diff options
Diffstat (limited to 'arch')
42 files changed, 133 insertions, 1720 deletions
diff --git a/arch/ia64/hp/sim/simeth.c b/arch/ia64/hp/sim/simeth.c index be769ef326a2..424e9257c9a0 100644 --- a/arch/ia64/hp/sim/simeth.c +++ b/arch/ia64/hp/sim/simeth.c @@ -87,7 +87,7 @@ static int simeth_debug; /* set to 1 to get debug information */ */ static struct notifier_block simeth_dev_notifier = { simeth_device_event, - 0 + NULL }; diff --git a/arch/ia64/hp/sim/simscsi.c b/arch/ia64/hp/sim/simscsi.c index 8f0a16a79a67..bb87682bbb1b 100644 --- a/arch/ia64/hp/sim/simscsi.c +++ b/arch/ia64/hp/sim/simscsi.c @@ -103,7 +103,7 @@ simscsi_interrupt (unsigned long val) while ((sc = queue[rd].sc) != 0) { atomic_dec(&num_reqs); - queue[rd].sc = 0; + queue[rd].sc = NULL; if (DBG) printk("simscsi_interrupt: done with %ld\n", sc->serial_number); (*sc->scsi_done)(sc); diff --git a/arch/ia64/hp/sim/simserial.c b/arch/ia64/hp/sim/simserial.c index 5095778be53c..caab986af70c 100644 --- a/arch/ia64/hp/sim/simserial.c +++ b/arch/ia64/hp/sim/simserial.c @@ -92,7 +92,7 @@ static struct serial_uart_config uart_config[] = { { "ST16650V2", 32, UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH }, { "TI16750", 64, UART_CLEAR_FIFO | UART_USE_FIFO}, - { 0, 0} + { NULL, 0} }; struct tty_driver *hp_simserial_driver; @@ -555,7 +555,7 @@ static void shutdown(struct async_struct * info) if (info->xmit.buf) { free_page((unsigned long) info->xmit.buf); - info->xmit.buf = 0; + info->xmit.buf = NULL; } if (info->tty) set_bit(TTY_IO_ERROR, &info->tty->flags); @@ -628,7 +628,7 @@ static void rs_close(struct tty_struct *tty, struct file * filp) if (tty->driver->flush_buffer) tty->driver->flush_buffer(tty); if (tty->ldisc.flush_buffer) tty->ldisc.flush_buffer(tty); info->event = 0; - info->tty = 0; + info->tty = NULL; if (info->blocked_open) { if (info->close_delay) schedule_timeout_interruptible(info->close_delay); @@ -668,7 +668,7 @@ static void rs_hangup(struct tty_struct *tty) info->event = 0; state->count = 0; info->flags &= ~ASYNC_NORMAL_ACTIVE; - info->tty = 0; + info->tty = NULL; wake_up_interruptible(&info->open_wait); } @@ -769,7 +769,7 @@ startup(struct async_struct *info) /* * Insert serial port into IRQ chain. */ - info->prev_port = 0; + info->prev_port = NULL; info->next_port = IRQ_ports[state->irq]; if (info->next_port) info->next_port->prev_port = info; diff --git a/arch/ia64/sn/pci/pcibr/pcibr_ate.c b/arch/ia64/sn/pci/pcibr/pcibr_ate.c index 5eb1e1e078b4..935029fc400d 100644 --- a/arch/ia64/sn/pci/pcibr/pcibr_ate.c +++ b/arch/ia64/sn/pci/pcibr/pcibr_ate.c @@ -126,7 +126,7 @@ int pcibr_ate_alloc(struct pcibus_info *pcibus_info, int count) * Setup an Address Translation Entry as specified. Use either the Bridge * internal maps or the external map RAM, as appropriate. */ -static inline u64 *pcibr_ate_addr(struct pcibus_info *pcibus_info, +static inline u64 __iomem *pcibr_ate_addr(struct pcibus_info *pcibus_info, int ate_index) { if (ate_index < pcibus_info->pbi_int_ate_size) { diff --git a/arch/ia64/sn/pci/tioce_provider.c b/arch/ia64/sn/pci/tioce_provider.c index 0e81f68aaf8e..46e16dcf5971 100644 --- a/arch/ia64/sn/pci/tioce_provider.c +++ b/arch/ia64/sn/pci/tioce_provider.c @@ -53,7 +53,7 @@ */ static void inline -tioce_mmr_war_pre(struct tioce_kernel *kern, void *mmr_addr) +tioce_mmr_war_pre(struct tioce_kernel *kern, void __iomem *mmr_addr) { u64 mmr_base; u64 mmr_offset; @@ -62,7 +62,7 @@ tioce_mmr_war_pre(struct tioce_kernel *kern, void *mmr_addr) return; mmr_base = kern->ce_common->ce_pcibus.bs_base; - mmr_offset = (u64)mmr_addr - mmr_base; + mmr_offset = (unsigned long)mmr_addr - mmr_base; if (mmr_offset < 0x45000) { u64 mmr_war_offset; @@ -79,7 +79,7 @@ tioce_mmr_war_pre(struct tioce_kernel *kern, void *mmr_addr) } static void inline -tioce_mmr_war_post(struct tioce_kernel *kern, void *mmr_addr) +tioce_mmr_war_post(struct tioce_kernel *kern, void __iomem *mmr_addr) { u64 mmr_base; u64 mmr_offset; @@ -88,7 +88,7 @@ tioce_mmr_war_post(struct tioce_kernel *kern, void *mmr_addr) return; mmr_base = kern->ce_common->ce_pcibus.bs_base; - mmr_offset = (u64)mmr_addr - mmr_base; + mmr_offset = (unsigned long)mmr_addr - mmr_base; if (mmr_offset < 0x45000) { if (mmr_offset == 0x100) @@ -223,7 +223,7 @@ tioce_dma_d64(unsigned long ct_addr, int dma_flags) * @pci_dev. */ static inline void -pcidev_to_tioce(struct pci_dev *pdev, struct tioce **base, +pcidev_to_tioce(struct pci_dev *pdev, struct tioce __iomem **base, struct tioce_kernel **kernel, int *port) { struct pcidev_info *pcidev_info; @@ -235,7 +235,7 @@ pcidev_to_tioce(struct pci_dev *pdev, struct tioce **base, ce_kernel = (struct tioce_kernel *)ce_common->ce_kernel_private; if (base) - *base = (struct tioce *)ce_common->ce_pcibus.bs_base; + *base = (struct tioce __iomem *)ce_common->ce_pcibus.bs_base; if (kernel) *kernel = ce_kernel; @@ -275,13 +275,13 @@ tioce_alloc_map(struct tioce_kernel *ce_kern, int type, int port, u64 pagesize; int msi_capable, msi_wanted; u64 *ate_shadow; - u64 *ate_reg; + u64 __iomem *ate_reg; u64 addr; - struct tioce *ce_mmr; + struct tioce __iomem *ce_mmr; u64 bus_base; struct tioce_dmamap *map; - ce_mmr = (struct tioce *)ce_kern->ce_common->ce_pcibus.bs_base; + ce_mmr = (struct tioce __iomem *)ce_kern->ce_common->ce_pcibus.bs_base; switch (type) { case TIOCE_ATE_M32: @@ -386,7 +386,7 @@ tioce_dma_d32(struct pci_dev *pdev, u64 ct_addr, int dma_flags) { int dma_ok; int port; - struct tioce *ce_mmr; + struct tioce __iomem *ce_mmr; struct tioce_kernel *ce_kern; u64 ct_upper; u64 ct_lower; @@ -461,7 +461,7 @@ tioce_dma_unmap(struct pci_dev *pdev, dma_addr_t bus_addr, int dir) int i; int port; struct tioce_kernel *ce_kern; - struct tioce *ce_mmr; + struct tioce __iomem *ce_mmr; unsigned long flags; bus_addr = tioce_dma_barrier(bus_addr, 0); @@ -700,9 +700,9 @@ static void tioce_reserve_m32(struct tioce_kernel *ce_kern, u64 base, u64 limit) { int ate_index, last_ate, ps; - struct tioce *ce_mmr; + struct tioce __iomem *ce_mmr; - ce_mmr = (struct tioce *)ce_kern->ce_common->ce_pcibus.bs_base; + ce_mmr = (struct tioce __iomem *)ce_kern->ce_common->ce_pcibus.bs_base; ps = ce_kern->ce_ate3240_pagesize; ate_index = ATE_PAGE(base, ps); last_ate = ate_index + ATE_NPAGES(base, limit-base+1, ps) - 1; @@ -736,7 +736,7 @@ tioce_kern_init(struct tioce_common *tioce_common) int dev; u32 tmp; unsigned int seg, bus; - struct tioce *tioce_mmr; + struct tioce __iomem *tioce_mmr; struct tioce_kernel *tioce_kern; tioce_kern = kzalloc(sizeof(struct tioce_kernel), GFP_KERNEL); @@ -767,7 +767,7 @@ tioce_kern_init(struct tioce_common *tioce_common) * the ate's. */ - tioce_mmr = (struct tioce *)tioce_common->ce_pcibus.bs_base; + tioce_mmr = (struct tioce __iomem *)tioce_common->ce_pcibus.bs_base; tioce_mmr_clri(tioce_kern, &tioce_mmr->ce_ure_page_map, CE_URE_PAGESIZE_MASK); tioce_mmr_seti(tioce_kern, &tioce_mmr->ce_ure_page_map, @@ -858,7 +858,7 @@ tioce_force_interrupt(struct sn_irq_info *sn_irq_info) struct pcidev_info *pcidev_info; struct tioce_common *ce_common; struct tioce_kernel *ce_kern; - struct tioce *ce_mmr; + struct tioce __iomem *ce_mmr; u64 force_int_val; if (!sn_irq_info->irq_bridge) @@ -872,7 +872,7 @@ tioce_force_interrupt(struct sn_irq_info *sn_irq_info) return; ce_common = (struct tioce_common *)pcidev_info->pdi_pcibus_info; - ce_mmr = (struct tioce *)ce_common->ce_pcibus.bs_base; + ce_mmr = (struct tioce __iomem *)ce_common->ce_pcibus.bs_base; ce_kern = (struct tioce_kernel *)ce_common->ce_kernel_private; /* @@ -953,7 +953,7 @@ tioce_target_interrupt(struct sn_irq_info *sn_irq_info) struct pcidev_info *pcidev_info; struct tioce_common *ce_common; struct tioce_kernel *ce_kern; - struct tioce *ce_mmr; + struct tioce __iomem *ce_mmr; int bit; u64 vector; @@ -962,7 +962,7 @@ tioce_target_interrupt(struct sn_irq_info *sn_irq_info) return; ce_common = (struct tioce_common *)pcidev_info->pdi_pcibus_info; - ce_mmr = (struct tioce *)ce_common->ce_pcibus.bs_base; + ce_mmr = (struct tioce __iomem *)ce_common->ce_pcibus.bs_base; ce_kern = (struct tioce_kernel *)ce_common->ce_kernel_private; bit = sn_irq_info->irq_int_bit; @@ -994,7 +994,7 @@ tioce_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *cont cnodeid_t my_cnode, mem_cnode; struct tioce_common *tioce_common; struct tioce_kernel *tioce_kern; - struct tioce *tioce_mmr; + struct tioce __iomem *tioce_mmr; /* * Allocate kernel bus soft and copy from prom. @@ -1018,7 +1018,7 @@ tioce_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *cont * interrupt handler. */ - tioce_mmr = (struct tioce *)tioce_common->ce_pcibus.bs_base; + tioce_mmr = (struct tioce __iomem *)tioce_common->ce_pcibus.bs_base; tioce_mmr_seti(tioce_kern, &tioce_mmr->ce_adm_int_status_alias, ~0ULL); tioce_mmr_seti(tioce_kern, &tioce_mmr->ce_adm_error_summary_alias, ~0ULL); diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 731b942a824b..14af6cce2fa2 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1010,11 +1010,6 @@ endchoice config ARC32 bool -config AU1X00_USB_DEVICE - bool - depends on MIPS_PB1500 || MIPS_PB1100 || MIPS_PB1000 - default n - config BOOT_ELF32 bool diff --git a/arch/mips/au1000/common/Makefile b/arch/mips/au1000/common/Makefile index bf682f50b859..4c35525edb4f 100644 --- a/arch/mips/au1000/common/Makefile +++ b/arch/mips/au1000/common/Makefile @@ -10,6 +10,5 @@ obj-y += prom.o irq.o puts.o time.o reset.o \ au1xxx_irqmap.o clocks.o platform.o power.o setup.o \ sleeper.o cputable.o dma.o dbdma.o gpio.o -obj-$(CONFIG_AU1X00_USB_DEVICE) += usbdev.o obj-$(CONFIG_KGDB) += dbg_io.o obj-$(CONFIG_PCI) += pci.o diff --git a/arch/mips/au1000/common/usbdev.c b/arch/mips/au1000/common/usbdev.c deleted file mode 100644 index 70dc82e536cd..000000000000 --- a/arch/mips/au1000/common/usbdev.c +++ /dev/null @@ -1,1552 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * Au1000 USB Device-Side (device layer) - * - * Copyright 2001-2002 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * stevel@mvista.com or source@mvista.