch/nds32/include/uapi/asm/param.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0 */ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ // Copyright (C) 2005-2017 Andes Technology Corporation #ifndef __ASM_NDS32_PARAM_H diff --git a/arch/nds32/include/uapi/asm/ptrace.h b/arch/nds32/include/uapi/asm/ptrace.h index 1a6e01c00e6f..d76217c7c010 100644 --- a/arch/nds32/include/uapi/asm/ptrace.h +++ b/arch/nds32/include/uapi/asm/ptrace.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0 */ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ // Copyright (C) 2005-2017 Andes Technology Corporation #ifndef __UAPI_ASM_NDS32_PTRACE_H diff --git a/arch/nds32/include/uapi/asm/sigcontext.h b/arch/nds32/include/uapi/asm/sigcontext.h index dc89af7ddcc3..6c1e6648878f 100644 --- a/arch/nds32/include/uapi/asm/sigcontext.h +++ b/arch/nds32/include/uapi/asm/sigcontext.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0 */ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ // Copyright (C) 2005-2017 Andes Technology Corporation #ifndef _ASMNDS32_SIGCONTEXT_H diff --git a/arch/nds32/include/uapi/asm/unistd.h b/arch/nds32/include/uapi/asm/unistd.h index a0b2f7b9c0f2..410795e280fe 100644 --- a/arch/nds32/include/uapi/asm/unistd.h +++ b/arch/nds32/include/uapi/asm/unistd.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0 */ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ // Copyright (C) 2005-2017 Andes Technology Corporation #define __ARCH_WANT_STAT64 diff --git a/arch/parisc/Makefile b/arch/parisc/Makefile index 8acb8fa1f8d6..3b77d729057f 100644 --- a/arch/parisc/Makefile +++ b/arch/parisc/Makefile @@ -19,8 +19,6 @@ KBUILD_IMAGE := vmlinuz -KBUILD_DEFCONFIG := default_defconfig - NM = sh $(srctree)/arch/parisc/nm CHECKFLAGS += -D__hppa__=1 LIBGCC = $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name) @@ -182,5 +180,8 @@ define archhelp @echo ' zinstall - Install compressed vmlinuz kernel' endef +archclean: + $(Q)$(MAKE) $(clean)=$(boot) + archheaders: $(Q)$(MAKE) $(build)=arch/parisc/kernel/syscalls all diff --git a/arch/parisc/boot/compressed/Makefile b/arch/parisc/boot/compressed/Makefile index 2da8624e5cf6..1e5879c6a752 100644 --- a/arch/parisc/boot/compressed/Makefile +++ b/arch/parisc/boot/compressed/Makefile @@ -12,6 +12,7 @@ UBSAN_SANITIZE := n targets := vmlinux.lds vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 targets += vmlinux.bin.xz vmlinux.bin.lzma vmlinux.bin.lzo vmlinux.bin.lz4 targets += misc.o piggy.o sizes.h head.o real2.o firmware.o +targets += real2.S firmware.c KBUILD_CFLAGS := -D__KERNEL__ -O2 -DBOOTLOADER KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING @@ -55,7 +56,8 @@ $(obj)/misc.o: $(obj)/sizes.h CPPFLAGS_vmlinux.lds += -I$(objtree)/$(obj) -DBOOTLOADER $(obj)/vmlinux.lds: $(obj)/sizes.h -$(obj)/vmlinux.bin: vmlinux +OBJCOPYFLAGS_vmlinux.bin := -R .comment -R .note -S +$(obj)/vmlinux.bin: vmlinux FORCE $(call if_changed,objcopy) vmlinux.bin.all-y := $(obj)/vmlinux.bin diff --git a/arch/parisc/boot/compressed/vmlinux.lds.S b/arch/parisc/boot/compressed/vmlinux.lds.S index bfd7872739a3..2ac3a643f2eb 100644 --- a/arch/parisc/boot/compressed/vmlinux.lds.S +++ b/arch/parisc/boot/compressed/vmlinux.lds.S @@ -48,8 +48,8 @@ SECTIONS *(.rodata.compressed) } - /* bootloader code and data starts behind area of extracted kernel */ - . = (SZ_end - SZparisc_kernel_start + KERNEL_BINARY_TEXT_START); + /* bootloader code and data starts at least behind area of extracted kernel */ + . = MAX(ABSOLUTE(.), (SZ_end - SZparisc_kernel_start + KERNEL_BINARY_TEXT_START)); /* align on next page boundary */ . = ALIGN(4096); diff --git a/arch/parisc/configs/default_defconfig b/arch/parisc/configs/defconfig index 5b877ca34ebf..5b877ca34ebf 100644 --- a/arch/parisc/configs/default_defconfig +++ b/arch/parisc/configs/defconfig diff --git a/arch/parisc/include/asm/kprobes.h b/arch/parisc/include/asm/kprobes.h index e09cf2deeafe..904034da4974 100644 --- a/arch/parisc/include/asm/kprobes.h +++ b/arch/parisc/include/asm/kprobes.h @@ -50,6 +50,10 @@ struct kprobe_ctlblk { int __kprobes parisc_kprobe_break_handler(struct pt_regs *regs); int __kprobes parisc_kprobe_ss_handler(struct pt_regs *regs); +static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr) +{ + return 0; +} #endif /* CONFIG_KPROBES */ #endif /* _PARISC_KPROBES_H */ diff --git a/arch/parisc/kernel/ftrace.c b/arch/parisc/kernel/ftrace.c index d784ccdd8fef..b6fb30f2e4bf 100644 --- a/arch/parisc/kernel/ftrace.c +++ b/arch/parisc/kernel/ftrace.c @@ -181,8 +181,9 @@ int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec, for (i = 0; i < ARRAY_SIZE(insn); i++) insn[i] = INSN_NOP; + __patch_text((void *)rec->ip, INSN_NOP); __patch_text_multiple((void *)rec->ip + 4 - sizeof(insn), - insn, sizeof(insn)); + insn, sizeof(insn)-4); return 0; } #endif diff --git a/arch/parisc/kernel/pacache.S b/arch/parisc/kernel/pacache.S index ba67893a1d72..df46b0e5a915 100644 --- a/arch/parisc/kernel/pacache.S +++ b/arch/parisc/kernel/pacache.S @@ -63,7 +63,7 @@ ENTRY_CFI(flush_tlb_all_local) /* Flush Instruction Tlb */ - LDREG ITLB_SID_BASE(%r1), %r20 +88: LDREG ITLB_SID_BASE(%r1), %r20 LDREG ITLB_SID_STRIDE(%r1), %r21 LDREG ITLB_SID_COUNT(%r1), %r22 LDREG ITLB_OFF_BASE(%r1), %arg0 @@ -103,6 +103,7 @@ fitonemiddle: /* Loop if LOOP = 1 */ add %r21, %r20, %r20 /* increment space */ fitdone: + ALTERNATIVE(88b, fitdone, ALT_COND_NO_SPLIT_TLB, INSN_NOP) /* Flush Data Tlb */ diff --git a/arch/parisc/math-emu/Makefile b/arch/parisc/math-emu/Makefile index b6c4b254901a..3747a0cbd3b8 100644 --- a/arch/parisc/math-emu/Makefile +++ b/arch/parisc/math-emu/Makefile @@ -18,3 +18,4 @@ obj-y := frnd.o driver.o decode_exc.o fpudispatch.o denormal.o \ # other very old or stripped-down PA-RISC CPUs -- not currently supported obj-$(CONFIG_MATH_EMULATION) += unimplemented-math-emulation.o +CFLAGS_REMOVE_fpudispatch.o = -Wimplicit-fallthrough diff --git a/arch/parisc/mm/fault.c b/arch/parisc/mm/fault.c index 6dd4669ce7a5..adbd5e2144a3 100644 --- a/arch/parisc/mm/fault.c +++ b/arch/parisc/mm/fault.c @@ -66,6 +66,7 @@ parisc_acctyp(unsigned long code, unsigned int inst) case 0x30000000: /* coproc2 */ if (bit22set(inst)) return VM_WRITE; + /* fall through */ case 0x0: /* indexed/memory management */ if (bit22set(inst)) { diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index d8dcd8820369..77f6ebf97113 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -121,6 +121,7 @@ config PPC select ARCH_32BIT_OFF_T if PPC32 select ARCH_HAS_DEBUG_VIRTUAL select ARCH_HAS_DEVMEM_IS_ALLOWED + select ARCH_HAS_DMA_MMAP_PGPROT select ARCH_HAS_ELF_RANDOMIZE select ARCH_HAS_FORTIFY_SOURCE select ARCH_HAS_GCOV_PROFILE_ALL diff --git a/arch/powerpc/include/asm/cache.h b/arch/powerpc/include/asm/cache.h index b3388d95f451..45e3137ccd71 100644 --- a/arch/powerpc/include/asm/cache.h +++ b/arch/powerpc/include/asm/cache.h @@ -107,22 +107,22 @@ extern void _set_L3CR(unsigned long); static inline void dcbz(void *addr) { - __asm__ __volatile__ ("dcbz %y0" : : "Z"(*(u8 *)addr) : "memory"); + __asm__ __volatile__ ("dcbz 0, %0" : : "r"(addr) : "memory"); } static inline void dcbi(void *addr) { - __asm__ __volatile__ ("dcbi %y0" : : "Z"(*(u8 *)addr) : "memory"); + __asm__ __volatile__ ("dcbi 0, %0" : : "r"(addr) : "memory"); } static inline void dcbf(void *addr) { - __asm__ __volatile__ ("dcbf %y0" : : "Z"(*(u8 *)addr) : "memory"); + __asm__ __volatile__ ("dcbf 0, %0" : : "r"(addr) : "memory"); } static inline void dcbst(void *addr) { - __asm__ __volatile__ ("dcbst %y0" : : "Z"(*(u8 *)addr) : "memory"); + __asm__ __volatile__ ("dcbst 0, %0" : : "r"(addr) : "memory"); } #endif /* !__ASSEMBLY__ */ #endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h index 463c63a9fcf1..11112023e327 100644 --- a/arch/powerpc/include/asm/hvcall.h +++ b/arch/powerpc/include/asm/hvcall.h @@ -302,9 +302,14 @@ #define H_SCM_UNBIND_MEM 0x3F0 #define H_SCM_QUERY_BLOCK_MEM_BINDING 0x3F4 #define H_SCM_QUERY_LOGICAL_MEM_BINDING 0x3F8 -#define H_SCM_MEM_QUERY 0x3FC -#define H_SCM_BLOCK_CLEAR 0x400 -#define MAX_HCALL_OPCODE H_SCM_BLOCK_CLEAR +#define H_SCM_UNBIND_ALL 0x3FC +#define H_SCM_HEALTH 0x400 +#define H_SCM_PERFORMANCE_STATS 0x418 +#define MAX_HCALL_OPCODE H_SCM_PERFORMANCE_STATS + +/* Scope args for H_SCM_UNBIND_ALL */ +#define H_UNBIND_SCOPE_ALL (0x1) +#define H_UNBIND_SCOPE_DRC (0x2) /* H_VIOCTL functions */ #define H_GET_VIOA_DUMP_SIZE 0x01 diff --git a/arch/powerpc/include/asm/pmc.h b/arch/powerpc/include/asm/pmc.h index dc9a1ca70edf..c6bbe9778d3c 100644 --- a/arch/powerpc/include/asm/pmc.h +++ b/arch/powerpc/include/asm/pmc.h @@ -27,11 +27,10 @@ static inline void ppc_set_pmu_inuse(int inuse) #ifdef CONFIG_PPC_PSERIES get_lppaca()->pmcregs_in_use = inuse; #endif - } else { + } #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE - get_paca()->pmcregs_in_use = inuse; + get_paca()->pmcregs_in_use = inuse; #endif - } #endif } diff --git a/arch/powerpc/include/asm/unistd.h b/arch/powerpc/include/asm/unistd.h index 68473c3c471c..b0720c7c3fcf 100644 --- a/arch/powerpc/include/asm/unistd.h +++ b/arch/powerpc/include/asm/unistd.h @@ -49,6 +49,7 @@ #define __ARCH_WANT_SYS_FORK #define __ARCH_WANT_SYS_VFORK #define __ARCH_WANT_SYS_CLONE +#define __ARCH_WANT_SYS_CLONE3 #endif /* __ASSEMBLY__ */ #endif /* _ASM_POWERPC_UNISTD_H_ */ diff --git a/arch/powerpc/include/uapi/asm/bpf_perf_event.h b/arch/powerpc/include/uapi/asm/bpf_perf_event.h index b551b741653d..5e1e648aeec4 100644 --- a/arch/powerpc/include/uapi/asm/bpf_perf_event.h +++ b/arch/powerpc/include/uapi/asm/bpf_perf_event.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0 */ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ #ifndef _UAPI__ASM_BPF_PERF_EVENT_H__ #define _UAPI__ASM_BPF_PERF_EVENT_H__ diff --git a/arch/powerpc/include/uapi/asm/kvm_para.h b/arch/powerpc/include/uapi/asm/kvm_para.h index 01555c6ae0f5..be48c2215fa2 100644 --- a/arch/powerpc/include/uapi/asm/kvm_para.h +++ b/arch/powerpc/include/uapi/asm/kvm_para.h @@ -31,7 +31,7 @@ * Struct fields are always 32 or 64 bit aligned, depending on them being 32 * or 64 bit wide respectively. * - * See Documentation/virtual/kvm/ppc-pv.txt + * See Documentation/virt/kvm/ppc-pv.txt */ struct kvm_vcpu_arch_shared { __u64 scratch1; diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 56dfa7a2a6f2..ea0c69236789 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -49,7 +49,8 @@ obj-y := cputable.o ptrace.o syscalls.o \ signal.o sysfs.o cacheinfo.o time.o \ prom.o traps.o setup-common.o \ udbg.o misc.o io.o misc_$(BITS).o \ - of_platform.o prom_parse.o + of_platform.o prom_parse.o \ + dma-common.o obj-$(CONFIG_PPC64) += setup_64.o sys_ppc32.o \ signal_64.o ptrace32.o \ paca.o nvram_64.o firmware.o diff --git a/arch/powerpc/kernel/align.c b/arch/powerpc/kernel/align.c index 7107ad86de65..92045ed64976 100644 --- a/arch/powerpc/kernel/align.c +++ b/arch/powerpc/kernel/align.c @@ -176,9 +176,11 @@ static int emulate_spe(struct pt_regs *regs, unsigned int reg, ret |= __get_user_inatomic(temp.v[1], p++); ret |= __get_user_inatomic(temp.v[2], p++); ret |= __get_user_inatomic(temp.v[3], p++); + /* fall through */ case 4: ret |= __get_user_inatomic(temp.v[4], p++); ret |= __get_user_inatomic(temp.v[5], p++); + /* fall through */ case 2: ret |= __get_user_inatomic(temp.v[6], p++); ret |= __get_user_inatomic(temp.v[7], p++); @@ -259,9 +261,11 @@ static int emulate_spe(struct pt_regs *regs, unsigned int reg, ret |= __put_user_inatomic(data.v[1], p++); ret |= __put_user_inatomic(data.v[2], p++); ret |= __put_user_inatomic(data.v[3], p++); + /* fall through */ case 4: ret |= __put_user_inatomic(data.v[4], p++); ret |= __put_user_inatomic(data.v[5], p++); + /* fall through */ case 2: ret |= __put_user_inatomic(data.v[6], p++); ret |= __put_user_inatomic(data.v[7], p++); diff --git a/arch/powerpc/kernel/dma-common.c b/arch/powerpc/kernel/dma-common.c new file mode 100644 index 000000000000..dc7ef6b17b69 --- /dev/null +++ b/arch/powerpc/kernel/dma-common.c @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Contains common dma routines for all powerpc platforms. + * + * Copyright (C) 2019 Shawn Anastasio. + */ + +#include <linux/mm.h> +#include <linux/dma-noncoherent.h> + +pgprot_t arch_dma_mmap_pgprot(struct device *dev, pgprot_t prot, + unsigned long attrs) +{ + if (!dev_is_dma_coherent(dev)) + return pgprot_noncached(prot); + return prot; +} diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S index 85fdb6d879f1..54fab22c9a43 100644 --- a/arch/powerpc/kernel/entry_32.S +++ b/arch/powerpc/kernel/entry_32.S @@ -597,6 +597,14 @@ ppc_clone: stw r0,_TRAP(r1) /* register set saved */ b sys_clone + .globl ppc_clone3 +ppc_clone3: + SAVE_NVGPRS(r1) + lwz r0,_TRAP(r1) + rlwinm r0,r0,0,0,30 /* clear LSB to indicate full */ + stw r0,_TRAP(r1) /* register set saved */ + b sys_clone3 + .globl ppc_swapcontext ppc_swapcontext: SAVE_NVGPRS(r1) diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index d9105fcf4021..0a0b5310f54a 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -487,6 +487,11 @@ _GLOBAL(ppc_clone) bl sys_clone b .Lsyscall_exit +_GLOBAL(ppc_clone3) + bl save_nvgprs + bl sys_clone3 + b .Lsyscall_exit + _GLOBAL(ppc32_swapcontext) bl save_nvgprs bl compat_sys_swapcontext diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index eee5bef736c8..6ba3cc2ef8ab 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -1531,7 +1531,7 @@ EXC_COMMON(trap_0b_common, 0xb00, unknown_exception) * * Call convention: * - * syscall register convention is in Documentation/powerpc/syscall64-abi.txt + * syscall register convention is in Documentation/powerpc/syscall64-abi.rst * * For hypercalls, the register convention is as follows: * r0 volatile diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c index f50b708d6d77..98600b276f76 100644 --- a/arch/powerpc/kernel/signal_32.c +++ b/arch/powerpc/kernel/signal_32.c @@ -1198,6 +1198,9 @@ SYSCALL_DEFINE0(rt_sigreturn) goto bad; if (MSR_TM_ACTIVE(msr_hi<<32)) { + /* Trying to start TM on non TM system */ + if (!cpu_has_feature(CPU_FTR_TM)) + goto bad; /* We only recheckpoint on return if we're * transaction. */ diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c index 2f80e270c7b0..117515564ec7 100644 --- a/arch/powerpc/kernel/signal_64.c +++ b/arch/powerpc/kernel/signal_64.c @@ -771,6 +771,11 @@ SYSCALL_DEFINE0(rt_sigreturn) if (MSR_TM_ACTIVE(msr)) { /* We recheckpoint on return. */ struct ucontext __user *uc_transact; + + /* Trying to start TM on non TM system */ + if (!cpu_has_feature(CPU_FTR_TM)) + goto badframe; + if (__get_user(uc_transact, &uc->uc_link)) goto badframe; if (restore_tm_sigcontexts(current, &uc->uc_mcontext, diff --git a/arch/powerpc/kernel/syscalls/syscall.tbl b/arch/powerpc/kernel/syscalls/syscall.tbl index 3331749aab20..43f736ed47f2 100644 --- a/arch/powerpc/kernel/syscalls/syscall.tbl +++ b/arch/powerpc/kernel/syscalls/syscall.tbl @@ -516,4 +516,4 @@ 432 common fsmount sys_fsmount 433 common fspick sys_fspick 434 common pidfd_open sys_pidfd_open -# 435 reserved for clone3 +435 nospu clone3 ppc_clone3 diff --git a/arch/powerpc/kvm/book3s_32_mmu.c b/arch/powerpc/kvm/book3s_32_mmu.c index 653936177857..18f244aad7aa 100644 --- a/arch/powerpc/kvm/book3s_32_mmu.c +++ b/arch/powerpc/kvm/book3s_32_mmu.c @@ -239,6 +239,7 @@ static int kvmppc_mmu_book3s_32_xlate_pte(struct kvm_vcpu *vcpu, gva_t eaddr, case 2: case 6: pte->may_write = true; + /* fall through */ case 3: case 5: case 7: diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c index ec1804f822af..cde3f5a4b3e4 100644 --- a/arch/powerpc/kvm/book3s_hv.c +++ b/arch/powerpc/kvm/book3s_hv.c @@ -3569,9 +3569,18 @@ int kvmhv_p9_guest_entry(struct kvm_vcpu *vcpu, u64 time_limit, mtspr(SPRN_DEC, vcpu->arch.dec_expires - mftb()); if (kvmhv_on_pseries()) { + /* + * We need to save and restore the guest visible part of the + * psscr (i.e. using SPRN_PSSCR_PR) since the hypervisor + * doesn't do this for us. Note only required if pseries since + * this is done in kvmhv_load_hv_regs_and_go() below otherwise. + */ + unsigned long host_psscr; /* call our hypervisor to load up HV regs and go */ struct hv_guest_state hvregs; + host_psscr = mfspr(SPRN_PSSCR_PR); + mtspr(SPRN_PSSCR_PR, vcpu->arch.psscr); kvmhv_save_hv_regs(vcpu, &hvregs); hvregs.lpcr = lpcr; vcpu->arch.regs.msr = vcpu->arch.shregs.msr; @@ -3590,6 +3599,8 @@ int kvmhv_p9_guest_entry(struct kvm_vcpu *vcpu, u64 time_limit, vcpu->arch.shregs.msr = vcpu->arch.regs.msr; vcpu->arch.shregs.dar = mfspr(SPRN_DAR); vcpu->arch.shregs.dsisr = mfspr(SPRN_DSISR); + vcpu->arch.psscr = mfspr(SPRN_PSSCR_PR); + mtspr(SPRN_PSSCR_PR, host_psscr); /* H_CEDE has to be handled now, not later */ if (trap == BOOK3S_INTERRUPT_SYSCALL && !vcpu->arch.nested && @@ -3654,6 +3665,8 @@ int kvmhv_p9_guest_entry(struct kvm_vcpu *vcpu, u64 time_limit, vcpu->arch.vpa.dirty = 1; save_pmu = lp->pmcregs_in_use; } + /* Must save pmu if this guest is capable of running nested guests */ + save_pmu |= nesting_enabled(vcpu->kvm); kvmhv_save_guest_pmu(vcpu, save_pmu); diff --git a/arch/powerpc/kvm/book3s_xive.c b/arch/powerpc/kvm/book3s_xive.c index 6ca0d7376a9f..e3ba67095895 100644 --- a/arch/powerpc/kvm/book3s_xive.c +++ b/arch/powerpc/kvm/book3s_xive.c @@ -1986,10 +1986,8 @@ static int kvmppc_xive_create(struct kvm_device *dev, u32 type) xive->single_escalation = xive_native_has_single_escalation(); - if (ret) { - kfree(xive); + if (ret) return ret; - } return 0; } diff --git a/arch/powerpc/kvm/book3s_xive_native.c b/arch/powerpc/kvm/book3s_xive_native.c index 5596c8ec221a..a998823f68a3 100644 --- a/arch/powerpc/kvm/book3s_xive_native.c +++ b/arch/powerpc/kvm/book3s_xive_native.c @@ -1090,9 +1090,9 @@ static int kvmppc_xive_native_create(struct kvm_device *dev, u32 type) xive->ops = &kvmppc_xive_native_ops; if (ret) - kfree(xive); + return ret; - return ret; + return 0; } /* diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c index 0dba7eb24f92..3e566c2e6066 100644 --- a/arch/powerpc/kvm/powerpc.c +++ b/arch/powerpc/kvm/powerpc.c @@ -50,6 +50,11 @@ int kvm_arch_vcpu_runnable(struct kvm_vcpu *v) return !!