1454 files changed, 49768 insertions, 29924 deletions

diff --git a/arch/Kconfig b/arch/Kconfig
index 678a80713b21..9af3a597cc67 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -24,9 +24,6 @@ config KEXEC_ELF
 config HAVE_IMA_KEXEC
 	bool
 
-config SET_FS
-	bool
-
 config HOTPLUG_SMT
 	bool
 
@@ -599,21 +596,22 @@ config STACKPROTECTOR_STRONG
 config ARCH_SUPPORTS_SHADOW_CALL_STACK
 	bool
 	help
-	  An architecture should select this if it supports Clang's Shadow
-	  Call Stack and implements runtime support for shadow stack
+	  An architecture should select this if it supports the compiler's
+	  Shadow Call Stack and implements runtime support for shadow stack
 	  switching.
 
 config SHADOW_CALL_STACK
-	bool "Clang Shadow Call Stack"
-	depends on CC_IS_CLANG && ARCH_SUPPORTS_SHADOW_CALL_STACK
+	bool "Shadow Call Stack"
+	depends on ARCH_SUPPORTS_SHADOW_CALL_STACK
 	depends on DYNAMIC_FTRACE_WITH_REGS || !FUNCTION_GRAPH_TRACER
 	help
-	  This option enables Clang's Shadow Call Stack, which uses a
-	  shadow stack to protect function return addresses from being
-	  overwritten by an attacker. More information can be found in
-	  Clang's documentation:
+	  This option enables the compiler's Shadow Call Stack, which
+	  uses a shadow stack to protect function return addresses from
+	  being overwritten by an attacker. More information can be found
+	  in the compiler's documentation:
 
-	    https://clang.llvm.org/docs/ShadowCallStack.html
+	  - Clang: https://clang.llvm.org/docs/ShadowCallStack.html
+	  - GCC: https://gcc.gnu.org/onlinedocs/gcc/Instrumentation-Options.html#Instrumentation-Options
 
 	  Note that security guarantees in the kernel differ from the
 	  ones documented for user space. The kernel must store addresses
@@ -898,6 +896,13 @@ config HAVE_SOFTIRQ_ON_OWN_STACK
 	  Architecture provides a function to run __do_softirq() on a
 	  separate stack.
 
+config ALTERNATE_USER_ADDRESS_SPACE
+	bool
+	help
+	  Architectures set this when the CPU uses separate address
+	  spaces for kernel and user space pointers. In this case, the
+	  access_ok() check on a __user pointer is skipped.
+
 config PGTABLE_LEVELS
 	int
 	default 2
@@ -1159,16 +1164,30 @@ config HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET
 	  to the compiler, so it will attempt to add canary checks regardless
 	  of the static branch state.
 
-config RANDOMIZE_KSTACK_OFFSET_DEFAULT
-	bool "Randomize kernel stack offset on syscall entry"
+config RANDOMIZE_KSTACK_OFFSET
+	bool "Support for randomizing kernel stack offset on syscall entry" if EXPERT
+	default y
 	depends on HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET
+	depends on INIT_STACK_NONE || !CC_IS_CLANG || CLANG_VERSION >= 140000
 	help
 	  The kernel stack offset can be randomized (after pt_regs) by
 	  roughly 5 bits of entropy, frustrating memory corruption
 	  attacks that depend on stack address determinism or
-	  cross-syscall address exposures. This feature is controlled
-	  by kernel boot param "randomize_kstack_offset=on/off", and this
-	  config chooses the default boot state.
+	  cross-syscall address exposures.
+
+	  The feature is controlled via the "randomize_kstack_offset=on/off"
+	  kernel boot param, and if turned off has zero overhead due to its use
+	  of static branches (see JUMP_LABEL).
+
+	  If unsure, say Y.
+
+config RANDOMIZE_KSTACK_OFFSET_DEFAULT
+	bool "Default state of kernel stack offset randomization"
+	depends on RANDOMIZE_KSTACK_OFFSET
+	help
+	  Kernel stack offset randomization is controlled by kernel boot param
+	  "randomize_kstack_offset=on/off", and this config chooses the default
+	  boot state.
 
 config ARCH_OPTIONAL_KERNEL_RWX
 	def_bool n
@@ -1278,12 +1297,41 @@ config HAVE_STATIC_CALL_INLINE
 
 config HAVE_PREEMPT_DYNAMIC
 	bool
+
+config HAVE_PREEMPT_DYNAMIC_CALL
+	bool
 	depends on HAVE_STATIC_CALL
-	depends on GENERIC_ENTRY
+	select HAVE_PREEMPT_DYNAMIC
 	help
-	   Select this if the architecture support boot time preempt setting
-	   on top of static calls. It is strongly advised to support inline
-	   static call to avoid any overhead.
+	   An architecture should select this if it can handle the preemption
+	   model being selected at boot time using static calls.
+
+	   Where an architecture selects HAVE_STATIC_CALL_INLINE, any call to a
+	   preemption function will be patched directly.
+
+	   Where an architecture does not select HAVE_STATIC_CALL_INLINE, any
+	   call to a preemption function will go through a trampoline, and the
+	   trampoline will be patched.
+
+	   It is strongly advised to support inline static call to avoid any
+	   overhead.
+
+config HAVE_PREEMPT_DYNAMIC_KEY
+	bool
+	depends on HAVE_ARCH_JUMP_LABEL && CC_HAS_ASM_GOTO
+	select HAVE_PREEMPT_DYNAMIC
+	help
+	   An architecture should select this if it can handle the preemption
+	   model being selected at boot time using static keys.
+
+	   Each preemption function will be given an early return based on a
+	   static key. This should have slightly lower overhead than non-inline
+	   static calls, as this effectively inlines each trampoline into the
+	   start of its callee. This may avoid redundant work, and may
+	   integrate better with CFI schemes.
+
+	   This will have greater overhead than using inline static calls as
+	   the call to the preemption function cannot be entirely elided.
 
 config ARCH_WANT_LD_ORPHAN_WARN
 	bool
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 4e87783c90ad..7d0d26b5b3f5 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -12,7 +12,6 @@ config ALPHA
 	select FORCE_PCI if !ALPHA_JENSEN
 	select PCI_DOMAINS if PCI
 	select PCI_SYSCALL if PCI
-	select HAVE_AOUT
 	select HAVE_ASM_MODVERSIONS
 	select HAVE_PCSPKR_PLATFORM
 	select HAVE_PERF_EVENTS
@@ -35,7 +34,6 @@ config ALPHA
 	select OLD_SIGSUSPEND
 	select CPU_NO_EFFICIENT_FFS if !ALPHA_EV67
 	select MMU_GATHER_NO_RANGE
-	select SET_FS
 	select SPARSEMEM_EXTREME if SPARSEMEM
 	select ZONE_DMA
 	help
diff --git a/arch/alpha/configs/defconfig b/arch/alpha/configs/defconfig
index 7f1ca30b115b..7e9336930880 100644
--- a/arch/alpha/configs/defconfig
+++ b/arch/alpha/configs/defconfig
@@ -62,7 +62,6 @@ CONFIG_TMPFS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
diff --git a/arch/alpha/include/asm/pgtable.h b/arch/alpha/include/asm/pgtable.h
index 02f0429f1068..170451fde043 100644
--- a/arch/alpha/include/asm/pgtable.h
+++ b/arch/alpha/include/asm/pgtable.h
@@ -233,6 +233,7 @@ pmd_page_vaddr(pmd_t pmd)
 	return ((pmd_val(pmd) & _PFN_MASK) >> (32-PAGE_SHIFT)) + PAGE_OFFSET;
 }
 
+#define pmd_pfn(pmd)	(pmd_val(pmd) >> 32)
 #define pmd_page(pmd)	(pfn_to_page(pmd_val(pmd) >> 32))
 #define pud_page(pud)	(pfn_to_page(pud_val(pud) >> 32))
 
diff --git a/arch/alpha/include/asm/processor.h b/arch/alpha/include/asm/processor.h
index 090499c99c1c..43e234c518b1 100644
--- a/arch/alpha/include/asm/processor.h
+++ b/arch/alpha/include/asm/processor.h
@@ -26,10 +26,6 @@
 #define TASK_UNMAPPED_BASE \
   ((current->personality & ADDR_LIMIT_32BIT) ? 0x40000000 : TASK_SIZE / 2)
 
-typedef struct {
-	unsigned long seg;
-} mm_segment_t;
-
 /* This is dead.  Everything has been moved to thread_info.  */
 struct thread_struct { };
 #define INIT_THREAD  { }
diff --git a/arch/alpha/include/asm/thread_info.h b/arch/alpha/include/asm/thread_info.h
index 2592356e3215..fdc485d7787a 100644
--- a/arch/alpha/include/asm/thread_info.h
+++ b/arch/alpha/include/asm/thread_info.h
@@ -19,7 +19,6 @@ struct thread_info {
 	unsigned int		flags;		/* low level flags */
 	unsigned int		ieee_state;	/* see fpu.h */
 
-	mm_segment_t		addr_limit;	/* thread address space */
 	unsigned		cpu;		/* current CPU */
 	int			preempt_count; /* 0 => preemptable, <0 => BUG */
 	unsigned int		status;		/* thread-synchronous flags */
@@ -35,7 +34,6 @@ struct thread_info {
 #define INIT_THREAD_INFO(tsk)			\
 {						\
 	.task		= &tsk,			\
-	.addr_limit	= KERNEL_DS,		\
 	.preempt_count	= INIT_PREEMPT_COUNT,	\
 }
 
diff --git a/arch/alpha/include/asm/uaccess.h b/arch/alpha/include/asm/uaccess.h
index 1b6f25efa247..c32c2584c0b7 100644
--- a/arch/alpha/include/asm/uaccess.h
+++ b/arch/alpha/include/asm/uaccess.h
@@ -2,47 +2,7 @@
 #ifndef __ALPHA_UACCESS_H
 #define __ALPHA_UACCESS_H
 
-/*
- * The fs value determines whether argument validity checking should be
- * performed or not.  If get_fs() == USER_DS, checking is performed, with
- * get_fs() == KERNEL_DS, checking is bypassed.
- *
- * Or at least it did once upon a time.  Nowadays it is a mask that
- * defines which bits of the address space are off limits.  This is a
- * wee bit faster than the above.
- *
- * For historical reasons, these macros are grossly misnamed.
- */
-
-#define KERNEL_DS	((mm_segment_t) { 0UL })
-#define USER_DS		((mm_segment_t) { -0x40000000000UL })
-
-#define get_fs()  (current_thread_info()->addr_limit)
-#define set_fs(x) (current_thread_info()->addr_limit = (x))
-
-#define uaccess_kernel()	(get_fs().seg == KERNEL_DS.seg)
-
-/*
- * Is a address valid? This does a straightforward calculation rather
- * than tests.
- *
- * Address valid if:
- *  - "addr" doesn't have any high-bits set
- *  - AND "size" doesn't have any high-bits set
- *  - AND "addr+size-(size != 0)" doesn't have any high-bits set
- *  - OR we are in kernel mode.
- */
-#define __access_ok(addr, size) ({				\
-	unsigned long __ao_a = (addr), __ao_b = (size);		\
-	unsigned long __ao_end = __ao_a + __ao_b - !!__ao_b;	\
-	(get_fs().seg & (__ao_a | __ao_b | __ao_end)) == 0; })
-
-#define access_ok(addr, size)				\
-({							\
-	__chk_user_ptr(addr);				\
-	__access_ok(((unsigned long)(addr)), (size));	\
-})
-
+#include <asm-generic/access_ok.h>
 /*
  * These are the main single-value transfer routines.  They automatically
  * use the right size if we just have the right pointer type.
@@ -105,7 +65,7 @@ extern void __get_user_unknown(void);
 	long __gu_err = -EFAULT;				\
 	unsigned long __gu_val = 0;				\
 	const __typeof__(*(ptr)) __user *__gu_addr = (ptr);	\
-	if (__access_ok((unsigned long)__gu_addr, size)) {	\
+	if (__access_ok(__gu_addr, size)) {			\
 		__gu_err = 0;					\
 		switch (size) {					\
 		  case 1: __get_user_8(__gu_addr); break;	\
@@ -200,7 +160,7 @@ extern void __put_user_unknown(void);
 ({								\
 	long __pu_err = -EFAULT;				\
 	__typeof__(*(ptr)) __user *__pu_addr = (ptr);		\
-	if (__access_ok((unsigned long)__pu_addr, size)) {	\
+	if (__access_ok(__pu_addr, size)) {			\
 		__pu_err = 0;					\
 		switch (size) {					\
 		  case 1: __put_user_8(x, __pu_addr); break;	\
@@ -316,17 +276,14 @@ raw_copy_to_user(void __user *to, const void *from, unsigned long len)
 
 extern long __clear_user(void __user *to, long len);
 
-extern inline long
+static inline long
 clear_user(void __user *to, long len)
 {
-	if (__access_ok((unsigned long)to, len))
+	if (__access_ok(to, len))
 		len = __clear_user(to, len);
 	return len;
 }
 
-#define user_addr_max() \
-        (uaccess_kernel() ? ~0UL : TASK_SIZE)
-
 extern long strncpy_from_user(char *dest, const char __user *src, long count);
 extern __must_check long strnlen_user(const char __user *str, long n);
 
diff --git a/arch/alpha/include/asm/xor.h b/arch/alpha/include/asm/xor.h
index 5aeb4fb3cb7c..e0de0c233ab9 100644
--- a/arch/alpha/include/asm/xor.h
+++ b/arch/alpha/include/asm/xor.h
@@ -5,24 +5,43 @@
  * Optimized RAID-5 checksumming functions for alpha EV5 and EV6
  */
 
-extern void xor_alpha_2(unsigned long, unsigned long *, unsigned long *);
-extern void xor_alpha_3(unsigned long, unsigned long *, unsigned long *,
-		        unsigned long *);
-extern void xor_alpha_4(unsigned long, unsigned long *, unsigned long *,
-		        unsigned long *, unsigned long *);
-extern void xor_alpha_5(unsigned long, unsigned long *, unsigned long *,
-		        unsigned long *, unsigned long *, unsigned long *);
+extern void
+xor_alpha_2(unsigned long bytes, unsigned long * __restrict p1,
+	    const unsigned long * __restrict p2);
+extern void
+xor_alpha_3(unsigned long bytes, unsigned long * __restrict p1,
+	    const unsigned long * __restrict p2,
+	    const unsigned long * __restrict p3);
+extern void
+xor_alpha_4(unsigned long bytes, unsigned long * __restrict p1,
+	    const unsigned long * __restrict p2,
+	    const unsigned long * __restrict p3,
+	    const unsigned long * __restrict p4);
+extern void
+xor_alpha_5(unsigned long bytes, unsigned long * __restrict p1,
+	    const unsigned long * __restrict p2,
+	    const unsigned long * __restrict p3,
+	    const unsigned long * __restrict p4,
+	    const unsigned long * __restrict p5);
 
-extern void xor_alpha_prefetch_2(unsigned long, unsigned long *,
-				 unsigned long *);
-extern void xor_alpha_prefetch_3(unsigned long, unsigned long *,
-				 unsigned long *, unsigned long *);
-extern void xor_alpha_prefetch_4(unsigned long, unsigned long *,
-				 unsigned long *, unsigned long *,
-				 unsigned long *);
-extern void xor_alpha_prefetch_5(unsigned long, unsigned long *,
-				 unsigned long *, unsigned long *,
-				 unsigned long *, unsigned long *);
+extern void
+xor_alpha_prefetch_2(unsigned long bytes, unsigned long * __restrict p1,
+		     const unsigned long * __restrict p2);
+extern void
+xor_alpha_prefetch_3(unsigned long bytes, unsigned long * __restrict p1,
+		     const unsigned long * __restrict p2,
+		     const unsigned long * __restrict p3);
+extern void
+xor_alpha_prefetch_4(unsigned long bytes, unsigned long * __restrict p1,
+		     const unsigned long * __restrict p2,
+		     const unsigned long * __restrict p3,
+		     const unsigned long * __restrict p4);
+extern void
+xor_alpha_prefetch_5(unsigned long bytes, unsigned long * __restrict p1,
+		     const unsigned long * __restrict p2,
+		     const unsigned long * __restrict p3,
+		     const unsigned long * __restrict p4,
+		     const unsigned long * __restrict p5);
 
 asm("								\n\
 	.text							\n\
diff --git a/arch/alpha/include/uapi/asm/signal.h b/arch/alpha/include/uapi/asm/signal.h
index a69dd8d080a8..1413075f7616 100644
--- a/arch/alpha/include/uapi/asm/signal.h
+++ b/arch/alpha/include/uapi/asm/signal.h
@@ -100,7 +100,7 @@ struct sigaction {
 typedef struct sigaltstack {
 	void __user *ss_sp;
 	int ss_flags;
-	size_t ss_size;
+	__kernel_size_t ss_size;
 } stack_t;
 
 /* sigstack(2) is deprecated, and will be withdrawn in a future version
diff --git a/arch/alpha/mm/init.c b/arch/alpha/mm/init.c
index f6114d03357c..7511723b7669 100644
--- a/arch/alpha/mm/init.c
+++ b/arch/alpha/mm/init.c
@@ -76,14 +76,14 @@ pgd_alloc(struct mm_struct *mm)
 pmd_t *
 __bad_pagetable(void)
 {
-	memset((void *) EMPTY_PGT, 0, PAGE_SIZE);
+	memset(absolute_pointer(EMPTY_PGT), 0, PAGE_SIZE);
 	return (pmd_t *) EMPTY_PGT;
 }
 
 pte_t
 __bad_page(void)
 {
-	memset((void *) EMPTY_PGE, 0, PAGE_SIZE);
+	memset(absolute_pointer(EMPTY_PGE), 0, PAGE_SIZE);
 	return pte_mkdirty(mk_pte(virt_to_page(EMPTY_PGE), PAGE_SHARED));
 }
 
@@ -253,7 +253,7 @@ void __init paging_init(void)
 	free_area_init(max_zone_pfn);
 
 	/* Initialize the kernel's ZERO_PGE. */
-	memset((void *)ZERO_PGE, 0, PAGE_SIZE);
+	memset(absolute_pointer(ZERO_PGE), 0, PAGE_SIZE);
 }
 
 #if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_SRM)
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index 3c2a4753d09b..e0a60a27e14d 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -45,7 +45,6 @@ config ARC
 	select PCI_SYSCALL if PCI
 	select PERF_USE_VMALLOC if ARC_CACHE_VIPT_ALIASING
 	select HAVE_ARCH_JUMP_LABEL if ISA_ARCV2 && !CPU_ENDIAN_BE32
-	select SET_FS
 	select TRACE_IRQFLAGS_SUPPORT
 
 config LOCKDEP_SUPPORT
diff --git a/arch/arc/include/asm/hugepage.h b/arch/arc/include/asm/hugepage.h
index 11b0ff26b97b..5001b796fb8d 100644
--- a/arch/arc/include/asm/hugepage.h
+++ b/arch/arc/include/asm/hugepage.h
@@ -31,7 +31,6 @@ static inline pmd_t pte_pmd(pte_t pte)
 
 #define pmd_write(pmd)		pte_write(pmd_pte(pmd))
 #define pmd_young(pmd)		pte_young(pmd_pte(pmd))
-#define pmd_pfn(pmd)		pte_pfn(pmd_pte(pmd))
 #define pmd_dirty(pmd)		pte_dirty(pmd_pte(pmd))
 
 #define mk_pmd(page, prot)	pte_pmd(mk_pte(page, prot))
diff --git a/arch/arc/include/asm/pgtable-levels.h b/arch/arc/include/asm/pgtable-levels.h
index 8084ef2f6491..7848348719b2 100644
--- a/arch/arc/include/asm/pgtable-levels.h
+++ b/arch/arc/include/asm/pgtable-levels.h
@@ -161,6 +161,7 @@
 #define pmd_present(x)		(pmd_val(x))
 #define pmd_clear(xp)		do { pmd_val(*(xp)) = 0; } while (0)
 #define pmd_page_vaddr(pmd)	(pmd_val(pmd) & PAGE_MASK)
+#define pmd_pfn(pmd)		((pmd_val(pmd) & PAGE_MASK) >> PAGE_SHIFT)
 #define pmd_page(pmd)		virt_to_page(pmd_page_vaddr(pmd))
 #define set_pmd(pmdp, pmd)	(*(pmdp) = pmd)
 #define pmd_pgtable(pmd)	((pgtable_t) pmd_page_vaddr(pmd))
diff --git a/arch/arc/include/asm/segment.h b/arch/arc/include/asm/segment.h
deleted file mode 100644
index 871f8ab11bfd..000000000000
--- a/arch/arc/include/asm/segment.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
- */
-
-#ifndef __ASMARC_SEGMENT_H
-#define __ASMARC_SEGMENT_H
-
-#ifndef __ASSEMBLY__
-
-typedef unsigned long mm_segment_t;
-
-#define MAKE_MM_SEG(s)	((mm_segment_t) { (s) })
-
-#define KERNEL_DS		MAKE_MM_SEG(0)
-#define USER_DS			MAKE_MM_SEG(TASK_SIZE)
-#define uaccess_kernel()	(get_fs() == KERNEL_DS)
-
-#endif /* __ASSEMBLY__ */
-#endif /* __ASMARC_SEGMENT_H */
diff --git a/arch/arc/include/asm/thread_info.h b/arch/arc/include/asm/thread_info.h
index d36863e34bfc..1e0b2e3914d5 100644
--- a/arch/arc/include/asm/thread_info.h
+++ b/arch/arc/include/asm/thread_info.h
@@ -27,7 +27,6 @@
 #ifndef __ASSEMBLY__
 
 #include <linux/thread_info.h>
-#include <asm/segment.h>
 
 /*
  * low level task data that entry.S needs immediate access to
@@ -40,7 +39,6 @@ struct thread_info {
 	unsigned long flags;		/* low level flags */
 	int preempt_count;		/* 0 => preemptable, <0 => BUG */
 	struct task_struct *task;	/* main task structure */
-	mm_segment_t addr_limit;	/* thread address space */
 	__u32 cpu;			/* current CPU */
 	unsigned long thr_ptr;		/* TLS ptr */
 };
@@ -56,7 +54,6 @@ struct thread_info {
 	.flags      = 0,			\
 	.cpu        = 0,			\
 	.preempt_count  = INIT_PREEMPT_COUNT,	\
-	.addr_limit = KERNEL_DS,		\
 }
 
 static inline __attribute_const__ struct thread_info *current_thread_info(void)
diff --git a/arch/arc/include/asm/uaccess.h b/arch/arc/include/asm/uaccess.h
index 783bfdb3bfa3..99712471c96a 100644
--- a/arch/arc/include/asm/uaccess.h
+++ b/arch/arc/include/asm/uaccess.h
@@ -23,35 +23,6 @@
 
 #include <linux/string.h>	/* for generic string functions */
 
-
-#define __kernel_ok		(uaccess_kernel())
-
-/*
- * Algorithmically, for __user_ok() we want do:
- * 	(start < TASK_SIZE) && (start+len < TASK_SIZE)
- * where TASK_SIZE could either be retrieved from thread_info->addr_limit or
- * emitted directly in code.
- *
- * This can however be rewritten as follows:
- *	(len <= TASK_SIZE) && (start+len < TASK_SIZE)
- *
- * Because it essentially checks if buffer end is within limit and @len is
- * non-ngeative, which implies that buffer start will be within limit too.
- *
- * The reason for rewriting being, for majority of cases, @len is generally
- * compile time constant, causing first sub-expression to be compile time
- * subsumed.
- *
- * The second part would generate weird large LIMMs e.g. (0x6000_0000 - 0x10),
- * so we check for TASK_SIZE using get_fs() since the addr_limit load from mem
- * would already have been done at this call site for __kernel_ok()
- *
- */
-#define __user_ok(addr, sz)	(((sz) <= TASK_SIZE) && \
-				 ((addr) <= (get_fs() - (sz))))
-#define __access_ok(addr, sz)	(unlikely(__kernel_ok) || \
-				 likely(__user_ok((addr), (sz))))
-
 /*********** Single byte/hword/word copies ******************/
 
 #define __get_user_fn(sz, u, k)					\
@@ -667,7 +638,6 @@ extern unsigned long arc_clear_user_noinline(void __user *to,
 #define __clear_user(d, n)		arc_clear_user_noinline(d, n)
 #endif
 
-#include <asm/segment.h>
 #include <asm-generic/uaccess.h>
 
 #endif
diff --git a/arch/arc/kernel/process.c b/arch/arc/kernel/process.c
index 8e90052f6f05..5f7f5aab361f 100644
--- a/arch/arc/kernel/process.c
+++ b/arch/arc/kernel/process.c
@@ -43,7 +43,7 @@ SYSCALL_DEFINE0(arc_gettls)
 	return task_thread_info(current)->thr_ptr;
 }
 
-SYSCALL_DEFINE3(arc_usr_cmpxchg, int *, uaddr, int, expected, int, new)
+SYSCALL_DEFINE3(arc_usr_cmpxchg, int __user *, uaddr, int, expected, int, new)
 {
 	struct pt_regs *regs = current_pt_regs();
 	u32 uval;
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 4c97cb40eebb..c1251856ef77 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -5,6 +5,7 @@ config ARM
 	select ARCH_32BIT_OFF_T
 	select ARCH_CORRECT_STACKTRACE_ON_KRETPROBE if HAVE_KRETPROBES && FRAME_POINTER && !ARM_UNWIND
 	select ARCH_HAS_BINFMT_FLAT
+	select ARCH_HAS_CURRENT_STACK_POINTER
 	select ARCH_HAS_DEBUG_VIRTUAL if MMU
 	select ARCH_HAS_DMA_WRITE_COMBINE if !ARM_DMA_MEM_BUFFERABLE
 	select ARCH_HAS_ELF_RANDOMIZE
@@ -37,6 +38,7 @@ config ARM
 	select ARCH_USE_CMPXCHG_LOCKREF
 	select ARCH_USE_MEMTEST
 	select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT if MMU
+	select ARCH_WANT_GENERAL_HUGETLB
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select ARCH_WANT_LD_ORPHAN_WARN
 	select BINFMT_FLAT_ARGVP_ENVP_ON_STACK
@@ -58,6 +60,7 @@ config ARM
 	select GENERIC_CPU_AUTOPROBE
 	select GENERIC_EARLY_IOREMAP
 	select GENERIC_IDLE_POLL_SETUP
+	select GENERIC_IRQ_MULTI_HANDLER
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW
 	select GENERIC_IRQ_SHOW_LEVEL
@@ -92,8 +95,8 @@ config ARM
 	select HAVE_EXIT_THREAD
 	select HAVE_FAST_GUP if ARM_LPAE
 	select HAVE_FTRACE_MCOUNT_RECORD if !XIP_KERNEL
-	select HAVE_FUNCTION_GRAPH_TRACER if !THUMB2_KERNEL && !CC_IS_CLANG
-	select HAVE_FUNCTION_TRACER if !XIP_KERNEL && !(THUMB2_KERNEL && CC_IS_CLANG)
+	select HAVE_FUNCTION_GRAPH_TRACER
+	select HAVE_FUNCTION_TRACER if !XIP_KERNEL
 	select HAVE_GCC_PLUGINS
 	select HAVE_HW_BREAKPOINT if PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7)
 	select HAVE_IRQ_TIME_ACCOUNTING
@@ -127,7 +130,8 @@ config ARM
 	select PERF_USE_VMALLOC
 	select RTC_LIB
 	select SYS_SUPPORTS_APM_EMULATION
-	select THREAD_INFO_IN_TASK if CURRENT_POINTER_IN_TPIDRURO
+	select THREAD_INFO_IN_TASK
+	select HAVE_ARCH_VMAP_STACK if MMU && ARM_HAS_GROUP_RELOCS
 	select TRACE_IRQFLAGS_SUPPORT if !CPU_V7M
 	# Above selects are sorted alphabetically; please add new ones
 	# according to that.  Thanks.
@@ -139,6 +143,17 @@ config ARM
 	  Europe.  There is an ARM Linux project with a web page at
 	  <http://www.arm.linux.org.uk/>.
 
+config ARM_HAS_GROUP_RELOCS
+	def_bool y
+	depends on !LD_IS_LLD || LLD_VERSION >= 140000
+	depends on !COMPILE_TEST
+	help
+	  Whether or not to use R_ARM_ALU_PC_Gn or R_ARM_LDR_PC_Gn group
+	  relocations, which have been around for a long time, but were not
+	  supported in LLD until version 14. The combined range is -/+ 256 MiB,
+	  which is usually sufficient, but not for allyesconfig, so we disable
+	  this feature when doing compile testing.
+
 config ARM_HAS_SG_CHAIN
 	bool
 
@@ -218,18 +233,12 @@ config ARCH_MAY_HAVE_PC_FDC
 config ARCH_SUPPORTS_UPROBES
 	def_bool y
 
-config ARCH_HAS_DMA_SET_COHERENT_MASK
-	bool
-
 config GENERIC_ISA_DMA
 	bool
 
 config FIQ
 	bool
 
-config NEED_RET_TO_USER
-	bool
-
 config ARCH_MTD_XIP
 	bool
 
@@ -267,7 +276,7 @@ config PHYS_OFFSET
 	hex "Physical address of main memory" if MMU
 	depends on !ARM_PATCH_PHYS_VIRT
 	default DRAM_BASE if !MMU
-	default 0x00000000 if ARCH_FOOTBRIDGE || ARCH_IXP4XX
+	default 0x00000000 if ARCH_FOOTBRIDGE
 	default 0x10000000 if ARCH_OMAP1 || ARCH_RPC
 	default 0x30000000 if ARCH_S3C24XX
 	default 0xa0000000 if ARCH_IOP32X || ARCH_PXA
@@ -295,6 +304,17 @@ config MMU
 	  Select if you want MMU-based virtualised addressing space
 	  support by paged memory management. If unsure, say 'Y'.
 
+config ARM_SINGLE_ARMV7M
+	def_bool !MMU
+	select ARM_NVIC
+	select AUTO_ZRELADDR
+	select TIMER_OF
+	select COMMON_CLK
+	select CPU_V7M
+	select NO_IOPORT_MAP
+	select SPARSE_IRQ
+	select USE_OF
+
 config ARCH_MMAP_RND_BITS_MIN
 	default 8
 
@@ -309,12 +329,11 @@ config ARCH_MMAP_RND_BITS_MAX
 #
 choice
 	prompt "ARM system type"
-	default ARM_SINGLE_ARMV7M if !MMU
-	default ARCH_MULTIPLATFORM if MMU
+	depends on MMU
+	default ARCH_MULTIPLATFORM
 
 config ARCH_MULTIPLATFORM
 	bool "Allow multiple platforms to be selected"
-	depends on MMU
 	select ARCH_FLATMEM_ENABLE
 	select ARCH_SPARSEMEM_ENABLE
 	select ARCH_SELECT_MEMORY_MODEL
@@ -323,31 +342,17 @@ config ARCH_MULTIPLATFORM
 	select AUTO_ZRELADDR
 	select TIMER_OF
 	select COMMON_CLK
-	select GENERIC_IRQ_MULTI_HANDLER
 	select HAVE_PCI
 	select PCI_DOMAINS_GENERIC if PCI
 	select SPARSE_IRQ
 	select USE_OF
 
-config ARM_SINGLE_ARMV7M
-	bool "ARMv7-M based platforms (Cortex-M0/M3/M4)"
-	depends on !MMU
-	select ARM_NVIC
-	select AUTO_ZRELADDR
-	select TIMER_OF
-	select COMMON_CLK
-	select CPU_V7M
-	select NO_IOPORT_MAP
-	select SPARSE_IRQ
-	select USE_OF
-
 config ARCH_EP93XX
 	bool "EP93xx-based"
 	select ARCH_SPARSEMEM_ENABLE
 	select ARM_AMBA
 	imply ARM_PATCH_PHYS_VIRT
 	select ARM_VIC
-	select GENERIC_IRQ_MULTI_HANDLER
 	select AUTO_ZRELADDR
 	select CLKSRC_MMIO
 	select CPU_ARM920T
@@ -360,7 +365,6 @@ config ARCH_FOOTBRIDGE
 	bool "FootBridge"
 	select CPU_SA110
 	select FOOTBRIDGE
-	select NEED_MACH_IO_H if !MMU
 	select NEED_MACH_MEMORY_H
 	help
 	  Support for systems based on the DC21285 companion chip
@@ -368,11 +372,9 @@ config ARCH_FOOTBRIDGE
 
 config ARCH_IOP32X
 	bool "IOP32x-based"
-	depends on MMU
 	select CPU_XSCALE
 	select GPIO_IOP
 	select GPIOLIB
-	select NEED_RET_TO_USER
 	select FORCE_PCI
 	select PLAT_IOP
 	help
@@ -381,19 +383,15 @@ config ARCH_IOP32X
 
 config ARCH_IXP4XX
 	bool "IXP4xx-based"
-	depends on MMU
-	select ARCH_HAS_DMA_SET_COHERENT_MASK
 	select ARCH_SUPPORTS_BIG_ENDIAN
+	select ARM_PATCH_PHYS_VIRT
 	select CPU_XSCALE
-	select DMABOUNCE if PCI
-	select GENERIC_IRQ_MULTI_HANDLER
 	select GPIO_IXP4XX
 	select GPIOLIB
 	select HAVE_PCI
 	select IXP4XX_IRQ
 	select IXP4XX_TIMER
-	# With the new PCI driver this is not needed
-	select NEED_MACH_IO_H if IXP4XX_PCI_LEGACY
+	select SPARSE_IRQ
 	select USB_EHCI_BIG_ENDIAN_DESC
 	select USB_EHCI_BIG_ENDIAN_MMIO
 	help
@@ -402,7 +400,6 @@ config ARCH_IXP4XX
 config ARCH_DOVE
 	bool "Marvell Dove"
 	select CPU_PJ4
-	select GENERIC_IRQ_MULTI_HANDLER
 	select GPIOLIB
 	select HAVE_PCI
 	select MVEBU_MBUS
@@ -416,7 +413,6 @@ config ARCH_DOVE
 
 config ARCH_PXA
 	bool "PXA2xx/PXA3xx-based"
-	depends on MMU
 	select ARCH_MTD_XIP
 	select ARM_CPU_SUSPEND if PM
 	select AUTO_ZRELADDR
@@ -425,7 +421,6 @@ config ARCH_PXA
 	select CLKSRC_MMIO
 	select TIMER_OF
 	select CPU_XSCALE if !CPU_XSC3
-	select GENERIC_IRQ_MULTI_HANDLER
 	select GPIO_PXA
 	select GPIOLIB
 	select IRQ_DOMAIN
@@ -436,7 +431,6 @@ config ARCH_PXA
 
 config ARCH_RPC
 	bool "RiscPC"
-	depends on MMU
 	depends on !CC_IS_CLANG && GCC_VERSION < 90100 && GCC_VERSION >= 60000
 	select ARCH_ACORN
 	select ARCH_MAY_HAVE_PC_FDC
@@ -464,7 +458,6 @@ config ARCH_SA1100
 	select COMMON_CLK
 	select CPU_FREQ
 	select CPU_SA1100
-	select GENERIC_IRQ_MULTI_HANDLER
 	select GPIOLIB
 	select IRQ_DOMAIN
 	select ISA
@@ -479,7 +472,6 @@ config ARCH_S3C24XX
 	select CLKSRC_SAMSUNG_PWM
 	select GPIO_SAMSUNG
 	select GPIOLIB
-	select GENERIC_IRQ_MULTI_HANDLER
 	select NEED_MACH_IO_H
 	select S3C2410_WATCHDOG
 	select SAMSUNG_ATAGS
@@ -493,11 +485,9 @@ config ARCH_S3C24XX
 
 config ARCH_OMAP1
 	bool "TI OMAP1"
-	depends on MMU
 	select ARCH_OMAP
 	select CLKSRC_MMIO
 	select GENERIC_IRQ_CHIP
-	select GENERIC_IRQ_MULTI_HANDLER
 	select GPIOLIB
 	select HAVE_LEGACY_CLK
 	select IRQ_DOMAIN
@@ -573,6 +563,18 @@ config ARCH_VIRT
 	select HAVE_ARM_ARCH_TIMER
 	select ARCH_SUPPORTS_BIG_ENDIAN
 
+config ARCH_AIROHA
+	bool "Airoha SoC Support"
+	depends on ARCH_MULTI_V7
+	select ARM_AMBA
+	select ARM_GIC
+	select ARM_GIC_V3
+	select ARM_PSCI
+	select HAVE_ARM_ARCH_TIMER
+	select COMMON_CLK
+	help
+	  Support for Airoha EN7523 SoCs
+
 #
 # This is sorted alphabetically by mach-* pathname.  However, plat-*
 # Kconfigs may be included either alphabetically (according to the
@@ -1164,7 +1166,12 @@ config SMP_ON_UP
 
 config CURRENT_POINTER_IN_TPIDRURO
 	def_bool y
-	depends on SMP && CPU_32v6K && !CPU_V6
+	depends on CPU_32v6K && !CPU_V6
+
+config IRQSTACKS
+	def_bool y
+	select HAVE_IRQ_EXIT_ON_IRQ_STACK
+	select HAVE_SOFTIRQ_ON_OWN_STACK
 
 config ARM_CPU_TOPOLOGY
 	bool "Support cpu topology definition"
@@ -1508,9 +1515,6 @@ config HW_PERF_EVENTS
 	def_bool y
 	depends on ARM_PMU
 
-config ARCH_WANT_GENERAL_HUGETLB
-	def_bool y
-
 config ARM_MODULE_PLTS
 	bool "Use PLTs to allow module memory to spill over into vmalloc area"
 	depends on MODULES
@@ -1608,10 +1612,14 @@ config XEN
 	help
 	  Say Y if you want to run Linux in a Virtual Machine on Xen on ARM.
 
+config CC_HAVE_STACKPROTECTOR_TLS
+	def_bool $(cc-option,-mtp=cp15 -mstack-protector-guard=tls -mstack-protector-guard-offset=0)
+
 config STACKPROTECTOR_PER_TASK
 	bool "Use a unique stack canary value for each task"
-	depends on GCC_PLUGINS && STACKPROTECTOR && THREAD_INFO_IN_TASK && !XIP_DEFLATED_DATA
-	select GCC_PLUGIN_ARM_SSP_PER_TASK
+	depends on STACKPROTECTOR && CURRENT_POINTER_IN_TPIDRURO && !XIP_DEFLATED_DATA
+	depends on GCC_PLUGINS || CC_HAVE_STACKPROTECTOR_TLS
+	select GCC_PLUGIN_ARM_SSP_PER_TASK if !CC_HAVE_STACKPROTECTOR_TLS
 	default y
 	help
 	  Due to the fact that GCC uses an ordinary symbol reference from
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 976315dea958..0c9497d549e3 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -65,7 +65,7 @@ config UNWINDER_FRAME_POINTER
 
 config UNWINDER_ARM
 	bool "ARM EABI stack unwinder"
-	depends on AEABI && !FUNCTION_GRAPH_TRACER
+	depends on AEABI
 	select ARM_UNWIND
 	help
 	  This option enables stack unwinding support in the kernel
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 77172d555c7e..a2391b8de5a5 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -160,6 +160,7 @@ textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000
 # Machine directory name.  This list is sorted alphanumerically
 # by CONFIG_* macro name.
 machine-$(CONFIG_ARCH_ACTIONS)		+= actions
+machine-$(CONFIG_ARCH_AIROHA)		+= airoha
 machine-$(CONFIG_ARCH_ALPINE)		+= alpine
 machine-$(CONFIG_ARCH_ARTPEC)		+= artpec
 machine-$(CONFIG_ARCH_ASPEED)           += aspeed
@@ -275,6 +276,14 @@ endif
 
 ifeq ($(CONFIG_STACKPROTECTOR_PER_TASK),y)
 prepare: stack_protector_prepare
+ifeq ($(CONFIG_CC_HAVE_STACKPROTECTOR_TLS),y)
+stack_protector_prepare: prepare0
+	$(eval KBUILD_CFLAGS += \
+		-mstack-protector-guard=tls \
+		-mstack-protector-guard-offset=$(shell	\
+			awk '{if ($$2 == "TSK_STACK_CANARY") print $$3;}'\
+				include/generated/asm-offsets.h))
+else
 stack_protector_prepare: prepare0
 	$(eval SSP_PLUGIN_CFLAGS := \
 		-fplugin-arg-arm_ssp_per_task_plugin-offset=$(shell	\
@@ -283,6 +292,7 @@ stack_protector_prepare: prepare0
 	$(eval KBUILD_CFLAGS += $(SSP_PLUGIN_CFLAGS))
 	$(eval GCC_PLUGINS_CFLAGS += $(SSP_PLUGIN_CFLAGS))
 endif
+endif
 
 all:	$(notdir $(KBUILD_IMAGE))
 
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 954eee8a785a..187a187706cb 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -92,17 +92,13 @@ ifeq ($(CONFIG_USE_OF),y)
 OBJS	+= $(libfdt_objs) fdt_check_mem_start.o
 endif
 
-# -fstack-protector-strong triggers protection checks in this code,
-# but it is being used too early to link to meaningful stack_chk logic.
-$(foreach o, $(libfdt_objs) atags_to_fdt.o fdt_check_mem_start.o, \
-	$(eval CFLAGS_$(o) := -I $(srctree)/scripts/dtc/libfdt -fno-stack-protector))
-
 targets       := vmlinux vmlinux.lds piggy_data piggy.o \
 		 head.o $(OBJS)
 
 KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING
 
 ccflags-y := -fpic $(call cc-option,-mno-single-pic-base,) -fno-builtin \
+	     -I$(srctree)/scripts/dtc/libfdt -fno-stack-protector \
 	     -I$(obj) $(DISABLE_ARM_SSP_PER_TASK_PLUGIN)
 ccflags-remove-$(CONFIG_FUNCTION_TRACER) += -pg
 asflags-y := -DZIMAGE
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index e1e9a5dde853..c3c66ff2d696 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -128,13 +128,6 @@ asmlinkage void __div0(void)
 	error("Attempting division by 0!");
 }
 
-const unsigned long __stack_chk_guard = 0x000a0dff;
-
-void __stack_chk_fail(void)
-{
-	error("stack-protector: Kernel stack is corrupted\n");
-}
-
 extern int do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x));
 
 
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 235ad559acb2..7c16f8a2b738 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -93,6 +93,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
 	bcm2837-rpi-3-b.dtb \
 	bcm2837-rpi-3-b-plus.dtb \
 	bcm2837-rpi-cm3-io3.dtb \
+	bcm2837-rpi-zero-2-w.dtb \
 	bcm2711-rpi-400.dtb \
 	bcm2711-rpi-4-b.dtb \
 	bcm2711-rpi-cm4-io.dtb \
@@ -187,6 +188,8 @@ dtb-$(CONFIG_ARCH_DAVINCI) += \
 	da850-lego-ev3.dtb
 dtb-$(CONFIG_ARCH_DIGICOLOR) += \
 	cx92755_equinox.dtb
+dtb-$(CONFIG_ARCH_AIROHA) += \
+	en7523-evb.dtb
 dtb-$(CONFIG_ARCH_EXYNOS3) += \
 	exynos3250-artik5-eval.dtb \
 	exynos3250-monk.dtb \
@@ -221,6 +224,8 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \
 	exynos5420-arndale-octa.dtb \
 	exynos5420-peach-pit.dtb \
 	exynos5420-smdk5420.dtb \
+	exynos5420-chagall-wifi.dtb \
+	exynos5420-klimt-wifi.dtb \
 	exynos5422-odroidhc1.dtb \
 	exynos5422-odroidxu3.dtb \
 	exynos5422-odroidxu3-lite.dtb \
@@ -269,7 +274,7 @@ dtb-$(CONFIG_ARCH_IXP4XX) += \
 	intel-ixp42x-dlink-dsm-g600.dtb \
 	intel-ixp42x-gateworks-gw2348.dtb \
 	intel-ixp43x-gateworks-gw2358.dtb \
-	intel-ixp42x-netgear-wg302v2.dtb \
+	intel-ixp42x-netgear-wg302v1.dtb \
 	intel-ixp42x-arcom-vulcan.dtb \
 	intel-ixp42x-gateway-7001.dtb
 dtb-$(CONFIG_ARCH_KEYSTONE) += \
@@ -281,6 +286,7 @@ dtb-$(CONFIG_ARCH_KEYSTONE) += \
 dtb-$(CONFIG_MACH_KIRKWOOD) += \
 	kirkwood-b3.dtb \
 	kirkwood-blackarmor-nas220.dtb \
+	kirkwood-c200-v1.dtb \
 	kirkwood-cloudbox.dtb \
 	kirkwood-d2net.dtb \
 	kirkwood-db-88f6281.dtb \
@@ -735,6 +741,8 @@ dtb-$(CONFIG_SOC_IMX7D) += \
 dtb-$(CONFIG_SOC_IMX7ULP) += \
 	imx7ulp-com.dtb \
 	imx7ulp-evk.dtb
+dtb-$(CONFIG_SOC_LAN966) += \
+	lan966x-pcb8291.dtb
 dtb-$(CONFIG_SOC_LS1021A) += \
 	ls1021a-moxa-uc-8410a.dtb \
 	ls1021a-qds.dtb \
@@ -806,6 +814,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += \
 	logicpd-som-lv-37xx-devkit.dtb \
 	omap3430-sdp.dtb \
 	omap3-beagle.dtb \
+	omap3-beagle-ab4.dtb \
 	omap3-beagle-xm.dtb \
 	omap3-beagle-xm-ab.dtb \
 	omap3-cm-t3517.dtb \
@@ -894,6 +903,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \
 	am335x-regor-rdk.dtb \
 	am335x-sancloud-bbe.dtb \
 	am335x-sancloud-bbe-lite.dtb \
+	am335x-sancloud-bbe-extended-wifi.dtb \
 	am335x-shc.dtb \
 	am335x-sbc-t335.dtb \
 	am335x-sl50.dtb \
@@ -1161,6 +1171,7 @@ dtb-$(CONFIG_ARCH_STM32) += \
 	stm32mp157c-dhcom-picoitx.dtb \
 	stm32mp157c-dk2.dtb \
 	stm32mp157c-ed1.dtb \
+	stm32mp157c-emsbc-argon.dtb \
 	stm32mp157c-ev1.dtb \
 	stm32mp157c-lxa-mc1.dtb \
 	stm32mp157c-odyssey.dtb
@@ -1228,6 +1239,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
 	sun7i-a20-bananapro.dtb \
 	sun7i-a20-cubieboard2.dtb \
 	sun7i-a20-cubietruck.dtb \
+	sun7i-a20-haoyu-marsboard.dtb \
 	sun7i-a20-hummingbird.dtb \
 	sun7i-a20-itead-ibox.dtb \
 	sun7i-a20-i12-tvbox.dtb \
@@ -1415,6 +1427,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \
 	zynq-zybo.dtb \
 	zynq-zybo-z7.dtb
 dtb-$(CONFIG_MACH_ARMADA_370) += \
+	armada-370-c200-v2.dtb \
 	armada-370-db.dtb \
 	armada-370-dlink-dns327l.dtb \
 	armada-370-mirabox.dtb \
@@ -1492,6 +1505,9 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
 dtb-$(CONFIG_ARCH_MILBEAUT) += milbeaut-m10v-evb.dtb
 dtb-$(CONFIG_ARCH_MSTARV7) += \
 	mstar-infinity-msc313-breadbee_crust.dtb \
+	mstar-infinity2m-ssd202d-100ask-dongshanpione.dtb \
+	mstar-infinity2m-ssd202d-miyoo-mini.dtb \
+	mstar-infinity2m-ssd202d-wirelesstag-ido-sbc2d06-v1b-22w.dtb \
 	mstar-infinity2m-ssd202d-ssd201htv2.dtb \
 	mstar-infinity2m-ssd202d-unitv2.dtb \
 	mstar-infinity3-msc313e-breadbee.dtb \
@@ -1505,6 +1521,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-bmc-arm-centriq2400-rep.dtb \
 	aspeed-bmc-arm-stardragon4800-rep2.dtb \
 	aspeed-bmc-asrock-e3c246d4i.dtb \
+	aspeed-bmc-asrock-romed8hm3.dtb \
 	aspeed-bmc-bytedance-g220a.dtb \
 	aspeed-bmc-facebook-bletchley.dtb \
 	aspeed-bmc-facebook-cloudripper.dtb \
@@ -1542,6 +1559,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-bmc-opp-zaius.dtb \
 	aspeed-bmc-portwell-neptune.dtb \
 	aspeed-bmc-quanta-q71l.dtb \
+	aspeed-bmc-quanta-s6q.dtb \
 	aspeed-bmc-supermicro-x11spi.dtb \
 	aspeed-bmc-inventec-transformers.dtb \
 	aspeed-bmc-tyan-s7106.dtb \
diff --git a/arch/arm/boot/dts/am335x-pdu001.dts b/arch/arm/boot/dts/am335x-pdu001.dts
index b793beeab245..ce6cc2b96654 100644
--- a/arch/arm/boot/dts/am335x-pdu001.dts
+++ b/arch/arm/boot/dts/am335x-pdu001.dts
@@ -353,7 +353,7 @@
 		};
 	};
 
-	mcp79400: mcp79400@6f {
+	mcp79400: rtc@6f {
 		compatible = "microchip,mcp7940x";
 		reg = <0x6f>;
 	};
diff --git a/arch/arm/boot/dts/am335x-sancloud-bbe-extended-wifi.dts b/arch/arm/boot/dts/am335x-sancloud-bbe-extended-wifi.dts
new file mode 100644
index 000000000000..246a1a9b3e44
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-sancloud-bbe-extended-wifi.dts
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2021 Sancloud Ltd
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-bone-common.dtsi"
+#include "am335x-boneblack-common.dtsi"
+#include "am335x-sancloud-bbe-common.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "SanCloud BeagleBone Enhanced Extended WiFi";
+	compatible = "sancloud,am335x-boneenhanced",
+		     "ti,am335x-bone-black",
+		     "ti,am335x-bone",
+		     "ti,am33xx";
+
+	wlan_en_reg: fixedregulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us= <100000>;
+	};
+};
+
+&am33xx_pinmux {
+	mmc3_pins: pinmux_mmc3_pins {
+		pinctrl-single,pins = <
+			/* gpmc_a9.gpio1_25: RADIO_EN */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_OUTPUT_PULLUP, MUX_MODE7)
+
+			/* gpmc_ad12.mmc2_dat0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE3)
+
+			/* gpmc_ad13.mmc2_dat1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE3)
+
+			/* gpmc_ad14.mmc2_dat2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE3)
+
+			/* gpmc_ad15.mmc2_dat3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE3)
+
+			/* gpmc_csn3.mmc2_cmd */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT_PULLUP, MUX_MODE3)
+
+			/* gpmc_clk.mmc2_clk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE3)
+		>;
+	};
+
+	bluetooth_pins: pinmux_bluetooth_pins {
+		pinctrl-single,pins = <
+			/* event_intr0.gpio0_19 */
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_INPUT_PULLUP, MUX_MODE7)
+		>;
+	};
+
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			/* uart1_rxd */
+			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)
+
+			/* uart1_txd */
+			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0)
+
+			/* uart1_ctsn */
+			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)
+
+			/* uart1_rtsn */
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+};
+
+&i2c2 {
+	status = "disabled";
+};
+
+&mmc3 {
+	status = "okay";
+	vmmc-supply = <&wlan_en_reg>;
+	bus-width = <4>;
+	non-removable;
+	cap-power-off-card;
+	ti,needs-special-hs-handling;
+	keep-power-in-suspend;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins>;
+	dmas = <&edma_xbar 12 0 1
+		&edma_xbar 13 0 2>;
+	dma-names = "tx", "rx";
+	clock-frequency = <50000000>;
+	max-frequency = <50000000>;
+};
+
+&uart1 {
+	status = "okay";
+
+	bluetooth {
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart1_pins &bluetooth_pins>;
+		compatible = "qcom,qca6174-bt";
+		enable-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
+		clocks = <&l4ls_clkctrl AM3_L4LS_UART2_CLKCTRL 0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <19 IRQ_TYPE_EDGE_RISING>;
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/am335x-wega.dtsi
index 673159d93a6a..f957fea8208e 100644
--- a/arch/arm/boot/dts/am335x-wega.dtsi
+++ b/arch/arm/boot/dts/am335x-wega.dtsi
@@ -55,7 +55,7 @@
 		2 1 0 0 /* # 0: INACTIVE, 1: TX, 2: RX */
 	>;
 	tx-num-evt = <16>;
-	rt-num-evt = <16>;
+	rx-num-evt = <16>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index 2f4d2e4e9b3e..4f9a7251a107 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -11,7 +11,7 @@
 #include <dt-bindings/pinctrl/am43xx.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pwm/pwm.h>
-#include <dt-bindings/sound/tlv320aic31xx-micbias.h>
+#include <dt-bindings/sound/tlv320aic31xx.h>
 
 / {
 	model = "TI AM43x EPOS EVM";
diff --git a/arch/arm/boot/dts/armada-370-c200-v2.dts b/arch/arm/boot/dts/armada-370-c200-v2.dts
new file mode 100644
index 000000000000..1a4a09bdde63
--- /dev/null
+++ b/arch/arm/boot/dts/armada-370-c200-v2.dts
@@ -0,0 +1,388 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Device Tree file for Ctera C200-V2
+ *
+ * Copyright (C) 2022 Pawel Dembicki <paweldembicki@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "armada-370.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Ctera C200 V2";
+	compatible = "ctera,c200-v2", "marvell,armada370", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>; /* 1024 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
+	};
+
+	thermal-zones {
+		ethphy-thermal {
+			polling-delay = <20000>;
+			polling-delay-passive = <2000>;
+
+			thermal-sensors = <&ethphy0>;
+
+			trips {
+				ethphy_alert1: trip1 {
+					temperature = <65000>;
+					hysteresis = <4000>;
+					type = "passive";
+				};
+
+				ethphy_crit: trip2 {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	beeper {
+		compatible = "pwm-beeper";
+		pinctrl-0 = <&pmx_beeper>;
+		pinctrl-names = "default";
+		pwms = <&gpio1 31 4000>;
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&pmx_poweroff>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_buttons>;
+		pinctrl-names = "default";
+
+		power {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		reset {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+		};
+
+		usb1 {
+			label = "USB1 Button";
+			linux,code = <BTN_0>;
+			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+		};
+
+		usb2 {
+			label = "USB2 Button";
+			linux,code = <BTN_1>;
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_leds1 &pmx_leds2>;
+		pinctrl-names = "default";
+
+		led-0 {
+			function = LED_FUNCTION_USB;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			function = LED_FUNCTION_USB;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led-2 {
+			function = LED_FUNCTION_USB;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+		};
+
+		led-3 {
+			function = LED_FUNCTION_USB;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+		};
+
+		led-4 {
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5 {
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
+		};
+
+		led-6 {
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+		};
+
+		led-7 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-8 {
+			function = LED_FUNCTION_DISK_ERR;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+		};
+
+		led-9 {
+			function = LED_FUNCTION_DISK_ERR;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+		};
+
+		led-10 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
+		};
+
+		led-11 {
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+		};
+
+		led-12 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&coherencyfab {
+	broken-idle;
+};
+
+&eth1 {
+	pinctrl-0 = <&ge1_rgmii_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	phy-handle = <&ethphy0>;
+	phy-connection-type = "rgmii-id";
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+	clock-frequency = <100000>;
+	status = "okay";
+
+	hwmon@2a {
+		compatible = "nuvoton,nct7802";
+		reg = <0x2a>;
+	};
+
+	rtc@30 {
+		compatible = "sii,s35390a";
+		reg = <0x30>;
+	};
+};
+
+&mdio {
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+
+	ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */
+		reg = <0>;
+		#thermal-sensor-cells = <0>;
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "uboot";
+				reg = <0x0000000 0x200000>;
+				read-only;
+			};
+
+			partition@200000 {
+				label = "certificate";
+				reg = <0x0200000 0x100000>;
+				read-only;
+			};
+
+			partition@300000 {
+				label = "preset_cfg";
+				reg = <0x0300000 0x100000>;
+				read-only;
+			};
+
+			partition@400000 {
+				label = "dev_params";
+				reg = <0x0400000 0x100000>;
+				read-only;
+			};
+			partition@500000 {
+				label = "active_bank";
+				reg = <0x0500000 0x0100000>;
+			};
+
+			partition@600000 {
+				label = "magic";
+				reg = <0x0600000 0x0100000>;
+				read-only;
+			};
+
+			partition@700000 {
+				label = "bank1";
+				reg = <0x0700000 0x2800000>;
+			};
+
+			partition@2f00000 {
+				label = "bank2";
+				reg = <0x2f00000 0x2800000>;
+			};
+
+			/* 0x5700000-0x5a00000 undefined in vendor firmware */
+
+			partition@5a00000 {
+				label = "reserved";
+				reg = <0x5a00000 0x2000000>;
+			};
+
+			partition@7a00000 {
+				label = "rootfs";
+				reg = <0x7a00000 0x8600000>;
+			};
+		};
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	pcie@1,0 { /* Renesas uPD720202 USB 3.0 controller */
+		pinctrl-0 = <&pmx_pcie>;
+		pinctrl-names = "default";
+		status = "okay";
+		reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pinctrl {
+	pmx_poweroff: pmx-poweroff {
+		marvell,pins = "mpp7";
+		marvell,function = "gpo";
+	};
+
+	pmx_power_cpu: pmx-power-cpu {
+		marvell,pins = "mpp4";
+		marvell,function = "vdd";
+	};
+
+	pmx_buttons: pmx-buttons {
+		marvell,pins = "mpp6", "mpp10", "mpp14", "mpp32";
+		marvell,function = "gpio";
+	};
+
+	pmx_leds1: pmx-leds1 {
+		marvell,pins = "mpp47";
+		marvell,function = "gpo";
+	};
+
+	pmx_leds2: pmx-leds2 {
+		marvell,pins = "mpp12", "mpp13", "mpp15", "mpp16", "mpp50", "mpp51",
+			       "mpp52", "mpp53", "mpp55", "mpp56", "mpp57", "mpp58";
+		marvell,function = "gpio";
+	};
+
+	pmx_pcie: pmx-pcie {
+		marvell,pins = "mpp59";
+		marvell,function = "gpio";
+	};
+
+	pmx_beeper: pmx-beeper {
+		marvell,pins = "mpp63";
+		marvell,function = "gpio";
+	};
+};
+
+&pmsu {
+	pinctrl-0 = <&pmx_power_cpu>;
+	pinctrl-names = "default";
+};
+
+&rtc {
+	status = "disabled";
+};
+
+&sata {
+	nr-ports = <2>;
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	hdd0_temp: sata-port@0 {
+		reg = <0>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	hdd1_temp: sata-port@1 {
+		reg = <1>;
+		#thermal-sensor-cells = <0>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/armada-385-turris-omnia.dts b/arch/arm/boot/dts/armada-385-turris-omnia.dts
index 5bd6a66d2c2b..f240018148f6 100644
--- a/arch/arm/boot/dts/armada-385-turris-omnia.dts
+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
@@ -71,16 +71,19 @@
 			pcie@1,0 {
 				/* Port 0, Lane 0 */
 				status = "okay";
+				slot-power-limit-milliwatt = <10000>;
 			};
 
 			pcie@2,0 {
 				/* Port 1, Lane 0 */
 				status = "okay";
+				slot-power-limit-milliwatt = <10000>;
 			};
 
 			pcie@3,0 {
 				/* Port 2, Lane 0 */
 				status = "okay";
+				slot-power-limit-milliwatt = <10000>;
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/armada-385.dtsi b/arch/arm/boot/dts/armada-385.dtsi
index f0022d10c715..83392b92dae2 100644
--- a/arch/arm/boot/dts/armada-385.dtsi
+++ b/arch/arm/boot/dts/armada-385.dtsi
@@ -69,16 +69,25 @@
 				reg = <0x0800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 8>;
 				status = "disabled";
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			/* x1 port */
@@ -88,16 +97,25 @@
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
+						<0 0 0 2 &pcie2_intc 1>,
+						<0 0 0 3 &pcie2_intc 2>,
+						<0 0 0 4 &pcie2_intc 3>;
 				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 5>;
 				status = "disabled";
+				pcie2_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			/* x1 port */
@@ -107,16 +125,25 @@
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
 					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie3_intc 0>,
+						<0 0 0 2 &pcie3_intc 1>,
+						<0 0 0 3 &pcie3_intc 2>,
+						<0 0 0 4 &pcie3_intc 3>;
 				marvell,pcie-port = <2>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 6>;
 				status = "disabled";
+				pcie3_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			/*
@@ -129,16 +156,25 @@
 				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
 					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
 				bus-range = <0x00 0xff>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie4_intc 0>,
+						<0 0 0 2 &pcie4_intc 1>,
+						<0 0 0 3 &pcie4_intc 2>,
+						<0 0 0 4 &pcie4_intc 3>;
 				marvell,pcie-port = <3>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 7>;
 				status = "disabled";
+				pcie4_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
index 4c3c3f1a12ea..1b2e7ad37566 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
@@ -339,17 +339,8 @@
 			<&adc10mux 0>, <&adc10mux 1>,
 			<&adc11mux 0>, <&adc11mux 1>,
 			<&adc12mux 0>, <&adc12mux 1>,
-			<&adc13mux 0>, <&adc13mux 1>;
-	};
-
-	iio-hwmon-adc14 {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 14>;
-	};
-
-	iio-hwmon-battery {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 15>;
+			<&adc13mux 0>, <&adc13mux 1>,
+			<&adc 14>, <&adc 15>;
 	};
 };
 
@@ -362,6 +353,13 @@
 		/* spi-max-frequency = <50000000>; */
 #include "openbmc-flash-layout-64.dtsi"
 	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+#include "openbmc-flash-layout-64-alt.dtsi"
+	};
 };
 
 &spi1 {
@@ -853,7 +851,7 @@
 	/*E0-E7*/	"","","","","","","","",
 	/*F0-F7*/	"","","BMC_SYS_PSON_L","S0_DDR_SAVE","PGOOD",
 			"S1_DDR_SAVE","","",
-	/*G0-G7*/	"S0_FW_BOOT_OK","SHD_REQ_L","","S0_OVERTEMP_L","","",
+	/*G0-G7*/	"host0-ready","SHD_REQ_L","","S0_OVERTEMP_L","","",
 			"","",
 	/*H0-H7*/	"","","","","PSU1_VIN_GOOD","PSU2_VIN_GOOD","","",
 	/*I0-I7*/	"PSU1_PRESENT","PSU2_PRESENT","S1_BMC_SPECIAL_BOOT",
@@ -869,7 +867,7 @@
 	/*Q0-Q7*/	"","","","","","UID_BUTTON","","",
 	/*R0-R7*/	"","","BMC_EXT_HIGHTEMP_L","OCP_AUX_PWREN",
 			"OCP_MAIN_PWREN","RESET_BUTTON","","",
-	/*S0-S7*/	"","","","","RTC_BAT_SEN_EN","","","",
+	/*S0-S7*/	"","","","","rtc-battery-voltage-read-enable","","","",
 	/*T0-T7*/	"","","","","","","","",
 	/*U0-U7*/	"","","","","","","","",
 	/*V0-V7*/	"","","","","","","","",
@@ -884,7 +882,7 @@
 	/*AC0-AC7*/	"SYS_PWR_GD","","","","","BMC_READY","SLAVE_PRESENT_L",
 			"BMC_OCP_PG";
 
-	i2c4_o_en {
+	i2c4-o-en-hog {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(Y, 2) GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts b/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts
new file mode 100644
index 000000000000..e71ccfd1df63
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts
@@ -0,0 +1,259 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/{
+	model = "ASRock ROMED8HM3 BMC v1.00";
+	compatible = "asrock,romed8hm3-bmc", "aspeed,ast2500";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=tty0 console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+
+		system-fault {
+			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
+			panic-indicator;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <100000000>; /* 100 MHz */
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+	aspeed,lpc-io-reg = <0x2f8>;
+	aspeed,lpc-interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	/* inlet temp sensor */
+	w83773g@4c {
+		compatible = "nuvoton,w83773g";
+		reg = <0x4c>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* IPB temp sensor */
+	w83773g@4c {
+		compatible = "nuvoton,w83773g";
+		reg = <0x4c>;
+	};
+
+	/* IPB PMIC */
+	lm25066@40 {
+		compatible = "lm25066";
+		reg = <0x40>;
+	};
+
+	/* 12VSB PMIC */
+	lm25066@41 {
+		compatible = "lm25066";
+		reg = <0x41>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+
+	/* Baseboard FRU eeprom */
+	eeprom@50 {
+		compatible = "st,24c128", "atmel,24c128";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3_default
+		&pinctrl_pwm4_default
+		&pinctrl_pwm5_default
+		&pinctrl_pwm6_default>;
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03 0x0b>;
+	};
+
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x0c>;
+	};
+
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05 0x0d>;
+	};
+
+	fan@6 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06 0x0e>;
+	};
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+		/*  A */ "LOCATORLED_STATUS_N", "BMC_MAC2_INTB", "NMI_BTN_N", "BMC_NMI",
+			"", "", "", "",
+		/*  B */ "DDR_MEM_TEMP", "", "", "", "", "", "", "",
+		/*  C */ "", "", "", "", "PCIE_HP_SEL_N", "PCIE_SATA_SEL_N", "LOCATORBTN", "",
+		/*  D */ "BMC_PSIN", "BMC_PSOUT", "BMC_RESETCON", "RESETCON",
+			"", "", "", "PSU_FAN_FAIL_N",
+		/*  E */ "", "", "", "", "", "", "", "",
+		/*  F */ "NIC_PWR_GOOD", "PRSNTB0", "PRSNTB1", "PRSNTB2",
+			"PRSNTB3", "", "3VSB_PCIE1_PG", "12V_PCIE1_PG",
+		/*  G */ "HWM_BAT_EN", "CHASSIS_ID0", "CHASSIS_ID1", "CHASSIS_ID2",
+			"BMC_ALERT1_N_R", "BMC_ALERT2_N_R", "BMC_ALERT3_N", "BMC_ALERT4_N",
+		/*  H */ "X24_C1_PRSNT", "X24_C2_PRSNT", "X24_C3_PRSNT", "FM_MEM_THERM_EVENT_BMC_R_N",
+			"FACMODE", "BMC_RTCRST", "BMC_HB_LED_N", "BMC_CASEOPEN",
+		/*  I */ "", "", "", "", "", "", "", "",
+		/*  J */ "BMC_READY", "BMC_PCH_BIOS_CS_N", "", "P0_MA_DDR_QS_CS_N",
+			"", "", "", "",
+		/*  K */ "", "", "", "", "", "", "", "",
+		/*  L */ "", "", "", "", "", "", "", "",
+		/*  M */ "", "", "MEZZ_PWRBRK_N", "OCP_HP_RST_EN",
+			"MAIN_PWR_EN_G", "BMC_MAIN_EN", "AUX_PWR_EN_G", "BMC_AUX_EN",
+		/*  N */ "", "", "", "", "", "", "", "",
+		/*  O */ "", "", "", "", "", "", "", "",
+		/*  P */ "", "", "", "", "", "", "", "",
+		/*  Q */ "", "", "", "",
+			"BMC_SMB_PRESENT_1_N", "BMC_SMB_PRESENT_2_N",
+			"BMC_SMB_PRESENT_3_N", "BMC_PCIE_WAKE_N",
+		/*  R */ "", "", "THERMALTRIP_CLEAR_N", "", "", "", "", "",
+		/*  S */ "", "", "", "", "", "", "", "",
+		/*  T */ "", "", "", "", "", "", "", "",
+		/*  U */ "", "", "", "", "", "", "", "",
+		/*  V */ "", "", "", "", "", "", "", "",
+		/*  W */ "", "", "", "", "", "", "", "",
+		/*  X */ "", "", "", "", "", "", "", "",
+		/*  Y */ "SLP_S3", "SLP_S4_S5", "NODE_ID_1", "NODE_ID_2", "", "", "", "",
+		/*  Z */ "", "", "SYSTEM_FAULT_LED_N", "FAST_THROTTLE_N",
+			"", "", "", "",
+		/* AA */ "FM_CPU0_IBMC_THERMTRIP_N", "", "PROCHOT_L_G", "",
+			"", "", "", "",
+		/* AB */ "BMC_FORCE_SELFREFRESH", "PWRGD_OUT", "", "IRQ_BMC_PCH_SMI_LPC_N",
+			"", "", "", "",
+		/* AC */ "", "", "", "", "", "", "", "";
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+		&pinctrl_adc1_default
+		&pinctrl_adc2_default
+		&pinctrl_adc3_default
+		&pinctrl_adc4_default
+		&pinctrl_adc5_default
+		&pinctrl_adc6_default
+		&pinctrl_adc7_default
+		&pinctrl_adc8_default
+		&pinctrl_adc9_default
+		&pinctrl_adc10_default
+		&pinctrl_adc11_default
+		&pinctrl_adc12_default
+		&pinctrl_adc13_default
+		&pinctrl_adc14_default
+		&pinctrl_adc15_default>;
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts
index f973ea883b97..eaf1bc261ee3 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts
@@ -5,6 +5,8 @@
 #include "aspeed-g6.dtsi"
 #include <dt-bindings/gpio/aspeed-gpio.h>
 #include <dt-bindings/usb/pd.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	model = "Facebook Bletchley BMC";
@@ -31,7 +33,7 @@
 			<&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
 	};
 
-	spi_gpio: spi-gpio {
+	spi1_gpio: spi1-gpio {
 		compatible = "spi-gpio";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -49,119 +51,165 @@
 		};
 	};
 
+	spi2_gpio: spi2-gpio {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-sck = <&gpio0 ASPEED_GPIO(X, 3) GPIO_ACTIVE_HIGH>;
+		gpio-mosi = <&gpio0 ASPEED_GPIO(X, 4) GPIO_ACTIVE_HIGH>;
+		gpio-miso = <&gpio0 ASPEED_GPIO(X, 5) GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>;
+
+		flash@0 {
+			reg = <0>;
+			compatible = "jedec,spi-nor";
+			m25p,fast-read;
+			label = "pnor";
+			spi-max-frequency = <100000000>;
+		};
+	};
+
 	switchphy: ethernet-phy@0 {
 		// Fixed link
 	};
 
-	leds {
+	front_gpio_leds {
 		compatible = "gpio-leds";
-
 		sys_log_id {
-			retain-state-shutdown;
-			default-state = "keep";
+			default-state = "off";
 			gpios = <&front_leds 0 GPIO_ACTIVE_HIGH>;
 		};
+	};
+
+	fan_gpio_leds {
+		compatible = "gpio-leds";
 		fan0_blue {
 			retain-state-shutdown;
 			default-state = "on";
-			gpios = <&fan_ioexp 8 GPIO_ACTIVE_HIGH>;
+			gpios = <&fan_leds 8 GPIO_ACTIVE_HIGH>;
 		};
 		fan1_blue {
 			retain-state-shutdown;
 			default-state = "on";
-			gpios = <&fan_ioexp 9 GPIO_ACTIVE_HIGH>;
+			gpios = <&fan_leds 9 GPIO_ACTIVE_HIGH>;
 		};
 		fan2_blue {
 			retain-state-shutdown;
 			default-state = "on";
-			gpios = <&fan_ioexp 10 GPIO_ACTIVE_HIGH>;
+			gpios = <&fan_leds 10 GPIO_ACTIVE_HIGH>;
 		};
 		fan3_blue {
 			retain-state-shutdown;
 			default-state = "on";
-			gpios = <&fan_ioexp 11 GPIO_ACTIVE_HIGH>;
+			gpios = <&fan_leds 11 GPIO_ACTIVE_HIGH>;
 		};
 		fan0_amber {
 			retain-state-shutdown;
 			default-state = "off";
-			gpios = <&fan_ioexp 12 GPIO_ACTIVE_HIGH>;
+			gpios = <&fan_leds 12 GPIO_ACTIVE_HIGH>;
 		};
 		fan1_amber {
 			retain-state-shutdown;
 			default-state = "off";
-			gpios = <&fan_ioexp 13 GPIO_ACTIVE_HIGH>;
+			gpios = <&fan_leds 13 GPIO_ACTIVE_HIGH>;
 		};
 		fan2_amber {
 			retain-state-shutdown;
 			default-state = "off";
-			gpios = <&fan_ioexp 14 GPIO_ACTIVE_HIGH>;
+			gpios = <&fan_leds 14 GPIO_ACTIVE_HIGH>;
 		};
 		fan3_amber {
 			retain-state-shutdown;
 			default-state = "off";
-			gpios = <&fan_ioexp 15 GPIO_ACTIVE_HIGH>;
-		};
-		sled0_amber {
-			retain-state-shutdown;
-			default-state = "off";
-			gpios = <&sled0_leds 0 GPIO_ACTIVE_LOW>;
-		};
-		sled0_blue {
-			retain-state-shutdown;
-			default-state = "off";
-			gpios = <&sled0_leds 1 GPIO_ACTIVE_LOW>;
+			gpios = <&fan_leds 15 GPIO_ACTIVE_HIGH>;
 		};
+	};
+
+	sled1_gpio_leds {
+		compatible = "gpio-leds";
 		sled1_amber {
 			retain-state-shutdown;
-			default-state = "off";
+			default-state = "keep";
 			gpios = <&sled1_leds 0 GPIO_ACTIVE_LOW>;
 		};
 		sled1_blue {
 			retain-state-shutdown;
-			default-state = "off";
+			default-state = "keep";
 			gpios = <&sled1_leds 1 GPIO_ACTIVE_LOW>;
 		};
+	};
+
+	sled2_gpio_leds {
+		compatible = "gpio-leds";
 		sled2_amber {
 			retain-state-shutdown;
-			default-state = "off";
+			default-state = "keep";
 			gpios = <&sled2_leds 0 GPIO_ACTIVE_LOW>;
 		};
 		sled2_blue {
 			retain-state-shutdown;
-			default-state = "off";
+			default-state = "keep";
 			gpios = <&sled2_leds 1 GPIO_ACTIVE_LOW>;
 		};
+	};
+
+	sled3_gpio_leds {
+		compatible = "gpio-leds";
 		sled3_amber {
 			retain-state-shutdown;
-			default-state = "off";
+			default-state = "keep";
 			gpios = <&sled3_leds 0 GPIO_ACTIVE_LOW>;
 		};
 		sled3_blue {
 			retain-state-shutdown;
-			default-state = "off";
+			default-state = "keep";
 			gpios = <&sled3_leds 1 GPIO_ACTIVE_LOW>;
 		};
+	};
+
+	sled4_gpio_leds {
+		compatible = "gpio-leds";
 		sled4_amber {
 			retain-state-shutdown;
-			default-state = "off";
+			default-state = "keep";
 			gpios = <&sled4_leds 0 GPIO_ACTIVE_LOW>;
 		};
 		sled4_blue {
 			retain-state-shutdown;
-			default-state = "off";
+			default-state = "keep";
 			gpios = <&sled4_leds 1 GPIO_ACTIVE_LOW>;
 		};
+	};
+
+	sled5_gpio_leds {
+		compatible = "gpio-leds";
 		sled5_amber {
 			retain-state-shutdown;
-			default-state = "off";
+			default-state = "keep";
 			gpios = <&sled5_leds 0 GPIO_ACTIVE_LOW>;
 		};
 		sled5_blue {
 			retain-state-shutdown;
-			default-state = "off";
+			default-state = "keep";
 			gpios = <&sled5_leds 1 GPIO_ACTIVE_LOW>;
 		};
 	};
+
+	sled6_gpio_leds {
+		compatible = "gpio-leds";
+		sled6_amber {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled6_leds 0 GPIO_ACTIVE_LOW>;
+		};
+		sled6_blue {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled6_leds 1 GPIO_ACTIVE_LOW>;
+		};
+	};
 };
 
 &mac2 {
@@ -177,10 +225,6 @@
 	};
 };
 
-&rtc {
-	status = "okay";
-};
-
 &fmc {
 	status = "okay";
 	flash@0 {
@@ -190,24 +234,21 @@
 		spi-max-frequency = <50000000>;
 #include "openbmc-flash-layout-128.dtsi"
 	};
-};
-
-&spi2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi2_default>;
-
-	flash@0 {
+	flash@1 {
 		status = "okay";
 		m25p,fast-read;
-		label = "pnor";
-		spi-max-frequency = <100000000>;
+		label = "flash1";
+		spi-max-frequency = <50000000>;
 	};
 };
 
 &i2c0 {
 	status = "okay";
-	/* TODO: Add ADC INA230 */
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
 
 	mp5023@40 {
 		compatible = "mps,mp5023";
@@ -219,7 +260,7 @@
 		reg = <0x4f>;
 	};
 
-	sled0_ioexp: pca9539@76 {
+	sled1_ioexp: pca9539@76 {
 		compatible = "nxp,pca9539";
 		reg = <0x76>;
 		#address-cells = <1>;
@@ -227,14 +268,17 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(M, 0) IRQ_TYPE_LEVEL_LOW>;
+
 		gpio-line-names =
-		"SLED0_MS_DETECT1","SLED0_VBUS_BMC_EN","SLED0_INA230_ALERT","SLED0_P12V_STBY_ALERT",
-		"SLED0_SSD_ALERT","SLED0_MS_DETECT0","SLED0_RST_CCG5","SLED0_FUSB302_INT",
-		"SLED0_MD_STBY_RESET","SLED0_MD_IOEXP_EN_FAULT","SLED0_MD_DIR","SLED0_MD_DECAY",
-		"SLED0_MD_MODE1","SLED0_MD_MODE2","SLED0_MD_MODE3","power-host0";
+		"SLED1_MS_DETECT1","SLED1_VBUS_BMC_EN","SLED1_INA230_ALERT","SLED1_P12V_STBY_ALERT",
+		"SLED1_SSD_ALERT","SLED1_MS_DETECT0","SLED1_RST_CCG5","SLED1_FUSB302_INT",
+		"SLED1_MD_STBY_RESET","SLED1_MD_IOEXP_EN_FAULT","SLED1_MD_DIR","SLED1_MD_DECAY",
+		"SLED1_MD_MODE1","SLED1_MD_MODE2","SLED1_MD_MODE3","power-host1";
 	};
 
-	sled0_leds: pca9552@67 {
+	sled1_leds: pca9552@67 {
 		compatible = "nxp,pca9552";
 		reg = <0x67>;
 		#address-cells = <1>;
@@ -243,13 +287,13 @@
 		#gpio-cells = <2>;
 
 		gpio-line-names =
-		"led-sled0-amber","led-sled0-blue","SLED0_RST_IOEXP","",
+		"led-sled1-amber","led-sled1-blue","SLED1_RST_IOEXP","SLED1_MD_REF_PWM",
 		"","","","",
 		"","","","",
 		"","","","";
 	};
 
-	sled0_fusb302: typec-portc@22 {
+	sled1_fusb302: typec-portc@22 {
 		compatible = "fcs,fusb302";
 		reg = <0x22>;
 
@@ -270,7 +314,11 @@
 
 &i2c1 {
 	status = "okay";
-	/* TODO: Add ADC INA230 */
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
 
 	mp5023@40 {
 		compatible = "mps,mp5023";
@@ -282,7 +330,7 @@
 		reg = <0x4f>;
 	};
 
-	sled1_ioexp: pca9539@76 {
+	sled2_ioexp: pca9539@76 {
 		compatible = "nxp,pca9539";
 		reg = <0x76>;
 		#address-cells = <1>;
@@ -290,14 +338,17 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(M, 1) IRQ_TYPE_LEVEL_LOW>;
+
 		gpio-line-names =
-		"SLED1_MS_DETECT1","SLED1_VBUS_BMC_EN","SLED1_INA230_ALERT","SLED1_P12V_STBY_ALERT",
-		"SLED1_SSD_ALERT","SLED1_MS_DETECT0","SLED1_RST_CCG5","SLED1_FUSB302_INT",
-		"SLED1_MD_STBY_RESET","SLED1_MD_IOEXP_EN_FAULT","SLED1_MD_DIR","SLED1_MD_DECAY",
-		"SLED1_MD_MODE1","SLED1_MD_MODE2","SLED1_MD_MODE3","power-host1";
+		"SLED2_MS_DETECT1","SLED2_VBUS_BMC_EN","SLED2_INA230_ALERT","SLED2_P12V_STBY_ALERT",
+		"SLED2_SSD_ALERT","SLED2_MS_DETECT0","SLED2_RST_CCG5","SLED2_FUSB302_INT",
+		"SLED2_MD_STBY_RESET","SLED2_MD_IOEXP_EN_FAULT","SLED2_MD_DIR","SLED2_MD_DECAY",
+		"SLED2_MD_MODE1","SLED2_MD_MODE2","SLED2_MD_MODE3","power-host2";
 	};
 
-	sled1_leds: pca9552@67 {
+	sled2_leds: pca9552@67 {
 		compatible = "nxp,pca9552";
 		reg = <0x67>;
 		#address-cells = <1>;
@@ -306,13 +357,13 @@
 		#gpio-cells = <2>;
 
 		gpio-line-names =
-		"led-sled1-amber","led-sled1-blue","SLED1_RST_IOEXP","",
+		"led-sled2-amber","led-sled2-blue","SLED2_RST_IOEXP","SLED2_MD_REF_PWM",
 		"","","","",
 		"","","","",
 		"","","","";
 	};
 
-	sled1_fusb302: typec-portc@22 {
+	sled2_fusb302: typec-portc@22 {
 		compatible = "fcs,fusb302";
 		reg = <0x22>;
 
@@ -331,13 +382,13 @@
 	};
 };
 
-&i2c1 {
-	status = "okay";
-};
-
 &i2c2 {
 	status = "okay";
-	/* TODO: Add ADC INA230 */
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
 
 	mp5023@40 {
 		compatible = "mps,mp5023";
@@ -349,7 +400,7 @@
 		reg = <0x4f>;
 	};
 
-	sled2_ioexp: pca9539@76 {
+	sled3_ioexp: pca9539@76 {
 		compatible = "nxp,pca9539";
 		reg = <0x76>;
 		#address-cells = <1>;
@@ -357,14 +408,17 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(M, 2) IRQ_TYPE_LEVEL_LOW>;
+
 		gpio-line-names =
-		"SLED2_MS_DETECT1","SLED2_VBUS_BMC_EN","SLED2_INA230_ALERT","SLED2_P12V_STBY_ALERT",
-		"SLED2_SSD_ALERT","SLED2_MS_DETECT0","SLED2_RST_CCG5","SLED2_FUSB302_INT",
-		"SLED2_MD_STBY_RESET","SLED2_MD_IOEXP_EN_FAULT","SLED2_MD_DIR","SLED2_MD_DECAY",
-		"SLED2_MD_MODE1","SLED2_MD_MODE2","SLED2_MD_MODE3","power-host2";
+		"SLED3_MS_DETECT1","SLED3_VBUS_BMC_EN","SLED3_INA230_ALERT","SLED3_P12V_STBY_ALERT",
+		"SLED3_SSD_ALERT","SLED3_MS_DETECT0","SLED3_RST_CCG5","SLED3_FUSB302_INT",
+		"SLED3_MD_STBY_RESET","SLED3_MD_IOEXP_EN_FAULT","SLED3_MD_DIR","SLED3_MD_DECAY",
+		"SLED3_MD_MODE1","SLED3_MD_MODE2","SLED3_MD_MODE3","power-host3";
 	};
 
-	sled2_leds: pca9552@67 {
+	sled3_leds: pca9552@67 {
 		compatible = "nxp,pca9552";
 		reg = <0x67>;
 		#address-cells = <1>;
@@ -373,13 +427,13 @@
 		#gpio-cells = <2>;
 
 		gpio-line-names =
-		"led-sled2-amber","led-sled2-blue","SLED2_RST_IOEXP","",
+		"led-sled3-amber","led-sled3-blue","SLED3_RST_IOEXP","SLED3_MD_REF_PWM",
 		"","","","",
 		"","","","",
 		"","","","";
 	};
 
-	sled2_fusb302: typec-portc@22 {
+	sled3_fusb302: typec-portc@22 {
 		compatible = "fcs,fusb302";
 		reg = <0x22>;
 
@@ -400,7 +454,11 @@
 
 &i2c3 {
 	status = "okay";
-	/* TODO: Add ADC INA230 */
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
 
 	mp5023@40 {
 		compatible = "mps,mp5023";
@@ -412,7 +470,7 @@
 		reg = <0x4f>;
 	};
 
-	sled3_ioexp: pca9539@76 {
+	sled4_ioexp: pca9539@76 {
 		compatible = "nxp,pca9539";
 		reg = <0x76>;
 		#address-cells = <1>;
@@ -420,14 +478,17 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(M, 3) IRQ_TYPE_LEVEL_LOW>;
+
 		gpio-line-names =
-		"SLED3_MS_DETECT1","SLED3_VBUS_BMC_EN","SLED3_INA230_ALERT","SLED3_P12V_STBY_ALERT",
-		"SLED3_SSD_ALERT","SLED3_MS_DETECT0","SLED3_RST_CCG5","SLED3_FUSB302_INT",
-		"SLED3_MD_STBY_RESET","SLED3_MD_IOEXP_EN_FAULT","SLED3_MD_DIR","SLED3_MD_DECAY",
-		"SLED3_MD_MODE1","SLED3_MD_MODE2","SLED3_MD_MODE3","power-host3";
+		"SLED4_MS_DETECT1","SLED4_VBUS_BMC_EN","SLED4_INA230_ALERT","SLED4_P12V_STBY_ALERT",
+		"SLED4_SSD_ALERT","SLED4_MS_DETECT0","SLED4_RST_CCG5","SLED4_FUSB302_INT",
+		"SLED4_MD_STBY_RESET","SLED4_MD_IOEXP_EN_FAULT","SLED4_MD_DIR","SLED4_MD_DECAY",
+		"SLED4_MD_MODE1","SLED4_MD_MODE2","SLED4_MD_MODE3","power-host4";
 	};
 
-	sled3_leds: pca9552@67 {
+	sled4_leds: pca9552@67 {
 		compatible = "nxp,pca9552";
 		reg = <0x67>;
 		#address-cells = <1>;
@@ -436,13 +497,13 @@
 		#gpio-cells = <2>;
 
 		gpio-line-names =
-		"led-sled3-amber","led-sled3-blue","SLED3_RST_IOEXP","",
+		"led-sled4-amber","led-sled4-blue","SLED4_RST_IOEXP","SLED4_MD_REF_PWM",
 		"","","","",
 		"","","","",
 		"","","","";
 	};
 
-	sled3_fusb302: typec-portc@22 {
+	sled4_fusb302: typec-portc@22 {
 		compatible = "fcs,fusb302";
 		reg = <0x22>;
 
@@ -463,7 +524,11 @@
 
 &i2c4 {
 	status = "okay";
-	/* TODO: Add ADC INA230 */
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
 
 	mp5023@40 {
 		compatible = "mps,mp5023";
@@ -475,7 +540,7 @@
 		reg = <0x4f>;
 	};
 
-	sled4_ioexp: pca9539@76 {
+	sled5_ioexp: pca9539@76 {
 		compatible = "nxp,pca9539";
 		reg = <0x76>;
 		#address-cells = <1>;
@@ -483,14 +548,17 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(M, 4) IRQ_TYPE_LEVEL_LOW>;
+
 		gpio-line-names =
-		"SLED4_MS_DETECT1","SLED4_VBUS_BMC_EN","SLED4_INA230_ALERT","SLED4_P12V_STBY_ALERT",
-		"SLED4_SSD_ALERT","SLED4_MS_DETECT0","SLED4_RST_CCG5","SLED4_FUSB302_INT",
-		"SLED4_MD_STBY_RESET","SLED4_MD_IOEXP_EN_FAULT","SLED4_MD_DIR","SLED4_MD_DECAY",
-		"SLED4_MD_MODE1","SLED4_MD_MODE2","SLED4_MD_MODE3","power-host4";
+		"SLED5_MS_DETECT1","SLED5_VBUS_BMC_EN","SLED5_INA230_ALERT","SLED5_P12V_STBY_ALERT",
+		"SLED5_SSD_ALERT","SLED5_MS_DETECT0","SLED5_RST_CCG5","SLED5_FUSB302_INT",
+		"SLED5_MD_STBY_RESET","SLED5_MD_IOEXP_EN_FAULT","SLED5_MD_DIR","SLED5_MD_DECAY",
+		"SLED5_MD_MODE1","SLED5_MD_MODE2","SLED5_MD_MODE3","power-host5";
 	};
 
-	sled4_leds: pca9552@67 {
+	sled5_leds: pca9552@67 {
 		compatible = "nxp,pca9552";
 		reg = <0x67>;
 		#address-cells = <1>;
@@ -499,13 +567,13 @@
 		#gpio-cells = <2>;
 
 		gpio-line-names =
-		"led-sled4-amber","led-sled4-blue","SLED4_RST_IOEXP","",
+		"led-sled5-amber","led-sled5-blue","SLED5_RST_IOEXP","SLED5_MD_REF_PWM",
 		"","","","",
 		"","","","",
 		"","","","";
 	};
 
-	sled4_fusb302: typec-portc@22 {
+	sled5_fusb302: typec-portc@22 {
 		compatible = "fcs,fusb302";
 		reg = <0x22>;
 
@@ -526,7 +594,11 @@
 
 &i2c5 {
 	status = "okay";
-	/* TODO: Add ADC INA230 */
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
 
 	mp5023@40 {
 		compatible = "mps,mp5023";
@@ -538,7 +610,7 @@
 		reg = <0x4f>;
 	};
 
-	sled5_ioexp: pca9539@76 {
+	sled6_ioexp: pca9539@76 {
 		compatible = "nxp,pca9539";
 		reg = <0x76>;
 		#address-cells = <1>;
@@ -546,14 +618,17 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(M, 5) IRQ_TYPE_LEVEL_LOW>;
+
 		gpio-line-names =
-		"SLED5_MS_DETECT1","SLED5_VBUS_BMC_EN","SLED5_INA230_ALERT","SLED5_P12V_STBY_ALERT",
-		"SLED5_SSD_ALERT","SLED5_MS_DETECT0","SLED5_RST_CCG5","SLED5_FUSB302_INT",
-		"SLED5_MD_STBY_RESET","SLED5_MD_IOEXP_EN_FAULT","SLED5_MD_DIR","SLED5_MD_DECAY",
-		"SLED5_MD_MODE1","SLED5_MD_MODE2","SLED5_MD_MODE3","power-host5";
+		"SLED6_MS_DETECT1","SLED6_VBUS_BMC_EN","SLED6_INA230_ALERT","SLED6_P12V_STBY_ALERT",
+		"SLED6_SSD_ALERT","SLED6_MS_DETECT0","SLED6_RST_CCG5","SLED6_FUSB302_INT",
+		"SLED6_MD_STBY_RESET","SLED6_MD_IOEXP_EN_FAULT","SLED6_MD_DIR","SLED6_MD_DECAY",
+		"SLED6_MD_MODE1","SLED6_MD_MODE2","SLED6_MD_MODE3","power-host6";
 	};
 
-	sled5_leds: pca9552@67 {
+	sled6_leds: pca9552@67 {
 		compatible = "nxp,pca9552";
 		reg = <0x67>;
 		#address-cells = <1>;
@@ -562,13 +637,13 @@
 		#gpio-cells = <2>;
 
 		gpio-line-names =
-		"led-sled5-amber","led-sled5-blue","SLED5_RST_IOEXP","",
+		"led-sled6-amber","led-sled6-blue","SLED6_RST_IOEXP","SLED6_MD_REF_PWM",
 		"","","","",
 		"","","","",
 		"","","","";
 	};
 
-	sled5_fusb302: typec-portc@22 {
+	sled6_fusb302: typec-portc@22 {
 		compatible = "fcs,fusb302";
 		reg = <0x22>;
 
@@ -596,6 +671,7 @@
 	};
 
 	rtc@51 {
+		/* in-chip rtc disabled, use external rtc (battery-backed) */
 		compatible = "nxp,pcf85263";
 		reg = <0x51>;
 	};
@@ -655,6 +731,7 @@
 	adm1278@11 {
 		compatible = "adi,adm1278";
 		reg = <0x11>;
+		shunt-resistor-micro-ohms = <300>;
 	};
 
 	tmp421@4c {
@@ -667,7 +744,7 @@
 		reg = <0x4d>;
 	};
 
-	fan_ioexp: pca9552@67 {
+	fan_leds: pca9552@67 {
 		compatible = "nxp,pca9552";
 		reg = <0x67>;
 		#address-cells = <1>;
@@ -700,36 +777,38 @@
 	/*D0-D7*/	"","","","","","","","",
 	/*E0-E7*/	"","","","","","","","",
 	/*F0-F7*/	"","","","","","","","",
-	/*G0-G7*/	"","SWITCH_FRU_MUX","","","","","","",
+	/*G0-G7*/	"BSM_FRU_WP","SWITCH_FRU_MUX","","",
+			"PWRGD_P1V05_VDDCORE","PWRGD_P1V5_VDD","","",
 	/*H0-H7*/	"presence-riser1","presence-riser2",
-			"presence-sled0","presence-sled1",
-			"presence-sled2","presence-sled3",
-			"presence-sled4","presence-sled5",
+			"presence-sled1","presence-sled2",
+			"presence-sled3","presence-sled4",
+			"presence-sled5","presence-sled6",
 	/*I0-I7*/	"REV_ID0","","REV_ID1","REV_ID2",
-			"","","","",
+			"","BSM_FLASH_WP_STATUS","BMC_TPM_PRES","",
 	/*J0-J7*/	"","","","","","","","",
 	/*K0-K7*/	"","","","","","","","",
-	/*L0-L7*/	"","","","","","","","",
-	/*M0-M7*/	"ALERT_SLED0","ALERT_SLED1",
-			"ALERT_SLED2","ALERT_SLED3",
-			"ALERT_SLED4","ALERT_SLED5",
+	/*L0-L7*/	"","","","","","BMC_RTC_INT","","",
+	/*M0-M7*/	"ALERT_SLED1","ALERT_SLED2",
+			"ALERT_SLED3","ALERT_SLED4",
+			"ALERT_SLED5","ALERT_SLED6",
 			"P12V_AUX_ALERT1","",
 	/*N0-N7*/	"","","","","","","","",
 	/*O0-O7*/	"","","","",
 			"","BOARD_ID0","BOARD_ID1","BOARD_ID2",
-	/*P0-P7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","BMC_HEARTBEAT",
 	/*Q0-Q7*/	"","","","","","","","",
 	/*R0-R7*/	"","","","","","","","",
 	/*S0-S7*/	"","","","BAT_DETECT",
 			"BMC_BT_WP0","BMC_BT_WP1","","",
 	/*T0-T7*/	"","","","","","","","",
 	/*U0-U7*/	"","","","","","","","",
-	/*V0-V7*/	"","RST_BMC_MVL","","",
+	/*V0-V7*/	"PWRGD_CNS_PSU","RST_BMC_MVL","","PSU_PRSNT",
 			"USB2_SEL0_A","USB2_SEL1_A",
 			"USB2_SEL0_B","USB2_SEL1_B",
 	/*W0-W7*/	"RST_FRONT_IOEXP","","","","","","","",
 	/*X0-X7*/	"","","","","","","","",
-	/*Y0-Y7*/	"","","BSM_FLASH_LATCH","","","","","",
+	/*Y0-Y7*/	"BMC_SELF_HW_RST","BSM_PRSNT","BSM_FLASH_LATCH","",
+			"","","","",
 	/*Z0-Z7*/	"","","","","","","","";
 };
 
@@ -754,3 +833,8 @@
 		&pinctrl_adc12_default &pinctrl_adc13_default
 		&pinctrl_adc14_default &pinctrl_adc15_default>;
 };
+
+&mdio3 {
+	status = "okay";
+	/* TODO: Add Marvell 88X3310 */
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
index 22c06ff7a7ed..578f9e2fc7ed 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
@@ -171,9 +171,10 @@
 		/* 48MB region from the end of flash to start of vga memory */
 		ramoops@bc000000 {
 			compatible = "ramoops";
-			reg = <0xbc000000 0x180000>; /* 16 * (3 * 0x8000) */
+			reg = <0xbc000000 0x200000>; /* 16 * (4 * 0x8000) */
 			record-size = <0x8000>;
 			console-size = <0x8000>;
+			ftrace-size = <0x8000>;
 			pmsg-size = <0x8000>;
 			max-reason = <3>; /* KMSG_DUMP_EMERG */
 		};
@@ -269,9 +270,7 @@
 	/*C0-C7*/	"","","","","","","","",
 	/*D0-D7*/	"","","","","","","","",
 	/*E0-E7*/	"","","","","","","","",
-	/*F0-F7*/	"PIN_HOLE_RESET_IN_N","","",
-				"PIN_HOLE_RESET_OUT_N","","",
-				"factory-reset-toggle","",
+	/*F0-F7*/	"","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","","factory-reset-toggle","",
 	/*G0-G7*/	"","","","","","","","",
 	/*H0-H7*/	"led-rtc-battery","led-bmc","led-rear-enc-id0","led-rear-enc-fault0","","","","",
 	/*I0-I7*/	"","","","","","","bmc-secure-boot","",
@@ -2394,6 +2393,10 @@
 	status = "okay";
 };
 
+&uhci {
+	status = "okay";
+};
+
 &emmc_controller {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
index c47974219832..528b49e2c0f8 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
@@ -102,9 +102,10 @@
 
 		ramoops@bc000000 {
 			compatible = "ramoops";
-			reg = <0xbc000000 0x180000>; /* 16 * (3 * 0x8000) */
+			reg = <0xbc000000 0x200000>; /* 16 * (4 * 0x8000) */
 			record-size = <0x8000>;
 			console-size = <0x8000>;
+			ftrace-size = <0x8000>;
 			pmsg-size = <0x8000>;
 			max-reason = <3>; /* KMSG_DUMP_EMERG */
 		};
@@ -239,6 +240,10 @@
 	status = "okay";
 };
 
+&uhci {
+	status = "okay";
+};
+
 &gpio0 {
 	gpio-line-names =
 	/*A0-A7*/	"","","","","","","","",
@@ -246,7 +251,7 @@
 	/*C0-C7*/	"","","","","","","","",
 	/*D0-D7*/	"","","","","","","","",
 	/*E0-E7*/	"","","","","","","","",
-	/*F0-F7*/	"","","","","","","factory-reset-toggle","",
+	/*F0-F7*/	"","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","","factory-reset-toggle","",
 	/*G0-G7*/	"","","","","","","","",
 	/*H0-H7*/	"","bmc-ingraham0","rear-enc-id0","rear-enc-fault0","","","","",
 	/*I0-I7*/	"","","","","","","bmc-secure-boot","",
@@ -2360,30 +2365,6 @@
 	use-ncsi;
 };
 
-&fmc {
-	status = "okay";
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "bmc";
-		spi-max-frequency = <50000000>;
-#include "openbmc-flash-layout-128.dtsi"
-	};
-};
-
-&spi1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_spi1_default>;
-
-	flash@0 {
-		status = "okay";
-		m25p,fast-read;
-		label = "pnor";
-		spi-max-frequency = <100000000>;
-	};
-};
-
 &wdt1 {
 	aspeed,reset-type = "none";
 	aspeed,external-signal;
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
index e39f310d55eb..72b7a6639ed9 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
@@ -197,7 +197,6 @@
 
 	fsi-routing-gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_HIGH>;
 	fsi-mux-gpios = <&gpio0 ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>;
-	cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
 
 	cfam@0,0 {
 		reg = <0 0>;
@@ -877,3 +876,14 @@
 	status = "okay";
 	memory-region = <&vga_memory>;
 };
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-quanta-s6q.dts b/arch/arm/boot/dts/aspeed-bmc-quanta-s6q.dts
new file mode 100644
index 000000000000..69e1bd256271
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-quanta-s6q.dts
@@ -0,0 +1,610 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2022 Quanta Corp.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Quanta S6Q BMC";
+	compatible = "quanta,s6q-bmc", "aspeed,ast2600";
+
+	aliases {
+		// bus 0
+		i2c20 = &SMB_HOST_DB2000_3V3AUX_SCL;
+		i2c21 = &U12_PCA9546_CH1;
+		i2c22 = &SMB_HOST_DB800_B_SCL;
+		i2c23 = &SMB_HOST_DB800_C_SCL;
+
+		// bus 1
+		i2c24 = &SMB_M2_P0_1V8AUX_SCL;
+		i2c25 = &SMB_M2_P1_1V8AUX_SCL;
+		i2c26 = &SMB_CPU_PIROM_3V3AUX_SCL;
+		i2c27 = &SMB_TEMP_3V3AUX_SCL;
+		i2c28 = &SMB_IPMB_3V3AUX_SSDSB_SCL;
+		i2c29 = &SMB_IPMB_3V3AUX_SCL;
+		i2c31 = &SMB_FB_SCL;
+
+		// bus 1 - Fan board
+		i2c32 = &SMB_IOEXP_SCL;
+		i2c33 = &SMB_PROGRAM_SCL;
+		i2c34 = &SMB_FB_SCL_CH2;
+		i2c35 = &SMB_FAN_SENSE_SCL;
+
+		// bus 6
+		i2c36 = &U197_PCA9546_CH0;
+		i2c37 = &U197_PCA9546_CH1;
+		i2c38 = &U197_PCA9546_CH2;
+		i2c39 = &U197_PCA9546_CH3;
+
+		//bus 7
+		i2c40 = &SMB_OCP_SFF_3V3AUX_SCL; //OCP1
+		i2c41 = &SMB_OCP_LFF_3V3AUX_SCL; //OCP2
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200n8 earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			<&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
+			<&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		BMC_HEARTBEAT_N {
+			label="BMC_HEARTBEAT_N";
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		BMC_LED_STATUS_AMBER_N {
+			label="BMC_LED_STATUS_AMBER_N";
+			gpios = <&gpio0 ASPEED_GPIO(S, 6) GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		FM_ID_LED_N {
+			label="FM_ID_LED_N";
+			gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0 - A7*/	"", "", "", "", "", "", "", "",
+	/*B0 - B7*/	"", "", "", "", "", "", "", "",
+	/*C0 - C7*/	"", "", "", "", "", "", "", "",
+	/*D0 - D7*/	"", "", "", "", "", "", "", "",
+	/*E0 - E7*/	"", "", "", "", "", "", "", "",
+	/*F0 - F7*/	"PLTRST_N", "", "PWR_DEBUG_N", "", "", "", "", "",
+	/*G0 - G7*/	"", "", "", "", "", "", "", "",
+	/*H0 - H7*/	"", "", "", "", "", "", "", "",
+	/*I0 - I7*/	"", "", "", "", "", "", "", "",
+	/*J0 - J7*/	"", "", "", "", "", "", "", "",
+	/*K0 - K7*/	"", "", "", "", "", "", "", "",
+	/*L0 - L7*/	"", "", "", "", "PREQ_N", "TCK_MUX_SEL", "", "",
+	/*M0 - M7*/	"", "", "", "PWRGD_SYS_PWROK", "", "PRDY_N", "", "",
+	/*N0 - N7*/	"", "", "", "", "", "", "", "",
+	/*O0 - O7*/	"", "", "", "", "", "", "", "",
+	/*P0 - P7*/	"SYS_BMC_PWRBTN_R_N", "SYS_PWRBTN_N", "FM_MB_RST_BTN", "RST_BMC_RSTBTN_OUT_N", "", "", "", "",
+	/*Q0 - Q7*/	"", "", "", "", "", "", "", "",
+	/*R0 - R7*/	"", "", "", "", "", "", "", "",
+	/*S0 - S7*/	"", "", "", "FP_ID_BTN_SCM_N", "", "", "", "",
+	/*T0 - T7*/	"", "", "", "", "", "", "", "",
+	/*U0 - U7*/	"", "", "", "", "", "", "", "",
+	/*V0 - V7*/	"", "", "", "", "", "SMI", "", "",
+	/*W0 - W7*/	"", "", "", "", "", "", "", "",
+	/*X0 - X7*/	"", "", "", "", "", "", "", "",
+	/*Y0 - Y7*/	"", "", "", "", "", "", "", "",
+	/*Z0 - Z7*/	"FM_BMC_READY_N", "", "", "", "", "", "", "",
+	/*AA0 - AA7*/	"", "", "", "", "", "", "", "",
+	/*AB0 - AB7*/	"", "", "", "", "", "", "", "",
+	/*AC0 - AC7*/	"", "", "", "", "", "", "", "";
+};
+
+&sgpiom0 {
+	status = "okay";
+	ngpios = <128>;
+	bus-frequency = <48000>;
+	gpio-line-names =
+	/* SGPIO input lines */
+	/*IOA0-IOA7*/	"","", "SIO_POWER_GOOD","OA1", "XDP_PRST_N","", "","", "FM_SLPS3_PLD_N","", "FM_SLPS4_PLD_N","", "FM_BIOS_POST_CMPLT_BMC_N","", "FM_ADR_TRIGGER_N","OA7",
+	/*IOB0-IOB7*/	"FM_ADR_COMPLETE","", "FM_PMBUS_ALERT_B_EN","", "PSU0_PRESENT_N","", "PSU1_PRESENT_N","", "PSU0_VIN_BUF_GOOD","", "PSU01_VIN_BUF_GOOD","", "PWRGD_PS0_PWROK_R","", "PWRGD_PS1_PWROK_R","",
+	/*IOC0-IOC7*/	"PWRGD_PS_PWROK_PLD_R","", "CHASSIS_INTRUSION","", "BMC_MFG_MODE","", "FM_BMC_EN_DET_R","", "FM_ME_BT_DONE","", "CPU1_PRESENCE","", "CPU2_PRESENCE","", "IRQ_PSYS_CRIT_N","",
+	/*IOD0-IOD7*/	"","", "CPU1_THERMTRIP","", "CPU2_THERMTRIP","", "CPU1_MEM_THERM_EVENT","", "CPU2_MEM_THERM_EVENT","", "CPU1_VRHOT","", "CPU2_VRHOT","", "","",
+	/*IOE0-IOE7*/	"","", "CPU1_MEM_VRHOT","", "CPU2_MEM_VRHOT","", "","", "PCH_BMC_THERMTRIP","", "","", "","", "","",
+	/*IOF0-IOF7*/	"CPU_ERR0","", "CPU_ERR1","", "CPU_ERR2","", "","", "","", "CPU_CATERR","", "","", "","",
+	/*IOG0-IOG7*/	"","", "","", "","", "","", "","", "","", "","", "","",
+	/*IOH0-IOH7*/	"","", "FP_ID_BTN_R1_N","", "FP_RST_BTN_N","", "","", "","", "FP_PWR_BTN_PLD_N_R","", "","", "","",
+	/*IOI0-IOI7*/	"","", "","", "","", "","", "","", "","", "","", "","",
+	/*IOJ0-IOJ7*/	"","", "","", "","", "","", "","", "","", "","", "","",
+	/*IOK0-IOK7*/	"","", "","", "","", "","", "","", "","", "","", "","",
+	/*IOL0-IOL7*/	"","", "","", "","", "","", "","", "","", "","", "","",
+	/*IOM0-IOM7*/	"","", "","", "","", "","", "","", "","", "","", "","",
+	/*ION0-ION7*/	"","BMC_SW_HEARTBEAT_N_R", "","FP_LED_FAULT_N", "","FP_ID_LED_N", "","FM_BMC_RSTBTN_OUT_N", "","FM_THERMTRIP_DLY_LVC1_R_N", "","", "","RST_PCA9548_SENSOR_PLD_N", "","USB_OC1_REAR_N",
+	/*IOO0-IOO7*/	"","IRQ_TPM_SPI_N", "","", "","IRQ_PCH_SCI_WHEA_R_N", "","IRQ_BMC_PCH_NMI_R", "","H_CPU_NMI_LVC1_R_N", "","", "","", "","FM_JTAG_BMC_PLD_MUX_SEL",
+	/*IOP0-IOP7*/	"IP0","OP0", "","", "","", "","", "","", "","", "","", "IP7","OP7";
+};
+
+&adc0 {
+	vref = <2500>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	vref = <2500>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&mdio2 {
+	status = "okay";
+
+	ethphy2: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mac2 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy2>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii3_default>;
+};
+
+&mac3 {
+	status = "okay";
+
+	phy-mode = "rmii";
+	use-ncsi;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2_default &pinctrl_spi2cs1_default
+		&pinctrl_spi2cs2_default>;
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "spi2:0";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&kcs1 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xCA0>;
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xCA8>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xCA2>;
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	non-removable;
+	bus-width = <4>;
+	max-frequency = <100000000>;
+};
+
+&vhub {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	U34_PWR_ADC@48 {
+		compatible = "ti,ads7830";
+		reg = <0x48>;
+	};
+
+	U35_PWR_ADC@4b {
+		compatible = "ti,ads7830";
+		reg = <0x4b>;
+	};
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		SMB_HOST_DB2000_3V3AUX_SCL: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		U12_PCA9546_CH1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		SMB_HOST_DB800_B_SCL: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		SMB_HOST_DB800_C_SCL: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	i2c-switch@59 {
+		compatible = "nxp,pca9848";
+		reg = <0x59>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		SMB_M2_P0_1V8AUX_SCL: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		SMB_M2_P1_1V8AUX_SCL: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		SMB_CPU_PIROM_3V3AUX_SCL: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		SMB_TEMP_3V3AUX_SCL: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			U163_tmp75@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+			U114_tmp75@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+		};
+
+		SMB_IPMB_3V3AUX_SSDSB_SCL: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			U4_tmp75@4c {
+				compatible = "ti,tmp75";
+				reg = <0x4c>;
+			};
+			U73_tmp75@4d {
+				compatible = "ti,tmp75";
+				reg = <0x4d>;
+			};
+		};
+
+		SMB_IPMB_3V3AUX_SCL: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			U190_fru@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+				pagesize = <32>;
+			};
+		};
+
+		SMB_FB_SCL: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+
+			i2c-switch@77 {
+				compatible = "nxp,pca9546";
+				reg = <0x77>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c-mux-idle-disconnect;
+
+				SMB_IOEXP_SCL: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				SMB_PROGRAM_SCL: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				SMB_FB_SCL_CH2: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				SMB_FAN_SENSE_SCL: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+
+					Current_Meter_U2@45 {
+						compatible = "ti,ina219";
+						reg = <0x45>;
+						shunt-resistor = <1000>; /* = 1 mOhm */
+					};
+
+					Current_Meter_U3@44 {
+						compatible = "ti,ina219";
+						reg = <0x44>;
+						shunt-resistor = <1000>; /* = 1 mOhm */
+					};
+
+					TEMP_sensor_U2@4b {
+						compatible = "ti,tmp75";
+						reg = <0x4b>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	bus-frequency = <400000>;
+
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	/* MB FRU (U173) @ 0xA2 */
+	mb_fru: mb_fru@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+
+	/* FP_U1 Inlet */
+	FP_U1_tmp75@4a {
+		compatible = "ti,tmp75";
+		reg = <0x4a>;
+	};
+
+	FP_U4_fru@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+
+	i2c-switch@77 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;
+
+		U197_PCA9546_CH0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		U197_PCA9546_CH1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			cpu0_pvccin@60 {
+				compatible = "isil,raa229004";
+				reg = <0x60>;
+			};
+
+			cpu0_pvccinfaon@61 {
+				compatible = "isil,isl69260";
+				reg = <0x61>;
+			};
+
+			cpu0_pvccd_hv@63 {
+				compatible = "isil,isl69260";
+				reg = <0x63>;
+			};
+		};
+
+		U197_PCA9546_CH2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			cpu1_pvccin@72 {
+				compatible = "isil,raa229004";
+				reg = <0x72>;
+			};
+
+			cpu1_pvccinfaon@74 {
+				compatible = "isil,isl69260";
+				reg = <0x74>;
+			};
+
+			cpu1_pvccd_hv@76 {
+				compatible = "isil,isl69260";
+				reg = <0x76>;
+			};
+		};
+
+		U197_PCA9546_CH3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	i2c-switch@75 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c-mux-idle-disconnect;
+
+		SMB_OCP_SFF_3V3AUX_SCL: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		SMB_OCP_LFF_3V3AUX_SCL: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c14 {
+	status = "okay";
+
+	/* SCM FRU (U19) @ 0xA2 */
+	scm_fru: scm_fru@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+
+	scm_tmp75_u4@4a {
+		compatible = "ti,tmp75";
+		reg = <0x4a>;
+	};
+};
+
+&i2c15 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi b/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
index 6dde51c2aed3..e4775bbceecc 100644
--- a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
@@ -118,7 +118,7 @@
 	};
 
 	pinctrl_fwqspid_default: fwqspid_default {
-		function = "FWQSPID";
+		function = "FWSPID";
 		groups = "FWQSPID";
 	};
 
diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts
index b1068cca4228..7719ea3d4933 100644
--- a/arch/arm/boot/dts/at91-sam9x60ek.dts
+++ b/arch/arm/boot/dts/at91-sam9x60ek.dts
@@ -48,11 +48,11 @@
 			status = "okay";
 		};
 
-		vdd_1v5: fixed-regulator-vdd_1v5@1 {
+		vdd_1v15: fixed-regulator-vdd_1v15@1 {
 			compatible = "regulator-fixed";
-			regulator-name = "VDD_1V5";
-			regulator-min-microvolt = <1500000>;
-			regulator-max-microvolt = <1500000>;
+			regulator-name = "VDD_1V15";
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
 			regulator-always-on;
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/at91-sama7g5ek.dts b/arch/arm/boot/dts/at91-sama7g5ek.dts
index ccf9e224da78..08685a10eda1 100644
--- a/arch/arm/boot/dts/at91-sama7g5ek.dts
+++ b/arch/arm/boot/dts/at91-sama7g5ek.dts
@@ -131,6 +131,18 @@
 	status = "okay";
 };
 
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can0_default>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1_default>;
+	status = "okay";
+};
+
 &cpu0 {
 	cpu-supply = <&vddcpu>;
 };
@@ -239,6 +251,7 @@
 
 					regulator-state-standby {
 						regulator-on-in-suspend;
+						regulator-suspend-microvolt = <3300000>;
 						regulator-mode = <4>;
 					};
 
@@ -279,6 +292,7 @@
 
 					regulator-state-standby {
 						regulator-on-in-suspend;
+						regulator-suspend-voltage = <1150000>;
 						regulator-mode = <4>;
 					};
 
@@ -290,7 +304,7 @@
 
 				vddcpu: VDD_OTHER {
 					regulator-name = "VDD_OTHER";
-					regulator-min-microvolt = <1125000>;
+					regulator-min-microvolt = <1050000>;
 					regulator-max-microvolt = <1850000>;
 					regulator-initial-mode = <2>;
 					regulator-allowed-modes = <2>, <4>;
@@ -299,6 +313,7 @@
 
 					regulator-state-standby {
 						regulator-on-in-suspend;
+						regulator-suspend-voltage = <1050000>;
 						regulator-mode = <4>;
 					};
 
@@ -315,6 +330,7 @@
 					regulator-always-on;
 
 					regulator-state-standby {
+						regulator-suspend-voltage = <1800000>;
 						regulator-on-in-suspend;
 					};
 
@@ -329,6 +345,7 @@
 					regulator-max-microvolt = <3700000>;
 
 					regulator-state-standby {
+						regulator-suspend-voltage = <1800000>;
 						regulator-on-in-suspend;
 					};
 
@@ -454,6 +471,19 @@
 };
 
 &pioA {
+
+	pinctrl_can0_default: can0_default {
+		pinmux = <PIN_PD12__CANTX0>,
+			 <PIN_PD13__CANRX0 >;
+		bias-disable;
+	};
+
+	pinctrl_can1_default: can1_default {
+		pinmux = <PIN_PD14__CANTX1>,
+			 <PIN_PD15__CANRX1 >;
+		bias-disable;
+	};
+
 	pinctrl_flx0_default: flx0_default {
 		pinmux = <PIN_PE3__FLEXCOM0_IO0>,
 			 <PIN_PE4__FLEXCOM0_IO1>,
diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index dff18fc9a906..89af57482bc8 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -290,6 +290,7 @@
 
 		hvs: hvs@7e400000 {
 			compatible = "brcm,bcm2711-hvs";
+			reg = <0x7e400000 0x8000>;
 			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
@@ -458,12 +459,26 @@
 		#size-cells = <0>;
 		enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
 
+		/* Source for d/i-cache-line-size and d/i-cache-sets
+		 * https://developer.arm.com/documentation/100095/0003
+		 * /Level-1-Memory-System/About-the-L1-memory-system?lang=en
+		 * Source for d/i-cache-size
+		 * https://www.raspberrypi.com/documentation/computers
+		 * /processors.html#bcm2711
+		 */
 		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a72";
 			reg = <0>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000d8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+			next-level-cache = <&l2>;
 		};
 
 		cpu1: cpu@1 {
@@ -472,6 +487,13 @@
 			reg = <1>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000e0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+			next-level-cache = <&l2>;
 		};
 
 		cpu2: cpu@2 {
@@ -480,6 +502,13 @@
 			reg = <2>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000e8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+			next-level-cache = <&l2>;
 		};
 
 		cpu3: cpu@3 {
@@ -488,6 +517,28 @@
 			reg = <3>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000f0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+			next-level-cache = <&l2>;
+		};
+
+		/* Source for d/i-cache-line-size and d/i-cache-sets
+		 *  https://developer.arm.com/documentation/100095/0003
+		 *  /Level-2-Memory-System/About-the-L2-memory-system?lang=en
+		 *  Source for d/i-cache-size
+		 *  https://www.raspberrypi.com/documentation/computers
+		 *  /processors.html#bcm2711
+		 */
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-size = <0x100000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>; // 1MiB(size)/64(line-size)=16384ways/16-way set
+			cache-level = <2>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
index 0549686134ea..1c90e5a44283 100644
--- a/arch/arm/boot/dts/bcm2835.dtsi
+++ b/arch/arm/boot/dts/bcm2835.dtsi
@@ -14,6 +14,23 @@
 			device_type = "cpu";
 			compatible = "arm,arm1176jzf-s";
 			reg = <0x0>;
+			/* Source for d/i-cache-line-size and d/i-cache-sets
+			 * https://developer.arm.com/documentation/ddi0301
+			 * /h/level-one-memory-system/cache-organization?lang=en
+			 *
+			 * Source for d/i-cache-size
+			 * https://forums.raspberrypi.com/viewtopic.php?t=98428
+			 *
+			 * NOTE: The BCM2835 has a L2 cache but it is dedicated to the GPU
+			 * It can be shared with the CPU through fw settings,
+			 * but this is not recommended.
+			 */
+			d-cache-size = <0x4000>;
+			d-cache-line-size = <16>;
+			d-cache-sets = <256>; // 16KiB(size)/16(line-size)=1024ways/4-way set
+			i-cache-size = <0x4000>;
+			i-cache-line-size = <16>;
+			i-cache-sets = <256>; // 16KiB(size)/16(line-size)=1024ways/4-way set
 		};
 	};
 
diff --git a/arch/arm/boot/dts/bcm2836.dtsi b/arch/arm/boot/dts/bcm2836.dtsi
index b390006aef79..534dacfc4dd5 100644
--- a/arch/arm/boot/dts/bcm2836.dtsi
+++ b/arch/arm/boot/dts/bcm2836.dtsi
@@ -41,11 +41,26 @@
 		#size-cells = <0>;
 		enable-method = "brcm,bcm2836-smp";
 
+		/* Source for d/i-cache-line-size and d/i-cache-sets
+		 * https://developer.arm.com/documentation/ddi0464/f/L1-Memory-System
+		 * /About-the-L1-memory-system?lang=en
+		 *
+		 * Source for d/i-cache-size
+		 * https://forums.raspberrypi.com/viewtopic.php?t=98428
+		 */
+
 		v7_cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0xf00>;
 			clock-frequency = <800000000>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <32>;
+			i-cache-sets = <512>; // 32KiB(size)/32(line-size)=1024ways/2-way set
+			next-level-cache = <&l2>;
 		};
 
 		v7_cpu1: cpu@1 {
@@ -53,6 +68,13 @@
 			compatible = "arm,cortex-a7";
 			reg = <0xf01>;
 			clock-frequency = <800000000>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <32>;
+			i-cache-sets = <512>; // 32KiB(size)/32(line-size)=1024ways/2-way set
+			next-level-cache = <&l2>;
 		};
 
 		v7_cpu2: cpu@2 {
@@ -60,6 +82,13 @@
 			compatible = "arm,cortex-a7";
 			reg = <0xf02>;
 			clock-frequency = <800000000>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <32>;
+			i-cache-sets = <512>; // 32KiB(size)/32(line-size)=1024ways/2-way set
+			next-level-cache = <&l2>;
 		};
 
 		v7_cpu3: cpu@3 {
@@ -67,6 +96,27 @@
 			compatible = "arm,cortex-a7";
 			reg = <0xf03>;
 			clock-frequency = <800000000>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <32>;
+			i-cache-sets = <512>; // 32KiB(size)/32(line-size)=1024ways/2-way set
+			next-level-cache = <&l2>;
+		};
+
+		/* Source for cache-line-size + cache-sets
+		 * https://developer.arm.com/documentation/ddi0464/f/L2-Memory-System
+		 * /About-the-L2-Memory-system?lang=en
+		 * Source for cache-size
+		 * https://forums.raspberrypi.com/viewtopic.php?t=98428
+		 */
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>; // 512KiB(size)/64(line-size)=8192ways/8-way set
+			cache-level = <2>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/bcm2837-rpi-zero-2-w.dts b/arch/arm/boot/dts/bcm2837-rpi-zero-2-w.dts
new file mode 100644
index 000000000000..4a768562985e
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2837-rpi-zero-2-w.dts
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2022 Stefan Wahren <stefan.wahren@i2se.com>
+ */
+
+/dts-v1/;
+#include "bcm2837.dtsi"
+#include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-usb-otg.dtsi"
+#include "bcm283x-rpi-wifi-bt.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-zero-2-w", "brcm,bcm2837";
+	model = "Raspberry Pi Zero 2 W";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x20000000>;
+	};
+
+	chosen {
+		/* 8250 auxiliary UART instead of pl011 */
+		stdout-path = "serial1:115200n8";
+	};
+
+	leds {
+		led-act {
+			gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&bt {
+	shutdown-gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
+};
+
+&gpio {
+	/*
+	 * This is based on the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "NC" = not connected (no rail from the SoC)
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "HDMI_HPD_N",
+			  "STATUS_LED_N",
+			  "NC", /* GPIO30 */
+			  "NC", /* GPIO31 */
+			  "NC", /* GPIO32 */
+			  "NC", /* GPIO33 */
+			  "NC", /* GPIO34 */
+			  "NC", /* GPIO35 */
+			  "NC", /* GPIO36 */
+			  "NC", /* GPIO37 */
+			  "NC", /* GPIO38 */
+			  "NC", /* GPIO39 */
+			  "CAM_GPIO0", /* GPIO40 */
+			  "WL_ON", /* GPIO41 */
+			  "BT_ON", /* GPIO42 */
+			  "WIFI_CLK", /* GPIO43 */
+			  "SDA0", /* GPIO44 */
+			  "SCL0", /* GPIO45 */
+			  "SMPS_SCL",
+			  "SMPS_SDA",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-0 = <&gpioout &alt0>;
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&sdhci {
+	pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>;
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio32 &uart0_ctsrts_gpio30>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_gpio14>;
+	status = "okay";
+};
+
+&wifi_pwrseq {
+	reset-gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/bcm2837.dtsi b/arch/arm/boot/dts/bcm2837.dtsi
index 0199ec98cd61..5dbdebc46259 100644
--- a/arch/arm/boot/dts/bcm2837.dtsi
+++ b/arch/arm/boot/dts/bcm2837.dtsi
@@ -40,12 +40,26 @@
 		#size-cells = <0>;
 		enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
 
+		/* Source for d/i-cache-line-size and d/i-cache-sets
+		 * https://developer.arm.com/documentation/ddi0500/e/level-1-memory-system
+		 * /about-the-l1-memory-system?lang=en
+		 *
+		 * Source for d/i-cache-size
+		 * https://magpi.raspberrypi.com/articles/raspberry-pi-3-specs-benchmarks
+		 */
 		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53";
 			reg = <0>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000d8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
 		};
 
 		cpu1: cpu@1 {
@@ -54,6 +68,13 @@
 			reg = <1>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000e0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
 		};
 
 		cpu2: cpu@2 {
@@ -62,6 +83,13 @@
 			reg = <2>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000e8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
 		};
 
 		cpu3: cpu@3 {
@@ -70,6 +98,27 @@
 			reg = <3>;
 			enable-method = "spin-table";
 			cpu-release-addr = <0x0 0x000000f0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
+		};
+
+		/* Source for cache-line-size + cache-sets
+		 * https://developer.arm.com/documentation/ddi0500
+		 * /e/level-2-memory-system/about-the-l2-memory-system?lang=en
+		 * Source for cache-size
+		 * https://datasheets.raspberrypi.com/cm/cm1-and-cm3-datasheet.pdf
+		 */
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>; // 512KiB(size)/64(line-size)=8192ways/16-way set
+			cache-level = <2>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
index 249476fdad7a..82f9629f0abb 100644
--- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
+++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
@@ -93,6 +93,82 @@
 			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
 		};
 	};
+
+	switch {
+		compatible = "realtek,rtl8365mb";
+		/* 7 = MDIO (has input reads), 6 = MDC (clock, output only) */
+		mdc-gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
+		mdio-gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+		realtek,disable-leds;
+		dsa,member = <1 0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan5";
+				phy-handle = <&ethphy0>;
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan6";
+				phy-handle = <&ethphy1>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan7";
+				phy-handle = <&ethphy2>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan8";
+				phy-handle = <&ethphy3>;
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "cpu";
+				ethernet = <&sw0_p5>;
+				phy-mode = "rgmii";
+				tx-internal-delay-ps = <2000>;
+				rx-internal-delay-ps = <2100>;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+					pause;
+				};
+			};
+		};
+
+		mdio {
+			compatible = "realtek,smi-mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ethphy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+
+			ethphy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+
+			ethphy2: ethernet-phy@2 {
+				reg = <2>;
+			};
+
+			ethphy3: ethernet-phy@3 {
+				reg = <3>;
+			};
+		};
+	};
 };
 
 &srab {
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
index 24ae3c8a3e09..9efcb2424228 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
@@ -25,6 +25,9 @@
 	nvram@1eff0000 {
 		compatible = "brcm,nvram";
 		reg = <0x1eff0000 0x10000>;
+
+		et0macaddr: et0macaddr {
+		};
 	};
 
 	leds {
@@ -72,6 +75,11 @@
 	};
 };
 
+&gmac0 {
+	nvmem-cells = <&et0macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
 &usb3 {
 	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
 };
diff --git a/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
index ba01054a76cf..58b7d9fc7574 100644
--- a/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
+++ b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
@@ -57,10 +57,9 @@
 
 		led-4 {
 			/* amber:power */
-			function = LED_FUNCTION_POWER;
+			function = LED_FUNCTION_FAULT;
 			color = <LED_COLOR_ID_AMBER>;
 			gpios = <&gpioa 3 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
 		};
 
 		led-5 {
diff --git a/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi b/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi
index 7c487c74fd10..576cfc52567b 100644
--- a/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi
+++ b/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi
@@ -106,10 +106,9 @@
 
 		led-a {
 			/* amber:power */
-			function = LED_FUNCTION_POWER;
+			function = LED_FUNCTION_FAULT;
 			color = <LED_COLOR_ID_AMBER>;
 			gpios = <&gpioa 0 GPIO_ACTIVE_LOW>;
-			default-state = "on";
 		};
 
 		led-b {
diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi b/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
index 6519b7c61af1..b0854d881ac6 100644
--- a/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
+++ b/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
@@ -22,7 +22,7 @@
 		};
 
 		led-2 {
-			function = LED_FUNCTION_INDICATOR;
+			function = LED_FUNCTION_POWER;
 			color = <LED_COLOR_ID_GREEN>;
 			pwms = <&pwm 2 50000>;
 			max-brightness = <255>;
@@ -39,6 +39,8 @@
 
 &amac2 {
 	status = "okay";
+	nvmem-cells = <&mac_address>;
+	nvmem-cell-names = "mac-address";
 };
 
 &ehci0 {
@@ -53,6 +55,12 @@
 		reg = <0x50>;
 		pagesize = <32>;
 		read-only;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		mac_address: mac-address@66 {
+			reg = <0x66 0x6>;
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
index 956a26d52a4c..0a11bacffc1f 100644
--- a/arch/arm/boot/dts/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/dra7-l4.dtsi
@@ -3482,8 +3482,7 @@
 				ti,timer-pwm;
 			};
 		};
-
-		target-module@2c000 {			/* 0x4882c000, ap 17 02.0 */
+		timer15_target: target-module@2c000 {	/* 0x4882c000, ap 17 02.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
 			reg = <0x2c000 0x4>,
 			      <0x2c010 0x4>;
@@ -3511,7 +3510,7 @@
 			};
 		};
 
-		target-module@2e000 {			/* 0x4882e000, ap 19 14.0 */
+		timer16_target: target-module@2e000 {	/* 0x4882e000, ap 19 14.0 */
 			compatible = "ti,sysc-omap4-timer", "ti,sysc";
 			reg = <0x2e000 0x4>,
 			      <0x2e010 0x4>;
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 6b485cbed8d5..97ce0c4f1df7 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -160,7 +160,7 @@
 		target-module@48210000 {
 			compatible = "ti,sysc-omap4-simple", "ti,sysc";
 			power-domains = <&prm_mpu>;
-			clocks = <&mpu_clkctrl DRA7_MPU_CLKCTRL 0>;
+			clocks = <&mpu_clkctrl DRA7_MPU_MPU_CLKCTRL 0>;
 			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -875,10 +875,10 @@
 			      <0x58000014 4>;
 			reg-names = "rev", "syss";
 			ti,syss-mask = <1>;
-			clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 0>,
-				 <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 9>,
-				 <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 10>,
-				 <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 11>;
+			clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 0>,
+				 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 9>,
+				 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 10>,
+				 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 11>;
 			clock-names = "fck", "hdmi_clk", "sys_clk", "tv_clk";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -912,7 +912,7 @@
 							 SYSC_OMAP2_SOFTRESET |
 							 SYSC_OMAP2_AUTOIDLE)>;
 					ti,syss-mask = <1>;
-					clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 8>;
+					clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>;
 					clock-names = "fck";
 					#address-cells = <1>;
 					#size-cells = <1>;
@@ -939,8 +939,8 @@
 							<SYSC_IDLE_SMART>,
 							<SYSC_IDLE_SMART_WKUP>;
 					ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET)>;
-					clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 9>,
-						 <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 8>;
+					clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 9>,
+						 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>;
 					clock-names = "fck", "dss_clk";
 					#address-cells = <1>;
 					#size-cells = <1>;
@@ -979,7 +979,7 @@
 				compatible = "vivante,gc";
 				reg = <0x0 0x700>;
 				interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&dss_clkctrl DRA7_BB2D_CLKCTRL 0>;
+				clocks = <&dss_clkctrl DRA7_DSS_BB2D_CLKCTRL 0>;
 				clock-names = "core";
 			};
 		};
@@ -1333,26 +1333,26 @@
 	ti,no-reset-on-init;
 	ti,no-idle;
 	timer@0 {
-		assigned-clocks = <&wkupaon_clkctrl DRA7_TIMER1_CLKCTRL 24>;
+		assigned-clocks = <&wkupaon_clkctrl DRA7_WKUPAON_TIMER1_CLKCTRL 24>;
 		assigned-clock-parents = <&sys_32k_ck>;
 	};
 };
 
 /* Local timers, see ARM architected timer wrap erratum i940 */
-&timer3_target {
+&timer15_target {
 	ti,no-reset-on-init;
 	ti,no-idle;
 	timer@0 {
-		assigned-clocks = <&l4per_clkctrl DRA7_L4PER_TIMER3_CLKCTRL 24>;
+		assigned-clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER15_CLKCTRL 24>;
 		assigned-clock-parents = <&timer_sys_clk_div>;
 	};
 };
 
-&timer4_target {
+&timer16_target {
 	ti,no-reset-on-init;
 	ti,no-idle;
 	timer@0 {
-		assigned-clocks = <&l4per_clkctrl DRA7_L4PER_TIMER4_CLKCTRL 24>;
+		assigned-clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER16_CLKCTRL 24>;
 		assigned-clock-parents = <&timer_sys_clk_div>;
 	};
 };
diff --git a/arch/arm/boot/dts/en7523-evb.dts b/arch/arm/boot/dts/en7523-evb.dts
new file mode 100644
index 000000000000..a8d8bb0419a0
--- /dev/null
+++ b/arch/arm/boot/dts/en7523-evb.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/dts-v1/;
+
+/* Bootloader installs ATF here */
+/memreserve/ 0x80000000 0x200000;
+
+#include "en7523.dtsi"
+
+/ {
+	model = "Airoha EN7523 Evaluation Board";
+	compatible = "airoha,en7523-evb", "airoha,en7523";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+		stdout-path = "serial0:115200n8";
+		linux,usable-memory-range = <0x80200000 0x1fe00000>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/en7523.dtsi b/arch/arm/boot/dts/en7523.dtsi
new file mode 100644
index 000000000000..36597f587f46
--- /dev/null
+++ b/arch/arm/boot/dts/en7523.dtsi
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		npu_binary@84000000 {
+			no-map;
+			reg = <0x84000000 0xA00000>;
+		};
+
+		npu_flag@84B0000 {
+			no-map;
+			reg = <0x84B00000 0x100000>;
+		};
+
+		npu_pkt@85000000 {
+			no-map;
+			reg = <0x85000000 0x1A00000>;
+		};
+
+		npu_phyaddr@86B00000 {
+			no-map;
+			reg = <0x86B00000 0x100000>;
+		};
+
+		npu_rxdesc@86D00000 {
+			no-map;
+			reg = <0x86D00000 0x100000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			enable-method = "psci";
+			clock-frequency = <80000000>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			enable-method = "psci";
+			clock-frequency = <80000000>;
+			next-level-cache = <&L2_0>;
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	gic: interrupt-controller@9000000 {
+		compatible = "arm,gic-v3";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x09000000 0x20000>,
+		      <0x09080000 0x80000>,
+		      <0x09400000 0x2000>,
+		      <0x09500000 0x2000>,
+		      <0x09600000 0x20000>;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	uart1: serial@1fbf0000 {
+		compatible = "ns16550";
+		reg = <0x1fbf0000 0x30>;
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <1843200>;
+		status = "okay";
+	};
+
+	gpio0: gpio@1fbf0200 {
+		compatible = "airoha,en7523-gpio";
+		reg = <0x1fbf0204 0x4>,
+		      <0x1fbf0200 0x4>,
+		      <0x1fbf0220 0x4>,
+		      <0x1fbf0214 0x4>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio1: gpio@1fbf0270 {
+		compatible = "airoha,en7523-gpio";
+		reg = <0x1fbf0270 0x4>,
+		      <0x1fbf0260 0x4>,
+		      <0x1fbf0264 0x4>,
+		      <0x1fbf0278 0x4>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi
index 829c05b2c405..7b429622a288 100644
--- a/arch/arm/boot/dts/exynos3250-artik5.dtsi
+++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi
@@ -356,7 +356,7 @@
 };
 
 &pinctrl_1 {
-	bten: bten {
+	bten: bten-pins {
 		samsung,pins ="gpx1-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
@@ -364,7 +364,7 @@
 		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_DOWN>;
 	};
 
-	wlanen: wlanen {
+	wlanen: wlanen-pins {
 		samsung,pins = "gpx2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -372,12 +372,12 @@
 		samsung,pin-val = <1>;
 	};
 
-	s2mps14_irq: s2mps14-irq {
+	s2mps14_irq: s2mps14-irq-pins {
 		samsung,pins = "gpx3-5";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	bthostwake: bthostwake {
+	bthostwake: bthostwake-pins {
 		samsung,pins = "gpx3-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
@@ -385,7 +385,7 @@
 		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	btwake: btwake {
+	btwake: btwake-pins {
 		samsung,pins = "gpx3-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts
index 8b41a9d5e2db..02a9dc479d34 100644
--- a/arch/arm/boot/dts/exynos3250-monk.dts
+++ b/arch/arm/boot/dts/exynos3250-monk.dts
@@ -69,7 +69,7 @@
 			reg = <0x25>;
 			wakeup-source;
 
-			muic: max77836-muic {
+			extcon {
 				compatible = "maxim,max77836-muic";
 			};
 
diff --git a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
index dff3c6e3aa1f..cc30d154ec94 100644
--- a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
@@ -12,47 +12,22 @@
 #include <dt-bindings/pinctrl/samsung.h>
 
 #define PIN_IN(_pin, _pull, _drv)					\
-	_pin {								\
+	pin- ## _pin {							\
 		samsung,pins = #_pin;					\
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;		\
 		samsung,pin-pud = <EXYNOS_PIN_PULL_ ##_pull>;		\
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_ ##_drv>;		\
 	}
 
-#define PIN_OUT(_pin, _drv)						\
-	_pin {								\
-		samsung,pins = #_pin;					\
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;	\
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;		\
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_ ##_drv>;		\
-	}
-
-#define PIN_OUT_SET(_pin, _val, _drv)					\
-	_pin {								\
-		samsung,pins = #_pin;					\
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;	\
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;		\
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_ ##_drv>;		\
-		samsung,pin-val = <_val>;				\
-	}
-
-#define PIN_CFG(_pin, _sel, _pull, _drv)				\
-	_pin {								\
-		samsung,pins = #_pin;					\
-		samsung,pin-function = <_sel>;				\
-		samsung,pin-pud = <EXYNOS_PIN_PULL_ ##_pull>;		\
-		samsung,pin-drv = <EXYNOS4_PIN_DRV_ ##_drv>;		\
-	}
-
 #define PIN_SLP(_pin, _mode, _pull)					\
-	_pin {								\
+	pin- ## _pin {							\
 		samsung,pins = #_pin;					\
 		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_ ##_mode>;	\
 		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_ ##_pull>;	\
 	}
 
 &pinctrl_0 {
-	gpa0: gpa0 {
+	gpa0: gpa0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -60,7 +35,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpa1: gpa1 {
+	gpa1: gpa1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -68,7 +43,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb: gpb {
+	gpb: gpb-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -76,7 +51,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc0: gpc0 {
+	gpc0: gpc0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -84,7 +59,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc1: gpc1 {
+	gpc1: gpc1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -92,7 +67,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd0: gpd0 {
+	gpd0: gpd0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -100,7 +75,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd1: gpd1 {
+	gpd1: gpd1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -108,84 +83,84 @@
 		#interrupt-cells = <2>;
 	};
 
-	uart0_data: uart0-data {
+	uart0_data: uart0-data-pins {
 		samsung,pins = "gpa0-0", "gpa0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart0_fctl: uart0-fctl {
+	uart0_fctl: uart0-fctl-pins {
 		samsung,pins = "gpa0-2", "gpa0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart1_data: uart1-data {
+	uart1_data: uart1-data-pins {
 		samsung,pins = "gpa0-4", "gpa0-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart1_fctl: uart1-fctl {
+	uart1_fctl: uart1-fctl-pins {
 		samsung,pins = "gpa0-6", "gpa0-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c2_bus: i2c2-bus {
+	i2c2_bus: i2c2-bus-pins {
 		samsung,pins = "gpa0-6", "gpa0-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart2_data: uart2-data {
+	uart2_data: uart2-data-pins {
 		samsung,pins = "gpa1-0", "gpa1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c3_bus: i2c3-bus {
+	i2c3_bus: i2c3-bus-pins {
 		samsung,pins = "gpa1-2", "gpa1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	spi0_bus: spi0-bus {
+	spi0_bus: spi0-bus-pins {
 		samsung,pins = "gpb-0", "gpb-2", "gpb-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c4_bus: i2c4-bus {
+	i2c4_bus: i2c4-bus-pins {
 		samsung,pins = "gpb-0", "gpb-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	spi1_bus: spi1-bus {
+	spi1_bus: spi1-bus-pins {
 		samsung,pins = "gpb-4", "gpb-6", "gpb-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c5_bus: i2c5-bus {
+	i2c5_bus: i2c5-bus-pins {
 		samsung,pins = "gpb-2", "gpb-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2s2_bus: i2s2-bus {
+	i2s2_bus: i2s2-bus-pins {
 		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 				"gpc1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -193,7 +168,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pcm2_bus: pcm2-bus {
+	pcm2_bus: pcm2-bus-pins {
 		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 				"gpc1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -201,63 +176,63 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c6_bus: i2c6-bus {
+	i2c6_bus: i2c6-bus-pins {
 		samsung,pins = "gpc1-3", "gpc1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm0_out: pwm0-out {
+	pwm0_out: pwm0-out-pins {
 		samsung,pins = "gpd0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm1_out: pwm1-out {
+	pwm1_out: pwm1-out-pins {
 		samsung,pins = "gpd0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c7_bus: i2c7-bus {
+	i2c7_bus: i2c7-bus-pins {
 		samsung,pins = "gpd0-2", "gpd0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm2_out: pwm2-out {
+	pwm2_out: pwm2-out-pins {
 		samsung,pins = "gpd0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm3_out: pwm3-out {
+	pwm3_out: pwm3-out-pins {
 		samsung,pins = "gpd0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c0_bus: i2c0-bus {
+	i2c0_bus: i2c0-bus-pins {
 		samsung,pins = "gpd1-0", "gpd1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	mipi0_clk: mipi0-clk {
+	mipi0_clk: mipi0-clk-pins {
 		samsung,pins = "gpd1-0", "gpd1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c1_bus: i2c1-bus {
+	i2c1_bus: i2c1-bus-pins {
 		samsung,pins = "gpd1-2", "gpd1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
@@ -266,22 +241,22 @@
 };
 
 &pinctrl_1 {
-	gpe0: gpe0 {
+	gpe0: gpe0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpe1: gpe1 {
+	gpe1: gpe1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpe2: gpe2 {
+	gpe2: gpe2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpk0: gpk0 {
+	gpk0: gpk0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -289,7 +264,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpk1: gpk1 {
+	gpk1: gpk1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -297,7 +272,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpk2: gpk2 {
+	gpk2: gpk2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -305,7 +280,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpl0: gpl0 {
+	gpl0: gpl0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -313,7 +288,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpm0: gpm0 {
+	gpm0: gpm0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -321,7 +296,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpm1: gpm1 {
+	gpm1: gpm1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -329,7 +304,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpm2: gpm2 {
+	gpm2: gpm2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -337,7 +312,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpm3: gpm3 {
+	gpm3: gpm3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -345,7 +320,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpm4: gpm4 {
+	gpm4: gpm4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -353,7 +328,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx0: gpx0 {
+	gpx0: gpx0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -370,7 +345,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx1: gpx1 {
+	gpx1: gpx1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -387,7 +362,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx2: gpx2 {
+	gpx2: gpx2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -395,7 +370,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx3: gpx3 {
+	gpx3: gpx3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -403,126 +378,126 @@
 		#interrupt-cells = <2>;
 	};
 
-	sd0_clk: sd0-clk {
+	sd0_clk: sd0-clk-pins {
 		samsung,pins = "gpk0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_cmd: sd0-cmd {
+	sd0_cmd: sd0-cmd-pins {
 		samsung,pins = "gpk0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_cd: sd0-cd {
+	sd0_cd: sd0-cd-pins {
 		samsung,pins = "gpk0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_rdqs: sd0-rdqs {
+	sd0_rdqs: sd0-rdqs-pins {
 		samsung,pins = "gpk0-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_bus1: sd0-bus-width1 {
+	sd0_bus1: sd0-bus-width1-pins {
 		samsung,pins = "gpk0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_bus4: sd0-bus-width4 {
+	sd0_bus4: sd0-bus-width4-pins {
 		samsung,pins = "gpk0-4", "gpk0-5", "gpk0-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_bus8: sd0-bus-width8 {
+	sd0_bus8: sd0-bus-width8-pins {
 		samsung,pins = "gpl0-0", "gpl0-1", "gpl0-2", "gpl0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_clk: sd1-clk {
+	sd1_clk: sd1-clk-pins {
 		samsung,pins = "gpk1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_cmd: sd1-cmd {
+	sd1_cmd: sd1-cmd-pins {
 		samsung,pins = "gpk1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_cd: sd1-cd {
+	sd1_cd: sd1-cd-pins {
 		samsung,pins = "gpk1-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_bus1: sd1-bus-width1 {
+	sd1_bus1: sd1-bus-width1-pins {
 		samsung,pins = "gpk1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_bus4: sd1-bus-width4 {
+	sd1_bus4: sd1-bus-width4-pins {
 		samsung,pins = "gpk1-4", "gpk1-5", "gpk1-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_clk: sd2-clk {
+	sd2_clk: sd2-clk-pins {
 		samsung,pins = "gpk2-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_cmd: sd2-cmd {
+	sd2_cmd: sd2-cmd-pins {
 		samsung,pins = "gpk2-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_cd: sd2-cd {
+	sd2_cd: sd2-cd-pins {
 		samsung,pins = "gpk2-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_bus1: sd2-bus-width1 {
+	sd2_bus1: sd2-bus-width1-pins {
 		samsung,pins = "gpk2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_bus4: sd2-bus-width4 {
+	sd2_bus4: sd2-bus-width4-pins {
 		samsung,pins = "gpk2-4", "gpk2-5", "gpk2-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	cam_port_b_io: cam-port-b-io {
+	cam_port_b_io: cam-port-b-io-pins {
 		samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
 				"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
 				"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
@@ -531,35 +506,35 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	cam_port_b_clk_active: cam-port-b-clk-active {
+	cam_port_b_clk_active: cam-port-b-clk-active-pins {
 		samsung,pins = "gpm2-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	cam_port_b_clk_idle: cam-port-b-clk-idle {
+	cam_port_b_clk_idle: cam-port-b-clk-idle-pins {
 		samsung,pins = "gpm2-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	fimc_is_i2c0: fimc-is-i2c0 {
+	fimc_is_i2c0: fimc-is-i2c0-pins {
 		samsung,pins = "gpm4-0", "gpm4-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	fimc_is_i2c1: fimc-is-i2c1 {
+	fimc_is_i2c1: fimc-is-i2c1-pins {
 		samsung,pins = "gpm4-2", "gpm4-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	fimc_is_uart: fimc-is-uart {
+	fimc_is_uart: fimc-is-uart-pins {
 		samsung,pins = "gpm3-5", "gpm3-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
index 5f7f8fedfb92..6d2c7bb19184 100644
--- a/arch/arm/boot/dts/exynos3250-rinato.dts
+++ b/arch/arm/boot/dts/exynos3250-rinato.dts
@@ -70,7 +70,7 @@
 			reg = <0x25>;
 			wakeup-source;
 
-			muic: max77836-muic {
+			extcon {
 				compatible = "maxim,max77836-muic";
 			};
 
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index a10b789d8acf..ae644315855d 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -421,7 +421,7 @@
 			status = "disabled";
 		};
 
-		pdma0: pdma@12680000 {
+		pdma0: dma-controller@12680000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12680000 0x1000>;
 			interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
@@ -432,7 +432,7 @@
 			#dma-requests = <32>;
 		};
 
-		pdma1: pdma@12690000 {
+		pdma1: dma-controller@12690000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12690000 0x1000>;
 			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index eab77a66ae8f..e81b3ee4e0f7 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -669,7 +669,7 @@
 			status = "disabled";
 		};
 
-		pdma0: pdma@12680000 {
+		pdma0: dma-controller@12680000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12680000 0x1000>;
 			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
@@ -680,7 +680,7 @@
 			#dma-requests = <32>;
 		};
 
-		pdma1: pdma@12690000 {
+		pdma1: dma-controller@12690000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12690000 0x1000>;
 			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
@@ -691,7 +691,7 @@
 			#dma-requests = <32>;
 		};
 
-		mdma1: mdma@12850000 {
+		mdma1: dma-controller@12850000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12850000 0x1000>;
 			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/exynos4210-i9100.dts b/arch/arm/boot/dts/exynos4210-i9100.dts
index 33894054b8b0..3c0a18b30837 100644
--- a/arch/arm/boot/dts/exynos4210-i9100.dts
+++ b/arch/arm/boot/dts/exynos4210-i9100.dts
@@ -672,26 +672,26 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&sleep0>;
 
-	sleep0: sleep-states {
-		gpa0-0 {
+	sleep0: sleep-state {
+		gpa0-0-pin {
 			samsung,pins = "gpa0-0";
 			samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
 			samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
 		};
 
-		gpa0-1 {
+		gpa0-1-pin {
 			samsung,pins = "gpa0-1";
 			samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT0>;
 			samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
 		};
 
-		gpa0-2 {
+		gpa0-2-pin {
 			samsung,pins = "gpa0-2";
 			samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
 			samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
 		};
 
-		gpa0-3 {
+		gpa0-3-pin {
 			samsung,pins = "gpa0-3";
 			samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>;
 			samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
@@ -700,19 +700,19 @@
 };
 
 &pinctrl_1 {
-	mhl_int: mhl-int {
+	mhl_int: mhl-int-pins {
 		samsung,pins = "gpf3-5";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	i2c_mhl_bus: i2c-mhl-bus {
+	i2c_mhl_bus: i2c-mhl-bus-pins {
 		samsung,pins = "gpf0-4", "gpf0-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	usb_sel: usb-sel {
+	usb_sel: usb-sel-pins {
 		samsung,pins = "gpl0-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -720,7 +720,7 @@
 		samsung,pin-val = <0>;
 	};
 
-	bt_en: bt-en {
+	bt_en: bt-en-pins {
 		samsung,pins = "gpl0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -728,7 +728,7 @@
 		samsung,pin-val = <0>;
 	};
 
-	bt_res: bt-res {
+	bt_res: bt-res-pins {
 		samsung,pins = "gpl1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -736,7 +736,7 @@
 		samsung,pin-val = <0>;
 	};
 
-	otg_gp: otg-gp {
+	otg_gp: otg-gp-pins {
 		samsung,pins = "gpx3-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -744,23 +744,23 @@
 		samsung,pin-val = <0>;
 	};
 
-	mag_mhl_gpio: mag-mhl {
+	mag_mhl_gpio: mag-mhl-pins {
 		samsung,pins = "gpd0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	max8997_irq: max8997-irq {
+	max8997_irq: max8997-irq-pins {
 		samsung,pins = "gpx0-7";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	max17042_fuel_irq: max17042-fuel-irq {
+	max17042_fuel_irq: max17042-fuel-irq-pins {
 		samsung,pins = "gpx2-3";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	tsp224_irq: tsp224-irq {
+	tsp224_irq: tsp224-irq-pins {
 		samsung,pins = "gpx0-4";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 	};
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index 435fda60e86d..a08ce2f37ea2 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -316,7 +316,7 @@
 };
 
 &pinctrl_1 {
-	max8997_irq: max8997-irq {
+	max8997_irq: max8997-irq-pins {
 		samsung,pins = "gpx0-3", "gpx0-4";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
index 520c5934a8d4..6373009bb727 100644
--- a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
@@ -14,7 +14,7 @@
 #include <dt-bindings/pinctrl/samsung.h>
 
 &pinctrl_0 {
-	gpa0: gpa0 {
+	gpa0: gpa0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -22,7 +22,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpa1: gpa1 {
+	gpa1: gpa1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -30,7 +30,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb: gpb {
+	gpb: gpb-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -38,7 +38,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc0: gpc0 {
+	gpc0: gpc0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -46,7 +46,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc1: gpc1 {
+	gpc1: gpc1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -54,7 +54,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd0: gpd0 {
+	gpd0: gpd0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -62,7 +62,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd1: gpd1 {
+	gpd1: gpd1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -70,7 +70,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpe0: gpe0 {
+	gpe0: gpe0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -78,7 +78,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpe1: gpe1 {
+	gpe1: gpe1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -86,7 +86,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpe2: gpe2 {
+	gpe2: gpe2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -94,7 +94,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpe3: gpe3 {
+	gpe3: gpe3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -102,7 +102,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpe4: gpe4 {
+	gpe4: gpe4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -110,7 +110,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf0: gpf0 {
+	gpf0: gpf0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -118,7 +118,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf1: gpf1 {
+	gpf1: gpf1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -126,7 +126,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf2: gpf2 {
+	gpf2: gpf2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -134,7 +134,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf3: gpf3 {
+	gpf3: gpf3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -142,112 +142,112 @@
 		#interrupt-cells = <2>;
 	};
 
-	uart0_data: uart0-data {
+	uart0_data: uart0-data-pins {
 		samsung,pins = "gpa0-0", "gpa0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart0_fctl: uart0-fctl {
+	uart0_fctl: uart0-fctl-pins {
 		samsung,pins = "gpa0-2", "gpa0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart1_data: uart1-data {
+	uart1_data: uart1-data-pins {
 		samsung,pins = "gpa0-4", "gpa0-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart1_fctl: uart1-fctl {
+	uart1_fctl: uart1-fctl-pins {
 		samsung,pins = "gpa0-6", "gpa0-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c2_bus: i2c2-bus {
+	i2c2_bus: i2c2-bus-pins {
 		samsung,pins = "gpa0-6", "gpa0-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart2_data: uart2-data {
+	uart2_data: uart2-data-pins {
 		samsung,pins = "gpa1-0", "gpa1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart2_fctl: uart2-fctl {
+	uart2_fctl: uart2-fctl-pins {
 		samsung,pins = "gpa1-2", "gpa1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart_audio_a: uart-audio-a {
+	uart_audio_a: uart-audio-a-pins {
 		samsung,pins = "gpa1-0", "gpa1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c3_bus: i2c3-bus {
+	i2c3_bus: i2c3-bus-pins {
 		samsung,pins = "gpa1-2", "gpa1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart3_data: uart3-data {
+	uart3_data: uart3-data-pins {
 		samsung,pins = "gpa1-4", "gpa1-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart_audio_b: uart-audio-b {
+	uart_audio_b: uart-audio-b-pins {
 		samsung,pins = "gpa1-4", "gpa1-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	spi0_bus: spi0-bus {
+	spi0_bus: spi0-bus-pins {
 		samsung,pins = "gpb-0", "gpb-2", "gpb-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c4_bus: i2c4-bus {
+	i2c4_bus: i2c4-bus-pins {
 		samsung,pins = "gpb-2", "gpb-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	spi1_bus: spi1-bus {
+	spi1_bus: spi1-bus-pins {
 		samsung,pins = "gpb-4", "gpb-6", "gpb-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c5_bus: i2c5-bus {
+	i2c5_bus: i2c5-bus-pins {
 		samsung,pins = "gpb-6", "gpb-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2s1_bus: i2s1-bus {
+	i2s1_bus: i2s1-bus-pins {
 		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
 				"gpc0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -255,7 +255,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pcm1_bus: pcm1-bus {
+	pcm1_bus: pcm1-bus-pins {
 		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
 				"gpc0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -263,7 +263,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	ac97_bus: ac97-bus {
+	ac97_bus: ac97-bus-pins {
 		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
 				"gpc0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
@@ -271,7 +271,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2s2_bus: i2s2-bus {
+	i2s2_bus: i2s2-bus-pins {
 		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 				"gpc1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -279,7 +279,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pcm2_bus: pcm2-bus {
+	pcm2_bus: pcm2-bus-pins {
 		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 				"gpc1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -287,105 +287,105 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	spdif_bus: spdif-bus {
+	spdif_bus: spdif-bus-pins {
 		samsung,pins = "gpc1-0", "gpc1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c6_bus: i2c6-bus {
+	i2c6_bus: i2c6-bus-pins {
 		samsung,pins = "gpc1-3", "gpc1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	spi2_bus: spi2-bus {
+	spi2_bus: spi2-bus-pins {
 		samsung,pins = "gpc1-1", "gpc1-2", "gpc1-3", "gpc1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c7_bus: i2c7-bus {
+	i2c7_bus: i2c7-bus-pins {
 		samsung,pins = "gpd0-2", "gpd0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c0_bus: i2c0-bus {
+	i2c0_bus: i2c0-bus-pins {
 		samsung,pins = "gpd1-0", "gpd1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c1_bus: i2c1-bus {
+	i2c1_bus: i2c1-bus-pins {
 		samsung,pins = "gpd1-2", "gpd1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm0_out: pwm0-out {
+	pwm0_out: pwm0-out-pins {
 		samsung,pins = "gpd0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm1_out: pwm1-out {
+	pwm1_out: pwm1-out-pins {
 		samsung,pins = "gpd0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm2_out: pwm2-out {
+	pwm2_out: pwm2-out-pins {
 		samsung,pins = "gpd0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm3_out: pwm3-out {
+	pwm3_out: pwm3-out-pins {
 		samsung,pins = "gpd0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	lcd_ctrl: lcd-ctrl {
+	lcd_ctrl: lcd-ctrl-pins {
 		samsung,pins = "gpd0-0", "gpd0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	lcd_sync: lcd-sync {
+	lcd_sync: lcd-sync-pins {
 		samsung,pins = "gpf0-0", "gpf0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	lcd_en: lcd-en {
+	lcd_en: lcd-en-pins {
 		samsung,pins = "gpe3-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	lcd_clk: lcd-clk {
+	lcd_clk: lcd-clk-pins {
 		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	lcd_data16: lcd-data-width16 {
+	lcd_data16: lcd-data-width16-pins {
 		samsung,pins = "gpf0-7", "gpf1-0", "gpf1-1", "gpf1-2",
 				"gpf1-3", "gpf1-6", "gpf1-7", "gpf2-0",
 				"gpf2-1", "gpf2-2", "gpf2-3", "gpf2-7",
@@ -395,7 +395,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	lcd_data18: lcd-data-width18 {
+	lcd_data18: lcd-data-width18-pins {
 		samsung,pins = "gpf0-6", "gpf0-7", "gpf1-0", "gpf1-1",
 				"gpf1-2", "gpf1-3", "gpf1-6", "gpf1-7",
 				"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
@@ -406,7 +406,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	lcd_data24: lcd-data-width24 {
+	lcd_data24: lcd-data-width24-pins {
 		samsung,pins = "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7",
 				"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3",
 				"gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7",
@@ -420,7 +420,7 @@
 };
 
 &pinctrl_1 {
-	gpj0: gpj0 {
+	gpj0: gpj0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -428,7 +428,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpj1: gpj1 {
+	gpj1: gpj1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -436,7 +436,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpk0: gpk0 {
+	gpk0: gpk0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -444,7 +444,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpk1: gpk1 {
+	gpk1: gpk1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -452,7 +452,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpk2: gpk2 {
+	gpk2: gpk2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -460,7 +460,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpk3: gpk3 {
+	gpk3: gpk3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -468,7 +468,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpl0: gpl0 {
+	gpl0: gpl0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -476,7 +476,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpl1: gpl1 {
+	gpl1: gpl1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -484,7 +484,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpl2: gpl2 {
+	gpl2: gpl2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -492,42 +492,42 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpy0: gpy0 {
+	gpy0: gpy0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy1: gpy1 {
+	gpy1: gpy1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy2: gpy2 {
+	gpy2: gpy2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy3: gpy3 {
+	gpy3: gpy3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy4: gpy4 {
+	gpy4: gpy4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy5: gpy5 {
+	gpy5: gpy5-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy6: gpy6 {
+	gpy6: gpy6-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpx0: gpx0 {
+	gpx0: gpx0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -544,7 +544,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx1: gpx1 {
+	gpx1: gpx1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -561,7 +561,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx2: gpx2 {
+	gpx2: gpx2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -569,7 +569,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx3: gpx3 {
+	gpx3: gpx3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -577,238 +577,238 @@
 		#interrupt-cells = <2>;
 	};
 
-	sd0_clk: sd0-clk {
+	sd0_clk: sd0-clk-pins {
 		samsung,pins = "gpk0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_cmd: sd0-cmd {
+	sd0_cmd: sd0-cmd-pins {
 		samsung,pins = "gpk0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_cd: sd0-cd {
+	sd0_cd: sd0-cd-pins {
 		samsung,pins = "gpk0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_bus1: sd0-bus-width1 {
+	sd0_bus1: sd0-bus-width1-pins {
 		samsung,pins = "gpk0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_bus4: sd0-bus-width4 {
+	sd0_bus4: sd0-bus-width4-pins {
 		samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_bus8: sd0-bus-width8 {
+	sd0_bus8: sd0-bus-width8-pins {
 		samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd4_clk: sd4-clk {
+	sd4_clk: sd4-clk-pins {
 		samsung,pins = "gpk0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd4_cmd: sd4-cmd {
+	sd4_cmd: sd4-cmd-pins {
 		samsung,pins = "gpk0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd4_cd: sd4-cd {
+	sd4_cd: sd4-cd-pins {
 		samsung,pins = "gpk0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd4_bus1: sd4-bus-width1 {
+	sd4_bus1: sd4-bus-width1-pins {
 		samsung,pins = "gpk0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd4_bus4: sd4-bus-width4 {
+	sd4_bus4: sd4-bus-width4-pins {
 		samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd4_bus8: sd4-bus-width8 {
+	sd4_bus8: sd4-bus-width8-pins {
 		samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_clk: sd1-clk {
+	sd1_clk: sd1-clk-pins {
 		samsung,pins = "gpk1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_cmd: sd1-cmd {
+	sd1_cmd: sd1-cmd-pins {
 		samsung,pins = "gpk1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_cd: sd1-cd {
+	sd1_cd: sd1-cd-pins {
 		samsung,pins = "gpk1-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_bus1: sd1-bus-width1 {
+	sd1_bus1: sd1-bus-width1-pins {
 		samsung,pins = "gpk1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_bus4: sd1-bus-width4 {
+	sd1_bus4: sd1-bus-width4-pins {
 		samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_clk: sd2-clk {
+	sd2_clk: sd2-clk-pins {
 		samsung,pins = "gpk2-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_cmd: sd2-cmd {
+	sd2_cmd: sd2-cmd-pins {
 		samsung,pins = "gpk2-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_cd: sd2-cd {
+	sd2_cd: sd2-cd-pins {
 		samsung,pins = "gpk2-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_bus1: sd2-bus-width1 {
+	sd2_bus1: sd2-bus-width1-pins {
 		samsung,pins = "gpk2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_bus4: sd2-bus-width4 {
+	sd2_bus4: sd2-bus-width4-pins {
 		samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_bus8: sd2-bus-width8 {
+	sd2_bus8: sd2-bus-width8-pins {
 		samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd3_clk: sd3-clk {
+	sd3_clk: sd3-clk-pins {
 		samsung,pins = "gpk3-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd3_cmd: sd3-cmd {
+	sd3_cmd: sd3-cmd-pins {
 		samsung,pins = "gpk3-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd3_cd: sd3-cd {
+	sd3_cd: sd3-cd-pins {
 		samsung,pins = "gpk3-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd3_bus1: sd3-bus-width1 {
+	sd3_bus1: sd3-bus-width1-pins {
 		samsung,pins = "gpk3-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd3_bus4: sd3-bus-width4 {
+	sd3_bus4: sd3-bus-width4-pins {
 		samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	eint0: ext-int0 {
+	eint0: ext-int0-pins {
 		samsung,pins = "gpx0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	eint8: ext-int8 {
+	eint8: ext-int8-pins {
 		samsung,pins = "gpx1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	eint15: ext-int15 {
+	eint15: ext-int15-pins {
 		samsung,pins = "gpx1-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	eint16: ext-int16 {
+	eint16: ext-int16-pins {
 		samsung,pins = "gpx2-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	eint31: ext-int31 {
+	eint31: ext-int31-pins {
 		samsung,pins = "gpx3-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	cam_port_a_io: cam-port-a-io {
+	cam_port_a_io: cam-port-a-io-pins {
 		samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
 				"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
 				"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
@@ -817,21 +817,21 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	cam_port_a_clk_active: cam-port-a-clk-active {
+	cam_port_a_clk_active: cam-port-a-clk-active-pins {
 		samsung,pins = "gpj1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	cam_port_a_clk_idle: cam-port-a-clk-idle {
+	cam_port_a_clk_idle: cam-port-a-clk-idle-pins {
 		samsung,pins = "gpj1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	hdmi_cec: hdmi-cec {
+	hdmi_cec: hdmi-cec-pins {
 		samsung,pins = "gpx3-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -840,12 +840,12 @@
 };
 
 &pinctrl_2 {
-	gpz: gpz {
+	gpz: gpz-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	i2s0_bus: i2s0-bus {
+	i2s0_bus: i2s0-bus-pins {
 		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
 				"gpz-4", "gpz-5", "gpz-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -853,7 +853,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pcm0_bus: pcm0-bus {
+	pcm0_bus: pcm0-bus-pins {
 		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
 				"gpz-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts
index d5797a67bf48..a5dfd7fd49b3 100644
--- a/arch/arm/boot/dts/exynos4210-smdkv310.dts
+++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
@@ -152,14 +152,14 @@
 };
 
 &pinctrl_1 {
-	keypad_rows: keypad-rows {
+	keypad_rows: keypad-rows-pins {
 		samsung,pins = "gpx2-0", "gpx2-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	keypad_cols: keypad-cols {
+	keypad_cols: keypad-cols-pins {
 		samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3",
 			       "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index 9c4ff7521348..01f44d95f671 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -464,19 +464,19 @@
 };
 
 &pinctrl_1 {
-	bt_shutdown: bt-shutdown {
+	bt_shutdown: bt-shutdown-pins {
 		samsung,pins = "gpl1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	bt_host_wakeup: bt-host-wakeup {
+	bt_host_wakeup: bt-host-wakeup-pins {
 		samsung,pins = "gpx2-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	bt_device_wakeup: bt-device-wakeup {
+	bt_device_wakeup: bt-device-wakeup-pins {
 		samsung,pins = "gpx3-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
index 9f93e7464aed..138d606d58a5 100644
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -533,37 +533,37 @@
 };
 
 &pinctrl_1 {
-	bt_shutdown: bt-shutdown {
+	bt_shutdown: bt-shutdown-pins {
 		samsung,pins = "gpe1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	bt_host_wakeup: bt-host-wakeup {
+	bt_host_wakeup: bt-host-wakeup-pins {
 		samsung,pins = "gpx2-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	bt_device_wakeup: bt-device-wakeup {
+	bt_device_wakeup: bt-device-wakeup-pins {
 		samsung,pins = "gpx3-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	lp3974_irq: lp3974-irq {
+	lp3974_irq: lp3974-irq-pins {
 		samsung,pins = "gpx0-7", "gpx2-7";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	hdmi_hpd: hdmi-hpd {
+	hdmi_hpd: hdmi-hpd-pins {
 		samsung,pins = "gpx3-7";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 };
 
 &pinctrl_0 {
-	i2c_ddc_bus: i2c-ddc-bus {
+	i2c_ddc_bus: i2c-ddc-bus-pins {
 		samsung,pins = "gpe4-2", "gpe4-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
@@ -659,7 +659,7 @@
 };
 
 &soc {
-	mdma0: mdma@12840000 {
+	mdma0: dma-controller@12840000 {
 		compatible = "arm,pl330", "arm,primecell";
 		reg = <0x12840000 0x1000>;
 		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index 7e7d65ce6585..2c25cc37934e 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -527,8 +527,6 @@
 	compatible = "samsung,exynos4210-tmu";
 	clocks = <&clock CLK_TMU_APBIF>;
 	clock-names = "tmu_apbif";
-	samsung,tmu_gain = <15>;
-	samsung,tmu_reference_voltage = <7>;
 };
 
 #include "exynos4210-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
index c14e37dc3a9b..03dffc690b79 100644
--- a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
+++ b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
@@ -151,13 +151,13 @@
 };
 
 &pinctrl_0 {
-	camera_flash_host: camera-flash-host {
+	camera_flash_host: camera-flash-host-pins {
 		samsung,pins = "gpj1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-val = <0>;
 	};
 
-	camera_flash_isp: camera-flash-isp {
+	camera_flash_isp: camera-flash-isp-pins {
 		samsung,pins = "gpj1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-val = <1>;
diff --git a/arch/arm/boot/dts/exynos4412-itop-elite.dts b/arch/arm/boot/dts/exynos4412-itop-elite.dts
index 47431307cb3c..a9406280b979 100644
--- a/arch/arm/boot/dts/exynos4412-itop-elite.dts
+++ b/arch/arm/boot/dts/exynos4412-itop-elite.dts
@@ -192,7 +192,7 @@
 };
 
 &pinctrl_1 {
-	ether-reset {
+	ether-reset-pins {
 		samsung,pins = "gpc0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
diff --git a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
index b3726d4d7d93..a67cb61e3cbb 100644
--- a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
+++ b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
@@ -484,7 +484,7 @@
 };
 
 &pinctrl_1 {
-	hsic_reset: hsic-reset {
+	hsic_reset: hsic-reset-pins {
 		samsung,pins = "gpm2-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi
index 968c7943653e..23f50c9be527 100644
--- a/arch/arm/boot/dts/exynos4412-midas.dtsi
+++ b/arch/arm/boot/dts/exynos4412-midas.dtsi
@@ -987,19 +987,19 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&sleep0>;
 
-	mhl_int: mhl-int {
+	mhl_int: mhl-int-pins {
 		samsung,pins = "gpf3-5";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	i2c_mhl_bus: i2c-mhl-bus {
+	i2c_mhl_bus: i2c-mhl-bus-pins {
 		samsung,pins = "gpf0-4", "gpf0-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	sleep0: sleep-states {
+	sleep0: sleep-state {
 		PIN_SLP(gpa0-0, INPUT, NONE);
 		PIN_SLP(gpa0-1, OUT0, NONE);
 		PIN_SLP(gpa0-2, INPUT, NONE);
@@ -1102,52 +1102,52 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&sleep1>;
 
-	gpio_keys: gpio-keys {
+	gpio_keys: gpio-keys-pins {
 		samsung,pins = "gpx0-1", "gpx2-2", "gpx2-7", "gpx3-3";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	bt_shutdown: bt-shutdown {
+	bt_shutdown: bt-shutdown-pins {
 		samsung,pins = "gpl0-6";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	bt_host_wakeup: bt-host-wakeup {
+	bt_host_wakeup: bt-host-wakeup-pins {
 		samsung,pins = "gpx2-6";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	bt_device_wakeup: bt-device-wakeup {
+	bt_device_wakeup: bt-device-wakeup-pins {
 		samsung,pins = "gpx3-1";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	max77686_irq: max77686-irq {
+	max77686_irq: max77686-irq-pins {
 		samsung,pins = "gpx0-7";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	max77693_irq: max77693-irq {
+	max77693_irq: max77693-irq-pins {
 		samsung,pins = "gpx1-5";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	max77693_fuel_irq: max77693-fuel-irq {
+	max77693_fuel_irq: max77693-fuel-irq-pins {
 		samsung,pins = "gpx2-3";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	sdhci2_cd: sdhci2-cd-irq {
+	sdhci2_cd: sdhci2-cd-irq-pins {
 		samsung,pins = "gpx3-4";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	hdmi_hpd: hdmi-hpd {
+	hdmi_hpd: hdmi-hpd-pins {
 		samsung,pins = "gpx3-7";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 	};
 
-	sleep1: sleep-states {
+	sleep1: sleep-state {
 		PIN_SLP(gpk0-0, PREV, NONE);
 		PIN_SLP(gpk0-1, PREV, NONE);
 		PIN_SLP(gpk0-2, OUT0, NONE);
@@ -1300,7 +1300,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&sleep2>;
 
-	sleep2: sleep-states {
+	sleep2: sleep-state {
 		PIN_SLP(gpz-0, INPUT, DOWN);
 		PIN_SLP(gpz-1, INPUT, DOWN);
 		PIN_SLP(gpz-2, INPUT, DOWN);
@@ -1315,7 +1315,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&sleep3>;
 
-	sleep3: sleep-states {
+	sleep3: sleep-state {
 		PIN_SLP(gpv0-0, INPUT, DOWN);
 		PIN_SLP(gpv0-1, INPUT, DOWN);
 		PIN_SLP(gpv0-2, INPUT, DOWN);
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index 5b1d4591b35c..e7669b9e9edb 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -172,24 +172,24 @@
 };
 
 &pinctrl_1 {
-	gpio_power_key: power-key {
+	gpio_power_key: power-key-pins {
 		samsung,pins = "gpx1-3";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	max77686_irq: max77686-irq {
+	max77686_irq: max77686-irq-pins {
 		samsung,pins = "gpx3-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	hdmi_hpd: hdmi-hpd {
+	hdmi_hpd: hdmi-hpd-pins {
 		samsung,pins = "gpx3-7";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 	};
 
-	emmc_rstn: emmc-rstn {
+	emmc_rstn: emmc-rstn-pins {
 		samsung,pins = "gpk1-2";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
index 440135d0ff2a..a9fada51eb50 100644
--- a/arch/arm/boot/dts/exynos4412-odroidx.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
@@ -112,7 +112,7 @@
 };
 
 &pinctrl_1 {
-	gpio_home_key: home-key {
+	gpio_home_key: home-key-pins {
 		samsung,pins = "gpx2-2";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
index e6aec5facabf..6db09dba07ff 100644
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -506,14 +506,14 @@
 };
 
 &pinctrl_1 {
-	keypad_rows: keypad-rows {
+	keypad_rows: keypad-rows-pins {
 		samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	keypad_cols: keypad-cols {
+	keypad_cols: keypad-cols-pins {
 		samsung,pins = "gpx1-0", "gpx1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
diff --git a/arch/arm/boot/dts/exynos4412-p4note.dtsi b/arch/arm/boot/dts/exynos4412-p4note.dtsi
index 22c3086e0076..97f131b1014b 100644
--- a/arch/arm/boot/dts/exynos4412-p4note.dtsi
+++ b/arch/arm/boot/dts/exynos4412-p4note.dtsi
@@ -16,6 +16,7 @@
 #include <dt-bindings/input/linux-event-codes.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/samsung.h>
+#include <dt-bindings/power/summit,smb347-charger.h>
 
 / {
 	compatible = "samsung,p4note", "samsung,exynos4412", "samsung,exynos4";
@@ -114,6 +115,17 @@
 		clock-names = "ext_clock";
 	};
 
+	battery_cell: battery-cell {
+		compatible = "simple-battery";
+		device-chemistry = "lithium-ion";
+		constant-charge-current-max-microamp = <2200000>;
+		precharge-current-microamp = <250000>;
+		charge-term-current-microamp = <250000>;
+		constant-charge-voltage-max-microvolt = <4200000>;
+
+		power-supplies = <&power_supply>;
+	};
+
 	i2c-gpio-1 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpy2 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -182,6 +194,28 @@
 			};
 		};
 	};
+
+	i2c-gpio-4 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpm2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpm2 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		power_supply: charger@6 {
+			compatible = "summit,smb347";
+			reg = <0x6>;
+			summit,enable-usb-charging;
+			summit,enable-charge-control = <SMB3XX_CHG_ENABLE_SW>;
+			summit,fast-voltage-threshold-microvolt = <2600000>;
+			summit,chip-temperature-threshold-celsius = <130>;
+			summit,usb-current-limit-microamp = <1800000>;
+
+			monitored-battery = <&battery_cell>;
+		};
+	};
 };
 
 &adc {
@@ -641,19 +675,19 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&sleep0>;
 
-	tsp_reg_gpio_2: tsp-reg-gpio-2 {
+	tsp_reg_gpio_2: tsp-reg-gpio-2-pins {
 		samsung,pins = "gpb-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	tsp_reg_gpio_3: tsp-reg-gpio-3 {
+	tsp_reg_gpio_3: tsp-reg-gpio-3-pins {
 		samsung,pins = "gpb-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	sleep0: sleep-states {
+	sleep0: sleep-state {
 		PIN_SLP(gpa0-0, INPUT, NONE);
 		PIN_SLP(gpa0-1, OUT0, NONE);
 		PIN_SLP(gpa0-2, INPUT, NONE);
@@ -755,19 +789,19 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&sleep1>;
 
-	sd3_wifi: sd3-wifi {
+	sd3_wifi: sd3-wifi-pins {
 		samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	bt_shutdown: bt-shutdown {
+	bt_shutdown: bt-shutdown-pins {
 		samsung,pins = "gpl0-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	uart_sel: uart-sel {
+	uart_sel: uart-sel-pins {
 		samsung,pins = "gpl2-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -775,82 +809,82 @@
 		/* 0 = CP, 1 = AP (serial output) */
 	};
 
-	tsp_rst: tsp-rst {
+	tsp_rst: tsp-rst-pins {
 		samsung,pins = "gpm0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	tsp_irq: tsp-irq {
+	tsp_irq: tsp-irq-pins {
 		samsung,pins = "gpm2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	wifi_reset: wifi-reset {
+	wifi_reset: wifi-reset-pins {
 		samsung,pins = "gpm3-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	tsp_reg_gpio_1: tsp-reg-gpio-1 {
+	tsp_reg_gpio_1: tsp-reg-gpio-1-pins {
 		samsung,pins = "gpm4-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	ak8975_irq: ak8975-irq {
+	ak8975_irq: ak8975-irq-pins {
 		samsung,pins = "gpm4-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 	};
 
-	stmpe_adc_irq: stmpe-adc-irq {
+	stmpe_adc_irq: stmpe-adc-irq-pins {
 		samsung,pins = "gpx0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	max77686_irq: max77686-irq {
+	max77686_irq: max77686-irq-pins {
 		samsung,pins = "gpx0-7";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	gpio_keys: gpio-keys {
+	gpio_keys: gpio-keys-pins {
 		samsung,pins = "gpx2-2", "gpx2-7", "gpx3-3";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	fuel_alert_irq: fuel-alert-irq {
+	fuel_alert_irq: fuel-alert-irq-pins {
 		samsung,pins = "gpx2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	wifi_host_wake: wifi-host-wake {
+	wifi_host_wake: wifi-host-wake-pins {
 		samsung,pins = "gpx2-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 	};
 
-	bt_host_wakeup: bt-host-wakeup {
+	bt_host_wakeup: bt-host-wakeup-pins {
 		samsung,pins = "gpx2-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	bt_device_wakeup: bt-device-wakeup {
+	bt_device_wakeup: bt-device-wakeup-pins {
 		samsung,pins = "gpx3-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	sdhci2_cd: sdhci2-cd {
+	sdhci2_cd: sdhci2-cd-pins {
 		samsung,pins = "gpx3-4";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	sleep1: sleep-states {
+	sleep1: sleep-state {
 		PIN_SLP(gpk0-0, PREV, NONE);
 		PIN_SLP(gpk0-1, PREV, NONE);
 		PIN_SLP(gpk0-2, PREV, NONE);
@@ -1004,7 +1038,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&sleep2>;
 
-	sleep2: sleep-states {
+	sleep2: sleep-state {
 		PIN_SLP(gpz-0, INPUT, DOWN);
 		PIN_SLP(gpz-1, INPUT, DOWN);
 		PIN_SLP(gpz-2, INPUT, DOWN);
@@ -1019,7 +1053,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&sleep3>;
 
-	sleep3: sleep-states {
+	sleep3: sleep-state {
 		PIN_SLP(gpv0-0, INPUT, DOWN);
 		PIN_SLP(gpv0-1, INPUT, DOWN);
 		PIN_SLP(gpv0-2, INPUT, DOWN);
diff --git a/arch/arm/boot/dts/exynos4412-pinctrl.dtsi b/arch/arm/boot/dts/exynos4412-pinctrl.dtsi
index d7d5fdc230d8..88b8afd55664 100644
--- a/arch/arm/boot/dts/exynos4412-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4412-pinctrl.dtsi
@@ -19,7 +19,7 @@
 	}
 
 &pinctrl_0 {
-	gpa0: gpa0 {
+	gpa0: gpa0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -27,7 +27,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpa1: gpa1 {
+	gpa1: gpa1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -35,7 +35,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb: gpb {
+	gpb: gpb-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -43,7 +43,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc0: gpc0 {
+	gpc0: gpc0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -51,7 +51,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc1: gpc1 {
+	gpc1: gpc1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -59,7 +59,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd0: gpd0 {
+	gpd0: gpd0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -67,7 +67,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd1: gpd1 {
+	gpd1: gpd1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -75,7 +75,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf0: gpf0 {
+	gpf0: gpf0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -83,7 +83,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf1: gpf1 {
+	gpf1: gpf1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -91,7 +91,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf2: gpf2 {
+	gpf2: gpf2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -99,7 +99,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf3: gpf3 {
+	gpf3: gpf3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -107,7 +107,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpj0: gpj0 {
+	gpj0: gpj0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -115,7 +115,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpj1: gpj1 {
+	gpj1: gpj1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -123,112 +123,112 @@
 		#interrupt-cells = <2>;
 	};
 
-	uart0_data: uart0-data {
+	uart0_data: uart0-data-pins {
 		samsung,pins = "gpa0-0", "gpa0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart0_fctl: uart0-fctl {
+	uart0_fctl: uart0-fctl-pins {
 		samsung,pins = "gpa0-2", "gpa0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart1_data: uart1-data {
+	uart1_data: uart1-data-pins {
 		samsung,pins = "gpa0-4", "gpa0-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart1_fctl: uart1-fctl {
+	uart1_fctl: uart1-fctl-pins {
 		samsung,pins = "gpa0-6", "gpa0-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c2_bus: i2c2-bus {
+	i2c2_bus: i2c2-bus-pins {
 		samsung,pins = "gpa0-6", "gpa0-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart2_data: uart2-data {
+	uart2_data: uart2-data-pins {
 		samsung,pins = "gpa1-0", "gpa1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart2_fctl: uart2-fctl {
+	uart2_fctl: uart2-fctl-pins {
 		samsung,pins = "gpa1-2", "gpa1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart_audio_a: uart-audio-a {
+	uart_audio_a: uart-audio-a-pins {
 		samsung,pins = "gpa1-0", "gpa1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c3_bus: i2c3-bus {
+	i2c3_bus: i2c3-bus-pins {
 		samsung,pins = "gpa1-2", "gpa1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart3_data: uart3-data {
+	uart3_data: uart3-data-pins {
 		samsung,pins = "gpa1-4", "gpa1-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart_audio_b: uart-audio-b {
+	uart_audio_b: uart-audio-b-pins {
 		samsung,pins = "gpa1-4", "gpa1-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	spi0_bus: spi0-bus {
+	spi0_bus: spi0-bus-pins {
 		samsung,pins = "gpb-0", "gpb-2", "gpb-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c4_bus: i2c4-bus {
+	i2c4_bus: i2c4-bus-pins {
 		samsung,pins = "gpb-0", "gpb-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	spi1_bus: spi1-bus {
+	spi1_bus: spi1-bus-pins {
 		samsung,pins = "gpb-4", "gpb-6", "gpb-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c5_bus: i2c5-bus {
+	i2c5_bus: i2c5-bus-pins {
 		samsung,pins = "gpb-2", "gpb-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2s1_bus: i2s1-bus {
+	i2s1_bus: i2s1-bus-pins {
 		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
 				"gpc0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -236,7 +236,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pcm1_bus: pcm1-bus {
+	pcm1_bus: pcm1-bus-pins {
 		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
 				"gpc0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -244,7 +244,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	ac97_bus: ac97-bus {
+	ac97_bus: ac97-bus-pins {
 		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
 				"gpc0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
@@ -252,7 +252,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2s2_bus: i2s2-bus {
+	i2s2_bus: i2s2-bus-pins {
 		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 				"gpc1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -260,7 +260,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pcm2_bus: pcm2-bus {
+	pcm2_bus: pcm2-bus-pins {
 		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 				"gpc1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -268,105 +268,105 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	spdif_bus: spdif-bus {
+	spdif_bus: spdif-bus-pins {
 		samsung,pins = "gpc1-0", "gpc1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c6_bus: i2c6-bus {
+	i2c6_bus: i2c6-bus-pins {
 		samsung,pins = "gpc1-3", "gpc1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	spi2_bus: spi2-bus {
+	spi2_bus: spi2-bus-pins {
 		samsung,pins = "gpc1-1", "gpc1-3", "gpc1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm0_out: pwm0-out {
+	pwm0_out: pwm0-out-pins {
 		samsung,pins = "gpd0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm1_out: pwm1-out {
+	pwm1_out: pwm1-out-pins {
 		samsung,pins = "gpd0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	lcd_ctrl: lcd-ctrl {
+	lcd_ctrl: lcd-ctrl-pins {
 		samsung,pins = "gpd0-0", "gpd0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c7_bus: i2c7-bus {
+	i2c7_bus: i2c7-bus-pins {
 		samsung,pins = "gpd0-2", "gpd0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm2_out: pwm2-out {
+	pwm2_out: pwm2-out-pins {
 		samsung,pins = "gpd0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm3_out: pwm3-out {
+	pwm3_out: pwm3-out-pins {
 		samsung,pins = "gpd0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c0_bus: i2c0-bus {
+	i2c0_bus: i2c0-bus-pins {
 		samsung,pins = "gpd1-0", "gpd1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	mipi0_clk: mipi0-clk {
+	mipi0_clk: mipi0-clk-pins {
 		samsung,pins = "gpd1-0", "gpd1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c1_bus: i2c1-bus {
+	i2c1_bus: i2c1-bus-pins {
 		samsung,pins = "gpd1-2", "gpd1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	mipi1_clk: mipi1-clk {
+	mipi1_clk: mipi1-clk-pins {
 		samsung,pins = "gpd1-2", "gpd1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	lcd_clk: lcd-clk {
+	lcd_clk: lcd-clk-pins {
 		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	lcd_data16: lcd-data-width16 {
+	lcd_data16: lcd-data-width16-pins {
 		samsung,pins = "gpf0-7", "gpf1-0", "gpf1-1", "gpf1-2",
 				"gpf1-3", "gpf1-6", "gpf1-7", "gpf2-0",
 				"gpf2-1", "gpf2-2", "gpf2-3", "gpf2-7",
@@ -376,7 +376,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	lcd_data18: lcd-data-width18 {
+	lcd_data18: lcd-data-width18-pins {
 		samsung,pins = "gpf0-6", "gpf0-7", "gpf1-0", "gpf1-1",
 				"gpf1-2", "gpf1-3", "gpf1-6", "gpf1-7",
 				"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
@@ -387,7 +387,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	lcd_data24: lcd-data-width24 {
+	lcd_data24: lcd-data-width24-pins {
 		samsung,pins = "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7",
 				"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3",
 				"gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7",
@@ -399,14 +399,14 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	lcd_ldi: lcd-ldi {
+	lcd_ldi: lcd-ldi-pins {
 		samsung,pins = "gpf3-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	cam_port_a_io: cam-port-a-io {
+	cam_port_a_io: cam-port-a-io-pins {
 		samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
 				"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
 				"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
@@ -415,14 +415,14 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	cam_port_a_clk_active: cam-port-a-clk-active {
+	cam_port_a_clk_active: cam-port-a-clk-active-pins {
 		samsung,pins = "gpj1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	cam_port_a_clk_idle: cam-port-a-clk-idle {
+	cam_port_a_clk_idle: cam-port-a-clk-idle-pins {
 		samsung,pins = "gpj1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
@@ -431,7 +431,7 @@
 };
 
 &pinctrl_1 {
-	gpk0: gpk0 {
+	gpk0: gpk0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -439,7 +439,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpk1: gpk1 {
+	gpk1: gpk1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -447,7 +447,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpk2: gpk2 {
+	gpk2: gpk2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -455,7 +455,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpk3: gpk3 {
+	gpk3: gpk3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -463,7 +463,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpl0: gpl0 {
+	gpl0: gpl0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -471,7 +471,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpl1: gpl1 {
+	gpl1: gpl1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -479,7 +479,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpl2: gpl2 {
+	gpl2: gpl2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -487,7 +487,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpm0: gpm0 {
+	gpm0: gpm0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -495,7 +495,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpm1: gpm1 {
+	gpm1: gpm1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -503,7 +503,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpm2: gpm2 {
+	gpm2: gpm2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -511,7 +511,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpm3: gpm3 {
+	gpm3: gpm3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -519,7 +519,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpm4: gpm4 {
+	gpm4: gpm4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -527,42 +527,42 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpy0: gpy0 {
+	gpy0: gpy0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy1: gpy1 {
+	gpy1: gpy1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy2: gpy2 {
+	gpy2: gpy2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy3: gpy3 {
+	gpy3: gpy3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy4: gpy4 {
+	gpy4: gpy4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy5: gpy5 {
+	gpy5: gpy5-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy6: gpy6 {
+	gpy6: gpy6-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpx0: gpx0 {
+	gpx0: gpx0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -579,7 +579,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx1: gpx1 {
+	gpx1: gpx1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -596,7 +596,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx2: gpx2 {
+	gpx2: gpx2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -604,7 +604,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx3: gpx3 {
+	gpx3: gpx3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -612,203 +612,203 @@
 		#interrupt-cells = <2>;
 	};
 
-	sd0_clk: sd0-clk {
+	sd0_clk: sd0-clk-pins {
 		samsung,pins = "gpk0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_cmd: sd0-cmd {
+	sd0_cmd: sd0-cmd-pins {
 		samsung,pins = "gpk0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_cd: sd0-cd {
+	sd0_cd: sd0-cd-pins {
 		samsung,pins = "gpk0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_bus1: sd0-bus-width1 {
+	sd0_bus1: sd0-bus-width1-pins {
 		samsung,pins = "gpk0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_bus4: sd0-bus-width4 {
+	sd0_bus4: sd0-bus-width4-pins {
 		samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_bus8: sd0-bus-width8 {
+	sd0_bus8: sd0-bus-width8-pins {
 		samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd4_clk: sd4-clk {
+	sd4_clk: sd4-clk-pins {
 		samsung,pins = "gpk0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd4_cmd: sd4-cmd {
+	sd4_cmd: sd4-cmd-pins {
 		samsung,pins = "gpk0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd4_cd: sd4-cd {
+	sd4_cd: sd4-cd-pins {
 		samsung,pins = "gpk0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd4_bus1: sd4-bus-width1 {
+	sd4_bus1: sd4-bus-width1-pins {
 		samsung,pins = "gpk0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd4_bus4: sd4-bus-width4 {
+	sd4_bus4: sd4-bus-width4-pins {
 		samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd4_bus8: sd4-bus-width8 {
+	sd4_bus8: sd4-bus-width8-pins {
 		samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_clk: sd1-clk {
+	sd1_clk: sd1-clk-pins {
 		samsung,pins = "gpk1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_cmd: sd1-cmd {
+	sd1_cmd: sd1-cmd-pins {
 		samsung,pins = "gpk1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_cd: sd1-cd {
+	sd1_cd: sd1-cd-pins {
 		samsung,pins = "gpk1-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_bus1: sd1-bus-width1 {
+	sd1_bus1: sd1-bus-width1-pins {
 		samsung,pins = "gpk1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_bus4: sd1-bus-width4 {
+	sd1_bus4: sd1-bus-width4-pins {
 		samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_clk: sd2-clk {
+	sd2_clk: sd2-clk-pins {
 		samsung,pins = "gpk2-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_cmd: sd2-cmd {
+	sd2_cmd: sd2-cmd-pins {
 		samsung,pins = "gpk2-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_cd: sd2-cd {
+	sd2_cd: sd2-cd-pins {
 		samsung,pins = "gpk2-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_bus1: sd2-bus-width1 {
+	sd2_bus1: sd2-bus-width1-pins {
 		samsung,pins = "gpk2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_bus4: sd2-bus-width4 {
+	sd2_bus4: sd2-bus-width4-pins {
 		samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_bus8: sd2-bus-width8 {
+	sd2_bus8: sd2-bus-width8-pins {
 		samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd3_clk: sd3-clk {
+	sd3_clk: sd3-clk-pins {
 		samsung,pins = "gpk3-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd3_cmd: sd3-cmd {
+	sd3_cmd: sd3-cmd-pins {
 		samsung,pins = "gpk3-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd3_cd: sd3-cd {
+	sd3_cd: sd3-cd-pins {
 		samsung,pins = "gpk3-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd3_bus1: sd3-bus-width1 {
+	sd3_bus1: sd3-bus-width1-pins {
 		samsung,pins = "gpk3-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd3_bus4: sd3-bus-width4 {
+	sd3_bus4: sd3-bus-width4-pins {
 		samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	cam_port_b_io: cam-port-b-io {
+	cam_port_b_io: cam-port-b-io-pins {
 		samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
 				"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
 				"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
@@ -817,77 +817,77 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	cam_port_b_clk_active: cam-port-b-clk-active {
+	cam_port_b_clk_active: cam-port-b-clk-active-pins {
 		samsung,pins = "gpm2-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	cam_port_b_clk_idle: cam-port-b-clk-idle {
+	cam_port_b_clk_idle: cam-port-b-clk-idle-pins {
 		samsung,pins = "gpm2-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	eint0: ext-int0 {
+	eint0: ext-int0-pins {
 		samsung,pins = "gpx0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	eint8: ext-int8 {
+	eint8: ext-int8-pins {
 		samsung,pins = "gpx1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	eint15: ext-int15 {
+	eint15: ext-int15-pins {
 		samsung,pins = "gpx1-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	eint16: ext-int16 {
+	eint16: ext-int16-pins {
 		samsung,pins = "gpx2-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	eint31: ext-int31 {
+	eint31: ext-int31-pins {
 		samsung,pins = "gpx3-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	fimc_is_i2c0: fimc-is-i2c0 {
+	fimc_is_i2c0: fimc-is-i2c0-pins {
 		samsung,pins = "gpm4-0", "gpm4-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	fimc_is_i2c1: fimc-is-i2c1 {
+	fimc_is_i2c1: fimc-is-i2c1-pins {
 		samsung,pins = "gpm4-2", "gpm4-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	fimc_is_uart: fimc-is-uart {
+	fimc_is_uart: fimc-is-uart-pins {
 		samsung,pins = "gpm3-5", "gpm3-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	hdmi_cec: hdmi-cec {
+	hdmi_cec: hdmi-cec-pins {
 		samsung,pins = "gpx3-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -896,7 +896,7 @@
 };
 
 &pinctrl_2 {
-	gpz: gpz {
+	gpz: gpz-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -904,7 +904,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	i2s0_bus: i2s0-bus {
+	i2s0_bus: i2s0-bus-pins {
 		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
 				"gpz-4", "gpz-5", "gpz-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -912,7 +912,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pcm0_bus: pcm0-bus {
+	pcm0_bus: pcm0-bus-pins {
 		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
 				"gpz-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -922,7 +922,7 @@
 };
 
 &pinctrl_3 {
-	gpv0: gpv0 {
+	gpv0: gpv0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -930,7 +930,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpv1: gpv1 {
+	gpv1: gpv1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -938,7 +938,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpv2: gpv2 {
+	gpv2: gpv2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -946,7 +946,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpv3: gpv3 {
+	gpv3: gpv3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -954,7 +954,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpv4: gpv4 {
+	gpv4: gpv4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -962,7 +962,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	c2c_bus: c2c-bus {
+	c2c_bus: c2c-bus-pins {
 		samsung,pins = "gpv0-0", "gpv0-1", "gpv0-2", "gpv0-3",
 				"gpv0-4", "gpv0-5", "gpv0-6", "gpv0-7",
 				"gpv1-0", "gpv1-1", "gpv1-2", "gpv1-3",
diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts
index cc99b955af0c..a40ff394977c 100644
--- a/arch/arm/boot/dts/exynos4412-smdk4412.dts
+++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts
@@ -133,14 +133,14 @@
 };
 
 &pinctrl_1 {
-	keypad_rows: keypad-rows {
+	keypad_rows: keypad-rows-pins {
 		samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	keypad_cols: keypad-cols {
+	keypad_cols: keypad-cols-pins {
 		samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3",
 			       "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index d3802046c8b8..aa0b61b59970 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -813,7 +813,7 @@
 	interrupt-parent = <&combiner>;
 	interrupts = <2 4>;
 	reg = <0x100C0000 0x100>;
-	clocks = <&clock 383>;
+	clocks = <&clock CLK_TMU_APBIF>;
 	clock-names = "tmu_apbif";
 	status = "disabled";
 };
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index 3583095fbb2a..f7795f2d0f0e 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -590,7 +590,7 @@
 };
 
 &pinctrl_0 {
-	s5m8767_irq: s5m8767-irq {
+	s5m8767_irq: s5m8767-irq-pins {
 		samsung,pins = "gpx3-2";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
@@ -632,3 +632,8 @@
 		#size-cells = <0>;
 	};
 };
+
+&usbdrd {
+	vdd10-supply = <&ldo15_reg>;
+	vdd33-supply = <&ldo12_reg>;
+};
diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
index d31a68672bfa..918947a3897e 100644
--- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
@@ -12,7 +12,7 @@
 #include <dt-bindings/pinctrl/samsung.h>
 
 &pinctrl_0 {
-	gpa0: gpa0 {
+	gpa0: gpa0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -20,7 +20,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpa1: gpa1 {
+	gpa1: gpa1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -28,7 +28,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpa2: gpa2 {
+	gpa2: gpa2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -36,7 +36,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb0: gpb0 {
+	gpb0: gpb0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -44,7 +44,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb1: gpb1 {
+	gpb1: gpb1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -52,7 +52,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb2: gpb2 {
+	gpb2: gpb2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -60,7 +60,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb3: gpb3 {
+	gpb3: gpb3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -68,7 +68,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc0: gpc0 {
+	gpc0: gpc0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -76,7 +76,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc1: gpc1 {
+	gpc1: gpc1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -84,7 +84,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc2: gpc2 {
+	gpc2: gpc2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -92,7 +92,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc3: gpc3 {
+	gpc3: gpc3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -100,7 +100,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd0: gpd0 {
+	gpd0: gpd0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -108,7 +108,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd1: gpd1 {
+	gpd1: gpd1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -116,42 +116,42 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpy0: gpy0 {
+	gpy0: gpy0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy1: gpy1 {
+	gpy1: gpy1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy2: gpy2 {
+	gpy2: gpy2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy3: gpy3 {
+	gpy3: gpy3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy4: gpy4 {
+	gpy4: gpy4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy5: gpy5 {
+	gpy5: gpy5-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy6: gpy6 {
+	gpy6: gpy6-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpc4: gpc4 {
+	gpc4: gpc4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -159,7 +159,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx0: gpx0 {
+	gpx0: gpx0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -170,7 +170,7 @@
 			     <26 0>, <26 1>, <27 0>, <27 1>;
 	};
 
-	gpx1: gpx1 {
+	gpx1: gpx1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -181,7 +181,7 @@
 			     <30 0>, <30 1>, <31 0>, <31 1>;
 	};
 
-	gpx2: gpx2 {
+	gpx2: gpx2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -189,7 +189,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx3: gpx3 {
+	gpx3: gpx3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -197,104 +197,104 @@
 		#interrupt-cells = <2>;
 	};
 
-	uart0_data: uart0-data {
+	uart0_data: uart0-data-pins {
 		samsung,pins = "gpa0-0", "gpa0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart0_fctl: uart0-fctl {
+	uart0_fctl: uart0-fctl-pins {
 		samsung,pins = "gpa0-2", "gpa0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c2_bus: i2c2-bus {
+	i2c2_bus: i2c2-bus-pins {
 		samsung,pins = "gpa0-6", "gpa0-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c2_hs_bus: i2c2-hs-bus {
+	i2c2_hs_bus: i2c2-hs-bus-pins {
 		samsung,pins = "gpa0-6", "gpa0-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c2_gpio_bus: i2c2-gpio-bus {
+	i2c2_gpio_bus: i2c2-gpio-bus-pins {
 		samsung,pins = "gpa0-6", "gpa0-7";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart2_data: uart2-data {
+	uart2_data: uart2-data-pins {
 		samsung,pins = "gpa1-0", "gpa1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart2_fctl: uart2-fctl {
+	uart2_fctl: uart2-fctl-pins {
 		samsung,pins = "gpa1-2", "gpa1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c3_bus: i2c3-bus {
+	i2c3_bus: i2c3-bus-pins {
 		samsung,pins = "gpa1-2", "gpa1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c3_hs_bus: i2c3-hs-bus {
+	i2c3_hs_bus: i2c3-hs-bus-pins {
 		samsung,pins = "gpa1-2", "gpa1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart3_data: uart3-data {
-		samsung,pins = "gpa1-4", "gpa1-4";
+	uart3_data: uart3-data-pins {
+		samsung,pins = "gpa1-4", "gpa1-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	spi0_bus: spi0-bus {
+	spi0_bus: spi0-bus-pins {
 		samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c4_bus: i2c4-bus {
+	i2c4_bus: i2c4-bus-pins {
 		samsung,pins = "gpa2-0", "gpa2-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c5_bus: i2c5-bus {
+	i2c5_bus: i2c5-bus-pins {
 		samsung,pins = "gpa2-2", "gpa2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	spi1_bus: spi1-bus {
+	spi1_bus: spi1-bus-pins {
 		samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2s1_bus: i2s1-bus {
+	i2s1_bus: i2s1-bus-pins {
 		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
 			       "gpb0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -302,7 +302,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pcm1_bus: pcm1-bus {
+	pcm1_bus: pcm1-bus-pins {
 		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
 			       "gpb0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -310,7 +310,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	ac97_bus: ac97-bus {
+	ac97_bus: ac97-bus-pins {
 		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
 			       "gpb0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
@@ -318,7 +318,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2s2_bus: i2s2-bus {
+	i2s2_bus: i2s2-bus-pins {
 		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
 			       "gpb1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -326,7 +326,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pcm2_bus: pcm2-bus {
+	pcm2_bus: pcm2-bus-pins {
 		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
 			       "gpb1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -334,280 +334,280 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	spdif_bus: spdif-bus {
+	spdif_bus: spdif-bus-pins {
 		samsung,pins = "gpb1-0", "gpb1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	spi2_bus: spi2-bus {
+	spi2_bus: spi2-bus-pins {
 		samsung,pins = "gpb1-1", "gpb1-3", "gpb1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c6_bus: i2c6-bus {
+	i2c6_bus: i2c6-bus-pins {
 		samsung,pins = "gpb1-3", "gpb1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm0_out: pwm0-out {
+	pwm0_out: pwm0-out-pins {
 		samsung,pins = "gpb2-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm1_out: pwm1-out {
+	pwm1_out: pwm1-out-pins {
 		samsung,pins = "gpb2-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm2_out: pwm2-out {
+	pwm2_out: pwm2-out-pins {
 		samsung,pins = "gpb2-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm3_out: pwm3-out {
+	pwm3_out: pwm3-out-pins {
 		samsung,pins = "gpb2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c7_bus: i2c7-bus {
+	i2c7_bus: i2c7-bus-pins {
 		samsung,pins = "gpb2-2", "gpb2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c0_bus: i2c0-bus {
+	i2c0_bus: i2c0-bus-pins {
 		samsung,pins = "gpb3-0", "gpb3-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c1_bus: i2c1-bus {
+	i2c1_bus: i2c1-bus-pins {
 		samsung,pins = "gpb3-2", "gpb3-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c0_hs_bus: i2c0-hs-bus {
+	i2c0_hs_bus: i2c0-hs-bus-pins {
 		samsung,pins = "gpb3-0", "gpb3-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c1_hs_bus: i2c1-hs-bus {
+	i2c1_hs_bus: i2c1-hs-bus-pins {
 		samsung,pins = "gpb3-2", "gpb3-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	sd0_clk: sd0-clk {
+	sd0_clk: sd0-clk-pins {
 		samsung,pins = "gpc0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_cmd: sd0-cmd {
+	sd0_cmd: sd0-cmd-pins {
 		samsung,pins = "gpc0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_cd: sd0-cd {
+	sd0_cd: sd0-cd-pins {
 		samsung,pins = "gpc0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_bus1: sd0-bus-width1 {
+	sd0_bus1: sd0-bus-width1-pins {
 		samsung,pins = "gpc0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_bus4: sd0-bus-width4 {
+	sd0_bus4: sd0-bus-width4-pins {
 		samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5", "gpc0-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_bus8: sd0-bus-width8 {
+	sd0_bus8: sd0-bus-width8-pins {
 		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_clk: sd1-clk {
+	sd1_clk: sd1-clk-pins {
 		samsung,pins = "gpc2-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_cmd: sd1-cmd {
+	sd1_cmd: sd1-cmd-pins {
 		samsung,pins = "gpc2-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_cd: sd1-cd {
+	sd1_cd: sd1-cd-pins {
 		samsung,pins = "gpc2-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_bus1: sd1-bus-width1 {
+	sd1_bus1: sd1-bus-width1-pins {
 		samsung,pins = "gpc2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_bus4: sd1-bus-width4 {
+	sd1_bus4: sd1-bus-width4-pins {
 		samsung,pins = "gpc2-3", "gpc2-4", "gpc2-5", "gpc2-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_clk: sd2-clk {
+	sd2_clk: sd2-clk-pins {
 		samsung,pins = "gpc3-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_cmd: sd2-cmd {
+	sd2_cmd: sd2-cmd-pins {
 		samsung,pins = "gpc3-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_cd: sd2-cd {
+	sd2_cd: sd2-cd-pins {
 		samsung,pins = "gpc3-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_bus1: sd2-bus-width1 {
+	sd2_bus1: sd2-bus-width1-pins {
 		samsung,pins = "gpc3-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_bus4: sd2-bus-width4 {
+	sd2_bus4: sd2-bus-width4-pins {
 		samsung,pins = "gpc3-3", "gpc3-4", "gpc3-5", "gpc3-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_bus8: sd2-bus-width8 {
+	sd2_bus8: sd2-bus-width8-pins {
 		samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd3_clk: sd3-clk {
+	sd3_clk: sd3-clk-pins {
 		samsung,pins = "gpc4-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd3_cmd: sd3-cmd {
+	sd3_cmd: sd3-cmd-pins {
 		samsung,pins = "gpc4-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd3_cd: sd3-cd {
+	sd3_cd: sd3-cd-pins {
 		samsung,pins = "gpc4-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd3_bus1: sd3-bus-width1 {
+	sd3_bus1: sd3-bus-width1-pins {
 		samsung,pins = "gpc4-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd3_bus4: sd3-bus-width4 {
+	sd3_bus4: sd3-bus-width4-pins {
 		samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	uart1_data: uart1-data {
+	uart1_data: uart1-data-pins {
 		samsung,pins = "gpd0-0", "gpd0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart1_fctl: uart1-fctl {
+	uart1_fctl: uart1-fctl-pins {
 		samsung,pins = "gpd0-2", "gpd0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	dp_hpd: dp_hpd {
+	dp_hpd: dp-hpd-pins {
 		samsung,pins = "gpx0-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	hdmi_cec: hdmi-cec {
+	hdmi_cec: hdmi-cec-pins {
 		samsung,pins = "gpx3-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	hdmi_hpd: hdmi-hpd {
+	hdmi_hpd: hdmi-hpd-pins {
 		samsung,pins = "gpx3-7";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 };
 
 &pinctrl_1 {
-	gpe0: gpe0 {
+	gpe0: gpe0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -615,7 +615,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpe1: gpe1 {
+	gpe1: gpe1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -623,7 +623,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf0: gpf0 {
+	gpf0: gpf0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -631,7 +631,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf1: gpf1 {
+	gpf1: gpf1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -639,7 +639,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpg0: gpg0 {
+	gpg0: gpg0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -647,7 +647,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpg1: gpg1 {
+	gpg1: gpg1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -655,7 +655,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpg2: gpg2 {
+	gpg2: gpg2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -663,7 +663,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gph0: gph0 {
+	gph0: gph0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -671,7 +671,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gph1: gph1 {
+	gph1: gph1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -679,7 +679,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	cam_gpio_a: cam-gpio-a {
+	cam_gpio_a: cam-gpio-a-pins {
 		samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
 			       "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
 			       "gpe1-0", "gpe1-1";
@@ -688,7 +688,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	cam_gpio_b: cam-gpio-b {
+	cam_gpio_b: cam-gpio-b-pins {
 		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
 			       "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -696,42 +696,42 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	cam_i2c2_bus: cam-i2c2-bus {
+	cam_i2c2_bus: cam-i2c2-bus-pins {
 		samsung,pins = "gpe0-6", "gpe1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	cam_spi1_bus: cam-spi1-bus {
+	cam_spi1_bus: cam-spi1-bus-pins {
 		samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	cam_i2c1_bus: cam-i2c1-bus {
+	cam_i2c1_bus: cam-i2c1-bus-pins {
 		samsung,pins = "gpf0-2", "gpf0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	cam_i2c0_bus: cam-i2c0-bus {
+	cam_i2c0_bus: cam-i2c0-bus-pins {
 		samsung,pins = "gpf0-0", "gpf0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	cam_spi0_bus: cam-spi0-bus {
+	cam_spi0_bus: cam-spi0-bus-pins {
 		samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	cam_bayrgb_bus: cam-bayrgb-bus {
+	cam_bayrgb_bus: cam-bayrgb-bus-pins {
 		samsung,pins = "gpg0-0", "gpg0-1", "gpg0-2", "gpg0-3",
 			       "gpg0-4", "gpg0-5", "gpg0-6", "gpg0-7",
 			       "gpg1-0", "gpg1-1", "gpg1-2", "gpg1-3",
@@ -742,7 +742,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	cam_port_a: cam-port-a {
+	cam_port_a: cam-port-a-pins {
 		samsung,pins = "gph0-0", "gph0-1", "gph0-2", "gph0-3",
 			       "gph1-0", "gph1-1", "gph1-2", "gph1-3",
 			       "gph1-4", "gph1-5", "gph1-6", "gph1-7";
@@ -753,7 +753,7 @@
 };
 
 &pinctrl_2 {
-	gpv0: gpv0 {
+	gpv0: gpv0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -761,7 +761,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpv1: gpv1 {
+	gpv1: gpv1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -769,7 +769,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpv2: gpv2 {
+	gpv2: gpv2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -777,7 +777,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpv3: gpv3 {
+	gpv3: gpv3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -785,7 +785,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpv4: gpv4 {
+	gpv4: gpv4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -793,7 +793,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	c2c_rxd: c2c-rxd {
+	c2c_rxd: c2c-rxd-pins {
 		samsung,pins = "gpv0-0", "gpv0-1", "gpv0-2", "gpv0-3",
 			       "gpv0-4", "gpv0-5", "gpv0-6", "gpv0-7",
 			       "gpv1-0", "gpv1-1", "gpv1-2", "gpv1-3",
@@ -803,7 +803,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	c2c_txd: c2c-txd {
+	c2c_txd: c2c-txd-pins {
 		samsung,pins = "gpv2-0", "gpv2-1", "gpv2-2", "gpv2-3",
 			       "gpv2-4", "gpv2-5", "gpv2-6", "gpv2-7",
 			       "gpv3-0", "gpv3-1", "gpv3-2", "gpv3-3",
@@ -815,7 +815,7 @@
 };
 
 &pinctrl_3 {
-	gpz: gpz {
+	gpz: gpz-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -823,7 +823,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	i2s0_bus: i2s0-bus {
+	i2s0_bus: i2s0-bus-pins {
 		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
 				"gpz-4", "gpz-5", "gpz-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 39bbe18145cf..21fbbf3d8684 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -118,6 +118,9 @@
 	status = "okay";
 	ddc = <&i2c_2>;
 	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	vdd-supply = <&ldo8_reg>;
+	vdd_osc-supply = <&ldo10_reg>;
+	vdd_pll-supply = <&ldo8_reg>;
 };
 
 &i2c_0 {
@@ -410,10 +413,15 @@
 };
 
 &pinctrl_0 {
-	max77686_irq: max77686-irq {
+	max77686_irq: max77686-irq-pins {
 		samsung,pins = "gpx3-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
+
+&usbdrd {
+	vdd10-supply = <&ldo15_reg>;
+	vdd33-supply = <&ldo12_reg>;
+};
diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
index 2335c4687349..c15ecfc4077d 100644
--- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi
+++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
@@ -587,63 +587,63 @@
 };
 
 &pinctrl_0 {
-	wifi_en: wifi-en {
+	wifi_en: wifi-en-pins {
 		samsung,pins = "gpx0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	wifi_rst: wifi-rst {
+	wifi_rst: wifi-rst-pins {
 		samsung,pins = "gpx0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	power_key_irq: power-key-irq {
+	power_key_irq: power-key-irq-pins {
 		samsung,pins = "gpx1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	ec_irq: ec-irq {
+	ec_irq: ec-irq-pins {
 		samsung,pins = "gpx1-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	tps65090_irq: tps65090-irq {
+	tps65090_irq: tps65090-irq-pins {
 		samsung,pins = "gpx2-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	usb3_vbus_en: usb3-vbus-en {
+	usb3_vbus_en: usb3-vbus-en-pins {
 		samsung,pins = "gpx2-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	max77686_irq: max77686-irq {
+	max77686_irq: max77686-irq-pins {
 		samsung,pins = "gpx3-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	lid_irq: lid-irq {
+	lid_irq: lid-irq-pins {
 		samsung,pins = "gpx3-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	hdmi_hpd_irq: hdmi-hpd-irq {
+	hdmi_hpd_irq: hdmi-hpd-irq-pins {
 		samsung,pins = "gpx3-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
@@ -652,14 +652,14 @@
 };
 
 &pinctrl_1 {
-	arb_their_claim: arb-their-claim {
+	arb_their_claim: arb-their-claim-pins {
 		samsung,pins = "gpe0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	arb_our_claim: arb-our-claim {
+	arb_our_claim: arb-our-claim-pins {
 		samsung,pins = "gpf0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -698,6 +698,11 @@
 	cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>;
 };
 
+&usbdrd {
+	vdd10-supply = <&ldo15_reg>;
+	vdd33-supply = <&ldo12_reg>;
+};
+
 &usbdrd_dwc3 {
 	dr_mode = "host";
 };
diff --git a/arch/arm/boot/dts/exynos5250-snow-rev5.dts b/arch/arm/boot/dts/exynos5250-snow-rev5.dts
index f8ca61df6981..0a47597d6f0d 100644
--- a/arch/arm/boot/dts/exynos5250-snow-rev5.dts
+++ b/arch/arm/boot/dts/exynos5250-snow-rev5.dts
@@ -47,7 +47,7 @@
 };
 
 &pinctrl_0 {
-	max98090_irq: max98090-irq {
+	max98090_irq: max98090-irq-pins {
 		samsung,pins = "gpx0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index a630bc654a49..906aa7aae710 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -43,7 +43,7 @@
 };
 
 &pinctrl_0 {
-	max98095_en: max98095-en {
+	max98095_en: max98095-en-pins {
 		samsung,pins = "gpx1-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts
index e0feedcf54bb..24609bb20158 100644
--- a/arch/arm/boot/dts/exynos5250-spring.dts
+++ b/arch/arm/boot/dts/exynos5250-spring.dts
@@ -451,63 +451,63 @@
 };
 
 &pinctrl_0 {
-	s5m8767_dvs: s5m8767-dvs {
+	s5m8767_dvs: s5m8767-dvs-pins {
 		samsung,pins = "gpd1-0", "gpd1-1", "gpd1-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	dp_hpd_gpio: dp-hpd {
+	dp_hpd_gpio: dp-hpd-pins {
 		samsung,pins = "gpc3-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	trackpad_irq: trackpad-irq {
+	trackpad_irq: trackpad-irq-pins {
 		samsung,pins = "gpx1-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	power_key_irq: power-key-irq {
+	power_key_irq: power-key-irq-pins {
 		samsung,pins = "gpx1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	ec_irq: ec-irq {
+	ec_irq: ec-irq-pins {
 		samsung,pins = "gpx1-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	s5m8767_ds: s5m8767-ds {
+	s5m8767_ds: s5m8767-ds-pins {
 		samsung,pins = "gpx2-3", "gpx2-4", "gpx2-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	s5m8767_irq: s5m8767-irq {
+	s5m8767_irq: s5m8767-irq-pins {
 		samsung,pins = "gpx3-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	lid_irq: lid-irq {
+	lid_irq: lid-irq-pins {
 		samsung,pins = "gpx3-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	hdmi_hpd_irq: hdmi-hpd-irq {
+	hdmi_hpd_irq: hdmi-hpd-irq-pins {
 		samsung,pins = "gpx3-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
@@ -516,7 +516,7 @@
 };
 
 &pinctrl_1 {
-	hsic_reset: hsic-reset {
+	hsic_reset: hsic-reset-pins {
 		samsung,pins = "gpe1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -553,4 +553,9 @@
 	num-cs = <1>;
 };
 
+&usbdrd {
+	vdd10-supply = <&ldo15_reg>;
+	vdd33-supply = <&ldo12_reg>;
+};
+
 #include "cros-ec-keyboard.dtsi"
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 139778928b93..5baaa7eb71a4 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -496,8 +496,7 @@
 			status = "disabled";
 			reg = <0x12d20000 0x100>;
 			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&pdma0 5
-				&pdma0 4>;
+			dmas = <&pdma0 5>, <&pdma0 4>;
 			dma-names = "tx", "rx";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -512,8 +511,7 @@
 			status = "disabled";
 			reg = <0x12d30000 0x100>;
 			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&pdma1 5
-				&pdma1 4>;
+			dmas = <&pdma1 5>, <&pdma1 4>;
 			dma-names = "tx", "rx";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -528,8 +526,7 @@
 			status = "disabled";
 			reg = <0x12d40000 0x100>;
 			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&pdma0 7
-				&pdma0 6>;
+			dmas = <&pdma0 7>, <&pdma0 6>;
 			dma-names = "tx", "rx";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -637,7 +634,7 @@
 			#sound-dai-cells = <1>;
 		};
 
-		usb_dwc3 {
+		usbdrd: usb3 {
 			compatible = "samsung,exynos5250-dwusb3";
 			clocks = <&clock CLK_USB3>;
 			clock-names = "usbdrd30";
@@ -695,7 +692,7 @@
 			samsung,pmureg-phandle = <&pmu_system_controller>;
 		};
 
-		pdma0: pdma@121a0000 {
+		pdma0: dma-controller@121a0000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x121A0000 0x1000>;
 			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
@@ -706,7 +703,7 @@
 			#dma-requests = <32>;
 		};
 
-		pdma1: pdma@121b0000 {
+		pdma1: dma-controller@121b0000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x121B0000 0x1000>;
 			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
@@ -717,7 +714,7 @@
 			#dma-requests = <32>;
 		};
 
-		mdma0: mdma@10800000 {
+		mdma0: dma-controller@10800000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x10800000 0x1000>;
 			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
@@ -728,7 +725,7 @@
 			#dma-requests = <1>;
 		};
 
-		mdma1: mdma@11c10000 {
+		mdma1: dma-controller@11c10000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x11C10000 0x1000>;
 			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/exynos5260-pinctrl.dtsi b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
index 17e2f3e0d71e..150607f8103d 100644
--- a/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
@@ -12,7 +12,7 @@
 #include <dt-bindings/pinctrl/samsung.h>
 
 &pinctrl_0 {
-	gpa0: gpa0 {
+	gpa0: gpa0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -20,7 +20,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpa1: gpa1 {
+	gpa1: gpa1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -28,7 +28,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpa2: gpa2 {
+	gpa2: gpa2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -36,7 +36,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb0: gpb0 {
+	gpb0: gpb0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -44,7 +44,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb1: gpb1 {
+	gpb1: gpb1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -52,7 +52,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb2: gpb2 {
+	gpb2: gpb2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -60,7 +60,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb3: gpb3 {
+	gpb3: gpb3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -68,7 +68,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb4: gpb4 {
+	gpb4: gpb4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -76,7 +76,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb5: gpb5 {
+	gpb5: gpb5-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -84,7 +84,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd0: gpd0 {
+	gpd0: gpd0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -92,7 +92,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd1: gpd1 {
+	gpd1: gpd1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -100,7 +100,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd2: gpd2 {
+	gpd2: gpd2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -108,7 +108,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpe0: gpe0 {
+	gpe0: gpe0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -116,7 +116,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpe1: gpe1 {
+	gpe1: gpe1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -124,7 +124,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf0: gpf0 {
+	gpf0: gpf0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -132,7 +132,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf1: gpf1 {
+	gpf1: gpf1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -140,7 +140,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpk0: gpk0 {
+	gpk0: gpk0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -148,7 +148,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx0: gpx0 {
+	gpx0: gpx0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -164,7 +164,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx1: gpx1 {
+	gpx1: gpx1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -180,7 +180,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx2: gpx2 {
+	gpx2: gpx2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -188,7 +188,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx3: gpx3 {
+	gpx3: gpx3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -196,63 +196,63 @@
 		#interrupt-cells = <2>;
 	};
 
-	uart0_data: uart0-data {
+	uart0_data: uart0-data-pins {
 		samsung,pins = "gpa0-0", "gpa0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	uart0_fctl: uart0-fctl {
+	uart0_fctl: uart0-fctl-pins {
 		samsung,pins = "gpa0-2", "gpa0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	uart1_data: uart1-data {
+	uart1_data: uart1-data-pins {
 		samsung,pins = "gpa1-0", "gpa1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	uart1_fctl: uart1-fctl {
+	uart1_fctl: uart1-fctl-pins {
 		samsung,pins = "gpa1-2", "gpa1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	uart2_data: uart2-data {
+	uart2_data: uart2-data-pins {
 		samsung,pins = "gpa1-4", "gpa1-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	spi0_bus: spi0-bus {
+	spi0_bus: spi0-bus-pins {
 		samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	spi1_bus: spi1-bus {
+	spi1_bus: spi1-bus-pins {
 		samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	usb3_vbus0_en: usb3-vbus0-en {
+	usb3_vbus0_en: usb3-vbus0-en-pins {
 		samsung,pins = "gpa2-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	i2s1_bus: i2s1-bus {
+	i2s1_bus: i2s1-bus-pins {
 		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
 				"gpb0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -260,7 +260,7 @@
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	pcm1_bus: pcm1-bus {
+	pcm1_bus: pcm1-bus-pins {
 		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
 				"gpb0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -268,105 +268,105 @@
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	spdif1_bus: spdif1-bus {
+	spdif1_bus: spdif1-bus-pins {
 		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	spi2_bus: spi2-bus {
+	spi2_bus: spi2-bus-pins {
 		samsung,pins = "gpb1-0", "gpb1-2", "gpb1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	i2c0_hs_bus: i2c0-hs-bus {
+	i2c0_hs_bus: i2c0-hs-bus-pins {
 		samsung,pins = "gpb3-0", "gpb3-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	i2c1_hs_bus: i2c1-hs-bus {
+	i2c1_hs_bus: i2c1-hs-bus-pins {
 		samsung,pins = "gpb3-2", "gpb3-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	i2c2_hs_bus: i2c2-hs-bus {
+	i2c2_hs_bus: i2c2-hs-bus-pins {
 		samsung,pins = "gpb3-4", "gpb3-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	i2c3_hs_bus: i2c3-hs-bus {
+	i2c3_hs_bus: i2c3-hs-bus-pins {
 		samsung,pins = "gpb3-6", "gpb3-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	i2c4_bus: i2c4-bus {
+	i2c4_bus: i2c4-bus-pins {
 		samsung,pins = "gpb4-0", "gpb4-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	i2c5_bus: i2c5-bus {
+	i2c5_bus: i2c5-bus-pins {
 		samsung,pins = "gpb4-2", "gpb4-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	i2c6_bus: i2c6-bus {
+	i2c6_bus: i2c6-bus-pins {
 		samsung,pins = "gpb4-4", "gpb4-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	i2c7_bus: i2c7-bus {
+	i2c7_bus: i2c7-bus-pins {
 		samsung,pins = "gpb4-6", "gpb4-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	i2c8_bus: i2c8-bus {
+	i2c8_bus: i2c8-bus-pins {
 		samsung,pins = "gpb5-0", "gpb5-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	i2c9_bus: i2c9-bus {
+	i2c9_bus: i2c9-bus-pins {
 		samsung,pins = "gpb5-2", "gpb5-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	i2c10_bus: i2c10-bus {
+	i2c10_bus: i2c10-bus-pins {
 		samsung,pins = "gpb5-4", "gpb5-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	i2c11_bus: i2c11-bus {
+	i2c11_bus: i2c11-bus-pins {
 		samsung,pins = "gpb5-6", "gpb5-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	cam_gpio_a: cam-gpio-a {
+	cam_gpio_a: cam-gpio-a-pins {
 		samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
 			"gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
 			"gpe1-0", "gpe1-1";
@@ -375,7 +375,7 @@
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	cam_gpio_b: cam-gpio-b {
+	cam_gpio_b: cam-gpio-b-pins {
 		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
 			"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -383,28 +383,28 @@
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	cam_i2c1_bus: cam-i2c1-bus {
+	cam_i2c1_bus: cam-i2c1-bus-pins {
 		samsung,pins = "gpf0-2", "gpf0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	cam_i2c0_bus: cam-i2c0-bus {
+	cam_i2c0_bus: cam-i2c0-bus-pins {
 		samsung,pins = "gpf0-0", "gpf0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	cam_spi0_bus: cam-spi0-bus {
+	cam_spi0_bus: cam-spi0-bus-pins {
 		samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	cam_spi1_bus: cam-spi1-bus {
+	cam_spi1_bus: cam-spi1-bus-pins {
 		samsung,pins = "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -413,7 +413,7 @@
 };
 
 &pinctrl_1 {
-	gpc0: gpc0 {
+	gpc0: gpc0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -421,7 +421,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc1: gpc1 {
+	gpc1: gpc1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -429,7 +429,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc2: gpc2 {
+	gpc2: gpc2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -437,7 +437,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc3: gpc3 {
+	gpc3: gpc3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -445,7 +445,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc4: gpc4 {
+	gpc4: gpc4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -453,112 +453,112 @@
 		#interrupt-cells = <2>;
 	};
 
-	sd0_clk: sd0-clk {
+	sd0_clk: sd0-clk-pins {
 		samsung,pins = "gpc0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd0_cmd: sd0-cmd {
+	sd0_cmd: sd0-cmd-pins {
 		samsung,pins = "gpc0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd0_bus1: sd0-bus-width1 {
+	sd0_bus1: sd0-bus-width1-pins {
 		samsung,pins = "gpc0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd0_bus4: sd0-bus-width4 {
+	sd0_bus4: sd0-bus-width4-pins {
 		samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd0_bus8: sd0-bus-width8 {
+	sd0_bus8: sd0-bus-width8-pins {
 		samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd0_rdqs: sd0-rdqs {
+	sd0_rdqs: sd0-rdqs-pins {
 		samsung,pins = "gpc0-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd1_clk: sd1-clk {
+	sd1_clk: sd1-clk-pins {
 		samsung,pins = "gpc1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd1_cmd: sd1-cmd {
+	sd1_cmd: sd1-cmd-pins {
 		samsung,pins = "gpc1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd1_bus1: sd1-bus-width1 {
+	sd1_bus1: sd1-bus-width1-pins {
 		samsung,pins = "gpc1-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd1_bus4: sd1-bus-width4 {
+	sd1_bus4: sd1-bus-width4-pins {
 		samsung,pins = "gpc1-3", "gpc1-4", "gpc1-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd1_bus8: sd1-bus-width8 {
+	sd1_bus8: sd1-bus-width8-pins {
 		samsung,pins = "gpc4-0", "gpc4-1", "gpc4-2", "gpc4-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd2_clk: sd2-clk {
+	sd2_clk: sd2-clk-pins {
 		samsung,pins = "gpc2-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd2_cmd: sd2-cmd {
+	sd2_cmd: sd2-cmd-pins {
 		samsung,pins = "gpc2-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd2_cd: sd2-cd {
+	sd2_cd: sd2-cd-pins {
 		samsung,pins = "gpc2-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd2_bus1: sd2-bus-width1 {
+	sd2_bus1: sd2-bus-width1-pins {
 		samsung,pins = "gpc2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd2_bus4: sd2-bus-width4 {
+	sd2_bus4: sd2-bus-width4-pins {
 		samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
@@ -567,7 +567,7 @@
 };
 
 &pinctrl_2 {
-	gpz0: gpz0 {
+	gpz0: gpz0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -575,7 +575,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpz1: gpz1 {
+	gpz1: gpz1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
diff --git a/arch/arm/boot/dts/exynos5260-xyref5260.dts b/arch/arm/boot/dts/exynos5260-xyref5260.dts
index 0dc2ec16aa0a..3c3b751d4360 100644
--- a/arch/arm/boot/dts/exynos5260-xyref5260.dts
+++ b/arch/arm/boot/dts/exynos5260-xyref5260.dts
@@ -29,6 +29,27 @@
 		#clock-cells = <0>;
 	};
 
+	ioclk_pcm: clock-pcm-ext {
+		compatible = "fixed-clock";
+		clock-frequency = <2048000>;
+		clock-output-names = "ioclk_pcm_extclk";
+		#clock-cells = <0>;
+	};
+
+	ioclk_i2s: clock-i2s-cd {
+		compatible = "fixed-clock";
+		clock-frequency = <147456000>;
+		clock-output-names = "ioclk_i2s_cdclk";
+		#clock-cells = <0>;
+	};
+
+	ioclk_spdif: clock-spdif-ext {
+		compatible = "fixed-clock";
+		clock-frequency = <49152000>;
+		clock-output-names = "ioclk_spdif_extclk";
+		#clock-cells = <0>;
+	};
+
 	xrtcxti: xrtcxti {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
@@ -38,7 +59,7 @@
 };
 
 &pinctrl_0 {
-	hdmi_hpd_irq: hdmi-hpd-irq {
+	hdmi_hpd_irq: hdmi-hpd-irq-pins {
 		samsung,pins = "gpx3-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi
index 524d244050e0..56271e7c4587 100644
--- a/arch/arm/boot/dts/exynos5260.dtsi
+++ b/arch/arm/boot/dts/exynos5260.dtsi
@@ -113,78 +113,206 @@
 			compatible = "samsung,exynos5260-clock-top";
 			reg = <0x10010000 0x10000>;
 			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&clock_mif MIF_DOUT_MEM_PLL>,
+				 <&clock_mif MIF_DOUT_BUS_PLL>,
+				 <&clock_mif MIF_DOUT_MEDIA_PLL>;
+			clock-names = "fin_pll",
+				      "dout_mem_pll",
+				      "dout_bus_pll",
+				      "dout_media_pll";
 		};
 
 		clock_peri: clock-controller@10200000 {
 			compatible = "samsung,exynos5260-clock-peri";
 			reg = <0x10200000 0x10000>;
 			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&ioclk_pcm>,
+				 <&ioclk_i2s>,
+				 <&ioclk_spdif>,
+				 <&fin_pll>,
+				 <&clock_top TOP_DOUT_ACLK_PERI_66>,
+				 <&clock_top TOP_DOUT_SCLK_PERI_UART0>,
+				 <&clock_top TOP_DOUT_SCLK_PERI_UART1>,
+				 <&clock_top TOP_DOUT_SCLK_PERI_UART2>,
+				 <&clock_top TOP_DOUT_SCLK_PERI_SPI0_B>,
+				 <&clock_top TOP_DOUT_SCLK_PERI_SPI1_B>,
+				 <&clock_top TOP_DOUT_SCLK_PERI_SPI2_B>,
+				 <&clock_top TOP_DOUT_ACLK_PERI_AUD>;
+			clock-names = "fin_pll",
+				      "ioclk_pcm_extclk",
+				      "ioclk_i2s_cdclk",
+				      "ioclk_spdif_extclk",
+				      "phyclk_hdmi_phy_ref_cko",
+				      "dout_aclk_peri_66",
+				      "dout_sclk_peri_uart0",
+				      "dout_sclk_peri_uart1",
+				      "dout_sclk_peri_uart2",
+				      "dout_sclk_peri_spi0_b",
+				      "dout_sclk_peri_spi1_b",
+				      "dout_sclk_peri_spi2_b",
+				      "dout_aclk_peri_aud";
 		};
 
 		clock_egl: clock-controller@10600000 {
 			compatible = "samsung,exynos5260-clock-egl";
 			reg = <0x10600000 0x10000>;
 			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&clock_mif MIF_DOUT_BUS_PLL>;
+			clock-names = "fin_pll",
+				      "dout_bus_pll";
 		};
 
 		clock_kfc: clock-controller@10700000 {
 			compatible = "samsung,exynos5260-clock-kfc";
 			reg = <0x10700000 0x10000>;
 			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&clock_mif MIF_DOUT_MEDIA_PLL>;
+			clock-names = "fin_pll",
+				      "dout_media_pll";
 		};
 
 		clock_g2d: clock-controller@10a00000 {
 			compatible = "samsung,exynos5260-clock-g2d";
 			reg = <0x10A00000 0x10000>;
 			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&clock_top TOP_DOUT_ACLK_G2D_333>;
+			clock-names = "fin_pll",
+				      "dout_aclk_g2d_333";
 		};
 
 		clock_mif: clock-controller@10ce0000 {
 			compatible = "samsung,exynos5260-clock-mif";
 			reg = <0x10CE0000 0x10000>;
 			#clock-cells = <1>;
+			clocks = <&fin_pll>;
+			clock-names = "fin_pll";
 		};
 
 		clock_mfc: clock-controller@11090000 {
 			compatible = "samsung,exynos5260-clock-mfc";
 			reg = <0x11090000 0x10000>;
 			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&clock_top TOP_DOUT_ACLK_MFC_333>;
+			clock-names = "fin_pll",
+				      "dout_aclk_mfc_333";
 		};
 
 		clock_g3d: clock-controller@11830000 {
 			compatible = "samsung,exynos5260-clock-g3d";
 			reg = <0x11830000 0x10000>;
 			#clock-cells = <1>;
+			clocks = <&fin_pll>;
+			clock-names = "fin_pll";
 		};
 
 		clock_fsys: clock-controller@122e0000 {
 			compatible = "samsung,exynos5260-clock-fsys";
 			reg = <0x122E0000 0x10000>;
 			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&clock_top TOP_DOUT_ACLK_FSYS_200>;
+			clock-names = "fin_pll",
+				      "phyclk_usbhost20_phy_phyclock",
+				      "phyclk_usbhost20_phy_freeclk",
+				      "phyclk_usbhost20_phy_clk48mohci",
+				      "phyclk_usbdrd30_udrd30_pipe_pclk",
+				      "phyclk_usbdrd30_udrd30_phyclock",
+				      "dout_aclk_fsys_200";
 		};
 
 		clock_aud: clock-controller@128c0000 {
 			compatible = "samsung,exynos5260-clock-aud";
 			reg = <0x128C0000 0x10000>;
 			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&clock_top TOP_FOUT_AUD_PLL>,
+				 <&ioclk_i2s>,
+				 <&ioclk_pcm>;
+			clock-names = "fin_pll",
+				      "fout_aud_pll",
+				      "ioclk_i2s_cdclk",
+				      "ioclk_pcm_extclk";
 		};
 
 		clock_isp: clock-controller@133c0000 {
 			compatible = "samsung,exynos5260-clock-isp";
 			reg = <0x133C0000 0x10000>;
 			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&clock_top TOP_DOUT_ACLK_ISP1_266>,
+				 <&clock_top TOP_DOUT_ACLK_ISP1_400>,
+				 <&clock_top TOP_MOUT_ACLK_ISP1_266>;
+			clock-names = "fin_pll",
+				      "dout_aclk_isp1_266",
+				      "dout_aclk_isp1_400",
+				      "mout_aclk_isp1_266";
 		};
 
 		clock_gscl: clock-controller@13f00000 {
 			compatible = "samsung,exynos5260-clock-gscl";
 			reg = <0x13F00000 0x10000>;
 			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&clock_top TOP_DOUT_ACLK_GSCL_400>,
+				 <&clock_top TOP_DOUT_ACLK_GSCL_333>;
+			clock-names = "fin_pll",
+				      "dout_aclk_gscl_400",
+				      "dout_aclk_gscl_333";
 		};
 
 		clock_disp: clock-controller@14550000 {
 			compatible = "samsung,exynos5260-clock-disp";
 			reg = <0x14550000 0x10000>;
 			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&ioclk_spdif>,
+				 <&clock_top TOP_DOUT_ACLK_PERI_AUD>,
+				 <&clock_top TOP_DOUT_ACLK_DISP_222>,
+				 <&clock_top TOP_DOUT_SCLK_DISP_PIXEL>,
+				 <&clock_top TOP_DOUT_ACLK_DISP_333>;
+			clock-names = "fin_pll",
+				      "phyclk_dptx_phy_ch3_txd_clk",
+				      "phyclk_dptx_phy_ch2_txd_clk",
+				      "phyclk_dptx_phy_ch1_txd_clk",
+				      "phyclk_dptx_phy_ch0_txd_clk",
+				      "phyclk_hdmi_phy_tmds_clko",
+				      "phyclk_hdmi_phy_ref_clko",
+				      "phyclk_hdmi_phy_pixel_clko",
+				      "phyclk_hdmi_link_o_tmds_clkhi",
+				      "phyclk_mipi_dphy_4l_m_txbyte_clkhs",
+				      "phyclk_dptx_phy_o_ref_clk_24m",
+				      "phyclk_dptx_phy_clk_div2",
+				      "phyclk_mipi_dphy_4l_m_rxclkesc0",
+				      "phyclk_hdmi_phy_ref_cko",
+				      "ioclk_spdif_extclk",
+				      "dout_aclk_peri_aud",
+				      "dout_aclk_disp_222",
+				      "dout_sclk_disp_pixel",
+				      "dout_aclk_disp_333";
 		};
 
 		gic: interrupt-controller@10481000 {
diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts
index 884fef55836c..e54a3391854d 100644
--- a/arch/arm/boot/dts/exynos5410-odroidxu.dts
+++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts
@@ -188,8 +188,7 @@
 		interrupt-parent = <&gpx0>;
 		interrupts = <4 IRQ_TYPE_NONE>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&max77802_irq>, <&pmic_dvs_1>, <&pmic_dvs_2>,
-			    <&pmic_dvs_3>;
+		pinctrl-0 = <&max77802_irq>, <&pmic_dvs_1>, <&pmic_dvs_2>;
 		wakeup-source;
 		#clock-cells = <1>;
 
@@ -394,10 +393,6 @@
 				regulator-always-on;
 			};
 
-			ldo16_reg: LDO16 {
-				regulator-name = "ldo16";
-			};
-
 			ldo17_reg: LDO17 {
 				regulator-name = "cam_sensor_core";
 				regulator-min-microvolt = <1200000>;
@@ -427,10 +422,6 @@
 				regulator-max-microvolt = <2850000>;
 			};
 
-			ldo22_reg: LDO22 {
-				regulator-name = "ldo22";
-			};
-
 			ldo23_reg: LDO23 {
 				regulator-name = "dp_p3v3";
 				regulator-min-microvolt = <3300000>;
@@ -477,10 +468,6 @@
 				regulator-always-on;
 			};
 
-			ldo31_reg: LDO31 {
-				regulator-name = "ldo31";
-			};
-
 			/* On revisions with ti,ina231 this is sensor VS */
 			ldo32_reg: LDO32 {
 				regulator-name = "vs_power_meter";
@@ -548,14 +535,14 @@
 };
 
 &pinctrl_0 {
-	emmc_nrst_pin: emmc-nrst {
+	emmc_nrst_pin: emmc-nrst-pins {
 		samsung,pins = "gpd1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	sd2_wp: sd2-wp {
+	sd2_wp: sd2-wp-pins {
 		samsung,pins = "gpm5-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		/* Pin is floating so be sure to disable write-protect */
@@ -563,21 +550,14 @@
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	pmic_dvs_3: pmic-dvs-3 {
-		samsung,pins = "gpx0-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
-
-	pmic_dvs_2: pmic-dvs-2 {
-		samsung,pins = "gpx0-1";
+	pmic_dvs_2: pmic-dvs-2-pins {
+		samsung,pins = "gpx0-0", "gpx0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	pmic_dvs_1: pmic-dvs-1 {
+	pmic_dvs_1: pmic-dvs-1-pins {
 		samsung,pins = "gpx0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -585,7 +565,7 @@
 		samsung,pin-val = <1>;
 	};
 
-	max77802_irq: max77802-irq {
+	max77802_irq: max77802-irq-pins {
 		samsung,pins = "gpx0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
diff --git a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
index 9599ba8ba798..6c7814b4372e 100644
--- a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
@@ -9,7 +9,7 @@
 #include <dt-bindings/pinctrl/samsung.h>
 
 &pinctrl_0 {
-	gpa0: gpa0 {
+	gpa0: gpa0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -17,7 +17,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpa1: gpa1 {
+	gpa1: gpa1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -25,7 +25,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpa2: gpa2 {
+	gpa2: gpa2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -33,7 +33,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb0: gpb0 {
+	gpb0: gpb0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -41,7 +41,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb1: gpb1 {
+	gpb1: gpb1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -49,7 +49,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb2: gpb2 {
+	gpb2: gpb2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -57,7 +57,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb3: gpb3 {
+	gpb3: gpb3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -65,7 +65,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc0: gpc0 {
+	gpc0: gpc0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -73,7 +73,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc3: gpc3 {
+	gpc3: gpc3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -81,7 +81,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc1: gpc1 {
+	gpc1: gpc1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -89,7 +89,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc2: gpc2 {
+	gpc2: gpc2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -97,12 +97,12 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpm5: gpm5 {
+	gpm5: gpm5-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpd1: gpd1 {
+	gpd1: gpd1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -110,7 +110,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpe0: gpe0 {
+	gpe0: gpe0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -118,7 +118,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpe1: gpe1 {
+	gpe1: gpe1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -126,7 +126,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf0: gpf0 {
+	gpf0: gpf0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -134,7 +134,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf1: gpf1 {
+	gpf1: gpf1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -142,7 +142,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpg0: gpg0 {
+	gpg0: gpg0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -150,7 +150,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpg1: gpg1 {
+	gpg1: gpg1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -158,7 +158,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpg2: gpg2 {
+	gpg2: gpg2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -166,7 +166,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gph0: gph0 {
+	gph0: gph0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -174,7 +174,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gph1: gph1 {
+	gph1: gph1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -182,52 +182,52 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpm7: gpm7 {
+	gpm7: gpm7-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy0: gpy0 {
+	gpy0: gpy0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy1: gpy1 {
+	gpy1: gpy1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy2: gpy2 {
+	gpy2: gpy2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy3: gpy3 {
+	gpy3: gpy3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy4: gpy4 {
+	gpy4: gpy4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy5: gpy5 {
+	gpy5: gpy5-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy6: gpy6 {
+	gpy6: gpy6-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy7: gpy7 {
+	gpy7: gpy7-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpx0: gpx0 {
+	gpx0: gpx0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -244,7 +244,7 @@
 			     <27 1>;
 	};
 
-	gpx1: gpx1 {
+	gpx1: gpx1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -261,7 +261,7 @@
 			     <31 1>;
 	};
 
-	gpx2: gpx2 {
+	gpx2: gpx2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -269,7 +269,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx3: gpx3 {
+	gpx3: gpx3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -277,210 +277,210 @@
 		#interrupt-cells = <2>;
 	};
 
-	uart0_data: uart0-data {
+	uart0_data: uart0-data-pins {
 		samsung,pins = "gpa0-0", "gpa0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	uart0_fctl: uart0-fctl {
+	uart0_fctl: uart0-fctl-pins {
 		samsung,pins = "gpa0-2", "gpa0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	uart1_data: uart1-data {
+	uart1_data: uart1-data-pins {
 		samsung,pins = "gpa0-4", "gpa0-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	uart1_fctl: uart1-fctl {
+	uart1_fctl: uart1-fctl-pins {
 		samsung,pins = "gpa0-6", "gpa0-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2c2_bus: i2c2-bus {
+	i2c2_bus: i2c2-bus-pins {
 		samsung,pins = "gpa0-6", "gpa0-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	uart2_data: uart2-data {
+	uart2_data: uart2-data-pins {
 		samsung,pins = "gpa1-0", "gpa1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	uart2_fctl: uart2-fctl {
+	uart2_fctl: uart2-fctl-pins {
 		samsung,pins = "gpa1-2", "gpa1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2c3_bus: i2c3-bus {
+	i2c3_bus: i2c3-bus-pins {
 		samsung,pins = "gpa1-2", "gpa1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	uart3_data: uart3-data {
+	uart3_data: uart3-data-pins {
 		samsung,pins = "gpa1-4", "gpa1-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2c4_hs_bus: i2c4-hs-bus {
+	i2c4_hs_bus: i2c4-hs-bus-pins {
 		samsung,pins = "gpa2-0", "gpa2-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2c5_hs_bus: i2c5-hs-bus {
+	i2c5_hs_bus: i2c5-hs-bus-pins {
 		samsung,pins = "gpa2-2", "gpa2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2c6_hs_bus: i2c6-hs-bus {
+	i2c6_hs_bus: i2c6-hs-bus-pins {
 		samsung,pins = "gpb1-3", "gpb1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	pwm0_out: pwm0-out {
+	pwm0_out: pwm0-out-pins {
 		samsung,pins = "gpb2-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	pwm1_out: pwm1-out {
+	pwm1_out: pwm1-out-pins {
 		samsung,pins = "gpb2-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	pwm2_out: pwm2-out {
+	pwm2_out: pwm2-out-pins {
 		samsung,pins = "gpb2-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	pwm3_out: pwm3-out {
+	pwm3_out: pwm3-out-pins {
 		samsung,pins = "gpb2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2c7_hs_bus: i2c7-hs-bus {
+	i2c7_hs_bus: i2c7-hs-bus-pins {
 		samsung,pins = "gpb2-2", "gpb2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2c0_bus: i2c0-bus {
+	i2c0_bus: i2c0-bus-pins {
 		samsung,pins = "gpb3-0", "gpb3-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2c1_bus: i2c1-bus {
+	i2c1_bus: i2c1-bus-pins {
 		samsung,pins = "gpb3-2", "gpb3-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	sd0_clk: sd0-clk {
+	sd0_clk: sd0-clk-pins {
 		samsung,pins = "gpc0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd0_cmd: sd0-cmd {
+	sd0_cmd: sd0-cmd-pins {
 		samsung,pins = "gpc0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd0_cd: sd0-cd {
+	sd0_cd: sd0-cd-pins {
 		samsung,pins = "gpc0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd0_bus1: sd0-bus-width1 {
+	sd0_bus1: sd0-bus-width1-pins {
 		samsung,pins = "gpc0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd0_bus4: sd0-bus-width4 {
+	sd0_bus4: sd0-bus-width4-pins {
 		samsung,pins = "gpc0-4", "gpc0-5", "gpc0-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd2_clk: sd2-clk {
+	sd2_clk: sd2-clk-pins {
 		samsung,pins = "gpc2-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd2_cmd: sd2-cmd {
+	sd2_cmd: sd2-cmd-pins {
 		samsung,pins = "gpc2-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd2_cd: sd2-cd {
+	sd2_cd: sd2-cd-pins {
 		samsung,pins = "gpc2-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd2_bus1: sd2-bus-width1 {
+	sd2_bus1: sd2-bus-width1-pins {
 		samsung,pins = "gpc2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd2_bus4: sd2-bus-width4 {
+	sd2_bus4: sd2-bus-width4-pins {
 		samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd0_bus8: sd0-bus-width8 {
+	sd0_bus8: sd0-bus-width8-pins {
 		samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
@@ -489,7 +489,7 @@
 };
 
 &pinctrl_1 {
-	gpj0: gpj0 {
+	gpj0: gpj0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -497,7 +497,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpj1: gpj1 {
+	gpj1: gpj1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -505,7 +505,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpj2: gpj2 {
+	gpj2: gpj2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -513,7 +513,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpj3: gpj3 {
+	gpj3: gpj3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -521,7 +521,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpj4: gpj4 {
+	gpj4: gpj4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -529,7 +529,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpk0: gpk0 {
+	gpk0: gpk0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -537,7 +537,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpk1: gpk1 {
+	gpk1: gpk1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -545,7 +545,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpk2: gpk2 {
+	gpk2: gpk2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -553,7 +553,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpk3: gpk3 {
+	gpk3: gpk3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -561,28 +561,28 @@
 		#interrupt-cells = <2>;
 	};
 
-	usb3_1_oc: usb3-1-oc {
+	usb3_1_oc: usb3-1-oc-pins {
 		samsung,pins = "gpk2-4", "gpk2-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	usb3_1_vbusctrl: usb3-1-vbusctrl {
+	usb3_1_vbusctrl: usb3-1-vbusctrl-pins {
 		samsung,pins = "gpk2-6", "gpk2-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	usb3_0_oc: usb3-0-oc {
+	usb3_0_oc: usb3-0-oc-pins {
 		samsung,pins = "gpk3-0", "gpk3-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	usb3_0_vbusctrl: usb3-0-vbusctrl {
+	usb3_0_vbusctrl: usb3-0-vbusctrl-pins {
 		samsung,pins = "gpk3-2", "gpk3-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
@@ -591,7 +591,7 @@
 };
 
 &pinctrl_2 {
-	gpv0: gpv0 {
+	gpv0: gpv0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -599,7 +599,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpv1: gpv1 {
+	gpv1: gpv1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -607,7 +607,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpv2: gpv2 {
+	gpv2: gpv2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -615,7 +615,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpv3: gpv3 {
+	gpv3: gpv3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -623,7 +623,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpv4: gpv4 {
+	gpv4: gpv4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -633,7 +633,7 @@
 };
 
 &pinctrl_3 {
-	gpz: gpz {
+	gpz: gpz-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -641,7 +641,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	audi2s0_bus: audi2s0-bus {
+	audi2s0_bus: audi2s0-bus-pins {
 		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
 				"gpz-4";
 		samsung,pin-function = <2>;
diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts
index 2a3ade77a2de..b8f953c41c73 100644
--- a/arch/arm/boot/dts/exynos5410-smdk5410.dts
+++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts
@@ -41,6 +41,19 @@
 		reg = <0x02037000 0x1000>;
 	};
 
+	vdd10_usb3: voltage-regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD10_USB3";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+	};
+
+	vdd33_usb3: voltage-regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD33_USB3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
 };
 
 &mmc_0 {
@@ -66,14 +79,14 @@
 };
 
 &pinctrl_0 {
-	srom_ctl: srom-ctl {
+	srom_ctl: srom-ctl-pins {
 		samsung,pins = "gpy0-3", "gpy0-4", "gpy0-5",
 			       "gpy1-0", "gpy1-1", "gpy1-2", "gpy1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	srom_ebi: srom-ebi {
+	srom_ebi: srom-ebi-pins {
 		samsung,pins = "gpy3-0", "gpy3-1", "gpy3-2", "gpy3-3",
 			       "gpy3-4", "gpy3-5", "gpy3-6", "gpy3-7",
 			       "gpy5-0", "gpy5-1", "gpy5-2", "gpy5-3",
@@ -121,3 +134,13 @@
 &serial_2 {
 	status = "okay";
 };
+
+&usbdrd3_0 {
+	vdd10-supply = <&vdd10_usb3>;
+	vdd33-supply = <&vdd33_usb3>;
+};
+
+&usbdrd3_1 {
+	vdd10-supply = <&vdd10_usb3>;
+	vdd33-supply = <&vdd33_usb3>;
+};
diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index 584ce62361b1..4d797a9abba4 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -189,7 +189,7 @@
 			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		pdma0: pdma@121a0000 {
+		pdma0: dma-controller@121a0000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x121a0000 0x1000>;
 			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
@@ -200,7 +200,7 @@
 			#dma-requests = <32>;
 		};
 
-		pdma1: pdma@121b0000 {
+		pdma1: dma-controller@121b0000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x121b0000 0x1000>;
 			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
index dfc7f14f5772..946b791faf85 100644
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -808,7 +808,7 @@
 };
 
 &pinctrl_0 {
-	s2mps11_irq: s2mps11-irq {
+	s2mps11_irq: s2mps11-irq-pins {
 		samsung,pins = "gpx3-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -825,3 +825,13 @@
 &usbdrd_dwc3_1 {
 	dr_mode = "host";
 };
+
+&usbdrd3_0 {
+	vdd10-supply = <&ldo11_reg>;
+	vdd33-supply = <&ldo9_reg>;
+};
+
+&usbdrd3_1 {
+	vdd10-supply = <&ldo11_reg>;
+	vdd33-supply = <&ldo9_reg>;
+};
diff --git a/arch/arm/boot/dts/exynos5420-chagall-wifi.dts b/arch/arm/boot/dts/exynos5420-chagall-wifi.dts
new file mode 100644
index 000000000000..1319344a2c74
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5420-chagall-wifi.dts
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos5420 Chagall WiFi board device tree source
+ *
+ * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2022 Henrik Grimler
+ */
+
+/dts-v1/;
+#include "exynos5420-galaxy-tab-common.dtsi"
+
+/ {
+	model = "Samsung Chagall WiFi based on Exynos5420";
+	compatible = "samsung,chagall-wifi", "samsung,exynos5420", \
+		     "samsung,exynos5";
+};
+
+&ldo15_reg {
+	/* Unused */
+	regulator-name = "VDD_LDO15";
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+};
+
+&ldo17_reg {
+	regulator-name = "VDD_IRLED_3V3";
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3350000>;
+	regulator-always-on;
+	regulator-boot-on;
+
+	regulator-state-mem {
+		regulator-off-in-suspend;
+	};
+};
+
+&ldo28_reg {
+	/* Unused */
+	regulator-name = "VDD_LDO28";
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+};
+
+&ldo29_reg {
+	regulator-name = "VDD_TCON_1V8";
+	regulator-min-microvolt = <1900000>;
+	regulator-max-microvolt = <1900000>;
+
+	regulator-state-mem {
+		regulator-off-in-suspend;
+	};
+};
+
+&ldo31_reg {
+	regulator-name = "VDD_GRIP_1V8";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+	regulator-boot-on;
+
+	regulator-state-mem {
+		regulator-off-in-suspend;
+	};
+};
+
+&ldo32_reg {
+	regulator-name = "VDD_TSP_1V8";
+	regulator-min-microvolt = <1900000>;
+	regulator-max-microvolt = <1900000>;
+
+	regulator-state-mem {
+		regulator-off-in-suspend;
+	};
+};
diff --git a/arch/arm/boot/dts/exynos5420-galaxy-tab-common.dtsi b/arch/arm/boot/dts/exynos5420-galaxy-tab-common.dtsi
new file mode 100644
index 000000000000..d19bc3d266fa
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5420-galaxy-tab-common.dtsi
@@ -0,0 +1,691 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Base DT for Samsung's family of tablets based on Exynos5420.
+ *
+ * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2022 Henrik Grimler
+ */
+
+/dts-v1/;
+#include "exynos5420.dtsi"
+#include "exynos5420-cpus.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/samsung,s2mps11.h>
+
+/ {
+	chassis-type = "tablet";
+
+	/*
+	 * To successfully boot the mainline kernel with the stock
+	 * bootloader (SBOOT), the tlb needs to be flushed after the
+	 * page table pointer has been updated in __common_mmu_cache_on.
+	 * The same hack is also needed to boot exynos4412-i9300 with
+	 * stock bootloader, and probably other Samsung devices of
+	 * similar age.  See
+	 * https://lore.kernel.org/all/1355276466-18295-1-git-send-email-arve@android.com
+	 * for more details.
+	 */
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0xc0000000>;
+	};
+
+	firmware@2073000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x02073000 0x1000>;
+	};
+
+	fixed-rate-clocks {
+		oscclk {
+			compatible = "samsung,exynos5420-oscclk";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+
+		key-power {
+			debounce-interval = <10>;
+			gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
+			label = "Power";
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		key-home {
+			debounce-interval = <10>;
+			gpios = <&gpx0 5 GPIO_ACTIVE_LOW>;
+			label = "Home";
+			linux,code = <KEY_HOME>;
+			wakeup-source;
+		};
+
+		key-volume-up {
+			debounce-interval = <10>;
+			gpios = <&gpx0 2 GPIO_ACTIVE_LOW>;
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		key-volume-down {
+			debounce-interval = <10>;
+			gpios = <&gpx0 3 GPIO_ACTIVE_LOW>;
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+};
+
+&cci {
+	/* CCI is disabled in hardware */
+	status = "disabled";
+};
+
+&cpu0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&cpu4 {
+	cpu-supply = <&buck6_reg>;
+};
+
+&gpu {
+	status = "okay";
+	mali-supply = <&buck4_reg>;
+};
+
+&hsi2c_7 {
+	status = "okay";
+
+	pmic@66 {
+		compatible = "samsung,s2mps11-pmic";
+		reg = <0x66>;
+
+		interrupt-parent = <&gpx3>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&s2mps11_irq>;
+
+		s2mps11_osc: clocks {
+			compatible = "samsung,s2mps11-clk";
+			#clock-cells = <1>;
+			clock-output-names = "s2mps11_ap", "s2mps11_cp",
+					     "s2mps11_bt";
+		};
+
+		regulators {
+			buck1_reg: BUCK1 {
+				regulator-name = "VDD_MIF_1V1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "VDD_ARM_1V0";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "VDD_INT_1V0";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "VDD_G3D_1V0";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "VDD_MEM_1V2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "VDD_KFC_1V0";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "VIN_LLDO_1V4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+			};
+
+			buck8_reg: BUCK8 {
+				regulator-name = "VIN_MLDO_2V0";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-always-on;
+			};
+
+			buck9_reg: BUCK9 {
+				regulator-name = "VIN_HLDO_3V5";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3500000>;
+				regulator-always-on;
+			};
+
+			buck10_reg: BUCK10 {
+				regulator-name = "VDD_CAM_ISP_1V0";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3550000>;
+			};
+
+			ldo1_reg: LDO1 {
+				regulator-name = "VDD_ALIVE_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "VDD_APIO_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "VDD_APIO_MMC01_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "VDD_ADC_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo5_reg: LDO5 {
+				/* Unused */
+				regulator-name = "VDD_LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "VDD_MIPI_1V0";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "VDD_MIPI_PLL_ABB1_18V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo8_reg: LDO8 {
+				/* Unused */
+				regulator-name = "VDD_LDO8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "VDD_UOTG_3V0";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "VDDQ_PRE_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "VDD_HSIC_1V0";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "VDD_HSIC_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "VDD_APIO_MMC2_2V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "VDD_MOTOR_3V0";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "VDD_LDO15";
+				/*
+				 * LDO15 varies between devices and is
+				 * specified in the device dts
+				 */
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "VDD_AP_2V8";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "VDD_LDO17";
+				/*
+				 * LDO17 varies between devices and is
+				 * specified in the device dts
+				 */
+			};
+
+			ldo18_reg: LDO18 {
+				/* Unused */
+				regulator-name = "VDD_LDO18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo19_reg: LDO19 {
+				regulator-name = "VDD_VTF_2V8";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo20_reg: LDO20 {
+				regulator-name = "VDD_CAM1_CAM_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo21_reg: LDO21 {
+				regulator-name = "VDD_CAM_IO_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo22_reg: LDO22 {
+				regulator-name = "VDD_CAM0_S_CORE_1V1";
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1200000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo23_reg: LDO23 {
+				regulator-name = "VDD_MIFS_1V1";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo24_reg: LDO24 {
+				regulator-name = "VDD_TSP_3V3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo25_reg: LDO25 {
+				/* Unused */
+				regulator-name = "VDD_LDO25";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo26_reg: LDO26 {
+				regulator-name = "VDD_CAM0_AF_2V8";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo27_reg: LDO27 {
+				regulator-name = "VDD_G3DS_1V0";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo28_reg: LDO28 {
+				regulator-name = "VDD_LDO28";
+				/*
+				 * LDO28 varies between devices and is
+				 * specified in the device dts
+				 */
+			};
+
+			ldo29_reg: LDO29 {
+				regulator-name = "VDD_LDO29";
+				/*
+				 * LDO29 varies between devices and is
+				 * specified in the device dts
+				 */
+			};
+
+			ldo30_reg: LDO30 {
+				regulator-name = "VDD_TOUCH_1V8";
+				regulator-min-microvolt = <1900000>;
+				regulator-max-microvolt = <1900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo31_reg: LDO31 {
+				regulator-name = "VDD_LDO31";
+				/*
+				 * LDO31 varies between devices and is
+				 * specified in the device dts
+				 */
+			};
+
+			ldo32_reg: LDO32 {
+				regulator-name = "VDD_LDO32";
+				/*
+				 * LDO32 varies between devices and is
+				 * specified in the device dts
+				 */
+			};
+
+			ldo33_reg: LDO33 {
+				regulator-name = "VDD_MHL_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo34_reg: LDO34 {
+				regulator-name = "VDD_MHL_3V3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo35_reg: LDO35 {
+				regulator-name = "VDD_SIL_1V2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo36_reg: LDO36 {
+				/* Unused */
+				regulator-name = "VDD_LDO36";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo37_reg: LDO37 {
+				/* Unused */
+				regulator-name = "VDD_LDO37";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo38_reg: LDO38 {
+				regulator-name = "VDD_KEY_LED_3V3";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&mixer {
+	status = "okay";
+};
+
+/* Internal storage */
+&mmc_0 {
+	status = "okay";
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	card-detect-delay = <200>;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
+	pinctrl-names = "default";
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	vqmmc-supply = <&ldo3_reg>;
+};
+
+/* External sdcard */
+&mmc_2 {
+	status = "okay";
+	bus-width = <4>;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	cd-gpios = <&gpx2 4 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&sd2_clk &sd2_cmd &mmc2_cd &sd2_bus1 &sd2_bus4>;
+	pinctrl-names = "default";
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	sd-uhs-sdr50;
+	vmmc-supply = <&ldo19_reg>;
+	vqmmc-supply = <&ldo13_reg>;
+};
+
+&pinctrl_0 {
+	mmc2_cd: mmc2-cd-pins {
+		samsung,pins = "gpx2-4";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	s2mps11_irq: s2mps11-irq-pins {
+		samsung,pins = "gpx3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&tmu_cpu0 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu1 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu2 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu3 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_gpu {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&usbdrd_dwc3_0 {
+	dr_mode = "peripheral";
+};
+
+&usbdrd_dwc3_1 {
+	dr_mode = "peripheral";
+};
+
+&usbdrd3_0 {
+	vdd33-supply = <&ldo9_reg>;
+	vdd10-supply = <&ldo11_reg>;
+};
+
+&usbdrd3_1 {
+	vdd33-supply = <&ldo9_reg>;
+	vdd10-supply = <&ldo11_reg>;
+};
diff --git a/arch/arm/boot/dts/exynos5420-klimt-wifi.dts b/arch/arm/boot/dts/exynos5420-klimt-wifi.dts
new file mode 100644
index 000000000000..011787b1bbf0
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5420-klimt-wifi.dts
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos5420 Klimt WiFi board device tree source
+ *
+ * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2022 Henrik Grimler
+ */
+
+/dts-v1/;
+#include "exynos5420-galaxy-tab-common.dtsi"
+
+/ {
+	model = "Samsung Klimt WiFi based on Exynos5420";
+	compatible = "samsung,klimt-wifi", "samsung,exynos5420", \
+		     "samsung,exynos5";
+};
+
+&ldo15_reg {
+	/* Unused */
+	regulator-name = "VDD_LDO15";
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+};
+
+&ldo17_reg {
+	regulator-name = "VDD_VCI_3V0";
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+
+	regulator-state-mem {
+		regulator-off-in-suspend;
+	};
+};
+
+&ldo28_reg {
+	regulator-name = "VDD3_1V8";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+
+	regulator-state-mem {
+		regulator-off-in-suspend;
+	};
+};
+
+&ldo29_reg {
+	regulator-name = "VDDR_1V6";
+	regulator-min-microvolt = <1600000>;
+	regulator-max-microvolt = <1600000>;
+
+	regulator-state-mem {
+		regulator-off-in-suspend;
+	};
+};
+
+&ldo31_reg {
+	/* Unused */
+	regulator-name = "VDD_LDO31";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+};
+
+&ldo32_reg {
+	regulator-name = "VDD_TSP_1V8";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+
+	regulator-state-mem {
+		regulator-off-in-suspend;
+	};
+};
+
+&mmc_2 {
+	sd-uhs-sdr104;
+};
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index e76fb104db19..d6434ec86022 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -212,7 +212,7 @@
 		interrupts = <1 IRQ_TYPE_NONE>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&max77802_irq>, <&pmic_selb>,
-			    <&pmic_dvs_1>, <&pmic_dvs_2>, <&pmic_dvs_3>;
+			    <&pmic_dvs_1>, <&pmic_dvs_2>;
 		wakeup-source;
 		reg = <0x9>;
 		#clock-cells = <1>;
@@ -774,14 +774,14 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&mask_tpm_reset>;
 
-	wifi_en: wifi-en {
+	wifi_en: wifi-en-pins {
 		samsung,pins = "gpx0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	max98090_irq: max98090-irq {
+	max98090_irq: max98090-irq-pins {
 		samsung,pins = "gpx0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -789,7 +789,7 @@
 	};
 
 	/* We need GPX0_6 to be low at sleep time; just keep it low always */
-	mask_tpm_reset: mask-tpm-reset {
+	mask_tpm_reset: mask-tpm-reset-pins {
 		samsung,pins = "gpx0-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -797,70 +797,70 @@
 		samsung,pin-val = <0>;
 	};
 
-	tpm_irq: tpm-irq {
+	tpm_irq: tpm-irq-pins {
 		samsung,pins = "gpx1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	trackpad_irq: trackpad-irq {
+	trackpad_irq: trackpad-irq-pins {
 		samsung,pins = "gpx1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	power_key_irq: power-key-irq {
+	power_key_irq: power-key-irq-pins {
 		samsung,pins = "gpx1-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	ec_irq: ec-irq {
+	ec_irq: ec-irq-pins {
 		samsung,pins = "gpx1-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	tps65090_irq: tps65090-irq {
+	tps65090_irq: tps65090-irq-pins {
 		samsung,pins = "gpx2-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	dp_hpd_gpio: dp_hpd_gpio {
+	dp_hpd_gpio: dp-hpd-gpio-pins {
 		samsung,pins = "gpx2-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	max77802_irq: max77802-irq {
+	max77802_irq: max77802-irq-pins {
 		samsung,pins = "gpx3-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	lid_irq: lid-irq {
+	lid_irq: lid-irq-pins {
 		samsung,pins = "gpx3-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	hdmi_hpd_irq: hdmi-hpd-irq {
+	hdmi_hpd_irq: hdmi-hpd-irq-pins {
 		samsung,pins = "gpx3-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	pmic_dvs_1: pmic-dvs-1 {
+	pmic_dvs_1: pmic-dvs-1-pins {
 		samsung,pins = "gpy7-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -868,74 +868,67 @@
 	};
 };
 
-&pinctrl_1 {
-	/* Adjust WiFi drive strengths lower for EMI */
-	sd1_clk: sd1-clk {
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
-	};
+/* pinctrl_1 */
+/* Adjust WiFi drive strengths lower for EMI */
+&sd1_bus1 {
+	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+};
 
-	sd1_cmd: sd1-cmd {
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
-	};
+&sd1_bus4 {
+	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+};
 
-	sd1_bus1: sd1-bus-width1 {
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
-	};
+&sd1_bus8 {
+	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+};
 
-	sd1_bus4: sd1-bus-width4 {
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
-	};
+&sd1_clk {
+	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+};
 
-	sd1_bus8: sd1-bus-width8 {
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
-	};
+&sd1_cmd {
+	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 };
 
 &pinctrl_2 {
-	pmic_dvs_2: pmic-dvs-2 {
-		samsung,pins = "gpj4-2";
+	pmic_dvs_2: pmic-dvs-2-pins {
+		samsung,pins = "gpj4-2", "gpj4-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
+};
 
-	pmic_dvs_3: pmic-dvs-3 {
-		samsung,pins = "gpj4-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
+/* pinctrl_3*/
+/* Drive SPI lines at x2 for better integrity */
+&spi2_bus {
+	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 };
 
 &pinctrl_3 {
-	/* Drive SPI lines at x2 for better integrity */
-	spi2-bus {
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
-	};
-
 	/* Drive SPI chip select at x2 for better integrity */
-	ec_spi_cs: ec-spi-cs {
+	ec_spi_cs: ec-spi-cs-pins {
 		samsung,pins = "gpb1-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 	};
 
-	usb300_vbus_en: usb300-vbus-en {
+	usb300_vbus_en: usb300-vbus-en-pins {
 		samsung,pins = "gph0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	usb301_vbus_en: usb301-vbus-en {
+	usb301_vbus_en: usb301-vbus-en-pins {
 		samsung,pins = "gph0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	pmic_selb: pmic-selb {
+	pmic_selb: pmic-selb-pins {
 		samsung,pins = "gph0-2", "gph0-3", "gph0-4", "gph0-5",
 			       "gph0-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
@@ -1090,6 +1083,16 @@
 	vtmu-supply = <&ldo10_reg>;
 };
 
+&usbdrd3_0 {
+	vdd10-supply = <&ldo15_reg>;
+	vdd33-supply = <&ldo12_reg>;
+};
+
+&usbdrd3_1 {
+	vdd10-supply = <&ldo15_reg>;
+	vdd33-supply = <&ldo12_reg>;
+};
+
 &usbdrd_dwc3_0 {
 	dr_mode = "host";
 };
diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
index b82af7c89654..546ba274f4e5 100644
--- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
@@ -12,7 +12,7 @@
 #include <dt-bindings/pinctrl/samsung.h>
 
 &pinctrl_0 {
-	gpy7: gpy7 {
+	gpy7: gpy7-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -20,7 +20,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx0: gpx0 {
+	gpx0: gpx0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -31,7 +31,7 @@
 			     <26 0>, <26 1>, <27 0>, <27 1>;
 	};
 
-	gpx1: gpx1 {
+	gpx1: gpx1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -42,7 +42,7 @@
 			     <30 0>, <30 1>, <31 0>, <31 1>;
 	};
 
-	gpx2: gpx2 {
+	gpx2: gpx2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -50,7 +50,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx3: gpx3 {
+	gpx3: gpx3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -58,14 +58,14 @@
 		#interrupt-cells = <2>;
 	};
 
-	dp_hpd: dp_hpd {
+	dp_hpd: dp-hpd-pins {
 		samsung,pins = "gpx0-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	hdmi_cec: hdmi-cec {
+	hdmi_cec: hdmi-cec-pins {
 		samsung,pins = "gpx3-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -74,7 +74,7 @@
 };
 
 &pinctrl_1 {
-	gpc0: gpc0 {
+	gpc0: gpc0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -82,7 +82,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc1: gpc1 {
+	gpc1: gpc1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -90,7 +90,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc2: gpc2 {
+	gpc2: gpc2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -98,7 +98,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc3: gpc3 {
+	gpc3: gpc3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -106,7 +106,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc4: gpc4 {
+	gpc4: gpc4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -114,7 +114,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd1: gpd1 {
+	gpd1: gpd1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -122,175 +122,175 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpy0: gpy0 {
+	gpy0: gpy0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy1: gpy1 {
+	gpy1: gpy1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy2: gpy2 {
+	gpy2: gpy2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy3: gpy3 {
+	gpy3: gpy3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy4: gpy4 {
+	gpy4: gpy4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy5: gpy5 {
+	gpy5: gpy5-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpy6: gpy6 {
+	gpy6: gpy6-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	sd0_clk: sd0-clk {
+	sd0_clk: sd0-clk-pins {
 		samsung,pins = "gpc0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd0_cmd: sd0-cmd {
+	sd0_cmd: sd0-cmd-pins {
 		samsung,pins = "gpc0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd0_cd: sd0-cd {
+	sd0_cd: sd0-cd-pins {
 		samsung,pins = "gpc0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd0_bus1: sd0-bus-width1 {
+	sd0_bus1: sd0-bus-width1-pins {
 		samsung,pins = "gpc0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd0_bus4: sd0-bus-width4 {
+	sd0_bus4: sd0-bus-width4-pins {
 		samsung,pins = "gpc0-4", "gpc0-5", "gpc0-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd0_bus8: sd0-bus-width8 {
+	sd0_bus8: sd0-bus-width8-pins {
 		samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd0_rclk: sd0-rclk {
+	sd0_rclk: sd0-rclk-pins {
 		samsung,pins = "gpc0-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd1_clk: sd1-clk {
+	sd1_clk: sd1-clk-pins {
 		samsung,pins = "gpc1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd1_cmd: sd1-cmd {
+	sd1_cmd: sd1-cmd-pins {
 		samsung,pins = "gpc1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd1_cd: sd1-cd {
+	sd1_cd: sd1-cd-pins {
 		samsung,pins = "gpc1-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd1_int: sd1-int {
+	sd1_int: sd1-int-pins {
 		samsung,pins = "gpd1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	sd1_bus1: sd1-bus-width1 {
+	sd1_bus1: sd1-bus-width1-pins {
 		samsung,pins = "gpc1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd1_bus4: sd1-bus-width4 {
+	sd1_bus4: sd1-bus-width4-pins {
 		samsung,pins = "gpc1-4", "gpc1-5", "gpc1-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd1_bus8: sd1-bus-width8 {
+	sd1_bus8: sd1-bus-width8-pins {
 		samsung,pins = "gpd1-4", "gpd1-5", "gpd1-6", "gpd1-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd2_clk: sd2-clk {
+	sd2_clk: sd2-clk-pins {
 		samsung,pins = "gpc2-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd2_cmd: sd2-cmd {
+	sd2_cmd: sd2-cmd-pins {
 		samsung,pins = "gpc2-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd2_cd: sd2-cd {
+	sd2_cd: sd2-cd-pins {
 		samsung,pins = "gpc2-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd2_bus1: sd2-bus-width1 {
+	sd2_bus1: sd2-bus-width1-pins {
 		samsung,pins = "gpc2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd2_bus4: sd2-bus-width4 {
+	sd2_bus4: sd2-bus-width4-pins {
 		samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
 	};
 
-	sd2_wp: sd2-wp {
+	sd2_wp: sd2-wp-pins {
 		samsung,pins = "gpc4-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
@@ -299,7 +299,7 @@
 };
 
 &pinctrl_2 {
-	gpe0: gpe0 {
+	gpe0: gpe0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -307,7 +307,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpe1: gpe1 {
+	gpe1: gpe1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -315,7 +315,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf0: gpf0 {
+	gpf0: gpf0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -323,7 +323,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf1: gpf1 {
+	gpf1: gpf1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -331,7 +331,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpg0: gpg0 {
+	gpg0: gpg0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -339,7 +339,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpg1: gpg1 {
+	gpg1: gpg1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -347,7 +347,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpg2: gpg2 {
+	gpg2: gpg2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -355,7 +355,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpj4: gpj4 {
+	gpj4: gpj4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -363,7 +363,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	cam_gpio_a: cam-gpio-a {
+	cam_gpio_a: cam-gpio-a-pins {
 		samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
 			       "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
 			       "gpe1-0", "gpe1-1";
@@ -372,7 +372,7 @@
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	cam_gpio_b: cam-gpio-b {
+	cam_gpio_b: cam-gpio-b-pins {
 		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
 			       "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -380,42 +380,42 @@
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	cam_i2c2_bus: cam-i2c2-bus {
+	cam_i2c2_bus: cam-i2c2-bus-pins {
 		samsung,pins = "gpf0-4", "gpf0-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	cam_spi1_bus: cam-spi1-bus {
+	cam_spi1_bus: cam-spi1-bus-pins {
 		samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	cam_i2c1_bus: cam-i2c1-bus {
+	cam_i2c1_bus: cam-i2c1-bus-pins {
 		samsung,pins = "gpf0-2", "gpf0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	cam_i2c0_bus: cam-i2c0-bus {
+	cam_i2c0_bus: cam-i2c0-bus-pins {
 		samsung,pins = "gpf0-0", "gpf0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	cam_spi0_bus: cam-spi0-bus {
+	cam_spi0_bus: cam-spi0-bus-pins {
 		samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	cam_bayrgb_bus: cam-bayrgb-bus {
+	cam_bayrgb_bus: cam-bayrgb-bus-pins {
 		samsung,pins = "gpg0-0", "gpg0-1", "gpg0-2", "gpg0-3",
 			       "gpg0-4", "gpg0-5", "gpg0-6", "gpg0-7",
 			       "gpg1-0", "gpg1-1", "gpg1-2", "gpg1-3",
@@ -428,7 +428,7 @@
 };
 
 &pinctrl_3 {
-	gpa0: gpa0 {
+	gpa0: gpa0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -436,7 +436,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpa1: gpa1 {
+	gpa1: gpa1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -444,7 +444,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpa2: gpa2 {
+	gpa2: gpa2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -452,7 +452,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb0: gpb0 {
+	gpb0: gpb0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -460,7 +460,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb1: gpb1 {
+	gpb1: gpb1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -468,7 +468,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb2: gpb2 {
+	gpb2: gpb2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -476,7 +476,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb3: gpb3 {
+	gpb3: gpb3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -484,7 +484,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb4: gpb4 {
+	gpb4: gpb4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -492,7 +492,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gph0: gph0 {
+	gph0: gph0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -500,98 +500,98 @@
 		#interrupt-cells = <2>;
 	};
 
-	uart0_data: uart0-data {
+	uart0_data: uart0-data-pins {
 		samsung,pins = "gpa0-0", "gpa0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	uart0_fctl: uart0-fctl {
+	uart0_fctl: uart0-fctl-pins {
 		samsung,pins = "gpa0-2", "gpa0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	uart1_data: uart1-data {
+	uart1_data: uart1-data-pins {
 		samsung,pins = "gpa0-4", "gpa0-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	uart1_fctl: uart1-fctl {
+	uart1_fctl: uart1-fctl-pins {
 		samsung,pins = "gpa0-6", "gpa0-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2c2_bus: i2c2-bus {
+	i2c2_bus: i2c2-bus-pins {
 		samsung,pins = "gpa0-6", "gpa0-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	uart2_data: uart2-data {
+	uart2_data: uart2-data-pins {
 		samsung,pins = "gpa1-0", "gpa1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	uart2_fctl: uart2-fctl {
+	uart2_fctl: uart2-fctl-pins {
 		samsung,pins = "gpa1-2", "gpa1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2c3_bus: i2c3-bus {
+	i2c3_bus: i2c3-bus-pins {
 		samsung,pins = "gpa1-2", "gpa1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	uart3_data: uart3-data {
+	uart3_data: uart3-data-pins {
 		samsung,pins = "gpa1-4", "gpa1-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	spi0_bus: spi0-bus {
+	spi0_bus: spi0-bus-pins {
 		samsung,pins = "gpa2-0", "gpa2-1", "gpa2-2", "gpa2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	spi1_bus: spi1-bus {
+	spi1_bus: spi1-bus-pins {
 		samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2c4_hs_bus: i2c4-hs-bus {
+	i2c4_hs_bus: i2c4-hs-bus-pins {
 		samsung,pins = "gpa2-0", "gpa2-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2c5_hs_bus: i2c5-hs-bus {
+	i2c5_hs_bus: i2c5-hs-bus-pins {
 		samsung,pins = "gpa2-2", "gpa2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2s1_bus: i2s1-bus {
+	i2s1_bus: i2s1-bus-pins {
 		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
 			       "gpb0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -599,7 +599,7 @@
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	pcm1_bus: pcm1-bus {
+	pcm1_bus: pcm1-bus-pins {
 		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
 			       "gpb0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -607,7 +607,7 @@
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2s2_bus: i2s2-bus {
+	i2s2_bus: i2s2-bus-pins {
 		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
 			       "gpb1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -615,7 +615,7 @@
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	pcm2_bus: pcm2-bus {
+	pcm2_bus: pcm2-bus-pins {
 		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
 			       "gpb1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -623,91 +623,91 @@
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	spdif_bus: spdif-bus {
+	spdif_bus: spdif-bus-pins {
 		samsung,pins = "gpb1-0", "gpb1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	spi2_bus: spi2-bus {
+	spi2_bus: spi2-bus-pins {
 		samsung,pins = "gpb1-1", "gpb1-3", "gpb1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2c6_hs_bus: i2c6-hs-bus {
+	i2c6_hs_bus: i2c6-hs-bus-pins {
 		samsung,pins = "gpb1-3", "gpb1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	pwm0_out: pwm0-out {
+	pwm0_out: pwm0-out-pins {
 		samsung,pins = "gpb2-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	pwm1_out: pwm1-out {
+	pwm1_out: pwm1-out-pins {
 		samsung,pins = "gpb2-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	pwm2_out: pwm2-out {
+	pwm2_out: pwm2-out-pins {
 		samsung,pins = "gpb2-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	pwm3_out: pwm3-out {
+	pwm3_out: pwm3-out-pins {
 		samsung,pins = "gpb2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2c7_hs_bus: i2c7-hs-bus {
+	i2c7_hs_bus: i2c7-hs-bus-pins {
 		samsung,pins = "gpb2-2", "gpb2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2c0_bus: i2c0-bus {
+	i2c0_bus: i2c0-bus-pins {
 		samsung,pins = "gpb3-0", "gpb3-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2c1_bus: i2c1-bus {
+	i2c1_bus: i2c1-bus-pins {
 		samsung,pins = "gpb3-2", "gpb3-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2c8_hs_bus: i2c8-hs-bus {
+	i2c8_hs_bus: i2c8-hs-bus-pins {
 		samsung,pins = "gpb3-4", "gpb3-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2c9_hs_bus: i2c9-hs-bus {
+	i2c9_hs_bus: i2c9-hs-bus-pins {
 		samsung,pins = "gpb3-6", "gpb3-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	i2c10_hs_bus: i2c10-hs-bus {
+	i2c10_hs_bus: i2c10-hs-bus-pins {
 		samsung,pins = "gpb4-0", "gpb4-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
@@ -716,7 +716,7 @@
 };
 
 &pinctrl_4 {
-	gpz: gpz {
+	gpz: gpz-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -724,7 +724,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	i2s0_bus: i2s0-bus {
+	i2s0_bus: i2s0-bus-pins {
 		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
 				"gpz-4", "gpz-5", "gpz-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
index a4f0e3ffedbd..4d7b6d9008a7 100644
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -124,6 +124,9 @@
 	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_hpd_irq>;
+	vdd-supply = <&ldo6_reg>;
+	vdd_osc-supply = <&ldo7_reg>;
+	vdd_pll-supply = <&ldo6_reg>;
 };
 
 &hsi2c_4 {
@@ -377,7 +380,7 @@
 };
 
 &pinctrl_0 {
-	hdmi_hpd_irq: hdmi-hpd-irq {
+	hdmi_hpd_irq: hdmi-hpd-irq-pins {
 		samsung,pins = "gpx3-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
@@ -386,14 +389,14 @@
 };
 
 &pinctrl_2 {
-	usb300_vbus_en: usb300-vbus-en {
+	usb300_vbus_en: usb300-vbus-en-pins {
 		samsung,pins = "gpg0-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	usb301_vbus_en: usb301-vbus-en {
+	usb301_vbus_en: usb301-vbus-en-pins {
 		samsung,pins = "gpg1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -407,6 +410,16 @@
 	clock-names = "rtc", "rtc_src";
 };
 
+&usbdrd3_0 {
+	vdd10-supply = <&ldo11_reg>;
+	vdd33-supply = <&ldo9_reg>;
+};
+
+&usbdrd3_1 {
+	vdd10-supply = <&ldo11_reg>;
+	vdd33-supply = <&ldo9_reg>;
+};
+
 &usbdrd_phy0 {
 	vbus-supply = <&usb300_vbus_reg>;
 };
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index e23e8ffb093f..21b608705049 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -302,8 +302,8 @@
 			clocks = <&clock CLK_PCLK_PPMU_DREX0_0>;
 			clock-names = "ppmu";
 			events {
-				ppmu_event3_dmc0_0: ppmu-event3-dmc0_0 {
-					event-name = "ppmu-event3-dmc0_0";
+				ppmu_event3_dmc0_0: ppmu-event3-dmc0-0 {
+					event-name = "ppmu-event3-dmc0-0";
 				};
 			};
 		};
@@ -314,8 +314,8 @@
 			clocks = <&clock CLK_PCLK_PPMU_DREX0_1>;
 			clock-names = "ppmu";
 			events {
-				ppmu_event3_dmc0_1: ppmu-event3-dmc0_1 {
-					event-name = "ppmu-event3-dmc0_1";
+				ppmu_event3_dmc0_1: ppmu-event3-dmc0-1 {
+					event-name = "ppmu-event3-dmc0-1";
 				};
 			};
 		};
@@ -326,8 +326,8 @@
 			clocks = <&clock CLK_PCLK_PPMU_DREX1_0>;
 			clock-names = "ppmu";
 			events {
-				ppmu_event3_dmc1_0: ppmu-event3-dmc1_0 {
-					event-name = "ppmu-event3-dmc1_0";
+				ppmu_event3_dmc1_0: ppmu-event3-dmc1-0 {
+					event-name = "ppmu-event3-dmc1-0";
 				};
 			};
 		};
@@ -338,8 +338,8 @@
 			clocks = <&clock CLK_PCLK_PPMU_DREX1_1>;
 			clock-names = "ppmu";
 			events {
-				ppmu_event3_dmc1_1: ppmu-event3-dmc1_1 {
-					event-name = "ppmu-event3-dmc1_1";
+				ppmu_event3_dmc1_1: ppmu-event3-dmc1-1 {
+					event-name = "ppmu-event3-dmc1-1";
 				};
 			};
 		};
@@ -430,7 +430,7 @@
 			power-domains = <&mau_pd>;
 		};
 
-		adma: adma@3880000 {
+		adma: dma-controller@3880000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x03880000 0x1000>;
 			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
@@ -442,7 +442,7 @@
 			power-domains = <&mau_pd>;
 		};
 
-		pdma0: pdma@121a0000 {
+		pdma0: dma-controller@121a0000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x121A0000 0x1000>;
 			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
@@ -453,7 +453,7 @@
 			#dma-requests = <32>;
 		};
 
-		pdma1: pdma@121b0000 {
+		pdma1: dma-controller@121b0000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x121B0000 0x1000>;
 			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
@@ -464,7 +464,7 @@
 			#dma-requests = <32>;
 		};
 
-		mdma0: mdma@10800000 {
+		mdma0: dma-controller@10800000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x10800000 0x1000>;
 			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
@@ -475,7 +475,7 @@
 			#dma-requests = <1>;
 		};
 
-		mdma1: mdma@11c10000 {
+		mdma1: dma-controller@11c10000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x11C10000 0x1000>;
 			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
index e7958dbecfd2..2f65dcf6ba73 100644
--- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
@@ -358,7 +358,7 @@
 		tCKESR-min-tck		= <2>;
 		tMRD-min-tck		= <5>;
 
-		timings_samsung_K3QF2F20DB_800mhz: lpddr3-timings@800000000 {
+		timings_samsung_K3QF2F20DB_800mhz: timings@800000000 {
 			compatible	= "jedec,lpddr3-timings";
 			/* workaround: 'reg' shows max-freq */
 			reg		= <800000000>;
@@ -999,7 +999,7 @@
 };
 
 &pinctrl_0 {
-	s2mps11_irq: s2mps11-irq {
+	s2mps11_irq: s2mps11-irq-pins {
 		samsung,pins = "gpx0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index e35af40a55cb..a6961ff24030 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -480,14 +480,14 @@
 };
 
 &pinctrl_0 {
-	power_key: power-key {
+	power_key: power-key-pins {
 		samsung,pins = "gpx0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	hdmi_hpd_irq: hdmi-hpd-irq {
+	hdmi_hpd_irq: hdmi-hpd-irq-pins {
 		samsung,pins = "gpx3-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
@@ -496,7 +496,7 @@
 };
 
 &pinctrl_1 {
-	emmc_nrst_pin: emmc-nrst {
+	emmc_nrst_pin: emmc-nrst-pins {
 		samsung,pins = "gpd1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index 77013ee586f8..4ee76281979c 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -221,7 +221,7 @@
 		interrupts = <1 IRQ_TYPE_NONE>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&max77802_irq>, <&pmic_selb>,
-			    <&pmic_dvs_1>, <&pmic_dvs_2>, <&pmic_dvs_3>;
+			    <&pmic_dvs_1>, <&pmic_dvs_2>;
 		wakeup-source;
 		reg = <0x9>;
 		#clock-cells = <1>;
@@ -756,14 +756,14 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&mask_tpm_reset>;
 
-	wifi_en: wifi-en {
+	wifi_en: wifi-en-pins {
 		samsung,pins = "gpx0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	max98091_irq: max98091-irq {
+	max98091_irq: max98091-irq-pins {
 		samsung,pins = "gpx0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -771,7 +771,7 @@
 	};
 
 	/* We need GPX0_6 to be low at sleep time; just keep it low always */
-	mask_tpm_reset: mask-tpm-reset {
+	mask_tpm_reset: mask-tpm-reset-pins {
 		samsung,pins = "gpx0-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -779,70 +779,70 @@
 		samsung,pin-val = <0>;
 	};
 
-	tpm_irq: tpm-irq {
+	tpm_irq: tpm-irq-pins {
 		samsung,pins = "gpx1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	trackpad_irq: trackpad-irq {
+	trackpad_irq: trackpad-irq-pins {
 		samsung,pins = "gpx1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	power_key_irq: power-key-irq {
+	power_key_irq: power-key-irq-pins {
 		samsung,pins = "gpx1-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	ec_irq: ec-irq {
+	ec_irq: ec-irq-pins {
 		samsung,pins = "gpx1-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	tps65090_irq: tps65090-irq {
+	tps65090_irq: tps65090-irq-pins {
 		samsung,pins = "gpx2-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	dp_hpd_gpio: dp_hpd_gpio {
+	dp_hpd_gpio: dp-hpd-gpio-pins {
 		samsung,pins = "gpx2-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	max77802_irq: max77802-irq {
+	max77802_irq: max77802-irq-pins {
 		samsung,pins = "gpx3-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	lid_irq: lid-irq {
+	lid_irq: lid-irq-pins {
 		samsung,pins = "gpx3-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	hdmi_hpd_irq: hdmi-hpd-irq {
+	hdmi_hpd_irq: hdmi-hpd-irq-pins {
 		samsung,pins = "gpx3-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	pmic_dvs_1: pmic-dvs-1 {
+	pmic_dvs_1: pmic-dvs-1-pins {
 		samsung,pins = "gpy7-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -850,74 +850,67 @@
 	};
 };
 
-&pinctrl_1 {
-	/* Adjust WiFi drive strengths lower for EMI */
-	sd1_clk: sd1-clk {
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
-	};
+/* pinctrl_1 */
+/* Adjust WiFi drive strengths lower for EMI */
+&sd1_bus1 {
+	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+};
 
-	sd1_cmd: sd1-cmd {
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
-	};
+&sd1_bus4 {
+	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+};
 
-	sd1_bus1: sd1-bus-width1 {
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
-	};
+&sd1_bus8 {
+	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+};
 
-	sd1_bus4: sd1-bus-width4 {
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
-	};
+&sd1_clk {
+	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+};
 
-	sd1_bus8: sd1-bus-width8 {
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
-	};
+&sd1_cmd {
+	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 };
 
 &pinctrl_2 {
-	pmic_dvs_2: pmic-dvs-2 {
-		samsung,pins = "gpj4-2";
+	pmic_dvs_2: pmic-dvs-2-pins {
+		samsung,pins = "gpj4-2", "gpj4-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
+};
 
-	pmic_dvs_3: pmic-dvs-3 {
-		samsung,pins = "gpj4-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
-		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
-	};
+/* pinctrl_3*/
+/* Drive SPI lines at x2 for better integrity */
+&spi2_bus {
+	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 };
 
 &pinctrl_3 {
-	/* Drive SPI lines at x2 for better integrity */
-	spi2-bus {
-		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
-	};
-
 	/* Drive SPI chip select at x2 for better integrity */
-	ec_spi_cs: ec-spi-cs {
+	ec_spi_cs: ec-spi-cs-pins {
 		samsung,pins = "gpb1-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 	};
 
-	usb300_vbus_en: usb300-vbus-en {
+	usb300_vbus_en: usb300-vbus-en-pins {
 		samsung,pins = "gph0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	usb301_vbus_en: usb301-vbus-en {
+	usb301_vbus_en: usb301-vbus-en-pins {
 		samsung,pins = "gph0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	pmic_selb: pmic-selb {
+	pmic_selb: pmic-selb-pins {
 		samsung,pins = "gph0-2", "gph0-3", "gph0-4", "gph0-5",
 			       "gph0-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
@@ -1072,6 +1065,16 @@
 	vtmu-supply = <&ldo10_reg>;
 };
 
+&usbdrd3_0 {
+	vdd10-supply = <&ldo15_reg>;
+	vdd33-supply = <&ldo12_reg>;
+};
+
+&usbdrd3_1 {
+	vdd10-supply = <&ldo15_reg>;
+	vdd33-supply = <&ldo12_reg>;
+};
+
 &usbdrd_dwc3_0 {
 	dr_mode = "host";
 };
diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts
index 8cbaf1c81174..3b609d987d88 100644
--- a/arch/arm/boot/dts/imx23-evk.dts
+++ b/arch/arm/boot/dts/imx23-evk.dts
@@ -79,7 +79,6 @@
 						MX23_PAD_LCD_RESET__GPIO_1_18
 						MX23_PAD_PWM3__GPIO_1_29
 						MX23_PAD_PWM4__GPIO_1_30
-						MX23_PAD_SSP1_DETECT__SSP1_DETECT
 					>;
 					fsl,drive-strength = <MXS_DRIVE_4mA>;
 					fsl,voltage = <MXS_VOLTAGE_HIGH>;
diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts
index 9e5651c7ea6b..6d7b044fec5b 100644
--- a/arch/arm/boot/dts/imx28-tx28.dts
+++ b/arch/arm/boot/dts/imx28-tx28.dts
@@ -338,7 +338,7 @@
 	};
 
 	ds1339: rtc@68 {
-		compatible = "mxim,ds1339";
+		compatible = "dallas,ds1339";
 		reg = <0x68>;
 		trickle-resistor-ohms = <250>;
 		trickle-diode-disable;
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 84d0176d5193..130b4145af82 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -110,6 +110,8 @@
 				interrupt-names = "bch";
 				clocks = <&clks 50>;
 				clock-names = "gpmi_io";
+				assigned-clocks = <&clks 13>;
+				assigned-clock-parents = <&clks 10>;
 				dmas = <&dma_apbh 4>;
 				dma-names = "rx-tx";
 				status = "disabled";
diff --git a/arch/arm/boot/dts/imx51-ts4800.dts b/arch/arm/boot/dts/imx51-ts4800.dts
index 6ecb83e7f336..85654d6baf28 100644
--- a/arch/arm/boot/dts/imx51-ts4800.dts
+++ b/arch/arm/boot/dts/imx51-ts4800.dts
@@ -102,7 +102,7 @@
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
-	rtc: m41t00@68 {
+	rtc: rtc@68 {
 		compatible = "st,m41t00";
 		reg = <0x68>;
 	};
diff --git a/arch/arm/boot/dts/imx53-m53menlo.dts b/arch/arm/boot/dts/imx53-m53menlo.dts
index 4f88e96d81dd..d5c68d1ea707 100644
--- a/arch/arm/boot/dts/imx53-m53menlo.dts
+++ b/arch/arm/boot/dts/imx53-m53menlo.dts
@@ -53,6 +53,31 @@
 		};
 	};
 
+	lvds-decoder {
+		compatible = "ti,ds90cf364a", "lvds-decoder";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_decoder_in: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_decoder_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+	};
+
 	panel {
 		compatible = "edt,etm0700g0dh6";
 		pinctrl-0 = <&pinctrl_display_gpio>;
@@ -61,7 +86,7 @@
 
 		port {
 			panel_in: endpoint {
-				remote-endpoint = <&lvds0_out>;
+				remote-endpoint = <&lvds_decoder_out>;
 			};
 		};
 	};
@@ -450,7 +475,7 @@
 			reg = <2>;
 
 			lvds0_out: endpoint {
-				remote-endpoint = <&panel_in>;
+				remote-endpoint = <&lvds_decoder_in>;
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi
index 81c2726a328a..8712e9851465 100644
--- a/arch/arm/boot/dts/imx53-tx53.dtsi
+++ b/arch/arm/boot/dts/imx53-tx53.dtsi
@@ -241,7 +241,7 @@
 	clock-frequency = <400000>;
 	status = "okay";
 
-	rtc1: ds1339@68 {
+	rtc1: rtc@68 {
 		compatible = "dallas,ds1339";
 		reg = <0x68>;
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/imx6dl-plym2m.dts b/arch/arm/boot/dts/imx6dl-plym2m.dts
index 60fe5f14666e..c4ce23d8ac9f 100644
--- a/arch/arm/boot/dts/imx6dl-plym2m.dts
+++ b/arch/arm/boot/dts/imx6dl-plym2m.dts
@@ -50,6 +50,11 @@
 		};
 	};
 
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&vdiv_vaccu>;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -101,6 +106,64 @@
 		regulator-min-microvolt = <12000000>;
 		regulator-max-microvolt = <12000000>;
 	};
+
+	thermal-zones {
+		chassis-thermal {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&tsens0>;
+		};
+
+		touch-thermal0 {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&touch_temp0>;
+		};
+
+		touch-thermal1 {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&touch_temp1>;
+		};
+	};
+
+	touchscreen {
+		compatible = "resistive-adc-touch";
+		io-channels = <&adc_ts 1>, <&adc_ts 3>, <&adc_ts 4>,
+                              <&adc_ts 5>;
+		io-channel-names = "y", "z1", "z2", "x";
+		touchscreen-min-pressure = <64687>;
+		touchscreen-inverted-x;
+		touchscreen-inverted-y;
+		touchscreen-x-plate-ohms = <300>;
+		touchscreen-y-plate-ohms = <800>;
+	};
+
+	touch_temp0: touch-temperature-sensor0 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&adc_ts 0>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <    (-40000) 736
+						85000 474>;
+	};
+
+	touch_temp1: touch-temperature-sensor1 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&adc_ts 7>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <    (-40000) 826
+						85000 609>;
+	};
+
+	vdiv_vaccu: voltage-divider-vaccu {
+		compatible = "voltage-divider";
+		io-channels = <&adc_ts 2>;
+		output-ohms = <2500>;
+		full-ohms = <64000>;
+		#io-channel-cells = <0>;
+	};
 };
 
 &can1 {
@@ -129,26 +192,61 @@
 	pinctrl-0 = <&pinctrl_ecspi2>;
 	status = "okay";
 
-	touchscreen@0 {
-		compatible = "ti,tsc2046";
+	adc_ts: adc@0 {
+		compatible = "ti,tsc2046e-adc";
 		reg = <0>;
 		pinctrl-0 = <&pinctrl_tsc2046>;
 		pinctrl-names ="default";
-		spi-max-frequency = <100000>;
-		interrupts-extended = <&gpio3 20 IRQ_TYPE_EDGE_FALLING>;
-		pendown-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>;
+		spi-max-frequency = <1000000>;
+		interrupts-extended = <&gpio3 20 IRQ_TYPE_LEVEL_LOW>;
+		#io-channel-cells = <1>;
 
-		touchscreen-inverted-x;
-		touchscreen-inverted-y;
-		touchscreen-max-pressure = <4095>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@0 {
+			reg = <0>;
+			settling-time-us = <300>;
+			oversampling-ratio = <5>;
+		};
 
-		ti,vref-delay-usecs = /bits/ 16 <100>;
-		ti,x-plate-ohms = /bits/ 16 <800>;
-		ti,y-plate-ohms = /bits/ 16 <300>;
-		ti,debounce-max = /bits/ 16 <3>;
-		ti,debounce-tol = /bits/ 16 <70>;
-		ti,debounce-rep = /bits/ 16 <3>;
-		wakeup-source;
+		channel@1 {
+			reg = <1>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@2 {
+			reg = <2>;
+			settling-time-us = <300>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@3 {
+			reg = <3>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@4 {
+			reg = <4>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@5 {
+			reg = <5>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		/* channel 6 is not connected */
+
+		channel@7 {
+			reg = <7>;
+			settling-time-us = <300>;
+			oversampling-ratio = <5>;
+		};
 	};
 };
 
@@ -233,9 +331,10 @@
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
 
-	temperature-sensor@70 {
+	tsens0: temperature-sensor@70 {
 		compatible = "ti,tmp103";
 		reg = <0x70>;
+		#thermal-sensor-cells = <0>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/imx6dl-prtvt7.dts b/arch/arm/boot/dts/imx6dl-prtvt7.dts
index 190d26642bc8..b86deebef7b7 100644
--- a/arch/arm/boot/dts/imx6dl-prtvt7.dts
+++ b/arch/arm/boot/dts/imx6dl-prtvt7.dts
@@ -6,6 +6,7 @@
 /dts-v1/;
 #include "imx6dl.dtsi"
 #include "imx6qdl-prti6q.dtsi"
+#include <dt-bindings/display/sdtv-standards.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/sound/fsl-imx-audmux.h>
@@ -28,6 +29,35 @@
 		power-supply = <&reg_bl_12v0>;
 	};
 
+	display {
+		compatible = "fsl,imx-parallel-display";
+		pinctrl-0 = <&pinctrl_ipu1_disp>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			display_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&vdiv_vaccu>;
+	};
+
 	keys {
 		compatible = "gpio-keys";
 		autorepeat;
@@ -135,6 +165,30 @@
 		};
 	};
 
+	panel {
+		compatible = "innolux,g070y2-t02";
+		backlight = <&backlight_lcd>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+
+	connector {
+		compatible = "composite-video-connector";
+		label = "Composite0";
+		sdtv-standards = <SDTV_STD_PAL_B>;
+
+		port {
+			comp0_out: endpoint {
+				remote-endpoint = <&tvp5150_comp0_in>;
+			};
+		};
+	};
+
 	reg_bl_12v0: regulator-bl-12v0 {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -146,6 +200,13 @@
 		enable-active-high;
 	};
 
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	reg_1v8: regulator-1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "1v8";
@@ -179,6 +240,64 @@
 			frame-master;
 		};
 	};
+
+	thermal-zones {
+		chassis-thermal {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&tsens0>;
+		};
+
+		touch-thermal0 {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&touch_temp0>;
+		};
+
+		touch-thermal1 {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&touch_temp1>;
+		};
+	};
+
+	touchscreen {
+		compatible = "resistive-adc-touch";
+		io-channels = <&adc_ts 1>, <&adc_ts 3>, <&adc_ts 4>,
+                              <&adc_ts 5>;
+		io-channel-names = "y", "z1", "z2", "x";
+		touchscreen-min-pressure = <64687>;
+		touchscreen-inverted-x;
+		touchscreen-inverted-y;
+		touchscreen-x-plate-ohms = <300>;
+		touchscreen-y-plate-ohms = <800>;
+	};
+
+	touch_temp0: touch-temperature-sensor0 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&adc_ts 0>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <    (-40000) 736
+						85000 474>;
+	};
+
+	touch_temp1: touch-temperature-sensor1 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&adc_ts 7>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <    (-40000) 826
+						85000 609>;
+	};
+
+	vdiv_vaccu: voltage-divider-vaccu {
+		compatible = "voltage-divider";
+		io-channels = <&adc_ts 2>;
+		output-ohms = <2500>;
+		full-ohms = <64000>;
+		#io-channel-cells = <0>;
+	};
 };
 
 &audmux {
@@ -221,22 +340,41 @@
 	pinctrl-0 = <&pinctrl_ecspi2>;
 	status = "okay";
 
-	touchscreen@0 {
-		compatible = "ti,tsc2046";
+	adc_ts: adc@0 {
+		compatible = "ti,tsc2046e-adc";
 		reg = <0>;
 		pinctrl-0 = <&pinctrl_tsc>;
 		pinctrl-names ="default";
-		spi-max-frequency = <100000>;
-		interrupts-extended = <&gpio3 20 IRQ_TYPE_EDGE_FALLING>;
-		pendown-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>;
-		touchscreen-max-pressure = <4095>;
-		ti,vref-delay-usecs = /bits/ 16 <100>;
-		ti,x-plate-ohms = /bits/ 16 <800>;
-		ti,y-plate-ohms = /bits/ 16 <300>;
-		ti,debounce-max = /bits/ 16 <3>;
-		ti,debounce-tol = /bits/ 16 <70>;
-		ti,debounce-rep = /bits/ 16 <3>;
-		wakeup-source;
+		spi-max-frequency = <1000000>;
+		interrupts-extended = <&gpio3 20 IRQ_TYPE_LEVEL_LOW>;
+		#io-channel-cells = <1>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@1 {
+			reg = <1>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@3 {
+			reg = <3>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@4 {
+			reg = <4>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@5 {
+			reg = <5>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
 	};
 };
 
@@ -252,6 +390,31 @@
 		VDDIO-supply = <&reg_3v3>;
 		VDDD-supply = <&reg_1v8>;
 	};
+
+	video@5c {
+		compatible = "ti,tvp5150";
+		reg = <0x5c>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			tvp5150_comp0_in: endpoint {
+				remote-endpoint = <&comp0_out>;
+			};
+		};
+
+		/* Output port 2 is video output pad */
+		port@2 {
+			reg = <2>;
+
+			tvp5151_to_ipu1_csi0_mux: endpoint {
+				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+			};
+		};
+	};
 };
 
 &i2c3 {
@@ -260,6 +423,12 @@
 		reg = <0x51>;
 	};
 
+	tsens0: temperature-sensor@70 {
+		compatible = "ti,tmp103";
+		reg = <0x70>;
+		#thermal-sensor-cells = <0>;
+	};
+
 	gpio_pca: gpio@74 {
 		compatible = "nxp,pca9539";
 		reg = <0x74>;
@@ -275,6 +444,14 @@
 	status = "okay";
 };
 
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display_in>;
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+	remote-endpoint = <&tvp5151_to_ipu1_csi0_mux>;
+};
+
 &pwm1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
diff --git a/arch/arm/boot/dts/imx6dl-victgo.dts b/arch/arm/boot/dts/imx6dl-victgo.dts
index d37ba4ed847d..227c952543d4 100644
--- a/arch/arm/boot/dts/imx6dl-victgo.dts
+++ b/arch/arm/boot/dts/imx6dl-victgo.dts
@@ -66,6 +66,11 @@
 		};
 	};
 
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&vdiv_vaccu>, <&vdiv_hitch_pos>;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -181,6 +186,72 @@
 			frame-master;
 		};
 	};
+
+	thermal-zones {
+		chassis-thermal {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&tsens0>;
+		};
+
+		touch-thermal0 {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&touch_temp0>;
+		};
+
+		touch-thermal1 {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&touch_temp1>;
+		};
+	};
+
+	touchscreen {
+		compatible = "resistive-adc-touch";
+		io-channels = <&adc_ts 1>, <&adc_ts 3>, <&adc_ts 4>,
+                              <&adc_ts 5>;
+		io-channel-names = "y", "z1", "z2", "x";
+		touchscreen-min-pressure = <64687>;
+		touchscreen-inverted-x;
+		touchscreen-inverted-y;
+		touchscreen-x-plate-ohms = <300>;
+		touchscreen-y-plate-ohms = <800>;
+	};
+
+	touch_temp0: touch-temperature-sensor0 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&adc_ts 0>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <    (-40000) 736
+						85000 474>;
+	};
+
+	touch_temp1: touch-temperature-sensor1 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&adc_ts 7>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <    (-40000) 826
+						85000 609>;
+	};
+
+	vdiv_vaccu: voltage-divider-vaccu {
+		compatible = "voltage-divider";
+		io-channels = <&adc_ts 2>;
+		output-ohms = <2500>;
+		full-ohms = <64000>;
+		#io-channel-cells = <0>;
+	};
+
+	vdiv_hitch_pos: voltage-divider-hitch-pos {
+		compatible = "voltage-divider";
+		io-channels = <&adc_ts 6>;
+		output-ohms = <3300>;
+		full-ohms = <13300>;
+		#io-channel-cells = <0>;
+	};
 };
 
 &audmux {
@@ -244,22 +315,41 @@
 	pinctrl-0 = <&pinctrl_ecspi2>;
 	status = "okay";
 
-	touchscreen@0 {
-		compatible = "ti,tsc2046";
+	adc_ts: adc@0 {
+		compatible = "ti,tsc2046e-adc";
 		reg = <0>;
-		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_touchscreen>;
-		spi-max-frequency = <200000>;
-		interrupts-extended = <&gpio5 8 IRQ_TYPE_EDGE_FALLING>;
-		pendown-gpio = <&gpio5 8 GPIO_ACTIVE_LOW>;
-		touchscreen-size-x = <800>;
-		touchscreen-size-y = <480>;
-		touchscreen-inverted-y;
-		touchscreen-max-pressure = <4095>;
-		ti,vref-delay-usecs = /bits/ 16 <100>;
-		ti,x-plate-ohms = /bits/ 16 <800>;
-		ti,y-plate-ohms = /bits/ 16 <300>;
-		wakeup-source;
+		pinctrl-names ="default";
+		spi-max-frequency = <1000000>;
+		interrupts-extended = <&gpio5 8 IRQ_TYPE_LEVEL_LOW>;
+		#io-channel-cells = <1>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@1 {
+			reg = <1>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@3 {
+			reg = <3>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@4 {
+			reg = <4>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@5 {
+			reg = <5>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
 	};
 };
 
@@ -446,9 +536,10 @@
 		reg = <0x51>;
 	};
 
-	temperature-sensor@70 {
+	tsens0: temperature-sensor@70 {
 		compatible = "ti,tmp103";
 		reg = <0x70>;
+		#thermal-sensor-cells = <0>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts
index 343364d3e4f7..8daef65d5bb3 100644
--- a/arch/arm/boot/dts/imx6q-tbs2910.dts
+++ b/arch/arm/boot/dts/imx6q-tbs2910.dts
@@ -159,7 +159,7 @@
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
 
-	rtc: ds1307@68 {
+	rtc: rtc@68 {
 		compatible = "dallas,ds1307";
 		reg = <0x68>;
 	};
diff --git a/arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi b/arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi
index dc89b554e694..fe72650295a5 100644
--- a/arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi
@@ -4,7 +4,10 @@
  * Copyright (C) 2018 Marek Vasut <marex@denx.de>
  */
 
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
 
 / {
 	chosen {
diff --git a/arch/arm/boot/dts/imx6qdl-mba6.dtsi b/arch/arm/boot/dts/imx6qdl-mba6.dtsi
index daf76345b179..f4dca20669d6 100644
--- a/arch/arm/boot/dts/imx6qdl-mba6.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-mba6.dtsi
@@ -17,6 +17,7 @@
 		mmc1 = &usdhc2;
 		/delete-property/ mmc2;
 		/delete-property/ mmc3;
+		rtc0 = &rtc0;
 	};
 
 	chosen {
@@ -39,18 +40,21 @@
 			label = "s6";
 			linux,code = <KEY_F6>;
 			gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
+			wakeup-source;
 		};
 
 		button2 {
 			label = "s7";
 			linux,code = <KEY_F7>;
 			gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
+			wakeup-source;
 		};
 
 		button3 {
 			label = "s8";
 			linux,code = <KEY_F8>;
 			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+			wakeup-source;
 		};
 	};
 
@@ -82,6 +86,8 @@
 
 	reg_pcie: regulator-pcie {
 		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_regpcie>;
 		regulator-name = "supply-pcie";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
@@ -392,7 +398,6 @@
 
 	pinctrl_hog: hoggrp {
 		fsl,pins = <
-			/* LCD.CONTRAST -> Rev 0100 only, not used on Rev.0200*/
 			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x0001b099
 
 			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x0001b099
@@ -433,8 +438,6 @@
 			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x001b0f0 /* #PCIE.WAKE */
 			MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x001b0f0 /* #PCIE.RST */
 			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x001b0f0 /* #PCIE.DIS */
-			/* HYS = 1, DSE = 110, PUE+PKE, SPEED = HIGH (11)*/
-			MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x00130f0 /* PCIE.PWR_EN */
 		>;
 	};
 
@@ -459,6 +462,13 @@
 		>;
 	};
 
+	pinctrl_regpcie: regpciegrp {
+		fsl,pins = <
+			/* HYS = 1, DSE = 110, PUE+PKE, SPEED = HIGH (11)*/
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x00130f0 /* PCIE.PWR_EN */
+		>;
+	};
+
 	pinctrl_uart2: uart2grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b099
diff --git a/arch/arm/boot/dts/imx6qdl-mba6a.dtsi b/arch/arm/boot/dts/imx6qdl-mba6a.dtsi
index a61f2705a340..df8fa169e9f6 100644
--- a/arch/arm/boot/dts/imx6qdl-mba6a.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-mba6a.dtsi
@@ -6,12 +6,6 @@
  * Author: Markus Niebel <Markus.Niebel@tq-group.com>
  */
 
-/ {
-	aliases {
-		rtc0 = &rtc0;
-	};
-};
-
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>, <&pinctrl_enet_fix>;
diff --git a/arch/arm/boot/dts/imx6qdl-mba6b.dtsi b/arch/arm/boot/dts/imx6qdl-mba6b.dtsi
index 9f9f7037c9e4..7d1cd7454c7f 100644
--- a/arch/arm/boot/dts/imx6qdl-mba6b.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-mba6b.dtsi
@@ -6,12 +6,6 @@
  * Author: Markus Niebel <Markus.Niebel@tq-group.com>
  */
 
-/ {
-	aliases {
-		rtc0 = &rtc0;
-	};
-};
-
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
@@ -19,8 +13,11 @@
 
 &i2c1 {
 	clock-frequency = <100000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_recovery>;
+	scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index f3236204cb5a..1f2ba6f6254e 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -205,6 +205,19 @@
 				regulator-always-on;
 			};
 		};
+
+		da9063_rtc: rtc {
+			compatible = "dlg,da9063-rtc";
+		};
+
+		da9063_wdog: watchdog {
+			compatible = "dlg,da9063-watchdog";
+		};
+
+		onkey {
+			compatible = "dlg,da9063-onkey";
+			status = "disabled";
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
index 94b254bfd054..28a805384668 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
@@ -116,6 +116,16 @@
 			dlg,use-sw-pm;
 		};
 
+		thermal {
+			compatible = "dlg,da9062-thermal";
+			status = "disabled";
+		};
+
+		gpio {
+			compatible = "dlg,da9062-gpio";
+			status = "disabled";
+		};
+
 		regulators {
 			vdd_arm: buck1 {
 				regulator-name = "vdd_arm";
diff --git a/arch/arm/boot/dts/imx6qdl-tqma6.dtsi b/arch/arm/boot/dts/imx6qdl-tqma6.dtsi
index 51a3a5392c95..344ea935c7da 100644
--- a/arch/arm/boot/dts/imx6qdl-tqma6.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-tqma6.dtsi
@@ -52,6 +52,13 @@
 		>;
 	};
 
+	pinctrl_i2c1_recovery: i2c1recoverygrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0x4001b899
+			MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27 0x4001b899
+		>;
+	};
+
 	pinctrl_i2c3: i2c3grp {
 		fsl,pins = <
 			MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b899
@@ -59,6 +66,13 @@
 		>;
 	};
 
+	pinctrl_i2c3_recovery: i2c3recoverygrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x4001b899
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b899
+		>;
+	};
+
 	pinctrl_pmic: pmicgrp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x1b099 /* PMIC irq */
diff --git a/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi b/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi
index bfb67da64b96..7dc3f0005b0f 100644
--- a/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi
@@ -4,6 +4,8 @@
  * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
  */
 
+#include <dt-bindings/gpio/gpio.h>
+
 &fec {
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
@@ -11,8 +13,11 @@
 };
 
 &i2c1 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_recovery>;
+	scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	clock-frequency = <100000>;
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/imx6qdl-tqma6b.dtsi b/arch/arm/boot/dts/imx6qdl-tqma6b.dtsi
index 49c472285c06..dd0925766440 100644
--- a/arch/arm/boot/dts/imx6qdl-tqma6b.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-tqma6b.dtsi
@@ -4,9 +4,14 @@
  * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
  */
 
+#include <dt-bindings/gpio/gpio.h>
+
 &i2c3 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_recovery>;
+	scl-gpios = <&gpio1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	clock-frequency = <100000>;
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi b/arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi
index 410972e1dca9..99ec7a838f8d 100644
--- a/arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi
@@ -85,7 +85,7 @@
 };
 
 &i2c3 {
-	rtc: mcp7940x@6f {
+	rtc: rtc@6f {
 		compatible = "microchip,mcp7940x";
 		reg = <0x6f>;
 	};
diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
index d07d8f83456d..ccfa8e320be6 100644
--- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
@@ -5,6 +5,8 @@
  * Author: Fabio Estevam <fabio.estevam@freescale.com>
  */
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
 	aliases {
 		backlight = &backlight;
@@ -226,6 +228,7 @@
 				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
 				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
 				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
 			>;
 		};
 
@@ -304,7 +307,7 @@
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	non-removable;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
index b9e305774fed..1ac7e13249d2 100644
--- a/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-vicut1.dtsi
@@ -126,15 +126,6 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
-	reg_h1_vbus: regulator-h1-vbus {
-		compatible = "regulator-fixed";
-		regulator-name = "h1-vbus";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
 	reg_otg_vbus: regulator-otg-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "otg-vbus";
@@ -212,6 +203,8 @@
 &can1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_can1>;
+	termination-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	termination-ohms = <150>;
 	status = "okay";
 };
 
@@ -492,7 +485,6 @@
 };
 
 &usbh1 {
-	vbus-supply = <&reg_h1_vbus>;
 	pinctrl-names = "default";
 	phy_type = "utmi";
 	dr_mode = "host";
diff --git a/arch/arm/boot/dts/imx6qp-sabresd.dts b/arch/arm/boot/dts/imx6qp-sabresd.dts
index 480e73183f6b..f69eec18d865 100644
--- a/arch/arm/boot/dts/imx6qp-sabresd.dts
+++ b/arch/arm/boot/dts/imx6qp-sabresd.dts
@@ -50,8 +50,12 @@
 	};
 };
 
+&vgen3_reg {
+	regulator-always-on;
+};
+
 &pcie {
-	status = "disabled";
+	status = "okay";
 };
 
 &sata {
diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
index ee645655090d..35861bbea94e 100644
--- a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
+++ b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
@@ -183,6 +183,27 @@
 	status = "okay";
 };
 
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	hdmi-transmitter@70 {
+		compatible = "nxp,tda998x";
+		reg = <0x70>;
+		interrupts-extended = <&gpio3 27 IRQ_TYPE_LEVEL_LOW>;
+
+		ports {
+			port {
+				hdmi: endpoint {
+					remote-endpoint = <&lcdc>;
+				};
+			};
+		};
+	};
+};
+
 &i2c4 { /* Onboard Motion sensors */
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c4>;
@@ -190,6 +211,18 @@
 	status = "disabled";
 };
 
+&lcdif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcd>;
+	status = "okay";
+
+	port {
+		lcdc: endpoint {
+			remote-endpoint = <&hdmi>;
+		};
+	};
+};
+
 &iomuxc {
 	pinctrl_bt_reg: btreggrp {
 		fsl,pins =
@@ -227,12 +260,53 @@
 			<MX6SX_PAD_GPIO1_IO02__I2C2_SCL		0x4001b8b1>;
 	};
 
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins =
+			<MX6SX_PAD_KEY_ROW4__I2C3_SDA			0x4001b8b1>,
+			<MX6SX_PAD_KEY_COL4__I2C3_SCL			0x4001b8b1>;
+	};
+
 	pinctrl_i2c4: i2c4grp {
 		fsl,pins =
 			<MX6SX_PAD_USB_H_DATA__I2C4_SDA		0x4001b8b1>,
 			<MX6SX_PAD_USB_H_STROBE__I2C4_SCL	0x4001b8b1>;
 	};
 
+	pinctrl_lcd: lcdgrp {
+		fsl,pins = <
+			MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22		0x4001b0b0
+			MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23		0x4001b0b0
+			MX6SX_PAD_LCD1_CLK__LCDIF1_CLK		0x4001b0b0
+			MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE		0x4001b0b0
+			MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC		0x4001b0b0
+			MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC		0x4001b0b0
+			MX6SX_PAD_LCD1_RESET__GPIO3_IO_27		0x4001b0b0
+		>;
+	};
+
+
 	pinctrl_uart1: uart1grp {
 		fsl,pins =
 			<MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX	0x1b0b1>,
diff --git a/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts b/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts
index 97686097a86e..92ac0edcb608 100644
--- a/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts
+++ b/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts
@@ -119,7 +119,7 @@
 	/delete-node/ codec@a;
 	/delete-node/ touchscreen@48;
 
-	rtc: mcp7940x@6f {
+	rtc: rtc@6f {
 		compatible = "microchip,mcp7940x";
 		reg = <0x6f>;
 	};
diff --git a/arch/arm/boot/dts/imx7-colibri-aster.dtsi b/arch/arm/boot/dts/imx7-colibri-aster.dtsi
index 139188eb9f40..b770fc937970 100644
--- a/arch/arm/boot/dts/imx7-colibri-aster.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri-aster.dtsi
@@ -103,7 +103,7 @@
 	};
 
 	/* M41T0M6 real time clock on carrier board */
-	rtc: m41t0m6@68 {
+	rtc: rtc@68 {
 		compatible = "st,m41t0";
 		reg = <0x68>;
 	};
diff --git a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
index 3caf450735d7..3b9df8c82ae3 100644
--- a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
@@ -129,7 +129,7 @@
 	};
 
 	/* M41T0M6 real time clock on carrier board */
-	rtc: m41t0m6@68 {
+	rtc: rtc@68 {
 		compatible = "st,m41t0";
 		reg = <0x68>;
 	};
diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
index 62b771c1d5a9..f1c60b0cb143 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -40,7 +40,7 @@
 
 		dailink_master: simple-audio-card,codec {
 			sound-dai = <&codec>;
-			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		};
 	};
 };
@@ -293,7 +293,7 @@
 		compatible = "fsl,sgtl5000";
 		#sound-dai-cells = <0>;
 		reg = <0x0a>;
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_sai1_mclk>;
 		VDDA-supply = <&reg_module_3v3_avdd>;
diff --git a/arch/arm/boot/dts/imx7-mba7.dtsi b/arch/arm/boot/dts/imx7-mba7.dtsi
index 49086c6b6a0a..3df6dff7734a 100644
--- a/arch/arm/boot/dts/imx7-mba7.dtsi
+++ b/arch/arm/boot/dts/imx7-mba7.dtsi
@@ -302,7 +302,7 @@
 	tlv320aic32x4: audio-codec@18 {
 		compatible = "ti,tlv320aic32x4";
 		reg = <0x18>;
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		clock-names = "mclk";
 		ldoin-supply = <&reg_audio_3v3>;
 		iov-supply = <&reg_audio_3v3>;
diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/imx7d-nitrogen7.dts
index e0751e6ba3c0..a31de900139d 100644
--- a/arch/arm/boot/dts/imx7d-nitrogen7.dts
+++ b/arch/arm/boot/dts/imx7d-nitrogen7.dts
@@ -288,7 +288,7 @@
 	codec: wm8960@1a {
 		compatible = "wlf,wm8960";
 		reg = <0x1a>;
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		clock-names = "mclk";
 		wlf,shared-lrclk;
 	};
diff --git a/arch/arm/boot/dts/imx7d-pico-hobbit.dts b/arch/arm/boot/dts/imx7d-pico-hobbit.dts
index 7b2198a9372c..d917dc4f2f22 100644
--- a/arch/arm/boot/dts/imx7d-pico-hobbit.dts
+++ b/arch/arm/boot/dts/imx7d-pico-hobbit.dts
@@ -31,7 +31,7 @@
 
 		dailink_master: simple-audio-card,codec {
 			sound-dai = <&sgtl5000>;
-			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		};
 	};
 };
@@ -41,7 +41,7 @@
 		#sound-dai-cells = <0>;
 		reg = <0x0a>;
 		compatible = "fsl,sgtl5000";
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_vref_1v8>;
 	};
diff --git a/arch/arm/boot/dts/imx7d-pico-pi.dts b/arch/arm/boot/dts/imx7d-pico-pi.dts
index 70bea95c06d8..f263e391e24c 100644
--- a/arch/arm/boot/dts/imx7d-pico-pi.dts
+++ b/arch/arm/boot/dts/imx7d-pico-pi.dts
@@ -31,7 +31,7 @@
 
 		dailink_master: simple-audio-card,codec {
 			sound-dai = <&sgtl5000>;
-			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		};
 	};
 };
@@ -41,7 +41,7 @@
 		#sound-dai-cells = <0>;
 		reg = <0x0a>;
 		compatible = "fsl,sgtl5000";
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_vref_1v8>;
 	};
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index 7813ef960f6e..f053f5122741 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -385,14 +385,14 @@
 	codec: wm8960@1a {
 		compatible = "wlf,wm8960";
 		reg = <0x1a>;
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		clock-names = "mclk";
 		wlf,shared-lrclk;
 		wlf,hp-cfg = <2 2 3>;
 		wlf,gpio-cfg = <1 3>;
 		assigned-clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_SRC>,
 				  <&clks IMX7D_PLL_AUDIO_POST_DIV>,
-				  <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+				  <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		assigned-clock-parents = <&clks IMX7D_PLL_AUDIO_POST_DIV>;
 		assigned-clock-rates = <0>, <884736000>, <12288000>;
 	};
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index b7735979b7e4..f8cba47536a0 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -113,6 +113,49 @@
 			      <0x31004000 0x2000>,
 			      <0x31006000 0x2000>;
 		};
+
+		pcie: pcie@33800000 {
+			compatible = "fsl,imx7d-pcie";
+			reg = <0x33800000 0x4000>,
+			      <0x4ff00000 0x80000>;
+			reg-names = "dbi", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			bus-range = <0x00 0xff>;
+			ranges = <0x81000000 0 0          0x4ff80000 0 0x00010000>, /* downstream I/O */
+				 <0x82000000 0 0x40000000 0x40000000 0 0x0ff00000>; /* non-prefetchable memory */
+			num-lanes = <1>;
+			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			/*
+			 * Reference manual lists pci irqs incorrectly
+			 * Real hardware ordering is same as imx6: D+MSI, C, B, A
+			 */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX7D_PCIE_CTRL_ROOT_CLK>,
+				 <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>,
+				 <&clks IMX7D_PCIE_PHY_ROOT_CLK>;
+			clock-names = "pcie", "pcie_bus", "pcie_phy";
+			assigned-clocks = <&clks IMX7D_PCIE_CTRL_ROOT_SRC>,
+					  <&clks IMX7D_PCIE_PHY_ROOT_SRC>;
+			assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_250M_CLK>,
+						 <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+
+			fsl,max-link-speed = <2>;
+			power-domains = <&pgc_pcie_phy>;
+			resets = <&src IMX7_RESET_PCIEPHY>,
+				 <&src IMX7_RESET_PCIE_CTRL_APPS_EN>,
+				 <&src IMX7_RESET_PCIE_CTRL_APPS_TURNOFF>;
+			reset-names = "pciephy", "apps", "turnoff";
+			fsl,imx7d-pcie-phy = <&pcie_phy>;
+			status = "disabled";
+		};
 	};
 };
 
@@ -162,49 +205,6 @@
 		fsl,stop-mode = <&gpr 0x10 4>;
 		status = "disabled";
 	};
-
-	pcie: pcie@33800000 {
-		compatible = "fsl,imx7d-pcie";
-		reg = <0x33800000 0x4000>,
-		      <0x4ff00000 0x80000>;
-		reg-names = "dbi", "config";
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-		bus-range = <0x00 0xff>;
-		ranges = <0x81000000 0 0          0x4ff80000 0 0x00010000>, /* downstream I/O */
-			 <0x82000000 0 0x40000000 0x40000000 0 0x0ff00000>; /* non-prefetchable memory */
-		num-lanes = <1>;
-		interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "msi";
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0x7>;
-		/*
-		 * Reference manual lists pci irqs incorrectly
-		 * Real hardware ordering is same as imx6: D+MSI, C, B, A
-		 */
-		interrupt-map = <0 0 0 1 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 0 2 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 0 3 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 0 4 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&clks IMX7D_PCIE_CTRL_ROOT_CLK>,
-			 <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>,
-			 <&clks IMX7D_PCIE_PHY_ROOT_CLK>;
-		clock-names = "pcie", "pcie_bus", "pcie_phy";
-		assigned-clocks = <&clks IMX7D_PCIE_CTRL_ROOT_SRC>,
-				  <&clks IMX7D_PCIE_PHY_ROOT_SRC>;
-		assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_250M_CLK>,
-					 <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
-
-		fsl,max-link-speed = <2>;
-		power-domains = <&pgc_pcie_phy>;
-		resets = <&src IMX7_RESET_PCIEPHY>,
-			 <&src IMX7_RESET_PCIE_CTRL_APPS_EN>,
-			 <&src IMX7_RESET_PCIE_CTRL_APPS_TURNOFF>;
-		reset-names = "pciephy", "apps", "turnoff";
-		fsl,imx7d-pcie-phy = <&pcie_phy>;
-		status = "disabled";
-	};
 };
 
 &ca_funnel_in_ports {
diff --git a/arch/arm/boot/dts/imx7s-warp.dts b/arch/arm/boot/dts/imx7s-warp.dts
index 4f1edef06c92..e8734d218b9d 100644
--- a/arch/arm/boot/dts/imx7s-warp.dts
+++ b/arch/arm/boot/dts/imx7s-warp.dts
@@ -75,7 +75,7 @@
 
 		dailink_master: simple-audio-card,codec {
 			sound-dai = <&codec>;
-			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+			clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		};
 	};
 };
@@ -232,7 +232,7 @@
 		#sound-dai-cells = <0>;
 		reg = <0x0a>;
 		compatible = "fsl,sgtl5000";
-		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_DIV>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_sai1_mclk>;
 		VDDA-supply = <&vgen4_reg>;
diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/imx7ulp.dtsi
index b7ea37ad4e55..bcec98b96411 100644
--- a/arch/arm/boot/dts/imx7ulp.dtsi
+++ b/arch/arm/boot/dts/imx7ulp.dtsi
@@ -259,7 +259,7 @@
 			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&pcc2 IMX7ULP_CLK_WDG1>;
 			assigned-clocks = <&pcc2 IMX7ULP_CLK_WDG1>;
-			assigned-clocks-parents = <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>;
+			assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>;
 			timeout-sec = <40>;
 		};
 
diff --git a/arch/arm/boot/dts/imxrt1050-pinfunc.h b/arch/arm/boot/dts/imxrt1050-pinfunc.h
new file mode 100644
index 000000000000..22c14a3262ad
--- /dev/null
+++ b/arch/arm/boot/dts/imxrt1050-pinfunc.h
@@ -0,0 +1,993 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (C) 2019
+ * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com>
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_IMXRT1050_PINFUNC_H
+#define _DT_BINDINGS_PINCTRL_IMXRT1050_PINFUNC_H
+
+#define IMX_PAD_SION	0x40000000
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+
+#define MXRT1050_IOMUXC_GPIO_EMC_00_SEMC_DA00				0x014 0x204 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_00_FLEXPWM4_PWM0_A			0x014 0x204 0x494 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_00_LPSPI2_SCK				0x014 0x204 0x500 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_00_XBAR_INOUT2				0x014 0x204 0x60C 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_00_FLEXIO1_D00				0x014 0x204 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_00_GPIO4_IO00				0x014 0x204 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_01_SEMC_DA01				0x018 0x208 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_01_FLEXPWM4_PWM0_B			0x018 0x208 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_01_LPSPI2_PCS0				0x018 0x208 0x4FC 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_01_XBAR_INOUT3				0x018 0x208 0x610 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_01_FLEXIO1_D01				0x018 0x208 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_01_GPIO4_IO01				0x018 0x208 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_02_SEMC_DA02				0x01C 0x20C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_02_FLEXPWM4_PWM1_A			0x01C 0x20C 0x498 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_02_LPSPI2_SDO				0x01C 0x20C 0x508 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_02_XBAR_INOUT4				0x01C 0x20C 0x614 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_02_FLEXIO1_D02				0x01C 0x20C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_02_GPIO4_IO02				0x01C 0x20C 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_03_SEMC_DA03				0x020 0x210 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_03_FLEXPWM4_PWM1_B			0x020 0x210 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_03_LPSPI2_SDI				0x020 0x210 0x504 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_03_XBAR_INOUT5				0x020 0x210 0x618 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_03_FLEXIO1_D03				0x020 0x210 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_03_GPIO4_IO03				0x020 0x210 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_04_SEMC_DA04				0x024 0x214 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_04_FLEXPWM4_PWM2_A			0x024 0x214 0x49C 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_04_SAI2_TX_DATA			0x024 0x214 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_04_XBAR_INOUT6				0x024 0x214 0x61C 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_04_FLEXIO1_D04				0x024 0x214 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_04_GPIO4_IO04				0x024 0x214 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_05_SEMC_DA05				0x028 0x218 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_05_FLEXPWM4_PWM2_B			0x028 0x218 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_05_SAI2_TX_SYNC			0x028 0x218 0x5C4 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_05_XBAR_INOUT7				0x028 0x218 0x620 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_05_FLEXIO1_D05				0x028 0x218 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_05_GPIO4_IO05				0x028 0x218 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_06_SEMC_DA06				0x02C 0x21C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_06_FLEXPWM2_PWM0_A			0x02C 0x21C 0x478 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_06_SAI2_TX_BCLK			0x02C 0x21C 0x5C0 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_06_XBAR_INOUT8				0x02C 0x21C 0x624 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_06_FLEXIO1_D06				0x02C 0x21C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_06_GPIO4_IO06				0x02C 0x21C 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_07_SEMC_DA07				0x030 0x220 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_07_FLEXPWM2_PWM0_B			0x030 0x220 0x488 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_07_SAI2_MCLK				0x030 0x220 0x5B0 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_07_XBAR_INOUT9				0x030 0x220 0x628 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_07_FLEXIO1_D07				0x030 0x220 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_07_GPIO4_IO07				0x030 0x220 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_08_SEMC_DM00				0x034 0x224 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_08_FLEXPWM2_PWM1_A			0x034 0x224 0x47C 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_08_SAI2_RX_DATA			0x034 0x224 0x5B8 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_08_XBAR_INOUT17			0x034 0x224 0x62C 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_08_FLEXIO1_D08				0x034 0x224 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_08_GPIO4_IO08				0x034 0x224 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_09_SEMC_ADDR00				0x038 0x228 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_09_FLEXPWM2_PWM1_B			0x038 0x228 0x48C 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_09_SAI2_RX_SYNC			0x038 0x228 0x5BC 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_09_FLEXCAN2_TX				0x038 0x228 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_09_FLEXIO1_D09				0x038 0x228 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_09_GPIO4_IO09				0x038 0x228 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_10_SEMC_ADDR01				0x03C 0x22C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_10_FLEXPWM2_PWM2_A			0x03C 0x22C 0x480 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_10_SAI2_RX_BCLK			0x03C 0x22C 0x5B4 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_10_FLEXCAN2_RX				0x03C 0x22C 0x450 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_10_FLEXIO1_D10				0x03C 0x22C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_10_GPIO4_IO10				0x03C 0x22C 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_11_SEMC_ADDR02				0x040 0x230 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_11_FLEXPWM2_PWM2_B			0x040 0x230 0x490 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_11_LPI2C4_SDA				0x040 0x230 0x4E8 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_11_USDHC2_RESET_B			0x040 0x230 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_11_FLEXIO1_D11				0x040 0x230 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_11_GPIO4_IO11				0x040 0x230 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_12_SEMC_ADDR03				0x044 0x234 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_12_XBAR_INOUT24			0x044 0x234 0x640 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_12_LPI2C4_SCL				0x044 0x234 0x4E4 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_12_USDHC2_WP				0x044 0x234 0x5D8 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_12_FLEXPWM1_PWM3_A			0x044 0x234 0x454 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_12_GPIO4_IO12				0x044 0x234 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_13_SEMC_ADDR04				0x048 0x238 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_13_XBAR_INOUT25			0x048 0x238 0x650 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_13_LPUART3_TXD				0x048 0x238 0x53C 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_13_MQS_RIGHT				0x048 0x238 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_13_FLEXPWM1_PWM3_B			0x048 0x238 0x464 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_13_GPIO4_IO13				0x048 0x238 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_14_SEMC_ADDR05				0x04C 0x23C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_14_XBAR_INOUT19			0x04C 0x23C 0x654 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_14_LPUART3_RXD				0x04C 0x23C 0x538 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_14_MQS_LEFT				0x04C 0x23C 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_14_LPSPI2_PCS1				0x04C 0x23C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_14_GPIO4_IO14				0x04C 0x23C 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_15_SEMC_ADDR06				0x050 0x240 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_15_XBAR_INOUT20			0x050 0x240 0x634 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_15_LPUART3_CTS_B			0x050 0x240 0x534 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_15_SPDIF_OUT				0x050 0x240 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_15_TMR3_TIMER0				0x050 0x240 0x57C 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_15_GPIO4_IO15				0x050 0x240 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_16_SEMC_ADDR07				0x054 0x244 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_16_XBAR_INOUT21			0x054 0x244 0x658 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_16_LPUART3_RTS_B			0x054 0x244 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_16_SPDIF_IN				0x054 0x244 0x5C8 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_16_TMR3_TIMER1				0x054 0x244 0x580 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_16_GPIO4_IO16				0x054 0x244 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_17_SEMC_ADDR08				0x058 0x248 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_17_FLEXPWM4_PWM3_A			0x058 0x248 0x4A0 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_17_LPUART4_CTS_B			0x058 0x248 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_17_FLEXCAN1_TX				0x058 0x248 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_17_TMR3_TIMER2				0x058 0x248 0x584 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_17_GPIO4_IO17				0x058 0x248 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_18_SEMC_ADDR09				0x05C 0x24C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_18_FLEXPWM4_PWM3_B			0x05C 0x24C 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_18_LPUART4_RTS_B			0x05C 0x24C 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_18_FLEXCAN1_RX				0x05C 0x24C 0x44C 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_18_TMR3_TIMER3				0x05C 0x24C 0x588 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_18_GPIO4_IO18				0x05C 0x24C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_18_SNVS_VIO_5_CTL			0x05C 0x24C 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_19_SEMC_ADDR11				0x060 0x250 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_19_FLEXPWM2_PWM3_A			0x060 0x250 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_19_LPUART4_TXD				0x060 0x250 0x544 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_19_ENET_RX_DATA01			0x060 0x250 0x438 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_19_TMR2_TIMER0				0x060 0x250 0x56C 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_19_GPIO4_IO19				0x060 0x250 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_19_SNVS_VIO_5				0x060 0x250 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_20_SEMC_ADDR12				0x064 0x254 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_20_FLEXPWM2_PWM3_B			0x064 0x254 0x484 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_20_LPUART4_RXD				0x064 0x254 0x540 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_20_ENET_RX_DATA00			0x064 0x254 0x434 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_20_TMR2_TIMER0				0x064 0x254 0x570 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_20_GPIO4_IO20				0x064 0x254 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_21_SEMC_BA0				0x068 0x258 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_21_FLEXPWM3_PWM3_A			0x068 0x258 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_21_LPI2C3_SDA				0x068 0x258 0x4E0 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_21_ENET_TX_DATA01			0x068 0x258 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_21_TMR2_TIMER2				0x068 0x258 0x574 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_21_GPIO4_IO21				0x068 0x258 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_22_SEMC_BA1				0x06C 0x25C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_22_FLEXPWM3_PWM3_B			0x06C 0x25C 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_22_LPI2C3_SCL				0x06C 0x25C 0x4DC 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_22_ENET_TX_DATA00			0x06C 0x25C 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_22_TMR2_TIMER3				0x06C 0x25C 0x578 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_22_GPIO4_IO22				0x06C 0x25C 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_23_SEMC_ADDR10				0x070 0x260 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_23_FLEXPWM1_PWM0_A			0x070 0x260 0x458 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_23_LPUART5_TXD				0x070 0x260 0x54C 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_23_ENET_RX_EN				0x070 0x260 0x43C 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_23_GPT1_CAPTURE2			0x070 0x260 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_23_GPIO4_IO23				0x070 0x260 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_24_SEMC_CAS				0x074 0x264 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_24_FLEXPWM1_PWM0_B			0x074 0x264 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_24_LPUART5_RXD				0x074 0x264 0x548 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_24_ENET_TX_EN				0x074 0x264 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_24_GPT1_CAPTURE1			0x074 0x264 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_24_GPIO4_IO24				0x074 0x264 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_25_SEMC_RAS				0x078 0x268 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_25_FLEXPWM1_PWM1_A			0x078 0x268 0x45C 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_25_LPUART6_TXD				0x078 0x268 0x554 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_25_ENET_TX_CLK				0x078 0x268 0x448 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_25_ENET_REF_CLK			0x078 0x268 0x42C 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_25_GPIO4_IO25				0x078 0x268 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_26_SEMC_CLK				0x07C 0x26C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_26_FLEXPWM1_PWM1_B			0x07C 0x26C 0x46C 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_26_LPUART6_RXD				0x07C 0x26C 0x550 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_26_ENET_RX_ER				0x07C 0x26C 0x440 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_26_FLEXIO1_D12				0x07C 0x26C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_26_GPIO4_IO26				0x07C 0x26C 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_27_SEMC_CKE				0x080 0x270 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_27_FLEXPWM1_PWM2_A			0x080 0x270 0x460 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_27_LPUART5_RTS_B			0x080 0x270 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_27_LPSPI1_SCK				0x080 0x270 0x4F0 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_27_FLEXIO1_D13				0x080 0x270 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_27_GPIO4_IO27				0x080 0x270 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_28_SEMC_WE				0x084 0x274 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_28_FLEXPWM1_PWM2_B			0x084 0x274 0x470 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_28_LPUART5_CTS_B			0x084 0x274 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_28_LPSPI1_SDO				0x084 0x274 0x4F8 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_28_FLEXIO1_D14				0x084 0x274 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_28_GPIO4_IO28				0x084 0x274 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_29_SEMC_CS0				0x088 0x278 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_29_FLEXPWM3_PWM0_A			0x088 0x278 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_29_LPUART6_RTS_B			0x088 0x278 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_29_LPSPI1_SDI				0x088 0x278 0x4F4 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_29_FLEXIO1_D15				0x088 0x278 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_29_GPIO4_IO29				0x088 0x278 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_30_SEMC_DA08				0x08C 0x27C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_30_FLEXPWM3_PWM0_B			0x08C 0x27C 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_30_LPUART6_CTS_B			0x08C 0x27C 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_30_LPSPI1_PCS0				0x08C 0x27C 0x4EC 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_30_CSI_DATA23				0x08C 0x27C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_30_GPIO4_IO30				0x08C 0x27C 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_31_SEMC_DA09				0x090 0x280 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_31_FLEXPWM3_PWM1_A			0x090 0x280 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_31_LPUART7_TXD				0x090 0x280 0x55C 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_31_LPSPI1_PCS1				0x090 0x280 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_31_CSI_DATA22				0x090 0x280 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_31_GPIO4_IO31				0x090 0x280 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_32_SEMC_DA10				0x094 0x284 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_32_FLEXPWM3_PWM1_B			0x094 0x284 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_32_LPUART7_RXD				0x094 0x284 0x558 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_32_CCM_PMIC_READY			0x094 0x284 0x3FC 0x3 0x4
+#define MXRT1050_IOMUXC_GPIO_EMC_32_CSI_DATA21				0x094 0x284 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_32_GPIO3_IO18				0x094 0x284 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_33_SEMC_DA11				0x098 0x288 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_33_FLEXPWM3_PWM2_A			0x098 0x288 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_33_USDHC1_RESET_B			0x098 0x288 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_33_SAI3_RX_DATA			0x098 0x288 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_33_CSI_DATA20				0x098 0x288 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_33_GPIO3_IO19				0x098 0x288 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_34_SEMC_DA12				0x09C 0x28C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_34_FLEXPWM3_PWM2_B			0x09C 0x28C 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_34_USDHC1_VSELECT			0x09C 0x28C 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_34_SAI3_RX_SYNC			0x09C 0x28C 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_34_CSI_DATA19				0x09C 0x28C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_34_GPIO3_IO20				0x09C 0x28C 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_35_SEMC_DA13				0x0A0 0x290 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_35_XBAR_INOUT18			0x0A0 0x290 0x630 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_35_GPT1_COMPARE1			0x0A0 0x290 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_35_SAI3_RX_BCLK			0x0A0 0x290 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_35_CSI_DATA18				0x0A0 0x290 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_35_GPIO3_IO21				0x0A0 0x290 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_35_USDHC1_CD_B				0x0A0 0x290 0x5D4 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_36_SEMC_DA14				0x0A4 0x294 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_36_XBAR_INOUT22			0x0A4 0x294 0x638 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_36_GPT1_COMPARE2			0x0A4 0x294 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_36_SAI3_TX_DATA			0x0A4 0x294 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_36_CSI_DATA17				0x0A4 0x294 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_36_GPIO3_IO22				0x0A4 0x294 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_36_USDHC1_WP				0x0A4 0x294 0x5D8 0x6 0x1
+
+#define MXRT1050_IOMUXC_GPIO_EMC_37_SEMC_DA15				0x0A8 0x298 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_37_XBAR_INOUT23			0x0A8 0x298 0x63C 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_37_GPT1_COMPARE3			0x0A8 0x298 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_37_SAI3_MCLK				0x0A8 0x298 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_37_CSI_DATA16				0x0A8 0x298 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_37_GPIO3_IO23				0x0A8 0x298 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_37_USDHC2_WP				0x0A8 0x298 0x608 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_38_SEMC_DM01				0x0AC 0x29C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_38_FLEXPWM1_PWM3_A			0x0AC 0x29C 0x454 0x1 0x2
+#define MXRT1050_IOMUXC_GPIO_EMC_38_LPUART8_TXD				0x0AC 0x29C 0x564 0x2 0x2
+#define MXRT1050_IOMUXC_GPIO_EMC_38_SAI3_TX_BCLK			0x0AC 0x29C 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_38_CSI_FIELD				0x0AC 0x29C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_38_GPIO3_IO24				0x0AC 0x29C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_38_USDHC2_VSELECT			0x0AC 0x29C 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_39_SEMC_DQS				0x0B0 0x2A0 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_39_FLEXPWM1_PWM3_B			0x0B0 0x2A0 0x464 0x1 0x2
+#define MXRT1050_IOMUXC_GPIO_EMC_39_LPUART8_RXD				0x0B0 0x2A0 0x560 0x2 0x2
+#define MXRT1050_IOMUXC_GPIO_EMC_39_SAI3_TX_SYNC			0x0B0 0x2A0 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_39_WDOG1_B				0x0B0 0x2A0 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_39_GPIO3_IO25				0x0B0 0x2A0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_39_USDHC2_CD_B				0x0B0 0x2A0 0x5E0 0x6 0x1
+
+#define MXRT1050_IOMUXC_GPIO_EMC_40_SEMC_RDY				0x0B4 0x2A4 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_40_GPT2_CAPTURE2			0x0B4 0x2A4 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_40_LPSPI1_PCS2				0x0B4 0x2A4 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_40_USB_OTG2_OC				0x0B4 0x2A4 0x5CC 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_40_ENET_MDC				0x0B4 0x2A4 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_40_GPIO3_IO26				0x0B4 0x2A4 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_40_USDHC2_RESET_B			0x0B4 0x2A4 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_EMC_41_SEMC_CSX0				0x0B8 0x2A8 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_41_GPT2_CAPTURE1			0x0B8 0x2A8 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_41_LPSPI1_PCS3				0x0B8 0x2A8 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_41_USB_OTG2_PWR			0x0B8 0x2A8 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_41_ENET_MDIO				0x0B8 0x2A8 0x430 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_EMC_41_GPIO3_IO27				0x0B8 0x2A8 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_EMC_41_USDHC2_VSELECT			0x0B8 0x2A8 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_00_FLEXPWM2_PWM3_A			0x0BC 0x2AC 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_00_XBAR_INOUT14			0x0BC 0x2AC 0x644 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_00_REF_CLK_32K			0x0BC 0x2AC 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_00_USB_OTG2_ID			0x0BC 0x2AC 0x3F8 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_00_LPI2C1_SCLS			0x0BC 0x2AC 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_00_GPIO1_IO00			0x0BC 0x2AC 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_00_USDHC1_RESET_B			0x0BC 0x2AC 0x000 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_00_LPSPI3_SCK			0x0BC 0x2AC 0x510 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_01_FLEXPWM2_PWM3_B			0x0C0 0x2B0 0x484 0x0 0x2
+#define MXRT1050_IOMUXC_GPIO_AD_B0_01_XBAR_INOUT15			0x0C0 0x2B0 0x648 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_01_REF_CLK_24M			0x0C0 0x2B0 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_01_USB_OTG1_ID			0x0C0 0x2B0 0x3F4 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_01_LPI2C1_SDAS			0x0C0 0x2B0 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_01_GPIO1_IO01			0x0C0 0x2B0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_01_EWM_OUT_B				0x0C0 0x2B0 0x000 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_01_LPSPI3_SDO			0x0C0 0x2B0 0x518 0x7 0x1
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_02_FLEXCAN2_TX			0x0C4 0x2B4 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_02_XBAR_INOUT16			0x0C4 0x2B4 0x64C 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_02_LPUART6_TXD			0x0C4 0x2B4 0x554 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_02_USB_OTG1_PWR			0x0C4 0x2B4 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_02_FLEXPWM1_PWM0_X			0x0C4 0x2B4 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_02_GPIO1_IO02			0x0C4 0x2B4 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_02_LPI2C1_HREQ			0x0C4 0x2B4 0x000 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_02_LPSPI3_SDI			0x0C4 0x2B4 0x514 0x7 0x1
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_03_FLEXCAN2_RX			0x0C8 0x2B8 0x450 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_03_XBAR_INOUT17			0x0C8 0x2B8 0x62C 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_03_LPUART6_RXD			0x0C8 0x2B8 0x550 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_03_USB_OTG1_OC			0x0C8 0x2B8 0x5D0 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_03_FLEXPWM1_PWM1_X			0x0C8 0x2B8 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_03_GPIO1_IO03			0x0C8 0x2B8 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_03_REF_CLK_24M			0x0C8 0x2B8 0x000 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_03_LPSPI3_PCS0			0x0C8 0x2B8 0x50C 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_04_SRC_BOOT_MODE00			0x0CC 0x2BC 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_04_MQS_RIGHT				0x0CC 0x2BC 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_04_ENET_TX_DATA03			0x0CC 0x2BC 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_04_SAI2_TX_SYNC			0x0CC 0x2BC 0x5C4 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_04_CSI_DATA09			0x0CC 0x2BC 0x41C 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_04_GPIO1_IO04			0x0CC 0x2BC 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_04_PIT_TRIGGER00			0x0CC 0x2BC 0x000 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_04_LPSPI3_PCS1			0x0CC 0x2BC 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_05_SRC_BOOT_MODE01			0x0D0 0x2C0 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_05_MQS_LEFT				0x0D0 0x2C0 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_05_ENET_TX_DATA02			0x0D0 0x2C0 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_05_SAI2_TX_BCLK			0x0D0 0x2C0 0x5C0 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_05_CSI_DATA08			0x0D0 0x2C0 0x418 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_05_GPIO1_IO05			0x0D0 0x2C0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_05_XBAR_INOUT17			0x0D0 0x2C0 0x62C 0x6 0x2
+#define MXRT1050_IOMUXC_GPIO_AD_B0_05_LPSPI3_PCS2			0x0D0 0x2C0 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_06_JTAG_TMS				0x0D4 0x2C4 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_06_GPT2_COMPARE1			0x0D4 0x2C4 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_06_ENET_RX_CLK			0x0D4 0x2C4 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_06_SAI2_RX_BCLK			0x0D4 0x2C4 0x5B4 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_06_CSI_DATA07			0x0D4 0x2C4 0x414 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_06_GPIO1_IO06			0x0D4 0x2C4 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_06_XBAR_INOUT18			0x0D4 0x2C4 0x630 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_06_LPSPI3_PCS3			0x0D4 0x2C4 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_07_JTAG_TCK				0x0D8 0x2C8 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_07_GPT2_COMPARE2			0x0D8 0x2C8 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_07_ENET_TX_ER			0x0D8 0x2C8 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_07_SAI2_RX_SYNC			0x0D8 0x2C8 0x5BC 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_07_CSI_DATA06			0x0D8 0x2C8 0x410 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_07_GPIO1_IO07			0x0D8 0x2C8 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_07_XBAR_INOUT19			0x0D8 0x2C8 0x654 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_07_ENET_1588_EVENT3_OUT		0x0D8 0x2C8 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_08_JTAG_MOD				0x0DC 0x2CC 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_08_GPT2_COMPARE3			0x0DC 0x2CC 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_08_ENET_RX_DATA03			0x0DC 0x2CC 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_08_SAI2_RX_DATA			0x0DC 0x2CC 0x5B8 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_08_CSI_DATA05			0x0DC 0x2CC 0x40C 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_08_GPIO1_IO08			0x0DC 0x2CC 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_08_XBAR_INOUT20			0x0DC 0x2CC 0x634 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_08_ENET_1588_EVENT3_IN		0x0DC 0x2CC 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_09_JTAG_TDI				0x0E0 0x2D0 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_09_FLEXPWM2_PWM3_A			0x0E0 0x2D0 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_09_ENET_RX_DATA02			0x0E0 0x2D0 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_09_SAI2_TX_DATA			0x0E0 0x2D0 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_09_CSI_DATA04			0x0E0 0x2D0 0x408 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_09_GPIO1_IO09			0x0E0 0x2D0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_09_XBAR_INOUT21			0x0E0 0x2D0 0x658 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_09_GPT2_CLK				0x0E0 0x2D0 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_10_JTAG_TDO				0x0E4 0x2D4 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_10_FLEXPWM1_PWM3_A			0x0E4 0x2D4 0x454 0x1 0x3
+#define MXRT1050_IOMUXC_GPIO_AD_B0_10_ENET_CRS				0x0E4 0x2D4 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_10_SAI2_MCLK				0x0E4 0x2D4 0x5B0 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_10_CSI_DATA03			0x0E4 0x2D4 0x404 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_10_GPIO1_IO10			0x0E4 0x2D4 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_10_XBAR_INOUT22			0x0E4 0x2D4 0x638 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_10_ENET_1588_EVENT0_OUT		0x0E4 0x2D4 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_11_JTAG_TRSTB			0x0E8 0x2D8 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_11_FLEXPWM1_PWM3_B			0x0E8 0x2D8 0x464 0x1 0x3
+#define MXRT1050_IOMUXC_GPIO_AD_B0_11_ENET_COL				0x0E8 0x2D8 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_11_WDOG1_B				0x0E8 0x2D8 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_11_CSI_DATA02			0x0E8 0x2D8 0x400 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_11_GPIO1_IO11			0x0E8 0x2D8 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_11_XBAR_INOUT23			0x0E8 0x2D8 0x63C 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_11_ENET_1588_EVENT0_IN		0x0E8 0x2D8 0x444 0x7 0x1
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_12_LPI2C4_SCL			0x0EC 0x2DC 0x4E4 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_12_CCM_PMIC_READY			0x0EC 0x2DC 0x3FC 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_12_LPUART1_TXD			0x0EC 0x2DC 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_12_WDOG2_B				0x0EC 0x2DC 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_12_FLEXPWM1_PWM2_X			0x0EC 0x2DC 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_12_GPIO1_IO12			0x0EC 0x2DC 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_12_ENET_1588_EVENT1_OUT		0x0EC 0x2DC 0x000 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_12_NMI				0x0EC 0x2DC 0x568 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_13_LPI2C4_SDA			0x0F0 0x2E0 0x4E8 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_13_GPT1_CLK				0x0F0 0x2E0 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_13_LPUART1_RXD			0x0F0 0x2E0 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_13_EWM_OUT_B				0x0F0 0x2E0 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_13_FLEXPWM1_PWM3_X			0x0F0 0x2E0 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_13_GPIO1_IO13			0x0F0 0x2E0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_13_ENET_1588_EVENT1_IN		0x0F0 0x2E0 0x000 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_13_REF_CLK_24M			0x0F0 0x2E0 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_14_USB_OTG2_OC			0x0F4 0x2E4 0x5CC 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_14_XBAR_INOUT24			0x0F4 0x2E4 0x640 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B0_14_LPUART1_CTS_B			0x0F4 0x2E4 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_14_ENET_1588_EVENT0_OUT		0x0F4 0x2E4 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_14_CSI_VSYNC				0x0F4 0x2E4 0x428 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_14_GPIO1_IO14			0x0F4 0x2E4 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_14_FLEXCAN2_TX			0x0F4 0x2E4 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B0_15_USB_OTG2_PWR			0x0F8 0x2E8 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_15_XBAR_INOUT25			0x0F8 0x2E8 0x650 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_15_LPUART1_RTS_B			0x0F8 0x2E8 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_15_ENET_1588_EVENT0_IN		0x0F8 0x2E8 0x444 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_15_CSI_HSYNC				0x0F8 0x2E8 0x420 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_15_GPIO1_IO15			0x0F8 0x2E8 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B0_15_FLEXCAN2_RX			0x0F8 0x2E8 0x450 0x6 0x2
+#define MXRT1050_IOMUXC_GPIO_AD_B0_15_WDOG1_WDOG_RST_B_DEB		0x0F8 0x2E8 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_00_USB_OTG2_ID			0x0FC 0x2EC 0x3F8 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_00_TMR3_TIMER0			0x0FC 0x2EC 0x57C 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_00_LPUART2_CTS_B			0x0FC 0x2EC 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_00_LPI2C1_SCL			0x0FC 0x2EC 0x4CC 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_00_WDOG1_B				0x0FC 0x2EC 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_00_GPIO1_IO16			0x0FC 0x2EC 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_00_USDHC1_WP				0x0FC 0x2EC 0x5D8 0x6 0x2
+#define MXRT1050_IOMUXC_GPIO_AD_B1_00_KPP_ROW07				0x0FC 0x2EC 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_01_USB_OTG1_PWR			0x100 0x2F0 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_01_TMR3_TIMER1			0x100 0x2F0 0x580 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_01_LPUART2_RTS_B			0x100 0x2F0 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_01_LPI2C1_SDA			0x100 0x2F0 0x4D0 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_01_CCM_PMIC_READY			0x100 0x2F0 0x3FC 0x4 0x2
+#define MXRT1050_IOMUXC_GPIO_AD_B1_01_GPIO1_IO17			0x100 0x2F0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_01_USDHC1_VSELECT			0x100 0x2F0 0x000 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_01_KPP_COL07				0x100 0x2F0 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_02_USB_OTG1_ID			0x104 0x2F4 0x3F4 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_02_TMR3_TIMER2			0x104 0x2F4 0x584 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_02_LPUART2_TXD			0x104 0x2F4 0x530 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_02_SPDIF_OUT				0x104 0x2F4 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_02_ENET_1588_EVENT2_OUT		0x104 0x2F4 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_02_GPIO1_IO18			0x104 0x2F4 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_02_USDHC1_CD_B			0x104 0x2F4 0x5D4 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_02_KPP_ROW06				0x104 0x2F4 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_03_USB_OTG1_OC			0x108 0x2F8 0x5D0 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_03_TMR3_TIMER3			0x108 0x2F8 0x588 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_03_LPUART2_RXD			0x108 0x2F8 0x52C 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_03_SPDIF_IN				0x108 0x2F8 0x5C8 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_03_ENET_1588_EVENT2_IN		0x108 0x2F8 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_03_GPIO1_IO19			0x108 0x2F8 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_03_USDHC2_CD_B			0x108 0x2F8 0x5E0 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_03_KPP_COL06				0x108 0x2F8 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_04_FLEXSPI_B_DATA3			0x10C 0x2FC 0x4C4 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_04_ENET_MDC				0x10C 0x2FC 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_04_LPUART3_CTS_B			0x10C 0x2FC 0x534 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_04_SPDIF_SR_CLK			0x10C 0x2FC 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_04_CSI_PIXCLK			0x10C 0x2FC 0x424 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_04_GPIO1_IO20			0x10C 0x2FC 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_04_USDHC2_DATA0			0x10C 0x2FC 0x5E8 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_04_KPP_ROW05				0x10C 0x2FC 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_05_FLEXSPI_B_DATA2			0x110 0x300 0x4C0 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_05_ENET_MDIO				0x110 0x300 0x430 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_05_LPUART3_RTS_B			0x110 0x300 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_05_SPDIF_OUT				0x110 0x300 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_05_CSI_MCLK				0x110 0x300 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_05_GPIO1_IO21			0x110 0x300 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_05_USDHC2_DATA1			0x110 0x300 0x5EC 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_05_KPP_COL05				0x110 0x300 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_06_FLEXSPI_B_DATA1			0x114 0x304 0x4BC 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_06_LPI2C3_SDA			0x114 0x304 0x4E0 0x1 0x2
+#define MXRT1050_IOMUXC_GPIO_AD_B1_06_LPUART3_TXD			0x114 0x304 0x53C 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_06_SPDIF_LOCK			0x114 0x304 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_06_CSI_VSYNC				0x114 0x304 0x428 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_06_GPIO1_IO22			0x114 0x304 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_06_USDHC2_DATA2			0x114 0x304 0x5F0 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_06_KPP_ROW04				0x114 0x304 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_07_FLEXSPI_B_DATA0			0x118 0x308 0x4B8 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_07_LPI2C3_SCL			0x118 0x308 0x4DC 0x1 0x2
+#define MXRT1050_IOMUXC_GPIO_AD_B1_07_LPUART3_RXD			0x118 0x308 0x538 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_07_SPDIF_EXT_CLK			0x118 0x308 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_07_CSI_HSYNC				0x118 0x308 0x420 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_07_GPIO1_IO23			0x118 0x308 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_07_USDHC2_DATA3			0x118 0x308 0x5F4 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_07_KPP_COL04				0x118 0x308 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_08_FLEXSPI_A_SS1_B			0x11C 0x30C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_08_FLEXPWM4_PWM0_A			0x11C 0x30C 0x494 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_08_FLEXCAN1_TX			0x11C 0x30C 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_08_CCM_PMIC_READY			0x11C 0x30C 0x3FC 0x3 0x3
+#define MXRT1050_IOMUXC_GPIO_AD_B1_08_CSI_DATA09			0x11C 0x30C 0x41C 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_08_GPIO1_IO24			0x11C 0x30C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_08_USDHC2_CMD			0x11C 0x30C 0x5E4 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_08_KPP_ROW03				0x11C 0x30C 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_09_FLEXSPI_A_DQS			0x120 0x310 0x4A4 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_09_FLEXPWM4_PWM1_A			0x120 0x310 0x498 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_09_FLEXCAN1_RX			0x120 0x310 0x44C 0x2 0x2
+#define MXRT1050_IOMUXC_GPIO_AD_B1_09_SAI1_MCLK				0x120 0x310 0x58C 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_09_CSI_DATA08			0x120 0x310 0x418 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_09_GPIO1_IO25			0x120 0x310 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_09_USDHC2_CLK			0x120 0x310 0x5DC 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_09_KPP_COL03				0x120 0x310 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_10_FLEXSPI_A_DATA3			0x124 0x314 0x4B4 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_10_WDOG1_B				0x124 0x314 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_10_LPUART8_TXD			0x124 0x314 0x564 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_10_SAI1_RX_SYNC			0x124 0x314 0x5A4 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_10_CSI_DATA07			0x124 0x314 0x414 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_10_GPIO1_IO26			0x124 0x314 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_10_USDHC2_WP				0x124 0x314 0x608 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_10_KPP_ROW02				0x124 0x314 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_11_FLEXSPI_A_DATA2			0x128 0x318 0x4B0 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_11_EWM_OUT_B				0x128 0x318 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_11_LPUART8_RXD			0x128 0x318 0x560 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_11_SAI1_RX_BCLK			0x128 0x318 0x590 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_11_CSI_DATA06			0x128 0x318 0x410 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_11_GPIO1_IO27			0x128 0x318 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_11_USDHC2_RESET_B			0x128 0x318 0x000 0x6 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_11_KPP_COL02				0x128 0x318 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_12_FLEXSPI_A_DATA1			0x12C 0x31C 0x4AC 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_12_ACMP1_OUT				0x12C 0x31C 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_12_LPSPI3_PCS0			0x12C 0x31C 0x50C 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_12_SAI1_RX_DATA00			0x12C 0x31C 0x594 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_12_CSI_DATA05			0x12C 0x31C 0x40C 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_12_GPIO1_IO28			0x12C 0x31C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_12_USDHC2_DATA4			0x12C 0x31C 0x5F8 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_12_KPP_ROW01				0x12C 0x31C 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_13_FLEXSPI_A_DATA0			0x130 0x320 0x4A8 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_13_ACMP2_OUT				0x130 0x320 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_13_LPSPI3_SDI			0x130 0x320 0x514 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_13_SAI1_TX_DATA00			0x130 0x320 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_13_CSI_DATA04			0x130 0x320 0x408 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_13_GPIO1_IO29			0x130 0x320 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_13_USDHC2_DATA5			0x130 0x320 0x5FC 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_13_KPP_COL01				0x130 0x320 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_14_FLEXSPI_A_SCLK			0x134 0x324 0x4C8 0x0 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_14_ACMP3_OUT				0x134 0x324 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_14_LPSPI3_SDO			0x134 0x324 0x518 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_14_SAI1_TX_BCLK			0x134 0x324 0x5A8 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_14_CSI_DATA03			0x134 0x324 0x404 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_14_GPIO1_IO30			0x134 0x324 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_14_USDHC2_DATA6			0x134 0x324 0x600 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_14_KPP_ROW00				0x134 0x324 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_AD_B1_15_FLEXSPI_A_SS0_B			0x138 0x328 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_15_ACMP4_OUT				0x138 0x328 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_15_LPSPI3_SCK			0x138 0x328 0x510 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_15_SAI1_TX_SYNC			0x138 0x328 0x5AC 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_15_CSI_DATA02			0x138 0x328 0x400 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_15_GPIO1_IO31			0x138 0x328 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_AD_B1_15_USDHC2_DATA7			0x138 0x328 0x604 0x6 0x1
+#define MXRT1050_IOMUXC_GPIO_AD_B1_15_KPP_COL00				0x138 0x328 0x000 0x7 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_00_LCD_CLK				0x13C 0x32C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_00_TMR1_TIMER0				0x13C 0x32C 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_00_MQS_RIGHT				0x13C 0x32C 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_00_LPSPI4_PCS0				0x13C 0x32C 0x51C 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_00_FLEXIO2_D00				0x13C 0x32C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_00_GPIO2_IO00				0x13C 0x32C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_00_SEMC_CSX1				0x13C 0x32C 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_01_LCD_ENABLE				0x140 0x330 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_01_TMR1_TIMER1				0x140 0x330 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_01_MQS_LEFT				0x140 0x330 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_01_LPSPI4_SDI				0x140 0x330 0x524 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_01_FLEXIO2_D01				0x140 0x330 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_01_GPIO2_IO01				0x140 0x330 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_01_SEMC_CSX2				0x140 0x330 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_02_LCD_HSYNC				0x144 0x334 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_02_TMR1_TIMER2				0x144 0x334 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_02_FLEXCAN1_TX				0x144 0x334 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_02_LPSPI4_SDO				0x144 0x334 0x528 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_02_FLEXIO2_D02				0x144 0x334 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_02_GPIO2_IO02				0x144 0x334 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_02_SEMC_CSX3				0x144 0x334 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_03_LCD_VSYNC				0x148 0x338 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_03_TMR2_TIMER0				0x148 0x338 0x56C 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_03_FLEXCAN1_RX				0x148 0x338 0x44C 0x2 0x3
+#define MXRT1050_IOMUXC_GPIO_B0_03_LPSPI4_SCK				0x148 0x338 0x520 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_03_FLEXIO2_D03				0x148 0x338 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_03_GPIO2_IO03				0x148 0x338 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_03_WDOG2_RESET_B_DEB			0x148 0x338 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_04_LCD_DATA00				0x14C 0x33C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_04_TMR2_TIMER1				0x14C 0x33C 0x570 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_04_LPI2C2_SCL				0x14C 0x33C 0x4D4 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_04_ARM_TRACE00				0x14C 0x33C 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_04_FLEXIO2_D04				0x14C 0x33C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_04_GPIO2_IO04				0x14C 0x33C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_04_SRC_BT_CFG00				0x14C 0x33C 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_05_LCD_DATA01				0x150 0x340 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_05_TMR2_TIMER2				0x150 0x340 0x574 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_05_LPI2C2_SDA				0x150 0x340 0x4D8 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_05_ARM_TRACE01				0x150 0x340 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_05_FLEXIO2_D05				0x150 0x340 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_05_GPIO2_IO05				0x150 0x340 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_05_SRC_BT_CFG01				0x150 0x340 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_06_LCD_DATA02				0x154 0x344 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_06_TMR3_TIMER0				0x154 0x344 0x57C 0x1 0x2
+#define MXRT1050_IOMUXC_GPIO_B0_06_FLEXPWM2_PWM0_A			0x154 0x344 0x478 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_06_ARM_TRACE02				0x154 0x344 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_06_FLEXIO2_D06				0x154 0x344 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_06_GPIO2_IO06				0x154 0x344 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_06_SRC_BT_CFG02				0x154 0x344 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_07_LCD_DATA03				0x158 0x348 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_07_TMR3_TIMER1				0x158 0x348 0x580 0x1 0x2
+#define MXRT1050_IOMUXC_GPIO_B0_07_FLEXPWM2_PWM0_B			0x158 0x348 0x488 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_07_ARM_TRACE03				0x158 0x348 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_07_FLEXIO2_D07				0x158 0x348 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_07_GPIO2_IO07				0x158 0x348 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_07_SRC_BT_CFG03				0x158 0x348 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_08_LCD_DATA04				0x15C 0x34C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_08_TMR3_TIMER2				0x15C 0x34C 0x584 0x1 0x2
+#define MXRT1050_IOMUXC_GPIO_B0_08_FLEXPWM2_PWM1_A			0x15C 0x34C 0x47C 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_08_LPUART3_TXD				0x15C 0x34C 0x53C 0x3 0x2
+#define MXRT1050_IOMUXC_GPIO_B0_08_FLEXIO2_D08				0x15C 0x34C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_08_GPIO2_IO08				0x15C 0x34C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_08_SRC_BT_CFG04				0x15C 0x34C 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_09_LCD_DATA05				0x160 0x350 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_09_TMR4_TIMER0				0x160 0x350 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_09_FLEXPWM2_PWM1_B			0x160 0x350 0x48C 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_09_LPUART3_RXD				0x160 0x350 0x538 0x3 0x2
+#define MXRT1050_IOMUXC_GPIO_B0_09_FLEXIO2_D09				0x160 0x350 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_09_GPIO2_IO09				0x160 0x350 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_09_SRC_BT_CFG05				0x160 0x350 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_10_LCD_DATA06				0x164 0x354 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_10_TMR4_TIMER1				0x164 0x354 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_10_FLEXPWM2_PWM2_A			0x164 0x354 0x480 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_10_SAI1_TX_DATA03			0x164 0x354 0x598 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_10_FLEXIO2_D10				0x164 0x354 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_10_GPIO2_IO10				0x164 0x354 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_10_SRC_BT_CFG06				0x164 0x354 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_11_LCD_DATA07				0x168 0x358 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_11_TMR4_TIMER2				0x168 0x358 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_11_FLEXPWM2_PWM2_B			0x168 0x358 0x490 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_11_SAI1_TX_DATA02			0x168 0x358 0x59C 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_11_FLEXIO2_D11				0x168 0x358 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_11_GPIO2_IO11				0x168 0x358 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_11_SRC_BT_CFG07				0x168 0x358 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_12_LCD_DATA08				0x16C 0x35C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_12_XBAR_INOUT10				0x16C 0x35C 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_12_ARM_TRACE_CLK			0x16C 0x35C 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_12_SAI1_TX_DATA01			0x16C 0x35C 0x5A0 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B0_12_FLEXIO2_D12				0x16C 0x35C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_12_GPIO2_IO12				0x16C 0x35C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_12_SRC_BT_CFG08				0x16C 0x35C 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_13_LCD_DATA09				0x170 0x360 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_13_XBAR_INOUT11				0x170 0x360 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_13_ARM_TRACE_SWO			0x170 0x360 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_13_SAI1_MCLK				0x170 0x360 0x58C 0x3 0x2
+#define MXRT1050_IOMUXC_GPIO_B0_13_FLEXIO2_D13				0x170 0x360 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_13_GPIO2_IO13				0x170 0x360 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_13_SRC_BT_CFG09				0x170 0x360 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_14_LCD_DATA10				0x174 0x364 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_14_XBAR_INOUT12				0x174 0x364 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_14_ARM_CM7_TXEV				0x174 0x364 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_14_SAI1_RX_SYNC				0x174 0x364 0x5A4 0x3 0x2
+#define MXRT1050_IOMUXC_GPIO_B0_14_FLEXIO2_D14				0x174 0x364 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_14_GPIO2_IO14				0x174 0x364 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_14_SRC_BT_CFG10				0x174 0x364 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B0_15_LCD_DATA11				0x178 0x368 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_15_XBAR_INOUT13				0x178 0x368 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_15_ARM_CM7_RXEV				0x178 0x368 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_15_SAI1_RX_BCLK				0x178 0x368 0x590 0x3 0x2
+#define MXRT1050_IOMUXC_GPIO_B0_15_FLEXIO2_D15				0x178 0x368 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_15_GPIO2_IO15				0x178 0x368 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B0_15_SRC_BT_CFG11				0x178 0x368 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B1_00_LCD_DATA12				0x17C 0x36C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_00_XBAR_INOUT14				0x17C 0x36C 0x644 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_00_LPUART4_TXD				0x17C 0x36C 0x544 0x2 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_00_SAI1_RX_DATA00			0x17C 0x36C 0x594 0x3 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_00_FLEXIO2_D16				0x17C 0x36C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_00_GPIO2_IO16				0x17C 0x36C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_00_FLEXPWM1_PWM3_A			0x17C 0x36C 0x454 0x6 0x4
+
+#define MXRT1050_IOMUXC_GPIO_B1_01_LCD_DATA13				0x180 0x370 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_01_XBAR_INOUT15				0x180 0x370 0x648 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_01_LPUART4_RXD				0x180 0x370 0x540 0x2 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_01_SAI1_TX_DATA00			0x180 0x370 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_01_FLEXIO2_D17				0x180 0x370 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_01_GPIO2_IO17				0x180 0x370 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_01_FLEXPWM1_PWM3_B			0x180 0x370 0x464 0x6 0x4
+
+#define MXRT1050_IOMUXC_GPIO_B1_02_LCD_DATA14				0x184 0x374 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_02_XBAR_INOUT16				0x184 0x374 0x64C 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_02_LPSPI4_PCS2				0x184 0x374 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_02_SAI1_TX_BCLK				0x184 0x374 0x5A8 0x3 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_02_FLEXIO2_D18				0x184 0x374 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_02_GPIO2_IO18				0x184 0x374 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_02_FLEXPWM2_PWM3_A			0x184 0x374 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B1_03_LCD_DATA15				0x188 0x378 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_03_XBAR_INOUT17				0x188 0x378 0x62C 0x1 0x3
+#define MXRT1050_IOMUXC_GPIO_B1_03_LPSPI4_PCS1				0x188 0x378 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_03_SAI1_TX_SYNC				0x188 0x378 0x5AC 0x3 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_03_FLEXIO2_D19				0x188 0x378 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_03_GPIO2_IO19				0x188 0x378 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_03_FLEXPWM2_PWM3_B			0x188 0x378 0x484 0x6 0x3
+
+#define MXRT1050_IOMUXC_GPIO_B1_04_LCD_DATA16				0x18C 0x37C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_04_LPSPI4_PCS0				0x18C 0x37C 0x51C 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_04_CSI_DATA15				0x18C 0x37C 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_04_ENET_RX_DATA00			0x18C 0x37C 0x434 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_04_FLEXIO2_D20				0x18C 0x37C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_04_GPIO2_IO20				0x18C 0x37C 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B1_05_LCD_DATA17				0x190 0x380 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_05_LPSPI4_SDI				0x190 0x380 0x524 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_05_CSI_DATA14				0x190 0x380 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_05_ENET_RX_DATA01			0x190 0x380 0x438 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_05_FLEXIO2_D21				0x190 0x380 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_05_GPIO2_IO21				0x190 0x380 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B1_06_LCD_DATA18				0x194 0x384 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_06_LPSPI4_SDO				0x194 0x384 0x528 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_06_CSI_DATA13				0x194 0x384 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_06_ENET_RX_EN				0x194 0x384 0x43C 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_06_FLEXIO2_D22				0x194 0x384 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_06_GPIO2_IO22				0x194 0x384 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B1_07_LCD_DATA19				0x198 0x388 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_07_LPSPI4_SCK				0x198 0x388 0x520 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_07_CSI_DATA12				0x198 0x388 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_07_ENET_TX_DATA00			0x198 0x388 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_07_FLEXIO2_D23				0x198 0x388 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_07_GPIO2_IO23				0x198 0x388 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B1_08_LCD_DATA20				0x19C 0x38C 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_08_TMR1_TIMER3				0x19C 0x38C 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_08_CSI_DATA11				0x19C 0x38C 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_08_ENET_TX_DATA01			0x19C 0x38C 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_08_FLEXIO2_D24				0x19C 0x38C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_08_GPIO2_IO24				0x19C 0x38C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_08_FLEXCAN2_TX				0x19C 0x38C 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B1_09_LCD_DATA21				0x1A0 0x390 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_09_TMR2_TIMER3				0x1A0 0x390 0x578 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_09_CSI_DATA10				0x1A0 0x390 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_09_ENET_TX_EN				0x1A0 0x390 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_09_FLEXIO2_D25				0x1A0 0x390 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_09_GPIO2_IO25				0x1A0 0x390 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_09_FLEXCAN2_RX				0x1A0 0x390 0x450 0x6 0x3
+
+#define MXRT1050_IOMUXC_GPIO_B1_10_LCD_DATA22				0x1A4 0x394 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_10_TMR3_TIMER3				0x1A4 0x394 0x588 0x1 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_10_CSI_DATA00				0x1A4 0x394 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_10_ENET_TX_CLK				0x1A4 0x394 0x448 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_10_FLEXIO2_D26				0x1A4 0x394 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_10_GPIO2_IO26				0x1A4 0x394 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_10_ENET_REF_CLK				0x1A4 0x394 0x42C 0x6 0x1
+
+#define MXRT1050_IOMUXC_GPIO_B1_11_LCD_DATA23				0x1A8 0x398 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_11_TMR4_TIMER3				0x1A8 0x398 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_11_CSI_DATA01				0x1A8 0x398 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_11_ENET_RX_ER				0x1A8 0x398 0x440 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_11_FLEXIO2_D27				0x1A8 0x398 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_11_GPIO2_IO27				0x1A8 0x398 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_11_LPSPI4_PCS3				0x1A8 0x398 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B1_12_LPUART5_TXD				0x1AC 0x39C 0x54C 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_12_CSI_PIXCLK				0x1AC 0x39C 0x424 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_12_ENET_1588_EVENT0_IN			0x1AC 0x39C 0x444 0x3 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_12_FLEXIO2_D28				0x1AC 0x39C 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_12_GPIO2_IO28				0x1AC 0x39C 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_12_USDHC1_CD_B				0x1AC 0x39C 0x5D4 0x6 0x2
+
+#define MXRT1050_IOMUXC_GPIO_B1_13_WDOG1_B				0x1B0 0x3A0 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_13_LPUART5_RXD				0x1B0 0x3A0 0x548 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_13_CSI_VSYNC				0x1B0 0x3A0 0x428 0x2 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_13_ENET_1588_EVENT0_OUT			0x1B0 0x3A0 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_13_FLEXIO2_D29				0x1B0 0x3A0 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_13_GPIO2_IO29				0x1B0 0x3A0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_13_USDHC1_WP				0x1B0 0x3A0 0x5D8 0x6 0x3
+
+#define MXRT1050_IOMUXC_GPIO_B1_14_ENET_MDC				0x1B4 0x3A4 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_14_FLEXPWM4_PWM2_A			0x1B4 0x3A4 0x49C 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_14_CSI_HSYNC				0x1B4 0x3A4 0x420 0x2 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_14_XBAR_INOUT02				0x1B4 0x3A4 0x60C 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_14_FLEXIO2_D30				0x1B4 0x3A4 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_14_GPIO2_IO30				0x1B4 0x3A4 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_14_USDHC1_VSELECT			0x1B4 0x3A4 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_B1_15_ENET_MDIO				0x1B8 0x3A8 0x430 0x0 0x2
+#define MXRT1050_IOMUXC_GPIO_B1_15_FLEXPWM4_PWM3_A			0x1B8 0x3A8 0x4A0 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_15_CSI_MCLK				0x1B8 0x3A8 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_15_XBAR_INOUT03				0x1B8 0x3A8 0x610 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_B1_15_FLEXIO2_D31				0x1B8 0x3A8 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_15_GPIO2_IO31				0x1B8 0x3A8 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_B1_15_USDHC1_RESET_B			0x1B8 0x3A8 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B0_00_USDHC1_CMD			0x1BC 0x3AC 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_00_FLEXPWM1_PWM0_A			0x1BC 0x3AC 0x458 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_00_LPI2C3_SCL			0x1BC 0x3AC 0x4DC 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_00_XBAR_INOUT04			0x1BC 0x3AC 0x614 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_00_LPSPI1_SCK			0x1BC 0x3AC 0x4F0 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_00_GPIO3_IO12			0x1BC 0x3AC 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_00_FLEXSPI_A_SS1_B			0x1BC 0x3AC 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B0_01_USDHC1_CLK			0x1C0 0x3B0 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_01_FLEXPWM1_PWM0_B			0x1C0 0x3B0 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_01_LPI2C3_SDA			0x1C0 0x3B0 0x4E0 0x2 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_01_XBAR_INOUT05			0x1C0 0x3B0 0x618 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_01_LPSPI1_PCS0			0x1C0 0x3B0 0x4EC 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_01_GPIO3_IO13			0x1C0 0x3B0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_01_FLEXSPI_B_SS1_B			0x1C0 0x3B0 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B0_02_USDHC1_DATA0			0x1C4 0x3B4 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_02_FLEXPWM1_PWM1_A			0x1C4 0x3B4 0x45C 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_02_LPUART8_CTS_B			0x1C4 0x3B4 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_02_XBAR_INOUT06			0x1C4 0x3B4 0x61C 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_02_LPSPI1_SDO			0x1C4 0x3B4 0x4F8 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_02_GPIO3_IO14			0x1C4 0x3B4 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B0_03_USDHC1_DATA1			0x1C8 0x3B8 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_03_FLEXPWM1_PWM1_B			0x1C8 0x3B8 0x46C 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_03_LPUART8_RTS_B			0x1C8 0x3B8 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_03_XBAR_INOUT07			0x1C8 0x3B8 0x620 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_03_LPSPI1_SDI			0x1C8 0x3B8 0x4F4 0x4 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_03_GPIO3_IO15			0x1C8 0x3B8 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B0_04_USDHC1_DATA2			0x1CC 0x3BC 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_04_FLEXPWM1_PWM2_A			0x1CC 0x3BC 0x460 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_04_LPUART8_TXD			0x1CC 0x3BC 0x564 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_04_XBAR_INOUT08			0x1CC 0x3BC 0x624 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_04_FLEXSPI_B_SS0_B			0x1CC 0x3BC 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_04_GPIO3_IO16			0x1CC 0x3BC 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_04_CCM_CLKO1				0x1CC 0x3BC 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B0_05_USDHC1_DATA3			0x1D0 0x3C0 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_05_FLEXPWM1_PWM2_B			0x1D0 0x3C0 0x470 0x1 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_05_LPUART8_RXD			0x1D0 0x3C0 0x560 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_05_XBAR_INOUT09			0x1D0 0x3C0 0x628 0x3 0x1
+#define MXRT1050_IOMUXC_GPIO_SD_B0_05_FLEXSPI_B_DQS			0x1D0 0x3C0 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_05_GPIO3_IO17			0x1D0 0x3C0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B0_05_CCM_CLKO2				0x1D0 0x3C0 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_00_USDHC2_DATA3			0x1D4 0x3C4 0x5F4 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_00_FLEXSPI_B_DATA3			0x1D4 0x3C4 0x4C4 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_00_FLEXPWM1_PWM3_A			0x1D4 0x3C4 0x454 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_00_SAI1_TX_DATA03			0x1D4 0x3C4 0x598 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_00_LPUART4_TXD			0x1D4 0x3C4 0x544 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_00_GPIO3_IO00			0x1D4 0x3C4 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_01_USDHC2_DATA2			0x1D8 0x3C8 0x5F0 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_01_FLEXSPI_B_DATA2			0x1D8 0x3C8 0x4C0 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_01_FLEXPWM1_PWM3_B			0x1D8 0x3C8 0x464 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_01_SAI1_TX_DATA02			0x1D8 0x3C8 0x59C 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_01_LPUART4_RXD			0x1D8 0x3C8 0x540 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_01_GPIO3_IO01			0x1D8 0x3C8 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_02_USDHC2_DATA1			0x1DC 0x3CC 0x5EC 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_02_FLEXSPI_B_DATA1			0x1DC 0x3CC 0x4BC 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_02_FLEXPWM2_PWM3_A			0x1DC 0x3CC 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_02_SAI1_TX_DATA01			0x1DC 0x3CC 0x5A0 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_02_FLEXCAN1_TX			0x1DC 0x3CC 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_02_GPIO3_IO02			0x1DC 0x3CC 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_02_CCM_WAIT				0x1DC 0x3CC 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_03_USDHC2_DATA0			0x1E0 0x3D0 0x5E8 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_03_FLEXSPI_B_DATA0			0x1E0 0x3D0 0x4B8 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_03_FLEXPWM2_PWM3_B			0x1E0 0x3D0 0x484 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_03_SAI1_MCLK				0x1E0 0x3D0 0x58C 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_03_FLEXCAN1_RX			0x1E0 0x3D0 0x44C 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_03_GPIO3_IO03			0x1E0 0x3D0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_03_CCM_PMIC_READY			0x1E0 0x3D0 0x3FC 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_04_USDHC2_CLK			0x1E4 0x3D4 0x5DC 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_04_FLEXSPI_B_SCLK			0x1E4 0x3D4 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_04_LPI2C1_SCL			0x1E4 0x3D4 0x4CC 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_04_SAI1_RX_SYNC			0x1E4 0x3D4 0x5A4 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_04_FLEXCAN1_A_SS1_B			0x1E4 0x3D4 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_04_GPIO3_IO04			0x1E4 0x3D4 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_04_CCM_STOP				0x1E4 0x3D4 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_05_USDHC2_CMD			0x1E8 0x3D8 0x5E4 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_05_FLEXSPI_A_DQS			0x1E8 0x3D8 0x4A4 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_05_LPI2C1_SDA			0x1E8 0x3D8 0x4D0 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_05_SAI1_RX_BCLK			0x1E8 0x3D8 0x590 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_05_FLEXCAN1_B_SS0_B			0x1E8 0x3D8 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_05_GPIO3_IO05			0x1E8 0x3D8 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_06_USDHC2_RESET_B			0x1EC 0x3DC 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_06_FLEXSPI_A_SS0_B			0x1EC 0x3DC 0x000 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_06_LPUART7_CTS_B			0x1EC 0x3DC 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_06_SAI1_RX_DATA00			0x1EC 0x3DC 0x594 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_06_LPSPI2_PCS0			0x1EC 0x3DC 0x4FC 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_06_GPIO3_IO06			0x1EC 0x3DC 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_07_SEMC_CSX1				0x1F0 0x3E0 0x000 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_07_FLEXSPI_A_SCLK			0x1F0 0x3E0 0x4C8 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_07_LPUART7_RTS_B			0x1F0 0x3E0 0x000 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_07_SAI1_TX_DATA00			0x1F0 0x3E0 0x000 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_07_LPSPI2_SCK			0x1F0 0x3E0 0x500 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_07_GPIO3_IO07			0x1F0 0x3E0 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_07_CCM_REF_EN_B			0x1F0 0x3E0 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_08_USDHC2_DATA4			0x1F4 0x3E4 0x5F8 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_08_FLEXSPI_A_DATA0			0x1F4 0x3E4 0x4A8 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_08_LPUART7_TXD			0x1F4 0x3E4 0x55C 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_08_SAI1_TX_BLCK			0x1F4 0x3E4 0x5A8 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_08_LPSPI2_SDO			0x1F4 0x3E4 0x508 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_08_GPIO3_IO08			0x1F4 0x3E4 0x000 0x5 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_08_SEMC_CSX2				0x1F4 0x3E4 0x000 0x6 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_09_USDHC2_DATA5			0x1F8 0x3E8 0x5FC 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_09_FLEXSPI_A_DATA1			0x1F8 0x3E8 0x4AC 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_09_LPUART7_RXD			0x1F8 0x3E8 0x558 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_09_SAI1_TX_SYNC			0x1F8 0x3E8 0x5AC 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_09_LPSPI2_SDI			0x1F8 0x3E8 0x504 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_09_GPIO3_IO09			0x1F8 0x3E8 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_10_USDHC2_DATA6			0x1FC 0x3EC 0x600 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_10_FLEXSPI_A_DATA2			0x1FC 0x3EC 0x4B0 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_10_LPUART2_RXD			0x1FC 0x3EC 0x52C 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_10_LPI2C2_SDA			0x1FC 0x3EC 0x4D8 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_10_LPSPI2_PCS2			0x1FC 0x3EC 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_10_GPIO3_IO10			0x1FC 0x3EC 0x000 0x5 0x0
+
+#define MXRT1050_IOMUXC_GPIO_SD_B1_11_USDHC2_DATA7			0x200 0x3F0 0x604 0x0 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_11_FLEXSPI_A_DATA3			0x200 0x3F0 0x4B4 0x1 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_11_LPUART2_TXD			0x200 0x3F0 0x530 0x2 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_11_LPI2C2_SCL			0x200 0x3F0 0x4D4 0x3 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_11_LPSPI2_PCS3			0x200 0x3F0 0x000 0x4 0x0
+#define MXRT1050_IOMUXC_GPIO_SD_B1_11_GPIO3_IO11			0x200 0x3F0 0x000 0x5 0x0
+
+#endif /* _DT_BINDINGS_PINCTRL_IMXRT1050_PINFUNC_H */
diff --git a/arch/arm/boot/dts/intel-ixp42x-gateway-7001.dts b/arch/arm/boot/dts/intel-ixp42x-gateway-7001.dts
index a1c03c965f17..b7cbc90e1c18 100644
--- a/arch/arm/boot/dts/intel-ixp42x-gateway-7001.dts
+++ b/arch/arm/boot/dts/intel-ixp42x-gateway-7001.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: ISC
 /*
- * Device Tree file for Gateway 7001 AP
+ * Device Tree file for Gateway 7001 AP based on IXP422
  * Derived from boardfiles written by Imre Kaloz
  */
 
@@ -29,7 +29,6 @@
 	aliases {
 		/* second UART is the primary console */
 		serial0 = &uart1;
-		serial1 = &uart0;
 	};
 
 	soc {
diff --git a/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v2.dts b/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v1.dts
index a57009436ed8..df2ca6d95ee5 100644
--- a/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v2.dts
+++ b/arch/arm/boot/dts/intel-ixp42x-netgear-wg302v1.dts
@@ -10,26 +10,26 @@
 #include <dt-bindings/input/input.h>
 
 / {
-	model = "Netgear WG302 v2";
-	compatible = "netgear,wg302v2", "intel,ixp42x";
+	model = "Netgear WG302 v1";
+	compatible = "netgear,wg302v1", "intel,ixp42x";
 	#address-cells = <1>;
 	#size-cells = <1>;
 
 	memory@0 {
-		/* 16 MB SDRAM according to OpenWrt database */
+		/* 32 MB SDRAM according to boot arguments */
 		device_type = "memory";
-		reg = <0x00000000 0x01000000>;
+		reg = <0x00000000 0x02000000>;
 	};
 
 	chosen {
-		bootargs = "console=ttyS0,115200n8 root=/dev/sda1 rw rootwait";
-		stdout-path = "uart1:115200n8";
+		/* The RedBoot comes up in 9600 baud so let's keep this */
+		bootargs = "console=ttyS0,9600n8";
+		stdout-path = "uart1:9600n8";
 	};
 
 	aliases {
 		/* These are switched around */
 		serial0 = &uart1;
-		serial1 = &uart0;
 	};
 
 	soc {
@@ -38,18 +38,17 @@
 				compatible = "intel,ixp4xx-flash", "cfi-flash";
 				bank-width = <2>;
 				/*
-				 * 32 MB of Flash in 128 0x20000 sized blocks
-				 * mapped in at CS0 and CS1
+				 * 8 MB of Flash in 64 0x20000 sized blocks
+				 * mapped in at CS0.
 				 */
-				reg = <0 0x00000000 0x2000000>;
+				reg = <0 0x00000000 0x800000>;
 
 				/* Configure expansion bus to allow writes */
 				intel,ixp4xx-eb-write-enable = <1>;
 
 				partitions {
 					compatible = "redboot-fis";
-					/* CHECKME: guess this is Redboot FIS */
-					fis-index-block = <0xff>;
+					fis-index-block = <0x3f>;
 				};
 			};
 		};
@@ -82,14 +81,14 @@
 			queue-rx = <&qmgr 3>;
 			queue-txready = <&qmgr 20>;
 			phy-mode = "rgmii";
-			phy-handle = <&phy8>;
+			phy-handle = <&phy30>;
 
 			mdio {
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				phy8: ethernet-phy@8 {
-					reg = <8>;
+				phy30: ethernet-phy@30 {
+					reg = <30>;
 				};
 			};
 		};
diff --git a/arch/arm/boot/dts/intel-ixp42x.dtsi b/arch/arm/boot/dts/intel-ixp42x.dtsi
index d0e0f8afb7c9..84cee8ec3ab8 100644
--- a/arch/arm/boot/dts/intel-ixp42x.dtsi
+++ b/arch/arm/boot/dts/intel-ixp42x.dtsi
@@ -9,7 +9,7 @@
 	soc {
 		bus@c4000000 {
 			compatible = "intel,ixp42x-expansion-bus-controller", "syscon";
-			reg = <0xc4000000 0x28>;
+			reg = <0xc4000000 0x30>;
 		};
 
 		pci@c0000000 {
diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
index 849034a49a3f..03caea6fc6ff 100644
--- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi
+++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
@@ -181,7 +181,7 @@
 };
 
 &gpio2 {
-	touch-interrupt {
+	touch-interrupt-hog {
 		gpio-hog;
 		gpios = <12 GPIO_ACTIVE_LOW>;
 		input;
diff --git a/arch/arm/boot/dts/kirkwood-c200-v1.dts b/arch/arm/boot/dts/kirkwood-c200-v1.dts
new file mode 100644
index 000000000000..f59ff7578dfc
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-c200-v1.dts
@@ -0,0 +1,310 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Ctera C200 V1 Board Description
+ * Copyright 2021-2022 Pawel Dembicki <paweldembicki@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Ctera C200 V1";
+	compatible = "ctera,c200-v1", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &uart0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_buttons>;
+		pinctrl-names = "default";
+
+		power {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+		};
+
+		reset {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+		};
+
+		usb1 {
+			label = "USB1 Button";
+			linux,code = <BTN_0>;
+			gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
+		};
+
+		usb2 {
+			label = "USB2 Button";
+			linux,code = <BTN_1>;
+			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&pmx_poweroff>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_leds>;
+		pinctrl-names = "default";
+
+		led-0 {
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+		};
+
+		led-2 {
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+		};
+
+		led-3 {
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+		};
+
+		led-4 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+		};
+
+		led-6 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+		};
+
+		led-7 {
+			function = LED_FUNCTION_DISK_ERR;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+		};
+
+		led-8 {
+			function = LED_FUNCTION_DISK_ERR;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		};
+
+		led-9 {
+			function = LED_FUNCTION_USB;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+		};
+
+		led-10 {
+			function = LED_FUNCTION_USB;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "usbport";
+			trigger-sources = <&hub_port2>;
+		};
+
+		led-11 {
+			function = LED_FUNCTION_USB;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+		};
+
+		led-12 {
+			function = LED_FUNCTION_USB;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "usbport";
+			trigger-sources = <&hub_port1>;
+		};
+	};
+};
+
+&eth0 {
+	status = "okay";
+};
+
+&eth0port {
+	phy-handle = <&ethphy9>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	rtc@30 {
+		compatible = "s35390a";
+		reg = <0x30>;
+	};
+
+	lm63@4c {
+		compatible = "national,lm63";
+		reg = <0x4c>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy9: ethernet-phy@9 {
+		reg = <9>;
+	};
+};
+
+&nand {
+	status = "okay";
+	chip-delay = <40>;
+
+	partition@0 {
+		label = "uboot";
+		reg = <0x0000000 0x200000>;
+	};
+
+	partition@200000 {
+		label = "certificate";
+		reg = <0x0200000 0x100000>;
+	};
+
+	partition@300000 {
+		label = "preset_cfg";
+		reg = <0x0300000 0x100000>;
+	};
+
+	partition@400000 {
+		label = "dev_params";
+		reg = <0x0400000 0x100000>;
+	};
+
+	partition@500000 {
+		label = "active_bank";
+		reg = <0x0500000 0x0100000>;
+	};
+
+	partition@600000 {
+		label = "magic";
+		reg = <0x0600000 0x0100000>;
+	};
+
+	partition@700000 {
+		label = "bank1";
+		reg = <0x0700000 0x2800000>;
+	};
+
+	partition@2f00000 {
+		label = "bank2";
+		reg = <0x2f00000 0x2800000>;
+	};
+
+	/* 0x5700000-0x5a00000 undefined in vendor firmware */
+
+	partition@5a00000 {
+		label = "reserved";
+		reg = <0x5a00000 0x2000000>;
+	};
+
+	partition@7a00000 {
+		label = "rootfs";
+		reg = <0x7a00000 0x8600000>;
+	};
+};
+
+&pinctrl {
+	/* Buzzer gpios are connected to two pins of buzzer.
+	 * This buzzer require a modulated signal from gpio.
+	 * Leave it as is due lack of proper driver.
+	 */
+	pmx_buzzer: pmx-buzzer {
+		marvell,pins = "mpp12", "mpp13";
+		marvell,function = "gpio";
+	};
+
+	pmx_leds: pmx-leds {
+		marvell,pins = "mpp14", "mpp15", "mpp16", "mpp17", "mpp38",
+			       "mpp39", "mpp40", "mpp42", "mpp43", "mpp44",
+			       "mpp45", "mpp46", "mpp47";
+		marvell,function = "gpio";
+	};
+
+	pmx_buttons: pmx-buttons {
+		marvell,pins = "mpp28", "mpp29", "mpp48", "mpp49";
+		marvell,function = "gpio";
+	};
+
+	pmx_poweroff: pmx-poweroff {
+		marvell,pins = "mpp34";
+		marvell,function = "gpio";
+	};
+};
+
+&rtc {
+	status = "disabled";
+};
+
+&sata {
+	status = "okay";
+	nr-ports = <2>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	port@1 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <1>;
+		#trigger-source-cells = <0>;
+
+		hub_port1: port@1 {
+			reg = <1>;
+			#trigger-source-cells = <0>;
+		};
+
+		hub_port2: port@2 {
+			reg = <2>;
+			#trigger-source-cells = <0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/lan966x-pcb8291.dts b/arch/arm/boot/dts/lan966x-pcb8291.dts
new file mode 100644
index 000000000000..3281af90ac6d
--- /dev/null
+++ b/arch/arm/boot/dts/lan966x-pcb8291.dts
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * lan966x_pcb8291.dts - Device Tree file for PCB8291
+ */
+/dts-v1/;
+#include "lan966x.dtsi"
+
+/ {
+	model = "Microchip EVB - LAN9662";
+	compatible = "microchip,lan9662-pcb8291", "microchip,lan9662", "microchip,lan966";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &usart3;
+	};
+};
+
+&gpio {
+	fc_shrd7_pins: fc_shrd7-pins {
+		pins = "GPIO_49";
+		function = "fc_shrd7";
+	};
+
+	fc_shrd8_pins: fc_shrd8-pins {
+		pins = "GPIO_54";
+		function = "fc_shrd8";
+	};
+
+	fc3_b_pins: fcb3-spi-pins {
+		/* SCK, RXD, TXD */
+		pins = "GPIO_51", "GPIO_52", "GPIO_53";
+		function = "fc3_b";
+	};
+
+	can0_b_pins:  can0_b_pins {
+		/* RX, TX */
+		pins = "GPIO_35", "GPIO_36";
+		function = "can0_b";
+	};
+};
+
+&can0 {
+	pinctrl-0 = <&can0_b_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&flx3 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	usart3: serial@200 {
+		pinctrl-0 = <&fc3_b_pins>, <&fc_shrd7_pins>, <&fc_shrd8_pins>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/lan966x.dtsi b/arch/arm/boot/dts/lan966x.dtsi
new file mode 100644
index 000000000000..7d2869648050
--- /dev/null
+++ b/arch/arm/boot/dts/lan966x.dtsi
@@ -0,0 +1,237 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * lan966x.dtsi - Device Tree Include file for Microchip LAN966 family SoC
+ *
+ * Copyright (C) 2021 Microchip Technology, Inc. and its subsidiaries
+ *
+ * Author: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/microchip,lan966x.h>
+
+/ {
+	model = "Microchip LAN966 family SoC";
+	compatible = "microchip,lan966";
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			clock-frequency = <600000000>;
+			reg = <0x0>;
+		};
+	};
+
+	clocks {
+		sys_clk: sys_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <162500000>;
+		};
+
+		cpu_clk: cpu_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <600000000>;
+		};
+
+		ddr_clk: ddr_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <300000000>;
+		};
+
+		nic_clk: nic_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+	};
+
+	clks: clock-controller@e00c00a8 {
+		compatible = "microchip,lan966x-gck";
+		#clock-cells = <1>;
+		clocks = <&cpu_clk>, <&ddr_clk>, <&sys_clk>;
+		clock-names = "cpu", "ddr", "sys";
+		reg = <0xe00c00a8 0x38>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <37500000>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		flx0: flexcom@e0040000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe0040000 0x100>;
+			clocks = <&clks GCK_ID_FLEXCOM0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe0040000 0x800>;
+			status = "disabled";
+		};
+
+		flx1: flexcom@e0044000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe0044000 0x100>;
+			clocks = <&clks GCK_ID_FLEXCOM1>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe0044000 0x800>;
+			status = "disabled";
+		};
+
+		trng: rng@e0048000 {
+			compatible = "atmel,at91sam9g45-trng";
+			reg = <0xe0048000 0x100>;
+			clocks = <&nic_clk>;
+		};
+
+		aes: crypto@e004c000 {
+			compatible = "atmel,at91sam9g46-aes";
+			reg = <0xe004c000 0x100>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(13)>,
+			       <&dma0 AT91_XDMAC_DT_PERID(12)>;
+			dma-names = "rx", "tx";
+			clocks = <&nic_clk>;
+			clock-names = "aes_clk";
+		};
+
+		flx2: flexcom@e0060000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe0060000 0x100>;
+			clocks = <&clks GCK_ID_FLEXCOM2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe0060000 0x800>;
+			status = "disabled";
+		};
+
+		flx3: flexcom@e0064000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe0064000 0x100>;
+			clocks = <&clks GCK_ID_FLEXCOM3>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe0064000 0x800>;
+			status = "disabled";
+
+			usart3: serial@200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&nic_clk>;
+				clock-names = "usart";
+				atmel,fifo-size = <32>;
+				status = "disabled";
+			};
+		};
+
+		dma0: dma-controller@e0068000 {
+			compatible = "microchip,sama7g5-dma";
+			reg = <0xe0068000 0x1000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&nic_clk>;
+			clock-names = "dma_clk";
+		};
+
+		sha: crypto@e006c000 {
+			compatible = "atmel,at91sam9g46-sha";
+			reg = <0xe006c000 0xec>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(14)>;
+			dma-names = "tx";
+			clocks = <&nic_clk>;
+			clock-names = "sha_clk";
+		};
+
+		flx4: flexcom@e0070000 {
+			compatible = "atmel,sama5d2-flexcom";
+			reg = <0xe0070000 0x100>;
+			clocks = <&clks GCK_ID_FLEXCOM4>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe0070000 0x800>;
+			status = "disabled";
+		};
+
+		timer0: timer@e008c000 {
+			compatible = "snps,dw-apb-timer";
+			reg = <0xe008c000 0x400>;
+			clocks = <&nic_clk>;
+			clock-names = "timer";
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		watchdog: watchdog@e0090000 {
+			compatible = "snps,dw-wdt";
+			reg = <0xe0090000 0x1000>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&nic_clk>;
+			status = "disabled";
+		};
+
+		can0: can@e081c000 {
+			compatible = "bosch,m_can";
+			reg = <0xe081c000 0xfc>, <0x00100000 0x4000>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&clks GCK_ID_MCAN0>, <&clks GCK_ID_MCAN0>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&clks GCK_ID_MCAN0>;
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0x0 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		gpio: pinctrl@e2004064 {
+			compatible = "microchip,lan966x-pinctrl";
+			reg = <0xe2004064 0xb4>,
+			    <0xe2010024 0x138>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&gpio 0 0 78>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <2>;
+		};
+
+		gic: interrupt-controller@e8c11000 {
+			compatible = "arm,gic-400", "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			reg = <0xe8c11000 0x1000>,
+			      <0xe8c12000 0x2000>,
+			      <0xe8c14000 0x2000>,
+			      <0xe8c16000 0x2000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts
index 57bae2aa910e..cb08aa62d967 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts
+++ b/arch/arm/boot/dts/logicpd-torpedo-35xx-devkit.dts
@@ -11,3 +11,11 @@
 	model = "LogicPD Zoom OMAP35xx Torpedo Development Kit";
 	compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3430", "ti,omap3";
 };
+
+&omap3_pmx_core {
+	isp1763_pins: pinmux_isp1763_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2154,  PIN_INPUT_PULLUP | MUX_MODE4)	/* sdmmc1_dat6.gpio_128 */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
index 5532db04046c..07ea822fe405 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
+++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
@@ -85,3 +85,12 @@
 		>;
 	};
 };
+
+/* The gpio muxing between omap3530 and dm3730 is different for GPIO_128 */
+&omap3_pmx_wkup {
+	isp1763_pins: pinmux_isp1763_pins {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a58, PIN_INPUT_PULLUP | MUX_MODE4)	/* reserved.gpio_128 */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
index 533a47bc4a53..b4664ab00256 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
+++ b/arch/arm/boot/dts/logicpd-torpedo-baseboard.dtsi
@@ -93,7 +93,8 @@
 
 &gpmc {
 	ranges = <0 0 0x30000000 0x1000000	/* CS0: 16MB for NAND */
-		  1 0 0x2c000000 0x1000000>;	/* CS1: 16MB for LAN9221 */
+		  1 0 0x2c000000 0x1000000	/* CS1: 16MB for LAN9221 */
+		  6 0 0x28000000 0x1000000>;	/* CS6: 16MB for ISP1763 */
 
 	ethernet@gpmc {
 		pinctrl-names = "default";
@@ -102,6 +103,44 @@
 		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;		/* gpio129 */
 		reg = <1 0 0xff>;
 	};
+
+	usb@6,0 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&isp1763_pins>;
+		compatible = "nxp,usb-isp1763";
+		reg = <0x6 0x0 0xff>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "host";
+		bus-width = <16>;
+		dr_mode = "host";
+		gpmc,mux-add-data = <0>;
+		gpmc,device-width = <2>;
+		gpmc,wait-pin = <0>;
+		gpmc,burst-length = <4>;
+		gpmc,cycle2cycle-samecsen = <1>;
+		gpmc,cycle2cycle-diffcsen = <1>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <45>;
+		gpmc,cs-wr-off-ns = <45>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <0>;
+		gpmc,adv-wr-off-ns = <0>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <45>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <25>;
+		gpmc,rd-cycle-ns = <60>;
+		gpmc,wr-cycle-ns = <45>;
+		gpmc,access-ns = <35>;
+		gpmc,page-burst-access-ns = <0>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <60>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-data-mux-bus-ns = <5>;
+		gpmc,wr-access-ns = <20>;
+	};
 };
 
 &hdqw1w {
diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi
index 3be7cba603d5..26eaba3fa96f 100644
--- a/arch/arm/boot/dts/meson.dtsi
+++ b/arch/arm/boot/dts/meson.dtsi
@@ -59,7 +59,7 @@
 			};
 
 			uart_A: serial@84c0 {
-				compatible = "amlogic,meson6-uart", "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart";
 				reg = <0x84c0 0x18>;
 				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
 				fifo-size = <128>;
@@ -67,7 +67,7 @@
 			};
 
 			uart_B: serial@84dc {
-				compatible = "amlogic,meson6-uart", "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart";
 				reg = <0x84dc 0x18>;
 				interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
@@ -105,7 +105,7 @@
 			};
 
 			uart_C: serial@8700 {
-				compatible = "amlogic,meson6-uart", "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart";
 				reg = <0x8700 0x18>;
 				interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
@@ -228,7 +228,7 @@
 			};
 
 			uart_AO: serial@4c0 {
-				compatible = "amlogic,meson6-uart", "amlogic,meson-ao-uart", "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart", "amlogic,meson-ao-uart";
 				reg = <0x4c0 0x18>;
 				interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
index f80ddc98d3a2..9997a5d0333a 100644
--- a/arch/arm/boot/dts/meson8.dtsi
+++ b/arch/arm/boot/dts/meson8.dtsi
@@ -736,27 +736,27 @@
 };
 
 &uart_AO {
-	compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_CLK81>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8-uart", "amlogic,meson-ao-uart";
+	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_A {
-	compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART0>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_B {
-	compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART1>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_C {
-	compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART2>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &usb0 {
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index b49b7cbaed4e..94f1c03decce 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -724,27 +724,27 @@
 };
 
 &uart_AO {
-	compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_CLK81>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8b-uart", "amlogic,meson-ao-uart";
+	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_A {
-	compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART0>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8b-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_B {
-	compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART1>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8b-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_C {
-	compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART2>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8b-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &usb0 {
diff --git a/arch/arm/boot/dts/mstar-infinity.dtsi b/arch/arm/boot/dts/mstar-infinity.dtsi
index 0bee517797f4..441a917b88ba 100644
--- a/arch/arm/boot/dts/mstar-infinity.dtsi
+++ b/arch/arm/boot/dts/mstar-infinity.dtsi
@@ -8,6 +8,40 @@
 
 #include <dt-bindings/gpio/msc313-gpio.h>
 
+/ {
+	cpu0_opp_table: opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-240000000 {
+			opp-hz = /bits/ 64 <240000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <300000>;
+		};
+
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <300000>;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <300000>;
+		};
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <300000>;
+		};
+	};
+};
+
+&cpu0 {
+	operating-points-v2 = <&cpu0_opp_table>;
+};
+
 &imi {
 	reg = <0xa0000000 0x16000>;
 };
diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd201-som2d01.dtsi b/arch/arm/boot/dts/mstar-infinity2m-ssd201-som2d01.dtsi
new file mode 100644
index 000000000000..34df472fed71
--- /dev/null
+++ b/arch/arm/boot/dts/mstar-infinity2m-ssd201-som2d01.dtsi
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2021 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ * Author: Romain Perier <romain.perier@gmail.com>
+ */
+
+/ {
+	reg_vcc_dram: regulator-vcc-dram {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_dram";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+	};
+};
+
+&pm_uart {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd202d-100ask-dongshanpione.dts b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-100ask-dongshanpione.dts
new file mode 100644
index 000000000000..f25a04c98ccb
--- /dev/null
+++ b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-100ask-dongshanpione.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2021 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ */
+
+/dts-v1/;
+#include "mstar-infinity2m-ssd202d.dtsi"
+
+/ {
+	model = "DongShanPi One";
+	compatible = "100ask,dongshanpione", "mstar,infinity2m";
+
+	aliases {
+		serial0 = &pm_uart;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&pm_uart {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd202d-miyoo-mini.dts b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-miyoo-mini.dts
new file mode 100644
index 000000000000..1bbbf47132dc
--- /dev/null
+++ b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-miyoo-mini.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2021 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ */
+
+/dts-v1/;
+#include "mstar-infinity2m-ssd202d.dtsi"
+
+/ {
+	model = "Miyoo Mini";
+	compatible = "miyoo,miyoo-mini", "mstar,infinity2m";
+
+	aliases {
+		serial0 = &pm_uart;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&pm_uart {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-sbc2d06-v1b-22w.dts b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-sbc2d06-v1b-22w.dts
new file mode 100644
index 000000000000..b15c40762bc0
--- /dev/null
+++ b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-sbc2d06-v1b-22w.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2021 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ * Author: Romain Perier <romain.perier@gmail.com>
+ */
+
+/dts-v1/;
+#include "mstar-infinity2m-ssd202d-wirelesstag-ido-som2d01.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Wireless Tag IDO-SBC2D06-1VB-22W";
+	compatible = "wirelesstag,ido-sbc2d06-v1b-22w", "mstar,infinity2m";
+
+	leds {
+		compatible = "gpio-leds";
+		sys_led {
+			gpios = <&gpio SSD20XD_GPIO_GPIO85 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-som2d01.dtsi b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-som2d01.dtsi
new file mode 100644
index 000000000000..d877aff85033
--- /dev/null
+++ b/arch/arm/boot/dts/mstar-infinity2m-ssd202d-wirelesstag-ido-som2d01.dtsi
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2021 thingy.jp.
+ * Author: Daniel Palmer <daniel@thingy.jp>
+ * Author: Romain Perier <romain.perier@gmail.com>
+ */
+
+/dts-v1/;
+#include "mstar-infinity2m-ssd202d.dtsi"
+#include "mstar-infinity2m-ssd201-som2d01.dtsi"
+
+/ {
+	model = "Wireless Tag IDO-SOM2D01 (SSD202D)";
+	compatible = "wirelesstag,ido-som2d01", "mstar,infinity2m";
+
+	aliases {
+		serial0 = &pm_uart;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&reg_vcc_dram {
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+};
diff --git a/arch/arm/boot/dts/mstar-infinity2m-ssd20xd.dtsi b/arch/arm/boot/dts/mstar-infinity2m-ssd20xd.dtsi
index 7a5e28b33f96..6f067da61ba3 100644
--- a/arch/arm/boot/dts/mstar-infinity2m-ssd20xd.dtsi
+++ b/arch/arm/boot/dts/mstar-infinity2m-ssd20xd.dtsi
@@ -6,6 +6,11 @@
 
 #include "mstar-infinity2m.dtsi"
 
+&gpio {
+	compatible = "sstar,ssd20xd-gpio";
+	status = "okay";
+};
+
 &smpctrl {
 	compatible = "sstar,ssd201-smpctrl", "mstar,smpctrl";
 	status = "okay";
diff --git a/arch/arm/boot/dts/mstar-infinity2m.dtsi b/arch/arm/boot/dts/mstar-infinity2m.dtsi
index 6d4d1d224e96..1b485efd7156 100644
--- a/arch/arm/boot/dts/mstar-infinity2m.dtsi
+++ b/arch/arm/boot/dts/mstar-infinity2m.dtsi
@@ -6,11 +6,28 @@
 
 #include "mstar-infinity.dtsi"
 
+&cpu0_opp_table {
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <300000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <300000>;
+		};
+};
+
 &cpus {
 	cpu1: cpu@1 {
 		device_type = "cpu";
 		compatible = "arm,cortex-a7";
+		operating-points-v2 = <&cpu0_opp_table>;
 		reg = <0x1>;
+		clocks = <&cpupll>;
+		clock-names = "cpuclk";
 	};
 };
 
diff --git a/arch/arm/boot/dts/mstar-infinity3.dtsi b/arch/arm/boot/dts/mstar-infinity3.dtsi
index 9857e2a9934d..a56cf29e5d82 100644
--- a/arch/arm/boot/dts/mstar-infinity3.dtsi
+++ b/arch/arm/boot/dts/mstar-infinity3.dtsi
@@ -6,6 +6,64 @@
 
 #include "mstar-infinity.dtsi"
 
+&cpu0_opp_table {
+	opp-1008000000 {
+		opp-hz = /bits/ 64 <1008000000>;
+		opp-microvolt = <1000000>;
+		clock-latency-ns = <300000>;
+	};
+
+	// overclock frequencies below, shown to work fine up to 1.3 GHz
+	opp-108000000 {
+		opp-hz = /bits/ 64 <1080000000>;
+		opp-microvolt = <1000000>;
+		clock-latency-ns = <300000>;
+		turbo-mode;
+	};
+
+	opp-1188000000 {
+		opp-hz = /bits/ 64 <1188000000>;
+		opp-microvolt = <1000000>;
+		clock-latency-ns = <300000>;
+		turbo-mode;
+	};
+
+	opp-1296000000 {
+		opp-hz = /bits/ 64 <1296000000>;
+		opp-microvolt = <1000000>;
+		clock-latency-ns = <300000>;
+		turbo-mode;
+	};
+
+	opp-1350000000 {
+		opp-hz = /bits/ 64 <1350000000>;
+		opp-microvolt = <1000000>;
+		clock-latency-ns = <300000>;
+		turbo-mode;
+	};
+
+	opp-1404000000 {
+		opp-hz = /bits/ 64 <1404000000>;
+		opp-microvolt = <1000000>;
+		clock-latency-ns = <300000>;
+		turbo-mode;
+	};
+
+	opp-1458000000 {
+		opp-hz = /bits/ 64 <1458000000>;
+		opp-microvolt = <1000000>;
+		clock-latency-ns = <300000>;
+		turbo-mode;
+	};
+
+	opp-1512000000 {
+		opp-hz = /bits/ 64 <1512000000>;
+		opp-microvolt = <1000000>;
+		clock-latency-ns = <300000>;
+		turbo-mode;
+	};
+};
+
 &imi {
 	reg = <0xa0000000 0x20000>;
 };
diff --git a/arch/arm/boot/dts/mstar-v7.dtsi b/arch/arm/boot/dts/mstar-v7.dtsi
index 89ebfe4f29da..c26ba9b7b6dd 100644
--- a/arch/arm/boot/dts/mstar-v7.dtsi
+++ b/arch/arm/boot/dts/mstar-v7.dtsi
@@ -21,6 +21,8 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0x0>;
+			clocks = <&cpupll>;
+			clock-names = "cpuclk";
 		};
 	};
 