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include <linux/kernel.h> -#include <linux/ioport.h> -#include <linux/sched.h> -#include <linux/signal.h> -#include <linux/errno.h> -#include <linux/poll.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/fcntl.h> -#include <linux/module.h> -#include <linux/spinlock.h> -#include <linux/list.h> -#include <linux/smp_lock.h> -#define DEBUG -#include <linux/usb.h> - -#include <asm/io.h> -#include <asm/uaccess.h> -#include <asm/irq.h> -#include <asm/mipsregs.h> -#include <asm/au1000.h> -#include <asm/au1000_dma.h> -#include <asm/au1000_usbdev.h> - -#ifdef DEBUG -#undef VDEBUG -#ifdef VDEBUG -#define vdbg(fmt, arg...) printk(KERN_DEBUG __FILE__ ": " fmt "\n" , ## arg) -#else -#define vdbg(fmt, arg...) do {} while (0) -#endif -#else -#define vdbg(fmt, arg...) do {} while (0) -#endif - -#define ALLOC_FLAGS (in_interrupt () ? GFP_ATOMIC : GFP_KERNEL) - -#define EP_FIFO_DEPTH 8 - -typedef enum { - SETUP_STAGE = 0, - DATA_STAGE, - STATUS_STAGE -} ep0_stage_t; - -typedef struct { - int read_fifo; - int write_fifo; - int ctrl_stat; - int read_fifo_status; - int write_fifo_status; -} endpoint_reg_t; - -typedef struct { - usbdev_pkt_t *head; - usbdev_pkt_t *tail; - int count; -} pkt_list_t; - -typedef struct { - int active; - struct usb_endpoint_descriptor *desc; - endpoint_reg_t *reg; - /* Only one of these are used, unless this is the control ep */ - pkt_list_t inlist; - pkt_list_t outlist; - unsigned int indma, outdma; /* DMA channel numbers for IN, OUT */ - /* following are extracted from endpoint descriptor for easy access */ - int max_pkt_size; - int type; - int direction; - /* WE assign endpoint addresses! */ - int address; - spinlock_t lock; -} endpoint_t; - - -static struct usb_dev { - endpoint_t ep[6]; - ep0_stage_t ep0_stage; - - struct usb_device_descriptor * dev_desc; - struct usb_interface_descriptor* if_desc; - struct usb_config_descriptor * conf_desc; - u8 * full_conf_desc; - struct usb_string_descriptor * str_desc[6]; - - /* callback to function layer */ - void (*func_cb)(usbdev_cb_type_t type, unsigned long arg, - void *cb_data); - void* cb_data; - - usbdev_state_t state; // device state - int suspended; // suspended flag - int address; // device address - int interface; - int num_ep; - u8 alternate_setting; - u8 configuration; // configuration value - int remote_wakeup_en; -} usbdev; - - -static endpoint_reg_t ep_reg[] = { - // FIFO's 0 and 1 are EP0 default control - {USBD_EP0RD, USBD_EP0WR, USBD_EP0CS, USBD_EP0RDSTAT, USBD_EP0WRSTAT }, - {0}, - // FIFO 2 is EP2, IN - { -1, USBD_EP2WR, USBD_EP2CS, -1, USBD_EP2WRSTAT }, - // FIFO 3 is EP3, IN - { -1, USBD_EP3WR, USBD_EP3CS, -1, USBD_EP3WRSTAT }, - // FIFO 4 is EP4, OUT - {USBD_EP4RD, -1, USBD_EP4CS, USBD_EP4RDSTAT, -1 }, - // FIFO 5 is EP5, OUT - {USBD_EP5RD, -1, USBD_EP5CS, USBD_EP5RDSTAT, -1 } -}; - -static struct { - unsigned int id; - const char *str; -} ep_dma_id[] = { - { DMA_ID_USBDEV_EP0_TX, "USBDev EP0 IN" }, - { DMA_ID_USBDEV_EP0_RX, "USBDev EP0 OUT" }, - { DMA_ID_USBDEV_EP2_TX, "USBDev EP2 IN" }, - { DMA_ID_USBDEV_EP3_TX, "USBDev EP3 IN" }, - { DMA_ID_USBDEV_EP4_RX, "USBDev EP4 OUT" }, - { DMA_ID_USBDEV_EP5_RX, "USBDev EP5 OUT" } -}; - -#define DIR_OUT 0 -#define DIR_IN (1<<3) - -#define CONTROL_EP USB_ENDPOINT_XFER_CONTROL -#define BULK_EP USB_ENDPOINT_XFER_BULK - -static inline endpoint_t * -epaddr_to_ep(struct usb_dev* dev, int ep_addr) -{ - if (ep_addr >= 0 && ep_addr < 2) - return &dev->ep[0]; - if (ep_addr < 6) - return &dev->ep[ep_addr]; - return NULL; -} - -static const char* std_req_name[] = { - "GET_STATUS", - "CLEAR_FEATURE", - "RESERVED", - "SET_FEATURE", - "RESERVED", - "SET_ADDRESS", - "GET_DESCRIPTOR", - "SET_DESCRIPTOR", - "GET_CONFIGURATION", - "SET_CONFIGURATION", - "GET_INTERFACE", - "SET_INTERFACE", - "SYNCH_FRAME" -}; - -static inline const char* -get_std_req_name(int req) -{ - return (req >= 0 && req <= 12) ? std_req_name[req] : "UNKNOWN"; -} - -#if 0 -static void -dump_setup(struct usb_ctrlrequest* s) -{ - dbg("%s: requesttype=%d", __FUNCTION__, s->requesttype); - dbg("%s: request=%d %s", __FUNCTION__, s->request, - get_std_req_name(s->request)); - dbg("%s: value=0x%04x", __FUNCTION__, s->wValue); - dbg("%s: index=%d", __FUNCTION__, s->index); - dbg("%s: length=%d", __FUNCTION__, s->length); -} -#endif - -static inline usbdev_pkt_t * -alloc_packet(endpoint_t * ep, int data_size, void* data) -{ - usbdev_pkt_t* pkt = kmalloc(sizeof(usbdev_pkt_t) + data_size, - ALLOC_FLAGS); - if (!pkt) - return NULL; - pkt->ep_addr = ep->address; - pkt->size = data_size; - pkt->status = 0; - pkt->next = NULL; - if (data) - memcpy(pkt->payload, data, data_size); - - return pkt; -} - - -/* - * Link a packet to the tail of the enpoint's packet list. - * EP spinlock must be held when calling. - */ -static void -link_tail(endpoint_t * ep, pkt_list_t * list, usbdev_pkt_t * pkt) -{ - if (!list->tail) { - list->head = list->tail = pkt; - list->count = 1; - } else { - list->tail->next = pkt; - list->tail = pkt; - list->count++; - } -} - -/* - * Unlink and return a packet from the head of the given packet - * list. It is the responsibility of the caller to free the packet. - * EP spinlock must be held when calling. - */ -static usbdev_pkt_t * -unlink_head(pkt_list_t * list) -{ - usbdev_pkt_t *pkt; - - pkt = list->head; - if (!pkt || !list->count) { - return NULL; - } - - list->head = pkt->next; - if (!list->head) { - list->head = list->tail = NULL; - list->count = 0; - } else - list->count--; - - return pkt; -} - -/* - * Create and attach a new packet to the tail of the enpoint's - * packet list. EP spinlock must be held when calling. - */ -static usbdev_pkt_t * -add_packet(endpoint_t * ep, pkt_list_t * list, int size) -{ - usbdev_pkt_t *pkt = alloc_packet(ep, size, NULL); - if (!pkt) - return NULL; - - link_tail(ep, list, pkt); - return pkt; -} - - -/* - * Unlink and free a packet from the head of the enpoint's - * packet list. EP spinlock must be held when calling. - */ -static inline void -free_packet(pkt_list_t * list) -{ - kfree(unlink_head(list)); -} - -/* EP spinlock must be held when calling. */ -static inline void -flush_pkt_list(pkt_list_t * list) -{ - while (list->count) - free_packet(list); -} - -/* EP spinlock must be held when calling */ -static inline void -flush_write_fifo(endpoint_t * ep) -{ - if (ep->reg->write_fifo_status >= 0) { - au_writel(USBDEV_FSTAT_FLUSH | USBDEV_FSTAT_UF | - USBDEV_FSTAT_OF, - ep->reg->write_fifo_status); - //udelay(100); - //au_writel(USBDEV_FSTAT_UF | USBDEV_FSTAT_OF, - // ep->reg->write_fifo_status); - } -} - -/* EP spinlock must be held when calling */ -static inline void -flush_read_fifo(endpoint_t * ep) -{ - if (ep->reg->read_fifo_status >= 0) { - au_writel(USBDEV_FSTAT_FLUSH | USBDEV_FSTAT_UF | - USBDEV_FSTAT_OF, - ep->reg->read_fifo_status); - //udelay(100); - //au_writel(USBDEV_FSTAT_UF | USBDEV_FSTAT_OF, - // ep->reg->read_fifo_status); - } -} - - -/* EP spinlock must be held when calling. */ -static void -endpoint_flush(endpoint_t * ep) -{ - // First, flush all packets - flush_pkt_list(&ep->inlist); - flush_pkt_list(&ep->outlist); - - // Now flush the endpoint's h/w FIFO(s) - flush_write_fifo(ep); - flush_read_fifo(ep); -} - -/* EP spinlock must be held when calling. */ -static void -endpoint_stall(endpoint_t * ep) -{ - u32 cs; - - warn("%s", __FUNCTION__); - - cs = au_readl(ep->reg->ctrl_stat) | USBDEV_CS_STALL; - au_writel(cs, ep->reg->ctrl_stat); -} - -/* EP spinlock must be held when calling. */ -static void -endpoint_unstall(endpoint_t * ep) -{ - u32 