(v->arch.pending_exceptions) || kvm_request_pending(v); } +bool kvm_arch_dy_runnable(struct kvm_vcpu *vcpu) +{ + return kvm_arch_vcpu_runnable(vcpu); +} + bool kvm_arch_vcpu_in_kernel(struct kvm_vcpu *vcpu) { return false; @@ -452,16 +457,6 @@ err_out: return -EINVAL; } -bool kvm_arch_has_vcpu_debugfs(void) -{ - return false; -} - -int kvm_arch_create_vcpu_debugfs(struct kvm_vcpu *vcpu) -{ - return 0; -} - void kvm_arch_destroy_vm(struct kvm *kvm) { unsigned int i; diff --git a/arch/powerpc/mm/book3s64/hash_utils.c b/arch/powerpc/mm/book3s64/hash_utils.c index 9a5963e07a82..b8ad14bb1170 100644 --- a/arch/powerpc/mm/book3s64/hash_utils.c +++ b/arch/powerpc/mm/book3s64/hash_utils.c @@ -1899,11 +1899,20 @@ void hash__setup_initial_memory_limit(phys_addr_t first_memblock_base, * * For guests on platforms before POWER9, we clamp the it limit to 1G * to avoid some funky things such as RTAS bugs etc... + * + * On POWER9 we limit to 1TB in case the host erroneously told us that + * the RMA was >1TB. Effective address bits 0:23 are treated as zero + * (meaning the access is aliased to zero i.e. addr = addr % 1TB) + * for virtual real mode addressing and so it doesn't make sense to + * have an area larger than 1TB as it can't be addressed. */ if (!early_cpu_has_feature(CPU_FTR_HVMODE)) { ppc64_rma_size = first_memblock_size; if (!early_cpu_has_feature(CPU_FTR_ARCH_300)) ppc64_rma_size = min_t(u64, ppc64_rma_size, 0x40000000); + else + ppc64_rma_size = min_t(u64, ppc64_rma_size, + 1UL << SID_SHIFT_1T); /* Finally limit subsequent allocations */ memblock_set_current_limit(ppc64_rma_size); diff --git a/arch/powerpc/mm/kasan/kasan_init_32.c b/arch/powerpc/mm/kasan/kasan_init_32.c index 0d62be3cba47..74f4555a62ba 100644 --- a/arch/powerpc/mm/kasan/kasan_init_32.c +++ b/arch/powerpc/mm/kasan/kasan_init_32.c @@ -21,7 +21,7 @@ static void kasan_populate_pte(pte_t *ptep, pgprot_t prot) __set_pte_at(&init_mm, va, ptep, pfn_pte(PHYS_PFN(pa), prot), 0); } -static int kasan_init_shadow_page_tables(unsigned long k_start, unsigned long k_end) +static int __ref kasan_init_shadow_page_tables(unsigned long k_start, unsigned long k_end) { pmd_t *pmd; unsigned long k_cur, k_next; @@ -35,7 +35,10 @@ static int kasan_init_shadow_page_tables(unsigned long k_start, unsigned long k_ if ((void *)pmd_page_vaddr(*pmd) != kasan_early_shadow_pte) continue; - new = pte_alloc_one_kernel(&init_mm); + if (slab_is_available()) + new = pte_alloc_one_kernel(&init_mm); + else + new = memblock_alloc(PTE_FRAG_SIZE, PTE_FRAG_SIZE); if (!new) return -ENOMEM; diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index 9259337d7374..9191a66b3bc5 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -239,7 +239,7 @@ void __init paging_init(void) #ifdef CONFIG_ZONE_DMA max_zone_pfns[ZONE_DMA] = min(max_low_pfn, - ((1UL << ARCH_ZONE_DMA_BITS) - 1) >> PAGE_SHIFT); + 1UL << (ARCH_ZONE_DMA_BITS - PAGE_SHIFT)); #endif max_zone_pfns[ZONE_NORMAL] = max_low_pfn; #ifdef CONFIG_HIGHMEM diff --git a/arch/powerpc/platforms/pseries/papr_scm.c b/arch/powerpc/platforms/pseries/papr_scm.c index c8ec670ee924..a5ac371a3f06 100644 --- a/arch/powerpc/platforms/pseries/papr_scm.c +++ b/arch/powerpc/platforms/pseries/papr_scm.c @@ -11,6 +11,7 @@ #include <linux/sched.h> #include <linux/libnvdimm.h> #include <linux/platform_device.h> +#include <linux/delay.h> #include <asm/plpar_wrappers.h> @@ -43,8 +44,9 @@ struct papr_scm_priv { static int drc_pmem_bind(struct papr_scm_priv *p) { unsigned long ret[PLPAR_HCALL_BUFSIZE]; - uint64_t rc, token; uint64_t saved = 0; + uint64_t token; + int64_t rc; /* * When the hypervisor cannot map all the requested memory in a single @@ -64,6 +66,10 @@ static int drc_pmem_bind(struct papr_scm_priv *p) } while (rc == H_BUSY); if (rc) { + /* H_OVERLAP needs a separate error path */ + if (rc == H_OVERLAP) + return -EBUSY; + dev_err(&p->pdev->dev, "bind err: %lld\n", rc); return -ENXIO; } @@ -78,22 +84,36 @@ static int drc_pmem_bind(struct papr_scm_priv *p) static int drc_pmem_unbind(struct papr_scm_priv *p) { unsigned long ret[PLPAR_HCALL_BUFSIZE]; - uint64_t rc, token; + uint64_t token = 0; + int64_t rc; - token = 0; + dev_dbg(&p->pdev->dev, "unbind drc %x\n", p->drc_index); - /* NB: unbind has the same retry requirements mentioned above */ + /* NB: unbind has the same retry requirements as drc_pmem_bind() */ do { - rc = plpar_hcall(H_SCM_UNBIND_MEM, ret, p->drc_index, - p->bound_addr, p->blocks, token); + + /* Unbind of all SCM resources associated with drcIndex */ + rc = plpar_hcall(H_SCM_UNBIND_ALL, ret, H_UNBIND_SCOPE_DRC, + p->drc_index, token); token = ret[0]; - cond_resched(); + + /* Check if we are stalled for some time */ + if (H_IS_LONG_BUSY(rc)) { + msleep(get_longbusy_msecs(rc)); + rc = H_BUSY; + } else if (rc == H_BUSY) { + cond_resched(); + } + } while (rc == H_BUSY); if (rc) dev_err(&p->pdev->dev, "unbind error: %lld\n", rc); + else + dev_dbg(&p->pdev->dev, "unbind drc %x complete\n", + p->drc_index); - return !!rc; + return rc == H_SUCCESS ? 0 : -ENXIO; } static int papr_scm_meta_get(struct papr_scm_priv *p, @@ -255,12 +275,32 @@ static const struct attribute_group *papr_scm_dimm_groups[] = { NULL, }; +static inline int papr_scm_node(int node) +{ + int min_dist = INT_MAX, dist; + int nid, min_node; + + if ((node == NUMA_NO_NODE) || node_online(node)) + return node; + + min_node = first_online_node; + for_each_online_node(nid) { + dist = node_distance(node, nid); + if (dist < min_dist) { + min_dist = dist; + min_node = nid; + } + } + return min_node; +} + static int papr_scm_nvdimm_init(struct papr_scm_priv *p) { struct device *dev = &p->pdev->dev; struct nd_mapping_desc mapping; struct nd_region_desc ndr_desc; unsigned long dimm_flags; + int target_nid, online_nid; p->bus_desc.ndctl = papr_scm_ndctl; p->bus_desc.module = THIS_MODULE; @@ -299,8 +339,10 @@ static int papr_scm_nvdimm_init(struct papr_scm_priv *p) memset(&ndr_desc, 0, sizeof(ndr_desc)); ndr_desc.attr_groups = region_attr_groups; - ndr_desc.numa_node = dev_to_node(&p->pdev->dev); - ndr_desc.target_node = ndr_desc.numa_node; + target_nid = dev_to_node(&p->pdev->dev); + online_nid = papr_scm_node(target_nid); + ndr_desc.numa_node = online_nid; + ndr_desc.target_node = target_nid; ndr_desc.res = &p->res; ndr_desc.of_node = p->dn; ndr_desc.provider_data = p; @@ -318,6 +360,9 @@ static int papr_scm_nvdimm_init(struct papr_scm_priv *p) ndr_desc.res, p->dn); goto err; } + if (target_nid != online_nid) + dev_info(dev, "Region registered with target node %d and online node %d", + target_nid, online_nid); return 0; @@ -389,6 +434,14 @@ static int papr_scm_probe(struct platform_device *pdev) /* request the hypervisor to bind this region to somewhere in memory */ rc = drc_pmem_bind(p); + + /* If phyp says drc memory still bound then force unbound and retry */ + if (rc == -EBUSY) { + dev_warn(&pdev->dev, "Retrying bind after unbinding\n"); + drc_pmem_unbind(p); + rc = drc_pmem_bind(p); + } + if (rc) goto err; diff --git a/arch/powerpc/sysdev/xive/common.c b/arch/powerpc/sysdev/xive/common.c index 082c7e1c20f0..1cdb39575eae 100644 --- a/arch/powerpc/sysdev/xive/common.c +++ b/arch/powerpc/sysdev/xive/common.c @@ -479,7 +479,7 @@ static int xive_find_target_in_mask(const struct cpumask *mask, * Now go through the entire mask until we find a valid * target. */ - for (;;) { + do { /* * We re-check online as the fallback case passes us * an untested affinity mask @@ -487,12 +487,11 @@ static int xive_find_target_in_mask(const struct cpumask *mask, if (cpu_online(cpu) && xive_try_pick_target(cpu)) return cpu; cpu = cpumask_next(cpu, mask); - if (cpu == first) - break; /* Wrap around */ if (cpu >= nr_cpu_ids) cpu = cpumask_first(mask); - } + } while (cpu != first); + return -1; } diff --git a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi index 40983491b95f..42b5ec223100 100644 --- a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi +++ b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi @@ -21,7 +21,6 @@ cpus { #address-cells = <1>; #size-cells = <0>; - timebase-frequency = <1000000>; cpu0: cpu@0 { compatible = "sifive,e51", "sifive,rocket0", "riscv"; device_type = "cpu"; @@ -217,5 +216,20 @@ #size-cells = <0>; status = "disabled"; }; + eth0: ethernet@10090000 { + compatible = "sifive,fu540-c000-gem"; + interrupt-parent = <&plic0>; + interrupts = <53>; + reg = <0x0 0x10090000 0x0 0x2000 + 0x0 0x100a0000 0x0 0x1000>; + local-mac-address = [00 00 00 00 00 00]; + clock-names = "pclk", "hclk"; + clocks = <&prci PRCI_CLK_GEMGXLPLL>, + <&prci PRCI_CLK_GEMGXLPLL>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; }; diff --git a/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts index 0b55c53c08c7..93d68cbd64fe 100644 --- a/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts +++ b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts @@ -76,3 +76,12 @@ disable-wp; }; }; + +ð0 { + status = "okay"; + phy-mode = "gmii"; + phy-handle = <&phy0>; + phy0: ethernet-phy@0 { + reg = <0>; + }; +}; diff --git a/arch/riscv/configs/defconfig b/arch/riscv/configs/defconfig index b7b749b18853..93205c0bf71d 100644 --- a/arch/riscv/configs/defconfig +++ b/arch/riscv/configs/defconfig @@ -34,6 +34,7 @@ CONFIG_PCIEPORTBUS=y CONFIG_PCI_HOST_GENERIC=y CONFIG_PCIE_XILINX=y CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y CONFIG_BLK_DEV_LOOP=y CONFIG_VIRTIO_BLK=y CONFIG_BLK_DEV_SD=y @@ -53,6 +54,8 @@ CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_OF_PLATFORM=y CONFIG_SERIAL_EARLYCON_RISCV_SBI=y CONFIG_HVC_RISCV_SBI=y +CONFIG_SPI=y +CONFIG_SPI_SIFIVE=y # CONFIG_PTP_1588_CLOCK is not set CONFIG_DRM=y CONFIG_DRM_RADEON=y @@ -66,8 +69,9 @@ CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PLATFORM=y CONFIG_USB_STORAGE=y CONFIG_USB_UAS=y +CONFIG_MMC=y +CONFIG_MMC_SPI=y CONFIG_VIRTIO_MMIO=y -CONFIG_SPI_SIFIVE=y CONFIG_EXT4_FS=y CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_AUTOFS4_FS=y @@ -83,8 +87,4 @@ CONFIG_ROOT_NFS=y CONFIG_CRYPTO_USER_API_HASH=y CONFIG_CRYPTO_DEV_VIRTIO=y CONFIG_PRINTK_TIME=y -CONFIG_SPI=y -CONFIG_MMC_SPI=y -CONFIG_MMC=y -CONFIG_DEVTMPFS_MOUNT=y # CONFIG_RCU_TRACE is not set diff --git a/arch/riscv/include/asm/Kbuild b/arch/riscv/include/asm/Kbuild index 1efaeddf1e4b..16970f246860 100644 --- a/arch/riscv/include/asm/Kbuild +++ b/arch/riscv/include/asm/Kbuild @@ -22,6 +22,7 @@ generic-y += kvm_para.h generic-y += local.h generic-y += local64.h generic-y += mm-arch-hooks.h +generic-y += msi.h generic-y += percpu.h generic-y += preempt.h generic-y += sections.h diff --git a/arch/riscv/include/uapi/asm/auxvec.h b/arch/riscv/include/uapi/asm/auxvec.h index 62716653554b..d86cb17bbabe 100644 --- a/arch/riscv/include/uapi/asm/auxvec.h +++ b/arch/riscv/include/uapi/asm/auxvec.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ +/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */ /* * Copyright (C) 2012 ARM Ltd. * Copyright (C) 2015 Regents of the University of California diff --git a/arch/riscv/include/uapi/asm/bitsperlong.h b/arch/riscv/include/uapi/asm/bitsperlong.h index 0b9b58b57ff6..7d0b32e3b701 100644 --- a/arch/riscv/include/uapi/asm/bitsperlong.h +++ b/arch/riscv/include/uapi/asm/bitsperlong.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ +/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */ /* * Copyright (C) 2012 ARM Ltd. * Copyright (C) 2015 Regents of the University of California diff --git a/arch/riscv/include/uapi/asm/byteorder.h b/arch/riscv/include/uapi/asm/byteorder.h index 1920debc09c0..f671e16bf6af 100644 --- a/arch/riscv/include/uapi/asm/byteorder.h +++ b/arch/riscv/include/uapi/asm/byteorder.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ +/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */ /* * Copyright (C) 2012 ARM Ltd. * Copyright (C) 2015 Regents of the University of California diff --git a/arch/riscv/include/uapi/asm/hwcap.h b/arch/riscv/include/uapi/asm/hwcap.h index 7d786145183b..4e7646077056 100644 --- a/arch/riscv/include/uapi/asm/hwcap.h +++ b/arch/riscv/include/uapi/asm/hwcap.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ +/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */ /* * Copied from arch/arm64/include/asm/hwcap.h * diff --git a/arch/riscv/include/uapi/asm/ptrace.h b/arch/riscv/include/uapi/asm/ptrace.h index 92d8f7cd8f84..882547f6bd5c 100644 --- a/arch/riscv/include/uapi/asm/ptrace.h +++ b/arch/riscv/include/uapi/asm/ptrace.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ +/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */ /* * Copyright (C) 2012 Regents of the University of California */ diff --git a/arch/riscv/include/uapi/asm/sigcontext.h b/arch/riscv/include/uapi/asm/sigcontext.h index 053f809e52ce..84f2dfcfdbce 100644 --- a/arch/riscv/include/uapi/asm/sigcontext.h +++ b/arch/riscv/include/uapi/asm/sigcontext.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ +/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */ /* * Copyright (C) 2012 Regents of the University of California */ diff --git a/arch/riscv/include/uapi/asm/ucontext.h b/arch/riscv/include/uapi/asm/ucontext.h index b58e00cee2ec..411dd7b52ed6 100644 --- a/arch/riscv/include/uapi/asm/ucontext.h +++ b/arch/riscv/include/uapi/asm/ucontext.