@@ -155,6 +157,13 @@
 				clocks = <&xtal>;
 			};
 
+			cpupll: cpupll@206400 {
+				compatible = "mstar,msc313-cpupll";
+				reg = <0x206400 0x200>;
+				#clock-cells = <0>;
+				clocks = <&mpll MSTAR_MSC313_MPLL_DIV2>;
+			};
+
 			gpio: gpio@207800 {
 				#gpio-cells = <2>;
 				reg = <0x207800 0x200>;
diff --git a/arch/arm/boot/dts/mt6582-prestigio-pmt5008-3g.dts b/arch/arm/boot/dts/mt6582-prestigio-pmt5008-3g.dts
new file mode 100644
index 000000000000..b057e037f940
--- /dev/null
+++ b/arch/arm/boot/dts/mt6582-prestigio-pmt5008-3g.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2021 Maxim Kutnij <gtk3@inbox.ru>
+ */
+
+/dts-v1/;
+#include "mt6582.dtsi"
+
+/ {
+	model = "Prestigio PMT5008 3G";
+	compatible = "prestigio,pmt5008-3g", "mediatek,mt6582";
+
+	aliases {
+		bootargs = "console=ttyS0,921600n8 earlyprintk";
+		serial0 = &uart0;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/mt6582.dtsi b/arch/arm/boot/dts/mt6582.dtsi
new file mode 100644
index 000000000000..4263371784cd
--- /dev/null
+++ b/arch/arm/boot/dts/mt6582.dtsi
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2021 Maxim Kutnij <gtk3@inbox.ru>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "mediatek,mt6582";
+	interrupt-parent = <&sysirq>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+		};
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+		};
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x3>;
+		};
+	};
+
+	system_clk: dummy13m {
+		compatible = "fixed-clock";
+		clock-frequency = <13000000>;
+		#clock-cells = <0>;
+	};
+
+	rtc_clk: dummy32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32000>;
+		#clock-cells = <0>;
+	};
+
+	uart_clk: dummy26m {
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+		#clock-cells = <0>;
+	};
+
+	timer: timer@11008000 {
+		compatible = "mediatek,mt6577-timer";
+		reg = <0x10008000 0x80>;
+		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&system_clk>, <&rtc_clk>;
+		clock-names = "system-clk", "rtc-clk";
+	};
+
+	sysirq: interrupt-controller@10200100 {
+		compatible = "mediatek,mt6582-sysirq",
+			     "mediatek,mt6577-sysirq";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0x10200100 0x1c>;
+	};
+
+	gic: interrupt-controller@10211000 {
+		compatible = "arm,cortex-a7-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		interrupt-parent = <&gic>;
+		reg = <0x10211000 0x1000>,
+		      <0x10212000 0x2000>,
+		      <0x10214000 0x2000>,
+		      <0x10216000 0x2000>;
+	};
+
+	uart0: serial@11002000 {
+		compatible = "mediatek,mt6582-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0x11002000 0x400>;
+		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+
+	uart1: serial@11003000 {
+		compatible = "mediatek,mt6582-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0x11003000 0x400>;
+		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+
+	uart2: serial@11004000 {
+		compatible = "mediatek,mt6582-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0x11004000 0x400>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+
+	uart3: serial@11005000 {
+		compatible = "mediatek,mt6582-uart",
+			     "mediatek,mt6577-uart";
+		reg = <0x11005000 0x400>;
+		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&uart_clk>;
+		status = "disabled";
+	};
+
+	watchdog: watchdog@10007000 {
+		compatible = "mediatek,mt6582-wdt",
+			     "mediatek,mt6589-wdt";
+		reg = <0x10007000 0x100>;
+	};
+};
diff --git a/arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts b/arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts
index 83f27fbf4e93..3ee61251a16d 100644
--- a/arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts
+++ b/arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts
@@ -8,6 +8,9 @@
 
 #include "nuvoton-wpcm450.dtsi"
 
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/gpio/gpio.h>
+
 / {
 	model = "Supermicro X9SCi-LN4F BMC";
 	compatible = "supermicro,x9sci-ln4f-bmc", "nuvoton,wpcm450";
@@ -20,6 +23,46 @@
 		device_type = "memory";
 		reg = <0 0x08000000>; /* 128 MiB */
 	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_pins>;
+
+		uid {
+			label = "UID button";
+			linux,code = <KEY_HOME>;
+			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+
+		uid {
+			label = "UID";
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		heartbeat {
+			label = "heartbeat";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&pinctrl {
+	key_pins: mux-keys {
+		groups = "gspi", "sspi";
+		function = "gpio";
+	};
+
+	led_pins: mux-leds {
+		groups = "hg3", "hg0", "pwm4";
+		function = "gpio";
+	};
 };
 
 &serial0 {
diff --git a/arch/arm/boot/dts/nuvoton-wpcm450.dtsi b/arch/arm/boot/dts/nuvoton-wpcm450.dtsi
index d7cbeb187484..93595850a4c3 100644
--- a/arch/arm/boot/dts/nuvoton-wpcm450.dtsi
+++ b/arch/arm/boot/dts/nuvoton-wpcm450.dtsi
@@ -8,6 +8,17 @@
 	#address-cells = <1>;
 	#size-cells = <1>;
 
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		gpio4 = &gpio4;
+		gpio5 = &gpio5;
+		gpio6 = &gpio6;
+		gpio7 = &gpio7;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -33,12 +44,19 @@
 		interrupt-parent = <&aic>;
 		ranges;
 
+		gcr: syscon@b0000000 {
+			compatible = "nuvoton,wpcm450-gcr", "syscon", "simple-mfd";
+			reg = <0xb0000000 0x200>;
+		};
+
 		serial0: serial@b8000000 {
 			compatible = "nuvoton,wpcm450-uart";
 			reg = <0xb8000000 0x20>;
 			reg-shift = <2>;
 			interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk24m>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&bsp_pins>;
 			status = "disabled";
 		};
 
@@ -72,5 +90,371 @@
 			interrupt-controller;
 			#interrupt-cells = <2>;
 		};
+
+		pinctrl: pinctrl@b8003000 {
+			compatible = "nuvoton,wpcm450-pinctrl";
+			reg = <0xb8003000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpio0: gpio@0 {
+				reg = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
+					     <3 IRQ_TYPE_LEVEL_HIGH>,
+					     <4 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+			};
+
+			gpio1: gpio@1 {
+				reg = <1>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+			};
+
+			gpio2: gpio@2 {
+				reg = <2>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio3: gpio@3 {
+				reg = <3>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio4: gpio@4 {
+				reg = <4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio5: gpio@5 {
+				reg = <5>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio6: gpio@6 {
+				reg = <6>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			gpio7: gpio@7 {
+				reg = <7>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			smb3_pins: mux-smb3 {
+				groups = "smb3";
+				function = "smb3";
+			};
+
+			smb4_pins: mux-smb4 {
+				groups = "smb4";
+				function = "smb4";
+			};
+
+			smb5_pins: mux-smb5 {
+				groups = "smb5";
+				function = "smb5";
+			};
+
+			scs1_pins: mux-scs1 {
+				groups = "scs1";
+				function = "scs1";
+			};
+
+			scs2_pins: mux-scs2 {
+				groups = "scs2";
+				function = "scs2";
+			};
+
+			scs3_pins: mux-scs3 {
+				groups = "scs3";
+				function = "scs3";
+			};
+
+			smb0_pins: mux-smb0 {
+				groups = "smb0";
+				function = "smb0";
+			};
+
+			smb1_pins: mux-smb1 {
+				groups = "smb1";
+				function = "smb1";
+			};
+
+			smb2_pins: mux-smb2 {
+				groups = "smb2";
+				function = "smb2";
+			};
+
+			bsp_pins: mux-bsp {
+				groups = "bsp";
+				function = "bsp";
+			};
+
+			hsp1_pins: mux-hsp1 {
+				groups = "hsp1";
+				function = "hsp1";
+			};
+
+			hsp2_pins: mux-hsp2 {
+				groups = "hsp2";
+				function = "hsp2";
+			};
+
+			r1err_pins: mux-r1err {
+				groups = "r1err";
+				function = "r1err";
+			};
+
+			r1md_pins: mux-r1md {
+				groups = "r1md";
+				function = "r1md";
+			};
+
+			rmii2_pins: mux-rmii2 {
+				groups = "rmii2";
+				function = "rmii2";
+			};
+
+			r2err_pins: mux-r2err {
+				groups = "r2err";
+				function = "r2err";
+			};
+
+			r2md_pins: mux-r2md {
+				groups = "r2md";
+				function = "r2md";
+			};
+
+			kbcc_pins: mux-kbcc {
+				groups = "kbcc";
+				function = "kbcc";
+			};
+
+			dvo0_pins: mux-dvo0 {
+				groups = "dvo";
+				function = "dvo0";
+			};
+
+			dvo3_pins: mux-dvo3 {
+				groups = "dvo";
+				function = "dvo3";
+			};
+
+			clko_pins: mux-clko {
+				groups = "clko";
+				function = "clko";
+			};
+
+			smi_pins: mux-smi {
+				groups = "smi";
+				function = "smi";
+			};
+
+			uinc_pins: mux-uinc {
+				groups = "uinc";
+				function = "uinc";
+			};
+
+			gspi_pins: mux-gspi {
+				groups = "gspi";
+				function = "gspi";
+			};
+
+			mben_pins: mux-mben {
+				groups = "mben";
+				function = "mben";
+			};
+
+			xcs2_pins: mux-xcs2 {
+				groups = "xcs2";
+				function = "xcs2";
+			};
+
+			xcs1_pins: mux-xcs1 {
+				groups = "xcs1";
+				function = "xcs1";
+			};
+
+			sdio_pins: mux-sdio {
+				groups = "sdio";
+				function = "sdio";
+			};
+
+			sspi_pins: mux-sspi {
+				groups = "sspi";
+				function = "sspi";
+			};
+
+			fi0_pins: mux-fi0 {
+				groups = "fi0";
+				function = "fi0";
+			};
+
+			fi1_pins: mux-fi1 {
+				groups = "fi1";
+				function = "fi1";
+			};
+
+			fi2_pins: mux-fi2 {
+				groups = "fi2";
+				function = "fi2";
+			};
+
+			fi3_pins: mux-fi3 {
+				groups = "fi3";
+				function = "fi3";
+			};
+
+			fi4_pins: mux-fi4 {
+				groups = "fi4";
+				function = "fi4";
+			};
+
+			fi5_pins: mux-fi5 {
+				groups = "fi5";
+				function = "fi5";
+			};
+
+			fi6_pins: mux-fi6 {
+				groups = "fi6";
+				function = "fi6";
+			};
+
+			fi7_pins: mux-fi7 {
+				groups = "fi7";
+				function = "fi7";
+			};
+
+			fi8_pins: mux-fi8 {
+				groups = "fi8";
+				function = "fi8";
+			};
+
+			fi9_pins: mux-fi9 {
+				groups = "fi9";
+				function = "fi9";
+			};
+
+			fi10_pins: mux-fi10 {
+				groups = "fi10";
+				function = "fi10";
+			};
+
+			fi11_pins: mux-fi11 {
+				groups = "fi11";
+				function = "fi11";
+			};
+
+			fi12_pins: mux-fi12 {
+				groups = "fi12";
+				function = "fi12";
+			};
+
+			fi13_pins: mux-fi13 {
+				groups = "fi13";
+				function = "fi13";
+			};
+
+			fi14_pins: mux-fi14 {
+				groups = "fi14";
+				function = "fi14";
+			};
+
+			fi15_pins: mux-fi15 {
+				groups = "fi15";
+				function = "fi15";
+			};
+
+			pwm0_pins: mux-pwm0 {
+				groups = "pwm0";
+				function = "pwm0";
+			};
+
+			pwm1_pins: mux-pwm1 {
+				groups = "pwm1";
+				function = "pwm1";
+			};
+
+			pwm2_pins: mux-pwm2 {
+				groups = "pwm2";
+				function = "pwm2";
+			};
+
+			pwm3_pins: mux-pwm3 {
+				groups = "pwm3";
+				function = "pwm3";
+			};
+
+			pwm4_pins: mux-pwm4 {
+				groups = "pwm4";
+				function = "pwm4";
+			};
+
+			pwm5_pins: mux-pwm5 {
+				groups = "pwm5";
+				function = "pwm5";
+			};
+
+			pwm6_pins: mux-pwm6 {
+				groups = "pwm6";
+				function = "pwm6";
+			};
+
+			pwm7_pins: mux-pwm7 {
+				groups = "pwm7";
+				function = "pwm7";
+			};
+
+			hg0_pins: mux-hg0 {
+				groups = "hg0";
+				function = "hg0";
+			};
+
+			hg1_pins: mux-hg1 {
+				groups = "hg1";
+				function = "hg1";
+			};
+
+			hg2_pins: mux-hg2 {
+				groups = "hg2";
+				function = "hg2";
+			};
+
+			hg3_pins: mux-hg3 {
+				groups = "hg3";
+				function = "hg3";
+			};
+
+			hg4_pins: mux-hg4 {
+				groups = "hg4";
+				function = "hg4";
+			};
+
+			hg5_pins: mux-hg5 {
+				groups = "hg5";
+				function = "hg5";
+			};
+
+			hg6_pins: mux-hg6 {
+				groups = "hg6";
+				function = "hg6";
+			};
+
+			hg7_pins: mux-hg7 {
+				groups = "hg7";
+				function = "hg7";
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/omap3-beagle-ab4.dts b/arch/arm/boot/dts/omap3-beagle-ab4.dts
new file mode 100644
index 000000000000..990ff2d84686
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-beagle-ab4.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "omap3-beagle.dts"
+
+/ {
+	model = "TI OMAP3 BeagleBoard A to B4";
+	compatible = "ti,omap3-beagle-ab4", "ti,omap3-beagle", "ti,omap3430", "ti,omap3";
+};
+
+/*
+ * Workaround for capacitor C70 issue, see "Boards revision A and < B5"
+ * section at https://elinux.org/BeagleBoard_Community
+ */
+
+/* Unusable as clocksource because of unreliable oscillator */
+&counter32k {
+	status = "disabled";
+};
+
+/* Unusable as clockevent because of unreliable oscillator, allow to idle */
+&timer1_target {
+	/delete-property/ti,no-reset-on-init;
+	/delete-property/ti,no-idle;
+	timer@0 {
+		/delete-property/ti,timer-alwon;
+	};
+};
+
+/* Preferred always-on timer for clocksource */
+&timer12_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		/* Always clocked by secure_32k_fck */
+	};
+};
+
+/* Preferred timer for clockevent */
+&timer2_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		assigned-clocks = <&gpt2_fck>;
+		assigned-clock-parents = <&sys_ck>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index f9f34b8458e9..0548b391334f 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -304,39 +304,6 @@
 	phys = <0 &hsusb2_phy>;
 };
 
-/* Unusable as clocksource because of unreliable oscillator */
-&counter32k {
-	status = "disabled";
-};
-
-/* Unusable as clockevent because if unreliable oscillator, allow to idle */
-&timer1_target {
-	/delete-property/ti,no-reset-on-init;
-	/delete-property/ti,no-idle;
-	timer@0 {
-		/delete-property/ti,timer-alwon;
-	};
-};
-
-/* Preferred always-on timer for clocksource */
-&timer12_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		/* Always clocked by secure_32k_fck */
-	};
-};
-
-/* Preferred timer for clockevent */
-&timer2_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		assigned-clocks = <&gpt2_fck>;
-		assigned-clock-parents = <&sys_ck>;
-	};
-};
-
 &twl_gpio {
 	ti,use-leds;
 	/* pullups: BIT(1) */
diff --git a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
index 5e55198e4576..54cd37336be7 100644
--- a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
+++ b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi
@@ -158,6 +158,24 @@
 	status = "disabled";
 };
 
+/* Unusable as clockevent because if unreliable oscillator, allow to idle */
+&timer1_target {
+	/delete-property/ti,no-reset-on-init;
+	/delete-property/ti,no-idle;
+	timer@0 {
+		/delete-property/ti,timer-alwon;
+	};
+};
+
+/* Preferred timer for clockevent */
+&timer12_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		/* Always clocked by secure_32k_fck */
+	};
+};
+
 &twl_gpio {
 	ti,use-leds;
 	/*
diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts
index c2995a280729..162d0726b008 100644
--- a/arch/arm/boot/dts/omap3-devkit8000.dts
+++ b/arch/arm/boot/dts/omap3-devkit8000.dts
@@ -14,36 +14,3 @@
 		display2 = &tv0;
 	};
 };
-
-/* Unusable as clocksource because of unreliable oscillator */
-&counter32k {
-	status = "disabled";
-};
-
-/* Unusable as clockevent because if unreliable oscillator, allow to idle */
-&timer1_target {
-	/delete-property/ti,no-reset-on-init;
-	/delete-property/ti,no-idle;
-	timer@0 {
-		/delete-property/ti,timer-alwon;
-	};
-};
-
-/* Preferred always-on timer for clocksource */
-&timer12_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		/* Always clocked by secure_32k_fck */
-	};
-};
-
-/* Preferred timer for clockevent */
-&timer2_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		assigned-clocks = <&gpt2_fck>;
-		assigned-clock-parents = <&sys_ck>;
-	};
-};
diff --git a/arch/arm/boot/dts/openbmc-flash-layout-64.dtsi b/arch/arm/boot/dts/openbmc-flash-layout-64.dtsi
index 31f59de5190b..7af41361c480 100644
--- a/arch/arm/boot/dts/openbmc-flash-layout-64.dtsi
+++ b/arch/arm/boot/dts/openbmc-flash-layout-64.dtsi
@@ -28,7 +28,7 @@ partitions {
 		label = "rofs";
 	};
 
-	rwfs@6000000 {
+	rwfs@2a00000 {
 		reg = <0x2a00000 0x1600000>; // 22MB
 		label = "rwfs";
 	};
diff --git a/arch/arm/boot/dts/openbmc-flash-layout.dtsi b/arch/arm/boot/dts/openbmc-flash-layout.dtsi
index 6c26524e93e1..b47e14063c38 100644
--- a/arch/arm/boot/dts/openbmc-flash-layout.dtsi
+++ b/arch/arm/boot/dts/openbmc-flash-layout.dtsi
@@ -20,7 +20,7 @@ partitions {
 		label = "kernel";
 	};
 
-	rofs@c0000 {
+	rofs@4c0000 {
 		reg = <0x4c0000 0x1740000>;
 		label = "rofs";
 	};
diff --git a/arch/arm/boot/dts/ox810se-wd-mbwe.dts b/arch/arm/boot/dts/ox810se-wd-mbwe.dts
index 7e2fcb220aea..c59e06ff2423 100644
--- a/arch/arm/boot/dts/ox810se-wd-mbwe.dts
+++ b/arch/arm/boot/dts/ox810se-wd-mbwe.dts
@@ -103,6 +103,10 @@
 	};
 };
 
+&etha {
+	status = "okay";
+};
+
 &uart1 {
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/ox810se.dtsi b/arch/arm/boot/dts/ox810se.dtsi
index 0755e5864c4a..96c0745f7b70 100644
--- a/arch/arm/boot/dts/ox810se.dtsi
+++ b/arch/arm/boot/dts/ox810se.dtsi
@@ -81,6 +81,24 @@
 		ranges;
 		interrupt-parent = <&intc>;
 
+		etha: ethernet@40400000 {
+			compatible = "oxsemi,ox810se-dwmac", "snps,dwmac";
+			reg = <0x40400000 0x2000>;
+			interrupts = <8>;
+			interrupt-names = "macirq";
+			mac-address = [000000000000]; /* Filled in by U-Boot */
+			phy-mode = "rgmii";
+
+			clocks = <&stdclk 6>, <&gmacclk>;
+			clock-names = "gmac", "stmmaceth";
+			resets = <&reset 6>;
+
+			/* Regmap for sys registers */
+			oxsemi,sys-ctrl = <&sys>;
+
+			status = "disabled";
+		};
+
 		apb-bridge@44000000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts b/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts
index f350c4e8c194..2b7e52fda6a7 100644
--- a/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts
+++ b/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts
@@ -16,11 +16,35 @@
 
 	aliases {
 		serial0 = &blsp1_uart3;
+		serial1 = &blsp1_uart4;
 	};
 
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	vreg_wlan: wlan-regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "wl-reg";
+		regulator-min-microvolt = <2950000>;
+		regulator-max-microvolt = <2950000>;
+
+		gpio = <&tlmm 46 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_regulator_default_state>;
+	};
+};
+
+&blsp1_i2c1 {
+	status = "okay";
+
+	fuel-gauge@55 {
+		compatible = "ti,bq27421";
+		reg = <0x55>;
+	};
 };
 
 &blsp1_i2c5 {
@@ -57,14 +81,30 @@
 	status = "okay";
 };
 
+&blsp1_uart4 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&blsp1_uart4_default_state>;
+
+	bluetooth {
+		compatible = "brcm,bcm43430a0-bt";
+
+		max-speed = <3000000>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&bluetooth_default_state>;
+
+		host-wakeup-gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
+	};
+};
+
 &rpm_requests {
 	pm8226-regulators {
 		compatible = "qcom,rpm-pm8226-regulators";
 
-		pm8226_s1: s1 {
-			regulator-min-microvolt = <500000>;
-			regulator-max-microvolt = <1275000>;
-		};
 		pm8226_s3: s3 {
 			regulator-min-microvolt = <1200000>;
 			regulator-max-microvolt = <1350000>;
@@ -195,24 +235,55 @@
 
 	bus-width = <8>;
 	non-removable;
+};
 
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdhc1_pin_a>;
+&sdhc_3 {
+	status = "okay";
+
+	max-frequency = <100000000>;
+	non-removable;
+
+	vmmc-supply = <&vreg_wlan>;
+	vqmmc-supply = <&pm8226_l6>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	wifi@1 {
+		compatible = "brcm,bcm43430a0-fmac", "brcm,bcm4329-fmac";
+		reg = <1>;
+
+		interrupts-extended = <&tlmm 37 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-names = "host-wake";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_hostwake_default_state>;
+	};
+};
+
+&smbb {
+	qcom,fast-charge-safe-current = <450000>;
+	qcom,fast-charge-current-limit = <400000>;
+	qcom,fast-charge-safe-voltage = <4350000>;
+	qcom,fast-charge-high-threshold-voltage = <4350000>;
+	qcom,auto-recharge-threshold-voltage = <4240000>;
+	qcom,minimum-input-voltage = <4450000>;
 };
 
 &tlmm {
-	sdhc1_pin_a: sdhc1-pin-active {
-		clk {
-			pins = "sdc1_clk";
-			drive-strength = <10>;
-			bias-disable;
-		};
+	blsp1_uart4_default_state: blsp1-uart4-default-state {
+		pins = "gpio12", "gpio13", "gpio14", "gpio15";
+		function = "blsp_uart4";
+		drive-strength = <8>;
+		bias-disable;
+	};
 
-		cmd-data {
-			pins = "sdc1_cmd", "sdc1_data";
-			drive-strength = <10>;
-			bias-pull-up;
-		};
+	bluetooth_default_state: bluetooth-default-state {
+		pins = "gpio47", "gpio48";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		input-enable;
 	};
 
 	touch_pins: touch {
@@ -234,4 +305,31 @@
 			output-high;
 		};
 	};
+
+	wlan_hostwake_default_state: wlan-hostwake-default-state {
+		pins = "gpio37";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		input-enable;
+	};
+
+	wlan_regulator_default_state: wlan-regulator-default-state {
+		pins = "gpio46";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&usb {
+	status = "okay";
+	extcon = <&smbb>;
+	dr_mode = "peripheral";
+};
+
+&usb_hs_phy {
+	extcon = <&smbb>;
+	v1p8-supply = <&pm8226_l10>;
+	v3p3-supply = <&pm8226_l20>;
 };
diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
index d664ccd454c5..138d6478ac84 100644
--- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
@@ -83,7 +83,7 @@
 
 	soc {
 		pinctrl@800000 {
-			/* eMMMC pins, all 8 data lines connected */
+			/* eMMC pins, all 8 data lines connected */
 			dragon_sdcc1_pins: sdcc1 {
 				mux {
 					pins = "gpio159", "gpio160", "gpio161",
@@ -674,14 +674,14 @@
 					bias-pull-down;
 				};
 
-				/* LVS0 thru 3 and mvs0 are just switches */
+				/* LVS0 thru 3 and mvs are just switches */
 				lvs0 {
 					regulator-always-on;
 				};
 				lvs1 { };
 				lvs2 { };
 				lvs3 { };
-				mvs0 {};
+				mvs { };
 
 			};
 
diff --git a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
index 9a835335bf78..ca9f73528196 100644
--- a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
@@ -212,13 +212,12 @@
 			};
 		};
 
-		dsi0: mdss_dsi@4700000 {
+		dsi0: dsi@4700000 {
 			status = "okay";
 			vdda-supply = <&pm8921_l2>;/*VDD_MIPI1 to 4*/
 			vdd-supply = <&pm8921_l8>;
 			vddio-supply = <&pm8921_lvs7>;
 			avdd-supply = <&pm8921_l11>;
-			vcss-supply = <&ext_3p3v>;
 
 			panel@0 {
 				reg = <0>;
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 4d562c94c31c..a1c8ae516d21 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -815,6 +815,7 @@
 			nvmem-cells = <&tsens_calib>, <&tsens_backup>;
 			nvmem-cell-names = "calib", "calib_backup";
 			#clock-cells = <1>;
+			#power-domain-cells = <1>;
 			#reset-cells = <1>;
 			#thermal-sensor-cells = <1>;
 		};
@@ -830,11 +831,12 @@
 			compatible = "qcom,mmcc-apq8064";
 			reg = <0x4000000 0x1000>;
 			#clock-cells = <1>;
+			#power-domain-cells = <1>;
 			#reset-cells = <1>;
 		};
 
 		l2cc: clock-controller@2011000 {
-			compatible	= "syscon";
+			compatible	= "qcom,kpss-gcc", "syscon";
 			reg		= <0x2011000 0x1000>;
 		};
 
@@ -1238,7 +1240,7 @@
 			reg = <0x5700000 0x70>;
 		};
 
-		dsi0: mdss_dsi@4700000 {
+		dsi0: dsi@4700000 {
 			compatible = "qcom,mdss-dsi-ctrl";
 			label = "MDSS DSI CTRL->0";
 			#address-cells = <1>;
@@ -1268,6 +1270,7 @@
 						<&dsi0_phy 1>;
 			syscon-sfpb = <&mmss_sfpb>;
 			phys = <&dsi0_phy>;
+			phy-names = "dsi";
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1368,10 +1371,10 @@
 
 		pcie: pci@1b500000 {
 			compatible = "qcom,pcie-apq8064", "snps,dw-pcie";
-			reg = <0x1b500000 0x1000
-			       0x1b502000 0x80
-			       0x1b600000 0x100
-			       0x0ff00000 0x100000>;
+			reg = <0x1b500000 0x1000>,
+			      <0x1b502000 0x80>,
+			      <0x1b600000 0x100>,
+			      <0x0ff00000 0x100000>;
 			reg-names = "dbi", "elbi", "parf", "config";
 			device_type = "pci";
 			linux,pci-domain = <0>;
@@ -1379,8 +1382,8 @@
 			num-lanes = <1>;
 			#address-cells = <3>;
 			#size-cells = <2>;
-			ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000   /* I/O */
-				  0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* memory */
+			ranges = <0x81000000 0 0          0x0fe00000 0 0x00100000>, /* I/O */
+				 <0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* mem */
 			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
 			#interrupt-cells = <1>;
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index 7dec0553636e..a9d0566a3190 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -142,7 +142,8 @@
 	clocks {
 		sleep_clk: sleep_clk {
 			compatible = "fixed-clock";
-			clock-frequency = <32768>;
+			clock-frequency = <32000>;
+			clock-output-names = "gcc_sleep_clk_src";
 			#clock-cells = <0>;
 		};
 
@@ -186,6 +187,7 @@
 		gcc: clock-controller@1800000 {
 			compatible = "qcom,gcc-ipq4019";
 			#clock-cells = <1>;
+			#power-domain-cells = <1>;
 			#reset-cells = <1>;
 			reg = <0x1800000 0x60000>;
 		};
diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi
index c32415f0e66d..4d4f37cebf21 100644
--- a/arch/arm/boot/dts/qcom-mdm9615.dtsi
+++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi
@@ -139,6 +139,7 @@
 		gcc: clock-controller@900000 {
 			compatible = "qcom,gcc-mdm9615";
 			#clock-cells = <1>;
+			#power-domain-cells = <1>;
 			#reset-cells = <1>;
 			reg = <0x900000 0x4000>;
 		};
@@ -151,7 +152,7 @@
 		};
 
 		l2cc: clock-controller@2011000 {
-			compatible = "syscon";
+			compatible = "qcom,kpss-gcc", "syscon";
 			reg = <0x02011000 0x1000>;
 		};
 
diff --git a/arch/arm/boot/dts/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom-msm8226.dtsi
index 7d48599502b3..85e56992d2d0 100644
--- a/arch/arm/boot/dts/qcom-msm8226.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8226.dtsi
@@ -8,6 +8,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-msm8974.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/reset/qcom,gcc-msm8974.h>
 
 / {
 	#address-cells = <1>;
@@ -72,6 +73,35 @@
 			rpm_requests: rpm-requests {
 				compatible = "qcom,rpm-msm8226";
 				qcom,smd-channels = "rpm_requests";
+
+				rpmpd: power-controller {
+					compatible = "qcom,msm8226-rpmpd";
+					#power-domain-cells = <1>;
+					operating-points-v2 = <&rpmpd_opp_table>;
+
+					rpmpd_opp_table: opp-table {
+						compatible = "operating-points-v2";
+
+						rpmpd_opp_ret: opp1 {
+							opp-level = <1>;
+						};
+						rpmpd_opp_svs_krait: opp2 {
+							opp-level = <2>;
+						};
+						rpmpd_opp_svs_soc: opp3 {
+							opp-level = <3>;
+						};
+						rpmpd_opp_nom: opp4 {
+							opp-level = <4>;
+						};
+						rpmpd_opp_turbo: opp5 {
+							opp-level = <5>;
+						};
+						rpmpd_opp_super_turbo: opp6 {
+							opp-level = <6>;
+						};
+					};
+				};
 			};
 		};
 	};
@@ -115,6 +145,8 @@
 				 <&gcc GCC_SDCC1_AHB_CLK>,
 				 <&xo_board>;
 			clock-names = "core", "iface", "xo";
+			pinctrl-names = "default";
+			pinctrl-0 = <&sdhc1_default_state>;
 			status = "disabled";
 		};
 
@@ -129,6 +161,8 @@
 				 <&gcc GCC_SDCC2_AHB_CLK>,
 				 <&xo_board>;
 			clock-names = "core", "iface", "xo";
+			pinctrl-names = "default";
+			pinctrl-0 = <&sdhc2_default_state>;
 			status = "disabled";
 		};
 
@@ -143,6 +177,8 @@
 				 <&gcc GCC_SDCC3_AHB_CLK>,
 				 <&xo_board>;
 			clock-names = "core", "iface", "xo";
+			pinctrl-names = "default";
+			pinctrl-0 = <&sdhc3_default_state>;
 			status = "disabled";
 		};
 
@@ -229,6 +265,44 @@
 			#size-cells = <0>;
 		};
 
+		usb: usb@f9a55000 {
+			compatible = "qcom,ci-hdrc";
+			reg = <0xf9a55000 0x200>,
+			      <0xf9a55200 0x200>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_USB_HS_AHB_CLK>,
+				 <&gcc GCC_USB_HS_SYSTEM_CLK>;
+			clock-names = "iface", "core";
+			assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
+			assigned-clock-rates = <75000000>;
+			resets = <&gcc GCC_USB_HS_BCR>;
+			reset-names = "core";
+			phy_type = "ulpi";
+			dr_mode = "otg";
+			hnp-disable;
+			srp-disable;
+			adp-disable;
+			ahb-burst-config = <0>;
+			phy-names = "usb-phy";
+			phys = <&usb_hs_phy>;
+			status = "disabled";
+			#reset-cells = <1>;
+
+			ulpi {
+				usb_hs_phy: phy {
+					compatible = "qcom,usb-hs-phy-msm8226",
+						     "qcom,usb-hs-phy";
+					#phy-cells = <0>;
+					clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+					clock-names = "ref", "sleep";
+					resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>;
+					reset-names = "phy", "por";
+					qcom,init-seq = /bits/ 8 <0x0 0x44
+						0x1 0x68 0x2 0x24 0x3 0x13>;
+				};
+			};
+		};
+
 		gcc: clock-controller@fc400000 {
 			compatible = "qcom,gcc-msm8226";
 			reg = <0xfc400000 0x4000>;
@@ -281,6 +355,57 @@
 				drive-strength = <2>;
 				bias-disable;
 			};
+
+			sdhc1_default_state: sdhc1-default-state {
+				clk {
+					pins = "sdc1_clk";
+					drive-strength = <10>;
+					bias-disable;
+				};
+
+				cmd-data {
+					pins = "sdc1_cmd", "sdc1_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+			};
+
+			sdhc2_default_state: sdhc2-default-state {
+				clk {
+					pins = "sdc2_clk";
+					drive-strength = <10>;
+					bias-disable;
+				};
+
+				cmd-data {
+					pins = "sdc2_cmd", "sdc2_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+			};
+
+			sdhc3_default_state: sdhc3-default-state {
+				clk {
+					pins = "gpio44";
+					function = "sdc3";
+					drive-strength = <8>;
+					bias-disable;
+				};
+
+				cmd {
+					pins = "gpio43";
+					function = "sdc3";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
+
+				data {
+					pins = "gpio39", "gpio40", "gpio41", "gpio42";
+					function = "sdc3";
+					drive-strength = <8>;
+					bias-pull-up;
+				};
+			};
 		};
 
 		restart@fc4ab000 {
diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
index 1e8aab357f9c..a258abb23a64 100644
--- a/arch/arm/boot/dts/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
@@ -126,6 +126,7 @@
 		gcc: clock-controller@900000 {
 			compatible = "qcom,gcc-msm8660";
 			#clock-cells = <1>;
+			#power-domain-cells = <1>;
 			#reset-cells = <1>;
 			reg = <0x900000 0x4000>;
 		};
@@ -390,7 +391,7 @@
 		};
 
 		l2cc: clock-controller@2082000 {
-			compatible	= "syscon";
+			compatible	= "qcom,kpss-gcc", "syscon";
 			reg		= <0x02082000 0x1000>;
 		};
 
diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
index 4af01039c3b2..d1fd0fe12ffe 100644
--- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts
+++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
@@ -279,7 +279,7 @@
 			pinctrl-0 = <&spi1_default>;
 			spi@16080000 {
 				status = "okay";
-				eth@0 {
+				ethernet@0 {
 					compatible = "micrel,ks8851";
 					reg = <0>;
 					interrupt-parent = <&msmgpio>;
diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi
index 2a0ec97a264f..4a2d74cf01d2 100644
--- a/arch/arm/boot/dts/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8960.dtsi
@@ -78,6 +78,15 @@
 		};
 	};
 
+	/* Temporary fixed regulator */
+	vsdcc_fixed: vsdcc-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "SDCC Power";
+		regulator-min-microvolt = <2700000>;
+		regulator-max-microvolt = <2700000>;
+		regulator-always-on;
+	};
+
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -118,6 +127,7 @@
 		gcc: clock-controller@900000 {
 			compatible = "qcom,gcc-msm8960";
 			#clock-cells = <1>;
+			#power-domain-cells = <1>;
 			#reset-cells = <1>;
 			reg = <0x900000 0x4000>;
 		};
@@ -133,11 +143,12 @@
 			compatible = "qcom,mmcc-msm8960";
 			reg = <0x4000000 0x1000>;
 			#clock-cells = <1>;
+			#power-domain-cells = <1>;
 			#reset-cells = <1>;
 		};
 
 		l2cc: clock-controller@2011000 {
-			compatible	= "syscon";
+			compatible	= "qcom,kpss-gcc", "syscon";
 			reg		= <0x2011000 0x1000>;
 		};
 
@@ -146,7 +157,9 @@
 			reg		= <0x108000 0x1000>;
 			qcom,ipc	= <&l2cc 0x8 2>;
 
-			interrupts	= <0 19 0>, <0 21 0>, <0 22 0>;
+			interrupts	= <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
+					  <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+					  <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names	= "ack", "err", "wakeup";
 
 			regulators {
@@ -192,7 +205,7 @@
 				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 				reg = <0x16440000 0x1000>,
 				      <0x16400000 0x1000>;
-				interrupts = <0 154 0x0>;
+				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
 				clock-names = "core", "iface";
 				status = "disabled";
@@ -249,15 +262,6 @@
 			clock-names = "core";
 		};
 
-		/* Temporary fixed regulator */
-		vsdcc_fixed: vsdcc-regulator {
-			compatible = "regulator-fixed";
-			regulator-name = "SDCC Power";
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <2700000>;
-			regulator-always-on;
-		};
-
 		amba {
 			compatible = "simple-bus";
 			#address-cells = <1>;
@@ -318,7 +322,7 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x16080000 0x1000>;
-				interrupts = <0 147 0>;
+				interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
 				spi-max-frequency = <24000000>;
 				cs-gpios = <&msmgpio 8 0>;
 
diff --git a/arch/arm/boot/dts/qcom-pm8226.dtsi b/arch/arm/boot/dts/qcom-pm8226.dtsi
index dddb5150dfd7..b3d0f7b5874d 100644
--- a/arch/arm/boot/dts/qcom-pm8226.dtsi
+++ b/arch/arm/boot/dts/qcom-pm8226.dtsi
@@ -16,6 +16,39 @@
 			debounce = <15625>;
 			bias-pull-up;
 		};
+
+		smbb: charger@1000 {
+			compatible = "qcom,pm8226-charger";
+			reg = <0x1000>;
+			interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>,
+				     <0x0 0x14 1 IRQ_TYPE_EDGE_BOTH>;
+			interrupt-names = "chg-done",
+					  "chg-fast",
+					  "chg-trkl",
+					  "bat-temp-ok",
+					  "bat-present",
+					  "chg-gone",
+					  "usb-valid",
+					  "dc-valid";
+
+			chg_otg: otg-vbus { };
+		};
+
+		pm8226_mpps: mpps@a000 {
+			compatible = "qcom,pm8226-mpp", "qcom,spmi-mpp";
+			reg = <0xa000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pm8226_mpps 0 0 8>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
 	};
 
 	pm8226_1: pm8226@1 {
@@ -23,5 +56,15 @@
 		reg = <0x1 SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+
+		pm8226_spmi_regulators: pm8226-regulators {
+			compatible = "qcom,pm8226-regulators";
+		};
+
+		pm8226_vib: vibrator@c000 {
+			compatible = "qcom,pm8916-vib";
+			reg = <0xc000>;
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi
index 8ac0492c7659..d455795da44c 100644
--- a/arch/arm/boot/dts/qcom-sdx55.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx55.dtsi
@@ -413,7 +413,7 @@
 			      <0x40000000 0xf1d>,
 			      <0x40000f20 0xc8>,
 			      <0x40001000 0x1000>,
-			      <0x40002000 0x10000>,
+			      <0x40200000 0x100000>,
 			      <0x01c03000 0x3000>;
 			reg-names = "parf", "dbi", "elbi", "atu", "addr_space",
 				    "mmio";
@@ -536,7 +536,7 @@
 			reg = <0x0c264000 0x1000>;
 		};
 
-		spmi_bus: qcom,spmi@c440000 {
+		spmi_bus: spmi@c440000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0x0c440000 0x0000d00>,
 			      <0x0c600000 0x2000000>,
diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
index a01f3def1c69..0af63ddc4473 100644
--- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
+++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
@@ -266,7 +266,7 @@
 		function = "lcd0";
 	};
 
-	lcd0_mux {
+	lcd0-mux-hog {
 		/* DBGMD/LCDC0/FSIA MUX */
 		gpio-hog;
 		gpios = <176 0>;
diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
index 3c8a7c8b1fdd..4e58c54cde17 100644
--- a/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts
@@ -91,10 +91,10 @@
 
 &gpio0 {
 	/* Disable hogging GP0_18 to output LOW */
-	/delete-node/ qspi_en;
+	/delete-node/ qspi-en-hog;
 
 	/* Hog GP0_18 to output HIGH to enable VIN2 */
-	vin2_en {
+	vin2-en-hog {
 		gpio-hog;
 		gpios = <18 GPIO_ACTIVE_HIGH>;
 		output-high;
diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
index a5a79cdbcd0e..64102b664055 100644
--- a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
@@ -226,7 +226,7 @@
 };
 
 &gpio0 {
-	touch-interrupt {
+	touch-interrupt-hog {
 		gpio-hog;
 		gpios = <24 GPIO_ACTIVE_LOW>;
 		input;
@@ -234,7 +234,7 @@
 };
 
 &gpio1 {
-	can-trx-en-gpio{
+	can-trx-en-hog {
 		gpio-hog;
 		gpios = <28 GPIO_ACTIVE_HIGH>;
 		output-low;
diff --git a/arch/arm/boot/dts/r8a7742-iwg21m.dtsi b/arch/arm/boot/dts/r8a7742-iwg21m.dtsi
index 5621c9ed698f..b281a4d164b0 100644
--- a/arch/arm/boot/dts/r8a7742-iwg21m.dtsi
+++ b/arch/arm/boot/dts/r8a7742-iwg21m.dtsi
@@ -37,7 +37,7 @@
 
 &gpio0 {
 	/* GP0_18 set low to select QSPI. Doing so will disable VIN2 */
-	qspi_en {
+	qspi-en-hog {
 		gpio-hog;
 		gpios = <18 GPIO_ACTIVE_HIGH>;
 		output-low;
diff --git a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
index b024621c9981..644802285249 100644
--- a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
+++ b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
@@ -116,7 +116,7 @@
 };
 
 &gpio2 {
-	interrupt-fixup {
+	interrupt-fixup-hog {
 		gpio-hog;
 		gpios = <29 GPIO_ACTIVE_HIGH>;
 		line-name = "hdmi-hpd-int";
diff --git a/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts b/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts
index 4e57ae2688fc..3f8f3ce87e12 100644
--- a/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts
+++ b/arch/arm/boot/dts/r9a06g032-rzn1d400-db.dts
@@ -26,3 +26,8 @@
 &uart0 {
 	status = "okay";
 };
+
+&wdt0 {
+	timeout-sec = <60>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/r9a06g032.dtsi b/arch/arm/boot/dts/r9a06g032.dtsi
index c47896e4ab58..636a6ab31c58 100644
--- a/arch/arm/boot/dts/r9a06g032.dtsi
+++ b/arch/arm/boot/dts/r9a06g032.dtsi
@@ -66,6 +66,22 @@
 		interrupt-parent = <&gic>;
 		ranges;
 
+		wdt0: watchdog@40008000 {
+			compatible = "renesas,r9a06g032-wdt", "renesas,rzn1-wdt";
+			reg = <0x40008000 0x1000>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&sysctrl R9A06G032_CLK_WATCHDOG>;
+			status = "disabled";
+		};
+
+		wdt1: watchdog@40009000 {
+			compatible = "renesas,r9a06g032-wdt", "renesas,rzn1-wdt";
+			reg = <0x40009000 0x1000>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&sysctrl R9A06G032_CLK_WATCHDOG>;
+			status = "disabled";
+		};
+
 		sysctrl: system-controller@4000c000 {
 			compatible = "renesas,r9a06g032-sysctrl";
 			reg = <0x4000c000 0x1000>;
@@ -173,6 +189,17 @@
 			status = "okay";
 		};
 
+		nand_controller: nand-controller@40102000 {
+			compatible = "renesas,r9a06g032-nandc", "renesas,rzn1-nandc";
+			reg = <0x40102000 0x2000>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sysctrl R9A06G032_HCLK_NAND>, <&sysctrl R9A06G032_CLK_NAND>;
+			clock-names = "hclk", "eclk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		gic: interrupt-controller@44101000 {
 			compatible = "arm,gic-400", "arm,cortex-a7-gic";
 			interrupt-controller;
diff --git a/arch/arm/boot/dts/rk3188-px3-evb.dts b/arch/arm/boot/dts/rk3188-px3-evb.dts
index 39c60426c9c9..fc478ac4e781 100644
--- a/arch/arm/boot/dts/rk3188-px3-evb.dts
+++ b/arch/arm/boot/dts/rk3188-px3-evb.dts
@@ -212,7 +212,7 @@
 				regulator-name = "wl_18";
 			};
 
-			lcd_33: SWITCH_REG1 {
+			lcd_33: SWITCH_REG {
 				regulator-name = "lcd_33";
 			};
 		};
diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi
index 8eed9e3a92e9..5868eb512f69 100644
--- a/arch/arm/boot/dts/rk322x.dtsi
+++ b/arch/arm/boot/dts/rk322x.dtsi
@@ -718,8 +718,8 @@
 		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 		assigned-clocks = <&cru SCLK_HDMI_PHY>;
 		assigned-clock-parents = <&hdmi_phy>;
-		clocks = <&cru SCLK_HDMI_HDCP>, <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_CEC>;
-		clock-names = "isfr", "iahb", "cec";
+		clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>, <&cru SCLK_HDMI_CEC>;
+		clock-names = "iahb", "isfr", "cec";
 		pinctrl-names = "default";
 		pinctrl-0 = <&hdmii2c_xfer &hdmi_hpd &hdmi_cec>;
 		resets = <&cru SRST_HDMI_P>;
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index aaaa61875701..26b9bbe310af 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -971,7 +971,7 @@
 		status = "disabled";
 	};
 
-	crypto: cypto-controller@ff8a0000 {
+	crypto: crypto@ff8a0000 {
 		compatible = "rockchip,rk3288-crypto";
 		reg = <0x0 0xff8a0000 0x0 0x4000>;
 		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
@@ -980,7 +980,6 @@
 		clock-names = "aclk", "hclk", "sclk", "apb_pclk";
 		resets = <&cru SRST_CRYPTO>;
 		reset-names = "crypto-rst";
-		status = "okay";
 	};
 
 	iep_mmu: iommu@ff900800 {
diff --git a/arch/arm/boot/dts/rv1108-elgin-r1.dts b/arch/arm/boot/dts/rv1108-elgin-r1.dts
index f62c9f7af79d..0c99a5934ebf 100644
--- a/arch/arm/boot/dts/rv1108-elgin-r1.dts
+++ b/arch/arm/boot/dts/rv1108-elgin-r1.dts
@@ -72,6 +72,7 @@
 		interrupt-parent = <&gpio0>;
 		interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>;
 		rockchip,system-power-controller;
+		#clock-cells = <0>;
 
 		vcc1-supply = <&vcc_sys>;
 		vcc2-supply = <&vcc_sys>;
diff --git a/arch/arm/boot/dts/rv1108-evb.dts b/arch/arm/boot/dts/rv1108-evb.dts
index fe5fc9bf75c9..46cad7cb94bf 100644
--- a/arch/arm/boot/dts/rv1108-evb.dts
+++ b/arch/arm/boot/dts/rv1108-evb.dts
@@ -85,6 +85,7 @@
 		interrupt-parent = <&gpio0>;
 		interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>;
 		rockchip,system-power-controller;
+		#clock-cells = <0>;
 
 		vcc1-supply = <&vcc_sys>;
 		vcc2-supply = <&vcc_sys>;
diff --git a/arch/arm/boot/dts/s3c2416-pinctrl.dtsi b/arch/arm/boot/dts/s3c2416-pinctrl.dtsi
index 92439ee5d7de..20a7d72827c2 100644
--- a/arch/arm/boot/dts/s3c2416-pinctrl.dtsi
+++ b/arch/arm/boot/dts/s3c2416-pinctrl.dtsi
@@ -12,66 +12,66 @@
 	 * Pin banks
 	 */
 
-	gpa: gpa {
+	gpa: gpa-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpb: gpb {
+	gpb: gpb-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpc: gpc {
+	gpc: gpc-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpd: gpd {
+	gpd: gpd-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpe: gpe {
+	gpe: gpe-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpf: gpf {
+	gpf: gpf-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
 
-	gpg: gpg {
+	gpg: gpg-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
 
-	gph: gph {
+	gph: gph-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpj: gpj {
+	gpj: gpj-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpk: gpk {
+	gpk: gpk-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpl: gpl {
+	gpl: gpl-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpm: gpm {
+	gpm: gpm-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
@@ -80,92 +80,92 @@
 	 * Pin groups
 	 */
 
-	uart0_data: uart0-data {
+	uart0_data: uart0-data-pins {
 		samsung,pins = "gph-0", "gph-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
-	uart0_fctl: uart0-fctl {
+	uart0_fctl: uart0-fctl-pins {
 		samsung,pins = "gph-8", "gph-9";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
-	uart1_data: uart1-data {
+	uart1_data: uart1-data-pins {
 		samsung,pins = "gph-2", "gph-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
-	uart1_fctl: uart1-fctl {
+	uart1_fctl: uart1-fctl-pins {
 		samsung,pins = "gph-10", "gph-11";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
-	uart2_data: uart2-data {
+	uart2_data: uart2-data-pins {
 		samsung,pins = "gph-4", "gph-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
-	uart2_fctl: uart2-fctl {
+	uart2_fctl: uart2-fctl-pins {
 		samsung,pins = "gph-6", "gph-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
-	uart3_data: uart3-data {
+	uart3_data: uart3-data-pins {
 		samsung,pins = "gph-6", "gph-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
-	extuart_clk: extuart-clk {
+	extuart_clk: extuart-clk-pins {
 		samsung,pins = "gph-12";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
-	i2c0_bus: i2c0-bus {
+	i2c0_bus: i2c0-bus-pins {
 		samsung,pins = "gpe-14", "gpe-15";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
-	spi0_bus: spi0-bus {
+	spi0_bus: spi0-bus-pins {
 		samsung,pins = "gpe-11", "gpe-12", "gpe-13";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
-	sd0_clk: sd0-clk {
+	sd0_clk: sd0-clk-pins {
 		samsung,pins = "gpe-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
-	sd0_cmd: sd0-cmd {
+	sd0_cmd: sd0-cmd-pins {
 		samsung,pins = "gpe-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
-	sd0_bus1: sd0-bus1 {
+	sd0_bus1: sd0-bus1-pins {
 		samsung,pins = "gpe-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
-	sd0_bus4: sd0-bus4 {
+	sd0_bus4: sd0-bus4-pins {
 		samsung,pins = "gpe-8", "gpe-9", "gpe-10";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
-	sd1_cmd: sd1-cmd {
+	sd1_cmd: sd1-cmd-pins {
 		samsung,pins = "gpl-8";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
-	sd1_clk: sd1-clk {
+	sd1_clk: sd1-clk-pins {
 		samsung,pins = "gpl-9";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
-	sd1_bus1: sd1-bus1 {
+	sd1_bus1: sd1-bus1-pins {
 		samsung,pins = "gpl-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
-	sd1_bus4: sd1-bus4 {
+	sd1_bus4: sd1-bus4-pins {
 		samsung,pins = "gpl-1", "gpl-2", "gpl-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
diff --git a/arch/arm/boot/dts/s3c6410-mini6410.dts b/arch/arm/boot/dts/s3c6410-mini6410.dts
index 285555b9ed94..17097da36f5e 100644
--- a/arch/arm/boot/dts/s3c6410-mini6410.dts
+++ b/arch/arm/boot/dts/s3c6410-mini6410.dts
@@ -193,12 +193,12 @@
 };
 
 &pinctrl0 {
-	gpio_leds: gpio-leds {
+	gpio_leds: gpio-leds-pins {
 		samsung,pins = "gpk-4", "gpk-5", "gpk-6", "gpk-7";
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	gpio_keys: gpio-keys {
+	gpio_keys: gpio-keys-pins {
 		samsung,pins = "gpn-0", "gpn-1", "gpn-2", "gpn-3",
 				"gpn-4", "gpn-5", "gpl-11", "gpl-12";
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
diff --git a/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi b/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi
index 8e9594d64b57..0a3186d57cb5 100644
--- a/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi
+++ b/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi
@@ -16,111 +16,111 @@
 	 * Pin banks
 	 */
 
-	gpa: gpa {
+	gpa: gpa-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
 
-	gpb: gpb {
+	gpb: gpb-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
 
-	gpc: gpc {
+	gpc: gpc-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
 
-	gpd: gpd {
+	gpd: gpd-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
 
-	gpe: gpe {
+	gpe: gpe-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpf: gpf {
+	gpf: gpf-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
 
-	gpg: gpg {
+	gpg: gpg-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
 
-	gph: gph {
+	gph: gph-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
 
-	gpi: gpi {
+	gpi: gpi-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpj: gpj {
+	gpj: gpj-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpk: gpk {
+	gpk: gpk-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpl: gpl {
+	gpl: gpl-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
 
-	gpm: gpm {
+	gpm: gpm-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
 
-	gpn: gpn {
+	gpn: gpn-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
 
-	gpo: gpo {
+	gpo: gpo-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
 
-	gpp: gpp {
+	gpp: gpp-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
 
-	gpq: gpq {
+	gpq: gpq-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
@@ -131,225 +131,225 @@
 	 * Pin groups
 	 */
 
-	uart0_data: uart0-data {
+	uart0_data: uart0-data-pins {
 		samsung,pins = "gpa-0", "gpa-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	uart0_fctl: uart0-fctl {
+	uart0_fctl: uart0-fctl-pins {
 		samsung,pins = "gpa-2", "gpa-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	uart1_data: uart1-data {
+	uart1_data: uart1-data-pins {
 		samsung,pins = "gpa-4", "gpa-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	uart1_fctl: uart1-fctl {
+	uart1_fctl: uart1-fctl-pins {
 		samsung,pins = "gpa-6", "gpa-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	uart2_data: uart2-data {
+	uart2_data: uart2-data-pins {
 		samsung,pins = "gpb-0", "gpb-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	uart3_data: uart3-data {
+	uart3_data: uart3-data-pins {
 		samsung,pins = "gpb-2", "gpb-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	ext_dma_0: ext-dma-0 {
+	ext_dma_0: ext-dma-0-pins {
 		samsung,pins = "gpb-0", "gpb-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	ext_dma_1: ext-dma-1 {
+	ext_dma_1: ext-dma-1-pins {
 		samsung,pins = "gpb-2", "gpb-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	irda_data_0: irda-data-0 {
+	irda_data_0: irda-data-0-pins {
 		samsung,pins = "gpb-0", "gpb-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	irda_data_1: irda-data-1 {
+	irda_data_1: irda-data-1-pins {
 		samsung,pins = "gpb-2", "gpb-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	irda_sdbw: irda-sdbw {
+	irda_sdbw: irda-sdbw-pins {
 		samsung,pins = "gpb-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	i2c0_bus: i2c0-bus {
+	i2c0_bus: i2c0-bus-pins {
 		samsung,pins = "gpb-5", "gpb-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 	};
 
-	i2c1_bus: i2c1-bus {
+	i2c1_bus: i2c1-bus-pins {
 		/* S3C6410-only */
 		samsung,pins = "gpb-2", "gpb-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_6>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 	};
 
-	spi0_bus: spi0-bus {
+	spi0_bus: spi0-bus-pins {
 		samsung,pins = "gpc-0", "gpc-1", "gpc-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 	};
 
-	spi0_cs: spi0-cs {
+	spi0_cs: spi0-cs-pins {
 		samsung,pins = "gpc-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	spi1_bus: spi1-bus {
+	spi1_bus: spi1-bus-pins {
 		samsung,pins = "gpc-4", "gpc-5", "gpc-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 	};
 
-	spi1_cs: spi1-cs {
+	spi1_cs: spi1-cs-pins {
 		samsung,pins = "gpc-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	sd0_cmd: sd0-cmd {
+	sd0_cmd: sd0-cmd-pins {
 		samsung,pins = "gpg-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	sd0_clk: sd0-clk {
+	sd0_clk: sd0-clk-pins {
 		samsung,pins = "gpg-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	sd0_bus1: sd0-bus1 {
+	sd0_bus1: sd0-bus1-pins {
 		samsung,pins = "gpg-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	sd0_bus4: sd0-bus4 {
+	sd0_bus4: sd0-bus4-pins {
 		samsung,pins = "gpg-2", "gpg-3", "gpg-4", "gpg-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	sd0_cd: sd0-cd {
+	sd0_cd: sd0-cd-pins {
 		samsung,pins = "gpg-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 	};
 
-	sd1_cmd: sd1-cmd {
+	sd1_cmd: sd1-cmd-pins {
 		samsung,pins = "gph-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	sd1_clk: sd1-clk {
+	sd1_clk: sd1-clk-pins {
 		samsung,pins = "gph-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	sd1_bus1: sd1-bus1 {
+	sd1_bus1: sd1-bus1-pins {
 		samsung,pins = "gph-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	sd1_bus4: sd1-bus4 {
+	sd1_bus4: sd1-bus4-pins {
 		samsung,pins = "gph-2", "gph-3", "gph-4", "gph-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	sd1_bus8: sd1-bus8 {
+	sd1_bus8: sd1-bus8-pins {
 		samsung,pins = "gph-2", "gph-3", "gph-4", "gph-5",
 				"gph-6", "gph-7", "gph-8", "gph-9";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	sd1_cd: sd1-cd {
+	sd1_cd: sd1-cd-pins {
 		samsung,pins = "gpg-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 	};
 
-	sd2_cmd: sd2-cmd {
+	sd2_cmd: sd2-cmd-pins {
 		samsung,pins = "gpc-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	sd2_clk: sd2-clk {
+	sd2_clk: sd2-clk-pins {
 		samsung,pins = "gpc-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	sd2_bus1: sd2-bus1 {
+	sd2_bus1: sd2-bus1-pins {
 		samsung,pins = "gph-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	sd2_bus4: sd2-bus4 {
+	sd2_bus4: sd2-bus4-pins {
 		samsung,pins = "gph-6", "gph-7", "gph-8", "gph-9";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	i2s0_bus: i2s0-bus {
+	i2s0_bus: i2s0-bus-pins {
 		samsung,pins = "gpd-0", "gpd-2", "gpd-3", "gpd-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	i2s0_cdclk: i2s0-cdclk {
+	i2s0_cdclk: i2s0-cdclk-pins {
 		samsung,pins = "gpd-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	i2s1_bus: i2s1-bus {
+	i2s1_bus: i2s1-bus-pins {
 		samsung,pins = "gpe-0", "gpe-2", "gpe-3", "gpe-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	i2s1_cdclk: i2s1-cdclk {
+	i2s1_cdclk: i2s1-cdclk-pins {
 		samsung,pins = "gpe-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	i2s2_bus: i2s2-bus {
+	i2s2_bus: i2s2-bus-pins {
 		/* S3C6410-only */
 		samsung,pins = "gpc-4", "gpc-5", "gpc-6", "gph-6",
 				"gph-8", "gph-9";
@@ -357,50 +357,50 @@
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	i2s2_cdclk: i2s2-cdclk {
+	i2s2_cdclk: i2s2-cdclk-pins {
 		/* S3C6410-only */
 		samsung,pins = "gph-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	pcm0_bus: pcm0-bus {
+	pcm0_bus: pcm0-bus-pins {
 		samsung,pins = "gpd-0", "gpd-2", "gpd-3", "gpd-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	pcm0_extclk: pcm0-extclk {
+	pcm0_extclk: pcm0-extclk-pins {
 		samsung,pins = "gpd-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	pcm1_bus: pcm1-bus {
+	pcm1_bus: pcm1-bus-pins {
 		samsung,pins = "gpe-0", "gpe-2", "gpe-3", "gpe-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	pcm1_extclk: pcm1-extclk {
+	pcm1_extclk: pcm1-extclk-pins {
 		samsung,pins = "gpe-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	ac97_bus_0: ac97-bus-0 {
+	ac97_bus_0: ac97-bus-0-pins {
 		samsung,pins = "gpd-0", "gpd-1", "gpd-2", "gpd-3", "gpd-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	ac97_bus_1: ac97-bus-1 {
+	ac97_bus_1: ac97-bus-1-pins {
 		samsung,pins = "gpe-0", "gpe-1", "gpe-2", "gpe-3", "gpe-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	cam_port: cam-port {
+	cam_port: cam-port-pins {
 		samsung,pins = "gpf-0", "gpf-1", "gpf-2", "gpf-4",
 				"gpf-5", "gpf-6", "gpf-7", "gpf-8",
 				"gpf-9", "gpf-10", "gpf-11", "gpf-12";
@@ -408,242 +408,242 @@
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	cam_rst: cam-rst {
+	cam_rst: cam-rst-pins {
 		samsung,pins = "gpf-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	cam_field: cam-field {
+	cam_field: cam-field-pins {
 		/* S3C6410-only */
 		samsung,pins = "gpb-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	pwm_extclk: pwm-extclk {
+	pwm_extclk: pwm-extclk-pins {
 		samsung,pins = "gpf-13";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	pwm0_out: pwm0-out {
+	pwm0_out: pwm0-out-pins {
 		samsung,pins = "gpf-14";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	pwm1_out: pwm1-out {
+	pwm1_out: pwm1-out-pins {
 		samsung,pins = "gpf-15";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	clkout0: clkout-0 {
+	clkout0: clkout-0-pins {
 		samsung,pins = "gpf-14";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col0_0: keypad-col0-0 {
+	keypad_col0_0: keypad-col0-0-pins {
 		samsung,pins = "gph-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col1_0: keypad-col1-0 {
+	keypad_col1_0: keypad-col1-0-pins {
 		samsung,pins = "gph-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col2_0: keypad-col2-0 {
+	keypad_col2_0: keypad-col2-0-pins {
 		samsung,pins = "gph-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col3_0: keypad-col3-0 {
+	keypad_col3_0: keypad-col3-0-pins {
 		samsung,pins = "gph-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col4_0: keypad-col4-0 {
+	keypad_col4_0: keypad-col4-0-pins {
 		samsung,pins = "gph-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col5_0: keypad-col5-0 {
+	keypad_col5_0: keypad-col5-0-pins {
 		samsung,pins = "gph-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col6_0: keypad-col6-0 {
+	keypad_col6_0: keypad-col6-0-pins {
 		samsung,pins = "gph-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col7_0: keypad-col7-0 {
+	keypad_col7_0: keypad-col7-0-pins {
 		samsung,pins = "gph-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col0_1: keypad-col0-1 {
+	keypad_col0_1: keypad-col0-1-pins {
 		samsung,pins = "gpl-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col1_1: keypad-col1-1 {
+	keypad_col1_1: keypad-col1-1-pins {
 		samsung,pins = "gpl-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col2_1: keypad-col2-1 {
+	keypad_col2_1: keypad-col2-1-pins {
 		samsung,pins = "gpl-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col3_1: keypad-col3-1 {
+	keypad_col3_1: keypad-col3-1-pins {
 		samsung,pins = "gpl-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col4_1: keypad-col4-1 {
+	keypad_col4_1: keypad-col4-1-pins {
 		samsung,pins = "gpl-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col5_1: keypad-col5-1 {
+	keypad_col5_1: keypad-col5-1-pins {
 		samsung,pins = "gpl-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col6_1: keypad-col6-1 {
+	keypad_col6_1: keypad-col6-1-pins {
 		samsung,pins = "gpl-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_col7_1: keypad-col7-1 {
+	keypad_col7_1: keypad-col7-1-pins {
 		samsung,pins = "gpl-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row0_0: keypad-row0-0 {
+	keypad_row0_0: keypad-row0-0-pins {
 		samsung,pins = "gpk-8";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row1_0: keypad-row1-0 {
+	keypad_row1_0: keypad-row1-0-pins {
 		samsung,pins = "gpk-9";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row2_0: keypad-row2-0 {
+	keypad_row2_0: keypad-row2-0-pins {
 		samsung,pins = "gpk-10";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row3_0: keypad-row3-0 {
+	keypad_row3_0: keypad-row3-0-pins {
 		samsung,pins = "gpk-11";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row4_0: keypad-row4-0 {
+	keypad_row4_0: keypad-row4-0-pins {
 		samsung,pins = "gpk-12";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row5_0: keypad-row5-0 {
+	keypad_row5_0: keypad-row5-0-pins {
 		samsung,pins = "gpk-13";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row6_0: keypad-row6-0 {
+	keypad_row6_0: keypad-row6-0-pins {
 		samsung,pins = "gpk-14";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row7_0: keypad-row7-0 {
+	keypad_row7_0: keypad-row7-0-pins {
 		samsung,pins = "gpk-15";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row0_1: keypad-row0-1 {
+	keypad_row0_1: keypad-row0-1-pins {
 		samsung,pins = "gpn-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row1_1: keypad-row1-1 {
+	keypad_row1_1: keypad-row1-1-pins {
 		samsung,pins = "gpn-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row2_1: keypad-row2-1 {
+	keypad_row2_1: keypad-row2-1-pins {
 		samsung,pins = "gpn-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row3_1: keypad-row3-1 {
+	keypad_row3_1: keypad-row3-1-pins {
 		samsung,pins = "gpn-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row4_1: keypad-row4-1 {
+	keypad_row4_1: keypad-row4-1-pins {
 		samsung,pins = "gpn-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row5_1: keypad-row5-1 {
+	keypad_row5_1: keypad-row5-1-pins {
 		samsung,pins = "gpn-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row6_1: keypad-row6-1 {
+	keypad_row6_1: keypad-row6-1-pins {
 		samsung,pins = "gpn-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	keypad_row7_1: keypad-row7-1 {
+	keypad_row7_1: keypad-row7-1-pins {
 		samsung,pins = "gpn-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	lcd_ctrl: lcd-ctrl {
+	lcd_ctrl: lcd-ctrl-pins {
 		samsung,pins = "gpj-8", "gpj-9", "gpj-10", "gpj-11";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	lcd_data16: lcd-data-width16 {
+	lcd_data16: lcd-data-width16-pins {
 		samsung,pins = "gpi-3", "gpi-4", "gpi-5", "gpi-6",
 				"gpi-7", "gpi-10", "gpi-11", "gpi-12",
 				"gpi-13", "gpi-14", "gpi-15", "gpj-3",
@@ -652,7 +652,7 @@
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	lcd_data18: lcd-data-width18 {
+	lcd_data18: lcd-data-width18-pins {
 		samsung,pins = "gpi-2", "gpi-3", "gpi-4", "gpi-5",
 				"gpi-6", "gpi-7", "gpi-10", "gpi-11",
 				"gpi-12", "gpi-13", "gpi-14", "gpi-15",
@@ -662,7 +662,7 @@
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	lcd_data24: lcd-data-width24 {
+	lcd_data24: lcd-data-width24-pins {
 		samsung,pins = "gpi-0", "gpi-1", "gpi-2", "gpi-3",
 				"gpi-4", "gpi-5", "gpi-6", "gpi-7",
 				"gpi-8", "gpi-9", "gpi-10", "gpi-11",
@@ -673,7 +673,7 @@
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	hsi_bus: hsi-bus {
+	hsi_bus: hsi-bus-pins {
 		samsung,pins = "gpk-0", "gpk-1", "gpk-2", "gpk-3",
 				"gpk-4", "gpk-5", "gpk-6", "gpk-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
diff --git a/arch/arm/boot/dts/s3c64xx.dtsi b/arch/arm/boot/dts/s3c64xx.dtsi
index cb11a87dbc42..67a7a66e11d5 100644
--- a/arch/arm/boot/dts/s3c64xx.dtsi
+++ b/arch/arm/boot/dts/s3c64xx.dtsi
@@ -178,20 +178,12 @@
 			interrupt-parent = <&vic1>;
 			interrupts = <21>;
 
-			pctrl_int_map: pinctrl-interrupt-map {
-				interrupt-map = <0 &vic0 0>,
-						<1 &vic0 1>,
-						<2 &vic1 0>,
-						<3 &vic1 1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				#interrupt-cells = <1>;
-			};
-
 			wakeup-interrupt-controller {
 				compatible = "samsung,s3c64xx-wakeup-eint";
-				interrupts = <0>, <1>, <2>, <3>;
-				interrupt-parent = <&pctrl_int_map>;
+				interrupts-extended = <&vic0 0>,
+						      <&vic0 1>,
+						      <&vic1 0>,
+						      <&vic1 1>;
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/s5pv210-aquila.dts b/arch/arm/boot/dts/s5pv210-aquila.dts
index 6423348034b6..54de3bc77c30 100644
--- a/arch/arm/boot/dts/s5pv210-aquila.dts
+++ b/arch/arm/boot/dts/s5pv210-aquila.dts
@@ -391,7 +391,7 @@
 };
 
 &pinctrl0 {
-	t_flash_detect: t-flash-detect {
+	t_flash_detect: t-flash-detect-pins {
 		samsung,pins = "gph3-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi
index 160f8cd9a68d..c8f1c324a6c2 100644
--- a/arch/arm/boot/dts/s5pv210-aries.dtsi
+++ b/arch/arm/boot/dts/s5pv210-aries.dtsi
@@ -645,21 +645,21 @@
 };
 
 &pinctrl0 {
-	bt_reset: bt-reset {
+	bt_reset: bt-reset-pins {
 		samsung,pins = "gpb-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	wlan_bt_en: wlan-bt-en {
+	wlan_bt_en: wlan-bt-en-pins {
 		samsung,pins = "gpb-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-val = <1>;
 	};
 
-	codec_ldo: codec-ldo {
+	codec_ldo: codec-ldo-pins {
 		samsung,pins = "gpf3-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
@@ -671,19 +671,19 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	wlan_gpio_rst: wlan-gpio-rst {
+	wlan_gpio_rst: wlan-gpio-rst-pins {
 		samsung,pins = "gpg1-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	bt_wake: bt-wake {
+	bt_wake: bt-wake-pins {
 		samsung,pins = "gpg3-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	gp2a_irq: gp2a-irq {
+	gp2a_irq: gp2a-irq-pins {
 		samsung,pins = "gph0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
@@ -698,67 +698,67 @@
 		samsung,pin-val = <0>;
 	};
 
-	pmic_irq: pmic-irq {
+	pmic_irq: pmic-irq-pins {
 		samsung,pins = "gph0-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	wifi_host_wake: wifi-host-wake {
+	wifi_host_wake: wifi-host-wake-pins {
 		samsung,pins = "gph2-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	bt_host_wake: bt-host-wake {
+	bt_host_wake: bt-host-wake-pins {
 		samsung,pins = "gph2-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	musb_irq: musq-irq {
+	musb_irq: musq-irq-pins {
 		samsung,pins = "gph2-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	tf_detect: tf-detect {
+	tf_detect: tf-detect-pins {
 		samsung,pins = "gph3-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	wifi_wake: wifi-wake {
+	wifi_wake: wifi-wake-pins {
 		samsung,pins = "gph3-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	magnetometer_i2c_pins: yas529-i2c-pins {
+	magnetometer_i2c_pins: yas529-i2c-pins-pins {
 		samsung,pins = "gpj0-0", "gpj0-1";
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	ts_irq: ts-irq {
+	ts_irq: ts-irq-pins {
 		samsung,pins = "gpj0-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	vibrator_ena: vibrator-ena {
+	vibrator_ena: vibrator-ena-pins {
 		samsung,pins = "gpj1-1";
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	gp2a_power: gp2a-power {
+	gp2a_power: gp2a-power-pins {
 		samsung,pins = "gpj1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
@@ -771,7 +771,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	touchkey_vdd_ena: touchkey-vdd-ena {
+	touchkey_vdd_ena: touchkey-vdd-ena-pins {
 		samsung,pins = "gpj3-2";
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
@@ -789,13 +789,13 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pmic_i2c_pins: pmic-i2c-pins {
+	pmic_i2c_pins: pmic-i2c-pins-pins {
 		samsung,pins = "gpj4-0", "gpj4-3";
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	touchkey_irq: touchkey-irq {
+	touchkey_irq: touchkey-irq-pins {
 		samsung,pins = "gpj4-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
@@ -820,7 +820,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	panel_rst: panel-rst {
+	panel_rst: panel-rst-pins {
 		samsung,pins = "mp05-5";
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
diff --git a/arch/arm/boot/dts/s5pv210-fascinate4g.dts b/arch/arm/boot/dts/s5pv210-fascinate4g.dts
index 7427c84f1126..dfb2ee65e4a8 100644
--- a/arch/arm/boot/dts/s5pv210-fascinate4g.dts
+++ b/arch/arm/boot/dts/s5pv210-fascinate4g.dts
@@ -126,39 +126,39 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&sleep_cfg>;
 
-	headset_det: headset-det {
+	headset_det: headset-det-pins {
 		samsung,pins = "gph0-6", "gph3-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	fg_irq: fg-irq {
+	fg_irq: fg-irq-pins {
 		samsung,pins = "gph3-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	headset_micbias_ena: headset-micbias-ena {
+	headset_micbias_ena: headset-micbias-ena-pins {
 		samsung,pins = "gpj2-5";
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	earpath_sel: earpath-sel {
+	earpath_sel: earpath-sel-pins {
 		samsung,pins = "gpj2-6";
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	main_micbias_ena: main-micbias-ena {
+	main_micbias_ena: main-micbias-ena-pins {
 		samsung,pins = "gpj4-2";
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	/* Based on vendor kernel v2.6.35.7 */
-	sleep_cfg: sleep-cfg {
+	sleep_cfg: sleep-state {
 		PIN_SLP(gpa0-0, PREV, NONE);
 		PIN_SLP(gpa0-1, PREV, NONE);
 		PIN_SLP(gpa0-2, PREV, NONE);
diff --git a/arch/arm/boot/dts/s5pv210-galaxys.dts b/arch/arm/boot/dts/s5pv210-galaxys.dts
index eeec2bdece11..a78caaa1f3c5 100644
--- a/arch/arm/boot/dts/s5pv210-galaxys.dts
+++ b/arch/arm/boot/dts/s5pv210-galaxys.dts
@@ -150,53 +150,53 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&sleep_cfg>;
 
-	fm_i2c_pins: fm-i2c-pins {
+	fm_i2c_pins: fm-i2c-pins-pins {
 		samsung,pins = "gpd1-2", "gpd1-3";
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	headset_det: headset-det {
+	headset_det: headset-det-pins {
 		samsung,pins = "gph0-6", "gph3-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
-	fm_irq: fm-irq {
+	fm_irq: fm-irq-pins {
 		samsung,pins = "gpj2-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	fm_rst: fm-rst {
+	fm_rst: fm-rst-pins {
 		samsung,pins = "gpj2-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	earpath_sel: earpath-sel {
+	earpath_sel: earpath-sel-pins {
 		samsung,pins = "gpj2-6";
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	massmemory_en: massmemory-en {
+	massmemory_en: massmemory-en-pins {
 		samsung,pins = "gpj2-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	micbias_reg_ena: micbias-reg-ena {
+	micbias_reg_ena: micbias-reg-ena-pins {
 		samsung,pins = "gpj4-2";
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	/* Based on CyanogenMod 3.0.101 kernel */
-	sleep_cfg: sleep-cfg {
+	sleep_cfg: sleep-state {
 		PIN_SLP(gpa0-0, PREV, NONE);
 		PIN_SLP(gpa0-1, PREV, NONE);
 		PIN_SLP(gpa0-2, PREV, NONE);
diff --git a/arch/arm/boot/dts/s5pv210-pinctrl.dtsi b/arch/arm/boot/dts/s5pv210-pinctrl.dtsi
index b8c5172c31dd..ae34e7e57892 100644
--- a/arch/arm/boot/dts/s5pv210-pinctrl.dtsi
+++ b/arch/arm/boot/dts/s5pv210-pinctrl.dtsi
@@ -26,7 +26,7 @@
 	}
 
 &pinctrl0 {
-	gpa0: gpa0 {
+	gpa0: gpa0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -34,7 +34,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpa1: gpa1 {
+	gpa1: gpa1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -42,7 +42,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb: gpb {
+	gpb: gpb-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -50,7 +50,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc0: gpc0 {
+	gpc0: gpc0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -58,7 +58,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc1: gpc1 {
+	gpc1: gpc1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -66,7 +66,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd0: gpd0 {
+	gpd0: gpd0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -74,7 +74,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd1: gpd1 {
+	gpd1: gpd1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -82,7 +82,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpe0: gpe0 {
+	gpe0: gpe0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -90,7 +90,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpe1: gpe1 {
+	gpe1: gpe1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -98,7 +98,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf0: gpf0 {
+	gpf0: gpf0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -106,7 +106,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf1: gpf1 {
+	gpf1: gpf1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -114,7 +114,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf2: gpf2 {
+	gpf2: gpf2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -122,7 +122,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf3: gpf3 {
+	gpf3: gpf3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -130,7 +130,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpg0: gpg0 {
+	gpg0: gpg0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -138,7 +138,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpg1: gpg1 {
+	gpg1: gpg1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -146,7 +146,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpg2: gpg2 {
+	gpg2: gpg2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -154,7 +154,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpg3: gpg3 {
+	gpg3: gpg3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -162,7 +162,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpj0: gpj0 {
+	gpj0: gpj0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -170,7 +170,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpj1: gpj1 {
+	gpj1: gpj1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -178,7 +178,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpj2: gpj2 {
+	gpj2: gpj2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -186,7 +186,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpj3: gpj3 {
+	gpj3: gpj3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -194,7 +194,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpj4: gpj4 {
+	gpj4: gpj4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -202,47 +202,47 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpi: gpi {
+	gpi: gpi-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	mp01: mp01 {
+	mp01: mp01-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	mp02: mp02 {
+	mp02: mp02-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	mp03: mp03 {
+	mp03: mp03-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	mp04: mp04 {
+	mp04: mp04-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	mp05: mp05 {
+	mp05: mp05-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	mp06: mp06 {
+	mp06: mp06-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	mp07: mp07 {
+	mp07: mp07-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gph0: gph0 {
+	gph0: gph0-gpio-bank {
 		gpio-controller;
 		interrupt-controller;
 		interrupt-parent = <&vic0>;
@@ -252,7 +252,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gph1: gph1 {
+	gph1: gph1-gpio-bank {
 		gpio-controller;
 		interrupt-controller;
 		interrupt-parent = <&vic0>;
@@ -262,7 +262,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gph2: gph2 {
+	gph2: gph2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -270,7 +270,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gph3: gph3 {
+	gph3: gph3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -278,77 +278,77 @@
 		#interrupt-cells = <2>;
 	};
 
-	uart0_data: uart0-data {
+	uart0_data: uart0-data-pins {
 		samsung,pins = "gpa0-0", "gpa0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart0_fctl: uart0-fctl {
+	uart0_fctl: uart0-fctl-pins {
 		samsung,pins = "gpa0-2", "gpa0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart1_data: uart1-data {
+	uart1_data: uart1-data-pins {
 		samsung,pins = "gpa0-4", "gpa0-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart1_fctl: uart1-fctl {
+	uart1_fctl: uart1-fctl-pins {
 		samsung,pins = "gpa0-6", "gpa0-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart2_data: uart2-data {
+	uart2_data: uart2-data-pins {
 		samsung,pins = "gpa1-0", "gpa1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart2_fctl: uart2-fctl {
+	uart2_fctl: uart2-fctl-pins {
 		samsung,pins = "gpa1-2", "gpa1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart3_data: uart3-data {
+	uart3_data: uart3-data-pins {
 		samsung,pins = "gpa1-2", "gpa1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart_audio: uart-audio {
+	uart_audio: uart-audio-pins {
 		samsung,pins = "gpa1-2", "gpa1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	spi0_bus: spi0-bus {
+	spi0_bus: spi0-bus-pins {
 		samsung,pins = "gpb-0", "gpb-2", "gpb-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	spi1_bus: spi1-bus {
+	spi1_bus: spi1-bus-pins {
 		samsung,pins = "gpb-4", "gpb-6", "gpb-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2s0_bus: i2s0-bus {
+	i2s0_bus: i2s0-bus-pins {
 		samsung,pins = "gpi-0", "gpi-1", "gpi-2", "gpi-3",
 				"gpi-4", "gpi-5", "gpi-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -356,7 +356,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2s1_bus: i2s1-bus {
+	i2s1_bus: i2s1-bus-pins {
 		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
 				"gpc0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -364,7 +364,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2s2_bus: i2s2-bus {
+	i2s2_bus: i2s2-bus-pins {
 		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 				"gpc1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
@@ -372,7 +372,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pcm1_bus: pcm1-bus {
+	pcm1_bus: pcm1-bus-pins {
 		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
 				"gpc0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -380,7 +380,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	ac97_bus: ac97-bus {
+	ac97_bus: ac97-bus-pins {
 		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
 				"gpc0-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
@@ -388,7 +388,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2s2_bus: i2s2-bus {
+	i2s2_bus: i2s2-bus-pins {
 		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 				"gpc1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -396,7 +396,7 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pcm2_bus: pcm2-bus {
+	pcm2_bus: pcm2-bus-pins {
 		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 				"gpc1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -404,371 +404,371 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	spdif_bus: spdif-bus {
+	spdif_bus: spdif-bus-pins {
 		samsung,pins = "gpc1-0", "gpc1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	spi2_bus: spi2-bus {
+	spi2_bus: spi2-bus-pins {
 		samsung,pins = "gpc1-1", "gpc1-2", "gpc1-3", "gpc1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c0_bus: i2c0-bus {
+	i2c0_bus: i2c0-bus-pins {
 		samsung,pins = "gpd1-0", "gpd1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c1_bus: i2c1-bus {
+	i2c1_bus: i2c1-bus-pins {
 		samsung,pins = "gpd1-2", "gpd1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c2_bus: i2c2-bus {
+	i2c2_bus: i2c2-bus-pins {
 		samsung,pins = "gpd1-4", "gpd1-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm0_out: pwm0-out {
+	pwm0_out: pwm0-out-pins {
 		samsung,pins = "gpd0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm1_out: pwm1-out {
+	pwm1_out: pwm1-out-pins {
 		samsung,pins = "gpd0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm2_out: pwm2-out {
+	pwm2_out: pwm2-out-pins {
 		samsung,pins = "gpd0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm3_out: pwm3-out {
+	pwm3_out: pwm3-out-pins {
 		samsung,pins = "gpd0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	keypad_row0: keypad-row-0 {
+	keypad_row0: keypad-row-0-pins {
 		samsung,pins = "gph3-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	keypad_row1: keypad-row-1 {
+	keypad_row1: keypad-row-1-pins {
 		samsung,pins = "gph3-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	keypad_row2: keypad-row-2 {
+	keypad_row2: keypad-row-2-pins {
 		samsung,pins = "gph3-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	keypad_row3: keypad-row-3 {
+	keypad_row3: keypad-row-3-pins {
 		samsung,pins = "gph3-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	keypad_row4: keypad-row-4 {
+	keypad_row4: keypad-row-4-pins {
 		samsung,pins = "gph3-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	keypad_row5: keypad-row-5 {
+	keypad_row5: keypad-row-5-pins {
 		samsung,pins = "gph3-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	keypad_row6: keypad-row-6 {
+	keypad_row6: keypad-row-6-pins {
 		samsung,pins = "gph3-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	keypad_row7: keypad-row-7 {
+	keypad_row7: keypad-row-7-pins {
 		samsung,pins = "gph3-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	keypad_col0: keypad-col-0 {
+	keypad_col0: keypad-col-0-pins {
 		samsung,pins = "gph2-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	keypad_col1: keypad-col-1 {
+	keypad_col1: keypad-col-1-pins {
 		samsung,pins = "gph2-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	keypad_col2: keypad-col-2 {
+	keypad_col2: keypad-col-2-pins {
 		samsung,pins = "gph2-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	keypad_col3: keypad-col-3 {
+	keypad_col3: keypad-col-3-pins {
 		samsung,pins = "gph2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	keypad_col4: keypad-col-4 {
+	keypad_col4: keypad-col-4-pins {
 		samsung,pins = "gph2-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	keypad_col5: keypad-col-5 {
+	keypad_col5: keypad-col-5-pins {
 		samsung,pins = "gph2-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	keypad_col6: keypad-col-6 {
+	keypad_col6: keypad-col-6-pins {
 		samsung,pins = "gph2-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	keypad_col7: keypad-col-7 {
+	keypad_col7: keypad-col-7-pins {
 		samsung,pins = "gph2-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	sd0_clk: sd0-clk {
+	sd0_clk: sd0-clk-pins {
 		samsung,pins = "gpg0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_cmd: sd0-cmd {
+	sd0_cmd: sd0-cmd-pins {
 		samsung,pins = "gpg0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_cd: sd0-cd {
+	sd0_cd: sd0-cd-pins {
 		samsung,pins = "gpg0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_bus1: sd0-bus-width1 {
+	sd0_bus1: sd0-bus-width1-pins {
 		samsung,pins = "gpg0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_bus4: sd0-bus-width4 {
+	sd0_bus4: sd0-bus-width4-pins {
 		samsung,pins = "gpg0-3", "gpg0-4", "gpg0-5", "gpg0-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_bus8: sd0-bus-width8 {
+	sd0_bus8: sd0-bus-width8-pins {
 		samsung,pins = "gpg1-3", "gpg1-4", "gpg1-5", "gpg1-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_clk: sd1-clk {
+	sd1_clk: sd1-clk-pins {
 		samsung,pins = "gpg1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_cmd: sd1-cmd {
+	sd1_cmd: sd1-cmd-pins {
 		samsung,pins = "gpg1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_cd: sd1-cd {
+	sd1_cd: sd1-cd-pins {
 		samsung,pins = "gpg1-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_bus1: sd1-bus-width1 {
+	sd1_bus1: sd1-bus-width1-pins {
 		samsung,pins = "gpg1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_bus4: sd1-bus-width4 {
+	sd1_bus4: sd1-bus-width4-pins {
 		samsung,pins = "gpg1-3", "gpg1-4", "gpg1-5", "gpg1-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_clk: sd2-clk {
+	sd2_clk: sd2-clk-pins {
 		samsung,pins = "gpg2-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_cmd: sd2-cmd {
+	sd2_cmd: sd2-cmd-pins {
 		samsung,pins = "gpg2-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_cd: sd2-cd {
+	sd2_cd: sd2-cd-pins {
 		samsung,pins = "gpg2-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_bus1: sd2-bus-width1 {
+	sd2_bus1: sd2-bus-width1-pins {
 		samsung,pins = "gpg2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_bus4: sd2-bus-width4 {
+	sd2_bus4: sd2-bus-width4-pins {
 		samsung,pins = "gpg2-3", "gpg2-4", "gpg2-5", "gpg2-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_bus8: sd2-bus-width8 {
+	sd2_bus8: sd2-bus-width8-pins {
 		samsung,pins = "gpg3-3", "gpg3-4", "gpg3-5", "gpg3-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd3_clk: sd3-clk {
+	sd3_clk: sd3-clk-pins {
 		samsung,pins = "gpg3-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd3_cmd: sd3-cmd {
+	sd3_cmd: sd3-cmd-pins {
 		samsung,pins = "gpg3-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd3_cd: sd3-cd {
+	sd3_cd: sd3-cd-pins {
 		samsung,pins = "gpg3-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd3_bus1: sd3-bus-width1 {
+	sd3_bus1: sd3-bus-width1-pins {
 		samsung,pins = "gpg3-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd3_bus4: sd3-bus-width4 {
+	sd3_bus4: sd3-bus-width4-pins {
 		samsung,pins = "gpg3-3", "gpg3-4", "gpg3-5", "gpg3-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	eint0: ext-int0 {
+	eint0: ext-int0-pins {
 		samsung,pins = "gph0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	eint8: ext-int8 {
+	eint8: ext-int8-pins {
 		samsung,pins = "gph1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	eint15: ext-int15 {
+	eint15: ext-int15-pins {
 		samsung,pins = "gph1-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	eint16: ext-int16 {
+	eint16: ext-int16-pins {
 		samsung,pins = "gph2-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	eint31: ext-int31 {
+	eint31: ext-int31-pins {
 		samsung,pins = "gph3-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	cam_port_a_io: cam-port-a-io {
+	cam_port_a_io: cam-port-a-io-pins {
 		samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
 				"gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
 				"gpe1-0", "gpe1-1", "gpe1-2", "gpe1-4";
@@ -777,21 +777,21 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	cam_port_a_clk_active: cam-port-a-clk-active {
+	cam_port_a_clk_active: cam-port-a-clk-active-pins {
 		samsung,pins = "gpe1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	cam_port_a_clk_idle: cam-port-a-clk-idle {
+	cam_port_a_clk_idle: cam-port-a-clk-idle-pins {
 		samsung,pins = "gpe1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	cam_port_b_io: cam-port-b-io {
+	cam_port_b_io: cam-port-b-io-pins {
 		samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
 				"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
 				"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
@@ -800,42 +800,42 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	cam_port_b_clk_active: cam-port-b-clk-active {
+	cam_port_b_clk_active: cam-port-b-clk-active-pins {
 		samsung,pins = "gpj1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	cam_port_b_clk_idle: cam-port-b-clk-idle {
+	cam_port_b_clk_idle: cam-port-b-clk-idle-pins {
 		samsung,pins = "gpj1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-		lcd_ctrl: lcd-ctrl {
+	lcd_ctrl: lcd-ctrl-pins {
 		samsung,pins = "gpd0-0", "gpd0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	lcd_sync: lcd-sync {
+	lcd_sync: lcd-sync-pins {
 		samsung,pins = "gpf0-0", "gpf0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	lcd_clk: lcd-clk {
+	lcd_clk: lcd-clk-pins {
 		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	lcd_data24: lcd-data-width24 {
+	lcd_data24: lcd-data-width24-pins {
 		samsung,pins =  "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7",
 				"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3",
 				"gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7",
diff --git a/arch/arm/boot/dts/sam9x60.dtsi b/arch/arm/boot/dts/sam9x60.dtsi
index ec45ced3cde6..998629a3c34f 100644
--- a/arch/arm/boot/dts/sam9x60.dtsi
+++ b/arch/arm/boot/dts/sam9x60.dtsi
@@ -270,7 +270,7 @@
 				clock-names = "pclk", "gclk";
 			};
 
-			sha: sha@f002c000 {
+			sha: crypto@f002c000 {
 				compatible = "atmel,at91sam9g46-sha";
 				reg = <0xf002c000 0x100>;
 				interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -280,7 +280,6 @@
 				dma-names = "tx";
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
 				clock-names = "sha_clk";
-				status = "okay";
 			};
 
 			trng: trng@f0030000 {
@@ -288,10 +287,9 @@
 				reg = <0xf0030000 0x100>;
 				interrupts = <38 IRQ_TYPE_LEVEL_HIGH 0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
-				status = "okay";
 			};
 
-			aes: aes@f0034000 {
+			aes: crypto@f0034000 {
 				compatible = "atmel,at91sam9g46-aes";
 				reg = <0xf0034000 0x100>;
 				interrupts = <39 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -304,10 +302,9 @@
 				dma-names = "tx", "rx";
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
 				clock-names = "aes_clk";
-				status = "okay";
 			};
 
-			tdes: tdes@f0038000 {
+			tdes: crypto@f0038000 {
 				compatible = "atmel,at91sam9g46-tdes";
 				reg = <0xf0038000 0x100>;
 				interrupts = <40 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -320,7 +317,6 @@
 				dma-names = "tx", "rx";
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 40>;
 				clock-names = "tdes_clk";
-				status = "okay";
 			};
 
 			classd: classd@f003c000 {
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index 09c741e8ecb8..89c71d419f82 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -306,7 +306,7 @@
 				status = "disabled";
 			};
 
-			sha@f0028000 {
+			sha: crypto@f0028000 {
 				compatible = "atmel,at91sam9g46-sha";
 				reg = <0xf0028000 0x100>;
 				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -316,10 +316,9 @@
 				dma-names = "tx";
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
 				clock-names = "sha_clk";
-				status = "okay";
 			};
 
-			aes@f002c000 {
+			aes: crypto@f002c000 {
 				compatible = "atmel,at91sam9g46-aes";
 				reg = <0xf002c000 0x100>;
 				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -332,7 +331,6 @@
 				dma-names = "tx", "rx";
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
 				clock-names = "aes_clk";
-				status = "okay";
 			};
 
 			spi0: spi@f8000000 {
@@ -415,7 +413,7 @@
 				pmecc: ecc-engine@f8014070 {
 					compatible = "atmel,sama5d2-pmecc";
 					reg = <0xf8014070 0x490>,
-					      <0xf8014500 0x100>;
+					      <0xf8014500 0x200>;
 				};
 			};
 
@@ -1084,7 +1082,7 @@
 				#gpio-cells = <2>;
 			};
 
-			tdes@fc044000 {
+			tdes: crypto@fc044000 {
 				compatible = "atmel,at91sam9g46-tdes";
 				reg = <0xfc044000 0x100>;
 				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -1097,7 +1095,6 @@
 				dma-names = "tx", "rx";
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
 				clock-names = "tdes_clk";
-				status = "okay";
 			};
 
 			classd: classd@fc048000 {
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index d1841bffe3c5..8fa423c52592 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -381,7 +381,7 @@
 				status = "disabled";
 			};
 
-			sha@f8034000 {
+			sha: crypto@f8034000 {
 				compatible = "atmel,at91sam9g46-sha";
 				reg = <0xf8034000 0x100>;
 				interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -391,7 +391,7 @@
 				clock-names = "sha_clk";
 			};
 
-			aes@f8038000 {
+			aes: crypto@f8038000 {
 				compatible = "atmel,at91sam9g46-aes";
 				reg = <0xf8038000 0x100>;
 				interrupts = <43 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -402,7 +402,7 @@
 				clock-names = "aes_clk";
 			};
 
-			tdes@f803c000 {
+			tdes: crypto@f803c000 {
 				compatible = "atmel,at91sam9g46-tdes";
 				reg = <0xf803c000 0x100>;
 				interrupts = <44 IRQ_TYPE_LEVEL_HIGH 0>;
diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi
index f6e3e6f57252..7b9242664875 100644
--- a/arch/arm/boot/dts/sama5d4.dtsi
+++ b/arch/arm/boot/dts/sama5d4.dtsi
@@ -673,7 +673,7 @@
 				status = "disabled";
 			};
 
-			aes@fc044000 {
+			aes: crypto@fc044000 {
 				compatible = "atmel,at91sam9g46-aes";
 				reg = <0xfc044000 0x100>;
 				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -684,10 +684,9 @@
 				dma-names = "tx", "rx";
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
 				clock-names = "aes_clk";
-				status = "okay";
 			};
 
-			tdes@fc04c000 {
+			tdes: crpyto@fc04c000 {
 				compatible = "atmel,at91sam9g46-tdes";
 				reg = <0xfc04c000 0x100>;
 				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -698,10 +697,9 @@
 				dma-names = "tx", "rx";
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
 				clock-names = "tdes_clk";
-				status = "okay";
 			};
 
-			sha@fc050000 {
+			sha: crypto@fc050000 {
 				compatible = "atmel,at91sam9g46-sha";
 				reg = <0xfc050000 0x100>;
 				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -710,7 +708,6 @@
 				dma-names = "tx";
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
 				clock-names = "sha_clk";
-				status = "okay";
 			};
 
 			hsmc: smc@fc05c000 {
diff --git a/arch/arm/boot/dts/sama7g5.dtsi b/arch/arm/boot/dts/sama7g5.dtsi
index eddcfbf4d223..4decd3a91a76 100644
--- a/arch/arm/boot/dts/sama7g5.dtsi
+++ b/arch/arm/boot/dts/sama7g5.dtsi
@@ -30,6 +30,44 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0x0>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_CPUPLL>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu_opp_table>;
+		};
+	};
+
+	cpu_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-90000000 {
+			opp-hz = /bits/ 64 <90000000>;
+			opp-microvolt = <1050000 1050000 1225000>;
+			clock-latency-ns = <320000>;
+		};
+
+		opp-250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			opp-microvolt = <1050000 1050000 1225000>;
+			clock-latency-ns = <320000>;
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1050000 1050000 1225000>;
+			clock-latency-ns = <320000>;
+			opp-suspend;
+		};
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1150000 1125000 1225000>;
+			clock-latency-ns = <320000>;
+		};
+
+		opp-1000000002 {
+			opp-hz = /bits/ 64 <1000000002>;
+			opp-microvolt = <1250000 1225000 1300000>;
+			clock-latency-ns = <320000>;
 		};
 	};
 
@@ -75,6 +113,45 @@
 		#size-cells = <1>;
 		ranges;
 
+		nfc_sram: sram@600000 {
+			compatible = "mmio-sram";
+			no-memory-wc;
+			reg = <0x00600000 0x2400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x00600000 0x2400>;
+		};
+
+		nfc_io: nfc-io@10000000 {
+			compatible = "atmel,sama5d3-nfc-io", "syscon";
+			reg = <0x10000000 0x8000000>;
+		};
+
+		ebi: ebi@40000000 {
+			compatible = "atmel,sama5d3-ebi";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&hsmc>;
+			reg = <0x40000000 0x20000000>;
+			ranges = <0x0 0x0 0x40000000 0x8000000
+				  0x1 0x0 0x48000000 0x8000000
+				  0x2 0x0 0x50000000 0x8000000
+				  0x3 0x0 0x58000000 0x8000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK1>;
+			status = "disabled";
+
+			nand_controller: nand-controller {
+				compatible = "atmel,sama5d3-nand-controller";
+				atmel,nfc-sram = <&nfc_sram>;
+				atmel,nfc-io = <&nfc_io>;
+				ecc-engine = <&pmecc>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+
 		securam: securam@e0000000 {
 			compatible = "microchip,sama7g5-securam", "atmel,sama5d2-securam", "mmio-sram";
 			reg = <0xe0000000 0x4000>;
@@ -83,7 +160,6 @@
 			#size-cells = <1>;
 			ranges = <0 0xe0000000 0x4000>;
 			no-memory-wc;
-			status = "okay";
 		};
 
 		secumod: secumod@e0004000 {
@@ -181,6 +257,22 @@
 			clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
 		};
 
+		hsmc: hsmc@e0808000 {
+			compatible = "atmel,sama5d2-smc", "syscon", "simple-mfd";
+			reg = <0xe0808000 0x1000>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			pmecc: ecc-engine@e0808070 {
+				compatible = "atmel,sama5d2-pmecc";
+				reg = <0xe0808070 0x490>,
+				      <0xe0808500 0x200>;
+			};
+		};
+
 		qspi0: spi@e080c000 {
 			compatible = "microchip,sama7g5-ospi";
 			reg = <0xe080c000 0x400>, <0x20000000 0x10000000>;
@@ -211,6 +303,102 @@
 			status = "disabled";
 		};
 
+		can0: can@e0828000 {
+			compatible = "bosch,m_can";
+			reg = <0xe0828000 0x100>, <0x100000 0x7800>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 61>, <&pmc PMC_TYPE_GCK 61>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 61>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0x3400 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can1: can@e082c000 {
+			compatible = "bosch,m_can";
+			reg = <0xe082c000 0x100>, <0x100000 0xbc00>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 62>, <&pmc PMC_TYPE_GCK 62>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 62>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0x7800 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can2: can@e0830000 {
+			compatible = "bosch,m_can";
+			reg = <0xe0830000 0x100>, <0x100000 0x10000>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 63>, <&pmc PMC_TYPE_GCK 63>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 63>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0xbc00 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can3: can@e0834000 {
+			compatible = "bosch,m_can";
+			reg = <0xe0834000 0x100>, <0x110000 0x4400>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 64>, <&pmc PMC_TYPE_GCK 64>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 64>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0x0 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can4: can@e0838000 {
+			compatible = "bosch,m_can";
+			reg = <0xe0838000 0x100>, <0x110000 0x8800>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 65>, <&pmc PMC_TYPE_GCK 65>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 65>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0x4400 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
+		can5: can@e083c000 {
+			compatible = "bosch,m_can";
+			reg = <0xe083c000 0x100>, <0x110000 0xcc00>;
+			reg-names = "m_can", "message_ram";
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "int0", "int1";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 66>, <&pmc PMC_TYPE_GCK 66>;
+			clock-names = "hclk", "cclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 66>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
+			assigned-clock-rates = <40000000>;
+			bosch,mram-cfg = <0x8800 0 0 64 0 0 32 32>;
+			status = "disabled";
+		};
+
 		adc: adc@e1000000 {
 			compatible = "microchip,sama7g5-adc";
 			reg = <0xe1000000 0x200>;
@@ -322,6 +510,19 @@
 			status = "disabled";
 		};
 
+		eic: interrupt-controller@e1628000 {
+			compatible = "microchip,sama7g5-eic";
+			reg = <0xe1628000 0xec>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 37>;
+			clock-names = "pclk";
+			status = "disabled";
+		};
+
 		pit64b0: timer@e1800000 {
 			compatible = "microchip,sama7g5-pit64b", "microchip,sam9x60-pit64b";
 			reg = <0xe1800000 0x4000>;
@@ -338,6 +539,27 @@
 			clock-names = "pclk", "gclk";
 		};
 
+		aes: crypto@e1810000 {
+			compatible = "atmel,at91sam9g46-aes";
+			reg = <0xe1810000 0x100>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 27>;
+			clock-names = "aes_clk";
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(1)>,
+			       <&dma0 AT91_XDMAC_DT_PERID(2)>;
+			dma-names = "tx", "rx";
+		};
+
+		sha: crypto@e1814000 {
+			compatible = "atmel,at91sam9g46-sha";
+			reg = <0xe1814000 0x100>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 83>;
+			clock-names = "sha_clk";
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(48)>;
+			dma-names = "tx";
+		};
+
 		flx0: flexcom@e1818000 {
 			compatible = "atmel,sama5d2-flexcom";
 			reg = <0xe1818000 0x200>;
@@ -382,8 +604,6 @@
 				dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>,
 					<&dma0 AT91_XDMAC_DT_PERID(8)>;
 				dma-names = "rx", "tx";
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
 				status = "disabled";
 			};
 		};
@@ -420,6 +640,17 @@
 			status = "disabled";
 		};
 
+		tdes: crypto@e2014000 {
+			compatible = "atmel,at91sam9g46-tdes";
+			reg = <0xe2014000 0x100>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 96>;
+			clock-names = "tdes_clk";
+			dmas = <&dma0 AT91_XDMAC_DT_PERID(54)>,
+			       <&dma0 AT91_XDMAC_DT_PERID(53)>;
+			dma-names = "tx", "rx";
+		};
+
 		flx4: flexcom@e2018000 {
 			compatible = "atmel,sama5d2-flexcom";
 			reg = <0xe2018000 0x200>;
@@ -558,8 +789,6 @@
 				dmas = <&dma0 AT91_XDMAC_DT_PERID(21)>,
 					<&dma0 AT91_XDMAC_DT_PERID(22)>;
 				dma-names = "rx", "tx";
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
 				status = "disabled";
 			};
 		};
@@ -584,8 +813,6 @@
 				dmas = <&dma0 AT91_XDMAC_DT_PERID(23)>,
 					<&dma0 AT91_XDMAC_DT_PERID(24)>;
 				dma-names = "rx", "tx";
-				atmel,use-dma-rx;
-				atmel,use-dma-tx;
 				status = "disabled";
 			};
 		};
@@ -618,13 +845,11 @@
 		uddrc: uddrc@e3800000 {
 			compatible = "microchip,sama7g5-uddrc";
 			reg = <0xe3800000 0x4000>;
-			status = "okay";
 		};
 
 		ddr3phy: ddr3phy@e3804000 {
 			compatible = "microchip,sama7g5-ddr3phy";
 			reg = <0xe3804000 0x1000>;
-			status = "okay";
 		};
 
 		gic: interrupt-controller@e8c11000 {
diff --git a/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dts b/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dts
index 2a3364b26361..a75c059b6727 100644
--- a/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dts
+++ b/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dts
@@ -6,7 +6,7 @@
 / {
 
 	model = "Enclustra Mercury AA1";
-	compatible = "altr,socfpga-arria10", "altr,socfpga";
+	compatible = "enclustra,mercury-aa1", "altr,socfpga-arria10", "altr,socfpga";
 
 	aliases {
 		ethernet0 = &gmac0;
diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
index 7edebe20e859..ec7365444a3b 100644
--- a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
@@ -6,7 +6,7 @@
 
 / {
 	model = "Altera SOCFPGA Arria 10";
-	compatible = "altr,socfpga-arria10", "altr,socfpga";
+	compatible = "altr,socfpga-arria10-socdk", "altr,socfpga-arria10", "altr,socfpga";
 
 	aliases {
 		ethernet0 = &gmac0;
diff --git a/arch/arm/boot/dts/socfpga_arria5_socdk.dts b/arch/arm/boot/dts/socfpga_arria5_socdk.dts
index 1b02d46496a8..7f5458d8fccc 100644
--- a/arch/arm/boot/dts/socfpga_arria5_socdk.dts
+++ b/arch/arm/boot/dts/socfpga_arria5_socdk.dts
@@ -7,7 +7,7 @@
 
 / {
 	model = "Altera SOCFPGA Arria V SoC Development Kit";
-	compatible = "altr,socfpga-arria5", "altr,socfpga";
+	compatible = "altr,socfpga-arria5-socdk", "altr,socfpga-arria5", "altr,socfpga";
 
 	chosen {
 		bootargs = "earlyprintk";
@@ -50,7 +50,7 @@
 		};
 	};
 
-	regulator_3_3v: 3-3-v-regulator {
+	regulator_3_3v: regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "3.3V";
 		regulator-min-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_chameleon96.dts b/arch/arm/boot/dts/socfpga_cyclone5_chameleon96.dts
index f6561766d83f..76262f1e5e03 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_chameleon96.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_chameleon96.dts
@@ -24,7 +24,7 @@
 		reg = <0x0 0x20000000>; /* 512MB */
 	};
 
-	regulator_3_3v: 3-3-v-regulator {
+	regulator_3_3v: regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "3.3V";
 		regulator-min-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_de0_nano_soc.dts b/arch/arm/boot/dts/socfpga_cyclone5_de0_nano_soc.dts
index 67076e1b1c7f..c8f051fb2bf6 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_de0_nano_soc.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_de0_nano_soc.dts
@@ -24,7 +24,7 @@
 		ethernet0 = &gmac1;
 	};
 
-	regulator_3_3v: 3-3-v-regulator {
+	regulator_3_3v: regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "3.3V";
 		regulator-min-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
index 51bb436784e2..253ef139181d 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_socdk.dts
@@ -50,7 +50,7 @@
 		};
 	};
 
-	regulator_3_3v: 3-3-v-regulator {
+	regulator_3_3v: regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "3.3V";
 		regulator-min-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
index cae9ddd5ed38..3dd99c7c95e0 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
@@ -111,7 +111,7 @@
 		};
 	};
 
-	regulator_3_3v: vcc3p3-regulator {
+	regulator_3_3v: regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC3P3";
 		regulator-min-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts b/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts
index 3f7aa7bf0863..b0003f350e65 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_sodia.dts
@@ -26,7 +26,7 @@
 		ethernet0 = &gmac1;
 	};
 
-	regulator_3_3v: 3-3-v-regulator {
+	regulator_3_3v: regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "3.3V";
 		regulator-min-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/spear320-hmi.dts b/arch/arm/boot/dts/spear320-hmi.dts
index 367ba48aac3e..b587e4ec11e5 100644
--- a/arch/arm/boot/dts/spear320-hmi.dts
+++ b/arch/arm/boot/dts/spear320-hmi.dts
@@ -235,7 +235,6 @@
 					#address-cells = <1>;
 					#size-cells = <0>;
 					reg = <0x41>;
-					irq-over-gpio;
 					irq-gpios = <&gpiopinctrl 29 0x4>;
 					id = <0>;
 					blocks = <0x5>;
diff --git a/arch/arm/boot/dts/ste-ab8500.dtsi b/arch/arm/boot/dts/ste-ab8500.dtsi
index 2cf19386a525..35137c6e52ee 100644
--- a/arch/arm/boot/dts/ste-ab8500.dtsi
+++ b/arch/arm/boot/dts/ste-ab8500.dtsi
@@ -28,26 +28,28 @@
 				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 
 				ab8500_clock: clock-controller {
 					compatible = "stericsson,ab8500-clk";
 					#clock-cells = <1>;
 				};
 
-				ab8500_gpio: ab8500-gpiocontroller {
+				ab8500_gpio: gpio {
 					compatible = "stericsson,ab8500-gpio";
 					gpio-controller;
 					#gpio-cells = <2>;
 				};
 
-				ab8500-rtc {
+				rtc {
 					compatible = "stericsson,ab8500-rtc";
 					interrupts = <17 IRQ_TYPE_LEVEL_HIGH>,
 						     <18 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "60S", "ALARM";
 				};
 
-				gpadc: ab8500-gpadc {
+				gpadc: adc {
 					compatible = "stericsson,ab8500-gpadc";
 					interrupts = <32 IRQ_TYPE_LEVEL_HIGH>,
 						     <39 IRQ_TYPE_LEVEL_HIGH>;
@@ -120,13 +122,10 @@
 					};
 				};
 
-				ab8500_temp {
+				thermal {
 					compatible = "stericsson,abx500-temp";
 					interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "ABX500_TEMP_WARM";
-					io-channels = <&gpadc 0x06>,
-						      <&gpadc 0x07>;
-					io-channel-names = "aux1", "aux2";
 				};
 
 				ab8500_fg {
@@ -212,7 +211,7 @@
 					monitored-battery	= <&battery>;
 				};
 
-				ab8500_usb: ab8500_usb {
+				ab8500_usb: phy {
 					compatible = "stericsson,ab8500-usb";
 					interrupts = <90 IRQ_TYPE_LEVEL_HIGH>,
 						     <96 IRQ_TYPE_LEVEL_HIGH>,
@@ -236,7 +235,7 @@
 					#phy-cells = <0>;
 				};
 
-				ab8500-ponkey {
+				key {
 					compatible = "stericsson,ab8500-poweron-key";
 					interrupts = <6 IRQ_TYPE_LEVEL_HIGH>,
 						     <7 IRQ_TYPE_LEVEL_HIGH>;
@@ -247,29 +246,31 @@
 					compatible = "stericsson,ab8500-sysctrl";
 				};
 
-				ab8500-pwm-1 {
+				pwm@1 {
 					compatible = "stericsson,ab8500-pwm";
+					reg = <1>;
 					clocks = <&ab8500_clock AB8500_SYSCLK_INT>;
 					clock-names = "intclk";
+					#pwm-cells = <1>;
 				};
 
-				ab8500-pwm-2 {
+				pwm@2 {
 					compatible = "stericsson,ab8500-pwm";
+					reg = <2>;
 					clocks = <&ab8500_clock AB8500_SYSCLK_INT>;
 					clock-names = "intclk";
+					#pwm-cells = <1>;
 				};
 
-				ab8500-pwm-3 {
+				pwm@3 {
 					compatible = "stericsson,ab8500-pwm";
+					reg = <3>;
 					clocks = <&ab8500_clock AB8500_SYSCLK_INT>;
 					clock-names = "intclk";
+					#pwm-cells = <1>;
 				};
 
-				ab8500-debugfs {
-					compatible = "stericsson,ab8500-debug";
-				};
-
-				codec: ab8500-codec {
+				codec: codec {
 					compatible = "stericsson,ab8500-codec";
 
 					V-AUD-supply = <&ab8500_ldo_audio_reg>;
@@ -283,7 +284,7 @@
 					stericsson,earpeice-cmv = <950>; /* Units in mV. */
 				};
 
-				ext_regulators: ab8500-ext-regulators {
+				ext_regulators: regulator-external {
 					compatible = "stericsson,ab8500-ext-regulator";
 
 					ab8500_ext1_reg: ab8500_ext1 {
@@ -307,7 +308,7 @@
 					};
 				};
 
-				ab8500-regulators {
+				regulator {
 					compatible = "stericsson,ab8500-regulator";
 					vin-supply = <&ab8500_ext3_reg>;
 
diff --git a/arch/arm/boot/dts/ste-ab8505.dtsi b/arch/arm/boot/dts/ste-ab8505.dtsi
index e98335e9d1cb..131c82508e82 100644
--- a/arch/arm/boot/dts/ste-ab8505.dtsi
+++ b/arch/arm/boot/dts/ste-ab8505.dtsi
@@ -25,26 +25,28 @@
 				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				#address-cells = <1>;
+				#size-cells = <0>;
 
 				ab8500_clock: clock-controller {
 					compatible = "stericsson,ab8500-clk";
 					#clock-cells = <1>;
 				};
 
-				ab8505_gpio: ab8505-gpiocontroller {
+				ab8505_gpio: gpio {
 					compatible = "stericsson,ab8505-gpio";
 					gpio-controller;
 					#gpio-cells = <2>;
 				};
 
-				ab8500-rtc {
+				rtc {
 					compatible = "stericsson,ab8500-rtc";
 					interrupts = <17 IRQ_TYPE_LEVEL_HIGH>,
 						     <18 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "60S", "ALARM";
 				};
 
-				gpadc: ab8500-gpadc {
+				gpadc: adc {
 					compatible = "stericsson,ab8500-gpadc";
 					interrupts = <39 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "SW_CONV_END";
@@ -92,8 +94,13 @@
 					};
 				};
 
+				thermal {
+					compatible = "stericsson,abx500-temp";
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "ABX500_TEMP_WARM";
+				};
+
 				ab8500_fg {
-					status = "disabled";
 					compatible = "stericsson,ab8500-fg";
 					interrupts = <24 IRQ_TYPE_LEVEL_HIGH>,
 						     <8 IRQ_TYPE_LEVEL_HIGH>,
@@ -111,7 +118,6 @@
 				};
 
 				ab8500_btemp {
-					status = "disabled";
 					compatible = "stericsson,ab8500-btemp";
 					interrupts = <20 IRQ_TYPE_LEVEL_HIGH>,
 						     <80 IRQ_TYPE_LEVEL_HIGH>,
@@ -131,7 +137,6 @@
 				};
 
 				ab8500_charger {
-					status = "disabled";
 					compatible = "stericsson,ab8500-charger";
 					interrupts = <10 IRQ_TYPE_LEVEL_HIGH>,
 						     <11 IRQ_TYPE_LEVEL_HIGH>,
@@ -170,12 +175,11 @@
 				};
 
 				ab8500_chargalg {
-					status = "disabled";
 					compatible = "stericsson,ab8500-chargalg";
 					monitored-battery = <&battery>;
 				};
 
-				ab8500_usb: ab8500_usb {
+				ab8500_usb: phy {
 					compatible = "stericsson,ab8500-usb";
 					interrupts = <90 IRQ_TYPE_LEVEL_HIGH>,
 						     <96 IRQ_TYPE_LEVEL_HIGH>,
@@ -199,7 +203,7 @@
 					#phy-cells = <0>;
 				};
 
-				ab8500-ponkey {
+				key {
 					compatible = "stericsson,ab8500-poweron-key";
 					interrupts = <6 IRQ_TYPE_LEVEL_HIGH>,
 						     <7 IRQ_TYPE_LEVEL_HIGH>;
@@ -210,17 +214,15 @@
 					compatible = "stericsson,ab8500-sysctrl";
 				};
 
-				ab8500-pwm {
+				pwm@1 {
 					compatible = "stericsson,ab8500-pwm";
+					reg = <1>;
 					clocks = <&ab8500_clock AB8500_SYSCLK_INT>;
 					clock-names = "intclk";
+					#pwm-cells = <1>;
 				};
 
-				ab8500-debugfs {
-					compatible = "stericsson,ab8500-debug";
-				};
-
-				codec: ab8500-codec {
+				codec: codec {
 					compatible = "stericsson,ab8500-codec";
 
 					V-AUD-supply = <&ab8500_ldo_audio_reg>;
@@ -233,7 +235,7 @@
 					stericsson,earpeice-cmv = <950>; /* Units in mV. */
 				};
 
-				ab8505-regulators {
+				regulator {
 					compatible = "stericsson,ab8505-regulator";
 
 					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
diff --git a/arch/arm/boot/dts/ste-href-ab8500.dtsi b/arch/arm/boot/dts/ste-href-ab8500.dtsi
index 3ccb7b5c7162..9fa024900d53 100644
--- a/arch/arm/boot/dts/ste-href-ab8500.dtsi
+++ b/arch/arm/boot/dts/ste-href-ab8500.dtsi
@@ -9,7 +9,7 @@
 	soc {
 		prcmu@80157000 {
 			ab8500 {
-				ab8500-gpiocontroller {
+				gpio {
 					/* Hog a few default settings */
 					pinctrl-names = "default";
 					pinctrl-0 = <&gpio2_default_mode>,
diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi
index 718752a0248e..fbaa0ce46427 100644
--- a/arch/arm/boot/dts/ste-href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@@ -16,7 +16,24 @@
 	battery: battery {
 		compatible = "simple-battery";
 		battery-type = "lithium-ion-polymer";
-		thermistor-on-batctrl;
+	};
+
+	thermal-zones {
+		battery-thermal {
+			/* This zone will be polled by the battery temperature code */
+			polling-delay = <0>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&bat_therm>;
+		};
+	};
+
+	bat_therm: thermistor {
+		compatible = "murata,ncp18wb473";
+		io-channels = <&gpadc 0x02>; /* BatTemp */
+		pullup-uv = <1800000>;
+		pullup-ohm = <230000>;
+		pulldown-ohm = <0>;
+		#thermal-sensor-cells = <0>;
 	};
 
 	soc {
@@ -219,16 +236,16 @@
 
 		prcmu@80157000 {
 			ab8500 {
-				ab8500-gpiocontroller {
+				gpio {
 				};
 
-				ab8500_usb {
+				phy {
 					pinctrl-names = "default", "sleep";
 					pinctrl-0 = <&usb_a_1_default>;
 					pinctrl-1 = <&usb_a_1_sleep>;
 				};
 
-				ab8500-regulators {
+				regulator {
 					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
 						regulator-name = "V-DISPLAY";
 					};
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index fb719c8a8eb2..1c9094f24893 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -20,7 +20,24 @@
 	battery: battery {
 		compatible = "simple-battery";
 		battery-type = "lithium-ion-polymer";
-		thermistor-on-batctrl;
+	};
+
+	thermal-zones {
+		battery-thermal {
+			/* This zone will be polled by the battery temperature code */
+			polling-delay = <0>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&bat_therm>;
+		};
+	};
+
+	bat_therm: thermistor {
+		compatible = "murata,ncp18wb473";
+		io-channels = <&gpadc 0x02>; /* BatTemp */
+		pullup-uv = <1800000>;
+		pullup-ohm = <230000>;
+		pulldown-ohm = <0>;
+		#thermal-sensor-cells = <0>;
 	};
 
 	en_3v3_reg: en_3v3 {
@@ -384,7 +401,7 @@
 
 		prcmu@80157000 {
 			ab8500 {
-				ab8500-gpiocontroller {
+				gpio {
 					/*
 					 * AB8500 GPIOs are numbered starting from 1, so the first
 					 * index 0 is what in the datasheet is called "GPIO1", and
@@ -406,13 +423,13 @@
 						     "PM_GPIO42"; /* AB8500 GPIO42 */
 				};
 
-				ab8500_usb {
+				phy {
 					pinctrl-names = "default", "sleep";
 					pinctrl-0 = <&usb_a_1_default>;
 					pinctrl-1 = <&usb_a_1_sleep>;
 				};
 
-				ext_regulators: ab8500-ext-regulators {
+				ext_regulators: regulator-external {
 					ab8500_ext1_reg: ab8500_ext1 {
 						regulator-name = "ab8500-ext-supply1";
 					};
@@ -426,7 +443,7 @@
 					};
 				};
 
-				ab8500-regulators {
+				regulator {
 					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
 						regulator-name = "V-DISPLAY";
 					};
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-codina.dts b/arch/arm/boot/dts/ste-ux500-samsung-codina.dts
index fbd60065542d..1c1725d31c7c 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-codina.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-codina.dts
@@ -47,6 +47,24 @@
 		compatible = "samsung,eb425161lu";
 	};
 
+	thermal-zones {
+		battery-thermal {
+			/* This zone will be polled by the battery temperature code */
+			polling-delay = <0>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&bat_therm>;
+		};
+	};
+
+	bat_therm: thermistor {
+		compatible = "samsung,1404-001221";
+		io-channels = <&gpadc 0x02>; /* BatTemp */
+		pullup-uv = <1800000>;
+		pullup-ohm = <230000>;
+		pulldown-ohm = <0>;
+		#thermal-sensor-cells = <0>;
+	};
+
 	/* TI TXS0206 level translator for 2.9 V */
 	sd_level_translator: regulator-gpio {
 		compatible = "regulator-fixed";
@@ -459,13 +477,13 @@
 
 		prcmu@80157000 {
 			ab8500 {
-				ab8500_usb {
+				phy {
 					pinctrl-names = "default", "sleep";
 					pinctrl-0 = <&usb_a_1_default>;
 					pinctrl-1 = <&usb_a_1_sleep>;
 				};
 
-				ab8500-regulators {
+				regulator {
 					ab8500_ldo_aux1 {
 						/* Used for VDD for sensors */
 						regulator-name = "V-SENSORS-VDD";
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts b/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts
index 1c0e5cfeddac..fd170974765f 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts
@@ -24,6 +24,24 @@
 		compatible = "samsung,eb585157lu";
 	};
 
+	thermal-zones {
+		battery-thermal {
+			/* This zone will be polled by the battery temperature code */
+			polling-delay = <0>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&bat_therm>;
+		};
+	};
+
+	bat_therm: thermistor {
+		compatible = "samsung,1404-001221";
+		io-channels = <&gpadc 0x02>; /* BatTemp */
+		pullup-uv = <1800000>;
+		pullup-ohm = <230000>;
+		pulldown-ohm = <0>;
+		#thermal-sensor-cells = <0>;
+	};
+
 	/* TI TXS0206 level translator for 2.9 V */
 	sd_level_translator: regulator-gpio {
 		compatible = "regulator-fixed";
@@ -432,13 +450,13 @@
 
 		prcmu@80157000 {
 			ab8500 {
-				ab8500_usb {
+				phy {
 					pinctrl-names = "default", "sleep";
 					pinctrl-0 = <&usb_a_1_default>;
 					pinctrl-1 = <&usb_a_1_sleep>;
 				};
 
-				ab8500-regulators {
+				regulator {
 					ab8500_ldo_aux1 {
 						/* Used for VDD for sensors */
 						regulator-name = "V-SENSORS-VDD";
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
index fc4c5166d85b..290ab59e863d 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
@@ -29,6 +29,24 @@
 		compatible = "samsung,eb-l1m7flu";
 	};
 
+	thermal-zones {
+		battery-thermal {
+			/* This zone will be polled by the battery temperature code */
+			polling-delay = <0>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&bat_therm>;
+		};
+	};
+
+	bat_therm: thermistor {
+		compatible = "samsung,1404-001221";
+		io-channels = <&gpadc 0x02>; /* BatTemp */
+		pullup-uv = <1800000>;
+		pullup-ohm = <230000>;
+		pulldown-ohm = <0>;
+		#thermal-sensor-cells = <0>;
+	};
+
 	i2c-gpio-0 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpio2 14 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
@@ -280,13 +298,13 @@
 
 		prcmu@80157000 {
 			ab8505 {
-				ab8500_usb {
+				phy {
 					pinctrl-names = "default", "sleep";
 					pinctrl-0 = <&usb_a_1_default>;
 					pinctrl-1 = <&usb_a_1_sleep>;
 				};
 
-				ab8505-regulators {
+				regulator {
 					ab8500_ldo_aux1 {
 						regulator-name = "sensor_3v";
 						regulator-min-microvolt = <3000000>;
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
index 5ddcbc1a855d..42762bfcd878 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
@@ -24,6 +24,24 @@
 		compatible = "samsung,eb535151vu";
 	};
 
+	thermal-zones {
+		battery-thermal {
+			/* This zone will be polled by the battery temperature code */
+			polling-delay = <0>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&bat_therm>;
+		};
+	};
+
+	bat_therm: thermistor {
+		compatible = "samsung,1404-001221";
+		io-channels = <&gpadc 0x02>; /* BatTemp */
+		pullup-uv = <1800000>;
+		pullup-ohm = <230000>;
+		pulldown-ohm = <0>;
+		#thermal-sensor-cells = <0>;
+	};
+
 	/* External LDO for eMMC LDO VMEM_3V3 controlled by GPIO6 */
 	ldo_3v3_reg: regulator-gpio-ldo-3v3 {
 		compatible = "regulator-fixed";
@@ -480,13 +498,13 @@
 
 		prcmu@80157000 {
 			ab8500 {
-				ab8500_usb {
+				phy {
 					pinctrl-names = "default", "sleep";
 					pinctrl-0 = <&usb_a_1_default>;
 					pinctrl-1 = <&usb_a_1_sleep>;
 				};
 
-				ab8500-regulators {
+				regulator {
 					ab8500_ldo_aux1 {
 						/* Used for VDD for sensors */
 						regulator-name = "V-SENSORS-VDD";
@@ -594,7 +612,7 @@
 						reg = <0x08>;
 						mount-matrix = "0", "1", "0",
 							       "-1", "0", "0",
-							       "0", "0", "-1";
+							       "0", "0", "1";
 						vddio-supply = <&ab8500_ldo_aux2_reg>; // 1.8V
 						vdd-supply = <&ab8500_ldo_aux1_reg>; // 3V
 					};
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts b/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts
index 9ec3f85b1a18..2a5bf54137ce 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts
@@ -28,6 +28,24 @@
 		compatible = "samsung,eb425161la";
 	};
 
+	thermal-zones {
+		battery-thermal {
+			/* This zone will be polled by the battery temperature code */
+			polling-delay = <0>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&bat_therm>;
+		};
+	};
+
+	bat_therm: thermistor {
+		compatible = "samsung,1404-001221";
+		io-channels = <&gpadc 0x02>; /* BatTemp */
+		pullup-uv = <1800000>;
+		pullup-ohm = <230000>;
+		pulldown-ohm = <0>;
+		#thermal-sensor-cells = <0>;
+	};
+
 	/* TI TXS0206 level translator for 2.9 V */
 	sd_level_translator: regulator-gpio {
 		compatible = "regulator-fixed";
@@ -301,13 +319,13 @@
 
 		prcmu@80157000 {
 			ab8505 {
-				ab8500_usb {
+				phy {
 					pinctrl-names = "default", "sleep";
 					pinctrl-0 = <&usb_a_1_default>;
 					pinctrl-1 = <&usb_a_1_sleep>;
 				};
 
-				ab8505-regulators {
+				regulator {
 					ab8500_ldo_aux1 {
 						/* Used for VDD for sensors */
 						regulator-name = "AUX1";
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
index 580ca497f312..dcb03ce7cbd4 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
@@ -24,6 +24,24 @@
 		compatible = "samsung,eb485159lu";
 	};
 
+	thermal-zones {
+		battery-thermal {
+			/* This zone will be polled by the battery temperature code */
+			polling-delay = <0>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&bat_therm>;
+		};
+	};
+
+	bat_therm: thermistor {
+		compatible = "samsung,1404-001221";
+		io-channels = <&gpadc 0x02>; /* BatTemp */
+		pullup-uv = <1800000>;
+		pullup-ohm = <230000>;
+		pulldown-ohm = <0>;
+		#thermal-sensor-cells = <0>;
+	};
+
 	/* TI TXS0206 level translator for 2.9 V */
 	sd_level_translator: regulator-gpio {
 		compatible = "regulator-fixed";
@@ -185,10 +203,6 @@
 			cap-sd-highspeed;
 			cap-mmc-highspeed;
 			/* All direction control is used */
-			st,sig-dir-cmd;
-			st,sig-dir-dat0;
-			st,sig-dir-dat2;
-			st,sig-dir-dat31;
 			st,sig-pin-fbclk;
 			full-pwr-cycle;
 			vmmc-supply = <&ab8500_ldo_aux3_reg>;
@@ -285,13 +299,13 @@
 
 		prcmu@80157000 {
 			ab8505 {
-				ab8500_usb {
+				phy {
 					pinctrl-names = "default", "sleep";
 					pinctrl-0 = <&usb_a_1_default>;
 					pinctrl-1 = <&usb_a_1_sleep>;
 				};
 
-				ab8505-regulators {
+				regulator {
 					ab8500_ldo_aux1 {
 						/* Used for VDD for sensors */
 						regulator-name = "AUX1";
diff --git a/arch/arm/boot/dts/stih407-clock.dtsi b/arch/arm/boot/dts/stih407-clock.dtsi
index 9cce9541e26b..350bcfcf498b 100644
--- a/arch/arm/boot/dts/stih407-clock.dtsi
+++ b/arch/arm/boot/dts/stih407-clock.dtsi
@@ -29,7 +29,7 @@
 		 */
 		clockgen-a9@92b0000 {
 			compatible = "st,clkgen-c32";
-			reg = <0x92b0000 0xffff>;
+			reg = <0x92b0000 0x10000>;
 
 			clockgen_a9_pll: clockgen-a9-pll {
 				#clock-cells = <1>;
@@ -37,32 +37,27 @@
 
 				clocks = <&clk_sysin>;
 			};
-		};
 
-		/*
-		 * ARM CPU related clocks.
-		 */
-		clk_m_a9: clk-m-a9@92b0000 {
-			#clock-cells = <0>;
-			compatible = "st,stih407-clkgen-a9-mux";
-			reg = <0x92b0000 0x10000>;
-
-			clocks = <&clockgen_a9_pll 0>,
-				 <&clockgen_a9_pll 0>,
-				 <&clk_s_c0_flexgen 13>,
-				 <&clk_m_a9_ext2f_div2>;
+			clk_m_a9: clk-m-a9 {
+				#clock-cells = <0>;
+				compatible = "st,stih407-clkgen-a9-mux";
 
+				clocks = <&clockgen_a9_pll 0>,
+					 <&clockgen_a9_pll 0>,
+					 <&clk_s_c0_flexgen 13>,
+					 <&clk_m_a9_ext2f_div2>;
 
-			/*
-			 * ARM Peripheral clock for timers
-			 */
-			arm_periph_clk: clk-m-a9-periphs {
-				#clock-cells = <0>;
-				compatible = "fixed-factor-clock";
+				/*
+				 * ARM Peripheral clock for timers
+				 */
+				arm_periph_clk: clk-m-a9-periphs {
+					#clock-cells = <0>;
+					compatible = "fixed-factor-clock";
 
-				clocks = <&clk_m_a9>;
-				clock-div = <2>;
-				clock-mult = <1>;
+					clocks = <&clk_m_a9>;
+					clock-div = <2>;
+					clock-mult = <1>;
+				};
 			};
 		};
 
@@ -87,14 +82,6 @@
 			};
 		};
 
-		clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 {
-			#clock-cells = <1>;
-			compatible = "st,quadfs-pll";
-			reg = <0x9103000 0x1000>;
-
-			clocks = <&clk_sysin>;
-		};
-
 		clk_s_c0: clockgen-c@9103000 {
 			compatible = "st,clkgen-c32";
 			reg = <0x9103000 0x1000>;
@@ -113,6 +100,13 @@
 				clocks = <&clk_sysin>;
 			};
 
+			clk_s_c0_quadfs: clk-s-c0-quadfs {
+				#clock-cells = <1>;
+				compatible = "st,quadfs-pll";
+
+				clocks = <&clk_sysin>;
+			};
+
 			clk_s_c0_flexgen: clk-s-c0-flexgen {
 				#clock-cells = <1>;
 				compatible = "st,flexgen", "st,flexgen-stih407-c0";
@@ -142,18 +136,17 @@
 			};
 		};
 
-		clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 {
-			#clock-cells = <1>;
-			compatible = "st,quadfs-d0";
-			reg = <0x9104000 0x1000>;
-
-			clocks = <&clk_sysin>;
-		};
-
 		clockgen-d0@9104000 {
 			compatible = "st,clkgen-c32";
 			reg = <0x9104000 0x1000>;
 
+			clk_s_d0_quadfs: clk-s-d0-quadfs {
+				#clock-cells = <1>;
+				compatible = "st,quadfs-d0";
+
+				clocks = <&clk_sysin>;
+			};
+
 			clk_s_d0_flexgen: clk-s-d0-flexgen {
 				#clock-cells = <1>;
 				compatible = "st,flexgen", "st,flexgen-stih407-d0";
@@ -166,18 +159,17 @@
 			};
 		};
 
-		clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 {
-			#clock-cells = <1>;
-			compatible = "st,quadfs-d2";
-			reg = <0x9106000 0x1000>;
-
-			clocks = <&clk_sysin>;
-		};
-
 		clockgen-d2@9106000 {
 			compatible = "st,clkgen-c32";
 			reg = <0x9106000 0x1000>;
 
+			clk_s_d2_quadfs: clk-s-d2-quadfs {
+				#clock-cells = <1>;
+				compatible = "st,quadfs-d2";
+
+				clocks = <&clk_sysin>;
+			};
+
 			clk_s_d2_flexgen: clk-s-d2-flexgen {
 				#clock-cells = <1>;
 				compatible = "st,flexgen", "st,flexgen-stih407-d2";
@@ -192,18 +184,17 @@
 			};
 		};
 
-		clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
-			#clock-cells = <1>;
-			compatible = "st,quadfs-d3";
-			reg = <0x9107000 0x1000>;
-
-			clocks = <&clk_sysin>;
-		};
-
 		clockgen-d3@9107000 {
 			compatible = "st,clkgen-c32";
 			reg = <0x9107000 0x1000>;
 
+			clk_s_d3_quadfs: clk-s-d3-quadfs {
+				#clock-cells = <1>;
+				compatible = "st,quadfs-d3";
+
+				clocks = <&clk_sysin>;
+			};
+
 			clk_s_d3_flexgen: clk-s-d3-flexgen {
 				#clock-cells = <1>;
 				compatible = "st,flexgen", "st,flexgen-stih407-d3";
diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
index 21f3347a91d6..1713f7878117 100644
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@@ -115,37 +115,140 @@
 		status = "okay";
 	};
 
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		interrupt-parent = <&intc>;
+	restart: restart-controller {
+		compatible = "st,stih407-restart";
+		st,syscfg = <&syscfg_sbc_reg>;
+		status = "okay";
+	};
+
+	powerdown: powerdown-controller {
+		compatible = "st,stih407-powerdown";
+		#reset-cells = <1>;
+	};
+
+	softreset: softreset-controller {
+		compatible = "st,stih407-softreset";
+		#reset-cells = <1>;
+	};
+
+	picophyreset: picophyreset-controller {
+		compatible = "st,stih407-picophyreset";
+		#reset-cells = <1>;
+	};
+
+	irq-syscfg {
+		compatible    = "st,stih407-irq-syscfg";
+		st,syscfg     = <&syscfg_core>;
+		st,irq-device = <ST_IRQ_SYSCFG_PMU_0>,
+				<ST_IRQ_SYSCFG_PMU_1>;
+		st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>,
+				<ST_IRQ_SYSCFG_DISABLED>;
+	};
+
+	usb2_picophy0: phy1 {
+		compatible = "st,stih407-usb2-phy";
+		#phy-cells = <0>;
+		st,syscfg = <&syscfg_core 0x100 0xf4>;
+		resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+			 <&picophyreset STIH407_PICOPHY2_RESET>;
+		reset-names = "global", "port";
+	};
+
+	miphy28lp_phy: miphy28lp {
+		compatible = "st,miphy28lp-phy";
+		st,syscfg = <&syscfg_core>;
+		#address-cells	= <1>;
+		#size-cells	= <1>;
 		ranges;
-		compatible = "simple-bus";
 
-		restart: restart-controller@0 {
-			compatible = "st,stih407-restart";
-			reg = <0 0>;
-			st,syscfg = <&syscfg_sbc_reg>;
-			status = "okay";
-		};
+		phy_port0: port@9b22000 {
+			reg = <0x9b22000 0xff>,
+			      <0x9b09000 0xff>,
+			      <0x9b04000 0xff>;
+			reg-names = "sata-up",
+				    "pcie-up",
+				    "pipew";
+
+			st,syscfg = <0x114 0x818 0xe0 0xec>;
+			#phy-cells = <1>;
 
-		powerdown: powerdown-controller@0 {
-			compatible = "st,stih407-powerdown";
-			reg = <0 0>;
-			#reset-cells = <1>;
+			reset-names = "miphy-sw-rst";
+			resets = <&softreset STIH407_MIPHY0_SOFTRESET>;
 		};
 
-		softreset: softreset-controller@0 {
-			compatible = "st,stih407-softreset";
-			reg = <0 0>;
-			#reset-cells = <1>;
+		phy_port1: port@9b2a000 {
+			reg = <0x9b2a000 0xff>,
+			      <0x9b19000 0xff>,
+			      <0x9b14000 0xff>;
+			reg-names = "sata-up",
+				    "pcie-up",
+				    "pipew";
+
+			st,syscfg = <0x118 0x81c 0xe4 0xf0>;
+
+			#phy-cells = <1>;
+
+			reset-names = "miphy-sw-rst";
+			resets = <&softreset STIH407_MIPHY1_SOFTRESET>;
 		};
 
-		picophyreset: picophyreset-controller@0 {
-			compatible = "st,stih407-picophyreset";
-			reg = <0 0>;
-			#reset-cells = <1>;
+		phy_port2: port@8f95000 {
+			reg = <0x8f95000 0xff>,
+			      <0x8f90000 0xff>;
+			reg-names = "pipew",
+				    "usb3-up";
+
+			st,syscfg = <0x11c 0x820>;
+
+			#phy-cells = <1>;
+
+			reset-names = "miphy-sw-rst";
+			resets = <&softreset STIH407_MIPHY2_SOFTRESET>;
 		};
+	};
+
+	st231_gp0: st231-gp0 {
+		compatible	= "st,st231-rproc";
+		memory-region	= <&gp0_reserved>;
+		resets		= <&softreset STIH407_ST231_GP0_SOFTRESET>;
+		reset-names	= "sw_reset";
+		clocks		= <&clk_s_c0_flexgen CLK_ST231_GP_0>;
+		clock-frequency	= <600000000>;
+		st,syscfg	= <&syscfg_core 0x22c>;
+		#mbox-cells = <1>;
+		mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx";
+		mboxes = <&mailbox0 0 2>, <&mailbox2 0 1>, <&mailbox0 0 3>, <&mailbox2 0 0>;
+	};
+
+	st231_delta: st231-delta {
+		compatible	= "st,st231-rproc";
+		memory-region	= <&delta_reserved>;
+		resets		= <&softreset STIH407_ST231_DMU_SOFTRESET>;
+		reset-names	= "sw_reset";
+		clocks		= <&clk_s_c0_flexgen CLK_ST231_DMU>;
+		clock-frequency	= <600000000>;
+		st,syscfg	= <&syscfg_core 0x224>;
+		#mbox-cells = <1>;
+		mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx";
+		mboxes = <&mailbox0 0 0>, <&mailbox3 0 1>, <&mailbox0 0 1>, <&mailbox3 0 0>;
+	};
+
+	delta0 {
+		compatible = "st,st-delta";
+		clock-names = "delta",
+			      "delta-st231",
+			      "delta-flash-promip";
+		clocks = <&clk_s_c0_flexgen CLK_VID_DMU>,
+			 <&clk_s_c0_flexgen CLK_ST231_DMU>,
+			 <&clk_s_c0_flexgen CLK_FLASH_PROMIP>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-parent = <&intc>;
+		ranges;
+		compatible = "simple-bus";
 
 		syscfg_sbc: sbc-syscfg@9620000 {
 			compatible = "st,stih407-sbc-syscfg", "syscon";
@@ -189,16 +292,6 @@
 			reg = <0x94b5100 0x1000>;
 		};
 
-		irq-syscfg@0 {
-			compatible    = "st,stih407-irq-syscfg";
-			reg = <0 0>;
-			st,syscfg     = <&syscfg_core>;
-			st,irq-device = <ST_IRQ_SYSCFG_PMU_0>,
-					<ST_IRQ_SYSCFG_PMU_1>;
-			st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>,
-					<ST_IRQ_SYSCFG_DISABLED>;
-		};
-
 		/* Display */
 		vtg_main: sti-vtg-main@8d02800 {
 			compatible = "st,vtg";
@@ -389,70 +482,6 @@
 			status = "disabled";
 		};
 
-		usb2_picophy0: phy1@0 {
-			compatible = "st,stih407-usb2-phy";
-			reg = <0 0>;
-			#phy-cells = <0>;
-			st,syscfg = <&syscfg_core 0x100 0xf4>;
-			resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
-				 <&picophyreset STIH407_PICOPHY2_RESET>;
-			reset-names = "global", "port";
-		};
-
-		miphy28lp_phy: miphy28lp@0 {
-			compatible = "st,miphy28lp-phy";
-			st,syscfg = <&syscfg_core>;
-			#address-cells	= <1>;
-			#size-cells	= <1>;
-			ranges;
-			reg = <0 0>;
-
-			phy_port0: port@9b22000 {
-				reg = <0x9b22000 0xff>,
-				      <0x9b09000 0xff>,
-				      <0x9b04000 0xff>;
-				reg-names = "sata-up",
-					    "pcie-up",
-					    "pipew";
-
-				st,syscfg = <0x114 0x818 0xe0 0xec>;
-				#phy-cells = <1>;
-
-				reset-names = "miphy-sw-rst";
-				resets = <&softreset STIH407_MIPHY0_SOFTRESET>;
-			};
-
-			phy_port1: port@9b2a000 {
-				reg = <0x9b2a000 0xff>,
-				      <0x9b19000 0xff>,
-				      <0x9b14000 0xff>;
-				reg-names = "sata-up",
-					    "pcie-up",
-					    "pipew";
-
-				st,syscfg = <0x118 0x81c 0xe4 0xf0>;
-
-				#phy-cells = <1>;
-
-				reset-names = "miphy-sw-rst";
-				resets = <&softreset STIH407_MIPHY1_SOFTRESET>;
-			};
-
-			phy_port2: port@8f95000 {
-				reg = <0x8f95000 0xff>,
-				      <0x8f90000 0xff>;
-				reg-names = "pipew",
-					    "usb3-up";
-
-				st,syscfg = <0x11c 0x820>;
-
-				#phy-cells = <1>;
-
-				reset-names = "miphy-sw-rst";
-				resets = <&softreset STIH407_MIPHY2_SOFTRESET>;
-			};
-		};
-
 		spi@9840000 {
 			compatible = "st,comms-ssc4-spi";
 			reg = <0x9840000 0x110>;
@@ -815,34 +844,6 @@
 			status		= "okay";
 		};
 
-		st231_gp0: st231-gp0@0 {
-			compatible	= "st,st231-rproc";
-			reg		= <0 0>;
-			memory-region	= <&gp0_reserved>;
-			resets		= <&softreset STIH407_ST231_GP0_SOFTRESET>;
-			reset-names	= "sw_reset";
-			clocks		= <&clk_s_c0_flexgen CLK_ST231_GP_0>;
-			clock-frequency	= <600000000>;
-			st,syscfg	= <&syscfg_core 0x22c>;
-			#mbox-cells = <1>;
-			mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx";
-			mboxes = <&mailbox0 0 2>, <&mailbox2 0 1>, <&mailbox0 0 3>, <&mailbox2 0 0>;
-		};
-
-		st231_delta: st231-delta@0 {
-			compatible	= "st,st231-rproc";
-			reg		= <0 0>;
-			memory-region	= <&delta_reserved>;
-			resets		= <&softreset STIH407_ST231_DMU_SOFTRESET>;
-			reset-names	= "sw_reset";
-			clocks		= <&clk_s_c0_flexgen CLK_ST231_DMU>;
-			clock-frequency	= <600000000>;
-			st,syscfg	= <&syscfg_core 0x224>;
-			#mbox-cells = <1>;
-			mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx";
-			mboxes = <&mailbox0 0 0>, <&mailbox3 0 1>, <&mailbox0 0 1>, <&mailbox3 0 0>;
-		};
-
 		/* fdma audio */
 		fdma0: dma-controller@8e20000 {
 			compatible = "st,stih407-fdma-mpe31-11", "st,slim-rproc";
@@ -986,16 +987,5 @@
 
 			status = "disabled";
 		};
-
-		delta0@0 {
-			compatible = "st,st-delta";
-			reg = <0 0>;
-			clock-names = "delta",
-				      "delta-st231",
-				      "delta-flash-promip";
-			clocks = <&clk_s_c0_flexgen CLK_VID_DMU>,
-				 <&clk_s_c0_flexgen CLK_ST231_DMU>,
-				 <&clk_s_c0_flexgen CLK_FLASH_PROMIP>;
-		};
 	};
 };
diff --git a/arch/arm/boot/dts/stih410-b2120.dts b/arch/arm/boot/dts/stih410-b2120.dts
index 9d3b118f5f0f..538ff98ca1b1 100644
--- a/arch/arm/boot/dts/stih410-b2120.dts
+++ b/arch/arm/boot/dts/stih410-b2120.dts
@@ -24,6 +24,14 @@
 		ethernet0 = &ethernet0;
 	};
 
+	usb2_picophy1: phy2 {
+		status = "okay";
+	};
+
+	usb2_picophy2: phy3 {
+		status = "okay";
+	};
+
 	soc {
 
 		mmc0: sdhci@9060000 {
@@ -33,14 +41,6 @@
 			sd-uhs-ddr50;
 		};
 
-		usb2_picophy1: phy2@0 {
-			status = "okay";
-		};
-
-		usb2_picophy2: phy3@0 {
-			status = "okay";
-		};
-
 		ohci0: usb@9a03c00 {
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts
index 9d579c16c295..26d93f26f6d0 100644
--- a/arch/arm/boot/dts/stih410-b2260.dts
+++ b/arch/arm/boot/dts/stih410-b2260.dts
@@ -75,6 +75,21 @@
 		};
 	};
 
+	miphy28lp_phy: miphy28lp {
+
+		phy_port1: port@9b2a000 {
+			st,osc-force-ext;
+		};
+	};
+
+	usb2_picophy1: phy2 {
+		status = "okay";
+	};
+
+	usb2_picophy2: phy3 {
+		status = "okay";
+	};
+
 	soc {
 		/* Low speed expansion connector */
 		uart0: serial@9830000 {
@@ -145,14 +160,6 @@
 			status = "okay";
 		};
 
-		usb2_picophy1: phy2@0 {
-			status = "okay";
-		};
-
-		usb2_picophy2: phy3@0 {
-			status = "okay";
-		};
-
 		ohci0: usb@9a03c00 {
 			status = "okay";
 		};
@@ -196,13 +203,6 @@
 			status = "okay";
 		};
 
-		miphy28lp_phy: miphy28lp@0 {
-
-			phy_port1: port@9b2a000 {
-				st,osc-force-ext;
-			};
-		};
-
 		sata1: sata@9b28000 {
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/stih410-clock.dtsi b/arch/arm/boot/dts/stih410-clock.dtsi
index 6b0e6d4477a3..abac98a1810b 100644
--- a/arch/arm/boot/dts/stih410-clock.dtsi
+++ b/arch/arm/boot/dts/stih410-clock.dtsi
@@ -32,7 +32,7 @@
 		 */
 		clockgen-a9@92b0000 {
 			compatible = "st,clkgen-c32";
-			reg = <0x92b0000 0xffff>;
+			reg = <0x92b0000 0x10000>;
 
 			clockgen_a9_pll: clockgen-a9-pll {
 				#clock-cells = <1>;
@@ -40,29 +40,29 @@
 
 				clocks = <&clk_sysin>;
 			};
-		};
 
-		/*
-		 * ARM CPU related clocks.
-		 */
-		clk_m_a9: clk-m-a9@92b0000 {
-			#clock-cells = <0>;
-			compatible = "st,stih407-clkgen-a9-mux", "st,clkgen-mux";
-			reg = <0x92b0000 0x10000>;
-
-			clocks = <&clockgen_a9_pll 0>,
-				 <&clockgen_a9_pll 0>,
-				 <&clk_s_c0_flexgen 13>,
-				 <&clk_m_a9_ext2f_div2>;
 			/*
-			 * ARM Peripheral clock for timers
+			 * ARM CPU related clocks.
 			 */
-			arm_periph_clk: clk-m-a9-periphs {
+			clk_m_a9: clk-m-a9 {
 				#clock-cells = <0>;
-				compatible = "fixed-factor-clock";
-				clocks = <&clk_m_a9>;
-				clock-div = <2>;
-				clock-mult = <1>;
+				compatible = "st,stih407-clkgen-a9-mux", "st,clkgen-mux";
+
+				clocks = <&clockgen_a9_pll 0>,
+					 <&clockgen_a9_pll 0>,
+					 <&clk_s_c0_flexgen 13>,
+					 <&clk_m_a9_ext2f_div2>;
+
+				/*
+				 * ARM Peripheral clock for timers
+				 */
+				arm_periph_clk: clk-m-a9-periphs {
+					#clock-cells = <0>;
+					compatible = "fixed-factor-clock";
+					clocks = <&clk_m_a9>;
+					clock-div = <2>;
+					clock-mult = <1>;
+				};
 			};
 		};
 
@@ -87,14 +87,6 @@
 			};
 		};
 
-		clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 {
-			#clock-cells = <1>;
-			compatible = "st,quadfs-pll";
-			reg = <0x9103000 0x1000>;
-
-			clocks = <&clk_sysin>;
-		};
-
 		clk_s_c0: clockgen-c@9103000 {
 			compatible = "st,clkgen-c32";
 			reg = <0x9103000 0x1000>;
@@ -113,6 +105,13 @@
 				clocks = <&clk_sysin>;
 			};
 
+			clk_s_c0_quadfs: clk-s-c0-quadfs {
+				#clock-cells = <1>;
+				compatible = "st,quadfs-pll";
+
+				clocks = <&clk_sysin>;
+			};
+
 			clk_s_c0_flexgen: clk-s-c0-flexgen {
 				#clock-cells = <1>;
 				compatible = "st,flexgen", "st,flexgen-stih410-c0";
@@ -142,18 +141,17 @@
 			};
 		};
 
-		clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 {
-			#clock-cells = <1>;
-			compatible = "st,quadfs-d0";
-			reg = <0x9104000 0x1000>;
-
-			clocks = <&clk_sysin>;
-		};
-
 		clockgen-d0@9104000 {
 			compatible = "st,clkgen-c32";
 			reg = <0x9104000 0x1000>;
 
+			clk_s_d0_quadfs: clk-s-d0-quadfs {
+				#clock-cells = <1>;
+				compatible = "st,quadfs-d0";
+
+				clocks = <&clk_sysin>;
+			};
+
 			clk_s_d0_flexgen: clk-s-d0-flexgen {
 				#clock-cells = <1>;
 				compatible = "st,flexgen", "st,flexgen-stih410-d0";
@@ -166,18 +164,17 @@
 			};
 		};
 
-		clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 {
-			#clock-cells = <1>;
-			compatible = "st,quadfs-d2";
-			reg = <0x9106000 0x1000>;
-
-			clocks = <&clk_sysin>;
-		};
-
 		clockgen-d2@9106000 {
 			compatible = "st,clkgen-c32";
 			reg = <0x9106000 0x1000>;
 
+			clk_s_d2_quadfs: clk-s-d2-quadfs {
+				#clock-cells = <1>;
+				compatible = "st,quadfs-d2";
+
+				clocks = <&clk_sysin>;
+			};
+
 			clk_s_d2_flexgen: clk-s-d2-flexgen {
 				#clock-cells = <1>;
 				compatible = "st,flexgen", "st,flexgen-stih407-d2";
@@ -192,18 +189,17 @@
 			};
 		};
 
-		clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
-			#clock-cells = <1>;
-			compatible = "st,quadfs-d3";
-			reg = <0x9107000 0x1000>;
-
-			clocks = <&clk_sysin>;
-		};
-
 		clockgen-d3@9107000 {
 			compatible = "st,clkgen-c32";
 			reg = <0x9107000 0x1000>;
 
+			clk_s_d3_quadfs: clk-s-d3-quadfs {
+				#clock-cells = <1>;
+				compatible = "st,quadfs-d3";
+
+				clocks = <&clk_sysin>;
+			};
+
 			clk_s_d3_flexgen: clk-s-d3-flexgen {
 				#clock-cells = <1>;
 				compatible = "st,flexgen", "st,flexgen-stih407-d3";
diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
index 6d847019c554..ce2f62cf129b 100644
--- a/arch/arm/boot/dts/stih410.dtsi
+++ b/arch/arm/boot/dts/stih410.dtsi
@@ -12,31 +12,29 @@
 		bdisp0 = &bdisp0;
 	};
 
-	soc {
-		usb2_picophy1: phy2@0 {
-			compatible = "st,stih407-usb2-phy";
-			reg = <0 0>;
-			#phy-cells = <0>;
-			st,syscfg = <&syscfg_core 0xf8 0xf4>;
-			resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
-				 <&picophyreset STIH407_PICOPHY0_RESET>;
-			reset-names = "global", "port";
-
-			status = "disabled";
-		};
+	usb2_picophy1: phy2 {
+		compatible = "st,stih407-usb2-phy";
+		#phy-cells = <0>;
+		st,syscfg = <&syscfg_core 0xf8 0xf4>;
+		resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+			 <&picophyreset STIH407_PICOPHY0_RESET>;
+		reset-names = "global", "port";
+
+		status = "disabled";
+	};
 
-		usb2_picophy2: phy3@0 {
-			compatible = "st,stih407-usb2-phy";
-			reg = <0 0>;
-			#phy-cells = <0>;
-			st,syscfg = <&syscfg_core 0xfc 0xf4>;
-			resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
-				 <&picophyreset STIH407_PICOPHY1_RESET>;
-			reset-names = "global", "port";
+	usb2_picophy2: phy3 {
+		compatible = "st,stih407-usb2-phy";
+		#phy-cells = <0>;
+		st,syscfg = <&syscfg_core 0xfc 0xf4>;
+		resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+			 <&picophyreset STIH407_PICOPHY1_RESET>;
+		reset-names = "global", "port";
 
-			status = "disabled";
-		};
+		status = "disabled";
+	};
 
+	soc {
 		ohci0: usb@9a03c00 {
 			compatible = "st,st-ohci-300x";
 			reg = <0x9a03c00 0x100>;
@@ -274,16 +272,6 @@
 			interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>;
 		};
 
-		delta0@0 {
-			compatible = "st,st-delta";
-			clock-names = "delta",
-				      "delta-st231",
-				      "delta-flash-promip";
-			clocks = <&clk_s_c0_flexgen CLK_VID_DMU>,
-				 <&clk_s_c0_flexgen CLK_ST231_DMU>,
-				 <&clk_s_c0_flexgen CLK_FLASH_PROMIP>;
-		};
-
 		sti-cec@94a087c {
 			compatible = "st,stih-cec";
 			reg = <0x94a087c 0x64>;
diff --git a/arch/arm/boot/dts/stih418-b2199.dts b/arch/arm/boot/dts/stih418-b2199.dts
index b66e2b29edea..d21bcc7c1271 100644
--- a/arch/arm/boot/dts/stih418-b2199.dts
+++ b/arch/arm/boot/dts/stih418-b2199.dts
@@ -37,6 +37,17 @@
 		};
 	};
 
+	miphy28lp_phy: miphy28lp {
+
+		phy_port0: port@9b22000 {
+			st,osc-rdy;
+		};
+
+		phy_port1: port@9b2a000 {
+			st,osc-force-ext;
+		};
+	};
+
 	soc {
 		sbc_serial0: serial@9530000 {
 			status = "okay";
@@ -84,17 +95,6 @@
 			non-removable;
 		};
 
-		miphy28lp_phy: miphy28lp@0 {
-
-			phy_port0: port@9b22000 {
-				st,osc-rdy;
-			};
-
-			phy_port1: port@9b2a000 {
-				st,osc-force-ext;
-			};
-		};
-
 		st_dwc3: dwc3@8f94000 {
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/stih418-clock.dtsi b/arch/arm/boot/dts/stih418-clock.dtsi
index e84c476b83ed..e1749e92a2e7 100644
--- a/arch/arm/boot/dts/stih418-clock.dtsi
+++ b/arch/arm/boot/dts/stih418-clock.dtsi
@@ -32,7 +32,7 @@
 		 */
 		clockgen-a9@92b0000 {
 			compatible = "st,clkgen-c32";
-			reg = <0x92b0000 0xffff>;
+			reg = <0x92b0000 0x10000>;
 
 			clockgen_a9_pll: clockgen-a9-pll {
 				#clock-cells = <1>;
@@ -40,30 +40,29 @@
 
 				clocks = <&clk_sysin>;
 			};
-		};
-
-		/*
-		 * ARM CPU related clocks.
-		 */
-		clk_m_a9: clk-m-a9@92b0000 {
-			#clock-cells = <0>;
-			compatible = "st,stih407-clkgen-a9-mux", "st,clkgen-mux";
-			reg = <0x92b0000 0x10000>;
-
-			clocks = <&clockgen_a9_pll 0>,
-				 <&clockgen_a9_pll 0>,
-				 <&clk_s_c0_flexgen 13>,
-				 <&clk_m_a9_ext2f_div2>;
 
 			/*
-			 * ARM Peripheral clock for timers
+			 * ARM CPU related clocks.
 			 */
-			arm_periph_clk: clk-m-a9-periphs {
+			clk_m_a9: clk-m-a9 {
 				#clock-cells = <0>;
-				compatible = "fixed-factor-clock";
-				clocks = <&clk_m_a9>;
-				clock-div = <2>;
-				clock-mult = <1>;
+				compatible = "st,stih407-clkgen-a9-mux", "st,clkgen-mux";
+
+				clocks = <&clockgen_a9_pll 0>,
+					 <&clockgen_a9_pll 0>,
+					 <&clk_s_c0_flexgen 13>,
+					 <&clk_m_a9_ext2f_div2>;
+
+				/*
+				 * ARM Peripheral clock for timers
+				 */
+				arm_periph_clk: clk-m-a9-periphs {
+					#clock-cells = <0>;
+					compatible = "fixed-factor-clock";
+					clocks = <&clk_m_a9>;
+					clock-div = <2>;
+					clock-mult = <1>;
+				};
 			};
 		};
 
@@ -88,14 +87,6 @@
 			};
 		};
 
-		clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 {
-			#clock-cells = <1>;
-			compatible = "st,quadfs-pll";
-			reg = <0x9103000 0x1000>;
-
-			clocks = <&clk_sysin>;
-		};
-
 		clk_s_c0: clockgen-c@9103000 {
 			compatible = "st,clkgen-c32";
 			reg = <0x9103000 0x1000>;
@@ -114,6 +105,13 @@
 				clocks = <&clk_sysin>;
 			};
 
+			clk_s_c0_quadfs: clk-s-c0-quadfs {
+				#clock-cells = <1>;
+				compatible = "st,quadfs-pll";
+
+				clocks = <&clk_sysin>;
+			};
+
 			clk_s_c0_flexgen: clk-s-c0-flexgen {
 				#clock-cells = <1>;
 				compatible = "st,flexgen", "st,flexgen-stih418-c0";
@@ -143,18 +141,17 @@
 			};
 		};
 
-		clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 {
-			#clock-cells = <1>;
-			compatible = "st,quadfs-d0";
-			reg = <0x9104000 0x1000>;
-
-			clocks = <&clk_sysin>;
-		};
-
 		clockgen-d0@9104000 {
 			compatible = "st,clkgen-c32";
 			reg = <0x9104000 0x1000>;
 
+			clk_s_d0_quadfs: clk-s-d0-quadfs {
+				#clock-cells = <1>;
+				compatible = "st,quadfs-d0";
+
+				clocks = <&clk_sysin>;
+			};
+
 			clk_s_d0_flexgen: clk-s-d0-flexgen {
 				#clock-cells = <1>;
 				compatible = "st,flexgen", "st,flexgen-stih410-d0";
@@ -167,18 +164,17 @@
 			};
 		};
 
-		clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 {
-			#clock-cells = <1>;
-			compatible = "st,quadfs-d2";
-			reg = <0x9106000 0x1000>;
-
-			clocks = <&clk_sysin>;
-		};
-
 		clockgen-d2@9106000 {
 			compatible = "st,clkgen-c32";
 			reg = <0x9106000 0x1000>;
 
+			clk_s_d2_quadfs: clk-s-d2-quadfs {
+				#clock-cells = <1>;
+				compatible = "st,quadfs-d2";
+
+				clocks = <&clk_sysin>;
+			};
+
 			clk_s_d2_flexgen: clk-s-d2-flexgen {
 				#clock-cells = <1>;
 				compatible = "st,flexgen", "st,flexgen-stih418-d2";
@@ -193,18 +189,17 @@
 			};
 		};
 
-		clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
-			#clock-cells = <1>;
-			compatible = "st,quadfs-d3";
-			reg = <0x9107000 0x1000>;
-
-			clocks = <&clk_sysin>;
-		};
-
 		clockgen-d3@9107000 {
 			compatible = "st,clkgen-c32";
 			reg = <0x9107000 0x1000>;
 
+			clk_s_d3_quadfs: clk-s-d3-quadfs {
+				#clock-cells = <1>;
+				compatible = "st,quadfs-d3";
+
+				clocks = <&clk_sysin>;
+			};
+
 			clk_s_d3_flexgen: clk-s-d3-flexgen {
 				#clock-cells = <1>;
 				compatible = "st,flexgen", "st,flexgen-stih407-d3";
diff --git a/arch/arm/boot/dts/stih418.dtsi b/arch/arm/boot/dts/stih418.dtsi
index 97eda4392fbe..b35b9b7a7ccc 100644
--- a/arch/arm/boot/dts/stih418.dtsi
+++ b/arch/arm/boot/dts/stih418.dtsi
@@ -26,31 +26,29 @@
 		};
 	};
 
+	usb2_picophy1: phy2 {
+		compatible = "st,stih407-usb2-phy";
+		#phy-cells = <0>;
+		st,syscfg = <&syscfg_core 0xf8 0xf4>;
+		resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+			 <&picophyreset STIH407_PICOPHY0_RESET>;
+		reset-names = "global", "port";
+	};
+
+	usb2_picophy2: phy3 {
+		compatible = "st,stih407-usb2-phy";
+		#phy-cells = <0>;
+		st,syscfg = <&syscfg_core 0xfc 0xf4>;
+		resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+			 <&picophyreset STIH407_PICOPHY1_RESET>;
+		reset-names = "global", "port";
+	};
+
 	soc {
 		rng11: rng@8a8a000 {
 			status = "disabled";
 		};
 
-		usb2_picophy1: phy2@0 {
-			compatible = "st,stih407-usb2-phy";
-			reg = <0 0>;
-			#phy-cells = <0>;
-			st,syscfg = <&syscfg_core 0xf8 0xf4>;
-			resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
-				 <&picophyreset STIH407_PICOPHY0_RESET>;
-			reset-names = "global", "port";
-		};
-
-		usb2_picophy2: phy3@0 {
-			compatible = "st,stih407-usb2-phy";
-			reg = <0 0>;
-			#phy-cells = <0>;
-			st,syscfg = <&syscfg_core 0xfc 0xf4>;
-			resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
-				 <&picophyreset STIH407_PICOPHY1_RESET>;
-			reset-names = "global", "port";
-		};
-
 		ohci0: usb@9a03c00 {
 			compatible = "st,st-ohci-300x";
 			reg = <0x9a03c00 0x100>;
diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi
index d051f080e52e..4c72dedcd1be 100644
--- a/arch/arm/boot/dts/stihxxx-b2120.dtsi
+++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi
@@ -71,6 +71,17 @@
 		};
 	};
 
+	miphy28lp_phy: miphy28lp {
+
+		phy_port0: port@9b22000 {
+			st,osc-rdy;
+		};
+
+		phy_port1: port@9b2a000 {
+			st,osc-force-ext;
+		};
+	};
+
 	soc {
 		sbc_serial0: serial@9530000 {
 			status = "okay";
@@ -128,17 +139,6 @@
 			st,i2c-min-sda-pulse-width-us = <5>;
 		};
 
-		miphy28lp_phy: miphy28lp@0 {
-
-			phy_port0: port@9b22000 {
-				st,osc-rdy;
-			};
-
-			phy_port1: port@9b2a000 {
-				st,osc-force-ext;
-			};
-		};
-
 		st_dwc3: dwc3@8f94000 {
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts
index cb46326a8c75..0d98aca01736 100644
--- a/arch/arm/boot/dts/stm32429i-eval.dts
+++ b/arch/arm/boot/dts/stm32429i-eval.dts
@@ -308,6 +308,18 @@
 	};
 };
 
+&timers5 {
+	/* Override timer5 to act as clockevent */
+	compatible = "st,stm32-timer";
+	interrupts = <50>;
+	status = "okay";
+	/delete-property/#address-cells;
+	/delete-property/#size-cells;
+	/delete-property/clock-names;
+	/delete-node/pwm;
+	/delete-node/timer@4;
+};
+
 &usart1 {
 	pinctrl-0 = <&usart1_pins_a>;
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/stm32746g-eval.dts b/arch/arm/boot/dts/stm32746g-eval.dts
index 327613fd9666..a293e65141c6 100644
--- a/arch/arm/boot/dts/stm32746g-eval.dts
+++ b/arch/arm/boot/dts/stm32746g-eval.dts
@@ -194,6 +194,18 @@
 	bus-width = <4>;
 };
 
+&timers5 {
+	/* Override timer5 to act as clockevent */
+	compatible = "st,stm32-timer";
+	interrupts = <50>;
+	status = "okay";
+	/delete-property/#address-cells;
+	/delete-property/#size-cells;
+	/delete-property/clock-names;
+	/delete-node/pwm;
+	/delete-node/timer@4;
+};
+
 &usart1 {
 	pinctrl-0 = <&usart1_pins_a>;
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts
index 6435e099c632..3b81228d46a2 100644
--- a/arch/arm/boot/dts/stm32f429-disco.dts
+++ b/arch/arm/boot/dts/stm32f429-disco.dts
@@ -205,6 +205,18 @@
 	};
 };
 
+&timers5 {
+	/* Override timer5 to act as clockevent */
+	compatible = "st,stm32-timer";
+	interrupts = <50>;
+	status = "okay";
+	/delete-property/#address-cells;
+	/delete-property/#size-cells;
+	/delete-property/clock-names;
+	/delete-node/pwm;
+	/delete-node/timer@4;
+};
+
 &usart1 {
 	pinctrl-0 = <&usart1_pins_a>;
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index 8748d5850298..c31ceb821231 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -93,14 +93,6 @@
 			};
 		};
 
-		timer2: timer@40000000 {
-			compatible = "st,stm32-timer";
-			reg = <0x40000000 0x400>;
-			interrupts = <28>;
-			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM2)>;
-			status = "disabled";
-		};
-
 		timers2: timers@40000000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -123,14 +115,6 @@
 			};
 		};
 
-		timer3: timer@40000400 {
-			compatible = "st,stm32-timer";
-			reg = <0x40000400 0x400>;
-			interrupts = <29>;
-			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM3)>;
-			status = "disabled";
-		};
-
 		timers3: timers@40000400 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -153,14 +137,6 @@
 			};
 		};
 
-		timer4: timer@40000800 {
-			compatible = "st,stm32-timer";
-			reg = <0x40000800 0x400>;
-			interrupts = <30>;
-			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM4)>;
-			status = "disabled";
-		};
-
 		timers4: timers@40000800 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -183,13 +159,6 @@
 			};
 		};
 
-		timer5: timer@40000c00 {
-			compatible = "st,stm32-timer";
-			reg = <0x40000c00 0x400>;
-			interrupts = <50>;
-			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM5)>;
-		};
-
 		timers5: timers@40000c00 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -212,14 +181,6 @@
 			};
 		};
 
-		timer6: timer@40001000 {
-			compatible = "st,stm32-timer";
-			reg = <0x40001000 0x400>;
-			interrupts = <54>;
-			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM6)>;
-			status = "disabled";
-		};
-
 		timers6: timers@40001000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -236,14 +197,6 @@
 			};
 		};
 
-		timer7: timer@40001400 {
-			compatible = "st,stm32-timer";
-			reg = <0x40001400 0x400>;
-			interrupts = <55>;
-			clocks = <&rcc 0 STM32F4_APB1_CLOCK(TIM7)>;
-			status = "disabled";
-		};
-
 		timers7: timers@40001400 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -759,6 +712,16 @@
 			status = "disabled";
 		};
 
+		dma2d: dma2d@4002b000 {
+			compatible = "st,stm32-dma2d";
+			reg = <0x4002b000 0xc00>;
+			interrupts = <90>;
+			resets = <&rcc STM32F4_AHB1_RESET(DMA2D)>;
+			clocks = <&rcc 0 STM32F4_AHB1_CLOCK(DMA2D)>;
+			clock-names = "dma2d";
+			status = "disabled";
+		};
+
 		usbotg_hs: usb@40040000 {
 			compatible = "snps,dwc2";
 			reg = <0x40040000 0x40000>;
diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts
index 30905ce672a0..5a0daf8e8b11 100644
--- a/arch/arm/boot/dts/stm32f469-disco.dts
+++ b/arch/arm/boot/dts/stm32f469-disco.dts
@@ -132,6 +132,10 @@
 	clock-frequency = <8000000>;
 };
 
+&dma2d {
+	status = "okay";
+};
+
 &dsi {
 	#address-cells = <1>;
 	#size-cells = <0>;
@@ -224,6 +228,18 @@
 	bus-width = <4>;
 };
 
+&timers5 {
+	/* Override timer5 to act as clockevent */
+	compatible = "st,stm32-timer";
+	interrupts = <50>;
+	status = "okay";
+	/delete-property/#address-cells;
+	/delete-property/#size-cells;
+	/delete-property/clock-names;
+	/delete-node/pwm;
+	/delete-node/timer@4;
+};
+
 &usart3 {
 	pinctrl-0 = <&usart3_pins_a>;
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/stm32f746-disco.dts b/arch/arm/boot/dts/stm32f746-disco.dts
index 569d23cc61e5..c11616ed5fc6 100644
--- a/arch/arm/boot/dts/stm32f746-disco.dts
+++ b/arch/arm/boot/dts/stm32f746-disco.dts
@@ -109,6 +109,18 @@
 	bus-width = <4>;
 };
 
+&timers5 {
+	/* Override timer5 to act as clockevent */
+	compatible = "st,stm32-timer";
+	interrupts = <50>;
+	status = "okay";
+	/delete-property/#address-cells;
+	/delete-property/#size-cells;
+	/delete-property/clock-names;
+	/delete-node/pwm;
+	/delete-node/timer@4;
+};
+
 &usart1 {
 	pinctrl-0 = <&usart1_pins_b>;
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi
index 014b416f57e6..dc868e6da40e 100644
--- a/arch/arm/boot/dts/stm32f746.dtsi
+++ b/arch/arm/boot/dts/stm32f746.dtsi
@@ -75,14 +75,6 @@
 	};
 
 	soc {
-		timer2: timer@40000000 {
-			compatible = "st,stm32-timer";
-			reg = <0x40000000 0x400>;
-			interrupts = <28>;
-			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM2)>;
-			status = "disabled";
-		};
-
 		timers2: timers@40000000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -105,14 +97,6 @@
 			};
 		};
 
-		timer3: timer@40000400 {
-			compatible = "st,stm32-timer";
-			reg = <0x40000400 0x400>;
-			interrupts = <29>;
-			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM3)>;
-			status = "disabled";
-		};
-
 		timers3: timers@40000400 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -135,14 +119,6 @@
 			};
 		};
 
-		timer4: timer@40000800 {
-			compatible = "st,stm32-timer";
-			reg = <0x40000800 0x400>;
-			interrupts = <30>;
-			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM4)>;
-			status = "disabled";
-		};
-
 		timers4: timers@40000800 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -165,13 +141,6 @@
 			};
 		};
 
-		timer5: timer@40000c00 {
-			compatible = "st,stm32-timer";
-			reg = <0x40000c00 0x400>;
-			interrupts = <50>;
-			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM5)>;
-		};
-
 		timers5: timers@40000c00 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -194,14 +163,6 @@
 			};
 		};
 
-		timer6: timer@40001000 {
-			compatible = "st,stm32-timer";
-			reg = <0x40001000 0x400>;
-			interrupts = <54>;
-			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM6)>;
-			status = "disabled";
-		};
-
 		timers6: timers@40001000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -218,14 +179,6 @@
 			};
 		};
 
-		timer7: timer@40001400 {
-			compatible = "st,stm32-timer";
-			reg = <0x40001400 0x400>;
-			interrupts = <55>;
-			clocks = <&rcc 0 STM32F7_APB1_CLOCK(TIM7)>;
-			status = "disabled";
-		};
-
 		timers7: timers@40001400 {
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/arm/boot/dts/stm32f769-disco.dts b/arch/arm/boot/dts/stm32f769-disco.dts
index be943b701980..b038d0ed39e8 100644
--- a/arch/arm/boot/dts/stm32f769-disco.dts
+++ b/arch/arm/boot/dts/stm32f769-disco.dts
@@ -137,6 +137,18 @@
 	bus-width = <4>;
 };
 
+&timers5 {
+	/* Override timer5 to act as clockevent */
+	compatible = "st,stm32-timer";
+	interrupts = <50>;
+	status = "okay";
+	/delete-property/#address-cells;
+	/delete-property/#size-cells;
+	/delete-property/clock-names;
+	/delete-node/pwm;
+	/delete-node/timer@4;
+};
+
 &usart1 {
 	pinctrl-0 = <&usart1_pins_a>;
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi
index 069f95f2b628..d2472cd8f1d0 100644
--- a/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi
@@ -7,7 +7,7 @@
 
 &pinctrl {
 	sdmmc1_b4_pins_a: sdmmc1-b4-0 {
-		pins1 {
+		pins {
 			pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
 				 <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
 				 <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
@@ -17,12 +17,6 @@
 			drive-push-pull;
 			bias-disable;
 		};
-		pins2 {
-			pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
-			slew-rate = <2>;
-			drive-push-pull;
-			bias-disable;
-		};
 	};
 
 	sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 {
@@ -36,16 +30,81 @@
 			bias-disable;
 		};
 		pins2 {
+			pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+			slew-rate = <1>;
+			drive-open-drain;
+			bias-disable;
+		};
+	};
+
+	sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */
+				 <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */
+				 <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */
+				 <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */
+				 <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */
+				 <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */
+		};
+	};
+
+	sdmmc1_clk_pins_a: sdmmc1-clk-0 {
+		pins {
 			pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
-			slew-rate = <2>;
+			slew-rate = <1>;
 			drive-push-pull;
 			bias-disable;
 		};
-		pins3 {
-			pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+	};
+
+	sdmmc2_b4_pins_a: sdmmc2-b4-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 14, AF10)>, /* SDMMC2_D0 */
+				 <STM32_PINMUX('B', 15, AF10)>, /* SDMMC2_D1 */
+				 <STM32_PINMUX('B', 3, AF10)>, /* SDMMC2_D2 */
+				 <STM32_PINMUX('B', 4, AF10)>, /* SDMMC2_D3 */
+				 <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+	};
+
+	sdmmc2_b4_od_pins_a: sdmmc2-b4-od-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 14, AF10)>, /* SDMMC2_D0 */
+				 <STM32_PINMUX('B', 15, AF10)>, /* SDMMC2_D1 */
+				 <STM32_PINMUX('B', 3, AF10)>, /* SDMMC2_D2 */
+				 <STM32_PINMUX('B', 4, AF10)>; /* SDMMC2_D3 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
 			slew-rate = <1>;
 			drive-open-drain;
-			bias-disable;
+			bias-pull-up;
+		};
+	};
+
+	sdmmc2_b4_sleep_pins_a: sdmmc2-b4-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */
+				 <STM32_PINMUX('B', 15, ANALOG)>, /* SDMMC2_D1 */
+				 <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2_D2 */
+				 <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2_D3 */
+				 <STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */
+				 <STM32_PINMUX('G', 6, ANALOG)>; /* SDMMC2_CMD */
+		};
+	};
+
+	sdmmc2_clk_pins_a: sdmmc2-clk-0 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 3, AF10)>; /* SDMMC2_CK */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/stm32mp131.dtsi b/arch/arm/boot/dts/stm32mp131.dtsi
index 86126dc0d898..1708c79b5254 100644
--- a/arch/arm/boot/dts/stm32mp131.dtsi
+++ b/arch/arm/boot/dts/stm32mp131.dtsi
@@ -92,10 +92,10 @@
 
 	timer {
 		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
 		interrupt-parent = <&intc>;
 		always-on;
 	};
@@ -115,15 +115,76 @@
 			status = "disabled";
 		};
 
+		dma1: dma-controller@48000000 {
+			compatible = "st,stm32-dma";
+			reg = <0x48000000 0x400>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_pclk4>;
+			#dma-cells = <4>;
+			st,mem2mem;
+			dma-requests = <8>;
+		};
+
+		dma2: dma-controller@48001000 {
+			compatible = "st,stm32-dma";
+			reg = <0x48001000 0x400>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_pclk4>;
+			#dma-cells = <4>;
+			st,mem2mem;
+			dma-requests = <8>;
+		};
+
+		dmamux1: dma-router@48002000 {
+			compatible = "st,stm32h7-dmamux";
+			reg = <0x48002000 0x40>;
+			clocks = <&clk_pclk4>;
+			#dma-cells = <3>;
+			dma-masters = <&dma1 &dma2>;
+			dma-requests = <128>;
+			dma-channels = <16>;
+		};
+
+		exti: interrupt-controller@5000d000 {
+			compatible = "st,stm32mp13-exti", "syscon";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x5000d000 0x400>;
+		};
+
 		syscfg: syscon@50020000 {
 			compatible = "st,stm32mp157-syscfg", "syscon";
 			reg = <0x50020000 0x400>;
 			clocks = <&clk_pclk3>;
 		};
 
+		mdma: dma-controller@58000000 {
+			compatible = "st,stm32h7-mdma";
+			reg = <0x58000000 0x1000>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_pclk4>;
+			#dma-cells = <5>;
+			dma-channels = <32>;
+			dma-requests = <48>;
+		};
+
 		sdmmc1: mmc@58005000 {
-			compatible = "arm,pl18x", "arm,primecell";
-			arm,primecell-periphid = <0x00253180>;
+			compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x20253180>;
 			reg = <0x58005000 0x1000>, <0x58006000 0x1000>;
 			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "cmd_irq";
@@ -131,7 +192,21 @@
 			clock-names = "apb_pclk";
 			cap-sd-highspeed;
 			cap-mmc-highspeed;
-			max-frequency = <120000000>;
+			max-frequency = <130000000>;
+			status = "disabled";
+		};
+
+		sdmmc2: mmc@58007000 {
+			compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
+			arm,primecell-periphid = <0x20253180>;
+			reg = <0x58007000 0x1000>, <0x58008000 0x1000>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cmd_irq";
+			clocks = <&clk_pll4_p>;
+			clock-names = "apb_pclk";
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			max-frequency = <130000000>;
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/stm32mp135f-dk.dts b/arch/arm/boot/dts/stm32mp135f-dk.dts
index 7e96d9e36217..ee100d108ea2 100644
--- a/arch/arm/boot/dts/stm32mp135f-dk.dts
+++ b/arch/arm/boot/dts/stm32mp135f-dk.dts
@@ -38,9 +38,10 @@
 };
 
 &sdmmc1 {
-	pinctrl-names = "default", "opendrain";
-	pinctrl-0 = <&sdmmc1_b4_pins_a>;
-	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_clk_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_clk_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
 	broken-cd;
 	disable-wp;
 	st,neg-edge;
diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
index 3b65130affec..f0d66d8c6e3b 100644
--- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
@@ -338,6 +338,47 @@
 		};
 	};
 
+	ethernet0_rmii_pins_b: rmii-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 5, AF0)>, /* ETH1_CLK */
+				<STM32_PINMUX('C', 1, AF11)>, /* ETH1_MDC */
+				<STM32_PINMUX('G', 13, AF11)>, /* ETH1_TXD0 */
+				<STM32_PINMUX('G', 14, AF11)>; /* ETH1_TXD1 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH1_MDIO */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('A', 7, AF11)>, /* ETH1_CRS_DV */
+				<STM32_PINMUX('C', 4, AF11)>, /* ETH1_RXD0 */
+				<STM32_PINMUX('C', 5, AF11)>; /* ETH1_RXD1 */
+			bias-disable;
+		};
+		pins4 {
+			pinmux = <STM32_PINMUX('B', 11, AF11)>; /* ETH1_TX_EN */
+		};
+	};
+
+	ethernet0_rmii_sleep_pins_b: rmii-sleep-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('A', 2, ANALOG)>, /* ETH1_MDIO */
+				<STM32_PINMUX('A', 7, ANALOG)>, /* ETH1_CRS_DV */
+				<STM32_PINMUX('B', 5, ANALOG)>, /* ETH1_CLK */
+				<STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_TX_EN */
+				<STM32_PINMUX('C', 1, ANALOG)>, /* ETH1_MDC */
+				<STM32_PINMUX('C', 4, ANALOG)>, /* ETH1_RXD0 */
+				<STM32_PINMUX('C', 5, ANALOG)>, /* ETH1_RXD1 */
+				<STM32_PINMUX('G', 13, ANALOG)>, /* ETH1_TXD0 */
+				<STM32_PINMUX('G', 14, ANALOG)>; /* ETH1_TXD1 */
+		};
+	};
+
 	fmc_pins_a: fmc-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */
@@ -927,6 +968,21 @@
 		};
 	};
 
+	pwm1_pins_b: pwm1-1 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 9, AF1)>; /* TIM1_CH1 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm1_sleep_pins_b: pwm1-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 9, ANALOG)>; /* TIM1_CH1 */
+		};
+	};
+
 	pwm2_pins_a: pwm2-0 {
 		pins {
 			pinmux = <STM32_PINMUX('A', 3, AF1)>; /* TIM2_CH4 */
@@ -1190,7 +1246,7 @@
 		};
 	};
 
-	sai2a_sleep_pins_c: sai2a-2 {
+	sai2a_sleep_pins_c: sai2a-sleep-2 {
 		pins {
 			pinmux = <STM32_PINMUX('D', 13, ANALOG)>, /* SAI2_SCK_A */
 				 <STM32_PINMUX('D', 11, ANALOG)>, /* SAI2_SD_A */
@@ -2042,6 +2098,42 @@
 		};
 	};
 
+	usart3_pins_d: usart3-3 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
+				 <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 9, AF7)>, /* USART3_RX */
+				 <STM32_PINMUX('D', 11, AF7)>; /* USART3_CTS_NSS */
+			bias-disable;
+		};
+	};
+
+	usart3_idle_pins_d: usart3-idle-3 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
+				 <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
+				 <STM32_PINMUX('D', 11, ANALOG)>; /* USART3_CTS_NSS */
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 9, AF7)>; /* USART3_RX */
+			bias-disable;
+		};
+	};
+
+	usart3_sleep_pins_d: usart3-sleep-3 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* USART3_TX */
+				 <STM32_PINMUX('G', 8, ANALOG)>, /* USART3_RTS */
+				 <STM32_PINMUX('D', 11, ANALOG)>, /* USART3_CTS_NSS */
+				 <STM32_PINMUX('D', 9, ANALOG)>; /* USART3_RX */
+		};
+	};
+
 	usbotg_hs_pins_a: usbotg-hs-0 {
 		pins {
 			pinmux = <STM32_PINMUX('A', 10, ANALOG)>; /* OTG_ID */
diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi
index 1cfc2f011e70..f9aa9af31efd 100644
--- a/arch/arm/boot/dts/stm32mp151.dtsi
+++ b/arch/arm/boot/dts/stm32mp151.dtsi
@@ -45,10 +45,10 @@
 
 	timer {
 		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
 		interrupt-parent = <&intc>;
 	};
 
@@ -455,6 +455,9 @@
 			interrupts-extended = <&exti 27 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&rcc USART2_K>;
 			wakeup-source;
+			dmas = <&dmamux1 43 0x400 0x15>,
+			       <&dmamux1 44 0x400 0x11>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -464,6 +467,9 @@
 			interrupts-extended = <&exti 28 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&rcc USART3_K>;
 			wakeup-source;
+			dmas = <&dmamux1 45 0x400 0x15>,
+			       <&dmamux1 46 0x400 0x11>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -473,6 +479,9 @@
 			interrupts-extended = <&exti 30 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&rcc UART4_K>;
 			wakeup-source;
+			dmas = <&dmamux1 63 0x400 0x15>,
+			       <&dmamux1 64 0x400 0x11>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -482,6 +491,9 @@
 			interrupts-extended = <&exti 31 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&rcc UART5_K>;
 			wakeup-source;
+			dmas = <&dmamux1 65 0x400 0x15>,
+			       <&dmamux1 66 0x400 0x11>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -588,6 +600,9 @@
 			interrupts-extended = <&exti 32 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&rcc UART7_K>;
 			wakeup-source;
+			dmas = <&dmamux1 79 0x400 0x15>,
+			       <&dmamux1 80 0x400 0x11>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -597,6 +612,9 @@
 			interrupts-extended = <&exti 33 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&rcc UART8_K>;
 			wakeup-source;
+			dmas = <&dmamux1 81 0x400 0x15>,
+			       <&dmamux1 82 0x400 0x11>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -678,6 +696,9 @@
 			interrupts-extended = <&exti 29 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&rcc USART6_K>;
 			wakeup-source;
+			dmas = <&dmamux1 71 0x400 0x15>,
+			       <&dmamux1 72 0x400 0x11>;
+			dma-names = "rx", "tx";
 			status = "disabled";
 		};
 
@@ -1059,7 +1080,7 @@
 		};
 
 		sdmmc3: mmc@48004000 {
-			compatible = "arm,pl18x", "arm,primecell";
+			compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
 			arm,primecell-periphid = <0x00253180>;
 			reg = <0x48004000 0x400>;
 			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
@@ -1381,7 +1402,7 @@
 		};
 
 		sdmmc1: mmc@58005000 {
-			compatible = "arm,pl18x", "arm,primecell";
+			compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
 			arm,primecell-periphid = <0x00253180>;
 			reg = <0x58005000 0x1000>;
 			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
@@ -1396,7 +1417,7 @@
 		};
 
 		sdmmc2: mmc@58007000 {
-			compatible = "arm,pl18x", "arm,primecell";
+			compatible = "st,stm32-sdmmc2", "arm,pl18x", "arm,primecell";
 			arm,primecell-periphid = <0x00253180>;
 			reg = <0x58007000 0x1000>;
 			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
@@ -1560,7 +1581,7 @@
 			reg = <0x5c004000 0x400>;
 			clocks = <&rcc RTCAPB>, <&rcc RTC>;
 			clock-names = "pclk", "rtc_ck";
-			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&exti 19 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/stm32mp153.dtsi b/arch/arm/boot/dts/stm32mp153.dtsi
index 1c1889b194cf..486084e0b80b 100644
--- a/arch/arm/boot/dts/stm32mp153.dtsi
+++ b/arch/arm/boot/dts/stm32mp153.dtsi
@@ -22,6 +22,13 @@
 		interrupt-affinity = <&cpu0>, <&cpu1>;
 	};
 
+	timer {
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
 	soc {
 		m_can1: can@4400e000 {
 			compatible = "bosch,m_can";
diff --git a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2.dts b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2.dts
index d3058a036c74..1f75f1d45181 100644
--- a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2.dts
+++ b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-ctouch2.dts
@@ -43,5 +43,7 @@
 	pinctrl-0 = <&uart4_pins_a>;
 	pinctrl-1 = <&uart4_sleep_pins_a>;
 	pinctrl-2 = <&uart4_idle_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts
index a797eaa917b7..ba92d7d8ed00 100644
--- a/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts
+++ b/arch/arm/boot/dts/stm32mp157a-icore-stm32mp1-edimm2.2.dts
@@ -128,5 +128,7 @@
 	pinctrl-0 = <&uart4_pins_a>;
 	pinctrl-1 = <&uart4_sleep_pins_a>;
 	pinctrl-2 = <&uart4_idle_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/stm32mp157a-iot-box.dts b/arch/arm/boot/dts/stm32mp157a-iot-box.dts
index 70f394b4d3c0..6a5a4af25bd9 100644
--- a/arch/arm/boot/dts/stm32mp157a-iot-box.dts
+++ b/arch/arm/boot/dts/stm32mp157a-iot-box.dts
@@ -58,6 +58,8 @@
 	/delete-property/st,hw-flow-ctrl;
 	cts-gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
 	rts-gpios = <&gpiob 0 GPIO_ACTIVE_LOW>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 
 	bluetooth {
diff --git a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts
index 5670b23812a2..fae656edd820 100644
--- a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts
+++ b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts
@@ -143,6 +143,8 @@
 	pinctrl-0 = <&uart4_pins_a>;
 	pinctrl-1 = <&uart4_sleep_pins_a>;
 	pinctrl-2 = <&uart4_idle_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
 
@@ -150,5 +152,7 @@
 &uart8 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart8_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0.dts b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0.dts
index 7a75868164dc..b9d0d3d6ad15 100644
--- a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0.dts
+++ b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0.dts
@@ -44,6 +44,8 @@
 	pinctrl-0 = <&uart4_pins_a>;
 	pinctrl-1 = <&uart4_sleep_pins_a>;
 	pinctrl-2 = <&uart4_idle_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
 
@@ -51,5 +53,7 @@
 &uart8 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart8_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi b/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi
index a4b14ef3caee..3a36f7fe0a2c 100644
--- a/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi
+++ b/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi
@@ -288,6 +288,8 @@
 	pinctrl-0 = <&usart2_pins_b>;
 	pinctrl-1 = <&usart2_sleep_pins_b>;
 	st,hw-flow-ctrl;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
 
@@ -296,6 +298,8 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart4_pins_c>;
 	st,hw-flow-ctrl;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
 
@@ -303,6 +307,8 @@
 &uart7 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart7_pins_b>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts
index 46b471d09c50..b1eb688a278a 100644
--- a/arch/arm/boot/dts/stm32mp157c-ed1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts
@@ -384,6 +384,8 @@
 	pinctrl-0 = <&uart4_pins_a>;
 	pinctrl-1 = <&uart4_sleep_pins_a>;
 	pinctrl-2 = <&uart4_idle_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/stm32mp157c-emsbc-argon.dts b/arch/arm/boot/dts/stm32mp157c-emsbc-argon.dts
new file mode 100644
index 000000000000..33b3f11d24bb
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157c-emsbc-argon.dts
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+//
+// Copyright (c) 2021 emtrion GmbH
+// Author: Reinhold Müller <reinhold.mueller@emtrion.de>.
+//
+
+/dts-v1/;
+
+#include "stm32mp157c-emstamp-argon.dtsi"
+
+/ {
+	model = "emtrion STM32MP157C emSBC-Argon Developer Board";
+	compatible = "emtrion,stm32mp157c-emsbc-argon", "emtrion,stm32mp157c-emstamp-argon",
+			"st,stm32mp157";
+
+	led: gpio_leds {
+		compatible = "gpio-leds";
+		led-2 {
+			label = "red";
+			gpios = <&gpiof 12 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+			default-state = "off";
+		};
+		led-3 {
+			label = "green";
+			gpios = <&gpioe 7 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+			default-state = "off";
+		};
+	};
+};
+
+&dac {
+	status = "okay";
+};
+
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+	cd-gpios = <&gpiob 7 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+	disable-wp;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&vdd_sd>;
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi b/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi
new file mode 100644
index 000000000000..33ae5e0590df
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi
@@ -0,0 +1,552 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+//
+// Copyright (c) 2021 emtrion GmbH
+// Author: Reinhold Müller <reinhold.mueller@emtrion.de>.
+//
+
+#include "stm32mp157.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/st,stpmic1.h>
+
+/ {
+	aliases {
+		ethernet0 = &ethernet0;
+		serial0 = &uart4;
+		serial1 = &usart2;
+		serial2 = &usart3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@c0000000 {
+		device_type = "memory";
+		reg = <0xc0000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mcuram2: mcuram2@10000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10000000 0x40000>;
+			no-map;
+		};
+
+		vdev0vring0: vdev0vring0@10040000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10040000 0x2000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@10042000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10042000 0x2000>;
+			no-map;
+		};
+
+		vdev0buffer: vdev0buffer@10044000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10044000 0x4000>;
+			no-map;
+		};
+
+		mcuram: mcuram@30000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x30000000 0x40000>;
+			no-map;
+		};
+
+		retram: retram@38000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x38000000 0x10000>;
+			no-map;
+		};
+
+		gpu_reserved: gpu@dc000000 {
+			reg = <0xdc000000 0x4000000>;
+			no-map;
+		};
+	};
+
+	led: gpio_leds {
+		compatible = "gpio-leds";
+		led-0 {
+			label = "panic";
+			gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+			default-state = "off";
+			panic-indicator;
+		};
+		led-1 {
+			label = "heartbeat";
+			gpios = <&gpioa 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+			default-state = "on";
+		};
+	};
+};
+
+&adc {
+	vdd-supply = <&vdd>;
+	vdda-supply = <&vdd>;
+	vref-supply = <&vrefbuf>;
+	status = "okay";
+
+	adc1: adc@0 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&adc1_in6_pins_a>;
+		st,min-sample-time-nsecs = <5000>;
+		st,adc-channels = <6>;
+		status = "disabled";
+	};
+
+	adc2: adc@100 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		channel@12 {
+			reg = <12>;
+			label = "sense_temp";
+			st,min-sample-time-ns = <9000>;
+		};
+		channel@15 {
+			reg = <15>;
+			label = "vbat";
+			st,min-sample-time-ns = <9000>;
+		};
+		channel@16 {
+			reg = <16>;
+			label = "dac_out1";
+			st,min-sample-time-ns = <9000>;
+		};
+		channel@17 {
+			reg = <17>;
+			label = "dac_out1";
+			st,min-sample-time-ns = <9000>;
+		};
+	};
+};
+
+&crc1 {
+	status = "okay";
+};
+
+&cryp1 {
+	status = "okay";
+};
+
+&dac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dac_ch1_pins_a &dac_ch2_pins_a>;
+	vref-supply = <&vdda>;
+	status = "disabled";
+
+	dac1: dac@1 {
+		status = "okay";
+	};
+	dac2: dac@2 {
+		status = "okay";
+	};
+};
+
+&dts {
+	status = "okay";
+};
+
+&ethernet0 {
+	status = "okay";
+	snps,reset-gpio = <&gpioa 1 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 30000 50000>;
+	pinctrl-0 = <&ethernet0_rmii_pins_b>;
+	pinctrl-1 = <&ethernet0_rmii_sleep_pins_b>;
+	pinctrl-names = "default", "sleep";
+	phy-mode = "rmii";
+	max-speed = <100>;
+	phy-handle = <&phy0>;
+	st,eth-ref-clk-sel;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
+&gpu {
+	contiguous-area = <&gpu_reserved>;
+};
+
+&hash1 {
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c1_pins_a>;
+	pinctrl-1 = <&i2c1_sleep_pins_a>;
+	i2c-scl-rising-time-ns = <100>;
+	i2c-scl-falling-time-ns = <7>;
+	status = "disabled";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+};
+
+&i2c4 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c4_pins_a>;
+	pinctrl-1 = <&i2c4_sleep_pins_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	pmic: stpmic@33 {
+		compatible = "st,stpmic1";
+		reg = <0x33>;
+		interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		status = "okay";
+
+		regulators {
+			compatible = "st,stpmic1-regulators";
+
+			ldo1-supply = <&v3v3>;
+			ldo3-supply = <&vdd_ddr>;
+			ldo6-supply = <&v3v3>;
+			pwr_sw1-supply = <&bst_out>;
+			pwr_sw2-supply = <&bst_out>;
+
+			vddcore: buck1 {
+				regulator-name = "vddcore";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd_ddr: buck2 {
+				regulator-name = "vdd_ddr";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd: buck3 {
+				regulator-name = "vdd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				st,mask-reset;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			v3v3: buck4 {
+				regulator-name = "v3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+				regulator-initial-mode = <0>;
+			};
+
+			v1v8_audio: ldo1 {
+				regulator-name = "v1v8_audio";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO1 0>;
+			};
+
+			v3v3_hdmi: ldo2 {
+				regulator-name = "v3v3_hdmi";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO2 0>;
+			};
+
+			vtt_ddr: ldo3 {
+				regulator-name = "vtt_ddr";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <750000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+			};
+
+			vdd_usb: ldo4 {
+				regulator-name = "vdd_usb";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				interrupts = <IT_CURLIM_LDO4 0>;
+			};
+
+			vdd_sd: ldo5 {
+				regulator-name = "vdd_sd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				interrupts = <IT_CURLIM_LDO5 0>;
+				regulator-always-on;
+			};
+
+			vdda: ldo6 {
+				regulator-name = "vdda";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO6 0>;
+				regulator-boot-on;
+			};
+
+			vref_ddr: vref_ddr {
+				regulator-name = "vref_ddr";
+				regulator-always-on;
+				regulator-over-current-protection;
+			};
+
+			bst_out: boost {
+				regulator-name = "bst_out";
+				interrupts = <IT_OCP_BOOST 0>;
+			};
+
+			vbus_otg: pwr_sw1 {
+				regulator-name = "vbus_otg";
+				interrupts = <IT_OCP_OTG 0>;
+				regulator-active-discharge;
+			};
+
+			vbus_usbh: pwr_sw2 {
+				regulator-name = "usbh_vbus";
+				interrupts = <IT_OCP_SWOUT 0>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+
+		onkey {
+			compatible = "st,stpmic1-onkey";
+			interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 1>;
+			interrupt-names = "onkey-falling", "onkey-rising";
+			status = "okay";
+		};
+
+		watchdog {
+			compatible = "st,stpmic1-wdt";
+			status = "disabled";
+		};
+	};
+};
+
+&i2c5 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c5_pins_a>;
+	pinctrl-1 = <&i2c5_sleep_pins_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
+};
+
+&ipcc {
+	status = "okay";
+};
+
+&iwdg2 {
+	timeout-sec = <32>;
+	status = "okay";
+};
+
+&m4_rproc {
+	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
+			<&vdev0vring1>, <&vdev0buffer>;
+	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
+	mbox-names = "vq0", "vq1", "shutdown";
+	interrupt-parent = <&exti>;
+	interrupts = <68 1>;
+	interrupt-names = "wdg";
+	recovery;
+	status = "okay";
+};
+
+&pwr_regulators {
+	vdd-supply = <&vdd>;
+	vdd_3v3_usbfs-supply = <&vdd_usb>;
+};
+
+&qspi {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>;
+	pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>;
+	reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	flash0: is25lp016d@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <133000000>;
+		spi-rx-bus-width = <1>;
+		spi-tx-bus-width = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&rng1 {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sdmmc2 {
+	arm,primecell-periphid = <0x10153180>;
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc2_b4_pins_b>;
+	pinctrl-1 = <&sdmmc2_b4_od_pins_b>;
+	pinctrl-2 = <&sdmmc2_b4_sleep_pins_a>;
+	non-removable;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&v3v3>;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins_a>;
+	cs-gpios = <&gpioz 3 0>;
+	status = "disabled";
+
+	spidev@0  {
+		compatible = "spidev";
+		reg = <0>;
+		spi-max-frequency = <100000>;
+	};
+};
+
+&timers1 {
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	pwm {
+		pinctrl-0 = <&pwm1_pins_b>;
+		pinctrl-1 = <&pwm1_sleep_pins_b>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@0 {
+		status = "okay";
+	};
+};
+
+&timers4 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	pwm {
+		pinctrl-0 = <&pwm4_pins_b>;
+		pinctrl-1 = <&pwm4_sleep_pins_b>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@3 {
+		status = "okay";
+	};
+};
+
+&timers5 {
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	pwm {
+		pinctrl-0 = <&pwm5_pins_a>;
+		pinctrl-1 = <&pwm5_sleep_pins_a>;
+		pinctrl-names = "default", "sleep";
+		status = "okay";
+	};
+	timer@4 {
+		status = "okay";
+	};
+};
+
+&uart4 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&uart4_pins_a>;
+	pinctrl-1 = <&uart4_sleep_pins_a>;
+	pinctrl-2 = <&uart4_idle_pins_a>;
+	status = "okay";
+};
+
+&usart2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&usart2_pins_a>;
+	pinctrl-1 = <&usart2_sleep_pins_a>;
+	status = "okay";
+};
+
+&usart3 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&usart3_pins_d>;
+	pinctrl-1 = <&usart3_sleep_pins_d>;
+	pinctrl-2 = <&usart3_idle_pins_d>;
+	status = "okay";
+};
+
+&usbh_ehci {
+	phys = <&usbphyc_port0>;
+	phy-names = "usb";
+	status = "okay";
+};
+
+&usbh_ohci {
+	phys = <&usbphyc_port0>;
+	phy-names = "usb";
+	status = "okay";
+};
+
+&usbotg_hs {
+	dr_mode = "peripheral";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usbotg_hs_pins_a>;
+	phy-names = "usb2-phy";
+	phys = <&usbphyc_port1 0>;
+	vbus-supply = <&vbus_otg>;
+	status = "okay";
+};
+
+&usbphyc {
+	status = "okay";
+};
+
+&usbphyc_port0 {
+	phy-supply = <&vdd_usb>;
+};
+
+&usbphyc_port1 {
+	phy-supply = <&vdd_usb>;
+};
+
+&vrefbuf {
+	regulator-min-microvolt = <2500000>;
+	regulator-max-microvolt = <2500000>;
+	vdda-supply = <&vdd>;
+	status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts
index 1e9bf7eea0f1..e8d2ec41d537 100644
--- a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts
@@ -248,5 +248,7 @@
 &uart4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart4_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/stm32mp157c-odyssey.dts b/arch/arm/boot/dts/stm32mp157c-odyssey.dts
index 554f5d3bcdc3..ed66d25b8bf3 100644
--- a/arch/arm/boot/dts/stm32mp157c-odyssey.dts
+++ b/arch/arm/boot/dts/stm32mp157c-odyssey.dts
@@ -81,6 +81,8 @@
 &uart4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart4_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi
index 4b10b013ffd5..35b1034aa3cf 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi
@@ -131,6 +131,8 @@
 &usart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&usart3_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
 
@@ -144,6 +146,8 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart8_pins_a>;
 	rts-gpios = <&gpioe 6 GPIO_ACTIVE_HIGH>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
index fbf3826933e4..5f586f024060 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
@@ -287,6 +287,8 @@
 &usart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&usart3_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
 
@@ -294,6 +296,8 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart8_pins_a &uart8_rtscts_pins_a>;
 	uart-has-rtscts;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi
index ba816ef8b9b2..abc595350e71 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-picoitx.dtsi
@@ -105,12 +105,16 @@
 &usart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&usart3_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
 
 &uart8 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart8_pins_a &uart8_rtscts_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
index 8c41f819f776..83e2c87713f8 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
@@ -196,7 +196,6 @@
 			  "", "", "DHCOM-E", "",
 			  "", "", "", "",
 			  "", "", "", "";
-	status = "okay";
 };
 
 &gpiod {
@@ -521,5 +520,7 @@
 &uart4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart4_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
index 6885948f3024..61e17f44ce81 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
@@ -376,6 +376,8 @@
 	label = "LS-UART1";
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart4_pins_b>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
 
@@ -385,6 +387,8 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart7_pins_a>;
 	uart-has-rtscts;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
 
@@ -394,6 +398,8 @@
 	pinctrl-0 = <&usart2_pins_a>;
 	pinctrl-1 = <&usart2_sleep_pins_a>;
 	st,hw-flow-ctrl;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 
 	bluetooth {
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi
index 44ecc4708587..6336c3ca0f0e 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi
@@ -19,6 +19,48 @@
 		device_type = "memory";
 		reg = <0xc0000000 0x40000000>;
 	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mcuram2: mcuram2@10000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10000000 0x40000>;
+			no-map;
+		};
+
+		vdev0vring0: vdev0vring0@10040000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10040000 0x1000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@10041000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10041000 0x1000>;
+			no-map;
+		};
+
+		vdev0buffer: vdev0buffer@10042000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10042000 0x4000>;
+			no-map;
+		};
+
+		mcuram: mcuram@30000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x30000000 0x40000>;
+			no-map;
+		};
+
+		retram: retram@38000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x38000000 0x10000>;
+			no-map;
+		};
+	};
 };
 
 &crc1 {
@@ -179,11 +221,25 @@
 	};
 };
 
+&ipcc {
+	status = "okay";
+};
+
 &iwdg2 {
 	timeout-sec = <32>;
 	status = "okay";
 };
 
+&m4_rproc {
+	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
+			<&vdev0vring1>, <&vdev0buffer>;
+	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
+	mbox-names = "vq0", "vq1", "shutdown";
+	interrupt-parent = <&exti>;
+	interrupts = <68 1>;
+	status = "okay";
+};
+
 &pwr_regulators {
 	vdd-supply = <&vdd>;
 	vdd_3v3_usbfs-supply = <&vdd_usb>;
diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
index 6caeb448c190..333c2af97130 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
@@ -650,6 +650,8 @@
 	pinctrl-0 = <&uart4_pins_a>;
 	pinctrl-1 = <&uart4_sleep_pins_a>;
 	pinctrl-2 = <&uart4_idle_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
 
@@ -658,6 +660,8 @@
 	pinctrl-0 = <&uart7_pins_c>;
 	pinctrl-1 = <&uart7_sleep_pins_c>;
 	pinctrl-2 = <&uart7_idle_pins_c>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "disabled";
 };
 
diff --git a/arch/arm/boot/dts/sun7i-a20-haoyu-marsboard.dts b/arch/arm/boot/dts/sun7i-a20-haoyu-marsboard.dts
new file mode 100644
index 000000000000..097e479c2772
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-haoyu-marsboard.dts
@@ -0,0 +1,182 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 Conley Lee
+ * Conley Lee <conleylee@foxmail.com>
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "HAOYU Electronics Marsboard A20";
+	compatible = "haoyu,a20-marsboard", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&codec {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_mii_pins>, <&gmac_txerr>;
+	phy-handle = <&phy0>;
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
+	status = "okay";
+};
+
+&gmac_mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&otg_sram {
+	status = "okay";
+};
+
+&pio {
+	gmac_txerr: gmac-txerr-pin {
+		pins = "PA17";
+		function = "gmac";
+	};
+};
+
+&reg_ahci_5v {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&ac_power_supply {
+	status = "okay";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1450000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
index be49eabbff94..cd3df12b6573 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
@@ -103,12 +103,40 @@
 	};
 };
 
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pa_pins>;
 	status = "okay";
 };
 
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>, <&uart3_rts_cts_pins>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rtc 1>;
+		clock-names = "lpo";
+		vbat-supply = <&reg_vcc3v3>;
+		vddio-supply = <&reg_vcc3v3>;
+		device-wakeup-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
+		host-wakeup-gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */
+		shutdown-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+	};
+};
+
 &usbphy {
 	/* USB VBUS is always on */
 	status = "okay";
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts
index 9f33f6fae595..df71fab3cf4e 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts
@@ -45,6 +45,10 @@
 / {
 	model = "FriendlyARM NanoPi NEO";
 	compatible = "friendlyarm,nanopi-neo", "allwinner,sun8i-h3";
+
+	aliases {
+		ethernet0 = &emac;
+	};
 };
 
 &ehci0 {
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index 845f25235407..eac2349a2380 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -245,7 +245,7 @@
 		cpu_thermal: cpu-thermal {
 			polling-delay-passive = <0>;
 			polling-delay = <0>;
-			thermal-sensors = <&ths 0>;
+			thermal-sensors = <&ths>;
 
 			trips {
 				cpu_hot_trip: cpu-hot {
diff --git a/arch/arm/boot/dts/sun8i-v3s.dtsi b/arch/arm/boot/dts/sun8i-v3s.dtsi
index b30bc1a25ebb..084323d5c61c 100644
--- a/arch/arm/boot/dts/sun8i-v3s.dtsi
+++ b/arch/arm/boot/dts/sun8i-v3s.dtsi
@@ -593,6 +593,17 @@
 			#size-cells = <0>;
 		};
 
+		gic: interrupt-controller@1c81000 {
+			compatible = "arm,gic-400";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x2000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
 		csi1: camera@1cb4000 {
 			compatible = "allwinner,sun8i-v3s-csi";
 			reg = <0x01cb4000 0x3000>;
@@ -604,16 +615,5 @@
 			resets = <&ccu RST_BUS_CSI>;
 			status = "disabled";
 		};
-
-		gic: interrupt-controller@1c81000 {
-			compatible = "arm,gic-400";
-			reg = <0x01c81000 0x1000>,
-			      <0x01c82000 0x2000>,
-			      <0x01c84000 0x2000>,
-			      <0x01c86000 0x2000>;
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-		};
 	};
 };
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index 4aeca9e7e30d..d7e9f977f986 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -913,6 +913,19 @@
 			#size-cells = <0>;
 		};
 
+		r_uart: serial@1f02800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01f02800 0x400>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&r_ccu CLK_APB0_UART>;
+			resets = <&r_ccu RST_APB0_UART>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_uart_pins>;
+			status = "disabled";
+		};
+
 		r_pio: pinctrl@1f02c00 {
 			compatible = "allwinner,sun8i-h3-r-pinctrl";
 			reg = <0x01f02c00 0x400>;
@@ -939,6 +952,11 @@
 				pins = "PL10";
 				function = "s_pwm";
 			};
+
+			r_uart_pins: r-uart-pins {
+				pins = "PL2", "PL3";
+				function = "s_uart";
+			};
 		};
 
 		r_pwm: pwm@1f03800 {
diff --git a/arch/arm/boot/dts/tegra124-nyan-big-fhd.dts b/arch/arm/boot/dts/tegra124-nyan-big-fhd.dts
index d35fb79d2f51..4db43324dafa 100644
--- a/arch/arm/boot/dts/tegra124-nyan-big-fhd.dts
+++ b/arch/arm/boot/dts/tegra124-nyan-big-fhd.dts
@@ -5,7 +5,13 @@
 
 / {
 	/* Version of Nyan Big with 1080p panel */
-	panel {
-		compatible = "auo,b133htn01";
+	host1x@50000000 {
+		dpaux@545c0000 {
+			aux-bus {
+				panel: panel {
+					compatible = "auo,b133htn01";
+				};
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/tegra124-nyan-big.dts b/arch/arm/boot/dts/tegra124-nyan-big.dts
index 1d2aac2cb6d0..fdc1d64dfff9 100644
--- a/arch/arm/boot/dts/tegra124-nyan-big.dts
+++ b/arch/arm/boot/dts/tegra124-nyan-big.dts
@@ -13,12 +13,15 @@
 		     "google,nyan-big-rev1", "google,nyan-big-rev0",
 		     "google,nyan-big", "google,nyan", "nvidia,tegra124";
 
-	panel: panel {
-		compatible = "auo,b133xtn01";
-
-		power-supply = <&vdd_3v3_panel>;
-		backlight = <&backlight>;
-		ddc-i2c-bus = <&dpaux>;
+	host1x@50000000 {
+		dpaux@545c0000 {
+			aux-bus {
+				panel: panel {
+					compatible = "auo,b133xtn01";
+					backlight = <&backlight>;
+				};
+			};
+		};
 	};
 
 	mmc@700b0400 { /* SD Card on this bus */
diff --git a/arch/arm/boot/dts/tegra124-nyan-blaze.dts b/arch/arm/boot/dts/tegra124-nyan-blaze.dts
index 677babde6460..abdf4456826f 100644
--- a/arch/arm/boot/dts/tegra124-nyan-blaze.dts
+++ b/arch/arm/boot/dts/tegra124-nyan-blaze.dts
@@ -15,12 +15,15 @@
 		     "google,nyan-blaze-rev0", "google,nyan-blaze",
 		     "google,nyan", "nvidia,tegra124";
 
-	panel: panel {
-		compatible = "samsung,ltn140at29-301";
-
-		power-supply = <&vdd_3v3_panel>;
-		backlight = <&backlight>;
-		ddc-i2c-bus = <&dpaux>;
+	host1x@50000000 {
+		dpaux@545c0000 {
+			aux-bus {
+				panel: panel {
+					compatible = "samsung,ltn140at29-301";
+					backlight = <&backlight>;
+				};
+			};
+		};
 	};
 
 	sound {
diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts
index 232c90604df9..6a9592ceb5f2 100644
--- a/arch/arm/boot/dts/tegra124-venice2.dts
+++ b/arch/arm/boot/dts/tegra124-venice2.dts
@@ -48,6 +48,13 @@
 		dpaux@545c0000 {
 			vdd-supply = <&vdd_3v3_panel>;
 			status = "okay";
+
+			aux-bus {
+				panel: panel {
+					compatible = "lg,lp129qe";
+					backlight = <&backlight>;
+				};
+			};
 		};
 	};
 
@@ -1080,13 +1087,6 @@
 		};
 	};
 
-	panel: panel {
-		compatible = "lg,lp129qe";
-		power-supply = <&vdd_3v3_panel>;
-		backlight = <&backlight>;
-		ddc-i2c-bus = <&dpaux>;
-	};
-
 	vdd_mux: regulator-mux {
 		compatible = "regulator-fixed";
 		regulator-name = "+VDD_MUX";
diff --git a/arch/arm/boot/dts/tegra20-asus-tf101.dts b/arch/arm/boot/dts/tegra20-asus-tf101.dts
index 020172ee7340..a054d39db466 100644
--- a/arch/arm/boot/dts/tegra20-asus-tf101.dts
+++ b/arch/arm/boot/dts/tegra20-asus-tf101.dts
@@ -436,17 +436,27 @@
 		};
 	};
 
+	spdif@70002400 {
+		status = "okay";
+
+		nvidia,fixed-parent-rate;
+	};
+
 	i2s@70002800 {
 		status = "okay";
+
+		nvidia,fixed-parent-rate;
 	};
 
 	serial@70006040 {
 		compatible = "nvidia,tegra20-hsuart";
+		/delete-property/ reg-shift;
 		/* GPS BCM4751 */
 	};
 
 	serial@70006200 {
 		compatible = "nvidia,tegra20-hsuart";
+		/delete-property/ reg-shift;
 		status = "okay";
 
 		/* Azurewave AW-NH615 BCM4329B1 */
@@ -756,7 +766,7 @@
 
 			lpddr2 {
 				compatible = "elpida,B8132B2PB-6D-F", "jedec,lpddr2-s4";
-				revision-id1 = <1>;
+				revision-id = <1 0>;
 				density = <2048>;
 				io-width = <16>;
 			};
diff --git a/arch/arm/boot/dts/tegra20-colibri.dtsi b/arch/arm/boot/dts/tegra20-colibri.dtsi
index 1eefb9ee4ac8..8ebd8afc857d 100644
--- a/arch/arm/boot/dts/tegra20-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra20-colibri.dtsi
@@ -691,7 +691,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		asix@1 {
+		ethernet@1 {
 			compatible = "usbb95,772b";
 			reg = <1>;
 			local-mac-address = [00 00 00 00 00 00];
diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts
index d53a175dc17a..0fb4b1f5bc1c 100644
--- a/arch/arm/boot/dts/tegra20-paz00.dts
+++ b/arch/arm/boot/dts/tegra20-paz00.dts
@@ -13,6 +13,8 @@
 	compatible = "compal,paz00", "nvidia,tegra20";
 
 	aliases {
+		mmc0 = &sdmmc4; /* eMMC */
+		mmc1 = &sdmmc1; /* MicroSD */
 		rtc0 = "/i2c@7000d000/tps6586x@34";
 		rtc1 = "/rtc@7000e000";
 		serial0 = &uarta;
@@ -558,7 +560,7 @@
 		status = "okay";
 	};
 
-	mmc@c8000000 {
+	sdmmc1: mmc@c8000000 {
 		status = "okay";
 		cd-gpios = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_LOW>;
 		wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
@@ -566,7 +568,7 @@
 		bus-width = <4>;
 	};
 
-	mmc@c8000600 {
+	sdmmc4: mmc@c8000600 {
 		status = "okay";
 		bus-width = <8>;
 		non-removable;
diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi
index de39c5465c0a..0e19bd0a847c 100644
--- a/arch/arm/boot/dts/tegra20-tamonten.dtsi
+++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi
@@ -183,8 +183,8 @@
 			};
 			conf_ata {
 				nvidia,pins = "ata", "atb", "atc", "atd", "ate",
-					"cdev1", "cdev2", "dap1", "dtb", "gma",
-					"gmb", "gmc", "gmd", "gme", "gpu7",
+					"cdev1", "cdev2", "dap1", "dtb", "dtf",
+					"gma", "gmb", "gmc", "gmd", "gme", "gpu7",
 					"gpv", "i2cp", "irrx", "irtx", "pta",
 					"rm", "slxa", "slxk", "spia", "spib",
 					"uac";
@@ -203,7 +203,7 @@
 			};
 			conf_crtp {
 				nvidia,pins = "crtp", "dap2", "dap3", "dap4",
-					"dtc", "dte", "dtf", "gpu", "sdio1",
+					"dtc", "dte", "gpu", "sdio1",
 					"slxc", "slxd", "spdi", "spdo", "spig",
 					"uda";
 				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
diff --git a/arch/arm/boot/dts/tegra30-asus-tf700t.dts b/arch/arm/boot/dts/tegra30-asus-tf700t.dts
index 18a9bfa5e97b..1a331dec3cfe 100644
--- a/arch/arm/boot/dts/tegra30-asus-tf700t.dts
+++ b/arch/arm/boot/dts/tegra30-asus-tf700t.dts
@@ -742,7 +742,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			dsi-bridge@7 {
+			dsi@7 {
 				compatible = "toshiba,tc358768";
 				reg = <0x7>;
 
diff --git a/arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi b/arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi
index 85b43a86a26d..c662ab261ed5 100644
--- a/arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi
+++ b/arch/arm/boot/dts/tegra30-asus-transformer-common.dtsi
@@ -1080,6 +1080,7 @@
 
 	serial@70006040 {
 		compatible = "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
 		status = "okay";
 
 		/* Broadcom GPS BCM47511 */
@@ -1087,6 +1088,7 @@
 
 	serial@70006200 {
 		compatible = "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
 		status = "okay";
 
 		nvidia,adjust-baud-rates = <0 9600 100>,
diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi
index be691a1c33a1..22231d450b1b 100644
--- a/arch/arm/boot/dts/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
@@ -960,7 +960,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		asix@1 {
+		ethernet@1 {
 			compatible = "usbb95,772b";
 			reg = <1>;
 			local-mac-address = [00 00 00 00 00 00];
diff --git a/arch/arm/boot/dts/tegra30-ouya.dts b/arch/arm/boot/dts/tegra30-ouya.dts
index a5cfbab5f565..e58dda4f9d2c 100644
--- a/arch/arm/boot/dts/tegra30-ouya.dts
+++ b/arch/arm/boot/dts/tegra30-ouya.dts
@@ -4553,7 +4553,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		smsc@2 { /* SMSC 10/100T Ethernet Controller */
+		ethernet@2 { /* SMSC 10/100T Ethernet Controller */
 			compatible = "usb424,9e00";
 			reg = <2>;
 			local-mac-address = [00 11 22 33 44 55];
diff --git a/arch/arm/boot/dts/tegra30-pegatron-chagall.dts b/arch/arm/boot/dts/tegra30-pegatron-chagall.dts
index f4b2d4218849..8ce61035290b 100644
--- a/arch/arm/boot/dts/tegra30-pegatron-chagall.dts
+++ b/arch/arm/boot/dts/tegra30-pegatron-chagall.dts
@@ -1103,6 +1103,7 @@
 
 	uartb: serial@70006040 {
 		compatible = "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
 		status = "okay";
 
 		/* Broadcom GPS BCM47511 */
@@ -1110,6 +1111,7 @@
 
 	uartc: serial@70006200 {
 		compatible = "nvidia,tegra30-hsuart";
+		/delete-property/ reg-shift;
 		status = "okay";
 
 		nvidia,adjust-baud-rates = <0 9600 100>,
diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
index c12a1b8bc086..14c411f146f5 100644
--- a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
@@ -103,7 +103,7 @@
 	status = "okay";
 
 	/* M41T0M6 real time clock on carrier board */
-	rtc: m41t0m6@68 {
+	rtc: rtc@68 {
 		compatible = "st,m41t0";
 		reg = <0x68>;
 	};
diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index e849367c0566..b58d45a03607 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -258,7 +258,6 @@ CONFIG_MINIX_FS=m
 CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ASCII=m
 CONFIG_NLS_ISO8859_1=y
diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig
index cae09010a799..aa061074db78 100644
--- a/arch/arm/configs/exynos_defconfig
+++ b/arch/arm/configs/exynos_defconfig
@@ -158,6 +158,7 @@ CONFIG_CHARGER_MAX14577=y
 CONFIG_CHARGER_MAX77693=y
 CONFIG_CHARGER_MAX8997=y
 CONFIG_CHARGER_MAX8998=y
+CONFIG_CHARGER_SMB347=y
 CONFIG_CHARGER_TPS65090=y
 CONFIG_SENSORS_LM90=y
 CONFIG_SENSORS_NTC_THERMISTOR=y
diff --git a/arch/arm/configs/ezx_defconfig b/arch/arm/configs/ezx_defconfig
index ec84d80096b1..0788a892e160 100644
--- a/arch/arm/configs/ezx_defconfig
+++ b/arch/arm/configs/ezx_defconfig
@@ -309,7 +309,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
 CONFIG_SMB_FS=m
 CONFIG_CIFS=m
diff --git a/arch/arm/configs/imote2_defconfig b/arch/arm/configs/imote2_defconfig
index 6db871d4e077..015b7ef237de 100644
--- a/arch/arm/configs/imote2_defconfig
+++ b/arch/arm/configs/imote2_defconfig
@@ -283,7 +283,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
 CONFIG_SMB_FS=m
 CONFIG_CIFS=m
diff --git a/arch/arm/configs/imxrt_defconfig b/arch/arm/configs/imxrt_defconfig
new file mode 100644
index 000000000000..52dba3762996
--- /dev/null
+++ b/arch/arm/configs/imxrt_defconfig
@@ -0,0 +1,35 @@
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_BPF_SYSCALL=y
+CONFIG_SCHED_AUTOGROUP=y
+# CONFIG_MMU is not set
+CONFIG_ARCH_MXC=y
+CONFIG_SOC_IMXRT=y
+CONFIG_SET_MEM_PARAM=y
+CONFIG_DRAM_BASE=0x80000000
+CONFIG_DRAM_SIZE=0x02000000
+CONFIG_BINFMT_FLAT=y
+CONFIG_UEVENT_HELPER=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_IMX_WEIM=y
+CONFIG_LEGACY_PTY_COUNT=2
+CONFIG_SERIAL_FSL_LPUART=y
+CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
+CONFIG_SERIAL_DEV_BUS=y
+CONFIG_PINCTRL_IMXRT1050=y
+CONFIG_GPIO_MXC=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_ESDHC_IMX=y
+CONFIG_DMADEVICES=y
+CONFIG_FSL_EDMA=y
+CONFIG_CLK_IMXRT1050=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_UTF8=y
+CONFIG_EXFAT_FS=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_UTF8=y
diff --git a/arch/arm/configs/integrator_defconfig b/arch/arm/configs/integrator_defconfig
index 4dfe321a79f6..5b485722ccf9 100644
--- a/arch/arm/configs/integrator_defconfig
+++ b/arch/arm/configs/integrator_defconfig
@@ -79,7 +79,6 @@ CONFIG_CRAMFS=y
 CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_MAGIC_SYSRQ=y
diff --git a/arch/arm/configs/iop32x_defconfig b/arch/arm/configs/iop32x_defconfig
index 18a21faa834c..de2cc6759cae 100644
--- a/arch/arm/configs/iop32x_defconfig
+++ b/arch/arm/configs/iop32x_defconfig
@@ -94,7 +94,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
diff --git a/arch/arm/configs/keystone_defconfig b/arch/arm/configs/keystone_defconfig
index 33c917df7b32..b1bcb858216b 100644
--- a/arch/arm/configs/keystone_defconfig
+++ b/arch/arm/configs/keystone_defconfig
@@ -213,7 +213,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
diff --git a/arch/arm/configs/lart_defconfig b/arch/arm/configs/lart_defconfig
index b6ddb9884326..2dfa33d7dca3 100644
--- a/arch/arm/configs/lart_defconfig
+++ b/arch/arm/configs/lart_defconfig
@@ -59,7 +59,6 @@ CONFIG_CRAMFS=m
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
 CONFIG_NLS=y
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_850=m
diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig
index fe8d760256a4..70241ad2b550 100644
--- a/arch/arm/configs/multi_v5_defconfig
+++ b/arch/arm/configs/multi_v5_defconfig
@@ -24,11 +24,6 @@ CONFIG_MACH_DM355_LEOPARD=y
 CONFIG_MACH_MITYOMAPL138=y
 CONFIG_MACH_OMAPL138_HAWKBOARD=y
 CONFIG_ARCH_MXC=y
-CONFIG_MACH_MX21ADS=y
-CONFIG_MACH_MX27ADS=y
-CONFIG_MACH_MX27_3DS=y
-CONFIG_MACH_IMX27_VISSTRIM_M10=y
-CONFIG_MACH_PCA100=y
 CONFIG_SOC_IMX25=y
 CONFIG_SOC_IMX27=y
 CONFIG_ARCH_MVEBU=y
@@ -57,11 +52,9 @@ CONFIG_MACH_WNR854T=y
 CONFIG_MACH_RD88F5181L_GE=y
 CONFIG_MACH_RD88F5181L_FXO=y
 CONFIG_MACH_RD88F6183AP_GE=y
-CONFIG_ARCH_U300=y
+CONFIG_ARCH_SUNXI=y
 CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_CPU_FREQ=y
@@ -85,6 +78,8 @@ CONFIG_NET_PKTGEN=m
 CONFIG_CFG80211=y
 CONFIG_MAC80211=y
 CONFIG_PCI_MVEBU=y
+CONFIG_ARCH_VERSATILE=y
+CONFIG_PCI_VERSATILE=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_IMX_WEIM=y
@@ -111,6 +106,9 @@ CONFIG_EEPROM_AT24=y
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
 CONFIG_BLK_DEV_SR=m
+CONFIG_VIRTIO_PCI=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_VIRTIO_BLK=y
 CONFIG_CHR_DEV_SG=m
 CONFIG_ATA=y
 CONFIG_SATA_AHCI=y
@@ -143,7 +141,10 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=6
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_ASPEED_VUART=m
+CONFIG_SERIAL_8250_DW=y
 CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
 CONFIG_SERIAL_ATMEL_TTYAT=y
@@ -159,11 +160,11 @@ CONFIG_I2C_ASPEED=m
 CONFIG_I2C_AT91=y
 CONFIG_I2C_IMX=y
 CONFIG_I2C_MV64XXX=y
-CONFIG_I2C_NOMADIK=y
 CONFIG_SPI=y
 CONFIG_SPI_ATMEL=y
 CONFIG_SPI_IMX=y
 CONFIG_SPI_ORION=y
+CONFIG_SPI_SUN6I=y
 CONFIG_GPIO_ASPEED=m
 CONFIG_GPIO_ASPEED_SGPIO=y
 CONFIG_GPIO_MXC=y
@@ -180,14 +181,15 @@ CONFIG_THERMAL=y
 CONFIG_KIRKWOOD_THERMAL=y
 CONFIG_AT91SAM9X_WATCHDOG=y
 CONFIG_ORION_WATCHDOG=y
+CONFIG_SUNXI_WATCHDOG=y
 CONFIG_NPCM7XX_WATCHDOG=y
 CONFIG_IMX2_WDT=y
 CONFIG_MFD_ATMEL_HLCDC=y
-# CONFIG_ABX500_CORE is not set
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_MEDIA_SUPPORT=y
 CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_PLATFORM_SUPPORT=y
 CONFIG_V4L_PLATFORM_DRIVERS=y
 CONFIG_VIDEO_ASPEED=m
 CONFIG_VIDEO_ATMEL_ISI=m
@@ -196,6 +198,7 @@ CONFIG_DRM_ATMEL_HLCDC=m
 CONFIG_DRM_PANEL_SIMPLE=y
 CONFIG_DRM_PANEL_EDP=y
 CONFIG_DRM_ASPEED_GFX=m
+CONFIG_FB=y
 CONFIG_FB_IMX=y
 CONFIG_FB_ATMEL=y
 CONFIG_BACKLIGHT_ATMEL_LCDC=y
@@ -249,6 +252,7 @@ CONFIG_MMC_SDHCI_PLTFM=m
 CONFIG_MMC_SDHCI_OF_ASPEED=m
 CONFIG_MMC_ATMELMCI=y
 CONFIG_MMC_MVSDIO=y
+CONFIG_MMC_SUNXI=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
@@ -303,8 +307,8 @@ CONFIG_CRYPTO_DEV_MARVELL_CESA=y
 CONFIG_CRC_CCITT=y
 CONFIG_LIBCRC32C=y
 CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_FS=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_PREEMPT is not set
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 8863fa969ede..6e0c8c19b35c 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -24,7 +24,9 @@ CONFIG_ARCH_BCM_NSP=y
 CONFIG_ARCH_BCM_5301X=y
 CONFIG_ARCH_BCM_281XX=y
 CONFIG_ARCH_BCM_21664=y
+CONFIG_ARCH_BCM_23550=y
 CONFIG_ARCH_BCM2835=y
+CONFIG_ARCH_BCM_53573=y
 CONFIG_ARCH_BCM_63XX=y
 CONFIG_ARCH_BRCMSTB=y
 CONFIG_ARCH_BERLIN=y
@@ -32,6 +34,7 @@ CONFIG_MACH_BERLIN_BG2=y
 CONFIG_MACH_BERLIN_BG2CD=y
 CONFIG_MACH_BERLIN_BG2Q=y
 CONFIG_ARCH_DIGICOLOR=y
+CONFIG_ARCH_AIROHA=y
 CONFIG_ARCH_EXYNOS=y
 CONFIG_ARCH_HIGHBANK=y
 CONFIG_ARCH_HISI=y
@@ -75,6 +78,7 @@ CONFIG_SOC_AM43XX=y
 CONFIG_SOC_DRA7XX=y
 CONFIG_ARCH_QCOM=y
 CONFIG_ARCH_MSM8X60=y
+CONFIG_ARCH_MSM8916=y
 CONFIG_ARCH_MSM8960=y
 CONFIG_ARCH_MSM8974=y
 CONFIG_ARCH_ROCKCHIP=y
@@ -109,11 +113,13 @@ CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
 CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
 CONFIG_CPUFREQ_DT=y
 CONFIG_ARM_IMX6Q_CPUFREQ=y
+CONFIG_ARM_QCOM_CPUFREQ_NVMEM=y
 CONFIG_ARM_RASPBERRYPI_CPUFREQ=y
 CONFIG_ARM_SCMI_CPUFREQ=y
 CONFIG_QORIQ_CPUFREQ=y
 CONFIG_CPU_IDLE=y
 CONFIG_ARM_CPUIDLE=y
+CONFIG_ARM_PSCI_CPUIDLE=y
 CONFIG_ARM_ZYNQ_CPUIDLE=y
 CONFIG_ARM_EXYNOS_CPUIDLE=y
 CONFIG_ARM_TEGRA_CPUIDLE=y
@@ -157,6 +163,8 @@ CONFIG_IPV6_MIP6=m
 CONFIG_IPV6_TUNNEL=m
 CONFIG_IPV6_MULTIPLE_TABLES=y
 CONFIG_NET_DSA=m
+CONFIG_QRTR=m
+CONFIG_QRTR_SMD=m
 CONFIG_CAN=y
 CONFIG_CAN_AT91=m
 CONFIG_CAN_FLEXCAN=m
@@ -169,6 +177,7 @@ CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_BCM=y
 CONFIG_BT_MRVL=m
 CONFIG_BT_MRVL_SDIO=m
+CONFIG_BT_QCOMSMD=m
 CONFIG_CFG80211=m
 CONFIG_MAC80211=m
 CONFIG_RFKILL=y
@@ -225,6 +234,7 @@ CONFIG_AD525X_DPOT_I2C=y
 CONFIG_ICS932S401=y
 CONFIG_ATMEL_SSC=m
 CONFIG_QCOM_COINCELL=m
+CONFIG_QCOM_FASTRPC=m
 CONFIG_APDS9802ALS=y
 CONFIG_ISL29003=y
 CONFIG_PCI_ENDPOINT_TEST=m
@@ -282,12 +292,14 @@ CONFIG_MARVELL_PHY=y
 CONFIG_AT803X_PHY=y
 CONFIG_ROCKCHIP_PHY=y
 CONFIG_DP83867_PHY=y
+CONFIG_USB_BRCMSTB=m
 CONFIG_USB_PEGASUS=y
 CONFIG_USB_RTL8152=m
 CONFIG_USB_LAN78XX=m
 CONFIG_USB_USBNET=y
 CONFIG_USB_NET_SMSC75XX=y
 CONFIG_USB_NET_SMSC95XX=y
+CONFIG_WCN36XX=m
 CONFIG_BRCMFMAC=m
 CONFIG_MWIFIEX=m
 CONFIG_MWIFIEX_SDIO=m
@@ -316,6 +328,7 @@ CONFIG_TOUCHSCREEN_ST1232=m
 CONFIG_TOUCHSCREEN_STMPE=y
 CONFIG_TOUCHSCREEN_SUN4I=y
 CONFIG_INPUT_MISC=y
+CONFIG_INPUT_PM8941_PWRKEY=y
 CONFIG_INPUT_MAX77693_HAPTIC=m
 CONFIG_INPUT_MAX8997_HAPTIC=m
 CONFIG_INPUT_CPCAP_PWRBUTTON=m
@@ -398,6 +411,8 @@ CONFIG_I2C_IMX=y
 CONFIG_I2C_MESON=y
 CONFIG_I2C_MV64XXX=y
 CONFIG_I2C_OWL=y
+CONFIG_I2C_QCOM_CCI=m
+CONFIG_I2C_QUP=y
 CONFIG_I2C_RIIC=y
 CONFIG_I2C_RK3X=y
 CONFIG_I2C_S3C2410=y
@@ -426,6 +441,7 @@ CONFIG_SPI_ORION=y
 CONFIG_SPI_PL022=y
 CONFIG_SPI_ROCKCHIP=m
 CONFIG_SPI_RSPI=y
+CONFIG_SPI_QUP=m
 CONFIG_SPI_S3C64XX=m
 CONFIG_SPI_SH_MSIOF=m
 CONFIG_SPI_SH_HSPI=y
@@ -476,6 +492,8 @@ CONFIG_GPIO_TWL4030=y
 CONFIG_POWER_RESET_AS3722=y
 CONFIG_POWER_RESET_GPIO=y
 CONFIG_POWER_RESET_GPIO_RESTART=y
+CONFIG_POWER_RESET_MSM=y
+CONFIG_POWER_RESET_QCOM_PON=y
 CONFIG_POWER_RESET_ST=y
 CONFIG_POWER_RESET_KEYSTONE=y
 CONFIG_POWER_RESET_RMOBILE=y
@@ -493,6 +511,7 @@ CONFIG_CHARGER_MAX14577=m
 CONFIG_CHARGER_MAX77693=m
 CONFIG_CHARGER_MAX8997=m
 CONFIG_CHARGER_MAX8998=m
+CONFIG_CHARGER_SMB347=m
 CONFIG_CHARGER_TPS65090=y
 CONFIG_SENSORS_ARM_SCMI=y
 CONFIG_SENSORS_ASPEED=m
@@ -516,6 +535,7 @@ CONFIG_ST_THERMAL_MEMMAP=y
 CONFIG_TEGRA_SOCTHERM=m
 CONFIG_TEGRA30_TSENSOR=m
 CONFIG_GENERIC_ADC_THERMAL=m
+CONFIG_QCOM_TSENS=y
 CONFIG_UNIPHIER_THERMAL=y
 CONFIG_DA9063_WATCHDOG=m
 CONFIG_XILINX_WATCHDOG=y
@@ -531,11 +551,13 @@ CONFIG_SUNXI_WATCHDOG=y
 CONFIG_IMX2_WDT=y
 CONFIG_ST_LPC_WATCHDOG=y
 CONFIG_TEGRA_WATCHDOG=m
+CONFIG_QCOM_WDT=m
 CONFIG_MESON_WATCHDOG=y
 CONFIG_DIGICOLOR_WATCHDOG=y
 CONFIG_RENESAS_WDT=m
 CONFIG_RENESAS_RZAWDT=m
 CONFIG_STPMIC1_WATCHDOG=y
+CONFIG_PM8916_WATCHDOG=m
 CONFIG_BCM47XX_WDT=y
 CONFIG_BCM2835_WDT=y
 CONFIG_BCM_KONA_WDT=y
@@ -602,7 +624,8 @@ CONFIG_REGULATOR_PALMAS=y
 CONFIG_REGULATOR_PBIAS=y
 CONFIG_REGULATOR_PWM=y
 CONFIG_REGULATOR_QCOM_RPM=y
-CONFIG_REGULATOR_QCOM_SMD_RPM=m
+CONFIG_REGULATOR_QCOM_SMD_RPM=y
+CONFIG_REGULATOR_QCOM_SPMI=y
 CONFIG_REGULATOR_RK808=y
 CONFIG_REGULATOR_RN5T618=y
 CONFIG_REGULATOR_S2MPA01=m
@@ -691,6 +714,7 @@ CONFIG_DRM_PANEL_RAYDIUM_RM68200=m
 CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03=m
 CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=m
 CONFIG_DRM_LVDS_CODEC=m
+CONFIG_DRM_DISPLAY_CONNECTOR=m
 CONFIG_DRM_NXP_PTN3460=m
 CONFIG_DRM_PARADE_PS8622=m
 CONFIG_DRM_SII902X=m
@@ -741,6 +765,8 @@ CONFIG_SND_SOC_FSL_SAI=m
 CONFIG_SND_PXA_SOC_SSP=m
 CONFIG_SND_MMP_SOC_SSPA=m
 CONFIG_SND_PXA910_SOC=m
+CONFIG_SND_SOC_QCOM=m
+CONFIG_SND_SOC_APQ8016_SBC=m
 CONFIG_SND_SOC_ROCKCHIP=m
 CONFIG_SND_SOC_ROCKCHIP_SPDIF=m
 CONFIG_SND_SOC_ROCKCHIP_MAX98090=m
@@ -774,6 +800,8 @@ CONFIG_SND_SOC_TEGRA_MAX98090=m
 CONFIG_SND_SOC_AK4642=m
 CONFIG_SND_SOC_CPCAP=m
 CONFIG_SND_SOC_CS42L51_I2C=m
+CONFIG_SND_SOC_MSM8916_WCD_ANALOG=m
+CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=m
 CONFIG_SND_SOC_SGTL5000=m
 CONFIG_SND_SOC_STI_SAS=m
 CONFIG_SND_SOC_WM8978=m
@@ -936,6 +964,7 @@ CONFIG_RTC_DRV_AT91SAM9=m
 CONFIG_RTC_DRV_VT8500=y
 CONFIG_RTC_DRV_SUNXI=y
 CONFIG_RTC_DRV_MV=y
+CONFIG_RTC_DRV_PM8XXX=m
 CONFIG_RTC_DRV_TEGRA=y
 CONFIG_RTC_DRV_ST_LPC=y
 CONFIG_RTC_DRV_STM32=y
@@ -984,26 +1013,47 @@ CONFIG_COMMON_CLK_SCMI=y
 CONFIG_COMMON_CLK_S2MPS11=m
 CONFIG_CLK_RASPBERRYPI=y
 CONFIG_COMMON_CLK_QCOM=y
+CONFIG_QCOM_A53PLL=y
+CONFIG_QCOM_CLK_APCS_MSM8916=y
 CONFIG_QCOM_CLK_RPM=y
+CONFIG_QCOM_CLK_SMD_RPM=y
 CONFIG_APQ_MMCC_8084=y
 CONFIG_MSM_GCC_8660=y
+CONFIG_MSM_GCC_8916=y
 CONFIG_MSM_MMCC_8960=y
 CONFIG_MSM_MMCC_8974=y
+CONFIG_HWSPINLOCK=y
+CONFIG_HWSPINLOCK_QCOM=y
 CONFIG_MICROCHIP_PIT64B=y
 CONFIG_BCM2835_MBOX=y
+CONFIG_QCOM_APCS_IPC=y
+CONFIG_QCOM_IPCC=y
 CONFIG_ROCKCHIP_IOMMU=y
 CONFIG_TEGRA_IOMMU_GART=y
 CONFIG_TEGRA_IOMMU_SMMU=y
 CONFIG_EXYNOS_IOMMU=y
+CONFIG_QCOM_IOMMU=y
 CONFIG_REMOTEPROC=y
+CONFIG_QCOM_Q6V5_MSS=m
+CONFIG_QCOM_SYSMON=m
+CONFIG_QCOM_WCNSS_PIL=m
 CONFIG_ST_REMOTEPROC=m
+CONFIG_RPMSG_QCOM_SMD=y
 CONFIG_RPMSG_VIRTIO=m
 CONFIG_ASPEED_LPC_CTRL=m
 CONFIG_ASPEED_LPC_SNOOP=m
 CONFIG_ASPEED_P2A_CTRL=m
 CONFIG_RASPBERRYPI_POWER=y
+CONFIG_QCOM_CPR=y
 CONFIG_QCOM_GSBI=y
-CONFIG_QCOM_SMD_RPM=m
+CONFIG_QCOM_RMTFS_MEM=m
+CONFIG_QCOM_RPMPD=y
+CONFIG_QCOM_SMEM=y
+CONFIG_QCOM_SMD_RPM=y
+CONFIG_QCOM_SMP2P=y
+CONFIG_QCOM_SMSM=y
+CONFIG_QCOM_SOCINFO=m
+CONFIG_QCOM_STATS=m
 CONFIG_QCOM_WCNSS_CTRL=m
 CONFIG_ARCH_EMEV2=y
 CONFIG_ARCH_R8A7794=y
@@ -1036,6 +1086,7 @@ CONFIG_DEVFREQ_EVENT_EXYNOS_NOCP=m
 CONFIG_EXTCON_MAX14577=m
 CONFIG_EXTCON_MAX77693=m
 CONFIG_EXTCON_MAX8997=m
+CONFIG_EXTCON_USB_GPIO=y
 CONFIG_TI_AEMIF=y
 CONFIG_STM32_FMC2_EBI=y
 CONFIG_EXYNOS5422_DMC=m
@@ -1048,6 +1099,7 @@ CONFIG_BERLIN2_ADC=m
 CONFIG_CPCAP_ADC=m
 CONFIG_EXYNOS_ADC=m
 CONFIG_MESON_SARADC=m
+CONFIG_QCOM_SPMI_VADC=m
 CONFIG_ROCKCHIP_SARADC=m
 CONFIG_STM32_ADC_CORE=m
 CONFIG_STM32_ADC=m
@@ -1090,9 +1142,11 @@ CONFIG_PHY_SUN9I_USB=y
 CONFIG_PHY_HIX5HD2_SATA=y
 CONFIG_PHY_BERLIN_SATA=y
 CONFIG_PHY_BERLIN_USB=y
+CONFIG_PHY_BRCM_USB=m
 CONFIG_PHY_MMP3_USB=m
 CONFIG_PHY_CPCAP_USB=m
 CONFIG_PHY_QCOM_APQ8064_SATA=m
+CONFIG_PHY_QCOM_USB_HS=y
 CONFIG_PHY_RCAR_GEN2=m
 CONFIG_PHY_ROCKCHIP_DP=m
 CONFIG_PHY_ROCKCHIP_USB=y
@@ -1110,6 +1164,7 @@ CONFIG_TI_PIPE3=y
 CONFIG_TWL4030_USB=m
 CONFIG_RAS=y
 CONFIG_NVMEM_IMX_OCOTP=y
+CONFIG_QCOM_QFPROM=y
 CONFIG_ROCKCHIP_EFUSE=m
 CONFIG_NVMEM_SUNXI_SID=y
 CONFIG_NVMEM_VF610_OCOTP=y
@@ -1122,6 +1177,8 @@ CONFIG_FSI_MASTER_ASPEED=m
 CONFIG_FSI_SCOM=m
 CONFIG_FSI_SBEFIFO=m
 CONFIG_FSI_OCC=m
+CONFIG_INTERCONNECT_QCOM=y
+CONFIG_INTERCONNECT_QCOM_MSM8916=y
 CONFIG_COUNTER=m
 CONFIG_STM32_TIMER_CNT=m
 CONFIG_STM32_LPTIMER_CNT=m
@@ -1161,6 +1218,8 @@ CONFIG_CRYPTO_DEV_ATMEL_AES=m
 CONFIG_CRYPTO_DEV_ATMEL_TDES=m
 CONFIG_CRYPTO_DEV_ATMEL_SHA=m
 CONFIG_CRYPTO_DEV_MARVELL_CESA=m
+CONFIG_CRYPTO_DEV_QCE=m
+CONFIG_CRYPTO_DEV_QCOM_RNG=m
 CONFIG_CRYPTO_DEV_ROCKCHIP=m
 CONFIG_CRYPTO_DEV_STM32_CRC=m
 CONFIG_CRYPTO_DEV_STM32_HASH=m
diff --git a/arch/arm/configs/netwinder_defconfig b/arch/arm/configs/netwinder_defconfig
index 2e3b20ef0db1..c3c171cec91b 100644
--- a/arch/arm/configs/netwinder_defconfig
+++ b/arch/arm/configs/netwinder_defconfig
@@ -71,7 +71,6 @@ CONFIG_NFS_V3=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
 CONFIG_SMB_FS=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_NLS_CODEPAGE_437=y
diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig
index dedaaae3d0d8..29b1f192afbb 100644
--- a/arch/arm/configs/pxa_defconfig
+++ b/arch/arm/configs/pxa_defconfig
@@ -41,8 +41,6 @@ CONFIG_MACH_EXEDA=y
 CONFIG_MACH_CM_X300=y
 CONFIG_MACH_CAPC7117=y
 CONFIG_ARCH_GUMSTIX=y
-CONFIG_MACH_INTELMOTE2=y
-CONFIG_MACH_STARGATE2=y
 CONFIG_MACH_XCEP=y
 CONFIG_TRIZEPS_PXA=y
 CONFIG_MACH_TRIZEPS4WL=y
@@ -487,7 +485,6 @@ CONFIG_SND_SOC_ZYLONITE=m
 CONFIG_SND_PXA2XX_SOC_HX4700=m
 CONFIG_SND_PXA2XX_SOC_MAGICIAN=m
 CONFIG_SND_PXA2XX_SOC_MIOA701=m
-CONFIG_SND_PXA2XX_SOC_IMOTE2=m
 CONFIG_SND_SOC_AK4642=m
 CONFIG_SND_SOC_WM8978=m
 CONFIG_SND_SIMPLE_CARD=m
diff --git a/arch/arm/configs/sama7_defconfig b/arch/arm/configs/sama7_defconfig
index 0368068e04d9..07b0494ef743 100644
--- a/arch/arm/configs/sama7_defconfig
+++ b/arch/arm/configs/sama7_defconfig
@@ -26,6 +26,13 @@ CONFIG_FORCE_MAX_ZONEORDER=15
 CONFIG_UACCESS_WITH_MEMCPY=y
 # CONFIG_ATAGS is not set
 CONFIG_CMDLINE="console=ttyS0,115200 earlyprintk ignore_loglevel"
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPUFREQ_DT=y
+CONFIG_CPU_IDLE=y
 CONFIG_VFP=y
 CONFIG_NEON=y
 CONFIG_KERNEL_MODE_NEON=y
@@ -82,7 +89,11 @@ CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=y
 CONFIG_MTD_TESTS=m
 CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_MTD_NAND_ATMEL=y
+# CONFIG_MTD_NAND_ECC_SW_HAMMING is not set
 CONFIG_MTD_SPI_NOR=y
+CONFIG_MTD_UBI=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=1
@@ -170,21 +181,21 @@ CONFIG_RTC_DRV_AT91RM9200=y
 CONFIG_RTC_DRV_AT91SAM9=y
 CONFIG_DMADEVICES=y
 CONFIG_AT_XDMAC=y
-CONFIG_DMATEST=y
 CONFIG_STAGING=y
 CONFIG_MICROCHIP_PIT64B=y
 # CONFIG_IOMMU_SUPPORT is not set
-# CONFIG_ATMEL_EBI is not set
 CONFIG_IIO=y
 CONFIG_IIO_SW_TRIGGER=y
 CONFIG_AT91_SAMA5D2_ADC=y
 CONFIG_PWM=y
 CONFIG_PWM_ATMEL=y
+CONFIG_MCHP_EIC=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 CONFIG_FANOTIFY=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
+CONFIG_UBIFS_FS=y
 CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y
 CONFIG_NLS_CODEPAGE_437=y
@@ -192,9 +203,19 @@ CONFIG_NLS_CODEPAGE_850=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_UTF8=y
 CONFIG_LSM="N"
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_LZO=y
-# CONFIG_CRYPTO_HW is not set
+CONFIG_CRYPTO_AUTHENC=y
+CONFIG_CRYPTO_GCM=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CFB=y
+CONFIG_CRYPTO_OFB=y
+CONFIG_CRYPTO_XTS=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+CONFIG_CRYPTO_DEV_ATMEL_AES=y
+CONFIG_CRYPTO_DEV_ATMEL_TDES=y
+CONFIG_CRYPTO_DEV_ATMEL_SHA=y
 CONFIG_CRC_CCITT=y
 CONFIG_CRC_ITU_T=y
 CONFIG_DMA_CMA=y
diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig
index 2c2702ec6d02..db8df8a3a7b1 100644
--- a/arch/arm/configs/shmobile_defconfig
+++ b/arch/arm/configs/shmobile_defconfig
@@ -69,9 +69,13 @@ CONFIG_INPUT_DA9063_ONKEY=y
 CONFIG_INPUT_ADXL34X=y
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
+# CONFIG_SERIAL_8250_16550A_VARIANTS is not set
 CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
 CONFIG_SERIAL_8250_DW=y
 CONFIG_SERIAL_8250_EM=y
+# CONFIG_SERIAL_8250_PERICOM is not set
 CONFIG_SERIAL_SH_SCI=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_DEMUX_PINCTRL=y
diff --git a/arch/arm/configs/versatile_defconfig b/arch/arm/configs/versatile_defconfig
index d06aa64e05a1..c2d79a67f81f 100644
--- a/arch/arm/configs/versatile_defconfig
+++ b/arch/arm/configs/versatile_defconfig
@@ -86,7 +86,6 @@ CONFIG_ROMFS_FS=y
 CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
 CONFIG_NLS_CODEPAGE_850=m
 CONFIG_NLS_ISO8859_1=m
 CONFIG_MAGIC_SYSRQ=y
diff --git a/arch/arm/configs/viper_defconfig b/arch/arm/configs/viper_defconfig
index 989599ce5300..c28539bfd128 100644
--- a/arch/arm/configs/viper_defconfig
+++ b/arch/arm/configs/viper_defconfig
@@ -145,7 +145,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_850=m
diff --git a/arch/arm/configs/zeus_defconfig b/arch/arm/configs/zeus_defconfig
index d3b98c4d225b..25bb6995f105 100644
--- a/arch/arm/configs/zeus_defconfig
+++ b/arch/arm/configs/zeus_defconfig
@@ -160,7 +160,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_850=m
diff --git a/arch/arm/crypto/aes-neonbs-core.S b/arch/arm/crypto/aes-neonbs-core.S
index 7d0cc7f226a5..7b61032f29fa 100644
--- a/arch/arm/crypto/aes-neonbs-core.S
+++ b/arch/arm/crypto/aes-neonbs-core.S
@@ -758,29 +758,24 @@ ENTRY(aesbs_cbc_decrypt)
 ENDPROC(aesbs_cbc_decrypt)
 
 	.macro		next_ctr, q
-	vmov.32		\q\()h[1], r10
+	vmov		\q\()h, r9, r10
 	adds		r10, r10, #1
-	vmov.32		\q\()h[0], r9
 	adcs		r9, r9, #0
-	vmov.32		\q\()l[1], r8
+	vmov		\q\()l, r7, r8
 	adcs		r8, r8, #0
-	vmov.32		\q\()l[0], r7
 	adc		r7, r7, #0
 	vrev32.8	\q, \q
 	.endm
 
 	/*
 	 * aesbs_ctr_encrypt(u8 out[], u8 const in[], u8 const rk[],
-	 *		     int rounds, int blocks, u8 ctr[], u8 final[])
+	 *		     int rounds, int bytes, u8 ctr[])
 	 */
 ENTRY(aesbs_ctr_encrypt)
 	mov		ip, sp
 	push		{r4-r10, lr}
 
-	ldm		ip, {r5-r7}		// load args 4-6
-	teq		r7, #0
-	addne		r5, r5, #1		// one extra block if final != 0
-
+	ldm		ip, {r5, r6}		// load args 4-5
 	vld1.8		{q0}, [r6]		// load counter
 	vrev32.8	q1, q0
 	vmov		r9, r10, d3
@@ -792,20 +787,19 @@ ENTRY(aesbs_ctr_encrypt)
 	adc		r7, r7, #0
 
 99:	vmov		q1, q0
+	sub		lr, r5, #1
 	vmov		q2, q0
+	adr		ip, 0f
 	vmov		q3, q0
+	and		lr, lr, #112
 	vmov		q4, q0
+	cmp		r5, #112
 	vmov		q5, q0
+	sub		ip, ip, lr, lsl #1
 	vmov		q6, q0
+	add		ip, ip, lr, lsr #2
 	vmov		q7, q0
-
-	adr		ip, 0f
-	sub		lr, r5, #1
-	and		lr, lr, #7
-	cmp		r5, #8
-	sub		ip, ip, lr, lsl #5
-	sub		ip, ip, lr, lsl #2
-	movlt		pc, ip			// computed goto if blocks < 8
+	movle		pc, ip			// computed goto if bytes < 112
 
 	next_ctr	q1
 	next_ctr	q2
@@ -820,12 +814,14 @@ ENTRY(aesbs_ctr_encrypt)
 	bl		aesbs_encrypt8
 
 	adr		ip, 1f
-	and		lr, r5, #7
-	cmp		r5, #8
-	movgt		r4, #0
-	ldrle		r4, [sp, #40]		// load final in the last round
-	sub		ip, ip, lr, lsl #2
-	movlt		pc, ip			// computed goto if blocks < 8
+	sub		lr, r5, #1
+	cmp		r5, #128
+	bic		lr, lr, #15
+	ands		r4, r5, #15		// preserves C flag
+	teqcs		r5, r5			// set Z flag if not last iteration
+	sub		ip, ip, lr, lsr #2
+	rsb		r4, r4, #16
+	movcc		pc, ip			// computed goto if bytes < 128
 
 	vld1.8		{q8}, [r1]!
 	vld1.8		{q9}, [r1]!
@@ -834,46 +830,70 @@ ENTRY(aesbs_ctr_encrypt)
 	vld1.8		{q12}, [r1]!
 	vld1.8		{q13}, [r1]!
 	vld1.8		{q14}, [r1]!
-	teq		r4, #0			// skip last block if 'final'
-1:	bne		2f
+1:	subne		r1, r1, r4
 	vld1.8		{q15}, [r1]!
 
-2:	adr		ip, 3f
-	cmp		r5, #8
-	sub		ip, ip, lr, lsl #3
-	movlt		pc, ip			// computed goto if blocks < 8
+	add		ip, ip, #2f - 1b
 
 	veor		q0, q0, q8
-	vst1.8		{q0}, [r0]!
 	veor		q1, q1, q9
-	vst1.8		{q1}, [r0]!
 	veor		q4, q4, q10
-	vst1.8		{q4}, [r0]!
 	veor		q6, q6, q11
-	vst1.8		{q6}, [r0]!
 	veor		q3, q3, q12
-	vst1.8		{q3}, [r0]!
 	veor		q7, q7, q13
-	vst1.8		{q7}, [r0]!
 	veor		q2, q2, q14
+	bne		3f
+	veor		q5, q5, q15
+
+	movcc		pc, ip			// computed goto if bytes < 128
+
+	vst1.8		{q0}, [r0]!
+	vst1.8		{q1}, [r0]!
+	vst1.8		{q4}, [r0]!
+	vst1.8		{q6}, [r0]!
+	vst1.8		{q3}, [r0]!
+	vst1.8		{q7}, [r0]!
 	vst1.8		{q2}, [r0]!
-	teq		r4, #0			// skip last block if 'final'
-	W(bne)		5f
-3:	veor		q5, q5, q15
+2:	subne		r0, r0, r4
 	vst1.8		{q5}, [r0]!
 
-4:	next_ctr	q0
+	next_ctr	q0
 
-	subs		r5, r5, #8
+	subs		r5, r5, #128
 	bgt		99b
 
 	vst1.8		{q0}, [r6]
 	pop		{r4-r10, pc}
 
-5:	vst1.8		{q5}, [r4]
-	b		4b
+3:	adr		lr, .Lpermute_table + 16
+	cmp		r5, #16			// Z flag remains cleared
+	sub		lr, lr, r4
+	vld1.8		{q8-q9}, [lr]
+	vtbl.8		d16, {q5}, d16
+	vtbl.8		d17, {q5}, d17
+	veor		q5, q8, q15
+	bcc		4f			// have to reload prev if R5 < 16
+	vtbx.8		d10, {q2}, d18
+	vtbx.8		d11, {q2}, d19
+	mov		pc, ip			// branch back to VST sequence
+
+4:	sub		r0, r0, r4
+	vshr.s8		q9, q9, #7		// create mask for VBIF
+	vld1.8		{q8}, [r0]		// reload
+	vbif		q5, q8, q9
+	vst1.8		{q5}, [r0]
+	pop		{r4-r10, pc}
 ENDPROC(aesbs_ctr_encrypt)
 
+	.align		6
+.Lpermute_table:
+	.byte		0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
+	.byte		0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
+	.byte		0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07
+	.byte		0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f
+	.byte		0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
+	.byte		0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
+
 	.macro		next_tweak, out, in, const, tmp
 	vshr.s64	\tmp, \in, #63
 	vand		\tmp, \tmp, \const
@@ -888,6 +908,7 @@ ENDPROC(aesbs_ctr_encrypt)
 	 * aesbs_xts_decrypt(u8 out[], u8 const in[], u8 const rk[], int rounds,
 	 *		     int blocks, u8 iv[], int reorder_last_tweak)
 	 */
+	.align		6
 __xts_prepare8:
 	vld1.8		{q14}, [r7]		// load iv
 	vmov.i32	d30, #0x87		// compose tweak mask vector
diff --git a/arch/arm/crypto/aes-neonbs-glue.c b/arch/arm/crypto/aes-neonbs-glue.c
index 5c6cd3c63cbc..f00f042ef357 100644
--- a/arch/arm/crypto/aes-neonbs-glue.c
+++ b/arch/arm/crypto/aes-neonbs-glue.c
@@ -37,7 +37,7 @@ asmlinkage void aesbs_cbc_decrypt(u8 out[], u8 const in[], u8 const rk[],
 				  int rounds, int blocks, u8 iv[]);
 
 asmlinkage void aesbs_ctr_encrypt(u8 out[], u8 const in[], u8 const rk[],
-				  int rounds, int blocks, u8 ctr[], u8 final[]);
+				  int rounds, int blocks, u8 ctr[]);
 
 asmlinkage void aesbs_xts_encrypt(u8 out[], u8 const in[], u8 const rk[],
 				  int rounds, int blocks, u8 iv[], int);
@@ -243,32 +243,25 @@ static int ctr_encrypt(struct skcipher_request *req)
 	err = skcipher_walk_virt(&walk, req, false);
 
 	while (walk.nbytes > 0) {
-		unsigned int blocks = walk.nbytes / AES_BLOCK_SIZE;
-		u8 *final = (walk.total % AES_BLOCK_SIZE) ? buf : NULL;
+		const u8 *src = walk.src.virt.addr;
+		u8 *dst = walk.dst.virt.addr;
+		int bytes = walk.nbytes;
 
-		if (walk.nbytes < walk.total) {
-			blocks = round_down(blocks,
-					    walk.stride / AES_BLOCK_SIZE);
-			final = NULL;
-		}
+		if (unlikely(bytes < AES_BLOCK_SIZE))
+			src = dst = memcpy(buf + sizeof(buf) - bytes,
+					   src, bytes);
+		else if (walk.nbytes < walk.total)
+			bytes &= ~(8 * AES_BLOCK_SIZE - 1);
 
 		kernel_neon_begin();
-		aesbs_ctr_encrypt(walk.dst.virt.addr, walk.src.virt.addr,
-				  ctx->rk, ctx->rounds, blocks, walk.iv, final);
+		aesbs_ctr_encrypt(dst, src, ctx->rk, ctx->rounds, bytes, walk.iv);
 		kernel_neon_end();
 
-		if (final) {
-			u8 *dst = walk.dst.virt.addr + blocks * AES_BLOCK_SIZE;
-			u8 *src = walk.src.virt.addr + blocks * AES_BLOCK_SIZE;
+		if (unlikely(bytes < AES_BLOCK_SIZE))
+			memcpy(walk.dst.virt.addr,
+			       buf + sizeof(buf) - bytes, bytes);
 
-			crypto_xor_cpy(dst, src, final,
-				       walk.total % AES_BLOCK_SIZE);
-
-			err = skcipher_walk_done(&walk, 0);
-			break;
-		}
-		err = skcipher_walk_done(&walk,
-					 walk.nbytes - blocks * AES_BLOCK_SIZE);
+		err = skcipher_walk_done(&walk, walk.nbytes - bytes);
 	}
 
 	return err;
diff --git a/arch/arm/crypto/blake2s-shash.c b/arch/arm/crypto/blake2s-shash.c
index 17c1c3bfe2f5..763c73beea2d 100644
--- a/arch/arm/crypto/blake2s-shash.c
+++ b/arch/arm/crypto/blake2s-shash.c
@@ -13,12 +13,12 @@
 static int crypto_blake2s_update_arm(struct shash_desc *desc,
 				     const u8 *in, unsigned int inlen)
 {
-	return crypto_blake2s_update(desc, in, inlen, blake2s_compress);
+	return crypto_blake2s_update(desc, in, inlen, false);
 }
 
 static int crypto_blake2s_final_arm(struct shash_desc *desc, u8 *out)
 {
-	return crypto_blake2s_final(desc, out, blake2s_compress);
+	return crypto_blake2s_final(desc, out, false);
 }
 
 #define BLAKE2S_ALG(name, driver_name, digest_size)			\
diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index 6fe67963ba5a..34fe8d2dd5d1 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -86,6 +86,10 @@
 
 #define IMM12_MASK 0xfff
 
+/* the frame pointer used for stack unwinding */
+ARM(	fpreg	.req	r11	)
+THUMB(	fpreg	.req	r7	)
+
 /*
  * Enable and disable interrupts
  */
@@ -107,6 +111,16 @@
 	.endm
 #endif
 
+#if __LINUX_ARM_ARCH__ < 7
+	.macro	dsb, args
+	mcr	p15, 0, r0, c7, c10, 4
+	.endm
+
+	.macro	isb, args
+	mcr	p15, 0, r0, c7, c5, 4
+	.endm
+#endif
+
 	.macro asm_trace_hardirqs_off, save=1
 #if defined(CONFIG_TRACE_IRQFLAGS)
 	.if \save
@@ -199,43 +213,12 @@
 	.endm
 	.endr
 
-	.macro	get_current, rd
-#ifdef CONFIG_CURRENT_POINTER_IN_TPIDRURO
-	mrc	p15, 0, \rd, c13, c0, 3		@ get TPIDRURO register
-#else
-	get_thread_info \rd
-	ldr	\rd, [\rd, #TI_TASK]
-#endif
-	.endm
-
-	.macro	set_current, rn
-#ifdef CONFIG_CURRENT_POINTER_IN_TPIDRURO
-	mcr	p15, 0, \rn, c13, c0, 3		@ set TPIDRURO register
-#endif
-	.endm
-
-	.macro	reload_current, t1:req, t2:req
-#ifdef CONFIG_CURRENT_POINTER_IN_TPIDRURO
-	adr_l	\t1, __entry_task		@ get __entry_task base address
-	mrc	p15, 0, \t2, c13, c0, 4		@ get per-CPU offset
-	ldr	\t1, [\t1, \t2]			@ load variable
-	mcr	p15, 0, \t1, c13, c0, 3		@ store in TPIDRURO
-#endif
-	.endm
-
 /*
  * Get current thread_info.
  */
 	.macro	get_thread_info, rd
-#ifdef CONFIG_THREAD_INFO_IN_TASK
 	/* thread_info is the first member of struct task_struct */
 	get_current \rd
-#else
- ARM(	mov	\rd, sp, lsr #THREAD_SIZE_ORDER + PAGE_SHIFT	)
- THUMB(	mov	\rd, sp			)
- THUMB(	lsr	\rd, \rd, #THREAD_SIZE_ORDER + PAGE_SHIFT	)
-	mov	\rd, \rd, lsl #THREAD_SIZE_ORDER + PAGE_SHIFT
-#endif
 	.endm
 
 /*
@@ -310,6 +293,80 @@
 #define ALT_UP_B(label) b label
 #endif
 
+	/*
+	 * this_cpu_offset - load the per-CPU offset of this CPU into
+	 * 		     register 'rd'
+	 */
+	.macro		this_cpu_offset, rd:req
+#ifdef CONFIG_SMP
+ALT_SMP(mrc		p15, 0, \rd, c13, c0, 4)
+#ifdef CONFIG_CPU_V6
+ALT_UP_B(.L1_\@)
+.L0_\@:
+	.subsection	1
+.L1_\@: ldr_va		\rd, __per_cpu_offset
+	b		.L0_\@
+	.previous
+#endif
+#else
+	mov		\rd, #0
+#endif
+	.endm
+
+	/*
+	 * set_current - store the task pointer of this CPU's current task
+	 */
+	.macro		set_current, rn:req, tmp:req
+#if defined(CONFIG_CURRENT_POINTER_IN_TPIDRURO) || defined(CONFIG_SMP)
+9998:	mcr		p15, 0, \rn, c13, c0, 3		@ set TPIDRURO register
+#ifdef CONFIG_CPU_V6
+ALT_UP_B(.L0_\@)
+	.subsection	1
+.L0_\@: str_va		\rn, __current, \tmp
+	b		.L1_\@
+	.previous
+.L1_\@:
+#endif
+#else
+	str_va		\rn, __current, \tmp
+#endif
+	.endm
+
+	/*
+	 * get_current - load the task pointer of this CPU's current task
+	 */
+	.macro		get_current, rd:req
+#if defined(CONFIG_CURRENT_POINTER_IN_TPIDRURO) || defined(CONFIG_SMP)
+9998:	mrc		p15, 0, \rd, c13, c0, 3		@ get TPIDRURO register
+#ifdef CONFIG_CPU_V6
+ALT_UP_B(.L0_\@)
+	.subsection	1
+.L0_\@: ldr_va		\rd, __current
+	b		.L1_\@
+	.previous
+.L1_\@:
+#endif
+#else
+	ldr_va		\rd, __current
+#endif
+	.endm
+
+	/*
+	 * reload_current - reload the task pointer of this CPU's current task
+	 *		    into the TLS register
+	 */
+	.macro		reload_current, t1:req, t2:req
+#if defined(CONFIG_CURRENT_POINTER_IN_TPIDRURO) || defined(CONFIG_SMP)
+#ifdef CONFIG_CPU_V6
+ALT_SMP(nop)
+ALT_UP_B(.L0_\@)
+#endif
+	ldr_this_cpu	\t1, __entry_task, \t1, \t2
+	mcr		p15, 0, \t1, c13, c0, 3		@ store in TPIDRURO
+.L0_\@:
+#endif
+	.endm
+
 /*
  * Instruction barrier
  */
@@ -566,12 +623,12 @@ THUMB(	orr	\reg , \reg , #PSR_T_BIT	)
 	/*
 	 * mov_l - move a constant value or [relocated] address into a register
 	 */
-	.macro		mov_l, dst:req, imm:req
+	.macro		mov_l, dst:req, imm:req, cond
 	.if		__LINUX_ARM_ARCH__ < 7
-	ldr		\dst, =\imm
+	ldr\cond	\dst, =\imm
 	.else
-	movw		\dst, #:lower16:\imm
-	movt		\dst, #:upper16:\imm
+	movw\cond	\dst, #:lower16:\imm
+	movt\cond	\dst, #:upper16:\imm
 	.endif
 	.endm
 
@@ -609,6 +666,78 @@ THUMB(	orr	\reg , \reg , #PSR_T_BIT	)
 	__adldst_l	str, \src, \sym, \tmp, \cond
 	.endm
 
+	.macro		__ldst_va, op, reg, tmp, sym, cond
+#if __LINUX_ARM_ARCH__ >= 7 || \
+    !defined(CONFIG_ARM_HAS_GROUP_RELOCS) || \
+    (defined(MODULE) && defined(CONFIG_ARM_MODULE_PLTS))
+	mov_l		\tmp, \sym, \cond
+	\op\cond	\reg, [\tmp]
+#else
+	/*
+	 * Avoid a literal load, by emitting a sequence of ADD/LDR instructions
+	 * with the appropriate relocations. The combined sequence has a range
+	 * of -/+ 256 MiB, which should be sufficient for the core kernel and
+	 * for modules loaded into the module region.
+	 */
+	.globl		\sym
+	.reloc		.L0_\@, R_ARM_ALU_PC_G0_NC, \sym
+	.reloc		.L1_\@, R_ARM_ALU_PC_G1_NC, \sym
+	.reloc		.L2_\@, R_ARM_LDR_PC_G2, \sym
+.L0_\@: sub\cond	\tmp, pc, #8
+.L1_\@: sub\cond	\tmp, \tmp, #4
+.L2_\@: \op\cond	\reg, [\tmp, #0]
+#endif
+	.endm
+
+	/*
+	 * ldr_va - load a 32-bit word from the virtual address of \sym
+	 */
+	.macro		ldr_va, rd:req, sym:req, cond
+	__ldst_va	ldr, \rd, \rd, \sym, \cond
+	.endm
+
+	/*
+	 * str_va - store a 32-bit word to the virtual address of \sym
+	 */
+	.macro		str_va, rn:req, sym:req, tmp:req, cond
+	__ldst_va	str, \rn, \tmp, \sym, \cond
+	.endm
+
+	/*
+	 * ldr_this_cpu_armv6 - Load a 32-bit word from the per-CPU variable 'sym',
+	 *			without using a temp register. Supported in ARM mode
+	 *			only.
+	 */
+	.macro		ldr_this_cpu_armv6, rd:req, sym:req
+	this_cpu_offset	\rd
+	.globl		\sym
+	.reloc		.L0_\@, R_ARM_ALU_PC_G0_NC, \sym
+	.reloc		.L1_\@, R_ARM_ALU_PC_G1_NC, \sym
+	.reloc		.L2_\@, R_ARM_LDR_PC_G2, \sym
+	add		\rd, \rd, pc
+.L0_\@: sub		\rd, \rd, #4
+.L1_\@: sub		\rd, \rd, #0
+.L2_\@: ldr		\rd, [\rd, #4]
+	.endm
+
+	/*
+	 * ldr_this_cpu - Load a 32-bit word from the per-CPU variable 'sym'
+	 *		  into register 'rd', which may be the stack pointer,
+	 *		  using 't1' and 't2' as general temp registers. These
+	 *		  are permitted to overlap with 'rd' if != sp
+	 */
+	.macro		ldr_this_cpu, rd:req, sym:req, t1:req, t2:req
+#if __LINUX_ARM_ARCH__ >= 7 || \
+    !defined(CONFIG_ARM_HAS_GROUP_RELOCS) || \
+    (defined(MODULE) && defined(CONFIG_ARM_MODULE_PLTS))
+	this_cpu_offset	\t1
+	mov_l		\t2, \sym
+	ldr		\rd, [\t1, \t2]
+#else
+	ldr_this_cpu_armv6 \rd, \sym
+#endif
+	.endm
+
 	/*
 	 * rev_l - byte-swap a 32-bit value
 	 *
@@ -626,4 +755,19 @@ THUMB(	orr	\reg , \reg , #PSR_T_BIT	)
 	.endif
 	.endm
 
+	/*
+	 * bl_r - branch and link to register
+	 *
+	 * @dst: target to branch to
+	 * @c: conditional opcode suffix
+	 */
+	.macro		bl_r, dst:req, c
+	.if		__LINUX_ARM_ARCH__ < 6
+	mov\c		lr, pc
+	mov\c		pc, \dst
+	.else
+	blx\c		\dst
+	.endif
+	.endm
+
 #endif /* __ASM_ASSEMBLER_H__ */
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index 5e56288e343b..a094f964c869 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -445,15 +445,10 @@ static inline void __sync_cache_range_r(volatile void *p, size_t size)
  *   however some exceptions may exist.  Caveat emptor.
  *
  * - The clobber list is dictated by the call to v7_flush_dcache_*.
- *   fp is preserved to the stack explicitly prior disabling the cache
- *   since adding it to the clobber list is incompatible with having
- *   CONFIG_FRAME_POINTER=y.  ip is saved as well if ever r12-clobbering
- *   trampoline are inserted by the linker and to keep sp 64-bit aligned.
  */
 #define v7_exit_coherency_flush(level) \
 	asm volatile( \
 	".arch	armv7-a \n\t" \
-	"stmfd	sp!, {fp, ip} \n\t" \
 	"mrc	p15, 0, r0, c1, c0, 0	@ get SCTLR \n\t" \
 	"bic	r0, r0, #"__stringify(CR_C)" \n\t" \
 	"mcr	p15, 0, r0, c1, c0, 0	@ set SCTLR \n\t" \
@@ -463,10 +458,9 @@ static inline void __sync_cache_range_r(volatile void *p, size_t size)
 	"bic	r0, r0, #(1 << 6)	@ disable local coherency \n\t" \
 	"mcr	p15, 0, r0, c1, c0, 1	@ set ACTLR \n\t" \
 	"isb	\n\t" \
-	"dsb	\n\t" \
-	"ldmfd	sp!, {fp, ip}" \
-	: : : "r0","r1","r2","r3","r4","r5","r6","r7", \
-	      "r9","r10","lr","memory" )
+	"dsb" \
+	: : : "r0","r1","r2","r3","r4","r5","r6", \
+	      "r9","r10","ip","lr","memory" )
 
 void flush_uprobe_xol_access(struct page *page, unsigned long uaddr,
 			     void *kaddr, unsigned long len);
diff --git a/arch/arm/include/asm/current.h b/arch/arm/include/asm/current.h
index 6bf0aad672c3..1e1178bf176d 100644
--- a/arch/arm/include/asm/current.h
+++ b/arch/arm/include/asm/current.h
@@ -8,25 +8,18 @@
 #define _ASM_ARM_CURRENT_H
 
 #ifndef __ASSEMBLY__
+#include <asm/insn.h>
 
 struct task_struct;
 
-static inline void set_current(struct task_struct *cur)
-{
-	if (!IS_ENABLED(CONFIG_CURRENT_POINTER_IN_TPIDRURO))
-		return;
-
-	/* Set TPIDRURO */
-	asm("mcr p15, 0, %0, c13, c0, 3" :: "r"(cur) : "memory");
-}
-
-#ifdef CONFIG_CURRENT_POINTER_IN_TPIDRURO
+extern struct task_struct *__current;
 
-static inline struct task_struct *get_current(void)
+static __always_inline __attribute_const__ struct task_struct *get_current(void)
 {
 	struct task_struct *cur;
 
 #if __has_builtin(__builtin_thread_pointer) && \
+    defined(CONFIG_CURRENT_POINTER_IN_TPIDRURO) && \
     !(defined(CONFIG_THUMB2_KERNEL) && \
       defined(CONFIG_CC_IS_CLANG) && CONFIG_CLANG_VERSION < 130001)
 	/*
@@ -39,16 +32,39 @@ static inline struct task_struct *get_current(void)
 	 * https://github.com/ClangBuiltLinux/linux/issues/1485
 	 */
 	cur = __builtin_thread_pointer();
+#elif defined(CONFIG_CURRENT_POINTER_IN_TPIDRURO) || defined(CONFIG_SMP)
+	asm("0:	mrc p15, 0, %0, c13, c0, 3			\n\t"
+#ifdef CONFIG_CPU_V6
+	    "1:							\n\t"
+	    "	.subsection 1					\n\t"
+#if defined(CONFIG_ARM_HAS_GROUP_RELOCS) && \
+    !(defined(MODULE) && defined(CONFIG_ARM_MODULE_PLTS))
+	    "2: " LOAD_SYM_ARMV6(%0, __current) "		\n\t"
+	    "	b	1b					\n\t"
 #else
-	asm("mrc p15, 0, %0, c13, c0, 3" : "=r"(cur));
+	    "2:	ldr	%0, 3f					\n\t"
+	    "	ldr	%0, [%0]				\n\t"
+	    "	b	1b					\n\t"
+	    "3:	.long	__current				\n\t"
+#endif
+	    "	.previous					\n\t"
+	    "	.pushsection \".alt.smp.init\", \"a\"		\n\t"
+	    "	.long	0b - .					\n\t"
+	    "	b	. + (2b - 0b)				\n\t"
+	    "	.popsection					\n\t"
+#endif
+	    : "=r"(cur));
+#elif __LINUX_ARM_ARCH__>= 7 || \
+      !defined(CONFIG_ARM_HAS_GROUP_RELOCS) || \
+      (defined(MODULE) && defined(CONFIG_ARM_MODULE_PLTS))
+	cur = __current;
+#else
+	asm(LOAD_SYM_ARMV6(%0, __current) : "=r"(cur));
 #endif
 	return cur;
 }
 
 #define current get_current()
-#else
-#include <asm-generic/current.h>
-#endif /* CONFIG_CURRENT_POINTER_IN_TPIDRURO */
 
 #endif /* __ASSEMBLY__ */
 
diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h
index b8102a6ddf16..d68101655b74 100644
--- a/arch/arm/include/asm/elf.h
+++ b/arch/arm/include/asm/elf.h
@@ -61,6 +61,9 @@ typedef struct user_fp elf_fpregset_t;
 #define R_ARM_MOVT_ABS		44
 #define R_ARM_MOVW_PREL_NC	45
 #define R_ARM_MOVT_PREL		46
+#define R_ARM_ALU_PC_G0_NC	57
+#define R_ARM_ALU_PC_G1_NC	59
+#define R_ARM_LDR_PC_G2		63
 
 #define R_ARM_THM_CALL		10
 #define R_ARM_THM_JUMP24	30
diff --git a/arch/arm/include/asm/entry-macro-multi.S b/arch/arm/include/asm/entry-macro-multi.S
deleted file mode 100644
index dfc6bfa43012..000000000000
--- a/arch/arm/include/asm/entry-macro-multi.S
+++ /dev/null
@@ -1,40 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <asm/assembler.h>
-
-/*
- * Interrupt handling.  Preserves r7, r8, r9
- */
-	.macro	arch_irq_handler_default
-	get_irqnr_preamble r6, lr
-1:	get_irqnr_and_base r0, r2, r6, lr
-	movne	r1, sp
-	@
-	@ routine called with r0 = irq number, r1 = struct pt_regs *
-	@
-	badrne	lr, 1b
-	bne	asm_do_IRQ
-
-#ifdef CONFIG_SMP
-	/*
-	 * XXX
-	 *
-	 * this macro assumes that irqstat (r2) and base (r6) are
-	 * preserved from get_irqnr_and_base above
-	 */
-	ALT_SMP(test_for_ipi r0, r2, r6, lr)
-	ALT_UP_B(9997f)
-	movne	r1, sp
-	badrne	lr, 1b
-	bne	do_IPI
-#endif
-9997:
-	.endm
-
-	.macro	arch_irq_handler, symbol_name
-	.align	5
-	.global \symbol_name
-\symbol_name:
-	mov	r8, lr
-	arch_irq_handler_default
-	ret	r8
-	.endm
diff --git a/arch/arm/include/asm/ftrace.h b/arch/arm/include/asm/ftrace.h
index a4dbac07e4ef..7e9251ca29fe 100644
--- a/arch/arm/include/asm/ftrace.h
+++ b/arch/arm/include/asm/ftrace.h
@@ -2,6 +2,8 @@
 #ifndef _ASM_ARM_FTRACE
 #define _ASM_ARM_FTRACE
 
+#define HAVE_FUNCTION_GRAPH_FP_TEST
+
 #ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
 #define ARCH_SUPPORTS_FTRACE_OPS 1
 #endif
@@ -48,7 +50,7 @@ void *return_address(unsigned int);
 
 static inline void *return_address(unsigned int level)
 {
-	return NULL;
+       return NULL;
 }
 
 #endif
diff --git a/arch/arm/include/asm/hardware/entry-macro-iomd.S b/arch/arm/include/asm/hardware/entry-macro-iomd.S
deleted file mode 100644
index f7692731e514..000000000000
--- a/arch/arm/include/asm/hardware/entry-macro-iomd.S
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- * arch/arm/include/asm/hardware/entry-macro-iomd.S
- *
- * Low-level IRQ helper macros for IOC/IOMD based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-/* IOC / IOMD based hardware */
-#include <asm/hardware/iomd.h>
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldrb	\irqstat, [\base, #IOMD_IRQREQB]	@ get high priority first
-		ldr	\tmp, =irq_prio_h
-		teq	\irqstat, #0
-#ifdef IOMD_BASE
-		ldrbeq	\irqstat, [\base, #IOMD_DMAREQ]	@ get dma
-		addeq	\tmp, \tmp, #256		@ irq_prio_h table size
-		teqeq	\irqstat, #0
-		bne	2406f
-#endif
-		ldrbeq	\irqstat, [\base, #IOMD_IRQREQA]	@ get low priority
-		addeq	\tmp, \tmp, #256		@ irq_prio_d table size
-		teqeq	\irqstat, #0
-#ifdef IOMD_IRQREQC
-		ldrbeq	\irqstat, [\base, #IOMD_IRQREQC]
-		addeq	\tmp, \tmp, #256		@ irq_prio_l table size
-		teqeq	\irqstat, #0
-#endif
-#ifdef IOMD_IRQREQD
-		ldrbeq	\irqstat, [\base, #IOMD_IRQREQD]
-		addeq	\tmp, \tmp, #256		@ irq_prio_lc table size
-		teqeq	\irqstat, #0
-#endif
-2406:		ldrbne	\irqnr, [\tmp, \irqstat]	@ get IRQ number
-		.endm
-
-/*
- * Interrupt table (incorporates priority).  Please note that we
- * rely on the order of these tables (see above code).
- */
-		.align	5
-irq_prio_h:	.byte	 0, 8, 9, 8,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	12, 8, 9, 8,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	14,14,14,14,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	14,14,14,14,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
-		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
-#ifdef IOMD_BASE
-irq_prio_d:	.byte	 0,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	20,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	23,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	23,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
-#endif
-irq_prio_l:	.byte	 0, 0, 1, 0, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3
-		.byte	 4, 0, 1, 0, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3
-		.byte	 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5
-		.byte	 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5
-		.byte	 6, 6, 6, 6, 6, 6, 6, 6, 3, 3, 3, 3, 3, 3, 3, 3
-		.byte	 6, 6, 6, 6, 6, 6, 6, 6, 3, 3, 3, 3, 3, 3, 3, 3
-		.byte	 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5
-		.byte	 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5
-		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
-		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
-		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
-		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
-		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
-		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
-		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
-		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
-#ifdef IOMD_IRQREQC
-irq_prio_lc:	.byte	24,24,25,24,26,26,26,26,27,27,27,27,27,27,27,27
-		.byte	28,24,25,24,26,26,26,26,27,27,27,27,27,27,27,27
-		.byte	29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29
-		.byte	29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29
-		.byte	30,30,30,30,30,30,30,30,27,27,27,27,27,27,27,27
-		.byte	30,30,30,30,30,30,30,30,27,27,27,27,27,27,27,27
-		.byte	29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29
-		.byte	29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29
-		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
-		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
-		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
-		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
-		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
-		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
-		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
-		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
-#endif
-#ifdef IOMD_IRQREQD
-irq_prio_ld:	.byte	40,40,41,40,42,42,42,42,43,43,43,43,43,43,43,43
-		.byte	44,40,41,40,42,42,42,42,43,43,43,43,43,43,43,43
-		.byte	45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45
-		.byte	45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45
-		.byte	46,46,46,46,46,46,46,46,43,43,43,43,43,43,43,43
-		.byte	46,46,46,46,46,46,46,46,43,43,43,43,43,43,43,43
-		.byte	45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45
-		.byte	45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45
-		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
-		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
-		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
-		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
-		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
-		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
-		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
-		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
-#endif
-
diff --git a/arch/arm/include/asm/insn.h b/arch/arm/include/asm/insn.h
index 5475cbf9fb6b..faf3d1c28368 100644
--- a/arch/arm/include/asm/insn.h
+++ b/arch/arm/include/asm/insn.h
@@ -2,6 +2,23 @@
 #ifndef __ASM_ARM_INSN_H
 #define __ASM_ARM_INSN_H
 
+#include <linux/types.h>
+
+/*
+ * Avoid a literal load by emitting a sequence of ADD/LDR instructions with the
+ * appropriate relocations. The combined sequence has a range of -/+ 256 MiB,
+ * which should be sufficient for the core kernel as well as modules loaded
+ * into the module region. (Not supported by LLD before release 14)
+ */
+#define LOAD_SYM_ARMV6(reg, sym)					\
+	"	.globl	" #sym "				\n\t"	\
+	"	.reloc	10f, R_ARM_ALU_PC_G0_NC, " #sym "	\n\t"	\
+	"	.reloc	11f, R_ARM_ALU_PC_G1_NC, " #sym "	\n\t"	\
+	"	.reloc	12f, R_ARM_LDR_PC_G2, " #sym "		\n\t"	\
+	"10:	sub	" #reg ", pc, #8			\n\t"	\
+	"11:	sub	" #reg ", " #reg ", #4			\n\t"	\
+	"12:	ldr	" #reg ", [" #reg ", #0]		\n\t"
+
 static inline unsigned long
 arm_gen_nop(void)
 {
diff --git a/arch/arm/include/asm/irq.h b/arch/arm/include/asm/irq.h
index 1cbcc462b07e..a7c2337b0c7d 100644
--- a/arch/arm/include/asm/irq.h
+++ b/arch/arm/include/asm/irq.h
@@ -26,7 +26,6 @@
 struct irqaction;
 struct pt_regs;
 
-extern void asm_do_IRQ(unsigned int, struct pt_regs *);
 void handle_IRQ(unsigned int, struct pt_regs *);
 void init_IRQ(void);
 
diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h
index eec0c0bda766..9349e7a82c9c 100644
--- a/arch/arm/include/asm/mach/arch.h
+++ b/arch/arm/include/asm/mach/arch.h
@@ -56,9 +56,7 @@ struct machine_desc {
 	void			(*init_time)(void);
 	void			(*init_machine)(void);
 	void			(*init_late)(void);
-#ifdef CONFIG_GENERIC_IRQ_MULTI_HANDLER
 	void			(*handle_irq)(struct pt_regs *);
-#endif
 	void			(*restart)(enum reboot_mode, const char *);
 };
 
diff --git a/arch/arm/include/asm/mmu.h b/arch/arm/include/asm/mmu.h
index 1592a4264488..e049723840d3 100644
--- a/arch/arm/include/asm/mmu.h
+++ b/arch/arm/include/asm/mmu.h
@@ -10,7 +10,7 @@ typedef struct {
 #else
 	int		switch_pending;
 #endif
-	unsigned int	vmalloc_seq;
+	atomic_t	vmalloc_seq;
 	unsigned long	sigpage;
 #ifdef CONFIG_VDSO
 	unsigned long	vdso;
diff --git a/arch/arm/include/asm/mmu_context.h b/arch/arm/include/asm/mmu_context.h
index 84e58956fcab..db2cb06aa8cf 100644
--- a/arch/arm/include/asm/mmu_context.h
+++ b/arch/arm/include/asm/mmu_context.h
@@ -23,6 +23,16 @@
 
 void __check_vmalloc_seq(struct mm_struct *mm);
 
+#ifdef CONFIG_MMU
+static inline void check_vmalloc_seq(struct mm_struct *mm)
+{
+	if (!IS_ENABLED(CONFIG_ARM_LPAE) &&
+	    unlikely(atomic_read(&mm->context.vmalloc_seq) !=
+		     atomic_read(&init_mm.context.vmalloc_seq)))
+		__check_vmalloc_seq(mm);
+}
+#endif
+
 #ifdef CONFIG_CPU_HAS_ASID
 
 void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk);
@@ -52,8 +62,7 @@ static inline void a15_erratum_get_cpumask(int this_cpu, struct mm_struct *mm,
 static inline void check_and_switch_context(struct mm_struct *mm,
 					    struct task_struct *tsk)
 {
-	if (unlikely(mm->context.vmalloc_seq != init_mm.context.vmalloc_seq))
-		__check_vmalloc_seq(mm);
+	check_vmalloc_seq(mm);
 
 	if (irqs_disabled())
 		/*
@@ -129,6 +138,15 @@ switch_mm(struct mm_struct *prev, struct mm_struct *next,
 #endif
 }
 
+#ifdef CONFIG_VMAP_STACK
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+	if (mm != &init_mm)
+		check_vmalloc_seq(mm);
+}
+#define enter_lazy_tlb enter_lazy_tlb
+#endif
+
 #include <asm-generic/mmu_context.h>
 
 #endif
diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h
index 11b058a72a5b..5fcc8a600e36 100644
--- a/arch/arm/include/asm/page.h
+++ b/arch/arm/include/asm/page.h
@@ -147,6 +147,9 @@ extern void copy_page(void *to, const void *from);
 #include <asm/pgtable-3level-types.h>
 #else
 #include <asm/pgtable-2level-types.h>
+#ifdef CONFIG_VMAP_STACK
+#define ARCH_PAGE_TABLE_SYNC_MASK	PGTBL_PMD_MODIFIED
+#endif
 #endif
 
 #endif /* CONFIG_MMU */
diff --git a/arch/arm/include/asm/paravirt_api_clock.h b/arch/arm/include/asm/paravirt_api_clock.h
new file mode 100644
index 000000000000..65ac7cee0dad
--- /dev/null
+++ b/arch/arm/include/asm/paravirt_api_clock.h
@@ -0,0 +1 @@
+#include <asm/paravirt.h>
diff --git a/arch/arm/include/asm/percpu.h b/arch/arm/include/asm/percpu.h
index e2fcb3cfd3de..7545c87c251f 100644
--- a/arch/arm/include/asm/percpu.h
+++ b/arch/arm/include/asm/percpu.h
@@ -5,20 +5,27 @@
 #ifndef _ASM_ARM_PERCPU_H_
 #define _ASM_ARM_PERCPU_H_
 
+#include <asm/insn.h>
+
 register unsigned long current_stack_pointer asm ("sp");
 
 /*
  * Same as asm-generic/percpu.h, except that we store the per cpu offset
  * in the TPIDRPRW. TPIDRPRW only exists on V6K and V7
  */
-#if defined(CONFIG_SMP) && !defined(CONFIG_CPU_V6)
+#ifdef CONFIG_SMP
 static inline void set_my_cpu_offset(unsigned long off)
 {
+	extern unsigned int smp_on_up;
+
+	if (IS_ENABLED(CONFIG_CPU_V6) && !smp_on_up)
+		return;
+
 	/* Set TPIDRPRW */
 	asm volatile("mcr p15, 0, %0, c13, c0, 4" : : "r" (off) : "memory");
 }
 
-static inline unsigned long __my_cpu_offset(void)
+static __always_inline unsigned long __my_cpu_offset(void)
 {
 	unsigned long off;
 
@@ -27,8 +34,28 @@ static inline unsigned long __my_cpu_offset(void)
 	 * We want to allow caching the value, so avoid using volatile and
 	 * instead use a fake stack read to hazard against barrier().
 	 */
-	asm("mrc p15, 0, %0, c13, c0, 4" : "=r" (off)
-		: "Q" (*(const unsigned long *)current_stack_pointer));
+	asm("0:	mrc p15, 0, %0, c13, c0, 4			\n\t"
+#ifdef CONFIG_CPU_V6
+	    "1:							\n\t"
+	    "	.subsection 1					\n\t"
+#if defined(CONFIG_ARM_HAS_GROUP_RELOCS) && \
+    !(defined(MODULE) && defined(CONFIG_ARM_MODULE_PLTS))
+	    "2: " LOAD_SYM_ARMV6(%0, __per_cpu_offset) "	\n\t"
+	    "	b	1b					\n\t"
+#else
+	    "2: ldr	%0, 3f					\n\t"
+	    "	ldr	%0, [%0]				\n\t"
+	    "	b	1b					\n\t"
+	    "3:	.long	__per_cpu_offset			\n\t"
+#endif
+	    "	.previous					\n\t"
+	    "	.pushsection \".alt.smp.init\", \"a\"		\n\t"
+	    "	.long	0b - .					\n\t"
+	    "	b	. + (2b - 0b)				\n\t"
+	    "	.popsection					\n\t"
+#endif
+	     : "=r" (off)
+	     : "Q" (*(const unsigned long *)current_stack_pointer));
 
 	return off;
 }
diff --git a/arch/arm/include/asm/pgtable-2level.h b/arch/arm/include/asm/pgtable-2level.h
index 70fe69bdcce2..92abd4cd8ca2 100644
--- a/arch/arm/include/asm/pgtable-2level.h
+++ b/arch/arm/include/asm/pgtable-2level.h
@@ -208,6 +208,8 @@ static inline pmd_t *pmd_offset(pud_t *pud, unsigned long addr)
 }
 #define pmd_offset pmd_offset
 
+#define pmd_pfn(pmd)		(__phys_to_pfn(pmd_val(pmd) & PHYS_MASK))
+
 #define pmd_large(pmd)		(pmd_val(pmd) & 2)
 #define pmd_leaf(pmd)		(pmd_val(pmd) & 2)
 #define pmd_bad(pmd)		(pmd_val(pmd) & 2)
diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h
index f16cbbd5cda4..7c1c90d9f582 100644
--- a/arch/arm/include/asm/smp.h
+++ b/arch/arm/include/asm/smp.h
@@ -25,11 +25,6 @@ struct seq_file;
 extern void show_ipi_list(struct seq_file *, int);
 
 /*
- * Called from assembly code, this handles an IPI.
- */
-asmlinkage void do_IPI(int ipinr, struct pt_regs *regs);
-
-/*
  * Called from C code, this handles an IPI.
  */
 void handle_IPI(int ipinr, struct pt_regs *regs);
diff --git a/arch/arm/include/asm/spectre.h b/arch/arm/include/asm/spectre.h
new file mode 100644
index 000000000000..85f9e538fb32
--- /dev/null
+++ b/arch/arm/include/asm/spectre.h
@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __ASM_SPECTRE_H
+#define __ASM_SPECTRE_H
+
+enum {
+	SPECTRE_UNAFFECTED,
+	SPECTRE_MITIGATED,
+	SPECTRE_VULNERABLE,
+};
+
+enum {
+	__SPECTRE_V2_METHOD_BPIALL,
+	__SPECTRE_V2_METHOD_ICIALLU,
+	__SPECTRE_V2_METHOD_SMC,
+	__SPECTRE_V2_METHOD_HVC,
+	__SPECTRE_V2_METHOD_LOOP8,
+};
+
+enum {
+	SPECTRE_V2_METHOD_BPIALL = BIT(__SPECTRE_V2_METHOD_BPIALL),
+	SPECTRE_V2_METHOD_ICIALLU = BIT(__SPECTRE_V2_METHOD_ICIALLU),
+	SPECTRE_V2_METHOD_SMC = BIT(__SPECTRE_V2_METHOD_SMC),
+	SPECTRE_V2_METHOD_HVC = BIT(__SPECTRE_V2_METHOD_HVC),
+	SPECTRE_V2_METHOD_LOOP8 = BIT(__SPECTRE_V2_METHOD_LOOP8),
+};
+
+#ifdef CONFIG_GENERIC_CPU_VULNERABILITIES
+void spectre_v2_update_state(unsigned int state, unsigned int methods);
+#else
+static inline void spectre_v2_update_state(unsigned int state,
+					   unsigned int methods)
+{}
+#endif
+
+int spectre_bhb_update_vectors(unsigned int method);
+
+#endif
diff --git a/arch/arm/include/asm/stacktrace.h b/arch/arm/include/asm/stacktrace.h
index 8f54f9ad8a9b..3e78f921b8b2 100644
--- a/arch/arm/include/asm/stacktrace.h
+++ b/arch/arm/include/asm/stacktrace.h
@@ -14,6 +14,9 @@ struct stackframe {
 	unsigned long sp;
 	unsigned long lr;
 	unsigned long pc;
+
+	/* address of the LR value on the stack */
+	unsigned long *lr_addr;
 #ifdef CONFIG_KRETPROBES
 	struct llist_node *kr_cur;
 	struct task_struct *tsk;
@@ -36,5 +39,7 @@ void arm_get_current_stackframe(struct pt_regs *regs, struct stackframe *frame)
 extern int unwind_frame(struct stackframe *frame);
 extern void walk_stackframe(struct stackframe *frame,
 			    int (*fn)(struct stackframe *, void *), void *data);
+extern void dump_mem(const char *lvl, const char *str, unsigned long bottom,
+		     unsigned long top);
 
 #endif	/* __ASM_STACKTRACE_H */
diff --git a/arch/arm/include/asm/switch_to.h b/arch/arm/include/asm/switch_to.h
index 61e4a3c4ca6e..9372348516ce 100644
--- a/arch/arm/include/asm/switch_to.h
+++ b/arch/arm/include/asm/switch_to.h
@@ -3,6 +3,7 @@
 #define __ASM_ARM_SWITCH_TO_H
 
 #include <linux/thread_info.h>
+#include <asm/smp_plat.h>
 
 /*
  * For v7 SMP cores running a preemptible kernel we may be pre-empted
@@ -26,7 +27,7 @@ extern struct task_struct *__switch_to(struct task_struct *, struct thread_info
 #define switch_to(prev,next,last)					\
 do {									\
 	__complete_pending_tlbi();					\
-	if (IS_ENABLED(CONFIG_CURRENT_POINTER_IN_TPIDRURO))		\
+	if (IS_ENABLED(CONFIG_CURRENT_POINTER_IN_TPIDRURO) || is_smp())	\
 		__this_cpu_write(__entry_task, next);			\
 	last = __switch_to(prev,task_thread_info(prev), task_thread_info(next));	\
 } while (0)
diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
index 164e15f26485..aecc403b2880 100644
--- a/arch/arm/include/asm/thread_info.h
+++ b/arch/arm/include/asm/thread_info.h
@@ -25,6 +25,14 @@
 #define THREAD_SIZE		(PAGE_SIZE << THREAD_SIZE_ORDER)
 #define THREAD_START_SP		(THREAD_SIZE - 8)
 
+#ifdef CONFIG_VMAP_STACK
+#define THREAD_ALIGN		(2 * THREAD_SIZE)
+#else
+#define THREAD_ALIGN		THREAD_SIZE
+#endif
+
+#define OVERFLOW_STACK_SIZE	SZ_4K
+
 #ifndef __ASSEMBLY__
 
 struct task_struct;
@@ -54,9 +62,6 @@ struct cpu_context_save {
 struct thread_info {
 	unsigned long		flags;		/* low level flags */
 	int			preempt_count;	/* 0 => preemptable, <0 => bug */
-#ifndef CONFIG_THREAD_INFO_IN_TASK
-	struct task_struct	*task;		/* main task structure */
-#endif
 	__u32			cpu;		/* cpu */
 	__u32			cpu_domain;	/* cpu domain */
 	struct cpu_context_save	cpu_context;	/* cpu context */
@@ -72,39 +77,15 @@ struct thread_info {
 
 #define INIT_THREAD_INFO(tsk)						\
 {									\
-	INIT_THREAD_INFO_TASK(tsk)					\
 	.flags		= 0,						\
 	.preempt_count	= INIT_PREEMPT_COUNT,				\
 }
 
-#ifdef CONFIG_THREAD_INFO_IN_TASK
-#define INIT_THREAD_INFO_TASK(tsk)
-
 static inline struct task_struct *thread_task(struct thread_info* ti)
 {
 	return (struct task_struct *)ti;
 }
 
-#else
-#define INIT_THREAD_INFO_TASK(tsk)	.task = &(tsk),
-
-static inline struct task_struct *thread_task(struct thread_info* ti)
-{
-	return ti->task;
-}
-
-/*
- * how to get the thread information struct from C
- */
-static inline struct thread_info *current_thread_info(void) __attribute_const__;
-
-static inline struct thread_info *current_thread_info(void)
-{
-	return (struct thread_info *)
-		(current_stack_pointer & ~(THREAD_SIZE - 1));
-}
-#endif
-
 #define thread_saved_pc(tsk)	\
 	((unsigned long)(task_thread_info(tsk)->cpu_context.pc))
 #define thread_saved_sp(tsk)	\
diff --git a/arch/arm/include/asm/tls.h b/arch/arm/include/asm/tls.h
index c3296499176c..3dcd0f71a0da 100644
--- a/arch/arm/include/asm/tls.h
+++ b/arch/arm/include/asm/tls.h
@@ -18,21 +18,32 @@
 	.endm
 
 	.macro switch_tls_v6, base, tp, tpuser, tmp1, tmp2
-	ldr	\tmp1, =elf_hwcap
-	ldr	\tmp1, [\tmp1, #0]
+#ifdef CONFIG_SMP
+ALT_SMP(nop)
+ALT_UP_B(.L0_\@)
+	.subsection 1
+#endif
+.L0_\@:
+	ldr_va	\tmp1, elf_hwcap
 	mov	\tmp2, #0xffff0fff
 	tst	\tmp1, #HWCAP_TLS		@ hardware TLS available?
 	streq	\tp, [\tmp2, #-15]		@ set TLS value at 0xffff0ff0
-	mrcne	p15, 0, \tmp2, c13, c0, 2	@ get the user r/w register
-	mcrne	p15, 0, \tp, c13, c0, 3		@ yes, set TLS register
-	mcrne	p15, 0, \tpuser, c13, c0, 2	@ set user r/w register
-	strne	\tmp2, [\base, #TI_TP_VALUE + 4] @ save it
+	beq	.L2_\@
+	mcr	p15, 0, \tp, c13, c0, 3		@ yes, set TLS register
+#ifdef CONFIG_SMP
+	b	.L1_\@
+	.previous
+#endif
+.L1_\@: switch_tls_v6k \base, \tp, \tpuser, \tmp1, \tmp2
+.L2_\@:
 	.endm
 
 	.macro switch_tls_software, base, tp, tpuser, tmp1, tmp2
 	mov	\tmp1, #0xffff0fff
 	str	\tp, [\tmp1, #-15]		@ set TLS value at 0xffff0ff0
 	.endm
+#else
+#include <asm/smp_plat.h>
 #endif
 
 #ifdef CONFIG_TLS_REG_EMUL
@@ -43,7 +54,7 @@
 #elif defined(CONFIG_CPU_V6)
 #define tls_emu		0
 #define has_tls_reg		(elf_hwcap & HWCAP_TLS)
-#define defer_tls_reg_update	0
+#define defer_tls_reg_update	is_smp()
 #define switch_tls	switch_tls_v6
 #elif defined(CONFIG_CPU_32v6K)
 #define tls_emu		0
@@ -81,11 +92,11 @@ static inline void set_tls(unsigned long val)
 	 */
 	barrier();
 
-	if (!tls_emu && !defer_tls_reg_update) {
-		if (has_tls_reg) {
+	if (!tls_emu) {
+		if (has_tls_reg && !defer_tls_reg_update) {
 			asm("mcr p15, 0, %0, c13, c0, 3"
 			    : : "r" (val));
-		} else {
+		} else if (!has_tls_reg) {
 #ifdef CONFIG_KUSER_HELPERS
 			/*
 			 * User space must never try to access this
diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h
index 32dbfd81f42a..2fcbec9c306c 100644
--- a/arch/arm/include/asm/uaccess.h
+++ b/arch/arm/include/asm/uaccess.h
@@ -56,21 +56,6 @@ extern int __put_user_bad(void);
 #ifdef CONFIG_MMU
 
 /*
- * We use 33-bit arithmetic here.  Success returns zero, failure returns
- * addr_limit.  We take advantage that addr_limit will be zero for KERNEL_DS,
- * so this will always return success in that case.
- */
-#define __range_ok(addr, size) ({ \
-	unsigned long flag, roksum; \
-	__chk_user_ptr(addr);	\
-	__asm__(".syntax unified\n" \
-		"adds %1, %2, %3; sbcscc %1, %1, %0; movcc %0, #0" \
-		: "=&r" (flag), "=&r" (roksum) \
-		: "r" (addr), "Ir" (size), "0" (TASK_SIZE) \
-		: "cc"); \
-	flag; })
-
-/*
  * This is a type: either unsigned long, if the argument fits into
  * that type, or otherwise unsigned long long.
  */
@@ -241,15 +226,12 @@ extern int __put_user_8(void *, unsigned long long);
 
 #else /* CONFIG_MMU */
 
-#define __addr_ok(addr)		((void)(addr), 1)
-#define __range_ok(addr, size)	((void)(addr), 0)
-
 #define get_user(x, p)	__get_user(x, p)
 #define __put_user_check __put_user_nocheck
 
 #endif /* CONFIG_MMU */
 
-#define access_ok(addr, size)	(__range_ok(addr, size) == 0)
+#include <asm-generic/access_ok.h>
 
 #ifdef CONFIG_CPU_SPECTRE
 /*
@@ -476,8 +458,6 @@ do {									\
 	: "r" (x), "i" (-EFAULT)				\
 	: "cc")
 
-#define HAVE_GET_KERNEL_NOFAULT
-
 #define __get_kernel_nofault(dst, src, type, err_label)			\
 do {									\
 	const type *__pk_ptr = (src);					\
diff --git a/arch/arm/include/asm/v7m.h b/arch/arm/include/asm/v7m.h
index 2cb00d15831b..4512f7e1918f 100644
--- a/arch/arm/include/asm/v7m.h
+++ b/arch/arm/include/asm/v7m.h
@@ -13,6 +13,7 @@
 #define V7M_SCB_ICSR_PENDSVSET			(1 << 28)
 #define V7M_SCB_ICSR_PENDSVCLR			(1 << 27)
 #define V7M_SCB_ICSR_RETTOBASE			(1 << 11)
+#define V7M_SCB_ICSR_VECTACTIVE			0x000001ff
 
 #define V7M_SCB_VTOR			0x08
 
@@ -38,7 +39,7 @@
 #define V7M_SCB_SHCSR_MEMFAULTENA		(1 << 16)
 
 #define V7M_xPSR_FRAMEPTRALIGN			0x00000200
-#define V7M_xPSR_EXCEPTIONNO			0x000001ff
+#define V7M_xPSR_EXCEPTIONNO			V7M_SCB_ICSR_VECTACTIVE
 
 /*
  * When branching to an address that has bits [31:28] == 0xf an exception return
diff --git a/arch/arm/include/asm/vmlinux.lds.h b/arch/arm/include/asm/vmlinux.lds.h
index 4a91428c324d..fad45c884e98 100644
--- a/arch/arm/include/asm/vmlinux.lds.h
+++ b/arch/arm/include/asm/vmlinux.lds.h
@@ -26,6 +26,19 @@
 #define ARM_MMU_DISCARD(x)	x
 #endif
 
+/*
+ * ld.lld does not support NOCROSSREFS:
+ * https://github.com/ClangBuiltLinux/linux/issues/1609
+ */
+#ifdef CONFIG_LD_IS_LLD
+#define NOCROSSREFS
+#endif
+
+/* Set start/end symbol names to the LMA for the section */
+#define ARM_LMA(sym, section)						\
+	sym##_start = LOADADDR(section);				\
+	sym##_end = LOADADDR(section) + SIZEOF(section)
+
 #define PROC_INFO							\
 		. = ALIGN(4);						\
 		__proc_info_begin = .;					\
@@ -110,19 +123,31 @@
  * only thing that matters is their relative offsets
  */
 #define ARM_VECTORS							\
-	__vectors_start = .;						\
-	.vectors 0xffff0000 : AT(__vectors_start) {			\
-		*(.vectors)						\
+	__vectors_lma = .;						\
+	OVERLAY 0xffff0000 : NOCROSSREFS AT(__vectors_lma) {		\
+		.vectors {						\
+			*(.vectors)					\
+		}							\
+		.vectors.bhb.loop8 {					\
+			*(.vectors.bhb.loop8)				\
+		}							\
+		.vectors.bhb.bpiall {					\
+			*(.vectors.bhb.bpiall)				\
+		}							\
 	}								\
-	. = __vectors_start + SIZEOF(.vectors);				\
-	__vectors_end = .;						\
+	ARM_LMA(__vectors, .vectors);					\
+	ARM_LMA(__vectors_bhb_loop8, .vectors.bhb.loop8);		\
+	ARM_LMA(__vectors_bhb_bpiall, .vectors.bhb.bpiall);		\
+	. = __vectors_lma + SIZEOF(.vectors) +				\
+		SIZEOF(.vectors.bhb.loop8) +				\
+		SIZEOF(.vectors.bhb.bpiall);				\
 									\
-	__stubs_start = .;						\
-	.stubs ADDR(.vectors) + 0x1000 : AT(__stubs_start) {		\
+	__stubs_lma = .;						\
+	.stubs ADDR(.vectors) + 0x1000 : AT(__stubs_lma) {		\
 		*(.stubs)						\
 	}								\
-	. = __stubs_start + SIZEOF(.stubs);				\
-	__stubs_end = .;						\
+	ARM_LMA(__stubs, .stubs);					\
+	. = __stubs_lma + SIZEOF(.stubs);				\
 									\
 	PROVIDE(vector_fiq_offset = vector_fiq - ADDR(.vectors));
 
diff --git a/arch/arm/include/asm/xor.h b/arch/arm/include/asm/xor.h
index aefddec79286..669cad5194d3 100644
--- a/arch/arm/include/asm/xor.h
+++ b/arch/arm/include/asm/xor.h
@@ -44,7 +44,8 @@
 		: "0" (dst), "r" (a1), "r" (a2), "r" (a3), "r" (a4))
 
 static void
-xor_arm4regs_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
+xor_arm4regs_2(unsigned long bytes, unsigned long * __restrict p1,
+	       const unsigned long * __restrict p2)
 {
 	unsigned int lines = bytes / sizeof(unsigned long) / 4;
 	register unsigned int a1 __asm__("r4");
@@ -64,8 +65,9 @@ xor_arm4regs_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
 }
 
 static void
-xor_arm4regs_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-		unsigned long *p3)
+xor_arm4regs_3(unsigned long bytes, unsigned long * __restrict p1,
+	       const unsigned long * __restrict p2,
+	       const unsigned long * __restrict p3)
 {
 	unsigned int lines = bytes / sizeof(unsigned long) / 4;
 	register unsigned int a1 __asm__("r4");
@@ -86,8 +88,10 @@ xor_arm4regs_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
 }
 
 static void
-xor_arm4regs_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-		unsigned long *p3, unsigned long *p4)
+xor_arm4regs_4(unsigned long bytes, unsigned long * __restrict p1,
+	       const unsigned long * __restrict p2,
+	       const unsigned long * __restrict p3,
+	       const unsigned long * __restrict p4)
 {
 	unsigned int lines = bytes / sizeof(unsigned long) / 2;
 	register unsigned int a1 __asm__("r8");
@@ -105,8 +109,11 @@ xor_arm4regs_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
 }
 
 static void
-xor_arm4regs_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-		unsigned long *p3, unsigned long *p4, unsigned long *p5)
+xor_arm4regs_5(unsigned long bytes, unsigned long * __restrict p1,
+	       const unsigned long * __restrict p2,
+	       const unsigned long * __restrict p3,
+	       const unsigned long * __restrict p4,
+	       const unsigned long * __restrict p5)
 {
 	unsigned int lines = bytes / sizeof(unsigned long) / 2;
 	register unsigned int a1 __asm__("r8");
@@ -146,7 +153,8 @@ static struct xor_block_template xor_block_arm4regs = {
 extern struct xor_block_template const xor_block_neon_inner;
 
 static void
-xor_neon_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
+xor_neon_2(unsigned long bytes, unsigned long * __restrict p1,
+	   const unsigned long * __restrict p2)
 {
 	if (in_interrupt()) {
 		xor_arm4regs_2(bytes, p1, p2);
@@ -158,8 +166,9 @@ xor_neon_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
 }
 
 static void
-xor_neon_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-		unsigned long *p3)
+xor_neon_3(unsigned long bytes, unsigned long * __restrict p1,
+	   const unsigned long * __restrict p2,
+	   const unsigned long * __restrict p3)
 {
 	if (in_interrupt()) {
 		xor_arm4regs_3(bytes, p1, p2, p3);
@@ -171,8 +180,10 @@ xor_neon_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
 }
 
 static void
-xor_neon_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-		unsigned long *p3, unsigned long *p4)
+xor_neon_4(unsigned long bytes, unsigned long * __restrict p1,
+	   const unsigned long * __restrict p2,
+	   const unsigned long * __restrict p3,
+	   const unsigned long * __restrict p4)
 {
 	if (in_interrupt()) {
 		xor_arm4regs_4(bytes, p1, p2, p3, p4);
@@ -184,8 +195,11 @@ xor_neon_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
 }
 
 static void
-xor_neon_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-		unsigned long *p3, unsigned long *p4, unsigned long *p5)
+xor_neon_5(unsigned long bytes, unsigned long * __restrict p1,
+	   const unsigned long * __restrict p2,
+	   const unsigned long * __restrict p3,
+	   const unsigned long * __restrict p4,
+	   const unsigned long * __restrict p5)
 {
 	if (in_interrupt()) {
 		xor_arm4regs_5(bytes, p1, p2, p3, p4, p5);
diff --git a/arch/arm/include/uapi/asm/signal.h b/arch/arm/include/uapi/asm/signal.h
index c9a3ea1d8d41..9e2178420db2 100644
--- a/arch/arm/include/uapi/asm/signal.h
+++ b/arch/arm/include/uapi/asm/signal.h
@@ -93,7 +93,7 @@ struct sigaction {
 typedef struct sigaltstack {
 	void __user *ss_sp;
 	int ss_flags;
-	size_t ss_size;
+	__kernel_size_t ss_size;
 } stack_t;
 
 
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index ae295a3bcfef..553866751e1a 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -10,6 +10,7 @@ ifdef CONFIG_FUNCTION_TRACER
 CFLAGS_REMOVE_ftrace.o = -pg
 CFLAGS_REMOVE_insn.o = -pg
 CFLAGS_REMOVE_patch.o = -pg
+CFLAGS_REMOVE_unwind.o = -pg
 endif
 
 CFLAGS_REMOVE_return_address.o = -pg
@@ -106,4 +107,6 @@ endif
 
 obj-$(CONFIG_HAVE_ARM_SMCCC)	+= smccc-call.o
 
+obj-$(CONFIG_GENERIC_CPU_VULNERABILITIES) += spectre.o
+
 extra-y := $(head-y) vmlinux.lds
diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c
index 645845e4982a..2c8d76fd7c66 100644
--- a/arch/arm/kernel/asm-offsets.c
+++ b/arch/arm/kernel/asm-offsets.c
@@ -43,9 +43,6 @@ int main(void)
   BLANK();
   DEFINE(TI_FLAGS,		offsetof(struct thread_info, flags));
   DEFINE(TI_PREEMPT,		offsetof(struct thread_info, preempt_count));
-#ifndef CONFIG_THREAD_INFO_IN_TASK
-  DEFINE(TI_TASK,		offsetof(struct thread_info, task));
-#endif
   DEFINE(TI_CPU,		offsetof(struct thread_info, cpu));
   DEFINE(TI_CPU_DOMAIN,		offsetof(struct thread_info, cpu_domain));
   DEFINE(TI_CPU_SAVE,		offsetof(struct thread_info, cpu_context));
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 5cd057859fe9..06508698abb8 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -19,9 +19,6 @@
 #include <asm/glue-df.h>
 #include <asm/glue-pf.h>
 #include <asm/vfpmacros.h>
-#ifndef CONFIG_GENERIC_IRQ_MULTI_HANDLER
-#include <mach/entry-macro.S>
-#endif
 #include <asm/thread_notify.h>
 #include <asm/unwind.h>
 #include <asm/unistd.h>
@@ -30,19 +27,35 @@
 #include <asm/uaccess-asm.h>
 
 #include "entry-header.S"
-#include <asm/entry-macro-multi.S>
 #include <asm/probes.h>
 
 /*
  * Interrupt handling.
  */
-	.macro	irq_handler
-#ifdef CONFIG_GENERIC_IRQ_MULTI_HANDLER
-	mov	r0, sp
-	bl	generic_handle_arch_irq
-#else
-	arch_irq_handler_default
+	.macro	irq_handler, from_user:req
+	mov	r1, sp
+	ldr_this_cpu r2, irq_stack_ptr, r2, r3
+	.if	\from_user == 0
+	@
+	@ If we took the interrupt while running in the kernel, we may already
+	@ be using the IRQ stack, so revert to the original value in that case.
+	@
+	subs	r3, r2, r1		@ SP above bottom of IRQ stack?
+	rsbscs	r3, r3, #THREAD_SIZE	@ ... and below the top?
+#ifdef CONFIG_VMAP_STACK
+	ldr_va	r3, high_memory, cc	@ End of the linear region
+	cmpcc	r3, r1			@ Stack pointer was below it?
 #endif
+	bcc	0f			@ If not, switch to the IRQ stack
+	mov	r0, r1
+	bl	generic_handle_arch_irq
+	b	1f
+0:
+	.endif
+
+	mov_l	r0, generic_handle_arch_irq
+	bl	call_with_stack
+1:
 	.endm
 
 	.macro	pabt_helper
@@ -140,27 +153,35 @@ ENDPROC(__und_invalid)
 #define SPFIX(code...)
 #endif
 
-	.macro	svc_entry, stack_hole=0, trace=1, uaccess=1
+	.macro	svc_entry, stack_hole=0, trace=1, uaccess=1, overflow_check=1
  UNWIND(.fnstart		)
- UNWIND(.save {r0 - pc}		)
-	sub	sp, sp, #(SVC_REGS_SIZE + \stack_hole - 4)
+	sub	sp, sp, #(SVC_REGS_SIZE + \stack_hole)
+ THUMB(	add	sp, r1		)	@ get SP in a GPR without
+ THUMB(	sub	r1, sp, r1	)	@ using a temp register
+
+	.if	\overflow_check
+ UNWIND(.save	{r0 - pc}	)
+	do_overflow_check (SVC_REGS_SIZE + \stack_hole)
+	.endif
+
 #ifdef CONFIG_THUMB2_KERNEL
- SPFIX(	str	r0, [sp]	)	@ temporarily saved
- SPFIX(	mov	r0, sp		)
- SPFIX(	tst	r0, #4		)	@ test original stack alignment
- SPFIX(	ldr	r0, [sp]	)	@ restored
+	tst	r1, #4			@ test stack pointer alignment
+	sub	r1, sp, r1		@ restore original R1
+	sub	sp, r1			@ restore original SP
 #else
  SPFIX(	tst	sp, #4		)
 #endif
- SPFIX(	subeq	sp, sp, #4	)
-	stmia	sp, {r1 - r12}
+ SPFIX(	subne	sp, sp, #4	)
+
+ ARM(	stmib	sp, {r1 - r12}	)
+ THUMB(	stmia	sp, {r0 - r12}	)	@ No STMIB in Thumb-2
 
 	ldmia	r0, {r3 - r5}
-	add	r7, sp, #S_SP - 4	@ here for interlock avoidance
+	add	r7, sp, #S_SP		@ here for interlock avoidance
 	mov	r6, #-1			@  ""  ""      ""       ""
-	add	r2, sp, #(SVC_REGS_SIZE + \stack_hole - 4)
- SPFIX(	addeq	r2, r2, #4	)
-	str	r3, [sp, #-4]!		@ save the "real" r0 copied
+	add	r2, sp, #(SVC_REGS_SIZE + \stack_hole)
+ SPFIX(	addne	r2, r2, #4	)
+	str	r3, [sp]		@ save the "real" r0 copied
 					@ from the exception stack
 
 	mov	r3, lr
@@ -199,7 +220,7 @@ ENDPROC(__dabt_svc)
 	.align	5
 __irq_svc:
 	svc_entry
-	irq_handler
+	irq_handler from_user=0
 
 #ifdef CONFIG_PREEMPTION
 	ldr	r8, [tsk, #TI_PREEMPT]		@ get preempt count
@@ -426,7 +447,7 @@ ENDPROC(__dabt_usr)
 __irq_usr:
 	usr_entry
 	kuser_cmpxchg_check
-	irq_handler
+	irq_handler from_user=1
 	get_thread_info tsk
 	mov	why, #0
 	b	ret_to_user_from_irq
@@ -752,16 +773,17 @@ ENTRY(__switch_to)
 	ldr	r6, [r2, #TI_CPU_DOMAIN]
 #endif
 	switch_tls r1, r4, r5, r3, r7
-#if defined(CONFIG_STACKPROTECTOR) && !defined(CONFIG_SMP)
-	ldr	r7, [r2, #TI_TASK]
+#if defined(CONFIG_STACKPROTECTOR) && !defined(CONFIG_SMP) && \
+    !defined(CONFIG_STACKPROTECTOR_PER_TASK)
 	ldr	r8, =__stack_chk_guard
 	.if (TSK_STACK_CANARY > IMM12_MASK)
-	add	r7, r7, #TSK_STACK_CANARY & ~IMM12_MASK
+	add	r9, r2, #TSK_STACK_CANARY & ~IMM12_MASK
+	ldr	r9, [r9, #TSK_STACK_CANARY & IMM12_MASK]
+	.else
+	ldr	r9, [r2, #TSK_STACK_CANARY & IMM12_MASK]
 	.endif
-	ldr	r7, [r7, #TSK_STACK_CANARY & IMM12_MASK]
-#elif defined(CONFIG_CURRENT_POINTER_IN_TPIDRURO)
-	mov	r7, r2				@ Preserve 'next'
 #endif
+	mov	r7, r2				@ Preserve 'next'
 #ifdef CONFIG_CPU_USE_DOMAINS
 	mcr	p15, 0, r6, c3, c0, 0		@ Set domain register
 #endif
@@ -770,19 +792,102 @@ ENTRY(__switch_to)
 	ldr	r0, =thread_notify_head
 	mov	r1, #THREAD_NOTIFY_SWITCH
 	bl	atomic_notifier_call_chain
-#if defined(CONFIG_STACKPROTECTOR) && !defined(CONFIG_SMP)
-	str	r7, [r8]
+#if defined(CONFIG_STACKPROTECTOR) && !defined(CONFIG_SMP) && \
+    !defined(CONFIG_STACKPROTECTOR_PER_TASK)
+	str	r9, [r8]
 #endif
- THUMB(	mov	ip, r4			   )
 	mov	r0, r5
-	set_current r7
- ARM(	ldmia	r4, {r4 - sl, fp, sp, pc}  )	@ Load all regs saved previously
- THUMB(	ldmia	ip!, {r4 - sl, fp}	   )	@ Load all regs saved previously
- THUMB(	ldr	sp, [ip], #4		   )
- THUMB(	ldr	pc, [ip]		   )
+#if !defined(CONFIG_THUMB2_KERNEL) && !defined(CONFIG_VMAP_STACK)
+	set_current r7, r8
+	ldmia	r4, {r4 - sl, fp, sp, pc}	@ Load all regs saved previously
+#else
+	mov	r1, r7
+	ldmia	r4, {r4 - sl, fp, ip, lr}	@ Load all regs saved previously
+#ifdef CONFIG_VMAP_STACK
+	@
+	@ Do a dummy read from the new stack while running from the old one so
+	@ that we can rely on do_translation_fault() to fix up any stale PMD
+	@ entries covering the vmalloc region.
+	@
+	ldr	r2, [ip]
+#endif
+
+	@ When CONFIG_THREAD_INFO_IN_TASK=n, the update of SP itself is what
+	@ effectuates the task switch, as that is what causes the observable
+	@ values of current and current_thread_info to change. When
+	@ CONFIG_THREAD_INFO_IN_TASK=y, setting current (and therefore
+	@ current_thread_info) is done explicitly, and the update of SP just
+	@ switches us to another stack, with few other side effects. In order
+	@ to prevent this distinction from causing any inconsistencies, let's
+	@ keep the 'set_current' call as close as we can to the update of SP.
+	set_current r1, r2
+	mov	sp, ip
+	ret	lr
+#endif
  UNWIND(.fnend		)
 ENDPROC(__switch_to)
 
+#ifdef CONFIG_VMAP_STACK
+	.text
+	.align	2
+__bad_stack:
+	@
+	@ We've just detected an overflow. We need to load the address of this
+	@ CPU's overflow stack into the stack pointer register. We have only one
+	@ scratch register so let's use a sequence of ADDs including one
+	@ involving the PC, and decorate them with PC-relative group
+	@ relocations. As these are ARM only, switch to ARM mode first.
+	@
+	@ We enter here with IP clobbered and its value stashed on the mode
+	@ stack.
+	@
+THUMB(	bx	pc		)
+THUMB(	nop			)
+THUMB(	.arm			)
+	ldr_this_cpu_armv6 ip, overflow_stack_ptr
+
+	str	sp, [ip, #-4]!			@ Preserve original SP value
+	mov	sp, ip				@ Switch to overflow stack
+	pop	{ip}				@ Original SP in IP
+
+#if defined(CONFIG_UNWINDER_FRAME_POINTER) && defined(CONFIG_CC_IS_GCC)
+	mov	ip, ip				@ mov expected by unwinder
+	push	{fp, ip, lr, pc}		@ GCC flavor frame record
+#else
+	str	ip, [sp, #-8]!			@ store original SP
+	push	{fpreg, lr}			@ Clang flavor frame record
+#endif
+UNWIND( ldr	ip, [r0, #4]	)		@ load exception LR
+UNWIND( str	ip, [sp, #12]	)		@ store in the frame record
+	ldr	ip, [r0, #12]			@ reload IP
+
+	@ Store the original GPRs to the new stack.
+	svc_entry uaccess=0, overflow_check=0
+
+UNWIND( .save   {sp, pc}	)
+UNWIND( .save   {fpreg, lr}	)
+UNWIND( .setfp  fpreg, sp	)
+
+	ldr	fpreg, [sp, #S_SP]		@ Add our frame record
+						@ to the linked list
+#if defined(CONFIG_UNWINDER_FRAME_POINTER) && defined(CONFIG_CC_IS_GCC)
+	ldr	r1, [fp, #4]			@ reload SP at entry
+	add	fp, fp, #12
+#else
+	ldr	r1, [fpreg, #8]
+#endif
+	str	r1, [sp, #S_SP]			@ store in pt_regs
+
+	@ Stash the regs for handle_bad_stack
+	mov	r0, sp
+
+	@ Time to die
+	bl	handle_bad_stack
+	nop
+UNWIND( .fnend			)
+ENDPROC(__bad_stack)
+#endif
+
 	__INIT
 
 /*
@@ -1002,12 +1107,11 @@ vector_\name:
 	sub	lr, lr, #\correction
 	.endif
 
-	@
-	@ Save r0, lr_<exception> (parent PC) and spsr_<exception>
-	@ (parent CPSR)
-	@
+	@ Save r0, lr_<exception> (parent PC)
 	stmia	sp, {r0, lr}		@ save r0, lr
-	mrs	lr, spsr
+
+	@ Save spsr_<exception> (parent CPSR)
+2:	mrs	lr, spsr
 	str	lr, [sp, #8]		@ save spsr
 
 	@
@@ -1028,6 +1132,44 @@ vector_\name:
 	movs	pc, lr			@ branch to handler in SVC mode
 ENDPROC(vector_\name)
 
+#ifdef CONFIG_HARDEN_BRANCH_HISTORY
+	.subsection 1
+	.align 5
+vector_bhb_loop8_\name:
+	.if \correction
+	sub	lr, lr, #\correction
+	.endif
+
+	@ Save r0, lr_<exception> (parent PC)
+	stmia	sp, {r0, lr}
+
+	@ bhb workaround
+	mov	r0, #8
+3:	b	. + 4
+	subs	r0, r0, #1
+	bne	3b
+	dsb
+	isb
+	b	2b
+ENDPROC(vector_bhb_loop8_\name)
+
+vector_bhb_bpiall_\name:
+	.if \correction
+	sub	lr, lr, #\correction
+	.endif
+
+	@ Save r0, lr_<exception> (parent PC)
+	stmia	sp, {r0, lr}
+
+	@ bhb workaround
+	mcr	p15, 0, r0, c7, c5, 6	@ BPIALL
+	@ isb not needed due to "movs pc, lr" in the vector stub
+	@ which gives a "context synchronisation".
+	b	2b
+ENDPROC(vector_bhb_bpiall_\name)
+	.previous
+#endif
+
 	.align	2
 	@ handler addresses follow this label
 1:
@@ -1036,6 +1178,10 @@ ENDPROC(vector_\name)
 	.section .stubs, "ax", %progbits
 	@ This must be the first word
 	.word	vector_swi
+#ifdef CONFIG_HARDEN_BRANCH_HISTORY
+	.word	vector_bhb_loop8_swi
+	.word	vector_bhb_bpiall_swi
+#endif
 
 vector_rst:
  ARM(	swi	SYS_ERROR0	)
@@ -1150,8 +1296,10 @@ vector_addrexcptn:
  * FIQ "NMI" handler
  *-----------------------------------------------------------------------------
  * Handle a FIQ using the SVC stack allowing FIQ act like NMI on x86
- * systems.
+ * systems. This must be the last vector stub, so lets place it in its own
+ * subsection.
  */
+	.subsection 2
 	vector_stub	fiq, FIQ_MODE, 4
 
 	.long	__fiq_usr			@  0  (USR_26 / USR_32)
@@ -1184,6 +1332,30 @@ vector_addrexcptn:
 	W(b)	vector_irq
 	W(b)	vector_fiq
 
+#ifdef CONFIG_HARDEN_BRANCH_HISTORY
+	.section .vectors.bhb.loop8, "ax", %progbits
+.L__vectors_bhb_loop8_start:
+	W(b)	vector_rst
+	W(b)	vector_bhb_loop8_und
+	W(ldr)	pc, .L__vectors_bhb_loop8_start + 0x1004
+	W(b)	vector_bhb_loop8_pabt
+	W(b)	vector_bhb_loop8_dabt
+	W(b)	vector_addrexcptn
+	W(b)	vector_bhb_loop8_irq
+	W(b)	vector_bhb_loop8_fiq
+
+	.section .vectors.bhb.bpiall, "ax", %progbits
+.L__vectors_bhb_bpiall_start:
+	W(b)	vector_rst
+	W(b)	vector_bhb_bpiall_und
+	W(ldr)	pc, .L__vectors_bhb_bpiall_start + 0x1008
+	W(b)	vector_bhb_bpiall_pabt
+	W(b)	vector_bhb_bpiall_dabt
+	W(b)	vector_addrexcptn
+	W(b)	vector_bhb_bpiall_irq
+	W(b)	vector_bhb_bpiall_fiq
+#endif
+
 	.data
 	.align	2
 
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index ac86c34682bb..90d40f4d56cf 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -16,12 +16,14 @@
 
 	.equ	NR_syscalls, __NR_syscalls
 
-#ifdef CONFIG_NEED_RET_TO_USER
-#include <mach/entry-macro.S>
-#else
-	.macro  arch_ret_to_user, tmp1, tmp2
-	.endm
+	.macro  arch_ret_to_user, tmp
+#ifdef CONFIG_ARCH_IOP32X
+	mrc	p15, 0, \tmp, c15, c1, 0
+	tst	\tmp, #(1 << 6)
+	bicne	\tmp, \tmp, #(1 << 6)
+	mcrne	p15, 0, \tmp, c15, c1, 0	@ Disable cp6 access
 #endif
+	.endm
 
 #include "entry-header.S"
 
@@ -55,7 +57,7 @@ __ret_fast_syscall:
 
 
 	/* perform architecture specific actions before user return */
-	arch_ret_to_user r1, lr
+	arch_ret_to_user r1
 
 	restore_user_regs fast = 1, offset = S_OFF
  UNWIND(.fnend		)
@@ -128,7 +130,7 @@ no_work_pending:
 	asm_trace_hardirqs_on save = 0
 
 	/* perform architecture specific actions before user return */
-	arch_ret_to_user r1, lr
+	arch_ret_to_user r1
 	ct_user_enter save = 0
 
 	restore_user_regs fast = 0, offset = 0
@@ -154,12 +156,36 @@ ENDPROC(ret_from_fork)
  */
 
 	.align	5
+#ifdef CONFIG_HARDEN_BRANCH_HISTORY
+ENTRY(vector_bhb_loop8_swi)
+	sub	sp, sp, #PT_REGS_SIZE
+	stmia	sp, {r0 - r12}
+	mov	r8, #8
+1:	b	2f
+2:	subs	r8, r8, #1
+	bne	1b
+	dsb
+	isb
+	b	3f
+ENDPROC(vector_bhb_loop8_swi)
+
+	.align	5
+ENTRY(vector_bhb_bpiall_swi)
+	sub	sp, sp, #PT_REGS_SIZE
+	stmia	sp, {r0 - r12}
+	mcr	p15, 0, r8, c7, c5, 6	@ BPIALL
+	isb
+	b	3f
+ENDPROC(vector_bhb_bpiall_swi)
+#endif
+	.align	5
 ENTRY(vector_swi)
 #ifdef CONFIG_CPU_V7M
 	v7m_exception_entry
 #else
 	sub	sp, sp, #PT_REGS_SIZE
 	stmia	sp, {r0 - r12}			@ Calling r0 - r12
+3:
  ARM(	add	r8, sp, #S_PC		)
  ARM(	stmdb	r8, {sp, lr}^		)	@ Calling sp, lr
  THUMB(	mov	r8, sp			)
diff --git a/arch/arm/kernel/entry-ftrace.S b/arch/arm/kernel/entry-ftrace.S
index a74289ebc803..3e7bcaca5e07 100644
--- a/arch/arm/kernel/entry-ftrace.S
+++ b/arch/arm/kernel/entry-ftrace.S
@@ -22,12 +22,9 @@
  * mcount can be thought of as a function called in the middle of a subroutine
  * call.  As such, it needs to be transparent for both the caller and the
  * callee: the original lr needs to be restored when leaving mcount, and no
- * registers should be clobbered.  (In the __gnu_mcount_nc implementation, we
- * clobber the ip register.  This is OK because the ARM calling convention
- * allows it to be clobbered in subroutines and doesn't use it to hold
- * parameters.)
+ * registers should be clobbered.
  *
- * When using dynamic ftrace, we patch out the mcount call by a "pop {lr}"
+ * When using dynamic ftrace, we patch out the mcount call by a "add sp, #4"
  * instead of the __gnu_mcount_nc call (see arch/arm/kernel/ftrace.c).
  */
 
@@ -38,23 +35,20 @@
 
 .macro __mcount suffix
 	mcount_enter
-	ldr	r0, =ftrace_trace_function
-	ldr	r2, [r0]
-	adr	r0, .Lftrace_stub
+	ldr_va	r2, ftrace_trace_function
+	badr	r0, .Lftrace_stub
 	cmp	r0, r2
 	bne	1f
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
-	ldr     r1, =ftrace_graph_return
-	ldr     r2, [r1]
-	cmp     r0, r2
-	bne     ftrace_graph_caller\suffix
-
-	ldr     r1, =ftrace_graph_entry
-	ldr     r2, [r1]
-	ldr     r0, =ftrace_graph_entry_stub
-	cmp     r0, r2
-	bne     ftrace_graph_caller\suffix
+	ldr_va	r2, ftrace_graph_return
+	cmp	r0, r2
+	bne	ftrace_graph_caller\suffix
+
+	ldr_va	r2, ftrace_graph_entry
+	mov_l	r0, ftrace_graph_entry_stub
+	cmp	r0, r2
+	bne	ftrace_graph_caller\suffix
 #endif
 
 	mcount_exit
@@ -70,29 +64,27 @@
 
 .macro __ftrace_regs_caller
 
-	sub	sp, sp, #8	@ space for PC and CPSR OLD_R0,
+	str	lr, [sp, #-8]!	@ store LR as PC and make space for CPSR/OLD_R0,
 				@ OLD_R0 will overwrite previous LR
 
-	add 	ip, sp, #12	@ move in IP the value of SP as it was
-				@ before the push {lr} of the mcount mechanism
+	ldr	lr, [sp, #8]    @ get previous LR
 
-	str     lr, [sp, #0]    @ store LR instead of PC
+	str	r0, [sp, #8]	@ write r0 as OLD_R0 over previous LR
 
-	ldr     lr, [sp, #8]    @ get previous LR
+	str	lr, [sp, #-4]!	@ store previous LR as LR
 
-	str	r0, [sp, #8]	@ write r0 as OLD_R0 over previous LR
+	add 	lr, sp, #16	@ move in LR the value of SP as it was
+				@ before the push {lr} of the mcount mechanism
 
-	stmdb   sp!, {ip, lr}
-	stmdb   sp!, {r0-r11, lr}
+	push	{r0-r11, ip, lr}
 
 	@ stack content at this point:
 	@ 0  4          48   52       56            60   64    68       72
-	@ R0 | R1 | ... | LR | SP + 4 | previous LR | LR | PSR | OLD_R0 |
+	@ R0 | R1 | ... | IP | SP + 4 | previous LR | LR | PSR | OLD_R0 |
 
-	mov r3, sp				@ struct pt_regs*
+	mov	r3, sp				@ struct pt_regs*
 
-	ldr r2, =function_trace_op
-	ldr r2, [r2]				@ pointer to the current
+	ldr_va	r2, function_trace_op		@ pointer to the current
 						@ function tracing op
 
 	ldr	r1, [sp, #S_LR]			@ lr of instrumented func
@@ -108,35 +100,37 @@ ftrace_regs_call:
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 	.globl ftrace_graph_regs_call
 ftrace_graph_regs_call:
-	mov	r0, r0
+ARM(	mov	r0, r0	)
+THUMB(	nop.w		)
 #endif
 
 	@ pop saved regs
-	ldmia   sp!, {r0-r12}			@ restore r0 through r12
-	ldr	ip, [sp, #8]			@ restore PC
-	ldr	lr, [sp, #4]			@ restore LR
-	ldr	sp, [sp, #0]			@ restore SP
-	mov	pc, ip				@ return
+	pop	{r0-r11, ip, lr}		@ restore r0 through r12
+	ldr	lr, [sp], #4			@ restore LR
+	ldr	pc, [sp], #12
 .endm
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 .macro __ftrace_graph_regs_caller
 
-	sub     r0, fp, #4              @ lr of instrumented routine (parent)
+#ifdef CONFIG_UNWINDER_FRAME_POINTER
+	sub	r0, fp, #4		@ lr of instrumented routine (parent)
+#else
+	add	r0, sp, #S_LR
+#endif
 
 	@ called from __ftrace_regs_caller
-	ldr     r1, [sp, #S_PC]		@ instrumented routine (func)
+	ldr	r1, [sp, #S_PC]		@ instrumented routine (func)
 	mcount_adjust_addr	r1, r1
 
-	mov	r2, fp			@ frame pointer
+	mov	r2, fpreg		@ frame pointer
+	add	r3, sp, #PT_REGS_SIZE
 	bl	prepare_ftrace_return
 
 	@ pop registers saved in ftrace_regs_caller
-	ldmia   sp!, {r0-r12}			@ restore r0 through r12
-	ldr	ip, [sp, #8]			@ restore PC
-	ldr	lr, [sp, #4]			@ restore LR
-	ldr	sp, [sp, #0]			@ restore SP
-	mov	pc, ip				@ return
+	pop	{r0-r11, ip, lr}		@ restore r0 through r12
+	ldr	lr, [sp], #4			@ restore LR
+	ldr	pc, [sp], #12
 
 .endm
 #endif
@@ -149,8 +143,7 @@ ftrace_graph_regs_call:
 	mcount_adjust_addr	r0, lr		@ instrumented function
 
 #ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
-	ldr r2, =function_trace_op
-	ldr r2, [r2]				@ pointer to the current
+	ldr_va	r2, function_trace_op		@ pointer to the current
 						@ function tracing op
 	mov r3, #0				@ regs is NULL
 #endif
@@ -162,14 +155,19 @@ ftrace_call\suffix:
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 	.globl ftrace_graph_call\suffix
 ftrace_graph_call\suffix:
-	mov	r0, r0
+ARM(	mov	r0, r0	)
+THUMB(	nop.w		)
 #endif
 
 	mcount_exit
 .endm
 
 .macro __ftrace_graph_caller
+#ifdef CONFIG_UNWINDER_FRAME_POINTER
 	sub	r0, fp, #4		@ &lr of instrumented routine (&parent)
+#else
+	add	r0, sp, #20
+#endif
 #ifdef CONFIG_DYNAMIC_FTRACE
 	@ called from __ftrace_caller, saved in mcount_enter
 	ldr	r1, [sp, #16]		@ instrumented routine (func)
@@ -178,7 +176,8 @@ ftrace_graph_call\suffix:
 	@ called from __mcount, untouched in lr
 	mcount_adjust_addr	r1, lr	@ instrumented routine (func)
 #endif
-	mov	r2, fp			@ frame pointer
+	mov	r2, fpreg		@ frame pointer
+	add	r3, sp, #24
 	bl	prepare_ftrace_return
 	mcount_exit
 .endm
@@ -202,16 +201,17 @@ ftrace_graph_call\suffix:
 .endm
 
 .macro mcount_exit
-	ldmia	sp!, {r0-r3, ip, lr}
-	ret	ip
+	ldmia	sp!, {r0-r3}
+	ldr	lr, [sp, #4]
+	ldr	pc, [sp], #8
 .endm
 
 ENTRY(__gnu_mcount_nc)
 UNWIND(.fnstart)
 #ifdef CONFIG_DYNAMIC_FTRACE
-	mov	ip, lr
-	ldmia	sp!, {lr}
-	ret	ip
+	push	{lr}
+	ldr	lr, [sp, #4]
+	ldr	pc, [sp], #8
 #else
 	__mcount
 #endif
@@ -256,17 +256,33 @@ ENDPROC(ftrace_graph_regs_caller)
 .purgem mcount_exit
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
-	.globl return_to_handler
-return_to_handler:
+ENTRY(return_to_handler)
 	stmdb	sp!, {r0-r3}
-	mov	r0, fp			@ frame pointer
+	add	r0, sp, #16		@ sp at exit of instrumented routine
 	bl	ftrace_return_to_handler
 	mov	lr, r0			@ r0 has real ret addr
 	ldmia	sp!, {r0-r3}
 	ret	lr
+ENDPROC(return_to_handler)
 #endif
 
 ENTRY(ftrace_stub)
 .Lftrace_stub:
 	ret	lr
 ENDPROC(ftrace_stub)
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+
+	__INIT
+
+	.macro	init_tramp, dst:req
+ENTRY(\dst\()_from_init)
+	ldr	pc, =\dst
+ENDPROC(\dst\()_from_init)
+	.endm
+
+	init_tramp	ftrace_caller
+#ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
+	init_tramp	ftrace_regs_caller
+#endif
+#endif
diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S
index ae24dd54e9ef..9a1dc142f782 100644
--- a/arch/arm/kernel/entry-header.S
+++ b/arch/arm/kernel/entry-header.S
@@ -292,12 +292,18 @@
 
 
 	.macro	restore_user_regs, fast = 0, offset = 0
-#if defined(CONFIG_CPU_32v6K) && !defined(CONFIG_CPU_V6)
+#if defined(CONFIG_CPU_32v6K) && \
+    (!defined(CONFIG_CPU_V6) || defined(CONFIG_SMP))
+#ifdef CONFIG_CPU_V6
+ALT_SMP(nop)
+ALT_UP_B(.L1_\@)
+#endif
 	@ The TLS register update is deferred until return to user space so we
 	@ can use it for other things while running in the kernel
-	get_thread_info r1
+	mrc	p15, 0, r1, c13, c0, 3		@ get current_thread_info pointer
 	ldr	r1, [r1, #TI_TP_VALUE]
 	mcr	p15, 0, r1, c13, c0, 3		@ set TLS register
+.L1_\@:
 #endif
 
 	uaccess_enable r1, isb=0
@@ -423,3 +429,40 @@ scno	.req	r7		@ syscall number
 tbl	.req	r8		@ syscall table pointer
 why	.req	r8		@ Linux syscall (!= 0)
 tsk	.req	r9		@ current thread_info
+
+	.macro	do_overflow_check, frame_size:req
+#ifdef CONFIG_VMAP_STACK
+	@
+	@ Test whether the SP has overflowed. Task and IRQ stacks are aligned
+	@ so that SP & BIT(THREAD_SIZE_ORDER + PAGE_SHIFT) should always be
+	@ zero.
+	@
+ARM(	tst	sp, #1 << (THREAD_SIZE_ORDER + PAGE_SHIFT)	)
+THUMB(	tst	r1, #1 << (THREAD_SIZE_ORDER + PAGE_SHIFT)	)
+THUMB(	it	ne						)
+	bne	.Lstack_overflow_check\@
+
+	.pushsection	.text
+.Lstack_overflow_check\@:
+	@
+	@ The stack pointer is not pointing to a valid vmap'ed stack, but it
+	@ may be pointing into the linear map instead, which may happen if we
+	@ are already running from the overflow stack. We cannot detect overflow
+	@ in such cases so just carry on.
+	@
+	str	ip, [r0, #12]			@ Stash IP on the mode stack
+	ldr_va	ip, high_memory			@ Start of VMALLOC space
+ARM(	cmp	sp, ip			)	@ SP in vmalloc space?
+THUMB(	cmp	r1, ip			)
+THUMB(	itt	lo			)
+	ldrlo	ip, [r0, #12]			@ Restore IP
+	blo	.Lout\@				@ Carry on
+
+THUMB(	sub	r1, sp, r1		)	@ Restore original R1
+THUMB(	sub	sp, r1			)	@ Restore original SP
+	add	sp, sp, #\frame_size		@ Undo svc_entry's SP change
+	b	__bad_stack			@ Handle VMAP stack overflow
+	.popsection
+.Lout\@:
+#endif
+	.endm
diff --git a/arch/arm/kernel/entry-v7m.S b/arch/arm/kernel/entry-v7m.S
index 7bde93c10962..de8a60363c85 100644
--- a/arch/arm/kernel/entry-v7m.S
+++ b/arch/arm/kernel/entry-v7m.S
@@ -39,16 +39,25 @@ __irq_entry:
 	@
 	@ Invoke the IRQ handler
 	@
-	mrs	r0, ipsr
-	ldr	r1, =V7M_xPSR_EXCEPTIONNO
-	and	r0, r1
-	sub	r0, #16
-	mov	r1, sp
-	stmdb	sp!, {lr}
-	@ routine called with r0 = irq number, r1 = struct pt_regs *
-	bl	nvic_handle_irq
-
-	pop	{lr}
+	mov	r0, sp
+	ldr_this_cpu sp, irq_stack_ptr, r1, r2
+
+	@
+	@ If we took the interrupt while running in the kernel, we may already
+	@ be using the IRQ stack, so revert to the original value in that case.
+	@
+	subs	r2, sp, r0		@ SP above bottom of IRQ stack?
+	rsbscs	r2, r2, #THREAD_SIZE	@ ... and below the top?
+	movcs	sp, r0
+
+	push	{r0, lr}		@ preserve LR and original SP
+
+	@ routine called with r0 = struct pt_regs *
+	bl	generic_handle_arch_irq
+
+	pop	{r0, lr}
+	mov	sp, r0
+
 	@
 	@ Check for any pending work if returning to user
 	@
@@ -101,15 +110,17 @@ ENTRY(__switch_to)
 	str	sp, [ip], #4
 	str	lr, [ip], #4
 	mov	r5, r0
+	mov	r6, r2			@ Preserve 'next'
 	add	r4, r2, #TI_CPU_SAVE
 	ldr	r0, =thread_notify_head
 	mov	r1, #THREAD_NOTIFY_SWITCH
 	bl	atomic_notifier_call_chain
-	mov	ip, r4
 	mov	r0, r5
-	ldmia	ip!, {r4 - r11}		@ Load all regs saved previously
-	ldr	sp, [ip]
-	ldr	pc, [ip, #4]!
+	mov	r1, r6
+	ldmia	r4, {r4 - r12, lr}	@ Load all regs saved previously
+	set_current r1, r2
+	mov	sp, ip
+	bx	lr
 	.fnend
 ENDPROC(__switch_to)
 
diff --git a/arch/arm/kernel/ftrace.c b/arch/arm/kernel/ftrace.c
index a006585e1c09..83cc068586bc 100644
--- a/arch/arm/kernel/ftrace.c
+++ b/arch/arm/kernel/ftrace.c
@@ -22,12 +22,24 @@
 #include <asm/ftrace.h>
 #include <asm/insn.h>
 #include <asm/set_memory.h>
+#include <asm/stacktrace.h>
 #include <asm/patch.h>
 
+/*
+ * The compiler emitted profiling hook consists of
+ *
+ *   PUSH    {LR}
+ *   BL	     __gnu_mcount_nc
+ *
+ * To turn this combined sequence into a NOP, we need to restore the value of
+ * SP before the PUSH. Let's use an ADD rather than a POP into LR, as LR is not
+ * modified anyway, and reloading LR from memory is highly likely to be less
+ * efficient.
+ */
 #ifdef CONFIG_THUMB2_KERNEL
-#define	NOP		0xf85deb04	/* pop.w {lr} */
+#define	NOP		0xf10d0d04	/* add.w sp, sp, #4 */
 #else
-#define	NOP		0xe8bd4000	/* pop {lr} */
+#define	NOP		0xe28dd004	/* add   sp, sp, #4 */
 #endif
 
 #ifdef CONFIG_DYNAMIC_FTRACE
@@ -51,9 +63,20 @@ static unsigned long ftrace_nop_replace(struct dyn_ftrace *rec)
 	return NOP;
 }
 
-static unsigned long adjust_address(struct dyn_ftrace *rec, unsigned long addr)
+void ftrace_caller_from_init(void);
+void ftrace_regs_caller_from_init(void);
+
+static unsigned long __ref adjust_address(struct dyn_ftrace *rec,
+					  unsigned long addr)
 {
-	return addr;
+	if (!IS_ENABLED(CONFIG_DYNAMIC_FTRACE) ||
+	    system_state >= SYSTEM_FREEING_INITMEM ||
+	    likely(!is_kernel_inittext(rec->ip)))
+		return addr;
+	if (!IS_ENABLED(CONFIG_DYNAMIC_FTRACE_WITH_REGS) ||
+	    addr == (unsigned long)&ftrace_caller)
+		return (unsigned long)&ftrace_caller_from_init;
+	return (unsigned long)&ftrace_regs_caller_from_init;
 }
 
 int ftrace_arch_code_modify_prepare(void)
@@ -189,15 +212,23 @@ int ftrace_make_nop(struct module *mod,
 #endif
 
 	new = ftrace_nop_replace(rec);
-	ret = ftrace_modify_code(ip, old, new, true);
+	/*
+	 * Locations in .init.text may call __gnu_mcount_mc via a linker
+	 * emitted veneer if they are too far away from its implementation, and
+	 * so validation may fail spuriously in such cases. Let's work around
+	 * this by omitting those from validation.
+	 */
+	ret = ftrace_modify_code(ip, old, new, !is_kernel_inittext(ip));
 
 	return ret;
 }
 #endif /* CONFIG_DYNAMIC_FTRACE */
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
+asmlinkage
 void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
-			   unsigned long frame_pointer)
+			   unsigned long frame_pointer,
+			   unsigned long stack_pointer)
 {
 	unsigned long return_hooker = (unsigned long) &return_to_handler;
 	unsigned long old;
@@ -205,6 +236,23 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
 	if (unlikely(atomic_read(&current->tracing_graph_pause)))
 		return;
 
+	if (IS_ENABLED(CONFIG_UNWINDER_FRAME_POINTER)) {
+		/* FP points one word below parent's top of stack */
+		frame_pointer += 4;
+	} else {
+		struct stackframe frame = {
+			.fp = frame_pointer,
+			.sp = stack_pointer,
+			.lr = self_addr,
+			.pc = self_addr,
+		};
+		if (unwind_frame(&frame) < 0)
+			return;
+		if (frame.lr != self_addr)
+			parent = frame.lr_addr;
+		frame_pointer = frame.sp;
+	}
+
 	old = *parent;
 	*parent = return_hooker;
 
@@ -225,7 +273,7 @@ static int __ftrace_modify_caller(unsigned long *callsite,
 	unsigned long caller_fn = (unsigned long) func;
 	unsigned long pc = (unsigned long) callsite;
 	unsigned long branch = arm_gen_branch(pc, caller_fn);
-	unsigned long nop = 0xe1a00000;	/* mov r0, r0 */
+	unsigned long nop = arm_gen_nop();
 	unsigned long old = enable ? nop : branch;
 	unsigned long new = enable ? branch : nop;
 
diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S
index da18e0a17dc2..42cae73fcc19 100644
--- a/arch/arm/kernel/head-common.S
+++ b/arch/arm/kernel/head-common.S
@@ -105,10 +105,8 @@ __mmap_switched:
 	mov	r1, #0
 	bl	__memset			@ clear .bss
 
-#ifdef CONFIG_CURRENT_POINTER_IN_TPIDRURO
 	adr_l	r0, init_task			@ get swapper task_struct
-	set_current r0
-#endif
+	set_current r0, r1
 
 	ldmia	r4, {r0, r1, r2, r3}
 	str	r9, [r0]			@ Save processor ID
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index c04dd94630c7..500612d3da2e 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -424,6 +424,13 @@ ENDPROC(secondary_startup)
 ENDPROC(secondary_startup_arm)
 
 ENTRY(__secondary_switched)
+#if defined(CONFIG_VMAP_STACK) && !defined(CONFIG_ARM_LPAE)
+	@ Before using the vmap'ed stack, we have to switch to swapper_pg_dir
+	@ as the ID map does not cover the vmalloc region.
+	mrc	p15, 0, ip, c2, c0, 1	@ read TTBR1
+	mcr	p15, 0, ip, c2, c0, 0	@ set TTBR0
+	instr_sync
+#endif
 	adr_l	r7, secondary_data + 12		@ get secondary_data.stack
 	ldr	sp, [r7]
 	ldr	r0, [r7, #4]			@ get secondary_data.task
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index b79975bd988c..5c6f8d11a3ce 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -36,13 +36,53 @@
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/hardware/cache-uniphier.h>
 #include <asm/outercache.h>
+#include <asm/softirq_stack.h>
 #include <asm/exception.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 
+#include "reboot.h"
+
 unsigned long irq_err_count;
 
+#ifdef CONFIG_IRQSTACKS
+
+asmlinkage DEFINE_PER_CPU_READ_MOSTLY(u8 *, irq_stack_ptr);
+
+static void __init init_irq_stacks(void)
+{
+	u8 *stack;
+	int cpu;
+
+	for_each_possible_cpu(cpu) {
+		if (!IS_ENABLED(CONFIG_VMAP_STACK))
+			stack = (u8 *)__get_free_pages(GFP_KERNEL,
+						       THREAD_SIZE_ORDER);
+		else
+			stack = __vmalloc_node(THREAD_SIZE, THREAD_ALIGN,
+					       THREADINFO_GFP, NUMA_NO_NODE,
+					       __builtin_return_address(0));
+
+		if (WARN_ON(!stack))
+			break;
+		per_cpu(irq_stack_ptr, cpu) = &stack[THREAD_SIZE];
+	}
+}
+
+static void ____do_softirq(void *arg)
+{
+	__do_softirq();
+}
+
+void do_softirq_own_stack(void)
+{
+	call_with_stack(____do_softirq, NULL,
+			__this_cpu_read(irq_stack_ptr));
+}
+
+#endif
+
 int arch_show_interrupts(struct seq_file *p, int prec)
 {
 #ifdef CONFIG_FIQ
@@ -80,27 +120,14 @@ void handle_IRQ(unsigned int irq, struct pt_regs *regs)
 		ack_bad_irq(irq);
 }
 
-/*
- * asm_do_IRQ is the interface to be used from assembly code.
- */
-asmlinkage void __exception_irq_entry
-asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
-{
-	struct pt_regs *old_regs;
-
-	irq_enter();
-	old_regs = set_irq_regs(regs);
-
-	handle_IRQ(irq, regs);
-
-	set_irq_regs(old_regs);
-	irq_exit();
-}
-
 void __init init_IRQ(void)
 {
 	int ret;
 
+#ifdef CONFIG_IRQSTACKS
+	init_irq_stacks();
+#endif
+
 	if (IS_ENABLED(CONFIG_OF) && !machine_desc->init_irq)
 		irqchip_init();
 	else
diff --git a/arch/arm/kernel/kgdb.c b/arch/arm/kernel/kgdb.c
index 7bd30c0a4280..22f937e6f3ff 100644
--- a/arch/arm/kernel/kgdb.c
+++ b/arch/arm/kernel/kgdb.c
@@ -154,22 +154,38 @@ static int kgdb_compiled_brk_fn(struct pt_regs *regs, unsigned int instr)
 	return 0;
 }
 
-static struct undef_hook kgdb_brkpt_hook = {
+static struct undef_hook kgdb_brkpt_arm_hook = {
 	.instr_mask		= 0xffffffff,
 	.instr_val		= KGDB_BREAKINST,
-	.cpsr_mask		= MODE_MASK,
+	.cpsr_mask		= PSR_T_BIT | MODE_MASK,
 	.cpsr_val		= SVC_MODE,
 	.fn			= kgdb_brk_fn
 };
 
-static struct undef_hook kgdb_compiled_brkpt_hook = {
+static struct undef_hook kgdb_brkpt_thumb_hook = {
+	.instr_mask		= 0xffff,
+	.instr_val		= KGDB_BREAKINST & 0xffff,
+	.cpsr_mask		= PSR_T_BIT | MODE_MASK,
+	.cpsr_val		= PSR_T_BIT | SVC_MODE,
+	.fn			= kgdb_brk_fn
+};
+
+static struct undef_hook kgdb_compiled_brkpt_arm_hook = {
 	.instr_mask		= 0xffffffff,
 	.instr_val		= KGDB_COMPILED_BREAK,
-	.cpsr_mask		= MODE_MASK,
+	.cpsr_mask		= PSR_T_BIT | MODE_MASK,
 	.cpsr_val		= SVC_MODE,
 	.fn			= kgdb_compiled_brk_fn
 };
 
+static struct undef_hook kgdb_compiled_brkpt_thumb_hook = {
+	.instr_mask		= 0xffff,
+	.instr_val		= KGDB_COMPILED_BREAK & 0xffff,
+	.cpsr_mask		= PSR_T_BIT | MODE_MASK,
+	.cpsr_val		= PSR_T_BIT | SVC_MODE,
+	.fn			= kgdb_compiled_brk_fn
+};
+
 static int __kgdb_notify(struct die_args *args, unsigned long cmd)
 {
 	struct pt_regs *regs = args->regs;
@@ -210,8 +226,10 @@ int kgdb_arch_init(void)
 	if (ret != 0)
 		return ret;
 
-	register_undef_hook(&kgdb_brkpt_hook);
-	register_undef_hook(&kgdb_compiled_brkpt_hook);
+	register_undef_hook(&kgdb_brkpt_arm_hook);
+	register_undef_hook(&kgdb_brkpt_thumb_hook);
+	register_undef_hook(&kgdb_compiled_brkpt_arm_hook);
+	register_undef_hook(&kgdb_compiled_brkpt_thumb_hook);
 
 	return 0;
 }
@@ -224,8 +242,10 @@ int kgdb_arch_init(void)
  */
 void kgdb_arch_exit(void)
 {
-	unregister_undef_hook(&kgdb_brkpt_hook);
-	unregister_undef_hook(&kgdb_compiled_brkpt_hook);
+	unregister_undef_hook(&kgdb_brkpt_arm_hook);
+	unregister_undef_hook(&kgdb_brkpt_thumb_hook);
+	unregister_undef_hook(&kgdb_compiled_brkpt_arm_hook);
+	unregister_undef_hook(&kgdb_compiled_brkpt_thumb_hook);
 	unregister_die_notifier(&kgdb_notifier);
 }
 
diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index beac45e89ba6..549abcedf795 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -68,6 +68,44 @@ bool module_exit_section(const char *name)
 		strstarts(name, ".ARM.exidx.exit");
 }
 
+#ifdef CONFIG_ARM_HAS_GROUP_RELOCS
+/*
+ * This implements the partitioning algorithm for group relocations as
+ * documented in the ARM AArch32 ELF psABI (IHI 0044).
+ *
+ * A single PC-relative symbol reference is divided in up to 3 add or subtract
+ * operations, where the final one could be incorporated into a load/store
+ * instruction with immediate offset. E.g.,
+ *
+ *   ADD	Rd, PC, #...		or	ADD	Rd, PC, #...
+ *   ADD	Rd, Rd, #...			ADD	Rd, Rd, #...
+ *   LDR	Rd, [Rd, #...]			ADD	Rd, Rd, #...
+ *
+ * The latter has a guaranteed range of only 16 MiB (3x8 == 24 bits), so it is
+ * of limited use in the kernel. However, the ADD/ADD/LDR combo has a range of
+ * -/+ 256 MiB, (2x8 + 12 == 28 bits), which means it has sufficient range for
+ * any in-kernel symbol reference (unless module PLTs are being used).
+ *
+ * The main advantage of this approach over the typical pattern using a literal
+ * load is that literal loads may miss in the D-cache, and generally lead to
+ * lower cache efficiency for variables that are referenced often from many
+ * different places in the code.
+ */
+static u32 get_group_rem(u32 group, u32 *offset)
+{
+	u32 val = *offset;
+	u32 shift;
+	do {
+		shift = val ? (31 - __fls(val)) & ~1 : 32;
+		*offset = val;
+		if (!val)
+			break;
+		val &= 0xffffff >> shift;
+	} while (group--);
+	return shift;
+}
+#endif
+
 int
 apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 	       unsigned int relindex, struct module *module)
@@ -82,6 +120,9 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 		unsigned long loc;
 		Elf32_Sym *sym;
 		const char *symname;
+#ifdef CONFIG_ARM_HAS_GROUP_RELOCS
+		u32 shift, group = 1;
+#endif
 		s32 offset;
 		u32 tmp;
 #ifdef CONFIG_THUMB2_KERNEL
@@ -212,6 +253,55 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
 			*(u32 *)loc = __opcode_to_mem_arm(tmp);
 			break;
 
+#ifdef CONFIG_ARM_HAS_GROUP_RELOCS
+		case R_ARM_ALU_PC_G0_NC:
+			group = 0;
+			fallthrough;
+		case R_ARM_ALU_PC_G1_NC:
+			tmp = __mem_to_opcode_arm(*(u32 *)loc);
+			offset = ror32(tmp & 0xff, (tmp & 0xf00) >> 7);
+			if (tmp & BIT(22))
+				offset = -offset;
+			offset += sym->st_value - loc;
+			if (offset < 0) {
+				offset = -offset;
+				tmp = (tmp & ~BIT(23)) | BIT(22); // SUB opcode
+			} else {
+				tmp = (tmp & ~BIT(22)) | BIT(23); // ADD opcode
+			}
+
+			shift = get_group_rem(group, &offset);
+			if (shift < 24) {
+				offset >>= 24 - shift;
+				offset |= (shift + 8) << 7;
+			}
+			*(u32 *)loc = __opcode_to_mem_arm((tmp & ~0xfff) | offset);
+			break;
+
+		case R_ARM_LDR_PC_G2:
+			tmp = __mem_to_opcode_arm(*(u32 *)loc);
+			offset = tmp & 0xfff;
+			if (~tmp & BIT(23))		// U bit cleared?
+				offset = -offset;
+			offset += sym->st_value - loc;
+			if (offset < 0) {
+				offset = -offset;
+				tmp &= ~BIT(23);	// clear U bit
+			} else {
+				tmp |= BIT(23);		// set U bit
+			}
+			get_group_rem(2, &offset);
+
+			if (offset > 0xfff) {
+				pr_err("%s: section %u reloc %u sym '%s': relocation %u out of range (%#lx -> %#x)\n",
+				       module->name, relindex, i, symname,
+				       ELF32_R_TYPE(rel->r_info), loc,
+				       sym->st_value);
+				return -ENOEXEC;
+			}
+			*(u32 *)loc = __opcode_to_mem_arm((tmp & ~0xfff) | offset);
+			break;
+#endif
 #ifdef CONFIG_THUMB2_KERNEL
 		case R_ARM_THM_CALL:
 		case R_ARM_THM_JUMP24:
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index d47159f3791c..0617af11377f 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -36,7 +36,7 @@
 
 #include "signal.h"
 
-#ifdef CONFIG_CURRENT_POINTER_IN_TPIDRURO
+#if defined(CONFIG_CURRENT_POINTER_IN_TPIDRURO) || defined(CONFIG_SMP)
 DEFINE_PER_CPU(struct task_struct *, __entry_task);
 #endif
 
@@ -46,6 +46,11 @@ unsigned long __stack_chk_guard __read_mostly;
 EXPORT_SYMBOL(__stack_chk_guard);
 #endif
 
+#ifndef CONFIG_CURRENT_POINTER_IN_TPIDRURO
+asmlinkage struct task_struct *__current;
+EXPORT_SYMBOL(__current);
+#endif
+
 static const char *processor_modes[] __maybe_unused = {
   "USER_26", "FIQ_26" , "IRQ_26" , "SVC_26" , "UK4_26" , "UK5_26" , "UK6_26" , "UK7_26" ,
   "UK8_26" , "UK9_26" , "UK10_26", "UK11_26", "UK12_26", "UK13_26", "UK14_26", "UK15_26",
diff --git a/arch/arm/kernel/return_address.c b/arch/arm/kernel/return_address.c
index 00c11579406c..8aac1e10b117 100644
--- a/arch/arm/kernel/return_address.c
+++ b/arch/arm/kernel/return_address.c
@@ -41,7 +41,8 @@ void *return_address(unsigned int level)
 	frame.fp = (unsigned long)__builtin_frame_address(0);
 	frame.sp = current_stack_pointer;
 	frame.lr = (unsigned long)__builtin_return_address(0);
-	frame.pc = (unsigned long)return_address;
+here:
+	frame.pc = (unsigned long)&&here;
 #ifdef CONFIG_KRETPROBES
 	frame.kr_cur = NULL;
 	frame.tsk = current;
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 284a80c0b6e1..039feb7cd590 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -141,10 +141,10 @@ EXPORT_SYMBOL(outer_cache);
 int __cpu_architecture __read_mostly = CPU_ARCH_UNKNOWN;
 
 struct stack {
-	u32 irq[3];
-	u32 abt[3];
-	u32 und[3];
-	u32 fiq[3];
+	u32 irq[4];
+	u32 abt[4];
+	u32 und[4];
+	u32 fiq[4];
 } ____cacheline_aligned;
 
 #ifndef CONFIG_CPU_V7M
diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S
index 43077e11dafd..a86a1d4f3461 100644
--- a/arch/arm/kernel/sleep.S
+++ b/arch/arm/kernel/sleep.S
@@ -67,6 +67,12 @@ ENTRY(__cpu_suspend)
 	ldr	r4, =cpu_suspend_size
 #endif
 	mov	r5, sp			@ current virtual SP
+#ifdef CONFIG_VMAP_STACK
+	@ Run the suspend code from the overflow stack so we don't have to rely
+	@ on vmalloc-to-phys conversions anywhere in the arch suspend code.
+	@ The original SP value captured in R5 will be restored on the way out.
+	ldr_this_cpu sp, overflow_stack_ptr, r6, r7
+#endif
 	add	r4, r4, #12		@ Space for pgd, virt sp, phys resume fn
 	sub	sp, sp, r4		@ allocate CPU state on stack
 	ldr	r3, =sleep_save_sp
@@ -113,6 +119,13 @@ ENTRY(cpu_resume_mmu)
 ENDPROC(cpu_resume_mmu)
 	.popsection
 cpu_resume_after_mmu:
+#if defined(CONFIG_VMAP_STACK) && !defined(CONFIG_ARM_LPAE)
+	@ Before using the vmap'ed stack, we have to switch to swapper_pg_dir
+	@ as the ID map does not cover the vmalloc region.
+	mrc	p15, 0, ip, c2, c0, 1	@ read TTBR1
+	mcr	p15, 0, ip, c2, c0, 0	@ set TTBR0
+	instr_sync
+#endif
 	bl	cpu_init		@ restore the und/abt/irq banked regs
 	mov	r0, #0			@ return zero on success
 	ldmfd	sp!, {r4 - r11, pc}
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 97ee6b1567e9..73fc645fc4c7 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -400,6 +400,12 @@ static void smp_store_cpu_info(unsigned int cpuid)
 	check_cpu_icache_size(cpuid);
 }
 
+static void set_current(struct task_struct *cur)
+{
+	/* Set TPIDRURO */
+	asm("mcr p15, 0, %0, c13, c0, 3" :: "r"(cur) : "memory");
+}
+
 /*
  * This is the secondary CPU boot entry.  We're using this CPUs
  * idle thread stack, but a set of temporary page tables.
@@ -628,11 +634,6 @@ static void ipi_complete(unsigned int cpu)
 /*
  * Main handler for inter-processor interrupts
  */
-asmlinkage void __exception_irq_entry do_IPI(int ipinr, struct pt_regs *regs)
-{
-	handle_IPI(ipinr, regs);
-}
-
 static void do_handle_IPI(int ipinr)
 {
 	unsigned int cpu = smp_processor_id();
diff --git a/arch/arm/kernel/spectre.c b/arch/arm/kernel/spectre.c
new file mode 100644
index 000000000000..0dcefc36fb7a
--- /dev/null
+++ b/arch/arm/kernel/spectre.c
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include <linux/bpf.h>
+#include <linux/cpu.h>
+#include <linux/device.h>
+
+#include <asm/spectre.h>
+
+static bool _unprivileged_ebpf_enabled(void)
+{
+#ifdef CONFIG_BPF_SYSCALL
+	return !sysctl_unprivileged_bpf_disabled;
+#else
+	return false;
+#endif
+}
+
+ssize_t cpu_show_spectre_v1(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	return sprintf(buf, "Mitigation: __user pointer sanitization\n");
+}
+
+static unsigned int spectre_v2_state;
+static unsigned int spectre_v2_methods;
+
+void spectre_v2_update_state(unsigned int state, unsigned int method)
+{
+	if (state > spectre_v2_state)
+		spectre_v2_state = state;
+	spectre_v2_methods |= method;
+}
+
+ssize_t cpu_show_spectre_v2(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	const char *method;
+
+	if (spectre_v2_state == SPECTRE_UNAFFECTED)
+		return sprintf(buf, "%s\n", "Not affected");
+
+	if (spectre_v2_state != SPECTRE_MITIGATED)
+		return sprintf(buf, "%s\n", "Vulnerable");
+
+	if (_unprivileged_ebpf_enabled())
+		return sprintf(buf, "Vulnerable: Unprivileged eBPF enabled\n");
+
+	switch (spectre_v2_methods) {
+	case SPECTRE_V2_METHOD_BPIALL:
+		method = "Branch predictor hardening";
+		break;
+
+	case SPECTRE_V2_METHOD_ICIALLU:
+		method = "I-cache invalidation";
+		break;
+
+	case SPECTRE_V2_METHOD_SMC:
+	case SPECTRE_V2_METHOD_HVC:
+		method = "Firmware call";
+		break;
+
+	case SPECTRE_V2_METHOD_LOOP8:
+		method = "History overwrite";
+		break;
+
+	default:
+		method = "Multiple mitigations";
+		break;
+	}
+
+	return sprintf(buf, "Mitigation: %s\n", method);
+}
diff --git a/arch/arm/kernel/stacktrace.c b/arch/arm/kernel/stacktrace.c
index 75e905508f27..b5efecb3d730 100644
--- a/arch/arm/kernel/stacktrace.c
+++ b/arch/arm/kernel/stacktrace.c
@@ -160,7 +160,8 @@ static noinline void __save_stack_trace(struct task_struct *tsk,
 		frame.fp = (unsigned long)__builtin_frame_address(0);
 		frame.sp = current_stack_pointer;
 		frame.lr = (unsigned long)__builtin_return_address(0);
-		frame.pc = (unsigned long)__save_stack_trace;
+here:
+		frame.pc = (unsigned long)&&here;
 	}
 #ifdef CONFIG_KRETPROBES
 	frame.kr_cur = NULL;
diff --git a/arch/arm/kernel/swp_emulate.c b/arch/arm/kernel/swp_emulate.c
index 6166ba38bf99..b74bfcf94fb1 100644
--- a/arch/arm/kernel/swp_emulate.c
+++ b/arch/arm/kernel/swp_emulate.c
@@ -195,7 +195,7 @@ static int swp_handler(struct pt_regs *regs, unsigned int instr)
 		 destreg, EXTRACT_REG_NUM(instr, RT2_OFFSET), data);
 
 	/* Check access in reasonable access range for both SWP and SWPB */
-	if (!access_ok((address & ~3), 4)) {
+	if (!access_ok((void __user *)(address & ~3), 4)) {
 		pr_debug("SWP{B} emulation: access to %p not allowed!\n",
 			 (void *)address);
 		res = -EFAULT;
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index da04ed85855a..9283dc65be31 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -30,11 +30,13 @@
 #include <linux/atomic.h>
 #include <asm/cacheflush.h>
 #include <asm/exception.h>
+#include <asm/spectre.h>
 #include <asm/unistd.h>
 #include <asm/traps.h>
 #include <asm/ptrace.h>
 #include <asm/unwind.h>
 #include <asm/tls.h>
+#include <asm/stacktrace.h>
 #include <asm/system_misc.h>
 #include <asm/opcodes.h>
 
@@ -60,13 +62,24 @@ static int __init user_debug_setup(char *str)
 __setup("user_debug=", user_debug_setup);
 #endif
 
-static void dump_mem(const char *, const char *, unsigned long, unsigned long);
-
 void dump_backtrace_entry(unsigned long where, unsigned long from,
 			  unsigned long frame, const char *loglvl)
 {
 	unsigned long end = frame + 4 + sizeof(struct pt_regs);
 
+	if (IS_ENABLED(CONFIG_UNWINDER_FRAME_POINTER) &&
+	    IS_ENABLED(CONFIG_CC_IS_GCC) &&
+	    end > ALIGN(frame, THREAD_SIZE)) {
+		/*
+		 * If we are walking past the end of the stack, it may be due
+		 * to the fact that we are on an IRQ or overflow stack. In this
+		 * case, we can load the address of the other stack from the
+		 * frame record.
+		 */
+		frame = ((unsigned long *)frame)[-2] - 4;
+		end = frame + 4 + sizeof(struct pt_regs);
+	}
+
 #ifndef CONFIG_KALLSYMS
 	printk("%sFunction entered at [<%08lx>] from [<%08lx>]\n",
 		loglvl, where, from);
@@ -110,7 +123,8 @@ void dump_backtrace_stm(u32 *stack, u32 instruction, const char *loglvl)
 static int verify_stack(unsigned long sp)
 {
 	if (sp < PAGE_OFFSET ||
-	    (sp > (unsigned long)high_memory && high_memory != NULL))
+	    (!IS_ENABLED(CONFIG_VMAP_STACK) &&
+	     sp > (unsigned long)high_memory && high_memory != NULL))
 		return -EFAULT;
 
 	return 0;
@@ -120,8 +134,8 @@ static int verify_stack(unsigned long sp)
 /*
  * Dump out the contents of some memory nicely...
  */
-static void dump_mem(const char *lvl, const char *str, unsigned long bottom,
-		     unsigned long top)
+void dump_mem(const char *lvl, const char *str, unsigned long bottom,
+	      unsigned long top)
 {
 	unsigned long first;
 	int i;
@@ -280,7 +294,8 @@ static int __die(const char *str, int err, struct pt_regs *regs)
 
 	if (!user_mode(regs) || in_interrupt()) {
 		dump_mem(KERN_EMERG, "Stack: ", regs->ARM_sp,
-			 THREAD_SIZE + (unsigned long)task_stack_page(tsk));
+			 ALIGN(regs->ARM_sp - THREAD_SIZE, THREAD_ALIGN)
+			 + THREAD_SIZE);
 		dump_backtrace(regs, tsk, KERN_EMERG);
 		dump_instr(KERN_EMERG, regs);
 	}
@@ -576,7 +591,7 @@ do_cache_op(unsigned long start, unsigned long end, int flags)
 	if (end < start || flags)
 		return -EINVAL;
 
-	if (!access_ok(start, end - start))
+	if (!access_ok((void __user *)start, end - start))
 		return -EFAULT;
 
 	return __do_cache_op(start, end);
@@ -789,10 +804,59 @@ static inline void __init kuser_init(void *vectors)
 }
 #endif
 
+#ifndef CONFIG_CPU_V7M
+static void copy_from_lma(void *vma, void *lma_start, void *lma_end)
+{
+	memcpy(vma, lma_start, lma_end - lma_start);
+}
+
+static void flush_vectors(void *vma, size_t offset, size_t size)
+{
+	unsigned long start = (unsigned long)vma + offset;
+	unsigned long end = start + size;
+
+	flush_icache_range(start, end);
+}
+
+#ifdef CONFIG_HARDEN_BRANCH_HISTORY
+int spectre_bhb_update_vectors(unsigned int method)
+{
+	extern char __vectors_bhb_bpiall_start[], __vectors_bhb_bpiall_end[];
+	extern char __vectors_bhb_loop8_start[], __vectors_bhb_loop8_end[];
+	void *vec_start, *vec_end;
+
+	if (system_state >= SYSTEM_FREEING_INITMEM) {
+		pr_err("CPU%u: Spectre BHB workaround too late - system vulnerable\n",
+		       smp_processor_id());
+		return SPECTRE_VULNERABLE;
+	}
+
+	switch (method) {
+	case SPECTRE_V2_METHOD_LOOP8:
+		vec_start = __vectors_bhb_loop8_start;
+		vec_end = __vectors_bhb_loop8_end;
+		break;
+
+	case SPECTRE_V2_METHOD_BPIALL:
+		vec_start = __vectors_bhb_bpiall_start;
+		vec_end = __vectors_bhb_bpiall_end;
+		break;
+
+	default:
+		pr_err("CPU%u: unknown Spectre BHB state %d\n",
+		       smp_processor_id(), method);
+		return SPECTRE_VULNERABLE;
+	}
+
+	copy_from_lma(vectors_page, vec_start, vec_end);
+	flush_vectors(vectors_page, 0, vec_end - vec_start);
+
+	return SPECTRE_MITIGATED;
+}
+#endif
+
 void __init early_trap_init(void *vectors_base)
 {
-#ifndef CONFIG_CPU_V7M
-	unsigned long vectors = (unsigned long)vectors_base;
 	extern char __stubs_start[], __stubs_end[];
 	extern char __vectors_start[], __vectors_end[];
 	unsigned i;
@@ -813,17 +877,87 @@ void __init early_trap_init(void *vectors_base)
 	 * into the vector page, mapped at 0xffff0000, and ensure these
 	 * are visible to the instruction stream.
 	 */
-	memcpy((void *)vectors, __vectors_start, __vectors_end - __vectors_start);
-	memcpy((void *)vectors + 0x1000, __stubs_start, __stubs_end - __stubs_start);
+	copy_from_lma(vectors_base, __vectors_start, __vectors_end);
+	copy_from_lma(vectors_base + 0x1000, __stubs_start, __stubs_end);
 
 	kuser_init(vectors_base);
 
-	flush_icache_range(vectors, vectors + PAGE_SIZE * 2);
+	flush_vectors(vectors_base, 0, PAGE_SIZE * 2);
+}
 #else /* ifndef CONFIG_CPU_V7M */
+void __init early_trap_init(void *vectors_base)
+{
 	/*
 	 * on V7-M there is no need to copy the vector table to a dedicated
 	 * memory area. The address is configurable and so a table in the kernel
 	 * image can be used.
 	 */
+}
+#endif
+
+#ifdef CONFIG_VMAP_STACK
+
+DECLARE_PER_CPU(u8 *, irq_stack_ptr);
+
+asmlinkage DEFINE_PER_CPU(u8 *, overflow_stack_ptr);
+
+static int __init allocate_overflow_stacks(void)
+{
+	u8 *stack;
+	int cpu;
+
+	for_each_possible_cpu(cpu) {
+		stack = (u8 *)__get_free_page(GFP_KERNEL);
+		if (WARN_ON(!stack))
+			return -ENOMEM;
+		per_cpu(overflow_stack_ptr, cpu) = &stack[OVERFLOW_STACK_SIZE];
+	}
+	return 0;
+}
+early_initcall(allocate_overflow_stacks);
+
+asmlinkage void handle_bad_stack(struct pt_regs *regs)
+{
+	unsigned long tsk_stk = (unsigned long)current->stack;
+#ifdef CONFIG_IRQSTACKS
+	unsigned long irq_stk = (unsigned long)this_cpu_read(irq_stack_ptr);
 #endif
+	unsigned long ovf_stk = (unsigned long)this_cpu_read(overflow_stack_ptr);
+
+	console_verbose();
+	pr_emerg("Insufficient stack space to handle exception!");
+
+	pr_emerg("Task stack:     [0x%08lx..0x%08lx]\n",
+		 tsk_stk, tsk_stk + THREAD_SIZE);
+#ifdef CONFIG_IRQSTACKS
+	pr_emerg("IRQ stack:      [0x%08lx..0x%08lx]\n",
+		 irq_stk - THREAD_SIZE, irq_stk);
+#endif
+	pr_emerg("Overflow stack: [0x%08lx..0x%08lx]\n",
+		 ovf_stk - OVERFLOW_STACK_SIZE, ovf_stk);
+
+	die("kernel stack overflow", regs, 0);
+}
+
+#ifndef CONFIG_ARM_LPAE
+/*
+ * Normally, we rely on the logic in do_translation_fault() to update stale PMD
+ * entries covering the vmalloc space in a task's page tables when it first
+ * accesses the region in question. Unfortunately, this is not sufficient when
+ * the task stack resides in the vmalloc region, as do_translation_fault() is a
+ * C function that needs a stack to run.
+ *
+ * So we need to ensure that these PMD entries are up to date *before* the MM
+ * switch. As we already have some logic in the MM switch path that takes care
+ * of this, let's trigger it by bumping the counter every time the core vmalloc
+ * code modifies a PMD entry in the vmalloc region. Use release semantics on
+ * the store so that other CPUs observing the counter's new value are
+ * guaranteed to see the updated page table entries as well.
+ */
+void arch_sync_kernel_mappings(unsigned long start, unsigned long end)
+{
+	if (start < VMALLOC_END && end > VMALLOC_START)
+		atomic_inc_return_release(&init_mm.context.vmalloc_seq);
 }
+#endif
+#endif
diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c
index 59fdf257bf8b..a37ea6c772cd 100644
--- a/arch/arm/kernel/unwind.c
+++ b/arch/arm/kernel/unwind.c
@@ -33,6 +33,8 @@
 #include <asm/traps.h>
 #include <asm/unwind.h>
 
+#include "reboot.h"
+
 /* Dummy functions to avoid linker complaints */
 void __aeabi_unwind_cpp_pr0(void)
 {
@@ -53,6 +55,7 @@ struct unwind_ctrl_block {
 	unsigned long vrs[16];		/* virtual register set */
 	const unsigned long *insn;	/* pointer to the current instructions word */
 	unsigned long sp_high;		/* highest value of sp allowed */
+	unsigned long *lr_addr;		/* address of LR value on the stack */
 	/*
 	 * 1 : check for stack overflow for each register pop.
 	 * 0 : save overhead if there is plenty of stack remaining.
@@ -237,6 +240,8 @@ static int unwind_pop_register(struct unwind_ctrl_block *ctrl,
 	 * from being tracked by KASAN.
 	 */
 	ctrl->vrs[reg] = READ_ONCE_NOCHECK(*(*vsp));
+	if (reg == 14)
+		ctrl->lr_addr = *vsp;
 	(*vsp)++;
 	return URC_OK;
 }
@@ -256,8 +261,9 @@ static int unwind_exec_pop_subset_r4_to_r13(struct unwind_ctrl_block *ctrl,
 		mask >>= 1;
 		reg++;
 	}
-	if (!load_sp)
+	if (!load_sp) {
 		ctrl->vrs[SP] = (unsigned long)vsp;
+	}
 
 	return URC_OK;
 }
@@ -313,9 +319,9 @@ static int unwind_exec_insn(struct unwind_ctrl_block *ctrl)
 
 	if ((insn & 0xc0) == 0x00)
 		ctrl->vrs[SP] += ((insn & 0x3f) << 2) + 4;
-	else if ((insn & 0xc0) == 0x40)
+	else if ((insn & 0xc0) == 0x40) {
 		ctrl->vrs[SP] -= ((insn & 0x3f) << 2) + 4;
-	else if ((insn & 0xf0) == 0x80) {
+	} else if ((insn & 0xf0) == 0x80) {
 		unsigned long mask;
 
 		insn = (insn << 8) | unwind_get_byte(ctrl);
@@ -330,9 +336,9 @@ static int unwind_exec_insn(struct unwind_ctrl_block *ctrl)
 		if (ret)
 			goto error;
 	} else if ((insn & 0xf0) == 0x90 &&
-		   (insn & 0x0d) != 0x0d)
+		   (insn & 0x0d) != 0x0d) {
 		ctrl->vrs[SP] = ctrl->vrs[insn & 0x0f];
-	else if ((insn & 0xf0) == 0xa0) {
+	} else if ((insn & 0xf0) == 0xa0) {
 		ret = unwind_exec_pop_r4_to_rN(ctrl, insn);
 		if (ret)
 			goto error;
@@ -375,23 +381,22 @@ error:
  */
 int unwind_frame(struct stackframe *frame)
 {
-	unsigned long low;
 	const struct unwind_idx *idx;
 	struct unwind_ctrl_block ctrl;
+	unsigned long sp_low;
 
 	/* store the highest address on the stack to avoid crossing it*/
-	low = frame->sp;
-	ctrl.sp_high = ALIGN(low, THREAD_SIZE);
+	sp_low = frame->sp;
+	ctrl.sp_high = ALIGN(sp_low - THREAD_SIZE, THREAD_ALIGN)
+		       + THREAD_SIZE;
 
 	pr_debug("%s(pc = %08lx lr = %08lx sp = %08lx)\n", __func__,
 		 frame->pc, frame->lr, frame->sp);
 
-	if (!kernel_text_address(frame->pc))
-		return -URC_FAILURE;
-
 	idx = unwind_find_idx(frame->pc);
 	if (!idx) {
-		pr_warn("unwind: Index not found %08lx\n", frame->pc);
+		if (frame->pc && kernel_text_address(frame->pc))
+			pr_warn("unwind: Index not found %08lx\n", frame->pc);
 		return -URC_FAILURE;
 	}
 
@@ -403,7 +408,20 @@ int unwind_frame(struct stackframe *frame)
 	if (idx->insn == 1)
 		/* can't unwind */
 		return -URC_FAILURE;
-	else if ((idx->insn & 0x80000000) == 0)
+	else if (frame->pc == prel31_to_addr(&idx->addr_offset)) {
+		/*
+		 * Unwinding is tricky when we're halfway through the prologue,
+		 * since the stack frame that the unwinder expects may not be
+		 * fully set up yet. However, one thing we do know for sure is
+		 * that if we are unwinding from the very first instruction of
+		 * a function, we are still effectively in the stack frame of
+		 * the caller, and the unwind info has no relevance yet.
+		 */
+		if (frame->pc == frame->lr)
+			return -URC_FAILURE;
+		frame->pc = frame->lr;
+		return URC_OK;
+	} else if ((idx->insn & 0x80000000) == 0)
 		/* prel31 to the unwind table */
 		ctrl.insn = (unsigned long *)prel31_to_addr(&idx->insn);
 	else if ((idx->insn & 0xff000000) == 0x80000000)
@@ -430,6 +448,16 @@ int unwind_frame(struct stackframe *frame)
 
 	ctrl.check_each_pop = 0;
 
+	if (prel31_to_addr(&idx->addr_offset) == (u32)&call_with_stack) {
+		/*
+		 * call_with_stack() is the only place where we permit SP to
+		 * jump from one stack to another, and since we know it is
+		 * guaranteed to happen, set up the SP bounds accordingly.
+		 */
+		sp_low = frame->fp;
+		ctrl.sp_high = ALIGN(frame->fp, THREAD_SIZE);
+	}
+
 	while (ctrl.entries > 0) {
 		int urc;
 		if ((ctrl.sp_high - ctrl.vrs[SP]) < sizeof(ctrl.vrs))
@@ -437,7 +465,7 @@ int unwind_frame(struct stackframe *frame)
 		urc = unwind_exec_insn(&ctrl);
 		if (urc < 0)
 			return urc;
-		if (ctrl.vrs[SP] < low || ctrl.vrs[SP] >= ctrl.sp_high)
+		if (ctrl.vrs[SP] < sp_low || ctrl.vrs[SP] > ctrl.sp_high)
 			return -URC_FAILURE;
 	}
 
@@ -452,6 +480,7 @@ int unwind_frame(struct stackframe *frame)
 	frame->sp = ctrl.vrs[SP];
 	frame->lr = ctrl.vrs[LR];
 	frame->pc = ctrl.vrs[PC];
+	frame->lr_addr = ctrl.lr_addr;
 
 	return URC_OK;
 }
@@ -475,7 +504,12 @@ void unwind_backtrace(struct pt_regs *regs, struct task_struct *tsk,
 		frame.fp = (unsigned long)__builtin_frame_address(0);
 		frame.sp = current_stack_pointer;
 		frame.lr = (unsigned long)__builtin_return_address(0);
-		frame.pc = (unsigned long)unwind_backtrace;
+		/* We are saving the stack and execution state at this
+		 * point, so we should ensure that frame.pc is within
+		 * this block of code.
+		 */
+here:
+		frame.pc = (unsigned long)&&here;
 	} else {
 		/* task blocked in __switch_to */
 		frame.fp = thread_saved_fp(tsk);
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index f02d617e3359..aa12b65a7fd6 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -138,12 +138,12 @@ SECTIONS
 #ifdef CONFIG_STRICT_KERNEL_RWX
 	. = ALIGN(1<<SECTION_SHIFT);
 #else
-	. = ALIGN(THREAD_SIZE);
+	. = ALIGN(THREAD_ALIGN);
 #endif
 	__init_end = .;
 
 	_sdata = .;
-	RW_DATA(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
+	RW_DATA(L1_CACHE_BYTES, PAGE_SIZE, THREAD_ALIGN)
 	_edata = .;
 
 	BSS_SECTION(0, 0, 0)
diff --git a/arch/arm/lib/backtrace-clang.S b/arch/arm/lib/backtrace-clang.S
index 5b2cdb1003e3..290c52a60fc6 100644
--- a/arch/arm/lib/backtrace-clang.S
+++ b/arch/arm/lib/backtrace-clang.S
@@ -144,7 +144,7 @@ for_each_frame:	tst	frame, mask		@ Check for address exceptions
  */
 1003:		ldr	sv_lr, [sv_fp, #4]	@ get saved lr from next frame
 
-		ldr	r0, [sv_lr, #-4]	@ get call instruction
+1004:		ldr	r0, [sv_lr, #-4]	@ get call instruction
 		ldr	r3, .Lopcode+4
 		and	r2, r3, r0		@ is this a bl call
 		teq	r2, r3
@@ -164,7 +164,7 @@ finished_setup:
 /*
  * Print the function (sv_pc) and where it was called from (sv_lr).
  */
-1004:		mov	r0, sv_pc
+		mov	r0, sv_pc
 
 		mov	r1, sv_lr
 		mov	r2, frame
@@ -197,6 +197,14 @@ finished_setup:
 
 		cmp	sv_fp, frame		@ next frame must be
 		mov	frame, sv_fp		@ above the current frame
+#ifdef CONFIG_IRQSTACKS
+		@
+		@ Kernel stacks may be discontiguous in memory. If the next
+		@ frame is below the previous frame, accept it as long as it
+		@ lives in kernel memory.
+		@
+		cmpls	sv_fp, #PAGE_OFFSET
+#endif
 		bhi	for_each_frame
 
 1006:		adr	r0, .Lbad
@@ -210,7 +218,7 @@ ENDPROC(c_backtrace)
 		.long	1001b, 1006b
 		.long	1002b, 1006b
 		.long	1003b, 1006b
-		.long	1004b, 1006b
+		.long	1004b, finished_setup
 		.long   1005b, 1006b
 		.popsection
 
diff --git a/arch/arm/lib/backtrace.S b/arch/arm/lib/backtrace.S
index e8408f22d4dc..293a2716bd20 100644
--- a/arch/arm/lib/backtrace.S
+++ b/arch/arm/lib/backtrace.S
@@ -98,6 +98,14 @@ for_each_frame:	tst	frame, mask		@ Check for address exceptions
 
 		cmp	sv_fp, frame		@ next frame must be
 		mov	frame, sv_fp		@ above the current frame
+#ifdef CONFIG_IRQSTACKS
+		@
+		@ Kernel stacks may be discontiguous in memory. If the next
+		@ frame is below the previous frame, accept it as long as it
+		@ lives in kernel memory.
+		@
+		cmpls	sv_fp, #PAGE_OFFSET
+#endif
 		bhi	for_each_frame
 
 1006:		adr	r0, .Lbad
diff --git a/arch/arm/lib/call_with_stack.S b/arch/arm/lib/call_with_stack.S
index 28b0341ae786..0a268a6c513c 100644
--- a/arch/arm/lib/call_with_stack.S
+++ b/arch/arm/lib/call_with_stack.S
@@ -8,25 +8,42 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
+#include <asm/unwind.h>
 
 /*
  * void call_with_stack(void (*fn)(void *), void *arg, void *sp)
  *
  * Change the stack to that pointed at by sp, then invoke fn(arg) with
  * the new stack.
+ *
+ * The sequence below follows the APCS frame convention for frame pointer
+ * unwinding, and implements the unwinder annotations needed by the EABI
+ * unwinder.
  */
-ENTRY(call_with_stack)
-	str	sp, [r2, #-4]!
-	str	lr, [r2, #-4]!
 
+ENTRY(call_with_stack)
+#if defined(CONFIG_UNWINDER_FRAME_POINTER) && defined(CONFIG_CC_IS_GCC)
+	mov	ip, sp
+	push	{fp, ip, lr, pc}
+	sub	fp, ip, #4
+#else
+UNWIND( .fnstart		)
+UNWIND( .save	{fpreg, lr}	)
+	push	{fpreg, lr}
+UNWIND( .setfp	fpreg, sp	)
+	mov	fpreg, sp
+#endif
 	mov	sp, r2
 	mov	r2, r0
 	mov	r0, r1
 
-	badr	lr, 1f
-	ret	r2
+	bl_r	r2
 
-1:	ldr	lr, [sp]
-	ldr	sp, [sp, #4]
-	ret	lr
+#if defined(CONFIG_UNWINDER_FRAME_POINTER) && defined(CONFIG_CC_IS_GCC)
+	ldmdb	fp, {fp, sp, pc}
+#else
+	mov	sp, fpreg
+	pop	{fpreg, pc}
+UNWIND( .fnend			)
+#endif
 ENDPROC(call_with_stack)
diff --git a/arch/arm/lib/copy_from_user.S b/arch/arm/lib/copy_from_user.S
index 480a20766137..270de7debd0f 100644
--- a/arch/arm/lib/copy_from_user.S
+++ b/arch/arm/lib/copy_from_user.S
@@ -91,18 +91,15 @@
 	strb\cond \reg, [\ptr], #1
 	.endm
 
-	.macro enter reg1 reg2
+	.macro enter regs:vararg
 	mov	r3, #0
-	stmdb	sp!, {r0, r2, r3, \reg1, \reg2}
+UNWIND( .save	{r0, r2, r3, \regs}		)
+	stmdb	sp!, {r0, r2, r3, \regs}
 	.endm
 
-	.macro usave reg1 reg2
-	UNWIND(	.save {r0, r2, r3, \reg1, \reg2}	)
-	.endm
-
-	.macro exit reg1 reg2
+	.macro exit regs:vararg
 	add	sp, sp, #8
-	ldmfd	sp!, {r0, \reg1, \reg2}
+	ldmfd	sp!, {r0, \regs}
 	.endm
 
 	.text
diff --git a/arch/arm/lib/copy_template.S b/arch/arm/lib/copy_template.S
index 810a805d36dc..8fbafb074fe9 100644
--- a/arch/arm/lib/copy_template.S
+++ b/arch/arm/lib/copy_template.S
@@ -69,13 +69,10 @@
  *	than one 32bit instruction in Thumb-2)
  */
 
-
-	UNWIND(	.fnstart			)
-		enter	r4, lr
-	UNWIND(	.fnend				)
-
 	UNWIND(	.fnstart			)
-		usave	r4, lr			  @ in first stmdb block
+		enter	r4, UNWIND(fpreg,) lr
+	UNWIND(	.setfp	fpreg, sp		)
+	UNWIND(	mov	fpreg, sp		)
 
 		subs	r2, r2, #4
 		blt	8f
@@ -86,12 +83,7 @@
 		bne	10f
 
 1:		subs	r2, r2, #(28)
-		stmfd	sp!, {r5 - r8}
-	UNWIND(	.fnend				)
-
-	UNWIND(	.fnstart			)
-		usave	r4, lr
-	UNWIND(	.save	{r5 - r8}		) @ in second stmfd block
+		stmfd	sp!, {r5, r6, r8, r9}
 		blt	5f
 
 	CALGN(	ands	ip, r0, #31		)
@@ -110,9 +102,9 @@
 	PLD(	pld	[r1, #92]		)
 
 3:	PLD(	pld	[r1, #124]		)
-4:		ldr8w	r1, r3, r4, r5, r6, r7, r8, ip, lr, abort=20f
+4:		ldr8w	r1, r3, r4, r5, r6, r8, r9, ip, lr, abort=20f
 		subs	r2, r2, #32
-		str8w	r0, r3, r4, r5, r6, r7, r8, ip, lr, abort=20f
+		str8w	r0, r3, r4, r5, r6, r8, r9, ip, lr, abort=20f
 		bge	3b
 	PLD(	cmn	r2, #96			)
 	PLD(	bge	4b			)
@@ -132,8 +124,8 @@
 		ldr1w	r1, r4, abort=20f
 		ldr1w	r1, r5, abort=20f
 		ldr1w	r1, r6, abort=20f
-		ldr1w	r1, r7, abort=20f
 		ldr1w	r1, r8, abort=20f
+		ldr1w	r1, r9, abort=20f
 		ldr1w	r1, lr, abort=20f
 
 #if LDR1W_SHIFT < STR1W_SHIFT
@@ -150,17 +142,14 @@
 		str1w	r0, r4, abort=20f
 		str1w	r0, r5, abort=20f
 		str1w	r0, r6, abort=20f
-		str1w	r0, r7, abort=20f
 		str1w	r0, r8, abort=20f
+		str1w	r0, r9, abort=20f
 		str1w	r0, lr, abort=20f
 
 	CALGN(	bcs	2b			)
 
-7:		ldmfd	sp!, {r5 - r8}
-	UNWIND(	.fnend				) @ end of second stmfd block
+7:		ldmfd	sp!, {r5, r6, r8, r9}
 
-	UNWIND(	.fnstart			)
-		usave	r4, lr			  @ still in first stmdb block
 8:		movs	r2, r2, lsl #31
 		ldr1b	r1, r3, ne, abort=21f
 		ldr1b	r1, r4, cs, abort=21f
@@ -169,7 +158,7 @@
 		str1b	r0, r4, cs, abort=21f
 		str1b	r0, ip, cs, abort=21f
 
-		exit	r4, pc
+		exit	r4, UNWIND(fpreg,) pc
 
 9:		rsb	ip, ip, #4
 		cmp	ip, #2
@@ -189,13 +178,10 @@
 		ldr1w	r1, lr, abort=21f
 		beq	17f
 		bgt	18f
-	UNWIND(	.fnend				)
 
 
 		.macro	forward_copy_shift pull push
 
-	UNWIND(	.fnstart			)
-		usave	r4, lr			  @ still in first stmdb block
 		subs	r2, r2, #28
 		blt	14f
 
@@ -205,12 +191,8 @@
 	CALGN(	subcc	r2, r2, ip		)
 	CALGN(	bcc	15f			)
 
-11:		stmfd	sp!, {r5 - r9}
-	UNWIND(	.fnend				)
+11:		stmfd	sp!, {r5, r6, r8 - r10}
 
-	UNWIND(	.fnstart			)
-		usave	r4, lr
-	UNWIND(	.save	{r5 - r9}		) @ in new second stmfd block
 	PLD(	pld	[r1, #0]		)
 	PLD(	subs	r2, r2, #96		)
 	PLD(	pld	[r1, #28]		)
@@ -219,35 +201,32 @@
 	PLD(	pld	[r1, #92]		)
 
 12:	PLD(	pld	[r1, #124]		)
-13:		ldr4w	r1, r4, r5, r6, r7, abort=19f
+13:		ldr4w	r1, r4, r5, r6, r8, abort=19f
 		mov	r3, lr, lspull #\pull
 		subs	r2, r2, #32
-		ldr4w	r1, r8, r9, ip, lr, abort=19f
+		ldr4w	r1, r9, r10, ip, lr, abort=19f
 		orr	r3, r3, r4, lspush #\push
 		mov	r4, r4, lspull #\pull
 		orr	r4, r4, r5, lspush #\push
 		mov	r5, r5, lspull #\pull
 		orr	r5, r5, r6, lspush #\push
 		mov	r6, r6, lspull #\pull
-		orr	r6, r6, r7, lspush #\push
-		mov	r7, r7, lspull #\pull
-		orr	r7, r7, r8, lspush #\push
+		orr	r6, r6, r8, lspush #\push
 		mov	r8, r8, lspull #\pull
 		orr	r8, r8, r9, lspush #\push
 		mov	r9, r9, lspull #\pull
-		orr	r9, r9, ip, lspush #\push
+		orr	r9, r9, r10, lspush #\push
+		mov	r10, r10, lspull #\pull
+		orr	r10, r10, ip, lspush #\push
 		mov	ip, ip, lspull #\pull
 		orr	ip, ip, lr, lspush #\push
-		str8w	r0, r3, r4, r5, r6, r7, r8, r9, ip, abort=19f
+		str8w	r0, r3, r4, r5, r6, r8, r9, r10, ip, abort=19f
 		bge	12b
 	PLD(	cmn	r2, #96			)
 	PLD(	bge	13b			)
 
-		ldmfd	sp!, {r5 - r9}
-	UNWIND(	.fnend				) @ end of the second stmfd block
+		ldmfd	sp!, {r5, r6, r8 - r10}
 
-	UNWIND(	.fnstart			)
-		usave	r4, lr			  @ still in first stmdb block
 14:		ands	ip, r2, #28
 		beq	16f
 
@@ -262,7 +241,6 @@
 
 16:		sub	r1, r1, #(\push / 8)
 		b	8b
-	UNWIND(	.fnend				)
 
 		.endm
 
@@ -273,6 +251,7 @@
 
 18:		forward_copy_shift	pull=24	push=8
 
+	UNWIND(	.fnend				)
 
 /*
  * Abort preamble and completion macros.
@@ -282,13 +261,13 @@
  */
 
 	.macro	copy_abort_preamble
-19:	ldmfd	sp!, {r5 - r9}
+19:	ldmfd	sp!, {r5, r6, r8 - r10}
 	b	21f
-20:	ldmfd	sp!, {r5 - r8}
+20:	ldmfd	sp!, {r5, r6, r8, r9}
 21:
 	.endm
 
 	.macro	copy_abort_end
-	ldmfd	sp!, {r4, pc}
+	ldmfd	sp!, {r4, UNWIND(fpreg,) pc}
 	.endm
 
diff --git a/arch/arm/lib/copy_to_user.S b/arch/arm/lib/copy_to_user.S
index 842ea5ede485..fac49e57cc0b 100644
--- a/arch/arm/lib/copy_to_user.S
+++ b/arch/arm/lib/copy_to_user.S
@@ -90,18 +90,15 @@
 	strusr	\reg, \ptr, 1, \cond, abort=\abort
 	.endm
 
-	.macro enter reg1 reg2
+	.macro enter regs:vararg
 	mov	r3, #0
-	stmdb	sp!, {r0, r2, r3, \reg1, \reg2}
+UNWIND( .save	{r0, r2, r3, \regs}		)
+	stmdb	sp!, {r0, r2, r3, \regs}
 	.endm
 
-	.macro usave reg1 reg2
-	UNWIND(	.save {r0, r2, r3, \reg1, \reg2}	)
-	.endm
-
-	.macro exit reg1 reg2
+	.macro exit regs:vararg
 	add	sp, sp, #8
-	ldmfd	sp!, {r0, \reg1, \reg2}
+	ldmfd	sp!, {r0, \regs}
 	.endm
 
 	.text
diff --git a/arch/arm/lib/memcpy.S b/arch/arm/lib/memcpy.S
index e4caf48c089f..90f2b645aa0d 100644
--- a/arch/arm/lib/memcpy.S
+++ b/arch/arm/lib/memcpy.S
@@ -42,16 +42,13 @@
 	strb\cond \reg, [\ptr], #1
 	.endm
 
-	.macro enter reg1 reg2
-	stmdb sp!, {r0, \reg1, \reg2}
+	.macro enter regs:vararg
+UNWIND( .save	{r0, \regs}		)
+	stmdb sp!, {r0, \regs}
 	.endm
 
-	.macro usave reg1 reg2
-	UNWIND(	.save	{r0, \reg1, \reg2}	)
-	.endm
-
-	.macro exit reg1 reg2
-	ldmfd sp!, {r0, \reg1, \reg2}
+	.macro exit regs:vararg
+	ldmfd sp!, {r0, \regs}
 	.endm
 
 	.text
diff --git a/arch/arm/lib/memmove.S b/arch/arm/lib/memmove.S
index 6fecc12a1f51..6410554039fd 100644
--- a/arch/arm/lib/memmove.S
+++ b/arch/arm/lib/memmove.S
@@ -31,12 +31,13 @@ WEAK(memmove)
 		subs	ip, r0, r1
 		cmphi	r2, ip
 		bls	__memcpy
-
-		stmfd	sp!, {r0, r4, lr}
 	UNWIND(	.fnend				)
 
 	UNWIND(	.fnstart			)
-	UNWIND(	.save	{r0, r4, lr}		) @ in first stmfd block
+	UNWIND(	.save	{r0, r4, fpreg, lr}	)
+		stmfd	sp!, {r0, r4, UNWIND(fpreg,) lr}
+	UNWIND(	.setfp	fpreg, sp		)
+	UNWIND(	mov	fpreg, sp		)
 		add	r1, r1, r2
 		add	r0, r0, r2
 		subs	r2, r2, #4
@@ -48,12 +49,7 @@ WEAK(memmove)
 		bne	10f
 
 1:		subs	r2, r2, #(28)
-		stmfd	sp!, {r5 - r8}
-	UNWIND(	.fnend				)
-
-	UNWIND(	.fnstart			)
-	UNWIND(	.save	{r0, r4, lr}		)
-	UNWIND(	.save	{r5 - r8}		) @ in second stmfd block
+		stmfd	sp!, {r5, r6, r8, r9}
 		blt	5f
 
 	CALGN(	ands	ip, r0, #31		)
@@ -72,9 +68,9 @@ WEAK(memmove)
 	PLD(	pld	[r1, #-96]		)
 
 3:	PLD(	pld	[r1, #-128]		)
-4:		ldmdb	r1!, {r3, r4, r5, r6, r7, r8, ip, lr}
+4:		ldmdb	r1!, {r3, r4, r5, r6, r8, r9, ip, lr}
 		subs	r2, r2, #32
-		stmdb	r0!, {r3, r4, r5, r6, r7, r8, ip, lr}
+		stmdb	r0!, {r3, r4, r5, r6, r8, r9, ip, lr}
 		bge	3b
 	PLD(	cmn	r2, #96			)
 	PLD(	bge	4b			)
@@ -88,8 +84,8 @@ WEAK(memmove)
 		W(ldr)	r4, [r1, #-4]!
 		W(ldr)	r5, [r1, #-4]!
 		W(ldr)	r6, [r1, #-4]!
-		W(ldr)	r7, [r1, #-4]!
 		W(ldr)	r8, [r1, #-4]!
+		W(ldr)	r9, [r1, #-4]!
 		W(ldr)	lr, [r1, #-4]!
 
 		add	pc, pc, ip
@@ -99,17 +95,13 @@ WEAK(memmove)
 		W(str)	r4, [r0, #-4]!
 		W(str)	r5, [r0, #-4]!
 		W(str)	r6, [r0, #-4]!
-		W(str)	r7, [r0, #-4]!
 		W(str)	r8, [r0, #-4]!
+		W(str)	r9, [r0, #-4]!
 		W(str)	lr, [r0, #-4]!
 