cs; - - warn("%s", __FUNCTION__); - - cs = au_readl(ep->reg->ctrl_stat) & ~USBDEV_CS_STALL; - au_writel(cs, ep->reg->ctrl_stat); -} - -static void -endpoint_reset_datatoggle(endpoint_t * ep) -{ - // FIXME: is this possible? -} - - -/* EP spinlock must be held when calling. */ -static int -endpoint_fifo_read(endpoint_t * ep) -{ - int read_count = 0; - u8 *bufptr; - usbdev_pkt_t *pkt = ep->outlist.tail; - - if (!pkt) - return -EINVAL; - - bufptr = &pkt->payload[pkt->size]; - while (au_readl(ep->reg->read_fifo_status) & USBDEV_FSTAT_FCNT_MASK) { - *bufptr++ = au_readl(ep->reg->read_fifo) & 0xff; - read_count++; - pkt->size++; - } - - return read_count; -} - -#if 0 -/* EP spinlock must be held when calling. */ -static int -endpoint_fifo_write(endpoint_t * ep, int index) -{ - int write_count = 0; - u8 *bufptr; - usbdev_pkt_t *pkt = ep->inlist.head; - - if (!pkt) - return -EINVAL; - - bufptr = &pkt->payload[index]; - while ((au_readl(ep->reg->write_fifo_status) & - USBDEV_FSTAT_FCNT_MASK) < EP_FIFO_DEPTH) { - if (bufptr < pkt->payload + pkt->size) { - au_writel(*bufptr++, ep->reg->write_fifo); - write_count++; - } else { - break; - } - } - - return write_count; -} -#endif - -/* - * This routine is called to restart transmission of a packet. - * The endpoint's TSIZE must be set to the new packet's size, - * and DMA to the write FIFO needs to be restarted. - * EP spinlock must be held when calling. - */ -static void -kickstart_send_packet(endpoint_t * ep) -{ - u32 cs; - usbdev_pkt_t *pkt = ep->inlist.head; - - vdbg("%s: ep%d, pkt=%p", __FUNCTION__, ep->address, pkt); - - if (!pkt) { - err("%s: head=NULL! list->count=%d", __FUNCTION__, - ep->inlist.count); - return; - } - - dma_cache_wback_inv((unsigned long)pkt->payload, pkt->size); - - /* - * make sure FIFO is empty - */ - flush_write_fifo(ep); - - cs = au_readl(ep->reg->ctrl_stat) & USBDEV_CS_STALL; - cs |= (pkt->size << USBDEV_CS_TSIZE_BIT); - au_writel(cs, ep->reg->ctrl_stat); - - if (get_dma_active_buffer(ep->indma) == 1) { - set_dma_count1(ep->indma, pkt->size); - set_dma_addr1(ep->indma, virt_to_phys(pkt->payload)); - enable_dma_buffer1(ep->indma); // reenable - } else { - set_dma_count0(ep->indma, pkt->size); - set_dma_addr0(ep->indma, virt_to_phys(pkt->payload)); - enable_dma_buffer0(ep->indma); // reenable - } - if (dma_halted(ep->indma)) - start_dma(ep->indma); -} - - -/* - * This routine is called when a packet in the inlist has been - * completed. Frees the completed packet and starts sending the - * next. EP spinlock must be held when calling. - */ -static usbdev_pkt_t * -send_packet_complete(endpoint_t * ep) -{ - usbdev_pkt_t *pkt = unlink_head(&ep->inlist); - - if (pkt) { - pkt->status = - (au_readl(ep->reg->ctrl_stat) & USBDEV_CS_NAK) ? - PKT_STATUS_NAK : PKT_STATUS_ACK; - - vdbg("%s: ep%d, %s pkt=%p, list count=%d", __FUNCTION__, - ep->address, (pkt->status & PKT_STATUS_NAK) ? - "NAK" : "ACK", pkt, ep->inlist.count); - } - - /* - * The write fifo should already be drained if things are - * working right, but flush it anyway just in case. - */ - flush_write_fifo(ep); - - // begin transmitting next packet in the inlist - if (ep->inlist.count) { - kickstart_send_packet(ep); - } - - return pkt; -} - -/* - * Add a new packet to the tail of the given ep's packet - * inlist. The transmit complete interrupt frees packets from - * the head of this list. EP spinlock must be held when calling. - */ -static int -send_packet(struct usb_dev* dev, usbdev_pkt_t *pkt, int async) -{ - pkt_list_t *list; - endpoint_t* ep; - - if (!pkt || !(ep = epaddr_to_ep(dev, pkt->ep_addr))) - return -EINVAL; - - if (!pkt->size) - return 0; - - list = &ep->inlist; - - if (!async && list->count) { - halt_dma(ep->indma); - flush_pkt_list(list); - } - - link_tail(ep, list, pkt); - - vdbg("%s: ep%d, pkt=%p, size=%d, list count=%d", __FUNCTION__, - ep->address, pkt, pkt->size, list->count); - - if (list->count == 1) { - /* - * if the packet count is one, it means the list was empty, - * and no more data will go out this ep until we kick-start - * it again. - */ - kickstart_send_packet(ep); - } - - return pkt->size; -} - -/* - * This routine is called to restart reception of a packet. - * EP spinlock must be held when calling. - */ -static void -kickstart_receive_packet(endpoint_t * ep) -{ - usbdev_pkt_t *pkt; - - // get and link a new packet for next reception - if (!(pkt = add_packet(ep, &ep->outlist, ep->max_pkt_size))) { - err("%s: could not alloc new packet", __FUNCTION__); - return; - } - - if (get_dma_active_buffer(ep->outdma) == 1) { - clear_dma_done1(ep->outdma); - set_dma_count1(ep->outdma, ep->max_pkt_size); - set_dma_count0(ep->outdma, 0); - set_dma_addr1(ep->outdma, virt_to_phys(pkt->payload)); - enable_dma_buffer1(ep->outdma); // reenable - } else { - clear_dma_done0(ep->outdma); - set_dma_count0(ep->outdma, ep->max_pkt_size); - set_dma_count1(ep->outdma, 0); - set_dma_addr0(ep->outdma, virt_to_phys(pkt->payload)); - enable_dma_buffer0(ep->outdma); // reenable - } - if (dma_halted(ep->outdma)) - start_dma(ep->outdma); -} - - -/* - * This routine is called when a packet in the outlist has been - * completed (received) and we need to prepare for a new packet - * to be received. Halts DMA and computes the packet size from the - * remaining DMA counter. Then prepares a new packet for reception - * and restarts DMA. FIXME: what if another packet comes in - * on top of the completed packet? Counter would be wrong. - * EP spinlock must be held when calling. - */ -static usbdev_pkt_t * -receive_packet_complete(endpoint_t * ep) -{ - usbdev_pkt_t *pkt = ep->outlist.tail; - u32 cs; - - halt_dma(ep->outdma); - - cs = au_readl(ep->reg->ctrl_stat); - - if (!pkt) - return NULL; - - pkt->size = ep->max_pkt_size - get_dma_residue(ep->outdma); - if (pkt->size) - dma_cache_inv((unsigned long)pkt->payload, pkt->size); - /* - * need to pull out any remaining bytes in the FIFO. - */ - endpoint_fifo_read(ep); - /* - * should be drained now, but flush anyway just in case. - */ - flush_read_fifo(ep); - - pkt->status = (cs & USBDEV_CS_NAK) ? PKT_STATUS_NAK : PKT_STATUS_ACK; - if (ep->address == 0 && (cs & USBDEV_CS_SU)) - pkt->status |= PKT_STATUS_SU; - - vdbg("%s: ep%d, %s pkt=%p, size=%d", __FUNCTION__, - ep->address, (pkt->status & PKT_STATUS_NAK) ? - "NAK" : "ACK", pkt, pkt->size); - - kickstart_receive_packet(ep); - - return pkt; -} - - -/* - **************************************************************************** - * Here starts the standard device request handlers. They are - * all called by do_setup() via a table of function pointers. - **************************************************************************** - */ - -static ep0_stage_t -do_get_status(struct usb_dev* dev, struct usb_ctrlrequest* setup) -{ - switch (setup->bRequestType) { - case 0x80: // Device - // FIXME: send device status - break; - case 0x81: // Interface - // FIXME: send interface status - break; - case 0x82: // End Point - // FIXME: send endpoint status - break; - default: - // Invalid Command - endpoint_stall(&dev->ep[0]); // Stall End Point 0 - break; - } - - return STATUS_STAGE; -} - -static ep0_stage_t -do_clear_feature(struct usb_dev* dev, struct usb_ctrlrequest* setup) -{ - switch (setup->bRequestType) { - case 0x00: // Device - if ((le16_to_cpu(setup->wValue) & 0xff) == 1) - dev->remote_wakeup_en = 0; - else - endpoint_stall(&dev->ep[0]); - break; - case 0x02: // End Point - if ((le16_to_cpu(setup->wValue) & 0xff) == 0) { - endpoint_t *ep = - epaddr_to_ep(dev, - le16_to_cpu(setup->wIndex) & 0xff); - - endpoint_unstall(ep); - endpoint_reset_datatoggle(ep); - } else - endpoint_stall(&dev->ep[0]); - break; - } - - return SETUP_STAGE; -} - -static ep0_stage_t -do_reserved(struct usb_dev* dev, struct usb_ctrlrequest* setup) -{ - // Invalid request, stall End Point 0 - endpoint_stall(&dev->ep[0]); - return SETUP_STAGE; -} - -static ep0_stage_t -do_set_feature(struct usb_dev* dev, struct usb_ctrlrequest* setup) -{ - switch (setup->bRequestType) { - case 0x00: // Device - if ((le16_to_cpu(setup->wValue) & 0xff) == 1) - dev->remote_wakeup_en = 1; - else - endpoint_stall(&dev->ep[0]); - break; - case 0x02: // End Point - if ((le16_to_cpu(setup->wValue) & 0xff) == 0) { - endpoint_t *ep = - epaddr_to_ep(dev, - le16_to_cpu(setup->wIndex) & 0xff); - - endpoint_stall(ep); - } else - endpoint_stall(&dev->ep[0]); - break; - } - - return SETUP_STAGE; -} - -static ep0_stage_t -do_set_address(struct usb_dev* dev, struct usb_ctrlrequest* setup) -{ - int new_state = dev->state; - int new_addr = le16_to_cpu(setup->wValue); - - dbg("%s: our address=%d", __FUNCTION__, new_addr); - - if (new_addr > 127) { - // usb spec doesn't tell us what to do, so just go to - // default state - new_state = DEFAULT; - dev->address = 0; - } else if (dev->address != new_addr) { - dev->address = new_addr; - new_state = ADDRESS; - } - - if (dev->state != new_state) { - dev->state = new_state; - /* inform function layer of usbdev state change */ - dev->func_cb(CB_NEW_STATE, dev->state, dev->cb_data); - } - - return SETUP_STAGE; -} - -static ep0_stage_t -do_get_descriptor(struct usb_dev* dev, struct usb_ctrlrequest* setup) -{ - int strnum, desc_len = le16_to_cpu(setup->wLength); - - switch (le16_to_cpu(setup->wValue) >> 8) { - case USB_DT_DEVICE: - // send device descriptor! - desc_len = desc_len > dev->dev_desc->bLength ? - dev->dev_desc->bLength : desc_len; - dbg("sending device desc, size=%d", desc_len); - send_packet(dev, alloc_packet(&dev->ep[0], desc_len, - dev->dev_desc), 0); - break; - case USB_DT_CONFIG: - // If the config descr index in low-byte of - // setup->wValue is valid, send config descr, - // otherwise stall ep0. - if ((le16_to_cpu(setup->wValue) & 0xff) == 0) { - // send config descriptor! - if (desc_len <= USB_DT_CONFIG_SIZE) { - dbg("sending partial config desc, size=%d", - desc_len); - send_packet(dev, - alloc_packet(&dev->ep[0], - desc_len, - dev->conf_desc), - 0); - } else { - int len = le16_to_cpu(dev->conf_desc->wTotalLength); - dbg("sending whole config desc," - " size=%d, our size=%d", desc_len, len); - desc_len = desc_len > len ? len : desc_len; - send_packet(dev, - alloc_packet(&dev->ep[0], - desc_len, - dev->full_conf_desc), - 0); - } - } else - endpoint_stall(&dev->ep[0]); - break; - case USB_DT_STRING: - // If the string descr index in low-byte of setup->wValue - // is valid, send string descr, otherwise stall ep0. - strnum = le16_to_cpu(setup->wValue) & 0xff; - if (strnum >= 0 && strnum < 6) { - struct usb_string_descriptor *desc = - dev->str_desc[strnum]; - desc_len = desc_len > desc->bLength ? - desc->bLength : desc_len; - dbg("sending string desc %d", strnum); - send_packet(dev, - alloc_packet(&dev->ep[0], desc_len, - desc), 0); - } else - endpoint_stall(&dev->ep[0]); - break; - default: - // Invalid request - err("invalid get desc=%d, stalled", - le16_to_cpu(setup->wValue) >> 8); - endpoint_stall(&dev->ep[0]); // Stall endpoint 0 - break; - } - - return STATUS_STAGE; -} - -static ep0_stage_t -do_set_descriptor(struct usb_dev* dev, struct usb_ctrlrequest* setup) -{ - // TODO: implement - // there will be an OUT data stage (the descriptor to set) - return DATA_STAGE; -} - -static ep0_stage_t -do_get_configuration(struct usb_dev* dev, struct usb_ctrlrequest* setup) -{ - // send dev->configuration - dbg("sending config"); - send_packet(dev, alloc_packet(&dev->ep[0], 1, &dev->configuration), - 0); - return STATUS_STAGE; -} - -static ep0_stage_t -do_set_configuration(struct usb_dev* dev, struct usb_ctrlrequest* setup) -{ - // set active config to low-byte of setup->wValue - dev->configuration = le16_to_cpu(setup->wValue) & 0xff; - dbg("set config, config=%d", dev->configuration); - if (!dev->configuration && dev->state > DEFAULT) { - dev->state = ADDRESS; - /* inform function layer of usbdev state change */ - dev->func_cb(CB_NEW_STATE, dev->state, dev->cb_data); - } else if (dev->configuration == 1) { - dev->state = CONFIGURED; - /* inform function layer of usbdev state change */ - dev->func_cb(CB_NEW_STATE, dev->state, dev->cb_data); - } else { - // FIXME: "respond with request error" - how? - } - - return SETUP_STAGE; -} - -static ep0_stage_t -do_get_interface(struct usb_dev* dev, struct usb_ctrlrequest* setup) -{ - // interface must be zero. - if ((le16_to_cpu(setup->wIndex) & 0xff) || dev->state == ADDRESS) { - // FIXME: respond with "request error". how? - } else if (dev->state == CONFIGURED) { - // send dev->alternate_setting - dbg("sending alt setting"); - send_packet(dev, alloc_packet(&dev->ep[0], 1, - &dev->alternate_setting), 0); - } - - return STATUS_STAGE; - -} - -static ep0_stage_t -do_set_interface(struct usb_dev* dev, struct usb_ctrlrequest* setup) -{ - if (dev->state == ADDRESS) { - // FIXME: respond with "request error". how? - } else if (dev->state == CONFIGURED) { - dev->interface = le16_to_cpu(setup->wIndex) & 0xff; - dev->alternate_setting = - le16_to_cpu(setup->wValue) & 0xff; - // interface and alternate_setting must be zero - if (dev->interface || dev->alternate_setting) { - // FIXME: respond with "request error". how? - } - } - - return SETUP_STAGE; -} - -static ep0_stage_t -do_synch_frame(struct usb_dev* dev, struct usb_ctrlrequest* setup) -{ - // TODO - return SETUP_STAGE; -} - -typedef ep0_stage_t (*req_method_t)(struct usb_dev* dev, - struct usb_ctrlrequest* setup); - - -/* Table of the standard device request handlers */ -static const req_method_t req_method[] = { - do_get_status, - do_clear_feature, - do_reserved, - do_set_feature, - do_reserved, - do_set_address, - do_get_descriptor, - do_set_descriptor, - do_get_configuration, - do_set_configuration, - do_get_interface, - do_set_interface, - do_synch_frame -}; - - -// SETUP packet request dispatcher -static void -do_setup (struct usb_dev* dev, struct usb_ctrlrequest* setup) -{ - req_method_t m; - - dbg("%s: req %d %s", __FUNCTION__, setup->bRequestType, - get_std_req_name(setup->bRequestType)); - - if ((setup->bRequestType & USB_TYPE_MASK) != USB_TYPE_STANDARD || - (setup->bRequestType & USB_RECIP_MASK) != USB_RECIP_DEVICE) { - err("%s: invalid requesttype 0x%02x", __FUNCTION__, - setup->bRequestType); - return; - } - - if ((setup->bRequestType & 0x80) == USB_DIR_OUT && setup->wLength) - dbg("%s: OUT phase! length=%d", __FUNCTION__, setup->wLength); - - if (setup->bRequestType < sizeof(req_method)/sizeof(req_method_t)) - m = req_method[setup->bRequestType]; - else - m = do_reserved; - - dev->ep0_stage = (*m)(dev, setup); -} - -/* - * A SETUP, DATA0, or DATA1 packet has been received - * on the default control endpoint's fifo. - */ -static void -process_ep0_receive (struct usb_dev* dev) -{ - endpoint_t *ep0 = &dev->ep[0]; - usbdev_pkt_t *pkt; - - spin_lock(&ep0->lock); - - // complete packet and prepare a new packet - pkt = receive_packet_complete(ep0); - if (!pkt) { - // FIXME: should put a warn/err here. - spin_unlock(&ep0->lock); - return; - } - - // unlink immediately from endpoint. - unlink_head(&ep0->outlist); - - // override current stage if h/w says it's a setup packet - if (pkt->status & PKT_STATUS_SU) - dev->ep0_stage = SETUP_STAGE; - - switch (dev->ep0_stage) { - case SETUP_STAGE: - vdbg("SU bit is %s in setup stage", - (pkt->status & PKT_STATUS_SU) ? "set" : "not set"); - - if (pkt->size == sizeof(struct usb_ctrlrequest)) { -#ifdef VDEBUG - if (pkt->status & PKT_STATUS_ACK) - vdbg("received SETUP"); - else - vdbg("received NAK SETUP"); -#endif - do_setup(dev, (struct usb_ctrlrequest*)pkt->payload); - } else - err("%s: wrong size SETUP received", __FUNCTION__); - break; - case DATA_STAGE: - /* - * this setup has an OUT data stage. Of the standard - * device requests, only set_descriptor has this stage, - * so this packet is that descriptor. TODO: drop it for - * now, set_descriptor not implemented. - * - * Need to place a byte in the write FIFO here, to prepare - * to send a zero-length DATA ack packet to the host in the - * STATUS stage. - */ - au_writel(0, ep0->reg->write_fifo); - dbg("received OUT stage DATAx on EP0, size=%d", pkt->size); - dev->ep0_stage = SETUP_STAGE; - break; - case STATUS_STAGE: - // this setup had an IN data stage, and host is ACK'ing - // the packet we sent during that stage. - if (pkt->size != 0) - warn("received non-zero ACK on EP0??"); -#ifdef VDEBUG - else - vdbg("received ACK on EP0"); -#endif - dev->ep0_stage = SETUP_STAGE; - break; - } - - spin_unlock(&ep0->lock); - // we're done processing the packet, free it - kfree(pkt); -} - - -/* - * A DATA0/1 packet has been received on one of the OUT endpoints (4 or 5) - */ -static void -process_ep_receive (struct usb_dev* dev, endpoint_t *ep) -{ - usbdev_pkt_t *pkt; - - spin_lock(&ep->lock); - pkt = receive_packet_complete(ep); - spin_unlock(&ep->lock); - - dev->func_cb(CB_PKT_COMPLETE, (unsigned long)pkt, dev->cb_data); -} - - - -/* This ISR handles the receive complete and suspend events */ -static void req_sus_intr (int irq, void *dev_id) -{ - struct usb_dev *dev = (struct usb_dev *) dev_id; - u32 status; - - status = au_readl(USBD_INTSTAT); - au_writel(status, USBD_INTSTAT); // ack'em - - if (status & (1<<0)) - process_ep0_receive(dev); - if (status & (1<<4)) - process_ep_receive(dev, &dev->ep[4]); - if (status & (1<<5)) - process_ep_receive(dev, &dev->ep[5]); -} - - -/* This ISR handles the DMA done events on EP0 */ -static void dma_done_ep0_intr(int irq, void *dev_id) -{ - struct usb_dev *dev = (struct usb_dev *) dev_id; - usbdev_pkt_t* pkt; - endpoint_t *ep0 = &dev->ep[0]; - u32 cs0, buff_done; - - spin_lock(&ep0->lock); - cs0 = au_readl(ep0->reg->ctrl_stat); - - // first