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ +/* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */ /* * Copyright (C) 2012 ARM Ltd. * Copyright (C) 2017 SiFive, Inc. diff --git a/arch/riscv/include/uapi/asm/unistd.h b/arch/riscv/include/uapi/asm/unistd.h index 0e2eeeb1fd27..13ce76cc5aff 100644 --- a/arch/riscv/include/uapi/asm/unistd.h +++ b/arch/riscv/include/uapi/asm/unistd.h @@ -18,6 +18,7 @@ #ifdef __LP64__ #define __ARCH_WANT_NEW_STAT #define __ARCH_WANT_SET_GET_RLIMIT +#define __ARCH_WANT_SYS_CLONE3 #endif /* __LP64__ */ #include <asm-generic/unistd.h> diff --git a/arch/riscv/kernel/vdso/Makefile b/arch/riscv/kernel/vdso/Makefile index f1d6ffe43e42..49a5852fd07d 100644 --- a/arch/riscv/kernel/vdso/Makefile +++ b/arch/riscv/kernel/vdso/Makefile @@ -37,7 +37,7 @@ $(obj)/vdso.so.dbg: $(src)/vdso.lds $(obj-vdso) FORCE # these symbols in the kernel code rather than hand-coded addresses. SYSCFLAGS_vdso.so.dbg = -shared -s -Wl,-soname=linux-vdso.so.1 \ - -Wl,--hash-style=both + -Wl,--build-id -Wl,--hash-style=both $(obj)/vdso-dummy.o: $(src)/vdso.lds $(obj)/rt_sigreturn.o FORCE $(call if_changed,vdsold) diff --git a/arch/riscv/lib/Makefile b/arch/riscv/lib/Makefile index 8e364ebf37de..267feaa10f6a 100644 --- a/arch/riscv/lib/Makefile +++ b/arch/riscv/lib/Makefile @@ -5,5 +5,3 @@ lib-y += memset.o lib-y += uaccess.o lib-$(CONFIG_64BIT) += tishift.o - -lib-$(CONFIG_32BIT) += udivdi3.o diff --git a/arch/riscv/lib/delay.c b/arch/riscv/lib/delay.c index 87ff89e88f2c..f51c9a03bca1 100644 --- a/arch/riscv/lib/delay.c +++ b/arch/riscv/lib/delay.c @@ -81,9 +81,13 @@ EXPORT_SYMBOL(__delay); void udelay(unsigned long usecs) { u64 ucycles = (u64)usecs * lpj_fine * UDELAY_MULT; + u64 n; if (unlikely(usecs > MAX_UDELAY_US)) { - __delay((u64)usecs * riscv_timebase / 1000000ULL); + n = (u64)usecs * riscv_timebase; + do_div(n, 1000000); + + __delay(n); return; } diff --git a/arch/riscv/lib/udivdi3.S b/arch/riscv/lib/udivdi3.S deleted file mode 100644 index 3f07476a91a9..000000000000 --- a/arch/riscv/lib/udivdi3.S +++ /dev/null @@ -1,32 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) 2016-2017 Free Software Foundation, Inc. - */ - -#include <linux/linkage.h> - -ENTRY(__udivdi3) - mv a2, a1 - mv a1, a0 - li a0, -1 - beqz a2, .L5 - li a3, 1 - bgeu a2, a1, .L2 -.L1: - blez a2, .L2 - slli a2, a2, 1 - slli a3, a3, 1 - bgtu a1, a2, .L1 -.L2: - li a0, 0 -.L3: - bltu a1, a2, .L4 - sub a1, a1, a2 - or a0, a0, a3 -.L4: - srli a3, a3, 1 - srli a2, a2, 1 - bnez a3, .L3 -.L5: - ret -ENDPROC(__udivdi3) diff --git a/arch/s390/boot/Makefile b/arch/s390/boot/Makefile index 7cba96e7587b..4cf0bddb7d92 100644 --- a/arch/s390/boot/Makefile +++ b/arch/s390/boot/Makefile @@ -36,7 +36,7 @@ CFLAGS_sclp_early_core.o += -I$(srctree)/drivers/s390/char obj-y := head.o als.o startup.o mem_detect.o ipl_parm.o ipl_report.o obj-y += string.o ebcdic.o sclp_early_core.o mem.o ipl_vmparm.o cmdline.o -obj-y += ctype.o text_dma.o +obj-y += version.o ctype.o text_dma.o obj-$(CONFIG_PROTECTED_VIRTUALIZATION_GUEST) += uv.o obj-$(CONFIG_RELOCATABLE) += machine_kexec_reloc.o obj-$(CONFIG_RANDOMIZE_BASE) += kaslr.o diff --git a/arch/s390/boot/boot.h b/arch/s390/boot/boot.h index ad57c2205a71..1c3b2b257637 100644 --- a/arch/s390/boot/boot.h +++ b/arch/s390/boot/boot.h @@ -8,10 +8,12 @@ void store_ipl_parmblock(void); void setup_boot_command_line(void); void parse_boot_command_line(void); void setup_memory_end(void); +void verify_facilities(void); void print_missing_facilities(void); unsigned long get_random_base(unsigned long safe_addr); extern int kaslr_enabled; +extern const char kernel_version[]; unsigned long read_ipl_report(unsigned long safe_offset); diff --git a/arch/s390/boot/head.S b/arch/s390/boot/head.S index 028aab03a9e7..2087bed6e60f 100644 --- a/arch/s390/boot/head.S +++ b/arch/s390/boot/head.S @@ -361,6 +361,7 @@ ENTRY(startup_kdump) .quad 0 # INITRD_SIZE .quad 0 # OLDMEM_BASE .quad 0 # OLDMEM_SIZE + .quad kernel_version # points to kernel version string .org COMMAND_LINE .byte "root=/dev/ram0 ro" diff --git a/arch/s390/boot/ipl_parm.c b/arch/s390/boot/ipl_parm.c index 3c49bde8aa5e..b8aa6a9f937b 100644 --- a/arch/s390/boot/ipl_parm.c +++ b/arch/s390/boot/ipl_parm.c @@ -48,9 +48,7 @@ void store_ipl_parmblock(void) { int rc; - uv_set_shared(__pa(&ipl_block)); rc = __diag308(DIAG308_STORE, &ipl_block); - uv_remove_shared(__pa(&ipl_block)); if (rc == DIAG308_RC_OK && ipl_block.hdr.version <= IPL_MAX_SUPPORTED_VERSION) ipl_block_valid = 1; diff --git a/arch/s390/boot/kaslr.c b/arch/s390/boot/kaslr.c index 3bdd8132e56b..c34a6387ce38 100644 --- a/arch/s390/boot/kaslr.c +++ b/arch/s390/boot/kaslr.c @@ -7,6 +7,7 @@ #include <asm/timex.h> #include <asm/sclp.h> #include "compressed/decompressor.h" +#include "boot.h" #define PRNG_MODE_TDES 1 #define PRNG_MODE_SHA512 2 diff --git a/arch/s390/boot/version.c b/arch/s390/boot/version.c new file mode 100644 index 000000000000..d32e58bdda6a --- /dev/null +++ b/arch/s390/boot/version.c @@ -0,0 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <generated/utsrelease.h> +#include <generated/compile.h> +#include "boot.h" + +const char kernel_version[] = UTS_RELEASE + " (" LINUX_COMPILE_BY "@" LINUX_COMPILE_HOST ") " UTS_VERSION; diff --git a/arch/s390/configs/debug_defconfig b/arch/s390/configs/debug_defconfig index e26d4413d34c..74e78ec5beb6 100644 --- a/arch/s390/configs/debug_defconfig +++ b/arch/s390/configs/debug_defconfig @@ -3,6 +3,7 @@ CONFIG_POSIX_MQUEUE=y CONFIG_AUDIT=y CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y CONFIG_TASKSTATS=y @@ -18,55 +19,71 @@ CONFIG_BLK_CGROUP=y CONFIG_CFS_BANDWIDTH=y CONFIG_RT_GROUP_SCHED=y CONFIG_CGROUP_PIDS=y +CONFIG_CGROUP_RDMA=y CONFIG_CGROUP_FREEZER=y CONFIG_CGROUP_HUGETLB=y CONFIG_CPUSETS=y CONFIG_CGROUP_DEVICE=y CONFIG_CGROUP_CPUACCT=y CONFIG_CGROUP_PERF=y +CONFIG_CGROUP_BPF=y CONFIG_NAMESPACES=y CONFIG_USER_NS=y +CONFIG_CHECKPOINT_RESTORE=y CONFIG_SCHED_AUTOGROUP=y CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y # CONFIG_SYSFS_SYSCALL is not set -CONFIG_CHECKPOINT_RESTORE=y CONFIG_BPF_SYSCALL=y CONFIG_USERFAULTFD=y # CONFIG_COMPAT_BRK is not set CONFIG_PROFILING=y +CONFIG_LIVEPATCH=y +CONFIG_TUNE_ZEC12=y +CONFIG_NR_CPUS=512 +CONFIG_NUMA=y +CONFIG_HZ_100=y +CONFIG_KEXEC_FILE=y +CONFIG_EXPOLINE=y +CONFIG_EXPOLINE_AUTO=y +CONFIG_CHSC_SCH=y +CONFIG_VFIO_CCW=m +CONFIG_VFIO_AP=m +CONFIG_CRASH_DUMP=y +CONFIG_HIBERNATION=y +CONFIG_PM_DEBUG=y +CONFIG_CMM=m +CONFIG_APPLDATA_BASE=y +CONFIG_KVM=m +CONFIG_VHOST_NET=m +CONFIG_VHOST_VSOCK=m CONFIG_OPROFILE=m CONFIG_KPROBES=y CONFIG_JUMP_LABEL=y CONFIG_STATIC_KEYS_SELFTEST=y +CONFIG_REFCOUNT_FULL=y +CONFIG_LOCK_EVENT_COUNTS=y CONFIG_MODULES=y CONFIG_MODULE_FORCE_LOAD=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_MODULE_SIG=y +CONFIG_MODULE_SIG_SHA256=y CONFIG_BLK_DEV_INTEGRITY=y CONFIG_BLK_DEV_THROTTLING=y CONFIG_BLK_WBT=y -CONFIG_BLK_WBT_SQ=y +CONFIG_BLK_CGROUP_IOLATENCY=y CONFIG_PARTITION_ADVANCED=y CONFIG_IBM_PARTITION=y CONFIG_BSD_DISKLABEL=y CONFIG_MINIX_SUBPARTITION=y CONFIG_SOLARIS_X86_PARTITION=y CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_CFQ_GROUP_IOSCHED=y -CONFIG_DEFAULT_DEADLINE=y -CONFIG_LIVEPATCH=y -CONFIG_TUNE_ZEC12=y -CONFIG_NR_CPUS=512 -CONFIG_NUMA=y -CONFIG_PREEMPT=y -CONFIG_HZ_100=y -CONFIG_KEXEC_FILE=y -CONFIG_KEXEC_VERIFY_SIG=y -CONFIG_EXPOLINE=y -CONFIG_EXPOLINE_AUTO=y +CONFIG_IOSCHED_BFQ=y +CONFIG_BFQ_GROUP_IOSCHED=y +CONFIG_BINFMT_MISC=m CONFIG_MEMORY_HOTPLUG=y CONFIG_MEMORY_HOTREMOVE=y CONFIG_KSM=y @@ -82,17 +99,8 @@ CONFIG_ZSMALLOC=m CONFIG_ZSMALLOC_STAT=y CONFIG_DEFERRED_STRUCT_PAGE_INIT=y CONFIG_IDLE_PAGE_TRACKING=y -CONFIG_PCI=y -CONFIG_PCI_DEBUG=y -CONFIG_HOTPLUG_PCI=y -CONFIG_HOTPLUG_PCI_S390=y -CONFIG_CHSC_SCH=y -CONFIG_VFIO_AP=m -CONFIG_VFIO_CCW=m -CONFIG_CRASH_DUMP=y -CONFIG_BINFMT_MISC=m -CONFIG_HIBERNATION=y -CONFIG_PM_DEBUG=y +CONFIG_PERCPU_STATS=y +CONFIG_GUP_BENCHMARK=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_PACKET_DIAG=m @@ -121,9 +129,6 @@ CONFIG_NET_IPVTI=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m CONFIG_INET_DIAG=m CONFIG_INET_UDP_DIAG=m CONFIG_TCP_CONG_ADVANCED=y @@ -139,10 +144,6 @@ CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m CONFIG_IPV6_MIP6=m -CONFIG_INET6_XFRM_MODE_TRANSPORT=m -CONFIG_INET6_XFRM_MODE_TUNNEL=m -CONFIG_INET6_XFRM_MODE_BEET=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m CONFIG_IPV6_VTI=m CONFIG_IPV6_SIT=m CONFIG_IPV6_GRE=m @@ -264,11 +265,8 @@ CONFIG_IP_VS_SED=m CONFIG_IP_VS_NQ=m CONFIG_IP_VS_FTP=m CONFIG_IP_VS_PE_SIP=m -CONFIG_NF_CONNTRACK_IPV4=m CONFIG_NF_TABLES_IPV4=y -CONFIG_NFT_CHAIN_ROUTE_IPV4=m CONFIG_NF_TABLES_ARP=y -CONFIG_NFT_CHAIN_NAT_IPV4=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m @@ -287,10 +285,7 @@ CONFIG_IP_NF_SECURITY=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m -CONFIG_NF_CONNTRACK_IPV6=m CONFIG_NF_TABLES_IPV6=y -CONFIG_NFT_CHAIN_ROUTE_IPV6=m -CONFIG_NFT_CHAIN_NAT_IPV6=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -309,7 +304,7 @@ CONFIG_IP6_NF_RAW=m CONFIG_IP6_NF_SECURITY=m CONFIG_IP6_NF_NAT=m CONFIG_IP6_NF_TARGET_MASQUERADE=m -CONFIG_NF_TABLES_BRIDGE=y +CONFIG_NF_TABLES_BRIDGE=m CONFIG_RDS=m CONFIG_RDS_RDMA=m CONFIG_RDS_TCP=m @@ -375,9 +370,11 @@ CONFIG_NETLINK_DIAG=m CONFIG_CGROUP_NET_PRIO=y CONFIG_BPF_JIT=y CONFIG_NET_PKTGEN=m +CONFIG_PCI=y +CONFIG_PCI_DEBUG=y +CONFIG_HOTPLUG_PCI=y +CONFIG_HOTPLUG_PCI_S390=y CONFIG_DEVTMPFS=y -CONFIG_DMA_CMA=y -CONFIG_CMA_SIZE_MBYTES=0 CONFIG_CONNECTOR=y CONFIG_ZRAM=m CONFIG_BLK_DEV_LOOP=m @@ -395,7 +392,6 @@ CONFIG_RAID_ATTRS=m CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m CONFIG_BLK_DEV_SR=m CONFIG_CHR_DEV_SG=y CONFIG_CHR_DEV_SCH=m @@ -415,17 +411,19 @@ CONFIG_SCSI_DH_RDAC=m CONFIG_SCSI_DH_HP_SW=m CONFIG_SCSI_DH_EMC=m CONFIG_SCSI_DH_ALUA=m -CONFIG_SCSI_OSD_INITIATOR=m -CONFIG_SCSI_OSD_ULD=m CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_LINEAR=m CONFIG_MD_MULTIPATH=m CONFIG_MD_FAULTY=m +CONFIG_MD_CLUSTER=m +CONFIG_BCACHE=m CONFIG_BLK_DEV_DM=m +CONFIG_DM_UNSTRIPED=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_WRITECACHE=m CONFIG_DM_MIRROR=m CONFIG_DM_LOG_USERSPACE=m CONFIG_DM_RAID=m @@ -445,23 +443,78 @@ CONFIG_EQUALIZER=m CONFIG_IFB=m CONFIG_MACVLAN=m CONFIG_MACVTAP=m -CONFIG_VXLAN=m CONFIG_TUN=m CONFIG_VETH=m CONFIG_VIRTIO_NET=m CONFIG_NLMON=m +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_VENDOR_ADAPTEC is not set +# CONFIG_NET_VENDOR_AGERE is not set +# CONFIG_NET_VENDOR_ALACRITECH is not set +# CONFIG_NET_VENDOR_ALTEON is not set +# CONFIG_NET_VENDOR_AMAZON is not set +# CONFIG_NET_VENDOR_AMD is not set +# CONFIG_NET_VENDOR_AQUANTIA is not set # CONFIG_NET_VENDOR_ARC is not set +# CONFIG_NET_VENDOR_ATHEROS is not set +# CONFIG_NET_VENDOR_AURORA is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_BROCADE is not set +# CONFIG_NET_VENDOR_CADENCE is not set +# CONFIG_NET_VENDOR_CAVIUM is not set # CONFIG_NET_VENDOR_CHELSIO is not set +# CONFIG_NET_VENDOR_CISCO is not set +# CONFIG_NET_VENDOR_CORTINA is not set +# CONFIG_NET_VENDOR_DEC is not set +# CONFIG_NET_VENDOR_DLINK is not set +# CONFIG_NET_VENDOR_EMULEX is not set +# CONFIG_NET_VENDOR_EZCHIP is not set +# CONFIG_NET_VENDOR_GOOGLE is not set +# CONFIG_NET_VENDOR_HP is not set +# CONFIG_NET_VENDOR_HUAWEI is not set # CONFIG_NET_VENDOR_INTEL is not set # CONFIG_NET_VENDOR_MARVELL is not set CONFIG_MLX4_EN=m CONFIG_MLX5_CORE=m CONFIG_MLX5_CORE_EN=y +# CONFIG_MLXFW is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_MICROCHIP is not set +# CONFIG_NET_VENDOR_MICROSEMI is not set +# CONFIG_NET_VENDOR_MYRI is not set # CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_NETERION is not set +# CONFIG_NET_VENDOR_NETRONOME is not set +# CONFIG_NET_VENDOR_NI is not set +# CONFIG_NET_VENDOR_NVIDIA is not set +# CONFIG_NET_VENDOR_OKI is not set +# CONFIG_NET_VENDOR_PACKET_ENGINES is not set +# CONFIG_NET_VENDOR_QLOGIC is not set +# CONFIG_NET_VENDOR_QUALCOMM is not set +# CONFIG_NET_VENDOR_RDC is not set +# CONFIG_NET_VENDOR_REALTEK is not set +# CONFIG_NET_VENDOR_RENESAS is not set +# CONFIG_NET_VENDOR_ROCKER is not set +# CONFIG_NET_VENDOR_SAMSUNG is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SOLARFLARE is not set +# CONFIG_NET_VENDOR_SILAN is not set +# CONFIG_NET_VENDOR_SIS is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_SOCIONEXT is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_SUN is not set +# CONFIG_NET_VENDOR_SYNOPSYS is not set +# CONFIG_NET_VENDOR_TEHUTI is not set +# CONFIG_NET_VENDOR_TI is not set +# CONFIG_NET_VENDOR_VIA is not set +# CONFIG_NET_VENDOR_WIZNET is not set CONFIG_PPP=m CONFIG_PPP_BSDCOMP=m CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y CONFIG_PPP_MPPE=m +CONFIG_PPP_MULTILINK=y CONFIG_PPPOE=m CONFIG_PPTP=m CONFIG_PPPOL2TP=m @@ -473,10 +526,13 @@ CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_MOUSE is not set # CONFIG_SERIO is not set CONFIG_LEGACY_PTY_COUNT=0 +CONFIG_NULL_TTY=m CONFIG_HW_RANDOM_VIRTIO=m CONFIG_RAW_DRIVER=m CONFIG_HANGCHECK_TIMER=m CONFIG_TN3270_FS=y +CONFIG_PPS=m +# CONFIG_PTP_1588_CLOCK is not set # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_WATCHDOG_NOWAYOUT=y @@ -498,8 +554,8 @@ CONFIG_VFIO_MDEV_DEVICE=m CONFIG_VIRTIO_PCI=m CONFIG_VIRTIO_BALLOON=m CONFIG_VIRTIO_INPUT=y -CONFIG_S390_AP_IOMMU=y CONFIG_S390_CCW_IOMMU=y +CONFIG_S390_AP_IOMMU=y CONFIG_EXT4_FS=y CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y @@ -519,6 +575,7 @@ CONFIG_OCFS2_FS=m CONFIG_BTRFS_FS=y CONFIG_BTRFS_FS_POSIX_ACL=y CONFIG_BTRFS_DEBUG=y +CONFIG_BTRFS_ASSERT=y CONFIG_NILFS2_FS=m CONFIG_FS_DAX=y CONFIG_EXPORTFS_BLOCK_OPS=y @@ -552,8 +609,10 @@ CONFIG_ECRYPT_FS=m CONFIG_CRAMFS=m CONFIG_SQUASHFS=m CONFIG_SQUASHFS_XATTR=y +CONFIG_SQUASHFS_LZ4=y CONFIG_SQUASHFS_LZO=y CONFIG_SQUASHFS_XZ=y +CONFIG_SQUASHFS_ZSTD=y CONFIG_ROMFS_FS=m CONFIG_NFS_FS=m CONFIG_NFS_V3_ACL=y @@ -564,7 +623,6 @@ CONFIG_NFSD_V3_ACL=y CONFIG_NFSD_V4=y CONFIG_NFSD_V4_SECURITY_LABEL=y CONFIG_CIFS=m -CONFIG_CIFS_STATS=y CONFIG_CIFS_STATS2=y CONFIG_CIFS_WEAK_PW_HASH=y CONFIG_CIFS_UPCALL=y @@ -580,19 +638,112 @@ CONFIG_NLS_ISO8859_1=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_UTF8=m CONFIG_DLM=m +CONFIG_UNICODE=y +CONFIG_PERSISTENT_KEYRINGS=y +CONFIG_BIG_KEYS=y +CONFIG_ENCRYPTED_KEYS=m +CONFIG_SECURITY=y +CONFIG_SECURITY_NETWORK=y +CONFIG_FORTIFY_SOURCE=y +CONFIG_SECURITY_SELINUX=y +CONFIG_SECURITY_SELINUX_BOOTPARAM=y +CONFIG_SECURITY_SELINUX_DISABLE=y +CONFIG_INTEGRITY_SIGNATURE=y +CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y +CONFIG_IMA=y +CONFIG_IMA_DEFAULT_HASH_SHA256=y +CONFIG_IMA_WRITE_POLICY=y +CONFIG_IMA_APPRAISE=y +CONFIG_CRYPTO_USER=m +# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set +CONFIG_CRYPTO_PCRYPT=m +CONFIG_CRYPTO_CRYPTD=m +CONFIG_CRYPTO_TEST=m +CONFIG_CRYPTO_DH=m +CONFIG_CRYPTO_ECDH=m +CONFIG_CRYPTO_ECRDSA=m +CONFIG_CRYPTO_CHACHA20POLY1305=m +CONFIG_CRYPTO_AEGIS128=m +CONFIG_CRYPTO_AEGIS128L=m +CONFIG_CRYPTO_AEGIS256=m +CONFIG_CRYPTO_MORUS640=m +CONFIG_CRYPTO_MORUS1280=m +CONFIG_CRYPTO_CFB=m +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_KEYWRAP=m +CONFIG_CRYPTO_ADIANTUM=m +CONFIG_CRYPTO_XCBC=m +CONFIG_CRYPTO_VMAC=m +CONFIG_CRYPTO_CRC32=m +CONFIG_CRYPTO_XXHASH=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m +CONFIG_CRYPTO_SHA3=m +CONFIG_CRYPTO_SM3=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_AES_TI=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_SALSA20=m +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_SM4=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_842=m +CONFIG_CRYPTO_LZ4=m +CONFIG_CRYPTO_LZ4HC=m +CONFIG_CRYPTO_ZSTD=m +CONFIG_CRYPTO_ANSI_CPRNG=m +CONFIG_CRYPTO_USER_API_HASH=m +CONFIG_CRYPTO_USER_API_SKCIPHER=m +CONFIG_CRYPTO_USER_API_RNG=m +CONFIG_CRYPTO_USER_API_AEAD=m +CONFIG_CRYPTO_STATS=y +CONFIG_ZCRYPT=m +CONFIG_PKEY=m +CONFIG_CRYPTO_PAES_S390=m +CONFIG_CRYPTO_SHA1_S390=m +CONFIG_CRYPTO_SHA256_S390=m +CONFIG_CRYPTO_SHA512_S390=m +CONFIG_CRYPTO_DES_S390=m +CONFIG_CRYPTO_AES_S390=m +CONFIG_CRYPTO_GHASH_S390=m +CONFIG_CRYPTO_CRC32_S390=y +CONFIG_CORDIC=m +CONFIG_CRC32_SELFTEST=y +CONFIG_CRC4=m +CONFIG_CRC7=m +CONFIG_CRC8=m +CONFIG_RANDOM32_SELFTEST=y +CONFIG_DMA_CMA=y +CONFIG_CMA_SIZE_MBYTES=0 +CONFIG_DMA_API_DEBUG=y +CONFIG_STRING_SELFTEST=y CONFIG_PRINTK_TIME=y CONFIG_DYNAMIC_DEBUG=y CONFIG_DEBUG_INFO=y CONFIG_DEBUG_INFO_DWARF4=y CONFIG_GDB_SCRIPTS=y CONFIG_FRAME_WARN=1024 -CONFIG_READABLE_ASM=y CONFIG_UNUSED_SYMBOLS=y CONFIG_HEADERS_INSTALL=y CONFIG_HEADERS_CHECK=y CONFIG_DEBUG_SECTION_MISMATCH=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_PAGEALLOC=y +CONFIG_PAGE_OWNER=y CONFIG_DEBUG_RODATA_TEST=y CONFIG_DEBUG_OBJECTS=y CONFIG_DEBUG_OBJECTS_SELFTEST=y @@ -645,7 +796,6 @@ CONFIG_STACK_TRACER=y CONFIG_BLK_DEV_IO_TRACE=y CONFIG_FUNCTION_PROFILER=y CONFIG_HIST_TRIGGERS=y -CONFIG_DMA_API_DEBUG=y CONFIG_LKDTM=m CONFIG_TEST_LIST_SORT=y CONFIG_TEST_SORT=y @@ -657,85 +807,3 @@ CONFIG_ATOMIC64_SELFTEST=y CONFIG_TEST_BPF=m CONFIG_BUG_ON_DATA_CORRUPTION=y CONFIG_S390_PTDUMP=y -CONFIG_PERSISTENT_KEYRINGS=y -CONFIG_BIG_KEYS=y -CONFIG_ENCRYPTED_KEYS=m -CONFIG_SECURITY=y -CONFIG_SECURITY_NETWORK=y -CONFIG_FORTIFY_SOURCE=y -CONFIG_SECURITY_SELINUX=y -CONFIG_SECURITY_SELINUX_BOOTPARAM=y -CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0 -CONFIG_SECURITY_SELINUX_DISABLE=y -CONFIG_INTEGRITY_SIGNATURE=y -CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y -CONFIG_IMA=y -CONFIG_IMA_DEFAULT_HASH_SHA256=y -CONFIG_IMA_WRITE_POLICY=y -CONFIG_IMA_APPRAISE=y -CONFIG_CRYPTO_DH=m -CONFIG_CRYPTO_ECDH=m -CONFIG_CRYPTO_USER=m -# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set -CONFIG_CRYPTO_PCRYPT=m -CONFIG_CRYPTO_CRYPTD=m -CONFIG_CRYPTO_TEST=m -CONFIG_CRYPTO_CHACHA20POLY1305=m -CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_KEYWRAP=m -CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_VMAC=m -CONFIG_CRYPTO_CRC32=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_RMD128=m -CONFIG_CRYPTO_RMD160=m -CONFIG_CRYPTO_RMD256=m -CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_SHA3=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_AES_TI=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_CAMELLIA=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_SALSA20=m -CONFIG_CRYPTO_SEED=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_842=m -CONFIG_CRYPTO_LZ4=m -CONFIG_CRYPTO_LZ4HC=m -CONFIG_CRYPTO_ANSI_CPRNG=m -CONFIG_CRYPTO_USER_API_HASH=m -CONFIG_CRYPTO_USER_API_SKCIPHER=m -CONFIG_CRYPTO_USER_API_RNG=m -CONFIG_CRYPTO_USER_API_AEAD=m -CONFIG_ZCRYPT=m -CONFIG_PKEY=m -CONFIG_CRYPTO_PAES_S390=m -CONFIG_CRYPTO_SHA1_S390=m -CONFIG_CRYPTO_SHA256_S390=m -CONFIG_CRYPTO_SHA512_S390=m -CONFIG_CRYPTO_DES_S390=m -CONFIG_CRYPTO_AES_S390=m -CONFIG_CRYPTO_GHASH_S390=m -CONFIG_CRYPTO_CRC32_S390=y -CONFIG_PKCS7_MESSAGE_PARSER=y -CONFIG_SYSTEM_TRUSTED_KEYRING=y -CONFIG_CRC7=m -CONFIG_CRC8=m -CONFIG_RANDOM32_SELFTEST=y -CONFIG_CORDIC=m -CONFIG_CMM=m -CONFIG_APPLDATA_BASE=y -CONFIG_KVM=m -CONFIG_KVM_S390_UCONTROL=y -CONFIG_VHOST_NET=m -CONFIG_VHOST_VSOCK=m diff --git a/arch/s390/configs/defconfig b/arch/s390/configs/defconfig index e4bc40073003..68d3ca83302b 100644 --- a/arch/s390/configs/defconfig +++ b/arch/s390/configs/defconfig @@ -12,30 +12,51 @@ CONFIG_TASK_IO_ACCOUNTING=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_NUMA_BALANCING=y -# CONFIG_NUMA_BALANCING_DEFAULT_ENABLED is not set CONFIG_MEMCG=y CONFIG_MEMCG_SWAP=y CONFIG_BLK_CGROUP=y CONFIG_CFS_BANDWIDTH=y CONFIG_RT_GROUP_SCHED=y CONFIG_CGROUP_PIDS=y +CONFIG_CGROUP_RDMA=y CONFIG_CGROUP_FREEZER=y CONFIG_CGROUP_HUGETLB=y CONFIG_CPUSETS=y CONFIG_CGROUP_DEVICE=y CONFIG_CGROUP_CPUACCT=y CONFIG_CGROUP_PERF=y +CONFIG_CGROUP_BPF=y CONFIG_NAMESPACES=y CONFIG_USER_NS=y +CONFIG_CHECKPOINT_RESTORE=y CONFIG_SCHED_AUTOGROUP=y CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y # CONFIG_SYSFS_SYSCALL is not set -CONFIG_CHECKPOINT_RESTORE=y CONFIG_BPF_SYSCALL=y CONFIG_USERFAULTFD=y # CONFIG_COMPAT_BRK is not set CONFIG_PROFILING=y +CONFIG_LIVEPATCH=y +CONFIG_TUNE_ZEC12=y +CONFIG_NR_CPUS=512 +CONFIG_NUMA=y +# CONFIG_NUMA_EMU is not set +CONFIG_HZ_100=y +CONFIG_KEXEC_FILE=y +CONFIG_EXPOLINE=y +CONFIG_EXPOLINE_AUTO=y +CONFIG_CHSC_SCH=y +CONFIG_VFIO_CCW=m +CONFIG_VFIO_AP=m +CONFIG_CRASH_DUMP=y +CONFIG_HIBERNATION=y +CONFIG_PM_DEBUG=y +CONFIG_CMM=m +CONFIG_APPLDATA_BASE=y +CONFIG_KVM=m +CONFIG_VHOST_NET=m +CONFIG_VHOST_VSOCK=m CONFIG_OPROFILE=m CONFIG_KPROBES=y CONFIG_JUMP_LABEL=y @@ -47,27 +68,18 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_MODULE_SIG=y CONFIG_MODULE_SIG_SHA256=y -CONFIG_BLK_DEV_INTEGRITY=y CONFIG_BLK_DEV_THROTTLING=y CONFIG_BLK_WBT=y -CONFIG_BLK_WBT_SQ=y +CONFIG_BLK_CGROUP_IOLATENCY=y CONFIG_PARTITION_ADVANCED=y CONFIG_IBM_PARTITION=y CONFIG_BSD_DISKLABEL=y CONFIG_MINIX_SUBPARTITION=y CONFIG_SOLARIS_X86_PARTITION=y CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_CFQ_GROUP_IOSCHED=y -CONFIG_DEFAULT_DEADLINE=y -CONFIG_LIVEPATCH=y -CONFIG_TUNE_ZEC12=y -CONFIG_NR_CPUS=512 -CONFIG_NUMA=y -CONFIG_HZ_100=y -CONFIG_KEXEC_FILE=y -CONFIG_KEXEC_VERIFY_SIG=y -CONFIG_EXPOLINE=y -CONFIG_EXPOLINE_AUTO=y +CONFIG_IOSCHED_BFQ=y +CONFIG_BFQ_GROUP_IOSCHED=y +CONFIG_BINFMT_MISC=m CONFIG_MEMORY_HOTPLUG=y CONFIG_MEMORY_HOTREMOVE=y CONFIG_KSM=y @@ -81,16 +93,8 @@ CONFIG_ZSMALLOC=m CONFIG_ZSMALLOC_STAT=y CONFIG_DEFERRED_STRUCT_PAGE_INIT=y CONFIG_IDLE_PAGE_TRACKING=y -CONFIG_PCI=y -CONFIG_HOTPLUG_PCI=y -CONFIG_HOTPLUG_PCI_S390=y -CONFIG_CHSC_SCH=y -CONFIG_VFIO_AP=m -CONFIG_VFIO_CCW=m -CONFIG_CRASH_DUMP=y -CONFIG_BINFMT_MISC=m -CONFIG_HIBERNATION=y -CONFIG_PM_DEBUG=y +CONFIG_PERCPU_STATS=y +CONFIG_GUP_BENCHMARK=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_PACKET_DIAG=m @@ -119,9 +123,6 @@ CONFIG_NET_IPVTI=m CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m CONFIG_INET_DIAG=m CONFIG_INET_UDP_DIAG=m CONFIG_TCP_CONG_ADVANCED=y @@ -137,10 +138,6 @@ CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m CONFIG_IPV6_MIP6=m -CONFIG_INET6_XFRM_MODE_TRANSPORT=m -CONFIG_INET6_XFRM_MODE_TUNNEL=m -CONFIG_INET6_XFRM_MODE_BEET=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m CONFIG_IPV6_VTI=m CONFIG_IPV6_SIT=m CONFIG_IPV6_GRE=m @@ -262,11 +259,8 @@ CONFIG_IP_VS_SED=m CONFIG_IP_VS_NQ=m CONFIG_IP_VS_FTP=m CONFIG_IP_VS_PE_SIP=m -CONFIG_NF_CONNTRACK_IPV4=m CONFIG_NF_TABLES_IPV4=y -CONFIG_NFT_CHAIN_ROUTE_IPV4=m CONFIG_NF_TABLES_ARP=y -CONFIG_NFT_CHAIN_NAT_IPV4=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m @@ -285,10 +279,7 @@ CONFIG_IP_NF_SECURITY=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m -CONFIG_NF_CONNTRACK_IPV6=m CONFIG_NF_TABLES_IPV6=y -CONFIG_NFT_CHAIN_ROUTE_IPV6=m -CONFIG_NFT_CHAIN_NAT_IPV6=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -307,7 +298,7 @@ CONFIG_IP6_NF_RAW=m CONFIG_IP6_NF_SECURITY=m CONFIG_IP6_NF_NAT=m CONFIG_IP6_NF_TARGET_MASQUERADE=m -CONFIG_NF_TABLES_BRIDGE=y +CONFIG_NF_TABLES_BRIDGE=m CONFIG_RDS=m CONFIG_RDS_RDMA=m CONFIG_RDS_TCP=m @@ -372,9 +363,11 @@ CONFIG_NETLINK_DIAG=m CONFIG_CGROUP_NET_PRIO=y CONFIG_BPF_JIT=y CONFIG_NET_PKTGEN=m +CONFIG_PCI=y +CONFIG_HOTPLUG_PCI=y +CONFIG_HOTPLUG_PCI_S390=y +CONFIG_UEVENT_HELPER=y CONFIG_DEVTMPFS=y -CONFIG_DMA_CMA=y -CONFIG_CMA_SIZE_MBYTES=0 CONFIG_CONNECTOR=y CONFIG_ZRAM=m CONFIG_BLK_DEV_LOOP=m @@ -383,6 +376,7 @@ CONFIG_BLK_DEV_DRBD=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=32768 +# CONFIG_BLK_DEV_XPRAM is not set CONFIG_VIRTIO_BLK=y CONFIG_BLK_DEV_RBD=m CONFIG_BLK_DEV_NVME=m @@ -392,7 +386,6 @@ CONFIG_RAID_ATTRS=m CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m CONFIG_BLK_DEV_SR=m CONFIG_CHR_DEV_SG=y CONFIG_CHR_DEV_SCH=m @@ -412,17 +405,19 @@ CONFIG_SCSI_DH_RDAC=m CONFIG_SCSI_DH_HP_SW=m CONFIG_SCSI_DH_EMC=m CONFIG_SCSI_DH_ALUA=m -CONFIG_SCSI_OSD_INITIATOR=m -CONFIG_SCSI_OSD_ULD=m CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_LINEAR=m CONFIG_MD_MULTIPATH=m CONFIG_MD_FAULTY=m +CONFIG_MD_CLUSTER=m +CONFIG_BCACHE=m CONFIG_BLK_DEV_DM=m +CONFIG_DM_UNSTRIPED=m CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_WRITECACHE=m CONFIG_DM_MIRROR=m CONFIG_DM_LOG_USERSPACE=m CONFIG_DM_RAID=m @@ -435,6 +430,7 @@ CONFIG_DM_UEVENT=y CONFIG_DM_FLAKEY=m CONFIG_DM_VERITY=m CONFIG_DM_SWITCH=m +CONFIG_DM_INTEGRITY=m CONFIG_NETDEVICES=y CONFIG_BONDING=m CONFIG_DUMMY=m @@ -442,23 +438,78 @@ CONFIG_EQUALIZER=m CONFIG_IFB=m CONFIG_MACVLAN=m CONFIG_MACVTAP=m -CONFIG_VXLAN=m CONFIG_TUN=m CONFIG_VETH=m CONFIG_VIRTIO_NET=m CONFIG_NLMON=m +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_VENDOR_ADAPTEC is not set +# CONFIG_NET_VENDOR_AGERE is not set +# CONFIG_NET_VENDOR_ALACRITECH is not set +# CONFIG_NET_VENDOR_ALTEON is not set +# CONFIG_NET_VENDOR_AMAZON is not set +# CONFIG_NET_VENDOR_AMD is not set +# CONFIG_NET_VENDOR_AQUANTIA is not set # CONFIG_NET_VENDOR_ARC is not set +# CONFIG_NET_VENDOR_ATHEROS is not set +# CONFIG_NET_VENDOR_AURORA is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_BROCADE is not set +# CONFIG_NET_VENDOR_CADENCE is not set +# CONFIG_NET_VENDOR_CAVIUM is not set # CONFIG_NET_VENDOR_CHELSIO is not set +# CONFIG_NET_VENDOR_CISCO is not set +# CONFIG_NET_VENDOR_CORTINA is not set +# CONFIG_NET_VENDOR_DEC is not set +# CONFIG_NET_VENDOR_DLINK is not set +# CONFIG_NET_VENDOR_EMULEX is not set +# CONFIG_NET_VENDOR_EZCHIP is not set +# CONFIG_NET_VENDOR_GOOGLE is not set +# CONFIG_NET_VENDOR_HP is not set +# CONFIG_NET_VENDOR_HUAWEI is not set # CONFIG_NET_VENDOR_INTEL is not set # CONFIG_NET_VENDOR_MARVELL is not set CONFIG_MLX4_EN=m CONFIG_MLX5_CORE=m CONFIG_MLX5_CORE_EN=y +# CONFIG_MLXFW is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_MICROCHIP is not set +# CONFIG_NET_VENDOR_MICROSEMI is not set +# CONFIG_NET_VENDOR_MYRI is not set # CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_NETERION is not set +# CONFIG_NET_VENDOR_NETRONOME is not set +# CONFIG_NET_VENDOR_NI is not set +# CONFIG_NET_VENDOR_NVIDIA is not set +# CONFIG_NET_VENDOR_OKI is not set +# CONFIG_NET_VENDOR_PACKET_ENGINES is not set +# CONFIG_NET_VENDOR_QLOGIC is not set +# CONFIG_NET_VENDOR_QUALCOMM is not set +# CONFIG_NET_VENDOR_RDC is not set +# CONFIG_NET_VENDOR_REALTEK is not set +# CONFIG_NET_VENDOR_RENESAS is not set +# CONFIG_NET_VENDOR_ROCKER is not set +# CONFIG_NET_VENDOR_SAMSUNG is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SOLARFLARE is not set +# CONFIG_NET_VENDOR_SILAN is not set +# CONFIG_NET_VENDOR_SIS is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_SOCIONEXT is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_SUN is not set +# CONFIG_NET_VENDOR_SYNOPSYS is not set +# CONFIG_NET_VENDOR_TEHUTI is not set +# CONFIG_NET_VENDOR_TI is not set +# CONFIG_NET_VENDOR_VIA is not set +# CONFIG_NET_VENDOR_WIZNET is not set CONFIG_PPP=m CONFIG_PPP_BSDCOMP=m CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y CONFIG_PPP_MPPE=m +CONFIG_PPP_MULTILINK=y CONFIG_PPPOE=m CONFIG_PPTP=m CONFIG_PPPOL2TP=m @@ -470,17 +521,21 @@ CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_MOUSE is not set # CONFIG_SERIO is not set CONFIG_LEGACY_PTY_COUNT=0 +CONFIG_NULL_TTY=m CONFIG_HW_RANDOM_VIRTIO=m CONFIG_RAW_DRIVER=m CONFIG_HANGCHECK_TIMER=m CONFIG_TN3270_FS=y +# CONFIG_PTP_1588_CLOCK is not set # CONFIG_HWMON is not set CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_CORE=y CONFIG_WATCHDOG_NOWAYOUT=y CONFIG_SOFT_WATCHDOG=m CONFIG_DIAG288_WATCHDOG=m CONFIG_DRM=y CONFIG_DRM_VIRTIO_GPU=y +# CONFIG_BACKLIGHT_CLASS_DEVICE is not set CONFIG_FRAMEBUFFER_CONSOLE=y # CONFIG_HID is not set # CONFIG_USB_SUPPORT is not set @@ -495,8 +550,8 @@ CONFIG_VFIO_MDEV_DEVICE=m CONFIG_VIRTIO_PCI=m CONFIG_VIRTIO_BALLOON=m CONFIG_VIRTIO_INPUT=y -CONFIG_S390_AP_IOMMU=y CONFIG_S390_CCW_IOMMU=y +CONFIG_S390_AP_IOMMU=y CONFIG_EXT4_FS=y CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y @@ -546,8 +601,10 @@ CONFIG_ECRYPT_FS=m CONFIG_CRAMFS=m CONFIG_SQUASHFS=m CONFIG_SQUASHFS_XATTR=y +CONFIG_SQUASHFS_LZ4=y CONFIG_SQUASHFS_LZO=y CONFIG_SQUASHFS_XZ=y +CONFIG_SQUASHFS_ZSTD=y CONFIG_ROMFS_FS=m CONFIG_NFS_FS=m CONFIG_NFS_V3_ACL=y @@ -558,7 +615,6 @@ CONFIG_NFSD_V3_ACL=y CONFIG_NFSD_V4=y CONFIG_NFSD_V4_SECURITY_LABEL=y CONFIG_CIFS=m -CONFIG_CIFS_STATS=y CONFIG_CIFS_STATS2=y CONFIG_CIFS_WEAK_PW_HASH=y CONFIG_CIFS_UPCALL=y @@ -574,31 +630,7 @@ CONFIG_NLS_ISO8859_1=m CONFIG_NLS_ISO8859_15=m CONFIG_NLS_UTF8=m CONFIG_DLM=m -CONFIG_PRINTK_TIME=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_INFO_DWARF4=y -CONFIG_GDB_SCRIPTS=y -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_FRAME_WARN=1024 -CONFIG_UNUSED_SYMBOLS=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_MEMORY_INIT=y -CONFIG_PANIC_ON_OOPS=y -CONFIG_RCU_TORTURE_TEST=m -CONFIG_RCU_CPU_STALL_TIMEOUT=60 -CONFIG_LATENCYTOP=y -CONFIG_SCHED_TRACER=y -CONFIG_FTRACE_SYSCALLS=y -CONFIG_STACK_TRACER=y -CONFIG_BLK_DEV_IO_TRACE=y -CONFIG_FUNCTION_PROFILER=y -CONFIG_HIST_TRIGGERS=y -CONFIG_LKDTM=m -CONFIG_PERCPU_TEST=m -CONFIG_ATOMIC64_SELFTEST=y -CONFIG_TEST_BPF=m -CONFIG_BUG_ON_DATA_CORRUPTION=y -CONFIG_S390_PTDUMP=y +CONFIG_UNICODE=y CONFIG_PERSISTENT_KEYRINGS=y CONFIG_BIG_KEYS=y CONFIG_ENCRYPTED_KEYS=m @@ -606,7 +638,6 @@ CONFIG_SECURITY=y CONFIG_SECURITY_NETWORK=y CONFIG_SECURITY_SELINUX=y CONFIG_SECURITY_SELINUX_BOOTPARAM=y -CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0 CONFIG_SECURITY_SELINUX_DISABLE=y CONFIG_INTEGRITY_SIGNATURE=y CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y @@ -615,31 +646,42 @@ CONFIG_IMA_DEFAULT_HASH_SHA256=y CONFIG_IMA_WRITE_POLICY=y CONFIG_IMA_APPRAISE=y CONFIG_CRYPTO_FIPS=y -CONFIG_CRYPTO_DH=m -CONFIG_CRYPTO_ECDH=m CONFIG_CRYPTO_USER=m # CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set CONFIG_CRYPTO_PCRYPT=m CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_TEST=m +CONFIG_CRYPTO_DH=m +CONFIG_CRYPTO_ECDH=m +CONFIG_CRYPTO_ECRDSA=m CONFIG_CRYPTO_CHACHA20POLY1305=m +CONFIG_CRYPTO_AEGIS128=m +CONFIG_CRYPTO_AEGIS128L=m +CONFIG_CRYPTO_AEGIS256=m +CONFIG_CRYPTO_MORUS640=m +CONFIG_CRYPTO_MORUS1280=m +CONFIG_CRYPTO_CFB=m CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_OFB=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_KEYWRAP=m +CONFIG_CRYPTO_ADIANTUM=m CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_CRC32=m +CONFIG_CRYPTO_XXHASH=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_SHA3=m +CONFIG_CRYPTO_SM3=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_AES_TI=m CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_CAMELLIA=m CONFIG_CRYPTO_CAST5=m @@ -649,16 +691,19 @@ CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_SALSA20=m CONFIG_CRYPTO_SEED=m CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_SM4=m CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_TWOFISH=m CONFIG_CRYPTO_842=m CONFIG_CRYPTO_LZ4=m CONFIG_CRYPTO_LZ4HC=m +CONFIG_CRYPTO_ZSTD=m CONFIG_CRYPTO_ANSI_CPRNG=m CONFIG_CRYPTO_USER_API_HASH=m CONFIG_CRYPTO_USER_API_SKCIPHER=m CONFIG_CRYPTO_USER_API_RNG=m CONFIG_CRYPTO_USER_API_AEAD=m +CONFIG_CRYPTO_STATS=y CONFIG_ZCRYPT=m CONFIG_PKEY=m CONFIG_CRYPTO_PAES_S390=m @@ -669,12 +714,34 @@ CONFIG_CRYPTO_DES_S390=m CONFIG_CRYPTO_AES_S390=m CONFIG_CRYPTO_GHASH_S390=m CONFIG_CRYPTO_CRC32_S390=y +CONFIG_CORDIC=m +CONFIG_CRC4=m CONFIG_CRC7=m CONFIG_CRC8=m -CONFIG_CORDIC=m -CONFIG_CMM=m -CONFIG_APPLDATA_BASE=y -CONFIG_KVM=m -CONFIG_KVM_S390_UCONTROL=y -CONFIG_VHOST_NET=m -CONFIG_VHOST_VSOCK=m +CONFIG_DMA_CMA=y +CONFIG_CMA_SIZE_MBYTES=0 +CONFIG_PRINTK_TIME=y +CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_INFO_DWARF4=y +CONFIG_GDB_SCRIPTS=y +CONFIG_FRAME_WARN=1024 +CONFIG_UNUSED_SYMBOLS=y +CONFIG_DEBUG_SECTION_MISMATCH=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_MEMORY_INIT=y +CONFIG_PANIC_ON_OOPS=y +CONFIG_RCU_TORTURE_TEST=m +CONFIG_RCU_CPU_STALL_TIMEOUT=60 +CONFIG_LATENCYTOP=y +CONFIG_SCHED_TRACER=y +CONFIG_FTRACE_SYSCALLS=y +CONFIG_STACK_TRACER=y +CONFIG_BLK_DEV_IO_TRACE=y +CONFIG_FUNCTION_PROFILER=y +CONFIG_HIST_TRIGGERS=y +CONFIG_LKDTM=m +CONFIG_PERCPU_TEST=m +CONFIG_ATOMIC64_SELFTEST=y +CONFIG_TEST_BPF=m +CONFIG_BUG_ON_DATA_CORRUPTION=y +CONFIG_S390_PTDUMP=y diff --git a/arch/s390/configs/zfcpdump_defconfig b/arch/s390/configs/zfcpdump_defconfig index d92bab844b73..be09a208b608 100644 --- a/arch/s390/configs/zfcpdump_defconfig +++ b/arch/s390/configs/zfcpdump_defconfig @@ -1,27 +1,33 @@ # CONFIG_SWAP is not set CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y +# CONFIG_CPU_ISOLATION is not set +# CONFIG_UTS_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_COMPAT_BRK is not set -CONFIG_PARTITION_ADVANCED=y -CONFIG_IBM_PARTITION=y -CONFIG_DEFAULT_DEADLINE=y CONFIG_TUNE_ZEC12=y # CONFIG_COMPAT is not set CONFIG_NR_CPUS=2 -# CONFIG_HOTPLUG_CPU is not set CONFIG_HZ_100=y # CONFIG_ARCH_RANDOM is not set -# CONFIG_COMPACTION is not set -# CONFIG_MIGRATION is not set -# CONFIG_BOUNCE is not set -# CONFIG_CHECK_STACK is not set +# CONFIG_RELOCATABLE is not set # CONFIG_CHSC_SCH is not set # CONFIG_SCM_BUS is not set CONFIG_CRASH_DUMP=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_SECCOMP is not set +# CONFIG_PFAULT is not set +# CONFIG_S390_HYPFS_FS is not set +# CONFIG_VIRTUALIZATION is not set +# CONFIG_S390_GUEST is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_IBM_PARTITION=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_COMPACTION is not set +# CONFIG_MIGRATION is not set +# CONFIG_BOUNCE is not set CONFIG_NET=y # CONFIG_IUCV is not set CONFIG_DEVTMPFS=y @@ -43,7 +49,6 @@ CONFIG_ZFCP=y # CONFIG_HVC_IUCV is not set # CONFIG_HW_RANDOM_S390 is not set CONFIG_RAW_DRIVER=y -# CONFIG_SCLP_ASYNC is not set # CONFIG_HMC_DRV is not set # CONFIG_S390_TAPE is not set # CONFIG_VMCP is not set @@ -56,6 +61,7 @@ CONFIG_RAW_DRIVER=y CONFIG_CONFIGFS_FS=y # CONFIG_MISC_FILESYSTEMS is not set # CONFIG_NETWORK_FILESYSTEMS is not set +# CONFIG_DIMLIB is not set CONFIG_PRINTK_TIME=y CONFIG_DEBUG_INFO=y CONFIG_DEBUG_FS=y @@ -64,7 +70,4 @@ CONFIG_PANIC_ON_OOPS=y # CONFIG_SCHED_DEBUG is not set CONFIG_RCU_CPU_STALL_TIMEOUT=60 # CONFIG_FTRACE is not set -# CONFIG_PFAULT is not set -# CONFIG_S390_HYPFS_FS is not set -# CONFIG_VIRTUALIZATION is not set -# CONFIG_S390_GUEST is not set +# CONFIG_RUNTIME_TESTING_MENU is not set diff --git a/arch/s390/hypfs/hypfs_vm.c b/arch/s390/hypfs/hypfs_vm.c index 42f2375c203e..e1fcc03159ef 100644 --- a/arch/s390/hypfs/hypfs_vm.c +++ b/arch/s390/hypfs/hypfs_vm.c @@ -118,7 +118,7 @@ do { \ return PTR_ERR(rc); \ } while(0) -static int hpyfs_vm_create_guest(struct dentry *systems_dir, +static int hypfs_vm_create_guest(struct dentry *systems_dir, struct diag2fc_data *data) { char guest_name[NAME_LEN + 1] = {}; @@ -219,7 +219,7 @@ int hypfs_vm_create_files(struct dentry *root) } for (i = 0; i < count; i++) { - rc = hpyfs_vm_create_guest(dir, &(data[i])); + rc = hypfs_vm_create_guest(dir, &(data[i])); if (rc) goto failed; } diff --git a/arch/s390/include/asm/bitops.h b/arch/s390/include/asm/bitops.h index 9900d655014c..b8833ac983fa 100644 --- a/arch/s390/include/asm/bitops.h +++ b/arch/s390/include/asm/bitops.h @@ -35,6 +35,7 @@ #include <linux/typecheck.h> #include <linux/compiler.h> +#include <linux/types.h> #include <asm/atomic_ops.h> #include <asm/barrier.h> @@ -55,7 +56,7 @@ __bitops_byte(unsigned long nr, volatile unsigned long *ptr) return ((unsigned char *)ptr) + ((nr ^ (BITS_PER_LONG - 8)) >> 3); } -static inline void set_bit(unsigned long nr, volatile unsigned long *ptr) +static inline void arch_set_bit(unsigned long nr, volatile unsigned long *ptr) { unsigned long *addr = __bitops_word(nr, ptr); unsigned long mask; @@ -76,7 +77,7 @@ static inline void set_bit(unsigned long nr, volatile unsigned long *ptr) __atomic64_or(mask, (long *)addr); } -static inline void clear_bit(unsigned long nr, volatile unsigned long *ptr) +static inline void arch_clear_bit(unsigned long nr, volatile unsigned long *ptr) { unsigned long *addr = __bitops_word(nr, ptr); unsigned long mask; @@ -97,7 +98,8 @@ static inline void clear_bit(unsigned long nr, volatile unsigned long *ptr) __atomic64_and(mask, (long *)addr); } -static inline void change_bit(unsigned long nr, volatile unsigned long *ptr) +static inline void arch_change_bit(unsigned long nr, + volatile unsigned long *ptr) { unsigned long *addr = __bitops_word(nr, ptr); unsigned long mask; @@ -118,8 +120,8 @@ static inline void change_bit(unsigned long nr, volatile unsigned long *ptr) __atomic64_xor(mask, (long *)addr); } -static inline int -test_and_set_bit(unsigned long nr, volatile unsigned long *ptr) +static inline bool arch_test_and_set_bit(unsigned long nr, + volatile unsigned long *ptr) { unsigned long *addr = __bitops_word(nr, ptr); unsigned long old, mask; @@ -129,8 +131,8 @@ test_and_set_bit(unsigned long nr, volatile unsigned long *ptr) return (old & mask) != 0; } -static inline int -test_and_clear_bit(unsigned long nr, volatile unsigned long *ptr) +static inline bool arch_test_and_clear_bit(unsigned long nr, + volatile unsigned long *ptr) { unsigned long *addr = __bitops_word(nr, ptr); unsigned long old, mask; @@ -140,8 +142,8 @@ test_and_clear_bit(unsigned long nr, volatile unsigned long *ptr) return (old & ~mask) != 0; } -static inline int -test_and_change_bit(unsigned long nr, volatile unsigned long *ptr) +static inline bool arch_test_and_change_bit(unsigned long nr, + volatile unsigned long *ptr) { unsigned long *addr = __bitops_word(nr, ptr); unsigned long old, mask; @@ -151,30 +153,31 @@ test_and_change_bit(unsigned long nr, volatile unsigned long *ptr) return (old & mask) != 0; } -static inline void __set_bit(unsigned long nr, volatile unsigned long *ptr) +static inline void arch___set_bit(unsigned long nr, volatile unsigned long *ptr) { unsigned char *addr = __bitops_byte(nr, ptr); *addr |= 1 << (nr & 7); } -static inline void -__clear_bit(unsigned long nr, volatile unsigned long *ptr) +static inline void arch___clear_bit(unsigned long nr, + volatile unsigned long *ptr) { unsigned char *addr = __bitops_byte(nr, ptr); *addr &= ~(1 << (nr & 7)); } -static inline void __change_bit(unsigned long nr, volatile unsigned long *ptr) +static inline void arch___change_bit(unsigned long nr, + volatile unsigned long *ptr) { unsigned char *addr = __bitops_byte(nr, ptr); *addr ^= 1 << (nr & 7); } -static inline int -__test_and_set_bit(unsigned long nr, volatile unsigned long *ptr) +static inline bool arch___test_and_set_bit(unsigned long nr, + volatile unsigned long *ptr) { unsigned char *addr = __bitops_byte(nr, ptr); unsigned char ch; @@ -184,8 +187,8 @@ __test_and_set_bit(unsigned long nr, volatile unsigned long *ptr) return (ch >> (nr & 7)) & 1; } -static inline int -__test_and_clear_bit(unsigned long nr, volatile unsigned long *ptr) +static inline bool arch___test_and_clear_bit(unsigned long nr, + volatile unsigned long *ptr) { unsigned char *addr = __bitops_byte(nr, ptr); unsigned char ch; @@ -195,8 +198,8 @@ __test_and_clear_bit(unsigned long nr, volatile unsigned long *ptr) return (ch >> (nr & 7)) & 1; } -static inline int -__test_and_change_bit(unsigned long nr, volatile unsigned long *ptr) +static inline bool arch___test_and_change_bit(unsigned long nr, + volatile unsigned long *ptr) { unsigned char *addr = __bitops_byte(nr, ptr); unsigned char ch; @@ -206,7 +209,8 @@ __test_and_change_bit(unsigned long nr, volatile unsigned long *ptr) return (ch >> (nr & 7)) & 1; } -static inline int test_bit(unsigned long nr, const volatile unsigned long *ptr) +static inline bool arch_test_bit(unsigned long nr, + const volatile unsigned long *ptr) { const volatile unsigned char *addr; @@ -215,28 +219,30 @@ static inline int test_bit(unsigned long nr, const volatile unsigned long *ptr) return (*addr >> (nr & 7)) & 1; } -static inline int test_and_set_bit_lock(unsigned long nr, - volatile unsigned long *ptr) +static inline bool arch_test_and_set_bit_lock(unsigned long nr, + volatile unsigned long *ptr) { - if (test_bit(nr, ptr)) + if (arch_test_bit(nr, ptr)) return 1; - return test_and_set_bit(nr, ptr); + return arch_test_and_set_bit(nr, ptr); } -static inline void clear_bit_unlock(unsigned long nr, - volatile unsigned long *ptr) +static inline void arch_clear_bit_unlock(unsigned long nr, + volatile unsigned long *ptr) { smp_mb__before_atomic(); - clear_bit(nr, ptr); + arch_clear_bit(nr, ptr); } -static inline void __clear_bit_unlock(unsigned long nr, - volatile unsigned long *ptr) +static inline void arch___clear_bit_unlock(unsigned long nr, + volatile unsigned long *ptr) { smp_mb(); - __clear_bit(nr, ptr); + arch___clear_bit(nr, ptr); } +#include <asm-generic/bitops-instrumented.h> + /* * Functions which use MSB0 bit numbering. * The bits are numbered: @@ -261,7 +267,8 @@ static inline void clear_bit_inv(unsigned long nr, volatile unsigned long *ptr) return clear_bit(nr ^ (BITS_PER_LONG - 1), ptr); } -static inline int test_and_clear_bit_inv(unsigned long nr, volatile unsigned long *ptr) +static inline bool test_and_clear_bit_inv(unsigned long nr, + volatile unsigned long *ptr) { return test_and_clear_bit(nr ^ (BITS_PER_LONG - 1), ptr); } @@ -276,8 +283,8 @@ static inline void __clear_bit_inv(unsigned long nr, volatile unsigned long *ptr return __clear_bit(nr ^ (BITS_PER_LONG - 1), ptr); } -static inline int test_bit_inv(unsigned long nr, - const volatile unsigned long *ptr) +static inline bool test_bit_inv(unsigned long nr, + const volatile unsigned long *ptr) { return test_bit(nr ^ (BITS_PER_LONG - 1), ptr); } diff --git a/arch/s390/include/asm/page.h b/arch/s390/include/asm/page.h index a4d38092530a..823578c6b9e2 100644 --- a/arch/s390/include/asm/page.h +++ b/arch/s390/include/asm/page.h @@ -177,6 +177,8 @@ static inline int devmem_is_allowed(unsigned long pfn) #define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | \ VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) +#define ARCH_ZONE_DMA_BITS 31 + #include <asm-generic/memory_model.h> #include <asm-generic/getorder.h> diff --git a/arch/s390/include/asm/qdio.h b/arch/s390/include/asm/qdio.h index db5ef22c46e4..f647d565bd6d 100644 --- a/arch/s390/include/asm/qdio.h +++ b/arch/s390/include/asm/qdio.h @@ -28,7 +28,7 @@ * @sliba: storage list information block address * @sla: storage list address * @slsba: storage list state block address - * @akey: access key for DLIB + * @akey: access key for SLIB * @bkey: access key for SL * @ckey: access key for SBALs * @dkey: access key for SLSB @@ -50,11 +50,10 @@ struct qdesfmt0 { /** * struct qdr - queue description record (QDR) * @qfmt: queue format - * @pfmt: implementation dependent parameter format * @ac: adapter characteristics * @iqdcnt: input queue descriptor count * @oqdcnt: output queue descriptor count - * @iqdsz: inpout queue descriptor size + * @iqdsz: input queue descriptor size * @oqdsz: output queue descriptor size * @qiba: queue information block address * @qkey: queue information block key @@ -62,8 +61,7 @@ struct qdesfmt0 { */ struct qdr { u32 qfmt : 8; - u32 pfmt : 8; - u32 : 8; + u32 : 16; u32 ac : 8; u32 : 8; u32 iqdcnt : 8; @@ -327,6 +325,7 @@ typedef void qdio_handler_t(struct ccw_device *, unsigned int, int, * struct qdio_initialize - qdio initialization data * @cdev: associated ccw device * @q_format: queue format + * @qdr_ac: feature flags to set * @adapter_name: name for the adapter * @qib_param_field_format: format for qib_parm_field * @qib_param_field: pointer to 128 bytes or NULL, if no param field @@ -338,6 +337,7 @@ typedef void qdio_handler_t(struct ccw_device *, unsigned int, int, * @input_handler: handler to be called for input queues * @output_handler: handler to be called for output queues * @queue_start_poll_array: polling handlers (one per input queue or NULL) + * @scan_threshold: # of in-use buffers that triggers scan on output queue * @int_parm: interruption parameter * @input_sbal_addr_array: address of no_input_qs * 128 pointers * @output_sbal_addr_array: address of no_output_qs * 128 pointers diff --git a/arch/s390/include/asm/setup.h b/arch/s390/include/asm/setup.h index 82deb8fc8319..70bd65724ec4 100644 --- a/arch/s390/include/asm/setup.h +++ b/arch/s390/include/asm/setup.h @@ -54,6 +54,7 @@ #define INITRD_SIZE_OFFSET 0x10410 #define OLDMEM_BASE_OFFSET 0x10418 #define OLDMEM_SIZE_OFFSET 0x10420 +#define KERNEL_VERSION_OFFSET 0x10428 #define COMMAND_LINE_OFFSET 0x10480 #ifndef __ASSEMBLY__ @@ -74,7 +75,8 @@ struct parmarea { unsigned long initrd_size; /* 0x10410 */ unsigned long oldmem_base; /* 0x10418 */ unsigned long oldmem_size; /* 0x10420 */ - char pad1[0x10480 - 0x10428]; /* 0x10428 - 0x10480 */ + unsigned long kernel_version; /* 0x10428 */ + char pad1[0x10480 - 0x10430]; /* 0x10430 - 0x10480 */ char command_line[ARCH_COMMAND_LINE_SIZE]; /* 0x10480 */ }; @@ -82,6 +84,7 @@ extern int noexec_disabled; extern int memory_end_set; extern unsigned long memory_end; extern unsigned long max_physmem_end; +extern unsigned long __swsusp_reset_dma; #define MACHINE_IS_VM (S390_lowcore.machine_flags & MACHINE_FLAG_VM) #define MACHINE_IS_KVM (S390_lowcore.machine_flags & MACHINE_FLAG_KVM) diff --git a/arch/s390/include/asm/unistd.h b/arch/s390/include/asm/unistd.h index b6755685c7b8..9e9f75ef046a 100644 --- a/arch/s390/include/asm/unistd.h +++ b/arch/s390/include/asm/unistd.h @@ -34,5 +34,6 @@ #define __ARCH_WANT_SYS_FORK #define __ARCH_WANT_SYS_VFORK #define __ARCH_WANT_SYS_CLONE +#define __ARCH_WANT_SYS_CLONE3 #endif /* _ASM_S390_UNISTD_H_ */ diff --git a/arch/s390/include/uapi/asm/bpf_perf_event.h b/arch/s390/include/uapi/asm/bpf_perf_event.h index cefe7c7cd4f6..3ed42ff6da94 100644 --- a/arch/s390/include/uapi/asm/bpf_perf_event.h +++ b/arch/s390/include/uapi/asm/bpf_perf_event.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0 */ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ #ifndef _UAPI__ASM_BPF_PERF_EVENT_H__ #define _UAPI__ASM_BPF_PERF_EVENT_H__ diff --git a/arch/s390/include/uapi/asm/ipl.h b/arch/s390/include/uapi/asm/ipl.h index fd32b1cd80d2..451ba7d08905 100644 --- a/arch/s390/include/uapi/asm/ipl.h +++ b/arch/s390/include/uapi/asm/ipl.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0 */ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ #ifndef _ASM_S390_UAPI_IPL_H #define _ASM_S390_UAPI_IPL_H diff --git a/arch/s390/include/uapi/asm/zcrypt.h b/arch/s390/include/uapi/asm/zcrypt.h index 494c34c50716..8c5755f41dde 100644 --- a/arch/s390/include/uapi/asm/zcrypt.h +++ b/arch/s390/include/uapi/asm/zcrypt.h @@ -20,6 +20,7 @@ #include <linux/ioctl.h> #include <linux/compiler.h> +#include <linux/types.h> /* Name of the zcrypt device driver. */ #define ZCRYPT_NAME "zcrypt" @@ -160,17 +161,17 @@ struct ica_xcRB { * @payload_len: Payload length */ struct ep11_cprb { - uint16_t cprb_len; + __u16 cprb_len; unsigned char cprb_ver_id; unsigned char pad_000[2]; unsigned char flags; unsigned char func_id[2]; - uint32_t source_id; - uint32_t target_id; - uint32_t ret_code; - uint32_t reserved1; - uint32_t reserved2; - uint32_t payload_len; + __u32 source_id; + __u32 target_id; + __u32 ret_code; + __u32 reserved1; + __u32 reserved2; + __u32 payload_len; } __attribute__((packed)); /** @@ -179,8 +180,8 @@ struct ep11_cprb { * @dom_id: Usage domain id */ struct ep11_target_dev { - uint16_t ap_id; - uint16_t dom_id; + __u16 ap_id; + __u16 dom_id; }; /** @@ -195,14 +196,14 @@ struct ep11_target_dev { * @resp: Addr to response block */ struct ep11_urb { - uint16_t targets_num; - uint64_t targets; - uint64_t weight; - uint64_t req_no; - uint64_t req_len; - uint64_t req; - uint64_t resp_len; - uint64_t resp; + __u16 targets_num; + __u64 targets; + __u64 weight; + __u64 req_no; + __u64 req_len; + __u64 req; + __u64 resp_len; + __u64 resp; } __attribute__((packed)); /** diff --git a/arch/s390/kernel/dumpstack.c b/arch/s390/kernel/dumpstack.c index ac06c3949ab3..34bdc60c0b11 100644 --- a/arch/s390/kernel/dumpstack.c +++ b/arch/s390/kernel/dumpstack.c @@ -114,12 +114,8 @@ recursion_check: * If it comes up a second time then there's something wrong going on: * just break out and report an unknown stack type. */ - if (*visit_mask & (1UL << info->type)) { - printk_deferred_once(KERN_WARNING - "WARNING: stack recursion on stack type %d\n", - info->type); + if (*visit_mask & (1UL << info->type)) goto unknown; - } *visit_mask |= 1UL << info->type; return 0; unknown: diff --git a/arch/s390/kernel/head64.S b/arch/s390/kernel/head64.S index 5aea1a527443..f384a18e6c26 100644 --- a/arch/s390/kernel/head64.S +++ b/arch/s390/kernel/head64.S @@ -60,12 +60,5 @@ ENTRY(startup_continue) .align 16 .LPG1: -.Lpcmsk:.quad 0x0000000180000000 -.L4malign:.quad 0xffffffffffc00000 -.Lscan2g:.quad 0x80000000 + 0x20000 - 8 # 2GB + 128K - 8 -.Lnop: .long 0x07000700 -.Lparmaddr: - .quad PARMAREA - .align 64 .Ldw: .quad 0x0002000180000000,0x0000000000000000 .Laregs:.long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c index 2c0a515428d6..6837affc19e8 100644 --- a/arch/s390/kernel/ipl.c +++ b/arch/s390/kernel/ipl.c @@ -31,7 +31,6 @@ #include <asm/os_info.h> #include <asm/sections.h> #include <asm/boot_data.h> -#include <asm/uv.h> #include "entry.h" #define IPL_PARM_BLOCK_VERSION 0 @@ -892,21 +891,15 @@ static void __reipl_run(void *unused) { switch (reipl_type) { case IPL_TYPE_CCW: - uv_set_shared(__pa(reipl_block_ccw)); diag308(DIAG308_SET, reipl_block_ccw); - uv_remove_shared(__pa(reipl_block_ccw)); diag308(DIAG308_LOAD_CLEAR, NULL); break; case IPL_TYPE_FCP: - uv_set_shared(__pa(reipl_block_fcp)); diag308(DIAG308_SET, reipl_block_fcp); - uv_remove_shared(__pa(reipl_block_fcp)); diag308(DIAG308_LOAD_CLEAR, NULL); break; case IPL_TYPE_NSS: - uv_set_shared(__pa(reipl_block_nss)); diag308(DIAG308_SET, reipl_block_nss); - uv_remove_shared(__pa(reipl_block_nss)); diag308(DIAG308_LOAD_CLEAR, NULL); break; case IPL_TYPE_UNKNOWN: @@ -1176,9 +1169,7 @@ static struct kset *dump_kset; static void diag308_dump(void *dump_block) { - uv_set_shared(__pa(dump_block)); diag308(DIAG308_SET, dump_block); - uv_remove_shared(__pa(dump_block)); while (1) { if (diag308(DIAG308_LOAD_NORMAL_DUMP, NULL) != 0x302) break; diff --git a/arch/s390/kernel/machine_kexec_reloc.c b/arch/s390/kernel/machine_kexec_reloc.c index 1dded39239f8..3b664cb3ec4d 100644 --- a/arch/s390/kernel/machine_kexec_reloc.c +++ b/arch/s390/kernel/machine_kexec_reloc.c @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 #include <linux/elf.h> +#include <asm/kexec.h> int arch_kexec_do_relocs(int r_type, void *loc, unsigned long val, unsigned long addr) diff --git a/arch/s390/kernel/perf_cpum_cf_diag.c b/arch/s390/kernel/perf_cpum_cf_diag.c index d4e031f7b9c8..5f1fd1581330 100644 --- a/arch/s390/kernel/perf_cpum_cf_diag.c +++ b/arch/s390/kernel/perf_cpum_cf_diag.c @@ -34,7 +34,7 @@ struct cf_diag_csd { /* Counter set data per CPU */ unsigned char start[PAGE_SIZE]; /* Counter set at event start */ unsigned char data[PAGE_SIZE]; /* Counter set at event delete */ }; -DEFINE_PER_CPU(struct cf_diag_csd, cf_diag_csd); +static DEFINE_PER_CPU(struct cf_diag_csd, cf_diag_csd); /* Counter sets are stored as data stream in a page sized memory buffer and * exported to user space via raw data attached to the event sample data. diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index 2b94b0ad3588..253177900950 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -1114,8 +1114,7 @@ void __init setup_arch(char **cmdline_p) ROOT_DEV = Root_RAM0; - /* Is init_mm really needed? */ - init_mm.start_code = PAGE_OFFSET; + init_mm.start_code = (unsigned long) _text; init_mm.end_code = (unsigned long) _etext; init_mm.end_data = (unsigned long) _edata; init_mm.brk = (unsigned long) _end; diff --git a/arch/s390/kernel/syscalls/syscall.tbl b/arch/s390/kernel/syscalls/syscall.tbl index a90d3e945445..3054e9c035a3 100644 --- a/arch/s390/kernel/syscalls/syscall.tbl +++ b/arch/s390/kernel/syscalls/syscall.tbl @@ -437,4 +437,4 @@ 432 common fsmount sys_fsmount sys_fsmount 433 common fspick sys_fspick sys_fspick 434 common pidfd_open sys_pidfd_open sys_pidfd_open -# 435 reserved for clone3 +435 common clone3 sys_clone3 sys_clone3 diff --git a/arch/s390/kernel/vdso.c b/arch/s390/kernel/vdso.c index 243d8b1185bf..c6bc190f3c28 100644 --- a/arch/s390/kernel/vdso.c +++ b/arch/s390/kernel/vdso.c @@ -216,11 +216,6 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp) if (!vdso_enabled) return 0; - /* - * Only map the vdso for dynamically linked elf binaries. - */ - if (!uses_interp) - return 0; vdso_pages = vdso64_pages; #ifdef CONFIG_COMPAT_VDSO diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S index 49d55327de0b..7e0eb4020917 100644 --- a/arch/s390/kernel/vmlinux.lds.S +++ b/arch/s390/kernel/vmlinux.lds.S @@ -32,10 +32,9 @@ PHDRS { SECTIONS { . = 0x100000; - _stext = .; /* Start of text section */ .text : { - /* Text and read-only data */ - _text = .; + _stext = .; /* Start of text section */ + _text = .; /* Text and read-only data */ HEAD_TEXT TEXT_TEXT SCHED_TEXT @@ -47,11 +46,10 @@ SECTIONS *(.text.