 	CALGN(	bcs	2b			)
 
-7:		ldmfd	sp!, {r5 - r8}
-	UNWIND(	.fnend				) @ end of second stmfd block
-
-	UNWIND(	.fnstart			)
-	UNWIND(	.save	{r0, r4, lr}		) @ still in first stmfd block
+7:		ldmfd	sp!, {r5, r6, r8, r9}
 
 8:		movs	r2, r2, lsl #31
 		ldrbne	r3, [r1, #-1]!
@@ -118,7 +110,7 @@ WEAK(memmove)
 		strbne	r3, [r0, #-1]!
 		strbcs	r4, [r0, #-1]!
 		strbcs	ip, [r0, #-1]
-		ldmfd	sp!, {r0, r4, pc}
+		ldmfd	sp!, {r0, r4, UNWIND(fpreg,) pc}
 
 9:		cmp	ip, #2
 		ldrbgt	r3, [r1, #-1]!
@@ -137,13 +129,10 @@ WEAK(memmove)
 		ldr	r3, [r1, #0]
 		beq	17f
 		blt	18f
-	UNWIND(	.fnend				)
 
 
 		.macro	backward_copy_shift push pull
 
-	UNWIND(	.fnstart			)
-	UNWIND(	.save	{r0, r4, lr}		) @ still in first stmfd block
 		subs	r2, r2, #28
 		blt	14f
 
@@ -152,12 +141,7 @@ WEAK(memmove)
 	CALGN(	subcc	r2, r2, ip		)
 	CALGN(	bcc	15f			)
 
-11:		stmfd	sp!, {r5 - r9}
-	UNWIND(	.fnend				)
-
-	UNWIND(	.fnstart			)
-	UNWIND(	.save	{r0, r4, lr}		)
-	UNWIND(	.save	{r5 - r9}		) @ in new second stmfd block
+11:		stmfd	sp!, {r5, r6, r8 - r10}
 
 	PLD(	pld	[r1, #-4]		)
 	PLD(	subs	r2, r2, #96		)
@@ -167,35 +151,31 @@ WEAK(memmove)
 	PLD(	pld	[r1, #-96]		)
 
 12:	PLD(	pld	[r1, #-128]		)
-13:		ldmdb   r1!, {r7, r8, r9, ip}
+13:		ldmdb   r1!, {r8, r9, r10, ip}
 		mov     lr, r3, lspush #\push
 		subs    r2, r2, #32
 		ldmdb   r1!, {r3, r4, r5, r6}
 		orr     lr, lr, ip, lspull #\pull
 		mov     ip, ip, lspush #\push
-		orr     ip, ip, r9, lspull #\pull
+		orr     ip, ip, r10, lspull #\pull
+		mov     r10, r10, lspush #\push
+		orr     r10, r10, r9, lspull #\pull
 		mov     r9, r9, lspush #\push
 		orr     r9, r9, r8, lspull #\pull
 		mov     r8, r8, lspush #\push
-		orr     r8, r8, r7, lspull #\pull
-		mov     r7, r7, lspush #\push
-		orr     r7, r7, r6, lspull #\pull
+		orr     r8, r8, r6, lspull #\pull
 		mov     r6, r6, lspush #\push
 		orr     r6, r6, r5, lspull #\pull
 		mov     r5, r5, lspush #\push
 		orr     r5, r5, r4, lspull #\pull
 		mov     r4, r4, lspush #\push
 		orr     r4, r4, r3, lspull #\pull
-		stmdb   r0!, {r4 - r9, ip, lr}
+		stmdb   r0!, {r4 - r6, r8 - r10, ip, lr}
 		bge	12b
 	PLD(	cmn	r2, #96			)
 	PLD(	bge	13b			)
 
-		ldmfd	sp!, {r5 - r9}
-	UNWIND(	.fnend				) @ end of the second stmfd block
-
-	UNWIND(	.fnstart			)
-	UNWIND(	.save {r0, r4, lr}		) @ still in first stmfd block
+		ldmfd	sp!, {r5, r6, r8 - r10}
 
 14:		ands	ip, r2, #28
 		beq	16f
@@ -211,7 +191,6 @@ WEAK(memmove)
 
 16:		add	r1, r1, #(\pull / 8)
 		b	8b
-	UNWIND(	.fnend				)
 
 		.endm
 
@@ -222,5 +201,6 @@ WEAK(memmove)
 
 18:		backward_copy_shift	push=24	pull=8
 
+	UNWIND(	.fnend				)
 ENDPROC(memmove)
 ENDPROC(__memmove)
diff --git a/arch/arm/lib/memset.S b/arch/arm/lib/memset.S
index 9817cb258c1a..d71ab61430b2 100644
--- a/arch/arm/lib/memset.S
+++ b/arch/arm/lib/memset.S
@@ -28,16 +28,16 @@ UNWIND( .fnstart         )
 	mov	r3, r1
 7:	cmp	r2, #16
 	blt	4f
+UNWIND( .fnend              )
 
 #if ! CALGN(1)+0
 
 /*
  * We need 2 extra registers for this loop - use r8 and the LR
  */
-	stmfd	sp!, {r8, lr}
-UNWIND( .fnend              )
 UNWIND( .fnstart            )
 UNWIND( .save {r8, lr}      )
+	stmfd	sp!, {r8, lr}
 	mov	r8, r1
 	mov	lr, r3
 
@@ -66,10 +66,9 @@ UNWIND( .fnend              )
  * whole cache lines at once.
  */
 
-	stmfd	sp!, {r4-r8, lr}
-UNWIND( .fnend                 )
 UNWIND( .fnstart               )
 UNWIND( .save {r4-r8, lr}      )
+	stmfd	sp!, {r4-r8, lr}
 	mov	r4, r1
 	mov	r5, r3
 	mov	r6, r1
diff --git a/arch/arm/lib/uaccess_with_memcpy.c b/arch/arm/lib/uaccess_with_memcpy.c
index 106f83a5ea6d..c30b689bec2e 100644
--- a/arch/arm/lib/uaccess_with_memcpy.c
+++ b/arch/arm/lib/uaccess_with_memcpy.c
@@ -92,11 +92,6 @@ __copy_to_user_memcpy(void __user *to, const void *from, unsigned long n)
 	unsigned long ua_flags;
 	int atomic;
 
-	if (uaccess_kernel()) {
-		memcpy((void *)to, from, n);
-		return 0;
-	}
-
 	/* the mmap semaphore is taken only if not in an atomic context */
 	atomic = faulthandler_disabled();
 
@@ -165,11 +160,6 @@ __clear_user_memset(void __user *addr, unsigned long n)
 {
 	unsigned long ua_flags;
 
-	if (uaccess_kernel()) {
-		memset((void *)addr, 0, n);
-		return 0;
-	}
-
 	mmap_read_lock(current->mm);
 	while (n) {
 		pte_t *pte;
diff --git a/arch/arm/lib/xor-neon.c b/arch/arm/lib/xor-neon.c
index b99dd8e1c93f..522510baed49 100644
--- a/arch/arm/lib/xor-neon.c
+++ b/arch/arm/lib/xor-neon.c
@@ -17,17 +17,11 @@ MODULE_LICENSE("GPL");
 /*
  * Pull in the reference implementations while instructing GCC (through
  * -ftree-vectorize) to attempt to exploit implicit parallelism and emit
- * NEON instructions.
+ * NEON instructions. Clang does this by default at O2 so no pragma is
+ * needed.
  */
-#if __GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 6)
+#ifdef CONFIG_CC_IS_GCC
 #pragma GCC optimize "tree-vectorize"
-#else
-/*
- * While older versions of GCC do not generate incorrect code, they fail to
- * recognize the parallel nature of these functions, and emit plain ARM code,
- * which is known to be slower than the optimized ARM code in asm-arm/xor.h.
- */
-#warning This code requires at least version 4.6 of GCC
 #endif
 
 #pragma GCC diagnostic ignored "-Wunused-variable"
diff --git a/arch/nds32/kernel/vdso/.gitignore b/arch/arm/mach-airoha/Makefile
index 652e31d82582..a5857d0d02eb 100644
--- a/arch/nds32/kernel/vdso/.gitignore
+++ b/arch/arm/mach-airoha/Makefile
@@ -1,2 +1,2 @@
 # SPDX-License-Identifier: GPL-2.0-only
-vdso.lds
+obj-y			+= airoha.o
diff --git a/arch/arm/mach-airoha/airoha.c b/arch/arm/mach-airoha/airoha.c
new file mode 100644
index 000000000000..ea23b5abb478
--- /dev/null
+++ b/arch/arm/mach-airoha/airoha.c
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Device Tree support for Airoha SoCs
+ *
+ * Copyright (c) 2022 Felix Fietkau <nbd@nbd.name>
+ */
+#include <asm/mach/arch.h>
+
+static const char * const airoha_board_dt_compat[] = {
+	"airoha,en7523",
+	NULL,
+};
+
+DT_MACHINE_START(MEDIATEK_DT, "Airoha Cortex-A53 (Device Tree)")
+	.dt_compat	= airoha_board_dt_compat,
+MACHINE_END
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 02f6b108fd5d..279810381256 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -63,6 +63,7 @@ config SOC_SAMA7G5
 	select HAVE_AT91_GENERATED_CLK
 	select HAVE_AT91_SAM9X60_PLL
 	select HAVE_AT91_UTMI
+	select PM_OPP
 	select SOC_SAMA7
 	help
 	  Select this if you are using one of Microchip's SAMA7G5 family SoC.
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index dd6f4ce3f766..0fd609e26615 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -605,6 +605,30 @@ static void at91sam9_sdram_standby(void)
 		at91_ramc_write(1, AT91_SDRAMC_LPR, saved_lpr1);
 }
 
+static void sama7g5_standby(void)
+{
+	int pwrtmg, ratio;
+
+	pwrtmg = readl(soc_pm.data.ramc[0] + UDDRC_PWRCTL);
+	ratio = readl(soc_pm.data.pmc + AT91_PMC_RATIO);
+
+	/*
+	 * Place RAM into self-refresh after a maximum idle clocks. The maximum
+	 * idle clocks is configured by bootloader in
+	 * UDDRC_PWRMGT.SELFREF_TO_X32.
+	 */
+	writel(pwrtmg | UDDRC_PWRCTL_SELFREF_EN,
+	       soc_pm.data.ramc[0] + UDDRC_PWRCTL);
+	/* Divide CPU clock by 16. */
+	writel(ratio & ~AT91_PMC_RATIO_RATIO, soc_pm.data.pmc + AT91_PMC_RATIO);
+
+	cpu_do_idle();
+
+	/* Restore previous configuration. */
+	writel(ratio, soc_pm.data.pmc + AT91_PMC_RATIO);
+	writel(pwrtmg, soc_pm.data.ramc[0] + UDDRC_PWRCTL);
+}
+
 struct ramc_info {
 	void (*idle)(void);
 	unsigned int memctrl;
@@ -615,6 +639,7 @@ static const struct ramc_info ramc_infos[] __initconst = {
 	{ .idle = at91sam9_sdram_standby, .memctrl = AT91_MEMCTRL_SDRAMC},
 	{ .idle = at91_ddr_standby, .memctrl = AT91_MEMCTRL_DDRSDR},
 	{ .idle = sama5d3_ddr_standby, .memctrl = AT91_MEMCTRL_DDRSDR},
+	{ .idle = sama7g5_standby, },
 };
 
 static const struct of_device_id ramc_ids[] __initconst = {
@@ -622,7 +647,7 @@ static const struct of_device_id ramc_ids[] __initconst = {
 	{ .compatible = "atmel,at91sam9260-sdramc", .data = &ramc_infos[1] },
 	{ .compatible = "atmel,at91sam9g45-ddramc", .data = &ramc_infos[2] },
 	{ .compatible = "atmel,sama5d3-ddramc", .data = &ramc_infos[3] },
-	{ .compatible = "microchip,sama7g5-uddrc", },
+	{ .compatible = "microchip,sama7g5-uddrc", .data = &ramc_infos[4], },
 	{ /*sentinel*/ }
 };
 
diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
index fdb4f63ecde4..abe4ced33eda 100644
--- a/arch/arm/mach-at91/pm_suspend.S
+++ b/arch/arm/mach-at91/pm_suspend.S
@@ -159,7 +159,7 @@ sr_ena_1:
 
 	/* Switch to self-refresh. */
 	ldr	tmp1, [r2, #UDDRC_PWRCTL]
-	orr	tmp1, tmp1, #UDDRC_PWRCTRL_SELFREF_SW
+	orr	tmp1, tmp1, #UDDRC_PWRCTL_SELFREF_SW
 	str	tmp1, [r2, #UDDRC_PWRCTL]
 
 sr_ena_2:
@@ -276,7 +276,7 @@ sr_dis_5:
 
 	/* Trigger self-refresh exit. */
 	ldr	tmp1, [r2, #UDDRC_PWRCTL]
-	bic	tmp1, tmp1, #UDDRC_PWRCTRL_SELFREF_SW
+	bic	tmp1, tmp1, #UDDRC_PWRCTL_SELFREF_SW
 	str	tmp1, [r2, #UDDRC_PWRCTL]
 
 sr_dis_6:
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index bd3f82788ebc..8db655c3e321 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -185,7 +185,6 @@ config ARCH_BCM_53573
 config ARCH_BCM_63XX
 	bool "Broadcom BCM63xx DSL SoC"
 	depends on ARCH_MULTI_V7
-	depends on MMU
 	select ARCH_HAS_RESET_CONTROLLER
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_764369 if SMP
diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile
index 7baa8c9427d5..b2394ddb0558 100644
--- a/arch/arm/mach-bcm/Makefile
+++ b/arch/arm/mach-bcm/Makefile
@@ -40,6 +40,7 @@ obj-$(CONFIG_ARCH_BCM_MOBILE_L2_CACHE) += kona_l2_cache.o
 
 # Support for secure monitor traps
 obj-$(CONFIG_ARCH_BCM_MOBILE_SMC) += bcm_kona_smc.o
+CFLAGS_REMOVE_bcm_kona_smc.o += $(CC_FLAGS_FTRACE)
 
 # BCM2835
 ifeq ($(CONFIG_ARCH_BCM2835),y)
diff --git a/arch/arm/mach-dove/irq.c b/arch/arm/mach-dove/irq.c
index 31ccbcee2627..d36f6b8269c2 100644
--- a/arch/arm/mach-dove/irq.c
+++ b/arch/arm/mach-dove/irq.c
@@ -73,12 +73,12 @@ void __init dove_init_irq(void)
 	/*
 	 * Initialize gpiolib for GPIOs 0-71.
 	 */
-	orion_gpio_init(NULL, 0, 32, DOVE_GPIO_LO_VIRT_BASE, 0,
+	orion_gpio_init(0, 32, DOVE_GPIO_LO_VIRT_BASE, 0,
 			IRQ_DOVE_GPIO_START, gpio0_irqs);
 
-	orion_gpio_init(NULL, 32, 32, DOVE_GPIO_HI_VIRT_BASE, 0,
+	orion_gpio_init(32, 32, DOVE_GPIO_HI_VIRT_BASE, 0,
 			IRQ_DOVE_GPIO_START + 32, gpio1_irqs);
 
-	orion_gpio_init(NULL, 64, 8, DOVE_GPIO2_VIRT_BASE, 0,
+	orion_gpio_init(64, 8, DOVE_GPIO2_VIRT_BASE, 0,
 			IRQ_DOVE_GPIO_START + 64, gpio2_irqs);
 }
diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c
index 2eaf2dbb8e81..2da5b60b59e2 100644
--- a/arch/arm/mach-exynos/firmware.c
+++ b/arch/arm/mach-exynos/firmware.c
@@ -60,8 +60,10 @@ static int exynos_cpu_boot(int cpu)
 	/*
 	 * Exynos3250 doesn't need to send smc command for secondary CPU boot
 	 * because Exynos3250 removes WFE in secure mode.
+	 *
+	 * On Exynos5 devices the call is ignored by trustzone firmware.
 	 */
-	if (soc_is_exynos3250())
+	if (!soc_is_exynos4210() && !soc_is_exynos4412())
 		return 0;
 
 	/*
diff --git a/arch/arm/mach-exynos/mcpm-exynos.c b/arch/arm/mach-exynos/mcpm-exynos.c
index cd861c57d5ad..fd0dbeb93357 100644
--- a/arch/arm/mach-exynos/mcpm-exynos.c
+++ b/arch/arm/mach-exynos/mcpm-exynos.c
@@ -35,7 +35,6 @@ static bool secure_firmware __ro_after_init;
  */
 #define exynos_v7_exit_coherency_flush(level) \
 	asm volatile( \
-	"stmfd	sp!, {fp, ip}\n\t"\
 	"mrc	p15, 0, r0, c1, c0, 0	@ get SCTLR\n\t" \
 	"bic	r0, r0, #"__stringify(CR_C)"\n\t" \
 	"mcr	p15, 0, r0, c1, c0, 0	@ set SCTLR\n\t" \
@@ -50,11 +49,10 @@ static bool secure_firmware __ro_after_init;
 	"mcr	p15, 0, r0, c1, c0, 1	@ set ACTLR\n\t" \
 	"isb\n\t" \
 	"dsb\n\t" \
-	"ldmfd	sp!, {fp, ip}" \
 	: \
 	: "Ir" (pmu_base_addr + S5P_INFORM0) \
-	: "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", \
-	  "r9", "r10", "lr", "memory")
+	: "r0", "r1", "r2", "r3", "r4", "r5", "r6", \
+	  "r9", "r10", "ip", "lr", "memory")
 
 static int exynos_cpu_powerup(unsigned int cpu, unsigned int cluster)
 {
diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c
index eee095f0e2f6..322495df271d 100644
--- a/arch/arm/mach-footbridge/common.c
+++ b/arch/arm/mach-footbridge/common.c
@@ -27,6 +27,91 @@
 
 #include "common.h"
 
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <asm/hardware/dec21285.h>
+
+static int dc21285_get_irq(void)
+{
+	void __iomem *irqstatus = (void __iomem *)CSR_IRQ_STATUS;
+	u32 mask = readl(irqstatus);
+
+	if (mask & IRQ_MASK_SDRAMPARITY)
+		return IRQ_SDRAMPARITY;
+
+	if (mask & IRQ_MASK_UART_RX)
+		return IRQ_CONRX;
+
+	if (mask & IRQ_MASK_DMA1)
+		return IRQ_DMA1;
+
+	if (mask & IRQ_MASK_DMA2)
+		return IRQ_DMA2;
+
+	if (mask & IRQ_MASK_IN0)
+		return IRQ_IN0;
+
+	if (mask & IRQ_MASK_IN1)
+		return IRQ_IN1;
+
+	if (mask & IRQ_MASK_IN2)
+		return IRQ_IN2;
+
+	if (mask & IRQ_MASK_IN3)
+		return IRQ_IN3;
+
+	if (mask & IRQ_MASK_PCI)
+		return IRQ_PCI;
+
+	if (mask & IRQ_MASK_DOORBELLHOST)
+		return IRQ_DOORBELLHOST;
+
+	if (mask & IRQ_MASK_I2OINPOST)
+		return IRQ_I2OINPOST;
+
+	if (mask & IRQ_MASK_TIMER1)
+		return IRQ_TIMER1;
+
+	if (mask & IRQ_MASK_TIMER2)
+		return IRQ_TIMER2;
+
+	if (mask & IRQ_MASK_TIMER3)
+		return IRQ_TIMER3;
+
+	if (mask & IRQ_MASK_UART_TX)
+		return IRQ_CONTX;
+
+	if (mask & IRQ_MASK_PCI_ABORT)
+		return IRQ_PCI_ABORT;
+
+	if (mask & IRQ_MASK_PCI_SERR)
+		return IRQ_PCI_SERR;
+
+	if (mask & IRQ_MASK_DISCARD_TIMER)
+		return IRQ_DISCARD_TIMER;
+
+	if (mask & IRQ_MASK_PCI_DPERR)
+		return IRQ_PCI_DPERR;
+
+	if (mask & IRQ_MASK_PCI_PERR)
+		return IRQ_PCI_PERR;
+
+	return 0;
+}
+
+static void dc21285_handle_irq(struct pt_regs *regs)
+{
+	int irq;
+	do {
+		irq = dc21285_get_irq();
+		if (!irq)
+			break;
+
+		generic_handle_irq(irq);
+	} while (1);
+}
+
+
 unsigned int mem_fclk_21285 = 50000000;
 
 EXPORT_SYMBOL(mem_fclk_21285);
@@ -108,6 +193,8 @@ static void __init __fb_init_irq(void)
 
 void __init footbridge_init_irq(void)
 {
+	set_handle_irq(dc21285_handle_irq);
+
 	__fb_init_irq();
 
 	if (!footbridge_cfn_mode())
diff --git a/arch/arm/mach-footbridge/include/mach/entry-macro.S b/arch/arm/mach-footbridge/include/mach/entry-macro.S
deleted file mode 100644
index dabbd5c54a78..000000000000
--- a/arch/arm/mach-footbridge/include/mach/entry-macro.S
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * arch/arm/mach-footbridge/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for footbridge-based platforms
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <asm/hardware/dec21285.h>
-
-		.equ	dc21285_high, ARMCSR_BASE & 0xff000000
-		.equ	dc21285_low, ARMCSR_BASE & 0x00ffffff
-
-		.macro  get_irqnr_preamble, base, tmp
-		mov	\base, #dc21285_high
-		.if	dc21285_low
-		orr	\base, \base, #dc21285_low
-		.endif
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\irqstat, [\base, #0x180]	@ get interrupts
-
-		mov	\irqnr, #IRQ_SDRAMPARITY
-		tst	\irqstat, #IRQ_MASK_SDRAMPARITY
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_UART_RX
-		movne	\irqnr, #IRQ_CONRX
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_DMA1
-		movne	\irqnr, #IRQ_DMA1
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_DMA2
-		movne	\irqnr, #IRQ_DMA2
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_IN0
-		movne	\irqnr, #IRQ_IN0
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_IN1
-		movne	\irqnr, #IRQ_IN1
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_IN2
-		movne	\irqnr, #IRQ_IN2
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_IN3
-		movne	\irqnr, #IRQ_IN3
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_PCI
-		movne	\irqnr, #IRQ_PCI
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_DOORBELLHOST
-		movne	\irqnr, #IRQ_DOORBELLHOST
-		bne     1001f
-
-		tst	\irqstat, #IRQ_MASK_I2OINPOST
-		movne	\irqnr, #IRQ_I2OINPOST
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_TIMER1
-		movne	\irqnr, #IRQ_TIMER1
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_TIMER2
-		movne	\irqnr, #IRQ_TIMER2
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_TIMER3
-		movne	\irqnr, #IRQ_TIMER3
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_UART_TX
-		movne	\irqnr, #IRQ_CONTX
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_PCI_ABORT
-		movne	\irqnr, #IRQ_PCI_ABORT
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_PCI_SERR
-		movne	\irqnr, #IRQ_PCI_SERR
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_DISCARD_TIMER
-		movne	\irqnr, #IRQ_DISCARD_TIMER
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_PCI_DPERR
-		movne	\irqnr, #IRQ_PCI_DPERR
-		bne	1001f
-
-		tst	\irqstat, #IRQ_MASK_PCI_PERR
-		movne	\irqnr, #IRQ_PCI_PERR
-1001:
-		.endm
-
diff --git a/arch/arm/mach-footbridge/include/mach/hardware.h b/arch/arm/mach-footbridge/include/mach/hardware.h
index ecaf6e7388d9..985ad3a95671 100644
--- a/arch/arm/mach-footbridge/include/mach/hardware.h
+++ b/arch/arm/mach-footbridge/include/mach/hardware.h
@@ -21,32 +21,26 @@
  * 0xf0000000	0x80000000	16MB	ISA memory
  */
 
-#ifdef CONFIG_MMU
-#define MMU_IO(a, b)	(a)
-#else
-#define MMU_IO(a, b)	(b)
-#endif
-
 #define XBUS_SIZE		0x00100000
-#define XBUS_BASE		MMU_IO(0xff800000, 0x40000000)
+#define XBUS_BASE		0xff800000
 
 #define ARMCSR_SIZE		0x00100000
-#define ARMCSR_BASE		MMU_IO(0xfe000000, 0x42000000)
+#define ARMCSR_BASE		0xfe000000
 
 #define WFLUSH_SIZE		0x00100000
-#define WFLUSH_BASE		MMU_IO(0xfd000000, 0x78000000)
+#define WFLUSH_BASE		0xfd000000
 
 #define PCIIACK_SIZE		0x00100000
-#define PCIIACK_BASE		MMU_IO(0xfc000000, 0x79000000)
+#define PCIIACK_BASE		0xfc000000
 
 #define PCICFG1_SIZE		0x01000000
-#define PCICFG1_BASE		MMU_IO(0xfb000000, 0x7a000000)
+#define PCICFG1_BASE		0xfb000000
 
 #define PCICFG0_SIZE		0x01000000
-#define PCICFG0_BASE		MMU_IO(0xfa000000, 0x7b000000)
+#define PCICFG0_BASE		0xfa000000
 
 #define PCIMEM_SIZE		0x01000000
-#define PCIMEM_BASE		MMU_IO(0xf0000000, 0x80000000)
+#define PCIMEM_BASE		0xf0000000
 
 #define XBUS_CS2		0x40012000
 
diff --git a/arch/arm/mach-footbridge/include/mach/io.h b/arch/arm/mach-footbridge/include/mach/io.h
deleted file mode 100644
index 4e18b921373f..000000000000
--- a/arch/arm/mach-footbridge/include/mach/io.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- *  arch/arm/mach-footbridge/include/mach/io.h
- *
- *  Copyright (C) 1997-1999 Russell King
- *
- *  Modifications:
- *   06-12-1997	RMK	Created.
- *   07-04-1999	RMK	Major cleanup
- */
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-/*
- * Translation of various i/o addresses to host addresses for !CONFIG_MMU
- */
-#define PCIO_BASE       0x7c000000
-#define __io(a)			((void __iomem *)(PCIO_BASE + (a)))
-
-#endif
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index f296bac467c8..c5a59158722b 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -227,6 +227,13 @@ config SOC_IMX7ULP
 	help
 	  This enables support for Freescale i.MX7 Ultra Low Power processor.
 
+config SOC_IMXRT
+	bool "i.MXRT support"
+	depends on ARM_SINGLE_ARMV7M
+	select ARMV7M_SYSTICK if ARM_SINGLE_ARMV7M
+	help
+	  This enables support for Freescale i.MXRT Crossover processor.
+
 config SOC_VF610
 	bool "Vybrid Family VF610 support"
 	select ARM_GIC if ARCH_MULTI_V7
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index d5291ed9186a..6fb3965b9ae6 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -63,6 +63,8 @@ obj-$(CONFIG_SOC_IMX50) += mach-imx50.o
 obj-$(CONFIG_SOC_IMX51) += mach-imx51.o
 obj-$(CONFIG_SOC_IMX53) += mach-imx53.o
 
+obj-$(CONFIG_SOC_IMXRT) += mach-imxrt.o
+
 obj-$(CONFIG_SOC_VF610) += mach-vf610.o
 
 obj-$(CONFIG_SOC_LS1021A) += mach-ls1021a.o
diff --git a/arch/arm/mach-imx/mach-imxrt.c b/arch/arm/mach-imx/mach-imxrt.c
new file mode 100644
index 000000000000..2063a3059c84
--- /dev/null
+++ b/arch/arm/mach-imx/mach-imxrt.c
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019
+ * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com>
+ */
+
+#include <linux/kernel.h>
+#include <asm/mach/arch.h>
+#include <asm/v7m.h>
+
+static const char *const imxrt_compat[] __initconst = {
+	"fsl,imxrt1050",
+	NULL
+};
+
+DT_MACHINE_START(IMXRTDT, "IMXRT (Device Tree Support)")
+	.dt_compat = imxrt_compat,
+	.restart = armv7m_restart,
+MACHINE_END
diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig
index 63a0ca82659a..d61ea616cf8e 100644
--- a/arch/arm/mach-integrator/Kconfig
+++ b/arch/arm/mach-integrator/Kconfig
@@ -42,24 +42,12 @@ config INTEGRATOR_IMPD1
 	  allows ARM(R) Ltd PrimeCells to be developed and evaluated.
 	  The IM-PD1 can be found on the Integrator/PP2 platform.
 
-config INTEGRATOR_CM7TDMI
-	bool "Integrator/CM7TDMI core module"
-	depends on ARCH_INTEGRATOR_AP
-	depends on ARCH_MULTI_V4 && !MMU
-	select CPU_ARM7TDMI
-
 config INTEGRATOR_CM720T
 	bool "Integrator/CM720T core module"
 	depends on ARCH_INTEGRATOR_AP
 	depends on ARCH_MULTI_V4T
 	select CPU_ARM720T
 
-config INTEGRATOR_CM740T
-	bool "Integrator/CM740T core module"
-	depends on ARCH_INTEGRATOR_AP
-	depends on ARCH_MULTI_V4T && !MMU
-	select CPU_ARM740T
-
 config INTEGRATOR_CM920T
 	bool "Integrator/CM920T core module"
 	depends on ARCH_INTEGRATOR_AP
@@ -78,23 +66,6 @@ config INTEGRATOR_CM926EJS
 	depends on ARCH_MULTI_V5
 	select CPU_ARM926T
 
-config INTEGRATOR_CM940T
-	bool "Integrator/CM940T core module"
-	depends on ARCH_INTEGRATOR_AP
-	depends on ARCH_MULTI_V4T && !MMU
-	select CPU_ARM940T
-
-config INTEGRATOR_CM946ES
-	bool "Integrator/CM946E-S core module"
-	depends on ARCH_INTEGRATOR_AP
-	depends on ARCH_MULTI_V5 && !MMU
-	select CPU_ARM946E
-
-config INTEGRATOR_CM966ES
-	bool "Integrator/CM966E-S core module"
-	depends on ARCH_INTEGRATOR_AP
-	depends on BROKEN # no kernel support
-
 config INTEGRATOR_CM10200E_REV0
 	bool "Integrator/CM10200E rev.0 core module"
 	depends on ARCH_INTEGRATOR_AP && n
@@ -127,7 +98,7 @@ config INTEGRATOR_CM1136JFS
 
 config ARCH_INTEGRATOR_CP
 	bool "Support Integrator/CP platform"
-	depends on (!MMU || ARCH_MULTI_V5 || ARCH_MULTI_V6)
+	depends on ARCH_MULTI_V5 || ARCH_MULTI_V6
 	select ARM_TIMER_SP804
 	select SERIAL_AMBA_PL011 if TTY
 	select SERIAL_AMBA_PL011_CONSOLE if TTY
@@ -135,12 +106,6 @@ config ARCH_INTEGRATOR_CP
 	help
 	  Include support for the ARM(R) Integrator CP platform.
 
-config INTEGRATOR_CT7T
-	bool "Integrator/CT7TD (ARM7TDMI) core tile"
-	depends on ARCH_INTEGRATOR_CP
-	depends on ARCH_MULTI_V4T && !MMU
-	select CPU_ARM7TDMI
-
 config INTEGRATOR_CT926
 	bool "Integrator/CT926 (ARM926EJ-S) core tile"
 	depends on ARCH_INTEGRATOR_CP
diff --git a/arch/arm/mach-integrator/hardware.h b/arch/arm/mach-integrator/hardware.h
index 4d6ade3dd4ee..81ce09e3ad45 100644
--- a/arch/arm/mach-integrator/hardware.h
+++ b/arch/arm/mach-integrator/hardware.h
@@ -16,12 +16,7 @@
 #define IO_START		INTEGRATOR_HDR_BASE        // PA of IO
 
 /* macro to get at IO space when running virtually */
-#ifdef CONFIG_MMU
 #define IO_ADDRESS(x)	(((x) & 0x000fffff) | (((x) >> 4) & 0x0ff00000) | IO_BASE)
-#else
-#define IO_ADDRESS(x)	(x)
-#endif
-
 #define __io_address(n)		((void __iomem *)IO_ADDRESS(n))
 
 /*
diff --git a/arch/arm/mach-iop32x/cp6.c b/arch/arm/mach-iop32x/cp6.c
index ec74b07fb7e3..2882674a1c39 100644
--- a/arch/arm/mach-iop32x/cp6.c
+++ b/arch/arm/mach-iop32x/cp6.c
@@ -7,7 +7,7 @@
 #include <asm/traps.h>
 #include <asm/ptrace.h>
 
-static int cp6_trap(struct pt_regs *regs, unsigned int instr)
+void iop_enable_cp6(void)
 {
 	u32 temp;
 
@@ -16,7 +16,15 @@ static int cp6_trap(struct pt_regs *regs, unsigned int instr)
 		"mrc	p15, 0, %0, c15, c1, 0\n\t"
 		"orr	%0, %0, #(1 << 6)\n\t"
 		"mcr	p15, 0, %0, c15, c1, 0\n\t"
+		"mrc	p15, 0, %0, c15, c1, 0\n\t"
+		"mov	%0, %0\n\t"
+		"sub	pc, pc, #4  @ cp_wait\n\t"
 		: "=r"(temp));
+}
+
+static int cp6_trap(struct pt_regs *regs, unsigned int instr)
+{
+	iop_enable_cp6();
 
 	return 0;
 }
diff --git a/arch/arm/mach-iop32x/include/mach/entry-macro.S b/arch/arm/mach-iop32x/include/mach/entry-macro.S
deleted file mode 100644
index 8e6766d4621e..000000000000
--- a/arch/arm/mach-iop32x/include/mach/entry-macro.S
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * arch/arm/mach-iop32x/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for IOP32x-based platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-	.macro get_irqnr_preamble, base, tmp
-	mrc	p15, 0, \tmp, c15, c1, 0
-	orr	\tmp, \tmp, #(1 << 6)
-	mcr	p15, 0, \tmp, c15, c1, 0	@ Enable cp6 access
-	mrc	p15, 0, \tmp, c15, c1, 0
-	mov	\tmp, \tmp
-	sub	pc, pc, #4			@ cp_wait
-	.endm
-
-	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-	mrc     p6, 0, \irqstat, c8, c0, 0	@ Read IINTSRC
-	cmp     \irqstat, #0
-	clzne   \irqnr, \irqstat
-	rsbne   \irqnr, \irqnr, #31
-	.endm
-
-	.macro arch_ret_to_user, tmp1, tmp2
-	mrc	p15, 0, \tmp1, c15, c1, 0
-	ands	\tmp2, \tmp1, #(1 << 6)
-	bicne	\tmp1, \tmp1, #(1 << 6)
-	mcrne	p15, 0, \tmp1, c15, c1, 0	@ Disable cp6 access
-	.endm
diff --git a/arch/arm/mach-iop32x/include/mach/irqs.h b/arch/arm/mach-iop32x/include/mach/irqs.h
index c4e78df428e8..e09ae5f48aec 100644
--- a/arch/arm/mach-iop32x/include/mach/irqs.h
+++ b/arch/arm/mach-iop32x/include/mach/irqs.h
@@ -9,6 +9,6 @@
 #ifndef __IRQS_H
 #define __IRQS_H
 
-#define NR_IRQS			32
+#define NR_IRQS			33
 
 #endif
diff --git a/arch/arm/mach-iop32x/iop3xx.h b/arch/arm/mach-iop32x/iop3xx.h
index 46b4b34a4ad2..a6ec7ebadb35 100644
--- a/arch/arm/mach-iop32x/iop3xx.h
+++ b/arch/arm/mach-iop32x/iop3xx.h
@@ -225,6 +225,7 @@ extern int iop3xx_get_init_atu(void);
 #include <linux/reboot.h>
 
 void iop3xx_map_io(void);
+void iop_enable_cp6(void);
 void iop_init_cp6_handler(void);
 void iop_init_time(unsigned long tickrate);
 void iop3xx_restart(enum reboot_mode, const char *);
diff --git a/arch/arm/mach-iop32x/irq.c b/arch/arm/mach-iop32x/irq.c
index 2d48bf1398c1..6dca7e97d81f 100644
--- a/arch/arm/mach-iop32x/irq.c
+++ b/arch/arm/mach-iop32x/irq.c
@@ -29,17 +29,26 @@ static void intstr_write(u32 val)
 	asm volatile("mcr p6, 0, %0, c4, c0, 0" : : "r" (val));
 }
 
+static u32 iintsrc_read(void)
+{
+	int irq;
+
+	asm volatile("mrc p6, 0, %0, c8, c0, 0" : "=r" (irq));
+
+	return irq;
+}
+
 static void
 iop32x_irq_mask(struct irq_data *d)
 {
-	iop32x_mask &= ~(1 << d->irq);
+	iop32x_mask &= ~(1 << (d->irq - 1));
 	intctl_write(iop32x_mask);
 }
 
 static void
 iop32x_irq_unmask(struct irq_data *d)
 {
-	iop32x_mask |= 1 << d->irq;
+	iop32x_mask |= 1 << (d->irq - 1);
 	intctl_write(iop32x_mask);
 }
 
@@ -50,11 +59,25 @@ struct irq_chip ext_chip = {
 	.irq_unmask	= iop32x_irq_unmask,
 };
 
+static void iop_handle_irq(struct pt_regs *regs)
+{
+	u32 mask;
+
+	iop_enable_cp6();
+
+	do {
+		mask = iintsrc_read();
+		if (mask)
+			generic_handle_irq(fls(mask));
+	} while (mask);
+}
+
 void __init iop32x_init_irq(void)
 {
 	int i;
 
 	iop_init_cp6_handler();
+	set_handle_irq(iop_handle_irq);
 
 	intctl_write(0);
 	intstr_write(0);
@@ -65,7 +88,7 @@ void __init iop32x_init_irq(void)
 	    machine_is_em7210())
 		*IOP3XX_PCIIRSR = 0x0f;
 
-	for (i = 0; i < NR_IRQS; i++) {
+	for (i = 1; i < NR_IRQS; i++) {
 		irq_set_chip_and_handler(i, &ext_chip, handle_level_irq);
 		irq_clear_status_flags(i, IRQ_NOREQUEST | IRQ_NOPROBE);
 	}
diff --git a/arch/arm/mach-iop32x/irqs.h b/arch/arm/mach-iop32x/irqs.h
index 69858e4e905d..e1dfc8b4e7d7 100644
--- a/arch/arm/mach-iop32x/irqs.h
+++ b/arch/arm/mach-iop32x/irqs.h
@@ -7,36 +7,40 @@
 #ifndef __IOP32X_IRQS_H
 #define __IOP32X_IRQS_H
 
+/* Interrupts in Linux start at 1, hardware starts at 0 */
+
+#define IOP_IRQ(x) ((x) + 1)
+
 /*
  * IOP80321 chipset interrupts
  */
-#define IRQ_IOP32X_DMA0_EOT	0
-#define IRQ_IOP32X_DMA0_EOC	1
-#define IRQ_IOP32X_DMA1_EOT	2
-#define IRQ_IOP32X_DMA1_EOC	3
-#define IRQ_IOP32X_AA_EOT	6
-#define IRQ_IOP32X_AA_EOC	7
-#define IRQ_IOP32X_CORE_PMON	8
-#define IRQ_IOP32X_TIMER0	9
-#define IRQ_IOP32X_TIMER1	10
-#define IRQ_IOP32X_I2C_0	11
-#define IRQ_IOP32X_I2C_1	12
-#define IRQ_IOP32X_MESSAGING	13
-#define IRQ_IOP32X_ATU_BIST	14
-#define IRQ_IOP32X_PERFMON	15
-#define IRQ_IOP32X_CORE_PMU	16
-#define IRQ_IOP32X_BIU_ERR	17
-#define IRQ_IOP32X_ATU_ERR	18
-#define IRQ_IOP32X_MCU_ERR	19
-#define IRQ_IOP32X_DMA0_ERR	20
-#define IRQ_IOP32X_DMA1_ERR	21
-#define IRQ_IOP32X_AA_ERR	23
-#define IRQ_IOP32X_MSG_ERR	24
-#define IRQ_IOP32X_SSP		25
-#define IRQ_IOP32X_XINT0	27
-#define IRQ_IOP32X_XINT1	28
-#define IRQ_IOP32X_XINT2	29
-#define IRQ_IOP32X_XINT3	30
-#define IRQ_IOP32X_HPI		31
+#define IRQ_IOP32X_DMA0_EOT	IOP_IRQ(0)
+#define IRQ_IOP32X_DMA0_EOC	IOP_IRQ(1)
+#define IRQ_IOP32X_DMA1_EOT	IOP_IRQ(2)
+#define IRQ_IOP32X_DMA1_EOC	IOP_IRQ(3)
+#define IRQ_IOP32X_AA_EOT	IOP_IRQ(6)
+#define IRQ_IOP32X_AA_EOC	IOP_IRQ(7)
+#define IRQ_IOP32X_CORE_PMON	IOP_IRQ(8)
+#define IRQ_IOP32X_TIMER0	IOP_IRQ(9)
+#define IRQ_IOP32X_TIMER1	IOP_IRQ(10)
+#define IRQ_IOP32X_I2C_0	IOP_IRQ(11)
+#define IRQ_IOP32X_I2C_1	IOP_IRQ(12)
+#define IRQ_IOP32X_MESSAGING	IOP_IRQ(13)
+#define IRQ_IOP32X_ATU_BIST	IOP_IRQ(14)
+#define IRQ_IOP32X_PERFMON	IOP_IRQ(15)
+#define IRQ_IOP32X_CORE_PMU	IOP_IRQ(16)
+#define IRQ_IOP32X_BIU_ERR	IOP_IRQ(17)
+#define IRQ_IOP32X_ATU_ERR	IOP_IRQ(18)
+#define IRQ_IOP32X_MCU_ERR	IOP_IRQ(19)
+#define IRQ_IOP32X_DMA0_ERR	IOP_IRQ(20)
+#define IRQ_IOP32X_DMA1_ERR	IOP_IRQ(21)
+#define IRQ_IOP32X_AA_ERR	IOP_IRQ(23)
+#define IRQ_IOP32X_MSG_ERR	IOP_IRQ(24)
+#define IRQ_IOP32X_SSP		IOP_IRQ(25)
+#define IRQ_IOP32X_XINT0	IOP_IRQ(27)
+#define IRQ_IOP32X_XINT1	IOP_IRQ(28)
+#define IRQ_IOP32X_XINT2	IOP_IRQ(29)
+#define IRQ_IOP32X_XINT3	IOP_IRQ(30)
+#define IRQ_IOP32X_HPI		IOP_IRQ(31)
 
 #endif
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index 4c787b4be62b..f41ba3f42fc8 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -17,63 +17,6 @@ config MACH_IXP4XX_OF
 	help
 	  Say 'Y' here to support Device Tree-based IXP4xx platforms.
 
-config MACH_GATEWAY7001
-	bool "Gateway 7001"
-	depends on IXP4XX_PCI_LEGACY
-	help
-	  Say 'Y' here if you want your kernel to support Gateway's
-	  7001 Access Point. For more information on this platform,
-	  see http://openwrt.org
-
-config MACH_GORAMO_MLR
-	bool "GORAMO Multi Link Router"
-	depends on IXP4XX_PCI_LEGACY
-	help
-	  Say 'Y' here if you want your kernel to support GORAMO
-	  MultiLink router.
-
-config ARCH_PRPMC1100
-	bool "PrPMC1100"
-	help
-	  Say 'Y' here if you want your kernel to support the Motorola
-	  PrPCM1100 Processor Mezanine Module. For more information on
-	  this platform, see <file:Documentation/arm/ixp4xx.rst>.
-
-comment "IXP4xx Options"
-
-config IXP4XX_PCI_LEGACY
-	bool "IXP4xx legacy PCI driver support"
-	depends on PCI
-	help
-	  Selects legacy PCI driver.
-	  Not recommended for new development.
-
-config IXP4XX_INDIRECT_PCI
-	bool "Use indirect PCI memory access"
-	depends on IXP4XX_PCI_LEGACY
-	help
-          IXP4xx provides two methods of accessing PCI memory space:
-
-          1) A direct mapped window from 0x48000000 to 0x4BFFFFFF (64MB).
-             To access PCI via this space, we simply ioremap() the BAR
-             into the kernel and we can use the standard read[bwl]/write[bwl]
-             macros. This is the preferred method due to speed but it
-             limits the system to just 64MB of PCI memory. This can be
-             problematic if using video cards and other memory-heavy devices.
-
-	  2) If > 64MB of memory space is required, the IXP4xx can be
-	     configured to use indirect registers to access the whole PCI
-	     memory space. This currently allows for up to 1 GB (0x10000000
-	     to 0x4FFFFFFF) of memory on the bus. The disadvantage of this
-	     is that every PCI access requires three local register accesses
-	     plus a spinlock, but in some cases the performance hit is
-	     acceptable. In addition, you cannot mmap() PCI devices in this
-	     case due to the indirect nature of the PCI window.
-
-	  By default, the direct method is used. Choose this option if you
-	  need to use the indirect method instead. If you don't know
-	  what you need, leave this option unselected.
-
 endmenu
 
 endif
diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile
index b241094c9649..3d1c9d854c7f 100644
--- a/arch/arm/mach-ixp4xx/Makefile
+++ b/arch/arm/mach-ixp4xx/Makefile
@@ -1,19 +1,2 @@
 # SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the linux kernel.
-#
-
-obj-pci-y	:=
-obj-pci-n	:=
-
-# Device tree platform
-obj-pci-$(CONFIG_MACH_IXP4XX_OF)	+= ixp4xx-of.o
-
-obj-pci-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-pci.o
-
-obj-y	+= common.o
-
-obj-$(CONFIG_MACH_GATEWAY7001)	+= gateway7001-setup.o
-obj-$(CONFIG_MACH_GORAMO_MLR)	+= goramo_mlr.o
-
-obj-$(CONFIG_PCI)		+= $(obj-pci-$(CONFIG_PCI)) common-pci.o
+obj-y	+= ixp4xx-of.o
diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c
deleted file mode 100644
index 893c19c254e3..000000000000
--- a/arch/arm/mach-ixp4xx/common-pci.c
+++ /dev/null
@@ -1,451 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arm/mach-ixp4xx/common-pci.c 
- *
- * IXP4XX PCI routines for all platforms
- *
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002 Intel Corporation.
- * Copyright (C) 2003 Greg Ungerer <gerg@snapgear.com>
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/io.h>
-#include <linux/export.h>
-#include <asm/dma-mapping.h>
-
-#include <asm/cputype.h>
-#include <asm/irq.h>
-#include <linux/sizes.h>
-#include <asm/mach/pci.h>
-#include <mach/hardware.h>
-
-
-/*
- * IXP4xx PCI read function is dependent on whether we are 
- * running A0 or B0 (AppleGate) silicon.
- */
-int (*ixp4xx_pci_read)(u32 addr, u32 cmd, u32* data);
-
-/*
- * Base address for PCI register region
- */
-unsigned long ixp4xx_pci_reg_base = 0;
-
-/*
- * PCI cfg an I/O routines are done by programming a 
- * command/byte enable register, and then read/writing
- * the data from a data register. We need to ensure
- * these transactions are atomic or we will end up
- * with corrupt data on the bus or in a driver.
- */
-static DEFINE_RAW_SPINLOCK(ixp4xx_pci_lock);
-
-/*
- * Read from PCI config space
- */
-static void crp_read(u32 ad_cbe, u32 *data)
-{
-	unsigned long flags;
-	raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags);
-	*PCI_CRP_AD_CBE = ad_cbe;
-	*data = *PCI_CRP_RDATA;
-	raw_spin_unlock_irqrestore(&ixp4xx_pci_lock, flags);
-}
-
-/*
- * Write to PCI config space
- */
-static void crp_write(u32 ad_cbe, u32 data)
-{ 
-	unsigned long flags;
-	raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags);
-	*PCI_CRP_AD_CBE = CRP_AD_CBE_WRITE | ad_cbe;
-	*PCI_CRP_WDATA = data;
-	raw_spin_unlock_irqrestore(&ixp4xx_pci_lock, flags);
-}
-
-static inline int check_master_abort(void)
-{
-	/* check Master Abort bit after access */
-	unsigned long isr = *PCI_ISR;
-
-	if (isr & PCI_ISR_PFE) {
-		/* make sure the Master Abort bit is reset */    
-		*PCI_ISR = PCI_ISR_PFE;
-		pr_debug("%s failed\n", __func__);
-		return 1;
-	}
-
-	return 0;
-}
-
-int ixp4xx_pci_read_errata(u32 addr, u32 cmd, u32* data)
-{
-	unsigned long flags;
-	int retval = 0;
-	int i;
-
-	raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags);
-
-	*PCI_NP_AD = addr;
-
-	/* 
-	 * PCI workaround  - only works if NP PCI space reads have 
-	 * no side effects!!! Read 8 times. last one will be good.
-	 */
-	for (i = 0; i < 8; i++) {
-		*PCI_NP_CBE = cmd;
-		*data = *PCI_NP_RDATA;
-		*data = *PCI_NP_RDATA;
-	}
-
-	if(check_master_abort())
-		retval = 1;
-
-	raw_spin_unlock_irqrestore(&ixp4xx_pci_lock, flags);
-	return retval;
-}
-
-int ixp4xx_pci_read_no_errata(u32 addr, u32 cmd, u32* data)
-{
-	unsigned long flags;
-	int retval = 0;
-
-	raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags);
-
-	*PCI_NP_AD = addr;
-
-	/* set up and execute the read */    
-	*PCI_NP_CBE = cmd;
-
-	/* the result of the read is now in NP_RDATA */
-	*data = *PCI_NP_RDATA; 
-
-	if(check_master_abort())
-		retval = 1;
-
-	raw_spin_unlock_irqrestore(&ixp4xx_pci_lock, flags);
-	return retval;
-}
-
-int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data)
-{    
-	unsigned long flags;
-	int retval = 0;
-
-	raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags);
-
-	*PCI_NP_AD = addr;
-
-	/* set up the write */
-	*PCI_NP_CBE = cmd;
-
-	/* execute the write by writing to NP_WDATA */
-	*PCI_NP_WDATA = data;
-
-	if(check_master_abort())
-		retval = 1;
-
-	raw_spin_unlock_irqrestore(&ixp4xx_pci_lock, flags);
-	return retval;
-}
-
-static u32 ixp4xx_config_addr(u8 bus_num, u16 devfn, int where)
-{
-	u32 addr;
-	if (!bus_num) {
-		/* type 0 */
-		addr = BIT(32-PCI_SLOT(devfn)) | ((PCI_FUNC(devfn)) << 8) | 
-		    (where & ~3);	
-	} else {
-		/* type 1 */
-		addr = (bus_num << 16) | ((PCI_SLOT(devfn)) << 11) | 
-			((PCI_FUNC(devfn)) << 8) | (where & ~3) | 1;
-	}
-	return addr;
-}
-
-/*
- * Mask table, bits to mask for quantity of size 1, 2 or 4 bytes.
- * 0 and 3 are not valid indexes...
- */
-static u32 bytemask[] = {
-	/*0*/	0,
-	/*1*/	0xff,
-	/*2*/	0xffff,
-	/*3*/	0,
-	/*4*/	0xffffffff,
-};
-
-static u32 local_byte_lane_enable_bits(u32 n, int size)
-{
-	if (size == 1)
-		return (0xf & ~BIT(n)) << CRP_AD_CBE_BESL;
-	if (size == 2)
-		return (0xf & ~(BIT(n) | BIT(n+1))) << CRP_AD_CBE_BESL;
-	if (size == 4)
-		return 0;
-	return 0xffffffff;
-}
-
-static int local_read_config(int where, int size, u32 *value)
-{ 
-	u32 n, data;
-	pr_debug("local_read_config from %d size %d\n", where, size);
-	n = where % 4;
-	crp_read(where & ~3, &data);
-	*value = (data >> (8*n)) & bytemask[size];
-	pr_debug("local_read_config read %#x\n", *value);
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int local_write_config(int where, int size, u32 value)
-{
-	u32 n, byte_enables, data;
-	pr_debug("local_write_config %#x to %d size %d\n", value, where, size);
-	n = where % 4;
-	byte_enables = local_byte_lane_enable_bits(n, size);
-	if (byte_enables == 0xffffffff)
-		return PCIBIOS_BAD_REGISTER_NUMBER;
-	data = value << (8*n);
-	crp_write((where & ~3) | byte_enables, data);
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static u32 byte_lane_enable_bits(u32 n, int size)
-{
-	if (size == 1)
-		return (0xf & ~BIT(n)) << 4;
-	if (size == 2)
-		return (0xf & ~(BIT(n) | BIT(n+1))) << 4;
-	if (size == 4)
-		return 0;
-	return 0xffffffff;
-}
-
-static int ixp4xx_pci_read_config(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value)
-{
-	u32 n, byte_enables, addr, data;
-	u8 bus_num = bus->number;
-
-	pr_debug("read_config from %d size %d dev %d:%d:%d\n", where, size,
-		bus_num, PCI_SLOT(devfn), PCI_FUNC(devfn));
-
-	*value = 0xffffffff;
-	n = where % 4;
-	byte_enables = byte_lane_enable_bits(n, size);
-	if (byte_enables == 0xffffffff)
-		return PCIBIOS_BAD_REGISTER_NUMBER;
-
-	addr = ixp4xx_config_addr(bus_num, devfn, where);
-	if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_CONFIGREAD, &data))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	*value = (data >> (8*n)) & bytemask[size];
-	pr_debug("read_config_byte read %#x\n", *value);
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int ixp4xx_pci_write_config(struct pci_bus *bus,  unsigned int devfn, int where, int size, u32 value)
-{
-	u32 n, byte_enables, addr, data;
-	u8 bus_num = bus->number;
-
-	pr_debug("write_config_byte %#x to %d size %d dev %d:%d:%d\n", value, where,
-		size, bus_num, PCI_SLOT(devfn), PCI_FUNC(devfn));
-
-	n = where % 4;
-	byte_enables = byte_lane_enable_bits(n, size);
-	if (byte_enables == 0xffffffff)
-		return PCIBIOS_BAD_REGISTER_NUMBER;
-
-	addr = ixp4xx_config_addr(bus_num, devfn, where);
-	data = value << (8*n);
-	if (ixp4xx_pci_write(addr, byte_enables | NP_CMD_CONFIGWRITE, data))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops ixp4xx_ops = {
-	.read =  ixp4xx_pci_read_config,
-	.write = ixp4xx_pci_write_config,
-};
-
-/*
- * PCI abort handler
- */
-static int abort_handler(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
-{
-	u32 isr, status;
-
-	isr = *PCI_ISR;
-	local_read_config(PCI_STATUS, 2, &status);
-	pr_debug("PCI: abort_handler addr = %#lx, isr = %#x, "
-		"status = %#x\n", addr, isr, status);
-
-	/* make sure the Master Abort bit is reset */    
-	*PCI_ISR = PCI_ISR_PFE;
-	status |= PCI_STATUS_REC_MASTER_ABORT;
-	local_write_config(PCI_STATUS, 2, status);
-
-	/*
-	 * If it was an imprecise abort, then we need to correct the
-	 * return address to be _after_ the instruction.
-	 */
-	if (fsr & (1 << 10))
-		regs->ARM_pc += 4;
-
-	return 0;
-}
-
-void __init ixp4xx_pci_preinit(void)
-{
-	unsigned long cpuid = read_cpuid_id();
-
-#ifdef CONFIG_IXP4XX_INDIRECT_PCI
-	pcibios_min_mem = 0x10000000; /* 1 GB of indirect PCI MMIO space */
-#else
-	pcibios_min_mem = 0x48000000; /* 64 MB of PCI MMIO space */
-#endif
-	/*
-	 * Determine which PCI read method to use.
-	 * Rev 0 IXP425 requires workaround.
-	 */
-	if (!(cpuid & 0xf) && cpu_is_ixp42x()) {
-		printk("PCI: IXP42x A0 silicon detected - "
-			"PCI Non-Prefetch Workaround Enabled\n");
-		ixp4xx_pci_read = ixp4xx_pci_read_errata;
-	} else
-		ixp4xx_pci_read = ixp4xx_pci_read_no_errata;
-
-
-	/* hook in our fault handler for PCI errors */
-	hook_fault_code(16+6, abort_handler, SIGBUS, 0,
-			"imprecise external abort");
-
-	pr_debug("setup PCI-AHB(inbound) and AHB-PCI(outbound) address mappings\n");
-
-	/*
-	 * We use identity AHB->PCI address translation
-	 * in the 0x48000000 to 0x4bffffff address space
-	 */
-	*PCI_PCIMEMBASE = 0x48494A4B;
-
-	/*
-	 * We also use identity PCI->AHB address translation
-	 * in 4 16MB BARs that begin at the physical memory start
-	 */
-	*PCI_AHBMEMBASE = (PHYS_OFFSET & 0xFF000000) +
-		((PHYS_OFFSET & 0xFF000000) >> 8) +
-		((PHYS_OFFSET & 0xFF000000) >> 16) +
-		((PHYS_OFFSET & 0xFF000000) >> 24) +
-		0x00010203;
-
-	if (*PCI_CSR & PCI_CSR_HOST) {
-		printk("PCI: IXP4xx is host\n");
-
-		pr_debug("setup BARs in controller\n");
-
-		/*
-		 * We configure the PCI inbound memory windows to be
-		 * 1:1 mapped to SDRAM
-		 */
-		local_write_config(PCI_BASE_ADDRESS_0, 4, PHYS_OFFSET);
-		local_write_config(PCI_BASE_ADDRESS_1, 4, PHYS_OFFSET + SZ_16M);
-		local_write_config(PCI_BASE_ADDRESS_2, 4, PHYS_OFFSET + SZ_32M);
-		local_write_config(PCI_BASE_ADDRESS_3, 4,
-					PHYS_OFFSET + SZ_32M + SZ_16M);
-
-		/*
-		 * Enable CSR window at 64 MiB to allow PCI masters
-		 * to continue prefetching past 64 MiB boundary.
-		 */
-		local_write_config(PCI_BASE_ADDRESS_4, 4, PHYS_OFFSET + SZ_64M);
-
-		/*
-		 * Enable the IO window to be way up high, at 0xfffffc00
-		 */
-		local_write_config(PCI_BASE_ADDRESS_5, 4, 0xfffffc01);
-		local_write_config(0x40, 4, 0x000080FF); /* No TRDY time limit */
-	} else {
-		printk("PCI: IXP4xx is target - No bus scan performed\n");
-	}
-
-	printk("PCI: IXP4xx Using %s access for memory space\n",
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-			"direct"
-#else
-			"indirect"
-#endif
-		);
-
-	pr_debug("clear error bits in ISR\n");
-	*PCI_ISR = PCI_ISR_PSE | PCI_ISR_PFE | PCI_ISR_PPE | PCI_ISR_AHBE;
-
-	/*
-	 * Set Initialize Complete in PCI Control Register: allow IXP4XX to
-	 * respond to PCI configuration cycles. Specify that the AHB bus is
-	 * operating in big endian mode. Set up byte lane swapping between 
-	 * little-endian PCI and the big-endian AHB bus 
-	 */
-#ifdef __ARMEB__
-	*PCI_CSR = PCI_CSR_IC | PCI_CSR_ABE | PCI_CSR_PDS | PCI_CSR_ADS;
-#else
-	*PCI_CSR = PCI_CSR_IC | PCI_CSR_ABE;
-#endif
-
-	pr_debug("DONE\n");
-}
-
-int ixp4xx_setup(int nr, struct pci_sys_data *sys)
-{
-	struct resource *res;
-
-	if (nr >= 1)
-		return 0;
-
-	res = kcalloc(2, sizeof(*res), GFP_KERNEL);
-	if (res == NULL) {
-		/* 
-		 * If we're out of memory this early, something is wrong,
-		 * so we might as well catch it here.
-		 */
-		panic("PCI: unable to allocate resources?\n");
-	}
-
-	local_write_config(PCI_COMMAND, 2, PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
-
-	res[0].name = "PCI I/O Space";
-	res[0].start = 0x00000000;
-	res[0].end = 0x0000ffff;
-	res[0].flags = IORESOURCE_IO;
-
-	res[1].name = "PCI Memory Space";
-	res[1].start = PCIBIOS_MIN_MEM;
-	res[1].end = PCIBIOS_MAX_MEM;
-	res[1].flags = IORESOURCE_MEM;
-
-	request_resource(&ioport_resource, &res[0]);
-	request_resource(&iomem_resource, &res[1]);
-
-	pci_add_resource_offset(&sys->resources, &res[0], sys->io_offset);
-	pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset);
-
-	return 1;
-}
-
-EXPORT_SYMBOL(ixp4xx_pci_read);
-EXPORT_SYMBOL(ixp4xx_pci_write);
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
deleted file mode 100644
index cdc720f54daa..000000000000
--- a/arch/arm/mach-ixp4xx/common.c
+++ /dev/null
@@ -1,448 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/common.c
- *
- * Generic code shared across all IXP4XX platforms
- *
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2002 (c) Intel Corporation
- * Copyright 2003-2004 (c) MontaVista, Software, Inc. 
- * 
- * This file is licensed under  the terms of the GNU General Public 
- * License version 2. This program is licensed "as is" without any 
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/interrupt.h>
-#include <linux/bitops.h>
-#include <linux/io.h>
-#include <linux/export.h>
-#include <linux/cpu.h>
-#include <linux/pci.h>
-#include <linux/sched_clock.h>
-#include <linux/soc/ixp4xx/cpu.h>
-#include <linux/irqchip/irq-ixp4xx.h>
-#include <linux/platform_data/timer-ixp4xx.h>
-#include <linux/dma-map-ops.h>
-#include <mach/udc.h>
-#include <mach/hardware.h>
-#include <linux/uaccess.h>
-#include <asm/page.h>
-#include <asm/exception.h>
-#include <asm/irq.h>
-#include <asm/system_misc.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-
-#include "irqs.h"
-
-u32 ixp4xx_read_feature_bits(void)
-{
-	u32 val = ~__raw_readl(IXP4XX_EXP_CFG2);
-
-	if (cpu_is_ixp42x_rev_a0())
-		return IXP42X_FEATURE_MASK & ~(IXP4XX_FEATURE_RCOMP |
-					       IXP4XX_FEATURE_AES);
-	if (cpu_is_ixp42x())
-		return val & IXP42X_FEATURE_MASK;
-	if (cpu_is_ixp43x())
-		return val & IXP43X_FEATURE_MASK;
-	return val & IXP46X_FEATURE_MASK;
-}
-EXPORT_SYMBOL(ixp4xx_read_feature_bits);
-
-void ixp4xx_write_feature_bits(u32 value)
-{
-	__raw_writel(~value, IXP4XX_EXP_CFG2);
-}
-EXPORT_SYMBOL(ixp4xx_write_feature_bits);
-
-#define IXP4XX_TIMER_FREQ 66666000
-
-/*************************************************************************
- * IXP4xx chipset I/O mapping
- *************************************************************************/
-static struct map_desc ixp4xx_io_desc[] __initdata = {
-	{	/* UART, Interrupt ctrl, GPIO, timers, NPEs, MACs, USB .... */
-		.virtual	= (unsigned long)IXP4XX_PERIPHERAL_BASE_VIRT,
-		.pfn		= __phys_to_pfn(IXP4XX_PERIPHERAL_BASE_PHYS),
-		.length		= IXP4XX_PERIPHERAL_REGION_SIZE,
-		.type		= MT_DEVICE
-	}, {	/* Expansion Bus Config Registers */
-		.virtual	= (unsigned long)IXP4XX_EXP_CFG_BASE_VIRT,
-		.pfn		= __phys_to_pfn(IXP4XX_EXP_CFG_BASE_PHYS),
-		.length		= IXP4XX_EXP_CFG_REGION_SIZE,
-		.type		= MT_DEVICE
-	}, {	/* PCI Registers */
-		.virtual	= (unsigned long)IXP4XX_PCI_CFG_BASE_VIRT,
-		.pfn		= __phys_to_pfn(IXP4XX_PCI_CFG_BASE_PHYS),
-		.length		= IXP4XX_PCI_CFG_REGION_SIZE,
-		.type		= MT_DEVICE
-	},
-};
-
-void __init ixp4xx_map_io(void)
-{
-  	iotable_init(ixp4xx_io_desc, ARRAY_SIZE(ixp4xx_io_desc));
-}
-
-void __init ixp4xx_init_irq(void)
-{
-	/*
-	 * ixp4xx does not implement the XScale PWRMODE register
-	 * so it must not call cpu_do_idle().
-	 */
-	cpu_idle_poll_ctrl(true);
-
-	ixp4xx_irq_init(IXP4XX_INTC_BASE_PHYS,
-			(cpu_is_ixp46x() || cpu_is_ixp43x()));
-}
-
-void __init ixp4xx_timer_init(void)
-{
-	return ixp4xx_timer_setup(IXP4XX_TIMER_BASE_PHYS,
-				  IRQ_IXP4XX_TIMER1,
-				  IXP4XX_TIMER_FREQ);
-}
-
-static struct pxa2xx_udc_mach_info ixp4xx_udc_info;
-
-void __init ixp4xx_set_udc_info(struct pxa2xx_udc_mach_info *info)
-{
-	memcpy(&ixp4xx_udc_info, info, sizeof *info);
-}
-
-static struct resource ixp4xx_udc_resources[] = {
-	[0] = {
-		.start  = 0xc800b000,
-		.end    = 0xc800bfff,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = IRQ_IXP4XX_USB,
-		.end    = IRQ_IXP4XX_USB,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct resource ixp4xx_gpio_resource[] = {
-	{
-		.start = IXP4XX_GPIO_BASE_PHYS,
-		.end = IXP4XX_GPIO_BASE_PHYS + 0xfff,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device ixp4xx_gpio_device = {
-	.name           = "ixp4xx-gpio",
-	.id             = -1,
-	.dev = {
-		.coherent_dma_mask      = DMA_BIT_MASK(32),
-	},
-	.resource = ixp4xx_gpio_resource,
-	.num_resources  = ARRAY_SIZE(ixp4xx_gpio_resource),
-};
-
-/*
- * USB device controller. The IXP4xx uses the same controller as PXA25X,
- * so we just use the same device.
- */
-static struct platform_device ixp4xx_udc_device = {
-	.name           = "pxa25x-udc",
-	.id             = -1,
-	.num_resources  = 2,
-	.resource       = ixp4xx_udc_resources,
-	.dev            = {
-		.platform_data = &ixp4xx_udc_info,
-	},
-};
-
-static struct resource ixp4xx_npe_resources[] = {
-	{
-		.start = IXP4XX_NPEA_BASE_PHYS,
-		.end = IXP4XX_NPEA_BASE_PHYS + 0xfff,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IXP4XX_NPEB_BASE_PHYS,
-		.end = IXP4XX_NPEB_BASE_PHYS + 0xfff,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IXP4XX_NPEC_BASE_PHYS,
-		.end = IXP4XX_NPEC_BASE_PHYS + 0xfff,
-		.flags = IORESOURCE_MEM,
-	},
-
-};
-
-static struct platform_device ixp4xx_npe_device = {
-	.name           = "ixp4xx-npe",
-	.id             = -1,
-	.num_resources  = ARRAY_SIZE(ixp4xx_npe_resources),
-	.resource       = ixp4xx_npe_resources,
-};
-
-static struct resource ixp4xx_qmgr_resources[] = {
-	{
-		.start = IXP4XX_QMGR_BASE_PHYS,
-		.end = IXP4XX_QMGR_BASE_PHYS + 0x3fff,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_IXP4XX_QM1,
-		.end = IRQ_IXP4XX_QM1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_IXP4XX_QM2,
-		.end = IRQ_IXP4XX_QM2,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device ixp4xx_qmgr_device = {
-	.name           = "ixp4xx-qmgr",
-	.id             = -1,
-	.num_resources  = ARRAY_SIZE(ixp4xx_qmgr_resources),
-	.resource       = ixp4xx_qmgr_resources,
-};
-
-static struct platform_device *ixp4xx_devices[] __initdata = {
-	&ixp4xx_npe_device,
-	&ixp4xx_qmgr_device,
-	&ixp4xx_gpio_device,
-	&ixp4xx_udc_device,
-};
-
-static struct resource ixp46x_i2c_resources[] = {
-	[0] = {
-		.start 	= 0xc8011000,
-		.end	= 0xc801101c,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start 	= IRQ_IXP4XX_I2C,
-		.end	= IRQ_IXP4XX_I2C,
-		.flags	= IORESOURCE_IRQ
-	}
-};
-
-/* A single 32-bit register on IXP46x */
-#define IXP4XX_HWRANDOM_BASE_PHYS	0x70002100
-
-static struct resource ixp46x_hwrandom_resource[] = {
-	{
-		.start = IXP4XX_HWRANDOM_BASE_PHYS,
-		.end = IXP4XX_HWRANDOM_BASE_PHYS + 0x3,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device ixp46x_hwrandom_device = {
-	.name           = "ixp4xx-hwrandom",
-	.id             = -1,
-	.dev = {
-		.coherent_dma_mask      = DMA_BIT_MASK(32),
-	},
-	.resource = ixp46x_hwrandom_resource,
-	.num_resources  = ARRAY_SIZE(ixp46x_hwrandom_resource),
-};
-
-/*
- * I2C controller. The IXP46x uses the same block as the IOP3xx, so
- * we just use the same device name.
- */
-static struct platform_device ixp46x_i2c_controller = {
-	.name		= "IOP3xx-I2C",
-	.id		= 0,
-	.num_resources	= 2,
-	.resource	= ixp46x_i2c_resources
-};
-
-static struct resource ixp46x_ptp_resources[] = {
-	DEFINE_RES_MEM(IXP4XX_TIMESYNC_BASE_PHYS, SZ_4K),
-	DEFINE_RES_IRQ_NAMED(IRQ_IXP4XX_GPIO8, "master"),
-	DEFINE_RES_IRQ_NAMED(IRQ_IXP4XX_GPIO7, "slave"),
-};
-
-static struct platform_device ixp46x_ptp = {
-	.name		= "ptp-ixp46x",
-	.id		= -1,
-	.resource	= ixp46x_ptp_resources,
-	.num_resources	= ARRAY_SIZE(ixp46x_ptp_resources),
-};
-
-static struct platform_device *ixp46x_devices[] __initdata = {
-	&ixp46x_hwrandom_device,
-	&ixp46x_i2c_controller,
-	&ixp46x_ptp,
-};
-
-unsigned long ixp4xx_exp_bus_size;
-EXPORT_SYMBOL(ixp4xx_exp_bus_size);
-
-static struct platform_device_info ixp_dev_info __initdata = {
-	.name		= "ixp4xx_crypto",
-	.id		= 0,
-	.dma_mask	= DMA_BIT_MASK(32),
-};
-
-static int __init ixp_crypto_register(void)
-{
-	struct platform_device *pdev;
-
-	if (!(~(*IXP4XX_EXP_CFG2) & (IXP4XX_FEATURE_HASH |
-				IXP4XX_FEATURE_AES | IXP4XX_FEATURE_DES))) {
-		printk(KERN_ERR "ixp_crypto: No HW crypto available\n");
-		return -ENODEV;
-	}
-
-	pdev = platform_device_register_full(&ixp_dev_info);
-	if (IS_ERR(pdev))
-		return PTR_ERR(pdev);
-
-	return 0;
-}
-
-void __init ixp4xx_sys_init(void)
-{
-	ixp4xx_exp_bus_size = SZ_16M;
-
-	platform_add_devices(ixp4xx_devices, ARRAY_SIZE(ixp4xx_devices));
-
-	if (IS_ENABLED(CONFIG_CRYPTO_DEV_IXP4XX))
-		ixp_crypto_register();
-
-	if (cpu_is_ixp46x()) {
-		int region;
-
-		platform_add_devices(ixp46x_devices,
-				ARRAY_SIZE(ixp46x_devices));
-
-		for (region = 0; region < 7; region++) {
-			if((*(IXP4XX_EXP_REG(0x4 * region)) & 0x200)) {
-				ixp4xx_exp_bus_size = SZ_32M;
-				break;
-			}
-		}
-	}
-
-	printk("IXP4xx: Using %luMiB expansion bus window size\n",
-			ixp4xx_exp_bus_size >> 20);
-}
-
-unsigned long ixp4xx_timer_freq = IXP4XX_TIMER_FREQ;
-EXPORT_SYMBOL(ixp4xx_timer_freq);
-
-void ixp4xx_restart(enum reboot_mode mode, const char *cmd)
-{
-	if (mode == REBOOT_SOFT) {
-		/* Jump into ROM at address 0 */
-		soft_restart(0);
-	} else {
-		/* Use on-chip reset capability */
-
-		/* set the "key" register to enable access to
-		 * "timer" and "enable" registers
-		 */
-		*IXP4XX_OSWK = IXP4XX_WDT_KEY;
-
-		/* write 0 to the timer register for an immediate reset */
-		*IXP4XX_OSWT = 0;
-
-		*IXP4XX_OSWE = IXP4XX_WDT_RESET_ENABLE | IXP4XX_WDT_COUNT_ENABLE;
-	}
-}
-
-#ifdef CONFIG_PCI
-static int ixp4xx_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
-{
-	return (dma_addr + size) > SZ_64M;
-}
-
-static int ixp4xx_platform_notify_remove(struct device *dev)
-{
-	if (dev_is_pci(dev))
-		dmabounce_unregister_dev(dev);
-
-	return 0;
-}
-#endif
-
-/*
- * Setup DMA mask to 64MB on PCI devices and 4 GB on all other things.
- */
-static int ixp4xx_platform_notify(struct device *dev)
-{
-	dev->dma_mask = &dev->coherent_dma_mask;
-
-#ifdef CONFIG_PCI
-	if (dev_is_pci(dev)) {
-		dev->coherent_dma_mask = DMA_BIT_MASK(28); /* 64 MB */
-		dmabounce_register_dev(dev, 2048, 4096, ixp4xx_needs_bounce);
-		return 0;
-	}
-#endif
-
-	dev->coherent_dma_mask = DMA_BIT_MASK(32);
-	return 0;
-}
-
-int dma_set_coherent_mask(struct device *dev, u64 mask)
-{
-	if (dev_is_pci(dev))
-		mask &= DMA_BIT_MASK(28); /* 64 MB */
-
-	if ((mask & DMA_BIT_MASK(28)) == DMA_BIT_MASK(28)) {
-		dev->coherent_dma_mask = mask;
-		return 0;
-	}
-
-	return -EIO;		/* device wanted sub-64MB mask */
-}
-EXPORT_SYMBOL(dma_set_coherent_mask);
-
-#ifdef CONFIG_IXP4XX_INDIRECT_PCI
-/*
- * In the case of using indirect PCI, we simply return the actual PCI
- * address and our read/write implementation use that to drive the
- * access registers. If something outside of PCI is ioremap'd, we
- * fallback to the default.
- */
-
-static void __iomem *ixp4xx_ioremap_caller(phys_addr_t addr, size_t size,
-					   unsigned int mtype, void *caller)
-{
-	if (!is_pci_memory(addr))
-		return __arm_ioremap_caller(addr, size, mtype, caller);
-
-	return (void __iomem *)addr;
-}
-
-static void ixp4xx_iounmap(volatile void __iomem *addr)
-{
-	if (!is_pci_memory((__force u32)addr))
-		__iounmap(addr);
-}
-#endif
-
-void __init ixp4xx_init_early(void)
-{
-	platform_notify = ixp4xx_platform_notify;
-#ifdef CONFIG_PCI
-	platform_notify_remove = ixp4xx_platform_notify_remove;
-#endif
-#ifdef CONFIG_IXP4XX_INDIRECT_PCI
-	arch_ioremap_caller = ixp4xx_ioremap_caller;
-	arch_iounmap = ixp4xx_iounmap;
-#endif
-}
diff --git a/arch/arm/mach-ixp4xx/gateway7001-pci.c b/arch/arm/mach-ixp4xx/gateway7001-pci.c
deleted file mode 100644
index 3c3ee9dad6d8..000000000000
--- a/arch/arm/mach-ixp4xx/gateway7001-pci.c
+++ /dev/null
@@ -1,61 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * arch/arch/mach-ixp4xx/gateway7001-pci.c
- *
- * PCI setup routines for Gateway 7001
- *
- * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
- *
- * based on coyote-pci.c:
- *	Copyright (C) 2002 Jungo Software Technologies.
- *	Copyright (C) 2003 MontaVista Softwrae, Inc.
- *
- * Maintainer: Imre Kaloz <kaloz@openwrt.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-
-#include <asm/mach/pci.h>
-
-#include "irqs.h"
-
-void __init gateway7001_pci_preinit(void)
-{
-	irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW);
-
-	ixp4xx_pci_preinit();
-}
-
-static int __init gateway7001_map_irq(const struct pci_dev *dev, u8 slot,
-	u8 pin)
-{
-	if (slot == 1)
-		return IRQ_IXP4XX_GPIO11;
-	else if (slot == 2)
-		return IRQ_IXP4XX_GPIO10;
-	else return -1;
-}
-
-struct hw_pci gateway7001_pci __initdata = {
-	.nr_controllers = 1,
-	.ops		= &ixp4xx_ops,
-	.preinit =        gateway7001_pci_preinit,
-	.setup =          ixp4xx_setup,
-	.map_irq =        gateway7001_map_irq,
-};
-
-int __init gateway7001_pci_init(void)
-{
-	if (machine_is_gateway7001())
-		pci_common_init(&gateway7001_pci);
-	return 0;
-}
-
-subsys_initcall(gateway7001_pci_init);
diff --git a/arch/arm/mach-ixp4xx/gateway7001-setup.c b/arch/arm/mach-ixp4xx/gateway7001-setup.c
deleted file mode 100644
index 678e7dfff0e5..000000000000
--- a/arch/arm/mach-ixp4xx/gateway7001-setup.c
+++ /dev/null
@@ -1,113 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/arm/mach-ixp4xx/gateway7001-setup.c
- *
- * Board setup for the Gateway 7001 board
- *
- * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
- *
- * based on coyote-setup.c:
- *      Copyright (C) 2003-2005 MontaVista Software, Inc.
- *
- * Author: Imre Kaloz <Kaloz@openwrt.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_8250.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-
-#include "irqs.h"
-
-static struct flash_platform_data gateway7001_flash_data = {
-	.map_name	= "cfi_probe",
-	.width		= 2,
-};
-
-static struct resource gateway7001_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device gateway7001_flash = {
-	.name		= "IXP4XX-Flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &gateway7001_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &gateway7001_flash_resource,
-};
-
-static struct resource gateway7001_uart_resource = {
-	.start	= IXP4XX_UART2_BASE_PHYS,
-	.end	= IXP4XX_UART2_BASE_PHYS + 0x0fff,
-	.flags	= IORESOURCE_MEM,
-};
-
-static struct plat_serial8250_port gateway7001_uart_data[] = {
-	{
-		.mapbase	= IXP4XX_UART2_BASE_PHYS,
-		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	},
-	{ },
-};
-
-static struct platform_device gateway7001_uart = {
-	.name		= "serial8250",
-	.id		= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= gateway7001_uart_data,
-	},
-	.num_resources	= 1,
-	.resource	= &gateway7001_uart_resource,
-};
-
-static struct platform_device *gateway7001_devices[] __initdata = {
-	&gateway7001_flash,
-	&gateway7001_uart
-};
-
-static void __init gateway7001_init(void)
-{
-	ixp4xx_sys_init();
-
-	gateway7001_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-	gateway7001_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-
-	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-
-	platform_add_devices(gateway7001_devices, ARRAY_SIZE(gateway7001_devices));
-}
-
-#ifdef CONFIG_MACH_GATEWAY7001
-MACHINE_START(GATEWAY7001, "Gateway 7001 AP")
-	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-	.map_io		= ixp4xx_map_io,
-	.init_early	= ixp4xx_init_early,
-	.init_irq	= ixp4xx_init_irq,
-	.init_time	= ixp4xx_timer_init,
-	.atag_offset	= 0x100,
-	.init_machine	= gateway7001_init,
-#if defined(CONFIG_PCI)
-	.dma_zone_size	= SZ_64M,
-#endif
-	.restart	= ixp4xx_restart,
-MACHINE_END
-#endif
diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c
deleted file mode 100644
index 07b50dfcc489..000000000000
--- a/arch/arm/mach-ixp4xx/goramo_mlr.c
+++ /dev/null
@@ -1,532 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Goramo MultiLink router platform code
- * Copyright (C) 2006-2009 Krzysztof Halasa <khc@pm.waw.pl>
- */
-
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/hdlc.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/platform_data/wan_ixp4xx_hss.h>
-#include <linux/serial_8250.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/pci.h>
-#include <asm/system_info.h>
-
-#include "irqs.h"
-
-#define SLOT_ETHA		0x0B	/* IDSEL = AD21 */
-#define SLOT_ETHB		0x0C	/* IDSEL = AD20 */
-#define SLOT_MPCI		0x0D	/* IDSEL = AD19 */
-#define SLOT_NEC		0x0E	/* IDSEL = AD18 */
-
-/* GPIO lines */
-#define GPIO_SCL		0
-#define GPIO_SDA		1
-#define GPIO_STR		2
-#define GPIO_IRQ_NEC		3
-#define GPIO_IRQ_ETHA		4
-#define GPIO_IRQ_ETHB		5
-#define GPIO_HSS0_DCD_N		6
-#define GPIO_HSS1_DCD_N		7
-#define GPIO_UART0_DCD		8
-#define GPIO_UART1_DCD		9
-#define GPIO_HSS0_CTS_N		10
-#define GPIO_HSS1_CTS_N		11
-#define GPIO_IRQ_MPCI		12
-#define GPIO_HSS1_RTS_N		13
-#define GPIO_HSS0_RTS_N		14
-/* GPIO15 is not connected */
-
-/* Control outputs from 74HC4094 */
-#define CONTROL_HSS0_CLK_INT	0
-#define CONTROL_HSS1_CLK_INT	1
-#define CONTROL_HSS0_DTR_N	2
-#define CONTROL_HSS1_DTR_N	3
-#define CONTROL_EXT		4
-#define CONTROL_AUTO_RESET	5
-#define CONTROL_PCI_RESET_N	6
-#define CONTROL_EEPROM_WC_N	7
-
-/* offsets from start of flash ROM = 0x50000000 */
-#define CFG_ETH0_ADDRESS	0x40 /* 6 bytes */
-#define CFG_ETH1_ADDRESS	0x46 /* 6 bytes */
-#define CFG_REV			0x4C /* u32 */
-#define CFG_SDRAM_SIZE		0x50 /* u32 */
-#define CFG_SDRAM_CONF		0x54 /* u32 */
-#define CFG_SDRAM_MODE		0x58 /* u32 */
-#define CFG_SDRAM_REFRESH	0x5C /* u32 */
-
-#define CFG_HW_BITS		0x60 /* u32 */
-#define  CFG_HW_USB_PORTS	0x00000007 /* 0 = no NEC chip, 1-5 = ports # */
-#define  CFG_HW_HAS_PCI_SLOT	0x00000008
-#define  CFG_HW_HAS_ETH0	0x00000010
-#define  CFG_HW_HAS_ETH1	0x00000020
-#define  CFG_HW_HAS_HSS0	0x00000040
-#define  CFG_HW_HAS_HSS1	0x00000080
-#define  CFG_HW_HAS_UART0	0x00000100
-#define  CFG_HW_HAS_UART1	0x00000200
-#define  CFG_HW_HAS_EEPROM	0x00000400
-
-#define FLASH_CMD_READ_ARRAY	0xFF
-#define FLASH_CMD_READ_ID	0x90
-#define FLASH_SER_OFF		0x102 /* 0x81 in 16-bit mode */
-
-static u32 hw_bits = 0xFFFFFFFD;    /* assume all hardware present */;
-static u8 control_value;
-
-/*
- * FIXME: this is reimplementing I2C bit-bangining. Move this
- * over to using driver/i2c/busses/i2c-gpio.c like all other boards
- * and register proper I2C device(s) on the bus for this. (See
- * other IXP4xx boards for examples.)
- */
-static void set_scl(u8 value)
-{
-	gpio_set_value(GPIO_SCL, !!value);
-	udelay(3);
-}
-
-static void set_sda(u8 value)
-{
-	gpio_set_value(GPIO_SDA, !!value);
-	udelay(3);
-}
-
-static void set_str(u8 value)
-{
-	gpio_set_value(GPIO_STR, !!value);
-	udelay(3);
-}
-
-static inline void set_control(int line, int value)
-{
-	if (value)
-		control_value |=  (1 << line);
-	else
-		control_value &= ~(1 << line);
-}
-
-
-static void output_control(void)
-{
-	int i;
-
-	gpio_direction_output(GPIO_SCL, 1);
-	gpio_direction_output(GPIO_SDA, 1);
-
-	for (i = 0; i < 8; i++) {
-		set_scl(0);
-		set_sda(control_value & (0x80 >> i)); /* MSB first */
-		set_scl(1);	/* active edge */
-	}
-
-	set_str(1);
-	set_str(0);
-
-	set_scl(0);
-	set_sda(1);		/* Be ready for START */
-	set_scl(1);
-}
-
-
-static void (*set_carrier_cb_tab[2])(void *pdev, int carrier);
-
-static int hss_set_clock(int port, unsigned int clock_type)
-{
-	int ctrl_int = port ? CONTROL_HSS1_CLK_INT : CONTROL_HSS0_CLK_INT;
-
-	switch (clock_type) {
-	case CLOCK_DEFAULT:
-	case CLOCK_EXT:
-		set_control(ctrl_int, 0);
-		output_control();
-		return CLOCK_EXT;
-
-	case CLOCK_INT:
-		set_control(ctrl_int, 1);
-		output_control();
-		return CLOCK_INT;
-
-	default:
-		return -EINVAL;
-	}
-}
-
-static irqreturn_t hss_dcd_irq(int irq, void *pdev)
-{
-	int port = (irq == IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N));
-	int i = gpio_get_value(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N);
-	set_carrier_cb_tab[port](pdev, !i);
-	return IRQ_HANDLED;
-}
-
-
-static int hss_open(int port, void *pdev,
-		    void (*set_carrier_cb)(void *pdev, int carrier))
-{
-	int i, irq;
-
-	if (!port)
-		irq = IXP4XX_GPIO_IRQ(GPIO_HSS0_DCD_N);
-	else
-		irq = IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N);
-
-	i = gpio_get_value(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N);
-	set_carrier_cb(pdev, !i);
-
-	set_carrier_cb_tab[!!port] = set_carrier_cb;
-
-	if ((i = request_irq(irq, hss_dcd_irq, 0, "IXP4xx HSS", pdev)) != 0) {
-		printk(KERN_ERR "ixp4xx_hss: failed to request IRQ%i (%i)\n",
-		       irq, i);
-		return i;
-	}
-
-	set_control(port ? CONTROL_HSS1_DTR_N : CONTROL_HSS0_DTR_N, 0);
-	output_control();
-	gpio_set_value(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 0);
-	return 0;
-}
-
-static void hss_close(int port, void *pdev)
-{
-	free_irq(port ? IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N) :
-		 IXP4XX_GPIO_IRQ(GPIO_HSS0_DCD_N), pdev);
-	set_carrier_cb_tab[!!port] = NULL; /* catch bugs */
-
-	set_control(port ? CONTROL_HSS1_DTR_N : CONTROL_HSS0_DTR_N, 1);
-	output_control();
-	gpio_set_value(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 1);
-}
-
-
-/* Flash memory */
-static struct flash_platform_data flash_data = {
-	.map_name	= "cfi_probe",
-	.width		= 2,
-};
-
-static struct resource flash_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device device_flash = {
-	.name		= "IXP4XX-Flash",
-	.id		= 0,
-	.dev		= { .platform_data = &flash_data },
-	.num_resources	= 1,
-	.resource	= &flash_resource,
-};
-
-/* IXP425 2 UART ports */
-static struct resource uart_resources[] = {
-	{
-		.start		= IXP4XX_UART1_BASE_PHYS,
-		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= IXP4XX_UART2_BASE_PHYS,
-		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM,
-	}
-};
-
-static struct plat_serial8250_port uart_data[] = {
-	{
-		.mapbase	= IXP4XX_UART1_BASE_PHYS,
-		.membase	= (char __iomem *)IXP4XX_UART1_BASE_VIRT +
-			REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART1,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	},
-	{
-		.mapbase	= IXP4XX_UART2_BASE_PHYS,
-		.membase	= (char __iomem *)IXP4XX_UART2_BASE_VIRT +
-			REG_OFFSET,
-		.irq		= IRQ_IXP4XX_UART2,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= IXP4XX_UART_XTAL,
-	},
-	{ },
-};
-
-static struct platform_device device_uarts = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev.platform_data	= uart_data,
-	.num_resources		= 2,
-	.resource		= uart_resources,
-};
-
-
-/* Built-in 10/100 Ethernet MAC interfaces */
-static struct resource eth_npeb_resources[] = {
-	{
-		.start		= IXP4XX_EthB_BASE_PHYS,
-		.end		= IXP4XX_EthB_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct resource eth_npec_resources[] = {
-	{
-		.start		= IXP4XX_EthC_BASE_PHYS,
-		.end		= IXP4XX_EthC_BASE_PHYS + 0x0fff,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct eth_plat_info eth_plat[] = {
-	{
-		.phy		= 0,
-		.rxq		= 3,
-		.txreadyq	= 32,
-	}, {
-		.phy		= 1,
-		.rxq		= 4,
-		.txreadyq	= 33,
-	}
-};
-
-static struct platform_device device_eth_tab[] = {
-	{
-		.name			= "ixp4xx_eth",
-		.id			= IXP4XX_ETH_NPEB,
-		.dev.platform_data	= eth_plat,
-		.num_resources		= ARRAY_SIZE(eth_npeb_resources),
-		.resource		= eth_npeb_resources,
-	}, {
-		.name			= "ixp4xx_eth",
-		.id			= IXP4XX_ETH_NPEC,
-		.dev.platform_data	= eth_plat + 1,
-		.num_resources		= ARRAY_SIZE(eth_npec_resources),
-		.resource		= eth_npec_resources,
-	}
-};
-
-
-/* IXP425 2 synchronous serial ports */
-static struct hss_plat_info hss_plat[] = {
-	{
-		.set_clock	= hss_set_clock,
-		.open		= hss_open,
-		.close		= hss_close,
-		.txreadyq	= 34,
-	}, {
-		.set_clock	= hss_set_clock,
-		.open		= hss_open,
-		.close		= hss_close,
-		.txreadyq	= 35,
-	}
-};
-
-static struct platform_device device_hss_tab[] = {
-	{
-		.name			= "ixp4xx_hss",
-		.id			= 0,
-		.dev.platform_data	= hss_plat,
-	}, {
-		.name			= "ixp4xx_hss",
-		.id			= 1,
-		.dev.platform_data	= hss_plat + 1,
-	}
-};
-
-
-static struct platform_device *device_tab[7] __initdata = {
-	&device_flash,		/* index 0 */
-};
-
-static inline u8 __init flash_readb(u8 __iomem *flash, u32 addr)
-{
-#ifdef __ARMEB__
-	return __raw_readb(flash + addr);
-#else
-	return __raw_readb(flash + (addr ^ 3));
-#endif
-}
-
-static inline u16 __init flash_readw(u8 __iomem *flash, u32 addr)
-{
-#ifdef __ARMEB__
-	return __raw_readw(flash + addr);
-#else
-	return __raw_readw(flash + (addr ^ 2));
-#endif
-}
-
-static void __init gmlr_init(void)
-{
-	u8 __iomem *flash;
-	int i, devices = 1; /* flash */
-
-	ixp4xx_sys_init();
-
-	if ((flash = ioremap(IXP4XX_EXP_BUS_BASE_PHYS, 0x80)) == NULL)
-		printk(KERN_ERR "goramo-mlr: unable to access system"
-		       " configuration data\n");
-	else {
-		system_rev = __raw_readl(flash + CFG_REV);
-		hw_bits = __raw_readl(flash + CFG_HW_BITS);
-
-		for (i = 0; i < ETH_ALEN; i++) {
-			eth_plat[0].hwaddr[i] =
-				flash_readb(flash, CFG_ETH0_ADDRESS + i);
-			eth_plat[1].hwaddr[i] =
-				flash_readb(flash, CFG_ETH1_ADDRESS + i);
-		}
-
-		__raw_writew(FLASH_CMD_READ_ID, flash);
-		system_serial_high = flash_readw(flash, FLASH_SER_OFF);
-		system_serial_high <<= 16;
-		system_serial_high |= flash_readw(flash, FLASH_SER_OFF + 2);
-		system_serial_low = flash_readw(flash, FLASH_SER_OFF + 4);
-		system_serial_low <<= 16;
-		system_serial_low |= flash_readw(flash, FLASH_SER_OFF + 6);
-		__raw_writew(FLASH_CMD_READ_ARRAY, flash);
-
-		iounmap(flash);
-	}
-
-	switch (hw_bits & (CFG_HW_HAS_UART0 | CFG_HW_HAS_UART1)) {
-	case CFG_HW_HAS_UART0:
-		memset(&uart_data[1], 0, sizeof(uart_data[1]));
-		device_uarts.num_resources = 1;
-		break;
-
-	case CFG_HW_HAS_UART1:
-		device_uarts.dev.platform_data = &uart_data[1];
-		device_uarts.resource = &uart_resources[1];
-		device_uarts.num_resources = 1;
-		break;
-	}
-	if (hw_bits & (CFG_HW_HAS_UART0 | CFG_HW_HAS_UART1))
-		device_tab[devices++] = &device_uarts; /* max index 1 */
-
-	if (hw_bits & CFG_HW_HAS_ETH0)
-		device_tab[devices++] = &device_eth_tab[0]; /* max index 2 */
-	if (hw_bits & CFG_HW_HAS_ETH1)
-		device_tab[devices++] = &device_eth_tab[1]; /* max index 3 */
-
-	if (hw_bits & CFG_HW_HAS_HSS0)
-		device_tab[devices++] = &device_hss_tab[0]; /* max index 4 */
-	if (hw_bits & CFG_HW_HAS_HSS1)
-		device_tab[devices++] = &device_hss_tab[1]; /* max index 5 */
-
-	hss_plat[0].timer_freq = ixp4xx_timer_freq;
-	hss_plat[1].timer_freq = ixp4xx_timer_freq;
-
-	gpio_request(GPIO_SCL, "SCL/clock");
-	gpio_request(GPIO_SDA, "SDA/data");
-	gpio_request(GPIO_STR, "strobe");
-	gpio_request(GPIO_HSS0_RTS_N, "HSS0 RTS");
-	gpio_request(GPIO_HSS1_RTS_N, "HSS1 RTS");
-	gpio_request(GPIO_HSS0_DCD_N, "HSS0 DCD");
-	gpio_request(GPIO_HSS1_DCD_N, "HSS1 DCD");
-
-	gpio_direction_output(GPIO_SCL, 1);
-	gpio_direction_output(GPIO_SDA, 1);
-	gpio_direction_output(GPIO_STR, 0);
-	gpio_direction_output(GPIO_HSS0_RTS_N, 1);
-	gpio_direction_output(GPIO_HSS1_RTS_N, 1);
-	gpio_direction_input(GPIO_HSS0_DCD_N);
-	gpio_direction_input(GPIO_HSS1_DCD_N);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_HSS0_DCD_N), IRQ_TYPE_EDGE_BOTH);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N), IRQ_TYPE_EDGE_BOTH);
-
-	set_control(CONTROL_HSS0_DTR_N, 1);
-	set_control(CONTROL_HSS1_DTR_N, 1);
-	set_control(CONTROL_EEPROM_WC_N, 1);
-	set_control(CONTROL_PCI_RESET_N, 1);
-	output_control();
-
-	msleep(1);	      /* Wait for PCI devices to initialize */
-
-	flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-	flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
-
-	platform_add_devices(device_tab, devices);
-}
-
-
-#ifdef CONFIG_PCI
-static void __init gmlr_pci_preinit(void)
-{
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHA), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHB), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_NEC), IRQ_TYPE_LEVEL_LOW);
-	irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_MPCI), IRQ_TYPE_LEVEL_LOW);
-	ixp4xx_pci_preinit();
-}
-
-static void __init gmlr_pci_postinit(void)
-{
-	if ((hw_bits & CFG_HW_USB_PORTS) >= 2 &&
-	    (hw_bits & CFG_HW_USB_PORTS) < 5) {
-		/* need to adjust number of USB ports on NEC chip */
-		u32 value, addr = BIT(32 - SLOT_NEC) | 0xE0;
-		if (!ixp4xx_pci_read(addr, NP_CMD_CONFIGREAD, &value)) {
-			value &= ~7;
-			value |= (hw_bits & CFG_HW_USB_PORTS);
-			ixp4xx_pci_write(addr, NP_CMD_CONFIGWRITE, value);
-		}
-	}
-}
-
-static int __init gmlr_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	switch(slot) {
-	case SLOT_ETHA:	return IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHA);
-	case SLOT_ETHB:	return IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHB);
-	case SLOT_NEC:	return IXP4XX_GPIO_IRQ(GPIO_IRQ_NEC);
-	default:	return IXP4XX_GPIO_IRQ(GPIO_IRQ_MPCI);
-	}
-}
-
-static struct hw_pci gmlr_hw_pci __initdata = {
-	.nr_controllers = 1,
-	.ops		= &ixp4xx_ops,
-	.preinit	= gmlr_pci_preinit,
-	.postinit	= gmlr_pci_postinit,
-	.setup		= ixp4xx_setup,
-	.map_irq	= gmlr_map_irq,
-};
-
-static int __init gmlr_pci_init(void)
-{
-	if (machine_is_goramo_mlr() &&
-	    (hw_bits & (CFG_HW_USB_PORTS | CFG_HW_HAS_PCI_SLOT)))
-		pci_common_init(&gmlr_hw_pci);
-	return 0;
-}
-
-subsys_initcall(gmlr_pci_init);
-#endif /* CONFIG_PCI */
-
-
-MACHINE_START(GORAMO_MLR, "MultiLink")
-	/* Maintainer: Krzysztof Halasa */
-	.map_io		= ixp4xx_map_io,
-	.init_early	= ixp4xx_init_early,
-	.init_irq	= ixp4xx_init_irq,
-	.init_time	= ixp4xx_timer_init,
-	.atag_offset	= 0x100,
-	.init_machine	= gmlr_init,
-#if defined(CONFIG_PCI)
-	.dma_zone_size	= SZ_64M,
-#endif
-	.restart	= ixp4xx_restart,
-MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/include/mach/hardware.h b/arch/arm/mach-ixp4xx/include/mach/hardware.h
deleted file mode 100644
index b2b7301ce503..000000000000
--- a/arch/arm/mach-ixp4xx/include/mach/hardware.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-ixp4xx/include/mach/hardware.h 
- *
- * Copyright (C) 2002 Intel Corporation.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- */
-
-/*
- * Hardware definitions for IXP4xx based systems
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#define __ASM_ARCH_HARDWARE_H__
-
-#ifdef CONFIG_IXP4XX_INDIRECT_PCI
-#define PCIBIOS_MAX_MEM		0x4FFFFFFF
-#else
-#define PCIBIOS_MAX_MEM		0x4BFFFFFF
-#endif
-
-/* Register locations and bits */
-#include "ixp4xx-regs.h"
-
-#ifndef __ASSEMBLER__
-#include <linux/soc/ixp4xx/cpu.h>
-#endif
-
-/* Platform helper functions and definitions */
-#include "platform.h"
-
-#endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-ixp4xx/include/mach/io.h b/arch/arm/mach-ixp4xx/include/mach/io.h
deleted file mode 100644
index 014cf6dcaf8b..000000000000
--- a/arch/arm/mach-ixp4xx/include/mach/io.h
+++ /dev/null
@@ -1,545 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-ixp4xx/include/mach/io.h
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002-2005  MontaVista Software, Inc.
- */
-
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-
-#include <linux/bitops.h>
-
-#include <mach/hardware.h>
-
-extern int (*ixp4xx_pci_read)(u32 addr, u32 cmd, u32* data);
-extern int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data);
-
-
-/*
- * IXP4xx provides two methods of accessing PCI memory space:
- *
- * 1) A direct mapped window from 0x48000000 to 0x4BFFFFFF (64MB).
- *    To access PCI via this space, we simply ioremap() the BAR
- *    into the kernel and we can use the standard read[bwl]/write[bwl]
- *    macros. This is the preffered method due to speed but it
- *    limits the system to just 64MB of PCI memory. This can be
- *    problematic if using video cards and other memory-heavy targets.
- *
- * 2) If > 64MB of memory space is required, the IXP4xx can use indirect
- *    registers to access the whole 4 GB of PCI memory space (as we do below
- *    for I/O transactions). This allows currently for up to 1 GB (0x10000000
- *    to 0x4FFFFFFF) of memory on the bus. The disadvantage of this is that
- *    every PCI access requires three local register accesses plus a spinlock,
- *    but in some cases the performance hit is acceptable. In addition, you
- *    cannot mmap() PCI devices in this case.
- */
-#ifdef	CONFIG_IXP4XX_INDIRECT_PCI
-
-/*
- * In the case of using indirect PCI, we simply return the actual PCI
- * address and our read/write implementation use that to drive the 
- * access registers. If something outside of PCI is ioremap'd, we
- * fallback to the default.
- */
-
-extern unsigned long pcibios_min_mem;
-static inline int is_pci_memory(u32 addr)
-{
-	return (addr >= pcibios_min_mem) && (addr <= 0x4FFFFFFF);
-}
-
-#define writeb(v, p)			__indirect_writeb(v, p)
-#define writew(v, p)			__indirect_writew(v, p)
-#define writel(v, p)			__indirect_writel(v, p)
-
-#define writeb_relaxed(v, p)		__indirect_writeb(v, p)
-#define writew_relaxed(v, p)		__indirect_writew(v, p)
-#define writel_relaxed(v, p)		__indirect_writel(v, p)
-
-#define writesb(p, v, l)		__indirect_writesb(p, v, l)
-#define writesw(p, v, l)		__indirect_writesw(p, v, l)
-#define writesl(p, v, l)		__indirect_writesl(p, v, l)
-
-#define readb(p)			__indirect_readb(p)
-#define readw(p)			__indirect_readw(p)
-#define readl(p)			__indirect_readl(p)
-
-#define readb_relaxed(p)		__indirect_readb(p)
-#define readw_relaxed(p)		__indirect_readw(p)
-#define readl_relaxed(p)		__indirect_readl(p)
-
-#define readsb(p, v, l)			__indirect_readsb(p, v, l)
-#define readsw(p, v, l)			__indirect_readsw(p, v, l)
-#define readsl(p, v, l)			__indirect_readsl(p, v, l)
-
-static inline void __indirect_writeb(u8 value, volatile void __iomem *p)
-{
-	u32 addr = (u32)p;
-	u32 n, byte_enables, data;
-
-	if (!is_pci_memory(addr)) {
-		__raw_writeb(value, p);
-		return;
-	}
-
-	n = addr % 4;
-	byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
-	data = value << (8*n);
-	ixp4xx_pci_write(addr, byte_enables | NP_CMD_MEMWRITE, data);
-}
-
-static inline void __indirect_writesb(volatile void __iomem *bus_addr,
-				      const void *p, int count)
-{
-	const u8 *vaddr = p;
-
-	while (count--)
-		writeb(*vaddr++, bus_addr);
-}
-
-static inline void __indirect_writew(u16 value, volatile void __iomem *p)
-{
-	u32 addr = (u32)p;
-	u32 n, byte_enables, data;
-
-	if (!is_pci_memory(addr)) {
-		__raw_writew(value, p);
-		return;
-	}
-
-	n = addr % 4;
-	byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
-	data = value << (8*n);
-	ixp4xx_pci_write(addr, byte_enables | NP_CMD_MEMWRITE, data);
-}
-
-static inline void __indirect_writesw(volatile void __iomem *bus_addr,
-				      const void *p, int count)
-{
-	const u16 *vaddr = p;
-
-	while (count--)
-		writew(*vaddr++, bus_addr);
-}
-
-static inline void __indirect_writel(u32 value, volatile void __iomem *p)
-{
-	u32 addr = (__force u32)p;
-
-	if (!is_pci_memory(addr)) {
-		__raw_writel(value, p);
-		return;
-	}
-
-	ixp4xx_pci_write(addr, NP_CMD_MEMWRITE, value);
-}
-
-static inline void __indirect_writesl(volatile void __iomem *bus_addr,
-				      const void *p, int count)
-{
-	const u32 *vaddr = p;
-	while (count--)
-		writel(*vaddr++, bus_addr);
-}
-
-static inline u8 __indirect_readb(const volatile void __iomem *p)
-{
-	u32 addr = (u32)p;
-	u32 n, byte_enables, data;
-
-	if (!is_pci_memory(addr))
-		return __raw_readb(p);
-
-	n = addr % 4;
-	byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
-	if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_MEMREAD, &data))
-		return 0xff;
-
-	return data >> (8*n);
-}
-
-static inline void __indirect_readsb(const volatile void __iomem *bus_addr,
-				     void *p, u32 count)
-{
-	u8 *vaddr = p;
-
-	while (count--)
-		*vaddr++ = readb(bus_addr);
-}
-
-static inline u16 __indirect_readw(const volatile void __iomem *p)
-{
-	u32 addr = (u32)p;
-	u32 n, byte_enables, data;
-
-	if (!is_pci_memory(addr))
-		return __raw_readw(p);
-
-	n = addr % 4;
-	byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
-	if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_MEMREAD, &data))
-		return 0xffff;
-
-	return data>>(8*n);
-}
-
-static inline void __indirect_readsw(const volatile void __iomem *bus_addr,
-				     void *p, u32 count)
-{
-	u16 *vaddr = p;
-
-	while (count--)
-		*vaddr++ = readw(bus_addr);
-}
-
-static inline u32 __indirect_readl(const volatile void __iomem *p)
-{
-	u32 addr = (__force u32)p;
-	u32 data;
-
-	if (!is_pci_memory(addr))
-		return __raw_readl(p);
-
-	if (ixp4xx_pci_read(addr, NP_CMD_MEMREAD, &data))
-		return 0xffffffff;
-
-	return data;
-}
-
-static inline void __indirect_readsl(const volatile void __iomem *bus_addr,
-				     void *p, u32 count)
-{
-	u32 *vaddr = p;
-
-	while (count--)
-		*vaddr++ = readl(bus_addr);
-}
-
-
-/*
- * We can use the built-in functions b/c they end up calling writeb/readb
- */
-#define memset_io(c,v,l)		_memset_io((c),(v),(l))
-#define memcpy_fromio(a,c,l)		_memcpy_fromio((a),(c),(l))
-#define memcpy_toio(c,a,l)		_memcpy_toio((c),(a),(l))
-
-#endif /* CONFIG_IXP4XX_INDIRECT_PCI */
-
-#ifndef CONFIG_PCI
-
-#define	__io(v)		__typesafe_io(v)
-
-#else
-
-/*
- * IXP4xx does not have a transparent cpu -> PCI I/O translation
- * window.  Instead, it has a set of registers that must be tweaked
- * with the proper byte lanes, command types, and address for the
- * transaction.  This means that we need to override the default
- * I/O functions.
- */
-
-#define outb outb
-static inline void outb(u8 value, u32 addr)
-{
-	u32 n, byte_enables, data;
-	n = addr % 4;
-	byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
-	data = value << (8*n);
-	ixp4xx_pci_write(addr, byte_enables | NP_CMD_IOWRITE, data);
-}
-
-#define outsb outsb
-static inline void outsb(u32 io_addr, const void *p, u32 count)
-{
-	const u8 *vaddr = p;
-
-	while (count--)
-		outb(*vaddr++, io_addr);
-}
-
-#define outw outw
-static inline void outw(u16 value, u32 addr)
-{
-	u32 n, byte_enables, data;
-	n = addr % 4;
-	byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
-	data = value << (8*n);
-	ixp4xx_pci_write(addr, byte_enables | NP_CMD_IOWRITE, data);
-}
-
-#define outsw outsw
-static inline void outsw(u32 io_addr, const void *p, u32 count)
-{
-	const u16 *vaddr = p;
-	while (count--)
-		outw(cpu_to_le16(*vaddr++), io_addr);
-}
-
-#define outl outl
-static inline void outl(u32 value, u32 addr)
-{
-	ixp4xx_pci_write(addr, NP_CMD_IOWRITE, value);
-}
-
-#define outsl outsl
-static inline void outsl(u32 io_addr, const void *p, u32 count)
-{
-	const u32 *vaddr = p;
-	while (count--)
-		outl(cpu_to_le32(*vaddr++), io_addr);
-}
-
-#define inb inb
-static inline u8 inb(u32 addr)
-{
-	u32 n, byte_enables, data;
-	n = addr % 4;
-	byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
-	if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_IOREAD, &data))
-		return 0xff;
-
-	return data >> (8*n);
-}
-
-#define insb insb
-static inline void insb(u32 io_addr, void *p, u32 count)
-{
-	u8 *vaddr = p;
-	while (count--)
-		*vaddr++ = inb(io_addr);
-}
-
-#define inw inw
-static inline u16 inw(u32 addr)
-{
-	u32 n, byte_enables, data;
-	n = addr % 4;
-	byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
-	if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_IOREAD, &data))
-		return 0xffff;
-
-	return data>>(8*n);
-}
-
-#define insw insw
-static inline void insw(u32 io_addr, void *p, u32 count)
-{
-	u16 *vaddr = p;
-	while (count--)
-		*vaddr++ = le16_to_cpu(inw(io_addr));
-}
-
-#define inl inl
-static inline u32 inl(u32 addr)
-{
-	u32 data;
-	if (ixp4xx_pci_read(addr, NP_CMD_IOREAD, &data))
-		return 0xffffffff;
-
-	return data;
-}
-
-#define insl insl
-static inline void insl(u32 io_addr, void *p, u32 count)
-{
-	u32 *vaddr = p;
-	while (count--)
-		*vaddr++ = le32_to_cpu(inl(io_addr));
-}
-
-#define PIO_OFFSET      0x10000UL
-#define PIO_MASK        0x0ffffUL
-
-#define	__is_io_address(p)	(((unsigned long)p >= PIO_OFFSET) && \
-					((unsigned long)p <= (PIO_MASK + PIO_OFFSET)))
-
-#define	ioread8(p)			ioread8(p)
-static inline u8 ioread8(const void __iomem *addr)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		return (unsigned int)inb(port & PIO_MASK);
-	else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		return (unsigned int)__raw_readb(addr);
-#else
-		return (unsigned int)__indirect_readb(addr);
-#endif
-}
-
-#define	ioread8_rep(p, v, c)		ioread8_rep(p, v, c)
-static inline void ioread8_rep(const void __iomem *addr, void *vaddr, u32 count)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		insb(port & PIO_MASK, vaddr, count);
-	else
-#ifndef	CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_readsb(addr, vaddr, count);
-#else
-		__indirect_readsb(addr, vaddr, count);
-#endif
-}
-
-#define	ioread16(p)			ioread16(p)
-static inline u16 ioread16(const void __iomem *addr)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		return	(unsigned int)inw(port & PIO_MASK);
-	else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		return le16_to_cpu((__force __le16)__raw_readw(addr));
-#else
-		return (unsigned int)__indirect_readw(addr);
-#endif
-}
-
-#define	ioread16_rep(p, v, c)		ioread16_rep(p, v, c)
-static inline void ioread16_rep(const void __iomem *addr, void *vaddr,
-				u32 count)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		insw(port & PIO_MASK, vaddr, count);
-	else
-#ifndef	CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_readsw(addr, vaddr, count);
-#else
-		__indirect_readsw(addr, vaddr, count);
-#endif
-}
-
-#define	ioread32(p)			ioread32(p)
-static inline u32 ioread32(const void __iomem *addr)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		return	(unsigned int)inl(port & PIO_MASK);
-	else {
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		return le32_to_cpu((__force __le32)__raw_readl(addr));
-#else
-		return (unsigned int)__indirect_readl(addr);
-#endif
-	}
-}
-
-#define	ioread32_rep(p, v, c)		ioread32_rep(p, v, c)
-static inline void ioread32_rep(const void __iomem *addr, void *vaddr,
-				u32 count)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		insl(port & PIO_MASK, vaddr, count);
-	else
-#ifndef	CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_readsl(addr, vaddr, count);
-#else
-		__indirect_readsl(addr, vaddr, count);
-#endif
-}
-
-#define	iowrite8(v, p)			iowrite8(v, p)
-static inline void iowrite8(u8 value, void __iomem *addr)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		outb(value, port & PIO_MASK);
-	else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_writeb(value, addr);
-#else
-		__indirect_writeb(value, addr);
-#endif
-}
-
-#define	iowrite8_rep(p, v, c)		iowrite8_rep(p, v, c)
-static inline void iowrite8_rep(void __iomem *addr, const void *vaddr,
-				u32 count)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		outsb(port & PIO_MASK, vaddr, count);
-	else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_writesb(addr, vaddr, count);
-#else
-		__indirect_writesb(addr, vaddr, count);
-#endif
-}
-
-#define	iowrite16(v, p)			iowrite16(v, p)
-static inline void iowrite16(u16 value, void __iomem *addr)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		outw(value, port & PIO_MASK);
-	else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_writew(cpu_to_le16(value), addr);
-#else
-		__indirect_writew(value, addr);
-#endif
-}
-
-#define	iowrite16_rep(p, v, c)		iowrite16_rep(p, v, c)
-static inline void iowrite16_rep(void __iomem *addr, const void *vaddr,
-				 u32 count)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		outsw(port & PIO_MASK, vaddr, count);
-	else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_writesw(addr, vaddr, count);
-#else
-		__indirect_writesw(addr, vaddr, count);
-#endif
-}
-
-#define	iowrite32(v, p)			iowrite32(v, p)
-static inline void iowrite32(u32 value, void __iomem *addr)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		outl(value, port & PIO_MASK);
-	else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_writel((u32 __force)cpu_to_le32(value), addr);
-#else
-		__indirect_writel(value, addr);
-#endif
-}
-
-#define	iowrite32_rep(p, v, c)		iowrite32_rep(p, v, c)
-static inline void iowrite32_rep(void __iomem *addr, const void *vaddr,
-				 u32 count)
-{
-	unsigned long port = (unsigned long __force)addr;
-	if (__is_io_address(port))
-		outsl(port & PIO_MASK, vaddr, count);
-	else
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-		__raw_writesl(addr, vaddr, count);
-#else
-		__indirect_writesl(addr, vaddr, count);
-#endif
-}
-
-#define ioport_map(port, nr) ioport_map(port, nr)
-static inline void __iomem *ioport_map(unsigned long port, unsigned int nr)
-{
-	return ((void __iomem*)((port) + PIO_OFFSET));
-}
-#define	ioport_unmap(addr) ioport_unmap(addr)
-static inline void ioport_unmap(void __iomem *addr)
-{
-}
-#endif /* CONFIG_PCI */
-
-#endif /* __ASM_ARM_ARCH_IO_H */
diff --git a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
deleted file mode 100644
index 74e63d4531aa..000000000000
--- a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
+++ /dev/null
@@ -1,303 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
- *
- * Register definitions for IXP4xx chipset. This file contains 
- * register location and bit definitions only. Platform specific 
- * definitions and helper function declarations are in platform.h 
- * and machine-name.h.
- *
- * Copyright (C) 2002 Intel Corporation.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- */
-
-#ifndef _ASM_ARM_IXP4XX_H_
-#define _ASM_ARM_IXP4XX_H_
-
-/*
- * IXP4xx Linux Memory Map:
- *
- * Phy		Size		Virt		Description
- * =========================================================================
- *
- * 0x00000000	0x10000000(max)	PAGE_OFFSET	System RAM
- *
- * 0x48000000	0x04000000	ioremap'd	PCI Memory Space
- *
- * 0x50000000	0x10000000	ioremap'd	EXP BUS
- *
- * 0xC8000000	0x00013000	0xFEF00000	On-Chip Peripherals
- *
- * 0xC0000000	0x00001000	0xFEF13000	PCI CFG
- *
- * 0xC4000000	0x00001000	0xFEF14000	EXP CFG
- *
- * 0x60000000	0x00004000	0xFEF15000	QMgr
- */
-
-/*
- * Queue Manager
- */
-#define IXP4XX_QMGR_BASE_PHYS		0x60000000
-
-/*
- * Peripheral space, including debug UART. Must be section-aligned so that
- * it can be used with the low-level debug code.
- */
-#define IXP4XX_PERIPHERAL_BASE_PHYS	0xC8000000
-#define IXP4XX_PERIPHERAL_BASE_VIRT	IOMEM(0xFEC00000)
-#define IXP4XX_PERIPHERAL_REGION_SIZE	0x00013000
-
-/*
- * PCI Config registers
- */
-#define IXP4XX_PCI_CFG_BASE_PHYS	0xC0000000
-#define IXP4XX_PCI_CFG_BASE_VIRT	IOMEM(0xFEC13000)
-#define IXP4XX_PCI_CFG_REGION_SIZE	0x00001000
-
-/*
- * Expansion BUS Configuration registers
- */
-#define IXP4XX_EXP_CFG_BASE_PHYS	0xC4000000
-#define IXP4XX_EXP_CFG_BASE_VIRT	0xFEC14000
-#define IXP4XX_EXP_CFG_REGION_SIZE	0x00001000
-
-#define IXP4XX_EXP_CS0_OFFSET	0x00
-#define IXP4XX_EXP_CS1_OFFSET   0x04
-#define IXP4XX_EXP_CS2_OFFSET   0x08
-#define IXP4XX_EXP_CS3_OFFSET   0x0C
-#define IXP4XX_EXP_CS4_OFFSET   0x10
-#define IXP4XX_EXP_CS5_OFFSET   0x14
-#define IXP4XX_EXP_CS6_OFFSET   0x18
-#define IXP4XX_EXP_CS7_OFFSET   0x1C
-#define IXP4XX_EXP_CFG0_OFFSET	0x20
-#define IXP4XX_EXP_CFG1_OFFSET	0x24
-#define IXP4XX_EXP_CFG2_OFFSET	0x28
-#define IXP4XX_EXP_CFG3_OFFSET	0x2C
-
-/*
- * Expansion Bus Controller registers.
- */
-#define IXP4XX_EXP_REG(x) ((volatile u32 __iomem *)(IXP4XX_EXP_CFG_BASE_VIRT+(x)))
-
-#define IXP4XX_EXP_CS0      IXP4XX_EXP_REG(IXP4XX_EXP_CS0_OFFSET)
-#define IXP4XX_EXP_CS1      IXP4XX_EXP_REG(IXP4XX_EXP_CS1_OFFSET)
-#define IXP4XX_EXP_CS2      IXP4XX_EXP_REG(IXP4XX_EXP_CS2_OFFSET) 
-#define IXP4XX_EXP_CS3      IXP4XX_EXP_REG(IXP4XX_EXP_CS3_OFFSET)
-#define IXP4XX_EXP_CS4      IXP4XX_EXP_REG(IXP4XX_EXP_CS4_OFFSET)
-#define IXP4XX_EXP_CS5      IXP4XX_EXP_REG(IXP4XX_EXP_CS5_OFFSET)
-#define IXP4XX_EXP_CS6      IXP4XX_EXP_REG(IXP4XX_EXP_CS6_OFFSET)     
-#define IXP4XX_EXP_CS7      IXP4XX_EXP_REG(IXP4XX_EXP_CS7_OFFSET)
-
-#define IXP4XX_EXP_CFG0     IXP4XX_EXP_REG(IXP4XX_EXP_CFG0_OFFSET) 
-#define IXP4XX_EXP_CFG1     IXP4XX_EXP_REG(IXP4XX_EXP_CFG1_OFFSET) 
-#define IXP4XX_EXP_CFG2     IXP4XX_EXP_REG(IXP4XX_EXP_CFG2_OFFSET) 
-#define IXP4XX_EXP_CFG3     IXP4XX_EXP_REG(IXP4XX_EXP_CFG3_OFFSET)
-
-
-/*
- * Peripheral Space Register Region Base Addresses
- */
-#define IXP4XX_UART1_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x0000)
-#define IXP4XX_UART2_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x1000)
-#define IXP4XX_PMU_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x2000)
-#define IXP4XX_INTC_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x3000)
-#define IXP4XX_GPIO_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x4000)
-#define IXP4XX_TIMER_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x5000)
-#define IXP4XX_NPEA_BASE_PHYS   	(IXP4XX_PERIPHERAL_BASE_PHYS + 0x6000)
-#define IXP4XX_NPEB_BASE_PHYS   	(IXP4XX_PERIPHERAL_BASE_PHYS + 0x7000)
-#define IXP4XX_NPEC_BASE_PHYS   	(IXP4XX_PERIPHERAL_BASE_PHYS + 0x8000)
-#define IXP4XX_EthB_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x9000)
-#define IXP4XX_EthC_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xA000)
-#define IXP4XX_USB_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xB000)
-/* ixp46X only */
-#define IXP4XX_EthA_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xC000)
-#define IXP4XX_EthB1_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xD000)
-#define IXP4XX_EthB2_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xE000)
-#define IXP4XX_EthB3_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xF000)
-#define IXP4XX_TIMESYNC_BASE_PHYS	(IXP4XX_PERIPHERAL_BASE_PHYS + 0x10000)
-#define IXP4XX_I2C_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x11000)
-#define IXP4XX_SSP_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x12000)
-
-
-/* The UART is explicitly put in the beginning of fixmap */
-#define IXP4XX_UART1_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x0000)
-#define IXP4XX_UART2_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x1000)
-#define IXP4XX_PMU_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x2000)
-#define IXP4XX_INTC_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x3000)
-#define IXP4XX_GPIO_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x4000)
-#define IXP4XX_TIMER_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x5000)
-#define IXP4XX_EthB_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x9000)
-#define IXP4XX_EthC_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xA000)
-#define IXP4XX_USB_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xB000)
-/* ixp46X only */
-#define IXP4XX_EthA_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xC000)
-#define IXP4XX_EthB1_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xD000)
-#define IXP4XX_EthB2_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xE000)
-#define IXP4XX_EthB3_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xF000)
-#define IXP4XX_TIMESYNC_BASE_VIRT	(IXP4XX_PERIPHERAL_BASE_VIRT + 0x10000)
-#define IXP4XX_I2C_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x11000)
-#define IXP4XX_SSP_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x12000)
-
-/*
- * Constants to make it easy to access Timer Control/Status registers
- */
-#define IXP4XX_OSTS_OFFSET	0x00  /* Continious TimeStamp */
-#define IXP4XX_OST1_OFFSET	0x04  /* Timer 1 Timestamp */
-#define IXP4XX_OSRT1_OFFSET	0x08  /* Timer 1 Reload */
-#define IXP4XX_OST2_OFFSET	0x0C  /* Timer 2 Timestamp */
-#define IXP4XX_OSRT2_OFFSET	0x10  /* Timer 2 Reload */
-#define IXP4XX_OSWT_OFFSET	0x14  /* Watchdog Timer */
-#define IXP4XX_OSWE_OFFSET	0x18  /* Watchdog Enable */
-#define IXP4XX_OSWK_OFFSET	0x1C  /* Watchdog Key */
-#define IXP4XX_OSST_OFFSET	0x20  /* Timer Status */
-
-/*
- * Operating System Timer Register Definitions.
- */
-
-#define IXP4XX_TIMER_REG(x) ((volatile u32 *)(IXP4XX_TIMER_BASE_VIRT+(x)))
-
-#define IXP4XX_OSTS	IXP4XX_TIMER_REG(IXP4XX_OSTS_OFFSET)
-#define IXP4XX_OST1	IXP4XX_TIMER_REG(IXP4XX_OST1_OFFSET)
-#define IXP4XX_OSRT1	IXP4XX_TIMER_REG(IXP4XX_OSRT1_OFFSET)
-#define IXP4XX_OST2	IXP4XX_TIMER_REG(IXP4XX_OST2_OFFSET)
-#define IXP4XX_OSRT2	IXP4XX_TIMER_REG(IXP4XX_OSRT2_OFFSET)
-#define IXP4XX_OSWT	IXP4XX_TIMER_REG(IXP4XX_OSWT_OFFSET)
-#define IXP4XX_OSWE	IXP4XX_TIMER_REG(IXP4XX_OSWE_OFFSET)
-#define IXP4XX_OSWK	IXP4XX_TIMER_REG(IXP4XX_OSWK_OFFSET)
-#define IXP4XX_OSST	IXP4XX_TIMER_REG(IXP4XX_OSST_OFFSET)
-
-/*
- * Timer register values and bit definitions 
- */
-#define IXP4XX_OST_ENABLE		0x00000001
-#define IXP4XX_OST_ONE_SHOT		0x00000002
-/* Low order bits of reload value ignored */
-#define IXP4XX_OST_RELOAD_MASK		0x00000003
-#define IXP4XX_OST_DISABLED		0x00000000
-#define IXP4XX_OSST_TIMER_1_PEND	0x00000001
-#define IXP4XX_OSST_TIMER_2_PEND	0x00000002
-#define IXP4XX_OSST_TIMER_TS_PEND	0x00000004
-#define IXP4XX_OSST_TIMER_WDOG_PEND	0x00000008
-#define IXP4XX_OSST_TIMER_WARM_RESET	0x00000010
-
-#define	IXP4XX_WDT_KEY			0x0000482E
-
-#define	IXP4XX_WDT_RESET_ENABLE		0x00000001
-#define	IXP4XX_WDT_IRQ_ENABLE		0x00000002
-#define	IXP4XX_WDT_COUNT_ENABLE		0x00000004
-
-
-/*
- * Constants to make it easy to access PCI Control/Status registers
- */
-#define PCI_NP_AD_OFFSET            0x00
-#define PCI_NP_CBE_OFFSET           0x04
-#define PCI_NP_WDATA_OFFSET         0x08
-#define PCI_NP_RDATA_OFFSET         0x0c
-#define PCI_CRP_AD_CBE_OFFSET       0x10
-#define PCI_CRP_WDATA_OFFSET        0x14
-#define PCI_CRP_RDATA_OFFSET        0x18
-#define PCI_CSR_OFFSET              0x1c
-#define PCI_ISR_OFFSET              0x20
-#define PCI_INTEN_OFFSET            0x24
-#define PCI_DMACTRL_OFFSET          0x28
-#define PCI_AHBMEMBASE_OFFSET       0x2c
-#define PCI_AHBIOBASE_OFFSET        0x30
-#define PCI_PCIMEMBASE_OFFSET       0x34
-#define PCI_AHBDOORBELL_OFFSET      0x38
-#define PCI_PCIDOORBELL_OFFSET      0x3C
-#define PCI_ATPDMA0_AHBADDR_OFFSET  0x40
-#define PCI_ATPDMA0_PCIADDR_OFFSET  0x44
-#define PCI_ATPDMA0_LENADDR_OFFSET  0x48
-#define PCI_ATPDMA1_AHBADDR_OFFSET  0x4C
-#define PCI_ATPDMA1_PCIADDR_OFFSET  0x50
-#define PCI_ATPDMA1_LENADDR_OFFSET	0x54
-
-/*
- * PCI Control/Status Registers
- */
-#define _IXP4XX_PCI_CSR(x) ((volatile u32 *)(IXP4XX_PCI_CFG_BASE_VIRT+(x)))
-
-#define PCI_NP_AD               _IXP4XX_PCI_CSR(PCI_NP_AD_OFFSET)
-#define PCI_NP_CBE              _IXP4XX_PCI_CSR(PCI_NP_CBE_OFFSET)
-#define PCI_NP_WDATA            _IXP4XX_PCI_CSR(PCI_NP_WDATA_OFFSET)
-#define PCI_NP_RDATA            _IXP4XX_PCI_CSR(PCI_NP_RDATA_OFFSET)
-#define PCI_CRP_AD_CBE          _IXP4XX_PCI_CSR(PCI_CRP_AD_CBE_OFFSET)
-#define PCI_CRP_WDATA           _IXP4XX_PCI_CSR(PCI_CRP_WDATA_OFFSET)
-#define PCI_CRP_RDATA           _IXP4XX_PCI_CSR(PCI_CRP_RDATA_OFFSET)
-#define PCI_CSR                 _IXP4XX_PCI_CSR(PCI_CSR_OFFSET) 
-#define PCI_ISR                 _IXP4XX_PCI_CSR(PCI_ISR_OFFSET)
-#define PCI_INTEN               _IXP4XX_PCI_CSR(PCI_INTEN_OFFSET)
-#define PCI_DMACTRL             _IXP4XX_PCI_CSR(PCI_DMACTRL_OFFSET)
-#define PCI_AHBMEMBASE          _IXP4XX_PCI_CSR(PCI_AHBMEMBASE_OFFSET)
-#define PCI_AHBIOBASE           _IXP4XX_PCI_CSR(PCI_AHBIOBASE_OFFSET)
-#define PCI_PCIMEMBASE          _IXP4XX_PCI_CSR(PCI_PCIMEMBASE_OFFSET)
-#define PCI_AHBDOORBELL         _IXP4XX_PCI_CSR(PCI_AHBDOORBELL_OFFSET)
-#define PCI_PCIDOORBELL         _IXP4XX_PCI_CSR(PCI_PCIDOORBELL_OFFSET)
-#define PCI_ATPDMA0_AHBADDR     _IXP4XX_PCI_CSR(PCI_ATPDMA0_AHBADDR_OFFSET)
-#define PCI_ATPDMA0_PCIADDR     _IXP4XX_PCI_CSR(PCI_ATPDMA0_PCIADDR_OFFSET)
-#define PCI_ATPDMA0_LENADDR     _IXP4XX_PCI_CSR(PCI_ATPDMA0_LENADDR_OFFSET)
-#define PCI_ATPDMA1_AHBADDR     _IXP4XX_PCI_CSR(PCI_ATPDMA1_AHBADDR_OFFSET)
-#define PCI_ATPDMA1_PCIADDR     _IXP4XX_PCI_CSR(PCI_ATPDMA1_PCIADDR_OFFSET)
-#define PCI_ATPDMA1_LENADDR     _IXP4XX_PCI_CSR(PCI_ATPDMA1_LENADDR_OFFSET)
-
-/*
- * PCI register values and bit definitions 
- */
-
-/* CSR bit definitions */
-#define PCI_CSR_HOST    	0x00000001
-#define PCI_CSR_ARBEN   	0x00000002
-#define PCI_CSR_ADS     	0x00000004
-#define PCI_CSR_PDS     	0x00000008
-#define PCI_CSR_ABE     	0x00000010
-#define PCI_CSR_DBT     	0x00000020
-#define PCI_CSR_ASE     	0x00000100
-#define PCI_CSR_IC      	0x00008000
-
-/* ISR (Interrupt status) Register bit definitions */
-#define PCI_ISR_PSE     	0x00000001
-#define PCI_ISR_PFE     	0x00000002
-#define PCI_ISR_PPE     	0x00000004
-#define PCI_ISR_AHBE    	0x00000008
-#define PCI_ISR_APDC    	0x00000010
-#define PCI_ISR_PADC    	0x00000020
-#define PCI_ISR_ADB     	0x00000040
-#define PCI_ISR_PDB     	0x00000080
-
-/* INTEN (Interrupt Enable) Register bit definitions */
-#define PCI_INTEN_PSE   	0x00000001
-#define PCI_INTEN_PFE   	0x00000002
-#define PCI_INTEN_PPE   	0x00000004
-#define PCI_INTEN_AHBE  	0x00000008
-#define PCI_INTEN_APDC  	0x00000010
-#define PCI_INTEN_PADC  	0x00000020
-#define PCI_INTEN_ADB   	0x00000040
-#define PCI_INTEN_PDB   	0x00000080
-
-/*
- * Shift value for byte enable on NP cmd/byte enable register
- */
-#define IXP4XX_PCI_NP_CBE_BESL		4
-
-/*
- * PCI commands supported by NP access unit
- */
-#define NP_CMD_IOREAD			0x2
-#define NP_CMD_IOWRITE			0x3
-#define NP_CMD_CONFIGREAD		0xa
-#define NP_CMD_CONFIGWRITE		0xb
-#define NP_CMD_MEMREAD			0x6
-#define	NP_CMD_MEMWRITE			0x7
-
-/*
- * Constants for CRP access into local config space
- */
-#define CRP_AD_CBE_BESL         20
-#define CRP_AD_CBE_WRITE	0x00010000
-
-#define DCMD_LENGTH	0x01fff		/* length mask (max = 8K - 1) */
-
-#endif
diff --git a/arch/arm/mach-ixp4xx/include/mach/platform.h b/arch/arm/mach-ixp4xx/include/mach/platform.h
deleted file mode 100644
index d8b4df96db08..000000000000
--- a/arch/arm/mach-ixp4xx/include/mach/platform.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * arch/arm/mach-ixp4xx/include/mach/platform.h
- *
- * Constants and functions that are useful to IXP4xx platform-specific code
- * and device drivers.
- *
- * Copyright (C) 2004 MontaVista Software, Inc.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <mach/hardware.h>"
-#endif
-
-#ifndef __ASSEMBLY__
-
-#include <linux/reboot.h>
-#include <linux/platform_data/eth_ixp4xx.h>
-
-#include <asm/types.h>
-
-#ifndef	__ARMEB__
-#define	REG_OFFSET	0
-#else
-#define	REG_OFFSET	3
-#endif
-
-/*
- * Expansion bus memory regions
- */
-#define IXP4XX_EXP_BUS_BASE_PHYS	(0x50000000)
-
-/*
- * The expansion bus on the IXP4xx can be configured for either 16 or
- * 32MB windows and the CS offset for each region changes based on the
- * current configuration. This means that we cannot simply hardcode
- * each offset. ixp4xx_sys_init() looks at the expansion bus configuration
- * as setup by the bootloader to determine our window size.
- */
-extern unsigned long ixp4xx_exp_bus_size;
-
-#define	IXP4XX_EXP_BUS_BASE(region)\
-		(IXP4XX_EXP_BUS_BASE_PHYS + ((region) * ixp4xx_exp_bus_size))
-
-#define IXP4XX_EXP_BUS_END(region)\
-		(IXP4XX_EXP_BUS_BASE(region) + ixp4xx_exp_bus_size - 1)
-
-/* Those macros can be used to adjust timing and configure
- * other features for each region.
- */
-
-#define IXP4XX_EXP_BUS_RECOVERY_T(x)	(((x) & 0x0f) << 16)
-#define IXP4XX_EXP_BUS_HOLD_T(x)	(((x) & 0x03) << 20)
-#define IXP4XX_EXP_BUS_STROBE_T(x)	(((x) & 0x0f) << 22)
-#define IXP4XX_EXP_BUS_SETUP_T(x)	(((x) & 0x03) << 26)
-#define IXP4XX_EXP_BUS_ADDR_T(x)	(((x) & 0x03) << 28)
-#define IXP4XX_EXP_BUS_SIZE(x)		(((x) & 0x0f) << 10)
-#define IXP4XX_EXP_BUS_CYCLES(x)	(((x) & 0x03) << 14)
-
-#define IXP4XX_EXP_BUS_CS_EN		(1L << 31)
-#define IXP4XX_EXP_BUS_BYTE_RD16	(1L << 6)
-#define IXP4XX_EXP_BUS_HRDY_POL		(1L << 5)
-#define IXP4XX_EXP_BUS_MUX_EN		(1L << 4)
-#define IXP4XX_EXP_BUS_SPLT_EN		(1L << 3)
-#define IXP4XX_EXP_BUS_WR_EN		(1L << 1)
-#define IXP4XX_EXP_BUS_BYTE_EN		(1L << 0)
-
-#define IXP4XX_EXP_BUS_CYCLES_INTEL	0x00
-#define IXP4XX_EXP_BUS_CYCLES_MOTOROLA	0x01
-#define IXP4XX_EXP_BUS_CYCLES_HPI	0x02
-
-#define IXP4XX_FLASH_WRITABLE	(0x2)
-#define IXP4XX_FLASH_DEFAULT	(0xbcd23c40)
-#define IXP4XX_FLASH_WRITE	(0xbcd23c42)
-
-/*
- * Clock Speed Definitions.
- */
-#define IXP4XX_PERIPHERAL_BUS_CLOCK 	(66) /* 66MHzi APB BUS   */ 
-#define IXP4XX_UART_XTAL        	14745600
-
-/*
- * Frequency of clock used for primary clocksource
- */
-extern unsigned long ixp4xx_timer_freq;
-
-/*
- * Functions used by platform-level setup code
- */
-extern void ixp4xx_map_io(void);
-extern void ixp4xx_init_early(void);
-extern void ixp4xx_init_irq(void);
-extern void ixp4xx_sys_init(void);
-extern void ixp4xx_timer_init(void);
-extern void ixp4xx_restart(enum reboot_mode, const char *);
-extern void ixp4xx_pci_preinit(void);
-struct pci_sys_data;
-extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
-extern struct pci_ops ixp4xx_ops;
-
-#endif // __ASSEMBLY__
-
diff --git a/arch/arm/mach-ixp4xx/include/mach/udc.h b/arch/arm/mach-ixp4xx/include/mach/udc.h
deleted file mode 100644
index 7bd8b96c8843..000000000000
--- a/arch/arm/mach-ixp4xx/include/mach/udc.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/include/mach/udc.h
- *
- */
-#include <linux/platform_data/pxa2xx_udc.h>
-
-extern void ixp4xx_set_udc_info(struct pxa2xx_udc_mach_info *info);
-
diff --git a/arch/arm/mach-ixp4xx/include/mach/uncompress.h b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
index 9e08b270cfc7..09e7663e6a55 100644
--- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
+++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
@@ -9,10 +9,12 @@
 #ifndef _ARCH_UNCOMPRESS_H_
 #define _ARCH_UNCOMPRESS_H_
 
-#include "ixp4xx-regs.h"
 #include <asm/mach-types.h>
 #include <linux/serial_reg.h>
 
+#define IXP4XX_UART1_BASE_PHYS 0xc8000000
+#define IXP4XX_UART2_BASE_PHYS 0xc8001000
+
 #define TX_DONE (UART_LSR_TEMT|UART_LSR_THRE)
 
 volatile u32* uart_base;
diff --git a/arch/arm/mach-ixp4xx/irqs.h b/arch/arm/mach-ixp4xx/irqs.h
deleted file mode 100644
index a3e8d6408c56..000000000000
--- a/arch/arm/mach-ixp4xx/irqs.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * arch/arm/mach-ixp4xx/include/mach/irqs.h 
- *
- * IRQ definitions for IXP4XX based systems
- *
- * Copyright (C) 2002 Intel Corporation.
- * Copyright (C) 2003 MontaVista Software, Inc.
- */
-
-#ifndef _ARCH_IXP4XX_IRQS_H_
-#define _ARCH_IXP4XX_IRQS_H_
-
-#define IRQ_IXP4XX_BASE		16
-
-#define IRQ_IXP4XX_NPEA		(IRQ_IXP4XX_BASE + 0)
-#define IRQ_IXP4XX_NPEB		(IRQ_IXP4XX_BASE + 1)
-#define IRQ_IXP4XX_NPEC		(IRQ_IXP4XX_BASE + 2)
-#define IRQ_IXP4XX_QM1		(IRQ_IXP4XX_BASE + 3)
-#define IRQ_IXP4XX_QM2		(IRQ_IXP4XX_BASE + 4)
-#define IRQ_IXP4XX_TIMER1	(IRQ_IXP4XX_BASE + 5)
-#define IRQ_IXP4XX_GPIO0	(IRQ_IXP4XX_BASE + 6)
-#define IRQ_IXP4XX_GPIO1	(IRQ_IXP4XX_BASE + 7)
-#define IRQ_IXP4XX_PCI_INT	(IRQ_IXP4XX_BASE + 8)
-#define IRQ_IXP4XX_PCI_DMA1	(IRQ_IXP4XX_BASE + 9)
-#define IRQ_IXP4XX_PCI_DMA2	(IRQ_IXP4XX_BASE + 10)
-#define IRQ_IXP4XX_TIMER2	(IRQ_IXP4XX_BASE + 11)
-#define IRQ_IXP4XX_USB		(IRQ_IXP4XX_BASE + 12)
-#define IRQ_IXP4XX_UART2	(IRQ_IXP4XX_BASE + 13)
-#define IRQ_IXP4XX_TIMESTAMP	(IRQ_IXP4XX_BASE + 14)
-#define IRQ_IXP4XX_UART1	(IRQ_IXP4XX_BASE + 15)
-#define IRQ_IXP4XX_WDOG		(IRQ_IXP4XX_BASE + 16)
-#define IRQ_IXP4XX_AHB_PMU	(IRQ_IXP4XX_BASE + 17)
-#define IRQ_IXP4XX_XSCALE_PMU	(IRQ_IXP4XX_BASE + 18)
-#define IRQ_IXP4XX_GPIO2	(IRQ_IXP4XX_BASE + 19)
-#define IRQ_IXP4XX_GPIO3	(IRQ_IXP4XX_BASE + 20)
-#define IRQ_IXP4XX_GPIO4	(IRQ_IXP4XX_BASE + 21)
-#define IRQ_IXP4XX_GPIO5	(IRQ_IXP4XX_BASE + 22)
-#define IRQ_IXP4XX_GPIO6	(IRQ_IXP4XX_BASE + 23)
-#define IRQ_IXP4XX_GPIO7	(IRQ_IXP4XX_BASE + 24)
-#define IRQ_IXP4XX_GPIO8	(IRQ_IXP4XX_BASE + 25)
-#define IRQ_IXP4XX_GPIO9	(IRQ_IXP4XX_BASE + 26)
-#define IRQ_IXP4XX_GPIO10	(IRQ_IXP4XX_BASE + 27)
-#define IRQ_IXP4XX_GPIO11	(IRQ_IXP4XX_BASE + 28)
-#define IRQ_IXP4XX_GPIO12	(IRQ_IXP4XX_BASE + 29)
-#define IRQ_IXP4XX_SW_INT1	(IRQ_IXP4XX_BASE + 30)
-#define IRQ_IXP4XX_SW_INT2	(IRQ_IXP4XX_BASE + 31)
-#define IRQ_IXP4XX_USB_HOST	(IRQ_IXP4XX_BASE + 32)
-#define IRQ_IXP4XX_I2C		(IRQ_IXP4XX_BASE + 33)
-#define IRQ_IXP4XX_SSP		(IRQ_IXP4XX_BASE + 34)
-#define IRQ_IXP4XX_TSYNC	(IRQ_IXP4XX_BASE + 35)
-#define IRQ_IXP4XX_EAU_DONE	(IRQ_IXP4XX_BASE + 36)
-#define IRQ_IXP4XX_SHA_DONE	(IRQ_IXP4XX_BASE + 37)
-#define IRQ_IXP4XX_SWCP_PE	(IRQ_IXP4XX_BASE + 58)
-#define IRQ_IXP4XX_QM_PE	(IRQ_IXP4XX_BASE + 60)
-#define IRQ_IXP4XX_MCU_ECC	(IRQ_IXP4XX_BASE + 61)
-#define IRQ_IXP4XX_EXP_PE	(IRQ_IXP4XX_BASE + 62)
-
-#define _IXP4XX_GPIO_IRQ(n)	(IRQ_IXP4XX_GPIO ## n)
-#define IXP4XX_GPIO_IRQ(n)	_IXP4XX_GPIO_IRQ(n)
-
-#define	XSCALE_PMU_IRQ		(IRQ_IXP4XX_XSCALE_PMU)
-
-#endif
diff --git a/arch/arm/mach-mmp/sram.c b/arch/arm/mach-mmp/sram.c
index 6794e2db1ad5..ecc46c31004f 100644
--- a/arch/arm/mach-mmp/sram.c
+++ b/arch/arm/mach-mmp/sram.c
@@ -72,6 +72,8 @@ static int sram_probe(struct platform_device *pdev)
 	if (!info)
 		return -ENOMEM;
 
+	platform_set_drvdata(pdev, info);
+
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (res == NULL) {
 		dev_err(&pdev->dev, "no memory resource defined\n");
@@ -107,8 +109,6 @@ static int sram_probe(struct platform_device *pdev)
 	list_add(&info->node, &sram_bank_list);
 	mutex_unlock(&sram_lock);
 
-	platform_set_drvdata(pdev, info);
-
 	dev_info(&pdev->dev, "initialized\n");
 	return 0;
 
@@ -127,17 +127,19 @@ static int sram_remove(struct platform_device *pdev)
 	struct sram_bank_info *info;
 
 	info = platform_get_drvdata(pdev);
-	if (info == NULL)
-		return -ENODEV;
 
-	mutex_lock(&sram_lock);
-	list_del(&info->node);
-	mutex_unlock(&sram_lock);
+	if (info->sram_size) {
+		mutex_lock(&sram_lock);
+		list_del(&info->node);
+		mutex_unlock(&sram_lock);
+
+		gen_pool_destroy(info->gpool);
+		iounmap(info->sram_virt);
+		kfree(info->pool_name);
+	}
 
-	gen_pool_destroy(info->gpool);
-	iounmap(info->sram_virt);
-	kfree(info->pool_name);
 	kfree(info);
+
 	return 0;
 }
 
diff --git a/arch/arm/mach-mstar/Kconfig b/arch/arm/mach-mstar/Kconfig
index cd300eeedc20..5dbea7b485af 100644
--- a/arch/arm/mach-mstar/Kconfig
+++ b/arch/arm/mach-mstar/Kconfig
@@ -1,8 +1,10 @@
 menuconfig ARCH_MSTARV7
 	bool "MStar/Sigmastar Armv7 SoC Support"
 	depends on ARCH_MULTI_V7
+	select ARM_ERRATA_814220
 	select ARM_GIC
 	select ARM_HEAVY_MB
+	select HAVE_ARM_ARCH_TIMER
 	select MST_IRQ
 	select MSTAR_MSC313_MPLL
 	help
diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c
index 788569e960e1..0b5f055ca1c3 100644
--- a/arch/arm/mach-mv78xx0/irq.c
+++ b/arch/arm/mach-mv78xx0/irq.c
@@ -67,7 +67,6 @@ void __init mv78xx0_init_irq(void)
 	 * registers for core #1 are at an offset of 0x18 from those of
 	 * core #0.)
 	 */
-	orion_gpio_init(NULL, 0, 32, GPIO_VIRT_BASE,
-			mv78xx0_core_index() ? 0x18 : 0,
+	orion_gpio_init(0, 32, GPIO_VIRT_BASE, mv78xx0_core_index() ? 0x18 : 0,
 			IRQ_MV78XX0_GPIO_START, gpio0_irqs);
 }
diff --git a/arch/arm/mach-nspire/Kconfig b/arch/arm/mach-nspire/Kconfig
index b3d161e8e2fb..6ef1b167619b 100644
--- a/arch/arm/mach-nspire/Kconfig
+++ b/arch/arm/mach-nspire/Kconfig
@@ -2,7 +2,6 @@
 config ARCH_NSPIRE
 	bool "TI-NSPIRE based"
 	depends on ARCH_MULTI_V4_V5
-	depends on MMU
 	select CPU_ARM926T
 	select GENERIC_IRQ_CHIP
 	select ARM_AMBA
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index 6daaa645ae5d..21413a9b7b6c 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -263,9 +263,9 @@ static int __init omapdss_init_of(void)
 	}
 
 	r = of_platform_populate(node, NULL, NULL, &pdev->dev);
+	put_device(&pdev->dev);
 	if (r) {
 		pr_err("Unable to populate DSS submodule devices\n");
-		put_device(&pdev->dev);
 		return r;
 	}
 
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index ccb0e3732c0d..31d1a21f6041 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -752,8 +752,10 @@ static int __init _init_clkctrl_providers(void)
 
 	for_each_matching_node(np, ti_clkctrl_match_table) {
 		ret = _setup_clkctrl_provider(np);
-		if (ret)
+		if (ret) {
+			of_node_put(np);
 			break;
+		}
 	}
 
 	return ret;
diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
index e94a61901ffd..c77f3b4e287b 100644
--- a/arch/arm/mach-orion5x/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only
 menuconfig ARCH_ORION5X
 	bool "Marvell Orion"
-	depends on MMU && ARCH_MULTI_V5
+	depends on ARCH_MULTI_V5
 	select CPU_FEROCEON
 	select GPIOLIB
 	select MVEBU_MBUS
diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c
index ac4af2283bef..1ae775d02d90 100644
--- a/arch/arm/mach-orion5x/irq.c
+++ b/arch/arm/mach-orion5x/irq.c
@@ -49,6 +49,6 @@ void __init orion5x_init_irq(void)
 	/*
 	 * Initialize gpiolib for GPIOs 0-31.
 	 */
-	orion_gpio_init(NULL, 0, 32, GPIO_VIRT_BASE, 0,
+	orion_gpio_init(0, 32, GPIO_VIRT_BASE, 0,
 			IRQ_ORION5X_GPIO_START, gpio0_irqs);
 }
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index f7520a6cc7d4..57f0be4065c1 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -153,16 +153,6 @@ config GUMSTIX_AM300EPD
 
 endchoice
 
-config MACH_INTELMOTE2
-	bool "Intel Mote 2 Platform"
-	select IWMMXT
-	select PXA27x
-
-config MACH_STARGATE2
-	bool "Intel Stargate 2 Platform"
-	select IWMMXT
-	select PXA27x
-
 config MACH_XCEP
 	bool "Iskratel Electronics XCEP"
 	select MTD
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 177abe584dd5..68730ceb8b7c 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -45,8 +45,6 @@ obj-$(CONFIG_MACH_CAPC7117)     += capc7117.o mxm8x10.o
 obj-$(CONFIG_ARCH_GUMSTIX)	+= gumstix.o
 obj-$(CONFIG_GUMSTIX_AM200EPD)	+= am200epd.o
 obj-$(CONFIG_GUMSTIX_AM300EPD)	+= am300epd.o
-obj-$(CONFIG_MACH_INTELMOTE2)	+= stargate2.o
-obj-$(CONFIG_MACH_STARGATE2)	+= stargate2.o
 obj-$(CONFIG_MACH_XCEP)         += xcep.o
 obj-$(CONFIG_MACH_TRIZEPS4)	+= trizeps4.o
 obj-$(CONFIG_MACH_LOGICPD_PXA270)	+= lpd270.o
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 593c7f793da5..44659fbc37ba 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -530,6 +530,16 @@ static struct pxa2xx_spi_controller corgi_spi_info = {
 	.num_chipselect	= 3,
 };
 
+static struct gpiod_lookup_table corgi_spi_gpio_table = {
+	.dev_id = "pxa2xx-spi.1",
+	.table = {
+		GPIO_LOOKUP_IDX("gpio-pxa", CORGI_GPIO_ADS7846_CS, "cs", 0, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("gpio-pxa", CORGI_GPIO_LCDCON_CS, "cs", 1, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("gpio-pxa", CORGI_GPIO_MAX1111_CS, "cs", 2, GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 static void corgi_wait_for_hsync(void)
 {
 	while (gpio_get_value(CORGI_GPIO_HSYNC))
@@ -548,10 +558,6 @@ static struct ads7846_platform_data corgi_ads7846_info = {
 	.wait_for_sync		= corgi_wait_for_hsync,
 };
 
-static struct pxa2xx_spi_chip corgi_ads7846_chip = {
-	.gpio_cs	= CORGI_GPIO_ADS7846_CS,
-};
-
 static void corgi_bl_kick_battery(void)
 {
 	void (*kick_batt)(void);
@@ -580,14 +586,6 @@ static struct corgi_lcd_platform_data corgi_lcdcon_info = {
 	.kick_battery		= corgi_bl_kick_battery,
 };
 
-static struct pxa2xx_spi_chip corgi_lcdcon_chip = {
-	.gpio_cs	= CORGI_GPIO_LCDCON_CS,
-};
-
-static struct pxa2xx_spi_chip corgi_max1111_chip = {
-	.gpio_cs	= CORGI_GPIO_MAX1111_CS,
-};
-
 static struct spi_board_info corgi_spi_devices[] = {
 	{
 		.modalias	= "ads7846",
@@ -595,7 +593,6 @@ static struct spi_board_info corgi_spi_devices[] = {
 		.bus_num	= 1,
 		.chip_select	= 0,
 		.platform_data	= &corgi_ads7846_info,
-		.controller_data= &corgi_ads7846_chip,
 		.irq		= PXA_GPIO_TO_IRQ(CORGI_GPIO_TP_INT),
 	}, {
 		.modalias	= "corgi-lcd",
@@ -603,18 +600,17 @@ static struct spi_board_info corgi_spi_devices[] = {
 		.bus_num	= 1,
 		.chip_select	= 1,
 		.platform_data	= &corgi_lcdcon_info,
-		.controller_data= &corgi_lcdcon_chip,
 	}, {
 		.modalias	= "max1111",
 		.max_speed_hz	= 450000,
 		.bus_num	= 1,
 		.chip_select	= 2,
-		.controller_data= &corgi_max1111_chip,
 	},
 };
 
 static void __init corgi_init_spi(void)
 {
+	gpiod_add_lookup_table(&corgi_spi_gpio_table);
 	pxa2xx_set_spi_info(1, &corgi_spi_info);
 	gpiod_add_lookup_table(&corgi_lcdcon_gpio_table);
 	spi_register_board_info(ARRAY_AND_SIZE(corgi_spi_devices));
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index 1d4c5db54be2..e1870fbb19e7 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -616,7 +616,6 @@ static struct pxa2xx_spi_chip tsc2046_chip = {
 	.tx_threshold = 1,
 	.rx_threshold = 2,
 	.timeout      = 64,
-	.gpio_cs      = GPIO88_HX4700_TSC2046_CS,
 };
 
 static struct spi_board_info tsc2046_board_info[] __initdata = {
@@ -635,6 +634,14 @@ static struct pxa2xx_spi_controller pxa_ssp2_master_info = {
 	.enable_dma     = 1,
 };
 
+static struct gpiod_lookup_table pxa_ssp2_gpio_table = {
+	.dev_id = "pxa2xx-spi.2",
+	.table = {
+		GPIO_LOOKUP_IDX("gpio-pxa", GPIO88_HX4700_TSC2046_CS, "cs", 0, GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 /*
  * External power
  */
@@ -896,6 +903,7 @@ static void __init hx4700_init(void)
 	pxa_set_i2c_info(NULL);
 	i2c_register_board_info(0, ARRAY_AND_SIZE(i2c_board_info));
 	i2c_register_board_info(1, ARRAY_AND_SIZE(pi2c_board_info));
+	gpiod_add_lookup_table(&pxa_ssp2_gpio_table);
 	pxa2xx_set_spi_info(2, &pxa_ssp2_master_info);
 	spi_register_board_info(ARRAY_AND_SIZE(tsc2046_board_info));
 
diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c
index 04a12523cdee..753fe166ab68 100644
--- a/arch/arm/mach-pxa/icontrol.c
+++ b/arch/arm/mach-pxa/icontrol.c
@@ -13,7 +13,7 @@
 #include <linux/irq.h>
 #include <linux/platform_device.h>
 #include <linux/property.h>
-#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -42,7 +42,6 @@ static struct pxa2xx_spi_chip mcp251x_chip_info1 = {
 	.rx_threshold   = 128,
 	.dma_burst_size = 8,
 	.timeout        = 235,
-	.gpio_cs        = ICONTROL_MCP251x_nCS1
 };
 
 static struct pxa2xx_spi_chip mcp251x_chip_info2 = {
@@ -50,7 +49,6 @@ static struct pxa2xx_spi_chip mcp251x_chip_info2 = {
 	.rx_threshold   = 128,
 	.dma_burst_size = 8,
 	.timeout        = 235,
-	.gpio_cs        = ICONTROL_MCP251x_nCS2
 };
 
 static struct pxa2xx_spi_chip mcp251x_chip_info3 = {
@@ -58,7 +56,6 @@ static struct pxa2xx_spi_chip mcp251x_chip_info3 = {
 	.rx_threshold   = 128,
 	.dma_burst_size = 8,
 	.timeout        = 235,
-	.gpio_cs        = ICONTROL_MCP251x_nCS3
 };
 
 static struct pxa2xx_spi_chip mcp251x_chip_info4 = {
@@ -66,7 +63,6 @@ static struct pxa2xx_spi_chip mcp251x_chip_info4 = {
 	.rx_threshold   = 128,
 	.dma_burst_size = 8,
 	.timeout        = 235,
-	.gpio_cs        = ICONTROL_MCP251x_nCS4
 };
 
 static const struct property_entry mcp251x_properties[] = {
@@ -143,6 +139,24 @@ struct platform_device pxa_spi_ssp4 = {
 	}
 };
 
+static struct gpiod_lookup_table pxa_ssp3_gpio_table = {
+	.dev_id = "pxa2xx-spi.3",
+	.table = {
+		GPIO_LOOKUP_IDX("gpio-pxa", ICONTROL_MCP251x_nCS1, "cs", 0, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("gpio-pxa", ICONTROL_MCP251x_nCS2, "cs", 1, GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table pxa_ssp4_gpio_table = {
+	.dev_id = "pxa2xx-spi.4",
+	.table = {
+		GPIO_LOOKUP_IDX("gpio-pxa", ICONTROL_MCP251x_nCS3, "cs", 0, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("gpio-pxa", ICONTROL_MCP251x_nCS4, "cs", 1, GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 static struct platform_device *icontrol_spi_devices[] __initdata = {
 	&pxa_spi_ssp3,
 	&pxa_spi_ssp4,
@@ -175,6 +189,8 @@ static mfp_cfg_t mfp_can_cfg[] __initdata = {
 static void __init icontrol_can_init(void)
 {
 	pxa3xx_mfp_config(ARRAY_AND_SIZE(mfp_can_cfg));
+	gpiod_add_lookup_table(&pxa_ssp3_gpio_table);
+	gpiod_add_lookup_table(&pxa_ssp4_gpio_table);
 	platform_add_devices(ARRAY_AND_SIZE(icontrol_spi_devices));
 	spi_register_board_info(ARRAY_AND_SIZE(mcp251x_board_info));
 }
diff --git a/arch/arm/mach-pxa/include/mach/uncompress.h b/arch/arm/mach-pxa/include/mach/uncompress.h
index c36306064eee..1ed629e38ce6 100644
--- a/arch/arm/mach-pxa/include/mach/uncompress.h
+++ b/arch/arm/mach-pxa/include/mach/uncompress.h
@@ -58,9 +58,8 @@ static inline void arch_decomp_setup(void)
 	uart_shift = 2;
 	uart_is_pxa = 1;
 
-	if (machine_is_littleton() || machine_is_intelmote2()
-	    || machine_is_csb726() || machine_is_stargate2()
-	    || machine_is_cm_x300() || machine_is_balloon3())
+	if (machine_is_littleton() ||  machine_is_csb726() ||
+	    machine_is_cm_x300() || machine_is_balloon3())
 		uart_base = STUART_BASE;
 
 	if (machine_is_arcom_zeus()) {
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 793f61375ee8..73f5953b3bb6 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -195,7 +195,6 @@ static struct pxa2xx_spi_controller littleton_spi_info = {
 static struct pxa2xx_spi_chip littleton_tdo24m_chip = {
 	.rx_threshold	= 1,
 	.tx_threshold	= 1,
-	.gpio_cs	= LITTLETON_GPIO_LCD_CS,
 };
 
 static struct spi_board_info littleton_spi_devices[] __initdata = {
@@ -208,8 +207,17 @@ static struct spi_board_info littleton_spi_devices[] __initdata = {
 	},
 };
 
+static struct gpiod_lookup_table littleton_spi_gpio_table = {
+	.dev_id = "pxa2xx-spi.2",
+	.table = {
+		GPIO_LOOKUP_IDX("gpio-pxa", LITTLETON_GPIO_LCD_CS, "cs", 0, GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 static void __init littleton_init_spi(void)
 {
+	gpiod_add_lookup_table(&littleton_spi_gpio_table);
 	pxa2xx_set_spi_info(2, &littleton_spi_info);
 	spi_register_board_info(ARRAY_AND_SIZE(littleton_spi_devices));
 }
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index cd9fa465b9b2..200fd35168e0 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -938,8 +938,6 @@ struct pxa2xx_spi_chip tsc2046_chip_info = {
 	.tx_threshold	= 1,
 	.rx_threshold	= 2,
 	.timeout	= 64,
-	/* NOTICE must be GPIO, incompatibility with hw PXA SPI framing */
-	.gpio_cs	= GPIO14_MAGICIAN_TSC2046_CS,
 };
 
 static struct pxa2xx_spi_controller magician_spi_info = {
@@ -947,6 +945,15 @@ static struct pxa2xx_spi_controller magician_spi_info = {
 	.enable_dma	= 1,
 };
 
+static struct gpiod_lookup_table magician_spi_gpio_table = {
+	.dev_id = "pxa2xx-spi.2",
+	.table = {
+		/* NOTICE must be GPIO, incompatibility with hw PXA SPI framing */
+		GPIO_LOOKUP_IDX("gpio-pxa", GPIO14_MAGICIAN_TSC2046_CS, "cs", 0, GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 static struct spi_board_info ads7846_spi_board_info[] __initdata = {
 	{
 		.modalias		= "ads7846",
@@ -1031,6 +1038,7 @@ static void __init magician_init(void)
 	} else
 		pr_err("LCD detection: CPLD mapping failed\n");
 
+	gpiod_add_lookup_table(&magician_spi_gpio_table);
 	pxa2xx_set_spi_info(2, &magician_spi_info);
 	spi_register_board_info(ARRAY_AND_SIZE(ads7846_spi_board_info));
 
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 3a4ecc3c8f8b..58cfa434afde 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -197,6 +197,14 @@ static struct pxa2xx_spi_controller poodle_spi_info = {
 	.num_chipselect	= 1,
 };
 
+static struct gpiod_lookup_table poodle_spi_gpio_table = {
+	.dev_id = "pxa2xx-spi.1",
+	.table = {
+		GPIO_LOOKUP_IDX("gpio-pxa", POODLE_GPIO_TP_CS, "cs", 0, GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 static struct ads7846_platform_data poodle_ads7846_info = {
 	.model			= 7846,
 	.vref_delay_usecs	= 100,
@@ -205,23 +213,19 @@ static struct ads7846_platform_data poodle_ads7846_info = {
 	.gpio_pendown		= POODLE_GPIO_TP_INT,
 };
 
-static struct pxa2xx_spi_chip poodle_ads7846_chip = {
-	.gpio_cs		= POODLE_GPIO_TP_CS,
-};
-
 static struct spi_board_info poodle_spi_devices[] = {
 	{
 		.modalias	= "ads7846",
 		.max_speed_hz	= 10000,
 		.bus_num	= 1,
 		.platform_data	= &poodle_ads7846_info,
-		.controller_data= &poodle_ads7846_chip,
 		.irq		= PXA_GPIO_TO_IRQ(POODLE_GPIO_TP_INT),
 	},
 };
 
 static void __init poodle_init_spi(void)
 {
+	gpiod_add_lookup_table(&poodle_spi_gpio_table);
 	pxa2xx_set_spi_info(1, &poodle_spi_info);
 	spi_register_board_info(ARRAY_AND_SIZE(poodle_spi_devices));
 }
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 371008e9bb02..a648e7094e84 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -510,10 +510,6 @@ static struct ads7846_platform_data spitz_ads7846_info = {
 	.wait_for_sync		= spitz_ads7846_wait_for_hsync,
 };
 
-static struct pxa2xx_spi_chip spitz_ads7846_chip = {
-	.gpio_cs		= SPITZ_GPIO_ADS7846_CS,
-};
-
 static void spitz_bl_kick_battery(void)
 {
 	void (*kick_batt)(void);
@@ -555,14 +551,6 @@ static struct corgi_lcd_platform_data spitz_lcdcon_info = {
 	.kick_battery		= spitz_bl_kick_battery,
 };
 
-static struct pxa2xx_spi_chip spitz_lcdcon_chip = {
-	.gpio_cs	= SPITZ_GPIO_LCDCON_CS,
-};
-
-static struct pxa2xx_spi_chip spitz_max1111_chip = {
-	.gpio_cs	= SPITZ_GPIO_MAX1111_CS,
-};
-
 static struct spi_board_info spitz_spi_devices[] = {
 	{
 		.modalias		= "ads7846",
@@ -570,7 +558,6 @@ static struct spi_board_info spitz_spi_devices[] = {
 		.bus_num		= 2,
 		.chip_select		= 0,
 		.platform_data		= &spitz_ads7846_info,
-		.controller_data	= &spitz_ads7846_chip,
 		.irq			= PXA_GPIO_TO_IRQ(SPITZ_GPIO_TP_INT),
 	}, {
 		.modalias		= "corgi-lcd",
@@ -578,13 +565,11 @@ static struct spi_board_info spitz_spi_devices[] = {
 		.bus_num		= 2,
 		.chip_select		= 1,
 		.platform_data		= &spitz_lcdcon_info,
-		.controller_data	= &spitz_lcdcon_chip,
 	}, {
 		.modalias		= "max1111",
 		.max_speed_hz		= 450000,
 		.bus_num		= 2,
 		.chip_select		= 2,
-		.controller_data	= &spitz_max1111_chip,
 	},
 };
 
@@ -592,6 +577,16 @@ static struct pxa2xx_spi_controller spitz_spi_info = {
 	.num_chipselect	= 3,
 };
 
+static struct gpiod_lookup_table spitz_spi_gpio_table = {
+	.dev_id = "pxa2xx-spi.2",
+	.table = {
+		GPIO_LOOKUP_IDX("gpio-pxa", SPITZ_GPIO_ADS7846_CS, "cs", 0, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("gpio-pxa", SPITZ_GPIO_LCDCON_CS, "cs", 1, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("gpio-pxa", SPITZ_GPIO_MAX1111_CS, "cs", 2, GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 static void __init spitz_spi_init(void)
 {
 	if (machine_is_akita())
@@ -599,6 +594,7 @@ static void __init spitz_spi_init(void)
 	else
 		gpiod_add_lookup_table(&spitz_lcdcon_gpio_table);
 
+	gpiod_add_lookup_table(&spitz_spi_gpio_table);
 	pxa2xx_set_spi_info(2, &spitz_spi_info);
 	spi_register_board_info(ARRAY_AND_SIZE(spitz_spi_devices));
 }
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
deleted file mode 100644
index 8ca02ec1d44c..000000000000
--- a/arch/arm/mach-pxa/stargate2.c
+++ /dev/null
@@ -1,1030 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- *  linux/arch/arm/mach-pxa/stargate2.c
- *
- *  Author:	Ed C. Epp
- *  Created:	Nov 05, 2002
- *  Copyright:	Intel Corp.
- *
- *  Modified 2009:  Jonathan Cameron <jic23@cam.ac.uk>
- */
-
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include <linux/bitops.h>
-#include <linux/fb.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/machine.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/mtd/partitions.h>
-
-#include <linux/platform_data/i2c-pxa.h>
-#include <linux/platform_data/pcf857x.h>
-#include <linux/smc91x.h>
-#include <linux/gpio/machine.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/property.h>
-
-#include <asm/types.h>
-#include <asm/setup.h>
-#include <asm/memory.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/flash.h>
-
-#include "pxa27x.h"
-#include <linux/platform_data/mmc-pxamci.h>
-#include "udc.h"
-#include "pxa27x-udc.h"
-#include <mach/smemc.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/pxa2xx_spi.h>
-#include <linux/mfd/da903x.h>
-
-#include "devices.h"
-#include "generic.h"
-
-#define STARGATE_NR_IRQS	(IRQ_BOARD_START + 8)
-
-/* Bluetooth */
-#define SG2_BT_RESET		81
-
-/* SD */
-#define SG2_GPIO_nSD_DETECT	90
-#define SG2_SD_POWER_ENABLE	89
-
-static unsigned long sg2_im2_unified_pin_config[] __initdata = {
-	/* Device Identification for wakeup*/
-	GPIO102_GPIO,
-	/* DA9030 */
-	GPIO1_GPIO,
-
-	/* MMC */
-	GPIO32_MMC_CLK,
-	GPIO112_MMC_CMD,
-	GPIO92_MMC_DAT_0,
-	GPIO109_MMC_DAT_1,
-	GPIO110_MMC_DAT_2,
-	GPIO111_MMC_DAT_3,
-
-	/* 802.15.4 radio - driver out of mainline */
-	GPIO22_GPIO,			/* CC_RSTN */
-	GPIO114_GPIO,			/* CC_FIFO */
-	GPIO116_GPIO,			/* CC_CCA */
-	GPIO0_GPIO,			/* CC_FIFOP */
-	GPIO16_GPIO,			/* CCSFD */
-	GPIO115_GPIO,			/* Power enable */
-
-	/* I2C */
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-
-	/* SSP 3 - 802.15.4 radio */
-	GPIO39_GPIO,			/* Chip Select */
-	GPIO34_SSP3_SCLK,
-	GPIO35_SSP3_TXD,
-	GPIO41_SSP3_RXD,
-
-	/* SSP 2 to daughter boards */
-	GPIO11_SSP2_RXD,
-	GPIO38_SSP2_TXD,
-	GPIO36_SSP2_SCLK,
-	GPIO37_GPIO, /* chip select */
-
-	/* SSP 1 - to daughter boards */
-	GPIO24_GPIO,			/* Chip Select */
-	GPIO23_SSP1_SCLK,
-	GPIO25_SSP1_TXD,
-	GPIO26_SSP1_RXD,
-
-	/* BTUART Basic Connector*/
-	GPIO42_BTUART_RXD,
-	GPIO43_BTUART_TXD,
-	GPIO44_BTUART_CTS,
-	GPIO45_BTUART_RTS,
-
-	/* STUART  - IM2 via debug board not sure on SG2*/
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
-
-	/* Basic sensor board */
-	GPIO96_GPIO,	/* accelerometer interrupt */
-	GPIO99_GPIO,	/* ADC interrupt */
-
-	/* SHT15 */
-	GPIO100_GPIO,
-	GPIO98_GPIO,
-
-	/* Basic sensor board */
-	GPIO96_GPIO,	/* accelerometer interrupt */
-	GPIO99_GPIO,	/* ADC interrupt */
-
-	/* Connector pins specified as gpios */
-	GPIO94_GPIO, /* large basic connector pin 14 */
-	GPIO10_GPIO, /* large basic connector pin 23 */
-};
-
-static struct gpiod_lookup_table sht15_gpiod_table = {
-	.dev_id = "sht15",
-	.table = {
-		/* FIXME: should this have |GPIO_OPEN_DRAIN set? */
-		GPIO_LOOKUP("gpio-pxa", 100, "data", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-pxa", 98, "clk", GPIO_ACTIVE_HIGH),
-	},
-};
-
-static struct platform_device sht15 = {
-	.name = "sht15",
-	.id = -1,
-};
-
-static struct regulator_consumer_supply stargate2_sensor_3_con[] = {
-	REGULATOR_SUPPLY("vcc", "sht15"),
-};
-
-enum stargate2_ldos{
-	vcc_vref,
-	vcc_cc2420,
-	/* a mote connector? */
-	vcc_mica,
-	/* the CSR bluecore chip */
-	vcc_bt,
-	/* The two voltages available to sensor boards */
-	vcc_sensor_1_8,
-	vcc_sensor_3,
-	/* directly connected to the pxa27x */
-	vcc_sram_ext,
-	vcc_pxa_pll,
-	vcc_pxa_usim, /* Reference voltage for certain gpios */
-	vcc_pxa_mem,
-	vcc_pxa_flash,
-	vcc_pxa_core, /*Dc-Dc buck not yet supported */
-	vcc_lcd,
-	vcc_bb,
-	vcc_bbio, /*not sure!*/
-	vcc_io, /* cc2420 802.15.4 radio and pxa vcc_io ?*/
-};
-
-/* The values of the various regulator constraints are obviously dependent
- * on exactly what is wired to each ldo.  Unfortunately this information is
- * not generally available.  More information has been requested from Xbow.
- */
-static struct regulator_init_data stargate2_ldo_init_data[] = {
-	[vcc_bbio] = {
-		.constraints = { /* board default 1.8V */
-			.name = "vcc_bbio",
-			.min_uV = 1800000,
-			.max_uV = 1800000,
-		},
-	},
-	[vcc_bb] = {
-		.constraints = { /* board default 2.8V */
-			.name = "vcc_bb",
-			.min_uV = 2700000,
-			.max_uV = 3000000,
-		},
-	},
-	[vcc_pxa_flash] = {
-		.constraints = {/* default is 1.8V */
-			.name = "vcc_pxa_flash",
-			.min_uV = 1800000,
-			.max_uV = 1800000,
-		},
-	},
-	[vcc_cc2420] = { /* also vcc_io */
-		.constraints = {
-			/* board default is 2.8V */
-			.name = "vcc_cc2420",
-			.min_uV = 2700000,
-			.max_uV = 3300000,
-		},
-	},
-	[vcc_vref] = { /* Reference for what? */
-		.constraints = { /* default 1.8V */
-			.name = "vcc_vref",
-			.min_uV = 1800000,
-			.max_uV = 1800000,
-		},
-	},
-	[vcc_sram_ext] = {
-		.constraints = { /* default 2.8V */
-			.name = "vcc_sram_ext",
-			.min_uV = 2800000,
-			.max_uV = 2800000,
-		},
-	},
-	[vcc_mica] = {
-		.constraints = { /* default 2.8V */
-			.name = "vcc_mica",
-			.min_uV = 2800000,
-			.max_uV = 2800000,
-		},
-	},
-	[vcc_bt] = {
-		.constraints = { /* default 2.8V */
-			.name = "vcc_bt",
-			.min_uV = 2800000,
-			.max_uV = 2800000,
-		},
-	},
-	[vcc_lcd] = {
-		.constraints = { /* default 2.8V */
-			.name = "vcc_lcd",
-			.min_uV = 2700000,
-			.max_uV = 3300000,
-		},
-	},
-	[vcc_io] = { /* Same or higher than everything
-			  * bar vccbat and vccusb */
-		.constraints = { /* default 2.8V */
-			.name = "vcc_io",
-			.min_uV = 2692000,
-			.max_uV = 3300000,
-		},
-	},
-	[vcc_sensor_1_8] = {
-		.constraints = { /* default 1.8V */
-			.name = "vcc_sensor_1_8",
-			.min_uV = 1800000,
-			.max_uV = 1800000,
-		},
-	},
-	[vcc_sensor_3] = { /* curiously default 2.8V */
-		.constraints = {
-			.name = "vcc_sensor_3",
-			.min_uV = 2800000,
-			.max_uV = 3000000,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(stargate2_sensor_3_con),
-		.consumer_supplies = stargate2_sensor_3_con,
-	},
-	[vcc_pxa_pll] = { /* 1.17V - 1.43V, default 1.3V*/
-		.constraints = {
-			.name = "vcc_pxa_pll",
-			.min_uV = 1170000,
-			.max_uV = 1430000,
-		},
-	},
-	[vcc_pxa_usim] = {
-		.constraints = { /* default 1.8V */
-			.name = "vcc_pxa_usim",
-			.min_uV = 1710000,
-			.max_uV = 2160000,
-		},
-	},
-	[vcc_pxa_mem] = {
-		.constraints = { /* default 1.8V */
-			.name = "vcc_pxa_mem",
-			.min_uV = 1800000,
-			.max_uV = 1800000,
-		},
-	},
-};
-
-static struct mtd_partition stargate2flash_partitions[] = {
-	{
-		.name = "Bootloader",
-		.size = 0x00040000,
-		.offset = 0,
-		.mask_flags = 0,
-	}, {
-		.name = "Kernel",
-		.size = 0x00200000,
-		.offset = 0x00040000,
-		.mask_flags = 0
-	}, {
-		.name = "Filesystem",
-		.size = 0x01DC0000,
-		.offset = 0x00240000,
-		.mask_flags = 0
-	},
-};
-
-static struct resource flash_resources = {
-	.start = PXA_CS0_PHYS,
-	.end = PXA_CS0_PHYS + SZ_32M - 1,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct flash_platform_data stargate2_flash_data = {
-	.map_name = "cfi_probe",
-	.parts = stargate2flash_partitions,
-	.nr_parts = ARRAY_SIZE(stargate2flash_partitions),
-	.name = "PXA27xOnChipROM",
-	.width = 2,
-};
-
-static struct platform_device stargate2_flash_device = {
-	.name = "pxa2xx-flash",
-	.id = 0,
-	.dev = {
-		.platform_data = &stargate2_flash_data,
-	},
-	.resource = &flash_resources,
-	.num_resources = 1,
-};
-
-static struct pxa2xx_spi_controller pxa_ssp_master_0_info = {
-	.num_chipselect = 1,
-};
-
-static struct pxa2xx_spi_controller pxa_ssp_master_1_info = {
-	.num_chipselect = 1,
-};
-
-static struct pxa2xx_spi_controller pxa_ssp_master_2_info = {
-	.num_chipselect = 1,
-};
-
-/* An upcoming kernel change will scrap SFRM usage so these
- * drivers have been moved to use GPIOs */
-static struct pxa2xx_spi_chip staccel_chip_info = {
-	.tx_threshold = 8,
-	.rx_threshold = 8,
-	.dma_burst_size = 8,
-	.timeout = 235,
-	.gpio_cs = 24,
-};
-
-static struct pxa2xx_spi_chip cc2420_info = {
-	.tx_threshold = 8,
-	.rx_threshold = 8,
-	.dma_burst_size = 8,
-	.timeout = 235,
-	.gpio_cs = 39,
-};
-
-static struct spi_board_info spi_board_info[] __initdata = {
-	{
-		.modalias = "lis3l02dq",
-		.max_speed_hz = 8000000,/* 8MHz max spi frequency at 3V */
-		.bus_num = 1,
-		.chip_select = 0,
-		.controller_data = &staccel_chip_info,
-		.irq = PXA_GPIO_TO_IRQ(96),
-	}, {
-		.modalias = "cc2420",
-		.max_speed_hz = 6500000,
-		.bus_num = 3,
-		.chip_select = 0,
-		.controller_data = &cc2420_info,
-	},
-};
-
-static void sg2_udc_command(int cmd)
-{
-	switch (cmd) {
-	case PXA2XX_UDC_CMD_CONNECT:
-		UP2OCR |=  UP2OCR_HXOE  | UP2OCR_DPPUE | UP2OCR_DPPUBE;
-		break;
-	case PXA2XX_UDC_CMD_DISCONNECT:
-		UP2OCR &= ~(UP2OCR_HXOE  | UP2OCR_DPPUE | UP2OCR_DPPUBE);
-		break;
-	}
-}
-
-static struct i2c_pxa_platform_data i2c_pwr_pdata = {
-	.fast_mode = 1,
-};
-
-static struct i2c_pxa_platform_data i2c_pdata = {
-	.fast_mode = 1,
-};
-
-static void __init imote2_stargate2_init(void)
-{
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(sg2_im2_unified_pin_config));
-
-	pxa_set_ffuart_info(NULL);
-	pxa_set_btuart_info(NULL);
-	pxa_set_stuart_info(NULL);
-
-	pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info);
-	pxa2xx_set_spi_info(2, &pxa_ssp_master_1_info);
-	pxa2xx_set_spi_info(3, &pxa_ssp_master_2_info);
-	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-
-
-	pxa27x_set_i2c_power_info(&i2c_pwr_pdata);
-	pxa_set_i2c_info(&i2c_pdata);
-}
-
-#ifdef CONFIG_MACH_INTELMOTE2
-/* As the the imote2 doesn't currently have a conventional SD slot
- * there is no option to hotplug cards, making all this rather simple
- */
-static int imote2_mci_get_ro(struct device *dev)
-{
-	return 0;
-}
-
-/* Rather simple case as hotplugging not possible */
-static struct pxamci_platform_data imote2_mci_platform_data = {
-	.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, /* default anyway */
-	.get_ro = imote2_mci_get_ro,
-};
-
-static struct gpio_led imote2_led_pins[] = {
-	{
-		.name       =  "imote2:red",
-		.gpio       = 103,
-		.active_low = 1,
-	}, {
-		.name       = "imote2:green",
-		.gpio       = 104,
-		.active_low = 1,
-	}, {
-		.name       = "imote2:blue",
-		.gpio       = 105,
-		.active_low = 1,
-	},
-};
-
-static struct gpio_led_platform_data imote2_led_data = {
-	.num_leds = ARRAY_SIZE(imote2_led_pins),
-	.leds     = imote2_led_pins,
-};
-
-static struct platform_device imote2_leds = {
-	.name = "leds-gpio",
-	.id   = -1,
-	.dev = {
-		.platform_data = &imote2_led_data,
-	},
-};
-
-static struct da903x_subdev_info imote2_da9030_subdevs[] = {
-	{
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO2,
-		.platform_data = &stargate2_ldo_init_data[vcc_bbio],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO3,
-		.platform_data = &stargate2_ldo_init_data[vcc_bb],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO4,
-		.platform_data = &stargate2_ldo_init_data[vcc_pxa_flash],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO5,
-		.platform_data = &stargate2_ldo_init_data[vcc_cc2420],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO6,
-		.platform_data = &stargate2_ldo_init_data[vcc_vref],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO7,
-		.platform_data = &stargate2_ldo_init_data[vcc_sram_ext],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO8,
-		.platform_data = &stargate2_ldo_init_data[vcc_mica],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO9,
-		.platform_data = &stargate2_ldo_init_data[vcc_bt],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO10,
-		.platform_data = &stargate2_ldo_init_data[vcc_sensor_1_8],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO11,
-		.platform_data = &stargate2_ldo_init_data[vcc_sensor_3],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO12,
-		.platform_data = &stargate2_ldo_init_data[vcc_lcd],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO15,
-		.platform_data = &stargate2_ldo_init_data[vcc_pxa_pll],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO17,
-		.platform_data = &stargate2_ldo_init_data[vcc_pxa_usim],
-	}, {
-		.name = "da903x-regulator", /*pxa vcc i/o and cc2420 vcc i/o */
-		.id = DA9030_ID_LDO18,
-		.platform_data = &stargate2_ldo_init_data[vcc_io],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO19,
-		.platform_data = &stargate2_ldo_init_data[vcc_pxa_mem],
-	},
-};
-
-static struct da903x_platform_data imote2_da9030_pdata = {
-	.num_subdevs = ARRAY_SIZE(imote2_da9030_subdevs),
-	.subdevs = imote2_da9030_subdevs,
-};
-
-static struct i2c_board_info __initdata imote2_pwr_i2c_board_info[] = {
-	{
-		.type = "da9030",
-		.addr = 0x49,
-		.platform_data = &imote2_da9030_pdata,
-		.irq = PXA_GPIO_TO_IRQ(1),
-	},
-};
-
-static struct i2c_board_info __initdata imote2_i2c_board_info[] = {
-	{ /* UCAM sensor board */
-		.type = "max1239",
-		.addr = 0x35,
-	}, { /* ITS400 Sensor board only */
-		.type = "max1363",
-		.addr = 0x34,
-		/* Through a nand gate - Also beware, on V2 sensor board the
-		 * pull up resistors are missing.
-		 */
-		.irq = PXA_GPIO_TO_IRQ(99),
-	}, { /* ITS400 Sensor board only */
-		.type = "tsl2561",
-		.addr = 0x49,
-		/* Through a nand gate - Also beware, on V2 sensor board the
-		 * pull up resistors are missing.
-		 */
-		.irq = PXA_GPIO_TO_IRQ(99),
-	}, { /* ITS400 Sensor board only */
-		.type = "tmp175",
-		.addr = 0x4A,
-		.irq = PXA_GPIO_TO_IRQ(96),
-	}, { /* IMB400 Multimedia board */
-		.type = "wm8940",
-		.addr = 0x1A,
-	},
-};
-
-static unsigned long imote2_pin_config[] __initdata = {
-
-	/* Button */
-	GPIO91_GPIO,
-
-	/* LEDS */
-	GPIO103_GPIO, /* red led */
-	GPIO104_GPIO, /* green led */
-	GPIO105_GPIO, /* blue led */
-};
-
-static struct pxa2xx_udc_mach_info imote2_udc_info __initdata = {
-	.udc_command		= sg2_udc_command,
-};
-
-static struct platform_device imote2_audio_device = {
-	.name = "imote2-audio",
-	.id   = -1,
-};
-
-static struct platform_device *imote2_devices[] = {
-	&stargate2_flash_device,
-	&imote2_leds,
-	&sht15,
-	&imote2_audio_device,
-};
-
-static void __init imote2_init(void)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(imote2_pin_config));
-
-	imote2_stargate2_init();
-
-	gpiod_add_lookup_table(&sht15_gpiod_table);
-	platform_add_devices(imote2_devices, ARRAY_SIZE(imote2_devices));
-
-	i2c_register_board_info(0, imote2_i2c_board_info,
-				ARRAY_SIZE(imote2_i2c_board_info));
-	i2c_register_board_info(1, imote2_pwr_i2c_board_info,
-				ARRAY_SIZE(imote2_pwr_i2c_board_info));
-
-	pxa_set_mci_info(&imote2_mci_platform_data);
-	pxa_set_udc_info(&imote2_udc_info);
-}
-#endif
-
-#ifdef CONFIG_MACH_STARGATE2
-
-static unsigned long stargate2_pin_config[] __initdata = {
-
-	GPIO15_nCS_1, /* SRAM */
-	/* SMC91x */
-	GPIO80_nCS_4,
-	GPIO40_GPIO, /*cable detect?*/
-
-	/* Button */
-	GPIO91_GPIO | WAKEUP_ON_LEVEL_HIGH,
-
-	/* Compact Flash */
-	GPIO79_PSKTSEL,
-	GPIO48_nPOE,
-	GPIO49_nPWE,
-	GPIO50_nPIOR,
-	GPIO51_nPIOW,
-	GPIO85_nPCE_1,
-	GPIO54_nPCE_2,
-	GPIO55_nPREG,
-	GPIO56_nPWAIT,
-	GPIO57_nIOIS16,
-	GPIO120_GPIO, /* Buff ctrl */
-	GPIO108_GPIO, /* Power ctrl */
-	GPIO82_GPIO, /* Reset */
-	GPIO53_GPIO, /* SG2_S0_GPIO_DETECT */
-
-	/* MMC not shared with imote2 */
-	GPIO90_GPIO, /* nSD detect */
-	GPIO89_GPIO, /* SD_POWER_ENABLE */
-
-	/* Bluetooth */
-	GPIO81_GPIO, /* reset */
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.name = "smc91x-regs",
-		.start = (PXA_CS4_PHYS + 0x300),
-		.end = (PXA_CS4_PHYS + 0xfffff),
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = PXA_GPIO_TO_IRQ(40),
-		.end = PXA_GPIO_TO_IRQ(40),
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct smc91x_platdata stargate2_smc91x_info = {
-	.flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT
-	| SMC91X_NOWAIT | SMC91X_USE_DMA,
-	.pxa_u16_align4 = true,
-};
-
-static struct platform_device smc91x_device = {
-	.name = "smc91x",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(smc91x_resources),
-	.resource = smc91x_resources,
-	.dev = {
-		.platform_data = &stargate2_smc91x_info,
-	},
-};
-
-
-/*
- * The card detect interrupt isn't debounced so we delay it by 250ms
- * to give the card a chance to fully insert / eject.
- */
-static int stargate2_mci_init(struct device *dev,
-			      irq_handler_t stargate2_detect_int,
-			      void *data)
-{
-	int err;
-
-	err = gpio_request(SG2_SD_POWER_ENABLE, "SG2_sd_power_enable");
-	if (err) {
-		printk(KERN_ERR "Can't get the gpio for SD power control");
-		goto return_err;
-	}
-	gpio_direction_output(SG2_SD_POWER_ENABLE, 0);
-
-	err = gpio_request(SG2_GPIO_nSD_DETECT, "SG2_sd_detect");
-	if (err) {
-		printk(KERN_ERR "Can't get the sd detect gpio");
-		goto free_power_en;
-	}
-	gpio_direction_input(SG2_GPIO_nSD_DETECT);
-
-	err = request_irq(PXA_GPIO_TO_IRQ(SG2_GPIO_nSD_DETECT),
-			  stargate2_detect_int,
-			  IRQ_TYPE_EDGE_BOTH,
-			  "MMC card detect",
-			  data);
-	if (err) {
-		printk(KERN_ERR "can't request MMC card detect IRQ\n");
-		goto free_nsd_detect;
-	}
-	return 0;
-
- free_nsd_detect:
-	gpio_free(SG2_GPIO_nSD_DETECT);
- free_power_en:
-	gpio_free(SG2_SD_POWER_ENABLE);
- return_err:
-	return err;
-}
-
-/**
- * stargate2_mci_setpower() - set state of mmc power supply
- *
- * Very simple control. Either it is on or off and is controlled by
- * a gpio pin */
-static int stargate2_mci_setpower(struct device *dev, unsigned int vdd)
-{
-	gpio_set_value(SG2_SD_POWER_ENABLE, !!vdd);
-	return 0;
-}
-
-static void stargate2_mci_exit(struct device *dev, void *data)
-{
-	free_irq(PXA_GPIO_TO_IRQ(SG2_GPIO_nSD_DETECT), data);
-	gpio_free(SG2_SD_POWER_ENABLE);
-	gpio_free(SG2_GPIO_nSD_DETECT);
-}
-
-static struct pxamci_platform_data stargate2_mci_platform_data = {
-	.detect_delay_ms = 250,
-	.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
-	.init = stargate2_mci_init,
-	.setpower = stargate2_mci_setpower,
-	.exit = stargate2_mci_exit,
-};
-
-
-/*
- * SRAM - The Stargate 2 has 32MB of SRAM.
- *
- * Here it is made available as an MTD. This will then
- * typically have a cifs filesystem created on it to provide
- * fast temporary storage.
- */
-static struct resource sram_resources = {
-	.start = PXA_CS1_PHYS,
-	.end = PXA_CS1_PHYS + SZ_32M-1,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct platdata_mtd_ram stargate2_sram_pdata = {
-	.mapname = "Stargate2 SRAM",
-	.bankwidth = 2,
-};
-
-static struct platform_device stargate2_sram = {
-	.name = "mtd-ram",
-	.id = 0,
-	.resource = &sram_resources,
-	.num_resources = 1,
-	.dev = {
-		.platform_data = &stargate2_sram_pdata,
-	},
-};
-
-static struct pcf857x_platform_data platform_data_pcf857x = {
-	.gpio_base = 128,
-	.n_latch = 0,
-	.setup = NULL,
-	.teardown = NULL,
-	.context = NULL,
-};
-
-static const struct property_entry pca9500_eeprom_properties[] = {
-	PROPERTY_ENTRY_U32("pagesize", 4),
-	{ }
-};
-
-static const struct software_node pca9500_eeprom_node = {
-	.properties = pca9500_eeprom_properties,
-};
-
-/**
- * stargate2_reset_bluetooth() reset the bluecore to ensure consistent state
- **/
-static int stargate2_reset_bluetooth(void)
-{
-	int err;
-	err = gpio_request(SG2_BT_RESET, "SG2_BT_RESET");
-	if (err) {
-		printk(KERN_ERR "Could not get gpio for bluetooth reset\n");
-		return err;
-	}
-	gpio_direction_output(SG2_BT_RESET, 1);
-	mdelay(5);
-	/* now reset it - 5 msec minimum */
-	gpio_set_value(SG2_BT_RESET, 0);
-	mdelay(10);
-	gpio_set_value(SG2_BT_RESET, 1);
-	gpio_free(SG2_BT_RESET);
-	return 0;
-}
-
-static struct led_info stargate2_leds[] = {
-	{
-		.name = "sg2:red",
-		.flags = DA9030_LED_RATE_ON,
-	}, {
-		.name = "sg2:blue",
-		.flags = DA9030_LED_RATE_ON,
-	}, {
-		.name = "sg2:green",
-		.flags = DA9030_LED_RATE_ON,
-	},
-};
-
-static struct da903x_subdev_info stargate2_da9030_subdevs[] = {
-	{
-		.name = "da903x-led",
-		.id = DA9030_ID_LED_2,
-		.platform_data = &stargate2_leds[0],
-	}, {
-		.name = "da903x-led",
-		.id = DA9030_ID_LED_3,
-		.platform_data = &stargate2_leds[2],
-	}, {
-		.name = "da903x-led",
-		.id = DA9030_ID_LED_4,
-		.platform_data = &stargate2_leds[1],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO2,
-		.platform_data = &stargate2_ldo_init_data[vcc_bbio],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO3,
-		.platform_data = &stargate2_ldo_init_data[vcc_bb],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO4,
-		.platform_data = &stargate2_ldo_init_data[vcc_pxa_flash],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO5,
-		.platform_data = &stargate2_ldo_init_data[vcc_cc2420],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO6,
-		.platform_data = &stargate2_ldo_init_data[vcc_vref],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO7,
-		.platform_data = &stargate2_ldo_init_data[vcc_sram_ext],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO8,
-		.platform_data = &stargate2_ldo_init_data[vcc_mica],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO9,
-		.platform_data = &stargate2_ldo_init_data[vcc_bt],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO10,
-		.platform_data = &stargate2_ldo_init_data[vcc_sensor_1_8],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO11,
-		.platform_data = &stargate2_ldo_init_data[vcc_sensor_3],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO12,
-		.platform_data = &stargate2_ldo_init_data[vcc_lcd],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO15,
-		.platform_data = &stargate2_ldo_init_data[vcc_pxa_pll],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO17,
-		.platform_data = &stargate2_ldo_init_data[vcc_pxa_usim],
-	}, {
-		.name = "da903x-regulator", /*pxa vcc i/o and cc2420 vcc i/o */
-		.id = DA9030_ID_LDO18,
-		.platform_data = &stargate2_ldo_init_data[vcc_io],
-	}, {
-		.name = "da903x-regulator",
-		.id = DA9030_ID_LDO19,
-		.platform_data = &stargate2_ldo_init_data[vcc_pxa_mem],
-	},
-};
-
-static struct da903x_platform_data stargate2_da9030_pdata = {
-	.num_subdevs = ARRAY_SIZE(stargate2_da9030_subdevs),
-	.subdevs = stargate2_da9030_subdevs,
-};
-
-static struct i2c_board_info __initdata stargate2_pwr_i2c_board_info[] = {
-	{
-		.type = "da9030",
-		.addr = 0x49,
-		.platform_data = &stargate2_da9030_pdata,
-		.irq = PXA_GPIO_TO_IRQ(1),
-	},
-};
-
-static struct i2c_board_info __initdata stargate2_i2c_board_info[] = {
-	/* Techically this a pca9500 - but it's compatible with the 8574
-	 * for gpio expansion and the 24c02 for eeprom access.
-	 */
-	{
-		.type = "pcf8574",
-		.addr =  0x27,
-		.platform_data = &platform_data_pcf857x,
-	}, {
-		.type = "24c02",
-		.addr = 0x57,
-		.swnode = &pca9500_eeprom_node,
-	}, {
-		.type = "max1238",
-		.addr = 0x35,
-	}, { /* ITS400 Sensor board only */
-		.type = "max1363",
-		.addr = 0x34,
-		/* Through a nand gate - Also beware, on V2 sensor board the
-		 * pull up resistors are missing.
-		 */
-		.irq = PXA_GPIO_TO_IRQ(99),
-	}, { /* ITS400 Sensor board only */
-		.type = "tsl2561",
-		.addr = 0x49,
-		/* Through a nand gate - Also beware, on V2 sensor board the
-		 * pull up resistors are missing.
-		 */
-		.irq = PXA_GPIO_TO_IRQ(99),
-	}, { /* ITS400 Sensor board only */
-		.type = "tmp175",
-		.addr = 0x4A,
-		.irq = PXA_GPIO_TO_IRQ(96),
-	},
-};
-
-/* Board doesn't support cable detection - so always lie and say
- * something is there.
- */
-static int sg2_udc_detect(void)
-{
-	return 1;
-}
-
-static struct pxa2xx_udc_mach_info stargate2_udc_info __initdata = {
-	.udc_is_connected	= sg2_udc_detect,
-	.udc_command		= sg2_udc_command,
-};
-
-static struct platform_device *stargate2_devices[] = {
-	&stargate2_flash_device,
-	&stargate2_sram,
-	&smc91x_device,
-	&sht15,
-};
-
-static void __init stargate2_init(void)
-{
-	/* This is probably a board specific hack as this must be set
-	   prior to connecting the MFP stuff up. */
-	__raw_writel(__raw_readl(MECR) & ~MECR_NOS, MECR);
-
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(stargate2_pin_config));
-
-	imote2_stargate2_init();
-
-	gpiod_add_lookup_table(&sht15_gpiod_table);
-	platform_add_devices(ARRAY_AND_SIZE(stargate2_devices));
-
-	i2c_register_board_info(0, ARRAY_AND_SIZE(stargate2_i2c_board_info));
-	i2c_register_board_info(1, stargate2_pwr_i2c_board_info,
-				ARRAY_SIZE(stargate2_pwr_i2c_board_info));
-
-	pxa_set_mci_info(&stargate2_mci_platform_data);
-
-	pxa_set_udc_info(&stargate2_udc_info);
-
-	stargate2_reset_bluetooth();
-}
-#endif
-
-#ifdef CONFIG_MACH_INTELMOTE2
-MACHINE_START(INTELMOTE2, "IMOTE 2")
-	.map_io		= pxa27x_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa27x_init_irq,
-	.handle_irq	= pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine	= imote2_init,
-	.atag_offset	= 0x100,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_STARGATE2
-MACHINE_START(STARGATE2, "Stargate 2")
-	.map_io = pxa27x_map_io,
-	.nr_irqs = STARGATE_NR_IRQS,
-	.init_irq = pxa27x_init_irq,
-	.handle_irq = pxa27x_handle_irq,
-	.init_time	= pxa_timer_init,
-	.init_machine = stargate2_init,
-	.atag_offset = 0x100,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index 8e74fbb0a96e..7eaeda269927 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -570,7 +570,6 @@ static struct pxa2xx_spi_chip z2_lbs_chip_info = {
 	.rx_threshold	= 8,
 	.tx_threshold	= 8,
 	.timeout	= 1000,
-	.gpio_cs	= GPIO24_ZIPITZ2_WIFI_CS,
 };
 
 static struct libertas_spi_platform_data z2_lbs_pdata = {
@@ -584,7 +583,6 @@ static struct pxa2xx_spi_chip lms283_chip_info = {
 	.rx_threshold	= 1,
 	.tx_threshold	= 1,
 	.timeout	= 64,
-	.gpio_cs	= GPIO88_ZIPITZ2_LCD_CS,
 };
 
 static struct gpiod_lookup_table lms283_gpio_table = {
@@ -624,8 +622,26 @@ static struct pxa2xx_spi_controller pxa_ssp2_master_info = {
 	.num_chipselect	= 1,
 };
 
+static struct gpiod_lookup_table pxa_ssp1_gpio_table = {
+	.dev_id = "pxa2xx-spi.1",
+	.table = {
+		GPIO_LOOKUP_IDX("gpio-pxa", GPIO24_ZIPITZ2_WIFI_CS, "cs", 0, GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table pxa_ssp2_gpio_table = {
+	.dev_id = "pxa2xx-spi.2",
+	.table = {
+		GPIO_LOOKUP_IDX("gpio-pxa", GPIO88_ZIPITZ2_LCD_CS, "cs", 0, GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 static void __init z2_spi_init(void)
 {
+	gpiod_add_lookup_table(&pxa_ssp1_gpio_table);
+	gpiod_add_lookup_table(&pxa_ssp2_gpio_table);
 	pxa2xx_set_spi_info(1, &pxa_ssp1_master_info);
 	pxa2xx_set_spi_info(2, &pxa_ssp2_master_info);
 	gpiod_add_lookup_table(&lms283_gpio_table);
diff --git a/arch/arm/mach-qcom/platsmp.c b/arch/arm/mach-qcom/platsmp.c
index 58a4228455ce..65a0d5ce2bb3 100644
--- a/arch/arm/mach-qcom/platsmp.c
+++ b/arch/arm/mach-qcom/platsmp.c
@@ -357,8 +357,7 @@ static void __init qcom_smp_prepare_cpus(unsigned int max_cpus)
 {
 	int cpu;
 
-	if (qcom_scm_set_cold_boot_addr(secondary_startup_arm,
-					cpu_present_mask)) {
+	if (qcom_scm_set_cold_boot_addr(secondary_startup_arm)) {
 		for_each_present_cpu(cpu) {
 			if (cpu == smp_processor_id())
 				continue;
diff --git a/arch/arm/mach-rpc/fiq.S b/arch/arm/mach-rpc/fiq.S
index 0de83e9b0b39..087bdf4bc093 100644
--- a/arch/arm/mach-rpc/fiq.S
+++ b/arch/arm/mach-rpc/fiq.S
@@ -2,10 +2,11 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <mach/hardware.h>
-#include <mach/entry-macro.S>
 
-	.text
+	.equ	ioc_base_high, IOC_BASE & 0xff000000
+	.equ	ioc_base_low, IOC_BASE & 0x00ff0000
 
+	.text
 	.global	rpc_default_fiq_end
 ENTRY(rpc_default_fiq_start)
 	mov	r12, #ioc_base_high
diff --git a/arch/arm/mach-rpc/include/mach/entry-macro.S b/arch/arm/mach-rpc/include/mach/entry-macro.S
deleted file mode 100644
index a6d1a9f4bb79..000000000000
--- a/arch/arm/mach-rpc/include/mach/entry-macro.S
+++ /dev/null
@@ -1,13 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <mach/hardware.h>
-#include <asm/hardware/entry-macro-iomd.S>
-
-	.equ	ioc_base_high, IOC_BASE & 0xff000000
-	.equ	ioc_base_low, IOC_BASE & 0x00ff0000
-
-	.macro  get_irqnr_preamble, base, tmp
-	mov	\base, #ioc_base_high		@ point at IOC
-	.if	ioc_base_low
-	orr	\base, \base, #ioc_base_low
-	.endif
-	.endm
diff --git a/arch/arm/mach-rpc/irq.c b/arch/arm/mach-rpc/irq.c
index 803aeb126f0e..dc29384b6ef8 100644
--- a/arch/arm/mach-rpc/irq.c
+++ b/arch/arm/mach-rpc/irq.c
@@ -14,6 +14,99 @@
 #define CLR	0x04
 #define MASK	0x08
 
+static const u8 irq_prio_h[256] = {
+	 0, 8, 9, 8,10,10,10,10,11,11,11,11,10,10,10,10,
+	12, 8, 9, 8,10,10,10,10,11,11,11,11,10,10,10,10,
+	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10,
+	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10,
+	14,14,14,14,10,10,10,10,11,11,11,11,10,10,10,10,
+	14,14,14,14,10,10,10,10,11,11,11,11,10,10,10,10,
+	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10,
+	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10,
+	15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10,
+	15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10,
+	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10,
+	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10,
+	15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10,
+	15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10,
+	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10,
+	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10,
+};
+
+static const u8 irq_prio_d[256] = {
+	 0,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
+	20,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
+	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
+	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
+	22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
+	22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
+	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
+	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
+	23,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
+	23,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
+	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
+	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
+	22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
+	22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
+	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
+	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16,
+};
+
+static const u8 irq_prio_l[256] = {
+	 0, 0, 1, 0, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3,
+	 4, 0, 1, 0, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3,
+	 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5,
+	 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5,
+	 6, 6, 6, 6, 6, 6, 6, 6, 3, 3, 3, 3, 3, 3, 3, 3,
+	 6, 6, 6, 6, 6, 6, 6, 6, 3, 3, 3, 3, 3, 3, 3, 3,
+	 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5,
+	 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5,
+	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
+	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
+	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
+	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
+	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
+	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
+	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
+	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
+};
+
+static int iomd_get_irq_nr(void)
+{
+	int irq;
+	u8 reg;
+
+	/* get highest priority first */
+	reg = readb(IOC_BASE + IOMD_IRQREQB);
+	irq = irq_prio_h[reg];
+	if (irq)
+		return irq;
+
+	/* get DMA  */
+	reg = readb(IOC_BASE + IOMD_DMAREQ);
+	irq = irq_prio_d[reg];
+	if (irq)
+		return irq;
+
+	/* get low priority */
+	reg = readb(IOC_BASE + IOMD_IRQREQA);
+	irq = irq_prio_l[reg];
+	if (irq)
+		return irq;
+	return 0;
+}
+
+static void iomd_handle_irq(struct pt_regs *regs)
+{
+	int irq;
+
+	do {
+		irq = iomd_get_irq_nr();
+		if (irq)
+			generic_handle_irq(irq);
+	} while (irq);
+}
+
 static void __iomem *iomd_get_base(struct irq_data *d)
 {
 	void *cd = irq_data_get_irq_chip_data(d);
@@ -82,6 +175,8 @@ void __init rpc_init_irq(void)
 	set_fiq_handler(&rpc_default_fiq_start,
 		&rpc_default_fiq_end - &rpc_default_fiq_start);
 
+	set_handle_irq(iomd_handle_irq);
+
 	for (irq = 0; irq < NR_IRQS; irq++) {
 		clr = IRQ_NOREQUEST;
 		set = 0;
diff --git a/arch/arm/mach-s3c/Kconfig b/arch/arm/mach-s3c/Kconfig
index 25606e668cf9..1899fc3f44fd 100644
--- a/arch/arm/mach-s3c/Kconfig
+++ b/arch/arm/mach-s3c/Kconfig
@@ -191,18 +191,6 @@ config S3C64XX_DEV_SPI0
 	  Compile in platform device definitions for S3C64XX's type
 	  SPI controller 0
 
-config S3C64XX_DEV_SPI1
-	bool
-	help
-	  Compile in platform device definitions for S3C64XX's type
-	  SPI controller 1
-
-config S3C64XX_DEV_SPI2
-	bool
-	help
-	  Compile in platform device definitions for S3C64XX's type
-	  SPI controller 2
-
 config SAMSUNG_DEV_TS
 	bool
 	help
diff --git a/arch/arm/mach-s3c/devs.c b/arch/arm/mach-s3c/devs.c
index 06dec64848f9..1e266fc24f9b 100644
--- a/arch/arm/mach-s3c/devs.c
+++ b/arch/arm/mach-s3c/devs.c
@@ -1107,8 +1107,7 @@ struct platform_device s3c64xx_device_spi0 = {
 	},
 };
 
-void __init s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
-						int num_cs)
+void __init s3c64xx_spi0_set_platdata(int src_clk_nr, int num_cs)
 {
 	struct s3c64xx_spi_info pd;
 
@@ -1120,80 +1119,8 @@ void __init s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
 
 	pd.num_cs = num_cs;
 	pd.src_clk_nr = src_clk_nr;
-	pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi0_cfg_gpio;
+	pd.cfg_gpio = s3c64xx_spi0_cfg_gpio;
 
 	s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi0);
 }
 #endif /* CONFIG_S3C64XX_DEV_SPI0 */
-
-#ifdef CONFIG_S3C64XX_DEV_SPI1
-static struct resource s3c64xx_spi1_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_SPI1, SZ_256),
-	[1] = DEFINE_RES_IRQ(IRQ_SPI1),
-};
-
-struct platform_device s3c64xx_device_spi1 = {
-	.name		= "s3c6410-spi",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(s3c64xx_spi1_resource),
-	.resource	= s3c64xx_spi1_resource,
-	.dev = {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-void __init s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
-						int num_cs)
-{
-	struct s3c64xx_spi_info pd;
-
-	/* Reject invalid configuration */
-	if (!num_cs || src_clk_nr < 0) {
-		pr_err("%s: Invalid SPI configuration\n", __func__);
-		return;
-	}
-
-	pd.num_cs = num_cs;
-	pd.src_clk_nr = src_clk_nr;
-	pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi1_cfg_gpio;
-
-	s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi1);
-}
-#endif /* CONFIG_S3C64XX_DEV_SPI1 */
-
-#ifdef CONFIG_S3C64XX_DEV_SPI2
-static struct resource s3c64xx_spi2_resource[] = {
-	[0] = DEFINE_RES_MEM(S3C_PA_SPI2, SZ_256),
-	[1] = DEFINE_RES_IRQ(IRQ_SPI2),
-};
-
-struct platform_device s3c64xx_device_spi2 = {
-	.name		= "s3c6410-spi",
-	.id		= 2,
-	.num_resources	= ARRAY_SIZE(s3c64xx_spi2_resource),
-	.resource	= s3c64xx_spi2_resource,
-	.dev = {
-		.dma_mask		= &samsung_device_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-void __init s3c64xx_spi2_set_platdata(int (*cfg_gpio)(void), int src_clk_nr,
-						int num_cs)
-{
-	struct s3c64xx_spi_info pd;
-
-	/* Reject invalid configuration */
-	if (!num_cs || src_clk_nr < 0) {
-		pr_err("%s: Invalid SPI configuration\n", __func__);
-		return;
-	}
-
-	pd.num_cs = num_cs;
-	pd.src_clk_nr = src_clk_nr;
-	pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi2_cfg_gpio;
-
-	s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi2);
-}
-#endif /* CONFIG_S3C64XX_DEV_SPI2 */
diff --git a/arch/arm/mach-s3c/mach-crag6410-module.c b/arch/arm/mach-s3c/mach-crag6410-module.c
index 407ad493493e..5d1d4b67a4b7 100644
--- a/arch/arm/mach-s3c/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c/mach-crag6410-module.c
@@ -32,10 +32,6 @@
 
 #include "crag6410.h"
 
-static struct s3c64xx_spi_csinfo wm0010_spi_csinfo = {
-	.line = S3C64XX_GPC(3),
-};
-
 static struct wm0010_pdata wm0010_pdata = {
 	.gpio_reset = S3C64XX_GPN(6),
 	.reset_active_high = 1, /* Active high for Glenfarclas Rev 2 */
@@ -49,7 +45,6 @@ static struct spi_board_info wm1253_devs[] = {
 		.chip_select	= 0,
 		.mode		= SPI_MODE_0,
 		.irq		= S3C_EINT(4),
-		.controller_data = &wm0010_spi_csinfo,
 		.platform_data = &wm0010_pdata,
 	},
 };
@@ -62,7 +57,6 @@ static struct spi_board_info balblair_devs[] = {
 		.chip_select	= 0,
 		.mode		= SPI_MODE_0,
 		.irq		= S3C_EINT(4),
-		.controller_data = &wm0010_spi_csinfo,
 		.platform_data = &wm0010_pdata,
 	},
 };
@@ -229,10 +223,6 @@ static struct arizona_pdata wm5102_reva_pdata = {
 	},
 };
 
-static struct s3c64xx_spi_csinfo codec_spi_csinfo = {
-	.line = S3C64XX_GPN(5),
-};
-
 static struct spi_board_info wm5102_reva_spi_devs[] = {
 	[0] = {
 		.modalias	= "wm5102",
@@ -242,7 +232,6 @@ static struct spi_board_info wm5102_reva_spi_devs[] = {
 		.mode		= SPI_MODE_0,
 		.irq		= GLENFARCLAS_PMIC_IRQ_BASE +
 				  WM831X_IRQ_GPIO_2,
-		.controller_data = &codec_spi_csinfo,
 		.platform_data = &wm5102_reva_pdata,
 	},
 };
@@ -275,7 +264,6 @@ static struct spi_board_info wm5102_spi_devs[] = {
 		.mode		= SPI_MODE_0,
 		.irq		= GLENFARCLAS_PMIC_IRQ_BASE +
 				  WM831X_IRQ_GPIO_2,
-		.controller_data = &codec_spi_csinfo,
 		.platform_data = &wm5102_pdata,
 	},
 };
@@ -298,7 +286,6 @@ static struct spi_board_info wm5110_spi_devs[] = {
 		.mode		= SPI_MODE_0,
 		.irq		= GLENFARCLAS_PMIC_IRQ_BASE +
 				  WM831X_IRQ_GPIO_2,
-		.controller_data = &codec_spi_csinfo,
 		.platform_data = &wm5102_reva_pdata,
 	},
 };
diff --git a/arch/arm/mach-s3c/mach-crag6410.c b/arch/arm/mach-s3c/mach-crag6410.c
index 4a12c75d407f..e3e0fe897bcc 100644
--- a/arch/arm/mach-s3c/mach-crag6410.c
+++ b/arch/arm/mach-s3c/mach-crag6410.c
@@ -825,6 +825,15 @@ static const struct gpio_led_platform_data gpio_leds_pdata = {
 
 static struct dwc2_hsotg_plat crag6410_hsotg_pdata;
 
+static struct gpiod_lookup_table crag_spi0_gpiod_table = {
+	.dev_id = "s3c6410-spi.0",
+	.table = {
+		GPIO_LOOKUP_IDX("GPIOC", 3, "cs", 0, GPIO_ACTIVE_LOW),
+		GPIO_LOOKUP_IDX("GPION", 5, "cs", 1, GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 static void __init crag6410_machine_init(void)
 {
 	/* Open drain IRQs need pullups */
@@ -856,7 +865,9 @@ static void __init crag6410_machine_init(void)
 	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
 
 	samsung_keypad_set_platdata(&crag6410_keypad_data);
-	s3c64xx_spi0_set_platdata(NULL, 0, 2);
+
+	gpiod_add_lookup_table(&crag_spi0_gpiod_table);
+	s3c64xx_spi0_set_platdata(0, 2);
 
 	pwm_add_table(crag6410_pwm_lookup, ARRAY_SIZE(crag6410_pwm_lookup));
 	platform_add_devices(crag6410_devices, ARRAY_SIZE(crag6410_devices));
diff --git a/arch/arm/mach-s3c/setup-spi-s3c64xx.c b/arch/arm/mach-s3c/setup-spi-s3c64xx.c
index efcf78d41585..497aff71c29c 100644
--- a/arch/arm/mach-s3c/setup-spi-s3c64xx.c
+++ b/arch/arm/mach-s3c/setup-spi-s3c64xx.c
@@ -16,12 +16,3 @@ int s3c64xx_spi0_cfg_gpio(void)
 	return 0;
 }
 #endif
-
-#ifdef CONFIG_S3C64XX_DEV_SPI1
-int s3c64xx_spi1_cfg_gpio(void)
-{
-	s3c_gpio_cfgall_range(S3C64XX_GPC(4), 3,
-				S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-	return 0;
-}
-#endif
diff --git a/arch/arm/mach-s3c/spi-core-s3c24xx.h b/arch/arm/mach-s3c/spi-core-s3c24xx.h
index 057667469cc3..919c5fd0c9af 100644
--- a/arch/arm/mach-s3c/spi-core-s3c24xx.h
+++ b/arch/arm/mach-s3c/spi-core-s3c24xx.h
@@ -16,12 +16,6 @@ static inline void s3c24xx_spi_setname(char *name)
 #ifdef CONFIG_S3C64XX_DEV_SPI0
 	s3c64xx_device_spi0.name = name;
 #endif
-#ifdef CONFIG_S3C64XX_DEV_SPI1
-	s3c64xx_device_spi1.name = name;
-#endif
-#ifdef CONFIG_S3C64XX_DEV_SPI2
-	s3c64xx_device_spi2.name = name;
-#endif
 }
 
 #endif /* __PLAT_S3C_SPI_CORE_S3C24XX_H */
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 3683d6f10973..50909c4b95b2 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 menuconfig ARCH_RENESAS
 	bool "Renesas ARM SoCs"
-	depends on ARCH_MULTI_V7 && MMU
+	depends on ARCH_MULTI_V7
 	select ARM_GIC
 	select GPIOLIB
 	select NO_IOPORT_MAP
diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig
index 43ddec677c0b..594edf9bbea4 100644
--- a/arch/arm/mach-socfpga/Kconfig
+++ b/arch/arm/mach-socfpga/Kconfig
@@ -2,6 +2,7 @@
 menuconfig ARCH_INTEL_SOCFPGA
 	bool "Altera SOCFPGA family"
 	depends on ARCH_MULTI_V7
+	select ARCH_HAS_RESET_CONTROLLER
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ARM_AMBA
 	select ARM_GIC
@@ -18,6 +19,7 @@ menuconfig ARCH_INTEL_SOCFPGA
 	select PL310_ERRATA_727915
 	select PL310_ERRATA_753970 if PL310
 	select PL310_ERRATA_769419
+	select RESET_CONTROLLER
 
 if ARCH_INTEL_SOCFPGA
 config SOCFPGA_SUSPEND
diff --git a/arch/arm/mach-spear/spear13xx.c b/arch/arm/mach-spear/spear13xx.c
index 74d1ca2a529a..b38391e9d8bf 100644
--- a/arch/arm/mach-spear/spear13xx.c
+++ b/arch/arm/mach-spear/spear13xx.c
@@ -29,7 +29,7 @@ void __init spear13xx_l2x0_init(void)
 	/*
 	 * 512KB (64KB/way), 8-way associativity, parity supported
 	 *
-	 * FIXME: 9th bit, of Auxillary Controller register must be set
+	 * FIXME: 9th bit, of Auxiliary Controller register must be set
 	 * for some spear13xx devices for stable L2 operation.
 	 *
 	 * Enable Early BRESP, L2 prefetch for Instruction and Data,
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 24ed7f4a87a4..c18def269137 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 menuconfig ARCH_U8500
 	bool "ST-Ericsson U8500 Series"
-	depends on ARCH_MULTI_V7 && MMU
+	depends on ARCH_MULTI_V7
 	select AB8500_CORE
 	select ABX500_CORE
 	select ARM_AMBA
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 58afba346729..d30ee26ccc87 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -386,6 +386,7 @@ config CPU_V6
 	select CPU_PABRT_V6
 	select CPU_THUMB_CAPABLE
 	select CPU_TLB_V6 if MMU
+	select SMP_ON_UP if SMP
 
 # ARMv6k
 config CPU_V6K
@@ -830,6 +831,7 @@ config CPU_BPREDICT_DISABLE
 
 config CPU_SPECTRE
 	bool
+	select GENERIC_CPU_VULNERABILITIES
 
 config HARDEN_BRANCH_PREDICTOR
 	bool "Harden the branch predictor against aliasing attacks" if EXPERT
@@ -850,6 +852,16 @@ config HARDEN_BRANCH_PREDICTOR
 
 	   If unsure, say Y.
 
+config HARDEN_BRANCH_HISTORY
+	bool "Harden Spectre style attacks against branch history" if EXPERT
+	depends on CPU_SPECTRE
+	default y
+	help
+	  Speculation attacks against some high-performance processors can
+	  make use of branch history to influence future speculation. When
+	  taking an exception, a sequence of branches overwrites the branch
+	  history, or branch history is invalidated.
+
 config TLS_REG_EMUL
 	bool
 	select NEED_KUSER_HELPERS
diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index 830bbfb26ca5..7c9499b728c4 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -90,7 +90,7 @@ ENDPROC(v7_flush_icache_all)
  *
  *     Flush the D-cache up to the Level of Unification Inner Shareable
  *
- *     Corrupted registers: r0-r7, r9-r11 (r6 only in Thumb mode)
+ *     Corrupted registers: r0-r6, r9-r10
  */
 
 ENTRY(v7_flush_dcache_louis)
@@ -117,7 +117,7 @@ ENDPROC(v7_flush_dcache_louis)
  *
  *	Flush the whole D-cache.
  *
- *	Corrupted registers: r0-r7, r9-r11 (r6 only in Thumb mode)
+ *	Corrupted registers: r0-r6, r9-r10
  *
  *	- mm    - mm_struct describing address space
  */
@@ -149,22 +149,22 @@ flush_levels:
 	movw	r4, #0x3ff
 	ands	r4, r4, r1, lsr #3		@ find maximum number on the way size
 	clz	r5, r4				@ find bit position of way size increment
-	movw	r7, #0x7fff
-	ands	r7, r7, r1, lsr #13		@ extract max number of the index size
+	movw	r6, #0x7fff
+	and	r1, r6, r1, lsr #13		@ extract max number of the index size
+	mov	r6, #1
+	movne	r4, r4, lsl r5			@ # of ways shifted into bits [31:...]
+	movne	r6, r6, lsl r5			@ 1 shifted left by same amount
 loop1:
-	mov	r9, r7				@ create working copy of max index
+	mov	r9, r1				@ create working copy of max index
 loop2:
- ARM(	orr	r11, r10, r4, lsl r5	)	@ factor way and cache number into r11
- THUMB(	lsl	r6, r4, r5		)
- THUMB(	orr	r11, r10, r6		)	@ factor way and cache number into r11
- ARM(	orr	r11, r11, r9, lsl r2	)	@ factor index number into r11
- THUMB(	lsl	r6, r9, r2		)
- THUMB(	orr	r11, r11, r6		)	@ factor index number into r11
-	mcr	p15, 0, r11, c7, c14, 2		@ clean & invalidate by set/way
+	mov	r5, r9, lsl r2			@ factor set number into r5
+	orr	r5, r5, r4			@ factor way number into r5
+	orr	r5, r5, r10			@ factor cache level into r5
+	mcr	p15, 0, r5, c7, c14, 2		@ clean & invalidate by set/way
 	subs	r9, r9, #1			@ decrement the index
 	bge	loop2
-	subs	r4, r4, #1			@ decrement the way
-	bge	loop1
+	subs	r4, r4, r6			@ decrement the way
+	bcs	loop1
 skip:
 	add	r10, r10, #2			@ increment cache number
 	cmp	r3, r10
@@ -192,14 +192,12 @@ ENDPROC(v7_flush_dcache_all)
  *
  */
 ENTRY(v7_flush_kern_cache_all)
- ARM(	stmfd	sp!, {r4-r5, r7, r9-r11, lr}	)
- THUMB(	stmfd	sp!, {r4-r7, r9-r11, lr}	)
+	stmfd	sp!, {r4-r6, r9-r10, lr}
 	bl	v7_flush_dcache_all
 	mov	r0, #0
 	ALT_SMP(mcr	p15, 0, r0, c7, c1, 0)	@ invalidate I-cache inner shareable
 	ALT_UP(mcr	p15, 0, r0, c7, c5, 0)	@ I+BTB cache invalidate
- ARM(	ldmfd	sp!, {r4-r5, r7, r9-r11, lr}	)
- THUMB(	ldmfd	sp!, {r4-r7, r9-r11, lr}	)
+	ldmfd	sp!, {r4-r6, r9-r10, lr}
 	ret	lr
 ENDPROC(v7_flush_kern_cache_all)
 
@@ -210,14 +208,12 @@ ENDPROC(v7_flush_kern_cache_all)
  *     Invalidate the I-cache to the point of unification.
  */
 ENTRY(v7_flush_kern_cache_louis)
- ARM(	stmfd	sp!, {r4-r5, r7, r9-r11, lr}	)
- THUMB(	stmfd	sp!, {r4-r7, r9-r11, lr}	)
+	stmfd	sp!, {r4-r6, r9-r10, lr}
 	bl	v7_flush_dcache_louis
 	mov	r0, #0
 	ALT_SMP(mcr	p15, 0, r0, c7, c1, 0)	@ invalidate I-cache inner shareable
 	ALT_UP(mcr	p15, 0, r0, c7, c5, 0)	@ I+BTB cache invalidate
- ARM(	ldmfd	sp!, {r4-r5, r7, r9-r11, lr}	)
- THUMB(	ldmfd	sp!, {r4-r7, r9-r11, lr}	)
+	ldmfd	sp!, {r4-r6, r9-r10, lr}
 	ret	lr
 ENDPROC(v7_flush_kern_cache_louis)
 
diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c
index 48091870db89..4204ffa2d104 100644
--- a/arch/arm/mm/context.c
+++ b/arch/arm/mm/context.c
@@ -240,8 +240,7 @@ void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk)
 	unsigned int cpu = smp_processor_id();
 	u64 asid;
 
-	if (unlikely(mm->context.vmalloc_seq != init_mm.context.vmalloc_seq))
-		__check_vmalloc_seq(mm);
+	check_vmalloc_seq(mm);
 
 	/*
 	 * We cannot update the pgd and the ASID atomicly with classic
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 6d0cb0f7bc54..fe249ea91908 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -164,47 +164,6 @@ phys_addr_t __init arm_memblock_steal(phys_addr_t size, phys_addr_t align)
 	return phys;
 }
 
-static void __init arm_initrd_init(void)
-{
-#ifdef CONFIG_BLK_DEV_INITRD
-	phys_addr_t start;
-	unsigned long size;
-
-	initrd_start = initrd_end = 0;
-
-	if (!phys_initrd_size)
-		return;
-
-	/*
-	 * Round the memory region to page boundaries as per free_initrd_mem()
-	 * This allows us to detect whether the pages overlapping the initrd
-	 * are in use, but more importantly, reserves the entire set of pages
-	 * as we don't want these pages allocated for other purposes.
-	 */
-	start = round_down(phys_initrd_start, PAGE_SIZE);
-	size = phys_initrd_size + (phys_initrd_start - start);
-	size = round_up(size, PAGE_SIZE);
-
-	if (!memblock_is_region_memory(start, size)) {
-		pr_err("INITRD: 0x%08llx+0x%08lx is not a memory region - disabling initrd\n",
-		       (u64)start, size);
-		return;
-	}
-
-	if (memblock_is_region_reserved(start, size)) {
-		pr_err("INITRD: 0x%08llx+0x%08lx overlaps in-use memory region - disabling initrd\n",
-		       (u64)start, size);
-		return;
-	}
-
-	memblock_reserve(start, size);
-
-	/* Now convert initrd to virtual addresses */
-	initrd_start = __phys_to_virt(phys_initrd_start);
-	initrd_end = initrd_start + phys_initrd_size;
-#endif
-}
-
 #ifdef CONFIG_CPU_ICACHE_MISMATCH_WORKAROUND
 void check_cpu_icache_size(int cpuid)
 {
@@ -226,7 +185,7 @@ void __init arm_memblock_init(const struct machine_desc *mdesc)
 	/* Register the kernel text, kernel data and initrd with memblock. */
 	memblock_reserve(__pa(KERNEL_START), KERNEL_END - KERNEL_START);
 
-	arm_initrd_init();
+	reserve_initrd_mem();
 
 	arm_mm_memblock_reserve();
 
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index 197f8eb3a775..aa08bcb72db9 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -117,16 +117,21 @@ EXPORT_SYMBOL(ioremap_page);
 
 void __check_vmalloc_seq(struct mm_struct *mm)
 {
-	unsigned int seq;
+	int seq;
 
 	do {
-		seq = init_mm.context.vmalloc_seq;
+		seq = atomic_read(&init_mm.context.vmalloc_seq);
 		memcpy(pgd_offset(mm, VMALLOC_START),
 		       pgd_offset_k(VMALLOC_START),
 		       sizeof(pgd_t) * (pgd_index(VMALLOC_END) -
 					pgd_index(VMALLOC_START)));
-		mm->context.vmalloc_seq = seq;
-	} while (seq != init_mm.context.vmalloc_seq);
+		/*
+		 * Use a store-release so that other CPUs that observe the
+		 * counter's new value are guaranteed to see the results of the
+		 * memcpy as well.
+		 */
+		atomic_set_release(&mm->context.vmalloc_seq, seq);
+	} while (seq != atomic_read(&init_mm.context.vmalloc_seq));
 }
 
 #if !defined(CONFIG_SMP) && !defined(CONFIG_ARM_LPAE)
@@ -157,7 +162,7 @@ static void unmap_area_sections(unsigned long virt, unsigned long size)
 			 * Note: this is still racy on SMP machines.
 			 */
 			pmd_clear(pmdp);
-			init_mm.context.vmalloc_seq++;
+			atomic_inc_return_release(&init_mm.context.vmalloc_seq);
 
 			/*
 			 * Free the page table, if there was one.
@@ -174,8 +179,7 @@ static void unmap_area_sections(unsigned long virt, unsigned long size)
 	 * Ensure that the active_mm is up to date - we want to
 	 * catch any use-after-iounmap cases.
 	 */
-	if (current->active_mm->context.vmalloc_seq != init_mm.context.vmalloc_seq)
-		__check_vmalloc_seq(current->active_mm);
+	check_vmalloc_seq(current->active_mm);
 
 	flush_tlb_kernel_range(virt, end);
 }
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 274e4f73fd33..5e2be37a198e 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -212,12 +212,14 @@ early_param("ecc", early_ecc);
 static int __init early_cachepolicy(char *p)
 {
 	pr_warn("cachepolicy kernel parameter not supported without cp15\n");
+	return 0;
 }
 early_param("cachepolicy", early_cachepolicy);
 
 static int __init noalign_setup(char *__unused)
 {
 	pr_warn("noalign kernel parameter not supported without cp15\n");
+	return 1;
 }
 __setup("noalign", noalign_setup);
 
diff --git a/arch/arm/mm/proc-v7-bugs.c b/arch/arm/mm/proc-v7-bugs.c
index 114c05ab4dd9..06dbfb968182 100644
--- a/arch/arm/mm/proc-v7-bugs.c
+++ b/arch/arm/mm/proc-v7-bugs.c
@@ -6,8 +6,35 @@
 #include <asm/cp15.h>
 #include <asm/cputype.h>
 #include <asm/proc-fns.h>
+#include <asm/spectre.h>
 #include <asm/system_misc.h>
 
+#ifdef CONFIG_ARM_PSCI
+static int __maybe_unused spectre_v2_get_cpu_fw_mitigation_state(void)
+{
+	struct arm_smccc_res res;
+
+	arm_smccc_1_1_invoke(ARM_SMCCC_ARCH_FEATURES_FUNC_ID,
+			     ARM_SMCCC_ARCH_WORKAROUND_1, &res);
+
+	switch ((int)res.a0) {
+	case SMCCC_RET_SUCCESS:
+		return SPECTRE_MITIGATED;
+
+	case SMCCC_ARCH_WORKAROUND_RET_UNAFFECTED:
+		return SPECTRE_UNAFFECTED;
+
+	default:
+		return SPECTRE_VULNERABLE;
+	}
+}
+#else
+static int __maybe_unused spectre_v2_get_cpu_fw_mitigation_state(void)
+{
+	return SPECTRE_VULNERABLE;
+}
+#endif
+
 #ifdef CONFIG_HARDEN_BRANCH_PREDICTOR
 DEFINE_PER_CPU(harden_branch_predictor_fn_t, harden_branch_predictor_fn);
 
@@ -36,13 +63,61 @@ static void __maybe_unused call_hvc_arch_workaround_1(void)
 	arm_smccc_1_1_hvc(ARM_SMCCC_ARCH_WORKAROUND_1, NULL);
 }
 
-static void cpu_v7_spectre_init(void)
+static unsigned int spectre_v2_install_workaround(unsigned int method)
 {
 	const char *spectre_v2_method = NULL;
 	int cpu = smp_processor_id();
 
 	if (per_cpu(harden_branch_predictor_fn, cpu))
-		return;
+		return SPECTRE_MITIGATED;
+
+	switch (method) {
+	case SPECTRE_V2_METHOD_BPIALL:
+		per_cpu(harden_branch_predictor_fn, cpu) =
+			harden_branch_predictor_bpiall;
+		spectre_v2_method = "BPIALL";
+		break;
+
+	case SPECTRE_V2_METHOD_ICIALLU:
+		per_cpu(harden_branch_predictor_fn, cpu) =
+			harden_branch_predictor_iciallu;
+		spectre_v2_method = "ICIALLU";
+		break;
+
+	case SPECTRE_V2_METHOD_HVC:
+		per_cpu(harden_branch_predictor_fn, cpu) =
+			call_hvc_arch_workaround_1;
+		cpu_do_switch_mm = cpu_v7_hvc_switch_mm;
+		spectre_v2_method = "hypervisor";
+		break;
+
+	case SPECTRE_V2_METHOD_SMC:
+		per_cpu(harden_branch_predictor_fn, cpu) =
+			call_smc_arch_workaround_1;
+		cpu_do_switch_mm = cpu_v7_smc_switch_mm;
+		spectre_v2_method = "firmware";
+		break;
+	}
+
+	if (spectre_v2_method)
+		pr_info("CPU%u: Spectre v2: using %s workaround\n",
+			smp_processor_id(), spectre_v2_method);
+
+	return SPECTRE_MITIGATED;
+}
+#else
+static unsigned int spectre_v2_install_workaround(unsigned int method)
+{
+	pr_info("CPU%u: Spectre V2: workarounds disabled by configuration\n",
+		smp_processor_id());
+
+	return SPECTRE_VULNERABLE;
+}
+#endif
+
+static void cpu_v7_spectre_v2_init(void)
+{
+	unsigned int state, method = 0;
 
 	switch (read_cpuid_part()) {
 	case ARM_CPU_PART_CORTEX_A8:
@@ -51,69 +126,133 @@ static void cpu_v7_spectre_init(void)
 	case ARM_CPU_PART_CORTEX_A17:
 	case ARM_CPU_PART_CORTEX_A73:
 	case ARM_CPU_PART_CORTEX_A75:
-		per_cpu(harden_branch_predictor_fn, cpu) =
-			harden_branch_predictor_bpiall;
-		spectre_v2_method = "BPIALL";
+		state = SPECTRE_MITIGATED;
+		method = SPECTRE_V2_METHOD_BPIALL;
 		break;
 
 	case ARM_CPU_PART_CORTEX_A15:
 	case ARM_CPU_PART_BRAHMA_B15:
-		per_cpu(harden_branch_predictor_fn, cpu) =
-			harden_branch_predictor_iciallu;
-		spectre_v2_method = "ICIALLU";
+		state = SPECTRE_MITIGATED;
+		method = SPECTRE_V2_METHOD_ICIALLU;
 		break;
 
-#ifdef CONFIG_ARM_PSCI
 	case ARM_CPU_PART_BRAHMA_B53:
 		/* Requires no workaround */
+		state = SPECTRE_UNAFFECTED;
 		break;
+
 	default:
 		/* Other ARM CPUs require no workaround */
-		if (read_cpuid_implementor() == ARM_CPU_IMP_ARM)
+		if (read_cpuid_implementor() == ARM_CPU_IMP_ARM) {
+			state = SPECTRE_UNAFFECTED;
 			break;
+		}
+
 		fallthrough;
-		/* Cortex A57/A72 require firmware workaround */
-	case ARM_CPU_PART_CORTEX_A57:
-	case ARM_CPU_PART_CORTEX_A72: {
-		struct arm_smccc_res res;
 
-		arm_smccc_1_1_invoke(ARM_SMCCC_ARCH_FEATURES_FUNC_ID,
-				     ARM_SMCCC_ARCH_WORKAROUND_1, &res);
-		if ((int)res.a0 != 0)
-			return;
+	/* Cortex A57/A72 require firmware workaround */
+	case ARM_CPU_PART_CORTEX_A57:
+	case ARM_CPU_PART_CORTEX_A72:
+		state = spectre_v2_get_cpu_fw_mitigation_state();
+		if (state != SPECTRE_MITIGATED)
+			break;
 
 		switch (arm_smccc_1_1_get_conduit()) {
 		case SMCCC_CONDUIT_HVC:
-			per_cpu(harden_branch_predictor_fn, cpu) =
-				call_hvc_arch_workaround_1;
-			cpu_do_switch_mm = cpu_v7_hvc_switch_mm;
-			spectre_v2_method = "hypervisor";
+			method = SPECTRE_V2_METHOD_HVC;
 			break;
 
 		case SMCCC_CONDUIT_SMC:
-			per_cpu(harden_branch_predictor_fn, cpu) =
-				call_smc_arch_workaround_1;
-			cpu_do_switch_mm = cpu_v7_smc_switch_mm;
-			spectre_v2_method = "firmware";
+			method = SPECTRE_V2_METHOD_SMC;
 			break;
 
 		default:
+			state = SPECTRE_VULNERABLE;
 			break;
 		}
 	}
-#endif
+
+	if (state == SPECTRE_MITIGATED)
+		state = spectre_v2_install_workaround(method);
+
+	spectre_v2_update_state(state, method);
+}
+
+#ifdef CONFIG_HARDEN_BRANCH_HISTORY
+static int spectre_bhb_method;
+
+static const char *spectre_bhb_method_name(int method)
+{
+	switch (method) {
+	case SPECTRE_V2_METHOD_LOOP8:
+		return "loop";
+
+	case SPECTRE_V2_METHOD_BPIALL:
+		return "BPIALL";
+
+	default:
+		return "unknown";
 	}
+}
 
-	if (spectre_v2_method)
-		pr_info("CPU%u: Spectre v2: using %s workaround\n",
-			smp_processor_id(), spectre_v2_method);
+static int spectre_bhb_install_workaround(int method)
+{
+	if (spectre_bhb_method != method) {
+		if (spectre_bhb_method) {
+			pr_err("CPU%u: Spectre BHB: method disagreement, system vulnerable\n",
+			       smp_processor_id());
+
+			return SPECTRE_VULNERABLE;
+		}
+
+		if (spectre_bhb_update_vectors(method) == SPECTRE_VULNERABLE)
+			return SPECTRE_VULNERABLE;
+
+		spectre_bhb_method = method;
+	}
+
+	pr_info("CPU%u: Spectre BHB: using %s workaround\n",
+		smp_processor_id(), spectre_bhb_method_name(method));
+
+	return SPECTRE_MITIGATED;
 }
 #else
-static void cpu_v7_spectre_init(void)
+static int spectre_bhb_install_workaround(int method)
 {
+	return SPECTRE_VULNERABLE;
 }
 #endif
 
+static void cpu_v7_spectre_bhb_init(void)
+{
+	unsigned int state, method = 0;
+
+	switch (read_cpuid_part()) {
+	case ARM_CPU_PART_CORTEX_A15:
+	case ARM_CPU_PART_BRAHMA_B15:
+	case ARM_CPU_PART_CORTEX_A57:
+	case ARM_CPU_PART_CORTEX_A72:
+		state = SPECTRE_MITIGATED;
+		method = SPECTRE_V2_METHOD_LOOP8;
+		break;
+
+	case ARM_CPU_PART_CORTEX_A73:
+	case ARM_CPU_PART_CORTEX_A75:
+		state = SPECTRE_MITIGATED;
+		method = SPECTRE_V2_METHOD_BPIALL;
+		break;
+
+	default:
+		state = SPECTRE_UNAFFECTED;
+		break;
+	}
+
+	if (state == SPECTRE_MITIGATED)
+		state = spectre_bhb_install_workaround(method);
+
+	spectre_v2_update_state(state, method);
+}
+
 static __maybe_unused bool cpu_v7_check_auxcr_set(bool *warned,
 						  u32 mask, const char *msg)
 {
@@ -142,16 +281,17 @@ static bool check_spectre_auxcr(bool *warned, u32 bit)
 void cpu_v7_ca8_ibe(void)
 {
 	if (check_spectre_auxcr(this_cpu_ptr(&spectre_warned), BIT(6)))
-		cpu_v7_spectre_init();
+		cpu_v7_spectre_v2_init();
 }
 
 void cpu_v7_ca15_ibe(void)
 {
 	if (check_spectre_auxcr(this_cpu_ptr(&spectre_warned), BIT(0)))
-		cpu_v7_spectre_init();
+		cpu_v7_spectre_v2_init();
 }
 
 void cpu_v7_bugs_init(void)
 {
-	cpu_v7_spectre_init();
+	cpu_v7_spectre_v2_init();
+	cpu_v7_spectre_bhb_init();
 }
diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c
index 734f0be4f14a..3ef9ecdd6343 100644
--- a/arch/arm/plat-orion/gpio.c
+++ b/arch/arm/plat-orion/gpio.c
@@ -516,8 +516,7 @@ static void orion_gpio_mask_irq(struct irq_data *d)
 	irq_gc_unlock(gc);
 }
 
-void __init orion_gpio_init(struct device_node *np,
-			    int gpio_base, int ngpio,
+void __init orion_gpio_init(int gpio_base, int ngpio,
 			    void __iomem *base, int mask_offset,
 			    int secondary_irq_base,
 			    int irqs[4])
@@ -545,9 +544,6 @@ void __init orion_gpio_init(struct device_node *np,
 	ochip->chip.base = gpio_base;
 	ochip->chip.ngpio = ngpio;
 	ochip->chip.can_sleep = 0;
-#ifdef CONFIG_OF
-	ochip->chip.of_node = np;
-#endif
 	ochip->chip.dbg_show = orion_gpio_dbg_show;
 
 	spin_lock_init(&ochip->lock);
@@ -605,7 +601,7 @@ void __init orion_gpio_init(struct device_node *np,
 			       IRQ_NOREQUEST, IRQ_LEVEL | IRQ_NOPROBE);
 
 	/* Setup irq domain on top of the generic chip. */
-	ochip->domain = irq_domain_add_legacy(np,
+	ochip->domain = irq_domain_add_legacy(NULL,
 					      ochip->chip.ngpio,
 					      ochip->secondary_irq_base,
 					      ochip->secondary_irq_base,
diff --git a/arch/arm/plat-orion/include/plat/orion-gpio.h b/arch/arm/plat-orion/include/plat/orion-gpio.h
index e856b073a9c8..25a2963e0e0f 100644
--- a/arch/arm/plat-orion/include/plat/orion-gpio.h
+++ b/arch/arm/plat-orion/include/plat/orion-gpio.h
@@ -30,8 +30,7 @@ int orion_gpio_led_blink_set(struct gpio_desc *desc, int state,
 void orion_gpio_set_valid(unsigned pin, int mode);
 
 /* Initialize gpiolib. */
-void __init orion_gpio_init(struct device_node *np,
-			    int gpio_base, int ngpio,
+void __init orion_gpio_init(int gpio_base, int ngpio,
 			    void __iomem *base, int mask_offset,
 			    int secondary_irq_base,
 			    int irq[4]);
diff --git a/arch/arm/probes/kprobes/actions-common.c b/arch/arm/probes/kprobes/actions-common.c
index 836aebe596cd..79171344dbeb 100644
--- a/arch/arm/probes/kprobes/actions-common.c
+++ b/arch/arm/probes/kprobes/actions-common.c
@@ -84,7 +84,8 @@ emulate_generic_r0_12_noflags(probes_opcode_t insn,
 	register void *rfn asm("lr") = asi->insn_fn;
 
 	__asm__ __volatile__ (
-		"stmdb	sp!, {%[regs], r11}	\n\t"
+ARM(		"stmdb	sp!, {%[regs], r11}	\n\t"	)
+THUMB(		"stmdb	sp!, {%[regs], r7}	\n\t"	)
 		"ldmia	%[regs], {r0-r12}	\n\t"
 #if __LINUX_ARM_ARCH__ >= 6
 		"blx	%[fn]			\n\t"
@@ -96,10 +97,11 @@ emulate_generic_r0_12_noflags(probes_opcode_t insn,
 #endif
 		"ldr	lr, [sp], #4		\n\t" /* lr = regs */
 		"stmia	lr, {r0-r12}		\n\t"
-		"ldr	r11, [sp], #4		\n\t"
+ARM(		"ldr	r11, [sp], #4		\n\t"	)
+THUMB(		"ldr	r7, [sp], #4		\n\t"	)
 		: [regs] "=r" (rregs), [fn] "=r" (rfn)
 		: "0" (rregs), "1" (rfn)
-		: "r0", "r2", "r3", "r4", "r5", "r6", "r7",
+		: "r0", "r2", "r3", "r4", "r5", "r6", ARM("r7") THUMB("r11"),
 		  "r8", "r9", "r10", "r12", "memory", "cc"
 		);
 }
diff --git a/arch/arm/probes/kprobes/actions-thumb.c b/arch/arm/probes/kprobes/actions-thumb.c
index 7884fcb81c26..51624fc263fc 100644
--- a/arch/arm/probes/kprobes/actions-thumb.c
+++ b/arch/arm/probes/kprobes/actions-thumb.c
@@ -447,14 +447,16 @@ t16_emulate_loregs(probes_opcode_t insn,
 
 	__asm__ __volatile__ (
 		"msr	cpsr_fs, %[oldcpsr]	\n\t"
+		"mov	r11, r7			\n\t"
 		"ldmia	%[regs], {r0-r7}	\n\t"
 		"blx	%[fn]			\n\t"
 		"stmia	%[regs], {r0-r7}	\n\t"
+		"mov	r7, r11			\n\t"
 		"mrs	%[newcpsr], cpsr	\n\t"
 		: [newcpsr] "=r" (newcpsr)
 		: [oldcpsr] "r" (oldcpsr), [regs] "r" (regs),
 		  [fn] "r" (asi->insn_fn)
-		: "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",
+		: "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r11",
 		  "lr", "memory", "cc"
 		);
 
@@ -524,14 +526,16 @@ t16_emulate_push(probes_opcode_t insn,
 		struct arch_probes_insn *asi, struct pt_regs *regs)
 {
 	__asm__ __volatile__ (
+		"mov	r11, r7			\n\t"
 		"ldr	r9, [%[regs], #13*4]	\n\t"
 		"ldr	r8, [%[regs], #14*4]	\n\t"
 		"ldmia	%[regs], {r0-r7}	\n\t"
 		"blx	%[fn]			\n\t"
 		"str	r9, [%[regs], #13*4]	\n\t"
+		"mov	r7, r11			\n\t"
 		:
 		: [regs] "r" (regs), [fn] "r" (asi->insn_fn)
-		: "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", "r8", "r9",
+		: "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r8", "r9", "r11",
 		  "lr", "memory", "cc"
 		);
 }
@@ -558,14 +562,16 @@ t16_emulate_pop_nopc(probes_opcode_t insn,
 		struct arch_probes_insn *asi, struct pt_regs *regs)
 {
 	__asm__ __volatile__ (
+		"mov	r11, r7			\n\t"
 		"ldr	r9, [%[regs], #13*4]	\n\t"
 		"ldmia	%[regs], {r0-r7}	\n\t"
 		"blx	%[fn]			\n\t"
 		"stmia	%[regs], {r0-r7}	\n\t"
 		"str	r9, [%[regs], #13*4]	\n\t"
+		"mov	r7, r11			\n\t"
 		:
 		: [regs] "r" (regs), [fn] "r" (asi->insn_fn)
-		: "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", "r9",
+		: "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r9", "r11",
 		  "lr", "memory", "cc"
 		);
 }
@@ -577,14 +583,16 @@ t16_emulate_pop_pc(probes_opcode_t insn,
 	register unsigned long pc asm("r8");
 
 	__asm__ __volatile__ (
+		"mov	r11, r7			\n\t"
 		"ldr	r9, [%[regs], #13*4]	\n\t"
 		"ldmia	%[regs], {r0-r7}	\n\t"
 		"blx	%[fn]			\n\t"
 		"stmia	%[regs], {r0-r7}	\n\t"
 		"str	r9, [%[regs], #13*4]	\n\t"
+		"mov	r7, r11			\n\t"
 		: "=r" (pc)
 		: [regs] "r" (regs), [fn] "r" (asi->insn_fn)
-		: "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", "r9",
+		: "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r9", "r11",
 		  "lr", "memory", "cc"
 		);
 
diff --git a/arch/arm/vdso/Makefile b/arch/arm/vdso/Makefile
index 7c9e395b77f7..ec52b776f926 100644
--- a/arch/arm/vdso/Makefile
+++ b/arch/arm/vdso/Makefile
@@ -18,7 +18,7 @@ ccflags-y += -DDISABLE_BRANCH_PROFILING -DBUILD_VDSO32
 
 ldflags-$(CONFIG_CPU_ENDIAN_BE8) := --be8
 ldflags-y := -Bsymbolic --no-undefined -soname=linux-vdso.so.1 \
-	    -z max-page-size=4096 -nostdlib -shared $(ldflags-y) \
+	    -z max-page-size=4096 -shared $(ldflags-y) \
 	    --hash-style=sysv --build-id=sha1 \
 	    -T
 
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index f2b5a4abef21..13aa8d955c46 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -10,6 +10,7 @@ config ARM64
 	select ACPI_SPCR_TABLE if ACPI
 	select ACPI_PPTT if ACPI
 	select ARCH_HAS_DEBUG_WX
+	select ARCH_BINFMT_ELF_EXTRA_PHDRS
 	select ARCH_BINFMT_ELF_STATE
 	select ARCH_CORRECT_STACKTRACE_ON_KRETPROBE
 	select ARCH_ENABLE_HUGEPAGE_MIGRATION if HUGETLB_PAGE && MIGRATION
@@ -18,6 +19,7 @@ config ARM64
 	select ARCH_ENABLE_SPLIT_PMD_PTLOCK if PGTABLE_LEVELS > 2
 	select ARCH_ENABLE_THP_MIGRATION if TRANSPARENT_HUGEPAGE
 	select ARCH_HAS_CACHE_LINE_SIZE
+	select ARCH_HAS_CURRENT_STACK_POINTER
 	select ARCH_HAS_DEBUG_VIRTUAL
 	select ARCH_HAS_DEBUG_VM_PGTABLE
 	select ARCH_HAS_DMA_PREP_COHERENT
@@ -192,6 +194,7 @@ config ARM64
 	select HAVE_PERF_EVENTS
 	select HAVE_PERF_REGS
 	select HAVE_PERF_USER_STACK_DUMP
+	select HAVE_PREEMPT_DYNAMIC_KEY
 	select HAVE_REGS_AND_STACK_ACCESS_API
 	select HAVE_POSIX_CPU_TIMERS_TASK_WORK
 	select HAVE_FUNCTION_ARG_ACCESS_API
@@ -672,6 +675,7 @@ config ARM64_WORKAROUND_TRBE_OVERWRITE_FILL_MODE
 
 config ARM64_ERRATUM_2051678
 	bool "Cortex-A510: 2051678: disable Hardware Update of the page table dirty bit"
+	default y
 	help
 	  This options adds the workaround for ARM Cortex-A510 erratum ARM64_ERRATUM_2051678.
 	  Affected Coretex-A510 might not respect the ordering rules for
@@ -680,6 +684,22 @@ config ARM64_ERRATUM_2051678
 
 	  If unsure, say Y.
 
+config ARM64_ERRATUM_2077057
+	bool "Cortex-A510: 2077057: workaround software-step corrupting SPSR_EL2"
+	help
+	  This option adds the workaround for ARM Cortex-A510 erratum 2077057.
+	  Affected Cortex-A510 may corrupt SPSR_EL2 when the a step exception is
+	  expected, but a Pointer Authentication trap is taken instead. The
+	  erratum causes SPSR_EL1 to be copied to SPSR_EL2, which could allow
+	  EL1 to cause a return to EL2 with a guest controlled ELR_EL2.
+
+	  This can only happen when EL2 is stepping EL1.
+
+	  When these conditions occur, the SPSR_EL2 value is unchanged from the
+	  previous guest entry, and can be restored from the in-memory copy.
+
+	  If unsure, say Y.
+
 config ARM64_ERRATUM_2119858
 	bool "Cortex-A710/X2: 2119858: workaround TRBE overwriting trace data in FILL mode"
 	default y
@@ -874,13 +894,17 @@ config CAVIUM_ERRATUM_23144
 	  If unsure, say Y.
 
 config CAVIUM_ERRATUM_23154
-	bool "Cavium erratum 23154: Access to ICC_IAR1_EL1 is not sync'ed"
+	bool "Cavium errata 23154 and 38545: GICv3 lacks HW synchronisation"
 	default y
 	help
-	  The gicv3 of ThunderX requires a modified version for
+	  The ThunderX GICv3 implementation requires a modified version for
 	  reading the IAR status to ensure data synchronization
 	  (access to icc_iar1_el1 is not sync'ed before and after).
 
+	  It also suffers from erratum 38545 (also present on Marvell's
+	  OcteonTX and OcteonTX2), resulting in deactivated interrupts being
+	  spuriously presented to the CPU interface.
+
 	  If unsure, say Y.
 
 config CAVIUM_ERRATUM_27456
@@ -1235,10 +1259,7 @@ config HW_PERF_EVENTS
 	def_bool y
 	depends on ARM_PMU
 
-config ARCH_HAS_FILTER_PGPROT
-	def_bool y
-
-# Supported by clang >= 7.0
+# Supported by clang >= 7.0 or GCC >= 12.0.0
 config CC_HAVE_SHADOW_CALL_STACK
 	def_bool $(cc-option, -fsanitize=shadow-call-stack -ffixed-x18)
 
@@ -1366,6 +1387,15 @@ config UNMAP_KERNEL_AT_EL0
 
 	  If unsure, say Y.
 
+config MITIGATE_SPECTRE_BRANCH_HISTORY
+	bool "Mitigate Spectre style attacks against branch history" if EXPERT
+	default y
+	help
+	  Speculation attacks against some high-performance processors can
+	  make use of branch history to influence future speculation.
+	  When taking an exception from user-space, a sequence of branches
+	  or a firmware call overwrites the branch history.
+
 config RODATA_FULL_DEFAULT_ENABLED
 	bool "Apply r/o permissions of VM areas also to their linear aliases"
 	default y
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 7d5d58800170..30b123cde02c 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -268,6 +268,12 @@ config ARCH_TEGRA
 	help
 	  This enables support for the NVIDIA Tegra SoC family.
 
+config ARCH_TESLA_FSD
+	bool "ARMv8 based Tesla platform"
+	depends on ARCH_EXYNOS
+	help
+	  Support for ARMv8 based Tesla platforms.
+
 config ARCH_SPRD
 	bool "Spreadtrum SoC platform"
 	help
@@ -309,9 +315,6 @@ config ARCH_VISCONTI
 	help
 	  This enables support for Toshiba Visconti SoCs Family.
 
-config ARCH_VULCAN
-	def_bool n
-
 config ARCH_XGENE
 	bool "AppliedMicro X-Gene SOC Family"
 	help
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index 639e01a4d855..1ba04e31a438 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -27,6 +27,7 @@ subdir-y += rockchip
 subdir-y += socionext
 subdir-y += sprd
 subdir-y += synaptics
+subdir-y += tesla
 subdir-y += ti
 subdir-y += toshiba
 subdir-y += xilinx
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
index 3ec301bd08a9..884bda106399 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
@@ -77,6 +77,16 @@
 		method = "smc";
 	};
 
+	/* Local timer */
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <1 13 0xf08>,
+			     <1 14 0xf08>,
+			     <1 11 0xf08>,
+			     <1 10 0xf08>;
+		interrupt-parent = <&intc>;
+	};
+
 	intc: interrupt-controller@fffc1000 {
 		compatible = "arm,gic-400", "arm,cortex-a15-gic";
 		#interrupt-cells = <3>;
@@ -286,7 +296,7 @@
 			status = "disabled";
 		};
 
-		mmc: dwmmc0@ff808000 {
+		mmc: mmc@ff808000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "altr,socfpga-dw-mshc";
@@ -323,7 +333,7 @@
 			reg = <0xffe00000 0x100000>;
 		};
 
-		pdma: pdma@ffda0000 {
+		pdma: dma-controller@ffda0000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0xffda0000 0x1000>;
 			interrupts = <0 81 4>,
@@ -406,15 +416,6 @@
 			reg = <0xffd12000 0x228>;
 		};
 
-		/* Local timer */
-		timer {
-			compatible = "arm,armv8-timer";
-			interrupts = <1 13 0xf08>,
-				     <1 14 0xf08>,
-				     <1 11 0xf08>,
-				     <1 10 0xf08>;
-		};
-
 		timer0: timer0@ffc03000 {
 			compatible = "snps,dw-apb-timer";
 			interrupts = <0 113 4>;
@@ -484,6 +485,7 @@
 			resets = <&rst USB0_RESET>, <&rst USB0_OCP_RESET>;
 			reset-names = "dwc2", "dwc2-ecc";
 			clocks = <&clkmgr STRATIX10_USB_CLK>;
+			clock-names = "otg";
 			iommus = <&smmu 6>;
 			status = "disabled";
 		};
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
index 46e558ab7729..5159cd5771dc 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
@@ -7,6 +7,7 @@
 
 / {
 	model = "SoCFPGA Stratix 10 SoCDK";
+	compatible = "altr,socfpga-stratix10-socdk", "altr,socfpga-stratix10";
 
 	aliases {
 		serial0 = &uart0;
@@ -43,7 +44,7 @@
 		reg = <0 0 0 0>;
 	};
 
-	ref_033v: 033-v-ref {
+	ref_033v: regulator-v-ref {
 		compatible = "regulator-fixed";
 		regulator-name = "0.33V";
 		regulator-min-microvolt = <330000>;
diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts
index bbc3db42d6e8..0ab676c639a1 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dts
@@ -7,6 +7,7 @@
 
 / {
 	model = "SoCFPGA Stratix 10 SoCDK";
+	compatible = "altr,socfpga-stratix10-socdk", "altr,socfpga-stratix10";
 
 	aliases {
 		serial0 = &uart0;
@@ -43,7 +44,7 @@
 		reg = <0 0 0 0>;
 	};
 
-	ref_033v: 033-v-ref {
+	ref_033v: regulator-v-ref {
 		compatible = "regulator-fixed";
 		regulator-name = "0.33V";
 		regulator-min-microvolt = <330000>;
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 5148cd9e5146..0eec18678311 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -36,6 +36,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-phicomm-n1.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-sml5442tw.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-vero4k-plus.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805x-p241.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-p281.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-tx3-mini.dtb
@@ -51,9 +52,15 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-libretech-pc.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-wetek-core2.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-a95xf3-air.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-a95xf3-air-gbit.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-bananapi-m5.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-h96-max.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-c4.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air-gbit.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-s4-s805x2-aq222.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 517519e6e87f..45947c1031c4 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -107,6 +107,12 @@
 			no-map;
 		};
 
+		/* 32 MiB reserved for ARM Trusted Firmware (BL32) */
+		secmon_reserved_bl32: secmon@5300000 {
+			reg = <0x0 0x05300000 0x0 0x2000000>;
+			no-map;
+		};
+
 		linux,cma {
 			compatible = "shared-dma-pool";
 			reusable;
@@ -839,6 +845,22 @@
 						};
 					};
 
+					pwm_f_z_pins: pwm-f-z {
+						mux {
+							groups = "pwm_f_z";
+							function = "pwm_f";
+							bias-disable;
+						};
+					};
+
+					pwm_f_a_pins: pwm-f-a {
+						mux {
+							groups = "pwm_f_a";
+							function = "pwm_f";
+							bias-disable;
+						};
+					};
+
 					pwm_f_x_pins: pwm-f-x {
 						mux {
 							groups = "pwm_f_x";
@@ -1881,6 +1903,33 @@
 						};
 					};
 
+					uart_ao_b_2_3_pins: uart-ao-b-2-3 {
+						mux {
+							groups = "uart_ao_b_tx_2",
+								 "uart_ao_b_rx_3";
+							function = "uart_ao_b";
+							bias-disable;
+						};
+					};
+
+					uart_ao_b_8_9_pins: uart-ao-b-8-9 {
+						mux {
+							groups = "uart_ao_b_tx_8",
+								 "uart_ao_b_rx_9";
+							function = "uart_ao_b";
+							bias-disable;
+						};
+					};
+
+					uart_ao_b_cts_rts_pins: uart-ao-b-cts-rts {
+						mux {
+							groups = "uart_ao_b_cts",
+								 "uart_ao_b_rts";
+							function = "uart_ao_b";
+							bias-disable;
+						};
+					};
+
 					pwm_a_e_pins: pwm-a-e {
 						mux {
 							groups = "pwm_a_e";
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
index d8838dde0f0f..4fb31c2ba31c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
@@ -157,14 +157,6 @@
 		regulator-always-on;
 	};
 
-	reserved-memory {
-		/* TEE Reserved Memory */
-		bl32_reserved: bl32@5000000 {
-			reg = <0x0 0x05300000 0x0 0x2000000>;
-			no-map;
-		};
-	};
-
 	sdio_pwrseq: sdio-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
index 3e968b244191..fd3fa82e4c33 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
@@ -17,7 +17,7 @@
 		rtc1 = &vrtc;
 	};
 
-	dioo2133: audio-amplifier-0 {
+	dio2133: audio-amplifier-0 {
 		compatible = "simple-audio-amplifier";
 		enable-gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
 		VCC-supply = <&vcc_5v>;
@@ -219,7 +219,7 @@
 		audio-widgets = "Line", "Lineout";
 		audio-aux-devs = <&tdmout_b>, <&tdmout_c>, <&tdmin_a>,
 				 <&tdmin_b>, <&tdmin_c>, <&tdmin_lb>,
-				 <&dioo2133>;
+				 <&dio2133>;
 		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
 				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index 6b457b2c30a4..aa14ea017a61 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -49,6 +49,12 @@
 			no-map;
 		};
 
+		/* 32 MiB reserved for ARM Trusted Firmware (BL32) */
+		secmon_reserved_bl32: secmon@5300000 {
+			reg = <0x0 0x05300000 0x0 0x2000000>;
+			no-map;
+		};
+
 		linux,cma {
 			compatible = "shared-dma-pool";
 			reusable;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-vero4k-plus.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-vero4k-plus.dts
new file mode 100644
index 000000000000..4b0ff707e21b
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-vero4k-plus.dts
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Author: Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxl-s905d.dtsi"
+#include "meson-gx-p23x-q20x.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "osmc,vero4k-plus", "amlogic,s905d", "amlogic,meson-gxl";
+	model = "OSMC Vero 4K Plus";
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+
+		button@0 {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-standby {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+			panic-indicator;
+		};
+	};
+};
+
+&ethmac {
+	pinctrl-0 = <&eth_pins>;
+	pinctrl-names = "default";
+
+	phy-mode = "rgmii-txid";
+	phy-handle = <&external_phy>;
+
+	amlogic,tx-delay-ns = <0>;
+};
+
+&external_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		pinctrl-0 = <&eth_phy_irq_pin>;
+		pinctrl-names = "default";
+
+		reg = <0>;
+		max-speed = <1000>;
+
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+
+		interrupt-parent = <&gpio_intc>;
+		interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&pinctrl_periphs {
+	/* Ensure the phy irq pin is properly configured as input */
+	eth_phy_irq_pin: eth-phy-irq {
+		mux {
+			groups = "GPIOZ_15";
+			function = "gpio_periphs";
+			bias-disable;
+			output-disable;
+		};
+	};
+};
+
+&sd_emmc_a {
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+	};
+};
+
+&usb {
+	dr_mode = "host";
+};
+
+&usb2_phy0 {
+	/* HDMI_5V also supplies the USB VBUS */
+	phy-supply = <&hdmi_5v>;
+};
+
+&usb2_phy0 {
+	/* HDMI_5V also supplies the USB VBUS */
+	phy-supply = <&hdmi_5v>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
new file mode 100644
index 000000000000..8ffbcb2b1ac5
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "meson-s4.dtsi"
+
+/ {
+	model = "Amlogic Meson S4 AQ222 Development Board";
+	compatible = "amlogic,aq222", "amlogic,s4";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart_B;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+};
+
+&uart_B {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
new file mode 100644
index 000000000000..bf9ae1e1016b
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2021 Amlogic, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35","arm,armv8";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35","arm,armv8";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35","arm,armv8";
+			reg = <0x0 0x2>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35","arm,armv8";
+			reg = <0x0 0x3>;
+			enable-method = "psci";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gic: interrupt-controller@fff01000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0xfff01000 0 0x1000>,
+			      <0x0 0xfff02000 0 0x2000>,
+			      <0x0 0xfff04000 0 0x2000>,
+			      <0x0 0xfff06000 0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		apb4: apb4@fe000000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xfe000000 0x0 0x480000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
+
+			uart_B: serial@7a000 {
+				compatible = "amlogic,meson-s4-uart",
+					     "amlogic,meson-ao-uart";
+				reg = <0x0 0x7a000 0x0 0x18>;
+				interrupts = <GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+				clocks = <&xtal>, <&xtal>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts
new file mode 100644
index 000000000000..d1debccdc1c2
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air-gbit.dts
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre SAS. All rights reserved.
+ * Copyright (c) 2020 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-sm1-ac2xx.dtsi"
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "cyx,a95xf3-air-gbit", "amlogic,sm1";
+	model = "Shenzhen CYX Industrial Co., Ltd A95XF3-AIR";
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "A95XF3-AIR";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+		status = "okay";
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-4 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&ethmac {
+	status = "okay";
+
+	pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+	phy-mode = "rgmii-txid";
+	phy-handle = <&external_phy>;
+
+	rx-internal-delay-ps = <800>;
+};
+
+&ext_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+		max-speed = <1000>;
+
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+
+		interrupt-parent = <&gpio_intc>;
+		/* MAC_INTR on GPIOZ_14 */
+		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts
new file mode 100644
index 000000000000..c94f2870b78b
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-a95xf3-air.dts
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre SAS. All rights reserved.
+ * Copyright (c) 2020 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-sm1-ac2xx.dtsi"
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "cyx,a95xf3-air", "amlogic,sm1";
+	model = "Shenzhen CYX Industrial Co., Ltd A95XF3-AIR";
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "A95XF3-AIR";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+		status = "okay";
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-4 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&ethmac {
+	status = "okay";
+	phy-handle = <&internal_ephy>;
+	phy-mode = "rmii";
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi
new file mode 100644
index 000000000000..46a34731f7e2
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-ac2xx.dtsi
@@ -0,0 +1,300 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre SAS. All rights reserved.
+ * Copyright (c) 2020 Christian Hewitt <christianshewitt@gmail.com>
+ *
+ * AC200/AC202 = S905D3
+ * AC213/AC214 = S905X3
+ *
+ */
+
+#include "meson-sm1.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x40000000>;
+	};
+
+	ao_5v: regulator-ao_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "AO_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_in>;
+		regulator-always-on;
+	};
+
+	dc_in: regulator-dc_in {
+		compatible = "regulator-fixed";
+		regulator-name = "DC_IN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	emmc_1v8: regulator-emmc_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "EMMC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	vddao_3v3: regulator-vddao_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_in>;
+		regulator-always-on;
+	};
+
+	vddcpu: regulator-vddcpu {
+		compatible = "pwm-regulator";
+
+		regulator-name = "VDDCPU";
+		regulator-min-microvolt = <690000>;
+		regulator-max-microvolt = <1050000>;
+
+		vin-supply = <&dc_in>;
+
+		pwms = <&pwm_AO_cd 1 1500 0>;
+		pwm-dutycycle-range = <100 0>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vddio_ao1v8: regulator-vddio_ao1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddao_3v3>;
+		regulator-always-on;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+};
+
+&cec_AO {
+	pinctrl-0 = <&cec_ao_a_h_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cecb_AO {
+	pinctrl-0 = <&cec_ao_b_h_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu1 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU1_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu2 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU2_CLK>;
+	clock-latency = <50000>;
+};
+
+&cpu3 {
+	cpu-supply = <&vddcpu>;
+	operating-points-v2 = <&cpu_opp_table>;
+	clocks = <&clkc CLKID_CPU3_CLK>;
+	clock-latency = <50000>;
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_AO_ab {
+	status = "okay";
+	pinctrl-0 = <&pwm_ao_a_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin0";
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_d_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin1";
+	status = "okay";
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&xtal>;
+	clock-names = "clkin0";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao1v8>;
+};
+
+/* SDIO */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	sd-uhs-sdr104;
+	max-frequency = <200000000>;
+
+	non-removable;
+	disable-wp;
+
+	/* WiFi firmware requires power to be kept while in suspend */
+	keep-power-in-suspend;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_ao1v8>;
+};
+
+/* SD Card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_c_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	/* CRC errors are observed at 50MHz */
+	max-frequency = <35000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddao_3v3>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&emmc_1v8>;
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "otg";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
index 212c6aa5a3b8..5751c48620ed 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
@@ -123,7 +123,7 @@
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <3300000>;
 
-		enable-gpio = <&gpio GPIOE_2 GPIO_ACTIVE_HIGH>;
+		enable-gpio = <&gpio_ao GPIOE_2 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 		regulator-always-on;
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts
new file mode 100644
index 000000000000..0f6660e68e72
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-h96-max.dts
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre SAS. All rights reserved.
+ * Copyright (c) 2020 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-sm1-ac2xx.dtsi"
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "haochuangyi,h96-max", "amlogic,sm1";
+	model = "Shenzhen Haochuangyi Technology Co., Ltd H96 Max";
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "H96-MAX";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+		status = "okay";
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-4 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&ethmac {
+	status = "okay";
+
+	pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+	phy-mode = "rgmii-txid";
+	phy-handle = <&external_phy>;
+
+	rx-internal-delay-ps = <800>;
+};
+
+&ext_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+		max-speed = <1000>;
+
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+
+		interrupt-parent = <&gpio_intc>;
+		/* MAC_INTR on GPIOZ_14 */
+		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
+
+&uart_A {
+	status = "okay";
+
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
index 0bd1e98a0eef..ddb1b345397f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
@@ -48,7 +48,7 @@
 		regulator-max-microvolt = <3300000>;
 		vin-supply = <&vcc_5v>;
 
-		enable-gpio = <&gpio GPIOE_2 GPIO_ACTIVE_HIGH>;
+		enable-gpio = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>;
 		enable-active-high;
 		regulator-always-on;
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
index 427475846fc7..a5d79f2f7c19 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
@@ -203,14 +203,6 @@
 		regulator-always-on;
 	};
 
-	reserved-memory {
-		/* TEE Reserved Memory */
-		bl32_reserved: bl32@5000000 {
-			reg = <0x0 0x05300000 0x0 0x2000000>;
-			no-map;
-		};
-	};
-
 	sdio_pwrseq: sdio-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts
new file mode 100644
index 000000000000..7e1a74046ba5
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air-gbit.dts
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre SAS. All rights reserved.
+ * Copyright (c) 2020 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-sm1-ac2xx.dtsi"
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "amediatech,x96-air-gbit", "amlogic,sm1";
+	model = "Shenzhen Amediatech Technology Co., Ltd X96 Air";
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "X96-AIR";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+		status = "okay";
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-4 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&ethmac {
+	status = "okay";
+
+	pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+	phy-mode = "rgmii-txid";
+	phy-handle = <&external_phy>;
+
+	rx-internal-delay-ps = <800>;
+};
+
+&ext_mdio {
+	external_phy: ethernet-phy@0 {
+		/* Realtek RTL8211F (0x001cc916) */
+		reg = <0>;
+		max-speed = <1000>;
+
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+
+		interrupt-parent = <&gpio_intc>;
+		/* MAC_INTR on GPIOZ_14 */
+		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&ir {
+	linux,rc-map-name = "rc-x96max";
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts
new file mode 100644
index 000000000000..cd93d798f2a3
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-x96-air.dts
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre SAS. All rights reserved.
+ * Copyright (c) 2020 Christian Hewitt <christianshewitt@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-sm1-ac2xx.dtsi"
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+	compatible = "amediatech,x96-air", "amlogic,sm1";
+	model = "Shenzhen Amediatech Technology Co., Ltd X96 Air";
+
+	sound {
+		compatible = "amlogic,axg-sound-card";
+		model = "X96-AIR";
+		audio-aux-devs = <&tdmout_b>;
+		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
+				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
+				"TDM_B Playback", "TDMOUT_B OUT";
+
+		assigned-clocks = <&clkc CLKID_MPLL2>,
+				  <&clkc CLKID_MPLL0>,
+				  <&clkc CLKID_MPLL1>;
+		assigned-clock-parents = <0>, <0>, <0>;
+		assigned-clock-rates = <294912000>,
+				       <270950400>,
+				       <393216000>;
+		status = "okay";
+
+		dai-link-0 {
+			sound-dai = <&frddr_a>;
+		};
+
+		dai-link-1 {
+			sound-dai = <&frddr_b>;
+		};
+
+		dai-link-2 {
+			sound-dai = <&frddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-3 {
+			sound-dai = <&tdmif_b>;
+			dai-format = "i2s";
+			dai-tdm-slot-tx-mask-0 = <1 1>;
+			dai-tdm-slot-tx-mask-1 = <1 1>;
+			dai-tdm-slot-tx-mask-2 = <1 1>;
+			dai-tdm-slot-tx-mask-3 = <1 1>;
+			mclk-fs = <256>;
+
+			codec {
+				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+			};
+		};
+
+		/* hdmi glue */
+		dai-link-4 {
+			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+			codec {
+				sound-dai = <&hdmi_tx>;
+			};
+		};
+	};
+};
+
+&arb {
+	status = "okay";
+};
+
+&clkc_audio {
+	status = "okay";
+};
+
+&ethmac {
+	status = "okay";
+	phy-handle = <&internal_ephy>;
+	phy-mode = "rmii";
+};
+
+&frddr_a {
+	status = "okay";
+};
+
+&frddr_b {
+	status = "okay";
+};
+
+&frddr_c {
+	status = "okay";
+};
+
+&ir {
+	linux,rc-map-name = "rc-beelink-gs1";
+};
+
+&tdmif_b {
+	status = "okay";
+};
+
+&tdmout_b {
+	status = "okay";
+};
+
+&tohdmitx {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
index 3d8b1f4f2001..3c07a89bfd27 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
@@ -356,6 +356,33 @@
 			status = "disabled";
 		};
 
+		spdifin: audio-controller@400 {
+			compatible = "amlogic,g12a-spdifin",
+				     "amlogic,axg-spdifin";
+			reg = <0x0 0x400 0x0 0x30>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "SPDIFIN";
+			interrupts = <GIC_SPI 151 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clkc_audio AUD_CLKID_SPDIFIN>,
+			<&clkc_audio AUD_CLKID_SPDIFIN_CLK>;
+			clock-names = "pclk", "refclk";
+			resets = <&clkc_audio AUD_RESET_SPDIFIN>;
+			status = "disabled";
+		};
+
+		spdifout_a: audio-controller@480 {
+			compatible = "amlogic,g12a-spdifout",
+				     "amlogic,axg-spdifout";
+			reg = <0x0 0x480 0x0 0x50>;
+			#sound-dai-cells = <0>;
+			sound-name-prefix = "SPDIFOUT_A";
+			clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>,
+			<&clkc_audio AUD_CLKID_SPDIFOUT_CLK>;
+			clock-names = "pclk", "mclk";
+			resets = <&clkc_audio AUD_RESET_SPDIFOUT>;
+			status = "disabled";
+		};
+
 		tdmout_a: audio-controller@500 {
 			compatible = "amlogic,sm1-tdmout";
 			reg = <0x0 0x500 0x0 0x40>;
diff --git a/arch/arm64/boot/dts/apple/t8103.dtsi b/arch/arm64/boot/dts/apple/t8103.dtsi
index 19afbc91020a..9f8f4145db88 100644
--- a/arch/arm64/boot/dts/apple/t8103.dtsi
+++ b/arch/arm64/boot/dts/apple/t8103.dtsi
@@ -97,6 +97,18 @@
 			     <AIC_FIQ AIC_TMR_HV_VIRT IRQ_TYPE_LEVEL_HIGH>;
 	};
 
+	pmu-e {
+		compatible = "apple,icestorm-pmu";
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_FIQ AIC_CPU_PMU_E IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pmu-p {
+		compatible = "apple,firestorm-pmu";
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_FIQ AIC_CPU_PMU_P IRQ_TYPE_LEVEL_HIGH>;
+	};
+
 	clkref: clock-ref {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -213,6 +225,18 @@
 			interrupt-controller;
 			reg = <0x2 0x3b100000 0x0 0x8000>;
 			power-domains = <&ps_aic>;
+
+			affinities {
+				e-core-pmu-affinity {
+					apple,fiq-index = <AIC_CPU_PMU_E>;
+					cpus = <&cpu0 &cpu1 &cpu2 &cpu3>;
+				};
+
+				p-core-pmu-affinity {
+					apple,fiq-index = <AIC_CPU_PMU_P>;
+					cpus = <&cpu4 &cpu5 &cpu6 &cpu7>;
+				};
+			};
 		};
 
 		pmgr: power-management@23b700000 {
diff --git a/arch/arm64/boot/dts/arm/Makefile b/arch/arm64/boot/dts/arm/Makefile
index 800da2e84f3f..4382b73baef5 100644
--- a/arch/arm64/boot/dts/arm/Makefile
+++ b/arch/arm64/boot/dts/arm/Makefile
@@ -2,7 +2,7 @@
 dtb-$(CONFIG_ARCH_VEXPRESS) += \
 	foundation-v8.dtb foundation-v8-psci.dtb \
 	foundation-v8-gicv3.dtb foundation-v8-gicv3-psci.dtb
-dtb-$(CONFIG_ARCH_VEXPRESS) += juno.dtb juno-r1.dtb juno-r2.dtb
+dtb-$(CONFIG_ARCH_VEXPRESS) += juno.dtb juno-r1.dtb juno-r2.dtb juno-scmi.dtb juno-r1-scmi.dtb juno-r2-scmi.dtb
 dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb
 dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2f-1xv7-ca53x2.dtb
 dtb-$(CONFIG_ARCH_VEXPRESS) += fvp-base-revc.dtb
diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
index 6288e104a089..446c8f476eec 100644
--- a/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -543,8 +543,7 @@
 			 <0x02000000 0x00 0x50000000 0x00 0x50000000 0x0 0x08000000>,
 			 <0x42000000 0x40 0x00000000 0x40 0x00000000 0x1 0x00000000>;
 		/* Standard AXI Translation entries as programmed by EDK2 */
-		dma-ranges = <0x02000000 0x0 0x2c1c0000 0x0 0x2c1c0000 0x0 0x00040000>,
-			     <0x02000000 0x0 0x80000000 0x0 0x80000000 0x0 0x80000000>,
+		dma-ranges = <0x02000000 0x0 0x80000000 0x0 0x80000000 0x0 0x80000000>,
 			     <0x43000000 0x8 0x00000000 0x8 0x00000000 0x2 0x00000000>;
 		#interrupt-cells = <1>;
 		interrupt-map-mask = <0 0 0 7>;
@@ -672,7 +671,7 @@
 		dma-coherent;
 	};
 
-	dma@7ff00000 {
+	dma-controller@7ff00000 {
 		compatible = "arm,pl330", "arm,primecell";
 		reg = <0x0 0x7ff00000 0 0x1000>;
 		#dma-cells = <1>;
diff --git a/arch/arm64/boot/dts/arm/juno-r1-scmi.dts b/arch/arm64/boot/dts/arm/juno-r1-scmi.dts
new file mode 100644
index 000000000000..190a0fba4ad6
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/juno-r1-scmi.dts
@@ -0,0 +1,23 @@
+#include "juno-r1.dts"
+#include "juno-scmi.dtsi"
+
+/ {
+	funnel@20130000 {
+		power-domains = <&scmi_devpd 8>;
+	};
+
+	etf@20140000 {
+		power-domains = <&scmi_devpd 0>;
+	};
+
+	funnel@20150000 {
+		power-domains = <&scmi_devpd 0>;
+	};
+};
+
+&A57_0 {
+	clocks = <&scmi_dvfs 0>;
+};
+&A57_1 {
+	clocks = <&scmi_dvfs 0>;
+};
diff --git a/arch/arm64/boot/dts/arm/juno-r2-scmi.dts b/arch/arm64/boot/dts/arm/juno-r2-scmi.dts
new file mode 100644
index 000000000000..dbf13770084f
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/juno-r2-scmi.dts
@@ -0,0 +1,23 @@
+#include "juno-r2.dts"
+#include "juno-scmi.dtsi"
+
+/ {
+	funnel@20130000 {
+		power-domains = <&scmi_devpd 8>;
+	};
+
+	etf@20140000 {
+		power-domains = <&scmi_devpd 0>;
+	};
+
+	funnel@20150000 {
+		power-domains = <&scmi_devpd 0>;
+	};
+};
+
+&A72_0 {
+	clocks = <&scmi_dvfs 0>;
+};
+&A72_1 {
+	clocks = <&scmi_dvfs 0>;
+};
diff --git a/arch/arm64/boot/dts/arm/juno-scmi.dts b/arch/arm64/boot/dts/arm/juno-scmi.dts
new file mode 100644
index 000000000000..41588fa46d31
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/juno-scmi.dts
@@ -0,0 +1,9 @@
+#include "juno.dts"
+#include "juno-scmi.dtsi"
+
+&A57_0 {
+	clocks = <&scmi_dvfs 0>;
+};
+&A57_1 {
+	clocks = <&scmi_dvfs 0>;
+};
diff --git a/arch/arm64/boot/dts/arm/juno-scmi.dtsi b/arch/arm64/boot/dts/arm/juno-scmi.dtsi
new file mode 100644
index 000000000000..d72dcff9bf06
--- /dev/null
+++ b/arch/arm64/boot/dts/arm/juno-scmi.dtsi
@@ -0,0 +1,199 @@
+/ {
+	etf@20010000 {
+		power-domains = <&scmi_devpd 8>;
+	};
+
+	tpiu@20030000 {
+		power-domains = <&scmi_devpd 8>;
+	};
+
+	funnel@20040000 {
+		power-domains = <&scmi_devpd 8>;
+	};
+
+	etr@20070000 {
+		power-domains = <&scmi_devpd 8>;
+	};
+
+	stm@20100000 {
+		power-domains = <&scmi_devpd 8>;
+	};
+
+	replicator@20120000 {
+		power-domains = <&scmi_devpd 8>;
+	};
+
+	funnel@220c0000 {
+		power-domains = <&scmi_devpd 8>;
+	};
+
+	funnel@230c0000 {
+		power-domains = <&scmi_devpd 8>;
+	};
+
+	hdlcd@7ff50000 {
+		clocks = <&scmi_clk 3>;
+	};
+
+	hdlcd@7ff60000 {
+		clocks = <&scmi_clk 3>;
+	};
+
+	/delete-node/ scpi;
+
+	firmware {
+		scmi {
+			compatible = "arm,scmi";
+			mbox-names = "tx", "rx";
+			mboxes = <&mailbox 0 0 &mailbox 0 1>;
+			shmem = <&cpu_scp_lpri0 &cpu_scp_lpri1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			scmi_devpd: protocol@11 {
+				reg = <0x11>;
+				#power-domain-cells = <1>;
+			};
+
+			scmi_dvfs: protocol@13 {
+				reg = <0x13>;
+				#clock-cells = <1>;
+				mbox-names = "tx", "rx";
+				mboxes = <&mailbox 1 0 &mailbox 1 1>;
+				shmem = <&cpu_scp_hpri0 &cpu_scp_hpri1>;
+			};
+
+			scmi_clk: protocol@14 {
+				reg = <0x14>;
+				#clock-cells = <1>;
+			};
+
+			scmi_sensors0: protocol@15 {
+				reg = <0x15>;
+				#thermal-sensor-cells = <1>;
+			};
+		};
+	};
+
+	thermal-zones {
+		pmic {
+			thermal-sensors = <&scmi_sensors0 0>;
+		};
+
+		soc {
+			thermal-sensors = <&scmi_sensors0 3>;
+		};
+
+		big-cluster {
+			thermal-sensors = <&scmi_sensors0 21>;
+		};
+
+		little-cluster {
+			thermal-sensors = <&scmi_sensors0 22>;
+		};
+
+		gpu0 {
+			thermal-sensors = <&scmi_sensors0 23>;
+		};
+
+		gpu1 {
+			thermal-sensors = <&scmi_sensors0 24>;
+		};
+	};
+
+};
+
+&A53_0 {
+	clocks = <&scmi_dvfs 1>;
+};
+&A53_1 {
+	clocks = <&scmi_dvfs 1>;
+};
+&A53_2 {
+	clocks = <&scmi_dvfs 1>;
+};
+&A53_3 {
+	clocks = <&scmi_dvfs 1>;
+};
+
+&cpu_debug0 {
+	power-domains = <&scmi_devpd 8>;
+};
+&cpu_debug1 {
+	power-domains = <&scmi_devpd 8>;
+};
+&cpu_debug2 {
+	power-domains = <&scmi_devpd 8>;
+};
+&cpu_debug3 {
+	power-domains = <&scmi_devpd 8>;
+};
+&cpu_debug4 {
+	power-domains = <&scmi_devpd 8>;
+};
+&cpu_debug5 {
+	power-domains = <&scmi_devpd 8>;
+};
+
+&etm0 {
+	power-domains = <&scmi_devpd 8>;
+};
+&etm1 {
+	power-domains = <&scmi_devpd 8>;
+};
+&etm2 {
+	power-domains = <&scmi_devpd 8>;
+};
+&etm3 {
+	power-domains = <&scmi_devpd 8>;
+};
+&etm4 {
+	power-domains = <&scmi_devpd 8>;
+};
+&etm5 {
+	power-domains = <&scmi_devpd 8>;
+};
+
+&gpu {
+	clocks = <&scmi_dvfs 2>;
+	power-domains = <&scmi_devpd 9>;
+};
+
+&mailbox {
+	compatible = "arm,mhu-doorbell", "arm,primecell";
+	#mbox-cells = <2>;
+	mbox-name = "ARM-MHU";
+};
+
+&smmu_etr {
+	power-domains = <&scmi_devpd 8>;
+};
+
+&smmu_gpu {
+	power-domains = <&scmi_devpd 9>;
+};
+
+&sram {
+	/delete-node/ scp-sram@0;
+	/delete-node/ scp-sram@200;
+
+	cpu_scp_lpri0: scp-sram@0 {
+		compatible = "arm,scmi-shmem";
+		reg = <0x0 0x80>;
+	};
+
+	cpu_scp_lpri1: scp-sram@80 {
+		compatible = "arm,scmi-shmem";
+		reg = <0x80 0x80>;
+	};
+
+	cpu_scp_hpri0: scp-sram@100 {
+		compatible = "arm,scmi-shmem";
+		reg = <0x100 0x80>;
+	};
+
+	cpu_scp_hpri1: scp-sram@180 {
+		compatible = "arm,scmi-shmem";
+		reg = <0x180 0x80>;
+	};
+};
diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile
index c6882032a428..5082fcd1fea5 100644
--- a/arch/arm64/boot/dts/broadcom/Makefile
+++ b/arch/arm64/boot/dts/broadcom/Makefile
@@ -5,7 +5,8 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-400.dtb \
 			      bcm2837-rpi-3-a-plus.dtb \
 			      bcm2837-rpi-3-b.dtb \
 			      bcm2837-rpi-3-b-plus.dtb \
-			      bcm2837-rpi-cm3-io3.dtb
+			      bcm2837-rpi-cm3-io3.dtb \
+			      bcm2837-rpi-zero-2-w.dtb
 
 subdir-y	+= bcm4908
 subdir-y	+= northstar2
diff --git a/arch/arm64/boot/dts/broadcom/bcm2837-rpi-zero-2-w.dts b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-zero-2-w.dts
new file mode 100644
index 000000000000..307ae693e4a0
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/bcm2837-rpi-zero-2-w.dts
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "arm/bcm2837-rpi-zero-2-w.dts"
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
index 984c737fa627..a4be040a00c0 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
@@ -273,9 +273,18 @@
 		#size-cells = <1>;
 		ranges = <0x00 0x00 0xff800000 0x3000>;
 
-		timer: timer@400 {
-			compatible = "brcm,bcm6328-timer", "syscon";
-			reg = <0x400 0x3c>;
+		twd: timer-mfd@400 {
+			compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon";
+			reg = <0x400 0x4c>;
+			ranges = <0x0 0x400 0x4c>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			watchdog@28 {
+				compatible = "brcm,bcm6345-wdt";
+				reg = <0x28 0x8>;
+			};
 		};
 
 		gpio0: gpio-controller@500 {
@@ -287,6 +296,141 @@
 			gpio-controller;
 		};
 
+		pinctrl@560 {
+			compatible = "brcm,bcm4908-pinctrl";
+			reg = <0x560 0x10>;
+
+			pins_led_0_a: led_0-a-pins {
+				function = "led_0";
+				groups = "led_0_grp_a";
+			};
+
+			pins_led_1_a: led_1-a-pins {
+				function = "led_1";
+				groups = "led_1_grp_a";
+			};
+
+			pins_led_2_a: led_2-a-pins {
+				function = "led_2";
+				groups = "led_2_grp_a";
+			};
+
+			pins_led_3_a: led_3-a-pins {
+				function = "led_3";
+				groups = "led_3_grp_a";
+			};
+
+			pins_led_4_a: led_4-a-pins {
+				function = "led_4";
+				groups = "led_4_grp_a";
+			};
+
+			pins_led_5_a: led_5-a-pins {
+				function = "led_5";
+				groups = "led_5_grp_a";
+			};
+
+			pins_led_6_a: led_6-a-pins {
+				function = "led_6";
+				groups = "led_6_grp_a";
+			};
+
+			pins_led_7_a: led_7-a-pins {
+				function = "led_7";
+				groups = "led_7_grp_a";
+			};
+
+			pins_led_8_a: led_8-a-pins {
+				function = "led_8";
+				groups = "led_8_grp_a";
+			};
+
+			pins_led_9_a: led_9-a-pins {
+				function = "led_9";
+				groups = "led_9_grp_a";
+			};
+
+			pins_led_21_a: led_21-a-pins {
+				function = "led_21";
+				groups = "led_21_grp_a";
+			};
+
+			pins_led_22_a: led_22-a-pins {
+				function = "led_22";
+				groups = "led_22_grp_a";
+			};
+
+			pins_led_26_a: led_26-a-pins {
+				function = "led_26";
+				groups = "led_26_grp_a";
+			};
+
+			pins_led_27_a: led_27-a-pins {
+				function = "led_27";
+				groups = "led_27_grp_a";
+			};
+
+			pins_led_28_a: led_28-a-pins {
+				function = "led_28";
+				groups = "led_28_grp_a";
+			};
+
+			pins_led_29_a: led_29-a-pins {
+				function = "led_29";
+				groups = "led_29_grp_a";
+			};
+
+			pins_led_30_a: led_30-a-pins {
+				function = "led_30";
+				groups = "led_30_grp_a";
+			};
+
+			pins_hs_uart: hs_uart-pins {
+				function = "hs_uart";
+				groups = "hs_uart_grp";
+			};
+
+			pins_i2c_a: i2c-a-pins {
+				function = "i2c";
+				groups = "i2c_grp_a";
+			};
+
+			pins_i2c_b: i2c-b-pins {
+				function = "i2c";
+				groups = "i2c_grp_b";
+			};
+
+			pins_i2s: i2s-pins {
+				function = "i2s";
+				groups = "i2s_grp";
+			};
+
+			pins_nand_ctrl: nand_ctrl-pins {
+				function = "nand_ctrl";
+				groups = "nand_ctrl_grp";
+			};
+
+			pins_nand_data: nand_data-pins {
+				function = "nand_data";
+				groups = "nand_data_grp";
+			};
+
+			pins_emmc_ctrl: emmc_ctrl-pins {
+				function = "emmc_ctrl";
+				groups = "emmc_ctrl_grp";
+			};
+
+			pins_usb0_pwr: usb0_pwr-pins {
+				function = "usb0_pwr";
+				groups = "usb0_pwr_grp";
+			};
+
+			pins_usb1_pwr: usb1_pwr-pins {
+				function = "usb1_pwr";
+				groups = "usb1_pwr_grp";
+			};
+		};
+
 		uart0: serial@640 {
 			compatible = "brcm,bcm6345-uart";
 			reg = <0x640 0x18>;
@@ -312,6 +456,15 @@
 			};
 		};
 
+		i2c@2100 {
+			compatible = "brcm,brcmper-i2c";
+			reg = <0x2100 0x58>;
+			clock-frequency = <97500>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pins_i2c_a>;
+			status = "disabled";
+		};
+
 		misc@2600 {
 			compatible = "brcm,misc", "simple-mfd";
 			reg = <0x2600 0xe4>;
@@ -330,7 +483,7 @@
 
 	reboot {
 		compatible = "syscon-reboot";
-		regmap = <&timer>;
+		regmap = <&twd>;
 		offset = <0x34>;
 		mask = <1>;
 	};
diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts b/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts
index ec19fbf928a1..12a4b1c03390 100644
--- a/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts
+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts
@@ -111,8 +111,8 @@
 		compatible = "silabs,si3226x";
 		reg = <0>;
 		spi-max-frequency = <5000000>;
-		spi-cpha = <1>;
-		spi-cpol = <1>;
+		spi-cpha;
+		spi-cpol;
 		pl022,hierarchy = <0>;
 		pl022,interface = <0>;
 		pl022,slave-tx-disable = <0>;
@@ -135,8 +135,8 @@
 		at25,byte-len = <0x8000>;
 		at25,addr-mode = <2>;
 		at25,page-size = <64>;
-		spi-cpha = <1>;
-		spi-cpol = <1>;
+		spi-cpha;
+		spi-cpol;
 		pl022,hierarchy = <0>;
 		pl022,interface = <0>;
 		pl022,slave-tx-disable = <0>;
diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
index 2cfeaf3b0a87..f59fa3979a04 100644
--- a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
@@ -276,7 +276,7 @@
 			mboxes = <&pdc3 0>;
 		};
 
-		dma0: dma@61360000 {
+		dma0: dma-controller@61360000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x61360000 0x1000>;
 			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
@@ -644,7 +644,7 @@
 			reg = <0x66180000 0x1000>;
 			interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&iprocslow>, <&iprocslow>;
-			clock-names = "spiclk", "apb_pclk";
+			clock-names = "sspclk", "apb_pclk";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -655,7 +655,7 @@
 			reg = <0x66190000 0x1000>;
 			interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&iprocslow>, <&iprocslow>;
-			clock-names = "spiclk", "apb_pclk";
+			clock-names = "sspclk", "apb_pclk";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -687,7 +687,7 @@
 			};
 		};
 
-		sata: ahci@663f2000 {
+		sata: sata@663f2000 {
 			compatible = "brcm,iproc-ahci", "generic-ahci";
 			reg = <0x663f2000 0x1000>;
 			dma-coherent;
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
index 7b04dfe67bef..7f1b8efd0883 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -519,7 +519,7 @@
 			reg = <0x00180000 0x1000>;
 			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&hsls_div2_clk>, <&hsls_div2_clk>;
-			clock-names = "spiclk", "apb_pclk";
+			clock-names = "sspclk", "apb_pclk";
 			num-cs = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -531,7 +531,7 @@
 			reg = <0x00190000 0x1000>;
 			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&hsls_div2_clk>, <&hsls_div2_clk>;
-			clock-names = "spiclk", "apb_pclk";
+			clock-names = "sspclk", "apb_pclk";
 			num-cs = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -543,7 +543,7 @@
 			reg = <0x00220000 0x28>;
 		};
 
-		dma0: dma@310000 {
+		dma0: dma-controller@310000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x00310000 0x1000>;
 			interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm64/boot/dts/exynos/Makefile b/arch/arm64/boot/dts/exynos/Makefile
index b41e86df0a84..6e4ba69268e5 100644
--- a/arch/arm64/boot/dts/exynos/Makefile
+++ b/arch/arm64/boot/dts/exynos/Makefile
@@ -1,6 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_EXYNOS) += \
-	exynos5433-tm2.dtb	\
-	exynos5433-tm2e.dtb	\
-	exynos7-espresso.dtb	\
+	exynos5433-tm2.dtb		\
+	exynos5433-tm2e.dtb		\
+	exynos7-espresso.dtb		\
+	exynos7885-jackpotlte.dtb	\
+	exynos850-e850-96.dtb		\
 	exynosautov9-sadk.dtb
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
index 32a6518517e5..4b46af3e164d 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi
@@ -11,16 +11,25 @@
 
 #include <dt-bindings/pinctrl/samsung.h>
 
-#define PIN(_func, _pin, _pull, _drv)					\
-	_pin {								\
+#define PIN(_pin, _func, _pull, _drv)					\
+	pin- ## _pin {							\
 		samsung,pins = #_pin;					\
 		samsung,pin-function = <EXYNOS_PIN_FUNC_ ##_func>;	\
 		samsung,pin-pud = <EXYNOS_PIN_PULL_ ##_pull>;		\
 		samsung,pin-drv = <EXYNOS5433_PIN_DRV_ ##_drv>;		\
 	}
 
+#define PIN_IN(_pin, _pull, _drv)					\
+	PIN(_pin, INPUT, _pull, _drv)
+
+#define PIN_OT(_pin, _pull, _drv)					\
+	PIN(_pin, OUTPUT, _pull, _drv)
+
+#define PIN_F2(_pin, _pull, _drv)					\
+	PIN(_pin, 2, _pull, _drv)
+
 &pinctrl_alive {
-	gpa0: gpa0 {
+	gpa0: gpa0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -37,7 +46,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpa1: gpa1 {
+	gpa1: gpa1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -54,7 +63,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpa2: gpa2 {
+	gpa2: gpa2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -62,7 +71,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpa3: gpa3 {
+	gpa3: gpa3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -70,7 +79,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf1: gpf1 {
+	gpf1: gpf1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -78,7 +87,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf2: gpf2 {
+	gpf2: gpf2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -86,7 +95,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf3: gpf3 {
+	gpf3: gpf3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -94,7 +103,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf4: gpf4 {
+	gpf4: gpf4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -102,7 +111,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf5: gpf5 {
+	gpf5: gpf5-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -112,7 +121,7 @@
 };
 
 &pinctrl_aud {
-	gpz0: gpz0 {
+	gpz0: gpz0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -120,7 +129,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpz1: gpz1 {
+	gpz1: gpz1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -128,7 +137,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	i2s0_bus: i2s0-bus {
+	i2s0_bus: i2s0-bus-pins {
 		samsung,pins = "gpz0-0", "gpz0-1", "gpz0-2", "gpz0-3",
 				"gpz0-4", "gpz0-5", "gpz0-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -136,14 +145,14 @@
 		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
 	};
 
-	pcm0_bus: pcm0-bus {
+	pcm0_bus: pcm0-bus-pins {
 		samsung,pins = "gpz1-0", "gpz1-1", "gpz1-2", "gpz1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
 	};
 
-	uart_aud_bus: uart-aud-bus {
+	uart_aud_bus: uart-aud-bus-pins {
 		samsung,pins = "gpz1-3", "gpz1-2", "gpz1-1", "gpz1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -152,7 +161,7 @@
 };
 
 &pinctrl_cpif {
-	gpv6: gpv6 {
+	gpv6: gpv6-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -162,7 +171,7 @@
 };
 
 &pinctrl_ese {
-	gpj2: gpj2 {
+	gpj2: gpj2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -172,7 +181,7 @@
 };
 
 &pinctrl_finger {
-	gpd5: gpd5 {
+	gpd5: gpd5-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -180,14 +189,14 @@
 		#interrupt-cells = <2>;
 	};
 
-	spi2_bus: spi2-bus {
+	spi2_bus: spi2-bus-pins {
 		samsung,pins = "gpd5-0", "gpd5-2", "gpd5-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
 	};
 
-	hs_i2c6_bus: hs-i2c6-bus {
+	hs_i2c6_bus: hs-i2c6-bus-pins {
 		samsung,pins = "gpd5-3", "gpd5-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
@@ -196,7 +205,7 @@
 };
 
 &pinctrl_fsys {
-	gph1: gph1 {
+	gph1: gph1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -204,7 +213,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpr4: gpr4 {
+	gpr4: gpr4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -212,7 +221,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpr0: gpr0 {
+	gpr0: gpr0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -220,7 +229,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpr1: gpr1 {
+	gpr1: gpr1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -228,7 +237,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpr2: gpr2 {
+	gpr2: gpr2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -236,7 +245,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpr3: gpr3 {
+	gpr3: gpr3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -244,139 +253,139 @@
 		#interrupt-cells = <2>;
 	};
 
-	sd0_clk: sd0-clk {
+	sd0_clk: sd0-clk-pins {
 		samsung,pins = "gpr0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
 	};
 
-	sd0_cmd: sd0-cmd {
+	sd0_cmd: sd0-cmd-pins {
 		samsung,pins = "gpr0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
 	};
 
-	sd0_rdqs: sd0-rdqs {
+	sd0_rdqs: sd0-rdqs-pins {
 		samsung,pins = "gpr0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
 	};
 
-	sd0_qrdy: sd0-qrdy {
+	sd0_qrdy: sd0-qrdy-pins {
 		samsung,pins = "gpr0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
 	};
 
-	sd0_bus1: sd0-bus-width1 {
+	sd0_bus1: sd0-bus-width1-pins {
 		samsung,pins = "gpr1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
 	};
 
-	sd0_bus4: sd0-bus-width4 {
+	sd0_bus4: sd0-bus-width4-pins {
 		samsung,pins = "gpr1-1", "gpr1-2", "gpr1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
 	};
 
-	sd0_bus8: sd0-bus-width8 {
+	sd0_bus8: sd0-bus-width8-pins {
 		samsung,pins = "gpr1-4", "gpr1-5", "gpr1-6", "gpr1-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
 	};
 
-	sd1_clk: sd1-clk {
+	sd1_clk: sd1-clk-pins {
 		samsung,pins = "gpr2-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
 	};
 
-	sd1_cmd: sd1-cmd {
+	sd1_cmd: sd1-cmd-pins {
 		samsung,pins = "gpr2-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
 	};
 
-	sd1_bus1: sd1-bus-width1 {
+	sd1_bus1: sd1-bus-width1-pins {
 		samsung,pins = "gpr3-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
 	};
 
-	sd1_bus4: sd1-bus-width4 {
+	sd1_bus4: sd1-bus-width4-pins {
 		samsung,pins = "gpr3-1", "gpr3-2", "gpr3-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
 	};
 
-	sd1_bus8: sd1-bus-width8 {
+	sd1_bus8: sd1-bus-width8-pins {
 		samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
 	};
 
-	pcie_bus: pcie_bus {
+	pcie_bus: pcie-bus-pins {
 		samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 	};
 
-	sd2_clk: sd2-clk {
+	sd2_clk: sd2-clk-pins {
 		samsung,pins = "gpr4-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
 	};
 
-	sd2_cmd: sd2-cmd {
+	sd2_cmd: sd2-cmd-pins {
 		samsung,pins = "gpr4-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
 	};
 
-	sd2_cd: sd2-cd {
+	sd2_cd: sd2-cd-pins {
 		samsung,pins = "gpr4-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
 	};
 
-	sd2_bus1: sd2-bus-width1 {
+	sd2_bus1: sd2-bus-width1-pins {
 		samsung,pins = "gpr4-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
 	};
 
-	sd2_bus4: sd2-bus-width4 {
+	sd2_bus4: sd2-bus-width4-pins {
 		samsung,pins = "gpr4-4", "gpr4-5", "gpr4-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
 	};
 
-	sd2_clk_output: sd2-clk-output {
+	sd2_clk_output: sd2-clk-output-pins {
 		samsung,pins = "gpr4-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR3>;
 	};
 
-	sd2_cmd_output: sd2-cmd-output {
+	sd2_cmd_output: sd2-cmd-output-pins {
 		samsung,pins = "gpr4-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -385,7 +394,7 @@
 };
 
 &pinctrl_imem {
-	gpf0: gpf0 {
+	gpf0: gpf0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -395,7 +404,7 @@
 };
 
 &pinctrl_nfc {
-	gpj0: gpj0 {
+	gpj0: gpj0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -403,7 +412,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	hs_i2c4_bus: hs-i2c4-bus {
+	hs_i2c4_bus: hs-i2c4-bus-pins {
 		samsung,pins = "gpj0-1", "gpj0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
@@ -412,7 +421,7 @@
 };
 
 &pinctrl_peric {
-	gpv7: gpv7 {
+	gpv7: gpv7-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -420,7 +429,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb0: gpb0 {
+	gpb0: gpb0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -428,7 +437,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc0: gpc0 {
+	gpc0: gpc0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -436,7 +445,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc1: gpc1 {
+	gpc1: gpc1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -444,7 +453,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc2: gpc2 {
+	gpc2: gpc2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -452,7 +461,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc3: gpc3 {
+	gpc3: gpc3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -460,7 +469,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpg0: gpg0 {
+	gpg0: gpg0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -468,7 +477,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd0: gpd0 {
+	gpd0: gpd0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -476,7 +485,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd1: gpd1 {
+	gpd1: gpd1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -484,7 +493,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd2: gpd2 {
+	gpd2: gpd2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -492,7 +501,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd4: gpd4 {
+	gpd4: gpd4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -500,7 +509,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd8: gpd8 {
+	gpd8: gpd8-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -508,7 +517,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd6: gpd6 {
+	gpd6: gpd6-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -516,7 +525,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd7: gpd7 {
+	gpd7: gpd7-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -524,7 +533,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpg1: gpg1 {
+	gpg1: gpg1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -532,7 +541,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpg2: gpg2 {
+	gpg2: gpg2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -540,7 +549,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpg3: gpg3 {
+	gpg3: gpg3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -548,21 +557,21 @@
 		#interrupt-cells = <2>;
 	};
 
-	hs_i2c8_bus: hs-i2c8-bus {
+	hs_i2c8_bus: hs-i2c8-bus-pins {
 		samsung,pins = "gpb0-1", "gpb0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
 	};
 
-	hs_i2c9_bus: hs-i2c9-bus {
+	hs_i2c9_bus: hs-i2c9-bus-pins {
 		samsung,pins = "gpb0-3", "gpb0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
 	};
 
-	i2s1_bus: i2s1-bus {
+	i2s1_bus: i2s1-bus-pins {
 		samsung,pins = "gpd4-0", "gpd4-1", "gpd4-2",
 				"gpd4-3", "gpd4-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
@@ -570,7 +579,7 @@
 		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
 	};
 
-	pcm1_bus: pcm1-bus {
+	pcm1_bus: pcm1-bus-pins {
 		samsung,pins = "gpd4-0", "gpd4-1", "gpd4-2",
 				"gpd4-3", "gpd4-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
@@ -578,193 +587,193 @@
 		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
 	};
 
-	spdif_bus: spdif-bus {
+	spdif_bus: spdif-bus-pins {
 		samsung,pins = "gpd4-3", "gpd4-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
 	};
 
-	fimc_is_spi_pin0: fimc-is-spi-pin0 {
+	fimc_is_spi_pin0: fimc-is-spi-pin0-pins {
 		samsung,pins = "gpc3-3", "gpc3-2", "gpc3-1", "gpc3-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
 	};
 
-	fimc_is_spi_pin1: fimc-is-spi-pin1 {
+	fimc_is_spi_pin1: fimc-is-spi-pin1-pins {
 		samsung,pins = "gpc3-7", "gpc3-6", "gpc3-5", "gpc3-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
 	};
 
-	uart0_bus: uart0-bus {
+	uart0_bus: uart0-bus-pins {
 		samsung,pins = "gpd0-3", "gpd0-2", "gpd0-1", "gpd0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	hs_i2c2_bus: hs-i2c2-bus {
+	hs_i2c2_bus: hs-i2c2-bus-pins {
 		samsung,pins = "gpd0-3", "gpd0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
 	};
 
-	uart2_bus: uart2-bus {
+	uart2_bus: uart2-bus-pins {
 		samsung,pins = "gpd1-5", "gpd1-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	uart1_bus: uart1-bus {
+	uart1_bus: uart1-bus-pins {
 		samsung,pins = "gpd1-3", "gpd1-2", "gpd1-1", "gpd1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	hs_i2c3_bus: hs-i2c3-bus {
+	hs_i2c3_bus: hs-i2c3-bus-pins {
 		samsung,pins = "gpd1-3", "gpd1-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
 	};
 
-	hs_i2c0_bus: hs-i2c0-bus {
+	hs_i2c0_bus: hs-i2c0-bus-pins {
 		samsung,pins = "gpd2-1", "gpd2-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
 	};
 
-	hs_i2c1_bus: hs-i2c1-bus {
+	hs_i2c1_bus: hs-i2c1-bus-pins {
 		samsung,pins = "gpd2-3", "gpd2-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
 	};
 
-	pwm0_out: pwm0-out {
+	pwm0_out: pwm0-out-pins {
 		samsung,pins = "gpd2-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
 	};
 
-	pwm1_out: pwm1-out {
+	pwm1_out: pwm1-out-pins {
 		samsung,pins = "gpd2-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
 	};
 
-	pwm2_out: pwm2-out {
+	pwm2_out: pwm2-out-pins {
 		samsung,pins = "gpd2-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
 	};
 
-	pwm3_out: pwm3-out {
+	pwm3_out: pwm3-out-pins {
 		samsung,pins = "gpd2-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
 	};
 
-	spi1_bus: spi1-bus {
+	spi1_bus: spi1-bus-pins {
 		samsung,pins = "gpd6-2", "gpd6-4", "gpd6-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
 	};
 
-	hs_i2c7_bus: hs-i2c7-bus {
+	hs_i2c7_bus: hs-i2c7-bus-pins {
 		samsung,pins = "gpd2-7", "gpd2-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
 	};
 
-	spi0_bus: spi0-bus {
+	spi0_bus: spi0-bus-pins {
 		samsung,pins = "gpd8-0", "gpd6-0", "gpd6-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
 	};
 
-	hs_i2c10_bus: hs-i2c10-bus {
+	hs_i2c10_bus: hs-i2c10-bus-pins {
 		samsung,pins = "gpg3-1", "gpg3-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
 	};
 
-	hs_i2c11_bus: hs-i2c11-bus {
+	hs_i2c11_bus: hs-i2c11-bus-pins {
 		samsung,pins = "gpg3-3", "gpg3-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
 	};
 
-	spi3_bus: spi3-bus {
+	spi3_bus: spi3-bus-pins {
 		samsung,pins = "gpg3-4", "gpg3-6", "gpg3-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
 	};
 
-	spi4_bus: spi4-bus {
+	spi4_bus: spi4-bus-pins {
 		samsung,pins = "gpv7-1", "gpv7-3", "gpv7-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
 	};
 
-	fimc_is_uart: fimc-is-uart {
+	fimc_is_uart: fimc-is-uart-pins {
 		samsung,pins = "gpc1-1", "gpc0-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
 	};
 
-	fimc_is_ch0_i2c: fimc-is-ch0_i2c {
+	fimc_is_ch0_i2c: fimc-is-ch0-i2c-pins {
 		samsung,pins = "gpc2-1", "gpc2-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
 	};
 
-	fimc_is_ch0_mclk: fimc-is-ch0_mclk {
+	fimc_is_ch0_mclk: fimc-is-ch0-mclk-pins {
 		samsung,pins = "gpd7-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
 	};
 
-	fimc_is_ch1_i2c: fimc-is-ch1-i2c {
+	fimc_is_ch1_i2c: fimc-is-ch1-i2c-pins {
 		samsung,pins = "gpc2-3", "gpc2-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
 	};
 
-	fimc_is_ch1_mclk: fimc-is-ch1-mclk {
+	fimc_is_ch1_mclk: fimc-is-ch1-mclk-pins {
 		samsung,pins = "gpd7-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
 	};
 
-	fimc_is_ch2_i2c: fimc-is-ch2-i2c {
+	fimc_is_ch2_i2c: fimc-is-ch2-i2c-pins {
 		samsung,pins = "gpc2-5", "gpc2-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR1>;
 	};
 
-	fimc_is_ch2_mclk: fimc-is-ch2-mclk {
+	fimc_is_ch2_mclk: fimc-is-ch2-mclk-pins {
 		samsung,pins = "gpd7-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -773,7 +782,7 @@
 };
 
 &pinctrl_touch {
-	gpj1: gpj1 {
+	gpj1: gpj1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -781,7 +790,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	hs_i2c5_bus: hs-i2c5-bus {
+	hs_i2c5_bus: hs-i2c5-bus-pins {
 		samsung,pins = "gpj1-1", "gpj1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
index cbcc01a66aab..91c9bd1b47dd 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -858,10 +858,10 @@
 		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
 		reg = <0x66>;
 
-		muic: max77843-muic {
+		muic: extcon {
 			compatible = "maxim,max77843-muic";
 
-			musb_con: musb-connector {
+			musb_con: connector {
 				compatible = "samsung,usb-connector-11pin",
 					     "usb-b-connector";
 				label = "micro-USB";
@@ -871,6 +871,17 @@
 					#address-cells = <1>;
 					#size-cells = <0>;
 
+					port@0 {
+						/*
+						 * TODO: The DTS this is based on does not have
+						 * port@0 which is a required property. The ports
+						 * look incomplete and need fixing.
+						 * Add a disabled port just to satisfy dtschema.
+						 */
+						reg = <0>;
+						status = "disabled";
+					};
+
 					port@3 {
 						reg = <3>;
 						musb_con_to_mhl: endpoint {
@@ -910,7 +921,7 @@
 			};
 		};
 
-		haptic: max77843-haptic {
+		haptic: motor-driver {
 			compatible = "maxim,max77843-haptic";
 			haptic-supply = <&ldo38_reg>;
 			pwms = <&pwm 0 33670 0>;
@@ -1011,80 +1022,80 @@
 	pinctrl-0 = <&initial_alive>;
 
 	initial_alive: initial-state {
-		PIN(INPUT, gpa0-0, DOWN, FAST_SR1);
-		PIN(INPUT, gpa0-1, NONE, FAST_SR1);
-		PIN(INPUT, gpa0-2, DOWN, FAST_SR1);
-		PIN(INPUT, gpa0-3, NONE, FAST_SR1);
-		PIN(INPUT, gpa0-4, NONE, FAST_SR1);
-		PIN(INPUT, gpa0-5, DOWN, FAST_SR1);
-		PIN(INPUT, gpa0-6, NONE, FAST_SR1);
-		PIN(INPUT, gpa0-7, NONE, FAST_SR1);
-
-		PIN(INPUT, gpa1-0, UP, FAST_SR1);
-		PIN(INPUT, gpa1-1, UP, FAST_SR1);
-		PIN(INPUT, gpa1-2, NONE, FAST_SR1);
-		PIN(INPUT, gpa1-3, DOWN, FAST_SR1);
-		PIN(INPUT, gpa1-4, DOWN, FAST_SR1);
-		PIN(INPUT, gpa1-5, NONE, FAST_SR1);
-		PIN(INPUT, gpa1-6, NONE, FAST_SR1);
-		PIN(INPUT, gpa1-7, NONE, FAST_SR1);
-
-		PIN(INPUT, gpa2-0, NONE, FAST_SR1);
-		PIN(INPUT, gpa2-1, NONE, FAST_SR1);
-		PIN(INPUT, gpa2-2, NONE, FAST_SR1);
-		PIN(INPUT, gpa2-3, DOWN, FAST_SR1);
-		PIN(INPUT, gpa2-4, NONE, FAST_SR1);
-		PIN(INPUT, gpa2-5, DOWN, FAST_SR1);
-		PIN(INPUT, gpa2-6, DOWN, FAST_SR1);
-		PIN(INPUT, gpa2-7, NONE, FAST_SR1);
-
-		PIN(INPUT, gpa3-0, DOWN, FAST_SR1);
-		PIN(INPUT, gpa3-1, DOWN, FAST_SR1);
-		PIN(INPUT, gpa3-2, NONE, FAST_SR1);
-		PIN(INPUT, gpa3-3, DOWN, FAST_SR1);
-		PIN(INPUT, gpa3-4, NONE, FAST_SR1);
-		PIN(INPUT, gpa3-5, DOWN, FAST_SR1);
-		PIN(INPUT, gpa3-6, DOWN, FAST_SR1);
-		PIN(INPUT, gpa3-7, DOWN, FAST_SR1);
-
-		PIN(INPUT, gpf1-0, NONE, FAST_SR1);
-		PIN(INPUT, gpf1-1, NONE, FAST_SR1);
-		PIN(INPUT, gpf1-2, DOWN, FAST_SR1);
-		PIN(INPUT, gpf1-4, UP, FAST_SR1);
-		PIN(OUTPUT, gpf1-5, NONE, FAST_SR1);
-		PIN(INPUT, gpf1-6, DOWN, FAST_SR1);
-		PIN(INPUT, gpf1-7, DOWN, FAST_SR1);
-
-		PIN(INPUT, gpf2-0, DOWN, FAST_SR1);
-		PIN(INPUT, gpf2-1, DOWN, FAST_SR1);
-		PIN(INPUT, gpf2-2, DOWN, FAST_SR1);
-		PIN(INPUT, gpf2-3, DOWN, FAST_SR1);
-
-		PIN(INPUT, gpf3-0, DOWN, FAST_SR1);
-		PIN(INPUT, gpf3-1, DOWN, FAST_SR1);
-		PIN(INPUT, gpf3-2, NONE, FAST_SR1);
-		PIN(INPUT, gpf3-3, DOWN, FAST_SR1);
-
-		PIN(INPUT, gpf4-0, DOWN, FAST_SR1);
-		PIN(INPUT, gpf4-1, DOWN, FAST_SR1);
-		PIN(INPUT, gpf4-2, DOWN, FAST_SR1);
-		PIN(INPUT, gpf4-3, DOWN, FAST_SR1);
-		PIN(INPUT, gpf4-4, DOWN, FAST_SR1);
-		PIN(INPUT, gpf4-5, DOWN, FAST_SR1);
-		PIN(INPUT, gpf4-6, DOWN, FAST_SR1);
-		PIN(INPUT, gpf4-7, DOWN, FAST_SR1);
-
-		PIN(INPUT, gpf5-0, DOWN, FAST_SR1);
-		PIN(INPUT, gpf5-1, DOWN, FAST_SR1);
-		PIN(INPUT, gpf5-2, DOWN, FAST_SR1);
-		PIN(INPUT, gpf5-3, DOWN, FAST_SR1);
-		PIN(OUTPUT, gpf5-4, NONE, FAST_SR1);
-		PIN(INPUT, gpf5-5, DOWN, FAST_SR1);
-		PIN(INPUT, gpf5-6, DOWN, FAST_SR1);
-		PIN(INPUT, gpf5-7, DOWN, FAST_SR1);
+		PIN_IN(gpa0-0, DOWN, FAST_SR1);
+		PIN_IN(gpa0-1, NONE, FAST_SR1);
+		PIN_IN(gpa0-2, DOWN, FAST_SR1);
+		PIN_IN(gpa0-3, NONE, FAST_SR1);
+		PIN_IN(gpa0-4, NONE, FAST_SR1);
+		PIN_IN(gpa0-5, DOWN, FAST_SR1);
+		PIN_IN(gpa0-6, NONE, FAST_SR1);
+		PIN_IN(gpa0-7, NONE, FAST_SR1);
+
+		PIN_IN(gpa1-0, UP, FAST_SR1);
+		PIN_IN(gpa1-1, UP, FAST_SR1);
+		PIN_IN(gpa1-2, NONE, FAST_SR1);
+		PIN_IN(gpa1-3, DOWN, FAST_SR1);
+		PIN_IN(gpa1-4, DOWN, FAST_SR1);
+		PIN_IN(gpa1-5, NONE, FAST_SR1);
+		PIN_IN(gpa1-6, NONE, FAST_SR1);
+		PIN_IN(gpa1-7, NONE, FAST_SR1);
+
+		PIN_IN(gpa2-0, NONE, FAST_SR1);
+		PIN_IN(gpa2-1, NONE, FAST_SR1);
+		PIN_IN(gpa2-2, NONE, FAST_SR1);
+		PIN_IN(gpa2-3, DOWN, FAST_SR1);
+		PIN_IN(gpa2-4, NONE, FAST_SR1);
+		PIN_IN(gpa2-5, DOWN, FAST_SR1);
+		PIN_IN(gpa2-6, DOWN, FAST_SR1);
+		PIN_IN(gpa2-7, NONE, FAST_SR1);
+
+		PIN_IN(gpa3-0, DOWN, FAST_SR1);
+		PIN_IN(gpa3-1, DOWN, FAST_SR1);
+		PIN_IN(gpa3-2, NONE, FAST_SR1);
+		PIN_IN(gpa3-3, DOWN, FAST_SR1);
+		PIN_IN(gpa3-4, NONE, FAST_SR1);
+		PIN_IN(gpa3-5, DOWN, FAST_SR1);
+		PIN_IN(gpa3-6, DOWN, FAST_SR1);
+		PIN_IN(gpa3-7, DOWN, FAST_SR1);
+
+		PIN_IN(gpf1-0, NONE, FAST_SR1);
+		PIN_IN(gpf1-1, NONE, FAST_SR1);
+		PIN_IN(gpf1-2, DOWN, FAST_SR1);
+		PIN_IN(gpf1-4, UP, FAST_SR1);
+		PIN_OT(gpf1-5, NONE, FAST_SR1);
+		PIN_IN(gpf1-6, DOWN, FAST_SR1);
+		PIN_IN(gpf1-7, DOWN, FAST_SR1);
+
+		PIN_IN(gpf2-0, DOWN, FAST_SR1);
+		PIN_IN(gpf2-1, DOWN, FAST_SR1);
+		PIN_IN(gpf2-2, DOWN, FAST_SR1);
+		PIN_IN(gpf2-3, DOWN, FAST_SR1);
+
+		PIN_IN(gpf3-0, DOWN, FAST_SR1);
+		PIN_IN(gpf3-1, DOWN, FAST_SR1);
+		PIN_IN(gpf3-2, NONE, FAST_SR1);
+		PIN_IN(gpf3-3, DOWN, FAST_SR1);
+
+		PIN_IN(gpf4-0, DOWN, FAST_SR1);
+		PIN_IN(gpf4-1, DOWN, FAST_SR1);
+		PIN_IN(gpf4-2, DOWN, FAST_SR1);
+		PIN_IN(gpf4-3, DOWN, FAST_SR1);
+		PIN_IN(gpf4-4, DOWN, FAST_SR1);
+		PIN_IN(gpf4-5, DOWN, FAST_SR1);
+		PIN_IN(gpf4-6, DOWN, FAST_SR1);
+		PIN_IN(gpf4-7, DOWN, FAST_SR1);
+
+		PIN_IN(gpf5-0, DOWN, FAST_SR1);
+		PIN_IN(gpf5-1, DOWN, FAST_SR1);
+		PIN_IN(gpf5-2, DOWN, FAST_SR1);
+		PIN_IN(gpf5-3, DOWN, FAST_SR1);
+		PIN_OT(gpf5-4, NONE, FAST_SR1);
+		PIN_IN(gpf5-5, DOWN, FAST_SR1);
+		PIN_IN(gpf5-6, DOWN, FAST_SR1);
+		PIN_IN(gpf5-7, DOWN, FAST_SR1);
 	};
 
-	te_irq: te-irq {
+	te_irq: te-irq-pins {
 		samsung,pins = "gpf1-3";
 		samsung,pin-function = <0xf>;
 	};
@@ -1095,8 +1106,8 @@
 	pinctrl-0 = <&initial_cpif>;
 
 	initial_cpif: initial-state {
-		PIN(INPUT, gpv6-0, DOWN, FAST_SR1);
-		PIN(INPUT, gpv6-1, DOWN, FAST_SR1);
+		PIN_IN(gpv6-0, DOWN, FAST_SR1);
+		PIN_IN(gpv6-1, DOWN, FAST_SR1);
 	};
 };
 
@@ -1104,13 +1115,16 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&initial_ese>;
 
-	pcie_wlanen: pcie-wlanen {
-		PIN(INPUT, gpj2-0, UP, FAST_SR4);
+	pcie_wlanen: pcie-wlanen-pins {
+		samsung,pins = "gpj2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5433_PIN_DRV_FAST_SR4>;
 	};
 
 	initial_ese: initial-state {
-		PIN(INPUT, gpj2-1, DOWN, FAST_SR1);
-		PIN(INPUT, gpj2-2, DOWN, FAST_SR1);
+		PIN_IN(gpj2-1, DOWN, FAST_SR1);
+		PIN_IN(gpj2-2, DOWN, FAST_SR1);
 	};
 };
 
@@ -1119,11 +1133,11 @@
 	pinctrl-0 = <&initial_fsys>;
 
 	initial_fsys: initial-state {
-		PIN(INPUT, gpr3-0, NONE, FAST_SR1);
-		PIN(INPUT, gpr3-1, DOWN, FAST_SR1);
-		PIN(INPUT, gpr3-2, DOWN, FAST_SR1);
-		PIN(INPUT, gpr3-3, DOWN, FAST_SR1);
-		PIN(INPUT, gpr3-7, NONE, FAST_SR1);
+		PIN_IN(gpr3-0, NONE, FAST_SR1);
+		PIN_IN(gpr3-1, DOWN, FAST_SR1);
+		PIN_IN(gpr3-2, DOWN, FAST_SR1);
+		PIN_IN(gpr3-3, DOWN, FAST_SR1);
+		PIN_IN(gpr3-7, NONE, FAST_SR1);
 	};
 };
 
@@ -1132,14 +1146,14 @@
 	pinctrl-0 = <&initial_imem>;
 
 	initial_imem: initial-state {
-		PIN(INPUT, gpf0-0, UP, FAST_SR1);
-		PIN(INPUT, gpf0-1, UP, FAST_SR1);
-		PIN(INPUT, gpf0-2, DOWN, FAST_SR1);
-		PIN(INPUT, gpf0-3, UP, FAST_SR1);
-		PIN(INPUT, gpf0-4, DOWN, FAST_SR1);
-		PIN(INPUT, gpf0-5, NONE, FAST_SR1);
-		PIN(INPUT, gpf0-6, DOWN, FAST_SR1);
-		PIN(INPUT, gpf0-7, UP, FAST_SR1);
+		PIN_IN(gpf0-0, UP, FAST_SR1);
+		PIN_IN(gpf0-1, UP, FAST_SR1);
+		PIN_IN(gpf0-2, DOWN, FAST_SR1);
+		PIN_IN(gpf0-3, UP, FAST_SR1);
+		PIN_IN(gpf0-4, DOWN, FAST_SR1);
+		PIN_IN(gpf0-5, NONE, FAST_SR1);
+		PIN_IN(gpf0-6, DOWN, FAST_SR1);
+		PIN_IN(gpf0-7, UP, FAST_SR1);
 	};
 };
 
@@ -1148,7 +1162,7 @@
 	pinctrl-0 = <&initial_nfc>;
 
 	initial_nfc: initial-state {
-		PIN(INPUT, gpj0-2, DOWN, FAST_SR1);
+		PIN_IN(gpj0-2, DOWN, FAST_SR1);
 	};
 };
 
@@ -1157,53 +1171,53 @@
 	pinctrl-0 = <&initial_peric>;
 
 	initial_peric: initial-state {
-		PIN(INPUT, gpv7-0, DOWN, FAST_SR1);
-		PIN(INPUT, gpv7-1, DOWN, FAST_SR1);
-		PIN(INPUT, gpv7-2, NONE, FAST_SR1);
-		PIN(INPUT, gpv7-3, DOWN, FAST_SR1);
-		PIN(INPUT, gpv7-4, DOWN, FAST_SR1);
-		PIN(INPUT, gpv7-5, DOWN, FAST_SR1);
+		PIN_IN(gpv7-0, DOWN, FAST_SR1);
+		PIN_IN(gpv7-1, DOWN, FAST_SR1);
+		PIN_IN(gpv7-2, NONE, FAST_SR1);
+		PIN_IN(gpv7-3, DOWN, FAST_SR1);
+		PIN_IN(gpv7-4, DOWN, FAST_SR1);
+		PIN_IN(gpv7-5, DOWN, FAST_SR1);
 
-		PIN(INPUT, gpb0-4, DOWN, FAST_SR1);
+		PIN_IN(gpb0-4, DOWN, FAST_SR1);
 
-		PIN(INPUT, gpc0-2, DOWN, FAST_SR1);
-		PIN(INPUT, gpc0-5, DOWN, FAST_SR1);
-		PIN(INPUT, gpc0-7, DOWN, FAST_SR1);
+		PIN_IN(gpc0-2, DOWN, FAST_SR1);
+		PIN_IN(gpc0-5, DOWN, FAST_SR1);
+		PIN_IN(gpc0-7, DOWN, FAST_SR1);
 
-		PIN(INPUT, gpc1-1, DOWN, FAST_SR1);
+		PIN_IN(gpc1-1, DOWN, FAST_SR1);
 
-		PIN(INPUT, gpc3-4, NONE, FAST_SR1);
-		PIN(INPUT, gpc3-5, NONE, FAST_SR1);
-		PIN(INPUT, gpc3-6, NONE, FAST_SR1);
-		PIN(INPUT, gpc3-7, NONE, FAST_SR1);
+		PIN_IN(gpc3-4, NONE, FAST_SR1);
+		PIN_IN(gpc3-5, NONE, FAST_SR1);
+		PIN_IN(gpc3-6, NONE, FAST_SR1);
+		PIN_IN(gpc3-7, NONE, FAST_SR1);
 
-		PIN(OUTPUT, gpg0-0, NONE, FAST_SR1);
-		PIN(2, gpg0-1, DOWN, FAST_SR1);
+		PIN_OT(gpg0-0, NONE, FAST_SR1);
+		PIN_F2(gpg0-1, DOWN, FAST_SR1);
 
-		PIN(INPUT, gpd2-5, DOWN, FAST_SR1);
+		PIN_IN(gpd2-5, DOWN, FAST_SR1);
 
-		PIN(INPUT, gpd4-0, NONE, FAST_SR1);
-		PIN(INPUT, gpd4-1, DOWN, FAST_SR1);
-		PIN(INPUT, gpd4-2, DOWN, FAST_SR1);
-		PIN(INPUT, gpd4-3, DOWN, FAST_SR1);
-		PIN(INPUT, gpd4-4, DOWN, FAST_SR1);
+		PIN_IN(gpd4-0, NONE, FAST_SR1);
+		PIN_IN(gpd4-1, DOWN, FAST_SR1);
+		PIN_IN(gpd4-2, DOWN, FAST_SR1);
+		PIN_IN(gpd4-3, DOWN, FAST_SR1);
+		PIN_IN(gpd4-4, DOWN, FAST_SR1);
 
-		PIN(INPUT, gpd6-3, DOWN, FAST_SR1);
+		PIN_IN(gpd6-3, DOWN, FAST_SR1);
 
-		PIN(INPUT, gpd8-1, UP, FAST_SR1);
+		PIN_IN(gpd8-1, UP, FAST_SR1);
 
-		PIN(INPUT, gpg1-0, DOWN, FAST_SR1);
-		PIN(INPUT, gpg1-1, DOWN, FAST_SR1);
-		PIN(INPUT, gpg1-2, DOWN, FAST_SR1);
-		PIN(INPUT, gpg1-3, DOWN, FAST_SR1);
-		PIN(INPUT, gpg1-4, DOWN, FAST_SR1);
+		PIN_IN(gpg1-0, DOWN, FAST_SR1);
+		PIN_IN(gpg1-1, DOWN, FAST_SR1);
+		PIN_IN(gpg1-2, DOWN, FAST_SR1);
+		PIN_IN(gpg1-3, DOWN, FAST_SR1);
+		PIN_IN(gpg1-4, DOWN, FAST_SR1);
 
-		PIN(INPUT, gpg2-0, DOWN, FAST_SR1);
-		PIN(INPUT, gpg2-1, DOWN, FAST_SR1);
+		PIN_IN(gpg2-0, DOWN, FAST_SR1);
+		PIN_IN(gpg2-1, DOWN, FAST_SR1);
 
-		PIN(INPUT, gpg3-0, DOWN, FAST_SR1);
-		PIN(INPUT, gpg3-1, DOWN, FAST_SR1);
-		PIN(INPUT, gpg3-5, DOWN, FAST_SR1);
+		PIN_IN(gpg3-0, DOWN, FAST_SR1);
+		PIN_IN(gpg3-1, DOWN, FAST_SR1);
+		PIN_IN(gpg3-5, DOWN, FAST_SR1);
 	};
 };
 
@@ -1212,7 +1226,7 @@
 	pinctrl-0 = <&initial_touch>;
 
 	initial_touch: initial-state {
-		PIN(INPUT, gpj1-2, DOWN, FAST_SR1);
+		PIN_IN(gpj1-2, DOWN, FAST_SR1);
 	};
 };
 
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index bfe4ed8a23d6..661567d2dd7a 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -1858,7 +1858,7 @@
 			status = "disabled";
 		};
 
-		pdma0: pdma@15610000 {
+		pdma0: dma-controller@15610000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x15610000 0x1000>;
 			interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
@@ -1869,7 +1869,7 @@
 			#dma-requests = <32>;
 		};
 
-		pdma1: pdma@15600000 {
+		pdma1: dma-controller@15600000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x15600000 0x1000>;
 			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
@@ -1885,13 +1885,12 @@
 			reg = <0x11400000 0x100>, <0x11500000 0x08>;
 			clocks = <&cmu_aud CLK_PCLK_SFR0_CTRL>;
 			clock-names = "sfr0_ctrl";
-			samsung,pmu-syscon = <&pmu_system_controller>;
 			power-domains = <&pd_aud>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
 
-			adma: adma@11420000 {
+			adma: dma-controller@11420000 {
 				compatible = "arm,pl330", "arm,primecell";
 				reg = <0x11420000 0x1000>;
 				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
index 125c03f351d9..0895e818d3c1 100644
--- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
+++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
@@ -354,7 +354,7 @@
 };
 
 &pinctrl_alive {
-	pmic_irq: pmic-irq {
+	pmic_irq: pmic-irq-pins {
 		samsung,pins = "gpa0-2";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
@@ -393,14 +393,14 @@
 };
 
 &pinctrl_bus1 {
-	usb30_vbus_en: usb30-vbus-en {
+	usb30_vbus_en: usb30-vbus-en-pins {
 		samsung,pins = "gph1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	usb3drd_boost_en: usb3drd-boost-en {
+	usb3drd_boost_en: usb3drd-boost-en-pins {
 		samsung,pins = "gpf4-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
@@ -412,6 +412,11 @@
 	status = "okay";
 };
 
+&usbdrd {
+	vdd10-supply = <&ldo4_reg>;
+	vdd33-supply = <&ldo6_reg>;
+};
+
 &usbdrd_phy {
 	vbus-supply = <&usb30_vbus_reg>;
 	vbus-boost-supply = <&usb3drd_boost_5v>;
diff --git a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
index 472dd649aa7e..be9b971f3697 100644
--- a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
@@ -12,7 +12,7 @@
 #include <dt-bindings/pinctrl/samsung.h>
 
 &pinctrl_alive {
-	gpa0: gpa0 {
+	gpa0: gpa0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -29,7 +29,7 @@
 			     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
-	gpa1: gpa1 {
+	gpa1: gpa1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -46,7 +46,7 @@
 			     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
-	gpa2: gpa2 {
+	gpa2: gpa2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -54,7 +54,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpa3: gpa3 {
+	gpa3: gpa3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -64,7 +64,7 @@
 };
 
 &pinctrl_bus0 {
-	gpb0: gpb0 {
+	gpb0: gpb0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -72,7 +72,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc0: gpc0 {
+	gpc0: gpc0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -80,7 +80,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc1: gpc1 {
+	gpc1: gpc1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -88,7 +88,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc2: gpc2 {
+	gpc2: gpc2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -96,7 +96,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc3: gpc3 {
+	gpc3: gpc3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -104,7 +104,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd0: gpd0 {
+	gpd0: gpd0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -112,7 +112,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd1: gpd1 {
+	gpd1: gpd1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -120,7 +120,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd2: gpd2 {
+	gpd2: gpd2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -128,7 +128,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd4: gpd4 {
+	gpd4: gpd4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -136,7 +136,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd5: gpd5 {
+	gpd5: gpd5-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -144,7 +144,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd6: gpd6 {
+	gpd6: gpd6-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -152,7 +152,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd7: gpd7 {
+	gpd7: gpd7-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -160,7 +160,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd8: gpd8 {
+	gpd8: gpd8-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -168,7 +168,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpg0: gpg0 {
+	gpg0: gpg0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -176,7 +176,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpg3: gpg3 {
+	gpg3: gpg3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -184,161 +184,161 @@
 		#interrupt-cells = <2>;
 	};
 
-	hs_i2c10_bus: hs-i2c10-bus {
+	hs_i2c10_bus: hs-i2c10-bus-pins {
 		samsung,pins = "gpb0-1", "gpb0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	hs_i2c11_bus: hs-i2c11-bus {
+	hs_i2c11_bus: hs-i2c11-bus-pins {
 		samsung,pins = "gpb0-3", "gpb0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	hs_i2c2_bus: hs-i2c2-bus {
+	hs_i2c2_bus: hs-i2c2-bus-pins {
 		samsung,pins = "gpd0-3", "gpd0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart0_data: uart0-data {
+	uart0_data: uart0-data-pins {
 		samsung,pins = "gpd0-0", "gpd0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart0_fctl: uart0-fctl {
+	uart0_fctl: uart0-fctl-pins {
 		samsung,pins = "gpd0-2", "gpd0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart2_data: uart2-data {
+	uart2_data: uart2-data-pins {
 		samsung,pins = "gpd1-4", "gpd1-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	hs_i2c3_bus: hs-i2c3-bus {
+	hs_i2c3_bus: hs-i2c3-bus-pins {
 		samsung,pins = "gpd1-3", "gpd1-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart1_data: uart1-data {
+	uart1_data: uart1-data-pins {
 		samsung,pins = "gpd1-0", "gpd1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart1_fctl: uart1-fctl {
+	uart1_fctl: uart1-fctl-pins {
 		samsung,pins = "gpd1-2", "gpd1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	hs_i2c0_bus: hs-i2c0-bus {
+	hs_i2c0_bus: hs-i2c0-bus-pins {
 		samsung,pins = "gpd2-1", "gpd2-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	hs_i2c1_bus: hs-i2c1-bus {
+	hs_i2c1_bus: hs-i2c1-bus-pins {
 		samsung,pins = "gpd2-3", "gpd2-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	hs_i2c9_bus: hs-i2c9-bus {
+	hs_i2c9_bus: hs-i2c9-bus-pins {
 		samsung,pins = "gpd2-7", "gpd2-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm0_out: pwm0-out {
+	pwm0_out: pwm0-out-pins {
 		samsung,pins = "gpd2-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm1_out: pwm1-out {
+	pwm1_out: pwm1-out-pins {
 		samsung,pins = "gpd2-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm2_out: pwm2-out {
+	pwm2_out: pwm2-out-pins {
 		samsung,pins = "gpd2-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm3_out: pwm3-out {
+	pwm3_out: pwm3-out-pins {
 		samsung,pins = "gpd2-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	hs_i2c8_bus: hs-i2c8-bus {
+	hs_i2c8_bus: hs-i2c8-bus-pins {
 		samsung,pins = "gpd5-3", "gpd5-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart3_data: uart3-data {
+	uart3_data: uart3-data-pins {
 		samsung,pins = "gpd5-0", "gpd5-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	spi2_bus: spi2-bus {
+	spi2_bus: spi2-bus-pins {
 		samsung,pins = "gpd5-0", "gpd5-1", "gpd5-2", "gpd5-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	spi1_bus: spi1-bus {
+	spi1_bus: spi1-bus-pins {
 		samsung,pins = "gpd6-2", "gpd6-3", "gpd6-4", "gpd6-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	spi0_bus: spi0-bus {
+	spi0_bus: spi0-bus-pins {
 		samsung,pins = "gpd8-0", "gpd8-1", "gpd6-0", "gpd6-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	hs_i2c4_bus: hs-i2c4-bus {
+	hs_i2c4_bus: hs-i2c4-bus-pins {
 		samsung,pins = "gpg3-1", "gpg3-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	hs_i2c5_bus: hs-i2c5-bus {
+	hs_i2c5_bus: hs-i2c5-bus-pins {
 		samsung,pins = "gpg3-3", "gpg3-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
@@ -347,7 +347,7 @@
 };
 
 &pinctrl_nfc {
-	gpj0: gpj0 {
+	gpj0: gpj0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -355,7 +355,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	hs_i2c6_bus: hs-i2c6-bus {
+	hs_i2c6_bus: hs-i2c6-bus-pins {
 		samsung,pins = "gpj0-1", "gpj0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
@@ -364,7 +364,7 @@
 };
 
 &pinctrl_touch {
-	gpj1: gpj1 {
+	gpj1: gpj1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -372,7 +372,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	hs_i2c7_bus: hs-i2c7-bus {
+	hs_i2c7_bus: hs-i2c7-bus-pins {
 		samsung,pins = "gpj1-1", "gpj1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
@@ -381,7 +381,7 @@
 };
 
 &pinctrl_ff {
-	gpg4: gpg4 {
+	gpg4: gpg4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -389,7 +389,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	spi3_bus: spi3-bus {
+	spi3_bus: spi3-bus-pins {
 		samsung,pins = "gpg4-0", "gpg4-1", "gpg4-2", "gpg4-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
@@ -398,7 +398,7 @@
 };
 
 &pinctrl_ese {
-	gpv7: gpv7 {
+	gpv7: gpv7-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -406,7 +406,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	spi4_bus: spi4-bus {
+	spi4_bus: spi4-bus-pins {
 		samsung,pins = "gpv7-0", "gpv7-1", "gpv7-2", "gpv7-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
@@ -415,7 +415,7 @@
 };
 
 &pinctrl_fsys0 {
-	gpr4: gpr4 {
+	gpr4: gpr4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -423,35 +423,35 @@
 		#interrupt-cells = <2>;
 	};
 
-	sd2_clk: sd2-clk {
+	sd2_clk: sd2-clk-pins {
 		samsung,pins = "gpr4-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_cmd: sd2-cmd {
+	sd2_cmd: sd2-cmd-pins {
 		samsung,pins = "gpr4-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_cd: sd2-cd {
+	sd2_cd: sd2-cd-pins {
 		samsung,pins = "gpr4-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_bus1: sd2-bus-width1 {
+	sd2_bus1: sd2-bus-width1-pins {
 		samsung,pins = "gpr4-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd2_bus4: sd2-bus-width4 {
+	sd2_bus4: sd2-bus-width4-pins {
 		samsung,pins = "gpr4-4", "gpr4-5", "gpr4-6";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
@@ -460,7 +460,7 @@
 };
 
 &pinctrl_fsys1 {
-	gpr0: gpr0 {
+	gpr0: gpr0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -468,7 +468,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpr1: gpr1 {
+	gpr1: gpr1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -476,7 +476,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpr2: gpr2 {
+	gpr2: gpr2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -484,7 +484,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpr3: gpr3 {
+	gpr3: gpr3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -492,105 +492,105 @@
 		#interrupt-cells = <2>;
 	};
 
-	sd0_clk: sd0-clk {
+	sd0_clk: sd0-clk-pins {
 		samsung,pins = "gpr0-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
 	};
 
-	sd0_cmd: sd0-cmd {
+	sd0_cmd: sd0-cmd-pins {
 		samsung,pins = "gpr0-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
 	};
 
-	sd0_ds: sd0-ds {
+	sd0_ds: sd0-ds-pins {
 		samsung,pins = "gpr0-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
 	};
 
-	sd0_qrdy: sd0-qrdy {
+	sd0_qrdy: sd0-qrdy-pins {
 		samsung,pins = "gpr0-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
 	};
 
-	sd0_bus1: sd0-bus-width1 {
+	sd0_bus1: sd0-bus-width1-pins {
 		samsung,pins = "gpr1-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
 	};
 
-	sd0_bus4: sd0-bus-width4 {
+	sd0_bus4: sd0-bus-width4-pins {
 		samsung,pins = "gpr1-1", "gpr1-2", "gpr1-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
 	};
 
-	sd0_bus8: sd0-bus-width8 {
+	sd0_bus8: sd0-bus-width8-pins {
 		samsung,pins = "gpr1-4", "gpr1-5", "gpr1-6", "gpr1-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
 	};
 
-	sd1_clk: sd1-clk {
+	sd1_clk: sd1-clk-pins {
 		samsung,pins = "gpr2-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>;
 	};
 
-	sd1_cmd: sd1-cmd {
+	sd1_cmd: sd1-cmd-pins {
 		samsung,pins = "gpr2-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>;
 	};
 
-	sd1_ds: sd1-ds {
+	sd1_ds: sd1-ds-pins {
 		samsung,pins = "gpr2-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV4>;
 	};
 
-	sd1_qrdy: sd1-qrdy {
+	sd1_qrdy: sd1-qrdy-pins {
 		samsung,pins = "gpr2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV4>;
 	};
 
-	sd1_int: sd1-int {
+	sd1_int: sd1-int-pins {
 		samsung,pins = "gpr2-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV4>;
 	};
 
-	sd1_bus1: sd1-bus-width1 {
+	sd1_bus1: sd1-bus-width1-pins {
 		samsung,pins = "gpr3-0";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>;
 	};
 
-	sd1_bus4: sd1-bus-width4 {
+	sd1_bus4: sd1-bus-width4-pins {
 		samsung,pins = "gpr3-1", "gpr3-2", "gpr3-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>;
 	};
 
-	sd1_bus8: sd1-bus-width8 {
+	sd1_bus8: sd1-bus-width8-pins {
 		samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
@@ -599,7 +599,7 @@
 };
 
 &pinctrl_bus1 {
-	gpf0: gpf0 {
+	gpf0: gpf0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -607,7 +607,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf1: gpf1 {
+	gpf1: gpf1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -615,7 +615,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf2: gpf2 {
+	gpf2: gpf2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -623,7 +623,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf3: gpf3 {
+	gpf3: gpf3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -631,7 +631,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf4: gpf4 {
+	gpf4: gpf4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -639,7 +639,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf5: gpf5 {
+	gpf5: gpf5-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -647,7 +647,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpg1: gpg1 {
+	gpg1: gpg1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -655,7 +655,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpg2: gpg2 {
+	gpg2: gpg2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -663,7 +663,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gph1: gph1 {
+	gph1: gph1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -671,7 +671,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpv6: gpv6 {
+	gpv6: gpv6-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -679,21 +679,21 @@
 		#interrupt-cells = <2>;
 	};
 
-	spi5_bus: spi5-bus {
+	spi5_bus: spi5-bus-pins {
 		samsung,pins = "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	ufs_refclk_out: ufs-refclk-out {
+	ufs_refclk_out: ufs-refclk-out-pins {
 		samsung,pins = "gpg2-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV2>;
 	};
 
-	ufs_rst_n: ufs-rst-n {
+	ufs_rst_n: ufs-rst-n-pins {
 		samsung,pins = "gph1-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
index c3efbc8add38..e38bb02a2152 100644
--- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -142,7 +142,7 @@
 				<0x11006000 0x2000>;
 		};
 
-		pdma0: pdma@10e10000 {
+		pdma0: dma-controller@10e10000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x10E10000 0x1000>;
 			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
@@ -153,7 +153,7 @@
 			#dma-requests = <32>;
 		};
 
-		pdma1: pdma@10eb0000 {
+		pdma1: dma-controller@10eb0000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x10EB0000 0x1000>;
 			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
@@ -177,10 +177,11 @@
 			clocks = <&fin_pll>, <&clock_topc DOUT_SCLK_BUS0_PLL>,
 				 <&clock_topc DOUT_SCLK_BUS1_PLL>,
 				 <&clock_topc DOUT_SCLK_CC_PLL>,
-				 <&clock_topc DOUT_SCLK_MFC_PLL>;
+				 <&clock_topc DOUT_SCLK_MFC_PLL>,
+				 <&clock_topc DOUT_SCLK_AUD_PLL>;
 			clock-names = "fin_pll", "dout_sclk_bus0_pll",
 				      "dout_sclk_bus1_pll", "dout_sclk_cc_pll",
-				      "dout_sclk_mfc_pll";
+				      "dout_sclk_mfc_pll", "dout_sclk_aud_pll";
 		};
 
 		clock_top1: clock-controller@105e0000 {
@@ -218,12 +219,32 @@
 			compatible = "samsung,exynos7-clock-peric1";
 			reg = <0x14c80000 0xd00>;
 			#clock-cells = <1>;
-			clocks = <&fin_pll>, <&clock_top0 DOUT_ACLK_PERIC1>,
+			clocks = <&fin_pll>,
+				 <&clock_top0 DOUT_ACLK_PERIC1>,
 				 <&clock_top0 CLK_SCLK_UART1>,
 				 <&clock_top0 CLK_SCLK_UART2>,
-				 <&clock_top0 CLK_SCLK_UART3>;
-			clock-names = "fin_pll", "dout_aclk_peric1_66",
-				      "sclk_uart1", "sclk_uart2", "sclk_uart3";
+				 <&clock_top0 CLK_SCLK_UART3>,
+				 <&clock_top0 CLK_SCLK_SPI0>,
+				 <&clock_top0 CLK_SCLK_SPI1>,
+				 <&clock_top0 CLK_SCLK_SPI2>,
+				 <&clock_top0 CLK_SCLK_SPI3>,
+				 <&clock_top0 CLK_SCLK_SPI4>,
+				 <&clock_top0 CLK_SCLK_I2S1>,
+				 <&clock_top0 CLK_SCLK_PCM1>,
+				 <&clock_top0 CLK_SCLK_SPDIF>;
+			clock-names = "fin_pll",
+				      "dout_aclk_peric1_66",
+				      "sclk_uart1",
+				      "sclk_uart2",
+				      "sclk_uart3",
+				      "sclk_spi0",
+				      "sclk_spi1",
+				      "sclk_spi2",
+				      "sclk_spi3",
+				      "sclk_spi4",
+				      "sclk_i2s1",
+				      "sclk_pcm1",
+				      "sclk_spdif";
 		};
 
 		clock_peris: clock-controller@10040000 {
@@ -663,16 +684,15 @@
 			reg = <0x15500000 0x100>;
 			clocks = <&clock_fsys0 ACLK_USBDRD300>,
 			       <&clock_fsys0 OSCCLK_PHY_CLKOUT_USB30_PHY>,
-			       <&clock_fsys0 PHYCLK_USBDRD300_UDRD30_PIPE_PCLK_USER>,
 			       <&clock_fsys0 PHYCLK_USBDRD300_UDRD30_PHYCLK_USER>,
+			       <&clock_fsys0 PHYCLK_USBDRD300_UDRD30_PIPE_PCLK_USER>,
 			       <&clock_fsys0 SCLK_USBDRD300_REFCLK>;
-			clock-names = "phy", "ref", "phy_pipe",
-				"phy_utmi", "itp";
+			clock-names = "phy", "ref", "phy_utmi", "phy_pipe", "itp";
 			samsung,pmu-syscon = <&pmu_system_controller>;
 			#phy-cells = <1>;
 		};
 
-		usbdrd3 {
+		usbdrd: usb {
 			compatible = "samsung,exynos7-dwusb3";
 			clocks = <&clock_fsys0 ACLK_USBDRD300>,
 			       <&clock_fsys0 SCLK_USBDRD300_SUSPENDCLK>,
diff --git a/arch/arm64/boot/dts/exynos/exynos7885-jackpotlte.dts b/arch/arm64/boot/dts/exynos/exynos7885-jackpotlte.dts
new file mode 100644
index 000000000000..4cf9aa25f618
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos7885-jackpotlte.dts
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung Galaxy A8 2018 (jackpotlte/SM-A530F) device tree source
+ *
+ * Copyright (c) 2021 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2021 Dávid Virág
+ */
+
+/dts-v1/;
+#include "exynos7885.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Samsung Galaxy A8 (2018)";
+	compatible = "samsung,jackpotlte", "samsung,exynos7885";
+	chassis-type = "handset";
+
+	aliases {
+		serial0 = &serial_0;
+		serial1 = &serial_1;
+		serial2 = &serial_2;
+	};
+
+	chosen {
+		stdout-path = &serial_2;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x3da00000>,
+		      <0x0 0xc0000000 0x40000000>,
+		      <0x8 0x80000000 0x40000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_volup &key_voldown &key_power>;
+
+		volup-key {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&gpa1 5 GPIO_ACTIVE_LOW>;
+		};
+
+		voldown-key {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&gpa1 6 GPIO_ACTIVE_LOW>;
+		};
+
+		power-key {
+			label = "Power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpa1 7 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+};
+
+&oscclk {
+	clock-frequency = <26000000>;
+};
+
+&pinctrl_alive {
+	key_volup: key-volup-pins {
+		samsung,pins = "gpa1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	key_voldown: key-voldown-pins {
+		samsung,pins = "gpa1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	key_power: key-power-pins {
+		samsung,pins = "gpa1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
+
+&serial_2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos7885-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos7885-pinctrl.dtsi
new file mode 100644
index 000000000000..a50c1dbd5545
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos7885-pinctrl.dtsi
@@ -0,0 +1,855 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung Exynos7885 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2017 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2021 Dávid Virág
+ *
+ * Samsung's Exynos7885 SoC pin-mux and pin-config options are listed as
+ * device tree nodes in this file.
+ */
+
+#include <dt-bindings/pinctrl/samsung.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+&pinctrl_alive {
+	etc0: etc0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	etc1: etc1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa0: gpa0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpa1: gpa1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpa2: gpa2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpq0: gpq0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sim1_det_gpio: sim1-det-gpio-pins {
+		samsung,pins = "gpa2-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	sim0_det_gpio: sim0-det-gpio-pins {
+		samsung,pins = "gpa2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	speedy_bus: speedy-bus-pins {
+		samsung,pins = "gpq0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* UART_DEBUG */
+	uart2_bus: uart2-bus-pins {
+		samsung,pins = "gpq0-4", "gpq0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
+
+&pinctrl_dispaud {
+	gpb0: gpb0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb1: gpb1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb2: gpb2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	aud_codec_mclk: aud-codec-mclk-pins {
+		samsung,pins = "gpb0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_codec_mclk_idle: aud-codec-mclk-idle-pins {
+		samsung,pins = "gpb0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_codec_bus: aud-codec-bus-pins {
+		samsung,pins = "gpb0-1", "gpb0-2", "gpb0-3", "gpb0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_codec_bus_idle: aud-codec-bus-idle-pins {
+		samsung,pins = "gpb0-1", "gpb0-2", "gpb0-3", "gpb0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_loopback_bus: aud-loopback-bus-pins {
+		samsung,pins = "gpb1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_loopback_bus_idle: aud-loopback-bus-idle-pins {
+		samsung,pins = "gpb1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_fm_bus: aud-fm-bus-pins {
+		samsung,pins = "gpb1-1", "gpb1-2", "gpb1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_fm_bus_idle: aud-fm-bus-idle-pins {
+		samsung,pins = "gpb1-1", "gpb1-2", "gpb1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_spk_bus: aud-spk-bus-pins {
+		samsung,pins = "gpb2-0", "gpb2-1", "gpb2-2", "gpb2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_spk_bus_idle: aud-spk-bus-idle-pins {
+		samsung,pins = "gpb2-0", "gpb2-1", "gpb2-2", "gpb2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+};
+
+&pinctrl_fsys {
+	gpf0: gpf0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf2: gpf2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf3: gpf3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf4: gpf4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sd0_clk: sd0-clk-pins {
+		samsung,pins = "gpf0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_clk_fast_slew_rate_1x: sd0-clk-fast-slew-rate-1x-pins {
+		samsung,pins = "gpf0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	sd0_clk_fast_slew_rate_2x: sd0-clk-fast-slew-rate-2x-pins {
+		samsung,pins = "gpf0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV2>;
+	};
+
+	sd0_clk_fast_slew_rate_3x: sd0-clk-fast-slew-rate-3x-pins {
+		samsung,pins = "gpf0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sd0_clk_fast_slew_rate_4x: sd0-clk-fast-slew-rate-4x-pins {
+		samsung,pins = "gpf0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_cmd: sd0-cmd-pins {
+		samsung,pins = "gpf0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_rdqs: sd0-rdqs-pins {
+		samsung,pins = "gpf0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_bus1: sd0-bus-width1-pins {
+		samsung,pins = "gpf2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_bus4: sd0-bus-width4-pins {
+		samsung,pins = "gpf2-1", "gpf2-2", "gpf2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_bus8: sd0-bus-width8-pins {
+		samsung,pins = "gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd1_clk: sd1-clk-pins {
+		samsung,pins = "gpf3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sd1_clk_fast_slew_rate_1x: sd1-clk-fast-slew-rate-1x-pins {
+		samsung,pins = "gpf3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	sd1_clk_fast_slew_rate_2x: sd1-clk-fast-slew-rate-2x-pins {
+		samsung,pins = "gpf3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV2>;
+	};
+
+	sd1_clk_fast_slew_rate_3x: sd1-clk-fast-slew-rate-3x-pins {
+		samsung,pins = "gpf3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sd1_clk_fast_slew_rate_4x: sd1-clk-fast-slew-rate-4x-pins {
+		samsung,pins = "gpf3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd1_cmd: sd1-cmd-pins {
+		samsung,pins = "gpf3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sd1_bus1: sd1-bus-width1-pins {
+		samsung,pins = "gpf3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sd1_bus4: sd1-bus-width4-pins {
+		samsung,pins = "gpf3-3", "gpf3-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sd2_clk: sd2-clk-pins {
+		samsung,pins = "gpf4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sd2_clk_fast_slew_rate_1x: sd2-clk-fast-slew-rate-1x-pins {
+		samsung,pins = "gpf4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	sd2_clk_fast_slew_rate_2x: sd2-clk-fast-slew-rate-2x-pins {
+		samsung,pins = "gpf4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV2>;
+	};
+
+	sd2_clk_fast_slew_rate_3x: sd2-clk-fast-slew-rate-3x-pins {
+		samsung,pins = "gpf4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sd2_clk_fast_slew_rate_4x: sd2-clk-fast-slew-rate-4x-pins {
+		samsung,pins = "gpf4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd2_cmd: sd2-cmd-pins {
+		samsung,pins = "gpf4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sd2_bus1: sd2-bus-width1-pins {
+		samsung,pins = "gpf4-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sd2_bus4: sd2-bus-width4-pins {
+		samsung,pins = "gpf4-3", "gpf4-4", "gpf4-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+};
+
+&pinctrl_top {
+	gpc0: gpc0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc2: gpc2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg0: gpg0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg1: gpg1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg2: gpg2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg3: gpg3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg4: gpg4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp0: gpp0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp1: gpp1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp2: gpp2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp3: gpp3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp4: gpp4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp5: gpp5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp6: gpp6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp7: gpp7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp8: gpp8-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	hs_i2c0_bus: hs-i2c0-bus-pins {
+		samsung,pins = "gpc1-1", "gpc1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hs_i2c1_bus: hs-i2c1-bus-pins {
+		samsung,pins = "gpc1-3", "gpc1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	hs_i2c2_bus: hs-i2c2-bus-pins {
+		samsung,pins = "gpc1-5", "gpc1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	hs_i2c3_bus: hs-i2c3-bus-pins {
+		samsung,pins = "gpc1-7", "gpc1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	/* USI0 UART */
+	uart3_bus_single: uart3-bus-single-pins {
+		samsung,pins = "gpc2-3", "gpc2-2", "gpc2-1", "gpc2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI0 UART_HSI2C1 */
+	uart3_bus_dual: uart3-bus-dual-pins {
+		samsung,pins = "gpc2-1", "gpc2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI0 HSI2C0 */
+	hs_i2c4_bus: hs-i2c4-bus-pins {
+		samsung,pins = "gpc2-1", "gpc2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	/* USI0 HSI2C1 */
+	hs_i2c5_bus: hs-i2c5-bus-pins {
+		samsung,pins = "gpc2-3", "gpc2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	/* USI0 SPI */
+	spi2_bus: spi2-bus-pins {
+		samsung,pins = "gpc2-1", "gpc2-0", "gpc2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi2_cs: spi2-cs-pins {
+		samsung,pins = "gpc2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* USI1 UART */
+	uart4_bus_single: uart4-bus-single-pins {
+		samsung,pins = "gpc2-7", "gpc2-6", "gpc2-5", "gpc2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI1 UART_HSI2C1*/
+	uart4_bus_dual: uart4-bus-dual-pins {
+		samsung,pins = "gpc2-5", "gpc2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI1 HSI2C0 */
+	hs_i2c6_bus: hs-i2c6-bus-pins {
+		samsung,pins = "gpc2-5", "gpc2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	/* USI1 HSI2C1 */
+	hs_i2c7_bus: hs-i2c7-bus-pins {
+		samsung,pins = "gpc2-7", "gpc2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	/* USI1 SPI */
+	spi3_bus: spi3-bus-pins {
+		samsung,pins = "gpc2-5", "gpc2-4", "gpc2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi3_cs: spi3-cs-pins {
+		samsung,pins = "gpc2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	fm_lna_en: fm-lna-en-pins {
+		samsung,pins = "gpg0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-val = <1>;
+	};
+
+	uart1_bus: uart1-bus-pins {
+		samsung,pins = "gpg1-3", "gpg1-2", "gpg1-1", "gpg1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i2c7_bus: i2c7-bus-pins {
+		samsung,pins = "gpg1-5", "gpg1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	aud_dmic_on: aud-dmic-on-pins {
+		samsung,pins = "gpg2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-val = <1>;
+	};
+
+	aud_dmic_off: aud-dmic-off-pins {
+		samsung,pins = "gpg2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-val = <0>;
+	};
+
+	/* UART_HEALTH */
+	uart0_bus: uart0-bus-pins {
+		samsung,pins = "gpp0-3", "gpp0-2", "gpp0-1", "gpp0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i2c0_bus: i2c0-bus-pins {
+		samsung,pins = "gpp1-1", "gpp1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c1_bus: i2c1-bus-pins {
+		samsung,pins = "gpp1-3", "gpp1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c2_bus: i2c2-bus-pins {
+		samsung,pins = "gpp2-1", "gpp2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c3_bus: i2c3-bus-pins {
+		samsung,pins = "gpp3-1", "gpp3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c4_bus: i2c4-bus-pins {
+		samsung,pins = "gpp4-1", "gpp4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c5_bus: i2c5-bus-pins {
+		samsung,pins = "gpp4-3", "gpp4-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c6_bus: i2c6-bus-pins {
+		samsung,pins = "gpp4-5", "gpp4-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* SPI_ESE */
+	spi0_bus: spi0-bus-pins {
+		samsung,pins = "gpp5-3", "gpp5-2", "gpp5-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi0_cs: spi0-cs-pins {
+		samsung,pins = "gpp5-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* SPI_FP */
+	spi1_bus: spi1-bus-pins {
+		samsung,pins = "gpp6-3", "gpp6-2", "gpp6-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi1_cs: spi1-cs-pins {
+		samsung,pins = "gpp6-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* USI2 UART */
+	uart5_bus_single: uart5-bus-single-pins {
+		samsung,pins = "gpp8-1", "gpp8-0", "gpp7-1", "gpp7-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	  };
+
+	/* USI2 UART_HSI2C1 */
+	uart5_bus_dual: uart5-bus-dual-pins {
+		samsung,pins = "gpp7-1", "gpp7-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI2 HSI2C0 */
+	hs_i2c8_bus: hs-i2c8-bus-pins {
+		samsung,pins = "gpp7-1", "gpp7-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	/* USI2 HSI2C1 */
+	hs_i2c9_bus: hs-i2c9-bus-pins {
+		samsung,pins = "gpp8-1", "gpp8-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_UP>;
+	};
+
+	/* USI2 SPI */
+	spi4_bus: spi4-bus-pins {
+		samsung,pins = "gpp7-1", "gpp7-0", "gpp8-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi4_cs: spi4-cs-pins {
+		samsung,pins = "gpp8-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos7885.dtsi b/arch/arm64/boot/dts/exynos/exynos7885.dtsi
new file mode 100644
index 000000000000..3170661f5b67
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos7885.dtsi
@@ -0,0 +1,423 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung Exynos7885 SoC device tree source
+ *
+ * Copyright (c) 2021 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2021 Dávid Virág
+ */
+
+#include <dt-bindings/clock/exynos7885.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "samsung,exynos7885";
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		pinctrl0 = &pinctrl_alive;
+		pinctrl1 = &pinctrl_dispaud;
+		pinctrl2 = &pinctrl_fsys;
+		pinctrl3 = &pinctrl_top;
+	};
+
+	arm-a53-pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>,
+				     <&cpu1>,
+				     <&cpu2>,
+				     <&cpu3>,
+				     <&cpu4>,
+				     <&cpu5>;
+	};
+
+	arm-a73-pmu {
+		compatible = "arm,cortex-a73-pmu";
+		interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu6>,
+				     <&cpu7>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+				core4 {
+					cpu = <&cpu4>;
+				};
+				core5 {
+					cpu = <&cpu5>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu6>;
+				};
+				core1 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x100>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x101>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x102>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x103>;
+			enable-method = "psci";
+		};
+
+		cpu4: cpu@200 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x200>;
+			enable-method = "psci";
+		};
+
+		cpu5: cpu@201 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x201>;
+			enable-method = "psci";
+		};
+
+		cpu6: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x0>;
+			enable-method = "psci";
+		};
+
+		cpu7: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a73";
+			reg = <0x1>;
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci";
+		method = "smc";
+		cpu_suspend = <0xc4000001>;
+		cpu_off = <0x84000002>;
+		cpu_on = <0xc4000003>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		/* Hypervisor Virtual Timer interrupt is not wired to GIC */
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	fixed-rate-clocks {
+		oscclk: osc-clock {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-output-names = "oscclk";
+		};
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x20000000>;
+
+		chipid@10000000 {
+			compatible = "samsung,exynos850-chipid";
+			reg = <0x10000000 0x24>;
+		};
+
+		gic: interrupt-controller@12301000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x12301000 0x1000>,
+			      <0x12302000 0x2000>,
+			      <0x12304000 0x2000>,
+			      <0x12306000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) |
+						 IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		cmu_peri: clock-controller@10010000 {
+			compatible = "samsung,exynos7885-cmu-peri";
+			reg = <0x10010000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>,
+				 <&cmu_top CLK_DOUT_PERI_BUS>,
+				 <&cmu_top CLK_DOUT_PERI_SPI0>,
+				 <&cmu_top CLK_DOUT_PERI_SPI1>,
+				 <&cmu_top CLK_DOUT_PERI_UART0>,
+				 <&cmu_top CLK_DOUT_PERI_UART1>,
+				 <&cmu_top CLK_DOUT_PERI_UART2>,
+				 <&cmu_top CLK_DOUT_PERI_USI0>,
+				 <&cmu_top CLK_DOUT_PERI_USI1>,
+				 <&cmu_top CLK_DOUT_PERI_USI2>;
+			clock-names = "oscclk",
+				      "dout_peri_bus",
+				      "dout_peri_spi0",
+				      "dout_peri_spi1",
+				      "dout_peri_uart0",
+				      "dout_peri_uart1",
+				      "dout_peri_uart2",
+				      "dout_peri_usi0",
+				      "dout_peri_usi1",
+				      "dout_peri_usi2";
+		};
+
+		cmu_core: clock-controller@12000000 {
+			compatible = "samsung,exynos7885-cmu-core";
+			reg = <0x12000000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>,
+				 <&cmu_top CLK_DOUT_CORE_BUS>,
+				 <&cmu_top CLK_DOUT_CORE_CCI>,
+				 <&cmu_top CLK_DOUT_CORE_G3D>;
+			clock-names = "oscclk",
+				      "dout_core_bus",
+				      "dout_core_cci",
+				      "dout_core_g3d";
+		};
+
+		cmu_top: clock-controller@12060000 {
+			compatible = "samsung,exynos7885-cmu-top";
+			reg = <0x12060000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>;
+			clock-names = "oscclk";
+		};
+
+		pinctrl_alive: pinctrl@11cb0000 {
+			compatible = "samsung,exynos7885-pinctrl";
+			reg = <0x11cb0000 0x1000>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos7-wakeup-eint";
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		pinctrl_fsys: pinctrl@13430000 {
+			compatible = "samsung,exynos7885-pinctrl";
+			reg = <0x13430000 0x1000>;
+			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_top: pinctrl@139b0000 {
+			compatible = "samsung,exynos7885-pinctrl";
+			reg = <0x139b0000 0x1000>;
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_dispaud: pinctrl@148f0000 {
+			compatible = "samsung,exynos7885-pinctrl";
+			reg = <0x148f0000 0x1000>;
+			interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pmu_system_controller: system-controller@11c80000 {
+			compatible = "samsung,exynos7-pmu", "syscon";
+			reg = <0x11c80000 0x10000>;
+		};
+
+		serial_0: serial@13800000 {
+			compatible = "samsung,exynos5433-uart";
+			reg = <0x13800000 0x100>;
+			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_bus>;
+			clocks = <&cmu_peri CLK_GOUT_UART0_EXT_UCLK>,
+				 <&cmu_peri CLK_GOUT_UART0_PCLK>;
+			clock-names = "uart", "clk_uart_baud0";
+			samsung,uart-fifosize = <64>;
+			status = "disabled";
+		};
+
+		serial_1: serial@13810000 {
+			compatible = "samsung,exynos5433-uart";
+			reg = <0x13810000 0x100>;
+			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart1_bus>;
+			clocks = <&cmu_peri CLK_GOUT_UART1_EXT_UCLK>,
+				 <&cmu_peri CLK_GOUT_UART1_PCLK>;
+			clock-names = "uart", "clk_uart_baud0";
+			samsung,uart-fifosize = <256>;
+			status = "disabled";
+		};
+
+		serial_2: serial@13820000 {
+			compatible = "samsung,exynos5433-uart";
+			reg = <0x13820000 0x100>;
+			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart2_bus>;
+			clocks = <&cmu_peri CLK_GOUT_UART2_EXT_UCLK>,
+				 <&cmu_peri CLK_GOUT_UART2_PCLK>;
+			clock-names = "uart", "clk_uart_baud0";
+			samsung,uart-fifosize = <256>;
+			status = "disabled";
+		};
+
+		i2c_0: i2c@13830000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13830000 0x100>;
+			interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_bus>;
+			clocks = <&cmu_peri CLK_GOUT_I2C0_PCLK>;
+			clock-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c_1: i2c@13840000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13840000 0x100>;
+			interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_bus>;
+			clocks = <&cmu_peri CLK_GOUT_I2C1_PCLK>;
+			clock-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c_2: i2c@13850000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13850000 0x100>;
+			interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_bus>;
+			clocks = <&cmu_peri CLK_GOUT_I2C2_PCLK>;
+			clock-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c_3: i2c@13860000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13860000 0x100>;
+			interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c3_bus>;
+			clocks = <&cmu_peri CLK_GOUT_I2C3_PCLK>;
+			clock-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c_4: i2c@13870000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13870000 0x100>;
+			interrupts = <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c4_bus>;
+			clocks = <&cmu_peri CLK_GOUT_I2C4_PCLK>;
+			clock-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c_5: i2c@13880000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13880000 0x100>;
+			interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c5_bus>;
+			clocks = <&cmu_peri CLK_GOUT_I2C5_PCLK>;
+			clock-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c_6: i2c@13890000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13890000 0x100>;
+			interrupts = <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c6_bus>;
+			clocks = <&cmu_peri CLK_GOUT_I2C6_PCLK>;
+			clock-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c_7: i2c@11cd0000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x11cd0000 0x100>;
+			interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c7_bus>;
+			clocks = <&cmu_peri CLK_GOUT_I2C7_PCLK>;
+			clock-names = "i2c";
+			status = "disabled";
+		};
+	};
+};
+
+#include "exynos7885-pinctrl.dtsi"
+#include "arm/exynos-syscon-restart.dtsi"
diff --git a/arch/arm64/boot/dts/exynos/exynos850-e850-96.dts b/arch/arm64/boot/dts/exynos/exynos850-e850-96.dts
new file mode 100644
index 000000000000..7b5a61d22cc5
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos850-e850-96.dts
@@ -0,0 +1,195 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * WinLink E850-96 board device tree source
+ *
+ * Copyright (C) 2018 Samsung Electronics Co., Ltd.
+ * Copyright (C) 2021 Linaro Ltd.
+ *
+ * Device tree source file for WinLink's E850-96 board which is based on
+ * Samsung Exynos850 SoC.
+ */
+
+/dts-v1/;
+
+#include "exynos850.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "WinLink E850-96 board";
+	compatible = "winlink,e850-96", "samsung,exynos850";
+
+	chosen {
+		stdout-path = &serial_0;
+	};
+
+	/*
+	 * RAM: 4 GiB (eMCP):
+	 *   - 2 GiB at 0x80000000
+	 *   - 2 GiB at 0x880000000
+	 *
+	 * 0xbab00000..0xbfffffff: secure memory (85 MiB).
+	 */
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x3ab00000>,
+		      <0x0 0xc0000000 0x40000000>,
+		      <0x8 0x80000000 0x80000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_voldown_pins &key_volup_pins>;
+
+		volume-down-key {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&gpa1 0 GPIO_ACTIVE_LOW>;
+		};
+
+		volume-up-key {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&gpa0 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* HEART_BEAT_LED */
+		user_led1: led-1 {
+			label = "yellow:user1";
+			gpios = <&gpg2 2 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_YELLOW>;
+			function = LED_FUNCTION_HEARTBEAT;
+			linux,default-trigger = "heartbeat";
+		};
+
+		/* eMMC_LED */
+		user_led2: led-2 {
+			label = "yellow:user2";
+			gpios = <&gpg2 3 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_YELLOW>;
+			linux,default-trigger = "mmc0";
+		};
+
+		/* SD_LED */
+		user_led3: led-3 {
+			label = "white:user3";
+			gpios = <&gpg2 4 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_SD;
+			linux,default-trigger = "mmc2";
+		};
+
+		/* WIFI_LED */
+		wlan_active_led: led-4 {
+			label = "yellow:wlan";
+			gpios = <&gpg2 6 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_YELLOW>;
+			function = LED_FUNCTION_WLAN;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+
+		/* BLUETOOTH_LED */
+		bt_active_led: led-5 {
+			label = "blue:bt";
+			gpios = <&gpg2 7 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_BLUETOOTH;
+			linux,default-trigger = "hci0rx";
+			default-state = "off";
+		};
+	};
+
+	/*
+	 * RTC clock (XrtcXTI); external, must be 32.768 kHz.
+	 *
+	 * TODO: Remove this once RTC clock is implemented properly as part of
+	 *       PMIC driver.
+	 */
+	rtcclk: clock-rtcclk {
+		compatible = "fixed-clock";
+		clock-output-names = "rtcclk";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+};
+
+&cmu_hsi {
+	clocks = <&oscclk>, <&rtcclk>,
+		 <&cmu_top CLK_DOUT_HSI_BUS>,
+		 <&cmu_top CLK_DOUT_HSI_MMC_CARD>,
+		 <&cmu_top CLK_DOUT_HSI_USB20DRD>;
+	clock-names = "oscclk", "rtcclk", "dout_hsi_bus",
+		      "dout_hsi_mmc_card", "dout_hsi_usb20drd";
+};
+
+&mmc_0 {
+	status = "okay";
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	cap-mmc-highspeed;
+	non-removable;
+	mmc-hs400-enhanced-strobe;
+	card-detect-delay = <200>;
+	clock-frequency = <800000000>;
+	bus-width = <8>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <2 4>;
+	samsung,dw-mshc-hs400-timing = <0 2>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk_pins &sd0_cmd_pins &sd0_rdqs_pins &sd0_nreset_pins
+		     &sd0_bus1_pins &sd0_bus4_pins &sd0_bus8_pins>;
+};
+
+&oscclk {
+	clock-frequency = <26000000>;
+};
+
+&pinctrl_alive {
+	key_voldown_pins: key-voldown-pins {
+		samsung,pins = "gpa1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	key_volup_pins: key-volup-pins {
+		samsung,pins = "gpa0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_EINT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&cmu_apm CLK_GOUT_RTC_PCLK>, <&rtcclk>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&serial_0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+};
+
+&usi_uart {
+	samsung,clkreq-on; /* needed for UART mode */
+	status = "okay";
+};
+
+&watchdog_cl0 {
+	status = "okay";
+};
+
+&watchdog_cl1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi
new file mode 100644
index 000000000000..f43e4a206282
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi
@@ -0,0 +1,663 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos850 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (C) 2017 Samsung Electronics Co., Ltd.
+ * Copyright (C) 2021 Linaro Ltd.
+ *
+ * Samsung's Exynos850 SoC pin-mux and pin-config options are listed as device
+ * tree nodes in this file.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/samsung.h>
+
+&pinctrl_alive {
+	gpa0: gpa0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpa1: gpa1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpa2: gpa2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpa3: gpa3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpa4: gpa4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpq0: gpq0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	/* I2C5 (also called CAM_PMIC_I2C in TRM) */
+	i2c5_pins: i2c5-pins {
+		samsung,pins = "gpa3-5", "gpa3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* I2C6 (also called MOTOR_I2C in TRM) */
+	i2c6_pins: i2c6-pins {
+		samsung,pins = "gpa3-7", "gpa4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* USI: UART_DEBUG_0 pins */
+	uart0_pins: uart0-pins {
+		samsung,pins = "gpq0-0", "gpq0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI: UART_DEBUG_1 pins */
+	uart1_pins: uart1-pins {
+		samsung,pins = "gpa3-7", "gpa4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
+
+&pinctrl_cmgp {
+	gpm0: gpm0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm1: gpm1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm2: gpm2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm3: gpm3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm4: gpm4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm5: gpm5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm6: gpm6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm7: gpm7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	/* USI_CMGP0: HSI2C function */
+	hsi2c3_pins: hsi2c3-pins {
+		samsung,pins = "gpm0-0", "gpm1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* USI_CMGP0: UART function (4 pins, Auto Flow Control) */
+	uart1_single_pins: uart1-single-pins {
+		samsung,pins = "gpm0-0", "gpm1-0", "gpm2-0", "gpm3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI_CMGP0: UART function (2 pins, Non-Auto Flow Control) */
+	uart1_dual_pins: uart1-dual-pins {
+		samsung,pins = "gpm0-0", "gpm1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI_CMGP0: SPI function */
+	spi1_pins: spi1-pins {
+		samsung,pins = "gpm0-0", "gpm1-0", "gpm2-0", "gpm3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* USI_CMGP1: HSI2C function */
+	hsi2c4_pins: hsi2c4-pins {
+		samsung,pins = "gpm4-0", "gpm5-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* USI_CMGP1: UART function (4 pins, Auto Flow Control) */
+	uart2_single_pins: uart2-single-pins {
+		samsung,pins = "gpm4-0", "gpm5-0", "gpm6-0", "gpm7-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI_CMGP1: UART function (2 pins, Non-Auto Flow Control) */
+	uart2_dual_pins: uart2-dual-pins {
+		samsung,pins = "gpm4-0", "gpm5-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	/* USI_CMGP1: SPI function */
+	spi2_pins: spi2-pins {
+		samsung,pins = "gpm4-0", "gpm5-0", "gpm6-0", "gpm7-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_aud {
+	gpb0: gpb0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb1: gpb1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	aud_codec_mclk_pins: aud-codec-mclk-pins {
+		samsung,pins = "gpb0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_codec_mclk_idle_pins: aud-codec-mclk-idle-pins {
+		samsung,pins = "gpb0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s0_pins: aud-i2s0-pins {
+		samsung,pins = "gpb0-1", "gpb0-2", "gpb0-3", "gpb0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s0_idle_pins: aud-i2s0-idle-pins {
+		samsung,pins = "gpb0-1", "gpb0-2", "gpb0-3", "gpb0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s1_pins: aud-i2s1-pins {
+		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_i2s1_idle_pins: aud-i2s1-idle-pins {
+		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_fm_pins: aud-fm-pins {
+		samsung,pins = "gpb1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	aud_fm_idle_pins: aud-fm-idle-pins {
+		samsung,pins = "gpb1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+};
+
+&pinctrl_hsi {
+	gpf2: gpf2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sd2_clk_pins: sd2-clk-pins {
+		samsung,pins = "gpf2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV2>;
+	};
+
+	sd2_cmd_pins: sd2-cmd-pins {
+		samsung,pins = "gpf2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV2>;
+	 };
+
+	sd2_bus1_pins: sd2-bus1-pins {
+		samsung,pins = "gpf2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV2>;
+	};
+
+	sd2_bus4_pins: sd2-bus4-pins {
+		samsung,pins = "gpf2-3", "gpf2-4", "gpf2-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS850_HSI_PIN_DRV_LV2>;
+	};
+
+	sd2_pdn_pins: sd2-pdn-pins {
+		samsung,pins = "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
+			       "gpf2-4", "gpf2-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+};
+
+&pinctrl_core {
+	gpf0: gpf0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sd0_clk_pins: sd0-clk-pins {
+		samsung,pins = "gpf0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_cmd_pins: sd0-cmd-pins {
+		samsung,pins = "gpf0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_rdqs_pins: sd0-rdqs-pins {
+		samsung,pins = "gpf0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_nreset_pins: sd0-nreset-pins {
+		samsung,pins = "gpf0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_bus1_pins: sd0-bus1-pins {
+		samsung,pins = "gpf1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_bus4_pins: sd0-bus4-pins {
+		samsung,pins = "gpf1-1", "gpf1-2", "gpf1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_bus8_pins: sd0-bus8-pins {
+		samsung,pins = "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+};
+
+&pinctrl_peri {
+	gpc0: gpc0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg0: gpg0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg1: gpg1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg2: gpg2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg3: gpg3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp0: gpp0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+	gpp1: gpp1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp2: gpp2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sensor_mclk0_in_pins: sensor-mclk0-in-pins {
+		samsung,pins = "gpc0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sensor_mclk0_out_pins: sensor-mclk0-out-pins {
+		samsung,pins = "gpc0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sensor_mclk0_fn_pins: sensor-mclk0-fn-pins {
+		samsung,pins = "gpc0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sensor_mclk1_in_pins: sensor-mclk1-in-pins {
+		samsung,pins = "gpc0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sensor_mclk1_out_pins: sensor-mclk1-out-pins {
+		samsung,pins = "gpc0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sensor_mclk1_fn_pins: sensor-mclk1-fn-pins {
+		samsung,pins = "gpc0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sensor_mclk2_in_pins: sensor-mclk2-in-pins {
+		samsung,pins = "gpc0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sensor_mclk2_out_pins: sensor-mclk2-out-pins {
+		samsung,pins = "gpc0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	sensor_mclk2_fn_pins: sensor-mclk2-fn-pins {
+		samsung,pins = "gpc0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+	};
+
+	/* USI: HSI2C0 */
+	hsi2c0_pins: hsi2c0-pins {
+		samsung,pins = "gpc1-0", "gpc1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* USI: HSI2C1 */
+	hsi2c1_pins: hsi2c1-pins {
+		samsung,pins = "gpc1-2", "gpc1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* USI: HSI2C2 */
+	hsi2c2_pins: hsi2c2-pins {
+		samsung,pins = "gpc1-4", "gpc1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	/* USI: SPI */
+	spi0_pins: spi0-pins {
+		samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2", "gpp2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c0_pins: i2c0-pins {
+		samsung,pins = "gpp0-0", "gpp0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c1_pins: i2c1-pins {
+		samsung,pins = "gpp0-2", "gpp0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c2_pins: i2c2-pins {
+		samsung,pins = "gpp0-4", "gpp0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c3_pins: i2c3-pins {
+		samsung,pins = "gpp1-0", "gpp1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c4_pins: i2c4-pins {
+		samsung,pins = "gpp1-2", "gpp1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	xclkout_pins: xclkout-pins {
+		samsung,pins = "gpq0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos850.dtsi b/arch/arm64/boot/dts/exynos/exynos850.dtsi
new file mode 100644
index 000000000000..d1700e96fee2
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos850.dtsi
@@ -0,0 +1,701 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung Exynos850 SoC device tree source
+ *
+ * Copyright (C) 2018 Samsung Electronics Co., Ltd.
+ * Copyright (C) 2021 Linaro Ltd.
+ *
+ * Samsung Exynos850 SoC device nodes are listed in this file.
+ * Exynos850 based board files can include this file and provide
+ * values for board specific bindings.
+ */
+
+#include <dt-bindings/clock/exynos850.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/samsung,exynos-usi.h>
+
+/ {
+	/* Also known under engineering name Exynos3830 */
+	compatible = "samsung,exynos850";
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		pinctrl0 = &pinctrl_alive;
+		pinctrl1 = &pinctrl_cmgp;
+		pinctrl2 = &pinctrl_aud;
+		pinctrl3 = &pinctrl_hsi;
+		pinctrl4 = &pinctrl_core;
+		pinctrl5 = &pinctrl_peri;
+		mmc0 = &mmc_0;
+		serial0 = &serial_0;
+		serial1 = &serial_1;
+		serial2 = &serial_2;
+		i2c0 = &i2c_0;
+		i2c1 = &i2c_1;
+		i2c2 = &i2c_2;
+		i2c3 = &i2c_3;
+		i2c4 = &i2c_4;
+		i2c5 = &i2c_5;
+		i2c6 = &i2c_6;
+		i2c7 = &hsi2c_0;
+		i2c8 = &hsi2c_1;
+		i2c9 = &hsi2c_2;
+		i2c10 = &hsi2c_3;
+		i2c11 = &hsi2c_4;
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>,
+				     <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
+	};
+
+	/* Main system clock (XTCXO); external, must be 26 MHz */
+	oscclk: clock-oscclk {
+		compatible = "fixed-clock";
+		clock-output-names = "oscclk";
+		#clock-cells = <0>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0>;
+			enable-method = "psci";
+		};
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x1>;
+			enable-method = "psci";
+		};
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x2>;
+			enable-method = "psci";
+		};
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x3>;
+			enable-method = "psci";
+		};
+		cpu4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x100>;
+			enable-method = "psci";
+		};
+		cpu5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x101>;
+			enable-method = "psci";
+		};
+		cpu6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x102>;
+			enable-method = "psci";
+		};
+		cpu7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x103>;
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		/* Hypervisor Virtual Timer interrupt is not wired to GIC */
+		interrupts =
+		     <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+		     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+		     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+		     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x20000000>;
+
+		chipid@10000000 {
+			compatible = "samsung,exynos850-chipid";
+			reg = <0x10000000 0x100>;
+		};
+
+		timer@10040000 {
+			compatible = "samsung,exynos4210-mct";
+			reg = <0x10040000 0x800>;
+			interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&oscclk>, <&cmu_peri CLK_GOUT_MCT_PCLK>;
+			clock-names = "fin_pll", "mct";
+		};
+
+		gic: interrupt-controller@12a01000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			reg = <0x12a01000 0x1000>,
+			      <0x12a02000 0x2000>,
+			      <0x12a04000 0x2000>,
+			      <0x12a06000 0x2000>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) |
+						 IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		pmu_system_controller: system-controller@11860000 {
+			compatible = "samsung,exynos850-pmu", "syscon";
+			reg = <0x11860000 0x10000>;
+			clocks = <&cmu_apm CLK_GOUT_PMU_ALIVE_PCLK>;
+
+			reboot: syscon-reboot {
+				compatible = "syscon-reboot";
+				regmap = <&pmu_system_controller>;
+				offset = <0x3a00>; /* SYSTEM_CONFIGURATION */
+				mask = <0x2>; /* SWRESET_SYSTEM */
+				value = <0x2>; /* reset value */
+			};
+		};
+
+		watchdog_cl0: watchdog@10050000 {
+			compatible = "samsung,exynos850-wdt";
+			reg = <0x10050000 0x100>;
+			interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_peri CLK_GOUT_WDT0_PCLK>, <&oscclk>;
+			clock-names = "watchdog", "watchdog_src";
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			samsung,cluster-index = <0>;
+			status = "disabled";
+		};
+
+		watchdog_cl1: watchdog@10060000 {
+			compatible = "samsung,exynos850-wdt";
+			reg = <0x10060000 0x100>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_peri CLK_GOUT_WDT1_PCLK>, <&oscclk>;
+			clock-names = "watchdog", "watchdog_src";
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			samsung,cluster-index = <1>;
+			status = "disabled";
+		};
+
+		cmu_peri: clock-controller@10030000 {
+			compatible = "samsung,exynos850-cmu-peri";
+			reg = <0x10030000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>, <&cmu_top CLK_DOUT_PERI_BUS>,
+				 <&cmu_top CLK_DOUT_PERI_UART>,
+				 <&cmu_top CLK_DOUT_PERI_IP>;
+			clock-names = "oscclk", "dout_peri_bus",
+				      "dout_peri_uart", "dout_peri_ip";
+		};
+
+		cmu_apm: clock-controller@11800000 {
+			compatible = "samsung,exynos850-cmu-apm";
+			reg = <0x11800000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>, <&cmu_top CLK_DOUT_CLKCMU_APM_BUS>;
+			clock-names = "oscclk", "dout_clkcmu_apm_bus";
+		};
+
+		cmu_cmgp: clock-controller@11c00000 {
+			compatible = "samsung,exynos850-cmu-cmgp";
+			reg = <0x11c00000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>, <&cmu_apm CLK_GOUT_CLKCMU_CMGP_BUS>;
+			clock-names = "oscclk", "gout_clkcmu_cmgp_bus";
+		};
+
+		cmu_core: clock-controller@12000000 {
+			compatible = "samsung,exynos850-cmu-core";
+			reg = <0x12000000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>, <&cmu_top CLK_DOUT_CORE_BUS>,
+				 <&cmu_top CLK_DOUT_CORE_CCI>,
+				 <&cmu_top CLK_DOUT_CORE_MMC_EMBD>,
+				 <&cmu_top CLK_DOUT_CORE_SSS>;
+			clock-names = "oscclk", "dout_core_bus",
+				      "dout_core_cci", "dout_core_mmc_embd",
+				      "dout_core_sss";
+		};
+
+		cmu_top: clock-controller@120e0000 {
+			compatible = "samsung,exynos850-cmu-top";
+			reg = <0x120e0000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>;
+			clock-names = "oscclk";
+		};
+
+		cmu_dpu: clock-controller@13000000 {
+			compatible = "samsung,exynos850-cmu-dpu";
+			reg = <0x13000000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>, <&cmu_top CLK_DOUT_DPU>;
+			clock-names = "oscclk", "dout_dpu";
+		};
+
+		cmu_hsi: clock-controller@13400000 {
+			compatible = "samsung,exynos850-cmu-hsi";
+			reg = <0x13400000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>,
+				 <&cmu_top CLK_DOUT_HSI_BUS>,
+				 <&cmu_top CLK_DOUT_HSI_MMC_CARD>,
+				 <&cmu_top CLK_DOUT_HSI_USB20DRD>;
+			clock-names = "oscclk", "dout_hsi_bus",
+				      "dout_hsi_mmc_card", "dout_hsi_usb20drd";
+		};
+
+		pinctrl_alive: pinctrl@11850000 {
+			compatible = "samsung,exynos850-pinctrl";
+			reg = <0x11850000 0x1000>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos850-wakeup-eint";
+			};
+		};
+
+		pinctrl_cmgp: pinctrl@11c30000 {
+			compatible = "samsung,exynos850-pinctrl";
+			reg = <0x11c30000 0x1000>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos850-wakeup-eint";
+			};
+		};
+
+		pinctrl_core: pinctrl@12070000 {
+			compatible = "samsung,exynos850-pinctrl";
+			reg = <0x12070000 0x1000>;
+			interrupts = <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_hsi: pinctrl@13430000 {
+			compatible = "samsung,exynos850-pinctrl";
+			reg = <0x13430000 0x1000>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_peri: pinctrl@139b0000 {
+			compatible = "samsung,exynos850-pinctrl";
+			reg = <0x139b0000 0x1000>;
+			interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_aud: pinctrl@14a60000 {
+			compatible = "samsung,exynos850-pinctrl";
+			reg = <0x14a60000 0x1000>;
+		};
+
+		rtc: rtc@11a30000 {
+			compatible = "samsung,s3c6410-rtc";
+			reg = <0x11a30000 0x100>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_apm CLK_GOUT_RTC_PCLK>;
+			clock-names = "rtc";
+			status = "disabled";
+		};
+
+		mmc_0: mmc@12100000 {
+			compatible = "samsung,exynos7-dw-mshc-smu";
+			reg = <0x12100000 0x2000>;
+			interrupts = <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&cmu_core CLK_GOUT_MMC_EMBD_ACLK>,
+				 <&cmu_core CLK_GOUT_MMC_EMBD_SDCLKIN>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x40>;
+			status = "disabled";
+		};
+
+		i2c_0: i2c@13830000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13830000 0x100>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+			clocks = <&cmu_peri CLK_GOUT_I2C0_PCLK>;
+			clock-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c_1: i2c@13840000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13840000 0x100>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_pins>;
+			clocks = <&cmu_peri CLK_GOUT_I2C1_PCLK>;
+			clock-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c_2: i2c@13850000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13850000 0x100>;
+			interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_pins>;
+			clocks = <&cmu_peri CLK_GOUT_I2C2_PCLK>;
+			clock-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c_3: i2c@13860000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13860000 0x100>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c3_pins>;
+			clocks = <&cmu_peri CLK_GOUT_I2C3_PCLK>;
+			clock-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c_4: i2c@13870000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13870000 0x100>;
+			interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c4_pins>;
+			clocks = <&cmu_peri CLK_GOUT_I2C4_PCLK>;
+			clock-names = "i2c";
+			status = "disabled";
+		};
+
+		/* I2C_5 (also called CAM_PMIC_I2C in TRM) */
+		i2c_5: i2c@13880000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13880000 0x100>;
+			interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c5_pins>;
+			clocks = <&cmu_peri CLK_GOUT_I2C5_PCLK>;
+			clock-names = "i2c";
+			status = "disabled";
+		};
+
+		/* I2C_6 (also called MOTOR_I2C in TRM) */
+		i2c_6: i2c@13890000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13890000 0x100>;
+			interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c6_pins>;
+			clocks = <&cmu_peri CLK_GOUT_I2C6_PCLK>;
+			clock-names = "i2c";
+			status = "disabled";
+		};
+
+		sysreg_peri: syscon@10020000 {
+			compatible = "samsung,exynos850-sysreg", "syscon";
+			reg = <0x10020000 0x10000>;
+			clocks = <&cmu_peri CLK_GOUT_SYSREG_PERI_PCLK>;
+		};
+
+		sysreg_cmgp: syscon@11c20000 {
+			compatible = "samsung,exynos850-sysreg", "syscon";
+			reg = <0x11c20000 0x10000>;
+			clocks = <&cmu_cmgp CLK_GOUT_SYSREG_CMGP_PCLK>;
+		};
+
+		usi_uart: usi@138200c0 {
+			compatible = "samsung,exynos850-usi";
+			reg = <0x138200c0 0x20>;
+			samsung,sysreg = <&sysreg_peri 0x1010>;
+			samsung,mode = <USI_V2_UART>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peri CLK_GOUT_UART_PCLK>,
+				 <&cmu_peri CLK_GOUT_UART_IPCLK>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			serial_0: serial@13820000 {
+				compatible = "samsung,exynos850-uart";
+				reg = <0x13820000 0xc0>;
+				interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart0_pins>;
+				clocks = <&cmu_peri CLK_GOUT_UART_PCLK>,
+					 <&cmu_peri CLK_GOUT_UART_IPCLK>;
+				clock-names = "uart", "clk_uart_baud0";
+				status = "disabled";
+			};
+		};
+
+		usi_hsi2c_0: usi@138a00c0 {
+			compatible = "samsung,exynos850-usi";
+			reg = <0x138a00c0 0x20>;
+			samsung,sysreg = <&sysreg_peri 0x1020>;
+			samsung,mode = <USI_V2_I2C>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peri CLK_GOUT_HSI2C0_PCLK>,
+				 <&cmu_peri CLK_GOUT_HSI2C0_IPCLK>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			hsi2c_0: i2c@138a0000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x138a0000 0xc0>;
+				interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c0_pins>;
+				clocks = <&cmu_peri CLK_GOUT_HSI2C0_IPCLK>,
+					 <&cmu_peri CLK_GOUT_HSI2C0_PCLK>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				status = "disabled";
+			};
+		};
+
+		usi_hsi2c_1: usi@138b00c0 {
+			compatible = "samsung,exynos850-usi";
+			reg = <0x138b00c0 0x20>;
+			samsung,sysreg = <&sysreg_peri 0x1030>;
+			samsung,mode = <USI_V2_I2C>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peri CLK_GOUT_HSI2C1_PCLK>,
+				 <&cmu_peri CLK_GOUT_HSI2C1_IPCLK>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			hsi2c_1: i2c@138b0000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x138b0000 0xc0>;
+				interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c1_pins>;
+				clocks = <&cmu_peri CLK_GOUT_HSI2C1_IPCLK>,
+					 <&cmu_peri CLK_GOUT_HSI2C1_PCLK>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				status = "disabled";
+			};
+		};
+
+		usi_hsi2c_2: usi@138c00c0 {
+			compatible = "samsung,exynos850-usi";
+			reg = <0x138c00c0 0x20>;
+			samsung,sysreg = <&sysreg_peri 0x1040>;
+			samsung,mode = <USI_V2_I2C>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peri CLK_GOUT_HSI2C2_PCLK>,
+				 <&cmu_peri CLK_GOUT_HSI2C2_IPCLK>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			hsi2c_2: i2c@138c0000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x138c0000 0xc0>;
+				interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c2_pins>;
+				clocks = <&cmu_peri CLK_GOUT_HSI2C2_IPCLK>,
+					 <&cmu_peri CLK_GOUT_HSI2C2_PCLK>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				status = "disabled";
+			};
+		};
+
+		usi_spi_0: usi@139400c0 {
+			compatible = "samsung,exynos850-usi";
+			reg = <0x139400c0 0x20>;
+			samsung,sysreg = <&sysreg_peri 0x1050>;
+			samsung,mode = <USI_V2_SPI>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_peri CLK_GOUT_SPI0_PCLK>,
+				 <&cmu_peri CLK_GOUT_SPI0_IPCLK>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+		};
+
+		usi_cmgp0: usi@11d000c0 {
+			compatible = "samsung,exynos850-usi";
+			reg = <0x11d000c0 0x20>;
+			samsung,sysreg = <&sysreg_cmgp 0x2000>;
+			samsung,mode = <USI_V2_I2C>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI0_PCLK>,
+				 <&cmu_cmgp CLK_GOUT_CMGP_USI0_IPCLK>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			hsi2c_3: i2c@11d00000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x11d00000 0xc0>;
+				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c3_pins>;
+				clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI0_IPCLK>,
+					 <&cmu_cmgp CLK_GOUT_CMGP_USI0_PCLK>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				status = "disabled";
+			};
+
+			serial_1: serial@11d00000 {
+				compatible = "samsung,exynos850-uart";
+				reg = <0x11d00000 0xc0>;
+				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart1_single_pins>;
+				clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI0_PCLK>,
+					 <&cmu_cmgp CLK_GOUT_CMGP_USI0_IPCLK>;
+				clock-names = "uart", "clk_uart_baud0";
+				status = "disabled";
+			};
+		};
+
+		usi_cmgp1: usi@11d200c0 {
+			compatible = "samsung,exynos850-usi";
+			reg = <0x11d200c0 0x20>;
+			samsung,sysreg = <&sysreg_cmgp 0x2010>;
+			samsung,mode = <USI_V2_I2C>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI1_PCLK>,
+				 <&cmu_cmgp CLK_GOUT_CMGP_USI1_IPCLK>;
+			clock-names = "pclk", "ipclk";
+			status = "disabled";
+
+			hsi2c_4: i2c@11d20000 {
+				compatible = "samsung,exynosautov9-hsi2c";
+				reg = <0x11d20000 0xc0>;
+				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&hsi2c4_pins>;
+				clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI1_IPCLK>,
+					 <&cmu_cmgp CLK_GOUT_CMGP_USI1_PCLK>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				status = "disabled";
+			};
+
+			serial_2: serial@11d20000 {
+				compatible = "samsung,exynos850-uart";
+				reg = <0x11d20000 0xc0>;
+				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart2_single_pins>;
+				clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI1_PCLK>,
+					 <&cmu_cmgp CLK_GOUT_CMGP_USI1_IPCLK>;
+				clock-names = "uart", "clk_uart_baud0";
+				status = "disabled";
+			};
+		};
+	};
+};
+
+#include "exynos850-pinctrl.dtsi"
diff --git a/arch/arm64/boot/dts/exynos/exynosautov9-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynosautov9-pinctrl.dtsi
index 2407b03b5404..ef0349d1c3d0 100644
--- a/arch/arm64/boot/dts/exynos/exynosautov9-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynosautov9-pinctrl.dtsi
@@ -11,7 +11,7 @@
 #include <dt-bindings/pinctrl/samsung.h>
 
 &pinctrl_alive {
-	gpa0: gpa0 {
+	gpa0: gpa0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
@@ -27,7 +27,7 @@
 			     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
-	gpa1: gpa1 {
+	gpa1: gpa1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
@@ -47,7 +47,7 @@
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
 	};
 
-	gpq0: gpq0 {
+	gpq0: gpq0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -69,7 +69,7 @@
 };
 
 &pinctrl_aud {
-	gpb0: gpb0 {
+	gpb0: gpb0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -77,7 +77,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb1: gpb1 {
+	gpb1: gpb1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -85,7 +85,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb2: gpb2 {
+	gpb2: gpb2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -93,7 +93,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb3: gpb3 {
+	gpb3: gpb3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -199,7 +199,7 @@
 };
 
 &pinctrl_fsys0 {
-	gpf0: gpf0 {
+	gpf0: gpf0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -207,7 +207,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf1: gpf1 {
+	gpf1: gpf1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -355,7 +355,7 @@
 };
 
 &pinctrl_fsys1 {
-	gpf8: gpf8 {
+	gpf8: gpf8-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -393,7 +393,7 @@
 };
 
 &pinctrl_fsys2 {
-	gpf2: gpf2 {
+	gpf2: gpf2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -401,7 +401,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf3: gpf3 {
+	gpf3: gpf3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -409,7 +409,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf4: gpf4 {
+	gpf4: gpf4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -417,7 +417,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf5: gpf5 {
+	gpf5: gpf5-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -425,7 +425,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf6: gpf6 {
+	gpf6: gpf6-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -499,7 +499,7 @@
 };
 
 &pinctrl_peric0 {
-	gpp0: gpp0 {
+	gpp0: gpp0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -507,7 +507,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpp1: gpp1 {
+	gpp1: gpp1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -515,7 +515,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpp2: gpp2 {
+	gpp2: gpp2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -523,7 +523,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpg0: gpg0 {
+	gpg0: gpg0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -833,7 +833,7 @@
 };
 
 &pinctrl_peric1 {
-	gpp3: gpp3 {
+	gpp3: gpp3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -841,7 +841,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpp4: gpp4 {
+	gpp4: gpp4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -849,7 +849,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpp5: gpp5 {
+	gpp5: gpp5-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -857,7 +857,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpg1: gpg1 {
+	gpg1: gpg1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -865,7 +865,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpg2: gpg2 {
+	gpg2: gpg2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -873,7 +873,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpg3: gpg3 {
+	gpg3: gpg3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
diff --git a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
index de8fcb82eaec..807d500d6022 100644
--- a/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynosautov9.dtsi
@@ -208,7 +208,7 @@
 			reg = <0x10450000 0x1000>;
 
 			wakeup-interrupt-controller {
-				compatible = "samsung,exynos7-wakeup-eint";
+				compatible = "samsung,exynosautov9-wakeup-eint";
 			};
 		};
 
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 6d8f0a532587..7f51b537df40 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -1,14 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
 
-# required for overlay support
-DTC_FLAGS_fsl-ls1028a-qds := -@
-DTC_FLAGS_fsl-ls1028a-qds-13bb := -@
-DTC_FLAGS_fsl-ls1028a-qds-65bb := -@
-DTC_FLAGS_fsl-ls1028a-qds-7777 := -@
-DTC_FLAGS_fsl-ls1028a-qds-85bb := -@
-DTC_FLAGS_fsl-ls1028a-qds-899b := -@
-DTC_FLAGS_fsl-ls1028a-qds-9999 := -@
-
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frwy.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-oxalis.dtb
@@ -21,12 +12,6 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var2.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var3-ads2.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var4.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds.dtb
-dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-13bb.dtb
-dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-65bb.dtb
-dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-7777.dtb
-dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-85bb.dtb
-dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-899b.dtb
-dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-9999.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-rdb.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb
@@ -49,9 +34,24 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2162a-qds.dtb
 
+fsl-ls1028a-qds-13bb-dtbs := fsl-ls1028a-qds.dtb fsl-ls1028a-qds-13bb.dtbo
+fsl-ls1028a-qds-65bb-dtbs := fsl-ls1028a-qds.dtb fsl-ls1028a-qds-65bb.dtbo
+fsl-ls1028a-qds-7777-dtbs := fsl-ls1028a-qds.dtb fsl-ls1028a-qds-7777.dtbo
+fsl-ls1028a-qds-85bb-dtbs := fsl-ls1028a-qds.dtb fsl-ls1028a-qds-85bb.dtbo
+fsl-ls1028a-qds-899b-dtbs := fsl-ls1028a-qds.dtb fsl-ls1028a-qds-899b.dtbo
+fsl-ls1028a-qds-9999-dtbs := fsl-ls1028a-qds.dtb fsl-ls1028a-qds-9999.dtbo
+
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-13bb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-65bb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-7777.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-85bb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-899b.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-9999.dtb
+
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-beacon-kit.dtb
-dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-ddr4-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-emcon-avari.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-ctouch2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-edimm2.2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-n801x-s.dtb
@@ -63,6 +63,11 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7901.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7902.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7903.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-dahlia.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-dev.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-dahlia.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-dev.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-beacon-kit.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-bsh-smm-s2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mn-bsh-smm-s2pro.dtb
@@ -94,6 +99,24 @@ dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-eval-v3.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb
 
+imx8mm-venice-gw72xx-0x-imx219-dtbs	:= imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-imx219.dtbo
+imx8mm-venice-gw72xx-0x-rs232-rts-dtbs	:= imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rs232-rts.dtbo
+imx8mm-venice-gw72xx-0x-rs422-dtbs	:= imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rs422.dtbo
+imx8mm-venice-gw72xx-0x-rs485-dtbs	:= imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rs485.dtbo
+imx8mm-venice-gw73xx-0x-imx219-dtbs	:= imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-imx219.dtbo
+imx8mm-venice-gw73xx-0x-rs232-rts-dtbs	:= imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-rs232-rts.dtbo
+imx8mm-venice-gw73xx-0x-rs422-dtbs	:= imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-rs422.dtbo
+imx8mm-venice-gw73xx-0x-rs485-dtbs	:= imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-rs485.dtbo
+
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x-imx219.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x-rs232-rts.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x-rs422.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x-rs485.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-imx219.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-rs232-rts.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-rs422.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-rs485.dtb
+
 dtb-$(CONFIG_ARCH_S32) += s32g274a-evb.dtb
 dtb-$(CONFIG_ARCH_S32) += s32g274a-rdb2.dtb
 dtb-$(CONFIG_ARCH_S32) += s32v234-evb.dtb
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
index d74e738e4070..c03f4e183389 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
@@ -157,6 +157,10 @@
 	};
 };
 
+&ftm_alarm0 {
+	status = "okay";
+};
+
 &gpio1 {
 	gpio-line-names =
 		"", "", "", "", "", "", "", "",
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dts
index f748a2c12a70..f826392c23fa 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dts
@@ -12,102 +12,80 @@
 /dts-v1/;
 /plugin/;
 
-/ {
-	fragment@0 {
-		target = <&mdio_slot1>;
-
-		__overlay__ {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			slot1_sgmii: ethernet-phy@2 {
-				/* AQR112 */
-				reg = <0x2>;
-				compatible = "ethernet-phy-ieee802.3-c45";
-			};
-		};
-	};
-
-	fragment@1 {
-		target = <&enetc_port0>;
-
-		__overlay__ {
-			phy-handle = <&slot1_sgmii>;
-			phy-mode = "usxgmii";
-			managed = "in-band-status";
-			status = "okay";
-		};
+&mdio_slot1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	slot1_sgmii: ethernet-phy@2 {
+		/* AQR112 */
+		reg = <0x2>;
+		compatible = "ethernet-phy-ieee802.3-c45";
 	};
+};
 
-	fragment@2 {
-		target = <&mdio_slot2>;
-
-		__overlay__ {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			/* 4 ports on AQR412 */
-			slot2_qxgmii0: ethernet-phy@0 {
-				reg = <0x0>;
-				compatible = "ethernet-phy-ieee802.3-c45";
-			};
-
-			slot2_qxgmii1: ethernet-phy@1 {
-				reg = <0x1>;
-				compatible = "ethernet-phy-ieee802.3-c45";
-			};
+&enetc_port0 {
+	phy-handle = <&slot1_sgmii>;
+	phy-mode = "usxgmii";
+	managed = "in-band-status";
+	status = "okay";
+};
 
-			slot2_qxgmii2: ethernet-phy@2 {
-				reg = <0x2>;
-				compatible = "ethernet-phy-ieee802.3-c45";
-			};
+&mdio_slot2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
 
-			slot2_qxgmii3: ethernet-phy@3 {
-				reg = <0x3>;
-				compatible = "ethernet-phy-ieee802.3-c45";
-			};
-		};
+	/* 4 ports on AQR412 */
+	slot2_qxgmii0: ethernet-phy@0 {
+		reg = <0x0>;
+		compatible = "ethernet-phy-ieee802.3-c45";
 	};
 
-	fragment@3 {
-		target = <&mscc_felix_ports>;
+	slot2_qxgmii1: ethernet-phy@1 {
+		reg = <0x1>;
+		compatible = "ethernet-phy-ieee802.3-c45";
+	};
 
-		__overlay__ {
-			port@0 {
-				status = "okay";
-				phy-handle = <&slot2_qxgmii0>;
-				phy-mode = "usxgmii";
-				managed = "in-band-status";
-			};
+	slot2_qxgmii2: ethernet-phy@2 {
+		reg = <0x2>;
+		compatible = "ethernet-phy-ieee802.3-c45";
+	};
 
-			port@1 {
-				status = "okay";
-				phy-handle = <&slot2_qxgmii1>;
-				phy-mode = "usxgmii";
-				managed = "in-band-status";
-			};
+	slot2_qxgmii3: ethernet-phy@3 {
+		reg = <0x3>;
+		compatible = "ethernet-phy-ieee802.3-c45";
+	};
+};
 
-			port@2 {
-				status = "okay";
-				phy-handle = <&slot2_qxgmii2>;
-				phy-mode = "usxgmii";
-				managed = "in-band-status";
-			};
+&mscc_felix_ports {
+	port@0 {
+		status = "okay";
+		phy-handle = <&slot2_qxgmii0>;
+		phy-mode = "usxgmii";
+		managed = "in-band-status";
+	};
 
-			port@3 {
-				status = "okay";
-				phy-handle = <&slot2_qxgmii3>;
-				phy-mode = "usxgmii";
-				managed = "in-band-status";
-			};
-		};
+	port@1 {
+		status = "okay";
+		phy-handle = <&slot2_qxgmii1>;
+		phy-mode = "usxgmii";
+		managed = "in-band-status";
 	};
 
-	fragment@4 {
-		target = <&mscc_felix>;
+	port@2 {
+		status = "okay";
+		phy-handle = <&slot2_qxgmii2>;
+		phy-mode = "usxgmii";
+		managed = "in-band-status";
+	};
 
-		__overlay__ {
-			status = "okay";
-		};
+	port@3 {
+		status = "okay";
+		phy-handle = <&slot2_qxgmii3>;
+		phy-mode = "usxgmii";
+		managed = "in-band-status";
 	};
 };
+
+&mscc_felix {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts
index 8ffb707a1576..40d34c8384a5 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts
@@ -11,98 +11,76 @@
 /dts-v1/;
 /plugin/;
 
-/ {
-	fragment@0 {
-		target = <&mdio_slot1>;
-
-		__overlay__ {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			slot1_sgmii: ethernet-phy@2 {
-				/* AQR112 */
-				reg = <0x2>;
-				compatible = "ethernet-phy-ieee802.3-c45";
-			};
-		};
-	};
-
-	fragment@1 {
-		target = <&enetc_port0>;
-
-		__overlay__ {
-			phy-handle = <&slot1_sgmii>;
-			phy-mode = "2500base-x";
-			managed = "in-band-status";
-			status = "okay";
-		};
+&mdio_slot1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	slot1_sgmii: ethernet-phy@2 {
+		/* AQR112 */
+		reg = <0x2>;
+		compatible = "ethernet-phy-ieee802.3-c45";
 	};
+};
 
-	fragment@2 {
-		target = <&mdio_slot2>;
-
-		__overlay__ {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			/* 4 ports on VSC8514 */
-			slot2_qsgmii0: ethernet-phy@8 {
-				reg = <0x8>;
-			};
-
-			slot2_qsgmii1: ethernet-phy@9 {
-				reg = <0x9>;
-			};
+&enetc_port0 {
+	phy-handle = <&slot1_sgmii>;
+	phy-mode = "2500base-x";
+	managed = "in-band-status";
+	status = "okay";
+};
 
-			slot2_qsgmii2: ethernet-phy@a {
-				reg = <0xa>;
-			};
+&mdio_slot2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
 
-			slot2_qsgmii3: ethernet-phy@b {
-				reg = <0xb>;
-			};
-		};
+	/* 4 ports on VSC8514 */
+	slot2_qsgmii0: ethernet-phy@8 {
+		reg = <0x8>;
 	};
 
-	fragment@3 {
-		target = <&mscc_felix_ports>;
+	slot2_qsgmii1: ethernet-phy@9 {
+		reg = <0x9>;
+	};
 
-		__overlay__ {
-			port@0 {
-				status = "okay";
-				phy-handle = <&slot2_qsgmii0>;
-				phy-mode = "qsgmii";
-				managed = "in-band-status";
-			};
+	slot2_qsgmii2: ethernet-phy@a {
+		reg = <0xa>;
+	};
 
-			port@1 {
-				status = "okay";
-				phy-handle = <&slot2_qsgmii1>;
-				phy-mode = "qsgmii";
-				managed = "in-band-status";
-			};
+	slot2_qsgmii3: ethernet-phy@b {
+		reg = <0xb>;
+	};
+};
 
-			port@2 {
-				status = "okay";
-				phy-handle = <&slot2_qsgmii2>;
-				phy-mode = "qsgmii";
-				managed = "in-band-status";
-			};
+&mscc_felix_ports {
+	port@0 {
+		status = "okay";
+		phy-handle = <&slot2_qsgmii0>;
+		phy-mode = "qsgmii";
+		managed = "in-band-status";
+	};
 
-			port@3 {
-				status = "okay";
-				phy-handle = <&slot2_qsgmii3>;
-				phy-mode = "qsgmii";
-				managed = "in-band-status";
-			};
-		};
+	port@1 {
+		status = "okay";
+		phy-handle = <&slot2_qsgmii1>;
+		phy-mode = "qsgmii";
+		managed = "in-band-status";
 	};
 
-	fragment@4 {
-		target = <&mscc_felix>;
+	port@2 {
+		status = "okay";
+		phy-handle = <&slot2_qsgmii2>;
+		phy-mode = "qsgmii";
+		managed = "in-band-status";
+	};
 
-		__overlay__ {
-			status = "okay";
-		};
+	port@3 {
+		status = "okay";
+		phy-handle = <&slot2_qsgmii3>;
+		phy-mode = "qsgmii";
+		managed = "in-band-status";
 	};
 };
+
+&mscc_felix {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dts
index eb6a1e674f10..1dff68d7484b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dts
@@ -12,71 +12,58 @@
 /dts-v1/;
 /plugin/;
 
-/ {
-	fragment@0 {
-		target = <&mdio_slot1>;
+&mdio_slot1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
 
-		__overlay__ {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			/* 4 ports on AQR412 */
-			slot1_sxgmii0: ethernet-phy@0 {
-				reg = <0x0>;
-				compatible = "ethernet-phy-ieee802.3-c45";
-			};
-
-			slot1_sxgmii1: ethernet-phy@1 {
-				reg = <0x1>;
-				compatible = "ethernet-phy-ieee802.3-c45";
-			};
-
-			slot1_sxgmii2: ethernet-phy@2 {
-				reg = <0x2>;
-				compatible = "ethernet-phy-ieee802.3-c45";
-			};
+	/* 4 ports on AQR412 */
+	slot1_sxgmii0: ethernet-phy@0 {
+		reg = <0x0>;
+		compatible = "ethernet-phy-ieee802.3-c45";
+	};
 
-			slot1_sxgmii3: ethernet-phy@3 {
-				reg = <0x3>;
-				compatible = "ethernet-phy-ieee802.3-c45";
-			};
-		};
+	slot1_sxgmii1: ethernet-phy@1 {
+		reg = <0x1>;
+		compatible = "ethernet-phy-ieee802.3-c45";
 	};
 
-	fragment@1 {
-		target = <&mscc_felix_ports>;
+	slot1_sxgmii2: ethernet-phy@2 {
+		reg = <0x2>;
+		compatible = "ethernet-phy-ieee802.3-c45";
+	};
 
-		__overlay__ {
-			port@0 {
-				status = "okay";
-				phy-handle = <&slot1_sxgmii0>;
-				phy-mode = "2500base-x";
-			};
+	slot1_sxgmii3: ethernet-phy@3 {
+		reg = <0x3>;
+		compatible = "ethernet-phy-ieee802.3-c45";
+	};
+};
 
-			port@1 {
-				status = "okay";
-				phy-handle = <&slot1_sxgmii1>;
-				phy-mode = "2500base-x";
-			};
+&mscc_felix_ports {
+	port@0 {
+		status = "okay";
+		phy-handle = <&slot1_sxgmii0>;
+		phy-mode = "2500base-x";
+	};
 
-			port@2 {
-				status = "okay";
-				phy-handle = <&slot1_sxgmii2>;
-				phy-mode = "2500base-x";
-			};
+	port@1 {
+		status = "okay";
+		phy-handle = <&slot1_sxgmii1>;
+		phy-mode = "2500base-x";
+	};
 
-			port@3 {
-				status = "okay";
-				phy-handle = <&slot1_sxgmii3>;
-				phy-mode = "2500base-x";
-			};
-		};
+	port@2 {
+		status = "okay";
+		phy-handle = <&slot1_sxgmii2>;
+		phy-mode = "2500base-x";
 	};
 
-	fragment@2 {
-		target = <&mscc_felix>;
-		__overlay__ {
-			status = "okay";
-		};
+	port@3 {
+		status = "okay";
+		phy-handle = <&slot1_sxgmii3>;
+		phy-mode = "2500base-x";
 	};
 };
+
+&mscc_felix {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-85bb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-85bb.dts
index 8e90c3088ba1..19424d349713 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-85bb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-85bb.dts
@@ -11,97 +11,75 @@
 /dts-v1/;
 /plugin/;
 
-/ {
-	fragment@0 {
-		target = <&mdio_slot1>;
+&mdio_slot1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
 
-		__overlay__ {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			slot1_sgmii: ethernet-phy@1c {
-				/* 1st port on VSC8234 */
-				reg = <0x1c>;
-			};
-		};
+	slot1_sgmii: ethernet-phy@1c {
+		/* 1st port on VSC8234 */
+		reg = <0x1c>;
 	};
+};
 
-	fragment@1 {
-		target = <&enetc_port0>;
-
-		__overlay__ {
-			phy-handle = <&slot1_sgmii>;
-			phy-mode = "sgmii";
-			managed = "in-band-status";
-			status = "okay";
-		};
-	};
-
-	fragment@2 {
-		target = <&mdio_slot2>;
-
-		__overlay__ {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			/* 4 ports on VSC8514 */
-			slot2_qsgmii0: ethernet-phy@8 {
-				reg = <0x8>;
-			};
-
-			slot2_qsgmii1: ethernet-phy@9 {
-				reg = <0x9>;
-			};
+&enetc_port0 {
+	phy-handle = <&slot1_sgmii>;
+	phy-mode = "sgmii";
+	managed = "in-band-status";
+	status = "okay";
+};
 
-			slot2_qsgmii2: ethernet-phy@a {
-				reg = <0xa>;
-			};
+&mdio_slot2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
 
-			slot2_qsgmii3: ethernet-phy@b {
-				reg = <0xb>;
-			};
-		};
+	/* 4 ports on VSC8514 */
+	slot2_qsgmii0: ethernet-phy@8 {
+		reg = <0x8>;
 	};
 
-	fragment@3 {
-		target = <&mscc_felix_ports>;
+	slot2_qsgmii1: ethernet-phy@9 {
+		reg = <0x9>;
+	};
 
-		__overlay__ {
-			port@0 {
-				status = "okay";
-				phy-handle = <&slot2_qsgmii0>;
-				phy-mode = "qsgmii";
-				managed = "in-band-status";
-			};
+	slot2_qsgmii2: ethernet-phy@a {
+		reg = <0xa>;
+	};
 
-			port@1 {
-				status = "okay";
-				phy-handle = <&slot2_qsgmii1>;
-				phy-mode = "qsgmii";
-				managed = "in-band-status";
-			};
+	slot2_qsgmii3: ethernet-phy@b {
+		reg = <0xb>;
+	};
+};
 
-			port@2 {
-				status = "okay";
-				phy-handle = <&slot2_qsgmii2>;
-				phy-mode = "qsgmii";
-				managed = "in-band-status";
-			};
+&mscc_felix_ports {
+	port@0 {
+		status = "okay";
+		phy-handle = <&slot2_qsgmii0>;
+		phy-mode = "qsgmii";
+		managed = "in-band-status";
+	};
 
-			port@3 {
-				status = "okay";
-				phy-handle = <&slot2_qsgmii3>;
-				phy-mode = "qsgmii";
-				managed = "in-band-status";
-			};
-		};
+	port@1 {
+		status = "okay";
+		phy-handle = <&slot2_qsgmii1>;
+		phy-mode = "qsgmii";
+		managed = "in-band-status";
 	};
 
-	fragment@4 {
-		target = <&mscc_felix>;
+	port@2 {
+		status = "okay";
+		phy-handle = <&slot2_qsgmii2>;
+		phy-mode = "qsgmii";
+		managed = "in-band-status";
+	};
 
-		__overlay__ {
-			status = "okay";
-		};
+	port@3 {
+		status = "okay";
+		phy-handle = <&slot2_qsgmii3>;
+		phy-mode = "qsgmii";
+		managed = "in-band-status";
 	};
 };
+
+&mscc_felix {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-899b.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-899b.dts
index 5d0a094e6c44..fb85847f778f 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-899b.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-899b.dts
@@ -11,65 +11,51 @@
 /dts-v1/;
 /plugin/;
 
-/ {
-	fragment@0 {
-		target = <&mdio_slot1>;
-		__overlay__ {
-			#address-cells = <1>;
-			#size-cells = <0>;
+&mdio_slot1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
 
-			/* VSC8234 */
-			slot1_sgmii0: ethernet-phy@1c {
-				reg = <0x1c>;
-			};
-
-			slot1_sgmii1: ethernet-phy@1d {
-				reg = <0x1d>;
-			};
+	/* VSC8234 */
+	slot1_sgmii0: ethernet-phy@1c {
+		reg = <0x1c>;
+	};
 
-			slot1_sgmii2: ethernet-phy@1e {
-				reg = <0x1e>;
-			};
+	slot1_sgmii1: ethernet-phy@1d {
+		reg = <0x1d>;
+	};
 
-			slot1_sgmii3: ethernet-phy@1f {
-				reg = <0x1f>;
-			};
-		};
+	slot1_sgmii2: ethernet-phy@1e {
+		reg = <0x1e>;
 	};
 
-	fragment@1 {
-		target = <&enetc_port0>;
-		__overlay__ {
-			phy-handle = <&slot1_sgmii0>;
-			phy-mode = "sgmii";
-			managed = "in-band-status";
-			status = "okay";
-		};
+	slot1_sgmii3: ethernet-phy@1f {
+		reg = <0x1f>;
 	};
+};
 
-	fragment@2 {
-		target = <&mscc_felix_ports>;
-		__overlay__ {
-			port@1 {
-				status = "okay";
-				phy-handle = <&slot1_sgmii1>;
-				phy-mode = "sgmii";
-				managed = "in-band-status";
-			};
+&enetc_port0 {
+	phy-handle = <&slot1_sgmii0>;
+	phy-mode = "sgmii";
+	managed = "in-band-status";
+	status = "okay";
+};
 
-			port@2 {
-				status = "okay";
-				phy-handle = <&slot1_sgmii2>;
-				phy-mode = "sgmii";
-				managed = "in-band-status";
-			};
-		};
+&mscc_felix_ports {
+	port@1 {
+		status = "okay";
+		phy-handle = <&slot1_sgmii1>;
+		phy-mode = "sgmii";
+		managed = "in-band-status";
 	};
 
-	fragment@3 {
-		target = <&mscc_felix>;
-		__overlay__ {
-			status = "okay";
-		};
+	port@2 {
+		status = "okay";
+		phy-handle = <&slot1_sgmii2>;
+		phy-mode = "sgmii";
+		managed = "in-band-status";
 	};
 };
+
+&mscc_felix {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-9999.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-9999.dts
index 1ef743c48e84..63e46fad22bd 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-9999.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-9999.dts
@@ -11,69 +11,58 @@
 /dts-v1/;
 /plugin/;
 
-/ {
-	fragment@0 {
-		target = <&mdio_slot1>;
-		__overlay__ {
-			#address-cells = <1>;
-			#size-cells = <0>;
+&mdio_slot1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
 
-			/* VSC8234 */
-			slot1_sgmii0: ethernet-phy@1c {
-				reg = <0x1c>;
-			};
-
-			slot1_sgmii1: ethernet-phy@1d {
-				reg = <0x1d>;
-			};
+	/* VSC8234 */
+	slot1_sgmii0: ethernet-phy@1c {
+		reg = <0x1c>;
+	};
 
-			slot1_sgmii2: ethernet-phy@1e {
-				reg = <0x1e>;
-			};
+	slot1_sgmii1: ethernet-phy@1d {
+		reg = <0x1d>;
+	};
 
-			slot1_sgmii3: ethernet-phy@1f {
-				reg = <0x1f>;
-			};
-		};
+	slot1_sgmii2: ethernet-phy@1e {
+		reg = <0x1e>;
 	};
 
-	fragment@1 {
-		target = <&mscc_felix_ports>;
-		__overlay__ {
-			port@0 {
-				status = "okay";
-				phy-handle = <&slot1_sgmii0>;
-				phy-mode = "sgmii";
-				managed = "in-band-status";
-			};
+	slot1_sgmii3: ethernet-phy@1f {
+		reg = <0x1f>;
+	};
+};
 
-			port@1 {
-				status = "okay";
-				phy-handle = <&slot1_sgmii1>;
-				phy-mode = "sgmii";
-				managed = "in-band-status";
-			};
+&mscc_felix_ports {
+	port@0 {
+		status = "okay";
+		phy-handle = <&slot1_sgmii0>;
+		phy-mode = "sgmii";
+		managed = "in-band-status";
+	};
 
-			port@2 {
-				status = "okay";
-				phy-handle = <&slot1_sgmii2>;
-				phy-mode = "sgmii";
-				managed = "in-band-status";
-			};
+	port@1 {
+		status = "okay";
+		phy-handle = <&slot1_sgmii1>;
+		phy-mode = "sgmii";
+		managed = "in-band-status";
+	};
 
-			port@3 {
-				status = "okay";
-				phy-handle = <&slot1_sgmii3>;
-				phy-mode = "sgmii";
-				managed = "in-band-status";
-			};
-		};
+	port@2 {
+		status = "okay";
+		phy-handle = <&slot1_sgmii2>;
+		phy-mode = "sgmii";
+		managed = "in-band-status";
 	};
 
-	fragment@2 {
-		target = <&mscc_felix>;
-		__overlay__ {
-			status = "okay";
-		};
+	port@3 {
+		status = "okay";
+		phy-handle = <&slot1_sgmii3>;
+		phy-mode = "sgmii";
+		managed = "in-band-status";
 	};
 };
+
+&mscc_felix {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
index 177bc1405f0f..19d3952dbffe 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -107,6 +107,30 @@
 				reg = <5>;
 			};
 		};
+
+		mdio_slot1: mdio@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		mdio_slot2: mdio@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		mdio_slot3: mdio@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		mdio_slot4: mdio@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 5bb8c26e0825..088271d49139 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -224,6 +224,17 @@
 			little-endian;
 		};
 