check packet transmit done - if ((buff_done = get_dma_buffer_done(ep0->indma)) != 0) { - // transmitted a DATAx packet during DATA stage - // on control endpoint 0 - // clear DMA done bit - if (buff_done & DMA_D0) - clear_dma_done0(ep0->indma); - if (buff_done & DMA_D1) - clear_dma_done1(ep0->indma); - - pkt = send_packet_complete(ep0); - kfree(pkt); - } - - /* - * Now check packet receive done. Shouldn't get these, - * the receive packet complete intr should happen - * before the DMA done intr occurs. - */ - if ((buff_done = get_dma_buffer_done(ep0->outdma)) != 0) { - // clear DMA done bit - if (buff_done & DMA_D0) - clear_dma_done0(ep0->outdma); - if (buff_done & DMA_D1) - clear_dma_done1(ep0->outdma); - - //process_ep0_receive(dev); - } - - spin_unlock(&ep0->lock); -} - -/* This ISR handles the DMA done events on endpoints 2,3,4,5 */ -static void dma_done_ep_intr(int irq, void *dev_id) -{ - struct usb_dev *dev = (struct usb_dev *) dev_id; - int i; - - for (i = 2; i < 6; i++) { - u32 buff_done; - usbdev_pkt_t* pkt; - endpoint_t *ep = &dev->ep[i]; - - if (!ep->active) continue; - - spin_lock(&ep->lock); - - if (ep->direction == USB_DIR_IN) { - buff_done = get_dma_buffer_done(ep->indma); - if (buff_done != 0) { - // transmitted a DATAx pkt on the IN ep - // clear DMA done bit - if (buff_done & DMA_D0) - clear_dma_done0(ep->indma); - if (buff_done & DMA_D1) - clear_dma_done1(ep->indma); - - pkt = send_packet_complete(ep); - - spin_unlock(&ep->lock); - dev->func_cb(CB_PKT_COMPLETE, - (unsigned long)pkt, - dev->cb_data); - spin_lock(&ep->lock); - } - } else { - /* - * Check packet receive done (OUT ep). Shouldn't get - * these, the rx packet complete intr should happen - * before the DMA done intr occurs. - */ - buff_done = get_dma_buffer_done(ep->outdma); - if (buff_done != 0) { - // received a DATAx pkt on the OUT ep - // clear DMA done bit - if (buff_done & DMA_D0) - clear_dma_done0(ep->outdma); - if (buff_done & DMA_D1) - clear_dma_done1(ep->outdma); - - //process_ep_receive(dev, ep); - } - } - - spin_unlock(&ep->lock); - } -} - - -/*************************************************************************** - * Here begins the external interface functions - *************************************************************************** - */ - -/* - * allocate a new packet - */ -int -usbdev_alloc_packet(int ep_addr, int data_size, usbdev_pkt_t** pkt) -{ - endpoint_t * ep = epaddr_to_ep(&usbdev, ep_addr); - usbdev_pkt_t* lpkt = NULL; - - if (!ep || !ep->active || ep->address < 2) - return -ENODEV; - if (data_size > ep->max_pkt_size) - return -EINVAL; - - lpkt = *pkt = alloc_packet(ep, data_size, NULL); - if (!lpkt) - return -ENOMEM; - return 0; -} - - -/* - * packet send - */ -int -usbdev_send_packet(int ep_addr, usbdev_pkt_t * pkt) -{ - unsigned long flags; - int count; - endpoint_t * ep; - - if (!pkt || !(ep = epaddr_to_ep(&usbdev, pkt->ep_addr)) || - !ep->active || ep->address < 2) - return -ENODEV; - if (ep->direction != USB_DIR_IN) - return -EINVAL; - - spin_lock_irqsave(&ep->lock, flags); - count = send_packet(&usbdev, pkt, 1); - spin_unlock_irqrestore(&ep->lock, flags); - - return count; -} - -/* - * packet receive - */ -int -usbdev_receive_packet(int ep_addr, usbdev_pkt_t** pkt) -{ - unsigned long flags; - usbdev_pkt_t* lpkt = NULL; - endpoint_t *ep = epaddr_to_ep(&usbdev, ep_addr); - - if (!ep || !ep->active || ep->address < 2) - return -ENODEV; - if (ep->direction != USB_DIR_OUT) - return -EINVAL; - - spin_lock_irqsave(&ep->lock, flags); - if (ep->outlist.count > 1) - lpkt = unlink_head(&ep->outlist); - spin_unlock_irqrestore(&ep->lock, flags); - - if (!lpkt) { - /* no packet available */ - *pkt = NULL; - return -ENODATA; - } - - *pkt = lpkt; - - return lpkt->size; -} - - -/* - * return total queued byte count on the endpoint. - */ -int -usbdev_get_byte_count(int ep_addr) -{ - unsigned long flags; - pkt_list_t *list; - usbdev_pkt_t *scan; - int count = 0; - endpoint_t * ep = epaddr_to_ep(&usbdev, ep_addr); - - if (!ep || !ep->active || ep->address < 2) - return -ENODEV; - - if (ep->direction == USB_DIR_IN) { - list = &ep->inlist; - - spin_lock_irqsave(&ep->lock, flags); - for (scan = list->head; scan; scan = scan->next) - count += scan->size; - spin_unlock_irqrestore(&ep->lock, flags); - } else { - list = &ep->outlist; - - spin_lock_irqsave(&ep->lock, flags); - if (list->count > 1) { - for (scan = list->head; scan != list->tail; - scan = scan->next) - count += scan->size; - } - spin_unlock_irqrestore(&ep->lock, flags); - } - - return count; -} - - -void -usbdev_exit(void) -{ - endpoint_t *ep; - int i; - - au_writel(0, USBD_INTEN); // disable usb dev ints - au_writel(0, USBD_ENABLE); // disable usb dev - - free_irq(AU1000_USB_DEV_REQ_INT, &usbdev); - free_irq(AU1000_USB_DEV_SUS_INT, &usbdev); - - // free all control endpoint resources - ep = &usbdev.ep[0]; - free_au1000_dma(ep->indma); - free_au1000_dma(ep->outdma); - endpoint_flush(ep); - - // free ep resources - for (i = 2; i < 6; i++) { - ep = &usbdev.ep[i]; - if (!ep->active) continue; - - if (ep->direction == USB_DIR_IN) { - free_au1000_dma(ep->indma); - } else { - free_au1000_dma(ep->outdma); - } - endpoint_flush(ep); - } - - kfree(usbdev.full_conf_desc); -} - -int -usbdev_init(struct usb_device_descriptor* dev_desc, - struct usb_config_descriptor* config_desc, - struct usb_interface_descriptor* if_desc, - struct usb_endpoint_descriptor* ep_desc, - struct usb_string_descriptor* str_desc[], - void (*cb)(usbdev_cb_type_t, unsigned long, void *), - void* cb_data) -{ - endpoint_t *ep0; - int i, ret=0; - u8* fcd; - - if (dev_desc->bNumConfigurations > 1 || - config_desc->bNumInterfaces > 1 || - if_desc->bNumEndpoints > 4) { - err("Only one config, one i/f, and no more " - "than 4 ep's allowed"); - ret = -EINVAL; - goto out; - } - - if (!cb) { - err("Function-layer callback required"); - ret = -EINVAL; - goto out; - } - - if (dev_desc->bMaxPacketSize0 != USBDEV_EP0_MAX_PACKET_SIZE) { - warn("EP0 Max Packet size must be %d", - USBDEV_EP0_MAX_PACKET_SIZE); - dev_desc->bMaxPacketSize0 = USBDEV_EP0_MAX_PACKET_SIZE; - } - - memset(&usbdev, 0, sizeof(struct usb_dev)); - - usbdev.state = DEFAULT; - usbdev.dev_desc = dev_desc; - usbdev.if_desc = if_desc; - usbdev.conf_desc = config_desc; - for (i=0; i<6; i++) - usbdev.str_desc[i] = str_desc[i]; - usbdev.func_cb = cb; - usbdev.cb_data = cb_data; - - /* Initialize default control endpoint */ - ep0 = &usbdev.ep[0]; - ep0->active = 1; - ep0->type = CONTROL_EP; - ep0->max_pkt_size = USBDEV_EP0_MAX_PACKET_SIZE; - spin_lock_init(&ep0->lock); - ep0->desc = NULL; // ep0 has no descriptor - ep0->address = 0; - ep0->direction = 0; - ep0->reg = &ep_reg[0]; - - /* Initialize the other requested endpoints */ - for (i = 0; i < if_desc->bNumEndpoints; i++) { - struct usb_endpoint_descriptor* epd = &ep_desc[i]; - endpoint_t *ep; - - if ((epd->bEndpointAddress & 0x80) == USB_DIR_IN) { - ep = &usbdev.ep[2]; - ep->address = 2; - if (ep->active) { - ep = &usbdev.ep[3]; - ep->address = 3; - if (ep->active) { - err("too many IN ep's requested"); - ret = -ENODEV; - goto out; - } - } - } else { - ep = &usbdev.ep[4]; - ep->address = 4; - if (ep->active) { - ep = &usbdev.ep[5]; - ep->address = 5; - if (ep->active) { - err("too many OUT ep's requested"); - ret = -ENODEV; - goto out; - } - } - } - - ep->active = 1; - epd->bEndpointAddress &= ~0x0f; - epd->bEndpointAddress |= (u8)ep->address; - ep->direction = epd->bEndpointAddress & 0x80; - ep->type = epd->bmAttributes & 0x03; - ep->max_pkt_size = le16_to_cpu(epd->wMaxPacketSize); - spin_lock_init(&ep->lock); - ep->desc = epd; - ep->reg = &ep_reg[ep->address]; - } - - /* - * initialize the full config descriptor - */ - usbdev.full_conf_desc = fcd = kmalloc(le16_to_cpu(config_desc->wTotalLength), - ALLOC_FLAGS); - if (!fcd) { - err("failed to alloc full config descriptor"); - ret = -ENOMEM; - goto out; - } - - memcpy(fcd, config_desc, USB_DT_CONFIG_SIZE); - fcd += USB_DT_CONFIG_SIZE; - memcpy(fcd, if_desc, USB_DT_INTERFACE_SIZE); - fcd += USB_DT_INTERFACE_SIZE; - for (i = 0; i < if_desc->bNumEndpoints; i++) { - memcpy(fcd, &ep_desc[i], USB_DT_ENDPOINT_SIZE); - fcd += USB_DT_ENDPOINT_SIZE; - } - - /* Now we're ready to enable the controller */ - au_writel(0x0002, USBD_ENABLE); - udelay(100); - au_writel(0x0003, USBD_ENABLE); - udelay(100); - - /* build and send config table based on ep descriptors */ - for (i = 0; i < 6; i++) { - endpoint_t *ep; - if (i == 1) - continue; // skip dummy ep - ep = &usbdev.ep[i]; - if (ep->active) { - au_writel((ep->address << 4) | 0x04, USBD_CONFIG); - au_writel(((ep->max_pkt_size & 0x380) >> 7) | - (ep->direction >> 4) | (ep->type << 4), - USBD_CONFIG); - au_writel((ep->max_pkt_size & 0x7f) << 1, USBD_CONFIG); - au_writel(0x00, USBD_CONFIG); - au_writel(ep->address, USBD_CONFIG); - } else { - u8 dir = (i==2 || i==3) ? DIR_IN : DIR_OUT; - au_writel((i << 4) | 0x04, USBD_CONFIG); - au_writel(((16 & 0x380) >> 7) | dir | - (BULK_EP << 4), USBD_CONFIG); - au_writel((16 & 0x7f) << 1, USBD_CONFIG); - au_writel(0x00, USBD_CONFIG); - au_writel(i, USBD_CONFIG); - } - } - - /* - * Enable Receive FIFO Complete interrupts only. Transmit - * complete is being handled by the DMA done interrupts. - */ - au_writel(0x31, USBD_INTEN); - - /* - * Controller is now enabled, request DMA and IRQ - * resources. - */ - - /* request the USB device transfer complete interrupt */ - if (request_irq(AU1000_USB_DEV_REQ_INT, req_sus_intr, IRQF_DISABLED, - "USBdev req", &usbdev)) { - err("Can't get device request intr"); - ret = -ENXIO; - goto out; - } - /* request the USB device suspend interrupt */ - if (request_irq(AU1000_USB_DEV_SUS_INT, req_sus_intr, IRQF_DISABLED, - "USBdev sus", &usbdev)) { - err("Can't get device suspend intr"); - ret = -ENXIO; - goto out; - } - - /* Request EP0 DMA and IRQ */ - if ((ep0->indma = request_au1000_dma(ep_dma_id[0].id, - ep_dma_id[0].str, - dma_done_ep0_intr, - IRQF_DISABLED, - &usbdev)) < 0) { - err("Can't get %s DMA", ep_dma_id[0].str); - ret = -ENXIO; - goto out; - } - if ((ep0->outdma = request_au1000_dma(ep_dma_id[1].id, - ep_dma_id[1].str, - NULL, 0, NULL)) < 0) { - err("Can't get %s DMA", ep_dma_id[1].str); - ret = -ENXIO; - goto out; - } - - // Flush the ep0 buffers and FIFOs - endpoint_flush(ep0); - // start packet reception on ep0 - kickstart_receive_packet(ep0); - - /* Request DMA and IRQ for the other endpoints */ - for (i = 2; i < 6; i++) { - endpoint_t *ep = &usbdev.ep[i]; - if (!ep->active) - continue; - - // Flush the endpoint buffers and FIFOs - endpoint_flush(ep); - - if (ep->direction == USB_DIR_IN) { - ep->indma = - request_au1000_dma(ep_dma_id[ep->address].id, - ep_dma_id[ep->address].str, - dma_done_ep_intr, - IRQF_DISABLED, - &usbdev); - if (ep->indma < 0) { - err("Can't get %s DMA", - ep_dma_id[ep->address].str); - ret = -ENXIO; - goto out; - } - } else { - ep->outdma = - request_au1000_dma(ep_dma_id[ep->address].id, - ep_dma_id[ep->address].str, - NULL, 0, NULL); - if (ep->outdma < 0) { - err("Can't get %s DMA", - ep_dma_id[ep->address].str); - ret = -ENXIO; - goto out; - } - - // start packet reception on OUT endpoint - kickstart_receive_packet(ep); - } - } - - out: - if (ret) - usbdev_exit(); - return ret; -} - -EXPORT_SYMBOL(usbdev_init); -EXPORT_SYMBOL(usbdev_exit); -EXPORT_SYMBOL(usbdev_alloc_packet); -EXPORT_SYMBOL(usbdev_receive_packet); -EXPORT_SYMBOL(usbdev_send_packet); -EXPORT_SYMBOL(usbdev_get_byte_count); diff --git a/arch/mips/au1000/db1x00/board_setup.c b/arch/mips/au1000/db1x00/board_setup.c index 7a79293f8527..8b08edb977be 100644 --- a/arch/mips/au1000/db1x00/board_setup.c +++ b/arch/mips/au1000/db1x00/board_setup.c @@ -58,11 +58,6 @@ void __init board_setup(void) pin_func = 0; /* not valid for 1550 */ -#ifdef CONFIG_AU1X00_USB_DEVICE - // 2nd USB port is USB device - pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8000); - au_writel(pin_func, SYS_PINFUNC); -#endif #if defined(CONFIG_IRDA) && (defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100)) /* set IRFIRSEL instead of GPIO15 */ diff --git a/arch/mips/au1000/mtx-1/board_setup.c b/arch/mips/au1000/mtx-1/board_setup.c index e917e54fc683..13f9bf5f91a6 100644 --- a/arch/mips/au1000/mtx-1/board_setup.c +++ b/arch/mips/au1000/mtx-1/board_setup.c @@ -51,15 +51,11 @@ void board_reset (void) void __init board_setup(void) { -#if defined (CONFIG_USB_OHCI) || defined (CONFIG_AU1X00_USB_DEVICE) -#ifdef CONFIG_AU1X00_USB_DEVICE - // 2nd USB port is USB device - au_writel(au_readl(SYS_PINFUNC) & (u32)(~0x8000), SYS_PINFUNC); -#endif +#ifdef CONFIG_USB_OHCI // enable USB power switch au_writel( au_readl(GPIO2_DIR) | 0x10, GPIO2_DIR ); au_writel( 0x100000, GPIO2_OUTPUT ); -#endif // defined (CONFIG_USB_OHCI) || defined (CONFIG_AU1X00_USB_DEVICE) +#endif // defined (CONFIG_USB_OHCI) #ifdef CONFIG_PCI #if defined(__MIPSEB__) diff --git a/arch/mips/au1000/pb1000/board_setup.c b/arch/mips/au1000/pb1000/board_setup.c index 1cf18e16ab54..824cfafaff92 100644 --- a/arch/mips/au1000/pb1000/board_setup.c +++ b/arch/mips/au1000/pb1000/board_setup.c @@ -54,7 +54,7 @@ void __init board_setup(void) au_writel(0, SYS_PINSTATERD); udelay(100); -#if defined (CONFIG_USB_OHCI) || defined (CONFIG_AU1X00_USB_DEVICE) +#ifdef CONFIG_USB_OHCI /* zero and disable FREQ2 */ sys_freqctrl = au_readl(SYS_FREQCTRL0); sys_freqctrl &= ~0xFFF00000; @@ -105,22 +105,18 @@ void __init board_setup(void) #ifdef CONFIG_USB_OHCI sys_clksrc |= ((4<<12) | (0<<11) | (0<<10)); #endif -#ifdef CONFIG_AU1X00_USB_DEVICE - sys_clksrc |= ((4<<7) | (0<<6) | (0<<5)); -#endif au_writel(sys_clksrc, SYS_CLKSRC); // configure pins GPIO[14:9] as GPIO pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8080); -#ifndef CONFIG_AU1X00_USB_DEVICE // 2nd USB port is USB host pin_func |= 0x8000; -#endif + au_writel(pin_func, SYS_PINFUNC); au_writel(0x2800, SYS_TRIOUTCLR); au_writel(0x0030, SYS_OUTPUTCLR); -#endif // defined (CONFIG_USB_OHCI) || defined (CONFIG_AU1X00_USB_DEVICE) +#endif // defined (CONFIG_USB_OHCI) // make gpio 15 an input (for interrupt line) pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x100); diff --git a/arch/mips/au1000/pb1100/board_setup.c b/arch/mips/au1000/pb1100/board_setup.c index db27b9331ff3..2d1533f116c0 100644 --- a/arch/mips/au1000/pb1100/board_setup.c +++ b/arch/mips/au1000/pb1100/board_setup.c @@ -55,7 +55,7 @@ void __init board_setup(void) au_writel(0, SYS_PININPUTEN); udelay(100); -#if defined (CONFIG_USB_OHCI) || defined (CONFIG_AU1X00_USB_DEVICE) +#ifdef CONFIG_USB_OHCI // configure pins GPIO[14:9] as GPIO pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x80); @@ -92,12 +92,10 @@ void __init board_setup(void) // get USB Functionality pin state (device vs host drive pins) pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8000); -#ifndef CONFIG_AU1X00_USB_DEVICE // 2nd USB port is USB host pin_func |= 0x8000; -#endif au_writel(pin_func, SYS_PINFUNC); -#endif // defined (CONFIG_USB_OHCI) || defined (CONFIG_AU1X00_USB_DEVICE) +#endif // defined (CONFIG_USB_OHCI) /* Enable sys bus clock divider when IDLE state or no bus activity. */ au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL); diff --git a/arch/mips/au1000/pb1500/board_setup.c b/arch/mips/au1000/pb1500/board_setup.c index 1a9a293de6ab..0ffdb4fd575b 100644 --- a/arch/mips/au1000/pb1500/board_setup.c +++ b/arch/mips/au1000/pb1500/board_setup.c @@ -56,7 +56,7 @@ void __init board_setup(void) au_writel(0, SYS_PINSTATERD); udelay(100); -#if defined (CONFIG_USB_OHCI) || defined (CONFIG_AU1X00_USB_DEVICE) +#ifdef CONFIG_USB_OHCI /* GPIO201 is input for PCMCIA card detect */ /* GPIO203 is input for PCMCIA interrupt request */ @@ -88,19 +88,14 @@ void __init board_setup(void) #ifdef CONFIG_USB_OHCI sys_clksrc |= ((4<<12) | (0<<11) | (0<<10)); #endif -#ifdef CONFIG_AU1X00_USB_DEVICE - sys_clksrc |= ((4<<7) | (0<<6) | (0<<5)); -#endif au_writel(sys_clksrc, SYS_CLKSRC); pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8000); -#ifndef CONFIG_AU1X00_USB_DEVICE // 2nd USB port is USB host pin_func |= 0x8000; -#endif au_writel(pin_func, SYS_PINFUNC); -#endif // defined (CONFIG_USB_OHCI) || defined (CONFIG_AU1X00_USB_DEVICE) +#endif // defined (CONFIG_USB_OHCI) diff --git a/arch/mips/configs/pb1100_defconfig b/arch/mips/configs/pb1100_defconfig index 741f8258075c..9e672f63a0aa 100644 --- a/arch/mips/configs/pb1100_defconfig +++ b/arch/mips/configs/pb1100_defconfig @@ -76,7 +76,6 @@ CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y CONFIG_SOC_AU1100=y CONFIG_SOC_AU1X00=y CONFIG_SWAP_IO_SPACE=y -# CONFIG_AU1X00_USB_DEVICE is not set CONFIG_MIPS_L1_CACHE_SHIFT=5 # diff --git a/arch/mips/configs/pb1500_defconfig b/arch/mips/configs/pb1500_defconfig index 8576340714da..d0c0f4af1bff 100644 --- a/arch/mips/configs/pb1500_defconfig +++ b/arch/mips/configs/pb1500_defconfig @@ -75,7 +75,6 @@ CONFIG_CPU_LITTLE_ENDIAN=y CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y CONFIG_SOC_AU1500=y CONFIG_SOC_AU1X00=y -# CONFIG_AU1X00_USB_DEVICE is not set CONFIG_MIPS_L1_CACHE_SHIFT=5 # diff --git a/arch/mips/dec/int-handler.S b/arch/mips/dec/int-handler.S index 55d60d5e0e86..31dd47d1002d 100644 --- a/arch/mips/dec/int-handler.S +++ b/arch/mips/dec/int-handler.S @@ -266,10 +266,8 @@ handle_it: LONG_L s0, TI_REGS($28) LONG_S sp, TI_REGS($28) - jal do_IRQ - LONG_S s0, TI_REGS($28) - - j ret_from_irq + PTR_LA ra, ret_from_irq + j do_IRQ nop #ifdef CONFIG_32BIT @@ -279,9 +277,8 @@ fpu: #endif spurious: - jal spurious_interrupt - nop - j ret_from_irq + PTR_LA ra, _ret_from_irq + j spurious_interrupt nop END(plat_irq_dispatch) diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index 9fbf8430c849..8485af340ee1 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -135,7 +135,6 @@ static inline void check_wait(void) case CPU_R5000: case CPU_NEVADA: case CPU_RM7000: - case CPU_RM9000: case CPU_4KC: case CPU_4KEC: case CPU_4KSC: @@ -164,6 +163,14 @@ static inline void check_wait(void) } else printk(" unavailable.