*_indirect_*) *(.fixup) *(.gnu.warning) + . = ALIGN(PAGE_SIZE); + _etext = .; /* End of text section */ } :text = 0x0700 - . = ALIGN(PAGE_SIZE); - _etext = .; /* End of text section */ - NOTES :text :note .dummy : { *(.dummy) } :data diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c index 3f520cd837fb..f329dcb3f44c 100644 --- a/arch/s390/kvm/kvm-s390.c +++ b/arch/s390/kvm/kvm-s390.c @@ -2516,16 +2516,6 @@ out_err: return rc; } -bool kvm_arch_has_vcpu_debugfs(void) -{ - return false; -} - -int kvm_arch_create_vcpu_debugfs(struct kvm_vcpu *vcpu) -{ - return 0; -} - void kvm_arch_vcpu_destroy(struct kvm_vcpu *vcpu) { VCPU_EVENT(vcpu, 3, "%s", "free cpu"); diff --git a/arch/s390/lib/xor.c b/arch/s390/lib/xor.c index 96580590ccaf..29d9470dbceb 100644 --- a/arch/s390/lib/xor.c +++ b/arch/s390/lib/xor.c @@ -9,6 +9,7 @@ #include <linux/types.h> #include <linux/export.h> #include <linux/raid/xor.h> +#include <asm/xor.h> static void xor_xc_2(unsigned long bytes, unsigned long *p1, unsigned long *p2) { diff --git a/arch/s390/mm/dump_pagetables.c b/arch/s390/mm/dump_pagetables.c index 3b93ba0b5d8d..5d67b81c704a 100644 --- a/arch/s390/mm/dump_pagetables.c +++ b/arch/s390/mm/dump_pagetables.c @@ -161,9 +161,9 @@ static void walk_pmd_level(struct seq_file *m, struct pg_state *st, } #endif - for (i = 0; i < PTRS_PER_PMD && addr < max_addr; i++) { + pmd = pmd_offset(pud, addr); + for (i = 0; i < PTRS_PER_PMD && addr < max_addr; i++, pmd++) { st->current_address = addr; - pmd = pmd_offset(pud, addr); if (!pmd_none(*pmd)) { if (pmd_large(*pmd)) { prot = pmd_val(*pmd) & @@ -192,9 +192,9 @@ static void walk_pud_level(struct seq_file *m, struct pg_state *st, } #endif - for (i = 0; i < PTRS_PER_PUD && addr < max_addr; i++) { + pud = pud_offset(p4d, addr); + for (i = 0; i < PTRS_PER_PUD && addr < max_addr; i++, pud++) { st->current_address = addr; - pud = pud_offset(p4d, addr); if (!pud_none(*pud)) if (pud_large(*pud)) { prot = pud_val(*pud) & @@ -222,9 +222,9 @@ static void walk_p4d_level(struct seq_file *m, struct pg_state *st, } #endif - for (i = 0; i < PTRS_PER_P4D && addr < max_addr; i++) { + p4d = p4d_offset(pgd, addr); + for (i = 0; i < PTRS_PER_P4D && addr < max_addr; i++, p4d++) { st->current_address = addr; - p4d = p4d_offset(pgd, addr); if (!p4d_none(*p4d)) walk_pud_level(m, st, p4d, addr); else diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c index 63507662828f..7b0bb475c166 100644 --- a/arch/s390/mm/fault.c +++ b/arch/s390/mm/fault.c @@ -327,6 +327,7 @@ static noinline void do_fault_error(struct pt_regs *regs, int access, case VM_FAULT_BADACCESS: if (access == VM_EXEC && signal_return(regs) == 0) break; + /* fallthrough */ case VM_FAULT_BADMAP: /* Bad memory access. Check if it is kernel or user space. */ if (user_mode(regs)) { @@ -336,7 +337,9 @@ static noinline void do_fault_error(struct pt_regs *regs, int access, do_sigsegv(regs, si_code); break; } + /* fallthrough */ case VM_FAULT_BADCONTEXT: + /* fallthrough */ case VM_FAULT_PFAULT: do_no_context(regs); break; diff --git a/arch/s390/mm/gmap.c b/arch/s390/mm/gmap.c index 1e668b95e0c6..39c3a6e3d262 100644 --- a/arch/s390/mm/gmap.c +++ b/arch/s390/mm/gmap.c @@ -2424,8 +2424,8 @@ EXPORT_SYMBOL_GPL(gmap_pmdp_idte_global); * This function is assumed to be called with the guest_table_lock * held. */ -bool gmap_test_and_clear_dirty_pmd(struct gmap *gmap, pmd_t *pmdp, - unsigned long gaddr) +static bool gmap_test_and_clear_dirty_pmd(struct gmap *gmap, pmd_t *pmdp, + unsigned long gaddr) { if (pmd_val(*pmdp) & _SEGMENT_ENTRY_INVALID) return false; diff --git a/arch/s390/mm/pgalloc.c b/arch/s390/mm/pgalloc.c index 99e06213a22b..54fcdf66ae96 100644 --- a/arch/s390/mm/pgalloc.c +++ b/arch/s390/mm/pgalloc.c @@ -17,8 +17,6 @@ #ifdef CONFIG_PGSTE -static int page_table_allocate_pgste_min = 0; -static int page_table_allocate_pgste_max = 1; int page_table_allocate_pgste = 0; EXPORT_SYMBOL(page_table_allocate_pgste); @@ -29,8 +27,8 @@ static struct ctl_table page_table_sysctl[] = { .maxlen = sizeof(int), .mode = S_IRUGO | S_IWUSR, .proc_handler = proc_dointvec_minmax, - .extra1 = &page_table_allocate_pgste_min, - .extra2 = &page_table_allocate_pgste_max, + .extra1 = SYSCTL_ZERO, + .extra2 = SYSCTL_ONE, }, { } }; diff --git a/arch/s390/scripts/Makefile.chkbss b/arch/s390/scripts/Makefile.chkbss index 884a9caff5fb..f4f4c2c6dee9 100644 --- a/arch/s390/scripts/Makefile.chkbss +++ b/arch/s390/scripts/Makefile.chkbss @@ -11,8 +11,7 @@ chkbss: $(addprefix $(obj)/, $(chkbss-files)) quiet_cmd_chkbss = CHKBSS $< cmd_chkbss = \ - if $(OBJDUMP) -h $< | grep -q "\.bss" && \ - ! $(OBJDUMP) -j .bss -w -h $< | awk 'END { if ($$3) exit 1 }'; then \ + if ! $(OBJSIZE) --common $< | $(AWK) 'END { if ($$3) exit 1 }'; then \ echo "error: $< .bss section is not empty" >&2; exit 1; \ fi; \ touch $@; diff --git a/arch/sh/include/uapi/asm/setup.h b/arch/sh/include/uapi/asm/setup.h index 1170dd2fb998..4bd19f80f9b0 100644 --- a/arch/sh/include/uapi/asm/setup.h +++ b/arch/sh/include/uapi/asm/setup.h @@ -1,2 +1,2 @@ -/* SPDX-License-Identifier: GPL-2.0 */ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ #include <asm-generic/setup.h> diff --git a/arch/sh/include/uapi/asm/types.h b/arch/sh/include/uapi/asm/types.h index f83795fdc0da..68100e108ea6 100644 --- a/arch/sh/include/uapi/asm/types.h +++ b/arch/sh/include/uapi/asm/types.h @@ -1,2 +1,2 @@ -/* SPDX-License-Identifier: GPL-2.0 */ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ #include <asm-generic/types.h> diff --git a/arch/sparc/include/uapi/asm/oradax.h b/arch/sparc/include/uapi/asm/oradax.h index 64c67f2ea33f..0dace69058ab 100644 --- a/arch/sparc/include/uapi/asm/oradax.h +++ b/arch/sparc/include/uapi/asm/oradax.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* SPDX-License-Identifier: GPL-2.0-or-later WITH Linux-syscall-note */ /* * Copyright (c) 2017, Oracle and/or its affiliates. All rights reserved. */ diff --git a/arch/x86/boot/string.c b/arch/x86/boot/string.c index 401e30ca0a75..8272a4492844 100644 --- a/arch/x86/boot/string.c +++ b/arch/x86/boot/string.c @@ -37,6 +37,14 @@ int memcmp(const void *s1, const void *s2, size_t len) return diff; } +/* + * Clang may lower `memcmp == 0` to `bcmp == 0`. + */ +int bcmp(const void *s1, const void *s2, size_t len) +{ + return memcmp(s1, s2, len); +} + int strcmp(const char *str1, const char *str2) { const unsigned char *s1 = (const unsigned char *)str1; diff --git a/arch/x86/entry/calling.h b/arch/x86/entry/calling.h index 830bd984182b..515c0ceeb4a3 100644 --- a/arch/x86/entry/calling.h +++ b/arch/x86/entry/calling.h @@ -314,6 +314,23 @@ For 32-bit we have the following conventions - kernel is built with #endif +/* + * Mitigate Spectre v1 for conditional swapgs code paths. + * + * FENCE_SWAPGS_USER_ENTRY is used in the user entry swapgs code path, to + * prevent a speculative swapgs when coming from kernel space. + * + * FENCE_SWAPGS_KERNEL_ENTRY is used in the kernel entry non-swapgs code path, + * to prevent the swapgs from getting speculatively skipped when coming from + * user space. + */ +.macro FENCE_SWAPGS_USER_ENTRY + ALTERNATIVE "", "lfence", X86_FEATURE_FENCE_SWAPGS_USER +.endm +.macro FENCE_SWAPGS_KERNEL_ENTRY + ALTERNATIVE "", "lfence", X86_FEATURE_FENCE_SWAPGS_KERNEL +.endm + .macro STACKLEAK_ERASE_NOCLOBBER #ifdef CONFIG_GCC_PLUGIN_STACKLEAK PUSH_AND_CLEAR_REGS diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S index 2bb986f305ac..4f86928246e7 100644 --- a/arch/x86/entry/entry_32.S +++ b/arch/x86/entry/entry_32.S @@ -1443,8 +1443,12 @@ BUILD_INTERRUPT3(hv_stimer0_callback_vector, HYPERV_STIMER0_VECTOR, ENTRY(page_fault) ASM_CLAC - pushl $0; /* %gs's slot on the stack */ + pushl $do_page_fault + jmp common_exception_read_cr2 +END(page_fault) +common_exception_read_cr2: + /* the function address is in %gs's slot on the stack */ SAVE_ALL switch_stacks=1 skip_gs=1 ENCODE_FRAME_POINTER @@ -1452,6 +1456,7 @@ ENTRY(page_fault) /* fixup %gs */ GS_TO_REG %ecx + movl PT_GS(%esp), %edi REG_TO_PTGS %ecx SET_KERNEL_GS %ecx @@ -1463,9 +1468,9 @@ ENTRY(page_fault) TRACE_IRQS_OFF movl %esp, %eax # pt_regs pointer - call do_page_fault + CALL_NOSPEC %edi jmp ret_from_exception -END(page_fault) +END(common_exception_read_cr2) common_exception: /* the function address is in %gs's slot on the stack */ @@ -1595,7 +1600,7 @@ END(general_protection) ENTRY(async_page_fault) ASM_CLAC pushl $do_async_page_fault - jmp common_exception + jmp common_exception_read_cr2 END(async_page_fault) #endif diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S index 3f5a978a02a7..be9ca198c581 100644 --- a/arch/x86/entry/entry_64.S +++ b/arch/x86/entry/entry_64.S @@ -519,7 +519,7 @@ ENTRY(interrupt_entry) testb $3, CS-ORIG_RAX+8(%rsp) jz 1f SWAPGS - + FENCE_SWAPGS_USER_ENTRY /* * Switch to the thread stack. The IRET frame and orig_ax are * on the stack, as well as the return address. RDI..R12 are @@ -549,8 +549,10 @@ ENTRY(interrupt_entry) UNWIND_HINT_FUNC movq (%rdi), %rdi + jmp 2f 1: - + FENCE_SWAPGS_KERNEL_ENTRY +2: PUSH_AND_CLEAR_REGS save_ret=1 ENCODE_FRAME_POINTER 8 @@ -1238,6 +1240,13 @@ ENTRY(paranoid_entry) */ SAVE_AND_SWITCH_TO_KERNEL_CR3 scratch_reg=%rax save_reg=%r14 + /* + * The above SAVE_AND_SWITCH_TO_KERNEL_CR3 macro doesn't do an + * unconditional CR3 write, even in the PTI case. So do an lfence + * to prevent GS speculation, regardless of whether PTI is enabled. + */ + FENCE_SWAPGS_KERNEL_ENTRY + ret END(paranoid_entry) @@ -1288,6 +1297,7 @@ ENTRY(error_entry) * from user mode due to an IRET fault. */ SWAPGS + FENCE_SWAPGS_USER_ENTRY /* We have user CR3. Change to kernel CR3. */ SWITCH_TO_KERNEL_CR3 scratch_reg=%rax @@ -1301,6 +1311,8 @@ ENTRY(error_entry) pushq %r12 ret +.Lerror_entry_done_lfence: + FENCE_SWAPGS_KERNEL_ENTRY .Lerror_entry_done: ret @@ -1318,7 +1330,7 @@ ENTRY(error_entry) cmpq %rax, RIP+8(%rsp) je .Lbstep_iret cmpq $.Lgs_change, RIP+8(%rsp) - jne .Lerror_entry_done + jne .Lerror_entry_done_lfence /* * hack: .Lgs_change can fail with user gsbase. If this happens, fix up @@ -1326,6 +1338,7 @@ ENTRY(error_entry) * .Lgs_change's error handler with kernel gsbase. */ SWAPGS + FENCE_SWAPGS_USER_ENTRY SWITCH_TO_KERNEL_CR3 scratch_reg=%rax jmp .Lerror_entry_done @@ -1340,6 +1353,7 @@ ENTRY(error_entry) * gsbase and CR3. Switch to kernel gsbase and CR3: */ SWAPGS + FENCE_SWAPGS_USER_ENTRY SWITCH_TO_KERNEL_CR3 scratch_reg=%rax /* @@ -1431,6 +1445,7 @@ ENTRY(nmi) swapgs cld + FENCE_SWAPGS_USER_ENTRY SWITCH_TO_KERNEL_CR3 scratch_reg=%rdx movq %rsp, %rdx movq PER_CPU_VAR(cpu_current_top_of_stack), %rsp diff --git a/arch/x86/events/intel/core.c b/arch/x86/events/intel/core.c index 9e911a96972b..648260b5f367 100644 --- a/arch/x86/events/intel/core.c +++ b/arch/x86/events/intel/core.c @@ -20,7 +20,6 @@ #include <asm/intel-family.h> #include <asm/apic.h> #include <asm/cpu_device_id.h> -#include <asm/hypervisor.h> #include "../perf_event.h" @@ -263,8 +262,8 @@ static struct event_constraint intel_icl_event_constraints[] = { }; static struct extra_reg intel_icl_extra_regs[] __read_mostly = { - INTEL_UEVENT_EXTRA_REG(0x01b7, MSR_OFFCORE_RSP_0, 0x3fffff9fffull, RSP_0), - INTEL_UEVENT_EXTRA_REG(0x01bb, MSR_OFFCORE_RSP_1, 0x3fffff9fffull, RSP_1), + INTEL_UEVENT_EXTRA_REG(0x01b7, MSR_OFFCORE_RSP_0, 0x3fffffbfffull, RSP_0), + INTEL_UEVENT_EXTRA_REG(0x01bb, MSR_OFFCORE_RSP_1, 0x3fffffbfffull, RSP_1), INTEL_UEVENT_PEBS_LDLAT_EXTRA_REG(0x01cd), INTEL_UEVENT_EXTRA_REG(0x01c6, MSR_PEBS_FRONTEND, 0x7fff17, FE), EVENT_EXTRA_END @@ -4053,7 +4052,7 @@ static bool check_msr(unsigned long msr, u64 mask) * Disable the check for real HW, so we don't * mess with potentionaly enabled registers: */ - if (hypervisor_is_type(X86_HYPER_NATIVE)) + if (!boot_cpu_has(X86_FEATURE_HYPERVISOR)) return true; /* @@ -4955,6 +4954,7 @@ __init int intel_pmu_init(void) case INTEL_FAM6_SKYLAKE_X: pmem = true; + /* fall through */ case INTEL_FAM6_SKYLAKE_MOBILE: case INTEL_FAM6_SKYLAKE_DESKTOP: case INTEL_FAM6_KABYLAKE_MOBILE: @@ -5004,6 +5004,7 @@ __init int intel_pmu_init(void) case INTEL_FAM6_ICELAKE_X: case INTEL_FAM6_ICELAKE_XEON_D: pmem = true; + /* fall through */ case INTEL_FAM6_ICELAKE_MOBILE: case INTEL_FAM6_ICELAKE_DESKTOP: x86_pmu.late_ack = true; diff --git a/arch/x86/events/intel/ds.c b/arch/x86/events/intel/ds.c index 2c8db2c19328..f1269e804e9b 100644 --- a/arch/x86/events/intel/ds.c +++ b/arch/x86/events/intel/ds.c @@ -851,7 +851,7 @@ struct event_constraint intel_skl_pebs_event_constraints[] = { struct event_constraint intel_icl_pebs_event_constraints[] = { INTEL_FLAGS_UEVENT_CONSTRAINT(0x1c0, 0x100000000ULL), /* INST_RETIRED.PREC_DIST */ - INTEL_FLAGS_UEVENT_CONSTRAINT(0x0400, 0x400000000ULL), /* SLOTS */ + INTEL_FLAGS_UEVENT_CONSTRAINT(0x0400, 0x800000000ULL), /* SLOTS */ INTEL_PLD_CONSTRAINT(0x1cd, 0xff), /* MEM_TRANS_RETIRED.LOAD_LATENCY */ INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_LD(0x1d0, 0xf), /* MEM_INST_RETIRED.LOAD */ diff --git a/arch/x86/include/asm/cpufeatures.h b/arch/x86/include/asm/cpufeatures.h index 998c2cc08363..e880f2408e29 100644 --- a/arch/x86/include/asm/cpufeatures.h +++ b/arch/x86/include/asm/cpufeatures.h @@ -281,6 +281,8 @@ #define X86_FEATURE_CQM_OCCUP_LLC (11*32+ 1) /* LLC occupancy monitoring */ #define X86_FEATURE_CQM_MBM_TOTAL (11*32+ 2) /* LLC Total MBM monitoring */ #define X86_FEATURE_CQM_MBM_LOCAL (11*32+ 3) /* LLC Local MBM monitoring */ +#define X86_FEATURE_FENCE_SWAPGS_USER (11*32+ 4) /* "" LFENCE in user entry SWAPGS path */ +#define X86_FEATURE_FENCE_SWAPGS_KERNEL (11*32+ 5) /* "" LFENCE in kernel entry SWAPGS path */ /* Intel-defined CPU features, CPUID level 0x00000007:1 (EAX), word 12 */ #define X86_FEATURE_AVX512_BF16 (12*32+ 5) /* AVX512 BFLOAT16 instructions */ @@ -394,5 +396,6 @@ #define X86_BUG_L1TF X86_BUG(18) /* CPU is affected by L1 Terminal Fault */ #define X86_BUG_MDS X86_BUG(19) /* CPU is affected by Microarchitectural data sampling */ #define X86_BUG_MSBDS_ONLY X86_BUG(20) /* CPU is only affected by the MSDBS variant of BUG_MDS */ +#define X86_BUG_SWAPGS X86_BUG(21) /* CPU is affected by speculation through SWAPGS */ #endif /* _ASM_X86_CPUFEATURES_H */ diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h index 8282b8d41209..74e88e5edd9c 100644 --- a/arch/x86/include/asm/kvm_host.h +++ b/arch/x86/include/asm/kvm_host.h @@ -35,6 +35,8 @@ #include <asm/kvm_vcpu_regs.h> #include <asm/hyperv-tlfs.h> +#define __KVM_HAVE_ARCH_VCPU_DEBUGFS + #define KVM_MAX_VCPUS 288 #define KVM_SOFT_MAX_VCPUS 240 #define KVM_MAX_VCPU_ID 1023 @@ -607,15 +609,16 @@ struct kvm_vcpu_arch { /* * QEMU userspace and the guest each have their own FPU state. - * In vcpu_run, we switch between the user, maintained in the - * task_struct struct, and guest FPU