+		efuse@1e80000 {
+			compatible = "fsl,ls1028a-sfp";
+			reg = <0x0 0x1e80000 0x0 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ls1028a_uid: unique-id@1c {
+				reg = <0x1c 0x8>;
+			};
+		};
+
 		scfg: syscon@1fc0000 {
 			compatible = "fsl,ls1028a-scfg", "syscon";
 			reg = <0x0 0x1fc0000 0x0 0x10000>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 3ed1f2c51cad..18e529118476 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -253,18 +253,18 @@
 				interrupt-controller;
 				reg = <0x14 4>;
 				interrupt-map =
-					<0 0 &gic 0 0 GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
-					<1 0 &gic 0 0 GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
-					<2 0 &gic 0 0 GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-					<3 0 &gic 0 0 GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
-					<4 0 &gic 0 0 GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
-					<5 0 &gic 0 0 GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
-					<6 0 &gic 0 0 GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
-					<7 0 &gic 0 0 GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
-					<8 0 &gic 0 0 GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-					<9 0 &gic 0 0 GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-					<10 0 &gic 0 0 GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
-					<11 0 &gic 0 0 GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+					<0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+					<1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+					<2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+					<3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+					<4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+					<5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+					<6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					<7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+					<8 0 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					<9 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+					<10 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+					<11 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-map-mask = <0xffffffff 0x0>;
 			};
 		};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index 3cb9c21d2775..1282b61da8a5 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -293,18 +293,18 @@
 				interrupt-controller;
 				reg = <0x14 4>;
 				interrupt-map =
-					<0 0 &gic 0 0 GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
-					<1 0 &gic 0 0 GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
-					<2 0 &gic 0 0 GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-					<3 0 &gic 0 0 GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
-					<4 0 &gic 0 0 GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
-					<5 0 &gic 0 0 GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
-					<6 0 &gic 0 0 GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
-					<7 0 &gic 0 0 GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
-					<8 0 &gic 0 0 GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-					<9 0 &gic 0 0 GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-					<10 0 &gic 0 0 GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
-					<11 0 &gic 0 0 GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+					<0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+					<1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+					<2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+					<3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+					<4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+					<5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+					<6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					<7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+					<8 0 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					<9 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+					<10 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+					<11 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-map-mask = <0xffffffff 0x0>;
 			};
 		};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index 7032505f5ef3..3c611cb4f5fe 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -680,18 +680,18 @@
 				interrupt-controller;
 				reg = <0x14 4>;
 				interrupt-map =
-					<0 0 &gic 0 0 GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
-					<1 0 &gic 0 0 GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
-					<2 0 &gic 0 0 GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-					<3 0 &gic 0 0 GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
-					<4 0 &gic 0 0 GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
-					<5 0 &gic 0 0 GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
-					<6 0 &gic 0 0 GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
-					<7 0 &gic 0 0 GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
-					<8 0 &gic 0 0 GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-					<9 0 &gic 0 0 GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-					<10 0 &gic 0 0 GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
-					<11 0 &gic 0 0 GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+					<0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+					<1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+					<2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+					<3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+					<4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+					<5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+					<6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					<7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+					<8 0 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					<9 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+					<10 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+					<11 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-map-mask = <0xffffffff 0x0>;
 			};
 		};
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
index ee4e585a9c39..6446e6df7a9a 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
@@ -141,6 +141,22 @@ lsio_subsys: bus@5d000000 {
 		status = "disabled";
 	};
 
+	lsio_mu5: mailbox@5d200000 {
+		reg = <0x5d200000 0x10000>;
+		interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <2>;
+		power-domains = <&pd IMX_SC_R_MU_5A>;
+		status = "disabled";
+	};
+
+	lsio_mu6: mailbox@5d210000 {
+		reg = <0x5d210000 0x10000>;
+		interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <2>;
+		power-domains = <&pd IMX_SC_R_MU_6A>;
+		status = "disabled";
+	};
+
 	lsio_mu13: mailbox@5d280000 {
 		reg = <0x5d280000 0x10000>;
 		interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
index 0da311898e01..ec3f2c177035 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
@@ -3,6 +3,8 @@
  * Copyright 2020 Compass Electronics Group, LLC
  */
 
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
 / {
 	leds {
 		compatible = "gpio-leds";
@@ -34,6 +36,19 @@
 		};
 	};
 
+	pcie0_refclk: pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	pcie0_refclk_gated:  pcie0-refclk-gated {
+		compatible = "gpio-gate-clock";
+		clocks = <&pcie0_refclk>;
+		#clock-cells = <0>;
+		enable-gpios = <&pca6416_1 2 GPIO_ACTIVE_LOW>;
+	};
+
 	reg_audio: regulator-audio {
 		compatible = "regulator-fixed";
 		regulator-name = "3v3_aud";
@@ -64,6 +79,16 @@
 		startup-delay-us = <100000>;
 	};
 
+	reg_pcie0: regulator-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "pci_pwr_en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pca6416_1 1 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <100000>;
+	};
+
 	reg_usdhc2_vmmc: regulator-usdhc2 {
 		compatible = "regulator-fixed";
 		regulator-name = "VSD_3V3";
@@ -202,6 +227,32 @@
 	};
 };
 
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,tx-deemph-gen1 = <0x2d>;
+	fsl,tx-deemph-gen2 = <0xf>;
+	fsl,clkreq-unsupported;
+	clocks = <&pcie0_refclk_gated>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio4 21 GPIO_ACTIVE_LOW>;
+	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
+		 <&pcie0_refclk_gated>;
+	clock-names = "pcie", "pcie_aux", "pcie_bus";
+	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
+	assigned-clock-rates = <10000000>, <250000000>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+				 <&clk IMX8MM_SYS_PLL2_250M>;
+	vpcie-supply = <&reg_pcie0>;
+	status = "okay";
+};
+
 &sai3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sai3>;
@@ -308,6 +359,12 @@
 		>;
 	};
 
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI2_RXFS_GPIO4_IO21       0x41
+		>;
+	};
+
 	pinctrl_sai3: sai3grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC     0xd6
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dts b/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dts
new file mode 100644
index 000000000000..b2e8967e9687
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+//
+// Copyright (c) 2021 emtrion GmbH
+// Author: Frank Erdrich <frank.erdrich@emtrion.com>
+//
+
+/dts-v1/;
+
+#include "imx8mm-emcon.dtsi"
+#include "imx8mm-emcon-avari.dtsi"
+
+/ {
+	model = "emtrion SoM emCON-MX8M mini on Avari";
+	compatible = "emtrion,emcon-mx8mm-avari", "fsl,imx8mm";
+};
+
+&lvds_backlight {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dtsi
new file mode 100644
index 000000000000..5028f232b6bd
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-emcon-avari.dtsi
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+//
+// Copyright (C) 2021 emtrion GmbH
+// Author: Frank Erdrich <frank.erdrich@emtrion.com>
+//
+
+/ {
+	aliases {
+		boardid = &boardID;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	reg_wall_5p0: regulator-wall5p0 {
+		compatible = "regulator-fixed";
+		regulator-name = "Main-Supply";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_base3p3: regulator-base3p3 {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_wall_5p0>;
+		regulator-name = "3V3-avari";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_base1p5: regulator-base1p5 {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_base3p3>;
+		regulator-name = "1V5-avari";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_usb_otg: regulator-otgvbus {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_wall_5p0>;
+		regulator-name = "OTG_VBUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 8 GPIO_ACTIVE_LOW>;
+		regulator-always-on;
+	};
+
+	clk_codec: clock-codec {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12000000>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "SGTL5000-Card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,frame-master = <&codec_dai>;
+		simple-audio-card,widgets = "Headphone", "Headphone Jack";
+		simple-audio-card,routing = "Headphone Jack", "HP_OUT";
+
+		cpu_dai: simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+
+		codec_dai: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
+	};
+};
+
+&ecspi1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	sgtl5000: audio-codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clk_codec>;
+		VDDA-supply = <&reg_base3p3>;
+		VDDIO-supply = <&reg_base3p3>;
+	};
+
+	boardID: gpio@3a {
+		compatible = "nxp,pca8574";
+		reg = <0x3a>;
+		gpio-controller;
+		#gpio-cells = <1>;
+	};
+};
+
+&sai2 {
+	status = "okay";
+};
+
+&uart2 {
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&usbotg1 {
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	status = "disabled";
+};
+
+&usdhc2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi
new file mode 100644
index 000000000000..7c4af71baab9
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi
@@ -0,0 +1,627 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+//
+// Copyright 2018 NXP
+// Copyright (C) 2021 emtrion GmbH
+//
+
+/dts-v1/;
+
+#include "imx8mm.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	som_leds: leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led>;
+
+		green {
+			label = "som:green";
+			gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		red {
+			label = "som:red";
+			gpios = <&gpio5 10 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	lvds_backlight: lvds-backlight {
+		compatible = "pwm-backlight";
+		enable-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+		pwms = <&pwm1 0 50000 0>;
+		brightness-levels = <
+			0 4 8 16 32 64 80 96 112
+			128 144 160 176 250
+		>;
+		default-brightness-level = <9>;
+		status = "disabled";
+	};
+
+	reg_usdhc1_vmmc: regulator-emmc {
+		compatible = "regulator-fixed";
+		regulator-name = "eMMC";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		regulator-name = "sdcard_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>,
+				<&gpio5 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+		};
+	};
+};
+
+&flexspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi0>;
+	pinctrl-1 = <&pinctrl_flexspi1>;
+	status = "okay";
+
+	flash0: spi-flash@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+
+	pinctrl_csi_pwn: csi-pwn-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x19
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK		0x82
+			MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI		0x82
+			MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO		0x82
+		>;
+	};
+
+	pinctrl_ecspi1_cs: ecspi1-cs {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x40000
+			MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13		0x40000
+		>;
+	};
+
+	pinctrl_fec1: fec1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC				0x3
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO			0x3
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9			0x19
+		>;
+	};
+
+	pinctrl_flexspi0: flexspi0-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK		0x1c2
+			MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B	0x82
+			MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0	0x82
+			MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1	0x82
+			MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2	0x82
+			MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3	0x82
+			MX8MM_IOMUXC_NAND_DQS_QSPI_A_DQS		0x82
+		>;
+	};
+
+	pinctrl_flexspi1: flexspi1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_CLE_QSPI_B_SCLK		0x1c2
+			MX8MM_IOMUXC_NAND_CE2_B_QSPI_B_SS0_B	0x82
+			MX8MM_IOMUXC_NAND_DATA04_QSPI_B_DATA0	0x82
+			MX8MM_IOMUXC_NAND_DATA05_QSPI_B_DATA1	0x82
+			MX8MM_IOMUXC_NAND_DATA06_QSPI_B_DATA2	0x82
+			MX8MM_IOMUXC_NAND_DATA07_QSPI_B_DATA3	0x82
+		>;
+	};
+
+	pinctrl_gpio_led: gpio-led-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI2_SCLK_GPIO5_IO10		0x19
+			MX8MM_IOMUXC_NAND_CE3_B_GPIO3_IO4		0x19
+		>;
+	};
+
+	pinctrl_i2c1: i2c1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL			0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA			0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL			0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA			0x400001c3
+		>;
+	};
+
+	pinctrl_lvds: lvds-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25		0x06
+		>;
+	};
+
+	pinctrl_pcie0: pcie0-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20		0x41
+			MX8MM_IOMUXC_SAI5_RXFS_GPIO3_IO19		0x41
+		>;
+	};
+
+	pinctrl_pmic: pmic-irq {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2		0x41
+		>;
+	};
+
+	pinctrl_pwm1: pwm1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO01_PWM1_OUT		0x06
+		>;
+	};
+
+	pinctrl_sai2: sai2-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI2_MCLK_SAI2_MCLK		0xd6
+			MX8MM_IOMUXC_SAI2_RXC_SAI2_RX_BCLK		0xd6
+			MX8MM_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0	0xd6
+			MX8MM_IOMUXC_SAI2_RXFS_SAI2_RX_SYNC		0xd6
+			MX8MM_IOMUXC_SAI2_TXC_SAI2_TX_BCLK		0xd6
+			MX8MM_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0	0xd6
+			MX8MM_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC		0xd6
+		>;
+	};
+
+	pinctrl_spdif1: spdif1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_TX_SPDIF1_OUT		0xd6
+			MX8MM_IOMUXC_SPDIF_RX_SPDIF1_IN			0xd6
+		>;
+	};
+
+	pinctrl_uart1: uart1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX		0x140
+			MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX		0x140
+		>;
+	};
+
+	pinctrl_uart2: uart2-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX		0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX		0x140
+
+			/* rts and cts */
+			MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B	0x140
+			MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B	0x140
+		>;
+	};
+
+	pinctrl_uart3: uart3-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX		0x140
+			MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX		0x140
+		>;
+	};
+
+	pinctrl_uart4: uart4-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX		0x140
+			MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX		0x140
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK			0x190
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD			0x1d0
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d0
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d0
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d0
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d0
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x1d0
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x1d0
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x1d0
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x1d0
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK			0x194
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD			0x1d4
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d4
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d4
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d4
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d4
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x1d4
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x1d4
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x1d4
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x1d4
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK			0x196
+			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD			0x1d6
+			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d6
+			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d6
+			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d6
+			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d6
+			MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x1d6
+			MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x1d6
+			MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x1d6
+			MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x1d6
+		>;
+	};
+
+	pinctrl_usdhc1_gpio: usdhc1-gpio-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B	0x41
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x1c4
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d0
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d6
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
+		>;
+	};
+
+	/* no reset for sdhc2 interface */
+	pinctrl_usdhc2_gpio: usdhc2-gpio-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x1c4
+			MX8MM_IOMUXC_SD2_WP_USDHC2_WP			0x1c4
+		>;
+	};
+
+	pinctrl_wdog: wdog-grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0xc6
+		>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	bd71847: pmic@4b {
+		compatible = "rohm,bd71847";
+		reg = <0x4b>;
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		rohm,reset-snvs-powered;
+
+		regulators {
+			buck1_reg: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-idle-voltage = <900000>;
+			};
+
+			buck3_reg: BUCK3 {
+				// BUCK5 in datasheet
+				regulator-name = "BUCK3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck4_reg: BUCK4 {
+				// BUCK6 in datasheet
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5_reg: BUCK5 {
+				// BUCK7 in datasheet
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6_reg: BUCK6 {
+				// BUCK8 in datasheet
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "LDO6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	rv1805: rtc@69 {
+		compatible = "abracon,ab1805";
+		reg = <0x69>;
+	};
+};
+
+&mu {
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+};
+
+&sai2 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+	assigned-clocks = <&clk IMX8MM_CLK_SAI2>;
+	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <12000000>;
+	status = "disabled";
+};
+
+&spdif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif1>;
+	assigned-clocks = <&clk IMX8MM_CLK_SPDIF1>;
+	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	clocks = <&clk IMX8MM_CLK_AUDIO_AHB>, <&clk IMX8MM_CLK_24M>,
+		<&clk IMX8MM_CLK_SPDIF1>, <&clk IMX8MM_CLK_DUMMY>,
+		<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>,
+		<&clk IMX8MM_CLK_AUDIO_AHB>, <&clk IMX8MM_CLK_DUMMY>,
+		<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>,
+		<&clk IMX8MM_AUDIO_PLL1_OUT>, <&clk IMX8MM_AUDIO_PLL2_OUT>;
+	clock-names = "core", "rxtx0", "rxtx1", "rxtx2", "rxtx3",
+		"rxtx4", "rxtx5", "rxtx6", "rxtx7", "spba", "pll8k", "pll11k";
+	status = "disabled";
+};
+
+&uart1 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clk IMX8MM_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	assigned-clocks = <&clk IMX8MM_CLK_UART2>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	assigned-clocks = <&clk IMX8MM_CLK_UART3>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	assigned-clocks = <&clk IMX8MM_CLK_UART4>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	over-current-active-low;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "disabled";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>;
+	bus-width = <8>;
+	vmmc-supply = <&reg_usdhc1_vmmc>;
+	keep-power-in-suspend;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
index 3bac87b7e142..6d67df7692f1 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
@@ -5,6 +5,7 @@
 
 /dts-v1/;
 
+#include <dt-bindings/phy/phy-imx8-pcie.h>
 #include <dt-bindings/usb/pd.h>
 #include "imx8mm.dtsi"
 
@@ -30,6 +31,23 @@
 		};
 	};
 
+	pcie0_refclk: pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	reg_pcie0: regulator-pcie {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcie0_reg>;
+		regulator-name = "MPCIE_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	reg_usdhc2_vmmc: regulator-usdhc2 {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -296,6 +314,30 @@
 	};
 };
 
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,tx-deemph-gen1 = <0x2d>;
+	fsl,tx-deemph-gen2 = <0xf>;
+	clocks = <&pcie0_refclk>;
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio4 21 GPIO_ACTIVE_LOW>;
+	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
+		 <&pcie0_refclk>;
+	clock-names = "pcie", "pcie_aux", "pcie_bus";
+	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
+	assigned-clock-rates = <10000000>, <250000000>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+				 <&clk IMX8MM_SYS_PLL2_250M>;
+	vpcie-supply = <&reg_pcie0>;
+	status = "okay";
+};
+
 &sai3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sai3>;
@@ -413,6 +455,19 @@
 		>;
 	};
 
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B    0x61
+			MX8MM_IOMUXC_SAI2_RXFS_GPIO4_IO21       0x41
+		>;
+	};
+
+	pinctrl_pcie0_reg: pcie0reggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5       0x41
+		>;
+	};
+
 	pinctrl_pmic: pmicirqgrp {
 		fsl,pins = <
 			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x141
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h b/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h
index a003e6af3353..83c8f715cd90 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h
+++ b/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h
@@ -248,6 +248,7 @@
 #define MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15                                   0x130 0x398 0x000 0x5 0x0
 #define MX8MM_IOMUXC_NAND_RE_B_SIM_M_HADDR11                                0x130 0x398 0x000 0x7 0x0
 #define MX8MM_IOMUXC_NAND_READY_B_RAWNAND_READY_B                           0x134 0x39C 0x000 0x0 0x0
+#define MX8MM_IOMUXC_NAND_READY_B_SD3_RESET_B                               0x134 0x39C 0x000 0x2 0x0
 #define MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16                                0x134 0x39C 0x000 0x5 0x0
 #define MX8MM_IOMUXC_NAND_READY_B_SIM_M_HADDR12                             0x134 0x39C 0x000 0x7 0x0
 #define MX8MM_IOMUXC_NAND_WE_B_RAWNAND_WE_B                                 0x138 0x3A0 0x000 0x0 0x0
@@ -279,7 +280,7 @@
 #define MX8MM_IOMUXC_SAI5_RXD2_SAI1_TX_DATA4                                0x150 0x3B8 0x000 0x1 0x0
 #define MX8MM_IOMUXC_SAI5_RXD2_SAI1_TX_SYNC                                 0x150 0x3B8 0x4CC 0x2 0x1
 #define MX8MM_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK                                 0x150 0x3B8 0x4E8 0x3 0x0
-#define MX8MM_IOMUXC_SAI5_RXD2_PDM_DATA2                                    0x150 0x3B8 0x53c 0x4 0x0
+#define MX8MM_IOMUXC_SAI5_RXD2_PDM_DATA2                                    0x150 0x3B8 0x53C 0x4 0x0
 #define MX8MM_IOMUXC_SAI5_RXD2_GPIO3_IO23                                   0x150 0x3B8 0x000 0x5 0x0
 #define MX8MM_IOMUXC_SAI5_RXD3_SAI5_RX_DATA3                                0x154 0x3BC 0x4E0 0x0 0x0
 #define MX8MM_IOMUXC_SAI5_RXD3_SAI1_TX_DATA5                                0x154 0x3BC 0x000 0x1 0x0
@@ -486,7 +487,7 @@
 #define MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC                                 0x1D8 0x440 0x000 0x0 0x0
 #define MX8MM_IOMUXC_SAI3_TXFS_GPT1_CAPTURE2                                0x1D8 0x440 0x000 0x1 0x0
 #define MX8MM_IOMUXC_SAI3_TXFS_SAI5_RX_DATA1                                0x1D8 0x440 0x4D8 0x2 0x2
-#define MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX                                 0x1D8 0x440 0x4Fc 0x4 0x2
+#define MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX                                 0x1D8 0x440 0x4FC 0x4 0x2
 #define MX8MM_IOMUXC_SAI3_TXFS_UART2_DTE_TX                                 0x1D8 0x440 0x000 0x4 0x0
 #define MX8MM_IOMUXC_SAI3_TXFS_GPIO4_IO31                                   0x1D8 0x440 0x000 0x5 0x0
 #define MX8MM_IOMUXC_SAI3_TXFS_TPSMP_HDATA1                                 0x1D8 0x440 0x000 0x7 0x0
@@ -494,7 +495,7 @@
 #define MX8MM_IOMUXC_SAI3_TXC_GPT1_COMPARE2                                 0x1DC 0x444 0x000 0x1 0x0
 #define MX8MM_IOMUXC_SAI3_TXC_SAI5_RX_DATA2                                 0x1DC 0x444 0x4DC 0x2 0x2
 #define MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX                                  0x1DC 0x444 0x000 0x4 0x0
-#define MX8MM_IOMUXC_SAI3_TXC_UART2_DTE_RX                                  0x1DC 0x444 0x4Fc 0x4 0x3
+#define MX8MM_IOMUXC_SAI3_TXC_UART2_DTE_RX                                  0x1DC 0x444 0x4FC 0x4 0x3
 #define MX8MM_IOMUXC_SAI3_TXC_GPIO5_IO0                                     0x1DC 0x444 0x000 0x5 0x0
 #define MX8MM_IOMUXC_SAI3_TXC_TPSMP_HDATA2                                  0x1DC 0x444 0x000 0x7 0x0
 #define MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0                                 0x1E0 0x448 0x000 0x0 0x0
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-prt8mm.dts b/arch/arm64/boot/dts/freescale/imx8mm-prt8mm.dts
new file mode 100644
index 000000000000..9fbbbb556c0b
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-prt8mm.dts
@@ -0,0 +1,304 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2020 Protonic Holland
+ * Copyright 2019 NXP
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/usb/pd.h>
+#include "imx8mm.dtsi"
+
+/ {
+	model = "Protonic PRT8MM";
+	compatible = "prt,prt8mm", "fsl,imx8mm";
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x40000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		debug-led0 {
+			label = "DEBUG_LED0";
+			gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		debug-led1 {
+			label = "DEBUG_LED1";
+			gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "cpu";
+		};
+	};
+
+	sound-ssm2518 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "ssm2518-audio";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&cpudai>;
+		simple-audio-card,bitclock-master = <&cpudai>;
+
+		cpudai: simple-audio-card,cpu {
+			sound-dai = <&sai3>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&ssm2518>;
+			clocks = <&clk IMX8MM_CLK_SAI3_ROOT>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	ssm2518: audio-codec@34 {
+		compatible = "adi,ssm2518";
+		reg = <0x34>;
+		#sound-dai-cells = <0>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	regulator@60 {
+		compatible = "fcs,fan53555";
+		reg = <0x60>;
+		regulator-name = "0V9_CORE";
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <980000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf85363";
+		reg = <0x51>;
+	};
+
+	touchscreeen@5d {
+		compatible = "goodix,gt911";
+		reg = <0x5d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touchscreen>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_NONE>;
+		irq-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+	};
+
+	temp-sense@70 {
+		compatible = "ti,tmp103";
+		reg = <0x70>;
+	};
+};
+
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <12288000>;
+	fsl,sai-mclk-direction-output;
+	fsl,sai-asynchronous;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	dr_mode = "host";
+	disable-over-current;
+	power-active-high;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	assigned-clocks = <&clk IMX8MM_CLK_USDHC2>;
+	assigned-clock-rates = <100000000>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	non-removable;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_gpio_leds: ledsgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_ALE_GPIO3_IO0			0x00
+			MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1		0x00
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x400000c3
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x400000c3
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL			0x400000c3
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA			0x400000c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL			0x400000c3
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA			0x400000c3
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC		0xd6
+			MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK		0xd6
+			MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK		0xd6
+			MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0		0xd6
+		>;
+	};
+
+	pinctrl_touchscreen: tsgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8		0x80
+			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x80
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX		0x040
+			MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX		0x040
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO12_USB1_OTG_PWR		0x000
+			MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC		0x000
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK			0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD			0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d0
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x0d4
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x190
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d0
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d0
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d0
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d0
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d0
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d0
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d0
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d0
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d0
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x194
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d4
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d4
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d4
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d4
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d4
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d4
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d4
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d4
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d4
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x196
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d6
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d6
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d6
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d6
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d6
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d6
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d6
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d6
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d6
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE		0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts
index 7844878788f4..286d2df01cfa 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts
@@ -5,6 +5,7 @@
 
 /dts-v1/;
 
+#include <dt-bindings/phy/phy-imx8-pcie.h>
 #include "imx8mm-tqma8mqml.dtsi"
 #include "mba8mx.dtsi"
 
@@ -58,6 +59,24 @@
 	};
 };
 
+&pcie_phy {
+	clocks = <&pcie0_refclk>;
+	status = "okay";
+};
+
+&pcie0 {
+	reset-gpio = <&expander0 14 GPIO_ACTIVE_LOW>;
+	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
+		<&pcie0_refclk>;
+	clock-names = "pcie", "pcie_aux", "pcie_bus";
+	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+				<&clk IMX8MM_CLK_PCIE1_CTRL>;
+	assigned-clock-rates = <10000000>, <250000000>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+				<&clk IMX8MM_SYS_PLL2_250M>;
+	status = "okay";
+};
+
 &sai3 {
 	assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
 	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi
index 284e62acc0b4..16ee9b5179e6 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi
@@ -227,6 +227,11 @@
 	};
 };
 
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,clkreq-unsupported;
+};
+
 &usdhc3 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc3>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi
index 28012279f6f6..73addc0b8e57 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi
@@ -5,6 +5,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
 
 / {
 	aliases {
@@ -33,6 +34,12 @@
 		};
 	};
 
+	pcie0_refclk: pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
 	pps {
 		compatible = "pps-gpio";
 		pinctrl-names = "default";
@@ -61,6 +68,20 @@
 	status = "okay";
 };
 
+&gpio1 {
+	gpio-line-names = "", "", "", "", "", "", "pci_usb_sel", "dio0",
+		"", "dio1", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names = "", "", "", "dio2", "dio3", "", "", "pci_wdis#",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
 &i2c2 {
 	clock-frequency = <400000>;
 	pinctrl-names = "default";
@@ -87,6 +108,28 @@
 	status = "okay";
 };
 
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,clkreq-unsupported;
+	clocks = <&pcie0_refclk>;
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio4 6 GPIO_ACTIVE_LOW>;
+	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
+		 <&pcie0_refclk>;
+	clock-names = "pcie", "pcie_aux", "pcie_bus";
+	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
+	assigned-clock-rates = <10000000>, <250000000>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+				 <&clk IMX8MM_SYS_PLL2_250M>;
+	status = "okay";
+};
+
 /* GPS */
 &uart1 {
 	pinctrl-names = "default";
@@ -148,6 +191,12 @@
 		>;
 	};
 
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6	0x41
+		>;
+	};
+
 	pinctrl_pps: ppsgrp {
 		fsl,pins = <
 			MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x41
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-imx219.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-imx219.dts
new file mode 100644
index 000000000000..4eaf8aabcbff
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-imx219.dts
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx8mm-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	compatible = "gw,imx8mm-gw72xx-0x", "fsl,imx8mm";
+
+	reg_cam: regulator-cam {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_cam>;
+		compatible = "regulator-fixed";
+		regulator-name = "reg_cam";
+		gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	cam24m: cam24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "cam24m";
+	};
+};
+
+&csi {
+	status = "okay";
+};
+
+&i2c3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	imx219: sensor@10 {
+		compatible = "sony,imx219";
+		reg = <0x10>;
+		clocks = <&cam24m>;
+		VDIG-supply = <&reg_cam>;
+
+		port {
+			/* MIPI CSI-2 bus endpoint */
+			imx219_to_mipi_csi2: endpoint {
+				remote-endpoint = <&imx8mm_mipi_csi_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+				link-frequencies = /bits/ 64 <456000000>;
+			};
+		};
+	};
+};
+
+&mipi_csi {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			imx8mm_mipi_csi_in: endpoint {
+				remote-endpoint = <&imx219_to_mipi_csi2>;
+				data-lanes = <1 2>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			imx8mm_mipi_csi_out: endpoint {
+				remote-endpoint = <&csi_in>;
+			};
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_reg_cam: regcamgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1	0x41
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dts
new file mode 100644
index 000000000000..3ea73a6886ff
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs232-rts.dts
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Gateworks Corporation
+ *
+ * GW72xx RS232 with RTS/CTS hardware flow control:
+ *  - GPIO4_0 rs485_en needs to be driven low (in-active)
+ *  - UART4_TX becomes RTS
+ *  - UART4_RX becomes CTS
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx8mm-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	compatible = "gw,imx8mm-gw72xx-0x";
+};
+
+&gpio4 {
+	rs485_en {
+		gpio-hog;
+		gpios = <0 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "rs485_en";
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	rts-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>;
+	cts-gpios = <&gpio5 28 GPIO_ACTIVE_LOW>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX     0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX     0x140
+			MX8MM_IOMUXC_UART4_TXD_GPIO5_IO29	0x140
+			MX8MM_IOMUXC_UART4_RXD_GPIO5_IO28	0x140
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs422.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs422.dts
new file mode 100644
index 000000000000..c3cd9f2b0db3
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs422.dts
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Gateworks Corporation
+ *
+ * GW72xx RS422 (RS485 full duplex):
+ *  - GPIO1_0 rs485_term selects on-chip termination
+ *  - GPIO4_0 rs485_en needs to be driven high (active)
+ *  - GPIO4_2 rs485_hd needs to be driven low (in-active)
+ *  - UART4_TX is DE for RS485 transmitter
+ *  - RS485_EN needs to be pulled high
+ *  - RS485_HALF needs to be low
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx8mm-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	compatible = "gw,imx8mm-gw72xx-0x";
+};
+
+&gpio4 {
+	rs485_en {
+		gpio-hog;
+		gpios = <0 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "rs485_en";
+	};
+
+	rs485_hd {
+		gpio-hog;
+		gpios = <2 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "rs485_hd";
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	rts-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
+
+&uart4 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX     0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX     0x140
+			MX8MM_IOMUXC_UART4_TXD_GPIO5_IO29	0x140
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs485.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs485.dts
new file mode 100644
index 000000000000..cc0a287226ab
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rs485.dts
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Gateworks Corporation
+ *
+ * GW72xx RS485 HD:
+ *  - GPIO1_0 rs485_term selects on-chip termination
+ *  - GPIO4_0 rs485_en needs to be driven high (active)
+ *  - GPIO4_2 rs485_hd needs to be driven high (active)
+ *  - UART4_TX is DE for RS485 transmitter
+ *  - RS485_EN needs to be pulled high
+ *  - RS485_HALF needs to be pulled high
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx8mm-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	compatible = "gw,imx8mm-gw72xx-0x";
+};
+
+&gpio4 {
+	rs485_en {
+		gpio-hog;
+		gpios = <0 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "rs485_en";
+	};
+
+	rs485_hd {
+		gpio-hog;
+		gpios = <2 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "rs485_hd";
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	rts-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
+
+&uart4 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX     0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX     0x140
+			MX8MM_IOMUXC_UART4_TXD_GPIO5_IO29	0x140
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
index 27afa46a253a..1e7badb2a82e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
@@ -5,9 +5,11 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
 
 / {
 	aliases {
+		ethernet1 = &eth1;
 		usb0 = &usbotg1;
 		usb1 = &usbotg2;
 	};
@@ -33,6 +35,12 @@
 		};
 	};
 
+	pcie0_refclk: pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
 	pps {
 		compatible = "pps-gpio";
 		pinctrl-names = "default";
@@ -80,6 +88,22 @@
 	status = "okay";
 };
 
+&gpio1 {
+	gpio-line-names = "rs485_term", "mipi_gpio4", "", "",
+		"", "", "pci_usb_sel", "dio0",
+		"", "dio1", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names = "rs485_en", "mipi_gpio3", "rs485_hd", "mipi_gpio2",
+		"mipi_gpio1", "", "", "pci_wdis#",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
 &i2c2 {
 	clock-frequency = <400000>;
 	pinctrl-names = "default";
@@ -106,6 +130,54 @@
 	status = "okay";
 };
 
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,clkreq-unsupported;
+	clocks = <&pcie0_refclk>;
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio4 6 GPIO_ACTIVE_LOW>;
+	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
+		 <&pcie0_refclk>;
+	clock-names = "pcie", "pcie_aux", "pcie_bus";
+	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
+	assigned-clock-rates = <10000000>, <250000000>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+				 <&clk IMX8MM_SYS_PLL2_250M>;
+	status = "okay";
+
+	pcie@0,0 {
+		reg = <0x0000 0 0 0 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pcie@1,0 {
+			reg = <0x0000 0 0 0 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pcie@2,3 {
+				reg = <0x1800 0 0 0 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eth1: pcie@5,0 {
+					reg = <0x0000 0 0 0 0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					local-mac-address = [00 00 00 00 00 00];
+				};
+			};
+		};
+	};
+};
+
 /* off-board header */
 &sai3 {
 	pinctrl-names = "default";
@@ -198,6 +270,12 @@
 		>;
 	};
 
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6	0x41
+		>;
+	};
+
 	pinctrl_pps: ppsgrp {
 		fsl,pins = <
 			MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x41
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-imx219.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-imx219.dts
new file mode 100644
index 000000000000..f3ece4b7fbbd
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-imx219.dts
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx8mm-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	compatible = "gw,imx8mm-gw73xx-0x", "fsl,imx8mm";
+
+	reg_cam: regulator-cam {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_cam>;
+		compatible = "regulator-fixed";
+		regulator-name = "reg_cam";
+		gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	cam24m: cam24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "cam24m";
+	};
+};
+
+&csi {
+	status = "okay";
+};
+
+&i2c3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	imx219: sensor@10 {
+		compatible = "sony,imx219";
+		reg = <0x10>;
+		clocks = <&cam24m>;
+		VDIG-supply = <&reg_cam>;
+
+		port {
+			/* MIPI CSI-2 bus endpoint */
+			imx219_to_mipi_csi2: endpoint {
+				remote-endpoint = <&imx8mm_mipi_csi_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+				link-frequencies = /bits/ 64 <456000000>;
+			};
+		};
+	};
+};
+
+&mipi_csi {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			imx8mm_mipi_csi_in: endpoint {
+				remote-endpoint = <&imx219_to_mipi_csi2>;
+				data-lanes = <1 2>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			imx8mm_mipi_csi_out: endpoint {
+				remote-endpoint = <&csi_in>;
+			};
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_reg_cam: regcamgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1	0x41
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dts
new file mode 100644
index 000000000000..2fa635e1c1a8
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs232-rts.dts
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Gateworks Corporation
+ *
+ * GW73xx RS232 with RTS/CTS hardware flow control:
+ *  - GPIO4_0 rs485_en needs to be driven low (in-active)
+ *  - UART4_TX becomes RTS
+ *  - UART4_RX becomes CTS
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx8mm-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	compatible = "gw,imx8mm-gw73xx-0x";
+};
+
+&gpio4 {
+	rs485_en {
+		gpio-hog;
+		gpios = <0 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "rs485_en";
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	rts-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>;
+	cts-gpios = <&gpio5 28 GPIO_ACTIVE_LOW>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX     0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX     0x140
+			MX8MM_IOMUXC_UART4_TXD_GPIO5_IO29	0x140
+			MX8MM_IOMUXC_UART4_RXD_GPIO5_IO28	0x140
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs422.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs422.dts
new file mode 100644
index 000000000000..3e6404340d52
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs422.dts
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 Gateworks Corporation
+ *
+ * GW73xx RS422 (RS485 full duplex):
+ *  - GPIO1_0 rs485_term selects on-chip termination
+ *  - GPIO4_0 rs485_en needs to be driven high (active)
+ *  - GPIO4_2 rs485_hd needs to be driven low (in-active)
+ *  - UART4_TX is DE for RS485 transmitter
+ *  - RS485_EN needs to be pulled high
+ *  - RS485_HALF needs to be low
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx8mm-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	compatible = "gw,imx8mm-gw73xx-0x";
+};
+
+&gpio4 {
+	rs485_en {
+		gpio-hog;
+		gpios = <0 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "rs485_en";
+	};
+
+	rs485_hd {
+		gpio-hog;
+		gpios = <2 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "rs485_hd";
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	rts-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
+
+&uart4 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX     0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX     0x140
+			MX8MM_IOMUXC_UART4_TXD_GPIO5_IO29	0x140
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs485.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs485.dts
new file mode 100644
index 000000000000..2c71ab9854cb
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rs485.dts
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 Gateworks Corporation
+ *
+ * GW73xx RS485 HD:
+ *  - GPIO1_0 rs485_term selects on-chip termination
+ *  - GPIO4_0 rs485_en needs to be driven high (active)
+ *  - GPIO4_2 rs485_hd needs to be driven high (active)
+ *  - UART4_TX is DE for RS485 transmitter
+ *  - RS485_EN needs to be pulled high
+ *  - RS485_HALF needs to be pulled high
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx8mm-pinfunc.h"
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	compatible = "gw,imx8mm-gw73xx-0x";
+};
+
+&gpio4 {
+	rs485_en {
+		gpio-hog;
+		gpios = <0 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "rs485_en";
+	};
+
+	rs485_hd {
+		gpio-hog;
+		gpios = <2 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "rs485_hd";
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	rts-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
+
+&uart4 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX     0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX     0x140
+			MX8MM_IOMUXC_UART4_TXD_GPIO5_IO29	0x140
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
index a59e849c7be2..426483ec1f88 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
@@ -5,9 +5,11 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
 
 / {
 	aliases {
+		ethernet1 = &eth1;
 		usb0 = &usbotg1;
 		usb1 = &usbotg2;
 	};
@@ -33,6 +35,12 @@
 		};
 	};
 
+	pcie0_refclk: pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
 	pps {
 		compatible = "pps-gpio";
 		pinctrl-names = "default";
@@ -100,6 +108,22 @@
 	status = "okay";
 };
 
+&gpio1 {
+	gpio-line-names = "rs485_term", "mipi_gpio4", "", "",
+		"", "", "pci_usb_sel", "dio0",
+		"", "dio1", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names = "rs485_en", "mipi_gpio3", "rs485_hd", "mipi_gpio2",
+		"mipi_gpio1", "", "", "pci_wdis#",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
 &i2c2 {
 	clock-frequency = <400000>;
 	pinctrl-names = "default";
@@ -126,6 +150,54 @@
 	status = "okay";
 };
 
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,clkreq-unsupported;
+	clocks = <&pcie0_refclk>;
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio4 6 GPIO_ACTIVE_LOW>;
+	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
+		 <&pcie0_refclk>;
+	clock-names = "pcie", "pcie_aux", "pcie_bus";
+	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
+	assigned-clock-rates = <10000000>, <250000000>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+				 <&clk IMX8MM_SYS_PLL2_250M>;
+	status = "okay";
+
+	pcie@0,0 {
+		reg = <0x0000 0 0 0 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pcie@1,0 {
+			reg = <0x0000 0 0 0 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pcie@2,4 {
+				reg = <0x2000 0 0 0 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eth1: pcie@6,0 {
+					reg = <0x0000 0 0 0 0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					local-mac-address = [00 00 00 00 00 00];
+				};
+			};
+		};
+	};
+};
+
 /* off-board header */
 &sai3 {
 	pinctrl-names = "default";
@@ -241,6 +313,12 @@
 		>;
 	};
 
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6	0x41
+		>;
+	};
+
 	pinctrl_pps: ppsgrp {
 		fsl,pins = <
 			MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x41
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
index 21c546c4628d..7e7231046215 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
@@ -8,6 +8,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/linux-event-codes.h>
 #include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
 
 #include "imx8mm.dtsi"
 
@@ -179,6 +180,12 @@
 		};
 	};
 
+	pcie0_refclk: pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
 	reg_3p3v: regulator-3p3v {
 		compatible = "regulator-fixed";
 		regulator-name = "3P3V";
@@ -286,6 +293,29 @@
 	};
 };
 
+&gpio1 {
+	gpio-line-names = "uart1_rs422#", "", "", "uart1_rs485#",
+		"", "uart1_rs232#", "dig1_in", "dig1_out",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names = "", "", "", "",
+		"", "", "uart3_rs232#", "uart3_rs422#",
+		"uart3_rs485#", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "uart4_rs485#", "", "sim1det#", "sim2det#", "";
+};
+
+&gpio5 {
+	gpio-line-names = "", "", "", "dig2_out", "dig2_in", "sim2sel", "", "",
+		"", "", "uart4_rs232#", "", "", "uart4_rs422#", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
 &gpu_2d {
 	status = "disabled";
 };
@@ -644,6 +674,28 @@
 	status = "okay";
 };
 
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,clkreq-unsupported;
+	clocks = <&pcie0_refclk>;
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio5 2 GPIO_ACTIVE_LOW>;
+	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
+		 <&pcie0_refclk>;
+	clock-names = "pcie", "pcie_aux", "pcie_bus";
+	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
+	assigned-clock-rates = <10000000>, <250000000>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+				 <&clk IMX8MM_SYS_PLL2_250M>;
+	status = "okay";
+};
+
 &pgc_gpu {
 	status = "disabled";
 };
@@ -820,6 +872,13 @@
 		>;
 	};
 
+	pinctrl_pcie0: pciegrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI3_TXFS_GPIO4_IO31	0x40000041 /* WDIS# */
+			MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2	0x41
+		>;
+	};
+
 	pinctrl_pmic: pmicgrp {
 		fsl,pins = <
 			MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20	0x41
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
index d52686f4c059..edf0c7aaaef0 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
@@ -9,6 +9,7 @@
 #include <dt-bindings/input/linux-event-codes.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
 
 #include "imx8mm.dtsi"
 
@@ -17,6 +18,7 @@
 	compatible = "gw,imx8mm-gw7902", "fsl,imx8mm";
 
 	aliases {
+		ethernet1 = &eth1;
 		usb0 = &usbotg1;
 		usb1 = &usbotg2;
 	};
@@ -128,6 +130,12 @@
 		};
 	};
 
+	pcie0_refclk: pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
 	pps {
 		compatible = "pps-gpio";
 		pinctrl-names = "default";
@@ -252,6 +260,43 @@
 	};
 };
 
+&gpio1 {
+	gpio-line-names = "", "", "", "", "", "", "", "",
+		"", "", "", "", "", "m2_reset", "", "m2_wdis#",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names = "", "", "", "", "", "", "", "",
+		"uart2_en#", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names = "", "m2_gdis#", "", "", "", "", "", "m2_off#",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names = "", "", "", "", "", "", "", "",
+		"", "", "", "amp_gpio3", "amp_gpio2", "", "amp_gpio1", "",
+		"", "", "", "", "amp_gpio4", "app_gpio1", "", "uart1_rs485",
+		"", "uart1_term", "uart1_half", "app_gpio2",
+		"mipi_gpio1", "", "", "";
+};
+
+&gpio5 {
+	gpio-line-names = "", "", "", "mipi_gpio4",
+		"mipi_gpio3", "mipi_gpio2", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
 &i2c1 {
 	clock-frequency = <100000>;
 	pinctrl-names = "default";
@@ -547,6 +592,42 @@
 	status = "okay";
 };
 
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,clkreq-unsupported;
+	clocks = <&clk IMX8MM_CLK_DUMMY>;
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio4 5 GPIO_ACTIVE_LOW>;
+	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
+		 <&clk IMX8MM_CLK_DUMMY>, <&pcie0_refclk>;
+	clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
+	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
+	assigned-clock-rates = <10000000>, <250000000>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+				 <&clk IMX8MM_SYS_PLL2_250M>;
+	status = "okay";
+
+	pcie@0,0 {
+		reg = <0x0000 0 0 0 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth1: pcie@1,0 {
+			reg = <0x0000 0 0 0 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			local-mac-address = [00 00 00 00 00 00];
+		};
+	};
+};
+
 /* off-board header */
 &sai3 {
 	pinctrl-names = "default";
@@ -647,7 +728,7 @@
 	pinctrl_hog: hoggrp {
 		fsl,pins = <
 			MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1	0x40000159 /* M2_GDIS# */
-			MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13	0x40000041 /* M2_RST# */
+			MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13	0x40000041 /* M2_RESET */
 			MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7	0x40000119 /* M2_OFF# */
 			MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x40000159 /* M2_WDIS# */
 			MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14	0x40000041 /* AMP GPIO1 */
@@ -737,6 +818,12 @@
 		>;
 	};
 
+	pinctrl_pcie0: pciegrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5	0x41
+		>;
+	};
+
 	pinctrl_pmic: pmicgrp {
 		fsl,pins = <
 			MX8MM_IOMUXC_NAND_DATA02_GPIO3_IO8	0x41
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts
new file mode 100644
index 000000000000..1deb2ea8fcc9
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts
@@ -0,0 +1,836 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+#include "imx8mm.dtsi"
+
+/ {
+	model = "Gateworks Venice GW7903 i.MX8MM board";
+	compatible = "gw,imx8mm-gw7903", "fsl,imx8mm";
+
+	aliases {
+		ethernet0 = &fec1;
+		usb0 = &usbotg1;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key_erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	led-controller {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			label = "led01_red";
+			gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led01_grn";
+			gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-2 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			label = "led02_red";
+			gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-3 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led02_grn";
+			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-4 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			label = "led03_red";
+			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-5 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led03_grn";
+			gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-6 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			label = "led04_red";
+			gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-7 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led04_grn";
+			gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-8 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			label = "led05_red";
+			gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-9 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led05_grn";
+			gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-a {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			label = "led06_red";
+			gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-b {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			label = "led06_grn";
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	pcie0_refclk: pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25M {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100M {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-750M {
+			opp-hz = /bits/ 64 <750000000>;
+		};
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	local-mac-address = [00 00 00 00 00 00];
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			rx-internal-delay-ps = <2000>;
+			tx-internal-delay-ps = <2500>;
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names = "", "", "", "", "", "", "", "",
+		"", "", "rs422_en#", "rs485_en#", "rs232_en#", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names = "dig2_in", "dig2_out#", "", "", "", "", "", "",
+		"dig1_out#", "dig1_in", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio5 {
+	gpio-line-names = "", "", "", "", "", "", "", "sim1_det#",
+		"sim2_det#", "sim2_sel", "", "", "pci_wdis#", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		pinctrl-0 = <&pinctrl_gsc>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@6 {
+				gw,mode = <0>;
+				reg = <0x06>;
+				label = "temp";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@82 {
+				gw,mode = <2>;
+				reg = <0x82>;
+				label = "vin";
+				gw,voltage-divider-ohms = <22100 1000>;
+				gw,voltage-offset-microvolt = <700000>;
+			};
+
+			channel@84 {
+				gw,mode = <2>;
+				reg = <0x84>;
+				label = "vdd_5p0";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@86 {
+				gw,mode = <2>;
+				reg = <0x86>;
+				label = "vdd_3p3";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@88 {
+				gw,mode = <2>;
+				reg = <0x88>;
+				label = "vdd_0p9";
+			};
+
+			channel@8c {
+				gw,mode = <2>;
+				reg = <0x8c>;
+				label = "vdd_soc";
+			};
+
+			channel@8e {
+				gw,mode = <2>;
+				reg = <0x8e>;
+				label = "vdd_arm";
+			};
+
+			channel@90 {
+				gw,mode = <2>;
+				reg = <0x90>;
+				label = "vdd_1p8";
+			};
+
+			channel@92 {
+				gw,mode = <2>;
+				reg = <0x92>;
+				label = "vdd_dram";
+			};
+
+			channel@a2 {
+				gw,mode = <2>;
+				reg = <0xa2>;
+				label = "vdd_gsc";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+		};
+	};
+
+	gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic@4b {
+		compatible = "rohm,bd71847";
+		reg = <0x4b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		rohm,reset-snvs-powered;
+		#clock-cells = <0>;
+		clocks = <&osc_32k 0>;
+		clock-output-names = "clk-32k-out";
+
+		regulators {
+			/* vdd_soc: 0.805-0.900V (typ=0.8V) */
+			BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+			};
+
+			/* vdd_arm: 0.805-1.0V (typ=0.9V) */
+			buck2: BUCK2 {
+				regulator-name = "buck2";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <1250>;
+				rohm,dvs-run-voltage = <1000000>;
+				rohm,dvs-idle-voltage = <900000>;
+			};
+
+			/* vdd_0p9: 0.805-1.0V (typ=0.9V) */
+			BUCK3 {
+				regulator-name = "buck3";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_3p3 */
+			BUCK4 {
+				regulator-name = "buck4";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_1p8 */
+			BUCK5 {
+				regulator-name = "buck5";
+				regulator-min-microvolt = <1605000>;
+				regulator-max-microvolt = <1995000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_dram */
+			BUCK6 {
+				regulator-name = "buck6";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* nvcc_snvs_1p8 */
+			LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <1900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdd_snvs_0p8 */
+			LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* vdda_1p8 */
+			LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			LDO6 {
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	accelerometer@19 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accel>;
+		compatible = "st,lis2de12";
+		reg = <0x19>;
+		st,drdy-int-pin = <1>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "INT1";
+	};
+};
+
+&pcie_phy {
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	fsl,clkreq-unsupported;
+	clocks = <&pcie0_refclk>;
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	reset-gpio = <&gpio5 11 GPIO_ACTIVE_LOW>;
+	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
+		 <&pcie0_refclk>;
+	clock-names = "pcie", "pcie_aux", "pcie_bus";
+	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
+	assigned-clock-rates = <10000000>, <250000000>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+				 <&clk IMX8MM_SYS_PLL2_250M>;
+	status = "okay";
+};
+
+&pgc_mipi {
+	status = "disabled";
+};
+
+/* off-board RS232/RS485/RS422 */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	cts-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+	rts-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+	dtr-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	dsr-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	dcd-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+/* console */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+/* microSD */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10	0x40000041 /* RS422# */
+			MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11	0x40000041 /* RS485# */
+			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x40000041 /* RS232# */
+			MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9	0x40000041 /* DIG1_IN */
+			MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8	0x40000041 /* DIG1_OUT */
+			MX8MM_IOMUXC_SD1_CLK_GPIO2_IO0		0x40000041 /* DIG2_IN */
+			MX8MM_IOMUXC_SD1_CMD_GPIO2_IO1		0x40000041 /* DIG2_OUT */
+			MX8MM_IOMUXC_ECSPI1_MOSI_GPIO5_IO7	0x40000041 /* SIM1DET# */
+			MX8MM_IOMUXC_ECSPI1_MISO_GPIO5_IO8	0x40000041 /* SIM2DET# */
+			MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9	0x40000041 /* SIM2SEL */
+			MX8MM_IOMUXC_ECSPI2_MISO_GPIO5_IO12	0x40000041 /* PCI_WDIS# */
+		>;
+	};
+
+	pinctrl_accel: accelgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x159
+		>;
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ENET_MDC_ENET1_MDC			0x3
+			MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f
+			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f
+			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f
+			MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
+			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
+			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
+			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
+			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
+			MX8MM_IOMUXC_SAI2_TXFS_GPIO4_IO24		0x19 /* IRQ# */
+			MX8MM_IOMUXC_SAI2_TXC_GPIO4_IO25		0x19 /* RST# */
+		>;
+	};
+
+	pinctrl_gsc: gscgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI2_TXD0_GPIO4_IO26	0x159
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x400001c3
+			MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5	0x19
+			MX8MM_IOMUXC_SAI3_RXD_GPIO4_IO30	0x19
+			MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2	0x19
+			MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14	0x19
+			MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9	0x19
+			MX8MM_IOMUXC_SPDIF_TX_GPIO5_IO3		0x19
+			MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29	0x19
+			MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28	0x19
+			MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13	0x19
+			MX8MM_IOMUXC_SAI3_TXFS_GPIO4_IO31	0x19
+			MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4		0x19
+			MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8	0x19
+		>;
+	};
+
+	pinctrl_pcie0: pciegrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_ECSPI2_MOSI_GPIO5_IO11	0x41
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_DATA02_GPIO3_IO8	0x41
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
+			MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
+			MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0	0x140
+			MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1	0x140
+			MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3	0x140
+			MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5	0x140
+			MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24	0x140
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
+			MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
+			MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
+			MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
+			MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
+			MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
+			MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12	0x1c4
+			MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT  0x1d0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x190
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d0
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d0
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d0
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d0
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d0
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d0
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d0
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d0
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d0
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x194
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d4
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d4
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d4
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d4
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d4
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d4
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d4
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d4
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d4
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK	0x196
+			MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD	0x1d6
+			MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d6
+			MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d6
+			MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d6
+			MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d6
+			MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4	0x1d6
+			MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d6
+			MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d6
+			MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7	0x1d6
+			MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0xc6
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi
new file mode 100644
index 000000000000..aca5ae0d307d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/ {
+	sound_card: sound-card {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,name = "imx8mm-wm8904";
+		simple-audio-card,routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN2L", "Line In Jack",
+			"IN2R", "Line In Jack",
+			"Headphone Jack", "MICBIAS",
+			"IN1L", "Headphone Jack";
+		simple-audio-card,widgets =
+			"Microphone", "Headphone Jack",
+			"Headphone", "Headphone Jack",
+			"Line", "Line In Jack";
+
+		dailink_master: simple-audio-card,codec {
+			clocks = <&clk IMX8MM_CLK_SAI2_ROOT>;
+			sound-dai = <&wm8904_1a>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+	};
+};
+
+/* Verdin SPI_1 */
+&ecspi2 {
+	status = "okay";
+};
+
+/* EEPROM on display adapter boards */
+&eeprom_display_adapter {
+	status = "okay";
+};
+
+/* EEPROM on Verdin Development board */
+&eeprom_carrier_board {
+	status = "okay";
+};
+
+&fec1 {
+	status = "okay";
+};
+
+/* Verdin QSPI_1 */
+&flexspi {
+	status = "okay";
+};
+
+/* Current measurement into module VCC */
+&hwmon {
+	status = "okay";
+};
+
+&hwmon_temp {
+	vs-supply = <&reg_1p8v>;
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+/* Verdin I2C_1 */
+&i2c4 {
+	status = "okay";
+
+	/* Audio Codec */
+	wm8904_1a: audio-codec@1a {
+		compatible = "wlf,wm8904";
+		AVDD-supply = <&reg_3p3v>;
+		clocks = <&clk IMX8MM_CLK_SAI2_ROOT>;
+		clock-names = "mclk";
+		CPVDD-supply = <&reg_3p3v>;
+		DBVDD-supply = <&reg_3p3v>;
+		DCVDD-supply = <&reg_3p3v>;
+		MICVDD-supply = <&reg_3p3v>;
+		reg = <0x1a>;
+		#sound-dai-cells = <0>;
+	};
+};
+
+/* Verdin PCIE_1 */
+&pcie0 {
+	status = "okay";
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+/* Verdin PWM_3_DSI */
+&pwm1 {
+	status = "okay";
+};
+
+/* Verdin PWM_1 */
+&pwm2 {
+	status = "okay";
+};
+
+/* Verdin PWM_2 */
+&pwm3 {
+	status = "okay";
+};
+
+/* VERDIN I2S_1 */
+&sai2 {
+	status = "okay";
+};
+
+/* Verdin UART_3 */
+&uart1 {
+	status = "okay";
+};
+
+/* Verdin UART_1 */
+&uart2 {
+	status = "okay";
+};
+
+/* Verdin UART_2 */
+&uart3 {
+	status = "okay";
+};
+
+/* Verdin USB_1 */
+&usbotg1 {
+	status = "okay";
+};
+
+/* Verdin USB_2 */
+&usbotg2 {
+	status = "okay";
+};
+
+/* Verdin SD_1 */
+&usdhc2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-dev.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin-dev.dtsi
new file mode 100644
index 000000000000..73cc3fafa018
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-dev.dtsi
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+#include "imx8mm-verdin-dahlia.dtsi"
+
+/ {
+	sound_card: sound-card {
+		compatible = "simple-audio-card";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,name = "imx8mm-nau8822";
+		simple-audio-card,routing =
+			"Headphones", "LHP",
+			"Headphones", "RHP",
+			"Speaker", "LSPK",
+			"Speaker", "RSPK",
+			"Line Out", "AUXOUT1",
+			"Line Out", "AUXOUT2",
+			"LAUX", "Line In",
+			"RAUX", "Line In",
+			"LMICP", "Mic In",
+			"RMICP", "Mic In";
+		simple-audio-card,widgets =
+			"Headphones", "Headphones",
+			"Line Out", "Line Out",
+			"Speaker", "Speaker",
+			"Microphone", "Mic In",
+			"Line", "Line In";
+
+		dailink_master: simple-audio-card,codec {
+			clocks = <&clk IMX8MM_CLK_SAI2_ROOT>;
+			sound-dai = <&nau8822_1a>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai2>;
+		};
+	};
+};
+
+&gpio_expander_21 {
+	status = "okay";
+};
+
+/* Verdin I2C_1 */
+&i2c4 {
+	/* Audio Codec */
+	nau8822_1a: audio-codec@1a {
+		compatible = "nuvoton,nau8822";
+		reg = <0x1a>;
+	};
+};
+
+/* Verdin UART_1, connector X50 through RS485 transceiver */
+&uart2 {
+	linux,rs485-enabled-at-boot-time;
+	rs485-rts-active-low;
+	rs485-rx-during-tx;
+};
+
+/* Limit frequency on dev board due to long traces and bad signal integrity */
+&usdhc2 {
+	max-frequency = <100000000>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-dahlia.dts b/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-dahlia.dts
new file mode 100644
index 000000000000..d64ff378a152
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-dahlia.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mm-verdin.dtsi"
+#include "imx8mm-verdin-nonwifi.dtsi"
+#include "imx8mm-verdin-dahlia.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Mini on Dahlia Board";
+	compatible = "toradex,verdin-imx8mm-nonwifi-dahlia",
+		     "toradex,verdin-imx8mm-nonwifi",
+		     "toradex,verdin-imx8mm",
+		     "fsl,imx8mm";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-dev.dts b/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-dev.dts
new file mode 100644
index 000000000000..6ae71ecac8de
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-dev.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mm-verdin.dtsi"
+#include "imx8mm-verdin-nonwifi.dtsi"
+#include "imx8mm-verdin-dev.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Mini on Verdin Development Board";
+	compatible = "toradex,verdin-imx8mm-nonwifi-dev",
+		     "toradex,verdin-imx8mm-nonwifi",
+		     "toradex,verdin-imx8mm",
+		     "fsl,imx8mm";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi.dtsi
new file mode 100644
index 000000000000..1e0f87c7a609
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi.dtsi
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+&gpio3 {
+	gpio-line-names = "SODIMM_52",
+			  "SODIMM_54",
+			  "SODIMM_64",
+			  "SODIMM_21",
+			  "SODIMM_206",
+			  "SODIMM_76",
+			  "SODIMM_56",
+			  "SODIMM_58",
+			  "SODIMM_60",
+			  "SODIMM_62",
+			  "SODIMM_162",
+			  "SODIMM_164",
+			  "SODIMM_166",
+			  "SODIMM_168",
+			  "SODIMM_66",
+			  "SODIMM_17",
+			  "",
+			  "SODIMM_156",
+			  "SODIMM_160",
+			  "SODIMM_244",
+			  "",
+			  "SODIMM_48",
+			  "SODIMM_44",
+			  "SODIMM_42",
+			  "SODIMM_46";
+};
+
+&gpio4 {
+	gpio-line-names = "SODIMM_102",
+			  "SODIMM_90",
+			  "SODIMM_92",
+			  "SODIMM_94",
+			  "SODIMM_96",
+			  "SODIMM_100",
+			  "SODIMM_148",
+			  "SODIMM_152",
+			  "SODIMM_154",
+			  "SODIMM_174",
+			  "SODIMM_120",
+			  "SODIMM_104",
+			  "SODIMM_106",
+			  "SODIMM_108",
+			  "SODIMM_112",
+			  "SODIMM_114",
+			  "SODIMM_116",
+			  "SODIMM_150",
+			  "SODIMM_118",
+			  "",
+			  "SODIMM_88",
+			  "SODIMM_149",
+			  "SODIMM_147",
+			  "SODIMM_36",
+			  "SODIMM_32",
+			  "SODIMM_30",
+			  "SODIMM_34",
+			  "SODIMM_38",
+			  "SODIMM_252",
+			  "SODIMM_133",
+			  "SODIMM_135",
+			  "SODIMM_129";
+};
+
+&usdhc3 {
+	bus-width = <4>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-dahlia.dts b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-dahlia.dts
new file mode 100644
index 000000000000..d424c475cba1
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-dahlia.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mm-verdin.dtsi"
+#include "imx8mm-verdin-wifi.dtsi"
+#include "imx8mm-verdin-dahlia.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Mini WB on Dahlia Board";
+	compatible = "toradex,verdin-imx8mm-wifi-dahlia",
+		     "toradex,verdin-imx8mm-wifi",
+		     "toradex,verdin-imx8mm",
+		     "fsl,imx8mm";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-dev.dts b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-dev.dts
new file mode 100644
index 000000000000..ef952021832e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-dev.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx8mm-verdin.dtsi"
+#include "imx8mm-verdin-wifi.dtsi"
+#include "imx8mm-verdin-dev.dtsi"
+
+/ {
+	model = "Toradex Verdin iMX8M Mini WB on Verdin Development Board";
+	compatible = "toradex,verdin-imx8mm-wifi-dev",
+		     "toradex,verdin-imx8mm-wifi",
+		     "toradex,verdin-imx8mm",
+		     "fsl,imx8mm";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi.dtsi
new file mode 100644
index 000000000000..3e06a6ce3406
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi.dtsi
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/ {
+	reg_wifi_en: regulator-wifi-en {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 25 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_pwr_en>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "PDn_AW-CM276NF";
+		startup-delay-us = <2000>;
+	};
+};
+
+/* On-module Wi-Fi */
+&usdhc3 {
+	bus-width = <4>;
+	keep-power-in-suspend;
+	non-removable;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_wifi_ctrl>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_wifi_ctrl>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_wifi_ctrl>;
+	vmmc-supply = <&reg_wifi_en>;
+	status = "okay";
+};
+
+&gpio3 {
+	gpio-line-names = "SODIMM_52",
+			  "SODIMM_54",
+			  "SODIMM_64",
+			  "SODIMM_21",
+			  "SODIMM_206",
+			  "SODIMM_76",
+			  "SODIMM_56",
+			  "SODIMM_58",
+			  "SODIMM_60",
+			  "SODIMM_62",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_66",
+			  "SODIMM_17",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_244",
+			  "",
+			  "SODIMM_48",
+			  "SODIMM_44",
+			  "SODIMM_42",
+			  "SODIMM_46";
+};
+
+&gpio4 {
+	gpio-line-names = "SODIMM_102",
+			  "SODIMM_90",
+			  "SODIMM_92",
+			  "SODIMM_94",
+			  "SODIMM_96",
+			  "SODIMM_100",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_120",
+			  "SODIMM_104",
+			  "SODIMM_106",
+			  "SODIMM_108",
+			  "SODIMM_112",
+			  "SODIMM_114",
+			  "SODIMM_116",
+			  "",
+			  "SODIMM_118",
+			  "",
+			  "SODIMM_88",
+			  "SODIMM_149",
+			  "SODIMM_147",
+			  "SODIMM_36",
+			  "SODIMM_32",
+			  "SODIMM_30",
+			  "SODIMM_34",
+			  "SODIMM_38",
+			  "SODIMM_252",
+			  "SODIMM_133",
+			  "SODIMM_135",
+			  "SODIMM_129";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
new file mode 100644
index 000000000000..0d84d29e70f1
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
@@ -0,0 +1,1264 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+#include "dt-bindings/phy/phy-imx8-pcie.h"
+#include "dt-bindings/pwm/pwm.h"
+#include "imx8mm.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	aliases {
+		rtc0 = &rtc_i2c;
+		rtc1 = &snvs_rtc;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 45 63 88 119 158 203 255>;
+		default-brightness-level = <4>;
+		/* Verdin I2S_2_D_OUT (DSI_1_BKL_EN/DSI_1_BKL_EN_LVDS, SODIMM 46) */
+		enable-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2s_2_d_out_dsi_1_bkl_en>;
+		power-supply = <&reg_3p3v>;
+		/* Verdin PWM_3_DSI/PWM_3_DSI_LVDS (SODIMM 19) */
+		pwms = <&pwm1 0 6666667 PWM_POLARITY_INVERTED>;
+		status = "disabled";
+	};
+
+	/* Fixed clock dedicated to SPI CAN controller */
+	clk20m: oscillator {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <20000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		wakeup {
+			debounce-interval = <10>;
+			/* Verdin CTRL_WAKE1_MICO# (SODIMM 252) */
+			gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
+			label = "Wake-Up";
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+
+	/* Carrier Board Supplies */
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "+V1.8_SW";
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "+V3.3_SW";
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "+V5_SW";
+	};
+
+	/* Non PMIC On-module Supplies */
+	reg_ethphy: regulator-ethphy {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>; /* PMIC_EN_ETH */
+		off-on-delay = <500000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_eth>;
+		regulator-boot-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "+V3.3_ETH";
+		startup-delay-us = <200000>;
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		/* Verdin USB_1_EN (SODIMM 155) */
+		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb1_en>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usb_otg1_vbus";
+	};
+
+	reg_usb_otg2_vbus: regulator-usb-otg2 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		/* Verdin USB_2_EN (SODIMM 185) */
+		gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb2_en>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usb_otg2_vbus";
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		/* Verdin SD_1_PWR_EN (SODIMM 76) */
+		gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>;
+		off-on-delay = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc2_pwr_en>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "+V3.3_SD";
+		startup-delay-us = <2000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* Use the kernel configuration settings instead */
+		/delete-node/ linux,cma;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_1 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_2 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&A53_3 {
+	cpu-supply = <&reg_vdd_arm>;
+};
+
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25M {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100M {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-750M {
+			opp-hz = /bits/ 64 <750000000>;
+		};
+	};
+};
+
+/* Verdin SPI_1 */
+&ecspi2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+};
+
+/* Verdin CAN_1 (On-module) */
+&ecspi3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	status = "okay";
+
+	can1: can@0 {
+		compatible = "microchip,mcp251xfd";
+		clocks = <&clk20m>;
+		interrupts-extended = <&gpio1 6 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can1_int>;
+		reg = <0>;
+		spi-max-frequency = <8500000>;
+	};
+};
+
+/* Verdin ETH_1 (On-module PHY) */
+&fec1 {
+	fsl,magic-packet;
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&reg_ethphy>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_fec1>;
+	pinctrl-1 = <&pinctrl_fec1_sleep>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@7 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			interrupt-parent = <&gpio1>;
+			interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+			micrel,led-mode = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+/* Verdin QSPI_1 */
+&flexspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi0>;
+};
+
+&gpio1 {
+	gpio-line-names = "SODIMM_216",
+			  "SODIMM_19",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_220",
+			  "SODIMM_222",
+			  "",
+			  "SODIMM_218",
+			  "SODIMM_155",
+			  "SODIMM_157",
+			  "SODIMM_185",
+			  "SODIMM_187";
+};
+
+&gpio2 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_84",
+			  "SODIMM_78",
+			  "SODIMM_74",
+			  "SODIMM_80",
+			  "SODIMM_82",
+			  "SODIMM_70",
+			  "SODIMM_72";
+};
+
+&gpio5 {
+	gpio-line-names = "SODIMM_131",
+			  "",
+			  "SODIMM_91",
+			  "SODIMM_16",
+			  "SODIMM_15",
+			  "SODIMM_208",
+			  "SODIMM_137",
+			  "SODIMM_139",
+			  "SODIMM_141",
+			  "SODIMM_143",
+			  "SODIMM_196",
+			  "SODIMM_200",
+			  "SODIMM_198",
+			  "SODIMM_202",
+			  "",
+			  "",
+			  "SODIMM_55",
+			  "SODIMM_53",
+			  "SODIMM_95",
+			  "SODIMM_93",
+			  "SODIMM_14",
+			  "SODIMM_12",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_210",
+			  "SODIMM_212",
+			  "SODIMM_151",
+			  "SODIMM_153";
+
+	ctrl_sleep_moci-hog {
+		gpio-hog;
+		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
+		gpios = <1 GPIO_ACTIVE_HIGH>;
+		line-name = "CTRL_SLEEP_MOCI#";
+		output-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
+	};
+};
+
+/* On-module I2C */
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pca9450: pmic@25 {
+		compatible = "nxp,pca9450a";
+		interrupt-parent = <&gpio1>;
+		/* PMIC PCA9450 PMIC_nINT GPIO1_IO3 */
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		reg = <0x25>;
+		sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+
+		regulators {
+			reg_vdd_soc: BUCK1 {
+				nxp,dvs-run-voltage = <850000>;
+				nxp,dvs-standby-voltage = <800000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <850000>;
+				regulator-min-microvolt = <800000>;
+				regulator-name = "+VDD_SOC";
+				regulator-ramp-delay = <3125>;
+			};
+
+			reg_vdd_arm: BUCK2 {
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <950000>;
+				regulator-min-microvolt = <850000>;
+				regulator-name = "+VDD_ARM";
+				regulator-ramp-delay = <3125>;
+			};
+
+			reg_vdd_dram: BUCK3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <950000>;
+				regulator-min-microvolt = <850000>;
+				regulator-name = "+VDD_GPU_VPU_DDR";
+			};
+
+			reg_vdd_3v3: BUCK4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <3300000>;
+				regulator-name = "+V3.3";
+			};
+
+			reg_vdd_1v8: BUCK5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "PWR_1V8_MOCI";
+			};
+
+			reg_nvcc_dram: BUCK6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1100000>;
+				regulator-min-microvolt = <1100000>;
+				regulator-name = "+VDD_DDR";
+			};
+
+			reg_nvcc_snvs: LDO1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "+V1.8_SNVS";
+			};
+
+			reg_vdd_snvs: LDO2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <900000>;
+				regulator-min-microvolt = <800000>;
+				regulator-name = "+V0.8_SNVS";
+			};
+
+			reg_vdda: LDO3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "+V1.8A";
+			};
+
+			reg_vdd_phy: LDO4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <900000>;
+				regulator-min-microvolt = <900000>;
+				regulator-name = "+V0.9_MIPI";
+			};
+
+			reg_nvcc_sd: LDO5 {
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "+V3.3_1.8_SD";
+			};
+		};
+	};
+
+	rtc_i2c: rtc@32 {
+		compatible = "epson,rx8130";
+		reg = <0x32>;
+	};
+
+	adc@49 {
+		compatible = "ti,ads1015";
+		reg = <0x49>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Verdin I2C_1 (ADC_4 - ADC_3) */
+		channel@0 {
+			reg = <0>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin I2C_1 (ADC_4 - ADC_1) */
+		channel@1 {
+			reg = <1>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin I2C_1 (ADC_3 - ADC_1) */
+		channel@2 {
+			reg = <2>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin I2C_1 (ADC_2 - ADC_1) */
+		channel@3 {
+			reg = <3>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin I2C_1 ADC_4 */
+		channel@4 {
+			reg = <4>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin I2C_1 ADC_3 */
+		channel@5 {
+			reg = <5>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin I2C_1 ADC_2 */
+		channel@6 {
+			reg = <6>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+
+		/* Verdin I2C_1 ADC_1 */
+		channel@7 {
+			reg = <7>;
+			ti,datarate = <4>;
+			ti,gain = <2>;
+		};
+	};
+
+	eeprom@50 {
+		compatible = "st,24c02";
+		pagesize = <16>;
+		reg = <0x50>;
+	};
+};
+
+/* Verdin I2C_2_DSI */
+&i2c2 {
+	clock-frequency = <10000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "disabled";
+};
+
+/* Verdin I2C_3_HDMI N/A */
+
+/* Verdin I2C_4_CSI */
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+/* Verdin I2C_1 */
+&i2c4 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_gpio>;
+	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	gpio_expander_21: gpio-expander@21 {
+		compatible = "nxp,pcal6416";
+		#gpio-cells = <2>;
+		gpio-controller;
+		reg = <0x21>;
+		vcc-supply = <&reg_3p3v>;
+		status = "disabled";
+	};
+
+	lvds_ti_sn65dsi83: bridge@2c {
+		compatible = "ti,sn65dsi83";
+		/* Verdin GPIO_9_DSI (SN65DSI84 IRQ, SODIMM 17, unused) */
+		/* Verdin GPIO_10_DSI (SODIMM 21) */
+		enable-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_10_dsi>;
+		reg = <0x2c>;
+		status = "disabled";
+	};
+
+	/* Current measurement into module VCC */
+	hwmon: hwmon@40 {
+		compatible = "ti,ina219";
+		reg = <0x40>;
+		shunt-resistor = <10000>;
+		status = "disabled";
+	};
+
+	hdmi_lontium_lt8912: hdmi@48 {
+		compatible = "lontium,lt8912b";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_10_dsi>, <&pinctrl_pwm_3_dsi_hpd_gpio>;
+		reg = <0x48>;
+		/* Verdin GPIO_9_DSI (LT8912 INT, SODIMM 17, unused) */
+		/* Verdin GPIO_10_DSI (SODIMM 21) */
+		reset-gpios = <&gpio3 3 GPIO_ACTIVE_LOW>;
+		status = "disabled";
+	};
+
+	atmel_mxt_ts: touch@4a {
+		compatible = "atmel,maxtouch";
+		/* Verdin GPIO_9_DSI */
+		/* (TOUCH_INT#, SODIMM 17, also routed to SN65dsi83 IRQ albeit currently unused) */
+		interrupt-parent = <&gpio3>;
+		interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_9_dsi>, <&pinctrl_i2s_2_bclk_touch_reset>;
+		reg = <0x4a>;
+		/* Verdin I2S_2_BCLK (TOUCH_RESET#, SODIMM 42) */
+		reset-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	/* Temperature sensor on carrier board */
+	hwmon_temp: sensor@4f {
+		compatible = "ti,tmp75c";
+		reg = <0x4f>;
+		status = "disabled";
+	};
+
+	/* EEPROM on display adapter (MIPI DSI Display Adapter) */
+	eeprom_display_adapter: eeprom@50 {
+		compatible = "st,24c02";
+		pagesize = <16>;
+		reg = <0x50>;
+		status = "disabled";
+	};
+
+	/* EEPROM on carrier board */
+	eeprom_carrier_board: eeprom@57 {
+		compatible = "st,24c02";
+		pagesize = <16>;
+		reg = <0x57>;
+		status = "disabled";
+	};
+};
+
+/* Verdin PCIE_1 */
+&pcie0 {
+	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+				 <&clk IMX8MM_SYS_PLL2_250M>;
+	assigned-clock-rates = <10000000>, <250000000>;
+	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
+		 <&clk IMX8MM_CLK_PCIE1_PHY>;
+	clock-names = "pcie", "pcie_aux", "pcie_bus";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	/* PCIE_1_RESET# (SODIMM 244) */
+	reset-gpio = <&gpio3 19 GPIO_ACTIVE_LOW>;
+};
+
+&pcie_phy {
+	clocks = <&clk IMX8MM_CLK_PCIE1_PHY>;
+	fsl,clkreq-unsupported;
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
+	fsl,tx-deemph-gen1 = <0x2d>;
+	fsl,tx-deemph-gen2 = <0xf>;
+};
+
+/* Verdin PWM_3_DSI */
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_1>;
+	#pwm-cells = <3>;
+};
+
+/* Verdin PWM_1 */
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_2>;
+	#pwm-cells = <3>;
+};
+
+/* Verdin PWM_2 */
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_3>;
+	#pwm-cells = <3>;
+};
+
+/* VERDIN I2S_1 */
+&sai2 {
+	#sound-dai-cells = <0>;
+	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <24576000>;
+	assigned-clocks = <&clk IMX8MM_CLK_SAI2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai2>;
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+/* Verdin UART_3, used as the Linux console */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+};
+
+/* Verdin UART_1 */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+};
+
+/* Verdin UART_2 */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+};
+
+/* Verdin UART_4 */
+/*
+ * Resource allocated to M4 by default, must not be accessed from Cortex-A35 or you get an OOPS
+ */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+};
+
+/* Verdin USB_1 */
+&usbotg1 {
+	adp-disable;
+	dr_mode = "otg";
+	hnp-disable;
+	over-current-active-low;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	srp-disable;
+	vbus-supply = <&reg_usb_otg1_vbus>;
+};
+
+/* Verdin USB_2 */
+&usbotg2 {
+	dr_mode = "host";
+	over-current-active-low;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	vbus-supply = <&reg_usb_otg2_vbus>;
+};
+
+&usbphynop1 {
+	vcc-supply = <&reg_vdd_3v3>;
+};
+
+&usbphynop2 {
+	vcc-supply = <&reg_vdd_3v3>;
+};
+
+/* On-module eMMC */
+&usdhc1 {
+	bus-width = <8>;
+	keep-power-in-suspend;
+	non-removable;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	status = "okay";
+};
+
+/* Verdin SD_1 */
+&usdhc2 {
+	bus-width = <4>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_cd>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_cd>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_cd>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+};
+
+&wdog1 {
+	fsl,ext-reset-output;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio1>, <&pinctrl_gpio2>,
+		    <&pinctrl_gpio3>, <&pinctrl_gpio4>,
+		    <&pinctrl_gpio7>, <&pinctrl_gpio8>,
+		    <&pinctrl_gpio_hog1>, <&pinctrl_gpio_hog2>, <&pinctrl_gpio_hog3>,
+		    <&pinctrl_pmic_tpm_ena>;
+
+	pinctrl_can1_int: can1intgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6		0x1c4>;	/* CAN_1_SPI_INT#_1.8V */
+	};
+
+	pinctrl_can2_int: can2intgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x1c4>;	/* CAN_2_SPI_INT#_1.8V */
+	};
+
+	pinctrl_ctrl_sleep_moci: ctrlsleepmocigrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SAI3_TXD_GPIO5_IO1		0x1c4>;	/* SODIMM 256 */
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK		0x4>,	/* SODIMM 196 */
+			<MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI		0x4>,	/* SODIMM 200 */
+			<MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO		0x1c4>,	/* SODIMM 198 */
+			<MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13		0x1c4>;	/* SODIMM 202 */
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK		0x4>,	/* CAN_SPI_SCK_1.8V */
+			<MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI		0x4>,	/* CAN_SPI_MOSI_1.8V */
+			<MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO		0x1c4>,	/* CAN_SPI_MISO_1.8V */
+			<MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25		0x1c4>,	/* CAN_1_SPI_CS_1.8V# */
+			<MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5		0x1c4>;	/* CAN_2_SPI_CS#_1.8V */
+	};
+
+	pinctrl_fec1: fec1grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_ENET_MDC_ENET1_MDC		0x3>,
+			<MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3>,
+			<MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f>,
+			<MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f>,
+			<MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f>,
+			<MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f>,
+			<MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91>,
+			<MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91>,
+			<MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91>,
+			<MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91>,
+			<MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f>,
+			<MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91>,
+			<MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91>,
+			<MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f>,
+			<MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x1c4>;
+	};
+
+	pinctrl_fec1_sleep: fec1-sleepgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_ENET_MDC_ENET1_MDC		0x3>,
+			<MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3>,
+			<MX8MM_IOMUXC_ENET_TD3_GPIO1_IO18		0x1f>,
+			<MX8MM_IOMUXC_ENET_TD2_GPIO1_IO19		0x1f>,
+			<MX8MM_IOMUXC_ENET_TD1_GPIO1_IO20		0x1f>,
+			<MX8MM_IOMUXC_ENET_TD0_GPIO1_IO21		0x1f>,
+			<MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91>,
+			<MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91>,
+			<MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91>,
+			<MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91>,
+			<MX8MM_IOMUXC_ENET_TXC_GPIO1_IO23		0x1f>,
+			<MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91>,
+			<MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91>,
+			<MX8MM_IOMUXC_ENET_TX_CTL_GPIO1_IO22		0x1f>,
+			<MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x184>;
+	};
+
+	pinctrl_flexspi0: flexspi0grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK		0x1c2>,	/* SODIMM 52 */
+			<MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B		0x82>,	/* SODIMM 54 */
+			<MX8MM_IOMUXC_NAND_CE1_B_QSPI_A_SS1_B		0x82>,	/* SODIMM 64 */
+			<MX8MM_IOMUXC_NAND_DQS_QSPI_A_DQS		0x82>,	/* SODIMM 66 */
+			<MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0		0x82>,	/* SODIMM 56 */
+			<MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1		0x82>,	/* SODIMM 58 */
+			<MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2		0x82>,	/* SODIMM 60 */
+			<MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3		0x82>;	/* SODIMM 62 */
+	};
+
+	pinctrl_gpio1: gpio1grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_NAND_CE3_B_GPIO3_IO4		0x184>;	/* SODIMM 206 */
+	};
+
+	pinctrl_gpio2: gpio2grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5		0x1c4>;	/* SODIMM 208 */
+	};
+
+	pinctrl_gpio3: gpio3grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_UART3_RXD_GPIO5_IO26		0x184>;	/* SODIMM 210 */
+	};
+
+	pinctrl_gpio4: gpio4grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_UART3_TXD_GPIO5_IO27		0x184>;	/* SODIMM 212 */
+	};
+
+	pinctrl_gpio5: gpio5grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0		0x184>;	/* SODIMM 216 */
+	};
+
+	pinctrl_gpio6: gpio6grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11		0x184>;	/* SODIMM 218 */
+	};
+
+	pinctrl_gpio7: gpio7grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8		0x184>;	/* SODIMM 220 */
+	};
+
+	pinctrl_gpio8: gpio8grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x184>;	/* SODIMM 222 */
+	};
+
+	/* Verdin GPIO_9_DSI (pulled-up as active-low) */
+	pinctrl_gpio_9_dsi: gpio9dsigrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15		0x1c4>;	/* SODIMM 17 */
+	};
+
+	/* Verdin GPIO_10_DSI */
+	pinctrl_gpio_10_dsi: gpio10dsigrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_NAND_CE2_B_GPIO3_IO3		0x1c4>;	/* SODIMM 21 */
+	};
+
+	pinctrl_gpio_hog1: gpiohog1grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SAI1_MCLK_GPIO4_IO20		0x1c4>,	/* SODIMM 88 */
+			<MX8MM_IOMUXC_SAI1_RXC_GPIO4_IO1		0x1c4>,	/* SODIMM 90 */
+			<MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2		0x1c4>,	/* SODIMM 92 */
+			<MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3		0x1c4>,	/* SODIMM 94 */
+			<MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4		0x1c4>,	/* SODIMM 96 */
+			<MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5		0x1c4>,	/* SODIMM 100 */
+			<MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0		0x1c4>,	/* SODIMM 102 */
+			<MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11		0x1c4>,	/* SODIMM 104 */
+			<MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12		0x1c4>,	/* SODIMM 106 */
+			<MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13		0x1c4>,	/* SODIMM 108 */
+			<MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14		0x1c4>,	/* SODIMM 112 */
+			<MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15		0x1c4>,	/* SODIMM 114 */
+			<MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16		0x1c4>,	/* SODIMM 116 */
+			<MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18		0x1c4>,	/* SODIMM 118 */
+			<MX8MM_IOMUXC_SAI1_TXFS_GPIO4_IO10		0x1c4>;	/* SODIMM 120 */
+	};
+
+	pinctrl_gpio_hog2: gpiohog2grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2		0x1c4>;	/* SODIMM 91 */
+	};
+
+	pinctrl_gpio_hog3: gpiohog3grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13		0x1c4>,	/* SODIMM 157 */
+			<MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15		0x1c4>;	/* SODIMM 187 */
+	};
+
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28		0x1c4>;	/* SODIMM 252 */
+	};
+
+	/* On-module I2C */
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x400001c6>,	/* PMIC_I2C_SCL */
+			<MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x400001c6>;	/* PMIC_I2C_SDA */
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14		0x400001c6>,	/* PMIC_I2C_SCL */
+			<MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15		0x400001c6>;	/* PMIC_I2C_SDA */
+	};
+
+	/* Verdin I2C_4_CSI */
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL			0x400001c6>,	/* SODIMM 55 */
+			<MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA			0x400001c6>;	/* SODIMM 53 */
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16		0x400001c6>,	/* SODIMM 55 */
+			<MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17		0x400001c6>;	/* SODIMM 53 */
+	};
+
+	/* Verdin I2C_2_DSI */
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL			0x400001c6>,	/* SODIMM 95 */
+			<MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA			0x400001c6>;	/* SODIMM 93 */
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18		0x400001c6>,	/* SODIMM 95 */
+			<MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19		0x400001c6>;	/* SODIMM 93 */
+	};
+
+	/* Verdin I2C_1 */
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL			0x400001c6>,	/* SODIMM 14 */
+			<MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA			0x400001c6>;	/* SODIMM 12 */
+	};
+
+	pinctrl_i2c4_gpio: i2c4gpiogrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_I2C4_SCL_GPIO5_IO20		0x400001c6>,	/* SODIMM 14 */
+			<MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21		0x400001c6>;	/* SODIMM 12 */
+	};
+
+	/* Verdin I2S_2_BCLK (TOUCH_RESET#) */
+	pinctrl_i2s_2_bclk_touch_reset: i2s2bclktouchresetgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SAI5_RXD2_GPIO3_IO23		0x184>;	/* SODIMM 42 */
+	};
+
+	/* Verdin I2S_2_D_OUT shared with SAI5 */
+	pinctrl_i2s_2_d_out_dsi_1_bkl_en: i2s2doutdsi1bklengrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24		0x184>;	/* SODIMM 46 */
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SAI5_RXFS_GPIO3_IO19		0x6>,	/* SODIMM 244 */
+			/* PMIC_EN_PCIe_CLK, unused */
+			<MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19		0x6>;
+	};
+
+	pinctrl_pmic: pmicirqgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x41>;	/* PMIC_INT# */
+	};
+
+	/* Verdin PWM_3_DSI shared with GPIO1_IO1 */
+	pinctrl_pwm_1: pwm1grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_GPIO1_IO01_PWM1_OUT		0x6>;	/* SODIMM 19 */
+	};
+
+	pinctrl_pwm_2: pwm2grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SPDIF_RX_PWM2_OUT			0x6>;	/* SODIMM 15 */
+	};
+
+	pinctrl_pwm_3: pwm3grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SPDIF_TX_PWM3_OUT			0x6>;	/* SODIMM 16 */
+	};
+
+	/* Verdin PWM_3_DSI (pulled-down as active-high) shared with PWM1_OUT */
+	pinctrl_pwm_3_dsi_hpd_gpio: pwm3dsihpdgpiogrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1		0x184>;	/* SODIMM 19 */
+	};
+
+	pinctrl_reg_eth: regethgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SD2_WP_GPIO2_IO20			0x184>;	/* PMIC_EN_ETH */
+	};
+
+	pinctrl_reg_usb1_en: regusb1engrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12		0x184>;	/* SODIMM 155 */
+	};
+
+	pinctrl_reg_usb2_en: regusb2engrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14		0x184>;	/* SODIMM 185 */
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC		0xd6>,	/* SODIMM 32 */
+			<MX8MM_IOMUXC_SAI2_TXC_SAI2_TX_BCLK		0xd6>,	/* SODIMM 30 */
+			<MX8MM_IOMUXC_SAI2_MCLK_SAI2_MCLK		0xd6>,	/* SODIMM 38 */
+			<MX8MM_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0		0xd6>,	/* SODIMM 36 */
+			<MX8MM_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0		0xd6>;	/* SODIMM 34 */
+	};
+
+	pinctrl_sai5: sai5grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SAI5_RXD0_SAI5_RX_DATA0		0xd6>,	/* SODIMM 48 */
+			<MX8MM_IOMUXC_SAI5_RXD1_SAI5_TX_SYNC		0xd6>,	/* SODIMM 44 */
+			<MX8MM_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK		0xd6>,	/* SODIMM 42 */
+			<MX8MM_IOMUXC_SAI5_RXD3_SAI5_TX_DATA0		0xd6>;	/* SODIMM 46 */
+	};
+
+	/* control signal for optional ATTPM20P or SE050 */
+	pinctrl_pmic_tpm_ena: pmictpmenagrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19		0x1c4>;	/* PMIC_TPM_ENA */
+	};
+
+	pinctrl_tsp: tspgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6		0x140>,	/* SODIMM 148 */
+			<MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7		0x140>,	/* SODIMM 152 */
+			<MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8		0x140>,	/* SODIMM 154 */
+			<MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9		0x140>,	/* SODIMM 174 */
+			<MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17		0x140>;	/* SODIMM 150 */
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX		0x1c4>,	/* SODIMM 149 */
+			<MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX		0x1c4>;	/* SODIMM 147 */
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX		0x1c4>,	/* SODIMM 129 */
+			<MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX		0x1c4>,	/* SODIMM 131 */
+			<MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B		0x1c4>,	/* SODIMM 133 */
+			<MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B		0x1c4>;	/* SODIMM 135 */
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX		0x1c4>,	/* SODIMM 137 */
+			<MX8MM_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX		0x1c4>,	/* SODIMM 139 */
+			<MX8MM_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B	0x1c4>,	/* SODIMM 141 */
+			<MX8MM_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B	0x1c4>;	/* SODIMM 143 */
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX		0x1c4>,	/* SODIMM 151 */
+			<MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX		0x1c4>;	/* SODIMM 153 */
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x190>,
+			<MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d0>,
+			<MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d0>,
+			<MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d0>,
+			<MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d0>,
+			<MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d0>,
+			<MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x1d0>,
+			<MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x1d0>,
+			<MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x1d0>,
+			<MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x1d0>,
+			<MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B	0x1d1>,
+			<MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x190>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x194>,
+			<MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d4>,
+			<MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d4>,
+			<MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d4>,
+			<MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d4>,
+			<MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d4>,
+			<MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x1d4>,
+			<MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x1d4>,
+			<MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x1d4>,
+			<MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x1d4>,
+			<MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B	0x1d1>,
+			<MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x194>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x196>,
+			<MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d6>,
+			<MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d6>,
+			<MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d6>,
+			<MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d6>,
+			<MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d6>,
+			<MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x1d6>,
+			<MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x1d6>,
+			<MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x1d6>,
+			<MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x1d6>,
+			<MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B	0x1d1>,
+			<MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x196>;
+	};
+
+	pinctrl_usdhc2_cd: usdhc2cdgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x1c4>;	/* SODIMM 84 */
+	};
+
+	pinctrl_usdhc2_pwr_en: usdhc2pwrengrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_NAND_CLE_GPIO3_IO5		0x184>;	/* SODIMM 76 */
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190>,	/* SODIMM 78 */
+			<MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0>,	/* SODIMM 74 */
+			<MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d0>,	/* SODIMM 80 */
+			<MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d0>,	/* SODIMM 82 */
+			<MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d0>,	/* SODIMM 70 */
+			<MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d0>,	/* SODIMM 72 */
+			<MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194>,
+			<MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4>,
+			<MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4>,
+			<MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4>,
+			<MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4>,
+			<MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4>,
+			<MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196>,
+			<MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6>,
+			<MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d6>,
+			<MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d6>,
+			<MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d6>,
+			<MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d6>,
+			<MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0>;
+	};
+
+	/* On-module Wi-Fi/BT or type specific SDHC interface */
+	/* (e.g. on X52 extension slot of Verdin Development Board) */
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins =
+			<MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x190>,
+			<MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d0>,
+			<MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d0>,
+			<MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d0>,
+			<MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d0>,
+			<MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d0>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x194>,
+			<MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d4>,
+			<MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d4>,
+			<MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d4>,
+			<MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d4>,
+			<MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d4>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x196>,
+			<MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d6>,
+			<MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d6>,
+			<MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d6>,
+			<MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d6>,
+			<MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d6>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0xc6>;	/* PMIC_WDI */
+	};
+
+	pinctrl_wifi_ctrl: wifictrlgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16		0x1c4>,	/* WIFI_WKUP_BT */
+			<MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9		0x1c4>,	/* WIFI_W_WKUP_HOST */
+			<MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20		0x1c4>;	/* WIFI_WKUP_WLAN */
+	};
+
+	pinctrl_wifi_i2s: bti2sgrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SAI1_RXD4_SAI6_TX_BCLK		0xd6>,	/* WIFI_TX_BCLK */
+			<MX8MM_IOMUXC_SAI1_RXD5_SAI6_TX_DATA0		0xd6>,	/* WIFI_TX_DATA0 */
+			<MX8MM_IOMUXC_SAI1_RXD6_SAI6_TX_SYNC		0xd6>,	/* WIFI_TX_SYNC */
+			<MX8MM_IOMUXC_SAI1_TXD5_SAI6_RX_DATA0		0xd6>;	/* WIFI_RX_DATA0 */
+	};
+
+	pinctrl_wifi_pwr_en: wifipwrengrp {
+		fsl,pins =
+			<MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25		0x184>;	/* PMIC_EN_WIFI */
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index f77f90ed416f..1ee05677c2dd 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -548,7 +548,7 @@
 			};
 
 			gpr: iomuxc-gpr@30340000 {
-				compatible = "fsl,imx8mm-iomuxc-gpr", "syscon";
+				compatible = "fsl,imx8mm-iomuxc-gpr", "fsl,imx6q-iomuxc-gpr", "syscon";
 				reg = <0x30340000 0x10000>;
 			};
 
@@ -707,7 +707,6 @@
 						clocks = <&clk IMX8MM_CLK_VPU_DEC_ROOT>;
 						assigned-clocks = <&clk IMX8MM_CLK_VPU_BUS>;
 						assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>;
-						resets = <&src IMX8MQ_RESET_VPU_RESET>;
 					};
 
 					pgc_vpu_g1: power-domain@7 {
@@ -1211,6 +1210,19 @@
 				reg = <0x32e50200 0x200>;
 			};
 
+			pcie_phy: pcie-phy@32f00000 {
+				compatible = "fsl,imx8mm-pcie-phy";
+				reg = <0x32f00000 0x10000>;
+				clocks = <&clk IMX8MM_CLK_PCIE1_PHY>;
+				clock-names = "ref";
+				assigned-clocks = <&clk IMX8MM_CLK_PCIE1_PHY>;
+				assigned-clock-rates = <100000000>;
+				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_100M>;
+				resets = <&src IMX8MQ_RESET_PCIEPHY>;
+				reset-names = "pciephy";
+				#phy-cells = <0>;
+				status = "disabled";
+			};
 		};
 
 		dma_apbh: dma-controller@33000000 {
@@ -1242,6 +1254,37 @@
 			status = "disabled";
 		};
 
+		pcie0: pcie@33800000 {
+			compatible = "fsl,imx8mm-pcie";
+			reg = <0x33800000 0x400000>, <0x1ff00000 0x80000>;
+			reg-names = "dbi", "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			bus-range = <0x00 0xff>;
+			ranges =  <0x81000000 0 0x00000000 0x1ff80000 0 0x00010000 /* downstream I/O 64KB */
+				   0x82000000 0 0x18000000 0x18000000 0 0x07f00000>; /* non-prefetchable memory */
+			num-lanes = <1>;
+			num-viewport = <4>;
+			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &gic GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gic GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gic GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gic GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+			fsl,max-link-speed = <2>;
+			linux,pci-domain = <0>;
+			power-domains = <&pgc_pcie>;
+			resets = <&src IMX8MQ_RESET_PCIE_CTRL_APPS_EN>,
+				 <&src IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF>;
+			reset-names = "apps", "turnoff";
+			phys = <&pcie_phy>;
+			phy-names = "pcie-phy";
+			status = "disabled";
+		};
+
 		gpu_3d: gpu@38000000 {
 			compatible = "vivante,gc";
 			reg = <0x38000000 0x8000>;
@@ -1273,6 +1316,22 @@
 			power-domains = <&pgc_gpu>;
 		};
 
+		vpu_g1: video-codec@38300000 {
+			compatible = "nxp,imx8mm-vpu-g1";
+			reg = <0x38300000 0x10000>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX8MM_CLK_VPU_G1_ROOT>;
+			power-domains = <&vpu_blk_ctrl IMX8MM_VPUBLK_PD_G1>;
+		};
+
+		vpu_g2: video-codec@38310000 {
+			compatible = "nxp,imx8mq-vpu-g2";
+			reg = <0x38310000 0x10000>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX8MM_CLK_VPU_G2_ROOT>;
+			power-domains = <&vpu_blk_ctrl IMX8MM_VPUBLK_PD_G2>;
+		};
+
 		vpu_blk_ctrl: blk-ctrl@38330000 {
 			compatible = "fsl,imx8mm-vpu-blk-ctrl", "syscon";
 			reg = <0x38330000 0x100>;
@@ -1283,6 +1342,12 @@
 				 <&clk IMX8MM_CLK_VPU_G2_ROOT>,
 				 <&clk IMX8MM_CLK_VPU_H1_ROOT>;
 			clock-names = "g1", "g2", "h1";
+			assigned-clocks = <&clk IMX8MM_CLK_VPU_G1>,
+					  <&clk IMX8MM_CLK_VPU_G2>;
+			assigned-clock-parents = <&clk IMX8MM_VPU_PLL_OUT>,
+						 <&clk IMX8MM_VPU_PLL_OUT>;
+			assigned-clock-rates = <600000000>,
+					       <600000000>;
 			#power-domain-cells = <1>;
 		};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
index 236f425e1570..3c0e63d2e82d 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
@@ -220,6 +220,10 @@
 	};
 };
 
+&disp_blk_ctrl {
+	status = "disabled";
+};
+
 /* off-board header */
 &ecspi2 {
 	pinctrl-names = "default";
@@ -251,6 +255,47 @@
 	};
 };
 
+&gpio1 {
+	gpio-line-names = "", "", "", "", "", "", "", "",
+		"", "", "", "", "", "m2_reset", "", "m2_wdis#",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names = "", "", "", "", "", "", "", "",
+		"uart2_en#", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names = "", "m2_gdis#", "", "", "", "", "", "m2_off#",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names = "", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "app_gpio1", "", "uart1_rs485",
+		"", "uart1_term", "uart1_half", "app_gpio2",
+		"mipi_gpio1", "", "", "";
+};
+
+&gpio5 {
+	gpio-line-names = "", "", "", "mipi_gpio4",
+		"mipi_gpio3", "mipi_gpio2", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpu {
+	status = "disabled";
+};
+
 &i2c1 {
 	clock-frequency = <100000>;
 	pinctrl-names = "default";
@@ -546,6 +591,10 @@
 	status = "okay";
 };
 
+&pgc_gpumix {
+	status = "disabled";
+};
+
 /* off-board header */
 &sai3 {
 	pinctrl-names = "default";
@@ -633,7 +682,7 @@
 	pinctrl_hog: hoggrp {
 		fsl,pins = <
 			MX8MN_IOMUXC_NAND_CE0_B_GPIO3_IO1	0x40000159 /* M2_GDIS# */
-			MX8MN_IOMUXC_GPIO1_IO13_GPIO1_IO13	0x40000041 /* M2_RST# */
+			MX8MN_IOMUXC_GPIO1_IO13_GPIO1_IO13	0x40000041 /* M2_RESET */
 			MX8MN_IOMUXC_NAND_DATA01_GPIO3_IO7	0x40000119 /* M2_OFF# */
 			MX8MN_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x40000159 /* M2_WDIS# */
 			MX8MN_IOMUXC_SAI2_RXFS_GPIO4_IO21	0x40000041 /* APP GPIO1 */
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index b8d49d5f2668..99f0f5026674 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -4,6 +4,8 @@
  */
 
 #include <dt-bindings/clock/imx8mn-clock.h>
+#include <dt-bindings/power/imx8mn-power.h>
+#include <dt-bindings/reset/imx8mq-reset.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -640,6 +642,53 @@
 				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 				#reset-cells = <1>;
 			};
+
+			gpc: gpc@303a0000 {
+				compatible = "fsl,imx8mn-gpc";
+				reg = <0x303a0000 0x10000>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+
+				pgc {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					pgc_hsiomix: power-domain@0 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MN_POWER_DOMAIN_HSIOMIX>;
+						clocks = <&clk IMX8MN_CLK_USB_BUS>;
+					};
+
+					pgc_otg1: power-domain@1 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MN_POWER_DOMAIN_OTG1>;
+						power-domains = <&pgc_hsiomix>;
+					};
+
+					pgc_gpumix: power-domain@2 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MN_POWER_DOMAIN_GPUMIX>;
+						clocks = <&clk IMX8MN_CLK_GPU_CORE_ROOT>,
+							 <&clk IMX8MN_CLK_GPU_SHADER>,
+							 <&clk IMX8MN_CLK_GPU_BUS_ROOT>,
+							 <&clk IMX8MN_CLK_GPU_AHB>;
+						resets = <&src IMX8MQ_RESET_GPU_RESET>;
+					};
+
+					pgc_dispmix: power-domain@3 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MN_POWER_DOMAIN_DISPMIX>;
+						clocks = <&clk IMX8MN_CLK_DISP_AXI_ROOT>,
+							 <&clk IMX8MN_CLK_DISP_APB_ROOT>;
+					};
+
+					pgc_mipi: power-domain@4 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MN_POWER_DOMAIN_MIPI>;
+						power-domains = <&pgc_dispmix>;
+					};
+				};
+			};
 		};
 
 		aips2: bus@30400000 {
@@ -989,6 +1038,34 @@
 			#size-cells = <1>;
 			ranges;
 
+			disp_blk_ctrl: blk-ctrl@32e28000 {
+				compatible = "fsl,imx8mn-disp-blk-ctrl", "syscon";
+				reg = <0x32e28000 0x100>;
+				power-domains = <&pgc_dispmix>, <&pgc_dispmix>,
+						<&pgc_dispmix>, <&pgc_mipi>,
+						<&pgc_mipi>;
+				power-domain-names = "bus", "isi",
+						     "lcdif", "mipi-dsi",
+						     "mipi-csi";
+				clocks = <&clk IMX8MN_CLK_DISP_AXI>,
+					 <&clk IMX8MN_CLK_DISP_APB>,
+					 <&clk IMX8MN_CLK_DISP_AXI_ROOT>,
+					 <&clk IMX8MN_CLK_DISP_APB_ROOT>,
+					 <&clk IMX8MN_CLK_DISP_AXI_ROOT>,
+					 <&clk IMX8MN_CLK_DISP_APB_ROOT>,
+					 <&clk IMX8MN_CLK_DISP_PIXEL_ROOT>,
+					 <&clk IMX8MN_CLK_DSI_CORE>,
+					 <&clk IMX8MN_CLK_DSI_PHY_REF>,
+					 <&clk IMX8MN_CLK_CSI1_PHY_REF>,
+					 <&clk IMX8MN_CLK_CAMERA_PIXEL_ROOT>;
+				clock-names = "disp_axi", "disp_apb",
+					      "disp_axi_root", "disp_apb_root",
+					      "lcdif-axi", "lcdif-apb", "lcdif-pix",
+					      "dsi-pclk", "dsi-ref",
+					      "csi-aclk", "csi-pclk";
+				#power-domain-cells = <1>;
+			};
+
 			usbotg1: usb@32e40000 {
 				compatible = "fsl,imx8mn-usb", "fsl,imx7d-usb";
 				reg = <0x32e40000 0x200>;
@@ -999,6 +1076,7 @@
 				assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>;
 				phys = <&usbphynop1>;
 				fsl,usbmisc = <&usbmisc1 0>;
+				power-domains = <&pgc_otg1>;
 				status = "disabled";
 			};
 
@@ -1038,6 +1116,32 @@
 			status = "disabled";
 		};
 
+		gpu: gpu@38000000 {
+			compatible = "vivante,gc";
+			reg = <0x38000000 0x8000>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX8MN_CLK_GPU_AHB>,
+				<&clk IMX8MN_CLK_GPU_BUS_ROOT>,
+				<&clk IMX8MN_CLK_GPU_CORE_ROOT>,
+				<&clk IMX8MN_CLK_GPU_SHADER>;
+			clock-names = "reg", "bus", "core", "shader";
+			assigned-clocks = <&clk IMX8MN_CLK_GPU_CORE>,
+					  <&clk IMX8MN_CLK_GPU_SHADER>,
+					  <&clk IMX8MN_CLK_GPU_AXI>,
+					  <&clk IMX8MN_CLK_GPU_AHB>,
+					  <&clk IMX8MN_GPU_PLL>;
+			assigned-clock-parents = <&clk IMX8MN_GPU_PLL_OUT>,
+						  <&clk IMX8MN_GPU_PLL_OUT>,
+						  <&clk IMX8MN_SYS_PLL1_800M>,
+						  <&clk IMX8MN_SYS_PLL1_800M>;
+			assigned-clock-rates = <400000000>,
+					       <400000000>,
+					       <800000000>,
+					       <400000000>,
+					       <1200000000>;
+			power-domains = <&pgc_gpumix>;
+		};
+
 		gic: interrupt-controller@38800000 {
 			compatible = "arm,gic-v3";
 			reg = <0x38800000 0x10000>,
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index 2eb943210678..4c3ac4214a2c 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -294,9 +294,46 @@
 		reg = <0x20>;
 		gpio-controller;
 		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pca6416_int>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+		gpio-line-names = "EXT_PWREN1",
+			"EXT_PWREN2",
+			"CAN1/I2C5_SEL",
+			"PDM/CAN2_SEL",
+			"FAN_EN",
+			"PWR_MEAS_IO1",
+			"PWR_MEAS_IO2",
+			"EXP_P0_7",
+			"EXP_P1_0",
+			"EXP_P1_1",
+			"EXP_P1_2",
+			"EXP_P1_3",
+			"EXP_P1_4",
+			"EXP_P1_5",
+			"EXP_P1_6",
+			"EXP_P1_7";
 	};
 };
 
+/* I2C on expansion connector J22. */
+&i2c5 {
+	clock-frequency = <100000>; /* Lower clock speed for external bus. */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c5>;
+	status = "disabled"; /* can1 pins conflict with i2c5 */
+
+	/* GPIO 2 of PCA6416 is used to switch between CAN1 and I2C5 functions:
+	 *     LOW:  CAN1 (default, pull-down)
+	 *     HIGH: I2C5
+	 * You need to set it to high to enable I2C5 (for example, add gpio-hog
+	 * in pca6416 node).
+	 */
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };
@@ -442,12 +479,25 @@
 		>;
 	};
 
+	pinctrl_i2c5: i2c5grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_RX__I2C5_SDA         0x400001c3
+			MX8MP_IOMUXC_SPDIF_TX__I2C5_SCL         0x400001c3
+		>;
+	};
+
 	pinctrl_pmic: pmicgrp {
 		fsl,pins = <
 			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03	0x000001c0
 		>;
 	};
 
+	pinctrl_pca6416_int: pca6416_int_grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12	0x146 /* Input pull-up. */
+		>;
+	};
+
 	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
 		fsl,pins = <
 			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x41
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
index fc178eebf8aa..79b290a002c1 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
@@ -60,6 +60,7 @@
 			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
 			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+			ti,min-output-impedance;
 			enet-phy-lane-no-swap;
 		};
 	};
@@ -113,6 +114,8 @@
 				regulator-boot-on;
 				regulator-always-on;
 				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
 			};
 
 			buck4: BUCK4 {
@@ -167,14 +170,14 @@
 				regulator-compatible = "LDO4";
 				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-				regulator-always-on;
 			};
 
 			ldo5: LDO5 {
 				regulator-compatible = "LDO5";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
 			};
 		};
 	};
@@ -194,6 +197,8 @@
 
 /* eMMC */
 &usdhc3 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC3_ROOT>;
+	assigned-clock-rates = <400000000>;
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
@@ -221,12 +226,12 @@
 			MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3		0x91
 			MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC		0x91
 			MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x91
-			MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0		0x1f
-			MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1		0x1f
-			MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2		0x1f
-			MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3		0x1f
-			MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x1f
-			MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC		0x1f
+			MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0		0x12
+			MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1		0x12
+			MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2		0x14
+			MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3		0x14
+			MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x14
+			MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC		0x14
 			MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15		0x11
 		>;
 	};
@@ -298,21 +303,21 @@
 		fsl,pins = <
 			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x196
 			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d6
-			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d6
-			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d6
-			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d6
-			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d6
-			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d6
-			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d6
-			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d6
-			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d6
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d2
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d2
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d2
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d2
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d2
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d2
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d2
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d2
 			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x196
 		>;
 	};
 
 	pinctrl_wdog: wdoggrp {
 		fsl,pins = <
-			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B	0xc6
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B	0xe6
 		>;
 	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index 6b840c05dd77..3f8703f3ba5b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -958,6 +958,7 @@
 			assigned-clocks = <&clk IMX8MP_CLK_USB_PHY_REF>;
 			assigned-clock-parents = <&clk IMX8MP_CLK_24M>;
 			#phy-cells = <0>;
+			status = "disabled";
 		};
 
 		usb3_1: usb@32f10108 {
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
index a1b7582f3ecf..99fed35168eb 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
@@ -27,6 +27,17 @@
 		clock-frequency = <100000000>;
 	};
 
+	reg_pcie1: regulator-pcie {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcie1_reg>;
+		regulator-name = "MPCIE_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	reg_usdhc2_vmmc: regulator-vsd-3v3 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_reg_usdhc2>;
@@ -123,6 +134,7 @@
 
 &ddrc {
 	operating-points-v2 = <&ddrc_opp_table>;
+	status = "okay";
 
 	ddrc_opp_table: opp-table {
 		compatible = "operating-points-v2";
@@ -327,6 +339,20 @@
 	status = "okay";
 };
 
+&pcie1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie1>;
+	reset-gpio = <&gpio5 12 GPIO_ACTIVE_LOW>;
+	clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
+		 <&clk IMX8MQ_CLK_PCIE2_AUX>,
+		 <&clk IMX8MQ_CLK_PCIE2_PHY>,
+		 <&pcie0_refclk>;
+	clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
+	vpcie-supply = <&reg_pcie1>;
+	vph-supply = <&vgen5_reg>;
+	status = "okay";
+};
+
 &pgc_gpu {
 	power-supply = <&sw1a_reg>;
 };
@@ -482,6 +508,19 @@
 		>;
 	};
 
+	pinctrl_pcie1: pcie1grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C4_SDA_PCIE2_CLKREQ_B		0x76
+			MX8MQ_IOMUXC_ECSPI2_MISO_GPIO5_IO12		0x16
+		>;
+	};
+
+	pinctrl_pcie1_reg: pcie1reggrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_ECSPI2_SCLK_GPIO5_IO10		0x16
+		>;
+	};
+
 	pinctrl_qspi: qspigrp {
 		fsl,pins = <
 			MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK	0x82
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
index f3e3418f7edc..05c16376b4d8 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
@@ -278,6 +278,7 @@
 
 &ddrc {
 	operating-points-v2 = <&ddrc_opp_table>;
+	status = "okay";
 
 	ddrc_opp_table: opp-table {
 		compatible = "operating-points-v2";
@@ -1115,8 +1116,8 @@
 	status = "okay";
 
 	ports {
-		port@1 {
-			reg = <1>;
+		port@0 {
+			reg = <0>;
 
 			mipi1_sensor_ep: endpoint {
 				remote-endpoint = <&camera1_ep>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts b/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts
index fa721a13de20..94a13cb500e6 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts
@@ -14,6 +14,30 @@
 	compatible = "mntre,reform2", "boundary,imx8mq-nitrogen8m-som", "fsl,imx8mq";
 	chassis-type = "laptop";
 
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		pwms = <&pwm2 0 10000>;
+		power-supply = <&reg_main_usb>;
+		enable-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		brightness-levels = <0 32 64 128 160 200 255>;
+		default-brightness-level = <6>;
+	};
+
+	panel {
+		compatible = "innolux,n125hce-gn1", "simple-panel";
+		power-supply = <&reg_main_3v3>;
+		backlight = <&backlight>;
+		no-hpd;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&edp_bridge_out>;
+			};
+		};
+	};
+
 	pcie1_refclk: clock-pcie1-refclk {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -42,6 +66,22 @@
 		vin-supply = <&reg_main_5v>;
 	};
 
+	reg_main_1v8: regulator-main-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&reg_main_3v3>;
+	};
+
+	reg_main_1v2: regulator-main-1v2 {
+		compatible = "regulator-fixed";
+		regulator-name = "1V2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&reg_main_5v>;
+	};
+
 	sound {
 		compatible = "fsl,imx-audio-wm8960";
 		audio-cpu = <&sai2>;
@@ -61,6 +101,13 @@
 	};
 };
 
+&dphy {
+	assigned-clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>;
+	assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_800M>;
+	assigned-clock-rates = <25000000>;
+	status = "okay";
+};
+
 &fec1 {
 	status = "okay";
 };
@@ -84,6 +131,67 @@
 	};
 };
 
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	edp_bridge: bridge@2c {
+		compatible = "ti,sn65dsi86";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_edp_bridge>;
+		reg = <0x2c>;
+		enable-gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+		vccio-supply = <&reg_main_1v8>;
+		vpll-supply = <&reg_main_1v8>;
+		vcca-supply = <&reg_main_1v2>;
+		vcc-supply = <&reg_main_1v2>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				edp_bridge_in: endpoint {
+					remote-endpoint = <&mipi_dsi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				edp_bridge_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+	};
+};
+
+&lcdif {
+	assigned-clocks = <&clk IMX8MQ_CLK_LCDIF_PIXEL>;
+	assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_800M>;
+	/delete-property/assigned-clock-rates;
+	status = "okay";
+};
+
+&mipi_dsi {
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			mipi_dsi_out: endpoint {
+				remote-endpoint = <&edp_bridge_in>;
+			};
+		};
+	};
+};
+
 &pcie1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie1>;
@@ -96,6 +204,13 @@
 	status = "okay";
 };
 
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+
 &reg_1p8v {
 	vin-supply = <&reg_main_5v>;
 };
@@ -169,10 +284,29 @@
 };
 
 &iomuxc {
+	pinctrl_backlight: backlightgrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x3
+		>;
+	};
+
+	pinctrl_edp_bridge: edpbridgegrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20		0x1
+		>;
+	};
+
 	pinctrl_i2c3: i2c3grp {
 		fsl,pins = <
-			MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL			0x4000007f
-			MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA			0x4000007f
+			MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL			0x40000022
+			MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA			0x40000022
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_I2C4_SCL_I2C4_SCL			0x40000022
+			MX8MQ_IOMUXC_I2C4_SDA_I2C4_SDA			0x40000022
 		>;
 	};
 
@@ -182,6 +316,12 @@
 		>;
 	};
 
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_SPDIF_RX_PWM2_OUT			0x3
+		>;
+	};
+
 	pinctrl_sai2: sai2grp {
 		fsl,pins = <
 			MX8MQ_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0		0xd6
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi
index 8aedcddfeab8..38ffcd145b33 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi
@@ -272,10 +272,6 @@
 	status = "okay";
 };
 
-&vpu {
-	status = "okay";
-};
-
 /* Attention: wdog reset forcing POR needs baseboard support */
 &wdog1 {
 	status = "okay";
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 2df2510d0118..5b3e849f554d 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -554,7 +554,7 @@
 				assigned-clock-rates = <0>, <0>, <0>, <594000000>;
 				status = "disabled";
 
-				port@0 {
+				port {
 					lcdif_mipi_dsi: endpoint {
 						remote-endpoint = <&mipi_dsi_lcdif_in>;
 					};
@@ -737,7 +737,21 @@
 					pgc_vpu: power-domain@6 {
 						#power-domain-cells = <0>;
 						reg = <IMX8M_POWER_DOMAIN_VPU>;
-						clocks = <&clk IMX8MQ_CLK_VPU_DEC_ROOT>;
+						clocks = <&clk IMX8MQ_CLK_VPU_DEC_ROOT>,
+							 <&clk IMX8MQ_CLK_VPU_G1_ROOT>,
+							 <&clk IMX8MQ_CLK_VPU_G2_ROOT>;
+						assigned-clocks = <&clk IMX8MQ_CLK_VPU_G1>,
+								  <&clk IMX8MQ_CLK_VPU_G2>,
+								  <&clk IMX8MQ_CLK_VPU_BUS>,
+								  <&clk IMX8MQ_VPU_PLL_BYPASS>;
+						assigned-clock-parents = <&clk IMX8MQ_VPU_PLL_OUT>,
+									 <&clk IMX8MQ_VPU_PLL_OUT>,
+									 <&clk IMX8MQ_SYS1_PLL_800M>,
+									 <&clk IMX8MQ_VPU_PLL>;
+						assigned-clock-rates = <600000000>,
+								       <600000000>,
+								       <800000000>,
+								       <0>;
 					};
 
 					pgc_disp: power-domain@7 {
@@ -1151,8 +1165,8 @@
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					port@0 {
-						reg = <0>;
+					port@1 {
+						reg = <1>;
 
 						csi1_mipi_ep: endpoint {
 							remote-endpoint = <&csi1_ep>;
@@ -1203,8 +1217,8 @@
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					port@0 {
-						reg = <0>;
+					port@1 {
+						reg = <1>;
 
 						csi2_mipi_ep: endpoint {
 							remote-endpoint = <&csi2_ep>;
@@ -1457,30 +1471,31 @@
 			status = "disabled";
 		};
 
-		vpu: video-codec@38300000 {
-			compatible = "nxp,imx8mq-vpu";
-			reg = <0x38300000 0x10000>,
-			      <0x38310000 0x10000>,
-			      <0x38320000 0x10000>;
-			reg-names = "g1", "g2", "ctrl";
-			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "g1", "g2";
+		vpu_g1: video-codec@38300000 {
+			compatible = "nxp,imx8mq-vpu-g1";
+			reg = <0x38300000 0x10000>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>;
+			power-domains = <&vpu_blk_ctrl IMX8MQ_VPUBLK_PD_G1>;
+		};
+
+		vpu_g2: video-codec@38310000 {
+			compatible = "nxp,imx8mq-vpu-g2";
+			reg = <0x38310000 0x10000>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX8MQ_CLK_VPU_G2_ROOT>;
+			power-domains = <&vpu_blk_ctrl IMX8MQ_VPUBLK_PD_G2>;
+		};
+
+		vpu_blk_ctrl: blk-ctrl@38320000 {
+			compatible = "fsl,imx8mq-vpu-blk-ctrl";
+			reg = <0x38320000 0x100>;
+			power-domains = <&pgc_vpu>, <&pgc_vpu>, <&pgc_vpu>;
+			power-domain-names = "bus", "g1", "g2";
 			clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>,
-				 <&clk IMX8MQ_CLK_VPU_G2_ROOT>,
-				 <&clk IMX8MQ_CLK_VPU_DEC_ROOT>;
-			clock-names = "g1", "g2", "bus";
-			assigned-clocks = <&clk IMX8MQ_CLK_VPU_G1>,
-					  <&clk IMX8MQ_CLK_VPU_G2>,
-					  <&clk IMX8MQ_CLK_VPU_BUS>,
-					  <&clk IMX8MQ_VPU_PLL_BYPASS>;
-			assigned-clock-parents = <&clk IMX8MQ_VPU_PLL_OUT>,
-						 <&clk IMX8MQ_VPU_PLL_OUT>,
-						 <&clk IMX8MQ_SYS1_PLL_800M>,
-						 <&clk IMX8MQ_VPU_PLL>;
-			assigned-clock-rates = <600000000>, <600000000>,
-					       <800000000>, <0>;
-			power-domains = <&pgc_vpu>;
+				 <&clk IMX8MQ_CLK_VPU_G2_ROOT>;
+			clock-names = "g1", "g2";
+			#power-domain-cells = <1>;
 		};
 
 		pcie0: pcie@33800000 {
@@ -1579,6 +1594,7 @@
 				 <&clk IMX8MQ_DRAM_PLL_OUT>,
 				 <&clk IMX8MQ_CLK_DRAM_ALT>,
 				 <&clk IMX8MQ_CLK_DRAM_APB>;
+			status = "disabled";
 		};
 
 		ddr-pmu@3d800000 {
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi
index 42637a45701c..ec1639174e2e 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi
@@ -19,3 +19,7 @@
 &usdhc2 {
 	compatible = "fsl,imx8qm-usdhc", "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
 };
+
+&usdhc3 {
+	compatible = "fsl,imx8qm-usdhc", "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-lsio.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-lsio.dtsi
index 30896610c654..669aa14ce9f7 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-ss-lsio.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-lsio.dtsi
@@ -56,6 +56,14 @@
 	compatible = "fsl,imx8-mu-scu", "fsl,imx8qm-mu", "fsl,imx6sx-mu";
 };
 
+&lsio_mu5 {
+	compatible = "fsl,imx8qm-mu", "fsl,imx6sx-mu";
+};
+
+&lsio_mu6 {
+	compatible = "fsl,imx8qm-mu", "fsl,imx6sx-mu";
+};
+
 &lsio_mu13 {
 	compatible = "fsl,imx8qm-mu", "fsl,imx6sx-mu";
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
index 4a7c017b5f31..be8c76a0554c 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
@@ -20,6 +20,9 @@
 		mmc1 = &usdhc2;
 		mmc2 = &usdhc3;
 		serial0 = &lpuart0;
+		serial1 = &lpuart1;
+		serial2 = &lpuart2;
+		serial3 = &lpuart3;
 	};
 
 	cpus {
@@ -54,7 +57,7 @@
 
 		A53_0: cpu@0 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a53", "arm,armv8";
+			compatible = "arm,cortex-a53";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -68,7 +71,7 @@
 
 		A53_1: cpu@1 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a53", "arm,armv8";
+			compatible = "arm,cortex-a53";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -82,7 +85,7 @@
 
 		A53_2: cpu@2 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a53", "arm,armv8";
+			compatible = "arm,cortex-a53";
 			reg = <0x0 0x2>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -96,7 +99,7 @@
 
 		A53_3: cpu@3 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a53", "arm,armv8";
+			compatible = "arm,cortex-a53";
 			reg = <0x0 0x3>;
 			enable-method = "psci";
 			i-cache-size = <0x8000>;
@@ -110,7 +113,7 @@
 
 		A72_0: cpu@100 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a72", "arm,armv8";
+			compatible = "arm,cortex-a72";
 			reg = <0x0 0x100>;
 			enable-method = "psci";
 			i-cache-size = <0xC000>;
@@ -124,7 +127,7 @@
 
 		A72_1: cpu@101 {
 			device_type = "cpu";
-			compatible = "arm,cortex-a72", "arm,armv8";
+			compatible = "arm,cortex-a72";
 			reg = <0x0 0x101>;
 			enable-method = "psci";
 			next-level-cache = <&A72_L2>;
@@ -201,6 +204,9 @@
 			compatible = "fsl,imx8qm-iomuxc";
 		};
 
+		rtc: rtc {
+			compatible = "fsl,imx8qxp-sc-rtc";
+		};
 	};
 
 	/* sorted in register address */
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-adma.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-adma.dtsi
index dc1daa8dc72f..7bae516004bf 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-ss-adma.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-adma.dtsi
@@ -5,19 +5,19 @@
  */
 
 &lpuart0 {
-	compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
+	compatible = "fsl,imx8qxp-lpuart";
 };
 
 &lpuart1 {
-	compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
+	compatible = "fsl,imx8qxp-lpuart";
 };
 
 &lpuart2 {
-	compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
+	compatible = "fsl,imx8qxp-lpuart";
 };
 
 &lpuart3 {
-	compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
+	compatible = "fsl,imx8qxp-lpuart";
 };
 
 &i2c0 {
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-lsio.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-lsio.dtsi
index 11395479ffc0..8e2152c6eb88 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-ss-lsio.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-lsio.dtsi
@@ -56,6 +56,14 @@
 	compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
 };
 
+&lsio_mu5 {
+	compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+};
+
+&lsio_mu6 {
+	compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
+};
+
 &lsio_mu13 {
 	compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
index a987ff7156bd..09f7364dd1d0 100644
--- a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
@@ -132,7 +132,7 @@
 
 			scmi_sensor: protocol@15 {
 				reg = <0x15>;
-				#thermal-sensor-cells = <0>;
+				#thermal-sensor-cells = <1>;
 			};
 		};
 	};
diff --git a/arch/arm64/boot/dts/freescale/mba8mx.dtsi b/arch/arm64/boot/dts/freescale/mba8mx.dtsi
index f27e3c8de916..c2f0f1a1566c 100644
--- a/arch/arm64/boot/dts/freescale/mba8mx.dtsi
+++ b/arch/arm64/boot/dts/freescale/mba8mx.dtsi
@@ -66,6 +66,12 @@
 		};
 	};
 
+	pcie0_refclk: pcie0-refclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
 	reg_hub_vbus: regulator-hub-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "MBA8MX_HUB_VBUS";
@@ -91,7 +97,7 @@
 
 	sound {
 		compatible = "fsl,imx-audio-tlv320aic32x4";
-		model = "tqm-tlv320aic32";
+		model = "imx-audio-tlv320aic32x4";
 		ssi-controller = <&sai3>;
 		audio-codec = <&tlv320aic3x04>;
 	};
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
index 0dd2d2ee765a..c78371703e76 100644
--- a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi
@@ -300,7 +300,7 @@
 			status = "disabled";
 		};
 
-		mmc: dwmmc0@ff808000 {
+		mmc: mmc@ff808000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "altr,socfpga-dw-mshc";
@@ -337,7 +337,7 @@
 			reg = <0xffe00000 0x40000>;
 		};
 
-		pdma: pdma@ffda0000 {
+		pdma: dma-controller@ffda0000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0xffda0000 0x1000>;
 			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
@@ -502,7 +502,7 @@
 		};
 
 		usb0: usb@ffb00000 {
-			compatible = "snps,dwc2";
+			compatible = "intel,socfpga-agilex-hsotg", "snps,dwc2";
 			reg = <0xffb00000 0x40000>;
 			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
 			phys = <&usbphy0>;
@@ -510,12 +510,13 @@
 			resets = <&rst USB0_RESET>, <&rst USB0_OCP_RESET>;
 			reset-names = "dwc2", "dwc2-ecc";
 			clocks = <&clkmgr AGILEX_USB_CLK>;
+			clock-names = "otg";
 			iommus = <&smmu 6>;
 			status = "disabled";
 		};
 
 		usb1: usb@ffb40000 {
-			compatible = "snps,dwc2";
+			compatible = "intel,socfpga-agilex-hsotg", "snps,dwc2";
 			reg = <0xffb40000 0x40000>;
 			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
 			phys = <&usbphy0>;
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts
index 0f7a0ba344be..26cd3c121757 100644
--- a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts
@@ -6,6 +6,7 @@
 
 / {
 	model = "SoCFPGA Agilex SoCDK";
+	compatible = "intel,socfpga-agilex-socdk", "intel,socfpga-agilex";
 
 	aliases {
 		serial0 = &uart0;
@@ -20,17 +21,17 @@
 
 	leds {
 		compatible = "gpio-leds";
-		hps0 {
+		led0 {
 			label = "hps_led0";
 			gpios = <&portb 20 GPIO_ACTIVE_HIGH>;
 		};
 
-		hps1 {
+		led1 {
 			label = "hps_led1";
 			gpios = <&portb 19 GPIO_ACTIVE_HIGH>;
 		};
 
-		hps2 {
+		led2 {
 			label = "hps_led2";
 			gpios = <&portb 21 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk_nand.dts b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk_nand.dts
index 57f83481f551..51f83f96ec65 100644
--- a/arch/arm64/boot/dts/intel/socfpga_agilex_socdk_nand.dts
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex_socdk_nand.dts
@@ -6,6 +6,7 @@
 
 / {
 	model = "SoCFPGA Agilex SoCDK";
+	compatible = "intel,socfpga-agilex-socdk", "intel,socfpga-agilex";
 
 	aliases {
 		serial0 = &uart0;
diff --git a/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts
index f3c1310dae0a..62c66e52b656 100644
--- a/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts
+++ b/arch/arm64/boot/dts/intel/socfpga_n5x_socdk.dts
@@ -6,6 +6,7 @@
 
 / {
 	model = "eASIC N5X SoCDK";
+	compatible = "intel,n5x-socdk", "intel,socfpga-agilex";
 
 	aliases {
 		serial0 = &uart0;
@@ -23,6 +24,15 @@
 		/* We expect the bootloader to fill in the reg */
 		reg = <0 0 0 0>;
 	};
+
+	soc {
+		sdram_edac: memory-controller@f87f8000 {
+			compatible = "snps,ddrc-3.80a";
+			reg = <0xf87f8000 0x400>;
+			interrupts = <0 175 4>;
+			status = "okay";
+		};
+	};
 };
 
 &clkmgr {
diff --git a/arch/arm64/boot/dts/lg/lg1312.dtsi b/arch/arm64/boot/dts/lg/lg1312.dtsi
index 081fe7a9f605..bec97480a960 100644
--- a/arch/arm64/boot/dts/lg/lg1312.dtsi
+++ b/arch/arm64/boot/dts/lg/lg1312.dtsi
@@ -182,12 +182,13 @@
 			clocks = <&clk_bus>;
 			clock-names = "apb_pclk";
 		};
-		dmac0: dma@c1128000 {
+		dmac0: dma-controller@c1128000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x0 0xc1128000 0x1000>;
 			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk_bus>;
 			clock-names = "apb_pclk";
+			#dma-cells = <1>;
 		};
 		gpio0: gpio@fd400000 {
 			#gpio-cells = <2>;
diff --git a/arch/arm64/boot/dts/lg/lg1313.dtsi b/arch/arm64/boot/dts/lg/lg1313.dtsi
index 604bb6975337..ada3d4dc6305 100644
--- a/arch/arm64/boot/dts/lg/lg1313.dtsi
+++ b/arch/arm64/boot/dts/lg/lg1313.dtsi
@@ -182,12 +182,13 @@
 			clocks = <&clk_bus>;
 			clock-names = "apb_pclk";
 		};
-		dmac0: dma@c1128000 {
+		dmac0: dma-controller@c1128000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x0 0xc1128000 0x1000>;
 			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk_bus>;
 			clock-names = "apb_pclk";
+			#dma-cells = <1>;
 		};
 		gpio0: gpio@fd400000 {
 			#gpio-cells = <2>;
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
index 04da07ae4420..1cee26479bfe 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
@@ -18,6 +18,7 @@
 
 	aliases {
 		spi0 = &spi0;
+		ethernet0 = &eth0;
 		ethernet1 = &eth1;
 		mmc0 = &sdhci0;
 		mmc1 = &sdhci1;
@@ -138,7 +139,9 @@
 	/*
 	 * U-Boot port for Turris Mox has a bug which always expects that "ranges" DT property
 	 * contains exactly 2 ranges with 3 (child) address cells, 2 (parent) address cells and
-	 * 2 size cells and also expects that the second range starts at 16 MB offset. If these
+	 * 2 size cells and also expects that the second range starts at 16 MB offset. Also it
+	 * expects that first range uses same address for PCI (child) and CPU (parent) cells (so
+	 * no remapping) and that this address is the lowest from all specified ranges. If these
 	 * conditions are not met then U-Boot crashes during loading kernel DTB file. PCIe address
 	 * space is 128 MB long, so the best split between MEM and IO is to use fixed 16 MB window
 	 * for IO and the rest 112 MB (64+32+16) for MEM, despite that maximal IO size is just 64 kB.
@@ -147,6 +150,9 @@
 	 * https://source.denx.de/u-boot/u-boot/-/commit/cb2ddb291ee6fcbddd6d8f4ff49089dfe580f5d7
 	 * https://source.denx.de/u-boot/u-boot/-/commit/c64ac3b3185aeb3846297ad7391fc6df8ecd73bf
 	 * https://source.denx.de/u-boot/u-boot/-/commit/4a82fca8e330157081fc132a591ebd99ba02ee33
+	 * Bug related to requirement of same child and parent addresses for first range is fixed
+	 * in U-Boot version 2022.04 by following commit:
+	 * https://source.denx.de/u-boot/u-boot/-/commit/1fd54253bca7d43d046bba4853fe5fafd034bc17
 	 */
 	#address-cells = <3>;
 	#size-cells = <2>;
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index 673f4906eef9..30233de58bb3 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -489,6 +489,7 @@
 			bus-range = <0x00 0xff>;
 			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 			#interrupt-cells = <1>;
+			clocks = <&sb_periph_clk 13>;
 			msi-parent = <&pcie0>;
 			msi-controller;
 			/*
@@ -499,7 +500,7 @@
 			 * (totaling 127 MiB) for MEM.
 			 */
 			ranges = <0x82000000 0 0xe8000000   0 0xe8000000   0 0x07f00000   /* Port 0 MEM */
-				  0x81000000 0 0xefff0000   0 0xefff0000   0 0x00010000>; /* Port 0 IO */
+				  0x81000000 0 0x00000000   0 0xefff0000   0 0x00010000>; /* Port 0 IO */
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0 0 0 1 &pcie_intc 0>,
 					<0 0 0 2 &pcie_intc 1>,
diff --git a/arch/arm64/boot/dts/mediatek/mt6358.dtsi b/arch/arm64/boot/dts/mediatek/mt6358.dtsi
index 95145076b7e6..98f3b0e0c9f6 100644
--- a/arch/arm64/boot/dts/mediatek/mt6358.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6358.dtsi
@@ -2,6 +2,7 @@
 /*
  * Copyright (c) 2020 MediaTek Inc.
  */
+#include <dt-bindings/input/input.h>
 
 &pwrap {
 	pmic: mt6358 {
@@ -357,5 +358,16 @@
 		mt6358rtc: mt6358rtc {
 			compatible = "mediatek,mt6358-rtc";
 		};
+
+		mt6358keys: mt6358keys {
+			compatible = "mediatek,mt6358-keys";
+			power {
+				linux,keycodes = <KEY_POWER>;
+				wakeup-source;
+			};
+			home {
+				linux,keycodes = <KEY_HOME>;
+			};
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
index 5cd760abff51..21e420829572 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
@@ -19,7 +19,8 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0 0x40000000 0 0x40000000>;
 	};
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
index b8da76b6ba47..694acf8f5b70 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
@@ -6,16 +6,18 @@
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/mt7986-clk.h>
 
 / {
 	interrupt-parent = <&gic>;
 	#address-cells = <2>;
 	#size-cells = <2>;
 
-	system_clk: dummy40m {
+	clk40m: oscillator@0 {
 		compatible = "fixed-clock";
 		clock-frequency = <40000000>;
 		#clock-cells = <0>;
+		clock-output-names = "clkxtal";
 	};
 
 	cpus {
@@ -98,6 +100,18 @@
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		infracfg: infracfg@10001000 {
+			compatible = "mediatek,mt7986-infracfg", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		topckgen: topckgen@1001b000 {
+			compatible = "mediatek,mt7986-topckgen", "syscon";
+			reg = <0 0x1001B000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
 		watchdog: watchdog@1001c000 {
 			compatible = "mediatek,mt7986-wdt",
 				     "mediatek,mt6589-wdt";
@@ -107,6 +121,12 @@
 			status = "disabled";
 		};
 
+		apmixedsys: apmixedsys@1001e000 {
+			compatible = "mediatek,mt7986-apmixedsys";
+			reg = <0 0x1001E000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
 		pio: pinctrl@1001f000 {
 			compatible = "mediatek,mt7986a-pinctrl";
 			reg = <0 0x1001f000 0 0x1000>,
@@ -128,11 +148,25 @@
 			#interrupt-cells = <2>;
 		};
 
+		sgmiisys0: syscon@10060000 {
+			compatible = "mediatek,mt7986-sgmiisys_0",
+				     "syscon";
+			reg = <0 0x10060000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		sgmiisys1: syscon@10070000 {
+			compatible = "mediatek,mt7986-sgmiisys_1",
+				     "syscon";
+			reg = <0 0x10070000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
 		trng: trng@1020f000 {
 			compatible = "mediatek,mt7986-rng",
 				     "mediatek,mt7623-rng";
 			reg = <0 0x1020f000 0 0x100>;
-			clocks = <&system_clk>;
+			clocks = <&infracfg CLK_INFRA_TRNG_CK>;
 			clock-names = "rng";
 			status = "disabled";
 		};
@@ -142,7 +176,13 @@
 				     "mediatek,mt6577-uart";
 			reg = <0 0x11002000 0 0x400>;
 			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&system_clk>;
+			clocks = <&infracfg CLK_INFRA_UART0_SEL>,
+				 <&infracfg CLK_INFRA_UART0_CK>;
+			clock-names = "baud", "bus";
+			assigned-clocks = <&topckgen CLK_TOP_UART_SEL>,
+					  <&infracfg CLK_INFRA_UART0_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_XTAL>,
+						 <&topckgen CLK_TOP_UART_SEL>;
 			status = "disabled";
 		};
 
@@ -151,7 +191,11 @@
 				     "mediatek,mt6577-uart";
 			reg = <0 0x11003000 0 0x400>;
 			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&system_clk>;
+			clocks = <&infracfg CLK_INFRA_UART1_SEL>,
+				 <&infracfg CLK_INFRA_UART1_CK>;
+			clock-names = "baud", "bus";
+			assigned-clocks = <&infracfg CLK_INFRA_UART1_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_F26M_SEL>;
 			status = "disabled";
 		};
 
@@ -160,10 +204,24 @@
 				     "mediatek,mt6577-uart";
 			reg = <0 0x11004000 0 0x400>;
 			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&system_clk>;
+			clocks = <&infracfg CLK_INFRA_UART2_SEL>,
+				 <&infracfg CLK_INFRA_UART2_CK>;
+			clock-names = "baud", "bus";
+			assigned-clocks = <&infracfg CLK_INFRA_UART2_SEL>;
+			assigned-clock-parents = <&topckgen CLK_TOP_F26M_SEL>;
 			status = "disabled";
 		};
 
+		ethsys: syscon@15000000 {
+			 #address-cells = <1>;
+			 #size-cells = <1>;
+			 compatible = "mediatek,mt7986-ethsys",
+				      "syscon";
+			 reg = <0 0x15000000 0 0x1000>;
+			 #clock-cells = <1>;
+			 #reset-cells = <1>;
+		};
+
 	};
 
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
index 5fb752edd754..d73467ea3641 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
@@ -19,7 +19,8 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0 0x40000000 0 0x40000000>;
 	};
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 00f2ddd245e1..4b08691ed39e 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -1594,6 +1594,18 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_VENC>;
 		};
 
+		venc_jpg: venc_jpg@17030000 {
+			compatible = "mediatek,mt8183-jpgenc", "mediatek,mtk-jpgenc";
+			reg = <0 0x17030000 0 0x1000>;
+			interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_LOW>;
+			mediatek,larb = <&larb4>;
+			iommus = <&iommu M4U_PORT_JPGENC_RDMA>,
+				 <&iommu M4U_PORT_JPGENC_BSDMA>;
+			power-domains = <&spm MT8183_POWER_DOMAIN_VENC>;
+			clocks = <&vencsys CLK_VENC_JPGENC>;
+			clock-names = "jpgenc";
+		};
+
 		ipu_conn: syscon@19000000 {
 			compatible = "mediatek,mt8183-ipu_conn", "syscon";
 			reg = <0 0x19000000 0 0x1000>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
index 53d790c335f9..411feb294613 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
@@ -9,6 +9,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/mt8192-pinfunc.h>
+#include <dt-bindings/power/mt8192-power.h>
 
 / {
 	compatible = "mediatek,mt8192";
@@ -301,6 +302,212 @@
 			#interrupt-cells = <2>;
 		};
 
+		scpsys: syscon@10006000 {
+			compatible = "syscon", "simple-mfd";
+			reg = <0 0x10006000 0 0x1000>;
+			#power-domain-cells = <1>;
+
+			/* System Power Manager */
+			spm: power-controller {
+				compatible = "mediatek,mt8192-power-controller";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#power-domain-cells = <1>;
+
+				/* power domain of the SoC */
+				power-domain@MT8192_POWER_DOMAIN_AUDIO {
+					reg = <MT8192_POWER_DOMAIN_AUDIO>;
+					clocks = <&topckgen CLK_TOP_AUD_INTBUS_SEL>,
+						 <&infracfg CLK_INFRA_AUDIO_26M_B>,
+						 <&infracfg CLK_INFRA_AUDIO>;
+					clock-names = "audio", "audio1", "audio2";
+					mediatek,infracfg = <&infracfg>;
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@MT8192_POWER_DOMAIN_CONN {
+					reg = <MT8192_POWER_DOMAIN_CONN>;
+					clocks = <&infracfg CLK_INFRA_PMIC_CONN>;
+					clock-names = "conn";
+					mediatek,infracfg = <&infracfg>;
+					#power-domain-cells = <0>;
+				};
+
+				power-domain@MT8192_POWER_DOMAIN_MFG0 {
+					reg = <MT8192_POWER_DOMAIN_MFG0>;
+					clocks = <&topckgen CLK_TOP_MFG_PLL_SEL>;
+					clock-names = "mfg";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <1>;
+
+					power-domain@MT8192_POWER_DOMAIN_MFG1 {
+						reg = <MT8192_POWER_DOMAIN_MFG1>;
+						mediatek,infracfg = <&infracfg>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#power-domain-cells = <1>;
+
+						power-domain@MT8192_POWER_DOMAIN_MFG2 {
+							reg = <MT8192_POWER_DOMAIN_MFG2>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8192_POWER_DOMAIN_MFG3 {
+							reg = <MT8192_POWER_DOMAIN_MFG3>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8192_POWER_DOMAIN_MFG4 {
+							reg = <MT8192_POWER_DOMAIN_MFG4>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8192_POWER_DOMAIN_MFG5 {
+							reg = <MT8192_POWER_DOMAIN_MFG5>;
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8192_POWER_DOMAIN_MFG6 {
+							reg = <MT8192_POWER_DOMAIN_MFG6>;
+							#power-domain-cells = <0>;
+						};
+					};
+				};
+
+				power-domain@MT8192_POWER_DOMAIN_DISP {
+					reg = <MT8192_POWER_DOMAIN_DISP>;
+					clocks = <&topckgen CLK_TOP_DISP_SEL>,
+						 <&mmsys CLK_MM_SMI_INFRA>,
+						 <&mmsys CLK_MM_SMI_COMMON>,
+						 <&mmsys CLK_MM_SMI_GALS>,
+						 <&mmsys CLK_MM_SMI_IOMMU>;
+					clock-names = "disp", "disp-0", "disp-1", "disp-2",
+						      "disp-3";
+					mediatek,infracfg = <&infracfg>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#power-domain-cells = <1>;
+
+					power-domain@MT8192_POWER_DOMAIN_IPE {
+						reg = <MT8192_POWER_DOMAIN_IPE>;
+						clocks = <&topckgen CLK_TOP_IPE_SEL>,
+							 <&ipesys CLK_IPE_LARB19>,
+							 <&ipesys CLK_IPE_LARB20>,
+							 <&ipesys CLK_IPE_SMI_SUBCOM>,
+							 <&ipesys CLK_IPE_GALS>;
+						clock-names = "ipe", "ipe-0", "ipe-1", "ipe-2",
+							      "ipe-3";
+						mediatek,infracfg = <&infracfg>;
+						#power-domain-cells = <0>;
+					};
+
+					power-domain@MT8192_POWER_DOMAIN_ISP {
+						reg = <MT8192_POWER_DOMAIN_ISP>;
+						clocks = <&topckgen CLK_TOP_IMG1_SEL>,
+							 <&imgsys CLK_IMG_LARB9>,
+							 <&imgsys CLK_IMG_GALS>;
+						clock-names = "isp", "isp-0", "isp-1";
+						mediatek,infracfg = <&infracfg>;
+						#power-domain-cells = <0>;
+					};
+
+					power-domain@MT8192_POWER_DOMAIN_ISP2 {
+						reg = <MT8192_POWER_DOMAIN_ISP2>;
+						clocks = <&topckgen CLK_TOP_IMG2_SEL>,
+							 <&imgsys2 CLK_IMG2_LARB11>,
+							 <&imgsys2 CLK_IMG2_GALS>;
+						clock-names = "isp2", "isp2-0", "isp2-1";
+						mediatek,infracfg = <&infracfg>;
+						#power-domain-cells = <0>;
+					};
+
+					power-domain@MT8192_POWER_DOMAIN_MDP {
+						reg = <MT8192_POWER_DOMAIN_MDP>;
+						clocks = <&topckgen CLK_TOP_MDP_SEL>,
+							 <&mdpsys CLK_MDP_SMI0>;
+						clock-names = "mdp", "mdp-0";
+						mediatek,infracfg = <&infracfg>;
+						#power-domain-cells = <0>;
+					};
+
+					power-domain@MT8192_POWER_DOMAIN_VENC {
+						reg = <MT8192_POWER_DOMAIN_VENC>;
+						clocks = <&topckgen CLK_TOP_VENC_SEL>,
+							 <&vencsys CLK_VENC_SET1_VENC>;
+						clock-names = "venc", "venc-0";
+						mediatek,infracfg = <&infracfg>;
+						#power-domain-cells = <0>;
+					};
+
+					power-domain@MT8192_POWER_DOMAIN_VDEC {
+						reg = <MT8192_POWER_DOMAIN_VDEC>;
+						clocks = <&topckgen CLK_TOP_VDEC_SEL>,
+							 <&vdecsys_soc CLK_VDEC_SOC_VDEC>,
+							 <&vdecsys_soc CLK_VDEC_SOC_LAT>,
+							 <&vdecsys_soc CLK_VDEC_SOC_LARB1>;
+						clock-names = "vdec", "vdec-0", "vdec-1", "vdec-2";
+						mediatek,infracfg = <&infracfg>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#power-domain-cells = <1>;
+
+						power-domain@MT8192_POWER_DOMAIN_VDEC2 {
+							reg = <MT8192_POWER_DOMAIN_VDEC2>;
+							clocks = <&vdecsys CLK_VDEC_VDEC>,
+								 <&vdecsys CLK_VDEC_LAT>,
+								 <&vdecsys CLK_VDEC_LARB1>;
+							clock-names = "vdec2-0", "vdec2-1",
+								      "vdec2-2";
+							#power-domain-cells = <0>;
+						};
+					};
+
+					power-domain@MT8192_POWER_DOMAIN_CAM {
+						reg = <MT8192_POWER_DOMAIN_CAM>;
+						clocks = <&topckgen CLK_TOP_CAM_SEL>,
+							 <&camsys CLK_CAM_LARB13>,
+							 <&camsys CLK_CAM_LARB14>,
+							 <&camsys CLK_CAM_CCU_GALS>,
+							 <&camsys CLK_CAM_CAM2MM_GALS>;
+						clock-names = "cam", "cam-0", "cam-1", "cam-2",
+							      "cam-3";
+						mediatek,infracfg = <&infracfg>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						#power-domain-cells = <1>;
+
+						power-domain@MT8192_POWER_DOMAIN_CAM_RAWA {
+							reg = <MT8192_POWER_DOMAIN_CAM_RAWA>;
+							clocks = <&camsys_rawa CLK_CAM_RAWA_LARBX>;
+							clock-names = "cam_rawa-0";
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8192_POWER_DOMAIN_CAM_RAWB {
+							reg = <MT8192_POWER_DOMAIN_CAM_RAWB>;
+							clocks = <&camsys_rawb CLK_CAM_RAWB_LARBX>;
+							clock-names = "cam_rawb-0";
+							#power-domain-cells = <0>;
+						};
+
+						power-domain@MT8192_POWER_DOMAIN_CAM_RAWC {
+							reg = <MT8192_POWER_DOMAIN_CAM_RAWC>;
+							clocks = <&camsys_rawc CLK_CAM_RAWC_LARBX>;
+							clock-names = "cam_rawc-0";
+							#power-domain-cells = <0>;
+						};
+					};
+				};
+			};
+		};
+
+		watchdog: watchdog@10007000 {
+			compatible = "mediatek,mt8192-wdt";
+			reg = <0 0x10007000 0 0x100>;
+			#reset-cells = <1>;
+		};
+
 		apmixedsys: syscon@1000c000 {
 			compatible = "mediatek,mt8192-apmixedsys", "syscon";
 			reg = <0 0x1000c000 0 0x1000>;
@@ -312,7 +519,7 @@
 				     "mediatek,mt6765-timer";
 			reg = <0 0x10017000 0 0x1000>;
 			interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH 0>;
-			clocks = <&clk26m>;
+			clocks = <&topckgen CLK_TOP_CSW_F26M_D2>;
 			clock-names = "clk13m";
 		};
 
@@ -327,7 +534,7 @@
 				     "mediatek,mt6577-uart";
 			reg = <0 0x11002000 0 0x1000>;
 			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH 0>;
-			clocks = <&clk26m>, <&clk26m>;
+			clocks = <&clk26m>, <&infracfg CLK_INFRA_UART0>;
 			clock-names = "baud", "bus";
 			status = "disabled";
 		};
@@ -337,7 +544,7 @@
 				     "mediatek,mt6577-uart";
 			reg = <0 0x11003000 0 0x1000>;
 			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>;
-			clocks = <&clk26m>, <&clk26m>;
+			clocks = <&clk26m>, <&infracfg CLK_INFRA_UART1>;
 			clock-names = "baud", "bus";
 			status = "disabled";
 		};
@@ -355,9 +562,9 @@
 			#size-cells = <0>;
 			reg = <0 0x1100a000 0 0x1000>;
 			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH 0>;
-			clocks = <&clk26m>,
-				 <&clk26m>,
-				 <&clk26m>;
+			clocks = <&topckgen CLK_TOP_MAINPLL_D5_D4>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&infracfg CLK_INFRA_SPI0>;
 			clock-names = "parent-clk", "sel-clk", "spi-clk";
 			status = "disabled";
 		};
@@ -369,9 +576,9 @@
 			#size-cells = <0>;
 			reg = <0 0x11010000 0 0x1000>;
 			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH 0>;
-			clocks = <&clk26m>,
-				 <&clk26m>,
-				 <&clk26m>;
+			clocks = <&topckgen CLK_TOP_MAINPLL_D5_D4>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&infracfg CLK_INFRA_SPI1>;
 			clock-names = "parent-clk", "sel-clk", "spi-clk";
 			status = "disabled";
 		};
@@ -383,9 +590,9 @@
 			#size-cells = <0>;
 			reg = <0 0x11012000 0 0x1000>;
 			interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH 0>;
-			clocks = <&clk26m>,
-				 <&clk26m>,
-				 <&clk26m>;
+			clocks = <&topckgen CLK_TOP_MAINPLL_D5_D4>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&infracfg CLK_INFRA_SPI2>;
 			clock-names = "parent-clk", "sel-clk", "spi-clk";
 			status = "disabled";
 		};
@@ -397,9 +604,9 @@
 			#size-cells = <0>;
 			reg = <0 0x11013000 0 0x1000>;
 			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH 0>;
-			clocks = <&clk26m>,
-				 <&clk26m>,
-				 <&clk26m>;
+			clocks = <&topckgen CLK_TOP_MAINPLL_D5_D4>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&infracfg CLK_INFRA_SPI3>;
 			clock-names = "parent-clk", "sel-clk", "spi-clk";
 			status = "disabled";
 		};
@@ -411,9 +618,9 @@
 			#size-cells = <0>;
 			reg = <0 0x11018000 0 0x1000>;
 			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH 0>;
-			clocks = <&clk26m>,
-				 <&clk26m>,
-				 <&clk26m>;
+			clocks = <&topckgen CLK_TOP_MAINPLL_D5_D4>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&infracfg CLK_INFRA_SPI4>;
 			clock-names = "parent-clk", "sel-clk", "spi-clk";
 			status = "disabled";
 		};
@@ -425,9 +632,9 @@
 			#size-cells = <0>;
 			reg = <0 0x11019000 0 0x1000>;
 			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH 0>;
-			clocks = <&clk26m>,
-				 <&clk26m>,
-				 <&clk26m>;
+			clocks = <&topckgen CLK_TOP_MAINPLL_D5_D4>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&infracfg CLK_INFRA_SPI5>;
 			clock-names = "parent-clk", "sel-clk", "spi-clk";
 			status = "disabled";
 		};
@@ -439,9 +646,9 @@
 			#size-cells = <0>;
 			reg = <0 0x1101d000 0 0x1000>;
 			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH 0>;
-			clocks = <&clk26m>,
-				 <&clk26m>,
-				 <&clk26m>;
+			clocks = <&topckgen CLK_TOP_MAINPLL_D5_D4>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&infracfg CLK_INFRA_SPI6>;
 			clock-names = "parent-clk", "sel-clk", "spi-clk";
 			status = "disabled";
 		};
@@ -453,9 +660,9 @@
 			#size-cells = <0>;
 			reg = <0 0x1101e000 0 0x1000>;
 			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH 0>;
-			clocks = <&clk26m>,
-				 <&clk26m>,
-				 <&clk26m>;
+			clocks = <&topckgen CLK_TOP_MAINPLL_D5_D4>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&infracfg CLK_INFRA_SPI7>;
 			clock-names = "parent-clk", "sel-clk", "spi-clk";
 			status = "disabled";
 		};
@@ -464,10 +671,12 @@
 			compatible = "mediatek,mt8192-nor";
 			reg = <0 0x11234000 0 0xe0>;
 			interrupts = <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH 0>;
-			clocks = <&clk26m>,
-				 <&clk26m>,
-				 <&clk26m>;
+			clocks = <&topckgen CLK_TOP_SFLASH_SEL>,
+				 <&infracfg CLK_INFRA_FLASHIF_SFLASH>,
+				 <&infracfg CLK_INFRA_FLASHIF_TOP_H_133M>;
 			clock-names = "spi", "sf", "axi";
+			assigned-clocks = <&topckgen CLK_TOP_SFLASH_SEL>;
+			assigned-clock-parents = <&clk26m>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disable";
@@ -484,7 +693,8 @@
 			reg = <0 0x11cb0000 0 0x1000>,
 			      <0 0x10217300 0 0x80>;
 			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH 0>;
-			clocks = <&clk26m>, <&clk26m>;
+			clocks = <&imp_iic_wrap_e CLK_IMP_IIC_WRAP_E_I2C3>,
+				 <&infracfg CLK_INFRA_AP_DMA>;
 			clock-names = "main", "dma";
 			clock-div = <1>;
 			#address-cells = <1>;
@@ -503,7 +713,8 @@
 			reg = <0 0x11d00000 0 0x1000>,
 			      <0 0x10217600 0 0x180>;
 			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH 0>;
-			clocks = <&clk26m>, <&clk26m>;
+			clocks = <&imp_iic_wrap_s CLK_IMP_IIC_WRAP_S_I2C7>,
+				 <&infracfg CLK_INFRA_AP_DMA>;
 			clock-names = "main", "dma";
 			clock-div = <1>;
 			#address-cells = <1>;
@@ -516,7 +727,8 @@
 			reg = <0 0x11d01000 0 0x1000>,
 			      <0 0x10217780 0 0x180>;
 			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH 0>;
-			clocks = <&clk26m>, <&clk26m>;
+			clocks = <&imp_iic_wrap_s CLK_IMP_IIC_WRAP_S_I2C8>,
+				 <&infracfg CLK_INFRA_AP_DMA>;
 			clock-names = "main", "dma";
 			clock-div = <1>;
 			#address-cells = <1>;
@@ -529,7 +741,8 @@
 			reg = <0 0x11d02000 0 0x1000>,
 			      <0 0x10217900 0 0x180>;
 			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH 0>;
-			clocks = <&clk26m>, <&clk26m>;
+			clocks = <&imp_iic_wrap_s CLK_IMP_IIC_WRAP_S_I2C9>,
+				 <&infracfg CLK_INFRA_AP_DMA>;
 			clock-names = "main", "dma";
 			clock-div = <1>;
 			#address-cells = <1>;
@@ -548,7 +761,8 @@
 			reg = <0 0x11d20000 0 0x1000>,
 			      <0 0x10217100 0 0x80>;
 			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH 0>;
-			clocks = <&clk26m>, <&clk26m>;
+			clocks = <&imp_iic_wrap_ws CLK_IMP_IIC_WRAP_WS_I2C1>,
+				 <&infracfg CLK_INFRA_AP_DMA>;
 			clock-names = "main", "dma";
 			clock-div = <1>;
 			#address-cells = <1>;
@@ -561,7 +775,8 @@
 			reg = <0 0x11d21000 0 0x1000>,
 			      <0 0x10217180 0 0x180>;
 			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH 0>;
-			clocks = <&clk26m>, <&clk26m>;
+			clocks = <&imp_iic_wrap_ws CLK_IMP_IIC_WRAP_WS_I2C2>,
+				 <&infracfg CLK_INFRA_AP_DMA>;
 			clock-names = "main", "dma";
 			clock-div = <1>;
 			#address-cells = <1>;
@@ -574,7 +789,8 @@
 			reg = <0 0x11d22000 0 0x1000>,
 			      <0 0x10217380 0 0x180>;
 			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>;
-			clocks = <&clk26m>, <&clk26m>;
+			clocks = <&imp_iic_wrap_ws CLK_IMP_IIC_WRAP_WS_I2C4>,
+				 <&infracfg CLK_INFRA_AP_DMA>;
 			clock-names = "main", "dma";
 			clock-div = <1>;
 			#address-cells = <1>;
@@ -593,7 +809,8 @@
 			reg = <0 0x11e00000 0 0x1000>,
 			      <0 0x10217500 0 0x80>;
 			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH 0>;
-			clocks = <&clk26m>, <&clk26m>;
+			clocks = <&imp_iic_wrap_w CLK_IMP_IIC_WRAP_W_I2C5>,
+				 <&infracfg CLK_INFRA_AP_DMA>;
 			clock-names = "main", "dma";
 			clock-div = <1>;
 			#address-cells = <1>;
@@ -612,7 +829,8 @@
 			reg = <0 0x11f00000 0 0x1000>,
 			      <0 0x10217080 0 0x80>;
 			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH 0>;
-			clocks = <&clk26m>, <&clk26m>;
+			clocks = <&imp_iic_wrap_n CLK_IMP_IIC_WRAP_N_I2C0>,
+				 <&infracfg CLK_INFRA_AP_DMA>;
 			clock-names = "main", "dma";
 			clock-div = <1>;
 			#address-cells = <1>;
@@ -625,7 +843,8 @@
 			reg = <0 0x11f01000 0 0x1000>,
 			      <0 0x10217580 0 0x80>;
 			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH 0>;
-			clocks = <&clk26m>, <&clk26m>;
+			clocks = <&imp_iic_wrap_n CLK_IMP_IIC_WRAP_N_I2C6>,
+				 <&infracfg CLK_INFRA_AP_DMA>;
 			clock-names = "main", "dma";
 			clock-div = <1>;
 			#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/nvidia/Makefile b/arch/arm64/boot/dts/nvidia/Makefile
index ea3f338fd013..bc34c9d8846a 100644
--- a/arch/arm64/boot/dts/nvidia/Makefile
+++ b/arch/arm64/boot/dts/nvidia/Makefile
@@ -1,4 +1,15 @@
 # SPDX-License-Identifier: GPL-2.0
+
+# Enables support for device-tree overlays
+DTC_FLAGS_tegra210-p2371-2180 := -@
+DTC_FLAGS_tegra210-p3450-0000 := -@
+DTC_FLAGS_tegra186-p2771-0000 := -@
+DTC_FLAGS_tegra186-p3509-0000+p3636-0001 := -@
+DTC_FLAGS_tegra194-p2972-0000 := -@
+DTC_FLAGS_tegra194-p3509-0000+p3668-0000 := -@
+DTC_FLAGS_tegra194-p3509-0000+p3668-0001 := -@
+DTC_FLAGS_tegra234-p3737-0000+p3701-0000 := -@
+
 dtb-$(CONFIG_ARCH_TEGRA_132_SOC) += tegra132-norrin.dtb
 dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2371-0000.dtb
 dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2371-2180.dtb
diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
index c91afff1b757..e9b40f5d79ec 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -73,6 +73,48 @@
 		snps,rxpbl = <8>;
 	};
 
+	gpcdma: dma-controller@2600000 {
+		compatible = "nvidia,tegra186-gpcdma";
+		reg = <0x0 0x2600000 0x0 0x210000>;
+		resets = <&bpmp TEGRA186_RESET_GPCDMA>;
+		reset-names = "gpcdma";
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+		#dma-cells = <1>;
+		iommus = <&smmu TEGRA186_SID_GPCDMA_0>;
+		dma-coherent;
+		status = "okay";
+	};
+
 	aconnect@2900000 {
 		compatible = "nvidia,tegra186-aconnect",
 			     "nvidia,tegra210-aconnect";
@@ -1938,14 +1980,14 @@
 	};
 
 	pmu_denver {
-		compatible = "nvidia,denver-pmu", "arm,armv8-pmuv3";
+		compatible = "nvidia,denver-pmu";
 		interrupts = <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-affinity = <&denver_0 &denver_1>;
 	};
 
 	pmu_a57 {
-		compatible = "arm,cortex-a57-pmu", "arm,armv8-pmuv3";
+		compatible = "arm,cortex-a57-pmu";
 		interrupts = <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi
index 1323fa9b8301..32ce7904f44f 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi
@@ -1826,6 +1826,10 @@
 			pads {
 				usb2 {
 					lanes {
+						usb2-0 {
+							status = "okay";
+						};
+
 						usb2-1 {
 							status = "okay";
 						};
@@ -1846,6 +1850,20 @@
 			};
 
 			ports {
+				usb2-0 {
+					mode = "otg";
+					status = "okay";
+					usb-role-switch;
+					connector {
+						compatible = "gpio-usb-b-connector",
+							"usb-b-connector";
+						label = "micro-USB";
+						type = "micro";
+						vbus-gpio = <&gpio TEGRA194_MAIN_GPIO(Z, 1)
+								GPIO_ACTIVE_LOW>;
+					};
+				};
+
 				usb2-1 {
 					mode = "host";
 					status = "okay";
@@ -1874,6 +1892,13 @@
 			phy-names = "usb2-1", "usb2-2", "usb3-2";
 		};
 
+		usb@3550000 {
+			status = "okay";
+
+			phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>;
+			phy-names = "usb2-0";
+		};
+
 		spi@3270000 {
 			status = "okay";
 
diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index 2d48c3715fc6..751ebe5e9506 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -115,6 +115,49 @@
 			snps,rxpbl = <8>;
 		};
 
+		gpcdma: dma-controller@2600000 {
+			compatible = "nvidia,tegra194-gpcdma",
+				     "nvidia,tegra186-gpcdma";
+			reg = <0x2600000 0x210000>;
+			resets = <&bpmp TEGRA194_RESET_GPCDMA>;
+			reset-names = "gpcdma";
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			iommus = <&smmu TEGRA194_SID_GPCDMA_0>;
+			dma-coherent;
+			status = "okay";
+		};
+
 		aconnect@2900000 {
 			compatible = "nvidia,tegra194-aconnect",
 				     "nvidia,tegra210-aconnect";
@@ -243,6 +286,10 @@
 						    "rx19", "tx19",
 						    "rx20", "tx20";
 					status = "disabled";
+					interconnects = <&mc TEGRA194_MEMORY_CLIENT_APEDMAR &emc>,
+							<&mc TEGRA194_MEMORY_CLIENT_APEDMAW &emc>;
+					interconnect-names = "dma-mem", "write";
+					iommus = <&smmu TEGRA194_SID_APE>;
 				};
 
 				tegra_i2s1: i2s@2901000 {
@@ -1584,7 +1631,7 @@
 			#iommu-cells = <1>;
 
 			nvidia,memory-controller = <&mc>;
-			status = "okay";
+			status = "disabled";
 		};
 
 		smmu: iommu@12000000 {
@@ -2839,7 +2886,7 @@
 	};
 
 	pmu {
-		compatible = "arm,armv8-pmuv3";
+		compatible = "nvidia,carmel-pmu";
 		interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>,
@@ -2876,11 +2923,6 @@
 		 * for 8x and 11.025x sample rate streams.
 		 */
 		assigned-clock-rates = <258000000>;
-
-		interconnects = <&mc TEGRA194_MEMORY_CLIENT_APEDMAR &emc>,
-				<&mc TEGRA194_MEMORY_CLIENT_APEDMAW &emc>;
-		interconnect-names = "dma-mem", "write";
-		iommus = <&smmu TEGRA194_SID_APE>;
 	};
 
 	tcu: serial {
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
index efbbb878ba5a..34d6a01ee1c6 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
@@ -1,6 +1,9 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/input/gpio-keys.h>
+
 #include "tegra234-p3701-0000.dtsi"
 #include "tegra234-p3737-0000.dtsi"
 
@@ -11,6 +14,1744 @@
 	aliases {
 		mmc3 = "/bus@0/mmc@3460000";
 		serial0 = &tcu;
+		serial1 = &uarta;
+	};
+
+	bus@0 {
+		aconnect@2900000 {
+			status = "okay";
+
+			ahub@2900800 {
+				status = "okay";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0x0>;
+
+						xbar_admaif0: endpoint {
+							remote-endpoint = <&admaif0>;
+						};
+					};
+
+					port@1 {
+						reg = <0x1>;
+
+						xbar_admaif1: endpoint {
+							remote-endpoint = <&admaif1>;
+						};
+					};
+
+					port@2 {
+						reg = <0x2>;
+
+						xbar_admaif2: endpoint {
+							remote-endpoint = <&admaif2>;
+						};
+					};
+
+					port@3 {
+						reg = <0x3>;
+
+						xbar_admaif3: endpoint {
+							remote-endpoint = <&admaif3>;
+						};
+					};
+
+					port@4 {
+						reg = <0x4>;
+
+						xbar_admaif4: endpoint {
+							remote-endpoint = <&admaif4>;
+						};
+					};
+
+					port@5 {
+						reg = <0x5>;
+
+						xbar_admaif5: endpoint {
+							remote-endpoint = <&admaif5>;
+						};
+					};
+
+					port@6 {
+						reg = <0x6>;
+
+						xbar_admaif6: endpoint {
+							remote-endpoint = <&admaif6>;
+						};
+					};
+
+					port@7 {
+						reg = <0x7>;
+
+						xbar_admaif7: endpoint {
+							remote-endpoint = <&admaif7>;
+						};
+					};
+
+					port@8 {
+						reg = <0x8>;
+
+						xbar_admaif8: endpoint {
+							remote-endpoint = <&admaif8>;
+						};
+					};
+
+					port@9 {
+						reg = <0x9>;
+
+						xbar_admaif9: endpoint {
+							remote-endpoint = <&admaif9>;
+						};
+					};
+
+					port@a {
+						reg = <0xa>;
+
+						xbar_admaif10: endpoint {
+							remote-endpoint = <&admaif10>;
+						};
+					};
+
+					port@b {
+						reg = <0xb>;
+
+						xbar_admaif11: endpoint {
+							remote-endpoint = <&admaif11>;
+						};
+					};
+
+					port@c {
+						reg = <0xc>;
+
+						xbar_admaif12: endpoint {
+							remote-endpoint = <&admaif12>;
+						};
+					};
+
+					port@d {
+						reg = <0xd>;
+
+						xbar_admaif13: endpoint {
+							remote-endpoint = <&admaif13>;
+						};
+					};
+
+					port@e {
+						reg = <0xe>;
+
+						xbar_admaif14: endpoint {
+							remote-endpoint = <&admaif14>;
+						};
+					};
+
+					port@f {
+						reg = <0xf>;
+
+						xbar_admaif15: endpoint {
+							remote-endpoint = <&admaif15>;
+						};
+					};
+
+					port@10 {
+						reg = <0x10>;
+
+						xbar_admaif16: endpoint {
+							remote-endpoint = <&admaif16>;
+						};
+					};
+
+					port@11 {
+						reg = <0x11>;
+
+						xbar_admaif17: endpoint {
+							remote-endpoint = <&admaif17>;
+						};
+					};
+
+					port@12 {
+						reg = <0x12>;
+
+						xbar_admaif18: endpoint {
+							remote-endpoint = <&admaif18>;
+						};
+					};
+
+					port@13 {
+						reg = <0x13>;
+
+						xbar_admaif19: endpoint {
+							remote-endpoint = <&admaif19>;
+						};
+					};
+
+					xbar_i2s1_port: port@14 {
+						reg = <0x14>;
+
+						xbar_i2s1: endpoint {
+							remote-endpoint = <&i2s1_cif>;
+						};
+					};
+
+					xbar_i2s2_port: port@15 {
+						reg = <0x15>;
+
+						xbar_i2s2: endpoint {
+							remote-endpoint = <&i2s2_cif>;
+						};
+					};
+
+					xbar_i2s4_port: port@17 {
+						reg = <0x17>;
+
+						xbar_i2s4: endpoint {
+							remote-endpoint = <&i2s4_cif>;
+						};
+					};
+
+					xbar_i2s6_port: port@19 {
+						reg = <0x19>;
+
+						xbar_i2s6: endpoint {
+							remote-endpoint = <&i2s6_cif>;
+						};
+					};
+
+					xbar_dmic3_port: port@1c {
+						reg = <0x1c>;
+
+						xbar_dmic3: endpoint {
+							remote-endpoint = <&dmic3_cif>;
+						};
+					};
+
+					xbar_sfc1_in_port: port@20 {
+						reg = <0x20>;
+
+						xbar_sfc1_in: endpoint {
+							remote-endpoint = <&sfc1_cif_in>;
+						};
+					};
+
+					port@21 {
+						reg = <0x21>;
+
+						xbar_sfc1_out: endpoint {
+							remote-endpoint = <&sfc1_cif_out>;
+						};
+					};
+
+					xbar_sfc2_in_port: port@22 {
+						reg = <0x22>;
+
+						xbar_sfc2_in: endpoint {
+							remote-endpoint = <&sfc2_cif_in>;
+						};
+					};
+
+					port@23 {
+						reg = <0x23>;
+
+						xbar_sfc2_out: endpoint {
+							remote-endpoint = <&sfc2_cif_out>;
+						};
+					};
+
+					xbar_sfc3_in_port: port@24 {
+						reg = <0x24>;
+
+						xbar_sfc3_in: endpoint {
+							remote-endpoint = <&sfc3_cif_in>;
+						};
+					};
+
+					port@25 {
+						reg = <0x25>;
+
+						xbar_sfc3_out: endpoint {
+							remote-endpoint = <&sfc3_cif_out>;
+						};
+					};
+
+					xbar_sfc4_in_port: port@26 {
+						reg = <0x26>;
+
+						xbar_sfc4_in: endpoint {
+							remote-endpoint = <&sfc4_cif_in>;
+						};
+					};
+
+					port@27 {
+						reg = <0x27>;
+
+						xbar_sfc4_out: endpoint {
+							remote-endpoint = <&sfc4_cif_out>;
+						};
+					};
+
+					xbar_mvc1_in_port: port@28 {
+						reg = <0x28>;
+
+						xbar_mvc1_in: endpoint {
+							remote-endpoint = <&mvc1_cif_in>;
+						};
+					};
+
+					port@29 {
+						reg = <0x29>;
+
+						xbar_mvc1_out: endpoint {
+							remote-endpoint = <&mvc1_cif_out>;
+						};
+					};
+
+					xbar_mvc2_in_port: port@2a {
+						reg = <0x2a>;
+
+						xbar_mvc2_in: endpoint {
+							remote-endpoint = <&mvc2_cif_in>;
+						};
+					};
+
+					port@2b {
+						reg = <0x2b>;
+
+						xbar_mvc2_out: endpoint {
+							remote-endpoint = <&mvc2_cif_out>;
+						};
+					};
+
+					xbar_amx1_in1_port: port@2c {
+						reg = <0x2c>;
+
+						xbar_amx1_in1: endpoint {
+							remote-endpoint = <&amx1_in1>;
+						};
+					};
+
+					xbar_amx1_in2_port: port@2d {
+						reg = <0x2d>;
+
+						xbar_amx1_in2: endpoint {
+							remote-endpoint = <&amx1_in2>;
+						};
+					};
+
+					xbar_amx1_in3_port: port@2e {
+						reg = <0x2e>;
+
+						xbar_amx1_in3: endpoint {
+							remote-endpoint = <&amx1_in3>;
+						};
+					};
+
+					xbar_amx1_in4_port: port@2f {
+						reg = <0x2f>;
+
+						xbar_amx1_in4: endpoint {
+							remote-endpoint = <&amx1_in4>;
+						};
+					};
+
+					port@30 {
+						reg = <0x30>;
+
+						xbar_amx1_out: endpoint {
+							remote-endpoint = <&amx1_out>;
+						};
+					};
+
+					xbar_amx2_in1_port: port@31 {
+						reg = <0x31>;
+
+						xbar_amx2_in1: endpoint {
+							remote-endpoint = <&amx2_in1>;
+						};
+					};
+
+					xbar_amx2_in2_port: port@32 {
+						reg = <0x32>;
+
+						xbar_amx2_in2: endpoint {
+							remote-endpoint = <&amx2_in2>;
+						};
+					};
+
+					xbar_amx2_in3_port: port@33 {
+						reg = <0x33>;
+
+						xbar_amx2_in3: endpoint {
+							remote-endpoint = <&amx2_in3>;
+						};
+					};
+
+					xbar_amx2_in4_port: port@34 {
+						reg = <0x34>;
+
+						xbar_amx2_in4: endpoint {
+							remote-endpoint = <&amx2_in4>;
+						};
+					};
+
+					port@35 {
+						reg = <0x35>;
+
+						xbar_amx2_out: endpoint {
+							remote-endpoint = <&amx2_out>;
+						};
+					};
+
+					xbar_amx3_in1_port: port@36 {
+						reg = <0x36>;
+
+						xbar_amx3_in1: endpoint {
+							remote-endpoint = <&amx3_in1>;
+						};
+					};
+
+					xbar_amx3_in2_port: port@37 {
+						reg = <0x37>;
+
+						xbar_amx3_in2: endpoint {
+							remote-endpoint = <&amx3_in2>;
+						};
+					};
+
+					xbar_amx3_in3_port: port@38 {
+						reg = <0x38>;
+
+						xbar_amx3_in3: endpoint {
+							remote-endpoint = <&amx3_in3>;
+						};
+					};
+
+					xbar_amx3_in4_port: port@39 {
+						reg = <0x39>;
+
+						xbar_amx3_in4: endpoint {
+							remote-endpoint = <&amx3_in4>;
+						};
+					};
+
+					port@3a {
+						reg = <0x3a>;
+
+						xbar_amx3_out: endpoint {
+							remote-endpoint = <&amx3_out>;
+						};
+					};
+
+					xbar_amx4_in1_port: port@3b {
+						reg = <0x3b>;
+
+						xbar_amx4_in1: endpoint {
+							remote-endpoint = <&amx4_in1>;
+						};
+					};
+
+					xbar_amx4_in2_port: port@3c {
+						reg = <0x3c>;
+
+						xbar_amx4_in2: endpoint {
+							remote-endpoint = <&amx4_in2>;
+						};
+					};
+
+					xbar_amx4_in3_port: port@3d {
+						reg = <0x3d>;
+
+						xbar_amx4_in3: endpoint {
+							remote-endpoint = <&amx4_in3>;
+						};
+					};
+
+					xbar_amx4_in4_port: port@3e {
+						reg = <0x3e>;
+
+						xbar_amx4_in4: endpoint {
+							remote-endpoint = <&amx4_in4>;
+						};
+					};
+
+					port@3f {
+						reg = <0x3f>;
+
+						xbar_amx4_out: endpoint {
+							remote-endpoint = <&amx4_out>;
+						};
+					};
+
+					xbar_adx1_in_port: port@40 {
+						reg = <0x40>;
+
+						xbar_adx1_in: endpoint {
+							remote-endpoint = <&adx1_in>;
+						};
+					};
+
+					port@41 {
+						reg = <0x41>;
+
+						xbar_adx1_out1: endpoint {
+							remote-endpoint = <&adx1_out1>;
+						};
+					};
+
+					port@42 {
+						reg = <0x42>;
+
+						xbar_adx1_out2: endpoint {
+							remote-endpoint = <&adx1_out2>;
+						};
+					};
+
+					port@43 {
+						reg = <0x43>;
+
+						xbar_adx1_out3: endpoint {
+							remote-endpoint = <&adx1_out3>;
+						};
+					};
+
+					port@44 {
+						reg = <0x44>;
+
+						xbar_adx1_out4: endpoint {
+							remote-endpoint = <&adx1_out4>;
+						};
+					};
+
+					xbar_adx2_in_port: port@45 {
+						reg = <0x45>;
+
+						xbar_adx2_in: endpoint {
+							remote-endpoint = <&adx2_in>;
+						};
+					};
+
+					port@46 {
+						reg = <0x46>;
+
+						xbar_adx2_out1: endpoint {
+							remote-endpoint = <&adx2_out1>;
+						};
+					};
+
+					port@47 {
+						reg = <0x47>;
+
+						xbar_adx2_out2: endpoint {
+							remote-endpoint = <&adx2_out2>;
+						};
+					};
+
+					port@48 {
+						reg = <0x48>;
+
+						xbar_adx2_out3: endpoint {
+							remote-endpoint = <&adx2_out3>;
+						};
+					};
+
+					port@49 {
+						reg = <0x49>;
+
+						xbar_adx2_out4: endpoint {
+							remote-endpoint = <&adx2_out4>;
+						};
+					};
+
+					xbar_adx3_in_port: port@4a {
+						reg = <0x4a>;
+
+						xbar_adx3_in: endpoint {
+							remote-endpoint = <&adx3_in>;
+						};
+					};
+
+					port@4b {
+						reg = <0x4b>;
+
+						xbar_adx3_out1: endpoint {
+							remote-endpoint = <&adx3_out1>;
+						};
+					};
+
+					port@4c {
+						reg = <0x4c>;
+
+						xbar_adx3_out2: endpoint {
+							remote-endpoint = <&adx3_out2>;
+						};
+					};
+
+					port@4d {
+						reg = <0x4d>;
+
+						xbar_adx3_out3: endpoint {
+							remote-endpoint = <&adx3_out3>;
+						};
+					};
+
+					port@4e {
+						reg = <0x4e>;
+
+						xbar_adx3_out4: endpoint {
+							remote-endpoint = <&adx3_out4>;
+						};
+					};
+
+					xbar_adx4_in_port: port@4f {
+						reg = <0x4f>;
+
+						xbar_adx4_in: endpoint {
+							remote-endpoint = <&adx4_in>;
+						};
+					};
+
+					port@50 {
+						reg = <0x50>;
+
+						xbar_adx4_out1: endpoint {
+							remote-endpoint = <&adx4_out1>;
+						};
+					};
+
+					port@51 {
+						reg = <0x51>;
+
+						xbar_adx4_out2: endpoint {
+							remote-endpoint = <&adx4_out2>;
+						};
+					};
+
+					port@52 {
+						reg = <0x52>;
+
+						xbar_adx4_out3: endpoint {
+							remote-endpoint = <&adx4_out3>;
+						};
+					};
+
+					port@53 {
+						reg = <0x53>;
+
+						xbar_adx4_out4: endpoint {
+							remote-endpoint = <&adx4_out4>;
+						};
+					};
+
+					xbar_mix_in1_port: port@54 {
+						reg = <0x54>;
+
+						xbar_mix_in1: endpoint {
+							remote-endpoint = <&mix_in1>;
+						};
+					};
+
+					xbar_mix_in2_port: port@55 {
+						reg = <0x55>;
+
+						xbar_mix_in2: endpoint {
+							remote-endpoint = <&mix_in2>;
+						};
+					};
+
+					xbar_mix_in3_port: port@56 {
+						reg = <0x56>;
+
+						xbar_mix_in3: endpoint {
+							remote-endpoint = <&mix_in3>;
+						};
+					};
+
+					xbar_mix_in4_port: port@57 {
+						reg = <0x57>;
+
+						xbar_mix_in4: endpoint {
+							remote-endpoint = <&mix_in4>;
+						};
+					};
+
+					xbar_mix_in5_port: port@58 {
+						reg = <0x58>;
+
+						xbar_mix_in5: endpoint {
+							remote-endpoint = <&mix_in5>;
+						};
+					};
+
+					xbar_mix_in6_port: port@59 {
+						reg = <0x59>;
+
+						xbar_mix_in6: endpoint {
+							remote-endpoint = <&mix_in6>;
+						};
+					};
+
+					xbar_mix_in7_port: port@5a {
+						reg = <0x5a>;
+
+						xbar_mix_in7: endpoint {
+							remote-endpoint = <&mix_in7>;
+						};
+					};
+
+					xbar_mix_in8_port: port@5b {
+						reg = <0x5b>;
+
+						xbar_mix_in8: endpoint {
+							remote-endpoint = <&mix_in8>;
+						};
+					};
+
+					xbar_mix_in9_port: port@5c {
+						reg = <0x5c>;
+
+						xbar_mix_in9: endpoint {
+							remote-endpoint = <&mix_in9>;
+						};
+					};
+
+					xbar_mix_in10_port: port@5d {
+						reg = <0x5d>;
+
+						xbar_mix_in10: endpoint {
+							remote-endpoint = <&mix_in10>;
+						};
+					};
+
+					port@5e {
+						reg = <0x5e>;
+
+						xbar_mix_out1: endpoint {
+							remote-endpoint = <&mix_out1>;
+						};
+					};
+
+					port@5f {
+						reg = <0x5f>;
+
+						xbar_mix_out2: endpoint {
+							remote-endpoint = <&mix_out2>;
+						};
+					};
+
+					port@60 {
+						reg = <0x60>;
+
+						xbar_mix_out3: endpoint {
+							remote-endpoint = <&mix_out3>;
+						};
+					};
+
+					port@61 {
+						reg = <0x61>;
+
+						xbar_mix_out4: endpoint {
+							remote-endpoint = <&mix_out4>;
+						};
+					};
+
+					port@62 {
+						reg = <0x62>;
+
+						xbar_mix_out5: endpoint {
+							remote-endpoint = <&mix_out5>;
+						};
+					};
+				};
+
+				i2s@2901000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							i2s1_cif: endpoint {
+								remote-endpoint = <&xbar_i2s1>;
+							};
+						};
+
+						i2s1_port: port@1 {
+							reg = <1>;
+
+							i2s1_dap: endpoint {
+								dai-format = "i2s";
+								/* placeholder for external codec */
+							};
+						};
+					};
+				};
+
+				i2s@2901100 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							i2s2_cif: endpoint {
+								remote-endpoint = <&xbar_i2s2>;
+							};
+						};
+
+						i2s2_port: port@1 {
+							reg = <1>;
+
+							i2s2_dap: endpoint {
+								dai-format = "i2s";
+								/* placeholder for external codec */
+							};
+						};
+					};
+				};
+
+				i2s@2901300 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							i2s4_cif: endpoint {
+								remote-endpoint = <&xbar_i2s4>;
+							};
+						};
+
+						i2s4_port: port@1 {
+							reg = <1>;
+
+							i2s4_dap: endpoint {
+								dai-format = "i2s";
+								/* placeholder for external codec */
+							};
+						};
+					};
+				};
+
+				i2s@2901500 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							i2s6_cif: endpoint {
+								remote-endpoint = <&xbar_i2s6>;
+							};
+						};
+
+						i2s6_port: port@1 {
+							reg = <1>;
+
+							i2s6_dap: endpoint {
+								dai-format = "i2s";
+								/* placeholder for external codec */
+							};
+						};
+					};
+				};
+
+				sfc@2902000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							sfc1_cif_in: endpoint {
+								remote-endpoint = <&xbar_sfc1_in>;
+							};
+						};
+
+						sfc1_out_port: port@1 {
+							reg = <1>;
+
+							sfc1_cif_out: endpoint {
+								remote-endpoint = <&xbar_sfc1_out>;
+							};
+						};
+					};
+				};
+
+				sfc@2902200 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							sfc2_cif_in: endpoint {
+								remote-endpoint = <&xbar_sfc2_in>;
+							};
+						};
+
+						sfc2_out_port: port@1 {
+							reg = <1>;
+
+							sfc2_cif_out: endpoint {
+								remote-endpoint = <&xbar_sfc2_out>;
+							};
+						};
+					};
+				};
+
+				sfc@2902400 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							sfc3_cif_in: endpoint {
+								remote-endpoint = <&xbar_sfc3_in>;
+							};
+						};
+
+						sfc3_out_port: port@1 {
+							reg = <1>;
+
+							sfc3_cif_out: endpoint {
+								remote-endpoint = <&xbar_sfc3_out>;
+							};
+						};
+					};
+				};
+
+				sfc@2902600 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							sfc4_cif_in: endpoint {
+								remote-endpoint = <&xbar_sfc4_in>;
+							};
+						};
+
+						sfc4_out_port: port@1 {
+							reg = <1>;
+
+							sfc4_cif_out: endpoint {
+								remote-endpoint = <&xbar_sfc4_out>;
+							};
+						};
+					};
+				};
+
+				amx@2903000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							amx1_in1: endpoint {
+								remote-endpoint = <&xbar_amx1_in1>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							amx1_in2: endpoint {
+								remote-endpoint = <&xbar_amx1_in2>;
+							};
+						};
+
+						port@2 {
+							reg = <2>;
+
+							amx1_in3: endpoint {
+								remote-endpoint = <&xbar_amx1_in3>;
+							};
+						};
+
+						port@3 {
+							reg = <3>;
+
+							amx1_in4: endpoint {
+								remote-endpoint = <&xbar_amx1_in4>;
+							};
+						};
+
+						amx1_out_port: port@4 {
+							reg = <4>;
+
+							amx1_out: endpoint {
+								remote-endpoint = <&xbar_amx1_out>;
+							};
+						};
+					};
+				};
+
+				amx@2903100 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							amx2_in1: endpoint {
+								remote-endpoint = <&xbar_amx2_in1>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							amx2_in2: endpoint {
+								remote-endpoint = <&xbar_amx2_in2>;
+							};
+						};
+
+						port@2 {
+							reg = <2>;
+
+							amx2_in3: endpoint {
+								remote-endpoint = <&xbar_amx2_in3>;
+							};
+						};
+
+						port@3 {
+							reg = <3>;
+
+							amx2_in4: endpoint {
+								remote-endpoint = <&xbar_amx2_in4>;
+							};
+						};
+
+						amx2_out_port: port@4 {
+							reg = <4>;
+
+							amx2_out: endpoint {
+								remote-endpoint = <&xbar_amx2_out>;
+							};
+						};
+					};
+				};
+
+				amx@2903200 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							amx3_in1: endpoint {
+								remote-endpoint = <&xbar_amx3_in1>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							amx3_in2: endpoint {
+								remote-endpoint = <&xbar_amx3_in2>;
+							};
+						};
+
+						port@2 {
+							reg = <2>;
+
+							amx3_in3: endpoint {
+								remote-endpoint = <&xbar_amx3_in3>;
+							};
+						};
+
+						port@3 {
+							reg = <3>;
+
+							amx3_in4: endpoint {
+								remote-endpoint = <&xbar_amx3_in4>;
+							};
+						};
+
+						amx3_out_port: port@4 {
+							reg = <4>;
+
+							amx3_out: endpoint {
+								remote-endpoint = <&xbar_amx3_out>;
+							};
+						};
+					};
+				};
+
+				amx@2903300 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							amx4_in1: endpoint {
+								remote-endpoint = <&xbar_amx4_in1>;
+							};
+						};
+
+						port@1 {
+							reg = <1>;
+
+							amx4_in2: endpoint {
+								remote-endpoint = <&xbar_amx4_in2>;
+							};
+						};
+
+						port@2 {
+							reg = <2>;
+
+							amx4_in3: endpoint {
+								remote-endpoint = <&xbar_amx4_in3>;
+							};
+						};
+
+						port@3 {
+							reg = <3>;
+
+							amx4_in4: endpoint {
+								remote-endpoint = <&xbar_amx4_in4>;
+							};
+						};
+
+						amx4_out_port: port@4 {
+							reg = <4>;
+
+							amx4_out: endpoint {
+								remote-endpoint = <&xbar_amx4_out>;
+							};
+						};
+					};
+				};
+
+				adx@2903800 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							adx1_in: endpoint {
+								remote-endpoint = <&xbar_adx1_in>;
+							};
+						};
+
+						adx1_out1_port: port@1 {
+							reg = <1>;
+
+							adx1_out1: endpoint {
+								remote-endpoint = <&xbar_adx1_out1>;
+							};
+						};
+
+						adx1_out2_port: port@2 {
+							reg = <2>;
+
+							adx1_out2: endpoint {
+								remote-endpoint = <&xbar_adx1_out2>;
+							};
+						};
+
+						adx1_out3_port: port@3 {
+							reg = <3>;
+
+							adx1_out3: endpoint {
+								remote-endpoint = <&xbar_adx1_out3>;
+							};
+						};
+
+						adx1_out4_port: port@4 {
+							reg = <4>;
+
+							adx1_out4: endpoint {
+								remote-endpoint = <&xbar_adx1_out4>;
+							};
+						};
+					};
+				};
+
+				adx@2903900 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							adx2_in: endpoint {
+								remote-endpoint = <&xbar_adx2_in>;
+							};
+						};
+
+						adx2_out1_port: port@1 {
+							reg = <1>;
+
+							adx2_out1: endpoint {
+								remote-endpoint = <&xbar_adx2_out1>;
+							};
+						};
+
+						adx2_out2_port: port@2 {
+							reg = <2>;
+
+							adx2_out2: endpoint {
+								remote-endpoint = <&xbar_adx2_out2>;
+							};
+						};
+
+						adx2_out3_port: port@3 {
+							reg = <3>;
+
+							adx2_out3: endpoint {
+								remote-endpoint = <&xbar_adx2_out3>;
+							};
+						};
+
+						adx2_out4_port: port@4 {
+							reg = <4>;
+
+							adx2_out4: endpoint {
+								remote-endpoint = <&xbar_adx2_out4>;
+							};
+						};
+					};
+				};
+
+				adx@2903a00 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							adx3_in: endpoint {
+								remote-endpoint = <&xbar_adx3_in>;
+							};
+						};
+
+						adx3_out1_port: port@1 {
+							reg = <1>;
+
+							adx3_out1: endpoint {
+								remote-endpoint = <&xbar_adx3_out1>;
+							};
+						};
+
+						adx3_out2_port: port@2 {
+							reg = <2>;
+
+							adx3_out2: endpoint {
+								remote-endpoint = <&xbar_adx3_out2>;
+							};
+						};
+
+						adx3_out3_port: port@3 {
+							reg = <3>;
+
+							adx3_out3: endpoint {
+								remote-endpoint = <&xbar_adx3_out3>;
+							};
+						};
+
+						adx3_out4_port: port@4 {
+							reg = <4>;
+
+							adx3_out4: endpoint {
+								remote-endpoint = <&xbar_adx3_out4>;
+							};
+						};
+					};
+				};
+
+				adx@2903b00 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							adx4_in: endpoint {
+								remote-endpoint = <&xbar_adx4_in>;
+							};
+						};
+
+						adx4_out1_port: port@1 {
+							reg = <1>;
+
+							adx4_out1: endpoint {
+								remote-endpoint = <&xbar_adx4_out1>;
+							};
+						};
+
+						adx4_out2_port: port@2 {
+							reg = <2>;
+
+							adx4_out2: endpoint {
+								remote-endpoint = <&xbar_adx4_out2>;
+							};
+						};
+
+						adx4_out3_port: port@3 {
+							reg = <3>;
+
+							adx4_out3: endpoint {
+								remote-endpoint = <&xbar_adx4_out3>;
+							};
+						};
+
+						adx4_out4_port: port@4 {
+							reg = <4>;
+
+							adx4_out4: endpoint {
+								remote-endpoint = <&xbar_adx4_out4>;
+							};
+						};
+					};
+				};
+
+				dmic@2904200 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							dmic3_cif: endpoint {
+								remote-endpoint = <&xbar_dmic3>;
+							};
+						};
+
+						dmic3_port: port@1 {
+							reg = <1>;
+
+							dmic3_dap: endpoint {
+								/* placeholder for external codec */
+							};
+						};
+					};
+				};
+
+				mvc@290a000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							mvc1_cif_in: endpoint {
+								remote-endpoint = <&xbar_mvc1_in>;
+							};
+						};
+
+						mvc1_out_port: port@1 {
+							reg = <1>;
+
+							mvc1_cif_out: endpoint {
+								remote-endpoint = <&xbar_mvc1_out>;
+							};
+						};
+					};
+				};
+
+				mvc@290a200 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+
+							mvc2_cif_in: endpoint {
+								remote-endpoint = <&xbar_mvc2_in>;
+							};
+						};
+
+						mvc2_out_port: port@1 {
+							reg = <1>;
+
+							mvc2_cif_out: endpoint {
+								remote-endpoint = <&xbar_mvc2_out>;
+							};
+						};
+					};
+				};
+
+				amixer@290bb00 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0x0>;
+
+							mix_in1: endpoint {
+								remote-endpoint = <&xbar_mix_in1>;
+							};
+						};
+
+						port@1 {
+							reg = <0x1>;
+
+							mix_in2: endpoint {
+								remote-endpoint = <&xbar_mix_in2>;
+							};
+						};
+
+						port@2 {
+							reg = <0x2>;
+
+							mix_in3: endpoint {
+								remote-endpoint = <&xbar_mix_in3>;
+							};
+						};
+
+						port@3 {
+							reg = <0x3>;
+
+							mix_in4: endpoint {
+								remote-endpoint = <&xbar_mix_in4>;
+							};
+						};
+
+						port@4 {
+							reg = <0x4>;
+
+							mix_in5: endpoint {
+								remote-endpoint = <&xbar_mix_in5>;
+							};
+						};
+
+						port@5 {
+							reg = <0x5>;
+
+							mix_in6: endpoint {
+								remote-endpoint = <&xbar_mix_in6>;
+							};
+						};
+
+						port@6 {
+							reg = <0x6>;
+
+							mix_in7: endpoint {
+								remote-endpoint = <&xbar_mix_in7>;
+							};
+						};
+
+						port@7 {
+							reg = <0x7>;
+
+							mix_in8: endpoint {
+								remote-endpoint = <&xbar_mix_in8>;
+							};
+						};
+
+						port@8 {
+							reg = <0x8>;
+
+							mix_in9: endpoint {
+								remote-endpoint = <&xbar_mix_in9>;
+							};
+						};
+
+						port@9 {
+							reg = <0x9>;
+
+							mix_in10: endpoint {
+								remote-endpoint = <&xbar_mix_in10>;
+							};
+						};
+
+						mix_out1_port: port@a {
+							reg = <0xa>;
+
+							mix_out1: endpoint {
+								remote-endpoint = <&xbar_mix_out1>;
+							};
+						};
+
+						mix_out2_port: port@b {
+							reg = <0xb>;
+
+							mix_out2: endpoint {
+								remote-endpoint = <&xbar_mix_out2>;
+							};
+						};
+
+						mix_out3_port: port@c {
+							reg = <0xc>;
+
+							mix_out3: endpoint {
+								remote-endpoint = <&xbar_mix_out3>;
+							};
+						};
+
+						mix_out4_port: port@d {
+							reg = <0xd>;
+
+							mix_out4: endpoint {
+								remote-endpoint = <&xbar_mix_out4>;
+							};
+						};
+
+						mix_out5_port: port@e {
+							reg = <0xe>;
+
+							mix_out5: endpoint {
+								remote-endpoint = <&xbar_mix_out5>;
+							};
+						};
+					};
+				};
+
+				admaif@290f000 {
+					status = "okay";
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						admaif0_port: port@0 {
+							reg = <0x0>;
+
+							admaif0: endpoint {
+								remote-endpoint = <&xbar_admaif0>;
+							};
+						};
+
+						admaif1_port: port@1 {
+							reg = <0x1>;
+
+							admaif1: endpoint {
+								remote-endpoint = <&xbar_admaif1>;
+							};
+						};
+
+						admaif2_port: port@2 {
+							reg = <0x2>;
+
+							admaif2: endpoint {
+								remote-endpoint = <&xbar_admaif2>;
+							};
+						};
+
+						admaif3_port: port@3 {
+							reg = <0x3>;
+
+							admaif3: endpoint {
+								remote-endpoint = <&xbar_admaif3>;
+							};
+						};
+
+						admaif4_port: port@4 {
+							reg = <0x4>;
+
+							admaif4: endpoint {
+								remote-endpoint = <&xbar_admaif4>;
+							};
+						};
+
+						admaif5_port: port@5 {
+							reg = <0x5>;
+
+							admaif5: endpoint {
+								remote-endpoint = <&xbar_admaif5>;
+							};
+						};
+
+						admaif6_port: port@6 {
+							reg = <0x6>;
+
+							admaif6: endpoint {
+								remote-endpoint = <&xbar_admaif6>;
+							};
+						};
+
+						admaif7_port: port@7 {
+							reg = <0x7>;
+
+							admaif7: endpoint {
+								remote-endpoint = <&xbar_admaif7>;
+							};
+						};
+
+						admaif8_port: port@8 {
+							reg = <0x8>;
+
+							admaif8: endpoint {
+								remote-endpoint = <&xbar_admaif8>;
+							};
+						};
+
+						admaif9_port: port@9 {
+							reg = <0x9>;
+
+							admaif9: endpoint {
+								remote-endpoint = <&xbar_admaif9>;
+							};
+						};
+
+						admaif10_port: port@a {
+							reg = <0xa>;
+
+							admaif10: endpoint {
+								remote-endpoint = <&xbar_admaif10>;
+							};
+						};
+
+						admaif11_port: port@b {
+							reg = <0xb>;
+
+							admaif11: endpoint {
+								remote-endpoint = <&xbar_admaif11>;
+							};
+						};
+
+						admaif12_port: port@c {
+							reg = <0xc>;
+
+							admaif12: endpoint {
+								remote-endpoint = <&xbar_admaif12>;
+							};
+						};
+
+						admaif13_port: port@d {
+							reg = <0xd>;
+
+							admaif13: endpoint {
+								remote-endpoint = <&xbar_admaif13>;
+							};
+						};
+
+						admaif14_port: port@e {
+							reg = <0xe>;
+
+							admaif14: endpoint {
+								remote-endpoint = <&xbar_admaif14>;
+							};
+						};
+
+						admaif15_port: port@f {
+							reg = <0xf>;
+
+							admaif15: endpoint {
+								remote-endpoint = <&xbar_admaif15>;
+							};
+						};
+
+						admaif16_port: port@10 {
+							reg = <0x10>;
+
+							admaif16: endpoint {
+								remote-endpoint = <&xbar_admaif16>;
+							};
+						};
+
+						admaif17_port: port@11 {
+							reg = <0x11>;
+
+							admaif17: endpoint {
+								remote-endpoint = <&xbar_admaif17>;
+							};
+						};
+
+						admaif18_port: port@12 {
+							reg = <0x12>;
+
+							admaif18: endpoint {
+								remote-endpoint = <&xbar_admaif18>;
+							};
+						};
+
+						admaif19_port: port@13 {
+							reg = <0x13>;
+
+							admaif19: endpoint {
+								remote-endpoint = <&xbar_admaif19>;
+							};
+						};
+					};
+				};
+			};
+
+			dma-controller@2930000 {
+				status = "okay";
+			};
+
+			interrupt-controller@2a40000 {
+				status = "okay";
+			};
+		};
+
+		serial@3100000 {
+			compatible = "nvidia,tegra194-hsuart";
+			status = "okay";
+		};
+
+		hda@3510000 {
+			nvidia,model = "NVIDIA Jetson AGX Orin HDA";
+		};
 	};
 
 	chosen {
@@ -18,7 +1759,90 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		status = "okay";
+
+		force-recovery {
+			label = "Force Recovery";
+			gpios = <&gpio TEGRA234_MAIN_GPIO(G, 0) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <BTN_1>;
+		};
+
+		power-key {
+			label = "Power";
+			gpios = <&gpio_aon TEGRA234_AON_GPIO(EE, 4) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_POWER>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		suspend {
+			label = "Suspend";
+			gpios = <&gpio TEGRA234_MAIN_GPIO(G, 2) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_KEY>;
+			linux,code = <KEY_SLEEP>;
+		};
+	};
+
 	serial {
 		status = "okay";
 	};
+
+	sound {
+		status = "okay";
+
+		compatible = "nvidia,tegra186-audio-graph-card";
+
+		dais = /* ADMAIF (FE) Ports */
+		       <&admaif0_port>, <&admaif1_port>, <&admaif2_port>, <&admaif3_port>,
+		       <&admaif4_port>, <&admaif5_port>, <&admaif6_port>, <&admaif7_port>,
+		       <&admaif8_port>, <&admaif9_port>, <&admaif10_port>, <&admaif11_port>,
+		       <&admaif12_port>, <&admaif13_port>, <&admaif14_port>, <&admaif15_port>,
+		       <&admaif16_port>, <&admaif17_port>, <&admaif18_port>, <&admaif19_port>,
+		       /* XBAR Ports */
+		       <&xbar_i2s1_port>, <&xbar_i2s2_port>, <&xbar_i2s4_port>,
+		       <&xbar_i2s6_port>, <&xbar_dmic3_port>,
+		       <&xbar_sfc1_in_port>, <&xbar_sfc2_in_port>,
+		       <&xbar_sfc3_in_port>, <&xbar_sfc4_in_port>,
+		       <&xbar_mvc1_in_port>, <&xbar_mvc2_in_port>,
+		       <&xbar_amx1_in1_port>, <&xbar_amx1_in2_port>,
+		       <&xbar_amx1_in3_port>, <&xbar_amx1_in4_port>,
+		       <&xbar_amx2_in1_port>, <&xbar_amx2_in2_port>,
+		       <&xbar_amx2_in3_port>, <&xbar_amx2_in4_port>,
+		       <&xbar_amx3_in1_port>, <&xbar_amx3_in2_port>,
+		       <&xbar_amx3_in3_port>, <&xbar_amx3_in4_port>,
+		       <&xbar_amx4_in1_port>, <&xbar_amx4_in2_port>,
+		       <&xbar_amx4_in3_port>, <&xbar_amx4_in4_port>,
+		       <&xbar_adx1_in_port>, <&xbar_adx2_in_port>,
+		       <&xbar_adx3_in_port>, <&xbar_adx4_in_port>,
+		       <&xbar_mix_in1_port>, <&xbar_mix_in2_port>,
+		       <&xbar_mix_in3_port>, <&xbar_mix_in4_port>,
+		       <&xbar_mix_in5_port>, <&xbar_mix_in6_port>,
+		       <&xbar_mix_in7_port>, <&xbar_mix_in8_port>,
+		       <&xbar_mix_in9_port>, <&xbar_mix_in10_port>,
+		       /* HW accelerators */
+		       <&sfc1_out_port>, <&sfc2_out_port>,
+		       <&sfc3_out_port>, <&sfc4_out_port>,
+		       <&mvc1_out_port>, <&mvc2_out_port>,
+		       <&amx1_out_port>, <&amx2_out_port>,
+		       <&amx3_out_port>, <&amx4_out_port>,
+		       <&adx1_out1_port>, <&adx1_out2_port>,
+		       <&adx1_out3_port>, <&adx1_out4_port>,
+		       <&adx2_out1_port>, <&adx2_out2_port>,
+		       <&adx2_out3_port>, <&adx2_out4_port>,
+		       <&adx3_out1_port>, <&adx3_out2_port>,
+		       <&adx3_out3_port>, <&adx3_out4_port>,
+		       <&adx4_out1_port>, <&adx4_out2_port>,
+		       <&adx4_out3_port>, <&adx4_out4_port>,
+		       <&mix_out1_port>, <&mix_out2_port>, <&mix_out3_port>,
+		       <&mix_out4_port>, <&mix_out5_port>,
+		       /* BE I/O Ports */
+		       <&i2s1_port>, <&i2s2_port>, <&i2s4_port>, <&i2s6_port>,
+		       <&dmic3_port>;
+
+		label = "NVIDIA Jetson AGX Orin APE";
+	};
 };
diff --git a/arch/arm64/boot/dts/nvidia/tegra234.dtsi b/arch/arm64/boot/dts/nvidia/tegra234.dtsi
index 6b6f15804a1a..aaace605bdaa 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra234.dtsi
@@ -1,9 +1,11 @@
 // SPDX-License-Identifier: GPL-2.0
 
 #include <dt-bindings/clock/tegra234-clock.h>
+#include <dt-bindings/gpio/tegra234-gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/mailbox/tegra186-hsp.h>
 #include <dt-bindings/memory/tegra234-mc.h>
+#include <dt-bindings/power/tegra234-powergate.h>
 #include <dt-bindings/reset/tegra234-reset.h>
 
 / {
@@ -19,6 +21,424 @@
 
 		ranges = <0x0 0x0 0x0 0x40000000>;
 
+		aconnect@2900000 {
+			compatible = "nvidia,tegra234-aconnect",
+				     "nvidia,tegra210-aconnect";
+			clocks = <&bpmp TEGRA234_CLK_APE>,
+				 <&bpmp TEGRA234_CLK_APB2APE>;
+			clock-names = "ape", "apb2ape";
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_AUD>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x02900000 0x02900000 0x200000>;
+			status = "disabled";
+
+			tegra_ahub: ahub@2900800 {
+				compatible = "nvidia,tegra234-ahub";
+				reg = <0x02900800 0x800>;
+				clocks = <&bpmp TEGRA234_CLK_AHUB>;
+				clock-names = "ahub";
+				assigned-clocks = <&bpmp TEGRA234_CLK_AHUB>;
+				assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x02900800 0x02900800 0x11800>;
+				status = "disabled";
+
+				tegra_i2s1: i2s@2901000 {
+					compatible = "nvidia,tegra234-i2s",
+						     "nvidia,tegra210-i2s";
+					reg = <0x2901000 0x100>;
+					clocks = <&bpmp TEGRA234_CLK_I2S1>,
+						 <&bpmp TEGRA234_CLK_I2S1_SYNC_INPUT>;
+					clock-names = "i2s", "sync_input";
+					assigned-clocks = <&bpmp TEGRA234_CLK_I2S1>;
+					assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <1536000>;
+					sound-name-prefix = "I2S1";
+					status = "disabled";
+				};
+
+				tegra_i2s2: i2s@2901100 {
+					compatible = "nvidia,tegra234-i2s",
+						     "nvidia,tegra210-i2s";
+					reg = <0x2901100 0x100>;
+					clocks = <&bpmp TEGRA234_CLK_I2S2>,
+						 <&bpmp TEGRA234_CLK_I2S2_SYNC_INPUT>;
+					clock-names = "i2s", "sync_input";
+					assigned-clocks = <&bpmp TEGRA234_CLK_I2S2>;
+					assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <1536000>;
+					sound-name-prefix = "I2S2";
+					status = "disabled";
+				};
+
+				tegra_i2s3: i2s@2901200 {
+					compatible = "nvidia,tegra234-i2s",
+						     "nvidia,tegra210-i2s";
+					reg = <0x2901200 0x100>;
+					clocks = <&bpmp TEGRA234_CLK_I2S3>,
+						 <&bpmp TEGRA234_CLK_I2S3_SYNC_INPUT>;
+					clock-names = "i2s", "sync_input";
+					assigned-clocks = <&bpmp TEGRA234_CLK_I2S3>;
+					assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <1536000>;
+					sound-name-prefix = "I2S3";
+					status = "disabled";
+				};
+
+				tegra_i2s4: i2s@2901300 {
+					compatible = "nvidia,tegra234-i2s",
+						     "nvidia,tegra210-i2s";
+					reg = <0x2901300 0x100>;
+					clocks = <&bpmp TEGRA234_CLK_I2S4>,
+						 <&bpmp TEGRA234_CLK_I2S4_SYNC_INPUT>;
+					clock-names = "i2s", "sync_input";
+					assigned-clocks = <&bpmp TEGRA234_CLK_I2S4>;
+					assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <1536000>;
+					sound-name-prefix = "I2S4";
+					status = "disabled";
+				};
+
+				tegra_i2s5: i2s@2901400 {
+					compatible = "nvidia,tegra234-i2s",
+						     "nvidia,tegra210-i2s";
+					reg = <0x2901400 0x100>;
+					clocks = <&bpmp TEGRA234_CLK_I2S5>,
+						 <&bpmp TEGRA234_CLK_I2S5_SYNC_INPUT>;
+					clock-names = "i2s", "sync_input";
+					assigned-clocks = <&bpmp TEGRA234_CLK_I2S5>;
+					assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <1536000>;
+					sound-name-prefix = "I2S5";
+					status = "disabled";
+				};
+
+				tegra_i2s6: i2s@2901500 {
+					compatible = "nvidia,tegra234-i2s",
+						     "nvidia,tegra210-i2s";
+					reg = <0x2901500 0x100>;
+					clocks = <&bpmp TEGRA234_CLK_I2S6>,
+						 <&bpmp TEGRA234_CLK_I2S6_SYNC_INPUT>;
+					clock-names = "i2s", "sync_input";
+					assigned-clocks = <&bpmp TEGRA234_CLK_I2S6>;
+					assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <1536000>;
+					sound-name-prefix = "I2S6";
+					status = "disabled";
+				};
+
+				tegra_sfc1: sfc@2902000 {
+					compatible = "nvidia,tegra234-sfc",
+						     "nvidia,tegra210-sfc";
+					reg = <0x2902000 0x200>;
+					sound-name-prefix = "SFC1";
+					status = "disabled";
+				};
+
+				tegra_sfc2: sfc@2902200 {
+					compatible = "nvidia,tegra234-sfc",
+						     "nvidia,tegra210-sfc";
+					reg = <0x2902200 0x200>;
+					sound-name-prefix = "SFC2";
+					status = "disabled";
+				};
+
+				tegra_sfc3: sfc@2902400 {
+					compatible = "nvidia,tegra234-sfc",
+						     "nvidia,tegra210-sfc";
+					reg = <0x2902400 0x200>;
+					sound-name-prefix = "SFC3";
+					status = "disabled";
+				};
+
+				tegra_sfc4: sfc@2902600 {
+					compatible = "nvidia,tegra234-sfc",
+						     "nvidia,tegra210-sfc";
+					reg = <0x2902600 0x200>;
+					sound-name-prefix = "SFC4";
+					status = "disabled";
+				};
+
+				tegra_amx1: amx@2903000 {
+					compatible = "nvidia,tegra234-amx",
+						     "nvidia,tegra194-amx";
+					reg = <0x2903000 0x100>;
+					sound-name-prefix = "AMX1";
+					status = "disabled";
+				};
+
+				tegra_amx2: amx@2903100 {
+					compatible = "nvidia,tegra234-amx",
+						     "nvidia,tegra194-amx";
+					reg = <0x2903100 0x100>;
+					sound-name-prefix = "AMX2";
+					status = "disabled";
+				};
+
+				tegra_amx3: amx@2903200 {
+					compatible = "nvidia,tegra234-amx",
+						     "nvidia,tegra194-amx";
+					reg = <0x2903200 0x100>;
+					sound-name-prefix = "AMX3";
+					status = "disabled";
+				};
+
+				tegra_amx4: amx@2903300 {
+					compatible = "nvidia,tegra234-amx",
+						     "nvidia,tegra194-amx";
+					reg = <0x2903300 0x100>;
+					sound-name-prefix = "AMX4";
+					status = "disabled";
+				};
+
+				tegra_adx1: adx@2903800 {
+					compatible = "nvidia,tegra234-adx",
+						     "nvidia,tegra210-adx";
+					reg = <0x2903800 0x100>;
+					sound-name-prefix = "ADX1";
+					status = "disabled";
+				};
+
+				tegra_adx2: adx@2903900 {
+					compatible = "nvidia,tegra234-adx",
+						     "nvidia,tegra210-adx";
+					reg = <0x2903900 0x100>;
+					sound-name-prefix = "ADX2";
+					status = "disabled";
+				};
+
+				tegra_adx3: adx@2903a00 {
+					compatible = "nvidia,tegra234-adx",
+						     "nvidia,tegra210-adx";
+					reg = <0x2903a00 0x100>;
+					sound-name-prefix = "ADX3";
+					status = "disabled";
+				};
+
+				tegra_adx4: adx@2903b00 {
+					compatible = "nvidia,tegra234-adx",
+						     "nvidia,tegra210-adx";
+					reg = <0x2903b00 0x100>;
+					sound-name-prefix = "ADX4";
+					status = "disabled";
+				};
+
+
+				tegra_dmic1: dmic@2904000 {
+					compatible = "nvidia,tegra234-dmic",
+						     "nvidia,tegra210-dmic";
+					reg = <0x2904000 0x100>;
+					clocks = <&bpmp TEGRA234_CLK_DMIC1>;
+					clock-names = "dmic";
+					assigned-clocks = <&bpmp TEGRA234_CLK_DMIC1>;
+					assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <3072000>;
+					sound-name-prefix = "DMIC1";
+					status = "disabled";
+				};
+
+				tegra_dmic2: dmic@2904100 {
+					compatible = "nvidia,tegra234-dmic",
+						     "nvidia,tegra210-dmic";
+					reg = <0x2904100 0x100>;
+					clocks = <&bpmp TEGRA234_CLK_DMIC2>;
+					clock-names = "dmic";
+					assigned-clocks = <&bpmp TEGRA234_CLK_DMIC2>;
+					assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <3072000>;
+					sound-name-prefix = "DMIC2";
+					status = "disabled";
+				};
+
+				tegra_dmic3: dmic@2904200 {
+					compatible = "nvidia,tegra234-dmic",
+						     "nvidia,tegra210-dmic";
+					reg = <0x2904200 0x100>;
+					clocks = <&bpmp TEGRA234_CLK_DMIC3>;
+					clock-names = "dmic";
+					assigned-clocks = <&bpmp TEGRA234_CLK_DMIC3>;
+					assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <3072000>;
+					sound-name-prefix = "DMIC3";
+					status = "disabled";
+				};
+
+				tegra_dmic4: dmic@2904300 {
+					compatible = "nvidia,tegra234-dmic",
+						     "nvidia,tegra210-dmic";
+					reg = <0x2904300 0x100>;
+					clocks = <&bpmp TEGRA234_CLK_DMIC4>;
+					clock-names = "dmic";
+					assigned-clocks = <&bpmp TEGRA234_CLK_DMIC4>;
+					assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <3072000>;
+					sound-name-prefix = "DMIC4";
+					status = "disabled";
+				};
+
+				tegra_dspk1: dspk@2905000 {
+					compatible = "nvidia,tegra234-dspk",
+						     "nvidia,tegra186-dspk";
+					reg = <0x2905000 0x100>;
+					clocks = <&bpmp TEGRA234_CLK_DSPK1>;
+					clock-names = "dspk";
+					assigned-clocks = <&bpmp TEGRA234_CLK_DSPK1>;
+					assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <12288000>;
+					sound-name-prefix = "DSPK1";
+					status = "disabled";
+				};
+
+				tegra_dspk2: dspk@2905100 {
+					compatible = "nvidia,tegra234-dspk",
+						     "nvidia,tegra186-dspk";
+					reg = <0x2905100 0x100>;
+					clocks = <&bpmp TEGRA234_CLK_DSPK2>;
+					clock-names = "dspk";
+					assigned-clocks = <&bpmp TEGRA234_CLK_DSPK2>;
+					assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLA_OUT0>;
+					assigned-clock-rates = <12288000>;
+					sound-name-prefix = "DSPK2";
+					status = "disabled";
+				};
+
+				tegra_mvc1: mvc@290a000 {
+					compatible = "nvidia,tegra234-mvc",
+						     "nvidia,tegra210-mvc";
+					reg = <0x290a000 0x200>;
+					sound-name-prefix = "MVC1";
+					status = "disabled";
+				};
+
+				tegra_mvc2: mvc@290a200 {
+					compatible = "nvidia,tegra234-mvc",
+						     "nvidia,tegra210-mvc";
+					reg = <0x290a200 0x200>;
+					sound-name-prefix = "MVC2";
+					status = "disabled";
+				};
+
+				tegra_amixer: amixer@290bb00 {
+					compatible = "nvidia,tegra234-amixer",
+						     "nvidia,tegra210-amixer";
+					reg = <0x290bb00 0x800>;
+					sound-name-prefix = "MIXER1";
+					status = "disabled";
+				};
+
+				tegra_admaif: admaif@290f000 {
+					compatible = "nvidia,tegra234-admaif",
+						     "nvidia,tegra186-admaif";
+					reg = <0x0290f000 0x1000>;
+					dmas = <&adma 1>, <&adma 1>,
+					       <&adma 2>, <&adma 2>,
+					       <&adma 3>, <&adma 3>,
+					       <&adma 4>, <&adma 4>,
+					       <&adma 5>, <&adma 5>,
+					       <&adma 6>, <&adma 6>,
+					       <&adma 7>, <&adma 7>,
+					       <&adma 8>, <&adma 8>,
+					       <&adma 9>, <&adma 9>,
+					       <&adma 10>, <&adma 10>,
+					       <&adma 11>, <&adma 11>,
+					       <&adma 12>, <&adma 12>,
+					       <&adma 13>, <&adma 13>,
+					       <&adma 14>, <&adma 14>,
+					       <&adma 15>, <&adma 15>,
+					       <&adma 16>, <&adma 16>,
+					       <&adma 17>, <&adma 17>,
+					       <&adma 18>, <&adma 18>,
+					       <&adma 19>, <&adma 19>,
+					       <&adma 20>, <&adma 20>;
+					dma-names = "rx1", "tx1",
+						    "rx2", "tx2",
+						    "rx3", "tx3",
+						    "rx4", "tx4",
+						    "rx5", "tx5",
+						    "rx6", "tx6",
+						    "rx7", "tx7",
+						    "rx8", "tx8",
+						    "rx9", "tx9",
+						    "rx10", "tx10",
+						    "rx11", "tx11",
+						    "rx12", "tx12",
+						    "rx13", "tx13",
+						    "rx14", "tx14",
+						    "rx15", "tx15",
+						    "rx16", "tx16",
+						    "rx17", "tx17",
+						    "rx18", "tx18",
+						    "rx19", "tx19",
+						    "rx20", "tx20";
+					interconnects = <&mc TEGRA234_MEMORY_CLIENT_APEDMAR &emc>,
+							<&mc TEGRA234_MEMORY_CLIENT_APEDMAW &emc>;
+					interconnect-names = "dma-mem", "write";
+					iommus = <&smmu_niso0 TEGRA234_SID_APE>;
+					status = "disabled";
+				};
+			};
+
+			adma: dma-controller@2930000 {
+				compatible = "nvidia,tegra234-adma",
+					     "nvidia,tegra186-adma";
+				reg = <0x02930000 0x20000>;
+				interrupt-parent = <&agic>;
+				interrupts =  <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+					      <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+				#dma-cells = <1>;
+				clocks = <&bpmp TEGRA234_CLK_AHUB>;
+				clock-names = "d_audio";
+				status = "disabled";
+			};
+
+			agic: interrupt-controller@2a40000 {
+				compatible = "nvidia,tegra234-agic",
+					     "nvidia,tegra210-agic";
+				#interrupt-cells = <3>;
+				interrupt-controller;
+				reg = <0x02a41000 0x1000>,
+				      <0x02a42000 0x2000>;
+				interrupts = <GIC_SPI 145
+					      (GIC_CPU_MASK_SIMPLE(4) |
+					       IRQ_TYPE_LEVEL_HIGH)>;
+				clocks = <&bpmp TEGRA234_CLK_APE>;
+				clock-names = "clk";
+				status = "disabled";
+			};
+		};
+
 		misc@100000 {
 			compatible = "nvidia,tegra234-misc";
 			reg = <0x00100000 0xf000>,
@@ -144,6 +564,108 @@
 			status = "disabled";
 		};
 
+		gen1_i2c: i2c@3160000 {
+			compatible = "nvidia,tegra194-i2c";
+			reg = <0x3160000 0x100>;
+			status = "disabled";
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&bpmp TEGRA234_CLK_I2C1
+				  &bpmp TEGRA234_CLK_PLLP_OUT0>;
+			assigned-clocks = <&bpmp TEGRA234_CLK_I2C1>;
+			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			resets = <&bpmp TEGRA234_RESET_I2C1>;
+			reset-names = "i2c";
+		};
+
+		cam_i2c: i2c@3180000 {
+			compatible = "nvidia,tegra194-i2c";
+			reg = <0x3180000 0x100>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			clock-frequency = <400000>;
+			clocks = <&bpmp TEGRA234_CLK_I2C3
+				&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			assigned-clocks = <&bpmp TEGRA234_CLK_I2C3>;
+			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			resets = <&bpmp TEGRA234_RESET_I2C3>;
+			reset-names = "i2c";
+		};
+
+		dp_aux_ch1_i2c: i2c@3190000 {
+			compatible = "nvidia,tegra194-i2c";
+			reg = <0x3190000 0x100>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			clock-frequency = <100000>;
+			clocks = <&bpmp TEGRA234_CLK_I2C4
+				&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			assigned-clocks = <&bpmp TEGRA234_CLK_I2C4>;
+			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			resets = <&bpmp TEGRA234_RESET_I2C4>;
+			reset-names = "i2c";
+		};
+
+		dp_aux_ch0_i2c: i2c@31b0000 {
+			compatible = "nvidia,tegra194-i2c";
+			reg = <0x31b0000 0x100>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			clock-frequency = <100000>;
+			clocks = <&bpmp TEGRA234_CLK_I2C6
+				&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			assigned-clocks = <&bpmp TEGRA234_CLK_I2C6>;
+			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			resets = <&bpmp TEGRA234_RESET_I2C6>;
+			reset-names = "i2c";
+		};
+
+		dp_aux_ch2_i2c: i2c@31c0000 {
+			compatible = "nvidia,tegra194-i2c";
+			reg = <0x31c0000 0x100>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			clock-frequency = <100000>;
+			clocks = <&bpmp TEGRA234_CLK_I2C7
+				&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			assigned-clocks = <&bpmp TEGRA234_CLK_I2C7>;
+			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			resets = <&bpmp TEGRA234_RESET_I2C7>;
+			reset-names = "i2c";
+		};
+
+		dp_aux_ch3_i2c: i2c@31e0000 {
+			compatible = "nvidia,tegra194-i2c";
+			reg = <0x31e0000 0x100>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			clock-frequency = <100000>;
+			clocks = <&bpmp TEGRA234_CLK_I2C9
+				&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			assigned-clocks = <&bpmp TEGRA234_CLK_I2C9>;
+			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			resets = <&bpmp TEGRA234_RESET_I2C9>;
+			reset-names = "i2c";
+		};
+
+		pwm1: pwm@3280000 {
+			compatible = "nvidia,tegra194-pwm",
+				     "nvidia,tegra186-pwm";
+			reg = <0x3280000 0x10000>;
+			clocks = <&bpmp TEGRA234_CLK_PWM1>;
+			clock-names = "pwm";
+			resets = <&bpmp TEGRA234_RESET_PWM1>;
+			reset-names = "pwm";
+			status = "disabled";
+			#pwm-cells = <2>;
+		};
+
 		mmc@3460000 {
 			compatible = "nvidia,tegra234-sdhci", "nvidia,tegra186-sdhci";
 			reg = <0x03460000 0x20000>;
@@ -159,6 +681,7 @@
 			interconnects = <&mc TEGRA234_MEMORY_CLIENT_SDMMCRAB &emc>,
 					<&mc TEGRA234_MEMORY_CLIENT_SDMMCWAB &emc>;
 			interconnect-names = "dma-mem", "write";
+			iommus = <&smmu_niso1 TEGRA234_SID_SDMMC4>;
 			nvidia,pad-autocal-pull-up-offset-hs400 = <0x00>;
 			nvidia,pad-autocal-pull-down-offset-hs400 = <0x00>;
 			nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x0a>;
@@ -172,6 +695,23 @@
 			status = "disabled";
 		};
 
+		hda@3510000 {
+			compatible = "nvidia,tegra234-hda", "nvidia,tegra30-hda";
+			reg = <0x3510000 0x10000>;
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA234_CLK_AZA_BIT>,
+				 <&bpmp TEGRA234_CLK_AZA_2XBIT>;
+			clock-names = "hda", "hda2codec_2x";
+			resets = <&bpmp TEGRA234_RESET_HDA>,
+				 <&bpmp TEGRA234_RESET_HDACODEC>;
+			reset-names = "hda", "hda2codec_2x";
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_DISP>;
+			interconnects = <&mc TEGRA234_MEMORY_CLIENT_HDAR &emc>,
+					<&mc TEGRA234_MEMORY_CLIENT_HDAW &emc>;
+			interconnect-names = "dma-mem", "write";
+			status = "disabled";
+		};
+
 		fuse@3810000 {
 			compatible = "nvidia,tegra234-efuse";
 			reg = <0x03810000 0x10000>;
@@ -197,6 +737,148 @@
 			#mbox-cells = <2>;
 		};
 
+		smmu_niso1: iommu@8000000 {
+			compatible = "nvidia,tegra234-smmu", "nvidia,smmu-500";
+			reg = <0x8000000 0x1000000>,
+			      <0x7000000 0x1000000>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+			stream-match-mask = <0x7f80>;
+			#global-interrupts = <2>;
+			#iommu-cells = <1>;
+
+			nvidia,memory-controller = <&mc>;
+			status = "okay";
+		};
+
 		hsp_aon: hsp@c150000 {
 			compatible = "nvidia,tegra234-hsp", "nvidia,tegra194-hsp";
 			reg = <0x0c150000 0x90000>;
@@ -212,6 +894,37 @@
 			#mbox-cells = <2>;
 		};
 
+		gen2_i2c: i2c@c240000 {
+			compatible = "nvidia,tegra194-i2c";
+			reg = <0xc240000 0x100>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			clock-frequency = <100000>;
+			clocks = <&bpmp TEGRA234_CLK_I2C2
+				&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			assigned-clocks = <&bpmp TEGRA234_CLK_I2C2>;
+			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			resets = <&bpmp TEGRA234_RESET_I2C2>;
+			reset-names = "i2c";
+		};
+
+		gen8_i2c: i2c@c250000 {
+			compatible = "nvidia,tegra194-i2c";
+			reg = <0xc250000 0x100>;
+			nvidia,hw-instance-id = <0x7>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			clock-frequency = <400000>;
+			clocks = <&bpmp TEGRA234_CLK_I2C8
+				&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			assigned-clocks = <&bpmp TEGRA234_CLK_I2C8>;
+			assigned-clock-parents = <&bpmp TEGRA234_CLK_PLLP_OUT0>;
+			resets = <&bpmp TEGRA234_RESET_I2C8>;
+			reset-names = "i2c";
+		};
+
 		rtc@c2a0000 {
 			compatible = "nvidia,tegra234-rtc", "nvidia,tegra20-rtc";
 			reg = <0x0c2a0000 0x10000>;
@@ -261,6 +974,288 @@
 			#interrupt-cells = <3>;
 			interrupt-controller;
 		};
+
+		smmu_iso: iommu@10000000{
+			compatible = "nvidia,tegra234-smmu", "nvidia,smmu-500";
+			reg = <0x10000000 0x1000000>;
+			interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
+			stream-match-mask = <0x7f80>;
+			#global-interrupts = <1>;
+			#iommu-cells = <1>;
+
+			nvidia,memory-controller = <&mc>;
+			status = "okay";
+		};
+
+		smmu_niso0: iommu@12000000 {
+			compatible = "nvidia,tegra234-smmu", "nvidia,smmu-500";
+			reg = <0x12000000 0x1000000>,
+			      <0x11000000 0x1000000>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			stream-match-mask = <0x7f80>;
+			#global-interrupts = <2>;
+			#iommu-cells = <1>;
+
+			nvidia,memory-controller = <&mc>;
+			status = "okay";
+		};
 	};
 
 	sram@40000000 {
@@ -296,6 +1291,7 @@
 				<&mc TEGRA234_MEMORY_CLIENT_BPMPDMAR &emc>,
 				<&mc TEGRA234_MEMORY_CLIENT_BPMPDMAW &emc>;
 		interconnect-names = "read", "write", "dma-mem", "dma-write";
+		iommus = <&smmu_niso1 TEGRA234_SID_BPMP>;
 
 		bpmp_i2c: i2c {
 			compatible = "nvidia,tegra186-bpmp-i2c";
@@ -692,6 +1688,20 @@
 		status = "disabled";
 	};
 
+	sound {
+		status = "disabled";
+
+		clocks = <&bpmp TEGRA234_CLK_PLLA>,
+			 <&bpmp TEGRA234_CLK_PLLA_OUT0>;
+		clock-names = "pll_a", "plla_out0";
+		assigned-clocks = <&bpmp TEGRA234_CLK_PLLA>,
+				  <&bpmp TEGRA234_CLK_PLLA_OUT0>,
+				  <&bpmp TEGRA234_CLK_AUD_MCLK>;
+		assigned-clock-parents = <0>,
+					 <&bpmp TEGRA234_CLK_PLLA>,
+					 <&bpmp TEGRA234_CLK_PLLA_OUT0>;
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index f7232052d286..f9e6343acd03 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -18,10 +18,11 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-a5u-eur.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-j5.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-serranove.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-wingtech-wt88047.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-bullhead-rev-101.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-lg-bullhead-rev-10.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-lg-bullhead-rev-101.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-msft-lumia-octagon-talkman.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-xiaomi-libra.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= msm8994-angler-rev-101.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8994-huawei-angler-rev-101.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8994-msft-lumia-octagon-cityman.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8994-sony-xperia-kitakami-ivy.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8994-sony-xperia-kitakami-karin.dtb
@@ -82,7 +83,8 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-pompom-r3.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-pompom-r3-lte.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-r1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-r1-lte.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-herobrine.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-herobrine-herobrine-r0.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-herobrine-herobrine-r1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-idp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-idp2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7280-crd.dtb
@@ -90,6 +92,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sdm630-sony-xperia-ganges-kirin.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm630-sony-xperia-nile-discovery.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm630-sony-xperia-nile-pioneer.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm630-sony-xperia-nile-voyager.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm632-fairphone-fp3.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm636-sony-xperia-ganges-mermaid.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm660-xiaomi-lavender.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r1.dtb
@@ -103,7 +106,9 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-sony-xperia-tama-akari.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-sony-xperia-tama-akatsuki.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-sony-xperia-tama-apollo.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-xiaomi-beryllium.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-shift-axolotl.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm850-lenovo-yoga-c630.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm850-samsung-w737.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm6125-sony-xperia-seine-pdx201.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm6350-sony-xperia-lena-pdx213.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm7225-fairphone-fp4.dtb
@@ -121,4 +126,5 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sm8350-microsoft-surface-duo2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8350-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8350-sony-xperia-sagami-pdx214.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8350-sony-xperia-sagami-pdx215.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8450-hdk.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8450-qrd.dtb
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
index a5320d6d30e7..7c1eab605c15 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
@@ -253,7 +253,6 @@
 		port@0 {
 			reg = <0>;
 			csiphy0_ep: endpoint {
-				clock-lanes = <1>;
 				data-lanes = <0 2>;
 				remote-endpoint = <&ov5640_ep>;
 				status = "okay";
@@ -289,7 +288,6 @@
 
 		port {
 			ov5640_ep: endpoint {
-				clock-lanes = <1>;
 				data-lanes = <0 2>;
 				remote-endpoint = <&csiphy0_ep>;
 			};
@@ -351,12 +349,12 @@
 	pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>;
 	pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>;
 	pinctrl-names = "default", "sleep";
-	qcom,model = "DB410c";
-	qcom,audio-routing =
+	model = "DB410c";
+	audio-routing =
 		"AMIC2", "MIC BIAS Internal2",
 		"AMIC3", "MIC BIAS External1";
 
-	external-dai-link@0 {
+	quaternary-dai-link {
 		link-name = "ADV7533";
 		cpu {
 			sound-dai = <&lpass MI2S_QUATERNARY>;
@@ -366,7 +364,7 @@
 		};
 	};
 
-	internal-codec-playback-dai-link@0 {
+	primary-dai-link {
 		link-name = "WCD";
 		cpu {
 			sound-dai = <&lpass MI2S_PRIMARY>;
@@ -376,7 +374,7 @@
 		};
 	};
 
-	internal-codec-capture-dai-link@0 {
+	tertiary-dai-link {
 		link-name = "WCD-Capture";
 		cpu {
 			sound-dai = <&lpass MI2S_TERTIARY>;
diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index 66ec5615651d..4e7efa97724b 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -373,6 +373,8 @@
 
 		intc: interrupt-controller@b000000 {
 			compatible = "qcom,msm-qgic2";
+			#address-cells = <2>;
+			#size-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <0x3>;
 			reg =   <0x0 0x0b000000 0x0 0x1000>,  /*GICD*/
@@ -380,6 +382,13 @@
 				<0x0 0x0b001000 0x0 0x1000>,  /*GICH*/
 				<0x0 0x0b004000 0x0 0x1000>;  /*GICV*/
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			ranges = <0 0 0 0xb00a000 0 0xffd>;
+
+			v2m@0 {
+				compatible = "arm,gic-v2m-frame";
+				msi-controller;
+				reg = <0x0 0x0 0x0 0xffd>;
+			};
 		};
 
 		pcie_phy: phy@84000 {
@@ -425,6 +434,7 @@
 			linux,pci-domain = <0>;
 			bus-range = <0x00 0xff>;
 			num-lanes = <1>;
+			max-link-speed = <3>;
 			#address-cells = <3>;
 			#size-cells = <2>;
 
@@ -520,7 +530,6 @@
 			ranges;
 			compatible = "arm,armv7-timer-mem";
 			reg = <0x0 0x0b120000 0x0 0x1000>;
-			clock-frequency = <19200000>;
 
 			frame@b120000 {
 				frame-number = <0>;
@@ -748,7 +757,7 @@
 				snps,hird-threshold = /bits/ 8 <0x0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_u3_susphy_quirk;
-				snps,ref-clock-period-ns = <0x32>;
+				snps,ref-clock-period-ns = <0x29>;
 				dr_mode = "host";
 			};
 		};
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index e6cc261201ef..d80b1cefab10 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -76,6 +76,25 @@
 		method = "smc";
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		smem@4ab00000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x4ab00000 0x0 0x00100000>;
+			no-map;
+
+			hwlocks = <&tcsr_mutex 0>;
+		};
+
+		memory@4ac00000 {
+			no-map;
+			reg = <0x0 0x4ac00000 0x0 0x00400000>;
+		};
+	};
+
 	firmware {
 		scm {
 			compatible = "qcom,scm-ipq8074", "qcom,scm";
@@ -331,6 +350,12 @@
 			#reset-cells = <0x1>;
 		};
 
+		tcsr_mutex: hwlock@1905000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x01905000 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
 		spmi_bus: spmi@200f000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0x0200f000 0x001000>,
@@ -609,9 +634,18 @@
 
 		intc: interrupt-controller@b000000 {
 			compatible = "qcom,msm-qgic2";
+			#address-cells = <1>;
+			#size-cells = <1>;
 			interrupt-controller;
 			#interrupt-cells = <0x3>;
 			reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>;
+			ranges = <0 0xb00a000 0xffd>;
+
+			v2m@0 {
+				compatible = "arm,gic-v2m-frame";
+				msi-controller;
+				reg = <0x0 0xffd>;
+			};
 		};
 
 		timer {
@@ -636,7 +670,6 @@
 			ranges;
 			compatible = "arm,armv7-timer-mem";
 			reg = <0x0b120000 0x1000>;
-			clock-frequency = <19200000>;
 
 			frame@b120000 {
 				frame-number = <0>;
diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
index 852de624f5af..b3836dde8a54 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts
@@ -151,6 +151,21 @@
 		vddio-supply = <&pm8916_l6>;
 	};
 
+	light-sensor@23 {
+		compatible = "liteon,ltr559";
+		reg = <0x23>;
+		proximity-near-level = <75>;
+
+		interrupt-parent = <&msmgpio>;
+		interrupts = <115 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&light_int_default>;
+
+		vdd-supply = <&pm8916_l17>;
+		vio-supply = <&pm8916_l6>;
+	};
+
 	gyroscope@68 {
 		compatible = "bosch,bmg160";
 		reg = <0x68>;
@@ -392,6 +407,14 @@
 		bias-disable;
 	};
 
+	light_int_default: light-int-default {
+		pins = "gpio115";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	magn_int_default: magn-int-default {
 		pins = "gpio113";
 		function = "gpio";
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts
index 687bea438a57..6c408d61de75 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dts
@@ -41,7 +41,7 @@
 		};
 
 		home-key {
-			lable = "Home Key";
+			label = "Home Key";
 			gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_HOMEPAGE>;
 		};
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 41897eb3736a..0a0be43529f6 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -1731,8 +1731,10 @@
 					clock-names = "ref", "sleep";
 					resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>;
 					reset-names = "phy", "por";
-					qcom,init-seq = /bits/ 8 <0x0 0x44
-						0x1 0x6b 0x2 0x24 0x3 0x13>;
+					qcom,init-seq = /bits/ 8 <0x0 0x44>,
+								 <0x1 0x6b>,
+								 <0x2 0x24>,
+								 <0x3 0x13>;
 				};
 			};
 		};
diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi
new file mode 100644
index 000000000000..431228faacdd
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi
@@ -0,0 +1,1326 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/* Copyright (c) 2022, The Linux Foundation. All rights reserved. */
+
+#include <dt-bindings/clock/qcom,gcc-msm8953.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	clocks {
+		sleep_clk: sleep-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+
+		xo_board: xo-board {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <19200000>;
+			clock-output-names = "xo";
+		};
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&L2_0>;
+			#cooling-cells = <2>;
+
+			l1-icache {
+				compatible = "cache";
+			};
+			l1-dcache {
+				compatible = "cache";
+			};
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&L2_0>;
+			#cooling-cells = <2>;
+
+			l1-icache {
+				compatible = "cache";
+			};
+			l1-dcache {
+				compatible = "cache";
+			};
+		};
+
+		CPU2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&L2_0>;
+			#cooling-cells = <2>;
+
+			l1-icache {
+				compatible = "cache";
+			};
+			l1-dcache {
+				compatible = "cache";
+			};
+		};
+
+		CPU3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&L2_0>;
+			#cooling-cells = <2>;
+
+			l1-icache {
+				compatible = "cache";
+			};
+			l1-dcache {
+				compatible = "cache";
+			};
+		};
+
+		CPU4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x100>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&L2_1>;
+			#cooling-cells = <2>;
+
+			l1-icache {
+				compatible = "cache";
+			};
+			l1-dcache {
+				compatible = "cache";
+			};
+		};
+
+		CPU5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x101>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&L2_1>;
+			#cooling-cells = <2>;
+
+			l1-icache {
+				compatible = "cache";
+			};
+			l1-dcache {
+				compatible = "cache";
+			};
+		};
+
+		CPU6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x102>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&L2_1>;
+			#cooling-cells = <2>;
+
+			l1-icache {
+				compatible = "cache";
+			};
+			l1-dcache {
+				compatible = "cache";
+			};
+		};
+
+		CPU7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x103>;
+			enable-method = "psci";
+			capacity-dmips-mhz = <1024>;
+			next-level-cache = <&L2_1>;
+			#cooling-cells = <2>;
+
+			l1-icache {
+				compatible = "cache";
+			};
+			l1-dcache {
+				compatible = "cache";
+			};
+		};
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+				core1 {
+					cpu = <&CPU1>;
+				};
+				core2 {
+					cpu = <&CPU2>;
+				};
+				core3 {
+					cpu = <&CPU3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&CPU4>;
+				};
+				core1 {
+					cpu = <&CPU5>;
+				};
+				core2 {
+					cpu = <&CPU6>;
+				};
+				core3 {
+					cpu = <&CPU7>;
+				};
+			};
+		};
+
+		L2_0: l2-cache_0 {
+			compatible = "cache";
+			cache-level = <2>;
+		};
+
+		L2_1: l2-cache_1 {
+			compatible = "cache";
+			cache-level = <2>;
+		};
+	};
+
+	firmware {
+		scm: scm {
+			compatible = "qcom,scm-msm8953";
+			clocks = <&gcc GCC_CRYPTO_CLK>,
+				 <&gcc GCC_CRYPTO_AXI_CLK>,
+				 <&gcc GCC_CRYPTO_AHB_CLK>;
+			clock-names = "core", "bus", "iface";
+			#reset-cells = <1>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		/* We expect the bootloader to fill in the reg */
+		reg = <0 0 0 0>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		zap_shader_region: memory@81800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x81800000 0x0 0x2000>;
+			no-map;
+		};
+
+		memory@85b00000 {
+			reg = <0x0 0x85b00000 0x0 0x800000>;
+			no-map;
+		};
+
+		smem_mem: memory@86300000 {
+			compatible = "qcom,smem";
+			reg = <0x0 0x86300000 0x0 0x100000>;
+			qcom,rpm-msg-ram = <&rpm_msg_ram>;
+			hwlocks = <&tcsr_mutex 3>;
+			no-map;
+		};
+
+		memory@86400000 {
+			reg = <0x0 0x86400000 0x0 0x400000>;
+			no-map;
+		};
+
+		mpss_mem: memory@86c00000 {
+			reg = <0x0 0x86c00000 0x0 0x6a00000>;
+			no-map;
+		};
+
+		adsp_fw_mem: memory@8d600000 {
+			reg = <0x0 0x8d600000 0x0 0x1100000>;
+			no-map;
+		};
+
+		wcnss_fw_mem: memory@8e700000 {
+			reg = <0x0 0x8e700000 0x0 0x700000>;
+			no-map;
+		};
+
+		memory@90000000 {
+			reg = <0 0x90000000 0 0x1000>;
+			no-map;
+		};
+
+		memory@90001000 {
+			reg = <0x0 0x90001000 0x0 0x13ff000>;
+			no-map;
+		};
+
+		venus_mem: memory@91400000 {
+			reg = <0x0 0x91400000 0x0 0x700000>;
+			no-map;
+		};
+
+		mba_mem: memory@92000000 {
+			reg = <0x0 0x92000000 0x0 0x100000>;
+			no-map;
+		};
+
+		memory@f2d00000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0xf2d00000 0x0 0x180000>;
+			no-map;
+
+			qcom,client-id = <1>;
+		};
+	};
+
+	smd {
+		compatible = "qcom,smd";
+
+		rpm {
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			qcom,ipc = <&apcs 8 0>;
+			qcom,smd-edge = <15>;
+
+			rpm_requests: rpm_requests {
+				compatible = "qcom,rpm-msm8953";
+				qcom,smd-channels = "rpm_requests";
+
+				rpmcc: rpmcc {
+					compatible = "qcom,rpmcc-msm8953";
+					clocks = <&xo_board>;
+					clock-names = "xo";
+					#clock-cells = <1>;
+				};
+
+				rpmpd: power-controller {
+					compatible = "qcom,msm8953-rpmpd";
+					#power-domain-cells = <1>;
+					operating-points-v2 = <&rpmpd_opp_table>;
+
+					clocks = <&xo_board>;
+					clock-names = "ref";
+
+					rpmpd_opp_table: opp-table {
+						compatible = "operating-points-v2";
+
+						rpmpd_opp_ret: opp1 {
+							opp-level = <RPM_SMD_LEVEL_RETENTION>;
+						};
+
+						rpmpd_opp_ret_plus: opp2 {
+							opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
+						};
+
+						rpmpd_opp_min_svs: opp3 {
+							opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+						};
+
+						rpmpd_opp_low_svs: opp4 {
+							opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+						};
+
+						rpmpd_opp_svs: opp5 {
+							opp-level = <RPM_SMD_LEVEL_SVS>;
+						};
+
+						rpmpd_opp_svs_plus: opp6 {
+							opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+						};
+
+						rpmpd_opp_nom: opp7 {
+							opp-level = <RPM_SMD_LEVEL_NOM>;
+						};
+
+						rpmpd_opp_nom_plus: opp8 {
+							opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+						};
+
+						rpmpd_opp_turbo: opp9 {
+							opp-level = <RPM_SMD_LEVEL_TURBO>;
+						};
+					};
+				};
+			};
+		};
+	};
+
+	smsm {
+		compatible = "qcom,smsm";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		qcom,ipc-1 = <&apcs 8 13>;
+		qcom,ipc-3 = <&apcs 8 19>;
+
+		apps_smsm: apps@0 {
+			reg = <0>;
+
+			#qcom,smem-state-cells = <1>;
+		};
+	};
+
+	soc: soc@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0xffffffff>;
+		compatible = "simple-bus";
+
+		rpm_msg_ram: sram@60000 {
+			compatible = "qcom,rpm-msg-ram";
+			reg = <0x60000 0x8000>;
+		};
+
+		hsusb_phy: phy@79000 {
+			compatible = "qcom,msm8953-qusb2-phy";
+			reg = <0x79000 0x180>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_QUSB_REF_CLK>;
+			clock-names = "cfg_ahb", "ref";
+
+			qcom,tcsr-syscon = <&tcsr_phy_clk_scheme_sel>;
+
+			resets = <&gcc GCC_QUSB2_PHY_BCR>;
+
+			status = "disabled";
+		};
+
+		rng@e3000 {
+			compatible = "qcom,prng";
+			reg = <0x000e3000 0x1000>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+		};
+
+		tsens0: thermal-sensor@4a9000 {
+			compatible = "qcom,msm8953-tsens", "qcom,tsens-v2";
+			reg = <0x4a9000 0x1000>, /* TM */
+			      <0x4a8000 0x1000>; /* SROT */
+			#qcom,sensors = <16>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#thermal-sensor-cells = <1>;
+		};
+
+		restart@4ab000 {
+			compatible = "qcom,pshold";
+			reg = <0x4ab000 0x4>;
+		};
+
+		tlmm: pinctrl@1000000 {
+			compatible = "qcom,msm8953-pinctrl";
+			reg = <0x1000000 0x300000>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			gpio-ranges = <&tlmm 0 0 155>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			uart_console_active: uart-console-active-pins {
+				pins = "gpio4", "gpio5";
+				function = "blsp_uart2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			uart_console_sleep: uart-console-sleep-pins {
+				pins = "gpio4", "gpio5";
+				function = "blsp_uart2";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			sdc1_clk_on: sdc1-clk-on-pins {
+				pins = "sdc1_clk";
+				bias-disable;
+				drive-strength = <16>;
+			};
+
+			sdc1_clk_off: sdc1-clk-off-pins {
+				pins = "sdc1_clk";
+				bias-disable;
+				drive-strength = <2>;
+			};
+
+			sdc1_cmd_on: sdc1-cmd-on-pins {
+				pins = "sdc1_cmd";
+				bias-disable;
+				drive-strength = <10>;
+			};
+
+			sdc1_cmd_off: sdc1-cmd-off-pins {
+				pins = "sdc1_cmd";
+				bias-disable;
+				drive-strength = <2>;
+			};
+
+			sdc1_data_on: sdc1-data-on-pins {
+				pins = "sdc1_data";
+				bias-pull-up;
+				drive-strength = <10>;
+			};
+
+			sdc1_data_off: sdc1-data-off-pins {
+				pins = "sdc1_data";
+				bias-pull-up;
+				drive-strength = <2>;
+			};
+
+			sdc1_rclk_on: sdc1-rclk-on-pins {
+				pins = "sdc1_rclk";
+				bias-pull-down;
+			};
+
+			sdc1_rclk_off: sdc1-rclk-off-pins {
+				pins = "sdc1_rclk";
+				bias-pull-down;
+			};
+
+			sdc2_clk_on: sdc2-clk-on-pins {
+				pins = "sdc2_clk";
+				drive-strength = <16>;
+				bias-disable;
+			};
+
+			sdc2_clk_off: sdc2-clk-off-pins {
+				pins = "sdc2_clk";
+				bias-disable;
+				drive-strength = <2>;
+			};
+
+			sdc2_cmd_on: sdc2-cmd-on-pins {
+				pins = "sdc2_cmd";
+				bias-pull-up;
+				drive-strength = <10>;
+			};
+
+			sdc2_cmd_off: sdc2-cmd-off-pins {
+				pins = "sdc2_cmd";
+				bias-pull-up;
+				drive-strength = <2>;
+			};
+
+			sdc2_data_on: sdc2-data-on-pins {
+				pins = "sdc2_data";
+				bias-pull-up;
+				drive-strength = <10>;
+			};
+
+			sdc2_data_off: sdc2-data-off-pins {
+				pins = "sdc2_data";
+				bias-pull-up;
+				drive-strength = <2>;
+			};
+
+			sdc2_cd_on: cd-on-pins {
+				pins = "gpio133";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			sdc2_cd_off: cd-off-pins {
+				pins = "gpio133";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			gpio_key_default: gpio-key-default-pins {
+				pins = "gpio85";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
+			i2c_1_default: i2c-1-default-pins {
+				pins = "gpio2", "gpio3";
+				function = "blsp_i2c1";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c_1_sleep: i2c-1-sleep-pins {
+				pins = "gpio2", "gpio3";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c_2_default: i2c-2-default-pins {
+				pins = "gpio6", "gpio7";
+				function = "blsp_i2c2";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c_2_sleep: i2c-2-sleep-pins {
+				pins = "gpio6", "gpio7";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c_3_default: i2c-3-default-pins {
+				pins = "gpio10", "gpio11";
+				function = "blsp_i2c3";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c_3_sleep: i2c-3-sleep-pins {
+				pins = "gpio10", "gpio11";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c_4_default: i2c-4-default-pins {
+				pins = "gpio14", "gpio15";
+				function = "blsp_i2c4";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c_4_sleep: i2c-4-sleep-pins {
+				pins = "gpio14", "gpio15";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c_5_default: i2c-5-default-pins {
+				pins = "gpio18", "gpio19";
+				function = "blsp_i2c5";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c_5_sleep: i2c-5-sleep-pins {
+				pins = "gpio18", "gpio19";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c_6_default: i2c-6-default-pins {
+				pins = "gpio22", "gpio23";
+				function = "blsp_i2c6";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c_6_sleep: i2c-6-sleep-pins {
+				pins = "gpio22", "gpio23";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c_7_default: i2c-7-default-pins {
+				pins = "gpio135", "gpio136";
+				function = "blsp_i2c7";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c_7_sleep: i2c-7-sleep-pins {
+				pins = "gpio135", "gpio136";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c_8_default: i2c-8-default-pins {
+				pins = "gpio98", "gpio99";
+				function = "blsp_i2c8";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			i2c_8_sleep: i2c-8-sleep-pins {
+				pins = "gpio98", "gpio99";
+				function = "gpio";
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+
+		gcc: clock-controller@1800000 {
+			compatible = "qcom,gcc-msm8953";
+			reg = <0x1800000 0x80000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clocks = <&xo_board>,
+				 <&sleep_clk>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+			clock-names = "xo",
+				      "sleep",
+				      "dsi0pll",
+				      "dsi0pllbyte",
+				      "dsi1pll",
+				      "dsi1pllbyte";
+		};
+
+		tcsr_mutex: hwlock@1905000 {
+			compatible = "qcom,tcsr-mutex";
+			reg = <0x1905000 0x20000>;
+			#hwlock-cells = <1>;
+		};
+
+		tcsr: syscon@1937000 {
+			compatible = "qcom,tcsr-msm8953", "syscon";
+			reg = <0x1937000 0x30000>;
+		};
+
+		tcsr_phy_clk_scheme_sel: syscon@193f044 {
+			compatible = "syscon";
+			reg = <0x193f044 0x4>;
+		};
+
+		spmi_bus: spmi@200f000 {
+			compatible = "qcom,spmi-pmic-arb";
+			reg = <0x200f000 0x1000>,
+			      <0x2400000 0x800000>,
+			      <0x2c00000 0x800000>,
+			      <0x3800000 0x200000>,
+			      <0x200a000 0x2100>;
+			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+			interrupt-names = "periph_irq";
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			qcom,ee = <0>;
+			qcom,channel = <0>;
+			interrupt-controller;
+
+			#interrupt-cells = <4>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+		};
+
+		usb3: usb@70f8800 {
+			compatible = "qcom,msm8953-dwc3", "qcom,dwc3";
+			reg = <0x70f8800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hs_phy_irq", "ss_phy_irq";
+
+			clocks = <&gcc GCC_USB_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_USB30_MASTER_CLK>,
+				 <&gcc GCC_PCNOC_USB3_AXI_CLK>,
+				 <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+				 <&gcc GCC_USB30_SLEEP_CLK>;
+			clock-names = "cfg_noc", "core", "iface",
+				      "mock_utmi", "sleep";
+
+			assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <133330000>;
+
+			power-domains = <&gcc USB30_GDSC>;
+
+			qcom,select-utmi-as-pipe-clk;
+
+			status = "disabled";
+
+			usb3_dwc3: usb@7000000 {
+				compatible = "snps,dwc3";
+				reg = <0x07000000 0xcc00>;
+				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&hsusb_phy>;
+				phy-names = "usb2-phy";
+
+				snps,usb2-gadget-lpm-disable;
+				snps,dis-u1-entry-quirk;
+				snps,dis-u2-entry-quirk;
+				snps,is-utmi-l1-suspend;
+				snps,hird-threshold = /bits/ 8 <0x00>;
+
+				maximum-speed = "high-speed";
+				phy_mode = "utmi";
+			};
+		};
+
+		sdhc_1: sdhci@7824900 {
+			compatible = "qcom,msm8953-sdhci", "qcom,sdhci-msm-v4";
+
+			reg = <0x7824900 0x500>, <0x7824000 0x800>;
+			reg-names = "hc_mem", "core_mem";
+
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "core", "xo";
+
+			power-domains = <&rpmpd MSM8953_VDDCX>;
+			operating-points-v2 = <&sdhc1_opp_table>;
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>;
+			pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>;
+
+			mmc-hs400-1_8v;
+			mmc-hs200-1_8v;
+			mmc-ddr-1_8v;
+			bus-width = <8>;
+			non-removable;
+
+			status = "disabled";
+
+			sdhc1_opp_table: opp-table-sdhc1 {
+				compatible = "operating-points-v2";
+
+				opp-25000000 {
+					opp-hz = /bits/ 64 <25000000>;
+					required-opps = <&rpmpd_opp_low_svs>;
+				};
+
+				opp-50000000 {
+					opp-hz = /bits/ 64 <50000000>;
+					required-opps = <&rpmpd_opp_svs>;
+				};
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmpd_opp_svs>;
+				};
+
+				opp-192000000 {
+					opp-hz = /bits/ 64 <192000000>;
+					required-opps = <&rpmpd_opp_nom>;
+				};
+
+				opp-384000000 {
+					opp-hz = /bits/ 64 <384000000>;
+					required-opps = <&rpmpd_opp_nom>;
+				};
+			};
+		};
+
+		sdhc_2: sdhci@7864900 {
+			compatible = "qcom,msm8953-sdhci", "qcom,sdhci-msm-v4";
+
+			reg = <0x7864900 0x500>, <0x7864000 0x800>;
+			reg-names = "hc_mem", "core_mem";
+
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq", "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+				 <&gcc GCC_SDCC2_APPS_CLK>,
+				 <&xo_board>;
+			clock-names = "iface", "core", "xo";
+
+			power-domains = <&rpmpd MSM8953_VDDCX>;
+			operating-points-v2 = <&sdhc2_opp_table>;
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>;
+			pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
+
+			bus-width = <4>;
+
+			status = "disabled";
+
+			sdhc2_opp_table: opp-table-sdhc2 {
+				compatible = "operating-points-v2";
+
+				opp-25000000 {
+					opp-hz = /bits/ 64 <25000000>;
+					required-opps = <&rpmpd_opp_low_svs>;
+				};
+
+				opp-50000000 {
+					opp-hz = /bits/ 64 <50000000>;
+					required-opps = <&rpmpd_opp_svs>;
+				};
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmpd_opp_svs>;
+				};
+
+				opp-177770000 {
+					opp-hz = /bits/ 64 <177770000>;
+					required-opps = <&rpmpd_opp_nom>;
+				};
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					required-opps = <&rpmpd_opp_nom>;
+				};
+			};
+		};
+
+		uart_0: serial@78af000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x78af000 0x200>;
+			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+
+			status = "disabled";
+		};
+
+		i2c_1: i2c@78b5000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x78b5000 0x600>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "iface", "core";
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+				 <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>;
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c_1_default>;
+			pinctrl-1 = <&i2c_1_sleep>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		i2c_2: i2c@78b6000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x78b6000 0x600>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "iface", "core";
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+				 <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c_2_default>;
+			pinctrl-1 = <&i2c_2_sleep>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		i2c_3: i2c@78b7000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x78b7000 0x600>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "iface", "core";
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+				 <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c_3_default>;
+			pinctrl-1 = <&i2c_3_sleep>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		i2c_4: i2c@78b8000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x78b8000 0x600>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "iface", "core";
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+				 <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c_4_default>;
+			pinctrl-1 = <&i2c_4_sleep>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		i2c_5: i2c@7af5000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x7af5000 0x600>;
+			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "iface", "core";
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>,
+				 <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c_5_default>;
+			pinctrl-1 = <&i2c_5_sleep>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		i2c_6: i2c@7af6000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x7af6000 0x600>;
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "iface", "core";
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>,
+				 <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c_6_default>;
+			pinctrl-1 = <&i2c_6_sleep>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		i2c_7: i2c@7af7000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x7af7000 0x600>;
+			interrupts = <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "iface", "core";
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>,
+				 <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c_7_default>;
+			pinctrl-1 = <&i2c_7_sleep>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		i2c_8: i2c@7af8000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x7af8000 0x600>;
+			interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "iface", "core";
+			clocks = <&gcc GCC_BLSP2_AHB_CLK>,
+				 <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>;
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c_8_default>;
+			pinctrl-1 = <&i2c_8_sleep>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		intc: interrupt-controller@b000000 {
+			compatible = "qcom,msm-qgic2";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>;
+		};
+
+		apcs: mailbox@b011000 {
+			compatible = "qcom,msm8953-apcs-kpss-global", "syscon";
+			reg = <0xb011000 0x1000>;
+			#mbox-cells = <1>;
+		};
+
+		timer@b120000 {
+			compatible = "arm,armv7-timer-mem";
+			reg = <0xb120000 0x1000>;
+			#address-cells = <0x01>;
+			#size-cells = <0x01>;
+			ranges;
+
+			frame@b121000 {
+				frame-number = <0>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xb121000 0x1000>,
+				      <0xb122000 0x1000>;
+			};
+
+			frame@b123000 {
+				frame-number = <1>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xb123000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b124000 {
+				frame-number = <2>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xb124000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b125000 {
+				frame-number = <3>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xb125000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b126000 {
+				frame-number = <4>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xb126000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b127000 {
+				frame-number = <5>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xb127000 0x1000>;
+				status = "disabled";
+			};
+
+			frame@b128000 {
+				frame-number = <6>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0xb128000 0x1000>;
+				status = "disabled";
+			};
+		};
+	};
+
+	thermal-zones {
+		cpu0-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens0 9>;
+			trips {
+				cpu0_alert: trip-point0 {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu0_crit: crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu0_alert>;
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+		cpu1-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens0 10>;
+			trips {
+				cpu1_alert: trip-point0 {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu1_crit: crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu1_alert>;
+					cooling-device = <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+		cpu2-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens0 11>;
+			trips {
+				cpu2_alert: trip-point0 {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu2_crit: crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu2_alert>;
+					cooling-device = <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+		cpu3-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens0 12>;
+			trips {
+				cpu3_alert: trip-point0 {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu3_crit: crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu3_alert>;
+					cooling-device = <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+		cpu4-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens0 4>;
+			trips {
+				cpu4_alert: trip-point0 {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu4_crit: crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu4_alert>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+		cpu5-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens0 5>;
+			trips {
+				cpu5_alert: trip-point0 {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu5_crit: crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu5_alert>;
+					cooling-device = <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+		cpu6-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens0 6>;
+			trips {
+				cpu6_alert: trip-point0 {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu6_crit: crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu6_alert>;
+					cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+		cpu7-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&tsens0 7>;
+			trips {
+				cpu7_alert: trip-point0 {
+					temperature = <80000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu7_crit: crit {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu7_alert>;
+					cooling-device = <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-10.dts b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-10.dts
new file mode 100644
index 000000000000..7e6bce4af441
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-10.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* Copyright (c) Jean Thomas <virgule@jeanthomas.me>
+ */
+
+/dts-v1/;
+
+#include "msm8992-lg-bullhead.dtsi"
+
+/ {
+	model = "LG Nexus 5X rev 1.0";
+
+	/* required for bootloader to select correct board */
+	qcom,board-id = <0xa64 0>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-101.dts
new file mode 100644
index 000000000000..e6a5ebd30e2f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead-rev-101.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* Copyright (c) Jean Thomas <virgule@jeanthomas.me>
+ */
+
+/dts-v1/;
+
+#include "msm8992-lg-bullhead.dtsi"
+
+/ {
+	model = "LG Nexus 5X rev 1.01";
+
+	/* required for bootloader to select correct board */
+	qcom,board-id = <0xb64 0>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi
index 4da6c44bf532..3b0cc85d6674 100644
--- a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
+++ b/arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi
@@ -18,9 +18,7 @@
 	compatible = "lg,bullhead", "qcom,msm8992";
 	chassis-type = "handset";
 
-	/* required for bootloader to select correct board */
 	qcom,msm-id = <251 0>, <252 0>;
-	qcom,board-id = <0xb64 0>;
 	qcom,pmic-id = <0x10009 0x1000A 0x0 0x0>;
 
 	/* Bullhead firmware doesn't support PSCI */
diff --git a/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts
index 0e3dd48f0dbf..0e3dd48f0dbf 100644
--- a/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts
+++ b/arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts
diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi
index 5a9a5ed0565f..8c1dc5155b71 100644
--- a/arch/arm64/boot/dts/qcom/msm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi
@@ -444,7 +444,7 @@
 		};
 
 		sdhc1: sdhci@f9824900 {
-			compatible = "qcom,sdhci-msm-v4";
+			compatible = "qcom,msm8994-sdhci", "qcom,sdhci-msm-v4";
 			reg = <0xf9824900 0x1a0>, <0xf9824000 0x800>;
 			reg-names = "hc_mem", "core_mem";
 
@@ -467,7 +467,7 @@
 		};
 
 		sdhc2: sdhci@f98a4900 {
-			compatible = "qcom,sdhci-msm-v4";
+			compatible = "qcom,msm8994-sdhci", "qcom,sdhci-msm-v4";
 			reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
 			reg-names = "hc_mem", "core_mem";
 
@@ -713,6 +713,9 @@
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
 			reg = <0xfc400000 0x2000>;
+
+			clock-names = "xo", "sleep_clk";
+			clocks = <&xo_board>, <&sleep_clk>;
 		};
 
 		rpm_msg_ram: sram@fc428000 {
diff --git a/arch/arm64/boot/dts/qcom/msm8996-mtp.dts b/arch/arm64/boot/dts/qcom/msm8996-mtp.dts
index 7d9fc35bc7a0..6a1699a96c99 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/msm8996-mtp.dts
@@ -9,7 +9,7 @@
 
 / {
 	model = "Qualcomm Technologies, Inc. MSM 8996 MTP";
-	compatible = "qcom,msm8996-mtp";
+	compatible = "qcom,msm8996-mtp", "qcom,msm8996";
 
 	aliases {
 		serial0 = &blsp2_uart2;
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 91bc974aeb0a..f0f81c23c16f 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -134,7 +134,7 @@
 		};
 	};
 
-	cluster0_opp: opp_table0 {
+	cluster0_opp: opp-table-cluster0 {
 		compatible = "operating-points-v2-kryo-cpu";
 		nvmem-cells = <&speedbin_efuse>;
 		opp-shared;
@@ -222,7 +222,7 @@
 		};
 	};
 
-	cluster1_opp: opp_table1 {
+	cluster1_opp: opp-table-cluster1 {
 		compatible = "operating-points-v2-kryo-cpu";
 		nvmem-cells = <&speedbin_efuse>;
 		opp-shared;
@@ -679,8 +679,10 @@
 			#power-domain-cells = <1>;
 			reg = <0x00300000 0x90000>;
 
-			clocks = <&rpmcc RPM_SMD_LN_BB_CLK>;
-			clock-names = "cxo2";
+			clocks = <&rpmcc RPM_SMD_BB_CLK1>,
+				 <&rpmcc RPM_SMD_LN_BB_CLK>,
+				 <&sleep_clk>;
+			clock-names = "cxo", "cxo2", "sleep_clk";
 		};
 
 		tsens0: thermal-sensor@4a9000 {
@@ -713,7 +715,7 @@
 			clock-names = "bam_clk";
 			#dma-cells = <1>;
 			qcom,ee = <0>;
-			qcom,controlled-remotely = <1>;
+			qcom,controlled-remotely;
 		};
 
 		crypto: crypto@67a000 {
@@ -887,7 +889,7 @@
 				#clock-cells = <1>;
 				#phy-cells = <0>;
 
-				clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>;
+				clocks = <&mmcc MDSS_AHB_CLK>, <&rpmcc RPM_SMD_BB_CLK1>;
 				clock-names = "iface", "ref";
 				status = "disabled";
 			};
@@ -1546,7 +1548,7 @@
 			reg = <0x00290000 0x10000>;
 		};
 
-		spmi_bus: qcom,spmi@400f000 {
+		spmi_bus: spmi@400f000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0x0400f000 0x1000>,
 			      <0x04400000 0x800000>,
@@ -2593,7 +2595,7 @@
 			reg = <0x06400000 0x90000>;
 
 			clock-names = "xo";
-			clocks = <&xo_board>;
+			clocks = <&rpmcc RPM_SMD_BB_CLK1>;
 
 			#clock-cells = <1>;
 		};
@@ -2693,7 +2695,7 @@
 		};
 
 		sdhc1: sdhci@7464900 {
-			compatible = "qcom,sdhci-msm-v4";
+			compatible = "qcom,msm8996-sdhci", "qcom,sdhci-msm-v4";
 			reg = <0x07464900 0x11c>, <0x07464000 0x800>;
 			reg-names = "hc_mem", "core_mem";
 
@@ -2704,7 +2706,7 @@
 			clock-names = "iface", "core", "xo";
 			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
 				<&gcc GCC_SDCC1_APPS_CLK>,
-				<&xo_board>;
+				<&rpmcc RPM_SMD_BB_CLK1>;
 
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&sdc1_state_on>;
@@ -2716,7 +2718,7 @@
 		};
 
 		sdhc2: sdhci@74a4900 {
-			compatible = "qcom,sdhci-msm-v4";
+			compatible = "qcom,msm8996-sdhci", "qcom,sdhci-msm-v4";
 			reg = <0x074a4900 0x314>, <0x074a4000 0x800>;
 			reg-names = "hc_mem", "core_mem";
 
@@ -2727,7 +2729,7 @@
 			clock-names = "iface", "core", "xo";
 			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
 				<&gcc GCC_SDCC2_APPS_CLK>,
-				<&xo_board>;
+				<&rpmcc RPM_SMD_BB_CLK1>;
 
 			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&sdc2_state_on>;
@@ -3028,7 +3030,7 @@
 			interrupt-names = "wdog", "fatal", "ready",
 					  "handover", "stop-ack";
 
-			clocks = <&xo_board>;
+			clocks = <&rpmcc RPM_SMD_BB_CLK1>;
 			clock-names = "xo";
 
 			memory-region = <&adsp_region>;
@@ -3054,7 +3056,7 @@
 					power-domains = <&gcc HLOS1_VOTE_LPASS_ADSP_GDSC>;
 					compatible = "qcom,apr-v2";
 					qcom,smd-channels = "apr_audio_svc";
-					qcom,apr-domain = <APR_DOMAIN_ADSP>;
+					qcom,domain = <APR_DOMAIN_ADSP>;
 					#address-cells = <1>;
 					#size-cells = <0>;
 
@@ -3273,7 +3275,7 @@
 			};
 		};
 
-		gpu-thermal-top {
+		gpu-top-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
@@ -3295,7 +3297,7 @@
 			};
 		};
 
-		gpu-thermal-bottom {
+		gpu-bottom-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index f273bc1ff629..2fda21e810c9 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -138,15 +138,9 @@
 			cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
 			next-level-cache = <&L2_0>;
 			L2_0: l2-cache {
-				compatible = "arm,arch-cache";
+				compatible = "cache";
 				cache-level = <2>;
 			};
-			L1_I_0: l1-icache {
-				compatible = "arm,arch-cache";
-			};
-			L1_D_0: l1-dcache {
-				compatible = "arm,arch-cache";
-			};
 		};
 
 		CPU1: cpu@1 {
@@ -157,12 +151,6 @@
 			capacity-dmips-mhz = <1024>;
 			cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
 			next-level-cache = <&L2_0>;
-			L1_I_1: l1-icache {
-				compatible = "arm,arch-cache";
-			};
-			L1_D_1: l1-dcache {
-				compatible = "arm,arch-cache";
-			};
 		};
 
 		CPU2: cpu@2 {
@@ -173,12 +161,6 @@
 			capacity-dmips-mhz = <1024>;
 			cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
 			next-level-cache = <&L2_0>;
-			L1_I_2: l1-icache {
-				compatible = "arm,arch-cache";
-			};
-			L1_D_2: l1-dcache {
-				compatible = "arm,arch-cache";
-			};
 		};
 
 		CPU3: cpu@3 {
@@ -189,12 +171,6 @@
 			capacity-dmips-mhz = <1024>;
 			cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
 			next-level-cache = <&L2_0>;
-			L1_I_3: l1-icache {
-				compatible = "arm,arch-cache";
-			};
-			L1_D_3: l1-dcache {
-				compatible = "arm,arch-cache";
-			};
 		};
 
 		CPU4: cpu@100 {
@@ -206,15 +182,9 @@
 			cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
 			next-level-cache = <&L2_1>;
 			L2_1: l2-cache {
-				compatible = "arm,arch-cache";
+				compatible = "cache";
 				cache-level = <2>;
 			};
-			L1_I_100: l1-icache {
-				compatible = "arm,arch-cache";
-			};
-			L1_D_100: l1-dcache {
-				compatible = "arm,arch-cache";
-			};
 		};
 
 		CPU5: cpu@101 {
@@ -225,12 +195,6 @@
 			capacity-dmips-mhz = <1536>;
 			cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
 			next-level-cache = <&L2_1>;
-			L1_I_101: l1-icache {
-				compatible = "arm,arch-cache";
-			};
-			L1_D_101: l1-dcache {
-				compatible = "arm,arch-cache";
-			};
 		};
 
 		CPU6: cpu@102 {
@@ -241,12 +205,6 @@
 			capacity-dmips-mhz = <1536>;
 			cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
 			next-level-cache = <&L2_1>;
-			L1_I_102: l1-icache {
-				compatible = "arm,arch-cache";
-			};
-			L1_D_102: l1-dcache {
-				compatible = "arm,arch-cache";
-			};
 		};
 
 		CPU7: cpu@103 {
@@ -257,12 +215,6 @@
 			capacity-dmips-mhz = <1536>;
 			cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
 			next-level-cache = <&L2_1>;
-			L1_I_103: l1-icache {
-				compatible = "arm,arch-cache";
-			};
-			L1_D_103: l1-dcache {
-				compatible = "arm,arch-cache";
-			};
 		};
 
 		cpu-map {
@@ -674,7 +626,7 @@
 			};
 		};
 
-		gpu-thermal-bottom {
+		gpu-bottom-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
@@ -689,7 +641,7 @@
 			};
 		};
 
-		gpu-thermal-top {
+		gpu-top-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
diff --git a/arch/arm64/boot/dts/qcom/pm6150l.dtsi b/arch/arm64/boot/dts/qcom/pm6150l.dtsi
index 3ca2860bb0cf..7aa2ef90cb6a 100644
--- a/arch/arm64/boot/dts/qcom/pm6150l.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm6150l.dtsi
@@ -52,5 +52,15 @@
 		reg = <0x5 SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+
+		pm6150l_wled: leds@d800 {
+			compatible = "qcom,pm6150l-wled";
+			reg = <0xd800>, <0xd900>;
+			interrupts = <0x5 0xd8 0x1 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "ovp";
+			label = "backlight";
+
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/qcom/pm8953.dtsi b/arch/arm64/boot/dts/qcom/pm8953.dtsi
new file mode 100644
index 000000000000..741c538a9cee
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8953.dtsi
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/* Copyright (c) 2022, The Linux Foundation. All rights reserved. */
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+	pmic@0 {
+		compatible = "qcom,pm8953", "qcom,spmi-pmic";
+		reg = <0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8953_pon: pon@800 {
+			compatible = "qcom,pm8916-pon";
+			reg = <0x800>;
+			mode-bootloader = <0x2>;
+			mode-recovery = <0x1>;
+
+			pwrkey {
+				compatible = "qcom,pm8941-pwrkey";
+				interrupts = <0x00 0x08 0 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				linux,code = <KEY_POWER>;
+			};
+
+			pm8953_resin: resin {
+				compatible = "qcom,pm8941-resin";
+				interrupts = <0x00 0x08 1 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				status = "disabled";
+			};
+		};
+
+		temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400>;
+			interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
+			io-channels = <&pm8953_vadc VADC_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8953_vadc: vadc@3100 {
+			compatible = "qcom,spmi-vadc";
+			reg = <0x3100>;
+			interrupts = <0x00 0x31 0x00 0x01>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+
+			adc-chan@8 {
+				reg = <VADC_DIE_TEMP>;
+			};
+			adc-chan@9 {
+				reg = <VADC_REF_625MV>;
+			};
+			adc-chan@a {
+				reg = <VADC_REF_1250MV>;
+			};
+			adc-chan@c {
+				reg = <VADC_SPARE1>;
+			};
+			adc-chan@e {
+				reg = <VADC_GND_REF>;
+			};
+			adc-chan@f {
+				reg = <VADC_VDD_VADC>;
+			};
+		};
+
+		rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>, <0x6100>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+		};
+	};
+
+	pmic@1 {
+		compatible = "qcom,pm8953", "qcom,spmi-pmic";
+		reg = <1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/pms405.dtsi b/arch/arm64/boot/dts/qcom/pms405.dtsi
index 172be177fc8f..98d173a377d5 100644
--- a/arch/arm64/boot/dts/qcom/pms405.dtsi
+++ b/arch/arm64/boot/dts/qcom/pms405.dtsi
@@ -32,7 +32,7 @@
 
 &spmi_bus {
 	pms405_0: pms405@0 {
-		compatible = "qcom,spmi-pmic";
+		compatible = "qcom,pms405", "qcom,spmi-pmic";
 		reg = <0x0 SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -139,7 +139,7 @@
 	};
 
 	pms405_1: pms405@1 {
-		compatible = "qcom,spmi-pmic";
+		compatible = "qcom,pms405", "qcom,spmi-pmic";
 		reg = <0x1 SPMI_USID>;
 
 		pms405_spmi_regulators: regulators {
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index 6db753b49326..3f06f7cd3cf2 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -110,7 +110,7 @@
 		};
 	};
 
-	cpu_opp_table: cpu-opp-table {
+	cpu_opp_table: opp-table-cpu {
 		compatible = "operating-points-v2-kryo-cpu";
 		opp-shared;
 
@@ -128,7 +128,7 @@
 		};
 	};
 
-	cpr_opp_table: cpr-opp-table {
+	cpr_opp_table: opp-table-cpr {
 		compatible = "operating-points-v2-qcom-level";
 
 		cpr_opp1: opp1 {
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
index 14ed09f30a73..c81805ef2250 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
@@ -142,6 +142,22 @@ ap_ts_pen_1v8: &i2c4 {
 	};
 };
 
+&pp1800_uf_cam {
+	status = "okay";
+};
+
+&pp1800_wf_cam {
+	status = "okay";
+};
+
+&pp2800_uf_cam {
+	status = "okay";
+};
+
+&pp2800_wf_cam {
+	status = "okay";
+};
+
 &pp3300_dx_edp {
 	gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>;
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
index f32369af1351..bff2b556cc75 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi
@@ -146,6 +146,22 @@ ap_ts_pen_1v8: &i2c4 {
 	};
 };
 
+&pp1800_uf_cam {
+	status = "okay";
+};
+
+&pp1800_wf_cam {
+	status = "okay";
+};
+
+&pp2800_uf_cam {
+	status = "okay";
+};
+
+&pp2800_wf_cam {
+	status = "okay";
+};
+
 &pp3300_dx_edp {
 	gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>;
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index bd5909ffb3dc..732e1181af48 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -144,6 +144,100 @@
 		vin-supply = <&ppvar_sys>;
 	};
 
+	pp1800_ec:
+	pp1800_sensors:
+	pp1800_ldo: pp1800-ldo-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_ldo";
+
+		/* EC turns on with hibernate_l; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		/*
+		 * Actually should be pp1800_h1 but we don't have any need to
+		 * model that so we use the parent of pp1800_h1.
+		 */
+		vin-supply = <&pp3300_a>;
+	};
+
+	pp1800_uf_cam: pp1800-uf-cam-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_uf_cam";
+		status = "disabled";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uf_cam_en>;
+
+		vin-supply = <&pp1800_ldo>;
+		regulator-enable-ramp-delay = <1000>;
+	};
+
+	pp1800_wf_cam: pp1800-wf-cam-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_wf_cam";
+		status = "disabled";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wf_cam_en>;
+
+		vin-supply = <&pp1800_ldo>;
+		regulator-enable-ramp-delay = <1000>;
+	};
+
+	pp2800_uf_cam: pp2800-uf-cam-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp2800_uf_cam";
+		status = "disabled";
+
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+
+		gpio = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		/*
+		 * The pinconf can only be referenced once so we put it on the
+		 * first regulator and comment it out here.
+		 * pinctrl-names = "default";
+		 * pinctrl-0 = <&uf_cam_en>;
+		 */
+
+		vin-supply = <&pp3300_a>;
+	};
+
+	pp2800_vcm_wf_cam:
+	pp2800_wf_cam: pp2800-wf-cam-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp2800_wf_cam";
+		status = "disabled";
+
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+
+		gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		/*
+		 * The pinconf can only be referenced once so we put it on the
+		 * first regulator and comment it out here.
+		 * pinctrl-names = "default";
+		 * pinctrl-0 = <&wf_cam_en>;
+		 */
+
+		vin-supply = <&pp3300_a>;
+	};
+
 	pp3300_audio:
 	pp3300_codec: pp3300-codec-regulator {
 		compatible = "regulator-fixed";
@@ -190,7 +284,7 @@
 		vin-supply = <&pp3300_a>;
 	};
 
-	pp3300_hub: pp3300-hub {
+	pp3300_hub: pp3300-hub-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "pp3300_hub";
 
@@ -543,7 +637,7 @@
 		pinctrl-0 = <&ap_ec_int_l>;
 		spi-max-frequency = <3000000>;
 
-		cros_ec_pwm: ec-pwm {
+		cros_ec_pwm: pwm {
 			compatible = "google,cros-ec-pwm";
 			#pwm-cells = <1>;
 		};
@@ -1521,4 +1615,32 @@ ap_spi_fp: &spi10 {
 			drive-strength = <2>;
 		};
 	};
+
+	uf_cam_en: uf-cam-en {
+		pinmux {
+			pins = "gpio6";
+			function = "gpio";
+		};
+
+		pinconf {
+			pins = "gpio6";
+			drive-strength = <2>;
+			/* External pull down */
+			bias-disable;
+		};
+	};
+
+	wf_cam_en: wf-cam-en {
+		pinmux {
+			pins = "gpio7";
+			function = "gpio";
+		};
+
+		pinconf {
+			pins = "gpio7";
+			drive-strength = <2>;
+			/* External pull down */
+			bias-disable;
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 2151cd8c8c7a..e1c46b80f14a 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -1459,6 +1459,8 @@
 					     "imem",
 					     "config";
 
+			qcom,qmp = <&aoss_qmp>;
+
 			qcom,smem-states = <&ipa_smp2p_out 0>,
 					   <&ipa_smp2p_out 1>;
 			qcom,smem-state-names = "ipa-clock-enabled-valid",
diff --git a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
new file mode 100644
index 000000000000..9f4a9c263c35
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sc7280 fragment for devices with Chrome bootloader
+ *
+ * This file mainly tries to abstract out the memory protections put into
+ * place by the Chrome bootloader which are different than what's put into
+ * place by Qualcomm's typical bootloader. It also has a smattering of other
+ * things that will hold true for any conceivable Chrome design
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/*
+ * Reserved memory changes
+ *
+ * Delete all unused memory nodes and define the peripheral memory regions
+ * required by the setup for Chrome boards.
+ */
+
+/delete-node/ &hyp_mem;
+/delete-node/ &xbl_mem;
+/delete-node/ &reserved_xbl_uefi_log;
+/delete-node/ &sec_apps_mem;
+
+/ {
+	reserved-memory {
+		adsp_mem: memory@86700000 {
+			reg = <0x0 0x86700000 0x0 0x2800000>;
+			no-map;
+		};
+
+		camera_mem: memory@8ad00000 {
+			reg = <0x0 0x8ad00000 0x0 0x500000>;
+			no-map;
+		};
+
+		venus_mem: memory@8b200000 {
+			reg = <0x0 0x8b200000 0x0 0x500000>;
+			no-map;
+		};
+
+		mpss_mem: memory@8b800000 {
+			reg = <0x0 0x8b800000 0x0 0xf600000>;
+			no-map;
+		};
+
+		wpss_mem: memory@9ae00000 {
+			reg = <0x0 0x9ae00000 0x0 0x1900000>;
+			no-map;
+		};
+
+		mba_mem: memory@9c700000 {
+			reg = <0x0 0x9c700000 0x0 0x200000>;
+			no-map;
+		};
+	};
+};
+
+/* The PMIC PON code isn't compatible w/ how Chrome EC/BIOS handle things. */
+&pmk8350_pon {
+	status = "disabled";
+};
+
+/*
+ * Chrome designs always boot from SPI flash hooked up to the qspi.
+ *
+ * It's expected that all boards will support "dual SPI" at 37.5 MHz.
+ * If some boards need a different speed or have a package that allows
+ * Quad SPI together with WP then those boards can easily override.
+ */
+&qspi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data01>;
+
+	spi_flash: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+
+		spi-max-frequency = <37500000>;
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
+	};
+};
+
+/* Modem setup is different on Chrome setups than typical Qualcomm setup */
+&remoteproc_mpss {
+	status = "okay";
+	compatible = "qcom,sc7280-mss-pil";
+	iommus = <&apps_smmu 0x124 0x0>, <&apps_smmu 0x488 0x7>;
+	memory-region = <&mba_mem>, <&mpss_mem>;
+};
+
+/* Increase the size from 2.5MB to 8MB */
+&rmtfs_mem {
+	reg = <0x0 0x9c900000 0x0 0x800000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-crd.dts
index cd2755ce530d..e2efbdde53a3 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-crd.dts
@@ -23,6 +23,18 @@
 	};
 };
 
+&apps_rsc {
+	pmg1110-regulators {
+		compatible = "qcom,pmg1110-rpmh-regulators";
+		qcom,pmic-id = "k";
+
+		vreg_s1k_1p0: smps1 {
+			regulator-min-microvolt = <1010000>;
+			regulator-max-microvolt = <1170000>;
+		};
+	};
+};
+
 ap_tp_i2c: &i2c0 {
 	status = "okay";
 	clock-frequency = <400000>;
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts
new file mode 100644
index 000000000000..1779d96c30f6
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r0.dts
@@ -0,0 +1,1352 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Herobrine board device tree source
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "sc7280.dtsi"
+
+/* PMICs depend on spmi_bus label and so must come after SoC */
+#include "pm7325.dtsi"
+#include "pm8350c.dtsi"
+#include "pmk8350.dtsi"
+
+#include "sc7280-chrome-common.dtsi"
+
+/ {
+	model = "Google Herobrine (rev0)";
+	compatible = "google,herobrine-rev0", "qcom,sc7280";
+};
+
+/ {
+	aliases {
+		serial0 = &uart5;
+		serial1 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	/* FIXED REGULATORS - parents above children */
+
+	/* This is the top level supply and variable voltage */
+	ppvar_sys: ppvar-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "ppvar_sys";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* This divides ppvar_sys by 2, so voltage is variable */
+	src_vph_pwr: src-vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "src_vph_pwr";
+
+		/* EC turns on with switchcap_on; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	pp5000_s3: pp5000-s3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp5000_s3";
+
+		/* EC turns on with en_pp5000_s3; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	pp3300_z1: pp3300-z1-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_z1";
+
+		/* EC turns on with en_pp3300_z1; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		vin-supply = <&ppvar_sys>;
+	};
+
+	pp3300_audio:
+	pp3300_codec: pp3300-codec-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_codec";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&en_pp3300_codec>;
+
+		vin-supply = <&pp3300_z1>;
+	};
+
+	pp3300_cam:
+	pp3300_edp:
+	pp3300_ts: pp3300-edp-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_edp";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 80 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&en_pp3300_dx_edp>;
+
+		vin-supply = <&pp3300_z1>;
+	};
+
+	pp3300_fp:
+	pp3300_fp_ls:
+	pp3300_mcu: pp3300-fp-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_fp";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		regulator-boot-on;
+		regulator-always-on;
+
+		/*
+		 * WARNING: it is intentional that GPIO 42 isn't listed here.
+		 * The userspace script for updating the fingerprint firmware
+		 * needs to control the FP regulators during a FW update,
+		 * hence the signal can't be owned by the kernel regulator.
+		 */
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&en_fp_rails>;
+
+		vin-supply = <&pp3300_z1>;
+	};
+
+	pp3300_hub: pp3300-hub-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_hub";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		regulator-boot-on;
+		regulator-always-on;
+
+		gpio = <&tlmm 24 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&en_pp3300_hub>;
+
+		vin-supply = <&pp3300_z1>;
+	};
+
+	pp3300_tp: pp3300-tp-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp3300_tp";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		/* AP turns on with PP1800_L18B_S0; always on for AP */
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&pp3300_z1>;
+	};
+
+	pp2850_uf_cam: pp2850-uf-cam-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp2850_uf_cam";
+
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+
+		gpio = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&uf_cam_en>;
+
+		vin-supply = <&pp3300_cam>;
+	};
+
+	pp2850_vcm_wf_cam: pp2850-vcm-wf-cam-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp2850_vcm_wf_cam";
+
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+
+		gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wf_cam_en>;
+
+		vin-supply = <&pp3300_cam>;
+	};
+
+	pp2850_wf_cam: pp2850-wf-cam-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp2850_wf_cam";
+
+		regulator-min-microvolt = <2850000>;
+		regulator-max-microvolt = <2850000>;
+
+		gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		/*
+		 * The pinconf can only be referenced once so we put it on the
+		 * first regulator and comment it out here.
+		 *
+		 * pinctrl-names = "default";
+		 * pinctrl-0 = <&wf_cam_en>;
+		 */
+
+		vin-supply = <&pp3300_cam>;
+	};
+
+	pp1800_fp: pp1800-fp-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_fp";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		regulator-boot-on;
+		regulator-always-on;
+
+		/*
+		 * WARNING: it is intentional that GPIO 42 isn't listed here.
+		 * The userspace script for updating the fingerprint firmware
+		 * needs to control the FP regulators during a FW update,
+		 * hence the signal can't be owned by the kernel regulator.
+		 */
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&en_fp_rails>;
+
+		vin-supply = <&pp1800_l18b_s0>;
+		status = "disabled";
+	};
+
+	pp1800_uf_cam: pp1800-uf-cam-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_uf_cam";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		/*
+		 * The pinconf can only be referenced once so we put it on the
+		 * first regulator and comment it out here.
+		 *
+		 * pinctrl-names = "default";
+		 * pinctrl-0 = <&uf_cam_en>;
+		 */
+
+		vin-supply = <&pp1800_l19b>;
+	};
+
+	pp1800_wf_cam: pp1800-wf-cam-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1800_wf_cam";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		/*
+		 * The pinconf can only be referenced once so we put it on the
+		 * first regulator and comment it out here.
+		 *
+		 * pinctrl-names = "default";
+		 * pinctrl-0 = <&wf_cam_en>;
+		 */
+
+		vin-supply = <&pp1800_l19b>;
+	};
+
+	pp1200_wf_cam: pp1200-wf-cam-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "pp1200_wf_cam";
+
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+
+		gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		/*
+		 * The pinconf can only be referenced once so we put it on the
+		 * first regulator and comment it out here.
+		 *
+		 * pinctrl-names = "default";
+		 * pinctrl-0 = <&wf_cam_en>;
+		 */
+
+		vin-supply = <&pp1200_l6b>;
+	};
+
+	/* BOARD-SPECIFIC TOP LEVEL NODES */
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		status = "disabled";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pen_pdct_l>;
+
+		pen_insert: pen-insert {
+			label = "Pen Insert";
+
+			/* Insert = low, eject = high */
+			gpios = <&tlmm 39 GPIO_ACTIVE_LOW>;
+			linux,code = <SW_PEN_INSERTED>;
+			linux,input-type = <EV_SW>;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	pwmleds {
+		compatible = "pwm-leds";
+		status = "disabled";
+		keyboard_backlight: keyboard-backlight {
+			status = "disabled";
+			label = "cros_ec::kbd_backlight";
+			pwms = <&cros_ec_pwm 0>;
+			max-brightness = <1023>;
+		};
+	};
+};
+
+&apps_rsc {
+	pm7325-regulators {
+		compatible = "qcom,pm7325-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd19_pmu_pcie_i:
+		vdd19_pmu_rfa_i:
+		vreg_s1b_wlan:
+		vreg_s1b: smps1 {
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vdd_pmu_aon_i:
+		vreg_s7b_wlan:
+		vreg_s7b: smps7 {
+			regulator-min-microvolt = <535000>;
+			regulator-max-microvolt = <1120000>;
+		};
+
+		vdd13_pmu_pcie_i:
+		vdd13_pmu_rfa_i:
+		vreg_s8b_wlan:
+		vreg_s8b: smps8 {
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1500000>;
+		};
+
+		vdda_usb_ss_dp_core:
+		vreg_l1b: ldo1 {
+			regulator-min-microvolt = <825000>;
+			regulator-max-microvolt = <925000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_usb_hs0_3p1:
+		vreg_l2b: ldo2 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pp1200_l6b:
+		vdd_ufs_1p2:
+		vdd_vref:
+		vdda_csi01_1p2:
+		vdda_csi23_1p2:
+		vdda_csi4_1p2:
+		vdda_dsi0_1p2:
+		vdda_pcie0_1p2:
+		vdda_pcie1_1p2:
+		vdda_usb_ss_dp_1p2:
+		vdda_qlink0_1p2_ck:
+		vdda_qlink1_1p2_ck:
+		vreg_l6b_1p2:
+		vreg_l6b: ldo6 {
+			regulator-min-microvolt = <1120000>;
+			regulator-max-microvolt = <1408000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pp2950_l7b:
+		vreg_l7b: ldo7 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		codec_vcc:
+		pp1800_l18b_s0:
+		pp1800_ts:
+		vdd1:
+		vddpx_0:
+		vddpx_3:
+		vddpx_7:
+		vreg_l18b: ldo18 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pp1800_l19b:
+		vddpx_ts:
+		vddpx_wl4otp:
+		vreg_l19b: ldo19 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	pm8350c-regulators {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vreg_s1c: smps1 {
+			regulator-min-microvolt = <2190000>;
+			regulator-max-microvolt = <2210000>;
+		};
+
+		vddpx_1:
+		vreg_s9c: smps9 {
+			regulator-min-microvolt = <1010000>;
+			regulator-max-microvolt = <1170000>;
+		};
+
+		pp1800_l1c:
+		pp1800_pen:
+		vdd_a_gfx_cs_1p1:
+		vdd_a_cxo_1p8:
+		vdd_qfprom:
+		vdda_apc_cs_1p8:
+		vdda_qrefs_1p8:
+		vdda_turing_q6_cs_1p8:
+		vdda_usb_hs0_1p8:
+		vreg_l1c: ldo1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		dmic_vdd:
+		pp1800_alc5682:
+		pp1800_l2c:
+		pp1800_vreg_alc5682:
+		vreg_l2c: ldo2 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pp3300_sar:
+		pp3300_sensor:
+		vreg_l3c: ldo3 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3540000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		ppvar_uim1:
+		vddpx_5:
+		vreg_l4c: ldo4 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pp2950_l5c:
+		uim_vcc:
+		vddpx_6:
+		vreg_l5c: ldo5 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		ppvar_l6c:
+		vddpx_2:
+		vreg_l6c: ldo6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c: ldo7 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pp1800_prox:
+		pp1800_sar:
+		vreg_l8c: ldo8 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pp2950_l9c:
+		vreg_l9c: ldo9 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_a_gnss_0p9:
+		vdd_ufs_core:
+		vdd_usb_hs0_core:
+		vdd_vref_0p9:
+		vdda_csi01_0p9:
+		vdda_csi23_0p9:
+		vdda_csi4_0p9:
+		vdda_dsi0_pll_0p9:
+		vdda_dsi0_0p9:
+		vdda_pcie0_core:
+		vdda_pcie1_core:
+		vdda_qlink0_0p9:
+		vdda_qlink1_0p9:
+		vdda_qlink0_0p9_ck:
+		vdda_qlink1_0p9_ck:
+		vdda_qrefs_0p875:
+		vreg_l10c_0p8:
+		vreg_l10c: ldo10 {
+			regulator-min-microvolt = <720000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pp2800_l11c:
+		vreg_l11c: ldo11 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pp1800_l12c:
+		vreg_l12c: ldo12 {
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		pp3300_l13c:
+		vreg_l13c: ldo13 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+	};
+};
+
+ap_tp_i2c: &i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	trackpad: trackpad@15 {
+		compatible = "elan,ekth3000";
+		reg = <0x15>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tp_int_odl>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <102 IRQ_TYPE_EDGE_FALLING>;
+
+		vcc-supply = <&pp3300_z1>;
+
+		wakeup-source;
+	};
+};
+
+ap_h1_i2c: &i2c12 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tpm@50 {
+		compatible = "google,cr50";
+		reg = <0x50>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&h1_ap_int_odl>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <54 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+ap_ts_pen: &i2c13 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	ap_ts: touchscreen@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <81 IRQ_TYPE_LEVEL_LOW>;
+
+		post-power-on-delay-ms = <20>;
+		hid-descr-addr = <0x0001>;
+
+		vdd-supply = <&pp3300_ts>;
+	};
+};
+
+&pm7325_gpios {
+	status = "disabled"; /* No GPIOs are connected */
+};
+
+&pmk8350_gpios {
+	status = "disabled"; /* No GPIOs are connected */
+};
+
+&pmk8350_rtc {
+	status = "disabled";
+};
+
+&pmk8350_vadc {
+	pmk8350_die_temp {
+		reg = <PMK8350_ADC7_DIE_TEMP>;
+		label = "pmk8350_die_temp";
+		qcom,pre-scaling = <1 1>;
+	};
+
+	pmr735a_die_temp {
+		reg = <PMR735A_ADC7_DIE_TEMP>;
+		label = "pmr735a_die_temp";
+		qcom,pre-scaling = <1 1>;
+	};
+};
+
+&qfprom {
+	vcc-supply = <&vdd_qfprom>;
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&sdhc_1 {
+	status = "okay";
+
+	vmmc-supply = <&pp2950_l7b>;
+	vqmmc-supply = <&pp1800_l19b>;
+};
+
+&sdhc_2 {
+	status = "okay";
+
+	pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>, <&sd_cd>;
+	pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>, <&sd_cd>;
+	vmmc-supply = <&pp2950_l9c>;
+	vqmmc-supply = <&ppvar_l6c>;
+
+	cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>;
+};
+
+ap_ec_spi: &spi8 {
+	status = "okay";
+
+	pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs_gpio_init_high>, <&qup_spi8_cs_gpio>;
+	cs-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
+
+	cros_ec: ec@0 {
+		compatible = "google,cros-ec-spi";
+		reg = <0>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <142 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ap_ec_int_l>;
+		spi-max-frequency = <3000000>;
+
+		cros_ec_pwm: pwm {
+			compatible = "google,cros-ec-pwm";
+			#pwm-cells = <1>;
+		};
+
+		i2c_tunnel: i2c-tunnel {
+			compatible = "google,cros-ec-i2c-tunnel";
+			google,remote-bus = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		typec {
+			compatible = "google,cros-ec-typec";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			usb_c0: connector@0 {
+				compatible = "usb-c-connector";
+				reg = <0>;
+				label = "left";
+				power-role = "dual";
+				data-role = "host";
+				try-power-role = "source";
+			};
+
+			usb_c1: connector@1 {
+				compatible = "usb-c-connector";
+				reg = <1>;
+				label = "right";
+				power-role = "dual";
+				data-role = "host";
+				try-power-role = "source";
+			};
+		};
+	};
+};
+
+#include <arm/cros-ec-keyboard.dtsi>
+#include <arm/cros-ec-sbs.dtsi>
+
+&keyboard_controller {
+	function-row-physmap = <
+		MATRIX_KEY(0x00, 0x02, 0)	/* T1 */
+		MATRIX_KEY(0x03, 0x02, 0)	/* T2 */
+		MATRIX_KEY(0x02, 0x02, 0)	/* T3 */
+		MATRIX_KEY(0x01, 0x02, 0)	/* T4 */
+		MATRIX_KEY(0x03, 0x04, 0)	/* T5 */
+		MATRIX_KEY(0x02, 0x04, 0)	/* T6 */
+		MATRIX_KEY(0x01, 0x04, 0)	/* T7 */
+		MATRIX_KEY(0x02, 0x09, 0)	/* T8 */
+		MATRIX_KEY(0x01, 0x09, 0)	/* T9 */
+		MATRIX_KEY(0x00, 0x04, 0)	/* T10 */
+	>;
+	linux,keymap = <
+		MATRIX_KEY(0x00, 0x02, KEY_BACK)
+		MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
+		MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
+		MATRIX_KEY(0x01, 0x02, KEY_SCALE)
+		MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
+		MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
+		MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
+		MATRIX_KEY(0x02, 0x09, KEY_MUTE)
+		MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
+		MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
+
+		CROS_STD_MAIN_KEYMAP
+	>;
+};
+
+&uart5 {
+	compatible = "qcom,geni-debug-uart";
+	status = "okay";
+};
+
+&uart7 {
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+
+	vdda-pll-supply = <&vdd_usb_hs0_core>;
+	vdda33-supply = <&vdda_usb_hs0_3p1>;
+	vdda18-supply = <&vdda_usb_hs0_1p8>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vdda_usb_ss_dp_1p2>;
+	vdda-pll-supply = <&vdda_usb_ss_dp_core>;
+};
+
+&usb_2 {
+	status = "okay";
+};
+
+&usb_2_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_2_hsphy {
+	status = "okay";
+
+	vdda-pll-supply = <&vdd_usb_hs0_core>;
+	vdda33-supply = <&vdda_usb_hs0_3p1>;
+	vdda18-supply = <&vdda_usb_hs0_1p8>;
+};
+
+/* PINCTRL - additions to nodes defined in sc7280.dtsi */
+
+&dp_hot_plug_det {
+	bias-disable;
+};
+
+&pcie1_clkreq_n {
+	bias-pull-up;
+	drive-strength = <2>;
+};
+
+&qspi_cs0 {
+	bias-disable;
+};
+
+&qspi_clk {
+	bias-disable;
+};
+
+&qspi_data01 {
+	/* High-Z when no transfers; nice to park the lines */
+	bias-pull-up;
+};
+
+&qup_uart5_rx {
+	drive-strength = <2>;
+	bias-pull-up;
+};
+
+&qup_uart5_tx {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_uart7_cts {
+	/*
+	 * Configure a pull-down on CTS to match the pull of
+	 * the Bluetooth module.
+	 */
+	bias-pull-down;
+};
+
+&qup_uart7_rts {
+	/* We'll drive RTS, so no pull */
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_uart7_tx {
+	/* We'll drive TX, so no pull */
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_uart7_rx {
+	/*
+	 * Configure a pull-up on RX. This is needed to avoid
+	 * garbage data when the TX pin of the Bluetooth module is
+	 * in tri-state (module powered off or not driving the
+	 * signal yet).
+	 */
+	bias-pull-up;
+};
+
+&sdc1_clk {
+	bias-disable;
+	drive-strength = <16>;
+};
+
+&sdc1_cmd {
+	bias-pull-up;
+	drive-strength = <10>;
+};
+
+&sdc1_data {
+	bias-pull-up;
+	drive-strength = <10>;
+};
+
+&sdc1_rclk {
+	bias-pull-down;
+};
+
+&sdc2_clk {
+	bias-disable;
+	drive-strength = <16>;
+};
+
+&sdc2_cmd {
+	bias-pull-up;
+	drive-strength = <10>;
+};
+
+&sdc2_data {
+	bias-pull-up;
+	drive-strength = <10>;
+};
+
+/* PINCTRL - board-specific pinctrl */
+
+&pm8350c_gpios {
+	gpio-line-names = "AP_SUSPEND",
+			  "",
+			  "",
+			  "AP_BL_EN",
+			  "",
+			  "SD_CD_ODL",
+			  "",
+			  "",
+			  "AP_BL_PWM";
+
+	ap_bl_en: ap-bl-en {
+		pins = "gpio4";
+		function = "normal";
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+		bias-disable;
+
+		/* Force backlight to be disabled to match state at boot. */
+		output-low;
+	};
+};
+
+&tlmm {
+	gpio-line-names = "HP_I2C_SDA",			/* 0 */
+			  "HP_I2C_SCL",
+			  "SSD_RST_L",
+			  "PE_WAKE_ODL",
+			  "AP_TP_I2C_SDA",
+			  "AP_TP_I2C_SCL",
+			  "UF_CAM_EN",
+			  "WF_CAM_EN",
+			  "AP_SAR_SENSOR_SDA",
+			  "AP_SAR_SENSOR_SCL",
+
+			  "",				/* 10 */
+			  "",
+			  "AP_SPI_MOSI",
+			  "AP_SPI_MISO",
+			  "AP_SPI_CLK",
+			  "AP_SPI_CS0_L",
+			  "",
+			  "",
+			  "EDP_HPD",
+			  "",
+
+			  "UF_CAM_RST_L",		/* 20 */
+			  "WF_CAM_RST_L",
+			  "UART_AP_TX_DBG_RX",
+			  "UART_DBG_TX_AP_RX",
+			  "EN_PP3300_HUB",
+			  "",
+			  "HOST2WLAN_SOL",
+			  "WLAN2HOST_SOL",
+			  "BT_UART_CTS",
+			  "BT_UART_RTS",
+
+			  "BT_UART_TXD",		/* 30 */
+			  "BT_UART_RXD",
+			  "AP_EC_SPI_MISO",
+			  "AP_EC_SPI_MOSI",
+			  "AP_EC_SPI_CLK",
+			  "AP_EC_SPI_CS_L",
+			  "",
+			  "",
+			  "",
+			  "PEN_PDCT_L",
+
+			  "IO_BRD_ID0",			/* 40 */
+			  "IO_BRD_ID1",
+			  "EN_FP_RAILS",
+			  "PEN_IRQ_L",
+			  "AP_SPI_FP_MISO",
+			  "AP_SPI_FP_MOSI",
+			  "AP_SPI_FP_CLK",
+			  "AP_SPI_FP_CS_L",
+			  "AP_H1_SPI_MISO",
+			  "AP_H1_SPI_MOSI",
+
+			  "AP_H1_SPI_CLK",		/* 50 */
+			  "AP_H1_SPI_CS_L",
+			  "AP_TS_PEN_I2C_SDA",
+			  "AP_TS_PEN_I2C_SCL",
+			  "H1_AP_INT_ODL",
+			  "",
+			  "LCM_RST_1V8_L",
+			  "AMP_EN",
+			  "",
+			  "DP_HOT_PLUG_DET",
+
+			  "HUB_RST_L",			/* 60 */
+			  "FP_TO_AP_IRQ_L",
+			  "",
+			  "",
+			  "UF_CAM_MCLK",
+			  "WF_CAM_MCLK",
+			  "IO_BRD_ID2",
+			  "EN_PP3300_CODEC",
+			  "EC_IN_RW_ODL",
+			  "UF_CAM_SDA",
+
+			  "UF_CAM_SCL",			/* 70 */
+			  "WF_CAM_SDA",
+			  "WF_CAM_SCL",
+			  "AP_BRD_ID0",
+			  "AP_BRD_ID1",
+			  "AP_BRD_ID2",
+			  "",
+			  "FPMCU_BOOT0",
+			  "FP_RST_L",
+			  "PE_CLKREQ_ODL",
+
+			  "EN_EDP_PP3300",		/* 80 */
+			  "TS_INT_L",
+			  "FORCE_USB_BOOT",
+			  "WCD_RST_L",
+			  "WLAN_EN",
+			  "BT_EN",
+			  "WLAN_SW_CTRL",
+			  "PCIE0_RESET_L",
+			  "PCIE0_CLK_REQ_L",
+			  "PCIE0_WAKE_L",
+
+			  "AS_EN",			/* 90 */
+			  "SD_CD_ODL",
+			  "",
+			  /*
+			   * AP_FLASH_WP_L is crossystem ABI. Schematics
+			   * call it BIOS_FLASH_WP_L.
+			   */
+			  "AP_FLASH_WP_L",
+			  "BT_WLAN_SB_CLK",
+			  "BT_WLAN_SB_DATA",
+			  "HP_MCLK",
+			  "HP_BCLK",
+			  "HP_DOUT",
+			  "HP_DIN",
+
+			  "HP_LRCLK",			/* 100 */
+			  "HP_IRQ",
+			  "TP_INT_ODL",
+			  "",
+			  "IO_SKU_ID2",
+			  "TS_RESET_L",
+			  "AMP_BCLK",
+			  "AMP_DIN",
+			  "AMP_LRCLK",
+			  "UIM2_DATA",
+
+			  "UIM2_CLK",			/* 110 */
+			  "UIM2_RST",
+			  "UIM2_PRESENT",
+			  "UIM1_DATA",
+			  "UIM1_CLK",
+			  "UIM1_RST",
+			  "",
+			  "RFFE0_CLK",
+			  "RFFE0_DATA/BOOT_CONFIG_0",
+			  "RFFE1_CLK",
+
+			  "RFFE1_DATA/BOOT_CONFIG_1",	/* 120 */
+			  "RFFE2_CLK",
+			  "RFFE2_DATA/BOOT_CONFIG_2",
+			  "RFFE3_CLK",
+			  "RFFE3_DATA/BOOT_CONFIG_3",
+			  "RFFE4_CLK",
+			  "RFFE4_DATA",
+			  "WCI2_LTE_COEX_RXD",
+			  "WCI2_LTE_COEX_TXD",
+			  "IO_SKU_ID0",
+
+			  "IO_SKU_ID1",			/* 130 */
+			  "",
+			  "",
+			  "QLINK0_REQ",
+			  "QLINK0_EN",
+			  "QLINK0_WMSS_RESET_L",
+			  "QLINK1_REQ",
+			  "QLINK1_EN",
+			  "QLINK1_WMSS_RESET_L",
+			  "FORCED_USB_BOOT_POL",
+
+			  "",				/* 140 */
+			  "P_SENSOR_INT_L",
+			  "AP_EC_INT_L",
+			  "",
+			  "WCD_SWR_TX_CLK",
+			  "WCD_SWR_TX_DATA_0",
+			  "WCD_SWR_TX_DATA_1",
+			  "WCD_SWR_RX_CLK",
+			  "WCD_SWR_RX_DATA_0",
+			  "WCD_SWR_RX_DATA_1",
+
+			  "",				/* 150 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "WCD_SWR_TX_DATA_2",
+			  "",
+
+			  "",				/* 160 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "",				/* 170 */
+			  "SENS_UART_TXD",
+			  "SENS_UART_RXD",
+			  "",
+			  "",
+			  "";
+
+	/*
+	 * pinctrl settings for pins that have no real owners.
+	 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&bios_flash_wp_l>;
+
+	amp_en: amp-en {
+		pins = "gpio57";
+		function = "gpio";
+		bias-pull-down;
+	};
+
+	ap_ec_int_l: ap-ec-int-l {
+		pins = "gpio142";
+		input-enable;
+		bias-pull-up;
+	};
+
+	bios_flash_wp_l: bios-flash-wp-l {
+		pins = "gpio93";
+		function = "gpio";
+		input-enable;
+		bias-disable;
+	};
+
+	bt_en: bt-en {
+		pins = "gpio85";
+		function = "gpio";
+		drive-strength = <2>;
+		output-low;
+		bias-pull-down;
+	};
+
+	en_fp_rails: en-fp-rails {
+		pins = "gpio42";
+		drive-strength = <2>;
+		output-high;
+		bias-disable;
+	};
+
+	en_pp3300_codec: en-pp3300-codec {
+		pins = "gpio67";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	en_pp3300_dx_edp: en-pp3300-dx-edp {
+		pins = "gpio80";
+		function = "gpio";
+		drive-strength = <2>;
+		/* Has external pulldown */
+		bias-disable;
+	};
+
+	en_pp3300_hub: en-pp3300-hub {
+		pins = "gpio24";
+		function = "gpio";
+		drive-strength = <2>;
+		/* Has external pulldown */
+		bias-disable;
+	};
+
+	fp_to_ap_irq_l: fp-to-ap-irq-l {
+		pins = "gpio61";
+		function = "gpio";
+		input-enable;
+		/* Has external pullup */
+		bias-disable;
+	};
+
+	h1_ap_int_odl: h1-ap-int-odl {
+		pins = "gpio54";
+		function = "gpio";
+		input-enable;
+		bias-pull-up;
+	};
+
+	hp_irq: hp-irq {
+		pins = "gpio101";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	p_sensor_int_l: p-sensor-int-l {
+		pins = "gpio141";
+		function = "gpio";
+		input-enable;
+		bias-pull-up;
+	};
+
+	pen_irq_l: pen-irq-l {
+		pins = "gpio43";
+		function = "gpio";
+		/* Has external pullup */
+		bias-disable;
+	};
+
+	pen_pdct_l: pen-pdct-l {
+		pins = "gpio39";
+		function = "gpio";
+		/* Has external pullup */
+		bias-disable;
+	};
+
+	qup_spi8_cs_gpio_init_high: qup-spi8-cs-gpio-init-high {
+		pins = "gpio35";
+		output-high;
+	};
+
+	qup_spi11_cs_gpio_init_high: qup-spi11-cs-gpio-init-high {
+		pins = "gpio47";
+		output-high;
+	};
+
+	qup_spi12_cs_gpio_init_high: qup-spi12-cs-gpio-init-high {
+		pins = "gpio51";
+		output-high;
+	};
+
+	qup_uart7_sleep_cts: qup-uart7-sleep-cts {
+		pins = "gpio28";
+		function = "gpio";
+		/*
+		 * Configure a pull-down on CTS to match the pull of
+		 * the Bluetooth module.
+		 */
+		bias-pull-down;
+	};
+
+	qup_uart7_sleep_rts: qup-uart7-sleep-rts {
+		pins = "gpio29";
+		function = "gpio";
+		/*
+		 * Configure pull-down on RTS. As RTS is active low
+		 * signal, pull it low to indicate the BT SoC that it
+		 * can wakeup the system anytime from suspend state by
+		 * pulling RX low (by sending wakeup bytes).
+		 */
+		bias-pull-down;
+	};
+
+	qup_uart7_sleep_rx: qup-uart7-sleep-rx {
+		pins = "gpio31";
+		function = "gpio";
+		/*
+		 * Configure a pull-up on RX. This is needed to avoid
+		 * garbage data when the TX pin of the Bluetooth module
+		 * is floating which may cause spurious wakeups.
+		 */
+		bias-pull-up;
+	};
+
+	qup_uart7_sleep_tx: qup-uart7-sleep-tx {
+		pins = "gpio30";
+		function = "gpio";
+		/*
+		 * Configure pull-up on TX when it isn't actively driven
+		 * to prevent BT SoC from receiving garbage during sleep.
+		 */
+		bias-pull-up;
+	};
+
+	sd_cd: sd-cd {
+		pins = "gpio91";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	tp_int_odl: tp-int-odl {
+		pins = "gpio102";
+		function = "gpio";
+		/* Has external pullup */
+		bias-disable;
+	};
+
+	ts_int_l: ts-int-l {
+		pins = "gpio81";
+		function = "gpio";
+		/* Has external pullup */
+		bias-pull-up;
+	};
+
+	ts_reset_l: ts-reset-l {
+		pins = "gpio105";
+		function = "gpio";
+		/* Has external pullup */
+		bias-disable;
+		drive-strength = <2>;
+	};
+
+	uf_cam_en: uf-cam-en {
+		pins = "gpio6";
+		function = "gpio";
+		drive-strength = <2>;
+		/* Has external pulldown */
+		bias-disable;
+	};
+
+	wf_cam_en: wf-cam-en {
+		pins = "gpio7";
+		function = "gpio";
+		drive-strength = <2>;
+		/* Has external pulldown */
+		bias-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts
new file mode 100644
index 000000000000..f95273052da0
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-herobrine-r1.dts
@@ -0,0 +1,313 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Google Herobrine board device tree source
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+/dts-v1/;
+
+#include "sc7280-herobrine.dtsi"
+
+/ {
+	model = "Google Herobrine (rev1+)";
+	compatible = "google,herobrine", "qcom,sc7280";
+};
+
+/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */
+
+&ap_spi_fp {
+	status = "okay";
+};
+
+/*
+ * Although the trackpad is really part of the herobrine baseboard, we'll
+ * put the actual definition in the board device tree since different boards
+ * might hook up different trackpads (or no i2c trackpad at all in the case
+ * of tablets / detachables).
+ */
+ap_tp_i2c: &i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	trackpad: trackpad@15 {
+		compatible = "elan,ekth3000";
+		reg = <0x15>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tp_int_odl>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+
+		vcc-supply = <&pp3300_z1>;
+
+		wakeup-source;
+	};
+};
+
+/*
+ * The touchscreen connector might come off the Qcard, at least in the case of
+ * eDP. Like the trackpad, we'll put it in the board device tree file since
+ * different boards have different touchscreens.
+ */
+ts_i2c: &i2c13 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	ap_ts: touchscreen@5c {
+		compatible = "hid-over-i2c";
+		reg = <0x5c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_conn>, <&ts_rst_conn>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <55 IRQ_TYPE_LEVEL_LOW>;
+
+		post-power-on-delay-ms = <500>;
+		hid-descr-addr = <0x0000>;
+
+		vdd-supply = <&ts_avdd>;
+	};
+};
+
+/* For nvme */
+&pcie1 {
+	status = "okay";
+};
+
+/* For nvme */
+&pcie1_phy {
+	status = "okay";
+};
+
+/* For eMMC */
+&sdhc_1 {
+	status = "okay";
+};
+
+/* For SD Card */
+&sdhc_2 {
+	status = "okay";
+};
+
+/* PINCTRL - BOARD-SPECIFIC */
+
+/*
+ * Methodology for gpio-line-names:
+ * - If a pin goes to herobrine board and is named it gets that name.
+ * - If a pin goes to herobrine board and is not named, it gets no name.
+ * - If a pin is totally internal to Qcard then it gets Qcard name.
+ * - If a pin is not hooked up on Qcard, it gets no name.
+ */
+
+&pm8350c_gpios {
+	gpio-line-names = "FLASH_STROBE_1",		/* 1 */
+			  "AP_SUSPEND",
+			  "PM8008_1_RST_N",
+			  "",
+			  "",
+			  "",
+			  "PMIC_EDP_BL_EN",
+			  "PMIC_EDP_BL_PWM",
+			  "";
+};
+
+&tlmm {
+	gpio-line-names = "AP_TP_I2C_SDA",		/* 0 */
+			  "AP_TP_I2C_SCL",
+			  "SSD_RST_L",
+			  "PE_WAKE_ODL",
+			  "AP_SAR_SDA",
+			  "AP_SAR_SCL",
+			  "PRB_SC_GPIO_6",
+			  "TP_INT_ODL",
+			  "HP_I2C_SDA",
+			  "HP_I2C_SCL",
+
+			  "GNSS_L1_EN",			/* 10 */
+			  "GNSS_L5_EN",
+			  "SPI_AP_MOSI",
+			  "SPI_AP_MISO",
+			  "SPI_AP_CLK",
+			  "SPI_AP_CS0_L",
+			  /*
+			   * AP_FLASH_WP is crossystem ABI. Schematics
+			   * call it BIOS_FLASH_WP_OD.
+			   */
+			  "AP_FLASH_WP",
+			  "",
+			  "AP_EC_INT_L",
+			  "",
+
+			  "UF_CAM_RST_L",		/* 20 */
+			  "WF_CAM_RST_L",
+			  "UART_AP_TX_DBG_RX",
+			  "UART_DBG_TX_AP_RX",
+			  "",
+			  "PM8008_IRQ_1",
+			  "HOST2WLAN_SOL",
+			  "WLAN2HOST_SOL",
+			  "MOS_BT_UART_CTS",
+			  "MOS_BT_UART_RFR",
+
+			  "MOS_BT_UART_TX",		/* 30 */
+			  "MOS_BT_UART_RX",
+			  "PRB_SC_GPIO_32",
+			  "HUB_RST_L",
+			  "",
+			  "",
+			  "AP_SPI_FP_MISO",
+			  "AP_SPI_FP_MOSI",
+			  "AP_SPI_FP_CLK",
+			  "AP_SPI_FP_CS_L",
+
+			  "AP_EC_SPI_MISO",		/* 40 */
+			  "AP_EC_SPI_MOSI",
+			  "AP_EC_SPI_CLK",
+			  "AP_EC_SPI_CS_L",
+			  "LCM_RST_L",
+			  "EARLY_EUD_N",
+			  "",
+			  "DP_HOT_PLUG_DET",
+			  "IO_BRD_MLB_ID0",
+			  "IO_BRD_MLB_ID1",
+
+			  "IO_BRD_MLB_ID2",		/* 50 */
+			  "SSD_EN",
+			  "TS_I2C_SDA_CONN",
+			  "TS_I2C_CLK_CONN",
+			  "TS_RST_CONN",
+			  "TS_INT_CONN",
+			  "AP_I2C_TPM_SDA",
+			  "AP_I2C_TPM_SCL",
+			  "PRB_SC_GPIO_58",
+			  "PRB_SC_GPIO_59",
+
+			  "EDP_HOT_PLUG_DET_N",		/* 60 */
+			  "FP_TO_AP_IRQ_L",
+			  "",
+			  "AMP_EN",
+			  "CAM0_MCLK_GPIO_64",
+			  "CAM1_MCLK_GPIO_65",
+			  "WF_CAM_MCLK",
+			  "PRB_SC_GPIO_67",
+			  "FPMCU_BOOT0",
+			  "UF_CAM_SDA",
+
+			  "UF_CAM_SCL",			/* 70 */
+			  "",
+			  "",
+			  "WF_CAM_SDA",
+			  "WF_CAM_SCL",
+			  "",
+			  "",
+			  "EN_FP_RAILS",
+			  "FP_RST_L",
+			  "PCIE1_CLKREQ_ODL",
+
+			  "EN_PP3300_DX_EDP",		/* 80 */
+			  "SC_GPIO_81",
+			  "FORCED_USB_BOOT",
+			  "WCD_RESET_N",
+			  "MOS_WLAN_EN",
+			  "MOS_BT_EN",
+			  "MOS_SW_CTRL",
+			  "MOS_PCIE0_RST",
+			  "MOS_PCIE0_CLKREQ_N",
+			  "MOS_PCIE0_WAKE_N",
+
+			  "MOS_LAA_AS_EN",		/* 90 */
+			  "SD_CD_ODL",
+			  "",
+			  "",
+			  "MOS_BT_WLAN_SLIMBUS_CLK",
+			  "MOS_BT_WLAN_SLIMBUS_DAT0",
+			  "HP_MCLK",
+			  "HP_BCLK",
+			  "HP_DOUT",
+			  "HP_DIN",
+
+			  "HP_LRCLK",			/* 100 */
+			  "HP_IRQ",
+			  "",
+			  "",
+			  "GSC_AP_INT_ODL",
+			  "EN_PP3300_CODEC",
+			  "AMP_BCLK",
+			  "AMP_DIN",
+			  "AMP_LRCLK",
+			  "UIM1_DATA_GPIO_109",
+
+			  "UIM1_CLK_GPIO_110",		/* 110 */
+			  "UIM1_RESET_GPIO_111",
+			  "PRB_SC_GPIO_112",
+			  "UIM0_DATA",
+			  "UIM0_CLK",
+			  "UIM0_RST",
+			  "UIM0_PRESENT_ODL",
+			  "SDM_RFFE0_CLK",
+			  "SDM_RFFE0_DATA",
+			  "WF_CAM_EN",
+
+			  "FASTBOOT_SEL_0",		/* 120 */
+			  "SC_GPIO_121",
+			  "FASTBOOT_SEL_1",
+			  "SC_GPIO_123",
+			  "FASTBOOT_SEL_2",
+			  "SM_RFFE4_CLK_GRFC_8",
+			  "SM_RFFE4_DATA_GRFC_9",
+			  "WLAN_COEX_UART1_RX",
+			  "WLAN_COEX_UART1_TX",
+			  "PRB_SC_GPIO_129",
+
+			  "LCM_ID0",			/* 130 */
+			  "LCM_ID1",
+			  "",
+			  "SDR_QLINK_REQ",
+			  "SDR_QLINK_EN",
+			  "QLINK0_WMSS_RESET_N",
+			  "SMR526_QLINK1_REQ",
+			  "SMR526_QLINK1_EN",
+			  "SMR526_QLINK1_WMSS_RESET_N",
+			  "PRB_SC_GPIO_139",
+
+			  "SAR1_IRQ_ODL",		/* 140 */
+			  "SAR0_IRQ_ODL",
+			  "PRB_SC_GPIO_142",
+			  "",
+			  "WCD_SWR_TX_CLK",
+			  "WCD_SWR_TX_DATA0",
+			  "WCD_SWR_TX_DATA1",
+			  "WCD_SWR_RX_CLK",
+			  "WCD_SWR_RX_DATA0",
+			  "WCD_SWR_RX_DATA1",
+
+			  "DMIC01_CLK",			/* 150 */
+			  "DMIC01_DATA",
+			  "DMIC23_CLK",
+			  "DMIC23_DATA",
+			  "",
+			  "",
+			  "EC_IN_RW_ODL",
+			  "HUB_EN",
+			  "WCD_SWR_TX_DATA2",
+			  "",
+
+			  "",				/* 160 */
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+
+			  "",				/* 170 */
+			  "MOS_BLE_UART_TX",
+			  "MOS_BLE_UART_RX",
+			  "",
+			  "",
+			  "";
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dts
deleted file mode 100644
index 7a92679a688b..000000000000
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dts
+++ /dev/null
@@ -1,14 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Google Herobrine board device tree source
- *
- * Copyright 2021 Google LLC.
- */
-
-#include "sc7280-herobrine.dtsi"
-
-/ {
-	model = "Google Herobrine";
-	compatible = "google,herobrine",
-		     "qcom,sc7280";
-};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
index 4619fa9fcacd..dc17f2079695 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
@@ -1,87 +1,37 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
- * Google Herobrine board device tree source
+ * Google Herobrine baseboard device tree source
  *
- * Copyright 2021 Google LLC.
+ * The set of things in this file is a bit loosely defined. It's roughly
+ * defined as the set of things that the child boards happen to have in
+ * common. Since all of the child boards started from the same original
+ * design this is hopefully a large set of things but as more derivatives
+ * appear things may "bubble down" out of this file. For things that are
+ * part of the reference design but might not exist on child nodes we will
+ * follow the lead of the SoC dtsi files and leave their status as "disabled".
+ *
+ * Copyright 2022 Google LLC.
  */
 
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
-#include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h>
 #include <dt-bindings/input/gpio-keys.h>
 #include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
-
-#include "sc7280.dtsi"
-
-/* PMICs depend on spmi_bus label and so must come after SoC */
-#include "pm7325.dtsi"
-#include "pm8350c.dtsi"
-#include "pmk8350.dtsi"
-
-/*
- * Reserved memory changes
- *
- * Delete all unused memory nodes and define the peripheral memory regions
- * required by the board dts.
- *
- */
-
-/delete-node/ &hyp_mem;
-/delete-node/ &xbl_mem;
-/delete-node/ &sec_apps_mem;
 
-/* Increase the size from 2MB to 8MB */
-&rmtfs_mem {
-	reg = <0x0 0x83600000 0x0 0x800000>;
-};
+#include "sc7280-qcard.dtsi"
+#include "sc7280-chrome-common.dtsi"
 
 / {
-	reserved-memory {
-		adsp_mem: memory@86700000 {
-			reg = <0x0 0x86700000 0x0 0x2800000>;
-			no-map;
-		};
-
-		camera_mem: memory@8ad00000 {
-			reg = <0x0 0x8ad00000 0x0 0x500000>;
-			no-map;
-		};
-
-		venus_mem: memory@8b200000 {
-			reg = <0x0 0x8b200000 0x0 0x500000>;
-			no-map;
-		};
-
-		mpss_mem: memory@8b800000 {
-			reg = <0x0 0x8b800000 0x0 0xf600000>;
-			no-map;
-		};
-
-		wpss_mem: memory@9ae00000 {
-			reg = <0x0 0x9ae00000 0x0 0x1900000>;
-			no-map;
-		};
-
-		mba_mem: memory@9c700000 {
-			reg = <0x0 0x9c700000 0x0 0x200000>;
-			no-map;
-		};
-	};
-
-	aliases {
-		serial0 = &uart5;
-		serial1 = &uart7;
-	};
-
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
-	/* FIXED REGULATORS - parents above children */
+	/*
+	 * FIXED REGULATORS
+	 *
+	 * Sort order:
+	 * 1. parents above children.
+	 * 2. higher voltage above lower voltage.
+	 * 3. alphabetically by node name.
+	 */
 
 	/* This is the top level supply and variable voltage */
 	ppvar_sys: ppvar-sys-regulator {
@@ -103,11 +53,11 @@
 		vin-supply = <&ppvar_sys>;
 	};
 
-	pp5000_s3: pp5000-s3-regulator {
+	pp5000_s5: pp5000-s5-regulator {
 		compatible = "regulator-fixed";
-		regulator-name = "pp5000_s3";
+		regulator-name = "pp5000_s5";
 
-		/* EC turns on with en_pp5000_s3; always on for AP */
+		/* EC turns on with en_pp5000_s5; always on for AP */
 		regulator-always-on;
 		regulator-boot-on;
 		regulator-min-microvolt = <5000000>;
@@ -129,7 +79,6 @@
 		vin-supply = <&ppvar_sys>;
 	};
 
-	pp3300_audio:
 	pp3300_codec: pp3300-codec-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "pp3300_codec";
@@ -137,7 +86,7 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 
-		gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>;
+		gpio = <&tlmm 105 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 		pinctrl-names = "default";
 		pinctrl-0 = <&en_pp3300_codec>;
@@ -145,11 +94,9 @@
 		vin-supply = <&pp3300_z1>;
 	};
 
-	pp3300_cam:
-	pp3300_edp:
-	pp3300_ts: pp3300-edp-regulator {
+	pp3300_left_in_mlb: pp3300-left-in-mlb-regulator {
 		compatible = "regulator-fixed";
-		regulator-name = "pp3300_edp";
+		regulator-name = "pp3300_left_in_mlb";
 
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
@@ -162,9 +109,9 @@
 		vin-supply = <&pp3300_z1>;
 	};
 
-	pp3300_fp:
+	pp3300_mcu_fp:
 	pp3300_fp_ls:
-	pp3300_mcu: pp3300-fp-regulator {
+	pp3300_fp_mcu: pp3300-fp-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "pp3300_fp";
 
@@ -175,7 +122,7 @@
 		regulator-always-on;
 
 		/*
-		 * WARNING: it is intentional that GPIO 42 isn't listed here.
+		 * WARNING: it is intentional that GPIO 77 isn't listed here.
 		 * The userspace script for updating the fingerprint firmware
 		 * needs to control the FP regulators during a FW update,
 		 * hence the signal can't be owned by the kernel regulator.
@@ -197,10 +144,10 @@
 		regulator-boot-on;
 		regulator-always-on;
 
-		gpio = <&tlmm 24 GPIO_ACTIVE_HIGH>;
+		gpio = <&tlmm 157 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 		pinctrl-names = "default";
-		pinctrl-0 = <&en_pp3300_hub>;
+		pinctrl-0 = <&hub_en>;
 
 		vin-supply = <&pp3300_z1>;
 	};
@@ -219,44 +166,44 @@
 		vin-supply = <&pp3300_z1>;
 	};
 
-	pp2850_uf_cam: pp2850-uf-cam {
+	pp3300_ssd: pp3300-ssd-regulator {
 		compatible = "regulator-fixed";
-		regulator-name = "pp2850_uf_cam";
+		regulator-name = "pp3300_ssd";
 
-		regulator-min-microvolt = <2850000>;
-		regulator-max-microvolt = <2850000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
 
-		gpio = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+		gpio = <&tlmm 51 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 		pinctrl-names = "default";
-		pinctrl-0 = <&uf_cam_en>;
+		pinctrl-0 = <&ssd_en>;
 
-		vin-supply = <&pp3300_cam>;
+		vin-supply = <&pp3300_z1>;
 	};
 
-	pp2850_vcm_wf_cam: pp2850-vcm-wf-cam {
+	pp2850_vcm_wf_cam: pp2850-vcm-wf-cam-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "pp2850_vcm_wf_cam";
 
 		regulator-min-microvolt = <2850000>;
 		regulator-max-microvolt = <2850000>;
 
-		gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+		gpio = <&tlmm 119 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 		pinctrl-names = "default";
 		pinctrl-0 = <&wf_cam_en>;
 
-		vin-supply = <&pp3300_cam>;
+		vin-supply = <&pp3300_z1>;
 	};
 
-	pp2850_wf_cam: pp2850-wf-cam {
+	pp2850_wf_cam: pp2850-wf-cam-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "pp2850_wf_cam";
 
 		regulator-min-microvolt = <2850000>;
 		regulator-max-microvolt = <2850000>;
 
-		gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+		gpio = <&tlmm 119 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 		/*
 		 * The pinconf can only be referenced once so we put it on the
@@ -266,7 +213,7 @@
 		 * pinctrl-0 = <&wf_cam_en>;
 		 */
 
-		vin-supply = <&pp3300_cam>;
+		vin-supply = <&pp3300_z1>;
 	};
 
 	pp1800_fp: pp1800-fp-regulator {
@@ -280,7 +227,7 @@
 		regulator-always-on;
 
 		/*
-		 * WARNING: it is intentional that GPIO 42 isn't listed here.
+		 * WARNING: it is intentional that GPIO 77 isn't listed here.
 		 * The userspace script for updating the fingerprint firmware
 		 * needs to control the FP regulators during a FW update,
 		 * hence the signal can't be owned by the kernel regulator.
@@ -293,34 +240,14 @@
 		status = "disabled";
 	};
 
-	pp1800_uf_cam: pp1800-uf-cam {
-		compatible = "regulator-fixed";
-		regulator-name = "pp1800_uf_cam";
-
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-
-		gpio = <&tlmm 6 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		/*
-		 * The pinconf can only be referenced once so we put it on the
-		 * first regulator and comment it out here.
-		 *
-		 * pinctrl-names = "default";
-		 * pinctrl-0 = <&uf_cam_en>;
-		 */
-
-		vin-supply = <&pp1800_l19b>;
-	};
-
-	pp1800_wf_cam: pp1800-wf-cam {
+	pp1800_wf_cam: pp1800-wf-cam-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "pp1800_wf_cam";
 
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 
-		gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+		gpio = <&tlmm 119 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 		/*
 		 * The pinconf can only be referenced once so we put it on the
@@ -330,17 +257,17 @@
 		 * pinctrl-0 = <&wf_cam_en>;
 		 */
 
-		vin-supply = <&pp1800_l19b>;
+		vin-supply = <&vreg_l19b_s0>;
 	};
 
-	pp1200_wf_cam: pp1200-wf-cam {
+	pp1200_wf_cam: pp1200-wf-cam-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "pp1200_wf_cam";
 
 		regulator-min-microvolt = <1200000>;
 		regulator-max-microvolt = <1200000>;
 
-		gpio = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+		gpio = <&tlmm 119 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 		/*
 		 * The pinconf can only be referenced once so we put it on the
@@ -350,29 +277,11 @@
 		 * pinctrl-0 = <&wf_cam_en>;
 		 */
 
-		vin-supply = <&pp1200_l6b>;
+		vin-supply = <&pp3300_z1>;
 	};
 
 	/* BOARD-SPECIFIC TOP LEVEL NODES */
 
-	gpio_keys: gpio-keys {
-		compatible = "gpio-keys";
-		status = "disabled";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pen_pdct_l>;
-
-		pen_insert: pen-insert {
-			label = "Pen Insert";
-
-			/* Insert = low, eject = high */
-			gpios = <&tlmm 39 GPIO_ACTIVE_LOW>;
-			linux,code = <SW_PEN_INSERTED>;
-			linux,input-type = <EV_SW>;
-			wakeup-event-action = <EV_ACT_DEASSERTED>;
-			wakeup-source;
-		};
-	};
-
 	pwmleds {
 		compatible = "pwm-leds";
 		status = "disabled";
@@ -385,263 +294,54 @@
 	};
 };
 
-&apps_rsc {
-	pm7325-regulators {
-		compatible = "qcom,pm7325-rpmh-regulators";
-		qcom,pmic-id = "b";
-
-		vdd19_pmu_pcie_i:
-		vdd19_pmu_rfa_i:
-		vreg_s1b_wlan:
-		vreg_s1b: smps1 {
-			regulator-min-microvolt = <1856000>;
-			regulator-max-microvolt = <2040000>;
-		};
-
-		vdd_pmu_aon_i:
-		vreg_s7b_wlan:
-		vreg_s7b: smps7 {
-			regulator-min-microvolt = <535000>;
-			regulator-max-microvolt = <1120000>;
-		};
-
-		vdd13_pmu_pcie_i:
-		vdd13_pmu_rfa_i:
-		vreg_s8b_wlan:
-		vreg_s8b: smps8 {
-			regulator-min-microvolt = <1256000>;
-			regulator-max-microvolt = <1500000>;
-		};
-
-		vdda_usb_ss_dp_core:
-		vreg_l1b: ldo1 {
-			regulator-min-microvolt = <825000>;
-			regulator-max-microvolt = <925000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vdda_usb_hs0_3p1:
-		vreg_l2b: ldo2 {
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <3544000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pp1200_l6b:
-		vdd_ufs_1p2:
-		vdd_vref:
-		vdda_csi01_1p2:
-		vdda_csi23_1p2:
-		vdda_csi4_1p2:
-		vdda_dsi0_1p2:
-		vdda_pcie0_1p2:
-		vdda_pcie1_1p2:
-		vdda_usb_ss_dp_1p2:
-		vdda_qlink0_1p2_ck:
-		vdda_qlink1_1p2_ck:
-		vreg_l6b_1p2:
-		vreg_l6b: ldo6 {
-			regulator-min-microvolt = <1120000>;
-			regulator-max-microvolt = <1408000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pp2950_l7b:
-		vreg_l7b: ldo7 {
-			regulator-min-microvolt = <2960000>;
-			regulator-max-microvolt = <2960000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		codec_vcc:
-		pp1800_l18b_s0:
-		pp1800_ts:
-		vdd1:
-		vddpx_0:
-		vddpx_3:
-		vddpx_7:
-		vreg_l18b: ldo18 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2000000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pp1800_l19b:
-		vddpx_ts:
-		vddpx_wl4otp:
-		vreg_l19b: ldo19 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-
-	pm8350c-regulators {
-		compatible = "qcom,pm8350c-rpmh-regulators";
-		qcom,pmic-id = "c";
-
-		vreg_s1c: smps1 {
-			regulator-min-microvolt = <2190000>;
-			regulator-max-microvolt = <2210000>;
-		};
+/*
+ * BOARD-LOCAL NAMES FOR REGULATORS THAT CONNECT TO QCARD
+ *
+ * Names are only listed here if regulators go somewhere other than a
+ * testpoint.
+ */
 
-		vddpx_1:
-		vreg_s9c: smps9 {
-			regulator-min-microvolt = <1010000>;
-			regulator-max-microvolt = <1170000>;
-		};
+/* From Qcard to our board; ordered by PMIC-ID / rail number */
 
-		pp1800_l1c:
-		pp1800_pen:
-		vdd_a_gfx_cs_1p1:
-		vdd_a_cxo_1p8:
-		vdd_qfprom:
-		vdda_apc_cs_1p8:
-		vdda_qrefs_1p8:
-		vdda_turing_q6_cs_1p8:
-		vdda_usb_hs0_1p8:
-		vreg_l1c: ldo1 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1980000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
+pp1256_s8b: &vreg_s8b_1p256 {};
 
-		dmic_vdd:
-		pp1800_alc5682:
-		pp1800_l2c:
-		pp1800_vreg_alc5682:
-		vreg_l2c: ldo2 {
-			regulator-min-microvolt = <1620000>;
-			regulator-max-microvolt = <1980000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
+pp1800_l18b_s0: &vreg_l18b_1p8 {};
+pp1800_l18b:    &vreg_l18b_1p8 {};
 
-		pp3300_sar:
-		pp3300_sensor:
-		vreg_l3c: ldo3 {
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <3540000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
+vreg_l19b_s0: &vreg_l19b_1p8 {};
 
-		ppvar_uim1:
-		vddpx_5:
-		vreg_l4c: ldo4 {
-			regulator-min-microvolt = <1620000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
+pp1800_alc5682: &vreg_l2c_1p8 {};
+pp1800_l2c:     &vreg_l2c_1p8 {};
 
-		pp2950_l5c:
-		uim_vcc:
-		vddpx_6:
-		vreg_l5c: ldo5 {
-			regulator-min-microvolt = <1620000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
+vreg_l4c: &vreg_l4c_1p8_3p0 {};
 
-		ppvar_l6c:
-		vddpx_2:
-		vreg_l6c: ldo6 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2950000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
+ppvar_l6c: &vreg_l6c_2p96 {};
 
-		vreg_l7c: ldo7 {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3544000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
+pp3000_l7c: &vreg_l7c_3p0 {};
 
-		pp1800_prox:
-		pp1800_sar:
-		vreg_l8c: ldo8 {
-			regulator-min-microvolt = <1620000>;
-			regulator-max-microvolt = <2000000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
+pp1800_prox: &vreg_l8c_1p8 {};
+pp1800_l8c:  &vreg_l8c_1p8 {};
 
-		pp2950_l9c:
-		vreg_l9c: ldo9 {
-			regulator-min-microvolt = <2960000>;
-			regulator-max-microvolt = <2960000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
+pp2950_l9c: &vreg_l9c_2p96 {};
 
-		vdd_a_gnss_0p9:
-		vdd_ufs_core:
-		vdd_usb_hs0_core:
-		vdd_vref_0p9:
-		vdda_csi01_0p9:
-		vdda_csi23_0p9:
-		vdda_csi4_0p9:
-		vdda_dsi0_pll_0p9:
-		vdda_dsi0_0p9:
-		vdda_pcie0_core:
-		vdda_pcie1_core:
-		vdda_qlink0_0p9:
-		vdda_qlink1_0p9:
-		vdda_qlink0_0p9_ck:
-		vdda_qlink1_0p9_ck:
-		vdda_qrefs_0p875:
-		vreg_l10c_0p8:
-		vreg_l10c: ldo10 {
-			regulator-min-microvolt = <720000>;
-			regulator-max-microvolt = <1050000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
+pp1800_lcm:  &vreg_l12c_1p8 {};
+pp1800_mipi: &vreg_l12c_1p8 {};
+pp1800_l12c: &vreg_l12c_1p8 {};
 
-		pp2800_l11c:
-		vreg_l11c: ldo11 {
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <3544000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
+pp3300_lcm:  &vreg_l13c_3p0 {};
+pp3300_mipi: &vreg_l13c_3p0 {};
+pp3300_l13c: &vreg_l13c_3p0 {};
 
-		pp1800_l12c:
-		vreg_l12c: ldo12 {
-			regulator-min-microvolt = <1650000>;
-			regulator-max-microvolt = <2000000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
+/* From our board to Qcard; ordered same as node definition above */
 
-		pp3300_l13c:
-		vreg_l13c: ldo13 {
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <3544000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
+vreg_edp_bl: &ppvar_sys {};
 
-		vreg_bob: bob {
-			regulator-min-microvolt = <3008000>;
-			regulator-max-microvolt = <3960000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
-		};
-	};
-};
-
-ap_tp_i2c: &i2c1 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	trackpad: trackpad@15 {
-		compatible = "elan,ekth3000";
-		reg = <0x15>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&tp_int_odl>;
-
-		interrupt-parent = <&tlmm>;
-		interrupts = <102 IRQ_TYPE_EDGE_FALLING>;
+ts_avdd:      &pp3300_left_in_mlb {};
+vreg_edp_3p3: &pp3300_left_in_mlb {};
 
-		vcc-supply = <&pp3300_z1>;
+/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */
 
-		wakeup-source;
-	};
-};
-
-ap_h1_i2c: &i2c12 {
+ap_i2c_tpm: &i2c14 {
 	status = "okay";
 	clock-frequency = <400000>;
 
@@ -650,82 +350,26 @@ ap_h1_i2c: &i2c12 {
 		reg = <0x50>;
 
 		pinctrl-names = "default";
-		pinctrl-0 = <&h1_ap_int_odl>;
-
-		interrupt-parent = <&tlmm>;
-		interrupts = <54 IRQ_TYPE_EDGE_RISING>;
-	};
-};
-
-ap_ts_pen: &i2c13 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	ap_ts: touchscreen@10 {
-		compatible = "hid-over-i2c";
-		reg = <0x10>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
+		pinctrl-0 = <&gsc_ap_int_odl>;
 
 		interrupt-parent = <&tlmm>;
-		interrupts = <81 IRQ_TYPE_LEVEL_LOW>;
-
-		post-power-on-delay-ms = <20>;
-		hid-descr-addr = <0x0001>;
-
-		vdd-supply = <&pp3300_ts>;
+		interrupts = <104 IRQ_TYPE_EDGE_RISING>;
 	};
 };
 
-&pm7325_gpios {
-	status = "disabled"; /* No GPIOs are connected */
-};
-
-&pmk8350_gpios {
-	status = "disabled"; /* No GPIOs are connected */
-};
+/* NVMe drive, enabled on a per-board basis */
+&pcie1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie1_clkreq_n>, <&ssd_rst_l>, <&pe_wake_odl>;
 
-&pmk8350_pon {
-	status = "disabled";
+	perst-gpio = <&tlmm 2 GPIO_ACTIVE_LOW>;
+	vddpe-3v3-supply = <&pp3300_ssd>;
 };
 
 &pmk8350_rtc {
 	status = "disabled";
 };
 
-&pmk8350_vadc {
-	pmk8350_die_temp {
-		reg = <PMK8350_ADC7_DIE_TEMP>;
-		label = "pmk8350_die_temp";
-		qcom,pre-scaling = <1 1>;
-	};
-
-	pmr735a_die_temp {
-		reg = <PMR735A_ADC7_DIE_TEMP>;
-		label = "pmr735a_die_temp";
-		qcom,pre-scaling = <1 1>;
-	};
-};
-
-&qfprom {
-	vcc-supply = <&vdd_qfprom>;
-};
-
-&qspi {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data01>;
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-
-		spi-max-frequency = <37500000>;
-		spi-tx-bus-width = <2>;
-		spi-rx-bus-width = <2>;
-	};
-};
-
 &qupv3_id_0 {
 	status = "okay";
 };
@@ -734,44 +378,50 @@ ap_ts_pen: &i2c13 {
 	status = "okay";
 };
 
-&sdhc_1 {
-	status = "okay";
-
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdc1_on>;
-	pinctrl-1 = <&sdc1_off>;
-	vmmc-supply = <&pp2950_l7b>;
-	vqmmc-supply = <&pp1800_l19b>;
-};
-
+/* SD Card, enabled on a per-board basis */
 &sdhc_2 {
-	status = "okay";
+	pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>, <&sd_cd_odl>;
+	pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>, <&sd_cd_odl>;
 
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdc2_on>;
-	pinctrl-1 = <&sdc2_off>;
 	vmmc-supply = <&pp2950_l9c>;
 	vqmmc-supply = <&ppvar_l6c>;
 
 	cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>;
 };
 
-ap_ec_spi: &spi8 {
+/* Fingerprint, enabled on a per-board basis */
+ap_spi_fp: &spi9 {
+	pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs_gpio_init_high>, <&qup_spi9_cs_gpio>;
+
+	cs-gpios = <&tlmm 39 GPIO_ACTIVE_LOW>;
+
+	cros_ec_fp: ec@0 {
+		compatible = "google,cros-ec-spi";
+		reg = <0>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <61 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&fp_to_ap_irq_l>, <&fp_rst_l>, <&fpmcu_boot0>;
+		spi-max-frequency = <3000000>;
+	};
+};
+
+ap_ec_spi: &spi10 {
 	status = "okay";
+	pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs_gpio_init_high>, <&qup_spi10_cs_gpio>;
 
-	pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs_gpio_init_high>, <&qup_spi8_cs_gpio>;
-	cs-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
+	cs-gpios = <&tlmm 43 GPIO_ACTIVE_LOW>;
 
 	cros_ec: ec@0 {
 		compatible = "google,cros-ec-spi";
 		reg = <0>;
 		interrupt-parent = <&tlmm>;
-		interrupts = <142 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&ap_ec_int_l>;
 		spi-max-frequency = <3000000>;
 
-		cros_ec_pwm: ec-pwm {
+		cros_ec_pwm: pwm {
 			compatible = "google,cros-ec-pwm";
 			#pwm-cells = <1>;
 		};
@@ -841,15 +491,6 @@ ap_ec_spi: &spi8 {
 	>;
 };
 
-&uart5 {
-	compatible = "qcom,geni-debug-uart";
-	status = "okay";
-};
-
-&uart7 {
-	status = "okay";
-};
-
 &usb_1 {
 	status = "okay";
 };
@@ -860,17 +501,10 @@ ap_ec_spi: &spi8 {
 
 &usb_1_hsphy {
 	status = "okay";
-
-	vdda-pll-supply = <&vdd_usb_hs0_core>;
-	vdda33-supply = <&vdda_usb_hs0_3p1>;
-	vdda18-supply = <&vdda_usb_hs0_1p8>;
 };
 
 &usb_1_qmpphy {
 	status = "okay";
-
-	vdda-phy-supply = <&vdda_usb_ss_dp_1p2>;
-	vdda-pll-supply = <&vdda_usb_ss_dp_core>;
 };
 
 &usb_2 {
@@ -883,530 +517,269 @@ ap_ec_spi: &spi8 {
 
 &usb_2_hsphy {
 	status = "okay";
+};
+
+/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */
 
-	vdda-pll-supply = <&vdd_usb_hs0_core>;
-	vdda33-supply = <&vdda_usb_hs0_3p1>;
-	vdda18-supply = <&vdda_usb_hs0_1p8>;
+&dp_hot_plug_det {
+	bias-disable;
 };
 
-/* PINCTRL - additions to nodes defined in sc7280.dtsi */
+&pcie1_clkreq_n {
+	bias-pull-up;
+	drive-strength = <2>;
+};
 
 &qspi_cs0 {
 	bias-disable;
+	drive-strength = <8>;
 };
 
 &qspi_clk {
 	bias-disable;
+	drive-strength = <8>;
 };
 
 &qspi_data01 {
 	/* High-Z when no transfers; nice to park the lines */
 	bias-pull-up;
+	drive-strength = <8>;
 };
 
-&qup_uart5_rx {
+/* For ap_tp_i2c */
+&qup_i2c0_data_clk {
+	/* Has external pull */
+	bias-disable;
 	drive-strength = <2>;
-	bias-pull-up;
 };
 
-&qup_uart5_tx {
-	drive-strength = <2>;
+/* For ap_i2c_tpm */
+&qup_i2c14_data_clk {
+	/* Has external pull */
 	bias-disable;
+	drive-strength = <2>;
 };
 
-&qup_uart7_cts {
-	/*
-	 * Configure a pull-down on CTS to match the pull of
-	 * the Bluetooth module.
-	 */
-	bias-pull-down;
+/* For ap_spi_fp */
+&qup_spi9_data_clk {
+	bias-disable;
+	drive-strength = <2>;
 };
 
-&qup_uart7_rts {
-	/* We'll drive RTS, so no pull */
-	drive-strength = <2>;
+/* For ap_spi_fp */
+&qup_spi9_cs_gpio {
 	bias-disable;
+	drive-strength = <2>;
 };
 
-&qup_uart7_tx {
-	/* We'll drive TX, so no pull */
+/* For ap_ec_spi */
+&qup_spi10_data_clk {
+	bias-disable;
 	drive-strength = <2>;
+};
+
+/* For ap_ec_spi */
+&qup_spi10_cs_gpio {
 	bias-disable;
+	drive-strength = <2>;
 };
 
-&qup_uart7_rx {
-	/*
-	 * Configure a pull-up on RX. This is needed to avoid
-	 * garbage data when the TX pin of the Bluetooth module is
-	 * in tri-state (module powered off or not driving the
-	 * signal yet).
-	 */
+/* For uart_dbg */
+&qup_uart5_rx {
 	bias-pull-up;
 };
 
-&sdc1_on {
-	clk {
-		bias-disable;
-		drive-strength = <16>;
-	};
-
-	cmd {
-		bias-pull-up;
-		drive-strength = <10>;
-	};
-
-	data {
-		bias-pull-up;
-		drive-strength = <10>;
-	};
-
-	rclk {
-		bias-pull-down;
-	};
+/* For uart_dbg */
+&qup_uart5_tx {
+	bias-disable;
+	drive-strength = <2>;
 };
 
-&sdc2_on {
-	clk {
-		bias-disable;
-		drive-strength = <16>;
-	};
-
-	cmd {
-		bias-pull-up;
-		drive-strength = <10>;
-	};
+&sdc2_clk {
+	bias-disable;
+	drive-strength = <16>;
+};
 
-	data {
-		bias-pull-up;
-		drive-strength = <10>;
-	};
+&sdc2_cmd {
+	bias-pull-up;
+	drive-strength = <10>;
+};
 
-	sd-cd {
-		pins = "gpio91";
-		bias-pull-up;
-	};
+&sdc2_data {
+	bias-pull-up;
+	drive-strength = <10>;
 };
 
 /* PINCTRL - board-specific pinctrl */
 
-&pm8350c_gpios {
-	gpio-line-names = "AP_SUSPEND",
-			  "",
-			  "",
-			  "AP_BL_EN",
-			  "",
-			  "SD_CD_ODL",
-			  "",
-			  "",
-			  "AP_BL_PWM";
-
-	ap_bl_en: ap-bl-en {
-		pins = "gpio4";
-		function = "normal";
-		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
-		bias-disable;
+&pm7325_gpios {
+	/*
+	 * On a quick glance it might look like KYPD_VOL_UP_N is used, but
+	 * that only passes through to a debug connector and not to the actual
+	 * volume up key.
+	 */
+	status = "disabled"; /* No GPIOs are connected */
+};
 
-		/* Force backlight to be disabled to match state at boot. */
-		output-low;
-	};
+&pmk8350_gpios {
+	status = "disabled"; /* No GPIOs are connected */
 };
 
 &tlmm {
-	gpio-line-names = "HP_I2C_SDA",			/* 0 */
-			  "HP_I2C_SCL",
-			  "SSD_RST_L",
-			  "PE_WAKE_ODL",
-			  "AP_TP_I2C_SDA",
-			  "AP_TP_I2C_SCL",
-			  "UF_CAM_EN",
-			  "WF_CAM_EN",
-			  "AP_SAR_SENSOR_SDA",
-			  "AP_SAR_SENSOR_SCL",
-
-			  "",				/* 10 */
-			  "",
-			  "AP_SPI_MOSI",
-			  "AP_SPI_MISO",
-			  "AP_SPI_CLK",
-			  "AP_SPI_CS0_L",
-			  "",
-			  "",
-			  "EDP_HPD",
-			  "",
-
-			  "UF_CAM_RST_L",		/* 20 */
-			  "WF_CAM_RST_L",
-			  "UART_AP_TX_DBG_RX",
-			  "UART_DBG_TX_AP_RX",
-			  "EN_PP3300_HUB",
-			  "",
-			  "HOST2WLAN_SOL",
-			  "WLAN2HOST_SOL",
-			  "BT_UART_CTS",
-			  "BT_UART_RTS",
-
-			  "BT_UART_TXD",		/* 30 */
-			  "BT_UART_RXD",
-			  "AP_EC_SPI_MISO",
-			  "AP_EC_SPI_MOSI",
-			  "AP_EC_SPI_CLK",
-			  "AP_EC_SPI_CS_L",
-			  "",
-			  "",
-			  "",
-			  "PEN_PDCT_L",
-
-			  "IO_BRD_ID0",			/* 40 */
-			  "IO_BRD_ID1",
-			  "EN_FP_RAILS",
-			  "PEN_IRQ_L",
-			  "AP_SPI_FP_MISO",
-			  "AP_SPI_FP_MOSI",
-			  "AP_SPI_FP_CLK",
-			  "AP_SPI_FP_CS_L",
-			  "AP_H1_SPI_MISO",
-			  "AP_H1_SPI_MOSI",
-
-			  "AP_H1_SPI_CLK",		/* 50 */
-			  "AP_H1_SPI_CS_L",
-			  "AP_TS_PEN_I2C_SDA",
-			  "AP_TS_PEN_I2C_SCL",
-			  "H1_AP_INT_ODL",
-			  "",
-			  "LCM_RST_1V8_L",
-			  "AMP_EN",
-			  "",
-			  "DP_HOT_PLUG_DET",
-
-			  "HUB_RST_L",			/* 60 */
-			  "FP_TO_AP_IRQ_L",
-			  "",
-			  "",
-			  "UF_CAM_MCLK",
-			  "WF_CAM_MCLK",
-			  "IO_BRD_ID2",
-			  "EN_PP3300_CODEC",
-			  "EC_IN_RW_ODL",
-			  "UF_CAM_SDA",
-
-			  "UF_CAM_SCL",			/* 70 */
-			  "WF_CAM_SDA",
-			  "WF_CAM_SCL",
-			  "AP_BRD_ID0",
-			  "AP_BRD_ID1",
-			  "AP_BRD_ID2",
-			  "",
-			  "FPMCU_BOOT0",
-			  "FP_RST_L",
-			  "PE_CLKREQ_ODL",
-
-			  "EN_EDP_PP3300",		/* 80 */
-			  "TS_INT_L",
-			  "FORCE_USB_BOOT",
-			  "WCD_RST_L",
-			  "WLAN_EN",
-			  "BT_EN",
-			  "WLAN_SW_CTRL",
-			  "PCIE0_RESET_L",
-			  "PCIE0_CLK_REQ_L",
-			  "PCIE0_WAKE_L",
-
-			  "AS_EN",			/* 90 */
-			  "SD_CD_ODL",
-			  "",
-			  /*
-			   * AP_FLASH_WP_L is crossystem ABI. Schematics
-			   * call it BIOS_FLASH_WP_L.
-			   */
-			  "AP_FLASH_WP_L",
-			  "BT_WLAN_SB_CLK",
-			  "BT_WLAN_SB_DATA",
-			  "HP_MCLK",
-			  "HP_BCLK",
-			  "HP_DOUT",
-			  "HP_DIN",
-
-			  "HP_LRCLK",			/* 100 */
-			  "HP_IRQ",
-			  "TP_INT_ODL",
-			  "",
-			  "IO_SKU_ID2",
-			  "TS_RESET_L",
-			  "AMP_BCLK",
-			  "AMP_DIN",
-			  "AMP_LRCLK",
-			  "UIM2_DATA",
-
-			  "UIM2_CLK",			/* 110 */
-			  "UIM2_RST",
-			  "UIM2_PRESENT",
-			  "UIM1_DATA",
-			  "UIM1_CLK",
-			  "UIM1_RST",
-			  "",
-			  "RFFE0_CLK",
-			  "RFFE0_DATA/BOOT_CONFIG_0",
-			  "RFFE1_CLK",
-
-			  "RFFE1_DATA/BOOT_CONFIG_1",	/* 120 */
-			  "RFFE2_CLK",
-			  "RFFE2_DATA/BOOT_CONFIG_2",
-			  "RFFE3_CLK",
-			  "RFFE3_DATA/BOOT_CONFIG_3",
-			  "RFFE4_CLK",
-			  "RFFE4_DATA",
-			  "WCI2_LTE_COEX_RXD",
-			  "WCI2_LTE_COEX_TXD",
-			  "IO_SKU_ID0",
-
-			  "IO_SKU_ID1",			/* 130 */
-			  "",
-			  "",
-			  "QLINK0_REQ",
-			  "QLINK0_EN",
-			  "QLINK0_WMSS_RESET_L",
-			  "QLINK1_REQ",
-			  "QLINK1_EN",
-			  "QLINK1_WMSS_RESET_L",
-			  "FORCED_USB_BOOT_POL",
-
-			  "",				/* 140 */
-			  "P_SENSOR_INT_L",
-			  "AP_EC_INT_L",
-			  "",
-			  "WCD_SWR_TX_CLK",
-			  "WCD_SWR_TX_DATA_0",
-			  "WCD_SWR_TX_DATA_1",
-			  "WCD_SWR_RX_CLK",
-			  "WCD_SWR_RX_DATA_0",
-			  "WCD_SWR_RX_DATA_1",
-
-			  "",				/* 150 */
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "WCD_SWR_TX_DATA_2",
-			  "",
-
-			  "",				/* 160 */
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-
-			  "",				/* 170 */
-			  "SENS_UART_TXD",
-			  "SENS_UART_RXD",
-			  "",
-			  "",
-			  "";
-
-	/*
-	 * pinctrl settings for pins that have no real owners.
-	 */
+	/* pinctrl settings for pins that have no real owners. */
 	pinctrl-names = "default";
-	pinctrl-0 = <&bios_flash_wp_l>;
+	pinctrl-0 = <&bios_flash_wp_od>;
 
 	amp_en: amp-en {
-		pins = "gpio57";
+		pins = "gpio63";
 		function = "gpio";
-		bias-pull-down;
+		bias-disable;
+		drive-strength = <2>;
 	};
 
 	ap_ec_int_l: ap-ec-int-l {
-		pins = "gpio142";
-		input-enable;
+		pins = "gpio18";
+		function = "gpio";
 		bias-pull-up;
 	};
 
-	bios_flash_wp_l: bios-flash-wp-l {
-		pins = "gpio93";
+	bios_flash_wp_od: bios-flash-wp-od {
+		pins = "gpio16";
 		function = "gpio";
-		input-enable;
+		/* Has external pull */
 		bias-disable;
 	};
 
-	bt_en: bt-en {
-		pins = "gpio85";
-		function = "gpio";
-		drive-strength = <2>;
-		output-low;
-		bias-pull-down;
-	};
-
 	en_fp_rails: en-fp-rails {
-		pins = "gpio42";
+		pins = "gpio77";
+		function = "gpio";
+		bias-disable;
 		drive-strength = <2>;
 		output-high;
-		bias-disable;
 	};
 
 	en_pp3300_codec: en-pp3300-codec {
-		pins = "gpio67";
-		drive-strength = <2>;
+		pins = "gpio105";
+		function = "gpio";
 		bias-disable;
+		drive-strength = <2>;
 	};
 
 	en_pp3300_dx_edp: en-pp3300-dx-edp {
 		pins = "gpio80";
 		function = "gpio";
-		drive-strength = <2>;
-		/* Has external pulldown */
 		bias-disable;
+		drive-strength = <2>;
 	};
 
-	en_pp3300_hub: en-pp3300-hub {
-		pins = "gpio24";
+	fp_rst_l: fp-rst-l {
+		pins = "gpio78";
 		function = "gpio";
-		drive-strength = <2>;
-		/* Has external pulldown */
 		bias-disable;
+		drive-strength = <2>;
+		output-high;
 	};
 
 	fp_to_ap_irq_l: fp-to-ap-irq-l {
 		pins = "gpio61";
 		function = "gpio";
-		input-enable;
 		/* Has external pullup */
 		bias-disable;
 	};
 
-	h1_ap_int_odl: h1-ap-int-odl {
-		pins = "gpio54";
+	fpmcu_boot0: fpmcu-boot0 {
+		pins = "gpio68";
 		function = "gpio";
-		input-enable;
-		bias-pull-up;
+		bias-disable;
+		output-low;
 	};
 
-	hp_irq: hp-irq {
-		pins = "gpio101";
+	gsc_ap_int_odl: gsc-ap-int-odl {
+		pins = "gpio104";
 		function = "gpio";
 		bias-pull-up;
 	};
 
-	p_sensor_int_l: p-sensor-int-l {
-		pins = "gpio141";
+	hp_irq: hp-irq {
+		pins = "gpio101";
 		function = "gpio";
-		input-enable;
 		bias-pull-up;
 	};
 
-	pen_irq_l: pen-irq-l {
-		pins = "gpio43";
+	hub_en: hub-en {
+		pins = "gpio157";
 		function = "gpio";
-		/* Has external pullup */
 		bias-disable;
+		drive-strength = <2>;
 	};
 
-	pen_pdct_l: pen-pdct-l {
-		pins = "gpio39";
+	pe_wake_odl: pe-wake-odl {
+		pins = "gpio3";
 		function = "gpio";
-		/* Has external pullup */
+		/* Has external pull */
 		bias-disable;
+		drive-strength = <2>;
 	};
 
-	qup_spi8_cs_gpio_init_high: qup-spi8-cs-gpio-init-high {
-		pins = "gpio35";
-		output-high;
-	};
-
-	qup_spi11_cs_gpio_init_high: qup-spi11-cs-gpio-init-high {
-		pins = "gpio47";
-		output-high;
-	};
-
-	qup_spi12_cs_gpio_init_high: qup-spi12-cs-gpio-init-high {
-		pins = "gpio51";
+	/* For ap_spi_fp */
+	qup_spi9_cs_gpio_init_high: qup-spi9-cs-gpio-init-high {
+		pins = "gpio39";
+		function = "gpio";
 		output-high;
 	};
 
-	qup_uart7_sleep_cts: qup-uart7-sleep-cts {
-		pins = "gpio28";
+	/* For ap_ec_spi */
+	qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high {
+		pins = "gpio43";
 		function = "gpio";
-		/*
-		 * Configure a pull-down on CTS to match the pull of
-		 * the Bluetooth module.
-		 */
-		bias-pull-down;
+		output-high;
 	};
 
-	qup_uart7_sleep_rts: qup-uart7-sleep-rts {
-		pins = "gpio29";
+	sar0_irq_odl: sar0-irq-odl {
+		pins = "gpio141";
 		function = "gpio";
-		/*
-		 * Configure pull-down on RTS. As RTS is active low
-		 * signal, pull it low to indicate the BT SoC that it
-		 * can wakeup the system anytime from suspend state by
-		 * pulling RX low (by sending wakeup bytes).
-		 */
-		bias-pull-down;
+		bias-pull-up;
 	};
 
-	qup_uart7_sleep_rx: qup-uart7-sleep-rx {
-		pins = "gpio31";
+	sar1_irq_odl: sar0-irq-odl {
+		pins = "gpio140";
 		function = "gpio";
-		/*
-		 * Configure a pull-up on RX. This is needed to avoid
-		 * garbage data when the TX pin of the Bluetooth module
-		 * is floating which may cause spurious wakeups.
-		 */
 		bias-pull-up;
 	};
 
-	qup_uart7_sleep_tx: qup-uart7-sleep-tx {
-		pins = "gpio30";
+	sd_cd_odl: sd-cd-odl {
+		pins = "gpio91";
 		function = "gpio";
-		/*
-		 * Configure pull-up on TX when it isn't actively driven
-		 * to prevent BT SoC from receiving garbage during sleep.
-		 */
 		bias-pull-up;
 	};
 
-	tp_int_odl: tp-int-odl {
-		pins = "gpio102";
+	ssd_en: ssd-en {
+		pins = "gpio51";
 		function = "gpio";
-		/* Has external pullup */
 		bias-disable;
+		drive-strength = <2>;
 	};
 
-	ts_int_l: ts-int-l {
-		pins = "gpio81";
-		function = "gpio";
-		/* Has external pullup */
-		bias-pull-up;
-	};
-
-	ts_reset_l: ts-reset-l {
-		pins = "gpio105";
+	ssd_rst_l: ssd-rst-l {
+		pins = "gpio2";
 		function = "gpio";
-		/* Has external pullup */
 		bias-disable;
 		drive-strength = <2>;
+		output-low;
 	};
 
-	uf_cam_en: uf-cam-en {
-		pins = "gpio6";
+	tp_int_odl: tp-int-odl {
+		pins = "gpio7";
 		function = "gpio";
-		drive-strength = <2>;
-		/* Has external pulldown */
+		/* Has external pullup */
 		bias-disable;
 	};
 
 	wf_cam_en: wf-cam-en {
-		pins = "gpio7";
+		pins = "gpio119";
 		function = "gpio";
-		drive-strength = <2>;
 		/* Has external pulldown */
 		bias-disable;
+		drive-strength = <2>;
 	};
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi
index 0896a6151817..a7c346aa3b02 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp-ec-h1.dtsi
@@ -20,7 +20,7 @@ ap_ec_spi: &spi10 {
 		pinctrl-0 = <&ap_ec_int_l>;
 		spi-max-frequency = <3000000>;
 
-		cros_ec_pwm: ec-pwm {
+		cros_ec_pwm: pwm {
 			compatible = "google,cros-ec-pwm";
 			#pwm-cells = <1>;
 		};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
index 9b991ba5daaf..a7be133a782f 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
@@ -56,6 +56,10 @@
 	};
 };
 
+&bluetooth {
+	vddio-supply = <&vreg_l19b_1p8>;
+};
+
 &ipa {
 	status = "okay";
 	modem-init;
@@ -80,3 +84,19 @@
 		qcom,pre-scaling = <1 1>;
 	};
 };
+
+&usb_2 {
+	status = "okay";
+};
+
+&usb_2_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_2_hsphy {
+	status = "okay";
+
+	vdda-pll-supply = <&vreg_l10c_0p8>;
+	vdda33-supply = <&vreg_l2b_3p0>;
+	vdda18-supply = <&vreg_l1c_1p8>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index d623d71d8bd4..ecbf2b89d896 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -5,7 +5,6 @@
  * Copyright (c) 2021, The Linux Foundation. All rights reserved.
  */
 
-#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
 #include <dt-bindings/input/linux-event-codes.h>
 #include "sc7280.dtsi"
@@ -13,7 +12,14 @@
 #include "pm8350c.dtsi"
 #include "pmk8350.dtsi"
 
+#include "sc7280-chrome-common.dtsi"
+
 / {
+	aliases {
+		bluetooth0 = &bluetooth;
+		serial1 = &uart7;
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		label = "gpio-keys";
@@ -45,58 +51,6 @@
 	};
 };
 
-/*
- * Reserved memory changes
- *
- * Delete all unused memory nodes and define the peripheral memory regions
- * required by the board dts.
- *
- */
-
-/delete-node/ &hyp_mem;
-/delete-node/ &xbl_mem;
-/delete-node/ &reserved_xbl_uefi_log;
-/delete-node/ &sec_apps_mem;
-
-/* Increase the size from 2.5MB to 8MB */
-&rmtfs_mem {
-	reg = <0x0 0x9c900000 0x0 0x800000>;
-};
-
-/ {
-	reserved-memory {
-		adsp_mem: memory@86700000 {
-			reg = <0x0 0x86700000 0x0 0x2800000>;
-			no-map;
-		};
-
-		camera_mem: memory@8ad00000 {
-			reg = <0x0 0x8ad00000 0x0 0x500000>;
-			no-map;
-		};
-
-		venus_mem: memory@8b200000 {
-			reg = <0x0 0x8b200000 0x0 0x500000>;
-			no-map;
-		};
-
-		mpss_mem: memory@8b800000 {
-			reg = <0x0 0x8b800000 0x0 0xf600000>;
-			no-map;
-		};
-
-		wpss_mem: memory@9ae00000 {
-			reg = <0x0 0x9ae00000 0x0 0x1900000>;
-			no-map;
-		};
-
-		mba_mem: memory@9c700000 {
-			reg = <0x0 0x9c700000 0x0 0x200000>;
-			no-map;
-		};
-	};
-};
-
 &apps_rsc {
 	pm7325-regulators {
 		compatible = "qcom,pm7325-rpmh-regulators";
@@ -313,20 +267,6 @@
 	vcc-supply = <&vreg_l1c_1p8>;
 };
 
-&qspi {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data01>;
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <37500000>;
-		spi-tx-bus-width = <2>;
-		spi-rx-bus-width = <2>;
-	};
-};
-
 &qupv3_id_0 {
 	status = "okay";
 };
@@ -335,20 +275,9 @@
 	status = "okay";
 };
 
-&remoteproc_mpss {
-	status = "okay";
-	compatible = "qcom,sc7280-mss-pil";
-	iommus = <&apps_smmu 0x124 0x0>, <&apps_smmu 0x488 0x7>;
-	memory-region = <&mba_mem &mpss_mem>;
-};
-
 &sdhc_1 {
 	status = "okay";
 
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdc1_on>;
-	pinctrl-1 = <&sdc1_off>;
-
 	non-removable;
 	no-sd;
 	no-sdio;
@@ -360,9 +289,8 @@
 &sdhc_2 {
 	status = "okay";
 
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sdc2_on>;
-	pinctrl-1 = <&sdc2_off>;
+	pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>, <&sd_cd>;
+	pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>, <&sd_cd>;
 
 	vmmc-supply = <&vreg_l9c_2p9>;
 	vqmmc-supply = <&vreg_l6c_2p9>;
@@ -398,22 +326,6 @@
 	vdda-pll-supply = <&vreg_l1b_0p8>;
 };
 
-&usb_2 {
-	status = "okay";
-};
-
-&usb_2_dwc3 {
-	dr_mode = "peripheral";
-};
-
-&usb_2_hsphy {
-	status = "okay";
-
-	vdda-pll-supply = <&vreg_l10c_0p8>;
-	vdda33-supply = <&vreg_l2b_3p0>;
-	vdda18-supply = <&vreg_l1c_1p8>;
-};
-
 &uart7 {
 	status = "okay";
 
@@ -422,10 +334,31 @@
 				<&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
 	pinctrl-names = "default", "sleep";
 	pinctrl-1 = <&qup_uart7_sleep_cts>, <&qup_uart7_sleep_rts>, <&qup_uart7_sleep_tx>, <&qup_uart7_sleep_rx>;
+
+	bluetooth: bluetooth {
+		compatible = "qcom,wcn6750-bt";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_en>, <&sw_ctrl>;
+		enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>;
+		swctrl-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
+		vddaon-supply = <&vreg_s7b_0p9>;
+		vddbtcxmx-supply = <&vreg_s7b_0p9>;
+		vddrfacmn-supply = <&vreg_s7b_0p9>;
+		vddrfa0p8-supply = <&vreg_s7b_0p9>;
+		vddrfa1p7-supply = <&vreg_s1b_1p8>;
+		vddrfa1p2-supply = <&vreg_s8b_1p2>;
+		vddrfa2p2-supply = <&vreg_s1c_2p2>;
+		vddasd-supply = <&vreg_l11c_2p8>;
+		max-speed = <3200000>;
+	};
 };
 
 /* PINCTRL - additions to nodes defined in sc7280.dtsi */
 
+&dp_hot_plug_det {
+	bias-disable;
+};
+
 &pm7325_gpios {
 	key_vol_up_default: key-vol-up-default {
 		pins = "gpio6";
@@ -437,6 +370,11 @@
 	};
 };
 
+&pcie1_clkreq_n {
+	bias-pull-up;
+	drive-strength = <2>;
+};
+
 &qspi_cs0 {
 	bias-disable;
 };
@@ -490,7 +428,48 @@
 	bias-pull-up;
 };
 
+&sdc1_clk {
+	bias-disable;
+	drive-strength = <16>;
+};
+
+&sdc1_cmd {
+	bias-pull-up;
+	drive-strength = <10>;
+};
+
+&sdc1_data {
+	bias-pull-up;
+	drive-strength = <10>;
+};
+
+&sdc1_rclk {
+	bias-pull-down;
+};
+
+&sdc2_clk {
+	bias-disable;
+	drive-strength = <16>;
+};
+
+&sdc2_cmd {
+	bias-pull-up;
+	drive-strength = <10>;
+};
+
+&sdc2_data {
+	bias-pull-up;
+	drive-strength = <10>;
+};
+
 &tlmm {
+	bt_en: bt-en {
+		pins = "gpio85";
+		function = "gpio";
+		output-low;
+		bias-disable;
+	};
+
 	nvme_pwren: nvme-pwren {
 		function = "gpio";
 	};
@@ -554,47 +533,17 @@
 		 */
 		bias-pull-up;
 	};
-};
-
-&sdc1_on {
-	clk {
-		bias-disable;
-		drive-strength = <16>;
-	};
-
-	cmd {
-		bias-pull-up;
-		drive-strength = <10>;
-	};
 
-	data {
+	sd_cd: sd-cd {
+		pins = "gpio91";
+		function = "gpio";
 		bias-pull-up;
-		drive-strength = <10>;
 	};
 
-	rclk {
+	sw_ctrl: sw-ctrl {
+		pins = "gpio86";
+		function = "gpio";
 		bias-pull-down;
 	};
 };
 
-&sdc2_on {
-	clk {
-		bias-disable;
-		drive-strength = <16>;
-	};
-
-	cmd {
-		bias-pull-up;
-		drive-strength = <10>;
-	};
-
-	data {
-		bias-pull-up;
-		drive-strength = <10>;
-	};
-
-	sd-cd {
-		pins = "gpio91";
-		bias-pull-up;
-	};
-};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp2.dts b/arch/arm64/boot/dts/qcom/sc7280-idp2.dts
index 0382c770650a..73b9911dd802 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp2.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp2.dts
@@ -23,6 +23,10 @@
 	};
 };
 
+&bluetooth {
+	vddio-supply = <&vreg_l18b_1p8>;
+};
+
 &nvme_pwren {
 	pins = "gpio51";
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
new file mode 100644
index 000000000000..b833ba1e8f4a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
@@ -0,0 +1,547 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sc7280 Qcard device tree source
+ *
+ * Qcard PCB has the processor, RAM, eMMC (if stuffed), and eDP connector (if
+ * stuffed) on it. This device tree tries to encapsulate all the things that
+ * all boards using Qcard will have in common. Given that there are stuffing
+ * options, some things may be left with status "disabled" and enabled in
+ * the actual board device tree files.
+ *
+ * Copyright 2022 Google LLC.
+ */
+
+#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "sc7280.dtsi"
+
+/* PMICs depend on spmi_bus label and so must come after SoC */
+#include "pm7325.dtsi"
+#include "pm8350c.dtsi"
+#include "pmk8350.dtsi"
+
+/ {
+	aliases {
+		bluetooth0 = &bluetooth;
+		serial0 = &uart5;
+		serial1 = &uart7;
+	};
+};
+
+&apps_rsc {
+	/*
+	 * Regulators are given labels corresponding to the various names
+	 * they are referred to on schematics. They are also given labels
+	 * corresponding to named voltage inputs on the SoC or components
+	 * bundled with the SoC (like radio companion chips). We totally
+	 * ignore it when one regulator is the input to another regulator.
+	 * That's handled automatically by the initial config given to
+	 * RPMH by the firmware.
+	 *
+	 * Regulators that the HLOS (High Level OS) doesn't touch at all
+	 * are left out of here since they are managed elsewhere.
+	 */
+
+	pm7325-regulators {
+		compatible = "qcom,pm7325-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd19_pmu_pcie_i:
+		vdd19_pmu_rfa_i:
+		vreg_s1b_1p856: smps1 {
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vdd_pmu_aon_i:
+		vdd09_pmu_rfa_i:
+		vdd095_mx_pmu:
+		vdd095_pmu:
+		vreg_s7b_0p952: smps7 {
+			regulator-min-microvolt = <535000>;
+			regulator-max-microvolt = <1120000>;
+		};
+
+		vdd13_pmu_rfa_i:
+		vdd13_pmu_pcie_i:
+		vreg_s8b_1p256: smps8 {
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1500000>;
+		};
+
+		vdd_a_usbssdp_0_core:
+		vreg_l1b_0p912: ldo1 {
+			regulator-min-microvolt = <825000>;
+			regulator-max-microvolt = <925000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_a_usbhs_3p1:
+		vreg_l2b_3p072: ldo2 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_a_csi_0_1_1p2:
+		vdd_a_csi_2_3_1p2:
+		vdd_a_csi_4_1p2:
+		vdd_a_dsi_0_1p2:
+		vdd_a_edp_0_1p2:
+		vdd_a_qlink_0_1p2:
+		vdd_a_qlink_1_1p2:
+		vdd_a_pcie_0_1p2:
+		vdd_a_pcie_1_1p2:
+		vdd_a_ufs_0_1p2:
+		vdd_a_usbssdp_0_1p2:
+		vreg_l6b_1p2: ldo6 {
+			regulator-min-microvolt = <1140000>;
+			regulator-max-microvolt = <1260000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		/*
+		 * Despite the fact that this is named to be 2.5V on the
+		 * schematic, it powers eMMC which doesn't accept 2.5V
+		 */
+		vreg_l7b_2p5: ldo7 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_px_wcd9385:
+		vdd_txrx:
+		vddpx_0:
+		vddpx_3:
+		vddpx_7:
+		vreg_l18b_1p8: ldo18 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_1p8:
+		vdd_px_sdr735:
+		vdd_pxm:
+		vdd18_io:
+		vddio_px_1:
+		vddio_px_2:
+		vddio_px_3:
+		vddpx_ts:
+		vddpx_wl4otp:
+		vreg_l19b_1p8: ldo19 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	pm8350c-regulators {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd22_wlbtpa_ch0:
+		vdd22_wlbtpa_ch1:
+		vdd22_wlbtppa_ch0:
+		vdd22_wlbtppa_ch1:
+		vdd22_wlpa5g_ch0:
+		vdd22_wlpa5g_ch1:
+		vdd22_wlppa5g_ch0:
+		vdd22_wlppa5g_ch1:
+		vreg_s1c_2p2: smps1 {
+			regulator-min-microvolt = <2190000>;
+			regulator-max-microvolt = <2210000>;
+		};
+
+		lp4_vdd2_1p052:
+		vreg_s9c_0p676: smps9 {
+			regulator-min-microvolt = <1010000>;
+			regulator-max-microvolt = <1170000>;
+		};
+
+		vdda_apc_cs_1p8:
+		vdda_gfx_cs_1p8:
+		vdda_turing_q6_cs_1p8:
+		vdd_a_cxo_1p8:
+		vdd_a_qrefs_1p8:
+		vdd_a_usbhs_1p8:
+		vdd_qfprom:
+		vreg_l1c_1p8: ldo1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_1p8: ldo2 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_3p0: ldo3 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3540000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_5:
+		vreg_l4c_1p8_3p0: ldo4 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_6:
+		vreg_l5c_1p8_3p0: ldo5 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_2:
+		vreg_l6c_2p96: ldo6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_3p0: ldo7 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p8: ldo8 {
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p96: ldo9 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_a_csi_0_1_0p9:
+		vdd_a_csi_2_3_0p9:
+		vdd_a_csi_4_0p9:
+		vdd_a_dsi_0_0p9:
+		vdd_a_dsi_0_pll_0p9:
+		vdd_a_edp_0_0p9:
+		vdd_a_gnss_0p9:
+		vdd_a_pcie_0_core:
+		vdd_a_pcie_1_core:
+		vdd_a_qlink_0_0p9:
+		vdd_a_qlink_0_0p9_ck:
+		vdd_a_qlink_1_0p9:
+		vdd_a_qlink_1_0p9_ck:
+		vdd_a_qrefs_0p875_0:
+		vdd_a_qrefs_0p875_1:
+		vdd_a_qrefs_0p875_2:
+		vdd_a_qrefs_0p875_3:
+		vdd_a_qrefs_0p875_4_5:
+		vdd_a_qrefs_0p875_6:
+		vdd_a_qrefs_0p875_7:
+		vdd_a_qrefs_0p875_8:
+		vdd_a_qrefs_0p875_9:
+		vdd_a_ufs_0_core:
+		vdd_a_usbhs_core:
+		vreg_l10c_0p88: ldo10 {
+			regulator-min-microvolt = <720000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_2p8: ldo11 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12c_1p8: ldo12 {
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13c_3p0: ldo13 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_flash:
+		vdd_iris_rgb:
+		vdd_mic_bias:
+		vreg_bob: bob {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+	};
+};
+
+/* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */
+
+&ipa {
+	status = "okay";
+	modem-init;
+};
+
+&pcie1_phy {
+	vdda-phy-supply = <&vreg_l10c_0p88>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+};
+
+&pmk8350_vadc {
+	pmk8350-die-temp@3 {
+		reg = <PMK8350_ADC7_DIE_TEMP>;
+		label = "pmk8350_die_temp";
+		qcom,pre-scaling = <1 1>;
+	};
+
+	pmr735a-die-temp@403 {
+		reg = <PMR735A_ADC7_DIE_TEMP>;
+		label = "pmr735a_die_temp";
+		qcom,pre-scaling = <1 1>;
+	};
+};
+
+&qfprom {
+	vcc-supply = <&vdd_qfprom>;
+};
+
+/* For eMMC. NOTE: not all Qcards have eMMC stuffed */
+&sdhc_1 {
+	vmmc-supply = <&vreg_l7b_2p5>;
+	vqmmc-supply = <&vreg_l19b_1p8>;
+
+	non-removable;
+	no-sd;
+	no-sdio;
+};
+
+uart_dbg: &uart5 {
+	compatible = "qcom,geni-debug-uart";
+	status = "okay";
+};
+
+mos_bt_uart: &uart7 {
+	status = "okay";
+
+	/delete-property/ interrupts;
+	interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>,
+				<&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-1 = <&qup_uart7_sleep_cts>, <&qup_uart7_sleep_rts>, <&qup_uart7_sleep_tx>, <&qup_uart7_sleep_rx>;
+
+	bluetooth: bluetooth {
+		compatible = "qcom,wcn6750-bt";
+		pinctrl-names = "default";
+		pinctrl-0 = <&mos_bt_en>;
+		enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>;
+		swctrl-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
+		vddaon-supply = <&vreg_s7b_0p952>;
+		vddbtcxmx-supply = <&vreg_s7b_0p952>;
+		vddrfacmn-supply = <&vreg_s7b_0p952>;
+		vddrfa0p8-supply = <&vreg_s7b_0p952>;
+		vddrfa1p7-supply = <&vdd19_pmu_rfa_i>;
+		vddrfa1p2-supply = <&vdd13_pmu_rfa_i>;
+		vddrfa2p2-supply = <&vreg_s1c_2p2>;
+		vddasd-supply = <&vreg_l11c_2p8>;
+		vddio-supply = <&vreg_l18b_1p8>;
+		max-speed = <3200000>;
+	};
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vdd_a_usbhs_core>;
+	vdda33-supply = <&vdd_a_usbhs_3p1>;
+	vdda18-supply = <&vdd_a_usbhs_1p8>;
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vdd_a_usbssdp_0_1p2>;
+	vdda-pll-supply = <&vdd_a_usbssdp_0_core>;
+};
+
+&usb_2_hsphy {
+	vdda-pll-supply = <&vdd_a_usbhs_core>;
+	vdda33-supply = <&vdd_a_usbhs_3p1>;
+	vdda18-supply = <&vdd_a_usbhs_1p8>;
+};
+
+/*
+ * PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES
+ *
+ * NOTE: In general if pins leave the Qcard then the pinctrl goes in the
+ * baseboard or board device tree, not here.
+ */
+
+/*
+ * For ts_i2c
+ *
+ * Technically this i2c bus actually leaves the Qcard, but it leaves directly
+ * via the eDP connector (it doesn't hit the baseboard). The external pulls
+ * are on Qcard.
+ */
+&qup_i2c13_data_clk {
+	/* Has external pull */
+	bias-disable;
+	drive-strength = <2>;
+};
+
+/* For mos_bt_uart */
+&qup_uart7_cts {
+	/* Configure a pull-down on CTS to match the pull of the Bluetooth module. */
+	bias-pull-down;
+};
+
+/* For mos_bt_uart */
+&qup_uart7_rts {
+	/* We'll drive RTS, so no pull */
+	bias-disable;
+	drive-strength = <2>;
+};
+
+/* For mos_bt_uart */
+&qup_uart7_tx {
+	/* We'll drive TX, so no pull */
+	bias-disable;
+	drive-strength = <2>;
+};
+
+/* For mos_bt_uart */
+&qup_uart7_rx {
+	/*
+	 * Configure a pull-up on RX. This is needed to avoid
+	 * garbage data when the TX pin of the Bluetooth module is
+	 * in tri-state (module powered off or not driving the
+	 * signal yet).
+	 */
+	bias-pull-up;
+};
+
+/* eMMC, if stuffed, is straight on the Qcard */
+&sdc1_clk {
+	bias-disable;
+	drive-strength = <16>;
+};
+
+&sdc1_cmd {
+	bias-pull-up;
+	drive-strength = <10>;
+};
+
+&sdc1_data {
+	bias-pull-up;
+	drive-strength = <10>;
+};
+
+&sdc1_rclk {
+	bias-pull-down;
+};
+
+/*
+ * PINCTRL - QCARD
+ *
+ * This has entries that are defined by Qcard even if they go to the main
+ * board. In cases where the pulls may be board dependent we defer those
+ * settings to the board device tree. Drive strengths tend to be assinged here
+ * but could conceivably be overwridden by board device trees.
+ */
+
+&pm8350c_gpios {
+	pmic_edp_bl_en: pmic-edp-bl-en {
+		pins = "gpio7";
+		function = "normal";
+		bias-disable;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+
+		/* Force backlight to be disabled to match state at boot. */
+		output-low;
+	};
+
+	pmic_edp_bl_pwm: pmic-edp-bl-pwm {
+		pins = "gpio8";
+		function = "func1";
+		bias-disable;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+		output-low;
+		power-source = <0>;
+	};
+};
+
+&tlmm {
+	mos_bt_en: mos-bt-en {
+		pins = "gpio85";
+		function = "gpio";
+		drive-strength = <2>;
+		output-low;
+	};
+
+	/* For mos_bt_uart */
+	qup_uart7_sleep_cts: qup-uart7-sleep-cts {
+		pins = "gpio28";
+		function = "gpio";
+		/*
+		 * Configure a pull-down on CTS to match the pull of
+		 * the Bluetooth module.
+		 */
+		bias-pull-down;
+	};
+
+	/* For mos_bt_uart */
+	qup_uart7_sleep_rts: qup-uart7-sleep-rts {
+		pins = "gpio29";
+		function = "gpio";
+		/*
+		 * Configure pull-down on RTS. As RTS is active low
+		 * signal, pull it low to indicate the BT SoC that it
+		 * can wakeup the system anytime from suspend state by
+		 * pulling RX low (by sending wakeup bytes).
+		 */
+		bias-pull-down;
+	};
+
+	/* For mos_bt_uart */
+	qup_uart7_sleep_rx: qup-uart7-sleep-rx {
+		pins = "gpio31";
+		function = "gpio";
+		/*
+		 * Configure a pull-up on RX. This is needed to avoid
+		 * garbage data when the TX pin of the Bluetooth module
+		 * is floating which may cause spurious wakeups.
+		 */
+		bias-pull-up;
+	};
+
+	/* For mos_bt_uart */
+	qup_uart7_sleep_tx: qup-uart7-sleep-tx {
+		pins = "gpio30";
+		function = "gpio";
+		/*
+		 * Configure pull-up on TX when it isn't actively driven
+		 * to prevent BT SoC from receiving garbage during sleep.
+		 */
+		bias-pull-up;
+	};
+
+	ts_int_conn: ts-int-conn {
+		pins = "gpio55";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	ts_rst_conn: ts-rst-conn {
+		pins = "gpio54";
+		function = "gpio";
+		bias-pull-up;
+		drive-strength = <2>;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 937c2e0e93eb..f0b64be63c21 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -4,12 +4,14 @@
  *
  * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved.
  */
-
+#include <dt-bindings/clock/qcom,camcc-sc7280.h>
 #include <dt-bindings/clock/qcom,dispcc-sc7280.h>
 #include <dt-bindings/clock/qcom,gcc-sc7280.h>
 #include <dt-bindings/clock/qcom,gpucc-sc7280.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/clock/qcom,videocc-sc7280.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sc7280.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/mailbox/qcom-ipcc.h>
@@ -162,6 +164,9 @@
 					   &LITTLE_CPU_SLEEP_1
 					   &CLUSTER_SLEEP_0>;
 			next-level-cache = <&L2_0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
+					<&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			#cooling-cells = <2>;
 			L2_0: l2-cache {
@@ -182,6 +187,9 @@
 					   &LITTLE_CPU_SLEEP_1
 					   &CLUSTER_SLEEP_0>;
 			next-level-cache = <&L2_100>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
+					<&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			#cooling-cells = <2>;
 			L2_100: l2-cache {
@@ -199,6 +207,9 @@
 					   &LITTLE_CPU_SLEEP_1
 					   &CLUSTER_SLEEP_0>;
 			next-level-cache = <&L2_200>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
+					<&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			#cooling-cells = <2>;
 			L2_200: l2-cache {
@@ -216,6 +227,9 @@
 					   &LITTLE_CPU_SLEEP_1
 					   &CLUSTER_SLEEP_0>;
 			next-level-cache = <&L2_300>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
+					<&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			#cooling-cells = <2>;
 			L2_300: l2-cache {
@@ -233,6 +247,9 @@
 					   &BIG_CPU_SLEEP_1
 					   &CLUSTER_SLEEP_0>;
 			next-level-cache = <&L2_400>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
+					<&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			#cooling-cells = <2>;
 			L2_400: l2-cache {
@@ -250,6 +267,9 @@
 					   &BIG_CPU_SLEEP_1
 					   &CLUSTER_SLEEP_0>;
 			next-level-cache = <&L2_500>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
+					<&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			#cooling-cells = <2>;
 			L2_500: l2-cache {
@@ -267,6 +287,9 @@
 					   &BIG_CPU_SLEEP_1
 					   &CLUSTER_SLEEP_0>;
 			next-level-cache = <&L2_600>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
+					<&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			#cooling-cells = <2>;
 			L2_600: l2-cache {
@@ -284,6 +307,9 @@
 					   &BIG_CPU_SLEEP_1
 					   &CLUSTER_SLEEP_0>;
 			next-level-cache = <&L2_700>;
+			operating-points-v2 = <&cpu7_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>,
+					<&epss_l3 MASTER_EPSS_L3_APPS &epss_l3 SLAVE_EPSS_L3_SHARED>;
 			qcom,freq-domain = <&cpufreq_hw 2>;
 			#cooling-cells = <2>;
 			L2_700: l2-cache {
@@ -383,6 +409,211 @@
 		};
 	};
 
+	cpu0_opp_table: cpu0-opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		cpu0_opp_300mhz: opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-peak-kBps = <800000 9600000>;
+		};
+
+		cpu0_opp_691mhz: opp-691200000 {
+			opp-hz = /bits/ 64 <691200000>;
+			opp-peak-kBps = <800000 17817600>;
+		};
+
+		cpu0_opp_806mhz: opp-806400000 {
+			opp-hz = /bits/ 64 <806400000>;
+			opp-peak-kBps = <800000 20889600>;
+		};
+
+		cpu0_opp_941mhz: opp-940800000 {
+			opp-hz = /bits/ 64 <940800000>;
+			opp-peak-kBps = <1804000 24576000>;
+		};
+
+		cpu0_opp_1152mhz: opp-1152000000 {
+			opp-hz = /bits/ 64 <1152000000>;
+			opp-peak-kBps = <2188000 27033600>;
+		};
+
+		cpu0_opp_1325mhz: opp-1324800000 {
+			opp-hz = /bits/ 64 <1324800000>;
+			opp-peak-kBps = <2188000 33792000>;
+		};
+
+		cpu0_opp_1517mhz: opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-peak-kBps = <3072000 38092800>;
+		};
+
+		cpu0_opp_1651mhz: opp-1651200000 {
+			opp-hz = /bits/ 64 <1651200000>;
+			opp-peak-kBps = <3072000 41779200>;
+		};
+
+		cpu0_opp_1805mhz: opp-1804800000 {
+			opp-hz = /bits/ 64 <1804800000>;
+			opp-peak-kBps = <4068000 48537600>;
+		};
+
+		cpu0_opp_1958mhz: opp-1958400000 {
+			opp-hz = /bits/ 64 <1958400000>;
+			opp-peak-kBps = <4068000 48537600>;
+		};
+
+		cpu0_opp_2016mhz: opp-2016000000 {
+			opp-hz = /bits/ 64 <2016000000>;
+			opp-peak-kBps = <6220000 48537600>;
+		};
+	};
+
+	cpu4_opp_table: cpu4-opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		cpu4_opp_691mhz: opp-691200000 {
+			opp-hz = /bits/ 64 <691200000>;
+			opp-peak-kBps = <1804000 9600000>;
+		};
+
+		cpu4_opp_941mhz: opp-940800000 {
+			opp-hz = /bits/ 64 <940800000>;
+			opp-peak-kBps = <2188000 17817600>;
+		};
+
+		cpu4_opp_1229mhz: opp-1228800000 {
+			opp-hz = /bits/ 64 <1228800000>;
+			opp-peak-kBps = <4068000 24576000>;
+		};
+
+		cpu4_opp_1344mhz: opp-1344000000 {
+			opp-hz = /bits/ 64 <1344000000>;
+			opp-peak-kBps = <4068000 24576000>;
+		};
+
+		cpu4_opp_1517mhz: opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-peak-kBps = <4068000 24576000>;
+		};
+
+		cpu4_opp_1651mhz: opp-1651200000 {
+			opp-hz = /bits/ 64 <1651200000>;
+			opp-peak-kBps = <6220000 38092800>;
+		};
+
+		cpu4_opp_1901mhz: opp-1900800000 {
+			opp-hz = /bits/ 64 <1900800000>;
+			opp-peak-kBps = <6220000 44851200>;
+		};
+
+		cpu4_opp_2054mhz: opp-2054400000 {
+			opp-hz = /bits/ 64 <2054400000>;
+			opp-peak-kBps = <6220000 44851200>;
+		};
+
+		cpu4_opp_2112mhz: opp-2112000000 {
+			opp-hz = /bits/ 64 <2112000000>;
+			opp-peak-kBps = <6220000 44851200>;
+		};
+
+		cpu4_opp_2131mhz: opp-2131200000 {
+			opp-hz = /bits/ 64 <2131200000>;
+			opp-peak-kBps = <6220000 44851200>;
+		};
+
+		cpu4_opp_2208mhz: opp-2208000000 {
+			opp-hz = /bits/ 64 <2208000000>;
+			opp-peak-kBps = <6220000 44851200>;
+		};
+
+		cpu4_opp_2400mhz: opp-2400000000 {
+			opp-hz = /bits/ 64 <2400000000>;
+			opp-peak-kBps = <8532000 48537600>;
+		};
+
+		cpu4_opp_2611mhz: opp-2611200000 {
+			opp-hz = /bits/ 64 <2611200000>;
+			opp-peak-kBps = <8532000 48537600>;
+		};
+	};
+
+	cpu7_opp_table: cpu7-opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		cpu7_opp_806mhz: opp-806400000 {
+			opp-hz = /bits/ 64 <806400000>;
+			opp-peak-kBps = <1804000 9600000>;
+		};
+
+		cpu7_opp_1056mhz: opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-peak-kBps = <2188000 17817600>;
+		};
+
+		cpu7_opp_1325mhz: opp-1324800000 {
+			opp-hz = /bits/ 64 <1324800000>;
+			opp-peak-kBps = <4068000 24576000>;
+		};
+
+		cpu7_opp_1517mhz: opp-1516800000 {
+			opp-hz = /bits/ 64 <1516800000>;
+			opp-peak-kBps = <4068000 24576000>;
+		};
+
+		cpu7_opp_1766mhz: opp-1766400000 {
+			opp-hz = /bits/ 64 <1766400000>;
+			opp-peak-kBps = <6220000 38092800>;
+		};
+
+		cpu7_opp_1862mhz: opp-1862400000 {
+			opp-hz = /bits/ 64 <1862400000>;
+			opp-peak-kBps = <6220000 38092800>;
+		};
+
+		cpu7_opp_2035mhz: opp-2035200000 {
+			opp-hz = /bits/ 64 <2035200000>;
+			opp-peak-kBps = <6220000 38092800>;
+		};
+
+		cpu7_opp_2112mhz: opp-2112000000 {
+			opp-hz = /bits/ 64 <2112000000>;
+			opp-peak-kBps = <6220000 44851200>;
+		};
+
+		cpu7_opp_2208mhz: opp-2208000000 {
+			opp-hz = /bits/ 64 <2208000000>;
+			opp-peak-kBps = <6220000 44851200>;
+		};
+
+		cpu7_opp_2381mhz: opp-2380800000 {
+			opp-hz = /bits/ 64 <2380800000>;
+			opp-peak-kBps = <6832000 44851200>;
+		};
+
+		cpu7_opp_2400mhz: opp-2400000000 {
+			opp-hz = /bits/ 64 <2400000000>;
+			opp-peak-kBps = <8532000 48537600>;
+		};
+
+		cpu7_opp_2515mhz: opp-2515200000 {
+			opp-hz = /bits/ 64 <2515200000>;
+			opp-peak-kBps = <8532000 48537600>;
+		};
+
+		cpu7_opp_2707mhz: opp-2707200000 {
+			opp-hz = /bits/ 64 <2707200000>;
+			opp-peak-kBps = <8532000 48537600>;
+		};
+
+		cpu7_opp_3014mhz: opp-3014400000 {
+			opp-hz = /bits/ 64 <3014400000>;
+			opp-peak-kBps = <8532000 48537600>;
+		};
+	};
+
 	memory@80000000 {
 		device_type = "memory";
 		/* We expect the bootloader to fill in the size */
@@ -615,6 +846,9 @@
 
 		sdhc_1: sdhci@7c4000 {
 			compatible = "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdc1_clk>, <&sdc1_cmd>, <&sdc1_data>, <&sdc1_rclk>;
+			pinctrl-1 = <&sdc1_clk_sleep>, <&sdc1_cmd_sleep>, <&sdc1_data_sleep>, <&sdc1_rclk_sleep>;
 			status = "disabled";
 
 			reg = <0 0x007c4000 0 0x1000>,
@@ -1714,6 +1948,8 @@
 			interconnect-names = "memory",
 					     "config";
 
+			qcom,qmp = <&aoss_qmp>;
+
 			qcom,smem-states = <&ipa_smp2p_out 0>,
 					   <&ipa_smp2p_out 1>;
 			qcom,smem-state-names = "ipa-clock-enabled-valid",
@@ -1790,7 +2026,7 @@
 			};
 		};
 
-		gmu: gmu@3d69000 {
+		gmu: gmu@3d6a000 {
 			compatible="qcom,adreno-gmu-635.0", "qcom,adreno-gmu";
 			reg = <0 0x03d6a000 0 0x34000>,
 				<0 0x3de0000 0 0x10000>,
@@ -2424,6 +2660,9 @@
 
 		sdhc_2: sdhci@8804000 {
 			compatible = "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5";
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>;
+			pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>;
 			status = "disabled";
 
 			reg = <0 0x08804000 0 0x1000>;
@@ -2761,13 +3000,31 @@
 			#power-domain-cells = <1>;
 		};
 
+		camcc: clock-controller@ad00000 {
+			compatible = "qcom,sc7280-camcc";
+			reg = <0 0x0ad00000 0 0x10000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				<&rpmhcc RPMH_CXO_CLK_A>,
+				<&sleep_clk>;
+			clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		dispcc: clock-controller@af00000 {
 			compatible = "qcom,sc7280-dispcc";
 			reg = <0 0xaf00000 0 0x20000>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
-				 <0>, <0>, <0>, <0>, <0>, <0>;
-			clock-names = "bi_tcxo", "gcc_disp_gpll0_clk",
+				 <&mdss_dsi_phy 0>,
+				 <&mdss_dsi_phy 1>,
+				 <&dp_phy 0>,
+				 <&dp_phy 1>,
+				 <&mdss_edp_phy 0>,
+				 <&mdss_edp_phy 1>;
+			clock-names = "bi_tcxo",
+				      "gcc_disp_gpll0_clk",
 				      "dsi0_phy_pll_out_byteclk",
 				      "dsi0_phy_pll_out_dsiclk",
 				      "dp_phy_pll_link_clk",
@@ -2779,6 +3036,389 @@
 			#power-domain-cells = <1>;
 		};
 
+		mdss: display-subsystem@ae00000 {
+			compatible = "qcom,sc7280-mdss";
+			reg = <0 0x0ae00000 0 0x1000>;
+			reg-names = "mdss";
+
+			power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>;
+
+			clocks = <&gcc GCC_DISP_AHB_CLK>,
+				 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+				<&dispcc DISP_CC_MDSS_MDP_CLK>;
+			clock-names = "iface",
+				      "ahb",
+				      "core";
+
+			assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>;
+			assigned-clock-rates = <300000000>;
+
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interconnects = <&mmss_noc MASTER_MDP0 0 &mc_virt SLAVE_EBI1 0>;
+			interconnect-names = "mdp0-mem";
+
+			iommus = <&apps_smmu 0x900 0x402>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			mdss_mdp: display-controller@ae01000 {
+				compatible = "qcom,sc7280-dpu";
+				reg = <0 0x0ae01000 0 0x8f030>,
+					<0 0x0aeb0000 0 0x2008>;
+				reg-names = "mdp", "vbif";
+
+				clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+					<&gcc GCC_DISP_SF_AXI_CLK>,
+					<&dispcc DISP_CC_MDSS_AHB_CLK>,
+					<&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+					<&dispcc DISP_CC_MDSS_MDP_CLK>,
+					<&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "bus",
+					      "nrt_bus",
+					      "iface",
+					      "lut",
+					      "core",
+					      "vsync";
+				assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
+						<&dispcc DISP_CC_MDSS_VSYNC_CLK>,
+						<&dispcc DISP_CC_MDSS_AHB_CLK>;
+				assigned-clock-rates = <300000000>,
+							<19200000>,
+							<19200000>;
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&rpmhpd SC7280_CX>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&dsi0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						dpu_intf5_out: endpoint {
+							remote-endpoint = <&edp_in>;
+						};
+					};
+
+					port@2 {
+						reg = <2>;
+						dpu_intf0_out: endpoint {
+							remote-endpoint = <&dp_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-200000000 {
+						opp-hz = /bits/ 64 <200000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-380000000 {
+						opp-hz = /bits/ 64 <380000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-506666667 {
+						opp-hz = /bits/ 64 <506666667>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi: dsi@ae94000 {
+				compatible = "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae94000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmhpd SC7280_CX>;
+
+				phys = <&mdss_dsi_phy>;
+				phy-names = "dsi";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						dsi0_out: endpoint {
+						};
+					};
+				};
+
+				dsi_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-187500000 {
+						opp-hz = /bits/ 64 <187500000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-300000000 {
+						opp-hz = /bits/ 64 <300000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-358000000 {
+						opp-hz = /bits/ 64 <358000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+				};
+			};
+
+			mdss_dsi_phy: phy@ae94400 {
+				compatible = "qcom,sc7280-dsi-phy-7nm";
+				reg = <0 0x0ae94400 0 0x200>,
+				      <0 0x0ae94600 0 0x280>,
+				      <0 0x0ae94900 0 0x280>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+
+			mdss_edp: edp@aea0000 {
+				compatible = "qcom,sc7280-edp";
+				pinctrl-names = "default";
+				pinctrl-0 = <&edp_hot_plug_det>;
+
+				reg = <0 0xaea0000 0 0x200>,
+				      <0 0xaea0200 0 0x200>,
+				      <0 0xaea0400 0 0xc00>,
+				      <0 0xaea1000 0 0x400>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <14>;
+
+				clocks = <&rpmhcc RPMH_CXO_CLK>,
+					 <&gcc GCC_EDP_CLKREF_EN>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_EDP_AUX_CLK>,
+					 <&dispcc DISP_CC_MDSS_EDP_LINK_CLK>,
+					 <&dispcc DISP_CC_MDSS_EDP_LINK_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK>;
+				clock-names = "core_xo",
+					      "core_ref",
+					      "core_iface",
+					      "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface",
+					      "stream_pixel";
+				#clock-cells = <1>;
+				assigned-clocks = <&dispcc DISP_CC_MDSS_EDP_LINK_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_EDP_PIXEL_CLK_SRC>;
+				assigned-clock-parents = <&mdss_edp_phy 0>, <&mdss_edp_phy 1>;
+
+				phys = <&mdss_edp_phy>;
+				phy-names = "dp";
+
+				operating-points-v2 = <&edp_opp_table>;
+				power-domains = <&rpmhpd SC7280_CX>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						edp_in: endpoint {
+							remote-endpoint = <&dpu_intf5_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						edp_out: endpoint { };
+					};
+				};
+
+				edp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_edp_phy: phy@aec2a00 {
+				compatible = "qcom,sc7280-edp-phy";
+
+				reg = <0 0xaec2a00 0 0x19c>,
+				      <0 0xaec2200 0 0xa0>,
+				      <0 0xaec2600 0 0xa0>,
+				      <0 0xaec2000 0 0x1c0>;
+
+				clocks = <&rpmhcc RPMH_CXO_CLK>,
+					 <&gcc GCC_EDP_CLKREF_EN>;
+				clock-names = "aux",
+					      "cfg_ahb";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				status = "disabled";
+			};
+
+			mdss_dp: displayport-controller@ae90000 {
+				compatible = "qcom,sc7280-dp";
+
+				reg = <0 0x0ae90000 0 0x1400>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <12>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+				clock-names =	"core_iface",
+						"core_aux",
+						"ctrl_link",
+						"ctrl_link_iface",
+						"stream_pixel";
+				#clock-cells = <1>;
+				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+				assigned-clock-parents = <&dp_phy 0>, <&dp_phy 1>;
+				phys = <&dp_phy>;
+				phy-names = "dp";
+
+				operating-points-v2 = <&dp_opp_table>;
+				power-domains = <&rpmhpd SC7280_CX>;
+
+				#sound-dai-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dp_in: endpoint {
+							remote-endpoint = <&dpu_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						dp_out: endpoint { };
+					};
+				};
+
+				dp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+		};
+
 		pdc: interrupt-controller@b220000 {
 			compatible = "qcom,sc7280-pdc", "qcom,pdc";
 			reg = <0 0x0b220000 0 0x30000>;
@@ -2872,11 +3512,19 @@
 			gpio-ranges = <&tlmm 0 0 175>;
 			wakeup-parent = <&pdc>;
 
+			dp_hot_plug_det: dp-hot-plug-det {
+				pins = "gpio47";
+				function = "dp_hot";
+			};
+
+			edp_hot_plug_det: edp-hot-plug-det {
+				pins = "gpio60";
+				function = "edp_hot";
+			};
+
 			pcie1_clkreq_n: pcie1-clkreq-n {
 				pins = "gpio79";
 				function = "pcie1_clkreqn";
-				drive-strength = <2>;
-				bias-pull-up;
 			};
 
 			qspi_clk: qspi-clk {
@@ -3384,83 +4032,6 @@
 				function = "qup07";
 			};
 
-			sdc1_on: sdc1-on {
-				clk {
-					pins = "sdc1_clk";
-				};
-
-				cmd {
-					pins = "sdc1_cmd";
-				};
-
-				data {
-					pins = "sdc1_data";
-				};
-
-				rclk {
-					pins = "sdc1_rclk";
-				};
-			};
-
-			sdc1_off: sdc1-off {
-				clk {
-					pins = "sdc1_clk";
-					drive-strength = <2>;
-					bias-bus-hold;
-				};
-
-				cmd {
-					pins = "sdc1_cmd";
-					drive-strength = <2>;
-					bias-bus-hold;
-				};
-
-				data {
-					pins = "sdc1_data";
-					drive-strength = <2>;
-					bias-bus-hold;
-				};
-
-				rclk {
-					pins = "sdc1_rclk";
-					bias-bus-hold;
-				};
-			};
-
-			sdc2_on: sdc2-on {
-				clk {
-					pins = "sdc2_clk";
-				};
-
-				cmd {
-					pins = "sdc2_cmd";
-				};
-
-				data {
-					pins = "sdc2_data";
-				};
-			};
-
-			sdc2_off: sdc2-off {
-				clk {
-					pins = "sdc2_clk";
-					drive-strength = <2>;
-					bias-bus-hold;
-				};
-
-				cmd {
-					pins ="sdc2_cmd";
-					drive-strength = <2>;
-					bias-bus-hold;
-				};
-
-				data {
-					pins ="sdc2_data";
-					drive-strength = <2>;
-					bias-bus-hold;
-				};
-			};
-
 			qup_uart8_cts: qup-uart8-cts {
 				pins = "gpio32";
 				function = "qup10";
@@ -3620,6 +4191,76 @@
 				pins = "gpio63";
 				function = "qup17";
 			};
+
+			sdc1_clk: sdc1-clk {
+				pins = "sdc1_clk";
+			};
+
+			sdc1_cmd: sdc1-cmd {
+				pins = "sdc1_cmd";
+			};
+
+			sdc1_data: sdc1-data {
+				pins = "sdc1_data";
+			};
+
+			sdc1_rclk: sdc1-rclk {
+				pins = "sdc1_rclk";
+			};
+
+			sdc1_clk_sleep: sdc1-clk-sleep {
+				pins = "sdc1_clk";
+				drive-strength = <2>;
+				bias-bus-hold;
+			};
+
+			sdc1_cmd_sleep: sdc1-cmd-sleep {
+				pins = "sdc1_cmd";
+				drive-strength = <2>;
+				bias-bus-hold;
+			};
+
+			sdc1_data_sleep: sdc1-data-sleep {
+				pins = "sdc1_data";
+				drive-strength = <2>;
+				bias-bus-hold;
+			};
+
+			sdc1_rclk_sleep: sdc1-rclk-sleep {
+				pins = "sdc1_rclk";
+				drive-strength = <2>;
+				bias-bus-hold;
+			};
+
+			sdc2_clk: sdc2-clk {
+				pins = "sdc2_clk";
+			};
+
+			sdc2_cmd: sdc2-cmd {
+				pins = "sdc2_cmd";
+			};
+
+			sdc2_data: sdc2-data {
+				pins = "sdc2_data";
+			};
+
+			sdc2_clk_sleep: sdc2-clk-sleep {
+				pins = "sdc2_clk";
+				drive-strength = <2>;
+				bias-bus-hold;
+			};
+
+			sdc2_cmd_sleep: sdc2-cmd-sleep {
+				pins = "sdc2_cmd";
+				drive-strength = <2>;
+				bias-bus-hold;
+			};
+
+			sdc2_data_sleep: sdc2-data-sleep {
+				pins = "sdc2_data";
+				drive-strength = <2>;
+				bias-bus-hold;
+			};
 		};
 
 		imem@146a5000 {
@@ -3885,6 +4526,14 @@
 			};
 		};
 
+		epss_l3: interconnect@18590000 {
+			compatible = "qcom,sc7280-epss-l3";
+			reg = <0 0x18590000 0 0x1000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+			#interconnect-cells = <1>;
+		};
+
 		cpufreq_hw: cpufreq@18591000 {
 			compatible = "qcom,cpufreq-epss";
 			reg = <0 0x18591000 0 0x1000>,
diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index 9217c3a51f79..240293592ef9 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -2160,7 +2160,7 @@
 				apr {
 					compatible = "qcom,apr-v2";
 					qcom,glink-channels = "apr_audio_svc";
-					qcom,apr-domain = <APR_DOMAIN_ADSP>;
+					qcom,domain = <APR_DOMAIN_ADSP>;
 					#address-cells = <1>;
 					#size-cells = <0>;
 
diff --git a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
new file mode 100644
index 000000000000..8b815b2a60a7
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
@@ -0,0 +1,183 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Luca Weiss <luca@z3ntu.xyz>
+ */
+/dts-v1/;
+
+#include "sdm632.dtsi"
+#include "pm8953.dtsi"
+
+/ {
+	model = "Fairphone 3";
+	compatible = "fairphone,fp3", "qcom,sdm632";
+	chassis-type = "handset";
+	qcom,msm-id = <349 0>;
+	qcom,board-id = <8 0x10000>;
+
+	aliases {
+		mmc0 = &sdhc_1;
+		mmc1 = &sdhc_2;
+		serial0 = &uart_0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		volume-up {
+			label = "volume_up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&hsusb_phy {
+	status = "okay";
+	vdd-supply = <&pm8953_l3>;
+	vdda-pll-supply = <&pm8953_l7>;
+	vdda-phy-dpdm-supply = <&pm8953_l13>;
+};
+
+&pm8953_resin {
+	status = "okay";
+	linux,code = <KEY_VOLUMEDOWN>;
+};
+
+&sdhc_1 {
+	status = "okay";
+	vmmc-supply = <&pm8953_l8>;
+	vqmmc-supply = <&pm8953_l5>;
+};
+
+&sdhc_2 {
+	status = "okay";
+	vmmc-supply = <&pm8953_l11>;
+	vqmmc-supply = <&pm8953_l12>;
+
+	cd-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+};
+
+&rpm_requests {
+	pm8953-regulators {
+		compatible = "qcom,rpm-pm8953-regulators";
+
+		vdd_l1-supply = <&pm8953_s3>;
+		vdd_l2_l3-supply = <&pm8953_s3>;
+		vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>;
+		vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>;
+		vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>;
+
+		pm8953_s3: s3 {
+			regulator-min-microvolt = <984000>;
+			regulator-max-microvolt = <1240000>;
+		};
+		pm8953_s4: s4 {
+			regulator-min-microvolt = <1036000>;
+			regulator-max-microvolt = <2040000>;
+		};
+		pm8953_s5: s5 {
+			regulator-min-microvolt = <1036000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		pm8953_l1: l1 {
+			regulator-min-microvolt = <975000>;
+			regulator-max-microvolt = <1050000>;
+		};
+		pm8953_l2: l2 {
+			regulator-min-microvolt = <975000>;
+			regulator-max-microvolt = <1175000>;
+		};
+		pm8953_l3: l3 {
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <925000>;
+		};
+		pm8953_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		pm8953_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		pm8953_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1900000>;
+		};
+		pm8953_l8: l8 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <2900000>;
+		};
+		pm8953_l9: l9 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+		};
+		pm8953_l10: l10 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+		};
+		pm8953_l11: l11 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+		pm8953_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+		pm8953_l13: l13 {
+			regulator-min-microvolt = <3125000>;
+			regulator-max-microvolt = <3125000>;
+		};
+		pm8953_l16: l16 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+		pm8953_l17: l17 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+		pm8953_l19: l19 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1350000>;
+		};
+		pm8953_l22: l22 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+		pm8953_l23: l23 {
+			regulator-min-microvolt = <975000>;
+			regulator-max-microvolt = <1225000>;
+		};
+	};
+};
+
+&tlmm {
+	/*
+	 * 0-3: unused but protected by TZ
+	 * 135-138: fingerprint reader (SPI)
+	 */
+	gpio-reserved-ranges = <0 4>, <135 4>;
+};
+
+&uart_0 {
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	dr_mode = "peripheral";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm632.dtsi b/arch/arm64/boot/dts/qcom/sdm632.dtsi
new file mode 100644
index 000000000000..645b9f6a801f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm632.dtsi
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/* Copyright (c) 2022, The Linux Foundation. All rights reserved. */
+
+#include "msm8953.dtsi"
+
+/ {
+	thermal-zones {
+		/delete-node/cpu1-thermal;
+		/delete-node/cpu2-thermal;
+		/delete-node/cpu3-thermal;
+
+		cpu0-thermal {
+			thermal-sensors = <&tsens0 13>;
+
+			cooling-maps {
+				map0 {
+					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu4-thermal {
+			thermal-sensors = <&tsens0 5>;
+		};
+
+		cpu5-thermal {
+			thermal-sensors = <&tsens0 6>;
+		};
+
+		cpu6-thermal {
+			thermal-sensors = <&tsens0 7>;
+		};
+
+		cpu7-thermal {
+			thermal-sensors = <&tsens0 8>;
+		};
+	};
+};
+
+/*
+ * SDM632 uses Kryo 250 instead of Cortex A53
+ * CPU0-3 are efficiency cores, CPU4-7 are performance cores
+ */
+&CPU0 {
+	compatible = "qcom,kryo250";
+};
+
+&CPU1 {
+	compatible = "qcom,kryo250";
+};
+
+&CPU2 {
+	compatible = "qcom,kryo250";
+};
+
+&CPU3 {
+	compatible = "qcom,kryo250";
+};
+
+&CPU4 {
+	compatible = "qcom,kryo250";
+	capacity-dmips-mhz = <1980>;
+};
+
+&CPU5 {
+	compatible = "qcom,kryo250";
+	capacity-dmips-mhz = <1980>;
+};
+
+&CPU6 {
+	compatible = "qcom,kryo250";
+	capacity-dmips-mhz = <1980>;
+};
+
+&CPU7 {
+	compatible = "qcom,kryo250";
+	capacity-dmips-mhz = <1980>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
index 4a6285a25f77..e7e4cc5936aa 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
@@ -708,7 +708,7 @@ ap_ts_i2c: &i2c14 {
 		pinctrl-0 = <&ec_ap_int_l>;
 		spi-max-frequency = <3000000>;
 
-		cros_ec_pwm: ec-pwm {
+		cros_ec_pwm: pwm {
 			compatible = "google,cros-ec-pwm";
 			#pwm-cells = <1>;
 		};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index 13f80a0b6faa..28fe45c5d516 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -425,6 +425,10 @@
 	status = "okay";
 };
 