\n"); break; + case CPU_RM9000: + if ((c->processor_id & 0x00ff) >= 0x40) { + cpu_wait = r4k_wait; + printk(" available.\n"); + } else { + printk(" unavailable.\n"); + } + break; default: printk(" unavailable.\n"); break; diff --git a/arch/mips/kernel/entry.S b/arch/mips/kernel/entry.S index e93e43e1f42d..417c08ac76eb 100644 --- a/arch/mips/kernel/entry.S +++ b/arch/mips/kernel/entry.S @@ -20,10 +20,7 @@ #include <asm/mipsmtregs.h> #endif -#ifdef CONFIG_PREEMPT - .macro preempt_stop - .endm -#else +#ifndef CONFIG_PREEMPT .macro preempt_stop local_irq_disable .endm @@ -32,9 +29,16 @@ .text .align 5 +FEXPORT(ret_from_irq) + LONG_S s0, TI_REGS($28) +#ifdef CONFIG_PREEMPT +FEXPORT(ret_from_exception) +#else + b _ret_from_irq FEXPORT(ret_from_exception) preempt_stop -FEXPORT(ret_from_irq) +#endif +FEXPORT(_ret_from_irq) LONG_L t0, PT_STATUS(sp) # returning to kernel mode? andi t0, t0, KU_USER beqz t0, resume_kernel diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S index 50ed77297728..5baca16993d0 100644 --- a/arch/mips/kernel/genex.S +++ b/arch/mips/kernel/genex.S @@ -133,9 +133,8 @@ NESTED(handle_int, PT_SIZE, sp) LONG_L s0, TI_REGS($28) LONG_S sp, TI_REGS($28) - jal plat_irq_dispatch - LONG_S s0, TI_REGS($28) - j ret_from_irq + PTR_LA ra, ret_from_irq + j plat_irq_dispatch END(handle_int) __INIT @@ -224,9 +223,8 @@ NESTED(except_vec_vi_handler, 0, sp) LONG_L s0, TI_REGS($28) LONG_S sp, TI_REGS($28) - jalr v0 - LONG_S s0, TI_REGS($28) PTR_LA ra, ret_from_irq + jr v0 END(except_vec_vi_handler) /* diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c index 46ee5a68ab13..4ed37ba19731 100644 --- a/arch/mips/kernel/proc.c +++ b/arch/mips/kernel/proc.c @@ -107,7 +107,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) seq_printf(m, "processor\t\t: %ld\n", n); sprintf(fmt, "cpu model\t\t: %%s V%%d.%%d%s\n", - cpu_has_fpu ? " FPU V%d.%d" : ""); + cpu_data[n].options & MIPS_CPU_FPU ? " FPU V%d.%d" : ""); seq_printf(m, fmt, cpu_name[cpu_data[n].cputype <= CPU_LAST ? cpu_data[n].cputype : CPU_UNKNOWN], (version >> 4) & 0x0f, version & 0x0f, diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c index 045d987bc683..9f307eb1a31e 100644 --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c @@ -115,7 +115,7 @@ void start_thread(struct pt_regs * regs, unsigned long pc, unsigned long sp) status |= KU_USER; regs->cp0_status = status; clear_used_math(); - lose_fpu(); + clear_fpu_owner(); if (cpu_has_dsp) __init_dsp(); regs->cp0_epc = pc; diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c index 362d1728e531..258d74fd0b63 100644 --- a/arch/mips/kernel/ptrace.c +++ b/arch/mips/kernel/ptrace.c @@ -106,6 +106,7 @@ int ptrace_setregs (struct task_struct *child, __s64 __user *data) int ptrace_getfpregs (struct task_struct *child, __u32 __user *data) { int i; + unsigned int tmp; if (!access_ok(VERIFY_WRITE, data, 33 * 8)) return -EIO; @@ -121,10 +122,10 @@ int ptrace_getfpregs (struct task_struct *child, __u32 __user *data) __put_user (child->thread.fpu.fcr31, data + 64); + preempt_disable(); if (cpu_has_fpu) { - unsigned int flags, tmp; + unsigned int flags; - preempt_disable(); if (cpu_has_mipsmt) { unsigned int vpflags = dvpe(); flags = read_c0_status(); @@ -138,11 +139,11 @@ int ptrace_getfpregs (struct task_struct *child, __u32 __user *data) __asm__ __volatile__("cfc1\t%0,$0" : "=r" (tmp)); write_c0_status(flags); } - preempt_enable(); - __put_user (tmp, data + 65); } else { - __put_user ((__u32) 0, data + 65); + tmp = 0; } + preempt_enable(); + __put_user (tmp, data + 65); return 0; } @@ -245,16 +246,17 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) unsigned int mtflags; #endif /* CONFIG_MIPS_MT_SMTC */ - if (!cpu_has_fpu) + preempt_disable(); + if (!cpu_has_fpu) { + preempt_enable(); break; + } #ifdef CONFIG_MIPS_MT_SMTC /* Read-modify-write of Status must be atomic */ local_irq_save(irqflags); mtflags = dmt(); #endif /* CONFIG_MIPS_MT_SMTC */ - - preempt_disable(); if (cpu_has_mipsmt) { unsigned int vpflags = dvpe(); flags = read_c0_status(); diff --git a/arch/mips/kernel/ptrace32.c b/arch/mips/kernel/ptrace32.c index f40ecd8be05f..d9a39c169450 100644 --- a/arch/mips/kernel/ptrace32.c +++ b/arch/mips/kernel/ptrace32.c @@ -175,7 +175,9 @@ asmlinkage int sys32_ptrace(int request, int pid, int addr, int data) unsigned int mtflags; #endif /* CONFIG_MIPS_MT_SMTC */ + preempt_disable(); if (!cpu_has_fpu) { + preempt_enable(); tmp = 0; break; } @@ -186,7 +188,6 @@ asmlinkage int sys32_ptrace(int request, int pid, int addr, int data) mtflags = dmt(); #endif /* CONFIG_MIPS_MT_SMTC */ - preempt_disable(); if (cpu_has_mipsmt) { unsigned int vpflags = dvpe(); flags = read_c0_status(); diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c index 221895802dca..1af3612a1ce8 100644 --- a/arch/mips/kernel/smp.c +++ b/arch/mips/kernel/smp.c @@ -467,14 +467,18 @@ static DEFINE_PER_CPU(struct cpu, cpu_devices); static int __init topology_init(void) { - int cpu; - int ret; + int i, ret; - for_each_present_cpu(cpu) { - ret = register_cpu(&per_cpu(cpu_devices, cpu), cpu); +#ifdef CONFIG_NUMA + for_each_online_node(i) + register_one_node(i); +#endif /* CONFIG_NUMA */ + + for_each_present_cpu(i) { + ret = register_cpu(&per_cpu(cpu_devices, i), i); if (ret) printk(KERN_WARNING "topology_init: register_cpu %d " - "failed (%d)\n", cpu, ret); + "failed (%d)\n", i, ret); } return 0; diff --git a/arch/mips/kernel/smtc-asm.S b/arch/mips/kernel/smtc-asm.S index 76cb31d57482..1cb9441f1474 100644 --- a/arch/mips/kernel/smtc-asm.S +++ b/arch/mips/kernel/smtc-asm.S @@ -97,15 +97,12 @@ FEXPORT(__smtc_ipi_vector) SAVE_ALL CLI TRACE_IRQS_OFF - move a0,sp /* Function to be invoked passed stack pad slot 5 */ lw t0,PT_PADSLOT5(sp) /* Argument from sender passed in stack pad slot 4 */ - lw a1,PT_PADSLOT4(sp) - jalr t0 - nop - j ret_from_irq - nop + lw a0,PT_PADSLOT4(sp) + PTR_LA ra, _ret_from_irq + jr t0 /* * Called from idle loop to provoke processing of queued IPIs diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index b7292a56d4cd..cce8313ec27d 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -66,7 +66,7 @@ extern asmlinkage void handle_mcheck(void); extern asmlinkage void handle_reserved(void); extern int fpu_emulator_cop1Handler(struct pt_regs *xcp, - struct mips_fpu_struct *ctx); + struct mips_fpu_struct *ctx, int has_fpu); void (*board_be_init)(void); int (*board_be_handler)(struct pt_regs *regs, int is_fixup); @@ -641,7 +641,7 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31) preempt_enable(); /* Run the emulator */ - sig = fpu_emulator_cop1Handler (regs, ¤t->thread.fpu); + sig = fpu_emulator_cop1Handler (regs, ¤t->thread.fpu, 1); preempt_disable(); @@ -791,11 +791,13 @@ asmlinkage void do_cpu(struct pt_regs *regs) set_used_math(); } - preempt_enable(); - - if (!cpu_has_fpu) { - int sig = fpu_emulator_cop1Handler(regs, - ¤t->thread.fpu); + if (cpu_has_fpu) { + preempt_enable(); + } else { + int sig; + preempt_enable(); + sig = fpu_emulator_cop1Handler(regs, + ¤t->thread.fpu, 0); if (sig) force_sig(sig, current); #ifdef CONFIG_MIPS_MT_FPAFF diff --git a/arch/mips/math-emu/cp1emu.c b/arch/mips/math-emu/cp1emu.c index 3f0d5d26d506..80531b35cd61 100644 --- a/arch/mips/math-emu/cp1emu.c +++ b/arch/mips/math-emu/cp1emu.c @@ -38,8 +38,6 @@ #include <asm/inst.h> #include <asm/bootinfo.h> -#include <asm/cpu.h> -#include <asm/cpu-features.h> #include <asm/processor.h> #include <asm/ptrace.h> #include <asm/signal.h> @@ -1233,7 +1231,8 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx, return 0; } -int fpu_emulator_cop1Handler(struct pt_regs *xcp, struct mips_fpu_struct *ctx) +int fpu_emulator_cop1Handler(struct pt_regs *xcp, struct mips_fpu_struct *ctx, + int has_fpu) { unsigned long oldepc, prevepc; mips_instruction insn; @@ -1263,7 +1262,7 @@ int fpu_emulator_cop1Handler(struct pt_regs *xcp, struct mips_fpu_struct *ctx) ieee754_csr.rm = mips_rm[ieee754_csr.rm]; } - if (cpu_has_fpu) + if (has_fpu) break; if (sig) break; diff --git a/arch/mips/mips-boards/malta/malta_int.c b/arch/mips/mips-boards/malta/malta_int.c index ed221dc7f6ac..6244d0e2c7de 100644 --- a/arch/mips/mips-boards/malta/malta_int.c +++ b/arch/mips/mips-boards/malta/malta_int.c @@ -212,23 +212,23 @@ static inline unsigned int irq_ffs(unsigned int pending) unsigned int a0 = 7; unsigned int t0; - t0 = s0 & 0xf000; + t0 = pending & 0xf000; t0 = t0 < 1; t0 = t0 << 2; a0 = a0 - t0; - s0 = s0 << t0; + pending = pending << t0; - t0 = s0 & 0xc000; + t0 = pending & 0xc000; t0 = t0 < 1; t0 = t0 << 1; a0 = a0 - t0; - s0 = s0 << t0; + pending = pending << t0; - t0 = s0 & 0x8000; + t0 = pending & 0x8000; t0 = t0 < 1; //t0 = t0 << 2; a0 = a0 - t0; - //s0 = s0 << t0; + //pending = pending << t0; return a0; #endif diff --git a/arch/mips/tx4927/common/tx4927_setup.c b/arch/mips/tx4927/common/tx4927_setup.c index 3ace4037343e..4658b2ae4833 100644 --- a/arch/mips/tx4927/common/tx4927_setup.c +++ b/arch/mips/tx4927/common/tx4927_setup.c @@ -53,19 +53,9 @@ void __init tx4927_time_init(void); void dump_cp0(char *key); -void (*__wbflush) (void); - -static void tx4927_write_buffer_flush(void) -{ - __asm__ __volatile__ - ("sync\n\t" "nop\n\t" "loop: bc0f loop\n\t" "nop\n\t"); -} - - void __init plat_mem_setup(void) { board_time_init = tx4927_time_init; - __wbflush = tx4927_write_buffer_flush; #ifdef CONFIG_TOSHIBA_RBTX4927 { diff --git a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c index 3e24413d4c09..0c3c3f668230 100644 --- a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c +++ b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c @@ -129,6 +129,7 @@ JP7 is not bus master -- do NOT use -- only 4 pci bus master's allowed -- SouthB #include <asm/processor.h> #include <asm/reboot.h> #include <asm/time.h> +#include <asm/wbflush.h> #include <linux/bootmem.h> #include <linux/blkdev.h> #ifdef CONFIG_RTC_DS1742 diff --git a/arch/mips/tx4938/common/irq.c b/arch/mips/tx4938/common/irq.c index b6024749b8f4..77fe2454f5b9 100644 --- a/arch/mips/tx4938/common/irq.c +++ b/arch/mips/tx4938/common/irq.c @@ -30,6 +30,7 @@ #include <asm/irq.h> #include <asm/mipsregs.h> #include <asm/system.h> +#include <asm/wbflush.h> #include <asm/tx4938/rbtx4938.h> /**********************************************************************************/ diff --git a/arch/mips/tx4938/common/setup.c b/arch/mips/tx4938/common/setup.c index 71859c4fee84..f415a1f18fba 100644 --- a/arch/mips/tx4938/common/setup.c +++ b/arch/mips/tx4938/common/setup.c @@ -41,29 +41,10 @@ void __init tx4938_setup(void); void __init tx4938_time_init(void); void dump_cp0(char *key); -void (*__wbflush) (void); - -static void -tx4938_write_buffer_flush(void) -{ - mmiowb(); - - __asm__ __volatile__( - ".set push\n\t" - ".set noreorder\n\t" - "lw $0,%0\n\t" - "nop\n\t" - ".set pop" - : /* no output */ - : "m" (*(int *)KSEG1) - : "memory"); -} - void __init plat_mem_setup(void) { board_time_init = tx4938_time_init; - __wbflush = tx4938_write_buffer_flush; toshiba_rbtx4938_setup(); } diff --git a/arch/mips/tx4938/toshiba_rbtx4938/irq.c b/arch/mips/tx4938/toshiba_rbtx4938/irq.c index bbb3390e98f7..102e473c10a2 100644 --- a/arch/mips/tx4938/toshiba_rbtx4938/irq.c +++ b/arch/mips/tx4938/toshiba_rbtx4938/irq.c @@ -83,6 +83,7 @@ IRQ Device #include <asm/processor.h> #include <asm/reboot.h> #include <asm/time.h> +#include <asm/wbflush.h> #include <linux/bootmem.h> #include <asm/tx4938/rbtx4938.h> diff --git a/arch/powerpc/platforms/82xx/mpc82xx.c b/arch/powerpc/platforms/82xx/mpc82xx.c index 89d702de4863..0f5b30dc60da 100644 --- a/arch/powerpc/platforms/82xx/mpc82xx.c +++ b/arch/powerpc/platforms/82xx/mpc82xx.c @@ -11,7 +11,6 @@ * option) any later version. */ -#include <linux/config.h> #include <linux/stddef.h> #include <linux/kernel.h> #include <linux/init.h> diff --git a/arch/powerpc/platforms/82xx/mpc82xx_ads.c b/arch/powerpc/platforms/82xx/mpc82xx_ads.c index 0cea42a8053d..bb9acbb98176 100644 --- a/arch/powerpc/platforms/82xx/mpc82xx_ads.c +++ b/arch/powerpc/platforms/82xx/mpc82xx_ads.c @@ -12,8 +12,6 @@ * option) any later version. */ - -#include <linux/config.h> #include <linux/stddef.h> #include <linux/kernel.h> #include <linux/init.h> diff --git a/arch/powerpc/platforms/82xx/pq2ads.h b/arch/powerpc/platforms/82xx/pq2ads.h index a7348213508f..fb2f92bcd770 100644 --- a/arch/powerpc/platforms/82xx/pq2ads.h +++ b/arch/powerpc/platforms/82xx/pq2ads.h @@ -22,8 +22,6 @@ #ifndef __MACH_ADS8260_DEFS #define __MACH_ADS8260_DEFS -#include <linux/config.h> - #include <asm/ppcboot.h> /* For our show_cpuinfo hooks. */ diff --git a/arch/powerpc/sysdev/qe_lib/qe_io.c b/arch/powerpc/sysdev/qe_lib/qe_io.c index aea435970389..0afe6bfe3714 100644 --- a/arch/powerpc/sysdev/qe_lib/qe_io.c +++ b/arch/powerpc/sysdev/qe_lib/qe_io.c @@ -14,7 +14,6 @@ * option) any later version. */ -#include <linux/config.h> #include <linux/stddef.h> #include <linux/kernel.h> #include <linux/init.h> diff --git a/arch/sparc/kernel/prom.c b/arch/sparc/kernel/prom.c index 4ca9e5fc97f4..2cc302b6bec0 100644 --- a/arch/sparc/kernel/prom.c +++ b/arch/sparc/kernel/prom.c @@ -243,7 +243,7 @@ int of_set_property(struct device_node *dp, const char *name, void *val, int len void *old_val = prop->value; int ret; - ret = prom_setprop(dp->node, name, val, len); + ret = prom_setprop(dp->node, (char *) name, val, len); err = -EINVAL; if (ret >= 0) { prop->value = new_val; @@ -477,7 +477,10 @@ static struct property * __init build_one_prop(phandle node, char *prev, char *s p->length = 0; } else { p->value = prom_early_alloc(p->length + 1); - prom_getproperty(node, p->name, p->value, p->length); + len = prom_getproperty(node, p->name, p->value, + p->length); + if (len <= 0) + p->length = 0; ((unsigned char *)p->value)[p->length] = '\0'; } } diff --git a/arch/sparc64/defconfig b/arch/sparc64/defconfig index f54ab375464b..dcae559879ae 100644 --- a/arch/sparc64/defconfig +++ b/arch/sparc64/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18 -# Mon Oct 2 14:24:40 2006 +# Linux kernel version: 2.6.19-rc1 +# Thu Oct 5 02:08:41 2006 # CONFIG_SPARC=y CONFIG_SPARC64=y @@ -197,6 +197,7 @@ CONFIG_INET_XFRM_TUNNEL=y CONFIG_INET_TUNNEL=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -214,6 +215,7 @@ CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m CONFIG_INET6_XFRM_MODE_TRANSPORT=m CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_TUNNEL=m # CONFIG_IPV6_SUBTREES is not set @@ -373,6 +375,7 @@ CONFIG_BLK_DEV_ALI15X3=y # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set # CONFIG_BLK_DEV_IT821X is not set @@ -449,10 +452,10 @@ CONFIG_ISCSI_TCP=m # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLOGICPTI is not set # CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -478,6 +481,7 @@ CONFIG_MD_RAID456=m CONFIG_MD_MULTIPATH=m # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m +# CONFIG_DM_DEBUG is not set CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m @@ -840,12 +844,12 @@ CONFIG_HWMON=y # # Misc devices # +# CONFIG_TIFM_CORE is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -858,6 +862,7 @@ CONFIG_VIDEO_V4L2=y # # CONFIG_FIRMWARE_EDID is not set CONFIG_FB=y +CONFIG_FB_DDC=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y @@ -1236,6 +1241,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -1279,6 +1285,7 @@ CONFIG_RAMFS=y # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set @@ -1355,6 +1362,10 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_UTF8 is not set # +# Distributed Lock Manager +# + +# # Instrumentation Support # CONFIG_PROFILING=y diff --git a/arch/sparc64/kernel/of_device.c b/arch/sparc64/kernel/of_device.c index 7f9204535770..d822c7c18e1f 100644 --- a/arch/sparc64/kernel/of_device.c +++ b/arch/sparc64/kernel/of_device.c @@ -841,7 +841,7 @@ static struct of_device * __init scan_one_device(struct device_node *dp, if (!parent) strcpy(op->dev.bus_id, "root"); else - strcpy(op->dev.bus_id, dp->path_component_name); + sprintf(op->dev.bus_id, "%s@%08x", dp->name, dp->node); if (of_device_register(op)) { printk("%s: Could not register of device.\n", diff --git a/arch/um/drivers/pcap_user.h b/arch/um/drivers/pcap_user.h index 58f9f6a1420f..96b80b565eeb 100644 --- a/arch/um/drivers/pcap_user.h +++ b/arch/um/drivers/pcap_user.h @@ -15,7 +15,7 @@ struct pcap_data { void *dev; }; -extern struct net_user_info pcap_user_info; +extern const struct net_user_info pcap_user_info; extern int pcap_user_read(int fd, void *buf, int len, struct pcap_data *pri); diff --git a/arch/x86_64/ia32/ptrace32.c b/arch/x86_64/ia32/ptrace32.c index d18198ed636b..3a7561d4703e 100644 --- a/arch/x86_64/ia32/ptrace32.c +++ b/arch/x86_64/ia32/ptrace32.c @@ -205,9 +205,9 @@ static int getreg32(struct task_struct *child, unsigned regno, u32 *val) static long ptrace32_siginfo(unsigned request, u32 pid, u32 addr, u32 data) { int ret; - compat_siginfo_t *si32 = (compat_siginfo_t *)compat_ptr(data); + compat_siginfo_t __user *si32 = compat_ptr(data); siginfo_t ssi; - siginfo_t *si = compat_alloc_user_space(sizeof(siginfo_t)); + siginfo_t __user *si = compat_alloc_user_space(sizeof(siginfo_t)); if (request == PTRACE_SETSIGINFO) { memset(&ssi, 0, sizeof(siginfo_t)); ret = copy_siginfo_from_user32(&ssi, si32); |