contexts. While running a VCPU, - * the VCPU thread will have the guest FPU context. + * In vcpu_run, we switch between the user and guest FPU contexts. + * While running a VCPU, the VCPU thread will have the guest FPU + * context. * * Note that while the PKRU state lives inside the fpu registers, * it is switched out separately at VMENTER and VMEXIT time. The * "guest_fpu" state here contains the guest FPU context, with the * host PRKU bits. */ + struct fpu *user_fpu; struct fpu *guest_fpu; u64 xcr0; @@ -1174,6 +1177,7 @@ struct kvm_x86_ops { int (*update_pi_irte)(struct kvm *kvm, unsigned int host_irq, uint32_t guest_irq, bool set); void (*apicv_post_state_restore)(struct kvm_vcpu *vcpu); + bool (*dy_apicv_has_pending_interrupt)(struct kvm_vcpu *vcpu); int (*set_hv_timer)(struct kvm_vcpu *vcpu, u64 guest_deadline_tsc, bool *expired); diff --git a/arch/x86/include/asm/vdso/gettimeofday.h b/arch/x86/include/asm/vdso/gettimeofday.h index ae91429129a6..ba71a63cdac4 100644 --- a/arch/x86/include/asm/vdso/gettimeofday.h +++ b/arch/x86/include/asm/vdso/gettimeofday.h @@ -96,6 +96,8 @@ long clock_getres_fallback(clockid_t _clkid, struct __kernel_timespec *_ts) #else +#define VDSO_HAS_32BIT_FALLBACK 1 + static __always_inline long clock_gettime_fallback(clockid_t _clkid, struct __kernel_timespec *_ts) { @@ -114,6 +116,23 @@ long clock_gettime_fallback(clockid_t _clkid, struct __kernel_timespec *_ts) } static __always_inline +long clock_gettime32_fallback(clockid_t _clkid, struct old_timespec32 *_ts) +{ + long ret; + + asm ( + "mov %%ebx, %%edx \n" + "mov %[clock], %%ebx \n" + "call __kernel_vsyscall \n" + "mov %%edx, %%ebx \n" + : "=a" (ret), "=m" (*_ts) + : "0" (__NR_clock_gettime), [clock] "g" (_clkid), "c" (_ts) + : "edx"); + + return ret; +} + +static __always_inline long gettimeofday_fallback(struct __kernel_old_timeval *_tv, struct timezone *_tz) { @@ -148,6 +167,23 @@ clock_getres_fallback(clockid_t _clkid, struct __kernel_timespec *_ts) return ret; } +static __always_inline +long clock_getres32_fallback(clockid_t _clkid, struct old_timespec32 *_ts) +{ + long ret; + + asm ( + "mov %%ebx, %%edx \n" + "mov %[clock], %%ebx \n" + "call __kernel_vsyscall \n" + "mov %%edx, %%ebx \n" + : "=a" (ret), "=m" (*_ts) + : "0" (__NR_clock_getres), [clock] "g" (_clkid), "c" (_ts) + : "edx"); + + return ret; +} + #endif #ifdef CONFIG_PARAVIRT_CLOCK diff --git a/arch/x86/include/uapi/asm/byteorder.h b/arch/x86/include/uapi/asm/byteorder.h index 484e3cfd7ef2..149143cab9ff 100644 --- a/arch/x86/include/uapi/asm/byteorder.h +++ b/arch/x86/include/uapi/asm/byteorder.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0 */ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ #ifndef _ASM_X86_BYTEORDER_H #define _ASM_X86_BYTEORDER_H diff --git a/arch/x86/include/uapi/asm/hwcap2.h b/arch/x86/include/uapi/asm/hwcap2.h index 6ebaae90e207..8b2effe6efb8 100644 --- a/arch/x86/include/uapi/asm/hwcap2.h +++ b/arch/x86/include/uapi/asm/hwcap2.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0 */ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ #ifndef _ASM_X86_HWCAP2_H #define _ASM_X86_HWCAP2_H diff --git a/arch/x86/include/uapi/asm/sigcontext32.h b/arch/x86/include/uapi/asm/sigcontext32.h index 6b18e88de8a6..7114801d0499 100644 --- a/arch/x86/include/uapi/asm/sigcontext32.h +++ b/arch/x86/include/uapi/asm/sigcontext32.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0 */ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ #ifndef _ASM_X86_SIGCONTEXT32_H #define _ASM_X86_SIGCONTEXT32_H diff --git a/arch/x86/include/uapi/asm/types.h b/arch/x86/include/uapi/asm/types.h index df55e1ddb0c9..9d5c11a24279 100644 --- a/arch/x86/include/uapi/asm/types.h +++ b/arch/x86/include/uapi/asm/types.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0 */ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ #ifndef _ASM_X86_TYPES_H #define _ASM_X86_TYPES_H diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c index 66ca906aa790..c6fa3ef10b4e 100644 --- a/arch/x86/kernel/cpu/bugs.c +++ b/arch/x86/kernel/cpu/bugs.c @@ -34,6 +34,7 @@ #include "cpu.h" +static void __init spectre_v1_select_mitigation(void); static void __init spectre_v2_select_mitigation(void); static void __init ssb_select_mitigation(void); static void __init l1tf_select_mitigation(void); @@ -98,17 +99,11 @@ void __init check_bugs(void) if (boot_cpu_has(X86_FEATURE_STIBP)) x86_spec_ctrl_mask |= SPEC_CTRL_STIBP; - /* Select the proper spectre mitigation before patching alternatives */ + /* Select the proper CPU mitigations before patching alternatives: */ + spectre_v1_select_mitigation(); spectre_v2_select_mitigation(); - - /* - * Select proper mitigation for any exposure to the Speculative Store - * Bypass vulnerability. - */ ssb_select_mitigation(); - l1tf_select_mitigation(); - mds_select_mitigation(); arch_smt_update(); @@ -274,6 +269,98 @@ static int __init mds_cmdline(char *str) early_param("mds", mds_cmdline); #undef pr_fmt +#define pr_fmt(fmt) "Spectre V1 : " fmt + +enum spectre_v1_mitigation { + SPECTRE_V1_MITIGATION_NONE, + SPECTRE_V1_MITIGATION_AUTO, +}; + +static enum spectre_v1_mitigation spectre_v1_mitigation __ro_after_init = + SPECTRE_V1_MITIGATION_AUTO; + +static const char * const spectre_v1_strings[] = { + [SPECTRE_V1_MITIGATION_NONE] = "Vulnerable: __user pointer sanitization and usercopy barriers only; no swapgs barriers", + [SPECTRE_V1_MITIGATION_AUTO] = "Mitigation: usercopy/swapgs barriers and __user pointer sanitization", +}; + +/* + * Does SMAP provide full mitigation against speculative kernel access to + * userspace? + */ +static bool smap_works_speculatively(void) +{ + if (!boot_cpu_has(X86_FEATURE_SMAP)) + return false; + + /* + * On CPUs which are vulnerable to Meltdown, SMAP does not + * prevent speculative access to user data in the L1 cache. + * Consider SMAP to be non-functional as a mitigation on these + * CPUs. + */ + if (boot_cpu_has(X86_BUG_CPU_MELTDOWN)) + return false; + + return true; +} + +static void __init spectre_v1_select_mitigation(void) +{ + if (!boot_cpu_has_bug(X86_BUG_SPECTRE_V1) || cpu_mitigations_off()) { + spectre_v1_mitigation = SPECTRE_V1_MITIGATION_NONE; + return; + } + + if (spectre_v1_mitigation == SPECTRE_V1_MITIGATION_AUTO) { + /* + * With Spectre v1, a user can speculatively control either + * path of a conditional swapgs with a user-controlled GS + * value. The mitigation is to add lfences to both code paths. + * + * If FSGSBASE is enabled, the user can put a kernel address in + * GS, in which case SMAP provides no protection. + * + * [ NOTE: Don't check for X86_FEATURE_FSGSBASE until the + * FSGSBASE enablement patches have been merged. ] + * + * If FSGSBASE is disabled, the user can only put a user space + * address in GS. That makes an attack harder, but still + * possible if there's no SMAP protection. + */ + if (!smap_works_speculatively()) { + /* + * Mitigation can be provided from SWAPGS itself or + * PTI as the CR3 write in the Meltdown mitigation + * is serializing. + * + * If neither is there, mitigate with an LFENCE to + * stop speculation through swapgs. + */ + if (boot_cpu_has_bug(X86_BUG_SWAPGS) && + !boot_cpu_has(X86_FEATURE_PTI)) + setup_force_cpu_cap(X86_FEATURE_FENCE_SWAPGS_USER); + + /* + * Enable lfences in the kernel entry (non-swapgs) + * paths, to prevent user entry from speculatively + * skipping swapgs. + */ + setup_force_cpu_cap(X86_FEATURE_FENCE_SWAPGS_KERNEL); + } + } + + pr_info("%s\n", spectre_v1_strings[spectre_v1_mitigation]); +} + +static int __init nospectre_v1_cmdline(char *str) +{ + spectre_v1_mitigation = SPECTRE_V1_MITIGATION_NONE; + return 0; +} +early_param("nospectre_v1", nospectre_v1_cmdline); + +#undef pr_fmt #define pr_fmt(fmt) "Spectre V2 : " fmt static enum spectre_v2_mitigation spectre_v2_enabled __ro_after_init = @@ -1226,7 +1313,7 @@ static ssize_t l1tf_show_state(char *buf) static ssize_t mds_show_state(char *buf) { - if (!hypervisor_is_type(X86_HYPER_NATIVE)) { + if (boot_cpu_has(X86_FEATURE_HYPERVISOR)) { return sprintf(buf, "%s; SMT Host state unknown\n", mds_strings[mds_mitigation]); } @@ -1290,7 +1377,7 @@ static ssize_t cpu_show_common(struct device *dev, struct device_attribute *attr break; case X86_BUG_SPECTRE_V1: - return sprintf(buf, "Mitigation: __user pointer sanitization\n"); + return sprintf(buf, "%s\n", spectre_v1_strings[spectre_v1_mitigation]); case X86_BUG_SPECTRE_V2: return sprintf(buf, "%s%s%s%s%s%s\n", spectre_v2_strings[spectre_v2_enabled], diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index 11472178e17f..f125bf7ecb6f 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -1022,6 +1022,7 @@ static void identify_cpu_without_cpuid(struct cpuinfo_x86 *c) #define NO_L1TF BIT(3) #define NO_MDS BIT(4) #define MSBDS_ONLY BIT(5) +#define NO_SWAPGS BIT(6) #define VULNWL(_vendor, _family, _model, _whitelist) \ { X86_VENDOR_##_vendor, _family, _model, X86_FEATURE_ANY, _whitelist } @@ -1048,30 +1049,38 @@ static const __initconst struct x86_cpu_id cpu_vuln_whitelist[] = { VULNWL_INTEL(ATOM_BONNELL, NO_SPECULATION), VULNWL_INTEL(ATOM_BONNELL_MID, NO_SPECULATION), - VULNWL_INTEL(ATOM_SILVERMONT, NO_SSB | NO_L1TF | MSBDS_ONLY), - VULNWL_INTEL(ATOM_SILVERMONT_X, NO_SSB | NO_L1TF | MSBDS_ONLY), - VULNWL_INTEL(ATOM_SILVERMONT_MID, NO_SSB | NO_L1TF | MSBDS_ONLY), - VULNWL_INTEL(ATOM_AIRMONT, NO_SSB | NO_L1TF | MSBDS_ONLY), - VULNWL_INTEL(XEON_PHI_KNL, NO_SSB | NO_L1TF | MSBDS_ONLY), - VULNWL_INTEL(XEON_PHI_KNM, NO_SSB | NO_L1TF | MSBDS_ONLY), + VULNWL_INTEL(ATOM_SILVERMONT, NO_SSB | NO_L1TF | MSBDS_ONLY | NO_SWAPGS), + VULNWL_INTEL(ATOM_SILVERMONT_X, NO_SSB | NO_L1TF | MSBDS_ONLY | NO_SWAPGS), + VULNWL_INTEL(ATOM_SILVERMONT_MID, NO_SSB | NO_L1TF | MSBDS_ONLY | NO_SWAPGS), + VULNWL_INTEL(ATOM_AIRMONT, NO_SSB | NO_L1TF | MSBDS_ONLY | NO_SWAPGS), + VULNWL_INTEL(XEON_PHI_KNL, NO_SSB | NO_L1TF | MSBDS_ONLY | NO_SWAPGS), + VULNWL_INTEL(XEON_PHI_KNM, NO_SSB | NO_L1TF | MSBDS_ONLY | NO_SWAPGS), VULNWL_INTEL(CORE_YONAH, NO_SSB), - VULNWL_INTEL(ATOM_AIRMONT_MID, NO_L1TF | MSBDS_ONLY), + VULNWL_INTEL(ATOM_AIRMONT_MID, NO_L1TF | MSBDS_ONLY | NO_SWAPGS), - VULNWL_INTEL(ATOM_GOLDMONT, NO_MDS | NO_L1TF), - VULNWL_INTEL(ATOM_GOLDMONT_X, NO_MDS | NO_L1TF), - VULNWL_INTEL(ATOM_GOLDMONT_PLUS, NO_MDS | NO_L1TF), + VULNWL_INTEL(ATOM_GOLDMONT, NO_MDS | NO_L1TF | NO_SWAPGS), + VULNWL_INTEL(ATOM_GOLDMONT_X, NO_MDS | NO_L1TF | NO_SWAPGS), + VULNWL_INTEL(ATOM_GOLDMONT_PLUS, NO_MDS | NO_L1TF | NO_SWAPGS), + + /* + * Technically, swapgs isn't serializing on AMD (despite it previously + * being documented as such in the APM). But according to AMD, %gs is + * updated non-speculatively, and the issuing of %gs-relative memory + * operands will be blocked until the %gs update completes, which is + * good enough for our purposes. + */ /* AMD Family 0xf - 0x12 */ - VULNWL_AMD(0x0f, NO_MELTDOWN | NO_SSB | NO_L1TF | NO_MDS), - VULNWL_AMD(0x10, NO_MELTDOWN | NO_SSB | NO_L1TF | NO_MDS), - VULNWL_AMD(0x11, NO_MELTDOWN | NO_SSB | NO_L1TF | NO_MDS), - VULNWL_AMD(0x12, NO_MELTDOWN | NO_SSB | NO_L1TF | NO_MDS), + VULNWL_AMD(0x0f, NO_MELTDOWN | NO_SSB | NO_L1TF | NO_MDS | NO_SWAPGS), + VULNWL_AMD(0x10, NO_MELTDOWN | NO_SSB | NO_L1TF | NO_MDS | NO_SWAPGS), + VULNWL_AMD(0x11, NO_MELTDOWN | NO_SSB | NO_L1TF | NO_MDS | NO_SWAPGS), + VULNWL_AMD(0x12, NO_MELTDOWN | NO_SSB | NO_L1TF | NO_MDS | NO_SWAPGS), /* FAMILY_ANY must be last, otherwise 0x0f - 0x12 matches won't work */ - VULNWL_AMD(X86_FAMILY_ANY, NO_MELTDOWN | NO_L1TF | NO_MDS), - VULNWL_HYGON(X86_FAMILY_ANY, NO_MELTDOWN | NO_L1TF | NO_MDS), + VULNWL_AMD(X86_FAMILY_ANY, NO_MELTDOWN | NO_L1TF | NO_MDS | NO_SWAPGS), + VULNWL_HYGON(X86_FAMILY_ANY, NO_MELTDOWN | NO_L1TF | NO_MDS | NO_SWAPGS), {} }; @@ -1108,6 +1117,9 @@ static void __init cpu_set_bug_bits(struct cpuinfo_x86 *c) setup_force_cpu_bug(X86_BUG_MSBDS_ONLY); } + if (!cpu_matches(NO_SWAPGS)) + setup_force_cpu_bug(X86_BUG_SWAPGS); + if (cpu_matches(NO_MELTDOWN)) return; diff --git a/arch/x86/kernel/cpu/mtrr/cyrix.c b/arch/x86/kernel/cpu/mtrr/cyrix.c index 4296c702a3f7..72182809b333 100644 --- a/arch/x86/kernel/cpu/mtrr/cyrix.c +++ b/arch/x86/kernel/cpu/mtrr/cyrix.c @@ -98,6 +98,7 @@ cyrix_get_free_region(unsigned long base, unsigned long size, int replace_reg) case 7: if (size < 0x40) break; + /* Else, fall through */ case 6: case 5: case 4: diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S index a6342c899be5..f3d3e9646a99 100644 --- a/arch/x86/kernel/head_64.S +++ b/arch/x86/kernel/head_64.S @@ -193,10 +193,10 @@ ENTRY(secondary_startup_64) /* Set up %gs. * - * The base of %gs always points to the bottom of the irqstack - * union. If the stack protector canary is enabled, it is - * located at %gs:40. Note that, on SMP, the boot cpu uses - * init data section till per cpu areas are set up. + * The base of %gs always points to fixed_percpu_data. If the + * stack protector canary is enabled, it is located at %gs:40. + * Note that, on SMP, the boot cpu uses init data section until + * the per cpu areas are set up. */ movl $MSR_GS_BASE,%ecx movl initial_gs(%rip),%eax diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index c43e96a938d0..c6f791bc481e 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -827,10 +827,6 @@ int __init hpet_enable(void) if (!hpet_cfg_working()) goto out_nohpet; - /* Validate that the counter is counting */ - if (!hpet_counting()) - goto out_nohpet; - /* * Read the period and check for a sane value: */ @@ -896,6 +892,14 @@ int __init hpet_enable(void) } hpet_print_config(); + /* + * Validate that the counter is counting. This needs to be done + * after sanitizing the config registers to properly deal with + * force enabled HPETs. + */ + if (!hpet_counting()) + goto out_nohpet; + clocksource_register_hz(&clocksource_hpet, (u32)hpet_freq); if (id & HPET_ID_LEGSUP) { diff --git a/arch/x86/kernel/kvm.c b/arch/x86/kernel/kvm.c index b7f34fe2171e..4ab377c9fffe 100644 --- a/arch/x86/kernel/kvm.c +++ b/arch/x86/kernel/kvm.c @@ -308,9 +308,6 @@ static notrace void kvm_guest_apic_eoi_write(u32 reg, u32 val) static void kvm_guest_cpu_init(void) { - if (!kvm_para_available()) - return; - if (kvm_para_has_feature(KVM_FEATURE_ASYNC_PF) && kvmapf) { u64 pa = slow_virt_to_phys(this_cpu_ptr(&apf_reason)); @@ -625,9 +622,6 @@ static void __init kvm_guest_init(void) { int i; - if (!kvm_para_available()) - return; - paravirt_ops_setup(); register_reboot_notifier(&kvm_pv_reboot_nb); for (i = 0; i < KVM_TASK_SLEEP_HASHSIZE; i++) @@ -848,8 +842,6 @@ asm( */ void __init kvm_spinlock_init(void) { - if (!kvm_para_available()) - return; /* Does host kernel support KVM_FEATURE_PV_UNHALT? */ if (!kvm_para_has_feature(KVM_FEATURE_PV_UNHALT)) return; diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c index 0fdbe89d0754..3c5bbe8e4120 100644 --- a/arch/x86/kernel/ptrace.c +++ b/arch/x86/kernel/ptrace.c @@ -201,6 +201,7 @@ static int set_segment_reg(struct task_struct *task, case offsetof(struct user_regs_struct, ss): if (unlikely(value == 0)) return -EIO; + /* Else, fall through */ default: *pt_regs_access(task_pt_regs(task), offset) = value; diff --git a/arch/x86/kernel/stacktrace.c b/arch/x86/kernel/stacktrace.c index 4f36d3241faf..2d6898c2cb64 100644 --- a/arch/x86/kernel/stacktrace.c +++ b/arch/x86/kernel/stacktrace.c @@ -100,7 +100,7 @@ copy_stack_frame(const void __user *fp, struct stack_frame_user *frame) { int ret; - if (!access_ok(fp, sizeof(*frame))) + if (__range_not_ok(fp, sizeof(*frame), TASK_SIZE)) return 0; ret = 1; diff --git a/arch/x86/kernel/sysfb_efi.c b/arch/x86/kernel/sysfb_efi.c index 8eb67a670b10..653b7f617b61 100644 --- a/arch/x86/kernel/sysfb_efi.c +++ b/arch/x86/kernel/sysfb_efi.c @@ -230,9 +230,55 @@ static const struct dmi_system_id efifb_dmi_system_table[] __initconst = { {}, }; +/* + * Some devices have a portrait LCD but advertise a landscape resolution (and + * pitch). We simply swap width and height for these devices so that we can + * correctly deal with some of them coming with multiple resolutions. + */ +static const struct dmi_system_id efifb_dmi_swap_width_height[] __initconst = { + { + /* + * Lenovo MIIX310-10ICR, only some batches have the troublesome + * 800x1280 portrait screen. Luckily the portrait version has + * its own BIOS version, so we match on that. + */ + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_EXACT_MATCH(DMI_PRODUCT_VERSION, "MIIX 310-10ICR"), + DMI_EXACT_MATCH(DMI_BIOS_VERSION, "1HCN44WW"), + }, + }, + { + /* Lenovo MIIX 320-10ICR with 800x1280 portrait screen */ + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_EXACT_MATCH(DMI_PRODUCT_VERSION, + "Lenovo MIIX 320-10ICR"), + }, + }, + { + /* Lenovo D330 with 800x1280 or 1200x1920 portrait screen */ + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_EXACT_MATCH(DMI_PRODUCT_VERSION, + "Lenovo ideapad D330-10IGM"), + }, + }, + {}, +}; + __init void sysfb_apply_efi_quirks(void) { if (screen_info.orig_video_isVGA != VIDEO_TYPE_EFI || !