+&gpi_dma0 {
+	status = "okay";
+};
+
 &gpu {
 	status = "okay";
 	zap-shader {
@@ -1125,7 +1129,6 @@
 		port@0 {
 			reg = <0>;
 			csiphy0_ep: endpoint {
-				clock-lanes = <7>;
 				data-lanes = <0 1 2 3>;
 				remote-endpoint = <&ov8856_ep>;
 			};
@@ -1166,7 +1169,6 @@
 
 		port {
 			ov8856_ep: endpoint {
-				clock-lanes = <1>;
 				link-frequencies = /bits/ 64
 					<360000000 180000000>;
 				data-lanes = <1 2 3 4>;
@@ -1211,7 +1213,6 @@
 
 		port {
 			ov7251_ep: endpoint {
-				clock-lanes = <1>;
 				data-lanes = <0 1>;
 //				remote-endpoint = <&csiphy3_ep>;
 			};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
index 7f42e5315ecb..1084d5ce9ac7 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
@@ -54,7 +54,7 @@
 		 * it is otherwise possible for an allocation adjacent to the
 		 * rmtfs_mem region to trigger an XPU violation, causing a crash.
 		 */
-		rmtfs_lower_guard: memory@f5b00000 {
+		rmtfs_lower_guard: rmtfs-lower-guard@f5b00000 {
 			no-map;
 			reg = <0 0xf5b00000 0 0x1000>;
 		};
@@ -63,7 +63,7 @@
 		 * but given the same address every time. Hard code it as this address is
 		 * where the modem firmware expects it to be.
 		 */
-		rmtfs_mem: memory@f5b01000 {
+		rmtfs_mem: rmtfs-mem@f5b01000 {
 			compatible = "qcom,rmtfs-mem";
 			reg = <0 0xf5b01000 0 0x200000>;
 			no-map;
@@ -71,7 +71,7 @@
 			qcom,client-id = <1>;
 			qcom,vmid = <15>;
 		};
-		rmtfs_upper_guard: memory@f5d01000 {
+		rmtfs_upper_guard: rmtfs-upper-guard@f5d01000 {
 			no-map;
 			reg = <0 0xf5d01000 0 0x1000>;
 		};
@@ -80,7 +80,7 @@
 		 * It seems like reserving the old rmtfs_mem region is also needed to prevent
 		 * random crashes which are most likely modem related, more testing needed.
 		 */
-		removed_region: memory@88f00000 {
+		removed_region: removed-region@88f00000 {
 			no-map;
 			reg = <0 0x88f00000 0 0x1c00000>;
 		};
@@ -376,6 +376,17 @@
 	};
 };
 
+&i2c10 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	bq27441_fg: bq27441-battery@55 {
+		compatible = "ti,bq27411";
+		status = "okay";
+		reg = <0x55>;
+	};
+};
+
 &i2c12 {
 	status = "okay";
 	clock-frequency = <400000>;
diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts
index 5936b47dee5f..bf2cf92e8976 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts
@@ -13,6 +13,14 @@
 	chassis-type = "handset";
 	qcom,msm-id = <0x141 0x20001>;
 	qcom,board-id = <8 0 17819 22>;
+
+	battery: battery {
+		compatible = "simple-battery";
+
+		charge-full-design-microamp-hours = <3300000>;
+		voltage-min-design-microvolt = <3400000>;
+		voltage-max-design-microvolt = <4400000>;
+	};
 };
 
 &display_panel {
@@ -20,3 +28,7 @@
 
 	compatible = "samsung,sofef00";
 };
+
+&bq27441_fg {
+	monitored-battery = <&battery>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts
index 78a0b99144e6..1b6b5bf368df 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts
@@ -13,6 +13,14 @@
 	chassis-type = "handset";
 	qcom,msm-id = <0x141 0x20001>;
 	qcom,board-id = <8 0 18801 41>;
+
+	battery: battery {
+		compatible = "simple-battery";
+
+		charge-full-design-microamp-hours = <3700000>;
+		voltage-min-design-microvolt = <3400000>;
+		voltage-max-design-microvolt = <4400000>;
+	};
 };
 
 &display_panel {
@@ -21,6 +29,10 @@
 	compatible = "samsung,s6e3fc2x01";
 };
 
+&bq27441_fg {
+	monitored-battery = <&battery>;
+};
+
 &rmi4_f12 {
 	touchscreen-y-mm = <148>;
 };
diff --git a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
new file mode 100644
index 000000000000..8553c8bf79bd
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
@@ -0,0 +1,736 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2022, Alexander Martinz <amartinz@shiftphones.com>
+ * Copyright (c) 2022, Caleb Connolly <caleb@connolly.tech>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sdm845.dtsi"
+#include "pm8998.dtsi"
+#include "pmi8998.dtsi"
+
+/ {
+	model = "SHIFT SHIFT6mq";
+	compatible = "shift,axolotl", "qcom,sdm845";
+	qcom,msm-id = <321 0x20001>;
+	qcom,board-id = <11 0>;
+
+	aliases {
+		display0 = &framebuffer0;
+		serial0 = &uart9;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0";
+
+		/* Use framebuffer setup by the bootloader. */
+		framebuffer0: framebuffer@9d400000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0x9d400000 0x0 (1080 * 2160 * 4)>;
+			width = <1080>;
+			height = <2160>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&volume_up_gpio>;
+
+		vol-up {
+			label = "volume_up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
+			debounce-interval = <15>;
+		};
+	};
+
+	reserved-memory {
+		framebuffer_region@9d400000 {
+			reg = <0x0 0x9d400000 0x0 (1080 * 2160 * 4)>;
+			no-map;
+		};
+
+		ramoops: ramoops@b0000000 {
+			compatible = "ramoops";
+			reg = <0 0xb0000000 0 0x00400000>;
+			record-size = <0x40000>;
+			console-size = <0x40000>;
+			ftrace-size = <0x40000>;
+			pmsg-size = <0x200000>;
+			ecc-size = <0x0>;
+		};
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+
+		charge-full-design-microamp-hours = <3850000>;
+		voltage-min-design-microvolt = <3600000>;
+		voltage-max-design-microvolt = <4400000>;
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	vreg_s4a_1p8: pm8998-smps4 {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s4a_1p8";
+
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+
+		vin-supply = <&vph_pwr>;
+	};
+};
+
+&adsp_pas {
+	status = "okay";
+	firmware-name = "qcom/sdm845/axolotl/adsp.mbn";
+};
+
+&apps_rsc {
+	pm8998-rpmh-regulators {
+		compatible = "qcom,pm8998-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-s11-supply = <&vph_pwr>;
+		vdd-s12-supply = <&vph_pwr>;
+		vdd-s13-supply = <&vph_pwr>;
+		vdd-l1-l27-supply = <&vreg_s7a_1p025>;
+		vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
+		vdd-l3-l11-supply = <&vreg_s7a_1p025>;
+		vdd-l4-l5-supply = <&vreg_s7a_1p025>;
+		vdd-l6-supply = <&vph_pwr>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
+		vdd-l9-supply = <&vreg_bob>;
+		vdd-l10-l23-l25-supply = <&vreg_bob>;
+		vdd-l13-l19-l21-supply = <&vreg_bob>;
+		vdd-l16-l28-supply = <&vreg_bob>;
+		vdd-l18-l22-supply = <&vreg_bob>;
+		vdd-l20-l24-supply = <&vreg_bob>;
+		vdd-l26-supply = <&vreg_s3a_1p35>;
+		vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
+
+		vreg_s2a_1p125: smps2 {
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		vreg_s3a_1p35: smps3 {
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+		};
+
+		vreg_s5a_2p04: smps5 {
+			regulator-min-microvolt = <1904000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s7a_1p025: smps7 {
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1028000>;
+		};
+
+		vdd_qusb_hs0:
+		vdda_hp_pcie_core:
+		vdda_mipi_csi0_0p9:
+		vdda_mipi_csi1_0p9:
+		vdda_mipi_csi2_0p9:
+		vdda_mipi_dsi0_pll:
+		vdda_mipi_dsi1_pll:
+		vdda_qlink_lv:
+		vdda_qlink_lv_ck:
+		vdda_qrefs_0p875:
+		vdda_pcie_core:
+		vdda_pll_cc_ebi01:
+		vdda_pll_cc_ebi23:
+		vdda_sp_sensor:
+		vdda_ufs1_core:
+		vdda_ufs2_core:
+		vdda_usb1_ss_core:
+		vdda_usb2_ss_core:
+		vreg_l1a_0p875: ldo1 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_10:
+		vreg_l2a_1p2: ldo2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l3a_1p0: ldo3 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_wcss_cx:
+		vdd_wcss_mx:
+		vdda_wcss_pll:
+		vreg_l5a_0p8: ldo5 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_13:
+		vreg_l6a_1p8: ldo6 {
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <1856000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a_1p8: ldo7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8a_1p2: ldo8 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1248000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a_1p8: ldo9 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10a_1p8: ldo10 {
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <2928000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11a_1p0: ldo11 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1048000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdd_qfprom:
+		vdd_qfprom_sp:
+		vdda_apc1_cs_1p8:
+		vdda_gfx_cs_1p8:
+		vdda_qrefs_1p8:
+		vdda_qusb_hs0_1p8:
+		vddpx_11:
+		vreg_l12a_1p8: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_2:
+		vreg_l13a_2p95: ldo13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14a_1p88: ldo14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15a_1p8: ldo15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16a_2p7: ldo16 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2704000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17a_1p3: ldo17 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18a_2p7: ldo18 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l19a_3p0: ldo19 {
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l20a_2p95: ldo20 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l21a_2p95: ldo21 {
+			regulator-min-microvolt = <2704000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l22a_2p85: ldo22 {
+			regulator-min-microvolt = <2864000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l23a_3p3: ldo23 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_qusb_hs0_3p1:
+		vreg_l24a_3p075: ldo24 {
+			regulator-min-microvolt = <3088000>;
+			regulator-max-microvolt = <3088000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l25a_3p3: ldo25 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_hp_pcie_1p2:
+		vdda_hv_ebi0:
+		vdda_hv_ebi1:
+		vdda_hv_ebi2:
+		vdda_hv_ebi3:
+		vdda_mipi_csi_1p25:
+		vdda_mipi_dsi0_1p2:
+		vdda_mipi_dsi1_1p2:
+		vdda_pcie_1p2:
+		vdda_ufs1_1p2:
+		vdda_ufs2_1p2:
+		vdda_usb1_ss_1p2:
+		vdda_usb2_ss_1p2:
+		vreg_l26a_1p2: ldo26 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l28a_3p0: ldo28 {
+			regulator-min-microvolt = <2856000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_lvs1a_1p8: lvs1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_lvs2a_1p8: lvs2 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+	};
+
+	pmi8998-rpmh-regulators {
+		compatible = "qcom,pmi8998-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3312000>;
+			regulator-max-microvolt = <3600000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+			regulator-allow-bypass;
+		};
+	};
+
+	pm8005-rpmh-regulators {
+		compatible = "qcom,pm8005-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s3c_0p6: smps3 {
+			regulator-min-microvolt = <600000>;
+			regulator-max-microvolt = <600000>;
+		};
+	};
+};
+
+&cdsp_pas {
+	status = "okay";
+	firmware-name = "qcom/sdm845/axolotl/cdsp.mbn";
+};
+
+&dsi0 {
+	status = "okay";
+	vdda-supply = <&vdda_mipi_dsi0_1p2>;
+
+	panel@0 {
+		compatible = "visionox,rm69299-shift";
+		status = "okay";
+		reg = <0>;
+		vdda-supply = <&vreg_l14a_1p88>;
+		vdd3p3-supply = <&vreg_l28a_3p0>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&sde_dsi_active &sde_te_active>;
+		pinctrl-1 = <&sde_dsi_suspend &sde_te_suspend>;
+
+		port {
+			panel_in_0: endpoint {
+				remote-endpoint = <&dsi0_out>;
+			};
+		};
+	};
+};
+
+&dsi0_out {
+	remote-endpoint = <&panel_in_0>;
+	data-lanes = <0 1 2 3>;
+};
+
+&dsi0_phy {
+	status = "okay";
+	vdds-supply = <&vdda_mipi_dsi0_pll>;
+};
+
+&gcc {
+	protected-clocks = <GCC_QSPI_CORE_CLK>,
+			   <GCC_QSPI_CORE_CLK_SRC>,
+			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+			   <GCC_LPASS_Q6_AXI_CLK>,
+			   <GCC_LPASS_SWAY_CLK>;
+};
+
+&gmu {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+
+	zap-shader {
+		memory-region = <&gpu_mem>;
+		firmware-name = "qcom/sdm845/axolotl/a630_zap.mbn";
+	};
+};
+
+&i2c5 {
+	status="okay";
+
+	touchscreen@38 {
+		compatible = "focaltech,fts8719";
+		reg = <0x38>;
+		wakeup-source;
+		interrupt-parent = <&tlmm>;
+		interrupts = <125 0x2>;
+		vdd-supply = <&vreg_l28a_3p0>;
+		vcc-i2c-supply = <&vreg_l14a_1p88>;
+
+		pinctrl-names = "default", "suspend";
+		pinctrl-0 = <&ts_int_active &ts_reset_active>;
+		pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>;
+
+		reset-gpio = <&tlmm 99 GPIO_ACTIVE_HIGH>;
+		irq-gpio = <&tlmm 125 GPIO_TRANSITORY>;
+		touchscreen-size-x = <1080>;
+		touchscreen-size-y = <2160>;
+		focaltech,max-touch-number = <5>;
+	};
+};
+
+&ipa {
+	status = "okay";
+
+	memory-region = <&ipa_fw_mem>;
+	firmware-name = "qcom/sdm845/axolotl/ipa_fws.mbn";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mss_pil {
+	status = "okay";
+	firmware-name = "qcom/sdm845/axolotl/mba.mbn", "qcom/sdm845/axolotl/modem.mbn";
+};
+
+&pm8998_gpio {
+	volume_up_gpio: pm8998_gpio6 {
+		pinconf {
+			pins = "gpio6";
+			function = "normal";
+			input-enable;
+			bias-pull-up;
+			qcom,drive-strength = <0>;
+		};
+	};
+};
+
+&pm8998_pon {
+	volume_down_resin: resin {
+		compatible = "qcom,pm8941-resin";
+		interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+		debounce = <15625>;
+		bias-pull-up;
+		linux,code = <KEY_VOLUMEDOWN>;
+	};
+};
+
+&qup_uart9_default {
+	pinconf-rx {
+		pins = "gpio5";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	pinconf-tx {
+		pins = "gpio4";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <81 4>;
+
+	sde_dsi_active: sde-dsi-active {
+		mux {
+			pins = "gpio6", "gpio11";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio6", "gpio11";
+			drive-strength = <8>;
+			bias-disable = <0>;
+		};
+	};
+
+	sde_dsi_suspend: sde-dsi-suspend {
+		mux {
+			pins = "gpio6", "gpio11";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio6", "gpio11";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+
+	sde_te_active: sde-te-active {
+		mux {
+			pins = "gpio10";
+			function = "mdp_vsync";
+		};
+
+		config {
+			pins = "gpio10";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+
+	sde_te_suspend: sde-te-suspend {
+		mux {
+			pins = "gpio10";
+			function = "mdp_vsync";
+		};
+
+		config {
+			pins = "gpio10";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+
+	ts_int_active: ts-int-active {
+		mux {
+			pins = "gpio125";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio125";
+			drive-strength = <8>;
+			bias-pull-up;
+			input-enable;
+		};
+	};
+
+	ts_int_suspend: ts-int-suspend {
+		mux {
+			pins = "gpio125";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio125";
+			drive-strength = <2>;
+			bias-pull-down;
+			input-enable;
+		};
+	};
+
+	ts_reset_active: ts-reset-active {
+		mux {
+			pins = "gpio99";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio99";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	ts_reset_suspend: ts-reset-suspend {
+		mux {
+			pins = "gpio99";
+			function = "gpio";
+		};
+
+		config {
+			pins = "gpio99";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+	};
+};
+
+&uart6 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn3990-bt";
+
+		vddio-supply = <&vreg_s4a_1p8>;
+		vddxo-supply = <&vreg_l7a_1p8>;
+		vddrf-supply = <&vreg_l17a_1p3>;
+		vddch0-supply = <&vreg_l25a_3p3>;
+		max-speed = <3200000>;
+	};
+};
+
+&uart9 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	status = "okay";
+
+	reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l20a_2p95>;
+	vcc-max-microamp = <600000>;
+};
+
+&ufs_mem_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vdda_ufs1_core>;
+	vdda-pll-supply = <&vdda_ufs1_1p2>;
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+
+	vdd-supply = <&vreg_l1a_0p875>;
+	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l26a_1p2>;
+	vdda-pll-supply = <&vreg_l1a_0p875>;
+};
+
+&venus {
+	status = "okay";
+	firmware-name = "qcom/sdm845/axolotl/venus.mbn";
+};
+
+&wifi {
+	status = "okay";
+
+	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+	vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;
+
+	qcom,snoc-host-cap-8bit-quirk;
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index cfdeaa81f1bb..41f4e46e1f85 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -12,6 +12,7 @@
 #include <dt-bindings/clock/qcom,lpass-sdm845.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/clock/qcom,videocc-sdm845.h>
+#include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sdm845.h>
@@ -79,22 +80,22 @@
 		#size-cells = <2>;
 		ranges;
 
-		hyp_mem: memory@85700000 {
+		hyp_mem: hyp-mem@85700000 {
 			reg = <0 0x85700000 0 0x600000>;
 			no-map;
 		};
 
-		xbl_mem: memory@85e00000 {
+		xbl_mem: xbl-mem@85e00000 {
 			reg = <0 0x85e00000 0 0x100000>;
 			no-map;
 		};
 
-		aop_mem: memory@85fc0000 {
+		aop_mem: aop-mem@85fc0000 {
 			reg = <0 0x85fc0000 0 0x20000>;
 			no-map;
 		};
 
-		aop_cmd_db_mem: memory@85fe0000 {
+		aop_cmd_db_mem: aop-cmd-db-mem@85fe0000 {
 			compatible = "qcom,cmd-db";
 			reg = <0x0 0x85fe0000 0 0x20000>;
 			no-map;
@@ -107,12 +108,12 @@
 			hwlocks = <&tcsr_mutex 3>;
 		};
 
-		tz_mem: memory@86200000 {
+		tz_mem: tz@86200000 {
 			reg = <0 0x86200000 0 0x2d00000>;
 			no-map;
 		};
 
-		rmtfs_mem: memory@88f00000 {
+		rmtfs_mem: rmtfs@88f00000 {
 			compatible = "qcom,rmtfs-mem";
 			reg = <0 0x88f00000 0 0x200000>;
 			no-map;
@@ -121,67 +122,67 @@
 			qcom,vmid = <15>;
 		};
 
-		qseecom_mem: memory@8ab00000 {
+		qseecom_mem: qseecom@8ab00000 {
 			reg = <0 0x8ab00000 0 0x1400000>;
 			no-map;
 		};
 
-		camera_mem: memory@8bf00000 {
+		camera_mem: camera-mem@8bf00000 {
 			reg = <0 0x8bf00000 0 0x500000>;
 			no-map;
 		};
 
-		ipa_fw_mem: memory@8c400000 {
+		ipa_fw_mem: ipa-fw@8c400000 {
 			reg = <0 0x8c400000 0 0x10000>;
 			no-map;
 		};
 
-		ipa_gsi_mem: memory@8c410000 {
+		ipa_gsi_mem: ipa-gsi@8c410000 {
 			reg = <0 0x8c410000 0 0x5000>;
 			no-map;
 		};
 
-		gpu_mem: memory@8c415000 {
+		gpu_mem: gpu@8c415000 {
 			reg = <0 0x8c415000 0 0x2000>;
 			no-map;
 		};
 
-		adsp_mem: memory@8c500000 {
+		adsp_mem: adsp@8c500000 {
 			reg = <0 0x8c500000 0 0x1a00000>;
 			no-map;
 		};
 
-		wlan_msa_mem: memory@8df00000 {
+		wlan_msa_mem: wlan-msa@8df00000 {
 			reg = <0 0x8df00000 0 0x100000>;
 			no-map;
 		};
 
-		mpss_region: memory@8e000000 {
+		mpss_region: mpss@8e000000 {
 			reg = <0 0x8e000000 0 0x7800000>;
 			no-map;
 		};
 
-		venus_mem: memory@95800000 {
+		venus_mem: venus@95800000 {
 			reg = <0 0x95800000 0 0x500000>;
 			no-map;
 		};
 
-		cdsp_mem: memory@95d00000 {
+		cdsp_mem: cdsp@95d00000 {
 			reg = <0 0x95d00000 0 0x800000>;
 			no-map;
 		};
 
-		mba_region: memory@96500000 {
+		mba_region: mba@96500000 {
 			reg = <0 0x96500000 0 0x200000>;
 			no-map;
 		};
 
-		slpi_mem: memory@96700000 {
+		slpi_mem: slpi@96700000 {
 			reg = <0 0x96700000 0 0x1400000>;
 			no-map;
 		};
 
-		spss_mem: memory@97b00000 {
+		spss_mem: spss@97b00000 {
 			reg = <0 0x97b00000 0 0x100000>;
 			no-map;
 		};
@@ -787,7 +788,7 @@
 			apr {
 				compatible = "qcom,apr-v2";
 				qcom,glink-channels = "apr_audio_svc";
-				qcom,apr-domain = <APR_DOMAIN_ADSP>;
+				qcom,domain = <APR_DOMAIN_ADSP>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				qcom,intents = <512 20>;
@@ -1125,6 +1126,29 @@
 			};
 		};
 
+		gpi_dma0: dma-controller@800000 {
+			#dma-cells = <3>;
+			compatible = "qcom,sdm845-gpi-dma";
+			reg = <0 0x00800000 0 0x60000>;
+			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <13>;
+			dma-channel-mask = <0xfa>;
+			iommus = <&apps_smmu 0x0016 0x0>;
+			status = "disabled";
+		};
+
 		qupv3_id_0: geniqup@8c0000 {
 			compatible = "qcom,geni-se-qup";
 			reg = <0 0x008c0000 0 0x6000>;
@@ -1171,6 +1195,9 @@
 				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
 						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
 				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -1544,6 +1571,29 @@
 			};
 		};
 
+		gpi_dma1: dma-controller@0xa00000 {
+			#dma-cells = <3>;
+			compatible = "qcom,sdm845-gpi-dma";
+			reg = <0 0x00a00000 0 0x60000>;
+			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
+			dma-channels = <13>;
+			dma-channel-mask = <0xfa>;
+			iommus = <&apps_smmu 0x06d6 0x0>;
+			status = "disabled";
+		};
+
 		qupv3_id_1: geniqup@ac0000 {
 			compatible = "qcom,geni-se-qup";
 			reg = <0 0x00ac0000 0 0x6000>;
@@ -1967,7 +2017,7 @@
 			};
 		};
 
-		system-cache-controller@1100000 {
+		llcc: system-cache-controller@1100000 {
 			compatible = "qcom,sdm845-llcc";
 			reg = <0 0x01100000 0 0x200000>, <0 0x01300000 0 0x50000>;
 			reg-names = "llcc_base", "llcc_broadcast_base";
@@ -2587,6 +2637,13 @@
 					       "gpio2", "gpio3";
 					function = "qup0";
 				};
+
+				config {
+					pins = "gpio0", "gpio1",
+					       "gpio2", "gpio3";
+					drive-strength = <6>;
+					bias-disable;
+				};
 			};
 
 			qup_spi1_default: qup-spi1-default {
@@ -3613,10 +3670,10 @@
 					#clock-cells = <0>;
 					clock-frequency = <9600000>;
 					clock-output-names = "mclk";
-					qcom,micbias1-millivolt = <1800>;
-					qcom,micbias2-millivolt = <1800>;
-					qcom,micbias3-millivolt = <1800>;
-					qcom,micbias4-millivolt = <1800>;
+					qcom,micbias1-microvolt = <1800000>;
+					qcom,micbias2-microvolt = <1800000>;
+					qcom,micbias3-microvolt = <1800000>;
+					qcom,micbias4-microvolt = <1800000>;
 
 					#address-cells = <1>;
 					#size-cells = <1>;
@@ -4139,6 +4196,8 @@
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "bi_tcxo";
 		};
 
 		dsi_opp_table: dsi-opp-table {
@@ -4619,7 +4678,7 @@
 		};
 
 		aoss_qmp: power-controller@c300000 {
-			compatible = "qcom,sdm845-aoss-qmp";
+			compatible = "qcom,sdm845-aoss-qmp", "qcom,aoss-qmp";
 			reg = <0 0x0c300000 0 0x100000>;
 			interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
 			mboxes = <&apss_shared 0>;
@@ -5258,7 +5317,7 @@
 			};
 		};
 
-		gpu-thermal-top {
+		gpu-top-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
@@ -5273,7 +5332,7 @@
 			};
 		};
 
-		gpu-thermal-bottom {
+		gpu-bottom-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
index 58845a14805f..f1619b3f97ef 100644
--- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
+++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
@@ -56,19 +56,6 @@
 		};
 	};
 
-	panel {
-		compatible = "boe,nv133fhm-n61";
-		no-hpd;
-
-		ports {
-			port {
-				panel_in_edp: endpoint {
-					remote-endpoint = <&sn65dsi86_out>;
-				};
-			};
-		};
-	};
-
 	/* Reserved memory changes for IPA */
 	reserved-memory {
 		wlan_msa_mem: memory@8c400000 {
@@ -98,6 +85,12 @@
 
 		clock-frequency = <19200000>;
 	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&sn65dsi86 1000000>;
+		enable-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
+	};
 };
 
 &adsp_pas {
@@ -419,6 +412,7 @@
 		clock-names = "refclk";
 
 		no-hpd;
+		#pwm-cells = <1>;
 
 		ports {
 			#address-cells = <1>;
@@ -438,6 +432,19 @@
 				};
 			};
 		};
+
+		aux-bus {
+			panel: panel {
+				compatible = "boe,nv133fhm-n61";
+				backlight = <&backlight>;
+
+				port {
+					panel_in_edp: endpoint {
+						remote-endpoint = <&sn65dsi86_out>;
+					};
+				};
+			};
+		};
 	};
 };
 
@@ -807,3 +814,8 @@
 
 	qcom,snoc-host-cap-8bit-quirk;
 };
+
+&crypto {
+	/* FIXME: qce_start triggers an SError */
+	status= "disable";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts
new file mode 100644
index 000000000000..2a552d817b03
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm850-samsung-w737.dts
@@ -0,0 +1,748 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Samsung Galaxy Book2
+ *
+ * Copyright (c) 2022, Xilin Wu <strongtz@yeah.net>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+#include "sdm850.dtsi"
+#include "pm8998.dtsi"
+
+/*
+ * Update following upstream (sdm845.dtsi) reserved
+ * memory mappings for firmware loading to succeed
+ */
+/delete-node/ &qseecom_mem;
+/delete-node/ &wlan_msa_mem;
+/delete-node/ &slpi_mem;
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &ipa_gsi_mem;
+/delete-node/ &gpu_mem;
+/delete-node/ &mpss_region;
+/delete-node/ &adsp_mem;
+/delete-node/ &cdsp_mem;
+/delete-node/ &venus_mem;
+/delete-node/ &mba_region;
+/delete-node/ &spss_mem;
+
+/ {
+	model = "Samsung Galaxy Book2";
+	compatible = "samsung,w737", "qcom,sdm845";
+	chassis-type = "convertible";
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		// Firmware initialized the display at 1280p instead of 1440p
+		framebuffer0: framebuffer@80400000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x80400000 0 (1920 * 1280 * 4)>;
+			width = <1920>;
+			height = <1280>;
+			stride = <(1920 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	aliases {
+		hsuart0 = &uart6;
+	};
+
+	/* Reserved memory changes */
+	reserved-memory {
+		/* Bootloader display framebuffer region */
+		cont_splash_mem: memory@80400000 {
+			reg = <0x0 0x80400000 0x0 0x960000>;
+			no-map;
+		};
+
+		qseecom_mem: memory@8b500000 {
+			reg = <0 0x8b500000 0 0xa00000>;
+			no-map;
+		};
+
+		wlan_msa_mem: memory@8c400000 {
+			reg = <0 0x8c400000 0 0x100000>;
+			no-map;
+		};
+
+		slpi_mem: memory@8c500000 {
+			reg = <0 0x8c500000 0 0x1200000>;
+			no-map;
+		};
+
+		ipa_fw_mem: memory@8d700000 {
+			reg = <0 0x8d700000 0 0x100000>;
+			no-map;
+		};
+
+		gpu_mem: memory@8d800000 {
+			reg = <0 0x8d800000 0 0x5000>;
+			no-map;
+		};
+
+		mpss_region: memory@8e000000 {
+			reg = <0 0x8e000000 0 0x8000000>;
+			no-map;
+		};
+
+		adsp_mem: memory@96000000 {
+			reg = <0 0x96000000 0 0x2000000>;
+			no-map;
+		};
+
+		cdsp_mem: memory@98000000 {
+			reg = <0 0x98000000 0 0x800000>;
+			no-map;
+		};
+
+		venus_mem: memory@98800000 {
+			reg = <0 0x98800000 0 0x500000>;
+			no-map;
+		};
+
+		mba_region: memory@98d00000 {
+			reg = <0 0x98d00000 0 0x200000>;
+			no-map;
+		};
+
+		spss_mem: memory@98f00000 {
+			reg = <0 0x98f00000 0 0x100000>;
+			no-map;
+		};
+	};
+};
+
+&adsp_pas {
+	firmware-name = "qcom/samsung/w737/qcadsp850.mbn";
+	status = "okay";
+};
+
+&apps_rsc {
+	pm8998-rpmh-regulators {
+		compatible = "qcom,pm8998-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
+		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
+
+		vreg_s2a_1p125: smps2 {
+		};
+
+		vreg_s3a_1p35: smps3 {
+			regulator-min-microvolt = <1352000>;
+			regulator-max-microvolt = <1352000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s4a_1p8: smps4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5a_2p04: smps5 {
+			regulator-min-microvolt = <2040000>;
+			regulator-max-microvolt = <2040000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s7a_1p025: smps7 {
+		};
+
+		vdd_qusb_hs0:
+		vdda_hp_pcie_core:
+		vdda_mipi_csi0_0p9:
+		vdda_mipi_csi1_0p9:
+		vdda_mipi_csi2_0p9:
+		vdda_mipi_dsi0_pll:
+		vdda_mipi_dsi1_pll:
+		vdda_qlink_lv:
+		vdda_qlink_lv_ck:
+		vdda_qrefs_0p875:
+		vdda_pcie_core:
+		vdda_pll_cc_ebi01:
+		vdda_pll_cc_ebi23:
+		vdda_sp_sensor:
+		vdda_ufs1_core:
+		vdda_ufs2_core:
+		vdda_usb1_ss_core:
+		vdda_usb2_ss_core:
+		vreg_l1a_0p875: ldo1 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_10:
+		vreg_l2a_1p2: ldo2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l3a_1p0: ldo3 {
+		};
+
+		vdd_wcss_cx:
+		vdd_wcss_mx:
+		vdda_wcss_pll:
+		vreg_l5a_0p8: ldo5 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_13:
+		vreg_l6a_1p8: ldo6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a_1p8: ldo7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8a_1p2: ldo8 {
+		};
+
+		vreg_l9a_1p8: ldo9 {
+		};
+
+		vreg_l10a_1p8: ldo10 {
+		};
+
+		vreg_l11a_1p0: ldo11 {
+		};
+
+		vdd_qfprom:
+		vdd_qfprom_sp:
+		vdda_apc1_cs_1p8:
+		vdda_gfx_cs_1p8:
+		vdda_qrefs_1p8:
+		vdda_qusb_hs0_1p8:
+		vddpx_11:
+		vreg_l12a_1p8: ldo12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vddpx_2:
+		vreg_l13a_2p95: ldo13 {
+		};
+
+		vreg_l14a_1p88: ldo14 {
+			regulator-min-microvolt = <1880000>;
+			regulator-max-microvolt = <1880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l15a_1p8: ldo15 {
+		};
+
+		vreg_l16a_2p7: ldo16 {
+		};
+
+		vreg_l17a_1p3: ldo17 {
+			regulator-min-microvolt = <1304000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18a_1p8: ldo18 {
+		};
+
+		vreg_l19a_3p0: ldo19 {
+			regulator-min-microvolt = <3100000>;
+			regulator-max-microvolt = <3108000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l20a_2p95: ldo20 {
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l21a_2p95: ldo21 {
+		};
+
+		vreg_l22a_2p85: ldo22 {
+		};
+
+		vreg_l23a_3p3: ldo23 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3312000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_qusb_hs0_3p1:
+		vreg_l24a_3p075: ldo24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3083000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l25a_3p3: ldo25 {
+			regulator-min-microvolt = <3104000>;
+			regulator-max-microvolt = <3112000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vdda_hp_pcie_1p2:
+		vdda_hv_ebi0:
+		vdda_hv_ebi1:
+		vdda_hv_ebi2:
+		vdda_hv_ebi3:
+		vdda_mipi_csi_1p25:
+		vdda_mipi_dsi0_1p2:
+		vdda_mipi_dsi1_1p2:
+		vdda_pcie_1p2:
+		vdda_ufs1_1p2:
+		vdda_ufs2_1p2:
+		vdda_usb1_ss_1p2:
+		vdda_usb2_ss_1p2:
+		vreg_l26a_1p2: ldo26 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1208000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l28a_3p0: ldo28 {
+		};
+
+		vreg_lvs1a_1p8: lvs1 {
+		};
+
+		vreg_lvs2a_1p8: lvs2 {
+		};
+	};
+};
+
+&cdsp_pas {
+	firmware-name = "qcom/samsung/w737/qccdsp850.mbn";
+	status = "okay";
+};
+
+&gcc {
+	protected-clocks = <GCC_QSPI_CORE_CLK>,
+			   <GCC_QSPI_CORE_CLK_SRC>,
+			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+			   <GCC_LPASS_Q6_AXI_CLK>,
+			   <GCC_LPASS_SWAY_CLK>;
+};
+
+&i2c10 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	/* SN65DSI86 @ 0x2c */
+	/* The panel requires dual DSI, which is not supported by the bridge driver */
+};
+
+&i2c11 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	/* HID-I2C Touchscreen @ 0x20 */
+};
+
+&i2c15 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	digitizer@9 {
+		compatible = "wacom,w9013", "hid-over-i2c";
+		reg = <0x9>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pen_irq_l>, <&pen_pdct_l>, <&pen_rst_l>;
+
+		post-power-on-delay-ms = <120>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <119 IRQ_TYPE_LEVEL_LOW>;
+
+		hid-descr-addr = <0x1>;
+	};
+};
+
+&ipa {
+	status = "okay";
+	memory-region = <&ipa_fw_mem>;
+	firmware-name = "qcom/samsung/w737/ipa_fws.elf";
+};
+
+/* No idea why it causes an SError when enabled */
+&llcc {
+	status = "disabled";
+};
+
+&mss_pil {
+	status = "okay";
+	firmware-name = "qcom/samsung/w737/qcdsp1v2850.mbn", "qcom/samsung/w737/qcdsp2850.mbn";
+};
+
+&qup_i2c10_default {
+	pinconf {
+		pins = "gpio55", "gpio56";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&qup_i2c11_default {
+	pinconf {
+		pins = "gpio31", "gpio32";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&qup_i2c12_default {
+	drive-strength = <2>;
+	bias-disable;
+};
+
+&qup_uart6_default {
+	pinmux {
+		 pins = "gpio45", "gpio46", "gpio47", "gpio48";
+		 function = "qup6";
+	};
+
+	cts {
+		pins = "gpio45";
+		bias-pull-down;
+	};
+
+	rts-tx {
+		pins = "gpio46", "gpio47";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	rx {
+		pins = "gpio48";
+		bias-pull-up;
+	};
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&q6asmdai {
+	dai@0 {
+		reg = <0>;
+	};
+
+	dai@1 {
+		reg = <1>;
+	};
+
+	dai@2 {
+		reg = <2>;
+	};
+};
+
+&sound {
+	compatible = "qcom,sdm845-sndcard";
+	model = "Samsung-W737";
+
+	audio-routing =
+		"RX_BIAS", "MCLK",
+		"AMIC2", "MIC BIAS2",
+		"SpkrLeft IN", "SPK1 OUT",
+		"SpkrRight IN", "SPK2 OUT",
+		"MM_DL1",  "MultiMedia1 Playback",
+		"MM_DL3",  "MultiMedia3 Playback",
+		"MultiMedia2 Capture", "MM_UL2";
+
+	mm1-dai-link {
+		link-name = "MultiMedia1";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	mm2-dai-link {
+		link-name = "MultiMedia2";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA2>;
+		};
+	};
+
+	mm3-dai-link {
+		link-name = "MultiMedia3";
+		cpu {
+			sound-dai = <&q6asmdai  MSM_FRONTEND_DAI_MULTIMEDIA3>;
+		};
+	};
+
+	slim-dai-link {
+		link-name = "SLIM Playback";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai =  <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 0>;
+		};
+	};
+
+	slimcap-dai-link {
+		link-name = "SLIM Capture";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_0_TX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&wcd9340 1>;
+		};
+	};
+
+	slim-wcd-dai-link {
+		link-name = "SLIM WCD Playback";
+		cpu {
+			sound-dai = <&q6afedai SLIMBUS_1_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai =  <&wcd9340 2>;
+		};
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 6>, <85 4>;
+
+	pen_irq_l: pen-irq-l {
+		pinmux {
+			pins = "gpio119";
+			function = "gpio";
+		};
+
+		pinconf {
+			pins = "gpio119";
+			bias-disable;
+		};
+	};
+
+	pen_pdct_l: pen-pdct-l {
+		pinmux {
+			pins = "gpio124";
+			function = "gpio";
+		};
+
+		pinconf {
+			pins = "gpio124";
+			bias-disable;
+			drive-strength = <2>;
+			output-high;
+		};
+	};
+
+	pen_rst_l: pen-rst-l {
+		pinmux  {
+			pins = "gpio21";
+			function = "gpio";
+		};
+
+		pinconf {
+			pins = "gpio21";
+			bias-disable;
+			drive-strength = <2>;
+
+			/*
+			 * The pen driver doesn't currently support
+			 * driving this reset line.  By specifying
+			 * output-high here we're relying on the fact
+			 * that this pin has a default pulldown at boot
+			 * (which makes sure the pen was in reset if it
+			 * was powered) and then we set it high here to
+			 * take it out of reset.  Better would be if the
+			 * pen driver could control this and we could
+			 * remove "output-high" here.
+			 */
+			output-high;
+		};
+	};
+
+	wcd_intr_default: wcd_intr_default {
+		pins = "gpio54";
+		function = "gpio";
+
+		input-enable;
+		bias-pull-down;
+		drive-strength = <2>;
+	};
+};
+
+&uart6 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn3990-bt";
+
+		vddio-supply = <&vreg_s4a_1p8>;
+		vddxo-supply = <&vreg_l7a_1p8>;
+		vddrf-supply = <&vreg_l17a_1p3>;
+		vddch0-supply = <&vreg_l25a_3p3>;
+		vddch1-supply = <&vreg_l23a_3p3>;
+		max-speed = <3200000>;
+	};
+};
+
+&ufs_mem_hc {
+	status = "okay";
+
+	reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l20a_2p95>;
+	vcc-max-microamp = <600000>;
+};
+
+&ufs_mem_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vdda_ufs1_core>;
+	vdda-pll-supply = <&vdda_ufs1_1p2>;
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+
+	vdd-supply = <&vdda_usb1_ss_core>;
+	vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
+	vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
+
+	qcom,imp-res-offset-value = <8>;
+	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
+	qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
+	qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vdda_usb1_ss_1p2>;
+	vdda-pll-supply = <&vdda_usb1_ss_core>;
+};
+
+&usb_2 {
+	status = "okay";
+};
+
+&usb_2_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_2_hsphy {
+	status = "okay";
+
+	vdd-supply = <&vdda_usb2_ss_core>;
+	vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
+	vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
+
+	qcom,imp-res-offset-value = <8>;
+	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>;
+};
+
+&usb_2_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vdda_usb2_ss_1p2>;
+	vdda-pll-supply = <&vdda_usb2_ss_core>;
+};
+
+&venus {
+	status = "okay";
+	firmware-name = "qcom/samsung/w737/qcvss850.mbn";
+};
+
+&wcd9340{
+	pinctrl-0 = <&wcd_intr_default>;
+	pinctrl-names = "default";
+	clock-names = "extclk";
+	clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
+	reset-gpios = <&tlmm 64 0>;
+	vdd-buck-supply = <&vreg_s4a_1p8>;
+	vdd-buck-sido-supply = <&vreg_s4a_1p8>;
+	vdd-tx-supply = <&vreg_s4a_1p8>;
+	vdd-rx-supply = <&vreg_s4a_1p8>;
+	vdd-io-supply = <&vreg_s4a_1p8>;
+	qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+	qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+	qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+
+	swm: swm@c85 {
+		left_spkr: wsa8810-left{
+			compatible = "sdw10217211000";
+			reg = <0 3>;
+			powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>;
+			#thermal-sensor-cells = <0>;
+			sound-name-prefix = "SpkrLeft";
+			#sound-dai-cells = <0>;
+		};
+
+		right_spkr: wsa8810-right{
+			compatible = "sdw10217211000";
+			powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>;
+			reg = <0 4>;
+			#thermal-sensor-cells = <0>;
+			sound-name-prefix = "SpkrRight";
+			#sound-dai-cells = <0>;
+		};
+	};
+};
+
+&wifi {
+	status = "okay";
+
+	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
+	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
+	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
+	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+	vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;
+
+	qcom,snoc-host-cap-8bit-quirk;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
index 49e6bca646c2..e81b2a7794fb 100644
--- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
@@ -449,7 +449,7 @@
 				 <&xo_board>;
 			clock-names = "iface", "core", "xo";
 
-			power-domains = <&rpmpd 0>;
+			power-domains = <&rpmpd SM6125_VDDCX>;
 
 			bus-width = <8>;
 			non-removable;
@@ -474,7 +474,7 @@
 			pinctrl-1 = <&sdc2_state_off>;
 			pinctrl-names = "default", "sleep";
 
-			power-domains = <&rpmpd 0>;
+			power-domains = <&rpmpd SM6125_VDDCX>;
 
 			bus-width = <4>;
 			status = "disabled";
diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
index d4af9e0dad87..adb6ca2be2a5 100644
--- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
+++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
@@ -10,6 +10,7 @@
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include "sm7225.dtsi"
+#include "pm6150l.dtsi"
 #include "pm6350.dtsi"
 
 / {
@@ -300,6 +301,14 @@
 	firmware-name = "qcom/sm7225/fairphone4/modem.mdt";
 };
 
+&pm6150l_wled {
+	status = "okay";
+
+	qcom,switching-freq = <800>;
+	qcom,current-limit-microamp = <20000>;
+	qcom,num-strings = <2>;
+};
+
 &pm6350_gpios {
 	gpio_keys_pin: gpio-keys-pin {
 		pins = "gpio2";
diff --git a/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts b/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts
index 5901c28e6696..a73317e1a824 100644
--- a/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts
+++ b/arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts
@@ -430,18 +430,8 @@
 	/* MAX34417 @ 0x1e */
 };
 
-&pon {
-	pwrkey {
-		status = "okay";
-	};
-
-	resin {
-		compatible = "qcom,pm8941-resin";
-		interrupts = <0x0 0x8 0x1 IRQ_TYPE_EDGE_BOTH>;
-		debounce = <15625>;
-		bias-pull-up;
-		linux,code = <KEY_VOLUMEDOWN>;
-	};
+&pon_pwrkey {
+	status = "okay";
 };
 
 &qupv3_id_0 {
@@ -476,6 +466,12 @@
 	firmware-name = "qcom/sm8150/microsoft/slpi.mdt";
 };
 
+&pon_resin {
+	status = "okay";
+
+	linux,code = <KEY_VOLUMEDOWN>;
+};
+
 &tlmm {
 	gpio-reserved-ranges = <126 4>;
 
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 6012322a5984..d15fee495238 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -932,6 +932,9 @@
 				reg = <0 0x00880000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c0_default>;
 				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
@@ -946,6 +949,9 @@
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi0_default>;
 				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
@@ -960,6 +966,9 @@
 				reg = <0 0x00884000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c1_default>;
 				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
@@ -974,6 +983,9 @@
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi1_default>;
 				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
@@ -988,6 +1000,9 @@
 				reg = <0 0x00888000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c2_default>;
 				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
@@ -1002,6 +1017,9 @@
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi2_default>;
 				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
@@ -1016,6 +1034,9 @@
 				reg = <0 0x0088c000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c3_default>;
 				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
@@ -1030,6 +1051,9 @@
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi3_default>;
 				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
@@ -1044,6 +1068,9 @@
 				reg = <0 0x00890000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c4_default>;
 				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
@@ -1058,6 +1085,9 @@
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi4_default>;
 				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
@@ -1072,6 +1102,9 @@
 				reg = <0 0x00894000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c5_default>;
 				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
@@ -1086,6 +1119,9 @@
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi5_default>;
 				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
@@ -1100,6 +1136,9 @@
 				reg = <0 0x00898000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c6_default>;
 				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
@@ -1114,6 +1153,9 @@
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi6_default>;
 				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
@@ -1128,6 +1170,9 @@
 				reg = <0 0x0089c000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c7_default>;
 				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
@@ -1142,6 +1187,9 @@
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi7_default>;
 				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
@@ -1192,6 +1240,9 @@
 				reg = <0 0x00a80000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c8_default>;
 				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
@@ -1206,6 +1257,9 @@
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi8_default>;
 				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
@@ -1220,6 +1274,9 @@
 				reg = <0 0x00a84000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c9_default>;
 				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
@@ -1234,6 +1291,9 @@
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi9_default>;
 				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
@@ -1248,6 +1308,9 @@
 				reg = <0 0x00a88000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c10_default>;
 				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
@@ -1262,6 +1325,9 @@
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi10_default>;
 				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
@@ -1276,6 +1342,9 @@
 				reg = <0 0x00a8c000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c11_default>;
 				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
@@ -1290,6 +1359,9 @@
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi11_default>;
 				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
@@ -1313,6 +1385,9 @@
 				reg = <0 0x00a90000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c12_default>;
 				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
@@ -1327,6 +1402,9 @@
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi12_default>;
 				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
@@ -1341,6 +1419,9 @@
 				reg = <0 0x0094000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c16_default>;
 				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
@@ -1355,6 +1436,9 @@
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi16_default>;
 				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
@@ -1406,6 +1490,9 @@
 				reg = <0 0x00c80000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c17_default>;
 				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
@@ -1420,6 +1507,9 @@
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi17_default>;
 				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
@@ -1434,6 +1524,9 @@
 				reg = <0 0x00c84000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c18_default>;
 				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
@@ -1448,6 +1541,9 @@
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi18_default>;
 				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
@@ -1462,6 +1558,9 @@
 				reg = <0 0x00c88000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c19_default>;
 				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
@@ -1476,6 +1575,9 @@
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi19_default>;
 				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
@@ -1490,6 +1592,9 @@
 				reg = <0 0x00c8c000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c13_default>;
 				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
@@ -1504,6 +1609,9 @@
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi13_default>;
 				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
@@ -1518,6 +1626,9 @@
 				reg = <0 0x00c90000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c14_default>;
 				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
@@ -1532,6 +1643,9 @@
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi14_default>;
 				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
@@ -1546,6 +1660,9 @@
 				reg = <0 0x00c94000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c15_default>;
 				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
@@ -1560,6 +1677,9 @@
 				reg-names = "se";
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi15_default>;
 				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
@@ -3556,9 +3676,9 @@
 			qcom,tcs-offset = <0xd00>;
 			qcom,drv-id = <2>;
 			qcom,tcs-config = <ACTIVE_TCS  2>,
-					  <SLEEP_TCS   1>,
-					  <WAKE_TCS    1>,
-					  <CONTROL_TCS 0>;
+					  <SLEEP_TCS   3>,
+					  <WAKE_TCS    3>,
+					  <CONTROL_TCS 1>;
 
 			rpmhcc: clock-controller {
 				compatible = "qcom,sm8150-rpmh-clk";
@@ -3649,6 +3769,30 @@
 			#freq-domain-cells = <1>;
 		};
 
+		lmh_cluster1: lmh@18350800 {
+			compatible = "qcom,sm8150-lmh";
+			reg = <0 0x18350800 0 0x400>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			cpus = <&CPU4>;
+			qcom,lmh-temp-arm-millicelsius = <60000>;
+			qcom,lmh-temp-low-millicelsius = <84500>;
+			qcom,lmh-temp-high-millicelsius = <85000>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		lmh_cluster0: lmh@18358800 {
+			compatible = "qcom,sm8150-lmh";
+			reg = <0 0x18358800 0 0x400>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			cpus = <&CPU0>;
+			qcom,lmh-temp-arm-millicelsius = <60000>;
+			qcom,lmh-temp-low-millicelsius = <84500>;
+			qcom,lmh-temp-high-millicelsius = <85000>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
 		wifi: wifi@18800000 {
 			compatible = "qcom,wcn3990-wifi";
 			reg = <0 0x18800000 0 0x800000>;
@@ -4265,7 +4409,7 @@
 			};
 		};
 
-		gpu-thermal-top {
+		gpu-top-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
@@ -4445,7 +4589,7 @@
 			};
 		};
 
-		gpu-thermal-bottom {
+		gpu-bottom-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 5617a46e5ccd..fdaf303ba047 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -98,6 +98,8 @@
 			capacity-dmips-mhz = <448>;
 			dynamic-power-coefficient = <205>;
 			next-level-cache = <&L2_0>;
+			power-domains = <&CPU_PD0>;
+			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
@@ -120,6 +122,8 @@
 			capacity-dmips-mhz = <448>;
 			dynamic-power-coefficient = <205>;
 			next-level-cache = <&L2_100>;
+			power-domains = <&CPU_PD1>;
+			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
@@ -139,6 +143,8 @@
 			capacity-dmips-mhz = <448>;
 			dynamic-power-coefficient = <205>;
 			next-level-cache = <&L2_200>;
+			power-domains = <&CPU_PD2>;
+			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
@@ -158,6 +164,8 @@
 			capacity-dmips-mhz = <448>;
 			dynamic-power-coefficient = <205>;
 			next-level-cache = <&L2_300>;
+			power-domains = <&CPU_PD3>;
+			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 0>;
 			operating-points-v2 = <&cpu0_opp_table>;
 			interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
@@ -177,6 +185,8 @@
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <379>;
 			next-level-cache = <&L2_400>;
+			power-domains = <&CPU_PD4>;
+			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			operating-points-v2 = <&cpu4_opp_table>;
 			interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
@@ -196,6 +206,8 @@
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <379>;
 			next-level-cache = <&L2_500>;
+			power-domains = <&CPU_PD5>;
+			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			operating-points-v2 = <&cpu4_opp_table>;
 			interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
@@ -216,6 +228,8 @@
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <379>;
 			next-level-cache = <&L2_600>;
+			power-domains = <&CPU_PD6>;
+			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 1>;
 			operating-points-v2 = <&cpu4_opp_table>;
 			interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
@@ -235,6 +249,8 @@
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <444>;
 			next-level-cache = <&L2_700>;
+			power-domains = <&CPU_PD7>;
+			power-domain-names = "psci";
 			qcom,freq-domain = <&cpufreq_hw 2>;
 			operating-points-v2 = <&cpu7_opp_table>;
 			interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
@@ -281,6 +297,42 @@
 				};
 			};
 		};
+
+		idle-states {
+			entry-method = "psci";
+
+			LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "silver-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <360>;
+				exit-latency-us = <531>;
+				min-residency-us = <3934>;
+				local-timer-stop;
+			};
+
+			BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+				compatible = "arm,idle-state";
+				idle-state-name = "gold-rail-power-collapse";
+				arm,psci-suspend-param = <0x40000004>;
+				entry-latency-us = <702>;
+				exit-latency-us = <1061>;
+				min-residency-us = <4488>;
+				local-timer-stop;
+			};
+		};
+
+		domain-idle-states {
+			CLUSTER_SLEEP_0: cluster-sleep-0 {
+				compatible = "domain-idle-state";
+				idle-state-name = "cluster-llcc-off";
+				arm,psci-suspend-param = <0x4100c244>;
+				entry-latency-us = <3264>;
+				exit-latency-us = <6562>;
+				min-residency-us = <9987>;
+				local-timer-stop;
+			};
+		};
 	};
 
 	cpu0_opp_table: cpu0_opp_table {
@@ -594,6 +646,59 @@
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
+
+		CPU_PD0: cpu0 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD1: cpu1 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD2: cpu2 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD3: cpu3 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+		};
+
+		CPU_PD4: cpu4 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD5: cpu5 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD6: cpu6 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CPU_PD7: cpu7 {
+			#power-domain-cells = <0>;
+			power-domains = <&CLUSTER_PD>;
+			domain-idle-states = <&BIG_CPU_SLEEP_0>;
+		};
+
+		CLUSTER_PD: cpu-cluster0 {
+			#power-domain-cells = <0>;
+			domain-idle-states = <&CLUSTER_SLEEP_0>;
+		};
 	};
 
 	reserved-memory {
@@ -1740,8 +1845,8 @@
 			phys = <&pcie0_lane>;
 			phy-names = "pciephy";
 
-			perst-gpio = <&tlmm 79 GPIO_ACTIVE_LOW>;
-			enable-gpio = <&tlmm 81 GPIO_ACTIVE_HIGH>;
+			perst-gpios = <&tlmm 79 GPIO_ACTIVE_LOW>;
+			wake-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
 
 			pinctrl-names = "default";
 			pinctrl-0 = <&pcie0_default_state>;
@@ -1801,7 +1906,7 @@
 			ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
 
-			interrupts = <GIC_SPI 306 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
@@ -1844,8 +1949,8 @@
 			phys = <&pcie1_lane>;
 			phy-names = "pciephy";
 
-			perst-gpio = <&tlmm 82 GPIO_ACTIVE_LOW>;
-			enable-gpio = <&tlmm 84 GPIO_ACTIVE_HIGH>;
+			perst-gpios = <&tlmm 82 GPIO_ACTIVE_LOW>;
+			wake-gpios = <&tlmm 84 GPIO_ACTIVE_HIGH>;
 
 			pinctrl-names = "default";
 			pinctrl-0 = <&pcie1_default_state>;
@@ -1907,7 +2012,7 @@
 			ranges = <0x01000000 0x0 0x64200000 0x0 0x64200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x64300000 0x0 0x64300000 0x0 0x3d00000>;
 
-			interrupts = <GIC_SPI 236 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
@@ -1950,8 +2055,8 @@
 			phys = <&pcie2_lane>;
 			phy-names = "pciephy";
 
-			perst-gpio = <&tlmm 85 GPIO_ACTIVE_LOW>;
-			enable-gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>;
+			perst-gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
+			wake-gpios = <&tlmm 87 GPIO_ACTIVE_HIGH>;
 
 			pinctrl-names = "default";
 			pinctrl-0 = <&pcie2_default_state>;
@@ -4320,7 +4425,7 @@
 				apr {
 					compatible = "qcom,apr-v2";
 					qcom,glink-channels = "apr_audio_svc";
-					qcom,apr-domain = <APR_DOMAIN_ADSP>;
+					qcom,domain = <APR_DOMAIN_ADSP>;
 					#address-cells = <1>;
 					#size-cells = <0>;
 
@@ -4571,7 +4676,10 @@
 
 			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
 			clock-names = "xo", "alternate";
-
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1", "dcvsh-irq-2";
 			#freq-domain-cells = <1>;
 		};
 	};
@@ -5172,7 +5280,7 @@
 			};
 		};
 
-		gpu-thermal-top {
+		gpu-top-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
@@ -5307,7 +5415,7 @@
 			};
 		};
 
-		gpu-thermal-bottom {
+		gpu-bottom-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 53b39e718fb6..d242bab69c2e 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -35,6 +35,24 @@
 			clock-frequency = <32000>;
 			#clock-cells = <0>;
 		};
+
+		ufs_phy_rx_symbol_0_clk: ufs-phy-rx-symbol-0 {
+			compatible = "fixed-clock";
+			clock-frequency = <1000>;
+			#clock-cells = <0>;
+		};
+
+		ufs_phy_rx_symbol_1_clk: ufs-phy-rx-symbol-1 {
+			compatible = "fixed-clock";
+			clock-frequency = <1000>;
+			#clock-cells = <0>;
+		};
+
+		ufs_phy_tx_symbol_0_clk: ufs-phy-tx-symbol-0 {
+			compatible = "fixed-clock";
+			clock-frequency = <1000>;
+			#clock-cells = <0>;
+		};
 	};
 
 	cpus {
@@ -603,9 +621,9 @@
 				 <0>,
 				 <0>,
 				 <0>,
-				 <0>,
-				 <0>,
-				 <0>,
+				 <&ufs_phy_rx_symbol_0_clk>,
+				 <&ufs_phy_rx_symbol_1_clk>,
+				 <&ufs_phy_tx_symbol_0_clk>,
 				 <0>,
 				 <0>;
 		};
@@ -1425,6 +1443,8 @@
 			interconnect-names = "memory",
 					     "config";
 
+			qcom,qmp = <&aoss_qmp>;
+
 			qcom,smem-states = <&ipa_smp2p_out 0>,
 					   <&ipa_smp2p_out 1>;
 			qcom,smem-state-names = "ipa-clock-enabled-valid",
@@ -1802,7 +1822,7 @@
 			qcom,tcs-offset = <0xd00>;
 			qcom,drv-id = <2>;
 			qcom,tcs-config = <ACTIVE_TCS  2>, <SLEEP_TCS   3>,
-					  <WAKE_TCS    3>, <CONTROL_TCS 1>;
+					  <WAKE_TCS    3>, <CONTROL_TCS 0>;
 
 			rpmhcc: clock-controller {
 				compatible = "qcom,sm8350-rpmh-clk";
@@ -1923,8 +1943,8 @@
 				<75000000 300000000>,
 				<0 0>,
 				<0 0>,
-				<75000000 300000000>,
-				<75000000 300000000>;
+				<0 0>,
+				<0 0>;
 			status = "disabled";
 		};
 
@@ -2991,7 +3011,7 @@
 			};
 		};
 
-		gpu-thermal-top {
+		gpu-top-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
@@ -3006,7 +3026,7 @@
 			};
 		};
 
-		gpu-thermal-bottom {
+		gpu-bottom-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
@@ -3096,7 +3116,7 @@
 			};
 		};
 
-		modem1-thermal-top {
+		modem1-top-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
@@ -3111,7 +3131,7 @@
 			};
 		};
 
-		modem2-thermal-top {
+		modem2-top-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
@@ -3126,7 +3146,7 @@
 			};
 		};
 
-		modem3-thermal-top {
+		modem3-top-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
@@ -3141,7 +3161,7 @@
 			};
 		};
 
-		modem4-thermal-top {
+		modem4-top-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
@@ -3156,7 +3176,7 @@
 			};
 		};
 
-		camera-thermal-top {
+		camera-top-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
@@ -3171,7 +3191,7 @@
 			};
 		};
 
-		cam-thermal-bottom {
+		cam-bottom-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
new file mode 100644
index 000000000000..f0fcb1428449
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
@@ -0,0 +1,405 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8450.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. SM8450 HDK";
+	compatible = "qcom,sm8450-hdk", "qcom,sm8450";
+
+	aliases {
+		serial0 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&apps_rsc {
+	pm8350-rpmh-regulators {
+		compatible = "qcom,pm8350-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-s11-supply = <&vph_pwr>;
+		vdd-s12-supply = <&vph_pwr>;
+
+		vdd-l1-l4-supply = <&vreg_s11b_0p95>;
+		vdd-l2-l7-supply = <&vreg_bob>;
+		vdd-l3-l5-supply = <&vreg_bob>;
+		vdd-l6-l9-l10-supply = <&vreg_s12b_1p25>;
+		vdd-l8-supply = <&vreg_s2h_0p95>;
+
+		vreg_s10b_1p8: smps10 {
+			regulator-name = "vreg_s10b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vreg_s11b_0p95: smps11 {
+			regulator-name = "vreg_s11b_0p95";
+			regulator-min-microvolt = <966000>;
+			regulator-max-microvolt = <1104000>;
+		};
+
+		vreg_s12b_1p25: smps12 {
+			regulator-name = "vreg_s12b_1p25";
+			regulator-min-microvolt = <1350000>;
+			regulator-max-microvolt = <1400000>;
+		};
+
+		vreg_l1b_0p91: ldo1 {
+			regulator-name = "vreg_l1b_0p91";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p07: ldo2 {
+			regulator-name = "vreg_l2b_3p07";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3b_0p9: ldo3 {
+			regulator-name = "vreg_l3b_0p9";
+			regulator-min-microvolt = <904000>;
+			regulator-max-microvolt = <904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_0p88: ldo5 {
+			regulator-name = "vreg_l5b_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <888000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p2: ldo6 {
+			regulator-name = "vreg_l6b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p5: ldo7 {
+			regulator-name = "vreg_l7b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_1p2: ldo9 {
+			regulator-name = "vreg_l9b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	pm8350c-rpmh-regulators {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+
+		vdd-l1-l12-supply = <&vreg_bob>;
+		vdd-l2-l8-supply = <&vreg_bob>;
+		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
+		vdd-l6-l9-l11-supply = <&vreg_bob>;
+		vdd-l10-supply = <&vreg_s12b_1p25>;
+
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_s1c_1p86: smps1 {
+			regulator-name = "vreg_s1c_1p86";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2024000>;
+		};
+
+		vreg_s10c_1p05: smps10 {
+			regulator-name = "vreg_s10c_1p05";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+		};
+
+		vreg_bob: bob {
+			regulator-name = "vreg_bob";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-name = "vreg_l1c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_3p0: ldo3 {
+			regulator-name = "vreg_l3c_3p0";
+			regulator-min-microvolt = <3296000>;
+			regulator-max-microvolt = <3304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c_1p8: ldo4 {
+			regulator-name = "vreg_l4c_1p8";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5c_1p8: ldo5 {
+			regulator-name = "vreg_l5c_1p8";
+			regulator-min-microvolt = <1704000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c_1p8: ldo6 {
+			regulator-name = "vreg_l6c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_3p0: ldo7 {
+			regulator-name = "vreg_l7c_3p0";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p8: ldo8 {
+			regulator-name = "vreg_l8c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p96: ldo9 {
+			regulator-name = "vreg_l9c_2p96";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12c_1p8: ldo12 {
+			regulator-name = "vreg_l12c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1968000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13c_3p0: ldo13 {
+			regulator-name = "vreg_l13c_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	pm8450-rpmh-regulators {
+		compatible = "qcom,pm8450-rpmh-regulators";
+		qcom,pmic-id = "h";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+
+		vdd-l2-supply = <&vreg_bob>;
+		vdd-l3-supply = <&vreg_bob>;
+		vdd-l4-supply = <&vreg_bob>;
+
+		vreg_s2h_0p95: smps2 {
+			regulator-name = "vreg_s2h_0p95";
+			regulator-min-microvolt = <848000>;
+			regulator-max-microvolt = <1104000>;
+		};
+
+		vreg_s3h_0p5: smps3 {
+			regulator-name = "vreg_s3h_0p5";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <500000>;
+		};
+
+		vreg_l2h_0p91: ldo2 {
+			regulator-name = "vreg_l2h_0p91";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3h_0p91: ldo3 {
+			regulator-name = "vreg_l3h_0p91";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+	};
+
+	pmr735a-rpmh-regulators {
+		compatible = "qcom,pmr735a-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+
+		vdd-l1-l2-supply = <&vreg_s2e_0p85>;
+		vdd-l3-supply = <&vreg_s1e_1p25>;
+		vdd-l4-supply = <&vreg_s1c_1p86>;
+		vdd-l5-l6-supply = <&vreg_s1c_1p86>;
+		vdd-l7-bob-supply = <&vreg_bob>;
+
+		vreg_s1e_1p25: smps1 {
+			regulator-name = "vreg_s1e_1p25";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1296000>;
+		};
+
+		vreg_s2e_0p85: smps2 {
+			regulator-name = "vreg_s2e_0p85";
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1040000>;
+		};
+
+		vreg_l1e_0p8: ldo1 {
+			regulator-name = "vreg_l1e_0p8";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_l2e_0p8: ldo2 {
+			regulator-name = "vreg_l2e_0p8";
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_l4e_1p7: ldo4 {
+			regulator-name = "vreg_l4e_1p7";
+			regulator-min-microvolt = <1776000>;
+			regulator-max-microvolt = <1776000>;
+		};
+
+		vreg_l5e_0p88: ldo5 {
+			regulator-name = "vreg_l5e_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+		};
+
+		vreg_l6e_1p2: ldo6 {
+			regulator-name = "vreg_l6e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		vreg_l7e_2p8: ldo7 {
+			regulator-name = "vreg_l7e_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+	};
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <28 4>, <36 4>;
+};
+
+&uart7 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	status = "okay";
+
+	reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l7b_2p5>;
+	vcc-max-microamp = <1100000>;
+	vccq-supply = <&vreg_l9b_1p2>;
+	vccq-max-microamp = <1200000>;
+};
+
+&ufs_mem_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l5b_0p88>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+	vdda-max-microamp = <173000>;
+	vdda-pll-max-microamp = <24900>;
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+	status = "okay";
+
+	vdda-pll-supply = <&vreg_l5b_0p88>;
+	vdda18-supply = <&vreg_l1c_1p8>;
+	vdda33-supply = <&vreg_l2b_3p07>;
+};
+
+&usb_1_qmpphy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l6b_1p2>;
+	vdda-pll-supply = <&vreg_l1b_0p91>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts
index b68ab247e6ae..9526632d4029 100644
--- a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts
+++ b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts
@@ -346,6 +346,26 @@
 	status = "okay";
 };
 
+&remoteproc_adsp {
+	status = "okay";
+	firmware-name = "qcom/sm8450/adsp.mbn";
+};
+
+&remoteproc_cdsp {
+	status = "okay";
+	firmware-name = "qcom/sm8450/cdsp.mbn";
+};
+
+&remoteproc_mpss {
+	status = "okay";
+	firmware-name = "qcom/sm8450/modem.mbn";
+};
+
+&remoteproc_slpi {
+	status = "okay";
+	firmware-name = "qcom/sm8450/slpi.mbn";
+};
+
 &tlmm {
 	gpio-reserved-ranges = <28 4>, <36 4>;
 };
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 10c25ad2d0c7..934e29b9e153 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -7,7 +7,9 @@
 #include <dt-bindings/clock/qcom,gcc-sm8450.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mailbox/qcom-ipcc.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/interconnect/qcom,sm8450.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 
 / {
@@ -203,9 +205,9 @@
 				compatible = "arm,idle-state";
 				idle-state-name = "silver-rail-power-collapse";
 				arm,psci-suspend-param = <0x40000004>;
-				entry-latency-us = <274>;
-				exit-latency-us = <480>;
-				min-residency-us = <3934>;
+				entry-latency-us = <800>;
+				exit-latency-us = <750>;
+				min-residency-us = <4090>;
 				local-timer-stop;
 			};
 
@@ -213,9 +215,9 @@
 				compatible = "arm,idle-state";
 				idle-state-name = "gold-rail-power-collapse";
 				arm,psci-suspend-param = <0x40000004>;
-				entry-latency-us = <327>;
-				exit-latency-us = <1502>;
-				min-residency-us = <4488>;
+				entry-latency-us = <600>;
+				exit-latency-us = <1550>;
+				min-residency-us = <4791>;
 				local-timer-stop;
 			};
 		};
@@ -224,10 +226,10 @@
 			CLUSTER_SLEEP_0: cluster-sleep-0 {
 				compatible = "domain-idle-state";
 				idle-state-name = "cluster-l3-off";
-				arm,psci-suspend-param = <0x4100c344>;
-				entry-latency-us = <584>;
-				exit-latency-us = <2332>;
-				min-residency-us = <6118>;
+				arm,psci-suspend-param = <0x41000044>;
+				entry-latency-us = <1050>;
+				exit-latency-us = <2500>;
+				min-residency-us = <5309>;
 				local-timer-stop;
 			};
 
@@ -235,9 +237,9 @@
 				compatible = "domain-idle-state";
 				idle-state-name = "cluster-power-collapse";
 				arm,psci-suspend-param = <0x4100c344>;
-				entry-latency-us = <2893>;
-				exit-latency-us = <4023>;
-				min-residency-us = <9987>;
+				entry-latency-us = <2700>;
+				exit-latency-us = <3500>;
+				min-residency-us = <13959>;
 				local-timer-stop;
 			};
 		};
@@ -250,6 +252,18 @@
 		};
 	};
 
+	clk_virt: interconnect@0 {
+		compatible = "qcom,sm8450-clk-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
+	mc_virt: interconnect@1 {
+		compatible = "qcom,sm8450-mc-virt";
+		#interconnect-cells = <2>;
+		qcom,bcm-voters = <&apps_bcm_voter>;
+	};
+
 	memory@a0000000 {
 		device_type = "memory";
 		/* We expect the bootloader to fill in the size */
@@ -315,7 +329,7 @@
 
 		CLUSTER_PD: cpu-cluster0 {
 			#power-domain-cells = <0>;
-			domain-idle-states = <&CLUSTER_SLEEP_0>;
+			domain-idle-states = <&CLUSTER_SLEEP_0>, <&CLUSTER_SLEEP_1>;
 		};
 	};
 
@@ -460,6 +474,15 @@
 			no-map;
 		};
 
+		rmtfs_mem: memory@9fd00000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0x9fd00000 0x0 0x280000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <15>;
+		};
+
 		global_sync_mem: memory@a6f00000 {
 			reg = <0x0 0xa6f00000 0x0 0x100000>;
 			no-map;
@@ -540,6 +563,113 @@
 		};
 	};
 
+	smp2p-adsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <443>, <429>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_LPASS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <2>;
+
+		smp2p_adsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_adsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-cdsp {
+		compatible = "qcom,smp2p";
+		qcom,smem = <94>, <432>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_CDSP
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <5>;
+
+		smp2p_cdsp_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_cdsp_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-modem {
+		compatible = "qcom,smp2p";
+		qcom,smem = <435>, <428>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_MPSS
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <1>;
+
+		smp2p_modem_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_modem_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		ipa_smp2p_out: ipa-ap-to-modem {
+			qcom,entry-name = "ipa";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		ipa_smp2p_in: ipa-modem-to-ap {
+			qcom,entry-name = "ipa";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
+	smp2p-slpi {
+		compatible = "qcom,smp2p";
+		qcom,smem = <481>, <430>;
+		interrupts-extended = <&ipcc IPCC_CLIENT_SLPI
+					     IPCC_MPROC_SIGNAL_SMP2P
+					     IRQ_TYPE_EDGE_RISING>;
+		mboxes = <&ipcc IPCC_CLIENT_SLPI
+				IPCC_MPROC_SIGNAL_SMP2P>;
+
+		qcom,local-pid = <0>;
+		qcom,remote-pid = <3>;
+
+		smp2p_slpi_out: master-kernel {
+			qcom,entry-name = "master-kernel";
+			#qcom,smem-state-cells = <1>;
+		};
+
+		smp2p_slpi_in: slave-kernel {
+			qcom,entry-name = "slave-kernel";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
 	soc: soc@0 {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -620,6 +750,54 @@
 			};
 		};
 
+		config_noc: interconnect@1500000 {
+			compatible = "qcom,sm8450-config-noc";
+			reg = <0 0x01500000 0 0x1c000>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		system_noc: interconnect@1680000 {
+			compatible = "qcom,sm8450-system-noc";
+			reg = <0 0x01680000 0 0x1e200>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		pcie_noc: interconnect@16c0000 {
+			compatible = "qcom,sm8450-pcie-anoc";
+			reg = <0 0x016c0000 0 0xe280>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre1_noc: interconnect@16e0000 {
+			compatible = "qcom,sm8450-aggre1-noc";
+			reg = <0 0x016e0000 0 0x1c080>;
+			#interconnect-cells = <2>;
+			clocks = <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre2_noc: interconnect@1700000 {
+			compatible = "qcom,sm8450-aggre2-noc";
+			reg = <0 0x01700000 0 0x31080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+			clocks = <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>,
+				 <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				 <&rpmhcc RPMH_IPA_CLK>;
+		};
+
+		mmss_noc: interconnect@1740000 {
+			compatible = "qcom,sm8450-mmss-noc";
+			reg = <0 0x01740000 0 0x1f080>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
 		tcsr_mutex: hwlock@1f40000 {
 			compatible = "qcom,tcsr-mutex";
 			reg = <0x0 0x01f40000 0x0 0x40000>;
@@ -672,6 +850,167 @@
 			};
 		};
 
+		remoteproc_slpi: remoteproc@2400000 {
+			compatible = "qcom,sm8450-slpi-pas";
+			reg = <0 0x02400000 0 0x4000>;
+
+			interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>,
+					      <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SM8450_LCX>,
+					<&rpmhpd SM8450_LMX>;
+			power-domain-names = "lcx", "lmx";
+
+			memory-region = <&slpi_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_slpi_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_SLPI
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_SLPI
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "slpi";
+				qcom,remote-pid = <3>;
+			};
+		};
+
+		remoteproc_adsp: remoteproc@30000000 {
+			compatible = "qcom,sm8450-adsp-pas";
+			reg = <0 0x030000000 0 0x100>;
+
+			interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+					      <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SM8450_LCX>,
+					<&rpmhpd SM8450_LMX>;
+			power-domain-names = "lcx", "lmx";
+
+			memory-region = <&adsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_adsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			remoteproc_adsp_glink: glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_LPASS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "lpass";
+				qcom,remote-pid = <2>;
+			};
+		};
+
+		remoteproc_cdsp: remoteproc@32300000 {
+			compatible = "qcom,sm8450-cdsp-pas";
+			reg = <0 0x032300000 0 0x1400000>;
+
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
+					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready",
+					  "handover", "stop-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd SM8450_CX>,
+					<&rpmhpd SM8450_MXC>;
+			power-domain-names = "cx", "mxc";
+
+			memory-region = <&cdsp_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_cdsp_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_CDSP
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "cdsp";
+				qcom,remote-pid = <5>;
+			};
+		};
+
+		remoteproc_mpss: remoteproc@4080000 {
+			compatible = "qcom,sm8450-mpss-pas";
+			reg = <0x0 0x04080000 0x0 0x4040>;
+
+			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>,
+					      <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "wdog", "fatal", "ready", "handover",
+					  "stop-ack", "shutdown-ack";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "xo";
+
+			power-domains = <&rpmhpd 0>,
+					<&rpmhpd 12>;
+			power-domain-names = "cx", "mss";
+
+			memory-region = <&mpss_mem>;
+
+			qcom,qmp = <&aoss_qmp>;
+
+			qcom,smem-states = <&smp2p_modem_out 0>;
+			qcom,smem-state-names = "stop";
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_MPSS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+				interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
+				label = "modem";
+				qcom,remote-pid = <1>;
+			};
+		};
+
 		pdc: interrupt-controller@b220000 {
 			compatible = "qcom,sm8450-pdc", "qcom,pdc";
 			reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>;
@@ -682,6 +1021,25 @@
 			interrupt-controller;
 		};
 
+		aoss_qmp: power-controller@c300000 {
+			compatible = "qcom,sm8450-aoss-qmp", "qcom,aoss-qmp";
+			reg = <0 0x0c300000 0 0x400>;
+			interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
+						     IRQ_TYPE_EDGE_RISING>;
+			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+			#clock-cells = <0>;
+		};
+
+		ipcc: mailbox@ed18000 {
+			compatible = "qcom,sm8450-ipcc", "qcom,ipcc";
+			reg = <0 0x0ed18000 0 0x1000>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			#mbox-cells = <2>;
+		};
+
 		tlmm: pinctrl@f100000 {
 			compatible = "qcom,sm8450-tlmm";
 			reg = <0 0x0f100000 0 0x300000>;
@@ -726,7 +1084,7 @@
 			compatible = "qcom,sm8450-smmu-500", "arm,mmu-500";
 			reg = <0 0x15000000 0 0x100000>;
 			#iommu-cells = <2>;
-			#global-interrupts = <2>;
+			#global-interrupts = <1>;
 			interrupts =    <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
@@ -813,6 +1171,7 @@
 					<GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
@@ -988,6 +1347,20 @@
 			#freq-domain-cells = <1>;
 		};
 
+		gem_noc: interconnect@19100000 {
+			compatible = "qcom,sm8450-gem-noc";
+			reg = <0 0x19100000 0 0xbb800>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		system-cache-controller@19200000 {
+			compatible = "qcom,sm8450-llcc";
+			reg = <0 0x19200000 0 0x580000>, <0 0x19a00000 0 0x80000>;
+			reg-names = "llcc_base", "llcc_broadcast_base";
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		ufs_mem_hc: ufshc@1d84000 {
 			compatible = "qcom,sm8450-ufshc", "qcom,ufshc",
 				     "jedec,ufs-2.0";
@@ -1004,6 +1377,9 @@
 
 			iommus = <&apps_smmu 0xe0 0x0>;
 
+			interconnects = <&aggre1_noc MASTER_UFS_MEM &mc_virt SLAVE_EBI1>,
+					<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_UFS_MEM_CFG>;
+			interconnect-names = "ufs-ddr", "cpu-ufs";
 			clock-names =
 				"core_clk",
 				"bus_aggr_clk",
@@ -1072,9 +1448,10 @@
 				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
 				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
 				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
-				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>;
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB3_0_CLKREF_EN>;
 			clock-names = "cfg_noc", "core", "iface", "mock_utmi",
-				      "sleep";
+				      "sleep", "xo";
 
 			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
@@ -1102,6 +1479,20 @@
 				phy-names = "usb2-phy", "usb3-phy";
 			};
 		};
+
+		nsp_noc: interconnect@320c0000 {
+			compatible = "qcom,sm8450-nsp-noc";
+			reg = <0 0x320c0000 0 0x10000>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		lpass_ag_noc: interconnect@3c40000 {
+			compatible = "qcom,sm8450-lpass-ag-noc";
+			reg = <0 0x3c40000 0 0x17200>;
+			#interconnect-cells = <2>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
 	};
 
 	timer {
diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index 5bc8065a7864..d000f6b131dc 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -75,4 +75,7 @@ dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-ulcb-kf.dtb
 
 dtb-$(CONFIG_ARCH_R8A77965) += r8a779m5-salvator-xs.dtb
 
+dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044c2-smarc.dtb
 dtb-$(CONFIG_ARCH_R9A07G044) += r9a07g044l2-smarc.dtb
+
+dtb-$(CONFIG_ARCH_R9A07G054) += r9a07g054l2-smarc.dtb
diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
index 2692cc64bff6..5ad6cd1864c1 100644
--- a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
+++ b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
@@ -359,11 +359,10 @@
 		clocks = <&x304_clk>;
 		clock-names = "xin";
 
-		assigned-clocks = <&versaclock6_bb 1>,
-				   <&versaclock6_bb 2>,
-				   <&versaclock6_bb 3>,
-				   <&versaclock6_bb 4>;
-		assigned-clock-rates =	<24000000>, <24000000>, <24000000>, <24576000>;
+		assigned-clocks = <&versaclock6_bb 1>, <&versaclock6_bb 2>,
+				  <&versaclock6_bb 3>, <&versaclock6_bb 4>;
+		assigned-clock-rates = <24000000>, <24000000>, <24000000>,
+				       <24576000>;
 
 		OUT1 {
 			idt,mode = <VC5_CMOS>;
diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
index 0d136809eb96..877d076ffcc9 100644
--- a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
+++ b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
@@ -77,7 +77,7 @@
 };
 
 &gpio6 {
-	usb_hub_reset {
+	usb-hub-reset-hog {
 		gpio-hog;
 		gpios = <10 GPIO_ACTIVE_HIGH>;
 		output-high;
@@ -293,7 +293,6 @@
 	vqmmc-supply = <&reg_1p8v>;
 	non-removable;
 	cap-power-off-card;
-	pm-ignore-notify;
 	keep-power-in-suspend;
 	mmc-pwrseq = <&wlan_pwrseq>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/renesas/gmsl-cameras.dtsi b/arch/arm64/boot/dts/renesas/gmsl-cameras.dtsi
new file mode 100644
index 000000000000..d45f072f8cdf
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/gmsl-cameras.dtsi
@@ -0,0 +1,332 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017 Ideas on Board <kieran.bingham@ideasonboard.com>
+ * Copyright (C) 2021 Jacopo Mondi <jacopo+renesas@jmondi.org>
+ *
+ * Device Tree Source (overlay) that describes GMSL camera connected to
+ * Fakra connectors for the Eagle V3M and Condor V3H (and compatible) boards.
+ *
+ * The following cameras are currently supported: RDACM20 and RDACM21.
+ *
+ * The board .dts file that include this has to select which cameras are in use
+ * by specifying the camera model with:
+ *
+ * #define GMSL_CAMERA_RDACM20
+ * or
+ * #define GMSL_CAMERA_RDACM21
+ *
+ * And which cameras are connected to the board by defining:
+ * for GMSL channel 0:
+ *	   #define GMSL_CAMERA_0
+ *	   #define GMSL_CAMERA_1
+ *	   #define GMSL_CAMERA_2
+ *	   #define GMSL_CAMERA_3
+ *
+ * for GMSL channel 1:
+ *	   #define GMSL_CAMERA_4
+ *	   #define GMSL_CAMERA_5
+ *	   #define GMSL_CAMERA_6
+ *	   #define GMSL_CAMERA_7
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/* Validate the board file settings. */
+#if !defined(GMSL_CAMERA_RDACM20) && !defined(GMSL_CAMERA_RDACM21)
+#error "Camera model should be defined by the board file"
+#endif
+
+#if defined(GMSL_CAMERA_RDACM20) && defined(GMSL_CAMERA_RDACM21)
+#error "A single camera model should be selected"
+#endif
+
+#if !defined(GMSL_CAMERA_0) && !defined(GMSL_CAMERA_1) && \
+    !defined(GMSL_CAMERA_2) && !defined(GMSL_CAMERA_3) && \
+    !defined(GMSL_CAMERA_4) && !defined(GMSL_CAMERA_5) && \
+    !defined(GMSL_CAMERA_6) && !defined(GMSL_CAMERA_7)
+#error "At least one camera should be selected"
+#endif
+
+/* Deduce from the enabled cameras which GMSL channels are active. */
+#if defined(GMSL_CAMERA_0) || defined(GMSL_CAMERA_1) || \
+    defined(GMSL_CAMERA_2) || defined(GMSL_CAMERA_3)
+#define GMSL_0
+#endif
+
+#if defined(GMSL_CAMERA_4) || defined(GMSL_CAMERA_5) || \
+    defined(GMSL_CAMERA_6) || defined(GMSL_CAMERA_7)
+#define GMSL_1
+#endif
+
+/* Deduce the camera model compatible string. */
+#if defined(GMSL_CAMERA_RDACM20)
+#define GMSL_CAMERA_MODEL "imi,rdacm20"
+#elif defined(GMSL_CAMERA_RDACM21)
+#define GMSL_CAMERA_MODEL "imi,rdacm21"
+#endif
+
+#ifdef GMSL_0
+&vin0 {
+	status = "okay";
+};
+
+&vin1 {
+	status = "okay";
+};
+
+&vin2 {
+	status = "okay";
+};
+
+&vin3 {
+	status = "okay";
+};
+
+&gmsl0 {
+	status = "okay";
+
+#if defined(GMSL_CAMERA_RDACM21)
+	maxim,reverse-channel-microvolt = <100000>;
+#endif
+
+	ports {
+#ifdef GMSL_CAMERA_0
+		port@0 {
+			max9286_in0: endpoint {
+				remote-endpoint = <&fakra_con0>;
+			};
+		};
+#endif
+
+#ifdef GMSL_CAMERA_1
+		port@1 {
+			max9286_in1: endpoint{
+				remote-endpoint = <&fakra_con1>;
+			};
+
+		};
+#endif
+
+#ifdef GMSL_CAMERA_2
+		port@2 {
+			max9286_in2: endpoint {
+				remote-endpoint = <&fakra_con2>;
+			};
+
+		};
+#endif
+
+#ifdef GMSL_CAMERA_3
+		port@3 {
+			max9286_in3: endpoint {
+				remote-endpoint = <&fakra_con3>;
+			};
+
+		};
+#endif
+	};
+
+	i2c-mux {
+#ifdef GMSL_CAMERA_0
+		i2c@0 {
+			status = "okay";
+
+			camera@51 {
+				compatible = GMSL_CAMERA_MODEL;
+				reg = <0x51>, <0x61>;
+
+				port {
+					fakra_con0: endpoint {
+						remote-endpoint = <&max9286_in0>;
+					};
+				};
+			};
+		};
+#endif
+
+#ifdef GMSL_CAMERA_1
+		i2c@1 {
+			status = "okay";
+
+			camera@52 {
+				compatible = GMSL_CAMERA_MODEL;
+				reg = <0x52>, <0x62>;
+
+				port {
+					fakra_con1: endpoint {
+						remote-endpoint = <&max9286_in1>;
+					};
+				};
+			};
+		};
+#endif
+
+#ifdef GMSL_CAMERA_2
+		i2c@2 {
+			status = "okay";
+
+			camera@53 {
+				compatible = GMSL_CAMERA_MODEL;
+				reg = <0x53>, <0x63>;
+
+				port {
+					fakra_con2: endpoint {
+						remote-endpoint = <&max9286_in2>;
+					};
+				};
+			};
+		};
+#endif
+
+#ifdef GMSL_CAMERA_3
+		i2c@3 {
+			status = "okay";
+
+			camera@54 {
+				compatible = GMSL_CAMERA_MODEL;
+				reg = <0x54>, <0x64>;
+
+				port {
+					fakra_con3: endpoint {
+						remote-endpoint = <&max9286_in3>;
+					};
+				};
+			};
+		};
+#endif
+	};
+};
+#endif /* ifdef GMSL_0 */
+
+#ifdef GMSL_1
+&vin4 {
+	status = "okay";
+};
+
+&vin5 {
+	status = "okay";
+};
+
+&vin6 {
+	status = "okay";
+};
+
+&vin7 {
+	status = "okay";
+};
+
+&gmsl1 {
+	status = "okay";
+
+#if defined(GMSL_CAMERA_RDACM21)
+	maxim,reverse-channel-microvolt = <100000>;
+#endif
+
+	ports {
+#ifdef GMSL_CAMERA_4
+		port@0 {
+			max9286_in4: endpoint {
+				remote-endpoint = <&fakra_con4>;
+			};
+		};
+#endif
+
+#ifdef GMSL_CAMERA_5
+		port@1 {
+			max9286_in5: endpoint{
+				remote-endpoint = <&fakra_con5>;
+			};
+
+		};
+#endif
+
+#ifdef GMSL_CAMERA_6
+		port@2 {
+			max9286_in6: endpoint {
+				remote-endpoint = <&fakra_con6>;
+			};
+
+		};
+#endif
+
+#ifdef GMSL_CAMERA_7
+		port@3 {
+			max9286_in7: endpoint {
+				remote-endpoint = <&fakra_con7>;
+			};
+
+		};
+#endif
+	};
+
+	i2c-mux {
+#ifdef GMSL_CAMERA_4
+		i2c@0 {
+			status = "okay";
+
+			camera@55 {
+				compatible = GMSL_CAMERA_MODEL;
+				reg = <0x55>, <0x65>;
+
+				port {
+					fakra_con4: endpoint {
+						remote-endpoint = <&max9286_in4>;
+					};
+				};
+			};
+		};
+#endif
+
+#ifdef GMSL_CAMERA_5
+		i2c@1 {
+			status = "okay";
+
+			camera@56 {
+				compatible = GMSL_CAMERA_MODEL;
+				reg = <0x56>, <0x66>;
+
+				port {
+					fakra_con5: endpoint {
+						remote-endpoint = <&max9286_in5>;
+					};
+				};
+			};
+		};
+#endif
+
+#ifdef GMSL_CAMERA_6
+		i2c@2 {
+			status = "okay";
+
+			camera@57 {
+				compatible = GMSL_CAMERA_MODEL;
+				reg = <0x57>, <0x67>;
+
+				port {
+					fakra_con6: endpoint {
+						remote-endpoint = <&max9286_in6>;
+					};
+				};
+			};
+		};
+#endif
+
+#ifdef GMSL_CAMERA_7
+		i2c@3 {
+			status = "okay";
+
+			camera@58 {
+				compatible = GMSL_CAMERA_MODEL;
+				reg = <0x58>, <0x68>;
+
+				port {
+					fakra_con7: endpoint {
+						remote-endpoint = <&max9286_in7>;
+					};
+				};
+			};
+		};
+#endif
+	};
+};
+#endif /* ifdef GMSL_1 */
diff --git a/arch/arm64/boot/dts/renesas/hihope-common.dtsi b/arch/arm64/boot/dts/renesas/hihope-common.dtsi
index 0c7e6f790590..935d06515aa6 100644
--- a/arch/arm64/boot/dts/renesas/hihope-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/hihope-common.dtsi
@@ -140,7 +140,7 @@
 };
 
 &gpio6 {
-	usb1-reset {
+	usb1-reset-hog {
 		gpio-hog;
 		gpios = <10 GPIO_ACTIVE_LOW>;
 		output-low;
diff --git a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex-lvds.dtsi b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex-lvds.dtsi
index 40c5e8d6d841..d66d17e34694 100644
--- a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex-lvds.dtsi
+++ b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex-lvds.dtsi
@@ -20,7 +20,7 @@
 	 * When GP1_20 is LOW LVDS0 is connected to the LVDS connector
 	 * When GP1_20 is HIGH LVDS0 is connected to the LT8918L
 	 */
-	lvds-connector-en-gpio {
+	lvds-connector-en-hog {
 		gpio-hog;
 		gpios = <20 GPIO_ACTIVE_HIGH>;
 		output-low;
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
index eda6a840371a..12846125a4c9 100644
--- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
@@ -1698,12 +1698,12 @@
 			 * clkout	: #clock-cells = <0>;	<&rcar_sound>;
 			 * clkout0/1/2/3: #clock-cells = <1>;	<&rcar_sound N>;
 			 */
-			compatible =  "renesas,rcar_sound-r8a774a1", "renesas,rcar_sound-gen3";
-			reg =	<0 0xec500000 0 0x1000>, /* SCU */
-				<0 0xec5a0000 0 0x100>,  /* ADG */
-				<0 0xec540000 0 0x1000>, /* SSIU */
-				<0 0xec541000 0 0x280>,  /* SSI */
-				<0 0xec760000 0 0x200>;  /* Audio DMAC peri peri*/
+			compatible = "renesas,rcar_sound-r8a774a1", "renesas,rcar_sound-gen3";
+			reg = <0 0xec500000 0 0x1000>, /* SCU */
+			      <0 0xec5a0000 0 0x100>,  /* ADG */
+			      <0 0xec540000 0 0x1000>, /* SSIU */
+			      <0 0xec541000 0 0x280>,  /* SSI */
+			      <0 0xec760000 0 0x200>;  /* Audio DMAC peri peri*/
 			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
 
 			clocks = <&cpg CPG_MOD 1005>,
@@ -2010,7 +2010,7 @@
 					dma-names = "rx", "tx";
 				};
 				ssiu40: ssiu-32 {
-					dmas =	<&audma0 0x71>, <&audma1 0x72>;
+					dmas = <&audma0 0x71>, <&audma1 0x72>;
 					dma-names = "rx", "tx";
 				};
 				ssiu41: ssiu-33 {
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1-beacon-rzg2n-kit.dts b/arch/arm64/boot/dts/renesas/r8a774b1-beacon-rzg2n-kit.dts
index 3c0d59def8ee..89d708346ba8 100644
--- a/arch/arm64/boot/dts/renesas/r8a774b1-beacon-rzg2n-kit.dts
+++ b/arch/arm64/boot/dts/renesas/r8a774b1-beacon-rzg2n-kit.dts
@@ -11,7 +11,7 @@
 
 / {
 	model = "Beacon Embedded Works RZ/G2N Development Kit";
-	compatible =	"beacon,beacon-rzg2n", "renesas,r8a774b1";
+	compatible = "beacon,beacon-rzg2n", "renesas,r8a774b1";
 
 	aliases {
 		serial0 = &scif2;
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
index 44f79fbd75dc..a4b406a346f9 100644
--- a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
@@ -1571,7 +1571,7 @@
 			 * clkout	: #clock-cells = <0>;	<&rcar_sound>;
 			 * clkout0/1/2/3: #clock-cells = <1>;	<&rcar_sound N>;
 			 */
-			compatible =  "renesas,rcar_sound-r8a774b1", "renesas,rcar_sound-gen3";
+			compatible = "renesas,rcar_sound-r8a774b1", "renesas,rcar_sound-gen3";
 			reg = <0 0xec500000 0 0x1000>, /* SCU */
 			      <0 0xec5a0000 0 0x100>,  /* ADG */
 			      <0 0xec540000 0 0x1000>, /* SSIU */
@@ -1883,7 +1883,7 @@
 					dma-names = "rx", "tx";
 				};
 				ssiu40: ssiu-32 {
-					dmas =	<&audma0 0x71>, <&audma1 0x72>;
+					dmas = <&audma0 0x71>, <&audma1 0x72>;
 					dma-names = "rx", "tx";
 				};
 				ssiu41: ssiu-33 {
diff --git a/arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dts b/arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dts
index a7b27d09f6c2..c1812d1ef06a 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dts
+++ b/arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dts
@@ -68,7 +68,7 @@
 	 * When GP0_17 is low LVDS[01] are connected to the LVDS connector
 	 * When GP0_17 is high LVDS[01] are connected to the LT8918L
 	 */
-	lvds-connector-en-gpio{
+	lvds-connector-en-hog {
 		gpio-hog;
 		gpios = <17 GPIO_ACTIVE_HIGH>;
 		output-low;
diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
index b8dcbbbf3db5..e123c8d1bab9 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -1328,11 +1328,11 @@
 			 */
 			compatible = "renesas,rcar_sound-r8a774c0",
 				     "renesas,rcar_sound-gen3";
-			reg =	<0 0xec500000 0 0x1000>, /* SCU */
-				<0 0xec5a0000 0 0x100>,  /* ADG */
-				<0 0xec540000 0 0x1000>, /* SSIU */
-				<0 0xec541000 0 0x280>,  /* SSI */
-				<0 0xec760000 0 0x200>;  /* Audio DMAC peri peri*/
+			reg = <0 0xec500000 0 0x1000>, /* SCU */
+			      <0 0xec5a0000 0 0x100>,  /* ADG */
+			      <0 0xec540000 0 0x1000>, /* SSIU */
+			      <0 0xec541000 0 0x280>,  /* SSI */
+			      <0 0xec760000 0 0x200>;  /* Audio DMAC peri peri*/
 			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
 
 			clocks = <&cpg CPG_MOD 1005>,
diff --git a/arch/arm64/boot/dts/renesas/r8a774e1-beacon-rzg2h-kit.dts b/arch/arm64/boot/dts/renesas/r8a774e1-beacon-rzg2h-kit.dts
index 7b6649a3ded0..3e9ced3b2d33 100644
--- a/arch/arm64/boot/dts/renesas/r8a774e1-beacon-rzg2h-kit.dts
+++ b/arch/arm64/boot/dts/renesas/r8a774e1-beacon-rzg2h-kit.dts
@@ -11,7 +11,7 @@
 
 / {
 	model = "Beacon Embedded Works RZ/G2H Development Kit";
-	compatible =	"beacon,beacon-rzg2h", "renesas,r8a774e1";
+	compatible = "beacon,beacon-rzg2h", "renesas,r8a774e1";
 
 	aliases {
 		serial0 = &scif2;
diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
index e6d8610730a8..989c1c00dcdc 100644
--- a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
@@ -1784,7 +1784,7 @@
 			 * clkout	: #clock-cells = <0>;	<&rcar_sound>;
 			 * clkout0/1/2/3: #clock-cells = <1>;	<&rcar_sound N>;
 			 */
-			compatible =  "renesas,rcar_sound-r8a774e1", "renesas,rcar_sound-gen3";
+			compatible = "renesas,rcar_sound-r8a774e1", "renesas,rcar_sound-gen3";
 			reg = <0 0xec500000 0 0x1000>, /* SCU */
 			      <0 0xec5a0000 0 0x100>,  /* ADG */
 			      <0 0xec540000 0 0x1000>, /* SSIU */
@@ -2043,7 +2043,7 @@
 					dma-names = "rx", "tx";
 				};
 				ssiu40: ssiu-32 {
-					dmas =	<&audma0 0x71>, <&audma1 0x72>;
+					dmas = <&audma0 0x71>, <&audma1 0x72>;
 					dma-names = "rx", "tx";
 				};
 				ssiu41: ssiu-33 {
diff --git a/arch/arm64/boot/dts/renesas/r8a77951.dtsi b/arch/arm64/boot/dts/renesas/r8a77951.dtsi
index 9265a5702792..4e87e8776a2b 100644
--- a/arch/arm64/boot/dts/renesas/r8a77951.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77951.dtsi
@@ -2018,12 +2018,12 @@
 			 * clkout	: #clock-cells = <0>;	<&rcar_sound>;
 			 * clkout0/1/2/3: #clock-cells = <1>;	<&rcar_sound N>;
 			 */
-			compatible =  "renesas,rcar_sound-r8a7795", "renesas,rcar_sound-gen3";
-			reg =	<0 0xec500000 0 0x1000>, /* SCU */
-				<0 0xec5a0000 0 0x100>,  /* ADG */
-				<0 0xec540000 0 0x1000>, /* SSIU */
-				<0 0xec541000 0 0x280>,  /* SSI */
-				<0 0xec760000 0 0x200>;  /* Audio DMAC peri peri*/
+			compatible = "renesas,rcar_sound-r8a7795", "renesas,rcar_sound-gen3";
+			reg = <0 0xec500000 0 0x1000>, /* SCU */
+			      <0 0xec5a0000 0 0x100>,  /* ADG */
+			      <0 0xec540000 0 0x1000>, /* SSIU */
+			      <0 0xec541000 0 0x280>,  /* SSI */
+			      <0 0xec760000 0 0x200>;  /* Audio DMAC peri peri*/
 			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
 
 			clocks = <&cpg CPG_MOD 1005>,
@@ -2277,7 +2277,7 @@
 					dma-names = "rx", "tx";
 				};
 				ssiu40: ssiu-32 {
-					dmas =	<&audma0 0x71>, <&audma1 0x72>;
+					dmas = <&audma0 0x71>, <&audma1 0x72>;
 					dma-names = "rx", "tx";
 				};
 				ssiu41: ssiu-33 {
@@ -2412,6 +2412,18 @@
 			};
 		};
 
+		mlp: mlp@ec520000 {
+			compatible = "renesas,r8a7795-mlp",
+				     "renesas,rcar-gen3-mlp";
+			reg = <0 0xec520000 0 0x800>;
+			interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 802>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 802>;
+			status = "disabled";
+		};
+
 		audma0: dma-controller@ec700000 {
 			compatible = "renesas,dmac-r8a7795",
 				     "renesas,rcar-dmac";
diff --git a/arch/arm64/boot/dts/renesas/r8a77960.dtsi b/arch/arm64/boot/dts/renesas/r8a77960.dtsi
index 26f7103d11da..6f79da8cc8c0 100644
--- a/arch/arm64/boot/dts/renesas/r8a77960.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77960.dtsi
@@ -1890,12 +1890,12 @@
 			 * clkout	: #clock-cells = <0>;	<&rcar_sound>;
 			 * clkout0/1/2/3: #clock-cells = <1>;	<&rcar_sound N>;
 			 */
-			compatible =  "renesas,rcar_sound-r8a7796", "renesas,rcar_sound-gen3";
-			reg =	<0 0xec500000 0 0x1000>, /* SCU */
-				<0 0xec5a0000 0 0x100>,  /* ADG */
-				<0 0xec540000 0 0x1000>, /* SSIU */
-				<0 0xec541000 0 0x280>,  /* SSI */
-				<0 0xec760000 0 0x200>;  /* Audio DMAC peri peri*/
+			compatible = "renesas,rcar_sound-r8a7796", "renesas,rcar_sound-gen3";
+			reg = <0 0xec500000 0 0x1000>, /* SCU */
+			      <0 0xec5a0000 0 0x100>,  /* ADG */
+			      <0 0xec540000 0 0x1000>, /* SSIU */
+			      <0 0xec541000 0 0x280>,  /* SSI */
+			      <0 0xec760000 0 0x200>;  /* Audio DMAC peri peri*/
 			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
 
 			clocks = <&cpg CPG_MOD 1005>,
@@ -2202,7 +2202,7 @@
 					dma-names = "rx", "tx";
 				};
 				ssiu40: ssiu-32 {
-					dmas =	<&audma0 0x71>, <&audma1 0x72>;
+					dmas = <&audma0 0x71>, <&audma1 0x72>;
 					dma-names = "rx", "tx";
 				};
 				ssiu41: ssiu-33 {
@@ -2284,6 +2284,18 @@
 			};
 		};
 
+		mlp: mlp@ec520000 {
+			compatible = "renesas,r8a7796-mlp",
+				     "renesas,rcar-gen3-mlp";
+			reg = <0 0xec520000 0 0x800>;
+			interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 802>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 802>;
+			status = "disabled";
+		};
+
 		audma0: dma-controller@ec700000 {
 			compatible = "renesas,dmac-r8a7796",
 				     "renesas,rcar-dmac";
diff --git a/arch/arm64/boot/dts/renesas/r8a77961.dtsi b/arch/arm64/boot/dts/renesas/r8a77961.dtsi
index ac9b587f6fc5..68cbbb322acf 100644
--- a/arch/arm64/boot/dts/renesas/r8a77961.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77961.dtsi
@@ -1734,7 +1734,7 @@
 			 * clkout	: #clock-cells = <0>;	<&rcar_sound>;
 			 * clkout0/1/2/3: #clock-cells = <1>;	<&rcar_sound N>;
 			 */
-			compatible =  "renesas,rcar_sound-r8a77961", "renesas,rcar_sound-gen3";
+			compatible = "renesas,rcar_sound-r8a77961", "renesas,rcar_sound-gen3";
 			reg = <0 0xec500000 0 0x1000>, /* SCU */
 			      <0 0xec5a0000 0 0x100>,  /* ADG */
 			      <0 0xec540000 0 0x1000>, /* SSIU */
@@ -2046,7 +2046,7 @@
 					dma-names = "rx", "tx";
 				};
 				ssiu40: ssiu-32 {
-					dmas =	<&audma0 0x71>, <&audma1 0x72>;
+					dmas = <&audma0 0x71>, <&audma1 0x72>;
 					dma-names = "rx", "tx";
 				};
 				ssiu41: ssiu-33 {
@@ -2128,6 +2128,18 @@
 			};
 		};
 
+		mlp: mlp@ec520000 {
+			compatible = "renesas,r8a77961-mlp",
+				     "renesas,rcar-gen3-mlp";
+			reg = <0 0xec520000 0 0x800>;
+			interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 802>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 802>;
+			status = "disabled";
+		};
+
 		audma0: dma-controller@ec700000 {
 			compatible = "renesas,dmac-r8a77961",
 				     "renesas,rcar-dmac";
@@ -2722,6 +2734,33 @@
 				port@2 {
 					reg = <2>;
 					du_out_lvds0: endpoint {
+						remote-endpoint = <&lvds0_in>;
+					};
+				};
+			};
+		};
+
+		lvds0: lvds@feb90000 {
+			compatible = "renesas,r8a77961-lvds";
+			reg = <0 0xfeb90000 0 0x14>;
+			clocks = <&cpg CPG_MOD 727>;
+			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
+			resets = <&cpg 727>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds0_in: endpoint {
+						remote-endpoint = <&du_out_lvds0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					lvds0_out: endpoint {
 					};
 				};
 			};
diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
index f898aad72b9d..9f858af8b762 100644
--- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
@@ -1753,12 +1753,12 @@
 			 * clkout	: #clock-cells = <0>;	<&rcar_sound>;
 			 * clkout0/1/2/3: #clock-cells = <1>;	<&rcar_sound N>;
 			 */
-			compatible =  "renesas,rcar_sound-r8a77965", "renesas,rcar_sound-gen3";
-			reg =	<0 0xec500000 0 0x1000>, /* SCU */
-				<0 0xec5a0000 0 0x100>,  /* ADG */
-				<0 0xec540000 0 0x1000>, /* SSIU */
-				<0 0xec541000 0 0x280>,  /* SSI */
-				<0 0xec760000 0 0x200>;  /* Audio DMAC peri peri*/
+			compatible = "renesas,rcar_sound-r8a77965", "renesas,rcar_sound-gen3";
+			reg = <0 0xec500000 0 0x1000>, /* SCU */
+			      <0 0xec5a0000 0 0x100>,  /* ADG */
+			      <0 0xec540000 0 0x1000>, /* SSIU */
+			      <0 0xec541000 0 0x280>,  /* SSI */
+			      <0 0xec760000 0 0x200>;  /* Audio DMAC peri peri*/
 			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
 
 			clocks = <&cpg CPG_MOD 1005>,
@@ -2012,7 +2012,7 @@
 					dma-names = "rx", "tx";
 				};
 				ssiu40: ssiu-32 {
-					dmas =	<&audma0 0x71>, <&audma1 0x72>;
+					dmas = <&audma0 0x71>, <&audma1 0x72>;
 					dma-names = "rx", "tx";
 				};
 				ssiu41: ssiu-33 {
@@ -2147,6 +2147,18 @@
 			};
 		};
 
+		mlp: mlp@ec520000 {
+			compatible = "renesas,r8a77965-mlp",
+				     "renesas,rcar-gen3-mlp";
+			reg = <0 0xec520000 0 0x800>;
+			interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 802>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 802>;
+			status = "disabled";
+		};
+
 		audma0: dma-controller@ec700000 {
 			compatible = "renesas,dmac-r8a77965",
 				     "renesas,rcar-dmac";
diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
index b579d3189a93..49d1a929aef7 100644
--- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
@@ -113,6 +113,20 @@
 	};
 };
 
+&csi40 {
+	status = "okay";
+
+	ports {
+		port@0 {
+			csi40_in: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&max9286_out0>;
+			};
+		};
+	};
+};
+
 &du {
 	clocks = <&cpg CPG_MOD 724>, <&x1_clk>;
 	clock-names = "du.0", "dclkin.0";
@@ -172,6 +186,89 @@
 	};
 };
 
+&i2c3 {
+	pinctrl-0 = <&i2c3_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	gmsl0: gmsl-deserializer@48 {
+		compatible = "maxim,max9286";
+		reg = <0x48>;
+
+		maxim,gpio-poc = <0 GPIO_ACTIVE_LOW>;
+		enable-gpios = <&io_expander 0 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+			};
+
+			port@1 {
+				reg = <1>;
+			};
+
+			port@2 {
+				reg = <2>;
+			};
+
+			port@3 {
+				reg = <3>;
+			};
+
+			port@4 {
+				reg = <4>;
+				max9286_out0: endpoint {
+					clock-lanes = <0>;
+					data-lanes = <1 2 3 4>;
+					remote-endpoint = <&csi40_in>;
+				};
+			};
+		};
+
+		i2c-mux {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2c@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+
+				status = "disabled";
+			};
+
+			i2c@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;
+
+				status = "disabled";
+			};
+
+			i2c@2 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <2>;
+
+				status = "disabled";
+			};
+
+			i2c@3 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <3>;
+
+				status = "disabled";
+			};
+		};
+	};
+};
+
 &lvds0 {
 	status = "okay";
 
@@ -200,6 +297,11 @@
 		function = "i2c0";
 	};
 
+	i2c3_pins: i2c3 {
+		groups = "i2c3_a";
+		function = "i2c3";
+	};
+
 	qspi0_pins: qspi0 {
 		groups = "qspi0_ctrl", "qspi0_data4";
 		function = "qspi0";
diff --git a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
index 3d6d10c82f48..43ed033eb512 100644
--- a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
@@ -108,6 +108,34 @@
 	};
 };
 
+&csi40 {
+	status = "okay";
+
+	ports {
+		port@0 {
+			csi40_in: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&max9286_out0>;
+			};
+		};
+	};
+};
+
+&csi41 {
+	status = "okay";
+
+	ports {
+		port@0 {
+			csi41_in: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&max9286_out1>;
+			};
+		};
+	};
+};
+
 &du {
 	clocks = <&cpg CPG_MOD 724>,
 		 <&x1_clk>;
@@ -200,6 +228,164 @@
 	};
 };
 
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	gmsl0: gmsl-deserializer@48 {
+		compatible = "maxim,max9286";
+		reg = <0x48>;
+
+		maxim,gpio-poc = <0 GPIO_ACTIVE_LOW>;
+		enable-gpios = <&io_expander0 0 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+			};
+
+			port@1 {
+				reg = <1>;
+			};
+
+			port@2 {
+				reg = <2>;
+			};
+
+			port@3 {
+				reg = <3>;
+			};
+
+			port@4 {
+				reg = <4>;
+				max9286_out0: endpoint {
+					clock-lanes = <0>;
+					data-lanes = <1 2 3 4>;
+					remote-endpoint = <&csi40_in>;
+				};
+			};
+		};
+
+		i2c-mux {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2c@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+
+				status = "disabled";
+			};
+
+			i2c@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;
+
+				status = "disabled";
+			};
+
+			i2c@2 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <2>;
+
+				status = "disabled";
+			};
+
+			i2c@3 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <3>;
+
+				status = "disabled";
+			};
+		};
+	};
+
+	gmsl1: gmsl-deserializer@4a {
+		compatible = "maxim,max9286";
+		reg = <0x4a>;
+
+		maxim,gpio-poc = <0 GPIO_ACTIVE_LOW>;
+		enable-gpios = <&io_expander1 0 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+			};
+
+			port@1 {
+				reg = <1>;
+			};
+
+			port@2 {
+				reg = <2>;
+			};
+
+			port@3 {
+				reg = <3>;
+			};
+
+			port@4 {
+				reg = <4>;
+				max9286_out1: endpoint {
+					clock-lanes = <0>;
+					data-lanes = <1 2 3 4>;
+					remote-endpoint = <&csi41_in>;
+				};
+			};
+		};
+
+		i2c-mux {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			i2c@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+
+				status = "disabled";
+			};
+
+			i2c@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <1>;
+
+				status = "disabled";
+			};
+
+			i2c@2 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <2>;
+
+				status = "disabled";
+			};
+
+			i2c@3 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <3>;
+
+				status = "disabled";
+			};
+		};
+	};
+};
+
 &lvds0 {
 	status = "okay";
 
@@ -256,6 +442,11 @@
 		function = "i2c0";
 	};
 
+	i2c1_pins: i2c1 {
+		groups = "i2c1";
+		function = "i2c1";
+	};
+
 	mmc_pins: mmc {
 		groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
 		function = "mmc";
diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
index 14caedd0c959..7e0f1aab2135 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
@@ -1489,12 +1489,12 @@
 			 * clkout	: #clock-cells = <0>;	<&rcar_sound>;
 			 * clkout0/1/2/3: #clock-cells = <1>;	<&rcar_sound N>;
 			 */
-			compatible =  "renesas,rcar_sound-r8a77990", "renesas,rcar_sound-gen3";
-			reg =	<0 0xec500000 0 0x1000>, /* SCU */
-				<0 0xec5a0000 0 0x100>,  /* ADG */
-				<0 0xec540000 0 0x1000>, /* SSIU */
-				<0 0xec541000 0 0x280>,  /* SSI */
-				<0 0xec760000 0 0x200>;  /* Audio DMAC peri peri*/
+			compatible = "renesas,rcar_sound-r8a77990", "renesas,rcar_sound-gen3";
+			reg = <0 0xec500000 0 0x1000>, /* SCU */
+			      <0 0xec5a0000 0 0x100>,  /* ADG */
+			      <0 0xec540000 0 0x1000>, /* SSIU */
+			      <0 0xec541000 0 0x280>,  /* SSI */
+			      <0 0xec760000 0 0x200>;  /* Audio DMAC peri peri*/
 			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
 
 			clocks = <&cpg CPG_MOD 1005>,
@@ -1682,6 +1682,18 @@
 			};
 		};
 
+		mlp: mlp@ec520000 {
+			compatible = "renesas,r8a77990-mlp",
+				     "renesas,rcar-gen3-mlp";
+			reg = <0 0xec520000 0 0x800>;
+			interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 802>;
+			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
+			resets = <&cpg 802>;
+			status = "disabled";
+		};
+
 		audma0: dma-controller@ec700000 {
 			compatible = "renesas,dmac-r8a77990",
 				     "renesas,rcar-dmac";
diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
index f29f3982a492..cac1f9467ffa 100644
--- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
@@ -1046,12 +1046,12 @@
 			 * clkout	: #clock-cells = <0>;	<&rcar_sound>;
 			 * clkout0/1/2/3: #clock-cells = <1>;	<&rcar_sound N>;
 			 */
-			compatible =  "renesas,rcar_sound-r8a77995", "renesas,rcar_sound-gen3";
-			reg =	<0 0xec500000 0 0x1000>, /* SCU */
-				<0 0xec5a0000 0 0x100>,  /* ADG */
-				<0 0xec540000 0 0x1000>, /* SSIU */
-				<0 0xec541000 0 0x280>,  /* SSI */
-				<0 0xec740000 0 0x200>;  /* Audio DMAC peri peri*/
+			compatible = "renesas,rcar_sound-r8a77995", "renesas,rcar_sound-gen3";
+			reg = <0 0xec500000 0 0x1000>, /* SCU */
+			      <0 0xec5a0000 0 0x100>,  /* ADG */
+			      <0 0xec540000 0 0x1000>, /* SSIU */
+			      <0 0xec541000 0 0x280>,  /* SSI */
+			      <0 0xec740000 0 0x200>;  /* Audio DMAC peri peri*/
 			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
 
 			clocks = <&cpg CPG_MOD 1005>,
@@ -1132,6 +1132,18 @@
 			};
 		};
 
+		mlp: mlp@ec520000 {
+			compatible = "renesas,r8a77995-mlp",
+				     "renesas,rcar-gen3-mlp";
+			reg = <0 0xec520000 0 0x800>;
+			interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 802>;
+			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+			resets = <&cpg 802>;
+			status = "disabled";
+		};
+
 		audma0: dma-controller@ec700000 {
 			compatible = "renesas,dmac-r8a77995",
 				     "renesas,rcar-dmac";
diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-csi-dsi.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-csi-dsi.dtsi
index f791c76f1bcf..e06b8eda85e1 100644
--- a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-csi-dsi.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-csi-dsi.dtsi
@@ -5,6 +5,63 @@
  * Copyright (C) 2021 Glider bv
  */
 
+&csi40 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			csi40_in: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&max96712_out0>;
+			};
+		};
+	};
+};
+
+&csi42 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			csi42_in: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&max96712_out1>;
+			};
+		};
+	};
+};
+
+&csi43 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			csi43_in: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&max96712_out2>;
+			};
+		};
+	};
+};
+
 &i2c0 {
 	pca9654_a: gpio@21 {
 		compatible = "onnn,pca9654";
@@ -34,3 +91,175 @@
 		pagesize = <8>;
 	};
 };
+
+&i2c1 {
+	gmsl0: gmsl-deserializer@49 {
+		compatible = "maxim,max96712";
+		reg = <0x49>;
+		enable-gpios = <&pca9654_a 0 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@4 {
+				reg = <4>;
+				max96712_out0: endpoint {
+					clock-lanes = <0>;
+					data-lanes = <1 2 3 4>;
+					remote-endpoint = <&csi40_in>;
+				};
+			};
+		};
+	};
+
+	gmsl1: gmsl-deserializer@4b {
+		compatible = "maxim,max96712";
+		reg = <0x4b>;
+		enable-gpios = <&pca9654_b 0 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@4 {
+				reg = <4>;
+				max96712_out1: endpoint {
+					clock-lanes = <0>;
+					data-lanes = <1 2 3 4>;
+					lane-polarities = <0 0 0 0 1>;
+					remote-endpoint = <&csi42_in>;
+				};
+			};
+		};
+	};
+
+	gmsl2: gmsl-deserializer@6b {
+		compatible = "maxim,max96712";
+		reg = <0x6b>;
+		enable-gpios = <&pca9654_c 0 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@4 {
+				reg = <4>;
+				max96712_out2: endpoint {
+					clock-lanes = <0>;
+					data-lanes = <1 2 3 4>;
+					lane-polarities = <0 0 0 0 1>;
+					remote-endpoint = <&csi43_in>;
+				};
+			};
+		};
+	};
+};
+
+&isp0 {
+	status = "okay";
+};
+
+&isp2 {
+	status = "okay";
+};
+
+&isp3 {
+	status = "okay";
+};
+
+&vin00 {
+	status = "okay";
+};
+
+&vin01 {
+	status = "okay";
+};
+
+&vin02 {
+	status = "okay";
+};
+
+&vin03 {
+	status = "okay";
+};
+
+&vin04 {
+	status = "okay";
+};
+
+&vin05 {
+	status = "okay";
+};
+
+&vin06 {
+	status = "okay";
+};
+
+&vin07 {
+	status = "okay";
+};
+
+&vin16 {
+	status = "okay";
+};
+
+&vin17 {
+	status = "okay";
+};
+
+&vin18 {
+	status = "okay";
+};
+
+&vin19 {
+	status = "okay";
+};
+
+&vin20 {
+	status = "okay";
+};
+
+&vin21 {
+	status = "okay";
+};
+
+&vin22 {
+	status = "okay";
+};
+
+&vin23 {
+	status = "okay";
+};
+
+&vin24 {
+	status = "okay";
+};
+
+&vin25 {
+	status = "okay";
+};
+
+&vin26 {
+	status = "okay";
+};
+
+&vin27 {
+	status = "okay";
+};
+
+&vin28 {
+	status = "okay";
+};
+
+&vin29 {
+	status = "okay";
+};
+
+&vin30 {
+	status = "okay";
+};
+
+&vin31 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
index 1e7ed12ebc87..c4be288b1912 100644
--- a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
@@ -102,7 +102,7 @@
 			interrupts = <GIC_SPI 832 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 916>;
 			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
-			resets =  <&cpg 916>;
+			resets = <&cpg 916>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-ranges = <&pfc 0 0 28>;
@@ -116,7 +116,7 @@
 			interrupts = <GIC_SPI 836 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 915>;
 			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
-			resets =  <&cpg 915>;
+			resets = <&cpg 915>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-ranges = <&pfc 0 32 31>;
@@ -130,7 +130,7 @@
 			interrupts = <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 915>;
 			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
-			resets =  <&cpg 915>;
+			resets = <&cpg 915>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-ranges = <&pfc 0 64 25>;
@@ -144,7 +144,7 @@
 			interrupts = <GIC_SPI 844 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 916>;
 			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
-			resets =  <&cpg 916>;
+			resets = <&cpg 916>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-ranges = <&pfc 0 96 17>;
@@ -158,7 +158,7 @@
 			interrupts = <GIC_SPI 848 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 917>;
 			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
-			resets =  <&cpg 917>;
+			resets = <&cpg 917>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-ranges = <&pfc 0 128 27>;
@@ -172,7 +172,7 @@
 			interrupts = <GIC_SPI 852 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 917>;
 			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
-			resets =  <&cpg 917>;
+			resets = <&cpg 917>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-ranges = <&pfc 0 160 21>;
@@ -186,7 +186,7 @@
 			interrupts = <GIC_SPI 856 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 918>;
 			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
-			resets =  <&cpg 918>;
+			resets = <&cpg 918>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-ranges = <&pfc 0 192 21>;
@@ -200,7 +200,7 @@
 			interrupts = <GIC_SPI 860 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 918>;
 			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
-			resets =  <&cpg 918>;
+			resets = <&cpg 918>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-ranges = <&pfc 0 224 21>;
@@ -214,7 +214,7 @@
 			interrupts = <GIC_SPI 864 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 918>;
 			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
-			resets =  <&cpg 918>;
+			resets = <&cpg 918>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-ranges = <&pfc 0 256 21>;
@@ -228,7 +228,7 @@
 			interrupts = <GIC_SPI 868 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 918>;
 			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
-			resets =  <&cpg 918>;
+			resets = <&cpg 918>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			gpio-ranges = <&pfc 0 288 21>;
@@ -340,6 +340,21 @@
 			#thermal-sensor-cells = <1>;
 		};
 
+		intc_ex: interrupt-controller@e61c0000 {
+			compatible = "renesas,intc-ex-r8a779a0", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_CORE R8A779A0_CLK_CP>;
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+		};
+
 		tmu0: timer@e61e0000 {
 			compatible = "renesas,tmu-r8a779a0", "renesas,tmu";
 			reg = <0 0xe61e0000 0 0x30>;
diff --git a/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi
index 156586532c84..6e07c54148e7 100644
--- a/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779f0-spider-cpu.dtsi
@@ -31,6 +31,34 @@
 	clock-frequency = <32768>;
 };
 
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	scif3_pins: scif3 {
+		groups = "scif3_data", "scif3_ctrl";
+		function = "scif3";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk";
+		function = "scif_clk";
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
 &scif3 {
+	pinctrl-0 = <&scif3_pins>;
+	pinctrl-names = "default";
+
+	uart-has-rtscts;
 	status = "okay";
 };
+
+&scif_clk {
+	clock-frequency = <24000000>;
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779f0.dtsi b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi
index eda597766eaf..f4e549867371 100644
--- a/arch/arm64/boot/dts/renesas/r8a779f0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779f0.dtsi
@@ -59,6 +59,22 @@
 		#size-cells = <2>;
 		ranges;
 
+		rwdt: watchdog@e6020000 {
+			compatible = "renesas,r8a779f0-wdt",
+				     "renesas,rcar-gen4-wdt";
+			reg = <0 0xe6020000 0 0x0c>;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+			status = "disabled";
+		};
+
+		pfc: pinctrl@e6050000 {
+			compatible = "renesas,pfc-r8a779f0";
+			reg = <0 0xe6050000 0 0x16c>, <0 0xe6050800 0 0x16c>,
+			      <0 0xe6051000 0 0x16c>, <0 0xe6051800 0 0x16c>;
+		};
+
 		cpg: clock-controller@e6150000 {
 			compatible = "renesas,r8a779f0-cpg-mssr";
 			reg = <0 0xe6150000 0 0x4000>;
@@ -94,6 +110,76 @@
 			status = "disabled";
 		};
 
+		dmac0: dma-controller@e7350000 {
+			compatible = "renesas,dmac-r8a779f0",
+				     "renesas,rcar-gen4-dmac";
+			reg = <0 0xe7350000 0 0x1000>,
+			      <0 0xe7300000 0 0x10000>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3", "ch4",
+					  "ch5", "ch6", "ch7", "ch8", "ch9",
+					  "ch10", "ch11", "ch12", "ch13",
+					  "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 709>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 709>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+		};
+
+		dmac1: dma-controller@e7351000 {
+			compatible = "renesas,dmac-r8a779f0",
+				     "renesas,rcar-gen4-dmac";
+			reg = <0 0xe7351000 0 0x1000>,
+			      <0 0xe7310000 0 0x10000>;
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3", "ch4",
+					  "ch5", "ch6", "ch7", "ch8", "ch9",
+					  "ch10", "ch11", "ch12", "ch13",
+					  "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 710>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A779F0_PD_ALWAYS_ON>;
+			resets = <&cpg 710>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+		};
+
 		gic: interrupt-controller@f1000000 {
 			compatible = "arm,gic-v3";
 			#interrupt-cells = <3>;
diff --git a/arch/arm64/boot/dts/renesas/r9a07g044c1.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044c1.dtsi
new file mode 100644
index 000000000000..1d57df706939
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g044c1.dtsi
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2LC R9A07G044C1 SoC specific parts
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r9a07g044.dtsi"
+
+/ {
+	compatible = "renesas,r9a07g044c1", "renesas,r9a07g044";
+
+	cpus {
+		/delete-node/ cpu-map;
+		/delete-node/ cpu@100;
+	};
+
+	timer {
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
+
+&soc {
+	/delete-node/ ssi@1004a800;
+	/delete-node/ serial@1004c800;
+	/delete-node/ adc@10059000;
+	/delete-node/ ethernet@11c30000;
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts b/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts
new file mode 100644
index 000000000000..5a5cea82a5d9
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g044c2-smarc.dts
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2LC SMARC EVK board
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r9a07g044c2.dtsi"
+#include "rzg2lc-smarc.dtsi"
+
+/ {
+	model = "Renesas SMARC EVK based on r9a07g044c2";
+	compatible = "renesas,smarc-evk", "renesas,r9a07g044c2", "renesas,r9a07g044";
+};
+
+&ehci0 {
+	/delete-property/ pinctrl-0;
+	/delete-property/ pinctrl-names;
+	status = "disabled";
+};
+
+&ehci1 {
+	/delete-property/ pinctrl-0;
+	/delete-property/ pinctrl-names;
+	status = "disabled";
+};
+
+&hsusb {
+	/delete-property/ pinctrl-0;
+	/delete-property/ pinctrl-names;
+	status = "disabled";
+};
+
+&i2c0 {
+	/delete-property/ pinctrl-0;
+	/delete-property/ pinctrl-names;
+	status = "disabled";
+};
+
+&i2c1 {
+	/delete-property/ pinctrl-0;
+	/delete-property/ pinctrl-names;
+	status = "disabled";
+};
+
+&i2c3 {
+	/delete-property/ pinctrl-0;
+	/delete-property/ pinctrl-names;
+	status = "disabled";
+};
+
+&ohci0 {
+	/delete-property/ pinctrl-0;
+	/delete-property/ pinctrl-names;
+	status = "disabled";
+};
+
+&ohci1 {
+	/delete-property/ pinctrl-0;
+	/delete-property/ pinctrl-names;
+	status = "disabled";
+};
+
+&phyrst {
+	status = "disabled";
+};
+
+&spi1 {
+	/delete-property/ pinctrl-0;
+	/delete-property/ pinctrl-names;
+	status = "disabled";
+};
+
+&ssi0 {
+	/delete-property/ pinctrl-0;
+	/delete-property/ pinctrl-names;
+	status = "disabled";
+};
+
+&usb2_phy0 {
+	/delete-property/ pinctrl-0;
+	/delete-property/ pinctrl-names;
+	status = "disabled";
+};
+
+&usb2_phy1 {
+	/delete-property/ pinctrl-0;
+	/delete-property/ pinctrl-names;
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g044c2.dtsi b/arch/arm64/boot/dts/renesas/r9a07g044c2.dtsi
new file mode 100644
index 000000000000..7bb8917fe421
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g044c2.dtsi
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2LC R9A07G044C2 SoC specific parts
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r9a07g044.dtsi"
+
+/ {
+	compatible = "renesas,r9a07g044c2", "renesas,r9a07g044";
+};
+
+&soc {
+	/delete-node/ ssi@1004a800;
+	/delete-node/ serial@1004c800;
+	/delete-node/ adc@10059000;
+	/delete-node/ ethernet@11c30000;
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts b/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts
index 247b0b3f1b58..bc2af6c92ccd 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts
+++ b/arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts
@@ -8,6 +8,8 @@
 /dts-v1/;
 #include "r9a07g044l2.dtsi"
 #include "rzg2l-smarc-som.dtsi"
+#include "rzg2l-smarc-pinfunction.dtsi"
+#include "rz-smarc-common.dtsi"
 #include "rzg2l-smarc.dtsi"
 
 / {
diff --git a/arch/arm64/boot/dts/renesas/r9a07g054.dtsi b/arch/arm64/boot/dts/renesas/r9a07g054.dtsi
new file mode 100644
index 000000000000..5d39e765c291
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g054.dtsi
@@ -0,0 +1,491 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/V2L SoC
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/r9a07g054-cpg.h>
+
+/ {
+	compatible = "renesas,r9a07g054";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	audio_clk1: audio_clk1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by boards that provide it */
+		clock-frequency = <0>;
+	};
+
+	audio_clk2: audio_clk2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by boards that provide it */
+		clock-frequency = <0>;
+	};
+
+	/* External CAN clock - to be overridden by boards that provide it */
+	can_clk: can {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <0>;
+	};
+
+	/* clock can be either from exclk or crystal oscillator (XIN/XOUT) */
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a55";
+			reg = <0>;
+			device_type = "cpu";
+			#cooling-cells = <2>;
+			next-level-cache = <&L3_CA55>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R9A07G054_CLK_I>;
+		};
+
+		cpu1: cpu@100 {
+			compatible = "arm,cortex-a55";
+			reg = <0x100>;
+			device_type = "cpu";
+			next-level-cache = <&L3_CA55>;
+			enable-method = "psci";
+			clocks = <&cpg CPG_CORE R9A07G054_CLK_I>;
+		};
+
+		L3_CA55: cache-controller-0 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x40000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ssi0: ssi@10049c00 {
+			reg = <0 0x10049c00 0 0x400>;
+			#sound-dai-cells = <0>;
+			/* place holder */
+		};
+
+		spi1: spi@1004b000 {
+			reg = <0 0x1004b000 0 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			/* place holder */
+		};
+
+		scif0: serial@1004b800 {
+			compatible = "renesas,scif-r9a07g054",
+				     "renesas,scif-r9a07g044";
+			reg = <0 0x1004b800 0 0x400>;
+			interrupts = <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD R9A07G054_SCIF0_CLK_PCK>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G054_SCIF0_RST_SYSTEM_N>;
+			status = "disabled";
+		};
+
+		scif1: serial@1004bc00 {
+			compatible = "renesas,scif-r9a07g054",
+				     "renesas,scif-r9a07g044";
+			reg = <0 0x1004bc00 0 0x400>;
+			interrupts = <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 388 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD R9A07G054_SCIF1_CLK_PCK>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G054_SCIF1_RST_SYSTEM_N>;
+			status = "disabled";
+		};
+
+		scif2: serial@1004c000 {
+			compatible = "renesas,scif-r9a07g054",
+				     "renesas,scif-r9a07g044";
+			reg = <0 0x1004c000 0 0x400>;
+			interrupts = <GIC_SPI 390 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD R9A07G054_SCIF2_CLK_PCK>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G054_SCIF2_RST_SYSTEM_N>;
+			status = "disabled";
+		};
+
+		scif3: serial@1004c400 {
+			compatible = "renesas,scif-r9a07g054",
+				     "renesas,scif-r9a07g044";
+			reg = <0 0x1004c400 0 0x400>;
+			interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD R9A07G054_SCIF3_CLK_PCK>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G054_SCIF3_RST_SYSTEM_N>;
+			status = "disabled";
+		};
+
+		scif4: serial@1004c800 {
+			compatible = "renesas,scif-r9a07g054",
+				     "renesas,scif-r9a07g044";
+			reg = <0 0x1004c800 0 0x400>;
+			interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi",
+					  "bri", "dri", "tei";
+			clocks = <&cpg CPG_MOD R9A07G054_SCIF4_CLK_PCK>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G054_SCIF4_RST_SYSTEM_N>;
+			status = "disabled";
+		};
+
+		sci0: serial@1004d000 {
+			compatible = "renesas,r9a07g054-sci", "renesas,sci";
+			reg = <0 0x1004d000 0 0x400>;
+			interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi", "tei";
+			clocks = <&cpg CPG_MOD R9A07G054_SCI0_CLKP>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G054_SCI0_RST>;
+			status = "disabled";
+		};
+
+		sci1: serial@1004d400 {
+			compatible = "renesas,r9a07g054-sci", "renesas,sci";
+			reg = <0 0x1004d400 0 0x400>;
+			interrupts = <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi", "tei";
+			clocks = <&cpg CPG_MOD R9A07G054_SCI1_CLKP>;
+			clock-names = "fck";
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G054_SCI1_RST>;
+			status = "disabled";
+		};
+
+		canfd: can@10050000 {
+			reg = <0 0x10050000 0 0x8000>;
+			/* place holder */
+		};
+
+		i2c0: i2c@10058000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x10058000 0 0x400>;
+			/* place holder */
+		};
+
+		i2c1: i2c@10058400 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x10058400 0 0x400>;
+			/* place holder */
+		};
+
+		i2c3: i2c@10058c00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x10058c00 0 0x400>;
+			/* place holder */
+		};
+
+		adc: adc@10059000 {
+			reg = <0 0x10059000 0 0x400>;
+			/* place holder */
+		};
+
+		sbc: spi@10060000 {
+			reg = <0 0x10060000 0 0x10000>,
+			      <0 0x20000000 0 0x10000000>,
+			      <0 0x10070000 0 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			/* place holder */
+		};
+
+		cpg: clock-controller@11010000 {
+			compatible = "renesas,r9a07g054-cpg";
+			reg = <0 0x11010000 0 0x10000>;
+			clocks = <&extal_clk>;
+			clock-names = "extal";
+			#clock-cells = <2>;
+			#reset-cells = <1>;
+			#power-domain-cells = <0>;
+		};
+
+		sysc: system-controller@11020000 {
+			compatible = "renesas,r9a07g054-sysc";
+			reg = <0 0x11020000 0 0x10000>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "lpm_int", "ca55stbydone_int",
+					  "cm33stbyr_int", "ca55_deny";
+			status = "disabled";
+		};
+
+		pinctrl: pinctrl@11030000 {
+			compatible = "renesas,r9a07g054-pinctrl",
+				     "renesas,r9a07g044-pinctrl";
+			reg = <0 0x11030000 0 0x10000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 0 392>;
+			clocks = <&cpg CPG_MOD R9A07G054_GPIO_HCLK>;
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G054_GPIO_RSTN>,
+				 <&cpg R9A07G054_GPIO_PORT_RESETN>,
+				 <&cpg R9A07G054_GPIO_SPARE_RESETN>;
+		};
+
+		dmac: dma-controller@11820000 {
+			compatible = "renesas,r9a07g054-dmac",
+				     "renesas,rz-dmac";
+			reg = <0 0x11820000 0 0x10000>,
+			      <0 0x11830000 0 0x10000>;
+			interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 125 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 126 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 127 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 131 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 132 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 133 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 134 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 135 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 136 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 137 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 138 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 139 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD R9A07G054_DMAC_ACLK>,
+				 <&cpg CPG_MOD R9A07G054_DMAC_PCLK>;
+			power-domains = <&cpg>;
+			resets = <&cpg R9A07G054_DMAC_ARESETN>,
+				 <&cpg R9A07G054_DMAC_RST_ASYNC>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+		};
+
+		gpu: gpu@11840000 {
+			reg = <0x0 0x11840000 0x0 0x10000>;
+			/* place holder */
+		};
+
+		gic: interrupt-controller@11900000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x0 0x11900000 0 0x40000>,
+			      <0x0 0x11940000 0 0x60000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+		};
+
+		sdhi0: mmc@11c00000  {
+			reg = <0x0 0x11c00000 0 0x10000>;
+			/* place holder */
+		};
+
+		sdhi1: mmc@11c10000 {
+			reg = <0x0 0x11c10000 0 0x10000>;
+			/* place holder */
+		};
+
+		eth0: ethernet@11c20000 {
+			compatible = "renesas,r9a07g054-gbeth",
+				     "renesas,rzg2l-gbeth";
+			reg = <0 0x11c20000 0 0x10000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mux", "fil", "arp_ns";
+			phy-mode = "rgmii";
+			clocks = <&cpg CPG_MOD R9A07G054_ETH0_CLK_AXI>,
+				 <&cpg CPG_MOD R9A07G054_ETH0_CLK_CHI>,
+				 <&cpg CPG_CORE R9A07G054_CLK_HP>;
+			clock-names = "axi", "chi", "refclk";
+			resets = <&cpg R9A07G054_ETH0_RST_HW_N>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		eth1: ethernet@11c30000 {
+			compatible = "renesas,r9a07g054-gbeth",
+				     "renesas,rzg2l-gbeth";
+			reg = <0 0x11c30000 0 0x10000>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "mux", "fil", "arp_ns";
+			phy-mode = "rgmii";
+			clocks = <&cpg CPG_MOD R9A07G054_ETH1_CLK_AXI>,
+				 <&cpg CPG_MOD R9A07G054_ETH1_CLK_CHI>,
+				 <&cpg CPG_CORE R9A07G054_CLK_HP>;
+			clock-names = "axi", "chi", "refclk";
+			resets = <&cpg R9A07G054_ETH1_RST_HW_N>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		phyrst: usbphy-ctrl@11c40000 {
+			reg = <0 0x11c40000 0 0x10000>;
+			/* place holder */
+		};
+
+		ohci0: usb@11c50000 {
+			reg = <0 0x11c50000 0 0x100>;
+			/* place holder */
+		};
+
+		ohci1: usb@11c70000 {
+			reg = <0 0x11c70000 0 0x100>;
+			/* place holder */
+		};
+
+		ehci0: usb@11c50100 {
+			reg = <0 0x11c50100 0 0x100>;
+			/* place holder */
+		};
+
+		ehci1: usb@11c70100 {
+			reg = <0 0x11c70100 0 0x100>;
+			/* place holder */
+		};
+
+		usb2_phy0: usb-phy@11c50200 {
+			reg = <0 0x11c50200 0 0x700>;
+			/* place holder */
+		};
+
+		usb2_phy1: usb-phy@11c70200 {
+			reg = <0 0x11c70200 0 0x700>;
+			/* place holder */
+		};
+
+		hsusb: usb@11c60000 {
+			reg = <0 0x11c60000 0 0x10000>;
+			/* place holder */
+		};
+
+		wdt0: watchdog@12800800 {
+			reg = <0 0x12800800 0 0x400>;
+			/* place holder */
+		};
+
+		wdt1: watchdog@12800c00 {
+			reg = <0 0x12800C00 0 0x400>;
+			/* place holder */
+		};
+
+		wdt2: watchdog@12800400 {
+			reg = <0 0x12800400 0 0x400>;
+			/* place holder */
+		};
+
+		ostm0: timer@12801000 {
+			reg = <0x0 0x12801000 0x0 0x400>;
+			/* place holder */
+		};
+
+		ostm1: timer@12801400 {
+			reg = <0x0 0x12801400 0x0 0x400>;
+			/* place holder */
+		};
+
+		ostm2: timer@12801800 {
+			reg = <0x0 0x12801800 0x0 0x400>;
+			/* place holder */
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g054l1.dtsi b/arch/arm64/boot/dts/renesas/r9a07g054l1.dtsi
new file mode 100644
index 000000000000..c448cc6634c1
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g054l1.dtsi
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/V2L R9A07G054L1 SoC specific parts
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r9a07g054.dtsi"
+
+/ {
+	compatible = "renesas,r9a07g054l1", "renesas,r9a07g054";
+
+	cpus {
+		/delete-node/ cpu-map;
+		/delete-node/ cpu@100;
+	};
+
+	timer {
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts b/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts
new file mode 100644
index 000000000000..fc334b4c2aa4
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2L SMARC EVK board
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r9a07g054l2.dtsi"
+#include "rzg2l-smarc-som.dtsi"
+#include "rzg2l-smarc-pinfunction.dtsi"
+#include "rz-smarc-common.dtsi"
+#include "rzg2l-smarc.dtsi"
+
+/ {
+	model = "Renesas SMARC EVK based on r9a07g054l2";
+	compatible = "renesas,smarc-evk", "renesas,r9a07g054l2", "renesas,r9a07g054";
+};
+
+&pinctrl {
+	/delete-node/ can0-stb-hog;
+	/delete-node/ can1-stb-hog;
+	/delete-node/ gpio-sd0-pwr-en-hog;
+	/delete-node/ sd0-dev-sel-hog;
+	/delete-node/ sd1-pwr-en-hog;
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a07g054l2.dtsi b/arch/arm64/boot/dts/renesas/r9a07g054l2.dtsi
new file mode 100644
index 000000000000..4d5914bc95d3
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a07g054l2.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/V2L R9A07G054L2 SoC specific parts
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r9a07g054.dtsi"
+
+/ {
+	compatible = "renesas,r9a07g054l2", "renesas,r9a07g054";
+};
diff --git a/arch/arm64/boot/dts/renesas/rz-smarc-common.dtsi b/arch/arm64/boot/dts/renesas/rz-smarc-common.dtsi
new file mode 100644
index 000000000000..588117aafaca
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/rz-smarc-common.dtsi
@@ -0,0 +1,207 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/{G2L,G2LC,V2L} SMARC EVK common parts
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+
+/*
+ * SSI-WM8978
+ *
+ * This command is required when Playback/Capture
+ *
+ *	amixer cset name='Left Input Mixer L2 Switch' on
+ *	amixer cset name='Right Input Mixer R2 Switch' on
+ *	amixer cset name='Headphone Playback Volume' 100
+ *	amixer cset name='PCM Volume' 100%
+ *	amixer cset name='Input PGA Volume' 25
+ *
+ */
+
+/ {
+	aliases {
+		serial0 = &scif0;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c3 = &i2c3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	audio_mclock: audio_mclock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <11289600>;
+	};
+
+	snd_rzg2l: sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&cpu_dai>;
+		simple-audio-card,frame-master = <&cpu_dai>;
+		simple-audio-card,mclk-fs = <256>;
+
+		simple-audio-card,widgets = "Microphone", "Microphone Jack";
+		simple-audio-card,routing =
+			    "L2", "Mic Bias",
+			    "R2", "Mic Bias",
+			    "Mic Bias", "Microphone Jack";
+
+		cpu_dai: simple-audio-card,cpu {
+			sound-dai = <&ssi0>;
+		};
+
+		codec_dai: simple-audio-card,codec {
+			clocks = <&audio_mclock>;
+			sound-dai = <&wm8978>;
+		};
+	};
+
+	usb0_vbus_otg: regulator-usb0-vbus-otg {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB0_VBUS_OTG";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vccq_sdhi1: regulator-vccq-sdhi1 {
+		compatible = "regulator-gpio";
+		regulator-name = "SDHI1 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&pinctrl RZG2L_GPIO(39, 1) GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>, <1800000 0>;
+	};
+};
+
+&audio_clk1{
+	clock-frequency = <11289600>;
+};
+
+&audio_clk2{
+	clock-frequency = <12288000>;
+};
+
+&canfd {
+	pinctrl-0 = <&can0_pins &can1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	channel0 {
+		status = "okay";
+	};
+
+	channel1 {
+		status = "okay";
+	};
+};
+
+&ehci0 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&hsusb {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-0 = <&i2c3_pins>;
+	pinctrl-names = "default";
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	wm8978: codec@1a {
+		compatible = "wlf,wm8978";
+		#sound-dai-cells = <0>;
+		reg = <0x1a>;
+	};
+};
+
+&ohci0 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&phyrst {
+	status = "okay";
+};
+
+&scif0 {
+	pinctrl-0 = <&scif0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sdhi1 {
+	pinctrl-0 = <&sdhi1_pins>;
+	pinctrl-1 = <&sdhi1_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&vccq_sdhi1>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-0 = <&spi1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&ssi0 {
+	pinctrl-0 = <&ssi0_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&usb2_phy0 {
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+
+	vbus-supply = <&usb0_vbus_otg>;
+	status = "okay";
+};
+
+&usb2_phy1 {
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc-pinfunction.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc-pinfunction.dtsi
new file mode 100644
index 000000000000..9085d8c76ce1
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc-pinfunction.dtsi
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/{G2L,V2L} SMARC pincontrol parts
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+
+&pinctrl {
+	pinctrl-0 = <&sound_clk_pins>;
+	pinctrl-names = "default";
+
+	can0_pins: can0 {
+		pinmux = <RZG2L_PORT_PINMUX(10, 1, 2)>, /* TX */
+			 <RZG2L_PORT_PINMUX(11, 0, 2)>; /* RX */
+	};
+
+	/* SW7 should be at position 2->3 so that GPIO8_CAN0_STB line is activated */
+	can0-stb-hog {
+		gpio-hog;
+		gpios = <RZG2L_GPIO(42, 2) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "can0_stb";
+	};
+
+	can1_pins: can1 {
+		pinmux = <RZG2L_PORT_PINMUX(12, 1, 2)>, /* TX */
+			 <RZG2L_PORT_PINMUX(13, 0, 2)>; /* RX */
+	};
+
+	/* SW8 should be at position 2->3 so that GPIO9_CAN1_STB line is activated */
+	can1-stb-hog {
+		gpio-hog;
+		gpios = <RZG2L_GPIO(42, 3) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "can1_stb";
+	};
+
+	i2c0_pins: i2c0 {
+		pins = "RIIC0_SDA", "RIIC0_SCL";
+		input-enable;
+	};
+
+	i2c1_pins: i2c1 {
+		pins = "RIIC1_SDA", "RIIC1_SCL";
+		input-enable;
+	};
+
+	i2c3_pins: i2c3 {
+		pinmux = <RZG2L_PORT_PINMUX(18, 0, 3)>, /* SDA */
+			 <RZG2L_PORT_PINMUX(18, 1, 3)>; /* SCL */
+	};
+
+	scif0_pins: scif0 {
+		pinmux = <RZG2L_PORT_PINMUX(38, 0, 1)>,	/* TxD */
+			 <RZG2L_PORT_PINMUX(38, 1, 1)>;	/* RxD */
+	};
+
+	scif2_pins: scif2 {
+		pinmux = <RZG2L_PORT_PINMUX(48, 0, 1)>, /* TxD */
+			 <RZG2L_PORT_PINMUX(48, 1, 1)>, /* RxD */
+			 <RZG2L_PORT_PINMUX(48, 3, 1)>, /* CTS# */
+			 <RZG2L_PORT_PINMUX(48, 4, 1)>; /* RTS# */
+	};
+
+	sd1-pwr-en-hog {
+		gpio-hog;
+		gpios = <RZG2L_GPIO(39, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "sd1_pwr_en";
+	};
+
+	sdhi1_pins: sd1 {
+		sd1_data {
+			pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3";
+			power-source = <3300>;
+		};
+
+		sd1_ctrl {
+			pins = "SD1_CLK", "SD1_CMD";
+			power-source = <3300>;
+		};
+
+		sd1_mux {
+			pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>; /* SD1_CD */
+		};
+	};
+
+	sdhi1_pins_uhs: sd1_uhs {
+		sd1_data_uhs {
+			pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3";
+			power-source = <1800>;
+		};
+
+		sd1_ctrl_uhs {
+			pins = "SD1_CLK", "SD1_CMD";
+			power-source = <1800>;
+		};
+
+		sd1_mux_uhs {
+			pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>; /* SD1_CD */
+		};
+	};
+
+	sound_clk_pins: sound_clk {
+		pins = "AUDIO_CLK1", "AUDIO_CLK2";
+		input-enable;
+	};
+
+	spi1_pins: spi1 {
+		pinmux = <RZG2L_PORT_PINMUX(44, 0, 1)>, /* CK */
+			 <RZG2L_PORT_PINMUX(44, 1, 1)>, /* MOSI */
+			 <RZG2L_PORT_PINMUX(44, 2, 1)>, /* MISO */
+			 <RZG2L_PORT_PINMUX(44, 3, 1)>; /* SSL */
+	};
+
+	ssi0_pins: ssi0 {
+		pinmux = <RZG2L_PORT_PINMUX(45, 0, 1)>, /* BCK */
+			 <RZG2L_PORT_PINMUX(45, 1, 1)>, /* RCK */
+			 <RZG2L_PORT_PINMUX(45, 2, 1)>, /* TXD */
+			 <RZG2L_PORT_PINMUX(45, 3, 1)>; /* RXD */
+	};
+
+	usb0_pins: usb0 {
+		pinmux = <RZG2L_PORT_PINMUX(4, 0, 1)>, /* VBUS */
+			 <RZG2L_PORT_PINMUX(5, 0, 1)>, /* OVC */
+			 <RZG2L_PORT_PINMUX(5, 1, 1)>; /* OTG_ID */
+	};
+
+	usb1_pins: usb1 {
+		pinmux = <RZG2L_PORT_PINMUX(42, 0, 1)>, /* VBUS */
+			 <RZG2L_PORT_PINMUX(42, 1, 1)>; /* OVC */
+	};
+};
+
diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi
index 9112e79079a1..aeacd22e9eb0 100644
--- a/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 /*
- * Device Tree Source for the RZ/G2L SMARC SOM common parts
+ * Device Tree Source for the RZ/{G2L,V2L} SMARC SOM common parts
  *
  * Copyright (C) 2021 Renesas Electronics Corp.
  */
diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi
index 6f2a8bdfa225..33ddfd18bd56 100644
--- a/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 /*
- * Device Tree Source for the RZ/G2L SMARC EVK common parts
+ * Device Tree Source for the RZ/{G2L,V2L} SMARC EVK common parts
  *
  * Copyright (C) 2021 Renesas Electronics Corp.
  */
@@ -8,293 +8,15 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
 
-/*
- * SSI-WM8978
- *
- * This command is required when Playback/Capture
- *
- *	amixer cset name='Left Input Mixer L2 Switch' on
- *	amixer cset name='Right Input Mixer R2 Switch' on
- *	amixer cset name='Headphone Playback Volume' 100
- *	amixer cset name='PCM Volume' 100%
- *	amixer cset name='Input PGA Volume' 25
- *
- */
-
 /* comment the #define statement to disable SCIF2 (SER0) on PMOD1 (CN7) */
 #define PMOD1_SER0	1
 
 / {
 	aliases {
-		serial0 = &scif0;
 		serial1 = &scif2;
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		i2c3 = &i2c3;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	audio_mclock: audio_mclock {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <11289600>;
-	};
-
-	snd_rzg2l: sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&cpu_dai>;
-		simple-audio-card,frame-master = <&cpu_dai>;
-		simple-audio-card,mclk-fs = <256>;
-
-		simple-audio-card,widgets = "Microphone", "Microphone Jack";
-		simple-audio-card,routing =
-			    "L2", "Mic Bias",
-			    "R2", "Mic Bias",
-			    "Mic Bias", "Microphone Jack";
-
-		cpu_dai: simple-audio-card,cpu {
-			sound-dai = <&ssi0>;
-		};
-
-		codec_dai: simple-audio-card,codec {
-			clocks = <&audio_mclock>;
-			sound-dai = <&wm8978>;
-		};
-	};
-
-	usb0_vbus_otg: regulator-usb0-vbus-otg {
-		compatible = "regulator-fixed";
-
-		regulator-name = "USB0_VBUS_OTG";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
-	vccq_sdhi1: regulator-vccq-sdhi1 {
-		compatible = "regulator-gpio";
-		regulator-name = "SDHI1 VccQ";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-		gpios = <&pinctrl RZG2L_GPIO(39, 1) GPIO_ACTIVE_HIGH>;
-		gpios-states = <1>;
-		states = <3300000 1>, <1800000 0>;
-	};
-};
-
-&audio_clk1{
-	clock-frequency = <11289600>;
-};
-
-&audio_clk2{
-	clock-frequency = <12288000>;
-};
-
-&canfd {
-	pinctrl-0 = <&can0_pins &can1_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	channel0 {
-		status = "okay";
-	};
-
-	channel1 {
-		status = "okay";
-	};
-};
-
-&ehci0 {
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&ehci1 {
-	status = "okay";
-};
-
-&hsusb {
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-0 = <&i2c0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-0 = <&i2c1_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&i2c3 {
-	pinctrl-0 = <&i2c3_pins>;
-	pinctrl-names = "default";
-	clock-frequency = <400000>;
-
-	status = "okay";
-
-	wm8978: codec@1a {
-		compatible = "wlf,wm8978";
-		#sound-dai-cells = <0>;
-		reg = <0x1a>;
-	};
-};
-
-&ohci0 {
-	dr_mode = "otg";
-	status = "okay";
-};
-
-&ohci1 {
-	status = "okay";
-};
-
-&phyrst {
-	status = "okay";
-};
-
-&pinctrl {
-	pinctrl-0 = <&sound_clk_pins>;
-	pinctrl-names = "default";
-
-	can0_pins: can0 {
-		pinmux = <RZG2L_PORT_PINMUX(10, 1, 2)>, /* TX */
-			 <RZG2L_PORT_PINMUX(11, 0, 2)>; /* RX */
-	};
-
-	/* SW7 should be at position 2->3 so that GPIO8_CAN0_STB line is activated */
-	can0-stb {
-		gpio-hog;
-		gpios = <RZG2L_GPIO(42, 2) GPIO_ACTIVE_HIGH>;
-		output-low;
-		line-name = "can0_stb";
-	};
-
-	can1_pins: can1 {
-		pinmux = <RZG2L_PORT_PINMUX(12, 1, 2)>, /* TX */
-			 <RZG2L_PORT_PINMUX(13, 0, 2)>; /* RX */
-	};
-
-	/* SW8 should be at position 2->3 so that GPIO9_CAN1_STB line is activated */
-	can1-stb {
-		gpio-hog;
-		gpios = <RZG2L_GPIO(42, 3) GPIO_ACTIVE_HIGH>;
-		output-low;
-		line-name = "can1_stb";
-	};
-
-	i2c0_pins: i2c0 {
-		pins = "RIIC0_SDA", "RIIC0_SCL";
-		input-enable;
-	};
-
-	i2c1_pins: i2c1 {
-		pins = "RIIC1_SDA", "RIIC1_SCL";
-		input-enable;
-	};
-
-	i2c3_pins: i2c3 {
-		pinmux = <RZG2L_PORT_PINMUX(18, 0, 3)>, /* SDA */
-			 <RZG2L_PORT_PINMUX(18, 1, 3)>; /* SCL */
-	};
-
-	scif0_pins: scif0 {
-		pinmux = <RZG2L_PORT_PINMUX(38, 0, 1)>,	/* TxD */
-			 <RZG2L_PORT_PINMUX(38, 1, 1)>;	/* RxD */
-	};
-
-	scif2_pins: scif2 {
-		pinmux = <RZG2L_PORT_PINMUX(48, 0, 1)>, /* TxD */
-			 <RZG2L_PORT_PINMUX(48, 1, 1)>, /* RxD */
-			 <RZG2L_PORT_PINMUX(48, 3, 1)>, /* CTS# */
-			 <RZG2L_PORT_PINMUX(48, 4, 1)>; /* RTS# */
-	};
-
-	sd1-pwr-en-hog {
-		gpio-hog;
-		gpios = <RZG2L_GPIO(39, 2) GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "sd1_pwr_en";
-	};
-
-	sdhi1_pins: sd1 {
-		sd1_data {
-			pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3";
-			power-source = <3300>;
-		};
-
-		sd1_ctrl {
-			pins = "SD1_CLK", "SD1_CMD";
-			power-source = <3300>;
-		};
-
-		sd1_mux {
-			pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>; /* SD1_CD */
-		};
-	};
-
-	sdhi1_pins_uhs: sd1_uhs {
-		sd1_data_uhs {
-			pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3";
-			power-source = <1800>;
-		};
-
-		sd1_ctrl_uhs {
-			pins = "SD1_CLK", "SD1_CMD";
-			power-source = <1800>;
-		};
-
-		sd1_mux_uhs {
-			pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>; /* SD1_CD */
-		};
-	};
-
-	sound_clk_pins: sound_clk {
-		pins = "AUDIO_CLK1", "AUDIO_CLK2";
-		input-enable;
-	};
-
-	spi1_pins: spi1 {
-		pinmux = <RZG2L_PORT_PINMUX(44, 0, 1)>, /* CK */
-			 <RZG2L_PORT_PINMUX(44, 1, 1)>, /* MOSI */
-			 <RZG2L_PORT_PINMUX(44, 2, 1)>, /* MISO */
-			 <RZG2L_PORT_PINMUX(44, 3, 1)>; /* SSL */
-	};
-
-	ssi0_pins: ssi0 {
-		pinmux = <RZG2L_PORT_PINMUX(45, 0, 1)>, /* BCK */
-			 <RZG2L_PORT_PINMUX(45, 1, 1)>, /* RCK */
-			 <RZG2L_PORT_PINMUX(45, 2, 1)>, /* TXD */
-			 <RZG2L_PORT_PINMUX(45, 3, 1)>; /* RXD */
-	};
-
-	usb0_pins: usb0 {
-		pinmux = <RZG2L_PORT_PINMUX(4, 0, 1)>, /* VBUS */
-			 <RZG2L_PORT_PINMUX(5, 0, 1)>, /* OVC */
-			 <RZG2L_PORT_PINMUX(5, 1, 1)>; /* OTG_ID */
-	};
-
-	usb1_pins: usb1 {
-		pinmux = <RZG2L_PORT_PINMUX(42, 0, 1)>, /* VBUS */
-			 <RZG2L_PORT_PINMUX(42, 1, 1)>; /* OVC */
 	};
 };
 
-&scif0 {
-	pinctrl-0 = <&scif0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
 /*
  * To enable SCIF2 (SER0) on PMOD1 (CN7)
  * SW1 should be at position 2->3 so that SER0_CTS# line is activated
@@ -311,45 +33,3 @@
 	status = "okay";
 };
 #endif
-
-&sdhi1 {
-	pinctrl-0 = <&sdhi1_pins>;
-	pinctrl-1 = <&sdhi1_pins_uhs>;
-	pinctrl-names = "default", "state_uhs";
-
-	vmmc-supply = <&reg_3p3v>;
-	vqmmc-supply = <&vccq_sdhi1>;
-	bus-width = <4>;
-	sd-uhs-sdr50;
-	sd-uhs-sdr104;
-	status = "okay";
-};
-
-&spi1 {
-	pinctrl-0 = <&spi1_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&ssi0 {
-	pinctrl-0 = <&ssi0_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&usb2_phy0 {
-	pinctrl-0 = <&usb0_pins>;
-	pinctrl-names = "default";
-
-	vbus-supply = <&usb0_vbus_otg>;
-	status = "okay";
-};
-
-&usb2_phy1 {
-	pinctrl-0 = <&usb1_pins>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-smarc-pinfunction.dtsi b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-pinfunction.dtsi
new file mode 100644
index 000000000000..37ff2091582e
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-pinfunction.dtsi
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2LC SMARC pincontrol parts
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+
+&pinctrl {
+	pinctrl-0 = <&sound_clk_pins>;
+	pinctrl-names = "default";
+
+	scif0_pins: scif0 {
+		pinmux = <RZG2L_PORT_PINMUX(38, 0, 1)>,	/* TxD */
+			 <RZG2L_PORT_PINMUX(38, 1, 1)>;	/* RxD */
+	};
+
+#if SW_SCIF_CAN
+	/* SW8 should be at position 2->1 */
+	can1_pins: can1 {
+		pinmux = <RZG2L_PORT_PINMUX(40, 0, 3)>, /* TxD */
+			 <RZG2L_PORT_PINMUX(40, 1, 3)>; /* RxD */
+	};
+#endif
+
+	scif1_pins: scif1 {
+		pinmux = <RZG2L_PORT_PINMUX(40, 0, 1)>, /* TxD */
+			 <RZG2L_PORT_PINMUX(40, 1, 1)>, /* RxD */
+			 <RZG2L_PORT_PINMUX(41, 0, 1)>, /* CTS# */
+			 <RZG2L_PORT_PINMUX(41, 1, 1)>; /* RTS# */
+	};
+
+#if SW_RSPI_CAN
+	/* SW8 should be at position 2->3 so that GPIO9_CAN1_STB line is activated */
+	can1-stb-hog {
+		gpio-hog;
+		gpios = <RZG2L_GPIO(44, 3) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "can1_stb";
+	};
+
+	can1_pins: can1 {
+		pinmux = <RZG2L_PORT_PINMUX(44, 0, 3)>, /* TxD */
+			 <RZG2L_PORT_PINMUX(44, 1, 3)>; /* RxD */
+	};
+#endif
+
+	sd1-pwr-en-hog {
+		gpio-hog;
+		gpios = <RZG2L_GPIO(39, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "sd1_pwr_en";
+	};
+
+	sdhi1_pins: sd1 {
+		sd1_data {
+			pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3";
+			power-source = <3300>;
+		};
+
+		sd1_ctrl {
+			pins = "SD1_CLK", "SD1_CMD";
+			power-source = <3300>;
+		};
+
+		sd1_mux {
+			pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>; /* SD1_CD */
+		};
+	};
+
+	sdhi1_pins_uhs: sd1_uhs {
+		sd1_data_uhs {
+			pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3";
+			power-source = <1800>;
+		};
+
+		sd1_ctrl_uhs {
+			pins = "SD1_CLK", "SD1_CMD";
+			power-source = <1800>;
+		};
+
+		sd1_mux_uhs {
+			pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>; /* SD1_CD */
+		};
+	};
+
+	sound_clk_pins: sound_clk {
+		pins = "AUDIO_CLK1", "AUDIO_CLK2";
+		input-enable;
+	};
+};
+
diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi
new file mode 100644
index 000000000000..88a7938017aa
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-som.dtsi
@@ -0,0 +1,222 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2LC SMARC SOM common parts
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+
+/ {
+	aliases {
+		ethernet0 = &eth0;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x38000000>;
+	};
+
+	reg_1p8v: regulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		states = <3300000 1>, <1800000 0>;
+		regulator-boot-on;
+		gpios = <&pinctrl RZG2L_GPIO(39, 0) GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+	};
+};
+
+&eth0 {
+	pinctrl-0 = <&eth0_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	phy0: ethernet-phy@7 {
+		compatible = "ethernet-phy-id0022.1640",
+			     "ethernet-phy-ieee802.3-c22";
+		reg = <7>;
+		rxc-skew-psec = <2400>;
+		txc-skew-psec = <2400>;
+		rxdv-skew-psec = <0>;
+		txdv-skew-psec = <0>;
+		rxd0-skew-psec = <0>;
+		rxd1-skew-psec = <0>;
+		rxd2-skew-psec = <0>;
+		rxd3-skew-psec = <0>;
+		txd0-skew-psec = <0>;
+		txd1-skew-psec = <0>;
+		txd2-skew-psec = <0>;
+		txd3-skew-psec = <0>;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <24000000>;
+};
+
+&pinctrl {
+	eth0_pins: eth0 {
+		pinmux = <RZG2L_PORT_PINMUX(28, 1, 1)>, /* ET0_LINKSTA */
+			 <RZG2L_PORT_PINMUX(27, 1, 1)>, /* ET0_MDC */
+			 <RZG2L_PORT_PINMUX(28, 0, 1)>, /* ET0_MDIO */
+			 <RZG2L_PORT_PINMUX(20, 0, 1)>, /* ET0_TXC */
+			 <RZG2L_PORT_PINMUX(20, 1, 1)>, /* ET0_TX_CTL */
+			 <RZG2L_PORT_PINMUX(20, 2, 1)>, /* ET0_TXD0 */
+			 <RZG2L_PORT_PINMUX(21, 0, 1)>, /* ET0_TXD1 */
+			 <RZG2L_PORT_PINMUX(21, 1, 1)>, /* ET0_TXD2 */
+			 <RZG2L_PORT_PINMUX(22, 0, 1)>, /* ET0_TXD3 */
+			 <RZG2L_PORT_PINMUX(24, 0, 1)>, /* ET0_RXC */
+			 <RZG2L_PORT_PINMUX(24, 1, 1)>, /* ET0_RX_CTL */
+			 <RZG2L_PORT_PINMUX(25, 0, 1)>, /* ET0_RXD0 */
+			 <RZG2L_PORT_PINMUX(25, 1, 1)>, /* ET0_RXD1 */
+			 <RZG2L_PORT_PINMUX(26, 0, 1)>, /* ET0_RXD2 */
+			 <RZG2L_PORT_PINMUX(26, 1, 1)>; /* ET0_RXD3 */
+	};
+
+	gpio-sd0-pwr-en-hog {
+		gpio-hog;
+		gpios = <RZG2L_GPIO(18, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "gpio_sd0_pwr_en";
+	};
+
+	/*
+	 * SD0 device selection is XOR between GPIO_SD0_DEV_SEL and SW1[2]
+	 * The below switch logic can be used to select the device between
+	 * eMMC and microSD, after setting GPIO_SD0_DEV_SEL to high in DT.
+	 * SW1[2] should be at OFF position to enable 64 GB eMMC
+	 * SW1[2] should be at position ON to enable uSD card CN3
+	 */
+	gpio-sd0-dev-sel-hog {
+		gpio-hog;
+		gpios = <RZG2L_GPIO(40, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "gpio_sd0_dev_sel";
+	};
+
+	sdhi0_emmc_pins: sd0emmc {
+		sd0_emmc_data {
+			pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3",
+			       "SD0_DATA4", "SD0_DATA5", "SD0_DATA6", "SD0_DATA7";
+			power-source = <1800>;
+		};
+
+		sd0_emmc_ctrl {
+			pins = "SD0_CLK", "SD0_CMD";
+			power-source = <1800>;
+		};
+
+		sd0_emmc_rst {
+			pins = "SD0_RST#";
+			power-source = <1800>;
+		};
+	};
+
+	sdhi0_pins: sd0 {
+		sd0_data {
+			pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3";
+			power-source = <3300>;
+		};
+
+		sd0_ctrl {
+			pins = "SD0_CLK", "SD0_CMD";
+			power-source = <3300>;
+		};
+
+		sd0_mux {
+			pinmux = <RZG2L_PORT_PINMUX(18, 0, 1)>; /* SD0_CD */
+		};
+	};
+
+	sdhi0_pins_uhs: sd0_uhs {
+		sd0_data_uhs {
+			pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3";
+			power-source = <1800>;
+		};
+
+		sd0_ctrl_uhs {
+			pins = "SD0_CLK", "SD0_CMD";
+			power-source = <1800>;
+		};
+
+		sd0_mux_uhs {
+			pinmux = <RZG2L_PORT_PINMUX(18, 0, 1)>; /* SD0_CD */
+		};
+	};
+};
+
+#if (!SW_SD0_DEV_SEL)
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-1 = <&sdhi0_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+#endif
+
+#if SW_SD0_DEV_SEL
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_emmc_pins>;
+	pinctrl-1 = <&sdhi0_emmc_pins>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	fixed-emmc-driver-type = <1>;
+	status = "okay";
+};
+#endif
+
+&wdt0 {
+	status = "okay";
+	timeout-sec = <60>;
+};
+
+&wdt1 {
+	status = "okay";
+	timeout-sec = <60>;
+};
+
+&wdt2 {
+	status = "okay";
+	timeout-sec = <60>;
+};
diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi
new file mode 100644
index 000000000000..df7631fe5fac
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/G2LC SMARC EVK parts
+ *
+ * Copyright (C) 2022 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+
+/*
+ * DIP-Switch SW1 setting on SoM
+ * 1 : High; 0: Low
+ * SW1-2 : SW_SD0_DEV_SEL	(1: eMMC; 0: uSD)
+ * SW1-3 : SW_SCIF_CAN		(1: CAN1; 0: SCIF1)
+ * SW1-4 : SW_RSPI_CAN		(1: CAN1; 0: RSPI1)
+ * SW1-5 : SW_I2S0_I2S1		(1: I2S2 (HDMI audio); 0: I2S0)
+ * Please change below macros according to SW1 setting
+ */
+
+#define SW_SD0_DEV_SEL	1
+
+#define SW_SCIF_CAN	0
+#if (SW_SCIF_CAN)
+/* Due to HW routing, SW_RSPI_CAN is always 0 when SW_SCIF_CAN is set to 1 */
+#define SW_RSPI_CAN	0
+#else
+/* Please set SW_RSPI_CAN. Default value is 1 */
+#define SW_RSPI_CAN	1
+#endif
+
+#if (SW_SCIF_CAN & SW_RSPI_CAN)
+#error "Can not set 1 to both SW_SCIF_CAN and SW_RSPI_CAN due to HW routing"
+#endif
+
+#include "rzg2lc-smarc-som.dtsi"
+#include "rzg2lc-smarc-pinfunction.dtsi"
+#include "rz-smarc-common.dtsi"
+
+/* comment the #define statement to disable SCIF1 (SER0) on PMOD1 (CN7) */
+#define PMOD1_SER0	1
+
+/ {
+	aliases {
+		serial1 = &scif1;
+	};
+};
+
+#if (SW_SCIF_CAN || SW_RSPI_CAN)
+&canfd {
+	pinctrl-0 = <&can1_pins>;
+	/delete-node/ channel@0;
+};
+#else
+&canfd {
+	/delete-property/ pinctrl-0;
+	/delete-property/ pinctrl-names;
+	status = "disabled";
+};
+#endif
+
+/*
+ * To enable SCIF1 (SER0) on PMOD1 (CN7), On connector board
+ * SW1 should be at position 2->3 so that SER0_CTS# line is activated
+ * SW2 should be at position 2->3 so that SER0_TX line is activated
+ * SW3 should be at position 2->3 so that SER0_RX line is activated
+ * SW4 should be at position 2->3 so that SER0_RTS# line is activated
+ */
+#if (!SW_SCIF_CAN && PMOD1_SER0)
+&scif1 {
+	pinctrl-0 = <&scif1_pins>;
+	pinctrl-names = "default";
+
+	uart-has-rtscts;
+	status = "okay";
+};
+#endif
diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
index 61bd4df09df0..ae532cd21708 100644
--- a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
@@ -26,6 +26,38 @@
 		select-gpios = <&gpio_exp_75 13 GPIO_ACTIVE_HIGH>;
 	};
 
+	hdmi1-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi1_con: endpoint {
+				remote-endpoint = <&adv7513_out>;
+			};
+		};
+	};
+
+	accel_3v3: regulator-acc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "accel-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	hdmi_1v8: regulator-hdmi-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "hdmi-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	hdmi_3v3: regulator-hdmi-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "hdmi-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	snd_3p3v: regulator-snd_3p3v {
 		compatible = "regulator-fixed";
 		regulator-name = "snd-3.3v";
@@ -65,6 +97,10 @@
 	status = "okay";
 };
 
+&du_out_rgb {
+	remote-endpoint = <&adv7513_in>;
+};
+
 &ehci0 {
 	dr_mode = "otg";
 	status = "okay";
@@ -91,12 +127,72 @@
 		reg = <0x71>;
 		reset-gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
 
+		/* HDMIoSDA, HDMIoSCL */
+		i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			hdmi@3d {
+				compatible = "adi,adv7513";
+				reg = <0x3d>;
+
+				pinctrl-0 = <&hdmi1_pins>;
+				pinctrl-names = "default";
+
+				interrupt-parent = <&gpio2>;
+				interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+
+				clocks = <&cs2000>;
+				clock-names = "cec";
+
+				pd-gpios = <&gpio_exp_75 5 GPIO_ACTIVE_LOW>;
+
+				avdd-supply = <&hdmi_1v8>;
+				dvdd-supply = <&hdmi_1v8>;
+				pvdd-supply = <&hdmi_1v8>;
+				dvdd-3v-supply = <&hdmi_3v3>;
+				bgvdd-supply = <&hdmi_1v8>;
+
+				adi,input-depth = <8>;
+				adi,input-colorspace = "rgb";
+				adi,input-clock = "1x";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						adv7513_in: endpoint {
+							remote-endpoint = <&du_out_rgb>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						adv7513_out: endpoint {
+							remote-endpoint = <&hdmi1_con>;
+						};
+					};
+				};
+			};
+		};
+
 		/* Audio_SDA, Audio_SCL */
 		i2c@7 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <7>;
 
+			accelerometer@1d {
+				compatible = "st,lsm9ds0-imu";
+				reg = <0x1d>;
+
+				vdd-supply = <&accel_3v3>;
+				vddio-supply = <&accel_3v3>;
+			};
+
 			pcm3168a: audio-codec@44 {
 				#sound-dai-cells = <0>;
 				compatible = "ti,pcm3168a";
@@ -131,6 +227,14 @@
 					};
 				};
 			};
+
+			gyroscope@6b {
+				compatible = "st,lsm9ds0-gyro";
+				reg = <0x6b>;
+
+				vdd-supply = <&accel_3v3>;
+				vddio-supply = <&accel_3v3>;
+			};
 		};
 	};
 
@@ -264,6 +368,19 @@
 		function = "can1";
 	};
 
+	hdmi1_pins: hdmi1 {
+		adv7513-interrupt {
+			pins = "GP_2_14";
+			bias-pull-up;
+		};
+
+		du {
+			groups = "du_rgb888", "du_sync", "du_clk_out_0",
+				 "du_disp";
+			function = "du";
+		};
+	};
+
 	hscif0_pins: hscif0 {
 		groups = "hscif0_data", "hscif0_ctrl";
 		function = "hscif0";
@@ -297,17 +414,14 @@
 		     &sound_pcm_pins>;
 
 	ports {
-		/* rsnd_port0/1 are on salvator-common */
+		/* rsnd_port0/1 are defined in ulcb.dtsi */
 		rsnd_port2: port@2 {
 			reg = <2>;
 			rsnd_for_pcm3168a_play: endpoint {
 				remote-endpoint = <&pcm3168a_endpoint_p>;
-
-				dai-format = "i2s";
-				bitclock-master = <&rsnd_for_pcm3168a_play>;
-				frame-master = <&rsnd_for_pcm3168a_play>;
+				bitclock-master;
+				frame-master;
 				dai-tdm-slot-num = <8>;
-
 				playback = <&ssi3>;
 			};
 		};
@@ -315,12 +429,9 @@
 			reg = <3>;
 			rsnd_for_pcm3168a_capture: endpoint {
 				remote-endpoint = <&pcm3168a_endpoint_c>;
-
-				dai-format = "i2s";
-				bitclock-master = <&rsnd_for_pcm3168a_capture>;
-				frame-master = <&rsnd_for_pcm3168a_capture>;
+				bitclock-master;
+				frame-master;
 				dai-tdm-slot-num = <6>;
-
 				capture  = <&ssi4>;
 			};
 		};
@@ -360,10 +471,10 @@
 };
 
 &sound_card {
-	dais = <&rsnd_port0	/* ak4613 */
-		&rsnd_port1	/* HDMI0  */
-		&rsnd_port2	/* pcm3168a playback */
-		&rsnd_port3	/* pcm3168a capture  */
+	links = <&rsnd_port0	/* ak4613 */
+		 &rsnd_port1	/* HDMI0  */
+		 &rsnd_port2	/* pcm3168a playback */
+		 &rsnd_port3	/* pcm3168a capture  */
 		>;
 };
 
diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi
index a7e93df4ced8..b4bdb2d7e4ba 100644
--- a/arch/arm64/boot/dts/renesas/ulcb.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi
@@ -95,11 +95,11 @@
 	};
 
 	sound_card: sound {
-		compatible = "audio-graph-card";
+		compatible = "audio-graph-card2";
 		label = "rcar-sound";
 
-		dais = <&rsnd_port0	/* ak4613 */
-			&rsnd_port1	/* HDMI0  */
+		links = <&rsnd_port0	/* ak4613 */
+			 &rsnd_port1	/* HDMI0  */
 			>;
 	};
 
@@ -408,11 +408,8 @@
 			reg = <0>;
 			rsnd_for_ak4613: endpoint {
 				remote-endpoint = <&ak4613_endpoint>;
-
-				dai-format = "left_j";
-				bitclock-master = <&rsnd_for_ak4613>;
-				frame-master = <&rsnd_for_ak4613>;
-
+				bitclock-master;
+				frame-master;
 				playback = <&ssi0>, <&src0>, <&dvc0>;
 				capture  = <&ssi1>, <&src1>, <&dvc1>;
 			};
@@ -421,11 +418,8 @@
 			reg = <1>;
 			rsnd_for_hdmi: endpoint {
 				remote-endpoint = <&dw_hdmi0_snd_in>;
-
-				dai-format = "i2s";
-				bitclock-master = <&rsnd_for_hdmi>;
-				frame-master = <&rsnd_for_hdmi>;
-
+				bitclock-master;
+				frame-master;
 				playback = <&ssi2>;
 			};
 		};
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 479906f3ad7b..4ae9f35434b8 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -56,5 +56,8 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-rock-pi-n10.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.1.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi
index f972704dfe7a..56dfbb2e2fa6 100644
--- a/arch/arm64/boot/dts/rockchip/px30.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30.dtsi
@@ -711,7 +711,7 @@
 		clock-names = "pclk", "timer";
 	};
 
-	dmac: dmac@ff240000 {
+	dmac: dma-controller@ff240000 {
 		compatible = "arm,pl330", "arm,primecell";
 		reg = <0x0 0xff240000 0x0 0x4000>;
 		interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-a1.dts b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
index de2d3e88e27f..40bf808642b9 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
@@ -160,6 +160,7 @@
 		pinctrl-0 = <&pmic_int_l>;
 		rockchip,system-power-controller;
 		wakeup-source;
+		#clock-cells = <0>;
 
 		vcc1-supply = <&vcc_sys>;
 		vcc2-supply = <&vcc_sys>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index 39db0b85b4da..b822533dc7f1 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -489,7 +489,7 @@
 		status = "disabled";
 	};
 
-	dmac: dmac@ff1f0000 {
+	dmac: dma-controller@ff1f0000 {
 		compatible = "arm,pl330", "arm,primecell";
 		reg = <0x0 0xff1f0000 0x0 0x4000>;
 		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
index c4dd2a6b4836..c654b6b02f3f 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
@@ -245,12 +245,12 @@
 	vdd_log: vdd-log {
 		compatible = "pwm-regulator";
 		pwms = <&pwm2 0 25000 1>;
+		pwm-supply = <&vcc_sys>;
 		regulator-name = "vdd_log";
 		regulator-always-on;
 		regulator-boot-on;
 		regulator-min-microvolt = <430000>;
 		regulator-max-microvolt = <1400000>;
-		vin-supply = <&vcc_sys>;
 	};
 };
 
@@ -298,6 +298,11 @@
 	status = "okay";
 };
 
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
 &hdmi {
 	ddc-i2c-bus = <&i2c3>;
 	pinctrl-names = "default";
@@ -770,8 +775,8 @@
 	sd-uhs-sdr104;
 
 	/* Power supply */
-	vqmmc-supply = &vcc1v8_s3;	/* IO line */
-	vmmc-supply = &vcc_sdio;	/* card's power */
+	vqmmc-supply = <&vcc1v8_s3>;	/* IO line */
+	vmmc-supply = <&vcc_sdio>;	/* card's power */
 
 	#address-cells = <1>;
 	#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
index 9b2c679f5eca..3355fb90fa54 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi
@@ -462,7 +462,7 @@ ap_i2c_tp: &i2c5 {
 };
 
 &cros_ec {
-	cros_ec_pwm: ec-pwm {
+	cros_ec_pwm: pwm {
 		compatible = "google,cros-ec-pwm";
 		#pwm-cells = <1>;
 	};
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
index 45a5ae5d2027..162f08bca0d4 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
@@ -286,7 +286,7 @@
 
 	sound: sound {
 		compatible = "rockchip,rk3399-gru-sound";
-		rockchip,cpu = <&i2s0 &i2s2>;
+		rockchip,cpu = <&i2s0 &spdif>;
 	};
 };
 
@@ -437,10 +437,6 @@ ap_i2c_audio: &i2c8 {
 	status = "okay";
 };
 
-&i2s2 {
-	status = "okay";
-};
-
 &io_domains {
 	status = "okay";
 
@@ -537,6 +533,17 @@ ap_i2c_audio: &i2c8 {
 	vqmmc-supply = <&ppvar_sd_card_io>;
 };
 
+&spdif {
+	status = "okay";
+
+	/*
+	 * SPDIF is routed internally to DP; we either don't use these pins, or
+	 * mux them to something else.
+	 */
+	/delete-property/ pinctrl-0;
+	/delete-property/ pinctrl-names;
+};
+
 &spi1 {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
index f1fcc6b5b402..7ba3ed24084b 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi
@@ -80,12 +80,12 @@
 	vdd_log: vdd-log {
 		compatible = "pwm-regulator";
 		pwms = <&pwm2 0 25000 1>;
+		pwm-supply = <&vsys_3v3>;
 		regulator-name = "vdd_log";
 		regulator-always-on;
 		regulator-boot-on;
 		regulator-min-microvolt = <800000>;
 		regulator-max-microvolt = <1400000>;
-		vin-supply = <&vsys_3v3>;
 	};
 
 	vsys: vsys {
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts b/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts
index e890166e7fd4..5bbe74bed0ea 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts
@@ -102,12 +102,12 @@
 	vdd_log: vdd-log {
 		compatible = "pwm-regulator";
 		pwms = <&pwm2 0 25000 1>;
+		pwm-supply = <&vcc5v0_sys>;
 		regulator-name = "vdd_log";
 		regulator-always-on;
 		regulator-boot-on;
 		regulator-min-microvolt = <800000>;
 		regulator-max-microvolt = <1400000>;
-		vin-supply = <&vcc5v0_sys>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
index 04b54abea3cc..9d3a718f66f6 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts
@@ -166,12 +166,12 @@
 	vdd_log: vdd-log {
 		compatible = "pwm-regulator";
 		pwms = <&pwm2 0 25000 1>;
+		pwm-supply = <&vcc_sys>;
 		regulator-name = "vdd_log";
 		regulator-always-on;
 		regulator-boot-on;
 		regulator-min-microvolt = <800000>;
 		regulator-max-microvolt = <1400000>;
-		vin-supply = <&vcc_sys>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
index c2f021a1a18f..d6b68d77d63a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
@@ -243,12 +243,12 @@
 	vdd_log: vdd-log {
 		compatible = "pwm-regulator";
 		pwms = <&pwm2 0 25000 1>;
+		pwm-supply = <&vcc_sysin>;
 		regulator-name = "vdd_log";
 		regulator-always-on;
 		regulator-boot-on;
 		regulator-min-microvolt = <800000>;
 		regulator-max-microvolt = <1400000>;
-		vin-supply = <&vcc_sysin>;
 
 		regulator-state-mem {
 			regulator-on-in-suspend;
@@ -472,8 +472,6 @@
 		vcc10-supply = <&vcc_sysin>;
 		vcc11-supply = <&vcc_sysin>;
 		vcc12-supply = <&vcc3v3_sys>;
-		vcc13-supply = <&vcc_sysin>;
-		vcc14-supply = <&vcc_sysin>;
 
 		regulators {
 			/* rk3399 center logic supply */
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
index 292bb7e80cf3..3ae5d727e367 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
@@ -232,6 +232,7 @@
 
 &usbdrd_dwc3_0 {
 	dr_mode = "otg";
+	extcon = <&extcon_usb3>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
index fb67db4619ea..b1ac3a89f259 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
@@ -25,6 +25,13 @@
 		};
 	};
 
+	extcon_usb3: extcon-usb3 {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb3_id>;
+	};
+
 	clkin_gmac: external-gmac-clock {
 		compatible = "fixed-clock";
 		clock-frequency = <125000000>;
@@ -71,6 +78,17 @@
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 	};
+
+	vdd_log: vdd-log {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 25000 1>;
+		pwm-supply = <&vcc5v0_sys>;
+		regulator-name = "vdd_log";
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
 };
 
 &cpu_b0 {
@@ -422,9 +440,22 @@
 			  <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
+
+	usb3 {
+		usb3_id: usb3-id {
+			rockchip,pins =
+			  <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
 };
 
 &sdhci {
+	/*
+	 * Signal integrity isn't great at 200MHz but 100MHz has proven stable
+	 * enough.
+	 */
+	max-frequency = <100000000>;
+
 	bus-width = <8>;
 	mmc-hs400-1_8v;
 	mmc-hs400-enhanced-strobe;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
index d1aaf8e83391..0e45cc2d195b 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi
@@ -310,8 +310,6 @@
 		vcc10-supply = <&vcc3v3_sys>;
 		vcc11-supply = <&vcc3v3_sys>;
 		vcc12-supply = <&vcc3v3_sys>;
-		vcc13-supply = <&vcc3v3_sys>;
-		vcc14-supply = <&vcc3v3_sys>;
 		vddio-supply = <&vcc_3v0>;
 
 		regulators {
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
index 92acf6ea299b..401e1ae9d944 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi
@@ -144,12 +144,12 @@
 	vdd_log: vdd-log {
 		compatible = "pwm-regulator";
 		pwms = <&pwm2 0 25000 1>;
+		pwm-supply = <&vcc5v0_sys>;
 		regulator-name = "vdd_log";
 		regulator-always-on;
 		regulator-boot-on;
 		regulator-min-microvolt = <800000>;
 		regulator-max-microvolt = <1400000>;
-		vin-supply = <&vcc5v0_sys>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
index 83db4ca67334..45e77f86d329 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi
@@ -213,12 +213,12 @@
 	vdd_log: vdd-log {
 		compatible = "pwm-regulator";
 		pwms = <&pwm2 0 25000 1>;
+		pwm-supply = <&vcc5v0_sys>;
 		regulator-name = "vdd_log";
 		regulator-always-on;
 		regulator-boot-on;
 		regulator-min-microvolt = <800000>;
 		regulator-max-microvolt = <1700000>;
-		vin-supply = <&vcc5v0_sys>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
index 46b0f97a0b1c..2aa0fad8f893 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
@@ -133,12 +133,12 @@
 	vdd_log: vdd-log {
 		compatible = "pwm-regulator";
 		pwms = <&pwm2 0 25000 1>;
+		pwm-supply = <&vcc_sys>;
 		regulator-name = "vdd_log";
 		regulator-always-on;
 		regulator-boot-on;
 		regulator-min-microvolt = <800000>;
 		regulator-max-microvolt = <1400000>;
-		vin-supply = <&vcc_sys>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index d3cdf6f42a30..080457a68e3c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -1881,10 +1881,10 @@
 		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH 0>;
 		clocks = <&cru PCLK_HDMI_CTRL>,
 			 <&cru SCLK_HDMI_SFR>,
-			 <&cru PLL_VPLL>,
+			 <&cru SCLK_HDMI_CEC>,
 			 <&cru PCLK_VIO_GRF>,
-			 <&cru SCLK_HDMI_CEC>;
-		clock-names = "iahb", "isfr", "vpll", "grf", "cec";
+			 <&cru PLL_VPLL>;
+		clock-names = "iahb", "isfr", "cec", "grf", "vpll";
 		power-domains = <&power RK3399_PD_HDCP>;
 		reg-io-width = <4>;
 		rockchip,grf = <&grf>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-pinenote-v1.1.dts b/arch/arm64/boot/dts/rockchip/rk3566-pinenote-v1.1.dts
new file mode 100644
index 000000000000..5b0b7ebf9fee
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-pinenote-v1.1.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3566-pinenote.dtsi"
+
+/ {
+	model = "Pine64 PineNote v1.1";
+	compatible = "pine64,pinenote-v1.1", "pine64,pinenote", "rockchip,rk3566";
+};
+
+&pmu_io_domains {
+	vccio7-supply = <&vcc_1v8>;
+};
+
+&spk_amp {
+	VCC-supply = <&dcdc_boost>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-pinenote-v1.2.dts b/arch/arm64/boot/dts/rockchip/rk3566-pinenote-v1.2.dts
new file mode 100644
index 000000000000..6bbc4c675d64
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-pinenote-v1.2.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3566-pinenote.dtsi"
+
+/ {
+	model = "Pine64 PineNote v1.2";
+	compatible = "pine64,pinenote-v1.2", "pine64,pinenote", "rockchip,rk3566";
+};
+
+&pmu_io_domains {
+	vccio7-supply = <&vcc_3v3>;
+};
+
+&spk_amp {
+	VCC-supply = <&vcc_bat>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi
new file mode 100644
index 000000000000..fea748adfa90
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi
@@ -0,0 +1,639 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+
+#include "rk3566.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &sdhci;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1750000>;
+
+		recovery {
+			label = "recovery";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <0>;
+		};
+	};
+
+	spk_amp: audio-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&spk_amp_enable_h>;
+		pinctrl-names = "default";
+		sound-name-prefix = "Speaker Amp";
+	};
+
+	dmic_codec: dmic-codec {
+		compatible = "dmic-codec";
+		num-channels = <6>;
+		#sound-dai-cells = <0>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&hall_int_l>;
+		pinctrl-names = "default";
+
+		cover {
+			label = "cover";
+			gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_MACHINE_COVER>;
+			linux,can-disable;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&led_pin>;
+		pinctrl-names = "default";
+
+		led-0 {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_CHARGING;
+			gpios = <&gpio3 RK_PC5 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk817 1>;
+		clock-names = "ext_clock";
+		pinctrl-0 = <&wifi_enable_h>;
+		pinctrl-names = "default";
+		reset-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_LOW>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "PineNote";
+		simple-audio-card,aux-devs = <&spk_amp>;
+		simple-audio-card,widgets = "Headphone", "Headphones",
+					    "Speaker", "Internal Speakers";
+		simple-audio-card,routing = "Headphones", "HPOL",
+					    "Headphones", "HPOR",
+					    "Internal Speakers", "Speaker Amp OUTL",
+					    "Internal Speakers", "Speaker Amp OUTR",
+					    "Speaker Amp INL", "HPOL",
+					    "Speaker Amp INR", "HPOR";
+		simple-audio-card,pin-switches = "Internal Speakers";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		simple-audio-card,dai-link@0 {
+			reg = <0>;
+			bitclock-master = <&link0_cpu>;
+			format = "i2s";
+			frame-master = <&link0_cpu>;
+			mclk-fs = <256>;
+
+			link0_cpu: cpu {
+				sound-dai = <&i2s1_8ch>;
+			};
+
+			link0_codec: codec {
+				sound-dai = <&rk817>;
+			};
+		};
+
+		simple-audio-card,dai-link@1 {
+			reg = <1>;
+			bitclock-master = <&link1_cpu>;
+			format = "pdm";
+			frame-master = <&link1_cpu>;
+
+			link1_cpu: cpu {
+				sound-dai = <&pdm>;
+			};
+
+			link1_codec: codec {
+				sound-dai = <&dmic_codec>;
+			};
+		};
+	};
+
+	vbat_4g: vbat-4g {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat_4g";
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+		/* powered by vcc_bat, enabled by vbat_4g_en */
+		vin-supply = <&vbat_4g_en>;
+	};
+
+	vcc_1v8: vcc-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v8";
+		regulator-always-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		/* powered by vcc_sys, enabled by vcc_1v8_en */
+		vin-supply = <&vcc_1v8_en>;
+	};
+
+	vcc_bat: vcc-bat {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_bat";
+		regulator-always-on;
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+	};
+
+	vcc_hall_3v3: vcc-hall-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_hall_3v3";
+		regulator-always-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vcc_sys: vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-always-on;
+		regulator-min-microvolt = <3800000>;
+		regulator-max-microvolt = <3800000>;
+		vin-supply = <&vcc_bat>;
+	};
+
+	vcc_wl: vcc-wl {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&vcc_wl_pin>;
+		pinctrl-names = "default";
+		regulator-name = "vcc_wl";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_bat>;
+	};
+
+	vdda_0v9: vdda-0v9 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdda_0v9";
+		regulator-always-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		/* powered by vcc_sys, enabled by vcc_1v8_en */
+		vin-supply = <&vcc_1v8_en>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <0>;
+		regulator-name = "vdd_cpu";
+		regulator-min-microvolt = <712500>;
+		regulator-max-microvolt = <1390000>;
+		regulator-ramp-delay = <2300>;
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+
+		regulator-state-mem {
+			regulator-on-in-suspend;
+		};
+	};
+
+	rk817: pmic@20 {
+		compatible = "rockchip,rk817";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
+		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
+		clocks = <&cru I2S1_MCLKOUT_TX>;
+		clock-names = "mclk";
+		#clock-cells = <1>;
+		pinctrl-0 = <&i2s1m0_mclk>, <&pmic_int_l>, <&pmic_sleep>;
+		pinctrl-names = "default";
+		rockchip,system-power-controller;
+		#sound-dai-cells = <0>;
+		wakeup-source;
+
+		vcc1-supply = <&vcc_sys>;
+		vcc2-supply = <&vcc_sys>;
+		vcc3-supply = <&vcc_sys>;
+		vcc4-supply = <&vcc_sys>;
+		vcc5-supply = <&vcc_sys>;
+		vcc6-supply = <&vcc_sys>;
+		vcc7-supply = <&vcc_sys>;
+		vcc8-supply = <&vcc_sys>;
+		vcc9-supply = <&dcdc_boost>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-always-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-init-microvolt = <900000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vdd_gpu_npu: DCDC_REG2 {
+				regulator-name = "vdd_gpu_npu";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-init-microvolt = <900000>;
+				regulator-ramp-delay = <6001>;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_3v3: DCDC_REG4 {
+				regulator-name = "vcc_3v3";
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca_1v8_pmu: LDO_REG1 {
+				regulator-name = "vcca_1v8_pmu";
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			/* unused */
+			vdda_0v9_ldo: LDO_REG2 {
+				regulator-name = "vdda_0v9_ldo";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v9_pmu: LDO_REG3 {
+				regulator-name = "vdda_0v9_pmu";
+				regulator-always-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-name = "vccio_acodec";
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			/* unused */
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3_pmu: LDO_REG6 {
+				regulator-name = "vcc_3v3_pmu";
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_1v8_en: LDO_REG7 {
+				regulator-name = "vcc_1v8_en";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vbat_4g_en: LDO_REG8 {
+				regulator-name = "vbat_4g_en";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			sleep_sta_ctl: LDO_REG9 {
+				regulator-name = "sleep_sta_ctl";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			dcdc_boost: BOOST {
+				regulator-name = "boost";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			otg_switch: OTG_SWITCH {
+				regulator-name = "otg_switch";
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	digitizer@9 {
+		compatible = "wacom,w9013", "hid-over-i2c";
+		reg = <0x09>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB6 IRQ_TYPE_LEVEL_LOW>;
+		hid-descr-addr = <0x1>;
+		pinctrl-0 = <&pen_fwe>, <&pen_irq_l>, <&pen_rst_l>;
+		pinctrl-names = "default";
+		vdd-supply = <&vcc_3v3_pmu>;
+	};
+};
+
+&i2c3 {
+	pinctrl-0 = <&i2c3m1_xfer>;
+	status = "okay";
+
+	led-controller@36 {
+		compatible = "ti,lm3630a";
+		reg = <0x36>;
+		enable-gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&backlight_hwen_h>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@0 {
+			reg = <0>;
+			label = "backlight_cool";
+			default-brightness = <0>;
+		};
+
+		led@1 {
+			reg = <1>;
+			label = "backlight_warm";
+			default-brightness = <0>;
+		};
+	};
+};
+
+&i2s1_8ch {
+	pinctrl-0 = <&i2s1m0_lrcktx>, <&i2s1m0_sclktx>, <&i2s1m0_sdi0>, <&i2s1m0_sdo0>;
+	rockchip,trcm-sync-tx-only;
+	status = "okay";
+};
+
+&pdm {
+	pinctrl-0 = <&pdmm0_clk1>, <&pdmm0_sdi1>, <&pdmm0_sdi2>;
+	/* microphones are on channels 1 and 2 */
+	rockchip,path-map = <1>, <2>, <0>, <3>;
+	status = "okay";
+};
+
+&pinctrl {
+	audio-amplifier {
+		spk_amp_enable_h: spk-amp-enable-h {
+			rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	backlight {
+		backlight_hwen_h: backlight-hwen-h {
+			rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	bt {
+		bt_enable_h: bt-enable-h {
+			rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_host_wake_l: bt-host-wake-l {
+			rockchip,pins = <0 RK_PC3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		bt_wake_h: bt-wake-h {
+			rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	led {
+		led_pin: led-pin {
+			rockchip,pins = <3 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	hall {
+		hall_int_l: hall-int-l {
+			rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pen {
+		pen_fwe: pen-fwe {
+			rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		pen_irq_l: pen-irq-l {
+			rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pen_rst_l: pen-rst-l {
+			rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int_l: pmic-int-l {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pmic_sleep: pmic-sleep {
+			rockchip,pins = <0 RK_PA2 1 &pcfg_pull_none>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	vcc-wl {
+		vcc_wl_pin: vcc-wl-pin {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wifi {
+		wifi_host_wake_l: wifi-host-wake-l {
+			rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc_3v3_pmu>;
+	pmuio2-supply = <&vcc_3v3_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio2-supply = <&vcc_1v8>;
+	vccio3-supply = <&vcc_3v3>;
+	vccio4-supply = <&vcca_1v8_pmu>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-0 = <&emmc_bus8>, <&emmc_clk>, <&emmc_cmd>, <&emmc_datastrobe>, <&emmc_rstnout>;
+	pinctrl-names = "default";
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-0 = <&sdmmc1_bus4>, <&sdmmc1_clk>, <&sdmmc1_cmd>;
+	pinctrl-names = "default";
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_wl>;
+	vqmmc-supply = <&vcca_1v8_pmu>;
+	status = "okay";
+};
+
+&tsadc {
+	/* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-mode = <1>;
+	/* tshut polarity 0:LOW 1:HIGH */
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-0 = <&uart1m0_ctsn>, <&uart1m0_rtsn>, <&uart1m0_xfer>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&rk817 1>;
+		clock-names = "lpo";
+		device-wake-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
+		host-wake-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&bt_enable_h>, <&bt_host_wake_l>, <&bt_wake_h>;
+		pinctrl-names = "default";
+		vbat-supply = <&vcc_wl>;
+		vddio-supply = <&vcca_1v8_pmu>;
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
index 166399b7f13f..dd7f4b9b686b 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts
@@ -73,6 +73,17 @@
 		};
 	};
 
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rk817 1>;
+		clock-names = "ext_clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_enable_h>;
+		post-power-on-delay-ms = <100>;
+		power-off-delay-us = <5000000>;
+		reset-gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_LOW>;
+	};
+
 	spdif_dit: spdif-dit {
 		compatible = "linux,spdif-dit";
 		#sound-dai-cells = <0>;
@@ -124,6 +135,22 @@
 		vin-supply = <&vcc12v_dcin>;
 	};
 
+	/* all four ports are controlled by one gpio
+	 * the host ports are sourced from vcc5v0_usb
+	 * the otg port is sourced from vcc5v0_midu
+	 */
+	vcc5v0_usb20_host: vcc5v0_usb20_host {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb20_host_en>;
+		regulator-name = "vcc5v0_usb20_host";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usb>;
+	};
+
 	vcc3v3_sd: vcc3v3_sd {
 		compatible = "regulator-fixed";
 		enable-active-low;
@@ -147,6 +174,17 @@
 		regulator-max-microvolt = <4400000>;
 		vin-supply = <&vbus>;
 	};
+
+	/* sourced from vcc_sys, sdio module operates internally at 3.3v */
+	vcc_wl: vcc_wl {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_wl";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_sys>;
+	};
 };
 
 &cpu0 {
@@ -205,6 +243,11 @@
 	status = "okay";
 };
 
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
 &i2c0 {
 	status = "okay";
 
@@ -285,8 +328,6 @@
 			vcc_ddr: DCDC_REG3 {
 				regulator-always-on;
 				regulator-boot-on;
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
 				regulator-initial-mode = <0x2>;
 				regulator-name = "vcc_ddr";
 				regulator-state-mem {
@@ -429,6 +470,14 @@
 	};
 };
 
+/* i2c3 is exposed on con40
+ * pin 3 - i2c3_sda_m0, pullup to vcc_3v3
+ * pin 5 - i2c3_scl_m0, pullup to vcc_3v3
+ */
+&i2c3 {
+	status = "okay";
+};
+
 &i2s1_8ch {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2s1m0_sclktx
@@ -477,6 +526,18 @@
 		};
 	};
 
+	usb2 {
+		vcc5v0_usb20_host_en: vcc5v0-usb20-host-en {
+			rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdio-pwrseq {
+		wifi_enable_h: wifi-enable-h {
+			rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	vcc_sd {
 		vcc_sd_h: vcc-sd-h {
 			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -484,6 +545,19 @@
 	};
 };
 
+&pmu_io_domains {
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio2-supply = <&vcc_1v8>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcc_1v8>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc1v8_dvp>;
+	vccio7-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
 &sdhci {
 	bus-width = <8>;
 	mmc-hs200-1_8v;
@@ -505,10 +579,32 @@
 	status = "okay";
 };
 
+&sdmmc1 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_wl>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+/* spdif is exposed on con40 pin 18 */
 &spdif {
 	status = "okay";
 };
 
+/* spi1 is exposed on con40
+ * pin 11 - spi1_mosi_m1
+ * pin 13 - spi1_miso_m1
+ * pin 15 - spi1_clk_m1
+ * pin 17 - spi1_cs0_m1
+ */
 &spi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi1m1_cs0 &spi1m1_pins>;
@@ -522,6 +618,10 @@
 	status = "okay";
 };
 
+/* uart0 is exposed on con40
+ * pin 12 - uart0_tx
+ * pin 14 - uart0_rx
+ */
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_xfer>;
@@ -548,6 +648,40 @@
 	};
 };
 
+/* uart2 is exposed on con40
+ * pin 8 - uart2_tx_m0_debug
+ * pin 10 - uart2_rx_m0_debug
+ */
 &uart2 {
 	status = "okay";
 };
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb2phy1 {
+	status = "okay";
+};
+
+&usb2phy1_host {
+	phy-supply = <&vcc5v0_usb20_host>;
+	status = "okay";
+};
+
+&usb2phy1_otg {
+	phy-supply = <&vcc5v0_usb20_host>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
new file mode 100644
index 000000000000..a01886b467ed
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
@@ -0,0 +1,457 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Author: Frank Wunderlich <frank-w@public-files.de>
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3568.dtsi"
+
+/ {
+	model = "Bananapi-R2 Pro (RK3568) DDR4 Board";
+	compatible = "rockchip,rk3568-bpi-r2pro", "rockchip,rk3568";
+
+	aliases {
+		ethernet0 = &gmac0;
+		mmc0 = &sdmmc0;
+		mmc1 = &sdhci;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&blue_led_pin &green_led_pin>;
+
+		blue_led: led-0 {
+			color = <LED_COLOR_ID_BLUE>;
+			default-state = "off";
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio0 RK_PD6 GPIO_ACTIVE_HIGH>;
+		};
+
+		green_led: led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "on";
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	dc_12v: dc-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc3v3_sys: vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_sys: vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+};
+
+&gmac0 {
+	assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
+	assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>;
+	clock_in_out = "input";
+	phy-handle = <&rgmii_phy0>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac0_miim
+		     &gmac0_tx_bus2
+		     &gmac0_rx_bus2
+		     &gmac0_rgmii_clk
+		     &gmac0_rgmii_bus>;
+	snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	/* Reset time is 20ms, 100ms for rtl8211f */
+	snps,reset-delays-us = <0 20000 100000>;
+	tx_delay = <0x3c>;
+	rx_delay = <0x2f>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		#clock-cells = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>;
+		rockchip,system-power-controller;
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc5-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+		wakeup-source;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-init-microvolt = <900000>;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-name = "vdd_gpu";
+				regulator-init-microvolt = <900000>;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_npu: DCDC_REG4 {
+				regulator-name = "vdd_npu";
+				regulator-init-microvolt = <900000>;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG5 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_image: LDO_REG1 {
+				regulator-name = "vdda0v9_image";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-name = "vdda_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-name = "vdda0v9_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-name = "vccio_acodec";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-name = "vcc3v3_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG7 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG8 {
+				regulator-name = "vcca1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_image: LDO_REG9 {
+				regulator-name = "vcca1v8_image";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3: SWITCH_REG1 {
+				regulator-name = "vcc_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_sd: SWITCH_REG2 {
+				regulator-name = "vcc3v3_sd";
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c5 {
+	/* pin 3 (SDA) + 4 (SCL) of header con2 */
+	status = "disabled";
+};
+
+&mdio0 {
+	rgmii_phy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0>;
+	};
+};
+
+&pinctrl {
+	leds {
+		blue_led_pin: blue-led-pin {
+			rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		green_led_pin: green-led-pin {
+			rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic_int {
+			rockchip,pins =
+				<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcc_1v8>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_3v3>;
+	vccio7-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&pwm8 {
+	/* fan 5v - gnd - pwm */
+	status = "okay";
+};
+
+&pwm10 {
+	/* pin 7 of header con2 */
+	status = "disabled";
+};
+
+&pwm11 {
+	/* pin 15 of header con2 */
+	status = "disabled";
+};
+
+&pwm12 {
+	/* pin 21 of header con2 */
+	/* shared with uart9 + spi3 */
+	pinctrl-0 = <&pwm12m1_pins>;
+	status = "disabled";
+};
+
+&pwm13 {
+	/* pin 24 of header con2 */
+	/* shared with uart9 */
+	pinctrl-0 = <&pwm13m1_pins>;
+	status = "disabled";
+};
+
+&pwm14 {
+	/* pin 23 of header con2 */
+	/* shared with spi3 */
+	pinctrl-0 = <&pwm14m1_pins>;
+	status = "disabled";
+};
+
+&pwm15 {
+	/* pin 19 of header con2 */
+	/* shared with spi3 */
+	pinctrl-0 = <&pwm15m1_pins>;
+	status = "disabled";
+};
+
+&saradc {
+	vref-supply = <&vcca_1v8>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
+	status = "okay";
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&spi3 {
+	/* pin 19 (MO) + 21 (MI) + 23 (CK) of header con2 */
+	/* shared with pwm12/14/15 and uart9 */
+	pinctrl-0 = <&spi3m1_pins>;
+	status = "disabled";
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&uart0 {
+	/* pin 8 (TX) + 10 (RX) (RTS:16, CTS:18) of header con2 */
+	status = "disabled";
+};
+
+&uart2 {
+	/* debug-uart */
+	status = "okay";
+};
+
+&uart7 {
+	/* pin 11 (TX) + 13 (RX) of header con2 */
+	pinctrl-0 = <&uart7m1_xfer>;
+	status = "disabled";
+};
+
+&uart9 {
+	/* pin 21 (TX) + 24 (RX) of header con2 */
+	/* shared with pwm13 and pwm12/spi3 */
+	pinctrl-0 = <&uart9m1_xfer>;
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
index 184e2aa2416a..a794a0ea5c70 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
@@ -6,6 +6,7 @@
 
 /dts-v1/;
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/rockchip.h>
 #include "rk3568.dtsi"
 
@@ -33,6 +34,33 @@
 		regulator-max-microvolt = <12000000>;
 	};
 
+	leds {
+		compatible = "gpio-leds";
+
+		led_work: led-0 {
+			gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_BLUE>;
+			linux,default-trigger = "heartbeat";
+			pinctrl-names = "default";
+			pinctrl-0 = <&led_work_en>;
+		};
+	};
+
+	rk809-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,name = "Analog RK809";
+		simple-audio-card,mclk-fs = <256>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_8ch>;
+		};
+		simple-audio-card,codec {
+			sound-dai = <&rk809>;
+		};
+	};
+
 	vcc3v3_sys: vcc3v3-sys {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc3v3_sys";
@@ -53,10 +81,38 @@
 		vin-supply = <&dc_12v>;
 	};
 
+	vcc5v0_usb: vcc5v0-usb {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_usb_host: vcc5v0-usb-host {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb_host_en>;
+		regulator-name = "vcc5v0_usb_host";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_usb>;
+	};
+
 	vcc3v3_lcd0_n: vcc3v3-lcd0-n {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc3v3_lcd0_n";
-		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&vcc3v3_sys>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc3v3_lcd0_n_en>;
 
 		regulator-state-mem {
 			regulator-off-in-suspend;
@@ -66,7 +122,13 @@
 	vcc3v3_lcd1_n: vcc3v3-lcd1-n {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc3v3_lcd1_n";
-		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&vcc3v3_sys>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc3v3_lcd1_n_en>;
 
 		regulator-state-mem {
 			regulator-off-in-suspend;
@@ -74,6 +136,22 @@
 	};
 };
 
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
 &gmac0 {
 	assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
 	assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>;
@@ -106,18 +184,45 @@
 	status = "okay";
 };
 
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
 &i2c0 {
 	status = "okay";
 
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1150000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
 	rk809: pmic@20 {
 		compatible = "rockchip,rk809";
 		reg = <0x20>;
 		interrupt-parent = <&gpio0>;
 		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
+		assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
 		#clock-cells = <1>;
+		clock-names = "mclk";
+		clocks = <&cru I2S1_MCLKOUT_TX>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_int>;
+		pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>;
 		rockchip,system-power-controller;
+		#sound-dai-cells = <0>;
 		vcc1-supply = <&vcc3v3_sys>;
 		vcc2-supply = <&vcc3v3_sys>;
 		vcc3-supply = <&vcc3v3_sys>;
@@ -147,6 +252,7 @@
 
 			vdd_gpu: DCDC_REG2 {
 				regulator-name = "vdd_gpu";
+				regulator-always-on;
 				regulator-init-microvolt = <900000>;
 				regulator-initial-mode = <0x2>;
 				regulator-min-microvolt = <500000>;
@@ -231,6 +337,7 @@
 
 			vccio_acodec: LDO_REG4 {
 				regulator-name = "vccio_acodec";
+				regulator-always-on;
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
 
@@ -315,9 +422,35 @@
 				};
 			};
 		};
+
+		codec {
+			mic-in-differential;
+		};
 	};
 };
 
+&i2c1 {
+	status = "okay";
+
+	touchscreen0: goodix@14 {
+		compatible = "goodix,gt1151";
+		reg = <0x14>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB5 IRQ_TYPE_EDGE_FALLING>;
+		AVDD28-supply = <&vcc3v3_lcd0_n>;
+		irq-gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_int &touch_rst>;
+		reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
+		VDDIO-supply = <&vcc3v3_lcd0_n>;
+	};
+};
+
+&i2s1_8ch {
+	rockchip,trcm-sync-tx-only;
+	status = "okay";
+};
+
 &mdio0 {
 	rgmii_phy0: ethernet-phy@0 {
 		compatible = "ethernet-phy-ieee802.3-c22";
@@ -339,12 +472,42 @@
 };
 
 &pinctrl {
+	display {
+		vcc3v3_lcd0_n_en: vcc3v3_lcd0_n_en {
+			rockchip,pins = <0 RK_PC7 0 &pcfg_pull_none>;
+		};
+		vcc3v3_lcd1_n_en: vcc3v3_lcd1_n_en {
+			rockchip,pins = <0 RK_PC5 0 &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		led_work_en: led_work_en {
+			rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	pmic {
 		pmic_int: pmic_int {
 			rockchip,pins =
 				<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
+
+	touchscreen {
+		touch_int: touch_int {
+			rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+		touch_rst: touch_rst {
+			rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		vcc5v0_usb_host_en: vcc5v0_usb_host_en {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
 };
 
 &pmu_io_domains {
@@ -387,6 +550,42 @@
 	status = "okay";
 };
 
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
 &uart2 {
 	status = "okay";
 };
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb2phy1 {
+	status = "okay";
+};
+
+&usb2phy1_host {
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
+
+&usb2phy1_otg {
+	phy-supply = <&vcc5v0_usb_host>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568.dtsi b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
index 2fd313a295f8..5b0f528d6818 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
@@ -8,6 +8,11 @@
 / {
 	compatible = "rockchip,rk3568";
 
+	pipe_phy_grf0: syscon@fdc70000 {
+		compatible = "rockchip,rk3568-pipe-phy-grf", "syscon";
+		reg = <0x0 0xfdc70000 0x0 0x1000>;
+	};
+
 	qos_pcie3x1: qos@fe190080 {
 		compatible = "rockchip,rk3568-qos", "syscon";
 		reg = <0x0 0xfe190080 0x0 0x20>;
@@ -32,13 +37,11 @@
 		clocks = <&cru SCLK_GMAC0>, <&cru SCLK_GMAC0_RX_TX>,
 			 <&cru SCLK_GMAC0_RX_TX>, <&cru CLK_MAC0_REFOUT>,
 			 <&cru ACLK_GMAC0>, <&cru PCLK_GMAC0>,
-			 <&cru SCLK_GMAC0_RX_TX>, <&cru CLK_GMAC0_PTP_REF>,
-			 <&cru PCLK_XPCS>;
+			 <&cru SCLK_GMAC0_RX_TX>, <&cru CLK_GMAC0_PTP_REF>;
 		clock-names = "stmmaceth", "mac_clk_rx",
 			      "mac_clk_tx", "clk_mac_refout",
 			      "aclk_mac", "pclk_mac",
-			      "clk_mac_speed", "ptp_ref",
-			      "pclk_xpcs";
+			      "clk_mac_speed", "ptp_ref";
 		resets = <&cru SRST_A_GMAC0>;
 		reset-names = "stmmaceth";
 		rockchip,grf = <&grf>;
@@ -71,6 +74,22 @@
 			queue0 {};
 		};
 	};
+
+	combphy0: phy@fe820000 {
+		compatible = "rockchip,rk3568-naneng-combphy";
+		reg = <0x0 0xfe820000 0x0 0x100>;
+		clocks = <&pmucru CLK_PCIEPHY0_REF>,
+			 <&cru PCLK_PIPEPHY0>,
+			 <&cru PCLK_PIPE>;
+		clock-names = "ref", "apb", "pipe";
+		assigned-clocks = <&pmucru CLK_PCIEPHY0_REF>;
+		assigned-clock-rates = <100000000>;
+		resets = <&cru SRST_PIPEPHY0>;
+		rockchip,pipe-grf = <&pipegrf>;
+		rockchip,pipe-phy-grf = <&pipe_phy_grf0>;
+		#phy-cells = <1>;
+		status = "disabled";
+	};
 };
 
 &cpu0_opp_table {
diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
index a68033a23975..7cdef800cb3c 100644
--- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
@@ -144,6 +144,40 @@
 		};
 	};
 
+	gpu_opp_table: opp-table-1 {
+		compatible = "operating-points-v2";
+
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <825000>;
+		};
+
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <825000>;
+		};
+
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <825000>;
+		};
+
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <825000>;
+		};
+
+		opp-700000000 {
+			opp-hz = /bits/ 64 <700000000>;
+			opp-microvolt = <900000>;
+		};
+
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1000000>;
+		};
+	};
+
 	pmu {
 		compatible = "arm,cortex-a55-pmu";
 		interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>,
@@ -208,6 +242,50 @@
 		msi-controller;
 	};
 
+	usb_host0_ehci: usb@fd800000 {
+		compatible = "generic-ehci";
+		reg = <0x0 0xfd800000 0x0 0x40000>;
+		interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_USB2HOST0>, <&cru HCLK_USB2HOST0_ARB>,
+			 <&cru PCLK_USB>;
+		phys = <&usb2phy1_otg>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	usb_host0_ohci: usb@fd840000 {
+		compatible = "generic-ohci";
+		reg = <0x0 0xfd840000 0x0 0x40000>;
+		interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_USB2HOST0>, <&cru HCLK_USB2HOST0_ARB>,
+			 <&cru PCLK_USB>;
+		phys = <&usb2phy1_otg>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	usb_host1_ehci: usb@fd880000 {
+		compatible = "generic-ehci";
+		reg = <0x0 0xfd880000 0x0 0x40000>;
+		interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_USB2HOST1>, <&cru HCLK_USB2HOST1_ARB>,
+			 <&cru PCLK_USB>;
+		phys = <&usb2phy1_host>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
+	usb_host1_ohci: usb@fd8c0000 {
+		compatible = "generic-ohci";
+		reg = <0x0 0xfd8c0000 0x0 0x40000>;
+		interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_USB2HOST1>, <&cru HCLK_USB2HOST1_ARB>,
+			 <&cru PCLK_USB>;
+		phys = <&usb2phy1_host>;
+		phy-names = "usb";
+		status = "disabled";
+	};
+
 	pmugrf: syscon@fdc20000 {
 		compatible = "rockchip,rk3568-pmugrf", "syscon", "simple-mfd";
 		reg = <0x0 0xfdc20000 0x0 0x10000>;
@@ -218,11 +296,36 @@
 		};
 	};
 
+	pipegrf: syscon@fdc50000 {
+		compatible = "rockchip,rk3568-pipe-grf", "syscon";
+		reg = <0x0 0xfdc50000 0x0 0x1000>;
+	};
+
 	grf: syscon@fdc60000 {
 		compatible = "rockchip,rk3568-grf", "syscon", "simple-mfd";
 		reg = <0x0 0xfdc60000 0x0 0x10000>;
 	};
 
+	pipe_phy_grf1: syscon@fdc80000 {
+		compatible = "rockchip,rk3568-pipe-phy-grf", "syscon";
+		reg = <0x0 0xfdc80000 0x0 0x1000>;
+	};
+
+	pipe_phy_grf2: syscon@fdc90000 {
+		compatible = "rockchip,rk3568-pipe-phy-grf", "syscon";
+		reg = <0x0 0xfdc90000 0x0 0x1000>;
+	};
+
+	usb2phy0_grf: syscon@fdca0000 {
+		compatible = "rockchip,rk3568-usb2phy-grf", "syscon";
+		reg = <0x0 0xfdca0000 0x0 0x8000>;
+	};
+
+	usb2phy1_grf: syscon@fdca8000 {
+		compatible = "rockchip,rk3568-usb2phy-grf", "syscon";
+		reg = <0x0 0xfdca8000 0x0 0x8000>;
+	};
+
 	pmucru: clock-controller@fdd00000 {
 		compatible = "rockchip,rk3568-pmucru";
 		reg = <0x0 0xfdd00000 0x0 0x1000>;
@@ -390,6 +493,21 @@
 		};
 	};
 
+	gpu: gpu@fde60000 {
+		compatible = "rockchip,rk3568-mali", "arm,mali-bifrost";
+		reg = <0x0 0xfde60000 0x0 0x4000>;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "job", "mmu", "gpu";
+		clocks = <&scmi_clk 1>, <&cru CLK_GPU>;
+		clock-names = "gpu", "bus";
+		#cooling-cells = <2>;
+		operating-points-v2 = <&gpu_opp_table>;
+		power-domains = <&power RK3568_PD_GPU>;
+		status = "disabled";
+	};
+
 	sdmmc2: mmc@fe000000 {
 		compatible = "rockchip,rk3568-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x0 0xfe000000 0x0 0x4000>;
@@ -651,7 +769,44 @@
 		status = "disabled";
 	};
 
-	dmac0: dmac@fe530000 {
+	i2s3_2ch: i2s@fe430000 {
+		compatible = "rockchip,rk3568-i2s-tdm";
+		reg = <0x0 0xfe430000 0x0 0x1000>;
+		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru MCLK_I2S3_2CH_TX>, <&cru MCLK_I2S3_2CH_RX>,
+			 <&cru HCLK_I2S3_2CH>;
+		clock-names = "mclk_tx", "mclk_rx", "hclk";
+		dmas = <&dmac1 6>, <&dmac1 7>;
+		dma-names = "tx", "rx";
+		resets = <&cru SRST_M_I2S3_2CH_TX>, <&cru SRST_M_I2S3_2CH_RX>;
+		reset-names = "tx-m", "rx-m";
+		rockchip,grf = <&grf>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	pdm: pdm@fe440000 {
+		compatible = "rockchip,rk3568-pdm";
+		reg = <0x0 0xfe440000 0x0 0x1000>;
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru MCLK_PDM>, <&cru HCLK_PDM>;
+		clock-names = "pdm_clk", "pdm_hclk";
+		dmas = <&dmac1 9>;
+		dma-names = "rx";
+		pinctrl-0 = <&pdmm0_clk
+			     &pdmm0_clk1
+			     &pdmm0_sdi0
+			     &pdmm0_sdi1
+			     &pdmm0_sdi2
+			     &pdmm0_sdi3>;
+		pinctrl-names = "default";
+		resets = <&cru SRST_M_PDM>;
+		reset-names = "pdm-m";
+		#sound-dai-cells = <0>;
+		status = "disabled";
+	};
+
+	dmac0: dma-controller@fe530000 {
 		compatible = "arm,pl330", "arm,primecell";
 		reg = <0x0 0xfe530000 0x0 0x4000>;
 		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
@@ -662,7 +817,7 @@
 		#dma-cells = <1>;
 	};
 
-	dmac1: dmac@fe550000 {
+	dmac1: dma-controller@fe550000 {
 		compatible = "arm,pl330", "arm,primecell";
 		reg = <0x0 0xfe550000 0x0 0x4000>;
 		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
@@ -974,6 +1129,32 @@
 			polling-delay = <1000>; /* milliseconds */
 
 			thermal-sensors = <&tsadc 1>;
+
+			trips {
+				gpu_threshold: gpu-threshold {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				gpu_target: gpu-target {
+					temperature = <75000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				gpu_crit: gpu-crit {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_target>;
+					cooling-device =
+						<&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
 		};
 	};
 
@@ -1141,6 +1322,82 @@
 		status = "disabled";
 	};
 
+	combphy1: phy@fe830000 {
+		compatible = "rockchip,rk3568-naneng-combphy";
+		reg = <0x0 0xfe830000 0x0 0x100>;
+		clocks = <&pmucru CLK_PCIEPHY1_REF>,
+			 <&cru PCLK_PIPEPHY1>,
+			 <&cru PCLK_PIPE>;
+		clock-names = "ref", "apb", "pipe";
+		assigned-clocks = <&pmucru CLK_PCIEPHY1_REF>;
+		assigned-clock-rates = <100000000>;
+		resets = <&cru SRST_PIPEPHY1>;
+		rockchip,pipe-grf = <&pipegrf>;
+		rockchip,pipe-phy-grf = <&pipe_phy_grf1>;
+		#phy-cells = <1>;
+		status = "disabled";
+	};
+
+	combphy2: phy@fe840000 {
+		compatible = "rockchip,rk3568-naneng-combphy";
+		reg = <0x0 0xfe840000 0x0 0x100>;
+		clocks = <&pmucru CLK_PCIEPHY2_REF>,
+			 <&cru PCLK_PIPEPHY2>,
+			 <&cru PCLK_PIPE>;
+		clock-names = "ref", "apb", "pipe";
+		assigned-clocks = <&pmucru CLK_PCIEPHY2_REF>;
+		assigned-clock-rates = <100000000>;
+		resets = <&cru SRST_PIPEPHY2>;
+		rockchip,pipe-grf = <&pipegrf>;
+		rockchip,pipe-phy-grf = <&pipe_phy_grf2>;
+		#phy-cells = <1>;
+		status = "disabled";
+	};
+
+	usb2phy0: usb2phy@fe8a0000 {
+		compatible = "rockchip,rk3568-usb2phy";
+		reg = <0x0 0xfe8a0000 0x0 0x10000>;
+		clocks = <&pmucru CLK_USBPHY0_REF>;
+		clock-names = "phyclk";
+		clock-output-names = "clk_usbphy0_480m";
+		interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+		rockchip,usbgrf = <&usb2phy0_grf>;
+		#clock-cells = <0>;
+		status = "disabled";
+
+		usb2phy0_host: host-port {
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		usb2phy0_otg: otg-port {
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+	};
+
+	usb2phy1: usb2phy@fe8b0000 {
+		compatible = "rockchip,rk3568-usb2phy";
+		reg = <0x0 0xfe8b0000 0x0 0x10000>;
+		clocks = <&pmucru CLK_USBPHY1_REF>;
+		clock-names = "phyclk";
+		clock-output-names = "clk_usbphy1_480m";
+		interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+		rockchip,usbgrf = <&usb2phy1_grf>;
+		#clock-cells = <0>;
+		status = "disabled";
+
+		usb2phy1_host: host-port {
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		usb2phy1_otg: otg-port {
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+	};
+
 	pinctrl: pinctrl {
 		compatible = "rockchip,rk3568-pinctrl";
 		rockchip,grf = <&grf>;
diff --git a/arch/arm64/boot/dts/tesla/Makefile b/arch/arm64/boot/dts/tesla/Makefile
new file mode 100644
index 000000000000..a1ee50e2fd06
--- /dev/null
+++ b/arch/arm64/boot/dts/tesla/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_TESLA_FSD) += \
+	fsd-evb.dtb
diff --git a/arch/arm64/boot/dts/tesla/fsd-evb.dts b/arch/arm64/boot/dts/tesla/fsd-evb.dts
new file mode 100644
index 000000000000..5af560c1b5e6
--- /dev/null
+++ b/arch/arm64/boot/dts/tesla/fsd-evb.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Tesla FSD board device tree source
+ *
+ * Copyright (c) 2017-2021 Samsung Electronics Co., Ltd.
+ *		https://www.samsung.com
+ * Copyright (c) 2017-2021 Tesla, Inc.
+ *		https://www.tesla.com
+ */
+
+/dts-v1/;
+#include "fsd.dtsi"
+
+/ {
+	model = "Tesla Full Self-Driving (FSD) Evaluation board";
+	compatible = "tesla,fsd-evb", "tesla,fsd";
+
+	aliases {
+		serial0 = &serial_0;
+		serial1 = &serial_1;
+	};
+
+	chosen {
+		stdout-path = &serial_0;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x2 0x00000000>;
+	};
+};
+
+&fin_pll {
+	clock-frequency = <24000000>;
+};
+
+&serial_0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi b/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi
new file mode 100644
index 000000000000..d4d0cb005712
--- /dev/null
+++ b/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi
@@ -0,0 +1,335 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Tesla Full Self-Driving SoC device tree source
+ *
+ * Copyright (c) 2017-2021 Samsung Electronics Co., Ltd.
+ *		https://www.samsung.com
+ * Copyright (c) 2017-2021 Tesla, Inc.
+ *		https://www.tesla.com
+ */
+
+#include <dt-bindings/pinctrl/samsung.h>
+
+&pinctrl_fsys0 {
+	gpf0: gpf0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf6: gpf6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf4: gpf4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf5: gpf5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_peric {
+	gpc8: gpc8-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf2: gpf2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf3: gpf3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd0: gpd0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb0: gpb0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb1: gpb1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb4: gpb4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb5: gpb5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb6: gpb6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb7: gpb7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd1: gpd1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd2: gpd2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd3: gpd3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg0: gpg0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg1: gpg1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg2: gpg2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg3: gpg3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg4: gpg4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg5: gpg5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg6: gpg6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg7: gpg7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	pwm0_out: pwm0-out-pins {
+		samsung,pins = "gpb6-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV2>;
+	};
+
+	pwm1_out: pwm1-out-pins {
+		samsung,pins = "gpb6-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV2>;
+	};
+
+	hs_i2c0_bus: hs-i2c0-bus-pins {
+		samsung,pins = "gpb0-0", "gpb0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	hs_i2c1_bus: hs-i2c1-bus-pins {
+		samsung,pins = "gpb0-2", "gpb0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	hs_i2c2_bus: hs-i2c2-bus-pins {
+		samsung,pins = "gpb0-4", "gpb0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	hs_i2c3_bus: hs-i2c3-bus-pins {
+		samsung,pins = "gpb0-6", "gpb0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	hs_i2c4_bus: hs-i2c4-bus-pins {
+		samsung,pins = "gpb1-0", "gpb1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	hs_i2c5_bus: hs-i2c5-bus-pins {
+		samsung,pins = "gpb1-2", "gpb1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	hs_i2c6_bus: hs-i2c6-bus-pins {
+		samsung,pins = "gpb1-4", "gpb1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	hs_i2c7_bus: hs-i2c7-bus-pins {
+		samsung,pins = "gpb1-6", "gpb1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart0_data: uart0-data-pins {
+		samsung,pins = "gpb7-0", "gpb7-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart1_data: uart1-data-pins {
+		samsung,pins = "gpb7-4", "gpb7-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	spi0_bus: spi0-bus-pins {
+		samsung,pins = "gpb4-0", "gpb4-2", "gpb4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	spi1_bus: spi1-bus-pins {
+		samsung,pins = "gpb4-4", "gpb4-6", "gpb4-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	spi2_bus: spi2-bus-pins {
+		samsung,pins = "gpb5-0", "gpb5-2", "gpb5-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_pmu {
+	gpq0: gpq0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
diff --git a/arch/arm64/boot/dts/tesla/fsd.dtsi b/arch/arm64/boot/dts/tesla/fsd.dtsi
new file mode 100644
index 000000000000..9a652abcbcac
--- /dev/null
+++ b/arch/arm64/boot/dts/tesla/fsd.dtsi
@@ -0,0 +1,754 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Tesla Full Self-Driving SoC device tree source
+ *
+ * Copyright (c) 2017-2022 Samsung Electronics Co., Ltd.
+ *		https://www.samsung.com
+ * Copyright (c) 2017-2022 Tesla, Inc.
+ *		https://www.tesla.com
+ */
+
+#include <dt-bindings/clock/fsd-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "tesla,fsd";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		i2c0 = &hsi2c_0;
+		i2c1 = &hsi2c_1;
+		i2c2 = &hsi2c_2;
+		i2c3 = &hsi2c_3;
+		i2c4 = &hsi2c_4;
+		i2c5 = &hsi2c_5;
+		i2c6 = &hsi2c_6;
+		i2c7 = &hsi2c_7;
+		pinctrl0 = &pinctrl_fsys0;
+		pinctrl1 = &pinctrl_peric;
+		pinctrl2 = &pinctrl_pmu;
+		spi0 = &spi_0;
+		spi1 = &spi_1;
+		spi2 = &spi_2;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpucl0_0>;
+				};
+				core1 {
+					cpu = <&cpucl0_1>;
+				};
+				core2 {
+					cpu = <&cpucl0_2>;
+				};
+				core3 {
+					cpu = <&cpucl0_3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpucl1_0>;
+				};
+				core1 {
+					cpu = <&cpucl1_1>;
+				};
+				core2 {
+					cpu = <&cpucl1_2>;
+				};
+				core3 {
+					cpu = <&cpucl1_3>;
+				};
+			};
+
+			cluster2 {
+				core0 {
+					cpu = <&cpucl2_0>;
+				};
+				core1 {
+					cpu = <&cpucl2_1>;
+				};
+				core2 {
+					cpu = <&cpucl2_2>;
+				};
+				core3 {
+					cpu = <&cpucl2_3>;
+				};
+			};
+		};
+
+		/* Cluster 0 */
+		cpucl0_0: cpu@0 {
+				device_type = "cpu";
+				compatible = "arm,cortex-a72";
+				reg = <0x0 0x000>;
+				enable-method = "psci";
+				clock-frequency = <2400000000>;
+				cpu-idle-states = <&CPU_SLEEP>;
+		};
+
+		cpucl0_1: cpu@1 {
+				device_type = "cpu";
+				compatible = "arm,cortex-a72";
+				reg = <0x0 0x001>;
+				enable-method = "psci";
+				clock-frequency = <2400000000>;
+				cpu-idle-states = <&CPU_SLEEP>;
+		};
+
+		cpucl0_2: cpu@2 {
+				device_type = "cpu";
+				compatible = "arm,cortex-a72";
+				reg = <0x0 0x002>;
+				enable-method = "psci";
+				clock-frequency = <2400000000>;
+				cpu-idle-states = <&CPU_SLEEP>;
+		};
+
+		cpucl0_3: cpu@3 {
+				device_type = "cpu";
+				compatible = "arm,cortex-a72";
+				reg = <0x0 0x003>;
+				enable-method = "psci";
+				cpu-idle-states = <&CPU_SLEEP>;
+		};
+
+		/* Cluster 1 */
+		cpucl1_0: cpu@100 {
+				device_type = "cpu";
+				compatible = "arm,cortex-a72";
+				reg = <0x0 0x100>;
+				enable-method = "psci";
+				clock-frequency = <2400000000>;
+				cpu-idle-states = <&CPU_SLEEP>;
+		};
+
+		cpucl1_1: cpu@101 {
+				device_type = "cpu";
+				compatible = "arm,cortex-a72";
+				reg = <0x0 0x101>;
+				enable-method = "psci";
+				clock-frequency = <2400000000>;
+				cpu-idle-states = <&CPU_SLEEP>;
+		};
+
+		cpucl1_2: cpu@102 {
+				device_type = "cpu";
+				compatible = "arm,cortex-a72";
+				reg = <0x0 0x102>;
+				enable-method = "psci";
+				clock-frequency = <2400000000>;
+				cpu-idle-states = <&CPU_SLEEP>;
+		};
+
+		cpucl1_3: cpu@103 {
+				device_type = "cpu";
+				compatible = "arm,cortex-a72";
+				reg = <0x0 0x103>;
+				enable-method = "psci";
+				clock-frequency = <2400000000>;
+				cpu-idle-states = <&CPU_SLEEP>;
+		};
+
+		/* Cluster 2 */
+		cpucl2_0: cpu@200 {
+				device_type = "cpu";
+				compatible = "arm,cortex-a72";
+				reg = <0x0 0x200>;
+				enable-method = "psci";
+				clock-frequency = <2400000000>;
+				cpu-idle-states = <&CPU_SLEEP>;
+		};
+
+		cpucl2_1: cpu@201 {
+				device_type = "cpu";
+				compatible = "arm,cortex-a72";
+				reg = <0x0 0x201>;
+				enable-method = "psci";
+				clock-frequency = <2400000000>;
+				cpu-idle-states = <&CPU_SLEEP>;
+		};
+
+		cpucl2_2: cpu@202 {
+				device_type = "cpu";
+				compatible = "arm,cortex-a72";
+				reg = <0x0 0x202>;
+				enable-method = "psci";
+				clock-frequency = <2400000000>;
+				cpu-idle-states = <&CPU_SLEEP>;
+		};
+
+		cpucl2_3: cpu@203 {
+				device_type = "cpu";
+				compatible = "arm,cortex-a72";
+				reg = <0x0 0x203>;
+				enable-method = "psci";
+				clock-frequency = <2400000000>;
+				cpu-idle-states = <&CPU_SLEEP>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			CPU_SLEEP: cpu-sleep {
+				idle-state-name = "c2";
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x0010000>;
+				entry-latency-us = <30>;
+				exit-latency-us = <75>;
+				min-residency-us = <300>;
+			};
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 386 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpucl0_0>, <&cpucl0_1>, <&cpucl0_2>,
+				     <&cpucl0_3>, <&cpucl1_0>, <&cpucl1_1>,
+				     <&cpucl1_2>, <&cpucl1_3>, <&cpucl2_0>,
+				     <&cpucl2_1>, <&cpucl2_2>, <&cpucl2_3>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	fin_pll: clock {
+		compatible = "fixed-clock";
+		clock-output-names = "fin_pll";
+		#clock-cells = <0>;
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x0 0x0 0x0 0x0 0x0 0x18000000>;
+		dma-ranges = <0x0 0x0 0x0 0x0 0x10 0x0>;
+
+		gic: interrupt-controller@10400000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg =	<0x0 0x10400000 0x0 0x10000>, /* GICD */
+				<0x0 0x10600000 0x0 0x200000>; /* GICR_RD+GICR_SGI */
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		smmu_imem: iommu@10200000 {
+			compatible = "arm,mmu-500";
+			reg = <0x0 0x10200000 0x0 0x10000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <7>;
+			interrupts = <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, /* Global secure fault */
+				     <GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>, /* Global non-secure fault */
+				     <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>, /* Combined secure interrupt */
+				     <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>, /* Combined non-secure interrupt */
+				     /* Performance counter interrupts */
+				     <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>, /* for FSYS1_0 */
+				     <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>, /* for FSYS1_1 */
+				     <GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>, /* for IMEM_0  */
+				     /* Per context non-secure context interrupts, 0-3 interrupts */
+				     <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_0 */
+				     <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_1 */
+				     <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_2 */
+				     <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>; /* for CONTEXT_3 */
+		};
+
+		smmu_isp: iommu@12100000 {
+			compatible = "arm,mmu-500";
+			reg = <0x0 0x12100000 0x0 0x10000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <11>;
+			interrupts = <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>, /* Global secure fault */
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>, /* Global non-secure fault */
+				     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>, /* Combined secure interrupt */
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, /* Combined non-secure interrupt */
+				     /* Performance counter interrupts */
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>, /* for CAM_CSI   */
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, /* for CAM_DP_0  */
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>, /* for CAM_DP_1  */
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>, /* for CAM_ISP_0 */
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>, /* for CAM_ISP_1 */
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>, /* for CAM_MFC_0 */
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, /* for CAM_MFC_1 */
+				     /* Per context non-secure context interrupts, 0-7 interrupts */
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_0 */
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_1 */
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_2 */
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_3 */
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_4 */
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_5 */
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_6 */
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>; /* for CONTEXT_7 */
+		};
+
+		smmu_peric: iommu@14900000 {
+			compatible = "arm,mmu-500";
+			reg = <0x0 0x14900000 0x0 0x10000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <5>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>, /* Global secure fault */
+				     <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, /* Global non-secure fault */
+				     <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>, /* Combined secure interrupt */
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, /* Combined non-secure interrupt */
+				     /* Performance counter interrupts */
+				     <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, /* for PERIC */
+				     /* Per context non-secure context interrupts, 0-1 interrupts */
+				     <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_0 */
+				     <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>; /* for CONTEXT_1 */
+		};
+
+		smmu_fsys0: iommu@15450000 {
+			compatible = "arm,mmu-500";
+			reg = <0x0 0x15450000 0x0 0x10000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <5>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, /* Global secure fault */
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, /* Global non-secure fault */
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, /* Combined secure interrupt */
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, /* Combined non-secure interrupt */
+				     /* Performance counter interrupts */
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, /* for FSYS0   */
+				     /* Per context non-secure context interrupts, 0-1 interrupts */
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, /* for CONTEXT_0 */
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; /* for CONTEXT_1 */
+		};
+
+		clock_imem: clock-controller@10010000 {
+			compatible = "tesla,fsd-clock-imem";
+			reg = <0x0 0x10010000 0x0 0x3000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				<&clock_cmu DOUT_CMU_IMEM_TCUCLK>,
+				<&clock_cmu DOUT_CMU_IMEM_ACLK>,
+				<&clock_cmu DOUT_CMU_IMEM_DMACLK>;
+			clock-names = "fin_pll",
+				"dout_cmu_imem_tcuclk",
+				"dout_cmu_imem_aclk",
+				"dout_cmu_imem_dmaclk";
+		};
+
+		clock_cmu: clock-controller@11c10000 {
+			compatible = "tesla,fsd-clock-cmu";
+			reg = <0x0 0x11c10000 0x0 0x3000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>;
+			clock-names = "fin_pll";
+		};
+
+		clock_csi: clock-controller@12610000 {
+			compatible = "tesla,fsd-clock-cam_csi";
+			reg = <0x0 0x12610000 0x0 0x3000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>;
+			clock-names = "fin_pll";
+		};
+
+		clock_mfc: clock-controller@12810000 {
+			compatible = "tesla,fsd-clock-mfc";
+			reg = <0x0 0x12810000 0x0 0x3000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>;
+			clock-names = "fin_pll";
+		};
+
+		clock_peric: clock-controller@14010000 {
+			compatible = "tesla,fsd-clock-peric";
+			reg = <0x0 0x14010000 0x0 0x3000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				<&clock_cmu DOUT_CMU_PLL_SHARED0_DIV4>,
+				<&clock_cmu DOUT_CMU_PERIC_SHARED1DIV36>,
+				<&clock_cmu DOUT_CMU_PERIC_SHARED0DIV3_TBUCLK>,
+				<&clock_cmu DOUT_CMU_PERIC_SHARED0DIV20>,
+				<&clock_cmu DOUT_CMU_PERIC_SHARED1DIV4_DMACLK>;
+			clock-names = "fin_pll",
+				"dout_cmu_pll_shared0_div4",
+				"dout_cmu_peric_shared1div36",
+				"dout_cmu_peric_shared0div3_tbuclk",
+				"dout_cmu_peric_shared0div20",
+				"dout_cmu_peric_shared1div4_dmaclk";
+		};
+
+		clock_fsys0: clock-controller@15010000 {
+			compatible = "tesla,fsd-clock-fsys0";
+			reg = <0x0 0x15010000 0x0 0x3000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				<&clock_cmu DOUT_CMU_PLL_SHARED0_DIV6>,
+				<&clock_cmu DOUT_CMU_FSYS0_SHARED1DIV4>,
+				<&clock_cmu DOUT_CMU_FSYS0_SHARED0DIV4>;
+			clock-names = "fin_pll",
+				"dout_cmu_pll_shared0_div6",
+				"dout_cmu_fsys0_shared1div4",
+				"dout_cmu_fsys0_shared0div4";
+		};
+
+		clock_fsys1: clock-controller@16810000 {
+			compatible = "tesla,fsd-clock-fsys1";
+			reg = <0x0 0x16810000 0x0 0x3000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				<&clock_cmu DOUT_CMU_FSYS1_SHARED0DIV8>,
+				<&clock_cmu DOUT_CMU_FSYS1_SHARED0DIV4>;
+			clock-names = "fin_pll",
+				"dout_cmu_fsys1_shared0div8",
+				"dout_cmu_fsys1_shared0div4";
+		};
+
+		mdma0: dma-controller@10100000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x0 0x10100000 0x0 0x1000>;
+			interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
+			clocks = <&clock_imem IMEM_DMA0_IPCLKPORT_ACLK>;
+			clock-names = "apb_pclk";
+			iommus = <&smmu_imem 0x800 0x0>;
+		};
+
+		mdma1: dma-controller@10110000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x0 0x10110000 0x0 0x1000>;
+			interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
+			clocks = <&clock_imem IMEM_DMA1_IPCLKPORT_ACLK>;
+			clock-names = "apb_pclk";
+			iommus = <&smmu_imem 0x801 0x0>;
+		};
+
+		pdma0: dma-controller@14280000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x0 0x14280000 0x0 0x1000>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
+			clocks = <&clock_peric PERIC_DMA0_IPCLKPORT_ACLK>;
+			clock-names = "apb_pclk";
+			iommus = <&smmu_peric 0x2 0x0>;
+		};
+
+		pdma1: dma-controller@14290000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x0 0x14290000 0x0 0x1000>;
+			interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
+			clocks = <&clock_peric PERIC_DMA1_IPCLKPORT_ACLK>;
+			clock-names = "apb_pclk";
+			iommus = <&smmu_peric 0x1 0x0>;
+		};
+
+		serial_0: serial@14180000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x0 0x14180000 0x0 0x100>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma1 1>, <&pdma1 0>;
+			dma-names = "rx", "tx";
+			clocks = <&clock_peric PERIC_PCLK_UART0>,
+				 <&clock_peric PERIC_SCLK_UART0>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		serial_1: serial@14190000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x0 0x14190000 0x0 0x100>;
+			interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma1 3>, <&pdma1 2>;
+			dma-names = "rx", "tx";
+			clocks = <&clock_peric PERIC_PCLK_UART1>,
+				 <&clock_peric PERIC_SCLK_UART1>;
+			clock-names = "uart", "clk_uart_baud0";
+			status = "disabled";
+		};
+
+		pmu_system_controller: system-controller@11400000 {
+			compatible = "samsung,exynos7-pmu", "syscon";
+			reg = <0x0 0x11400000 0x0 0x5000>;
+		};
+
+		watchdog_0: watchdog@100a0000 {
+			compatible = "samsung,exynos7-wdt";
+			reg = <0x0 0x100a0000 0x0 0x100>;
+			interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>;
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			clocks = <&fin_pll>;
+			clock-names = "watchdog";
+		};
+
+		watchdog_1: watchdog@100b0000 {
+			compatible = "samsung,exynos7-wdt";
+			reg = <0x0 0x100b0000 0x0 0x100>;
+			interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>;
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			clocks = <&fin_pll>;
+			clock-names = "watchdog";
+		};
+
+		watchdog_2: watchdog@100c0000 {
+			compatible = "samsung,exynos7-wdt";
+			reg = <0x0 0x100c0000 0x0 0x100>;
+			interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>;
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			clocks = <&fin_pll>;
+			clock-names = "watchdog";
+		};
+
+		pwm_0: pwm@14100000 {
+			compatible = "samsung,exynos4210-pwm";
+			reg = <0x0 0x14100000 0x0 0x100>;
+			samsung,pwm-outputs = <0>, <1>, <2>, <3>;
+			#pwm-cells = <3>;
+			clocks = <&clock_peric PERIC_PWM0_IPCLKPORT_I_PCLK_S0>;
+			clock-names = "timers";
+			status = "disabled";
+		};
+
+		pwm_1: pwm@14110000 {
+			compatible = "samsung,exynos4210-pwm";
+			reg = <0x0 0x14110000 0x0 0x100>;
+			samsung,pwm-outputs = <0>, <1>, <2>, <3>;
+			#pwm-cells = <3>;
+			clocks = <&clock_peric PERIC_PWM1_IPCLKPORT_I_PCLK_S0>;
+			clock-names = "timers";
+			status = "disabled";
+		};
+
+		hsi2c_0: i2c@14200000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x0 0x14200000 0x0 0x1000>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c0_bus>;
+			clocks = <&clock_peric PERIC_PCLK_HSI2C0>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_1: i2c@14210000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x0 0x14210000 0x0 0x1000>;
+			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c1_bus>;
+			clocks = <&clock_peric PERIC_PCLK_HSI2C1>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_2: i2c@14220000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x0 0x14220000 0x0 0x1000>;
+			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c2_bus>;
+			clocks = <&clock_peric PERIC_PCLK_HSI2C2>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_3: i2c@14230000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x0 0x14230000 0x0 0x1000>;
+			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c3_bus>;
+			clocks = <&clock_peric PERIC_PCLK_HSI2C3>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_4: i2c@14240000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x0 0x14240000 0x0 0x1000>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c4_bus>;
+			clocks = <&clock_peric PERIC_PCLK_HSI2C4>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_5: i2c@14250000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x0 0x14250000 0x0 0x1000>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c5_bus>;
+			clocks = <&clock_peric PERIC_PCLK_HSI2C5>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_6: i2c@14260000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x0 0x14260000 0x0 0x1000>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c6_bus>;
+			clocks = <&clock_peric PERIC_PCLK_HSI2C6>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_7: i2c@14270000 {
+			compatible = "samsung,exynos7-hsi2c";
+			reg = <0x0 0x14270000 0x0 0x1000>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hs_i2c7_bus>;
+			clocks = <&clock_peric PERIC_PCLK_HSI2C7>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		pinctrl_pmu: pinctrl@114f0000 {
+			compatible = "tesla,fsd-pinctrl";
+			reg = <0x0 0x114f0000 0x0 0x1000>;
+		};
+
+		pinctrl_peric: pinctrl@141f0000 {
+			compatible = "tesla,fsd-pinctrl";
+			reg = <0x0 0x141f0000 0x0 0x1000>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_fsys0: pinctrl@15020000 {
+			compatible = "tesla,fsd-pinctrl";
+			reg = <0x0 0x15020000 0x0 0x1000>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		spi_0: spi@14140000 {
+			compatible = "tesla,fsd-spi";
+			reg = <0x0 0x14140000 0x0 0x100>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma1 4>, <&pdma1 5>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock_peric PERIC_PCLK_SPI0>,
+				<&clock_peric PERIC_SCLK_SPI0>;
+			clock-names = "spi", "spi_busclk0";
+			samsung,spi-src-clk = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0_bus>;
+			num-cs = <1>;
+			status = "disabled";
+		};
+
+		spi_1: spi@14150000 {
+			compatible = "tesla,fsd-spi";
+			reg = <0x0 0x14150000 0x0 0x100>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma1 6>, <&pdma1 7>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock_peric PERIC_PCLK_SPI1>,
+				<&clock_peric PERIC_SCLK_SPI1>;
+			clock-names = "spi", "spi_busclk0";
+			samsung,spi-src-clk = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_bus>;
+			num-cs = <1>;
+			status = "disabled";
+		};
+
+		spi_2: spi@14160000 {
+			compatible = "tesla,fsd-spi";
+			reg = <0x0 0x14160000 0x0 0x100>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma1 8>, <&pdma1 9>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock_peric PERIC_PCLK_SPI2>,
+				<&clock_peric PERIC_SCLK_SPI2>;
+			clock-names = "spi", "spi_busclk0";
+			samsung,spi-src-clk = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi2_bus>;
+			num-cs = <1>;
+			status = "disabled";
+		};
+
+		timer@10040000 {
+			compatible = "samsung,exynos4210-mct";
+			reg = <0x0 0x10040000 0x0 0x800>;
+			interrupts = <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&fin_pll>, <&clock_imem IMEM_MCT_PCLK>;
+			clock-names = "fin_pll", "mct";
+		};
+	};
+};
+
+#include "fsd-pinctrl.dtsi"
diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index 90be511bc4d0..02e5d80344d0 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -21,3 +21,5 @@ dtb-$(CONFIG_ARCH_K3) += k3-j721s2-common-proc-board.dtb
 
 dtb-$(CONFIG_ARCH_K3) += k3-am642-evm.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am642-sk.dtb
+
+dtb-$(CONFIG_ARCH_K3) += k3-am625-sk.dtb
diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
new file mode 100644
index 000000000000..c68472c692f4
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
@@ -0,0 +1,267 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM625 SoC Family Main Domain peripherals
+ *
+ * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_main {
+	gic500: interrupt-controller@1800000 {
+		compatible = "arm,gic-v3";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x00 0x01800000 0x00 0x10000>,	/* GICD */
+		      <0x00 0x01880000 0x00 0xc0000>,	/* GICR */
+		      <0x00 0x01880000 0x00 0xc0000>,   /* GICR */
+		      <0x01 0x00000000 0x00 0x2000>,    /* GICC */
+		      <0x01 0x00010000 0x00 0x1000>,    /* GICH */
+		      <0x01 0x00020000 0x00 0x2000>;    /* GICV */
+		/*
+		 * vcpumntirq:
+		 * virtual CPU interface maintenance interrupt
+		 */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+		gic_its: msi-controller@1820000 {
+			compatible = "arm,gic-v3-its";
+			reg = <0x00 0x01820000 0x00 0x10000>;
+			socionext,synquacer-pre-its = <0x1000000 0x400000>;
+			msi-controller;
+			#msi-cells = <1>;
+		};
+	};
+
+	main_conf: syscon@100000 {
+		compatible = "syscon", "simple-mfd";
+		reg = <0x00 0x00100000 0x00 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x00 0x00100000 0x20000>;
+	};
+
+	dmss: bus@48000000 {
+		compatible = "simple-mfd";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dma-ranges;
+		ranges = <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>;
+
+		ti,sci-dev-id = <25>;
+
+		secure_proxy_main: mailbox@4d000000 {
+			compatible = "ti,am654-secure-proxy";
+			#mbox-cells = <1>;
+			reg-names = "target_data", "rt", "scfg";
+			reg = <0x00 0x4d000000 0x00 0x80000>,
+			      <0x00 0x4a600000 0x00 0x80000>,
+			      <0x00 0x4a400000 0x00 0x80000>;
+			interrupt-names = "rx_012";
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	dmsc: system-controller@44043000 {
+		compatible = "ti,k2g-sci";
+		ti,host-id = <12>;
+		mbox-names = "rx", "tx";
+		mboxes= <&secure_proxy_main 12>,
+			<&secure_proxy_main 13>;
+		reg-names = "debug_messages";
+		reg = <0x00 0x44043000 0x00 0xfe0>;
+
+		k3_pds: power-controller {
+			compatible = "ti,sci-pm-domain";
+			#power-domain-cells = <2>;
+		};
+
+		k3_clks: clock-controller {
+			compatible = "ti,k2g-sci-clk";
+			#clock-cells = <2>;
+		};
+
+		k3_reset: reset-controller {
+			compatible = "ti,sci-reset";
+			#reset-cells = <2>;
+		};
+	};
+
+	main_pmx0: pinctrl@f4000 {
+		compatible = "pinctrl-single";
+		reg = <0x00 0xf4000 0x00 0x2ac>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	main_uart0: serial@2800000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02800000 0x00 0x100>;
+		interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 146 0>;
+		clock-names = "fclk";
+	};
+
+	main_uart1: serial@2810000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02810000 0x00 0x100>;
+		interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 152 0>;
+		clock-names = "fclk";
+	};
+
+	main_uart2: serial@2820000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02820000 0x00 0x100>;
+		interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 153 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 153 0>;
+		clock-names = "fclk";
+	};
+
+	main_uart3: serial@2830000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02830000 0x00 0x100>;
+		interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 154 0>;
+		clock-names = "fclk";
+	};
+
+	main_uart4: serial@2840000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02840000 0x00 0x100>;
+		interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 155 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 155 0>;
+		clock-names = "fclk";
+	};
+
+	main_uart5: serial@2850000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02850000 0x00 0x100>;
+		interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 156 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 156 0>;
+		clock-names = "fclk";
+	};
+
+	main_uart6: serial@2860000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x02860000 0x00 0x100>;
+		interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 158 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 158 0>;
+		clock-names = "fclk";
+	};
+
+	main_i2c0: i2c@20000000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x20000000 0x00 0x100>;
+		interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 102 2>;
+		clock-names = "fck";
+	};
+
+	main_i2c1: i2c@20010000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x20010000 0x00 0x100>;
+		interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 103 2>;
+		clock-names = "fck";
+	};
+
+	main_i2c2: i2c@20020000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x20020000 0x00 0x100>;
+		interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 104 2>;
+		clock-names = "fck";
+	};
+
+	main_i2c3: i2c@20030000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x20030000 0x00 0x100>;
+		interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 105 2>;
+		clock-names = "fck";
+	};
+
+	main_gpio_intr: interrupt-controller@a00000 {
+		compatible = "ti,sci-intr";
+		reg = <0x00 0x00a00000 0x00 0x800>;
+		ti,intr-trigger-type = <1>;
+		interrupt-controller;
+		interrupt-parent = <&gic500>;
+		#interrupt-cells = <1>;
+		ti,sci = <&dmsc>;
+		ti,sci-dev-id = <3>;
+		ti,interrupt-ranges = <0 32 16>;
+	};
+
+	main_gpio0: gpio@600000 {
+		compatible = "ti,am64-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x00600000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <190>, <191>, <192>,
+			     <193>, <194>, <195>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <87>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 77 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 77 0>;
+		clock-names = "gpio";
+	};
+
+	main_gpio1: gpio@601000 {
+		compatible = "ti,am64-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x00601000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&main_gpio_intr>;
+		interrupts = <180>, <181>, <182>,
+			     <183>, <184>, <185>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <88>;
+		ti,davinci-gpio-unbanked = <0>;
+		power-domains = <&k3_pds 78 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 78 0>;
+		clock-names = "gpio";
+	};
+
+	hwspinlock: spinlock@2a000000 {
+		compatible = "ti,am64-hwspinlock";
+		reg = <0x00 0x2a000000 0x00 0x1000>;
+		#hwlock-cells = <1>;
+	};
+
+	mailbox0_cluster0: mailbox@29000000 {
+		compatible = "ti,am64-mailbox";
+		reg = <0x00 0x29000000 0x00 0x200>;
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+		#mbox-cells = <1>;
+		ti,mbox-num-users = <4>;
+		ti,mbox-num-fifos = <16>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi
new file mode 100644
index 000000000000..9d210d55fc71
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM625 SoC Family MCU Domain peripherals
+ *
+ * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_mcu {
+	mcu_pmx0: pinctrl@4084000 {
+		compatible = "pinctrl-single";
+		reg = <0x00 0x04084000 0x00 0x88>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	mcu_uart0: serial@4a00000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x04a00000 0x00 0x100>;
+		interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 149 0>;
+		clock-names = "fclk";
+	};
+
+	mcu_i2c0: i2c@4900000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x04900000 0x00 0x100>;
+		interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 106 2>;
+		clock-names = "fck";
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
new file mode 100644
index 000000000000..4090134676cf
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM625 SoC Family Wakeup Domain peripherals
+ *
+ * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_wakeup {
+	wkup_conf: syscon@43000000 {
+		compatible = "syscon", "simple-mfd";
+		reg = <0x00 0x43000000 0x00 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x00 0x43000000 0x20000>;
+
+		chipid: chipid@14 {
+			compatible = "ti,am654-chipid";
+			reg = <0x14 0x4>;
+		};
+	};
+
+	wkup_uart0: serial@2b300000 {
+		compatible = "ti,am64-uart", "ti,am654-uart";
+		reg = <0x00 0x2b300000 0x00 0x100>;
+		interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 114 0>;
+		clock-names = "fclk";
+	};
+
+	wkup_i2c0: i2c@2b200000 {
+		compatible = "ti,am64-i2c", "ti,omap4-i2c";
+		reg = <0x00 0x02b200000 0x00 0x100>;
+		interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 107 4>;
+		clock-names = "fck";
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62.dtsi b/arch/arm64/boot/dts/ti/k3-am62.dtsi
new file mode 100644
index 000000000000..bc2997b18556
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62.dtsi
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM62 SoC Family
+ *
+ * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/k3.h>
+#include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+/ {
+	model = "Texas Instruments K3 AM625 SoC";
+	compatible = "ti,am625";
+	interrupt-parent = <&gic500>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	chosen { };
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+
+		psci: psci {
+			compatible = "arm,psci-1.0";
+			method = "smc";
+		};
+	};
+
+	a53_timer0: timer-cl0-cpu0 {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	cbass_main: bus@f0000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ranges = <0x00 0x000f0000 0x00 0x000f0000 0x00 0x00030000>, /* Main MMRs */
+			 <0x00 0x00420000 0x00 0x00420000 0x00 0x00001000>, /* ESM0 */
+			 <0x00 0x00600000 0x00 0x00600000 0x00 0x00001100>, /* GPIO */
+			 <0x00 0x00703000 0x00 0x00703000 0x00 0x00000200>, /* USB0 debug trace */
+			 <0x00 0x0070c000 0x00 0x0070c000 0x00 0x00000200>, /* USB1 debug trace */
+			 <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* Timesync router */
+			 <0x00 0x01000000 0x00 0x01000000 0x00 0x01b28400>, /* First peripheral window */
+			 <0x00 0x08000000 0x00 0x08000000 0x00 0x00200000>, /* Main CPSW */
+			 <0x00 0x0e000000 0x00 0x0e000000 0x00 0x01d20000>, /* Second peripheral window */
+			 <0x00 0x0fd00000 0x00 0x0fd00000 0x00 0x00020000>, /* GPU */
+			 <0x00 0x20000000 0x00 0x20000000 0x00 0x0a008000>, /* Third peripheral window */
+			 <0x00 0x30040000 0x00 0x30040000 0x00 0x00080000>, /* PRUSS-M */
+			 <0x00 0x30101000 0x00 0x30101000 0x00 0x00010100>, /* CSI window */
+			 <0x00 0x30200000 0x00 0x30200000 0x00 0x00010000>, /* DSS */
+			 <0x00 0x31000000 0x00 0x31000000 0x00 0x00050000>, /* USB0 DWC3 Core window */
+			 <0x00 0x31100000 0x00 0x31100000 0x00 0x00050000>, /* USB1 DWC3 Core window */
+			 <0x00 0x43600000 0x00 0x43600000 0x00 0x00010000>, /* SA3 sproxy data */
+			 <0x00 0x44043000 0x00 0x44043000 0x00 0x00000fe0>, /* TI SCI DEBUG */
+			 <0x00 0x44860000 0x00 0x44860000 0x00 0x00040000>, /* SA3 sproxy config */
+			 <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>, /* DMSS */
+			 <0x00 0x60000000 0x00 0x60000000 0x00 0x08000000>, /* FSS0 DAT1 */
+			 <0x00 0x70000000 0x00 0x70000000 0x00 0x00010000>, /* OCSRAM */
+			 <0x01 0x00000000 0x01 0x00000000 0x00 0x00310000>, /* A53 PERIPHBASE */
+			 <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS0 DAT3 */
+
+			 /* MCU Domain Range */
+			 <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>,
+
+			 /* Wakeup Domain Range */
+			 <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>,
+			 <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>;
+
+		cbass_mcu: bus@4000000 {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>; /* Peripheral window */
+		};
+
+		cbass_wakeup: bus@2b000000 {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>, /* Peripheral Window */
+				 <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>;
+		};
+	};
+};
+
+/* Now include the peripherals for each bus segments */
+#include "k3-am62-main.dtsi"
+#include "k3-am62-mcu.dtsi"
+#include "k3-am62-wakeup.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am625-sk.dts b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
new file mode 100644
index 000000000000..0de4113ccd5d
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
@@ -0,0 +1,206 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * AM625 SK: https://www.ti.com/lit/zip/sprr448
+ *
+ * Copyright (C) 2021-2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "k3-am625.dtsi"
+
+/ {
+	compatible =  "ti,am625-sk", "ti,am625";
+	model = "Texas Instruments AM625 SK";
+
+	aliases {
+		serial2 = &main_uart0;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+		bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		/* 2G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
+
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure_tfa_ddr: tfa@9e780000 {
+			reg = <0x00 0x9e780000 0x00 0x80000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
+			alignment = <0x1000>;
+			no-map;
+		};
+
+		wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9db00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9db00000 0x00 0xc00000>;
+			no-map;
+		};
+	};
+
+	vmain_pd: regulator-0 {
+		/* TPS65988 PD CONTROLLER OUTPUT */
+		compatible = "regulator-fixed";
+		regulator-name = "vmain_pd";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_5v0: regulator-1 {
+		/* Output of LM34936 */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vmain_pd>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_3v3_sys: regulator-2 {
+		/* output of LM61460-Q1 */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3_sys";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vmain_pd>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&usr_led_pins_default>;
+
+		led-0 {
+			label = "am62-sk:green:heartbeat";
+			gpios = <&main_gpio1 49 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			function = LED_FUNCTION_HEARTBEAT;
+			default-state = "off";
+		};
+	};
+};
+
+&main_pmx0 {
+	main_uart0_pins_default: main-uart0-pins-default {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x1c8, PIN_INPUT, 0) /* (D14) UART0_RXD */
+			AM62X_IOPAD(0x1cc, PIN_OUTPUT, 0) /* (E14) UART0_TXD */
+		>;
+	};
+
+	main_i2c0_pins_default: main-i2c0-pins-default {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x1e0, PIN_INPUT_PULLUP, 0) /* (B16) I2C0_SCL */
+			AM62X_IOPAD(0x1e4, PIN_INPUT_PULLUP, 0) /* (A16) I2C0_SDA */
+		>;
+	};
+
+	main_i2c1_pins_default: main-i2c1-pins-default {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x1e8, PIN_INPUT_PULLUP, 0) /* (B17) I2C1_SCL */
+			AM62X_IOPAD(0x1ec, PIN_INPUT_PULLUP, 0) /* (A17) I2C1_SDA */
+		>;
+	};
+
+	usr_led_pins_default: usr-led-pins-default {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x244, PIN_OUTPUT, 7) /* (C17) MMC1_SDWP.GPIO1_49 */
+		>;
+	};
+};
+
+&wkup_uart0 {
+	/* WKUP UART0 is used by DM firmware */
+	status = "reserved";
+};
+
+&mcu_uart0 {
+	status = "disabled";
+};
+
+&main_uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart0_pins_default>;
+};
+
+&main_uart1 {
+	/* Main UART1 is used by TIFS firmware */
+	status = "reserved";
+};
+
+&main_uart2 {
+	status = "disabled";
+};
+
+&main_uart3 {
+	status = "disabled";
+};
+
+&main_uart4 {
+	status = "disabled";
+};
+
+&main_uart5 {
+	status = "disabled";
+};
+
+&main_uart6 {
+	status = "disabled";
+};
+
+&mcu_i2c0 {
+	status = "disabled";
+};
+
+&wkup_i2c0 {
+	status = "disabled";
+};
+
+&main_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <400000>;
+};
+
+&main_i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c1_pins_default>;
+	clock-frequency = <400000>;
+};
+
+&main_i2c2 {
+	status = "disabled";
+};
+
+&main_i2c3 {
+	status = "disabled";
+};
+
+&mailbox0_cluster0 {
+	mbox_m4_0: mbox-m4-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am625.dtsi b/arch/arm64/boot/dts/ti/k3-am625.dtsi
new file mode 100644
index 000000000000..887f31c23fef
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am625.dtsi
@@ -0,0 +1,103 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for AM625 SoC family in Quad core configuration
+ *
+ * TRM: https://www.ti.com/lit/pdf/spruiv7
+ *
+ * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "k3-am62.dtsi"
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0: cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+
+				core2 {
+					cpu = <&cpu2>;
+				};
+
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			reg = <0x000>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			reg = <0x001>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a53";
+			reg = <0x002>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a53";
+			reg = <0x003>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_0>;
+		};
+	};
+
+	L2_0: l2-cache0 {
+		compatible = "cache";
+		cache-level = <2>;
+		cache-size = <0x40000>;
+		cache-line-size = <64>;
+		cache-sets = <512>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
index 012011dc619a..f64b368c6c37 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
@@ -59,7 +59,10 @@
 		#interrupt-cells = <3>;
 		interrupt-controller;
 		reg = <0x00 0x01800000 0x00 0x10000>,	/* GICD */
-		      <0x00 0x01840000 0x00 0xC0000>;	/* GICR */
+		      <0x00 0x01840000 0x00 0xC0000>,	/* GICR */
+		      <0x01 0x00000000 0x00 0x2000>,	/* GICC */
+		      <0x01 0x00010000 0x00 0x1000>,	/* GICH */
+		      <0x01 0x00020000 0x00 0x2000>;	/* GICV */
 		/*
 		 * vcpumntirq:
 		 * virtual CPU interface maintenance interrupt
@@ -982,6 +985,24 @@
 		clock-names = "fck";
 	};
 
+	main_rti0: watchdog@e000000 {
+			compatible = "ti,j7-rti-wdt";
+			reg = <0x00 0xe000000 0x00 0x100>;
+			clocks = <&k3_clks 125 0>;
+			power-domains = <&k3_pds 125 TI_SCI_PD_EXCLUSIVE>;
+			assigned-clocks = <&k3_clks 125 0>;
+			assigned-clock-parents = <&k3_clks 125 2>;
+	};
+
+	main_rti1: watchdog@e010000 {
+			compatible = "ti,j7-rti-wdt";
+			reg = <0x00 0xe010000 0x00 0x100>;
+			clocks = <&k3_clks 126 0>;
+			power-domains = <&k3_pds 126 TI_SCI_PD_EXCLUSIVE>;
+			assigned-clocks = <&k3_clks 126 0>;
+			assigned-clock-parents = <&k3_clks 126 2>;
+	};
+
 	icssg0: icssg@30000000 {
 		compatible = "ti,am642-icssg";
 		reg = <0x00 0x30000000 0x00 0x80000>;
diff --git a/arch/arm64/boot/dts/ti/k3-am64.dtsi b/arch/arm64/boot/dts/ti/k3-am64.dtsi
index 120974726be8..016dd8511ca6 100644
--- a/arch/arm64/boot/dts/ti/k3-am64.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64.dtsi
@@ -66,11 +66,14 @@
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges = <0x00 0x000f4000 0x00 0x000f4000 0x00 0x000002d0>, /* PINCTRL */
+			 <0x00 0x00420000 0x00 0x00420000 0x00 0x00001000>, /* ESM0 */
 			 <0x00 0x00600000 0x00 0x00600000 0x00 0x00001100>, /* GPIO */
 			 <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* Timesync router */
 			 <0x00 0x01000000 0x00 0x01000000 0x00 0x02330400>, /* First peripheral window */
 			 <0x00 0x08000000 0x00 0x08000000 0x00 0x00200000>, /* Main CPSW */
 			 <0x00 0x0d000000 0x00 0x0d000000 0x00 0x00800000>, /* PCIE_CORE */
+			 <0x00 0x0e000000 0x00 0x0e000000 0x00 0x00000100>, /* Main RTI0 */
+			 <0x00 0x0e010000 0x00 0x0e010000 0x00 0x00000100>, /* Main RTI1 */
 			 <0x00 0x0f000000 0x00 0x0f000000 0x00 0x00c44200>, /* Second peripheral window */
 			 <0x00 0x20000000 0x00 0x20000000 0x00 0x0a008000>, /* Third peripheral window */
 			 <0x00 0x30000000 0x00 0x30000000 0x00 0x000bc100>, /* ICSSG0/1 */
@@ -87,6 +90,7 @@
 			 <0x00 0x68000000 0x00 0x68000000 0x00 0x08000000>, /* PCIe DAT0 */
 			 <0x00 0x70000000 0x00 0x70000000 0x00 0x00200000>, /* OC SRAM */
 			 <0x00 0x78000000 0x00 0x78000000 0x00 0x00800000>, /* Main R5FSS */
+			 <0x01 0x00000000 0x01 0x00000000 0x00 0x00310000>, /* A53 PERIPHBASE */
 			 <0x06 0x00000000 0x06 0x00000000 0x01 0x00000000>, /* PCIe DAT1 */
 			 <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS0 DAT3 */
 
diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
index e94ae178b1ae..8e7893e58b03 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
@@ -498,7 +498,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&ospi0_pins_default>;
 
-	flash@0{
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0x0>;
 		spi-tx-bus-width = <8>;
@@ -509,8 +509,6 @@
 		cdns,tchsh-ns = <60>;
 		cdns,tslch-ns = <60>;
 		cdns,read-delay = <4>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
index a9785bec12df..1d7db8bf3a5c 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
@@ -369,7 +369,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&ospi0_pins_default>;
 
-	flash@0{
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0x0>;
 		spi-tx-bus-width = <8>;
@@ -380,8 +380,6 @@
 		cdns,tchsh-ns = <60>;
 		cdns,tslch-ns = <60>;
 		cdns,read-delay = <4>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
index 3079eaee01c0..6e41f2fa044a 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
@@ -603,8 +603,6 @@
 		cdns,tchsh-ns = <60>;
 		cdns,tslch-ns = <60>;
 		cdns,read-delay = <2>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index ce8bb4a61011..e749343acced 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -35,7 +35,10 @@
 		#interrupt-cells = <3>;
 		interrupt-controller;
 		reg = <0x00 0x01800000 0x00 0x10000>,	/* GICD */
-		      <0x00 0x01880000 0x00 0x90000>;	/* GICR */
+		      <0x00 0x01880000 0x00 0x90000>,	/* GICR */
+		      <0x00 0x6f000000 0x00 0x2000>,	/* GICC */
+		      <0x00 0x6f010000 0x00 0x1000>,	/* GICH */
+		      <0x00 0x6f020000 0x00 0x2000>;	/* GICV */
 		/*
 		 * vcpumntirq:
 		 * virtual CPU interface maintenance interrupt
diff --git a/arch/arm64/boot/dts/ti/k3-am65.dtsi b/arch/arm64/boot/dts/ti/k3-am65.dtsi
index a58a39fa42db..c538a0bf3cdd 100644
--- a/arch/arm64/boot/dts/ti/k3-am65.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65.dtsi
@@ -86,6 +86,7 @@
 			 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
 			 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
 			 <0x00 0x50000000 0x00 0x50000000 0x00 0x8000000>,
+			 <0x00 0x6f000000 0x00 0x6f000000 0x00 0x00310000>, /* A53 PERIPHBASE */
 			 <0x00 0x70000000 0x00 0x70000000 0x00 0x200000>,
 			 <0x05 0x00000000 0x05 0x00000000 0x01 0x0000000>,
 			 <0x07 0x00000000 0x07 0x00000000 0x01 0x0000000>;
diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index 9043f91c9bec..57497cb1ed68 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -333,14 +333,12 @@
 	#size-cells= <0>;
 	ti,pindir-d0-out-d1-in;
 
-	flash@0{
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0x0>;
 		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <1>;
 		spi-max-frequency = <48000000>;
-		#address-cells = <1>;
-		#size-cells= <1>;
 	};
 };
 
@@ -498,7 +496,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
 
-	flash@0{
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0x0>;
 		spi-tx-bus-width = <8>;
@@ -509,8 +507,6 @@
 		cdns,tchsh-ns = <60>;
 		cdns,tslch-ns = <60>;
 		cdns,read-delay = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index 05a627ad6cdc..16684a2f054d 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -54,7 +54,10 @@
 		#interrupt-cells = <3>;
 		interrupt-controller;
 		reg = <0x00 0x01800000 0x00 0x10000>,	/* GICD */
-		      <0x00 0x01900000 0x00 0x100000>;	/* GICR */
+		      <0x00 0x01900000 0x00 0x100000>,	/* GICR */
+		      <0x00 0x6f000000 0x00 0x2000>,	/* GICC */
+		      <0x00 0x6f010000 0x00 0x1000>,	/* GICH */
+		      <0x00 0x6f020000 0x00 0x2000>;	/* GICV */
 
 		/* vcpumntirq: virtual CPU interface maintenance interrupt */
 		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
index 34724440171a..2d615c3e9fa1 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
@@ -256,7 +256,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
 
-	flash@0{
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0x0>;
 		spi-tx-bus-width = <8>;
@@ -267,7 +267,5 @@
 		cdns,tchsh-ns = <60>;
 		cdns,tslch-ns = <60>;
 		cdns,read-delay = <4>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-j7200.dtsi b/arch/arm64/boot/dts/ti/k3-j7200.dtsi
index 64fef4e67d76..b6da0454cc5b 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200.dtsi
@@ -129,6 +129,7 @@
 			 <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* timesync router */
 			 <0x00 0x01000000 0x00 0x01000000 0x00 0x0d000000>, /* Most peripherals */
 			 <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>, /* MAIN NAVSS */
+			 <0x00 0x6f000000 0x00 0x6f000000 0x00 0x00310000>, /* A72 PERIPHBASE */
 			 <0x00 0x70000000 0x00 0x70000000 0x00 0x00800000>, /* MSMC RAM */
 			 <0x00 0x18000000 0x00 0x18000000 0x00 0x08000000>, /* PCIe1 DAT0 */
 			 <0x41 0x00000000 0x41 0x00000000 0x01 0x00000000>, /* PCIe1 DAT1 */
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
index 2d7596911b27..f5ca8e26ed99 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
@@ -482,7 +482,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcu_fss0_ospi1_pins_default>;
 
-	flash@0{
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0x0>;
 		spi-tx-bus-width = <1>;
@@ -493,8 +493,6 @@
 		cdns,tchsh-ns = <60>;
 		cdns,tslch-ns = <60>;
 		cdns,read-delay = <2>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 599861259a30..db0669985e42 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -76,7 +76,10 @@
 		#interrupt-cells = <3>;
 		interrupt-controller;
 		reg = <0x00 0x01800000 0x00 0x10000>,	/* GICD */
-		      <0x00 0x01900000 0x00 0x100000>;	/* GICR */
+		      <0x00 0x01900000 0x00 0x100000>,	/* GICR */
+		      <0x00 0x6f000000 0x00 0x2000>,	/* GICC */
+		      <0x00 0x6f010000 0x00 0x1000>,	/* GICH */
+		      <0x00 0x6f020000 0x00 0x2000>;	/* GICV */
 
 		/* vcpumntirq: virtual CPU interface maintenance interrupt */
 		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
index b726310d867c..f25d85169e0d 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
@@ -475,8 +475,6 @@
 		cdns,tchsh-ns = <60>;
 		cdns,tslch-ns = <60>;
 		cdns,read-delay = <4>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
index 2fee2906183d..e36335232cf8 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
@@ -171,7 +171,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
 
-	flash@0{
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0x0>;
 		spi-tx-bus-width = <8>;
@@ -182,8 +182,6 @@
 		cdns,tchsh-ns = <60>;
 		cdns,tslch-ns = <60>;
 		cdns,read-delay = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/ti/k3-j721e.dtsi b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
index 4a3872fce533..0e23886c9fd1 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
@@ -139,6 +139,7 @@
 			 <0x00 0x0e000000 0x00 0x0e000000 0x00 0x01800000>, /* PCIe Core*/
 			 <0x00 0x10000000 0x00 0x10000000 0x00 0x10000000>, /* PCIe DAT */
 			 <0x00 0x64800000 0x00 0x64800000 0x00 0x00800000>, /* C71 */
+			 <0x00 0x6f000000 0x00 0x6f000000 0x00 0x00310000>, /* A72 PERIPHBASE */
 			 <0x44 0x00000000 0x44 0x00000000 0x00 0x08000000>, /* PCIe2 DAT */
 			 <0x44 0x10000000 0x44 0x10000000 0x00 0x08000000>, /* PCIe3 DAT */
 			 <0x4d 0x80800000 0x4d 0x80800000 0x00 0x00800000>, /* C66_0 */
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
index a5a24f9f46c5..b210cc07c539 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
@@ -15,8 +15,18 @@
 	model = "Texas Instruments J721S2 EVM";
 
 	chosen {
-		stdout-path = "serial10:115200n8";
-		bootargs = "console=ttyS10,115200n8 earlycon=ns16550a,mmio32,2880000";
+		stdout-path = "serial2:115200n8";
+		bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,2880000";
+	};
+
+	aliases {
+		serial1 = &mcu_uart0;
+		serial2 = &main_uart8;
+		mmc0 = &main_sdhci0;
+		mmc1 = &main_sdhci1;
+		can0 = &main_mcan16;
+		can1 = &mcu_mcan0;
+		can2 = &mcu_mcan1;
 	};
 
 	evm_12v0: fixedregulator-evm12v0 {
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
index b04db1d3ab61..be7f39299894 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
@@ -34,7 +34,10 @@
 		#interrupt-cells = <3>;
 		interrupt-controller;
 		reg = <0x00 0x01800000 0x00 0x200000>, /* GICD */
-		      <0x00 0x01900000 0x00 0x100000>; /* GICR */
+		      <0x00 0x01900000 0x00 0x100000>, /* GICR */
+		      <0x00 0x6f000000 0x00 0x2000>,   /* GICC */
+		      <0x00 0x6f010000 0x00 0x1000>,   /* GICH */
+		      <0x00 0x6f020000 0x00 0x2000>;   /* GICV */
 
 		/* vcpumntirq: virtual CPU interface maintenance interrupt */
 		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
index 7521963719ff..6c5c02edb375 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
@@ -108,7 +108,7 @@
 		reg = <0x00 0x42110000 0x00 0x100>;
 		gpio-controller;
 		#gpio-cells = <2>;
-		interrupt-parent = <&main_gpio_intr>;
+		interrupt-parent = <&wkup_gpio_intr>;
 		interrupts = <103>, <104>, <105>, <106>, <107>, <108>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
@@ -124,7 +124,7 @@
 		reg = <0x00 0x42100000 0x00 0x100>;
 		gpio-controller;
 		#gpio-cells = <2>;
-		interrupt-parent = <&main_gpio_intr>;
+		interrupt-parent = <&wkup_gpio_intr>;
 		interrupts = <112>, <113>, <114>, <115>, <116>, <117>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2.dtsi
index 80d3cae03e88..7b930a85a29d 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2.dtsi
@@ -21,28 +21,6 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
-	aliases {
-		serial0 = &wkup_uart0;
-		serial1 = &mcu_uart0;
-		serial2 = &main_uart0;
-		serial3 = &main_uart1;
-		serial4 = &main_uart2;
-		serial5 = &main_uart3;
-		serial6 = &main_uart4;
-		serial7 = &main_uart5;
-		serial8 = &main_uart6;
-		serial9 = &main_uart7;
-		serial10 = &main_uart8;
-		serial11 = &main_uart9;
-		mmc0 = &main_sdhci0;
-		mmc1 = &main_sdhci1;
-		can0 = &main_mcan16;
-		can1 = &mcu_mcan0;
-		can2 = &mcu_mcan1;
-		can3 = &main_mcan3;
-		can4 = &main_mcan5;
-	};
-
 	chosen { };
 
 	cpus {
@@ -141,6 +119,7 @@
 			 <0x00 0x18000000 0x00 0x18000000 0x00 0x08000000>, /* PCIe1 DAT0 */
 			 <0x00 0x64800000 0x00 0x64800000 0x00 0x0070c000>, /* C71_1 */
 			 <0x00 0x65800000 0x00 0x65800000 0x00 0x0070c000>, /* C71_2 */
+			 <0x00 0x6f000000 0x00 0x6f000000 0x00 0x00310000>, /* A72 PERIPHBASE */
 			 <0x00 0x70000000 0x00 0x70000000 0x00 0x00400000>, /* MSMC RAM */
 			 <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>, /* MAIN NAVSS */
 			 <0x41 0x00000000 0x41 0x00000000 0x01 0x00000000>, /* PCIe1 DAT1 */
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index 74e66443e4ce..3e15391e5b37 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -254,106 +254,106 @@
 		};
 
 		/* GDMA */
-		fpd_dma_chan1: dma@fd500000 {
+		fpd_dma_chan1: dma-controller@fd500000 {
 			status = "disabled";
 			compatible = "xlnx,zynqmp-dma-1.0";
 			reg = <0x0 0xfd500000 0x0 0x1000>;
 			interrupt-parent = <&gic>;
 			interrupts = <0 124 4>;
 			clock-names = "clk_main", "clk_apb";
+			#dma-cells = <1>;
 			xlnx,bus-width = <128>;
-			#stream-id-cells = <1>;
 			iommus = <&smmu 0x14e8>;
 			power-domains = <&zynqmp_firmware PD_GDMA>;
 		};
 
-		fpd_dma_chan2: dma@fd510000 {
+		fpd_dma_chan2: dma-controller@fd510000 {
 			status = "disabled";
 			compatible = "xlnx,zynqmp-dma-1.0";
 			reg = <0x0 0xfd510000 0x0 0x1000>;
 			interrupt-parent = <&gic>;
 			interrupts = <0 125 4>;
 			clock-names = "clk_main", "clk_apb";
+			#dma-cells = <1>;
 			xlnx,bus-width = <128>;
-			#stream-id-cells = <1>;
 			iommus = <&smmu 0x14e9>;
 			power-domains = <&zynqmp_firmware PD_GDMA>;
 		};
 
-		fpd_dma_chan3: dma@fd520000 {
+		fpd_dma_chan3: dma-controller@fd520000 {
 			status = "disabled";
 			compatible = "xlnx,zynqmp-dma-1.0";
 			reg = <0x0 0xfd520000 0x0 0x1000>;
 			interrupt-parent = <&gic>;
 			interrupts = <0 126 4>;
 			clock-names = "clk_main", "clk_apb";
+			#dma-cells = <1>;
 			xlnx,bus-width = <128>;
-			#stream-id-cells = <1>;
 			iommus = <&smmu 0x14ea>;
 			power-domains = <&zynqmp_firmware PD_GDMA>;
 		};
 
-		fpd_dma_chan4: dma@fd530000 {
+		fpd_dma_chan4: dma-controller@fd530000 {
 			status = "disabled";
 			compatible = "xlnx,zynqmp-dma-1.0";
 			reg = <0x0 0xfd530000 0x0 0x1000>;
 			interrupt-parent = <&gic>;
 			interrupts = <0 127 4>;
 			clock-names = "clk_main", "clk_apb";
+			#dma-cells = <1>;
 			xlnx,bus-width = <128>;
-			#stream-id-cells = <1>;
 			iommus = <&smmu 0x14eb>;
 			power-domains = <&zynqmp_firmware PD_GDMA>;
 		};
 
-		fpd_dma_chan5: dma@fd540000 {
+		fpd_dma_chan5: dma-controller@fd540000 {
 			status = "disabled";
 			compatible = "xlnx,zynqmp-dma-1.0";
 			reg = <0x0 0xfd540000 0x0 0x1000>;
 			interrupt-parent = <&gic>;
 			interrupts = <0 128 4>;
 			clock-names = "clk_main", "clk_apb";
+			#dma-cells = <1>;
 			xlnx,bus-width = <128>;
-			#stream-id-cells = <1>;
 			iommus = <&smmu 0x14ec>;
 			power-domains = <&zynqmp_firmware PD_GDMA>;
 		};
 
-		fpd_dma_chan6: dma@fd550000 {
+		fpd_dma_chan6: dma-controller@fd550000 {
 			status = "disabled";
 			compatible = "xlnx,zynqmp-dma-1.0";
 			reg = <0x0 0xfd550000 0x0 0x1000>;
 			interrupt-parent = <&gic>;
 			interrupts = <0 129 4>;
 			clock-names = "clk_main", "clk_apb";
+			#dma-cells = <1>;
 			xlnx,bus-width = <128>;
-			#stream-id-cells = <1>;
 			iommus = <&smmu 0x14ed>;
 			power-domains = <&zynqmp_firmware PD_GDMA>;
 		};
 
-		fpd_dma_chan7: dma@fd560000 {
+		fpd_dma_chan7: dma-controller@fd560000 {
 			status = "disabled";
 			compatible = "xlnx,zynqmp-dma-1.0";
 			reg = <0x0 0xfd560000 0x0 0x1000>;
 			interrupt-parent = <&gic>;
 			interrupts = <0 130 4>;
 			clock-names = "clk_main", "clk_apb";
+			#dma-cells = <1>;
 			xlnx,bus-width = <128>;
-			#stream-id-cells = <1>;
 			iommus = <&smmu 0x14ee>;
 			power-domains = <&zynqmp_firmware PD_GDMA>;
 		};
 
-		fpd_dma_chan8: dma@fd570000 {
+		fpd_dma_chan8: dma-controller@fd570000 {
 			status = "disabled";
 			compatible = "xlnx,zynqmp-dma-1.0";
 			reg = <0x0 0xfd570000 0x0 0x1000>;
 			interrupt-parent = <&gic>;
 			interrupts = <0 131 4>;
 			clock-names = "clk_main", "clk_apb";
+			#dma-cells = <1>;
 			xlnx,bus-width = <128>;
-			#stream-id-cells = <1>;
 			iommus = <&smmu 0x14ef>;
 			power-domains = <&zynqmp_firmware PD_GDMA>;
 		};
@@ -375,106 +375,106 @@
 		 * These dma channels, Users should ensure that these dma
 		 * Channels are allowed for non secure access.
 		 */
-		lpd_dma_chan1: dma@ffa80000 {
+		lpd_dma_chan1: dma-controller@ffa80000 {
 			status = "disabled";
 			compatible = "xlnx,zynqmp-dma-1.0";
 			reg = <0x0 0xffa80000 0x0 0x1000>;
 			interrupt-parent = <&gic>;
 			interrupts = <0 77 4>;
 			clock-names = "clk_main", "clk_apb";
+			#dma-cells = <1>;
 			xlnx,bus-width = <64>;
-			#stream-id-cells = <1>;
 			iommus = <&smmu 0x868>;
 			power-domains = <&zynqmp_firmware PD_ADMA>;
 		};
 
-		lpd_dma_chan2: dma@ffa90000 {
+		lpd_dma_chan2: dma-controller@ffa90000 {
 			status = "disabled";
 			compatible = "xlnx,zynqmp-dma-1.0";
 			reg = <0x0 0xffa90000 0x0 0x1000>;
 			interrupt-parent = <&gic>;
 			interrupts = <0 78 4>;
 			clock-names = "clk_main", "clk_apb";
+			#dma-cells = <1>;
 			xlnx,bus-width = <64>;
-			#stream-id-cells = <1>;
 			iommus = <&smmu 0x869>;
 			power-domains = <&zynqmp_firmware PD_ADMA>;
 		};
 
-		lpd_dma_chan3: dma@ffaa0000 {
+		lpd_dma_chan3: dma-controller@ffaa0000 {
 			status = "disabled";
 			compatible = "xlnx,zynqmp-dma-1.0";
 			reg = <0x0 0xffaa0000 0x0 0x1000>;
 			interrupt-parent = <&gic>;
 			interrupts = <0 79 4>;
 			clock-names = "clk_main", "clk_apb";
+			#dma-cells = <1>;
 			xlnx,bus-width = <64>;
-			#stream-id-cells = <1>;
 			iommus = <&smmu 0x86a>;
 			power-domains = <&zynqmp_firmware PD_ADMA>;
 		};
 
-		lpd_dma_chan4: dma@ffab0000 {
+		lpd_dma_chan4: dma-controller@ffab0000 {
 			status = "disabled";
 			compatible = "xlnx,zynqmp-dma-1.0";
 			reg = <0x0 0xffab0000 0x0 0x1000>;
 			interrupt-parent = <&gic>;
 			interrupts = <0 80 4>;
 			clock-names = "clk_main", "clk_apb";
+			#dma-cells = <1>;
 			xlnx,bus-width = <64>;
-			#stream-id-cells = <1>;
 			iommus = <&smmu 0x86b>;
 			power-domains = <&zynqmp_firmware PD_ADMA>;
 		};
 
-		lpd_dma_chan5: dma@ffac0000 {
+		lpd_dma_chan5: dma-controller@ffac0000 {
 			status = "disabled";
 			compatible = "xlnx,zynqmp-dma-1.0";
 			reg = <0x0 0xffac0000 0x0 0x1000>;
 			interrupt-parent = <&gic>;
 			interrupts = <0 81 4>;
 			clock-names = "clk_main", "clk_apb";
+			#dma-cells = <1>;
 			xlnx,bus-width = <64>;
-			#stream-id-cells = <1>;
 			iommus = <&smmu 0x86c>;
 			power-domains = <&zynqmp_firmware PD_ADMA>;
 		};
 
-		lpd_dma_chan6: dma@ffad0000 {
+		lpd_dma_chan6: dma-controller@ffad0000 {
 			status = "disabled";
 			compatible = "xlnx,zynqmp-dma-1.0";
 			reg = <0x0 0xffad0000 0x0 0x1000>;
 			interrupt-parent = <&gic>;
 			interrupts = <0 82 4>;
 			clock-names = "clk_main", "clk_apb";
+			#dma-cells = <1>;
 			xlnx,bus-width = <64>;
-			#stream-id-cells = <1>;
 			iommus = <&smmu 0x86d>;
 			power-domains = <&zynqmp_firmware PD_ADMA>;
 		};
 
-		lpd_dma_chan7: dma@ffae0000 {
+		lpd_dma_chan7: dma-controller@ffae0000 {
 			status = "disabled";
 			compatible = "xlnx,zynqmp-dma-1.0";
 			reg = <0x0 0xffae0000 0x0 0x1000>;
 			interrupt-parent = <&gic>;
 			interrupts = <0 83 4>;
 			clock-names = "clk_main", "clk_apb";
+			#dma-cells = <1>;
 			xlnx,bus-width = <64>;
-			#stream-id-cells = <1>;
 			iommus = <&smmu 0x86e>;
 			power-domains = <&zynqmp_firmware PD_ADMA>;
 		};
 
-		lpd_dma_chan8: dma@ffaf0000 {
+		lpd_dma_chan8: dma-controller@ffaf0000 {
 			status = "disabled";
 			compatible = "xlnx,zynqmp-dma-1.0";
 			reg = <0x0 0xffaf0000 0x0 0x1000>;
 			interrupt-parent = <&gic>;
 			interrupts = <0 84 4>;
 			clock-names = "clk_main", "clk_apb";
+			#dma-cells = <1>;
 			xlnx,bus-width = <64>;
-			#stream-id-cells = <1>;
 			iommus = <&smmu 0x86f>;
 			power-domains = <&zynqmp_firmware PD_ADMA>;
 		};
@@ -495,7 +495,6 @@
 			interrupts = <0 14 4>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			#stream-id-cells = <1>;
 			iommus = <&smmu 0x872>;
 			power-domains = <&zynqmp_firmware PD_NAND>;
 		};
@@ -509,7 +508,6 @@
 			clock-names = "pclk", "hclk", "tx_clk";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			#stream-id-cells = <1>;
 			iommus = <&smmu 0x874>;
 			power-domains = <&zynqmp_firmware PD_ETH_0>;
 		};
@@ -523,7 +521,6 @@
 			clock-names = "pclk", "hclk", "tx_clk";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			#stream-id-cells = <1>;
 			iommus = <&smmu 0x875>;
 			power-domains = <&zynqmp_firmware PD_ETH_1>;
 		};
@@ -537,7 +534,6 @@
 			clock-names = "pclk", "hclk", "tx_clk";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			#stream-id-cells = <1>;
 			iommus = <&smmu 0x876>;
 			power-domains = <&zynqmp_firmware PD_ETH_2>;
 		};
@@ -551,7 +547,6 @@
 			clock-names = "pclk", "hclk", "tx_clk";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			#stream-id-cells = <1>;
 			iommus = <&smmu 0x877>;
 			power-domains = <&zynqmp_firmware PD_ETH_3>;
 		};
@@ -621,7 +616,6 @@
 					<0x0 0x0 0x0 0x2 &pcie_intc 0x2>,
 					<0x0 0x0 0x0 0x3 &pcie_intc 0x3>,
 					<0x0 0x0 0x0 0x4 &pcie_intc 0x4>;
-			#stream-id-cells = <1>;
 			iommus = <&smmu 0x4d0>;
 			power-domains = <&zynqmp_firmware PD_PCIE>;
 			pcie_intc: legacy-interrupt-controller {
@@ -642,7 +636,6 @@
 			      <0x0 0xc0000000 0x0 0x8000000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			#stream-id-cells = <1>;
 			iommus = <&smmu 0x873>;
 			power-domains = <&zynqmp_firmware PD_QSPI>;
 		};
@@ -674,7 +667,6 @@
 			interrupts = <0 133 4>;
 			power-domains = <&zynqmp_firmware PD_SATA>;
 			resets = <&zynqmp_reset ZYNQMP_RESET_SATA>;
-			#stream-id-cells = <4>;
 			iommus = <&smmu 0x4c0>, <&smmu 0x4c1>,
 				 <&smmu 0x4c2>, <&smmu 0x4c3>;
 		};
@@ -686,7 +678,6 @@
 			interrupts = <0 48 4>;
 			reg = <0x0 0xff160000 0x0 0x1000>;
 			clock-names = "clk_xin", "clk_ahb";
-			#stream-id-cells = <1>;
 			iommus = <&smmu 0x870>;
 			#clock-cells = <1>;
 			clock-output-names = "clk_out_sd0", "clk_in_sd0";
@@ -700,7 +691,6 @@
 			interrupts = <0 49 4>;
 			reg = <0x0 0xff170000 0x0 0x1000>;
 			clock-names = "clk_xin", "clk_ahb";
-			#stream-id-cells = <1>;
 			iommus = <&smmu 0x871>;
 			#clock-cells = <1>;
 			clock-output-names = "clk_out_sd1", "clk_in_sd1";
@@ -825,7 +815,6 @@
 				interrupt-parent = <&gic>;
 				interrupt-names = "dwc_usb3", "otg";
 				interrupts = <0 65 4>, <0 69 4>;
-				#stream-id-cells = <1>;
 				iommus = <&smmu 0x860>;
 				snps,quirk-frame-length-adjustment = <0x20>;
 				/* dma-coherent; */
@@ -852,7 +841,6 @@
 				interrupt-parent = <&gic>;
 				interrupt-names = "dwc_usb3", "otg";
 				interrupts = <0 70 4>, <0 74 4>;
-				#stream-id-cells = <1>;
 				iommus = <&smmu 0x861>;
 				snps,quirk-frame-length-adjustment = <0x20>;
 				/* dma-coherent; */
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 30516dc0b70e..50aa3d75ab4f 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -3,17 +3,19 @@ CONFIG_POSIX_MQUEUE=y
 CONFIG_AUDIT=y
 CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BPF_SYSCALL=y
+CONFIG_BPF_JIT=y
 CONFIG_PREEMPT=y
 CONFIG_IRQ_TIME_ACCOUNTING=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_TASKSTATS=y
 CONFIG_TASK_XACCT=y
 CONFIG_TASK_IO_ACCOUNTING=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_NUMA_BALANCING=y
 CONFIG_MEMCG=y
-CONFIG_MEMCG_SWAP=y
 CONFIG_BLK_CGROUP=y
 CONFIG_CGROUP_PIDS=y
 CONFIG_CGROUP_HUGETLB=y
@@ -21,6 +23,7 @@ CONFIG_CPUSETS=y
 CONFIG_CGROUP_DEVICE=y
 CONFIG_CGROUP_CPUACCT=y
 CONFIG_CGROUP_PERF=y
+CONFIG_CGROUP_BPF=y
 CONFIG_USER_NS=y
 CONFIG_SCHED_AUTOGROUP=y
 CONFIG_BLK_DEV_INITRD=y
@@ -54,6 +57,7 @@ CONFIG_ARCH_SEATTLE=y
 CONFIG_ARCH_INTEL_SOCFPGA=y
 CONFIG_ARCH_SYNQUACER=y
 CONFIG_ARCH_TEGRA=y
+CONFIG_ARCH_TESLA_FSD=y
 CONFIG_ARCH_SPRD=y
 CONFIG_ARCH_THUNDER=y
 CONFIG_ARCH_THUNDER2=y
@@ -66,7 +70,6 @@ CONFIG_ARM64_VA_BITS_48=y
 CONFIG_SCHED_MC=y
 CONFIG_SCHED_SMT=y
 CONFIG_NUMA=y
-CONFIG_SECCOMP=y
 CONFIG_KEXEC=y
 CONFIG_KEXEC_FILE=y
 CONFIG_CRASH_DUMP=y
@@ -84,7 +87,6 @@ CONFIG_CPU_FREQ_GOV_POWERSAVE=m
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
 CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
 CONFIG_CPUFREQ_DT=y
 CONFIG_ACPI_CPPC_CPUFREQ=m
 CONFIG_ARM_ALLWINNER_SUN50I_CPUFREQ_NVMEM=m
@@ -96,16 +98,8 @@ CONFIG_ARM_QCOM_CPUFREQ_HW=y
 CONFIG_ARM_RASPBERRYPI_CPUFREQ=m
 CONFIG_ARM_SCMI_CPUFREQ=y
 CONFIG_ARM_TEGRA186_CPUFREQ=y
+CONFIG_ARM_MEDIATEK_CPUFREQ=y
 CONFIG_QORIQ_CPUFREQ=y
-CONFIG_ARM_SCMI_PROTOCOL=y
-CONFIG_ARM_SCPI_PROTOCOL=y
-CONFIG_RASPBERRYPI_FIRMWARE=y
-CONFIG_INTEL_STRATIX10_SERVICE=y
-CONFIG_INTEL_STRATIX10_RSU=m
-CONFIG_QCOM_SCM=y
-CONFIG_EFI_CAPSULE_LOADER=y
-CONFIG_IMX_SCU=y
-CONFIG_IMX_SCU_PD=y
 CONFIG_ACPI=y
 CONFIG_ACPI_APEI=y
 CONFIG_ACPI_APEI_GHES=y
@@ -127,6 +121,7 @@ CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
 CONFIG_CRYPTO_CHACHA20_NEON=m
 CONFIG_CRYPTO_AES_ARM64_BS=m
 CONFIG_JUMP_LABEL=y
+CONFIG_SECCOMP=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
@@ -182,14 +177,13 @@ CONFIG_NET_ACT_GATE=m
 CONFIG_QRTR=m
 CONFIG_QRTR_SMD=m
 CONFIG_QRTR_TUN=m
-CONFIG_BPF_JIT=y
 CONFIG_CAN=m
+CONFIG_CAN_FLEXCAN=m
 CONFIG_CAN_RCAR=m
 CONFIG_CAN_RCAR_CANFD=m
-CONFIG_CAN_FLEXCAN=m
+CONFIG_CAN_MCP251XFD=m
 CONFIG_BT=m
 CONFIG_BT_HIDP=m
-# CONFIG_BT_HS is not set
 # CONFIG_BT_LE is not set
 CONFIG_BT_LEDS=y
 # CONFIG_BT_DEBUGFS is not set
@@ -198,6 +192,9 @@ CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_LL=y
 CONFIG_BT_HCIUART_BCM=y
 CONFIG_BT_HCIUART_QCA=y
+CONFIG_BT_HCIUART_MRVL=y
+CONFIG_BT_MRVL=m
+CONFIG_BT_MRVL_SDIO=m
 CONFIG_BT_QCOMSMD=m
 CONFIG_CFG80211=m
 CONFIG_MAC80211=m
@@ -210,6 +207,7 @@ CONFIG_NFC_NCI=m
 CONFIG_NFC_S3FWRN5_I2C=m
 CONFIG_PCI=y
 CONFIG_PCIEPORTBUS=y
+CONFIG_PCIEAER=y
 CONFIG_PCI_IOV=y
 CONFIG_PCI_PASID=y
 CONFIG_HOTPLUG_PCI=y
@@ -228,7 +226,6 @@ CONFIG_PCIE_ROCKCHIP_HOST=m
 CONFIG_PCIE_BRCMSTB=m
 CONFIG_PCI_IMX6=y
 CONFIG_PCI_LAYERSCAPE=y
-CONFIG_PCIE_LAYERSCAPE_GEN4=y
 CONFIG_PCI_HISI=y
 CONFIG_PCIE_QCOM=y
 CONFIG_PCIE_ARMADA_8K=y
@@ -236,6 +233,7 @@ CONFIG_PCIE_KIRIN=y
 CONFIG_PCIE_HISI_STB=y
 CONFIG_PCIE_TEGRA194_HOST=m
 CONFIG_PCIE_VISCONTI_HOST=y
+CONFIG_PCIE_LAYERSCAPE_GEN4=y
 CONFIG_PCI_ENDPOINT=y
 CONFIG_PCI_ENDPOINT_CONFIGFS=y
 CONFIG_PCI_EPF_TEST=m
@@ -243,8 +241,15 @@ CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_FW_LOADER_USER_HELPER=y
 CONFIG_HISILICON_LPC=y
-CONFIG_FSL_MC_BUS=y
 CONFIG_TEGRA_ACONNECT=m
+CONFIG_ARM_SCMI_PROTOCOL=y
+CONFIG_ARM_SCPI_PROTOCOL=y
+CONFIG_RASPBERRYPI_FIRMWARE=y
+CONFIG_INTEL_STRATIX10_SERVICE=y
+CONFIG_INTEL_STRATIX10_RSU=m
+CONFIG_EFI_CAPSULE_LOADER=y
+CONFIG_IMX_SCU=y
+CONFIG_IMX_SCU_PD=y
 CONFIG_GNSS=m
 CONFIG_GNSS_MTK_SERIAL=m
 CONFIG_MTD=y
@@ -259,13 +264,12 @@ CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_MTD_DATAFLASH=y
 CONFIG_MTD_SST25L=y
 CONFIG_MTD_RAW_NAND=y
+CONFIG_MTD_NAND_BRCMNAND=m
 CONFIG_MTD_NAND_DENALI_DT=y
 CONFIG_MTD_NAND_MARVELL=y
 CONFIG_MTD_NAND_FSL_IFC=y
 CONFIG_MTD_NAND_QCOM=y
 CONFIG_MTD_SPI_NOR=y
-CONFIG_MTK_DEVAPC=m
-CONFIG_SPI_CADENCE_QUADSPI=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_NBD=m
 CONFIG_VIRTIO_BLK=y
@@ -290,6 +294,7 @@ CONFIG_SCSI_UFS_EXYNOS=y
 CONFIG_ATA=y
 CONFIG_SATA_AHCI=y
 CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_AHCI_BRCM=m
 CONFIG_AHCI_CEVA=y
 CONFIG_AHCI_MVEBU=y
 CONFIG_AHCI_XGENE=y
@@ -309,11 +314,13 @@ CONFIG_MACVTAP=m
 CONFIG_TUN=y
 CONFIG_VETH=m
 CONFIG_VIRTIO_NET=y
+CONFIG_NET_DSA_BCM_SF2=m
 CONFIG_NET_DSA_MSCC_FELIX=m
 CONFIG_AMD_XGBE=y
 CONFIG_NET_XGENE=y
 CONFIG_ATL1C=m
 CONFIG_BCMGENET=m
+CONFIG_SYSTEMPORT=m
 CONFIG_BNX2X=m
 CONFIG_MACB=y
 CONFIG_THUNDER_NIC_PF=y
@@ -342,6 +349,7 @@ CONFIG_MLX5_CORE=m
 CONFIG_MLX5_CORE_EN=y
 CONFIG_QCOM_EMAC=m
 CONFIG_RMNET=m
+CONFIG_R8169=m
 CONFIG_SH_ETH=y
 CONFIG_RAVB=y
 CONFIG_SMC91X=y
@@ -351,13 +359,11 @@ CONFIG_SNI_NETSEC=y
 CONFIG_STMMAC_ETH=m
 CONFIG_TI_K3_AM65_CPSW_NUSS=y
 CONFIG_QCOM_IPA=m
-CONFIG_MDIO_BUS_MUX_MMIOREG=y
-CONFIG_MDIO_BUS_MUX_MULTIPLEXER=y
+CONFIG_MESON_GXL_PHY=m
 CONFIG_AQUANTIA_PHY=y
 CONFIG_BCM54140_PHY=m
 CONFIG_MARVELL_PHY=m
 CONFIG_MARVELL_10G_PHY=m
-CONFIG_MESON_GXL_PHY=m
 CONFIG_MICREL_PHY=y
 CONFIG_MICROSEMI_PHY=y
 CONFIG_AT803X_PHY=y
@@ -365,6 +371,9 @@ CONFIG_REALTEK_PHY=y
 CONFIG_ROCKCHIP_PHY=y
 CONFIG_DP83867_PHY=y
 CONFIG_VITESSE_PHY=y
+CONFIG_MDIO_BUS_MUX_MULTIPLEXER=y
+CONFIG_MDIO_BUS_MUX_MMIOREG=y
+CONFIG_USB_BRCMSTB=m
 CONFIG_USB_PEGASUS=m
 CONFIG_USB_RTL8150=m
 CONFIG_USB_RTL8152=m
@@ -382,6 +391,7 @@ CONFIG_ATH10K_SNOC=m
 CONFIG_WCN36XX=m
 CONFIG_BRCMFMAC=m
 CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
 CONFIG_MWIFIEX_PCIE=m
 CONFIG_WL18XX=m
 CONFIG_WLCORE_SDIO=m
@@ -473,6 +483,7 @@ CONFIG_SPI=y
 CONFIG_SPI_ARMADA_3700=y
 CONFIG_SPI_BCM2835=m
 CONFIG_SPI_BCM2835AUX=m
+CONFIG_SPI_CADENCE_QUADSPI=y
 CONFIG_SPI_DESIGNWARE=m
 CONFIG_SPI_DW_DMA=y
 CONFIG_SPI_DW_MMIO=m
@@ -487,6 +498,7 @@ CONFIG_SPI_ORION=y
 CONFIG_SPI_PL022=y
 CONFIG_SPI_ROCKCHIP=y
 CONFIG_SPI_RPCIF=m
+CONFIG_SPI_RSPI=m
 CONFIG_SPI_QCOM_QSPI=m
 CONFIG_SPI_QUP=y
 CONFIG_SPI_QCOM_GENI=m
@@ -495,8 +507,8 @@ CONFIG_SPI_SH_MSIOF=m
 CONFIG_SPI_SUN6I=y
 CONFIG_SPI_SPIDEV=m
 CONFIG_SPMI=y
-CONFIG_PINCTRL_SINGLE=y
 CONFIG_PINCTRL_MAX77620=y
+CONFIG_PINCTRL_SINGLE=y
 CONFIG_PINCTRL_OWL=y
 CONFIG_PINCTRL_S700=y
 CONFIG_PINCTRL_S900=y
@@ -524,6 +536,7 @@ CONFIG_PINCTRL_SDM845=y
 CONFIG_PINCTRL_SM8150=y
 CONFIG_PINCTRL_SM8250=y
 CONFIG_PINCTRL_SM8350=y
+CONFIG_PINCTRL_SM8450=y
 CONFIG_PINCTRL_LPASS_LPI=m
 CONFIG_GPIO_ALTERA=m
 CONFIG_GPIO_DAVINCI=y
@@ -544,9 +557,6 @@ CONFIG_GPIO_PCA953X_IRQ=y
 CONFIG_GPIO_BD9571MWV=m
 CONFIG_GPIO_MAX77620=y
 CONFIG_GPIO_SL28CPLD=m
-CONFIG_POWER_AVS=y
-CONFIG_QCOM_CPR=y
-CONFIG_ROCKCHIP_IODOMAIN=y
 CONFIG_POWER_RESET_MSM=y
 CONFIG_POWER_RESET_QCOM_PON=m
 CONFIG_POWER_RESET_XGENE=y
@@ -554,12 +564,13 @@ CONFIG_POWER_RESET_SYSCON=y
 CONFIG_SYSCON_REBOOT_MODE=y
 CONFIG_BATTERY_SBS=m
 CONFIG_BATTERY_BQ27XXX=y
-CONFIG_SENSORS_ARM_SCMI=y
 CONFIG_BATTERY_MAX17042=m
 CONFIG_CHARGER_BQ25890=m
 CONFIG_CHARGER_BQ25980=m
+CONFIG_SENSORS_ARM_SCMI=y
 CONFIG_SENSORS_ARM_SCPI=y
 CONFIG_SENSORS_JC42=m
+CONFIG_SENSORS_LM75=m
 CONFIG_SENSORS_LM90=m
 CONFIG_SENSORS_PWM_FAN=m
 CONFIG_SENSORS_RASPBERRYPI_HWMON=m
@@ -569,20 +580,21 @@ CONFIG_SENSORS_INA3221=m
 CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
 CONFIG_CPU_THERMAL=y
 CONFIG_THERMAL_EMULATION=y
-CONFIG_QORIQ_THERMAL=m
-CONFIG_SUN8I_THERMAL=y
 CONFIG_IMX_SC_THERMAL=m
 CONFIG_IMX8MM_THERMAL=m
+CONFIG_QORIQ_THERMAL=m
+CONFIG_SUN8I_THERMAL=y
 CONFIG_ROCKCHIP_THERMAL=m
 CONFIG_RCAR_THERMAL=y
 CONFIG_RCAR_GEN3_THERMAL=y
+CONFIG_RZG2L_THERMAL=y
 CONFIG_ARMADA_THERMAL=y
 CONFIG_BCM2711_THERMAL=m
 CONFIG_BCM2835_THERMAL=m
 CONFIG_BRCMSTB_THERMAL=m
 CONFIG_EXYNOS_THERMAL=y
-CONFIG_TEGRA_BPMP_THERMAL=m
 CONFIG_TEGRA_SOCTHERM=m
+CONFIG_TEGRA_BPMP_THERMAL=m
 CONFIG_QCOM_TSENS=y
 CONFIG_QCOM_SPMI_TEMP_ALARM=m
 CONFIG_QCOM_LMH=m
@@ -591,8 +603,8 @@ CONFIG_WATCHDOG=y
 CONFIG_SL28CPLD_WATCHDOG=m
 CONFIG_ARM_SP805_WATCHDOG=y
 CONFIG_ARM_SBSA_WATCHDOG=y
-CONFIG_ARM_SMC_WATCHDOG=y
 CONFIG_S3C2410_WATCHDOG=y
+CONFIG_BCM7038_WDT=m
 CONFIG_DW_WATCHDOG=y
 CONFIG_SUNXI_WATCHDOG=m
 CONFIG_IMX2_WDT=y
@@ -600,7 +612,9 @@ CONFIG_IMX_SC_WDT=m
 CONFIG_QCOM_WDT=m
 CONFIG_MESON_GXBB_WATCHDOG=m
 CONFIG_MESON_WATCHDOG=m
+CONFIG_ARM_SMC_WATCHDOG=y
 CONFIG_RENESAS_WDT=y
+CONFIG_RENESAS_RZG2LWDT=y
 CONFIG_UNIPHIER_WATCHDOG=y
 CONFIG_BCM2835_WDT=y
 CONFIG_MFD_ALTERA_SYSMGR=y
@@ -652,16 +666,16 @@ CONFIG_MEDIA_CAMERA_SUPPORT=y
 CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
 CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
 CONFIG_MEDIA_SDR_SUPPORT=y
-CONFIG_MEDIA_CONTROLLER=y
-CONFIG_VIDEO_V4L2_SUBDEV_API=y
 CONFIG_MEDIA_PLATFORM_SUPPORT=y
 # CONFIG_DVB_NET is not set
 CONFIG_MEDIA_USB_SUPPORT=y
 CONFIG_USB_VIDEO_CLASS=m
 CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_VIDEO_QCOM_CAMSS=m
 CONFIG_VIDEO_RCAR_CSI2=m
 CONFIG_VIDEO_RCAR_VIN=m
 CONFIG_VIDEO_SUN6I_CSI=m
+CONFIG_VIDEO_RCAR_ISP=m
 CONFIG_V4L_MEM2MEM_DRIVERS=y
 CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m
 CONFIG_VIDEO_SAMSUNG_S5P_MFC=m
@@ -675,7 +689,6 @@ CONFIG_VIDEO_RCAR_DRIF=m
 CONFIG_VIDEO_IMX219=m
 CONFIG_VIDEO_OV5640=m
 CONFIG_VIDEO_OV5645=m
-CONFIG_VIDEO_QCOM_CAMSS=m
 CONFIG_DRM=m
 CONFIG_DRM_I2C_NXP_TDA998X=m
 CONFIG_DRM_MALI_DISPLAY=m
@@ -696,30 +709,30 @@ CONFIG_ROCKCHIP_INNO_HDMI=y
 CONFIG_ROCKCHIP_LVDS=y
 CONFIG_DRM_RCAR_DU=m
 CONFIG_DRM_RCAR_DW_HDMI=m
+CONFIG_DRM_RCAR_MIPI_DSI=m
 CONFIG_DRM_SUN4I=m
 CONFIG_DRM_SUN6I_DSI=m
 CONFIG_DRM_SUN8I_DW_HDMI=m
 CONFIG_DRM_SUN8I_MIXER=m
 CONFIG_DRM_MSM=m
 CONFIG_DRM_TEGRA=m
+CONFIG_DRM_PANEL_BOE_TV101WUM_NL6=m
 CONFIG_DRM_PANEL_LVDS=m
 CONFIG_DRM_PANEL_SIMPLE=m
 CONFIG_DRM_PANEL_EDP=m
-CONFIG_DRM_PANEL_BOE_TV101WUM_NL6=m
 CONFIG_DRM_PANEL_MANTIX_MLAF057WE51=m
 CONFIG_DRM_PANEL_RAYDIUM_RM67191=m
 CONFIG_DRM_PANEL_SITRONIX_ST7703=m
 CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA=m
-CONFIG_DRM_DISPLAY_CONNECTOR=m
 CONFIG_DRM_LONTIUM_LT8912B=m
-CONFIG_DRM_NWL_MIPI_DSI=m
 CONFIG_DRM_LONTIUM_LT9611=m
+CONFIG_DRM_LONTIUM_LT9611UXC=m
+CONFIG_DRM_NWL_MIPI_DSI=m
 CONFIG_DRM_PARADE_PS8640=m
 CONFIG_DRM_SII902X=m
 CONFIG_DRM_SIMPLE_BRIDGE=m
 CONFIG_DRM_THINE_THC63LVD1024=m
 CONFIG_DRM_TI_SN65DSI86=m
-CONFIG_DRM_LONTIUM_LT9611UXC=m
 CONFIG_DRM_I2C_ADV7511=m
 CONFIG_DRM_I2C_ADV7511_AUDIO=y
 CONFIG_DRM_DW_HDMI_AHB_AUDIO=m
@@ -750,15 +763,14 @@ CONFIG_SND_HDA_TEGRA=m
 CONFIG_SND_HDA_CODEC_HDMI=m
 CONFIG_SND_SOC=y
 CONFIG_SND_BCM2835_SOC_I2S=m
-CONFIG_SND_SOC_FSL_SAI=m
 CONFIG_SND_SOC_FSL_ASRC=m
 CONFIG_SND_SOC_FSL_MICFIL=m
 CONFIG_SND_SOC_FSL_EASRC=m
 CONFIG_SND_IMX_SOC=m
 CONFIG_SND_SOC_IMX_SGTL5000=m
 CONFIG_SND_SOC_IMX_SPDIF=m
-CONFIG_SND_SOC_IMX_AUDMIX=m
 CONFIG_SND_SOC_FSL_ASOC_CARD=m
+CONFIG_SND_SOC_IMX_AUDMIX=m
 CONFIG_SND_MESON_AXG_SOUND_CARD=m
 CONFIG_SND_MESON_GX_SOUND_CARD=m
 CONFIG_SND_SOC_QCOM=m
@@ -805,18 +817,18 @@ CONFIG_SND_SOC_WM8960=m
 CONFIG_SND_SOC_WM8962=m
 CONFIG_SND_SOC_WM8978=m
 CONFIG_SND_SOC_WSA881X=m
+CONFIG_SND_SOC_NAU8822=m
 CONFIG_SND_SOC_LPASS_WSA_MACRO=m
 CONFIG_SND_SOC_LPASS_VA_MACRO=m
 CONFIG_SND_SIMPLE_CARD=m
 CONFIG_SND_AUDIO_GRAPH_CARD=m
+CONFIG_SND_AUDIO_GRAPH_CARD2=m
 CONFIG_HID_MULTITOUCH=m
 CONFIG_I2C_HID_ACPI=m
 CONFIG_I2C_HID_OF=m
-CONFIG_USB_CONN_GPIO=m
 CONFIG_USB=y
 CONFIG_USB_OTG=y
 CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_PCI=m
 CONFIG_USB_XHCI_PCI_RENESAS=m
 CONFIG_USB_XHCI_TEGRA=y
 CONFIG_USB_EHCI_HCD=y
@@ -829,6 +841,10 @@ CONFIG_USB_RENESAS_USBHS_HCD=m
 CONFIG_USB_RENESAS_USBHS=m
 CONFIG_USB_ACM=m
 CONFIG_USB_STORAGE=y
+CONFIG_USB_CDNS_SUPPORT=m
+CONFIG_USB_CDNS3=m
+CONFIG_USB_CDNS3_GADGET=y
+CONFIG_USB_CDNS3_HOST=y
 CONFIG_USB_MTU3=y
 CONFIG_USB_MUSB_HDRC=y
 CONFIG_USB_MUSB_SUNXI=y
@@ -863,8 +879,8 @@ CONFIG_TYPEC=m
 CONFIG_TYPEC_TCPM=m
 CONFIG_TYPEC_TCPCI=m
 CONFIG_TYPEC_FUSB302=m
-CONFIG_TYPEC_HD3SS3220=m
 CONFIG_TYPEC_TPS6598X=m
+CONFIG_TYPEC_HD3SS3220=m
 CONFIG_MMC=y
 CONFIG_MMC_BLOCK_MINORS=32
 CONFIG_MMC_ARMMMCI=y
@@ -935,16 +951,18 @@ CONFIG_RTC_DRV_TEGRA=y
 CONFIG_RTC_DRV_SNVS=m
 CONFIG_RTC_DRV_IMX_SC=m
 CONFIG_RTC_DRV_XGENE=y
+CONFIG_RTC_DRV_MT6397=m
 CONFIG_DMADEVICES=y
 CONFIG_DMA_BCM2835=y
 CONFIG_DMA_SUN6I=m
 CONFIG_FSL_EDMA=y
-CONFIG_IMX_SDMA=y
+CONFIG_IMX_SDMA=m
 CONFIG_K3_DMA=y
 CONFIG_MV_XOR=y
 CONFIG_MV_XOR_V2=y
 CONFIG_OWL_DMA=y
 CONFIG_PL330_DMA=y
+CONFIG_TEGRA186_GPC_DMA=m
 CONFIG_TEGRA20_APB_DMA=y
 CONFIG_TEGRA210_ADMA=m
 CONFIG_QCOM_BAM_DMA=y
@@ -962,7 +980,6 @@ CONFIG_VIRTIO_BALLOON=y
 CONFIG_VIRTIO_MMIO=y
 CONFIG_XEN_GNTDEV=y
 CONFIG_XEN_GRANT_DEV_ALLOC=y
-CONFIG_MFD_CROS_EC_DEV=y
 CONFIG_STAGING=y
 CONFIG_STAGING_MEDIA=y
 CONFIG_VIDEO_HANTRO=m
@@ -972,15 +989,14 @@ CONFIG_CROS_EC=y
 CONFIG_CROS_EC_I2C=y
 CONFIG_CROS_EC_SPI=y
 CONFIG_CROS_EC_CHARDEV=m
-CONFIG_COMMON_CLK_SCMI=y
 CONFIG_COMMON_CLK_RK808=y
+CONFIG_COMMON_CLK_SCMI=y
 CONFIG_COMMON_CLK_SCPI=y
 CONFIG_COMMON_CLK_CS2000_CP=y
 CONFIG_COMMON_CLK_FSL_SAI=y
 CONFIG_COMMON_CLK_S2MPS11=y
 CONFIG_COMMON_CLK_PWM=y
 CONFIG_COMMON_CLK_VC5=y
-CONFIG_COMMON_CLK_ZYNQMP=y
 CONFIG_COMMON_CLK_BD718XX=m
 CONFIG_CLK_RASPBERRYPI=m
 CONFIG_CLK_IMX8MM=y
@@ -996,8 +1012,8 @@ CONFIG_QCOM_CLK_APCS_MSM8916=y
 CONFIG_QCOM_CLK_APCC_MSM8996=y
 CONFIG_QCOM_CLK_SMD_RPM=y
 CONFIG_QCOM_CLK_RPMH=y
-CONFIG_IPQ_GCC_8074=y
 CONFIG_IPQ_GCC_6018=y
+CONFIG_IPQ_GCC_8074=y
 CONFIG_MSM_GCC_8916=y
 CONFIG_MSM_GCC_8994=y
 CONFIG_MSM_MMCC_8996=y
@@ -1006,21 +1022,19 @@ CONFIG_QCS_GCC_404=y
 CONFIG_SC_GCC_7180=y
 CONFIG_SC_GCC_7280=y
 CONFIG_SDM_CAMCC_845=m
-CONFIG_SDM_GCC_845=y
 CONFIG_SDM_GPUCC_845=y
 CONFIG_SDM_VIDEOCC_845=y
 CONFIG_SDM_DISPCC_845=y
-CONFIG_SM_GCC_8150=y
-CONFIG_SM_GCC_8250=y
 CONFIG_SM_GCC_8350=y
+CONFIG_SM_GCC_8450=y
 CONFIG_SM_GPUCC_8150=y
 CONFIG_SM_GPUCC_8250=y
-CONFIG_SM_DISPCC_8250=y
 CONFIG_QCOM_HFPLL=y
 CONFIG_CLK_GFM_LPASS_SM8250=m
 CONFIG_CLK_RCAR_USB2_CLOCK_SEL=y
 CONFIG_HWSPINLOCK=y
 CONFIG_HWSPINLOCK_QCOM=y
+CONFIG_RENESAS_OSTM=y
 CONFIG_ARM_MHU=y
 CONFIG_IMX_MBOX=y
 CONFIG_PLATFORM_MHU=y
@@ -1049,9 +1063,11 @@ CONFIG_RASPBERRYPI_POWER=y
 CONFIG_FSL_DPAA=y
 CONFIG_FSL_MC_DPIO=y
 CONFIG_FSL_RCPM=y
+CONFIG_MTK_DEVAPC=m
 CONFIG_MTK_PMIC_WRAP=y
 CONFIG_QCOM_AOSS_QMP=y
 CONFIG_QCOM_COMMAND_DB=y
+CONFIG_QCOM_CPR=y
 CONFIG_QCOM_GENI_SE=y
 CONFIG_QCOM_RMTFS_MEM=m
 CONFIG_QCOM_RPMH=y
@@ -1062,25 +1078,26 @@ CONFIG_QCOM_SMD_RPM=y
 CONFIG_QCOM_SMP2P=y
 CONFIG_QCOM_SMSM=y
 CONFIG_QCOM_SOCINFO=m
-CONFIG_QCOM_WCNSS_CTRL=m
 CONFIG_QCOM_STATS=m
+CONFIG_QCOM_WCNSS_CTRL=m
 CONFIG_QCOM_APR=m
-CONFIG_ARCH_R8A774A1=y
-CONFIG_ARCH_R8A774B1=y
-CONFIG_ARCH_R8A774C0=y
-CONFIG_ARCH_R8A774E1=y
+CONFIG_ARCH_R8A77995=y
+CONFIG_ARCH_R8A77990=y
 CONFIG_ARCH_R8A77950=y
 CONFIG_ARCH_R8A77951=y
+CONFIG_ARCH_R8A77965=y
 CONFIG_ARCH_R8A77960=y
 CONFIG_ARCH_R8A77961=y
-CONFIG_ARCH_R8A77965=y
-CONFIG_ARCH_R8A77970=y
+CONFIG_ARCH_R8A779F0=y
 CONFIG_ARCH_R8A77980=y
-CONFIG_ARCH_R8A77990=y
-CONFIG_ARCH_R8A77995=y
+CONFIG_ARCH_R8A77970=y
 CONFIG_ARCH_R8A779A0=y
-CONFIG_ARCH_R8A779F0=y
+CONFIG_ARCH_R8A774C0=y
+CONFIG_ARCH_R8A774E1=y
+CONFIG_ARCH_R8A774A1=y
+CONFIG_ARCH_R8A774B1=y
 CONFIG_ARCH_R9A07G044=y
+CONFIG_ROCKCHIP_IODOMAIN=y
 CONFIG_ROCKCHIP_PM_DOMAINS=y
 CONFIG_ARCH_TEGRA_132_SOC=y
 CONFIG_ARCH_TEGRA_210_SOC=y
@@ -1101,6 +1118,7 @@ CONFIG_QCOM_SPMI_VADC=m
 CONFIG_QCOM_SPMI_ADC5=m
 CONFIG_ROCKCHIP_SARADC=m
 CONFIG_RZG2L_ADC=m
+CONFIG_TI_ADS1015=m
 CONFIG_IIO_CROS_EC_SENSORS_CORE=m
 CONFIG_IIO_CROS_EC_SENSORS=m
 CONFIG_IIO_ST_LSM6DSX=m
@@ -1112,6 +1130,7 @@ CONFIG_IIO_CROS_EC_BARO=m
 CONFIG_MPL3115=m
 CONFIG_PWM=y
 CONFIG_PWM_BCM2835=m
+CONFIG_PWM_BRCMSTB=m
 CONFIG_PWM_CROS_EC=m
 CONFIG_PWM_IMX27=m
 CONFIG_PWM_MESON=m
@@ -1134,7 +1153,9 @@ CONFIG_RESET_RZG2L_USBPHY_CTRL=y
 CONFIG_RESET_TI_SCI=y
 CONFIG_PHY_XGENE=y
 CONFIG_PHY_SUN4I_USB=y
+CONFIG_PHY_CADENCE_SIERRA=m
 CONFIG_PHY_MIXEL_MIPI_DPHY=m
+CONFIG_PHY_FSL_IMX8M_PCIE=y
 CONFIG_PHY_HI6220_USB=y
 CONFIG_PHY_HISTB_COMBPHY=y
 CONFIG_PHY_HISI_INNO_USB2=y
@@ -1157,21 +1178,25 @@ CONFIG_PHY_SAMSUNG_UFS=y
 CONFIG_PHY_UNIPHIER_USB2=y
 CONFIG_PHY_UNIPHIER_USB3=y
 CONFIG_PHY_TEGRA_XUSB=y
+CONFIG_PHY_AM654_SERDES=m
+CONFIG_PHY_J721E_WIZ=m
 CONFIG_ARM_SMMU_V3_PMU=m
 CONFIG_FSL_IMX8_DDR_PMU=m
-CONFIG_HISI_PMU=y
 CONFIG_QCOM_L2_PMU=y
 CONFIG_QCOM_L3_PMU=y
+CONFIG_HISI_PMU=y
 CONFIG_NVMEM_IMX_OCOTP=y
 CONFIG_NVMEM_IMX_OCOTP_SCU=y
-CONFIG_QCOM_QFPROM=y
 CONFIG_MTK_EFUSE=y
+CONFIG_QCOM_QFPROM=y
 CONFIG_ROCKCHIP_EFUSE=y
 CONFIG_NVMEM_SUNXI_SID=y
 CONFIG_UNIPHIER_EFUSE=y
 CONFIG_MESON_EFUSE=m
 CONFIG_NVMEM_RMEM=m
+CONFIG_NVMEM_LAYERSCAPE_SFP=m
 CONFIG_FPGA=y
+CONFIG_FPGA_MGR_ALTERA_CVP=m
 CONFIG_FPGA_MGR_STRATIX10_SOC=m
 CONFIG_FPGA_BRIDGE=m
 CONFIG_ALTERA_FREEZE_BRIDGE=m
@@ -1179,10 +1204,10 @@ CONFIG_FPGA_REGION=m
 CONFIG_OF_FPGA_REGION=m
 CONFIG_TEE=y
 CONFIG_OPTEE=y
+CONFIG_MUX_MMIO=y
 CONFIG_SLIMBUS=m
 CONFIG_SLIM_QCOM_CTRL=m
 CONFIG_SLIM_QCOM_NGD_CTRL=m
-CONFIG_MUX_MMIO=y
 CONFIG_INTERCONNECT=y
 CONFIG_INTERCONNECT_IMX=m
 CONFIG_INTERCONNECT_IMX8MM=m
@@ -1196,6 +1221,7 @@ CONFIG_INTERCONNECT_QCOM_SDM845=y
 CONFIG_INTERCONNECT_QCOM_SM8150=m
 CONFIG_INTERCONNECT_QCOM_SM8250=m
 CONFIG_INTERCONNECT_QCOM_SM8350=m
+CONFIG_INTERCONNECT_QCOM_SM8450=m
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 CONFIG_EXT4_FS_POSIX_ACL=y
diff --git a/arch/arm64/crypto/Kconfig b/arch/arm64/crypto/Kconfig
index addfa413650b..2a965aa0188d 100644
--- a/arch/arm64/crypto/Kconfig
+++ b/arch/arm64/crypto/Kconfig
@@ -45,7 +45,7 @@ config CRYPTO_SM3_ARM64_CE
 	tristate "SM3 digest algorithm (ARMv8.2 Crypto Extensions)"
 	depends on KERNEL_MODE_NEON
 	select CRYPTO_HASH
-	select CRYPTO_SM3
+	select CRYPTO_LIB_SM3
 
 config CRYPTO_SM4_ARM64_CE
 	tristate "SM4 symmetric cipher (ARMv8.2 Crypto Extensions)"
diff --git a/arch/arm64/crypto/aes-glue.c b/arch/arm64/crypto/aes-glue.c
index 30b7cc6a7079..561dd2332571 100644
--- a/arch/arm64/crypto/aes-glue.c
+++ b/arch/arm64/crypto/aes-glue.c
@@ -24,7 +24,6 @@
 #ifdef USE_V8_CRYPTO_EXTENSIONS
 #define MODE			"ce"
 #define PRIO			300
-#define STRIDE			5
 #define aes_expandkey		ce_aes_expandkey
 #define aes_ecb_encrypt		ce_aes_ecb_encrypt
 #define aes_ecb_decrypt		ce_aes_ecb_decrypt
@@ -42,7 +41,6 @@ MODULE_DESCRIPTION("AES-ECB/CBC/CTR/XTS using ARMv8 Crypto Extensions");
 #else
 #define MODE			"neon"
 #define PRIO			200
-#define STRIDE			4
 #define aes_ecb_encrypt		neon_aes_ecb_encrypt
 #define aes_ecb_decrypt		neon_aes_ecb_decrypt
 #define aes_cbc_encrypt		neon_aes_cbc_encrypt
@@ -89,7 +87,7 @@ asmlinkage void aes_cbc_cts_decrypt(u8 out[], u8 const in[], u32 const rk[],
 				int rounds, int bytes, u8 const iv[]);
 
 asmlinkage void aes_ctr_encrypt(u8 out[], u8 const in[], u32 const rk[],
-				int rounds, int bytes, u8 ctr[], u8 finalbuf[]);
+				int rounds, int bytes, u8 ctr[]);
 
 asmlinkage void aes_xts_encrypt(u8 out[], u8 const in[], u32 const rk1[],
 				int rounds, int bytes, u32 const rk2[], u8 iv[],
@@ -458,26 +456,21 @@ static int __maybe_unused ctr_encrypt(struct skcipher_request *req)
 		unsigned int nbytes = walk.nbytes;
 		u8 *dst = walk.dst.virt.addr;
 		u8 buf[AES_BLOCK_SIZE];
-		unsigned int tail;
 
 		if (unlikely(nbytes < AES_BLOCK_SIZE))
-			src = memcpy(buf, src, nbytes);
+			src = dst = memcpy(buf + sizeof(buf) - nbytes,
+					   src, nbytes);
 		else if (nbytes < walk.total)
 			nbytes &= ~(AES_BLOCK_SIZE - 1);
 
 		kernel_neon_begin();
 		aes_ctr_encrypt(dst, src, ctx->key_enc, rounds, nbytes,
-				walk.iv, buf);
+				walk.iv);
 		kernel_neon_end();
 
-		tail = nbytes % (STRIDE * AES_BLOCK_SIZE);
-		if (tail > 0 && tail < AES_BLOCK_SIZE)
-			/*
-			 * The final partial block could not be returned using
-			 * an overlapping store, so it was passed via buf[]
-			 * instead.
-			 */
-			memcpy(dst + nbytes - tail, buf, tail);
+		if (unlikely(nbytes < AES_BLOCK_SIZE))
+			memcpy(walk.dst.virt.addr,
+			       buf + sizeof(buf) - nbytes, nbytes);
 
 		err = skcipher_walk_done(&walk, walk.nbytes - nbytes);
 	}
@@ -983,6 +976,7 @@ module_cpu_feature_match(AES, aes_init);
 module_init(aes_init);
 EXPORT_SYMBOL(neon_aes_ecb_encrypt);
 EXPORT_SYMBOL(neon_aes_cbc_encrypt);
+EXPORT_SYMBOL(neon_aes_ctr_encrypt);
 EXPORT_SYMBOL(neon_aes_xts_encrypt);
 EXPORT_SYMBOL(neon_aes_xts_decrypt);
 #endif
diff --git a/arch/arm64/crypto/aes-modes.S b/arch/arm64/crypto/aes-modes.S
index ff01f0167ba2..dc35eb0245c5 100644
--- a/arch/arm64/crypto/aes-modes.S
+++ b/arch/arm64/crypto/aes-modes.S
@@ -321,7 +321,7 @@ AES_FUNC_END(aes_cbc_cts_decrypt)
 
 	/*
 	 * aes_ctr_encrypt(u8 out[], u8 const in[], u8 const rk[], int rounds,
-	 *		   int bytes, u8 ctr[], u8 finalbuf[])
+	 *		   int bytes, u8 ctr[])
 	 */
 
 AES_FUNC_START(aes_ctr_encrypt)
@@ -414,8 +414,8 @@ ST5(	st1		{v4.16b}, [x0], #16		)
 .Lctrtail:
 	/* XOR up to MAX_STRIDE * 16 - 1 bytes of in/output with v0 ... v3/v4 */
 	mov		x16, #16
-	ands		x13, x4, #0xf
-	csel		x13, x13, x16, ne
+	ands		x6, x4, #0xf
+	csel		x13, x6, x16, ne
 
 ST5(	cmp		w4, #64 - (MAX_STRIDE << 4)	)
 ST5(	csel		x14, x16, xzr, gt		)
@@ -424,10 +424,10 @@ ST5(	csel		x14, x16, xzr, gt		)
 	cmp		w4, #32 - (MAX_STRIDE << 4)
 	csel		x16, x16, xzr, gt
 	cmp		w4, #16 - (MAX_STRIDE << 4)
-	ble		.Lctrtail1x
 
 	adr_l		x12, .Lcts_permute_table
 	add		x12, x12, x13
+	ble		.Lctrtail1x
 
 ST5(	ld1		{v5.16b}, [x1], x14		)
 	ld1		{v6.16b}, [x1], x15
@@ -462,11 +462,19 @@ ST5(	st1		{v5.16b}, [x0], x14		)
 	b		.Lctrout
 
 .Lctrtail1x:
-	csel		x0, x0, x6, eq		// use finalbuf if less than a full block
+	sub		x7, x6, #16
+	csel		x6, x6, x7, eq
+	add		x1, x1, x6
+	add		x0, x0, x6
 	ld1		{v5.16b}, [x1]
+	ld1		{v6.16b}, [x0]
 ST5(	mov		v3.16b, v4.16b			)
 	encrypt_block	v3, w3, x2, x8, w7
+	ld1		{v10.16b-v11.16b}, [x12]
+	tbl		v3.16b, {v3.16b}, v10.16b
+	sshr		v11.16b, v11.16b, #7
 	eor		v5.16b, v5.16b, v3.16b
+	bif		v5.16b, v6.16b, v11.16b
 	st1		{v5.16b}, [x0]
 	b		.Lctrout
 AES_FUNC_END(aes_ctr_encrypt)
diff --git a/arch/arm64/crypto/aes-neonbs-core.S b/arch/arm64/crypto/aes-neonbs-core.S
index a3405b8c344b..d427f4556b6e 100644
--- a/arch/arm64/crypto/aes-neonbs-core.S
+++ b/arch/arm64/crypto/aes-neonbs-core.S
@@ -735,119 +735,67 @@ SYM_FUNC_END(aesbs_cbc_decrypt)
 	 *		     int blocks, u8 iv[])
 	 */
 SYM_FUNC_START_LOCAL(__xts_crypt8)
-	mov		x6, #1
-	lsl		x6, x6, x23
-	subs		w23, w23, #8
-	csel		x23, x23, xzr, pl
-	csel		x6, x6, xzr, mi
+	movi		v18.2s, #0x1
+	movi		v19.2s, #0x87
+	uzp1		v18.4s, v18.4s, v19.4s
+
+	ld1		{v0.16b-v3.16b}, [x1], #64
+	ld1		{v4.16b-v7.16b}, [x1], #64
+
+	next_tweak	v26, v25, v18, v19
+	next_tweak	v27, v26, v18, v19
+	next_tweak	v28, v27, v18, v19
+	next_tweak	v29, v28, v18, v19
+	next_tweak	v30, v29, v18, v19
+	next_tweak	v31, v30, v18, v19
+	next_tweak	v16, v31, v18, v19
+	next_tweak	v17, v16, v18, v19
 
-	ld1		{v0.16b}, [x20], #16
-	next_tweak	v26, v25, v30, v31
 	eor		v0.16b, v0.16b, v25.16b
-	tbnz		x6, #1, 0f
-
-	ld1		{v1.16b}, [x20], #16
-	next_tweak	v27, v26, v30, v31
 	eor		v1.16b, v1.16b, v26.16b
-	tbnz		x6, #2, 0f
-
-	ld1		{v2.16b}, [x20], #16
-	next_tweak	v28, v27, v30, v31
 	eor		v2.16b, v2.16b, v27.16b
-	tbnz		x6, #3, 0f
-
-	ld1		{v3.16b}, [x20], #16
-	next_tweak	v29, v28, v30, v31
 	eor		v3.16b, v3.16b, v28.16b
-	tbnz		x6, #4, 0f
-
-	ld1		{v4.16b}, [x20], #16
-	str		q29, [sp, #.Lframe_local_offset]
 	eor		v4.16b, v4.16b, v29.16b
-	next_tweak	v29, v29, v30, v31
-	tbnz		x6, #5, 0f
-
-	ld1		{v5.16b}, [x20], #16
-	str		q29, [sp, #.Lframe_local_offset + 16]
-	eor		v5.16b, v5.16b, v29.16b
-	next_tweak	v29, v29, v30, v31
-	tbnz		x6, #6, 0f
-
-	ld1		{v6.16b}, [x20], #16
-	str		q29, [sp, #.Lframe_local_offset + 32]
-	eor		v6.16b, v6.16b, v29.16b
-	next_tweak	v29, v29, v30, v31
-	tbnz		x6, #7, 0f
+	eor		v5.16b, v5.16b, v30.16b
+	eor		v6.16b, v6.16b, v31.16b
+	eor		v7.16b, v7.16b, v16.16b
 
-	ld1		{v7.16b}, [x20], #16
-	str		q29, [sp, #.Lframe_local_offset + 48]
-	eor		v7.16b, v7.16b, v29.16b
-	next_tweak	v29, v29, v30, v31
+	stp		q16, q17, [sp, #16]
 
-0:	mov		bskey, x21
-	mov		rounds, x22
+	mov		bskey, x2
+	mov		rounds, x3
 	br		x16
 SYM_FUNC_END(__xts_crypt8)
 
 	.macro		__xts_crypt, do8, o0, o1, o2, o3, o4, o5, o6, o7
-	frame_push	6, 64
-
-	mov		x19, x0
-	mov		x20, x1
-	mov		x21, x2
-	mov		x22, x3
-	mov		x23, x4
-	mov		x24, x5
+	stp		x29, x30, [sp, #-48]!
+	mov		x29, sp
 
-	movi		v30.2s, #0x1
-	movi		v25.2s, #0x87
-	uzp1		v30.4s, v30.4s, v25.4s
-	ld1		{v25.16b}, [x24]
+	ld1		{v25.16b}, [x5]
 
-99:	adr		x16, \do8
+0:	adr		x16, \do8
 	bl		__xts_crypt8
 
-	ldp		q16, q17, [sp, #.Lframe_local_offset]
-	ldp		q18, q19, [sp, #.Lframe_local_offset + 32]
+	eor		v16.16b, \o0\().16b, v25.16b
+	eor		v17.16b, \o1\().16b, v26.16b
+	eor		v18.16b, \o2\().16b, v27.16b
+	eor		v19.16b, \o3\().16b, v28.16b
 
-	eor		\o0\().16b, \o0\().16b, v25.16b
-	eor		\o1\().16b, \o1\().16b, v26.16b
-	eor		\o2\().16b, \o2\().16b, v27.16b
-	eor		\o3\().16b, \o3\().16b, v28.16b
+	ldp		q24, q25, [sp, #16]
 
-	st1		{\o0\().16b}, [x19], #16
-	mov		v25.16b, v26.16b
-	tbnz		x6, #1, 1f
-	st1		{\o1\().16b}, [x19], #16
-	mov		v25.16b, v27.16b
-	tbnz		x6, #2, 1f
-	st1		{\o2\().16b}, [x19], #16
-	mov		v25.16b, v28.16b
-	tbnz		x6, #3, 1f
-	st1		{\o3\().16b}, [x19], #16
-	mov		v25.16b, v29.16b
-	tbnz		x6, #4, 1f
+	eor		v20.16b, \o4\().16b, v29.16b
+	eor		v21.16b, \o5\().16b, v30.16b
+	eor		v22.16b, \o6\().16b, v31.16b
+	eor		v23.16b, \o7\().16b, v24.16b
 
-	eor		\o4\().16b, \o4\().16b, v16.16b
-	eor		\o5\().16b, \o5\().16b, v17.16b
-	eor		\o6\().16b, \o6\().16b, v18.16b
-	eor		\o7\().16b, \o7\().16b, v19.16b
+	st1		{v16.16b-v19.16b}, [x0], #64
+	st1		{v20.16b-v23.16b}, [x0], #64
 
-	st1		{\o4\().16b}, [x19], #16
-	tbnz		x6, #5, 1f
-	st1		{\o5\().16b}, [x19], #16
-	tbnz		x6, #6, 1f
-	st1		{\o6\().16b}, [x19], #16
-	tbnz		x6, #7, 1f
-	st1		{\o7\().16b}, [x19], #16
+	subs		x4, x4, #8
+	b.gt		0b
 
-	cbz		x23, 1f
-	st1		{v25.16b}, [x24]
-
-	b		99b
-
-1:	st1		{v25.16b}, [x24]
-	frame_pop
+	st1		{v25.16b}, [x5]
+	ldp		x29, x30, [sp], #48
 	ret
 	.endm
 
@@ -869,133 +817,51 @@ SYM_FUNC_END(aesbs_xts_decrypt)
 
 	/*
 	 * aesbs_ctr_encrypt(u8 out[], u8 const in[], u8 const rk[],
-	 *		     int rounds, int blocks, u8 iv[], u8 final[])
+	 *		     int rounds, int blocks, u8 iv[])
 	 */
 SYM_FUNC_START(aesbs_ctr_encrypt)
-	frame_push	8
-
-	mov		x19, x0
-	mov		x20, x1
-	mov		x21, x2
-	mov		x22, x3
-	mov		x23, x4
-	mov		x24, x5
-	mov		x25, x6
+	stp		x29, x30, [sp, #-16]!
+	mov		x29, sp
 
-	cmp		x25, #0
-	cset		x26, ne
-	add		x23, x23, x26		// do one extra block if final
-
-	ldp		x7, x8, [x24]
-	ld1		{v0.16b}, [x24]
+	ldp		x7, x8, [x5]
+	ld1		{v0.16b}, [x5]
 CPU_LE(	rev		x7, x7		)
 CPU_LE(	rev		x8, x8		)
 	adds		x8, x8, #1
 	adc		x7, x7, xzr
 
-99:	mov		x9, #1
-	lsl		x9, x9, x23
-	subs		w23, w23, #8
-	csel		x23, x23, xzr, pl
-	csel		x9, x9, xzr, le
-
-	tbnz		x9, #1, 0f
-	next_ctr	v1
-	tbnz		x9, #2, 0f
+0:	next_ctr	v1
 	next_ctr	v2
-	tbnz		x9, #3, 0f
 	next_ctr	v3
-	tbnz		x9, #4, 0f
 	next_ctr	v4
-	tbnz		x9, #5, 0f
 	next_ctr	v5
-	tbnz		x9, #6, 0f
 	next_ctr	v6
-	tbnz		x9, #7, 0f
 	next_ctr	v7
 
-0:	mov		bskey, x21
-	mov		rounds, x22
+	mov		bskey, x2
+	mov		rounds, x3
 	bl		aesbs_encrypt8
 
-	lsr		x9, x9, x26		// disregard the extra block
-	tbnz		x9, #0, 0f
-
-	ld1		{v8.16b}, [x20], #16
-	eor		v0.16b, v0.16b, v8.16b
-	st1		{v0.16b}, [x19], #16
-	tbnz		x9, #1, 1f
+	ld1		{ v8.16b-v11.16b}, [x1], #64
+	ld1		{v12.16b-v15.16b}, [x1], #64
 
-	ld1		{v9.16b}, [x20], #16
-	eor		v1.16b, v1.16b, v9.16b
-	st1		{v1.16b}, [x19], #16
-	tbnz		x9, #2, 2f
+	eor		v8.16b, v0.16b, v8.16b
+	eor		v9.16b, v1.16b, v9.16b
+	eor		v10.16b, v4.16b, v10.16b
+	eor		v11.16b, v6.16b, v11.16b
+	eor		v12.16b, v3.16b, v12.16b
+	eor		v13.16b, v7.16b, v13.16b
+	eor		v14.16b, v2.16b, v14.16b
+	eor		v15.16b, v5.16b, v15.16b
 
-	ld1		{v10.16b}, [x20], #16
-	eor		v4.16b, v4.16b, v10.16b
-	st1		{v4.16b}, [x19], #16
-	tbnz		x9, #3, 3f
+	st1		{ v8.16b-v11.16b}, [x0], #64
+	st1		{v12.16b-v15.16b}, [x0], #64
 
-	ld1		{v11.16b}, [x20], #16
-	eor		v6.16b, v6.16b, v11.16b
-	st1		{v6.16b}, [x19], #16
-	tbnz		x9, #4, 4f
-
-	ld1		{v12.16b}, [x20], #16
-	eor		v3.16b, v3.16b, v12.16b
-	st1		{v3.16b}, [x19], #16
-	tbnz		x9, #5, 5f
-
-	ld1		{v13.16b}, [x20], #16
-	eor		v7.16b, v7.16b, v13.16b
-	st1		{v7.16b}, [x19], #16
-	tbnz		x9, #6, 6f
+	next_ctr	v0
+	subs		x4, x4, #8
+	b.gt		0b
 
-	ld1		{v14.16b}, [x20], #16
-	eor		v2.16b, v2.16b, v14.16b
-	st1		{v2.16b}, [x19], #16
-	tbnz		x9, #7, 7f
-
-	ld1		{v15.16b}, [x20], #16
-	eor		v5.16b, v5.16b, v15.16b
-	st1		{v5.16b}, [x19], #16
-
-8:	next_ctr	v0
-	st1		{v0.16b}, [x24]
-	cbz		x23, .Lctr_done
-
-	b		99b
-
-.Lctr_done:
-	frame_pop
+	st1		{v0.16b}, [x5]
+	ldp		x29, x30, [sp], #16
 	ret
-
-	/*
-	 * If we are handling the tail of the input (x6 != NULL), return the
-	 * final keystream block back to the caller.
-	 */
-0:	cbz		x25, 8b
-	st1		{v0.16b}, [x25]
-	b		8b
-1:	cbz		x25, 8b
-	st1		{v1.16b}, [x25]
-	b		8b
-2:	cbz		x25, 8b
-	st1		{v4.16b}, [x25]
-	b		8b
-3:	cbz		x25, 8b
-	st1		{v6.16b}, [x25]
-	b		8b
-4:	cbz		x25, 8b
-	st1		{v3.16b}, [x25]
-	b		8b
-5:	cbz		x25, 8b
-	st1		{v7.16b}, [x25]
-	b		8b
-6:	cbz		x25, 8b
-	st1		{v2.16b}, [x25]
-	b		8b
-7:	cbz		x25, 8b
-	st1		{v5.16b}, [x25]
-	b		8b
 SYM_FUNC_END(aesbs_ctr_encrypt)
diff --git a/arch/arm64/crypto/aes-neonbs-glue.c b/arch/arm64/crypto/aes-neonbs-glue.c
index 8df6ad8cb09d..bac4cabef607 100644
--- a/arch/arm64/crypto/aes-neonbs-glue.c
+++ b/arch/arm64/crypto/aes-neonbs-glue.c
@@ -34,7 +34,7 @@ asmlinkage void aesbs_cbc_decrypt(u8 out[], u8 const in[], u8 const rk[],
 				  int rounds, int blocks, u8 iv[]);
 
 asmlinkage void aesbs_ctr_encrypt(u8 out[], u8 const in[], u8 const rk[],
-				  int rounds, int blocks, u8 iv[], u8 final[]);
+				  int rounds, int blocks, u8 iv[]);
 
 asmlinkage void aesbs_xts_encrypt(u8 out[], u8 const in[], u8 const rk[],
 				  int rounds, int blocks, u8 iv[]);
@@ -46,6 +46,8 @@ asmlinkage void neon_aes_ecb_encrypt(u8 out[], u8 const in[], u32 const rk[],
 				     int rounds, int blocks);
 asmlinkage void neon_aes_cbc_encrypt(u8 out[], u8 const in[], u32 const rk[],
 				     int rounds, int blocks, u8 iv[]);
+asmlinkage void neon_aes_ctr_encrypt(u8 out[], u8 const in[], u32 const rk[],
+				     int rounds, int bytes, u8 ctr[]);
 asmlinkage void neon_aes_xts_encrypt(u8 out[], u8 const in[],
 				     u32 const rk1[], int rounds, int bytes,
 				     u32 const rk2[], u8 iv[], int first);
@@ -58,7 +60,7 @@ struct aesbs_ctx {
 	int	rounds;
 } __aligned(AES_BLOCK_SIZE);
 
-struct aesbs_cbc_ctx {
+struct aesbs_cbc_ctr_ctx {
 	struct aesbs_ctx	key;
 	u32			enc[AES_MAX_KEYLENGTH_U32];
 };
@@ -128,10 +130,10 @@ static int ecb_decrypt(struct skcipher_request *req)
 	return __ecb_crypt(req, aesbs_ecb_decrypt);
 }
 
-static int aesbs_cbc_setkey(struct crypto_skcipher *tfm, const u8 *in_key,
+static int aesbs_cbc_ctr_setkey(struct crypto_skcipher *tfm, const u8 *in_key,
 			    unsigned int key_len)
 {
-	struct aesbs_cbc_ctx *ctx = crypto_skcipher_ctx(tfm);
+	struct aesbs_cbc_ctr_ctx *ctx = crypto_skcipher_ctx(tfm);
 	struct crypto_aes_ctx rk;
 	int err;
 
@@ -154,7 +156,7 @@ static int aesbs_cbc_setkey(struct crypto_skcipher *tfm, const u8 *in_key,
 static int cbc_encrypt(struct skcipher_request *req)
 {
 	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
-	struct aesbs_cbc_ctx *ctx = crypto_skcipher_ctx(tfm);
+	struct aesbs_cbc_ctr_ctx *ctx = crypto_skcipher_ctx(tfm);
 	struct skcipher_walk walk;
 	int err;
 
@@ -177,7 +179,7 @@ static int cbc_encrypt(struct skcipher_request *req)
 static int cbc_decrypt(struct skcipher_request *req)
 {
 	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
-	struct aesbs_cbc_ctx *ctx = crypto_skcipher_ctx(tfm);
+	struct aesbs_cbc_ctr_ctx *ctx = crypto_skcipher_ctx(tfm);
 	struct skcipher_walk walk;
 	int err;
 
@@ -205,40 +207,32 @@ static int cbc_decrypt(struct skcipher_request *req)
 static int ctr_encrypt(struct skcipher_request *req)
 {
 	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
-	struct aesbs_ctx *ctx = crypto_skcipher_ctx(tfm);
+	struct aesbs_cbc_ctr_ctx *ctx = crypto_skcipher_ctx(tfm);
 	struct skcipher_walk walk;
-	u8 buf[AES_BLOCK_SIZE];
 	int err;
 
 	err = skcipher_walk_virt(&walk, req, false);
 
 	while (walk.nbytes > 0) {
-		unsigned int blocks = walk.nbytes / AES_BLOCK_SIZE;
-		u8 *final = (walk.total % AES_BLOCK_SIZE) ? buf : NULL;
-
-		if (walk.nbytes < walk.total) {
-			blocks = round_down(blocks,
-					    walk.stride / AES_BLOCK_SIZE);
-			final = NULL;
-		}
+		int blocks = (walk.nbytes / AES_BLOCK_SIZE) & ~7;
+		int nbytes = walk.nbytes % (8 * AES_BLOCK_SIZE);
+		const u8 *src = walk.src.virt.addr;
+		u8 *dst = walk.dst.virt.addr;
 
 		kernel_neon_begin();
-		aesbs_ctr_encrypt(walk.dst.virt.addr, walk.src.virt.addr,
-				  ctx->rk, ctx->rounds, blocks, walk.iv, final);
-		kernel_neon_end();
-
-		if (final) {
-			u8 *dst = walk.dst.virt.addr + blocks * AES_BLOCK_SIZE;
-			u8 *src = walk.src.virt.addr + blocks * AES_BLOCK_SIZE;
-
-			crypto_xor_cpy(dst, src, final,
-				       walk.total % AES_BLOCK_SIZE);
-
-			err = skcipher_walk_done(&walk, 0);
-			break;
+		if (blocks >= 8) {
+			aesbs_ctr_encrypt(dst, src, ctx->key.rk, ctx->key.rounds,
+					  blocks, walk.iv);
+			dst += blocks * AES_BLOCK_SIZE;
+			src += blocks * AES_BLOCK_SIZE;
 		}
-		err = skcipher_walk_done(&walk,
-					 walk.nbytes - blocks * AES_BLOCK_SIZE);
+		if (nbytes && walk.nbytes == walk.total) {
+			neon_aes_ctr_encrypt(dst, src, ctx->enc, ctx->key.rounds,
+					     nbytes, walk.iv);
+			nbytes = 0;
+		}
+		kernel_neon_end();
+		err = skcipher_walk_done(&walk, nbytes);
 	}
 	return err;
 }
@@ -308,23 +302,18 @@ static int __xts_crypt(struct skcipher_request *req, bool encrypt,
 		return err;
 
 	while (walk.nbytes >= AES_BLOCK_SIZE) {
-		unsigned int blocks = walk.nbytes / AES_BLOCK_SIZE;
-
-		if (walk.nbytes < walk.total || walk.nbytes % AES_BLOCK_SIZE)
-			blocks = round_down(blocks,
-					    walk.stride / AES_BLOCK_SIZE);
-
+		int blocks = (walk.nbytes / AES_BLOCK_SIZE) & ~7;
 		out = walk.dst.virt.addr;
 		in = walk.src.virt.addr;
 		nbytes = walk.nbytes;
 
 		kernel_neon_begin();
-		if (likely(blocks > 6)) { /* plain NEON is faster otherwise */
-			if (first)
+		if (blocks >= 8) {
+			if (first == 1)
 				neon_aes_ecb_encrypt(walk.iv, walk.iv,
 						     ctx->twkey,
 						     ctx->key.rounds, 1);
-			first = 0;
+			first = 2;
 
 			fn(out, in, ctx->key.rk, ctx->key.rounds, blocks,
 			   walk.iv);
@@ -333,10 +322,17 @@ static int __xts_crypt(struct skcipher_request *req, bool encrypt,
 			in += blocks * AES_BLOCK_SIZE;
 			nbytes -= blocks * AES_BLOCK_SIZE;
 		}
-
-		if (walk.nbytes == walk.total && nbytes > 0)
-			goto xts_tail;
-
+		if (walk.nbytes == walk.total && nbytes > 0) {
+			if (encrypt)
+				neon_aes_xts_encrypt(out, in, ctx->cts.key_enc,
+						     ctx->key.rounds, nbytes,
+						     ctx->twkey, walk.iv, first);
+			else
+				neon_aes_xts_decrypt(out, in, ctx->cts.key_dec,
+						     ctx->key.rounds, nbytes,
+						     ctx->twkey, walk.iv, first);
+			nbytes = first = 0;
+		}
 		kernel_neon_end();
 		err = skcipher_walk_done(&walk, nbytes);
 	}
@@ -361,13 +357,12 @@ static int __xts_crypt(struct skcipher_request *req, bool encrypt,
 	nbytes = walk.nbytes;
 
 	kernel_neon_begin();
-xts_tail:
 	if (encrypt)
 		neon_aes_xts_encrypt(out, in, ctx->cts.key_enc, ctx->key.rounds,
-				     nbytes, ctx->twkey, walk.iv, first ?: 2);
+				     nbytes, ctx->twkey, walk.iv, first);
 	else
 		neon_aes_xts_decrypt(out, in, ctx->cts.key_dec, ctx->key.rounds,
-				     nbytes, ctx->twkey, walk.iv, first ?: 2);
+				     nbytes, ctx->twkey, walk.iv, first);
 	kernel_neon_end();
 
 	return skcipher_walk_done(&walk, 0);
@@ -402,14 +397,14 @@ static struct skcipher_alg aes_algs[] = { {
 	.base.cra_driver_name	= "cbc-aes-neonbs",
 	.base.cra_priority	= 250,
 	.base.cra_blocksize	= AES_BLOCK_SIZE,
-	.base.cra_ctxsize	= sizeof(struct aesbs_cbc_ctx),
+	.base.cra_ctxsize	= sizeof(struct aesbs_cbc_ctr_ctx),
 	.base.cra_module	= THIS_MODULE,
 
 	.min_keysize		= AES_MIN_KEY_SIZE,
 	.max_keysize		= AES_MAX_KEY_SIZE,
 	.walksize		= 8 * AES_BLOCK_SIZE,
 	.ivsize			= AES_BLOCK_SIZE,
-	.setkey			= aesbs_cbc_setkey,
+	.setkey			= aesbs_cbc_ctr_setkey,
 	.encrypt		= cbc_encrypt,
 	.decrypt		= cbc_decrypt,
 }, {
@@ -417,7 +412,7 @@ static struct skcipher_alg aes_algs[] = { {
 	.base.cra_driver_name	= "ctr-aes-neonbs",
 	.base.cra_priority	= 250,
 	.base.cra_blocksize	= 1,
-	.base.cra_ctxsize	= sizeof(struct aesbs_ctx),
+	.base.cra_ctxsize	= sizeof(struct aesbs_cbc_ctr_ctx),
 	.base.cra_module	= THIS_MODULE,
 
 	.min_keysize		= AES_MIN_KEY_SIZE,
@@ -425,7 +420,7 @@ static struct skcipher_alg aes_algs[] = { {
 	.chunksize		= AES_BLOCK_SIZE,
 	.walksize		= 8 * AES_BLOCK_SIZE,
 	.ivsize			= AES_BLOCK_SIZE,
-	.setkey			= aesbs_setkey,
+	.setkey			= aesbs_cbc_ctr_setkey,
 	.encrypt		= ctr_encrypt,
 	.decrypt		= ctr_encrypt,
 }, {
diff --git a/arch/arm64/crypto/sha3-ce-glue.c b/arch/arm64/crypto/sha3-ce-glue.c
index 8c65cecf560a..250e1377c481 100644
--- a/arch/arm64/crypto/sha3-ce-glue.c
+++ b/arch/arm64/crypto/sha3-ce-glue.c
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: GPL-2.0 */
+// SPDX-License-Identifier: GPL-2.0
 /*
  * sha3-ce-glue.c - core SHA-3 transform using v8.2 Crypto Extensions
  *
diff --git a/arch/arm64/crypto/sha512-armv8.pl b/arch/arm64/crypto/sha512-armv8.pl
index 2d8655d5b1af..35ec9ae99fe1 100644
--- a/arch/arm64/crypto/sha512-armv8.pl
+++ b/arch/arm64/crypto/sha512-armv8.pl
@@ -43,7 +43,7 @@
 #	on Cortex-A53 (or by 4 cycles per round).
 # (***)	Super-impressive coefficients over gcc-generated code are
 #	indication of some compiler "pathology", most notably code
-#	generated with -mgeneral-regs-only is significanty faster
+#	generated with -mgeneral-regs-only is significantly faster
 #	and the gap is only 40-90%.
 #
 # October 2016.
diff --git a/arch/arm64/crypto/sha512-ce-glue.c b/arch/arm64/crypto/sha512-ce-glue.c
index e62a094a9d52..94cb7580deb7 100644
--- a/arch/arm64/crypto/sha512-ce-glue.c
+++ b/arch/arm64/crypto/sha512-ce-glue.c
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: GPL-2.0 */
+// SPDX-License-Identifier: GPL-2.0
 /*
  * sha512-ce-glue.c - SHA-384/SHA-512 using ARMv8 Crypto Extensions
  *
diff --git a/arch/arm64/crypto/sm3-ce-glue.c b/arch/arm64/crypto/sm3-ce-glue.c
index d71faca322f2..ee98954ae8ca 100644
--- a/arch/arm64/crypto/sm3-ce-glue.c
+++ b/arch/arm64/crypto/sm3-ce-glue.c
@@ -26,8 +26,10 @@ asmlinkage void sm3_ce_transform(struct sm3_state *sst, u8 const *src,
 static int sm3_ce_update(struct shash_desc *desc, const u8 *data,
 			 unsigned int len)
 {
-	if (!crypto_simd_usable())
-		return crypto_sm3_update(desc, data, len);
+	if (!crypto_simd_usable()) {
+		sm3_update(shash_desc_ctx(desc), data, len);
+		return 0;
+	}
 
 	kernel_neon_begin();
 	sm3_base_do_update(desc, data, len, sm3_ce_transform);
@@ -38,8 +40,10 @@ static int sm3_ce_update(struct shash_desc *desc, const u8 *data,
 
 static int sm3_ce_final(struct shash_desc *desc, u8 *out)
 {
-	if (!crypto_simd_usable())
-		return crypto_sm3_finup(desc, NULL, 0, out);
+	if (!crypto_simd_usable()) {
+		sm3_final(shash_desc_ctx(desc), out);
+		return 0;
+	}
 
 	kernel_neon_begin();
 	sm3_base_do_finalize(desc, sm3_ce_transform);
@@ -51,14 +55,22 @@ static int sm3_ce_final(struct shash_desc *desc, u8 *out)
 static int sm3_ce_finup(struct shash_desc *desc, const u8 *data,
 			unsigned int len, u8 *out)
 {
-	if (!crypto_simd_usable())
-		return crypto_sm3_finup(desc, data, len, out);
+	if (!crypto_simd_usable()) {
+		struct sm3_state *sctx = shash_desc_ctx(desc);
+
+		if (len)
+			sm3_update(sctx, data, len);
+		sm3_final(sctx, out);
+		return 0;
+	}
 
 	kernel_neon_begin();
-	sm3_base_do_update(desc, data, len, sm3_ce_transform);
+	if (len)
+		sm3_base_do_update(desc, data, len, sm3_ce_transform);
+	sm3_base_do_finalize(desc, sm3_ce_transform);
 	kernel_neon_end();
 
-	return sm3_ce_final(desc, out);
+	return sm3_base_finish(desc, out);
 }
 
 static struct shash_alg sm3_alg = {
diff --git a/arch/arm64/include/asm/apple_m1_pmu.h b/arch/arm64/include/asm/apple_m1_pmu.h
new file mode 100644
index 000000000000..99483b19b99f
--- /dev/null
+++ b/arch/arm64/include/asm/apple_m1_pmu.h
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#ifndef __ASM_APPLE_M1_PMU_h
+#define __ASM_APPLE_M1_PMU_h
+
+#include <linux/bits.h>
+#include <asm/sysreg.h>
+
+/* Counters */
+#define SYS_IMP_APL_PMC0_EL1	sys_reg(3, 2, 15, 0, 0)
+#define SYS_IMP_APL_PMC1_EL1	sys_reg(3, 2, 15, 1, 0)
+#define SYS_IMP_APL_PMC2_EL1	sys_reg(3, 2, 15, 2, 0)
+#define SYS_IMP_APL_PMC3_EL1	sys_reg(3, 2, 15, 3, 0)
+#define SYS_IMP_APL_PMC4_EL1	sys_reg(3, 2, 15, 4, 0)
+#define SYS_IMP_APL_PMC5_EL1	sys_reg(3, 2, 15, 5, 0)
+#define SYS_IMP_APL_PMC6_EL1	sys_reg(3, 2, 15, 6, 0)
+#define SYS_IMP_APL_PMC7_EL1	sys_reg(3, 2, 15, 7, 0)
+#define SYS_IMP_APL_PMC8_EL1	sys_reg(3, 2, 15, 9, 0)
+#define SYS_IMP_APL_PMC9_EL1	sys_reg(3, 2, 15, 10, 0)
+
+/* Core PMC control register */
+#define SYS_IMP_APL_PMCR0_EL1	sys_reg(3, 1, 15, 0, 0)
+#define PMCR0_CNT_ENABLE_0_7	GENMASK(7, 0)
+#define PMCR0_IMODE		GENMASK(10, 8)
+#define PMCR0_IMODE_OFF		0
+#define PMCR0_IMODE_PMI		1
+#define PMCR0_IMODE_AIC		2
+#define PMCR0_IMODE_HALT	3
+#define PMCR0_IMODE_FIQ		4
+#define PMCR0_IACT		BIT(11)
+#define PMCR0_PMI_ENABLE_0_7	GENMASK(19, 12)
+#define PMCR0_STOP_CNT_ON_PMI	BIT(20)
+#define PMCR0_CNT_GLOB_L2C_EVT	BIT(21)
+#define PMCR0_DEFER_PMI_TO_ERET	BIT(22)
+#define PMCR0_ALLOW_CNT_EN_EL0	BIT(30)
+#define PMCR0_CNT_ENABLE_8_9	GENMASK(33, 32)
+#define PMCR0_PMI_ENABLE_8_9	GENMASK(45, 44)
+
+#define SYS_IMP_APL_PMCR1_EL1	sys_reg(3, 1, 15, 1, 0)
+#define PMCR1_COUNT_A64_EL0_0_7	GENMASK(15, 8)
+#define PMCR1_COUNT_A64_EL1_0_7	GENMASK(23, 16)
+#define PMCR1_COUNT_A64_EL0_8_9	GENMASK(41, 40)
+#define PMCR1_COUNT_A64_EL1_8_9	GENMASK(49, 48)
+
+#define SYS_IMP_APL_PMCR2_EL1	sys_reg(3, 1, 15, 2, 0)
+#define SYS_IMP_APL_PMCR3_EL1	sys_reg(3, 1, 15, 3, 0)
+#define SYS_IMP_APL_PMCR4_EL1	sys_reg(3, 1, 15, 4, 0)
+
+#define SYS_IMP_APL_PMESR0_EL1	sys_reg(3, 1, 15, 5, 0)
+#define PMESR0_EVT_CNT_2	GENMASK(7, 0)
+#define PMESR0_EVT_CNT_3	GENMASK(15, 8)
+#define PMESR0_EVT_CNT_4	GENMASK(23, 16)
+#define PMESR0_EVT_CNT_5	GENMASK(31, 24)
+
+#define SYS_IMP_APL_PMESR1_EL1	sys_reg(3, 1, 15, 6, 0)
+#define PMESR1_EVT_CNT_6	GENMASK(7, 0)
+#define PMESR1_EVT_CNT_7	GENMASK(15, 8)
+#define PMESR1_EVT_CNT_8	GENMASK(23, 16)
+#define PMESR1_EVT_CNT_9	GENMASK(31, 24)
+
+#define SYS_IMP_APL_PMSR_EL1	sys_reg(3, 1, 15, 13, 0)
+#define PMSR_OVERFLOW		GENMASK(9, 0)
+
+#endif /* __ASM_APPLE_M1_PMU_h */
diff --git a/arch/arm64/include/asm/arch_gicv3.h b/arch/arm64/include/asm/arch_gicv3.h
index 4ad22c3135db..8bd5afc7b692 100644
--- a/arch/arm64/include/asm/arch_gicv3.h
+++ b/arch/arm64/include/asm/arch_gicv3.h
@@ -53,17 +53,36 @@ static inline u64 gic_read_iar_common(void)
  * The gicv3 of ThunderX requires a modified version for reading the
  * IAR status to ensure data synchronization (access to icc_iar1_el1
  * is not sync'ed before and after).
+ *
+ * Erratum 38545
+ *
+ * When a IAR register read races with a GIC interrupt RELEASE event,
+ * GIC-CPU interface could wrongly return a valid INTID to the CPU
+ * for an interrupt that is already released(non activated) instead of 0x3ff.
+ *
+ * To workaround this, return a valid interrupt ID only if there is a change
+ * in the active priority list after the IAR read.
+ *
+ * Common function used for both the workarounds since,
+ * 1. On Thunderx 88xx 1.x both erratas are applicable.
+ * 2. Having extra nops doesn't add any side effects for Silicons where
+ *    erratum 23154 is not applicable.
  */
 static inline u64 gic_read_iar_cavium_thunderx(void)
 {
-	u64 irqstat;
+	u64 irqstat, apr;
 
+	apr = read_sysreg_s(SYS_ICC_AP1R0_EL1);
 	nops(8);
 	irqstat = read_sysreg_s(SYS_ICC_IAR1_EL1);
 	nops(4);
 	mb();
 
-	return irqstat;
+	/* Max priority groups implemented is only 32 */
+	if (likely(apr != read_sysreg_s(SYS_ICC_AP1R0_EL1)))
+		return irqstat;
+
+	return 0x3ff;
 }
 
 static inline void gic_write_ctlr(u32 val)
diff --git a/arch/arm64/include/asm/archrandom.h b/arch/arm64/include/asm/archrandom.h
index 09e43272ccb0..d1bb5e71df25 100644
--- a/arch/arm64/include/asm/archrandom.h
+++ b/arch/arm64/include/asm/archrandom.h
@@ -42,13 +42,47 @@ static inline bool __arm64_rndr(unsigned long *v)
 	return ok;
 }
 
+static inline bool __arm64_rndrrs(unsigned long *v)
+{
+	bool ok;
+
+	/*
+	 * Reads of RNDRRS set PSTATE.NZCV to 0b0000 on success,
+	 * and set PSTATE.NZCV to 0b0100 otherwise.
+	 */
+	asm volatile(
+		__mrs_s("%0", SYS_RNDRRS_EL0) "\n"
+	"	cset %w1, ne\n"
+	: "=r" (*v), "=r" (ok)
+	:
+	: "cc");
+
+	return ok;
+}
+
 static inline bool __must_check arch_get_random_long(unsigned long *v)
 {
+	/*
+	 * Only support the generic interface after we have detected
+	 * the system wide capability, avoiding complexity with the
+	 * cpufeature code and with potential scheduling between CPUs
+	 * with and without the feature.
+	 */
+	if (cpus_have_const_cap(ARM64_HAS_RNG) && __arm64_rndr(v))
+		return true;
 	return false;
 }
 
 static inline bool __must_check arch_get_random_int(unsigned int *v)
 {
+	if (cpus_have_const_cap(ARM64_HAS_RNG)) {
+		unsigned long val;
+
+		if (__arm64_rndr(&val)) {
+			*v = val;
+			return true;
+		}
+	}
 	return false;
 }
 
@@ -71,12 +105,11 @@ static inline bool __must_check arch_get_random_seed_long(unsigned long *v)
 	}
 
 	/*
-	 * Only support the generic interface after we have detected
-	 * the system wide capability, avoiding complexity with the
-	 * cpufeature code and with potential scheduling between CPUs
-	 * with and without the feature.
+	 * RNDRRS is not backed by an entropy source but by a DRBG that is
+	 * reseeded after each invocation. This is not a 100% fit but good
+	 * enough to implement this API if no other entropy source exists.
 	 */
-	if (cpus_have_const_cap(ARM64_HAS_RNG) && __arm64_rndr(v))
+	if (cpus_have_const_cap(ARM64_HAS_RNG) && __arm64_rndrrs(v))
 		return true;
 
 	return false;
@@ -96,7 +129,7 @@ static inline bool __must_check arch_get_random_seed_int(unsigned int *v)
 	}
 
 	if (cpus_have_const_cap(ARM64_HAS_RNG)) {
-		if (__arm64_rndr(&val)) {
+		if (__arm64_rndrrs(&val)) {
 			*v = val;
 			return true;
 		}
diff --git a/arch/arm64/include/asm/asm_pointer_auth.h b/arch/arm64/include/asm/asm_pointer_auth.h
index f1bba5fc61c4..ead62f7dd269 100644
--- a/arch/arm64/include/asm/asm_pointer_auth.h
+++ b/arch/arm64/include/asm/asm_pointer_auth.h
@@ -60,6 +60,9 @@ alternative_else_nop_endif
 	.macro __ptrauth_keys_init_cpu tsk, tmp1, tmp2, tmp3
 	mrs	\tmp1, id_aa64isar1_el1
 	ubfx	\tmp1, \tmp1, #ID_AA64ISAR1_APA_SHIFT, #8
+	mrs_s	\tmp2, SYS_ID_AA64ISAR2_EL1
+	ubfx	\tmp2, \tmp2, #ID_AA64ISAR2_APA3_SHIFT, #4
+	orr	\tmp1, \tmp1, \tmp2
 	cbz	\tmp1, .Lno_addr_auth\@
 	mov_q	\tmp1, (SCTLR_ELx_ENIA | SCTLR_ELx_ENIB | \
 			SCTLR_ELx_ENDA | SCTLR_ELx_ENDB)
diff --git a/arch/arm64/include/asm/assembler.h b/arch/arm64/include/asm/assembler.h
index e8bd0af0141c..8c5a61aeaf8e 100644
--- a/arch/arm64/include/asm/assembler.h
+++ b/arch/arm64/include/asm/assembler.h
@@ -109,6 +109,13 @@
 	.endm
 
 /*
+ * Clear Branch History instruction
+ */
+	.macro clearbhb
+	hint	#22
+	.endm
+
+/*
  * Speculation barrier
  */
 	.macro	sb
@@ -535,11 +542,6 @@ alternative_endif
 #define EXPORT_SYMBOL_NOKASAN(name)	EXPORT_SYMBOL(name)
 #endif
 
-#ifdef CONFIG_KASAN_HW_TAGS
-#define EXPORT_SYMBOL_NOHWKASAN(name)
-#else
-#define EXPORT_SYMBOL_NOHWKASAN(name)	EXPORT_SYMBOL_NOKASAN(name)
-#endif
 	/*
 	 * Emit a 64-bit absolute little endian symbol reference in a way that
 	 * ensures that it will be resolved at build time, even when building a
@@ -850,4 +852,50 @@ alternative_endif
 
 #endif /* GNU_PROPERTY_AARCH64_FEATURE_1_DEFAULT */
 
+	.macro __mitigate_spectre_bhb_loop      tmp
+#ifdef CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY
+alternative_cb  spectre_bhb_patch_loop_iter
+	mov	\tmp, #32		// Patched to correct the immediate
+alternative_cb_end
+.Lspectre_bhb_loop\@:
+	b	. + 4
+	subs	\tmp, \tmp, #1
+	b.ne	.Lspectre_bhb_loop\@
+	sb
+#endif /* CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY */
+	.endm
+
+	.macro mitigate_spectre_bhb_loop	tmp
+#ifdef CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY
+alternative_cb	spectre_bhb_patch_loop_mitigation_enable
+	b	.L_spectre_bhb_loop_done\@	// Patched to NOP
+alternative_cb_end
+	__mitigate_spectre_bhb_loop	\tmp
+.L_spectre_bhb_loop_done\@:
+#endif /* CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY */
+	.endm
+
+	/* Save/restores x0-x3 to the stack */
+	.macro __mitigate_spectre_bhb_fw
+#ifdef CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY
+	stp	x0, x1, [sp, #-16]!
+	stp	x2, x3, [sp, #-16]!
+	mov	w0, #ARM_SMCCC_ARCH_WORKAROUND_3
+alternative_cb	smccc_patch_fw_mitigation_conduit
+	nop					// Patched to SMC/HVC #0
+alternative_cb_end
+	ldp	x2, x3, [sp], #16
+	ldp	x0, x1, [sp], #16
+#endif /* CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY */
+	.endm
+
+	.macro mitigate_spectre_bhb_clear_insn
+#ifdef CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY
+alternative_cb	spectre_bhb_patch_clearbhb
+	/* Patched to NOP when not supported */
+	clearbhb
+	isb
+alternative_cb_end
+#endif /* CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY */
+	.endm
 #endif	/* __ASM_ASSEMBLER_H */
diff --git a/arch/arm64/include/asm/cpufeature.h b/arch/arm64/include/asm/cpufeature.h
index ef6be92b1921..c62e7e5e2f0c 100644
--- a/arch/arm64/include/asm/cpufeature.h
+++ b/arch/arm64/include/asm/cpufeature.h
@@ -356,6 +356,7 @@ struct arm64_cpu_capabilities {
 		struct {	/* Feature register checking */
 			u32 sys_reg;
 			u8 field_pos;
+			u8 field_width;
 			u8 min_field_value;
 			u8 hwcap_type;
 			bool sign;
@@ -576,6 +577,8 @@ static inline u64 arm64_ftr_reg_user_value(const struct arm64_ftr_reg *reg)
 static inline int __attribute_const__
 cpuid_feature_extract_field_width(u64 features, int field, int width, bool sign)
 {
+	if (WARN_ON_ONCE(!width))
+		width = 4;
 	return (sign) ?
 		cpuid_feature_extract_signed_field_width(features, field, width) :
 		cpuid_feature_extract_unsigned_field_width(features, field, width);
@@ -637,6 +640,35 @@ static inline bool cpu_supports_mixed_endian_el0(void)
 	return id_aa64mmfr0_mixed_endian_el0(read_cpuid(ID_AA64MMFR0_EL1));
 }
 
+
+static inline bool supports_csv2p3(int scope)
+{
+	u64 pfr0;
+	u8 csv2_val;
+
+	if (scope == SCOPE_LOCAL_CPU)
+		pfr0 = read_sysreg_s(SYS_ID_AA64PFR0_EL1);
+	else
+		pfr0 = read_sanitised_ftr_reg(SYS_ID_AA64PFR0_EL1);
+
+	csv2_val = cpuid_feature_extract_unsigned_field(pfr0,
+							ID_AA64PFR0_CSV2_SHIFT);
+	return csv2_val == 3;
+}
+
+static inline bool supports_clearbhb(int scope)
+{
+	u64 isar2;
+
+	if (scope == SCOPE_LOCAL_CPU)
+		isar2 = read_sysreg_s(SYS_ID_AA64ISAR2_EL1);
+	else
+		isar2 = read_sanitised_ftr_reg(SYS_ID_AA64ISAR2_EL1);
+
+	return cpuid_feature_extract_unsigned_field(isar2,
+						    ID_AA64ISAR2_CLEARBHB_SHIFT);
+}
+
 const struct cpumask *system_32bit_el0_cpumask(void);
 DECLARE_STATIC_KEY_FALSE(arm64_mismatched_32bit_el0);
 
@@ -854,6 +886,7 @@ static inline unsigned int get_vmid_bits(u64 mmfr1)
 extern struct arm64_ftr_override id_aa64mmfr1_override;
 extern struct arm64_ftr_override id_aa64pfr1_override;
 extern struct arm64_ftr_override id_aa64isar1_override;
+extern struct arm64_ftr_override id_aa64isar2_override;
 
 u32 get_kvm_ipa_limit(void);
 void dump_cpu_features(void);
diff --git a/arch/arm64/include/asm/cputype.h b/arch/arm64/include/asm/cputype.h
index 999b9149f856..232b439cbaf3 100644
--- a/arch/arm64/include/asm/cputype.h
+++ b/arch/arm64/include/asm/cputype.h
@@ -73,10 +73,14 @@
 #define ARM_CPU_PART_CORTEX_A76		0xD0B
 #define ARM_CPU_PART_NEOVERSE_N1	0xD0C
 #define ARM_CPU_PART_CORTEX_A77		0xD0D
+#define ARM_CPU_PART_NEOVERSE_V1	0xD40
+#define ARM_CPU_PART_CORTEX_A78		0xD41
+#define ARM_CPU_PART_CORTEX_X1		0xD44
 #define ARM_CPU_PART_CORTEX_A510	0xD46
 #define ARM_CPU_PART_CORTEX_A710	0xD47
 #define ARM_CPU_PART_CORTEX_X2		0xD48
 #define ARM_CPU_PART_NEOVERSE_N2	0xD49
+#define ARM_CPU_PART_CORTEX_A78C	0xD4B
 
 #define APM_CPU_PART_POTENZA		0x000
 
@@ -84,6 +88,13 @@
 #define CAVIUM_CPU_PART_THUNDERX_81XX	0x0A2
 #define CAVIUM_CPU_PART_THUNDERX_83XX	0x0A3
 #define CAVIUM_CPU_PART_THUNDERX2	0x0AF
+/* OcteonTx2 series */
+#define CAVIUM_CPU_PART_OCTX2_98XX	0x0B1
+#define CAVIUM_CPU_PART_OCTX2_96XX	0x0B2
+#define CAVIUM_CPU_PART_OCTX2_95XX	0x0B3
+#define CAVIUM_CPU_PART_OCTX2_95XXN	0x0B4
+#define CAVIUM_CPU_PART_OCTX2_95XXMM	0x0B5
+#define CAVIUM_CPU_PART_OCTX2_95XXO	0x0B6
 
 #define BRCM_CPU_PART_BRAHMA_B53	0x100
 #define BRCM_CPU_PART_VULCAN		0x516
@@ -117,13 +128,23 @@
 #define MIDR_CORTEX_A76	MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A76)
 #define MIDR_NEOVERSE_N1 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_NEOVERSE_N1)
 #define MIDR_CORTEX_A77	MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A77)
+#define MIDR_NEOVERSE_V1	MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_NEOVERSE_V1)
+#define MIDR_CORTEX_A78	MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A78)
+#define MIDR_CORTEX_X1	MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_X1)
 #define MIDR_CORTEX_A510 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A510)
 #define MIDR_CORTEX_A710 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A710)
 #define MIDR_CORTEX_X2 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_X2)
 #define MIDR_NEOVERSE_N2 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_NEOVERSE_N2)
+#define MIDR_CORTEX_A78C	MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A78C)
 #define MIDR_THUNDERX	MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX)
 #define MIDR_THUNDERX_81XX MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX_81XX)
 #define MIDR_THUNDERX_83XX MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX_83XX)
+#define MIDR_OCTX2_98XX MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_OCTX2_98XX)
+#define MIDR_OCTX2_96XX MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_OCTX2_96XX)
+#define MIDR_OCTX2_95XX MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_OCTX2_95XX)
+#define MIDR_OCTX2_95XXN MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_OCTX2_95XXN)
+#define MIDR_OCTX2_95XXMM MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_OCTX2_95XXMM)
+#define MIDR_OCTX2_95XXO MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_OCTX2_95XXO)
 #define MIDR_CAVIUM_THUNDERX2 MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX2)
 #define MIDR_BRAHMA_B53 MIDR_CPU_MODEL(ARM_CPU_IMP_BRCM, BRCM_CPU_PART_BRAHMA_B53)
 #define MIDR_BRCM_VULCAN MIDR_CPU_MODEL(ARM_CPU_IMP_BRCM, BRCM_CPU_PART_VULCAN)
diff --git a/arch/arm64/include/asm/debug-monitors.h b/arch/arm64/include/asm/debug-monitors.h
index 657c921fd784..00c291067e57 100644
--- a/arch/arm64/include/asm/debug-monitors.h
+++ b/arch/arm64/include/asm/debug-monitors.h
@@ -34,18 +34,6 @@
  */
 #define BREAK_INSTR_SIZE		AARCH64_INSN_SIZE
 
-/*
- * BRK instruction encoding
- * The #imm16 value should be placed at bits[20:5] within BRK ins
- */
-#define AARCH64_BREAK_MON	0xd4200000
-
-/*
- * BRK instruction for provoking a fault on purpose
- * Unlike kgdb, #imm16 value with unallocated handler is used for faulting.
- */
-#define AARCH64_BREAK_FAULT	(AARCH64_BREAK_MON | (FAULT_BRK_IMM << 5))
-
 #define AARCH64_BREAK_KGDB_DYN_DBG	\
 	(AARCH64_BREAK_MON | (KGDB_DYN_DBG_BRK_IMM << 5))
 
diff --git a/arch/arm64/include/asm/el2_setup.h b/arch/arm64/include/asm/el2_setup.h
index 3198acb2aad8..7f3c87f7a0ce 100644
--- a/arch/arm64/include/asm/el2_setup.h
+++ b/arch/arm64/include/asm/el2_setup.h
@@ -106,7 +106,7 @@
 	msr_s	SYS_ICC_SRE_EL2, x0
 	isb					// Make sure SRE is now set
 	mrs_s	x0, SYS_ICC_SRE_EL2		// Read SRE back,
-	tbz	x0, #0, 1f			// and check that it sticks
+	tbz	x0, #0, .Lskip_gicv3_\@		// and check that it sticks
 	msr_s	SYS_ICH_HCR_EL2, xzr		// Reset ICC_HCR_EL2 to defaults
 .Lskip_gicv3_\@:
 .endm
diff --git a/arch/arm64/include/asm/fixmap.h b/arch/arm64/include/asm/fixmap.h
index 4335800201c9..daff882883f9 100644
--- a/arch/arm64/include/asm/fixmap.h
+++ b/arch/arm64/include/asm/fixmap.h
@@ -62,9 +62,11 @@ enum fixed_addresses {
 #endif /* CONFIG_ACPI_APEI_GHES */
 
 #ifdef CONFIG_UNMAP_KERNEL_AT_EL0
+	FIX_ENTRY_TRAMP_TEXT3,
+	FIX_ENTRY_TRAMP_TEXT2,
+	FIX_ENTRY_TRAMP_TEXT1,
 	FIX_ENTRY_TRAMP_DATA,
-	FIX_ENTRY_TRAMP_TEXT,
-#define TRAMP_VALIAS		(__fix_to_virt(FIX_ENTRY_TRAMP_TEXT))
+#define TRAMP_VALIAS		(__fix_to_virt(FIX_ENTRY_TRAMP_TEXT1))
 #endif /* CONFIG_UNMAP_KERNEL_AT_EL0 */
 	__end_of_permanent_fixed_addresses,
 
diff --git a/arch/arm64/include/asm/hwcap.h b/arch/arm64/include/asm/hwcap.h
index f68fbb207473..8db5ec0089db 100644
--- a/arch/arm64/include/asm/hwcap.h
+++ b/arch/arm64/include/asm/hwcap.h
@@ -108,6 +108,7 @@
 #define KERNEL_HWCAP_ECV		__khwcap2_feature(ECV)
 #define KERNEL_HWCAP_AFP		__khwcap2_feature(AFP)
 #define KERNEL_HWCAP_RPRES		__khwcap2_feature(RPRES)
+#define KERNEL_HWCAP_MTE3		__khwcap2_feature(MTE3)
 
 /*
  * This yields a mask that user programs can use to figure out what
diff --git a/arch/arm64/include/asm/insn-def.h b/arch/arm64/include/asm/insn-def.h
index 2c075f615c6a..1a7d0d483698 100644
--- a/arch/arm64/include/asm/insn-def.h
+++ b/arch/arm64/include/asm/insn-def.h
@@ -3,7 +3,21 @@
 #ifndef __ASM_INSN_DEF_H
 #define __ASM_INSN_DEF_H
 
+#include <asm/brk-imm.h>
+
 /* A64 instructions are always 32 bits. */
 #define	AARCH64_INSN_SIZE		4
 
+/*
+ * BRK instruction encoding
+ * The #imm16 value should be placed at bits[20:5] within BRK ins
+ */
+#define AARCH64_BREAK_MON	0xd4200000
+
+/*
+ * BRK instruction for provoking a fault on purpose
+ * Unlike kgdb, #imm16 value with unallocated handler is used for faulting.
+ */
+#define AARCH64_BREAK_FAULT	(AARCH64_BREAK_MON | (FAULT_BRK_IMM << 5))
+
 #endif /* __ASM_INSN_DEF_H */
diff --git a/arch/arm64/include/asm/insn.h b/arch/arm64/include/asm/insn.h
index 6b776c8667b2..1e5760d567ae 100644
--- a/arch/arm64/include/asm/insn.h
+++ b/arch/arm64/include/asm/insn.h
@@ -65,6 +65,7 @@ enum aarch64_insn_hint_cr_op {
 	AARCH64_INSN_HINT_PSB  = 0x11 << 5,
 	AARCH64_INSN_HINT_TSB  = 0x12 << 5,
 	AARCH64_INSN_HINT_CSDB = 0x14 << 5,
+	AARCH64_INSN_HINT_CLEARBHB = 0x16 << 5,
 
 	AARCH64_INSN_HINT_BTI   = 0x20 << 5,
 	AARCH64_INSN_HINT_BTIC  = 0x22 << 5,
@@ -205,7 +206,9 @@ enum aarch64_insn_ldst_type {
 	AARCH64_INSN_LDST_LOAD_PAIR_POST_INDEX,
 	AARCH64_INSN_LDST_STORE_PAIR_POST_INDEX,
 	AARCH64_INSN_LDST_LOAD_EX,
+	AARCH64_INSN_LDST_LOAD_ACQ_EX,
 	AARCH64_INSN_LDST_STORE_EX,
+	AARCH64_INSN_LDST_STORE_REL_EX,
 };
 
 enum aarch64_insn_adsb_type {
@@ -280,6 +283,36 @@ enum aarch64_insn_adr_type {
 	AARCH64_INSN_ADR_TYPE_ADR,
 };
 
+enum aarch64_insn_mem_atomic_op {
+	AARCH64_INSN_MEM_ATOMIC_ADD,
+	AARCH64_INSN_MEM_ATOMIC_CLR,
+	AARCH64_INSN_MEM_ATOMIC_EOR,
+	AARCH64_INSN_MEM_ATOMIC_SET,
+	AARCH64_INSN_MEM_ATOMIC_SWP,
+};
+
+enum aarch64_insn_mem_order_type {
+	AARCH64_INSN_MEM_ORDER_NONE,
+	AARCH64_INSN_MEM_ORDER_ACQ,
+	AARCH64_INSN_MEM_ORDER_REL,
+	AARCH64_INSN_MEM_ORDER_ACQREL,
+};
+
+enum aarch64_insn_mb_type {
+	AARCH64_INSN_MB_SY,
+	AARCH64_INSN_MB_ST,
+	AARCH64_INSN_MB_LD,
+	AARCH64_INSN_MB_ISH,
+	AARCH64_INSN_MB_ISHST,
+	AARCH64_INSN_MB_ISHLD,
+	AARCH64_INSN_MB_NSH,
+	AARCH64_INSN_MB_NSHST,
+	AARCH64_INSN_MB_NSHLD,
+	AARCH64_INSN_MB_OSH,
+	AARCH64_INSN_MB_OSHST,
+	AARCH64_INSN_MB_OSHLD,
+};
+
 #define	__AARCH64_INSN_FUNCS(abbr, mask, val)				\
 static __always_inline bool aarch64_insn_is_##abbr(u32 code)		\
 {									\
@@ -303,6 +336,11 @@ __AARCH64_INSN_FUNCS(store_post,	0x3FE00C00, 0x38000400)
 __AARCH64_INSN_FUNCS(load_post,	0x3FE00C00, 0x38400400)
 __AARCH64_INSN_FUNCS(str_reg,	0x3FE0EC00, 0x38206800)
 __AARCH64_INSN_FUNCS(ldadd,	0x3F20FC00, 0x38200000)
+__AARCH64_INSN_FUNCS(ldclr,	0x3F20FC00, 0x38201000)
+__AARCH64_INSN_FUNCS(ldeor,	0x3F20FC00, 0x38202000)
+__AARCH64_INSN_FUNCS(ldset,	0x3F20FC00, 0x38203000)
+__AARCH64_INSN_FUNCS(swp,	0x3F20FC00, 0x38208000)
+__AARCH64_INSN_FUNCS(cas,	0x3FA07C00, 0x08A07C00)
 __AARCH64_INSN_FUNCS(ldr_reg,	0x3FE0EC00, 0x38606800)
 __AARCH64_INSN_FUNCS(ldr_lit,	0xBF000000, 0x18000000)
 __AARCH64_INSN_FUNCS(ldrsw_lit,	0xFF000000, 0x98000000)
@@ -474,13 +512,6 @@ u32 aarch64_insn_gen_load_store_ex(enum aarch64_insn_register reg,
 				   enum aarch64_insn_register state,
 				   enum aarch64_insn_size_type size,
 				   enum aarch64_insn_ldst_type type);
-u32 aarch64_insn_gen_ldadd(enum aarch64_insn_register result,
-			   enum aarch64_insn_register address,
-			   enum aarch64_insn_register value,
-			   enum aarch64_insn_size_type size);
-u32 aarch64_insn_gen_stadd(enum aarch64_insn_register address,
-			   enum aarch64_insn_register value,
-			   enum aarch64_insn_size_type size);
 u32 aarch64_insn_gen_add_sub_imm(enum aarch64_insn_register dst,
 				 enum aarch64_insn_register src,
 				 int imm, enum aarch64_insn_variant variant,
@@ -541,6 +572,42 @@ u32 aarch64_insn_gen_prefetch(enum aarch64_insn_register base,
 			      enum aarch64_insn_prfm_type type,
 			      enum aarch64_insn_prfm_target target,
 			      enum aarch64_insn_prfm_policy policy);
+#ifdef CONFIG_ARM64_LSE_ATOMICS
+u32 aarch64_insn_gen_atomic_ld_op(enum aarch64_insn_register result,
+				  enum aarch64_insn_register address,
+				  enum aarch64_insn_register value,
+				  enum aarch64_insn_size_type size,
+				  enum aarch64_insn_mem_atomic_op op,
+				  enum aarch64_insn_mem_order_type order);
+u32 aarch64_insn_gen_cas(enum aarch64_insn_register result,
+			 enum aarch64_insn_register address,
+			 enum aarch64_insn_register value,
+			 enum aarch64_insn_size_type size,
+			 enum aarch64_insn_mem_order_type order);
+#else
+static inline
+u32 aarch64_insn_gen_atomic_ld_op(enum aarch64_insn_register result,
+				  enum aarch64_insn_register address,
+				  enum aarch64_insn_register value,
+				  enum aarch64_insn_size_type size,
+				  enum aarch64_insn_mem_atomic_op op,
+				  enum aarch64_insn_mem_order_type order)
+{
+	return AARCH64_BREAK_FAULT;
+}
+
+static inline
+u32 aarch64_insn_gen_cas(enum aarch64_insn_register result,
+			 enum aarch64_insn_register address,
+			 enum aarch64_insn_register value,
+			 enum aarch64_insn_size_type size,
+			 enum aarch64_insn_mem_order_type order)
+{
+	return AARCH64_BREAK_FAULT;
+}
+#endif
+u32 aarch64_insn_gen_dmb(enum aarch64_insn_mb_type type);
+
 s32 aarch64_get_branch_offset(u32 insn);
 u32 aarch64_set_branch_offset(u32 insn, s32 offset);
 
diff --git a/arch/arm64/include/asm/kvm_arm.h b/arch/arm64/include/asm/kvm_arm.h
index 01d47c5886dc..1767ded83888 100644
--- a/arch/arm64/include/asm/kvm_arm.h
+++ b/arch/arm64/include/asm/kvm_arm.h
@@ -355,8 +355,8 @@
 	ECN(SOFTSTP_CUR), ECN(WATCHPT_LOW), ECN(WATCHPT_CUR), \
 	ECN(BKPT32), ECN(VECTOR32), ECN(BRK64)
 
-#define CPACR_EL1_FPEN		(3 << 20)
 #define CPACR_EL1_TTA		(1 << 28)
-#define CPACR_EL1_DEFAULT	(CPACR_EL1_FPEN | CPACR_EL1_ZEN_EL1EN)
+#define CPACR_EL1_DEFAULT	(CPACR_EL1_FPEN_EL0EN | CPACR_EL1_FPEN_EL1EN |\
+				 CPACR_EL1_ZEN_EL1EN)
 
 #endif /* __ARM64_KVM_ARM_H__ */
diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
index 5bc01e62c08a..031e3a2537fc 100644
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -714,6 +714,11 @@ static inline void kvm_init_host_cpu_context(struct kvm_cpu_context *cpu_ctxt)
 	ctxt_sys_reg(cpu_ctxt, MPIDR_EL1) = read_cpuid_mpidr();
 }
 
+static inline bool kvm_system_needs_idmapped_vectors(void)
+{
+	return cpus_have_const_cap(ARM64_SPECTRE_V3A);
+}
+
 void kvm_arm_vcpu_ptrauth_trap(struct kvm_vcpu *vcpu);
 
 static inline void kvm_arch_hardware_unsetup(void) {}
diff --git a/arch/arm64/include/asm/kvm_hyp.h b/arch/arm64/include/asm/kvm_hyp.h
index 462882f356c7..aa7fa2a08f06 100644
--- a/arch/arm64/include/asm/kvm_hyp.h
+++ b/arch/arm64/include/asm/kvm_hyp.h
@@ -118,6 +118,7 @@ extern u64 kvm_nvhe_sym(id_aa64pfr0_el1_sys_val);
 extern u64 kvm_nvhe_sym(id_aa64pfr1_el1_sys_val);
 extern u64 kvm_nvhe_sym(id_aa64isar0_el1_sys_val);
 extern u64 kvm_nvhe_sym(id_aa64isar1_el1_sys_val);
+extern u64 kvm_nvhe_sym(id_aa64isar2_el1_sys_val);
 extern u64 kvm_nvhe_sym(id_aa64mmfr0_el1_sys_val);
 extern u64 kvm_nvhe_sym(id_aa64mmfr1_el1_sys_val);
 extern u64 kvm_nvhe_sym(id_aa64mmfr2_el1_sys_val);
diff --git a/arch/arm64/include/asm/linkage.h b/arch/arm64/include/asm/linkage.h
index b77e9b3f5371..43f8c25b3fda 100644
--- a/arch/arm64/include/asm/linkage.h
+++ b/arch/arm64/include/asm/linkage.h
@@ -39,28 +39,4 @@
 	SYM_START(name, SYM_L_WEAK, SYM_A_NONE)		\
 	bti c ;
 
-/*
- * Annotate a function as position independent, i.e., safe to be called before
- * the kernel virtual mapping is activated.
- */
-#define SYM_FUNC_START_PI(x)			\
-		SYM_FUNC_START_ALIAS(__pi_##x);	\
-		SYM_FUNC_START(x)
-
-#define SYM_FUNC_START_WEAK_PI(x)		\
-		SYM_FUNC_START_ALIAS(__pi_##x);	\
-		SYM_FUNC_START_WEAK(x)
-
-#define SYM_FUNC_START_WEAK_ALIAS_PI(x)		\
-		SYM_FUNC_START_ALIAS(__pi_##x);	\
-		SYM_START(x, SYM_L_WEAK, SYM_A_ALIGN)
-
-#define SYM_FUNC_END_PI(x)			\
-		SYM_FUNC_END(x);		\
-		SYM_FUNC_END_ALIAS(__pi_##x)
-
-#define SYM_FUNC_END_ALIAS_PI(x)		\
-		SYM_FUNC_END_ALIAS(x);		\
-		SYM_FUNC_END_ALIAS(__pi_##x)
-
 #endif
diff --git a/arch/arm64/include/asm/lse.h b/arch/arm64/include/asm/lse.h
index 5d10051c3e62..29c85810ae69 100644
--- a/arch/arm64/include/asm/lse.h
+++ b/arch/arm64/include/asm/lse.h
@@ -17,12 +17,10 @@
 #include <asm/cpucaps.h>
 
 extern struct static_key_false cpu_hwcap_keys[ARM64_NCAPS];
-extern struct static_key_false arm64_const_caps_ready;
 
-static inline bool system_uses_lse_atomics(void)
+static __always_inline bool system_uses_lse_atomics(void)
 {
-	return (static_branch_likely(&arm64_const_caps_ready)) &&
-		static_branch_likely(&cpu_hwcap_keys[ARM64_HAS_LSE_ATOMICS]);
+	return static_branch_likely(&cpu_hwcap_keys[ARM64_HAS_LSE_ATOMICS]);
 }
 
 #define __lse_ll_sc_body(op, ...)					\
diff --git a/arch/arm64/include/asm/module.lds.h b/arch/arm64/include/asm/module.lds.h
index a11ccadd47d2..094701ec5500 100644
--- a/arch/arm64/include/asm/module.lds.h
+++ b/arch/arm64/include/asm/module.lds.h
@@ -1,8 +1,8 @@
 SECTIONS {
 #ifdef CONFIG_ARM64_MODULE_PLTS
-	.plt 0 (NOLOAD) : { BYTE(0) }
-	.init.plt 0 (NOLOAD) : { BYTE(0) }
-	.text.ftrace_trampoline 0 (NOLOAD) : { BYTE(0) }
+	.plt 0 : { BYTE(0) }
+	.init.plt 0 : { BYTE(0) }
+	.text.ftrace_trampoline 0 : { BYTE(0) }
 #endif
 
 #ifdef CONFIG_KASAN_SW_TAGS
diff --git a/arch/arm64/include/asm/mte-def.h b/arch/arm64/include/asm/mte-def.h
index 626d359b396e..14ee86b019c2 100644
--- a/arch/arm64/include/asm/mte-def.h
+++ b/arch/arm64/include/asm/mte-def.h
@@ -11,6 +11,7 @@
 #define MTE_TAG_SHIFT		56
 #define MTE_TAG_SIZE		4
 #define MTE_TAG_MASK		GENMASK((MTE_TAG_SHIFT + (MTE_TAG_SIZE - 1)), MTE_TAG_SHIFT)
+#define MTE_PAGE_TAG_STORAGE	(MTE_GRANULES_PER_PAGE * MTE_TAG_SIZE / 8)
 
 #define __MTE_PREAMBLE		ARM64_ASM_PREAMBLE ".arch_extension memtag\n"
 
diff --git a/arch/arm64/include/asm/mte-kasan.h b/arch/arm64/include/asm/mte-kasan.h
index e4704a403237..a857bcacf0fe 100644
--- a/arch/arm64/include/asm/mte-kasan.h
+++ b/arch/arm64/include/asm/mte-kasan.h
@@ -5,6 +5,7 @@
 #ifndef __ASM_MTE_KASAN_H
 #define __ASM_MTE_KASAN_H
 
+#include <asm/compiler.h>
 #include <asm/mte-def.h>
 
 #ifndef __ASSEMBLY__
diff --git a/arch/arm64/include/asm/mte.h b/arch/arm64/include/asm/mte.h
index 075539f5f1c8..adcb937342f1 100644
--- a/arch/arm64/include/asm/mte.h
+++ b/arch/arm64/include/asm/mte.h
@@ -11,7 +11,9 @@
 #ifndef __ASSEMBLY__
 
 #include <linux/bitfield.h>
+#include <linux/kasan-enabled.h>
 #include <linux/page-flags.h>
+#include <linux/sched.h>
 #include <linux/types.h>
 
 #include <asm/pgtable-types.h>
@@ -86,6 +88,26 @@ static inline int mte_ptrace_copy_tags(struct task_struct *child,
 
 #endif /* CONFIG_ARM64_MTE */
 
+static inline void mte_disable_tco_entry(struct task_struct *task)
+{
+	if (!system_supports_mte())
+		return;
+
+	/*
+	 * Re-enable tag checking (TCO set on exception entry). This is only
+	 * necessary if MTE is enabled in either the kernel or the userspace
+	 * task in synchronous or asymmetric mode (SCTLR_EL1.TCF0 bit 0 is set
+	 * for both). With MTE disabled in the kernel and disabled or
+	 * asynchronous in userspace, tag check faults (including in uaccesses)
+	 * are not reported, therefore there is no need to re-enable checking.
+	 * This is beneficial on microarchitectures where re-enabling TCO is
+	 * expensive.
+	 */
+	if (kasan_hw_tags_enabled() ||
+	    (task->thread.sctlr_user & (1UL << SCTLR_EL1_TCF0_SHIFT)))
+		asm volatile(SET_PSTATE_TCO(0));
+}
+
 #ifdef CONFIG_KASAN_HW_TAGS
 /* Whether the MTE asynchronous mode is enabled. */
 DECLARE_STATIC_KEY_FALSE(mte_async_or_asymm_mode);
diff --git a/arch/arm64/include/asm/paravirt_api_clock.h b/arch/arm64/include/asm/paravirt_api_clock.h
new file mode 100644
index 000000000000..65ac7cee0dad
--- /dev/null
+++ b/arch/arm64/include/asm/paravirt_api_clock.h
@@ -0,0 +1 @@
+#include <asm/paravirt.h>
diff --git a/arch/arm64/include/asm/perf_event.h b/arch/arm64/include/asm/perf_event.h
index 4ef6f19331f9..3eaf462f5752 100644
--- a/arch/arm64/include/asm/perf_event.h
+++ b/arch/arm64/include/asm/perf_event.h
@@ -15,70 +15,70 @@
 /*
  * Common architectural and microarchitectural event numbers.
  */
-#define ARMV8_PMUV3_PERFCTR_SW_INCR				0x00
-#define ARMV8_PMUV3_PERFCTR_L1I_CACHE_REFILL			0x01
-#define ARMV8_PMUV3_PERFCTR_L1I_TLB_REFILL			0x02
-#define ARMV8_PMUV3_PERFCTR_L1D_CACHE_REFILL			0x03
-#define ARMV8_PMUV3_PERFCTR_L1D_CACHE				0x04
-#define ARMV8_PMUV3_PERFCTR_L1D_TLB_REFILL			0x05
-#define ARMV8_PMUV3_PERFCTR_LD_RETIRED				0x06
-#define ARMV8_PMUV3_PERFCTR_ST_RETIRED				0x07
-#define ARMV8_PMUV3_PERFCTR_INST_RETIRED			0x08
-#define ARMV8_PMUV3_PERFCTR_EXC_TAKEN				0x09
-#define ARMV8_PMUV3_PERFCTR_EXC_RETURN				0x0A
-#define ARMV8_PMUV3_PERFCTR_CID_WRITE_RETIRED			0x0B
-#define ARMV8_PMUV3_PERFCTR_PC_WRITE_RETIRED			0x0C
-#define ARMV8_PMUV3_PERFCTR_BR_IMMED_RETIRED			0x0D
-#define ARMV8_PMUV3_PERFCTR_BR_RETURN_RETIRED			0x0E
-#define ARMV8_PMUV3_PERFCTR_UNALIGNED_LDST_RETIRED		0x0F
-#define ARMV8_PMUV3_PERFCTR_BR_MIS_PRED				0x10
-#define ARMV8_PMUV3_PERFCTR_CPU_CYCLES				0x11
-#define ARMV8_PMUV3_PERFCTR_BR_PRED				0x12
-#define ARMV8_PMUV3_PERFCTR_MEM_ACCESS				0x13
-#define ARMV8_PMUV3_PERFCTR_L1I_CACHE				0x14
-#define ARMV8_PMUV3_PERFCTR_L1D_CACHE_WB			0x15
-#define ARMV8_PMUV3_PERFCTR_L2D_CACHE				0x16
-#define ARMV8_PMUV3_PERFCTR_L2D_CACHE_REFILL			0x17
-#define ARMV8_PMUV3_PERFCTR_L2D_CACHE_WB			0x18
-#define ARMV8_PMUV3_PERFCTR_BUS_ACCESS				0x19
-#define ARMV8_PMUV3_PERFCTR_MEMORY_ERROR			0x1A
-#define ARMV8_PMUV3_PERFCTR_INST_SPEC				0x1B
-#define ARMV8_PMUV3_PERFCTR_TTBR_WRITE_RETIRED			0x1C
-#define ARMV8_PMUV3_PERFCTR_BUS_CYCLES				0x1D
-#define ARMV8_PMUV3_PERFCTR_CHAIN				0x1E
-#define ARMV8_PMUV3_PERFCTR_L1D_CACHE_ALLOCATE			0x1F
-#define ARMV8_PMUV3_PERFCTR_L2D_CACHE_ALLOCATE			0x20
-#define ARMV8_PMUV3_PERFCTR_BR_RETIRED				0x21
-#define ARMV8_PMUV3_PERFCTR_BR_MIS_PRED_RETIRED			0x22
-#define ARMV8_PMUV3_PERFCTR_STALL_FRONTEND			0x23
-#define ARMV8_PMUV3_PERFCTR_STALL_BACKEND			0x24
-#define ARMV8_PMUV3_PERFCTR_L1D_TLB				0x25
-#define ARMV8_PMUV3_PERFCTR_L1I_TLB				0x26
-#define ARMV8_PMUV3_PERFCTR_L2I_CACHE				0x27
-#define ARMV8_PMUV3_PERFCTR_L2I_CACHE_REFILL			0x28
-#define ARMV8_PMUV3_PERFCTR_L3D_CACHE_ALLOCATE			0x29
-#define ARMV8_PMUV3_PERFCTR_L3D_CACHE_REFILL			0x2A
-#define ARMV8_PMUV3_PERFCTR_L3D_CACHE				0x2B
-#define ARMV8_PMUV3_PERFCTR_L3D_CACHE_WB			0x2C
-#define ARMV8_PMUV3_PERFCTR_L2D_TLB_REFILL			0x2D
-#define ARMV8_PMUV3_PERFCTR_L2I_TLB_REFILL			0x2E
-#define ARMV8_PMUV3_PERFCTR_L2D_TLB				0x2F
-#define ARMV8_PMUV3_PERFCTR_L2I_TLB				0x30
-#define ARMV8_PMUV3_PERFCTR_REMOTE_ACCESS			0x31
-#define ARMV8_PMUV3_PERFCTR_LL_CACHE				0x32
-#define ARMV8_PMUV3_PERFCTR_LL_CACHE_MISS			0x33
-#define ARMV8_PMUV3_PERFCTR_DTLB_WALK				0x34
-#define ARMV8_PMUV3_PERFCTR_ITLB_WALK				0x35
-#define ARMV8_PMUV3_PERFCTR_LL_CACHE_RD				0x36
-#define ARMV8_PMUV3_PERFCTR_LL_CACHE_MISS_RD			0x37
-#define ARMV8_PMUV3_PERFCTR_REMOTE_ACCESS_RD			0x38
-#define ARMV8_PMUV3_PERFCTR_L1D_CACHE_LMISS_RD			0x39
-#define ARMV8_PMUV3_PERFCTR_OP_RETIRED				0x3A
-#define ARMV8_PMUV3_PERFCTR_OP_SPEC				0x3B
-#define ARMV8_PMUV3_PERFCTR_STALL				0x3C
-#define ARMV8_PMUV3_PERFCTR_STALL_SLOT_BACKEND			0x3D
-#define ARMV8_PMUV3_PERFCTR_STALL_SLOT_FRONTEND			0x3E
-#define ARMV8_PMUV3_PERFCTR_STALL_SLOT				0x3F
+#define ARMV8_PMUV3_PERFCTR_SW_INCR				0x0000
+#define ARMV8_PMUV3_PERFCTR_L1I_CACHE_REFILL			0x0001
+#define ARMV8_PMUV3_PERFCTR_L1I_TLB_REFILL			0x0002
+#define ARMV8_PMUV3_PERFCTR_L1D_CACHE_REFILL			0x0003
+#define ARMV8_PMUV3_PERFCTR_L1D_CACHE				0x0004
+#define ARMV8_PMUV3_PERFCTR_L1D_TLB_REFILL			0x0005
+#define ARMV8_PMUV3_PERFCTR_LD_RETIRED				0x0006
+#define ARMV8_PMUV3_PERFCTR_ST_RETIRED				0x0007
+#define ARMV8_PMUV3_PERFCTR_INST_RETIRED			0x0008
+#define ARMV8_PMUV3_PERFCTR_EXC_TAKEN				0x0009
+#define ARMV8_PMUV3_PERFCTR_EXC_RETURN				0x000A
+#define ARMV8_PMUV3_PERFCTR_CID_WRITE_RETIRED			0x000B
+#define ARMV8_PMUV3_PERFCTR_PC_WRITE_RETIRED			0x000C
+#define ARMV8_PMUV3_PERFCTR_BR_IMMED_RETIRED			0x000D
+#define ARMV8_PMUV3_PERFCTR_BR_RETURN_RETIRED			0x000E
+#define ARMV8_PMUV3_PERFCTR_UNALIGNED_LDST_RETIRED		0x000F
+#define ARMV8_PMUV3_PERFCTR_BR_MIS_PRED				0x0010
+#define ARMV8_PMUV3_PERFCTR_CPU_CYCLES				0x0011
+#define ARMV8_PMUV3_PERFCTR_BR_PRED				0x0012
+#define ARMV8_PMUV3_PERFCTR_MEM_ACCESS				0x0013
+#define ARMV8_PMUV3_PERFCTR_L1I_CACHE				0x0014
+#define ARMV8_PMUV3_PERFCTR_L1D_CACHE_WB			0x0015
+#define ARMV8_PMUV3_PERFCTR_L2D_CACHE				0x0016
+#define ARMV8_PMUV3_PERFCTR_L2D_CACHE_REFILL			0x0017
+#define ARMV8_PMUV3_PERFCTR_L2D_CACHE_WB			0x0018
+#define ARMV8_PMUV3_PERFCTR_BUS_ACCESS				0x0019
+#define ARMV8_PMUV3_PERFCTR_MEMORY_ERROR			0x001A
+#define ARMV8_PMUV3_PERFCTR_INST_SPEC				0x001B
+#define ARMV8_PMUV3_PERFCTR_TTBR_WRITE_RETIRED			0x001C
+#define ARMV8_PMUV3_PERFCTR_BUS_CYCLES				0x001D
+#define ARMV8_PMUV3_PERFCTR_CHAIN				0x001E
+#define ARMV8_PMUV3_PERFCTR_L1D_CACHE_ALLOCATE			0x001F
+#define ARMV8_PMUV3_PERFCTR_L2D_CACHE_ALLOCATE			0x0020
+#define ARMV8_PMUV3_PERFCTR_BR_RETIRED				0x0021
+#define ARMV8_PMUV3_PERFCTR_BR_MIS_PRED_RETIRED			0x0022
+#define ARMV8_PMUV3_PERFCTR_STALL_FRONTEND			0x0023
+#define ARMV8_PMUV3_PERFCTR_STALL_BACKEND			0x0024
+#define ARMV8_PMUV3_PERFCTR_L1D_TLB				0x0025
+#define ARMV8_PMUV3_PERFCTR_L1I_TLB				0x0026
+#define ARMV8_PMUV3_PERFCTR_L2I_CACHE				0x0027
+#define ARMV8_PMUV3_PERFCTR_L2I_CACHE_REFILL			0x0028
+#define ARMV8_PMUV3_PERFCTR_L3D_CACHE_ALLOCATE			0x0029
+#define ARMV8_PMUV3_PERFCTR_L3D_CACHE_REFILL			0x002A
+#define ARMV8_PMUV3_PERFCTR_L3D_CACHE				0x002B
+#define ARMV8_PMUV3_PERFCTR_L3D_CACHE_WB			0x002C
+#define ARMV8_PMUV3_PERFCTR_L2D_TLB_REFILL			0x002D
+#define ARMV8_PMUV3_PERFCTR_L2I_TLB_REFILL			0x002E
+#define ARMV8_PMUV3_PERFCTR_L2D_TLB				0x002F
+#define ARMV8_PMUV3_PERFCTR_L2I_TLB				0x0030
+#define ARMV8_PMUV3_PERFCTR_REMOTE_ACCESS			0x0031
+#define ARMV8_PMUV3_PERFCTR_LL_CACHE				0x0032
+#define ARMV8_PMUV3_PERFCTR_LL_CACHE_MISS			0x0033
+#define ARMV8_PMUV3_PERFCTR_DTLB_WALK				0x0034
+#define ARMV8_PMUV3_PERFCTR_ITLB_WALK				0x0035
+#define ARMV8_PMUV3_PERFCTR_LL_CACHE_RD				0x0036
+#define ARMV8_PMUV3_PERFCTR_LL_CACHE_MISS_RD			0x0037
+#define ARMV8_PMUV3_PERFCTR_REMOTE_ACCESS_RD			0x0038
+#define ARMV8_PMUV3_PERFCTR_L1D_CACHE_LMISS_RD			0x0039
+#define ARMV8_PMUV3_PERFCTR_OP_RETIRED				0x003A
+#define ARMV8_PMUV3_PERFCTR_OP_SPEC				0x003B
+#define ARMV8_PMUV3_PERFCTR_STALL				0x003C
+#define ARMV8_PMUV3_PERFCTR_STALL_SLOT_BACKEND			0x003D
+#define ARMV8_PMUV3_PERFCTR_STALL_SLOT_FRONTEND			0x003E
+#define ARMV8_PMUV3_PERFCTR_STALL_SLOT				0x003F
 
 /* Statistical profiling extension microarchitectural events */
 #define	ARMV8_SPE_PERFCTR_SAMPLE_POP				0x4000
@@ -96,6 +96,20 @@
 #define	ARMV8_PMUV3_PERFCTR_L2I_CACHE_LMISS			0x400A
 #define	ARMV8_PMUV3_PERFCTR_L3D_CACHE_LMISS_RD			0x400B
 
+/* Trace buffer events */
+#define ARMV8_PMUV3_PERFCTR_TRB_WRAP				0x400C
+#define ARMV8_PMUV3_PERFCTR_TRB_TRIG				0x400E
+
+/* Trace unit events */
+#define ARMV8_PMUV3_PERFCTR_TRCEXTOUT0				0x4010
+#define ARMV8_PMUV3_PERFCTR_TRCEXTOUT1				0x4011
+#define ARMV8_PMUV3_PERFCTR_TRCEXTOUT2				0x4012
+#define ARMV8_PMUV3_PERFCTR_TRCEXTOUT3				0x4013
+#define ARMV8_PMUV3_PERFCTR_CTI_TRIGOUT4			0x4018
+#define ARMV8_PMUV3_PERFCTR_CTI_TRIGOUT5			0x4019
+#define ARMV8_PMUV3_PERFCTR_CTI_TRIGOUT6			0x401A
+#define ARMV8_PMUV3_PERFCTR_CTI_TRIGOUT7			0x401B
+
 /* additional latency from alignment events */
 #define	ARMV8_PMUV3_PERFCTR_LDST_ALIGN_LAT			0x4020
 #define	ARMV8_PMUV3_PERFCTR_LD_ALIGN_LAT			0x4021
@@ -107,91 +121,91 @@
 #define	ARMV8_MTE_PERFCTR_MEM_ACCESS_CHECKED_WR			0x4026
 
 /* ARMv8 recommended implementation defined event types */
-#define ARMV8_IMPDEF_PERFCTR_L1D_CACHE_RD			0x40
-#define ARMV8_IMPDEF_PERFCTR_L1D_CACHE_WR			0x41
-#define ARMV8_IMPDEF_PERFCTR_L1D_CACHE_REFILL_RD		0x42
-#define ARMV8_IMPDEF_PERFCTR_L1D_CACHE_REFILL_WR		0x43
-#define ARMV8_IMPDEF_PERFCTR_L1D_CACHE_REFILL_INNER		0x44
-#define ARMV8_IMPDEF_PERFCTR_L1D_CACHE_REFILL_OUTER		0x45
-#define ARMV8_IMPDEF_PERFCTR_L1D_CACHE_WB_VICTIM		0x46
-#define ARMV8_IMPDEF_PERFCTR_L1D_CACHE_WB_CLEAN			0x47
-#define ARMV8_IMPDEF_PERFCTR_L1D_CACHE_INVAL			0x48
-
-#define ARMV8_IMPDEF_PERFCTR_L1D_TLB_REFILL_RD			0x4C
-#define ARMV8_IMPDEF_PERFCTR_L1D_TLB_REFILL_WR			0x4D
-#define ARMV8_IMPDEF_PERFCTR_L1D_TLB_RD				0x4E
-#define ARMV8_IMPDEF_PERFCTR_L1D_TLB_WR				0x4F
-#define ARMV8_IMPDEF_PERFCTR_L2D_CACHE_RD			0x50
-#define ARMV8_IMPDEF_PERFCTR_L2D_CACHE_WR			0x51
-#define ARMV8_IMPDEF_PERFCTR_L2D_CACHE_REFILL_RD		0x52
-#define ARMV8_IMPDEF_PERFCTR_L2D_CACHE_REFILL_WR		0x53
-
-#define ARMV8_IMPDEF_PERFCTR_L2D_CACHE_WB_VICTIM		0x56
-#define ARMV8_IMPDEF_PERFCTR_L2D_CACHE_WB_CLEAN			0x57
-#define ARMV8_IMPDEF_PERFCTR_L2D_CACHE_INVAL			0x58
-
-#define ARMV8_IMPDEF_PERFCTR_L2D_TLB_REFILL_RD			0x5C
-#define ARMV8_IMPDEF_PERFCTR_L2D_TLB_REFILL_WR			0x5D
-#define ARMV8_IMPDEF_PERFCTR_L2D_TLB_RD				0x5E
-#define ARMV8_IMPDEF_PERFCTR_L2D_TLB_WR				0x5F
-#define ARMV8_IMPDEF_PERFCTR_BUS_ACCESS_RD			0x60
-#define ARMV8_IMPDEF_PERFCTR_BUS_ACCESS_WR			0x61
-#define ARMV8_IMPDEF_PERFCTR_BUS_ACCESS_SHARED			0x62
-#define ARMV8_IMPDEF_PERFCTR_BUS_ACCESS_NOT_SHARED		0x63
-#define ARMV8_IMPDEF_PERFCTR_BUS_ACCESS_NORMAL			0x64
-#define ARMV8_IMPDEF_PERFCTR_BUS_ACCESS_PERIPH			0x65
-#define ARMV8_IMPDEF_PERFCTR_MEM_ACCESS_RD			0x66
-#define ARMV8_IMPDEF_PERFCTR_MEM_ACCESS_WR			0x67
-#define ARMV8_IMPDEF_PERFCTR_UNALIGNED_LD_SPEC			0x68
-#define ARMV8_IMPDEF_PERFCTR_UNALIGNED_ST_SPEC			0x69
-#define ARMV8_IMPDEF_PERFCTR_UNALIGNED_LDST_SPEC		0x6A
-
-#define ARMV8_IMPDEF_PERFCTR_LDREX_SPEC				0x6C
-#define ARMV8_IMPDEF_PERFCTR_STREX_PASS_SPEC			0x6D
-#define ARMV8_IMPDEF_PERFCTR_STREX_FAIL_SPEC			0x6E
-#define ARMV8_IMPDEF_PERFCTR_STREX_SPEC				0x6F
-#define ARMV8_IMPDEF_PERFCTR_LD_SPEC				0x70
-#define ARMV8_IMPDEF_PERFCTR_ST_SPEC				0x71
-#define ARMV8_IMPDEF_PERFCTR_LDST_SPEC				0x72
-#define ARMV8_IMPDEF_PERFCTR_DP_SPEC				0x73
-#define ARMV8_IMPDEF_PERFCTR_ASE_SPEC				0x74
-#define ARMV8_IMPDEF_PERFCTR_VFP_SPEC				0x75
-#define ARMV8_IMPDEF_PERFCTR_PC_WRITE_SPEC			0x76
-#define ARMV8_IMPDEF_PERFCTR_CRYPTO_SPEC			0x77
-#define ARMV8_IMPDEF_PERFCTR_BR_IMMED_SPEC			0x78
-#define ARMV8_IMPDEF_PERFCTR_BR_RETURN_SPEC			0x79
-#define ARMV8_IMPDEF_PERFCTR_BR_INDIRECT_SPEC			0x7A
-
-#define ARMV8_IMPDEF_PERFCTR_ISB_SPEC				0x7C
-#define ARMV8_IMPDEF_PERFCTR_DSB_SPEC				0x7D
-#define ARMV8_IMPDEF_PERFCTR_DMB_SPEC				0x7E
-
-#define ARMV8_IMPDEF_PERFCTR_EXC_UNDEF				0x81
-#define ARMV8_IMPDEF_PERFCTR_EXC_SVC				0x82
-#define ARMV8_IMPDEF_PERFCTR_EXC_PABORT				0x83
-#define ARMV8_IMPDEF_PERFCTR_EXC_DABORT				0x84
-
-#define ARMV8_IMPDEF_PERFCTR_EXC_IRQ				0x86
-#define ARMV8_IMPDEF_PERFCTR_EXC_FIQ				0x87
-#define ARMV8_IMPDEF_PERFCTR_EXC_SMC				0x88
-
-#define ARMV8_IMPDEF_PERFCTR_EXC_HVC				0x8A
-#define ARMV8_IMPDEF_PERFCTR_EXC_TRAP_PABORT			0x8B
-#define ARMV8_IMPDEF_PERFCTR_EXC_TRAP_DABORT			0x8C
-#define ARMV8_IMPDEF_PERFCTR_EXC_TRAP_OTHER			0x8D
-#define ARMV8_IMPDEF_PERFCTR_EXC_TRAP_IRQ			0x8E
-#define ARMV8_IMPDEF_PERFCTR_EXC_TRAP_FIQ			0x8F
-#define ARMV8_IMPDEF_PERFCTR_RC_LD_SPEC				0x90
-#define ARMV8_IMPDEF_PERFCTR_RC_ST_SPEC				0x91
-
-#define ARMV8_IMPDEF_PERFCTR_L3D_CACHE_RD			0xA0
-#define ARMV8_IMPDEF_PERFCTR_L3D_CACHE_WR			0xA1
-#define ARMV8_IMPDEF_PERFCTR_L3D_CACHE_REFILL_RD		0xA2
-#define ARMV8_IMPDEF_PERFCTR_L3D_CACHE_REFILL_WR		0xA3
-
-#define ARMV8_IMPDEF_PERFCTR_L3D_CACHE_WB_VICTIM		0xA6
-#define ARMV8_IMPDEF_PERFCTR_L3D_CACHE_WB_CLEAN			0xA7
-#define ARMV8_IMPDEF_PERFCTR_L3D_CACHE_INVAL			0xA8
+#define ARMV8_IMPDEF_PERFCTR_L1D_CACHE_RD			0x0040
+#define ARMV8_IMPDEF_PERFCTR_L1D_CACHE_WR			0x0041
+#define ARMV8_IMPDEF_PERFCTR_L1D_CACHE_REFILL_RD		0x0042
+#define ARMV8_IMPDEF_PERFCTR_L1D_CACHE_REFILL_WR		0x0043
+#define ARMV8_IMPDEF_PERFCTR_L1D_CACHE_REFILL_INNER		0x0044
+#define ARMV8_IMPDEF_PERFCTR_L1D_CACHE_REFILL_OUTER		0x0045
+#define ARMV8_IMPDEF_PERFCTR_L1D_CACHE_WB_VICTIM		0x0046
+#define ARMV8_IMPDEF_PERFCTR_L1D_CACHE_WB_CLEAN			0x0047
+#define ARMV8_IMPDEF_PERFCTR_L1D_CACHE_INVAL			0x0048
+
+#define ARMV8_IMPDEF_PERFCTR_L1D_TLB_REFILL_RD			0x004C
+#define ARMV8_IMPDEF_PERFCTR_L1D_TLB_REFILL_WR			0x004D
+#define ARMV8_IMPDEF_PERFCTR_L1D_TLB_RD				0x004E
+#define ARMV8_IMPDEF_PERFCTR_L1D_TLB_WR				0x004F
+#define ARMV8_IMPDEF_PERFCTR_L2D_CACHE_RD			0x0050
+#define ARMV8_IMPDEF_PERFCTR_L2D_CACHE_WR			0x0051
+#define ARMV8_IMPDEF_PERFCTR_L2D_CACHE_REFILL_RD		0x0052
+#define ARMV8_IMPDEF_PERFCTR_L2D_CACHE_REFILL_WR		0x0053
+
+#define ARMV8_IMPDEF_PERFCTR_L2D_CACHE_WB_VICTIM		0x0056
+#define ARMV8_IMPDEF_PERFCTR_L2D_CACHE_WB_CLEAN			0x0057
+#define ARMV8_IMPDEF_PERFCTR_L2D_CACHE_INVAL			0x0058
+
+#define ARMV8_IMPDEF_PERFCTR_L2D_TLB_REFILL_RD			0x005C
+#define ARMV8_IMPDEF_PERFCTR_L2D_TLB_REFILL_WR			0x005D
+#define ARMV8_IMPDEF_PERFCTR_L2D_TLB_RD				0x005E
+#define ARMV8_IMPDEF_PERFCTR_L2D_TLB_WR				0x005F
+#define ARMV8_IMPDEF_PERFCTR_BUS_ACCESS_RD			0x0060
+#define ARMV8_IMPDEF_PERFCTR_BUS_ACCESS_WR			0x0061
+#define ARMV8_IMPDEF_PERFCTR_BUS_ACCESS_SHARED			0x0062
+#define ARMV8_IMPDEF_PERFCTR_BUS_ACCESS_NOT_SHARED		0x0063
+#define ARMV8_IMPDEF_PERFCTR_BUS_ACCESS_NORMAL			0x0064
+#define ARMV8_IMPDEF_PERFCTR_BUS_ACCESS_PERIPH			0x0065
+#define ARMV8_IMPDEF_PERFCTR_MEM_ACCESS_RD			0x0066
+#define ARMV8_IMPDEF_PERFCTR_MEM_ACCESS_WR			0x0067
+#define ARMV8_IMPDEF_PERFCTR_UNALIGNED_LD_SPEC			0x0068
+#define ARMV8_IMPDEF_PERFCTR_UNALIGNED_ST_SPEC			0x0069
+#define ARMV8_IMPDEF_PERFCTR_UNALIGNED_LDST_SPEC		0x006A
+
+#define ARMV8_IMPDEF_PERFCTR_LDREX_SPEC				0x006C
+#define ARMV8_IMPDEF_PERFCTR_STREX_PASS_SPEC			0x006D
+#define ARMV8_IMPDEF_PERFCTR_STREX_FAIL_SPEC			0x006E
+#define ARMV8_IMPDEF_PERFCTR_STREX_SPEC				0x006F
+#define ARMV8_IMPDEF_PERFCTR_LD_SPEC				0x0070
+#define ARMV8_IMPDEF_PERFCTR_ST_SPEC				0x0071
+#define ARMV8_IMPDEF_PERFCTR_LDST_SPEC				0x0072
+#define ARMV8_IMPDEF_PERFCTR_DP_SPEC				0x0073
+#define ARMV8_IMPDEF_PERFCTR_ASE_SPEC				0x0074
+#define ARMV8_IMPDEF_PERFCTR_VFP_SPEC				0x0075
+#define ARMV8_IMPDEF_PERFCTR_PC_WRITE_SPEC			0x0076
+#define ARMV8_IMPDEF_PERFCTR_CRYPTO_SPEC			0x0077
+#define ARMV8_IMPDEF_PERFCTR_BR_IMMED_SPEC			0x0078
+#define ARMV8_IMPDEF_PERFCTR_BR_RETURN_SPEC			0x0079
+#define ARMV8_IMPDEF_PERFCTR_BR_INDIRECT_SPEC			0x007A
+
+#define ARMV8_IMPDEF_PERFCTR_ISB_SPEC				0x007C
+#define ARMV8_IMPDEF_PERFCTR_DSB_SPEC				0x007D
+#define ARMV8_IMPDEF_PERFCTR_DMB_SPEC				0x007E
+
+#define ARMV8_IMPDEF_PERFCTR_EXC_UNDEF				0x0081
+#define ARMV8_IMPDEF_PERFCTR_EXC_SVC				0x0082
+#define ARMV8_IMPDEF_PERFCTR_EXC_PABORT				0x0083
+#define ARMV8_IMPDEF_PERFCTR_EXC_DABORT				0x0084
+
+#define ARMV8_IMPDEF_PERFCTR_EXC_IRQ				0x0086
+#define ARMV8_IMPDEF_PERFCTR_EXC_FIQ				0x0087
+#define ARMV8_IMPDEF_PERFCTR_EXC_SMC				0x0088
+
+#define ARMV8_IMPDEF_PERFCTR_EXC_HVC				0x008A
+#define ARMV8_IMPDEF_PERFCTR_EXC_TRAP_PABORT			0x008B
+#define ARMV8_IMPDEF_PERFCTR_EXC_TRAP_DABORT			0x008C
+#define ARMV8_IMPDEF_PERFCTR_EXC_TRAP_OTHER			0x008D
+#define ARMV8_IMPDEF_PERFCTR_EXC_TRAP_IRQ			0x008E
+#define ARMV8_IMPDEF_PERFCTR_EXC_TRAP_FIQ			0x008F
+#define ARMV8_IMPDEF_PERFCTR_RC_LD_SPEC				0x0090
+#define ARMV8_IMPDEF_PERFCTR_RC_ST_SPEC				0x0091
+
+#define ARMV8_IMPDEF_PERFCTR_L3D_CACHE_RD			0x00A0
+#define ARMV8_IMPDEF_PERFCTR_L3D_CACHE_WR			0x00A1
+#define ARMV8_IMPDEF_PERFCTR_L3D_CACHE_REFILL_RD		0x00A2
+#define ARMV8_IMPDEF_PERFCTR_L3D_CACHE_REFILL_WR		0x00A3
+
+#define ARMV8_IMPDEF_PERFCTR_L3D_CACHE_WB_VICTIM		0x00A6
+#define ARMV8_IMPDEF_PERFCTR_L3D_CACHE_WB_CLEAN			0x00A7
+#define ARMV8_IMPDEF_PERFCTR_L3D_CACHE_INVAL			0x00A8
 
 /*
  * Per-CPU PMCR: config reg
diff --git a/arch/arm64/include/asm/pgtable-hwdef.h b/arch/arm64/include/asm/pgtable-hwdef.h
index 40085e53f573..66671ff05183 100644
--- a/arch/arm64/include/asm/pgtable-hwdef.h
+++ b/arch/arm64/include/asm/pgtable-hwdef.h
@@ -273,6 +273,8 @@
 #define TCR_NFD1		(UL(1) << 54)
 #define TCR_E0PD0		(UL(1) << 55)
 #define TCR_E0PD1		(UL(1) << 56)
+#define TCR_TCMA0		(UL(1) << 57)
+#define TCR_TCMA1		(UL(1) << 58)
 
 /*
  * TTBR.
diff --git a/arch/arm64/include/asm/pgtable-prot.h b/arch/arm64/include/asm/pgtable-prot.h
index 7032f04c8ac6..b1e1b74d993c 100644
--- a/arch/arm64/include/asm/pgtable-prot.h
+++ b/arch/arm64/include/asm/pgtable-prot.h
@@ -92,7 +92,7 @@ extern bool arm64_use_ng_mappings;
 #define __P001  PAGE_READONLY
 #define __P010  PAGE_READONLY
 #define __P011  PAGE_READONLY
-#define __P100  PAGE_EXECONLY
+#define __P100  PAGE_READONLY_EXEC	/* PAGE_EXECONLY if Enhanced PAN */
 #define __P101  PAGE_READONLY_EXEC
 #define __P110  PAGE_READONLY_EXEC
 #define __P111  PAGE_READONLY_EXEC
@@ -101,7 +101,7 @@ extern bool arm64_use_ng_mappings;
 #define __S001  PAGE_READONLY
 #define __S010  PAGE_SHARED
 #define __S011  PAGE_SHARED
-#define __S100  PAGE_EXECONLY
+#define __S100  PAGE_READONLY_EXEC	/* PAGE_EXECONLY if Enhanced PAN */
 #define __S101  PAGE_READONLY_EXEC
 #define __S110  PAGE_SHARED_EXEC
 #define __S111  PAGE_SHARED_EXEC
diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h
index c4ba047a82d2..94e147e5456c 100644
--- a/arch/arm64/include/asm/pgtable.h
+++ b/arch/arm64/include/asm/pgtable.h
@@ -1017,17 +1017,6 @@ static inline bool arch_wants_old_prefaulted_pte(void)
 }
 #define arch_wants_old_prefaulted_pte	arch_wants_old_prefaulted_pte
 
-static inline pgprot_t arch_filter_pgprot(pgprot_t prot)
-{
-	if (cpus_have_const_cap(ARM64_HAS_EPAN))
-		return prot;
-
-	if (pgprot_val(prot) != pgprot_val(PAGE_EXECONLY))
-		return prot;
-
-	return PAGE_READONLY_EXEC;
-}
-
 static inline bool pud_sect_supported(void)
 {
 	return PAGE_SIZE == SZ_4K;
diff --git a/arch/arm64/include/asm/preempt.h b/arch/arm64/include/asm/preempt.h
index e83f0982b99c..0159b625cc7f 100644
--- a/arch/arm64/include/asm/preempt.h
+++ b/arch/arm64/include/asm/preempt.h
@@ -2,6 +2,7 @@
 #ifndef __ASM_PREEMPT_H
 #define __ASM_PREEMPT_H
 
+#include <linux/jump_label.h>
 #include <linux/thread_info.h>
 
 #define PREEMPT_NEED_RESCHED	BIT(32)
@@ -80,10 +81,24 @@ static inline bool should_resched(int preempt_offset)
 }
 
 #ifdef CONFIG_PREEMPTION
+
 void preempt_schedule(void);
-#define __preempt_schedule() preempt_schedule()
 void preempt_schedule_notrace(void);
-#define __preempt_schedule_notrace() preempt_schedule_notrace()
+
+#ifdef CONFIG_PREEMPT_DYNAMIC
+
+DECLARE_STATIC_KEY_TRUE(sk_dynamic_irqentry_exit_cond_resched);
+void dynamic_preempt_schedule(void);
+#define __preempt_schedule()		dynamic_preempt_schedule()
+void dynamic_preempt_schedule_notrace(void);
+#define __preempt_schedule_notrace()	dynamic_preempt_schedule_notrace()
+
+#else /* CONFIG_PREEMPT_DYNAMIC */
+
+#define __preempt_schedule()		preempt_schedule()
+#define __preempt_schedule_notrace()	preempt_schedule_notrace()
+
+#endif /* CONFIG_PREEMPT_DYNAMIC */
 #endif /* CONFIG_PREEMPTION */
 
 #endif /* __ASM_PREEMPT_H */
diff --git a/arch/arm64/include/asm/processor.h b/arch/arm64/include/asm/processor.h
index 6f41b65f9962..73e38d9a540c 100644
--- a/arch/arm64/include/asm/processor.h
+++ b/arch/arm64/include/asm/processor.h
@@ -21,6 +21,7 @@
 
 #define MTE_CTRL_TCF_SYNC		(1UL << 16)
 #define MTE_CTRL_TCF_ASYNC		(1UL << 17)
+#define MTE_CTRL_TCF_ASYMM		(1UL << 18)
 
 #ifndef __ASSEMBLY__
 
diff --git a/arch/arm64/include/asm/rwonce.h b/arch/arm64/include/asm/rwonce.h
index 1bce62fa908a..56f7b1d4d54b 100644
--- a/arch/arm64/include/asm/rwonce.h
+++ b/arch/arm64/include/asm/rwonce.h
@@ -5,7 +5,7 @@
 #ifndef __ASM_RWONCE_H
 #define __ASM_RWONCE_H
 
-#ifdef CONFIG_LTO
+#if defined(CONFIG_LTO) && !defined(__ASSEMBLY__)
 
 #include <linux/compiler_types.h>
 #include <asm/alternative-macros.h>
@@ -66,7 +66,7 @@
 })
 
 #endif	/* !BUILD_VDSO */
-#endif	/* CONFIG_LTO */
+#endif	/* CONFIG_LTO && !__ASSEMBLY__ */
 
 #include <asm-generic/rwonce.h>
 
diff --git a/arch/arm64/include/asm/sections.h b/arch/arm64/include/asm/sections.h
index 152cb35bf9df..40971ac1303f 100644
--- a/arch/arm64/include/asm/sections.h
+++ b/arch/arm64/include/asm/sections.h
@@ -23,4 +23,9 @@ extern char __mmuoff_data_start[], __mmuoff_data_end[];
 extern char __entry_tramp_text_start[], __entry_tramp_text_end[];
 extern char __relocate_new_kernel_start[], __relocate_new_kernel_end[];
 
+static inline size_t entry_tramp_text_size(void)
+{
+	return __entry_tramp_text_end - __entry_tramp_text_start;
+}
+
 #endif /* __ASM_SECTIONS_H */
diff --git a/arch/arm64/include/asm/spectre.h b/arch/arm64/include/asm/spectre.h
index f62ca39da6c5..aa3d3607d5c8 100644
--- a/arch/arm64/include/asm/spectre.h
+++ b/arch/arm64/include/asm/spectre.h
@@ -67,7 +67,8 @@ struct bp_hardening_data {
 
 DECLARE_PER_CPU_READ_MOSTLY(struct bp_hardening_data, bp_hardening_data);
 
-static inline void arm64_apply_bp_hardening(void)
+/* Called during entry so must be __always_inline */
+static __always_inline void arm64_apply_bp_hardening(void)
 {
 	struct bp_hardening_data *d;
 
@@ -93,5 +94,9 @@ void spectre_v4_enable_task_mitigation(struct task_struct *tsk);
 
 enum mitigation_state arm64_get_meltdown_state(void);
 
+enum mitigation_state arm64_get_spectre_bhb_state(void);
+bool is_spectre_bhb_affected(const struct arm64_cpu_capabilities *entry, int scope);
+u8 spectre_bhb_loop_affected(int scope);
+void spectre_bhb_enable_mitigation(const struct arm64_cpu_capabilities *__unused);
 #endif	/* __ASSEMBLY__ */
 #endif	/* __ASM_SPECTRE_H */
diff --git a/arch/arm64/include/asm/string.h b/arch/arm64/include/asm/string.h
index 95f7686b728d..3a3264ff47b9 100644
--- a/arch/arm64/include/asm/string.h
+++ b/arch/arm64/include/asm/string.h
@@ -12,13 +12,11 @@ extern char *strrchr(const char *, int c);
 #define __HAVE_ARCH_STRCHR
 extern char *strchr(const char *, int c);
 
-#ifndef CONFIG_KASAN_HW_TAGS
 #define __HAVE_ARCH_STRCMP
 extern int strcmp(const char *, const char *);
 
 #define __HAVE_ARCH_STRNCMP
 extern int strncmp(const char *, const char *, __kernel_size_t);
-#endif
 
 #define __HAVE_ARCH_STRLEN
 extern __kernel_size_t strlen(const char *);
diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
index 898bee0004ae..c7ca3a105528 100644
--- a/arch/arm64/include/asm/sysreg.h
+++ b/arch/arm64/include/asm/sysreg.h
@@ -773,6 +773,9 @@
 #define ID_AA64ISAR1_GPI_IMP_DEF		0x1
 
 /* id_aa64isar2 */
+#define ID_AA64ISAR2_CLEARBHB_SHIFT	28
+#define ID_AA64ISAR2_APA3_SHIFT		12
+#define ID_AA64ISAR2_GPA3_SHIFT		8
 #define ID_AA64ISAR2_RPRES_SHIFT	4
 #define ID_AA64ISAR2_WFXT_SHIFT		0
 
@@ -786,6 +789,16 @@
 #define ID_AA64ISAR2_WFXT_NI		0x0
 #define ID_AA64ISAR2_WFXT_SUPPORTED	0x2
 
+#define ID_AA64ISAR2_APA3_NI			0x0
+#define ID_AA64ISAR2_APA3_ARCHITECTED		0x1
+#define ID_AA64ISAR2_APA3_ARCH_EPAC		0x2
+#define ID_AA64ISAR2_APA3_ARCH_EPAC2		0x3
+#define ID_AA64ISAR2_APA3_ARCH_EPAC2_FPAC	0x4
+#define ID_AA64ISAR2_APA3_ARCH_EPAC2_FPAC_CMB	0x5
+
+#define ID_AA64ISAR2_GPA3_NI			0x0
+#define ID_AA64ISAR2_GPA3_ARCHITECTED		0x1
+
 /* id_aa64pfr0 */
 #define ID_AA64PFR0_CSV3_SHIFT		60
 #define ID_AA64PFR0_CSV2_SHIFT		56
@@ -904,6 +917,7 @@
 #endif
 
 /* id_aa64mmfr1 */
+#define ID_AA64MMFR1_ECBHB_SHIFT	60
 #define ID_AA64MMFR1_AFP_SHIFT		44
 #define ID_AA64MMFR1_ETS_SHIFT		36
 #define ID_AA64MMFR1_TWED_SHIFT		32
@@ -1097,13 +1111,11 @@
 #define ZCR_ELx_LEN_SIZE	9
 #define ZCR_ELx_LEN_MASK	0x1ff
 
+#define CPACR_EL1_FPEN_EL1EN	(BIT(20)) /* enable EL1 access */
+#define CPACR_EL1_FPEN_EL0EN	(BIT(21)) /* enable EL0 access, if EL1EN set */
+
 #define CPACR_EL1_ZEN_EL1EN	(BIT(16)) /* enable EL1 access */
 #define CPACR_EL1_ZEN_EL0EN	(BIT(17)) /* enable EL0 access, if EL1EN set */
-#define CPACR_EL1_ZEN		(CPACR_EL1_ZEN_EL1EN | CPACR_EL1_ZEN_EL0EN)
-
-/* TCR EL1 Bit Definitions */
-#define SYS_TCR_EL1_TCMA1	(BIT(58))
-#define SYS_TCR_EL1_TCMA0	(BIT(57))
 
 /* GCR_EL1 Definitions */
 #define SYS_GCR_EL1_RRND	(BIT(16))
diff --git a/arch/arm64/include/asm/topology.h b/arch/arm64/include/asm/topology.h
index f386b90a79c8..9fab663dd2de 100644
--- a/arch/arm64/include/asm/topology.h
+++ b/arch/arm64/include/asm/topology.h
@@ -24,6 +24,10 @@ void update_freq_counters_refs(void);
 #define arch_scale_freq_capacity topology_get_freq_scale
 #define arch_scale_freq_invariant topology_scale_freq_invariant
 
+#ifdef CONFIG_ACPI_CPPC_LIB
+#define arch_init_invariance_cppc topology_init_cpu_capacity_cppc
+#endif
+
 /* Replace task scheduler's default cpu-invariant accounting */
 #define arch_scale_cpu_capacity topology_get_cpu_scale
 
diff --git a/arch/arm64/include/asm/uaccess.h b/arch/arm64/include/asm/uaccess.h
index 3a5ff5e20586..e8dce0cc5eaa 100644
--- a/arch/arm64/include/asm/uaccess.h
+++ b/arch/arm64/include/asm/uaccess.h
@@ -26,7 +26,7 @@
 #include <asm/memory.h>
 #include <asm/extable.h>
 
-#define HAVE_GET_KERNEL_NOFAULT
+static inline int __access_ok(const void __user *ptr, unsigned long size);
 
 /*
  * Test whether a block of memory is a valid user space address.
@@ -35,10 +35,8 @@
  * This is equivalent to the following test:
  * (u65)addr + (u65)size <= (u65)TASK_SIZE_MAX
  */
-static inline unsigned long __range_ok(const void __user *addr, unsigned long size)
+static inline int access_ok(const void __user *addr, unsigned long size)
 {
-	unsigned long ret, limit = TASK_SIZE_MAX - 1;
-
 	/*
 	 * Asynchronous I/O running in a kernel thread does not have the
 	 * TIF_TAGGED_ADDR flag of the process owning the mm, so always untag
@@ -48,28 +46,11 @@ static inline unsigned long __range_ok(const void __user *addr, unsigned long si
 	    (current->flags & PF_KTHREAD || test_thread_flag(TIF_TAGGED_ADDR)))
 		addr = untagged_addr(addr);
 
-	__chk_user_ptr(addr);
-	asm volatile(
-	// A + B <= C + 1 for all A,B,C, in four easy steps:
-	// 1: X = A + B; X' = X % 2^64
-	"	adds	%0, %3, %2\n"
-	// 2: Set C = 0 if X > 2^64, to guarantee X' > C in step 4
-	"	csel	%1, xzr, %1, hi\n"
-	// 3: Set X' = ~0 if X >= 2^64. For X == 2^64, this decrements X'
-	//    to compensate for the carry flag being set in step 4. For
-	//    X > 2^64, X' merely has to remain nonzero, which it does.
-	"	csinv	%0, %0, xzr, cc\n"
-	// 4: For X < 2^64, this gives us X' - C - 1 <= 0, where the -1
-	//    comes from the carry in being clear. Otherwise, we are
-	//    testing X' - C == 0, subject to the previous adjustments.
-	"	sbcs	xzr, %0, %1\n"
-	"	cset	%0, ls\n"
-	: "=&r" (ret), "+r" (limit) : "Ir" (size), "0" (addr) : "cc");
-
-	return ret;
+	return likely(__access_ok(addr, size));
 }
+#define access_ok access_ok
 
-#define access_ok(addr, size)	__range_ok(addr, size)
+#include <asm-generic/access_ok.h>
 
 /*
  * User access enabling/disabling.
diff --git a/arch/arm64/include/asm/vectors.h b/arch/arm64/include/asm/vectors.h
new file mode 100644
index 000000000000..bc9a2145f419
--- /dev/null
+++ b/arch/arm64/include/asm/vectors.h
@@ -0,0 +1,73 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2022 ARM Ltd.
+ */
+#ifndef __ASM_VECTORS_H
+#define __ASM_VECTORS_H
+
+#include <linux/bug.h>
+#include <linux/percpu.h>
+
+#include <asm/fixmap.h>
+
+extern char vectors[];
+extern char tramp_vectors[];
+extern char __bp_harden_el1_vectors[];
+
+/*
+ * Note: the order of this enum corresponds to two arrays in entry.S:
+ * tramp_vecs and __bp_harden_el1_vectors. By default the canonical
+ * 'full fat' vectors are used directly.
+ */
+enum arm64_bp_harden_el1_vectors {
+#ifdef CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY
+	/*
+	 * Perform the BHB loop mitigation, before branching to the canonical
+	 * vectors.
+	 */
+	EL1_VECTOR_BHB_LOOP,
+
+	/*
+	 * Make the SMC call for firmware mitigation, before branching to the
+	 * canonical vectors.
+	 */
+	EL1_VECTOR_BHB_FW,
+
+	/*
+	 * Use the ClearBHB instruction, before branching to the canonical
+	 * vectors.
+	 */
+	EL1_VECTOR_BHB_CLEAR_INSN,
+#endif /* CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY */
+
+	/*
+	 * Remap the kernel before branching to the canonical vectors.
+	 */
+	EL1_VECTOR_KPTI,
+};
+
+#ifndef CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY
+#define EL1_VECTOR_BHB_LOOP		-1
+#define EL1_VECTOR_BHB_FW		-1
+#define EL1_VECTOR_BHB_CLEAR_INSN	-1
+#endif /* !CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY */
+
+/* The vectors to use on return from EL0. e.g. to remap the kernel */
+DECLARE_PER_CPU_READ_MOSTLY(const char *, this_cpu_vector);
+
+#ifndef CONFIG_UNMAP_KERNEL_AT_EL0
+#define TRAMP_VALIAS	0ul
+#endif
+
+static inline const char *
+arm64_get_bp_hardening_vector(enum arm64_bp_harden_el1_vectors slot)
+{
+	if (arm64_kernel_unmapped_at_el0())
+		return (char *)(TRAMP_VALIAS + SZ_2K * slot);
+
+	WARN_ON_ONCE(slot == EL1_VECTOR_KPTI);
+
+	return __bp_harden_el1_vectors + SZ_2K * slot;
+}
+
+#endif /* __ASM_VECTORS_H */
diff --git a/arch/arm64/include/asm/xor.h b/arch/arm64/include/asm/xor.h
index 947f6a4f1aa0..befcd8a7abc9 100644
--- a/arch/arm64/include/asm/xor.h
+++ b/arch/arm64/include/asm/xor.h
@@ -16,7 +16,8 @@
 extern struct xor_block_template const xor_block_inner_neon;
 
 static void
-xor_neon_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
+xor_neon_2(unsigned long bytes, unsigned long * __restrict p1,
+	   const unsigned long * __restrict p2)
 {
 	kernel_neon_begin();
 	xor_block_inner_neon.do_2(bytes, p1, p2);
@@ -24,8 +25,9 @@ xor_neon_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
 }
 
 static void
-xor_neon_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-		unsigned long *p3)
+xor_neon_3(unsigned long bytes, unsigned long * __restrict p1,
+	   const unsigned long * __restrict p2,
+	   const unsigned long * __restrict p3)
 {
 	kernel_neon_begin();
 	xor_block_inner_neon.do_3(bytes, p1, p2, p3);
@@ -33,8 +35,10 @@ xor_neon_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
 }
 
 static void
-xor_neon_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-		unsigned long *p3, unsigned long *p4)
+xor_neon_4(unsigned long bytes, unsigned long * __restrict p1,
+	   const unsigned long * __restrict p2,
+	   const unsigned long * __restrict p3,
+	   const unsigned long * __restrict p4)
 {
 	kernel_neon_begin();
 	xor_block_inner_neon.do_4(bytes, p1, p2, p3, p4);
@@ -42,8 +46,11 @@ xor_neon_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
 }
 
 static void
-xor_neon_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-		unsigned long *p3, unsigned long *p4, unsigned long *p5)
+xor_neon_5(unsigned long bytes, unsigned long * __restrict p1,
+	   const unsigned long * __restrict p2,
+	   const unsigned long * __restrict p3,
+	   const unsigned long * __restrict p4,
+	   const unsigned long * __restrict p5)
 {
 	kernel_neon_begin();
 	xor_block_inner_neon.do_5(bytes, p1, p2, p3, p4, p5);
diff --git a/arch/arm64/include/uapi/asm/hwcap.h b/arch/arm64/include/uapi/asm/hwcap.h
index f03731847d9d..99cb5d383048 100644
--- a/arch/arm64/include/uapi/asm/hwcap.h
+++ b/arch/arm64/include/uapi/asm/hwcap.h
@@ -78,5 +78,6 @@
 #define HWCAP2_ECV		(1 << 19)
 #define HWCAP2_AFP		(1 << 20)
 #define HWCAP2_RPRES		(1 << 21)
+#define HWCAP2_MTE3		(1 << 22)
 
 #endif /* _UAPI__ASM_HWCAP_H */
diff --git a/arch/arm64/include/uapi/asm/kvm.h b/arch/arm64/include/uapi/asm/kvm.h
index b3edde68bc3e..323e251ed37b 100644
--- a/arch/arm64/include/uapi/asm/kvm.h
+++ b/arch/arm64/include/uapi/asm/kvm.h
@@ -281,6 +281,11 @@ struct kvm_arm_copy_mte_tags {
 #define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_REQUIRED	3
 #define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_ENABLED     	(1U << 4)
 
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3	KVM_REG_ARM_FW_REG(3)
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3_NOT_AVAIL		0
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3_AVAIL		1
+#define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3_NOT_REQUIRED	2
+
 /* SVE registers */
 #define KVM_REG_ARM64_SVE		(0x15 << KVM_REG_ARM_COPROC_SHIFT)
 
diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile
index 88b3e2a21408..986837d7ec82 100644
--- a/arch/arm64/kernel/Makefile
+++ b/arch/arm64/kernel/Makefile
@@ -61,6 +61,7 @@ obj-$(CONFIG_ARM64_ACPI_PARKING_PROTOCOL)	+= acpi_parking_protocol.o
 obj-$(CONFIG_PARAVIRT)			+= paravirt.o
 obj-$(CONFIG_RANDOMIZE_BASE)		+= kaslr.o
 obj-$(CONFIG_HIBERNATION)		+= hibernate.o hibernate-asm.o
+obj-$(CONFIG_ELF_CORE)			+= elfcore.o
 obj-$(CONFIG_KEXEC_CORE)		+= machine_kexec.o relocate_kernel.o	\
 					   cpu-reset.o
 obj-$(CONFIG_KEXEC_FILE)		+= machine_kexec_file.o kexec_image.o
diff --git a/arch/arm64/kernel/cpu_errata.c b/arch/arm64/kernel/cpu_errata.c
index 066098198c24..4c9b5b4b7a0b 100644
--- a/arch/arm64/kernel/cpu_errata.c
+++ b/arch/arm64/kernel/cpu_errata.c
@@ -214,6 +214,21 @@ static const struct arm64_cpu_capabilities arm64_repeat_tlbi_list[] = {
 };
 #endif
 
+#ifdef CONFIG_CAVIUM_ERRATUM_23154
+const struct midr_range cavium_erratum_23154_cpus[] = {
+	MIDR_ALL_VERSIONS(MIDR_THUNDERX),
+	MIDR_ALL_VERSIONS(MIDR_THUNDERX_81XX),
+	MIDR_ALL_VERSIONS(MIDR_THUNDERX_83XX),
+	MIDR_ALL_VERSIONS(MIDR_OCTX2_98XX),
+	MIDR_ALL_VERSIONS(MIDR_OCTX2_96XX),
+	MIDR_ALL_VERSIONS(MIDR_OCTX2_95XX),
+	MIDR_ALL_VERSIONS(MIDR_OCTX2_95XXN),
+	MIDR_ALL_VERSIONS(MIDR_OCTX2_95XXMM),
+	MIDR_ALL_VERSIONS(MIDR_OCTX2_95XXO),
+	{},
+};
+#endif
+
 #ifdef CONFIG_CAVIUM_ERRATUM_27456
 const struct midr_range cavium_erratum_27456_cpus[] = {
 	/* Cavium ThunderX, T88 pass 1.x - 2.1 */
@@ -425,10 +440,10 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
 #endif
 #ifdef CONFIG_CAVIUM_ERRATUM_23154
 	{
-	/* Cavium ThunderX, pass 1.x */
-		.desc = "Cavium erratum 23154",
+		.desc = "Cavium errata 23154 and 38545",
 		.capability = ARM64_WORKAROUND_CAVIUM_23154,
-		ERRATA_MIDR_REV_RANGE(MIDR_THUNDERX, 0, 0, 1),
+		.type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM,
+		ERRATA_MIDR_RANGE_LIST(cavium_erratum_23154_cpus),
 	},
 #endif
 #ifdef CONFIG_CAVIUM_ERRATUM_27456
@@ -502,6 +517,13 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
 		.matches = has_spectre_v4,
 		.cpu_enable = spectre_v4_enable_mitigation,
 	},
+	{
+		.desc = "Spectre-BHB",
+		.capability = ARM64_SPECTRE_BHB,
+		.type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM,
+		.matches = is_spectre_bhb_affected,
+		.cpu_enable = spectre_bhb_enable_mitigation,
+	},
 #ifdef CONFIG_ARM64_ERRATUM_1418040
 	{
 		.desc = "ARM erratum 1418040",
@@ -600,6 +622,13 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
 		CAP_MIDR_RANGE_LIST(trbe_write_out_of_range_cpus),
 	},
 #endif
+#ifdef CONFIG_ARM64_ERRATUM_2077057
+	{
+		.desc = "ARM erratum 2077057",
+		.capability = ARM64_WORKAROUND_2077057,
+		ERRATA_MIDR_REV_RANGE(MIDR_CORTEX_A510, 0, 0, 2),
+	},
+#endif
 #ifdef CONFIG_ARM64_ERRATUM_2064142
 	{
 		.desc = "ARM erratum 2064142",
diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c
index e5f23dab1c8d..d72c4b4d389c 100644
--- a/arch/arm64/kernel/cpufeature.c
+++ b/arch/arm64/kernel/cpufeature.c
@@ -73,6 +73,8 @@
 #include <linux/mm.h>
 #include <linux/cpu.h>
 #include <linux/kasan.h>
+#include <linux/percpu.h>
+
 #include <asm/cpu.h>
 #include <asm/cpufeature.h>
 #include <asm/cpu_ops.h>
@@ -85,6 +87,7 @@
 #include <asm/smp.h>
 #include <asm/sysreg.h>
 #include <asm/traps.h>
+#include <asm/vectors.h>
 #include <asm/virt.h>
 
 /* Kernel representation of AT_HWCAP and AT_HWCAP2 */
@@ -110,6 +113,8 @@ DECLARE_BITMAP(boot_capabilities, ARM64_NPATCHABLE);
 bool arm64_use_ng_mappings = false;
 EXPORT_SYMBOL(arm64_use_ng_mappings);
 
+DEFINE_PER_CPU_READ_MOSTLY(const char *, this_cpu_vector) = vectors;
+
 /*
  * Permit PER_LINUX32 and execve() of 32-bit binaries even if not all CPUs
  * support it?
@@ -226,6 +231,11 @@ static const struct arm64_ftr_bits ftr_id_aa64isar1[] = {
 };
 
 static const struct arm64_ftr_bits ftr_id_aa64isar2[] = {
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_STRICT, FTR_HIGHER_SAFE, ID_AA64ISAR2_CLEARBHB_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_PTR_AUTH),
+		       FTR_STRICT, FTR_EXACT, ID_AA64ISAR2_APA3_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_PTR_AUTH),
+		       FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR2_GPA3_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_VISIBLE, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64ISAR2_RPRES_SHIFT, 4, 0),
 	ARM64_FTR_END,
 };
@@ -596,6 +606,7 @@ static const struct arm64_ftr_bits ftr_raz[] = {
 struct arm64_ftr_override __ro_after_init id_aa64mmfr1_override;
 struct arm64_ftr_override __ro_after_init id_aa64pfr1_override;
 struct arm64_ftr_override __ro_after_init id_aa64isar1_override;
+struct arm64_ftr_override __ro_after_init id_aa64isar2_override;
 
 static const struct __ftr_reg_entry {
 	u32			sys_id;
@@ -644,6 +655,8 @@ static const struct __ftr_reg_entry {
 	ARM64_FTR_REG_OVERRIDE(SYS_ID_AA64ISAR1_EL1, ftr_id_aa64isar1,
 			       &id_aa64isar1_override),
 	ARM64_FTR_REG(SYS_ID_AA64ISAR2_EL1, ftr_id_aa64isar2),
+	ARM64_FTR_REG_OVERRIDE(SYS_ID_AA64ISAR2_EL1, ftr_id_aa64isar2,
+			       &id_aa64isar2_override),
 
 	/* Op1 = 0, CRn = 0, CRm = 7 */
 	ARM64_FTR_REG(SYS_ID_AA64MMFR0_EL1, ftr_id_aa64mmfr0),
@@ -1307,7 +1320,9 @@ u64 __read_sysreg_by_encoding(u32 sys_id)
 static bool
 feature_matches(u64 reg, const struct arm64_cpu_capabilities *entry)
 {
-	int val = cpuid_feature_extract_field(reg, entry->field_pos, entry->sign);
+	int val = cpuid_feature_extract_field_width(reg, entry->field_pos,
+						    entry->field_width,
+						    entry->sign);
 
 	return val >= entry->min_field_value;
 }
@@ -1590,6 +1605,12 @@ kpti_install_ng_mappings(const struct arm64_cpu_capabilities *__unused)
 
 	int cpu = smp_processor_id();
 
+	if (__this_cpu_read(this_cpu_vector) == vectors) {
+		const char *v = arm64_get_bp_hardening_vector(EL1_VECTOR_KPTI);
+
+		__this_cpu_write(this_cpu_vector, v);
+	}
+
 	/*
 	 * We don't need to rewrite the page-tables if either we've done
 	 * it already or we have KASLR enabled and therefore have not
@@ -1775,14 +1796,6 @@ static void cpu_copy_el2regs(const struct arm64_cpu_capabilities *__unused)
 		write_sysreg(read_sysreg(tpidr_el1), tpidr_el2);
 }
 
-static void cpu_has_fwb(const struct arm64_cpu_capabilities *__unused)
-{
-	u64 val = read_sysreg_s(SYS_CLIDR_EL1);
-
-	/* Check that CLIDR_EL1.LOU{U,IS} are both 0 */
-	WARN_ON(CLIDR_LOUU(val) || CLIDR_LOUIS(val));
-}
-
 #ifdef CONFIG_ARM64_PAN
 static void cpu_enable_pan(const struct arm64_cpu_capabilities *__unused)
 {
@@ -1829,21 +1842,27 @@ static bool has_address_auth_cpucap(const struct arm64_cpu_capabilities *entry,
 	/* Now check for the secondary CPUs with SCOPE_LOCAL_CPU scope */
 	sec_val = cpuid_feature_extract_field(__read_sysreg_by_encoding(entry->sys_reg),
 					      entry->field_pos, entry->sign);
-	return sec_val == boot_val;
+	return (sec_val >= entry->min_field_value) && (sec_val == boot_val);
 }
 
 static bool has_address_auth_metacap(const struct arm64_cpu_capabilities *entry,
 				     int scope)
 {
-	return has_address_auth_cpucap(cpu_hwcaps_ptrs[ARM64_HAS_ADDRESS_AUTH_ARCH], scope) ||
-	       has_address_auth_cpucap(cpu_hwcaps_ptrs[ARM64_HAS_ADDRESS_AUTH_IMP_DEF], scope);
+	bool api = has_address_auth_cpucap(cpu_hwcaps_ptrs[ARM64_HAS_ADDRESS_AUTH_IMP_DEF], scope);
+	bool apa = has_address_auth_cpucap(cpu_hwcaps_ptrs[ARM64_HAS_ADDRESS_AUTH_ARCH_QARMA5], scope);
+	bool apa3 = has_address_auth_cpucap(cpu_hwcaps_ptrs[ARM64_HAS_ADDRESS_AUTH_ARCH_QARMA3], scope);
+
+	return apa || apa3 || api;
 }
 
 static bool has_generic_auth(const struct arm64_cpu_capabilities *entry,
 			     int __unused)
 {
-	return __system_matches_cap(ARM64_HAS_GENERIC_AUTH_ARCH) ||
-	       __system_matches_cap(ARM64_HAS_GENERIC_AUTH_IMP_DEF);
+	bool gpi = __system_matches_cap(ARM64_HAS_GENERIC_AUTH_IMP_DEF);
+	bool gpa = __system_matches_cap(ARM64_HAS_GENERIC_AUTH_ARCH_QARMA5);
+	bool gpa3 = __system_matches_cap(ARM64_HAS_GENERIC_AUTH_ARCH_QARMA3);
+
+	return gpa || gpa3 || gpi;
 }
 #endif /* CONFIG_ARM64_PTR_AUTH */
 
@@ -1945,6 +1964,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.matches = has_useable_gicv3_cpuif,
 		.sys_reg = SYS_ID_AA64PFR0_EL1,
 		.field_pos = ID_AA64PFR0_GIC_SHIFT,
+		.field_width = 4,
 		.sign = FTR_UNSIGNED,
 		.min_field_value = 1,
 	},
@@ -1955,6 +1975,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.matches = has_cpuid_feature,
 		.sys_reg = SYS_ID_AA64MMFR0_EL1,
 		.field_pos = ID_AA64MMFR0_ECV_SHIFT,
+		.field_width = 4,
 		.sign = FTR_UNSIGNED,
 		.min_field_value = 1,
 	},
@@ -1966,6 +1987,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.matches = has_cpuid_feature,
 		.sys_reg = SYS_ID_AA64MMFR1_EL1,
 		.field_pos = ID_AA64MMFR1_PAN_SHIFT,
+		.field_width = 4,
 		.sign = FTR_UNSIGNED,
 		.min_field_value = 1,
 		.cpu_enable = cpu_enable_pan,
@@ -1979,6 +2001,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.matches = has_cpuid_feature,
 		.sys_reg = SYS_ID_AA64MMFR1_EL1,
 		.field_pos = ID_AA64MMFR1_PAN_SHIFT,
+		.field_width = 4,
 		.sign = FTR_UNSIGNED,
 		.min_field_value = 3,
 	},
@@ -1991,6 +2014,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.matches = has_cpuid_feature,
 		.sys_reg = SYS_ID_AA64ISAR0_EL1,
 		.field_pos = ID_AA64ISAR0_ATOMICS_SHIFT,
+		.field_width = 4,
 		.sign = FTR_UNSIGNED,
 		.min_field_value = 2,
 	},
@@ -2015,6 +2039,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.sys_reg = SYS_ID_AA64PFR0_EL1,
 		.sign = FTR_UNSIGNED,
 		.field_pos = ID_AA64PFR0_EL0_SHIFT,
+		.field_width = 4,
 		.min_field_value = ID_AA64PFR0_ELx_32BIT_64BIT,
 	},
 #ifdef CONFIG_KVM
@@ -2026,6 +2051,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.sys_reg = SYS_ID_AA64PFR0_EL1,
 		.sign = FTR_UNSIGNED,
 		.field_pos = ID_AA64PFR0_EL1_SHIFT,
+		.field_width = 4,
 		.min_field_value = ID_AA64PFR0_ELx_32BIT_64BIT,
 	},
 	{
@@ -2046,6 +2072,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		 */
 		.sys_reg = SYS_ID_AA64PFR0_EL1,
 		.field_pos = ID_AA64PFR0_CSV3_SHIFT,
+		.field_width = 4,
 		.min_field_value = 1,
 		.matches = unmap_kernel_at_el0,
 		.cpu_enable = kpti_install_ng_mappings,
@@ -2065,6 +2092,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.matches = has_cpuid_feature,
 		.sys_reg = SYS_ID_AA64ISAR1_EL1,
 		.field_pos = ID_AA64ISAR1_DPB_SHIFT,
+		.field_width = 4,
 		.min_field_value = 1,
 	},
 	{
@@ -2075,6 +2103,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.sys_reg = SYS_ID_AA64ISAR1_EL1,
 		.sign = FTR_UNSIGNED,
 		.field_pos = ID_AA64ISAR1_DPB_SHIFT,
+		.field_width = 4,
 		.min_field_value = 2,
 	},
 #endif
@@ -2086,6 +2115,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.sys_reg = SYS_ID_AA64PFR0_EL1,
 		.sign = FTR_UNSIGNED,
 		.field_pos = ID_AA64PFR0_SVE_SHIFT,
+		.field_width = 4,
 		.min_field_value = ID_AA64PFR0_SVE,
 		.matches = has_cpuid_feature,
 		.cpu_enable = sve_kernel_enable,
@@ -2100,6 +2130,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.sys_reg = SYS_ID_AA64PFR0_EL1,
 		.sign = FTR_UNSIGNED,
 		.field_pos = ID_AA64PFR0_RAS_SHIFT,
+		.field_width = 4,
 		.min_field_value = ID_AA64PFR0_RAS_V1,
 		.cpu_enable = cpu_clear_disr,
 	},
@@ -2118,6 +2149,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.sys_reg = SYS_ID_AA64PFR0_EL1,
 		.sign = FTR_UNSIGNED,
 		.field_pos = ID_AA64PFR0_AMU_SHIFT,
+		.field_width = 4,
 		.min_field_value = ID_AA64PFR0_AMU,
 		.cpu_enable = cpu_amu_enable,
 	},
@@ -2142,9 +2174,9 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.sys_reg = SYS_ID_AA64MMFR2_EL1,
 		.sign = FTR_UNSIGNED,
 		.field_pos = ID_AA64MMFR2_FWB_SHIFT,
+		.field_width = 4,
 		.min_field_value = 1,
 		.matches = has_cpuid_feature,
-		.cpu_enable = cpu_has_fwb,
 	},
 	{
 		.desc = "ARMv8.4 Translation Table Level",
@@ -2153,6 +2185,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.sys_reg = SYS_ID_AA64MMFR2_EL1,
 		.sign = FTR_UNSIGNED,
 		.field_pos = ID_AA64MMFR2_TTL_SHIFT,
+		.field_width = 4,
 		.min_field_value = 1,
 		.matches = has_cpuid_feature,
 	},
@@ -2163,6 +2196,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.matches = has_cpuid_feature,
 		.sys_reg = SYS_ID_AA64ISAR0_EL1,
 		.field_pos = ID_AA64ISAR0_TLB_SHIFT,
+		.field_width = 4,
 		.sign = FTR_UNSIGNED,
 		.min_field_value = ID_AA64ISAR0_TLB_RANGE,
 	},
@@ -2181,6 +2215,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.sys_reg = SYS_ID_AA64MMFR1_EL1,
 		.sign = FTR_UNSIGNED,
 		.field_pos = ID_AA64MMFR1_HADBS_SHIFT,
+		.field_width = 4,
 		.min_field_value = 2,
 		.matches = has_hw_dbm,
 		.cpu_enable = cpu_enable_hw_dbm,
@@ -2193,6 +2228,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.matches = has_cpuid_feature,
 		.sys_reg = SYS_ID_AA64ISAR0_EL1,
 		.field_pos = ID_AA64ISAR0_CRC32_SHIFT,
+		.field_width = 4,
 		.min_field_value = 1,
 	},
 	{
@@ -2202,6 +2238,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.matches = has_cpuid_feature,
 		.sys_reg = SYS_ID_AA64PFR1_EL1,
 		.field_pos = ID_AA64PFR1_SSBS_SHIFT,
+		.field_width = 4,
 		.sign = FTR_UNSIGNED,
 		.min_field_value = ID_AA64PFR1_SSBS_PSTATE_ONLY,
 	},
@@ -2214,6 +2251,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.sys_reg = SYS_ID_AA64MMFR2_EL1,
 		.sign = FTR_UNSIGNED,
 		.field_pos = ID_AA64MMFR2_CNP_SHIFT,
+		.field_width = 4,
 		.min_field_value = 1,
 		.cpu_enable = cpu_enable_cnp,
 	},
@@ -2225,27 +2263,41 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.matches = has_cpuid_feature,
 		.sys_reg = SYS_ID_AA64ISAR1_EL1,
 		.field_pos = ID_AA64ISAR1_SB_SHIFT,
+		.field_width = 4,
 		.sign = FTR_UNSIGNED,
 		.min_field_value = 1,
 	},
 #ifdef CONFIG_ARM64_PTR_AUTH
 	{
-		.desc = "Address authentication (architected algorithm)",
-		.capability = ARM64_HAS_ADDRESS_AUTH_ARCH,
+		.desc = "Address authentication (architected QARMA5 algorithm)",
+		.capability = ARM64_HAS_ADDRESS_AUTH_ARCH_QARMA5,
 		.type = ARM64_CPUCAP_BOOT_CPU_FEATURE,
 		.sys_reg = SYS_ID_AA64ISAR1_EL1,
 		.sign = FTR_UNSIGNED,
 		.field_pos = ID_AA64ISAR1_APA_SHIFT,
+		.field_width = 4,
 		.min_field_value = ID_AA64ISAR1_APA_ARCHITECTED,
 		.matches = has_address_auth_cpucap,
 	},
 	{
+		.desc = "Address authentication (architected QARMA3 algorithm)",
+		.capability = ARM64_HAS_ADDRESS_AUTH_ARCH_QARMA3,
+		.type = ARM64_CPUCAP_BOOT_CPU_FEATURE,
+		.sys_reg = SYS_ID_AA64ISAR2_EL1,
+		.sign = FTR_UNSIGNED,
+		.field_pos = ID_AA64ISAR2_APA3_SHIFT,
+		.field_width = 4,
+		.min_field_value = ID_AA64ISAR2_APA3_ARCHITECTED,
+		.matches = has_address_auth_cpucap,
+	},
+	{
 		.desc = "Address authentication (IMP DEF algorithm)",
 		.capability = ARM64_HAS_ADDRESS_AUTH_IMP_DEF,
 		.type = ARM64_CPUCAP_BOOT_CPU_FEATURE,
 		.sys_reg = SYS_ID_AA64ISAR1_EL1,
 		.sign = FTR_UNSIGNED,
 		.field_pos = ID_AA64ISAR1_API_SHIFT,
+		.field_width = 4,
 		.min_field_value = ID_AA64ISAR1_API_IMP_DEF,
 		.matches = has_address_auth_cpucap,
 	},
@@ -2255,22 +2307,35 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.matches = has_address_auth_metacap,
 	},
 	{
-		.desc = "Generic authentication (architected algorithm)",
-		.capability = ARM64_HAS_GENERIC_AUTH_ARCH,
+		.desc = "Generic authentication (architected QARMA5 algorithm)",
+		.capability = ARM64_HAS_GENERIC_AUTH_ARCH_QARMA5,
 		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
 		.sys_reg = SYS_ID_AA64ISAR1_EL1,
 		.sign = FTR_UNSIGNED,
 		.field_pos = ID_AA64ISAR1_GPA_SHIFT,
+		.field_width = 4,
 		.min_field_value = ID_AA64ISAR1_GPA_ARCHITECTED,
 		.matches = has_cpuid_feature,
 	},
 	{
+		.desc = "Generic authentication (architected QARMA3 algorithm)",
+		.capability = ARM64_HAS_GENERIC_AUTH_ARCH_QARMA3,
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.sys_reg = SYS_ID_AA64ISAR2_EL1,
+		.sign = FTR_UNSIGNED,
+		.field_pos = ID_AA64ISAR2_GPA3_SHIFT,
+		.field_width = 4,
+		.min_field_value = ID_AA64ISAR2_GPA3_ARCHITECTED,
+		.matches = has_cpuid_feature,
+	},
+	{
 		.desc = "Generic authentication (IMP DEF algorithm)",
 		.capability = ARM64_HAS_GENERIC_AUTH_IMP_DEF,
 		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
 		.sys_reg = SYS_ID_AA64ISAR1_EL1,
 		.sign = FTR_UNSIGNED,
 		.field_pos = ID_AA64ISAR1_GPI_SHIFT,
+		.field_width = 4,
 		.min_field_value = ID_AA64ISAR1_GPI_IMP_DEF,
 		.matches = has_cpuid_feature,
 	},
@@ -2291,6 +2356,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.matches = can_use_gic_priorities,
 		.sys_reg = SYS_ID_AA64PFR0_EL1,
 		.field_pos = ID_AA64PFR0_GIC_SHIFT,
+		.field_width = 4,
 		.sign = FTR_UNSIGNED,
 		.min_field_value = 1,
 	},
@@ -2302,6 +2368,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
 		.sys_reg = SYS_ID_AA64MMFR2_EL1,
 		.sign = FTR_UNSIGNED,
+		.field_width = 4,
 		.field_pos = ID_AA64MMFR2_E0PD_SHIFT,
 		.matches = has_cpuid_feature,
 		.min_field_value = 1,
@@ -2316,6 +2383,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.matches = has_cpuid_feature,
 		.sys_reg = SYS_ID_AA64ISAR0_EL1,
 		.field_pos = ID_AA64ISAR0_RNDR_SHIFT,
+		.field_width = 4,
 		.sign = FTR_UNSIGNED,
 		.min_field_value = 1,
 	},
@@ -2333,6 +2401,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.cpu_enable = bti_enable,
 		.sys_reg = SYS_ID_AA64PFR1_EL1,
 		.field_pos = ID_AA64PFR1_BT_SHIFT,
+		.field_width = 4,
 		.min_field_value = ID_AA64PFR1_BT_BTI,
 		.sign = FTR_UNSIGNED,
 	},
@@ -2345,6 +2414,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.matches = has_cpuid_feature,
 		.sys_reg = SYS_ID_AA64PFR1_EL1,
 		.field_pos = ID_AA64PFR1_MTE_SHIFT,
+		.field_width = 4,
 		.min_field_value = ID_AA64PFR1_MTE,
 		.sign = FTR_UNSIGNED,
 		.cpu_enable = cpu_enable_mte,
@@ -2356,6 +2426,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.matches = has_cpuid_feature,
 		.sys_reg = SYS_ID_AA64PFR1_EL1,
 		.field_pos = ID_AA64PFR1_MTE_SHIFT,
+		.field_width = 4,
 		.min_field_value = ID_AA64PFR1_MTE_ASYMM,
 		.sign = FTR_UNSIGNED,
 	},
@@ -2367,16 +2438,18 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.sys_reg = SYS_ID_AA64ISAR1_EL1,
 		.sign = FTR_UNSIGNED,
 		.field_pos = ID_AA64ISAR1_LRCPC_SHIFT,
+		.field_width = 4,
 		.matches = has_cpuid_feature,
 		.min_field_value = 1,
 	},
 	{},
 };
 
-#define HWCAP_CPUID_MATCH(reg, field, s, min_value)				\
+#define HWCAP_CPUID_MATCH(reg, field, width, s, min_value)			\
 		.matches = has_cpuid_feature,					\
 		.sys_reg = reg,							\
 		.field_pos = field,						\
+		.field_width = width,						\
 		.sign = s,							\
 		.min_field_value = min_value,
 
@@ -2386,10 +2459,10 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.hwcap_type = cap_type,						\
 		.hwcap = cap,							\
 
-#define HWCAP_CAP(reg, field, s, min_value, cap_type, cap)			\
+#define HWCAP_CAP(reg, field, width, s, min_value, cap_type, cap)		\
 	{									\
 		__HWCAP_CAP(#cap, cap_type, cap)				\
-		HWCAP_CPUID_MATCH(reg, field, s, min_value)			\
+		HWCAP_CPUID_MATCH(reg, field, width, s, min_value) 		\
 	}
 
 #define HWCAP_MULTI_CAP(list, cap_type, cap)					\
@@ -2409,11 +2482,16 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 static const struct arm64_cpu_capabilities ptr_auth_hwcap_addr_matches[] = {
 	{
 		HWCAP_CPUID_MATCH(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_APA_SHIFT,
-				  FTR_UNSIGNED, ID_AA64ISAR1_APA_ARCHITECTED)
+				  4, FTR_UNSIGNED,
+				  ID_AA64ISAR1_APA_ARCHITECTED)
+	},
+	{
+		HWCAP_CPUID_MATCH(SYS_ID_AA64ISAR2_EL1, ID_AA64ISAR2_APA3_SHIFT,
+				  4, FTR_UNSIGNED, ID_AA64ISAR2_APA3_ARCHITECTED)
 	},
 	{
 		HWCAP_CPUID_MATCH(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_API_SHIFT,
-				  FTR_UNSIGNED, ID_AA64ISAR1_API_IMP_DEF)
+				  4, FTR_UNSIGNED, ID_AA64ISAR1_API_IMP_DEF)
 	},
 	{},
 };
@@ -2421,77 +2499,82 @@ static const struct arm64_cpu_capabilities ptr_auth_hwcap_addr_matches[] = {
 static const struct arm64_cpu_capabilities ptr_auth_hwcap_gen_matches[] = {
 	{
 		HWCAP_CPUID_MATCH(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_GPA_SHIFT,
-				  FTR_UNSIGNED, ID_AA64ISAR1_GPA_ARCHITECTED)
+				  4, FTR_UNSIGNED, ID_AA64ISAR1_GPA_ARCHITECTED)
+	},
+	{
+		HWCAP_CPUID_MATCH(SYS_ID_AA64ISAR2_EL1, ID_AA64ISAR2_GPA3_SHIFT,
+				  4, FTR_UNSIGNED, ID_AA64ISAR2_GPA3_ARCHITECTED)
 	},
 	{
 		HWCAP_CPUID_MATCH(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_GPI_SHIFT,
-				  FTR_UNSIGNED, ID_AA64ISAR1_GPI_IMP_DEF)
+				  4, FTR_UNSIGNED, ID_AA64ISAR1_GPI_IMP_DEF)
 	},
 	{},
 };
 #endif
 
 static const struct arm64_cpu_capabilities arm64_elf_hwcaps[] = {
-	HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_AES_SHIFT, FTR_UNSIGNED, 2, CAP_HWCAP, KERNEL_HWCAP_PMULL),
-	HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_AES_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_AES),
-	HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_SHA1_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_SHA1),
-	HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_SHA2_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_SHA2),
-	HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_SHA2_SHIFT, FTR_UNSIGNED, 2, CAP_HWCAP, KERNEL_HWCAP_SHA512),
-	HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_CRC32_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_CRC32),
-	HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_ATOMICS_SHIFT, FTR_UNSIGNED, 2, CAP_HWCAP, KERNEL_HWCAP_ATOMICS),
-	HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_RDM_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_ASIMDRDM),
-	HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_SHA3_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_SHA3),
-	HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_SM3_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_SM3),
-	HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_SM4_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_SM4),
-	HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_DP_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_ASIMDDP),
-	HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_FHM_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_ASIMDFHM),
-	HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_TS_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_FLAGM),
-	HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_TS_SHIFT, FTR_UNSIGNED, 2, CAP_HWCAP, KERNEL_HWCAP_FLAGM2),
-	HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_RNDR_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_RNG),
-	HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_FP_SHIFT, FTR_SIGNED, 0, CAP_HWCAP, KERNEL_HWCAP_FP),
-	HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_FP_SHIFT, FTR_SIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_FPHP),
-	HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_ASIMD_SHIFT, FTR_SIGNED, 0, CAP_HWCAP, KERNEL_HWCAP_ASIMD),
-	HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_ASIMD_SHIFT, FTR_SIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_ASIMDHP),
-	HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_DIT_SHIFT, FTR_SIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_DIT),
-	HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_DPB_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_DCPOP),
-	HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_DPB_SHIFT, FTR_UNSIGNED, 2, CAP_HWCAP, KERNEL_HWCAP_DCPODP),
-	HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_JSCVT_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_JSCVT),
-	HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_FCMA_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_FCMA),
-	HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_LRCPC_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_LRCPC),
-	HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_LRCPC_SHIFT, FTR_UNSIGNED, 2, CAP_HWCAP, KERNEL_HWCAP_ILRCPC),
-	HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_FRINTTS_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_FRINT),
-	HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_SB_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_SB),
-	HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_BF16_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_BF16),
-	HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_DGH_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_DGH),
-	HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_I8MM_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_I8MM),
-	HWCAP_CAP(SYS_ID_AA64MMFR2_EL1, ID_AA64MMFR2_AT_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_USCAT),
+	HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_AES_SHIFT, 4, FTR_UNSIGNED, 2, CAP_HWCAP, KERNEL_HWCAP_PMULL),
+	HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_AES_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_AES),
+	HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_SHA1_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_SHA1),
+	HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_SHA2_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_SHA2),
+	HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_SHA2_SHIFT, 4, FTR_UNSIGNED, 2, CAP_HWCAP, KERNEL_HWCAP_SHA512),
+	HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_CRC32_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_CRC32),
+	HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_ATOMICS_SHIFT, 4, FTR_UNSIGNED, 2, CAP_HWCAP, KERNEL_HWCAP_ATOMICS),
+	HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_RDM_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_ASIMDRDM),
+	HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_SHA3_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_SHA3),
+	HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_SM3_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_SM3),
+	HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_SM4_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_SM4),
+	HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_DP_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_ASIMDDP),
+	HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_FHM_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_ASIMDFHM),
+	HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_TS_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_FLAGM),
+	HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_TS_SHIFT, 4, FTR_UNSIGNED, 2, CAP_HWCAP, KERNEL_HWCAP_FLAGM2),
+	HWCAP_CAP(SYS_ID_AA64ISAR0_EL1, ID_AA64ISAR0_RNDR_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_RNG),
+	HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_FP_SHIFT, 4, FTR_SIGNED, 0, CAP_HWCAP, KERNEL_HWCAP_FP),
+	HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_FP_SHIFT, 4, FTR_SIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_FPHP),
+	HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_ASIMD_SHIFT, 4, FTR_SIGNED, 0, CAP_HWCAP, KERNEL_HWCAP_ASIMD),
+	HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_ASIMD_SHIFT, 4, FTR_SIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_ASIMDHP),
+	HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_DIT_SHIFT, 4, FTR_SIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_DIT),
+	HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_DPB_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_DCPOP),
+	HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_DPB_SHIFT, 4, FTR_UNSIGNED, 2, CAP_HWCAP, KERNEL_HWCAP_DCPODP),
+	HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_JSCVT_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_JSCVT),
+	HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_FCMA_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_FCMA),
+	HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_LRCPC_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_LRCPC),
+	HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_LRCPC_SHIFT, 4, FTR_UNSIGNED, 2, CAP_HWCAP, KERNEL_HWCAP_ILRCPC),
+	HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_FRINTTS_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_FRINT),
+	HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_SB_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_SB),
+	HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_BF16_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_BF16),
+	HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_DGH_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_DGH),
+	HWCAP_CAP(SYS_ID_AA64ISAR1_EL1, ID_AA64ISAR1_I8MM_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_I8MM),
+	HWCAP_CAP(SYS_ID_AA64MMFR2_EL1, ID_AA64MMFR2_AT_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_USCAT),
 #ifdef CONFIG_ARM64_SVE
-	HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_SVE_SHIFT, FTR_UNSIGNED, ID_AA64PFR0_SVE, CAP_HWCAP, KERNEL_HWCAP_SVE),
-	HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_SVEVER_SHIFT, FTR_UNSIGNED, ID_AA64ZFR0_SVEVER_SVE2, CAP_HWCAP, KERNEL_HWCAP_SVE2),
-	HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_AES_SHIFT, FTR_UNSIGNED, ID_AA64ZFR0_AES, CAP_HWCAP, KERNEL_HWCAP_SVEAES),
-	HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_AES_SHIFT, FTR_UNSIGNED, ID_AA64ZFR0_AES_PMULL, CAP_HWCAP, KERNEL_HWCAP_SVEPMULL),
-	HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_BITPERM_SHIFT, FTR_UNSIGNED, ID_AA64ZFR0_BITPERM, CAP_HWCAP, KERNEL_HWCAP_SVEBITPERM),
-	HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_BF16_SHIFT, FTR_UNSIGNED, ID_AA64ZFR0_BF16, CAP_HWCAP, KERNEL_HWCAP_SVEBF16),
-	HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_SHA3_SHIFT, FTR_UNSIGNED, ID_AA64ZFR0_SHA3, CAP_HWCAP, KERNEL_HWCAP_SVESHA3),
-	HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_SM4_SHIFT, FTR_UNSIGNED, ID_AA64ZFR0_SM4, CAP_HWCAP, KERNEL_HWCAP_SVESM4),
-	HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_I8MM_SHIFT, FTR_UNSIGNED, ID_AA64ZFR0_I8MM, CAP_HWCAP, KERNEL_HWCAP_SVEI8MM),
-	HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_F32MM_SHIFT, FTR_UNSIGNED, ID_AA64ZFR0_F32MM, CAP_HWCAP, KERNEL_HWCAP_SVEF32MM),
-	HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_F64MM_SHIFT, FTR_UNSIGNED, ID_AA64ZFR0_F64MM, CAP_HWCAP, KERNEL_HWCAP_SVEF64MM),
+	HWCAP_CAP(SYS_ID_AA64PFR0_EL1, ID_AA64PFR0_SVE_SHIFT, 4, FTR_UNSIGNED, ID_AA64PFR0_SVE, CAP_HWCAP, KERNEL_HWCAP_SVE),
+	HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_SVEVER_SHIFT, 4, FTR_UNSIGNED, ID_AA64ZFR0_SVEVER_SVE2, CAP_HWCAP, KERNEL_HWCAP_SVE2),
+	HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_AES_SHIFT, 4, FTR_UNSIGNED, ID_AA64ZFR0_AES, CAP_HWCAP, KERNEL_HWCAP_SVEAES),
+	HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_AES_SHIFT, 4, FTR_UNSIGNED, ID_AA64ZFR0_AES_PMULL, CAP_HWCAP, KERNEL_HWCAP_SVEPMULL),
+	HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_BITPERM_SHIFT, 4, FTR_UNSIGNED, ID_AA64ZFR0_BITPERM, CAP_HWCAP, KERNEL_HWCAP_SVEBITPERM),
+	HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_BF16_SHIFT, 4, FTR_UNSIGNED, ID_AA64ZFR0_BF16, CAP_HWCAP, KERNEL_HWCAP_SVEBF16),
+	HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_SHA3_SHIFT, 4, FTR_UNSIGNED, ID_AA64ZFR0_SHA3, CAP_HWCAP, KERNEL_HWCAP_SVESHA3),
+	HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_SM4_SHIFT, 4, FTR_UNSIGNED, ID_AA64ZFR0_SM4, CAP_HWCAP, KERNEL_HWCAP_SVESM4),
+	HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_I8MM_SHIFT, 4, FTR_UNSIGNED, ID_AA64ZFR0_I8MM, CAP_HWCAP, KERNEL_HWCAP_SVEI8MM),
+	HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_F32MM_SHIFT, 4, FTR_UNSIGNED, ID_AA64ZFR0_F32MM, CAP_HWCAP, KERNEL_HWCAP_SVEF32MM),
+	HWCAP_CAP(SYS_ID_AA64ZFR0_EL1, ID_AA64ZFR0_F64MM_SHIFT, 4, FTR_UNSIGNED, ID_AA64ZFR0_F64MM, CAP_HWCAP, KERNEL_HWCAP_SVEF64MM),
 #endif
-	HWCAP_CAP(SYS_ID_AA64PFR1_EL1, ID_AA64PFR1_SSBS_SHIFT, FTR_UNSIGNED, ID_AA64PFR1_SSBS_PSTATE_INSNS, CAP_HWCAP, KERNEL_HWCAP_SSBS),
+	HWCAP_CAP(SYS_ID_AA64PFR1_EL1, ID_AA64PFR1_SSBS_SHIFT, 4, FTR_UNSIGNED, ID_AA64PFR1_SSBS_PSTATE_INSNS, CAP_HWCAP, KERNEL_HWCAP_SSBS),
 #ifdef CONFIG_ARM64_BTI
-	HWCAP_CAP(SYS_ID_AA64PFR1_EL1, ID_AA64PFR1_BT_SHIFT, FTR_UNSIGNED, ID_AA64PFR1_BT_BTI, CAP_HWCAP, KERNEL_HWCAP_BTI),
+	HWCAP_CAP(SYS_ID_AA64PFR1_EL1, ID_AA64PFR1_BT_SHIFT, 4, FTR_UNSIGNED, ID_AA64PFR1_BT_BTI, CAP_HWCAP, KERNEL_HWCAP_BTI),
 #endif
 #ifdef CONFIG_ARM64_PTR_AUTH
 	HWCAP_MULTI_CAP(ptr_auth_hwcap_addr_matches, CAP_HWCAP, KERNEL_HWCAP_PACA),
 	HWCAP_MULTI_CAP(ptr_auth_hwcap_gen_matches, CAP_HWCAP, KERNEL_HWCAP_PACG),
 #endif
 #ifdef CONFIG_ARM64_MTE
-	HWCAP_CAP(SYS_ID_AA64PFR1_EL1, ID_AA64PFR1_MTE_SHIFT, FTR_UNSIGNED, ID_AA64PFR1_MTE, CAP_HWCAP, KERNEL_HWCAP_MTE),
+	HWCAP_CAP(SYS_ID_AA64PFR1_EL1, ID_AA64PFR1_MTE_SHIFT, 4, FTR_UNSIGNED, ID_AA64PFR1_MTE, CAP_HWCAP, KERNEL_HWCAP_MTE),
+	HWCAP_CAP(SYS_ID_AA64PFR1_EL1, ID_AA64PFR1_MTE_SHIFT, 4, FTR_UNSIGNED, ID_AA64PFR1_MTE_ASYMM, CAP_HWCAP, KERNEL_HWCAP_MTE3),
 #endif /* CONFIG_ARM64_MTE */
-	HWCAP_CAP(SYS_ID_AA64MMFR0_EL1, ID_AA64MMFR0_ECV_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_ECV),
-	HWCAP_CAP(SYS_ID_AA64MMFR1_EL1, ID_AA64MMFR1_AFP_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_AFP),
-	HWCAP_CAP(SYS_ID_AA64ISAR2_EL1, ID_AA64ISAR2_RPRES_SHIFT, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_RPRES),
+	HWCAP_CAP(SYS_ID_AA64MMFR0_EL1, ID_AA64MMFR0_ECV_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_ECV),
+	HWCAP_CAP(SYS_ID_AA64MMFR1_EL1, ID_AA64MMFR1_AFP_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_AFP),
+	HWCAP_CAP(SYS_ID_AA64ISAR2_EL1, ID_AA64ISAR2_RPRES_SHIFT, 4, FTR_UNSIGNED, 1, CAP_HWCAP, KERNEL_HWCAP_RPRES),
 	{},
 };
 
@@ -2520,15 +2603,15 @@ static bool compat_has_neon(const struct arm64_cpu_capabilities *cap, int scope)
 static const struct arm64_cpu_capabilities compat_elf_hwcaps[] = {
 #ifdef CONFIG_COMPAT
 	HWCAP_CAP_MATCH(compat_has_neon, CAP_COMPAT_HWCAP, COMPAT_HWCAP_NEON),
-	HWCAP_CAP(SYS_MVFR1_EL1, MVFR1_SIMDFMAC_SHIFT, FTR_UNSIGNED, 1, CAP_COMPAT_HWCAP, COMPAT_HWCAP_VFPv4),
+	HWCAP_CAP(SYS_MVFR1_EL1, MVFR1_SIMDFMAC_SHIFT, 4, FTR_UNSIGNED, 1, CAP_COMPAT_HWCAP, COMPAT_HWCAP_VFPv4),
 	/* Arm v8 mandates MVFR0.FPDP == {0, 2}. So, piggy back on this for the presence of VFP support */
-	HWCAP_CAP(SYS_MVFR0_EL1, MVFR0_FPDP_SHIFT, FTR_UNSIGNED, 2, CAP_COMPAT_HWCAP, COMPAT_HWCAP_VFP),
-	HWCAP_CAP(SYS_MVFR0_EL1, MVFR0_FPDP_SHIFT, FTR_UNSIGNED, 2, CAP_COMPAT_HWCAP, COMPAT_HWCAP_VFPv3),
-	HWCAP_CAP(SYS_ID_ISAR5_EL1, ID_ISAR5_AES_SHIFT, FTR_UNSIGNED, 2, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_PMULL),
-	HWCAP_CAP(SYS_ID_ISAR5_EL1, ID_ISAR5_AES_SHIFT, FTR_UNSIGNED, 1, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_AES),
-	HWCAP_CAP(SYS_ID_ISAR5_EL1, ID_ISAR5_SHA1_SHIFT, FTR_UNSIGNED, 1, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_SHA1),
-	HWCAP_CAP(SYS_ID_ISAR5_EL1, ID_ISAR5_SHA2_SHIFT, FTR_UNSIGNED, 1, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_SHA2),
-	HWCAP_CAP(SYS_ID_ISAR5_EL1, ID_ISAR5_CRC32_SHIFT, FTR_UNSIGNED, 1, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_CRC32),
+	HWCAP_CAP(SYS_MVFR0_EL1, MVFR0_FPDP_SHIFT, 4, FTR_UNSIGNED, 2, CAP_COMPAT_HWCAP, COMPAT_HWCAP_VFP),
+	HWCAP_CAP(SYS_MVFR0_EL1, MVFR0_FPDP_SHIFT, 4, FTR_UNSIGNED, 2, CAP_COMPAT_HWCAP, COMPAT_HWCAP_VFPv3),
+	HWCAP_CAP(SYS_ID_ISAR5_EL1, ID_ISAR5_AES_SHIFT, 4, FTR_UNSIGNED, 2, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_PMULL),
+	HWCAP_CAP(SYS_ID_ISAR5_EL1, ID_ISAR5_AES_SHIFT, 4, FTR_UNSIGNED, 1, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_AES),
+	HWCAP_CAP(SYS_ID_ISAR5_EL1, ID_ISAR5_SHA1_SHIFT, 4, FTR_UNSIGNED, 1, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_SHA1),
+	HWCAP_CAP(SYS_ID_ISAR5_EL1, ID_ISAR5_SHA2_SHIFT, 4, FTR_UNSIGNED, 1, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_SHA2),
+	HWCAP_CAP(SYS_ID_ISAR5_EL1, ID_ISAR5_CRC32_SHIFT, 4, FTR_UNSIGNED, 1, CAP_COMPAT_HWCAP2, COMPAT_HWCAP2_CRC32),
 #endif
 	{},
 };
diff --git a/arch/arm64/kernel/cpuidle.c b/arch/arm64/kernel/cpuidle.c
index 03991eeff643..3006f4324808 100644
--- a/arch/arm64/kernel/cpuidle.c
+++ b/arch/arm64/kernel/cpuidle.c
@@ -54,6 +54,9 @@ static int psci_acpi_cpu_init_idle(unsigned int cpu)
 	struct acpi_lpi_state *lpi;
 	struct acpi_processor *pr = per_cpu(processors, cpu);
 
+	if (unlikely(!pr || !pr->flags.has_lpi))
+		return -EINVAL;
+
 	/*
 	 * If the PSCI cpu_suspend function hook has not been initialized
 	 * idle states must not be enabled, so bail out
@@ -61,9 +64,6 @@ static int psci_acpi_cpu_init_idle(unsigned int cpu)
 	if (!psci_ops.cpu_suspend)
 		return -EOPNOTSUPP;
 
-	if (unlikely(!pr || !pr->flags.has_lpi))
-		return -EINVAL;
-
 	count = pr->power.count - 1;
 	if (count <= 0)
 		return -ENODEV;
diff --git a/arch/arm64/kernel/cpuinfo.c b/arch/arm64/kernel/cpuinfo.c
index 591c18a889a5..330b92ea863a 100644
--- a/arch/arm64/kernel/cpuinfo.c
+++ b/arch/arm64/kernel/cpuinfo.c
@@ -97,6 +97,7 @@ static const char *const hwcap_str[] = {
 	[KERNEL_HWCAP_ECV]		= "ecv",
 	[KERNEL_HWCAP_AFP]		= "afp",
 	[KERNEL_HWCAP_RPRES]		= "rpres",
+	[KERNEL_HWCAP_MTE3]		= "mte3",
 };
 
 #ifdef CONFIG_COMPAT
diff --git a/arch/arm64/kernel/crash_core.c b/arch/arm64/kernel/crash_core.c
index 314391a156ee..2b65aae332ce 100644
--- a/arch/arm64/kernel/crash_core.c
+++ b/arch/arm64/kernel/crash_core.c
@@ -20,6 +20,12 @@ void arch_crash_save_vmcoreinfo(void)
 {
 	VMCOREINFO_NUMBER(VA_BITS);
 	/* Please note VMCOREINFO_NUMBER() uses "%d", not "%x" */
+	vmcoreinfo_append_str("NUMBER(MODULES_VADDR)=0x%lx\n", MODULES_VADDR);
+	vmcoreinfo_append_str("NUMBER(MODULES_END)=0x%lx\n", MODULES_END);
+	vmcoreinfo_append_str("NUMBER(VMALLOC_START)=0x%lx\n", VMALLOC_START);
+	vmcoreinfo_append_str("NUMBER(VMALLOC_END)=0x%lx\n", VMALLOC_END);
+	vmcoreinfo_append_str("NUMBER(VMEMMAP_START)=0x%lx\n", VMEMMAP_START);
+	vmcoreinfo_append_str("NUMBER(VMEMMAP_END)=0x%lx\n", VMEMMAP_END);
 	vmcoreinfo_append_str("NUMBER(kimage_voffset)=0x%llx\n",
 						kimage_voffset);
 	vmcoreinfo_append_str("NUMBER(PHYS_OFFSET)=0x%llx\n",
diff --git a/arch/arm64/kernel/elfcore.c b/arch/arm64/kernel/elfcore.c
new file mode 100644
index 000000000000..3ed39c61a510
--- /dev/null
+++ b/arch/arm64/kernel/elfcore.c
@@ -0,0 +1,134 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/coredump.h>
+#include <linux/elfcore.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+
+#include <asm/cpufeature.h>
+#include <asm/mte.h>
+
+#ifndef VMA_ITERATOR
+#define VMA_ITERATOR(name, mm, addr)	\
+	struct mm_struct *name = mm
+#define for_each_vma(vmi, vma)		\
+	for (vma = vmi->mmap; vma; vma = vma->vm_next)
+#endif
+
+#define for_each_mte_vma(vmi, vma)					\
+	if (system_supports_mte())					\
+		for_each_vma(vmi, vma)					\
+			if (vma->vm_flags & VM_MTE)
+
+static unsigned long mte_vma_tag_dump_size(struct vm_area_struct *vma)
+{
+	if (vma->vm_flags & VM_DONTDUMP)
+		return 0;
+
+	return vma_pages(vma) * MTE_PAGE_TAG_STORAGE;
+}
+
+/* Derived from dump_user_range(); start/end must be page-aligned */
+static int mte_dump_tag_range(struct coredump_params *cprm,
+			      unsigned long start, unsigned long end)
+{
+	unsigned long addr;
+
+	for (addr = start; addr < end; addr += PAGE_SIZE) {
+		char tags[MTE_PAGE_TAG_STORAGE];
+		struct page *page = get_dump_page(addr);
+
+		/*
+		 * get_dump_page() returns NULL when encountering an empty
+		 * page table entry that would otherwise have been filled with
+		 * the zero page. Skip the equivalent tag dump which would
+		 * have been all zeros.
+		 */
+		if (!page) {
+			dump_skip(cprm, MTE_PAGE_TAG_STORAGE);
+			continue;
+		}
+
+		/*
+		 * Pages mapped in user space as !pte_access_permitted() (e.g.
+		 * PROT_EXEC only) may not have the PG_mte_tagged flag set.
+		 */
+		if (!test_bit(PG_mte_tagged, &page->flags)) {
+			put_page(page);
+			dump_skip(cprm, MTE_PAGE_TAG_STORAGE);
+			continue;
+		}
+
+		mte_save_page_tags(page_address(page), tags);
+		put_page(page);
+		if (!dump_emit(cprm, tags, MTE_PAGE_TAG_STORAGE))
+			return 0;
+	}
+
+	return 1;
+}
+
+Elf_Half elf_core_extra_phdrs(void)
+{
+	struct vm_area_struct *vma;
+	int vma_count = 0;
+	VMA_ITERATOR(vmi, current->mm, 0);
+
+	for_each_mte_vma(vmi, vma)
+		vma_count++;
+
+	return vma_count;
+}
+
+int elf_core_write_extra_phdrs(struct coredump_params *cprm, loff_t offset)
+{
+	struct vm_area_struct *vma;
+	VMA_ITERATOR(vmi, current->mm, 0);
+
+	for_each_mte_vma(vmi, vma) {
+		struct elf_phdr phdr;
+
+		phdr.p_type = PT_ARM_MEMTAG_MTE;
+		phdr.p_offset = offset;
+		phdr.p_vaddr = vma->vm_start;
+		phdr.p_paddr = 0;
+		phdr.p_filesz = mte_vma_tag_dump_size(vma);
+		phdr.p_memsz = vma->vm_end - vma->vm_start;
+		offset += phdr.p_filesz;
+		phdr.p_flags = 0;
+		phdr.p_align = 0;
+
+		if (!dump_emit(cprm, &phdr, sizeof(phdr)))
+			return 0;
+	}
+
+	return 1;
+}
+
+size_t elf_core_extra_data_size(void)
+{
+	struct vm_area_struct *vma;
+	size_t data_size = 0;
+	VMA_ITERATOR(vmi, current->mm, 0);
+
+	for_each_mte_vma(vmi, vma)
+		data_size += mte_vma_tag_dump_size(vma);
+
+	return data_size;
+}
+
+int elf_core_write_extra_data(struct coredump_params *cprm)
+{
+	struct vm_area_struct *vma;
+	VMA_ITERATOR(vmi, current->mm, 0);
+
+	for_each_mte_vma(vmi, vma) {
+		if (vma->vm_flags & VM_DONTDUMP)
+			continue;
+
+		if (!mte_dump_tag_range(cprm, vma->vm_start, vma->vm_end))
+			return 0;
+	}
+
+	return 1;
+}
diff --git a/arch/arm64/kernel/entry-common.c b/arch/arm64/kernel/entry-common.c
index ef7fcefb96bd..878c65aa7206 100644
--- a/arch/arm64/kernel/entry-common.c
+++ b/arch/arm64/kernel/entry-common.c
@@ -6,6 +6,7 @@
  */
 
 #include <linux/context_tracking.h>
+#include <linux/kasan.h>
 #include <linux/linkage.h>
 #include <linux/lockdep.h>
 #include <linux/ptrace.h>
@@ -56,6 +57,7 @@ static void noinstr enter_from_kernel_mode(struct pt_regs *regs)
 {
 	__enter_from_kernel_mode(regs);
 	mte_check_tfsr_entry();
+	mte_disable_tco_entry(current);
 }
 
 /*
@@ -103,6 +105,7 @@ static __always_inline void __enter_from_user_mode(void)
 	CT_WARN_ON(ct_state() != CONTEXT_USER);
 	user_exit_irqoff();
 	trace_hardirqs_off_finish();
+	mte_disable_tco_entry(current);
 }
 
 static __always_inline void enter_from_user_mode(struct pt_regs *regs)
@@ -220,9 +223,26 @@ static void noinstr arm64_exit_el1_dbg(struct pt_regs *regs)
 		lockdep_hardirqs_on(CALLER_ADDR0);
 }
 
+#ifdef CONFIG_PREEMPT_DYNAMIC
+DEFINE_STATIC_KEY_TRUE(sk_dynamic_irqentry_exit_cond_resched);
+#define need_irq_preemption() \
+	(static_branch_unlikely(&sk_dynamic_irqentry_exit_cond_resched))
+#else
+#define need_irq_preemption()	(IS_ENABLED(CONFIG_PREEMPTION))
+#endif
+
 static void __sched arm64_preempt_schedule_irq(void)
 {
-	lockdep_assert_irqs_disabled();
+	if (!need_irq_preemption())
+		return;
+
+	/*
+	 * Note: thread_info::preempt_count includes both thread_info::count
+	 * and thread_info::need_resched, and is not equivalent to
+	 * preempt_count().
+	 */
+	if (READ_ONCE(current_thread_info()->preempt_count) != 0)
+		return;
 
 	/*
 	 * DAIF.DA are cleared at the start of IRQ/FIQ handling, and when GIC
@@ -438,14 +458,7 @@ static __always_inline void __el1_irq(struct pt_regs *regs,
 	do_interrupt_handler(regs, handler);
 	irq_exit_rcu();
 
-	/*
-	 * Note: thread_info::preempt_count includes both thread_info::count
-	 * and thread_info::need_resched, and is not equivalent to
-	 * preempt_count().
-	 */
-	if (IS_ENABLED(CONFIG_PREEMPTION) &&
-	    READ_ONCE(current_thread_info()->preempt_count) == 0)
-		arm64_preempt_schedule_irq();
+	arm64_preempt_schedule_irq();
 
 	exit_to_kernel_mode(regs);
 }
diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index 772ec2ecf488..ede028dee81b 100644
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -37,18 +37,21 @@
 
 	.macro kernel_ventry, el:req, ht:req, regsize:req, label:req
 	.align 7
-#ifdef CONFIG_UNMAP_KERNEL_AT_EL0
+.Lventry_start\@:
 	.if	\el == 0
-alternative_if ARM64_UNMAP_KERNEL_AT_EL0
+	/*
+	 * This must be the first instruction of the EL0 vector entries. It is
+	 * skipped by the trampoline vectors, to trigger the cleanup.
+	 */
+	b	.Lskip_tramp_vectors_cleanup\@
 	.if	\regsize == 64
 	mrs	x30, tpidrro_el0
 	msr	tpidrro_el0, xzr
 	.else
 	mov	x30, xzr
 	.endif
-alternative_else_nop_endif
+.Lskip_tramp_vectors_cleanup\@:
 	.endif
-#endif
 
 	sub	sp, sp, #PT_REGS_SIZE
 #ifdef CONFIG_VMAP_STACK
@@ -95,11 +98,15 @@ alternative_else_nop_endif
 	mrs	x0, tpidrro_el0
 #endif
 	b	el\el\ht\()_\regsize\()_\label
+.org .Lventry_start\@ + 128	// Did we overflow the ventry slot?
 	.endm
 
-	.macro tramp_alias, dst, sym
+	.macro tramp_alias, dst, sym, tmp
 	mov_q	\dst, TRAMP_VALIAS
-	add	\dst, \dst, #(\sym - .entry.tramp.text)
+	adr_l	\tmp, \sym
+	add	\dst, \dst, \tmp
+	adr_l	\tmp, .entry.tramp.text
+	sub	\dst, \dst, \tmp
 	.endm
 
 	/*
@@ -116,7 +123,7 @@ alternative_cb_end
 	tbnz	\tmp2, #TIF_SSBD, .L__asm_ssbd_skip\@
 	mov	w0, #ARM_SMCCC_ARCH_WORKAROUND_2
 	mov	w1, #\state
-alternative_cb	spectre_v4_patch_fw_mitigation_conduit
+alternative_cb	smccc_patch_fw_mitigation_conduit
 	nop					// Patched to SMC/HVC #0
 alternative_cb_end
 .L__asm_ssbd_skip\@:
@@ -300,6 +307,7 @@ alternative_else_nop_endif
 	str	w21, [sp, #S_SYSCALLNO]
 	.endif
 
+#ifdef CONFIG_ARM64_PSEUDO_NMI
 	/* Save pmr */
 alternative_if ARM64_HAS_IRQ_PRIO_MASKING
 	mrs_s	x20, SYS_ICC_PMR_EL1
@@ -307,12 +315,6 @@ alternative_if ARM64_HAS_IRQ_PRIO_MASKING
 	mov	x20, #GIC_PRIO_IRQON | GIC_PRIO_PSR_I_SET
 	msr_s	SYS_ICC_PMR_EL1, x20
 alternative_else_nop_endif
-
-	/* Re-enable tag checking (TCO set on exception entry) */
-#ifdef CONFIG_ARM64_MTE
-alternative_if ARM64_MTE
-	SET_PSTATE_TCO(0)
-alternative_else_nop_endif
 #endif
 
 	/*
@@ -330,6 +332,7 @@ alternative_else_nop_endif
 	disable_daif
 	.endif
 
+#ifdef CONFIG_ARM64_PSEUDO_NMI
 	/* Restore pmr */
 alternative_if ARM64_HAS_IRQ_PRIO_MASKING
 	ldr	x20, [sp, #S_PMR_SAVE]
@@ -339,6 +342,7 @@ alternative_if ARM64_HAS_IRQ_PRIO_MASKING
 	dsb	sy				// Ensure priority change is seen by redistributor
 .L__skip_pmr_sync\@:
 alternative_else_nop_endif
+#endif
 
 	ldp	x21, x22, [sp, #S_PC]		// load ELR, SPSR
 
@@ -413,21 +417,26 @@ alternative_else_nop_endif
 	ldp	x24, x25, [sp, #16 * 12]
 	ldp	x26, x27, [sp, #16 * 13]
 	ldp	x28, x29, [sp, #16 * 14]
-	ldr	lr, [sp, #S_LR]
-	add	sp, sp, #PT_REGS_SIZE		// restore sp
 
 	.if	\el == 0
-alternative_insn eret, nop, ARM64_UNMAP_KERNEL_AT_EL0
+alternative_if_not ARM64_UNMAP_KERNEL_AT_EL0
+	ldr	lr, [sp, #S_LR]
+	add	sp, sp, #PT_REGS_SIZE		// restore sp
+	eret
+alternative_else_nop_endif
 #ifdef CONFIG_UNMAP_KERNEL_AT_EL0
 	bne	4f
-	msr	far_el1, x30
-	tramp_alias	x30, tramp_exit_native
+	msr	far_el1, x29
+	tramp_alias	x30, tramp_exit_native, x29
 	br	x30
 4:
-	tramp_alias	x30, tramp_exit_compat
+	tramp_alias	x30, tramp_exit_compat, x29
 	br	x30
 #endif
 	.else
+	ldr	lr, [sp, #S_LR]
+	add	sp, sp, #PT_REGS_SIZE		// restore sp
+
 	/* Ensure any device/NC reads complete */
 	alternative_insn nop, "dmb sy", ARM64_WORKAROUND_1508412
 
@@ -594,12 +603,6 @@ SYM_CODE_END(ret_to_user)
 
 	.popsection				// .entry.text
 
-#ifdef CONFIG_UNMAP_KERNEL_AT_EL0
-/*
- * Exception vectors trampoline.
- */
-	.pushsection ".entry.tramp.text", "ax"
-
 	// Move from tramp_pg_dir to swapper_pg_dir
 	.macro tramp_map_kernel, tmp
 	mrs	\tmp, ttbr1_el1
@@ -633,12 +636,47 @@ alternative_else_nop_endif
 	 */
 	.endm
 
-	.macro tramp_ventry, regsize = 64
+	.macro tramp_data_page	dst
+	adr_l	\dst, .entry.tramp.text
+	sub	\dst, \dst, PAGE_SIZE
+	.endm
+
+	.macro tramp_data_read_var	dst, var
+#ifdef CONFIG_RANDOMIZE_BASE
+	tramp_data_page		\dst
+	add	\dst, \dst, #:lo12:__entry_tramp_data_\var
+	ldr	\dst, [\dst]
+#else
+	ldr	\dst, =\var
+#endif
+	.endm
+
+#define BHB_MITIGATION_NONE	0
+#define BHB_MITIGATION_LOOP	1
+#define BHB_MITIGATION_FW	2
+#define BHB_MITIGATION_INSN	3
+
+	.macro tramp_ventry, vector_start, regsize, kpti, bhb
 	.align	7
 1:
 	.if	\regsize == 64
 	msr	tpidrro_el0, x30	// Restored in kernel_ventry
 	.endif
+
+	.if	\bhb == BHB_MITIGATION_LOOP
+	/*
+	 * This sequence must appear before the first indirect branch. i.e. the
+	 * ret out of tramp_ventry. It appears here because x30 is free.
+	 */
+	__mitigate_spectre_bhb_loop	x30
+	.endif // \bhb == BHB_MITIGATION_LOOP
+
+	.if	\bhb == BHB_MITIGATION_INSN
+	clearbhb
+	isb
+	.endif // \bhb == BHB_MITIGATION_INSN
+
+	.if	\kpti == 1
 	/*
 	 * Defend against branch aliasing attacks by pushing a dummy
 	 * entry onto the return stack and using a RET instruction to
@@ -648,46 +686,75 @@ alternative_else_nop_endif
 	b	.
 2:
 	tramp_map_kernel	x30
-#ifdef CONFIG_RANDOMIZE_BASE
-	adr	x30, tramp_vectors + PAGE_SIZE
 alternative_insn isb, nop, ARM64_WORKAROUND_QCOM_FALKOR_E1003
-	ldr	x30, [x30]
-#else
-	ldr	x30, =vectors
-#endif
+	tramp_data_read_var	x30, vectors
 alternative_if_not ARM64_WORKAROUND_CAVIUM_TX2_219_PRFM
-	prfm	plil1strm, [x30, #(1b - tramp_vectors)]
+	prfm	plil1strm, [x30, #(1b - \vector_start)]
 alternative_else_nop_endif
+
 	msr	vbar_el1, x30
-	add	x30, x30, #(1b - tramp_vectors)
 	isb
+	.else
+	ldr	x30, =vectors
+	.endif // \kpti == 1
+
+	.if	\bhb == BHB_MITIGATION_FW
+	/*
+	 * The firmware sequence must appear before the first indirect branch.
+	 * i.e. the ret out of tramp_ventry. But it also needs the stack to be
+	 * mapped to save/restore the registers the SMC clobbers.
+	 */
+	__mitigate_spectre_bhb_fw
+	.endif // \bhb == BHB_MITIGATION_FW
+
+	add	x30, x30, #(1b - \vector_start + 4)
 	ret
+.org 1b + 128	// Did we overflow the ventry slot?
 	.endm
 
 	.macro tramp_exit, regsize = 64
-	adr	x30, tramp_vectors
+	tramp_data_read_var	x30, this_cpu_vector
+	get_this_cpu_offset x29
+	ldr	x30, [x30, x29]
+
 	msr	vbar_el1, x30
-	tramp_unmap_kernel	x30
+	ldr	lr, [sp, #S_LR]
+	tramp_unmap_kernel	x29
 	.if	\regsize == 64
-	mrs	x30, far_el1
+	mrs	x29, far_el1
 	.endif
+	add	sp, sp, #PT_REGS_SIZE		// restore sp
 	eret
 	sb
 	.endm
 
-	.align	11
-SYM_CODE_START_NOALIGN(tramp_vectors)
+	.macro	generate_tramp_vector,	kpti, bhb
+.Lvector_start\@:
 	.space	0x400
 
-	tramp_ventry
-	tramp_ventry
-	tramp_ventry
-	tramp_ventry
+	.rept	4
+	tramp_ventry	.Lvector_start\@, 64, \kpti, \bhb
+	.endr
+	.rept	4
+	tramp_ventry	.Lvector_start\@, 32, \kpti, \bhb
+	.endr
+	.endm
 
-	tramp_ventry	32
-	tramp_ventry	32
-	tramp_ventry	32
-	tramp_ventry	32
+#ifdef CONFIG_UNMAP_KERNEL_AT_EL0
+/*
+ * Exception vectors trampoline.
+ * The order must match __bp_harden_el1_vectors and the
+ * arm64_bp_harden_el1_vectors enum.
+ */
+	.pushsection ".entry.tramp.text", "ax"
+	.align	11
+SYM_CODE_START_NOALIGN(tramp_vectors)
+#ifdef CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY
+	generate_tramp_vector	kpti=1, bhb=BHB_MITIGATION_LOOP
+	generate_tramp_vector	kpti=1, bhb=BHB_MITIGATION_FW
+	generate_tramp_vector	kpti=1, bhb=BHB_MITIGATION_INSN
+#endif /* CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY */
+	generate_tramp_vector	kpti=1, bhb=BHB_MITIGATION_NONE
 SYM_CODE_END(tramp_vectors)
 
 SYM_CODE_START(tramp_exit_native)
@@ -704,13 +771,57 @@ SYM_CODE_END(tramp_exit_compat)
 	.pushsection ".rodata", "a"
 	.align PAGE_SHIFT
 SYM_DATA_START(__entry_tramp_data_start)
+__entry_tramp_data_vectors:
 	.quad	vectors
+#ifdef CONFIG_ARM_SDE_INTERFACE
+__entry_tramp_data___sdei_asm_handler:
+	.quad	__sdei_asm_handler
+#endif /* CONFIG_ARM_SDE_INTERFACE */
+__entry_tramp_data_this_cpu_vector:
+	.quad	this_cpu_vector
 SYM_DATA_END(__entry_tramp_data_start)
 	.popsection				// .rodata
 #endif /* CONFIG_RANDOMIZE_BASE */
 #endif /* CONFIG_UNMAP_KERNEL_AT_EL0 */
 
 /*
+ * Exception vectors for spectre mitigations on entry from EL1 when
+ * kpti is not in use.
+ */
+	.macro generate_el1_vector, bhb
+.Lvector_start\@:
+	kernel_ventry	1, t, 64, sync		// Synchronous EL1t
+	kernel_ventry	1, t, 64, irq		// IRQ EL1t
+	kernel_ventry	1, t, 64, fiq		// FIQ EL1h
+	kernel_ventry	1, t, 64, error		// Error EL1t
+
+	kernel_ventry	1, h, 64, sync		// Synchronous EL1h
+	kernel_ventry	1, h, 64, irq		// IRQ EL1h
+	kernel_ventry	1, h, 64, fiq		// FIQ EL1h
+	kernel_ventry	1, h, 64, error		// Error EL1h
+
+	.rept	4
+	tramp_ventry	.Lvector_start\@, 64, 0, \bhb
+	.endr
+	.rept 4
+	tramp_ventry	.Lvector_start\@, 32, 0, \bhb
+	.endr
+	.endm
+
+/* The order must match tramp_vecs and the arm64_bp_harden_el1_vectors enum. */
+	.pushsection ".entry.text", "ax"
+	.align	11
+SYM_CODE_START(__bp_harden_el1_vectors)
+#ifdef CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY
+	generate_el1_vector	bhb=BHB_MITIGATION_LOOP
+	generate_el1_vector	bhb=BHB_MITIGATION_FW
+	generate_el1_vector	bhb=BHB_MITIGATION_INSN
+#endif /* CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY */
+SYM_CODE_END(__bp_harden_el1_vectors)
+	.popsection
+
+
+/*
  * Register switch for AArch64. The callee-saved registers need to be saved
  * and restored. On entry:
  *   x0 = previous task_struct (must be preserved across the switch)
@@ -835,14 +946,7 @@ SYM_CODE_START(__sdei_asm_entry_trampoline)
 	 * Remember whether to unmap the kernel on exit.
 	 */
 1:	str	x4, [x1, #(SDEI_EVENT_INTREGS + S_SDEI_TTBR1)]
-
-#ifdef CONFIG_RANDOMIZE_BASE
-	adr	x4, tramp_vectors + PAGE_SIZE
-	add	x4, x4, #:lo12:__sdei_asm_trampoline_next_handler
-	ldr	x4, [x4]
-#else
-	ldr	x4, =__sdei_asm_handler
-#endif
+	tramp_data_read_var     x4, __sdei_asm_handler
 	br	x4
 SYM_CODE_END(__sdei_asm_entry_trampoline)
 NOKPROBE(__sdei_asm_entry_trampoline)
@@ -865,13 +969,6 @@ SYM_CODE_END(__sdei_asm_exit_trampoline)
 NOKPROBE(__sdei_asm_exit_trampoline)
 	.ltorg
 .popsection		// .entry.tramp.text
-#ifdef CONFIG_RANDOMIZE_BASE
-.pushsection ".rodata", "a"
-SYM_DATA_START(__sdei_asm_trampoline_next_handler)
-	.quad	__sdei_asm_handler
-SYM_DATA_END(__sdei_asm_trampoline_next_handler)
-.popsection		// .rodata
-#endif /* CONFIG_RANDOMIZE_BASE */
 #endif /* CONFIG_UNMAP_KERNEL_AT_EL0 */
 
 /*
@@ -981,7 +1078,7 @@ alternative_if_not ARM64_UNMAP_KERNEL_AT_EL0
 alternative_else_nop_endif
 
 #ifdef CONFIG_UNMAP_KERNEL_AT_EL0
-	tramp_alias	dst=x5, sym=__sdei_asm_exit_trampoline
+	tramp_alias	dst=x5, sym=__sdei_asm_exit_trampoline, tmp=x3
 	br	x5
 #endif
 SYM_CODE_END(__sdei_asm_handler)
diff --git a/arch/arm64/kernel/idreg-override.c b/arch/arm64/kernel/idreg-override.c
index d8e606fe3c21..8a2ceb591686 100644
--- a/arch/arm64/kernel/idreg-override.c
+++ b/arch/arm64/kernel/idreg-override.c
@@ -17,7 +17,7 @@
 #define FTR_DESC_NAME_LEN	20
 #define FTR_DESC_FIELD_LEN	10
 #define FTR_ALIAS_NAME_LEN	30
-#define FTR_ALIAS_OPTION_LEN	80
+#define FTR_ALIAS_OPTION_LEN	116
 
 struct ftr_set_desc {
 	char 				name[FTR_DESC_NAME_LEN];
@@ -71,6 +71,16 @@ static const struct ftr_set_desc isar1 __initconst = {
 	},
 };
 
+static const struct ftr_set_desc isar2 __initconst = {
+	.name		= "id_aa64isar2",
+	.override	= &id_aa64isar2_override,
+	.fields		= {
+	        { "gpa3", ID_AA64ISAR2_GPA3_SHIFT },
+	        { "apa3", ID_AA64ISAR2_APA3_SHIFT },
+		{}
+	},
+};
+
 extern struct arm64_ftr_override kaslr_feature_override;
 
 static const struct ftr_set_desc kaslr __initconst = {
@@ -88,6 +98,7 @@ static const struct ftr_set_desc * const regs[] __initconst = {
 	&mmfr1,
 	&pfr1,
 	&isar1,
+	&isar2,
 	&kaslr,
 };
 
@@ -100,7 +111,8 @@ static const struct {
 	{ "arm64.nobti",		"id_aa64pfr1.bt=0" },
 	{ "arm64.nopauth",
 	  "id_aa64isar1.gpi=0 id_aa64isar1.gpa=0 "
-	  "id_aa64isar1.api=0 id_aa64isar1.apa=0"	   },
+	  "id_aa64isar1.api=0 id_aa64isar1.apa=0 "
+	  "id_aa64isar2.gpa3=0 id_aa64isar2.apa3=0"	   },
 	{ "arm64.nomte",		"id_aa64pfr1.mte=0" },
 	{ "nokaslr",			"kaslr.disabled=1" },
 };
diff --git a/arch/arm64/kernel/image-vars.h b/arch/arm64/kernel/image-vars.h
index 7eaf1f7c4168..55a1ced8eb77 100644
--- a/arch/arm64/kernel/image-vars.h
+++ b/arch/arm64/kernel/image-vars.h
@@ -66,6 +66,10 @@ KVM_NVHE_ALIAS(kvm_patch_vector_branch);
 KVM_NVHE_ALIAS(kvm_update_va_mask);
 KVM_NVHE_ALIAS(kvm_get_kimage_voffset);
 KVM_NVHE_ALIAS(kvm_compute_final_ctr_el0);
+KVM_NVHE_ALIAS(spectre_bhb_patch_loop_iter);
+KVM_NVHE_ALIAS(spectre_bhb_patch_loop_mitigation_enable);
+KVM_NVHE_ALIAS(spectre_bhb_patch_wa3);
+KVM_NVHE_ALIAS(spectre_bhb_patch_clearbhb);
 
 /* Global kernel state accessed by nVHE hyp code. */
 KVM_NVHE_ALIAS(kvm_vgic_global_state);
diff --git a/arch/arm64/kernel/mte.c b/arch/arm64/kernel/mte.c
index f418ebc65f95..78b3e0f8e997 100644
--- a/arch/arm64/kernel/mte.c
+++ b/arch/arm64/kernel/mte.c
@@ -186,6 +186,11 @@ void mte_check_tfsr_el1(void)
 }
 #endif
 
+/*
+ * This is where we actually resolve the system and process MTE mode
+ * configuration into an actual value in SCTLR_EL1 that affects
+ * userspace.
+ */
 static void mte_update_sctlr_user(struct task_struct *task)
 {
 	/*
@@ -199,9 +204,20 @@ static void mte_update_sctlr_user(struct task_struct *task)
 	unsigned long pref, resolved_mte_tcf;
 
 	pref = __this_cpu_read(mte_tcf_preferred);
+	/*
+	 * If there is no overlap between the system preferred and
+	 * program requested values go with what was requested.
+	 */
 	resolved_mte_tcf = (mte_ctrl & pref) ? pref : mte_ctrl;
 	sctlr &= ~SCTLR_EL1_TCF0_MASK;
-	if (resolved_mte_tcf & MTE_CTRL_TCF_ASYNC)
+	/*
+	 * Pick an actual setting. The order in which we check for
+	 * set bits and map into register values determines our
+	 * default order.
+	 */
+	if (resolved_mte_tcf & MTE_CTRL_TCF_ASYMM)
+		sctlr |= SCTLR_EL1_TCF0_ASYMM;
+	else if (resolved_mte_tcf & MTE_CTRL_TCF_ASYNC)
 		sctlr |= SCTLR_EL1_TCF0_ASYNC;
 	else if (resolved_mte_tcf & MTE_CTRL_TCF_SYNC)
 		sctlr |= SCTLR_EL1_TCF0_SYNC;
@@ -253,6 +269,9 @@ void mte_thread_switch(struct task_struct *next)
 	mte_update_sctlr_user(next);
 	mte_update_gcr_excl(next);
 
+	/* TCO may not have been disabled on exception entry for the current task. */
+	mte_disable_tco_entry(next);
+
 	/*
 	 * Check if an async tag exception occurred at EL1.
 	 *
@@ -293,6 +312,17 @@ long set_mte_ctrl(struct task_struct *task, unsigned long arg)
 	if (arg & PR_MTE_TCF_SYNC)
 		mte_ctrl |= MTE_CTRL_TCF_SYNC;
 
+	/*
+	 * If the system supports it and both sync and async modes are
+	 * specified then implicitly enable asymmetric mode.
+	 * Userspace could see a mix of both sync and async anyway due
+	 * to differing or changing defaults on CPUs.
+	 */
+	if (cpus_have_cap(ARM64_MTE_ASYMM) &&
+	    (arg & PR_MTE_TCF_ASYNC) &&
+	    (arg & PR_MTE_TCF_SYNC))
+		mte_ctrl |= MTE_CTRL_TCF_ASYMM;
+
 	task->thread.mte_ctrl = mte_ctrl;
 	if (task == current) {
 		preempt_disable();
@@ -467,6 +497,8 @@ static ssize_t mte_tcf_preferred_show(struct device *dev,
 		return sysfs_emit(buf, "async\n");
 	case MTE_CTRL_TCF_SYNC:
 		return sysfs_emit(buf, "sync\n");
+	case MTE_CTRL_TCF_ASYMM:
+		return sysfs_emit(buf, "asymm\n");
 	default:
 		return sysfs_emit(buf, "???\n");
 	}
@@ -482,6 +514,8 @@ static ssize_t mte_tcf_preferred_store(struct device *dev,
 		tcf = MTE_CTRL_TCF_ASYNC;
 	else if (sysfs_streq(buf, "sync"))
 		tcf = MTE_CTRL_TCF_SYNC;
+	else if (cpus_have_cap(ARM64_MTE_ASYMM) && sysfs_streq(buf, "asymm"))
+		tcf = MTE_CTRL_TCF_ASYMM;
 	else
 		return -EINVAL;
 
diff --git a/arch/arm64/kernel/perf_event.c b/arch/arm64/kernel/perf_event.c
index cab678ed6618..cb69ff1e6138 100644
--- a/arch/arm64/kernel/perf_event.c
+++ b/arch/arm64/kernel/perf_event.c
@@ -242,6 +242,16 @@ static struct attribute *armv8_pmuv3_event_attrs[] = {
 	ARMV8_EVENT_ATTR(l2d_cache_lmiss_rd, ARMV8_PMUV3_PERFCTR_L2D_CACHE_LMISS_RD),
 	ARMV8_EVENT_ATTR(l2i_cache_lmiss, ARMV8_PMUV3_PERFCTR_L2I_CACHE_LMISS),
 	ARMV8_EVENT_ATTR(l3d_cache_lmiss_rd, ARMV8_PMUV3_PERFCTR_L3D_CACHE_LMISS_RD),
+	ARMV8_EVENT_ATTR(trb_wrap, ARMV8_PMUV3_PERFCTR_TRB_WRAP),
+	ARMV8_EVENT_ATTR(trb_trig, ARMV8_PMUV3_PERFCTR_TRB_TRIG),
+	ARMV8_EVENT_ATTR(trcextout0, ARMV8_PMUV3_PERFCTR_TRCEXTOUT0),
+	ARMV8_EVENT_ATTR(trcextout1, ARMV8_PMUV3_PERFCTR_TRCEXTOUT1),
+	ARMV8_EVENT_ATTR(trcextout2, ARMV8_PMUV3_PERFCTR_TRCEXTOUT2),
+	ARMV8_EVENT_ATTR(trcextout3, ARMV8_PMUV3_PERFCTR_TRCEXTOUT3),
+	ARMV8_EVENT_ATTR(cti_trigout4, ARMV8_PMUV3_PERFCTR_CTI_TRIGOUT4),
+	ARMV8_EVENT_ATTR(cti_trigout5, ARMV8_PMUV3_PERFCTR_CTI_TRIGOUT5),
+	ARMV8_EVENT_ATTR(cti_trigout6, ARMV8_PMUV3_PERFCTR_CTI_TRIGOUT6),
+	ARMV8_EVENT_ATTR(cti_trigout7, ARMV8_PMUV3_PERFCTR_CTI_TRIGOUT7),
 	ARMV8_EVENT_ATTR(ldst_align_lat, ARMV8_PMUV3_PERFCTR_LDST_ALIGN_LAT),
 	ARMV8_EVENT_ATTR(ld_align_lat, ARMV8_PMUV3_PERFCTR_LD_ALIGN_LAT),
 	ARMV8_EVENT_ATTR(st_align_lat, ARMV8_PMUV3_PERFCTR_ST_ALIGN_LAT),
diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c
index 5369e649fa79..7fa97df55e3a 100644
--- a/arch/arm64/kernel/process.c
+++ b/arch/arm64/kernel/process.c
@@ -635,7 +635,8 @@ long set_tagged_addr_ctrl(struct task_struct *task, unsigned long arg)
 		return -EINVAL;
 
 	if (system_supports_mte())
-		valid_mask |= PR_MTE_TCF_MASK | PR_MTE_TAG_MASK;
+		valid_mask |= PR_MTE_TCF_SYNC | PR_MTE_TCF_ASYNC \
+			| PR_MTE_TAG_MASK;
 
 	if (arg & ~valid_mask)
 		return -EINVAL;
diff --git a/arch/arm64/kernel/proton-pack.c b/arch/arm64/kernel/proton-pack.c
index 902e4084c477..5777929d35bf 100644
--- a/arch/arm64/kernel/proton-pack.c
+++ b/arch/arm64/kernel/proton-pack.c
@@ -18,15 +18,18 @@
  */
 
 #include <linux/arm-smccc.h>
+#include <linux/bpf.h>
 #include <linux/cpu.h>
 #include <linux/device.h>
 #include <linux/nospec.h>
 #include <linux/prctl.h>
 #include <linux/sched/task_stack.h>
 
+#include <asm/debug-monitors.h>
 #include <asm/insn.h>
 #include <asm/spectre.h>
 #include <asm/traps.h>
+#include <asm/vectors.h>
 #include <asm/virt.h>
 
 /*
@@ -96,14 +99,51 @@ static bool spectre_v2_mitigations_off(void)
 	return ret;
 }
 
+static const char *get_bhb_affected_string(enum mitigation_state bhb_state)
+{
+	switch (bhb_state) {
+	case SPECTRE_UNAFFECTED:
+		return "";
+	default:
+	case SPECTRE_VULNERABLE:
+		return ", but not BHB";
+	case SPECTRE_MITIGATED:
+		return ", BHB";
+	}
+}
+
+static bool _unprivileged_ebpf_enabled(void)
+{
+#ifdef CONFIG_BPF_SYSCALL
+	return !sysctl_unprivileged_bpf_disabled;
+#else
+	return false;
+#endif
+}
+
 ssize_t cpu_show_spectre_v2(struct device *dev, struct device_attribute *attr,
 			    char *buf)
 {
+	enum mitigation_state bhb_state = arm64_get_spectre_bhb_state();
+	const char *bhb_str = get_bhb_affected_string(bhb_state);
+	const char *v2_str = "Branch predictor hardening";
+
 	switch (spectre_v2_state) {
 	case SPECTRE_UNAFFECTED:
-		return sprintf(buf, "Not affected\n");
+		if (bhb_state == SPECTRE_UNAFFECTED)
+			return sprintf(buf, "Not affected\n");
+
+		/*
+		 * Platforms affected by Spectre-BHB can't report
+		 * "Not affected" for Spectre-v2.
+		 */
+		v2_str = "CSV2";
+		fallthrough;
 	case SPECTRE_MITIGATED:
-		return sprintf(buf, "Mitigation: Branch predictor hardening\n");
+		if (bhb_state == SPECTRE_MITIGATED && _unprivileged_ebpf_enabled())
+			return sprintf(buf, "Vulnerable: Unprivileged eBPF enabled\n");
+
+		return sprintf(buf, "Mitigation: %s%s\n", v2_str, bhb_str);
 	case SPECTRE_VULNERABLE:
 		fallthrough;
 	default:
@@ -193,17 +233,20 @@ static void install_bp_hardening_cb(bp_hardening_cb_t fn)
 	__this_cpu_write(bp_hardening_data.slot, HYP_VECTOR_SPECTRE_DIRECT);
 }
 
-static void call_smc_arch_workaround_1(void)
+/* Called during entry so must be noinstr */
+static noinstr void call_smc_arch_workaround_1(void)
 {
 	arm_smccc_1_1_smc(ARM_SMCCC_ARCH_WORKAROUND_1, NULL);
 }
 
-static void call_hvc_arch_workaround_1(void)
+/* Called during entry so must be noinstr */
+static noinstr void call_hvc_arch_workaround_1(void)
 {
 	arm_smccc_1_1_hvc(ARM_SMCCC_ARCH_WORKAROUND_1, NULL);
 }
 
-static void qcom_link_stack_sanitisation(void)
+/* Called during entry so must be noinstr */
+static noinstr void qcom_link_stack_sanitisation(void)
 {
 	u64 tmp;
 
@@ -554,9 +597,9 @@ void __init spectre_v4_patch_fw_mitigation_enable(struct alt_instr *alt,
  * Patch a NOP in the Spectre-v4 mitigation code with an SMC/HVC instruction
  * to call into firmware to adjust the mitigation state.
  */
-void __init spectre_v4_patch_fw_mitigation_conduit(struct alt_instr *alt,
-						   __le32 *origptr,
-						   __le32 *updptr, int nr_inst)
+void __init smccc_patch_fw_mitigation_conduit(struct alt_instr *alt,
+					       __le32 *origptr,
+					       __le32 *updptr, int nr_inst)
 {
 	u32 insn;
 
@@ -770,3 +813,344 @@ int arch_prctl_spec_ctrl_get(struct task_struct *task, unsigned long which)
 		return -ENODEV;
 	}
 }
+
+/*
+ * Spectre BHB.
+ *
+ * A CPU is either:
+ * - Mitigated by a branchy loop a CPU specific number of times, and listed
+ *   in our "loop mitigated list".
+ * - Mitigated in software by the firmware Spectre v2 call.
+ * - Has the ClearBHB instruction to perform the mitigation.
+ * - Has the 'Exception Clears Branch History Buffer' (ECBHB) feature, so no
+ *   software mitigation in the vectors is needed.
+ * - Has CSV2.3, so is unaffected.
+ */
+static enum mitigation_state spectre_bhb_state;
+
+enum mitigation_state arm64_get_spectre_bhb_state(void)
+{
+	return spectre_bhb_state;
+}
+
+enum bhb_mitigation_bits {
+	BHB_LOOP,
+	BHB_FW,
+	BHB_HW,
+	BHB_INSN,
+};
+static unsigned long system_bhb_mitigations;
+
+/*
+ * This must be called with SCOPE_LOCAL_CPU for each type of CPU, before any
+ * SCOPE_SYSTEM call will give the right answer.
+ */
+u8 spectre_bhb_loop_affected(int scope)
+{
+	u8 k = 0;
+	static u8 max_bhb_k;
+
+	if (scope == SCOPE_LOCAL_CPU) {
+		static const struct midr_range spectre_bhb_k32_list[] = {
+			MIDR_ALL_VERSIONS(MIDR_CORTEX_A78),
+			MIDR_ALL_VERSIONS(MIDR_CORTEX_A78C),
+			MIDR_ALL_VERSIONS(MIDR_CORTEX_X1),
+			MIDR_ALL_VERSIONS(MIDR_CORTEX_A710),
+			MIDR_ALL_VERSIONS(MIDR_CORTEX_X2),
+			MIDR_ALL_VERSIONS(MIDR_NEOVERSE_N2),
+			MIDR_ALL_VERSIONS(MIDR_NEOVERSE_V1),
+			{},
+		};
+		static const struct midr_range spectre_bhb_k24_list[] = {
+			MIDR_ALL_VERSIONS(MIDR_CORTEX_A76),
+			MIDR_ALL_VERSIONS(MIDR_CORTEX_A77),
+			MIDR_ALL_VERSIONS(MIDR_NEOVERSE_N1),
+			{},
+		};
+		static const struct midr_range spectre_bhb_k8_list[] = {
+			MIDR_ALL_VERSIONS(MIDR_CORTEX_A72),
+			MIDR_ALL_VERSIONS(MIDR_CORTEX_A57),
+			{},
+		};
+
+		if (is_midr_in_range_list(read_cpuid_id(), spectre_bhb_k32_list))
+			k = 32;
+		else if (is_midr_in_range_list(read_cpuid_id(), spectre_bhb_k24_list))
+			k = 24;
+		else if (is_midr_in_range_list(read_cpuid_id(), spectre_bhb_k8_list))
+			k =  8;
+
+		max_bhb_k = max(max_bhb_k, k);
+	} else {
+		k = max_bhb_k;
+	}
+
+	return k;
+}
+
+static enum mitigation_state spectre_bhb_get_cpu_fw_mitigation_state(void)
+{
+	int ret;
+	struct arm_smccc_res res;
+
+	arm_smccc_1_1_invoke(ARM_SMCCC_ARCH_FEATURES_FUNC_ID,
+			     ARM_SMCCC_ARCH_WORKAROUND_3, &res);
+
+	ret = res.a0;
+	switch (ret) {
+	case SMCCC_RET_SUCCESS:
+		return SPECTRE_MITIGATED;
+	case SMCCC_ARCH_WORKAROUND_RET_UNAFFECTED:
+		return SPECTRE_UNAFFECTED;
+	default:
+		fallthrough;
+	case SMCCC_RET_NOT_SUPPORTED:
+		return SPECTRE_VULNERABLE;
+	}
+}
+
+static bool is_spectre_bhb_fw_affected(int scope)
+{
+	static bool system_affected;
+	enum mitigation_state fw_state;
+	bool has_smccc = arm_smccc_1_1_get_conduit() != SMCCC_CONDUIT_NONE;
+	static const struct midr_range spectre_bhb_firmware_mitigated_list[] = {
+		MIDR_ALL_VERSIONS(MIDR_CORTEX_A73),
+		MIDR_ALL_VERSIONS(MIDR_CORTEX_A75),
+		{},
+	};
+	bool cpu_in_list = is_midr_in_range_list(read_cpuid_id(),
+					 spectre_bhb_firmware_mitigated_list);
+
+	if (scope != SCOPE_LOCAL_CPU)
+		return system_affected;
+
+	fw_state = spectre_bhb_get_cpu_fw_mitigation_state();
+	if (cpu_in_list || (has_smccc && fw_state == SPECTRE_MITIGATED)) {
+		system_affected = true;
+		return true;
+	}
+
+	return false;
+}
+
+static bool supports_ecbhb(int scope)
+{
+	u64 mmfr1;
+
+	if (scope == SCOPE_LOCAL_CPU)
+		mmfr1 = read_sysreg_s(SYS_ID_AA64MMFR1_EL1);
+	else
+		mmfr1 = read_sanitised_ftr_reg(SYS_ID_AA64MMFR1_EL1);
+
+	return cpuid_feature_extract_unsigned_field(mmfr1,
+						    ID_AA64MMFR1_ECBHB_SHIFT);
+}
+
+bool is_spectre_bhb_affected(const struct arm64_cpu_capabilities *entry,
+			     int scope)
+{
+	WARN_ON(scope != SCOPE_LOCAL_CPU || preemptible());
+
+	if (supports_csv2p3(scope))
+		return false;
+
+	if (supports_clearbhb(scope))
+		return true;
+
+	if (spectre_bhb_loop_affected(scope))
+		return true;
+
+	if (is_spectre_bhb_fw_affected(scope))
+		return true;
+
+	return false;
+}
+
+static void this_cpu_set_vectors(enum arm64_bp_harden_el1_vectors slot)
+{
+	const char *v = arm64_get_bp_hardening_vector(slot);
+
+	if (slot < 0)
+		return;
+
+	__this_cpu_write(this_cpu_vector, v);
+
+	/*
+	 * When KPTI is in use, the vectors are switched when exiting to
+	 * user-space.
+	 */
+	if (arm64_kernel_unmapped_at_el0())
+		return;
+
+	write_sysreg(v, vbar_el1);
+	isb();
+}
+
+void spectre_bhb_enable_mitigation(const struct arm64_cpu_capabilities *entry)
+{
+	bp_hardening_cb_t cpu_cb;
+	enum mitigation_state fw_state, state = SPECTRE_VULNERABLE;
+	struct bp_hardening_data *data = this_cpu_ptr(&bp_hardening_data);
+
+	if (!is_spectre_bhb_affected(entry, SCOPE_LOCAL_CPU))
+		return;
+
+	if (arm64_get_spectre_v2_state() == SPECTRE_VULNERABLE) {
+		/* No point mitigating Spectre-BHB alone. */
+	} else if (!IS_ENABLED(CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY)) {
+		pr_info_once("spectre-bhb mitigation disabled by compile time option\n");
+	} else if (cpu_mitigations_off()) {
+		pr_info_once("spectre-bhb mitigation disabled by command line option\n");
+	} else if (supports_ecbhb(SCOPE_LOCAL_CPU)) {
+		state = SPECTRE_MITIGATED;
+		set_bit(BHB_HW, &system_bhb_mitigations);
+	} else if (supports_clearbhb(SCOPE_LOCAL_CPU)) {
+		/*
+		 * Ensure KVM uses the indirect vector which will have ClearBHB
+		 * added.
+		 */
+		if (!data->slot)
+			data->slot = HYP_VECTOR_INDIRECT;
+
+		this_cpu_set_vectors(EL1_VECTOR_BHB_CLEAR_INSN);
+		state = SPECTRE_MITIGATED;
+		set_bit(BHB_INSN, &system_bhb_mitigations);
+	} else if (spectre_bhb_loop_affected(SCOPE_LOCAL_CPU)) {
+		/*
+		 * Ensure KVM uses the indirect vector which will have the
+		 * branchy-loop added. A57/A72-r0 will already have selected
+		 * the spectre-indirect vector, which is sufficient for BHB
+		 * too.
+		 */
+		if (!data->slot)
+			data->slot = HYP_VECTOR_INDIRECT;
+
+		this_cpu_set_vectors(EL1_VECTOR_BHB_LOOP);
+		state = SPECTRE_MITIGATED;
+		set_bit(BHB_LOOP, &system_bhb_mitigations);
+	} else if (is_spectre_bhb_fw_affected(SCOPE_LOCAL_CPU)) {
+		fw_state = spectre_bhb_get_cpu_fw_mitigation_state();
+		if (fw_state == SPECTRE_MITIGATED) {
+			/*
+			 * Ensure KVM uses one of the spectre bp_hardening
+			 * vectors. The indirect vector doesn't include the EL3
+			 * call, so needs upgrading to
+			 * HYP_VECTOR_SPECTRE_INDIRECT.
+			 */
+			if (!data->slot || data->slot == HYP_VECTOR_INDIRECT)
+				data->slot += 1;
+
+			this_cpu_set_vectors(EL1_VECTOR_BHB_FW);
+
+			/*
+			 * The WA3 call in the vectors supersedes the WA1 call
+			 * made during context-switch. Uninstall any firmware
+			 * bp_hardening callback.
+			 */
+			cpu_cb = spectre_v2_get_sw_mitigation_cb();
+			if (__this_cpu_read(bp_hardening_data.fn) != cpu_cb)
+				__this_cpu_write(bp_hardening_data.fn, NULL);
+
+			state = SPECTRE_MITIGATED;
+			set_bit(BHB_FW, &system_bhb_mitigations);
+		}
+	}
+
+	update_mitigation_state(&spectre_bhb_state, state);
+}
+
+/* Patched to NOP when enabled */
+void noinstr spectre_bhb_patch_loop_mitigation_enable(struct alt_instr *alt,
+						     __le32 *origptr,
+						      __le32 *updptr, int nr_inst)
+{
+	BUG_ON(nr_inst != 1);
+
+	if (test_bit(BHB_LOOP, &system_bhb_mitigations))
+		*updptr++ = cpu_to_le32(aarch64_insn_gen_nop());
+}
+
+/* Patched to NOP when enabled */
+void noinstr spectre_bhb_patch_fw_mitigation_enabled(struct alt_instr *alt,
+						   __le32 *origptr,
+						   __le32 *updptr, int nr_inst)
+{
+	BUG_ON(nr_inst != 1);
+
+	if (test_bit(BHB_FW, &system_bhb_mitigations))
+		*updptr++ = cpu_to_le32(aarch64_insn_gen_nop());
+}
+
+/* Patched to correct the immediate */
+void noinstr spectre_bhb_patch_loop_iter(struct alt_instr *alt,
+				   __le32 *origptr, __le32 *updptr, int nr_inst)
+{
+	u8 rd;
+	u32 insn;
+	u16 loop_count = spectre_bhb_loop_affected(SCOPE_SYSTEM);
+
+	BUG_ON(nr_inst != 1); /* MOV -> MOV */
+
+	if (!IS_ENABLED(CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY))
+		return;
+
+	insn = le32_to_cpu(*origptr);
+	rd = aarch64_insn_decode_register(AARCH64_INSN_REGTYPE_RD, insn);
+	insn = aarch64_insn_gen_movewide(rd, loop_count, 0,
+					 AARCH64_INSN_VARIANT_64BIT,
+					 AARCH64_INSN_MOVEWIDE_ZERO);
+	*updptr++ = cpu_to_le32(insn);
+}
+
+/* Patched to mov WA3 when supported */
+void noinstr spectre_bhb_patch_wa3(struct alt_instr *alt,
+				   __le32 *origptr, __le32 *updptr, int nr_inst)
+{
+	u8 rd;
+	u32 insn;
+
+	BUG_ON(nr_inst != 1); /* MOV -> MOV */
+
+	if (!IS_ENABLED(CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY) ||
+	    !test_bit(BHB_FW, &system_bhb_mitigations))
+		return;
+
+	insn = le32_to_cpu(*origptr);
+	rd = aarch64_insn_decode_register(AARCH64_INSN_REGTYPE_RD, insn);
+
+	insn = aarch64_insn_gen_logical_immediate(AARCH64_INSN_LOGIC_ORR,
+						  AARCH64_INSN_VARIANT_32BIT,
+						  AARCH64_INSN_REG_ZR, rd,
+						  ARM_SMCCC_ARCH_WORKAROUND_3);
+	if (WARN_ON_ONCE(insn == AARCH64_BREAK_FAULT))
+		return;
+
+	*updptr++ = cpu_to_le32(insn);
+}
+
+/* Patched to NOP when not supported */
+void __init spectre_bhb_patch_clearbhb(struct alt_instr *alt,
+				   __le32 *origptr, __le32 *updptr, int nr_inst)
+{
+	BUG_ON(nr_inst != 2);
+
+	if (test_bit(BHB_INSN, &system_bhb_mitigations))
+		return;
+
+	*updptr++ = cpu_to_le32(aarch64_insn_gen_nop());
+	*updptr++ = cpu_to_le32(aarch64_insn_gen_nop());
+}
+
+#ifdef CONFIG_BPF_SYSCALL
+#define EBPF_WARN "Unprivileged eBPF is enabled, data leaks possible via Spectre v2 BHB attacks!\n"
+void unpriv_ebpf_notify(int new_state)
+{
+	if (spectre_v2_state == SPECTRE_VULNERABLE ||
+	    spectre_bhb_state != SPECTRE_MITIGATED)
+		return;
+
+	if (!new_state)
+		pr_err("WARNING: %s", EBPF_WARN);
+}
+#endif
diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c
index f70573928f1b..3505789cf4bd 100644
--- a/arch/arm64/kernel/setup.c
+++ b/arch/arm64/kernel/setup.c
@@ -406,9 +406,6 @@ static int __init topology_init(void)
 {
 	int i;
 
-	for_each_online_node(i)
-		register_one_node(i);
-
 	for_each_possible_cpu(i) {
 		struct cpu *cpu = &per_cpu(cpu_data.cpu, i);
 		cpu->hotpluggable = cpu_can_disable(i);
diff --git a/arch/arm64/kernel/signal.c b/arch/arm64/kernel/signal.c
index d8aaf4b6f432..50fe8eaf7df0 100644
--- a/arch/arm64/kernel/signal.c
+++ b/arch/arm64/kernel/signal.c
@@ -11,7 +11,6 @@
 #include <linux/errno.h>
 #include <linux/kernel.h>
 #include <linux/signal.h>
-#include <linux/personality.h>
 #include <linux/freezer.h>
 #include <linux/stddef.h>
 #include <linux/uaccess.h>
@@ -577,10 +576,12 @@ static int setup_sigframe_layout(struct rt_sigframe_user_layout *user,
 {
 	int err;
 
-	err = sigframe_alloc(user, &user->fpsimd_offset,
-			     sizeof(struct fpsimd_context));
-	if (err)
-		return err;
+	if (system_supports_fpsimd()) {
+		err = sigframe_alloc(user, &user->fpsimd_offset,
+				     sizeof(struct fpsimd_context));
+		if (err)
+			return err;
+	}
 
 	/* fault information, if valid */
 	if (add_all || current->thread.fault_code) {
diff --git a/arch/arm64/kernel/sys_compat.c b/arch/arm64/kernel/sys_compat.c
index db5159a3055f..12c6864e51e1 100644
--- a/arch/arm64/kernel/sys_compat.c
+++ b/arch/arm64/kernel/sys_compat.c
@@ -9,7 +9,6 @@
 
 #include <linux/compat.h>
 #include <linux/cpufeature.h>
-#include <linux/personality.h>
 #include <linux/sched.h>
 #include <linux/sched/signal.h>
 #include <linux/slab.h>
diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c
index 70fc42470f13..0529fd57567e 100644
--- a/arch/arm64/kernel/traps.c
+++ b/arch/arm64/kernel/traps.c
@@ -9,7 +9,6 @@
 #include <linux/bug.h>
 #include <linux/context_tracking.h>
 #include <linux/signal.h>
-#include <linux/personality.h>
 #include <linux/kallsyms.h>
 #include <linux/kprobes.h>
 #include <linux/spinlock.h>
@@ -519,7 +518,7 @@ void do_ptrauth_fault(struct pt_regs *regs, unsigned int esr)
 NOKPROBE_SYMBOL(do_ptrauth_fault);
 
 #define __user_cache_maint(insn, address, res)			\
-	if (address >= user_addr_max()) {			\
+	if (address >= TASK_SIZE_MAX) {				\
 		res = -EFAULT;					\
 	} else {						\
 		uaccess_ttbr0_enable();				\
diff --git a/arch/arm64/kernel/vmlinux.lds.S b/arch/arm64/kernel/vmlinux.lds.S
index 50bab186c49b..edaf0faf766f 100644
--- a/arch/arm64/kernel/vmlinux.lds.S
+++ b/arch/arm64/kernel/vmlinux.lds.S
@@ -341,7 +341,7 @@ ASSERT(__hibernate_exit_text_end - (__hibernate_exit_text_start & ~(SZ_4K - 1))
 	<= SZ_4K, "Hibernate exit text too big or misaligned")
 #endif
 #ifdef CONFIG_UNMAP_KERNEL_AT_EL0
-ASSERT((__entry_tramp_text_end - __entry_tramp_text_start) == PAGE_SIZE,
+ASSERT((__entry_tramp_text_end - __entry_tramp_text_start) <= 3*PAGE_SIZE,
 	"Entry trampoline text too big")
 #endif
 #ifdef CONFIG_KVM
diff --git a/arch/arm64/kvm/arm.c b/arch/arm64/kvm/arm.c
index a4a0063df456..946e401ef6b0 100644
--- a/arch/arm64/kvm/arm.c
+++ b/arch/arm64/kvm/arm.c
@@ -797,6 +797,24 @@ static bool kvm_vcpu_exit_request(struct kvm_vcpu *vcpu, int *ret)
 			xfer_to_guest_mode_work_pending();
 }
 
+/*
+ * Actually run the vCPU, entering an RCU extended quiescent state (EQS) while
+ * the vCPU is running.
+ *
+ * This must be noinstr as instrumentation may make use of RCU, and this is not
+ * safe during the EQS.
+ */
+static int noinstr kvm_arm_vcpu_enter_exit(struct kvm_vcpu *vcpu)
+{
+	int ret;
+
+	guest_state_enter_irqoff();
+	ret = kvm_call_hyp_ret(__kvm_vcpu_run, vcpu);
+	guest_state_exit_irqoff();
+
+	return ret;
+}
+
 /**
  * kvm_arch_vcpu_ioctl_run - the main VCPU run function to execute guest code
  * @vcpu:	The VCPU pointer
@@ -881,9 +899,9 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu)
 		 * Enter the guest
 		 */
 		trace_kvm_entry(*vcpu_pc(vcpu));
-		guest_enter_irqoff();
+		guest_timing_enter_irqoff();
 
-		ret = kvm_call_hyp_ret(__kvm_vcpu_run, vcpu);
+		ret = kvm_arm_vcpu_enter_exit(vcpu);
 
 		vcpu->mode = OUTSIDE_GUEST_MODE;
 		vcpu->stat.exits++;
@@ -918,26 +936,23 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu)
 		kvm_arch_vcpu_ctxsync_fp(vcpu);
 
 		/*
-		 * We may have taken a host interrupt in HYP mode (ie
-		 * while executing the guest). This interrupt is still
-		 * pending, as we haven't serviced it yet!
+		 * We must ensure that any pending interrupts are taken before
+		 * we exit guest timing so that timer ticks are accounted as
+		 * guest time. Transiently unmask interrupts so that any
+		 * pending interrupts are taken.
 		 *
-		 * We're now back in SVC mode, with interrupts
-		 * disabled.  Enabling the interrupts now will have
-		 * the effect of taking the interrupt again, in SVC
-		 * mode this time.
+		 * Per ARM DDI 0487G.b section D1.13.4, an ISB (or other
+		 * context synchronization event) is necessary to ensure that
+		 * pending interrupts are taken.
 		 */
 		local_irq_enable();
+		isb();
+		local_irq_disable();
+
+		guest_timing_exit_irqoff();
+
+		local_irq_enable();
 
-		/*
-		 * We do local_irq_enable() before calling guest_exit() so
-		 * that if a timer interrupt hits while running the guest we
-		 * account that tick as being spent in the guest.  We enable
-		 * preemption after calling guest_exit() so that if we get
-		 * preempted we make sure ticks after that is not counted as
-		 * guest time.
-		 */
-		guest_exit();
 		trace_kvm_exit(ret, kvm_vcpu_trap_get_class(vcpu), *vcpu_pc(vcpu));
 
 		/* Exit types that need handling before we can be preempted */
@@ -1476,10 +1491,7 @@ static int kvm_init_vector_slots(void)
 	base = kern_hyp_va(kvm_ksym_ref(__bp_harden_hyp_vecs));
 	kvm_init_vector_slot(base, HYP_VECTOR_SPECTRE_DIRECT);
 
-	if (!cpus_have_const_cap(ARM64_SPECTRE_V3A))
-		return 0;
-
-	if (!has_vhe()) {
+	if (kvm_system_needs_idmapped_vectors() && !has_vhe()) {
 		err = create_hyp_exec_mappings(__pa_symbol(__bp_harden_hyp_vecs),
 					       __BP_HARDEN_HYP_VECS_SZ, &base);
 		if (err)
@@ -1855,6 +1867,7 @@ static int kvm_hyp_init_protection(u32 hyp_va_bits)
 	kvm_nvhe_sym(id_aa64pfr1_el1_sys_val) = read_sanitised_ftr_reg(SYS_ID_AA64PFR1_EL1);
 	kvm_nvhe_sym(id_aa64isar0_el1_sys_val) = read_sanitised_ftr_reg(SYS_ID_AA64ISAR0_EL1);
 	kvm_nvhe_sym(id_aa64isar1_el1_sys_val) = read_sanitised_ftr_reg(SYS_ID_AA64ISAR1_EL1);
+	kvm_nvhe_sym(id_aa64isar2_el1_sys_val) = read_sanitised_ftr_reg(SYS_ID_AA64ISAR2_EL1);
 	kvm_nvhe_sym(id_aa64mmfr0_el1_sys_val) = read_sanitised_ftr_reg(SYS_ID_AA64MMFR0_EL1);
 	kvm_nvhe_sym(id_aa64mmfr1_el1_sys_val) = read_sanitised_ftr_reg(SYS_ID_AA64MMFR1_EL1);
 	kvm_nvhe_sym(id_aa64mmfr2_el1_sys_val) = read_sanitised_ftr_reg(SYS_ID_AA64MMFR2_EL1);
diff --git a/arch/arm64/kvm/handle_exit.c b/arch/arm64/kvm/handle_exit.c
index fd2dd26caf91..e3140abd2e2e 100644
--- a/arch/arm64/kvm/handle_exit.c
+++ b/arch/arm64/kvm/handle_exit.c
@@ -228,6 +228,14 @@ int handle_exit(struct kvm_vcpu *vcpu, int exception_index)
 {
 	struct kvm_run *run = vcpu->run;
 
+	if (ARM_SERROR_PENDING(exception_index)) {
+		/*
+		 * The SError is handled by handle_exit_early(). If the guest
+		 * survives it will re-execute the original instruction.
+		 */
+		return 1;
+	}
+
 	exception_index = ARM_EXCEPTION_CODE(exception_index);
 
 	switch (exception_index) {
diff --git a/arch/arm64/kvm/hyp/hyp-entry.S b/arch/arm64/kvm/hyp/hyp-entry.S
index b6b6801d96d5..7839d075729b 100644
--- a/arch/arm64/kvm/hyp/hyp-entry.S
+++ b/arch/arm64/kvm/hyp/hyp-entry.S
@@ -62,6 +62,10 @@ el1_sync:				// Guest trapped into EL2
 	/* ARM_SMCCC_ARCH_WORKAROUND_2 handling */
 	eor	w1, w1, #(ARM_SMCCC_ARCH_WORKAROUND_1 ^ \
 			  ARM_SMCCC_ARCH_WORKAROUND_2)
+	cbz	w1, wa_epilogue
+
+	eor	w1, w1, #(ARM_SMCCC_ARCH_WORKAROUND_2 ^ \
+			  ARM_SMCCC_ARCH_WORKAROUND_3)
 	cbnz	w1, el1_trap
 
 wa_epilogue:
@@ -192,7 +196,10 @@ SYM_CODE_END(__kvm_hyp_vector)
 	sub	sp, sp, #(8 * 4)
 	stp	x2, x3, [sp, #(8 * 0)]
 	stp	x0, x1, [sp, #(8 * 2)]
+	alternative_cb spectre_bhb_patch_wa3
+	/* Patched to mov WA3 when supported */
 	mov	w0, #ARM_SMCCC_ARCH_WORKAROUND_1
+	alternative_cb_end
 	smc	#0
 	ldp	x2, x3, [sp, #(8 * 0)]
 	add	sp, sp, #(8 * 2)
@@ -205,6 +212,8 @@ SYM_CODE_END(__kvm_hyp_vector)
 	spectrev2_smccc_wa1_smc
 	.else
 	stp	x0, x1, [sp, #-16]!
+	mitigate_spectre_bhb_loop	x0
+	mitigate_spectre_bhb_clear_insn
 	.endif
 	.if \indirect != 0
 	alternative_cb  kvm_patch_vector_branch
diff --git a/arch/arm64/kvm/hyp/include/hyp/switch.h b/arch/arm64/kvm/hyp/include/hyp/switch.h
index 58e14f8ead23..6379a1e3e6e5 100644
--- a/arch/arm64/kvm/hyp/include/hyp/switch.h
+++ b/arch/arm64/kvm/hyp/include/hyp/switch.h
@@ -174,9 +174,9 @@ static bool kvm_hyp_handle_fpsimd(struct kvm_vcpu *vcpu, u64 *exit_code)
 
 	/* Valid trap.  Switch the context: */
 	if (has_vhe()) {
-		reg = CPACR_EL1_FPEN;
+		reg = CPACR_EL1_FPEN_EL0EN | CPACR_EL1_FPEN_EL1EN;
 		if (sve_guest)
-			reg |= CPACR_EL1_ZEN;
+			reg |= CPACR_EL1_ZEN_EL0EN | CPACR_EL1_ZEN_EL1EN;
 
 		sysreg_clear_set(cpacr_el1, 0, reg);
 	} else {
@@ -402,6 +402,24 @@ static inline bool kvm_hyp_handle_exit(struct kvm_vcpu *vcpu, u64 *exit_code)
 	return false;
 }
 
+static inline void synchronize_vcpu_pstate(struct kvm_vcpu *vcpu, u64 *exit_code)
+{
+	/*
+	 * Check for the conditions of Cortex-A510's #2077057. When these occur
+	 * SPSR_EL2 can't be trusted, but isn't needed either as it is
+	 * unchanged from the value in vcpu_gp_regs(vcpu)->pstate.
+	 * Are we single-stepping the guest, and took a PAC exception from the
+	 * active-not-pending state?
+	 */
+	if (cpus_have_final_cap(ARM64_WORKAROUND_2077057)		&&
+	    vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP			&&
+	    *vcpu_cpsr(vcpu) & DBG_SPSR_SS				&&
+	    ESR_ELx_EC(read_sysreg_el2(SYS_ESR)) == ESR_ELx_EC_PAC)
+		write_sysreg_el2(*vcpu_cpsr(vcpu), SYS_SPSR);
+
+	vcpu->arch.ctxt.regs.pstate = read_sysreg_el2(SYS_SPSR);
+}
+
 /*
  * Return true when we were able to fixup the guest exit and should return to
  * the guest, false when we should restore the host state and return to the
@@ -413,7 +431,7 @@ static inline bool fixup_guest_exit(struct kvm_vcpu *vcpu, u64 *exit_code)
 	 * Save PSTATE early so that we can evaluate the vcpu mode
 	 * early on.
 	 */
-	vcpu->arch.ctxt.regs.pstate = read_sysreg_el2(SYS_SPSR);
+	synchronize_vcpu_pstate(vcpu, exit_code);
 
 	/*
 	 * Check whether we want to repaint the state one way or
@@ -424,7 +442,8 @@ static inline bool fixup_guest_exit(struct kvm_vcpu *vcpu, u64 *exit_code)
 	if (ARM_EXCEPTION_CODE(*exit_code) != ARM_EXCEPTION_IRQ)
 		vcpu->arch.fault.esr_el2 = read_sysreg_el2(SYS_ESR);
 
-	if (ARM_SERROR_PENDING(*exit_code)) {
+	if (ARM_SERROR_PENDING(*exit_code) &&
+	    ARM_EXCEPTION_CODE(*exit_code) != ARM_EXCEPTION_IRQ) {
 		u8 esr_ec = kvm_vcpu_trap_get_class(vcpu);
 
 		/*
diff --git a/arch/arm64/kvm/hyp/include/nvhe/fixed_config.h b/arch/arm64/kvm/hyp/include/nvhe/fixed_config.h
index eea1f6a53723..5ad626527d41 100644
--- a/arch/arm64/kvm/hyp/include/nvhe/fixed_config.h
+++ b/arch/arm64/kvm/hyp/include/nvhe/fixed_config.h
@@ -192,6 +192,11 @@
 	ARM64_FEATURE_MASK(ID_AA64ISAR1_I8MM) \
 	)
 
+#define PVM_ID_AA64ISAR2_ALLOW (\
+	ARM64_FEATURE_MASK(ID_AA64ISAR2_GPA3) | \
+	ARM64_FEATURE_MASK(ID_AA64ISAR2_APA3) \
+	)
+
 u64 pvm_read_id_reg(const struct kvm_vcpu *vcpu, u32 id);
 bool kvm_handle_pvm_sysreg(struct kvm_vcpu *vcpu, u64 *exit_code);
 bool kvm_handle_pvm_restricted(struct kvm_vcpu *vcpu, u64 *exit_code);
diff --git a/arch/arm64/kvm/hyp/nvhe/cache.S b/arch/arm64/kvm/hyp/nvhe/cache.S
index 958734f4d6b0..0c367eb5f4e2 100644
--- a/arch/arm64/kvm/hyp/nvhe/cache.S
+++ b/arch/arm64/kvm/hyp/nvhe/cache.S
@@ -7,7 +7,8 @@
 #include <asm/assembler.h>
 #include <asm/alternative.h>
 
-SYM_FUNC_START_PI(dcache_clean_inval_poc)
+SYM_FUNC_START(__pi_dcache_clean_inval_poc)
 	dcache_by_line_op civac, sy, x0, x1, x2, x3
 	ret
-SYM_FUNC_END_PI(dcache_clean_inval_poc)
+SYM_FUNC_END(__pi_dcache_clean_inval_poc)
+SYM_FUNC_ALIAS(dcache_clean_inval_poc, __pi_dcache_clean_inval_poc)
diff --git a/arch/arm64/kvm/hyp/nvhe/mm.c b/arch/arm64/kvm/hyp/nvhe/mm.c
index 526a7d6fa86f..cdbe8e246418 100644
--- a/arch/arm64/kvm/hyp/nvhe/mm.c
+++ b/arch/arm64/kvm/hyp/nvhe/mm.c
@@ -148,8 +148,10 @@ int hyp_map_vectors(void)
 	phys_addr_t phys;
 	void *bp_base;
 
-	if (!cpus_have_const_cap(ARM64_SPECTRE_V3A))
+	if (!kvm_system_needs_idmapped_vectors()) {
+		__hyp_bp_vect_base = __bp_harden_hyp_vecs;
 		return 0;
+	}
 
 	phys = __hyp_pa(__bp_harden_hyp_vecs);
 	bp_base = (void *)__pkvm_create_private_mapping(phys,
diff --git a/arch/arm64/kvm/hyp/nvhe/sys_regs.c b/arch/arm64/kvm/hyp/nvhe/sys_regs.c
index 792cf6e6ac92..33f5181af330 100644
--- a/arch/arm64/kvm/hyp/nvhe/sys_regs.c
+++ b/arch/arm64/kvm/hyp/nvhe/sys_regs.c
@@ -22,6 +22,7 @@ u64 id_aa64pfr0_el1_sys_val;
 u64 id_aa64pfr1_el1_sys_val;
 u64 id_aa64isar0_el1_sys_val;
 u64 id_aa64isar1_el1_sys_val;
+u64 id_aa64isar2_el1_sys_val;
 u64 id_aa64mmfr0_el1_sys_val;
 u64 id_aa64mmfr1_el1_sys_val;
 u64 id_aa64mmfr2_el1_sys_val;
@@ -183,6 +184,17 @@ static u64 get_pvm_id_aa64isar1(const struct kvm_vcpu *vcpu)
 	return id_aa64isar1_el1_sys_val & allow_mask;
 }
 
+static u64 get_pvm_id_aa64isar2(const struct kvm_vcpu *vcpu)
+{
+	u64 allow_mask = PVM_ID_AA64ISAR2_ALLOW;
+
+	if (!vcpu_has_ptrauth(vcpu))
+		allow_mask &= ~(ARM64_FEATURE_MASK(ID_AA64ISAR2_APA3) |
+				ARM64_FEATURE_MASK(ID_AA64ISAR2_GPA3));
+
+	return id_aa64isar2_el1_sys_val & allow_mask;
+}
+
 static u64 get_pvm_id_aa64mmfr0(const struct kvm_vcpu *vcpu)
 {
 	u64 set_mask;
@@ -225,6 +237,8 @@ u64 pvm_read_id_reg(const struct kvm_vcpu *vcpu, u32 id)
 		return get_pvm_id_aa64isar0(vcpu);
 	case SYS_ID_AA64ISAR1_EL1:
 		return get_pvm_id_aa64isar1(vcpu);
+	case SYS_ID_AA64ISAR2_EL1:
+		return get_pvm_id_aa64isar2(vcpu);
 	case SYS_ID_AA64MMFR0_EL1:
 		return get_pvm_id_aa64mmfr0(vcpu);
 	case SYS_ID_AA64MMFR1_EL1:
diff --git a/arch/arm64/kvm/hyp/vhe/switch.c b/arch/arm64/kvm/hyp/vhe/switch.c
index 11d053fdd604..262dfe03134d 100644
--- a/arch/arm64/kvm/hyp/vhe/switch.c
+++ b/arch/arm64/kvm/hyp/vhe/switch.c
@@ -10,6 +10,7 @@
 #include <linux/kvm_host.h>
 #include <linux/types.h>
 #include <linux/jump_label.h>
+#include <linux/percpu.h>
 #include <uapi/linux/psci.h>
 
 #include <kvm/arm_psci.h>
@@ -24,6 +25,8 @@
 #include <asm/fpsimd.h>
 #include <asm/debug-monitors.h>
 #include <asm/processor.h>
+#include <asm/thread_info.h>
+#include <asm/vectors.h>
 
 /* VHE specific context */
 DEFINE_PER_CPU(struct kvm_host_data, kvm_host_data);
@@ -38,7 +41,7 @@ static void __activate_traps(struct kvm_vcpu *vcpu)
 
 	val = read_sysreg(cpacr_el1);
 	val |= CPACR_EL1_TTA;
-	val &= ~CPACR_EL1_ZEN;
+	val &= ~(CPACR_EL1_ZEN_EL0EN | CPACR_EL1_ZEN_EL1EN);
 
 	/*
 	 * With VHE (HCR.E2H == 1), accesses to CPACR_EL1 are routed to
@@ -53,9 +56,9 @@ static void __activate_traps(struct kvm_vcpu *vcpu)
 
 	if (update_fp_enabled(vcpu)) {
 		if (vcpu_has_sve(vcpu))
-			val |= CPACR_EL1_ZEN;
+			val |= CPACR_EL1_ZEN_EL0EN | CPACR_EL1_ZEN_EL1EN;
 	} else {
-		val &= ~CPACR_EL1_FPEN;
+		val &= ~(CPACR_EL1_FPEN_EL0EN | CPACR_EL1_FPEN_EL1EN);
 		__activate_traps_fpsimd32(vcpu);
 	}
 
@@ -67,7 +70,7 @@ NOKPROBE_SYMBOL(__activate_traps);
 
 static void __deactivate_traps(struct kvm_vcpu *vcpu)
 {
-	extern char vectors[];	/* kernel exception vectors */
+	const char *host_vectors = vectors;
 
 	___deactivate_traps(vcpu);
 
@@ -81,7 +84,10 @@ static void __deactivate_traps(struct kvm_vcpu *vcpu)
 	asm(ALTERNATIVE("nop", "isb", ARM64_WORKAROUND_SPECULATIVE_AT));
 
 	write_sysreg(CPACR_EL1_DEFAULT, cpacr_el1);
-	write_sysreg(vectors, vbar_el1);
+
+	if (!arm64_kernel_unmapped_at_el0())
+		host_vectors = __this_cpu_read(this_cpu_vector);
+	write_sysreg(host_vectors, vbar_el1);
 }
 NOKPROBE_SYMBOL(__deactivate_traps);
 
diff --git a/arch/arm64/kvm/hypercalls.c b/arch/arm64/kvm/hypercalls.c
index 30da78f72b3b..202b8c455724 100644
--- a/arch/arm64/kvm/hypercalls.c
+++ b/arch/arm64/kvm/hypercalls.c
@@ -107,6 +107,18 @@ int kvm_hvc_call_handler(struct kvm_vcpu *vcpu)
 				break;
 			}
 			break;
+		case ARM_SMCCC_ARCH_WORKAROUND_3:
+			switch (arm64_get_spectre_bhb_state()) {
+			case SPECTRE_VULNERABLE:
+				break;
+			case SPECTRE_MITIGATED:
+				val[0] = SMCCC_RET_SUCCESS;
+				break;
+			case SPECTRE_UNAFFECTED:
+				val[0] = SMCCC_ARCH_WORKAROUND_RET_UNAFFECTED;
+				break;
+			}
+			break;
 		case ARM_SMCCC_HV_PV_TIME_FEATURES:
 			val[0] = SMCCC_RET_SUCCESS;
 			break;
diff --git a/arch/arm64/kvm/psci.c b/arch/arm64/kvm/psci.c
index 3eae32876897..5918095c90a5 100644
--- a/arch/arm64/kvm/psci.c
+++ b/arch/arm64/kvm/psci.c
@@ -46,8 +46,7 @@ static unsigned long kvm_psci_vcpu_suspend(struct kvm_vcpu *vcpu)
 	 * specification (ARM DEN 0022A). This means all suspend states
 	 * for KVM will preserve the register state.
 	 */
-	kvm_vcpu_halt(vcpu);
-	kvm_clear_request(KVM_REQ_UNHALT, vcpu);
+	kvm_vcpu_wfi(vcpu);
 
 	return PSCI_RET_SUCCESS;
 }
@@ -406,7 +405,7 @@ int kvm_psci_call(struct kvm_vcpu *vcpu)
 
 int kvm_arm_get_fw_num_regs(struct kvm_vcpu *vcpu)
 {
-	return 3;		/* PSCI version and two workaround registers */
+	return 4;		/* PSCI version and three workaround registers */
 }
 
 int kvm_arm_copy_fw_reg_indices(struct kvm_vcpu *vcpu, u64 __user *uindices)
@@ -420,6 +419,9 @@ int kvm_arm_copy_fw_reg_indices(struct kvm_vcpu *vcpu, u64 __user *uindices)
 	if (put_user(KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2, uindices++))
 		return -EFAULT;
 
+	if (put_user(KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3, uindices++))
+		return -EFAULT;
+
 	return 0;
 }
 
@@ -459,6 +461,17 @@ static int get_kernel_wa_level(u64 regid)
 		case SPECTRE_VULNERABLE:
 			return KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_AVAIL;
 		}
+		break;
+	case KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3:
+		switch (arm64_get_spectre_bhb_state()) {
+		case SPECTRE_VULNERABLE:
+			return KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3_NOT_AVAIL;
+		case SPECTRE_MITIGATED:
+			return KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3_AVAIL;
+		case SPECTRE_UNAFFECTED:
+			return KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3_NOT_REQUIRED;
+		}
+		return KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3_NOT_AVAIL;
 	}
 
 	return -EINVAL;
@@ -475,6 +488,7 @@ int kvm_arm_get_fw_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
 		break;
 	case KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1:
 	case KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2:
+	case KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3:
 		val = get_kernel_wa_level(reg->id) & KVM_REG_FEATURE_LEVEL_MASK;
 		break;
 	default:
@@ -520,6 +534,7 @@ int kvm_arm_set_fw_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
 	}
 
 	case KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1:
+	case KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_3:
 		if (val & ~KVM_REG_FEATURE_LEVEL_MASK)
 			return -EINVAL;
 
diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
index 4dc2fba316ff..baa65292bbc2 100644
--- a/arch/arm64/kvm/sys_regs.c
+++ b/arch/arm64/kvm/sys_regs.c
@@ -1097,6 +1097,11 @@ static u64 read_id_reg(const struct kvm_vcpu *vcpu,
 				 ARM64_FEATURE_MASK(ID_AA64ISAR1_GPA) |
 				 ARM64_FEATURE_MASK(ID_AA64ISAR1_GPI));
 		break;
+	case SYS_ID_AA64ISAR2_EL1:
+		if (!vcpu_has_ptrauth(vcpu))
+			val &= ~(ARM64_FEATURE_MASK(ID_AA64ISAR2_APA3) |
+				 ARM64_FEATURE_MASK(ID_AA64ISAR2_GPA3));
+		break;
 	case SYS_ID_AA64DFR0_EL1:
 		/* Limit debug to ARMv8.0 */
 		val &= ~ARM64_FEATURE_MASK(ID_AA64DFR0_DEBUGVER);
diff --git a/arch/arm64/kvm/vgic/vgic-mmio.c b/arch/arm64/kvm/vgic/vgic-mmio.c
index 7068da080799..49837d3a3ef5 100644
--- a/arch/arm64/kvm/vgic/vgic-mmio.c
+++ b/arch/arm64/kvm/vgic/vgic-mmio.c
@@ -248,6 +248,8 @@ unsigned long vgic_mmio_read_pending(struct kvm_vcpu *vcpu,
 						    IRQCHIP_STATE_PENDING,
 						    &val);
 			WARN_RATELIMIT(err, "IRQ %d", irq->host_irq);
+		} else if (vgic_irq_is_mapped_level(irq)) {
+			val = vgic_get_phys_line_level(irq);
 		} else {
 			val = irq_is_pending(irq);
 		}
diff --git a/arch/arm64/lib/clear_page.S b/arch/arm64/lib/clear_page.S
index 1fd5d790ab80..ebde40e7fa2b 100644
--- a/arch/arm64/lib/clear_page.S
+++ b/arch/arm64/lib/clear_page.S
@@ -14,7 +14,7 @@
  * Parameters:
  *	x0 - dest
  */
-SYM_FUNC_START_PI(clear_page)
+SYM_FUNC_START(__pi_clear_page)
 	mrs	x1, dczid_el0
 	tbnz	x1, #4, 2f	/* Branch if DC ZVA is prohibited */
 	and	w1, w1, #0xf
@@ -35,5 +35,6 @@ SYM_FUNC_START_PI(clear_page)
 	tst	x0, #(PAGE_SIZE - 1)
 	b.ne	2b
 	ret
-SYM_FUNC_END_PI(clear_page)
+SYM_FUNC_END(__pi_clear_page)
+SYM_FUNC_ALIAS(clear_page, __pi_clear_page)
 EXPORT_SYMBOL(clear_page)
diff --git a/arch/arm64/lib/copy_page.S b/arch/arm64/lib/copy_page.S
index 29144f4cd449..c336d2ffdec5 100644
--- a/arch/arm64/lib/copy_page.S
+++ b/arch/arm64/lib/copy_page.S
@@ -17,7 +17,7 @@
  *	x0 - dest
  *	x1 - src
  */
-SYM_FUNC_START_PI(copy_page)
+SYM_FUNC_START(__pi_copy_page)
 alternative_if ARM64_HAS_NO_HW_PREFETCH
 	// Prefetch three cache lines ahead.
 	prfm	pldl1strm, [x1, #128]
@@ -75,5 +75,6 @@ alternative_else_nop_endif
 	stnp	x16, x17, [x0, #112 - 256]
 
 	ret
-SYM_FUNC_END_PI(copy_page)
+SYM_FUNC_END(__pi_copy_page)
+SYM_FUNC_ALIAS(copy_page, __pi_copy_page)
 EXPORT_SYMBOL(copy_page)
diff --git a/arch/arm64/lib/crc32.S b/arch/arm64/lib/crc32.S
index 0f9e10ecda23..8340dccff46f 100644
--- a/arch/arm64/lib/crc32.S
+++ b/arch/arm64/lib/crc32.S
@@ -11,7 +11,44 @@
 
 	.arch		armv8-a+crc
 
-	.macro		__crc32, c
+	.macro		byteorder, reg, be
+	.if		\be
+CPU_LE( rev		\reg, \reg	)
+	.else
+CPU_BE( rev		\reg, \reg	)
+	.endif
+	.endm
+
+	.macro		byteorder16, reg, be
+	.if		\be
+CPU_LE( rev16		\reg, \reg	)
+	.else
+CPU_BE( rev16		\reg, \reg	)
+	.endif
+	.endm
+
+	.macro		bitorder, reg, be
+	.if		\be
+	rbit		\reg, \reg
+	.endif
+	.endm
+
+	.macro		bitorder16, reg, be
+	.if		\be
+	rbit		\reg, \reg
+	lsr		\reg, \reg, #16
+	.endif
+	.endm
+
+	.macro		bitorder8, reg, be
+	.if		\be
+	rbit		\reg, \reg
+	lsr		\reg, \reg, #24
+	.endif
+	.endm
+
+	.macro		__crc32, c, be=0
+	bitorder	w0, \be
 	cmp		x2, #16
 	b.lt		8f			// less than 16 bytes
 
@@ -24,10 +61,14 @@
 	add		x8, x8, x1
 	add		x1, x1, x7
 	ldp		x5, x6, [x8]
-CPU_BE(	rev		x3, x3		)
-CPU_BE(	rev		x4, x4		)
-CPU_BE(	rev		x5, x5		)
-CPU_BE(	rev		x6, x6		)
+	byteorder	x3, \be
+	byteorder	x4, \be
+	byteorder	x5, \be
+	byteorder	x6, \be
+	bitorder	x3, \be
+	bitorder	x4, \be
+	bitorder	x5, \be
+	bitorder	x6, \be
 
 	tst		x7, #8
 	crc32\c\()x	w8, w0, x3
@@ -55,33 +96,43 @@ CPU_BE(	rev		x6, x6		)
 32:	ldp		x3, x4, [x1], #32
 	sub		x2, x2, #32
 	ldp		x5, x6, [x1, #-16]
-CPU_BE(	rev		x3, x3		)
-CPU_BE(	rev		x4, x4		)
-CPU_BE(	rev		x5, x5		)
-CPU_BE(	rev		x6, x6		)
+	byteorder	x3, \be
+	byteorder	x4, \be
+	byteorder	x5, \be
+	byteorder	x6, \be
+	bitorder	x3, \be
+	bitorder	x4, \be
+	bitorder	x5, \be
+	bitorder	x6, \be
 	crc32\c\()x	w0, w0, x3
 	crc32\c\()x	w0, w0, x4
 	crc32\c\()x	w0, w0, x5
 	crc32\c\()x	w0, w0, x6
 	cbnz		x2, 32b
-0:	ret
+0:	bitorder	w0, \be
+	ret
 
 8:	tbz		x2, #3, 4f
 	ldr		x3, [x1], #8
-CPU_BE(	rev		x3, x3		)
+	byteorder	x3, \be
+	bitorder	x3, \be
 	crc32\c\()x	w0, w0, x3
 4:	tbz		x2, #2, 2f
 	ldr		w3, [x1], #4
-CPU_BE(	rev		w3, w3		)
+	byteorder	w3, \be
+	bitorder	w3, \be
 	crc32\c\()w	w0, w0, w3
 2:	tbz		x2, #1, 1f
 	ldrh		w3, [x1], #2
-CPU_BE(	rev16		w3, w3		)
+	byteorder16	w3, \be
+	bitorder16	w3, \be
 	crc32\c\()h	w0, w0, w3
 1:	tbz		x2, #0, 0f
 	ldrb		w3, [x1]
+	bitorder8	w3, \be
 	crc32\c\()b	w0, w0, w3
-0:	ret
+0:	bitorder	w0, \be
+	ret
 	.endm
 
 	.align		5
@@ -99,3 +150,11 @@ alternative_if_not ARM64_HAS_CRC32
 alternative_else_nop_endif
 	__crc32		c
 SYM_FUNC_END(__crc32c_le)
+
+	.align		5
+SYM_FUNC_START(crc32_be)
+alternative_if_not ARM64_HAS_CRC32
+	b		crc32_be_base
+alternative_else_nop_endif
+	__crc32		be=1
+SYM_FUNC_END(crc32_be)
diff --git a/arch/arm64/lib/insn.c b/arch/arm64/lib/insn.c
index fccfe363e567..5e90887deec4 100644
--- a/arch/arm64/lib/insn.c
+++ b/arch/arm64/lib/insn.c
@@ -578,10 +578,16 @@ u32 aarch64_insn_gen_load_store_ex(enum aarch64_insn_register reg,
 
 	switch (type) {
 	case AARCH64_INSN_LDST_LOAD_EX:
+	case AARCH64_INSN_LDST_LOAD_ACQ_EX:
 		insn = aarch64_insn_get_load_ex_value();
+		if (type == AARCH64_INSN_LDST_LOAD_ACQ_EX)
+			insn |= BIT(15);
 		break;
 	case AARCH64_INSN_LDST_STORE_EX:
+	case AARCH64_INSN_LDST_STORE_REL_EX:
 		insn = aarch64_insn_get_store_ex_value();
+		if (type == AARCH64_INSN_LDST_STORE_REL_EX)
+			insn |= BIT(15);
 		break;
 	default:
 		pr_err("%s: unknown load/store exclusive encoding %d\n", __func__, type);
@@ -603,12 +609,65 @@ u32 aarch64_insn_gen_load_store_ex(enum aarch64_insn_register reg,
 					    state);
 }
 
-u32 aarch64_insn_gen_ldadd(enum aarch64_insn_register result,
-			   enum aarch64_insn_register address,
-			   enum aarch64_insn_register value,
-			   enum aarch64_insn_size_type size)
+#ifdef CONFIG_ARM64_LSE_ATOMICS
+static u32 aarch64_insn_encode_ldst_order(enum aarch64_insn_mem_order_type type,
+					  u32 insn)
 {
-	u32 insn = aarch64_insn_get_ldadd_value();
+	u32 order;
+
+	switch (type) {
+	case AARCH64_INSN_MEM_ORDER_NONE:
+		order = 0;
+		break;
+	case AARCH64_INSN_MEM_ORDER_ACQ:
+		order = 2;
+		break;
+	case AARCH64_INSN_MEM_ORDER_REL:
+		order = 1;
+		break;
+	case AARCH64_INSN_MEM_ORDER_ACQREL:
+		order = 3;
+		break;
+	default:
+		pr_err("%s: unknown mem order %d\n", __func__, type);
+		return AARCH64_BREAK_FAULT;
+	}
+
+	insn &= ~GENMASK(23, 22);
+	insn |= order << 22;
+
+	return insn;
+}
+
+u32 aarch64_insn_gen_atomic_ld_op(enum aarch64_insn_register result,
+				  enum aarch64_insn_register address,
+				  enum aarch64_insn_register value,
+				  enum aarch64_insn_size_type size,
+				  enum aarch64_insn_mem_atomic_op op,
+				  enum aarch64_insn_mem_order_type order)
+{
+	u32 insn;
+
+	switch (op) {
+	case AARCH64_INSN_MEM_ATOMIC_ADD:
+		insn = aarch64_insn_get_ldadd_value();
+		break;
+	case AARCH64_INSN_MEM_ATOMIC_CLR:
+		insn = aarch64_insn_get_ldclr_value();
+		break;
+	case AARCH64_INSN_MEM_ATOMIC_EOR:
+		insn = aarch64_insn_get_ldeor_value();
+		break;
+	case AARCH64_INSN_MEM_ATOMIC_SET:
+		insn = aarch64_insn_get_ldset_value();
+		break;
+	case AARCH64_INSN_MEM_ATOMIC_SWP:
+		insn = aarch64_insn_get_swp_value();
+		break;
+	default:
+		pr_err("%s: unimplemented mem atomic op %d\n", __func__, op);
+		return AARCH64_BREAK_FAULT;
+	}
 
 	switch (size) {
 	case AARCH64_INSN_SIZE_32:
@@ -621,6 +680,8 @@ u32 aarch64_insn_gen_ldadd(enum aarch64_insn_register result,
 
 	insn = aarch64_insn_encode_ldst_size(size, insn);
 
+	insn = aarch64_insn_encode_ldst_order(order, insn);
+
 	insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RT, insn,
 					    result);
 
@@ -631,17 +692,68 @@ u32 aarch64_insn_gen_ldadd(enum aarch64_insn_register result,
 					    value);
 }
 
-u32 aarch64_insn_gen_stadd(enum aarch64_insn_register address,
-			   enum aarch64_insn_register value,
-			   enum aarch64_insn_size_type size)
+static u32 aarch64_insn_encode_cas_order(enum aarch64_insn_mem_order_type type,
+					 u32 insn)
 {
-	/*
-	 * STADD is simply encoded as an alias for LDADD with XZR as
-	 * the destination register.
-	 */
-	return aarch64_insn_gen_ldadd(AARCH64_INSN_REG_ZR, address,
-				      value, size);
+	u32 order;
+
+	switch (type) {
+	case AARCH64_INSN_MEM_ORDER_NONE:
+		order = 0;
+		break;
+	case AARCH64_INSN_MEM_ORDER_ACQ:
+		order = BIT(22);
+		break;
+	case AARCH64_INSN_MEM_ORDER_REL:
+		order = BIT(15);
+		break;
+	case AARCH64_INSN_MEM_ORDER_ACQREL:
+		order = BIT(15) | BIT(22);
+		break;
+	default:
+		pr_err("%s: unknown mem order %d\n", __func__, type);
+		return AARCH64_BREAK_FAULT;
+	}
+
+	insn &= ~(BIT(15) | BIT(22));
+	insn |= order;
+
+	return insn;
+}
+
+u32 aarch64_insn_gen_cas(enum aarch64_insn_register result,
+			 enum aarch64_insn_register address,
+			 enum aarch64_insn_register value,
+			 enum aarch64_insn_size_type size,
+			 enum aarch64_insn_mem_order_type order)
+{
+	u32 insn;
+
+	switch (size) {
+	case AARCH64_INSN_SIZE_32:
+	case AARCH64_INSN_SIZE_64:
+		break;
+	default:
+		pr_err("%s: unimplemented size encoding %d\n", __func__, size);
+		return AARCH64_BREAK_FAULT;
+	}
+
+	insn = aarch64_insn_get_cas_value();
+
+	insn = aarch64_insn_encode_ldst_size(size, insn);
+
+	insn = aarch64_insn_encode_cas_order(order, insn);
+
+	insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RT, insn,
+					    result);
+
+	insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RN, insn,
+					    address);
+
+	return aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RS, insn,
+					    value);
 }
+#endif
 
 static u32 aarch64_insn_encode_prfm_imm(enum aarch64_insn_prfm_type type,
 					enum aarch64_insn_prfm_target target,
@@ -1379,7 +1491,7 @@ static u32 aarch64_encode_immediate(u64 imm,
 		 * Compute the rotation to get a continuous set of
 		 * ones, with the first bit set at position 0
 		 */
-		ror = fls(~imm);
+		ror = fls64(~imm);
 	}
 
 	/*
@@ -1456,3 +1568,48 @@ u32 aarch64_insn_gen_extr(enum aarch64_insn_variant variant,
 	insn = aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RN, insn, Rn);
 	return aarch64_insn_encode_register(AARCH64_INSN_REGTYPE_RM, insn, Rm);
 }
+
+u32 aarch64_insn_gen_dmb(enum aarch64_insn_mb_type type)
+{
+	u32 opt;
+	u32 insn;
+
+	switch (type) {
+	case AARCH64_INSN_MB_SY:
+		opt = 0xf;
+		break;
+	case AARCH64_INSN_MB_ST:
+		opt = 0xe;
+		break;
+	case AARCH64_INSN_MB_LD:
+		opt = 0xd;
+		break;
+	case AARCH64_INSN_MB_ISH:
+		opt = 0xb;
+		break;
+	case AARCH64_INSN_MB_ISHST:
+		opt = 0xa;
+		break;
+	case AARCH64_INSN_MB_ISHLD:
+		opt = 0x9;
+		break;
+	case AARCH64_INSN_MB_NSH:
+		opt = 0x7;
+		break;
+	case AARCH64_INSN_MB_NSHST:
+		opt = 0x6;
+		break;
+	case AARCH64_INSN_MB_NSHLD:
+		opt = 0x5;
+		break;
+	default:
+		pr_err("%s: unknown dmb type %d\n", __func__, type);
+		return AARCH64_BREAK_FAULT;
+	}
+
+	insn = aarch64_insn_get_dmb_value();
+	insn &= ~GENMASK(11, 8);
+	insn |= (opt << 8);
+
+	return insn;
+}
diff --git a/arch/arm64/lib/memchr.S b/arch/arm64/lib/memchr.S
index 7c2276fdab54..37a9f2a4f7f4 100644
--- a/arch/arm64/lib/memchr.S
+++ b/arch/arm64/lib/memchr.S
@@ -38,7 +38,7 @@
 
 	.p2align 4
 	nop
-SYM_FUNC_START_WEAK_PI(memchr)
+SYM_FUNC_START(__pi_memchr)
 	and	chrin, chrin, #0xff
 	lsr	wordcnt, cntin, #3
 	cbz	wordcnt, L(byte_loop)
@@ -71,5 +71,6 @@ CPU_LE(	rev	tmp, tmp)
 L(not_found):
 	mov	result, #0
 	ret
-SYM_FUNC_END_PI(memchr)
+SYM_FUNC_END(__pi_memchr)
+SYM_FUNC_ALIAS_WEAK(memchr, __pi_memchr)
 EXPORT_SYMBOL_NOKASAN(memchr)
diff --git a/arch/arm64/lib/memcmp.S b/arch/arm64/lib/memcmp.S
index 7d956384222f..a5ccf2c55f91 100644
--- a/arch/arm64/lib/memcmp.S
+++ b/arch/arm64/lib/memcmp.S
@@ -32,7 +32,7 @@
 #define tmp1		x7
 #define tmp2		x8
 
-SYM_FUNC_START_WEAK_PI(memcmp)
+SYM_FUNC_START(__pi_memcmp)
 	subs	limit, limit, 8
 	b.lo	L(less8)
 
@@ -134,6 +134,6 @@ L(byte_loop):
 	b.eq	L(byte_loop)
 	sub	result, data1w, data2w
 	ret
-
-SYM_FUNC_END_PI(memcmp)
+SYM_FUNC_END(__pi_memcmp)
+SYM_FUNC_ALIAS_WEAK(memcmp, __pi_memcmp)
 EXPORT_SYMBOL_NOKASAN(memcmp)
diff --git a/arch/arm64/lib/memcpy.S b/arch/arm64/lib/memcpy.S
index b82fd64ee1e1..4ab48d49c451 100644
--- a/arch/arm64/lib/memcpy.S
+++ b/arch/arm64/lib/memcpy.S
@@ -57,10 +57,7 @@
    The loop tail is handled by always copying 64 bytes from the end.
 */
 
-SYM_FUNC_START_ALIAS(__memmove)
-SYM_FUNC_START_WEAK_ALIAS_PI(memmove)
-SYM_FUNC_START_ALIAS(__memcpy)
-SYM_FUNC_START_WEAK_PI(memcpy)
+SYM_FUNC_START(__pi_memcpy)
 	add	srcend, src, count
 	add	dstend, dstin, count
 	cmp	count, 128
@@ -241,12 +238,16 @@ L(copy64_from_start):
 	stp	B_l, B_h, [dstin, 16]
 	stp	C_l, C_h, [dstin]
 	ret
+SYM_FUNC_END(__pi_memcpy)
 
-SYM_FUNC_END_PI(memcpy)
-EXPORT_SYMBOL(memcpy)
-SYM_FUNC_END_ALIAS(__memcpy)
+SYM_FUNC_ALIAS(__memcpy, __pi_memcpy)
 EXPORT_SYMBOL(__memcpy)
-SYM_FUNC_END_ALIAS_PI(memmove)
-EXPORT_SYMBOL(memmove)
-SYM_FUNC_END_ALIAS(__memmove)
+SYM_FUNC_ALIAS_WEAK(memcpy, __memcpy)
+EXPORT_SYMBOL(memcpy)
+
+SYM_FUNC_ALIAS(__pi_memmove, __pi_memcpy)
+
+SYM_FUNC_ALIAS(__memmove, __pi_memmove)
 EXPORT_SYMBOL(__memmove)
+SYM_FUNC_ALIAS_WEAK(memmove, __memmove)
+EXPORT_SYMBOL(memmove)
diff --git a/arch/arm64/lib/memset.S b/arch/arm64/lib/memset.S
index a9c1c9a01ea9..a5aebe82ad73 100644
--- a/arch/arm64/lib/memset.S
+++ b/arch/arm64/lib/memset.S
@@ -42,8 +42,7 @@ dst		.req	x8
 tmp3w		.req	w9
 tmp3		.req	x9
 
-SYM_FUNC_START_ALIAS(__memset)
-SYM_FUNC_START_WEAK_PI(memset)
+SYM_FUNC_START(__pi_memset)
 	mov	dst, dstin	/* Preserve return value.  */
 	and	A_lw, val, #255
 	orr	A_lw, A_lw, A_lw, lsl #8
@@ -202,7 +201,10 @@ SYM_FUNC_START_WEAK_PI(memset)
 	ands	count, count, zva_bits_x
 	b.ne	.Ltail_maybe_long
 	ret
-SYM_FUNC_END_PI(memset)
-EXPORT_SYMBOL(memset)
-SYM_FUNC_END_ALIAS(__memset)
+SYM_FUNC_END(__pi_memset)
+
+SYM_FUNC_ALIAS(__memset, __pi_memset)
 EXPORT_SYMBOL(__memset)
+
+SYM_FUNC_ALIAS_WEAK(memset, __pi_memset)
+EXPORT_SYMBOL(memset)
diff --git a/arch/arm64/lib/mte.S b/arch/arm64/lib/mte.S
index f531dcb95174..8590af3c98c0 100644
--- a/arch/arm64/lib/mte.S
+++ b/arch/arm64/lib/mte.S
@@ -134,7 +134,7 @@ SYM_FUNC_END(mte_copy_tags_to_user)
 /*
  * Save the tags in a page
  *   x0 - page address
- *   x1 - tag storage
+ *   x1 - tag storage, MTE_PAGE_TAG_STORAGE bytes
  */
 SYM_FUNC_START(mte_save_page_tags)
 	multitag_transfer_size x7, x5
@@ -158,7 +158,7 @@ SYM_FUNC_END(mte_save_page_tags)
 /*
  * Restore the tags in a page
  *   x0 - page address
- *   x1 - tag storage
+ *   x1 - tag storage, MTE_PAGE_TAG_STORAGE bytes
  */
 SYM_FUNC_START(mte_restore_page_tags)
 	multitag_transfer_size x7, x5
diff --git a/arch/arm64/lib/strchr.S b/arch/arm64/lib/strchr.S
index 1f47eae3b0d6..94ee67a6b212 100644
--- a/arch/arm64/lib/strchr.S
+++ b/arch/arm64/lib/strchr.S
@@ -18,7 +18,7 @@
  * Returns:
  *	x0 - address of first occurrence of 'c' or 0
  */
-SYM_FUNC_START_WEAK(strchr)
+SYM_FUNC_START(__pi_strchr)
 	and	w1, w1, #0xff
 1:	ldrb	w2, [x0], #1
 	cmp	w2, w1
@@ -28,5 +28,7 @@ SYM_FUNC_START_WEAK(strchr)
 	cmp	w2, w1
 	csel	x0, x0, xzr, eq
 	ret
-SYM_FUNC_END(strchr)
+SYM_FUNC_END(__pi_strchr)
+
+SYM_FUNC_ALIAS_WEAK(strchr, __pi_strchr)
 EXPORT_SYMBOL_NOKASAN(strchr)
diff --git a/arch/arm64/lib/strcmp.S b/arch/arm64/lib/strcmp.S
index 83bcad72ec97..9b89b4533607 100644
--- a/arch/arm64/lib/strcmp.S
+++ b/arch/arm64/lib/strcmp.S
@@ -1,9 +1,9 @@
 /* SPDX-License-Identifier: GPL-2.0-only */
 /*
- * Copyright (c) 2012-2021, Arm Limited.
+ * Copyright (c) 2012-2022, Arm Limited.
  *
  * Adapted from the original at:
- * https://github.com/ARM-software/optimized-routines/blob/afd6244a1f8d9229/string/aarch64/strcmp.S
+ * https://github.com/ARM-software/optimized-routines/blob/189dfefe37d54c5b/string/aarch64/strcmp.S
  */
 
 #include <linux/linkage.h>
@@ -11,166 +11,180 @@
 
 /* Assumptions:
  *
- * ARMv8-a, AArch64
+ * ARMv8-a, AArch64.
+ * MTE compatible.
  */
 
 #define L(label) .L ## label
 
 #define REP8_01 0x0101010101010101
 #define REP8_7f 0x7f7f7f7f7f7f7f7f
-#define REP8_80 0x8080808080808080
 
-/* Parameters and result.  */
 #define src1		x0
 #define src2		x1
 #define result		x0
 
-/* Internal variables.  */
 #define data1		x2
 #define data1w		w2
 #define data2		x3
 #define data2w		w3
 #define has_nul		x4
 #define diff		x5
+#define off1		x5
 #define syndrome	x6
-#define tmp1		x7
-#define tmp2		x8
-#define tmp3		x9
-#define zeroones	x10
-#define pos		x11
-
-	/* Start of performance-critical section  -- one 64B cache line.  */
-	.align 6
-SYM_FUNC_START_WEAK_PI(strcmp)
-	eor	tmp1, src1, src2
-	mov	zeroones, #REP8_01
-	tst	tmp1, #7
+#define tmp		x6
+#define data3		x7
+#define zeroones	x8
+#define shift		x9
+#define off2		x10
+
+/* On big-endian early bytes are at MSB and on little-endian LSB.
+   LS_FW means shifting towards early bytes.  */
+#ifdef __AARCH64EB__
+# define LS_FW lsl
+#else
+# define LS_FW lsr
+#endif
+
+/* NUL detection works on the principle that (X - 1) & (~X) & 0x80
+   (=> (X - 1) & ~(X | 0x7f)) is non-zero iff a byte is zero, and
+   can be done in parallel across the entire word.
+   Since carry propagation makes 0x1 bytes before a NUL byte appear
+   NUL too in big-endian, byte-reverse the data before the NUL check.  */
+
+
+SYM_FUNC_START(__pi_strcmp)
+	sub	off2, src2, src1
+	mov	zeroones, REP8_01
+	and	tmp, src1, 7
+	tst	off2, 7
 	b.ne	L(misaligned8)
-	ands	tmp1, src1, #7
-	b.ne	L(mutual_align)
-	/* NUL detection works on the principle that (X - 1) & (~X) & 0x80
-	   (=> (X - 1) & ~(X | 0x7f)) is non-zero iff a byte is zero, and
-	   can be done in parallel across the entire word.  */
+	cbnz	tmp, L(mutual_align)
+
+	.p2align 4
+
 L(loop_aligned):
-	ldr	data1, [src1], #8
-	ldr	data2, [src2], #8
+	ldr	data2, [src1, off2]
+	ldr	data1, [src1], 8
 L(start_realigned):
-	sub	tmp1, data1, zeroones
-	orr	tmp2, data1, #REP8_7f
-	eor	diff, data1, data2	/* Non-zero if differences found.  */
-	bic	has_nul, tmp1, tmp2	/* Non-zero if NUL terminator.  */
+#ifdef __AARCH64EB__
+	rev	tmp, data1
+	sub	has_nul, tmp, zeroones
+	orr	tmp, tmp, REP8_7f
+#else
+	sub	has_nul, data1, zeroones
+	orr	tmp, data1, REP8_7f
+#endif
+	bics	has_nul, has_nul, tmp	/* Non-zero if NUL terminator.  */
+	ccmp	data1, data2, 0, eq
+	b.eq	L(loop_aligned)
+#ifdef __AARCH64EB__
+	rev	has_nul, has_nul
+#endif
+	eor	diff, data1, data2
 	orr	syndrome, diff, has_nul
-	cbz	syndrome, L(loop_aligned)
-	/* End of performance-critical section  -- one 64B cache line.  */
-
 L(end):
-#ifndef	__AARCH64EB__
+#ifndef __AARCH64EB__
 	rev	syndrome, syndrome
 	rev	data1, data1
-	/* The MS-non-zero bit of the syndrome marks either the first bit
-	   that is different, or the top bit of the first zero byte.
-	   Shifting left now will bring the critical information into the
-	   top bits.  */
-	clz	pos, syndrome
 	rev	data2, data2
-	lsl	data1, data1, pos
-	lsl	data2, data2, pos
-	/* But we need to zero-extend (char is unsigned) the value and then
-	   perform a signed 32-bit subtraction.  */
-	lsr	data1, data1, #56
-	sub	result, data1, data2, lsr #56
-	ret
-#else
-	/* For big-endian we cannot use the trick with the syndrome value
-	   as carry-propagation can corrupt the upper bits if the trailing
-	   bytes in the string contain 0x01.  */
-	/* However, if there is no NUL byte in the dword, we can generate
-	   the result directly.  We can't just subtract the bytes as the
-	   MSB might be significant.  */
-	cbnz	has_nul, 1f
-	cmp	data1, data2
-	cset	result, ne
-	cneg	result, result, lo
-	ret
-1:
-	/* Re-compute the NUL-byte detection, using a byte-reversed value.  */
-	rev	tmp3, data1
-	sub	tmp1, tmp3, zeroones
-	orr	tmp2, tmp3, #REP8_7f
-	bic	has_nul, tmp1, tmp2
-	rev	has_nul, has_nul
-	orr	syndrome, diff, has_nul
-	clz	pos, syndrome
-	/* The MS-non-zero bit of the syndrome marks either the first bit
-	   that is different, or the top bit of the first zero byte.
+#endif
+	clz	shift, syndrome
+	/* The most-significant-non-zero bit of the syndrome marks either the
+	   first bit that is different, or the top bit of the first zero byte.
 	   Shifting left now will bring the critical information into the
 	   top bits.  */
-	lsl	data1, data1, pos
-	lsl	data2, data2, pos
+	lsl	data1, data1, shift
+	lsl	data2, data2, shift
 	/* But we need to zero-extend (char is unsigned) the value and then
 	   perform a signed 32-bit subtraction.  */
-	lsr	data1, data1, #56
-	sub	result, data1, data2, lsr #56
+	lsr	data1, data1, 56
+	sub	result, data1, data2, lsr 56
 	ret
-#endif
+
+	.p2align 4
 
 L(mutual_align):
 	/* Sources are mutually aligned, but are not currently at an
 	   alignment boundary.  Round down the addresses and then mask off
-	   the bytes that preceed the start point.  */
-	bic	src1, src1, #7
-	bic	src2, src2, #7
-	lsl	tmp1, tmp1, #3		/* Bytes beyond alignment -> bits.  */
-	ldr	data1, [src1], #8
-	neg	tmp1, tmp1		/* Bits to alignment -64.  */
-	ldr	data2, [src2], #8
-	mov	tmp2, #~0
-#ifdef __AARCH64EB__
-	/* Big-endian.  Early bytes are at MSB.  */
-	lsl	tmp2, tmp2, tmp1	/* Shift (tmp1 & 63).  */
-#else
-	/* Little-endian.  Early bytes are at LSB.  */
-	lsr	tmp2, tmp2, tmp1	/* Shift (tmp1 & 63).  */
-#endif
-	orr	data1, data1, tmp2
-	orr	data2, data2, tmp2
+	   the bytes that precede the start point.  */
+	bic	src1, src1, 7
+	ldr	data2, [src1, off2]
+	ldr	data1, [src1], 8
+	neg	shift, src2, lsl 3	/* Bits to alignment -64.  */
+	mov	tmp, -1
+	LS_FW	tmp, tmp, shift
+	orr	data1, data1, tmp
+	orr	data2, data2, tmp
 	b	L(start_realigned)
 
 L(misaligned8):
 	/* Align SRC1 to 8 bytes and then compare 8 bytes at a time, always
-	   checking to make sure that we don't access beyond page boundary in
-	   SRC2.  */
-	tst	src1, #7
-	b.eq	L(loop_misaligned)
+	   checking to make sure that we don't access beyond the end of SRC2.  */
+	cbz	tmp, L(src1_aligned)
 L(do_misaligned):
-	ldrb	data1w, [src1], #1
-	ldrb	data2w, [src2], #1
-	cmp	data1w, #1
-	ccmp	data1w, data2w, #0, cs	/* NZCV = 0b0000.  */
+	ldrb	data1w, [src1], 1
+	ldrb	data2w, [src2], 1
+	cmp	data1w, 0
+	ccmp	data1w, data2w, 0, ne	/* NZCV = 0b0000.  */
 	b.ne	L(done)
-	tst	src1, #7
+	tst	src1, 7
 	b.ne	L(do_misaligned)
 
-L(loop_misaligned):
-	/* Test if we are within the last dword of the end of a 4K page.  If
-	   yes then jump back to the misaligned loop to copy a byte at a time.  */
-	and	tmp1, src2, #0xff8
-	eor	tmp1, tmp1, #0xff8
-	cbz	tmp1, L(do_misaligned)
-	ldr	data1, [src1], #8
-	ldr	data2, [src2], #8
-
-	sub	tmp1, data1, zeroones
-	orr	tmp2, data1, #REP8_7f
-	eor	diff, data1, data2	/* Non-zero if differences found.  */
-	bic	has_nul, tmp1, tmp2	/* Non-zero if NUL terminator.  */
+L(src1_aligned):
+	neg	shift, src2, lsl 3
+	bic	src2, src2, 7
+	ldr	data3, [src2], 8
+#ifdef __AARCH64EB__
+	rev	data3, data3
+#endif
+	lsr	tmp, zeroones, shift
+	orr	data3, data3, tmp
+	sub	has_nul, data3, zeroones
+	orr	tmp, data3, REP8_7f
+	bics	has_nul, has_nul, tmp
+	b.ne	L(tail)
+
+	sub	off1, src2, src1
+
+	.p2align 4
+
+L(loop_unaligned):
+	ldr	data3, [src1, off1]
+	ldr	data2, [src1, off2]
+#ifdef __AARCH64EB__
+	rev	data3, data3
+#endif
+	sub	has_nul, data3, zeroones
+	orr	tmp, data3, REP8_7f
+	ldr	data1, [src1], 8
+	bics	has_nul, has_nul, tmp
+	ccmp	data1, data2, 0, eq
+	b.eq	L(loop_unaligned)
+
+	lsl	tmp, has_nul, shift
+#ifdef __AARCH64EB__
+	rev	tmp, tmp
+#endif
+	eor	diff, data1, data2
+	orr	syndrome, diff, tmp
+	cbnz	syndrome, L(end)
+L(tail):
+	ldr	data1, [src1]
+	neg	shift, shift
+	lsr	data2, data3, shift
+	lsr	has_nul, has_nul, shift
+#ifdef __AARCH64EB__
+	rev     data2, data2
+	rev	has_nul, has_nul
+#endif
+	eor	diff, data1, data2
 	orr	syndrome, diff, has_nul
-	cbz	syndrome, L(loop_misaligned)
 	b	L(end)
 
 L(done):
 	sub	result, data1, data2
 	ret
-
-SYM_FUNC_END_PI(strcmp)
-EXPORT_SYMBOL_NOHWKASAN(strcmp)
+SYM_FUNC_END(__pi_strcmp)
+SYM_FUNC_ALIAS_WEAK(strcmp, __pi_strcmp)
+EXPORT_SYMBOL_NOKASAN(strcmp)
diff --git a/arch/arm64/lib/strlen.S b/arch/arm64/lib/strlen.S
index 1648790e91b3..4919fe81ae54 100644
--- a/arch/arm64/lib/strlen.S
+++ b/arch/arm64/lib/strlen.S
@@ -79,7 +79,7 @@
 	   whether the first fetch, which may be misaligned, crosses a page
 	   boundary.  */
 
-SYM_FUNC_START_WEAK_PI(strlen)
+SYM_FUNC_START(__pi_strlen)
 	and	tmp1, srcin, MIN_PAGE_SIZE - 1
 	mov	zeroones, REP8_01
 	cmp	tmp1, MIN_PAGE_SIZE - 16
@@ -208,6 +208,6 @@ L(page_cross):
 	csel	data1, data1, tmp4, eq
 	csel	data2, data2, tmp2, eq
 	b	L(page_cross_entry)
-
-SYM_FUNC_END_PI(strlen)
+SYM_FUNC_END(__pi_strlen)
+SYM_FUNC_ALIAS_WEAK(strlen, __pi_strlen)
 EXPORT_SYMBOL_NOKASAN(strlen)
diff --git a/arch/arm64/lib/strncmp.S b/arch/arm64/lib/strncmp.S
index e42bcfcd37e6..fe7bbc0b42a7 100644
--- a/arch/arm64/lib/strncmp.S
+++ b/arch/arm64/lib/strncmp.S
@@ -1,9 +1,9 @@
 /* SPDX-License-Identifier: GPL-2.0-only */
 /*
- * Copyright (c) 2013-2021, Arm Limited.
+ * Copyright (c) 2013-2022, Arm Limited.
  *
  * Adapted from the original at:
- * https://github.com/ARM-software/optimized-routines/blob/e823e3abf5f89ecb/string/aarch64/strncmp.S
+ * https://github.com/ARM-software/optimized-routines/blob/189dfefe37d54c5b/string/aarch64/strncmp.S
  */
 
 #include <linux/linkage.h>
@@ -11,14 +11,14 @@
 
 /* Assumptions:
  *
- * ARMv8-a, AArch64
+ * ARMv8-a, AArch64.
+ * MTE compatible.
  */
 
 #define L(label) .L ## label
 
 #define REP8_01 0x0101010101010101
 #define REP8_7f 0x7f7f7f7f7f7f7f7f
-#define REP8_80 0x8080808080808080
 
 /* Parameters and result.  */
 #define src1		x0
@@ -39,12 +39,26 @@
 #define tmp3		x10
 #define zeroones	x11
 #define pos		x12
-#define limit_wd	x13
-#define mask		x14
-#define endloop		x15
+#define mask		x13
+#define endloop		x14
 #define count		mask
+#define offset		pos
+#define neg_offset	x15
 
-SYM_FUNC_START_WEAK_PI(strncmp)
+/* Define endian dependent shift operations.
+   On big-endian early bytes are at MSB and on little-endian LSB.
+   LS_FW means shifting towards early bytes.
+   LS_BK means shifting towards later bytes.
+   */
+#ifdef __AARCH64EB__
+#define LS_FW lsl
+#define LS_BK lsr
+#else
+#define LS_FW lsr
+#define LS_BK lsl
+#endif
+
+SYM_FUNC_START(__pi_strncmp)
 	cbz	limit, L(ret0)
 	eor	tmp1, src1, src2
 	mov	zeroones, #REP8_01
@@ -52,9 +66,6 @@ SYM_FUNC_START_WEAK_PI(strncmp)
 	and	count, src1, #7
 	b.ne	L(misaligned8)
 	cbnz	count, L(mutual_align)
-	/* Calculate the number of full and partial words -1.  */
-	sub	limit_wd, limit, #1	/* limit != 0, so no underflow.  */
-	lsr	limit_wd, limit_wd, #3	/* Convert to Dwords.  */
 
 	/* NUL detection works on the principle that (X - 1) & (~X) & 0x80
 	   (=> (X - 1) & ~(X | 0x7f)) is non-zero iff a byte is zero, and
@@ -64,56 +75,52 @@ L(loop_aligned):
 	ldr	data1, [src1], #8
 	ldr	data2, [src2], #8
 L(start_realigned):
-	subs	limit_wd, limit_wd, #1
+	subs	limit, limit, #8
 	sub	tmp1, data1, zeroones
 	orr	tmp2, data1, #REP8_7f
 	eor	diff, data1, data2	/* Non-zero if differences found.  */
-	csinv	endloop, diff, xzr, pl	/* Last Dword or differences.  */
+	csinv	endloop, diff, xzr, hi	/* Last Dword or differences.  */
 	bics	has_nul, tmp1, tmp2	/* Non-zero if NUL terminator.  */
 	ccmp	endloop, #0, #0, eq
 	b.eq	L(loop_aligned)
 	/* End of main loop */
 
-	/* Not reached the limit, must have found the end or a diff.  */
-	tbz	limit_wd, #63, L(not_limit)
-
-	/* Limit % 8 == 0 => all bytes significant.  */
-	ands	limit, limit, #7
-	b.eq	L(not_limit)
-
-	lsl	limit, limit, #3	/* Bits -> bytes.  */
-	mov	mask, #~0
-#ifdef __AARCH64EB__
-	lsr	mask, mask, limit
-#else
-	lsl	mask, mask, limit
-#endif
-	bic	data1, data1, mask
-	bic	data2, data2, mask
-
-	/* Make sure that the NUL byte is marked in the syndrome.  */
-	orr	has_nul, has_nul, mask
-
-L(not_limit):
+L(full_check):
+#ifndef __AARCH64EB__
 	orr	syndrome, diff, has_nul
-
-#ifndef	__AARCH64EB__
+	add	limit, limit, 8	/* Rewind limit to before last subs. */
+L(syndrome_check):
+	/* Limit was reached. Check if the NUL byte or the difference
+	   is before the limit. */
 	rev	syndrome, syndrome
 	rev	data1, data1
-	/* The MS-non-zero bit of the syndrome marks either the first bit
-	   that is different, or the top bit of the first zero byte.
-	   Shifting left now will bring the critical information into the
-	   top bits.  */
 	clz	pos, syndrome
 	rev	data2, data2
 	lsl	data1, data1, pos
+	cmp	limit, pos, lsr #3
 	lsl	data2, data2, pos
 	/* But we need to zero-extend (char is unsigned) the value and then
 	   perform a signed 32-bit subtraction.  */
 	lsr	data1, data1, #56
 	sub	result, data1, data2, lsr #56
+	csel result, result, xzr, hi
 	ret
 #else
+	/* Not reached the limit, must have found the end or a diff.  */
+	tbz	limit, #63, L(not_limit)
+	add	tmp1, limit, 8
+	cbz	limit, L(not_limit)
+
+	lsl	limit, tmp1, #3	/* Bits -> bytes.  */
+	mov	mask, #~0
+	lsr	mask, mask, limit
+	bic	data1, data1, mask
+	bic	data2, data2, mask
+
+	/* Make sure that the NUL byte is marked in the syndrome.  */
+	orr	has_nul, has_nul, mask
+
+L(not_limit):
 	/* For big-endian we cannot use the trick with the syndrome value
 	   as carry-propagation can corrupt the upper bits if the trailing
 	   bytes in the string contain 0x01.  */
@@ -134,10 +141,11 @@ L(not_limit):
 	rev	has_nul, has_nul
 	orr	syndrome, diff, has_nul
 	clz	pos, syndrome
-	/* The MS-non-zero bit of the syndrome marks either the first bit
-	   that is different, or the top bit of the first zero byte.
+	/* The most-significant-non-zero bit of the syndrome marks either the
+	   first bit that is different, or the top bit of the first zero byte.
 	   Shifting left now will bring the critical information into the
 	   top bits.  */
+L(end_quick):
 	lsl	data1, data1, pos
 	lsl	data2, data2, pos
 	/* But we need to zero-extend (char is unsigned) the value and then
@@ -159,22 +167,12 @@ L(mutual_align):
 	neg	tmp3, count, lsl #3	/* 64 - bits(bytes beyond align). */
 	ldr	data2, [src2], #8
 	mov	tmp2, #~0
-	sub	limit_wd, limit, #1	/* limit != 0, so no underflow.  */
-#ifdef __AARCH64EB__
-	/* Big-endian.  Early bytes are at MSB.  */
-	lsl	tmp2, tmp2, tmp3	/* Shift (count & 63).  */
-#else
-	/* Little-endian.  Early bytes are at LSB.  */
-	lsr	tmp2, tmp2, tmp3	/* Shift (count & 63).  */
-#endif
-	and	tmp3, limit_wd, #7
-	lsr	limit_wd, limit_wd, #3
-	/* Adjust the limit. Only low 3 bits used, so overflow irrelevant.  */
-	add	limit, limit, count
-	add	tmp3, tmp3, count
+	LS_FW	tmp2, tmp2, tmp3	/* Shift (count & 63).  */
+	/* Adjust the limit and ensure it doesn't overflow.  */
+	adds	limit, limit, count
+	csinv	limit, limit, xzr, lo
 	orr	data1, data1, tmp2
 	orr	data2, data2, tmp2
-	add	limit_wd, limit_wd, tmp3, lsr #3
 	b	L(start_realigned)
 
 	.p2align 4
@@ -197,13 +195,11 @@ L(done):
 	/* Align the SRC1 to a dword by doing a bytewise compare and then do
 	   the dword loop.  */
 L(try_misaligned_words):
-	lsr	limit_wd, limit, #3
-	cbz	count, L(do_misaligned)
+	cbz	count, L(src1_aligned)
 
 	neg	count, count
 	and	count, count, #7
 	sub	limit, limit, count
-	lsr	limit_wd, limit, #3
 
 L(page_end_loop):
 	ldrb	data1w, [src1], #1
@@ -214,48 +210,101 @@ L(page_end_loop):
 	subs	count, count, #1
 	b.hi	L(page_end_loop)
 
-L(do_misaligned):
-	/* Prepare ourselves for the next page crossing.  Unlike the aligned
-	   loop, we fetch 1 less dword because we risk crossing bounds on
-	   SRC2.  */
-	mov	count, #8
-	subs	limit_wd, limit_wd, #1
-	b.lo	L(done_loop)
-L(loop_misaligned):
-	and	tmp2, src2, #0xff8
-	eor	tmp2, tmp2, #0xff8
-	cbz	tmp2, L(page_end_loop)
+	/* The following diagram explains the comparison of misaligned strings.
+	   The bytes are shown in natural order. For little-endian, it is
+	   reversed in the registers. The "x" bytes are before the string.
+	   The "|" separates data that is loaded at one time.
+	   src1     | a a a a a a a a | b b b c c c c c | . . .
+	   src2     | x x x x x a a a   a a a a a b b b | c c c c c . . .
+
+	   After shifting in each step, the data looks like this:
+	                STEP_A              STEP_B              STEP_C
+	   data1    a a a a a a a a     b b b c c c c c     b b b c c c c c
+	   data2    a a a a a a a a     b b b 0 0 0 0 0     0 0 0 c c c c c
 
+	   The bytes with "0" are eliminated from the syndrome via mask.
+
+	   Align SRC2 down to 16 bytes. This way we can read 16 bytes at a
+	   time from SRC2. The comparison happens in 3 steps. After each step
+	   the loop can exit, or read from SRC1 or SRC2. */
+L(src1_aligned):
+	/* Calculate offset from 8 byte alignment to string start in bits. No
+	   need to mask offset since shifts are ignoring upper bits. */
+	lsl	offset, src2, #3
+	bic	src2, src2, #0xf
+	mov	mask, -1
+	neg	neg_offset, offset
 	ldr	data1, [src1], #8
-	ldr	data2, [src2], #8
-	sub	tmp1, data1, zeroones
-	orr	tmp2, data1, #REP8_7f
-	eor	diff, data1, data2	/* Non-zero if differences found.  */
-	bics	has_nul, tmp1, tmp2	/* Non-zero if NUL terminator.  */
-	ccmp	diff, #0, #0, eq
-	b.ne	L(not_limit)
-	subs	limit_wd, limit_wd, #1
-	b.pl	L(loop_misaligned)
+	ldp	tmp1, tmp2, [src2], #16
+	LS_BK	mask, mask, neg_offset
+	and	neg_offset, neg_offset, #63	/* Need actual value for cmp later. */
+	/* Skip the first compare if data in tmp1 is irrelevant. */
+	tbnz	offset, 6, L(misaligned_mid_loop)
 
-L(done_loop):
-	/* We found a difference or a NULL before the limit was reached.  */
-	and	limit, limit, #7
-	cbz	limit, L(not_limit)
-	/* Read the last word.  */
-	sub	src1, src1, 8
-	sub	src2, src2, 8
-	ldr	data1, [src1, limit]
-	ldr	data2, [src2, limit]
-	sub	tmp1, data1, zeroones
-	orr	tmp2, data1, #REP8_7f
+L(loop_misaligned):
+	/* STEP_A: Compare full 8 bytes when there is enough data from SRC2.*/
+	LS_FW	data2, tmp1, offset
+	LS_BK	tmp1, tmp2, neg_offset
+	subs	limit, limit, #8
+	orr	data2, data2, tmp1	/* 8 bytes from SRC2 combined from two regs.*/
+	sub	has_nul, data1, zeroones
 	eor	diff, data1, data2	/* Non-zero if differences found.  */
-	bics	has_nul, tmp1, tmp2	/* Non-zero if NUL terminator.  */
-	ccmp	diff, #0, #0, eq
-	b.ne	L(not_limit)
+	orr	tmp3, data1, #REP8_7f
+	csinv	endloop, diff, xzr, hi	/* If limit, set to all ones. */
+	bic	has_nul, has_nul, tmp3	/* Non-zero if NUL byte found in SRC1. */
+	orr	tmp3, endloop, has_nul
+	cbnz	tmp3, L(full_check)
+
+	ldr	data1, [src1], #8
+L(misaligned_mid_loop):
+	/* STEP_B: Compare first part of data1 to second part of tmp2. */
+	LS_FW	data2, tmp2, offset
+#ifdef __AARCH64EB__
+	/* For big-endian we do a byte reverse to avoid carry-propagation
+	problem described above. This way we can reuse the has_nul in the
+	next step and also use syndrome value trick at the end. */
+	rev	tmp3, data1
+	#define data1_fixed tmp3
+#else
+	#define data1_fixed data1
+#endif
+	sub	has_nul, data1_fixed, zeroones
+	orr	tmp3, data1_fixed, #REP8_7f
+	eor	diff, data2, data1	/* Non-zero if differences found.  */
+	bic	has_nul, has_nul, tmp3	/* Non-zero if NUL terminator.  */
+#ifdef __AARCH64EB__
+	rev	has_nul, has_nul
+#endif
+	cmp	limit, neg_offset, lsr #3
+	orr	syndrome, diff, has_nul
+	bic	syndrome, syndrome, mask	/* Ignore later bytes. */
+	csinv	tmp3, syndrome, xzr, hi	/* If limit, set to all ones. */
+	cbnz	tmp3, L(syndrome_check)
+
+	/* STEP_C: Compare second part of data1 to first part of tmp1. */
+	ldp	tmp1, tmp2, [src2], #16
+	cmp	limit, #8
+	LS_BK	data2, tmp1, neg_offset
+	eor	diff, data2, data1	/* Non-zero if differences found.  */
+	orr	syndrome, diff, has_nul
+	and	syndrome, syndrome, mask	/* Ignore earlier bytes. */
+	csinv	tmp3, syndrome, xzr, hi	/* If limit, set to all ones. */
+	cbnz	tmp3, L(syndrome_check)
+
+	ldr	data1, [src1], #8
+	sub	limit, limit, #8
+	b	L(loop_misaligned)
+
+#ifdef	__AARCH64EB__
+L(syndrome_check):
+	clz	pos, syndrome
+	cmp	pos, limit, lsl #3
+	b.lo	L(end_quick)
+#endif
 
 L(ret0):
 	mov	result, #0
 	ret
-
-SYM_FUNC_END_PI(strncmp)
-EXPORT_SYMBOL_NOHWKASAN(strncmp)
+SYM_FUNC_END(__pi_strncmp)
+SYM_FUNC_ALIAS_WEAK(strncmp, __pi_strncmp)
+EXPORT_SYMBOL_NOKASAN(strncmp)
diff --git a/arch/arm64/lib/strnlen.S b/arch/arm64/lib/strnlen.S
index b72913a99038..d5ac0e10a01d 100644
--- a/arch/arm64/lib/strnlen.S
+++ b/arch/arm64/lib/strnlen.S
@@ -47,7 +47,7 @@ limit_wd	.req	x14
 #define REP8_7f 0x7f7f7f7f7f7f7f7f
 #define REP8_80 0x8080808080808080
 
-SYM_FUNC_START_WEAK_PI(strnlen)
+SYM_FUNC_START(__pi_strnlen)
 	cbz	limit, .Lhit_limit
 	mov	zeroones, #REP8_01
 	bic	src, srcin, #15
@@ -156,5 +156,7 @@ CPU_LE( lsr	tmp2, tmp2, tmp4 )	/* Shift (tmp1 & 63).  */
 .Lhit_limit:
 	mov	len, limit
 	ret
-SYM_FUNC_END_PI(strnlen)
+SYM_FUNC_END(__pi_strnlen)
+
+SYM_FUNC_ALIAS_WEAK(strnlen, __pi_strnlen)
 EXPORT_SYMBOL_NOKASAN(strnlen)
diff --git a/arch/arm64/lib/strrchr.S b/arch/arm64/lib/strrchr.S
index 13132d1ed6d1..a5123cf0ce12 100644
--- a/arch/arm64/lib/strrchr.S
+++ b/arch/arm64/lib/strrchr.S
@@ -18,7 +18,7 @@
  * Returns:
  *	x0 - address of last occurrence of 'c' or 0
  */
-SYM_FUNC_START_WEAK_PI(strrchr)
+SYM_FUNC_START(__pi_strrchr)
 	mov	x3, #0
 	and	w1, w1, #0xff
 1:	ldrb	w2, [x0], #1
@@ -29,5 +29,6 @@ SYM_FUNC_START_WEAK_PI(strrchr)
 	b	1b
 2:	mov	x0, x3
 	ret
-SYM_FUNC_END_PI(strrchr)
+SYM_FUNC_END(__pi_strrchr)
+SYM_FUNC_ALIAS_WEAK(strrchr, __pi_strrchr)
 EXPORT_SYMBOL_NOKASAN(strrchr)
diff --git a/arch/arm64/lib/xor-neon.c b/arch/arm64/lib/xor-neon.c
index d189cf4e70ea..96b171995d19 100644
--- a/arch/arm64/lib/xor-neon.c
+++ b/arch/arm64/lib/xor-neon.c
@@ -10,8 +10,8 @@
 #include <linux/module.h>
 #include <asm/neon-intrinsics.h>
 
-void xor_arm64_neon_2(unsigned long bytes, unsigned long *p1,
-	unsigned long *p2)
+void xor_arm64_neon_2(unsigned long bytes, unsigned long * __restrict p1,
+	const unsigned long * __restrict p2)
 {
 	uint64_t *dp1 = (uint64_t *)p1;
 	uint64_t *dp2 = (uint64_t *)p2;
@@ -37,8 +37,9 @@ void xor_arm64_neon_2(unsigned long bytes, unsigned long *p1,
 	} while (--lines > 0);
 }
 
-void xor_arm64_neon_3(unsigned long bytes, unsigned long *p1,
-	unsigned long *p2, unsigned long *p3)
+void xor_arm64_neon_3(unsigned long bytes, unsigned long * __restrict p1,
+	const unsigned long * __restrict p2,
+	const unsigned long * __restrict p3)
 {
 	uint64_t *dp1 = (uint64_t *)p1;
 	uint64_t *dp2 = (uint64_t *)p2;
@@ -72,8 +73,10 @@ void xor_arm64_neon_3(unsigned long bytes, unsigned long *p1,
 	} while (--lines > 0);
 }
 
-void xor_arm64_neon_4(unsigned long bytes, unsigned long *p1,
-	unsigned long *p2, unsigned long *p3, unsigned long *p4)
+void xor_arm64_neon_4(unsigned long bytes, unsigned long * __restrict p1,
+	const unsigned long * __restrict p2,
+	const unsigned long * __restrict p3,
+	const unsigned long * __restrict p4)
 {
 	uint64_t *dp1 = (uint64_t *)p1;
 	uint64_t *dp2 = (uint64_t *)p2;
@@ -115,9 +118,11 @@ void xor_arm64_neon_4(unsigned long bytes, unsigned long *p1,
 	} while (--lines > 0);
 }
 
-void xor_arm64_neon_5(unsigned long bytes, unsigned long *p1,
-	unsigned long *p2, unsigned long *p3,
-	unsigned long *p4, unsigned long *p5)
+void xor_arm64_neon_5(unsigned long bytes, unsigned long * __restrict p1,
+	const unsigned long * __restrict p2,
+	const unsigned long * __restrict p3,
+	const unsigned long * __restrict p4,
+	const unsigned long * __restrict p5)
 {
 	uint64_t *dp1 = (uint64_t *)p1;
 	uint64_t *dp2 = (uint64_t *)p2;
@@ -186,8 +191,10 @@ static inline uint64x2_t eor3(uint64x2_t p, uint64x2_t q, uint64x2_t r)
 	return res;
 }
 
-static void xor_arm64_eor3_3(unsigned long bytes, unsigned long *p1,
-			     unsigned long *p2, unsigned long *p3)
+static void xor_arm64_eor3_3(unsigned long bytes,
+	unsigned long * __restrict p1,
+	const unsigned long * __restrict p2,
+	const unsigned long * __restrict p3)
 {
 	uint64_t *dp1 = (uint64_t *)p1;
 	uint64_t *dp2 = (uint64_t *)p2;
@@ -219,9 +226,11 @@ static void xor_arm64_eor3_3(unsigned long bytes, unsigned long *p1,
 	} while (--lines > 0);
 }
 
-static void xor_arm64_eor3_4(unsigned long bytes, unsigned long *p1,
-			     unsigned long *p2, unsigned long *p3,
-			     unsigned long *p4)
+static void xor_arm64_eor3_4(unsigned long bytes,
+	unsigned long * __restrict p1,
+	const unsigned long * __restrict p2,
+	const unsigned long * __restrict p3,
+	const unsigned long * __restrict p4)
 {
 	uint64_t *dp1 = (uint64_t *)p1;
 	uint64_t *dp2 = (uint64_t *)p2;
@@ -261,9 +270,12 @@ static void xor_arm64_eor3_4(unsigned long bytes, unsigned long *p1,
 	} while (--lines > 0);
 }
 
-static void xor_arm64_eor3_5(unsigned long bytes, unsigned long *p1,
-			     unsigned long *p2, unsigned long *p3,
-			     unsigned long *p4, unsigned long *p5)
+static void xor_arm64_eor3_5(unsigned long bytes,
+	unsigned long * __restrict p1,
+	const unsigned long * __restrict p2,
+	const unsigned long * __restrict p3,
+	const unsigned long * __restrict p4,
+	const unsigned long * __restrict p5)
 {
 	uint64_t *dp1 = (uint64_t *)p1;
 	uint64_t *dp2 = (uint64_t *)p2;
diff --git a/arch/arm64/mm/cache.S b/arch/arm64/mm/cache.S
index 7d0563db4201..0ea6cc25dc66 100644
--- a/arch/arm64/mm/cache.S
+++ b/arch/arm64/mm/cache.S
@@ -107,10 +107,11 @@ SYM_FUNC_END(icache_inval_pou)
  *	- start   - virtual start address of region
  *	- end     - virtual end address of region
  */
-SYM_FUNC_START_PI(dcache_clean_inval_poc)
+SYM_FUNC_START(__pi_dcache_clean_inval_poc)
 	dcache_by_line_op civac, sy, x0, x1, x2, x3
 	ret
-SYM_FUNC_END_PI(dcache_clean_inval_poc)
+SYM_FUNC_END(__pi_dcache_clean_inval_poc)
+SYM_FUNC_ALIAS(dcache_clean_inval_poc, __pi_dcache_clean_inval_poc)
 
 /*
  *	dcache_clean_pou(start, end)
@@ -140,7 +141,7 @@ SYM_FUNC_END(dcache_clean_pou)
  *	- start   - kernel start address of region
  *	- end     - kernel end address of region
  */
-SYM_FUNC_START_PI(dcache_inval_poc)
+SYM_FUNC_START(__pi_dcache_inval_poc)
 	dcache_line_size x2, x3
 	sub	x3, x2, #1
 	tst	x1, x3				// end cache line aligned?
@@ -158,7 +159,8 @@ SYM_FUNC_START_PI(dcache_inval_poc)
 	b.lo	2b
 	dsb	sy
 	ret
-SYM_FUNC_END_PI(dcache_inval_poc)
+SYM_FUNC_END(__pi_dcache_inval_poc)
+SYM_FUNC_ALIAS(dcache_inval_poc, __pi_dcache_inval_poc)
 
 /*
  *	dcache_clean_poc(start, end)
@@ -169,10 +171,11 @@ SYM_FUNC_END_PI(dcache_inval_poc)
  *	- start   - virtual start address of region
  *	- end     - virtual end address of region
  */
-SYM_FUNC_START_PI(dcache_clean_poc)
+SYM_FUNC_START(__pi_dcache_clean_poc)
 	dcache_by_line_op cvac, sy, x0, x1, x2, x3
 	ret
-SYM_FUNC_END_PI(dcache_clean_poc)
+SYM_FUNC_END(__pi_dcache_clean_poc)
+SYM_FUNC_ALIAS(dcache_clean_poc, __pi_dcache_clean_poc)
 
 /*
  *	dcache_clean_pop(start, end)
@@ -183,13 +186,14 @@ SYM_FUNC_END_PI(dcache_clean_poc)
  *	- start   - virtual start address of region
  *	- end     - virtual end address of region
  */
-SYM_FUNC_START_PI(dcache_clean_pop)
+SYM_FUNC_START(__pi_dcache_clean_pop)
 	alternative_if_not ARM64_HAS_DCPOP
 	b	dcache_clean_poc
 	alternative_else_nop_endif
 	dcache_by_line_op cvap, sy, x0, x1, x2, x3
 	ret
-SYM_FUNC_END_PI(dcache_clean_pop)
+SYM_FUNC_END(__pi_dcache_clean_pop)
+SYM_FUNC_ALIAS(dcache_clean_pop, __pi_dcache_clean_pop)
 
 /*
  *	__dma_flush_area(start, size)
@@ -199,11 +203,12 @@ SYM_FUNC_END_PI(dcache_clean_pop)
  *	- start   - virtual start address of region
  *	- size    - size in question
  */
-SYM_FUNC_START_PI(__dma_flush_area)
+SYM_FUNC_START(__pi___dma_flush_area)
 	add	x1, x0, x1
 	dcache_by_line_op civac, sy, x0, x1, x2, x3
 	ret
-SYM_FUNC_END_PI(__dma_flush_area)
+SYM_FUNC_END(__pi___dma_flush_area)
+SYM_FUNC_ALIAS(__dma_flush_area, __pi___dma_flush_area)
 
 /*
  *	__dma_map_area(start, size, dir)
@@ -211,12 +216,13 @@ SYM_FUNC_END_PI(__dma_flush_area)
  *	- size	- size of region
  *	- dir	- DMA direction
  */
-SYM_FUNC_START_PI(__dma_map_area)
+SYM_FUNC_START(__pi___dma_map_area)
 	add	x1, x0, x1
 	cmp	w2, #DMA_FROM_DEVICE
 	b.eq	__pi_dcache_inval_poc
 	b	__pi_dcache_clean_poc
-SYM_FUNC_END_PI(__dma_map_area)
+SYM_FUNC_END(__pi___dma_map_area)
+SYM_FUNC_ALIAS(__dma_map_area, __pi___dma_map_area)
 
 /*
  *	__dma_unmap_area(start, size, dir)
@@ -224,9 +230,10 @@ SYM_FUNC_END_PI(__dma_map_area)
  *	- size	- size of region
  *	- dir	- DMA direction
  */
-SYM_FUNC_START_PI(__dma_unmap_area)
+SYM_FUNC_START(__pi___dma_unmap_area)
 	add	x1, x0, x1
 	cmp	w2, #DMA_TO_DEVICE
 	b.ne	__pi_dcache_inval_poc
 	ret
-SYM_FUNC_END_PI(__dma_unmap_area)
+SYM_FUNC_END(__pi___dma_unmap_area)
+SYM_FUNC_ALIAS(__dma_unmap_area, __pi___dma_unmap_area)
diff --git a/arch/arm64/mm/flush.c b/arch/arm64/mm/flush.c
index 2aaf950b906c..a06c6ac770d4 100644
--- a/arch/arm64/mm/flush.c
+++ b/arch/arm64/mm/flush.c
@@ -52,6 +52,13 @@ void __sync_icache_dcache(pte_t pte)
 {
 	struct page *page = pte_page(pte);
 
+	/*
+	 * HugeTLB pages are always fully mapped, so only setting head page's
+	 * PG_dcache_clean flag is enough.
+	 */
+	if (PageHuge(page))
+		page = compound_head(page);
+
 	if (!test_bit(PG_dcache_clean, &page->flags)) {
 		sync_icache_aliases((unsigned long)page_address(page),
 				    (unsigned long)page_address(page) +
diff --git a/arch/arm64/mm/hugetlbpage.c b/arch/arm64/mm/hugetlbpage.c
index ffb9c229610a..cbace1c9e137 100644
--- a/arch/arm64/mm/hugetlbpage.c
+++ b/arch/arm64/mm/hugetlbpage.c
@@ -56,25 +56,34 @@ void __init arm64_hugetlb_cma_reserve(void)
 }
 #endif /* CONFIG_CMA */
 
-#ifdef CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION
-bool arch_hugetlb_migration_supported(struct hstate *h)
+static bool __hugetlb_valid_size(unsigned long size)
 {
-	size_t pagesize = huge_page_size(h);
-
-	switch (pagesize) {
+	switch (size) {
 #ifndef __PAGETABLE_PMD_FOLDED
 	case PUD_SIZE:
 		return pud_sect_supported();
 #endif
-	case PMD_SIZE:
 	case CONT_PMD_SIZE:
+	case PMD_SIZE:
 	case CONT_PTE_SIZE:
 		return true;
 	}
-	pr_warn("%s: unrecognized huge page size 0x%lx\n",
-			__func__, pagesize);
+
 	return false;
 }
+
+#ifdef CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION
+bool arch_hugetlb_migration_supported(struct hstate *h)
+{
+	size_t pagesize = huge_page_size(h);
+
+	if (!__hugetlb_valid_size(pagesize)) {
+		pr_warn("%s: unrecognized huge page size 0x%lx\n",
+			__func__, pagesize);
+		return false;
+	}
+	return true;
+}
 #endif
 
 int pmd_huge(pmd_t pmd)
@@ -347,6 +356,7 @@ pte_t arch_make_huge_pte(pte_t entry, unsigned int shift, vm_flags_t flags)
 {
 	size_t pagesize = 1UL << shift;
 
+	entry = pte_mkhuge(entry);
 	if (pagesize == CONT_PTE_SIZE) {
 		entry = pte_mkcont(entry);
 	} else if (pagesize == CONT_PMD_SIZE) {
@@ -506,16 +516,5 @@ arch_initcall(hugetlbpage_init);
 
 bool __init arch_hugetlb_valid_size(unsigned long size)
 {
-	switch (size) {
-#ifndef __PAGETABLE_PMD_FOLDED
-	case PUD_SIZE:
-		return pud_sect_supported();
-#endif
-	case CONT_PMD_SIZE:
-	case PMD_SIZE:
-	case CONT_PTE_SIZE:
-		return true;
-	}
-
-	return false;
+	return __hugetlb_valid_size(size);
 }
diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c
index db63cc885771..9e26ec80d317 100644
--- a/arch/arm64/mm/init.c
+++ b/arch/arm64/mm/init.c
@@ -61,8 +61,34 @@ EXPORT_SYMBOL(memstart_addr);
  * unless restricted on specific platforms (e.g. 30-bit on Raspberry Pi 4).
  * In such case, ZONE_DMA32 covers the rest of the 32-bit addressable memory,
  * otherwise it is empty.
+ *
+ * Memory reservation for crash kernel either done early or deferred
+ * depending on DMA memory zones configs (ZONE_DMA) --
+ *
+ * In absence of ZONE_DMA configs arm64_dma_phys_limit initialized
+ * here instead of max_zone_phys().  This lets early reservation of
+ * crash kernel memory which has a dependency on arm64_dma_phys_limit.
+ * Reserving memory early for crash kernel allows linear creation of block
+ * mappings (greater than page-granularity) for all the memory bank rangs.
+ * In this scheme a comparatively quicker boot is observed.
+ *
+ * If ZONE_DMA configs are defined, crash kernel memory reservation
+ * is delayed until DMA zone memory range size initilazation performed in
+ * zone_sizes_init().  The defer is necessary to steer clear of DMA zone
+ * memory range to avoid overlap allocation.  So crash kernel memory boundaries
+ * are not known when mapping all bank memory ranges, which otherwise means
+ * not possible to exclude crash kernel range from creating block mappings
+ * so page-granularity mappings are created for the entire memory range.
+ * Hence a slightly slower boot is observed.
+ *
+ * Note: Page-granularity mapppings are necessary for crash kernel memory
+ * range for shrinking its size via /sys/kernel/kexec_crash_size interface.
  */
-phys_addr_t arm64_dma_phys_limit __ro_after_init;
+#if IS_ENABLED(CONFIG_ZONE_DMA) || IS_ENABLED(CONFIG_ZONE_DMA32)
+phys_addr_t __ro_after_init arm64_dma_phys_limit;
+#else
+phys_addr_t __ro_after_init arm64_dma_phys_limit = PHYS_MASK + 1;
+#endif
 
 #ifdef CONFIG_KEXEC_CORE
 /*
@@ -153,8 +179,6 @@ static void __init zone_sizes_init(unsigned long min, unsigned long max)
 	if (!arm64_dma_phys_limit)
 		arm64_dma_phys_limit = dma32_phys_limit;
 #endif
-	if (!arm64_dma_phys_limit)
-		arm64_dma_phys_limit = PHYS_MASK + 1;
 	max_zone_pfns[ZONE_NORMAL] = max;
 
 	free_area_init(max_zone_pfns);
@@ -315,6 +339,9 @@ void __init arm64_memblock_init(void)
 
 	early_init_fdt_scan_reserved_mem();
 
+	if (!IS_ENABLED(CONFIG_ZONE_DMA) && !IS_ENABLED(CONFIG_ZONE_DMA32))
+		reserve_crashkernel();
+
 	high_memory = __va(memblock_end_of_DRAM() - 1) + 1;
 }
 
@@ -361,7 +388,8 @@ void __init bootmem_init(void)
 	 * request_standard_resources() depends on crashkernel's memory being
 	 * reserved, so do it here.
 	 */
-	reserve_crashkernel();
+	if (IS_ENABLED(CONFIG_ZONE_DMA) || IS_ENABLED(CONFIG_ZONE_DMA32))
+		reserve_crashkernel();
 
 	memblock_dump_all();
 }
diff --git a/arch/arm64/mm/mmap.c b/arch/arm64/mm/mmap.c
index a38f54cd638c..77ada00280d9 100644
--- a/arch/arm64/mm/mmap.c
+++ b/arch/arm64/mm/mmap.c
@@ -7,8 +7,10 @@
 
 #include <linux/io.h>
 #include <linux/memblock.h>
+#include <linux/mm.h>
 #include <linux/types.h>
 
+#include <asm/cpufeature.h>
 #include <asm/page.h>
 
 /*
@@ -38,3 +40,18 @@ int valid_mmap_phys_addr_range(unsigned long pfn, size_t size)
 {
 	return !(((pfn << PAGE_SHIFT) + size) & ~PHYS_MASK);
 }
+
+static int __init adjust_protection_map(void)
+{
+	/*
+	 * With Enhanced PAN we can honour the execute-only permissions as
+	 * there is no PAN override with such mappings.
+	 */
+	if (cpus_have_const_cap(ARM64_HAS_EPAN)) {
+		protection_map[VM_EXEC] = PAGE_EXECONLY;
+		protection_map[VM_EXEC | VM_SHARED] = PAGE_EXECONLY;
+	}
+
+	return 0;
+}
+arch_initcall(adjust_protection_map);
diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c
index acfae9b41cc8..626ec32873c6 100644
--- a/arch/arm64/mm/mmu.c
+++ b/arch/arm64/mm/mmu.c
@@ -17,6 +17,7 @@
 #include <linux/mman.h>
 #include <linux/nodemask.h>
 #include <linux/memblock.h>
+#include <linux/memremap.h>
 #include <linux/memory.h>
 #include <linux/fs.h>
 #include <linux/io.h>
@@ -63,6 +64,7 @@ static pmd_t bm_pmd[PTRS_PER_PMD] __page_aligned_bss __maybe_unused;
 static pud_t bm_pud[PTRS_PER_PUD] __page_aligned_bss __maybe_unused;
 
 static DEFINE_SPINLOCK(swapper_pgdir_lock);
+static DEFINE_MUTEX(fixmap_lock);
 
 void set_swapper_pgd(pgd_t *pgdp, pgd_t pgd)
 {
@@ -294,18 +296,6 @@ static void alloc_init_cont_pmd(pud_t *pudp, unsigned long addr,
 	} while (addr = next, addr != end);
 }
 
-static inline bool use_1G_block(unsigned long addr, unsigned long next,
-			unsigned long phys)
-{
-	if (PAGE_SHIFT != 12)
-		return false;
-
-	if (((addr | next | phys) & ~PUD_MASK) != 0)
-		return false;
-
-	return true;
-}
-
 static void alloc_init_pud(pgd_t *pgdp, unsigned long addr, unsigned long end,
 			   phys_addr_t phys, pgprot_t prot,
 			   phys_addr_t (*pgtable_alloc)(int),
@@ -329,6 +319,12 @@ static void alloc_init_pud(pgd_t *pgdp, unsigned long addr, unsigned long end,
 	}
 	BUG_ON(p4d_bad(p4d));
 
+	/*
+	 * No need for locking during early boot. And it doesn't work as
+	 * expected with KASLR enabled.
+	 */
+	if (system_state != SYSTEM_BOOTING)
+		mutex_lock(&fixmap_lock);
 	pudp = pud_set_fixmap_offset(p4dp, addr);
 	do {
 		pud_t old_pud = READ_ONCE(*pudp);
@@ -338,7 +334,8 @@ static void alloc_init_pud(pgd_t *pgdp, unsigned long addr, unsigned long end,
 		/*
 		 * For 4K granule only, attempt to put down a 1GB block
 		 */
-		if (use_1G_block(addr, next, phys) &&
+		if (pud_sect_supported() &&
+		   ((addr | next | phys) & ~PUD_MASK) == 0 &&
 		    (flags & NO_BLOCK_MAPPINGS) == 0) {
 			pud_set_huge(pudp, phys, prot);
 
@@ -359,6 +356,8 @@ static void alloc_init_pud(pgd_t *pgdp, unsigned long addr, unsigned long end,
 	} while (pudp++, addr = next, addr != end);
 
 	pud_clear_fixmap();
+	if (system_state != SYSTEM_BOOTING)
+		mutex_unlock(&fixmap_lock);
 }
 
 static void __create_pgd_mapping(pgd_t *pgdir, phys_addr_t phys,
@@ -517,7 +516,7 @@ static void __init map_mem(pgd_t *pgdp)
 	 */
 	BUILD_BUG_ON(pgd_index(direct_map_end - 1) == pgd_index(direct_map_end));
 
-	if (can_set_direct_map() || crash_mem_map || IS_ENABLED(CONFIG_KFENCE))
+	if (can_set_direct_map() || IS_ENABLED(CONFIG_KFENCE))
 		flags |= NO_BLOCK_MAPPINGS | NO_CONT_MAPPINGS;
 
 	/*
@@ -528,6 +527,17 @@ static void __init map_mem(pgd_t *pgdp)
 	 */
 	memblock_mark_nomap(kernel_start, kernel_end - kernel_start);
 
+#ifdef CONFIG_KEXEC_CORE
+	if (crash_mem_map) {
+		if (IS_ENABLED(CONFIG_ZONE_DMA) ||
+		    IS_ENABLED(CONFIG_ZONE_DMA32))
+			flags |= NO_BLOCK_MAPPINGS | NO_CONT_MAPPINGS;
+		else if (crashk_res.end)
+			memblock_mark_nomap(crashk_res.start,
+			    resource_size(&crashk_res));
+	}
+#endif
+
 	/* map all the memory banks */
 	for_each_mem_range(i, &start, &end) {
 		if (start >= end)
@@ -554,6 +564,25 @@ static void __init map_mem(pgd_t *pgdp)
 	__map_memblock(pgdp, kernel_start, kernel_end,
 		       PAGE_KERNEL, NO_CONT_MAPPINGS);
 	memblock_clear_nomap(kernel_start, kernel_end - kernel_start);
+
+	/*
+	 * Use page-level mappings here so that we can shrink the region
+	 * in page granularity and put back unused memory to buddy system
+	 * through /sys/kernel/kexec_crash_size interface.
+	 */
+#ifdef CONFIG_KEXEC_CORE
+	if (crash_mem_map &&
+	    !IS_ENABLED(CONFIG_ZONE_DMA) && !IS_ENABLED(CONFIG_ZONE_DMA32)) {
+		if (crashk_res.end) {
+			__map_memblock(pgdp, crashk_res.start,
+				       crashk_res.end + 1,
+				       PAGE_KERNEL,
+				       NO_BLOCK_MAPPINGS | NO_CONT_MAPPINGS);
+			memblock_clear_nomap(crashk_res.start,
+					     resource_size(&crashk_res));
+		}
+	}
+#endif
 }
 
 void mark_rodata_ro(void)
@@ -617,6 +646,8 @@ early_param("rodata", parse_rodata);
 #ifdef CONFIG_UNMAP_KERNEL_AT_EL0
 static int __init map_entry_trampoline(void)
 {
+	int i;
+
 	pgprot_t prot = rodata_enabled ? PAGE_KERNEL_ROX : PAGE_KERNEL_EXEC;
 	phys_addr_t pa_start = __pa_symbol(__entry_tramp_text_start);
 
@@ -625,11 +656,15 @@ static int __init map_entry_trampoline(void)
 
 	/* Map only the text into the trampoline page table */
 	memset(tramp_pg_dir, 0, PGD_SIZE);
-	__create_pgd_mapping(tramp_pg_dir, pa_start, TRAMP_VALIAS, PAGE_SIZE,
-			     prot, __pgd_pgtable_alloc, 0);
+	__create_pgd_mapping(tramp_pg_dir, pa_start, TRAMP_VALIAS,
+			     entry_tramp_text_size(), prot,
+			     __pgd_pgtable_alloc, NO_BLOCK_MAPPINGS);
 
 	/* Map both the text and data into the kernel page table */
-	__set_fixmap(FIX_ENTRY_TRAMP_TEXT, pa_start, prot);
+	for (i = 0; i < DIV_ROUND_UP(entry_tramp_text_size(), PAGE_SIZE); i++)
+		__set_fixmap(FIX_ENTRY_TRAMP_TEXT1 - i,
+			     pa_start + i * PAGE_SIZE, prot);
+
 	if (IS_ENABLED(CONFIG_RANDOMIZE_BASE)) {
 		extern char __entry_tramp_data_start[];
 
diff --git a/arch/arm64/mm/mteswap.c b/arch/arm64/mm/mteswap.c
index 7c4ef56265ee..a9e50e930484 100644
--- a/arch/arm64/mm/mteswap.c
+++ b/arch/arm64/mm/mteswap.c
@@ -12,7 +12,7 @@ static DEFINE_XARRAY(mte_pages);
 void *mte_allocate_tag_storage(void)
 {
 	/* tags granule is 16 bytes, 2 tags stored per byte */
-	return kmalloc(PAGE_SIZE / 16 / 2, GFP_KERNEL);
+	return kmalloc(MTE_PAGE_TAG_STORAGE, GFP_KERNEL);
 }
 
 void mte_free_tag_storage(char *storage)
diff --git a/arch/arm64/mm/proc.S b/arch/arm64/mm/proc.S
index d35c90d2e47a..50bbed947bec 100644
--- a/arch/arm64/mm/proc.S
+++ b/arch/arm64/mm/proc.S
@@ -46,7 +46,7 @@
 #endif
 
 #ifdef CONFIG_KASAN_HW_TAGS
-#define TCR_MTE_FLAGS SYS_TCR_EL1_TCMA1 | TCR_TBI1 | TCR_TBID1
+#define TCR_MTE_FLAGS TCR_TCMA1 | TCR_TBI1 | TCR_TBID1
 #else
 /*
  * The mte_zero_clear_page_tags() implementation uses DC GZVA, which relies on
diff --git a/arch/arm64/net/bpf_jit.h b/arch/arm64/net/bpf_jit.h
index cc0cf0f5c7c3..9d9250c7cc72 100644
--- a/arch/arm64/net/bpf_jit.h
+++ b/arch/arm64/net/bpf_jit.h
@@ -89,9 +89,16 @@
 #define A64_STXR(sf, Rt, Rn, Rs) \
 	A64_LSX(sf, Rt, Rn, Rs, STORE_EX)
 
-/* LSE atomics */
+/*
+ * LSE atomics
+ *
+ * STADD is simply encoded as an alias for LDADD with XZR as
+ * the destination register.
+ */
 #define A64_STADD(sf, Rn, Rs) \
-	aarch64_insn_gen_stadd(Rn, Rs, A64_SIZE(sf))
+	aarch64_insn_gen_atomic_ld_op(A64_ZR, Rn, Rs, \
+		A64_SIZE(sf), AARCH64_INSN_MEM_ATOMIC_ADD, \
+		AARCH64_INSN_MEM_ORDER_NONE)
 
 /* Add/subtract (immediate) */
 #define A64_ADDSUB_IMM(sf, Rd, Rn, imm12, type) \
diff --git a/arch/arm64/tools/Makefile b/arch/arm64/tools/Makefile
index 932b4fe5c768..cf1307188150 100644
--- a/arch/arm64/tools/Makefile
+++ b/arch/arm64/tools/Makefile
@@ -5,18 +5,14 @@ kapi := $(gen)/asm
 
 kapi-hdrs-y := $(kapi)/cpucaps.h
 
-targets += $(addprefix ../../../,$(gen-y) $(kapi-hdrs-y))
+targets += $(addprefix ../../../, $(kapi-hdrs-y))
 
 PHONY += kapi
 
-kapi:   $(kapi-hdrs-y) $(gen-y)
-
-# Create output directory if not already present
-_dummy := $(shell [ -d '$(kapi)' ] || mkdir -p '$(kapi)')
+kapi:   $(kapi-hdrs-y)
 
 quiet_cmd_gen_cpucaps = GEN     $@
-      cmd_gen_cpucaps = mkdir -p $(dir $@) && \
-                     $(AWK) -f $(filter-out $(PHONY),$^) > $@
+      cmd_gen_cpucaps = mkdir -p $(dir $@); $(AWK) -f $(real-prereqs) > $@
 
 $(kapi)/cpucaps.h: $(src)/gen-cpucaps.awk $(src)/cpucaps FORCE
 	$(call if_changed,gen_cpucaps)
diff --git a/arch/arm64/tools/cpucaps b/arch/arm64/tools/cpucaps
index e7719e8f18de..3ed418f70e3b 100644
--- a/arch/arm64/tools/cpucaps
+++ b/arch/arm64/tools/cpucaps
@@ -7,7 +7,8 @@ BTI
 HAS_32BIT_EL0_DO_NOT_USE
 HAS_32BIT_EL1
 HAS_ADDRESS_AUTH
-HAS_ADDRESS_AUTH_ARCH
+HAS_ADDRESS_AUTH_ARCH_QARMA3
+HAS_ADDRESS_AUTH_ARCH_QARMA5
 HAS_ADDRESS_AUTH_IMP_DEF
 HAS_AMU_EXTN
 HAS_ARMv8_4_TTL
@@ -21,7 +22,8 @@ HAS_E0PD
 HAS_ECV
 HAS_EPAN
 HAS_GENERIC_AUTH
-HAS_GENERIC_AUTH_ARCH
+HAS_GENERIC_AUTH_ARCH_QARMA3
+HAS_GENERIC_AUTH_ARCH_QARMA5
 HAS_GENERIC_AUTH_IMP_DEF
 HAS_IRQ_PRIO_MASKING
 HAS_LDAPR
@@ -44,6 +46,7 @@ MTE_ASYMM
 SPECTRE_V2
 SPECTRE_V3A
 SPECTRE_V4
+SPECTRE_BHB
 SSBS
 SVE
 UNMAP_KERNEL_AT_EL0
@@ -55,9 +58,10 @@ WORKAROUND_1418040
 WORKAROUND_1463225
 WORKAROUND_1508412
 WORKAROUND_1542419
-WORKAROUND_2064142
-WORKAROUND_2038923
 WORKAROUND_1902691
+WORKAROUND_2038923
+WORKAROUND_2064142
+WORKAROUND_2077057
 WORKAROUND_TRBE_OVERWRITE_FILL_MODE
 WORKAROUND_TSB_FLUSH_FAILURE
 WORKAROUND_TRBE_WRITE_OUT_OF_RANGE
diff --git a/arch/csky/Kconfig b/arch/csky/Kconfig
index 132f43f12dd8..75ef86605d69 100644
--- a/arch/csky/Kconfig
+++ b/arch/csky/Kconfig
@@ -79,7 +79,6 @@ config CSKY
 	select PCI_DOMAINS_GENERIC if PCI
 	select PCI_SYSCALL if PCI
 	select PCI_MSI if PCI
-	select SET_FS
 	select TRACE_IRQFLAGS_SUPPORT
 
 config LOCKDEP_SUPPORT
diff --git a/arch/csky/include/asm/pgtable.h b/arch/csky/include/asm/pgtable.h
index 151607ed5158..bbe245117777 100644
--- a/arch/csky/include/asm/pgtable.h
+++ b/arch/csky/include/asm/pgtable.h
@@ -30,6 +30,7 @@
 #define pgd_ERROR(e) \
 	pr_err("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
 
+#define pmd_pfn(pmd)	(pmd_phys(pmd) >> PAGE_SHIFT)
 #define pmd_page(pmd)	(pfn_to_page(pmd_phys(pmd) >> PAGE_SHIFT))
 #define pte_clear(mm, addr, ptep)	set_pte((ptep), \
 	(((unsigned int) addr >= PAGE_OFFSET) ? __pte(_PAGE_GLOBAL) : __pte(0)))
diff --git a/arch/csky/include/asm/processor.h b/arch/csky/include/asm/processor.h
index 817dd60ff152..688c7548b559 100644
--- a/arch/csky/include/asm/processor.h
+++ b/arch/csky/include/asm/processor.h
@@ -4,7 +4,6 @@
 #define __ASM_CSKY_PROCESSOR_H
 
 #include <linux/bitops.h>
-#include <asm/segment.h>
 #include <asm/ptrace.h>
 #include <asm/current.h>
 #include <asm/cache.h>
@@ -59,7 +58,6 @@ struct thread_struct {
  */
 #define start_thread(_regs, _pc, _usp)					\
 do {									\
-	set_fs(USER_DS); /* reads from user space */			\
 	(_regs)->pc = (_pc);						\
 	(_regs)->regs[1] = 0; /* ABIV1 is R7, uClibc_main rtdl arg */	\
 	(_regs)->regs[2] = 0;						\
diff --git a/arch/csky/include/asm/segment.h b/arch/csky/include/asm/segment.h
deleted file mode 100644
index 5bc1cc62b87f..000000000000
--- a/arch/csky/include/asm/segment.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-
-#ifndef __ASM_CSKY_SEGMENT_H
-#define __ASM_CSKY_SEGMENT_H
-
-typedef struct {
-	unsigned long seg;
-} mm_segment_t;
-
-#endif /* __ASM_CSKY_SEGMENT_H */
diff --git a/arch/csky/include/asm/thread_info.h b/arch/csky/include/asm/thread_info.h
index 8c349a8f904d..b5ed788f0c68 100644
--- a/arch/csky/include/asm/thread_info.h
+++ b/arch/csky/include/asm/thread_info.h
@@ -16,7 +16,6 @@ struct thread_info {
 	unsigned long		flags;
 	int			preempt_count;
 	unsigned long		tp_value;
-	mm_segment_t		addr_limit;
 	struct restart_block	restart_block;
 	struct pt_regs		*regs;
 	unsigned int		cpu;
@@ -26,7 +25,6 @@ struct thread_info {
 {						\
 	.task		= &tsk,			\
 	.preempt_count  = INIT_PREEMPT_COUNT,	\
-	.addr_limit     = KERNEL_DS,		\
 	.cpu		= 0,			\
 	.restart_block = {			\
 		.fn = do_no_restart_syscall,	\
diff --git a/arch/csky/include/asm/uaccess.h b/arch/csky/include/asm/uaccess.h
index c40f06ee8d3e..2e927c21d8a1 100644
--- a/arch/csky/include/asm/uaccess.h
+++ b/arch/csky/include/asm/uaccess.h
@@ -3,17 +3,6 @@
 #ifndef __ASM_CSKY_UACCESS_H
 #define __ASM_CSKY_UACCESS_H
 
-#define user_addr_max() \
-	(uaccess_kernel() ? KERNEL_DS.seg : get_fs().seg)
-
-static inline int __access_ok(unsigned long addr, unsigned long size)
-{
-	unsigned long limit = current_thread_info()->addr_limit.seg;
-
-	return ((addr < limit) && ((addr + size) < limit));
-}
-#define __access_ok __access_ok
-
 /*
  * __put_user_fn
  */
@@ -209,7 +198,6 @@ unsigned long raw_copy_to_user(void *to, const void *from, unsigned long n);
 unsigned long __clear_user(void __user *to, unsigned long n);
 #define __clear_user __clear_user
 
-#include <asm/segment.h>
 #include <asm-generic/uaccess.h>
 
 #endif /* __ASM_CSKY_UACCESS_H */
diff --git a/arch/csky/kernel/asm-offsets.c b/arch/csky/kernel/asm-offsets.c
index 1cbcba4b0dd1..d1e903579473 100644
--- a/arch/csky/kernel/asm-offsets.c
+++ b/arch/csky/kernel/asm-offsets.c
@@ -25,7 +25,6 @@ int main(void)
 	/* offsets into the thread_info struct */
 	DEFINE(TINFO_FLAGS,       offsetof(struct thread_info, flags));
 	DEFINE(TINFO_PREEMPT,     offsetof(struct thread_info, preempt_count));
-	DEFINE(TINFO_ADDR_LIMIT,  offsetof(struct thread_info, addr_limit));
 	DEFINE(TINFO_TP_VALUE,   offsetof(struct thread_info, tp_value));
 	DEFINE(TINFO_TASK,        offsetof(struct thread_info, task));
 
diff --git a/arch/csky/kernel/perf_callchain.c b/arch/csky/kernel/perf_callchain.c
index 92057de08f4f..1612f4354087 100644
--- a/arch/csky/kernel/perf_callchain.c
+++ b/arch/csky/kernel/perf_callchain.c
@@ -49,7 +49,7 @@ static unsigned long user_backtrace(struct perf_callchain_entry_ctx *entry,
 {
 	struct stackframe buftail;
 	unsigned long lr = 0;
-	unsigned long *user_frame_tail = (unsigned long *)fp;
+	unsigned long __user *user_frame_tail = (unsigned long __user *)fp;
 
 	/* Check accessibility of one struct frame_tail beyond */
 	if (!access_ok(user_frame_tail, sizeof(buftail)))
diff --git a/arch/csky/kernel/signal.c b/arch/csky/kernel/signal.c
index c7b763d2f526..8867ddf3e6c7 100644
--- a/arch/csky/kernel/signal.c
+++ b/arch/csky/kernel/signal.c
@@ -136,7 +136,7 @@ static inline void __user *get_sigframe(struct ksignal *ksig,
 static int
 setup_rt_frame(struct ksignal *ksig, sigset_t *set, struct pt_regs *regs)
 {
-	struct rt_sigframe *frame;
+	struct rt_sigframe __user *frame;
 	int err = 0;
 
 	frame = get_sigframe(ksig, regs, sizeof(*frame));
diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig
index 3e3e0f16f7e0..fe48c4f26cc8 100644
--- a/arch/h8300/Kconfig
+++ b/arch/h8300/Kconfig
@@ -24,7 +24,6 @@ config H8300
 	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_HASH
 	select CPU_NO_EFFICIENT_FFS
-	select SET_FS
 	select UACCESS_MEMCPY
 
 config CPU_BIG_ENDIAN
diff --git a/arch/h8300/include/asm/processor.h b/arch/h8300/include/asm/processor.h
index 141a23eb62b7..ba171aa4dacb 100644
--- a/arch/h8300/include/asm/processor.h
+++ b/arch/h8300/include/asm/processor.h
@@ -13,7 +13,6 @@
 #define __ASM_H8300_PROCESSOR_H
 
 #include <linux/compiler.h>
-#include <asm/segment.h>
 #include <asm/ptrace.h>
 #include <asm/current.h>
 
diff --git a/arch/h8300/include/asm/segment.h b/arch/h8300/include/asm/segment.h
deleted file mode 100644
index 37950725d9b9..000000000000
--- a/arch/h8300/include/asm/segment.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _H8300_SEGMENT_H
-#define _H8300_SEGMENT_H
-
-/* define constants */
-#define USER_DATA     (1)
-#ifndef __USER_DS
-#define __USER_DS     (USER_DATA)
-#endif
-#define USER_PROGRAM  (2)
-#define SUPER_DATA    (3)
-#ifndef __KERNEL_DS
-#define __KERNEL_DS   (SUPER_DATA)
-#endif
-#define SUPER_PROGRAM (4)
-
-#ifndef __ASSEMBLY__
-
-typedef struct {
-	unsigned long seg;
-} mm_segment_t;
-
-#define MAKE_MM_SEG(s)	((mm_segment_t) { (s) })
-#define USER_DS		MAKE_MM_SEG(__USER_DS)
-#define KERNEL_DS	MAKE_MM_SEG(__KERNEL_DS)
-
-/*
- * Get/set the SFC/DFC registers for MOVES instructions
- */
-
-static inline mm_segment_t get_fs(void)
-{
-	return USER_DS;
-}
-
-#define uaccess_kernel()	(get_fs().seg == KERNEL_DS.seg)
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* _H8300_SEGMENT_H */
diff --git a/arch/h8300/include/asm/thread_info.h b/arch/h8300/include/asm/thread_info.h
index a518214d4ddd..ff2d873749a4 100644
--- a/arch/h8300/include/asm/thread_info.h
+++ b/arch/h8300/include/asm/thread_info.h
@@ -10,7 +10,6 @@
 #define _ASM_THREAD_INFO_H
 
 #include <asm/page.h>
-#include <asm/segment.h>
 
 #ifdef __KERNEL__
 
@@ -31,7 +30,6 @@ struct thread_info {
 	unsigned long	   flags;		/* low level flags */
 	int		   cpu;			/* cpu we're on */
 	int		   preempt_count;	/* 0 => preemptable, <0 => BUG */
-	mm_segment_t		addr_limit;
 };
 
 /*
@@ -43,7 +41,6 @@ struct thread_info {
 	.flags =	0,			\
 	.cpu =		0,			\
 	.preempt_count = INIT_PREEMPT_COUNT,	\
-	.addr_limit	= KERNEL_DS,		\
 }
 
 /* how to get the thread information struct from C */
diff --git a/arch/h8300/include/uapi/asm/signal.h b/arch/h8300/include/uapi/asm/signal.h
index 2cd0dce2b6a6..1165481f80f6 100644
--- a/arch/h8300/include/uapi/asm/signal.h
+++ b/arch/h8300/include/uapi/asm/signal.h
@@ -85,7 +85,7 @@ struct sigaction {
 typedef struct sigaltstack {
 	void *ss_sp;
 	int ss_flags;
-	size_t ss_size;
+	__kernel_size_t ss_size;
 } stack_t;
 
 
diff --git a/arch/h8300/kernel/entry.S b/arch/h8300/kernel/entry.S
index c6e289b5f1f2..42db87c17917 100644
--- a/arch/h8300/kernel/entry.S
+++ b/arch/h8300/kernel/entry.S
@@ -17,7 +17,6 @@
 #include <linux/sys.h>
 #include <asm/unistd.h>
 #include <asm/setup.h>
-#include <asm/segment.h>
 #include <asm/linkage.h>
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
diff --git a/arch/h8300/kernel/head_ram.S b/arch/h8300/kernel/head_ram.S
index dbf8429f5fab..489462f0ee57 100644
--- a/arch/h8300/kernel/head_ram.S
+++ b/arch/h8300/kernel/head_ram.S
@@ -4,7 +4,6 @@
 #include <linux/init.h>
 #include <asm/unistd.h>
 #include <asm/setup.h>
-#include <asm/segment.h>
 #include <asm/linkage.h>
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
diff --git a/arch/h8300/mm/init.c b/arch/h8300/mm/init.c
index f7bf4693e3b2..9fa13312720a 100644
--- a/arch/h8300/mm/init.c
+++ b/arch/h8300/mm/init.c
@@ -34,7 +34,6 @@
 #include <linux/gfp.h>
 
 #include <asm/setup.h>
-#include <asm/segment.h>
 #include <asm/page.h>
 #include <asm/sections.h>
 
@@ -71,11 +70,6 @@ void __init paging_init(void)
 		panic("%s: Failed to allocate %lu bytes align=0x%lx\n",
 		      __func__, PAGE_SIZE, PAGE_SIZE);
 
-	/*
-	 * Set up SFC/DFC registers (user data space).
-	 */
-	set_fs(USER_DS);
-
 	pr_debug("before free_area_init\n");
 
 	pr_debug("free_area_init -> start_mem is %#lx\nvirtual_end is %#lx\n",
diff --git a/arch/h8300/mm/memory.c b/arch/h8300/mm/memory.c
index 4a60e2b5eb96..c950571064d2 100644
--- a/arch/h8300/mm/memory.c
+++ b/arch/h8300/mm/memory.c
@@ -24,7 +24,6 @@
 #include <linux/types.h>
 
 #include <asm/setup.h>
-#include <asm/segment.h>
 #include <asm/page.h>
 #include <asm/traps.h>
 #include <asm/io.h>
diff --git a/arch/hexagon/Kconfig b/arch/hexagon/Kconfig
index 15dd8f38b698..54eadf265178 100644
--- a/arch/hexagon/Kconfig
+++ b/arch/hexagon/Kconfig
@@ -30,7 +30,6 @@ config HEXAGON
 	select GENERIC_CLOCKEVENTS_BROADCAST
 	select MODULES_USE_ELF_RELA
 	select GENERIC_CPU_DEVICES
-	select SET_FS
 	select ARCH_WANT_LD_ORPHAN_WARN
 	select TRACE_IRQFLAGS_SUPPORT
 	help
diff --git a/arch/hexagon/include/asm/pgtable.h b/arch/hexagon/include/asm/pgtable.h
index 18cd6ea9ab23..0610724d6a28 100644
--- a/arch/hexagon/include/asm/pgtable.h
+++ b/arch/hexagon/include/asm/pgtable.h
@@ -236,6 +236,11 @@ static inline int pmd_bad(pmd_t pmd)
 }
 
 /*
+ * pmd_pfn - converts a PMD entry to a page frame number
+ */
+#define pmd_pfn(pmd)  (pmd_val(pmd) >> PAGE_SHIFT)
+
+/*
  * pmd_page - converts a PMD entry to a page pointer
  */
 #define pmd_page(pmd)  (pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT))
diff --git a/arch/hexagon/include/asm/thread_info.h b/arch/hexagon/include/asm/thread_info.h
index 535976665bf0..e90f280b9ce3 100644
--- a/arch/hexagon/include/asm/thread_info.h
+++ b/arch/hexagon/include/asm/thread_info.h
@@ -22,10 +22,6 @@
 
 #ifndef __ASSEMBLY__
 
-typedef struct {
-	unsigned long seg;
-} mm_segment_t;
-
 /*
  * This is union'd with the "bottom" of the kernel stack.
  * It keeps track of thread info which is handy for routines
@@ -37,7 +33,6 @@ struct thread_info {
 	unsigned long		flags;          /* low level flags */
 	__u32                   cpu;            /* current cpu */
 	int                     preempt_count;  /* 0=>preemptible,<0=>BUG */
-	mm_segment_t            addr_limit;     /* segmentation sux */
 	/*
 	 * used for syscalls somehow;
 	 * seems to have a function pointer and four arguments
@@ -66,7 +61,6 @@ struct thread_info {
 	.flags          = 0,                    \
 	.cpu            = 0,                    \
 	.preempt_count  = 1,                    \
-	.addr_limit     = KERNEL_DS,            \
 	.sp = 0,				\
 	.regs = NULL,			\
 }
diff --git a/arch/hexagon/include/asm/uaccess.h b/arch/hexagon/include/asm/uaccess.h
index ef5bfef8d490..bff77efc0d9a 100644
--- a/arch/hexagon/include/asm/uaccess.h
+++ b/arch/hexagon/include/asm/uaccess.h
@@ -13,31 +13,6 @@
 #include <asm/sections.h>
 
 /*
- * access_ok: - Checks if a user space pointer is valid
- * @addr: User space pointer to start of block to check
- * @size: Size of block to check
- *
- * Context: User context only. This function may sleep if pagefaults are
- *          enabled.
- *
- * Checks if a pointer to a block of memory in user space is valid.
- *
- * Returns true (nonzero) if the memory block *may* be valid, false (zero)
- * if it is definitely invalid.
- *
- * User address space in Hexagon, like x86, goes to 0xbfffffff, so the
- * simple MSB-based tests used by MIPS won't work.  Some further
- * optimization is probably possible here, but for now, keep it
- * reasonably simple and not *too* slow.  After all, we've got the
- * MMU for backup.
- */
-
-#define __access_ok(addr, size) \
-	((get_fs().seg == KERNEL_DS.seg) || \
-	(((unsigned long)addr < get_fs().seg) && \
-	  (unsigned long)size < (get_fs().seg - (unsigned long)addr)))
-
-/*
  * When a kernel-mode page fault is taken, the faulting instruction
  * address is checked against a table of exception_table_entries.
  * Each entry is a tuple of the address of an instruction that may
diff --git a/arch/hexagon/kernel/process.c b/arch/hexagon/kernel/process.c
index 232dfd8956aa..dfa6b2757c05 100644
--- a/arch/hexagon/kernel/process.c
+++ b/arch/hexagon/kernel/process.c
@@ -105,7 +105,6 @@ int copy_thread(unsigned long clone_flags, unsigned long usp, unsigned long arg,
 	/*
 	 * Parent sees new pid -- not necessary, not even possible at
 	 * this point in the fork process
-	 * Might also want to set things like ti->addr_limit
 	 */
 
 	return 0;
diff --git a/arch/hexagon/mm/init.c b/arch/hexagon/mm/init.c
index f01e91e10d95..3167a3b5c97b 100644
--- a/arch/hexagon/mm/init.c
+++ b/arch/hexagon/mm/init.c
@@ -29,8 +29,6 @@ int max_kernel_seg = 0x303;
 /*  indicate pfn's of high memory  */
 unsigned long highstart_pfn, highend_pfn;
 
-DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
-
 /* Default cache attribute for newly created page tables */
 unsigned long _dflt_cache_att = CACHEDEF;
 
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index a7e01573abd8..b2317324827f 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -8,6 +8,7 @@ menu "Processor type and features"
 
 config IA64
 	bool
+	select ARCH_BINFMT_ELF_EXTRA_PHDRS
 	select ARCH_HAS_DMA_MARK_CLEAN
 	select ARCH_HAS_STRNCPY_FROM_USER
 	select ARCH_HAS_STRNLEN_USER
@@ -61,7 +62,6 @@ config IA64
 	select NEED_SG_DMA_LENGTH
 	select NUMA if !FLATMEM
 	select PCI_MSI_ARCH_FALLBACKS if PCI_MSI
-	select SET_FS
 	select ZONE_DMA32
 	default y
 	help
diff --git a/arch/ia64/configs/zx1_defconfig b/arch/ia64/configs/zx1_defconfig
index 629cb9cdf723..851d8594cdb8 100644
--- a/arch/ia64/configs/zx1_defconfig
+++ b/arch/ia64/configs/zx1_defconfig
@@ -106,7 +106,6 @@ CONFIG_HUGETLBFS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V4=y
 CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_737=y
 CONFIG_NLS_CODEPAGE_775=y
diff --git a/arch/ia64/include/asm/pgtable.h b/arch/ia64/include/asm/pgtable.h
index 9584b2c5f394..7aa8f2330fb1 100644
--- a/arch/ia64/include/asm/pgtable.h
+++ b/arch/ia64/include/asm/pgtable.h
@@ -267,6 +267,7 @@ ia64_phys_addr_valid (unsigned long addr)
 #define pmd_present(pmd)		(pmd_val(pmd) != 0UL)
 #define pmd_clear(pmdp)			(pmd_val(*(pmdp)) = 0UL)
 #define pmd_page_vaddr(pmd)		((unsigned long) __va(pmd_val(pmd) & _PFN_MASK))
+#define pmd_pfn(pmd)			((pmd_val(pmd) & _PFN_MASK) >> PAGE_SHIFT)
 #define pmd_page(pmd)			virt_to_page((pmd_val(pmd) + PAGE_OFFSET))
 
 #define pud_none(pud)			(!pud_val(pud))
diff --git a/arch/ia64/include/asm/processor.h b/arch/ia64/include/asm/processor.h
index 45365c2ef598..7cbce290f4e5 100644
--- a/arch/ia64/include/asm/processor.h
+++ b/arch/ia64/include/asm/processor.h
@@ -243,10 +243,6 @@ DECLARE_PER_CPU(struct cpuinfo_ia64, ia64_cpu_info);
 
 extern void print_cpu_info (struct cpuinfo_ia64 *);
 
-typedef struct {
-	unsigned long seg;
-} mm_segment_t;
-
 #define SET_UNALIGN_CTL(task,value)								\
 ({												\
 	(task)->thread.flags = (((task)->thread.flags & ~IA64_THREAD_UAC_MASK)			\
diff --git a/arch/ia64/include/asm/thread_info.h b/arch/ia64/include/asm/thread_info.h
index 51d20cb37706..21b257117e0a 100644
--- a/arch/ia64/include/asm/thread_info.h
+++ b/arch/ia64/include/asm/thread_info.h
@@ -27,7 +27,6 @@ struct thread_info {
 	__u32 cpu;			/* current CPU */
 	__u32 last_cpu;			/* Last CPU thread ran on */
 	__u32 status;			/* Thread synchronous flags */
-	mm_segment_t addr_limit;	/* user-level address space limit */
 	int preempt_count;		/* 0=premptable, <0=BUG; will also serve as bh-counter */
 #ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
 	__u64 utime;
@@ -48,22 +47,21 @@ struct thread_info {
 	.task		= &tsk,			\
 	.flags		= 0,			\
 	.cpu		= 0,			\
-	.addr_limit	= KERNEL_DS,		\
 	.preempt_count	= INIT_PREEMPT_COUNT,	\
 }
 
 #ifndef ASM_OFFSETS_C
 /* how to get the thread information struct from C */
 #define current_thread_info()	((struct thread_info *) ((char *) current + IA64_TASK_SIZE))
-#define alloc_thread_stack_node(tsk, node)	\
+#define arch_alloc_thread_stack_node(tsk, node)	\
 		((unsigned long *) ((char *) (tsk) + IA64_TASK_SIZE))
 #define task_thread_info(tsk)	((struct thread_info *) ((char *) (tsk) + IA64_TASK_SIZE))
 #else
 #define current_thread_info()	((struct thread_info *) 0)
-#define alloc_thread_stack_node(tsk, node)	((unsigned long *) 0)
+#define arch_alloc_thread_stack_node(tsk, node)	((unsigned long *) 0)
 #define task_thread_info(tsk)	((struct thread_info *) 0)
 #endif
-#define free_thread_stack(tsk)	/* nothing */
+#define arch_free_thread_stack(tsk)	/* nothing */
 #define task_stack_page(tsk)	((void *)(tsk))
 
 #define __HAVE_THREAD_FUNCTIONS
diff --git a/arch/ia64/include/asm/uaccess.h b/arch/ia64/include/asm/uaccess.h
index e19d2dcc0ced..60adadeb3e9e 100644
--- a/arch/ia64/include/asm/uaccess.h
+++ b/arch/ia64/include/asm/uaccess.h
@@ -42,30 +42,20 @@
 #include <asm/extable.h>
 
 /*
- * For historical reasons, the following macros are grossly misnamed:
- */
-#define KERNEL_DS	((mm_segment_t) { ~0UL })		/* cf. access_ok() */
-#define USER_DS		((mm_segment_t) { TASK_SIZE-1 })	/* cf. access_ok() */
-
-#define get_fs()  (current_thread_info()->addr_limit)
-#define set_fs(x) (current_thread_info()->addr_limit = (x))
-
-#define uaccess_kernel()	(get_fs().seg == KERNEL_DS.seg)
-
-/*
- * When accessing user memory, we need to make sure the entire area really is in
- * user-level space.  In order to do this efficiently, we make sure that the page at
- * address TASK_SIZE is never valid.  We also need to make sure that the address doesn't
+ * When accessing user memory, we need to make sure the entire area really is
+ * in user-level space.  We also need to make sure that the address doesn't
  * point inside the virtually mapped linear page table.
  */
 static inline int __access_ok(const void __user *p, unsigned long size)
 {
+	unsigned long limit = TASK_SIZE;
 	unsigned long addr = (unsigned long)p;
-	unsigned long seg = get_fs().seg;
-	return likely(addr <= seg) &&
-	 (seg == KERNEL_DS.seg || likely(REGION_OFFSET(addr) < RGN_MAP_LIMIT));
+
+	return likely((size <= limit) && (addr <= (limit - size)) &&
+		 likely(REGION_OFFSET(addr) < RGN_MAP_LIMIT));
 }
-#define access_ok(addr, size)	__access_ok((addr), (size))
+#define __access_ok __access_ok
+#include <asm-generic/access_ok.h>
 
 /*
  * These are the main single-value transfer routines.  They automatically
diff --git a/arch/ia64/include/asm/xor.h b/arch/ia64/include/asm/xor.h
index 673051bf9d7d..6785f70d3208 100644
--- a/arch/ia64/include/asm/xor.h
+++ b/arch/ia64/include/asm/xor.h
@@ -4,13 +4,20 @@
  */
 
 
-extern void xor_ia64_2(unsigned long, unsigned long *, unsigned long *);
-extern void xor_ia64_3(unsigned long, unsigned long *, unsigned long *,
-		       unsigned long *);
-extern void xor_ia64_4(unsigned long, unsigned long *, unsigned long *,
-		       unsigned long *, unsigned long *);
-extern void xor_ia64_5(unsigned long, unsigned long *, unsigned long *,
-		       unsigned long *, unsigned long *, unsigned long *);
+extern void xor_ia64_2(unsigned long bytes, unsigned long * __restrict p1,
+		       const unsigned long * __restrict p2);
+extern void xor_ia64_3(unsigned long bytes, unsigned long * __restrict p1,
+		       const unsigned long * __restrict p2,
+		       const unsigned long * __restrict p3);
+extern void xor_ia64_4(unsigned long bytes, unsigned long * __restrict p1,
+		       const unsigned long * __restrict p2,
+		       const unsigned long * __restrict p3,
+		       const unsigned long * __restrict p4);
+extern void xor_ia64_5(unsigned long bytes, unsigned long * __restrict p1,
+		       const unsigned long * __restrict p2,
+		       const unsigned long * __restrict p3,
+		       const unsigned long * __restrict p4,
+		       const unsigned long * __restrict p5);
 
 static struct xor_block_template xor_block_ia64 = {
 	.name =	"ia64",
diff --git a/arch/ia64/include/uapi/asm/signal.h b/arch/ia64/include/uapi/asm/signal.h
index 38166a88e4c9..63d574e802a2 100644
--- a/arch/ia64/include/uapi/asm/signal.h
+++ b/arch/ia64/include/uapi/asm/signal.h
@@ -90,7 +90,7 @@ struct siginfo;
 typedef struct sigaltstack {
 	void __user *ss_sp;
 	int ss_flags;
-	size_t ss_size;
+	__kernel_size_t ss_size;
 } stack_t;
 
 
diff --git a/arch/ia64/kernel/topology.c b/arch/ia64/kernel/topology.c
index e4992917a24b..94a848b06f15 100644
--- a/arch/ia64/kernel/topology.c
+++ b/arch/ia64/kernel/topology.c
@@ -70,16 +70,6 @@ static int __init topology_init(void)
 {
 	int i, err = 0;
 
-#ifdef CONFIG_NUMA
-	/*
-	 * MCD - Do we want to register all ONLINE nodes, or all POSSIBLE nodes?
-	 */
-	for_each_online_node(i) {
-		if ((err = register_one_node(i)))
-			goto out;
-	}
-#endif
-
 	sysfs_cpus = kcalloc(NR_CPUS, sizeof(struct ia64_cpu), GFP_KERNEL);
 	if (!sysfs_cpus)
 		panic("kzalloc in topology_init failed - NR_CPUS too big?");
diff --git a/arch/ia64/kernel/unaligned.c b/arch/ia64/kernel/unaligned.c
index 6c1a8951dfbb..0acb5a0cd7ab 100644
--- a/arch/ia64/kernel/unaligned.c
+++ b/arch/ia64/kernel/unaligned.c
@@ -749,9 +749,25 @@ emulate_load_updates (update_t type, load_store_t ld, struct pt_regs *regs, unsi
 	}
 }
 
+static int emulate_store(unsigned long ifa, void *val, int len, bool kernel_mode)
+{
+	if (kernel_mode)
+		return copy_to_kernel_nofault((void *)ifa, val, len);
+
+	return copy_to_user((void __user *)ifa, val, len);
+}
+
+static int emulate_load(void *val, unsigned long ifa, int len, bool kernel_mode)
+{
+	if (kernel_mode)
+	       return copy_from_kernel_nofault(val, (void *)ifa, len);
+
+	return copy_from_user(val, (void __user *)ifa, len);
+}
 
 static int
-emulate_load_int (unsigned long ifa, load_store_t ld, struct pt_regs *regs)
+emulate_load_int (unsigned long ifa, load_store_t ld, struct pt_regs *regs,
+		  bool kernel_mode)
 {
 	unsigned int len = 1 << ld.x6_sz;
 	unsigned long val = 0;
@@ -774,7 +790,7 @@ emulate_load_int (unsigned long ifa, load_store_t ld, struct pt_regs *regs)
 		return -1;
 	}
 	/* this assumes little-endian byte-order: */
-	if (copy_from_user(&val, (void __user *) ifa, len))
+	if (emulate_load(&val, ifa, len, kernel_mode))
 		return -1;
 	setreg(ld.r1, val, 0, regs);
 
@@ -872,7 +888,8 @@ emulate_load_int (unsigned long ifa, load_store_t ld, struct pt_regs *regs)
 }
 
 static int
-emulate_store_int (unsigned long ifa, load_store_t ld, struct pt_regs *regs)
+emulate_store_int (unsigned long ifa, load_store_t ld, struct pt_regs *regs,
+		   bool kernel_mode)
 {
 	unsigned long r2;
 	unsigned int len = 1 << ld.x6_sz;
@@ -901,7 +918,7 @@ emulate_store_int (unsigned long ifa, load_store_t ld, struct pt_regs *regs)
 	}
 
 	/* this assumes little-endian byte-order: */
-	if (copy_to_user((void __user *) ifa, &r2, len))
+	if (emulate_store(ifa, &r2, len, kernel_mode))
 		return -1;
 
 	/*
@@ -1021,7 +1038,7 @@ float2mem_double (struct ia64_fpreg *init, struct ia64_fpreg *final)
 }
 
 static int
-emulate_load_floatpair (unsigned long ifa, load_store_t ld, struct pt_regs *regs)
+emulate_load_floatpair (unsigned long ifa, load_store_t ld, struct pt_regs *regs, bool kernel_mode)
 {
 	struct ia64_fpreg fpr_init[2];
 	struct ia64_fpreg fpr_final[2];
@@ -1050,8 +1067,8 @@ emulate_load_floatpair (unsigned long ifa, load_store_t ld, struct pt_regs *regs
 		 * This assumes little-endian byte-order.  Note that there is no "ldfpe"
 		 * instruction:
 		 */
-		if (copy_from_user(&fpr_init[0], (void __user *) ifa, len)
-		    || copy_from_user(&fpr_init[1], (void __user *) (ifa + len), len))
+		if (emulate_load(&fpr_init[0], ifa, len, kernel_mode)
+		    || emulate_load(&fpr_init[1], (ifa + len), len, kernel_mode))
 			return -1;
 
 		DPRINT("ld.r1=%d ld.imm=%d x6_sz=%d\n", ld.r1, ld.imm, ld.x6_sz);
@@ -1126,7 +1143,8 @@ emulate_load_floatpair (unsigned long ifa, load_store_t ld, struct pt_regs *regs
 
 
 static int
-emulate_load_float (unsigned long ifa, load_store_t ld, struct pt_regs *regs)
+emulate_load_float (unsigned long ifa, load_store_t ld, struct pt_regs *regs,
+	            bool kernel_mode)
 {
 	struct ia64_fpreg fpr_init;
 	struct ia64_fpreg fpr_final;
@@ -1152,7 +1170,7 @@ emulate_load_float (unsigned long ifa, load_store_t ld, struct pt_regs *regs)
 	 * See comments in ldX for descriptions on how the various loads are handled.
 	 */
 	if (ld.x6_op != 0x2) {
-		if (copy_from_user(&fpr_init, (void __user *) ifa, len))
+		if (emulate_load(&fpr_init, ifa, len, kernel_mode))
 			return -1;
 
 		DPRINT("ld.r1=%d x6_sz=%d\n", ld.r1, ld.x6_sz);
@@ -1202,7 +1220,8 @@ emulate_load_float (unsigned long ifa, load_store_t ld, struct pt_regs *regs)
 
 
 static int
-emulate_store_float (unsigned long ifa, load_store_t ld, struct pt_regs *regs)
+emulate_store_float (unsigned long ifa, load_store_t ld, struct pt_regs *regs,
+		     bool kernel_mode)
 {
 	struct ia64_fpreg fpr_init;
 	struct ia64_fpreg fpr_final;
@@ -1244,7 +1263,7 @@ emulate_store_float (unsigned long ifa, load_store_t ld, struct pt_regs *regs)
 	DDUMP("fpr_init =", &fpr_init, len);
 	DDUMP("fpr_final =", &fpr_final, len);
 
-	if (copy_to_user((void __user *) ifa, &fpr_final, len))
+	if (emulate_store(ifa, &fpr_final, len, kernel_mode))
 		return -1;
 
 	/*
@@ -1295,7 +1314,6 @@ void
 ia64_handle_unaligned (unsigned long ifa, struct pt_regs *regs)
 {
 	struct ia64_psr *ipsr = ia64_psr(regs);
-	mm_segment_t old_fs = get_fs();
 	unsigned long bundle[2];
 	unsigned long opcode;
 	const struct exception_table_entry *eh = NULL;
@@ -1304,6 +1322,7 @@ ia64_handle_unaligned (unsigned long ifa, struct pt_regs *regs)
 		load_store_t insn;
 	} u;
 	int ret = -1;
+	bool kernel_mode = false;
 
 	if (ia64_psr(regs)->be) {
 		/* we don't support big-endian accesses */
@@ -1367,13 +1386,13 @@ ia64_handle_unaligned (unsigned long ifa, struct pt_regs *regs)
 			if (unaligned_dump_stack)
 				dump_stack();
 		}
-		set_fs(KERNEL_DS);
+		kernel_mode = true;
 	}
 
 	DPRINT("iip=%lx ifa=%lx isr=%lx (ei=%d, sp=%d)\n",
 	       regs->cr_iip, ifa, regs->cr_ipsr, ipsr->ri, ipsr->it);
 
-	if (__copy_from_user(bundle, (void __user *) regs->cr_iip, 16))
+	if (emulate_load(bundle, regs->cr_iip, 16, kernel_mode))
 		goto failure;
 
 	/*
@@ -1467,7 +1486,7 @@ ia64_handle_unaligned (unsigned long ifa, struct pt_regs *regs)
 	      case LDCCLR_IMM_OP:
 	      case LDCNC_IMM_OP:
 	      case LDCCLRACQ_IMM_OP:
-		ret = emulate_load_int(ifa, u.insn, regs);
+		ret = emulate_load_int(ifa, u.insn, regs, kernel_mode);
 		break;
 
 	      case ST_OP:
@@ -1478,7 +1497,7 @@ ia64_handle_unaligned (unsigned long ifa, struct pt_regs *regs)
 		fallthrough;
 	      case ST_IMM_OP:
 	      case STREL_IMM_OP:
-		ret = emulate_store_int(ifa, u.insn, regs);
+		ret = emulate_store_int(ifa, u.insn, regs, kernel_mode);
 		break;
 
 	      case LDF_OP:
@@ -1486,21 +1505,21 @@ ia64_handle_unaligned (unsigned long ifa, struct pt_regs *regs)
 	      case LDFCCLR_OP:
 	      case LDFCNC_OP:
 		if (u.insn.x)
-			ret = emulate_load_floatpair(ifa, u.insn, regs);
+			ret = emulate_load_floatpair(ifa, u.insn, regs, kernel_mode);
 		else
-			ret = emulate_load_float(ifa, u.insn, regs);
+			ret = emulate_load_float(ifa, u.insn, regs, kernel_mode);
 		break;
 
 	      case LDF_IMM_OP:
 	      case LDFA_IMM_OP:
 	      case LDFCCLR_IMM_OP:
 	      case LDFCNC_IMM_OP:
-		ret = emulate_load_float(ifa, u.insn, regs);
+		ret = emulate_load_float(ifa, u.insn, regs, kernel_mode);
 		break;
 
 	      case STF_OP:
 	      case STF_IMM_OP:
-		ret = emulate_store_float(ifa, u.insn, regs);
+		ret = emulate_store_float(ifa, u.insn, regs, kernel_mode);
 		break;
 
 	      default:
@@ -1521,7 +1540,6 @@ ia64_handle_unaligned (unsigned long ifa, struct pt_regs *regs)
 
 	DPRINT("ipsr->ri=%d iip=%lx\n", ipsr->ri, regs->cr_iip);
   done:
-	set_fs(old_fs);		/* restore original address limit */
 	return;
 
   failure:
diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c
index 791d4176e4a6..73d0db36edb6 100644
--- a/arch/ia64/mm/discontig.c
+++ b/arch/ia64/mm/discontig.c
@@ -608,17 +608,11 @@ void __init paging_init(void)
 	zero_page_memmap_ptr = virt_to_page(ia64_imva(empty_zero_page));
 }
 
-#ifdef CONFIG_MEMORY_HOTPLUG
-pg_data_t *arch_alloc_nodedata(int nid)
+pg_data_t * __init arch_alloc_nodedata(int nid)
 {
 	unsigned long size = compute_pernodesize(nid);
 
-	return kzalloc(size, GFP_KERNEL);
-}
-
-void arch_free_nodedata(pg_data_t *pgdat)
-{
-	kfree(pgdat);
+	return memblock_alloc(size, SMP_CACHE_BYTES);
 }
 
 void arch_refresh_nodedata(int update_node, pg_data_t *update_pgdat)
@@ -626,7 +620,6 @@ void arch_refresh_nodedata(int update_node, pg_data_t *update_pgdat)
 	pgdat_list[update_node] = update_pgdat;
 	scatter_node_data();
 }
-#endif
 
 #ifdef CONFIG_SPARSEMEM_VMEMMAP
 int __meminit vmemmap_populate(unsigned long start, unsigned long end, int node,
diff --git a/arch/m68k/68000/dragen2.c b/arch/m68k/68000/dragen2.c
index 62f10a9e1ab7..1a57eff28cfe 100644
--- a/arch/m68k/68000/dragen2.c
+++ b/arch/m68k/68000/dragen2.c
@@ -11,6 +11,7 @@
 #include <linux/init.h>
 #include <asm/machdep.h>
 #include <asm/MC68VZ328.h>
+#include "m68328.h"
 #include "screen.h"
 
 /***************************************************************************/
diff --git a/arch/m68k/68000/screen.h b/arch/m68k/68000/screen.h
index 2089bdf02688..8f7418008908 100644
--- a/arch/m68k/68000/screen.h
+++ b/arch/m68k/68000/screen.h
@@ -1,4 +1,5 @@
 /* Created with The GIMP */
+#ifdef CONFIG_INIT_LCD
 #define screen_width 320
 #define screen_height 240
 static unsigned char screen_bits[] = {
@@ -802,3 +803,4 @@ static unsigned char screen_bits[] = {
    0x93, 0x10, 0xe2, 0x11, 0x00, 0x94, 0x22, 0x52, 0x69, 0x53, 0x52, 0x45,
    0x49, 0x22, 0xa4, 0x4a, 0x55, 0x29, 0x2a, 0xa4, 0x52, 0x42, 0xaa, 0xa5,
    0x52, 0xa8, 0xaa, 0x55, 0x4a, 0xab, 0xa9, 0x4a, 0x54, 0x49, 0x32, 0x24 };
+#endif /* CONFIG_INIT_LCD */
diff --git a/arch/m68k/68000/ucsimm.c b/arch/m68k/68000/ucsimm.c
index 7c6cbf643712..c54fde75eae8 100644
--- a/arch/m68k/68000/ucsimm.c
+++ b/arch/m68k/68000/ucsimm.c
@@ -16,19 +16,18 @@
 
 #include "m68328.h"
 
-unsigned char *cs8900a_hwaddr;
 static int errno;
 
-_bsc0(char *, getserialnum)
-_bsc1(unsigned char *, gethwaddr, int, a)
-_bsc1(char *, getbenv, char *, a)
+static _bsc0(char *, getserialnum)
+static _bsc1(unsigned char *, gethwaddr, int, a)
+static _bsc1(char *, getbenv, char *, a)
 
 void __init init_ucsimm(char *command, int size)
 {
 	char *p;
 
 	pr_info("uCsimm/uCdimm serial string [%s]\n", getserialnum());
-	p = cs8900a_hwaddr = gethwaddr(0);
+	p = gethwaddr(0);
 	pr_info("uCsimm/uCdimm hwaddr %pM\n", p);
 	p = getbenv("APPEND");
 	if (p)
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index 936e1803c7c7..936cce42ae9a 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -4,6 +4,7 @@ config M68K
 	default y
 	select ARCH_32BIT_OFF_T
 	select ARCH_HAS_BINFMT_FLAT
+	select ARCH_HAS_CURRENT_STACK_POINTER
 	select ARCH_HAS_DMA_PREP_COHERENT if HAS_DMA && MMU && !COLDFIRE
 	select ARCH_HAS_SYNC_DMA_FOR_DEVICE if HAS_DMA
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG if RMW_INSNS
@@ -17,7 +18,6 @@ config M68K
 	select GENERIC_CPU_DEVICES
 	select GENERIC_IOMAP
 	select GENERIC_IRQ_SHOW
-	select HAVE_AOUT if MMU
 	select HAVE_ASM_MODVERSIONS
 	select HAVE_DEBUG_BUGVERBOSE
 	select HAVE_EFFICIENT_UNALIGNED_ACCESS if !CPU_HAS_NO_UNALIGNED
diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu
index 0d00ef5117dc..16ea9a67723c 100644
--- a/arch/m68k/Kconfig.cpu
+++ b/arch/m68k/Kconfig.cpu
@@ -453,6 +453,7 @@ config CPU_HAS_NO_UNALIGNED
 
 config CPU_HAS_ADDRESS_SPACES
 	bool
+	select ALTERNATE_USER_ADDRESS_SPACE
 
 config FPU
 	bool
diff --git a/arch/m68k/amiga/config.c b/arch/m68k/amiga/config.c
index be2dfab48fd4..3137b45750df 100644
--- a/arch/m68k/amiga/config.c
+++ b/arch/m68k/amiga/config.c
@@ -37,6 +37,7 @@
 #include <asm/irq.h>
 #include <asm/machdep.h>
 #include <asm/io.h>
+#include <asm/config.h>
 
 static unsigned long amiga_model;
 
diff --git a/arch/m68k/apollo/config.c b/arch/m68k/apollo/config.c
index 581a5f68d102..42a8b8e2b664 100644
--- a/arch/m68k/apollo/config.c
+++ b/arch/m68k/apollo/config.c
@@ -16,6 +16,7 @@
 #include <asm/apollohw.h>
 #include <asm/irq.h>
 #include <asm/machdep.h>
+#include <asm/config.h>
 
 u_long sio01_physaddr;
 u_long sio23_physaddr;
diff --git a/arch/m68k/atari/config.c b/arch/m68k/atari/config.c
index 261a0f57cc9a..38a7c0578105 100644
--- a/arch/m68k/atari/config.c
+++ b/arch/m68k/atari/config.c
@@ -46,6 +46,7 @@
 #include <asm/machdep.h>
 #include <asm/hwtest.h>
 #include <asm/io.h>
+#include <asm/config.h>
 
 u_long atari_mch_cookie;
 EXPORT_SYMBOL(atari_mch_cookie);
diff --git a/arch/m68k/atari/stdma.c b/arch/m68k/atari/stdma.c
index ba65f942d0c7..ce6818eff75e 100644
--- a/arch/m68k/atari/stdma.c
+++ b/arch/m68k/atari/stdma.c
@@ -30,7 +30,6 @@
 
 #include <linux/types.h>
 #include <linux/kdev_t.h>
-#include <linux/genhd.h>
 #include <linux/sched.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
diff --git a/arch/m68k/bvme6000/config.c b/arch/m68k/bvme6000/config.c
index 0c6feafbbd11..3a1d90e399e0 100644
--- a/arch/m68k/bvme6000/config.c
+++ b/arch/m68k/bvme6000/config.c
@@ -23,7 +23,6 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <linux/major.h>
-#include <linux/genhd.h>
 #include <linux/rtc.h>
 #include <linux/interrupt.h>
 #include <linux/bcd.h>
@@ -36,6 +35,7 @@
 #include <asm/traps.h>
 #include <asm/machdep.h>
 #include <asm/bvme6000hw.h>
+#include <asm/config.h>
 
 static void bvme6000_get_model(char *model);
 extern void bvme6000_sched_init(void);
diff --git a/arch/m68k/coldfire/device.c b/arch/m68k/coldfire/device.c
index 0386252e9d04..4218750414bb 100644
--- a/arch/m68k/coldfire/device.c
+++ b/arch/m68k/coldfire/device.c
@@ -480,7 +480,7 @@ static struct platform_device mcf_i2c5 = {
 #endif /* MCFI2C_BASE5 */
 #endif /* IS_ENABLED(CONFIG_I2C_IMX) */
 
-#if IS_ENABLED(CONFIG_MCF_EDMA)
+#ifdef MCFEDMA_BASE
 
 static const struct dma_slave_map mcf_edma_map[] = {
 	{ "dreq0", "rx-tx", MCF_EDMA_FILTER_PARAM(0) },
@@ -552,7 +552,7 @@ static struct platform_device mcf_edma = {
 		.platform_data = &mcf_edma_data,
 	}
 };
-#endif /* IS_ENABLED(CONFIG_MCF_EDMA) */
+#endif /* MCFEDMA_BASE */
 
 #ifdef MCFSDHC_BASE
 static struct mcf_esdhc_platform_data mcf_esdhc_data = {
@@ -651,7 +651,7 @@ static struct platform_device *mcf_devices[] __initdata = {
 	&mcf_i2c5,
 #endif
 #endif
-#if IS_ENABLED(CONFIG_MCF_EDMA)
+#ifdef MCFEDMA_BASE
 	&mcf_edma,
 #endif
 #ifdef MCFSDHC_BASE
diff --git a/arch/m68k/coldfire/m5441x.c b/arch/m68k/coldfire/m5441x.c
index 39855044090d..405e9d5c832c 100644
--- a/arch/m68k/coldfire/m5441x.c
+++ b/arch/m68k/coldfire/m5441x.c
@@ -181,7 +181,6 @@ static struct clk * const disable_clks[] __initconst = {
 	&__clk_0_47, /* ssi.0 */
 	&__clk_0_49, /* rng */
 	&__clk_0_50, /* ssi.1 */
-	&__clk_0_51, /* eSDHC */
 	&__clk_0_53, /* enet-fec */
 	&__clk_0_54, /* enet-fec */
 	&__clk_0_55, /* switch.0 */
diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig
index bc9952f8be66..114aaa3f955a 100644
--- a/arch/m68k/configs/amiga_defconfig
+++ b/arch/m68k/configs/amiga_defconfig
@@ -104,7 +104,6 @@ CONFIG_NF_TABLES_NETDEV=y
 CONFIG_NFT_NUMGEN=m
 CONFIG_NFT_CT=m
 CONFIG_NFT_FLOW_OFFLOAD=m
-CONFIG_NFT_COUNTER=m
 CONFIG_NFT_CONNLIMIT=m
 CONFIG_NFT_LOG=m
 CONFIG_NFT_LIMIT=m
@@ -204,7 +203,6 @@ CONFIG_IP_SET_LIST_SET=m
 CONFIG_NFT_DUP_IPV4=m
 CONFIG_NFT_FIB_IPV4=m
 CONFIG_NF_TABLES_ARP=y
-CONFIG_NF_FLOW_TABLE_IPV4=m
 CONFIG_NF_LOG_ARP=m
 CONFIG_NF_LOG_IPV4=m
 CONFIG_IP_NF_IPTABLES=m
@@ -229,7 +227,6 @@ CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_NFT_DUP_IPV6=m
 CONFIG_NFT_FIB_IPV6=m
-CONFIG_NF_FLOW_TABLE_IPV6=m
 CONFIG_IP6_NF_IPTABLES=m
 CONFIG_IP6_NF_MATCH_AH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
@@ -435,6 +432,7 @@ CONFIG_FB_AMIGA_ECS=y
 CONFIG_FB_AMIGA_AGA=y
 CONFIG_FB_FM2=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION=y
 CONFIG_LOGO=y
 CONFIG_SOUND=m
 CONFIG_DMASOUND_PAULA=m
@@ -500,7 +498,6 @@ CONFIG_NFS_V4=m
 CONFIG_NFS_SWAP=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS2 is not set
 # CONFIG_CIFS_DEBUG is not set
@@ -643,7 +640,7 @@ CONFIG_TEST_UUID=m
 CONFIG_TEST_XARRAY=m
 CONFIG_TEST_OVERFLOW=m
 CONFIG_TEST_RHASHTABLE=m
-CONFIG_TEST_HASH=m
+CONFIG_TEST_SIPHASH=m
 CONFIG_TEST_IDA=m
 CONFIG_TEST_BITOPS=m
 CONFIG_TEST_VMALLOC=m
diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig
index a77269c6e5ba..30b9d932b930 100644
--- a/arch/m68k/configs/apollo_defconfig
+++ b/arch/m68k/configs/apollo_defconfig
@@ -100,7 +100,6 @@ CONFIG_NF_TABLES_NETDEV=y
 CONFIG_NFT_NUMGEN=m
 CONFIG_NFT_CT=m
 CONFIG_NFT_FLOW_OFFLOAD=m
-CONFIG_NFT_COUNTER=m
 CONFIG_NFT_CONNLIMIT=m
 CONFIG_NFT_LOG=m
 CONFIG_NFT_LIMIT=m
@@ -200,7 +199,6 @@ CONFIG_IP_SET_LIST_SET=m
 CONFIG_NFT_DUP_IPV4=m
 CONFIG_NFT_FIB_IPV4=m
 CONFIG_NF_TABLES_ARP=y
-CONFIG_NF_FLOW_TABLE_IPV4=m
 CONFIG_NF_LOG_ARP=m
 CONFIG_NF_LOG_IPV4=m
 CONFIG_IP_NF_IPTABLES=m
@@ -225,7 +223,6 @@ CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_NFT_DUP_IPV6=m
 CONFIG_NFT_FIB_IPV6=m
-CONFIG_NF_FLOW_TABLE_IPV6=m
 CONFIG_IP6_NF_IPTABLES=m
 CONFIG_IP6_NF_MATCH_AH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
@@ -393,6 +390,7 @@ CONFIG_PTP_1588_CLOCK=m
 # CONFIG_HWMON is not set
 CONFIG_FB=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_VGA16 is not set
 # CONFIG_LOGO_LINUX_CLUT224 is not set
@@ -457,7 +455,6 @@ CONFIG_NFS_V4=m
 CONFIG_NFS_SWAP=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS2 is not set
 # CONFIG_CIFS_DEBUG is not set
@@ -599,7 +596,7 @@ CONFIG_TEST_UUID=m
 CONFIG_TEST_XARRAY=m
 CONFIG_TEST_OVERFLOW=m
 CONFIG_TEST_RHASHTABLE=m
-CONFIG_TEST_HASH=m
+CONFIG_TEST_SIPHASH=m
 CONFIG_TEST_IDA=m
 CONFIG_TEST_BITOPS=m
 CONFIG_TEST_VMALLOC=m
diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig
index 7a74efa6b9a1..51ff3180e69d 100644
--- a/arch/m68k/configs/atari_defconfig
+++ b/arch/m68k/configs/atari_defconfig
@@ -107,7 +107,6 @@ CONFIG_NF_TABLES_NETDEV=y
 CONFIG_NFT_NUMGEN=m
 CONFIG_NFT_CT=m
 CONFIG_NFT_FLOW_OFFLOAD=m
-CONFIG_NFT_COUNTER=m
 CONFIG_NFT_CONNLIMIT=m
 CONFIG_NFT_LOG=m
 CONFIG_NFT_LIMIT=m
@@ -207,7 +206,6 @@ CONFIG_IP_SET_LIST_SET=m
 CONFIG_NFT_DUP_IPV4=m
 CONFIG_NFT_FIB_IPV4=m
 CONFIG_NF_TABLES_ARP=y
-CONFIG_NF_FLOW_TABLE_IPV4=m
 CONFIG_NF_LOG_ARP=m
 CONFIG_NF_LOG_IPV4=m
 CONFIG_IP_NF_IPTABLES=m
@@ -232,7 +230,6 @@ CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_NFT_DUP_IPV6=m
 CONFIG_NFT_FIB_IPV6=m
-CONFIG_NF_FLOW_TABLE_IPV6=m
 CONFIG_IP6_NF_IPTABLES=m
 CONFIG_IP6_NF_MATCH_AH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
@@ -478,7 +475,6 @@ CONFIG_NFS_V4=m
 CONFIG_NFS_SWAP=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS2 is not set
 # CONFIG_CIFS_DEBUG is not set
@@ -621,7 +617,7 @@ CONFIG_TEST_UUID=m
 CONFIG_TEST_XARRAY=m
 CONFIG_TEST_OVERFLOW=m
 CONFIG_TEST_RHASHTABLE=m
-CONFIG_TEST_HASH=m
+CONFIG_TEST_SIPHASH=m
 CONFIG_TEST_IDA=m
 CONFIG_TEST_BITOPS=m
 CONFIG_TEST_VMALLOC=m
diff --git a/arch/m68k/configs/bvme6000_defconfig b/arch/m68k/configs/bvme6000_defconfig
index a5323bf2eb33..7d95ca4366e4 100644
--- a/arch/m68k/configs/bvme6000_defconfig
+++ b/arch/m68k/configs/bvme6000_defconfig
@@ -97,7 +97,6 @@ CONFIG_NF_TABLES_NETDEV=y
 CONFIG_NFT_NUMGEN=m
 CONFIG_NFT_CT=m
 CONFIG_NFT_FLOW_OFFLOAD=m
-CONFIG_NFT_COUNTER=m
 CONFIG_NFT_CONNLIMIT=m
 CONFIG_NFT_LOG=m
 CONFIG_NFT_LIMIT=m
@@ -197,7 +196,6 @@ CONFIG_IP_SET_LIST_SET=m
 CONFIG_NFT_DUP_IPV4=m
 CONFIG_NFT_FIB_IPV4=m
 CONFIG_NF_TABLES_ARP=y
-CONFIG_NF_FLOW_TABLE_IPV4=m
 CONFIG_NF_LOG_ARP=m
 CONFIG_NF_LOG_IPV4=m
 CONFIG_IP_NF_IPTABLES=m
@@ -222,7 +220,6 @@ CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_NFT_DUP_IPV6=m
 CONFIG_NFT_FIB_IPV6=m
-CONFIG_NF_FLOW_TABLE_IPV6=m
 CONFIG_IP6_NF_IPTABLES=m
 CONFIG_IP6_NF_MATCH_AH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
@@ -450,7 +447,6 @@ CONFIG_NFS_V4=m
 CONFIG_NFS_SWAP=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS2 is not set
 # CONFIG_CIFS_DEBUG is not set
@@ -592,7 +588,7 @@ CONFIG_TEST_UUID=m
 CONFIG_TEST_XARRAY=m
 CONFIG_TEST_OVERFLOW=m
 CONFIG_TEST_RHASHTABLE=m
-CONFIG_TEST_HASH=m
+CONFIG_TEST_SIPHASH=m
 CONFIG_TEST_IDA=m
 CONFIG_TEST_BITOPS=m
 CONFIG_TEST_VMALLOC=m
diff --git a/arch/m68k/configs/hp300_defconfig b/arch/m68k/configs/hp300_defconfig
index 5e80aa0869d5..e306e3813607 100644
--- a/arch/m68k/configs/hp300_defconfig
+++ b/arch/m68k/configs/hp300_defconfig
@@ -99,7 +99,6 @@ CONFIG_NF_TABLES_NETDEV=y
 CONFIG_NFT_NUMGEN=m
 CONFIG_NFT_CT=m
 CONFIG_NFT_FLOW_OFFLOAD=m
-CONFIG_NFT_COUNTER=m
 CONFIG_NFT_CONNLIMIT=m
 CONFIG_NFT_LOG=m
 CONFIG_NFT_LIMIT=m
@@ -199,7 +198,6 @@ CONFIG_IP_SET_LIST_SET=m
 CONFIG_NFT_DUP_IPV4=m
 CONFIG_NFT_FIB_IPV4=m
 CONFIG_NF_TABLES_ARP=y
-CONFIG_NF_FLOW_TABLE_IPV4=m
 CONFIG_NF_LOG_ARP=m
 CONFIG_NF_LOG_IPV4=m
 CONFIG_IP_NF_IPTABLES=m
@@ -224,7 +222,6 @@ CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_NFT_DUP_IPV6=m
 CONFIG_NFT_FIB_IPV6=m
-CONFIG_NF_FLOW_TABLE_IPV6=m
 CONFIG_IP6_NF_IPTABLES=m
 CONFIG_IP6_NF_MATCH_AH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
@@ -395,6 +392,7 @@ CONFIG_PTP_1588_CLOCK=m
 # CONFIG_HWMON is not set
 CONFIG_FB=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
@@ -459,7 +457,6 @@ CONFIG_NFS_V4=m
 CONFIG_NFS_SWAP=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS2 is not set
 # CONFIG_CIFS_DEBUG is not set
@@ -601,7 +598,7 @@ CONFIG_TEST_UUID=m
 CONFIG_TEST_XARRAY=m
 CONFIG_TEST_OVERFLOW=m
 CONFIG_TEST_RHASHTABLE=m
-CONFIG_TEST_HASH=m
+CONFIG_TEST_SIPHASH=m
 CONFIG_TEST_IDA=m
 CONFIG_TEST_BITOPS=m
 CONFIG_TEST_VMALLOC=m
diff --git a/arch/m68k/configs/mac_defconfig b/arch/m68k/configs/mac_defconfig
index e84326a3f62d..41316cf02441 100644
--- a/arch/m68k/configs/mac_defconfig
+++ b/arch/m68k/configs/mac_defconfig
@@ -98,7 +98,6 @@ CONFIG_NF_TABLES_NETDEV=y
 CONFIG_NFT_NUMGEN=m
 CONFIG_NFT_CT=m
 CONFIG_NFT_FLOW_OFFLOAD=m
-CONFIG_NFT_COUNTER=m
 CONFIG_NFT_CONNLIMIT=m
 CONFIG_NFT_LOG=m
 CONFIG_NFT_LIMIT=m
@@ -198,7 +197,6 @@ CONFIG_IP_SET_LIST_SET=m
 CONFIG_NFT_DUP_IPV4=m
 CONFIG_NFT_FIB_IPV4=m
 CONFIG_NF_TABLES_ARP=y
-CONFIG_NF_FLOW_TABLE_IPV4=m
 CONFIG_NF_LOG_ARP=m
 CONFIG_NF_LOG_IPV4=m
 CONFIG_IP_NF_IPTABLES=m
@@ -223,7 +221,6 @@ CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_NFT_DUP_IPV6=m
 CONFIG_NFT_FIB_IPV6=m
-CONFIG_NF_FLOW_TABLE_IPV6=m
 CONFIG_IP6_NF_IPTABLES=m
 CONFIG_IP6_NF_MATCH_AH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
@@ -480,7 +477,6 @@ CONFIG_NFS_V4=m
 CONFIG_NFS_SWAP=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS2 is not set
 # CONFIG_CIFS_DEBUG is not set
@@ -623,7 +619,7 @@ CONFIG_TEST_UUID=m
 CONFIG_TEST_XARRAY=m
 CONFIG_TEST_OVERFLOW=m
 CONFIG_TEST_RHASHTABLE=m
-CONFIG_TEST_HASH=m
+CONFIG_TEST_SIPHASH=m
 CONFIG_TEST_IDA=m
 CONFIG_TEST_BITOPS=m
 CONFIG_TEST_VMALLOC=m
diff --git a/arch/m68k/configs/multi_defconfig b/arch/m68k/configs/multi_defconfig
index 337552f43339..2fc3f0df6d43 100644
--- a/arch/m68k/configs/multi_defconfig
+++ b/arch/m68k/configs/multi_defconfig
@@ -118,7 +118,6 @@ CONFIG_NF_TABLES_NETDEV=y
 CONFIG_NFT_NUMGEN=m
 CONFIG_NFT_CT=m
 CONFIG_NFT_FLOW_OFFLOAD=m
-CONFIG_NFT_COUNTER=m
 CONFIG_NFT_CONNLIMIT=m
 CONFIG_NFT_LOG=m
 CONFIG_NFT_LIMIT=m
@@ -218,7 +217,6 @@ CONFIG_IP_SET_LIST_SET=m
 CONFIG_NFT_DUP_IPV4=m
 CONFIG_NFT_FIB_IPV4=m
 CONFIG_NF_TABLES_ARP=y
-CONFIG_NF_FLOW_TABLE_IPV4=m
 CONFIG_NF_LOG_ARP=m
 CONFIG_NF_LOG_IPV4=m
 CONFIG_IP_NF_IPTABLES=m
@@ -243,7 +241,6 @@ CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_NFT_DUP_IPV6=m
 CONFIG_NFT_FIB_IPV6=m
-CONFIG_NF_FLOW_TABLE_IPV6=m
 CONFIG_IP6_NF_IPTABLES=m
 CONFIG_IP6_NF_MATCH_AH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
@@ -497,6 +494,7 @@ CONFIG_FB_ATARI=y
 CONFIG_FB_VALKYRIE=y
 CONFIG_FB_MAC=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION=y
 CONFIG_LOGO=y
 CONFIG_SOUND=m
 CONFIG_DMASOUND_ATARI=m
@@ -565,7 +563,6 @@ CONFIG_NFS_V4=m
 CONFIG_NFS_SWAP=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS2 is not set
 # CONFIG_CIFS_DEBUG is not set
@@ -708,7 +705,7 @@ CONFIG_TEST_UUID=m
 CONFIG_TEST_XARRAY=m
 CONFIG_TEST_OVERFLOW=m
 CONFIG_TEST_RHASHTABLE=m
-CONFIG_TEST_HASH=m
+CONFIG_TEST_SIPHASH=m
 CONFIG_TEST_IDA=m
 CONFIG_TEST_BITOPS=m
 CONFIG_TEST_VMALLOC=m
diff --git a/arch/m68k/configs/mvme147_defconfig b/arch/m68k/configs/mvme147_defconfig
index 7b688f7d272a..9603f4396469 100644
--- a/arch/m68k/configs/mvme147_defconfig
+++ b/arch/m68k/configs/mvme147_defconfig
@@ -96,7 +96,6 @@ CONFIG_NF_TABLES_NETDEV=y
 CONFIG_NFT_NUMGEN=m
 CONFIG_NFT_CT=m
 CONFIG_NFT_FLOW_OFFLOAD=m
-CONFIG_NFT_COUNTER=m
 CONFIG_NFT_CONNLIMIT=m
 CONFIG_NFT_LOG=m
 CONFIG_NFT_LIMIT=m
@@ -196,7 +195,6 @@ CONFIG_IP_SET_LIST_SET=m
 CONFIG_NFT_DUP_IPV4=m
 CONFIG_NFT_FIB_IPV4=m
 CONFIG_NF_TABLES_ARP=y
-CONFIG_NF_FLOW_TABLE_IPV4=m
 CONFIG_NF_LOG_ARP=m
 CONFIG_NF_LOG_IPV4=m
 CONFIG_IP_NF_IPTABLES=m
@@ -221,7 +219,6 @@ CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_NFT_DUP_IPV6=m
 CONFIG_NFT_FIB_IPV6=m
-CONFIG_NF_FLOW_TABLE_IPV6=m
 CONFIG_IP6_NF_IPTABLES=m
 CONFIG_IP6_NF_MATCH_AH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
@@ -449,7 +446,6 @@ CONFIG_NFS_V4=m
 CONFIG_NFS_SWAP=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS2 is not set
 # CONFIG_CIFS_DEBUG is not set
@@ -591,7 +587,7 @@ CONFIG_TEST_UUID=m
 CONFIG_TEST_XARRAY=m
 CONFIG_TEST_OVERFLOW=m
 CONFIG_TEST_RHASHTABLE=m
-CONFIG_TEST_HASH=m
+CONFIG_TEST_SIPHASH=m
 CONFIG_TEST_IDA=m
 CONFIG_TEST_BITOPS=m
 CONFIG_TEST_VMALLOC=m
diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig
index 7c2cb31d63dd..c9cabd3344df 100644
--- a/arch/m68k/configs/mvme16x_defconfig
+++ b/arch/m68k/configs/mvme16x_defconfig
@@ -97,7 +97,6 @@ CONFIG_NF_TABLES_NETDEV=y
 CONFIG_NFT_NUMGEN=m
 CONFIG_NFT_CT=m
 CONFIG_NFT_FLOW_OFFLOAD=m
-CONFIG_NFT_COUNTER=m
 CONFIG_NFT_CONNLIMIT=m
 CONFIG_NFT_LOG=m
 CONFIG_NFT_LIMIT=m
@@ -197,7 +196,6 @@ CONFIG_IP_SET_LIST_SET=m
 CONFIG_NFT_DUP_IPV4=m
 CONFIG_NFT_FIB_IPV4=m
 CONFIG_NF_TABLES_ARP=y
-CONFIG_NF_FLOW_TABLE_IPV4=m
 CONFIG_NF_LOG_ARP=m
 CONFIG_NF_LOG_IPV4=m
 CONFIG_IP_NF_IPTABLES=m
@@ -222,7 +220,6 @@ CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_NFT_DUP_IPV6=m
 CONFIG_NFT_FIB_IPV6=m
-CONFIG_NF_FLOW_TABLE_IPV6=m
 CONFIG_IP6_NF_IPTABLES=m
 CONFIG_IP6_NF_MATCH_AH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
@@ -450,7 +447,6 @@ CONFIG_NFS_V4=m
 CONFIG_NFS_SWAP=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS2 is not set
 # CONFIG_CIFS_DEBUG is not set
@@ -592,7 +588,7 @@ CONFIG_TEST_UUID=m
 CONFIG_TEST_XARRAY=m
 CONFIG_TEST_OVERFLOW=m
 CONFIG_TEST_RHASHTABLE=m
-CONFIG_TEST_HASH=m
+CONFIG_TEST_SIPHASH=m
 CONFIG_TEST_IDA=m
 CONFIG_TEST_BITOPS=m
 CONFIG_TEST_VMALLOC=m
diff --git a/arch/m68k/configs/q40_defconfig b/arch/m68k/configs/q40_defconfig
index ca43897af26d..5f994bf44fb8 100644
--- a/arch/m68k/configs/q40_defconfig
+++ b/arch/m68k/configs/q40_defconfig
@@ -98,7 +98,6 @@ CONFIG_NF_TABLES_NETDEV=y
 CONFIG_NFT_NUMGEN=m
 CONFIG_NFT_CT=m
 CONFIG_NFT_FLOW_OFFLOAD=m
-CONFIG_NFT_COUNTER=m
 CONFIG_NFT_CONNLIMIT=m
 CONFIG_NFT_LOG=m
 CONFIG_NFT_LIMIT=m
@@ -198,7 +197,6 @@ CONFIG_IP_SET_LIST_SET=m
 CONFIG_NFT_DUP_IPV4=m
 CONFIG_NFT_FIB_IPV4=m
 CONFIG_NF_TABLES_ARP=y
-CONFIG_NF_FLOW_TABLE_IPV4=m
 CONFIG_NF_LOG_ARP=m
 CONFIG_NF_LOG_IPV4=m
 CONFIG_IP_NF_IPTABLES=m
@@ -223,7 +221,6 @@ CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_NFT_DUP_IPV6=m
 CONFIG_NFT_FIB_IPV6=m
-CONFIG_NF_FLOW_TABLE_IPV6=m
 CONFIG_IP6_NF_IPTABLES=m
 CONFIG_IP6_NF_MATCH_AH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
@@ -467,7 +464,6 @@ CONFIG_NFS_V4=m
 CONFIG_NFS_SWAP=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS2 is not set
 # CONFIG_CIFS_DEBUG is not set
@@ -610,7 +606,7 @@ CONFIG_TEST_UUID=m
 CONFIG_TEST_XARRAY=m
 CONFIG_TEST_OVERFLOW=m
 CONFIG_TEST_RHASHTABLE=m
-CONFIG_TEST_HASH=m
+CONFIG_TEST_SIPHASH=m
 CONFIG_TEST_IDA=m
 CONFIG_TEST_BITOPS=m
 CONFIG_TEST_VMALLOC=m
diff --git a/arch/m68k/configs/sun3_defconfig b/arch/m68k/configs/sun3_defconfig
index e3d515f37144..183e33f7d4a0 100644
--- a/arch/m68k/configs/sun3_defconfig
+++ b/arch/m68k/configs/sun3_defconfig
@@ -94,7 +94,6 @@ CONFIG_NF_TABLES_NETDEV=y
 CONFIG_NFT_NUMGEN=m
 CONFIG_NFT_CT=m
 CONFIG_NFT_FLOW_OFFLOAD=m
-CONFIG_NFT_COUNTER=m
 CONFIG_NFT_CONNLIMIT=m
 CONFIG_NFT_LOG=m
 CONFIG_NFT_LIMIT=m
@@ -194,7 +193,6 @@ CONFIG_IP_SET_LIST_SET=m
 CONFIG_NFT_DUP_IPV4=m
 CONFIG_NFT_FIB_IPV4=m
 CONFIG_NF_TABLES_ARP=y
-CONFIG_NF_FLOW_TABLE_IPV4=m
 CONFIG_NF_LOG_ARP=m
 CONFIG_NF_LOG_IPV4=m
 CONFIG_IP_NF_IPTABLES=m
@@ -219,7 +217,6 @@ CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_NFT_DUP_IPV6=m
 CONFIG_NFT_FIB_IPV6=m
-CONFIG_NF_FLOW_TABLE_IPV6=m
 CONFIG_IP6_NF_IPTABLES=m
 CONFIG_IP6_NF_MATCH_AH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
@@ -388,9 +385,6 @@ CONFIG_NTP_PPS=y
 CONFIG_PPS_CLIENT_LDISC=m
 CONFIG_PTP_1588_CLOCK=m
 # CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
 CONFIG_HID=m
 CONFIG_HIDRAW=y
 CONFIG_UHID=m
@@ -452,7 +446,6 @@ CONFIG_NFS_V4=m
 CONFIG_NFS_SWAP=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS2 is not set
 # CONFIG_CIFS_DEBUG is not set
@@ -593,7 +586,7 @@ CONFIG_TEST_UUID=m
 CONFIG_TEST_XARRAY=m
 CONFIG_TEST_OVERFLOW=m
 CONFIG_TEST_RHASHTABLE=m
-CONFIG_TEST_HASH=m
+CONFIG_TEST_SIPHASH=m
 CONFIG_TEST_IDA=m
 CONFIG_TEST_BITOPS=m
 CONFIG_TEST_VMALLOC=m
diff --git a/arch/m68k/configs/sun3x_defconfig b/arch/m68k/configs/sun3x_defconfig
index d601606c969b..8214263b9ab8 100644
--- a/arch/m68k/configs/sun3x_defconfig
+++ b/arch/m68k/configs/sun3x_defconfig
@@ -94,7 +94,6 @@ CONFIG_NF_TABLES_NETDEV=y
 CONFIG_NFT_NUMGEN=m
 CONFIG_NFT_CT=m
 CONFIG_NFT_FLOW_OFFLOAD=m
-CONFIG_NFT_COUNTER=m
 CONFIG_NFT_CONNLIMIT=m
 CONFIG_NFT_LOG=m
 CONFIG_NFT_LIMIT=m
@@ -194,7 +193,6 @@ CONFIG_IP_SET_LIST_SET=m
 CONFIG_NFT_DUP_IPV4=m
 CONFIG_NFT_FIB_IPV4=m
 CONFIG_NF_TABLES_ARP=y
-CONFIG_NF_FLOW_TABLE_IPV4=m
 CONFIG_NF_LOG_ARP=m
 CONFIG_NF_LOG_IPV4=m
 CONFIG_IP_NF_IPTABLES=m
@@ -219,7 +217,6 @@ CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_NFT_DUP_IPV6=m
 CONFIG_NFT_FIB_IPV6=m
-CONFIG_NF_FLOW_TABLE_IPV6=m
 CONFIG_IP6_NF_IPTABLES=m
 CONFIG_IP6_NF_MATCH_AH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
@@ -387,9 +384,6 @@ CONFIG_NTP_PPS=y
 CONFIG_PPS_CLIENT_LDISC=m
 CONFIG_PTP_1588_CLOCK=m
 # CONFIG_HWMON is not set
-CONFIG_FB=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
 CONFIG_HID=m
 CONFIG_HIDRAW=y
 CONFIG_UHID=m
@@ -451,7 +445,6 @@ CONFIG_NFS_V4=m
 CONFIG_NFS_SWAP=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS2 is not set
 # CONFIG_CIFS_DEBUG is not set
@@ -593,7 +586,7 @@ CONFIG_TEST_UUID=m
 CONFIG_TEST_XARRAY=m
 CONFIG_TEST_OVERFLOW=m
 CONFIG_TEST_RHASHTABLE=m
-CONFIG_TEST_HASH=m
+CONFIG_TEST_SIPHASH=m
 CONFIG_TEST_IDA=m
 CONFIG_TEST_BITOPS=m
 CONFIG_TEST_VMALLOC=m
diff --git a/arch/m68k/emu/nfblock.c b/arch/m68k/emu/nfblock.c
index 9c57b245dc12..267b02cc5655 100644
--- a/arch/m68k/emu/nfblock.c
+++ b/arch/m68k/emu/nfblock.c
@@ -13,7 +13,6 @@
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/types.h>
-#include <linux/genhd.h>
 #include <linux/blkdev.h>
 #include <linux/hdreg.h>
 #include <linux/slab.h>
diff --git a/arch/m68k/hp300/config.c b/arch/m68k/hp300/config.c
index ce1eb3d3d55d..2c92843397c3 100644
--- a/arch/m68k/hp300/config.c
+++ b/arch/m68k/hp300/config.c
@@ -22,6 +22,7 @@
 #include <asm/blinken.h>
 #include <asm/io.h>                               /* readb() and writeb() */
 #include <asm/hp300hw.h>
+#include <asm/config.h>
 
 #include "time.h"
 
diff --git a/arch/m68k/include/asm/cmpxchg.h b/arch/m68k/include/asm/cmpxchg.h
index e8ca4b0ccefa..6cf464cdab06 100644
--- a/arch/m68k/include/asm/cmpxchg.h
+++ b/arch/m68k/include/asm/cmpxchg.h
@@ -4,8 +4,7 @@
 
 #include <linux/irqflags.h>
 
-struct __xchg_dummy { unsigned long a[100]; };
-#define __xg(x) ((volatile struct __xchg_dummy *)(x))
+#define __xg(type, x) ((volatile type *)(x))
 
 extern unsigned long __invalid_xchg_size(unsigned long, volatile void *, int);
 
@@ -50,7 +49,7 @@ static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int siz
 			 "1:\n\t"
 			 "casb %0,%1,%2\n\t"
 			 "jne 1b"
-			 : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
+			 : "=&d" (x) : "d" (x), "m" (*__xg(u8, ptr)) : "memory");
 		break;
 	case 2:
 		__asm__ __volatile__
@@ -58,7 +57,7 @@ static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int siz
 			 "1:\n\t"
 			 "casw %0,%1,%2\n\t"
 			 "jne 1b"
-			 : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
+			 : "=&d" (x) : "d" (x), "m" (*__xg(u16, ptr)) : "memory");
 		break;
 	case 4:
 		__asm__ __volatile__
@@ -66,7 +65,7 @@ static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int siz
 			 "1:\n\t"
 			 "casl %0,%1,%2\n\t"
 			 "jne 1b"
-			 : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
+			 : "=&d" (x) : "d" (x), "m" (*__xg(u32, ptr)) : "memory");
 		break;
 	default:
 		x = __invalid_xchg_size(x, ptr, size);
diff --git a/arch/m68k/include/asm/config.h b/arch/m68k/include/asm/config.h
new file mode 100644
index 000000000000..e73ffa23c4f5
--- /dev/null
+++ b/arch/m68k/include/asm/config.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+/*
+ * This file contains prototypes provided by each m68k machine
+ * to parse bootinfo data structures and to configure the machine
+ */
+
+#ifndef _M68K_CONFIG_H
+#define _M68K_CONFIG_H
+
+extern int amiga_parse_bootinfo(const struct bi_record *record);
+extern int apollo_parse_bootinfo(const struct bi_record *record);
+extern int atari_parse_bootinfo(const struct bi_record *record);
+extern int bvme6000_parse_bootinfo(const struct bi_record *record);
+extern int hp300_parse_bootinfo(const struct bi_record *record);
+extern int mac_parse_bootinfo(const struct bi_record *record);
+extern int mvme147_parse_bootinfo(const struct bi_record *record);
+extern int mvme16x_parse_bootinfo(const struct bi_record *record);
+extern int q40_parse_bootinfo(const struct bi_record *record);
+
+extern void config_amiga(void);
+extern void config_apollo(void);
+extern void config_atari(void);
+extern void config_bvme6000(void);
+extern void config_hp300(void);
+extern void config_mac(void);
+extern void config_mvme147(void);
+extern void config_mvme16x(void);
+extern void config_q40(void);
+extern void config_sun3(void);
+extern void config_sun3x(void);
+
+#endif /* _M68K_CONFIG_H */
diff --git a/arch/m68k/include/asm/current.h b/arch/m68k/include/asm/current.h
index 6390ef2f7f86..c117907e1276 100644
--- a/arch/m68k/include/asm/current.h
+++ b/arch/m68k/include/asm/current.h
@@ -24,6 +24,8 @@ static inline struct task_struct *get_current(void)
 
 #define	current	get_current()
 
-#endif /* CONFNIG_MMU */
+#endif /* CONFIG_MMU */
+
+register unsigned long current_stack_pointer __asm__("sp");
 
 #endif /* !(_M68K_CURRENT_H) */
diff --git a/arch/m68k/include/asm/mcf_pgtable.h b/arch/m68k/include/asm/mcf_pgtable.h
index 6f2b87d7a50d..94f38d76e278 100644
--- a/arch/m68k/include/asm/mcf_pgtable.h
+++ b/arch/m68k/include/asm/mcf_pgtable.h
@@ -322,6 +322,7 @@ extern pgd_t kernel_pg_dir[PTRS_PER_PGD];
 #define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
 #define __swp_entry_to_pte(x)	(__pte((x).val))
 
+#define pmd_pfn(pmd)		(pmd_val(pmd) >> PAGE_SHIFT)
 #define pmd_page(pmd)		(pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT))
 
 #define pfn_pte(pfn, prot)	__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
diff --git a/arch/m68k/include/asm/motorola_pgtable.h b/arch/m68k/include/asm/motorola_pgtable.h
index 022c3abc280d..7c9b56e2a750 100644
--- a/arch/m68k/include/asm/motorola_pgtable.h
+++ b/arch/m68k/include/asm/motorola_pgtable.h
@@ -147,6 +147,7 @@ static inline void pud_set(pud_t *pudp, pmd_t *pmdp)
 #define pmd_present(pmd)	(pmd_val(pmd) & _PAGE_TABLE)
 #define pmd_clear(pmdp)		({ pmd_val(*pmdp) = 0; })
 
+#define pmd_pfn(pmd)		((pmd_val(pmd) & _TABLE_MASK) >> PAGE_SHIFT)
 /*
  * m68k does not have huge pages (020/030 actually could), but generic code
  * expects pmd_page() to exists, only to then DCE it all. Provide a dummy to
diff --git a/arch/m68k/include/asm/sun3_pgtable.h b/arch/m68k/include/asm/sun3_pgtable.h
index 5b24283a0a42..5e4e753f0d24 100644
--- a/arch/m68k/include/asm/sun3_pgtable.h
+++ b/arch/m68k/include/asm/sun3_pgtable.h
@@ -130,6 +130,7 @@ static inline void pte_clear (struct mm_struct *mm, unsigned long addr, pte_t *p
 ({ pte_t __pte; pte_val(__pte) = pfn | pgprot_val(pgprot); __pte; })
 
 #define pte_page(pte)		virt_to_page(__pte_page(pte))
+#define pmd_pfn(pmd)		(pmd_val(pmd) >> PAGE_SHIFT)
 #define pmd_page(pmd)		virt_to_page(pmd_page_vaddr(pmd))
 
 
diff --git a/arch/m68k/include/asm/uaccess.h b/arch/m68k/include/asm/uaccess.h
index ba670523885c..64914872a5c9 100644
--- a/arch/m68k/include/asm/uaccess.h
+++ b/arch/m68k/include/asm/uaccess.h
@@ -10,17 +10,7 @@
 #include <linux/compiler.h>
 #include <linux/types.h>
 #include <asm/extable.h>
-
-/* We let the MMU do all checking */
-static inline int access_ok(const void __user *addr,
-			    unsigned long size)
-{
-	/*
-	 * XXX: for !CONFIG_CPU_HAS_ADDRESS_SPACES this really needs to check
-	 * for TASK_SIZE!
-	 */
-	return 1;
-}
+#include <asm-generic/access_ok.h>
 
 /*
  * Not all varients of the 68k family support the notion of address spaces.
@@ -390,8 +380,6 @@ raw_copy_to_user(void __user *to, const void *from, unsigned long n)
 #define INLINE_COPY_FROM_USER
 #define INLINE_COPY_TO_USER
 
-#define HAVE_GET_KERNEL_NOFAULT
-
 #define __get_kernel_nofault(dst, src, type, err_label)			\
 do {									\
 	type *__gk_dst = (type *)(dst);					\
diff --git a/arch/m68k/include/uapi/asm/signal.h b/arch/m68k/include/uapi/asm/signal.h
index 4619291df601..80f520b9b10b 100644
--- a/arch/m68k/include/uapi/asm/signal.h
+++ b/arch/m68k/include/uapi/asm/signal.h
@@ -83,7 +83,7 @@ struct sigaction {
 typedef struct sigaltstack {
 	void __user *ss_sp;
 	int ss_flags;
-	size_t ss_size;
+	__kernel_size_t ss_size;
 } stack_t;
 
 #endif /* _UAPI_M68K_SIGNAL_H */
diff --git a/arch/m68k/kernel/setup_mm.c b/arch/m68k/kernel/setup_mm.c
index 49e573b94326..8f94feed969c 100644
--- a/arch/m68k/kernel/setup_mm.c
+++ b/arch/m68k/kernel/setup_mm.c
@@ -16,7 +16,6 @@
 #include <linux/interrupt.h>
 #include <linux/fs.h>
 #include <linux/console.h>
-#include <linux/genhd.h>
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/init.h>
@@ -47,6 +46,7 @@
 #endif
 #include <asm/macintosh.h>
 #include <asm/natfeat.h>
+#include <asm/config.h>
 
 #if !FPSTATESIZE || !NR_IRQS
 #warning No CPU/platform type selected, your kernel will not work!
@@ -113,28 +113,6 @@ EXPORT_SYMBOL(isa_type);
 EXPORT_SYMBOL(isa_sex);
 #endif
 
-extern int amiga_parse_bootinfo(const struct bi_record *);
-extern int atari_parse_bootinfo(const struct bi_record *);
-extern int mac_parse_bootinfo(const struct bi_record *);
-extern int q40_parse_bootinfo(const struct bi_record *);
-extern int bvme6000_parse_bootinfo(const struct bi_record *);
-extern int mvme16x_parse_bootinfo(const struct bi_record *);
-extern int mvme147_parse_bootinfo(const struct bi_record *);
-extern int hp300_parse_bootinfo(const struct bi_record *);
-extern int apollo_parse_bootinfo(const struct bi_record *);
-
-extern void config_amiga(void);
-extern void config_atari(void);
-extern void config_mac(void);
-extern void config_sun3(void);
-extern void config_apollo(void);
-extern void config_mvme147(void);
-extern void config_mvme16x(void);
-extern void config_bvme6000(void);
-extern void config_hp300(void);
-extern void config_q40(void);
-extern void config_sun3x(void);
-
 #define MASK_256K 0xfffc0000
 
 extern void paging_init(void);
diff --git a/arch/m68k/mac/config.c b/arch/m68k/mac/config.c
index 5d16f9b47aa9..65d124ec80bb 100644
--- a/arch/m68k/mac/config.c
+++ b/arch/m68k/mac/config.c
@@ -47,6 +47,7 @@
 #include <asm/mac_via.h>
 #include <asm/mac_oss.h>
 #include <asm/mac_psc.h>
+#include <asm/config.h>
 
 /* Mac bootinfo struct */
 struct mac_booter_data mac_bi_data;
diff --git a/arch/m68k/mm/fault.c b/arch/m68k/mm/fault.c
index 1493cf5eac1e..71aa9f6315dc 100644
--- a/arch/m68k/mm/fault.c
+++ b/arch/m68k/mm/fault.c
@@ -93,8 +93,6 @@ retry:
 	vma = find_vma(mm, address);
 	if (!vma)
 		goto map_err;
-	if (vma->vm_flags & VM_IO)
-		goto acc_err;
 	if (vma->vm_start <= address)
 		goto good_area;
 	if (!(vma->vm_flags & VM_GROWSDOWN))
diff --git a/arch/m68k/mvme147/config.c b/arch/m68k/mvme147/config.c
index dfd6202fd403..4e6218115f43 100644
--- a/arch/m68k/mvme147/config.c
+++ b/arch/m68k/mvme147/config.c
@@ -22,7 +22,6 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <linux/major.h>
-#include <linux/genhd.h>
 #include <linux/rtc.h>
 #include <linux/interrupt.h>
 
@@ -34,6 +33,7 @@
 #include <asm/traps.h>
 #include <asm/machdep.h>
 #include <asm/mvme147hw.h>
+#include <asm/config.h>
 
 
 static void mvme147_get_model(char *model);
diff --git a/arch/m68k/mvme16x/config.c b/arch/m68k/mvme16x/config.c
index b4422c2dfbbf..f00c7aa058de 100644
--- a/arch/m68k/mvme16x/config.c
+++ b/arch/m68k/mvme16x/config.c
@@ -24,7 +24,6 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <linux/major.h>
-#include <linux/genhd.h>
 #include <linux/rtc.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
@@ -37,6 +36,7 @@
 #include <asm/traps.h>
 #include <asm/machdep.h>
 #include <asm/mvme16xhw.h>
+#include <asm/config.h>
 
 extern t_bdid mvme_bdid;
 
diff --git a/arch/m68k/q40/config.c b/arch/m68k/q40/config.c
index 5caf1e5be1c2..9237243077ce 100644
--- a/arch/m68k/q40/config.c
+++ b/arch/m68k/q40/config.c
@@ -34,6 +34,7 @@
 #include <asm/traps.h>
 #include <asm/machdep.h>
 #include <asm/q40_master.h>
+#include <asm/config.h>
 
 extern void q40_init_IRQ(void);
 static void q40_get_model(char *model);
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index 59798e43cdb0..8cf429ad1c84 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -42,9 +42,10 @@ config MICROBLAZE
 	select CPU_NO_EFFICIENT_FFS
 	select MMU_GATHER_NO_RANGE
 	select SPARSE_IRQ
-	select SET_FS
 	select ZONE_DMA
 	select TRACE_IRQFLAGS_SUPPORT
+	select GENERIC_IRQ_MULTI_HANDLER
+	select HANDLE_DOMAIN_IRQ
 
 # Endianness selection
 choice
diff --git a/arch/microblaze/include/asm/irq.h b/arch/microblaze/include/asm/irq.h
index 0a28e80bbab0..cb6ab55d1d01 100644
--- a/arch/microblaze/include/asm/irq.h
+++ b/arch/microblaze/include/asm/irq.h
@@ -11,7 +11,4 @@
 struct pt_regs;
 extern void do_IRQ(struct pt_regs *regs);
 
-/* should be defined in each interrupt controller driver */
-extern unsigned int xintc_get_irq(void);
-
 #endif /* _ASM_MICROBLAZE_IRQ_H */
diff --git a/arch/microblaze/include/asm/pgtable.h b/arch/microblaze/include/asm/pgtable.h
index c136a01e467e..0c72646370e1 100644
--- a/arch/microblaze/include/asm/pgtable.h
+++ b/arch/microblaze/include/asm/pgtable.h
@@ -399,6 +399,9 @@ static inline unsigned long pmd_page_vaddr(pmd_t pmd)
 	return ((unsigned long) (pmd_val(pmd) & PAGE_MASK));
 }
 
+/* returns pfn of the pmd entry*/
+#define pmd_pfn(pmd)	(__pa(pmd_val(pmd)) >> PAGE_SHIFT)
+
 /* returns struct *page of the pmd entry*/
 #define pmd_page(pmd)	(pfn_to_page(__pa(pmd_val(pmd)) >> PAGE_SHIFT))
 
diff --git a/arch/microblaze/include/asm/thread_info.h b/arch/microblaze/include/asm/thread_info.h
index 44f5ca331862..a0ddd2a36fb9 100644
--- a/arch/microblaze/include/asm/thread_info.h
+++ b/arch/microblaze/include/asm/thread_info.h
@@ -56,17 +56,12 @@ struct cpu_context {
 	__u32	fsr;
 };
 
-typedef struct {
-	unsigned long seg;
-} mm_segment_t;
-
 struct thread_info {
 	struct task_struct	*task; /* main task structure */
 	unsigned long		flags; /* low level flags */
 	unsigned long		status; /* thread-synchronous flags */
 	__u32			cpu; /* current CPU */
 	__s32			preempt_count; /* 0 => preemptable,< 0 => BUG*/
-	mm_segment_t		addr_limit; /* thread address space */
 
 	struct cpu_context	cpu_context;
 };
@@ -80,7 +75,6 @@ struct thread_info {
 	.flags		= 0,			\
 	.cpu		= 0,			\
 	.preempt_count	= INIT_PREEMPT_COUNT,	\
-	.addr_limit	= KERNEL_DS,		\
 }
 
 /* how to get the thread information struct from C */
diff --git a/arch/microblaze/include/asm/uaccess.h b/arch/microblaze/include/asm/uaccess.h
index d2a8ef9f8978..3aab2f17e046 100644
--- a/arch/microblaze/include/asm/uaccess.h
+++ b/arch/microblaze/include/asm/uaccess.h
@@ -15,48 +15,7 @@
 #include <linux/pgtable.h>
 #include <asm/extable.h>
 #include <linux/string.h>
-
-/*
- * On Microblaze the fs value is actually the top of the corresponding
- * address space.
- *
- * The fs value determines whether argument validity checking should be
- * performed or not. If get_fs() == USER_DS, checking is performed, with
- * get_fs() == KERNEL_DS, checking is bypassed.
- *
- * For historical reasons, these macros are grossly misnamed.
- *
- * For non-MMU arch like Microblaze, KERNEL_DS and USER_DS is equal.
- */
-# define MAKE_MM_SEG(s)       ((mm_segment_t) { (s) })
-
-#  define KERNEL_DS	MAKE_MM_SEG(0xFFFFFFFF)
-#  define USER_DS	MAKE_MM_SEG(TASK_SIZE - 1)
-
-# define get_fs()	(current_thread_info()->addr_limit)
-# define set_fs(val)	(current_thread_info()->addr_limit = (val))
-# define user_addr_max() get_fs().seg
-
-# define uaccess_kernel()	(get_fs().seg == KERNEL_DS.seg)
-
-static inline int access_ok(const void __user *addr, unsigned long size)
-{
-	if (!size)
-		goto ok;
-
-	if ((get_fs().seg < ((unsigned long)addr)) ||
-			(get_fs().seg < ((unsigned long)addr + size - 1))) {
-		pr_devel("ACCESS fail at 0x%08x (size 0x%x), seg 0x%08x\n",
-			(__force u32)addr, (u32)size,
-			(u32)get_fs().seg);
-		return 0;
-	}
-ok:
-	pr_devel("ACCESS OK at 0x%08x (size 0x%x), seg 0x%08x\n",
-			(__force u32)addr, (u32)size,
-			(u32)get_fs().seg);
-	return 1;
-}
+#include <asm-generic/access_ok.h>
 
 # define __FIXUP_SECTION	".section .fixup,\"ax\"\n"
 # define __EX_TABLE_SECTION	".section __ex_table,\"a\"\n"
@@ -141,27 +100,27 @@ extern long __user_bad(void);
 
 #define __get_user(x, ptr)						\
 ({									\
-	unsigned long __gu_val = 0;					\
 	long __gu_err;							\
 	switch (sizeof(*(ptr))) {					\
 	case 1:								\
-		__get_user_asm("lbu", (ptr), __gu_val, __gu_err);	\
+		__get_user_asm("lbu", (ptr), x, __gu_err);		\
 		break;							\
 	case 2:								\
-		__get_user_asm("lhu", (ptr), __gu_val, __gu_err);	\
+		__get_user_asm("lhu", (ptr), x, __gu_err);		\
 		break;							\
 	case 4:								\
-		__get_user_asm("lw", (ptr), __gu_val, __gu_err);	\
+		__get_user_asm("lw", (ptr), x, __gu_err);		\
 		break;							\
-	case 8:								\
-		__gu_err = __copy_from_user(&__gu_val, ptr, 8);		\
-		if (__gu_err)						\
-			__gu_err = -EFAULT;				\
+	case 8: {							\
+		__u64 __x = 0;						\
+		__gu_err = raw_copy_from_user(&__x, ptr, 8) ?		\
+							-EFAULT : 0;	\
+		(x) = (typeof(x))(typeof((x) - (x)))__x;		\
 		break;							\
+	}								\
 	default:							\
 		/* __gu_val = 0; __gu_err = -EINVAL;*/ __gu_err = __user_bad();\
 	}								\
-	x = (__force __typeof__(*(ptr))) __gu_val;			\
 	__gu_err;							\
 })
 
diff --git a/arch/microblaze/kernel/asm-offsets.c b/arch/microblaze/kernel/asm-offsets.c
index b77dd188dec4..47ee409508b1 100644
--- a/arch/microblaze/kernel/asm-offsets.c
+++ b/arch/microblaze/kernel/asm-offsets.c
@@ -86,7 +86,6 @@ int main(int argc, char *argv[])
 	/* struct thread_info */
 	DEFINE(TI_TASK, offsetof(struct thread_info, task));
 	DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
-	DEFINE(TI_ADDR_LIMIT, offsetof(struct thread_info, addr_limit));
 	DEFINE(TI_CPU_CONTEXT, offsetof(struct thread_info, cpu_context));
 	DEFINE(TI_PREEMPT_COUNT, offsetof(struct thread_info, preempt_count));
 	BLANK();
diff --git a/arch/microblaze/kernel/irq.c b/arch/microblaze/kernel/irq.c
index 903dad822fad..1f8cb4c4f74f 100644
--- a/arch/microblaze/kernel/irq.c
+++ b/arch/microblaze/kernel/irq.c
@@ -20,27 +20,13 @@
 #include <linux/irqchip.h>
 #include <linux/of_irq.h>
 
-static u32 concurrent_irq;
-
 void __irq_entry do_IRQ(struct pt_regs *regs)
 {
-	unsigned int irq;
 	struct pt_regs *old_regs = set_irq_regs(regs);
 	trace_hardirqs_off();
 
 	irq_enter();
-	irq = xintc_get_irq();
-next_irq:
-	BUG_ON(!irq);
-	generic_handle_irq(irq);
-
-	irq = xintc_get_irq();
-	if (irq != -1U) {
-		pr_debug("next irq: %d\n", irq);
-		++concurrent_irq;
-		goto next_irq;
-	}
-
+	handle_arch_irq(regs);
 	irq_exit();
 	set_irq_regs(old_regs);
 	trace_hardirqs_on();
diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c
index 5e2b91c1e8ce..1b944d319d73 100644
--- a/arch/microblaze/kernel/process.c
+++ b/arch/microblaze/kernel/process.c
@@ -18,7 +18,6 @@
 #include <linux/tick.h>
 #include <linux/bitops.h>
 #include <linux/ptrace.h>
-#include <linux/uaccess.h> /* for USER_DS macros */
 #include <asm/cacheflush.h>
 
 void show_regs(struct pt_regs *regs)
diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts
index 3e336b3dbb10..ab6e3dc0bc1d 100644
--- a/arch/mips/boot/dts/ingenic/ci20.dts
+++ b/arch/mips/boot/dts/ingenic/ci20.dts
@@ -83,6 +83,8 @@
 		label = "HDMI OUT";
 		type = "a";
 
+		ddc-en-gpios = <&gpa 25 GPIO_ACTIVE_HIGH>;
+
 		port {
 			hdmi_con: endpoint {
 				remote-endpoint = <&dw_hdmi_out>;
@@ -114,17 +116,6 @@
 		gpio = <&gpf 14 GPIO_ACTIVE_LOW>;
 		enable-active-high;
 	};
-
-	hdmi_power: fixedregulator@3 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "hdmi_power";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-
-		gpio = <&gpa 25 0>;
-		enable-active-high;
-	};
 };
 
 &ext {
@@ -576,8 +567,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pins_hdmi_ddc>;
 
-	hdmi-5v-supply = <&hdmi_power>;
-
 	ports {
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/mips/cavium-octeon/octeon-memcpy.S b/arch/mips/cavium-octeon/octeon-memcpy.S
index 0a515cde1c18..25860fba6218 100644
--- a/arch/mips/cavium-octeon/octeon-memcpy.S
+++ b/arch/mips/cavium-octeon/octeon-memcpy.S
@@ -74,7 +74,7 @@
 #define EXC(inst_reg,addr,handler)		\
 9:	inst_reg, addr;				\
 	.section __ex_table,"a";		\
-	PTR	9b, handler;			\
+	PTR_WD	9b, handler;			\
 	.previous
 
 /*
diff --git a/arch/mips/configs/cobalt_defconfig b/arch/mips/configs/cobalt_defconfig
index c6a652ad34f7..e835730ea7fa 100644
--- a/arch/mips/configs/cobalt_defconfig
+++ b/arch/mips/configs/cobalt_defconfig
@@ -69,6 +69,5 @@ CONFIG_CONFIGFS_FS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
 CONFIG_LIBCRC32C=y
diff --git a/arch/mips/configs/decstation_64_defconfig b/arch/mips/configs/decstation_64_defconfig
index e2ed105f8c97..0021427a1bbe 100644
--- a/arch/mips/configs/decstation_64_defconfig
+++ b/arch/mips/configs/decstation_64_defconfig
@@ -159,7 +159,6 @@ CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_SWAP=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 CONFIG_NLS_ISO8859_8=m
diff --git a/arch/mips/configs/decstation_defconfig b/arch/mips/configs/decstation_defconfig
index 7e987d6f5e34..7a97a0818ce4 100644
--- a/arch/mips/configs/decstation_defconfig
+++ b/arch/mips/configs/decstation_defconfig
@@ -154,7 +154,6 @@ CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_SWAP=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 CONFIG_NLS_ISO8859_8=m
diff --git a/arch/mips/configs/decstation_r4k_defconfig b/arch/mips/configs/decstation_r4k_defconfig
index 6df5f6f2ac8e..a0643363526d 100644
--- a/arch/mips/configs/decstation_r4k_defconfig
+++ b/arch/mips/configs/decstation_r4k_defconfig
@@ -154,7 +154,6 @@ CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_SWAP=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 CONFIG_NLS_ISO8859_8=m
diff --git a/arch/mips/configs/ip22_defconfig b/arch/mips/configs/ip22_defconfig
index 21a1168ae301..70a4ba90f491 100644
--- a/arch/mips/configs/ip22_defconfig
+++ b/arch/mips/configs/ip22_defconfig
@@ -269,7 +269,6 @@ CONFIG_UFS_FS=m
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
 CONFIG_CIFS=m
 CONFIG_CIFS_UPCALL=y
diff --git a/arch/mips/configs/ip32_defconfig b/arch/mips/configs/ip32_defconfig
index 1ae48f7d9ddd..74020aa3440b 100644
--- a/arch/mips/configs/ip32_defconfig
+++ b/arch/mips/configs/ip32_defconfig
@@ -112,7 +112,6 @@ CONFIG_CONFIGFS_FS=y
 CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
 CONFIG_CIFS=m
 CONFIG_NLS=y
 CONFIG_NLS_CODEPAGE_437=m
diff --git a/arch/mips/configs/jazz_defconfig b/arch/mips/configs/jazz_defconfig
index 8c223035921f..843f360da5f2 100644
--- a/arch/mips/configs/jazz_defconfig
+++ b/arch/mips/configs/jazz_defconfig
@@ -92,5 +92,4 @@ CONFIG_TMPFS=y
 CONFIG_UFS_FS=m
 CONFIG_NFS_FS=m
 CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
 CONFIG_CIFS=m
diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig
index 3321bb576944..1c220d152a50 100644
--- a/arch/mips/configs/malta_defconfig
+++ b/arch/mips/configs/malta_defconfig
@@ -363,7 +363,6 @@ CONFIG_UFS_FS=m
 CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_737=m
 CONFIG_NLS_CODEPAGE_775=m
diff --git a/arch/mips/configs/malta_kvm_defconfig b/arch/mips/configs/malta_kvm_defconfig
index 009b30372226..b5ba08d7ab57 100644
--- a/arch/mips/configs/malta_kvm_defconfig
+++ b/arch/mips/configs/malta_kvm_defconfig
@@ -371,7 +371,6 @@ CONFIG_UFS_FS=m
 CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_737=m
 CONFIG_NLS_CODEPAGE_775=m
diff --git a/arch/mips/configs/maltaup_xpa_defconfig b/arch/mips/configs/maltaup_xpa_defconfig
index e214e136101c..8d58653f1b4e 100644
--- a/arch/mips/configs/maltaup_xpa_defconfig
+++ b/arch/mips/configs/maltaup_xpa_defconfig
@@ -370,7 +370,6 @@ CONFIG_UFS_FS=m
 CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_737=m
 CONFIG_NLS_CODEPAGE_775=m
diff --git a/arch/mips/configs/rm200_defconfig b/arch/mips/configs/rm200_defconfig
index 3dc2da2bee0d..7d6f235e8ccb 100644
--- a/arch/mips/configs/rm200_defconfig
+++ b/arch/mips/configs/rm200_defconfig
@@ -354,7 +354,6 @@ CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 CONFIG_NFS_FS=m
 CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
 CONFIG_CIFS=m
 CONFIG_CODA_FS=m
 CONFIG_AFS_FS=m
diff --git a/arch/mips/configs/tb0219_defconfig b/arch/mips/configs/tb0219_defconfig
index 6547f84750b5..c56d8ab14ba6 100644
--- a/arch/mips/configs/tb0219_defconfig
+++ b/arch/mips/configs/tb0219_defconfig
@@ -72,6 +72,5 @@ CONFIG_ROMFS_FS=m
 CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="cca=3 mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs"
diff --git a/arch/mips/configs/tb0226_defconfig b/arch/mips/configs/tb0226_defconfig
index 7e099f7c2286..6e1423428f02 100644
--- a/arch/mips/configs/tb0226_defconfig
+++ b/arch/mips/configs/tb0226_defconfig
@@ -67,6 +67,5 @@ CONFIG_ROMFS_FS=m
 CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="cca=3 mem=32M console=ttyVR0,115200"
diff --git a/arch/mips/configs/tb0287_defconfig b/arch/mips/configs/tb0287_defconfig
index 0d881dd862c0..cf65a0879ece 100644
--- a/arch/mips/configs/tb0287_defconfig
+++ b/arch/mips/configs/tb0287_defconfig
@@ -77,7 +77,6 @@ CONFIG_ROMFS_FS=m
 CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
 CONFIG_FONTS=y
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
diff --git a/arch/mips/configs/workpad_defconfig b/arch/mips/configs/workpad_defconfig
index 4798dc86c9ce..7e16da0bde8c 100644
--- a/arch/mips/configs/workpad_defconfig
+++ b/arch/mips/configs/workpad_defconfig
@@ -63,6 +63,5 @@ CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 CONFIG_NFS_FS=m
 CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttyVR0,19200 ide0=0x170,0x376,49 mem=16M"
diff --git a/arch/mips/include/asm/pgtable.h b/arch/mips/include/asm/pgtable.h
index 7b8037f25d9e..374c6322775d 100644
--- a/arch/mips/include/asm/pgtable.h
+++ b/arch/mips/include/asm/pgtable.h
@@ -86,6 +86,11 @@ extern void paging_init(void);
  */
 #define pmd_phys(pmd)		virt_to_phys((void *)pmd_val(pmd))
 
+static inline unsigned long pmd_pfn(pmd_t pmd)
+{
+	return pmd_val(pmd) >> _PFN_SHIFT;
+}
+
 #ifndef CONFIG_MIPS_HUGE_TLB_SUPPORT
 #define pmd_page(pmd)		(pfn_to_page(pmd_phys(pmd) >> PAGE_SHIFT))
 #endif /* CONFIG_MIPS_HUGE_TLB_SUPPORT */
@@ -422,11 +427,6 @@ static inline int pmd_write(pmd_t pmd)
 	return !!(pmd_val(pmd) & _PAGE_WRITE);
 }
 
-static inline unsigned long pmd_pfn(pmd_t pmd)
-{
-	return pmd_val(pmd) >> _PFN_SHIFT;
-}
-
 static inline struct page *pmd_page(pmd_t pmd)
 {
 	if (pmd_val(pmd) & _PAGE_HUGE)
diff --git a/arch/mips/include/asm/uaccess.h b/arch/mips/include/asm/uaccess.h
index f8f74f9f5883..c0cede273c7c 100644
--- a/arch/mips/include/asm/uaccess.h
+++ b/arch/mips/include/asm/uaccess.h
@@ -19,6 +19,7 @@
 #ifdef CONFIG_32BIT
 
 #define __UA_LIMIT 0x80000000UL
+#define TASK_SIZE_MAX	KSEG0
 
 #define __UA_ADDR	".word"
 #define __UA_LA		"la"
@@ -33,6 +34,7 @@
 extern u64 __ua_limit;
 
 #define __UA_LIMIT	__ua_limit
+#define TASK_SIZE_MAX	XKSSEG
 
 #define __UA_ADDR	".dword"
 #define __UA_LA		"dla"
@@ -42,50 +44,7 @@ extern u64 __ua_limit;
 
 #endif /* CONFIG_64BIT */
 
-/*
- * Is a address valid? This does a straightforward calculation rather
- * than tests.
- *
- * Address valid if:
- *  - "addr" doesn't have any high-bits set
- *  - AND "size" doesn't have any high-bits set
- *  - AND "addr+size" doesn't have any high-bits set
- *  - OR we are in kernel mode.
- *
- * __ua_size() is a trick to avoid runtime checking of positive constant
- * sizes; for those we already know at compile time that the size is ok.
- */
-#define __ua_size(size)							\
-	((__builtin_constant_p(size) && (signed long) (size) > 0) ? 0 : (size))
-
-/*
- * access_ok: - Checks if a user space pointer is valid
- * @addr: User space pointer to start of block to check
- * @size: Size of block to check
- *
- * Context: User context only. This function may sleep if pagefaults are
- *          enabled.
- *
- * Checks if a pointer to a block of memory in user space is valid.
- *
- * Returns true (nonzero) if the memory block may be valid, false (zero)
- * if it is definitely invalid.
- *
- * Note that, depending on architecture, this function probably just
- * checks that the pointer is in the user space range - after calling
- * this function, memory access functions may still return -EFAULT.
- */
-
-static inline int __access_ok(const void __user *p, unsigned long size)
-{
-	unsigned long addr = (unsigned long)p;
-	unsigned long end = addr + size - !!size;
-
-	return (__UA_LIMIT & (addr | end | __ua_size(size))) == 0;
-}
-
-#define access_ok(addr, size)					\
-	likely(__access_ok((addr), (size)))
+#include <asm-generic/access_ok.h>
 
 /*
  * put_user: - Write a simple value into user space.
@@ -296,8 +255,6 @@ struct __large_struct { unsigned long buf[100]; };
 	(val) = __gu_tmp.t;						\
 }
 
-#define HAVE_GET_KERNEL_NOFAULT
-
 #define __get_kernel_nofault(dst, src, type, err_label)			\
 do {									\
 	int __gu_err;							\
diff --git a/arch/mips/include/uapi/asm/shmbuf.h b/arch/mips/include/uapi/asm/shmbuf.h
index 680bb95b2240..eb74d304b779 100644
--- a/arch/mips/include/uapi/asm/shmbuf.h
+++ b/arch/mips/include/uapi/asm/shmbuf.h
@@ -2,6 +2,9 @@
 #ifndef _ASM_SHMBUF_H
 #define _ASM_SHMBUF_H
 
+#include <asm/ipcbuf.h>
+#include <asm/posix_types.h>
+
 /*
  * The shmid64_ds structure for the MIPS architecture.
  * Note extra padding because this structure is passed back and forth
@@ -16,7 +19,7 @@
 #ifdef __mips64
 struct shmid64_ds {
 	struct ipc64_perm	shm_perm;	/* operation perms */
-	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_size_t		shm_segsz;	/* size of segment (bytes) */
 	long			shm_atime;	/* last attach time */
 	long			shm_dtime;	/* last detach time */
 	long			shm_ctime;	/* last change time */
@@ -29,7 +32,7 @@ struct shmid64_ds {
 #else
 struct shmid64_ds {
 	struct ipc64_perm	shm_perm;	/* operation perms */
-	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_size_t		shm_segsz;	/* size of segment (bytes) */
 	unsigned long		shm_atime;	/* last attach time */
 	unsigned long		shm_dtime;	/* last detach time */
 	unsigned long		shm_ctime;	/* last change time */
diff --git a/arch/mips/include/uapi/asm/signal.h b/arch/mips/include/uapi/asm/signal.h
index e6c78a15cb2f..94a00f82e373 100644
--- a/arch/mips/include/uapi/asm/signal.h
+++ b/arch/mips/include/uapi/asm/signal.h
@@ -100,7 +100,7 @@ struct sigaction {
 /* IRIX compatible stack_t  */
 typedef struct sigaltstack {
 	void __user *ss_sp;
-	size_t ss_size;
+	__kernel_size_t ss_size;
 	int ss_flags;
 } stack_t;
 
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index f979adfd4fc2..ef73ba1e0ec1 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -803,7 +803,7 @@ early_param("coherentio", setcoherentio);
 
 static int __init setnocoherentio(char *str)
 {
-	dma_default_coherent = true;
+	dma_default_coherent = false;
 	pr_info("Software DMA cache coherency (command line)\n");
 	return 0;
 }
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index d542fb7af3ba..1986d1309410 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -351,6 +351,9 @@ asmlinkage void start_secondary(void)
 	cpu = smp_processor_id();
 	cpu_data[cpu].udelay_val = loops_per_jiffy;
 
+	set_cpu_sibling_map(cpu);
+	set_cpu_core_map(cpu);
+
 	cpumask_set_cpu(cpu, &cpu_coherent_mask);
 	notify_cpu_starting(cpu);
 
@@ -362,9 +365,6 @@ asmlinkage void start_secondary(void)
 	/* The CPU is running and counters synchronised, now mark it online */
 	set_cpu_online(cpu, true);
 
-	set_cpu_sibling_map(cpu);
-	set_cpu_core_map(cpu);
-
 	calculate_cpu_foreign_map();
 
 	/*
diff --git a/arch/mips/kernel/topology.c b/arch/mips/kernel/topology.c
index 08ad6371fbe0..9429d85a4703 100644
--- a/arch/mips/kernel/topology.c
+++ b/arch/mips/kernel/topology.c
@@ -12,11 +12,6 @@ static int __init topology_init(void)
 {
 	int i, ret;
 
-#ifdef CONFIG_NUMA
-	for_each_online_node(i)
-		register_one_node(i);
-#endif /* CONFIG_NUMA */
-
 	for_each_present_cpu(i) {
 		struct cpu *c = &per_cpu(cpu_devices, i);
 
diff --git a/arch/mips/kernel/unaligned.c b/arch/mips/kernel/unaligned.c
index df4b708c04a9..7b5aba5df02e 100644
--- a/arch/mips/kernel/unaligned.c
+++ b/arch/mips/kernel/unaligned.c
@@ -1480,6 +1480,23 @@ asmlinkage void do_ade(struct pt_regs *regs)
 	prev_state = exception_enter();
 	perf_sw_event(PERF_COUNT_SW_ALIGNMENT_FAULTS,
 			1, regs, regs->cp0_badvaddr);
+
+#ifdef CONFIG_64BIT
+	/*
+	 * check, if we are hitting space between CPU implemented maximum
+	 * virtual user address and 64bit maximum virtual user address
+	 * and do exception handling to get EFAULTs for get_user/put_user
+	 */
+	if ((regs->cp0_badvaddr >= (1UL << cpu_vmbits)) &&
+	    (regs->cp0_badvaddr < XKSSEG)) {
+		if (fixup_exception(regs)) {
+			current->thread.cp0_baduaddr = regs->cp0_badvaddr;
+			return;
+		}
+		goto sigbus;
+	}
+#endif
+
 	/*
 	 * Did we catch a fault trying to load an instruction?
 	 */
diff --git a/arch/mips/kvm/mips.c b/arch/mips/kvm/mips.c
index e59cb6246f76..a25e0b73ee70 100644
--- a/arch/mips/kvm/mips.c
+++ b/arch/mips/kvm/mips.c
@@ -414,6 +414,24 @@ int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu,
 	return -ENOIOCTLCMD;
 }
 
+/*
+ * Actually run the vCPU, entering an RCU extended quiescent state (EQS) while
+ * the vCPU is running.
+ *
+ * This must be noinstr as instrumentation may make use of RCU, and this is not
+ * safe during the EQS.
+ */
+static int noinstr kvm_mips_vcpu_enter_exit(struct kvm_vcpu *vcpu)
+{
+	int ret;
+
+	guest_state_enter_irqoff();
+	ret = kvm_mips_callbacks->vcpu_run(vcpu);
+	guest_state_exit_irqoff();
+
+	return ret;
+}
+
 int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu)
 {
 	int r = -EINTR;
@@ -434,7 +452,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu)
 	lose_fpu(1);
 
 	local_irq_disable();
-	guest_enter_irqoff();
+	guest_timing_enter_irqoff();
 	trace_kvm_enter(vcpu);
 
 	/*
@@ -445,10 +463,23 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu)
 	 */
 	smp_store_mb(vcpu->mode, IN_GUEST_MODE);
 
-	r = kvm_mips_callbacks->vcpu_run(vcpu);
+	r = kvm_mips_vcpu_enter_exit(vcpu);
+
+	/*
+	 * We must ensure that any pending interrupts are taken before
+	 * we exit guest timing so that timer ticks are accounted as
+	 * guest time. Transiently unmask interrupts so that any
+	 * pending interrupts are taken.
+	 *
+	 * TODO: is there a barrier which ensures that pending interrupts are
+	 * recognised? Currently this just hopes that the CPU takes any pending
+	 * interrupts between the enable and disable.
+	 */
+	local_irq_enable();
+	local_irq_disable();
 
 	trace_kvm_out(vcpu);
-	guest_exit_irqoff();
+	guest_timing_exit_irqoff();
 	local_irq_enable();
 
 out:
@@ -1168,7 +1199,7 @@ static void kvm_mips_set_c0_status(void)
 /*
  * Return value is in the form (errcode<<2 | RESUME_FLAG_HOST | RESUME_FLAG_NV)
  */
-int kvm_mips_handle_exit(struct kvm_vcpu *vcpu)
+static int __kvm_mips_handle_exit(struct kvm_vcpu *vcpu)
 {
 	struct kvm_run *run = vcpu->run;
 	u32 cause = vcpu->arch.host_cp0_cause;
@@ -1357,6 +1388,17 @@ int kvm_mips_handle_exit(struct kvm_vcpu *vcpu)
 	return ret;
 }
 
+int noinstr kvm_mips_handle_exit(struct kvm_vcpu *vcpu)
+{
+	int ret;
+
+	guest_state_exit_irqoff();
+	ret = __kvm_mips_handle_exit(vcpu);
+	guest_state_enter_irqoff();
+
+	return ret;
+}
+
 /* Enable FPU for guest and restore context */
 void kvm_own_fpu(struct kvm_vcpu *vcpu)
 {
diff --git a/arch/mips/kvm/vz.c b/arch/mips/kvm/vz.c
index 4adca5abbc72..c706f5890a05 100644
--- a/arch/mips/kvm/vz.c
+++ b/arch/mips/kvm/vz.c
@@ -458,8 +458,8 @@ void kvm_vz_acquire_htimer(struct kvm_vcpu *vcpu)
 /**
  * _kvm_vz_save_htimer() - Switch to software emulation of guest timer.
  * @vcpu:	Virtual CPU.
- * @compare:	Pointer to write compare value to.
- * @cause:	Pointer to write cause value to.
+ * @out_compare: Pointer to write compare value to.
+ * @out_cause:	Pointer to write cause value to.
  *
  * Save VZ guest timer state and switch to software emulation of guest CP0
  * timer. The hard timer must already be in use, so preemption should be
@@ -1541,11 +1541,14 @@ static int kvm_trap_vz_handle_guest_exit(struct kvm_vcpu *vcpu)
 }
 
 /**
- * kvm_trap_vz_handle_cop_unusuable() - Guest used unusable coprocessor.
+ * kvm_trap_vz_handle_cop_unusable() - Guest used unusable coprocessor.
  * @vcpu:	Virtual CPU context.
  *
  * Handle when the guest attempts to use a coprocessor which hasn't been allowed
  * by the root context.
+ *
+ * Return: value indicating whether to resume the host or the guest
+ * 	   (RESUME_HOST or RESUME_GUEST)
  */
 static int kvm_trap_vz_handle_cop_unusable(struct kvm_vcpu *vcpu)
 {
@@ -1592,6 +1595,9 @@ static int kvm_trap_vz_handle_cop_unusable(struct kvm_vcpu *vcpu)
  *
  * Handle when the guest attempts to use MSA when it is disabled in the root
  * context.
+ *
+ * Return: value indicating whether to resume the host or the guest
+ * 	   (RESUME_HOST or RESUME_GUEST)
  */
 static int kvm_trap_vz_handle_msa_disabled(struct kvm_vcpu *vcpu)
 {
diff --git a/arch/mips/ralink/mt7621.c b/arch/mips/ralink/mt7621.c
index d6efffd4dd20..fb0565bc34fd 100644
--- a/arch/mips/ralink/mt7621.c
+++ b/arch/mips/ralink/mt7621.c
@@ -22,7 +22,9 @@
 
 #include "common.h"
 
-static void *detect_magic __initdata = detect_memory_region;
+#define MT7621_MEM_TEST_PATTERN         0xaa5555aa
+
+static u32 detect_magic __initdata;
 
 int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
 {
@@ -58,24 +60,32 @@ phys_addr_t mips_cpc_default_phys_base(void)
 	panic("Cannot detect cpc address");
 }
 
+static bool __init mt7621_addr_wraparound_test(phys_addr_t size)
+{
+	void *dm = (void *)KSEG1ADDR(&detect_magic);
+
+	if (CPHYSADDR(dm + size) >= MT7621_LOWMEM_MAX_SIZE)
+		return true;
+	__raw_writel(MT7621_MEM_TEST_PATTERN, dm);
+	if (__raw_readl(dm) != __raw_readl(dm + size))
+		return false;
+	__raw_writel(~MT7621_MEM_TEST_PATTERN, dm);
+	return __raw_readl(dm) == __raw_readl(dm + size);
+}
+
 static void __init mt7621_memory_detect(void)
 {
-	void *dm = &detect_magic;
 	phys_addr_t size;
 
-	for (size = 32 * SZ_1M; size < 256 * SZ_1M; size <<= 1) {
-		if (!__builtin_memcmp(dm, dm + size, sizeof(detect_magic)))
-			break;
+	for (size = 32 * SZ_1M; size <= 256 * SZ_1M; size <<= 1) {
+		if (mt7621_addr_wraparound_test(size)) {
+			memblock_add(MT7621_LOWMEM_BASE, size);
+			return;
+		}
 	}
 