(screen_info.capabilities & VIDEO_CAPABILITY_SKIP_QUIRKS)) dmi_check_system(efifb_dmi_system_table); + + if (screen_info.orig_video_isVGA == VIDEO_TYPE_EFI && + dmi_check_system(efifb_dmi_swap_width_height)) { + u16 temp = screen_info.lfb_width; + + screen_info.lfb_width = screen_info.lfb_height; + screen_info.lfb_height = temp; + screen_info.lfb_linelength = 4 * screen_info.lfb_width; + } } diff --git a/arch/x86/kvm/debugfs.c b/arch/x86/kvm/debugfs.c index 329361b69d5e..018aebce33ff 100644 --- a/arch/x86/kvm/debugfs.c +++ b/arch/x86/kvm/debugfs.c @@ -8,11 +8,6 @@ #include <linux/debugfs.h> #include "lapic.h" -bool kvm_arch_has_vcpu_debugfs(void) -{ - return true; -} - static int vcpu_get_timer_advance_ns(void *data, u64 *val) { struct kvm_vcpu *vcpu = (struct kvm_vcpu *) data; @@ -48,37 +43,22 @@ static int vcpu_get_tsc_scaling_frac_bits(void *data, u64 *val) DEFINE_SIMPLE_ATTRIBUTE(vcpu_tsc_scaling_frac_fops, vcpu_get_tsc_scaling_frac_bits, NULL, "%llu\n"); -int kvm_arch_create_vcpu_debugfs(struct kvm_vcpu *vcpu) +void kvm_arch_create_vcpu_debugfs(struct kvm_vcpu *vcpu) { - struct dentry *ret; - - ret = debugfs_create_file("tsc-offset", 0444, - vcpu->debugfs_dentry, - vcpu, &vcpu_tsc_offset_fops); - if (!ret) - return -ENOMEM; + debugfs_create_file("tsc-offset", 0444, vcpu->debugfs_dentry, vcpu, + &vcpu_tsc_offset_fops); - if (lapic_in_kernel(vcpu)) { - ret = debugfs_create_file("lapic_timer_advance_ns", 0444, - vcpu->debugfs_dentry, - vcpu, &vcpu_timer_advance_ns_fops); - if (!ret) - return -ENOMEM; - } + if (lapic_in_kernel(vcpu)) + debugfs_create_file("lapic_timer_advance_ns", 0444, + vcpu->debugfs_dentry, vcpu, + &vcpu_timer_advance_ns_fops); if (kvm_has_tsc_control) { - ret = debugfs_create_file("tsc-scaling-ratio", 0444, - vcpu->debugfs_dentry, - vcpu, &vcpu_tsc_scaling_fops); - if (!ret) - return -ENOMEM; - ret = debugfs_create_file("tsc-scaling-ratio-frac-bits", 0444, - vcpu->debugfs_dentry, - vcpu, &vcpu_tsc_scaling_frac_fops); - if (!ret) - return -ENOMEM; - + debugfs_create_file("tsc-scaling-ratio", 0444, + vcpu->debugfs_dentry, vcpu, + &vcpu_tsc_scaling_fops); + debugfs_create_file("tsc-scaling-ratio-frac-bits", 0444, + vcpu->debugfs_dentry, vcpu, + &vcpu_tsc_scaling_frac_fops); } - - return 0; } diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c index 0aa158657f20..685d17c11461 100644 --- a/arch/x86/kvm/lapic.c +++ b/arch/x86/kvm/lapic.c @@ -1548,7 +1548,6 @@ static void kvm_apic_inject_pending_timer_irqs(struct kvm_lapic *apic) static void apic_timer_expired(struct kvm_lapic *apic) { struct kvm_vcpu *vcpu = apic->vcpu; - struct swait_queue_head *q = &vcpu->wq; struct kvm_timer *ktimer = &apic->lapic_timer; if (atomic_read(&apic->lapic_timer.pending)) @@ -1566,13 +1565,6 @@ static void apic_timer_expired(struct kvm_lapic *apic) atomic_inc(&apic->lapic_timer.pending); kvm_set_pending_timer(vcpu); - - /* - * For x86, the atomic_inc() is serialized, thus - * using swait_active() is safe. - */ - if (swait_active(q)) - swake_up_one(q); } static void start_sw_tscdeadline(struct kvm_lapic *apic) diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index 8f72526e2f68..24843cf49579 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -3466,7 +3466,7 @@ static bool fast_page_fault(struct kvm_vcpu *vcpu, gva_t gva, int level, /* * Currently, fast page fault only works for direct mapping * since the gfn is not stable for indirect shadow page. See - * Documentation/virtual/kvm/locking.txt to get more detail. + * Documentation/virt/kvm/locking.txt to get more detail. */ fault_handled = fast_pf_fix_direct_spte(vcpu, sp, iterator.sptep, spte, diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c index 19f69df96758..d685491fce4d 100644 --- a/arch/x86/kvm/svm.c +++ b/arch/x86/kvm/svm.c @@ -2143,12 +2143,20 @@ static struct kvm_vcpu *svm_create_vcpu(struct kvm *kvm, unsigned int id) goto out; } + svm->vcpu.arch.user_fpu = kmem_cache_zalloc(x86_fpu_cache, + GFP_KERNEL_ACCOUNT); + if (!svm->vcpu.arch.user_fpu) { + printk(KERN_ERR "kvm: failed to allocate kvm userspace's fpu\n"); + err = -ENOMEM; + goto free_partial_svm; + } + svm->vcpu.arch.guest_fpu = kmem_cache_zalloc(x86_fpu_cache, GFP_KERNEL_ACCOUNT); if (!svm->vcpu.arch.guest_fpu) { printk(KERN_ERR "kvm: failed to allocate vcpu's fpu\n"); err = -ENOMEM; - goto free_partial_svm; + goto free_user_fpu; } err = kvm_vcpu_init(&svm->vcpu, kvm, id); @@ -2211,6 +2219,8 @@ uninit: kvm_vcpu_uninit(&svm->vcpu); free_svm: kmem_cache_free(x86_fpu_cache, svm->vcpu.arch.guest_fpu); +free_user_fpu: + kmem_cache_free(x86_fpu_cache, svm->vcpu.arch.user_fpu); free_partial_svm: kmem_cache_free(kvm_vcpu_cache, svm); out: @@ -2241,6 +2251,7 @@ static void svm_free_vcpu(struct kvm_vcpu *vcpu) __free_page(virt_to_page(svm->nested.hsave)); __free_pages(virt_to_page(svm->nested.msrpm), MSRPM_ALLOC_ORDER); kvm_vcpu_uninit(vcpu); + kmem_cache_free(x86_fpu_cache, svm->vcpu.arch.user_fpu); kmem_cache_free(x86_fpu_cache, svm->vcpu.arch.guest_fpu); kmem_cache_free(kvm_vcpu_cache, svm); } @@ -5179,6 +5190,11 @@ static void svm_deliver_avic_intr(struct kvm_vcpu *vcpu, int vec) kvm_vcpu_wake_up(vcpu); } +static bool svm_dy_apicv_has_pending_interrupt(struct kvm_vcpu *vcpu) +{ + return false; +} + static void svm_ir_list_del(struct vcpu_svm *svm, struct amd_iommu_pi_data *pi) { unsigned long flags; @@ -7303,6 +7319,7 @@ static struct kvm_x86_ops svm_x86_ops __ro_after_init = { .pmu_ops = &amd_pmu_ops, .deliver_posted_interrupt = svm_deliver_avic_intr, + .dy_apicv_has_pending_interrupt = svm_dy_apicv_has_pending_interrupt, .update_pi_irte = svm_update_pi_irte, .setup_mce = svm_setup_mce, diff --git a/arch/x86/kvm/vmx/nested.c b/arch/x86/kvm/vmx/nested.c index 0f1378789bd0..ced9fba32598 100644 --- a/arch/x86/kvm/vmx/nested.c +++ b/arch/x86/kvm/vmx/nested.c @@ -220,6 +220,8 @@ static void free_nested(struct kvm_vcpu *vcpu) if (!vmx->nested.vmxon && !vmx->nested.smm.vmxon) return; + kvm_clear_request(KVM_REQ_GET_VMCS12_PAGES, vcpu); + vmx->nested.vmxon = false; vmx->nested.smm.vmxon = false; free_vpid(vmx->nested.vpid02); @@ -232,7 +234,9 @@ static void free_nested(struct kvm_vcpu *vcpu) vmx->vmcs01.shadow_vmcs = NULL; } kfree(vmx->nested.cached_vmcs12); + vmx->nested.cached_vmcs12 = NULL; kfree(vmx->nested.cached_shadow_vmcs12); + vmx->nested.cached_shadow_vmcs12 = NULL; /* Unpin physical memory we referred to in the vmcs02 */ if (vmx->nested.apic_access_page) { kvm_release_page_dirty(vmx->nested.apic_access_page); diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c index a279447eb75b..42ed3faa6af8 100644 --- a/arch/x86/kvm/vmx/vmx.c +++ b/arch/x86/kvm/vmx/vmx.c @@ -6117,6 +6117,11 @@ static int vmx_sync_pir_to_irr(struct kvm_vcpu *vcpu) return max_irr; } +static bool vmx_dy_apicv_has_pending_interrupt(struct kvm_vcpu *vcpu) +{ + return pi_test_on(vcpu_to_pi_desc(vcpu)); +} + static void vmx_load_eoi_exitmap(struct kvm_vcpu *vcpu, u64 *eoi_exit_bitmap) { if (!kvm_vcpu_apicv_active(vcpu)) @@ -6598,6 +6603,7 @@ static void vmx_free_vcpu(struct kvm_vcpu *vcpu) free_loaded_vmcs(vmx->loaded_vmcs); kfree(vmx->guest_msrs); kvm_vcpu_uninit(vcpu); + kmem_cache_free(x86_fpu_cache, vmx->vcpu.arch.user_fpu); kmem_cache_free(x86_fpu_cache, vmx->vcpu.arch.guest_fpu); kmem_cache_free(kvm_vcpu_cache, vmx); } @@ -6613,12 +6619,20 @@ static struct kvm_vcpu *vmx_create_vcpu(struct kvm *kvm, unsigned int id) if (!vmx) return ERR_PTR(-ENOMEM); + vmx->vcpu.arch.user_fpu = kmem_cache_zalloc(x86_fpu_cache, + GFP_KERNEL_ACCOUNT); + if (!vmx->vcpu.arch.user_fpu) { + printk(KERN_ERR "kvm: failed to allocate kvm userspace's fpu\n"); + err = -ENOMEM; + goto free_partial_vcpu; + } + vmx->vcpu.arch.guest_fpu = kmem_cache_zalloc(x86_fpu_cache, GFP_KERNEL_ACCOUNT); if (!vmx->vcpu.arch.guest_fpu) { printk(KERN_ERR "kvm: failed to allocate vcpu's fpu\n"); err = -ENOMEM; - goto free_partial_vcpu; + goto free_user_fpu; } vmx->vpid = allocate_vpid(); @@ -6721,6 +6735,8 @@ uninit_vcpu: free_vcpu: free_vpid(vmx->vpid); kmem_cache_free(x86_fpu_cache, vmx->vcpu.arch.guest_fpu); +free_user_fpu: + kmem_cache_free(x86_fpu_cache, vmx->vcpu.arch.user_fpu); free_partial_vcpu: kmem_cache_free(kvm_vcpu_cache, vmx); return ERR_PTR(err); @@ -7715,6 +7731,7 @@ static struct kvm_x86_ops vmx_x86_ops __ro_after_init = { .guest_apic_has_interrupt = vmx_guest_apic_has_interrupt, .sync_pir_to_irr = vmx_sync_pir_to_irr, .deliver_posted_interrupt = vmx_deliver_posted_interrupt, + .dy_apicv_has_pending_interrupt = vmx_dy_apicv_has_pending_interrupt, .set_tss_addr = vmx_set_tss_addr, .set_identity_map_addr = vmx_set_identity_map_addr, diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 58305cf81182..93b0bd45ac73 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -3306,6 +3306,10 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu) kvm_x86_ops->vcpu_load(vcpu, cpu); + fpregs_assert_state_consistent(); + if (test_thread_flag(TIF_NEED_FPU_LOAD)) + switch_fpu_return(); + /* Apply any externally detected TSC adjustments (due to suspend) */ if (unlikely(vcpu->arch.tsc_offset_adjustment)) { adjust_tsc_offset_host(vcpu, vcpu->arch.tsc_offset_adjustment); @@ -7202,7 +7206,7 @@ static void kvm_sched_yield(struct kvm *kvm, unsigned long dest_id) rcu_read_unlock(); - if (target) + if (target && READ_ONCE(target->ready)) kvm_vcpu_yield_to(target); } @@ -7242,6 +7246,7 @@ int kvm_emulate_hypercall(struct kvm_vcpu *vcpu) break; case KVM_HC_KICK_CPU: kvm_pv_kick_cpu_op(vcpu->kvm, a0, a1); + kvm_sched_yield(vcpu->kvm, a1); ret = 0; break; #ifdef CONFIG_X86_64 @@ -7990,9 +7995,8 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu) trace_kvm_entry(vcpu->vcpu_id); guest_enter_irqoff(); - fpregs_assert_state_consistent(); - if (test_thread_flag(TIF_NEED_FPU_LOAD)) - switch_fpu_return(); + /* The preempt notifier should have taken care of the FPU already. */ + WARN_ON_ONCE(test_thread_flag(TIF_NEED_FPU_LOAD)); if (unlikely(vcpu->arch.switch_db_regs)) { set_debugreg(0, 7); @@ -8270,7 +8274,7 @@ static void kvm_load_guest_fpu(struct kvm_vcpu *vcpu) { fpregs_lock(); - copy_fpregs_to_fpstate(¤t->thread.fpu); + copy_fpregs_to_fpstate(vcpu->arch.user_fpu); /* PKRU is separately restored in kvm_x86_ops->run. */ __copy_kernel_to_fpregs(&vcpu->arch.guest_fpu->state, ~XFEATURE_MASK_PKRU); @@ -8287,7 +8291,7 @@ static void kvm_put_guest_fpu(struct kvm_vcpu *vcpu) fpregs_lock(); copy_fpregs_to_fpstate(vcpu->arch.guest_fpu); - copy_kernel_to_fpregs(¤t->thread.fpu.state); + copy_kernel_to_fpregs(&vcpu->arch.user_fpu->state); fpregs_mark_activate(); fpregs_unlock(); @@ -9694,6 +9698,22 @@ int kvm_arch_vcpu_runnable(struct kvm_vcpu *vcpu) return kvm_vcpu_running(vcpu) || kvm_vcpu_has_events(vcpu); } +bool kvm_arch_dy_runnable(struct kvm_vcpu *vcpu) +{ + if (READ_ONCE(vcpu->arch.pv.pv_unhalted)) + return true; + + if (kvm_test_request(KVM_REQ_NMI, vcpu) || + kvm_test_request(KVM_REQ_SMI, vcpu) || + kvm_test_request(KVM_REQ_EVENT, vcpu)) + return true; + + if (vcpu->arch.apicv_active && kvm_x86_ops->dy_apicv_has_pending_interrupt(vcpu)) + return true; + + return false; +} + bool kvm_arch_vcpu_in_kernel(struct kvm_vcpu *vcpu) { return vcpu->arch.preempted_in_kernel; diff --git a/arch/x86/lib/cpu.c b/arch/x86/lib/cpu.c index 04967cdce5d1..7ad68917a51e 100644 --- a/arch/x86/lib/cpu.c +++ b/arch/x86/lib/cpu.c @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0-only #include <linux/types.h> #include <linux/export.h> +#include <asm/cpu.h> unsigned int x86_family(unsigned int sig) { diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c index 6c46095cd0d9..9ceacd1156db 100644 --- a/arch/x86/mm/fault.c +++ b/arch/x86/mm/fault.c @@ -177,13 +177,14 @@ static inline pmd_t *vmalloc_sync_one(pgd_t *pgd, unsigned long address) pmd = pmd_offset(pud, address); pmd_k = pmd_offset(pud_k, address); - if (!pmd_present(*pmd_k)) - return NULL; - if (!pmd_present(*pmd)) + if (pmd_present(*pmd) != pmd_present(*pmd_k)) set_pmd(pmd, *pmd_k); + + if (!pmd_present(*pmd_k)) + return NULL; else - BUG_ON(pmd_page(*pmd) != pmd_page(*pmd_k)); + BUG_ON(pmd_pfn(*pmd) != pmd_pfn(*pmd_k)); return pmd_k; } @@ -203,17 +204,13 @@ void vmalloc_sync_all(void) spin_lock(&pgd_lock); list_for_each_entry(page, &pgd_list, lru) { spinlock_t *pgt_lock; - pmd_t *ret; /* the pgt_lock only for Xen */ pgt_lock = &pgd_page_get_mm(page)->page_table_lock; spin_lock(pgt_lock); - ret = vmalloc_sync_one(page_address(page), address); + vmalloc_sync_one(page_address(page), address); spin_unlock(pgt_lock); - - if (!ret) - break; } spin_unlock(&pgd_lock); } diff --git a/arch/x86/purgatory/Makefile b/arch/x86/purgatory/Makefile index 3cf302b26332..8901a1f89cf5 100644 --- a/arch/x86/purgatory/Makefile +++ b/arch/x86/purgatory/Makefile @@ -6,6 +6,9 @@ purgatory-y := purgatory.o stack.o setup-x86_$(BITS).o sha256.o entry64.o string targets += $(purgatory-y) PURGATORY_OBJS = $(addprefix $(obj)/,$(purgatory-y)) +$(obj)/string.o: $(srctree)/arch/x86/boot/compressed/string.c FORCE + $(call if_changed_rule,cc_o_c) + $(obj)/sha256.o: $(srctree)/lib/sha256.c FORCE $(call if_changed_rule,cc_o_c) @@ -17,11 +20,34 @@ KCOV_INSTRUMENT := n # Default KBUILD_CFLAGS can have -pg option set when FTRACE is enabled. That # in turn leaves some undefined symbols like __fentry__ in purgatory and not -# sure how to relocate those. Like kexec-tools, use custom flags. - -KBUILD_CFLAGS := -fno-strict-aliasing -Wall -Wstrict-prototypes -fno-zero-initialized-in-bss -fno-builtin -ffreestanding -c -Os -mcmodel=large -KBUILD_CFLAGS += -m$(BITS) -KBUILD_CFLAGS += $(call cc-option,-fno-PIE) +# sure how to relocate those. +ifdef CONFIG_FUNCTION_TRACER +CFLAGS_REMOVE_sha256.o += $(CC_FLAGS_FTRACE) +CFLAGS_REMOVE_purgatory.o += $(CC_FLAGS_FTRACE) +CFLAGS_REMOVE_string.o += $(CC_FLAGS_FTRACE) +CFLAGS_REMOVE_kexec-purgatory.o += $(CC_FLAGS_FTRACE) +endif + +ifdef CONFIG_STACKPROTECTOR +CFLAGS_REMOVE_sha256.o += -fstack-protector +CFLAGS_REMOVE_purgatory.o += -fstack-protector +CFLAGS_REMOVE_string.o += -fstack-protector +CFLAGS_REMOVE_kexec-purgatory.o += -fstack-protector +endif + +ifdef CONFIG_STACKPROTECTOR_STRONG +CFLAGS_REMOVE_sha256.o += -fstack-protector-strong +CFLAGS_REMOVE_purgatory.o += -fstack-protector-strong +CFLAGS_REMOVE_string.o += -fstack-protector-strong +CFLAGS_REMOVE_kexec-purgatory.o += -fstack-protector-strong +endif + +ifdef CONFIG_RETPOLINE +CFLAGS_REMOVE_sha256.o += $(RETPOLINE_CFLAGS) +CFLAGS_REMOVE_purgatory.o += $(RETPOLINE_CFLAGS) +CFLAGS_REMOVE_string.o += $(RETPOLINE_CFLAGS) +CFLAGS_REMOVE_kexec-purgatory.o += $(RETPOLINE_CFLAGS) +endif $(obj)/purgatory.ro: $(PURGATORY_OBJS) FORCE $(call if_changed,ld) diff --git a/arch/x86/purgatory/purgatory.c b/arch/x86/purgatory/purgatory.c index 6d8d5a34c377..b607bda786f6 100644 --- a/arch/x86/purgatory/purgatory.c +++ b/arch/x86/purgatory/purgatory.c @@ -68,3 +68,9 @@ void purgatory(void) } copy_backup_region(); } + +/* + * Defined in order to reuse memcpy() and memset() from + * arch/x86/boot/compressed/string.c + */ +void warn(const char *msg) {} diff --git a/arch/x86/purgatory/string.c b/arch/x86/purgatory/string.c deleted file mode 100644 index 01ad43873ad9..000000000000 --- a/arch/x86/purgatory/string.c +++ /dev/null @@ -1,23 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Simple string functions. - * - * Copyright (C) 2014 Red Hat Inc. - * - * Author: - * Vivek Goyal <vgoyal@redhat.com> - */ - -#include <linux/types.h> - -#include "../boot/string.c" - -void *memcpy(void *dst, const void *src, size_t len) -{ - return __builtin_memcpy(dst, src, len); -} - -void *memset(void *dst, int c, size_t len) -{ - return __builtin_memset(dst, c, len); -} diff --git a/arch/xtensa/kernel/coprocessor.S b/arch/xtensa/kernel/coprocessor.S index 60c220020054..80828b95a51f 100644 --- a/arch/xtensa/kernel/coprocessor.S +++ b/arch/xtensa/kernel/coprocessor.S @@ -14,6 +14,7 @@ #include <linux/linkage.h> #include <asm/asm-offsets.h> +#include <asm/asmmacro.h> #include <asm/processor.h> #include <asm/coprocessor.h> #include <asm/thread_info.h> |