-	if ((size == 256 * SZ_1M) &&
-	    (CPHYSADDR(dm + size) < MT7621_LOWMEM_MAX_SIZE) &&
-	    __builtin_memcmp(dm, dm + size, sizeof(detect_magic))) {
-		memblock_add(MT7621_LOWMEM_BASE, MT7621_LOWMEM_MAX_SIZE);
-		memblock_add(MT7621_HIGHMEM_BASE, MT7621_HIGHMEM_SIZE);
-	} else {
-		memblock_add(MT7621_LOWMEM_BASE, size);
-	}
+	memblock_add(MT7621_LOWMEM_BASE, MT7621_LOWMEM_MAX_SIZE);
+	memblock_add(MT7621_HIGHMEM_BASE, MT7621_HIGHMEM_SIZE);
 }
 
 void __init ralink_of_remap(void)
diff --git a/arch/nds32/Kbuild b/arch/nds32/Kbuild
deleted file mode 100644
index 4e39f7abdeb6..000000000000
--- a/arch/nds32/Kbuild
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-
-# for cleaning
-subdir- += boot
diff --git a/arch/nds32/Kconfig b/arch/nds32/Kconfig
deleted file mode 100644
index 4d1421b18734..000000000000
--- a/arch/nds32/Kconfig
+++ /dev/null
@@ -1,102 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# For a description of the syntax of this configuration file,
-# see Documentation/kbuild/kconfig-language.rst.
-#
-
-config NDS32
-	def_bool y
-	select ARCH_32BIT_OFF_T
-	select ARCH_HAS_DMA_PREP_COHERENT
-	select ARCH_HAS_SYNC_DMA_FOR_CPU
-	select ARCH_HAS_SYNC_DMA_FOR_DEVICE
-	select ARCH_WANT_FRAME_POINTERS if FTRACE
-	select CLKSRC_MMIO
-	select CLONE_BACKWARDS
-	select COMMON_CLK
-	select DMA_DIRECT_REMAP
-	select GENERIC_ATOMIC64
-	select GENERIC_CPU_DEVICES
-	select GENERIC_IRQ_CHIP
-	select GENERIC_IRQ_SHOW
-	select GENERIC_IOREMAP
-	select GENERIC_LIB_ASHLDI3
-	select GENERIC_LIB_ASHRDI3
-	select GENERIC_LIB_CMPDI2
-	select GENERIC_LIB_LSHRDI3
-	select GENERIC_LIB_MULDI3
-	select GENERIC_LIB_UCMPDI2
-	select GENERIC_TIME_VSYSCALL
-	select HAVE_ARCH_TRACEHOOK
-	select HAVE_DEBUG_KMEMLEAK
-	select HAVE_EXIT_THREAD
-	select HAVE_REGS_AND_STACK_ACCESS_API
-	select HAVE_PERF_EVENTS
-	select IRQ_DOMAIN
-	select LOCKDEP_SUPPORT
-	select MODULES_USE_ELF_RELA
-	select OF
-	select OF_EARLY_FLATTREE
-	select NO_IOPORT_MAP
-	select RTC_LIB
-	select THREAD_INFO_IN_TASK
-	select HAVE_FUNCTION_TRACER
-	select HAVE_FUNCTION_GRAPH_TRACER
-	select HAVE_FTRACE_MCOUNT_RECORD
-	select HAVE_DYNAMIC_FTRACE
-	select SET_FS
-	select TRACE_IRQFLAGS_SUPPORT
-	help
-	  Andes(nds32) Linux support.
-
-config GENERIC_CALIBRATE_DELAY
-	def_bool y
-
-config GENERIC_CSUM
-	def_bool y
-
-config GENERIC_HWEIGHT
-	def_bool y
-
-config GENERIC_LOCKBREAK
-	def_bool y
-	depends on PREEMPTION
-
-config STACKTRACE_SUPPORT
-	def_bool y
-
-config FIX_EARLYCON_MEM
-	def_bool y
-
-config PGTABLE_LEVELS
-	default 2
-
-menu "System Type"
-source "arch/nds32/Kconfig.cpu"
-config NR_CPUS
-	int
-	default 1
-
-config MMU
-	def_bool y
-
-config NDS32_BUILTIN_DTB
-	string "Builtin DTB"
-	default ""
-	help
-	  User can use it to specify the dts of the SoC
-endmenu
-
-menu "Kernel Features"
-source "kernel/Kconfig.hz"
-endmenu
-
-menu "Power management options"
-config SYS_SUPPORTS_APM_EMULATION
-	bool
-
-config ARCH_SUSPEND_POSSIBLE
-	def_bool y
-
-source "kernel/power/Kconfig"
-endmenu
diff --git a/arch/nds32/Kconfig.cpu b/arch/nds32/Kconfig.cpu
deleted file mode 100644
index c10759952485..000000000000
--- a/arch/nds32/Kconfig.cpu
+++ /dev/null
@@ -1,218 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-comment "Processor Features"
-
-config CPU_BIG_ENDIAN
-	def_bool !CPU_LITTLE_ENDIAN
-
-config CPU_LITTLE_ENDIAN
-	bool "Little endian"
-	default y
-
-config FPU
-	bool "FPU support"
-	default n
-	help
-	  If FPU ISA is used in user space, this configuration shall be Y to
-          enable required support in kernel such as fpu context switch and
-          fpu exception handler.
-
-	  If no FPU ISA is used in user space, say N.
-
-config LAZY_FPU
-	bool "lazy FPU support"
-	depends on FPU
-	default y
-	help
-	  Say Y here to enable the lazy FPU scheme. The lazy FPU scheme can
-          enhance system performance by reducing the context switch
-	  frequency of the FPU register.
-
-	  For normal case, say Y.
-
-config SUPPORT_DENORMAL_ARITHMETIC
-	bool "Denormal arithmetic support"
-	depends on FPU
-	default n
-	help
-	  Say Y here to enable arithmetic of denormalized number. Enabling
-	  this feature can enhance the precision for tininess number.
-	  However, performance loss in float point calculations is
-	  possibly significant due to additional FPU exception.
-
-	  If the calculated tolerance for tininess number is not critical,
-	  say N to prevent performance loss.
-
-config HWZOL
-	bool "hardware zero overhead loop support"
-	depends on CPU_D10 || CPU_D15
-	default n
-	help
-	  A set of Zero-Overhead Loop mechanism is provided to reduce the
-	  instruction fetch and execution overhead of loop-control instructions.
-	  It will save 3 registers($LB, $LC, $LE) for context saving if say Y.
-	  You don't need to save these registers if you can make sure your user
-	  program doesn't use these registers.
-
-	  If unsure, say N.
-
-config CPU_CACHE_ALIASING
-	bool "Aliasing cache"
-	depends on CPU_N10 || CPU_D10 || CPU_N13 || CPU_V3
-	default y
-	help
-	  If this CPU is using VIPT data cache and its cache way size is larger
-	  than page size, say Y. If it is using PIPT data cache, say N.
-
-	  If unsure, say Y.
-
-choice
-	prompt "minimum CPU type"
-	default CPU_V3
-	help
-	  The data cache of N15/D15 is implemented as PIPT and it will not cause
-	  the cache aliasing issue. The rest cpus(N13, N10 and D10) are
-	  implemented as VIPT data cache. It may cause the cache aliasing issue
-	  if its cache way size is larger than page size. You can specify the
-	  CPU type directly or choose CPU_V3 if unsure.
-
-          A kernel built for N10 is able to run on N15, D15, N13, N10 or D10.
-          A kernel built for N15 is able to run on N15 or D15.
-          A kernel built for D10 is able to run on D10 or D15.
-          A kernel built for D15 is able to run on D15.
-          A kernel built for N13 is able to run on N15, N13 or D15.
-
-config CPU_N15
-	bool "AndesCore N15"
-config CPU_N13
-	bool "AndesCore N13"
-	select CPU_CACHE_ALIASING if ANDES_PAGE_SIZE_4KB
-config CPU_N10
-	bool "AndesCore N10"
-	select CPU_CACHE_ALIASING
-config CPU_D15
-	bool "AndesCore D15"
-config CPU_D10
-	bool "AndesCore D10"
-	select CPU_CACHE_ALIASING
-config CPU_V3
-	bool "AndesCore v3 compatible"
-	select CPU_CACHE_ALIASING
-endchoice
-choice
-	prompt "Paging -- page size "
-	default ANDES_PAGE_SIZE_4KB
-config  ANDES_PAGE_SIZE_4KB
-	bool "use 4KB page size"
-config  ANDES_PAGE_SIZE_8KB
-	bool "use 8KB page size"
-endchoice
-
-config CPU_ICACHE_DISABLE
-	bool "Disable I-Cache"
-	help
-	  Say Y here to disable the processor instruction cache. Unless
-	  you have a reason not to or are unsure, say N.
-
-config CPU_DCACHE_DISABLE
-	bool "Disable D-Cache"
-	help
-	  Say Y here to disable the processor data cache. Unless
-	  you have a reason not to or are unsure, say N.
-
-config CPU_DCACHE_WRITETHROUGH
-	bool "Force write through D-cache"
-	depends on !CPU_DCACHE_DISABLE
-	help
-	  Say Y here to use the data cache in writethrough mode. Unless you
-	  specifically require this or are unsure, say N.
-
-config WBNA
-	bool "WBNA"
-	default n
-	help
-	  Say Y here to enable write-back memory with no-write-allocation policy.
-
-config ALIGNMENT_TRAP
-	bool "Kernel support unaligned access handling by sw"
-	depends on PROC_FS
-	default n
-	help
-	  Andes processors cannot load/store information which is not
-	  naturally aligned on the bus, i.e., a 4 byte load must start at an
-	  address divisible by 4. On 32-bit Andes processors, these non-aligned
-	  load/store instructions will be emulated in software if you say Y
-	  here, which has a severe performance impact. With an IP-only
-	  configuration it is safe to say N, otherwise say Y.
-
-config HW_SUPPORT_UNALIGNMENT_ACCESS
-	bool "Kernel support unaligned access handling by hw"
-	depends on !ALIGNMENT_TRAP
-	default n
-	help
-	  Andes processors load/store world/half-word instructions can access
-	  unaligned memory locations without generating the Data Alignment
-	  Check exceptions. With an IP-only configuration it is safe to say N,
-	  otherwise say Y.
-
-config HIGHMEM
-	bool "High Memory Support"
-	depends on MMU && !CPU_CACHE_ALIASING
-	select KMAP_LOCAL
-	help
-	  The address space of Andes processors is only 4 Gigabytes large
-	  and it has to accommodate user address space, kernel address
-	  space as well as some memory mapped IO. That means that, if you
-	  have a large amount of physical memory and/or IO, not all of the
-	  memory can be "permanently mapped" by the kernel. The physical
-	  memory that is not permanently mapped is called "high memory".
-
-	  Depending on the selected kernel/user memory split, minimum
-	  vmalloc space and actual amount of RAM, you may not need this
-	  option which should result in a slightly faster kernel.
-
-	  If unsure, say N.
-
-config CACHE_L2
-	bool "Support L2 cache"
-        default y
-	help
-	  Say Y here to enable L2 cache if your SoC are integrated with L2CC.
-	  If unsure, say N.
-
-config HW_PRE
-	bool "Enable hardware prefetcher"
-	default y
-	help
-	  Say Y here to enable hardware prefetcher feature.
-	  Only when CPU_VER.REV >= 0x09 can support.
-
-menu "Memory configuration"
-
-choice
-	prompt "Memory split"
-	depends on MMU
-	default VMSPLIT_3G_OPT
-	help
-	  Select the desired split between kernel and user memory.
-
-	  If you are not absolutely sure what you are doing, leave this
-	  option alone!
-
-	config VMSPLIT_3G
-		bool "3G/1G user/kernel split"
-	config VMSPLIT_3G_OPT
-		bool "3G/1G user/kernel split (for full 1G low memory)"
-	config VMSPLIT_2G
-		bool "2G/2G user/kernel split"
-	config VMSPLIT_1G
-		bool "1G/3G user/kernel split"
-endchoice
-
-config PAGE_OFFSET
-	hex
-	default 0x40000000 if VMSPLIT_1G
-	default 0x80000000 if VMSPLIT_2G
-	default 0xB0000000 if VMSPLIT_3G_OPT
-	default 0xC0000000
-
-endmenu
diff --git a/arch/nds32/Kconfig.debug b/arch/nds32/Kconfig.debug
deleted file mode 100644
index 295942fe3fd5..000000000000
--- a/arch/nds32/Kconfig.debug
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-# dummy file, do not delete
diff --git a/arch/nds32/Makefile b/arch/nds32/Makefile
deleted file mode 100644
index b33d5d81b6ae..000000000000
--- a/arch/nds32/Makefile
+++ /dev/null
@@ -1,63 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-LDFLAGS_vmlinux	:= --no-undefined -X
-OBJCOPYFLAGS	:= -O binary -R .note -R .note.gnu.build-id -R .comment -S
-
-ifdef CONFIG_FUNCTION_TRACER
-arch-y += -malways-save-lp -mno-relax
-endif
-
-# Avoid generating FPU instructions
-arch-y  += -mno-ext-fpu-sp -mno-ext-fpu-dp -mfloat-abi=soft
-
-# Enable <nds32_intrinsic.h>
-KBUILD_CFLAGS	+= -isystem $(shell $(CC) -print-file-name=include)
-KBUILD_CFLAGS	+= $(call cc-option, -mno-sched-prolog-epilog)
-KBUILD_CFLAGS	+= -mcmodel=large
-
-KBUILD_CFLAGS	+=$(arch-y) $(tune-y)
-KBUILD_AFLAGS	+=$(arch-y) $(tune-y)
-
-#Default value
-head-y		 := arch/nds32/kernel/head.o
-textaddr-y	 := $(CONFIG_PAGE_OFFSET)+0xc000
-
-TEXTADDR := $(textaddr-y)
-
-export	TEXTADDR
-
-
-# If we have a machine-specific directory, then include it in the build.
-core-y				+= arch/nds32/kernel/ arch/nds32/mm/
-core-$(CONFIG_FPU)              += arch/nds32/math-emu/
-libs-y				+= arch/nds32/lib/
-
-ifdef CONFIG_CPU_LITTLE_ENDIAN
-KBUILD_CFLAGS   += $(call cc-option, -EL)
-KBUILD_AFLAGS   += $(call cc-option, -EL)
-KBUILD_LDFLAGS  += $(call cc-option, -EL)
-CHECKFLAGS      += -D__NDS32_EL__
-else
-KBUILD_CFLAGS   += $(call cc-option, -EB)
-KBUILD_AFLAGS   += $(call cc-option, -EB)
-KBUILD_LDFLAGS  += $(call cc-option, -EB)
-CHECKFLAGS      += -D__NDS32_EB__
-endif
-
-boot := arch/nds32/boot
-core-y += $(boot)/dts/
-
-Image: vmlinux
-	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
-
-
-PHONY += vdso_install
-vdso_install:
-	$(Q)$(MAKE) $(build)=arch/nds32/kernel/vdso $@
-
-prepare: vdso_prepare
-vdso_prepare: prepare0
-	$(Q)$(MAKE) $(build)=arch/nds32/kernel/vdso include/generated/vdso-offsets.h
-
-define archhelp
-  echo  '  Image         - kernel image (arch/$(ARCH)/boot/Image)'
-endef
diff --git a/arch/nds32/boot/.gitignore b/arch/nds32/boot/.gitignore
deleted file mode 100644
index 9182a3a1ea0a..000000000000
--- a/arch/nds32/boot/.gitignore
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-/Image
diff --git a/arch/nds32/boot/Makefile b/arch/nds32/boot/Makefile
deleted file mode 100644
index c4cc0c2689f7..000000000000
--- a/arch/nds32/boot/Makefile
+++ /dev/null
@@ -1,16 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-targets := Image Image.gz
-
-$(obj)/Image: vmlinux FORCE
-	$(call if_changed,objcopy)
-
-$(obj)/Image.gz: $(obj)/Image FORCE
-	$(call if_changed,gzip)
-
-install: $(obj)/Image
-	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
-	$(obj)/Image System.map "$(INSTALL_PATH)"
-
-zinstall: $(obj)/Image.gz
-	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
-	$(obj)/Image.gz System.map "$(INSTALL_PATH)"
diff --git a/arch/nds32/boot/dts/Makefile b/arch/nds32/boot/dts/Makefile
deleted file mode 100644
index 4fc69562eae8..000000000000
--- a/arch/nds32/boot/dts/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_OF) += $(addsuffix .dtb.o, $(CONFIG_NDS32_BUILTIN_DTB))
diff --git a/arch/nds32/boot/dts/ae3xx.dts b/arch/nds32/boot/dts/ae3xx.dts
deleted file mode 100644
index 16a9f54a805e..000000000000
--- a/arch/nds32/boot/dts/ae3xx.dts
+++ /dev/null
@@ -1,90 +0,0 @@
-/dts-v1/;
-/ {
-	compatible = "andestech,ae3xx";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&intc>;
-
-	chosen {
-		stdout-path = &serial0;
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x40000000>;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "andestech,n13", "andestech,nds32v3";
-			reg = <0>;
-			clock-frequency = <60000000>;
-			next-level-cache = <&L2>;
-		};
-	};
-
-	intc: interrupt-controller {
-		compatible = "andestech,ativic32";
-		#interrupt-cells = <1>;
-		interrupt-controller;
-	};
-
-	clock: clk {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <30000000>;
-	};
-
-	apb {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		serial0: serial@f0300000 {
-			compatible = "andestech,uart16550", "ns16550a";
-			reg = <0xf0300000 0x1000>;
-			interrupts = <8>;
-			clock-frequency = <14745600>;
-			reg-shift = <2>;
-			reg-offset = <32>;
-			no-loopback-test = <1>;
-		};
-
-		timer0: timer@f0400000 {
-			compatible = "andestech,atcpit100";
-			reg = <0xf0400000 0x1000>;
-			interrupts = <2>;
-			clocks = <&clock>;
-			clock-names = "PCLK";
-		};
-	};
-
-	ahb {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		L2: cache-controller@e0500000 {
-			compatible = "andestech,atl2c";
-			reg = <0xe0500000 0x1000>;
-			cache-unified;
-			cache-level = <2>;
-		};
-
-		mac0: ethernet@e0100000 {
-			compatible = "andestech,atmac100";
-			reg = <0xe0100000 0x1000>;
-			interrupts = <18>;
-		};
-	};
-
-	pmu {
-		compatible = "andestech,nds32v3-pmu";
-		interrupts= <13>;
-	};
-};
diff --git a/arch/nds32/configs/defconfig b/arch/nds32/configs/defconfig
deleted file mode 100644
index f9a89cf00aa6..000000000000
--- a/arch/nds32/configs/defconfig
+++ /dev/null
@@ -1,104 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_USER_NS=y
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_PROFILING=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_CACHE_L2 is not set
-CONFIG_PREEMPT=y
-# CONFIG_COMPACTION is not set
-CONFIG_HZ_100=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_BLK_DEV is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NET_CADENCE is not set
-# CONFIG_NET_VENDOR_BROADCOM is not set
-CONFIG_FTMAC100=y
-# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_NET_VENDOR_MARVELL is not set
-# CONFIG_NET_VENDOR_MICREL is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-# CONFIG_NET_VENDOR_SEEQ is not set
-# CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_WIZNET is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_8250_RUNTIME_UARTS=3
-CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_ITE is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_GENERIC_PHY=y
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXT4_FS_SECURITY=y
-CONFIG_FS_ENCRYPTION=y
-CONFIG_FUSE_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFS_V4_1=y
-CONFIG_NFS_USE_LEGACY_DNS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_INFO_DWARF4=y
-CONFIG_GDB_SCRIPTS=y
-CONFIG_READABLE_ASM=y
-CONFIG_HEADERS_INSTALL=y
-CONFIG_HEADERS_CHECK=y
-CONFIG_DEBUG_SECTION_MISMATCH=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_PANIC_ON_OOPS=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_PREEMPT is not set
-CONFIG_STACKTRACE=y
-CONFIG_RCU_CPU_STALL_TIMEOUT=300
-# CONFIG_CRYPTO_HW is not set
diff --git a/arch/nds32/include/asm/Kbuild b/arch/nds32/include/asm/Kbuild
deleted file mode 100644
index 82a4453c9c2d..000000000000
--- a/arch/nds32/include/asm/Kbuild
+++ /dev/null
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-generic-y += asm-offsets.h
-generic-y += cmpxchg.h
-generic-y += export.h
-generic-y += gpio.h
-generic-y += kvm_para.h
-generic-y += parport.h
-generic-y += user.h
diff --git a/arch/nds32/include/asm/assembler.h b/arch/nds32/include/asm/assembler.h
deleted file mode 100644
index 5e7c56926049..000000000000
--- a/arch/nds32/include/asm/assembler.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#ifndef __NDS32_ASSEMBLER_H__
-#define __NDS32_ASSEMBLER_H__
-
-.macro gie_disable
-	setgie.d
-	dsb
-.endm
-
-.macro gie_enable
-	setgie.e
-	dsb
-.endm
-
-.macro gie_save oldpsw
-	mfsr \oldpsw, $ir0
-	setgie.d
-        dsb
-.endm
-
-.macro gie_restore oldpsw
-	andi \oldpsw, \oldpsw, #0x1
-	beqz \oldpsw, 7001f
-	setgie.e
-	dsb
-7001:
-.endm
-
-
-#define USER(insn,  reg, addr, opr)	\
-9999:	insn  reg, addr, opr;		\
-	.section __ex_table,"a";	\
-	.align 3;			\
-	.long	9999b, 9001f;		\
-	.previous
-
-#endif /* __NDS32_ASSEMBLER_H__ */
diff --git a/arch/nds32/include/asm/barrier.h b/arch/nds32/include/asm/barrier.h
deleted file mode 100644
index 16413172fd50..000000000000
--- a/arch/nds32/include/asm/barrier.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#ifndef __NDS32_ASM_BARRIER_H
-#define __NDS32_ASM_BARRIER_H
-
-#ifndef __ASSEMBLY__
-#define mb()		asm volatile("msync all":::"memory")
-#define rmb()		asm volatile("msync all":::"memory")
-#define wmb()		asm volatile("msync store":::"memory")
-#include <asm-generic/barrier.h>
-
-#endif	/* __ASSEMBLY__ */
-
-#endif	/* __NDS32_ASM_BARRIER_H */
diff --git a/arch/nds32/include/asm/bitfield.h b/arch/nds32/include/asm/bitfield.h
deleted file mode 100644
index b02a58e71f80..000000000000
--- a/arch/nds32/include/asm/bitfield.h
+++ /dev/null
@@ -1,985 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#ifndef __NDS32_BITFIELD_H__
-#define __NDS32_BITFIELD_H__
-/******************************************************************************
- * cr0: CPU_VER (CPU Version Register)
- *****************************************************************************/
-#define CPU_VER_offCFGID	0	/* Minor configuration */
-#define CPU_VER_offREV		16	/* Revision of the CPU version */
-#define CPU_VER_offCPUID	24	/* Major CPU versions */
-
-#define CPU_VER_mskCFGID	( 0xFFFF  << CPU_VER_offCFGID )
-#define CPU_VER_mskREV		( 0xFF  << CPU_VER_offREV )
-#define CPU_VER_mskCPUID	( 0xFF  << CPU_VER_offCPUID )
-
-/******************************************************************************
- * cr1: ICM_CFG (Instruction Cache/Memory Configuration Register)
- *****************************************************************************/
-#define ICM_CFG_offISET		0	/* I-cache sets (# of cache lines) per way */
-#define ICM_CFG_offIWAY		3	/* I-cache ways */
-#define ICM_CFG_offISZ		6	/* I-cache line size */
-#define ICM_CFG_offILCK		9	/* I-cache locking support */
-#define ICM_CFG_offILMB		10	/* On-chip ILM banks */
-#define ICM_CFG_offBSAV		13	/* ILM base register alignment version */
-/* bit 15:31 reserved */
-
-#define ICM_CFG_mskISET		( 0x7  << ICM_CFG_offISET )
-#define ICM_CFG_mskIWAY		( 0x7  << ICM_CFG_offIWAY )
-#define ICM_CFG_mskISZ		( 0x7  << ICM_CFG_offISZ )
-#define ICM_CFG_mskILCK		( 0x1  << ICM_CFG_offILCK )
-#define ICM_CFG_mskILMB		( 0x7  << ICM_CFG_offILMB )
-#define ICM_CFG_mskBSAV		( 0x3  << ICM_CFG_offBSAV )
-
-/******************************************************************************
- * cr2: DCM_CFG (Data Cache/Memory Configuration Register)
- *****************************************************************************/
-#define DCM_CFG_offDSET		0	/* D-cache sets (# of cache lines) per way */
-#define DCM_CFG_offDWAY		3	/* D-cache ways */
-#define DCM_CFG_offDSZ		6	/* D-cache line size */
-#define DCM_CFG_offDLCK		9	/* D-cache locking support */
-#define DCM_CFG_offDLMB		10	/* On-chip DLM banks */
-#define DCM_CFG_offBSAV		13	/* DLM base register alignment version */
-/* bit 15:31 reserved */
-
-#define DCM_CFG_mskDSET		( 0x7  << DCM_CFG_offDSET )
-#define DCM_CFG_mskDWAY		( 0x7  << DCM_CFG_offDWAY )
-#define DCM_CFG_mskDSZ		( 0x7  << DCM_CFG_offDSZ )
-#define DCM_CFG_mskDLCK		( 0x1  << DCM_CFG_offDLCK )
-#define DCM_CFG_mskDLMB		( 0x7  << DCM_CFG_offDLMB )
-#define DCM_CFG_mskBSAV		( 0x3  << DCM_CFG_offBSAV )
-
-/******************************************************************************
- * cr3: MMU_CFG (MMU Configuration Register)
- *****************************************************************************/
-#define MMU_CFG_offMMPS		0	/* Memory management protection scheme */
-#define MMU_CFG_offMMPV		2	/* Memory management protection version number */
-#define MMU_CFG_offFATB		7	/* Fully-associative or non-fully-associative TLB */
-
-#define MMU_CFG_offTBW		8	/* TLB ways(non-associative) TBS */
-#define MMU_CFG_offTBS		11	/* TLB sets per way(non-associative) TBS */
-/* bit 14:14 reserved */
-
-#define MMU_CFG_offEP8MIN4	15	/* 8KB page supported while minimum page is 4KB */
-#define MMU_CFG_offfEPSZ	16	/* Extra page size supported */
-#define MMU_CFG_offTLBLCK	24	/* TLB locking support */
-#define MMU_CFG_offHPTWK	25	/* Hardware Page Table Walker implemented */
-#define MMU_CFG_offDE		26	/* Default endian */
-#define MMU_CFG_offNTPT		27	/* Partitions for non-translated attributes */
-#define MMU_CFG_offIVTB		28	/* Invisible TLB */
-#define MMU_CFG_offVLPT		29	/* VLPT for fast TLB fill handling implemented */
-#define MMU_CFG_offNTME		30	/* Non-translated VA to PA mapping */
-/* bit 31 reserved */
-
-#define MMU_CFG_mskMMPS		( 0x3  << MMU_CFG_offMMPS )
-#define MMU_CFG_mskMMPV		( 0x1F  << MMU_CFG_offMMPV )
-#define MMU_CFG_mskFATB		( 0x1  << MMU_CFG_offFATB )
-#define MMU_CFG_mskTBW		( 0x7  << MMU_CFG_offTBW )
-#define MMU_CFG_mskTBS		( 0x7  << MMU_CFG_offTBS )
-#define MMU_CFG_mskEP8MIN4	( 0x1  << MMU_CFG_offEP8MIN4 )
-#define MMU_CFG_mskfEPSZ	( 0xFF  << MMU_CFG_offfEPSZ )
-#define MMU_CFG_mskTLBLCK	( 0x1  << MMU_CFG_offTLBLCK )
-#define MMU_CFG_mskHPTWK	( 0x1  << MMU_CFG_offHPTWK )
-#define MMU_CFG_mskDE		( 0x1  << MMU_CFG_offDE )
-#define MMU_CFG_mskNTPT		( 0x1  << MMU_CFG_offNTPT )
-#define MMU_CFG_mskIVTB		( 0x1  << MMU_CFG_offIVTB )
-#define MMU_CFG_mskVLPT		( 0x1  << MMU_CFG_offVLPT )
-#define MMU_CFG_mskNTME		( 0x1  << MMU_CFG_offNTME )
-
-/******************************************************************************
- * cr4: MSC_CFG (Misc Configuration Register)
- *****************************************************************************/
-#define MSC_CFG_offEDM		0
-#define MSC_CFG_offLMDMA	1
-#define MSC_CFG_offPFM		2
-#define MSC_CFG_offHSMP		3
-#define MSC_CFG_offTRACE	4
-#define MSC_CFG_offDIV		5
-#define MSC_CFG_offMAC		6
-#define MSC_CFG_offAUDIO	7
-#define MSC_CFG_offL2C		9
-#define MSC_CFG_offRDREG	10
-#define MSC_CFG_offADR24	11
-#define MSC_CFG_offINTLC	12
-#define MSC_CFG_offBASEV	13
-#define MSC_CFG_offNOD		16
-/* bit 13:31 reserved */
-
-#define MSC_CFG_mskEDM		( 0x1  << MSC_CFG_offEDM )
-#define MSC_CFG_mskLMDMA	( 0x1  << MSC_CFG_offLMDMA )
-#define MSC_CFG_mskPFM		( 0x1  << MSC_CFG_offPFM )
-#define MSC_CFG_mskHSMP		( 0x1  << MSC_CFG_offHSMP )
-#define MSC_CFG_mskTRACE	( 0x1  << MSC_CFG_offTRACE )
-#define MSC_CFG_mskDIV		( 0x1  << MSC_CFG_offDIV )
-#define MSC_CFG_mskMAC		( 0x1  << MSC_CFG_offMAC )
-#define MSC_CFG_mskAUDIO	( 0x3  << MSC_CFG_offAUDIO )
-#define MSC_CFG_mskL2C		( 0x1  << MSC_CFG_offL2C )
-#define MSC_CFG_mskRDREG	( 0x1  << MSC_CFG_offRDREG )
-#define MSC_CFG_mskADR24	( 0x1  << MSC_CFG_offADR24 )
-#define MSC_CFG_mskINTLC	( 0x1  << MSC_CFG_offINTLC )
-#define MSC_CFG_mskBASEV	( 0x7  << MSC_CFG_offBASEV )
-#define MSC_CFG_mskNOD		( 0x1  << MSC_CFG_offNOD )
-
-/******************************************************************************
- * cr5: CORE_CFG (Core Identification Register)
- *****************************************************************************/
-#define CORE_ID_offCOREID	0
-/* bit 4:31 reserved */
-
-#define CORE_ID_mskCOREID	( 0xF  << CORE_ID_offCOREID )
-
-/******************************************************************************
- * cr6: FUCOP_EXIST (FPU and Coprocessor Existence Configuration Register)
- *****************************************************************************/
-#define FUCOP_EXIST_offCP0EX	0
-#define FUCOP_EXIST_offCP1EX	1
-#define FUCOP_EXIST_offCP2EX	2
-#define FUCOP_EXIST_offCP3EX	3
-#define FUCOP_EXIST_offCP0ISFPU	31
-
-#define FUCOP_EXIST_mskCP0EX	( 0x1  << FUCOP_EXIST_offCP0EX )
-#define FUCOP_EXIST_mskCP1EX	( 0x1  << FUCOP_EXIST_offCP1EX )
-#define FUCOP_EXIST_mskCP2EX	( 0x1  << FUCOP_EXIST_offCP2EX )
-#define FUCOP_EXIST_mskCP3EX	( 0x1  << FUCOP_EXIST_offCP3EX )
-#define FUCOP_EXIST_mskCP0ISFPU	( 0x1  << FUCOP_EXIST_offCP0ISFPU )
-
-/******************************************************************************
- * ir0: PSW (Processor Status Word Register)
- * ir1: IPSW (Interruption PSW Register)
- * ir2: P_IPSW (Previous IPSW Register)
- *****************************************************************************/
-#define PSW_offGIE		0	/* Global Interrupt Enable */
-#define PSW_offINTL		1	/* Interruption Stack Level */
-#define PSW_offPOM		3	/* Processor Operation Mode, User/Superuser */
-#define PSW_offBE		5	/* Endianness for data memory access, 1:MSB, 0:LSB */
-#define PSW_offIT		6	/* Enable instruction address translation */
-#define PSW_offDT		7	/* Enable data address translation */
-#define PSW_offIME		8	/* Instruction Machine Error flag */
-#define PSW_offDME		9	/* Data Machine Error flag */
-#define PSW_offDEX		10	/* Debug Exception */
-#define PSW_offHSS		11	/* Hardware Single Stepping */
-#define PSW_offDRBE		12	/* Device Register Endian Mode */
-#define PSW_offAEN		13	/* Audio ISA special feature */
-#define PSW_offWBNA		14	/* Write Back Non-Allocate */
-#define PSW_offIFCON		15	/* IFC On */
-#define PSW_offCPL		16	/* Current Priority Level */
-/* bit 19:31 reserved */
-
-#define PSW_mskGIE		( 0x1  << PSW_offGIE )
-#define PSW_mskINTL		( 0x3  << PSW_offINTL )
-#define PSW_mskPOM		( 0x3  << PSW_offPOM )
-#define PSW_mskBE		( 0x1  << PSW_offBE )
-#define PSW_mskIT		( 0x1  << PSW_offIT )
-#define PSW_mskDT		( 0x1  << PSW_offDT )
-#define PSW_mskIME		( 0x1  << PSW_offIME )
-#define PSW_mskDME		( 0x1  << PSW_offDME )
-#define PSW_mskDEX		( 0x1  << PSW_offDEX )
-#define PSW_mskHSS		( 0x1  << PSW_offHSS )
-#define PSW_mskDRBE		( 0x1  << PSW_offDRBE )
-#define PSW_mskAEN		( 0x1  << PSW_offAEN )
-#define PSW_mskWBNA		( 0x1  << PSW_offWBNA )
-#define PSW_mskIFCON		( 0x1  << PSW_offIFCON )
-#define PSW_mskCPL		( 0x7  << PSW_offCPL )
-
-#define PSW_SYSTEM		( 1 << PSW_offPOM )
-#define PSW_INTL_1		( 1 << PSW_offINTL )
-#define PSW_CPL_NO		( 0 << PSW_offCPL )
-#define PSW_CPL_ANY		( 7 << PSW_offCPL )
-
-#define PSW_clr			(PSW_mskGIE|PSW_mskINTL|PSW_mskPOM|PSW_mskIT|PSW_mskDT|PSW_mskIME|PSW_mskWBNA)
-#ifdef __NDS32_EB__
-#ifdef CONFIG_WBNA
-#define PSW_init		(PSW_mskWBNA|(1<<PSW_offINTL)|(1<<PSW_offPOM)|PSW_mskIT|PSW_mskDT|PSW_mskBE)
-#else
-#define PSW_init		((1<<PSW_offINTL)|(1<<PSW_offPOM)|PSW_mskIT|PSW_mskDT|PSW_mskBE)
-#endif
-#else
-#ifdef CONFIG_WBNA
-#define PSW_init		(PSW_mskWBNA|(1<<PSW_offINTL)|(1<<PSW_offPOM)|PSW_mskIT|PSW_mskDT)
-#else
-#define PSW_init		((1<<PSW_offINTL)|(1<<PSW_offPOM)|PSW_mskIT|PSW_mskDT)
-#endif
-#endif
-/******************************************************************************
- * ir3: IVB (Interruption Vector Base Register)
- *****************************************************************************/
-/* bit 0:12 reserved */
-#define IVB_offNIVIC		1	/* Number of input for IVIC Controller */
-#define IVB_offIVIC_VER		11	/* IVIC Version */
-#define IVB_offEVIC		13	/* External Vector Interrupt Controller mode */
-#define IVB_offESZ		14	/* Size of each vector entry */
-#define IVB_offIVBASE		16	/* BasePA of interrupt vector table */
-
-#define IVB_mskNIVIC		( 0x7  << IVB_offNIVIC )
-#define IVB_mskIVIC_VER		( 0x3  << IVB_offIVIC_VER )
-#define IVB_mskEVIC		( 0x1  << IVB_offEVIC )
-#define IVB_mskESZ		( 0x3  << IVB_offESZ )
-#define IVB_mskIVBASE		( 0xFFFF  << IVB_offIVBASE )
-
-#define IVB_valESZ4		0
-#define IVB_valESZ16		1
-#define IVB_valESZ64		2
-#define IVB_valESZ256		3
-/******************************************************************************
- * ir4: EVA (Exception Virtual Address Register)
- * ir5: P_EVA (Previous EVA Register)
- *****************************************************************************/
-
-	/* This register contains the VA that causes the exception */
-
-/******************************************************************************
- * ir6: ITYPE (Interruption Type Register)
- * ir7: P_ITYPE (Previous ITYPE Register)
- *****************************************************************************/
-#define ITYPE_offETYPE		0	/* Exception Type */
-#define ITYPE_offINST		4	/* Exception caused by insn fetch or data access */
-/* bit 5:15 reserved */
-#define ITYPE_offVECTOR		5	/* Vector */
-#define ITYPE_offSWID		16	/* SWID of debugging exception */
-/* bit 31:31 reserved */
-
-#define ITYPE_mskETYPE		( 0xF  << ITYPE_offETYPE )
-#define ITYPE_mskINST		( 0x1  << ITYPE_offINST )
-#define ITYPE_mskVECTOR		( 0x7F  << ITYPE_offVECTOR )
-#define ITYPE_mskSWID		( 0x7FFF  << ITYPE_offSWID )
-
-/* Additional definitions for ITYPE register */
-#define ITYPE_offSTYPE          16	/* Arithmetic Sub Type */
-#define ITYPE_offCPID           20	/* Co-Processor ID which generate the exception */
-
-#define ITYPE_mskSTYPE		( 0xF  << ITYPE_offSTYPE )
-#define ITYPE_mskCPID		( 0x3  << ITYPE_offCPID )
-
-/* Additional definitions of ITYPE register for FPU */
-#define FPU_DISABLE_EXCEPTION	(0x1  << ITYPE_offSTYPE)
-#define FPU_EXCEPTION		(0x2  << ITYPE_offSTYPE)
-#define FPU_CPID		0	/* FPU Co-Processor ID is 0 */
-
-#define NDS32_VECTOR_mskNONEXCEPTION	0x78
-#define NDS32_VECTOR_offEXCEPTION	8
-#define NDS32_VECTOR_offINTERRUPT	9
-
-/* Interrupt vector entry */
-#define ENTRY_RESET_NMI			0
-#define ENTRY_TLB_FILL			1
-#define ENTRY_PTE_NOT_PRESENT		2
-#define ENTRY_TLB_MISC			3
-#define ENTRY_TLB_VLPT_MISS		4
-#define ENTRY_MACHINE_ERROR		5
-#define ENTRY_DEBUG_RELATED		6
-#define ENTRY_GENERAL_EXCPETION		7
-#define ENTRY_SYSCALL			8
-
-/* PTE not present exception definition */
-#define ETYPE_NON_LEAF_PTE_NOT_PRESENT	0
-#define ETYPE_LEAF_PTE_NOT_PRESENT	1
-
-/* General exception ETYPE definition */
-#define ETYPE_ALIGNMENT_CHECK		0
-#define ETYPE_RESERVED_INSTRUCTION	1
-#define ETYPE_TRAP			2
-#define ETYPE_ARITHMETIC		3
-#define ETYPE_PRECISE_BUS_ERROR		4
-#define ETYPE_IMPRECISE_BUS_ERROR	5
-#define ETYPE_COPROCESSOR		6
-#define ETYPE_RESERVED_VALUE		7
-#define ETYPE_NONEXISTENT_MEM_ADDRESS	8
-#define ETYPE_MPZIU_CONTROL		9
-#define ETYPE_NEXT_PRECISE_STACK_OFL	10
-
-/* Kerenl reserves software ID */
-#define SWID_RAISE_INTERRUPT_LEVEL	0x1a	/* SWID_RAISE_INTERRUPT_LEVEL is used to
-						 * raise interrupt level for debug exception
-						 */
-
-/******************************************************************************
- * ir8: MERR (Machine Error Log Register)
- *****************************************************************************/
-/* bit 0:30 reserved */
-#define MERR_offBUSERR		31	/* Bus error caused by a load insn */
-
-#define MERR_mskBUSERR		( 0x1  << MERR_offBUSERR )
-
-/******************************************************************************
- * ir9: IPC (Interruption Program Counter Register)
- * ir10: P_IPC (Previous IPC Register)
- * ir11: OIPC (Overflow Interruption Program Counter Register)
- *****************************************************************************/
-
-	/* This is the shadow stack register of the Program Counter */
-
-/******************************************************************************
- * ir12: P_P0 (Previous P0 Register)
- * ir13: P_P1 (Previous P1 Register)
- *****************************************************************************/
-
-	/* These are shadow registers of $p0 and $p1 */
-
-/******************************************************************************
- * ir14: INT_MASK (Interruption Masking Register)
- *****************************************************************************/
-#define INT_MASK_offH0IM	0	/* Hardware Interrupt 0 Mask bit */
-#define INT_MASK_offH1IM	1	/* Hardware Interrupt 1 Mask bit */
-#define INT_MASK_offH2IM	2	/* Hardware Interrupt 2 Mask bit */
-#define INT_MASK_offH3IM	3	/* Hardware Interrupt 3 Mask bit */
-#define INT_MASK_offH4IM	4	/* Hardware Interrupt 4 Mask bit */
-#define INT_MASK_offH5IM	5	/* Hardware Interrupt 5 Mask bit */
-/* bit 6:15 reserved */
-#define INT_MASK_offSIM		16	/* Software Interrupt Mask bit */
-/* bit 17:29 reserved */
-#define INT_MASK_offIDIVZE	30	/* Enable detection for Divide-By-Zero */
-#define INT_MASK_offDSSIM	31	/* Default Single Stepping Interruption Mask */
-
-#define INT_MASK_mskH0IM	( 0x1  << INT_MASK_offH0IM )
-#define INT_MASK_mskH1IM	( 0x1  << INT_MASK_offH1IM )
-#define INT_MASK_mskH2IM	( 0x1  << INT_MASK_offH2IM )
-#define INT_MASK_mskH3IM	( 0x1  << INT_MASK_offH3IM )
-#define INT_MASK_mskH4IM	( 0x1  << INT_MASK_offH4IM )
-#define INT_MASK_mskH5IM	( 0x1  << INT_MASK_offH5IM )
-#define INT_MASK_mskSIM		( 0x1  << INT_MASK_offSIM )
-#define INT_MASK_mskIDIVZE	( 0x1  << INT_MASK_offIDIVZE )
-#define INT_MASK_mskDSSIM	( 0x1  << INT_MASK_offDSSIM )
-
-#define INT_MASK_INITAIAL_VAL	(INT_MASK_mskDSSIM|INT_MASK_mskIDIVZE)
-
-/******************************************************************************
- * ir15: INT_PEND (Interrupt Pending Register)
- *****************************************************************************/
-#define INT_PEND_offH0I		0	/* Hardware Interrupt 0 pending bit */
-#define INT_PEND_offH1I		1	/* Hardware Interrupt 1 pending bit */
-#define INT_PEND_offH2I		2	/* Hardware Interrupt 2 pending bit */
-#define INT_PEND_offH3I		3	/* Hardware Interrupt 3 pending bit */
-#define INT_PEND_offH4I		4	/* Hardware Interrupt 4 pending bit */
-#define INT_PEND_offH5I		5	/* Hardware Interrupt 5 pending bit */
-
-#define INT_PEND_offCIPL	0	/* Current Interrupt Priority Level */
-
-/* bit 6:15 reserved */
-#define INT_PEND_offSWI		16	/* Software Interrupt pending bit */
-/* bit 17:31 reserved */
-
-#define INT_PEND_mskH0I		( 0x1  << INT_PEND_offH0I )
-#define INT_PEND_mskH1I		( 0x1  << INT_PEND_offH1I )
-#define INT_PEND_mskH2I		( 0x1  << INT_PEND_offH2I )
-#define INT_PEND_mskH3I		( 0x1  << INT_PEND_offH3I )
-#define INT_PEND_mskH4I		( 0x1  << INT_PEND_offH4I )
-#define INT_PEND_mskH5I		( 0x1  << INT_PEND_offH5I )
-#define INT_PEND_mskCIPL	( 0x1  << INT_PEND_offCIPL )
-#define INT_PEND_mskSWI		( 0x1  << INT_PEND_offSWI )
-
-/******************************************************************************
- * mr0: MMU_CTL (MMU Control Register)
- *****************************************************************************/
-#define MMU_CTL_offD		0	/* Default minimum page size */
-#define MMU_CTL_offNTC0		1	/* Non-Translated Cachebility of partition 0 */
-#define MMU_CTL_offNTC1		3	/* Non-Translated Cachebility of partition 1 */
-#define MMU_CTL_offNTC2		5	/* Non-Translated Cachebility of partition 2 */
-#define MMU_CTL_offNTC3		7	/* Non-Translated Cachebility of partition 3 */
-#define MMU_CTL_offTBALCK	9	/* TLB all-lock resolution scheme */
-#define MMU_CTL_offMPZIU	10	/* Multiple Page Size In Use bit */
-#define MMU_CTL_offNTM0		11	/* Non-Translated VA to PA of partition 0 */
-#define MMU_CTL_offNTM1		13	/* Non-Translated VA to PA of partition 1 */
-#define MMU_CTL_offNTM2		15	/* Non-Translated VA to PA of partition 2 */
-#define MMU_CTL_offNTM3		17	/* Non-Translated VA to PA of partition 3 */
-#define MMU_CTL_offUNA		23	/* Unaligned access */
-/* bit 24:31 reserved */
-
-#define MMU_CTL_mskD		( 0x1  << MMU_CTL_offD )
-#define MMU_CTL_mskNTC0		( 0x3  << MMU_CTL_offNTC0 )
-#define MMU_CTL_mskNTC1		( 0x3  << MMU_CTL_offNTC1 )
-#define MMU_CTL_mskNTC2		( 0x3  << MMU_CTL_offNTC2 )
-#define MMU_CTL_mskNTC3		( 0x3  << MMU_CTL_offNTC3 )
-#define MMU_CTL_mskTBALCK	( 0x1  << MMU_CTL_offTBALCK )
-#define MMU_CTL_mskMPZIU	( 0x1  << MMU_CTL_offMPZIU )
-#define MMU_CTL_mskNTM0		( 0x3  << MMU_CTL_offNTM0 )
-#define MMU_CTL_mskNTM1         ( 0x3  << MMU_CTL_offNTM1 )
-#define MMU_CTL_mskNTM2         ( 0x3  << MMU_CTL_offNTM2 )
-#define MMU_CTL_mskNTM3         ( 0x3  << MMU_CTL_offNTM3 )
-
-#define MMU_CTL_D4KB		0
-#define MMU_CTL_D8KB		1
-#define MMU_CTL_UNA		( 0x1  << MMU_CTL_offUNA )
-
-#define MMU_CTL_CACHEABLE_NON   0
-#define MMU_CTL_CACHEABLE_WB	2
-#define MMU_CTL_CACHEABLE_WT	3
-
-/******************************************************************************
- * mr1: L1_PPTB (L1 Physical Page Table Base Register)
- *****************************************************************************/
-#define L1_PPTB_offNV		0	/* Enable Hardware Page Table Walker (HPTWK) */
-/* bit 1:11 reserved */
-#define L1_PPTB_offBASE		12	/* First level physical page table base address */
-
-#define L1_PPTB_mskNV		( 0x1  << L1_PPTB_offNV )
-#define L1_PPTB_mskBASE		( 0xFFFFF  << L1_PPTB_offBASE )
-
-/******************************************************************************
- * mr2: TLB_VPN (TLB Access VPN Register)
- *****************************************************************************/
-/* bit 0:11 reserved */
-#define TLB_VPN_offVPN		12	/* Virtual Page Number */
-
-#define TLB_VPN_mskVPN		( 0xFFFFF  << TLB_VPN_offVPN )
-
-/******************************************************************************
- * mr3: TLB_DATA (TLB Access Data Register)
- *****************************************************************************/
-#define TLB_DATA_offV		0	/* PTE is valid and present */
-#define TLB_DATA_offM		1	/* Page read/write access privilege */
-#define TLB_DATA_offD		4	/* Dirty bit */
-#define TLB_DATA_offX		5	/* Executable bit */
-#define TLB_DATA_offA		6	/* Access bit */
-#define TLB_DATA_offG		7	/* Global page (shared across contexts) */
-#define TLB_DATA_offC		8	/* Cacheability atribute */
-/* bit 11:11 reserved */
-#define TLB_DATA_offPPN		12	/* Phisical Page Number */
-
-#define TLB_DATA_mskV		( 0x1  << TLB_DATA_offV )
-#define TLB_DATA_mskM		( 0x7  << TLB_DATA_offM )
-#define TLB_DATA_mskD		( 0x1  << TLB_DATA_offD )
-#define TLB_DATA_mskX		( 0x1  << TLB_DATA_offX )
-#define TLB_DATA_mskA		( 0x1  << TLB_DATA_offA )
-#define TLB_DATA_mskG		( 0x1  << TLB_DATA_offG )
-#define TLB_DATA_mskC		( 0x7  << TLB_DATA_offC )
-#define TLB_DATA_mskPPN		( 0xFFFFF  << TLB_DATA_offPPN )
-
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-#define TLB_DATA_kernel_text_attr	(TLB_DATA_mskV|TLB_DATA_mskM|TLB_DATA_mskD|TLB_DATA_mskX|TLB_DATA_mskG|TLB_DATA_mskC)
-#else
-#define TLB_DATA_kernel_text_attr	(TLB_DATA_mskV|TLB_DATA_mskM|TLB_DATA_mskD|TLB_DATA_mskX|TLB_DATA_mskG|(0x6 << TLB_DATA_offC))
-#endif
-
-/******************************************************************************
- * mr4: TLB_MISC (TLB Access Misc Register)
- *****************************************************************************/
-#define TLB_MISC_offACC_PSZ	0	/* Page size of a PTE entry */
-#define TLB_MISC_offCID		4	/* Context id */
-/* bit 13:31 reserved */
-
-#define TLB_MISC_mskACC_PSZ    ( 0xF  << TLB_MISC_offACC_PSZ )
-#define TLB_MISC_mskCID        ( 0x1FF  << TLB_MISC_offCID )
-
-/******************************************************************************
- * mr5: VLPT_IDX (Virtual Linear Page Table Index Register)
- *****************************************************************************/
-#define VLPT_IDX_offZERO	0	/* Always 0 */
-#define VLPT_IDX_offEVPN	2	/* Exception Virtual Page Number */
-#define VLPT_IDX_offVLPTB	22	/* Base VA of VLPT */
-
-#define VLPT_IDX_mskZERO	( 0x3  << VLPT_IDX_offZERO )
-#define VLPT_IDX_mskEVPN	( 0xFFFFF  << VLPT_IDX_offEVPN )
-#define VLPT_IDX_mskVLPTB	( 0x3FF  << VLPT_IDX_offVLPTB )
-
-/******************************************************************************
- * mr6: ILMB (Instruction Local Memory Base Register)
- *****************************************************************************/
-#define ILMB_offIEN		0	/* Enable ILM */
-#define ILMB_offILMSZ		1	/* Size of ILM */
-/* bit 5:19 reserved */
-#define ILMB_offIBPA		20	/* Base PA of ILM */
-
-#define ILMB_mskIEN		( 0x1  << ILMB_offIEN )
-#define ILMB_mskILMSZ		( 0xF  << ILMB_offILMSZ )
-#define ILMB_mskIBPA		( 0xFFF  << ILMB_offIBPA )
-
-/******************************************************************************
- * mr7: DLMB (Data Local Memory Base Register)
- *****************************************************************************/
-#define DLMB_offDEN		0	/* Enable DLM */
-#define DLMB_offDLMSZ		1	/* Size of DLM */
-#define DLMB_offDBM		5	/* Enable Double-Buffer Mode for DLM */
-#define DLMB_offDBB		6	/* Double-buffer bank which can be accessed by the processor */
-/* bit 7:19 reserved */
-#define DLMB_offDBPA		20	/* Base PA of DLM */
-
-#define DLMB_mskDEN		( 0x1  << DLMB_offDEN )
-#define DLMB_mskDLMSZ		( 0xF  << DLMB_offDLMSZ )
-#define DLMB_mskDBM		( 0x1  << DLMB_offDBM )
-#define DLMB_mskDBB		( 0x1  << DLMB_offDBB )
-#define DLMB_mskDBPA		( 0xFFF  << DLMB_offDBPA )
-
-/******************************************************************************
- * mr8: CACHE_CTL (Cache Control Register)
- *****************************************************************************/
-#define CACHE_CTL_offIC_EN	0	/* Enable I-cache */
-#define CACHE_CTL_offDC_EN	1	/* Enable D-cache */
-#define CACHE_CTL_offICALCK	2	/* I-cache all-lock resolution scheme */
-#define CACHE_CTL_offDCALCK	3	/* D-cache all-lock resolution scheme */
-#define CACHE_CTL_offDCCWF	4	/* Enable D-cache Critical Word Forwarding */
-#define CACHE_CTL_offDCPMW	5	/* Enable D-cache concurrent miss and write-back processing */
-/* bit 6:31 reserved */
-
-#define CACHE_CTL_mskIC_EN	( 0x1  << CACHE_CTL_offIC_EN )
-#define CACHE_CTL_mskDC_EN	( 0x1  << CACHE_CTL_offDC_EN )
-#define CACHE_CTL_mskICALCK	( 0x1  << CACHE_CTL_offICALCK )
-#define CACHE_CTL_mskDCALCK	( 0x1  << CACHE_CTL_offDCALCK )
-#define CACHE_CTL_mskDCCWF	( 0x1  << CACHE_CTL_offDCCWF )
-#define CACHE_CTL_mskDCPMW	( 0x1  << CACHE_CTL_offDCPMW )
-
-/******************************************************************************
- * mr9: HSMP_SADDR (High Speed Memory Port Starting Address)
- *****************************************************************************/
-#define HSMP_SADDR_offEN	0	/* Enable control bit for the High Speed Memory port */
-/* bit 1:19 reserved */
-
-#define HSMP_SADDR_offRANGE	1	/* Denote the address range (only defined in HSMP v2 ) */
-#define HSMP_SADDR_offSADDR	20	/* Starting base PA of the High Speed Memory Port region */
-
-#define HSMP_SADDR_mskEN	( 0x1  << HSMP_SADDR_offEN )
-#define HSMP_SADDR_mskRANGE	( 0xFFF  << HSMP_SADDR_offRANGE )
-#define HSMP_SADDR_mskSADDR	( 0xFFF  << HSMP_SADDR_offSADDR )
-
-/******************************************************************************
- * mr10: HSMP_EADDR (High Speed Memory Port Ending Address)
- *****************************************************************************/
-/* bit 0:19 reserved */
-#define HSMP_EADDR_offEADDR	20
-
-#define HSMP_EADDR_mskEADDR	( 0xFFF  << HSMP_EADDR_offEADDR )
-
-/******************************************************************************
- * dr0+(n*5): BPCn (n=0-7) (Breakpoint Control Register)
- *****************************************************************************/
-#define BPC_offWP		0	/* Configuration of BPAn */
-#define BPC_offEL		1	/* Enable BPAn */
-#define BPC_offS		2	/* Data address comparison for a store instruction */
-#define BPC_offP		3	/* Compared data address is PA */
-#define BPC_offC		4	/* CID value is compared with the BPCIDn register */
-#define BPC_offBE0		5	/* Enable byte mask for the comparison with register */
-#define BPC_offBE1		6	/* Enable byte mask for the comparison with register */
-#define BPC_offBE2		7	/* Enable byte mask for the comparison with register */
-#define BPC_offBE3		8	/* Enable byte mask for the comparison with register */
-#define BPC_offT		9	/* Enable breakpoint Embedded Tracer triggering operation */
-
-#define BPC_mskWP		( 0x1  << BPC_offWP )
-#define BPC_mskEL		( 0x1  << BPC_offEL )
-#define BPC_mskS		( 0x1  << BPC_offS )
-#define BPC_mskP		( 0x1  << BPC_offP )
-#define BPC_mskC		( 0x1  << BPC_offC )
-#define BPC_mskBE0		( 0x1  << BPC_offBE0 )
-#define BPC_mskBE1		( 0x1  << BPC_offBE1 )
-#define BPC_mskBE2		( 0x1  << BPC_offBE2 )
-#define BPC_mskBE3		( 0x1  << BPC_offBE3 )
-#define BPC_mskT		( 0x1  << BPC_offT )
-
-/******************************************************************************
- * dr1+(n*5): BPAn (n=0-7) (Breakpoint Address Register)
- *****************************************************************************/
-
-	/* These registers contain break point address */
-
-/******************************************************************************
- * dr2+(n*5): BPAMn (n=0-7) (Breakpoint Address Mask Register)
- *****************************************************************************/
-
-	/* These registerd contain the address comparison mask for the BPAn register */
-
-/******************************************************************************
- * dr3+(n*5): BPVn (n=0-7) Breakpoint Data Value Register
- *****************************************************************************/
-
-	/* The BPVn register contains the data value that will be compared with the
-	 * incoming load/store data value */
-
-/******************************************************************************
- * dr4+(n*5): BPCIDn (n=0-7) (Breakpoint Context ID Register)
- *****************************************************************************/
-#define BPCID_offCID		0	/* CID that will be compared with a process's CID */
-/* bit 9:31 reserved */
-
-#define BPCID_mskCID		( 0x1FF  << BPCID_offCID )
-
-/******************************************************************************
- * dr40: EDM_CFG (EDM Configuration Register)
- *****************************************************************************/
-#define EDM_CFG_offBC		0	/* Number of hardware breakpoint sets implemented */
-#define EDM_CFG_offDIMU		3	/* Debug Instruction Memory Unit exists */
-/* bit 4:15 reserved */
-#define EDM_CFG_offVER		16	/* EDM version */
-
-#define EDM_CFG_mskBC		( 0x7  << EDM_CFG_offBC )
-#define EDM_CFG_mskDIMU		( 0x1  << EDM_CFG_offDIMU )
-#define EDM_CFG_mskVER		( 0xFFFF  << EDM_CFG_offVER )
-
-/******************************************************************************
- * dr41: EDMSW (EDM Status Word)
- *****************************************************************************/
-#define EDMSW_offWV		0	/* Write Valid */
-#define EDMSW_offRV		1	/* Read Valid */
-#define EDMSW_offDE		2	/* Debug exception has occurred for this core */
-/* bit 3:31 reserved */
-
-#define EDMSW_mskWV		( 0x1  << EDMSW_offWV )
-#define EDMSW_mskRV		( 0x1  << EDMSW_offRV )
-#define EDMSW_mskDE		( 0x1  << EDMSW_offDE )
-
-/******************************************************************************
- * dr42: EDM_CTL (EDM Control Register)
- *****************************************************************************/
-/* bit 0:30 reserved */
-#define EDM_CTL_offV3_EDM_MODE	6	/* EDM compatibility control bit */
-#define EDM_CTL_offDEH_SEL	31	/* Controls where debug exception is directed to */
-
-#define EDM_CTL_mskV3_EDM_MODE	( 0x1 << EDM_CTL_offV3_EDM_MODE )
-#define EDM_CTL_mskDEH_SEL	( 0x1 << EDM_CTL_offDEH_SEL )
-
-/******************************************************************************
- * dr43: EDM_DTR (EDM Data Transfer Register)
- *****************************************************************************/
-
-	/* This is used to exchange data between the embedded EDM logic
-	 * and the processor core */
-
-/******************************************************************************
- * dr44: BPMTC (Breakpoint Match Trigger Counter Register)
- *****************************************************************************/
-#define BPMTC_offBPMTC		0	/* Breakpoint match trigger counter value */
-/* bit 16:31 reserved */
-
-#define BPMTC_mskBPMTC		( 0xFFFF  << BPMTC_offBPMTC )
-
-/******************************************************************************
- * dr45: DIMBR (Debug Instruction Memory Base Register)
- *****************************************************************************/
-/* bit 0:11 reserved */
-#define DIMBR_offDIMB		12	/* Base address of the Debug Instruction Memory (DIM) */
-#define DIMBR_mskDIMB		( 0xFFFFF  << DIMBR_offDIMB )
-
-/******************************************************************************
- * dr46: TECR0(Trigger Event Control register 0)
- * dr47: TECR1 (Trigger Event Control register 1)
- *****************************************************************************/
-#define TECR_offBP		0	/* Controld which BP is used as a trigger source */
-#define TECR_offNMI		8	/* Use NMI as a trigger source */
-#define TECR_offHWINT		9	/* Corresponding interrupt is used as a trigger source */
-#define TECR_offEVIC		15	/* Enable HWINT as a trigger source in EVIC mode */
-#define TECR_offSYS		16	/* Enable SYSCALL instruction as a trigger source */
-#define TECR_offDBG		17	/* Enable debug exception as a trigger source */
-#define TECR_offMRE		18	/* Enable MMU related exception as a trigger source */
-#define TECR_offE		19	/* An exception is used as a trigger source */
-/* bit 20:30 reserved */
-#define TECR_offL		31	/* Link/Cascade TECR0 trigger event to TECR1 trigger event */
-
-#define TECR_mskBP		( 0xFF  << TECR_offBP )
-#define TECR_mskNMI		( 0x1  << TECR_offBNMI )
-#define TECR_mskHWINT		( 0x3F  << TECR_offBHWINT )
-#define TECR_mskEVIC		( 0x1  << TECR_offBEVIC )
-#define TECR_mskSYS		( 0x1  << TECR_offBSYS )
-#define TECR_mskDBG		( 0x1  << TECR_offBDBG )
-#define TECR_mskMRE		( 0x1  << TECR_offBMRE )
-#define TECR_mskE		( 0x1  << TECR_offE )
-#define TECR_mskL		( 0x1  << TECR_offL )
-
-/******************************************************************************
- * pfr0-2: PFMC0-2 (Performance Counter Register 0-2)
- *****************************************************************************/
-
-	/* These registers contains performance event count */
-
-/******************************************************************************
- * pfr3: PFM_CTL (Performance Counter Control Register)
- *****************************************************************************/
-#define PFM_CTL_offEN0		0	/* Enable PFMC0 */
-#define PFM_CTL_offEN1		1	/* Enable PFMC1 */
-#define PFM_CTL_offEN2		2	/* Enable PFMC2 */
-#define PFM_CTL_offIE0		3	/* Enable interrupt for PFMC0 */
-#define PFM_CTL_offIE1		4	/* Enable interrupt for PFMC1 */
-#define PFM_CTL_offIE2		5	/* Enable interrupt for PFMC2 */
-#define PFM_CTL_offOVF0		6	/* Overflow bit of PFMC0 */
-#define PFM_CTL_offOVF1		7	/* Overflow bit of PFMC1 */
-#define PFM_CTL_offOVF2		8	/* Overflow bit of PFMC2 */
-#define PFM_CTL_offKS0		9	/* Enable superuser mode event counting for PFMC0 */
-#define PFM_CTL_offKS1		10	/* Enable superuser mode event counting for PFMC1 */
-#define PFM_CTL_offKS2		11	/* Enable superuser mode event counting for PFMC2 */
-#define PFM_CTL_offKU0		12	/* Enable user mode event counting for PFMC0 */
-#define PFM_CTL_offKU1		13	/* Enable user mode event counting for PFMC1 */
-#define PFM_CTL_offKU2		14	/* Enable user mode event counting for PFMC2 */
-#define PFM_CTL_offSEL0		15	/* The event selection for PFMC0 */
-#define PFM_CTL_offSEL1		16	/* The event selection for PFMC1 */
-#define PFM_CTL_offSEL2		22	/* The event selection for PFMC2 */
-/* bit 28:31 reserved */
-
-#define PFM_CTL_mskEN0		( 0x01  << PFM_CTL_offEN0 )
-#define PFM_CTL_mskEN1		( 0x01  << PFM_CTL_offEN1 )
-#define PFM_CTL_mskEN2		( 0x01  << PFM_CTL_offEN2 )
-#define PFM_CTL_mskIE0		( 0x01  << PFM_CTL_offIE0 )
-#define PFM_CTL_mskIE1		( 0x01  << PFM_CTL_offIE1 )
-#define PFM_CTL_mskIE2		( 0x01  << PFM_CTL_offIE2 )
-#define PFM_CTL_mskOVF0		( 0x01  << PFM_CTL_offOVF0 )
-#define PFM_CTL_mskOVF1		( 0x01  << PFM_CTL_offOVF1 )
-#define PFM_CTL_mskOVF2		( 0x01  << PFM_CTL_offOVF2 )
-#define PFM_CTL_mskKS0		( 0x01  << PFM_CTL_offKS0 )
-#define PFM_CTL_mskKS1		( 0x01  << PFM_CTL_offKS1 )
-#define PFM_CTL_mskKS2		( 0x01  << PFM_CTL_offKS2 )
-#define PFM_CTL_mskKU0		( 0x01  << PFM_CTL_offKU0 )
-#define PFM_CTL_mskKU1		( 0x01  << PFM_CTL_offKU1 )
-#define PFM_CTL_mskKU2		( 0x01  << PFM_CTL_offKU2 )
-#define PFM_CTL_mskSEL0		( 0x01  << PFM_CTL_offSEL0 )
-#define PFM_CTL_mskSEL1		( 0x3F  << PFM_CTL_offSEL1 )
-#define PFM_CTL_mskSEL2		( 0x3F  << PFM_CTL_offSEL2 )
-
-/******************************************************************************
- * SDZ_CTL (Structure Downsizing Control Register)
- *****************************************************************************/
-#define SDZ_CTL_offICDZ		0	/* I-cache downsizing control */
-#define SDZ_CTL_offDCDZ		3	/* D-cache downsizing control */
-#define SDZ_CTL_offMTBDZ	6	/* MTLB downsizing control */
-#define SDZ_CTL_offBTBDZ	9	/* Branch Target Table downsizing control */
-/* bit 12:31 reserved */
-#define SDZ_CTL_mskICDZ		( 0x07  << SDZ_CTL_offICDZ )
-#define SDZ_CTL_mskDCDZ		( 0x07  << SDZ_CTL_offDCDZ )
-#define SDZ_CTL_mskMTBDZ	( 0x07  << SDZ_CTL_offMTBDZ )
-#define SDZ_CTL_mskBTBDZ	( 0x07  << SDZ_CTL_offBTBDZ )
-
-/******************************************************************************
- * N13MISC_CTL (N13 Miscellaneous Control Register)
- *****************************************************************************/
-#define N13MISC_CTL_offBTB	0	/* Disable Branch Target Buffer */
-#define N13MISC_CTL_offRTP	1	/* Disable Return Target Predictor */
-#define N13MISC_CTL_offPTEPF	2	/* Disable HPTWK L2 PTE pefetch */
-#define N13MISC_CTL_offSP_SHADOW_EN	4	/* Enable shadow stack pointers */
-#define MISC_CTL_offHWPRE      11      /* Enable HardWare PREFETCH */
-/* bit 6, 9:31 reserved */
-
-#define N13MISC_CTL_makBTB	( 0x1  << N13MISC_CTL_offBTB )
-#define N13MISC_CTL_makRTP	( 0x1  << N13MISC_CTL_offRTP )
-#define N13MISC_CTL_makPTEPF	( 0x1  << N13MISC_CTL_offPTEPF )
-#define N13MISC_CTL_makSP_SHADOW_EN	( 0x1  << N13MISC_CTL_offSP_SHADOW_EN )
-#define MISC_CTL_makHWPRE_EN     ( 0x1  << MISC_CTL_offHWPRE )
-
-#ifdef CONFIG_HW_PRE
-#define MISC_init	(N13MISC_CTL_makBTB|N13MISC_CTL_makRTP|N13MISC_CTL_makSP_SHADOW_EN|MISC_CTL_makHWPRE_EN)
-#else
-#define MISC_init	(N13MISC_CTL_makBTB|N13MISC_CTL_makRTP|N13MISC_CTL_makSP_SHADOW_EN)
-#endif
-
-/******************************************************************************
- * PRUSR_ACC_CTL (Privileged Resource User Access Control Registers)
- *****************************************************************************/
-#define PRUSR_ACC_CTL_offDMA_EN	0	/* Allow user mode access of DMA registers */
-#define PRUSR_ACC_CTL_offPFM_EN	1	/* Allow user mode access of PFM registers */
-
-#define PRUSR_ACC_CTL_mskDMA_EN	( 0x1  << PRUSR_ACC_CTL_offDMA_EN )
-#define PRUSR_ACC_CTL_mskPFM_EN	( 0x1  << PRUSR_ACC_CTL_offPFM_EN )
-
-/******************************************************************************
- * dmar0: DMA_CFG (DMA Configuration Register)
- *****************************************************************************/
-#define DMA_CFG_offNCHN		0	/* The number of DMA channels implemented */
-#define DMA_CFG_offUNEA		2	/* Un-aligned External Address transfer feature */
-#define DMA_CFG_off2DET		3	/* 2-D Element Transfer feature */
-/* bit 4:15 reserved */
-#define DMA_CFG_offVER		16	/* DMA architecture and implementation version */
-
-#define DMA_CFG_mskNCHN		( 0x3  << DMA_CFG_offNCHN )
-#define DMA_CFG_mskUNEA		( 0x1  << DMA_CFG_offUNEA )
-#define DMA_CFG_msk2DET		( 0x1  << DMA_CFG_off2DET )
-#define DMA_CFG_mskVER		( 0xFFFF  << DMA_CFG_offVER )
-
-/******************************************************************************
- * dmar1: DMA_GCSW (DMA Global Control and Status Word Register)
- *****************************************************************************/
-#define DMA_GCSW_offC0STAT	0	/* DMA channel 0 state */
-#define DMA_GCSW_offC1STAT	3	/* DMA channel 1 state */
-/* bit 6:11 reserved */
-#define DMA_GCSW_offC0INT	12	/* DMA channel 0 generate interrupt */
-#define DMA_GCSW_offC1INT	13	/* DMA channel 1 generate interrupt */
-/* bit 14:30 reserved */
-#define DMA_GCSW_offEN		31	/* Enable DMA engine */
-
-#define DMA_GCSW_mskC0STAT	( 0x7  << DMA_GCSW_offC0STAT )
-#define DMA_GCSW_mskC1STAT	( 0x7  << DMA_GCSW_offC1STAT )
-#define DMA_GCSW_mskC0INT	( 0x1  << DMA_GCSW_offC0INT )
-#define DMA_GCSW_mskC1INT	( 0x1  << DMA_GCSW_offC1INT )
-#define DMA_GCSW_mskEN		( 0x1  << DMA_GCSW_offEN )
-
-/******************************************************************************
- * dmar2: DMA_CHNSEL (DMA Channel Selection Register)
- *****************************************************************************/
-#define DMA_CHNSEL_offCHAN	0	/* Selected channel number */
-/* bit 2:31 reserved */
-
-#define DMA_CHNSEL_mskCHAN	( 0x3  << DMA_CHNSEL_offCHAN )
-
-/******************************************************************************
- * dmar3: DMA_ACT (DMA Action Register)
- *****************************************************************************/
-#define DMA_ACT_offACMD		0	/* DMA Action Command */
-/* bit 2:31 reserved */
-#define DMA_ACT_mskACMD		( 0x3  << DMA_ACT_offACMD )
-
-/******************************************************************************
- * dmar4: DMA_SETUP (DMA Setup Register)
- *****************************************************************************/
-#define DMA_SETUP_offLM		0	/* Local Memory Selection */
-#define DMA_SETUP_offTDIR	1	/* Transfer Direction */
-#define DMA_SETUP_offTES	2	/* Transfer Element Size */
-#define DMA_SETUP_offESTR	4	/* External memory transfer Stride */
-#define DMA_SETUP_offCIE	16	/* Interrupt Enable on Completion */
-#define DMA_SETUP_offSIE	17	/* Interrupt Enable on explicit Stop */
-#define DMA_SETUP_offEIE	18	/* Interrupt Enable on Error */
-#define DMA_SETUP_offUE		19	/* Enable the Un-aligned External Address */
-#define DMA_SETUP_off2DE	20	/* Enable the 2-D External Transfer */
-#define DMA_SETUP_offCOA	21	/* Transfer Coalescable */
-/* bit 22:31 reserved */
-
-#define DMA_SETUP_mskLM		( 0x1  << DMA_SETUP_offLM )
-#define DMA_SETUP_mskTDIR	( 0x1  << DMA_SETUP_offTDIR )
-#define DMA_SETUP_mskTES	( 0x3  << DMA_SETUP_offTES )
-#define DMA_SETUP_mskESTR	( 0xFFF  << DMA_SETUP_offESTR )
-#define DMA_SETUP_mskCIE	( 0x1  << DMA_SETUP_offCIE )
-#define DMA_SETUP_mskSIE	( 0x1  << DMA_SETUP_offSIE )
-#define DMA_SETUP_mskEIE	( 0x1  << DMA_SETUP_offEIE )
-#define DMA_SETUP_mskUE		( 0x1  << DMA_SETUP_offUE )
-#define DMA_SETUP_msk2DE	( 0x1  << DMA_SETUP_off2DE )
-#define DMA_SETUP_mskCOA	( 0x1  << DMA_SETUP_offCOA )
-
-/******************************************************************************
- * dmar5: DMA_ISADDR (DMA Internal Start Address Register)
- *****************************************************************************/
-#define DMA_ISADDR_offISADDR	0	/* Internal Start Address */
-/* bit 20:31 reserved */
-#define DMA_ISADDR_mskISADDR	( 0xFFFFF  << DMA_ISADDR_offISADDR )
-
-/******************************************************************************
- * dmar6: DMA_ESADDR (DMA External Start Address Register)
- *****************************************************************************/
-/* This register holds External Start Address */
-
-/******************************************************************************
- * dmar7: DMA_TCNT (DMA Transfer Element Count Register)
- *****************************************************************************/
-#define DMA_TCNT_offTCNT	0	/* DMA transfer element count */
-/* bit 18:31 reserved */
-#define DMA_TCNT_mskTCNT	( 0x3FFFF  << DMA_TCNT_offTCNT )
-
-/******************************************************************************
- * dmar8: DMA_STATUS (DMA Status Register)
- *****************************************************************************/
-#define DMA_STATUS_offSTAT	0	/* DMA channel state */
-#define DMA_STATUS_offSTUNA	3	/* Un-aligned error on External Stride value */
-#define DMA_STATUS_offDERR	4	/* DMA Transfer Disruption Error */
-#define DMA_STATUS_offEUNA	5	/* Un-aligned error on the External address */
-#define DMA_STATUS_offIUNA	6	/* Un-aligned error on the Internal address */
-#define DMA_STATUS_offIOOR	7	/* Out-Of-Range error on the Internal address */
-#define DMA_STATUS_offEBUS	8	/* Bus Error on an External DMA transfer */
-#define DMA_STATUS_offESUP	9	/* DMA setup error */
-/* bit 10:31 reserved */
-
-#define DMA_STATUS_mskSTAT	( 0x7  << DMA_STATUS_offSTAT )
-#define DMA_STATUS_mskSTUNA	( 0x1  << DMDMA_STATUS_offSTUNA )
-#define DMA_STATUS_mskDERR	( 0x1  << DMDMA_STATUS_offDERR )
-#define DMA_STATUS_mskEUNA	( 0x1  << DMDMA_STATUS_offEUNA )
-#define DMA_STATUS_mskIUNA	( 0x1  << DMDMA_STATUS_offIUNA )
-#define DMA_STATUS_mskIOOR	( 0x1  << DMDMA_STATUS_offIOOR )
-#define DMA_STATUS_mskEBUS	( 0x1  << DMDMA_STATUS_offEBUS )
-#define DMA_STATUS_mskESUP	( 0x1  << DMDMA_STATUS_offESUP )
-
-/******************************************************************************
- * dmar9: DMA_2DSET (DMA 2D Setup Register)
- *****************************************************************************/
-#define DMA_2DSET_offWECNT	0	/* The Width Element Count for a 2-D region */
-#define DMA_2DSET_offHTSTR	16	/* The Height Stride for a 2-D region */
-
-#define DMA_2DSET_mskHTSTR	( 0xFFFF  << DMA_2DSET_offHTSTR )
-#define DMA_2DSET_mskWECNT	( 0xFFFF  << DMA_2DSET_offWECNT )
-
-/******************************************************************************
- * dmar10: DMA_2DSCTL (DMA 2D Startup Control Register)
- *****************************************************************************/
-#define DMA_2DSCTL_offSTWECNT	0	/* Startup Width Element Count for a 2-D region */
-/* bit 16:31 reserved */
-
-#define DMA_2DSCTL_mskSTWECNT	( 0xFFFF  << DMA_2DSCTL_offSTWECNT )
-
-/******************************************************************************
- * fpcsr: FPCSR (Floating-Point Control Status Register)
- *****************************************************************************/
-#define FPCSR_offRM		0
-#define FPCSR_offIVO		2
-#define FPCSR_offDBZ		3
-#define FPCSR_offOVF		4
-#define FPCSR_offUDF		5
-#define FPCSR_offIEX		6
-#define FPCSR_offIVOE		7
-#define FPCSR_offDBZE		8
-#define FPCSR_offOVFE		9
-#define FPCSR_offUDFE		10
-#define FPCSR_offIEXE		11
-#define FPCSR_offDNZ		12
-#define FPCSR_offIVOT		13
-#define FPCSR_offDBZT		14
-#define FPCSR_offOVFT		15
-#define FPCSR_offUDFT		16
-#define FPCSR_offIEXT		17
-#define FPCSR_offDNIT		18
-#define FPCSR_offRIT		19
-
-#define FPCSR_mskRM             ( 0x3  << FPCSR_offRM )
-#define FPCSR_mskIVO            ( 0x1  << FPCSR_offIVO )
-#define FPCSR_mskDBZ            ( 0x1  << FPCSR_offDBZ )
-#define FPCSR_mskOVF            ( 0x1  << FPCSR_offOVF )
-#define FPCSR_mskUDF            ( 0x1  << FPCSR_offUDF )
-#define FPCSR_mskIEX            ( 0x1  << FPCSR_offIEX )
-#define FPCSR_mskIVOE           ( 0x1  << FPCSR_offIVOE )
-#define FPCSR_mskDBZE           ( 0x1  << FPCSR_offDBZE )
-#define FPCSR_mskOVFE           ( 0x1  << FPCSR_offOVFE )
-#define FPCSR_mskUDFE           ( 0x1  << FPCSR_offUDFE )
-#define FPCSR_mskIEXE           ( 0x1  << FPCSR_offIEXE )
-#define FPCSR_mskDNZ            ( 0x1  << FPCSR_offDNZ )
-#define FPCSR_mskIVOT           ( 0x1  << FPCSR_offIVOT )
-#define FPCSR_mskDBZT           ( 0x1  << FPCSR_offDBZT )
-#define FPCSR_mskOVFT           ( 0x1  << FPCSR_offOVFT )
-#define FPCSR_mskUDFT           ( 0x1  << FPCSR_offUDFT )
-#define FPCSR_mskIEXT           ( 0x1  << FPCSR_offIEXT )
-#define FPCSR_mskDNIT           ( 0x1  << FPCSR_offDNIT )
-#define FPCSR_mskRIT		( 0x1  << FPCSR_offRIT )
-#define FPCSR_mskALL		(FPCSR_mskIVO | FPCSR_mskDBZ | FPCSR_mskOVF | FPCSR_mskUDF | FPCSR_mskIEX)
-#define FPCSR_mskALLE_NO_UDF_IEXE (FPCSR_mskIVOE | FPCSR_mskDBZE | FPCSR_mskOVFE)
-#define FPCSR_mskALLE		(FPCSR_mskIVOE | FPCSR_mskDBZE | FPCSR_mskOVFE | FPCSR_mskUDFE | FPCSR_mskIEXE)
-#define FPCSR_mskALLT           (FPCSR_mskIVOT | FPCSR_mskDBZT | FPCSR_mskOVFT | FPCSR_mskUDFT | FPCSR_mskIEXT |FPCSR_mskDNIT | FPCSR_mskRIT)
-
-/******************************************************************************
- * fpcfg: FPCFG (Floating-Point Configuration Register)
- *****************************************************************************/
-#define	FPCFG_offSP		0
-#define FPCFG_offDP		1
-#define FPCFG_offFREG		2
-#define FPCFG_offFMA		4
-#define FPCFG_offIMVER		22
-#define FPCFG_offAVER		27
-
-#define FPCFG_mskSP		( 0x1  << FPCFG_offSP )
-#define FPCFG_mskDP		( 0x1  << FPCFG_offDP )
-#define FPCFG_mskFREG		( 0x3  << FPCFG_offFREG )
-#define FPCFG_mskFMA		( 0x1  << FPCFG_offFMA )
-#define FPCFG_mskIMVER		( 0x1F  << FPCFG_offIMVER )
-#define FPCFG_mskAVER		( 0x1F  << FPCFG_offAVER )
-
-/* 8 Single precision or 4 double precision registers are available */
-#define SP8_DP4_reg		0
-/* 16 Single precision or 8 double precision registers are available */
-#define SP16_DP8_reg		1
-/* 32 Single precision or 16 double precision registers are available */
-#define SP32_DP16_reg		2
-/* 32 Single precision or 32 double precision registers are available */
-#define SP32_DP32_reg		3
-
-/******************************************************************************
- * fucpr: FUCOP_CTL (FPU and Coprocessor Enable Control Register)
- *****************************************************************************/
-#define FUCOP_CTL_offCP0EN	0
-#define FUCOP_CTL_offCP1EN	1
-#define FUCOP_CTL_offCP2EN	2
-#define FUCOP_CTL_offCP3EN	3
-#define FUCOP_CTL_offAUEN	31
-
-#define FUCOP_CTL_mskCP0EN	( 0x1  << FUCOP_CTL_offCP0EN )
-#define FUCOP_CTL_mskCP1EN	( 0x1  << FUCOP_CTL_offCP1EN )
-#define FUCOP_CTL_mskCP2EN      ( 0x1  << FUCOP_CTL_offCP2EN )
-#define FUCOP_CTL_mskCP3EN      ( 0x1  << FUCOP_CTL_offCP3EN )
-#define FUCOP_CTL_mskAUEN       ( 0x1  << FUCOP_CTL_offAUEN )
-
-#endif /* __NDS32_BITFIELD_H__ */
diff --git a/arch/nds32/include/asm/cache.h b/arch/nds32/include/asm/cache.h
deleted file mode 100644
index fc3c41b59169..000000000000
--- a/arch/nds32/include/asm/cache.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#ifndef __NDS32_CACHE_H__
-#define __NDS32_CACHE_H__
-
-#define L1_CACHE_BYTES	32
-#define L1_CACHE_SHIFT	5
-
-#define ARCH_DMA_MINALIGN   L1_CACHE_BYTES
-
-#endif /* __NDS32_CACHE_H__ */
diff --git a/arch/nds32/include/asm/cache_info.h b/arch/nds32/include/asm/cache_info.h
deleted file mode 100644
index e89d8078f3a6..000000000000
--- a/arch/nds32/include/asm/cache_info.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-struct cache_info {
-	unsigned char ways;
-	unsigned char line_size;
-	unsigned short sets;
-	unsigned short size;
-#if defined(CONFIG_CPU_CACHE_ALIASING)
-	unsigned short aliasing_num;
-	unsigned int aliasing_mask;
-#endif
-};
diff --git a/arch/nds32/include/asm/cacheflush.h b/arch/nds32/include/asm/cacheflush.h
deleted file mode 100644
index c2a222ebfa2a..000000000000
--- a/arch/nds32/include/asm/cacheflush.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#ifndef __NDS32_CACHEFLUSH_H__
-#define __NDS32_CACHEFLUSH_H__
-
-#include <linux/mm.h>
-
-#define PG_dcache_dirty PG_arch_1
-
-void flush_icache_range(unsigned long start, unsigned long end);
-#define flush_icache_range flush_icache_range
-
-void flush_icache_page(struct vm_area_struct *vma, struct page *page);
-#define flush_icache_page flush_icache_page
-
-#ifdef CONFIG_CPU_CACHE_ALIASING
-void flush_cache_mm(struct mm_struct *mm);
-void flush_cache_dup_mm(struct mm_struct *mm);
-void flush_cache_range(struct vm_area_struct *vma,
-		       unsigned long start, unsigned long end);
-void flush_cache_page(struct vm_area_struct *vma,
-		      unsigned long addr, unsigned long pfn);
-void flush_cache_kmaps(void);
-void flush_cache_vmap(unsigned long start, unsigned long end);
-void flush_cache_vunmap(unsigned long start, unsigned long end);
-
-#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
-void flush_dcache_page(struct page *page);
-void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
-		       unsigned long vaddr, void *dst, void *src, int len);
-void copy_from_user_page(struct vm_area_struct *vma, struct page *page,
-			 unsigned long vaddr, void *dst, void *src, int len);
-
-#define ARCH_HAS_FLUSH_ANON_PAGE
-void flush_anon_page(struct vm_area_struct *vma,
-		     struct page *page, unsigned long vaddr);
-
-#define ARCH_IMPLEMENTS_FLUSH_KERNEL_VMAP_RANGE 1
-void flush_kernel_vmap_range(void *addr, int size);
-void invalidate_kernel_vmap_range(void *addr, int size);
-#define flush_dcache_mmap_lock(mapping)   xa_lock_irq(&(mapping)->i_pages)
-#define flush_dcache_mmap_unlock(mapping) xa_unlock_irq(&(mapping)->i_pages)
-
-#else
-void flush_icache_user_page(struct vm_area_struct *vma, struct page *page,
-	                     unsigned long addr, int len);
-#define flush_icache_user_page flush_icache_user_page
-
-#include <asm-generic/cacheflush.h>
-#endif
-
-#endif /* __NDS32_CACHEFLUSH_H__ */
diff --git a/arch/nds32/include/asm/current.h b/arch/nds32/include/asm/current.h
deleted file mode 100644
index 65d30096142b..000000000000
--- a/arch/nds32/include/asm/current.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#ifndef _ASM_NDS32_CURRENT_H
-#define _ASM_NDS32_CURRENT_H
-
-#ifndef __ASSEMBLY__
-register struct task_struct *current asm("$r25");
-#endif /* __ASSEMBLY__ */
-#define tsk $r25
-
-#endif /* _ASM_NDS32_CURRENT_H */
diff --git a/arch/nds32/include/asm/delay.h b/arch/nds32/include/asm/delay.h
deleted file mode 100644
index 56ea3894f8f8..000000000000
--- a/arch/nds32/include/asm/delay.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#ifndef __NDS32_DELAY_H__
-#define __NDS32_DELAY_H__
-
-#include <asm/param.h>
-
-/* There is no clocksource cycle counter in the CPU. */
-static inline void __delay(unsigned long loops)
-{
-	__asm__ __volatile__(".align 2\n"
-			     "1:\n"
-			     "\taddi\t%0, %0, -1\n"
-			     "\tbgtz\t%0, 1b\n"
-			     :"=r"(loops)
-			     :"0"(loops));
-}
-
-static inline void __udelay(unsigned long usecs, unsigned long lpj)
-{
-	usecs *= (unsigned long)(((0x8000000000000000ULL / (500000 / HZ)) +
-				  0x80000000ULL) >> 32);
-	usecs = (unsigned long)(((unsigned long long)usecs * lpj) >> 32);
-	__delay(usecs);
-}
-
-#define udelay(usecs) __udelay((usecs), loops_per_jiffy)
-
-/* make sure "usecs *= ..." in udelay do not overflow. */
-#if HZ >= 1000
-#define MAX_UDELAY_MS	1
-#elif HZ <= 200
-#define MAX_UDELAY_MS	5
-#else
-#define MAX_UDELAY_MS	(1000 / HZ)
-#endif
-
-#endif
diff --git a/arch/nds32/include/asm/elf.h b/arch/nds32/include/asm/elf.h
deleted file mode 100644
index 1853dc89b8ac..000000000000
--- a/arch/nds32/include/asm/elf.h
+++ /dev/null
@@ -1,180 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#ifndef __ASMNDS32_ELF_H
-#define __ASMNDS32_ELF_H
-
-/*
- * ELF register definitions..
- */
-
-#include <asm/ptrace.h>
-#include <asm/fpu.h>
-#include <linux/elf-em.h>
-
-typedef unsigned long elf_greg_t;
-typedef unsigned long elf_freg_t[3];
-
-extern unsigned int elf_hwcap;
-
-#define R_NDS32_NONE			0
-#define R_NDS32_16_RELA			19
-#define R_NDS32_32_RELA			20
-#define R_NDS32_9_PCREL_RELA		22
-#define R_NDS32_15_PCREL_RELA		23
-#define R_NDS32_17_PCREL_RELA		24
-#define R_NDS32_25_PCREL_RELA		25
-#define R_NDS32_HI20_RELA		26
-#define R_NDS32_LO12S3_RELA		27
-#define R_NDS32_LO12S2_RELA		28
-#define R_NDS32_LO12S1_RELA		29
-#define R_NDS32_LO12S0_RELA		30
-#define R_NDS32_SDA15S3_RELA    	31
-#define R_NDS32_SDA15S2_RELA    	32
-#define R_NDS32_SDA15S1_RELA    	33
-#define R_NDS32_SDA15S0_RELA    	34
-#define R_NDS32_GOT20			37
-#define R_NDS32_25_PLTREL		38
-#define R_NDS32_COPY			39
-#define R_NDS32_GLOB_DAT		40
-#define R_NDS32_JMP_SLOT		41
-#define R_NDS32_RELATIVE		42
-#define R_NDS32_GOTOFF			43
-#define R_NDS32_GOTPC20			44
-#define R_NDS32_GOT_HI20		45
-#define R_NDS32_GOT_LO12		46
-#define R_NDS32_GOTPC_HI20		47
-#define R_NDS32_GOTPC_LO12		48
-#define R_NDS32_GOTOFF_HI20		49
-#define R_NDS32_GOTOFF_LO12		50
-#define R_NDS32_INSN16			51
-#define R_NDS32_LABEL			52
-#define R_NDS32_LONGCALL1		53
-#define R_NDS32_LONGCALL2		54
-#define R_NDS32_LONGCALL3		55
-#define R_NDS32_LONGJUMP1		56
-#define R_NDS32_LONGJUMP2		57
-#define R_NDS32_LONGJUMP3		58
-#define R_NDS32_LOADSTORE		59
-#define R_NDS32_9_FIXED_RELA		60
-#define R_NDS32_15_FIXED_RELA		61
-#define R_NDS32_17_FIXED_RELA		62
-#define R_NDS32_25_FIXED_RELA		63
-#define R_NDS32_PLTREL_HI20		64
-#define R_NDS32_PLTREL_LO12		65
-#define R_NDS32_PLT_GOTREL_HI20		66
-#define R_NDS32_PLT_GOTREL_LO12		67
-#define R_NDS32_LO12S0_ORI_RELA		72
-#define R_NDS32_DWARF2_OP1_RELA     	77
-#define R_NDS32_DWARF2_OP2_RELA     	78
-#define R_NDS32_DWARF2_LEB_RELA     	79
-#define R_NDS32_WORD_9_PCREL_RELA	94
-#define R_NDS32_LONGCALL4 		107
-#define R_NDS32_RELA_NOP_MIX		192
-#define R_NDS32_RELA_NOP_MAX		255
-
-#define ELF_NGREG (sizeof (struct user_pt_regs) / sizeof(elf_greg_t))
-#define ELF_CORE_COPY_REGS(dest, regs)	\
-	*(struct user_pt_regs *)&(dest) = (regs)->user_regs;
-
-typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-
-/* Core file format: The core file is written in such a way that gdb
-   can understand it and provide useful information to the user (under
-   linux we use the 'trad-core' bfd).  There are quite a number of
-   obstacles to being able to view the contents of the floating point
-   registers, and until these are solved you will not be able to view the
-   contents of them.  Actually, you can read in the core file and look at
-   the contents of the user struct to find out what the floating point
-   registers contain.
-   The actual file contents are as follows:
-   UPAGE: 1 page consisting of a user struct that tells gdb what is present
-   in the file.  Directly after this is a copy of the task_struct, which
-   is currently not used by gdb, but it may come in useful at some point.
-   All of the registers are stored as part of the upage.  The upage should
-   always be only one page.
-   DATA: The data area is stored.  We use current->end_text to
-   current->brk to pick up all of the user variables, plus any memory
-   that may have been malloced.  No attempt is made to determine if a page
-   is demand-zero or if a page is totally unused, we just cover the entire
-   range.  All of the addresses are rounded in such a way that an integral
-   number of pages is written.
-   STACK: We need the stack information in order to get a meaningful
-   backtrace.  We need to write the data from (esp) to
-   current->start_stack, so we round each of these off in order to be able
-   to write an integer number of pages.
-   The minimum core file size is 3 pages, or 12288 bytes.
-*/
-
-struct user_fp {
-        unsigned long long fd_regs[32];
-        unsigned long fpcsr;
-};
-
-typedef struct user_fp elf_fpregset_t;
-
-struct elf32_hdr;
-#define elf_check_arch(x)		((x)->e_machine == EM_NDS32)
-
-/*
- * These are used to set parameters in the core dumps.
- */
-#define ELF_CLASS	ELFCLASS32
-#ifdef __NDS32_EB__
-#define ELF_DATA	ELFDATA2MSB
-#else
-#define ELF_DATA	ELFDATA2LSB
-#endif
-#define ELF_ARCH	EM_NDS32
-#define ELF_EXEC_PAGESIZE	PAGE_SIZE
-
-/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
-   use of this is to invoke "./ld.so someprog" to test out a new version of
-   the loader.  We need to make sure that it is out of the way of the program
-   that it will "exec", and that there is sufficient room for the brk.  */
-
-#define ELF_ET_DYN_BASE	(2 * TASK_SIZE / 3)
-
-/* When the program starts, a1 contains a pointer to a function to be
-   registered with atexit, as per the SVR4 ABI.  A value of 0 means we
-   have no such handler.  */
-#define ELF_PLAT_INIT(_r, load_addr)	(_r)->uregs[0] = 0
-
-/* This yields a mask that user programs can use to figure out what
-   instruction set this cpu supports. */
-
-#define ELF_HWCAP	(elf_hwcap)
-
-#ifdef __KERNEL__
-
-#define ELF_PLATFORM    (NULL)
-
-/* Old NetWinder binaries were compiled in such a way that the iBCS
-   heuristic always trips on them.  Until these binaries become uncommon
-   enough not to care, don't trust the `ibcs' flag here.  In any case
-   there is no other ELF system currently supported by iBCS.
-   @@ Could print a warning message to encourage users to upgrade.  */
-#define SET_PERSONALITY(ex)	set_personality(PER_LINUX)
-
-#endif
-
-
-#if IS_ENABLED(CONFIG_FPU)
-#define FPU_AUX_ENT	NEW_AUX_ENT(AT_FPUCW, FPCSR_INIT)
-#else
-#define FPU_AUX_ENT	NEW_AUX_ENT(AT_IGNORE, 0)
-#endif
-
-#define ARCH_DLINFO						\
-do {								\
-	/* Optional FPU initialization */			\
-	FPU_AUX_ENT;						\
-								\
-	NEW_AUX_ENT(AT_SYSINFO_EHDR,				\
-		    (elf_addr_t)current->mm->context.vdso);	\
-} while (0)
-#define ARCH_HAS_SETUP_ADDITIONAL_PAGES 1
-struct linux_binprm;
-int arch_setup_additional_pages(struct linux_binprm *, int);
-
-#endif
diff --git a/arch/nds32/include/asm/fixmap.h b/arch/nds32/include/asm/fixmap.h
deleted file mode 100644
index 2fa09a2de428..000000000000
--- a/arch/nds32/include/asm/fixmap.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#ifndef __ASM_NDS32_FIXMAP_H
-#define __ASM_NDS32_FIXMAP_H
-
-#ifdef CONFIG_HIGHMEM
-#include <linux/threads.h>
-#include <asm/kmap_size.h>
-#endif
-
-enum fixed_addresses {
-	FIX_HOLE,
-	FIX_KMAP_RESERVED,
-	FIX_KMAP_BEGIN,
-#ifdef CONFIG_HIGHMEM
-	FIX_KMAP_END = FIX_KMAP_BEGIN + (KM_MAX_IDX * NR_CPUS) - 1,
-#endif
-	FIX_EARLYCON_MEM_BASE,
-	__end_of_fixed_addresses
-};
-#define FIXADDR_TOP             ((unsigned long) (-(16 * PAGE_SIZE)))
-#define FIXADDR_SIZE		((__end_of_fixed_addresses) << PAGE_SHIFT)
-#define FIXADDR_START		(FIXADDR_TOP - FIXADDR_SIZE)
-#define FIXMAP_PAGE_IO		__pgprot(PAGE_DEVICE)
-void __set_fixmap(enum fixed_addresses idx, phys_addr_t phys, pgprot_t prot);
-
-#include <asm-generic/fixmap.h>
-#endif /* __ASM_NDS32_FIXMAP_H */
diff --git a/arch/nds32/include/asm/fpu.h b/arch/nds32/include/asm/fpu.h
deleted file mode 100644
index 8294ed4aaa2c..000000000000
--- a/arch/nds32/include/asm/fpu.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* Copyright (C) 2005-2018 Andes Technology Corporation */
-
-#ifndef __ASM_NDS32_FPU_H
-#define __ASM_NDS32_FPU_H
-
-#if IS_ENABLED(CONFIG_FPU)
-#ifndef __ASSEMBLY__
-#include <linux/sched/task_stack.h>
-#include <linux/preempt.h>
-#include <asm/ptrace.h>
-
-extern bool has_fpu;
-
-extern void save_fpu(struct task_struct *__tsk);
-extern void load_fpu(const struct fpu_struct *fpregs);
-extern bool do_fpu_exception(unsigned int subtype, struct pt_regs *regs);
-extern int do_fpuemu(struct pt_regs *regs, struct fpu_struct *fpu);
-
-#define test_tsk_fpu(regs)	(regs->fucop_ctl & FUCOP_CTL_mskCP0EN)
-
-/*
- * Initially load the FPU with signalling NANS.  This bit pattern
- * has the property that no matter whether considered as single or as
- * double precision, it still represents a signalling NAN.
- */
-
-#define sNAN64    0xFFFFFFFFFFFFFFFFULL
-#define sNAN32    0xFFFFFFFFUL
-
-#if IS_ENABLED(CONFIG_SUPPORT_DENORMAL_ARITHMETIC)
-/*
- * Denormalized number is unsupported by nds32 FPU. Hence the operation
- * is treated as underflow cases when the final result is a denormalized
- * number. To enhance precision, underflow exception trap should be
- * enabled by default and kerenl will re-execute it by fpu emulator
- * when getting underflow exception.
- */
-#define FPCSR_INIT  (FPCSR_mskUDFE | FPCSR_mskIEXE)
-#else
-#define FPCSR_INIT  0x0UL
-#endif
-
-extern const struct fpu_struct init_fpuregs;
-
-static inline void disable_ptreg_fpu(struct pt_regs *regs)
-{
-	regs->fucop_ctl &= ~FUCOP_CTL_mskCP0EN;
-}
-
-static inline void enable_ptreg_fpu(struct pt_regs *regs)
-{
-	regs->fucop_ctl |= FUCOP_CTL_mskCP0EN;
-}
-
-static inline void enable_fpu(void)
-{
-	unsigned long fucop_ctl;
-
-	fucop_ctl = __nds32__mfsr(NDS32_SR_FUCOP_CTL) | FUCOP_CTL_mskCP0EN;
-	__nds32__mtsr(fucop_ctl, NDS32_SR_FUCOP_CTL);
-	__nds32__isb();
-}
-
-static inline void disable_fpu(void)
-{
-	unsigned long fucop_ctl;
-
-	fucop_ctl = __nds32__mfsr(NDS32_SR_FUCOP_CTL) & ~FUCOP_CTL_mskCP0EN;
-	__nds32__mtsr(fucop_ctl, NDS32_SR_FUCOP_CTL);
-	__nds32__isb();
-}
-
-static inline void lose_fpu(void)
-{
-	preempt_disable();
-#if IS_ENABLED(CONFIG_LAZY_FPU)
-	if (last_task_used_math == current) {
-		last_task_used_math = NULL;
-#else
-	if (test_tsk_fpu(task_pt_regs(current))) {
-#endif
-		save_fpu(current);
-	}
-	disable_ptreg_fpu(task_pt_regs(current));
-	preempt_enable();
-}
-
-static inline void own_fpu(void)
-{
-	preempt_disable();
-#if IS_ENABLED(CONFIG_LAZY_FPU)
-	if (last_task_used_math != current) {
-		if (last_task_used_math != NULL)
-			save_fpu(last_task_used_math);
-		load_fpu(&current->thread.fpu);
-		last_task_used_math = current;
-	}
-#else
-	if (!test_tsk_fpu(task_pt_regs(current))) {
-		load_fpu(&current->thread.fpu);
-	}
-#endif
-	enable_ptreg_fpu(task_pt_regs(current));
-	preempt_enable();
-}
-
-#if !IS_ENABLED(CONFIG_LAZY_FPU)
-static inline void unlazy_fpu(struct task_struct *tsk)
-{
-	preempt_disable();
-	if (test_tsk_fpu(task_pt_regs(tsk)))
-		save_fpu(tsk);
-	preempt_enable();
-}
-#endif /* !CONFIG_LAZY_FPU */
-static inline void clear_fpu(struct pt_regs *regs)
-{
-	preempt_disable();
-	if (test_tsk_fpu(regs))
-		disable_ptreg_fpu(regs);
-	preempt_enable();
-}
-#endif /* CONFIG_FPU */
-#endif /* __ASSEMBLY__ */
-#endif /* __ASM_NDS32_FPU_H */
diff --git a/arch/nds32/include/asm/fpuemu.h b/arch/nds32/include/asm/fpuemu.h
deleted file mode 100644
index 63e7ef5f7969..000000000000
--- a/arch/nds32/include/asm/fpuemu.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* Copyright (C) 2005-2018 Andes Technology Corporation */
-
-#ifndef __ARCH_NDS32_FPUEMU_H
-#define __ARCH_NDS32_FPUEMU_H
-
-/*
- * single precision
- */
-
-void fadds(void *ft, void *fa, void *fb);
-void fsubs(void *ft, void *fa, void *fb);
-void fmuls(void *ft, void *fa, void *fb);
-void fdivs(void *ft, void *fa, void *fb);
-void fs2d(void *ft, void *fa);
-void fs2si(void *ft, void *fa);
-void fs2si_z(void *ft, void *fa);
-void fs2ui(void *ft, void *fa);
-void fs2ui_z(void *ft, void *fa);
-void fsi2s(void *ft, void *fa);
-void fui2s(void *ft, void *fa);
-void fsqrts(void *ft, void *fa);
-void fnegs(void *ft, void *fa);
-int fcmps(void *ft, void *fa, void *fb, int cop);
-
-/*
- * double precision
- */
-void faddd(void *ft, void *fa, void *fb);
-void fsubd(void *ft, void *fa, void *fb);
-void fmuld(void *ft, void *fa, void *fb);
-void fdivd(void *ft, void *fa, void *fb);
-void fsqrtd(void *ft, void *fa);
-void fd2s(void *ft, void *fa);
-void fd2si(void *ft, void *fa);
-void fd2si_z(void *ft, void *fa);
-void fd2ui(void *ft, void *fa);
-void fd2ui_z(void *ft, void *fa);
-void fsi2d(void *ft, void *fa);
-void fui2d(void *ft, void *fa);
-void fnegd(void *ft, void *fa);
-int fcmpd(void *ft, void *fa, void *fb, int cop);
-
-#endif /* __ARCH_NDS32_FPUEMU_H */
diff --git a/arch/nds32/include/asm/ftrace.h b/arch/nds32/include/asm/ftrace.h
deleted file mode 100644
index 2f96cc96aa35..000000000000
--- a/arch/nds32/include/asm/ftrace.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-
-#ifndef __ASM_NDS32_FTRACE_H
-#define __ASM_NDS32_FTRACE_H
-
-#ifdef CONFIG_FUNCTION_TRACER
-
-#define HAVE_FUNCTION_GRAPH_FP_TEST
-
-#define MCOUNT_ADDR ((unsigned long)(_mcount))
-/* mcount call is composed of three instructions:
- * sethi + ori + jral
- */
-#define MCOUNT_INSN_SIZE 12
-
-extern void _mcount(unsigned long parent_ip);
-
-#ifdef CONFIG_DYNAMIC_FTRACE
-
-#define FTRACE_ADDR ((unsigned long)_ftrace_caller)
-
-#ifdef __NDS32_EL__
-#define INSN_NOP		0x09000040
-#define INSN_SIZE(insn)		(((insn & 0x00000080) == 0) ? 4 : 2)
-#define IS_SETHI(insn)		((insn & 0x000000fe) == 0x00000046)
-#define ENDIAN_CONVERT(insn)	be32_to_cpu(insn)
-#else /* __NDS32_EB__ */
-#define INSN_NOP		0x40000009
-#define INSN_SIZE(insn)		(((insn & 0x80000000) == 0) ? 4 : 2)
-#define IS_SETHI(insn)		((insn & 0xfe000000) == 0x46000000)
-#define ENDIAN_CONVERT(insn)	(insn)
-#endif
-
-extern void _ftrace_caller(unsigned long parent_ip);
-static inline unsigned long ftrace_call_adjust(unsigned long addr)
-{
-	return addr;
-}
-struct dyn_arch_ftrace {
-};
-
-#endif /* CONFIG_DYNAMIC_FTRACE */
-
-#endif /* CONFIG_FUNCTION_TRACER */
-
-#endif /* __ASM_NDS32_FTRACE_H */
diff --git a/arch/nds32/include/asm/futex.h b/arch/nds32/include/asm/futex.h
deleted file mode 100644
index 4223f473bd36..000000000000
--- a/arch/nds32/include/asm/futex.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#ifndef __NDS32_FUTEX_H__
-#define __NDS32_FUTEX_H__
-
-#include <linux/futex.h>
-#include <linux/uaccess.h>
-#include <asm/errno.h>
-
-#define __futex_atomic_ex_table(err_reg)			\
-	"	.pushsection __ex_table,\"a\"\n"		\
-	"	.align	3\n"					\
-	"	.long	1b, 4f\n"				\
-	"	.long	2b, 4f\n"				\
-	"	.popsection\n"					\
-	"	.pushsection .fixup,\"ax\"\n"			\
-	"4:	move	%0, " err_reg "\n"			\
-	"	b	3b\n"					\
-	"	.popsection"
-
-#define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg)	\
-	smp_mb();						\
-	asm volatile(					\
-	"	movi	$ta, #0\n"				\
-	"1:	llw	%1, [%2+$ta]\n"				\
-	"	" insn "\n"					\
-	"2:	scw	%0, [%2+$ta]\n"				\
-	"	beqz	%0, 1b\n"				\
-	"	movi	%0, #0\n"				\
-	"3:\n"							\
-	__futex_atomic_ex_table("%4")				\
-	: "=&r" (ret), "=&r" (oldval)				\
-	: "r" (uaddr), "r" (oparg), "i" (-EFAULT)		\
-	: "cc", "memory")
-static inline int
-futex_atomic_cmpxchg_inatomic(u32 * uval, u32 __user * uaddr,
-			      u32 oldval, u32 newval)
-{
-	int ret = 0;
-	u32 val, tmp, flags;
-
-	if (!access_ok(uaddr, sizeof(u32)))
-		return -EFAULT;
-
-	smp_mb();
-	asm volatile ("       movi    $ta, #0\n"
-		      "1:     llw     %1, [%6 + $ta]\n"
-		      "       sub     %3, %1, %4\n"
-		      "       cmovz   %2, %5, %3\n"
-		      "       cmovn   %2, %1, %3\n"
-		      "2:     scw     %2, [%6 + $ta]\n"
-		      "       beqz    %2, 1b\n"
-		      "3:\n                   " __futex_atomic_ex_table("%7")
-		      :"+&r"(ret), "=&r"(val), "=&r"(tmp), "=&r"(flags)
-		      :"r"(oldval), "r"(newval), "r"(uaddr), "i"(-EFAULT)
-		      :"$ta", "memory");
-	smp_mb();
-
-	*uval = val;
-	return ret;
-}
-
-static inline int
-arch_futex_atomic_op_inuser(int op, int oparg, int *oval, u32 __user *uaddr)
-{
-	int oldval = 0, ret;
-
-	if (!access_ok(uaddr, sizeof(u32)))
-		return -EFAULT;
-	switch (op) {
-	case FUTEX_OP_SET:
-		__futex_atomic_op("move	%0, %3", ret, oldval, tmp, uaddr,
-				  oparg);
-		break;
-	case FUTEX_OP_ADD:
-		__futex_atomic_op("add	%0, %1, %3", ret, oldval, tmp, uaddr,
-				  oparg);
-		break;
-	case FUTEX_OP_OR:
-		__futex_atomic_op("or	%0, %1, %3", ret, oldval, tmp, uaddr,
-				  oparg);
-		break;
-	case FUTEX_OP_ANDN:
-		__futex_atomic_op("and	%0, %1, %3", ret, oldval, tmp, uaddr,
-				  ~oparg);
-		break;
-	case FUTEX_OP_XOR:
-		__futex_atomic_op("xor	%0, %1, %3", ret, oldval, tmp, uaddr,
-				  oparg);
-		break;
-	default:
-		ret = -ENOSYS;
-	}
-
-	if (!ret)
-		*oval = oldval;
-
-	return ret;
-}
-#endif /* __NDS32_FUTEX_H__ */
diff --git a/arch/nds32/include/asm/highmem.h b/arch/nds32/include/asm/highmem.h
deleted file mode 100644
index 16159a8716f2..000000000000
--- a/arch/nds32/include/asm/highmem.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#ifndef _ASM_HIGHMEM_H
-#define _ASM_HIGHMEM_H
-
-#include <asm/proc-fns.h>
-#include <asm/fixmap.h>
-
-/*
- * Right now we initialize only a single pte table. It can be extended
- * easily, subsequent pte tables have to be allocated in one physical
- * chunk of RAM.
- */
-/*
- * Ordering is (from lower to higher memory addresses):
- *
- * high_memory
- *			Persistent kmap area
- * PKMAP_BASE
- *			fixed_addresses
- * FIXADDR_START
- * FIXADDR_TOP
- *			Vmalloc area
- * VMALLOC_START
- * VMALLOC_END
- */
-#define PKMAP_BASE		((FIXADDR_START - PGDIR_SIZE) & (PGDIR_MASK))
-#define LAST_PKMAP		PTRS_PER_PTE
-#define LAST_PKMAP_MASK		(LAST_PKMAP - 1)
-#define PKMAP_NR(virt)		(((virt) - (PKMAP_BASE)) >> PAGE_SHIFT)
-#define PKMAP_ADDR(nr)		(PKMAP_BASE + ((nr) << PAGE_SHIFT))
-
-static inline void flush_cache_kmaps(void)
-{
-	cpu_dcache_wbinval_all();
-}
-
-/* declarations for highmem.c */
-extern unsigned long highstart_pfn, highend_pfn;
-
-extern pte_t *pkmap_page_table;
-
-extern void kmap_init(void);
-
-/*
- * FIXME: The below looks broken vs. a kmap_atomic() in task context which
- * is interupted and another kmap_atomic() happens in interrupt context.
- * But what do I know about nds32. -- tglx
- */
-#define arch_kmap_local_post_map(vaddr, pteval)			\
-	do {							\
-		__nds32__tlbop_inv(vaddr);			\
-		__nds32__mtsr_dsb(vaddr, NDS32_SR_TLB_VPN);	\
-		__nds32__tlbop_rwr(pteval);			\
-		__nds32__isb();					\
-	} while (0)
-
-#define arch_kmap_local_pre_unmap(vaddr)			\
-	do {							\
-		__nds32__tlbop_inv(vaddr);			\
-		__nds32__isb();					\
-	} while (0)
-
-#endif
diff --git a/arch/nds32/include/asm/io.h b/arch/nds32/include/asm/io.h
deleted file mode 100644
index e57378d04006..000000000000
--- a/arch/nds32/include/asm/io.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#ifndef __ASM_NDS32_IO_H
-#define __ASM_NDS32_IO_H
-
-#include <linux/types.h>
-
-#define __raw_writeb __raw_writeb
-static inline void __raw_writeb(u8 val, volatile void __iomem *addr)
-{
-	asm volatile("sbi %0, [%1]" : : "r" (val), "r" (addr));
-}
-
-#define __raw_writew __raw_writew
-static inline void __raw_writew(u16 val, volatile void __iomem *addr)
-{
-	asm volatile("shi %0, [%1]" : : "r" (val), "r" (addr));
-}
-
-#define __raw_writel __raw_writel
-static inline void __raw_writel(u32 val, volatile void __iomem *addr)
-{
-	asm volatile("swi %0, [%1]" : : "r" (val), "r" (addr));
-}
-
-#define __raw_readb __raw_readb
-static inline u8 __raw_readb(const volatile void __iomem *addr)
-{
-	u8 val;
-
-	asm volatile("lbi %0, [%1]" : "=r" (val) : "r" (addr));
-	return val;
-}
-
-#define __raw_readw __raw_readw
-static inline u16 __raw_readw(const volatile void __iomem *addr)
-{
-	u16 val;
-
-	asm volatile("lhi %0, [%1]" : "=r" (val) : "r" (addr));
-	return val;
-}
-
-#define __raw_readl __raw_readl
-static inline u32 __raw_readl(const volatile void __iomem *addr)
-{
-	u32 val;
-
-	asm volatile("lwi %0, [%1]" : "=r" (val) : "r" (addr));
-	return val;
-}
-
-#define __iormb()               rmb()
-#define __iowmb()               wmb()
-
-/*
- * {read,write}{b,w,l,q}_relaxed() are like the regular version, but
- * are not guaranteed to provide ordering against spinlocks or memory
- * accesses.
- */
-
-#define readb_relaxed(c)	({ u8  __v = __raw_readb(c); __v; })
-#define readw_relaxed(c)	({ u16 __v = le16_to_cpu((__force __le16)__raw_readw(c)); __v; })
-#define readl_relaxed(c)	({ u32 __v = le32_to_cpu((__force __le32)__raw_readl(c)); __v; })
-#define writeb_relaxed(v,c)	((void)__raw_writeb((v),(c)))
-#define writew_relaxed(v,c)	((void)__raw_writew((__force u16)cpu_to_le16(v),(c)))
-#define writel_relaxed(v,c)	((void)__raw_writel((__force u32)cpu_to_le32(v),(c)))
-
-/*
- * {read,write}{b,w,l,q}() access little endian memory and return result in
- * native endianness.
- */
-#define readb(c)	({ u8  __v = readb_relaxed(c); __iormb(); __v; })
-#define readw(c)	({ u16 __v = readw_relaxed(c); __iormb(); __v; })
-#define readl(c)	({ u32 __v = readl_relaxed(c); __iormb(); __v; })
-
-#define writeb(v,c)	({ __iowmb(); writeb_relaxed((v),(c)); })
-#define writew(v,c)	({ __iowmb(); writew_relaxed((v),(c)); })
-#define writel(v,c)	({ __iowmb(); writel_relaxed((v),(c)); })
-
-#include <asm-generic/io.h>
-
-#endif /* __ASM_NDS32_IO_H */
diff --git a/arch/nds32/include/asm/irqflags.h b/arch/nds32/include/asm/irqflags.h
deleted file mode 100644
index 51ef800bb301..000000000000
--- a/arch/nds32/include/asm/irqflags.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#include <asm/nds32.h>
-#include <nds32_intrinsic.h>
-
-#define arch_local_irq_disable()	\
-	GIE_DISABLE();
-
-#define arch_local_irq_enable()	\
-	GIE_ENABLE();
-static inline unsigned long arch_local_irq_save(void)
-{
-	unsigned long flags;
-	flags = __nds32__mfsr(NDS32_SR_PSW) & PSW_mskGIE;
-	GIE_DISABLE();
-	return flags;
-}
-
-static inline unsigned long arch_local_save_flags(void)
-{
-	unsigned long flags;
-	flags = __nds32__mfsr(NDS32_SR_PSW) & PSW_mskGIE;
-	return flags;
-}
-
-static inline void arch_local_irq_restore(unsigned long flags)
-{
-	if(flags)
-		GIE_ENABLE();
-}
-
-static inline int arch_irqs_disabled_flags(unsigned long flags)
-{
-	return !flags;
-}
-
-static inline int arch_irqs_disabled(void)
-{
-	return arch_irqs_disabled_flags(arch_local_save_flags());
-}
diff --git a/arch/nds32/include/asm/l2_cache.h b/arch/nds32/include/asm/l2_cache.h
deleted file mode 100644
index 3ea48e19e6de..000000000000
--- a/arch/nds32/include/asm/l2_cache.h
+++ /dev/null
@@ -1,137 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#ifndef L2_CACHE_H
-#define L2_CACHE_H
-
-/* CCTL_CMD_OP */
-#define L2_CA_CONF_OFF		0x0
-#define L2_IF_CONF_OFF		0x4
-#define L2CC_SETUP_OFF		0x8
-#define L2CC_PROT_OFF		0xC
-#define L2CC_CTRL_OFF		0x10
-#define L2_INT_EN_OFF           0x20
-#define L2_STA_OFF              0x24
-#define RDERR_ADDR_OFF		0x28
-#define WRERR_ADDR_OFF		0x2c
-#define EVDPTERR_ADDR_OFF	0x30
-#define IMPL3ERR_ADDR_OFF	0x34
-#define L2_CNT0_CTRL_OFF        0x40
-#define L2_EVNT_CNT0_OFF        0x44
-#define L2_CNT1_CTRL_OFF        0x48
-#define L2_EVNT_CNT1_OFF        0x4c
-#define L2_CCTL_CMD_OFF		0x60
-#define L2_CCTL_STATUS_OFF	0x64
-#define L2_LINE_TAG_OFF		0x68
-#define L2_LINE_DPT_OFF		0x70
-
-#define CCTL_CMD_L2_IX_INVAL    0x0
-#define CCTL_CMD_L2_PA_INVAL    0x1
-#define CCTL_CMD_L2_IX_WB       0x2
-#define CCTL_CMD_L2_PA_WB       0x3
-#define CCTL_CMD_L2_PA_WBINVAL  0x5
-#define CCTL_CMD_L2_SYNC        0xa
-
-/* CCTL_CMD_TYPE */
-#define CCTL_SINGLE_CMD         0
-#define CCTL_BLOCK_CMD          0x10
-#define CCTL_ALL_CMD		0x10
-
-/******************************************************************************
- * L2_CA_CONF (Cache architecture configuration)
- *****************************************************************************/
-#define L2_CA_CONF_offL2SET		0
-#define L2_CA_CONF_offL2WAY		4
-#define L2_CA_CONF_offL2CLSZ            8
-#define L2_CA_CONF_offL2DW		11
-#define L2_CA_CONF_offL2PT		14
-#define L2_CA_CONF_offL2VER		16
-
-#define L2_CA_CONF_mskL2SET	(0xFUL << L2_CA_CONF_offL2SET)
-#define L2_CA_CONF_mskL2WAY	(0xFUL << L2_CA_CONF_offL2WAY)
-#define L2_CA_CONF_mskL2CLSZ    (0x7UL << L2_CA_CONF_offL2CLSZ)
-#define L2_CA_CONF_mskL2DW	(0x7UL << L2_CA_CONF_offL2DW)
-#define L2_CA_CONF_mskL2PT	(0x3UL << L2_CA_CONF_offL2PT)
-#define L2_CA_CONF_mskL2VER	(0xFFFFUL << L2_CA_CONF_offL2VER)
-
-/******************************************************************************
- * L2CC_SETUP (L2CC Setup register)
- *****************************************************************************/
-#define L2CC_SETUP_offPART              0
-#define L2CC_SETUP_mskPART              (0x3UL << L2CC_SETUP_offPART)
-#define L2CC_SETUP_offDDLATC            4
-#define L2CC_SETUP_mskDDLATC            (0x3UL << L2CC_SETUP_offDDLATC)
-#define L2CC_SETUP_offTDLATC            8
-#define L2CC_SETUP_mskTDLATC            (0x3UL << L2CC_SETUP_offTDLATC)
-
-/******************************************************************************
- * L2CC_PROT (L2CC Protect register)
- *****************************************************************************/
-#define L2CC_PROT_offMRWEN              31
-#define L2CC_PROT_mskMRWEN      (0x1UL << L2CC_PROT_offMRWEN)
-
-/******************************************************************************
- * L2_CCTL_STATUS_Mn (The L2CCTL command working status for Master n)
- *****************************************************************************/
-#define L2CC_CTRL_offEN                 31
-#define L2CC_CTRL_mskEN                 (0x1UL << L2CC_CTRL_offEN)
-
-/******************************************************************************
- * L2_CCTL_STATUS_Mn (The L2CCTL command working status for Master n)
- *****************************************************************************/
-#define L2_CCTL_STATUS_offCMD_COMP      31
-#define L2_CCTL_STATUS_mskCMD_COMP      (0x1 << L2_CCTL_STATUS_offCMD_COMP)
-
-extern void __iomem *atl2c_base;
-#include <linux/smp.h>
-#include <asm/io.h>
-#include <asm/bitfield.h>
-
-#define L2C_R_REG(offset)               readl(atl2c_base + offset)
-#define L2C_W_REG(offset, value)        writel(value, atl2c_base + offset)
-
-#define L2_CMD_RDY()    \
-        do{;}while((L2C_R_REG(L2_CCTL_STATUS_OFF) & L2_CCTL_STATUS_mskCMD_COMP) == 0)
-
-static inline unsigned long L2_CACHE_SET(void)
-{
-	return 64 << ((L2C_R_REG(L2_CA_CONF_OFF) & L2_CA_CONF_mskL2SET) >>
-		      L2_CA_CONF_offL2SET);
-}
-
-static inline unsigned long L2_CACHE_WAY(void)
-{
-	return 1 +
-	    ((L2C_R_REG(L2_CA_CONF_OFF) & L2_CA_CONF_mskL2WAY) >>
-	     L2_CA_CONF_offL2WAY);
-}
-
-static inline unsigned long L2_CACHE_LINE_SIZE(void)
-{
-
-	return 4 << ((L2C_R_REG(L2_CA_CONF_OFF) & L2_CA_CONF_mskL2CLSZ) >>
-		     L2_CA_CONF_offL2CLSZ);
-}
-
-static inline unsigned long GET_L2CC_CTRL_CPU(unsigned long cpu)
-{
-	if (cpu == smp_processor_id())
-		return L2C_R_REG(L2CC_CTRL_OFF);
-	return L2C_R_REG(L2CC_CTRL_OFF + (cpu << 8));
-}
-
-static inline void SET_L2CC_CTRL_CPU(unsigned long cpu, unsigned long val)
-{
-	if (cpu == smp_processor_id())
-		L2C_W_REG(L2CC_CTRL_OFF, val);
-	else
-		L2C_W_REG(L2CC_CTRL_OFF + (cpu << 8), val);
-}
-
-static inline unsigned long GET_L2CC_STATUS_CPU(unsigned long cpu)
-{
-	if (cpu == smp_processor_id())
-		return L2C_R_REG(L2_CCTL_STATUS_OFF);
-	return L2C_R_REG(L2_CCTL_STATUS_OFF + (cpu << 8));
-}
-#endif
diff --git a/arch/nds32/include/asm/linkage.h b/arch/nds32/include/asm/linkage.h
deleted file mode 100644
index a696469abb70..000000000000
--- a/arch/nds32/include/asm/linkage.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#ifndef __ASM_LINKAGE_H
-#define __ASM_LINKAGE_H
-
-/* This file is required by include/linux/linkage.h */
-#define __ALIGN .align 2
-#define __ALIGN_STR ".align 2"
-
-#endif
diff --git a/arch/nds32/include/asm/memory.h b/arch/nds32/include/asm/memory.h
deleted file mode 100644
index 62faafbc28e4..000000000000
--- a/arch/nds32/include/asm/memory.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#ifndef __ASM_NDS32_MEMORY_H
-#define __ASM_NDS32_MEMORY_H
-
-#include <linux/compiler.h>
-#include <linux/sizes.h>
-
-#ifndef __ASSEMBLY__
-#include <asm/page.h>
-#endif
-
-#ifndef PHYS_OFFSET
-#define PHYS_OFFSET     (0x0)
-#endif
-
-/*
- * TASK_SIZE - the maximum size of a user space task.
- * TASK_UNMAPPED_BASE - the lower boundary of the mmap VM area
- */
-#define TASK_SIZE		((CONFIG_PAGE_OFFSET) - (SZ_32M))
-#define TASK_UNMAPPED_BASE	ALIGN(TASK_SIZE / 3, SZ_32M)
-#define PAGE_OFFSET		(CONFIG_PAGE_OFFSET)
-
-/*
- * Physical vs virtual RAM address space conversion.  These are
- * private definitions which should NOT be used outside memory.h
- * files.  Use virt_to_phys/phys_to_virt/__pa/__va instead.
- */
-#ifndef __virt_to_phys
-#define __virt_to_phys(x)	((x) - PAGE_OFFSET + PHYS_OFFSET)
-#define __phys_to_virt(x)	((x) - PHYS_OFFSET + PAGE_OFFSET)
-#endif
-
-/*
- * The module space lives between the addresses given by TASK_SIZE
- * and PAGE_OFFSET - it must be within 32MB of the kernel text.
- */
-#define MODULES_END	(PAGE_OFFSET)
-#define MODULES_VADDR	(MODULES_END - SZ_32M)
-
-#if TASK_SIZE > MODULES_VADDR
-#error Top of user space clashes with start of module space
-#endif
-
-#ifndef __ASSEMBLY__
-
-/*
- * PFNs are used to describe any physical page; this means
- * PFN 0 == physical address 0.
- *
- * This is the PFN of the first RAM page in the kernel
- * direct-mapped view.  We assume this is the first page
- * of RAM in the mem_map as well.
- */
-#define PHYS_PFN_OFFSET	(PHYS_OFFSET >> PAGE_SHIFT)
-
-/*
- * Drivers should NOT use these either.
- */
-#define __pa(x)			__virt_to_phys((unsigned long)(x))
-#define __va(x)			((void *)__phys_to_virt((unsigned long)(x)))
-
-/*
- * Conversion between a struct page and a physical address.
- *
- * Note: when converting an unknown physical address to a
- * struct page, the resulting pointer must be validated
- * using VALID_PAGE().  It must return an invalid struct page
- * for any physical address not corresponding to a system
- * RAM address.
- *
- *  pfn_valid(pfn)	indicates whether a PFN number is valid
- *
- *  virt_to_page(k)	convert a _valid_ virtual address to struct page *
- *  virt_addr_valid(k)	indicates whether a virtual address is valid
- */
-#define ARCH_PFN_OFFSET		PHYS_PFN_OFFSET
-#define pfn_valid(pfn)		((pfn) >= PHYS_PFN_OFFSET && (pfn) < (PHYS_PFN_OFFSET + max_mapnr))
-
-#define virt_to_page(kaddr)	(pfn_to_page(__pa(kaddr) >> PAGE_SHIFT))
-#define virt_addr_valid(kaddr)	((unsigned long)(kaddr) >= PAGE_OFFSET && (unsigned long)(kaddr) < (unsigned long)high_memory)
-
-#define page_to_phys(page)	(page_to_pfn(page) << PAGE_SHIFT)
-
-#endif
-
-#include <asm-generic/memory_model.h>
-
-#endif
diff --git a/arch/nds32/include/asm/mmu.h b/arch/nds32/include/asm/mmu.h
deleted file mode 100644
index 89d63afee455..000000000000
--- a/arch/nds32/include/asm/mmu.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#ifndef __NDS32_MMU_H
-#define __NDS32_MMU_H
-
-typedef struct {
-	unsigned int id;
-	void *vdso;
-} mm_context_t;
-
-#endif
diff --git a/arch/nds32/include/asm/mmu_context.h b/arch/nds32/include/asm/mmu_context.h
deleted file mode 100644
index c651bc8cacdc..000000000000
--- a/arch/nds32/include/asm/mmu_context.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#ifndef __ASM_NDS32_MMU_CONTEXT_H
-#define __ASM_NDS32_MMU_CONTEXT_H
-
-#include <linux/spinlock.h>
-#include <asm/tlbflush.h>
-#include <asm/proc-fns.h>
-#include <asm-generic/mm_hooks.h>
-
-#define init_new_context init_new_context
-static inline int
-init_new_context(struct task_struct *tsk, struct mm_struct *mm)
-{
-	mm->context.id = 0;
-	return 0;
-}
-
-#define CID_BITS	9
-extern spinlock_t cid_lock;
-extern unsigned int cpu_last_cid;
-
-static inline void __new_context(struct mm_struct *mm)
-{
-	unsigned int cid;
-	unsigned long flags;
-
-	spin_lock_irqsave(&cid_lock, flags);
-	cid = cpu_last_cid;
-	cpu_last_cid += 1 << TLB_MISC_offCID;
-	if (cpu_last_cid == 0)
-		cpu_last_cid = 1 << TLB_MISC_offCID << CID_BITS;
-
-	if ((cid & TLB_MISC_mskCID) == 0)
-		flush_tlb_all();
-	spin_unlock_irqrestore(&cid_lock, flags);
-
-	mm->context.id = cid;
-}
-
-static inline void check_context(struct mm_struct *mm)
-{
-	if (unlikely
-	    ((mm->context.id ^ cpu_last_cid) >> TLB_MISC_offCID >> CID_BITS))
-		__new_context(mm);
-}
-
-static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
-			     struct task_struct *tsk)
-{
-	unsigned int cpu = smp_processor_id();
-
-	if (!cpumask_test_and_set_cpu(cpu, mm_cpumask(next)) || prev != next) {
-		check_context(next);
-		cpu_switch_mm(next);
-	}
-}
-
-#include <asm-generic/mmu_context.h>
-
-#endif
diff --git a/arch/nds32/include/asm/nds32.h b/arch/nds32/include/asm/nds32.h
deleted file mode 100644
index 4994f6a9e0a0..000000000000
--- a/arch/nds32/include/asm/nds32.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#ifndef _ASM_NDS32_NDS32_H_
-#define _ASM_NDS32_NDS32_H_
-
-#include <asm/bitfield.h>
-#include <asm/cachectl.h>
-
-#ifndef __ASSEMBLY__
-#include <linux/init.h>
-#include <asm/barrier.h>
-#include <nds32_intrinsic.h>
-
-#ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
-#define FP_OFFSET (-3)
-#else
-#define FP_OFFSET (-2)
-#endif
-#define LP_OFFSET (-1)
-
-extern void __init early_trap_init(void);
-static inline void GIE_ENABLE(void)
-{
-	mb();
-	__nds32__gie_en();
-}
-
-static inline void GIE_DISABLE(void)
-{
-	mb();
-	__nds32__gie_dis();
-}
-
-static inline unsigned long CACHE_SET(unsigned char cache)
-{
-
-	if (cache == ICACHE)
-		return 64 << ((__nds32__mfsr(NDS32_SR_ICM_CFG) & ICM_CFG_mskISET) >>
-			      ICM_CFG_offISET);
-	else
-		return 64 << ((__nds32__mfsr(NDS32_SR_DCM_CFG) & DCM_CFG_mskDSET) >>
-			      DCM_CFG_offDSET);
-}
-
-static inline unsigned long CACHE_WAY(unsigned char cache)
-{
-
-	if (cache == ICACHE)
-		return 1 +
-		    ((__nds32__mfsr(NDS32_SR_ICM_CFG) & ICM_CFG_mskIWAY) >> ICM_CFG_offIWAY);
-	else
-		return 1 +
-		    ((__nds32__mfsr(NDS32_SR_DCM_CFG) & DCM_CFG_mskDWAY) >> DCM_CFG_offDWAY);
-}
-
-static inline unsigned long CACHE_LINE_SIZE(unsigned char cache)
-{
-
-	if (cache == ICACHE)
-		return 8 <<
-		    (((__nds32__mfsr(NDS32_SR_ICM_CFG) & ICM_CFG_mskISZ) >> ICM_CFG_offISZ) - 1);
-	else
-		return 8 <<
-		    (((__nds32__mfsr(NDS32_SR_DCM_CFG) & DCM_CFG_mskDSZ) >> DCM_CFG_offDSZ) - 1);
-}
-
-#endif /* __ASSEMBLY__ */
-
-#define IVB_BASE		PHYS_OFFSET	/* in user space for intr/exc/trap/break table base, 64KB aligned
-						 * We defined at the start of the physical memory */
-
-/* dispatched sub-entry exception handler numbering */
-#define RD_PROT			0	/* read protrection */
-#define WRT_PROT		1	/* write protection */
-#define NOEXEC			2	/* non executable */
-#define PAGE_MODIFY		3	/* page modified */
-#define ACC_BIT			4	/* access bit */
-#define RESVED_PTE		5	/* reserved PTE attribute */
-/* reserved 6 ~ 16 */
-
-#endif /* _ASM_NDS32_NDS32_H_ */
diff --git a/arch/nds32/include/asm/nds32_fpu_inst.h b/arch/nds32/include/asm/nds32_fpu_inst.h
deleted file mode 100644
index 1e4b86a90a48..000000000000
--- a/arch/nds32/include/asm/nds32_fpu_inst.h
+++ /dev/null
@@ -1,109 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* Copyright (C) 2005-2018 Andes Technology Corporation */
-
-#ifndef __NDS32_FPU_INST_H
-#define __NDS32_FPU_INST_H
-
-#define cop0_op	0x35
-
-/*
- * COP0 field of opcodes.
- */
-#define fs1_op	0x0
-#define fs2_op  0x4
-#define fd1_op  0x8
-#define fd2_op  0xc
-
-/*
- * FS1 opcode.
- */
-enum fs1 {
-	fadds_op, fsubs_op, fcpynss_op, fcpyss_op,
-	fmadds_op, fmsubs_op, fcmovns_op, fcmovzs_op,
-	fnmadds_op, fnmsubs_op,
-	fmuls_op = 0xc, fdivs_op,
-	fs1_f2op_op = 0xf
-};
-
-/*
- * FS1/F2OP opcode.
- */
-enum fs1_f2 {
-	fs2d_op, fsqrts_op,
-	fui2s_op = 0x8, fsi2s_op = 0xc,
-	fs2ui_op = 0x10, fs2ui_z_op = 0x14,
-	fs2si_op = 0x18, fs2si_z_op = 0x1c
-};
-
-/*
- * FS2 opcode.
- */
-enum fs2 {
-	fcmpeqs_op, fcmpeqs_e_op, fcmplts_op, fcmplts_e_op,
-	fcmples_op, fcmples_e_op, fcmpuns_op, fcmpuns_e_op
-};
-
-/*
- * FD1 opcode.
- */
-enum fd1 {
-	faddd_op, fsubd_op, fcpynsd_op, fcpysd_op,
-	fmaddd_op, fmsubd_op, fcmovnd_op, fcmovzd_op,
-	fnmaddd_op, fnmsubd_op,
-	fmuld_op = 0xc, fdivd_op, fd1_f2op_op = 0xf
-};
-
-/*
- * FD1/F2OP opcode.
- */
-enum fd1_f2 {
-	fd2s_op, fsqrtd_op,
-	fui2d_op = 0x8, fsi2d_op = 0xc,
-	fd2ui_op = 0x10, fd2ui_z_op = 0x14,
-	fd2si_op = 0x18, fd2si_z_op = 0x1c
-};
-
-/*
- * FD2 opcode.
- */
-enum fd2 {
-	fcmpeqd_op, fcmpeqd_e_op, fcmpltd_op, fcmpltd_e_op,
-	fcmpled_op, fcmpled_e_op, fcmpund_op, fcmpund_e_op
-};
-
-#define NDS32Insn(x) x
-
-#define I_OPCODE_off			25
-#define NDS32Insn_OPCODE(x)		(NDS32Insn(x) >> I_OPCODE_off)
-
-#define I_OPCODE_offRt			20
-#define I_OPCODE_mskRt			(0x1fUL << I_OPCODE_offRt)
-#define NDS32Insn_OPCODE_Rt(x) \
-	((NDS32Insn(x) & I_OPCODE_mskRt) >> I_OPCODE_offRt)
-
-#define I_OPCODE_offRa			15
-#define I_OPCODE_mskRa			(0x1fUL << I_OPCODE_offRa)
-#define NDS32Insn_OPCODE_Ra(x) \
-	((NDS32Insn(x) & I_OPCODE_mskRa) >> I_OPCODE_offRa)
-
-#define I_OPCODE_offRb			10
-#define I_OPCODE_mskRb			(0x1fUL << I_OPCODE_offRb)
-#define NDS32Insn_OPCODE_Rb(x) \
-	((NDS32Insn(x) & I_OPCODE_mskRb) >> I_OPCODE_offRb)
-
-#define I_OPCODE_offbit1014		10
-#define I_OPCODE_mskbit1014		(0x1fUL << I_OPCODE_offbit1014)
-#define NDS32Insn_OPCODE_BIT1014(x) \
-	((NDS32Insn(x) & I_OPCODE_mskbit1014) >> I_OPCODE_offbit1014)
-
-#define I_OPCODE_offbit69		6
-#define I_OPCODE_mskbit69		(0xfUL << I_OPCODE_offbit69)
-#define NDS32Insn_OPCODE_BIT69(x) \
-	((NDS32Insn(x) & I_OPCODE_mskbit69) >> I_OPCODE_offbit69)
-
-#define I_OPCODE_offCOP0		0
-#define I_OPCODE_mskCOP0		(0x3fUL << I_OPCODE_offCOP0)
-#define NDS32Insn_OPCODE_COP0(x) \
-	((NDS32Insn(x) & I_OPCODE_mskCOP0) >> I_OPCODE_offCOP0)
-
-#endif /* __NDS32_FPU_INST_H */
diff --git a/arch/nds32/include/asm/page.h b/arch/nds32/include/asm/page.h
deleted file mode 100644
index add33a7f02c8..000000000000
--- a/arch/nds32/include/asm/page.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (C) 2005-2017 Andes Technology Corporation
- */
-
-#ifndef _ASMNDS32_PAGE_H
-#define _ASMNDS32_PAGE_H
-
-#ifdef CONFIG_ANDES_PAGE_SIZE_4KB
-#define PAGE_SHIFT      12
-#endif
-#ifdef CONFIG_ANDES_PAGE_SIZE_8KB
-#define PAGE_SHIFT      13
-#endif
-#include <linux/const.h>
-#define PAGE_SIZE       (_AC(1,UL) << PAGE_SHIFT)
-#define PAGE_MASK       (~(PAGE_SIZE-1))
-
-#ifdef __KERNEL__
-
-#ifndef __ASSEMBLY__
-
-struct page;
-struct vm_area_struct;
-#ifdef CONFIG_CPU_CACHE_ALIASING
-extern void copy_user_highpage(struct page *to, struct page *from,
-			       unsigned long vaddr, struct vm_area_struct *vma);
-extern void clear_user_highpage(struct page *page, unsigned long vaddr);
-
-void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
-		    struct page *to);
-void clear_user_page(void *addr, unsigned long vaddr, struct page *page);
-#define __HAVE_ARCH_COPY_USER_HIGHPAGE
-#define clear_user_highpage	clear_user_highpage
-#else
-#define clear_user_page(page, vaddr, pg)        clear_page(page)
-#define copy_user_page(to, from, vaddr, pg)     copy_page(to, from)
-#endif
-
-void clear_page(void *page);
-void copy_page(void *to, void *from);
-
-typedef unsigned long pte_t;
-typedef unsigned long pgd_t;
-typedef unsigned long pgprot_t;
-
-#define pte_val(x)      (x)
-#define pgd_val(x)	(x)
-#define pgprot_val(x)   (x)
-
-#define __pte(x)        (x)
-#define __pgd(x)        (x)
-#define __pgprot(x)     (x)
-
-typedef struct page *pgtable_t;
-
-#include <asm/memory.h>
-#include <asm-generic/getorder.h>
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* __KERNEL__ */
-
-#endif
diff --git a/arch/nds32/include/asm/perf_event.h b/arch/nds32/include/asm/perf_event.h
deleted file mode 100644
index fcdff02acc14..000000000000
--- a/arch/nds32/include/asm/perf_event.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* Copyright (C) 2008-2018 Andes Technology Corporation */
-
-#ifndef __ASM_PERF_EVENT_H
-#define __ASM_PERF_EVENT_H
-
-/*
- * This file is request by Perf,
- * please refer to tools/perf/design.txt for more details
- */
-struct pt_regs;
-unsigned long perf_instruction_pointer(struct pt_regs *regs);
-unsigned long perf_misc_flags(struct pt_regs *regs);
-#define perf_misc_flags(regs)   perf_misc_flags(regs)
-
-#endif
diff --git a/arch/nds32/include/asm/pgalloc.h b/arch/nds32/include/asm/pgalloc.h
deleted file mode 100644
index a08e1ebca70e..000000000000
--- a/arch/nds32/include/asm/pgalloc.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#ifndef _ASMNDS32_PGALLOC_H
-#define _ASMNDS32_PGALLOC_H
-
-#include <asm/processor.h>
-#include <asm/cacheflush.h>
-#include <asm/tlbflush.h>
-#include <asm/proc-fns.h>
-
-#define __HAVE_ARCH_PTE_ALLOC_ONE
-#include <asm-generic/pgalloc.h>	/* for pte_{alloc,free}_one */
-
-extern pgd_t *pgd_alloc(struct mm_struct *mm);
-extern void pgd_free(struct mm_struct *mm, pgd_t * pgd);
-
-static inline pgtable_t pte_alloc_one(struct mm_struct *mm)
-{
-	pgtable_t pte;
-
-	pte = __pte_alloc_one(mm, GFP_PGTABLE_USER);
-	if (pte)
-		cpu_dcache_wb_page((unsigned long)page_address(pte));
-
-	return pte;
-}
-
-/*
- * Populate the pmdp entry with a pointer to the pte.  This pmd is part
- * of the mm address space.
- *
- * Ensure that we always set both PMD entries.
- */
-static inline void
-pmd_populate_kernel(struct mm_struct *mm, pmd_t * pmdp, pte_t * ptep)
-{
-	unsigned long pte_ptr = (unsigned long)ptep;
-	unsigned long pmdval;
-
-	BUG_ON(mm != &init_mm);
-
-	/*
-	 * The pmd must be loaded with the physical
-	 * address of the PTE table
-	 */
-	pmdval = __pa(pte_ptr) | _PAGE_KERNEL_TABLE;
-	set_pmd(pmdp, __pmd(pmdval));
-}
-
-static inline void
-pmd_populate(struct mm_struct *mm, pmd_t * pmdp, pgtable_t ptep)
-{
-	unsigned long pmdval;
-
-	BUG_ON(mm == &init_mm);
-
-	pmdval = page_to_pfn(ptep) << PAGE_SHIFT | _PAGE_USER_TABLE;
-	set_pmd(pmdp, __pmd(pmdval));
-}
-
-#endif
diff --git a/arch/nds32/include/asm/pgtable.h b/arch/nds32/include/asm/pgtable.h
deleted file mode 100644
index 419f984eef70..000000000000
--- a/arch/nds32/include/asm/pgtable.h
+++ /dev/null
@@ -1,377 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#ifndef _ASMNDS32_PGTABLE_H
-#define _ASMNDS32_PGTABLE_H
-
-#include <asm-generic/pgtable-nopmd.h>
-#include <linux/sizes.h>
-
-#include <asm/memory.h>
-#include <asm/nds32.h>
-#ifndef __ASSEMBLY__
-#include <asm/fixmap.h>
-#include <nds32_intrinsic.h>
-#endif
-
-#ifdef CONFIG_ANDES_PAGE_SIZE_4KB
-#define PGDIR_SHIFT      22
-#define PTRS_PER_PGD     1024
-#define PTRS_PER_PTE     1024
-#endif
-
-#ifdef CONFIG_ANDES_PAGE_SIZE_8KB
-#define PGDIR_SHIFT      24
-#define PTRS_PER_PGD     256
-#define PTRS_PER_PTE     2048
-#endif
-
-#ifndef __ASSEMBLY__
-extern void __pte_error(const char *file, int line, unsigned long val);
-extern void __pgd_error(const char *file, int line, unsigned long val);
-
-#define pte_ERROR(pte)		__pte_error(__FILE__, __LINE__, pte_val(pte))
-#define pgd_ERROR(pgd)		__pgd_error(__FILE__, __LINE__, pgd_val(pgd))
-#endif /* !__ASSEMBLY__ */
-
-#define PMD_SIZE		(1UL << PMD_SHIFT)
-#define PMD_MASK		(~(PMD_SIZE-1))
-#define PGDIR_SIZE		(1UL << PGDIR_SHIFT)
-#define PGDIR_MASK		(~(PGDIR_SIZE-1))
-
-/*
- * This is the lowest virtual address we can permit any user space
- * mapping to be mapped at.  This is particularly important for
- * non-high vector CPUs.
- */
-#define FIRST_USER_ADDRESS	0x8000
-
-#ifdef CONFIG_HIGHMEM
-#define CONSISTENT_BASE		((PKMAP_BASE) - (SZ_2M))
-#define CONSISTENT_END		(PKMAP_BASE)
-#else
-#define CONSISTENT_BASE		(FIXADDR_START - SZ_2M)
-#define CONSISTENT_END		(FIXADDR_START)
-#endif
-#define CONSISTENT_OFFSET(x)	(((unsigned long)(x) - CONSISTENT_BASE) >> PAGE_SHIFT)
-
-#ifdef CONFIG_HIGHMEM
-#ifndef __ASSEMBLY__
-#include <asm/highmem.h>
-#endif
-#endif
-
-#define VMALLOC_RESERVE 	SZ_128M
-#define VMALLOC_END		(CONSISTENT_BASE - PAGE_SIZE)
-#define VMALLOC_START		((VMALLOC_END) - VMALLOC_RESERVE)
-#define VMALLOC_VMADDR(x)	((unsigned long)(x))
-#define MAXMEM			__pa(VMALLOC_START)
-#define MAXMEM_PFN		PFN_DOWN(MAXMEM)
-
-#define FIRST_USER_PGD_NR	0
-#define USER_PTRS_PER_PGD	((TASK_SIZE/PGDIR_SIZE) + FIRST_USER_PGD_NR)
-
-/* L2 PTE */
-#define _PAGE_V			(1UL << 0)
-
-#define _PAGE_M_XKRW            (0UL << 1)
-#define _PAGE_M_UR_KR		(1UL << 1)
-#define _PAGE_M_UR_KRW		(2UL << 1)
-#define _PAGE_M_URW_KRW		(3UL << 1)
-#define _PAGE_M_KR		(5UL << 1)
-#define _PAGE_M_KRW		(7UL << 1)
-
-#define _PAGE_D			(1UL << 4)
-#define _PAGE_E			(1UL << 5)
-#define _PAGE_A			(1UL << 6)
-#define _PAGE_G			(1UL << 7)
-
-#define _PAGE_C_DEV		(0UL << 8)
-#define _PAGE_C_DEV_WB		(1UL << 8)
-#define _PAGE_C_MEM		(2UL << 8)
-#define _PAGE_C_MEM_SHRD_WB	(4UL << 8)
-#define _PAGE_C_MEM_SHRD_WT	(5UL << 8)
-#define _PAGE_C_MEM_WB		(6UL << 8)
-#define _PAGE_C_MEM_WT		(7UL << 8)
-
-#define _PAGE_L			(1UL << 11)
-
-#define _HAVE_PAGE_L		(_PAGE_L)
-#define _PAGE_FILE		(1UL << 1)
-#define _PAGE_YOUNG		0
-#define _PAGE_M_MASK		_PAGE_M_KRW
-#define _PAGE_C_MASK		_PAGE_C_MEM_WT
-
-#ifdef CONFIG_SMP
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-#define _PAGE_CACHE_SHRD	_PAGE_C_MEM_SHRD_WT
-#else
-#define _PAGE_CACHE_SHRD	_PAGE_C_MEM_SHRD_WB
-#endif
-#else
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-#define _PAGE_CACHE_SHRD	_PAGE_C_MEM_WT
-#else
-#define _PAGE_CACHE_SHRD	_PAGE_C_MEM_WB
-#endif
-#endif
-
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-#define _PAGE_CACHE		_PAGE_C_MEM_WT
-#else
-#define _PAGE_CACHE		_PAGE_C_MEM_WB
-#endif
-
-#define _PAGE_IOREMAP \
-	(_PAGE_V | _PAGE_M_KRW | _PAGE_D | _PAGE_G | _PAGE_C_DEV)
-
-/*
- * + Level 1 descriptor (PMD)
- */
-#define PMD_TYPE_TABLE		0
-
-#ifndef __ASSEMBLY__
-
-#define _PAGE_USER_TABLE     PMD_TYPE_TABLE
-#define _PAGE_KERNEL_TABLE   PMD_TYPE_TABLE
-
-#define PAGE_EXEC	__pgprot(_PAGE_V | _PAGE_M_XKRW | _PAGE_E)
-#define PAGE_NONE	__pgprot(_PAGE_V | _PAGE_M_KRW | _PAGE_A)
-#define PAGE_READ	__pgprot(_PAGE_V | _PAGE_M_UR_KR)
-#define PAGE_RDWR	__pgprot(_PAGE_V | _PAGE_M_URW_KRW | _PAGE_D)
-#define PAGE_COPY	__pgprot(_PAGE_V | _PAGE_M_UR_KR)
-
-#define PAGE_UXKRWX_V1	__pgprot(_PAGE_V | _PAGE_M_KRW | _PAGE_D | _PAGE_E | _PAGE_G | _PAGE_CACHE_SHRD)
-#define PAGE_UXKRWX_V2	__pgprot(_PAGE_V | _PAGE_M_XKRW | _PAGE_D | _PAGE_E | _PAGE_G | _PAGE_CACHE_SHRD)
-#define PAGE_URXKRWX_V2	__pgprot(_PAGE_V | _PAGE_M_UR_KRW | _PAGE_D | _PAGE_E | _PAGE_G | _PAGE_CACHE_SHRD)
-#define PAGE_CACHE_L1	__pgprot(_HAVE_PAGE_L | _PAGE_V | _PAGE_M_KRW | _PAGE_D | _PAGE_E | _PAGE_G | _PAGE_CACHE)
-#define PAGE_MEMORY	__pgprot(_HAVE_PAGE_L | _PAGE_V | _PAGE_M_KRW | _PAGE_D | _PAGE_E | _PAGE_G | _PAGE_CACHE_SHRD)
-#define PAGE_KERNEL	__pgprot(_PAGE_V | _PAGE_M_KRW | _PAGE_D | _PAGE_E | _PAGE_G | _PAGE_CACHE_SHRD)
-#define PAGE_SHARED	__pgprot(_PAGE_V | _PAGE_M_URW_KRW | _PAGE_D | _PAGE_CACHE_SHRD)
-#define PAGE_DEVICE    __pgprot(_PAGE_V | _PAGE_M_KRW | _PAGE_D | _PAGE_G | _PAGE_C_DEV)
-#endif /* __ASSEMBLY__ */
-
-/*         xwr */
-#define __P000  (PAGE_NONE | _PAGE_CACHE_SHRD)
-#define __P001  (PAGE_READ | _PAGE_CACHE_SHRD)
-#define __P010  (PAGE_COPY | _PAGE_CACHE_SHRD)
-#define __P011  (PAGE_COPY | _PAGE_CACHE_SHRD)
-#define __P100  (PAGE_EXEC | _PAGE_CACHE_SHRD)
-#define __P101  (PAGE_READ | _PAGE_E | _PAGE_CACHE_SHRD)
-#define __P110  (PAGE_COPY | _PAGE_E | _PAGE_CACHE_SHRD)
-#define __P111  (PAGE_COPY | _PAGE_E | _PAGE_CACHE_SHRD)
-
-#define __S000  (PAGE_NONE | _PAGE_CACHE_SHRD)
-#define __S001  (PAGE_READ | _PAGE_CACHE_SHRD)
-#define __S010  (PAGE_RDWR | _PAGE_CACHE_SHRD)
-#define __S011  (PAGE_RDWR | _PAGE_CACHE_SHRD)
-#define __S100  (PAGE_EXEC | _PAGE_CACHE_SHRD)
-#define __S101  (PAGE_READ | _PAGE_E | _PAGE_CACHE_SHRD)
-#define __S110  (PAGE_RDWR | _PAGE_E | _PAGE_CACHE_SHRD)
-#define __S111  (PAGE_RDWR | _PAGE_E | _PAGE_CACHE_SHRD)
-
-#ifndef __ASSEMBLY__
-/*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-extern struct page *empty_zero_page;
-extern void paging_init(void);
-#define ZERO_PAGE(vaddr)	(empty_zero_page)
-
-#define pte_pfn(pte)		(pte_val(pte) >> PAGE_SHIFT)
-#define pfn_pte(pfn,prot)	(__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)))
-
-#define pte_none(pte)	        !(pte_val(pte))
-#define pte_clear(mm,addr,ptep)	set_pte_at((mm),(addr),(ptep), __pte(0))
-#define pte_page(pte)		(pfn_to_page(pte_pfn(pte)))
-
-static unsigned long pmd_page_vaddr(pmd_t pmd)
-{
-	return ((unsigned long) __va(pmd_val(pmd) & PAGE_MASK));
-}
-
-#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
-/*
- * Set a level 1 translation table entry, and clean it out of
- * any caches such that the MMUs can load it correctly.
- */
-static inline void set_pmd(pmd_t * pmdp, pmd_t pmd)
-{
-
-	*pmdp = pmd;
-#if !defined(CONFIG_CPU_DCACHE_DISABLE) && !defined(CONFIG_CPU_DCACHE_WRITETHROUGH)
-	__asm__ volatile ("\n\tcctl %0, L1D_VA_WB"::"r" (pmdp):"memory");
-	__nds32__msync_all();
-	__nds32__dsb();
-#endif
-}
-
-/*
- * Set a PTE and flush it out
- */
-static inline void set_pte(pte_t * ptep, pte_t pte)
-{
-
-	*ptep = pte;
-#if !defined(CONFIG_CPU_DCACHE_DISABLE) && !defined(CONFIG_CPU_DCACHE_WRITETHROUGH)
-	__asm__ volatile ("\n\tcctl %0, L1D_VA_WB"::"r" (ptep):"memory");
-	__nds32__msync_all();
-	__nds32__dsb();
-#endif
-}
-
-/*
- * The following only work if pte_present() is true.
- * Undefined behaviour if not..
- */
-
-/*
- * pte_write: 	     this page is writeable for user mode
- * pte_read:         this page is readable for user mode
- * pte_kernel_write: this page is writeable for kernel mode
- *
- * We don't have pte_kernel_read because kernel always can read.
- *
- * */
-
-#define pte_present(pte)        (pte_val(pte) & _PAGE_V)
-#define pte_write(pte)          ((pte_val(pte) & _PAGE_M_MASK) == _PAGE_M_URW_KRW)
-#define pte_read(pte)		(((pte_val(pte) & _PAGE_M_MASK) == _PAGE_M_UR_KR) || \
-				((pte_val(pte) & _PAGE_M_MASK) == _PAGE_M_UR_KRW) || \
-				((pte_val(pte) & _PAGE_M_MASK) == _PAGE_M_URW_KRW))
-#define pte_kernel_write(pte)   (((pte_val(pte) & _PAGE_M_MASK) == _PAGE_M_URW_KRW) || \
-				((pte_val(pte) & _PAGE_M_MASK) == _PAGE_M_UR_KRW) || \
-				((pte_val(pte) & _PAGE_M_MASK) == _PAGE_M_KRW) || \
-				(((pte_val(pte) & _PAGE_M_MASK) == _PAGE_M_XKRW) && pte_exec(pte)))
-#define pte_exec(pte)		(pte_val(pte) & _PAGE_E)
-#define pte_dirty(pte)		(pte_val(pte) & _PAGE_D)
-#define pte_young(pte)		(pte_val(pte) & _PAGE_YOUNG)
-
-/*
- * The following only works if pte_present() is not true.
- */
-#define pte_file(pte)		(pte_val(pte) & _PAGE_FILE)
-#define pte_to_pgoff(x)		(pte_val(x) >> 2)
-#define pgoff_to_pte(x)		__pte(((x) << 2) | _PAGE_FILE)
-
-#define PTE_FILE_MAX_BITS	29
-
-#define PTE_BIT_FUNC(fn,op) \
-static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; }
-
-static inline pte_t pte_wrprotect(pte_t pte)
-{
-	pte_val(pte) = pte_val(pte) & ~_PAGE_M_MASK;
-	pte_val(pte) = pte_val(pte) | _PAGE_M_UR_KR;
-	return pte;
-}
-
-static inline pte_t pte_mkwrite(pte_t pte)
-{
-	pte_val(pte) = pte_val(pte) & ~_PAGE_M_MASK;
-	pte_val(pte) = pte_val(pte) | _PAGE_M_URW_KRW;
-	return pte;
-}
-
-PTE_BIT_FUNC(exprotect, &=~_PAGE_E);
-PTE_BIT_FUNC(mkexec, |=_PAGE_E);
-PTE_BIT_FUNC(mkclean, &=~_PAGE_D);
-PTE_BIT_FUNC(mkdirty, |=_PAGE_D);
-PTE_BIT_FUNC(mkold, &=~_PAGE_YOUNG);
-PTE_BIT_FUNC(mkyoung, |=_PAGE_YOUNG);
-
-/*
- * Mark the prot value as uncacheable and unbufferable.
- */
-#define pgprot_noncached(prot)	   __pgprot((pgprot_val(prot)&~_PAGE_C_MASK) | _PAGE_C_DEV)
-#define pgprot_writecombine(prot)  __pgprot((pgprot_val(prot)&~_PAGE_C_MASK) | _PAGE_C_DEV_WB)
-
-#define pmd_none(pmd)         (pmd_val(pmd)&0x1)
-#define pmd_present(pmd)      (!pmd_none(pmd))
-#define	pmd_bad(pmd)	      pmd_none(pmd)
-
-#define copy_pmd(pmdpd,pmdps)	set_pmd((pmdpd), *(pmdps))
-#define pmd_clear(pmdp)		set_pmd((pmdp), __pmd(1))
-
-static inline pmd_t __mk_pmd(pte_t * ptep, unsigned long prot)
-{
-	unsigned long ptr = (unsigned long)ptep;
-	pmd_t pmd;
-
-	/*
-	 * The pmd must be loaded with the physical
-	 * address of the PTE table
-	 */
-
-	pmd_val(pmd) = __virt_to_phys(ptr) | prot;
-	return pmd;
-}
-
-#define pmd_page(pmd)        virt_to_page(__va(pmd_val(pmd)))
-
-/*
- * Permanent address of a page. We never have highmem, so this is trivial.
- */
-#define pages_to_mb(x)       ((x) >> (20 - PAGE_SHIFT))
-
-/*
- * Conversion functions: convert a page and protection to a page entry,
- * and a page entry and page directory to the page they refer to.
- */
-#define mk_pte(page,prot)	pfn_pte(page_to_pfn(page),prot)
-
-/*
- * The "pgd_xxx()" functions here are trivial for a folded two-level
- * setup: the pgd is never bad, and a pmd always exists (as it's folded
- * into the pgd entry)
- */
-#define pgd_none(pgd)		(0)
-#define pgd_bad(pgd)		(0)
-#define pgd_present(pgd)  	(1)
-#define pgd_clear(pgdp)		do { } while (0)
-
-#define page_pte_prot(page,prot)     	mk_pte(page, prot)
-#define page_pte(page)		        mk_pte(page, __pgprot(0))
-/*
- *     L1PTE = $mr1 + ((virt >> PMD_SHIFT) << 2);
- *     L2PTE = (((virt >> PAGE_SHIFT) & (PTRS_PER_PTE -1 )) << 2);
- *     PPN = (phys & 0xfffff000);
- *
-*/
-
-static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
-{
-	const unsigned long mask = 0xfff;
-	pte_val(pte) = (pte_val(pte) & ~mask) | (pgprot_val(newprot) & mask);
-	return pte;
-}
-
-extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
-
-/* Encode and decode a swap entry.
- *
- * We support up to 32GB of swap on 4k machines
- */
-#define __swp_type(x)	 	     (((x).val >> 2) & 0x7f)
-#define __swp_offset(x)	   	     ((x).val >> 9)
-#define __swp_entry(type,offset)     ((swp_entry_t) { ((type) << 2) | ((offset) << 9) })
-#define __pte_to_swp_entry(pte)	     ((swp_entry_t) { pte_val(pte) })
-#define __swp_entry_to_pte(swp)	     ((pte_t) { (swp).val })
-
-/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
-#define kern_addr_valid(addr)	(1)
-
-/*
- * We provide our own arch_get_unmapped_area to cope with VIPT caches.
- */
-#define HAVE_ARCH_UNMAPPED_AREA
-
-/*
- * remap a physical address `phys' of size `size' with page protection `prot'
- * into virtual address `from'
- */
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* _ASMNDS32_PGTABLE_H */
diff --git a/arch/nds32/include/asm/pmu.h b/arch/nds32/include/asm/pmu.h
deleted file mode 100644
index e1ac0b0b8bcf..000000000000
--- a/arch/nds32/include/asm/pmu.h
+++ /dev/null
@@ -1,386 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* Copyright (C) 2008-2018 Andes Technology Corporation */
-
-#ifndef __ASM_PMU_H
-#define __ASM_PMU_H
-
-#include <linux/interrupt.h>
-#include <linux/perf_event.h>
-#include <asm/unistd.h>
-#include <asm/bitfield.h>
-
-/* Has special meaning for perf core implementation */
-#define HW_OP_UNSUPPORTED		0x0
-#define C(_x)				PERF_COUNT_HW_CACHE_##_x
-#define CACHE_OP_UNSUPPORTED		0x0
-
-/* Enough for both software and hardware defined events */
-#define SOFTWARE_EVENT_MASK		0xFF
-
-#define PFM_OFFSET_MAGIC_0		2	/* DO NOT START FROM 0 */
-#define PFM_OFFSET_MAGIC_1		(PFM_OFFSET_MAGIC_0 + 36)
-#define PFM_OFFSET_MAGIC_2		(PFM_OFFSET_MAGIC_1 + 36)
-
-enum { PFMC0, PFMC1, PFMC2, MAX_COUNTERS };
-
-u32 PFM_CTL_OVF[3] = { PFM_CTL_mskOVF0, PFM_CTL_mskOVF1,
-		       PFM_CTL_mskOVF2 };
-u32 PFM_CTL_EN[3] = { PFM_CTL_mskEN0, PFM_CTL_mskEN1,
-		      PFM_CTL_mskEN2 };
-u32 PFM_CTL_OFFSEL[3] = { PFM_CTL_offSEL0, PFM_CTL_offSEL1,
-			  PFM_CTL_offSEL2 };
-u32 PFM_CTL_IE[3] = { PFM_CTL_mskIE0, PFM_CTL_mskIE1, PFM_CTL_mskIE2 };
-u32 PFM_CTL_KS[3] = { PFM_CTL_mskKS0, PFM_CTL_mskKS1, PFM_CTL_mskKS2 };
-u32 PFM_CTL_KU[3] = { PFM_CTL_mskKU0, PFM_CTL_mskKU1, PFM_CTL_mskKU2 };
-u32 PFM_CTL_SEL[3] = { PFM_CTL_mskSEL0, PFM_CTL_mskSEL1, PFM_CTL_mskSEL2 };
-/*
- * Perf Events' indices
- */
-#define NDS32_IDX_CYCLE_COUNTER			0
-#define NDS32_IDX_COUNTER0			1
-#define NDS32_IDX_COUNTER1			2
-
-/* The events for a given PMU register set. */
-struct pmu_hw_events {
-	/*
-	 * The events that are active on the PMU for the given index.
-	 */
-	struct perf_event *events[MAX_COUNTERS];
-
-	/*
-	 * A 1 bit for an index indicates that the counter is being used for
-	 * an event. A 0 means that the counter can be used.
-	 */
-	unsigned long used_mask[BITS_TO_LONGS(MAX_COUNTERS)];
-
-	/*
-	 * Hardware lock to serialize accesses to PMU registers. Needed for the
-	 * read/modify/write sequences.
-	 */
-	raw_spinlock_t pmu_lock;
-};
-
-struct nds32_pmu {
-	struct pmu pmu;
-	cpumask_t active_irqs;
-	char *name;
-	 irqreturn_t (*handle_irq)(int irq_num, void *dev);
-	void (*enable)(struct perf_event *event);
-	void (*disable)(struct perf_event *event);
-	int (*get_event_idx)(struct pmu_hw_events *hw_events,
-			     struct perf_event *event);
-	int (*set_event_filter)(struct hw_perf_event *evt,
-				struct perf_event_attr *attr);
-	u32 (*read_counter)(struct perf_event *event);
-	void (*write_counter)(struct perf_event *event, u32 val);
-	void (*start)(struct nds32_pmu *nds32_pmu);
-	void (*stop)(struct nds32_pmu *nds32_pmu);
-	void (*reset)(void *data);
-	int (*request_irq)(struct nds32_pmu *nds32_pmu, irq_handler_t handler);
-	void (*free_irq)(struct nds32_pmu *nds32_pmu);
-	int (*map_event)(struct perf_event *event);
-	int num_events;
-	atomic_t active_events;
-	u64 max_period;
-	struct platform_device *plat_device;
-	struct pmu_hw_events *(*get_hw_events)(void);
-};
-
-#define to_nds32_pmu(p)			(container_of(p, struct nds32_pmu, pmu))
-
-int nds32_pmu_register(struct nds32_pmu *nds32_pmu, int type);
-
-u64 nds32_pmu_event_update(struct perf_event *event);
-
-int nds32_pmu_event_set_period(struct perf_event *event);
-
-/*
- * Common NDS32 SPAv3 event types
- *
- * Note: An implementation may not be able to count all of these events
- * but the encodings are considered to be `reserved' in the case that
- * they are not available.
- *
- * SEL_TOTAL_CYCLES will add an offset is due to ZERO is defined as
- * NOT_SUPPORTED EVENT mapping in generic perf code.
- * You will need to deal it in the event writing implementation.
- */
-enum spav3_counter_0_perf_types {
-	SPAV3_0_SEL_BASE = -1 + PFM_OFFSET_MAGIC_0,	/* counting symbol */
-	SPAV3_0_SEL_TOTAL_CYCLES = 0 + PFM_OFFSET_MAGIC_0,
-	SPAV3_0_SEL_COMPLETED_INSTRUCTION = 1 + PFM_OFFSET_MAGIC_0,
-	SPAV3_0_SEL_LAST	/* counting symbol */
-};
-
-enum spav3_counter_1_perf_types {
-	SPAV3_1_SEL_BASE = -1 + PFM_OFFSET_MAGIC_1,	/* counting symbol */
-	SPAV3_1_SEL_TOTAL_CYCLES = 0 + PFM_OFFSET_MAGIC_1,
-	SPAV3_1_SEL_COMPLETED_INSTRUCTION = 1 + PFM_OFFSET_MAGIC_1,
-	SPAV3_1_SEL_CONDITIONAL_BRANCH = 2 + PFM_OFFSET_MAGIC_1,
-	SPAV3_1_SEL_TAKEN_CONDITIONAL_BRANCH = 3 + PFM_OFFSET_MAGIC_1,
-	SPAV3_1_SEL_PREFETCH_INSTRUCTION = 4 + PFM_OFFSET_MAGIC_1,
-	SPAV3_1_SEL_RET_INST = 5 + PFM_OFFSET_MAGIC_1,
-	SPAV3_1_SEL_JR_INST = 6 + PFM_OFFSET_MAGIC_1,
-	SPAV3_1_SEL_JAL_JRAL_INST = 7 + PFM_OFFSET_MAGIC_1,
-	SPAV3_1_SEL_NOP_INST = 8 + PFM_OFFSET_MAGIC_1,
-	SPAV3_1_SEL_SCW_INST = 9 + PFM_OFFSET_MAGIC_1,
-	SPAV3_1_SEL_ISB_DSB_INST = 10 + PFM_OFFSET_MAGIC_1,
-	SPAV3_1_SEL_CCTL_INST = 11 + PFM_OFFSET_MAGIC_1,
-	SPAV3_1_SEL_TAKEN_INTERRUPTS = 12 + PFM_OFFSET_MAGIC_1,
-	SPAV3_1_SEL_LOADS_COMPLETED = 13 + PFM_OFFSET_MAGIC_1,
-	SPAV3_1_SEL_UITLB_ACCESS = 14 + PFM_OFFSET_MAGIC_1,
-	SPAV3_1_SEL_UDTLB_ACCESS = 15 + PFM_OFFSET_MAGIC_1,
-	SPAV3_1_SEL_MTLB_ACCESS = 16 + PFM_OFFSET_MAGIC_1,
-	SPAV3_1_SEL_CODE_CACHE_ACCESS = 17 + PFM_OFFSET_MAGIC_1,
-	SPAV3_1_SEL_DATA_DEPENDENCY_STALL_CYCLES = 18 + PFM_OFFSET_MAGIC_1,
-	SPAV3_1_SEL_DATA_CACHE_MISS_STALL_CYCLES = 19 + PFM_OFFSET_MAGIC_1,
-	SPAV3_1_SEL_DATA_CACHE_ACCESS = 20 + PFM_OFFSET_MAGIC_1,
-	SPAV3_1_SEL_DATA_CACHE_MISS = 21 + PFM_OFFSET_MAGIC_1,
-	SPAV3_1_SEL_LOAD_DATA_CACHE_ACCESS = 22 + PFM_OFFSET_MAGIC_1,
-	SPAV3_1_SEL_STORE_DATA_CACHE_ACCESS = 23 + PFM_OFFSET_MAGIC_1,
-	SPAV3_1_SEL_ILM_ACCESS = 24 + PFM_OFFSET_MAGIC_1,
-	SPAV3_1_SEL_LSU_BIU_CYCLES = 25 + PFM_OFFSET_MAGIC_1,
-	SPAV3_1_SEL_HPTWK_BIU_CYCLES = 26 + PFM_OFFSET_MAGIC_1,
-	SPAV3_1_SEL_DMA_BIU_CYCLES = 27 + PFM_OFFSET_MAGIC_1,
-	SPAV3_1_SEL_CODE_CACHE_FILL_BIU_CYCLES = 28 + PFM_OFFSET_MAGIC_1,
-	SPAV3_1_SEL_LEGAL_UNALIGN_DCACHE_ACCESS = 29 + PFM_OFFSET_MAGIC_1,
-	SPAV3_1_SEL_PUSH25 = 30 + PFM_OFFSET_MAGIC_1,
-	SPAV3_1_SEL_SYSCALLS_INST = 31 + PFM_OFFSET_MAGIC_1,
-	SPAV3_1_SEL_LAST	/* counting symbol */
-};
-
-enum spav3_counter_2_perf_types {
-	SPAV3_2_SEL_BASE = -1 + PFM_OFFSET_MAGIC_2,	/* counting symbol */
-	SPAV3_2_SEL_TOTAL_CYCLES = 0 + PFM_OFFSET_MAGIC_2,
-	SPAV3_2_SEL_COMPLETED_INSTRUCTION = 1 + PFM_OFFSET_MAGIC_2,
-	SPAV3_2_SEL_CONDITIONAL_BRANCH_MISPREDICT = 2 + PFM_OFFSET_MAGIC_2,
-	SPAV3_2_SEL_TAKEN_CONDITIONAL_BRANCH_MISPREDICT =
-	    3 + PFM_OFFSET_MAGIC_2,
-	SPAV3_2_SEL_PREFETCH_INSTRUCTION_CACHE_HIT = 4 + PFM_OFFSET_MAGIC_2,
-	SPAV3_1_SEL_RET_MISPREDICT = 5 + PFM_OFFSET_MAGIC_2,
-	SPAV3_1_SEL_IMMEDIATE_J_INST = 6 + PFM_OFFSET_MAGIC_2,
-	SPAV3_1_SEL_MULTIPLY_INST = 7 + PFM_OFFSET_MAGIC_2,
-	SPAV3_1_SEL_16_BIT_INST = 8 + PFM_OFFSET_MAGIC_2,
-	SPAV3_1_SEL_FAILED_SCW_INST = 9 + PFM_OFFSET_MAGIC_2,
-	SPAV3_1_SEL_LD_AFTER_ST_CONFLICT_REPLAYS = 10 + PFM_OFFSET_MAGIC_2,
-	SPAV3_1_SEL_TAKEN_EXCEPTIONS = 12 + PFM_OFFSET_MAGIC_2,
-	SPAV3_1_SEL_STORES_COMPLETED = 13 + PFM_OFFSET_MAGIC_2,
-	SPAV3_2_SEL_UITLB_MISS = 14 + PFM_OFFSET_MAGIC_2,
-	SPAV3_2_SEL_UDTLB_MISS = 15 + PFM_OFFSET_MAGIC_2,
-	SPAV3_2_SEL_MTLB_MISS = 16 + PFM_OFFSET_MAGIC_2,
-	SPAV3_2_SEL_CODE_CACHE_MISS = 17 + PFM_OFFSET_MAGIC_2,
-	SPAV3_1_SEL_EMPTY_INST_QUEUE_STALL_CYCLES = 18 + PFM_OFFSET_MAGIC_2,
-	SPAV3_1_SEL_DATA_WRITE_BACK = 19 + PFM_OFFSET_MAGIC_2,
-	SPAV3_2_SEL_DATA_CACHE_MISS = 21 + PFM_OFFSET_MAGIC_2,
-	SPAV3_2_SEL_LOAD_DATA_CACHE_MISS = 22 + PFM_OFFSET_MAGIC_2,
-	SPAV3_2_SEL_STORE_DATA_CACHE_MISS = 23 + PFM_OFFSET_MAGIC_2,
-	SPAV3_1_SEL_DLM_ACCESS = 24 + PFM_OFFSET_MAGIC_2,
-	SPAV3_1_SEL_LSU_BIU_REQUEST = 25 + PFM_OFFSET_MAGIC_2,
-	SPAV3_1_SEL_HPTWK_BIU_REQUEST = 26 + PFM_OFFSET_MAGIC_2,
-	SPAV3_1_SEL_DMA_BIU_REQUEST = 27 + PFM_OFFSET_MAGIC_2,
-	SPAV3_1_SEL_CODE_CACHE_FILL_BIU_REQUEST = 28 + PFM_OFFSET_MAGIC_2,
-	SPAV3_1_SEL_EXTERNAL_EVENTS = 29 + PFM_OFFSET_MAGIC_2,
-	SPAV3_1_SEL_POP25 = 30 + PFM_OFFSET_MAGIC_2,
-	SPAV3_2_SEL_LAST	/* counting symbol */
-};
-
-/* Get converted event counter index */
-static inline int get_converted_event_idx(unsigned long event)
-{
-	int idx;
-
-	if ((event) > SPAV3_0_SEL_BASE && event < SPAV3_0_SEL_LAST) {
-		idx = 0;
-	} else if ((event) > SPAV3_1_SEL_BASE && event < SPAV3_1_SEL_LAST) {
-		idx = 1;
-	} else if ((event) > SPAV3_2_SEL_BASE && event < SPAV3_2_SEL_LAST) {
-		idx = 2;
-	} else {
-		pr_err("GET_CONVERTED_EVENT_IDX PFM counter range error\n");
-		return -EPERM;
-	}
-
-	return idx;
-}
-
-/* Get converted hardware event number */
-static inline u32 get_converted_evet_hw_num(u32 event)
-{
-	if (event > SPAV3_0_SEL_BASE && event < SPAV3_0_SEL_LAST)
-		event -= PFM_OFFSET_MAGIC_0;
-	else if (event > SPAV3_1_SEL_BASE && event < SPAV3_1_SEL_LAST)
-		event -= PFM_OFFSET_MAGIC_1;
-	else if (event > SPAV3_2_SEL_BASE && event < SPAV3_2_SEL_LAST)
-		event -= PFM_OFFSET_MAGIC_2;
-	else if (event != 0)
-		pr_err("GET_CONVERTED_EVENT_HW_NUM PFM counter range error\n");
-
-	return event;
-}
-
-/*
- * NDS32 HW events mapping
- *
- * The hardware events that we support. We do support cache operations but
- * we have harvard caches and no way to combine instruction and data
- * accesses/misses in hardware.
- */
-static const unsigned int nds32_pfm_perf_map[PERF_COUNT_HW_MAX] = {
-	[PERF_COUNT_HW_CPU_CYCLES] = SPAV3_0_SEL_TOTAL_CYCLES,
-	[PERF_COUNT_HW_INSTRUCTIONS] = SPAV3_1_SEL_COMPLETED_INSTRUCTION,
-	[PERF_COUNT_HW_CACHE_REFERENCES] = SPAV3_1_SEL_DATA_CACHE_ACCESS,
-	[PERF_COUNT_HW_CACHE_MISSES] = SPAV3_2_SEL_DATA_CACHE_MISS,
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_BRANCH_MISSES] = HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = HW_OP_UNSUPPORTED,
-	[PERF_COUNT_HW_REF_CPU_CYCLES] = HW_OP_UNSUPPORTED
-};
-
-static const unsigned int nds32_pfm_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
-	[PERF_COUNT_HW_CACHE_OP_MAX]
-	[PERF_COUNT_HW_CACHE_RESULT_MAX] = {
-	[C(L1D)] = {
-		    [C(OP_READ)] = {
-				    [C(RESULT_ACCESS)] =
-				    SPAV3_1_SEL_LOAD_DATA_CACHE_ACCESS,
-				    [C(RESULT_MISS)] =
-				    SPAV3_2_SEL_LOAD_DATA_CACHE_MISS,
-				    },
-		    [C(OP_WRITE)] = {
-				     [C(RESULT_ACCESS)] =
-				     SPAV3_1_SEL_STORE_DATA_CACHE_ACCESS,
-				     [C(RESULT_MISS)] =
-				     SPAV3_2_SEL_STORE_DATA_CACHE_MISS,
-				     },
-		    [C(OP_PREFETCH)] = {
-					[C(RESULT_ACCESS)] =
-						CACHE_OP_UNSUPPORTED,
-					[C(RESULT_MISS)] =
-						CACHE_OP_UNSUPPORTED,
-					},
-		    },
-	[C(L1I)] = {
-		    [C(OP_READ)] = {
-				    [C(RESULT_ACCESS)] =
-				    SPAV3_1_SEL_CODE_CACHE_ACCESS,
-				    [C(RESULT_MISS)] =
-				    SPAV3_2_SEL_CODE_CACHE_MISS,
-				    },
-		    [C(OP_WRITE)] = {
-				     [C(RESULT_ACCESS)] =
-				     SPAV3_1_SEL_CODE_CACHE_ACCESS,
-				     [C(RESULT_MISS)] =
-				     SPAV3_2_SEL_CODE_CACHE_MISS,
-				     },
-		    [C(OP_PREFETCH)] = {
-					[C(RESULT_ACCESS)] =
-					CACHE_OP_UNSUPPORTED,
-					[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
-					},
-		    },
-	/* TODO: L2CC */
-	[C(LL)] = {
-		   [C(OP_READ)] = {
-				   [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
-				   [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
-				   },
-		   [C(OP_WRITE)] = {
-				    [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
-				    [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
-				    },
-		   [C(OP_PREFETCH)] = {
-				       [C(RESULT_ACCESS)] =
-				       CACHE_OP_UNSUPPORTED,
-				       [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
-				       },
-		   },
-	/* NDS32 PMU does not support TLB read/write hit/miss,
-	 * However, it can count access/miss, which mixed with read and write.
-	 * Therefore, only READ counter will use it.
-	 * We do as possible as we can.
-	 */
-	[C(DTLB)] = {
-		     [C(OP_READ)] = {
-				     [C(RESULT_ACCESS)] =
-					SPAV3_1_SEL_UDTLB_ACCESS,
-				     [C(RESULT_MISS)] =
-					SPAV3_2_SEL_UDTLB_MISS,
-				     },
-		     [C(OP_WRITE)] = {
-				      [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
-				      [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
-				      },
-		     [C(OP_PREFETCH)] = {
-					 [C(RESULT_ACCESS)] =
-					 CACHE_OP_UNSUPPORTED,
-					 [C(RESULT_MISS)] =
-					 CACHE_OP_UNSUPPORTED,
-					 },
-		     },
-	[C(ITLB)] = {
-		     [C(OP_READ)] = {
-				     [C(RESULT_ACCESS)] =
-					SPAV3_1_SEL_UITLB_ACCESS,
-				     [C(RESULT_MISS)] =
-					SPAV3_2_SEL_UITLB_MISS,
-				     },
-		     [C(OP_WRITE)] = {
-				      [C(RESULT_ACCESS)] =
-					CACHE_OP_UNSUPPORTED,
-				      [C(RESULT_MISS)] =
-					CACHE_OP_UNSUPPORTED,
-				      },
-		     [C(OP_PREFETCH)] = {
-					 [C(RESULT_ACCESS)] =
-						CACHE_OP_UNSUPPORTED,
-					 [C(RESULT_MISS)] =
-						CACHE_OP_UNSUPPORTED,
-					 },
-		     },
-	[C(BPU)] = {		/* What is BPU? */
-		    [C(OP_READ)] = {
-				    [C(RESULT_ACCESS)] =
-					CACHE_OP_UNSUPPORTED,
-				    [C(RESULT_MISS)] =
-					CACHE_OP_UNSUPPORTED,
-				    },
-		    [C(OP_WRITE)] = {
-				     [C(RESULT_ACCESS)] =
-					CACHE_OP_UNSUPPORTED,
-				     [C(RESULT_MISS)] =
-					CACHE_OP_UNSUPPORTED,
-				     },
-		    [C(OP_PREFETCH)] = {
-					[C(RESULT_ACCESS)] =
-						CACHE_OP_UNSUPPORTED,
-					[C(RESULT_MISS)] =
-						CACHE_OP_UNSUPPORTED,
-					},
-		    },
-	[C(NODE)] = {		/* What is NODE? */
-		     [C(OP_READ)] = {
-				     [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
-				     [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
-				     },
-		     [C(OP_WRITE)] = {
-				      [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
-				      [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
-				      },
-		     [C(OP_PREFETCH)] = {
-					 [C(RESULT_ACCESS)] =
-						CACHE_OP_UNSUPPORTED,
-					 [C(RESULT_MISS)] =
-						CACHE_OP_UNSUPPORTED,
-					 },
-		     },
-};
-
-int nds32_pmu_map_event(struct perf_event *event,
-			const unsigned int (*event_map)[PERF_COUNT_HW_MAX],
-			const unsigned int (*cache_map)[PERF_COUNT_HW_CACHE_MAX]
-			[PERF_COUNT_HW_CACHE_OP_MAX]
-			[PERF_COUNT_HW_CACHE_RESULT_MAX], u32 raw_event_mask);
-
-#endif /* __ASM_PMU_H */
diff --git a/arch/nds32/include/asm/proc-fns.h b/arch/nds32/include/asm/proc-fns.h
deleted file mode 100644
index 27c617fa77af..000000000000
--- a/arch/nds32/include/asm/proc-fns.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#ifndef __NDS32_PROCFNS_H__
-#define __NDS32_PROCFNS_H__
-
-#ifdef __KERNEL__
-#include <asm/page.h>
-
-struct mm_struct;
-struct vm_area_struct;
-extern void cpu_proc_init(void);
-extern void cpu_proc_fin(void);
-extern void cpu_do_idle(void);
-extern void cpu_reset(unsigned long reset);
-extern void cpu_switch_mm(struct mm_struct *mm);
-
-extern void cpu_dcache_inval_all(void);
-extern void cpu_dcache_wbinval_all(void);
-extern void cpu_dcache_inval_page(unsigned long page);
-extern void cpu_dcache_wb_page(unsigned long page);
-extern void cpu_dcache_wbinval_page(unsigned long page);
-extern void cpu_dcache_inval_range(unsigned long start, unsigned long end);
-extern void cpu_dcache_wb_range(unsigned long start, unsigned long end);
-extern void cpu_dcache_wbinval_range(unsigned long start, unsigned long end);
-
-extern void cpu_icache_inval_all(void);
-extern void cpu_icache_inval_page(unsigned long page);
-extern void cpu_icache_inval_range(unsigned long start, unsigned long end);
-
-extern void cpu_cache_wbinval_page(unsigned long page, int flushi);
-extern void cpu_cache_wbinval_range(unsigned long start,
-				    unsigned long end, int flushi);
-extern void cpu_cache_wbinval_range_check(struct vm_area_struct *vma,
-					  unsigned long start,
-					  unsigned long end, bool flushi,
-					  bool wbd);
-
-extern void cpu_dma_wb_range(unsigned long start, unsigned long end);
-extern void cpu_dma_inval_range(unsigned long start, unsigned long end);
-extern void cpu_dma_wbinval_range(unsigned long start, unsigned long end);
-
-#endif /* __KERNEL__ */
-#endif /* __NDS32_PROCFNS_H__ */
diff --git a/arch/nds32/include/asm/processor.h b/arch/nds32/include/asm/processor.h
deleted file mode 100644
index e6bfc74972bb..000000000000
--- a/arch/nds32/include/asm/processor.h
+++ /dev/null
@@ -1,104 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#ifndef __ASM_NDS32_PROCESSOR_H
-#define __ASM_NDS32_PROCESSOR_H
-
-#ifdef __KERNEL__
-
-#include <asm/ptrace.h>
-#include <asm/types.h>
-#include <asm/sigcontext.h>
-
-#define KERNEL_STACK_SIZE	PAGE_SIZE
-#define STACK_TOP	TASK_SIZE
-#define STACK_TOP_MAX   TASK_SIZE
-
-struct cpu_context {
-	unsigned long r6;
-	unsigned long r7;
-	unsigned long r8;
-	unsigned long r9;
-	unsigned long r10;
-	unsigned long r11;
-	unsigned long r12;
-	unsigned long r13;
-	unsigned long r14;
-	unsigned long fp;
-	unsigned long pc;
-	unsigned long sp;
-};
-
-struct thread_struct {
-	struct cpu_context cpu_context;	/* cpu context */
-	/* fault info     */
-	unsigned long address;
-	unsigned long trap_no;
-	unsigned long error_code;
-
-	struct fpu_struct fpu;
-};
-
-#define INIT_THREAD  {	}
-
-#ifdef __NDS32_EB__
-#define PSW_DE	PSW_mskBE
-#else
-#define PSW_DE	0x0
-#endif
-
-#ifdef CONFIG_WBNA
-#define PSW_valWBNA	PSW_mskWBNA
-#else
-#define PSW_valWBNA	0x0
-#endif
-
-#ifdef CONFIG_HWZOL
-#define	PSW_valINIT (PSW_CPL_ANY | PSW_mskAEN | PSW_valWBNA | PSW_mskDT | PSW_mskIT | PSW_DE | PSW_mskGIE)
-#else
-#define	PSW_valINIT (PSW_CPL_ANY | PSW_valWBNA | PSW_mskDT | PSW_mskIT | PSW_DE | PSW_mskGIE)
-#endif
-
-#define start_thread(regs,pc,stack)			\
-({							\
-	memzero(regs, sizeof(struct pt_regs));		\
-	forget_syscall(regs);				\
-	regs->ipsw = PSW_valINIT;			\
-	regs->ir0 = (PSW_CPL_ANY | PSW_valWBNA | PSW_mskDT | PSW_mskIT | PSW_DE | PSW_SYSTEM | PSW_INTL_1);	\
-	regs->ipc = pc;					\
-	regs->sp = stack;				\
-})
-
-/* Forward declaration, a strange C thing */
-struct task_struct;
-
-/* Free all resources held by a thread. */
-#define release_thread(thread) do { } while(0)
-#if IS_ENABLED(CONFIG_FPU)
-#if !IS_ENABLED(CONFIG_UNLAZU_FPU)
-extern struct task_struct *last_task_used_math;
-#endif
-#endif
-
-/* Prepare to copy thread state - unlazy all lazy status */
-#define prepare_to_copy(tsk)	do { } while (0)
-
-unsigned long __get_wchan(struct task_struct *p);
-
-#define cpu_relax()			barrier()
-
-#define task_pt_regs(task) \
-	((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE \
-		- 8) - 1)
-
-/*
- * Create a new kernel thread
- */
-extern int kernel_thread(int (*fn) (void *), void *arg, unsigned long flags);
-
-#define KSTK_EIP(tsk)	instruction_pointer(task_pt_regs(tsk))
-#define KSTK_ESP(tsk)	user_stack_pointer(task_pt_regs(tsk))
-
-#endif
-
-#endif /* __ASM_NDS32_PROCESSOR_H */
diff --git a/arch/nds32/include/asm/ptrace.h b/arch/nds32/include/asm/ptrace.h
deleted file mode 100644
index 919ee223620c..000000000000
--- a/arch/nds32/include/asm/ptrace.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#ifndef __ASM_NDS32_PTRACE_H
-#define __ASM_NDS32_PTRACE_H
-
-#include <uapi/asm/ptrace.h>
-
-/*
- * If pt_regs.syscallno == NO_SYSCALL, then the thread is not executing
- * a syscall -- i.e., its most recent entry into the kernel from
- * userspace was not via syscall, or otherwise a tracer cancelled the
- * syscall.
- *
- * This must have the value -1, for ABI compatibility with ptrace etc.
- */
-#define NO_SYSCALL (-1)
-#ifndef __ASSEMBLY__
-#include <linux/types.h>
-
-struct pt_regs {
-	union {
-		struct user_pt_regs user_regs;
-		struct {
-			long uregs[26];
-			long fp;
-			long gp;
-			long lp;
-			long sp;
-			long ipc;
-#if defined(CONFIG_HWZOL)
-			long lb;
-			long le;
-			long lc;
-#else
-			long dummy[3];
-#endif
-			long syscallno;
-		};
-	};
-	long orig_r0;
-	long ir0;
-	long ipsw;
-	long pipsw;
-	long pipc;
-	long pp0;
-	long pp1;
-	long fucop_ctl;
-	long osp;
-};
-
-static inline bool in_syscall(struct pt_regs const *regs)
-{
-	return regs->syscallno != NO_SYSCALL;
-}
-
-static inline void forget_syscall(struct pt_regs *regs)
-{
-	regs->syscallno = NO_SYSCALL;
-}
-static inline unsigned long regs_return_value(struct pt_regs *regs)
-{
-	return regs->uregs[0];
-}
-extern void show_regs(struct pt_regs *);
-/* Avoid circular header include via sched.h */
-struct task_struct;
-
-#define arch_has_single_step()		(1)
-#define user_mode(regs)			(((regs)->ipsw & PSW_mskPOM) == 0)
-#define interrupts_enabled(regs)	(!!((regs)->ipsw & PSW_mskGIE))
-#define user_stack_pointer(regs)	((regs)->sp)
-#define instruction_pointer(regs)	((regs)->ipc)
-#define profile_pc(regs) 		instruction_pointer(regs)
-
-#endif /* __ASSEMBLY__ */
-#endif
diff --git a/arch/nds32/include/asm/sfp-machine.h b/arch/nds32/include/asm/sfp-machine.h
deleted file mode 100644
index b1a5caa332b5..000000000000
--- a/arch/nds32/include/asm/sfp-machine.h
+++ /dev/null
@@ -1,158 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* Copyright (C) 2005-2018 Andes Technology Corporation */
-
-#include <asm/bitfield.h>
-
-#define _FP_W_TYPE_SIZE		32
-#define _FP_W_TYPE		unsigned long
-#define _FP_WS_TYPE		signed long
-#define _FP_I_TYPE		long
-
-#define __ll_B ((UWtype) 1 << (W_TYPE_SIZE / 2))
-#define __ll_lowpart(t) ((UWtype) (t) & (__ll_B - 1))
-#define __ll_highpart(t) ((UWtype) (t) >> (W_TYPE_SIZE / 2))
-
-#define _FP_MUL_MEAT_S(R, X, Y)				\
-	_FP_MUL_MEAT_1_wide(_FP_WFRACBITS_S, R, X, Y, umul_ppmm)
-#define _FP_MUL_MEAT_D(R, X, Y)				\
-	_FP_MUL_MEAT_2_wide(_FP_WFRACBITS_D, R, X, Y, umul_ppmm)
-#define _FP_MUL_MEAT_Q(R, X, Y)				\
-	_FP_MUL_MEAT_4_wide(_FP_WFRACBITS_Q, R, X, Y, umul_ppmm)
-
-#define _FP_MUL_MEAT_DW_S(R, X, Y)			\
-	_FP_MUL_MEAT_DW_1_wide(_FP_WFRACBITS_S, R, X, Y, umul_ppmm)
-#define _FP_MUL_MEAT_DW_D(R, X, Y)			\
-	_FP_MUL_MEAT_DW_2_wide(_FP_WFRACBITS_D, R, X, Y, umul_ppmm)
-
-#define _FP_DIV_MEAT_S(R, X, Y)	_FP_DIV_MEAT_1_udiv_norm(S, R, X, Y)
-#define _FP_DIV_MEAT_D(R, X, Y)	_FP_DIV_MEAT_2_udiv(D, R, X, Y)
-
-#define _FP_NANFRAC_S		((_FP_QNANBIT_S << 1) - 1)
-#define _FP_NANFRAC_D		((_FP_QNANBIT_D << 1) - 1), -1
-#define _FP_NANFRAC_Q		((_FP_QNANBIT_Q << 1) - 1), -1, -1, -1
-#define _FP_NANSIGN_S		0
-#define _FP_NANSIGN_D		0
-#define _FP_NANSIGN_Q		0
-
-#define _FP_KEEPNANFRACP 1
-#define _FP_QNANNEGATEDP 0
-
-#define _FP_CHOOSENAN(fs, wc, R, X, Y, OP)			\
-do {								\
-	if ((_FP_FRAC_HIGH_RAW_##fs(X) & _FP_QNANBIT_##fs)	\
-	  && !(_FP_FRAC_HIGH_RAW_##fs(Y) & _FP_QNANBIT_##fs)) { \
-		R##_s = Y##_s;					\
-		_FP_FRAC_COPY_##wc(R, Y);			\
-	} else {						\
-		R##_s = X##_s;					\
-		_FP_FRAC_COPY_##wc(R, X);			\
-	}							\
-	R##_c = FP_CLS_NAN;					\
-} while (0)
-
-#define __FPU_FPCSR	(current->thread.fpu.fpcsr)
-
-/* Obtain the current rounding mode. */
-#define FP_ROUNDMODE                    \
-({                                      \
-	__FPU_FPCSR & FPCSR_mskRM;      \
-})
-
-#define FP_RND_NEAREST		0
-#define FP_RND_PINF		1
-#define FP_RND_MINF		2
-#define FP_RND_ZERO		3
-
-#define FP_EX_INVALID		FPCSR_mskIVO
-#define FP_EX_DIVZERO		FPCSR_mskDBZ
-#define FP_EX_OVERFLOW		FPCSR_mskOVF
-#define FP_EX_UNDERFLOW		FPCSR_mskUDF
-#define FP_EX_INEXACT		FPCSR_mskIEX
-
-#define SF_CEQ	2
-#define SF_CLT	1
-#define SF_CGT	3
-#define SF_CUN	4
-
-#include <asm/byteorder.h>
-
-#ifdef __BIG_ENDIAN__
-#define __BYTE_ORDER __BIG_ENDIAN
-#define __LITTLE_ENDIAN 0
-#else
-#define __BYTE_ORDER __LITTLE_ENDIAN
-#define __BIG_ENDIAN 0
-#endif
-
-#define abort() do { } while (0)
-#define umul_ppmm(w1, w0, u, v)						\
-do {									\
-	UWtype __x0, __x1, __x2, __x3;                                  \
-	UHWtype __ul, __vl, __uh, __vh;                                 \
-									\
-	__ul = __ll_lowpart(u);						\
-	__uh = __ll_highpart(u);					\
-	__vl = __ll_lowpart(v);						\
-	__vh = __ll_highpart(v);					\
-									\
-	__x0 = (UWtype) __ul * __vl;                                    \
-	__x1 = (UWtype) __ul * __vh;                                    \
-	__x2 = (UWtype) __uh * __vl;                                    \
-	__x3 = (UWtype) __uh * __vh;                                    \
-									\
-	__x1 += __ll_highpart(__x0);					\
-	__x1 += __x2;							\
-	if (__x1 < __x2)						\
-		__x3 += __ll_B;						\
-									\
-	(w1) = __x3 + __ll_highpart(__x1);				\
-	(w0) = __ll_lowpart(__x1) * __ll_B + __ll_lowpart(__x0);	\
-} while (0)
-
-#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
-do { \
-	UWtype __x; \
-	__x = (al) + (bl); \
-	(sh) = (ah) + (bh) + (__x < (al)); \
-	(sl) = __x; \
-} while (0)
-
-#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
-do { \
-	UWtype __x; \
-	__x = (al) - (bl); \
-	(sh) = (ah) - (bh) - (__x > (al)); \
-	(sl) = __x; \
-} while (0)
-
-#define udiv_qrnnd(q, r, n1, n0, d)				\
-do {								\
-	UWtype __d1, __d0, __q1, __q0, __r1, __r0, __m;		\
-	__d1 = __ll_highpart(d);				\
-	__d0 = __ll_lowpart(d);					\
-								\
-	__r1 = (n1) % __d1;					\
-	__q1 = (n1) / __d1;					\
-	__m = (UWtype) __q1 * __d0;				\
-	__r1 = __r1 * __ll_B | __ll_highpart(n0);		\
-	if (__r1 < __m)	{					\
-		__q1--, __r1 += (d);				\
-		if (__r1 >= (d))				\
-			if (__r1 < __m)				\
-				__q1--, __r1 += (d);		\
-	}							\
-	__r1 -= __m;						\
-	__r0 = __r1 % __d1;					\
-	__q0 = __r1 / __d1;					\
-	__m = (UWtype) __q0 * __d0;				\
-	__r0 = __r0 * __ll_B | __ll_lowpart(n0);		\
-	if (__r0 < __m)	{					\
-		__q0--, __r0 += (d);				\
-		if (__r0 >= (d))				\
-			if (__r0 < __m)				\
-				__q0--, __r0 += (d);		\
-	}							\
-	__r0 -= __m;						\
-	(q) = (UWtype) __q1 * __ll_B | __q0;			\
-	(r) = __r0;						\
-} while (0)
diff --git a/arch/nds32/include/asm/shmparam.h b/arch/nds32/include/asm/shmparam.h
deleted file mode 100644
index 3aeee946973d..000000000000
--- a/arch/nds32/include/asm/shmparam.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#ifndef _ASMNDS32_SHMPARAM_H
-#define _ASMNDS32_SHMPARAM_H
-
-/*
- * This should be the size of the virtually indexed cache/ways,
- * whichever is greater since the cache aliases every size/ways
- * bytes.
- */
-#define	SHMLBA	(4 * SZ_8K)	/* attach addr a multiple of this */
-
-/*
- * Enforce SHMLBA in shmat
- */
-#define __ARCH_FORCE_SHMLBA
-
-#endif /* _ASMNDS32_SHMPARAM_H */
diff --git a/arch/nds32/include/asm/stacktrace.h b/arch/nds32/include/asm/stacktrace.h
deleted file mode 100644
index 6bf7c777bda4..000000000000
--- a/arch/nds32/include/asm/stacktrace.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* Copyright (C) 2008-2018 Andes Technology Corporation */
-
-#ifndef __ASM_STACKTRACE_H
-#define __ASM_STACKTRACE_H
-
-/* Kernel callchain */
-struct stackframe {
-	unsigned long fp;
-	unsigned long sp;
-	unsigned long lp;
-};
-
-/*
- * struct frame_tail: User callchain
- * IMPORTANT:
- * This struct is used for call-stack walking,
- * the order and types matters.
- * Do not use array, it only stores sizeof(pointer)
- *
- * The details can refer to arch/arm/kernel/perf_event.c
- */
-struct frame_tail {
-	unsigned long stack_fp;
-	unsigned long stack_lp;
-};
-
-/* For User callchain with optimize for size */
-struct frame_tail_opt_size {
-	unsigned long stack_r6;
-	unsigned long stack_fp;
-	unsigned long stack_gp;
-	unsigned long stack_lp;
-};
-
-extern void
-get_real_ret_addr(unsigned long *addr, struct task_struct *tsk, int *graph);
-
-#endif /* __ASM_STACKTRACE_H */
diff --git a/arch/nds32/include/asm/string.h b/arch/nds32/include/asm/string.h
deleted file mode 100644
index cae8fe16de98..000000000000
--- a/arch/nds32/include/asm/string.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#ifndef __ASM_NDS32_STRING_H
-#define __ASM_NDS32_STRING_H
-
-#define __HAVE_ARCH_MEMCPY
-extern void *memcpy(void *, const void *, __kernel_size_t);
-
-#define __HAVE_ARCH_MEMMOVE
-extern void *memmove(void *, const void *, __kernel_size_t);
-
-#define __HAVE_ARCH_MEMSET
-extern void *memset(void *, int, __kernel_size_t);
-
-extern void *memzero(void *ptr, __kernel_size_t n);
-#endif
diff --git a/arch/nds32/include/asm/suspend.h b/arch/nds32/include/asm/suspend.h
deleted file mode 100644
index 6ed2418af1ac..000000000000
--- a/arch/nds32/include/asm/suspend.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-// Copyright (C) 2008-2017 Andes Technology Corporation
-
-#ifndef __ASM_NDS32_SUSPEND_H
-#define __ASM_NDS32_SUSPEND_H
-
-extern void suspend2ram(void);
-extern void cpu_resume(void);
-extern unsigned long wake_mask;
-
-#endif
diff --git a/arch/nds32/include/asm/swab.h b/arch/nds32/include/asm/swab.h
deleted file mode 100644
index 362a466f2976..000000000000
--- a/arch/nds32/include/asm/swab.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#ifndef __NDS32_SWAB_H__
-#define __NDS32_SWAB_H__
-
-#include <linux/types.h>
-#include <linux/compiler.h>
-
-static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 x)
-{
-	__asm__("wsbh   %0, %0\n\t"	/* word swap byte within halfword */
-		"rotri  %0, %0, #16\n"
-		:"=r"(x)
-		:"0"(x));
-	return x;
-}
-
-static __inline__ __attribute_const__ __u16 ___arch__swab16(__u16 x)
-{
-	__asm__("wsbh   %0, %0\n"	/* word swap byte within halfword */
-		:"=r"(x)
-		:"0"(x));
-	return x;
-}
-
-#define __arch_swab32(x) ___arch__swab32(x)
-#define __arch_swab16(x) ___arch__swab16(x)
-
-#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
-#define __BYTEORDER_HAS_U64__
-#define __SWAB_64_THRU_32__
-#endif
-
-#endif /* __NDS32_SWAB_H__ */
diff --git a/arch/nds32/include/asm/syscall.h b/arch/nds32/include/asm/syscall.h
deleted file mode 100644
index 90aa56c94af1..000000000000
--- a/arch/nds32/include/asm/syscall.h
+++ /dev/null
@@ -1,142 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-// Copyright (C) 2008-2009 Red Hat, Inc.  All rights reserved.
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#ifndef _ASM_NDS32_SYSCALL_H
-#define _ASM_NDS32_SYSCALL_H	1
-
-#include <uapi/linux/audit.h>
-#include <linux/err.h>
-struct task_struct;
-struct pt_regs;
-
-/**
- * syscall_get_nr - find what system call a task is executing
- * @task:	task of interest, must be blocked
- * @regs:	task_pt_regs() of @task
- *
- * If @task is executing a system call or is at system call
- * tracing about to attempt one, returns the system call number.
- * If @task is not executing a system call, i.e. it's blocked
- * inside the kernel for a fault or signal, returns -1.
- *
- * Note this returns int even on 64-bit machines.  Only 32 bits of
- * system call number can be meaningful.  If the actual arch value
- * is 64 bits, this truncates to 32 bits so 0xffffffff means -1.
- *
- * It's only valid to call this when @task is known to be blocked.
- */
-static inline int
-syscall_get_nr(struct task_struct *task, struct pt_regs *regs)
-{
-	return regs->syscallno;
-}
-
-/**
- * syscall_rollback - roll back registers after an aborted system call
- * @task:	task of interest, must be in system call exit tracing
- * @regs:	task_pt_regs() of @task
- *
- * It's only valid to call this when @task is stopped for system
- * call exit tracing (due to TIF_SYSCALL_TRACE or TIF_SYSCALL_AUDIT),
- * after tracehook_report_syscall_entry() returned nonzero to prevent
- * the system call from taking place.
- *
- * This rolls back the register state in @regs so it's as if the
- * system call instruction was a no-op.  The registers containing
- * the system call number and arguments are as they were before the
- * system call instruction.  This may not be the same as what the
- * register state looked like at system call entry tracing.
- */
-static inline void
-syscall_rollback(struct task_struct *task, struct pt_regs *regs)
-{
-	regs->uregs[0] = regs->orig_r0;
-}
-
-/**
- * syscall_get_error - check result of traced system call
- * @task:	task of interest, must be blocked
- * @regs:	task_pt_regs() of @task
- *
- * Returns 0 if the system call succeeded, or -ERRORCODE if it failed.
- *
- * It's only valid to call this when @task is stopped for tracing on exit
- * from a system call, due to %TIF_SYSCALL_TRACE or %TIF_SYSCALL_AUDIT.
- */
-static inline long
-syscall_get_error(struct task_struct *task, struct pt_regs *regs)
-{
-	unsigned long error = regs->uregs[0];
-	return IS_ERR_VALUE(error) ? error : 0;
-}
-
-/**
- * syscall_get_return_value - get the return value of a traced system call
- * @task:	task of interest, must be blocked
- * @regs:	task_pt_regs() of @task
- *
- * Returns the return value of the successful system call.
- * This value is meaningless if syscall_get_error() returned nonzero.
- *
- * It's only valid to call this when @task is stopped for tracing on exit
- * from a system call, due to %TIF_SYSCALL_TRACE or %TIF_SYSCALL_AUDIT.
- */
-static inline long
-syscall_get_return_value(struct task_struct *task, struct pt_regs *regs)
-{
-	return regs->uregs[0];
-}
-
-/**
- * syscall_set_return_value - change the return value of a traced system call
- * @task:	task of interest, must be blocked
- * @regs:	task_pt_regs() of @task
- * @error:	negative error code, or zero to indicate success
- * @val:	user return value if @error is zero
- *
- * This changes the results of the system call that user mode will see.
- * If @error is zero, the user sees a successful system call with a
- * return value of @val.  If @error is nonzero, it's a negated errno
- * code; the user sees a failed system call with this errno code.
- *
- * It's only valid to call this when @task is stopped for tracing on exit
- * from a system call, due to %TIF_SYSCALL_TRACE or %TIF_SYSCALL_AUDIT.
- */
-static inline void
-syscall_set_return_value(struct task_struct *task, struct pt_regs *regs,
-			 int error, long val)
-{
-	regs->uregs[0] = (long)error ? error : val;
-}
-
-/**
- * syscall_get_arguments - extract system call parameter values
- * @task:	task of interest, must be blocked
- * @regs:	task_pt_regs() of @task
- * @args:	array filled with argument values
- *
- * Fetches 6 arguments to the system call (from 0 through 5). The first
- * argument is stored in @args[0], and so on.
- *
- * It's only valid to call this when @task is stopped for tracing on
- * entry to a system call, due to %TIF_SYSCALL_TRACE or %TIF_SYSCALL_AUDIT.
- */
-#define SYSCALL_MAX_ARGS 6
-static inline void
-syscall_get_arguments(struct task_struct *task, struct pt_regs *regs,
-		      unsigned long *args)
-{
-	args[0] = regs->orig_r0;
-	args++;
-	memcpy(args, &regs->uregs[0] + 1, 5 * sizeof(args[0]));
-}
-
-static inline int
-syscall_get_arch(struct task_struct *task)
-{
-	return IS_ENABLED(CONFIG_CPU_BIG_ENDIAN)
-		? AUDIT_ARCH_NDS32BE : AUDIT_ARCH_NDS32;
-}
-
-#endif /* _ASM_NDS32_SYSCALL_H */
diff --git a/arch/nds32/include/asm/syscalls.h b/arch/nds32/include/asm/syscalls.h
deleted file mode 100644
index 4e7216082a67..000000000000
--- a/arch/nds32/include/asm/syscalls.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#ifndef __ASM_NDS32_SYSCALLS_H
-#define __ASM_NDS32_SYSCALLS_H
-
-asmlinkage long sys_cacheflush(unsigned long addr, unsigned long len, unsigned int op);
-asmlinkage long sys_fadvise64_64_wrapper(int fd, int advice, loff_t offset, loff_t len);
-asmlinkage long sys_rt_sigreturn_wrapper(void);
-asmlinkage long sys_fp_udfiex_crtl(int cmd, int act);
-
-#include <asm-generic/syscalls.h>
-
-#endif /* __ASM_NDS32_SYSCALLS_H */
diff --git a/arch/nds32/include/asm/thread_info.h b/arch/nds32/include/asm/thread_info.h
deleted file mode 100644
index d3967ad184f0..000000000000
--- a/arch/nds32/include/asm/thread_info.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#ifndef __ASM_NDS32_THREAD_INFO_H
-#define __ASM_NDS32_THREAD_INFO_H
-
-#ifdef __KERNEL__
-
-#define THREAD_SIZE_ORDER 	(1)
-#define THREAD_SIZE		(PAGE_SIZE << THREAD_SIZE_ORDER)
-
-#ifndef __ASSEMBLY__
-
-struct task_struct;
-
-#include <asm/ptrace.h>
-#include <asm/types.h>
-
-typedef unsigned long mm_segment_t;
-
-/*
- * low level task data that entry.S needs immediate access to.
- * __switch_to() assumes cpu_context follows immediately after cpu_domain.
- */
-struct thread_info {
-	unsigned long flags;	/* low level flags */
-	__s32 preempt_count;	/* 0 => preemptable, <0 => bug */
-	mm_segment_t addr_limit;	/* address limit */
-};
-#define INIT_THREAD_INFO(tsk)						\
-{									\
-	.preempt_count	= INIT_PREEMPT_COUNT,				\
-	.addr_limit	= KERNEL_DS,					\
-}
-#define thread_saved_pc(tsk) ((unsigned long)(tsk->thread.cpu_context.pc))
-#define thread_saved_fp(tsk) ((unsigned long)(tsk->thread.cpu_context.fp))
-#endif
-
-/*
- * thread information flags:
- *  TIF_SYSCALL_TRACE	- syscall trace active
- *  TIF_SIGPENDING	- signal pending
- *  TIF_NEED_RESCHED	- rescheduling necessary
- *  TIF_NOTIFY_RESUME	- callback before returning to user
- *  TIF_POLLING_NRFLAG	- true if poll_idle() is polling TIF_NEED_RESCHED
- */
-#define TIF_SIGPENDING		1
-#define TIF_NEED_RESCHED	2
-#define TIF_SINGLESTEP		3
-#define TIF_NOTIFY_RESUME	4	/* callback before returning to user */
-#define TIF_NOTIFY_SIGNAL	5	/* signal notifications exist */
-#define TIF_SYSCALL_TRACE	8
-#define TIF_POLLING_NRFLAG	17
-#define TIF_MEMDIE		18
-#define TIF_FREEZE		19
-#define TIF_RESTORE_SIGMASK	20
-
-#define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
-#define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
-#define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
-#define _TIF_NOTIFY_SIGNAL	(1 << TIF_NOTIFY_SIGNAL)
-#define _TIF_SINGLESTEP		(1 << TIF_SINGLESTEP)
-#define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
-#define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
-#define _TIF_FREEZE		(1 << TIF_FREEZE)
-#define _TIF_RESTORE_SIGMASK	(1 << TIF_RESTORE_SIGMASK)
-
-/*
- * Change these and you break ASM code in entry-common.S
- */
-#define _TIF_WORK_MASK		0x000000ff
-#define _TIF_WORK_SYSCALL_ENTRY (_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP)
-#define _TIF_WORK_SYSCALL_LEAVE (_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP)
-
-#endif /* __KERNEL__ */
-#endif /* __ASM_NDS32_THREAD_INFO_H */
diff --git a/arch/nds32/include/asm/tlb.h b/arch/nds32/include/asm/tlb.h
deleted file mode 100644
index 672603804a3b..000000000000
--- a/arch/nds32/include/asm/tlb.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#ifndef __ASMNDS32_TLB_H
-#define __ASMNDS32_TLB_H
-
-#include <asm-generic/tlb.h>
-
-#define __pte_free_tlb(tlb, pte, addr)	pte_free((tlb)->mm, pte)
-
-#endif
diff --git a/arch/nds32/include/asm/tlbflush.h b/arch/nds32/include/asm/tlbflush.h
deleted file mode 100644
index 97155366ea01..000000000000
--- a/arch/nds32/include/asm/tlbflush.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#ifndef _ASMNDS32_TLBFLUSH_H
-#define _ASMNDS32_TLBFLUSH_H
-
-#include <linux/spinlock.h>
-#include <linux/mm.h>
-#include <nds32_intrinsic.h>
-
-static inline void local_flush_tlb_all(void)
-{
-	__nds32__tlbop_flua();
-	__nds32__isb();
-}
-
-static inline void local_flush_tlb_mm(struct mm_struct *mm)
-{
-	__nds32__tlbop_flua();
-	__nds32__isb();
-}
-
-static inline void local_flush_tlb_kernel_range(unsigned long start,
-						unsigned long end)
-{
-	while (start < end) {
-		__nds32__tlbop_inv(start);
-		__nds32__isb();
-		start += PAGE_SIZE;
-	}
-}
-
-void local_flush_tlb_range(struct vm_area_struct *vma,
-			   unsigned long start, unsigned long end);
-void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long addr);
-
-#define flush_tlb_all		local_flush_tlb_all
-#define flush_tlb_mm		local_flush_tlb_mm
-#define flush_tlb_range		local_flush_tlb_range
-#define flush_tlb_page		local_flush_tlb_page
-#define flush_tlb_kernel_range	local_flush_tlb_kernel_range
-
-void update_mmu_cache(struct vm_area_struct *vma,
-		      unsigned long address, pte_t * pte);
-
-#endif
diff --git a/arch/nds32/include/asm/uaccess.h b/arch/nds32/include/asm/uaccess.h
deleted file mode 100644
index d4cbf069dc22..000000000000
--- a/arch/nds32/include/asm/uaccess.h
+++ /dev/null
@@ -1,286 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#ifndef _ASMANDES_UACCESS_H
-#define _ASMANDES_UACCESS_H
-
-/*
- * User space memory access functions
- */
-#include <linux/sched.h>
-#include <asm/errno.h>
-#include <asm/memory.h>
-#include <asm/types.h>
-
-#define __asmeq(x, y)  ".ifnc " x "," y " ; .err ; .endif\n\t"
-
-/*
- * The exception table consists of pairs of addresses: the first is the
- * address of an instruction that is allowed to fault, and the second is
- * the address at which the program should continue.  No registers are
- * modified, so it is entirely up to the continuation code to figure out
- * what to do.
- *
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path.  This means when everything is well,
- * we don't even have to jump over them.  Further, they do not intrude
- * on our cache or tlb entries.
- */
-
-struct exception_table_entry {
-	unsigned long insn, fixup;
-};
-
-extern int fixup_exception(struct pt_regs *regs);
-
-#define KERNEL_DS 	((mm_segment_t) { ~0UL })
-#define USER_DS		((mm_segment_t) {TASK_SIZE - 1})
-
-#define get_fs()	(current_thread_info()->addr_limit)
-#define user_addr_max	get_fs
-
-static inline void set_fs(mm_segment_t fs)
-{
-	current_thread_info()->addr_limit = fs;
-}
-
-#define uaccess_kernel()	(get_fs() == KERNEL_DS)
-
-#define __range_ok(addr, size) (size <= get_fs() && addr <= (get_fs() -size))
-
-#define access_ok(addr, size)	\
-	__range_ok((unsigned long)addr, (unsigned long)size)
-/*
- * Single-value transfer routines.  They automatically use the right
- * size if we just have the right pointer type.  Note that the functions
- * which read from user space (*get_*) need to take care not to leak
- * kernel data even if the calling code is buggy and fails to check
- * the return value.  This means zeroing out the destination variable
- * or buffer on error.  Normally this is done out of line by the
- * fixup code, but there are a few places where it intrudes on the
- * main code path.  When we only write to user space, there is no
- * problem.
- *
- * The "__xxx" versions of the user access functions do not verify the
- * address space - it must have been done previously with a separate
- * "access_ok()" call.
- *
- * The "xxx_error" versions set the third argument to EFAULT if an
- * error occurs, and leave it unchanged on success.  Note that these
- * versions are void (ie, don't return a value as such).
- */
-
-#define get_user	__get_user					\
-
-#define __get_user(x, ptr)						\
-({									\
-	long __gu_err = 0;						\
-	__get_user_check((x), (ptr), __gu_err);				\
-	__gu_err;							\
-})
-
-#define __get_user_error(x, ptr, err)					\
-({									\
-	__get_user_check((x), (ptr), (err));				\
-	(void)0;							\
-})
-
-#define __get_user_check(x, ptr, err)					\
-({									\
-	const __typeof__(*(ptr)) __user *__p = (ptr);			\
-	might_fault();							\
-	if (access_ok(__p, sizeof(*__p))) {		\
-		__get_user_err((x), __p, (err));			\
-	} else {							\
-		(x) = 0; (err) = -EFAULT;				\
-	}								\
-})
-
-#define __get_user_err(x, ptr, err)					\
-do {									\
-	unsigned long __gu_val;						\
-	__chk_user_ptr(ptr);						\
-	switch (sizeof(*(ptr))) {					\
-	case 1:								\
-		__get_user_asm("lbi", __gu_val, (ptr), (err));		\
-		break;							\
-	case 2:								\
-		__get_user_asm("lhi", __gu_val, (ptr), (err));		\
-		break;							\
-	case 4:								\
-		__get_user_asm("lwi", __gu_val, (ptr), (err));		\
-		break;							\
-	case 8:								\
-		__get_user_asm_dword(__gu_val, (ptr), (err));		\
-		break;							\
-	default:							\
-		BUILD_BUG(); 						\
-		break;							\
-	}								\
-	(x) = (__force __typeof__(*(ptr)))__gu_val;			\
-} while (0)
-
-#define __get_user_asm(inst, x, addr, err)				\
-	__asm__ __volatile__ (						\
-		"1:	"inst"	%1,[%2]\n"				\
-		"2:\n"							\
-		"	.section .fixup,\"ax\"\n"			\
-		"	.align	2\n"					\
-		"3:	move %0, %3\n"					\
-		"	move %1, #0\n"					\
-		"	b	2b\n"					\
-		"	.previous\n"					\
-		"	.section __ex_table,\"a\"\n"			\
-		"	.align	3\n"					\
-		"	.long	1b, 3b\n"				\
-		"	.previous"					\
-		: "+r" (err), "=&r" (x)					\
-		: "r" (addr), "i" (-EFAULT)				\
-		: "cc")
-
-#ifdef __NDS32_EB__
-#define __gu_reg_oper0 "%H1"
-#define __gu_reg_oper1 "%L1"
-#else
-#define __gu_reg_oper0 "%L1"
-#define __gu_reg_oper1 "%H1"
-#endif
-
-#define __get_user_asm_dword(x, addr, err) 				\
-	__asm__ __volatile__ (						\
-		"\n1:\tlwi " __gu_reg_oper0 ",[%2]\n"			\
-		"\n2:\tlwi " __gu_reg_oper1 ",[%2+4]\n"			\
-		"3:\n"							\
-		"	.section .fixup,\"ax\"\n"			\
-		"	.align	2\n"					\
-		"4:	move	%0, %3\n"				\
-		"	b	3b\n"					\
-		"	.previous\n"					\
-		"	.section __ex_table,\"a\"\n"			\
-		"	.align	3\n"					\
-		"	.long	1b, 4b\n"				\
-		"	.long	2b, 4b\n"				\
-		"	.previous"					\
-		: "+r"(err), "=&r"(x)					\
-		: "r"(addr), "i"(-EFAULT)				\
-		: "cc")
-
-#define put_user	__put_user					\
-
-#define __put_user(x, ptr)						\
-({									\
-	long __pu_err = 0;						\
-	__put_user_err((x), (ptr), __pu_err);				\
-	__pu_err;							\
-})
-
-#define __put_user_error(x, ptr, err)					\
-({									\
-	__put_user_err((x), (ptr), (err));				\
-	(void)0;							\
-})
-
-#define __put_user_check(x, ptr, err)					\
-({									\
-	__typeof__(*(ptr)) __user *__p = (ptr);				\
-	might_fault();							\
-	if (access_ok(__p, sizeof(*__p))) {		\
-		__put_user_err((x), __p, (err));			\
-	} else	{							\
-		(err) = -EFAULT;					\
-	}								\
-})
-
-#define __put_user_err(x, ptr, err)					\
-do {									\
-	__typeof__(*(ptr)) __pu_val = (x);				\
-	__chk_user_ptr(ptr);						\
-	switch (sizeof(*(ptr))) {					\
-	case 1:								\
-		__put_user_asm("sbi", __pu_val, (ptr), (err));		\
-		break;							\
-	case 2: 							\
-		__put_user_asm("shi", __pu_val, (ptr), (err));		\
-		break;							\
-	case 4: 							\
-		__put_user_asm("swi", __pu_val, (ptr), (err));		\
-		break;							\
-	case 8:								\
-		__put_user_asm_dword(__pu_val, (ptr), (err));		\
-		break;							\
-	default:							\
-		BUILD_BUG(); 						\
-		break;							\
-	}								\
-} while (0)
-
-#define __put_user_asm(inst, x, addr, err)				\
-	__asm__ __volatile__ (						\
-		"1:	"inst"	%1,[%2]\n"				\
-		"2:\n"							\
-		"	.section .fixup,\"ax\"\n"			\
-		"	.align	2\n"					\
-		"3:	move	%0, %3\n"				\
-		"	b	2b\n"					\
-		"	.previous\n"					\
-		"	.section __ex_table,\"a\"\n"			\
-		"	.align	3\n"					\
-		"	.long	1b, 3b\n"				\
-		"	.previous"					\
-		: "+r" (err)						\
-		: "r" (x), "r" (addr), "i" (-EFAULT)			\
-		: "cc")
-
-#ifdef __NDS32_EB__
-#define __pu_reg_oper0 "%H2"
-#define __pu_reg_oper1 "%L2"
-#else
-#define __pu_reg_oper0 "%L2"
-#define __pu_reg_oper1 "%H2"
-#endif
-
-#define __put_user_asm_dword(x, addr, err) 				\
-	__asm__ __volatile__ (						\
-		"\n1:\tswi " __pu_reg_oper0 ",[%1]\n"			\
-		"\n2:\tswi " __pu_reg_oper1 ",[%1+4]\n"			\
-		"3:\n"							\
-		"	.section .fixup,\"ax\"\n"			\
-		"	.align	2\n"					\
-		"4:	move	%0, %3\n"				\
-		"	b	3b\n"					\
-		"	.previous\n"					\
-		"	.section __ex_table,\"a\"\n"			\
-		"	.align	3\n"					\
-		"	.long	1b, 4b\n"				\
-		"	.long	2b, 4b\n"				\
-		"	.previous"					\
-		: "+r"(err)						\
-		: "r"(addr), "r"(x), "i"(-EFAULT)			\
-		: "cc")
-
-extern unsigned long __arch_clear_user(void __user * addr, unsigned long n);
-extern long strncpy_from_user(char *dest, const char __user * src, long count);
-extern __must_check long strnlen_user(const char __user * str, long n);
-extern unsigned long __arch_copy_from_user(void *to, const void __user * from,
-                                           unsigned long n);
-extern unsigned long __arch_copy_to_user(void __user * to, const void *from,
-                                         unsigned long n);
-
-#define raw_copy_from_user __arch_copy_from_user
-#define raw_copy_to_user __arch_copy_to_user
-
-#define INLINE_COPY_FROM_USER
-#define INLINE_COPY_TO_USER
-static inline unsigned long clear_user(void __user * to, unsigned long n)
-{
-	if (access_ok(to, n))
-		n = __arch_clear_user(to, n);
-	return n;
-}
-
-static inline unsigned long __clear_user(void __user * to, unsigned long n)
-{
-	return __arch_clear_user(to, n);
-}
-
-#endif /* _ASMNDS32_UACCESS_H */
diff --git a/arch/nds32/include/asm/unistd.h b/arch/nds32/include/asm/unistd.h
deleted file mode 100644
index bf5e2d440913..000000000000
--- a/arch/nds32/include/asm/unistd.h
+++ /dev/null
@@ -1,6 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#define __ARCH_WANT_SYS_CLONE
-
-#include <uapi/asm/unistd.h>
diff --git a/arch/nds32/include/asm/vdso.h b/arch/nds32/include/asm/vdso.h
deleted file mode 100644
index 89b113ffc3dc..000000000000
--- a/arch/nds32/include/asm/vdso.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (C) 2005-2017 Andes Technology Corporation
- */
-
-#ifndef __ASM_VDSO_H
-#define __ASM_VDSO_H
-
-#ifdef __KERNEL__
-
-#ifndef __ASSEMBLY__
-
-#include <generated/vdso-offsets.h>
-
-#define VDSO_SYMBOL(base, name)						   \
-({									   \
-	(unsigned long)(vdso_offset_##name + (unsigned long)(base)); \
-})
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* __KERNEL__ */
-
-#endif /* __ASM_VDSO_H */
diff --git a/arch/nds32/include/asm/vdso_datapage.h b/arch/nds32/include/asm/vdso_datapage.h
deleted file mode 100644
index 74c68802021e..000000000000
--- a/arch/nds32/include/asm/vdso_datapage.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-// Copyright (C) 2012 ARM Limited
-// Copyright (C) 2005-2017 Andes Technology Corporation
-#ifndef __ASM_VDSO_DATAPAGE_H
-#define __ASM_VDSO_DATAPAGE_H
-
-#ifdef __KERNEL__
-
-#ifndef __ASSEMBLY__
-
-struct vdso_data {
-	bool cycle_count_down;	/* timer cyclye counter is decrease with time */
-	u32 cycle_count_offset;	/* offset of timer cycle counter register */
-	u32 seq_count;		/* sequence count - odd during updates */
-	u32 xtime_coarse_sec;	/* coarse time */
-	u32 xtime_coarse_nsec;
-
-	u32 wtm_clock_sec;	/* wall to monotonic offset */
-	u32 wtm_clock_nsec;
-	u32 xtime_clock_sec;	/* CLOCK_REALTIME - seconds */
-	u32 cs_mult;		/* clocksource multiplier */
-	u32 cs_shift;		/* Cycle to nanosecond divisor (power of two) */
-	u32 hrtimer_res;	/* hrtimer resolution */
-
-	u64 cs_cycle_last;	/* last cycle value */
-	u64 cs_mask;		/* clocksource mask */
-
-	u64 xtime_clock_nsec;	/* CLOCK_REALTIME sub-ns base */
-	u32 tz_minuteswest;	/* timezone info for gettimeofday(2) */
-	u32 tz_dsttime;
-};
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* __KERNEL__ */
-
-#endif /* __ASM_VDSO_DATAPAGE_H */
diff --git a/arch/nds32/include/asm/vdso_timer_info.h b/arch/nds32/include/asm/vdso_timer_info.h
deleted file mode 100644
index 328439ce37db..000000000000
--- a/arch/nds32/include/asm/vdso_timer_info.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-extern struct timer_info_t timer_info;
-#define EMPTY_VALUE ~(0UL)
-#define EMPTY_TIMER_MAPPING EMPTY_VALUE
-#define EMPTY_REG_OFFSET EMPTY_VALUE
-
-struct timer_info_t
-{
-	bool cycle_count_down;
-	unsigned long mapping_base;
-	unsigned long cycle_count_reg_offset;
-};
diff --git a/arch/nds32/include/asm/vermagic.h b/arch/nds32/include/asm/vermagic.h
deleted file mode 100644
index f772e7ba33f1..000000000000
--- a/arch/nds32/include/asm/vermagic.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#ifndef _ASM_VERMAGIC_H
-#define _ASM_VERMAGIC_H
-
-#define MODULE_ARCH_VERMAGIC	"NDS32v3"
-
-#endif /* _ASM_VERMAGIC_H */
diff --git a/arch/nds32/include/asm/vmalloc.h b/arch/nds32/include/asm/vmalloc.h
deleted file mode 100644
index caeed3898419..000000000000
--- a/arch/nds32/include/asm/vmalloc.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef _ASM_NDS32_VMALLOC_H
-#define _ASM_NDS32_VMALLOC_H
-
-#endif /* _ASM_NDS32_VMALLOC_H */
diff --git a/arch/nds32/include/uapi/asm/Kbuild b/arch/nds32/include/uapi/asm/Kbuild
deleted file mode 100644
index e78470141932..000000000000
--- a/arch/nds32/include/uapi/asm/Kbuild
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-generic-y += ucontext.h
diff --git a/arch/nds32/include/uapi/asm/auxvec.h b/arch/nds32/include/uapi/asm/auxvec.h
deleted file mode 100644
index bc0b92ab8c15..000000000000
--- a/arch/nds32/include/uapi/asm/auxvec.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#ifndef __ASM_AUXVEC_H
-#define __ASM_AUXVEC_H
-
-/*
- * This entry gives some information about the FPU initialization
- * performed by the kernel.
- */
-#define AT_FPUCW	18	/* Used FPU control word.  */
-
-
-/* VDSO location */
-#define AT_SYSINFO_EHDR	33
-
-#define AT_VECTOR_SIZE_ARCH 1
-
-#endif
diff --git a/arch/nds32/include/uapi/asm/byteorder.h b/arch/nds32/include/uapi/asm/byteorder.h
deleted file mode 100644
index c264ef12c49c..000000000000
--- a/arch/nds32/include/uapi/asm/byteorder.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#ifndef __NDS32_BYTEORDER_H__
-#define __NDS32_BYTEORDER_H__
-
-#ifdef __NDS32_EB__
-#include <linux/byteorder/big_endian.h>
-#else
-#include <linux/byteorder/little_endian.h>
-#endif
-
-#endif /* __NDS32_BYTEORDER_H__ */
diff --git a/arch/nds32/include/uapi/asm/cachectl.h b/arch/nds32/include/uapi/asm/cachectl.h
deleted file mode 100644
index 31b9b439d819..000000000000
--- a/arch/nds32/include/uapi/asm/cachectl.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-// Copyright (C) 1994, 1995, 1996 by Ralf Baechle
-// Copyright (C) 2005-2017 Andes Technology Corporation
-#ifndef	_ASM_CACHECTL
-#define	_ASM_CACHECTL
-
-/*
- * Options for cacheflush system call
- */
-#define	ICACHE	0		/* flush instruction cache        */
-#define	DCACHE	1		/* writeback and flush data cache */
-#define	BCACHE	2		/* flush instruction cache + writeback and flush data cache */
-
-#endif /* _ASM_CACHECTL */
diff --git a/arch/nds32/include/uapi/asm/fp_udfiex_crtl.h b/arch/nds32/include/uapi/asm/fp_udfiex_crtl.h
deleted file mode 100644
index f17396db16ec..000000000000
--- a/arch/nds32/include/uapi/asm/fp_udfiex_crtl.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-/* Copyright (C) 2005-2019 Andes Technology Corporation */
-#ifndef	_FP_UDF_IEX_CRTL_H
-#define	_FP_UDF_IEX_CRTL_H
-
-/*
- * The cmd list of sys_fp_udfiex_crtl()
- */
-/* Disable UDF or IEX trap based on the content of parameter act */
-#define DISABLE_UDF_IEX_TRAP	0
-/* Enable UDF or IEX trap based on the content of parameter act */
-#define ENABLE_UDF_IEX_TRAP	1
-/* Get current status of UDF and IEX trap */
-#define GET_UDF_IEX_TRAP	2
-
-#endif /* _FP_UDF_IEX_CRTL_H */
diff --git a/arch/nds32/include/uapi/asm/param.h b/arch/nds32/include/uapi/asm/param.h
deleted file mode 100644
index 48d00328d328..000000000000
--- a/arch/nds32/include/uapi/asm/param.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#ifndef __ASM_NDS32_PARAM_H
-#define __ASM_NDS32_PARAM_H
-
-#define EXEC_PAGESIZE	8192
-
-#include <asm-generic/param.h>
-
-#endif /* __ASM_NDS32_PARAM_H */
diff --git a/arch/nds32/include/uapi/asm/ptrace.h b/arch/nds32/include/uapi/asm/ptrace.h
deleted file mode 100644
index d76217c7c010..000000000000
--- a/arch/nds32/include/uapi/asm/ptrace.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#ifndef __UAPI_ASM_NDS32_PTRACE_H
-#define __UAPI_ASM_NDS32_PTRACE_H
-
-#ifndef __ASSEMBLY__
-
-/*
- * User structures for general purpose register.
- */
-struct user_pt_regs {
-	long uregs[26];
-	long fp;
-	long gp;
-	long lp;
-	long sp;
-	long ipc;
-	long lb;
-	long le;
-	long lc;
-	long syscallno;
-};
-#endif
-#endif
diff --git a/arch/nds32/include/uapi/asm/sigcontext.h b/arch/nds32/include/uapi/asm/sigcontext.h
deleted file mode 100644
index 6c1e6648878f..000000000000
--- a/arch/nds32/include/uapi/asm/sigcontext.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#ifndef _ASMNDS32_SIGCONTEXT_H
-#define _ASMNDS32_SIGCONTEXT_H
-
-/*
- * Signal context structure - contains all info to do with the state
- * before the signal handler was invoked.  Note: only add new entries
- * to the end of the structure.
- */
-struct fpu_struct {
-	unsigned long long fd_regs[32];
-	unsigned long fpcsr;
-	/*
-	 * When CONFIG_SUPPORT_DENORMAL_ARITHMETIC is defined, kernel prevents
-	 * hardware from treating the denormalized output as an underflow case
-	 * and rounding it to a normal number. Hence kernel enables the UDF and
-	 * IEX trap in the fpcsr register to step in the calculation.
-	 * However, the UDF and IEX trap enable bit in $fpcsr also lose
-	 * their use.
-	 *
-	 * UDF_IEX_trap replaces the feature of UDF and IEX trap enable bit in
-	 * $fpcsr to control the trap of underflow and inexact. The bit filed
-	 * of UDF_IEX_trap is the same as $fpcsr, 10th bit is used to enable UDF
-	 * exception trapping and 11th bit is used to enable IEX exception
-	 * trapping.
-	 *
-	 * UDF_IEX_trap is only modified through fp_udfiex_crtl syscall.
-	 * Therefore, UDF_IEX_trap needn't be saved and restored in each
-	 * context switch.
-	 */
-	unsigned long UDF_IEX_trap;
-};
-
-struct zol_struct {
-	unsigned long nds32_lc;	/* $LC */
-	unsigned long nds32_le;	/* $LE */
-	unsigned long nds32_lb;	/* $LB */
-};
-
-struct sigcontext {
-	unsigned long trap_no;
-	unsigned long error_code;
-	unsigned long oldmask;
-	unsigned long nds32_r0;
-	unsigned long nds32_r1;
-	unsigned long nds32_r2;
-	unsigned long nds32_r3;
-	unsigned long nds32_r4;
-	unsigned long nds32_r5;
-	unsigned long nds32_r6;
-	unsigned long nds32_r7;
-	unsigned long nds32_r8;
-	unsigned long nds32_r9;
-	unsigned long nds32_r10;
-	unsigned long nds32_r11;
-	unsigned long nds32_r12;
-	unsigned long nds32_r13;
-	unsigned long nds32_r14;
-	unsigned long nds32_r15;
-	unsigned long nds32_r16;
-	unsigned long nds32_r17;
-	unsigned long nds32_r18;
-	unsigned long nds32_r19;
-	unsigned long nds32_r20;
-	unsigned long nds32_r21;
-	unsigned long nds32_r22;
-	unsigned long nds32_r23;
-	unsigned long nds32_r24;
-	unsigned long nds32_r25;
-	unsigned long nds32_fp;	/* $r28 */
-	unsigned long nds32_gp;	/* $r29 */
-	unsigned long nds32_lp;	/* $r30 */
-	unsigned long nds32_sp;	/* $r31 */
-	unsigned long nds32_ipc;
-	unsigned long fault_address;
-	unsigned long used_math_flag;
-	/* FPU Registers */
-	struct fpu_struct fpu;
-	struct zol_struct zol;
-};
-
-#endif
diff --git a/arch/nds32/include/uapi/asm/unistd.h b/arch/nds32/include/uapi/asm/unistd.h
deleted file mode 100644
index 410795e280fe..000000000000
--- a/arch/nds32/include/uapi/asm/unistd.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#define __ARCH_WANT_STAT64
-#define __ARCH_WANT_SYNC_FILE_RANGE2
-#define __ARCH_WANT_SET_GET_RLIMIT
-#define __ARCH_WANT_TIME32_SYSCALLS
-
-/* Use the standard ABI for syscalls */
-#include <asm-generic/unistd.h>
-
-/* Additional NDS32 specific syscalls. */
-#define __NR_cacheflush		(__NR_arch_specific_syscall)
-#define __NR_fp_udfiex_crtl	(__NR_arch_specific_syscall + 1)
-__SYSCALL(__NR_cacheflush, sys_cacheflush)
-__SYSCALL(__NR_fp_udfiex_crtl, sys_fp_udfiex_crtl)
diff --git a/arch/nds32/kernel/.gitignore b/arch/nds32/kernel/.gitignore
deleted file mode 100644
index bbb90f92d051..000000000000
--- a/arch/nds32/kernel/.gitignore
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-vmlinux.lds
diff --git a/arch/nds32/kernel/Makefile b/arch/nds32/kernel/Makefile
deleted file mode 100644
index 394df3f6442c..000000000000
--- a/arch/nds32/kernel/Makefile
+++ /dev/null
@@ -1,33 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Makefile for the linux kernel.
-#
-
-CPPFLAGS_vmlinux.lds	:= -DTEXTADDR=$(TEXTADDR)
-AFLAGS_head.o		:= -DTEXTADDR=$(TEXTADDR)
-# Object file lists.
-
-obj-y			:= ex-entry.o ex-exit.o ex-scall.o irq.o \
-			process.o ptrace.o setup.o signal.o \
-			sys_nds32.o time.o traps.o cacheinfo.o \
-			dma.o syscall_table.o vdso.o
-
-obj-$(CONFIG_MODULES)		+= nds32_ksyms.o module.o
-obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
-obj-$(CONFIG_FPU)		+= fpu.o
-obj-$(CONFIG_OF)		+= devtree.o
-obj-$(CONFIG_CACHE_L2)		+= atl2c.o
-obj-$(CONFIG_PERF_EVENTS) += perf_event_cpu.o
-obj-$(CONFIG_PM)		+= pm.o sleep.o
-extra-y := head.o vmlinux.lds
-
-CFLAGS_fpu.o += -mext-fpu-sp -mext-fpu-dp
-
-
-obj-y				+= vdso/
-
-obj-$(CONFIG_FUNCTION_TRACER)   += ftrace.o
-
-ifdef CONFIG_FUNCTION_TRACER
-CFLAGS_REMOVE_ftrace.o = $(CC_FLAGS_FTRACE)
-endif
diff --git a/arch/nds32/kernel/asm-offsets.c b/arch/nds32/kernel/asm-offsets.c
deleted file mode 100644
index 3541d5981de7..000000000000
--- a/arch/nds32/kernel/asm-offsets.c
+++ /dev/null
@@ -1,28 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#include <linux/sched.h>
-#include <linux/sched/task_stack.h>
-#include <linux/kbuild.h>
-#include <asm/thread_info.h>
-#include <asm/ptrace.h>
-
-int main(void)
-{
-	DEFINE(TSK_TI_FLAGS, offsetof(struct task_struct, thread_info.flags));
-	DEFINE(TSK_TI_PREEMPT,
-	       offsetof(struct task_struct, thread_info.preempt_count));
-	DEFINE(THREAD_CPU_CONTEXT,
-	       offsetof(struct task_struct, thread.cpu_context));
-	DEFINE(OSP_OFFSET, offsetof(struct pt_regs, osp));
-	DEFINE(SP_OFFSET, offsetof(struct pt_regs, sp));
-	DEFINE(FUCOP_CTL_OFFSET, offsetof(struct pt_regs, fucop_ctl));
-	DEFINE(IPSW_OFFSET, offsetof(struct pt_regs, ipsw));
-	DEFINE(SYSCALLNO_OFFSET, offsetof(struct pt_regs, syscallno));
-	DEFINE(IPC_OFFSET, offsetof(struct pt_regs, ipc));
-	DEFINE(R0_OFFSET, offsetof(struct pt_regs, uregs[0]));
-	DEFINE(R15_OFFSET, offsetof(struct pt_regs, uregs[15]));
-	DEFINE(CLOCK_REALTIME_RES, MONOTONIC_RES_NSEC);
-	DEFINE(CLOCK_COARSE_RES, LOW_RES_NSEC);
-	return 0;
-}
diff --git a/arch/nds32/kernel/atl2c.c b/arch/nds32/kernel/atl2c.c
deleted file mode 100644
index 0c5386e72098..000000000000
--- a/arch/nds32/kernel/atl2c.c
+++ /dev/null
@@ -1,65 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#include <linux/compiler.h>
-#include <linux/of_address.h>
-#include <linux/of_fdt.h>
-#include <linux/of_platform.h>
-#include <asm/l2_cache.h>
-
-void __iomem *atl2c_base;
-static const struct of_device_id atl2c_ids[] __initconst = {
-	{.compatible = "andestech,atl2c",},
-	{}
-};
-
-static int __init atl2c_of_init(void)
-{
-	struct device_node *np;
-	struct resource res;
-	unsigned long tmp = 0;
-	unsigned long l2set, l2way, l2clsz;
-
-	if (!(__nds32__mfsr(NDS32_SR_MSC_CFG) & MSC_CFG_mskL2C))
-		return -ENODEV;
-
-	np = of_find_matching_node(NULL, atl2c_ids);
-	if (!np)
-		return -ENODEV;
-
-	if (of_address_to_resource(np, 0, &res))
-		return -ENODEV;
-
-	atl2c_base = ioremap(res.start, resource_size(&res));
-	if (!atl2c_base)
-		return -ENOMEM;
-
-	l2set =
-	    64 << ((L2C_R_REG(L2_CA_CONF_OFF) & L2_CA_CONF_mskL2SET) >>
-		   L2_CA_CONF_offL2SET);
-	l2way =
-	    1 +
-	    ((L2C_R_REG(L2_CA_CONF_OFF) & L2_CA_CONF_mskL2WAY) >>
-	     L2_CA_CONF_offL2WAY);
-	l2clsz =
-	    4 << ((L2C_R_REG(L2_CA_CONF_OFF) & L2_CA_CONF_mskL2CLSZ) >>
-		  L2_CA_CONF_offL2CLSZ);
-	pr_info("L2:%luKB/%luS/%luW/%luB\n",
-		l2set * l2way * l2clsz / 1024, l2set, l2way, l2clsz);
-
-	tmp = L2C_R_REG(L2CC_PROT_OFF);
-	tmp &= ~L2CC_PROT_mskMRWEN;
-	L2C_W_REG(L2CC_PROT_OFF, tmp);
-
-	tmp = L2C_R_REG(L2CC_SETUP_OFF);
-	tmp &= ~L2CC_SETUP_mskPART;
-	L2C_W_REG(L2CC_SETUP_OFF, tmp);
-
-	tmp = L2C_R_REG(L2CC_CTRL_OFF);
-	tmp |= L2CC_CTRL_mskEN;
-	L2C_W_REG(L2CC_CTRL_OFF, tmp);
-
-	return 0;
-}
-
-subsys_initcall(atl2c_of_init);
diff --git a/arch/nds32/kernel/cacheinfo.c b/arch/nds32/kernel/cacheinfo.c
deleted file mode 100644
index aab98e447feb..000000000000
--- a/arch/nds32/kernel/cacheinfo.c
+++ /dev/null
@@ -1,49 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#include <linux/bitops.h>
-#include <linux/cacheinfo.h>
-#include <linux/cpu.h>
-
-static void ci_leaf_init(struct cacheinfo *this_leaf,
-			 enum cache_type type, unsigned int level)
-{
-	char cache_type = (type & CACHE_TYPE_INST ? ICACHE : DCACHE);
-
-	this_leaf->level = level;
-	this_leaf->type = type;
-	this_leaf->coherency_line_size = CACHE_LINE_SIZE(cache_type);
-	this_leaf->number_of_sets = CACHE_SET(cache_type);
-	this_leaf->ways_of_associativity = CACHE_WAY(cache_type);
-	this_leaf->size = this_leaf->number_of_sets *
-	    this_leaf->coherency_line_size * this_leaf->ways_of_associativity;
-#if defined(CONFIG_CPU_DCACHE_WRITETHROUGH)
-	this_leaf->attributes = CACHE_WRITE_THROUGH;
-#else
-	this_leaf->attributes = CACHE_WRITE_BACK;
-#endif
-}
-
-int init_cache_level(unsigned int cpu)
-{
-	struct cpu_cacheinfo *this_cpu_ci = get_cpu_cacheinfo(cpu);
-
-	/* Only 1 level and I/D cache seperate. */
-	this_cpu_ci->num_levels = 1;
-	this_cpu_ci->num_leaves = 2;
-	return 0;
-}
-
-int populate_cache_leaves(unsigned int cpu)
-{
-	unsigned int level, idx;
-	struct cpu_cacheinfo *this_cpu_ci = get_cpu_cacheinfo(cpu);
-	struct cacheinfo *this_leaf = this_cpu_ci->info_list;
-
-	for (idx = 0, level = 1; level <= this_cpu_ci->num_levels &&
-	     idx < this_cpu_ci->num_leaves; idx++, level++) {
-		ci_leaf_init(this_leaf++, CACHE_TYPE_DATA, level);
-		ci_leaf_init(this_leaf++, CACHE_TYPE_INST, level);
-	}
-	return 0;
-}
diff --git a/arch/nds32/kernel/devtree.c b/arch/nds32/kernel/devtree.c
deleted file mode 100644
index bdce0fe5af9f..000000000000
--- a/arch/nds32/kernel/devtree.c
+++ /dev/null
@@ -1,19 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#include <linux/bug.h>
-#include <linux/printk.h>
-#include <linux/of_fdt.h>
-
-void __init early_init_devtree(void *params)
-{
-	if (!params || !early_init_dt_scan(params)) {
-		pr_crit("\n"
-			"Error: invalid device tree blob at (virtual address 0x%p)\n"
-			"\nPlease check your bootloader.", params);
-
-		BUG_ON(1);
-	}
-
-	dump_stack_set_arch_desc("%s (DT)", of_flat_dt_get_machine_name());
-}
diff --git a/arch/nds32/kernel/dma.c b/arch/nds32/kernel/dma.c
deleted file mode 100644
index 2ac8e6c82a61..000000000000
--- a/arch/nds32/kernel/dma.c
+++ /dev/null
@@ -1,82 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/dma-map-ops.h>
-#include <linux/cache.h>
-#include <linux/highmem.h>
-#include <asm/cacheflush.h>
-#include <asm/tlbflush.h>
-#include <asm/proc-fns.h>
-
-static inline void cache_op(phys_addr_t paddr, size_t size,
-		void (*fn)(unsigned long start, unsigned long end))
-{
-	struct page *page = pfn_to_page(paddr >> PAGE_SHIFT);
-	unsigned offset = paddr & ~PAGE_MASK;
-	size_t left = size;
-	unsigned long start;
-
-	do {
-		size_t len = left;
-
-		if (PageHighMem(page)) {
-			void *addr;
-
-			if (offset + len > PAGE_SIZE) {
-				if (offset >= PAGE_SIZE) {
-					page += offset >> PAGE_SHIFT;
-					offset &= ~PAGE_MASK;
-				}
-				len = PAGE_SIZE - offset;
-			}
-
-			addr = kmap_atomic(page);
-			start = (unsigned long)(addr + offset);
-			fn(start, start + len);
-			kunmap_atomic(addr);
-		} else {
-			start = (unsigned long)phys_to_virt(paddr);
-			fn(start, start + size);
-		}
-		offset = 0;
-		page++;
-		left -= len;
-	} while (left);
-}
-
-void arch_sync_dma_for_device(phys_addr_t paddr, size_t size,
-		enum dma_data_direction dir)
-{
-	switch (dir) {
-	case DMA_FROM_DEVICE:
-		break;
-	case DMA_TO_DEVICE:
-	case DMA_BIDIRECTIONAL:
-		cache_op(paddr, size, cpu_dma_wb_range);
-		break;
-	default:
-		BUG();
-	}
-}
-
-void arch_sync_dma_for_cpu(phys_addr_t paddr, size_t size,
-		enum dma_data_direction dir)
-{
-	switch (dir) {
-	case DMA_TO_DEVICE:
-		break;
-	case DMA_FROM_DEVICE:
-	case DMA_BIDIRECTIONAL:
-		cache_op(paddr, size, cpu_dma_inval_range);
-		break;
-	default:
-		BUG();
-	}
-}
-
-void arch_dma_prep_coherent(struct page *page, size_t size)
-{
-	cache_op(page_to_phys(page), size, cpu_dma_wbinval_range);
-}
diff --git a/arch/nds32/kernel/ex-entry.S b/arch/nds32/kernel/ex-entry.S
deleted file mode 100644
index 107d98a1d1b8..000000000000
--- a/arch/nds32/kernel/ex-entry.S
+++ /dev/null
@@ -1,177 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#include <linux/linkage.h>
-#include <asm/memory.h>
-#include <asm/nds32.h>
-#include <asm/errno.h>
-#include <asm/asm-offsets.h>
-#include <asm/page.h>
-#include <asm/fpu.h>
-
-#ifdef CONFIG_HWZOL
-	.macro push_zol
-	mfusr	$r14, $LB
-	mfusr	$r15, $LE
-	mfusr	$r16, $LC
-	.endm
-#endif
-	.macro  skip_save_fucop_ctl
-#if defined(CONFIG_FPU)
-skip_fucop_ctl:
-	smw.adm $p0, [$sp], $p0, #0x1
-	j fucop_ctl_done
-#endif
-	.endm
-
-	.macro	save_user_regs
-#if defined(CONFIG_FPU)
-	sethi   $p0, hi20(has_fpu)
-	lbsi 	$p0, [$p0+lo12(has_fpu)]
-	beqz	$p0, skip_fucop_ctl
-	mfsr    $p0, $FUCOP_CTL
-	smw.adm $p0, [$sp], $p0, #0x1
-	bclr    $p0, $p0, #FUCOP_CTL_offCP0EN
-	mtsr    $p0, $FUCOP_CTL
-fucop_ctl_done:
-	/* move $SP to the bottom of pt_regs */
-	addi    $sp, $sp, -FUCOP_CTL_OFFSET
-#else
-	smw.adm $sp, [$sp], $sp, #0x1
-	/* move $SP to the bottom of pt_regs */
-	addi    $sp, $sp, -OSP_OFFSET
-#endif
-
-	/* push $r0 ~ $r25 */
-	smw.bim $r0, [$sp], $r25
-	/* push $fp, $gp, $lp */
-	smw.bim $sp, [$sp], $sp, #0xe
-
-	mfsr	$r12, $SP_USR
-	mfsr	$r13, $IPC
-#ifdef CONFIG_HWZOL
-	push_zol
-#endif
-	movi	$r17, -1
-	move	$r18, $r0
-	mfsr	$r19, $PSW
-	mfsr	$r20, $IPSW
-	mfsr	$r21, $P_IPSW
-	mfsr	$r22, $P_IPC
-	mfsr	$r23, $P_P0
-	mfsr	$r24, $P_P1
-	smw.bim $r12, [$sp], $r24, #0
-	addi	$sp, $sp, -FUCOP_CTL_OFFSET
-
-	/* Initialize kernel space $fp */
-	andi    $p0, $r20, #PSW_mskPOM
-	movi    $p1, #0x0
-	cmovz   $fp, $p1, $p0
-
-	andi	$r16, $r19, #PSW_mskINTL
-	slti	$r17, $r16, #4
-	bnez	$r17, 1f
-	addi	$r17, $r19, #-2
-	mtsr	$r17, $PSW
-	isb
-1:
-	/* If it was superuser mode, we don't need to update $r25 */
-	bnez	$p0, 2f
-	la	$p0, __entry_task
-	lw	$r25, [$p0]
-2:
-	.endm
-
-	.text
-
-/*
- * Exception Vector
- */
-exception_handlers:
-	.long	unhandled_exceptions	!Reset/NMI
-	.long	unhandled_exceptions	!TLB fill
-	.long	do_page_fault		!PTE not present
-	.long	do_dispatch_tlb_misc	!TLB misc
-	.long	unhandled_exceptions	!TLB VLPT
-	.long	unhandled_exceptions	!Machine Error
-	.long	do_debug_trap		!Debug related
-	.long	do_dispatch_general	!General exception
-	.long	eh_syscall		!Syscall
-	.long	asm_do_IRQ		!IRQ
-
-	skip_save_fucop_ctl
-common_exception_handler:
-	save_user_regs
-	mfsr	$p0, $ITYPE
-	andi	$p0, $p0, #ITYPE_mskVECTOR
-	srli	$p0, $p0, #ITYPE_offVECTOR
-	andi	$p1, $p0, #NDS32_VECTOR_mskNONEXCEPTION
-	bnez	$p1, 1f
-	sethi	$lp, hi20(ret_from_exception)
-	ori	$lp, $lp, lo12(ret_from_exception)
-	sethi	$p1, hi20(exception_handlers)
-	ori	$p1, $p1, lo12(exception_handlers)
-	lw	$p1, [$p1+$p0<<2]
-	move	$r0, $p0
-	mfsr	$r1, $EVA
-	mfsr	$r2, $ITYPE
-	move	$r3, $sp
-	mfsr    $r4, $OIPC
-	/* enable gie if it is enabled in IPSW. */
-	mfsr	$r21, $PSW
-	andi	$r20, $r20, #PSW_mskGIE	/* r20 is $IPSW*/
-	or	$r21, $r21, $r20
-	mtsr	$r21, $PSW
-	dsb
-	jr	$p1
-	/* syscall */
-1:
-	addi	$p1, $p0, #-NDS32_VECTOR_offEXCEPTION
-	bnez	$p1, 2f
-	sethi	$lp, hi20(ret_from_exception)
-	ori	$lp, $lp, lo12(ret_from_exception)
-	sethi	$p1, hi20(exception_handlers)
-	ori	$p1, $p1, lo12(exception_handlers)
-	lwi	$p1, [$p1+#NDS32_VECTOR_offEXCEPTION<<2]
-	jr	$p1
-
-	/* interrupt */
-2:
-#ifdef CONFIG_TRACE_IRQFLAGS
-	jal     __trace_hardirqs_off
-#endif
-	move	$r0, $sp
-	sethi	$lp, hi20(ret_from_intr)
-	ori	$lp, $lp, lo12(ret_from_intr)
-	sethi	$p0, hi20(exception_handlers)
-	ori	$p0, $p0, lo12(exception_handlers)
-	lwi	$p0, [$p0+#NDS32_VECTOR_offINTERRUPT<<2]
-	jr	$p0
-
-	.macro	EXCEPTION_VECTOR_DEBUG
-	.align 4
-	mfsr     $p0, $EDM_CTL
-	andi     $p0, $p0, EDM_CTL_mskV3_EDM_MODE
-	tnez     $p0, SWID_RAISE_INTERRUPT_LEVEL
-	.endm
-
-	.macro	EXCEPTION_VECTOR
-	.align 4
-	sethi	 $p0, hi20(common_exception_handler)
-	ori	 $p0, $p0, lo12(common_exception_handler)
-	jral.ton $p0, $p0
-	.endm
-
-	.section	".text.init", #alloc, #execinstr
-	.global	exception_vector
-exception_vector:
-.rept 6
-	EXCEPTION_VECTOR
-.endr
-	EXCEPTION_VECTOR_DEBUG
-.rept 121
-	EXCEPTION_VECTOR
-.endr
-	.align 4
-	.global	exception_vector_end
-exception_vector_end:
diff --git a/arch/nds32/kernel/ex-exit.S b/arch/nds32/kernel/ex-exit.S
deleted file mode 100644
index b30699911b81..000000000000
--- a/arch/nds32/kernel/ex-exit.S
+++ /dev/null
@@ -1,193 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#include <linux/linkage.h>
-#include <asm/unistd.h>
-#include <asm/assembler.h>
-#include <asm/nds32.h>
-#include <asm/asm-offsets.h>
-#include <asm/thread_info.h>
-#include <asm/current.h>
-#include <asm/fpu.h>
-
-
-
-#ifdef CONFIG_HWZOL
-	.macro pop_zol
-	mtusr	$r14, $LB
-	mtusr	$r15, $LE
-	mtusr	$r16, $LC
-	.endm
-#endif
-
-	.macro	restore_user_regs_first
-	setgie.d
-	isb
-#if defined(CONFIG_FPU)
-	addi    $sp, $sp, OSP_OFFSET
-	lmw.adm $r12, [$sp], $r25, #0x0
-	sethi   $p0, hi20(has_fpu)
-	lbsi 	$p0, [$p0+lo12(has_fpu)]
-	beqz	$p0, 2f
-	mtsr    $r25, $FUCOP_CTL
-2:
-#else
-	addi	$sp, $sp, FUCOP_CTL_OFFSET
-	lmw.adm $r12, [$sp], $r24, #0x0
-#endif
-	mtsr	$r12, $SP_USR
-	mtsr	$r13, $IPC
-#ifdef CONFIG_HWZOL
-	pop_zol
-#endif
-	mtsr	$r19, $PSW
-	mtsr	$r20, $IPSW
-	mtsr    $r21, $P_IPSW
-	mtsr	$r22, $P_IPC
-	mtsr	$r23, $P_P0
-	mtsr	$r24, $P_P1
-	lmw.adm $sp, [$sp], $sp, #0xe
-	.endm
-
-	.macro	restore_user_regs_last
-	pop	$p0
-	cmovn	$sp, $p0, $p0
-
-	iret
-	nop
-
-	.endm
-
-	.macro	restore_user_regs
-	restore_user_regs_first
-	lmw.adm $r0, [$sp], $r25, #0x0
-	addi	$sp, $sp, OSP_OFFSET
-	restore_user_regs_last
-	.endm
-
-	.macro	fast_restore_user_regs
-	restore_user_regs_first
-	lmw.adm $r1, [$sp], $r25, #0x0
-	addi	$sp, $sp, OSP_OFFSET-4
-	restore_user_regs_last
-	.endm
-
-#ifdef CONFIG_PREEMPTION
-	.macro	preempt_stop
-	.endm
-#else
-	.macro	preempt_stop
-	setgie.d
-	isb
-	.endm
-#define	resume_kernel	no_work_pending
-#endif
-
-ENTRY(ret_from_exception)
-	preempt_stop
-ENTRY(ret_from_intr)
-
-/*
- * judge Kernel or user mode
- *
- */
-	lwi	$p0, [$sp+(#IPSW_OFFSET)]	! Check if in nested interrupt
-	andi	$p0, $p0, #PSW_mskINTL
-	bnez	$p0, resume_kernel		! done with iret
-	j	resume_userspace
-
-
-/*
- * This is the fast syscall return path.  We do as little as
- * possible here, and this includes saving $r0 back into the SVC
- * stack.
- * fixed: tsk - $r25, syscall # - $r7, syscall table pointer - $r8
- */
-ENTRY(ret_fast_syscall)
-	gie_disable
-	lwi	$r1, [tsk+#TSK_TI_FLAGS]
-	andi	$p1, $r1, #_TIF_WORK_MASK
-	bnez	$p1, fast_work_pending
-	fast_restore_user_regs			! iret
-
-/*
- * Ok, we need to do extra processing,
- * enter the slow path returning from syscall, while pending work.
- */
-fast_work_pending:
-	swi	$r0, [$sp+(#R0_OFFSET)]		! what is different from ret_from_exception
-work_pending:
-	andi	$p1, $r1, #_TIF_NEED_RESCHED
-	bnez	$p1, work_resched
-
-	andi	$p1, $r1, #_TIF_SIGPENDING|#_TIF_NOTIFY_RESUME|#_TIF_NOTIFY_SIGNAL
-	beqz	$p1, no_work_pending
-
-	move	$r0, $sp			! 'regs'
-	gie_enable
-	bal	do_notify_resume
-	b       ret_slow_syscall
-work_resched:
-	bal	schedule			! path, return to user mode
-
-/*
- * "slow" syscall return path.
- */
-ENTRY(resume_userspace)
-ENTRY(ret_slow_syscall)
-	gie_disable
-	lwi	$p0, [$sp+(#IPSW_OFFSET)]	! Check if in nested interrupt
-	andi	$p0, $p0, #PSW_mskINTL
-	bnez	$p0, no_work_pending		! done with iret
-	lwi	$r1, [tsk+#TSK_TI_FLAGS]
-	andi	$p1, $r1, #_TIF_WORK_MASK
-	bnez	$p1, work_pending		! handle work_resched, sig_pend
-
-no_work_pending:
-#ifdef CONFIG_TRACE_IRQFLAGS
-	lwi	$p0, [$sp+(#IPSW_OFFSET)]
-	andi	$p0, $p0, #0x1
-	la	$r10, __trace_hardirqs_off
-	la	$r9, __trace_hardirqs_on
-	cmovz	$r9, $p0, $r10
-	jral	$r9
-#endif
-	restore_user_regs			! return from iret
-
-
-/*
- * preemptive kernel
- */
-#ifdef CONFIG_PREEMPTION
-resume_kernel:
-	gie_disable
-	lwi	$t0, [tsk+#TSK_TI_PREEMPT]
-	bnez	$t0, no_work_pending
-
-	lwi	$t0, [tsk+#TSK_TI_FLAGS]
-	andi	$p1, $t0, #_TIF_NEED_RESCHED
-	beqz	$p1, no_work_pending
-
-	lwi	$t0, [$sp+(#IPSW_OFFSET)]	! Interrupts off?
-	andi	$t0, $t0, #1
-	beqz	$t0, no_work_pending
-
-	jal	preempt_schedule_irq
-	b	no_work_pending
-#endif
-
-/*
- * This is how we return from a fork.
- */
-ENTRY(ret_from_fork)
-	bal	schedule_tail
-	beqz	$r6, 1f				! r6 stores fn for kernel thread
-	move	$r0, $r7			! prepare kernel thread arg
-	jral	$r6
-1:
-	lwi	$r1, [tsk+#TSK_TI_FLAGS]		! check for syscall tracing
-	andi	$p1, $r1, #_TIF_WORK_SYSCALL_LEAVE	! are we tracing syscalls?
-	beqz	$p1, ret_slow_syscall
-	move    $r0, $sp
-	bal	syscall_trace_leave
-	b	ret_slow_syscall
diff --git a/arch/nds32/kernel/ex-scall.S b/arch/nds32/kernel/ex-scall.S
deleted file mode 100644
index 270050f1b7b1..000000000000
--- a/arch/nds32/kernel/ex-scall.S
+++ /dev/null
@@ -1,100 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#include <linux/linkage.h>
-#include <asm/unistd.h>
-#include <asm/assembler.h>
-#include <asm/nds32.h>
-#include <asm/asm-offsets.h>
-#include <asm/thread_info.h>
-#include <asm/current.h>
-
-/*
- * $r0 = previous task_struct,
- * $r1 = next task_struct,
- * previous and next are guaranteed not to be the same.
- */
-
-ENTRY(__switch_to)
-
-	la	$p0, __entry_task
-	sw	$r1, [$p0]
-	addi	$p1, $r0, #THREAD_CPU_CONTEXT
-	smw.bi 	$r6, [$p1], $r14, #0xb		! push r6~r14, fp, lp, sp
-	move	$r25, $r1
-#if defined(CONFIG_FPU)
-	call	_switch_fpu
-#endif
-	addi	$r1, $r25, #THREAD_CPU_CONTEXT
-	lmw.bi 	$r6, [$r1], $r14, #0xb		! pop r6~r14, fp, lp, sp
-	ret
-
-
-#define tbl $r8
-
-/*
- * $r7 will be writen as syscall nr
- */
-	.macro	get_scno
-	lwi	$r7, [$sp + R15_OFFSET]
-	swi	$r7, [$sp + SYSCALLNO_OFFSET]
-	.endm
-
-	.macro	updateipc
-	addi	$r17, $r13, #4				! $r13 is $IPC
-	swi	$r17, [$sp + IPC_OFFSET]
-	.endm
-
-ENTRY(eh_syscall)
-	updateipc
-
-	get_scno
-	gie_enable
-
-	lwi	$p0, [tsk+#TSK_TI_FLAGS]		! check for syscall tracing
-
-	andi	$p1, $p0, #_TIF_WORK_SYSCALL_ENTRY	! are we tracing syscalls?
-	bnez	$p1, __sys_trace
-
-	la	$lp, ret_fast_syscall		! return address
-jmp_systbl:
-	addi	$p1, $r7, #-__NR_syscalls	! syscall number of syscall instruction is guarded by addembler
-	bgez	$p1, _SCNO_EXCEED		! call sys_* routine
-	la	tbl, sys_call_table		! load syscall table pointer
-	slli	$p1, $r7, #2
-	add	$p1, tbl, $p1
-	lwi	$p1, [$p1]
-	jr	$p1				! no return
-
-_SCNO_EXCEED:
-	ori	$r0, $r7, #0
-        ori	$r1, $sp, #0
-	b	bad_syscall
-
-/*
- * This is the really slow path.  We're going to be doing
- * context switches, and waiting for our parent to respond.
- */
-__sys_trace:
-	move	$r0, $sp
-	bal	syscall_trace_enter
-	move	$r7, $r0
-	la	$lp, __sys_trace_return		! return address
-
-	addi    $p1, $r7, #1
-	beqz    $p1, ret_slow_syscall		! fatal signal is pending
-
-	addi	$p1, $sp, #R0_OFFSET		! pointer to regs
-	lmw.bi	$r0, [$p1], $r5			! have to reload $r0 - $r5
-	b	jmp_systbl
-
-__sys_trace_return:
-	swi	$r0, [$sp+#R0_OFFSET]		! T: save returned $r0
-	move	$r0, $sp			! set pt_regs for syscall_trace_leave
-	bal	syscall_trace_leave
-	b	ret_slow_syscall
-
-ENTRY(sys_rt_sigreturn_wrapper)
-	addi	$r0, $sp, #0
-	b	sys_rt_sigreturn
-ENDPROC(sys_rt_sigreturn_wrapper)
diff --git a/arch/nds32/kernel/fpu.c b/arch/nds32/kernel/fpu.c
deleted file mode 100644
index 701c09a668de..000000000000
--- a/arch/nds32/kernel/fpu.c
+++ /dev/null
@@ -1,266 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2018 Andes Technology Corporation
-
-#include <linux/sched.h>
-#include <linux/signal.h>
-#include <linux/sched/signal.h>
-#include <asm/processor.h>
-#include <asm/user.h>
-#include <asm/io.h>
-#include <asm/bitfield.h>
-#include <asm/fpu.h>
-
-const struct fpu_struct init_fpuregs = {
-	.fd_regs = {[0 ... 31] = sNAN64},
-	.fpcsr = FPCSR_INIT,
-#if IS_ENABLED(CONFIG_SUPPORT_DENORMAL_ARITHMETIC)
-	.UDF_IEX_trap = 0
-#endif
-};
-
-void save_fpu(struct task_struct *tsk)
-{
-	unsigned int fpcfg, fpcsr;
-
-	enable_fpu();
-	fpcfg = ((__nds32__fmfcfg() & FPCFG_mskFREG) >> FPCFG_offFREG);
-	switch (fpcfg) {
-	case SP32_DP32_reg:
-		asm volatile ("fsdi $fd31, [%0+0xf8]\n\t"
-			      "fsdi $fd30, [%0+0xf0]\n\t"
-			      "fsdi $fd29, [%0+0xe8]\n\t"
-			      "fsdi $fd28, [%0+0xe0]\n\t"
-			      "fsdi $fd27, [%0+0xd8]\n\t"
-			      "fsdi $fd26, [%0+0xd0]\n\t"
-			      "fsdi $fd25, [%0+0xc8]\n\t"
-			      "fsdi $fd24, [%0+0xc0]\n\t"
-			      "fsdi $fd23, [%0+0xb8]\n\t"
-			      "fsdi $fd22, [%0+0xb0]\n\t"
-			      "fsdi $fd21, [%0+0xa8]\n\t"
-			      "fsdi $fd20, [%0+0xa0]\n\t"
-			      "fsdi $fd19, [%0+0x98]\n\t"
-			      "fsdi $fd18, [%0+0x90]\n\t"
-			      "fsdi $fd17, [%0+0x88]\n\t"
-			      "fsdi $fd16, [%0+0x80]\n\t"
-			      :	/* no output */
-			      : "r" (&tsk->thread.fpu)
-			      : "memory");
-		fallthrough;
-	case SP32_DP16_reg:
-		asm volatile ("fsdi $fd15, [%0+0x78]\n\t"
-			      "fsdi $fd14, [%0+0x70]\n\t"
-			      "fsdi $fd13, [%0+0x68]\n\t"
-			      "fsdi $fd12, [%0+0x60]\n\t"
-			      "fsdi $fd11, [%0+0x58]\n\t"
-			      "fsdi $fd10, [%0+0x50]\n\t"
-			      "fsdi $fd9,  [%0+0x48]\n\t"
-			      "fsdi $fd8,  [%0+0x40]\n\t"
-			      :	/* no output */
-			      : "r" (&tsk->thread.fpu)
-			      : "memory");
-		fallthrough;
-	case SP16_DP8_reg:
-		asm volatile ("fsdi $fd7,  [%0+0x38]\n\t"
-			      "fsdi $fd6,  [%0+0x30]\n\t"
-			      "fsdi $fd5,  [%0+0x28]\n\t"
-			      "fsdi $fd4,  [%0+0x20]\n\t"
-			      :	/* no output */
-			      : "r" (&tsk->thread.fpu)
-			      : "memory");
-		fallthrough;
-	case SP8_DP4_reg:
-		asm volatile ("fsdi $fd3,  [%1+0x18]\n\t"
-			      "fsdi $fd2,  [%1+0x10]\n\t"
-			      "fsdi $fd1,  [%1+0x8]\n\t"
-			      "fsdi $fd0,  [%1+0x0]\n\t"
-			      "fmfcsr	%0\n\t"
-			      "swi  %0, [%1+0x100]\n\t"
-			      : "=&r" (fpcsr)
-			      : "r"(&tsk->thread.fpu)
-			      : "memory");
-	}
-	disable_fpu();
-}
-
-void load_fpu(const struct fpu_struct *fpregs)
-{
-	unsigned int fpcfg, fpcsr;
-
-	enable_fpu();
-	fpcfg = ((__nds32__fmfcfg() & FPCFG_mskFREG) >> FPCFG_offFREG);
-	switch (fpcfg) {
-	case SP32_DP32_reg:
-		asm volatile ("fldi $fd31, [%0+0xf8]\n\t"
-			      "fldi $fd30, [%0+0xf0]\n\t"
-			      "fldi $fd29, [%0+0xe8]\n\t"
-			      "fldi $fd28, [%0+0xe0]\n\t"
-			      "fldi $fd27, [%0+0xd8]\n\t"
-			      "fldi $fd26, [%0+0xd0]\n\t"
-			      "fldi $fd25, [%0+0xc8]\n\t"
-			      "fldi $fd24, [%0+0xc0]\n\t"
-			      "fldi $fd23, [%0+0xb8]\n\t"
-			      "fldi $fd22, [%0+0xb0]\n\t"
-			      "fldi $fd21, [%0+0xa8]\n\t"
-			      "fldi $fd20, [%0+0xa0]\n\t"
-			      "fldi $fd19, [%0+0x98]\n\t"
-			      "fldi $fd18, [%0+0x90]\n\t"
-			      "fldi $fd17, [%0+0x88]\n\t"
-			      "fldi $fd16, [%0+0x80]\n\t"
-			      :	/* no output */
-			      : "r" (fpregs));
-		fallthrough;
-	case SP32_DP16_reg:
-		asm volatile ("fldi $fd15, [%0+0x78]\n\t"
-			      "fldi $fd14, [%0+0x70]\n\t"
-			      "fldi $fd13, [%0+0x68]\n\t"
-			      "fldi $fd12, [%0+0x60]\n\t"
-			      "fldi $fd11, [%0+0x58]\n\t"
-			      "fldi $fd10, [%0+0x50]\n\t"
-			      "fldi $fd9,  [%0+0x48]\n\t"
-			      "fldi $fd8,  [%0+0x40]\n\t"
-			      :	/* no output */
-			      : "r" (fpregs));
-		fallthrough;
-	case SP16_DP8_reg:
-		asm volatile ("fldi $fd7,  [%0+0x38]\n\t"
-			      "fldi $fd6,  [%0+0x30]\n\t"
-			      "fldi $fd5,  [%0+0x28]\n\t"
-			      "fldi $fd4,  [%0+0x20]\n\t"
-			      :	/* no output */
-			      : "r" (fpregs));
-		fallthrough;
-	case SP8_DP4_reg:
-		asm volatile ("fldi $fd3,  [%1+0x18]\n\t"
-			      "fldi $fd2,  [%1+0x10]\n\t"
-			      "fldi $fd1,  [%1+0x8]\n\t"
-			      "fldi $fd0,  [%1+0x0]\n\t"
-			      "lwi  %0, [%1+0x100]\n\t"
-			      "fmtcsr	%0\n\t":"=&r" (fpcsr)
-			      : "r"(fpregs));
-	}
-	disable_fpu();
-}
-void store_fpu_for_suspend(void)
-{
-#ifdef CONFIG_LAZY_FPU
-	if (last_task_used_math != NULL)
-		save_fpu(last_task_used_math);
-	last_task_used_math = NULL;
-#else
-	if (!used_math())
-		return;
-	unlazy_fpu(current);
-#endif
-	clear_fpu(task_pt_regs(current));
-}
-inline void do_fpu_context_switch(struct pt_regs *regs)
-{
-	/* Enable to use FPU. */
-
-	if (!user_mode(regs)) {
-		pr_err("BUG: FPU is used in kernel mode.\n");
-		BUG();
-		return;
-	}
-
-	enable_ptreg_fpu(regs);
-#ifdef CONFIG_LAZY_FPU	//Lazy FPU is used
-	if (last_task_used_math == current)
-		return;
-	if (last_task_used_math != NULL)
-		/* Other processes fpu state, save away */
-		save_fpu(last_task_used_math);
-	last_task_used_math = current;
-#endif
-	if (used_math()) {
-		load_fpu(&current->thread.fpu);
-	} else {
-		/* First time FPU user.  */
-		load_fpu(&init_fpuregs);
-#if IS_ENABLED(CONFIG_SUPPORT_DENORMAL_ARITHMETIC)
-		current->thread.fpu.UDF_IEX_trap = init_fpuregs.UDF_IEX_trap;
-#endif
-		set_used_math();
-	}
-
-}
-
-inline void fill_sigfpe_signo(unsigned int fpcsr, int *signo)
-{
-	if (fpcsr & FPCSR_mskOVFT)
-		*signo = FPE_FLTOVF;
-#ifndef CONFIG_SUPPORT_DENORMAL_ARITHMETIC
-	else if (fpcsr & FPCSR_mskUDFT)
-		*signo = FPE_FLTUND;
-#endif
-	else if (fpcsr & FPCSR_mskIVOT)
-		*signo = FPE_FLTINV;
-	else if (fpcsr & FPCSR_mskDBZT)
-		*signo = FPE_FLTDIV;
-	else if (fpcsr & FPCSR_mskIEXT)
-		*signo = FPE_FLTRES;
-}
-
-inline void handle_fpu_exception(struct pt_regs *regs)
-{
-	unsigned int fpcsr;
-	int si_code = 0, si_signo = SIGFPE;
-#if IS_ENABLED(CONFIG_SUPPORT_DENORMAL_ARITHMETIC)
-	unsigned long redo_except = FPCSR_mskDNIT|FPCSR_mskUDFT|FPCSR_mskIEXT;
-#else
-	unsigned long redo_except = FPCSR_mskDNIT;
-#endif
-
-	lose_fpu();
-	fpcsr = current->thread.fpu.fpcsr;
-
-	if (fpcsr & redo_except) {
-		si_signo = do_fpuemu(regs, &current->thread.fpu);
-		fpcsr = current->thread.fpu.fpcsr;
-		if (!si_signo) {
-			current->thread.fpu.fpcsr &= ~(redo_except);
-			goto done;
-		}
-	} else if (fpcsr & FPCSR_mskRIT) {
-		if (!user_mode(regs))
-			make_task_dead(SIGILL);
-		si_signo = SIGILL;
-	}
-
-	switch (si_signo) {
-	case SIGFPE:
-		fill_sigfpe_signo(fpcsr, &si_code);
-		break;
-	case SIGILL:
-		show_regs(regs);
-		si_code = ILL_COPROC;
-		break;
-	case SIGBUS:
-		si_code = BUS_ADRERR;
-		break;
-	default:
-		break;
-	}
-
-	force_sig_fault(si_signo, si_code,
-			(void __user *)instruction_pointer(regs));
-done:
-	own_fpu();
-}
-
-bool do_fpu_exception(unsigned int subtype, struct pt_regs *regs)
-{
-	int done = true;
-	/* Coprocessor disabled exception */
-	if (subtype == FPU_DISABLE_EXCEPTION) {
-		preempt_disable();
-		do_fpu_context_switch(regs);
-		preempt_enable();
-	}
-	/* Coprocessor exception such as underflow and overflow */
-	else if (subtype == FPU_EXCEPTION)
-		handle_fpu_exception(regs);
-	else
-		done = false;
-	return done;
-}
diff --git a/arch/nds32/kernel/ftrace.c b/arch/nds32/kernel/ftrace.c
deleted file mode 100644
index 711bc8cd186d..000000000000
--- a/arch/nds32/kernel/ftrace.c
+++ /dev/null
@@ -1,278 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-
-#include <linux/ftrace.h>
-#include <linux/uaccess.h>
-#include <asm/cacheflush.h>
-
-#ifndef CONFIG_DYNAMIC_FTRACE
-extern void (*ftrace_trace_function)(unsigned long, unsigned long,
-				     struct ftrace_ops*, struct ftrace_regs*);
-extern void ftrace_graph_caller(void);
-
-noinline void __naked ftrace_stub(unsigned long ip, unsigned long parent_ip,
-				  struct ftrace_ops *op, struct ftrace_regs *fregs)
-{
-	__asm__ ("");  /* avoid to optimize as pure function */
-}
-
-noinline void _mcount(unsigned long parent_ip)
-{
-	/* save all state by the compiler prologue */
-
-	unsigned long ip = (unsigned long)__builtin_return_address(0);
-
-	if (ftrace_trace_function != ftrace_stub)
-		ftrace_trace_function(ip - MCOUNT_INSN_SIZE, parent_ip,
-				      NULL, NULL);
-
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-	if (ftrace_graph_return != (trace_func_graph_ret_t)ftrace_stub
-	    || ftrace_graph_entry != ftrace_graph_entry_stub)
-		ftrace_graph_caller();
-#endif
-
-	/* restore all state by the compiler epilogue */
-}
-EXPORT_SYMBOL(_mcount);
-
-#else /* CONFIG_DYNAMIC_FTRACE */
-
-noinline void __naked ftrace_stub(unsigned long ip, unsigned long parent_ip,
-				  struct ftrace_ops *op, struct ftrace_regs *fregs)
-{
-	__asm__ ("");  /* avoid to optimize as pure function */
-}
-
-noinline void __naked _mcount(unsigned long parent_ip)
-{
-	__asm__ ("");  /* avoid to optimize as pure function */
-}
-EXPORT_SYMBOL(_mcount);
-
-#define XSTR(s) STR(s)
-#define STR(s) #s
-void _ftrace_caller(unsigned long parent_ip)
-{
-	/* save all state needed by the compiler prologue */
-
-	/*
-	 * prepare arguments for real tracing function
-	 * first  arg : __builtin_return_address(0) - MCOUNT_INSN_SIZE
-	 * second arg : parent_ip
-	 */
-	__asm__ __volatile__ (
-		"move $r1, %0				   \n\t"
-		"addi $r0, %1, #-" XSTR(MCOUNT_INSN_SIZE) "\n\t"
-		:
-		: "r" (parent_ip), "r" (__builtin_return_address(0)));
-
-	/* a placeholder for the call to a real tracing function */
-	__asm__ __volatile__ (
-		"ftrace_call:		\n\t"
-		"nop			\n\t"
-		"nop			\n\t"
-		"nop			\n\t");
-
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-	/* a placeholder for the call to ftrace_graph_caller */
-	__asm__ __volatile__ (
-		"ftrace_graph_call:	\n\t"
-		"nop			\n\t"
-		"nop			\n\t"
-		"nop			\n\t");
-#endif
-	/* restore all state needed by the compiler epilogue */
-}
-
-static unsigned long gen_sethi_insn(unsigned long addr)
-{
-	unsigned long opcode = 0x46000000;
-	unsigned long imm = addr >> 12;
-	unsigned long rt_num = 0xf << 20;
-
-	return ENDIAN_CONVERT(opcode | rt_num | imm);
-}
-
-static unsigned long gen_ori_insn(unsigned long addr)
-{
-	unsigned long opcode = 0x58000000;
-	unsigned long imm = addr & 0x0000fff;
-	unsigned long rt_num = 0xf << 20;
-	unsigned long ra_num = 0xf << 15;
-
-	return ENDIAN_CONVERT(opcode | rt_num | ra_num | imm);
-}
-
-static unsigned long gen_jral_insn(unsigned long addr)
-{
-	unsigned long opcode = 0x4a000001;
-	unsigned long rt_num = 0x1e << 20;
-	unsigned long rb_num = 0xf << 10;
-
-	return ENDIAN_CONVERT(opcode | rt_num | rb_num);
-}
-
-static void ftrace_gen_call_insn(unsigned long *call_insns,
-				 unsigned long addr)
-{
-	call_insns[0] = gen_sethi_insn(addr); /* sethi $r15, imm20u       */
-	call_insns[1] = gen_ori_insn(addr);   /* ori   $r15, $r15, imm15u */
-	call_insns[2] = gen_jral_insn(addr);  /* jral  $lp,  $r15         */
-}
-
-static int __ftrace_modify_code(unsigned long pc, unsigned long *old_insn,
-				unsigned long *new_insn, bool validate)
-{
-	unsigned long orig_insn[3];
-
-	if (validate) {
-		if (copy_from_kernel_nofault(orig_insn, (void *)pc,
-				MCOUNT_INSN_SIZE))
-			return -EFAULT;
-		if (memcmp(orig_insn, old_insn, MCOUNT_INSN_SIZE))
-			return -EINVAL;
-	}
-
-	if (copy_to_kernel_nofault((void *)pc, new_insn, MCOUNT_INSN_SIZE))
-		return -EPERM;
-
-	return 0;
-}
-
-static int ftrace_modify_code(unsigned long pc, unsigned long *old_insn,
-			      unsigned long *new_insn, bool validate)
-{
-	int ret;
-
-	ret = __ftrace_modify_code(pc, old_insn, new_insn, validate);
-	if (ret)
-		return ret;
-
-	flush_icache_range(pc, pc + MCOUNT_INSN_SIZE);
-
-	return ret;
-}
-
-int ftrace_update_ftrace_func(ftrace_func_t func)
-{
-	unsigned long pc = (unsigned long)&ftrace_call;
-	unsigned long old_insn[3] = {INSN_NOP, INSN_NOP, INSN_NOP};
-	unsigned long new_insn[3] = {INSN_NOP, INSN_NOP, INSN_NOP};
-
-	if (func != ftrace_stub)
-		ftrace_gen_call_insn(new_insn, (unsigned long)func);
-
-	return ftrace_modify_code(pc, old_insn, new_insn, false);
-}
-
-int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
-{
-	unsigned long pc = rec->ip;
-	unsigned long nop_insn[3] = {INSN_NOP, INSN_NOP, INSN_NOP};
-	unsigned long call_insn[3] = {INSN_NOP, INSN_NOP, INSN_NOP};
-
-	ftrace_gen_call_insn(call_insn, addr);
-
-	return ftrace_modify_code(pc, nop_insn, call_insn, true);
-}
-
-int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec,
-		    unsigned long addr)
-{
-	unsigned long pc = rec->ip;
-	unsigned long nop_insn[3] = {INSN_NOP, INSN_NOP, INSN_NOP};
-	unsigned long call_insn[3] = {INSN_NOP, INSN_NOP, INSN_NOP};
-
-	ftrace_gen_call_insn(call_insn, addr);
-
-	return ftrace_modify_code(pc, call_insn, nop_insn, true);
-}
-#endif /* CONFIG_DYNAMIC_FTRACE */
-
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
-			   unsigned long frame_pointer)
-{
-	unsigned long return_hooker = (unsigned long)&return_to_handler;
-	unsigned long old;
-
-	if (unlikely(atomic_read(&current->tracing_graph_pause)))
-		return;
-
-	old = *parent;
-
-	if (!function_graph_enter(old, self_addr, frame_pointer, NULL))
-		*parent = return_hooker;
-}
-
-noinline void ftrace_graph_caller(void)
-{
-	unsigned long *parent_ip =
-		(unsigned long *)(__builtin_frame_address(2) - 4);
-
-	unsigned long selfpc =
-		(unsigned long)(__builtin_return_address(1) - MCOUNT_INSN_SIZE);
-
-	unsigned long frame_pointer =
-		(unsigned long)__builtin_frame_address(3);
-
-	prepare_ftrace_return(parent_ip, selfpc, frame_pointer);
-}
-
-extern unsigned long ftrace_return_to_handler(unsigned long frame_pointer);
-void __naked return_to_handler(void)
-{
-	__asm__ __volatile__ (
-		/* save state needed by the ABI     */
-		"smw.adm $r0,[$sp],$r1,#0x0  \n\t"
-
-		/* get original return address      */
-		"move $r0, $fp               \n\t"
-		"bal ftrace_return_to_handler\n\t"
-		"move $lp, $r0               \n\t"
-
-		/* restore state needed by the ABI  */
-		"lmw.bim $r0,[$sp],$r1,#0x0  \n\t");
-}
-
-#ifdef CONFIG_DYNAMIC_FTRACE
-extern unsigned long ftrace_graph_call;
-
-static int ftrace_modify_graph_caller(bool enable)
-{
-	unsigned long pc = (unsigned long)&ftrace_graph_call;
-	unsigned long nop_insn[3] = {INSN_NOP, INSN_NOP, INSN_NOP};
-	unsigned long call_insn[3] = {INSN_NOP, INSN_NOP, INSN_NOP};
-
-	ftrace_gen_call_insn(call_insn, (unsigned long)ftrace_graph_caller);
-
-	if (enable)
-		return ftrace_modify_code(pc, nop_insn, call_insn, true);
-	else
-		return ftrace_modify_code(pc, call_insn, nop_insn, true);
-}
-
-int ftrace_enable_ftrace_graph_caller(void)
-{
-	return ftrace_modify_graph_caller(true);
-}
-
-int ftrace_disable_ftrace_graph_caller(void)
-{
-	return ftrace_modify_graph_caller(false);
-}
-#endif /* CONFIG_DYNAMIC_FTRACE */
-
-#endif /* CONFIG_FUNCTION_GRAPH_TRACER */
-
-
-#ifdef CONFIG_TRACE_IRQFLAGS
-noinline void __trace_hardirqs_off(void)
-{
-	trace_hardirqs_off();
-}
-noinline void __trace_hardirqs_on(void)
-{
-	trace_hardirqs_on();
-}
-#endif /* CONFIG_TRACE_IRQFLAGS */
diff --git a/arch/nds32/kernel/head.S b/arch/nds32/kernel/head.S
deleted file mode 100644
index 7347f00451a9..000000000000
--- a/arch/nds32/kernel/head.S
+++ /dev/null
@@ -1,197 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <linux/pgtable.h>
-#include <asm/ptrace.h>
-#include <asm/asm-offsets.h>
-#include <asm/page.h>
-#include <linux/sizes.h>
-#include <asm/thread_info.h>
-
-#ifdef CONFIG_CPU_BIG_ENDIAN
-#define OF_DT_MAGIC 0xd00dfeed
-#else
-#define OF_DT_MAGIC 0xedfe0dd0
-#endif
-
-	.globl  swapper_pg_dir
-	.equ    swapper_pg_dir, TEXTADDR - 0x4000
-
-/*
- * Kernel startup entry point.
- */
-	.section ".head.text", "ax"
-	.type   _stext, %function
-ENTRY(_stext)
-	setgie.d                            ! Disable interrupt
-	isb
-/*
- * Disable I/D-cache and enable it at a proper time
- */
-	mfsr    $r0, $mr8
-	li      $r1, #~(CACHE_CTL_mskIC_EN|CACHE_CTL_mskDC_EN)
-	and     $r0, $r0, $r1
-	mtsr    $r0, $mr8
-
-/*
- * Process device tree blob
- */
-	andi 	$r0,$r2,#0x3
-	li	$r10, 0
-	bne     $r0, $r10, _nodtb
-	lwi	$r0, [$r2]
-	li	$r1, OF_DT_MAGIC
-	bne     $r0, $r1, _nodtb
-	move	$r10, $r2
-_nodtb:
-
-/*
- * Create a temporary mapping area for booting, before start_kernel
- */
-	sethi   $r4, hi20(swapper_pg_dir)
-	li      $p0, (PAGE_OFFSET - PHYS_OFFSET)
-	sub     $r4, $r4, $p0
-	tlbop   FlushAll            ! invalidate TLB\n"
-	isb
-	mtsr    $r4, $L1_PPTB       ! load page table pointer\n"
-
-#ifdef CONFIG_CPU_DCACHE_DISABLE
-	#define MMU_CTL_NTCC MMU_CTL_CACHEABLE_NON
-#else
-	#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-		#define MMU_CTL_NTCC MMU_CTL_CACHEABLE_WT
-	#else
-		#define MMU_CTL_NTCC MMU_CTL_CACHEABLE_WB
-	#endif
-#endif
-
-/* set NTC cacheability, mutliple page size in use */
-	mfsr    $r3, $MMU_CTL
-#if CONFIG_MEMORY_START >= 0xc0000000
-	ori     $r3, $r3, (MMU_CTL_NTCC << MMU_CTL_offNTC3)
-#elif CONFIG_MEMORY_START >= 0x80000000
-	ori     $r3, $r3, (MMU_CTL_NTCC << MMU_CTL_offNTC2)
-#elif CONFIG_MEMORY_START >= 0x40000000
-	ori     $r3, $r3, (MMU_CTL_NTCC << MMU_CTL_offNTC1)
-#else
-	ori     $r3, $r3, (MMU_CTL_NTCC << MMU_CTL_offNTC0)
-#endif
-
-#ifdef CONFIG_ANDES_PAGE_SIZE_4KB
-	ori     $r3, $r3, #(MMU_CTL_mskMPZIU)
-#else
-	ori     $r3, $r3, #(MMU_CTL_mskMPZIU|MMU_CTL_D8KB)
-#endif
-#ifdef CONFIG_HW_SUPPORT_UNALIGNMENT_ACCESS
-	li      $r0, #MMU_CTL_UNA
-	or      $r3, $r3, $r0
-#endif
-	mtsr    $r3, $MMU_CTL
-	isb
-
-/* set page size and size of kernel image */
-        mfsr    $r0, $MMU_CFG
-        srli    $r3, $r0, MMU_CFG_offfEPSZ
-        zeb     $r3, $r3
-        bnez    $r3, _extra_page_size_support
-#ifdef CONFIG_ANDES_PAGE_SIZE_4KB
-        li      $r5, #SZ_4K                 ! Use 4KB page size
-#else
-        li      $r5, #SZ_8K                 ! Use 8KB page size
-        li      $r3, #1
-#endif
-        mtsr    $r3, $TLB_MISC
-        b       _image_size_check
-
-_extra_page_size_support:                    ! Use epzs pages size
-        clz     $r6, $r3
-        subri   $r2, $r6, #31
-        li      $r3, #1
-        sll     $r3, $r3, $r2
-        /* MMU_CFG.EPSZ value -> meaning */
-        mul     $r5, $r3, $r3
-        slli    $r5, $r5, #14
-        /* MMU_CFG.EPSZ  -> TLB_MISC.ACC_PSZ */
-        addi    $r3, $r2, #0x2
-        mtsr    $r3, $TLB_MISC
-
-_image_size_check:
-        /* calculate the image maximum size accepted by TLB config */
-        andi    $r6, $r0, MMU_CFG_mskTBW
-        andi    $r0, $r0, MMU_CFG_mskTBS
-        srli    $r6, $r6, MMU_CFG_offTBW
-        srli    $r0, $r0, MMU_CFG_offTBS
-	addi    $r6, $r6, #0x1               ! MMU_CFG.TBW value -> meaning
-        addi    $r0, $r0, #0x2               ! MMU_CFG.TBS value -> meaning
-        sll     $r0, $r6, $r0                ! entries = k-way * n-set
-        mul     $r6, $r0, $r5                ! max size = entries * page size
-        /* check kernel image size */
-        la      $r3, (_end - PAGE_OFFSET)
-        bgt     $r3, $r6, __error
-
-	li      $r2, #(PHYS_OFFSET + TLB_DATA_kernel_text_attr)
-        li      $r3, PAGE_OFFSET
-        add     $r6, $r6, $r3
-
-_tlb:
-	mtsr    $r3, $TLB_VPN
-	dsb
-	tlbop   $r2, RWR
-	isb
-	add     $r3, $r3, $r5
-	add     $r2, $r2, $r5
-	bgt     $r6, $r3, _tlb
-	mfsr    $r3, $TLB_MISC      ! setup access page size
-	li      $r2, #~0xf
-	and     $r3, $r3, $r2
-#ifdef CONFIG_ANDES_PAGE_SIZE_8KB
-	ori    $r3, $r3, #0x1
-#endif
-	mtsr    $r3, $TLB_MISC
-
-	mfsr    $r0, $MISC_CTL      ! Enable BTB, RTP, shadow sp, and HW_PRE
-	ori     $r0, $r0, #MISC_init
-	mtsr    $r0, $MISC_CTL
-
-	mfsr    $p1, $PSW
-	li      $r15, #~PSW_clr             ! clear WBNA|DME|IME|DT|IT|POM|INTL|GIE
-	and     $p1, $p1, $r15
-	ori     $p1, $p1, #PSW_init
-	mtsr    $p1, $IPSW                  ! when iret, it will automatically enable MMU
-	la      $lp, __mmap_switched
-	mtsr    $lp, $IPC
-	iret
-	nop
-
-	.type   __switch_data, %object
-__switch_data:
-	.long   __bss_start                 ! $r6
-	.long   _end                        ! $r7
-	.long	__atags_pointer 	    ! $atag_pointer
-	.long   init_task                   ! $r9, move to $r25
-	.long   init_thread_union + THREAD_SIZE    ! $sp
-
-
-/*
- * The following fragment of code is executed with the MMU on in MMU mode,
- * and uses absolute addresses; this is not position independent.
- */
-	.align
-	.type   __mmap_switched, %function
-__mmap_switched:
-	la  $r3, __switch_data
-	lmw.bim $r6, [$r3], $r9, #0b0001
-	move	$r25, $r9
-	move    $fp, #0             ! Clear  BSS (and zero $fp)
-	beq $r7, $r6, _RRT
-1:	swi.bi  $fp, [$r6], #4
-	bne $r7, $r6, 1b
-	swi	$r10, [$r8]
-
-_RRT:
-	b   start_kernel
-
-__error:
-	b   __error
diff --git a/arch/nds32/kernel/irq.c b/arch/nds32/kernel/irq.c
deleted file mode 100644
index 6ff5a672be27..000000000000
--- a/arch/nds32/kernel/irq.c
+++ /dev/null
@@ -1,9 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#include <linux/irqchip.h>
-
-void __init init_IRQ(void)
-{
-	irqchip_init();
-}
diff --git a/arch/nds32/kernel/module.c b/arch/nds32/kernel/module.c
deleted file mode 100644
index 3897fd14a21d..000000000000
--- a/arch/nds32/kernel/module.c
+++ /dev/null
@@ -1,278 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#include <linux/module.h>
-#include <linux/elf.h>
-#include <linux/vmalloc.h>
-#include <linux/moduleloader.h>
-#include <linux/pgtable.h>
-
-void *module_alloc(unsigned long size)
-{
-	return __vmalloc_node_range(size, 1, MODULES_VADDR, MODULES_END,
-				    GFP_KERNEL, PAGE_KERNEL, 0, NUMA_NO_NODE,
-				    __builtin_return_address(0));
-}
-
-void module_free(struct module *module, void *region)
-{
-	vfree(region);
-}
-
-int module_frob_arch_sections(Elf_Ehdr * hdr,
-			      Elf_Shdr * sechdrs,
-			      char *secstrings, struct module *mod)
-{
-	return 0;
-}
-
-void do_reloc16(unsigned int val, unsigned int *loc, unsigned int val_mask,
-		unsigned int val_shift, unsigned int loc_mask,
-		unsigned int partial_in_place, unsigned int swap)
-{
-	unsigned int tmp = 0, tmp2 = 0;
-
-	__asm__ __volatile__("\tlhi.bi\t%0, [%2], 0\n"
-			     "\tbeqz\t%3, 1f\n"
-			     "\twsbh\t%0, %1\n"
-			     "1:\n":"=r"(tmp):"0"(tmp), "r"(loc), "r"(swap)
-	    );
-
-	tmp2 = tmp & loc_mask;
-	if (partial_in_place) {
-		tmp &= (~loc_mask);
-		tmp =
-		    tmp2 | ((tmp + ((val & val_mask) >> val_shift)) & val_mask);
-	} else {
-		tmp = tmp2 | ((val & val_mask) >> val_shift);
-	}
-
-	__asm__ __volatile__("\tbeqz\t%3, 2f\n"
-			     "\twsbh\t%0, %1\n"
-			     "2:\n"
-			     "\tshi.bi\t%0, [%2], 0\n":"=r"(tmp):"0"(tmp),
-			     "r"(loc), "r"(swap)
-	    );
-}
-
-void do_reloc32(unsigned int val, unsigned int *loc, unsigned int val_mask,
-		unsigned int val_shift, unsigned int loc_mask,
-		unsigned int partial_in_place, unsigned int swap)
-{
-	unsigned int tmp = 0, tmp2 = 0;
-
-	__asm__ __volatile__("\tlmw.bi\t%0, [%2], %0, 0\n"
-			     "\tbeqz\t%3, 1f\n"
-			     "\twsbh\t%0, %1\n"
-			     "\trotri\t%0, %1, 16\n"
-			     "1:\n":"=r"(tmp):"0"(tmp), "r"(loc), "r"(swap)
-	    );
-
-	tmp2 = tmp & loc_mask;
-	if (partial_in_place) {
-		tmp &= (~loc_mask);
-		tmp =
-		    tmp2 | ((tmp + ((val & val_mask) >> val_shift)) & val_mask);
-	} else {
-		tmp = tmp2 | ((val & val_mask) >> val_shift);
-	}
-
-	__asm__ __volatile__("\tbeqz\t%3, 2f\n"
-			     "\twsbh\t%0, %1\n"
-			     "\trotri\t%0, %1, 16\n"
-			     "2:\n"
-			     "\tsmw.bi\t%0, [%2], %0, 0\n":"=r"(tmp):"0"(tmp),
-			     "r"(loc), "r"(swap)
-	    );
-}
-
-static inline int exceed_limit(int offset, unsigned int val_mask,
-			       struct module *module, Elf32_Rela * rel,
-			       unsigned int relindex, unsigned int reloc_order)
-{
-	int abs_off = offset < 0 ? ~offset : offset;
-
-	if (abs_off & (~val_mask)) {
-		pr_err("\n%s: relocation type %d out of range.\n"
-		       "please rebuild the kernel module with gcc option \"-Wa,-mno-small-text\".\n",
-		       module->name, ELF32_R_TYPE(rel->r_info));
-		pr_err("section %d reloc %d offset 0x%x relative 0x%x.\n",
-		       relindex, reloc_order, rel->r_offset, offset);
-		return true;
-	}
-	return false;
-}
-
-#ifdef __NDS32_EL__
-#define NEED_SWAP 1
-#else
-#define NEED_SWAP 0
-#endif
-
-int
-apply_relocate_add(Elf32_Shdr * sechdrs, const char *strtab,
-		   unsigned int symindex, unsigned int relindex,
-		   struct module *module)
-{
-	Elf32_Shdr *symsec = sechdrs + symindex;
-	Elf32_Shdr *relsec = sechdrs + relindex;
-	Elf32_Shdr *dstsec = sechdrs + relsec->sh_info;
-	Elf32_Rela *rel = (void *)relsec->sh_addr;
-	unsigned int i;
-
-	for (i = 0; i < relsec->sh_size / sizeof(Elf32_Rela); i++, rel++) {
-		Elf32_Addr *loc;
-		Elf32_Sym *sym;
-		Elf32_Addr v;
-		s32 offset;
-
-		offset = ELF32_R_SYM(rel->r_info);
-		if (offset < 0
-		    || offset > (symsec->sh_size / sizeof(Elf32_Sym))) {
-			pr_err("%s: bad relocation\n", module->name);
-			pr_err("section %d reloc %d\n", relindex, i);
-			return -ENOEXEC;
-		}
-
-		sym = ((Elf32_Sym *) symsec->sh_addr) + offset;
-
-		if (rel->r_offset < 0
-		    || rel->r_offset > dstsec->sh_size - sizeof(u16)) {
-			pr_err("%s: out of bounds relocation\n", module->name);
-			pr_err("section %d reloc %d offset 0x%0x size %d\n",
-			       relindex, i, rel->r_offset, dstsec->sh_size);
-			return -ENOEXEC;
-		}
-
-		loc = (Elf32_Addr *) (dstsec->sh_addr + rel->r_offset);
-		v = sym->st_value + rel->r_addend;
-
-		switch (ELF32_R_TYPE(rel->r_info)) {
-		case R_NDS32_NONE:
-		case R_NDS32_INSN16:
-		case R_NDS32_LABEL:
-		case R_NDS32_LONGCALL1:
-		case R_NDS32_LONGCALL2:
-		case R_NDS32_LONGCALL3:
-		case R_NDS32_LONGCALL4:
-		case R_NDS32_LONGJUMP1:
-		case R_NDS32_LONGJUMP2:
-		case R_NDS32_LONGJUMP3:
-		case R_NDS32_9_FIXED_RELA:
-		case R_NDS32_15_FIXED_RELA:
-		case R_NDS32_17_FIXED_RELA:
-		case R_NDS32_25_FIXED_RELA:
-		case R_NDS32_LOADSTORE:
-		case R_NDS32_DWARF2_OP1_RELA:
-		case R_NDS32_DWARF2_OP2_RELA:
-		case R_NDS32_DWARF2_LEB_RELA:
-		case R_NDS32_RELA_NOP_MIX ... R_NDS32_RELA_NOP_MAX:
-			break;
-
-		case R_NDS32_32_RELA:
-			do_reloc32(v, loc, 0xffffffff, 0, 0, 0, 0);
-			break;
-
-		case R_NDS32_HI20_RELA:
-			do_reloc32(v, loc, 0xfffff000, 12, 0xfff00000, 0,
-				   NEED_SWAP);
-			break;
-
-		case R_NDS32_LO12S3_RELA:
-			do_reloc32(v, loc, 0x00000fff, 3, 0xfffff000, 0,
-				   NEED_SWAP);
-			break;
-
-		case R_NDS32_LO12S2_RELA:
-			do_reloc32(v, loc, 0x00000fff, 2, 0xfffff000, 0,
-				   NEED_SWAP);
-			break;
-
-		case R_NDS32_LO12S1_RELA:
-			do_reloc32(v, loc, 0x00000fff, 1, 0xfffff000, 0,
-				   NEED_SWAP);
-			break;
-
-		case R_NDS32_LO12S0_RELA:
-		case R_NDS32_LO12S0_ORI_RELA:
-			do_reloc32(v, loc, 0x00000fff, 0, 0xfffff000, 0,
-				   NEED_SWAP);
-			break;
-
-		case R_NDS32_9_PCREL_RELA:
-			if (exceed_limit
-			    ((v - (Elf32_Addr) loc), 0x000000ff, module, rel,
-			     relindex, i))
-				return -ENOEXEC;
-			do_reloc16(v - (Elf32_Addr) loc, loc, 0x000001ff, 1,
-				   0xffffff00, 0, NEED_SWAP);
-			break;
-
-		case R_NDS32_15_PCREL_RELA:
-			if (exceed_limit
-			    ((v - (Elf32_Addr) loc), 0x00003fff, module, rel,
-			     relindex, i))
-				return -ENOEXEC;
-			do_reloc32(v - (Elf32_Addr) loc, loc, 0x00007fff, 1,
-				   0xffffc000, 0, NEED_SWAP);
-			break;
-
-		case R_NDS32_17_PCREL_RELA:
-			if (exceed_limit
-			    ((v - (Elf32_Addr) loc), 0x0000ffff, module, rel,
-			     relindex, i))
-				return -ENOEXEC;
-			do_reloc32(v - (Elf32_Addr) loc, loc, 0x0001ffff, 1,
-				   0xffff0000, 0, NEED_SWAP);
-			break;
-
-		case R_NDS32_25_PCREL_RELA:
-			if (exceed_limit
-			    ((v - (Elf32_Addr) loc), 0x00ffffff, module, rel,
-			     relindex, i))
-				return -ENOEXEC;
-			do_reloc32(v - (Elf32_Addr) loc, loc, 0x01ffffff, 1,
-				   0xff000000, 0, NEED_SWAP);
-			break;
-		case R_NDS32_WORD_9_PCREL_RELA:
-			if (exceed_limit
-			    ((v - (Elf32_Addr) loc), 0x000000ff, module, rel,
-			     relindex, i))
-				return -ENOEXEC;
-			do_reloc32(v - (Elf32_Addr) loc, loc, 0x000001ff, 1,
-				   0xffffff00, 0, NEED_SWAP);
-			break;
-
-		case R_NDS32_SDA15S3_RELA:
-		case R_NDS32_SDA15S2_RELA:
-		case R_NDS32_SDA15S1_RELA:
-		case R_NDS32_SDA15S0_RELA:
-			pr_err("%s: unsupported relocation type %d.\n",
-			       module->name, ELF32_R_TYPE(rel->r_info));
-			pr_err
-			    ("Small data section access doesn't work in the kernel space; "
-			     "please rebuild the kernel module with gcc option -mcmodel=large.\n");
-			pr_err("section %d reloc %d offset 0x%x size %d\n",
-			       relindex, i, rel->r_offset, dstsec->sh_size);
-			break;
-
-		default:
-			pr_err("%s: unsupported relocation type %d.\n",
-			       module->name, ELF32_R_TYPE(rel->r_info));
-			pr_err("section %d reloc %d offset 0x%x size %d\n",
-			       relindex, i, rel->r_offset, dstsec->sh_size);
-		}
-	}
-	return 0;
-}
-
-int
-module_finalize(const Elf32_Ehdr * hdr, const Elf_Shdr * sechdrs,
-		struct module *module)
-{
-	return 0;
-}
-
-void module_arch_cleanup(struct module *mod)
-{
-}
diff --git a/arch/nds32/kernel/nds32_ksyms.c b/arch/nds32/kernel/nds32_ksyms.c
deleted file mode 100644
index 20719e42ae36..000000000000
--- a/arch/nds32/kernel/nds32_ksyms.c
+++ /dev/null
@@ -1,25 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/delay.h>
-#include <linux/in6.h>
-#include <linux/syscalls.h>
-#include <linux/uaccess.h>
-
-#include <asm/checksum.h>
-#include <asm/io.h>
-#include <asm/ftrace.h>
-#include <asm/proc-fns.h>
-
-/* mem functions */
-EXPORT_SYMBOL(memset);
-EXPORT_SYMBOL(memcpy);
-EXPORT_SYMBOL(memmove);
-EXPORT_SYMBOL(memzero);
-
-/* user mem (segment) */
-EXPORT_SYMBOL(__arch_copy_from_user);
-EXPORT_SYMBOL(__arch_copy_to_user);
-EXPORT_SYMBOL(__arch_clear_user);
diff --git a/arch/nds32/kernel/perf_event_cpu.c b/arch/nds32/kernel/perf_event_cpu.c
deleted file mode 100644
index a78a879e7ef1..000000000000
--- a/arch/nds32/kernel/perf_event_cpu.c
+++ /dev/null
@@ -1,1500 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright (C) 2008-2017 Andes Technology Corporation
- *
- * Reference ARMv7: Jean Pihet <jpihet@mvista.com>
- * 2010 (c) MontaVista Software, LLC.
- */
-
-#include <linux/perf_event.h>
-#include <linux/bitmap.h>
-#include <linux/export.h>
-#include <linux/kernel.h>
-#include <linux/of.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/pm_runtime.h>
-#include <linux/ftrace.h>
-#include <linux/uaccess.h>
-#include <linux/sched/clock.h>
-#include <linux/percpu-defs.h>
-
-#include <asm/pmu.h>
-#include <asm/irq_regs.h>
-#include <asm/nds32.h>
-#include <asm/stacktrace.h>
-#include <asm/perf_event.h>
-#include <nds32_intrinsic.h>
-
-/* Set at runtime when we know what CPU type we are. */
-static struct nds32_pmu *cpu_pmu;
-
-static DEFINE_PER_CPU(struct pmu_hw_events, cpu_hw_events);
-static void nds32_pmu_start(struct nds32_pmu *cpu_pmu);
-static void nds32_pmu_stop(struct nds32_pmu *cpu_pmu);
-static struct platform_device_id cpu_pmu_plat_device_ids[] = {
-	{.name = "nds32-pfm"},
-	{},
-};
-
-static int nds32_pmu_map_cache_event(const unsigned int (*cache_map)
-				  [PERF_COUNT_HW_CACHE_MAX]
-				  [PERF_COUNT_HW_CACHE_OP_MAX]
-				  [PERF_COUNT_HW_CACHE_RESULT_MAX], u64 config)
-{
-	unsigned int cache_type, cache_op, cache_result, ret;
-
-	cache_type = (config >> 0) & 0xff;
-	if (cache_type >= PERF_COUNT_HW_CACHE_MAX)
-		return -EINVAL;
-
-	cache_op = (config >> 8) & 0xff;
-	if (cache_op >= PERF_COUNT_HW_CACHE_OP_MAX)
-		return -EINVAL;
-
-	cache_result = (config >> 16) & 0xff;
-	if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
-		return -EINVAL;
-
-	ret = (int)(*cache_map)[cache_type][cache_op][cache_result];
-
-	if (ret == CACHE_OP_UNSUPPORTED)
-		return -ENOENT;
-
-	return ret;
-}
-
-static int
-nds32_pmu_map_hw_event(const unsigned int (*event_map)[PERF_COUNT_HW_MAX],
-		       u64 config)
-{
-	int mapping;
-
-	if (config >= PERF_COUNT_HW_MAX)
-		return -ENOENT;
-
-	mapping = (*event_map)[config];
-	return mapping == HW_OP_UNSUPPORTED ? -ENOENT : mapping;
-}
-
-static int nds32_pmu_map_raw_event(u32 raw_event_mask, u64 config)
-{
-	int ev_type = (int)(config & raw_event_mask);
-	int idx = config >> 8;
-
-	switch (idx) {
-	case 0:
-		ev_type = PFM_OFFSET_MAGIC_0 + ev_type;
-		if (ev_type >= SPAV3_0_SEL_LAST || ev_type <= SPAV3_0_SEL_BASE)
-			return -ENOENT;
-		break;
-	case 1:
-		ev_type = PFM_OFFSET_MAGIC_1 + ev_type;
-		if (ev_type >= SPAV3_1_SEL_LAST || ev_type <= SPAV3_1_SEL_BASE)
-			return -ENOENT;
-		break;
-	case 2:
-		ev_type = PFM_OFFSET_MAGIC_2 + ev_type;
-		if (ev_type >= SPAV3_2_SEL_LAST || ev_type <= SPAV3_2_SEL_BASE)
-			return -ENOENT;
-		break;
-	default:
-		return -ENOENT;
-	}
-
-	return ev_type;
-}
-
-int
-nds32_pmu_map_event(struct perf_event *event,
-		    const unsigned int (*event_map)[PERF_COUNT_HW_MAX],
-		    const unsigned int (*cache_map)
-		    [PERF_COUNT_HW_CACHE_MAX]
-		    [PERF_COUNT_HW_CACHE_OP_MAX]
-		    [PERF_COUNT_HW_CACHE_RESULT_MAX], u32 raw_event_mask)
-{
-	u64 config = event->attr.config;
-
-	switch (event->attr.type) {
-	case PERF_TYPE_HARDWARE:
-		return nds32_pmu_map_hw_event(event_map, config);
-	case PERF_TYPE_HW_CACHE:
-		return nds32_pmu_map_cache_event(cache_map, config);
-	case PERF_TYPE_RAW:
-		return nds32_pmu_map_raw_event(raw_event_mask, config);
-	}
-
-	return -ENOENT;
-}
-
-static int nds32_spav3_map_event(struct perf_event *event)
-{
-	return nds32_pmu_map_event(event, &nds32_pfm_perf_map,
-				&nds32_pfm_perf_cache_map, SOFTWARE_EVENT_MASK);
-}
-
-static inline u32 nds32_pfm_getreset_flags(void)
-{
-	/* Read overflow status */
-	u32 val = __nds32__mfsr(NDS32_SR_PFM_CTL);
-	u32 old_val = val;
-
-	/* Write overflow bit to clear status, and others keep it 0 */
-	u32 ov_flag = PFM_CTL_OVF[0] | PFM_CTL_OVF[1] | PFM_CTL_OVF[2];
-
-	__nds32__mtsr(val | ov_flag, NDS32_SR_PFM_CTL);
-
-	return old_val;
-}
-
-static inline int nds32_pfm_has_overflowed(u32 pfm)
-{
-	u32 ov_flag = PFM_CTL_OVF[0] | PFM_CTL_OVF[1] | PFM_CTL_OVF[2];
-
-	return pfm & ov_flag;
-}
-
-static inline int nds32_pfm_counter_has_overflowed(u32 pfm, int idx)
-{
-	u32 mask = 0;
-
-	switch (idx) {
-	case 0:
-		mask = PFM_CTL_OVF[0];
-		break;
-	case 1:
-		mask = PFM_CTL_OVF[1];
-		break;
-	case 2:
-		mask = PFM_CTL_OVF[2];
-		break;
-	default:
-		pr_err("%s index wrong\n", __func__);
-		break;
-	}
-	return pfm & mask;
-}
-
-/*
- * Set the next IRQ period, based on the hwc->period_left value.
- * To be called with the event disabled in hw:
- */
-int nds32_pmu_event_set_period(struct perf_event *event)
-{
-	struct nds32_pmu *nds32_pmu = to_nds32_pmu(event->pmu);
-	struct hw_perf_event *hwc = &event->hw;
-	s64 left = local64_read(&hwc->period_left);
-	s64 period = hwc->sample_period;
-	int ret = 0;
-
-	/* The period may have been changed by PERF_EVENT_IOC_PERIOD */
-	if (unlikely(period != hwc->last_period))
-		left = period - (hwc->last_period - left);
-
-	if (unlikely(left <= -period)) {
-		left = period;
-		local64_set(&hwc->period_left, left);
-		hwc->last_period = period;
-		ret = 1;
-	}
-
-	if (unlikely(left <= 0)) {
-		left += period;
-		local64_set(&hwc->period_left, left);
-		hwc->last_period = period;
-		ret = 1;
-	}
-
-	if (left > (s64)nds32_pmu->max_period)
-		left = nds32_pmu->max_period;
-
-	/*
-	 * The hw event starts counting from this event offset,
-	 * mark it to be able to extract future "deltas":
-	 */
-	local64_set(&hwc->prev_count, (u64)(-left));
-
-	nds32_pmu->write_counter(event, (u64)(-left) & nds32_pmu->max_period);
-
-	perf_event_update_userpage(event);
-
-	return ret;
-}
-
-static irqreturn_t nds32_pmu_handle_irq(int irq_num, void *dev)
-{
-	u32 pfm;
-	struct perf_sample_data data;
-	struct nds32_pmu *cpu_pmu = (struct nds32_pmu *)dev;
-	struct pmu_hw_events *cpuc = cpu_pmu->get_hw_events();
-	struct pt_regs *regs;
-	int idx;
-	/*
-	 * Get and reset the IRQ flags
-	 */
-	pfm = nds32_pfm_getreset_flags();
-
-	/*
-	 * Did an overflow occur?
-	 */
-	if (!nds32_pfm_has_overflowed(pfm))
-		return IRQ_NONE;
-
-	/*
-	 * Handle the counter(s) overflow(s)
-	 */
-	regs = get_irq_regs();
-
-	nds32_pmu_stop(cpu_pmu);
-	for (idx = 0; idx < cpu_pmu->num_events; ++idx) {
-		struct perf_event *event = cpuc->events[idx];
-		struct hw_perf_event *hwc;
-
-		/* Ignore if we don't have an event. */
-		if (!event)
-			continue;
-
-		/*
-		 * We have a single interrupt for all counters. Check that
-		 * each counter has overflowed before we process it.
-		 */
-		if (!nds32_pfm_counter_has_overflowed(pfm, idx))
-			continue;
-
-		hwc = &event->hw;
-		nds32_pmu_event_update(event);
-		perf_sample_data_init(&data, 0, hwc->last_period);
-		if (!nds32_pmu_event_set_period(event))
-			continue;
-
-		if (perf_event_overflow(event, &data, regs))
-			cpu_pmu->disable(event);
-	}
-	nds32_pmu_start(cpu_pmu);
-	/*
-	 * Handle the pending perf events.
-	 *
-	 * Note: this call *must* be run with interrupts disabled. For
-	 * platforms that can have the PMU interrupts raised as an NMI, this
-	 * will not work.
-	 */
-	irq_work_run();
-
-	return IRQ_HANDLED;
-}
-
-static inline int nds32_pfm_counter_valid(struct nds32_pmu *cpu_pmu, int idx)
-{
-	return ((idx >= 0) && (idx < cpu_pmu->num_events));
-}
-
-static inline int nds32_pfm_disable_counter(int idx)
-{
-	unsigned int val = __nds32__mfsr(NDS32_SR_PFM_CTL);
-	u32 mask = 0;
-
-	mask = PFM_CTL_EN[idx];
-	val &= ~mask;
-	val &= ~(PFM_CTL_OVF[0] | PFM_CTL_OVF[1] | PFM_CTL_OVF[2]);
-	__nds32__mtsr_isb(val, NDS32_SR_PFM_CTL);
-	return idx;
-}
-
-/*
- * Add an event filter to a given event.
- */
-static int nds32_pmu_set_event_filter(struct hw_perf_event *event,
-				      struct perf_event_attr *attr)
-{
-	unsigned long config_base = 0;
-	int idx = event->idx;
-	unsigned long no_kernel_tracing = 0;
-	unsigned long no_user_tracing = 0;
-	/* If index is -1, do not do anything */
-	if (idx == -1)
-		return 0;
-
-	no_kernel_tracing = PFM_CTL_KS[idx];
-	no_user_tracing = PFM_CTL_KU[idx];
-	/*
-	 * Default: enable both kernel and user mode tracing.
-	 */
-	if (attr->exclude_user)
-		config_base |= no_user_tracing;
-
-	if (attr->exclude_kernel)
-		config_base |= no_kernel_tracing;
-
-	/*
-	 * Install the filter into config_base as this is used to
-	 * construct the event type.
-	 */
-	event->config_base |= config_base;
-	return 0;
-}
-
-static inline void nds32_pfm_write_evtsel(int idx, u32 evnum)
-{
-	u32 offset = 0;
-	u32 ori_val = __nds32__mfsr(NDS32_SR_PFM_CTL);
-	u32 ev_mask = 0;
-	u32 no_kernel_mask = 0;
-	u32 no_user_mask = 0;
-	u32 val;
-
-	offset = PFM_CTL_OFFSEL[idx];
-	/* Clear previous mode selection, and write new one */
-	no_kernel_mask = PFM_CTL_KS[idx];
-	no_user_mask = PFM_CTL_KU[idx];
-	ori_val &= ~no_kernel_mask;
-	ori_val &= ~no_user_mask;
-	if (evnum & no_kernel_mask)
-		ori_val |= no_kernel_mask;
-
-	if (evnum & no_user_mask)
-		ori_val |= no_user_mask;
-
-	/* Clear previous event selection */
-	ev_mask = PFM_CTL_SEL[idx];
-	ori_val &= ~ev_mask;
-	evnum &= SOFTWARE_EVENT_MASK;
-
-	/* undo the linear mapping */
-	evnum = get_converted_evet_hw_num(evnum);
-	val = ori_val | (evnum << offset);
-	val &= ~(PFM_CTL_OVF[0] | PFM_CTL_OVF[1] | PFM_CTL_OVF[2]);
-	__nds32__mtsr_isb(val, NDS32_SR_PFM_CTL);
-}
-
-static inline int nds32_pfm_enable_counter(int idx)
-{
-	unsigned int val = __nds32__mfsr(NDS32_SR_PFM_CTL);
-	u32 mask = 0;
-
-	mask = PFM_CTL_EN[idx];
-	val |= mask;
-	val &= ~(PFM_CTL_OVF[0] | PFM_CTL_OVF[1] | PFM_CTL_OVF[2]);
-	__nds32__mtsr_isb(val, NDS32_SR_PFM_CTL);
-	return idx;
-}
-
-static inline int nds32_pfm_enable_intens(int idx)
-{
-	unsigned int val = __nds32__mfsr(NDS32_SR_PFM_CTL);
-	u32 mask = 0;
-
-	mask = PFM_CTL_IE[idx];
-	val |= mask;
-	val &= ~(PFM_CTL_OVF[0] | PFM_CTL_OVF[1] | PFM_CTL_OVF[2]);
-	__nds32__mtsr_isb(val, NDS32_SR_PFM_CTL);
-	return idx;
-}
-
-static inline int nds32_pfm_disable_intens(int idx)
-{
-	unsigned int val = __nds32__mfsr(NDS32_SR_PFM_CTL);
-	u32 mask = 0;
-
-	mask = PFM_CTL_IE[idx];
-	val &= ~mask;
-	val &= ~(PFM_CTL_OVF[0] | PFM_CTL_OVF[1] | PFM_CTL_OVF[2]);
-	__nds32__mtsr_isb(val, NDS32_SR_PFM_CTL);
-	return idx;
-}
-
-static int event_requires_mode_exclusion(struct perf_event_attr *attr)
-{
-	/* Other modes NDS32 does not support */
-	return attr->exclude_user || attr->exclude_kernel;
-}
-
-static void nds32_pmu_enable_event(struct perf_event *event)
-{
-	unsigned long flags;
-	unsigned int evnum = 0;
-	struct hw_perf_event *hwc = &event->hw;
-	struct nds32_pmu *cpu_pmu = to_nds32_pmu(event->pmu);
-	struct pmu_hw_events *events = cpu_pmu->get_hw_events();
-	int idx = hwc->idx;
-
-	if (!nds32_pfm_counter_valid(cpu_pmu, idx)) {
-		pr_err("CPU enabling wrong pfm counter IRQ enable\n");
-		return;
-	}
-
-	/*
-	 * Enable counter and interrupt, and set the counter to count
-	 * the event that we're interested in.
-	 */
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
-
-	/*
-	 * Disable counter
-	 */
-	nds32_pfm_disable_counter(idx);
-
-	/*
-	 * Check whether we need to exclude the counter from certain modes.
-	 */
-	if ((!cpu_pmu->set_event_filter ||
-	     cpu_pmu->set_event_filter(hwc, &event->attr)) &&
-	     event_requires_mode_exclusion(&event->attr)) {
-		pr_notice
-		("NDS32 performance counters do not support mode exclusion\n");
-		hwc->config_base = 0;
-	}
-	/* Write event */
-	evnum = hwc->config_base;
-	nds32_pfm_write_evtsel(idx, evnum);
-
-	/*
-	 * Enable interrupt for this counter
-	 */
-	nds32_pfm_enable_intens(idx);
-
-	/*
-	 * Enable counter
-	 */
-	nds32_pfm_enable_counter(idx);
-
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
-}
-
-static void nds32_pmu_disable_event(struct perf_event *event)
-{
-	unsigned long flags;
-	struct hw_perf_event *hwc = &event->hw;
-	struct nds32_pmu *cpu_pmu = to_nds32_pmu(event->pmu);
-	struct pmu_hw_events *events = cpu_pmu->get_hw_events();
-	int idx = hwc->idx;
-
-	if (!nds32_pfm_counter_valid(cpu_pmu, idx)) {
-		pr_err("CPU disabling wrong pfm counter IRQ enable %d\n", idx);
-		return;
-	}
-
-	/*
-	 * Disable counter and interrupt
-	 */
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
-
-	/*
-	 * Disable counter
-	 */
-	nds32_pfm_disable_counter(idx);
-
-	/*
-	 * Disable interrupt for this counter
-	 */
-	nds32_pfm_disable_intens(idx);
-
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
-}
-
-static inline u32 nds32_pmu_read_counter(struct perf_event *event)
-{
-	struct nds32_pmu *cpu_pmu = to_nds32_pmu(event->pmu);
-	struct hw_perf_event *hwc = &event->hw;
-	int idx = hwc->idx;
-	u32 count = 0;
-
-	if (!nds32_pfm_counter_valid(cpu_pmu, idx)) {
-		pr_err("CPU reading wrong counter %d\n", idx);
-	} else {
-		switch (idx) {
-		case PFMC0:
-			count = __nds32__mfsr(NDS32_SR_PFMC0);
-			break;
-		case PFMC1:
-			count = __nds32__mfsr(NDS32_SR_PFMC1);
-			break;
-		case PFMC2:
-			count = __nds32__mfsr(NDS32_SR_PFMC2);
-			break;
-		default:
-			pr_err
-			    ("%s: CPU has no performance counters %d\n",
-			     __func__, idx);
-		}
-	}
-	return count;
-}
-
-static inline void nds32_pmu_write_counter(struct perf_event *event, u32 value)
-{
-	struct nds32_pmu *cpu_pmu = to_nds32_pmu(event->pmu);
-	struct hw_perf_event *hwc = &event->hw;
-	int idx = hwc->idx;
-
-	if (!nds32_pfm_counter_valid(cpu_pmu, idx)) {
-		pr_err("CPU writing wrong counter %d\n", idx);
-	} else {
-		switch (idx) {
-		case PFMC0:
-			__nds32__mtsr_isb(value, NDS32_SR_PFMC0);
-			break;
-		case PFMC1:
-			__nds32__mtsr_isb(value, NDS32_SR_PFMC1);
-			break;
-		case PFMC2:
-			__nds32__mtsr_isb(value, NDS32_SR_PFMC2);
-			break;
-		default:
-			pr_err
-			    ("%s: CPU has no performance counters %d\n",
-			     __func__, idx);
-		}
-	}
-}
-
-static int nds32_pmu_get_event_idx(struct pmu_hw_events *cpuc,
-				   struct perf_event *event)
-{
-	int idx;
-	struct hw_perf_event *hwc = &event->hw;
-	/*
-	 * Current implementation maps cycles, instruction count and cache-miss
-	 * to specific counter.
-	 * However, multiple of the 3 counters are able to count these events.
-	 *
-	 *
-	 * SOFTWARE_EVENT_MASK mask for getting event num ,
-	 * This is defined by Jia-Rung, you can change the polocies.
-	 * However, do not exceed 8 bits. This is hardware specific.
-	 * The last number is SPAv3_2_SEL_LAST.
-	 */
-	unsigned long evtype = hwc->config_base & SOFTWARE_EVENT_MASK;
-
-	idx = get_converted_event_idx(evtype);
-	/*
-	 * Try to get the counter for correpsonding event
-	 */
-	if (evtype == SPAV3_0_SEL_TOTAL_CYCLES) {
-		if (!test_and_set_bit(idx, cpuc->used_mask))
-			return idx;
-		if (!test_and_set_bit(NDS32_IDX_COUNTER0, cpuc->used_mask))
-			return NDS32_IDX_COUNTER0;
-		if (!test_and_set_bit(NDS32_IDX_COUNTER1, cpuc->used_mask))
-			return NDS32_IDX_COUNTER1;
-	} else if (evtype == SPAV3_1_SEL_COMPLETED_INSTRUCTION) {
-		if (!test_and_set_bit(idx, cpuc->used_mask))
-			return idx;
-		else if (!test_and_set_bit(NDS32_IDX_COUNTER1, cpuc->used_mask))
-			return NDS32_IDX_COUNTER1;
-		else if (!test_and_set_bit
-			 (NDS32_IDX_CYCLE_COUNTER, cpuc->used_mask))
-			return NDS32_IDX_CYCLE_COUNTER;
-	} else {
-		if (!test_and_set_bit(idx, cpuc->used_mask))
-			return idx;
-	}
-	return -EAGAIN;
-}
-
-static void nds32_pmu_start(struct nds32_pmu *cpu_pmu)
-{
-	unsigned long flags;
-	unsigned int val;
-	struct pmu_hw_events *events = cpu_pmu->get_hw_events();
-
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
-
-	/* Enable all counters , NDS PFM has 3 counters */
-	val = __nds32__mfsr(NDS32_SR_PFM_CTL);
-	val |= (PFM_CTL_EN[0] | PFM_CTL_EN[1] | PFM_CTL_EN[2]);
-	val &= ~(PFM_CTL_OVF[0] | PFM_CTL_OVF[1] | PFM_CTL_OVF[2]);
-	__nds32__mtsr_isb(val, NDS32_SR_PFM_CTL);
-
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
-}
-
-static void nds32_pmu_stop(struct nds32_pmu *cpu_pmu)
-{
-	unsigned long flags;
-	unsigned int val;
-	struct pmu_hw_events *events = cpu_pmu->get_hw_events();
-
-	raw_spin_lock_irqsave(&events->pmu_lock, flags);
-
-	/* Disable all counters , NDS PFM has 3 counters */
-	val = __nds32__mfsr(NDS32_SR_PFM_CTL);
-	val &= ~(PFM_CTL_EN[0] | PFM_CTL_EN[1] | PFM_CTL_EN[2]);
-	val &= ~(PFM_CTL_OVF[0] | PFM_CTL_OVF[1] | PFM_CTL_OVF[2]);
-	__nds32__mtsr_isb(val, NDS32_SR_PFM_CTL);
-
-	raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
-}
-
-static void nds32_pmu_reset(void *info)
-{
-	u32 val = 0;
-
-	val |= (PFM_CTL_OVF[0] | PFM_CTL_OVF[1] | PFM_CTL_OVF[2]);
-	__nds32__mtsr(val, NDS32_SR_PFM_CTL);
-	__nds32__mtsr(0, NDS32_SR_PFM_CTL);
-	__nds32__mtsr(0, NDS32_SR_PFMC0);
-	__nds32__mtsr(0, NDS32_SR_PFMC1);
-	__nds32__mtsr(0, NDS32_SR_PFMC2);
-}
-
-static void nds32_pmu_init(struct nds32_pmu *cpu_pmu)
-{
-	cpu_pmu->handle_irq = nds32_pmu_handle_irq;
-	cpu_pmu->enable = nds32_pmu_enable_event;
-	cpu_pmu->disable = nds32_pmu_disable_event;
-	cpu_pmu->read_counter = nds32_pmu_read_counter;
-	cpu_pmu->write_counter = nds32_pmu_write_counter;
-	cpu_pmu->get_event_idx = nds32_pmu_get_event_idx;
-	cpu_pmu->start = nds32_pmu_start;
-	cpu_pmu->stop = nds32_pmu_stop;
-	cpu_pmu->reset = nds32_pmu_reset;
-	cpu_pmu->max_period = 0xFFFFFFFF;	/* Maximum counts */
-};
-
-static u32 nds32_read_num_pfm_events(void)
-{
-	/* NDS32 SPAv3 PMU support 3 counter */
-	return 3;
-}
-
-static int device_pmu_init(struct nds32_pmu *cpu_pmu)
-{
-	nds32_pmu_init(cpu_pmu);
-	/*
-	 * This name should be devive-specific name, whatever you like :)
-	 * I think "PMU" will be a good generic name.
-	 */
-	cpu_pmu->name = "nds32v3-pmu";
-	cpu_pmu->map_event = nds32_spav3_map_event;
-	cpu_pmu->num_events = nds32_read_num_pfm_events();
-	cpu_pmu->set_event_filter = nds32_pmu_set_event_filter;
-	return 0;
-}
-
-/*
- * CPU PMU identification and probing.
- */
-static int probe_current_pmu(struct nds32_pmu *pmu)
-{
-	int ret;
-
-	get_cpu();
-	ret = -ENODEV;
-	/*
-	 * If ther are various CPU types with its own PMU, initialize with
-	 *
-	 * the corresponding one
-	 */
-	device_pmu_init(pmu);
-	put_cpu();
-	return ret;
-}
-
-static void nds32_pmu_enable(struct pmu *pmu)
-{
-	struct nds32_pmu *nds32_pmu = to_nds32_pmu(pmu);
-	struct pmu_hw_events *hw_events = nds32_pmu->get_hw_events();
-	int enabled = bitmap_weight(hw_events->used_mask,
-				    nds32_pmu->num_events);
-
-	if (enabled)
-		nds32_pmu->start(nds32_pmu);
-}
-
-static void nds32_pmu_disable(struct pmu *pmu)
-{
-	struct nds32_pmu *nds32_pmu = to_nds32_pmu(pmu);
-
-	nds32_pmu->stop(nds32_pmu);
-}
-
-static void nds32_pmu_release_hardware(struct nds32_pmu *nds32_pmu)
-{
-	nds32_pmu->free_irq(nds32_pmu);
-	pm_runtime_put_sync(&nds32_pmu->plat_device->dev);
-}
-
-static irqreturn_t nds32_pmu_dispatch_irq(int irq, void *dev)
-{
-	struct nds32_pmu *nds32_pmu = (struct nds32_pmu *)dev;
-	int ret;
-	u64 start_clock, finish_clock;
-
-	start_clock = local_clock();
-	ret = nds32_pmu->handle_irq(irq, dev);
-	finish_clock = local_clock();
-
-	perf_sample_event_took(finish_clock - start_clock);
-	return ret;
-}
-
-static int nds32_pmu_reserve_hardware(struct nds32_pmu *nds32_pmu)
-{
-	int err;
-	struct platform_device *pmu_device = nds32_pmu->plat_device;
-
-	if (!pmu_device)
-		return -ENODEV;
-
-	pm_runtime_get_sync(&pmu_device->dev);
-	err = nds32_pmu->request_irq(nds32_pmu, nds32_pmu_dispatch_irq);
-	if (err) {
-		nds32_pmu_release_hardware(nds32_pmu);
-		return err;
-	}
-
-	return 0;
-}
-
-static int
-validate_event(struct pmu *pmu, struct pmu_hw_events *hw_events,
-	       struct perf_event *event)
-{
-	struct nds32_pmu *nds32_pmu = to_nds32_pmu(event->pmu);
-
-	if (is_software_event(event))
-		return 1;
-
-	if (event->pmu != pmu)
-		return 0;
-
-	if (event->state < PERF_EVENT_STATE_OFF)
-		return 1;
-
-	if (event->state == PERF_EVENT_STATE_OFF && !event->attr.enable_on_exec)
-		return 1;
-
-	return nds32_pmu->get_event_idx(hw_events, event) >= 0;
-}
-
-static int validate_group(struct perf_event *event)
-{
-	struct perf_event *sibling, *leader = event->group_leader;
-	struct pmu_hw_events fake_pmu;
-	DECLARE_BITMAP(fake_used_mask, MAX_COUNTERS);
-	/*
-	 * Initialize the fake PMU. We only need to populate the
-	 * used_mask for the purposes of validation.
-	 */
-	memset(fake_used_mask, 0, sizeof(fake_used_mask));
-
-	if (!validate_event(event->pmu, &fake_pmu, leader))
-		return -EINVAL;
-
-	for_each_sibling_event(sibling, leader) {
-		if (!validate_event(event->pmu, &fake_pmu, sibling))
-			return -EINVAL;
-	}
-
-	if (!validate_event(event->pmu, &fake_pmu, event))
-		return -EINVAL;
-
-	return 0;
-}
-
-static int __hw_perf_event_init(struct perf_event *event)
-{
-	struct nds32_pmu *nds32_pmu = to_nds32_pmu(event->pmu);
-	struct hw_perf_event *hwc = &event->hw;
-	int mapping;
-
-	mapping = nds32_pmu->map_event(event);
-
-	if (mapping < 0) {
-		pr_debug("event %x:%llx not supported\n", event->attr.type,
-			 event->attr.config);
-		return mapping;
-	}
-
-	/*
-	 * We don't assign an index until we actually place the event onto
-	 * hardware. Use -1 to signify that we haven't decided where to put it
-	 * yet. For SMP systems, each core has it's own PMU so we can't do any
-	 * clever allocation or constraints checking at this point.
-	 */
-	hwc->idx = -1;
-	hwc->config_base = 0;
-	hwc->config = 0;
-	hwc->event_base = 0;
-
-	/*
-	 * Check whether we need to exclude the counter from certain modes.
-	 */
-	if ((!nds32_pmu->set_event_filter ||
-	     nds32_pmu->set_event_filter(hwc, &event->attr)) &&
-	    event_requires_mode_exclusion(&event->attr)) {
-		pr_debug
-			("NDS performance counters do not support mode exclusion\n");
-		return -EOPNOTSUPP;
-	}
-
-	/*
-	 * Store the event encoding into the config_base field.
-	 */
-	hwc->config_base |= (unsigned long)mapping;
-
-	if (!hwc->sample_period) {
-		/*
-		 * For non-sampling runs, limit the sample_period to half
-		 * of the counter width. That way, the new counter value
-		 * is far less likely to overtake the previous one unless
-		 * you have some serious IRQ latency issues.
-		 */
-		hwc->sample_period = nds32_pmu->max_period >> 1;
-		hwc->last_period = hwc->sample_period;
-		local64_set(&hwc->period_left, hwc->sample_period);
-	}
-
-	if (event->group_leader != event) {
-		if (validate_group(event) != 0)
-			return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int nds32_pmu_event_init(struct perf_event *event)
-{
-	struct nds32_pmu *nds32_pmu = to_nds32_pmu(event->pmu);
-	int err = 0;
-	atomic_t *active_events = &nds32_pmu->active_events;
-
-	/* does not support taken branch sampling */
-	if (has_branch_stack(event))
-		return -EOPNOTSUPP;
-
-	if (nds32_pmu->map_event(event) == -ENOENT)
-		return -ENOENT;
-
-	if (!atomic_inc_not_zero(active_events)) {
-		if (atomic_read(active_events) == 0) {
-			/* Register irq handler */
-			err = nds32_pmu_reserve_hardware(nds32_pmu);
-		}
-
-		if (!err)
-			atomic_inc(active_events);
-	}
-
-	if (err)
-		return err;
-
-	err = __hw_perf_event_init(event);
-
-	return err;
-}
-
-static void nds32_start(struct perf_event *event, int flags)
-{
-	struct nds32_pmu *nds32_pmu = to_nds32_pmu(event->pmu);
-	struct hw_perf_event *hwc = &event->hw;
-	/*
-	 * NDS pmu always has to reprogram the period, so ignore
-	 * PERF_EF_RELOAD, see the comment below.
-	 */
-	if (flags & PERF_EF_RELOAD)
-		WARN_ON_ONCE(!(hwc->state & PERF_HES_UPTODATE));
-
-	hwc->state = 0;
-	/* Set the period for the event. */
-	nds32_pmu_event_set_period(event);
-
-	nds32_pmu->enable(event);
-}
-
-static int nds32_pmu_add(struct perf_event *event, int flags)
-{
-	struct nds32_pmu *nds32_pmu = to_nds32_pmu(event->pmu);
-	struct pmu_hw_events *hw_events = nds32_pmu->get_hw_events();
-	struct hw_perf_event *hwc = &event->hw;
-	int idx;
-	int err = 0;
-
-	perf_pmu_disable(event->pmu);
-
-	/* If we don't have a space for the counter then finish early. */
-	idx = nds32_pmu->get_event_idx(hw_events, event);
-	if (idx < 0) {
-		err = idx;
-		goto out;
-	}
-
-	/*
-	 * If there is an event in the counter we are going to use then make
-	 * sure it is disabled.
-	 */
-	event->hw.idx = idx;
-	nds32_pmu->disable(event);
-	hw_events->events[idx] = event;
-
-	hwc->state = PERF_HES_STOPPED | PERF_HES_UPTODATE;
-	if (flags & PERF_EF_START)
-		nds32_start(event, PERF_EF_RELOAD);
-
-	/* Propagate our changes to the userspace mapping. */
-	perf_event_update_userpage(event);
-
-out:
-	perf_pmu_enable(event->pmu);
-	return err;
-}
-
-u64 nds32_pmu_event_update(struct perf_event *event)
-{
-	struct nds32_pmu *nds32_pmu = to_nds32_pmu(event->pmu);
-	struct hw_perf_event *hwc = &event->hw;
-	u64 delta, prev_raw_count, new_raw_count;
-
-again:
-	prev_raw_count = local64_read(&hwc->prev_count);
-	new_raw_count = nds32_pmu->read_counter(event);
-
-	if (local64_cmpxchg(&hwc->prev_count, prev_raw_count,
-			    new_raw_count) != prev_raw_count) {
-		goto again;
-	}
-	/*
-	 * Whether overflow or not, "unsigned substraction"
-	 * will always get their delta
-	 */
-	delta = (new_raw_count - prev_raw_count) & nds32_pmu->max_period;
-
-	local64_add(delta, &event->count);
-	local64_sub(delta, &hwc->period_left);
-
-	return new_raw_count;
-}
-
-static void nds32_stop(struct perf_event *event, int flags)
-{
-	struct nds32_pmu *nds32_pmu = to_nds32_pmu(event->pmu);
-	struct hw_perf_event *hwc = &event->hw;
-	/*
-	 * NDS pmu always has to update the counter, so ignore
-	 * PERF_EF_UPDATE, see comments in nds32_start().
-	 */
-	if (!(hwc->state & PERF_HES_STOPPED)) {
-		nds32_pmu->disable(event);
-		nds32_pmu_event_update(event);
-		hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE;
-	}
-}
-
-static void nds32_pmu_del(struct perf_event *event, int flags)
-{
-	struct nds32_pmu *nds32_pmu = to_nds32_pmu(event->pmu);
-	struct pmu_hw_events *hw_events = nds32_pmu->get_hw_events();
-	struct hw_perf_event *hwc = &event->hw;
-	int idx = hwc->idx;
-
-	nds32_stop(event, PERF_EF_UPDATE);
-	hw_events->events[idx] = NULL;
-	clear_bit(idx, hw_events->used_mask);
-
-	perf_event_update_userpage(event);
-}
-
-static void nds32_pmu_read(struct perf_event *event)
-{
-	nds32_pmu_event_update(event);
-}
-
-/* Please refer to SPAv3 for more hardware specific details */
-PMU_FORMAT_ATTR(event, "config:0-63");
-
-static struct attribute *nds32_arch_formats_attr[] = {
-	&format_attr_event.attr,
-	NULL,
-};
-
-static struct attribute_group nds32_pmu_format_group = {
-	.name = "format",
-	.attrs = nds32_arch_formats_attr,
-};
-
-static ssize_t nds32_pmu_cpumask_show(struct device *dev,
-				      struct device_attribute *attr,
-				      char *buf)
-{
-	return 0;
-}
-
-static DEVICE_ATTR(cpus, 0444, nds32_pmu_cpumask_show, NULL);
-
-static struct attribute *nds32_pmu_common_attrs[] = {
-	&dev_attr_cpus.attr,
-	NULL,
-};
-
-static struct attribute_group nds32_pmu_common_group = {
-	.attrs = nds32_pmu_common_attrs,
-};
-
-static const struct attribute_group *nds32_pmu_attr_groups[] = {
-	&nds32_pmu_format_group,
-	&nds32_pmu_common_group,
-	NULL,
-};
-
-static void nds32_init(struct nds32_pmu *nds32_pmu)
-{
-	atomic_set(&nds32_pmu->active_events, 0);
-
-	nds32_pmu->pmu = (struct pmu) {
-		.pmu_enable = nds32_pmu_enable,
-		.pmu_disable = nds32_pmu_disable,
-		.attr_groups = nds32_pmu_attr_groups,
-		.event_init = nds32_pmu_event_init,
-		.add = nds32_pmu_add,
-		.del = nds32_pmu_del,
-		.start = nds32_start,
-		.stop = nds32_stop,
-		.read = nds32_pmu_read,
-	};
-}
-
-int nds32_pmu_register(struct nds32_pmu *nds32_pmu, int type)
-{
-	nds32_init(nds32_pmu);
-	pm_runtime_enable(&nds32_pmu->plat_device->dev);
-	pr_info("enabled with %s PMU driver, %d counters available\n",
-		nds32_pmu->name, nds32_pmu->num_events);
-	return perf_pmu_register(&nds32_pmu->pmu, nds32_pmu->name, type);
-}
-
-static struct pmu_hw_events *cpu_pmu_get_cpu_events(void)
-{
-	return this_cpu_ptr(&cpu_hw_events);
-}
-
-static int cpu_pmu_request_irq(struct nds32_pmu *cpu_pmu, irq_handler_t handler)
-{
-	int err, irq, irqs;
-	struct platform_device *pmu_device = cpu_pmu->plat_device;
-
-	if (!pmu_device)
-		return -ENODEV;
-
-	irqs = min(pmu_device->num_resources, num_possible_cpus());
-	if (irqs < 1) {
-		pr_err("no irqs for PMUs defined\n");
-		return -ENODEV;
-	}
-
-	irq = platform_get_irq(pmu_device, 0);
-	err = request_irq(irq, handler, IRQF_NOBALANCING, "nds32-pfm",
-			  cpu_pmu);
-	if (err) {
-		pr_err("unable to request IRQ%d for NDS PMU counters\n",
-		       irq);
-		return err;
-	}
-	return 0;
-}
-
-static void cpu_pmu_free_irq(struct nds32_pmu *cpu_pmu)
-{
-	int irq;
-	struct platform_device *pmu_device = cpu_pmu->plat_device;
-
-	irq = platform_get_irq(pmu_device, 0);
-	if (irq >= 0)
-		free_irq(irq, cpu_pmu);
-}
-
-static void cpu_pmu_init(struct nds32_pmu *cpu_pmu)
-{
-	int cpu;
-	struct pmu_hw_events *events = &per_cpu(cpu_hw_events, cpu);
-
-	raw_spin_lock_init(&events->pmu_lock);
-
-	cpu_pmu->get_hw_events = cpu_pmu_get_cpu_events;
-	cpu_pmu->request_irq = cpu_pmu_request_irq;
-	cpu_pmu->free_irq = cpu_pmu_free_irq;
-
-	/* Ensure the PMU has sane values out of reset. */
-	if (cpu_pmu->reset)
-		on_each_cpu(cpu_pmu->reset, cpu_pmu, 1);
-}
-
-static const struct of_device_id cpu_pmu_of_device_ids[] = {
-	{.compatible = "andestech,nds32v3-pmu",
-	 .data = device_pmu_init},
-	{},
-};
-
-static int cpu_pmu_device_probe(struct platform_device *pdev)
-{
-	const struct of_device_id *of_id;
-	int (*init_fn)(struct nds32_pmu *nds32_pmu);
-	struct device_node *node = pdev->dev.of_node;
-	struct nds32_pmu *pmu;
-	int ret = -ENODEV;
-
-	if (cpu_pmu) {
-		pr_notice("[perf] attempt to register multiple PMU devices!\n");
-		return -ENOSPC;
-	}
-
-	pmu = kzalloc(sizeof(*pmu), GFP_KERNEL);
-	if (!pmu)
-		return -ENOMEM;
-
-	of_id = of_match_node(cpu_pmu_of_device_ids, pdev->dev.of_node);
-	if (node && of_id) {
-		init_fn = of_id->data;
-		ret = init_fn(pmu);
-	} else {
-		ret = probe_current_pmu(pmu);
-	}
-
-	if (ret) {
-		pr_notice("[perf] failed to probe PMU!\n");
-		goto out_free;
-	}
-
-	cpu_pmu = pmu;
-	cpu_pmu->plat_device = pdev;
-	cpu_pmu_init(cpu_pmu);
-	ret = nds32_pmu_register(cpu_pmu, PERF_TYPE_RAW);
-
-	if (!ret)
-		return 0;
-
-out_free:
-	pr_notice("[perf] failed to register PMU devices!\n");
-	kfree(pmu);
-	return ret;
-}
-
-static struct platform_driver cpu_pmu_driver = {
-	.driver = {
-		   .name = "nds32-pfm",
-		   .of_match_table = cpu_pmu_of_device_ids,
-		   },
-	.probe = cpu_pmu_device_probe,
-	.id_table = cpu_pmu_plat_device_ids,
-};
-
-static int __init register_pmu_driver(void)
-{
-	int err = 0;
-
-	err = platform_driver_register(&cpu_pmu_driver);
-	if (err)
-		pr_notice("[perf] PMU initialization failed\n");
-	else
-		pr_notice("[perf] PMU initialization done\n");
-
-	return err;
-}
-
-device_initcall(register_pmu_driver);
-
-/*
- * References: arch/nds32/kernel/traps.c:__dump()
- * You will need to know the NDS ABI first.
- */
-static int unwind_frame_kernel(struct stackframe *frame)
-{
-	int graph = 0;
-#ifdef CONFIG_FRAME_POINTER
-	/* 0x3 means misalignment */
-	if (!kstack_end((void *)frame->fp) &&
-	    !((unsigned long)frame->fp & 0x3) &&
-	    ((unsigned long)frame->fp >= TASK_SIZE)) {
-		/*
-		 *	The array index is based on the ABI, the below graph
-		 *	illustrate the reasons.
-		 *	Function call procedure: "smw" and "lmw" will always
-		 *	update SP and FP for you automatically.
-		 *
-		 *	Stack                                 Relative Address
-		 *	|  |                                          0
-		 *	----
-		 *	|LP| <-- SP(before smw)  <-- FP(after smw)   -1
-		 *	----
-		 *	|FP|                                         -2
-		 *	----
-		 *	|  | <-- SP(after smw)                       -3
-		 */
-		frame->lp = ((unsigned long *)frame->fp)[-1];
-		frame->fp = ((unsigned long *)frame->fp)[FP_OFFSET];
-		/* make sure CONFIG_FUNCTION_GRAPH_TRACER is turned on */
-		if (__kernel_text_address(frame->lp))
-			frame->lp = ftrace_graph_ret_addr
-						(NULL, &graph, frame->lp, NULL);
-
-		return 0;
-	} else {
-		return -EPERM;
-	}
-#else
-	/*
-	 * You can refer to arch/nds32/kernel/traps.c:__dump()
-	 * Treat "sp" as "fp", but the "sp" is one frame ahead of "fp".
-	 * And, the "sp" is not always correct.
-	 *
-	 *   Stack                                 Relative Address
-	 *   |  |                                          0
-	 *   ----
-	 *   |LP| <-- SP(before smw)                      -1
-	 *   ----
-	 *   |  | <-- SP(after smw)                       -2
-	 *   ----
-	 */
-	if (!kstack_end((void *)frame->sp)) {
-		frame->lp = ((unsigned long *)frame->sp)[1];
-		/* TODO: How to deal with the value in first
-		 * "sp" is not correct?
-		 */
-		if (__kernel_text_address(frame->lp))
-			frame->lp = ftrace_graph_ret_addr
-						(tsk, &graph, frame->lp, NULL);
-
-		frame->sp = ((unsigned long *)frame->sp) + 1;
-
-		return 0;
-	} else {
-		return -EPERM;
-	}
-#endif
-}
-
-static void notrace
-walk_stackframe(struct stackframe *frame,
-		int (*fn_record)(struct stackframe *, void *),
-		void *data)
-{
-	while (1) {
-		int ret;
-
-		if (fn_record(frame, data))
-			break;
-
-		ret = unwind_frame_kernel(frame);
-		if (ret < 0)
-			break;
-	}
-}
-
-/*
- * Gets called by walk_stackframe() for every stackframe. This will be called
- * whist unwinding the stackframe and is like a subroutine return so we use
- * the PC.
- */
-static int callchain_trace(struct stackframe *fr, void *data)
-{
-	struct perf_callchain_entry_ctx *entry = data;
-
-	perf_callchain_store(entry, fr->lp);
-	return 0;
-}
-
-/*
- * Get the return address for a single stackframe and return a pointer to the
- * next frame tail.
- */
-static unsigned long
-user_backtrace(struct perf_callchain_entry_ctx *entry, unsigned long fp)
-{
-	struct frame_tail buftail;
-	unsigned long lp = 0;
-	unsigned long *user_frame_tail =
-		(unsigned long *)(fp - (unsigned long)sizeof(buftail));
-
-	/* Check accessibility of one struct frame_tail beyond */
-	if (!access_ok(user_frame_tail, sizeof(buftail)))
-		return 0;
-	if (__copy_from_user_inatomic
-		(&buftail, user_frame_tail, sizeof(buftail)))
-		return 0;
-
-	/*
-	 * Refer to unwind_frame_kernel() for more illurstration
-	 */
-	lp = buftail.stack_lp;  /* ((unsigned long *)fp)[-1] */
-	fp = buftail.stack_fp;  /* ((unsigned long *)fp)[FP_OFFSET] */
-	perf_callchain_store(entry, lp);
-	return fp;
-}
-
-static unsigned long
-user_backtrace_opt_size(struct perf_callchain_entry_ctx *entry,
-			unsigned long fp)
-{
-	struct frame_tail_opt_size buftail;
-	unsigned long lp = 0;
-
-	unsigned long *user_frame_tail =
-		(unsigned long *)(fp - (unsigned long)sizeof(buftail));
-
-	/* Check accessibility of one struct frame_tail beyond */
-	if (!access_ok(user_frame_tail, sizeof(buftail)))
-		return 0;
-	if (__copy_from_user_inatomic
-		(&buftail, user_frame_tail, sizeof(buftail)))
-		return 0;
-
-	/*
-	 * Refer to unwind_frame_kernel() for more illurstration
-	 */
-	lp = buftail.stack_lp;  /* ((unsigned long *)fp)[-1] */
-	fp = buftail.stack_fp;  /* ((unsigned long *)fp)[FP_OFFSET] */
-
-	perf_callchain_store(entry, lp);
-	return fp;
-}
-
-/*
- * This will be called when the target is in user mode
- * This function will only be called when we use
- * "PERF_SAMPLE_CALLCHAIN" in
- * kernel/events/core.c:perf_prepare_sample()
- *
- * How to trigger perf_callchain_[user/kernel] :
- * $ perf record -e cpu-clock --call-graph fp ./program
- * $ perf report --call-graph
- */
-unsigned long leaf_fp;
-void
-perf_callchain_user(struct perf_callchain_entry_ctx *entry,
-		    struct pt_regs *regs)
-{
-	unsigned long fp = 0;
-	unsigned long gp = 0;
-	unsigned long lp = 0;
-	unsigned long sp = 0;
-	unsigned long *user_frame_tail;
-
-	leaf_fp = 0;
-
-	perf_callchain_store(entry, regs->ipc);
-	fp = regs->fp;
-	gp = regs->gp;
-	lp = regs->lp;
-	sp = regs->sp;
-	if (entry->nr < PERF_MAX_STACK_DEPTH &&
-	    (unsigned long)fp && !((unsigned long)fp & 0x7) && fp > sp) {
-		user_frame_tail =
-			(unsigned long *)(fp - (unsigned long)sizeof(fp));
-
-		if (!access_ok(user_frame_tail, sizeof(fp)))
-			return;
-
-		if (__copy_from_user_inatomic
-			(&leaf_fp, user_frame_tail, sizeof(fp)))
-			return;
-
-		if (leaf_fp == lp) {
-			/*
-			 * Maybe this is non leaf function
-			 * with optimize for size,
-			 * or maybe this is the function
-			 * with optimize for size
-			 */
-			struct frame_tail buftail;
-
-			user_frame_tail =
-				(unsigned long *)(fp -
-					(unsigned long)sizeof(buftail));
-
-			if (!access_ok(user_frame_tail, sizeof(buftail)))
-				return;
-
-			if (__copy_from_user_inatomic
-				(&buftail, user_frame_tail, sizeof(buftail)))
-				return;
-
-			if (buftail.stack_fp == gp) {
-				/* non leaf function with optimize
-				 * for size condition
-				 */
-				struct frame_tail_opt_size buftail_opt_size;
-
-				user_frame_tail =
-					(unsigned long *)(fp - (unsigned long)
-						sizeof(buftail_opt_size));
-
-				if (!access_ok(user_frame_tail,
-					       sizeof(buftail_opt_size)))
-					return;
-
-				if (__copy_from_user_inatomic
-				   (&buftail_opt_size, user_frame_tail,
-				   sizeof(buftail_opt_size)))
-					return;
-
-				perf_callchain_store(entry, lp);
-				fp = buftail_opt_size.stack_fp;
-
-				while ((entry->nr < PERF_MAX_STACK_DEPTH) &&
-				       (unsigned long)fp &&
-						!((unsigned long)fp & 0x7) &&
-						fp > sp) {
-					sp = fp;
-					fp = user_backtrace_opt_size(entry, fp);
-				}
-
-			} else {
-				/* this is the function
-				 * without optimize for size
-				 */
-				fp = buftail.stack_fp;
-				perf_callchain_store(entry, lp);
-				while ((entry->nr < PERF_MAX_STACK_DEPTH) &&
-				       (unsigned long)fp &&
-						!((unsigned long)fp & 0x7) &&
-						fp > sp) {
-					sp = fp;
-					fp = user_backtrace(entry, fp);
-				}
-			}
-		} else {
-			/* this is leaf function */
-			fp = leaf_fp;
-			perf_callchain_store(entry, lp);
-
-			/* previous function callcahin  */
-			while ((entry->nr < PERF_MAX_STACK_DEPTH) &&
-			       (unsigned long)fp &&
-				   !((unsigned long)fp & 0x7) && fp > sp) {
-				sp = fp;
-				fp = user_backtrace(entry, fp);
-			}
-		}
-		return;
-	}
-}
-
-/* This will be called when the target is in kernel mode */
-void
-perf_callchain_kernel(struct perf_callchain_entry_ctx *entry,
-		      struct pt_regs *regs)
-{
-	struct stackframe fr;
-
-	fr.fp = regs->fp;
-	fr.lp = regs->lp;
-	fr.sp = regs->sp;
-	walk_stackframe(&fr, callchain_trace, entry);
-}
-
-unsigned long perf_instruction_pointer(struct pt_regs *regs)
-{
-	return instruction_pointer(regs);
-}
-
-unsigned long perf_misc_flags(struct pt_regs *regs)
-{
-	int misc = 0;
-
-	if (user_mode(regs))
-		misc |= PERF_RECORD_MISC_USER;
-	else
-		misc |= PERF_RECORD_MISC_KERNEL;
-
-	return misc;
-}
diff --git a/arch/nds32/kernel/pm.c b/arch/nds32/kernel/pm.c
deleted file mode 100644
index e25700e125d8..000000000000
--- a/arch/nds32/kernel/pm.c
+++ /dev/null
@@ -1,80 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2008-2017 Andes Technology Corporation
-
-#include <linux/init.h>
-#include <linux/suspend.h>
-#include <linux/device.h>
-#include <linux/printk.h>
-#include <asm/suspend.h>
-#include <nds32_intrinsic.h>
-
-unsigned int resume_addr;
-unsigned int *phy_addr_sp_tmp;
-
-static void nds32_suspend2ram(void)
-{
-	pgd_t *pgdv;
-	p4d_t *p4dv;
-	pud_t *pudv;
-	pmd_t *pmdv;
-	pte_t *ptev;
-
-	pgdv = (pgd_t *)__va((__nds32__mfsr(NDS32_SR_L1_PPTB) &
-		L1_PPTB_mskBASE)) + pgd_index((unsigned int)cpu_resume);
-
-	p4dv = p4d_offset(pgdv, (unsigned int)cpu_resume);
-	pudv = pud_offset(p4dv, (unsigned int)cpu_resume);
-	pmdv = pmd_offset(pudv, (unsigned int)cpu_resume);
-	ptev = pte_offset_map(pmdv, (unsigned int)cpu_resume);
-
-	resume_addr = ((*ptev) & TLB_DATA_mskPPN)
-			| ((unsigned int)cpu_resume & 0x00000fff);
-
-	suspend2ram();
-}
-
-static void nds32_suspend_cpu(void)
-{
-	while (!(__nds32__mfsr(NDS32_SR_INT_PEND) & wake_mask))
-		__asm__ volatile ("standby no_wake_grant\n\t");
-}
-
-static int nds32_pm_valid(suspend_state_t state)
-{
-	switch (state) {
-	case PM_SUSPEND_ON:
-	case PM_SUSPEND_STANDBY:
-	case PM_SUSPEND_MEM:
-		return 1;
-	default:
-		return 0;
-	}
-}
-
-static int nds32_pm_enter(suspend_state_t state)
-{
-	pr_debug("%s:state:%d\n", __func__, state);
-	switch (state) {
-	case PM_SUSPEND_STANDBY:
-		nds32_suspend_cpu();
-		return 0;
-	case PM_SUSPEND_MEM:
-		nds32_suspend2ram();
-		return 0;
-	default:
-		return -EINVAL;
-	}
-}
-
-static const struct platform_suspend_ops nds32_pm_ops = {
-	.valid = nds32_pm_valid,
-	.enter = nds32_pm_enter,
-};
-
-static int __init nds32_pm_init(void)
-{
-	pr_debug("Enter %s\n", __func__);
-	suspend_set_ops(&nds32_pm_ops);
-	return 0;
-}
-late_initcall(nds32_pm_init);
diff --git a/arch/nds32/kernel/process.c b/arch/nds32/kernel/process.c
deleted file mode 100644
index 49fab9e39cbf..000000000000
--- a/arch/nds32/kernel/process.c
+++ /dev/null
@@ -1,257 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#include <linux/sched.h>
-#include <linux/sched/debug.h>
-#include <linux/sched/task_stack.h>
-#include <linux/delay.h>
-#include <linux/kallsyms.h>
-#include <linux/uaccess.h>
-#include <asm/elf.h>
-#include <asm/proc-fns.h>
-#include <asm/fpu.h>
-#include <linux/ptrace.h>
-#include <linux/reboot.h>
-
-#if IS_ENABLED(CONFIG_LAZY_FPU)
-struct task_struct *last_task_used_math;
-#endif
-
-extern void setup_mm_for_reboot(char mode);
-
-extern inline void arch_reset(char mode)
-{
-	if (mode == 's') {
-		/* Use cpu handler, jump to 0 */
-		cpu_reset(0);
-	}
-}
-
-void (*pm_power_off) (void);
-EXPORT_SYMBOL(pm_power_off);
-
-static char reboot_mode_nds32 = 'h';
-
-int __init reboot_setup(char *str)
-{
-	reboot_mode_nds32 = str[0];
-	return 1;
-}
-
-static int cpub_pwroff(void)
-{
-	return 0;
-}
-
-__setup("reboot=", reboot_setup);
-
-void machine_halt(void)
-{
-	cpub_pwroff();
-}
-
-EXPORT_SYMBOL(machine_halt);
-
-void machine_power_off(void)
-{
-	if (pm_power_off)
-		pm_power_off();
-}
-
-EXPORT_SYMBOL(machine_power_off);
-
-void machine_restart(char *cmd)
-{
-	/*
-	 * Clean and disable cache, and turn off interrupts
-	 */
-	cpu_proc_fin();
-
-	/*
-	 * Tell the mm system that we are going to reboot -
-	 * we may need it to insert some 1:1 mappings so that
-	 * soft boot works.
-	 */
-	setup_mm_for_reboot(reboot_mode_nds32);
-
-	/* Execute kernel restart handler call chain */
-	do_kernel_restart(cmd);
-
-	/*
-	 * Now call the architecture specific reboot code.
-	 */
-	arch_reset(reboot_mode_nds32);
-
-	/*
-	 * Whoops - the architecture was unable to reboot.
-	 * Tell the user!
-	 */
-	mdelay(1000);
-	pr_info("Reboot failed -- System halted\n");
-	while (1) ;
-}
-
-EXPORT_SYMBOL(machine_restart);
-
-void show_regs(struct pt_regs *regs)
-{
-	printk("PC is at %pS\n", (void *)instruction_pointer(regs));
-	printk("LP is at %pS\n", (void *)regs->lp);
-	pr_info("pc : [<%08lx>]    lp : [<%08lx>]    %s\n"
-		"sp : %08lx  fp : %08lx  gp : %08lx\n",
-		instruction_pointer(regs),
-		regs->lp, print_tainted(), regs->sp, regs->fp, regs->gp);
-	pr_info("r25: %08lx  r24: %08lx\n", regs->uregs[25], regs->uregs[24]);
-
-	pr_info("r23: %08lx  r22: %08lx  r21: %08lx  r20: %08lx\n",
-		regs->uregs[23], regs->uregs[22],
-		regs->uregs[21], regs->uregs[20]);
-	pr_info("r19: %08lx  r18: %08lx  r17: %08lx  r16: %08lx\n",
-		regs->uregs[19], regs->uregs[18],
-		regs->uregs[17], regs->uregs[16]);
-	pr_info("r15: %08lx  r14: %08lx  r13: %08lx  r12: %08lx\n",
-		regs->uregs[15], regs->uregs[14],
-		regs->uregs[13], regs->uregs[12]);
-	pr_info("r11: %08lx  r10: %08lx  r9 : %08lx  r8 : %08lx\n",
-		regs->uregs[11], regs->uregs[10],
-		regs->uregs[9], regs->uregs[8]);
-	pr_info("r7 : %08lx  r6 : %08lx  r5 : %08lx  r4 : %08lx\n",
-		regs->uregs[7], regs->uregs[6], regs->uregs[5], regs->uregs[4]);
-	pr_info("r3 : %08lx  r2 : %08lx  r1 : %08lx  r0 : %08lx\n",
-		regs->uregs[3], regs->uregs[2], regs->uregs[1], regs->uregs[0]);
-	pr_info("  IRQs o%s  Segment %s\n",
-		interrupts_enabled(regs) ? "n" : "ff",
-		uaccess_kernel() ? "kernel" : "user");
-}
-
-EXPORT_SYMBOL(show_regs);
-
-void exit_thread(struct task_struct *tsk)
-{
-#if defined(CONFIG_FPU) && defined(CONFIG_LAZY_FPU)
-	if (last_task_used_math == tsk)
-		last_task_used_math = NULL;
-#endif
-}
-
-void flush_thread(void)
-{
-#if defined(CONFIG_FPU)
-	clear_fpu(task_pt_regs(current));
-	clear_used_math();
-# ifdef CONFIG_LAZY_FPU
-	if (last_task_used_math == current)
-		last_task_used_math = NULL;
-# endif
-#endif
-}
-
-DEFINE_PER_CPU(struct task_struct *, __entry_task);
-
-asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");
-int copy_thread(unsigned long clone_flags, unsigned long stack_start,
-		unsigned long stk_sz, struct task_struct *p, unsigned long tls)
-{
-	struct pt_regs *childregs = task_pt_regs(p);
-
-	memset(&p->thread.cpu_context, 0, sizeof(struct cpu_context));
-
-	if (unlikely(p->flags & (PF_KTHREAD | PF_IO_WORKER))) {
-		memset(childregs, 0, sizeof(struct pt_regs));
-		/* kernel thread fn */
-		p->thread.cpu_context.r6 = stack_start;
-		/* kernel thread argument */
-		p->thread.cpu_context.r7 = stk_sz;
-	} else {
-		*childregs = *current_pt_regs();
-		if (stack_start)
-			childregs->sp = stack_start;
-		/* child get zero as ret. */
-		childregs->uregs[0] = 0;
-		childregs->osp = 0;
-		if (clone_flags & CLONE_SETTLS)
-			childregs->uregs[25] = tls;
-	}
-	/* cpu context switching  */
-	p->thread.cpu_context.pc = (unsigned long)ret_from_fork;
-	p->thread.cpu_context.sp = (unsigned long)childregs;
-
-#if IS_ENABLED(CONFIG_FPU)
-	if (used_math()) {
-# if !IS_ENABLED(CONFIG_LAZY_FPU)
-		unlazy_fpu(current);
-# else
-		preempt_disable();
-		if (last_task_used_math == current)
-			save_fpu(current);
-		preempt_enable();
-# endif
-		p->thread.fpu = current->thread.fpu;
-		clear_fpu(task_pt_regs(p));
-		set_stopped_child_used_math(p);
-	}
-#endif
-
-#ifdef CONFIG_HWZOL
-	childregs->lb = 0;
-	childregs->le = 0;
-	childregs->lc = 0;
-#endif
-
-	return 0;
-}
-
-#if IS_ENABLED(CONFIG_FPU)
-struct task_struct *_switch_fpu(struct task_struct *prev, struct task_struct *next)
-{
-#if !IS_ENABLED(CONFIG_LAZY_FPU)
-	unlazy_fpu(prev);
-#endif
-	if (!(next->flags & PF_KTHREAD))
-		clear_fpu(task_pt_regs(next));
-	return prev;
-}
-#endif
-
-/*
- * fill in the fpe structure for a core dump...
- */
-int dump_fpu(struct pt_regs *regs, elf_fpregset_t * fpu)
-{
-	int fpvalid = 0;
-#if IS_ENABLED(CONFIG_FPU)
-	struct task_struct *tsk = current;
-
-	fpvalid = tsk_used_math(tsk);
-	if (fpvalid) {
-		lose_fpu();
-		memcpy(fpu, &tsk->thread.fpu, sizeof(*fpu));
-	}
-#endif
-	return fpvalid;
-}
-
-EXPORT_SYMBOL(dump_fpu);
-
-unsigned long __get_wchan(struct task_struct *p)
-{
-	unsigned long fp, lr;
-	unsigned long stack_start, stack_end;
-	int count = 0;
-
-	if (IS_ENABLED(CONFIG_FRAME_POINTER)) {
-		stack_start = (unsigned long)end_of_stack(p);
-		stack_end = (unsigned long)task_stack_page(p) + THREAD_SIZE;
-
-		fp = thread_saved_fp(p);
-		do {
-			if (fp < stack_start || fp > stack_end)
-				return 0;
-			lr = ((unsigned long *)fp)[0];
-			if (!in_sched_functions(lr))
-				return lr;
-			fp = *(unsigned long *)(fp + 4);
-		} while (count++ < 16);
-	}
-	return 0;
-}
diff --git a/arch/nds32/kernel/ptrace.c b/arch/nds32/kernel/ptrace.c
deleted file mode 100644
index d0eda870fbc2..000000000000
--- a/arch/nds32/kernel/ptrace.c
+++ /dev/null
@@ -1,118 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#include <linux/ptrace.h>
-#include <linux/regset.h>
-#include <linux/tracehook.h>
-#include <linux/elf.h>
-#include <linux/sched/task_stack.h>
-
-enum nds32_regset {
-	REGSET_GPR,
-};
-
-static int gpr_get(struct task_struct *target,
-		   const struct user_regset *regset,
-		   struct membuf to)
-{
-	return membuf_write(&to, &task_pt_regs(target)->user_regs,
-				sizeof(struct user_pt_regs));
-}
-
-static int gpr_set(struct task_struct *target, const struct user_regset *regset,
-		   unsigned int pos, unsigned int count,
-		   const void *kbuf, const void __user * ubuf)
-{
-	int err;
-	struct user_pt_regs newregs = task_pt_regs(target)->user_regs;
-
-	err = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &newregs, 0, -1);
-	if (err)
-		return err;
-
-	task_pt_regs(target)->user_regs = newregs;
-	return 0;
-}
-
-static const struct user_regset nds32_regsets[] = {
-	[REGSET_GPR] = {
-			.core_note_type = NT_PRSTATUS,
-			.n = sizeof(struct user_pt_regs) / sizeof(u32),
-			.size = sizeof(elf_greg_t),
-			.align = sizeof(elf_greg_t),
-			.regset_get = gpr_get,
-			.set = gpr_set}
-};
-
-static const struct user_regset_view nds32_user_view = {
-	.name = "nds32",
-	.e_machine = EM_NDS32,
-	.regsets = nds32_regsets,
-	.n = ARRAY_SIZE(nds32_regsets)
-};
-
-const struct user_regset_view *task_user_regset_view(struct task_struct *task)
-{
-	return &nds32_user_view;
-}
-
-void ptrace_disable(struct task_struct *child)
-{
-	user_disable_single_step(child);
-}
-
-/* do_ptrace()
- *
- * Provide ptrace defined service.
- */
-long arch_ptrace(struct task_struct *child, long request, unsigned long addr,
-		 unsigned long data)
-{
-	int ret = -EIO;
-
-	switch (request) {
-	default:
-		ret = ptrace_request(child, request, addr, data);
-		break;
-	}
-
-	return ret;
-}
-
-void user_enable_single_step(struct task_struct *child)
-{
-	struct pt_regs *regs;
-	regs = task_pt_regs(child);
-	regs->ipsw |= PSW_mskHSS;
-	set_tsk_thread_flag(child, TIF_SINGLESTEP);
-}
-
-void user_disable_single_step(struct task_struct *child)
-{
-	struct pt_regs *regs;
-	regs = task_pt_regs(child);
-	regs->ipsw &= ~PSW_mskHSS;
-	clear_tsk_thread_flag(child, TIF_SINGLESTEP);
-}
-
-/* sys_trace()
- *
- * syscall trace handler.
- */
-
-asmlinkage int syscall_trace_enter(struct pt_regs *regs)
-{
-	if (test_thread_flag(TIF_SYSCALL_TRACE)) {
-		if (tracehook_report_syscall_entry(regs))
-			forget_syscall(regs);
-	}
-	return regs->syscallno;
-}
-
-asmlinkage void syscall_trace_leave(struct pt_regs *regs)
-{
-	int step = test_thread_flag(TIF_SINGLESTEP);
-	if (step || test_thread_flag(TIF_SYSCALL_TRACE))
-		tracehook_report_syscall_exit(regs, step);
-
-}
diff --git a/arch/nds32/kernel/setup.c b/arch/nds32/kernel/setup.c
deleted file mode 100644
index b3d34d646652..000000000000
--- a/arch/nds32/kernel/setup.c
+++ /dev/null
@@ -1,369 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#include <linux/cpu.h>
-#include <linux/memblock.h>
-#include <linux/seq_file.h>
-#include <linux/console.h>
-#include <linux/screen_info.h>
-#include <linux/delay.h>
-#include <linux/dma-mapping.h>
-#include <linux/of_fdt.h>
-#include <linux/of_platform.h>
-#include <asm/setup.h>
-#include <asm/sections.h>
-#include <asm/proc-fns.h>
-#include <asm/cache_info.h>
-#include <asm/elf.h>
-#include <asm/fpu.h>
-#include <nds32_intrinsic.h>
-
-#define HWCAP_MFUSR_PC		0x000001
-#define HWCAP_EXT		0x000002
-#define HWCAP_EXT2		0x000004
-#define HWCAP_FPU		0x000008
-#define HWCAP_AUDIO		0x000010
-#define HWCAP_BASE16		0x000020
-#define HWCAP_STRING		0x000040
-#define HWCAP_REDUCED_REGS	0x000080
-#define HWCAP_VIDEO		0x000100
-#define HWCAP_ENCRYPT		0x000200
-#define HWCAP_EDM		0x000400
-#define HWCAP_LMDMA		0x000800
-#define HWCAP_PFM		0x001000
-#define HWCAP_HSMP		0x002000
-#define HWCAP_TRACE		0x004000
-#define HWCAP_DIV		0x008000
-#define HWCAP_MAC		0x010000
-#define HWCAP_L2C		0x020000
-#define HWCAP_FPU_DP		0x040000
-#define HWCAP_V2		0x080000
-#define HWCAP_DX_REGS		0x100000
-#define HWCAP_HWPRE		0x200000
-
-unsigned long cpu_id, cpu_rev, cpu_cfgid;
-bool has_fpu = false;
-char cpu_series;
-char *endianness = NULL;
-
-unsigned int __atags_pointer __initdata;
-unsigned int elf_hwcap;
-EXPORT_SYMBOL(elf_hwcap);
-
-/*
- * The following string table, must sync with HWCAP_xx bitmask,
- * which is defined above
- */
-static const char *hwcap_str[] = {
-	"mfusr_pc",
-	"perf1",
-	"perf2",
-	"fpu",
-	"audio",
-	"16b",
-	"string",
-	"reduced_regs",
-	"video",
-	"encrypt",
-	"edm",
-	"lmdma",
-	"pfm",
-	"hsmp",
-	"trace",
-	"div",
-	"mac",
-	"l2c",
-	"fpu_dp",
-	"v2",
-	"dx_regs",
-	"hw_pre",
-	NULL,
-};
-
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-#define WRITE_METHOD "write through"
-#else
-#define WRITE_METHOD "write back"
-#endif
-
-struct cache_info L1_cache_info[2];
-static void __init dump_cpu_info(int cpu)
-{
-	int i, p = 0;
-	char str[sizeof(hwcap_str) + 16];
-
-	for (i = 0; hwcap_str[i]; i++) {
-		if (elf_hwcap & (1 << i)) {
-			sprintf(str + p, "%s ", hwcap_str[i]);
-			p += strlen(hwcap_str[i]) + 1;
-		}
-	}
-
-	pr_info("CPU%d Features: %s\n", cpu, str);
-
-	L1_cache_info[ICACHE].ways = CACHE_WAY(ICACHE);
-	L1_cache_info[ICACHE].line_size = CACHE_LINE_SIZE(ICACHE);
-	L1_cache_info[ICACHE].sets = CACHE_SET(ICACHE);
-	L1_cache_info[ICACHE].size =
-	    L1_cache_info[ICACHE].ways * L1_cache_info[ICACHE].line_size *
-	    L1_cache_info[ICACHE].sets / 1024;
-	pr_info("L1I:%dKB/%dS/%dW/%dB\n", L1_cache_info[ICACHE].size,
-		L1_cache_info[ICACHE].sets, L1_cache_info[ICACHE].ways,
-		L1_cache_info[ICACHE].line_size);
-	L1_cache_info[DCACHE].ways = CACHE_WAY(DCACHE);
-	L1_cache_info[DCACHE].line_size = CACHE_LINE_SIZE(DCACHE);
-	L1_cache_info[DCACHE].sets = CACHE_SET(DCACHE);
-	L1_cache_info[DCACHE].size =
-	    L1_cache_info[DCACHE].ways * L1_cache_info[DCACHE].line_size *
-	    L1_cache_info[DCACHE].sets / 1024;
-	pr_info("L1D:%dKB/%dS/%dW/%dB\n", L1_cache_info[DCACHE].size,
-		L1_cache_info[DCACHE].sets, L1_cache_info[DCACHE].ways,
-		L1_cache_info[DCACHE].line_size);
-	pr_info("L1 D-Cache is %s\n", WRITE_METHOD);
-	if (L1_cache_info[DCACHE].size != L1_CACHE_BYTES)
-		pr_crit
-		    ("The cache line size(%d) of this processor is not the same as L1_CACHE_BYTES(%d).\n",
-		     L1_cache_info[DCACHE].size, L1_CACHE_BYTES);
-#ifdef CONFIG_CPU_CACHE_ALIASING
-	{
-		int aliasing_num;
-		aliasing_num =
-		    L1_cache_info[ICACHE].size * 1024 / PAGE_SIZE /
-		    L1_cache_info[ICACHE].ways;
-		L1_cache_info[ICACHE].aliasing_num = aliasing_num;
-		L1_cache_info[ICACHE].aliasing_mask =
-		    (aliasing_num - 1) << PAGE_SHIFT;
-		aliasing_num =
-		    L1_cache_info[DCACHE].size * 1024 / PAGE_SIZE /
-		    L1_cache_info[DCACHE].ways;
-		L1_cache_info[DCACHE].aliasing_num = aliasing_num;
-		L1_cache_info[DCACHE].aliasing_mask =
-		    (aliasing_num - 1) << PAGE_SHIFT;
-	}
-#endif
-#ifdef CONFIG_FPU
-	/* Disable fpu and enable when it is used. */
-	if (has_fpu)
-		disable_fpu();
-#endif
-}
-
-static void __init setup_cpuinfo(void)
-{
-	unsigned long tmp = 0, cpu_name;
-
-	cpu_dcache_inval_all();
-	cpu_icache_inval_all();
-	__nds32__isb();
-
-	cpu_id = (__nds32__mfsr(NDS32_SR_CPU_VER) & CPU_VER_mskCPUID) >> CPU_VER_offCPUID;
-	cpu_name = ((cpu_id) & 0xf0) >> 4;
-	cpu_series = cpu_name ? cpu_name - 10 + 'A' : 'N';
-	cpu_id = cpu_id & 0xf;
-	cpu_rev = (__nds32__mfsr(NDS32_SR_CPU_VER) & CPU_VER_mskREV) >> CPU_VER_offREV;
-	cpu_cfgid = (__nds32__mfsr(NDS32_SR_CPU_VER) & CPU_VER_mskCFGID) >> CPU_VER_offCFGID;
-
-	pr_info("CPU:%c%ld, CPU_VER 0x%08x(id %lu, rev %lu, cfg %lu)\n",
-		cpu_series, cpu_id, __nds32__mfsr(NDS32_SR_CPU_VER), cpu_id, cpu_rev, cpu_cfgid);
-
-	elf_hwcap |= HWCAP_MFUSR_PC;
-
-	if (((__nds32__mfsr(NDS32_SR_MSC_CFG) & MSC_CFG_mskBASEV) >> MSC_CFG_offBASEV) == 0) {
-		if (__nds32__mfsr(NDS32_SR_MSC_CFG) & MSC_CFG_mskDIV)
-			elf_hwcap |= HWCAP_DIV;
-
-		if ((__nds32__mfsr(NDS32_SR_MSC_CFG) & MSC_CFG_mskMAC)
-		    || (cpu_id == 12 && cpu_rev < 4))
-			elf_hwcap |= HWCAP_MAC;
-	} else {
-		elf_hwcap |= HWCAP_V2;
-		elf_hwcap |= HWCAP_DIV;
-		elf_hwcap |= HWCAP_MAC;
-	}
-
-	if (cpu_cfgid & 0x0001)
-		elf_hwcap |= HWCAP_EXT;
-
-	if (cpu_cfgid & 0x0002)
-		elf_hwcap |= HWCAP_BASE16;
-
-	if (cpu_cfgid & 0x0004)
-		elf_hwcap |= HWCAP_EXT2;
-
-	if (cpu_cfgid & 0x0008) {
-		elf_hwcap |= HWCAP_FPU;
-		has_fpu = true;
-	}
-	if (cpu_cfgid & 0x0010)
-		elf_hwcap |= HWCAP_STRING;
-
-	if (__nds32__mfsr(NDS32_SR_MMU_CFG) & MMU_CFG_mskDE)
-		endianness = "MSB";
-	else
-		endianness = "LSB";
-
-	if (__nds32__mfsr(NDS32_SR_MSC_CFG) & MSC_CFG_mskEDM)
-		elf_hwcap |= HWCAP_EDM;
-
-	if (__nds32__mfsr(NDS32_SR_MSC_CFG) & MSC_CFG_mskLMDMA)
-		elf_hwcap |= HWCAP_LMDMA;
-
-	if (__nds32__mfsr(NDS32_SR_MSC_CFG) & MSC_CFG_mskPFM)
-		elf_hwcap |= HWCAP_PFM;
-
-	if (__nds32__mfsr(NDS32_SR_MSC_CFG) & MSC_CFG_mskHSMP)
-		elf_hwcap |= HWCAP_HSMP;
-
-	if (__nds32__mfsr(NDS32_SR_MSC_CFG) & MSC_CFG_mskTRACE)
-		elf_hwcap |= HWCAP_TRACE;
-
-	if (__nds32__mfsr(NDS32_SR_MSC_CFG) & MSC_CFG_mskAUDIO)
-		elf_hwcap |= HWCAP_AUDIO;
-
-	if (__nds32__mfsr(NDS32_SR_MSC_CFG) & MSC_CFG_mskL2C)
-		elf_hwcap |= HWCAP_L2C;
-
-#ifdef CONFIG_HW_PRE
-	if (__nds32__mfsr(NDS32_SR_MISC_CTL) & MISC_CTL_makHWPRE_EN)
-		elf_hwcap |= HWCAP_HWPRE;
-#endif
-
-	tmp = __nds32__mfsr(NDS32_SR_CACHE_CTL);
-	if (!IS_ENABLED(CONFIG_CPU_DCACHE_DISABLE))
-		tmp |= CACHE_CTL_mskDC_EN;
-
-	if (!IS_ENABLED(CONFIG_CPU_ICACHE_DISABLE))
-		tmp |= CACHE_CTL_mskIC_EN;
-	__nds32__mtsr_isb(tmp, NDS32_SR_CACHE_CTL);
-
-	dump_cpu_info(smp_processor_id());
-}
-
-static void __init setup_memory(void)
-{
-	unsigned long ram_start_pfn;
-	unsigned long free_ram_start_pfn;
-	phys_addr_t memory_start, memory_end;
-
-	memory_end = memory_start = 0;
-
-	/* Find main memory where is the kernel */
-	memory_start = memblock_start_of_DRAM();
-	memory_end = memblock_end_of_DRAM();
-
-	if (!memory_end) {
-		panic("No memory!");
-	}
-
-	ram_start_pfn = PFN_UP(memblock_start_of_DRAM());
-	/* free_ram_start_pfn is first page after kernel */
-	free_ram_start_pfn = PFN_UP(__pa(&_end));
-	max_pfn = PFN_DOWN(memblock_end_of_DRAM());
-	/* it could update max_pfn */
-	if (max_pfn - ram_start_pfn <= MAXMEM_PFN)
-		max_low_pfn = max_pfn;
-	else {
-		max_low_pfn = MAXMEM_PFN + ram_start_pfn;
-		if (!IS_ENABLED(CONFIG_HIGHMEM))
-			max_pfn = MAXMEM_PFN + ram_start_pfn;
-	}
-	/* high_memory is related with VMALLOC */
-	high_memory = (void *)__va(max_low_pfn * PAGE_SIZE);
-	min_low_pfn = free_ram_start_pfn;
-
-	/*
-	 * initialize the boot-time allocator (with low memory only).
-	 *
-	 * This makes the memory from the end of the kernel to the end of
-	 * RAM usable.
-	 */
-	memblock_set_bottom_up(true);
-	memblock_reserve(PFN_PHYS(ram_start_pfn), PFN_PHYS(free_ram_start_pfn - ram_start_pfn));
-
-	early_init_fdt_reserve_self();
-	early_init_fdt_scan_reserved_mem();
-
-	memblock_dump_all();
-}
-
-void __init setup_arch(char **cmdline_p)
-{
-	early_init_devtree(__atags_pointer ? \
-		phys_to_virt(__atags_pointer) : __dtb_start);
-
-	setup_cpuinfo();
-
-	setup_initial_init_mm(_stext, _etext, _edata, _end);
-
-	/* setup bootmem allocator */
-	setup_memory();
-
-	/* paging_init() sets up the MMU and marks all pages as reserved */
-	paging_init();
-
-	/* invalidate all TLB entries because the new mapping is created */
-	__nds32__tlbop_flua();
-
-	/* use generic way to parse */
-	parse_early_param();
-
-	unflatten_and_copy_device_tree();
-
-	*cmdline_p = boot_command_line;
-	early_trap_init();
-}
-
-static int c_show(struct seq_file *m, void *v)
-{
-	int i;
-
-	seq_printf(m, "Processor\t: %c%ld (id %lu, rev %lu, cfg %lu)\n",
-		   cpu_series, cpu_id, cpu_id, cpu_rev, cpu_cfgid);
-
-	seq_printf(m, "L1I\t\t: %luKB/%luS/%luW/%luB\n",
-		   CACHE_SET(ICACHE) * CACHE_WAY(ICACHE) *
-		   CACHE_LINE_SIZE(ICACHE) / 1024, CACHE_SET(ICACHE),
-		   CACHE_WAY(ICACHE), CACHE_LINE_SIZE(ICACHE));
-
-	seq_printf(m, "L1D\t\t: %luKB/%luS/%luW/%luB\n",
-		   CACHE_SET(DCACHE) * CACHE_WAY(DCACHE) *
-		   CACHE_LINE_SIZE(DCACHE) / 1024, CACHE_SET(DCACHE),
-		   CACHE_WAY(DCACHE), CACHE_LINE_SIZE(DCACHE));
-
-	seq_printf(m, "BogoMIPS\t: %lu.%02lu\n",
-		   loops_per_jiffy / (500000 / HZ),
-		   (loops_per_jiffy / (5000 / HZ)) % 100);
-
-	/* dump out the processor features */
-	seq_puts(m, "Features\t: ");
-
-	for (i = 0; hwcap_str[i]; i++)
-		if (elf_hwcap & (1 << i))
-			seq_printf(m, "%s ", hwcap_str[i]);
-
-	seq_puts(m, "\n\n");
-
-	return 0;
-}
-
-static void *c_start(struct seq_file *m, loff_t * pos)
-{
-	return *pos < 1 ? (void *)1 : NULL;
-}
-
-static void *c_next(struct seq_file *m, void *v, loff_t * pos)
-{
-	++*pos;
-	return NULL;
-}
-
-static void c_stop(struct seq_file *m, void *v)
-{
-}
-
-struct seq_operations cpuinfo_op = {
-	.start = c_start,
-	.next = c_next,
-	.stop = c_stop,
-	.show = c_show
-};
diff --git a/arch/nds32/kernel/signal.c b/arch/nds32/kernel/signal.c
deleted file mode 100644
index 7e3ca430a223..000000000000
--- a/arch/nds32/kernel/signal.c
+++ /dev/null
@@ -1,384 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/ptrace.h>
-#include <linux/personality.h>
-#include <linux/freezer.h>
-#include <linux/tracehook.h>
-#include <linux/uaccess.h>
-
-#include <asm/cacheflush.h>
-#include <asm/ucontext.h>
-#include <asm/unistd.h>
-#include <asm/fpu.h>
-
-#include <asm/ptrace.h>
-#include <asm/vdso.h>
-
-struct rt_sigframe {
-	struct siginfo info;
-	struct ucontext uc;
-};
-#if IS_ENABLED(CONFIG_FPU)
-static inline int restore_sigcontext_fpu(struct pt_regs *regs,
-					 struct sigcontext __user *sc)
-{
-	struct task_struct *tsk = current;
-	unsigned long used_math_flag;
-	int ret = 0;
-
-	clear_used_math();
-	__get_user_error(used_math_flag, &sc->used_math_flag, ret);
-
-	if (!used_math_flag)
-		return 0;
-	set_used_math();
-
-#if IS_ENABLED(CONFIG_LAZY_FPU)
-	preempt_disable();
-	if (current == last_task_used_math) {
-		last_task_used_math = NULL;
-		disable_ptreg_fpu(regs);
-	}
-	preempt_enable();
-#else
-	clear_fpu(regs);
-#endif
-
-	return __copy_from_user(&tsk->thread.fpu, &sc->fpu,
-				sizeof(struct fpu_struct));
-}
-
-static inline int setup_sigcontext_fpu(struct pt_regs *regs,
-				       struct sigcontext __user *sc)
-{
-	struct task_struct *tsk = current;
-	int ret = 0;
-
-	__put_user_error(used_math(), &sc->used_math_flag, ret);
-
-	if (!used_math())
-		return ret;
-
-	preempt_disable();
-#if IS_ENABLED(CONFIG_LAZY_FPU)
-	if (last_task_used_math == tsk)
-		save_fpu(last_task_used_math);
-#else
-	unlazy_fpu(tsk);
-#endif
-	ret = __copy_to_user(&sc->fpu, &tsk->thread.fpu,
-			     sizeof(struct fpu_struct));
-	preempt_enable();
-	return ret;
-}
-#endif
-
-static int restore_sigframe(struct pt_regs *regs,
-			    struct rt_sigframe __user * sf)
-{
-	sigset_t set;
-	int err;
-
-	err = __copy_from_user(&set, &sf->uc.uc_sigmask, sizeof(set));
-	if (err == 0) {
-		set_current_blocked(&set);
-	}
-
-	__get_user_error(regs->uregs[0], &sf->uc.uc_mcontext.nds32_r0, err);
-	__get_user_error(regs->uregs[1], &sf->uc.uc_mcontext.nds32_r1, err);
-	__get_user_error(regs->uregs[2], &sf->uc.uc_mcontext.nds32_r2, err);
-	__get_user_error(regs->uregs[3], &sf->uc.uc_mcontext.nds32_r3, err);
-	__get_user_error(regs->uregs[4], &sf->uc.uc_mcontext.nds32_r4, err);
-	__get_user_error(regs->uregs[5], &sf->uc.uc_mcontext.nds32_r5, err);
-	__get_user_error(regs->uregs[6], &sf->uc.uc_mcontext.nds32_r6, err);
-	__get_user_error(regs->uregs[7], &sf->uc.uc_mcontext.nds32_r7, err);
-	__get_user_error(regs->uregs[8], &sf->uc.uc_mcontext.nds32_r8, err);
-	__get_user_error(regs->uregs[9], &sf->uc.uc_mcontext.nds32_r9, err);
-	__get_user_error(regs->uregs[10], &sf->uc.uc_mcontext.nds32_r10, err);
-	__get_user_error(regs->uregs[11], &sf->uc.uc_mcontext.nds32_r11, err);
-	__get_user_error(regs->uregs[12], &sf->uc.uc_mcontext.nds32_r12, err);
-	__get_user_error(regs->uregs[13], &sf->uc.uc_mcontext.nds32_r13, err);
-	__get_user_error(regs->uregs[14], &sf->uc.uc_mcontext.nds32_r14, err);
-	__get_user_error(regs->uregs[15], &sf->uc.uc_mcontext.nds32_r15, err);
-	__get_user_error(regs->uregs[16], &sf->uc.uc_mcontext.nds32_r16, err);
-	__get_user_error(regs->uregs[17], &sf->uc.uc_mcontext.nds32_r17, err);
-	__get_user_error(regs->uregs[18], &sf->uc.uc_mcontext.nds32_r18, err);
-	__get_user_error(regs->uregs[19], &sf->uc.uc_mcontext.nds32_r19, err);
-	__get_user_error(regs->uregs[20], &sf->uc.uc_mcontext.nds32_r20, err);
-	__get_user_error(regs->uregs[21], &sf->uc.uc_mcontext.nds32_r21, err);
-	__get_user_error(regs->uregs[22], &sf->uc.uc_mcontext.nds32_r22, err);
-	__get_user_error(regs->uregs[23], &sf->uc.uc_mcontext.nds32_r23, err);
-	__get_user_error(regs->uregs[24], &sf->uc.uc_mcontext.nds32_r24, err);
-	__get_user_error(regs->uregs[25], &sf->uc.uc_mcontext.nds32_r25, err);
-
-	__get_user_error(regs->fp, &sf->uc.uc_mcontext.nds32_fp, err);
-	__get_user_error(regs->gp, &sf->uc.uc_mcontext.nds32_gp, err);
-	__get_user_error(regs->lp, &sf->uc.uc_mcontext.nds32_lp, err);
-	__get_user_error(regs->sp, &sf->uc.uc_mcontext.nds32_sp, err);
-	__get_user_error(regs->ipc, &sf->uc.uc_mcontext.nds32_ipc, err);
-#if defined(CONFIG_HWZOL)
-	__get_user_error(regs->lc, &sf->uc.uc_mcontext.zol.nds32_lc, err);
-	__get_user_error(regs->le, &sf->uc.uc_mcontext.zol.nds32_le, err);
-	__get_user_error(regs->lb, &sf->uc.uc_mcontext.zol.nds32_lb, err);
-#endif
-#if IS_ENABLED(CONFIG_FPU)
-	err |= restore_sigcontext_fpu(regs, &sf->uc.uc_mcontext);
-#endif
-	/*
-	 * Avoid sys_rt_sigreturn() restarting.
-	 */
-	forget_syscall(regs);
-	return err;
-}
-
-asmlinkage long sys_rt_sigreturn(struct pt_regs *regs)
-{
-	struct rt_sigframe __user *frame;
-
-	/* Always make any pending restarted system calls return -EINTR */
-	current->restart_block.fn = do_no_restart_syscall;
-
-	/*
-	 * Since we stacked the signal on a 64-bit boundary,
-	 * then 'sp' should be two-word aligned here.  If it's
-	 * not, then the user is trying to mess with us.
-	 */
-	if (regs->sp & 7)
-		goto badframe;
-
-	frame = (struct rt_sigframe __user *)regs->sp;
-
-	if (!access_ok(frame, sizeof(*frame)))
-		goto badframe;
-
-	if (restore_sigframe(regs, frame))
-		goto badframe;
-
-	if (restore_altstack(&frame->uc.uc_stack))
-		goto badframe;
-
-	return regs->uregs[0];
-
-badframe:
-	force_sig(SIGSEGV);
-	return 0;
-}
-
-static int
-setup_sigframe(struct rt_sigframe __user * sf, struct pt_regs *regs,
-	       sigset_t * set)
-{
-	int err = 0;
-
-	__put_user_error(regs->uregs[0], &sf->uc.uc_mcontext.nds32_r0, err);
-	__put_user_error(regs->uregs[1], &sf->uc.uc_mcontext.nds32_r1, err);
-	__put_user_error(regs->uregs[2], &sf->uc.uc_mcontext.nds32_r2, err);
-	__put_user_error(regs->uregs[3], &sf->uc.uc_mcontext.nds32_r3, err);
-	__put_user_error(regs->uregs[4], &sf->uc.uc_mcontext.nds32_r4, err);
-	__put_user_error(regs->uregs[5], &sf->uc.uc_mcontext.nds32_r5, err);
-	__put_user_error(regs->uregs[6], &sf->uc.uc_mcontext.nds32_r6, err);
-	__put_user_error(regs->uregs[7], &sf->uc.uc_mcontext.nds32_r7, err);
-	__put_user_error(regs->uregs[8], &sf->uc.uc_mcontext.nds32_r8, err);
-	__put_user_error(regs->uregs[9], &sf->uc.uc_mcontext.nds32_r9, err);
-	__put_user_error(regs->uregs[10], &sf->uc.uc_mcontext.nds32_r10, err);
-	__put_user_error(regs->uregs[11], &sf->uc.uc_mcontext.nds32_r11, err);
-	__put_user_error(regs->uregs[12], &sf->uc.uc_mcontext.nds32_r12, err);
-	__put_user_error(regs->uregs[13], &sf->uc.uc_mcontext.nds32_r13, err);
-	__put_user_error(regs->uregs[14], &sf->uc.uc_mcontext.nds32_r14, err);
-	__put_user_error(regs->uregs[15], &sf->uc.uc_mcontext.nds32_r15, err);
-	__put_user_error(regs->uregs[16], &sf->uc.uc_mcontext.nds32_r16, err);
-	__put_user_error(regs->uregs[17], &sf->uc.uc_mcontext.nds32_r17, err);
-	__put_user_error(regs->uregs[18], &sf->uc.uc_mcontext.nds32_r18, err);
-	__put_user_error(regs->uregs[19], &sf->uc.uc_mcontext.nds32_r19, err);
-	__put_user_error(regs->uregs[20], &sf->uc.uc_mcontext.nds32_r20, err);
-
-	__put_user_error(regs->uregs[21], &sf->uc.uc_mcontext.nds32_r21, err);
-	__put_user_error(regs->uregs[22], &sf->uc.uc_mcontext.nds32_r22, err);
-	__put_user_error(regs->uregs[23], &sf->uc.uc_mcontext.nds32_r23, err);
-	__put_user_error(regs->uregs[24], &sf->uc.uc_mcontext.nds32_r24, err);
-	__put_user_error(regs->uregs[25], &sf->uc.uc_mcontext.nds32_r25, err);
-	__put_user_error(regs->fp, &sf->uc.uc_mcontext.nds32_fp, err);
-	__put_user_error(regs->gp, &sf->uc.uc_mcontext.nds32_gp, err);
-	__put_user_error(regs->lp, &sf->uc.uc_mcontext.nds32_lp, err);
-	__put_user_error(regs->sp, &sf->uc.uc_mcontext.nds32_sp, err);
-	__put_user_error(regs->ipc, &sf->uc.uc_mcontext.nds32_ipc, err);
-#if defined(CONFIG_HWZOL)
-	__put_user_error(regs->lc, &sf->uc.uc_mcontext.zol.nds32_lc, err);
-	__put_user_error(regs->le, &sf->uc.uc_mcontext.zol.nds32_le, err);
-	__put_user_error(regs->lb, &sf->uc.uc_mcontext.zol.nds32_lb, err);
-#endif
-#if IS_ENABLED(CONFIG_FPU)
-	err |= setup_sigcontext_fpu(regs, &sf->uc.uc_mcontext);
-#endif
-
-	__put_user_error(current->thread.trap_no, &sf->uc.uc_mcontext.trap_no,
-			 err);
-	__put_user_error(current->thread.error_code,
-			 &sf->uc.uc_mcontext.error_code, err);
-	__put_user_error(current->thread.address,
-			 &sf->uc.uc_mcontext.fault_address, err);
-	__put_user_error(set->sig[0], &sf->uc.uc_mcontext.oldmask, err);
-
-	err |= __copy_to_user(&sf->uc.uc_sigmask, set, sizeof(*set));
-
-	return err;
-}
-
-static inline void __user *get_sigframe(struct ksignal *ksig,
-					struct pt_regs *regs, int framesize)
-{
-	unsigned long sp;
-
-	/* Default to using normal stack */
-	sp = regs->sp;
-
-	/*
-	 * If we are on the alternate signal stack and would overflow it, don't.
-	 * Return an always-bogus address instead so we will die with SIGSEGV.
-	 */
-	if (on_sig_stack(sp) && !likely(on_sig_stack(sp - framesize)))
-		return (void __user __force *)(-1UL);
-
-	/* This is the X/Open sanctioned signal stack switching. */
-	sp = (sigsp(sp, ksig) - framesize);
-
-	/*
-	 * nds32 mandates 8-byte alignment
-	 */
-	sp &= ~0x7UL;
-
-	return (void __user *)sp;
-}
-
-static int
-setup_return(struct pt_regs *regs, struct ksignal *ksig, void __user * frame)
-{
-	unsigned long handler = (unsigned long)ksig->ka.sa.sa_handler;
-	unsigned long retcode;
-
-	retcode = VDSO_SYMBOL(current->mm->context.vdso, rt_sigtramp);
-	regs->uregs[0] = ksig->sig;
-	regs->sp = (unsigned long)frame;
-	regs->lp = retcode;
-	regs->ipc = handler;
-
-	return 0;
-}
-
-static int
-setup_rt_frame(struct ksignal *ksig, sigset_t * set, struct pt_regs *regs)
-{
-	struct rt_sigframe __user *frame =
-	    get_sigframe(ksig, regs, sizeof(*frame));
-	int err = 0;
-
-	if (!access_ok(frame, sizeof(*frame)))
-		return -EFAULT;
-
-	__put_user_error(0, &frame->uc.uc_flags, err);
-	__put_user_error(NULL, &frame->uc.uc_link, err);
-
-	err |= __save_altstack(&frame->uc.uc_stack, regs->sp);
-	err |= setup_sigframe(frame, regs, set);
-	if (err == 0) {
-		setup_return(regs, ksig, frame);
-		if (ksig->ka.sa.sa_flags & SA_SIGINFO) {
-			err |= copy_siginfo_to_user(&frame->info, &ksig->info);
-			regs->uregs[1] = (unsigned long)&frame->info;
-			regs->uregs[2] = (unsigned long)&frame->uc;
-		}
-	}
-	return err;
-}
-
-/*
- * OK, we're invoking a handler
- */
-static void handle_signal(struct ksignal *ksig, struct pt_regs *regs)
-{
-	int ret;
-	sigset_t *oldset = sigmask_to_save();
-
-	if (in_syscall(regs)) {
-		/* Avoid additional syscall restarting via ret_slow_syscall. */
-		forget_syscall(regs);
-
-		switch (regs->uregs[0]) {
-		case -ERESTART_RESTARTBLOCK:
-		case -ERESTARTNOHAND:
-			regs->uregs[0] = -EINTR;
-			break;
-		case -ERESTARTSYS:
-			if (!(ksig->ka.sa.sa_flags & SA_RESTART)) {
-				regs->uregs[0] = -EINTR;
-				break;
-			}
-			fallthrough;
-		case -ERESTARTNOINTR:
-			regs->uregs[0] = regs->orig_r0;
-			regs->ipc -= 4;
-			break;
-		}
-	}
-	/*
-	 * Set up the stack frame
-	 */
-	ret = setup_rt_frame(ksig, oldset, regs);
-
-	signal_setup_done(ret, ksig, 0);
-}
-
-/*
- * Note that 'init' is a special process: it doesn't get signals it doesn't
- * want to handle. Thus you cannot kill init even with a SIGKILL even by
- * mistake.
- *
- * Note that we go through the signals twice: once to check the signals that
- * the kernel can handle, and then we build all the user-level signal handling
- * stack-frames in one go after that.
- */
-static void do_signal(struct pt_regs *regs)
-{
-	struct ksignal ksig;
-
-	if (get_signal(&ksig)) {
-		handle_signal(&ksig, regs);
-		return;
-	}
-
-	/*
-	 * If we were from a system call, check for system call restarting...
-	 */
-	if (in_syscall(regs)) {
-		/* Restart the system call - no handlers present */
-
-		/* Avoid additional syscall restarting via ret_slow_syscall. */
-		forget_syscall(regs);
-
-		switch (regs->uregs[0]) {
-		case -ERESTART_RESTARTBLOCK:
-			regs->uregs[15] = __NR_restart_syscall;
-			fallthrough;
-		case -ERESTARTNOHAND:
-		case -ERESTARTSYS:
-		case -ERESTARTNOINTR:
-			regs->uregs[0] = regs->orig_r0;
-			regs->ipc -= 0x4;
-			break;
-		}
-	}
-	restore_saved_sigmask();
-}
-
-asmlinkage void
-do_notify_resume(struct pt_regs *regs, unsigned int thread_flags)
-{
-	if (thread_flags & (_TIF_SIGPENDING | _TIF_NOTIFY_SIGNAL))
-		do_signal(regs);
-
-	if (thread_flags & _TIF_NOTIFY_RESUME)
-		tracehook_notify_resume(regs);
-}
diff --git a/arch/nds32/kernel/sleep.S b/arch/nds32/kernel/sleep.S
deleted file mode 100644
index ca4e61f3656f..000000000000
--- a/arch/nds32/kernel/sleep.S
+++ /dev/null
@@ -1,131 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* Copyright (C) 2017 Andes Technology Corporation */
-
-#include <asm/memory.h>
-
-.data
-.global sp_tmp
-sp_tmp:
-.long
-
-.text
-.globl suspend2ram
-.globl cpu_resume
-
-suspend2ram:
-	pushm   $r0, $r31
-#if defined(CONFIG_HWZOL)
-	mfusr   $r0, $lc
-	mfusr   $r1, $le
-	mfusr   $r2, $lb
-#endif
-	mfsr	$r3, $mr0
-	mfsr    $r4, $mr1
-	mfsr    $r5, $mr4
-	mfsr    $r6, $mr6
-	mfsr    $r7, $mr7
-	mfsr    $r8, $mr8
-	mfsr    $r9, $ir0
-	mfsr    $r10, $ir1
-	mfsr    $r11, $ir2
-	mfsr    $r12, $ir3
-	mfsr    $r13, $ir9
-	mfsr    $r14, $ir10
-	mfsr    $r15, $ir12
-	mfsr    $r16, $ir13
-	mfsr    $r17, $ir14
-	mfsr    $r18, $ir15
-	pushm   $r0, $r19
-#if defined(CONFIG_FPU)
-	jal	store_fpu_for_suspend
-#endif
-	tlbop	FlushAll
-	isb
-
-	// transfer $sp from va to pa
-	sethi	$r0, hi20(PAGE_OFFSET)
-	ori	$r0, $r0, lo12(PAGE_OFFSET)
-	movi	$r2, PHYS_OFFSET
-	sub	$r1, $sp, $r0
-	add	$r2, $r1, $r2
-
-	// store pa($sp) to sp_tmp
-	sethi 	$r1, hi20(sp_tmp)
-	swi	$r2, [$r1 + lo12(sp_tmp)]
-
-	pushm	$r16, $r25
-	pushm	$r29, $r30
-#ifdef	CONFIG_CACHE_L2
-	jal	dcache_wb_all_level
-#else
-	jal	cpu_dcache_wb_all
-#endif
-	popm	$r29, $r30
-	popm	$r16, $r25
-
-	// get wake_mask and loop in standby
-	la	$r1, wake_mask
-	lwi	$r1, [$r1]
-self_loop:
-	standby wake_grant
-	mfsr	$r2, $ir15
-	and	$r2, $r1, $r2
-	beqz	$r2, self_loop
-
-	// set ipc to resume address
-	la	$r1, resume_addr
-	lwi	$r1, [$r1]
-	mtsr	$r1, $ipc
-	isb
-
-	// reset psw, turn off the address translation
-	li      $r2, 0x7000a
-	mtsr    $r2, $ipsw
-	isb
-
-	iret
-cpu_resume:
-	// translate the address of sp_tmp variable to pa
-	la	$r1, sp_tmp
-	sethi   $r0, hi20(PAGE_OFFSET)
-	ori     $r0, $r0, lo12(PAGE_OFFSET)
-	movi    $r2, PHYS_OFFSET
-	sub     $r1, $r1, $r0
-	add     $r1, $r1, $r2
-
-	// access the sp_tmp to get stack pointer
-	lwi	$sp, [$r1]
-
-	popm	$r0, $r19
-#if defined(CONFIG_HWZOL)
-	mtusr   $r0, $lb
-	mtusr   $r1, $lc
-	mtusr   $r2, $le
-#endif
-	mtsr	$r3, $mr0
-	mtsr    $r4, $mr1
-	mtsr    $r5, $mr4
-	mtsr    $r6, $mr6
-	mtsr    $r7, $mr7
-	mtsr    $r8, $mr8
-	// set original psw to ipsw
-	mtsr    $r9, $ir1
-
-	mtsr    $r11, $ir2
-	mtsr    $r12, $ir3
-
-	// set ipc to RR
-	la	$r13, RR
-	mtsr	$r13, $ir9
-
-	mtsr    $r14, $ir10
-	mtsr    $r15, $ir12
-	mtsr    $r16, $ir13
-	mtsr    $r17, $ir14
-	mtsr    $r18, $ir15
-	popm    $r0, $r31
-
-	isb
-	iret
-RR:
-	ret
diff --git a/arch/nds32/kernel/stacktrace.c b/arch/nds32/kernel/stacktrace.c
deleted file mode 100644
index d974c0c1c65f..000000000000
--- a/arch/nds32/kernel/stacktrace.c
+++ /dev/null
@@ -1,53 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#include <linux/sched/debug.h>
-#include <linux/sched/task_stack.h>
-#include <linux/stacktrace.h>
-#include <linux/ftrace.h>
-
-void save_stack_trace(struct stack_trace *trace)
-{
-	save_stack_trace_tsk(current, trace);
-}
-EXPORT_SYMBOL_GPL(save_stack_trace);
-
-void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
-{
-	unsigned long *fpn;
-	int skip = trace->skip;
-	int savesched;
-	int graph_idx = 0;
-
-	if (tsk == current) {
-		__asm__ __volatile__("\tori\t%0, $fp, #0\n":"=r"(fpn));
-		savesched = 1;
-	} else {
-		fpn = (unsigned long *)thread_saved_fp(tsk);
-		savesched = 0;
-	}
-
-	while (!kstack_end(fpn) && !((unsigned long)fpn & 0x3)
-	       && (fpn >= (unsigned long *)TASK_SIZE)) {
-		unsigned long lpp, fpp;
-
-		lpp = fpn[LP_OFFSET];
-		fpp = fpn[FP_OFFSET];
-		if (!__kernel_text_address(lpp))
-			break;
-		else
-			lpp = ftrace_graph_ret_addr(tsk, &graph_idx, lpp, NULL);
-
-		if (savesched || !in_sched_functions(lpp)) {
-			if (skip) {
-				skip--;
-			} else {
-				trace->entries[trace->nr_entries++] = lpp;
-				if (trace->nr_entries >= trace->max_entries)
-					break;
-			}
-		}
-		fpn = (unsigned long *)fpp;
-	}
-}
-EXPORT_SYMBOL_GPL(save_stack_trace_tsk);
diff --git a/arch/nds32/kernel/sys_nds32.c b/arch/nds32/kernel/sys_nds32.c
deleted file mode 100644
index cb2d1e219bb3..000000000000
--- a/arch/nds32/kernel/sys_nds32.c
+++ /dev/null
@@ -1,84 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#include <linux/syscalls.h>
-#include <linux/uaccess.h>
-
-#include <asm/cachectl.h>
-#include <asm/proc-fns.h>
-#include <asm/fpu.h>
-#include <asm/fp_udfiex_crtl.h>
-
-SYSCALL_DEFINE6(mmap2, unsigned long, addr, unsigned long, len,
-	       unsigned long, prot, unsigned long, flags,
-	       unsigned long, fd, unsigned long, pgoff)
-{
-	if (pgoff & (~PAGE_MASK >> 12))
-		return -EINVAL;
-
-	return sys_mmap_pgoff(addr, len, prot, flags, fd,
-			      pgoff >> (PAGE_SHIFT - 12));
-}
-
-SYSCALL_DEFINE4(fadvise64_64_wrapper,int, fd, int, advice, loff_t, offset,
-					 loff_t, len)
-{
-	return sys_fadvise64_64(fd, offset, len, advice);
-}
-
-SYSCALL_DEFINE3(cacheflush, unsigned int, start, unsigned int, end, int, cache)
-{
-	struct vm_area_struct *vma;
-	bool flushi = true, wbd = true;
-
-	vma = find_vma(current->mm, start);
-	if (!vma)
-		return -EFAULT;
-	switch (cache) {
-	case ICACHE:
-		wbd = false;
-		break;
-	case DCACHE:
-		flushi = false;
-		break;
-	case BCACHE:
-		break;
-	default:
-		return -EINVAL;
-	}
-	cpu_cache_wbinval_range_check(vma, start, end, flushi, wbd);
-
-	return 0;
-}
-
-SYSCALL_DEFINE2(fp_udfiex_crtl, unsigned int, cmd, unsigned int, act)
-{
-#if IS_ENABLED(CONFIG_SUPPORT_DENORMAL_ARITHMETIC)
-	int old_udf_iex;
-
-	if (!used_math()) {
-		load_fpu(&init_fpuregs);
-		current->thread.fpu.UDF_IEX_trap = init_fpuregs.UDF_IEX_trap;
-		set_used_math();
-	}
-
-	old_udf_iex = current->thread.fpu.UDF_IEX_trap;
-	act &= (FPCSR_mskUDFE | FPCSR_mskIEXE);
-
-	switch (cmd) {
-	case DISABLE_UDF_IEX_TRAP:
-		current->thread.fpu.UDF_IEX_trap &= ~act;
-		break;
-	case ENABLE_UDF_IEX_TRAP:
-		current->thread.fpu.UDF_IEX_trap |= act;
-		break;
-	case GET_UDF_IEX_TRAP:
-		break;
-	default:
-		return -EINVAL;
-	}
-	return old_udf_iex;
-#else
-	return -ENOTSUPP;
-#endif
-}
diff --git a/arch/nds32/kernel/syscall_table.c b/arch/nds32/kernel/syscall_table.c
deleted file mode 100644
index 7879c061b87f..000000000000
--- a/arch/nds32/kernel/syscall_table.c
+++ /dev/null
@@ -1,17 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#include <linux/syscalls.h>
-#include <linux/signal.h>
-#include <linux/unistd.h>
-#include <asm/syscalls.h>
-
-#undef __SYSCALL
-#define __SYSCALL(nr, call) [nr] = (call),
-
-#define sys_rt_sigreturn sys_rt_sigreturn_wrapper
-#define sys_fadvise64_64 sys_fadvise64_64_wrapper
-void *sys_call_table[__NR_syscalls] __aligned(8192) = {
-	[0 ... __NR_syscalls - 1] = sys_ni_syscall,
-#include <asm/unistd.h>
-};
diff --git a/arch/nds32/kernel/time.c b/arch/nds32/kernel/time.c
deleted file mode 100644
index 574a3d0a8539..000000000000
--- a/arch/nds32/kernel/time.c
+++ /dev/null
@@ -1,11 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#include <linux/clocksource.h>
-#include <linux/of_clk.h>
-
-void __init time_init(void)
-{
-	of_clk_init(NULL);
-	timer_probe();
-}
diff --git a/arch/nds32/kernel/traps.c b/arch/nds32/kernel/traps.c
deleted file mode 100644
index c0a8f3344fb9..000000000000
--- a/arch/nds32/kernel/traps.c
+++ /dev/null
@@ -1,354 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#include <linux/module.h>
-#include <linux/personality.h>
-#include <linux/kallsyms.h>
-#include <linux/hardirq.h>
-#include <linux/kdebug.h>
-#include <linux/sched/task_stack.h>
-#include <linux/uaccess.h>
-#include <linux/ftrace.h>
-
-#include <asm/proc-fns.h>
-#include <asm/unistd.h>
-#include <asm/fpu.h>
-
-#include <linux/ptrace.h>
-#include <nds32_intrinsic.h>
-
-extern void show_pte(struct mm_struct *mm, unsigned long addr);
-
-/*
- * Dump out the contents of some memory nicely...
- */
-void dump_mem(const char *lvl, unsigned long bottom, unsigned long top)
-{
-	unsigned long first;
-	int i;
-
-	pr_emerg("%s(0x%08lx to 0x%08lx)\n", lvl, bottom, top);
-
-	for (first = bottom & ~31; first < top; first += 32) {
-		unsigned long p;
-		char str[sizeof(" 12345678") * 8 + 1];
-
-		memset(str, ' ', sizeof(str));
-		str[sizeof(str) - 1] = '\0';
-
-		for (p = first, i = 0; i < 8 && p < top; i++, p += 4) {
-			if (p >= bottom && p < top) {
-				unsigned long val;
-
-				if (get_kernel_nofault(val,
-						(unsigned long *)p) == 0)
-					sprintf(str + i * 9, " %08lx", val);
-				else
-					sprintf(str + i * 9, " ????????");
-			}
-		}
-		pr_emerg("%s%04lx:%s\n", lvl, first & 0xffff, str);
-	}
-}
-
-EXPORT_SYMBOL(dump_mem);
-
-#define LOOP_TIMES (100)
-static void __dump(struct task_struct *tsk, unsigned long *base_reg,
-		   const char *loglvl)
-{
-	unsigned long ret_addr;
-	int cnt = LOOP_TIMES, graph = 0;
-	printk("%sCall Trace:\n", loglvl);
-	if (!IS_ENABLED(CONFIG_FRAME_POINTER)) {
-		while (!kstack_end(base_reg)) {
-			ret_addr = *base_reg++;
-			if (__kernel_text_address(ret_addr)) {
-				ret_addr = ftrace_graph_ret_addr(
-						tsk, &graph, ret_addr, NULL);
-				print_ip_sym(loglvl, ret_addr);
-			}
-			if (--cnt < 0)
-				break;
-		}
-	} else {
-		while (!kstack_end((void *)base_reg) &&
-		       !((unsigned long)base_reg & 0x3) &&
-		       ((unsigned long)base_reg >= TASK_SIZE)) {
-			unsigned long next_fp;
-			ret_addr = base_reg[LP_OFFSET];
-			next_fp = base_reg[FP_OFFSET];
-			if (__kernel_text_address(ret_addr)) {
-
-				ret_addr = ftrace_graph_ret_addr(
-						tsk, &graph, ret_addr, NULL);
-				print_ip_sym(loglvl, ret_addr);
-			}
-			if (--cnt < 0)
-				break;
-			base_reg = (unsigned long *)next_fp;
-		}
-	}
-	printk("%s\n", loglvl);
-}
-
-void show_stack(struct task_struct *tsk, unsigned long *sp, const char *loglvl)
-{
-	unsigned long *base_reg;
-
-	if (!tsk)
-		tsk = current;
-	if (!IS_ENABLED(CONFIG_FRAME_POINTER)) {
-		if (tsk != current)
-			base_reg = (unsigned long *)(tsk->thread.cpu_context.sp);
-		else
-			__asm__ __volatile__("\tori\t%0, $sp, #0\n":"=r"(base_reg));
-	} else {
-		if (tsk != current)
-			base_reg = (unsigned long *)(tsk->thread.cpu_context.fp);
-		else
-			__asm__ __volatile__("\tori\t%0, $fp, #0\n":"=r"(base_reg));
-	}
-	__dump(tsk, base_reg, loglvl);
-	barrier();
-}
-
-DEFINE_SPINLOCK(die_lock);
-
-/*
- * This function is protected against re-entrancy.
- */
-void __noreturn die(const char *str, struct pt_regs *regs, int err)
-{
-	struct task_struct *tsk = current;
-	static int die_counter;
-
-	console_verbose();
-	spin_lock_irq(&die_lock);
-	bust_spinlocks(1);
-
-	pr_emerg("Internal error: %s: %x [#%d]\n", str, err, ++die_counter);
-	print_modules();
-	pr_emerg("CPU: %i\n", smp_processor_id());
-	show_regs(regs);
-	pr_emerg("Process %s (pid: %d, stack limit = 0x%p)\n",
-		 tsk->comm, tsk->pid, end_of_stack(tsk));
-
-	if (!user_mode(regs) || in_interrupt()) {
-		dump_mem("Stack: ", regs->sp, (regs->sp + PAGE_SIZE) & PAGE_MASK);
-		dump_stack();
-	}
-
-	bust_spinlocks(0);
-	spin_unlock_irq(&die_lock);
-	make_task_dead(SIGSEGV);
-}
-
-EXPORT_SYMBOL(die);
-
-void die_if_kernel(const char *str, struct pt_regs *regs, int err)
-{
-	if (user_mode(regs))
-		return;
-
-	die(str, regs, err);
-}
-
-int bad_syscall(int n, struct pt_regs *regs)
-{
-	if (current->personality != PER_LINUX) {
-		send_sig(SIGSEGV, current, 1);
-		return regs->uregs[0];
-	}
-
-	force_sig_fault(SIGILL, ILL_ILLTRP,
-			(void __user *)instruction_pointer(regs) - 4);
-	die_if_kernel("Oops - bad syscall", regs, n);
-	return regs->uregs[0];
-}
-
-void __pte_error(const char *file, int line, unsigned long val)
-{
-	pr_emerg("%s:%d: bad pte %08lx.\n", file, line, val);
-}
-
-void __pmd_error(const char *file, int line, unsigned long val)
-{
-	pr_emerg("%s:%d: bad pmd %08lx.\n", file, line, val);
-}
-
-void __pgd_error(const char *file, int line, unsigned long val)
-{
-	pr_emerg("%s:%d: bad pgd %08lx.\n", file, line, val);
-}
-
-extern char *exception_vector, *exception_vector_end;
-void __init early_trap_init(void)
-{
-	unsigned long ivb = 0;
-	unsigned long base = PAGE_OFFSET;
-
-	memcpy((unsigned long *)base, (unsigned long *)&exception_vector,
-	       ((unsigned long)&exception_vector_end -
-		(unsigned long)&exception_vector));
-	ivb = __nds32__mfsr(NDS32_SR_IVB);
-	/* Check platform support. */
-	if (((ivb & IVB_mskNIVIC) >> IVB_offNIVIC) < 2)
-		panic
-		    ("IVIC mode is not allowed on the platform with interrupt controller\n");
-	__nds32__mtsr((ivb & ~IVB_mskESZ) | (IVB_valESZ16 << IVB_offESZ) |
-		      IVB_BASE, NDS32_SR_IVB);
-	__nds32__mtsr(INT_MASK_INITAIAL_VAL, NDS32_SR_INT_MASK);
-
-	/*
-	 * 0x800 = 128 vectors * 16byte.
-	 * It should be enough to flush a page.
-	 */
-	cpu_cache_wbinval_page(base, true);
-}
-
-static void send_sigtrap(struct pt_regs *regs, int error_code, int si_code)
-{
-	struct task_struct *tsk = current;
-
-	tsk->thread.trap_no = ENTRY_DEBUG_RELATED;
-	tsk->thread.error_code = error_code;
-
-	force_sig_fault(SIGTRAP, si_code,
-			(void __user *)instruction_pointer(regs));
-}
-
-void do_debug_trap(unsigned long entry, unsigned long addr,
-		   unsigned long type, struct pt_regs *regs)
-{
-	if (notify_die(DIE_OOPS, "Oops", regs, addr, type, SIGTRAP)
-	    == NOTIFY_STOP)
-		return;
-
-	if (user_mode(regs)) {
-		/* trap_signal */
-		send_sigtrap(regs, 0, TRAP_BRKPT);
-	} else {
-		/* kernel_trap */
-		if (!fixup_exception(regs))
-			die("unexpected kernel_trap", regs, 0);
-	}
-}
-
-void unhandled_interruption(struct pt_regs *regs)
-{
-	pr_emerg("unhandled_interruption\n");
-	show_regs(regs);
-	if (!user_mode(regs))
-		make_task_dead(SIGKILL);
-	force_sig(SIGKILL);
-}
-
-void unhandled_exceptions(unsigned long entry, unsigned long addr,
-			  unsigned long type, struct pt_regs *regs)
-{
-	pr_emerg("Unhandled Exception: entry: %lx addr:%lx itype:%lx\n", entry,
-		 addr, type);
-	show_regs(regs);
-	if (!user_mode(regs))
-		make_task_dead(SIGKILL);
-	force_sig(SIGKILL);
-}
-
-extern int do_page_fault(unsigned long entry, unsigned long addr,
-			 unsigned int error_code, struct pt_regs *regs);
-
-/*
- * 2:DEF dispatch for TLB MISC exception handler
-*/
-
-void do_dispatch_tlb_misc(unsigned long entry, unsigned long addr,
-			  unsigned long type, struct pt_regs *regs)
-{
-	type = type & (ITYPE_mskINST | ITYPE_mskETYPE);
-	if ((type & ITYPE_mskETYPE) < 5) {
-		/* Permission exceptions */
-		do_page_fault(entry, addr, type, regs);
-	} else
-		unhandled_exceptions(entry, addr, type, regs);
-}
-
-void do_revinsn(struct pt_regs *regs)
-{
-	pr_emerg("Reserved Instruction\n");
-	show_regs(regs);
-	if (!user_mode(regs))
-		make_task_dead(SIGILL);
-	force_sig(SIGILL);
-}
-
-#ifdef CONFIG_ALIGNMENT_TRAP
-extern int unalign_access_mode;
-extern int do_unaligned_access(unsigned long addr, struct pt_regs *regs);
-#endif
-void do_dispatch_general(unsigned long entry, unsigned long addr,
-			 unsigned long itype, struct pt_regs *regs,
-			 unsigned long oipc)
-{
-	unsigned int swid = itype >> ITYPE_offSWID;
-	unsigned long type = itype & (ITYPE_mskINST | ITYPE_mskETYPE);
-	if (type == ETYPE_ALIGNMENT_CHECK) {
-#ifdef CONFIG_ALIGNMENT_TRAP
-		/* Alignment check */
-		if (user_mode(regs) && unalign_access_mode) {
-			int ret;
-			ret = do_unaligned_access(addr, regs);
-
-			if (ret == 0)
-				return;
-
-			if (ret == -EFAULT)
-				pr_emerg
-				    ("Unhandled unaligned access exception\n");
-		}
-#endif
-		do_page_fault(entry, addr, type, regs);
-	} else if (type == ETYPE_RESERVED_INSTRUCTION) {
-		/* Reserved instruction */
-		do_revinsn(regs);
-	} else if (type == ETYPE_COPROCESSOR) {
-		/* Coprocessor */
-#if IS_ENABLED(CONFIG_FPU)
-		unsigned int fucop_exist = __nds32__mfsr(NDS32_SR_FUCOP_EXIST);
-		unsigned int cpid = ((itype & ITYPE_mskCPID) >> ITYPE_offCPID);
-
-		if ((cpid == FPU_CPID) &&
-		    (fucop_exist & FUCOP_EXIST_mskCP0ISFPU)) {
-			unsigned int subtype = (itype & ITYPE_mskSTYPE);
-
-			if (true == do_fpu_exception(subtype, regs))
-				return;
-		}
-#endif
-		unhandled_exceptions(entry, addr, type, regs);
-	} else if (type == ETYPE_TRAP && swid == SWID_RAISE_INTERRUPT_LEVEL) {
-		/* trap, used on v3 EDM target debugging workaround */
-		/*
-		 * DIPC(OIPC) is passed as parameter before
-		 * interrupt is enabled, so the DIPC will not be corrupted
-		 * even though interrupts are coming in
-		 */
-		/*
-		 * 1. update ipc
-		 * 2. update pt_regs ipc with oipc
-		 * 3. update pt_regs ipsw (clear DEX)
-		 */
-		__asm__ volatile ("mtsr %0, $IPC\n\t"::"r" (oipc));
-		regs->ipc = oipc;
-		if (regs->pipsw & PSW_mskDEX) {
-			pr_emerg
-			    ("Nested Debug exception is possibly happened\n");
-			pr_emerg("ipc:%08x pipc:%08x\n",
-				 (unsigned int)regs->ipc,
-				 (unsigned int)regs->pipc);
-		}
-		do_debug_trap(entry, addr, itype, regs);
-		regs->ipsw &= ~PSW_mskDEX;
-	} else
-		unhandled_exceptions(entry, addr, type, regs);
-}
diff --git a/arch/nds32/kernel/vdso.c b/arch/nds32/kernel/vdso.c
deleted file mode 100644
index e16009a07971..000000000000
--- a/arch/nds32/kernel/vdso.c
+++ /dev/null
@@ -1,231 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2012 ARM Limited
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#include <linux/cache.h>
-#include <linux/clocksource.h>
-#include <linux/elf.h>
-#include <linux/err.h>
-#include <linux/errno.h>
-#include <linux/gfp.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/signal.h>
-#include <linux/slab.h>
-#include <linux/timekeeper_internal.h>
-#include <linux/vmalloc.h>
-#include <linux/random.h>
-
-#include <asm/cacheflush.h>
-#include <asm/vdso.h>
-#include <asm/vdso_datapage.h>
-#include <asm/vdso_timer_info.h>
-#include <asm/cache_info.h>
-extern struct cache_info L1_cache_info[2];
-extern char vdso_start[], vdso_end[];
-static unsigned long vdso_pages __ro_after_init;
-static unsigned long timer_mapping_base;
-
-struct timer_info_t timer_info = {
-	.cycle_count_down = true,
-	.mapping_base = EMPTY_TIMER_MAPPING,
-	.cycle_count_reg_offset = EMPTY_REG_OFFSET
-};
-/*
- * The vDSO data page.
- */
-static struct page *no_pages[] = { NULL };
-
-static union {
-	struct vdso_data data;
-	u8 page[PAGE_SIZE];
-} vdso_data_store __page_aligned_data;
-struct vdso_data *vdso_data = &vdso_data_store.data;
-static struct vm_special_mapping vdso_spec[2] __ro_after_init = {
-	{
-	 .name = "[vvar]",
-	 .pages = no_pages,
-	 },
-	{
-	 .name = "[vdso]",
-	 },
-};
-
-static void get_timer_node_info(void)
-{
-	timer_mapping_base = timer_info.mapping_base;
-	vdso_data->cycle_count_offset =
-		timer_info.cycle_count_reg_offset;
-	vdso_data->cycle_count_down =
-		timer_info.cycle_count_down;
-}
-
-static int __init vdso_init(void)
-{
-	int i;
-	struct page **vdso_pagelist;
-
-	if (memcmp(vdso_start, "\177ELF", 4)) {
-		pr_err("vDSO is not a valid ELF object!\n");
-		return -EINVAL;
-	}
-	/* Creat a timer io mapping to get clock cycles counter */
-	get_timer_node_info();
-
-	vdso_pages = (vdso_end - vdso_start) >> PAGE_SHIFT;
-	pr_info("vdso: %ld pages (%ld code @ %p, %ld data @ %p)\n",
-		vdso_pages + 1, vdso_pages, vdso_start, 1L, vdso_data);
-
-	/* Allocate the vDSO pagelist */
-	vdso_pagelist = kcalloc(vdso_pages, sizeof(struct page *), GFP_KERNEL);
-	if (vdso_pagelist == NULL)
-		return -ENOMEM;
-
-	for (i = 0; i < vdso_pages; i++)
-		vdso_pagelist[i] = virt_to_page(vdso_start + i * PAGE_SIZE);
-	vdso_spec[1].pages = &vdso_pagelist[0];
-
-	return 0;
-}
-
-arch_initcall(vdso_init);
-
-unsigned long inline vdso_random_addr(unsigned long vdso_mapping_len)
-{
-	unsigned long start = current->mm->mmap_base, end, offset, addr;
-	start = PAGE_ALIGN(start);
-
-	/* Round the lowest possible end address up to a PMD boundary. */
-	end = (start + vdso_mapping_len + PMD_SIZE - 1) & PMD_MASK;
-	if (end >= TASK_SIZE)
-		end = TASK_SIZE;
-	end -= vdso_mapping_len;
-
-	if (end > start) {
-		offset = get_random_int() % (((end - start) >> PAGE_SHIFT) + 1);
-		addr = start + (offset << PAGE_SHIFT);
-	} else {
-		addr = start;
-	}
-	return addr;
-}
-
-int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
-{
-	struct mm_struct *mm = current->mm;
-	unsigned long vdso_base, vdso_text_len, vdso_mapping_len;
-	struct vm_area_struct *vma;
-	unsigned long addr = 0;
-	pgprot_t prot;
-	int ret, vvar_page_num = 2;
-
-	vdso_text_len = vdso_pages << PAGE_SHIFT;
-
-	if(timer_mapping_base == EMPTY_VALUE)
-		vvar_page_num = 1;
-	/* Be sure to map the data page */
-	vdso_mapping_len = vdso_text_len + vvar_page_num * PAGE_SIZE;
-#ifdef CONFIG_CPU_CACHE_ALIASING
-	vdso_mapping_len += L1_cache_info[DCACHE].aliasing_num - 1;
-#endif
-
-	if (mmap_write_lock_killable(mm))
-		return -EINTR;
-
-	addr = vdso_random_addr(vdso_mapping_len);
-	vdso_base = get_unmapped_area(NULL, addr, vdso_mapping_len, 0, 0);
-	if (IS_ERR_VALUE(vdso_base)) {
-		ret = vdso_base;
-		goto up_fail;
-	}
-
-#ifdef CONFIG_CPU_CACHE_ALIASING
-	{
-		unsigned int aliasing_mask =
-		    L1_cache_info[DCACHE].aliasing_mask;
-		unsigned int page_colour_ofs;
-		page_colour_ofs = ((unsigned int)vdso_data & aliasing_mask) -
-		    (vdso_base & aliasing_mask);
-		vdso_base += page_colour_ofs & aliasing_mask;
-	}
-#endif
-
-	vma = _install_special_mapping(mm, vdso_base, vvar_page_num * PAGE_SIZE,
-				       VM_READ | VM_MAYREAD, &vdso_spec[0]);
-	if (IS_ERR(vma)) {
-		ret = PTR_ERR(vma);
-		goto up_fail;
-	}
-
-	/*Map vdata to user space */
-	ret = io_remap_pfn_range(vma, vdso_base,
-				 virt_to_phys(vdso_data) >> PAGE_SHIFT,
-				 PAGE_SIZE, vma->vm_page_prot);
-	if (ret)
-		goto up_fail;
-
-	/*Map timer to user space */
-	vdso_base += PAGE_SIZE;
-	prot = __pgprot(_PAGE_V | _PAGE_M_UR_KR | _PAGE_D |  _PAGE_C_DEV);
-	ret = io_remap_pfn_range(vma, vdso_base, timer_mapping_base >> PAGE_SHIFT,
-				 PAGE_SIZE, prot);
-	if (ret)
-		goto up_fail;
-
-	/*Map vdso to user space */
-	vdso_base += PAGE_SIZE;
-	mm->context.vdso = (void *)vdso_base;
-	vma = _install_special_mapping(mm, vdso_base, vdso_text_len,
-				       VM_READ | VM_EXEC |
-				       VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC,
-				       &vdso_spec[1]);
-	if (IS_ERR(vma)) {
-		ret = PTR_ERR(vma);
-		goto up_fail;
-	}
-
-	mmap_write_unlock(mm);
-	return 0;
-
-up_fail:
-	mm->context.vdso = NULL;
-	mmap_write_unlock(mm);
-	return ret;
-}
-
-static void vdso_write_begin(struct vdso_data *vdata)
-{
-	++vdso_data->seq_count;
-	smp_wmb();		/* Pairs with smp_rmb in vdso_read_retry */
-}
-
-static void vdso_write_end(struct vdso_data *vdata)
-{
-	smp_wmb();		/* Pairs with smp_rmb in vdso_read_begin */
-	++vdso_data->seq_count;
-}
-
-void update_vsyscall(struct timekeeper *tk)
-{
-	vdso_write_begin(vdso_data);
-	vdso_data->cs_mask = tk->tkr_mono.mask;
-	vdso_data->cs_mult = tk->tkr_mono.mult;
-	vdso_data->cs_shift = tk->tkr_mono.shift;
-	vdso_data->cs_cycle_last = tk->tkr_mono.cycle_last;
-	vdso_data->wtm_clock_sec = tk->wall_to_monotonic.tv_sec;
-	vdso_data->wtm_clock_nsec = tk->wall_to_monotonic.tv_nsec;
-	vdso_data->xtime_clock_sec = tk->xtime_sec;
-	vdso_data->xtime_clock_nsec = tk->tkr_mono.xtime_nsec;
-	vdso_data->xtime_coarse_sec = tk->xtime_sec;
-	vdso_data->xtime_coarse_nsec = tk->tkr_mono.xtime_nsec >>
-	    tk->tkr_mono.shift;
-	vdso_data->hrtimer_res = hrtimer_resolution;
-	vdso_write_end(vdso_data);
-}
-
-void update_vsyscall_tz(void)
-{
-	vdso_data->tz_minuteswest = sys_tz.tz_minuteswest;
-	vdso_data->tz_dsttime = sys_tz.tz_dsttime;
-}
diff --git a/arch/nds32/kernel/vdso/Makefile b/arch/nds32/kernel/vdso/Makefile
deleted file mode 100644
index 55df25ef0057..000000000000
--- a/arch/nds32/kernel/vdso/Makefile
+++ /dev/null
@@ -1,79 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Building a vDSO image for AArch64.
-#
-# Author: Will Deacon <will.deacon@arm.com>
-# Heavily based on the vDSO Makefiles for other archs.
-#
-
-obj-vdso := note.o datapage.o sigreturn.o gettimeofday.o
-
-# Build rules
-targets := $(obj-vdso) vdso.so vdso.so.dbg
-obj-vdso := $(addprefix $(obj)/, $(obj-vdso))
-
-ccflags-y := -shared -fno-common -fno-builtin -nostdlib -fPIC -Wl,-shared -g \
-	-Wl,-soname=linux-vdso.so.1 -Wl,--hash-style=sysv
-
-# Disable gcov profiling for VDSO code
-GCOV_PROFILE := n
-
-
-obj-y += vdso.o
-targets += vdso.lds
-CPPFLAGS_vdso.lds += -P -C -U$(ARCH)
-
-# Force dependency
-$(obj)/vdso.o : $(obj)/vdso.so
-
-# Link rule for the .so file, .lds has to be first
-$(obj)/vdso.so.dbg: $(obj)/vdso.lds $(obj-vdso) FORCE
-	$(call if_changed,vdsold)
-
-
-# Strip rule for the .so file
-$(obj)/%.so: OBJCOPYFLAGS := -S
-$(obj)/%.so: $(obj)/%.so.dbg FORCE
-	$(call if_changed,objcopy)
-
-# Generate VDSO offsets using helper script
-gen-vdsosym := $(srctree)/$(src)/gen_vdso_offsets.sh
-quiet_cmd_vdsosym = VDSOSYM $@
-      cmd_vdsosym = $(NM) $< | $(gen-vdsosym) | LC_ALL=C sort > $@
-
-include/generated/vdso-offsets.h: $(obj)/vdso.so.dbg FORCE
-	$(call if_changed,vdsosym)
-
-
-
-# Assembly rules for the .S files
-
-sigreturn.o : sigreturn.S
-	$(call if_changed_dep,vdsoas)
-
-note.o : note.S
-	$(call if_changed_dep,vdsoas)
-
-datapage.o : datapage.S
-	$(call if_changed_dep,vdsoas)
-
-gettimeofday.o : gettimeofday.c FORCE
-	$(call if_changed_dep,vdsocc)
-
-# Actual build commands
-quiet_cmd_vdsold = VDSOL   $@
-      cmd_vdsold = $(CC) $(c_flags) -Wl,-n -Wl,-T $(real-prereqs) -o $@
-quiet_cmd_vdsoas = VDSOA   $@
-      cmd_vdsoas = $(CC) $(a_flags) -c -o $@ $<
-quiet_cmd_vdsocc = VDSOA   $@
-      cmd_vdsocc = $(CC) $(c_flags) -c -o $@ $<
-
-# Install commands for the unstripped file
-quiet_cmd_vdso_install = INSTALL $@
-      cmd_vdso_install = cp $(obj)/$@.dbg $(MODLIB)/vdso/$@
-
-vdso.so: $(obj)/vdso.so.dbg
-	@mkdir -p $(MODLIB)/vdso
-	$(call cmd,vdso_install)
-
-vdso_install: vdso.so
diff --git a/arch/nds32/kernel/vdso/datapage.S b/arch/nds32/kernel/vdso/datapage.S
deleted file mode 100644
index 4a62c3cab1c8..000000000000
--- a/arch/nds32/kernel/vdso/datapage.S
+++ /dev/null
@@ -1,21 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#include <linux/linkage.h>
-#include <asm/page.h>
-
-ENTRY(__get_timerpage)
-	sethi	$r0, hi20(. + PAGE_SIZE + 8)
-	ori	$r0, $r0, lo12(. + PAGE_SIZE + 4)
-	mfusr	$r1, $pc
-	sub	$r0, $r1, $r0
-	ret
-ENDPROC(__get_timerpage)
-
-ENTRY(__get_datapage)
-	sethi	$r0, hi20(. + 2*PAGE_SIZE + 8)
-	ori	$r0, $r0, lo12(. + 2*PAGE_SIZE + 4)
-	mfusr	$r1, $pc
-	sub	$r0, $r1, $r0
-	ret
-ENDPROC(__get_datapage)
diff --git a/arch/nds32/kernel/vdso/gettimeofday.c b/arch/nds32/kernel/vdso/gettimeofday.c
deleted file mode 100644
index 9ec03cf0ec54..000000000000
--- a/arch/nds32/kernel/vdso/gettimeofday.c
+++ /dev/null
@@ -1,269 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#include <linux/compiler.h>
-#include <linux/hrtimer.h>
-#include <linux/time.h>
-#include <asm/io.h>
-#include <asm/barrier.h>
-#include <asm/bug.h>
-#include <asm/page.h>
-#include <asm/unistd.h>
-#include <asm/vdso_datapage.h>
-#include <asm/vdso_timer_info.h>
-#include <asm/asm-offsets.h>
-
-#define X(x) #x
-#define Y(x) X(x)
-
-extern struct vdso_data *__get_datapage(void);
-extern struct vdso_data *__get_timerpage(void);
-
-static notrace unsigned int __vdso_read_begin(const struct vdso_data *vdata)
-{
-	u32 seq;
-repeat:
-	seq = READ_ONCE(vdata->seq_count);
-	if (seq & 1) {
-		cpu_relax();
-		goto repeat;
-	}
-	return seq;
-}
-
-static notrace unsigned int vdso_read_begin(const struct vdso_data *vdata)
-{
-	unsigned int seq;
-
-	seq = __vdso_read_begin(vdata);
-
-	smp_rmb();		/* Pairs with smp_wmb in vdso_write_end */
-	return seq;
-}
-
-static notrace int vdso_read_retry(const struct vdso_data *vdata, u32 start)
-{
-	smp_rmb();		/* Pairs with smp_wmb in vdso_write_begin */
-	return vdata->seq_count != start;
-}
-
-static notrace long clock_gettime_fallback(clockid_t _clkid,
-					   struct __kernel_old_timespec *_ts)
-{
-	register struct __kernel_old_timespec *ts asm("$r1") = _ts;
-	register clockid_t clkid asm("$r0") = _clkid;
-	register long ret asm("$r0");
-
-	asm volatile ("movi	$r15, %3\n"
-		      "syscall 	0x0\n"
-		      :"=r" (ret)
-		      :"r"(clkid), "r"(ts), "i"(__NR_clock_gettime)
-		      :"$r15", "memory");
-
-	return ret;
-}
-
-static notrace int do_realtime_coarse(struct __kernel_old_timespec *ts,
-				      struct vdso_data *vdata)
-{
-	u32 seq;
-
-	do {
-		seq = vdso_read_begin(vdata);
-
-		ts->tv_sec = vdata->xtime_coarse_sec;
-		ts->tv_nsec = vdata->xtime_coarse_nsec;
-
-	} while (vdso_read_retry(vdata, seq));
-	return 0;
-}
-
-static notrace int do_monotonic_coarse(struct __kernel_old_timespec *ts,
-				       struct vdso_data *vdata)
-{
-	u32 seq;
-	u64 ns;
-
-	do {
-		seq = vdso_read_begin(vdata);
-
-		ts->tv_sec = vdata->xtime_coarse_sec + vdata->wtm_clock_sec;
-		ns = vdata->xtime_coarse_nsec + vdata->wtm_clock_nsec;
-
-	} while (vdso_read_retry(vdata, seq));
-
-	ts->tv_sec += __iter_div_u64_rem(ns, NSEC_PER_SEC, &ns);
-	ts->tv_nsec = ns;
-
-	return 0;
-}
-
-static notrace inline u64 vgetsns(struct vdso_data *vdso)
-{
-	u32 cycle_now;
-	u32 cycle_delta;
-	u32 *timer_cycle_base;
-
-	timer_cycle_base =
-	    (u32 *) ((char *)__get_timerpage() + vdso->cycle_count_offset);
-	cycle_now = readl_relaxed(timer_cycle_base);
-	if (true == vdso->cycle_count_down)
-		cycle_now = ~(*timer_cycle_base);
-	cycle_delta = cycle_now - (u32) vdso->cs_cycle_last;
-	return ((u64) cycle_delta & vdso->cs_mask) * vdso->cs_mult;
-}
-
-static notrace int do_realtime(struct __kernel_old_timespec *ts, struct vdso_data *vdata)
-{
-	unsigned count;
-	u64 ns;
-	do {
-		count = vdso_read_begin(vdata);
-		ts->tv_sec = vdata->xtime_clock_sec;
-		ns = vdata->xtime_clock_nsec;
-		ns += vgetsns(vdata);
-		ns >>= vdata->cs_shift;
-	} while (vdso_read_retry(vdata, count));
-
-	ts->tv_sec += __iter_div_u64_rem(ns, NSEC_PER_SEC, &ns);
-	ts->tv_nsec = ns;
-
-	return 0;
-}
-
-static notrace int do_monotonic(struct __kernel_old_timespec *ts, struct vdso_data *vdata)
-{
-	u64 ns;
-	u32 seq;
-
-	do {
-		seq = vdso_read_begin(vdata);
-
-		ts->tv_sec = vdata->xtime_clock_sec;
-		ns = vdata->xtime_clock_nsec;
-		ns += vgetsns(vdata);
-		ns >>= vdata->cs_shift;
-
-		ts->tv_sec += vdata->wtm_clock_sec;
-		ns += vdata->wtm_clock_nsec;
-
-	} while (vdso_read_retry(vdata, seq));
-
-	ts->tv_sec += __iter_div_u64_rem(ns, NSEC_PER_SEC, &ns);
-	ts->tv_nsec = ns;
-
-	return 0;
-}
-
-notrace int __vdso_clock_gettime(clockid_t clkid, struct __kernel_old_timespec *ts)
-{
-	struct vdso_data *vdata;
-	int ret = -1;
-
-	vdata = __get_datapage();
-	if (vdata->cycle_count_offset == EMPTY_REG_OFFSET)
-		return clock_gettime_fallback(clkid, ts);
-
-	switch (clkid) {
-	case CLOCK_REALTIME_COARSE:
-		ret = do_realtime_coarse(ts, vdata);
-		break;
-	case CLOCK_MONOTONIC_COARSE:
-		ret = do_monotonic_coarse(ts, vdata);
-		break;
-	case CLOCK_REALTIME:
-		ret = do_realtime(ts, vdata);
-		break;
-	case CLOCK_MONOTONIC:
-		ret = do_monotonic(ts, vdata);
-		break;
-	default:
-		break;
-	}
-
-	if (ret)
-		ret = clock_gettime_fallback(clkid, ts);
-
-	return ret;
-}
-
-static notrace int clock_getres_fallback(clockid_t _clk_id,
-					  struct __kernel_old_timespec *_res)
-{
-	register clockid_t clk_id asm("$r0") = _clk_id;
-	register struct __kernel_old_timespec *res asm("$r1") = _res;
-	register int ret asm("$r0");
-
-	asm volatile ("movi	$r15, %3\n"
-		      "syscall	0x0\n"
-		      :"=r" (ret)
-		      :"r"(clk_id), "r"(res), "i"(__NR_clock_getres)
-		      :"$r15", "memory");
-
-	return ret;
-}
-
-notrace int __vdso_clock_getres(clockid_t clk_id, struct __kernel_old_timespec *res)
-{
-	struct vdso_data *vdata = __get_datapage();
-
-	if (res == NULL)
-		return 0;
-	switch (clk_id) {
-	case CLOCK_REALTIME:
-	case CLOCK_MONOTONIC:
-	case CLOCK_MONOTONIC_RAW:
-		res->tv_sec = 0;
-		res->tv_nsec = vdata->hrtimer_res;
-		break;
-	case CLOCK_REALTIME_COARSE:
-	case CLOCK_MONOTONIC_COARSE:
-		res->tv_sec = 0;
-		res->tv_nsec = CLOCK_COARSE_RES;
-		break;
-	default:
-		return clock_getres_fallback(clk_id, res);
-	}
-	return 0;
-}
-
-static notrace inline int gettimeofday_fallback(struct __kernel_old_timeval *_tv,
-						struct timezone *_tz)
-{
-	register struct __kernel_old_timeval *tv asm("$r0") = _tv;
-	register struct timezone *tz asm("$r1") = _tz;
-	register int ret asm("$r0");
-
-	asm volatile ("movi	$r15, %3\n"
-		      "syscall	0x0\n"
-		      :"=r" (ret)
-		      :"r"(tv), "r"(tz), "i"(__NR_gettimeofday)
-		      :"$r15", "memory");
-
-	return ret;
-}
-
-notrace int __vdso_gettimeofday(struct __kernel_old_timeval *tv, struct timezone *tz)
-{
-	struct __kernel_old_timespec ts;
-	struct vdso_data *vdata;
-	int ret;
-
-	vdata = __get_datapage();
-
-	if (vdata->cycle_count_offset == EMPTY_REG_OFFSET)
-		return gettimeofday_fallback(tv, tz);
-
-	ret = do_realtime(&ts, vdata);
-
-	if (tv) {
-		tv->tv_sec = ts.tv_sec;
-		tv->tv_usec = ts.tv_nsec / 1000;
-	}
-	if (tz) {
-		tz->tz_minuteswest = vdata->tz_minuteswest;
-		tz->tz_dsttime = vdata->tz_dsttime;
-	}
-
-	return ret;
-}
diff --git a/arch/nds32/kernel/vdso/note.S b/arch/nds32/kernel/vdso/note.S
deleted file mode 100644
index 0aeaa19b05f0..000000000000
--- a/arch/nds32/kernel/vdso/note.S
+++ /dev/null
@@ -1,11 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2012 ARM Limited
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#include <linux/uts.h>
-#include <linux/version.h>
-#include <linux/elfnote.h>
-
-ELFNOTE_START(Linux, 0, "a")
-	.long LINUX_VERSION_CODE
-ELFNOTE_END
diff --git a/arch/nds32/kernel/vdso/sigreturn.S b/arch/nds32/kernel/vdso/sigreturn.S
deleted file mode 100644
index 67e4d1d1612a..000000000000
--- a/arch/nds32/kernel/vdso/sigreturn.S
+++ /dev/null
@@ -1,19 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2012 ARM Limited
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#include <linux/linkage.h>
-#include <asm/unistd.h>
-
-	.text
-
-ENTRY(__kernel_rt_sigreturn)
-	.cfi_startproc
-	movi $r15, __NR_rt_sigreturn
-	/*
-	 * The SWID of syscall should be __NR_rt_sigreturn to synchronize
-	 * the unwinding scheme in gcc
-	 */
-	syscall	__NR_rt_sigreturn
-	.cfi_endproc
-ENDPROC(__kernel_rt_sigreturn)
diff --git a/arch/nds32/kernel/vdso/vdso.S b/arch/nds32/kernel/vdso/vdso.S
deleted file mode 100644
index 16737c11e55b..000000000000
--- a/arch/nds32/kernel/vdso/vdso.S
+++ /dev/null
@@ -1,18 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2012 ARM Limited
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#include <linux/init.h>
-#include <linux/linkage.h>
-#include <linux/const.h>
-#include <asm/page.h>
-
-	.globl vdso_start, vdso_end
-	.section .rodata
-	.balign PAGE_SIZE
-vdso_start:
-	.incbin "arch/nds32/kernel/vdso/vdso.so"
-	.balign PAGE_SIZE
-vdso_end:
-
-	.previous
diff --git a/arch/nds32/kernel/vdso/vdso.lds.S b/arch/nds32/kernel/vdso/vdso.lds.S
deleted file mode 100644
index 1f2b16004594..000000000000
--- a/arch/nds32/kernel/vdso/vdso.lds.S
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * SPDX-License-Identifier: GPL-2.0
- * Copyright (C) 2005-2017 Andes Technology Corporation
- */
-
-
-#include <linux/const.h>
-#include <asm/page.h>
-#include <asm/vdso.h>
-
-OUTPUT_ARCH(nds32)
-
-SECTIONS
-{
-	. = SIZEOF_HEADERS;
-
-	.hash		: { *(.hash) }			:text
-	.gnu.hash	: { *(.gnu.hash) }
-	.dynsym		: { *(.dynsym) }
-	.dynstr		: { *(.dynstr) }
-	.gnu.version	: { *(.gnu.version) }
-	.gnu.version_d	: { *(.gnu.version_d) }
-	.gnu.version_r	: { *(.gnu.version_r) }
-
-	.note		: { *(.note.*) }		:text	:note
-
-
-	.text		: { *(.text*) }			:text
-
-	.eh_frame_hdr	: { *(.eh_frame_hdr) }		:text	:eh_frame_hdr
-	.eh_frame	: { KEEP (*(.eh_frame)) }	:text
-
-	.dynamic	: { *(.dynamic) }		:text	:dynamic
-
-	.rodata		: { *(.rodata*) }		:text
-
-
-	/DISCARD/	: {
-		*(.note.GNU-stack)
-		*(.data .data.* .gnu.linkonce.d.* .sdata*)
-		*(.bss .sbss .dynbss .dynsbss)
-	}
-}
-
-/*
- * We must supply the ELF program headers explicitly to get just one
- * PT_LOAD segment, and set the flags explicitly to make segments read-only.
- */
-PHDRS
-{
-	text		PT_LOAD		FLAGS(5) FILEHDR PHDRS; /* PF_R|PF_X */
-	dynamic		PT_DYNAMIC	FLAGS(4);		/* PF_R */
-	note		PT_NOTE		FLAGS(4);		/* PF_R */
-	eh_frame_hdr	PT_GNU_EH_FRAME;
-}
-
-/*
- * This controls what symbols we export from the DSO.
- */
-VERSION
-{
-	LINUX_4 {
-	global:
-		__kernel_rt_sigreturn;
-		__vdso_gettimeofday;
-		__vdso_clock_getres;
-		__vdso_clock_gettime;
-	local: *;
-	};
-}
-
-/*
- * Make the rt_sigreturn code visible to the kernel.
- */
-VDSO_rt_sigtramp	= __kernel_rt_sigreturn;
diff --git a/arch/nds32/kernel/vmlinux.lds.S b/arch/nds32/kernel/vmlinux.lds.S
deleted file mode 100644
index 6a91b965fb1e..000000000000
--- a/arch/nds32/kernel/vmlinux.lds.S
+++ /dev/null
@@ -1,70 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#include <asm/page.h>
-#include <asm/thread_info.h>
-#include <asm/cache.h>
-#include <asm/memory.h>
-
-#define LOAD_OFFSET	(PAGE_OFFSET - PHYS_OFFSET)
-#include <asm-generic/vmlinux.lds.h>
-
-OUTPUT_ARCH(nds32)
-ENTRY(_stext_lma)
-jiffies = jiffies_64;
-
-#if defined(CONFIG_GCOV_KERNEL)
-#define NDS32_EXIT_KEEP(x)	x
-#else
-#define NDS32_EXIT_KEEP(x)
-#endif
-
-SECTIONS
-{
-	_stext_lma = TEXTADDR - LOAD_OFFSET;
-	. = TEXTADDR;
-	__init_begin = .;
-	HEAD_TEXT_SECTION
-	.exit.text : {
-		NDS32_EXIT_KEEP(EXIT_TEXT)
-	}
-	INIT_TEXT_SECTION(PAGE_SIZE)
-	INIT_DATA_SECTION(16)
-	.exit.data : {
-		NDS32_EXIT_KEEP(EXIT_DATA)
-	}
-	PERCPU_SECTION(L1_CACHE_BYTES)
-	__init_end = .;
-
-	. = ALIGN(PAGE_SIZE);
-	_stext = .;
-	/* Real text segment */
-	.text : AT(ADDR(.text) - LOAD_OFFSET) {
-		_text = .;		/* Text and read-only data	*/
-		TEXT_TEXT
-		SCHED_TEXT
-		CPUIDLE_TEXT
-		LOCK_TEXT
-		KPROBES_TEXT
-		IRQENTRY_TEXT
-		SOFTIRQENTRY_TEXT
-		*(.fixup)
-	}
-
-	_etext = .;			/* End of text and rodata section */
-
-	_sdata = .;
-	RO_DATA(PAGE_SIZE)
-	RW_DATA(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
-	_edata  =  .;
-
-	EXCEPTION_TABLE(16)
-	BSS_SECTION(4, 4, 4)
-	_end = .;
-
-	STABS_DEBUG
-	DWARF_DEBUG
-	ELF_DETAILS
-
-	DISCARDS
-}
diff --git a/arch/nds32/lib/Makefile b/arch/nds32/lib/Makefile
deleted file mode 100644
index dddbc15d6b37..000000000000
--- a/arch/nds32/lib/Makefile
+++ /dev/null
@@ -1,4 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-lib-y		:= copy_page.o memcpy.o memmove.o   \
-		   memset.o memzero.o \
-		   copy_from_user.o copy_to_user.o clear_user.o
diff --git a/arch/nds32/lib/clear_user.S b/arch/nds32/lib/clear_user.S
deleted file mode 100644
index 805dfcd25bf8..000000000000
--- a/arch/nds32/lib/clear_user.S
+++ /dev/null
@@ -1,42 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <asm/errno.h>
-
-/* Prototype: int __arch_clear_user(void *addr, size_t sz)
- * Purpose  : clear some user memory
- * Params   : addr - user memory address to clear
- *          : sz   - number of bytes to clear
- * Returns  : number of bytes NOT cleared
- */
-	.text
-	.align	5
-ENTRY(__arch_clear_user)
-	add	$r5, $r0, $r1
-	beqz	$r1, clear_exit
-	xor	$p1, $p1, $p1		! Use $p1=0 to clear mem
-	srli	$p0, $r1, #2		! $p0 = number of word to clear
-	andi	$r1, $r1, #3		! Bytes less than a word to copy
-	beqz	$p0, byte_clear		! Only less than a word to clear
-word_clear:
-USER(	smw.bim,$p1, [$r0], $p1)	! Clear the word
-	addi	$p0, $p0, #-1		! Decrease word count
-	bnez	$p0, word_clear		! Continue looping to clear all words
-	beqz	$r1, clear_exit		! No left bytes to copy
-byte_clear:
-USER(	sbi.bi,	$p1, [$r0], #1)		! Clear the byte
-	addi	$r1, $r1, #-1		! Decrease byte count
-	bnez	$r1, byte_clear		! Continue looping to clear all left bytes
-clear_exit:
-	move	$r0, $r1		! Set return value
-	ret
-
-	.section .fixup,"ax"
-	.align	0
-9001:
-	sub	$r0, $r5, $r0		! Bytes left to copy
-	ret
-	.previous
-ENDPROC(__arch_clear_user)
diff --git a/arch/nds32/lib/copy_from_user.S b/arch/nds32/lib/copy_from_user.S
deleted file mode 100644
index ad1857b20067..000000000000
--- a/arch/nds32/lib/copy_from_user.S
+++ /dev/null
@@ -1,45 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <asm/errno.h>
-
-.macro 	lbi1 dst, addr, adj
-USER( lbi.bi, \dst, [\addr], \adj)
-.endm
-
-.macro 	sbi1 src, addr, adj
-sbi.bi	\src, [\addr], \adj
-.endm
-
-.macro	lmw1 start_reg, addr, end_reg
-USER( lmw.bim, \start_reg, [\addr], \end_reg)
-.endm
-
-.macro	smw1 start_reg, addr, end_reg
-smw.bim \start_reg, [\addr], \end_reg
-.endm
-
-
-/* Prototype: int __arch_copy_from_user(void *to, const char *from, size_t n)
- * Purpose  : copy a block from user memory to kernel memory
- * Params   : to   - kernel memory
- *          : from - user memory
- *          : n    - number of bytes to copy
- * Returns  : Number of bytes NOT copied.
- */
-
-.text
-ENTRY(__arch_copy_from_user)
-	add	$r5, $r0, $r2
-#include "copy_template.S"
-	move	$r0, $r2
-	ret
-.section .fixup,"ax"
-.align  2
-9001:
-	sub	$r0, $r5, $r0
-	ret
-.previous
-ENDPROC(__arch_copy_from_user)
diff --git a/arch/nds32/lib/copy_page.S b/arch/nds32/lib/copy_page.S
deleted file mode 100644
index f8701ed161a8..000000000000
--- a/arch/nds32/lib/copy_page.S
+++ /dev/null
@@ -1,40 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#include <linux/linkage.h>
-#include <asm/export.h>
-#include <asm/page.h>
-
-	.text
-ENTRY(copy_page)
-	pushm	$r2, $r10
-	movi	$r2, PAGE_SIZE >> 5
-.Lcopy_loop:
-	lmw.bim	$r3, [$r1], $r10
-	smw.bim	$r3, [$r0], $r10
-	subi45	$r2, #1
-	bnez38	$r2, .Lcopy_loop
-	popm	$r2, $r10
-	ret
-ENDPROC(copy_page)
-EXPORT_SYMBOL(copy_page)
-
-ENTRY(clear_page)
-	pushm	$r1, $r9
-	movi	$r1, PAGE_SIZE >> 5
-	movi55	$r2, #0
-	movi55	$r3, #0
-	movi55	$r4, #0
-	movi55	$r5, #0
-	movi55	$r6, #0
-	movi55	$r7, #0
-	movi55	$r8, #0
-	movi55	$r9, #0
-.Lclear_loop:
-	smw.bim	$r2, [$r0], $r9
-	subi45	$r1, #1
-	bnez38	$r1, .Lclear_loop
-	popm	$r1, $r9
-        ret
-ENDPROC(clear_page)
-EXPORT_SYMBOL(clear_page)
diff --git a/arch/nds32/lib/copy_template.S b/arch/nds32/lib/copy_template.S
deleted file mode 100644
index 3a9a2de468c2..000000000000
--- a/arch/nds32/lib/copy_template.S
+++ /dev/null
@@ -1,69 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-
-	beq	$r1, $r0, quit_memcpy
-	beqz	$r2, quit_memcpy
-	srli    $r3, $r2, #5	! check if len < cache-line size 32
-	beqz	$r3, word_copy_entry
-	andi	$r4, $r0, #0x3	! check byte-align
-	beqz	$r4, unalign_word_copy_entry
-
-	addi	$r4, $r4,#-4
-	abs	$r4, $r4	! check how many un-align byte to copy
-	sub	$r2, $r2, $r4	! update $R2
-
-unalign_byte_copy:
-	lbi1	$r3, $r1, #1
-	addi	$r4, $r4, #-1
-	sbi1	$r3, $r0, #1
-	bnez	$r4, unalign_byte_copy
-	beqz	$r2, quit_memcpy
-
-unalign_word_copy_entry:
-	andi	$r3, $r0, 0x1f	! check cache-line unaligncount
-	beqz	$r3, cache_copy
-
-	addi	$r3, $r3, #-32
-	abs	$r3, $r3
-	sub	$r2, $r2, $r3	! update $R2
-
-unalign_word_copy:
-	lmw1	$r4, $r1, $r4
-	addi	$r3, $r3, #-4
-	smw1	$r4, $r0, $r4
-	bnez	$r3, unalign_word_copy
-	beqz	$r2, quit_memcpy
-
-	addi	$r3, $r2, #-32	! to check $r2< cache_line , than go to word_copy
-	bltz	$r3, word_copy_entry
-cache_copy:
-	srli	$r3, $r2, #5
-	beqz	$r3, word_copy_entry
-3:
-	lmw1	$r17, $r1, $r24
-	addi	$r3, $r3, #-1
-	smw1	$r17, $r0, $r24
-	bnez	$r3, 3b
-
-word_copy_entry:
-	andi	$r2, $r2, #31
-
-	beqz	$r2, quit_memcpy
-5:
-	srli	$r3, $r2, #2
-	beqz	$r3, byte_copy
-word_copy:
-	lmw1	$r4, $r1, $r4
-	addi	$r3, $r3, #-1
-	smw1	$r4, $r0, $r4
-	bnez	$r3, word_copy
-	andi	$r2, $r2, #3
-	beqz	$r2, quit_memcpy
-byte_copy:
-	lbi1	$r3, $r1, #1
-	addi	$r2, $r2, #-1
-
-	sbi1	$r3, $r0, #1
-	bnez	$r2, byte_copy
-quit_memcpy:
diff --git a/arch/nds32/lib/copy_to_user.S b/arch/nds32/lib/copy_to_user.S
deleted file mode 100644
index 3230044dcfb8..000000000000
--- a/arch/nds32/lib/copy_to_user.S
+++ /dev/null
@@ -1,45 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <asm/errno.h>
-
-.macro 	lbi1 dst, addr, adj
-lbi.bi	\dst, [\addr], \adj
-.endm
-
-.macro 	sbi1 src, addr, adj
-USER( sbi.bi, \src, [\addr], \adj)
-.endm
-
-.macro	lmw1 start_reg, addr, end_reg
-lmw.bim \start_reg, [\addr], \end_reg
-.endm
-
-.macro	smw1 start_reg, addr, end_reg
-USER( smw.bim, \start_reg, [\addr], \end_reg)
-.endm
-
-
-/* Prototype: int __arch_copy_to_user(void *to, const char *from, size_t n)
- * Purpose  : copy a block to user memory from kernel memory
- * Params   : to   - user memory
- *          : from - kernel memory
- *          : n    - number of bytes to copy
- * Returns  : Number of bytes NOT copied.
- */
-
-.text
-ENTRY(__arch_copy_to_user)
-	add	$r5, $r0, $r2
-#include "copy_template.S"
-	move	$r0, $r2
-	ret
-.section .fixup,"ax"
-.align  2
-9001:
-	sub	$r0, $r5, $r0
-	ret
-.previous
-ENDPROC(__arch_copy_to_user)
diff --git a/arch/nds32/lib/memcpy.S b/arch/nds32/lib/memcpy.S
deleted file mode 100644
index a2345ea721e4..000000000000
--- a/arch/nds32/lib/memcpy.S
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#include <linux/linkage.h>
-
-
-.macro 	lbi1 dst, addr, adj
-lbi.bi	\dst, [\addr], \adj
-.endm
-
-.macro 	sbi1 src, addr, adj
-sbi.bi	\src, [\addr], \adj
-.endm
-
-.macro	lmw1 start_reg, addr, end_reg
-lmw.bim \start_reg, [\addr], \end_reg
-.endm
-
-.macro	smw1 start_reg, addr, end_reg
-smw.bim \start_reg, [\addr], \end_reg
-.endm
-
-.text
-ENTRY(memcpy)
-	move	$r5, $r0
-#include "copy_template.S"
-	move	$r0, $r5
-	ret
-
-ENDPROC(memcpy)
diff --git a/arch/nds32/lib/memmove.S b/arch/nds32/lib/memmove.S
deleted file mode 100644
index c823aada2271..000000000000
--- a/arch/nds32/lib/memmove.S
+++ /dev/null
@@ -1,70 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#include <linux/linkage.h>
-
-/*
-  void *memmove(void *dst, const void *src, int n);
-
-  dst: $r0
-  src: $r1
-  n  : $r2
-  ret: $r0 - pointer to the memory area dst.
-*/
-	.text
-
-ENTRY(memmove)
-	move	$r5, $r0		! Set return value = det
-	beq	$r0, $r1, exit_memcpy	! Exit when det = src
-	beqz	$r2, exit_memcpy	! Exit when n = 0
-	pushm	$t0, $t1		! Save reg
-	srli	$p1, $r2, #2		! $p1 is how many words to copy
-
-	! Avoid data lost when memory overlap
-	! Copy data reversely when src < dst
-	slt	$p0, $r0, $r1		! check if $r0 < $r1
-	beqz	$p0, do_reverse		! branch if dst > src
-
-	! No reverse, dst < src
-	andi	$r2, $r2, #3		! How many bytes are less than a word
-	li	$t0, #1			! Determining copy direction in byte_cpy
-	beqz	$p1, byte_cpy		! When n is less than a word
-
-word_cpy:
-	lmw.bim	$p0, [$r1], $p0		! Read a word from src
-	addi	$p1, $p1, #-1		! How many words left to copy
-	smw.bim	$p0, [$r0], $p0		! Copy the word to det
-	bnez	$p1, word_cpy		! If remained words > 0
-	beqz	$r2, end_memcpy		! No left bytes to copy
-	b	byte_cpy
-
-do_reverse:
-	add	$r0, $r0, $r2		! Start with the end of $r0
-	add	$r1, $r1, $r2		! Start with the end of $r1
-	andi	$r2, $r2, #3		! How many bytes are less than a word
-	li	$t0, #-1		! Determining copy direction in byte_cpy
-	beqz	$p1, reverse_byte_cpy	! When n is less than a word
-
-reverse_word_cpy:
-	lmw.adm	$p0, [$r1], $p0		! Read a word from src
-	addi	$p1, $p1, #-1		! How many words left to copy
-	smw.adm	$p0, [$r0], $p0		! Copy the word to det
-	bnez	$p1, reverse_word_cpy	! If remained words > 0
-	beqz	$r2, end_memcpy		! No left bytes to copy
-
-reverse_byte_cpy:
-	addi	$r0, $r0, #-1
-	addi	$r1, $r1, #-1
-byte_cpy:				! Less than 4 bytes to copy now
-	lb.bi	$p0, [$r1], $t0		! Read a byte from src
-	addi	$r2, $r2, #-1		! How many bytes left to copy
-	sb.bi	$p0, [$r0], $t0		! copy the byte to det
-	bnez	$r2, byte_cpy		! If remained bytes > 0
-
-end_memcpy:
-	popm	$t0, $t1
-exit_memcpy:
-	move	$r0, $r5
-	ret
-
-ENDPROC(memmove)
diff --git a/arch/nds32/lib/memset.S b/arch/nds32/lib/memset.S
deleted file mode 100644
index 193cb6ce21a9..000000000000
--- a/arch/nds32/lib/memset.S
+++ /dev/null
@@ -1,33 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#include <linux/linkage.h>
-
-	.text
-ENTRY(memset)
-	move	$r5, $r0		! Return value
-	beqz	$r2, end_memset		! Exit when len = 0
-	srli	$p1, $r2, 2		! $p1 is how many words to copy
-	andi	$r2, $r2, 3		! How many bytes are less than a word
-	beqz	$p1, byte_set		! When n is less than a word
-
-	! set $r1 from ??????ab to abababab
-	andi	$r1, $r1, #0x00ff	! $r1 = 000000ab
-	slli	$p0, $r1, #8		! $p0 = 0000ab00
-	or	$r1, $r1, $p0		! $r1 = 0000abab
-	slli	$p0, $r1, #16		! $p0 = abab0000
-	or	$r1, $r1, $p0		! $r1 = abababab
-word_set:
-	addi	$p1, $p1, #-1		! How many words left to copy
-	smw.bim	$r1, [$r0], $r1		! Copy the word to det
-	bnez	$p1, word_set		! Still words to set, continue looping
-	beqz	$r2, end_memset		! No left byte to set
-byte_set:				! Less than 4 bytes left to set
-	addi	$r2, $r2, #-1		! Decrease len by 1
-	sbi.bi	$r1, [$r0], #1		! Set data of the next byte to $r1
-	bnez	$r2, byte_set		! Still bytes left to set
-end_memset:
-	move	$r0, $r5
-	ret
-
-ENDPROC(memset)
diff --git a/arch/nds32/lib/memzero.S b/arch/nds32/lib/memzero.S
deleted file mode 100644
index f055972c9343..000000000000
--- a/arch/nds32/lib/memzero.S
+++ /dev/null
@@ -1,18 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#include <linux/linkage.h>
-
-	.text
-ENTRY(memzero)
-	beqz	$r1, 1f
-	push	$lp
-	move    $r2, $r1
-	move    $r1, #0
-	push	$r0
-	bal     memset
-	pop	$r0
-	pop	$lp
-1:
-        ret
-ENDPROC(memzero)
diff --git a/arch/nds32/math-emu/Makefile b/arch/nds32/math-emu/Makefile
deleted file mode 100644
index 3bed7e5d5d05..000000000000
--- a/arch/nds32/math-emu/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Makefile for the Linux/nds32 kernel FPU emulation.
-#
-
-obj-y	:= fpuemu.o \
-	   fdivd.o fmuld.o fsubd.o faddd.o fs2d.o fsqrtd.o fcmpd.o fnegs.o \
-	   fd2si.o fd2ui.o fd2siz.o fd2uiz.o fsi2d.o fui2d.o \
-	   fdivs.o fmuls.o fsubs.o fadds.o fd2s.o fsqrts.o fcmps.o fnegd.o \
-	   fs2si.o fs2ui.o fs2siz.o fs2uiz.o fsi2s.o fui2s.o
diff --git a/arch/nds32/math-emu/faddd.c b/arch/nds32/math-emu/faddd.c
deleted file mode 100644
index f7fd4e3c3904..000000000000
--- a/arch/nds32/math-emu/faddd.c
+++ /dev/null
@@ -1,24 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2018 Andes Technology Corporation
-#include <linux/uaccess.h>
-
-#include <asm/sfp-machine.h>
-#include <math-emu/soft-fp.h>
-#include <math-emu/double.h>
-void faddd(void *ft, void *fa, void *fb)
-{
-	FP_DECL_D(A);
-	FP_DECL_D(B);
-	FP_DECL_D(R);
-	FP_DECL_EX;
-
-	FP_UNPACK_DP(A, fa);
-	FP_UNPACK_DP(B, fb);
-
-	FP_ADD_D(R, A, B);
-
-	FP_PACK_DP(ft, R);
-
-	__FPU_FPCSR |= FP_CUR_EXCEPTIONS;
-
-}
diff --git a/arch/nds32/math-emu/fadds.c b/arch/nds32/math-emu/fadds.c
deleted file mode 100644
index f5af6ca8cca5..000000000000
--- a/arch/nds32/math-emu/fadds.c
+++ /dev/null
@@ -1,24 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2018 Andes Technology Corporation
-#include <linux/uaccess.h>
-
-#include <asm/sfp-machine.h>
-#include <math-emu/soft-fp.h>
-#include <math-emu/single.h>
-void fadds(void *ft, void *fa, void *fb)
-{
-	FP_DECL_S(A);
-	FP_DECL_S(B);
-	FP_DECL_S(R);
-	FP_DECL_EX;
-
-	FP_UNPACK_SP(A, fa);
-	FP_UNPACK_SP(B, fb);
-
-	FP_ADD_S(R, A, B);
-
-	FP_PACK_SP(ft, R);
-
-	__FPU_FPCSR |= FP_CUR_EXCEPTIONS;
-
-}
diff --git a/arch/nds32/math-emu/fcmpd.c b/arch/nds32/math-emu/fcmpd.c
deleted file mode 100644
index 0ea225abe880..000000000000
--- a/arch/nds32/math-emu/fcmpd.c
+++ /dev/null
@@ -1,24 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2018 Andes Technology Corporation
-#include <asm/sfp-machine.h>
-#include <math-emu/soft-fp.h>
-#include <math-emu/double.h>
-int fcmpd(void *ft, void *fa, void *fb, int cmpop)
-{
-	FP_DECL_D(A);
-	FP_DECL_D(B);
-	FP_DECL_EX;
-	long cmp;
-
-	FP_UNPACK_DP(A, fa);
-	FP_UNPACK_DP(B, fb);
-
-	FP_CMP_D(cmp, A, B, SF_CUN);
-	cmp += 2;
-	if (cmp == SF_CGT)
-		*(long *)ft = 0;
-	else
-		*(long *)ft = (cmp & cmpop) ? 1 : 0;
-
-	return 0;
-}
diff --git a/arch/nds32/math-emu/fcmps.c b/arch/nds32/math-emu/fcmps.c
deleted file mode 100644
index 681480758213..000000000000
--- a/arch/nds32/math-emu/fcmps.c
+++ /dev/null
@@ -1,24 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2018 Andes Technology Corporation
-#include <asm/sfp-machine.h>
-#include <math-emu/soft-fp.h>
-#include <math-emu/single.h>
-int fcmps(void *ft, void *fa, void *fb, int cmpop)
-{
-	FP_DECL_S(A);
-	FP_DECL_S(B);
-	FP_DECL_EX;
-	long cmp;
-
-	FP_UNPACK_SP(A, fa);
-	FP_UNPACK_SP(B, fb);
-
-	FP_CMP_S(cmp, A, B, SF_CUN);
-	cmp += 2;
-	if (cmp == SF_CGT)
-		*(int *)ft = 0x0;
-	else
-		*(int *)ft = (cmp & cmpop) ? 0x1 : 0x0;
-
-	return 0;
-}
diff --git a/arch/nds32/math-emu/fd2s.c b/arch/nds32/math-emu/fd2s.c
deleted file mode 100644
index 1328371e8170..000000000000
--- a/arch/nds32/math-emu/fd2s.c
+++ /dev/null
@@ -1,22 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2018 Andes Technology Corporation
-#include <linux/uaccess.h>
-
-#include <asm/sfp-machine.h>
-#include <math-emu/double.h>
-#include <math-emu/single.h>
-#include <math-emu/soft-fp.h>
-void fd2s(void *ft, void *fa)
-{
-	FP_DECL_D(A);
-	FP_DECL_S(R);
-	FP_DECL_EX;
-
-	FP_UNPACK_DP(A, fa);
-
-	FP_CONV(S, D, 1, 2, R, A);
-
-	FP_PACK_SP(ft, R);
-
-	__FPU_FPCSR |= FP_CUR_EXCEPTIONS;
-}
diff --git a/arch/nds32/math-emu/fd2si.c b/arch/nds32/math-emu/fd2si.c
deleted file mode 100644
index fae3e16a0a10..000000000000
--- a/arch/nds32/math-emu/fd2si.c
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2019 Andes Technology Corporation
-#include <linux/uaccess.h>
-
-#include <asm/sfp-machine.h>
-#include <math-emu/soft-fp.h>
-#include <math-emu/double.h>
-
-void fd2si(void *ft, void *fa)
-{
-	int r;
-
-	FP_DECL_D(A);
-	FP_DECL_EX;
-
-	FP_UNPACK_DP(A, fa);
-
-	if (A_c == FP_CLS_INF) {
-		*(int *)ft = (A_s == 0) ? 0x7fffffff : 0x80000000;
-		__FPU_FPCSR |= FP_EX_INVALID;
-	} else if (A_c == FP_CLS_NAN) {
-		*(int *)ft = 0xffffffff;
-		__FPU_FPCSR |= FP_EX_INVALID;
-	} else {
-		FP_TO_INT_ROUND_D(r, A, 32, 1);
-		__FPU_FPCSR |= FP_CUR_EXCEPTIONS;
-		*(int *)ft = r;
-	}
-
-}
diff --git a/arch/nds32/math-emu/fd2siz.c b/arch/nds32/math-emu/fd2siz.c
deleted file mode 100644
index 92fe6774f112..000000000000
--- a/arch/nds32/math-emu/fd2siz.c
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2019 Andes Technology Corporation
-#include <linux/uaccess.h>
-
-#include <asm/sfp-machine.h>
-#include <math-emu/soft-fp.h>
-#include <math-emu/double.h>
-
-void fd2si_z(void *ft, void *fa)
-{
-	int r;
-
-	FP_DECL_D(A);
-	FP_DECL_EX;
-
-	FP_UNPACK_DP(A, fa);
-
-	if (A_c == FP_CLS_INF) {
-		*(int *)ft = (A_s == 0) ? 0x7fffffff : 0x80000000;
-		__FPU_FPCSR |= FP_EX_INVALID;
-	} else if (A_c == FP_CLS_NAN) {
-		*(int *)ft = 0xffffffff;
-		__FPU_FPCSR |= FP_EX_INVALID;
-	} else {
-		FP_TO_INT_D(r, A, 32, 1);
-		__FPU_FPCSR |= FP_CUR_EXCEPTIONS;
-		*(int *)ft = r;
-	}
-
-}
diff --git a/arch/nds32/math-emu/fd2ui.c b/arch/nds32/math-emu/fd2ui.c
deleted file mode 100644
index a0423b699aa4..000000000000
--- a/arch/nds32/math-emu/fd2ui.c
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2019 Andes Technology Corporation
-#include <linux/uaccess.h>
-
-#include <asm/sfp-machine.h>
-#include <math-emu/soft-fp.h>
-#include <math-emu/double.h>
-
-void fd2ui(void *ft, void *fa)
-{
-	unsigned int r;
-
-	FP_DECL_D(A);
-	FP_DECL_EX;
-
-	FP_UNPACK_DP(A, fa);
-
-	if (A_c == FP_CLS_INF) {
-		*(unsigned int *)ft = (A_s == 0) ? 0xffffffff : 0x00000000;
-		__FPU_FPCSR |= FP_EX_INVALID;
-	} else if (A_c == FP_CLS_NAN) {
-		*(unsigned int *)ft = 0xffffffff;
-		__FPU_FPCSR |= FP_EX_INVALID;
-	} else {
-		FP_TO_INT_ROUND_D(r, A, 32, 0);
-		__FPU_FPCSR |= FP_CUR_EXCEPTIONS;
-		*(unsigned int *)ft = r;
-	}
-
-}
diff --git a/arch/nds32/math-emu/fd2uiz.c b/arch/nds32/math-emu/fd2uiz.c
deleted file mode 100644
index 8ae17cfce90d..000000000000
--- a/arch/nds32/math-emu/fd2uiz.c
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2019 Andes Technology Corporation
-#include <linux/uaccess.h>
-
-#include <asm/sfp-machine.h>
-#include <math-emu/soft-fp.h>
-#include <math-emu/double.h>
-
-void fd2ui_z(void *ft, void *fa)
-{
-	unsigned int r;
-
-	FP_DECL_D(A);
-	FP_DECL_EX;
-
-	FP_UNPACK_DP(A, fa);
-
-	if (A_c == FP_CLS_INF) {
-		*(unsigned int *)ft = (A_s == 0) ? 0xffffffff : 0x00000000;
-		__FPU_FPCSR |= FP_EX_INVALID;
-	} else if (A_c == FP_CLS_NAN) {
-		*(unsigned int *)ft = 0xffffffff;
-		__FPU_FPCSR |= FP_EX_INVALID;
-	} else {
-		FP_TO_INT_D(r, A, 32, 0);
-		__FPU_FPCSR |= FP_CUR_EXCEPTIONS;
-		*(unsigned int *)ft = r;
-	}
-
-}
diff --git a/arch/nds32/math-emu/fdivd.c b/arch/nds32/math-emu/fdivd.c
deleted file mode 100644
index 458e7e98b08e..000000000000
--- a/arch/nds32/math-emu/fdivd.c
+++ /dev/null
@@ -1,27 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2018 Andes Technology Corporation
-
-#include <linux/uaccess.h>
-#include <asm/sfp-machine.h>
-#include <math-emu/soft-fp.h>
-#include <math-emu/double.h>
-
-void fdivd(void *ft, void *fa, void *fb)
-{
-	FP_DECL_D(A);
-	FP_DECL_D(B);
-	FP_DECL_D(R);
-	FP_DECL_EX;
-
-	FP_UNPACK_DP(A, fa);
-	FP_UNPACK_DP(B, fb);
-
-	if (B_c == FP_CLS_ZERO && A_c != FP_CLS_ZERO)
-		FP_SET_EXCEPTION(FP_EX_DIVZERO);
-
-	FP_DIV_D(R, A, B);
-
-	FP_PACK_DP(ft, R);
-
-	__FPU_FPCSR |= FP_CUR_EXCEPTIONS;
-}
diff --git a/arch/nds32/math-emu/fdivs.c b/arch/nds32/math-emu/fdivs.c
deleted file mode 100644
index c7d202159ce2..000000000000
--- a/arch/nds32/math-emu/fdivs.c
+++ /dev/null
@@ -1,26 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2018 Andes Technology Corporation
-#include <linux/uaccess.h>
-
-#include <asm/sfp-machine.h>
-#include <math-emu/soft-fp.h>
-#include <math-emu/single.h>
-void fdivs(void *ft, void *fa, void *fb)
-{
-	FP_DECL_S(A);
-	FP_DECL_S(B);
-	FP_DECL_S(R);
-	FP_DECL_EX;
-
-	FP_UNPACK_SP(A, fa);
-	FP_UNPACK_SP(B, fb);
-
-	if (B_c == FP_CLS_ZERO && A_c != FP_CLS_ZERO)
-		FP_SET_EXCEPTION(FP_EX_DIVZERO);
-
-	FP_DIV_S(R, A, B);
-
-	FP_PACK_SP(ft, R);
-
-	__FPU_FPCSR |= FP_CUR_EXCEPTIONS;
-}
diff --git a/arch/nds32/math-emu/fmuld.c b/arch/nds32/math-emu/fmuld.c
deleted file mode 100644
index f3c77a45ddc2..000000000000
--- a/arch/nds32/math-emu/fmuld.c
+++ /dev/null
@@ -1,23 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2018 Andes Technology Corporation
-#include <linux/uaccess.h>
-
-#include <asm/sfp-machine.h>
-#include <math-emu/soft-fp.h>
-#include <math-emu/double.h>
-void fmuld(void *ft, void *fa, void *fb)
-{
-	FP_DECL_D(A);
-	FP_DECL_D(B);
-	FP_DECL_D(R);
-	FP_DECL_EX;
-
-	FP_UNPACK_DP(A, fa);
-	FP_UNPACK_DP(B, fb);
-
-	FP_MUL_D(R, A, B);
-
-	FP_PACK_DP(ft, R);
-
-	__FPU_FPCSR |= FP_CUR_EXCEPTIONS;
-}
diff --git a/arch/nds32/math-emu/fmuls.c b/arch/nds32/math-emu/fmuls.c
deleted file mode 100644
index cf150df938f9..000000000000
--- a/arch/nds32/math-emu/fmuls.c
+++ /dev/null
@@ -1,23 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2018 Andes Technology Corporation
-#include <linux/uaccess.h>
-
-#include <asm/sfp-machine.h>
-#include <math-emu/soft-fp.h>
-#include <math-emu/single.h>
-void fmuls(void *ft, void *fa, void *fb)
-{
-	FP_DECL_S(A);
-	FP_DECL_S(B);
-	FP_DECL_S(R);
-	FP_DECL_EX;
-
-	FP_UNPACK_SP(A, fa);
-	FP_UNPACK_SP(B, fb);
-
-	FP_MUL_S(R, A, B);
-
-	FP_PACK_SP(ft, R);
-
-	__FPU_FPCSR |= FP_CUR_EXCEPTIONS;
-}
diff --git a/arch/nds32/math-emu/fnegd.c b/arch/nds32/math-emu/fnegd.c
deleted file mode 100644
index de7ea6a0873e..000000000000
--- a/arch/nds32/math-emu/fnegd.c
+++ /dev/null
@@ -1,21 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2018 Andes Technology Corporation
-#include <linux/uaccess.h>
-
-#include <asm/sfp-machine.h>
-#include <math-emu/soft-fp.h>
-#include <math-emu/double.h>
-void fnegd(void *ft, void *fa)
-{
-	FP_DECL_D(A);
-	FP_DECL_D(R);
-	FP_DECL_EX;
-
-	FP_UNPACK_DP(A, fa);
-
-	FP_NEG_D(R, A);
-
-	FP_PACK_DP(ft, R);
-
-	__FPU_FPCSR |= FP_CUR_EXCEPTIONS;
-}
diff --git a/arch/nds32/math-emu/fnegs.c b/arch/nds32/math-emu/fnegs.c
deleted file mode 100644
index 07270b326a77..000000000000
--- a/arch/nds32/math-emu/fnegs.c
+++ /dev/null
@@ -1,21 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2018 Andes Technology Corporation
-#include <linux/uaccess.h>
-
-#include <asm/sfp-machine.h>
-#include <math-emu/soft-fp.h>
-#include <math-emu/single.h>
-void fnegs(void *ft, void *fa)
-{
-	FP_DECL_S(A);
-	FP_DECL_S(R);
-	FP_DECL_EX;
-
-	FP_UNPACK_SP(A, fa);
-
-	FP_NEG_S(R, A);
-
-	FP_PACK_SP(ft, R);
-
-	__FPU_FPCSR |= FP_CUR_EXCEPTIONS;
-}
diff --git a/arch/nds32/math-emu/fpuemu.c b/arch/nds32/math-emu/fpuemu.c
deleted file mode 100644
index 46558a15c0dc..000000000000
--- a/arch/nds32/math-emu/fpuemu.c
+++ /dev/null
@@ -1,406 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2018 Andes Technology Corporation
-
-#include <asm/bitfield.h>
-#include <asm/uaccess.h>
-#include <asm/sfp-machine.h>
-#include <asm/fpuemu.h>
-#include <asm/nds32_fpu_inst.h>
-
-#define DPFROMREG(dp, x) (dp = (void *)((unsigned long *)fpu_reg + 2*x))
-#ifdef __NDS32_EL__
-#define SPFROMREG(sp, x)\
-	((sp) = (void *)((unsigned long *)fpu_reg + (x^1)))
-#else
-#define SPFROMREG(sp, x) ((sp) = (void *)((unsigned long *)fpu_reg + x))
-#endif
-
-#define DEF3OP(name, p, f1, f2) \
-void fpemu_##name##p(void *ft, void *fa, void *fb) \
-{ \
-	f1(fa, fa, fb); \
-	f2(ft, ft, fa); \
-}
-
-#define DEF3OPNEG(name, p, f1, f2, f3) \
-void fpemu_##name##p(void *ft, void *fa, void *fb) \
-{ \
-	f1(fa, fa, fb); \
-	f2(ft, ft, fa); \
-	f3(ft, ft); \
-}
-DEF3OP(fmadd, s, fmuls, fadds);
-DEF3OP(fmsub, s, fmuls, fsubs);
-DEF3OP(fmadd, d, fmuld, faddd);
-DEF3OP(fmsub, d, fmuld, fsubd);
-DEF3OPNEG(fnmadd, s, fmuls, fadds, fnegs);
-DEF3OPNEG(fnmsub, s, fmuls, fsubs, fnegs);
-DEF3OPNEG(fnmadd, d, fmuld, faddd, fnegd);
-DEF3OPNEG(fnmsub, d, fmuld, fsubd, fnegd);
-
-static const unsigned char cmptab[8] = {
-	SF_CEQ,
-	SF_CEQ,
-	SF_CLT,
-	SF_CLT,
-	SF_CLT | SF_CEQ,
-	SF_CLT | SF_CEQ,
-	SF_CUN,
-	SF_CUN
-};
-
-enum ARGTYPE {
-	S1S = 1,
-	S2S,
-	S1D,
-	CS,
-	D1D,
-	D2D,
-	D1S,
-	CD
-};
-union func_t {
-	void (*t)(void *ft, void *fa, void *fb);
-	void (*b)(void *ft, void *fa);
-};
-/*
- * Emulate a single FPU arithmetic instruction.
- */
-static int fpu_emu(struct fpu_struct *fpu_reg, unsigned long insn)
-{
-	int rfmt;		/* resulting format */
-	union func_t func;
-	int ftype = 0;
-
-	switch (rfmt = NDS32Insn_OPCODE_COP0(insn)) {
-	case fs1_op:{
-			switch (NDS32Insn_OPCODE_BIT69(insn)) {
-			case fadds_op:
-				func.t = fadds;
-				ftype = S2S;
-				break;
-			case fsubs_op:
-				func.t = fsubs;
-				ftype = S2S;
-				break;
-			case fmadds_op:
-				func.t = fpemu_fmadds;
-				ftype = S2S;
-				break;
-			case fmsubs_op:
-				func.t = fpemu_fmsubs;
-				ftype = S2S;
-				break;
-			case fnmadds_op:
-				func.t = fpemu_fnmadds;
-				ftype = S2S;
-				break;
-			case fnmsubs_op:
-				func.t = fpemu_fnmsubs;
-				ftype = S2S;
-				break;
-			case fmuls_op:
-				func.t = fmuls;
-				ftype = S2S;
-				break;
-			case fdivs_op:
-				func.t = fdivs;
-				ftype = S2S;
-				break;
-			case fs1_f2op_op:
-				switch (NDS32Insn_OPCODE_BIT1014(insn)) {
-				case fs2d_op:
-					func.b = fs2d;
-					ftype = S1D;
-					break;
-				case fs2si_op:
-					func.b = fs2si;
-					ftype = S1S;
-					break;
-				case fs2si_z_op:
-					func.b = fs2si_z;
-					ftype = S1S;
-					break;
-				case fs2ui_op:
-					func.b = fs2ui;
-					ftype = S1S;
-					break;
-				case fs2ui_z_op:
-					func.b = fs2ui_z;
-					ftype = S1S;
-					break;
-				case fsi2s_op:
-					func.b = fsi2s;
-					ftype = S1S;
-					break;
-				case fui2s_op:
-					func.b = fui2s;
-					ftype = S1S;
-					break;
-				case fsqrts_op:
-					func.b = fsqrts;
-					ftype = S1S;
-					break;
-				default:
-					return SIGILL;
-				}
-				break;
-			default:
-				return SIGILL;
-			}
-			break;
-		}
-	case fs2_op:
-		switch (NDS32Insn_OPCODE_BIT69(insn)) {
-		case fcmpeqs_op:
-		case fcmpeqs_e_op:
-		case fcmplts_op:
-		case fcmplts_e_op:
-		case fcmples_op:
-		case fcmples_e_op:
-		case fcmpuns_op:
-		case fcmpuns_e_op:
-			ftype = CS;
-			break;
-		default:
-			return SIGILL;
-		}
-		break;
-	case fd1_op:{
-			switch (NDS32Insn_OPCODE_BIT69(insn)) {
-			case faddd_op:
-				func.t = faddd;
-				ftype = D2D;
-				break;
-			case fsubd_op:
-				func.t = fsubd;
-				ftype = D2D;
-				break;
-			case fmaddd_op:
-				func.t = fpemu_fmaddd;
-				ftype = D2D;
-				break;
-			case fmsubd_op:
-				func.t = fpemu_fmsubd;
-				ftype = D2D;
-				break;
-			case fnmaddd_op:
-				func.t = fpemu_fnmaddd;
-				ftype = D2D;
-				break;
-			case fnmsubd_op:
-				func.t = fpemu_fnmsubd;
-				ftype = D2D;
-				break;
-			case fmuld_op:
-				func.t = fmuld;
-				ftype = D2D;
-				break;
-			case fdivd_op:
-				func.t = fdivd;
-				ftype = D2D;
-				break;
-			case fd1_f2op_op:
-				switch (NDS32Insn_OPCODE_BIT1014(insn)) {
-				case fd2s_op:
-					func.b = fd2s;
-					ftype = D1S;
-					break;
-				case fd2si_op:
-					func.b = fd2si;
-					ftype = D1S;
-					break;
-				case fd2si_z_op:
-					func.b = fd2si_z;
-					ftype = D1S;
-					break;
-				case fd2ui_op:
-					func.b = fd2ui;
-					ftype = D1S;
-					break;
-				case fd2ui_z_op:
-					func.b = fd2ui_z;
-					ftype = D1S;
-					break;
-				case fsi2d_op:
-					func.b = fsi2d;
-					ftype = D1S;
-					break;
-				case fui2d_op:
-					func.b = fui2d;
-					ftype = D1S;
-					break;
-				case fsqrtd_op:
-					func.b = fsqrtd;
-					ftype = D1D;
-					break;
-				default:
-					return SIGILL;
-				}
-				break;
-			default:
-				return SIGILL;
-
-			}
-			break;
-		}
-
-	case fd2_op:
-		switch (NDS32Insn_OPCODE_BIT69(insn)) {
-		case fcmpeqd_op:
-		case fcmpeqd_e_op:
-		case fcmpltd_op:
-		case fcmpltd_e_op:
-		case fcmpled_op:
-		case fcmpled_e_op:
-		case fcmpund_op:
-		case fcmpund_e_op:
-			ftype = CD;
-			break;
-		default:
-			return SIGILL;
-		}
-		break;
-
-	default:
-		return SIGILL;
-	}
-
-	switch (ftype) {
-	case S1S:{
-			void *ft, *fa;
-
-			SPFROMREG(ft, NDS32Insn_OPCODE_Rt(insn));
-			SPFROMREG(fa, NDS32Insn_OPCODE_Ra(insn));
-			func.b(ft, fa);
-			break;
-		}
-	case S2S:{
-			void *ft, *fa, *fb;
-
-			SPFROMREG(ft, NDS32Insn_OPCODE_Rt(insn));
-			SPFROMREG(fa, NDS32Insn_OPCODE_Ra(insn));
-			SPFROMREG(fb, NDS32Insn_OPCODE_Rb(insn));
-			func.t(ft, fa, fb);
-			break;
-		}
-	case S1D:{
-			void *ft, *fa;
-
-			DPFROMREG(ft, NDS32Insn_OPCODE_Rt(insn));
-			SPFROMREG(fa, NDS32Insn_OPCODE_Ra(insn));
-			func.b(ft, fa);
-			break;
-		}
-	case CS:{
-			unsigned int cmpop = NDS32Insn_OPCODE_BIT69(insn);
-			void *ft, *fa, *fb;
-
-			SPFROMREG(ft, NDS32Insn_OPCODE_Rt(insn));
-			SPFROMREG(fa, NDS32Insn_OPCODE_Ra(insn));
-			SPFROMREG(fb, NDS32Insn_OPCODE_Rb(insn));
-			if (cmpop < 0x8) {
-				cmpop = cmptab[cmpop];
-				fcmps(ft, fa, fb, cmpop);
-			} else
-				return SIGILL;
-			break;
-		}
-	case D1D:{
-			void *ft, *fa;
-
-			DPFROMREG(ft, NDS32Insn_OPCODE_Rt(insn));
-			DPFROMREG(fa, NDS32Insn_OPCODE_Ra(insn));
-			func.b(ft, fa);
-			break;
-		}
-	case D2D:{
-			void *ft, *fa, *fb;
-
-			DPFROMREG(ft, NDS32Insn_OPCODE_Rt(insn));
-			DPFROMREG(fa, NDS32Insn_OPCODE_Ra(insn));
-			DPFROMREG(fb, NDS32Insn_OPCODE_Rb(insn));
-			func.t(ft, fa, fb);
-			break;
-		}
-	case D1S:{
-			void *ft, *fa;
-
-			SPFROMREG(ft, NDS32Insn_OPCODE_Rt(insn));
-			DPFROMREG(fa, NDS32Insn_OPCODE_Ra(insn));
-			func.b(ft, fa);
-			break;
-		}
-	case CD:{
-			unsigned int cmpop = NDS32Insn_OPCODE_BIT69(insn);
-			void *ft, *fa, *fb;
-
-			SPFROMREG(ft, NDS32Insn_OPCODE_Rt(insn));
-			DPFROMREG(fa, NDS32Insn_OPCODE_Ra(insn));
-			DPFROMREG(fb, NDS32Insn_OPCODE_Rb(insn));
-			if (cmpop < 0x8) {
-				cmpop = cmptab[cmpop];
-				fcmpd(ft, fa, fb, cmpop);
-			} else
-				return SIGILL;
-			break;
-		}
-	default:
-		return SIGILL;
-	}
-
-	/*
-	 * If an exception is required, generate a tidy SIGFPE exception.
-	 */
-#if IS_ENABLED(CONFIG_SUPPORT_DENORMAL_ARITHMETIC)
-	if (((fpu_reg->fpcsr << 5) & fpu_reg->fpcsr & FPCSR_mskALLE_NO_UDF_IEXE)
-	    || ((fpu_reg->fpcsr << 5) & (fpu_reg->UDF_IEX_trap))) {
-#else
-	if ((fpu_reg->fpcsr << 5) & fpu_reg->fpcsr & FPCSR_mskALLE) {
-#endif
-		return SIGFPE;
-	}
-	return 0;
-}
-
-int do_fpuemu(struct pt_regs *regs, struct fpu_struct *fpu)
-{
-	unsigned long insn = 0, addr = regs->ipc;
-	unsigned long emulpc, contpc;
-	unsigned char *pc = (void *)&insn;
-	char c;
-	int i = 0, ret;
-
-	for (i = 0; i < 4; i++) {
-		if (__get_user(c, (unsigned char *)addr++))
-			return SIGBUS;
-		*pc++ = c;
-	}
-
-	insn = be32_to_cpu(insn);
-
-	emulpc = regs->ipc;
-	contpc = regs->ipc + 4;
-
-	if (NDS32Insn_OPCODE(insn) != cop0_op)
-		return SIGILL;
-
-	switch (NDS32Insn_OPCODE_COP0(insn)) {
-	case fs1_op:
-	case fs2_op:
-	case fd1_op:
-	case fd2_op:
-		{
-			/* a real fpu computation instruction */
-			ret = fpu_emu(fpu, insn);
-			if (!ret)
-				regs->ipc = contpc;
-		}
-		break;
-
-	default:
-		return SIGILL;
-	}
-
-	return ret;
-}
diff --git a/arch/nds32/math-emu/fs2d.c b/arch/nds32/math-emu/fs2d.c
deleted file mode 100644
index 0e8db9035631..000000000000
--- a/arch/nds32/math-emu/fs2d.c
+++ /dev/null
@@ -1,23 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2018 Andes Technology Corporation
-
-#include <linux/uaccess.h>
-#include <asm/sfp-machine.h>
-#include <math-emu/double.h>
-#include <math-emu/single.h>
-#include <math-emu/soft-fp.h>
-
-void fs2d(void *ft, void *fa)
-{
-	FP_DECL_S(A);
-	FP_DECL_D(R);
-	FP_DECL_EX;
-
-	FP_UNPACK_SP(A, fa);
-
-	FP_CONV(D, S, 2, 1, R, A);
-
-	FP_PACK_DP(ft, R);
-
-	__FPU_FPCSR |= FP_CUR_EXCEPTIONS;
-}
diff --git a/arch/nds32/math-emu/fs2si.c b/arch/nds32/math-emu/fs2si.c
deleted file mode 100644
index b4931d60980e..000000000000
--- a/arch/nds32/math-emu/fs2si.c
+++ /dev/null
@@ -1,29 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2019 Andes Technology Corporation
-#include <linux/uaccess.h>
-
-#include <asm/sfp-machine.h>
-#include <math-emu/soft-fp.h>
-#include <math-emu/single.h>
-
-void fs2si(void *ft, void *fa)
-{
-	int r;
-
-	FP_DECL_S(A);
-	FP_DECL_EX;
-
-	FP_UNPACK_SP(A, fa);
-
-	if (A_c == FP_CLS_INF) {
-		*(int *)ft = (A_s == 0) ? 0x7fffffff : 0x80000000;
-		__FPU_FPCSR |= FP_EX_INVALID;
-	} else if (A_c == FP_CLS_NAN) {
-		*(int *)ft = 0xffffffff;
-		__FPU_FPCSR |= FP_EX_INVALID;
-	} else {
-		FP_TO_INT_ROUND_S(r, A, 32, 1);
-		__FPU_FPCSR |= FP_CUR_EXCEPTIONS;
-		*(int *)ft = r;
-	}
-}
diff --git a/arch/nds32/math-emu/fs2siz.c b/arch/nds32/math-emu/fs2siz.c
deleted file mode 100644
index 1c2b99ce3e38..000000000000
--- a/arch/nds32/math-emu/fs2siz.c
+++ /dev/null
@@ -1,29 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2019 Andes Technology Corporation
-#include <linux/uaccess.h>
-
-#include <asm/sfp-machine.h>
-#include <math-emu/soft-fp.h>
-#include <math-emu/single.h>
-
-void fs2si_z(void *ft, void *fa)
-{
-	int r;
-
-	FP_DECL_S(A);
-	FP_DECL_EX;
-
-	FP_UNPACK_SP(A, fa);
-
-	if (A_c == FP_CLS_INF) {
-		*(int *)ft = (A_s == 0) ? 0x7fffffff : 0x80000000;
-		__FPU_FPCSR |= FP_EX_INVALID;
-	} else if (A_c == FP_CLS_NAN) {
-		*(int *)ft = 0xffffffff;
-		__FPU_FPCSR |= FP_EX_INVALID;
-	} else {
-		FP_TO_INT_S(r, A, 32, 1);
-		__FPU_FPCSR |= FP_CUR_EXCEPTIONS;
-		*(int *)ft = r;
-	}
-}
diff --git a/arch/nds32/math-emu/fs2ui.c b/arch/nds32/math-emu/fs2ui.c
deleted file mode 100644
index c337f0384d06..000000000000
--- a/arch/nds32/math-emu/fs2ui.c
+++ /dev/null
@@ -1,29 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2019 Andes Technology Corporation
-#include <linux/uaccess.h>
-
-#include <asm/sfp-machine.h>
-#include <math-emu/soft-fp.h>
-#include <math-emu/single.h>
-
-void fs2ui(void *ft, void *fa)
-{
-	unsigned int r;
-
-	FP_DECL_S(A);
-	FP_DECL_EX;
-
-	FP_UNPACK_SP(A, fa);
-
-	if (A_c == FP_CLS_INF) {
-		*(unsigned int *)ft = (A_s == 0) ? 0xffffffff : 0x00000000;
-		__FPU_FPCSR |= FP_EX_INVALID;
-	} else if (A_c == FP_CLS_NAN) {
-		*(unsigned int *)ft = 0xffffffff;
-		__FPU_FPCSR |= FP_EX_INVALID;
-	} else {
-		FP_TO_INT_ROUND_S(r, A, 32, 0);
-		__FPU_FPCSR |= FP_CUR_EXCEPTIONS;
-		*(unsigned int *)ft = r;
-	}
-}
diff --git a/arch/nds32/math-emu/fs2uiz.c b/arch/nds32/math-emu/fs2uiz.c
deleted file mode 100644
index 22c5e4768044..000000000000
--- a/arch/nds32/math-emu/fs2uiz.c
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2019 Andes Technology Corporation
-#include <linux/uaccess.h>
-
-#include <asm/sfp-machine.h>
-#include <math-emu/soft-fp.h>
-#include <math-emu/single.h>
-
-void fs2ui_z(void *ft, void *fa)
-{
-	unsigned int r;
-
-	FP_DECL_S(A);
-	FP_DECL_EX;
-
-	FP_UNPACK_SP(A, fa);
-
-	if (A_c == FP_CLS_INF) {
-		*(unsigned int *)ft = (A_s == 0) ? 0xffffffff : 0x00000000;
-		__FPU_FPCSR |= FP_EX_INVALID;
-	} else if (A_c == FP_CLS_NAN) {
-		*(unsigned int *)ft = 0xffffffff;
-		__FPU_FPCSR |= FP_EX_INVALID;
-	} else {
-		FP_TO_INT_S(r, A, 32, 0);
-		__FPU_FPCSR |= FP_CUR_EXCEPTIONS;
-		*(unsigned int *)ft = r;
-	}
-
-}
diff --git a/arch/nds32/math-emu/fsi2d.c b/arch/nds32/math-emu/fsi2d.c
deleted file mode 100644
index 6b04cec0c5c5..000000000000
--- a/arch/nds32/math-emu/fsi2d.c
+++ /dev/null
@@ -1,22 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2019 Andes Technology Corporation
-#include <linux/uaccess.h>
-
-#include <asm/sfp-machine.h>
-#include <math-emu/soft-fp.h>
-#include <math-emu/double.h>
-
-void fsi2d(void *ft, void *fa)
-{
-	int a = *(int *)fa;
-
-	FP_DECL_D(R);
-	FP_DECL_EX;
-
-	FP_FROM_INT_D(R, a, 32, int);
-
-	FP_PACK_DP(ft, R);
-
-	__FPU_FPCSR |= FP_CUR_EXCEPTIONS;
-
-}
diff --git a/arch/nds32/math-emu/fsi2s.c b/arch/nds32/math-emu/fsi2s.c
deleted file mode 100644
index 689864a5df90..000000000000
--- a/arch/nds32/math-emu/fsi2s.c
+++ /dev/null
@@ -1,22 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2019 Andes Technology Corporation
-#include <linux/uaccess.h>
-
-#include <asm/sfp-machine.h>
-#include <math-emu/soft-fp.h>
-#include <math-emu/single.h>
-
-void fsi2s(void *ft, void *fa)
-{
-	int a = *(int *)fa;
-
-	FP_DECL_S(R);
-	FP_DECL_EX;
-
-	FP_FROM_INT_S(R, a, 32, int);
-
-	FP_PACK_SP(ft, R);
-
-	__FPU_FPCSR |= FP_CUR_EXCEPTIONS;
-
-}
diff --git a/arch/nds32/math-emu/fsqrtd.c b/arch/nds32/math-emu/fsqrtd.c
deleted file mode 100644
index c3a8dbd81d4e..000000000000
--- a/arch/nds32/math-emu/fsqrtd.c
+++ /dev/null
@@ -1,21 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2018 Andes Technology Corporation
-
-#include <linux/uaccess.h>
-#include <asm/sfp-machine.h>
-#include <math-emu/soft-fp.h>
-#include <math-emu/double.h>
-void fsqrtd(void *ft, void *fa)
-{
-	FP_DECL_D(A);
-	FP_DECL_D(R);
-	FP_DECL_EX;
-
-	FP_UNPACK_DP(A, fa);
-
-	FP_SQRT_D(R, A);
-
-	FP_PACK_DP(ft, R);
-
-	__FPU_FPCSR |= FP_CUR_EXCEPTIONS;
-}
diff --git a/arch/nds32/math-emu/fsqrts.c b/arch/nds32/math-emu/fsqrts.c
deleted file mode 100644
index 4c6f94b27328..000000000000
--- a/arch/nds32/math-emu/fsqrts.c
+++ /dev/null
@@ -1,21 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2018 Andes Technology Corporation
-
-#include <linux/uaccess.h>
-#include <asm/sfp-machine.h>
-#include <math-emu/soft-fp.h>
-#include <math-emu/single.h>
-void fsqrts(void *ft, void *fa)
-{
-	FP_DECL_S(A);
-	FP_DECL_S(R);
-	FP_DECL_EX;
-
-	FP_UNPACK_SP(A, fa);
-
-	FP_SQRT_S(R, A);
-
-	FP_PACK_SP(ft, R);
-
-	__FPU_FPCSR |= FP_CUR_EXCEPTIONS;
-}
diff --git a/arch/nds32/math-emu/fsubd.c b/arch/nds32/math-emu/fsubd.c
deleted file mode 100644
index 81b6a0d02a1f..000000000000
--- a/arch/nds32/math-emu/fsubd.c
+++ /dev/null
@@ -1,27 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2018 Andes Technology Corporation
-#include <linux/uaccess.h>
-
-#include <asm/sfp-machine.h>
-#include <math-emu/soft-fp.h>
-#include <math-emu/double.h>
-void fsubd(void *ft, void *fa, void *fb)
-{
-
-	FP_DECL_D(A);
-	FP_DECL_D(B);
-	FP_DECL_D(R);
-	FP_DECL_EX;
-
-	FP_UNPACK_DP(A, fa);
-	FP_UNPACK_DP(B, fb);
-
-	if (B_c != FP_CLS_NAN)
-		B_s ^= 1;
-
-	FP_ADD_D(R, A, B);
-
-	FP_PACK_DP(ft, R);
-
-	__FPU_FPCSR |= FP_CUR_EXCEPTIONS;
-}
diff --git a/arch/nds32/math-emu/fsubs.c b/arch/nds32/math-emu/fsubs.c
deleted file mode 100644
index 61ddd9708465..000000000000
--- a/arch/nds32/math-emu/fsubs.c
+++ /dev/null
@@ -1,27 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2018 Andes Technology Corporation
-#include <linux/uaccess.h>
-
-#include <asm/sfp-machine.h>
-#include <math-emu/soft-fp.h>
-#include <math-emu/single.h>
-void fsubs(void *ft, void *fa, void *fb)
-{
-
-	FP_DECL_S(A);
-	FP_DECL_S(B);
-	FP_DECL_S(R);
-	FP_DECL_EX;
-
-	FP_UNPACK_SP(A, fa);
-	FP_UNPACK_SP(B, fb);
-
-	if (B_c != FP_CLS_NAN)
-		B_s ^= 1;
-
-	FP_ADD_S(R, A, B);
-
-	FP_PACK_SP(ft, R);
-
-	__FPU_FPCSR |= FP_CUR_EXCEPTIONS;
-}
diff --git a/arch/nds32/math-emu/fui2d.c b/arch/nds32/math-emu/fui2d.c
deleted file mode 100644
index 9689d33a8d50..000000000000
--- a/arch/nds32/math-emu/fui2d.c
+++ /dev/null
@@ -1,22 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2019 Andes Technology Corporation
-#include <linux/uaccess.h>
-
-#include <asm/sfp-machine.h>
-#include <math-emu/soft-fp.h>
-#include <math-emu/double.h>
-
-void fui2d(void *ft, void *fa)
-{
-	unsigned int a = *(unsigned int *)fa;
-
-	FP_DECL_D(R);
-	FP_DECL_EX;
-
-	FP_FROM_INT_D(R, a, 32, int);
-
-	FP_PACK_DP(ft, R);
-
-	__FPU_FPCSR |= FP_CUR_EXCEPTIONS;
-
-}
diff --git a/arch/nds32/math-emu/fui2s.c b/arch/nds32/math-emu/fui2s.c
deleted file mode 100644
index f70f0762547d..000000000000
--- a/arch/nds32/math-emu/fui2s.c
+++ /dev/null
@@ -1,22 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2019 Andes Technology Corporation
-#include <linux/uaccess.h>
-
-#include <asm/sfp-machine.h>
-#include <math-emu/soft-fp.h>
-#include <math-emu/single.h>
-
-void fui2s(void *ft, void *fa)
-{
-	unsigned int a = *(unsigned int *)fa;
-
-	FP_DECL_S(R);
-	FP_DECL_EX;
-
-	FP_FROM_INT_S(R, a, 32, int);
-
-	FP_PACK_SP(ft, R);
-
-	__FPU_FPCSR |= FP_CUR_EXCEPTIONS;
-
-}
diff --git a/arch/nds32/mm/Makefile b/arch/nds32/mm/Makefile
deleted file mode 100644
index 14fb2e8eb036..000000000000
--- a/arch/nds32/mm/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-obj-y				:= extable.o tlb.o fault.o init.o mmap.o \
-                                   mm-nds32.o cacheflush.o proc.o
-
-obj-$(CONFIG_ALIGNMENT_TRAP)	+= alignment.o
-
-ifdef CONFIG_FUNCTION_TRACER
-CFLAGS_REMOVE_proc.o     = $(CC_FLAGS_FTRACE)
-endif
-CFLAGS_proc.o              += -fomit-frame-pointer
diff --git a/arch/nds32/mm/alignment.c b/arch/nds32/mm/alignment.c
deleted file mode 100644
index 1eb7ded6992b..000000000000
--- a/arch/nds32/mm/alignment.c
+++ /dev/null
@@ -1,578 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#include <linux/proc_fs.h>
-#include <linux/uaccess.h>
-#include <linux/sysctl.h>
-#include <asm/unaligned.h>
-
-#define DEBUG(enable, tagged, ...)				\
-	do{							\
-		if (enable) {					\
-			if (tagged)				\
-			pr_warn("[ %30s() ] ", __func__);	\
-			pr_warn(__VA_ARGS__);			\
-		}						\
-	} while (0)
-
-#define RT(inst)	(((inst) >> 20) & 0x1FUL)
-#define RA(inst)	(((inst) >> 15) & 0x1FUL)
-#define RB(inst)	(((inst) >> 10) & 0x1FUL)
-#define SV(inst)	(((inst) >> 8) & 0x3UL)
-#define IMM(inst)	(((inst) >> 0) & 0x7FFFUL)
-
-#define RA3(inst)	(((inst) >> 3) & 0x7UL)
-#define RT3(inst)	(((inst) >> 6) & 0x7UL)
-#define IMM3U(inst)	(((inst) >> 0) & 0x7UL)
-
-#define RA5(inst)	(((inst) >> 0) & 0x1FUL)
-#define RT4(inst)	(((inst) >> 5) & 0xFUL)
-
-#define GET_IMMSVAL(imm_value) \
-	(((imm_value >> 14) & 0x1) ? (imm_value - 0x8000) : imm_value)
-
-#define __get8_data(val,addr,err)	\
-	__asm__(					\
-	"1:	lbi.bi	%1, [%2], #1\n"			\
-	"2:\n"						\
-	"	.pushsection .text.fixup,\"ax\"\n"	\
-	"	.align	2\n"				\
-	"3:	movi	%0, #1\n"			\
-	"	j	2b\n"				\
-	"	.popsection\n"				\
-	"	.pushsection __ex_table,\"a\"\n"	\
-	"	.align	3\n"				\
-	"	.long	1b, 3b\n"			\
-	"	.popsection\n"				\
-	: "=r" (err), "=&r" (val), "=r" (addr)		\
-	: "0" (err), "2" (addr))
-
-#define get16_data(addr, val_ptr)				\
-	do {							\
-		unsigned int err = 0, v, a = addr;		\
-		__get8_data(v,a,err);				\
-		*val_ptr =  v << 0;				\
-		__get8_data(v,a,err);				\
-		*val_ptr |= v << 8;				\
-		if (err)					\
-			goto fault;				\
-		*val_ptr = le16_to_cpu(*val_ptr);		\
-	} while(0)
-
-#define get32_data(addr, val_ptr)				\
-	do {							\
-		unsigned int err = 0, v, a = addr;		\
-		__get8_data(v,a,err);				\
-		*val_ptr =  v << 0;				\
-		__get8_data(v,a,err);				\
-		*val_ptr |= v << 8;				\
-		__get8_data(v,a,err);				\
-		*val_ptr |= v << 16;				\
-		__get8_data(v,a,err);				\
-		*val_ptr |= v << 24;				\
-		if (err)					\
-			goto fault;				\
-		*val_ptr = le32_to_cpu(*val_ptr);		\
-	} while(0)
-
-#define get_data(addr, val_ptr, len)				\
-	if (len == 2)						\
-		get16_data(addr, val_ptr);			\
-	else							\
-		get32_data(addr, val_ptr);
-
-#define set16_data(addr, val)					\
-	do {							\
-		unsigned int err = 0, *ptr = addr ;		\
-		val = le32_to_cpu(val);				\
-		__asm__(					\
-                "1:	sbi.bi 	%2, [%1], #1\n"			\
-                "	srli 	%2, %2, #8\n"			\
-                "2:	sbi	%2, [%1]\n"			\
-		"3:\n"						\
-		"	.pushsection .text.fixup,\"ax\"\n"	\
-		"	.align	2\n"				\
-		"4:	movi	%0, #1\n"			\
-		"	j	3b\n"				\
-		"	.popsection\n"				\
-		"	.pushsection __ex_table,\"a\"\n"	\
-		"	.align	3\n"				\
-		"	.long	1b, 4b\n"			\
-		"	.long	2b, 4b\n"			\
-		"	.popsection\n"				\
-		: "=r" (err), "+r" (ptr), "+r" (val)		\
-		: "0" (err)					\
-		);						\
-		if (err)					\
-			goto fault;				\
-	} while(0)
-
-#define set32_data(addr, val)					\
-	do {							\
-		unsigned int err = 0, *ptr = addr ;		\
-		val = le32_to_cpu(val);				\
-		__asm__(					\
-                "1:	sbi.bi 	%2, [%1], #1\n"			\
-                "	srli 	%2, %2, #8\n"			\
-                "2:	sbi.bi 	%2, [%1], #1\n"			\
-                "	srli 	%2, %2, #8\n"			\
-                "3:	sbi.bi 	%2, [%1], #1\n"			\
-                "	srli 	%2, %2, #8\n"			\
-                "4:	sbi 	%2, [%1]\n"			\
-		"5:\n"						\
-		"	.pushsection .text.fixup,\"ax\"\n"	\
-		"	.align	2\n"				\
-		"6:	movi	%0, #1\n"			\
-		"	j	5b\n"				\
-		"	.popsection\n"				\
-		"	.pushsection __ex_table,\"a\"\n"	\
-		"	.align	3\n"				\
-		"	.long	1b, 6b\n"			\
-		"	.long	2b, 6b\n"			\
-		"	.long	3b, 6b\n"			\
-		"	.long	4b, 6b\n"			\
-		"	.popsection\n"				\
-		: "=r" (err), "+r" (ptr), "+r" (val)		\
-		: "0" (err)					\
-		);						\
-		if (err)					\
-			goto fault;				\
-	} while(0)
-#define set_data(addr, val, len)				\
-	if (len == 2)						\
-		set16_data(addr, val);				\
-	else							\
-		set32_data(addr, val);
-#define NDS32_16BIT_INSTRUCTION	0x80000000
-
-extern pte_t va_present(struct mm_struct *mm, unsigned long addr);
-extern pte_t va_kernel_present(unsigned long addr);
-extern int va_readable(struct pt_regs *regs, unsigned long addr);
-extern int va_writable(struct pt_regs *regs, unsigned long addr);
-
-int unalign_access_mode = 0, unalign_access_debug = 0;
-
-static inline unsigned long *idx_to_addr(struct pt_regs *regs, int idx)
-{
-	/* this should be consistent with ptrace.h */
-	if (idx >= 0 && idx <= 25)	/* R0-R25 */
-		return &regs->uregs[0] + idx;
-	else if (idx >= 28 && idx <= 30)	/* FP, GP, LP */
-		return &regs->fp + (idx - 28);
-	else if (idx == 31)	/* SP */
-		return &regs->sp;
-	else
-		return NULL;	/* cause a segfault */
-}
-
-static inline unsigned long get_inst(unsigned long addr)
-{
-	return be32_to_cpu(get_unaligned((u32 *) addr));
-}
-
-static inline unsigned long sign_extend(unsigned long val, int len)
-{
-	unsigned long ret = 0;
-	unsigned char *s, *t;
-	int i = 0;
-
-	val = cpu_to_le32(val);
-
-	s = (void *)&val;
-	t = (void *)&ret;
-
-	while (i++ < len)
-		*t++ = *s++;
-
-	if (((*(t - 1)) & 0x80) && (i < 4)) {
-
-		while (i++ <= 4)
-			*t++ = 0xff;
-	}
-
-	return le32_to_cpu(ret);
-}
-
-static inline int do_16(unsigned long inst, struct pt_regs *regs)
-{
-	int imm, regular, load, len, addr_mode, idx_mode;
-	unsigned long unaligned_addr, target_val, source_idx, target_idx,
-	    shift = 0;
-	switch ((inst >> 9) & 0x3F) {
-
-	case 0x12:		/* LHI333    */
-		imm = 1;
-		regular = 1;
-		load = 1;
-		len = 2;
-		addr_mode = 3;
-		idx_mode = 3;
-		break;
-	case 0x10:		/* LWI333    */
-		imm = 1;
-		regular = 1;
-		load = 1;
-		len = 4;
-		addr_mode = 3;
-		idx_mode = 3;
-		break;
-	case 0x11:		/* LWI333.bi */
-		imm = 1;
-		regular = 0;
-		load = 1;
-		len = 4;
-		addr_mode = 3;
-		idx_mode = 3;
-		break;
-	case 0x1A:		/* LWI450    */
-		imm = 0;
-		regular = 1;
-		load = 1;
-		len = 4;
-		addr_mode = 5;
-		idx_mode = 4;
-		break;
-	case 0x16:		/* SHI333    */
-		imm = 1;
-		regular = 1;
-		load = 0;
-		len = 2;
-		addr_mode = 3;
-		idx_mode = 3;
-		break;
-	case 0x14:		/* SWI333    */
-		imm = 1;
-		regular = 1;
-		load = 0;
-		len = 4;
-		addr_mode = 3;
-		idx_mode = 3;
-		break;
-	case 0x15:		/* SWI333.bi */
-		imm = 1;
-		regular = 0;
-		load = 0;
-		len = 4;
-		addr_mode = 3;
-		idx_mode = 3;
-		break;
-	case 0x1B:		/* SWI450    */
-		imm = 0;
-		regular = 1;
-		load = 0;
-		len = 4;
-		addr_mode = 5;
-		idx_mode = 4;
-		break;
-
-	default:
-		return -EFAULT;
-	}
-
-	if (addr_mode == 3) {
-		unaligned_addr = *idx_to_addr(regs, RA3(inst));
-		source_idx = RA3(inst);
-	} else {
-		unaligned_addr = *idx_to_addr(regs, RA5(inst));
-		source_idx = RA5(inst);
-	}
-
-	if (idx_mode == 3)
-		target_idx = RT3(inst);
-	else
-		target_idx = RT4(inst);
-
-	if (imm)
-		shift = IMM3U(inst) * len;
-
-	if (regular)
-		unaligned_addr += shift;
-
-	if (load) {
-		if (!access_ok((void *)unaligned_addr, len))
-			return -EACCES;
-
-		get_data(unaligned_addr, &target_val, len);
-		*idx_to_addr(regs, target_idx) = target_val;
-	} else {
-		if (!access_ok((void *)unaligned_addr, len))
-			return -EACCES;
-		target_val = *idx_to_addr(regs, target_idx);
-		set_data((void *)unaligned_addr, target_val, len);
-	}
-
-	if (!regular)
-		*idx_to_addr(regs, source_idx) = unaligned_addr + shift;
-	regs->ipc += 2;
-
-	return 0;
-fault:
-	return -EACCES;
-}
-
-static inline int do_32(unsigned long inst, struct pt_regs *regs)
-{
-	int imm, regular, load, len, sign_ext;
-	unsigned long unaligned_addr, target_val, shift;
-
-	unaligned_addr = *idx_to_addr(regs, RA(inst));
-
-	switch ((inst >> 25) << 1) {
-
-	case 0x02:		/* LHI       */
-		imm = 1;
-		regular = 1;
-		load = 1;
-		len = 2;
-		sign_ext = 0;
-		break;
-	case 0x0A:		/* LHI.bi    */
-		imm = 1;
-		regular = 0;
-		load = 1;
-		len = 2;
-		sign_ext = 0;
-		break;
-	case 0x22:		/* LHSI      */
-		imm = 1;
-		regular = 1;
-		load = 1;
-		len = 2;
-		sign_ext = 1;
-		break;
-	case 0x2A:		/* LHSI.bi   */
-		imm = 1;
-		regular = 0;
-		load = 1;
-		len = 2;
-		sign_ext = 1;
-		break;
-	case 0x04:		/* LWI       */
-		imm = 1;
-		regular = 1;
-		load = 1;
-		len = 4;
-		sign_ext = 0;
-		break;
-	case 0x0C:		/* LWI.bi    */
-		imm = 1;
-		regular = 0;
-		load = 1;
-		len = 4;
-		sign_ext = 0;
-		break;
-	case 0x12:		/* SHI       */
-		imm = 1;
-		regular = 1;
-		load = 0;
-		len = 2;
-		sign_ext = 0;
-		break;
-	case 0x1A:		/* SHI.bi    */
-		imm = 1;
-		regular = 0;
-		load = 0;
-		len = 2;
-		sign_ext = 0;
-		break;
-	case 0x14:		/* SWI       */
-		imm = 1;
-		regular = 1;
-		load = 0;
-		len = 4;
-		sign_ext = 0;
-		break;
-	case 0x1C:		/* SWI.bi    */
-		imm = 1;
-		regular = 0;
-		load = 0;
-		len = 4;
-		sign_ext = 0;
-		break;
-
-	default:
-		switch (inst & 0xff) {
-
-		case 0x01:	/* LH        */
-			imm = 0;
-			regular = 1;
-			load = 1;
-			len = 2;
-			sign_ext = 0;
-			break;
-		case 0x05:	/* LH.bi     */
-			imm = 0;
-			regular = 0;
-			load = 1;
-			len = 2;
-			sign_ext = 0;
-			break;
-		case 0x11:	/* LHS       */
-			imm = 0;
-			regular = 1;
-			load = 1;
-			len = 2;
-			sign_ext = 1;
-			break;
-		case 0x15:	/* LHS.bi    */
-			imm = 0;
-			regular = 0;
-			load = 1;
-			len = 2;
-			sign_ext = 1;
-			break;
-		case 0x02:	/* LW        */
-			imm = 0;
-			regular = 1;
-			load = 1;
-			len = 4;
-			sign_ext = 0;
-			break;
-		case 0x06:	/* LW.bi     */
-			imm = 0;
-			regular = 0;
-			load = 1;
-			len = 4;
-			sign_ext = 0;
-			break;
-		case 0x09:	/* SH        */
-			imm = 0;
-			regular = 1;
-			load = 0;
-			len = 2;
-			sign_ext = 0;
-			break;
-		case 0x0D:	/* SH.bi     */
-			imm = 0;
-			regular = 0;
-			load = 0;
-			len = 2;
-			sign_ext = 0;
-			break;
-		case 0x0A:	/* SW        */
-			imm = 0;
-			regular = 1;
-			load = 0;
-			len = 4;
-			sign_ext = 0;
-			break;
-		case 0x0E:	/* SW.bi     */
-			imm = 0;
-			regular = 0;
-			load = 0;
-			len = 4;
-			sign_ext = 0;
-			break;
-
-		default:
-			return -EFAULT;
-		}
-	}
-
-	if (imm)
-		shift = GET_IMMSVAL(IMM(inst)) * len;
-	else
-		shift = *idx_to_addr(regs, RB(inst)) << SV(inst);
-
-	if (regular)
-		unaligned_addr += shift;
-
-	if (load) {
-
-		if (!access_ok((void *)unaligned_addr, len))
-			return -EACCES;
-
-		get_data(unaligned_addr, &target_val, len);
-
-		if (sign_ext)
-			*idx_to_addr(regs, RT(inst)) =
-			    sign_extend(target_val, len);
-		else
-			*idx_to_addr(regs, RT(inst)) = target_val;
-	} else {
-
-		if (!access_ok((void *)unaligned_addr, len))
-			return -EACCES;
-
-		target_val = *idx_to_addr(regs, RT(inst));
-		set_data((void *)unaligned_addr, target_val, len);
-	}
-
-	if (!regular)
-		*idx_to_addr(regs, RA(inst)) = unaligned_addr + shift;
-
-	regs->ipc += 4;
-
-	return 0;
-fault:
-	return -EACCES;
-}
-
-int do_unaligned_access(unsigned long addr, struct pt_regs *regs)
-{
-	unsigned long inst;
-	int ret = -EFAULT;
-	mm_segment_t seg;
-
-	inst = get_inst(regs->ipc);
-
-	DEBUG((unalign_access_debug > 0), 1,
-	      "Faulting addr: 0x%08lx, pc: 0x%08lx [inst: 0x%08lx ]\n", addr,
-	      regs->ipc, inst);
-
-	seg = force_uaccess_begin();
-	if (inst & NDS32_16BIT_INSTRUCTION)
-		ret = do_16((inst >> 16) & 0xffff, regs);
-	else
-		ret = do_32(inst, regs);
-	force_uaccess_end(seg);
-
-	return ret;
-}
-
-#ifdef CONFIG_PROC_FS
-
-static struct ctl_table alignment_tbl[3] = {
-	{
-	 .procname = "enable",
-	 .data = &unalign_access_mode,
-	 .maxlen = sizeof(unalign_access_mode),
-	 .mode = 0666,
-	 .proc_handler = &proc_dointvec
-	}
-	,
-	{
-	 .procname = "debug_info",
-	 .data = &unalign_access_debug,
-	 .maxlen = sizeof(unalign_access_debug),
-	 .mode = 0644,
-	 .proc_handler = &proc_dointvec
-	}
-	,
-	{}
-};
-
-static struct ctl_table nds32_sysctl_table[2] = {
-	{
-	 .procname = "unaligned_access",
-	 .mode = 0555,
-	 .child = alignment_tbl},
-	{}
-};
-
-static struct ctl_path nds32_path[2] = {
-	{.procname = "nds32"},
-	{}
-};
-
-/*
- * Initialize nds32 alignment-correction interface
- */
-static int __init nds32_sysctl_init(void)
-{
-	register_sysctl_paths(nds32_path, nds32_sysctl_table);
-	return 0;
-}
-
-__initcall(nds32_sysctl_init);
-#endif /* CONFIG_PROC_FS */
diff --git a/arch/nds32/mm/cacheflush.c b/arch/nds32/mm/cacheflush.c
deleted file mode 100644
index 07aac65d1cab..000000000000
--- a/arch/nds32/mm/cacheflush.c
+++ /dev/null
@@ -1,338 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/fs.h>
-#include <linux/pagemap.h>
-#include <linux/module.h>
-#include <asm/cacheflush.h>
-#include <asm/proc-fns.h>
-#include <asm/shmparam.h>
-#include <asm/cache_info.h>
-
-extern struct cache_info L1_cache_info[2];
-
-void flush_icache_range(unsigned long start, unsigned long end)
-{
-	unsigned long line_size, flags;
-	line_size = L1_cache_info[DCACHE].line_size;
-	start = start & ~(line_size - 1);
-	end = (end + line_size - 1) & ~(line_size - 1);
-	local_irq_save(flags);
-	cpu_cache_wbinval_range(start, end, 1);
-	local_irq_restore(flags);
-}
-EXPORT_SYMBOL(flush_icache_range);
-
-void flush_icache_page(struct vm_area_struct *vma, struct page *page)
-{
-	unsigned long flags;
-	unsigned long kaddr;
-	local_irq_save(flags);
-	kaddr = (unsigned long)kmap_atomic(page);
-	cpu_cache_wbinval_page(kaddr, vma->vm_flags & VM_EXEC);
-	kunmap_atomic((void *)kaddr);
-	local_irq_restore(flags);
-}
-
-void flush_icache_user_page(struct vm_area_struct *vma, struct page *page,
-	                     unsigned long addr, int len)
-{
-	unsigned long kaddr;
-	kaddr = (unsigned long)kmap_atomic(page) + (addr & ~PAGE_MASK);
-	flush_icache_range(kaddr, kaddr + len);
-	kunmap_atomic((void *)kaddr);
-}
-
-void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr,
-		      pte_t * pte)
-{
-	struct page *page;
-	unsigned long pfn = pte_pfn(*pte);
-	unsigned long flags;
-
-	if (!pfn_valid(pfn))
-		return;
-
-	if (vma->vm_mm == current->active_mm) {
-		local_irq_save(flags);
-		__nds32__mtsr_dsb(addr, NDS32_SR_TLB_VPN);
-		__nds32__tlbop_rwr(*pte);
-		__nds32__isb();
-		local_irq_restore(flags);
-	}
-	page = pfn_to_page(pfn);
-
-	if ((test_and_clear_bit(PG_dcache_dirty, &page->flags)) ||
-	    (vma->vm_flags & VM_EXEC)) {
-		unsigned long kaddr;
-		local_irq_save(flags);
-		kaddr = (unsigned long)kmap_atomic(page);
-		cpu_cache_wbinval_page(kaddr, vma->vm_flags & VM_EXEC);
-		kunmap_atomic((void *)kaddr);
-		local_irq_restore(flags);
-	}
-}
-#ifdef CONFIG_CPU_CACHE_ALIASING
-extern pte_t va_present(struct mm_struct *mm, unsigned long addr);
-
-static inline unsigned long aliasing(unsigned long addr, unsigned long page)
-{
-	return ((addr & PAGE_MASK) ^ page) & (SHMLBA - 1);
-}
-
-static inline unsigned long kremap0(unsigned long uaddr, unsigned long pa)
-{
-	unsigned long kaddr, pte;
-
-#define BASE_ADDR0 0xffffc000
-	kaddr = BASE_ADDR0 | (uaddr & L1_cache_info[DCACHE].aliasing_mask);
-	pte = (pa | PAGE_KERNEL);
-	__nds32__mtsr_dsb(kaddr, NDS32_SR_TLB_VPN);
-	__nds32__tlbop_rwlk(pte);
-	__nds32__isb();
-	return kaddr;
-}
-
-static inline void kunmap01(unsigned long kaddr)
-{
-	__nds32__tlbop_unlk(kaddr);
-	__nds32__tlbop_inv(kaddr);
-	__nds32__isb();
-}
-
-static inline unsigned long kremap1(unsigned long uaddr, unsigned long pa)
-{
-	unsigned long kaddr, pte;
-
-#define BASE_ADDR1 0xffff8000
-	kaddr = BASE_ADDR1 | (uaddr & L1_cache_info[DCACHE].aliasing_mask);
-	pte = (pa | PAGE_KERNEL);
-	__nds32__mtsr_dsb(kaddr, NDS32_SR_TLB_VPN);
-	__nds32__tlbop_rwlk(pte);
-	__nds32__isb();
-	return kaddr;
-}
-
-void flush_cache_mm(struct mm_struct *mm)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	cpu_dcache_wbinval_all();
-	cpu_icache_inval_all();
-	local_irq_restore(flags);
-}
-
-void flush_cache_dup_mm(struct mm_struct *mm)
-{
-}
-
-void flush_cache_range(struct vm_area_struct *vma,
-		       unsigned long start, unsigned long end)
-{
-	unsigned long flags;
-
-	if ((end - start) > 8 * PAGE_SIZE) {
-		cpu_dcache_wbinval_all();
-		if (vma->vm_flags & VM_EXEC)
-			cpu_icache_inval_all();
-		return;
-	}
-	local_irq_save(flags);
-	while (start < end) {
-		if (va_present(vma->vm_mm, start))
-			cpu_cache_wbinval_page(start, vma->vm_flags & VM_EXEC);
-		start += PAGE_SIZE;
-	}
-	local_irq_restore(flags);
-	return;
-}
-
-void flush_cache_page(struct vm_area_struct *vma,
-		      unsigned long addr, unsigned long pfn)
-{
-	unsigned long vto, flags;
-
-	local_irq_save(flags);
-	vto = kremap0(addr, pfn << PAGE_SHIFT);
-	cpu_cache_wbinval_page(vto, vma->vm_flags & VM_EXEC);
-	kunmap01(vto);
-	local_irq_restore(flags);
-}
-
-void flush_cache_vmap(unsigned long start, unsigned long end)
-{
-	cpu_dcache_wbinval_all();
-	cpu_icache_inval_all();
-}
-
-void flush_cache_vunmap(unsigned long start, unsigned long end)
-{
-	cpu_dcache_wbinval_all();
-	cpu_icache_inval_all();
-}
-
-void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
-		    struct page *to)
-{
-	cpu_dcache_wbinval_page((unsigned long)vaddr);
-	cpu_icache_inval_page((unsigned long)vaddr);
-	copy_page(vto, vfrom);
-	cpu_dcache_wbinval_page((unsigned long)vto);
-	cpu_icache_inval_page((unsigned long)vto);
-}
-
-void clear_user_page(void *addr, unsigned long vaddr, struct page *page)
-{
-	cpu_dcache_wbinval_page((unsigned long)vaddr);
-	cpu_icache_inval_page((unsigned long)vaddr);
-	clear_page(addr);
-	cpu_dcache_wbinval_page((unsigned long)addr);
-	cpu_icache_inval_page((unsigned long)addr);
-}
-
-void copy_user_highpage(struct page *to, struct page *from,
-			unsigned long vaddr, struct vm_area_struct *vma)
-{
-	unsigned long vto, vfrom, flags, kto, kfrom, pfrom, pto;
-	kto = ((unsigned long)page_address(to) & PAGE_MASK);
-	kfrom = ((unsigned long)page_address(from) & PAGE_MASK);
-	pto = page_to_phys(to);
-	pfrom = page_to_phys(from);
-
-	local_irq_save(flags);
-	if (aliasing(vaddr, (unsigned long)kfrom))
-		cpu_dcache_wb_page((unsigned long)kfrom);
-	vto = kremap0(vaddr, pto);
-	vfrom = kremap1(vaddr, pfrom);
-	copy_page((void *)vto, (void *)vfrom);
-	kunmap01(vfrom);
-	kunmap01(vto);
-	local_irq_restore(flags);
-}
-
-EXPORT_SYMBOL(copy_user_highpage);
-
-void clear_user_highpage(struct page *page, unsigned long vaddr)
-{
-	unsigned long vto, flags, kto;
-
-	kto = ((unsigned long)page_address(page) & PAGE_MASK);
-
-	local_irq_save(flags);
-	if (aliasing(kto, vaddr) && kto != 0) {
-		cpu_dcache_inval_page(kto);
-		cpu_icache_inval_page(kto);
-	}
-	vto = kremap0(vaddr, page_to_phys(page));
-	clear_page((void *)vto);
-	kunmap01(vto);
-	local_irq_restore(flags);
-}
-
-EXPORT_SYMBOL(clear_user_highpage);
-
-void flush_dcache_page(struct page *page)
-{
-	struct address_space *mapping;
-
-	mapping = page_mapping_file(page);
-	if (mapping && !mapping_mapped(mapping))
-		set_bit(PG_dcache_dirty, &page->flags);
-	else {
-		unsigned long kaddr, flags;
-
-		kaddr = (unsigned long)page_address(page);
-		local_irq_save(flags);
-		cpu_dcache_wbinval_page(kaddr);
-		if (mapping) {
-			unsigned long vaddr, kto;
-
-			vaddr = page->index << PAGE_SHIFT;
-			if (aliasing(vaddr, kaddr)) {
-				kto = kremap0(vaddr, page_to_phys(page));
-				cpu_dcache_wbinval_page(kto);
-				kunmap01(kto);
-			}
-		}
-		local_irq_restore(flags);
-	}
-}
-EXPORT_SYMBOL(flush_dcache_page);
-
-void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
-		       unsigned long vaddr, void *dst, void *src, int len)
-{
-	unsigned long line_size, start, end, vto, flags;
-
-	local_irq_save(flags);
-	vto = kremap0(vaddr, page_to_phys(page));
-	dst = (void *)(vto | (vaddr & (PAGE_SIZE - 1)));
-	memcpy(dst, src, len);
-	if (vma->vm_flags & VM_EXEC) {
-		line_size = L1_cache_info[DCACHE].line_size;
-		start = (unsigned long)dst & ~(line_size - 1);
-		end =
-		    ((unsigned long)dst + len + line_size - 1) & ~(line_size -
-								   1);
-		cpu_cache_wbinval_range(start, end, 1);
-	}
-	kunmap01(vto);
-	local_irq_restore(flags);
-}
-
-void copy_from_user_page(struct vm_area_struct *vma, struct page *page,
-			 unsigned long vaddr, void *dst, void *src, int len)
-{
-	unsigned long vto, flags;
-
-	local_irq_save(flags);
-	vto = kremap0(vaddr, page_to_phys(page));
-	src = (void *)(vto | (vaddr & (PAGE_SIZE - 1)));
-	memcpy(dst, src, len);
-	kunmap01(vto);
-	local_irq_restore(flags);
-}
-
-void flush_anon_page(struct vm_area_struct *vma,
-		     struct page *page, unsigned long vaddr)
-{
-	unsigned long kaddr, flags, ktmp;
-	if (!PageAnon(page))
-		return;
-
-	if (vma->vm_mm != current->active_mm)
-		return;
-
-	local_irq_save(flags);
-	if (vma->vm_flags & VM_EXEC)
-		cpu_icache_inval_page(vaddr & PAGE_MASK);
-	kaddr = (unsigned long)page_address(page);
-	if (aliasing(vaddr, kaddr)) {
-		ktmp = kremap0(vaddr, page_to_phys(page));
-		cpu_dcache_wbinval_page(ktmp);
-		kunmap01(ktmp);
-	}
-	local_irq_restore(flags);
-}
-
-void flush_kernel_vmap_range(void *addr, int size)
-{
-	unsigned long flags;
-	local_irq_save(flags);
-	cpu_dcache_wb_range((unsigned long)addr, (unsigned long)addr +  size);
-	local_irq_restore(flags);
-}
-EXPORT_SYMBOL(flush_kernel_vmap_range);
-
-void invalidate_kernel_vmap_range(void *addr, int size)
-{
-	unsigned long flags;
-	local_irq_save(flags);
-	cpu_dcache_inval_range((unsigned long)addr, (unsigned long)addr + size);
-	local_irq_restore(flags);
-}
-EXPORT_SYMBOL(invalidate_kernel_vmap_range);
-#endif
diff --git a/arch/nds32/mm/extable.c b/arch/nds32/mm/extable.c
deleted file mode 100644
index db7f0a7c8966..000000000000
--- a/arch/nds32/mm/extable.c
+++ /dev/null
@@ -1,16 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#include <linux/extable.h>
-#include <linux/uaccess.h>
-
-int fixup_exception(struct pt_regs *regs)
-{
-	const struct exception_table_entry *fixup;
-
-	fixup = search_exception_tables(instruction_pointer(regs));
-	if (fixup)
-		regs->ipc = fixup->fixup;
-
-	return fixup != NULL;
-}
diff --git a/arch/nds32/mm/fault.c b/arch/nds32/mm/fault.c
deleted file mode 100644
index 636977a1c8b9..000000000000
--- a/arch/nds32/mm/fault.c
+++ /dev/null
@@ -1,396 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#include <linux/extable.h>
-#include <linux/module.h>
-#include <linux/signal.h>
-#include <linux/ptrace.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/hardirq.h>
-#include <linux/uaccess.h>
-#include <linux/perf_event.h>
-
-#include <asm/tlbflush.h>
-
-extern void __noreturn die(const char *str, struct pt_regs *regs, long err);
-
-/*
- * This is useful to dump out the page tables associated with
- * 'addr' in mm 'mm'.
- */
-void show_pte(struct mm_struct *mm, unsigned long addr)
-{
-	pgd_t *pgd;
-	if (!mm)
-		mm = &init_mm;
-
-	pr_alert("pgd = %p\n", mm->pgd);
-	pgd = pgd_offset(mm, addr);
-	pr_alert("[%08lx] *pgd=%08lx", addr, pgd_val(*pgd));
-
-	do {
-		p4d_t *p4d;
-		pud_t *pud;
-		pmd_t *pmd;
-
-		if (pgd_none(*pgd))
-			break;
-
-		if (pgd_bad(*pgd)) {
-			pr_alert("(bad)");
-			break;
-		}
-
-		p4d = p4d_offset(pgd, addr);
-		pud = pud_offset(p4d, addr);
-		pmd = pmd_offset(pud, addr);
-#if PTRS_PER_PMD != 1
-		pr_alert(", *pmd=%08lx", pmd_val(*pmd));
-#endif
-
-		if (pmd_none(*pmd))
-			break;
-
-		if (pmd_bad(*pmd)) {
-			pr_alert("(bad)");
-			break;
-		}
-
-		if (IS_ENABLED(CONFIG_HIGHMEM))
-		{
-			pte_t *pte;
-			/* We must not map this if we have highmem enabled */
-			pte = pte_offset_map(pmd, addr);
-			pr_alert(", *pte=%08lx", pte_val(*pte));
-			pte_unmap(pte);
-		}
-	} while (0);
-
-	pr_alert("\n");
-}
-
-void do_page_fault(unsigned long entry, unsigned long addr,
-		   unsigned int error_code, struct pt_regs *regs)
-{
-	struct task_struct *tsk;
-	struct mm_struct *mm;
-	struct vm_area_struct *vma;
-	int si_code;
-	vm_fault_t fault;
-	unsigned int mask = VM_ACCESS_FLAGS;
-	unsigned int flags = FAULT_FLAG_DEFAULT;
-
-	error_code = error_code & (ITYPE_mskINST | ITYPE_mskETYPE);
-	tsk = current;
-	mm = tsk->mm;
-	si_code = SEGV_MAPERR;
-	/*
-	 * We fault-in kernel-space virtual memory on-demand. The
-	 * 'reference' page table is init_mm.pgd.
-	 *
-	 * NOTE! We MUST NOT take any locks for this case. We may
-	 * be in an interrupt or a critical region, and should
-	 * only copy the information from the master page table,
-	 * nothing more.
-	 */
-	if (addr >= TASK_SIZE) {
-		if (user_mode(regs))
-			goto bad_area_nosemaphore;
-
-		if (addr >= TASK_SIZE && addr < VMALLOC_END
-		    && (entry == ENTRY_PTE_NOT_PRESENT))
-			goto vmalloc_fault;
-		else
-			goto no_context;
-	}
-
-	/* Send a signal to the task for handling the unalignment access. */
-	if (entry == ENTRY_GENERAL_EXCPETION
-	    && error_code == ETYPE_ALIGNMENT_CHECK) {
-		if (user_mode(regs))
-			goto bad_area_nosemaphore;
-		else
-			goto no_context;
-	}
-
-	/*
-	 * If we're in an interrupt or have no user
-	 * context, we must not take the fault..
-	 */
-	if (unlikely(faulthandler_disabled() || !mm))
-		goto no_context;
-
-	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, addr);
-
-	/*
-	 * As per x86, we may deadlock here. However, since the kernel only
-	 * validly references user space from well defined areas of the code,
-	 * we can bug out early if this is from code which shouldn't.
-	 */
-	if (unlikely(!mmap_read_trylock(mm))) {
-		if (!user_mode(regs) &&
-		    !search_exception_tables(instruction_pointer(regs)))
-			goto no_context;
-retry:
-		mmap_read_lock(mm);
-	} else {
-		/*
-		 * The above down_read_trylock() might have succeeded in which
-		 * case, we'll have missed the might_sleep() from down_read().
-		 */
-		might_sleep();
-		if (IS_ENABLED(CONFIG_DEBUG_VM)) {
-			if (!user_mode(regs) &&
-			    !search_exception_tables(instruction_pointer(regs)))
-				goto no_context;
-		}
-	}
-
-	vma = find_vma(mm, addr);
-
-	if (unlikely(!vma))
-		goto bad_area;
-
-	if (vma->vm_start <= addr)
-		goto good_area;
-
-	if (unlikely(!(vma->vm_flags & VM_GROWSDOWN)))
-		goto bad_area;
-
-	if (unlikely(expand_stack(vma, addr)))
-		goto bad_area;
-
-	/*
-	 * Ok, we have a good vm_area for this memory access, so
-	 * we can handle it..
-	 */
-
-good_area:
-	si_code = SEGV_ACCERR;
-
-	/* first do some preliminary protection checks */
-	if (entry == ENTRY_PTE_NOT_PRESENT) {
-		if (error_code & ITYPE_mskINST)
-			mask = VM_EXEC;
-		else {
-			mask = VM_READ | VM_WRITE;
-		}
-	} else if (entry == ENTRY_TLB_MISC) {
-		switch (error_code & ITYPE_mskETYPE) {
-		case RD_PROT:
-			mask = VM_READ;
-			break;
-		case WRT_PROT:
-			mask = VM_WRITE;
-			flags |= FAULT_FLAG_WRITE;
-			break;
-		case NOEXEC:
-			mask = VM_EXEC;
-			break;
-		case PAGE_MODIFY:
-			mask = VM_WRITE;
-			flags |= FAULT_FLAG_WRITE;
-			break;
-		case ACC_BIT:
-			BUG();
-		default:
-			break;
-		}
-
-	}
-	if (!(vma->vm_flags & mask))
-		goto bad_area;
-
-	/*
-	 * If for any reason at all we couldn't handle the fault,
-	 * make sure we exit gracefully rather than endlessly redo
-	 * the fault.
-	 */
-
-	fault = handle_mm_fault(vma, addr, flags, regs);
-
-	/*
-	 * If we need to retry but a fatal signal is pending, handle the
-	 * signal first. We do not need to release the mmap_lock because it
-	 * would already be released in __lock_page_or_retry in mm/filemap.c.
-	 */
-	if (fault_signal_pending(fault, regs)) {
-		if (!user_mode(regs))
-			goto no_context;
-		return;
-	}
-
-	if (unlikely(fault & VM_FAULT_ERROR)) {
-		if (fault & VM_FAULT_OOM)
-			goto out_of_memory;
-		else if (fault & VM_FAULT_SIGBUS)
-			goto do_sigbus;
-		else
-			goto bad_area;
-	}
-
-	if (fault & VM_FAULT_RETRY) {
-		flags |= FAULT_FLAG_TRIED;
-
-		/* No need to mmap_read_unlock(mm) as we would
-		 * have already released it in __lock_page_or_retry
-		 * in mm/filemap.c.
-		 */
-		goto retry;
-	}
-
-	mmap_read_unlock(mm);
-	return;
-
-	/*
-	 * Something tried to access memory that isn't in our memory map..
-	 * Fix it, but check if it's kernel or user first..
-	 */
-bad_area:
-	mmap_read_unlock(mm);
-
-bad_area_nosemaphore:
-
-	/* User mode accesses just cause a SIGSEGV */
-
-	if (user_mode(regs)) {
-		tsk->thread.address = addr;
-		tsk->thread.error_code = error_code;
-		tsk->thread.trap_no = entry;
-		force_sig_fault(SIGSEGV, si_code, (void __user *)addr);
-		return;
-	}
-
-no_context:
-
-	/* Are we prepared to handle this kernel fault?
-	 *
-	 * (The kernel has valid exception-points in the source
-	 *  when it acesses user-memory. When it fails in one
-	 *  of those points, we find it in a table and do a jump
-	 *  to some fixup code that loads an appropriate error
-	 *  code)
-	 */
-
-	{
-		const struct exception_table_entry *entry;
-
-		if ((entry =
-		     search_exception_tables(instruction_pointer(regs))) !=
-		    NULL) {
-			/* Adjust the instruction pointer in the stackframe */
-			instruction_pointer(regs) = entry->fixup;
-			return;
-		}
-	}
-
-	/*
-	 * Oops. The kernel tried to access some bad page. We'll have to
-	 * terminate things with extreme prejudice.
-	 */
-
-	bust_spinlocks(1);
-	pr_alert("Unable to handle kernel %s at virtual address %08lx\n",
-		 (addr < PAGE_SIZE) ? "NULL pointer dereference" :
-		 "paging request", addr);
-
-	show_pte(mm, addr);
-	die("Oops", regs, error_code);
-
-	/*
-	 * We ran out of memory, or some other thing happened to us that made
-	 * us unable to handle the page fault gracefully.
-	 */
-
-out_of_memory:
-	mmap_read_unlock(mm);
-	if (!user_mode(regs))
-		goto no_context;
-	pagefault_out_of_memory();
-	return;
-
-do_sigbus:
-	mmap_read_unlock(mm);
-
-	/* Kernel mode? Handle exceptions or die */
-	if (!user_mode(regs))
-		goto no_context;
-
-	/*
-	 * Send a sigbus
-	 */
-	tsk->thread.address = addr;
-	tsk->thread.error_code = error_code;
-	tsk->thread.trap_no = entry;
-	force_sig_fault(SIGBUS, BUS_ADRERR, (void __user *)addr);
-
-	return;
-
-vmalloc_fault:
-	{
-		/*
-		 * Synchronize this task's top level page-table
-		 * with the 'reference' page table.
-		 *
-		 * Use current_pgd instead of tsk->active_mm->pgd
-		 * since the latter might be unavailable if this
-		 * code is executed in a misfortunately run irq
-		 * (like inside schedule() between switch_mm and
-		 *  switch_to...).
-		 */
-
-		unsigned int index = pgd_index(addr);
-		pgd_t *pgd, *pgd_k;
-		p4d_t *p4d, *p4d_k;
-		pud_t *pud, *pud_k;
-		pmd_t *pmd, *pmd_k;
-		pte_t *pte_k;
-
-		pgd = (pgd_t *) __va(__nds32__mfsr(NDS32_SR_L1_PPTB)) + index;
-		pgd_k = init_mm.pgd + index;
-
-		if (!pgd_present(*pgd_k))
-			goto no_context;
-
-		p4d = p4d_offset(pgd, addr);
-		p4d_k = p4d_offset(pgd_k, addr);
-		if (!p4d_present(*p4d_k))
-			goto no_context;
-
-		pud = pud_offset(p4d, addr);
-		pud_k = pud_offset(p4d_k, addr);
-		if (!pud_present(*pud_k))
-			goto no_context;
-
-		pmd = pmd_offset(pud, addr);
-		pmd_k = pmd_offset(pud_k, addr);
-		if (!pmd_present(*pmd_k))
-			goto no_context;
-
-		if (!pmd_present(*pmd))
-			set_pmd(pmd, *pmd_k);
-		else
-			BUG_ON(pmd_page(*pmd) != pmd_page(*pmd_k));
-
-		/*
-		 * Since the vmalloc area is global, we don't
-		 * need to copy individual PTE's, it is enough to
-		 * copy the pgd pointer into the pte page of the
-		 * root task. If that is there, we'll find our pte if
-		 * it exists.
-		 */
-
-		/* Make sure the actual PTE exists as well to
-		 * catch kernel vmalloc-area accesses to non-mapped
-		 * addres. If we don't do this, this will just
-		 * silently loop forever.
-		 */
-
-		pte_k = pte_offset_kernel(pmd_k, addr);
-		if (!pte_present(*pte_k))
-			goto no_context;
-
-		return;
-	}
-}
diff --git a/arch/nds32/mm/init.c b/arch/nds32/mm/init.c
deleted file mode 100644
index f63f839738c4..000000000000
--- a/arch/nds32/mm/init.c
+++ /dev/null
@@ -1,263 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 1995-2005 Russell King
-// Copyright (C) 2012 ARM Ltd.
-// Copyright (C) 2013-2017 Andes Technology Corporation
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/swap.h>
-#include <linux/init.h>
-#include <linux/memblock.h>
-#include <linux/mman.h>
-#include <linux/nodemask.h>
-#include <linux/initrd.h>
-#include <linux/highmem.h>
-
-#include <asm/sections.h>
-#include <asm/setup.h>
-#include <asm/tlb.h>
-#include <asm/page.h>
-
-DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
-DEFINE_SPINLOCK(anon_alias_lock);
-extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
-
-/*
- * empty_zero_page is a special page that is used for
- * zero-initialized data and COW.
- */
-struct page *empty_zero_page;
-EXPORT_SYMBOL(empty_zero_page);
-
-static void __init zone_sizes_init(void)
-{
-	unsigned long max_zone_pfn[MAX_NR_ZONES] = { 0 };
-
-	max_zone_pfn[ZONE_NORMAL] = max_low_pfn;
-#ifdef CONFIG_HIGHMEM
-	max_zone_pfn[ZONE_HIGHMEM] = max_pfn;
-#endif
-	free_area_init(max_zone_pfn);
-
-}
-
-/*
- * Map all physical memory under high_memory into kernel's address space.
- *
- * This is explicitly coded for two-level page tables, so if you need
- * something else then this needs to change.
- */
-static void __init map_ram(void)
-{
-	unsigned long v, p, e;
-	pgd_t *pge;
-	p4d_t *p4e;
-	pud_t *pue;
-	pmd_t *pme;
-	pte_t *pte;
-	/* These mark extents of read-only kernel pages...
-	 * ...from vmlinux.lds.S
-	 */
-
-	p = (u32) memblock_start_of_DRAM() & PAGE_MASK;
-	e = min((u32) memblock_end_of_DRAM(), (u32) __pa(high_memory));
-
-	v = (u32) __va(p);
-	pge = pgd_offset_k(v);
-
-	while (p < e) {
-		int j;
-		p4e = p4d_offset(pge, v);
-		pue = pud_offset(p4e, v);
-		pme = pmd_offset(pue, v);
-
-		if ((u32) pue != (u32) pge || (u32) pme != (u32) pge) {
-			panic("%s: Kernel hardcoded for "
-			      "two-level page tables", __func__);
-		}
-
-		/* Alloc one page for holding PTE's... */
-		pte = memblock_alloc(PAGE_SIZE, PAGE_SIZE);
-		if (!pte)
-			panic("%s: Failed to allocate %lu bytes align=0x%lx\n",
-			      __func__, PAGE_SIZE, PAGE_SIZE);
-		set_pmd(pme, __pmd(__pa(pte) + _PAGE_KERNEL_TABLE));
-
-		/* Fill the newly allocated page with PTE'S */
-		for (j = 0; p < e && j < PTRS_PER_PTE;
-		     v += PAGE_SIZE, p += PAGE_SIZE, j++, pte++) {
-			/* Create mapping between p and v. */
-			/* TODO: more fine grant for page access permission */
-			set_pte(pte, __pte(p + pgprot_val(PAGE_KERNEL)));
-		}
-
-		pge++;
-	}
-}
-static pmd_t *fixmap_pmd_p;
-static void __init fixedrange_init(void)
-{
-	unsigned long vaddr;
-	pmd_t *pmd;
-#ifdef CONFIG_HIGHMEM
-	pte_t *pte;
-#endif /* CONFIG_HIGHMEM */
-
-	/*
-	 * Fixed mappings:
-	 */
-	vaddr = __fix_to_virt(__end_of_fixed_addresses - 1);
-	pmd = pmd_off_k(vaddr);
-	fixmap_pmd_p = memblock_alloc(PAGE_SIZE, PAGE_SIZE);
-	if (!fixmap_pmd_p)
-		panic("%s: Failed to allocate %lu bytes align=0x%lx\n",
-		      __func__, PAGE_SIZE, PAGE_SIZE);
-	set_pmd(pmd, __pmd(__pa(fixmap_pmd_p) + _PAGE_KERNEL_TABLE));
-
-#ifdef CONFIG_HIGHMEM
-	/*
-	 * Permanent kmaps:
-	 */
-	vaddr = PKMAP_BASE;
-
-	pmd = pmd_off_k(vaddr);
-	pte = memblock_alloc(PAGE_SIZE, PAGE_SIZE);
-	if (!pte)
-		panic("%s: Failed to allocate %lu bytes align=0x%lx\n",
-		      __func__, PAGE_SIZE, PAGE_SIZE);
-	set_pmd(pmd, __pmd(__pa(pte) + _PAGE_KERNEL_TABLE));
-	pkmap_page_table = pte;
-#endif /* CONFIG_HIGHMEM */
-}
-
-/*
- * paging_init() sets up the page tables, initialises the zone memory
- * maps, and sets up the zero page, bad page and bad page tables.
- */
-void __init paging_init(void)
-{
-	int i;
-	void *zero_page;
-
-	pr_info("Setting up paging and PTEs.\n");
-	/* clear out the init_mm.pgd that will contain the kernel's mappings */
-	for (i = 0; i < PTRS_PER_PGD; i++)
-		swapper_pg_dir[i] = __pgd(1);
-
-	map_ram();
-
-	fixedrange_init();
-
-	/* allocate space for empty_zero_page */
-	zero_page = memblock_alloc(PAGE_SIZE, PAGE_SIZE);
-	if (!zero_page)
-		panic("%s: Failed to allocate %lu bytes align=0x%lx\n",
-		      __func__, PAGE_SIZE, PAGE_SIZE);
-	zone_sizes_init();
-
-	empty_zero_page = virt_to_page(zero_page);
-	flush_dcache_page(empty_zero_page);
-}
-
-static inline void __init free_highmem(void)
-{
-#ifdef CONFIG_HIGHMEM
-	unsigned long pfn;
-	for (pfn = PFN_UP(__pa(high_memory)); pfn < max_pfn; pfn++) {
-		phys_addr_t paddr = (phys_addr_t) pfn << PAGE_SHIFT;
-		if (!memblock_is_reserved(paddr))
-			free_highmem_page(pfn_to_page(pfn));
-	}
-#endif
-}
-
-static void __init set_max_mapnr_init(void)
-{
-	max_mapnr = max_pfn;
-}
-
-/*
- * mem_init() marks the free areas in the mem_map and tells us how much
- * memory is free.  This is done after various parts of the system have
- * claimed their memory after the kernel image.
- */
-void __init mem_init(void)
-{
-	phys_addr_t memory_start = memblock_start_of_DRAM();
-	BUG_ON(!mem_map);
-	set_max_mapnr_init();
-
-	free_highmem();
-
-	/* this will put all low memory onto the freelists */
-	memblock_free_all();
-
-	pr_info("virtual kernel memory layout:\n"
-		"    fixmap  : 0x%08lx - 0x%08lx   (%4ld kB)\n"
-#ifdef CONFIG_HIGHMEM
-		"    pkmap   : 0x%08lx - 0x%08lx   (%4ld kB)\n"
-#endif
-		"    consist : 0x%08lx - 0x%08lx   (%4ld MB)\n"
-		"    vmalloc : 0x%08lx - 0x%08lx   (%4ld MB)\n"
-		"    lowmem  : 0x%08lx - 0x%08lx   (%4ld MB)\n"
-		"      .init : 0x%08lx - 0x%08lx   (%4ld kB)\n"
-		"      .data : 0x%08lx - 0x%08lx   (%4ld kB)\n"
-		"      .text : 0x%08lx - 0x%08lx   (%4ld kB)\n",
-		FIXADDR_START, FIXADDR_TOP, (FIXADDR_TOP - FIXADDR_START) >> 10,
-#ifdef CONFIG_HIGHMEM
-		PKMAP_BASE, PKMAP_BASE + LAST_PKMAP * PAGE_SIZE,
-		(LAST_PKMAP * PAGE_SIZE) >> 10,
-#endif
-		CONSISTENT_BASE, CONSISTENT_END,
-		((CONSISTENT_END) - (CONSISTENT_BASE)) >> 20, VMALLOC_START,
-		(unsigned long)VMALLOC_END, (VMALLOC_END - VMALLOC_START) >> 20,
-		(unsigned long)__va(memory_start), (unsigned long)high_memory,
-		((unsigned long)high_memory -
-		 (unsigned long)__va(memory_start)) >> 20,
-		(unsigned long)&__init_begin, (unsigned long)&__init_end,
-		((unsigned long)&__init_end -
-		 (unsigned long)&__init_begin) >> 10, (unsigned long)&_etext,
-		(unsigned long)&_edata,
-		((unsigned long)&_edata - (unsigned long)&_etext) >> 10,
-		(unsigned long)&_text, (unsigned long)&_etext,
-		((unsigned long)&_etext - (unsigned long)&_text) >> 10);
-
-	/*
-	 * Check boundaries twice: Some fundamental inconsistencies can
-	 * be detected at build time already.
-	 */
-#ifdef CONFIG_HIGHMEM
-	BUILD_BUG_ON(PKMAP_BASE + LAST_PKMAP * PAGE_SIZE > FIXADDR_START);
-	BUILD_BUG_ON((CONSISTENT_END) > PKMAP_BASE);
-#endif
-	BUILD_BUG_ON(VMALLOC_END > CONSISTENT_BASE);
-	BUILD_BUG_ON(VMALLOC_START >= VMALLOC_END);
-
-#ifdef CONFIG_HIGHMEM
-	BUG_ON(PKMAP_BASE + LAST_PKMAP * PAGE_SIZE > FIXADDR_START);
-	BUG_ON(CONSISTENT_END > PKMAP_BASE);
-#endif
-	BUG_ON(VMALLOC_END > CONSISTENT_BASE);
-	BUG_ON(VMALLOC_START >= VMALLOC_END);
-	BUG_ON((unsigned long)high_memory > VMALLOC_START);
-
-	return;
-}
-
-void __set_fixmap(enum fixed_addresses idx,
-			       phys_addr_t phys, pgprot_t flags)
-{
-	unsigned long addr = __fix_to_virt(idx);
-	pte_t *pte;
-
-	BUG_ON(idx <= FIX_HOLE || idx >= __end_of_fixed_addresses);
-
-	pte = (pte_t *)&fixmap_pmd_p[pte_index(addr)];
-
-	if (pgprot_val(flags)) {
-		set_pte(pte, pfn_pte(phys >> PAGE_SHIFT, flags));
-	} else {
-		pte_clear(&init_mm, addr, pte);
-		flush_tlb_kernel_range(addr, addr + PAGE_SIZE);
-	}
-}
diff --git a/arch/nds32/mm/mm-nds32.c b/arch/nds32/mm/mm-nds32.c
deleted file mode 100644
index f2778f2b39f6..000000000000
--- a/arch/nds32/mm/mm-nds32.c
+++ /dev/null
@@ -1,96 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#include <linux/init_task.h>
-
-#define __HAVE_ARCH_PGD_FREE
-#include <asm/pgalloc.h>
-
-#define FIRST_KERNEL_PGD_NR	(USER_PTRS_PER_PGD)
-
-/*
- * need to get a page for level 1
- */
-
-pgd_t *pgd_alloc(struct mm_struct *mm)
-{
-	pgd_t *new_pgd, *init_pgd;
-	int i;
-
-	new_pgd = (pgd_t *) __get_free_pages(GFP_KERNEL, 0);
-	if (!new_pgd)
-		return NULL;
-	for (i = 0; i < PTRS_PER_PGD; i++) {
-		(*new_pgd) = 1;
-		new_pgd++;
-	}
-	new_pgd -= PTRS_PER_PGD;
-
-	init_pgd = pgd_offset_k(0);
-
-	memcpy(new_pgd + FIRST_KERNEL_PGD_NR, init_pgd + FIRST_KERNEL_PGD_NR,
-	       (PTRS_PER_PGD - FIRST_KERNEL_PGD_NR) * sizeof(pgd_t));
-
-	cpu_dcache_wb_range((unsigned long)new_pgd,
-			    (unsigned long)new_pgd +
-			    PTRS_PER_PGD * sizeof(pgd_t));
-	inc_lruvec_page_state(virt_to_page((unsigned long *)new_pgd),
-			      NR_PAGETABLE);
-
-	return new_pgd;
-}
-
-void pgd_free(struct mm_struct *mm, pgd_t * pgd)
-{
-	pmd_t *pmd;
-	struct page *pte;
-
-	if (!pgd)
-		return;
-
-	pmd = (pmd_t *) pgd;
-	if (pmd_none(*pmd))
-		goto free;
-	if (pmd_bad(*pmd)) {
-		pmd_ERROR(*pmd);
-		pmd_clear(pmd);
-		goto free;
-	}
-
-	pte = pmd_page(*pmd);
-	pmd_clear(pmd);
-	dec_lruvec_page_state(virt_to_page((unsigned long *)pgd), NR_PAGETABLE);
-	pte_free(mm, pte);
-	mm_dec_nr_ptes(mm);
-	pmd_free(mm, pmd);
-free:
-	free_pages((unsigned long)pgd, 0);
-}
-
-/*
- * In order to soft-boot, we need to insert a 1:1 mapping in place of
- * the user-mode pages.  This will then ensure that we have predictable
- * results when turning the mmu off
- */
-void setup_mm_for_reboot(char mode)
-{
-	unsigned long pmdval;
-	pgd_t *pgd;
-	p4d_t *p4d;
-	pud_t *pud;
-	pmd_t *pmd;
-	int i;
-
-	if (current->mm && current->mm->pgd)
-		pgd = current->mm->pgd;
-	else
-		pgd = init_mm.pgd;
-
-	for (i = 0; i < USER_PTRS_PER_PGD; i++) {
-		pmdval = (i << PGDIR_SHIFT);
-		p4d = p4d_offset(pgd, i << PGDIR_SHIFT);
-		pud = pud_offset(p4d, i << PGDIR_SHIFT);
-		pmd = pmd_offset(pud + i, i << PGDIR_SHIFT);
-		set_pmd(pmd, __pmd(pmdval));
-	}
-}
diff --git a/arch/nds32/mm/mmap.c b/arch/nds32/mm/mmap.c
deleted file mode 100644
index 1bdf5e7d1b43..000000000000
--- a/arch/nds32/mm/mmap.c
+++ /dev/null
@@ -1,73 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#include <linux/sched.h>
-#include <linux/mman.h>
-#include <linux/shm.h>
-
-#define COLOUR_ALIGN(addr,pgoff)		\
-	((((addr)+SHMLBA-1)&~(SHMLBA-1)) +	\
-	 (((pgoff)<<PAGE_SHIFT) & (SHMLBA-1)))
-
-/*
- * We need to ensure that shared mappings are correctly aligned to
- * avoid aliasing issues with VIPT caches.  We need to ensure that
- * a specific page of an object is always mapped at a multiple of
- * SHMLBA bytes.
- *
- * We unconditionally provide this function for all cases, however
- * in the VIVT case, we optimise out the alignment rules.
- */
-unsigned long
-arch_get_unmapped_area(struct file *filp, unsigned long addr,
-		       unsigned long len, unsigned long pgoff,
-		       unsigned long flags)
-{
-	struct mm_struct *mm = current->mm;
-	struct vm_area_struct *vma;
-	int do_align = 0;
-	struct vm_unmapped_area_info info;
-	int aliasing = 0;
-	if(IS_ENABLED(CONFIG_CPU_CACHE_ALIASING))
-		aliasing = 1;
-
-	/*
-	 * We only need to do colour alignment if either the I or D
-	 * caches alias.
-	 */
-	if (aliasing)
-		do_align = filp || (flags & MAP_SHARED);
-
-	/*
-	 * We enforce the MAP_FIXED case.
-	 */
-	if (flags & MAP_FIXED) {
-		if (aliasing && flags & MAP_SHARED &&
-		    (addr - (pgoff << PAGE_SHIFT)) & (SHMLBA - 1))
-			return -EINVAL;
-		return addr;
-	}
-
-	if (len > TASK_SIZE)
-		return -ENOMEM;
-
-	if (addr) {
-		if (do_align)
-			addr = COLOUR_ALIGN(addr, pgoff);
-		else
-			addr = PAGE_ALIGN(addr);
-
-		vma = find_vma(mm, addr);
-		if (TASK_SIZE - len >= addr &&
-		    (!vma || addr + len <= vm_start_gap(vma)))
-			return addr;
-	}
-
-	info.flags = 0;
-	info.length = len;
-	info.low_limit = mm->mmap_base;
-	info.high_limit = TASK_SIZE;
-	info.align_mask = do_align ? (PAGE_MASK & (SHMLBA - 1)) : 0;
-	info.align_offset = pgoff << PAGE_SHIFT;
-	return vm_unmapped_area(&info);
-}
diff --git a/arch/nds32/mm/proc.c b/arch/nds32/mm/proc.c
deleted file mode 100644
index 848c845f5f33..000000000000
--- a/arch/nds32/mm/proc.c
+++ /dev/null
@@ -1,536 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <asm/nds32.h>
-#include <asm/tlbflush.h>
-#include <asm/cacheflush.h>
-#include <asm/l2_cache.h>
-#include <nds32_intrinsic.h>
-
-#include <asm/cache_info.h>
-extern struct cache_info L1_cache_info[2];
-
-int va_kernel_present(unsigned long addr)
-{
-	pmd_t *pmd;
-	pte_t *ptep, pte;
-
-	pmd = pmd_off_k(addr);
-	if (!pmd_none(*pmd)) {
-		ptep = pte_offset_map(pmd, addr);
-		pte = *ptep;
-		if (pte_present(pte))
-			return pte;
-	}
-	return 0;
-}
-
-pte_t va_present(struct mm_struct * mm, unsigned long addr)
-{
-	pgd_t *pgd;
-	p4d_t *p4d;
-	pud_t *pud;
-	pmd_t *pmd;
-	pte_t *ptep, pte;
-
-	pgd = pgd_offset(mm, addr);
-	if (!pgd_none(*pgd)) {
-		p4d = p4d_offset(pgd, addr);
-		if (!p4d_none(*p4d)) {
-			pud = pud_offset(p4d, addr);
-			if (!pud_none(*pud)) {
-				pmd = pmd_offset(pud, addr);
-				if (!pmd_none(*pmd)) {
-					ptep = pte_offset_map(pmd, addr);
-					pte = *ptep;
-					if (pte_present(pte))
-						return pte;
-				}
-			}
-		}
-	}
-	return 0;
-
-}
-
-int va_readable(struct pt_regs *regs, unsigned long addr)
-{
-	struct mm_struct *mm = current->mm;
-	pte_t pte;
-	int ret = 0;
-
-	if (user_mode(regs)) {
-		/* user mode */
-		pte = va_present(mm, addr);
-		if (!pte && pte_read(pte))
-			ret = 1;
-	} else {
-		/* superuser mode is always readable, so we can only
-		 * check it is present or not*/
-		return (! !va_kernel_present(addr));
-	}
-	return ret;
-}
-
-int va_writable(struct pt_regs *regs, unsigned long addr)
-{
-	struct mm_struct *mm = current->mm;
-	pte_t pte;
-	int ret = 0;
-
-	if (user_mode(regs)) {
-		/* user mode */
-		pte = va_present(mm, addr);
-		if (!pte && pte_write(pte))
-			ret = 1;
-	} else {
-		/* superuser mode */
-		pte = va_kernel_present(addr);
-		if (!pte && pte_kernel_write(pte))
-			ret = 1;
-	}
-	return ret;
-}
-
-/*
- * All
- */
-void cpu_icache_inval_all(void)
-{
-	unsigned long end, line_size;
-
-	line_size = L1_cache_info[ICACHE].line_size;
-	end =
-	    line_size * L1_cache_info[ICACHE].ways * L1_cache_info[ICACHE].sets;
-
-	do {
-		end -= line_size;
-		__asm__ volatile ("\n\tcctl %0, L1I_IX_INVAL"::"r" (end));
-		end -= line_size;
-		__asm__ volatile ("\n\tcctl %0, L1I_IX_INVAL"::"r" (end));
-		end -= line_size;
-		__asm__ volatile ("\n\tcctl %0, L1I_IX_INVAL"::"r" (end));
-		end -= line_size;
-		__asm__ volatile ("\n\tcctl %0, L1I_IX_INVAL"::"r" (end));
-	} while (end > 0);
-	__nds32__isb();
-}
-
-void cpu_dcache_inval_all(void)
-{
-	__nds32__cctl_l1d_invalall();
-}
-
-#ifdef CONFIG_CACHE_L2
-void dcache_wb_all_level(void)
-{
-	unsigned long flags, cmd;
-	local_irq_save(flags);
-	__nds32__cctl_l1d_wball_alvl();
-	/* Section 1: Ensure the section 2 & 3 program code execution after */
-	__nds32__cctlidx_read(NDS32_CCTL_L1D_IX_RWD,0);
-
-	/* Section 2: Confirm the writeback all level is done in CPU and L2C */
-	cmd = CCTL_CMD_L2_SYNC;
-	L2_CMD_RDY();
-	L2C_W_REG(L2_CCTL_CMD_OFF, cmd);
-	L2_CMD_RDY();
-
-	/* Section 3: Writeback whole L2 cache */
-	cmd = CCTL_ALL_CMD | CCTL_CMD_L2_IX_WB;
-	L2_CMD_RDY();
-	L2C_W_REG(L2_CCTL_CMD_OFF, cmd);
-	L2_CMD_RDY();
-	__nds32__msync_all();
-	local_irq_restore(flags);
-}
-EXPORT_SYMBOL(dcache_wb_all_level);
-#endif
-
-void cpu_dcache_wb_all(void)
-{
-	__nds32__cctl_l1d_wball_one_lvl();
-	__nds32__cctlidx_read(NDS32_CCTL_L1D_IX_RWD,0);
-}
-
-void cpu_dcache_wbinval_all(void)
-{
-#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
-	unsigned long flags;
-	local_irq_save(flags);
-#endif
-	cpu_dcache_wb_all();
-	cpu_dcache_inval_all();
-#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
-	local_irq_restore(flags);
-#endif
-}
-
-/*
- * Page
- */
-void cpu_icache_inval_page(unsigned long start)
-{
-	unsigned long line_size, end;
-
-	line_size = L1_cache_info[ICACHE].line_size;
-	end = start + PAGE_SIZE;
-
-	do {
-		end -= line_size;
-		__asm__ volatile ("\n\tcctl %0, L1I_VA_INVAL"::"r" (end));
-		end -= line_size;
-		__asm__ volatile ("\n\tcctl %0, L1I_VA_INVAL"::"r" (end));
-		end -= line_size;
-		__asm__ volatile ("\n\tcctl %0, L1I_VA_INVAL"::"r" (end));
-		end -= line_size;
-		__asm__ volatile ("\n\tcctl %0, L1I_VA_INVAL"::"r" (end));
-	} while (end != start);
-	__nds32__isb();
-}
-
-void cpu_dcache_inval_page(unsigned long start)
-{
-	unsigned long line_size, end;
-
-	line_size = L1_cache_info[DCACHE].line_size;
-	end = start + PAGE_SIZE;
-
-	do {
-		end -= line_size;
-		__asm__ volatile ("\n\tcctl %0, L1D_VA_INVAL"::"r" (end));
-		end -= line_size;
-		__asm__ volatile ("\n\tcctl %0, L1D_VA_INVAL"::"r" (end));
-		end -= line_size;
-		__asm__ volatile ("\n\tcctl %0, L1D_VA_INVAL"::"r" (end));
-		end -= line_size;
-		__asm__ volatile ("\n\tcctl %0, L1D_VA_INVAL"::"r" (end));
-	} while (end != start);
-}
-
-void cpu_dcache_wb_page(unsigned long start)
-{
-#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
-	unsigned long line_size, end;
-
-	line_size = L1_cache_info[DCACHE].line_size;
-	end = start + PAGE_SIZE;
-
-	do {
-		end -= line_size;
-		__asm__ volatile ("\n\tcctl %0, L1D_VA_WB"::"r" (end));
-		end -= line_size;
-		__asm__ volatile ("\n\tcctl %0, L1D_VA_WB"::"r" (end));
-		end -= line_size;
-		__asm__ volatile ("\n\tcctl %0, L1D_VA_WB"::"r" (end));
-		end -= line_size;
-		__asm__ volatile ("\n\tcctl %0, L1D_VA_WB"::"r" (end));
-	} while (end != start);
-	__nds32__cctlidx_read(NDS32_CCTL_L1D_IX_RWD,0);
-#endif
-}
-
-void cpu_dcache_wbinval_page(unsigned long start)
-{
-	unsigned long line_size, end;
-
-	line_size = L1_cache_info[DCACHE].line_size;
-	end = start + PAGE_SIZE;
-
-	do {
-		end -= line_size;
-#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
-		__asm__ volatile ("\n\tcctl %0, L1D_VA_WB"::"r" (end));
-#endif
-		__asm__ volatile ("\n\tcctl %0, L1D_VA_INVAL"::"r" (end));
-		end -= line_size;
-#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
-		__asm__ volatile ("\n\tcctl %0, L1D_VA_WB"::"r" (end));
-#endif
-		__asm__ volatile ("\n\tcctl %0, L1D_VA_INVAL"::"r" (end));
-		end -= line_size;
-#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
-		__asm__ volatile ("\n\tcctl %0, L1D_VA_WB"::"r" (end));
-#endif
-		__asm__ volatile ("\n\tcctl %0, L1D_VA_INVAL"::"r" (end));
-		end -= line_size;
-#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
-		__asm__ volatile ("\n\tcctl %0, L1D_VA_WB"::"r" (end));
-#endif
-		__asm__ volatile ("\n\tcctl %0, L1D_VA_INVAL"::"r" (end));
-	} while (end != start);
-	__nds32__cctlidx_read(NDS32_CCTL_L1D_IX_RWD,0);
-}
-
-void cpu_cache_wbinval_page(unsigned long page, int flushi)
-{
-	cpu_dcache_wbinval_page(page);
-	if (flushi)
-		cpu_icache_inval_page(page);
-}
-
-/*
- * Range
- */
-void cpu_icache_inval_range(unsigned long start, unsigned long end)
-{
-	unsigned long line_size;
-
-	line_size = L1_cache_info[ICACHE].line_size;
-
-	while (end > start) {
-		__asm__ volatile ("\n\tcctl %0, L1I_VA_INVAL"::"r" (start));
-		start += line_size;
-	}
-	__nds32__isb();
-}
-
-void cpu_dcache_inval_range(unsigned long start, unsigned long end)
-{
-	unsigned long line_size;
-
-	line_size = L1_cache_info[DCACHE].line_size;
-
-	while (end > start) {
-		__asm__ volatile ("\n\tcctl %0, L1D_VA_INVAL"::"r" (start));
-		start += line_size;
-	}
-}
-
-void cpu_dcache_wb_range(unsigned long start, unsigned long end)
-{
-#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
-	unsigned long line_size;
-
-	line_size = L1_cache_info[DCACHE].line_size;
-
-	while (end > start) {
-		__asm__ volatile ("\n\tcctl %0, L1D_VA_WB"::"r" (start));
-		start += line_size;
-	}
-	__nds32__cctlidx_read(NDS32_CCTL_L1D_IX_RWD,0);
-#endif
-}
-
-void cpu_dcache_wbinval_range(unsigned long start, unsigned long end)
-{
-	unsigned long line_size;
-
-	line_size = L1_cache_info[DCACHE].line_size;
-
-	while (end > start) {
-#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
-		__asm__ volatile ("\n\tcctl %0, L1D_VA_WB"::"r" (start));
-#endif
-		__asm__ volatile ("\n\tcctl %0, L1D_VA_INVAL"::"r" (start));
-		start += line_size;
-	}
-	__nds32__cctlidx_read(NDS32_CCTL_L1D_IX_RWD,0);
-}
-
-void cpu_cache_wbinval_range(unsigned long start, unsigned long end, int flushi)
-{
-	unsigned long line_size, align_start, align_end;
-
-	line_size = L1_cache_info[DCACHE].line_size;
-	align_start = start & ~(line_size - 1);
-	align_end = (end + line_size - 1) & ~(line_size - 1);
-	cpu_dcache_wbinval_range(align_start, align_end);
-
-	if (flushi) {
-		line_size = L1_cache_info[ICACHE].line_size;
-		align_start = start & ~(line_size - 1);
-		align_end = (end + line_size - 1) & ~(line_size - 1);
-		cpu_icache_inval_range(align_start, align_end);
-	}
-}
-
-void cpu_cache_wbinval_range_check(struct vm_area_struct *vma,
-				   unsigned long start, unsigned long end,
-				   bool flushi, bool wbd)
-{
-	unsigned long line_size, t_start, t_end;
-
-	if (!flushi && !wbd)
-		return;
-	line_size = L1_cache_info[DCACHE].line_size;
-	start = start & ~(line_size - 1);
-	end = (end + line_size - 1) & ~(line_size - 1);
-
-	if ((end - start) > (8 * PAGE_SIZE)) {
-		if (wbd)
-			cpu_dcache_wbinval_all();
-		if (flushi)
-			cpu_icache_inval_all();
-		return;
-	}
-
-	t_start = (start + PAGE_SIZE) & PAGE_MASK;
-	t_end = ((end - 1) & PAGE_MASK);
-
-	if ((start & PAGE_MASK) == t_end) {
-		if (va_present(vma->vm_mm, start)) {
-			if (wbd)
-				cpu_dcache_wbinval_range(start, end);
-			if (flushi)
-				cpu_icache_inval_range(start, end);
-		}
-		return;
-	}
-
-	if (va_present(vma->vm_mm, start)) {
-		if (wbd)
-			cpu_dcache_wbinval_range(start, t_start);
-		if (flushi)
-			cpu_icache_inval_range(start, t_start);
-	}
-
-	if (va_present(vma->vm_mm, end - 1)) {
-		if (wbd)
-			cpu_dcache_wbinval_range(t_end, end);
-		if (flushi)
-			cpu_icache_inval_range(t_end, end);
-	}
-
-	while (t_start < t_end) {
-		if (va_present(vma->vm_mm, t_start)) {
-			if (wbd)
-				cpu_dcache_wbinval_page(t_start);
-			if (flushi)
-				cpu_icache_inval_page(t_start);
-		}
-		t_start += PAGE_SIZE;
-	}
-}
-
-#ifdef CONFIG_CACHE_L2
-static inline void cpu_l2cache_op(unsigned long start, unsigned long end, unsigned long op)
-{
-	if (atl2c_base) {
-		unsigned long p_start = __pa(start);
-		unsigned long p_end = __pa(end);
-		unsigned long cmd;
-		unsigned long line_size;
-		/* TODO Can Use PAGE Mode to optimize if range large than PAGE_SIZE */
-		line_size = L2_CACHE_LINE_SIZE();
-		p_start = p_start & (~(line_size - 1));
-		p_end = (p_end + line_size - 1) & (~(line_size - 1));
-		cmd =
-		    (p_start & ~(line_size - 1)) | op |
-		    CCTL_SINGLE_CMD;
-		do {
-			L2_CMD_RDY();
-			L2C_W_REG(L2_CCTL_CMD_OFF, cmd);
-			cmd += line_size;
-			p_start += line_size;
-		} while (p_end > p_start);
-		cmd = CCTL_CMD_L2_SYNC;
-		L2_CMD_RDY();
-		L2C_W_REG(L2_CCTL_CMD_OFF, cmd);
-		L2_CMD_RDY();
-	}
-}
-#else
-#define cpu_l2cache_op(start,end,op) do { } while (0)
-#endif
-/*
- * DMA
- */
-void cpu_dma_wb_range(unsigned long start, unsigned long end)
-{
-	unsigned long line_size;
-	unsigned long flags;
-	line_size = L1_cache_info[DCACHE].line_size;
-	start = start & (~(line_size - 1));
-	end = (end + line_size - 1) & (~(line_size - 1));
-	if (unlikely(start == end))
-		return;
-
-	local_irq_save(flags);
-	cpu_dcache_wb_range(start, end);
-	cpu_l2cache_op(start, end, CCTL_CMD_L2_PA_WB);
-	__nds32__msync_all();
-	local_irq_restore(flags);
-}
-
-void cpu_dma_inval_range(unsigned long start, unsigned long end)
-{
-	unsigned long line_size;
-	unsigned long old_start = start;
-	unsigned long old_end = end;
-	unsigned long flags;
-	line_size = L1_cache_info[DCACHE].line_size;
-	start = start & (~(line_size - 1));
-	end = (end + line_size - 1) & (~(line_size - 1));
-	if (unlikely(start == end))
-		return;
-	local_irq_save(flags);
-	if (start != old_start) {
-		cpu_dcache_wbinval_range(start, start + line_size);
-		cpu_l2cache_op(start, start + line_size, CCTL_CMD_L2_PA_WBINVAL);
-	}
-	if (end != old_end) {
-		cpu_dcache_wbinval_range(end - line_size, end);
-		cpu_l2cache_op(end - line_size, end, CCTL_CMD_L2_PA_WBINVAL);
-	}
-	cpu_dcache_inval_range(start, end);
-	cpu_l2cache_op(start, end, CCTL_CMD_L2_PA_INVAL);
-	__nds32__msync_all();
-	local_irq_restore(flags);
-
-}
-
-void cpu_dma_wbinval_range(unsigned long start, unsigned long end)
-{
-	unsigned long line_size;
-	unsigned long flags;
-	line_size = L1_cache_info[DCACHE].line_size;
-	start = start & (~(line_size - 1));
-	end = (end + line_size - 1) & (~(line_size - 1));
-	if (unlikely(start == end))
-		return;
-
-	local_irq_save(flags);
-	cpu_dcache_wbinval_range(start, end);
-	cpu_l2cache_op(start, end, CCTL_CMD_L2_PA_WBINVAL);
-	__nds32__msync_all();
-	local_irq_restore(flags);
-}
-
-void cpu_proc_init(void)
-{
-}
-
-void cpu_proc_fin(void)
-{
-}
-
-void cpu_do_idle(void)
-{
-	__nds32__standby_no_wake_grant();
-}
-
-void cpu_reset(unsigned long reset)
-{
-	u32 tmp;
-	GIE_DISABLE();
-	tmp = __nds32__mfsr(NDS32_SR_CACHE_CTL);
-	tmp &= ~(CACHE_CTL_mskIC_EN | CACHE_CTL_mskDC_EN);
-	__nds32__mtsr_isb(tmp, NDS32_SR_CACHE_CTL);
-	cpu_dcache_wbinval_all();
-	cpu_icache_inval_all();
-
-	__asm__ __volatile__("jr.toff %0\n\t"::"r"(reset));
-}
-
-void cpu_switch_mm(struct mm_struct *mm)
-{
-	unsigned long cid;
-	cid = __nds32__mfsr(NDS32_SR_TLB_MISC);
-	cid = (cid & ~TLB_MISC_mskCID) | mm->context.id;
-	__nds32__mtsr_dsb(cid, NDS32_SR_TLB_MISC);
-	__nds32__mtsr_isb(__pa(mm->pgd), NDS32_SR_L1_PPTB);
-}
diff --git a/arch/nds32/mm/tlb.c b/arch/nds32/mm/tlb.c
deleted file mode 100644
index dd41f5e0712f..000000000000
--- a/arch/nds32/mm/tlb.c
+++ /dev/null
@@ -1,50 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2005-2017 Andes Technology Corporation
-
-#include <linux/spinlock_types.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <asm/nds32.h>
-#include <nds32_intrinsic.h>
-
-unsigned int cpu_last_cid = { TLB_MISC_mskCID + (2 << TLB_MISC_offCID) };
-
-DEFINE_SPINLOCK(cid_lock);
-
-void local_flush_tlb_range(struct vm_area_struct *vma,
-			   unsigned long start, unsigned long end)
-{
-	unsigned long flags, ocid, ncid;
-
-	if ((end - start) > 0x400000) {
-		__nds32__tlbop_flua();
-		__nds32__isb();
-		return;
-	}
-
-	spin_lock_irqsave(&cid_lock, flags);
-	ocid = __nds32__mfsr(NDS32_SR_TLB_MISC);
-	ncid = (ocid & ~TLB_MISC_mskCID) | vma->vm_mm->context.id;
-	__nds32__mtsr_dsb(ncid, NDS32_SR_TLB_MISC);
-	while (start < end) {
-		__nds32__tlbop_inv(start);
-		__nds32__isb();
-		start += PAGE_SIZE;
-	}
-	__nds32__mtsr_dsb(ocid, NDS32_SR_TLB_MISC);
-	spin_unlock_irqrestore(&cid_lock, flags);
-}
-
-void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
-{
-	unsigned long flags, ocid, ncid;
-
-	spin_lock_irqsave(&cid_lock, flags);
-	ocid = __nds32__mfsr(NDS32_SR_TLB_MISC);
-	ncid = (ocid & ~TLB_MISC_mskCID) | vma->vm_mm->context.id;
-	__nds32__mtsr_dsb(ncid, NDS32_SR_TLB_MISC);
-	__nds32__tlbop_inv(addr);
-	__nds32__isb();
-	__nds32__mtsr_dsb(ocid, NDS32_SR_TLB_MISC);
-	spin_unlock_irqrestore(&cid_lock, flags);
-}
diff --git a/arch/nios2/Kconfig b/arch/nios2/Kconfig
index 33fd06f5fa41..4167f1eb4cd8 100644
--- a/arch/nios2/Kconfig
+++ b/arch/nios2/Kconfig
@@ -24,7 +24,6 @@ config NIOS2
 	select USB_ARCH_HAS_HCD if USB_SUPPORT
 	select CPU_NO_EFFICIENT_FFS
 	select MMU_GATHER_NO_RANGE if MMU
-	select SET_FS
 
 config GENERIC_CSUM
 	def_bool y
diff --git a/arch/nios2/include/asm/pgtable.h b/arch/nios2/include/asm/pgtable.h
index 4a995fa628ee..262d0609268c 100644
--- a/arch/nios2/include/asm/pgtable.h
+++ b/arch/nios2/include/asm/pgtable.h
@@ -235,6 +235,7 @@ static inline void pte_clear(struct mm_struct *mm,
  * and a page entry and page directory to the page they refer to.
  */
 #define pmd_phys(pmd)		virt_to_phys((void *)pmd_val(pmd))
+#define pmd_pfn(pmd)		(pmd_phys(pmd) >> PAGE_SHIFT)
 #define pmd_page(pmd)		(pfn_to_page(pmd_phys(pmd) >> PAGE_SHIFT))
 
 static inline unsigned long pmd_page_vaddr(pmd_t pmd)
diff --git a/arch/nios2/include/asm/thread_info.h b/arch/nios2/include/asm/thread_info.h
index 272d2c72a727..bcc0e9915ebd 100644
--- a/arch/nios2/include/asm/thread_info.h
+++ b/arch/nios2/include/asm/thread_info.h
@@ -26,10 +26,6 @@
 
 #ifndef __ASSEMBLY__
 
-typedef struct {
-	unsigned long seg;
-} mm_segment_t;
-
 /*
  * low level task data that entry.S needs immediate access to
  * - this struct should fit entirely inside of one cache line
@@ -42,10 +38,6 @@ struct thread_info {
 	unsigned long		flags;		/* low level flags */
 	__u32			cpu;		/* current CPU */
 	int			preempt_count;	/* 0 => preemptable,<0 => BUG */
-	mm_segment_t		addr_limit;	/* thread address space:
-						  0-0x7FFFFFFF for user-thead
-						  0-0xFFFFFFFF for kernel-thread
-						*/
 	struct pt_regs		*regs;
 };
 
@@ -60,7 +52,6 @@ struct thread_info {
 	.flags		= 0,			\
 	.cpu		= 0,			\
 	.preempt_count	= INIT_PREEMPT_COUNT,	\
-	.addr_limit	= KERNEL_DS,		\
 }
 
 /* how to get the thread information struct from C */
diff --git a/arch/nios2/include/asm/uaccess.h b/arch/nios2/include/asm/uaccess.h
index ba9340e96fd4..b8299082adbe 100644
--- a/arch/nios2/include/asm/uaccess.h
+++ b/arch/nios2/include/asm/uaccess.h
@@ -18,31 +18,10 @@
 #include <asm/page.h>
 
 #include <asm/extable.h>
-
-/*
- * Segment stuff
- */
-#define MAKE_MM_SEG(s)		((mm_segment_t) { (s) })
-#define USER_DS			MAKE_MM_SEG(0x80000000UL)
-#define KERNEL_DS		MAKE_MM_SEG(0)
-
-
-#define get_fs()		(current_thread_info()->addr_limit)
-#define set_fs(seg)		(current_thread_info()->addr_limit = (seg))
-
-#define uaccess_kernel() (get_fs().seg == KERNEL_DS.seg)
-
-#define __access_ok(addr, len)			\
-	(((signed long)(((long)get_fs().seg) &	\
-		((long)(addr) | (((long)(addr)) + (len)) | (len)))) == 0)
-
-#define access_ok(addr, len)		\
-	likely(__access_ok((unsigned long)(addr), (unsigned long)(len)))
+#include <asm-generic/access_ok.h>
 
 # define __EX_TABLE_SECTION	".section __ex_table,\"a\"\n"
 
-#define user_addr_max() (uaccess_kernel() ? ~0UL : TASK_SIZE)
-
 /*
  * Zero Userspace
  */
@@ -88,6 +67,7 @@ extern __must_check long strnlen_user(const char __user *s, long n);
 /* Optimized macros */
 #define __get_user_asm(val, insn, addr, err)				\
 {									\
+	unsigned long __gu_val;						\
 	__asm__ __volatile__(						\
 	"       movi    %0, %3\n"					\
 	"1:   " insn " %1, 0(%2)\n"					\
@@ -96,14 +76,20 @@ extern __must_check long strnlen_user(const char __user *s, long n);
 	"       .section __ex_table,\"a\"\n"				\
 	"       .word 1b, 2b\n"						\
 	"       .previous"						\
-	: "=&r" (err), "=r" (val)					\
+	: "=&r" (err), "=r" (__gu_val)					\
 	: "r" (addr), "i" (-EFAULT));					\
+	val = (__force __typeof__(*(addr)))__gu_val;			\
 }
 
-#define __get_user_unknown(val, size, ptr, err) do {			\
+extern void __get_user_unknown(void);
+
+#define __get_user_8(val, ptr, err) do {				\
+	u64 __val = 0;							\
 	err = 0;							\
-	if (__copy_from_user(&(val), ptr, size)) {			\
+	if (raw_copy_from_user(&(__val), ptr, sizeof(val))) {		\
 		err = -EFAULT;						\
+	} else {							\
+		val = (typeof(val))(typeof((val) - (val)))__val;	\
 	}								\
 	} while (0)
 
@@ -119,8 +105,11 @@ do {									\
 	case 4:								\
 		__get_user_asm(val, "ldw", ptr, err);			\
 		break;							\
+	case 8:								\
+		__get_user_8(val, ptr, err);				\
+		break;							\
 	default:							\
-		__get_user_unknown(val, size, ptr, err);		\
+		__get_user_unknown();					\
 		break;							\
 	}								\
 } while (0)
@@ -129,9 +118,7 @@ do {									\
 	({								\
 	long __gu_err = -EFAULT;					\
 	const __typeof__(*(ptr)) __user *__gu_ptr = (ptr);		\
-	unsigned long __gu_val = 0;					\
-	__get_user_common(__gu_val, sizeof(*(ptr)), __gu_ptr, __gu_err);\
-	(x) = (__force __typeof__(x))__gu_val;				\
+	__get_user_common(x, sizeof(*(ptr)), __gu_ptr, __gu_err);	\
 	__gu_err;							\
 	})
 
@@ -139,11 +126,9 @@ do {									\
 ({									\
 	long __gu_err = -EFAULT;					\
 	const __typeof__(*(ptr)) __user *__gu_ptr = (ptr);		\
-	unsigned long __gu_val = 0;					\
 	if (access_ok( __gu_ptr, sizeof(*__gu_ptr)))	\
-		__get_user_common(__gu_val, sizeof(*__gu_ptr),		\
+		__get_user_common(x, sizeof(*__gu_ptr),			\
 			__gu_ptr, __gu_err);				\
-	(x) = (__force __typeof__(x))__gu_val;				\
 	__gu_err;							\
 })
 
@@ -161,34 +146,44 @@ do {									\
 	: "r" (val), "r" (ptr), "i" (-EFAULT));				\
 }
 
-#define put_user(x, ptr)						\
+#define __put_user_common(__pu_val, __pu_ptr)				\
 ({									\
 	long __pu_err = -EFAULT;					\
-	__typeof__(*(ptr)) __user *__pu_ptr = (ptr);			\
-	__typeof__(*(ptr)) __pu_val = (__typeof(*ptr))(x);		\
-	if (access_ok(__pu_ptr, sizeof(*__pu_ptr))) {	\
-		switch (sizeof(*__pu_ptr)) {				\
-		case 1:							\
-			__put_user_asm(__pu_val, "stb", __pu_ptr, __pu_err); \
-			break;						\
-		case 2:							\
-			__put_user_asm(__pu_val, "sth", __pu_ptr, __pu_err); \
-			break;						\
-		case 4:							\
-			__put_user_asm(__pu_val, "stw", __pu_ptr, __pu_err); \
-			break;						\
-		default:						\
-			/* XXX: This looks wrong... */			\
-			__pu_err = 0;					\
-			if (copy_to_user(__pu_ptr, &(__pu_val),		\
-				sizeof(*__pu_ptr)))			\
-				__pu_err = -EFAULT;			\
-			break;						\
-		}							\
+	switch (sizeof(*__pu_ptr)) {					\
+	case 1:								\
+		__put_user_asm(__pu_val, "stb", __pu_ptr, __pu_err);	\
+		break;							\
+	case 2:								\
+		__put_user_asm(__pu_val, "sth", __pu_ptr, __pu_err);	\
+		break;							\
+	case 4:								\
+		__put_user_asm(__pu_val, "stw", __pu_ptr, __pu_err);	\
+		break;							\
+	default:							\
+		/* XXX: This looks wrong... */				\
+		__pu_err = 0;						\
+		if (__copy_to_user(__pu_ptr, &(__pu_val),		\
+			sizeof(*__pu_ptr)))				\
+			__pu_err = -EFAULT;				\
+		break;							\
 	}								\
 	__pu_err;							\
 })
 
-#define __put_user(x, ptr) put_user(x, ptr)
+#define __put_user(x, ptr)						\
+({									\
+	__auto_type __pu_ptr = (ptr);					\
+	typeof(*__pu_ptr) __pu_val = (typeof(*__pu_ptr))(x);		\
+	__put_user_common(__pu_val, __pu_ptr);				\
+})
+
+#define put_user(x, ptr)						\
+({									\
+	__auto_type __pu_ptr = (ptr);					\
+	typeof(*__pu_ptr) __pu_val = (typeof(*__pu_ptr))(x);		\
+	access_ok(__pu_ptr, sizeof(*__pu_ptr)) ?			\
+		__put_user_common(__pu_val, __pu_ptr) :			\
+		-EFAULT;						\
+})
 
 #endif /* _ASM_NIOS2_UACCESS_H */
diff --git a/arch/nios2/kernel/signal.c b/arch/nios2/kernel/signal.c
index 2009ae2d3c3b..386e46443b60 100644
--- a/arch/nios2/kernel/signal.c
+++ b/arch/nios2/kernel/signal.c
@@ -36,10 +36,10 @@ struct rt_sigframe {
 
 static inline int rt_restore_ucontext(struct pt_regs *regs,
 					struct switch_stack *sw,
-					struct ucontext *uc, int *pr2)
+					struct ucontext __user *uc, int *pr2)
 {
 	int temp;
-	unsigned long *gregs = uc->uc_mcontext.gregs;
+	unsigned long __user *gregs = uc->uc_mcontext.gregs;
 	int err;
 
 	/* Always make any pending restarted system calls return -EINTR */
@@ -102,10 +102,11 @@ asmlinkage int do_rt_sigreturn(struct switch_stack *sw)
 {
 	struct pt_regs *regs = (struct pt_regs *)(sw + 1);
 	/* Verify, can we follow the stack back */
-	struct rt_sigframe *frame = (struct rt_sigframe *) regs->sp;
+	struct rt_sigframe __user *frame;
 	sigset_t set;
 	int rval;
 
+	frame = (struct rt_sigframe __user *) regs->sp;
 	if (!access_ok(frame, sizeof(*frame)))
 		goto badframe;
 
@@ -124,10 +125,10 @@ badframe:
 	return 0;
 }
 
-static inline int rt_setup_ucontext(struct ucontext *uc, struct pt_regs *regs)
+static inline int rt_setup_ucontext(struct ucontext __user *uc, struct pt_regs *regs)
 {
 	struct switch_stack *sw = (struct switch_stack *)regs - 1;
-	unsigned long *gregs = uc->uc_mcontext.gregs;
+	unsigned long __user *gregs = uc->uc_mcontext.gregs;
 	int err = 0;
 
 	err |= __put_user(MCONTEXT_VERSION, &uc->uc_mcontext.version);
@@ -162,8 +163,9 @@ static inline int rt_setup_ucontext(struct ucontext *uc, struct pt_regs *regs)
 	return err;
 }
 
-static inline void *get_sigframe(struct ksignal *ksig, struct pt_regs *regs,
-				 size_t frame_size)
+static inline void __user *get_sigframe(struct ksignal *ksig,
+					struct pt_regs *regs,
+					size_t frame_size)
 {
 	unsigned long usp;
 
@@ -174,13 +176,13 @@ static inline void *get_sigframe(struct ksignal *ksig, struct pt_regs *regs,
 	usp = sigsp(usp, ksig);
 
 	/* Verify, is it 32 or 64 bit aligned */
-	return (void *)((usp - frame_size) & -8UL);
+	return (void __user *)((usp - frame_size) & -8UL);
 }
 
 static int setup_rt_frame(struct ksignal *ksig, sigset_t *set,
 			  struct pt_regs *regs)
 {
-	struct rt_sigframe *frame;
+	struct rt_sigframe __user *frame;
 	int err = 0;
 
 	frame = get_sigframe(ksig, regs, sizeof(*frame));
diff --git a/arch/openrisc/Kconfig b/arch/openrisc/Kconfig
index f724b3f1aeed..0d68adf6e02b 100644
--- a/arch/openrisc/Kconfig
+++ b/arch/openrisc/Kconfig
@@ -36,7 +36,6 @@ config OPENRISC
 	select ARCH_WANT_FRAME_POINTERS
 	select GENERIC_IRQ_MULTI_HANDLER
 	select MMU_GATHER_NO_RANGE if MMU
-	select SET_FS
 	select TRACE_IRQFLAGS_SUPPORT
 
 config CPU_BIG_ENDIAN
diff --git a/arch/openrisc/include/asm/pgtable.h b/arch/openrisc/include/asm/pgtable.h
index cdd657f80bfa..c3abbf71e09f 100644
--- a/arch/openrisc/include/asm/pgtable.h
+++ b/arch/openrisc/include/asm/pgtable.h
@@ -361,6 +361,7 @@ static inline void pmd_set(pmd_t *pmdp, pte_t *ptep)
 	pmd_val(*pmdp) = _KERNPG_TABLE | (unsigned long) ptep;
 }
 
+#define pmd_pfn(pmd)		(pmd_val(pmd) >> PAGE_SHIFT)
 #define pmd_page(pmd)		(pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT))
 
 static inline unsigned long pmd_page_vaddr(pmd_t pmd)
diff --git a/arch/openrisc/include/asm/thread_info.h b/arch/openrisc/include/asm/thread_info.h
index 659834ab87fa..4af3049c34c2 100644
--- a/arch/openrisc/include/asm/thread_info.h
+++ b/arch/openrisc/include/asm/thread_info.h
@@ -40,18 +40,12 @@
  */
 #ifndef __ASSEMBLY__
 
-typedef unsigned long mm_segment_t;
-
 struct thread_info {
 	struct task_struct	*task;		/* main task structure */
 	unsigned long		flags;		/* low level flags */
 	__u32			cpu;		/* current CPU */
 	__s32			preempt_count; /* 0 => preemptable, <0 => BUG */
 
-	mm_segment_t		addr_limit; /* thread address space:
-					       0-0x7FFFFFFF for user-thead
-					       0-0xFFFFFFFF for kernel-thread
-					     */
 	__u8			supervisor_stack[0];
 
 	/* saved context data */
@@ -71,7 +65,6 @@ struct thread_info {
 	.flags		= 0,				\
 	.cpu		= 0,				\
 	.preempt_count	= INIT_PREEMPT_COUNT,		\
-	.addr_limit	= KERNEL_DS,			\
 	.ksp            = 0,                            \
 }
 
diff --git a/arch/openrisc/include/asm/uaccess.h b/arch/openrisc/include/asm/uaccess.h
index 120f5005461b..d6500a374e18 100644
--- a/arch/openrisc/include/asm/uaccess.h
+++ b/arch/openrisc/include/asm/uaccess.h
@@ -22,44 +22,7 @@
 #include <linux/string.h>
 #include <asm/page.h>
 #include <asm/extable.h>
-
-/*
- * The fs value determines whether argument validity checking should be
- * performed or not.  If get_fs() == USER_DS, checking is performed, with
- * get_fs() == KERNEL_DS, checking is bypassed.
- *
- * For historical reasons, these macros are grossly misnamed.
- */
-
-/* addr_limit is the maximum accessible address for the task. we misuse
- * the KERNEL_DS and USER_DS values to both assign and compare the
- * addr_limit values through the equally misnamed get/set_fs macros.
- * (see above)
- */
-
-#define KERNEL_DS	(~0UL)
-
-#define USER_DS		(TASK_SIZE)
-#define get_fs()	(current_thread_info()->addr_limit)
-#define set_fs(x)	(current_thread_info()->addr_limit = (x))
-
-#define uaccess_kernel()	(get_fs() == KERNEL_DS)
-
-/* Ensure that the range from addr to addr+size is all within the process'
- * address space
- */
-static inline int __range_ok(unsigned long addr, unsigned long size)
-{
-	const mm_segment_t fs = get_fs();
-
-	return size <= fs && addr <= (fs - size);
-}
-
-#define access_ok(addr, size)						\
-({ 									\
-	__chk_user_ptr(addr);						\
-	__range_ok((unsigned long)(addr), (size));			\
-})
+#include <asm-generic/access_ok.h>
 
 /*
  * These are the main single-value transfer routines.  They automatically
@@ -268,9 +231,6 @@ clear_user(void __user *addr, unsigned long size)
 	return size;
 }
 
-#define user_addr_max() \
-	(uaccess_kernel() ? ~0UL : TASK_SIZE)
-
 extern long strncpy_from_user(char *dest, const char __user *src, long count);
 
 extern __must_check long strnlen_user(const char __user *str, long n);
diff --git a/arch/openrisc/mm/init.c b/arch/openrisc/mm/init.c
index 97305bde1b16..3a021ab6f1ae 100644
--- a/arch/openrisc/mm/init.c
+++ b/arch/openrisc/mm/init.c
@@ -38,8 +38,6 @@
 
 int mem_init_done;
 
-DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
-
 static void __init zone_sizes_init(void)
 {
 	unsigned long max_zone_pfn[MAX_NR_ZONES] = { 0 };
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index 43c1c880def6..00cb889bd9a6 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -1,6 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 config PARISC
 	def_bool y
+	select ALTERNATE_USER_ADDRESS_SPACE
 	select ARCH_32BIT_OFF_T if !64BIT
 	select ARCH_MIGHT_HAVE_PC_PARPORT
 	select HAVE_FUNCTION_TRACER
@@ -10,10 +11,12 @@ config PARISC
 	select ARCH_HAS_ELF_RANDOMIZE
 	select ARCH_HAS_STRICT_KERNEL_RWX
 	select ARCH_HAS_UBSAN_SANITIZE_ALL
+	select ARCH_HAS_PTE_SPECIAL
 	select ARCH_NO_SG_CHAIN
 	select ARCH_SUPPORTS_HUGETLBFS if PA20
 	select ARCH_SUPPORTS_MEMORY_FAILURE
 	select ARCH_STACKWALK
+	select ARCH_HAS_DEBUG_VM_PGTABLE
 	select HAVE_RELIABLE_STACKTRACE
 	select DMA_OPS
 	select RTC_CLASS
@@ -259,18 +262,6 @@ config PARISC_PAGE_SIZE_64KB
 
 endchoice
 
-config PARISC_SELF_EXTRACT
-	bool "Build kernel as self-extracting executable"
-	default y
-	help
-	  Say Y if you want to build the parisc kernel as a kind of
-	  self-extracting executable.
-
-	  If you say N here, the kernel will be compressed with gzip
-	  which can be loaded by the palo bootloader directly too.
-
-	  If you don't know what to do here, say Y.
-
 config SMP
 	bool "Symmetric multi-processing support"
 	help
diff --git a/arch/parisc/Makefile b/arch/parisc/Makefile
index 82d77f4b0d08..2a9387a93592 100644
--- a/arch/parisc/Makefile
+++ b/arch/parisc/Makefile
@@ -15,12 +15,8 @@
 # Mike Shaver, Helge Deller and Martin K. Petersen
 #
 
-ifdef CONFIG_PARISC_SELF_EXTRACT
 boot := arch/parisc/boot
 KBUILD_IMAGE := $(boot)/bzImage
-else
-KBUILD_IMAGE := vmlinuz
-endif
 
 NM		= sh $(srctree)/arch/parisc/nm
 CHECKFLAGS	+= -D__hppa__=1
@@ -44,6 +40,16 @@ endif
 
 export LD_BFD
 
+# Set default 32 bits cross compilers for vdso
+CC_ARCHES_32 = hppa hppa2.0 hppa1.1
+CC_SUFFIXES  = linux linux-gnu unknown-linux-gnu
+CROSS32_COMPILE := $(call cc-cross-prefix, \
+	$(foreach a,$(CC_ARCHES_32), \
+	$(foreach s,$(CC_SUFFIXES),$(a)-$(s)-)))
+CROSS32CC := $(CROSS32_COMPILE)gcc
+export CROSS32CC
+
+# Set default cross compiler for kernel build
 ifdef cross_compiling
 	ifeq ($(CROSS_COMPILE),)
 		CC_SUFFIXES = linux linux-gnu unknown-linux-gnu
@@ -155,14 +161,29 @@ Image: vmlinux
 bzImage: vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
 
-ifdef CONFIG_PARISC_SELF_EXTRACT
 vmlinuz: bzImage
 	$(OBJCOPY) $(boot)/bzImage $@
-else
-vmlinuz: vmlinux
-	@$(KGZIP) -cf -9 $< > $@
+
+ifeq ($(KBUILD_EXTMOD),)
+# We need to generate vdso-offsets.h before compiling certain files in kernel/.
+# In order to do that, we should use the archprepare target, but we can't since
+# asm-offsets.h is included in some files used to generate vdso-offsets.h, and
+# asm-offsets.h is built in prepare0, for which archprepare is a dependency.
+# Therefore we need to generate the header after prepare0 has been made, hence
+# this hack.
+prepare: vdso_prepare
+vdso_prepare: prepare0
+	$(if $(CONFIG_64BIT),$(Q)$(MAKE) \
+		$(build)=arch/parisc/kernel/vdso64 include/generated/vdso64-offsets.h)
+	$(Q)$(MAKE) $(build)=arch/parisc/kernel/vdso32 include/generated/vdso32-offsets.h
 endif
 
+PHONY += vdso_install
+
+vdso_install:
+	$(Q)$(MAKE) $(build)=arch/parisc/kernel/vdso $@
+	$(if $(CONFIG_COMPAT_VDSO), \
+		$(Q)$(MAKE) $(build)=arch/parisc/kernel/vdso32 $@)
 install:
 	$(CONFIG_SHELL) $(srctree)/arch/parisc/install.sh \
 			$(KERNELRELEASE) vmlinux System.map "$(INSTALL_PATH)"
diff --git a/arch/parisc/configs/generic-32bit_defconfig b/arch/parisc/configs/generic-32bit_defconfig
index 53061cb2cf7f..a5fee10d76ee 100644
--- a/arch/parisc/configs/generic-32bit_defconfig
+++ b/arch/parisc/configs/generic-32bit_defconfig
@@ -210,7 +210,6 @@ CONFIG_TMPFS_XATTR=y
 CONFIG_NFS_FS=m
 # CONFIG_NFS_V2 is not set
 CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
 CONFIG_CIFS=m
 CONFIG_CIFS_XATTR=y
 CONFIG_CIFS_POSIX=y
diff --git a/arch/parisc/include/asm/agp.h b/arch/parisc/include/asm/agp.h
index cb04470e63d0..14ae54cfd368 100644
--- a/arch/parisc/include/asm/agp.h
+++ b/arch/parisc/include/asm/agp.h
@@ -8,8 +8,8 @@
  *
  */
 
-#define map_page_into_agp(page)		/* nothing */
-#define unmap_page_from_agp(page)	/* nothing */
+#define map_page_into_agp(page)		do { } while (0)
+#define unmap_page_from_agp(page)	do { } while (0)
 #define flush_agp_cache()		mb()
 
 /* GATT allocation. Returns/accepts GATT kernel virtual address. */
diff --git a/arch/parisc/include/asm/assembly.h b/arch/parisc/include/asm/assembly.h
index 6369082c6c74..ea0cb318b13d 100644
--- a/arch/parisc/include/asm/assembly.h
+++ b/arch/parisc/include/asm/assembly.h
@@ -47,6 +47,12 @@
 #define PRIV_USER	3
 #define PRIV_KERNEL	0
 
+/* Space register used inside kernel */
+#define SR_KERNEL	0
+#define SR_TEMP1	1
+#define SR_TEMP2	2
+#define SR_USER		3
+
 #ifdef __ASSEMBLY__
 
 #ifdef CONFIG_64BIT
diff --git a/arch/parisc/include/asm/bitops.h b/arch/parisc/include/asm/bitops.h
index 0ec9cfc5131f..56ffd260c669 100644
--- a/arch/parisc/include/asm/bitops.h
+++ b/arch/parisc/include/asm/bitops.h
@@ -12,6 +12,14 @@
 #include <asm/barrier.h>
 #include <linux/atomic.h>
 
+/* compiler build environment sanity checks: */
+#if !defined(CONFIG_64BIT) && defined(__LP64__)
+#error "Please use 'ARCH=parisc' to build the 32-bit kernel."
+#endif
+#if defined(CONFIG_64BIT) && !defined(__LP64__)
+#error "Please use 'ARCH=parisc64' to build the 64-bit kernel."
+#endif
+
 /* See http://marc.theaimsgroup.com/?t=108826637900003 for discussion
  * on use of volatile and __*_bit() (set/clear/change):
  *	*_bit() want use of volatile.
diff --git a/arch/parisc/include/asm/cache.h b/arch/parisc/include/asm/cache.h
index d53e9e27dba0..5032e758594e 100644
--- a/arch/parisc/include/asm/cache.h
+++ b/arch/parisc/include/asm/cache.h
@@ -39,16 +39,13 @@ extern int icache_stride;
 extern struct pdc_cache_info cache_info;
 void parisc_setup_cache_timing(void);
 
-#define pdtlb(addr)	asm volatile("pdtlb 0(%%sr1,%0)" \
+#define pdtlb(sr, addr)	asm volatile("pdtlb 0(%%sr%0,%1)" \
 			ALTERNATIVE(ALT_COND_NO_SMP, INSN_PxTLB) \
-			: : "r" (addr) : "memory")
-#define pitlb(addr)	asm volatile("pitlb 0(%%sr1,%0)" \
+			: : "i"(sr), "r" (addr) : "memory")
+#define pitlb(sr, addr)	asm volatile("pitlb 0(%%sr%0,%1)" \
 			ALTERNATIVE(ALT_COND_NO_SMP, INSN_PxTLB) \
 			ALTERNATIVE(ALT_COND_NO_SPLIT_TLB, INSN_NOP) \
-			: : "r" (addr) : "memory")
-#define pdtlb_kernel(addr)  asm volatile("pdtlb 0(%0)"   \
-			ALTERNATIVE(ALT_COND_NO_SMP, INSN_PxTLB) \
-			: : "r" (addr) : "memory")
+			: : "i"(sr), "r" (addr) : "memory")
 
 #define asm_io_fdc(addr) asm volatile("fdc %%r0(%0)" \
 			ALTERNATIVE(ALT_COND_NO_DCACHE, INSN_NOP) \
diff --git a/arch/parisc/include/asm/cacheflush.h b/arch/parisc/include/asm/cacheflush.h
index 859b8a34adcf..e8b4a03343d3 100644
--- a/arch/parisc/include/asm/cacheflush.h
+++ b/arch/parisc/include/asm/cacheflush.h
@@ -9,16 +9,11 @@
 /* The usual comment is "Caches aren't brain-dead on the <architecture>".
  * Unfortunately, that doesn't apply to PA-RISC. */
 
-/* Internal implementation */
-void flush_data_cache_local(void *);  /* flushes local data-cache only */
-void flush_instruction_cache_local(void *); /* flushes local code-cache only */
-#ifdef CONFIG_SMP
-void flush_data_cache(void); /* flushes data-cache only (all processors) */
-void flush_instruction_cache(void); /* flushes i-cache only (all processors) */
-#else
-#define flush_data_cache() flush_data_cache_local(NULL)
-#define flush_instruction_cache() flush_instruction_cache_local(NULL)
-#endif
+#include <linux/jump_label.h>
+
+DECLARE_STATIC_KEY_TRUE(parisc_has_cache);
+DECLARE_STATIC_KEY_TRUE(parisc_has_dcache);
+DECLARE_STATIC_KEY_TRUE(parisc_has_icache);
 
 #define flush_cache_dup_mm(mm) flush_cache_mm(mm)
 
diff --git a/arch/parisc/include/asm/current.h b/arch/parisc/include/asm/current.h
index 568b739e42af..dc7aea07c3f3 100644
--- a/arch/parisc/include/asm/current.h
+++ b/arch/parisc/include/asm/current.h
@@ -2,14 +2,16 @@
 #ifndef _ASM_PARISC_CURRENT_H
 #define _ASM_PARISC_CURRENT_H
 
-#include <asm/special_insns.h>
-
 #ifndef __ASSEMBLY__
 struct task_struct;
 
 static __always_inline struct task_struct *get_current(void)
 {
-	return (struct task_struct *) mfctl(30);
+	struct task_struct *ts;
+
+	/* do not use mfctl() macro as it is marked volatile */
+	asm( "mfctl %%cr30,%0" : "=r" (ts) );
+	return ts;
 }
 
 #define current get_current()
diff --git a/arch/parisc/include/asm/elf.h b/arch/parisc/include/asm/elf.h
index 3bd465a27791..cc426d365892 100644
--- a/arch/parisc/include/asm/elf.h
+++ b/arch/parisc/include/asm/elf.h
@@ -359,4 +359,19 @@ struct mm_struct;
 extern unsigned long arch_randomize_brk(struct mm_struct *);
 #define arch_randomize_brk arch_randomize_brk
 
+
+#define ARCH_HAS_SETUP_ADDITIONAL_PAGES 1
+struct linux_binprm;
+extern int arch_setup_additional_pages(struct linux_binprm *bprm,
+					int executable_stack);
+#define VDSO_AUX_ENT(a, b) NEW_AUX_ENT(a, b)
+#define VDSO_CURRENT_BASE current->mm->context.vdso_base
+
+#define ARCH_DLINFO						\
+do {								\
+	if (VDSO_CURRENT_BASE) {				\
+		NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_CURRENT_BASE);\
+	}							\
+} while (0)
+
 #endif
diff --git a/arch/parisc/include/asm/futex.h b/arch/parisc/include/asm/futex.h
index b5835325d44b..3222206cb3ea 100644
--- a/arch/parisc/include/asm/futex.h
+++ b/arch/parisc/include/asm/futex.h
@@ -96,12 +96,6 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 	u32 val;
 	unsigned long flags;
 
-	/* futex.c wants to do a cmpxchg_inatomic on kernel NULL, which is
-	 * our gateway page, and causes no end of trouble...
-	 */
-	if (uaccess_kernel() && !uaddr)
-		return -EFAULT;
-
 	if (!access_ok(uaddr, sizeof(u32)))
 		return -EFAULT;
 
diff --git a/arch/parisc/include/asm/kprobes.h b/arch/parisc/include/asm/kprobes.h
index 904034da4974..0a175ac87698 100644
--- a/arch/parisc/include/asm/kprobes.h
+++ b/arch/parisc/include/asm/kprobes.h
@@ -18,8 +18,9 @@
 #include <linux/notifier.h>
 
 #define PARISC_KPROBES_BREAK_INSN	0x3ff801f
+#define PARISC_KPROBES_BREAK_INSN2	0x3ff801e
 #define  __ARCH_WANT_KPROBES_INSN_SLOT
-#define MAX_INSN_SIZE 1
+#define MAX_INSN_SIZE 2
 
 typedef u32 kprobe_opcode_t;
 struct kprobe;
@@ -29,7 +30,7 @@ void arch_remove_kprobe(struct kprobe *p);
 #define flush_insn_slot(p) \
 	flush_icache_range((unsigned long)&(p)->ainsn.insn[0], \
 			   (unsigned long)&(p)->ainsn.insn[0] + \
-			   sizeof(kprobe_opcode_t))
+			   MAX_INSN_SIZE*sizeof(kprobe_opcode_t))
 
 #define kretprobe_blacklist_size    0
 
diff --git a/arch/parisc/include/asm/mmu.h b/arch/parisc/include/asm/mmu.h
index 3fb70a601d5c..44fd062b62ed 100644
--- a/arch/parisc/include/asm/mmu.h
+++ b/arch/parisc/include/asm/mmu.h
@@ -2,7 +2,9 @@
 #ifndef _PARISC_MMU_H_
 #define _PARISC_MMU_H_
 
-/* On parisc, we store the space id here */
-typedef unsigned long mm_context_t;
+typedef struct {
+	unsigned long space_id;
+	unsigned long vdso_base;
+} mm_context_t;
 
 #endif /* _PARISC_MMU_H_ */
diff --git a/arch/parisc/include/asm/mmu_context.h b/arch/parisc/include/asm/mmu_context.h
index 726257648d9f..c9187fe836a3 100644
--- a/arch/parisc/include/asm/mmu_context.h
+++ b/arch/parisc/include/asm/mmu_context.h
@@ -20,7 +20,7 @@ init_new_context(struct task_struct *tsk, struct mm_struct *mm)
 {
 	BUG_ON(atomic_read(&mm->mm_users) != 1);
 
-	mm->context = alloc_sid();
+	mm->context.space_id = alloc_sid();
 	return 0;
 }
 
@@ -28,22 +28,22 @@ init_new_context(struct task_struct *tsk, struct mm_struct *mm)
 static inline void
 destroy_context(struct mm_struct *mm)
 {
-	free_sid(mm->context);
-	mm->context = 0;
+	free_sid(mm->context.space_id);
+	mm->context.space_id = 0;
 }
 
 static inline unsigned long __space_to_prot(mm_context_t context)
 {
 #if SPACEID_SHIFT == 0
-	return context << 1;
+	return context.space_id << 1;
 #else
-	return context >> (SPACEID_SHIFT - 1);
+	return context.space_id >> (SPACEID_SHIFT - 1);
 #endif
 }
 
 static inline void load_context(mm_context_t context)
 {
-	mtsp(context, 3);
+	mtsp(context.space_id, SR_USER);
 	mtctl(__space_to_prot(context), 8);
 }
 
@@ -89,8 +89,8 @@ static inline void activate_mm(struct mm_struct *prev, struct mm_struct *next)
 
 	BUG_ON(next == &init_mm); /* Should never happen */
 
-	if (next->context == 0)
-	    next->context = alloc_sid();
+	if (next->context.space_id == 0)
+		next->context.space_id = alloc_sid();
 
 	switch_mm(prev,next,current);
 }
diff --git a/arch/parisc/include/asm/pgtable.h b/arch/parisc/include/asm/pgtable.h
index 3e7cf882639f..939db6fe620b 100644
--- a/arch/parisc/include/asm/pgtable.h
+++ b/arch/parisc/include/asm/pgtable.h
@@ -70,9 +70,9 @@ static inline void purge_tlb_entries(struct mm_struct *mm, unsigned long addr)
 	unsigned long flags;
 
 	purge_tlb_start(flags);
-	mtsp(mm->context, 1);
-	pdtlb(addr);
-	pitlb(addr);
+	mtsp(mm->context.space_id, SR_TEMP1);
+	pdtlb(SR_TEMP1, addr);
+	pitlb(SR_TEMP1, addr);
 	purge_tlb_end(flags);
 }
 
@@ -219,9 +219,10 @@ extern void __update_cache(pte_t pte);
 #define _PAGE_PRESENT  (1 << xlate_pabit(_PAGE_PRESENT_BIT))
 #define _PAGE_HUGE     (1 << xlate_pabit(_PAGE_HPAGE_BIT))
 #define _PAGE_USER     (1 << xlate_pabit(_PAGE_USER_BIT))
+#define _PAGE_SPECIAL  (_PAGE_DMB)
 
 #define _PAGE_TABLE	(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | _PAGE_DIRTY | _PAGE_ACCESSED)
-#define _PAGE_CHG_MASK	(PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
+#define _PAGE_CHG_MASK	(PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_SPECIAL)
 #define _PAGE_KERNEL_RO	(_PAGE_PRESENT | _PAGE_READ | _PAGE_DIRTY | _PAGE_ACCESSED)
 #define _PAGE_KERNEL_EXEC	(_PAGE_KERNEL_RO | _PAGE_EXEC)
 #define _PAGE_KERNEL_RWX	(_PAGE_KERNEL_EXEC | _PAGE_WRITE)
@@ -348,6 +349,7 @@ static inline void pud_clear(pud_t *pud) {
 static inline int pte_dirty(pte_t pte)		{ return pte_val(pte) & _PAGE_DIRTY; }
 static inline int pte_young(pte_t pte)		{ return pte_val(pte) & _PAGE_ACCESSED; }
 static inline int pte_write(pte_t pte)		{ return pte_val(pte) & _PAGE_WRITE; }
+static inline int pte_special(pte_t pte)	{ return pte_val(pte) & _PAGE_SPECIAL; }
 
 static inline pte_t pte_mkclean(pte_t pte)	{ pte_val(pte) &= ~_PAGE_DIRTY; return pte; }
 static inline pte_t pte_mkold(pte_t pte)	{ pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
@@ -355,6 +357,7 @@ static inline pte_t pte_wrprotect(pte_t pte)	{ pte_val(pte) &= ~_PAGE_WRITE; ret
 static inline pte_t pte_mkdirty(pte_t pte)	{ pte_val(pte) |= _PAGE_DIRTY; return pte; }
 static inline pte_t pte_mkyoung(pte_t pte)	{ pte_val(pte) |= _PAGE_ACCESSED; return pte; }
 static inline pte_t pte_mkwrite(pte_t pte)	{ pte_val(pte) |= _PAGE_WRITE; return pte; }
+static inline pte_t pte_mkspecial(pte_t pte)	{ pte_val(pte) |= _PAGE_SPECIAL; return pte; }
 
 /*
  * Huge pte definitions.
@@ -405,6 +408,7 @@ static inline unsigned long pmd_page_vaddr(pmd_t pmd)
 	return ((unsigned long) __va(pmd_address(pmd)));
 }
 
+#define pmd_pfn(pmd)	(pmd_address(pmd) >> PAGE_SHIFT)
 #define __pmd_page(pmd) ((unsigned long) __va(pmd_address(pmd)))
 #define pmd_page(pmd)	virt_to_page((void *)__pmd_page(pmd))
 
diff --git a/arch/parisc/include/asm/processor.h b/arch/parisc/include/asm/processor.h
index 3a3d05438408..006364212795 100644
--- a/arch/parisc/include/asm/processor.h
+++ b/arch/parisc/include/asm/processor.h
@@ -236,7 +236,7 @@ on downward growing arches, it looks like this:
 
 #define start_thread(regs, new_pc, new_sp) do {		\
 	elf_addr_t *sp = (elf_addr_t *)new_sp;		\
-	__u32 spaceid = (__u32)current->mm->context;	\
+	__u32 spaceid = (__u32)current->mm->context.space_id;	\
 	elf_addr_t pc = (elf_addr_t)new_pc | 3;		\
 	elf_caddr_t *argv = (elf_caddr_t *)bprm->exec + 1;	\
 							\
diff --git a/arch/parisc/include/asm/rt_sigframe.h b/arch/parisc/include/asm/rt_sigframe.h
index 2b3010ade00e..bb7fb4153327 100644
--- a/arch/parisc/include/asm/rt_sigframe.h
+++ b/arch/parisc/include/asm/rt_sigframe.h
@@ -2,16 +2,8 @@
 #ifndef _ASM_PARISC_RT_SIGFRAME_H
 #define _ASM_PARISC_RT_SIGFRAME_H
 
-#define SIGRETURN_TRAMP 4
-#define SIGRESTARTBLOCK_TRAMP 5 
-#define TRAMP_SIZE (SIGRETURN_TRAMP + SIGRESTARTBLOCK_TRAMP)
-
 struct rt_sigframe {
-	/* XXX: Must match trampoline size in arch/parisc/kernel/signal.c 
-	        Secondary to that it must protect the ERESTART_RESTARTBLOCK
-		trampoline we left on the stack (we were bad and didn't 
-		change sp so we could run really fast.) */
-	unsigned int tramp[TRAMP_SIZE];
+	unsigned int tramp[2]; /* holds original return address */
 	struct siginfo info;
 	struct ucontext uc;
 };
diff --git a/arch/parisc/include/asm/special_insns.h b/arch/parisc/include/asm/special_insns.h
index 16ee41e77174..41b3ddbd344c 100644
--- a/arch/parisc/include/asm/special_insns.h
+++ b/arch/parisc/include/asm/special_insns.h
@@ -55,8 +55,8 @@ static inline void set_eiem(unsigned long val)
 #define mfsp(reg)	({		\
 	unsigned long cr;		\
 	__asm__ __volatile__(		\
-		"mfsp " #reg ",%0" :	\
-		 "=r" (cr)		\
+		"mfsp %%sr%1,%0"	\
+		: "=r" (cr) : "i"(reg)	\
 	);				\
 	cr;				\
 })
diff --git a/arch/parisc/include/asm/tlbflush.h b/arch/parisc/include/asm/tlbflush.h
index c5ded01d45be..5ffd7c17f593 100644
--- a/arch/parisc/include/asm/tlbflush.h
+++ b/arch/parisc/include/asm/tlbflush.h
@@ -17,7 +17,7 @@ int __flush_tlb_range(unsigned long sid,
 	unsigned long start, unsigned long end);
 
 #define flush_tlb_range(vma, start, end) \
-	__flush_tlb_range((vma)->vm_mm->context, start, end)
+	__flush_tlb_range((vma)->vm_mm->context.space_id, start, end)
 
 #define flush_tlb_kernel_range(start, end) \
 	__flush_tlb_range(0, start, end)
diff --git a/arch/parisc/include/asm/traps.h b/arch/parisc/include/asm/traps.h
index 34619f010c63..0ccdb738a9a3 100644
--- a/arch/parisc/include/asm/traps.h
+++ b/arch/parisc/include/asm/traps.h
@@ -18,6 +18,7 @@ unsigned long parisc_acctyp(unsigned long code, unsigned int inst);
 const char *trap_name(unsigned long code);
 void do_page_fault(struct pt_regs *regs, unsigned long code,
 		unsigned long address);
+int handle_nadtlb_fault(struct pt_regs *regs);
 #endif
 
 #endif
diff --git a/arch/parisc/include/asm/uaccess.h b/arch/parisc/include/asm/uaccess.h
index ebf8a845b017..2bf660eabe42 100644
--- a/arch/parisc/include/asm/uaccess.h
+++ b/arch/parisc/include/asm/uaccess.h
@@ -11,15 +11,9 @@
 #include <linux/bug.h>
 #include <linux/string.h>
 
-/*
- * Note that since kernel addresses are in a separate address space on
- * parisc, we don't need to do anything for access_ok().
- * We just let the page fault handler do the right thing. This also means
- * that put_user is the same as __put_user, etc.
- */
-
-#define access_ok(uaddr, size)	\
-	( (uaddr) == (uaddr) )
+#define TASK_SIZE_MAX DEFAULT_TASK_SIZE
+#include <asm/pgtable.h>
+#include <asm-generic/access_ok.h>
 
 #define put_user __put_user
 #define get_user __get_user
@@ -79,28 +73,27 @@ struct exception_table_entry {
 
 #define __get_user(val, ptr)				\
 ({							\
-	__get_user_internal("%%sr3,", val, ptr);	\
+	__get_user_internal(SR_USER, val, ptr);	\
 })
 
 #define __get_user_asm(sr, val, ldx, ptr)		\
 {							\
 	register long __gu_val;				\
 							\
-	__asm__("1: " ldx " 0(" sr "%2),%0\n"		\
+	__asm__("1: " ldx " 0(%%sr%2,%3),%0\n"		\
 		"9:\n"					\
 		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b)	\
-		: "=r"(__gu_val), "=r"(__gu_err)        \
-		: "r"(ptr), "1"(__gu_err));		\
+		: "=r"(__gu_val), "+r"(__gu_err)        \
+		: "i"(sr), "r"(ptr));			\
 							\
 	(val) = (__force __typeof__(*(ptr))) __gu_val;	\
 }
 
-#define HAVE_GET_KERNEL_NOFAULT
 #define __get_kernel_nofault(dst, src, type, err_label)	\
 {							\
 	type __z;					\
 	long __err;					\
-	__err = __get_user_internal("%%sr0,", __z, (type *)(src)); \
+	__err = __get_user_internal(SR_KERNEL, __z, (type *)(src)); \
 	if (unlikely(__err))				\
 		goto err_label;				\
 	else						\
@@ -118,13 +111,13 @@ struct exception_table_entry {
 	} __gu_tmp;					\
 							\
 	__asm__("   copy %%r0,%R0\n"			\
-		"1: ldw 0(" sr "%2),%0\n"		\
-		"2: ldw 4(" sr "%2),%R0\n"		\
+		"1: ldw 0(%%sr%2,%3),%0\n"		\
+		"2: ldw 4(%%sr%2,%3),%R0\n"		\
 		"9:\n"					\
 		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b)	\
 		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 9b)	\
-		: "=&r"(__gu_tmp.l), "=r"(__gu_err)	\
-		: "r"(ptr), "1"(__gu_err));		\
+		: "=&r"(__gu_tmp.l), "+r"(__gu_err)	\
+		: "i"(sr), "r"(ptr));			\
 							\
 	(val) = __gu_tmp.t;				\
 }
@@ -135,13 +128,12 @@ struct exception_table_entry {
 #define __put_user_internal(sr, x, ptr)				\
 ({								\
 	ASM_EXCEPTIONTABLE_VAR(__pu_err);		      	\
-        __typeof__(*(ptr)) __x = (__typeof__(*(ptr)))(x);	\
 								\
 	switch (sizeof(*(ptr))) {				\
-	case 1: __put_user_asm(sr, "stb", __x, ptr); break;	\
-	case 2: __put_user_asm(sr, "sth", __x, ptr); break;	\
-	case 4: __put_user_asm(sr, "stw", __x, ptr); break;	\
-	case 8: STD_USER(sr, __x, ptr); break;			\
+	case 1: __put_user_asm(sr, "stb", x, ptr); break;	\
+	case 2: __put_user_asm(sr, "sth", x, ptr); break;	\
+	case 4: __put_user_asm(sr, "stw", x, ptr); break;	\
+	case 8: STD_USER(sr, x, ptr); break;			\
 	default: BUILD_BUG();					\
 	}							\
 								\
@@ -150,14 +142,16 @@ struct exception_table_entry {
 
 #define __put_user(x, ptr)					\
 ({								\
-	__put_user_internal("%%sr3,", x, ptr);			\
+	__typeof__(&*(ptr)) __ptr = ptr;			\
+	__typeof__(*(__ptr)) __x = (__typeof__(*(__ptr)))(x);	\
+	__put_user_internal(SR_USER, __x, __ptr);		\
 })
 
 #define __put_kernel_nofault(dst, src, type, err_label)		\
 {								\
 	type __z = *(type *)(src);				\
 	long __err;						\
-	__err = __put_user_internal("%%sr0,", __z, (type *)(dst)); \
+	__err = __put_user_internal(SR_KERNEL, __z, (type *)(dst)); \
 	if (unlikely(__err))					\
 		goto err_label;					\
 }
@@ -177,24 +171,24 @@ struct exception_table_entry {
 
 #define __put_user_asm(sr, stx, x, ptr)				\
 	__asm__ __volatile__ (					\
-		"1: " stx " %2,0(" sr "%1)\n"			\
+		"1: " stx " %1,0(%%sr%2,%3)\n"			\
 		"9:\n"						\
 		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b)		\
-		: "=r"(__pu_err)				\
-		: "r"(ptr), "r"(x), "0"(__pu_err))
+		: "+r"(__pu_err)				\
+		: "r"(x), "i"(sr), "r"(ptr))
 
 
 #if !defined(CONFIG_64BIT)
 
 #define __put_user_asm64(sr, __val, ptr) do {			\
 	__asm__ __volatile__ (					\
-		"1: stw %2,0(" sr "%1)\n"			\
-		"2: stw %R2,4(" sr "%1)\n"			\
+		"1: stw %1,0(%%sr%2,%3)\n"			\
+		"2: stw %R1,4(%%sr%2,%3)\n"			\
 		"9:\n"						\
 		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b)		\
 		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 9b)		\
-		: "=r"(__pu_err)				\
-		: "r"(ptr), "r"(__val), "0"(__pu_err));		\
+		: "+r"(__pu_err)				\
+		: "r"(__val), "i"(sr), "r"(ptr));		\
 } while (0)
 
 #endif /* !defined(CONFIG_64BIT) */
diff --git a/arch/parisc/include/asm/unistd.h b/arch/parisc/include/asm/unistd.h
index cd438e4150f6..7708a5806f09 100644
--- a/arch/parisc/include/asm/unistd.h
+++ b/arch/parisc/include/asm/unistd.h
@@ -63,10 +63,6 @@
 		);							\
 		__sys_res = (long)__res;				\
 	}								\
-	if ( (unsigned long)__sys_res >= (unsigned long)-4095 ){	\
-		errno = -__sys_res;		        		\
-		__sys_res = -1;						\
-	}								\
 	__sys_res;							\
 })
 
diff --git a/arch/parisc/include/asm/vdso.h b/arch/parisc/include/asm/vdso.h
new file mode 100644
index 000000000000..ef8206193f82
--- /dev/null
+++ b/arch/parisc/include/asm/vdso.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __PARISC_VDSO_H__
+#define __PARISC_VDSO_H__
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_64BIT
+#include <generated/vdso64-offsets.h>
+#endif
+#include <generated/vdso32-offsets.h>
+
+#define VDSO64_SYMBOL(tsk, name) ((tsk)->mm->context.vdso_base + (vdso64_offset_##name))
+#define VDSO32_SYMBOL(tsk, name) ((tsk)->mm->context.vdso_base + (vdso32_offset_##name))
+
+extern struct vdso_data *vdso_data;
+
+#endif /* __ASSEMBLY __ */
+
+/* Default link addresses for the vDSOs */
+#define VDSO_LBASE	0
+
+#define VDSO_VERSION_STRING	LINUX_5.18
+
+#endif /* __PARISC_VDSO_H__ */
diff --git a/arch/parisc/include/uapi/asm/auxvec.h b/arch/parisc/include/uapi/asm/auxvec.h
new file mode 100644
index 000000000000..90d2aa699cf3
--- /dev/null
+++ b/arch/parisc/include/uapi/asm/auxvec.h
@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI_PARISC_AUXVEC_H
+#define _UAPI_PARISC_AUXVEC_H
+
+/* The vDSO location. */
+#define AT_SYSINFO_EHDR		33
+
+#endif /* _UAPI_PARISC_AUXVEC_H */
diff --git a/arch/parisc/include/uapi/asm/shmbuf.h b/arch/parisc/include/uapi/asm/shmbuf.h
index 5da3089be65e..532da742fb56 100644
--- a/arch/parisc/include/uapi/asm/shmbuf.h
+++ b/arch/parisc/include/uapi/asm/shmbuf.h
@@ -3,6 +3,8 @@
 #define _PARISC_SHMBUF_H
 
 #include <asm/bitsperlong.h>
+#include <asm/ipcbuf.h>
+#include <asm/posix_types.h>
 
 /* 
  * The shmid64_ds structure for parisc architecture.
diff --git a/arch/parisc/include/uapi/asm/signal.h b/arch/parisc/include/uapi/asm/signal.h
index e5a2657477ac..8e4895c5ea5d 100644
--- a/arch/parisc/include/uapi/asm/signal.h
+++ b/arch/parisc/include/uapi/asm/signal.h
@@ -67,7 +67,7 @@ struct siginfo;
 typedef struct sigaltstack {
 	void __user *ss_sp;
 	int ss_flags;
-	size_t ss_size;
+	__kernel_size_t ss_size;
 } stack_t;
 
 #endif /* !__ASSEMBLY */
diff --git a/arch/parisc/kernel/Makefile b/arch/parisc/kernel/Makefile
index 8fb819bbbb17..d579243edc2f 100644
--- a/arch/parisc/kernel/Makefile
+++ b/arch/parisc/kernel/Makefile
@@ -39,3 +39,8 @@ obj-$(CONFIG_KGDB)			+= kgdb.o
 obj-$(CONFIG_KPROBES)			+= kprobes.o
 obj-$(CONFIG_KEXEC_CORE)		+= kexec.o relocate_kernel.o
 obj-$(CONFIG_KEXEC_FILE)		+= kexec_file.o
+
+# vdso
+obj-y			+= vdso.o
+obj-$(CONFIG_64BIT)	+= vdso64/
+obj-y			+= vdso32/
diff --git a/arch/parisc/kernel/alternative.c b/arch/parisc/kernel/alternative.c
index fa28c4c9f972..daa1e9047275 100644
--- a/arch/parisc/kernel/alternative.c
+++ b/arch/parisc/kernel/alternative.c
@@ -8,6 +8,7 @@
 #include <asm/processor.h>
 #include <asm/sections.h>
 #include <asm/alternative.h>
+#include <asm/cacheflush.h>
 
 #include <linux/module.h>
 
@@ -107,5 +108,14 @@ void __init apply_alternatives_all(void)
 	apply_alternatives((struct alt_instr *) &__alt_instructions,
 		(struct alt_instr *) &__alt_instructions_end, NULL);
 
+	if (cache_info.dc_size == 0 && cache_info.ic_size == 0) {
+		pr_info("alternatives: optimizing cache-flushes.\n");
+		static_branch_disable(&parisc_has_cache);
+	}
+	if (cache_info.dc_size == 0)
+		static_branch_disable(&parisc_has_dcache);
+	if (cache_info.ic_size == 0)
+		static_branch_disable(&parisc_has_icache);
+
 	set_kernel_text_rw(0);
 }
diff --git a/arch/parisc/kernel/asm-offsets.c b/arch/parisc/kernel/asm-offsets.c
index 2a83ef36d216..2673d57eeb00 100644
--- a/arch/parisc/kernel/asm-offsets.c
+++ b/arch/parisc/kernel/asm-offsets.c
@@ -26,7 +26,11 @@
 #include <asm/ptrace.h>
 #include <asm/processor.h>
 #include <asm/pdc.h>
+#include <uapi/asm/sigcontext.h>
+#include <asm/ucontext.h>
+#include <asm/rt_sigframe.h>
 #include <linux/uaccess.h>
+#include "signal32.h"
 
 /* Add FRAME_SIZE to the size x and align it to y. All definitions
  * that use align_frame will include space for a frame.
@@ -218,6 +222,11 @@ int main(void)
 	DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
 	DEFINE(TI_PRE_COUNT, offsetof(struct task_struct, thread_info.preempt_count));
 	BLANK();
+	DEFINE(ASM_SIGFRAME_SIZE, PARISC_RT_SIGFRAME_SIZE);
+	DEFINE(SIGFRAME_CONTEXT_REGS, offsetof(struct rt_sigframe, uc.uc_mcontext) - PARISC_RT_SIGFRAME_SIZE);
+	DEFINE(ASM_SIGFRAME_SIZE32, PARISC_RT_SIGFRAME_SIZE32);
+	DEFINE(SIGFRAME_CONTEXT_REGS32, offsetof(struct compat_rt_sigframe, uc.uc_mcontext) - PARISC_RT_SIGFRAME_SIZE32);
+	BLANK();
 	DEFINE(ICACHE_BASE, offsetof(struct pdc_cache_info, ic_base));
 	DEFINE(ICACHE_STRIDE, offsetof(struct pdc_cache_info, ic_stride));
 	DEFINE(ICACHE_COUNT, offsetof(struct pdc_cache_info, ic_count));
diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c
index 94150b91c96f..456e879d34a8 100644
--- a/arch/parisc/kernel/cache.c
+++ b/arch/parisc/kernel/cache.c
@@ -38,6 +38,9 @@ EXPORT_SYMBOL(flush_dcache_page_asm);
 void purge_dcache_page_asm(unsigned long phys_addr, unsigned long vaddr);
 void flush_icache_page_asm(unsigned long phys_addr, unsigned long vaddr);
 
+/* Internal implementation in arch/parisc/kernel/pacache.S */
+void flush_data_cache_local(void *);  /* flushes local data-cache only */
+void flush_instruction_cache_local(void); /* flushes local code-cache only */
 
 /* On some machines (i.e., ones with the Merced bus), there can be
  * only a single PxTLB broadcast at a time; this must be guaranteed
@@ -58,26 +61,35 @@ struct pdc_cache_info cache_info __ro_after_init;
 static struct pdc_btlb_info btlb_info __ro_after_init;
 #endif
 
-#ifdef CONFIG_SMP
-void
-flush_data_cache(void)
+DEFINE_STATIC_KEY_TRUE(parisc_has_cache);
+DEFINE_STATIC_KEY_TRUE(parisc_has_dcache);
+DEFINE_STATIC_KEY_TRUE(parisc_has_icache);
+
+static void cache_flush_local_cpu(void *dummy)
 {
-	on_each_cpu(flush_data_cache_local, NULL, 1);
+	if (static_branch_likely(&parisc_has_icache))
+		flush_instruction_cache_local();
+	if (static_branch_likely(&parisc_has_dcache))
+		flush_data_cache_local(NULL);
 }
-void 
-flush_instruction_cache(void)
+
+void flush_cache_all_local(void)
 {
-	on_each_cpu(flush_instruction_cache_local, NULL, 1);
+	cache_flush_local_cpu(NULL);
 }
-#endif
 
-void
-flush_cache_all_local(void)
+void flush_cache_all(void)
 {
-	flush_instruction_cache_local(NULL);
-	flush_data_cache_local(NULL);
+	if (static_branch_likely(&parisc_has_cache))
+		on_each_cpu(cache_flush_local_cpu, NULL, 1);
 }
-EXPORT_SYMBOL(flush_cache_all_local);
+
+static inline void flush_data_cache(void)
+{
+	if (static_branch_likely(&parisc_has_dcache))
+		on_each_cpu(flush_data_cache_local, NULL, 1);
+}
+
 
 /* Virtual address of pfn.  */
 #define pfn_va(pfn)	__va(PFN_PHYS(pfn))
@@ -303,6 +315,8 @@ static inline void
 __flush_cache_page(struct vm_area_struct *vma, unsigned long vmaddr,
 		   unsigned long physaddr)
 {
+	if (!static_branch_likely(&parisc_has_cache))
+		return;
 	preempt_disable();
 	flush_dcache_page_asm(physaddr, vmaddr);
 	if (vma->vm_flags & VM_EXEC)
@@ -314,6 +328,8 @@ static inline void
 __purge_cache_page(struct vm_area_struct *vma, unsigned long vmaddr,
 		   unsigned long physaddr)
 {
+	if (!static_branch_likely(&parisc_has_cache))
+		return;
 	preempt_disable();
 	purge_dcache_page_asm(physaddr, vmaddr);
 	if (vma->vm_flags & VM_EXEC)
@@ -375,7 +391,6 @@ EXPORT_SYMBOL(flush_dcache_page);
 
 /* Defined in arch/parisc/kernel/pacache.S */
 EXPORT_SYMBOL(flush_kernel_dcache_range_asm);
-EXPORT_SYMBOL(flush_data_cache_local);
 EXPORT_SYMBOL(flush_kernel_icache_range_asm);
 
 #define FLUSH_THRESHOLD 0x80000 /* 0.5MB */
@@ -388,7 +403,7 @@ void __init parisc_setup_cache_timing(void)
 {
 	unsigned long rangetime, alltime;
 	unsigned long size;
-	unsigned long threshold;
+	unsigned long threshold, threshold2;
 
 	alltime = mfctl(16);
 	flush_data_cache();
@@ -403,8 +418,20 @@ void __init parisc_setup_cache_timing(void)
 		alltime, size, rangetime);
 
 	threshold = L1_CACHE_ALIGN(size * alltime / rangetime);
-	if (threshold > cache_info.dc_size)
-		threshold = cache_info.dc_size;
+
+	/*
+	 * The threshold computed above isn't very reliable since the
+	 * flush times depend greatly on the percentage of dirty lines
+	 * in the flush range. Further, the whole cache time doesn't
+	 * include the time to refill lines that aren't in the mm/vma
+	 * being flushed. By timing glibc build and checks on mako cpus,
+	 * the following formula seems to work reasonably well. The
+	 * value from the timing calculation is too small, and increases
+	 * build and check times by almost a factor two.
+	 */
+	threshold2 = cache_info.dc_size * num_online_cpus();
+	if (threshold2 > threshold)
+		threshold = threshold2;
 	if (threshold)
 		parisc_cache_flush_threshold = threshold;
 	printk(KERN_INFO "Cache flush threshold set to %lu KiB\n",
@@ -457,7 +484,7 @@ void flush_kernel_dcache_page_addr(void *addr)
 
 	flush_kernel_dcache_page_asm(addr);
 	purge_tlb_start(flags);
-	pdtlb_kernel(addr);
+	pdtlb(SR_KERNEL, addr);
 	purge_tlb_end(flags);
 }
 EXPORT_SYMBOL(flush_kernel_dcache_page_addr);
@@ -496,25 +523,15 @@ int __flush_tlb_range(unsigned long sid, unsigned long start,
 	   but cause a purge request to be broadcast to other TLBs.  */
 	while (start < end) {
 		purge_tlb_start(flags);
-		mtsp(sid, 1);
-		pdtlb(start);
-		pitlb(start);
+		mtsp(sid, SR_TEMP1);
+		pdtlb(SR_TEMP1, start);
+		pitlb(SR_TEMP1, start);
 		purge_tlb_end(flags);
 		start += PAGE_SIZE;
 	}
 	return 0;
 }
 
-static void cacheflush_h_tmp_function(void *dummy)
-{
-	flush_cache_all_local();
-}
-
-void flush_cache_all(void)
-{
-	on_each_cpu(cacheflush_h_tmp_function, NULL, 1);
-}
-
 static inline unsigned long mm_total_size(struct mm_struct *mm)
 {
 	struct vm_area_struct *vma;
@@ -558,15 +575,6 @@ static void flush_cache_pages(struct vm_area_struct *vma, struct mm_struct *mm,
 	}
 }
 
-static void flush_user_cache_tlb(struct vm_area_struct *vma,
-				 unsigned long start, unsigned long end)
-{
-	flush_user_dcache_range_asm(start, end);
-	if (vma->vm_flags & VM_EXEC)
-		flush_user_icache_range_asm(start, end);
-	flush_tlb_range(vma, start, end);
-}
-
 void flush_cache_mm(struct mm_struct *mm)
 {
 	struct vm_area_struct *vma;
@@ -575,23 +583,14 @@ void flush_cache_mm(struct mm_struct *mm)
 	   rp3440, etc.  So, avoid it if the mm isn't too big.  */
 	if ((!IS_ENABLED(CONFIG_SMP) || !arch_irqs_disabled()) &&
 	    mm_total_size(mm) >= parisc_cache_flush_threshold) {
-		if (mm->context)
+		if (mm->context.space_id)
 			flush_tlb_all();
 		flush_cache_all();
 		return;
 	}
 
-	preempt_disable();
-	if (mm->context == mfsp(3)) {
-		for (vma = mm->mmap; vma; vma = vma->vm_next)
-			flush_user_cache_tlb(vma, vma->vm_start, vma->vm_end);
-		preempt_enable();
-		return;
-	}
-
 	for (vma = mm->mmap; vma; vma = vma->vm_next)
 		flush_cache_pages(vma, mm, vma->vm_start, vma->vm_end);
-	preempt_enable();
 }
 
 void flush_cache_range(struct vm_area_struct *vma,
@@ -599,29 +598,21 @@ void flush_cache_range(struct vm_area_struct *vma,
 {
 	if ((!IS_ENABLED(CONFIG_SMP) || !arch_irqs_disabled()) &&
 	    end - start >= parisc_cache_flush_threshold) {
-		if (vma->vm_mm->context)
+		if (vma->vm_mm->context.space_id)
 			flush_tlb_range(vma, start, end);
 		flush_cache_all();
 		return;
 	}
 
-	preempt_disable();
-	if (vma->vm_mm->context == mfsp(3)) {
-		flush_user_cache_tlb(vma, start, end);
-		preempt_enable();
-		return;
-	}
-
-	flush_cache_pages(vma, vma->vm_mm, vma->vm_start, vma->vm_end);
-	preempt_enable();
+	flush_cache_pages(vma, vma->vm_mm, start, end);
 }
 
 void
 flush_cache_page(struct vm_area_struct *vma, unsigned long vmaddr, unsigned long pfn)
 {
 	if (pfn_valid(pfn)) {
-		if (likely(vma->vm_mm->context)) {
-			flush_tlb_page(vma, vmaddr);
+		flush_tlb_page(vma, vmaddr);
+		if (likely(vma->vm_mm->context.space_id)) {
 			__flush_cache_page(vma, vmaddr, PFN_PHYS(pfn));
 		} else {
 			__purge_cache_page(vma, vmaddr, PFN_PHYS(pfn));
@@ -633,6 +624,7 @@ void flush_kernel_vmap_range(void *vaddr, int size)
 {
 	unsigned long start = (unsigned long)vaddr;
 	unsigned long end = start + size;
+	unsigned long flags, physaddr;
 
 	if ((!IS_ENABLED(CONFIG_SMP) || !arch_irqs_disabled()) &&
 	    (unsigned long)size >= parisc_cache_flush_threshold) {
@@ -641,8 +633,14 @@ void flush_kernel_vmap_range(void *vaddr, int size)
 		return;
 	}
 
-	flush_kernel_dcache_range_asm(start, end);
-	flush_tlb_kernel_range(start, end);
+	while (start < end) {
+		physaddr = lpa(start);
+		purge_tlb_start(flags);
+		pdtlb(SR_KERNEL, start);
+		purge_tlb_end(flags);
+		flush_dcache_page_asm(physaddr, start);
+		start += PAGE_SIZE;
+	}
 }
 EXPORT_SYMBOL(flush_kernel_vmap_range);
 
@@ -650,6 +648,7 @@ void invalidate_kernel_vmap_range(void *vaddr, int size)
 {
 	unsigned long start = (unsigned long)vaddr;
 	unsigned long end = start + size;
+	unsigned long flags, physaddr;
 
 	if ((!IS_ENABLED(CONFIG_SMP) || !arch_irqs_disabled()) &&
 	    (unsigned long)size >= parisc_cache_flush_threshold) {
@@ -658,7 +657,13 @@ void invalidate_kernel_vmap_range(void *vaddr, int size)
 		return;
 	}
 
-	purge_kernel_dcache_range_asm(start, end);
-	flush_tlb_kernel_range(start, end);
+	while (start < end) {
+		physaddr = lpa(start);
+		purge_tlb_start(flags);
+		pdtlb(SR_KERNEL, start);
+		purge_tlb_end(flags);
+		purge_dcache_page_asm(physaddr, start);
+		start += PAGE_SIZE;
+	}
 }
 EXPORT_SYMBOL(invalidate_kernel_vmap_range);
diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S
index 6e9cdb269862..ecf50159359e 100644
--- a/arch/parisc/kernel/entry.S
+++ b/arch/parisc/kernel/entry.S
@@ -1288,74 +1288,12 @@ nadtlb_check_alias_20:
 nadtlb_emulate:
 
 	/*
-	 * Non access misses can be caused by fdc,fic,pdc,lpa,probe and
-	 * probei instructions. We don't want to fault for these
-	 * instructions (not only does it not make sense, it can cause
-	 * deadlocks, since some flushes are done with the mmap
-	 * semaphore held). If the translation doesn't exist, we can't
-	 * insert a translation, so have to emulate the side effects
-	 * of the instruction. Since we don't insert a translation
-	 * we can get a lot of faults during a flush loop, so it makes
-	 * sense to try to do it here with minimum overhead. We only
-	 * emulate fdc,fic,pdc,probew,prober instructions whose base 
-	 * and index registers are not shadowed. We defer everything 
-	 * else to the "slow" path.
+	 * Non-access misses can be caused by fdc,fic,pdc,lpa,probe and
+	 * probei instructions. The kernel no longer faults doing flushes.
+	 * Use of lpa and probe instructions is rare. Given the issue
+	 * with shadow registers, we defer everything to the "slow" path.
 	 */
-
-	mfctl           %cr19,%r9 /* Get iir */
-
-	/* PA 2.0 Arch Ref. Book pg 382 has a good description of the insn bits.
-	   Checks for fdc,fdce,pdc,"fic,4f",prober,probeir,probew, probeiw */
-
-	/* Checks for fdc,fdce,pdc,"fic,4f" only */
-	ldi             0x280,%r16
-	and             %r9,%r16,%r17
-	cmpb,<>,n       %r16,%r17,nadtlb_probe_check
-	bb,>=,n         %r9,26,nadtlb_nullify  /* m bit not set, just nullify */
-	BL		get_register,%r25
-	extrw,u         %r9,15,5,%r8           /* Get index register # */
-	cmpib,COND(=),n        -1,%r1,nadtlb_fault    /* have to use slow path */
-	copy            %r1,%r24
-	BL		get_register,%r25
-	extrw,u         %r9,10,5,%r8           /* Get base register # */
-	cmpib,COND(=),n        -1,%r1,nadtlb_fault    /* have to use slow path */
-	BL		set_register,%r25
-	add,l           %r1,%r24,%r1           /* doesn't affect c/b bits */
-
-nadtlb_nullify:
-	mfctl           %ipsw,%r8
-	ldil            L%PSW_N,%r9
-	or              %r8,%r9,%r8            /* Set PSW_N */
-	mtctl           %r8,%ipsw
-
-	rfir
-	nop
-
-	/* 
-		When there is no translation for the probe address then we
-		must nullify the insn and return zero in the target register.
-		This will indicate to the calling code that it does not have 
-		write/read privileges to this address.
-
-		This should technically work for prober and probew in PA 1.1,
-		and also probe,r and probe,w in PA 2.0
-
-		WARNING: USE ONLY NON-SHADOW REGISTERS WITH PROBE INSN!
-		THE SLOW-PATH EMULATION HAS NOT BEEN WRITTEN YET.
-
-	*/
-nadtlb_probe_check:
-	ldi             0x80,%r16
-	and             %r9,%r16,%r17
-	cmpb,<>,n       %r16,%r17,nadtlb_fault /* Must be probe,[rw]*/
-	BL              get_register,%r25      /* Find the target register */
-	extrw,u         %r9,31,5,%r8           /* Get target register */
-	cmpib,COND(=),n        -1,%r1,nadtlb_fault    /* have to use slow path */
-	BL		set_register,%r25
-	copy            %r0,%r1                /* Write zero to target register */
-	b nadtlb_nullify                       /* Nullify return insn */
-	nop
-
+	b,n		nadtlb_fault
 
 #ifdef CONFIG_64BIT
 itlb_miss_20w:
diff --git a/arch/parisc/kernel/kprobes.c b/arch/parisc/kernel/kprobes.c
index e2bdb5a5f93e..3343d2fb7889 100644
--- a/arch/parisc/kernel/kprobes.c
+++ b/arch/parisc/kernel/kprobes.c
@@ -5,6 +5,7 @@
  * PA-RISC kprobes implementation
  *
  * Copyright (c) 2019 Sven Schnelle <svens@stackframe.org>
+ * Copyright (c) 2022 Helge Deller <deller@gmx.de>
  */
 
 #include <linux/types.h>
@@ -25,9 +26,14 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p)
 	if (!p->ainsn.insn)
 		return -ENOMEM;
 
-	memcpy(p->ainsn.insn, p->addr,
-		MAX_INSN_SIZE * sizeof(kprobe_opcode_t));
+	/*
+	 * Set up new instructions. Second break instruction will
+	 * trigger call of parisc_kprobe_ss_handler().
+	 */
 	p->opcode = *p->addr;
+	p->ainsn.insn[0] = p->opcode;
+	p->ainsn.insn[1] = PARISC_KPROBES_BREAK_INSN2;
+
 	flush_insn_slot(p);
 	return 0;
 }
@@ -73,9 +79,7 @@ static void __kprobes setup_singlestep(struct kprobe *p,
 {
 	kcb->iaoq[0] = regs->iaoq[0];
 	kcb->iaoq[1] = regs->iaoq[1];
-	regs->iaoq[0] = (unsigned long)p->ainsn.insn;
-	mtctl(0, 0);
-	regs->gr[0] |= PSW_R;
+	instruction_pointer_set(regs, (unsigned long)p->ainsn.insn);
 }
 
 int __kprobes parisc_kprobe_break_handler(struct pt_regs *regs)
@@ -165,9 +169,8 @@ int __kprobes parisc_kprobe_ss_handler(struct pt_regs *regs)
 		regs->iaoq[0] = kcb->iaoq[1];
 		break;
 	default:
-		regs->iaoq[1] = kcb->iaoq[0];
-		regs->iaoq[1] += (regs->iaoq[1] - regs->iaoq[0]) + 4;
 		regs->iaoq[0] = kcb->iaoq[1];
+		regs->iaoq[1] = regs->iaoq[0] + 4;
 		break;
 	}
 	kcb->kprobe_status = KPROBE_HIT_SSDONE;
@@ -191,14 +194,17 @@ static struct kprobe trampoline_p = {
 static int __kprobes trampoline_probe_handler(struct kprobe *p,
 					      struct pt_regs *regs)
 {
-	unsigned long orig_ret_address;
-
-	orig_ret_address = __kretprobe_trampoline_handler(regs, NULL);
-	instruction_pointer_set(regs, orig_ret_address);
+	__kretprobe_trampoline_handler(regs, NULL);
 
 	return 1;
 }
 
+void arch_kretprobe_fixup_return(struct pt_regs *regs,
+				 kprobe_opcode_t *correct_ret_addr)
+{
+	regs->gr[2] = (unsigned long)correct_ret_addr;
+}
+
 void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
 				      struct pt_regs *regs)
 {
diff --git a/arch/parisc/kernel/pci-dma.c b/arch/parisc/kernel/pci-dma.c
index 36a57aa38e87..160996f2198e 100644
--- a/arch/parisc/kernel/pci-dma.c
+++ b/arch/parisc/kernel/pci-dma.c
@@ -91,7 +91,7 @@ static inline int map_pte_uncached(pte_t * pte,
 			printk(KERN_ERR "map_pte_uncached: page already exists\n");
 		purge_tlb_start(flags);
 		set_pte(pte, __mk_pte(*paddr_ptr, PAGE_KERNEL_UNC));
-		pdtlb_kernel(orig_vaddr);
+		pdtlb(SR_KERNEL, orig_vaddr);
 		purge_tlb_end(flags);
 		vaddr += PAGE_SIZE;
 		orig_vaddr += PAGE_SIZE;
@@ -175,7 +175,7 @@ static inline void unmap_uncached_pte(pmd_t * pmd, unsigned long vaddr,
 
 		pte_clear(&init_mm, vaddr, pte);
 		purge_tlb_start(flags);
-		pdtlb_kernel(orig_vaddr);
+		pdtlb(SR_KERNEL, orig_vaddr);
 		purge_tlb_end(flags);
 		vaddr += PAGE_SIZE;
 		orig_vaddr += PAGE_SIZE;
diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c
index 46b1050640b8..3dd672e2e301 100644
--- a/arch/parisc/kernel/signal.c
+++ b/arch/parisc/kernel/signal.c
@@ -1,16 +1,13 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- *  linux/arch/parisc/kernel/signal.c: Architecture-specific signal
- *  handling support.
+ *  PA-RISC architecture-specific signal handling support.
  *
  *  Copyright (C) 2000 David Huggins-Daines <dhd@debian.org>
  *  Copyright (C) 2000 Linuxcare, Inc.
+ *  Copyright (C) 2000-2022 Helge Deller <deller@gmx.de>
+ *  Copyright (C) 2022 John David Anglin <dave.anglin@bell.net>
  *
  *  Based on the ia64, i386, and alpha versions.
- *
- *  Like the IA-64, we are a recent enough port (we are *starting*
- *  with glibc2.2) that we do not need to support the old non-realtime
- *  Linux signals.  Therefore we don't.
  */
 
 #include <linux/sched.h>
@@ -32,6 +29,7 @@
 #include <linux/uaccess.h>
 #include <asm/cacheflush.h>
 #include <asm/asm-offsets.h>
+#include <asm/vdso.h>
 
 #ifdef CONFIG_COMPAT
 #include "signal32.h"
@@ -59,14 +57,6 @@
  * Do a signal return - restore sigcontext.
  */
 
-/* Trampoline for calling rt_sigreturn() */
-#define INSN_LDI_R25_0	 0x34190000 /* ldi  0,%r25 (in_syscall=0) */
-#define INSN_LDI_R25_1	 0x34190002 /* ldi  1,%r25 (in_syscall=1) */
-#define INSN_LDI_R20	 0x3414015a /* ldi  __NR_rt_sigreturn,%r20 */
-#define INSN_BLE_SR2_R0  0xe4008200 /* be,l 0x100(%sr2,%r0),%sr0,%r31 */
-/* For debugging */
-#define INSN_DIE_HORRIBLY 0x68000ccc /* stw %r0,0x666(%sr0,%r0) */
-
 static long
 restore_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs)
 {
@@ -77,9 +67,9 @@ restore_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs)
 	err |= __copy_from_user(regs->iaoq, sc->sc_iaoq, sizeof(regs->iaoq));
 	err |= __copy_from_user(regs->iasq, sc->sc_iasq, sizeof(regs->iasq));
 	err |= __get_user(regs->sar, &sc->sc_sar);
-	DBG(2,"restore_sigcontext: iaoq is %#lx / %#lx\n",
-			regs->iaoq[0],regs->iaoq[1]);
-	DBG(2,"restore_sigcontext: r28 is %ld\n", regs->gr[28]);
+	DBG(2, "%s: iaoq is %#lx / %#lx\n",
+			__func__, regs->iaoq[0], regs->iaoq[1]);
+	DBG(2, "%s: r28 is %ld\n", __func__, regs->gr[28]);
 	return err;
 }
 
@@ -102,7 +92,7 @@ sys_rt_sigreturn(struct pt_regs *regs, int in_syscall)
 	/* Unwind the user stack to get the rt_sigframe structure. */
 	frame = (struct rt_sigframe __user *)
 		(usp - sigframe_size);
-	DBG(2,"sys_rt_sigreturn: frame is %p\n", frame);
+	DBG(2, "%s: frame is %p pid %d\n", __func__, frame, task_pid_nr(current));
 
 	regs->orig_r28 = 1; /* no restarts for sigreturn */
 
@@ -110,7 +100,6 @@ sys_rt_sigreturn(struct pt_regs *regs, int in_syscall)
 	compat_frame = (struct compat_rt_sigframe __user *)frame;
 	
 	if (is_compat_task()) {
-		DBG(2,"sys_rt_sigreturn: ELF32 process.\n");
 		if (get_compat_sigset(&set, &compat_frame->uc.uc_sigmask))
 			goto give_sigsegv;
 	} else
@@ -125,25 +114,25 @@ sys_rt_sigreturn(struct pt_regs *regs, int in_syscall)
 	/* Good thing we saved the old gr[30], eh? */
 #ifdef CONFIG_64BIT
 	if (is_compat_task()) {
-		DBG(1,"sys_rt_sigreturn: compat_frame->uc.uc_mcontext 0x%p\n",
-				&compat_frame->uc.uc_mcontext);
+		DBG(1, "%s: compat_frame->uc.uc_mcontext 0x%p\n",
+				__func__, &compat_frame->uc.uc_mcontext);
 // FIXME: Load upper half from register file
 		if (restore_sigcontext32(&compat_frame->uc.uc_mcontext, 
 					&compat_frame->regs, regs))
 			goto give_sigsegv;
-		DBG(1,"sys_rt_sigreturn: usp %#08lx stack 0x%p\n", 
-				usp, &compat_frame->uc.uc_stack);
+		DBG(1, "%s: usp %#08lx stack 0x%p\n",
+				__func__, usp, &compat_frame->uc.uc_stack);
 		if (compat_restore_altstack(&compat_frame->uc.uc_stack))
 			goto give_sigsegv;
 	} else
 #endif
 	{
-		DBG(1,"sys_rt_sigreturn: frame->uc.uc_mcontext 0x%p\n",
-				&frame->uc.uc_mcontext);
+		DBG(1, "%s: frame->uc.uc_mcontext 0x%p\n",
+				__func__, &frame->uc.uc_mcontext);
 		if (restore_sigcontext(&frame->uc.uc_mcontext, regs))
 			goto give_sigsegv;
-		DBG(1,"sys_rt_sigreturn: usp %#08lx stack 0x%p\n", 
-				usp, &frame->uc.uc_stack);
+		DBG(1, "%s: usp %#08lx stack 0x%p\n",
+				__func__, usp, &frame->uc.uc_stack);
 		if (restore_altstack(&frame->uc.uc_stack))
 			goto give_sigsegv;
 	}
@@ -155,14 +144,11 @@ sys_rt_sigreturn(struct pt_regs *regs, int in_syscall)
 	 */
 	if (in_syscall)
 		regs->gr[31] = regs->iaoq[0];
-#if DEBUG_SIG
-	DBG(1,"sys_rt_sigreturn: returning to %#lx, DUMPING REGS:\n", regs->iaoq[0]);
-	show_regs(regs);
-#endif
+
 	return;
 
 give_sigsegv:
-	DBG(1,"sys_rt_sigreturn: Sending SIGSEGV\n");
+	DBG(1, "%s: Sending SIGSEGV\n", __func__);
 	force_sig(SIGSEGV);
 	return;
 }
@@ -177,15 +163,15 @@ get_sigframe(struct k_sigaction *ka, unsigned long sp, size_t frame_size)
 	/*FIXME: ELF32 vs. ELF64 has different frame_size, but since we
 	  don't use the parameter it doesn't matter */
 
-	DBG(1,"get_sigframe: ka = %#lx, sp = %#lx, frame_size = %#lx\n",
-			(unsigned long)ka, sp, frame_size);
+	DBG(1, "%s: ka = %#lx, sp = %#lx, frame_size = %zu\n",
+			__func__, (unsigned long)ka, sp, frame_size);
 	
 	/* Align alternate stack and reserve 64 bytes for the signal
 	   handler's frame marker.  */
 	if ((ka->sa.sa_flags & SA_ONSTACK) != 0 && ! sas_ss_flags(sp))
 		sp = (current->sas_ss_sp + 0x7f) & ~0x3f; /* Stacks grow up! */
 
-	DBG(1,"get_sigframe: Returning sp = %#lx\n", (unsigned long)sp);
+	DBG(1, "%s: Returning sp = %#lx\n", __func__, (unsigned long)sp);
 	return (void __user *) sp; /* Stacks grow up.  Fun. */
 }
 
@@ -205,20 +191,20 @@ setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, int in_sysc
 		err |= __put_user(regs->gr[31]+4, &sc->sc_iaoq[1]);
 		err |= __put_user(regs->sr[3], &sc->sc_iasq[0]);
 		err |= __put_user(regs->sr[3], &sc->sc_iasq[1]);
-		DBG(1,"setup_sigcontext: iaoq %#lx / %#lx (in syscall)\n",
-			regs->gr[31], regs->gr[31]+4);
+		DBG(1, "%s: iaoq %#lx / %#lx (in syscall)\n",
+			__func__, regs->gr[31], regs->gr[31]+4);
 	} else {
 		err |= __copy_to_user(sc->sc_iaoq, regs->iaoq, sizeof(regs->iaoq));
 		err |= __copy_to_user(sc->sc_iasq, regs->iasq, sizeof(regs->iasq));
-		DBG(1,"setup_sigcontext: iaoq %#lx / %#lx (not in syscall)\n", 
-			regs->iaoq[0], regs->iaoq[1]);
+		DBG(1, "%s: iaoq %#lx / %#lx (not in syscall)\n",
+			__func__, regs->iaoq[0], regs->iaoq[1]);
 	}
 
 	err |= __put_user(flags, &sc->sc_flags);
 	err |= __copy_to_user(sc->sc_gr, regs->gr, sizeof(regs->gr));
 	err |= __copy_to_user(sc->sc_fr, regs->fr, sizeof(regs->fr));
 	err |= __put_user(regs->sar, &sc->sc_sar);
-	DBG(1,"setup_sigcontext: r28 is %ld\n", regs->gr[28]);
+	DBG(1, "%s: r28 is %ld\n", __func__, regs->gr[28]);
 
 	return err;
 }
@@ -230,7 +216,7 @@ setup_rt_frame(struct ksignal *ksig, sigset_t *set, struct pt_regs *regs,
 	struct rt_sigframe __user *frame;
 	unsigned long rp, usp;
 	unsigned long haddr, sigframe_size;
-	unsigned long start, end;
+	unsigned long start;
 	int err = 0;
 #ifdef CONFIG_64BIT
 	struct compat_rt_sigframe __user * compat_frame;
@@ -247,11 +233,10 @@ setup_rt_frame(struct ksignal *ksig, sigset_t *set, struct pt_regs *regs,
 #endif
 	frame = get_sigframe(&ksig->ka, usp, sigframe_size);
 
-	DBG(1,"SETUP_RT_FRAME: START\n");
-	DBG(1,"setup_rt_frame: frame %p info %p\n", frame, ksig->info);
+	DBG(1, "%s: frame %p info %p\n", __func__, frame, &ksig->info);
 
 	start = (unsigned long) frame;
-	if (start >= user_addr_max() - sigframe_size)
+	if (start >= TASK_SIZE_MAX - sigframe_size)
 		return -EFAULT;
 	
 #ifdef CONFIG_64BIT
@@ -259,11 +244,12 @@ setup_rt_frame(struct ksignal *ksig, sigset_t *set, struct pt_regs *regs,
 	compat_frame = (struct compat_rt_sigframe __user *)frame;
 	
 	if (is_compat_task()) {
-		DBG(1,"setup_rt_frame: frame->info = 0x%p\n", &compat_frame->info);
+		DBG(1, "%s: frame->info = 0x%p\n", __func__, &compat_frame->info);
 		err |= copy_siginfo_to_user32(&compat_frame->info, &ksig->info);
 		err |= __compat_save_altstack( &compat_frame->uc.uc_stack, regs->gr[30]);
-		DBG(1,"setup_rt_frame: frame->uc = 0x%p\n", &compat_frame->uc);
-		DBG(1,"setup_rt_frame: frame->uc.uc_mcontext = 0x%p\n", &compat_frame->uc.uc_mcontext);
+		DBG(1, "%s: frame->uc = 0x%p\n", __func__, &compat_frame->uc);
+		DBG(1, "%s: frame->uc.uc_mcontext = 0x%p\n",
+			__func__, &compat_frame->uc.uc_mcontext);
 		err |= setup_sigcontext32(&compat_frame->uc.uc_mcontext, 
 					&compat_frame->regs, regs, in_syscall);
 		err |= put_compat_sigset(&compat_frame->uc.uc_sigmask, set,
@@ -271,11 +257,12 @@ setup_rt_frame(struct ksignal *ksig, sigset_t *set, struct pt_regs *regs,
 	} else
 #endif
 	{	
-		DBG(1,"setup_rt_frame: frame->info = 0x%p\n", &frame->info);
+		DBG(1, "%s: frame->info = 0x%p\n", __func__, &frame->info);
 		err |= copy_siginfo_to_user(&frame->info, &ksig->info);
 		err |= __save_altstack(&frame->uc.uc_stack, regs->gr[30]);
-		DBG(1,"setup_rt_frame: frame->uc = 0x%p\n", &frame->uc);
-		DBG(1,"setup_rt_frame: frame->uc.uc_mcontext = 0x%p\n", &frame->uc.uc_mcontext);
+		DBG(1, "%s: frame->uc = 0x%p\n", __func__, &frame->uc);
+		DBG(1, "%s: frame->uc.uc_mcontext = 0x%p\n",
+			__func__, &frame->uc.uc_mcontext);
 		err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, in_syscall);
 		/* FIXME: Should probably be converted as well for the compat case */
 		err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
@@ -284,32 +271,15 @@ setup_rt_frame(struct ksignal *ksig, sigset_t *set, struct pt_regs *regs,
 	if (err)
 		return -EFAULT;
 
-	/* Set up to return from userspace.  If provided, use a stub
-	   already in userspace. The first words of tramp are used to
-	   save the previous sigrestartblock trampoline that might be
-	   on the stack. We start the sigreturn trampoline at 
-	   SIGRESTARTBLOCK_TRAMP+X. */
-	err |= __put_user(in_syscall ? INSN_LDI_R25_1 : INSN_LDI_R25_0,
-			&frame->tramp[SIGRESTARTBLOCK_TRAMP+0]);
-	err |= __put_user(INSN_LDI_R20, 
-			&frame->tramp[SIGRESTARTBLOCK_TRAMP+1]);
-	err |= __put_user(INSN_BLE_SR2_R0, 
-			&frame->tramp[SIGRESTARTBLOCK_TRAMP+2]);
-	err |= __put_user(INSN_NOP, &frame->tramp[SIGRESTARTBLOCK_TRAMP+3]);
-
-	start = (unsigned long) &frame->tramp[0];
-	end = (unsigned long) &frame->tramp[TRAMP_SIZE];
-	flush_user_dcache_range_asm(start, end);
-	flush_user_icache_range_asm(start, end);
-
-	/* TRAMP Words 0-4, Length 5 = SIGRESTARTBLOCK_TRAMP
-	 * TRAMP Words 5-9, Length 4 = SIGRETURN_TRAMP
-	 * So the SIGRETURN_TRAMP is at the end of SIGRESTARTBLOCK_TRAMP
-	 */
-	rp = (unsigned long) &frame->tramp[SIGRESTARTBLOCK_TRAMP];
+#ifdef CONFIG_64BIT
+	if (!is_compat_task())
+		rp = VDSO64_SYMBOL(current, sigtramp_rt);
+	else
+#endif
+		rp = VDSO32_SYMBOL(current, sigtramp_rt);
 
-	if (err)
-		return -EFAULT;
+	if (in_syscall)
+		rp += 4*4; /* skip 4 instructions and start at ldi 1,%r25 */
 
 	haddr = A(ksig->ka.sa.sa_handler);
 	/* The sa_handler may be a pointer to a function descriptor */
@@ -340,8 +310,8 @@ setup_rt_frame(struct ksignal *ksig, sigset_t *set, struct pt_regs *regs,
 		
 		haddr = fdesc.addr;
 		regs->gr[19] = fdesc.gp;
-		DBG(1,"setup_rt_frame: 64 bit signal, exe=%#lx, r19=%#lx, in_syscall=%d\n",
-		     haddr, regs->gr[19], in_syscall);
+		DBG(1, "%s: 64 bit signal, exe=%#lx, r19=%#lx, in_syscall=%d\n",
+		     __func__, haddr, regs->gr[19], in_syscall);
 	}
 #endif
 
@@ -351,7 +321,7 @@ setup_rt_frame(struct ksignal *ksig, sigset_t *set, struct pt_regs *regs,
 		regs->gr[31] = haddr;
 #ifdef CONFIG_64BIT
 		if (!test_thread_flag(TIF_32BIT))
-			sigframe_size |= 1;
+			sigframe_size |= 1; /* XXX ???? */
 #endif
 	} else {
 		unsigned long psw = USER_PSW;
@@ -373,11 +343,11 @@ setup_rt_frame(struct ksignal *ksig, sigset_t *set, struct pt_regs *regs,
 		}
 
 		regs->gr[0] = psw;
-		regs->iaoq[0] = haddr | 3;
+		regs->iaoq[0] = haddr | PRIV_USER;
 		regs->iaoq[1] = regs->iaoq[0] + 4;
 	}
 
-	regs->gr[2]  = rp;                /* userland return pointer */
+	regs->gr[2]  = rp;			/* userland return pointer */
 	regs->gr[26] = ksig->sig;               /* signal number */
 	
 #ifdef CONFIG_64BIT
@@ -391,15 +361,15 @@ setup_rt_frame(struct ksignal *ksig, sigset_t *set, struct pt_regs *regs,
 		regs->gr[24] = A(&frame->uc);   /* ucontext pointer */
 	}
 	
-	DBG(1,"setup_rt_frame: making sigreturn frame: %#lx + %#lx = %#lx\n",
+	DBG(1, "%s: making sigreturn frame: %#lx + %#lx = %#lx\n", __func__,
 	       regs->gr[30], sigframe_size,
 	       regs->gr[30] + sigframe_size);
 	/* Raise the user stack pointer to make a proper call frame. */
 	regs->gr[30] = (A(frame) + sigframe_size);
 
 
-	DBG(1,"setup_rt_frame: sig deliver (%s,%d) frame=0x%p sp=%#lx iaoq=%#lx/%#lx rp=%#lx\n",
-	       current->comm, current->pid, frame, regs->gr[30],
+	DBG(1, "%s: sig deliver (%s,%d) frame=0x%p sp=%#lx iaoq=%#lx/%#lx rp=%#lx\n",
+	       __func__, current->comm, current->pid, frame, regs->gr[30],
 	       regs->iaoq[0], regs->iaoq[1], rp);
 
 	return 0;
@@ -415,8 +385,8 @@ handle_signal(struct ksignal *ksig, struct pt_regs *regs, int in_syscall)
 	int ret;
 	sigset_t *oldset = sigmask_to_save();
 
-	DBG(1,"handle_signal: sig=%ld, ka=%p, info=%p, oldset=%p, regs=%p\n",
-	       ksig->sig, ksig->ka, ksig->info, oldset, regs);
+	DBG(1, "%s: sig=%d, ka=%p, info=%p, oldset=%p, regs=%p\n",
+	       __func__, ksig->sig, &ksig->ka, &ksig->info, oldset, regs);
 	
 	/* Set up the stack frame */
 	ret = setup_rt_frame(ksig, oldset, regs, in_syscall);
@@ -424,8 +394,8 @@ handle_signal(struct ksignal *ksig, struct pt_regs *regs, int in_syscall)
 	signal_setup_done(ret, ksig, test_thread_flag(TIF_SINGLESTEP) ||
 			  test_thread_flag(TIF_BLOCKSTEP));
 
-	DBG(1,KERN_DEBUG "do_signal: Exit (success), regs->gr[28] = %ld\n",
-		regs->gr[28]);
+	DBG(1, "%s: Exit (success), regs->gr[28] = %ld\n",
+		__func__, regs->gr[28]);
 }
 
 /*
@@ -483,21 +453,27 @@ syscall_restart(struct pt_regs *regs, struct k_sigaction *ka)
 	if (regs->orig_r28)
 		return;
 	regs->orig_r28 = 1; /* no more restarts */
+
+	DBG(1, "%s:  orig_r28 = %ld  pid %d  r20 %ld\n",
+		__func__, regs->orig_r28, task_pid_nr(current), regs->gr[20]);
+
 	/* Check the return code */
 	switch (regs->gr[28]) {
 	case -ERESTART_RESTARTBLOCK:
 	case -ERESTARTNOHAND:
-		DBG(1,"ERESTARTNOHAND: returning -EINTR\n");
+		DBG(1, "%s: ERESTARTNOHAND: returning -EINTR\n", __func__);
 		regs->gr[28] = -EINTR;
 		break;
 	case -ERESTARTSYS:
 		if (!(ka->sa.sa_flags & SA_RESTART)) {
-			DBG(1,"ERESTARTSYS: putting -EINTR\n");
+			DBG(1, "%s: ERESTARTSYS: putting -EINTR pid %d\n",
+				__func__, task_pid_nr(current));
 			regs->gr[28] = -EINTR;
 			break;
 		}
 		fallthrough;
 	case -ERESTARTNOINTR:
+		DBG(1, "%s: %ld\n", __func__, regs->gr[28]);
 		check_syscallno_in_delay_branch(regs);
 		break;
 	}
@@ -509,50 +485,52 @@ insert_restart_trampoline(struct pt_regs *regs)
 	if (regs->orig_r28)
 		return;
 	regs->orig_r28 = 1; /* no more restarts */
-	switch(regs->gr[28]) {
+
+	DBG(2, "%s: gr28 = %ld pid %d\n",
+		__func__, regs->gr[28], task_pid_nr(current));
+
+	switch (regs->gr[28]) {
 	case -ERESTART_RESTARTBLOCK: {
 		/* Restart the system call - no handlers present */
 		unsigned int *usp = (unsigned int *)regs->gr[30];
-		unsigned long start = (unsigned long) &usp[2];
-		unsigned long end  = (unsigned long) &usp[5];
+		unsigned long rp;
 		long err = 0;
 
 		/* check that we don't exceed the stack */
-		if (A(&usp[0]) >= user_addr_max() - 5 * sizeof(int))
+		if (A(&usp[0]) >= TASK_SIZE_MAX - 5 * sizeof(int))
 			return;
 
-		/* Setup a trampoline to restart the syscall
-		 * with __NR_restart_syscall
+		/* Call trampoline in vdso to restart the syscall
+		 * with __NR_restart_syscall.
+		 * Original return addresses are on stack like this:
 		 *
 		 *  0: <return address (orig r31)>
 		 *  4: <2nd half for 64-bit>
-		 *  8: ldw 0(%sp), %r31
-		 * 12: be 0x100(%sr2, %r0)
-		 * 16: ldi __NR_restart_syscall, %r20
 		 */
 #ifdef CONFIG_64BIT
-		err |= put_user(regs->gr[31] >> 32, &usp[0]);
-		err |= put_user(regs->gr[31] & 0xffffffff, &usp[1]);
-		err |= put_user(0x0fc010df, &usp[2]);
-#else
-		err |= put_user(regs->gr[31], &usp[0]);
-		err |= put_user(0x0fc0109f, &usp[2]);
+		if (!is_compat_task()) {
+			err |= put_user(regs->gr[31] >> 32, &usp[0]);
+			err |= put_user(regs->gr[31] & 0xffffffff, &usp[1]);
+			rp = VDSO64_SYMBOL(current, restart_syscall);
+		} else
 #endif
-		err |= put_user(0xe0008200, &usp[3]);
-		err |= put_user(0x34140000, &usp[4]);
-
+		{
+			err |= put_user(regs->gr[31], &usp[0]);
+			rp = VDSO32_SYMBOL(current, restart_syscall);
+		}
 		WARN_ON(err);
 
-		/* flush data/instruction cache for new insns */
-		flush_user_dcache_range_asm(start, end);
-		flush_user_icache_range_asm(start, end);
-
-		regs->gr[31] = regs->gr[30] + 8;
+		regs->gr[31] = rp;
+		DBG(1, "%s: ERESTART_RESTARTBLOCK\n", __func__);
 		return;
 	}
+	case -EINTR:
+		/* ok, was handled before and should be returned. */
+		break;
 	case -ERESTARTNOHAND:
 	case -ERESTARTSYS:
 	case -ERESTARTNOINTR:
+		DBG(1, "%s: Type %ld\n", __func__, regs->gr[28]);
 		check_syscallno_in_delay_branch(regs);
 		return;
 	default:
@@ -567,30 +545,35 @@ insert_restart_trampoline(struct pt_regs *regs)
  * registers).  As noted below, the syscall number gets restored for
  * us due to the magic of delayed branching.
  */
-asmlinkage void
-do_signal(struct pt_regs *regs, long in_syscall)
+static void do_signal(struct pt_regs *regs, long in_syscall)
 {
 	struct ksignal ksig;
+	int restart_syscall;
+	bool has_handler;
 
-	DBG(1,"\ndo_signal: regs=0x%p, sr7 %#lx, in_syscall=%d\n",
-	       regs, regs->sr[7], in_syscall);
+	has_handler = get_signal(&ksig);
 
-	if (get_signal(&ksig)) {
-		DBG(3,"do_signal: signr = %d, regs->gr[28] = %ld\n", signr, regs->gr[28]);
+	restart_syscall = 0;
+	if (in_syscall)
+		restart_syscall = 1;
+
+	if (has_handler) {
 		/* Restart a system call if necessary. */
-		if (in_syscall)
+		if (restart_syscall)
 			syscall_restart(regs, &ksig.ka);
 
 		handle_signal(&ksig, regs, in_syscall);
+		DBG(1, "%s: Handled signal pid %d\n",
+			__func__, task_pid_nr(current));
 		return;
 	}
 
-	/* Did we come from a system call? */
-	if (in_syscall)
+	/* Do we need to restart the system call? */
+	if (restart_syscall)
 		insert_restart_trampoline(regs);
 	
-	DBG(1,"do_signal: Exit (not delivered), regs->gr[28] = %ld\n", 
-		regs->gr[28]);
+	DBG(1, "%s: Exit (not delivered), regs->gr[28] = %ld  orig_r28 = %ld  pid %d\n",
+		__func__, regs->gr[28], regs->orig_r28, task_pid_nr(current));
 
 	restore_saved_sigmask();
 }
diff --git a/arch/parisc/kernel/signal32.h b/arch/parisc/kernel/signal32.h
index f166250f2d06..c03eb1ed4c53 100644
--- a/arch/parisc/kernel/signal32.h
+++ b/arch/parisc/kernel/signal32.h
@@ -36,21 +36,12 @@ struct compat_regfile {
         compat_int_t rf_sar;
 };
 
-#define COMPAT_SIGRETURN_TRAMP 4
-#define COMPAT_SIGRESTARTBLOCK_TRAMP 5
-#define COMPAT_TRAMP_SIZE (COMPAT_SIGRETURN_TRAMP + \
-				COMPAT_SIGRESTARTBLOCK_TRAMP)
-
 struct compat_rt_sigframe {
-        /* XXX: Must match trampoline size in arch/parisc/kernel/signal.c
-                Secondary to that it must protect the ERESTART_RESTARTBLOCK
-                trampoline we left on the stack (we were bad and didn't
-                change sp so we could run really fast.) */
-        compat_uint_t tramp[COMPAT_TRAMP_SIZE];
-        compat_siginfo_t info;
-        struct compat_ucontext uc;
-        /* Hidden location of truncated registers, *must* be last. */
-        struct compat_regfile regs;
+	unsigned int tramp[2]; /* holds original return address */
+	compat_siginfo_t info;
+	struct compat_ucontext uc;
+	/* Hidden location of truncated registers, *must* be last. */
+	struct compat_regfile regs;
 };
 
 /*
diff --git a/arch/parisc/kernel/topology.c b/arch/parisc/kernel/topology.c
index 0a10e4ddc528..e88a6ce7c96d 100644
--- a/arch/parisc/kernel/topology.c
+++ b/arch/parisc/kernel/topology.c
@@ -101,8 +101,8 @@ void __init store_cpu_topology(unsigned int cpuid)
 
 	update_siblings_masks(cpuid);
 
-	pr_info("CPU%u: thread %d, cpu %d, socket %d\n",
-		cpuid, cpu_topology[cpuid].thread_id,
+	pr_info("CPU%u: cpu core %d of socket %d\n",
+		cpuid,
 		cpu_topology[cpuid].core_id,
 		cpu_topology[cpuid].socket_id);
 }
diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c
index b6fdebddc8e9..a6e61cf2cad0 100644
--- a/arch/parisc/kernel/traps.c
+++ b/arch/parisc/kernel/traps.c
@@ -302,7 +302,10 @@ static void handle_break(struct pt_regs *regs)
 		parisc_kprobe_break_handler(regs);
 		return;
 	}
-
+	if (unlikely(iir == PARISC_KPROBES_BREAK_INSN2)) {
+		parisc_kprobe_ss_handler(regs);
+		return;
+	}
 #endif
 
 #ifdef CONFIG_KGDB
@@ -539,11 +542,6 @@ void notrace handle_interruption(int code, struct pt_regs *regs)
 		/* Recovery counter trap */
 		regs->gr[0] &= ~PSW_R;
 
-#ifdef CONFIG_KPROBES
-		if (parisc_kprobe_ss_handler(regs))
-			return;
-#endif
-
 #ifdef CONFIG_KGDB
 		if (kgdb_single_step) {
 			kgdb_handle_exception(0, SIGTRAP, 0, regs);
@@ -662,6 +660,8 @@ void notrace handle_interruption(int code, struct pt_regs *regs)
 			 by hand. Technically we need to emulate:
 			 fdc,fdce,pdc,"fic,4f",prober,probeir,probew, probeiw
 		*/
+		if (code == 17 && handle_nadtlb_fault(regs))
+			return;
 		fault_address = regs->ior;
 		fault_space = regs->isr;
 		break;
diff --git a/arch/parisc/kernel/unaligned.c b/arch/parisc/kernel/unaligned.c
index 237d20dd5622..ed1e88a74dc4 100644
--- a/arch/parisc/kernel/unaligned.c
+++ b/arch/parisc/kernel/unaligned.c
@@ -3,14 +3,11 @@
  *    Unaligned memory access handler
  *
  *    Copyright (C) 2001 Randolph Chung <tausq@debian.org>
+ *    Copyright (C) 2022 Helge Deller <deller@gmx.de>
  *    Significantly tweaked by LaMont Jones <lamont@debian.org>
  */
 
-#include <linux/jiffies.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/sched/signal.h>
-#include <linux/sched/debug.h>
 #include <linux/signal.h>
 #include <linux/ratelimit.h>
 #include <linux/uaccess.h>
@@ -25,18 +22,7 @@
 #define DPRINTF(fmt, args...)
 #endif
 
-#ifdef CONFIG_64BIT
-#define RFMT "%016lx"
-#else
-#define RFMT "%08lx"
-#endif
-
-#define FIXUP_BRANCH(lbl) \
-	"\tldil L%%" #lbl ", %%r1\n"			\
-	"\tldo R%%" #lbl "(%%r1), %%r1\n"		\
-	"\tbv,n %%r0(%%r1)\n"
-/* If you use FIXUP_BRANCH, then you must list this clobber */
-#define FIXUP_BRANCH_CLOBBER "r1"
+#define RFMT "%#08lx"
 
 /* 1111 1100 0000 0000 0001 0011 1100 0000 */
 #define OPCODE1(a,b,c)	((a)<<26|(b)<<12|(c)<<6) 
@@ -114,37 +100,30 @@
 #define IM14(i) IM((i),14)
 
 #define ERR_NOTHANDLED	-1
-#define ERR_PAGEFAULT	-2
 
 int unaligned_enabled __read_mostly = 1;
 
 static int emulate_ldh(struct pt_regs *regs, int toreg)
 {
 	unsigned long saddr = regs->ior;
-	unsigned long val = 0;
-	int ret;
+	unsigned long val = 0, temp1;
+	ASM_EXCEPTIONTABLE_VAR(ret);
 
 	DPRINTF("load " RFMT ":" RFMT " to r%d for 2 bytes\n", 
 		regs->isr, regs->ior, toreg);
 
 	__asm__ __volatile__  (
 "	mtsp	%4, %%sr1\n"
-"1:	ldbs	0(%%sr1,%3), %%r20\n"
+"1:	ldbs	0(%%sr1,%3), %2\n"
 "2:	ldbs	1(%%sr1,%3), %0\n"
-"	depw	%%r20, 23, 24, %0\n"
-"	copy	%%r0, %1\n"
+"	depw	%2, 23, 24, %0\n"
 "3:	\n"
-"	.section .fixup,\"ax\"\n"
-"4:	ldi	-2, %1\n"
-	FIXUP_BRANCH(3b)
-"	.previous\n"
-	ASM_EXCEPTIONTABLE_ENTRY(1b, 4b)
-	ASM_EXCEPTIONTABLE_ENTRY(2b, 4b)
-	: "=r" (val), "=r" (ret)
-	: "0" (val), "r" (saddr), "r" (regs->isr)
-	: "r20", FIXUP_BRANCH_CLOBBER );
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 3b)
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 3b)
+	: "+r" (val), "+r" (ret), "=&r" (temp1)
+	: "r" (saddr), "r" (regs->isr) );
 
-	DPRINTF("val = 0x" RFMT "\n", val);
+	DPRINTF("val = " RFMT "\n", val);
 
 	if (toreg)
 		regs->gr[toreg] = val;
@@ -155,34 +134,28 @@ static int emulate_ldh(struct pt_regs *regs, int toreg)
 static int emulate_ldw(struct pt_regs *regs, int toreg, int flop)
 {
 	unsigned long saddr = regs->ior;
-	unsigned long val = 0;
-	int ret;
+	unsigned long val = 0, temp1, temp2;
+	ASM_EXCEPTIONTABLE_VAR(ret);
 
 	DPRINTF("load " RFMT ":" RFMT " to r%d for 4 bytes\n", 
 		regs->isr, regs->ior, toreg);
 
 	__asm__ __volatile__  (
-"	zdep	%3,28,2,%%r19\n"		/* r19=(ofs&3)*8 */
-"	mtsp	%4, %%sr1\n"
-"	depw	%%r0,31,2,%3\n"
-"1:	ldw	0(%%sr1,%3),%0\n"
-"2:	ldw	4(%%sr1,%3),%%r20\n"
-"	subi	32,%%r19,%%r19\n"
-"	mtctl	%%r19,11\n"
-"	vshd	%0,%%r20,%0\n"
-"	copy	%%r0, %1\n"
+"	zdep	%4,28,2,%2\n"		/* r19=(ofs&3)*8 */
+"	mtsp	%5, %%sr1\n"
+"	depw	%%r0,31,2,%4\n"
+"1:	ldw	0(%%sr1,%4),%0\n"
+"2:	ldw	4(%%sr1,%4),%3\n"
+"	subi	32,%4,%2\n"
+"	mtctl	%2,11\n"
+"	vshd	%0,%3,%0\n"
 "3:	\n"
-"	.section .fixup,\"ax\"\n"
-"4:	ldi	-2, %1\n"
-	FIXUP_BRANCH(3b)
-"	.previous\n"
-	ASM_EXCEPTIONTABLE_ENTRY(1b, 4b)
-	ASM_EXCEPTIONTABLE_ENTRY(2b, 4b)
-	: "=r" (val), "=r" (ret)
-	: "0" (val), "r" (saddr), "r" (regs->isr)
-	: "r19", "r20", FIXUP_BRANCH_CLOBBER );
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 3b)
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 3b)
+	: "+r" (val), "+r" (ret), "=&r" (temp1), "=&r" (temp2)
+	: "r" (saddr), "r" (regs->isr) );
 
-	DPRINTF("val = 0x" RFMT "\n", val);
+	DPRINTF("val = " RFMT "\n", val);
 
 	if (flop)
 		((__u32*)(regs->fr))[toreg] = val;
@@ -195,16 +168,15 @@ static int emulate_ldd(struct pt_regs *regs, int toreg, int flop)
 {
 	unsigned long saddr = regs->ior;
 	__u64 val = 0;
-	int ret;
+	ASM_EXCEPTIONTABLE_VAR(ret);
 
 	DPRINTF("load " RFMT ":" RFMT " to r%d for 8 bytes\n", 
 		regs->isr, regs->ior, toreg);
-#ifdef CONFIG_PA20
 
-#ifndef CONFIG_64BIT
-	if (!flop)
-		return -1;
-#endif
+	if (!IS_ENABLED(CONFIG_64BIT) && !flop)
+		return ERR_NOTHANDLED;
+
+#ifdef CONFIG_64BIT
 	__asm__ __volatile__  (
 "	depd,z	%3,60,3,%%r19\n"		/* r19=(ofs&7)*8 */
 "	mtsp	%4, %%sr1\n"
@@ -214,44 +186,32 @@ static int emulate_ldd(struct pt_regs *regs, int toreg, int flop)
 "	subi	64,%%r19,%%r19\n"
 "	mtsar	%%r19\n"
 "	shrpd	%0,%%r20,%%sar,%0\n"
-"	copy	%%r0, %1\n"
 "3:	\n"
-"	.section .fixup,\"ax\"\n"
-"4:	ldi	-2, %1\n"
-	FIXUP_BRANCH(3b)
-"	.previous\n"
-	ASM_EXCEPTIONTABLE_ENTRY(1b,4b)
-	ASM_EXCEPTIONTABLE_ENTRY(2b,4b)
-	: "=r" (val), "=r" (ret)
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 3b)
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 3b)
+	: "=r" (val), "+r" (ret)
 	: "0" (val), "r" (saddr), "r" (regs->isr)
-	: "r19", "r20", FIXUP_BRANCH_CLOBBER );
+	: "r19", "r20" );
 #else
     {
-	unsigned long valh=0,vall=0;
+	unsigned long shift, temp1;
 	__asm__ __volatile__  (
-"	zdep	%5,29,2,%%r19\n"		/* r19=(ofs&3)*8 */
-"	mtsp	%6, %%sr1\n"
-"	dep	%%r0,31,2,%5\n"
-"1:	ldw	0(%%sr1,%5),%0\n"
-"2:	ldw	4(%%sr1,%5),%1\n"
-"3:	ldw	8(%%sr1,%5),%%r20\n"
-"	subi	32,%%r19,%%r19\n"
-"	mtsar	%%r19\n"
-"	vshd	%0,%1,%0\n"
-"	vshd	%1,%%r20,%1\n"
-"	copy	%%r0, %2\n"
+"	zdep	%2,29,2,%3\n"		/* r19=(ofs&3)*8 */
+"	mtsp	%5, %%sr1\n"
+"	dep	%%r0,31,2,%2\n"
+"1:	ldw	0(%%sr1,%2),%0\n"
+"2:	ldw	4(%%sr1,%2),%R0\n"
+"3:	ldw	8(%%sr1,%2),%4\n"
+"	subi	32,%3,%3\n"
+"	mtsar	%3\n"
+"	vshd	%0,%R0,%0\n"
+"	vshd	%R0,%4,%R0\n"
 "4:	\n"
-"	.section .fixup,\"ax\"\n"
-"5:	ldi	-2, %2\n"
-	FIXUP_BRANCH(4b)
-"	.previous\n"
-	ASM_EXCEPTIONTABLE_ENTRY(1b,5b)
-	ASM_EXCEPTIONTABLE_ENTRY(2b,5b)
-	ASM_EXCEPTIONTABLE_ENTRY(3b,5b)
-	: "=r" (valh), "=r" (vall), "=r" (ret)
-	: "0" (valh), "1" (vall), "r" (saddr), "r" (regs->isr)
-	: "r19", "r20", FIXUP_BRANCH_CLOBBER );
-	val=((__u64)valh<<32)|(__u64)vall;
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 4b)
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 4b)
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(3b, 4b)
+	: "+r" (val), "+r" (ret), "+r" (saddr), "=&r" (shift), "=&r" (temp1)
+	: "r" (regs->isr) );
     }
 #endif
 
@@ -267,31 +227,25 @@ static int emulate_ldd(struct pt_regs *regs, int toreg, int flop)
 
 static int emulate_sth(struct pt_regs *regs, int frreg)
 {
-	unsigned long val = regs->gr[frreg];
-	int ret;
+	unsigned long val = regs->gr[frreg], temp1;
+	ASM_EXCEPTIONTABLE_VAR(ret);
 
 	if (!frreg)
 		val = 0;
 
-	DPRINTF("store r%d (0x" RFMT ") to " RFMT ":" RFMT " for 2 bytes\n", frreg, 
+	DPRINTF("store r%d (" RFMT ") to " RFMT ":" RFMT " for 2 bytes\n", frreg,
 		val, regs->isr, regs->ior);
 
 	__asm__ __volatile__ (
-"	mtsp %3, %%sr1\n"
-"	extrw,u %1, 23, 8, %%r19\n"
-"1:	stb %1, 1(%%sr1, %2)\n"
-"2:	stb %%r19, 0(%%sr1, %2)\n"
-"	copy	%%r0, %0\n"
+"	mtsp %4, %%sr1\n"
+"	extrw,u %2, 23, 8, %1\n"
+"1:	stb %1, 0(%%sr1, %3)\n"
+"2:	stb %2, 1(%%sr1, %3)\n"
 "3:	\n"
-"	.section .fixup,\"ax\"\n"
-"4:	ldi	-2, %0\n"
-	FIXUP_BRANCH(3b)
-"	.previous\n"
-	ASM_EXCEPTIONTABLE_ENTRY(1b,4b)
-	ASM_EXCEPTIONTABLE_ENTRY(2b,4b)
-	: "=r" (ret)
-	: "r" (val), "r" (regs->ior), "r" (regs->isr)
-	: "r19", FIXUP_BRANCH_CLOBBER );
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 3b)
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 3b)
+	: "+r" (ret), "=&r" (temp1)
+	: "r" (val), "r" (regs->ior), "r" (regs->isr) );
 
 	return ret;
 }
@@ -299,7 +253,7 @@ static int emulate_sth(struct pt_regs *regs, int frreg)
 static int emulate_stw(struct pt_regs *regs, int frreg, int flop)
 {
 	unsigned long val;
-	int ret;
+	ASM_EXCEPTIONTABLE_VAR(ret);
 
 	if (flop)
 		val = ((__u32*)(regs->fr))[frreg];
@@ -308,7 +262,7 @@ static int emulate_stw(struct pt_regs *regs, int frreg, int flop)
 	else
 		val = 0;
 
-	DPRINTF("store r%d (0x" RFMT ") to " RFMT ":" RFMT " for 4 bytes\n", frreg, 
+	DPRINTF("store r%d (" RFMT ") to " RFMT ":" RFMT " for 4 bytes\n", frreg,
 		val, regs->isr, regs->ior);
 
 
@@ -328,24 +282,19 @@ static int emulate_stw(struct pt_regs *regs, int frreg, int flop)
 "	or	%%r1, %%r21, %%r21\n"
 "	stw	%%r20,0(%%sr1,%2)\n"
 "	stw	%%r21,4(%%sr1,%2)\n"
-"	copy	%%r0, %0\n"
 "3:	\n"
-"	.section .fixup,\"ax\"\n"
-"4:	ldi	-2, %0\n"
-	FIXUP_BRANCH(3b)
-"	.previous\n"
-	ASM_EXCEPTIONTABLE_ENTRY(1b,4b)
-	ASM_EXCEPTIONTABLE_ENTRY(2b,4b)
-	: "=r" (ret)
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 3b)
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 3b)
+	: "+r" (ret)
 	: "r" (val), "r" (regs->ior), "r" (regs->isr)
-	: "r19", "r20", "r21", "r22", "r1", FIXUP_BRANCH_CLOBBER );
+	: "r19", "r20", "r21", "r22", "r1" );
 
-	return 0;
+	return ret;
 }
 static int emulate_std(struct pt_regs *regs, int frreg, int flop)
 {
 	__u64 val;
-	int ret;
+	ASM_EXCEPTIONTABLE_VAR(ret);
 
 	if (flop)
 		val = regs->fr[frreg];
@@ -357,11 +306,10 @@ static int emulate_std(struct pt_regs *regs, int frreg, int flop)
 	DPRINTF("store r%d (0x%016llx) to " RFMT ":" RFMT " for 8 bytes\n", frreg, 
 		val,  regs->isr, regs->ior);
 
-#ifdef CONFIG_PA20
-#ifndef CONFIG_64BIT
-	if (!flop)
-		return -1;
-#endif
+	if (!IS_ENABLED(CONFIG_64BIT) && !flop)
+		return ERR_NOTHANDLED;
+
+#ifdef CONFIG_64BIT
 	__asm__ __volatile__ (
 "	mtsp %3, %%sr1\n"
 "	depd,z	%2, 60, 3, %%r19\n"
@@ -378,26 +326,21 @@ static int emulate_std(struct pt_regs *regs, int frreg, int flop)
 "	or	%%r1, %%r21, %%r21\n"
 "3:	std	%%r20,0(%%sr1,%2)\n"
 "4:	std	%%r21,8(%%sr1,%2)\n"
-"	copy	%%r0, %0\n"
 "5:	\n"
-"	.section .fixup,\"ax\"\n"
-"6:	ldi	-2, %0\n"
-	FIXUP_BRANCH(5b)
-"	.previous\n"
-	ASM_EXCEPTIONTABLE_ENTRY(1b,6b)
-	ASM_EXCEPTIONTABLE_ENTRY(2b,6b)
-	ASM_EXCEPTIONTABLE_ENTRY(3b,6b)
-	ASM_EXCEPTIONTABLE_ENTRY(4b,6b)
-	: "=r" (ret)
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 5b)
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 5b)
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(3b, 5b)
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(4b, 5b)
+	: "+r" (ret)
 	: "r" (val), "r" (regs->ior), "r" (regs->isr)
-	: "r19", "r20", "r21", "r22", "r1", FIXUP_BRANCH_CLOBBER );
+	: "r19", "r20", "r21", "r22", "r1" );
 #else
     {
 	unsigned long valh=(val>>32),vall=(val&0xffffffffl);
 	__asm__ __volatile__ (
 "	mtsp	%4, %%sr1\n"
 "	zdep	%2, 29, 2, %%r19\n"
-"	dep	%%r0, 31, 2, %2\n"
+"	dep	%%r0, 31, 2, %3\n"
 "	mtsar	%%r19\n"
 "	zvdepi	-2, 32, %%r19\n"
 "1:	ldw	0(%%sr1,%3),%%r20\n"
@@ -409,23 +352,18 @@ static int emulate_std(struct pt_regs *regs, int frreg, int flop)
 "	andcm	%%r21, %%r19, %%r21\n"
 "	or	%1, %%r20, %1\n"
 "	or	%2, %%r21, %2\n"
-"3:	stw	%1,0(%%sr1,%1)\n"
+"3:	stw	%1,0(%%sr1,%3)\n"
 "4:	stw	%%r1,4(%%sr1,%3)\n"
 "5:	stw	%2,8(%%sr1,%3)\n"
-"	copy	%%r0, %0\n"
 "6:	\n"
-"	.section .fixup,\"ax\"\n"
-"7:	ldi	-2, %0\n"
-	FIXUP_BRANCH(6b)
-"	.previous\n"
-	ASM_EXCEPTIONTABLE_ENTRY(1b,7b)
-	ASM_EXCEPTIONTABLE_ENTRY(2b,7b)
-	ASM_EXCEPTIONTABLE_ENTRY(3b,7b)
-	ASM_EXCEPTIONTABLE_ENTRY(4b,7b)
-	ASM_EXCEPTIONTABLE_ENTRY(5b,7b)
-	: "=r" (ret)
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 6b)
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 6b)
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(3b, 6b)
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(4b, 6b)
+	ASM_EXCEPTIONTABLE_ENTRY_EFAULT(5b, 6b)
+	: "+r" (ret)
 	: "r" (valh), "r" (vall), "r" (regs->ior), "r" (regs->isr)
-	: "r19", "r20", "r21", "r1", FIXUP_BRANCH_CLOBBER );
+	: "r19", "r20", "r21", "r1" );
     }
 #endif
 
@@ -438,7 +376,6 @@ void handle_unaligned(struct pt_regs *regs)
 	unsigned long newbase = R1(regs->iir)?regs->gr[R1(regs->iir)]:0;
 	int modify = 0;
 	int ret = ERR_NOTHANDLED;
-	register int flop=0;	/* true if this is a flop */
 
 	__inc_irq_stat(irq_unaligned_count);
 
@@ -450,10 +387,10 @@ void handle_unaligned(struct pt_regs *regs)
 
 		if (!(current->thread.flags & PARISC_UAC_NOPRINT) &&
 			__ratelimit(&ratelimit)) {
-			char buf[256];
-			sprintf(buf, "%s(%d): unaligned access to 0x" RFMT " at ip=0x" RFMT "\n",
-				current->comm, task_pid_nr(current), regs->ior, regs->iaoq[0]);
-			printk(KERN_WARNING "%s", buf);
+			printk(KERN_WARNING "%s(%d): unaligned access to " RFMT
+				" at ip " RFMT " (iir " RFMT ")\n",
+				current->comm, task_pid_nr(current), regs->ior,
+				regs->iaoq[0], regs->iir);
 #ifdef DEBUG_UNALIGNED
 			show_regs(regs);
 #endif		
@@ -547,7 +484,7 @@ void handle_unaligned(struct pt_regs *regs)
 		ret = emulate_stw(regs, R2(regs->iir),0);
 		break;
 
-#ifdef CONFIG_PA20
+#ifdef CONFIG_64BIT
 	case OPCODE_LDD_I:
 	case OPCODE_LDDA_I:
 	case OPCODE_LDD_S:
@@ -565,13 +502,11 @@ void handle_unaligned(struct pt_regs *regs)
 	case OPCODE_FLDWS:
 	case OPCODE_FLDWXR:
 	case OPCODE_FLDWSR:
-		flop=1;
 		ret = emulate_ldw(regs,FR3(regs->iir),1);
 		break;
 
 	case OPCODE_FLDDX:
 	case OPCODE_FLDDS:
-		flop=1;
 		ret = emulate_ldd(regs,R3(regs->iir),1);
 		break;
 
@@ -579,13 +514,11 @@ void handle_unaligned(struct pt_regs *regs)
 	case OPCODE_FSTWS:
 	case OPCODE_FSTWXR:
 	case OPCODE_FSTWSR:
-		flop=1;
 		ret = emulate_stw(regs,FR3(regs->iir),1);
 		break;
 
 	case OPCODE_FSTDX:
 	case OPCODE_FSTDS:
-		flop=1;
 		ret = emulate_std(regs,R3(regs->iir),1);
 		break;
 
@@ -596,37 +529,33 @@ void handle_unaligned(struct pt_regs *regs)
 		ret = ERR_NOTHANDLED;	/* "undefined", but lets kill them. */
 		break;
 	}
-#ifdef CONFIG_PA20
 	switch (regs->iir & OPCODE2_MASK)
 	{
 	case OPCODE_FLDD_L:
-		flop=1;
 		ret = emulate_ldd(regs,R2(regs->iir),1);
 		break;
 	case OPCODE_FSTD_L:
-		flop=1;
 		ret = emulate_std(regs, R2(regs->iir),1);
 		break;
+#ifdef CONFIG_64BIT
 	case OPCODE_LDD_L:
 		ret = emulate_ldd(regs, R2(regs->iir),0);
 		break;
 	case OPCODE_STD_L:
 		ret = emulate_std(regs, R2(regs->iir),0);
 		break;
-	}
 #endif
+	}
 	switch (regs->iir & OPCODE3_MASK)
 	{
 	case OPCODE_FLDW_L:
-		flop=1;
-		ret = emulate_ldw(regs, R2(regs->iir),0);
+		ret = emulate_ldw(regs, R2(regs->iir), 1);
 		break;
 	case OPCODE_LDW_M:
-		ret = emulate_ldw(regs, R2(regs->iir),1);
+		ret = emulate_ldw(regs, R2(regs->iir), 0);
 		break;
 
 	case OPCODE_FSTW_L:
-		flop=1;
 		ret = emulate_stw(regs, R2(regs->iir),1);
 		break;
 	case OPCODE_STW_M:
@@ -673,7 +602,7 @@ void handle_unaligned(struct pt_regs *regs)
 		printk(KERN_CRIT "Unaligned handler failed, ret = %d\n", ret);
 		die_if_kernel("Unaligned data reference", regs, 28);
 
-		if (ret == ERR_PAGEFAULT)
+		if (ret == -EFAULT)
 		{
 			force_sig_fault(SIGSEGV, SEGV_MAPERR,
 					(void __user *)regs->ior);
diff --git a/arch/parisc/kernel/vdso.c b/arch/parisc/kernel/vdso.c
new file mode 100644
index 000000000000..63dc44c4c246
--- /dev/null
+++ b/arch/parisc/kernel/vdso.c
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  Copyright (c) 2022 Helge Deller <deller@gmx.de>
+ *
+ *  based on arch/s390/kernel/vdso.c which is
+ *  Copyright IBM Corp. 2008
+ *  Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
+ */
+
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/elf.h>
+#include <linux/timekeeper_internal.h>
+#include <linux/compat.h>
+#include <linux/nsproxy.h>
+#include <linux/time_namespace.h>
+#include <linux/random.h>
+
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/sections.h>
+#include <asm/vdso.h>
+#include <asm/cacheflush.h>
+
+extern char vdso32_start, vdso32_end;
+extern char vdso64_start, vdso64_end;
+
+static int vdso_mremap(const struct vm_special_mapping *sm,
+		       struct vm_area_struct *vma)
+{
+	current->mm->context.vdso_base = vma->vm_start;
+	return 0;
+}
+
+#ifdef CONFIG_64BIT
+static struct vm_special_mapping vdso64_mapping = {
+	.name = "[vdso]",
+	.mremap = vdso_mremap,
+};
+#endif
+
+static struct vm_special_mapping vdso32_mapping = {
+	.name = "[vdso]",
+	.mremap = vdso_mremap,
+};
+
+/*
+ * This is called from binfmt_elf, we create the special vma for the
+ * vDSO and insert it into the mm struct tree
+ */
+int arch_setup_additional_pages(struct linux_binprm *bprm,
+				int executable_stack)
+{
+
+	unsigned long vdso_text_start, vdso_text_len, map_base;
+	struct vm_special_mapping *vdso_mapping;
+	struct mm_struct *mm = current->mm;
+	struct vm_area_struct *vma;
+	int rc;
+
+	if (mmap_write_lock_killable(mm))
+		return -EINTR;
+
+#ifdef CONFIG_64BIT
+	if (!is_compat_task()) {
+		vdso_text_len = &vdso64_end - &vdso64_start;
+		vdso_mapping = &vdso64_mapping;
+	} else
+#endif
+	{
+		vdso_text_len = &vdso32_end - &vdso32_start;
+		vdso_mapping = &vdso32_mapping;
+	}
+
+	map_base = mm->mmap_base;
+	if (current->flags & PF_RANDOMIZE)
+		map_base -= (get_random_int() & 0x1f) * PAGE_SIZE;
+
+	vdso_text_start = get_unmapped_area(NULL, map_base, vdso_text_len, 0, 0);
+
+	/* VM_MAYWRITE for COW so gdb can set breakpoints */
+	vma = _install_special_mapping(mm, vdso_text_start, vdso_text_len,
+				       VM_READ|VM_EXEC|
+				       VM_MAYREAD|VM_MAYWRITE|VM_MAYEXEC,
+				       vdso_mapping);
+	if (IS_ERR(vma)) {
+		do_munmap(mm, vdso_text_start, PAGE_SIZE, NULL);
+		rc = PTR_ERR(vma);
+	} else {
+		current->mm->context.vdso_base = vdso_text_start;
+		rc = 0;
+	}
+
+	mmap_write_unlock(mm);
+	return rc;
+}
+
+static struct page ** __init vdso_setup_pages(void *start, void *end)
+{
+	int pages = (end - start) >> PAGE_SHIFT;
+	struct page **pagelist;
+	int i;
+
+	pagelist = kcalloc(pages + 1, sizeof(struct page *), GFP_KERNEL);
+	if (!pagelist)
+		panic("%s: Cannot allocate page list for VDSO", __func__);
+	for (i = 0; i < pages; i++)
+		pagelist[i] = virt_to_page(start + i * PAGE_SIZE);
+	return pagelist;
+}
+
+static int __init vdso_init(void)
+{
+#ifdef CONFIG_64BIT
+	vdso64_mapping.pages = vdso_setup_pages(&vdso64_start, &vdso64_end);
+#endif
+	if (IS_ENABLED(CONFIG_COMPAT) || !IS_ENABLED(CONFIG_64BIT))
+		vdso32_mapping.pages = vdso_setup_pages(&vdso32_start, &vdso32_end);
+	return 0;
+}
+arch_initcall(vdso_init);
diff --git a/arch/parisc/kernel/vdso32/Makefile b/arch/parisc/kernel/vdso32/Makefile
new file mode 100644
index 000000000000..85b1c6d261d1
--- /dev/null
+++ b/arch/parisc/kernel/vdso32/Makefile
@@ -0,0 +1,53 @@
+# List of files in the vdso, has to be asm only for now
+
+obj-vdso32 = note.o sigtramp.o restart_syscall.o
+
+# Build rules
+
+targets := $(obj-vdso32) vdso32.so
+obj-vdso32 := $(addprefix $(obj)/, $(obj-vdso32))
+
+ccflags-y := -shared -fno-common -fbuiltin -mno-fast-indirect-calls -O2 -mno-long-calls
+#  -march=1.1 -mschedule=7100LC
+ccflags-y += -nostdlib -Wl,-soname=linux-vdso32.so.1 \
+		$(call ld-option, -Wl$(comma)--hash-style=sysv)
+asflags-y := -D__VDSO32__ -s
+
+KBUILD_AFLAGS += -DBUILD_VDSO
+KBUILD_CFLAGS += -DBUILD_VDSO -DDISABLE_BRANCH_PROFILING
+
+VDSO_LIBGCC := $(shell $(CROSS32CC) -print-libgcc-file-name)
+
+obj-y += vdso32_wrapper.o
+extra-y += vdso32.lds
+CPPFLAGS_vdso32.lds += -P -C  #  -U$(ARCH)
+
+$(obj)/vdso32_wrapper.o : $(obj)/vdso32.so FORCE
+
+# Force dependency (incbin is bad)
+# link rule for the .so file, .lds has to be first
+$(obj)/vdso32.so: $(src)/vdso32.lds $(obj-vdso32) $(obj-cvdso32) $(VDSO_LIBGCC)
+	$(call if_changed,vdso32ld)
+
+# assembly rules for the .S files
+$(obj-vdso32): %.o: %.S FORCE
+	$(call if_changed_dep,vdso32as)
+
+$(obj-cvdso32): %.o: %.c FORCE
+	$(call if_changed_dep,vdso32cc)
+
+# actual build commands
+quiet_cmd_vdso32ld = VDSO32L $@
+      cmd_vdso32ld = $(CROSS32CC) $(c_flags) -Wl,-T $^ -o $@
+quiet_cmd_vdso32as = VDSO32A $@
+      cmd_vdso32as = $(CROSS32CC) $(a_flags) -c -o $@ $<
+quiet_cmd_vdso32cc = VDSO32C $@
+      cmd_vdso32cc = $(CROSS32CC) $(c_flags) -c -fPIC -mno-fast-indirect-calls -o $@ $<
+
+# Generate VDSO offsets using helper script
+gen-vdsosym := $(srctree)/$(src)/gen_vdso_offsets.sh
+quiet_cmd_vdsosym = VDSOSYM $@
+	cmd_vdsosym = $(NM) $< | $(gen-vdsosym) | LC_ALL=C sort > $@
+
+include/generated/vdso32-offsets.h: $(obj)/vdso32.so FORCE
+	$(call if_changed,vdsosym)
diff --git a/arch/nds32/kernel/vdso/gen_vdso_offsets.sh b/arch/parisc/kernel/vdso32/gen_vdso_offsets.sh
index 01924ff071ad..da39d6cff7f1 100755
--- a/arch/nds32/kernel/vdso/gen_vdso_offsets.sh
+++ b/arch/parisc/kernel/vdso32/gen_vdso_offsets.sh
@@ -1,4 +1,5 @@
 #!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
 
 #
 # Match symbols in the DSO that look like VDSO_*; produce a header file
@@ -7,9 +8,8 @@
 # Doing this inside the Makefile will break the $(filter-out) function,
 # causing Kbuild to rebuild the vdso-offsets header file every time.
 #
-# Author: Will Deacon <will.deacon@arm.com
+# Inspired by arm64 version.
 #
 
 LC_ALL=C
-sed -n -e 's/^00*/0/' -e \
-'s/^\([0-9a-fA-F]*\) . VDSO_\([a-zA-Z0-9_]*\)$/\#define vdso_offset_\2\t0x\1/p'
+sed -n 's/\([0-9a-f]*\) . __kernel_\(.*\)/\#define vdso32_offset_\2\t0x\1/p'
diff --git a/arch/parisc/kernel/vdso32/note.S b/arch/parisc/kernel/vdso32/note.S
new file mode 100644
index 000000000000..bb350918bebd
--- /dev/null
+++ b/arch/parisc/kernel/vdso32/note.S
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This supplies .note.* sections to go into the PT_NOTE inside the vDSO text.
+ * Here we can supply some information useful to userland.
+ */
+
+#include <linux/uts.h>
+#include <linux/version.h>
+
+#define ASM_ELF_NOTE_BEGIN(name, flags, vendor, type)			      \
+	.section name, flags;						      \
+	.balign 4;							      \
+	.long 1f - 0f;		/* name length */			      \
+	.long 3f - 2f;		/* data length */			      \
+	.long type;		/* note type */				      \
+0:	.asciz vendor;		/* vendor name */			      \
+1:	.balign 4;							      \
+2:
+
+#define ASM_ELF_NOTE_END						      \
+3:	.balign 4;		/* pad out section */			      \
+	.previous
+
+	ASM_ELF_NOTE_BEGIN(".note.kernel-version", "a", UTS_SYSNAME, 0)
+	.long LINUX_VERSION_CODE
+	ASM_ELF_NOTE_END
diff --git a/arch/parisc/kernel/vdso32/restart_syscall.S b/arch/parisc/kernel/vdso32/restart_syscall.S
new file mode 100644
index 000000000000..7e82008d7e40
--- /dev/null
+++ b/arch/parisc/kernel/vdso32/restart_syscall.S
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Syscall restart trampoline for 32 and 64 bits processes.
+ *
+ * Copyright (C) 2018-2022 Helge Deller <deller@gmx.de>
+ * Copyright (C) 2022 John David Anglin <dave.anglin@bell.net>
+ */
+
+#include <asm/unistd.h>
+#include <asm/vdso.h>
+
+#include <linux/linkage.h>
+
+	.text
+
+ENTRY_CFI(__kernel_restart_syscall)
+	/*
+	 * Setup a trampoline to restart the syscall
+	 * with __NR_restart_syscall
+	 */
+
+	/* load return pointer */
+#if defined(__VDSO64__)
+	ldd	0(%sp), %r31
+#elif defined(__VDSO32__)
+	ldw	0(%sp), %r31
+#endif
+
+	be	0x100(%sr2, %r0)
+	ldi	__NR_restart_syscall, %r20
+
+ENDPROC_CFI(__kernel_restart_syscall)
diff --git a/arch/parisc/kernel/vdso32/sigtramp.S b/arch/parisc/kernel/vdso32/sigtramp.S
new file mode 100644
index 000000000000..192da7077869
--- /dev/null
+++ b/arch/parisc/kernel/vdso32/sigtramp.S
@@ -0,0 +1,195 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Signal trampolines for 32 bit processes.
+ *
+ * Copyright (C) 2006 Randolph Chung <tausq@debian.org>
+ * Copyright (C) 2018-2022 Helge Deller <deller@gmx.de>
+ * Copyright (C) 2022 John David Anglin <dave.anglin@bell.net>
+ */
+#include <asm/unistd.h>
+#include <linux/linkage.h>
+#include <generated/asm-offsets.h>
+
+	.text
+
+/* Gdb expects the trampoline is on the stack and the pc is offset from
+   a 64-byte boundary by 0, 4 or 5 instructions. Since the vdso trampoline
+   is not on the stack, we need a new variant with different offsets and
+   data to tell gdb where to find the signal context on the stack.
+
+   Here we put the offset to the context data at the start of the trampoline
+   region and offset the first trampoline by 2 instructions. Please do
+   not change the trampoline as the code in gdb depends on the following
+   instruction sequence exactly.
+ */
+	.align 64
+	.word SIGFRAME_CONTEXT_REGS32
+
+/* The nop here is a hack. The dwarf2 unwind routines subtract 1 from
+   the return address to get an address in the middle of the presumed
+   call instruction. Since we don't have a call here, we artifically
+   extend the range covered by the unwind info by adding a nop before
+   the real start.
+ */
+	nop
+
+	.globl __kernel_sigtramp_rt
+	.type __kernel_sigtramp_rt, @function
+__kernel_sigtramp_rt:
+	.proc
+	.callinfo FRAME=ASM_SIGFRAME_SIZE32,CALLS,SAVE_RP
+	.entry
+
+.Lsigrt_start = . - 4
+0:	ldi	0, %r25			/* (in_syscall=0) */
+	ldi  __NR_rt_sigreturn, %r20
+	ble  0x100(%sr2, %r0)
+	nop
+
+1:	ldi	1, %r25			/* (in_syscall=1) */
+	ldi  __NR_rt_sigreturn, %r20
+	ble  0x100(%sr2, %r0)
+	nop
+.Lsigrt_end:
+	.exit
+	.procend
+	.size __kernel_sigtramp_rt,.-__kernel_sigtramp_rt
+
+
+	.section .eh_frame,"a",@progbits
+
+/* This is where the mcontext_t struct can be found on the stack.  */
+#define PTREGS SIGFRAME_CONTEXT_REGS32	/* 32-bit process offset is -672 */
+
+/* Register REGNO can be found at offset OFS of the mcontext_t structure. */
+	.macro rsave regno,ofs
+	.byte 0x05		/* DW_CFA_offset_extended */
+	.uleb128 \regno;	/*   regno */
+	.uleb128 \ofs		/*   factored offset */
+	.endm
+
+.Lcie:
+	.long .Lcie_end - .Lcie_start
+.Lcie_start:
+	.long 0			/* CIE ID */
+	.byte 1			/* Version number */
+	.stringz "zRS"		/* NUL-terminated augmentation string */
+	.uleb128 4		/* Code alignment factor */
+	.sleb128 4		/* Data alignment factor */
+	.byte 89		/* Return address register column, iaoq[0] */
+	.uleb128 1		/* Augmentation value length */
+	.byte 0x1b		/* DW_EH_PE_pcrel | DW_EH_PE_sdata4. */
+	.byte 0x0f		/* DW_CFA_def_cfa_expresion */
+	.uleb128 9f - 1f	/*   length */
+1:
+	.byte 0x8e		/*   DW_OP_breg30 */
+	.sleb128 PTREGS
+9:
+	.balign 4
+.Lcie_end:
+
+	.long .Lfde0_end - .Lfde0_start
+.Lfde0_start:
+	.long .Lfde0_start - .Lcie	/* CIE pointer. */
+	.long .Lsigrt_start - .		/* PC start, length */
+	.long .Lsigrt_end - .Lsigrt_start
+	.uleb128 0			/* Augmentation */
+
+	/* General registers */
+	rsave  1,  2
+	rsave  2,  3
+	rsave  3,  4
+	rsave  4,  5
+	rsave  5,  6
+	rsave  6,  7
+	rsave  7,  8
+	rsave  8,  9
+	rsave  9, 10
+	rsave 10, 11
+	rsave 11, 12
+	rsave 12, 13
+	rsave 13, 14
+	rsave 14, 15
+	rsave 15, 16
+	rsave 16, 17
+	rsave 17, 18
+	rsave 18, 19
+	rsave 19, 20
+	rsave 20, 21
+	rsave 21, 22
+	rsave 22, 23
+	rsave 23, 24
+	rsave 24, 25
+	rsave 25, 26
+	rsave 26, 27
+	rsave 27, 28
+	rsave 28, 29
+	rsave 29, 30
+	rsave 30, 31
+	rsave 31, 32
+
+	/* Floating-point registers */
+	rsave 32, 42
+	rsave 33, 43
+	rsave 34, 44
+	rsave 35, 45
+	rsave 36, 46
+	rsave 37, 47
+	rsave 38, 48
+	rsave 39, 49
+	rsave 40, 50
+	rsave 41, 51
+	rsave 42, 52
+	rsave 43, 53
+	rsave 44, 54
+	rsave 45, 55
+	rsave 46, 56
+	rsave 47, 57
+	rsave 48, 58
+	rsave 49, 59
+	rsave 50, 60
+	rsave 51, 61
+	rsave 52, 62
+	rsave 53, 63
+	rsave 54, 64
+	rsave 55, 65
+	rsave 56, 66
+	rsave 57, 67
+	rsave 58, 68
+	rsave 59, 69
+	rsave 60, 70
+	rsave 61, 71
+	rsave 62, 72
+	rsave 63, 73
+	rsave 64, 74
+	rsave 65, 75
+	rsave 66, 76
+	rsave 67, 77
+	rsave 68, 78
+	rsave 69, 79
+	rsave 70, 80
+	rsave 71, 81
+	rsave 72, 82
+	rsave 73, 83
+	rsave 74, 84
+	rsave 75, 85
+	rsave 76, 86
+	rsave 77, 87
+	rsave 78, 88
+	rsave 79, 89
+	rsave 80, 90
+	rsave 81, 91
+	rsave 82, 92
+	rsave 83, 93
+	rsave 84, 94
+	rsave 85, 95
+	rsave 86, 96
+	rsave 87, 97
+
+	/* SAR register */
+	rsave 88, 102
+
+	/* iaoq[0] return address register */
+	rsave 89, 100
+	.balign 4
+.Lfde0_end:
diff --git a/arch/parisc/kernel/vdso32/vdso32.lds.S b/arch/parisc/kernel/vdso32/vdso32.lds.S
new file mode 100644
index 000000000000..d4aff3af5262
--- /dev/null
+++ b/arch/parisc/kernel/vdso32/vdso32.lds.S
@@ -0,0 +1,111 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This is the infamous ld script for the 32 bits vdso library
+ */
+#include <asm/vdso.h>
+#include <asm/page.h>
+
+/* Default link addresses for the vDSOs */
+OUTPUT_FORMAT("elf32-hppa-linux")
+OUTPUT_ARCH(hppa)
+ENTRY(_start)
+
+SECTIONS
+{
+  . = VDSO_LBASE + SIZEOF_HEADERS;
+  .hash           : { *(.hash) }			:text
+  .gnu.hash       : { *(.gnu.hash) }
+  .dynsym         : { *(.dynsym) }
+  .dynstr         : { *(.dynstr) }
+  .gnu.version    : { *(.gnu.version) }
+  .gnu.version_d  : { *(.gnu.version_d) }
+  .gnu.version_r  : { *(.gnu.version_r) }
+
+  .note		  : { *(.note.*) } 			:text	:note
+
+  . = ALIGN (16);
+  .text :
+  {
+    *(.text .stub .text.* .gnu.linkonce.t.*)
+  }
+  PROVIDE (__etext = .);
+  PROVIDE (_etext = .);
+  PROVIDE (etext = .);
+
+  /* Other stuff is appended to the text segment: */
+  .rodata		: { *(.rodata .rodata.* .gnu.linkonce.r.*) }
+  .rodata1		: { *(.rodata1) }
+  .rodata2		: { *(.data.rel.ro) }
+
+  .eh_frame_hdr		: { *(.eh_frame_hdr) }		:text	:eh_frame_hdr
+  .eh_frame		: { KEEP (*(.eh_frame)) }	:text
+  .gcc_except_table	: { *(.gcc_except_table) }
+  .fixup		: { *(.fixup) }
+
+  .dynamic		: { *(.dynamic) }		:text	:dynamic
+  .plt : { *(.plt) }
+  .got : { *(.got) }
+
+  _end = .;
+  __end = .;
+  PROVIDE (end = .);
+
+
+  /* Stabs debugging sections are here too
+   */
+  .stab 0 : { *(.stab) }
+  .stabstr 0 : { *(.stabstr) }
+  .stab.excl 0 : { *(.stab.excl) }
+  .stab.exclstr 0 : { *(.stab.exclstr) }
+  .stab.index 0 : { *(.stab.index) }
+  .stab.indexstr 0 : { *(.stab.indexstr) }
+  .comment 0 : { *(.comment) }
+  .debug 0 : { *(.debug) }
+  .line 0 : { *(.line) }
+
+  .debug_srcinfo 0 : { *(.debug_srcinfo) }
+  .debug_sfnames 0 : { *(.debug_sfnames) }
+
+  .debug_aranges 0 : { *(.debug_aranges) }
+  .debug_pubnames 0 : { *(.debug_pubnames) }
+
+  .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) }
+  .debug_abbrev 0 : { *(.debug_abbrev) }
+  .debug_line 0 : { *(.debug_line) }
+  .debug_frame 0 : { *(.debug_frame) }
+  .debug_str 0 : { *(.debug_str) }
+  .debug_loc 0 : { *(.debug_loc) }
+  .debug_macinfo 0 : { *(.debug_macinfo) }
+
+  .debug_weaknames 0 : { *(.debug_weaknames) }
+  .debug_funcnames 0 : { *(.debug_funcnames) }
+  .debug_typenames 0 : { *(.debug_typenames) }
+  .debug_varnames 0 : { *(.debug_varnames) }
+
+  /DISCARD/ : { *(.note.GNU-stack) }
+  /DISCARD/ : { *(.data .data.* .gnu.linkonce.d.* .sdata*) }
+  /DISCARD/ : { *(.bss .sbss .dynbss .dynsbss) }
+}
+
+
+PHDRS
+{
+  text PT_LOAD FILEHDR PHDRS FLAGS(5); /* PF_R|PF_X */
+  note PT_NOTE FLAGS(4); /* PF_R */
+  dynamic PT_DYNAMIC FLAGS(4); /* PF_R */
+  eh_frame_hdr PT_GNU_EH_FRAME;
+}
+
+
+/*
+ * This controls what symbols we export from the DSO.
+ */
+VERSION
+{
+  VDSO_VERSION_STRING {
+    global:
+	__kernel_sigtramp_rt32;
+	__kernel_restart_syscall32;
+    local: *;
+  };
+}
diff --git a/arch/parisc/kernel/vdso32/vdso32_wrapper.S b/arch/parisc/kernel/vdso32/vdso32_wrapper.S
new file mode 100644
index 000000000000..5ac06093e8ec
--- /dev/null
+++ b/arch/parisc/kernel/vdso32/vdso32_wrapper.S
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#include <linux/linkage.h>
+#include <asm/page.h>
+
+	__PAGE_ALIGNED_DATA
+
+	.globl vdso32_start, vdso32_end
+	.balign PAGE_SIZE
+vdso32_start:
+	.incbin "arch/parisc/kernel/vdso32/vdso32.so"
+	.balign PAGE_SIZE
+vdso32_end:
+
+	.previous
diff --git a/arch/parisc/kernel/vdso64/Makefile b/arch/parisc/kernel/vdso64/Makefile
new file mode 100644
index 000000000000..a30f5ec5eb4b
--- /dev/null
+++ b/arch/parisc/kernel/vdso64/Makefile
@@ -0,0 +1,48 @@
+# List of files in the vdso, has to be asm only for now
+
+obj-vdso64 = note.o sigtramp.o restart_syscall.o
+
+# Build rules
+
+targets := $(obj-vdso64) vdso64.so
+obj-vdso64 := $(addprefix $(obj)/, $(obj-vdso64))
+
+
+ccflags-y := -shared -fno-common -fno-builtin
+ccflags-y += -nostdlib -Wl,-soname=linux-vdso64.so.1 \
+		$(call ld-option, -Wl$(comma)--hash-style=sysv)
+asflags-y := -D__VDSO64__ -s
+
+KBUILD_AFLAGS += -DBUILD_VDSO
+KBUILD_CFLAGS += -DBUILD_VDSO -DDISABLE_BRANCH_PROFILING
+
+VDSO_LIBGCC := $(shell $(CC) -print-libgcc-file-name)
+
+obj-y += vdso64_wrapper.o
+extra-y += vdso64.lds
+CPPFLAGS_vdso64.lds += -P -C -U$(ARCH)
+
+$(obj)/vdso64_wrapper.o : $(obj)/vdso64.so FORCE
+
+# Force dependency (incbin is bad)
+# link rule for the .so file, .lds has to be first
+$(obj)/vdso64.so: $(src)/vdso64.lds $(obj-vdso64) $(VDSO_LIBGCC)
+	$(call if_changed,vdso64ld)
+
+# assembly rules for the .S files
+$(obj-vdso64): %.o: %.S FORCE
+	$(call if_changed_dep,vdso64as)
+
+# actual build commands
+quiet_cmd_vdso64ld = VDSO64L $@
+      cmd_vdso64ld = $(CC) $(c_flags) -Wl,-T $^ -o $@
+quiet_cmd_vdso64as = VDSO64A $@
+      cmd_vdso64as = $(CC) $(a_flags) -c -o $@ $<
+
+# Generate VDSO offsets using helper script
+gen-vdsosym := $(srctree)/$(src)/gen_vdso_offsets.sh
+quiet_cmd_vdsosym = VDSOSYM $@
+	cmd_vdsosym = $(NM) $< | $(gen-vdsosym) | LC_ALL=C sort > $@
+
+include/generated/vdso64-offsets.h: $(obj)/vdso64.so FORCE
+	$(call if_changed,vdsosym)
diff --git a/arch/parisc/kernel/vdso64/gen_vdso_offsets.sh b/arch/parisc/kernel/vdso64/gen_vdso_offsets.sh
new file mode 100755
index 000000000000..37f05cb38dad
--- /dev/null
+++ b/arch/parisc/kernel/vdso64/gen_vdso_offsets.sh
@@ -0,0 +1,15 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+
+#
+# Match symbols in the DSO that look like VDSO_*; produce a header file
+# of constant offsets into the shared object.
+#
+# Doing this inside the Makefile will break the $(filter-out) function,
+# causing Kbuild to rebuild the vdso-offsets header file every time.
+#
+# Inspired by arm64 version.
+#
+
+LC_ALL=C
+sed -n 's/\([0-9a-f]*\) . __kernel_\(.*\)/\#define vdso64_offset_\2\t0x\1/p'
diff --git a/arch/parisc/kernel/vdso64/note.S b/arch/parisc/kernel/vdso64/note.S
new file mode 100644
index 000000000000..bd1fa23597d6
--- /dev/null
+++ b/arch/parisc/kernel/vdso64/note.S
@@ -0,0 +1,2 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#include "../vdso32/note.S"
diff --git a/arch/parisc/kernel/vdso64/restart_syscall.S b/arch/parisc/kernel/vdso64/restart_syscall.S
new file mode 100644
index 000000000000..83004451f6b1
--- /dev/null
+++ b/arch/parisc/kernel/vdso64/restart_syscall.S
@@ -0,0 +1,3 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#include "../vdso32/restart_syscall.S"
diff --git a/arch/parisc/kernel/vdso64/sigtramp.S b/arch/parisc/kernel/vdso64/sigtramp.S
new file mode 100644
index 000000000000..66a6d2b241e1
--- /dev/null
+++ b/arch/parisc/kernel/vdso64/sigtramp.S
@@ -0,0 +1,166 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Signal trampolines for 64 bit processes.
+ *
+ * Copyright (C) 2006 Randolph Chung <tausq@debian.org>
+ * Copyright (C) 2018-2022 Helge Deller <deller@gmx.de>
+ * Copyright (C) 2022 John David Anglin <dave.anglin@bell.net>
+ */
+#include <asm/unistd.h>
+#include <linux/linkage.h>
+#include <generated/asm-offsets.h>
+
+	.text
+
+/* Gdb expects the trampoline is on the stack and the pc is offset from
+   a 64-byte boundary by 0, 4 or 5 instructions. Since the vdso trampoline
+   is not on the stack, we need a new variant with different offsets and
+   data to tell gdb where to find the signal context on the stack.
+
+   Here we put the offset to the context data at the start of the trampoline
+   region and offset the first trampoline by 2 instructions. Please do
+   not change the trampoline as the code in gdb depends on the following
+   instruction sequence exactly.
+ */
+	.align 64
+	.word SIGFRAME_CONTEXT_REGS
+
+/* The nop here is a hack. The dwarf2 unwind routines subtract 1 from
+   the return address to get an address in the middle of the presumed
+   call instruction. Since we don't have a call here, we artifically
+   extend the range covered by the unwind info by adding a nop before
+   the real start.
+ */
+	nop
+
+	.globl __kernel_sigtramp_rt
+	.type __kernel_sigtramp_rt, @function
+__kernel_sigtramp_rt:
+	.proc
+	.callinfo FRAME=ASM_SIGFRAME_SIZE,CALLS,SAVE_RP
+	.entry
+
+.Lsigrt_start = . - 4
+0:	ldi	0, %r25			/* (in_syscall=0) */
+	ldi  __NR_rt_sigreturn, %r20
+	ble  0x100(%sr2, %r0)
+	nop
+
+1:	ldi	1, %r25			/* (in_syscall=1) */
+	ldi  __NR_rt_sigreturn, %r20
+	ble  0x100(%sr2, %r0)
+	nop
+.Lsigrt_end:
+	.exit
+	.procend
+	.size __kernel_sigtramp_rt,.-__kernel_sigtramp_rt
+
+	.section .eh_frame,"a",@progbits
+
+/* This is where the mcontext_t struct can be found on the stack.  */
+#define PTREGS SIGFRAME_CONTEXT_REGS	/* 64-bit process offset is -720 */
+
+/* Register REGNO can be found at offset OFS of the mcontext_t structure. */
+	.macro rsave regno,ofs
+	.byte 0x05		/* DW_CFA_offset_extended */
+	.uleb128 \regno;	/*   regno */
+	.uleb128 \ofs		/*   factored offset */
+	.endm
+
+.Lcie:
+	.long .Lcie_end - .Lcie_start
+.Lcie_start:
+	.long 0			/* CIE ID */
+	.byte 1			/* Version number */
+	.stringz "zRS"		/* NUL-terminated augmentation string */
+	.uleb128 4		/* Code alignment factor */
+	.sleb128 8		/* Data alignment factor */
+	.byte 61		/* Return address register column, iaoq[0] */
+	.uleb128 1		/* Augmentation value length */
+	.byte 0x1b		/* DW_EH_PE_pcrel | DW_EH_PE_sdata4. */
+	.byte 0x0f		/* DW_CFA_def_cfa_expresion */
+	.uleb128 9f - 1f	/*   length */
+1:
+	.byte 0x8e		/*   DW_OP_breg30 */
+	.sleb128 PTREGS
+9:
+	.balign 8
+.Lcie_end:
+
+	.long .Lfde0_end - .Lfde0_start
+.Lfde0_start:
+	.long .Lfde0_start - .Lcie	/* CIE pointer. */
+	.long .Lsigrt_start - .		/* PC start, length */
+	.long .Lsigrt_end - .Lsigrt_start
+	.uleb128 0			/* Augmentation */
+
+	/* General registers */
+	rsave  1,  2
+	rsave  2,  3
+	rsave  3,  4
+	rsave  4,  5
+	rsave  5,  6
+	rsave  6,  7
+	rsave  7,  8
+	rsave  8,  9
+	rsave  9, 10
+	rsave 10, 11
+	rsave 11, 12
+	rsave 12, 13
+	rsave 13, 14
+	rsave 14, 15
+	rsave 15, 16
+	rsave 16, 17
+	rsave 17, 18
+	rsave 18, 19
+	rsave 19, 20
+	rsave 20, 21
+	rsave 21, 22
+	rsave 22, 23
+	rsave 23, 24
+	rsave 24, 25
+	rsave 25, 26
+	rsave 26, 27
+	rsave 27, 28
+	rsave 28, 29
+	rsave 29, 30
+	rsave 30, 31
+	rsave 31, 32
+
+	/* Floating-point registers */
+	rsave 32, 36
+	rsave 33, 37
+	rsave 34, 38
+	rsave 35, 39
+	rsave 36, 40
+	rsave 37, 41
+	rsave 38, 42
+	rsave 39, 43
+	rsave 40, 44
+	rsave 41, 45
+	rsave 42, 46
+	rsave 43, 47
+	rsave 44, 48
+	rsave 45, 49
+	rsave 46, 50
+	rsave 47, 51
+	rsave 48, 52
+	rsave 49, 53
+	rsave 50, 54
+	rsave 51, 55
+	rsave 52, 56
+	rsave 53, 57
+	rsave 54, 58
+	rsave 55, 59
+	rsave 56, 60
+	rsave 57, 61
+	rsave 58, 62
+	rsave 59, 63
+
+	/* SAR register */
+	rsave 60, 67
+
+	/* iaoq[0] return address register */
+	rsave 61, 65
+	.balign 8
+.Lfde0_end:
diff --git a/arch/parisc/kernel/vdso64/vdso64.lds.S b/arch/parisc/kernel/vdso64/vdso64.lds.S
new file mode 100644
index 000000000000..de1fb4b19286
--- /dev/null
+++ b/arch/parisc/kernel/vdso64/vdso64.lds.S
@@ -0,0 +1,109 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This is the infamous ld script for the 64 bits vdso library
+ */
+#include <asm/vdso.h>
+
+/* Default link addresses for the vDSOs */
+OUTPUT_FORMAT("elf64-hppa-linux")
+OUTPUT_ARCH(hppa:hppa2.0w)
+ENTRY(_start)
+
+SECTIONS
+{
+  . = VDSO_LBASE + SIZEOF_HEADERS;
+  .hash           : { *(.hash) }			:text
+  .gnu.hash       : { *(.gnu.hash) }
+  .dynsym         : { *(.dynsym) }
+  .dynstr         : { *(.dynstr) }
+  .gnu.version    : { *(.gnu.version) }
+  .gnu.version_d  : { *(.gnu.version_d) }
+  .gnu.version_r  : { *(.gnu.version_r) }
+
+  .note		  : { *(.note.*) } 			:text	:note
+
+  . = ALIGN (16);
+  .text :
+  {
+    *(.text .stub .text.* .gnu.linkonce.t.*)
+  }
+  PROVIDE (__etext = .);
+  PROVIDE (_etext = .);
+  PROVIDE (etext = .);
+
+  /* Other stuff is appended to the text segment: */
+  .rodata		: { *(.rodata .rodata.* .gnu.linkonce.r.*) }
+  .rodata1		: { *(.rodata1) }
+
+  .eh_frame_hdr		: { *(.eh_frame_hdr) }		:text	:eh_frame_hdr
+  .eh_frame		: { KEEP (*(.eh_frame)) }	:text
+  .gcc_except_table	: { *(.gcc_except_table) }
+  .fixup		: { *(.fixup) }
+
+  .dynamic		: { *(.dynamic) }		:text	:dynamic
+  .plt : { *(.plt) }
+  .got : { *(.got) }
+
+  _end = .;
+  __end = .;
+  PROVIDE (end = .);
+
+
+  /* Stabs debugging sections are here too
+   */
+  .stab 0 : { *(.stab) }
+  .stabstr 0 : { *(.stabstr) }
+  .stab.excl 0 : { *(.stab.excl) }
+  .stab.exclstr 0 : { *(.stab.exclstr) }
+  .stab.index 0 : { *(.stab.index) }
+  .stab.indexstr 0 : { *(.stab.indexstr) }
+  .comment 0 : { *(.comment) }
+  .debug 0 : { *(.debug) }
+  .line 0 : { *(.line) }
+
+  .debug_srcinfo 0 : { *(.debug_srcinfo) }
+  .debug_sfnames 0 : { *(.debug_sfnames) }
+
+  .debug_aranges 0 : { *(.debug_aranges) }
+  .debug_pubnames 0 : { *(.debug_pubnames) }
+
+  .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) }
+  .debug_abbrev 0 : { *(.debug_abbrev) }
+  .debug_line 0 : { *(.debug_line) }
+  .debug_frame 0 : { *(.debug_frame) }
+  .debug_str 0 : { *(.debug_str) }
+  .debug_loc 0 : { *(.debug_loc) }
+  .debug_macinfo 0 : { *(.debug_macinfo) }
+
+  .debug_weaknames 0 : { *(.debug_weaknames) }
+  .debug_funcnames 0 : { *(.debug_funcnames) }
+  .debug_typenames 0 : { *(.debug_typenames) }
+  .debug_varnames 0 : { *(.debug_varnames) }
+
+  /DISCARD/ : { *(.note.GNU-stack) }
+  /DISCARD/ : { *(.data .data.* .gnu.linkonce.d.* .sdata*) }
+  /DISCARD/ : { *(.bss .sbss .dynbss .dynsbss) }
+}
+
+
+PHDRS
+{
+  text PT_LOAD FILEHDR PHDRS FLAGS(5); /* PF_R|PF_X */
+  note PT_NOTE FLAGS(4); /* PF_R */
+  dynamic PT_DYNAMIC FLAGS(4); /* PF_R */
+  eh_frame_hdr PT_GNU_EH_FRAME;
+}
+
+
+/*
+ * This controls what symbols we export from the DSO.
+ */
+VERSION
+{
+  VDSO_VERSION_STRING {
+    global:
+	__kernel_sigtramp_rt64;
+	__kernel_restart_syscall64;
+    local: *;
+  };
+}
diff --git a/arch/parisc/kernel/vdso64/vdso64_wrapper.S b/arch/parisc/kernel/vdso64/vdso64_wrapper.S
new file mode 100644
index 000000000000..66f929482d3d
--- /dev/null
+++ b/arch/parisc/kernel/vdso64/vdso64_wrapper.S
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#include <linux/linkage.h>
+#include <asm/page.h>
+
+	__PAGE_ALIGNED_DATA
+
+	.globl vdso64_start, vdso64_end
+	.balign PAGE_SIZE
+vdso64_start:
+	.incbin "arch/parisc/kernel/vdso64/vdso64.so"
+	.balign PAGE_SIZE
+vdso64_end:
+
+	.previous
diff --git a/arch/parisc/lib/iomap.c b/arch/parisc/lib/iomap.c
index 367f6397bda7..860385058085 100644
--- a/arch/parisc/lib/iomap.c
+++ b/arch/parisc/lib/iomap.c
@@ -346,6 +346,16 @@ u64 ioread64be(const void __iomem *addr)
 	return *((u64 *)addr);
 }
 
+u64 ioread64_lo_hi(const void __iomem *addr)
+{
+	u32 low, high;
+
+	low = ioread32(addr);
+	high = ioread32(addr + sizeof(u32));
+
+	return low + ((u64)high << 32);
+}
+
 u64 ioread64_hi_lo(const void __iomem *addr)
 {
 	u32 low, high;
@@ -419,6 +429,12 @@ void iowrite64be(u64 datum, void __iomem *addr)
 	}
 }
 
+void iowrite64_lo_hi(u64 val, void __iomem *addr)
+{
+	iowrite32(val, addr);
+	iowrite32(val >> 32, addr + sizeof(u32));
+}
+
 void iowrite64_hi_lo(u64 val, void __iomem *addr)
 {
 	iowrite32(val >> 32, addr + sizeof(u32));
@@ -530,6 +546,7 @@ EXPORT_SYMBOL(ioread32);
 EXPORT_SYMBOL(ioread32be);
 EXPORT_SYMBOL(ioread64);
 EXPORT_SYMBOL(ioread64be);
+EXPORT_SYMBOL(ioread64_lo_hi);
 EXPORT_SYMBOL(ioread64_hi_lo);
 EXPORT_SYMBOL(iowrite8);
 EXPORT_SYMBOL(iowrite16);
@@ -538,6 +555,7 @@ EXPORT_SYMBOL(iowrite32);
 EXPORT_SYMBOL(iowrite32be);
 EXPORT_SYMBOL(iowrite64);
 EXPORT_SYMBOL(iowrite64be);
+EXPORT_SYMBOL(iowrite64_lo_hi);
 EXPORT_SYMBOL(iowrite64_hi_lo);
 EXPORT_SYMBOL(ioread8_rep);
 EXPORT_SYMBOL(ioread16_rep);
diff --git a/arch/parisc/lib/memcpy.c b/arch/parisc/lib/memcpy.c
index ea70a0e08321..5fc0c852c84c 100644
--- a/arch/parisc/lib/memcpy.c
+++ b/arch/parisc/lib/memcpy.c
@@ -13,8 +13,8 @@
 #include <linux/compiler.h>
 #include <linux/uaccess.h>
 
-#define get_user_space() (uaccess_kernel() ? 0 : mfsp(3))
-#define get_kernel_space() (0)
+#define get_user_space()	mfsp(SR_USER)
+#define get_kernel_space()	SR_KERNEL
 
 /* Returns 0 for success, otherwise, returns number of bytes not transferred. */
 extern unsigned long pa_memcpy(void *dst, const void *src,
@@ -23,8 +23,8 @@ extern unsigned long pa_memcpy(void *dst, const void *src,
 unsigned long raw_copy_to_user(void __user *dst, const void *src,
 			       unsigned long len)
 {
-	mtsp(get_kernel_space(), 1);
-	mtsp(get_user_space(), 2);
+	mtsp(get_kernel_space(), SR_TEMP1);
+	mtsp(get_user_space(), SR_TEMP2);
 	return pa_memcpy((void __force *)dst, src, len);
 }
 EXPORT_SYMBOL(raw_copy_to_user);
@@ -32,16 +32,16 @@ EXPORT_SYMBOL(raw_copy_to_user);
 unsigned long raw_copy_from_user(void *dst, const void __user *src,
 			       unsigned long len)
 {
-	mtsp(get_user_space(), 1);
-	mtsp(get_kernel_space(), 2);
+	mtsp(get_user_space(), SR_TEMP1);
+	mtsp(get_kernel_space(), SR_TEMP2);
 	return pa_memcpy(dst, (void __force *)src, len);
 }
 EXPORT_SYMBOL(raw_copy_from_user);
 
 void * memcpy(void * dst,const void *src, size_t count)
 {
-	mtsp(get_kernel_space(), 1);
-	mtsp(get_kernel_space(), 2);
+	mtsp(get_kernel_space(), SR_TEMP1);
+	mtsp(get_kernel_space(), SR_TEMP2);
 	pa_memcpy(dst, src, count);
 	return dst;
 }
diff --git a/arch/parisc/mm/fault.c b/arch/parisc/mm/fault.c
index e9eabf8f14d7..f114e102aaf2 100644
--- a/arch/parisc/mm/fault.c
+++ b/arch/parisc/mm/fault.c
@@ -425,3 +425,92 @@ out_of_memory:
 	}
 	pagefault_out_of_memory();
 }
+
+/* Handle non-access data TLB miss faults.
+ *
+ * For probe instructions, accesses to userspace are considered allowed
+ * if they lie in a valid VMA and the access type matches. We are not
+ * allowed to handle MM faults here so there may be situations where an
+ * actual access would fail even though a probe was successful.
+ */
+int
+handle_nadtlb_fault(struct pt_regs *regs)
+{
+	unsigned long insn = regs->iir;
+	int breg, treg, xreg, val = 0;
+	struct vm_area_struct *vma, *prev_vma;
+	struct task_struct *tsk;
+	struct mm_struct *mm;
+	unsigned long address;
+	unsigned long acc_type;
+
+	switch (insn & 0x380) {
+	case 0x280:
+		/* FDC instruction */
+		fallthrough;
+	case 0x380:
+		/* PDC and FIC instructions */
+		if (printk_ratelimit()) {
+			pr_warn("BUG: nullifying cache flush/purge instruction\n");
+			show_regs(regs);
+		}
+		if (insn & 0x20) {
+			/* Base modification */
+			breg = (insn >> 21) & 0x1f;
+			xreg = (insn >> 16) & 0x1f;
+			if (breg && xreg)
+				regs->gr[breg] += regs->gr[xreg];
+		}
+		regs->gr[0] |= PSW_N;
+		return 1;
+
+	case 0x180:
+		/* PROBE instruction */
+		treg = insn & 0x1f;
+		if (regs->isr) {
+			tsk = current;
+			mm = tsk->mm;
+			if (mm) {
+				/* Search for VMA */
+				address = regs->ior;
+				mmap_read_lock(mm);
+				vma = find_vma_prev(mm, address, &prev_vma);
+				mmap_read_unlock(mm);
+
+				/*
+				 * Check if access to the VMA is okay.
+				 * We don't allow for stack expansion.
+				 */
+				acc_type = (insn & 0x40) ? VM_WRITE : VM_READ;
+				if (vma
+				    && address >= vma->vm_start
+				    && (vma->vm_flags & acc_type) == acc_type)
+					val = 1;
+			}
+		}
+		if (treg)
+			regs->gr[treg] = val;
+		regs->gr[0] |= PSW_N;
+		return 1;
+
+	case 0x300:
+		/* LPA instruction */
+		if (insn & 0x20) {
+			/* Base modification */
+			breg = (insn >> 21) & 0x1f;
+			xreg = (insn >> 16) & 0x1f;
+			if (breg && xreg)
+				regs->gr[breg] += regs->gr[xreg];
+		}
+		treg = insn & 0x1f;
+		if (treg)
+			regs->gr[treg] = 0;
+		regs->gr[0] |= PSW_N;
+		return 1;
+
+	default:
+		break;
+	}
+
+	return 0;
+}
diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c
index 1ae31db9988f..1dc2e88e7b04 100644
--- a/arch/parisc/mm/init.c
+++ b/arch/parisc/mm/init.c
@@ -337,9 +337,9 @@ static void __init setup_bootmem(void)
 
 static bool kernel_set_to_readonly;
 
-static void __init map_pages(unsigned long start_vaddr,
-			     unsigned long start_paddr, unsigned long size,
-			     pgprot_t pgprot, int force)
+static void __ref map_pages(unsigned long start_vaddr,
+			    unsigned long start_paddr, unsigned long size,
+			    pgprot_t pgprot, int force)
 {
 	pmd_t *pmd;
 	pte_t *pg_table;
@@ -449,7 +449,7 @@ void __init set_kernel_text_rw(int enable_read_write)
 	flush_tlb_all();
 }
 
-void __ref free_initmem(void)
+void free_initmem(void)
 {
 	unsigned long init_begin = (unsigned long)__init_begin;
 	unsigned long init_end = (unsigned long)__init_end;
@@ -463,7 +463,6 @@ void __ref free_initmem(void)
 	/* The init text pages are marked R-X.  We have to
 	 * flush the icache and mark them RW-
 	 *
-	 * This is tricky, because map_pages is in the init section.
 	 * Do a dummy remap of the data section first (the data
 	 * section is already PAGE_KERNEL) to pull in the TLB entries
 	 * for map_kernel */
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index b779603978e1..7e7387bd7d53 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -108,6 +108,7 @@ config PPC
 	select ARCH_ENABLE_MEMORY_HOTPLUG
 	select ARCH_ENABLE_MEMORY_HOTREMOVE
 	select ARCH_HAS_COPY_MC			if PPC64
+	select ARCH_HAS_CURRENT_STACK_POINTER
 	select ARCH_HAS_DEBUG_VIRTUAL
 	select ARCH_HAS_DEBUG_VM_PGTABLE
 	select ARCH_HAS_DEBUG_WX		if STRICT_KERNEL_RWX
diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig
index d4be64f190ff..fa707de761be 100644
--- a/arch/powerpc/configs/linkstation_defconfig
+++ b/arch/powerpc/configs/linkstation_defconfig
@@ -120,7 +120,6 @@ CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
 CONFIG_CIFS=m
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_932=m
diff --git a/arch/powerpc/configs/mvme5100_defconfig b/arch/powerpc/configs/mvme5100_defconfig
index 1fed6be95d53..d1c7fd5bf34b 100644
--- a/arch/powerpc/configs/mvme5100_defconfig
+++ b/arch/powerpc/configs/mvme5100_defconfig
@@ -101,7 +101,6 @@ CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
 CONFIG_CIFS=m
 CONFIG_NLS=y
 CONFIG_NLS_CODEPAGE_437=m
diff --git a/arch/powerpc/include/asm/agp.h b/arch/powerpc/include/asm/agp.h
index b29b1186f819..6b6485c988dd 100644
--- a/arch/powerpc/include/asm/agp.h
+++ b/arch/powerpc/include/asm/agp.h
@@ -5,8 +5,8 @@
 
 #include <asm/io.h>
 
-#define map_page_into_agp(page)
-#define unmap_page_from_agp(page)
+#define map_page_into_agp(page) do {} while (0)
+#define unmap_page_from_agp(page) do {} while (0)
 #define flush_agp_cache() mb()
 
 /* GATT allocation. Returns/accepts GATT kernel virtual address. */
diff --git a/arch/powerpc/include/asm/book3s/32/pgtable.h b/arch/powerpc/include/asm/book3s/32/pgtable.h
index f8b94f78403f..95e06f2a8e23 100644
--- a/arch/powerpc/include/asm/book3s/32/pgtable.h
+++ b/arch/powerpc/include/asm/book3s/32/pgtable.h
@@ -372,8 +372,8 @@ static inline void __ptep_set_access_flags(struct vm_area_struct *vma,
 #define __HAVE_ARCH_PTE_SAME
 #define pte_same(A,B)	(((pte_val(A) ^ pte_val(B)) & ~_PAGE_HASHPTE) == 0)
 
-#define pmd_page(pmd)		\
-	pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT)
+#define pmd_pfn(pmd)		(pmd_val(pmd) >> PAGE_SHIFT)
+#define pmd_page(pmd)		pfn_to_page(pmd_pfn(pmd))
 
 /*
  * Encode and decode a swap entry.
diff --git a/arch/powerpc/include/asm/book3s/64/mmu.h b/arch/powerpc/include/asm/book3s/64/mmu.h
index ba5b1becf518..006cbec70ffe 100644
--- a/arch/powerpc/include/asm/book3s/64/mmu.h
+++ b/arch/powerpc/include/asm/book3s/64/mmu.h
@@ -202,7 +202,6 @@ static inline struct subpage_prot_table *mm_ctx_subpage_prot(mm_context_t *ctx)
 /*
  * The current system page and segment sizes
  */
-extern int mmu_linear_psize;
 extern int mmu_virtual_psize;
 extern int mmu_vmalloc_psize;
 extern int mmu_io_psize;
@@ -213,6 +212,7 @@ extern int mmu_io_psize;
 #define mmu_virtual_psize MMU_PAGE_4K
 #endif
 #endif
+extern int mmu_linear_psize;
 extern int mmu_vmemmap_psize;
 
 /* MMU initialization */
diff --git a/arch/powerpc/include/asm/fadump-internal.h b/arch/powerpc/include/asm/fadump-internal.h
index 52189928ec08..81bcb9abb371 100644
--- a/arch/powerpc/include/asm/fadump-internal.h
+++ b/arch/powerpc/include/asm/fadump-internal.h
@@ -19,11 +19,6 @@
 
 #define memblock_num_regions(memblock_type)	(memblock.memblock_type.cnt)
 
-/* Alignment per CMA requirement. */
-#define FADUMP_CMA_ALIGNMENT	(PAGE_SIZE <<				\
-				 max_t(unsigned long, MAX_ORDER - 1,	\
-				 pageblock_order))
-
 /* FAD commands */
 #define FADUMP_REGISTER			1
 #define FADUMP_UNREGISTER		2
diff --git a/arch/powerpc/include/asm/kexec_ranges.h b/arch/powerpc/include/asm/kexec_ranges.h
index 7a90000f8d15..f83866a19e87 100644
--- a/arch/powerpc/include/asm/kexec_ranges.h
+++ b/arch/powerpc/include/asm/kexec_ranges.h
@@ -9,7 +9,7 @@ struct crash_mem *realloc_mem_ranges(struct crash_mem **mem_ranges);
 int add_mem_range(struct crash_mem **mem_ranges, u64 base, u64 size);
 int add_tce_mem_ranges(struct crash_mem **mem_ranges);
 int add_initrd_mem_range(struct crash_mem **mem_ranges);
-#ifdef CONFIG_PPC_BOOK3S_64
+#ifdef CONFIG_PPC_64S_HASH_MMU
 int add_htab_mem_range(struct crash_mem **mem_ranges);
 #else
 static inline int add_htab_mem_range(struct crash_mem **mem_ranges)
diff --git a/arch/powerpc/include/asm/mmu_context.h b/arch/powerpc/include/asm/mmu_context.h
index fd277b15635c..b8527a74bd4d 100644
--- a/arch/powerpc/include/asm/mmu_context.h
+++ b/arch/powerpc/include/asm/mmu_context.h
@@ -21,7 +21,6 @@ extern void destroy_context(struct mm_struct *mm);
 #ifdef CONFIG_SPAPR_TCE_IOMMU
 struct mm_iommu_table_group_mem_t;
 
-extern int isolate_lru_page(struct page *page);	/* from internal.h */
 extern bool mm_iommu_preregistered(struct mm_struct *mm);
 extern long mm_iommu_new(struct mm_struct *mm,
 		unsigned long ua, unsigned long entries,
diff --git a/arch/powerpc/include/asm/nmi.h b/arch/powerpc/include/asm/nmi.h
index 160abcb8e9fa..ea0e487f87b1 100644
--- a/arch/powerpc/include/asm/nmi.h
+++ b/arch/powerpc/include/asm/nmi.h
@@ -9,7 +9,7 @@ long soft_nmi_interrupt(struct pt_regs *regs);
 static inline void arch_touch_nmi_watchdog(void) {}
 #endif
 
-#if defined(CONFIG_NMI_IPI) && defined(CONFIG_STACKTRACE)
+#ifdef CONFIG_NMI_IPI
 extern void arch_trigger_cpumask_backtrace(const cpumask_t *mask,
 					   bool exclude_self);
 #define arch_trigger_cpumask_backtrace arch_trigger_cpumask_backtrace
diff --git a/arch/powerpc/include/asm/nohash/32/hugetlb-8xx.h b/arch/powerpc/include/asm/nohash/32/hugetlb-8xx.h
index 64b6c608eca4..de092b04ee1a 100644
--- a/arch/powerpc/include/asm/nohash/32/hugetlb-8xx.h
+++ b/arch/powerpc/include/asm/nohash/32/hugetlb-8xx.h
@@ -71,9 +71,9 @@ static inline pte_t arch_make_huge_pte(pte_t entry, unsigned int shift, vm_flags
 	size_t size = 1UL << shift;
 
 	if (size == SZ_16K)
-		return __pte(pte_val(entry) & ~_PAGE_HUGE);
+		return __pte(pte_val(entry) | _PAGE_SPS);
 	else
-		return entry;
+		return __pte(pte_val(entry) | _PAGE_SPS | _PAGE_HUGE);
 }
 #define arch_make_huge_pte arch_make_huge_pte
 #endif
diff --git a/arch/powerpc/include/asm/nohash/32/pgtable.h b/arch/powerpc/include/asm/nohash/32/pgtable.h
index d959c2a73fbf..dcc9b338e042 100644
--- a/arch/powerpc/include/asm/nohash/32/pgtable.h
+++ b/arch/powerpc/include/asm/nohash/32/pgtable.h
@@ -349,15 +349,14 @@ static inline int pte_young(pte_t pte)
  * of the pte page.  -- paulus
  */
 #ifndef CONFIG_BOOKE
-#define pmd_page(pmd)		\
-	pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT)
+#define pmd_pfn(pmd)		(pmd_val(pmd) >> PAGE_SHIFT)
 #else
 #define pmd_page_vaddr(pmd)	\
 	((unsigned long)(pmd_val(pmd) & ~(PTE_TABLE_SIZE - 1)))
-#define pmd_page(pmd)		\
-	pfn_to_page((__pa(pmd_val(pmd)) >> PAGE_SHIFT))
+#define pmd_pfn(pmd)		(__pa(pmd_val(pmd)) >> PAGE_SHIFT)
 #endif
 
+#define pmd_page(pmd)		pfn_to_page(pmd_pfn(pmd))
 /*
  * Encode and decode a swap entry.
  * Note that the bits we use in a PTE for representing a swap entry
diff --git a/arch/powerpc/include/asm/nohash/64/pgtable.h b/arch/powerpc/include/asm/nohash/64/pgtable.h
index 2816d158280a..78888b0c30f6 100644
--- a/arch/powerpc/include/asm/nohash/64/pgtable.h
+++ b/arch/powerpc/include/asm/nohash/64/pgtable.h
@@ -142,6 +142,7 @@ static inline pte_t pmd_pte(pmd_t pmd)
 #define	pmd_present(pmd)	(!pmd_none(pmd))
 #define pmd_page_vaddr(pmd)	(pmd_val(pmd) & ~PMD_MASKED_BITS)
 extern struct page *pmd_page(pmd_t pmd);
+#define pmd_pfn(pmd)		(page_to_pfn(pmd_page(pmd)))
 
 static inline void pud_set(pud_t *pudp, unsigned long val)
 {
diff --git a/arch/powerpc/include/asm/uaccess.h b/arch/powerpc/include/asm/uaccess.h
index 63316100080c..2e83217f52de 100644
--- a/arch/powerpc/include/asm/uaccess.h
+++ b/arch/powerpc/include/asm/uaccess.h
@@ -11,18 +11,9 @@
 #ifdef __powerpc64__
 /* We use TASK_SIZE_USER64 as TASK_SIZE is not constant */
 #define TASK_SIZE_MAX		TASK_SIZE_USER64
-#else
-#define TASK_SIZE_MAX		TASK_SIZE
 #endif
 
-static inline bool __access_ok(unsigned long addr, unsigned long size)
-{
-	return addr < TASK_SIZE_MAX && size <= TASK_SIZE_MAX - addr;
-}
-
-#define access_ok(addr, size)		\
-	(__chk_user_ptr(addr),		\
-	 __access_ok((unsigned long)(addr), (size)))
+#include <asm-generic/access_ok.h>
 
 /*
  * These are the main single-value transfer routines.  They automatically
@@ -467,8 +458,6 @@ do {									\
 		unsafe_put_user(*(u8*)(_src + _i), (u8 __user *)(_dst + _i), e); \
 } while (0)
 
-#define HAVE_GET_KERNEL_NOFAULT
-
 #define __get_kernel_nofault(dst, src, type, err_label)			\
 	__get_user_size_goto(*((type *)(dst)),				\
 		(__force type __user *)(src), sizeof(type), err_label)
diff --git a/arch/powerpc/include/asm/xor_altivec.h b/arch/powerpc/include/asm/xor_altivec.h
index 6ca923510b59..294620a25f80 100644
--- a/arch/powerpc/include/asm/xor_altivec.h
+++ b/arch/powerpc/include/asm/xor_altivec.h
@@ -3,17 +3,20 @@
 #define _ASM_POWERPC_XOR_ALTIVEC_H
 
 #ifdef CONFIG_ALTIVEC
-
-void xor_altivec_2(unsigned long bytes, unsigned long *v1_in,
-		   unsigned long *v2_in);
-void xor_altivec_3(unsigned long bytes, unsigned long *v1_in,
-		   unsigned long *v2_in, unsigned long *v3_in);
-void xor_altivec_4(unsigned long bytes, unsigned long *v1_in,
-		   unsigned long *v2_in, unsigned long *v3_in,
-		   unsigned long *v4_in);
-void xor_altivec_5(unsigned long bytes, unsigned long *v1_in,
-		   unsigned long *v2_in, unsigned long *v3_in,
-		   unsigned long *v4_in, unsigned long *v5_in);
+void xor_altivec_2(unsigned long bytes, unsigned long * __restrict p1,
+		   const unsigned long * __restrict p2);
+void xor_altivec_3(unsigned long bytes, unsigned long * __restrict p1,
+		   const unsigned long * __restrict p2,
+		   const unsigned long * __restrict p3);
+void xor_altivec_4(unsigned long bytes, unsigned long * __restrict p1,
+		   const unsigned long * __restrict p2,
+		   const unsigned long * __restrict p3,
+		   const unsigned long * __restrict p4);
+void xor_altivec_5(unsigned long bytes, unsigned long * __restrict p1,
+		   const unsigned long * __restrict p2,
+		   const unsigned long * __restrict p3,
+		   const unsigned long * __restrict p4,
+		   const unsigned long * __restrict p5);
 
 #endif
 #endif /* _ASM_POWERPC_XOR_ALTIVEC_H */
diff --git a/arch/powerpc/include/uapi/asm/shmbuf.h b/arch/powerpc/include/uapi/asm/shmbuf.h
index 00422b2f3c63..439a3a02ba64 100644
--- a/arch/powerpc/include/uapi/asm/shmbuf.h
+++ b/arch/powerpc/include/uapi/asm/shmbuf.h
@@ -2,6 +2,9 @@
 #ifndef _ASM_POWERPC_SHMBUF_H
 #define _ASM_POWERPC_SHMBUF_H
 
+#include <asm/ipcbuf.h>
+#include <asm/posix_types.h>
+
 /*
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -34,7 +37,7 @@ struct shmid64_ds {
 	unsigned long		shm_ctime;	/* last change time */
 	unsigned long		__unused4;
 #endif
-	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_size_t		shm_segsz;	/* size of segment (bytes) */
 	__kernel_pid_t		shm_cpid;	/* pid of creator */
 	__kernel_pid_t		shm_lpid;	/* pid of last operator */
 	unsigned long		shm_nattch;	/* no. of current attaches */
diff --git a/arch/powerpc/include/uapi/asm/signal.h b/arch/powerpc/include/uapi/asm/signal.h
index 04873dd311c2..37d41d87c45b 100644
--- a/arch/powerpc/include/uapi/asm/signal.h
+++ b/arch/powerpc/include/uapi/asm/signal.h
@@ -86,7 +86,7 @@ struct sigaction {
 typedef struct sigaltstack {
 	void __user *ss_sp;
 	int ss_flags;
-	size_t ss_size;
+	__kernel_size_t ss_size;
 } stack_t;
 
 
diff --git a/arch/powerpc/kernel/fadump.c b/arch/powerpc/kernel/fadump.c
index d03e488cfe9c..4fdb7c77fda1 100644
--- a/arch/powerpc/kernel/fadump.c
+++ b/arch/powerpc/kernel/fadump.c
@@ -113,6 +113,12 @@ static int __init fadump_cma_init(void)
 	}
 
 	/*
+	 *  If CMA activation fails, keep the pages reserved, instead of
+	 *  exposing them to buddy allocator. Same as 'fadump=nocma' case.
+	 */
+	cma_reserve_pages_on_error(fadump_cma);
+
+	/*
 	 * So we now have successfully initialized cma area for fadump.
 	 */
 	pr_info("Initialized 0x%lx bytes cma area at %ldMB from 0x%lx "
@@ -544,7 +550,7 @@ int __init fadump_reserve_mem(void)
 		if (!fw_dump.nocma) {
 			fw_dump.boot_memory_size =
 				ALIGN(fw_dump.boot_memory_size,
-				      FADUMP_CMA_ALIGNMENT);
+				      CMA_MIN_ALIGNMENT_BYTES);
 		}
 #endif
 
diff --git a/arch/powerpc/kernel/head_book3s_32.S b/arch/powerpc/kernel/head_book3s_32.S
index fa84744d6b24..b876ef8c70a7 100644
--- a/arch/powerpc/kernel/head_book3s_32.S
+++ b/arch/powerpc/kernel/head_book3s_32.S
@@ -421,14 +421,14 @@ InstructionTLBMiss:
  */
 	/* Get PTE (linux-style) and check access */
 	mfspr	r3,SPRN_IMISS
-#ifdef CONFIG_MODULES
+#if defined(CONFIG_MODULES) || defined(CONFIG_DEBUG_PAGEALLOC) || defined(CONFIG_KFENCE)
 	lis	r1, TASK_SIZE@h		/* check if kernel address */
 	cmplw	0,r1,r3
 #endif
 	mfspr	r2, SPRN_SDR1
 	li	r1,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC | _PAGE_USER
 	rlwinm	r2, r2, 28, 0xfffff000
-#ifdef CONFIG_MODULES
+#if defined(CONFIG_MODULES) || defined(CONFIG_DEBUG_PAGEALLOC) || defined(CONFIG_KFENCE)
 	bgt-	112f
 	lis	r2, (swapper_pg_dir - PAGE_OFFSET)@ha	/* if kernel address, use */
 	li	r1,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC
diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c
index d45a415d5374..2069bbb90a9a 100644
--- a/arch/powerpc/kernel/sysfs.c
+++ b/arch/powerpc/kernel/sysfs.c
@@ -1110,14 +1110,6 @@ EXPORT_SYMBOL_GPL(cpu_remove_dev_attr_group);
 /* NUMA stuff */
 
 #ifdef CONFIG_NUMA
-static void __init register_nodes(void)
-{
-	int i;
-
-	for (i = 0; i < MAX_NUMNODES; i++)
-		register_one_node(i);
-}
-
 int sysfs_add_device_to_node(struct device *dev, int nid)
 {
 	struct node *node = node_devices[nid];
@@ -1132,13 +1124,6 @@ void sysfs_remove_device_from_node(struct device *dev, int nid)
 	sysfs_remove_link(&node->dev.kobj, kobject_name(&dev->kobj));
 }
 EXPORT_SYMBOL_GPL(sysfs_remove_device_from_node);
-
-#else
-static void __init register_nodes(void)
-{
-	return;
-}
-
 #endif
 
 /* Only valid if CPU is present. */
@@ -1155,8 +1140,6 @@ static int __init topology_init(void)
 {
 	int cpu, r;
 
-	register_nodes();
-
 	for_each_possible_cpu(cpu) {
 		struct cpu *c = &per_cpu(cpu_devices, cpu);
 
diff --git a/arch/powerpc/kvm/book3s_hv_uvmem.c b/arch/powerpc/kvm/book3s_hv_uvmem.c
index e414ca44839f..8cabdb39cbbc 100644
--- a/arch/powerpc/kvm/book3s_hv_uvmem.c
+++ b/arch/powerpc/kvm/book3s_hv_uvmem.c
@@ -91,6 +91,7 @@
 #include <linux/kvm_host.h>
 #include <linux/ksm.h>
 #include <linux/of.h>
+#include <linux/memremap.h>
 #include <asm/ultravisor.h>
 #include <asm/mman.h>
 #include <asm/kvm_ppc.h>
@@ -712,7 +713,6 @@ static struct page *kvmppc_uvmem_get_page(unsigned long gpa, struct kvm *kvm)
 
 	dpage = pfn_to_page(uvmem_pfn);
 	dpage->zone_device_data = pvt;
-	get_page(dpage);
 	lock_page(dpage);
 	return dpage;
 out_clear:
diff --git a/arch/powerpc/lib/sstep.c b/arch/powerpc/lib/sstep.c
index a94b0cd0bdc5..5ed88fbee0db 100644
--- a/arch/powerpc/lib/sstep.c
+++ b/arch/powerpc/lib/sstep.c
@@ -112,9 +112,9 @@ static nokprobe_inline long address_ok(struct pt_regs *regs,
 {
 	if (!user_mode(regs))
 		return 1;
-	if (__access_ok(ea, nb))
+	if (access_ok((void __user *)ea, nb))
 		return 1;
-	if (__access_ok(ea, 1))
+	if (access_ok((void __user *)ea, 1))
 		/* Access overlaps the end of the user region */
 		regs->dar = TASK_SIZE_MAX - 1;
 	else
@@ -3264,12 +3264,14 @@ void emulate_update_regs(struct pt_regs *regs, struct instruction_op *op)
 		case BARRIER_EIEIO:
 			eieio();
 			break;
+#ifdef CONFIG_PPC64
 		case BARRIER_LWSYNC:
 			asm volatile("lwsync" : : : "memory");
 			break;
 		case BARRIER_PTESYNC:
 			asm volatile("ptesync" : : : "memory");
 			break;
+#endif
 		}
 		break;
 
diff --git a/arch/powerpc/lib/xor_vmx.c b/arch/powerpc/lib/xor_vmx.c
index 54e61979e80e..aab49d056d18 100644
--- a/arch/powerpc/lib/xor_vmx.c
+++ b/arch/powerpc/lib/xor_vmx.c
@@ -49,8 +49,9 @@ typedef vector signed char unative_t;
 		V1##_3 = vec_xor(V1##_3, V2##_3);	\
 	} while (0)
 
-void __xor_altivec_2(unsigned long bytes, unsigned long *v1_in,
-		     unsigned long *v2_in)
+void __xor_altivec_2(unsigned long bytes,
+		     unsigned long * __restrict v1_in,
+		     const unsigned long * __restrict v2_in)
 {
 	DEFINE(v1);
 	DEFINE(v2);
@@ -67,8 +68,10 @@ void __xor_altivec_2(unsigned long bytes, unsigned long *v1_in,
 	} while (--lines > 0);
 }
 
-void __xor_altivec_3(unsigned long bytes, unsigned long *v1_in,
-		     unsigned long *v2_in, unsigned long *v3_in)
+void __xor_altivec_3(unsigned long bytes,
+		     unsigned long * __restrict v1_in,
+		     const unsigned long * __restrict v2_in,
+		     const unsigned long * __restrict v3_in)
 {
 	DEFINE(v1);
 	DEFINE(v2);
@@ -89,9 +92,11 @@ void __xor_altivec_3(unsigned long bytes, unsigned long *v1_in,
 	} while (--lines > 0);
 }
 
-void __xor_altivec_4(unsigned long bytes, unsigned long *v1_in,
-		     unsigned long *v2_in, unsigned long *v3_in,
-		     unsigned long *v4_in)
+void __xor_altivec_4(unsigned long bytes,
+		     unsigned long * __restrict v1_in,
+		     const unsigned long * __restrict v2_in,
+		     const unsigned long * __restrict v3_in,
+		     const unsigned long * __restrict v4_in)
 {
 	DEFINE(v1);
 	DEFINE(v2);
@@ -116,9 +121,12 @@ void __xor_altivec_4(unsigned long bytes, unsigned long *v1_in,
 	} while (--lines > 0);
 }
 
-void __xor_altivec_5(unsigned long bytes, unsigned long *v1_in,
-		     unsigned long *v2_in, unsigned long *v3_in,
-		     unsigned long *v4_in, unsigned long *v5_in)
+void __xor_altivec_5(unsigned long bytes,
+		     unsigned long * __restrict v1_in,
+		     const unsigned long * __restrict v2_in,
+		     const unsigned long * __restrict v3_in,
+		     const unsigned long * __restrict v4_in,
+		     const unsigned long * __restrict v5_in)
 {
 	DEFINE(v1);
 	DEFINE(v2);
diff --git a/arch/powerpc/lib/xor_vmx.h b/arch/powerpc/lib/xor_vmx.h
index 5c2b0839b179..573c41d90dac 100644
--- a/arch/powerpc/lib/xor_vmx.h
+++ b/arch/powerpc/lib/xor_vmx.h
@@ -6,16 +6,17 @@
  * outside of the enable/disable altivec block.
  */
 
-void __xor_altivec_2(unsigned long bytes, unsigned long *v1_in,
-			     unsigned long *v2_in);
-
-void __xor_altivec_3(unsigned long bytes, unsigned long *v1_in,
-			     unsigned long *v2_in, unsigned long *v3_in);
-
-void __xor_altivec_4(unsigned long bytes, unsigned long *v1_in,
-			     unsigned long *v2_in, unsigned long *v3_in,
-			     unsigned long *v4_in);
-
-void __xor_altivec_5(unsigned long bytes, unsigned long *v1_in,
-			     unsigned long *v2_in, unsigned long *v3_in,
-			     unsigned long *v4_in, unsigned long *v5_in);
+void __xor_altivec_2(unsigned long bytes, unsigned long * __restrict p1,
+		     const unsigned long * __restrict p2);
+void __xor_altivec_3(unsigned long bytes, unsigned long * __restrict p1,
+		     const unsigned long * __restrict p2,
+		     const unsigned long * __restrict p3);
+void __xor_altivec_4(unsigned long bytes, unsigned long * __restrict p1,
+		     const unsigned long * __restrict p2,
+		     const unsigned long * __restrict p3,
+		     const unsigned long * __restrict p4);
+void __xor_altivec_5(unsigned long bytes, unsigned long * __restrict p1,
+		     const unsigned long * __restrict p2,
+		     const unsigned long * __restrict p3,
+		     const unsigned long * __restrict p4,
+		     const unsigned long * __restrict p5);
diff --git a/arch/powerpc/lib/xor_vmx_glue.c b/arch/powerpc/lib/xor_vmx_glue.c
index 80dba916c367..35d917ece4d1 100644
--- a/arch/powerpc/lib/xor_vmx_glue.c
+++ b/arch/powerpc/lib/xor_vmx_glue.c
@@ -12,47 +12,51 @@
 #include <asm/xor_altivec.h>
 #include "xor_vmx.h"
 
-void xor_altivec_2(unsigned long bytes, unsigned long *v1_in,
-		   unsigned long *v2_in)
+void xor_altivec_2(unsigned long bytes, unsigned long * __restrict p1,
+		   const unsigned long * __restrict p2)
 {
 	preempt_disable();
 	enable_kernel_altivec();
-	__xor_altivec_2(bytes, v1_in, v2_in);
+	__xor_altivec_2(bytes, p1, p2);
 	disable_kernel_altivec();
 	preempt_enable();
 }
 EXPORT_SYMBOL(xor_altivec_2);
 
-void xor_altivec_3(unsigned long bytes,  unsigned long *v1_in,
-		   unsigned long *v2_in, unsigned long *v3_in)
+void xor_altivec_3(unsigned long bytes, unsigned long * __restrict p1,
+		   const unsigned long * __restrict p2,
+		   const unsigned long * __restrict p3)
 {
 	preempt_disable();
 	enable_kernel_altivec();
-	__xor_altivec_3(bytes, v1_in, v2_in, v3_in);
+	__xor_altivec_3(bytes, p1, p2, p3);
 	disable_kernel_altivec();
 	preempt_enable();
 }
 EXPORT_SYMBOL(xor_altivec_3);
 
-void xor_altivec_4(unsigned long bytes,  unsigned long *v1_in,
-		   unsigned long *v2_in, unsigned long *v3_in,
-		   unsigned long *v4_in)
+void xor_altivec_4(unsigned long bytes, unsigned long * __restrict p1,
+		   const unsigned long * __restrict p2,
+		   const unsigned long * __restrict p3,
+		   const unsigned long * __restrict p4)
 {
 	preempt_disable();
 	enable_kernel_altivec();
-	__xor_altivec_4(bytes, v1_in, v2_in, v3_in, v4_in);
+	__xor_altivec_4(bytes, p1, p2, p3, p4);
 	disable_kernel_altivec();
 	preempt_enable();
 }
 EXPORT_SYMBOL(xor_altivec_4);
 
-void xor_altivec_5(unsigned long bytes,  unsigned long *v1_in,
-		   unsigned long *v2_in, unsigned long *v3_in,
-		   unsigned long *v4_in, unsigned long *v5_in)
+void xor_altivec_5(unsigned long bytes, unsigned long * __restrict p1,
+		   const unsigned long * __restrict p2,
+		   const unsigned long * __restrict p3,
+		   const unsigned long * __restrict p4,
+		   const unsigned long * __restrict p5)
 {
 	preempt_disable();
 	enable_kernel_altivec();
-	__xor_altivec_5(bytes, v1_in, v2_in, v3_in, v4_in, v5_in);
+	__xor_altivec_5(bytes, p1, p2, p3, p4, p5);
 	disable_kernel_altivec();
 	preempt_enable();
 }
diff --git a/arch/powerpc/mm/book3s64/pgtable.c b/arch/powerpc/mm/book3s64/pgtable.c
index 79ce3c22a29d..052e6590f84f 100644
--- a/arch/powerpc/mm/book3s64/pgtable.c
+++ b/arch/powerpc/mm/book3s64/pgtable.c
@@ -6,6 +6,7 @@
 #include <linux/sched.h>
 #include <linux/mm_types.h>
 #include <linux/memblock.h>
+#include <linux/memremap.h>
 #include <linux/debugfs.h>
 #include <misc/cxl-base.h>
 
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index 5adcbd9b5e88..0804b9a11934 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -40,6 +40,7 @@ config RISCV
 	select ARCH_USE_MEMTEST
 	select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT if MMU
 	select ARCH_WANT_FRAME_POINTERS
+	select ARCH_WANT_GENERAL_HUGETLB
 	select ARCH_WANT_HUGE_PMD_SHARE if 64BIT
 	select BINFMT_FLAT_NO_DATA_START_OFFSET if !MMU
 	select BUILDTIME_TABLE_SORT if MMU
@@ -171,9 +172,6 @@ config ARCH_SPARSEMEM_ENABLE
 config ARCH_SELECT_MEMORY_MODEL
 	def_bool ARCH_SPARSEMEM_ENABLE
 
-config ARCH_WANT_GENERAL_HUGETLB
-	def_bool y
-
 config ARCH_SUPPORTS_UPROBES
 	def_bool y
 
diff --git a/arch/riscv/Kconfig.erratas b/arch/riscv/Kconfig.erratas
index b44d6ecdb46e..0aacd7052585 100644
--- a/arch/riscv/Kconfig.erratas
+++ b/arch/riscv/Kconfig.erratas
@@ -2,6 +2,7 @@ menu "CPU errata selection"
 
 config RISCV_ERRATA_ALTERNATIVE
 	bool "RISC-V alternative scheme"
+	depends on !XIP_KERNEL
 	default y
 	help
 	  This Kconfig allows the kernel to automatically patch the
diff --git a/arch/riscv/Kconfig.socs b/arch/riscv/Kconfig.socs
index 6ec44a22278a..c112ab2a9052 100644
--- a/arch/riscv/Kconfig.socs
+++ b/arch/riscv/Kconfig.socs
@@ -14,8 +14,8 @@ config SOC_SIFIVE
 	select CLK_SIFIVE
 	select CLK_SIFIVE_PRCI
 	select SIFIVE_PLIC
-	select RISCV_ERRATA_ALTERNATIVE
-	select ERRATA_SIFIVE
+	select RISCV_ERRATA_ALTERNATIVE if !XIP_KERNEL
+	select ERRATA_SIFIVE if !XIP_KERNEL
 	help
 	  This enables support for SiFive SoC platform hardware.
 
diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
index 8a107ed18b0d..7d81102cffd4 100644
--- a/arch/riscv/Makefile
+++ b/arch/riscv/Makefile
@@ -50,6 +50,12 @@ riscv-march-$(CONFIG_ARCH_RV32I)	:= rv32ima
 riscv-march-$(CONFIG_ARCH_RV64I)	:= rv64ima
 riscv-march-$(CONFIG_FPU)		:= $(riscv-march-y)fd
 riscv-march-$(CONFIG_RISCV_ISA_C)	:= $(riscv-march-y)c
+
+# Newer binutils versions default to ISA spec version 20191213 which moves some
+# instructions from the I extension to the Zicsr and Zifencei extensions.
+toolchain-need-zicsr-zifencei := $(call cc-option-yn, -march=$(riscv-march-y)_zicsr_zifencei)
+riscv-march-$(toolchain-need-zicsr-zifencei) := $(riscv-march-y)_zicsr_zifencei
+
 KBUILD_CFLAGS += -march=$(subst fd,,$(riscv-march-y))
 KBUILD_AFLAGS += -march=$(riscv-march-y)
 
diff --git a/arch/riscv/boot/dts/canaan/k210.dtsi b/arch/riscv/boot/dts/canaan/k210.dtsi
index 56f57118c633..44d338514761 100644
--- a/arch/riscv/boot/dts/canaan/k210.dtsi
+++ b/arch/riscv/boot/dts/canaan/k210.dtsi
@@ -113,7 +113,8 @@
 			compatible = "canaan,k210-plic", "sifive,plic-1.0.0";
 			reg = <0xC000000 0x4000000>;
 			interrupt-controller;
-			interrupts-extended = <&cpu0_intc 11>, <&cpu1_intc 11>;
+			interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>,
+					      <&cpu1_intc 11>, <&cpu1_intc 9>;
 			riscv,ndev = <65>;
 		};
 
diff --git a/arch/riscv/configs/nommu_k210_sdcard_defconfig b/arch/riscv/configs/nommu_k210_sdcard_defconfig
index 2a82a3b2992b..af64b95e88cc 100644
--- a/arch/riscv/configs/nommu_k210_sdcard_defconfig
+++ b/arch/riscv/configs/nommu_k210_sdcard_defconfig
@@ -23,7 +23,7 @@ CONFIG_SLOB=y
 CONFIG_SOC_CANAAN=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
-CONFIG_CMDLINE="earlycon console=ttySIF0 rootdelay=2 root=/dev/mmcblk0p1 ro"
+CONFIG_CMDLINE="earlycon console=ttySIF0 root=/dev/mmcblk0p1 rootwait ro"
 CONFIG_CMDLINE_FORCE=y
 # CONFIG_SECCOMP is not set
 # CONFIG_STACKPROTECTOR is not set
diff --git a/arch/riscv/include/asm/page.h b/arch/riscv/include/asm/page.h
index 160e3a1e8f8b..004372f8da54 100644
--- a/arch/riscv/include/asm/page.h
+++ b/arch/riscv/include/asm/page.h
@@ -119,7 +119,7 @@ extern phys_addr_t phys_ram_base;
 	((x) >= kernel_map.virt_addr && (x) < (kernel_map.virt_addr + kernel_map.size))
 
 #define is_linear_mapping(x)	\
-	((x) >= PAGE_OFFSET && (!IS_ENABLED(CONFIG_64BIT) || (x) < kernel_map.virt_addr))
+	((x) >= PAGE_OFFSET && (!IS_ENABLED(CONFIG_64BIT) || (x) < PAGE_OFFSET + KERN_VIRT_SIZE))
 
 #define linear_mapping_pa_to_va(x)	((void *)((unsigned long)(x) + kernel_map.va_pa_offset))
 #define kernel_mapping_pa_to_va(y)	({						\
diff --git a/arch/riscv/include/asm/pgtable.h b/arch/riscv/include/asm/pgtable.h
index 7e949f25c933..e3549e50de95 100644
--- a/arch/riscv/include/asm/pgtable.h
+++ b/arch/riscv/include/asm/pgtable.h
@@ -13,6 +13,7 @@
 
 #ifndef CONFIG_MMU
 #define KERNEL_LINK_ADDR	PAGE_OFFSET
+#define KERN_VIRT_SIZE		(UL(-1))
 #else
 
 #define ADDRESS_SPACE_END	(UL(-1))
diff --git a/arch/riscv/include/asm/uaccess.h b/arch/riscv/include/asm/uaccess.h
index c701a5e57a2b..855450bed9f5 100644
--- a/arch/riscv/include/asm/uaccess.h
+++ b/arch/riscv/include/asm/uaccess.h
@@ -21,42 +21,13 @@
 #include <asm/byteorder.h>
 #include <asm/extable.h>
 #include <asm/asm.h>
+#include <asm-generic/access_ok.h>
 
 #define __enable_user_access()							\
 	__asm__ __volatile__ ("csrs sstatus, %0" : : "r" (SR_SUM) : "memory")
 #define __disable_user_access()							\
 	__asm__ __volatile__ ("csrc sstatus, %0" : : "r" (SR_SUM) : "memory")
 
-/**
- * access_ok: - Checks if a user space pointer is valid
- * @addr: User space pointer to start of block to check
- * @size: Size of block to check
- *
- * Context: User context only.  This function may sleep.
- *
- * Checks if a pointer to a block of memory in user space is valid.
- *
- * Returns true (nonzero) if the memory block may be valid, false (zero)
- * if it is definitely invalid.
- *
- * Note that, depending on architecture, this function probably just
- * checks that the pointer is in the user space range - after calling
- * this function, memory access functions may still return -EFAULT.
- */
-#define access_ok(addr, size) ({					\
-	__chk_user_ptr(addr);						\
-	likely(__access_ok((unsigned long __force)(addr), (size)));	\
-})
-
-/*
- * Ensure that the range [addr, addr+size) is within the process's
- * address space
- */
-static inline int __access_ok(unsigned long addr, unsigned long size)
-{
-	return size <= TASK_SIZE && addr <= TASK_SIZE - size;
-}
-
 /*
  * The exception table consists of pairs of addresses: the first is the
  * address of an instruction that is allowed to fault, and the second is
@@ -346,8 +317,6 @@ unsigned long __must_check clear_user(void __user *to, unsigned long n)
 		__clear_user(to, n) : n;
 }
 
-#define HAVE_GET_KERNEL_NOFAULT
-
 #define __get_kernel_nofault(dst, src, type, err_label)			\
 do {									\
 	long __kr_err;							\
diff --git a/arch/riscv/kernel/Makefile b/arch/riscv/kernel/Makefile
index 612556faa527..ffc87e76b1dd 100644
--- a/arch/riscv/kernel/Makefile
+++ b/arch/riscv/kernel/Makefile
@@ -51,6 +51,8 @@ obj-$(CONFIG_MODULE_SECTIONS)	+= module-sections.o
 obj-$(CONFIG_FUNCTION_TRACER)	+= mcount.o ftrace.o
 obj-$(CONFIG_DYNAMIC_FTRACE)	+= mcount-dyn.o
 
+obj-$(CONFIG_TRACE_IRQFLAGS)	+= trace_irq.o
+
 obj-$(CONFIG_RISCV_BASE_PMU)	+= perf_event.o
 obj-$(CONFIG_PERF_EVENTS)	+= perf_callchain.o
 obj-$(CONFIG_HAVE_PERF_REGS)	+= perf_regs.o
diff --git a/arch/riscv/kernel/cpu-hotplug.c b/arch/riscv/kernel/cpu-hotplug.c
index be7f05b542bb..f7a832e3a1d1 100644
--- a/arch/riscv/kernel/cpu-hotplug.c
+++ b/arch/riscv/kernel/cpu-hotplug.c
@@ -12,6 +12,7 @@
 #include <linux/sched/hotplug.h>
 #include <asm/irq.h>
 #include <asm/cpu_ops.h>
+#include <asm/numa.h>
 #include <asm/sbi.h>
 
 bool cpu_has_hotplug(unsigned int cpu)
@@ -40,6 +41,7 @@ int __cpu_disable(void)
 		return ret;
 
 	remove_cpu_topology(cpu);
+	numa_remove_cpu(cpu);
 	set_cpu_online(cpu, false);
 	irq_migrate_all_off_this_cpu();
 
diff --git a/arch/riscv/kernel/entry.S b/arch/riscv/kernel/entry.S
index ed29e9c8f660..d6a46ed0bf05 100644
--- a/arch/riscv/kernel/entry.S
+++ b/arch/riscv/kernel/entry.S
@@ -108,7 +108,7 @@ _save_context:
 .option pop
 
 #ifdef CONFIG_TRACE_IRQFLAGS
-	call trace_hardirqs_off
+	call __trace_hardirqs_off
 #endif
 
 #ifdef CONFIG_CONTEXT_TRACKING
@@ -143,7 +143,7 @@ skip_context_tracking:
 	li t0, EXC_BREAKPOINT
 	beq s4, t0, 1f
 #ifdef CONFIG_TRACE_IRQFLAGS
-	call trace_hardirqs_on
+	call __trace_hardirqs_on
 #endif
 	csrs CSR_STATUS, SR_IE
 
@@ -234,7 +234,7 @@ ret_from_exception:
 	REG_L s0, PT_STATUS(sp)
 	csrc CSR_STATUS, SR_IE
 #ifdef CONFIG_TRACE_IRQFLAGS
-	call trace_hardirqs_off
+	call __trace_hardirqs_off
 #endif
 #ifdef CONFIG_RISCV_M_MODE
 	/* the MPP value is too large to be used as an immediate arg for addi */
@@ -270,10 +270,10 @@ restore_all:
 	REG_L s1, PT_STATUS(sp)
 	andi t0, s1, SR_PIE
 	beqz t0, 1f
-	call trace_hardirqs_on
+	call __trace_hardirqs_on
 	j 2f
 1:
-	call trace_hardirqs_off
+	call __trace_hardirqs_off
 2:
 #endif
 	REG_L a0, PT_STATUS(sp)
diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S
index 2363b43312fc..ec07f991866a 100644
--- a/arch/riscv/kernel/head.S
+++ b/arch/riscv/kernel/head.S
@@ -22,14 +22,13 @@
 	add \reg, \reg, t0
 .endm
 .macro XIP_FIXUP_FLASH_OFFSET reg
-	la t1, __data_loc
-	li t0, XIP_OFFSET_MASK
-	and t1, t1, t0
-	li t1, XIP_OFFSET
-	sub t0, t0, t1
-	sub \reg, \reg, t0
+	la t0, __data_loc
+	REG_L t1, _xip_phys_offset
+	sub \reg, \reg, t1
+	add \reg, \reg, t0
 .endm
 _xip_fixup: .dword CONFIG_PHYS_RAM_BASE - CONFIG_XIP_PHYS_ADDR - XIP_OFFSET
+_xip_phys_offset: .dword CONFIG_XIP_PHYS_ADDR + XIP_OFFSET
 #else
 .macro XIP_FIXUP_OFFSET reg
 .endm
diff --git a/arch/riscv/kernel/module.c b/arch/riscv/kernel/module.c
index 68a9e3d1fe16..4a48287513c3 100644
--- a/arch/riscv/kernel/module.c
+++ b/arch/riscv/kernel/module.c
@@ -13,6 +13,19 @@
 #include <linux/pgtable.h>
 #include <asm/sections.h>
 
+/*
+ * The auipc+jalr instruction pair can reach any PC-relative offset
+ * in the range [-2^31 - 2^11, 2^31 - 2^11)
+ */
+static bool riscv_insn_valid_32bit_offset(ptrdiff_t val)
+{
+#ifdef CONFIG_32BIT
+	return true;
+#else
+	return (-(1L << 31) - (1L << 11)) <= val && val < ((1L << 31) - (1L << 11));
+#endif
+}
+
 static int apply_r_riscv_32_rela(struct module *me, u32 *location, Elf_Addr v)
 {
 	if (v != (u32)v) {
@@ -95,7 +108,7 @@ static int apply_r_riscv_pcrel_hi20_rela(struct module *me, u32 *location,
 	ptrdiff_t offset = (void *)v - (void *)location;
 	s32 hi20;
 
-	if (offset != (s32)offset) {
+	if (!riscv_insn_valid_32bit_offset(offset)) {
 		pr_err(
 		  "%s: target %016llx can not be addressed by the 32-bit offset from PC = %p\n",
 		  me->name, (long long)v, location);
@@ -197,10 +210,9 @@ static int apply_r_riscv_call_plt_rela(struct module *me, u32 *location,
 				       Elf_Addr v)
 {
 	ptrdiff_t offset = (void *)v - (void *)location;
-	s32 fill_v = offset;
 	u32 hi20, lo12;
 
-	if (offset != fill_v) {
+	if (!riscv_insn_valid_32bit_offset(offset)) {
 		/* Only emit the plt entry if offset over 32-bit range */
 		if (IS_ENABLED(CONFIG_MODULE_SECTIONS)) {
 			offset = module_emit_plt_entry(me, v);
@@ -224,10 +236,9 @@ static int apply_r_riscv_call_rela(struct module *me, u32 *location,
 				   Elf_Addr v)
 {
 	ptrdiff_t offset = (void *)v - (void *)location;
-	s32 fill_v = offset;
 	u32 hi20, lo12;
 
-	if (offset != fill_v) {
+	if (!riscv_insn_valid_32bit_offset(offset)) {
 		pr_err(
 		  "%s: target %016llx can not be addressed by the 32-bit offset from PC = %p\n",
 		  me->name, (long long)v, location);
diff --git a/arch/riscv/kernel/perf_callchain.c b/arch/riscv/kernel/perf_callchain.c
index 1fc075b8f764..55faa4991b87 100644
--- a/arch/riscv/kernel/perf_callchain.c
+++ b/arch/riscv/kernel/perf_callchain.c
@@ -15,8 +15,8 @@ static unsigned long user_backtrace(struct perf_callchain_entry_ctx *entry,
 {
 	struct stackframe buftail;
 	unsigned long ra = 0;
-	unsigned long *user_frame_tail =
-			(unsigned long *)(fp - sizeof(struct stackframe));
+	unsigned long __user *user_frame_tail =
+		(unsigned long __user *)(fp - sizeof(struct stackframe));
 
 	/* Check accessibility of one struct frame_tail beyond */
 	if (!access_ok(user_frame_tail, sizeof(buftail)))
diff --git a/arch/riscv/kernel/sbi.c b/arch/riscv/kernel/sbi.c
index f72527fcb347..775d3322b422 100644
--- a/arch/riscv/kernel/sbi.c
+++ b/arch/riscv/kernel/sbi.c
@@ -5,6 +5,7 @@
  * Copyright (c) 2020 Western Digital Corporation or its affiliates.
  */
 
+#include <linux/bits.h>
 #include <linux/init.h>
 #include <linux/pm.h>
 #include <linux/reboot.h>
@@ -85,7 +86,7 @@ static unsigned long __sbi_v01_cpumask_to_hartmask(const struct cpumask *cpu_mas
 			pr_warn("Unable to send any request to hartid > BITS_PER_LONG for SBI v0.1\n");
 			break;
 		}
-		hmask |= 1 << hartid;
+		hmask |= BIT(hartid);
 	}
 
 	return hmask;
@@ -160,7 +161,7 @@ static int __sbi_send_ipi_v01(const struct cpumask *cpu_mask)
 {
 	unsigned long hart_mask;
 
-	if (!cpu_mask)
+	if (!cpu_mask || cpumask_empty(cpu_mask))
 		cpu_mask = cpu_online_mask;
 	hart_mask = __sbi_v01_cpumask_to_hartmask(cpu_mask);
 
@@ -176,7 +177,7 @@ static int __sbi_rfence_v01(int fid, const struct cpumask *cpu_mask,
 	int result = 0;
 	unsigned long hart_mask;
 
-	if (!cpu_mask)
+	if (!cpu_mask || cpumask_empty(cpu_mask))
 		cpu_mask = cpu_online_mask;
 	hart_mask = __sbi_v01_cpumask_to_hartmask(cpu_mask);
 
@@ -249,26 +250,37 @@ static void __sbi_set_timer_v02(uint64_t stime_value)
 
 static int __sbi_send_ipi_v02(const struct cpumask *cpu_mask)
 {
-	unsigned long hartid, cpuid, hmask = 0, hbase = 0;
+	unsigned long hartid, cpuid, hmask = 0, hbase = 0, htop = 0;
 	struct sbiret ret = {0};
 	int result;
 
-	if (!cpu_mask)
+	if (!cpu_mask || cpumask_empty(cpu_mask))
 		cpu_mask = cpu_online_mask;
 
 	for_each_cpu(cpuid, cpu_mask) {
 		hartid = cpuid_to_hartid_map(cpuid);
-		if (hmask && ((hbase + BITS_PER_LONG) <= hartid)) {
-			ret = sbi_ecall(SBI_EXT_IPI, SBI_EXT_IPI_SEND_IPI,
-					hmask, hbase, 0, 0, 0, 0);
-			if (ret.error)
-				goto ecall_failed;
-			hmask = 0;
-			hbase = 0;
+		if (hmask) {
+			if (hartid + BITS_PER_LONG <= htop ||
+			    hbase + BITS_PER_LONG <= hartid) {
+				ret = sbi_ecall(SBI_EXT_IPI,
+						SBI_EXT_IPI_SEND_IPI, hmask,
+						hbase, 0, 0, 0, 0);
+				if (ret.error)
+					goto ecall_failed;
+				hmask = 0;
+			} else if (hartid < hbase) {
+				/* shift the mask to fit lower hartid */
+				hmask <<= hbase - hartid;
+				hbase = hartid;
+			}
 		}
-		if (!hmask)
+		if (!hmask) {
 			hbase = hartid;
-		hmask |= 1UL << (hartid - hbase);
+			htop = hartid;
+		} else if (hartid > htop) {
+			htop = hartid;
+		}
+		hmask |= BIT(hartid - hbase);
 	}
 
 	if (hmask) {
@@ -344,25 +356,35 @@ static int __sbi_rfence_v02(int fid, const struct cpumask *cpu_mask,
 			    unsigned long start, unsigned long size,
 			    unsigned long arg4, unsigned long arg5)
 {
-	unsigned long hartid, cpuid, hmask = 0, hbase = 0;
+	unsigned long hartid, cpuid, hmask = 0, hbase = 0, htop = 0;
 	int result;
 
-	if (!cpu_mask)
+	if (!cpu_mask || cpumask_empty(cpu_mask))
 		cpu_mask = cpu_online_mask;
 
 	for_each_cpu(cpuid, cpu_mask) {
 		hartid = cpuid_to_hartid_map(cpuid);
-		if (hmask && ((hbase + BITS_PER_LONG) <= hartid)) {
-			result = __sbi_rfence_v02_call(fid, hmask, hbase,
-						       start, size, arg4, arg5);
-			if (result)
-				return result;
-			hmask = 0;
-			hbase = 0;
+		if (hmask) {
+			if (hartid + BITS_PER_LONG <= htop ||
+			    hbase + BITS_PER_LONG <= hartid) {
+				result = __sbi_rfence_v02_call(fid, hmask,
+						hbase, start, size, arg4, arg5);
+				if (result)
+					return result;
+				hmask = 0;
+			} else if (hartid < hbase) {
+				/* shift the mask to fit lower hartid */
+				hmask <<= hbase - hartid;
+				hbase = hartid;
+			}
 		}
-		if (!hmask)
+		if (!hmask) {
 			hbase = hartid;
-		hmask |= 1UL << (hartid - hbase);
+			htop = hartid;
+		} else if (hartid > htop) {
+			htop = hartid;
+		}
+		hmask |= BIT(hartid - hbase);
 	}
 
 	if (hmask) {
diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
index b42bfdc67482..834eb652a7b9 100644
--- a/arch/riscv/kernel/setup.c
+++ b/arch/riscv/kernel/setup.c
@@ -301,9 +301,6 @@ static int __init topology_init(void)
 {
 	int i, ret;
 
-	for_each_online_node(i)
-		register_one_node(i);
-
 	for_each_possible_cpu(i) {
 		struct cpu *cpu = &per_cpu(cpu_devices, i);
 
diff --git a/arch/riscv/kernel/stacktrace.c b/arch/riscv/kernel/stacktrace.c
index 201ee206fb57..14d2b53ec322 100644
--- a/arch/riscv/kernel/stacktrace.c
+++ b/arch/riscv/kernel/stacktrace.c
@@ -22,15 +22,16 @@ void notrace walk_stackframe(struct task_struct *task, struct pt_regs *regs,
 			     bool (*fn)(void *, unsigned long), void *arg)
 {
 	unsigned long fp, sp, pc;
+	int level = 0;
 
 	if (regs) {
 		fp = frame_pointer(regs);
 		sp = user_stack_pointer(regs);
 		pc = instruction_pointer(regs);
 	} else if (task == NULL || task == current) {
-		fp = (unsigned long)__builtin_frame_address(1);
-		sp = (unsigned long)__builtin_frame_address(0);
-		pc = (unsigned long)__builtin_return_address(0);
+		fp = (unsigned long)__builtin_frame_address(0);
+		sp = sp_in_global;
+		pc = (unsigned long)walk_stackframe;
 	} else {
 		/* task blocked in __switch_to */
 		fp = task->thread.s[0];
@@ -42,7 +43,7 @@ void notrace walk_stackframe(struct task_struct *task, struct pt_regs *regs,
 		unsigned long low, high;
 		struct stackframe *frame;
 
-		if (unlikely(!__kernel_text_address(pc) || !fn(arg, pc)))
+		if (unlikely(!__kernel_text_address(pc) || (level++ >= 1 && !fn(arg, pc))))
 			break;
 
 		/* Validate frame pointer */
diff --git a/arch/riscv/kernel/trace_irq.c b/arch/riscv/kernel/trace_irq.c
new file mode 100644
index 000000000000..095ac976d7da
--- /dev/null
+++ b/arch/riscv/kernel/trace_irq.c
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2022 Changbin Du <changbin.du@gmail.com>
+ */
+
+#include <linux/irqflags.h>
+#include <linux/kprobes.h>
+#include "trace_irq.h"
+
+/*
+ * trace_hardirqs_on/off require the caller to setup frame pointer properly.
+ * Otherwise, CALLER_ADDR1 might trigger an pagging exception in kernel.
+ * Here we add one extra level so they can be safely called by low
+ * level entry code which $fp is used for other purpose.
+ */
+
+void __trace_hardirqs_on(void)
+{
+	trace_hardirqs_on();
+}
+NOKPROBE_SYMBOL(__trace_hardirqs_on);
+
+void __trace_hardirqs_off(void)
+{
+	trace_hardirqs_off();
+}
+NOKPROBE_SYMBOL(__trace_hardirqs_off);
diff --git a/arch/riscv/kernel/trace_irq.h b/arch/riscv/kernel/trace_irq.h
new file mode 100644
index 000000000000..99fe67377e5e
--- /dev/null
+++ b/arch/riscv/kernel/trace_irq.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2022 Changbin Du <changbin.du@gmail.com>
+ */
+#ifndef __TRACE_IRQ_H
+#define __TRACE_IRQ_H
+
+void __trace_hardirqs_on(void);
+void __trace_hardirqs_off(void);
+
+#endif /* __TRACE_IRQ_H */
diff --git a/arch/riscv/kvm/vcpu.c b/arch/riscv/kvm/vcpu.c
index 0c5239e05721..624166004e36 100644
--- a/arch/riscv/kvm/vcpu.c
+++ b/arch/riscv/kvm/vcpu.c
@@ -90,6 +90,7 @@ int kvm_arch_vcpu_precreate(struct kvm *kvm, unsigned int id)
 int kvm_arch_vcpu_create(struct kvm_vcpu *vcpu)
 {
 	struct kvm_cpu_context *cntx;
+	struct kvm_vcpu_csr *reset_csr = &vcpu->arch.guest_reset_csr;
 
 	/* Mark this VCPU never ran */
 	vcpu->arch.ran_atleast_once = false;
@@ -106,6 +107,9 @@ int kvm_arch_vcpu_create(struct kvm_vcpu *vcpu)
 	cntx->hstatus |= HSTATUS_SPVP;
 	cntx->hstatus |= HSTATUS_SPV;
 
+	/* By default, make CY, TM, and IR counters accessible in VU mode */
+	reset_csr->scounteren = 0x7;
+
 	/* Setup VCPU timer */
 	kvm_riscv_vcpu_timer_init(vcpu);
 
@@ -699,6 +703,20 @@ static void kvm_riscv_update_hvip(struct kvm_vcpu *vcpu)
 	csr_write(CSR_HVIP, csr->hvip);
 }
 
+/*
+ * Actually run the vCPU, entering an RCU extended quiescent state (EQS) while
+ * the vCPU is running.
+ *
+ * This must be noinstr as instrumentation may make use of RCU, and this is not
+ * safe during the EQS.
+ */
+static void noinstr kvm_riscv_vcpu_enter_exit(struct kvm_vcpu *vcpu)
+{
+	guest_state_enter_irqoff();
+	__kvm_riscv_switch_to(&vcpu->arch);
+	guest_state_exit_irqoff();
+}
+
 int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu)
 {
 	int ret;
@@ -790,9 +808,9 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu)
 			continue;
 		}
 
-		guest_enter_irqoff();
+		guest_timing_enter_irqoff();
 
-		__kvm_riscv_switch_to(&vcpu->arch);
+		kvm_riscv_vcpu_enter_exit(vcpu);
 
 		vcpu->mode = OUTSIDE_GUEST_MODE;
 		vcpu->stat.exits++;
@@ -812,25 +830,21 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu)
 		kvm_riscv_vcpu_sync_interrupts(vcpu);
 
 		/*
-		 * We may have taken a host interrupt in VS/VU-mode (i.e.
-		 * while executing the guest). This interrupt is still
-		 * pending, as we haven't serviced it yet!
+		 * We must ensure that any pending interrupts are taken before
+		 * we exit guest timing so that timer ticks are accounted as
+		 * guest time. Transiently unmask interrupts so that any
+		 * pending interrupts are taken.
 		 *
-		 * We're now back in HS-mode with interrupts disabled
-		 * so enabling the interrupts now will have the effect
-		 * of taking the interrupt again, in HS-mode this time.
+		 * There's no barrier which ensures that pending interrupts are
+		 * recognised, so we just hope that the CPU takes any pending
+		 * interrupts between the enable and disable.
 		 */
 		local_irq_enable();
+		local_irq_disable();
 
-		/*
-		 * We do local_irq_enable() before calling guest_exit() so
-		 * that if a timer interrupt hits while running the guest
-		 * we account that tick as being spent in the guest. We
-		 * enable preemption after calling guest_exit() so that if
-		 * we get preempted we make sure ticks after that is not
-		 * counted as guest time.
-		 */
-		guest_exit();
+		guest_timing_exit_irqoff();
+
+		local_irq_enable();
 
 		preempt_enable();
 
diff --git a/arch/riscv/kvm/vcpu_sbi_base.c b/arch/riscv/kvm/vcpu_sbi_base.c
index 4ecf377f483b..48f431091cdb 100644
--- a/arch/riscv/kvm/vcpu_sbi_base.c
+++ b/arch/riscv/kvm/vcpu_sbi_base.c
@@ -9,6 +9,7 @@
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/kvm_host.h>
+#include <linux/version.h>
 #include <asm/csr.h>
 #include <asm/sbi.h>
 #include <asm/kvm_vcpu_timer.h>
@@ -32,7 +33,7 @@ static int kvm_sbi_ext_base_handler(struct kvm_vcpu *vcpu, struct kvm_run *run,
 		*out_val = KVM_SBI_IMPID;
 		break;
 	case SBI_EXT_BASE_GET_IMP_VERSION:
-		*out_val = 0;
+		*out_val = LINUX_VERSION_CODE;
 		break;
 	case SBI_EXT_BASE_PROBE_EXT:
 		if ((cp->a0 >= SBI_EXT_EXPERIMENTAL_START &&
diff --git a/arch/riscv/mm/Makefile b/arch/riscv/mm/Makefile
index 7ebaef10ea1b..ac7a25298a04 100644
--- a/arch/riscv/mm/Makefile
+++ b/arch/riscv/mm/Makefile
@@ -24,6 +24,9 @@ obj-$(CONFIG_KASAN)   += kasan_init.o
 ifdef CONFIG_KASAN
 KASAN_SANITIZE_kasan_init.o := n
 KASAN_SANITIZE_init.o := n
+ifdef CONFIG_DEBUG_VIRTUAL
+KASAN_SANITIZE_physaddr.o := n
+endif
 endif
 
 obj-$(CONFIG_DEBUG_VIRTUAL) += physaddr.o
diff --git a/arch/riscv/mm/extable.c b/arch/riscv/mm/extable.c
index 05978f78579f..35484d830fd6 100644
--- a/arch/riscv/mm/extable.c
+++ b/arch/riscv/mm/extable.c
@@ -33,7 +33,7 @@ static inline void regs_set_gpr(struct pt_regs *regs, unsigned int offset,
 	if (unlikely(offset > MAX_REG_OFFSET))
 		return;
 
-	if (!offset)
+	if (offset)
 		*(unsigned long *)((unsigned long)regs + offset) = val;
 }
 
@@ -43,8 +43,8 @@ static bool ex_handler_uaccess_err_zero(const struct exception_table_entry *ex,
 	int reg_err = FIELD_GET(EX_DATA_REG_ERR, ex->data);
 	int reg_zero = FIELD_GET(EX_DATA_REG_ZERO, ex->data);
 
-	regs_set_gpr(regs, reg_err, -EFAULT);
-	regs_set_gpr(regs, reg_zero, 0);
+	regs_set_gpr(regs, reg_err * sizeof(unsigned long), -EFAULT);
+	regs_set_gpr(regs, reg_zero * sizeof(unsigned long), 0);
 
 	regs->epc = get_ex_fixup(ex);
 	return true;
diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
index cf4d018b7d66..0d588032d6e6 100644
--- a/arch/riscv/mm/init.c
+++ b/arch/riscv/mm/init.c
@@ -125,7 +125,6 @@ void __init mem_init(void)
 	else
 		swiotlb_force = SWIOTLB_NO_FORCE;
 #endif
-	high_memory = (void *)(__va(PFN_PHYS(max_low_pfn)));
 	memblock_free_all();
 
 	print_vm_layout();
@@ -195,6 +194,7 @@ static void __init setup_bootmem(void)
 
 	min_low_pfn = PFN_UP(phys_ram_base);
 	max_low_pfn = max_pfn = PFN_DOWN(phys_ram_end);
+	high_memory = (void *)(__va(PFN_PHYS(max_low_pfn)));
 
 	dma32_phys_limit = min(4UL * SZ_1G, (unsigned long)PFN_PHYS(max_low_pfn));
 	set_max_mapnr(max_low_pfn - ARCH_PFN_OFFSET);
@@ -232,6 +232,7 @@ static pmd_t __maybe_unused early_dtb_pmd[PTRS_PER_PMD] __initdata __aligned(PAG
 
 #ifdef CONFIG_XIP_KERNEL
 #define pt_ops			(*(struct pt_alloc_ops *)XIP_FIXUP(&pt_ops))
+#define riscv_pfn_base         (*(unsigned long  *)XIP_FIXUP(&riscv_pfn_base))
 #define trampoline_pg_dir      ((pgd_t *)XIP_FIXUP(trampoline_pg_dir))
 #define fixmap_pte             ((pte_t *)XIP_FIXUP(fixmap_pte))
 #define early_pg_dir           ((pgd_t *)XIP_FIXUP(early_pg_dir))
@@ -522,6 +523,7 @@ static uintptr_t __init best_map_size(phys_addr_t base, phys_addr_t size)
 }
 
 #ifdef CONFIG_XIP_KERNEL
+#define phys_ram_base  (*(phys_addr_t *)XIP_FIXUP(&phys_ram_base))
 extern char _xiprom[], _exiprom[], __data_loc;
 
 /* called from head.S with MMU off */
diff --git a/arch/riscv/mm/kasan_init.c b/arch/riscv/mm/kasan_init.c
index f61f7ca6fe0f..cd1a145257b7 100644
--- a/arch/riscv/mm/kasan_init.c
+++ b/arch/riscv/mm/kasan_init.c
@@ -113,8 +113,11 @@ static void __init kasan_populate_pud(pgd_t *pgd,
 		base_pud = pt_ops.get_pud_virt(pfn_to_phys(_pgd_pfn(*pgd)));
 	} else {
 		base_pud = (pud_t *)pgd_page_vaddr(*pgd);
-		if (base_pud == lm_alias(kasan_early_shadow_pud))
+		if (base_pud == lm_alias(kasan_early_shadow_pud)) {
 			base_pud = memblock_alloc(PTRS_PER_PUD * sizeof(pud_t), PAGE_SIZE);
+			memcpy(base_pud, (void *)kasan_early_shadow_pud,
+			       sizeof(pud_t) * PTRS_PER_PUD);
+		}
 	}
 
 	pudp = base_pud + pud_index(vaddr);
@@ -202,8 +205,7 @@ asmlinkage void __init kasan_early_init(void)
 
 	for (i = 0; i < PTRS_PER_PTE; ++i)
 		set_pte(kasan_early_shadow_pte + i,
-			mk_pte(virt_to_page(kasan_early_shadow_page),
-			       PAGE_KERNEL));
+			pfn_pte(virt_to_pfn(kasan_early_shadow_page), PAGE_KERNEL));
 
 	for (i = 0; i < PTRS_PER_PMD; ++i)
 		set_pmd(kasan_early_shadow_pmd + i,
diff --git a/arch/riscv/mm/physaddr.c b/arch/riscv/mm/physaddr.c
index e7fd0c253c7b..19cf25a74ee2 100644
--- a/arch/riscv/mm/physaddr.c
+++ b/arch/riscv/mm/physaddr.c
@@ -8,12 +8,10 @@
 
 phys_addr_t __virt_to_phys(unsigned long x)
 {
-	phys_addr_t y = x - PAGE_OFFSET;
-
 	/*
 	 * Boundary checking aginst the kernel linear mapping space.
 	 */
-	WARN(y >= KERN_VIRT_SIZE,
+	WARN(!is_linear_mapping(x) && !is_kernel_mapping(x),
 	     "virt_to_phys used for non-linear address: %pK (%pS)\n",
 	     (void *)x, (void *)x);
 
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index be9f39fd06df..2e11ef97c8b9 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -55,11 +55,13 @@ config S390
 	# Note: keep this list sorted alphabetically
 	#
 	imply IMA_SECURE_AND_OR_TRUSTED_BOOT
+	select ALTERNATE_USER_ADDRESS_SPACE
 	select ARCH_32BIT_USTAT_F_TINODE
 	select ARCH_BINFMT_ELF_STATE
 	select ARCH_ENABLE_MEMORY_HOTPLUG if SPARSEMEM
 	select ARCH_ENABLE_MEMORY_HOTREMOVE
 	select ARCH_ENABLE_SPLIT_PMD_PTLOCK if PGTABLE_LEVELS > 2
+	select ARCH_HAS_CURRENT_STACK_POINTER
 	select ARCH_HAS_DEBUG_VM_PGTABLE
 	select ARCH_HAS_DEBUG_WX
 	select ARCH_HAS_DEVMEM_IS_ALLOWED
diff --git a/arch/s390/include/asm/extable.h b/arch/s390/include/asm/extable.h
index 16dc57dd90b3..8511f0e59290 100644
--- a/arch/s390/include/asm/extable.h
+++ b/arch/s390/include/asm/extable.h
@@ -69,8 +69,13 @@ static inline void swap_ex_entry_fixup(struct exception_table_entry *a,
 {
 	a->fixup = b->fixup + delta;
 	b->fixup = tmp.fixup - delta;
-	a->handler = b->handler + delta;
-	b->handler = tmp.handler - delta;
+	a->handler = b->handler;
+	if (a->handler)
+		a->handler += delta;
+	b->handler = tmp.handler;
+	if (b->handler)
+		b->handler -= delta;
 }
+#define swap_ex_entry_fixup swap_ex_entry_fixup
 
 #endif
diff --git a/arch/s390/include/asm/ftrace.h b/arch/s390/include/asm/ftrace.h
index 267f70f4393f..6f80ec9c04be 100644
--- a/arch/s390/include/asm/ftrace.h
+++ b/arch/s390/include/asm/ftrace.h
@@ -47,15 +47,17 @@ struct ftrace_regs {
 
 static __always_inline struct pt_regs *arch_ftrace_get_regs(struct ftrace_regs *fregs)
 {
-	return &fregs->regs;
+	struct pt_regs *regs = &fregs->regs;
+
+	if (test_pt_regs_flag(regs, PIF_FTRACE_FULL_REGS))
+		return regs;
+	return NULL;
 }
 
 static __always_inline void ftrace_instruction_pointer_set(struct ftrace_regs *fregs,
 							   unsigned long ip)
 {
-	struct pt_regs *regs = arch_ftrace_get_regs(fregs);
-
-	regs->psw.addr = ip;
+	fregs->regs.psw.addr = ip;
 }
 
 /*
diff --git a/arch/s390/include/asm/ptrace.h b/arch/s390/include/asm/ptrace.h
index 4ffa8e7f0ed3..ddb70fb13fbc 100644
--- a/arch/s390/include/asm/ptrace.h
+++ b/arch/s390/include/asm/ptrace.h
@@ -15,11 +15,13 @@
 #define PIF_EXECVE_PGSTE_RESTART	1	/* restart execve for PGSTE binaries */
 #define PIF_SYSCALL_RET_SET		2	/* return value was set via ptrace */
 #define PIF_GUEST_FAULT			3	/* indicates program check in sie64a */
+#define PIF_FTRACE_FULL_REGS		4	/* all register contents valid (ftrace) */
 
 #define _PIF_SYSCALL			BIT(PIF_SYSCALL)
 #define _PIF_EXECVE_PGSTE_RESTART	BIT(PIF_EXECVE_PGSTE_RESTART)
 #define _PIF_SYSCALL_RET_SET		BIT(PIF_SYSCALL_RET_SET)
 #define _PIF_GUEST_FAULT		BIT(PIF_GUEST_FAULT)
+#define _PIF_FTRACE_FULL_REGS		BIT(PIF_FTRACE_FULL_REGS)
 
 #ifndef __ASSEMBLY__
 
diff --git a/arch/s390/include/asm/uaccess.h b/arch/s390/include/asm/uaccess.h
index d74e26b48604..5cb258cd9d29 100644
--- a/arch/s390/include/asm/uaccess.h
+++ b/arch/s390/include/asm/uaccess.h
@@ -17,22 +17,10 @@
 #include <asm/ctl_reg.h>
 #include <asm/extable.h>
 #include <asm/facility.h>
+#include <asm-generic/access_ok.h>
 
 void debug_user_asce(int exit);
 
-static inline int __range_ok(unsigned long addr, unsigned long size)
-{
-	return 1;
-}
-
-#define __access_ok(addr, size)				\
-({							\
-	__chk_user_ptr(addr);				\
-	__range_ok((unsigned long)(addr), (size));	\
-})
-
-#define access_ok(addr, size) __access_ok(addr, size)
-
 unsigned long __must_check
 raw_copy_from_user(void *to, const void __user *from, unsigned long n);
 
@@ -282,8 +270,6 @@ static inline unsigned long __must_check clear_user(void __user *to, unsigned lo
 int copy_to_user_real(void __user *dest, void *src, unsigned long count);
 void *s390_kernel_write(void *dst, const void *src, size_t size);
 
-#define HAVE_GET_KERNEL_NOFAULT
-
 int __noreturn __put_kernel_bad(void);
 
 #define __put_kernel_asm(val, to, insn)					\
diff --git a/arch/s390/include/uapi/asm/signal.h b/arch/s390/include/uapi/asm/signal.h
index 0189f326aac5..e74d6ba1bd3b 100644
--- a/arch/s390/include/uapi/asm/signal.h
+++ b/arch/s390/include/uapi/asm/signal.h
@@ -108,7 +108,7 @@ struct sigaction {
 typedef struct sigaltstack {
         void __user *ss_sp;
         int ss_flags;
-        size_t ss_size;
+	__kernel_size_t ss_size;
 } stack_t;
 
 
diff --git a/arch/s390/kernel/ftrace.c b/arch/s390/kernel/ftrace.c
index 21d62d8b6b9a..89c0870d5679 100644
--- a/arch/s390/kernel/ftrace.c
+++ b/arch/s390/kernel/ftrace.c
@@ -159,9 +159,38 @@ int ftrace_init_nop(struct module *mod, struct dyn_ftrace *rec)
 	return 0;
 }
 
+static struct ftrace_hotpatch_trampoline *ftrace_get_trampoline(struct dyn_ftrace *rec)
+{
+	struct ftrace_hotpatch_trampoline *trampoline;
+	struct ftrace_insn insn;
+	s64 disp;
+	u16 opc;
+
+	if (copy_from_kernel_nofault(&insn, (void *)rec->ip, sizeof(insn)))
+		return ERR_PTR(-EFAULT);
+	disp = (s64)insn.disp * 2;
+	trampoline = (void *)(rec->ip + disp);
+	if (get_kernel_nofault(opc, &trampoline->brasl_opc))
+		return ERR_PTR(-EFAULT);
+	if (opc != 0xc015)
+		return ERR_PTR(-EINVAL);
+	return trampoline;
+}
+
 int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr,
 		       unsigned long addr)
 {
+	struct ftrace_hotpatch_trampoline *trampoline;
+	u64 old;
+
+	trampoline = ftrace_get_trampoline(rec);
+	if (IS_ERR(trampoline))
+		return PTR_ERR(trampoline);
+	if (get_kernel_nofault(old, &trampoline->interceptor))
+		return -EFAULT;
+	if (old != old_addr)
+		return -EINVAL;
+	s390_kernel_write(&trampoline->interceptor, &addr, sizeof(addr));
 	return 0;
 }
 
@@ -188,6 +217,12 @@ static void brcl_enable(void *brcl)
 
 int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
 {
+	struct ftrace_hotpatch_trampoline *trampoline;
+
+	trampoline = ftrace_get_trampoline(rec);
+	if (IS_ERR(trampoline))
+		return PTR_ERR(trampoline);
+	s390_kernel_write(&trampoline->interceptor, &addr, sizeof(addr));
 	brcl_enable((void *)rec->ip);
 	return 0;
 }
@@ -291,7 +326,7 @@ void kprobe_ftrace_handler(unsigned long ip, unsigned long parent_ip,
 
 	regs = ftrace_get_regs(fregs);
 	p = get_kprobe((kprobe_opcode_t *)ip);
-	if (unlikely(!p) || kprobe_disabled(p))
+	if (!regs || unlikely(!p) || kprobe_disabled(p))
 		goto out;
 
 	if (kprobe_running()) {
diff --git a/arch/s390/kernel/mcount.S b/arch/s390/kernel/mcount.S
index 39bcc0e39a10..a24177dcd12a 100644
--- a/arch/s390/kernel/mcount.S
+++ b/arch/s390/kernel/mcount.S
@@ -27,6 +27,7 @@ ENDPROC(ftrace_stub)
 #define STACK_PTREGS_GPRS	(STACK_PTREGS + __PT_GPRS)
 #define STACK_PTREGS_PSW	(STACK_PTREGS + __PT_PSW)
 #define STACK_PTREGS_ORIG_GPR2	(STACK_PTREGS + __PT_ORIG_GPR2)
+#define STACK_PTREGS_FLAGS	(STACK_PTREGS + __PT_FLAGS)
 #ifdef __PACK_STACK
 /* allocate just enough for r14, r15 and backchain */
 #define TRACED_FUNC_FRAME_SIZE	24
@@ -57,6 +58,14 @@ ENDPROC(ftrace_stub)
 	.if \allregs == 1
 	stg	%r14,(STACK_PTREGS_PSW)(%r15)
 	stosm	(STACK_PTREGS_PSW)(%r15),0
+#ifdef CONFIG_HAVE_MARCH_Z10_FEATURES
+	mvghi	STACK_PTREGS_FLAGS(%r15),_PIF_FTRACE_FULL_REGS
+#else
+	lghi	%r14,_PIF_FTRACE_FULL_REGS
+	stg	%r14,STACK_PTREGS_FLAGS(%r15)
+#endif
+	.else
+	xc	STACK_PTREGS_FLAGS(8,%r15),STACK_PTREGS_FLAGS(%r15)
 	.endif
 
 	lg	%r14,(__SF_GPRS+8*8)(%r1)	# restore original return address
diff --git a/arch/s390/kernel/numa.c b/arch/s390/kernel/numa.c
index 51c5a9f6e525..23ab9f02f278 100644
--- a/arch/s390/kernel/numa.c
+++ b/arch/s390/kernel/numa.c
@@ -33,10 +33,3 @@ void __init numa_setup(void)
 	NODE_DATA(0)->node_spanned_pages = memblock_end_of_DRAM() >> PAGE_SHIFT;
 	NODE_DATA(0)->node_id = 0;
 }
-
-static int __init numa_init_late(void)
-{
-	register_one_node(0);
-	return 0;
-}
-arch_initcall(numa_init_late);
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index f2c25d113e7b..05327be3a982 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -800,6 +800,8 @@ static void __init check_initrd(void)
 static void __init reserve_kernel(void)
 {
 	memblock_reserve(0, STARTUP_NORMAL_OFFSET);
+	memblock_reserve(OLDMEM_BASE, sizeof(unsigned long));
+	memblock_reserve(OLDMEM_SIZE, sizeof(unsigned long));
 	memblock_reserve(__amode31_base, __eamode31 - __samode31);
 	memblock_reserve(__pa(sclp_early_sccb), EXT_SCCB_READ_SCP);
 	memblock_reserve(__pa(_stext), _end - _stext);
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index 577f1ead6a51..2296b1ff1e02 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -4667,6 +4667,8 @@ static long kvm_s390_guest_sida_op(struct kvm_vcpu *vcpu,
 		return -EINVAL;
 	if (mop->size + mop->sida_offset > sida_size(vcpu->arch.sie_block))
 		return -E2BIG;
+	if (!kvm_s390_pv_cpu_is_protected(vcpu))
+		return -EINVAL;
 
 	switch (mop->op) {
 	case KVM_S390_MEMOP_SIDA_READ:
diff --git a/arch/s390/lib/test_modules.c b/arch/s390/lib/test_modules.c
index d056baa8fbb0..9894009fc1f2 100644
--- a/arch/s390/lib/test_modules.c
+++ b/arch/s390/lib/test_modules.c
@@ -5,9 +5,6 @@
 
 #include "test_modules.h"
 
-#define DECLARE_RETURN(i) int test_modules_return_ ## i(void)
-REPEAT_10000(DECLARE_RETURN);
-
 /*
  * Test that modules with many relocations are loaded properly.
  */
diff --git a/arch/s390/lib/test_modules.h b/arch/s390/lib/test_modules.h
index 43b5e4b4af3e..6371fcf17684 100644
--- a/arch/s390/lib/test_modules.h
+++ b/arch/s390/lib/test_modules.h
@@ -47,4 +47,7 @@
 	__REPEAT_10000_1(f, 8); \
 	__REPEAT_10000_1(f, 9)
 
+#define DECLARE_RETURN(i) int test_modules_return_ ## i(void)
+REPEAT_10000(DECLARE_RETURN);
+
 #endif
diff --git a/arch/s390/lib/xor.c b/arch/s390/lib/xor.c
index a963c3d8ad0d..fb924a8041dc 100644
--- a/arch/s390/lib/xor.c
+++ b/arch/s390/lib/xor.c
@@ -11,7 +11,8 @@
 #include <linux/raid/xor.h>
 #include <asm/xor.h>
 
-static void xor_xc_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
+static void xor_xc_2(unsigned long bytes, unsigned long * __restrict p1,
+		     const unsigned long * __restrict p2)
 {
 	asm volatile(
 		"	larl	1,2f\n"
@@ -32,8 +33,9 @@ static void xor_xc_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
 		: "0", "1", "cc", "memory");
 }
 
-static void xor_xc_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-		     unsigned long *p3)
+static void xor_xc_3(unsigned long bytes, unsigned long * __restrict p1,
+		     const unsigned long * __restrict p2,
+		     const unsigned long * __restrict p3)
 {
 	asm volatile(
 		"	larl	1,2f\n"
@@ -58,8 +60,10 @@ static void xor_xc_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
 		: : "0", "1", "cc", "memory");
 }
 
-static void xor_xc_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-		     unsigned long *p3, unsigned long *p4)
+static void xor_xc_4(unsigned long bytes, unsigned long * __restrict p1,
+		     const unsigned long * __restrict p2,
+		     const unsigned long * __restrict p3,
+		     const unsigned long * __restrict p4)
 {
 	asm volatile(
 		"	larl	1,2f\n"
@@ -88,8 +92,11 @@ static void xor_xc_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
 		: : "0", "1", "cc", "memory");
 }
 
-static void xor_xc_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-		     unsigned long *p3, unsigned long *p4, unsigned long *p5)
+static void xor_xc_5(unsigned long bytes, unsigned long * __restrict p1,
+		     const unsigned long * __restrict p2,
+		     const unsigned long * __restrict p3,
+		     const unsigned long * __restrict p4,
+		     const unsigned long * __restrict p5)
 {
 	asm volatile(
 		"	larl	1,2f\n"
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 2474a04ceac4..5f220e903e5a 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -7,6 +7,7 @@ config SUPERH
 	select ARCH_HAVE_CUSTOM_GPIO_H
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG if (GUSA_RB || CPU_SH4A)
 	select ARCH_HAS_BINFMT_FLAT if !MMU
+	select ARCH_HAS_CURRENT_STACK_POINTER
 	select ARCH_HAS_GIGANTIC_PAGE
 	select ARCH_HAS_GCOV_PROFILE_ALL
 	select ARCH_HAS_PTE_SPECIAL
@@ -65,7 +66,6 @@ config SUPERH
 	select PERF_EVENTS
 	select PERF_USE_VMALLOC
 	select RTC_LIB
-	select SET_FS
 	select SPARSE_IRQ
 	select TRACE_IRQFLAGS_SUPPORT
 	help
diff --git a/arch/sh/configs/ap325rxa_defconfig b/arch/sh/configs/ap325rxa_defconfig
index 5193b3e099b9..4d83576b89c6 100644
--- a/arch/sh/configs/ap325rxa_defconfig
+++ b/arch/sh/configs/ap325rxa_defconfig
@@ -93,7 +93,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_932=y
 CONFIG_NLS_ISO8859_1=y
diff --git a/arch/sh/configs/ecovec24_defconfig b/arch/sh/configs/ecovec24_defconfig
index 03cb916819fa..d90d29d44469 100644
--- a/arch/sh/configs/ecovec24_defconfig
+++ b/arch/sh/configs/ecovec24_defconfig
@@ -123,7 +123,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_932=y
 CONFIG_NLS_ISO8859_1=y
diff --git a/arch/sh/configs/landisk_defconfig b/arch/sh/configs/landisk_defconfig
index e6c5ddf070c0..492a0a2e0e36 100644
--- a/arch/sh/configs/landisk_defconfig
+++ b/arch/sh/configs/landisk_defconfig
@@ -108,7 +108,6 @@ CONFIG_UFS_FS=m
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
 CONFIG_SMB_FS=m
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_932=y
diff --git a/arch/sh/configs/sdk7780_defconfig b/arch/sh/configs/sdk7780_defconfig
index 6c719ab4332a..7d6d32359848 100644
--- a/arch/sh/configs/sdk7780_defconfig
+++ b/arch/sh/configs/sdk7780_defconfig
@@ -120,7 +120,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
diff --git a/arch/sh/configs/se7724_defconfig b/arch/sh/configs/se7724_defconfig
index a26f7f1841c7..d817df7cc4a7 100644
--- a/arch/sh/configs/se7724_defconfig
+++ b/arch/sh/configs/se7724_defconfig
@@ -122,7 +122,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_932=y
 CONFIG_NLS_ISO8859_1=y
diff --git a/arch/sh/configs/sh03_defconfig b/arch/sh/configs/sh03_defconfig
index ff502683132e..9fcf68b22dba 100644
--- a/arch/sh/configs/sh03_defconfig
+++ b/arch/sh/configs/sh03_defconfig
@@ -75,7 +75,6 @@ CONFIG_NFS_V3=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_737=m
diff --git a/arch/sh/configs/sh7785lcr_32bit_defconfig b/arch/sh/configs/sh7785lcr_32bit_defconfig
index 5c725c75fcef..7eb3c10f28ad 100644
--- a/arch/sh/configs/sh7785lcr_32bit_defconfig
+++ b/arch/sh/configs/sh7785lcr_32bit_defconfig
@@ -129,7 +129,6 @@ CONFIG_NFS_V3=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_932=y
 CONFIG_NLS_ISO8859_1=y
diff --git a/arch/sh/configs/titan_defconfig b/arch/sh/configs/titan_defconfig
index cd5c58916c65..73a0d68b0de6 100644
--- a/arch/sh/configs/titan_defconfig
+++ b/arch/sh/configs/titan_defconfig
@@ -239,7 +239,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
 CONFIG_SMB_FS=m
 CONFIG_CIFS=m
 CONFIG_PARTITION_ADVANCED=y
diff --git a/arch/sh/include/asm/pgtable_32.h b/arch/sh/include/asm/pgtable_32.h
index 41be43e99cff..d0240decacca 100644
--- a/arch/sh/include/asm/pgtable_32.h
+++ b/arch/sh/include/asm/pgtable_32.h
@@ -406,6 +406,7 @@ static inline unsigned long pmd_page_vaddr(pmd_t pmd)
 	return (unsigned long)pmd_val(pmd);
 }
 
+#define pmd_pfn(pmd)		(__pa(pmd_val(pmd)) >> PAGE_SHIFT)
 #define pmd_page(pmd)		(virt_to_page(pmd_val(pmd)))
 
 #ifdef CONFIG_X2TLB
diff --git a/arch/sh/include/asm/processor.h b/arch/sh/include/asm/processor.h
index 3820d698846e..85a6c1c3c16e 100644
--- a/arch/sh/include/asm/processor.h
+++ b/arch/sh/include/asm/processor.h
@@ -3,7 +3,6 @@
 #define __ASM_SH_PROCESSOR_H
 
 #include <asm/cpu-features.h>
-#include <asm/segment.h>
 #include <asm/cache.h>
 
 #ifndef __ASSEMBLY__
diff --git a/arch/sh/include/asm/segment.h b/arch/sh/include/asm/segment.h
deleted file mode 100644
index 02e54a3335d6..000000000000
--- a/arch/sh/include/asm/segment.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __ASM_SH_SEGMENT_H
-#define __ASM_SH_SEGMENT_H
-
-#ifndef __ASSEMBLY__
-
-typedef struct {
-	unsigned long seg;
-} mm_segment_t;
-
-#define MAKE_MM_SEG(s)	((mm_segment_t) { (s) })
-
-/*
- * The fs value determines whether argument validity checking should be
- * performed or not.  If get_fs() == USER_DS, checking is performed, with
- * get_fs() == KERNEL_DS, checking is bypassed.
- *
- * For historical reasons, these macros are grossly misnamed.
- */
-#define KERNEL_DS	MAKE_MM_SEG(0xFFFFFFFFUL)
-#ifdef CONFIG_MMU
-#define USER_DS		MAKE_MM_SEG(PAGE_OFFSET)
-#else
-#define USER_DS		KERNEL_DS
-#endif
-
-#define uaccess_kernel() (get_fs().seg == KERNEL_DS.seg)
-
-#define get_fs()	(current_thread_info()->addr_limit)
-#define set_fs(x)	(current_thread_info()->addr_limit = (x))
-
-#endif /* __ASSEMBLY__ */
-#endif /* __ASM_SH_SEGMENT_H */
diff --git a/arch/sh/include/asm/thread_info.h b/arch/sh/include/asm/thread_info.h
index 3a2d50d61fc9..1400fbb8b423 100644
--- a/arch/sh/include/asm/thread_info.h
+++ b/arch/sh/include/asm/thread_info.h
@@ -30,7 +30,6 @@ struct thread_info {
 	__u32			status;		/* thread synchronous flags */
 	__u32			cpu;
 	int			preempt_count; /* 0 => preemptable, <0 => BUG */
-	mm_segment_t		addr_limit;	/* thread address space */
 	unsigned long		previous_sp;	/* sp of previous stack in case
 						   of nested IRQ stacks */
 	__u8			supervisor_stack[];
@@ -58,7 +57,6 @@ struct thread_info {
 	.status		= 0,			\
 	.cpu		= 0,			\
 	.preempt_count	= INIT_PREEMPT_COUNT,	\
-	.addr_limit	= KERNEL_DS,		\
 }
 
 /* how to get the current stack pointer from C */
diff --git a/arch/sh/include/asm/uaccess.h b/arch/sh/include/asm/uaccess.h
index 8867bb04b00e..a79609eb14be 100644
--- a/arch/sh/include/asm/uaccess.h
+++ b/arch/sh/include/asm/uaccess.h
@@ -2,30 +2,8 @@
 #ifndef __ASM_SH_UACCESS_H
 #define __ASM_SH_UACCESS_H
 
-#include <asm/segment.h>
 #include <asm/extable.h>
-
-#define __addr_ok(addr) \
-	((unsigned long __force)(addr) < current_thread_info()->addr_limit.seg)
-
-/*
- * __access_ok: Check if address with size is OK or not.
- *
- * Uhhuh, this needs 33-bit arithmetic. We have a carry..
- *
- * sum := addr + size;  carry? --> flag = true;
- * if (sum >= addr_limit) flag = true;
- */
-#define __access_ok(addr, size)	({				\
-	unsigned long __ao_a = (addr), __ao_b = (size);		\
-	unsigned long __ao_end = __ao_a + __ao_b - !!__ao_b;	\
-	__ao_end >= __ao_a && __addr_ok(__ao_end); })
-
-#define access_ok(addr, size)	\
-	(__chk_user_ptr(addr),		\
-	 __access_ok((unsigned long __force)(addr), (size)))
-
-#define user_addr_max()	(current_thread_info()->addr_limit.seg)
+#include <asm-generic/access_ok.h>
 
 /*
  * Uh, these should become the main single-value transfer routines ...
diff --git a/arch/sh/kernel/io_trapped.c b/arch/sh/kernel/io_trapped.c
index 004ad0130b10..e803b14ef12e 100644
--- a/arch/sh/kernel/io_trapped.c
+++ b/arch/sh/kernel/io_trapped.c
@@ -270,7 +270,6 @@ static struct mem_access trapped_io_access = {
 
 int handle_trapped_io(struct pt_regs *regs, unsigned long address)
 {
-	mm_segment_t oldfs;
 	insn_size_t instruction;
 	int tmp;
 
@@ -281,16 +280,12 @@ int handle_trapped_io(struct pt_regs *regs, unsigned long address)
 
 	WARN_ON(user_mode(regs));
 
-	oldfs = get_fs();
-	set_fs(KERNEL_DS);
-	if (copy_from_user(&instruction, (void *)(regs->pc),
-			   sizeof(instruction))) {
-		set_fs(oldfs);
+	if (copy_from_kernel_nofault(&instruction, (void *)(regs->pc),
+				     sizeof(instruction))) {
 		return 0;
 	}
 
 	tmp = handle_unaligned_access(instruction, regs,
 				      &trapped_io_access, 1, address);
-	set_fs(oldfs);
 	return tmp == 0;
 }
diff --git a/arch/sh/kernel/process_32.c b/arch/sh/kernel/process_32.c
index 1c28e3cddb60..ca01286a0610 100644
--- a/arch/sh/kernel/process_32.c
+++ b/arch/sh/kernel/process_32.c
@@ -123,7 +123,6 @@ int copy_thread(unsigned long clone_flags, unsigned long usp, unsigned long arg,
 #if defined(CONFIG_SH_FPU)
 		childregs->sr |= SR_FD;
 #endif
-		ti->addr_limit = KERNEL_DS;
 		ti->status &= ~TS_USEDFPU;
 		p->thread.fpu_counter = 0;
 		return 0;
@@ -132,7 +131,6 @@ int copy_thread(unsigned long clone_flags, unsigned long usp, unsigned long arg,
 
 	if (usp)
 		childregs->regs[15] = usp;
-	ti->addr_limit = USER_DS;
 
 	if (clone_flags & CLONE_SETTLS)
 		childregs->gbr = tls;
diff --git a/arch/sh/kernel/topology.c b/arch/sh/kernel/topology.c
index 76af6db9daa2..2d2a7509b565 100644
--- a/arch/sh/kernel/topology.c
+++ b/arch/sh/kernel/topology.c
@@ -46,11 +46,6 @@ static int __init topology_init(void)
 {
 	int i, ret;
 
-#ifdef CONFIG_NUMA
-	for_each_online_node(i)
-		register_one_node(i);
-#endif
-
 	for_each_present_cpu(i) {
 		struct cpu *c = &per_cpu(cpu_devices, i);
 
diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c
index b3c715bc254b..6cdda3a621a1 100644
--- a/arch/sh/kernel/traps_32.c
+++ b/arch/sh/kernel/traps_32.c
@@ -75,6 +75,23 @@ static struct mem_access user_mem_access = {
 	copy_to_user,
 };
 
+static unsigned long copy_from_kernel_wrapper(void *dst, const void __user *src,
+					      unsigned long cnt)
+{
+	return copy_from_kernel_nofault(dst, (const void __force *)src, cnt);
+}
+
+static unsigned long copy_to_kernel_wrapper(void __user *dst, const void *src,
+					    unsigned long cnt)
+{
+	return copy_to_kernel_nofault((void __force *)dst, src, cnt);
+}
+
+static struct mem_access kernel_mem_access = {
+	copy_from_kernel_wrapper,
+	copy_to_kernel_wrapper,
+};
+
 /*
  * handle an instruction that does an unaligned memory access by emulating the
  * desired behaviour
@@ -473,7 +490,6 @@ asmlinkage void do_address_error(struct pt_regs *regs,
 				 unsigned long address)
 {
 	unsigned long error_code = 0;
-	mm_segment_t oldfs;
 	insn_size_t instruction;
 	int tmp;
 
@@ -489,13 +505,10 @@ asmlinkage void do_address_error(struct pt_regs *regs,
 		local_irq_enable();
 		inc_unaligned_user_access();
 
-		oldfs = force_uaccess_begin();
 		if (copy_from_user(&instruction, (insn_size_t __user *)(regs->pc & ~1),
 				   sizeof(instruction))) {
-			force_uaccess_end(oldfs);
 			goto uspace_segv;
 		}
-		force_uaccess_end(oldfs);
 
 		/* shout about userspace fixups */
 		unaligned_fixups_notify(current, instruction, regs);
@@ -518,11 +531,9 @@ fixup:
 			goto uspace_segv;
 		}
 
-		oldfs = force_uaccess_begin();
 		tmp = handle_unaligned_access(instruction, regs,
 					      &user_mem_access, 0,
 					      address);
-		force_uaccess_end(oldfs);
 
 		if (tmp == 0)
 			return; /* sorted */
@@ -538,21 +549,18 @@ uspace_segv:
 		if (regs->pc & 1)
 			die("unaligned program counter", regs, error_code);
 
-		set_fs(KERNEL_DS);
-		if (copy_from_user(&instruction, (void __user *)(regs->pc),
+		if (copy_from_kernel_nofault(&instruction, (void *)(regs->pc),
 				   sizeof(instruction))) {
 			/* Argh. Fault on the instruction itself.
 			   This should never happen non-SMP
 			*/
-			set_fs(oldfs);
 			die("insn faulting in do_address_error", regs, 0);
 		}
 
 		unaligned_fixups_notify(current, instruction, regs);
 
-		handle_unaligned_access(instruction, regs, &user_mem_access,
+		handle_unaligned_access(instruction, regs, &kernel_mem_access,
 					0, address);
-		set_fs(oldfs);
 	}
 }
 
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 1cab1b284f1a..9200bc04701c 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -46,7 +46,6 @@ config SPARC
 	select LOCKDEP_SMALL if LOCKDEP
 	select NEED_DMA_MAP_STATE
 	select NEED_SG_DMA_LENGTH
-	select SET_FS
 	select TRACE_IRQFLAGS_SUPPORT
 
 config SPARC32
@@ -62,6 +61,7 @@ config SPARC32
 
 config SPARC64
 	def_bool 64BIT
+	select ALTERNATE_USER_ADDRESS_SPACE
 	select HAVE_FUNCTION_TRACER
 	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_KRETPROBES
diff --git a/arch/sparc/include/asm/agp.h b/arch/sparc/include/asm/agp.h
index efe0d6a12e5a..2d0ff84cee3f 100644
--- a/arch/sparc/include/asm/agp.h
+++ b/arch/sparc/include/asm/agp.h
@@ -4,9 +4,9 @@
 
 /* dummy for now */
 
-#define map_page_into_agp(page)
-#define unmap_page_from_agp(page)
-#define flush_agp_cache() mb()
+#define map_page_into_agp(page)		do { } while (0)
+#define unmap_page_from_agp(page)	do { } while (0)
+#define flush_agp_cache()		mb()
 
 /* GATT allocation. Returns/accepts GATT kernel virtual address. */
 #define alloc_gatt_pages(order)		\
diff --git a/arch/sparc/include/asm/pgtable_32.h b/arch/sparc/include/asm/pgtable_32.h
index ffccfe3b22ed..4866625da314 100644
--- a/arch/sparc/include/asm/pgtable_32.h
+++ b/arch/sparc/include/asm/pgtable_32.h
@@ -127,11 +127,16 @@ static inline int srmmu_device_memory(unsigned long x)
 	return ((x & 0xF0000000) != 0);
 }
 
+static inline unsigned long pmd_pfn(pmd_t pmd)
+{
+	return (pmd_val(pmd) & SRMMU_PTD_PMASK) >> (PAGE_SHIFT-4);
+}
+
 static inline struct page *pmd_page(pmd_t pmd)
 {
 	if (srmmu_device_memory(pmd_val(pmd)))
 		BUG();
-	return pfn_to_page((pmd_val(pmd) & SRMMU_PTD_PMASK) >> (PAGE_SHIFT-4));
+	return pfn_to_page(pmd_pfn(pmd));
 }
 
 static inline unsigned long __pmd_page(pmd_t pmd)
diff --git a/arch/sparc/include/asm/processor_32.h b/arch/sparc/include/asm/processor_32.h
index 647bf0ac7beb..b26c35336b51 100644
--- a/arch/sparc/include/asm/processor_32.h
+++ b/arch/sparc/include/asm/processor_32.h
@@ -32,10 +32,6 @@ struct fpq {
 };
 #endif
 
-typedef struct {
-	int seg;
-} mm_segment_t;
-
 /* The Sparc processor specific thread struct. */
 struct thread_struct {
 	struct pt_regs *kregs;
@@ -50,11 +46,9 @@ struct thread_struct {
 	unsigned long   fsr;
 	unsigned long   fpqdepth;
 	struct fpq	fpqueue[16];
-	mm_segment_t current_ds;
 };
 
 #define INIT_THREAD  { \
-	.current_ds = KERNEL_DS, \
 	.kregs = (struct pt_regs *)(init_stack+THREAD_SIZE)-1 \
 }
 
diff --git a/arch/sparc/include/asm/processor_64.h b/arch/sparc/include/asm/processor_64.h
index ae851e8fce4c..89850dff6b03 100644
--- a/arch/sparc/include/asm/processor_64.h
+++ b/arch/sparc/include/asm/processor_64.h
@@ -47,10 +47,6 @@
 
 #ifndef __ASSEMBLY__
 
-typedef struct {
-	unsigned char seg;
-} mm_segment_t;
-
 /* The Sparc processor specific thread struct. */
 /* XXX This should die, everything can go into thread_info now. */
 struct thread_struct {
diff --git a/arch/sparc/include/asm/switch_to_64.h b/arch/sparc/include/asm/switch_to_64.h
index b1d4e2e3210f..14f3c49bfdbc 100644
--- a/arch/sparc/include/asm/switch_to_64.h
+++ b/arch/sparc/include/asm/switch_to_64.h
@@ -20,10 +20,8 @@ do {						\
 	 */
 #define switch_to(prev, next, last)					\
 do {	save_and_clear_fpu();						\
-	/* If you are tempted to conditionalize the following */	\
-	/* so that ASI is only written if it changes, think again. */	\
 	__asm__ __volatile__("wr %%g0, %0, %%asi"			\
-	: : "r" (task_thread_info(next)->current_ds));\
+	: : "r" (ASI_AIUS));						\
 	trap_block[current_thread_info()->cpu].thread =			\
 		task_thread_info(next);					\
 	__asm__ __volatile__(						\
diff --git a/arch/sparc/include/asm/thread_info_64.h b/arch/sparc/include/asm/thread_info_64.h
index 8047a9caab2f..1a44372e2bc0 100644
--- a/arch/sparc/include/asm/thread_info_64.h
+++ b/arch/sparc/include/asm/thread_info_64.h
@@ -46,7 +46,7 @@ struct thread_info {
 	struct pt_regs		*kregs;
 	int			preempt_count;	/* 0 => preemptable, <0 => BUG */
 	__u8			new_child;
-	__u8			current_ds;
+	__u8			__pad;
 	__u16			cpu;
 
 	unsigned long		*utraps;
@@ -81,7 +81,6 @@ struct thread_info {
 #define TI_KREGS	0x00000028
 #define TI_PRE_COUNT	0x00000030
 #define TI_NEW_CHILD	0x00000034
-#define TI_CURRENT_DS	0x00000035
 #define TI_CPU		0x00000036
 #define TI_UTRAPS	0x00000038
 #define TI_REG_WINDOW	0x00000040
@@ -116,7 +115,6 @@ struct thread_info {
 #define INIT_THREAD_INFO(tsk)				\
 {							\
 	.task		=	&tsk,			\
-	.current_ds	=	ASI_P,			\
 	.preempt_count	=	INIT_PREEMPT_COUNT,	\
 	.kregs		=	(struct pt_regs *)(init_stack+THREAD_SIZE)-1 \
 }
diff --git a/arch/sparc/include/asm/uaccess.h b/arch/sparc/include/asm/uaccess.h
index 390094200fc4..ee75f69e3fcd 100644
--- a/arch/sparc/include/asm/uaccess.h
+++ b/arch/sparc/include/asm/uaccess.h
@@ -10,9 +10,6 @@
 #include <asm/uaccess_32.h>
 #endif
 
-#define user_addr_max() \
-	(uaccess_kernel() ? ~0UL : TASK_SIZE)
-
 long strncpy_from_user(char *dest, const char __user *src, long count);
 
 #endif
diff --git a/arch/sparc/include/asm/uaccess_32.h b/arch/sparc/include/asm/uaccess_32.h
index 4a12346bb69c..9fd6c53644b6 100644
--- a/arch/sparc/include/asm/uaccess_32.h
+++ b/arch/sparc/include/asm/uaccess_32.h
@@ -12,30 +12,7 @@
 #include <linux/string.h>
 
 #include <asm/processor.h>
-
-/* Sparc is not segmented, however we need to be able to fool access_ok()
- * when doing system calls from kernel mode legitimately.
- *
- * "For historical reasons, these macros are grossly misnamed." -Linus
- */
-
-#define KERNEL_DS   ((mm_segment_t) { 0 })
-#define USER_DS     ((mm_segment_t) { -1 })
-
-#define get_fs()	(current->thread.current_ds)
-#define set_fs(val)	((current->thread.current_ds) = (val))
-
-#define uaccess_kernel() (get_fs().seg == KERNEL_DS.seg)
-
-/* We have there a nice not-mapped page at PAGE_OFFSET - PAGE_SIZE, so that this test
- * can be fairly lightweight.
- * No one can read/write anything from userland in the kernel space by setting
- * large size and address near to PAGE_OFFSET - a fault will break his intentions.
- */
-#define __user_ok(addr, size) ({ (void)(size); (addr) < STACK_TOP; })
-#define __kernel_ok (uaccess_kernel())
-#define __access_ok(addr, size) (__user_ok((addr) & get_fs().seg, (size)))
-#define access_ok(addr, size) __access_ok((unsigned long)(addr), size)
+#include <asm-generic/access_ok.h>
 
 /* Uh, these should become the main single-value transfer routines..
  * They automatically use the right size if we just have the right
@@ -47,13 +24,13 @@
  * and hide all the ugliness from the user.
  */
 #define put_user(x, ptr) ({ \
-	unsigned long __pu_addr = (unsigned long)(ptr); \
+	void __user *__pu_addr = (ptr); \
 	__chk_user_ptr(ptr); \
 	__put_user_check((__typeof__(*(ptr)))(x), __pu_addr, sizeof(*(ptr))); \
 })
 
 #define get_user(x, ptr) ({ \
-	unsigned long __gu_addr = (unsigned long)(ptr); \
+	const void __user *__gu_addr = (ptr); \
 	__chk_user_ptr(ptr); \
 	__get_user_check((x), __gu_addr, sizeof(*(ptr)), __typeof__(*(ptr))); \
 })
@@ -232,7 +209,7 @@ static inline unsigned long __clear_user(void __user *addr, unsigned long size)
 
 static inline unsigned long clear_user(void __user *addr, unsigned long n)
 {
-	if (n && __access_ok((unsigned long) addr, n))
+	if (n && __access_ok(addr, n))
 		return __clear_user(addr, n);
 	else
 		return n;
diff --git a/arch/sparc/include/asm/uaccess_64.h b/arch/sparc/include/asm/uaccess_64.h
index 30eb4c6414d1..94266a5c5b04 100644
--- a/arch/sparc/include/asm/uaccess_64.h
+++ b/arch/sparc/include/asm/uaccess_64.h
@@ -12,33 +12,15 @@
 #include <asm/spitfire.h>
 
 #include <asm/processor.h>
+#include <asm-generic/access_ok.h>
 
 /*
  * Sparc64 is segmented, though more like the M68K than the I386.
  * We use the secondary ASI to address user memory, which references a
  * completely different VM map, thus there is zero chance of the user
  * doing something queer and tricking us into poking kernel memory.
- *
- * What is left here is basically what is needed for the other parts of
- * the kernel that expect to be able to manipulate, erum, "segments".
- * Or perhaps more properly, permissions.
- *
- * "For historical reasons, these macros are grossly misnamed." -Linus
  */
 
-#define KERNEL_DS   ((mm_segment_t) { ASI_P })
-#define USER_DS     ((mm_segment_t) { ASI_AIUS })	/* har har har */
-
-#define get_fs() ((mm_segment_t){(current_thread_info()->current_ds)})
-
-#define uaccess_kernel() (get_fs().seg == KERNEL_DS.seg)
-
-#define set_fs(val)								\
-do {										\
-	current_thread_info()->current_ds = (val).seg;				\
-	__asm__ __volatile__ ("wr %%g0, %0, %%asi" : : "r" ((val).seg));	\
-} while(0)
-
 /*
  * Test whether a block of memory is a valid user space address.
  * Returns 0 if the range is valid, nonzero otherwise.
@@ -61,16 +43,6 @@ static inline bool __chk_range_not_ok(unsigned long addr, unsigned long size, un
 	__chk_range_not_ok((unsigned long __force)(addr), size, limit); \
 })
 
-static inline int __access_ok(const void __user * addr, unsigned long size)
-{
-	return 1;
-}
-
-static inline int access_ok(const void __user * addr, unsigned long size)
-{
-	return 1;
-}
-
 void __retl_efault(void);
 
 /* Uh, these should become the main single-value transfer routines..
@@ -100,6 +72,42 @@ void __retl_efault(void);
 struct __large_struct { unsigned long buf[100]; };
 #define __m(x) ((struct __large_struct *)(x))
 
+#define __put_kernel_nofault(dst, src, type, label)			\
+do {									\
+	type *addr = (type __force *)(dst);				\
+	type data = *(type *)src;					\
+	register int __pu_ret;						\
+	switch (sizeof(type)) {						\
+	case 1: __put_kernel_asm(data, b, addr, __pu_ret); break;	\
+	case 2: __put_kernel_asm(data, h, addr, __pu_ret); break;	\
+	case 4: __put_kernel_asm(data, w, addr, __pu_ret); break;	\
+	case 8: __put_kernel_asm(data, x, addr, __pu_ret); break;	\
+	default: __pu_ret = __put_user_bad(); break;			\
+	}								\
+	if (__pu_ret)							\
+		goto label;						\
+} while (0)
+
+#define __put_kernel_asm(x, size, addr, ret)				\
+__asm__ __volatile__(							\
+		"/* Put kernel asm, inline. */\n"			\
+	"1:\t"	"st"#size " %1, [%2]\n\t"				\
+		"clr	%0\n"						\
+	"2:\n\n\t"							\
+		".section .fixup,#alloc,#execinstr\n\t"			\
+		".align	4\n"						\
+	"3:\n\t"							\
+		"sethi	%%hi(2b), %0\n\t"				\
+		"jmpl	%0 + %%lo(2b), %%g0\n\t"			\
+		" mov	%3, %0\n\n\t"					\
+		".previous\n\t"						\
+		".section __ex_table,\"a\"\n\t"				\
+		".align	4\n\t"						\
+		".word	1b, 3b\n\t"					\
+		".previous\n\n\t"					\
+	       : "=r" (ret) : "r" (x), "r" (__m(addr)),			\
+		 "i" (-EFAULT))
+
 #define __put_user_nocheck(data, addr, size) ({			\
 	register int __pu_ret;					\
 	switch (size) {						\
@@ -134,6 +142,46 @@ __asm__ __volatile__(							\
 
 int __put_user_bad(void);
 
+#define __get_kernel_nofault(dst, src, type, label)			     \
+do {									     \
+	type *addr = (type __force *)(src);		     		     \
+	register int __gu_ret;						     \
+	register unsigned long __gu_val;				     \
+	switch (sizeof(type)) {						     \
+		case 1: __get_kernel_asm(__gu_val, ub, addr, __gu_ret); break; \
+		case 2: __get_kernel_asm(__gu_val, uh, addr, __gu_ret); break; \
+		case 4: __get_kernel_asm(__gu_val, uw, addr, __gu_ret); break; \
+		case 8: __get_kernel_asm(__gu_val, x, addr, __gu_ret); break;  \
+		default:						     \
+			__gu_val = 0;					     \
+			__gu_ret = __get_user_bad();			     \
+			break;						     \
+	} 								     \
+	if (__gu_ret)							     \
+		goto label;						     \
+	*(type *)dst = (__force type) __gu_val;				     \
+} while (0)
+#define __get_kernel_asm(x, size, addr, ret)				\
+__asm__ __volatile__(							\
+		"/* Get kernel asm, inline. */\n"			\
+	"1:\t"	"ld"#size " [%2], %1\n\t"				\
+		"clr	%0\n"						\
+	"2:\n\n\t"							\
+		".section .fixup,#alloc,#execinstr\n\t"			\
+		".align	4\n"						\
+	"3:\n\t"							\
+		"sethi	%%hi(2b), %0\n\t"				\
+		"clr	%1\n\t"						\
+		"jmpl	%0 + %%lo(2b), %%g0\n\t"			\
+		" mov	%3, %0\n\n\t"					\
+		".previous\n\t"						\
+		".section __ex_table,\"a\"\n\t"				\
+		".align	4\n\t"						\
+		".word	1b, 3b\n\n\t"					\
+		".previous\n\t"						\
+	       : "=r" (ret), "=r" (x) : "r" (__m(addr)),		\
+		 "i" (-EFAULT))
+
 #define __get_user_nocheck(data, addr, size, type) ({			     \
 	register int __gu_ret;						     \
 	register unsigned long __gu_val;				     \
diff --git a/arch/sparc/include/asm/xor_32.h b/arch/sparc/include/asm/xor_32.h
index 3e5af37e4b9c..0351813cf3af 100644
--- a/arch/sparc/include/asm/xor_32.h
+++ b/arch/sparc/include/asm/xor_32.h
@@ -13,7 +13,8 @@
  */
 
 static void
-sparc_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
+sparc_2(unsigned long bytes, unsigned long * __restrict p1,
+	const unsigned long * __restrict p2)
 {
 	int lines = bytes / (sizeof (long)) / 8;
 
@@ -50,8 +51,9 @@ sparc_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
 }
 
 static void
-sparc_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-	unsigned long *p3)
+sparc_3(unsigned long bytes, unsigned long * __restrict p1,
+	const unsigned long * __restrict p2,
+	const unsigned long * __restrict p3)
 {
 	int lines = bytes / (sizeof (long)) / 8;
 
@@ -101,8 +103,10 @@ sparc_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
 }
 
 static void
-sparc_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-	unsigned long *p3, unsigned long *p4)
+sparc_4(unsigned long bytes, unsigned long * __restrict p1,
+	const unsigned long * __restrict p2,
+	const unsigned long * __restrict p3,
+	const unsigned long * __restrict p4)
 {
 	int lines = bytes / (sizeof (long)) / 8;
 
@@ -165,8 +169,11 @@ sparc_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
 }
 
 static void
-sparc_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-	unsigned long *p3, unsigned long *p4, unsigned long *p5)
+sparc_5(unsigned long bytes, unsigned long * __restrict p1,
+	const unsigned long * __restrict p2,
+	const unsigned long * __restrict p3,
+	const unsigned long * __restrict p4,
+	const unsigned long * __restrict p5)
 {
 	int lines = bytes / (sizeof (long)) / 8;
 
diff --git a/arch/sparc/include/asm/xor_64.h b/arch/sparc/include/asm/xor_64.h
index 16169f3edcd5..caaddea8ad79 100644
--- a/arch/sparc/include/asm/xor_64.h
+++ b/arch/sparc/include/asm/xor_64.h
@@ -12,13 +12,20 @@
 
 #include <asm/spitfire.h>
 
-void xor_vis_2(unsigned long, unsigned long *, unsigned long *);
-void xor_vis_3(unsigned long, unsigned long *, unsigned long *,
-	       unsigned long *);
-void xor_vis_4(unsigned long, unsigned long *, unsigned long *,
-	       unsigned long *, unsigned long *);
-void xor_vis_5(unsigned long, unsigned long *, unsigned long *,
-	       unsigned long *, unsigned long *, unsigned long *);
+void xor_vis_2(unsigned long bytes, unsigned long * __restrict p1,
+	       const unsigned long * __restrict p2);
+void xor_vis_3(unsigned long bytes, unsigned long * __restrict p1,
+	       const unsigned long * __restrict p2,
+	       const unsigned long * __restrict p3);
+void xor_vis_4(unsigned long bytes, unsigned long * __restrict p1,
+	       const unsigned long * __restrict p2,
+	       const unsigned long * __restrict p3,
+	       const unsigned long * __restrict p4);
+void xor_vis_5(unsigned long bytes, unsigned long * __restrict p1,
+	       const unsigned long * __restrict p2,
+	       const unsigned long * __restrict p3,
+	       const unsigned long * __restrict p4,
+	       const unsigned long * __restrict p5);
 
 /* XXX Ugh, write cheetah versions... -DaveM */
 
@@ -30,13 +37,20 @@ static struct xor_block_template xor_block_VIS = {
         .do_5	= xor_vis_5,
 };
 
-void xor_niagara_2(unsigned long, unsigned long *, unsigned long *);
-void xor_niagara_3(unsigned long, unsigned long *, unsigned long *,
-		   unsigned long *);
-void xor_niagara_4(unsigned long, unsigned long *, unsigned long *,
-		   unsigned long *, unsigned long *);
-void xor_niagara_5(unsigned long, unsigned long *, unsigned long *,
-		   unsigned long *, unsigned long *, unsigned long *);
+void xor_niagara_2(unsigned long bytes, unsigned long * __restrict p1,
+		   const unsigned long * __restrict p2);
+void xor_niagara_3(unsigned long bytes, unsigned long * __restrict p1,
+		   const unsigned long * __restrict p2,
+		   const unsigned long * __restrict p3);
+void xor_niagara_4(unsigned long bytes, unsigned long * __restrict p1,
+		   const unsigned long * __restrict p2,
+		   const unsigned long * __restrict p3,
+		   const unsigned long * __restrict p4);
+void xor_niagara_5(unsigned long bytes, unsigned long * __restrict p1,
+		   const unsigned long * __restrict p2,
+		   const unsigned long * __restrict p3,
+		   const unsigned long * __restrict p4,
+		   const unsigned long * __restrict p5);
 
 static struct xor_block_template xor_block_niagara = {
         .name	= "Niagara",
diff --git a/arch/sparc/include/uapi/asm/shmbuf.h b/arch/sparc/include/uapi/asm/shmbuf.h
index a5d7d8d681c4..ed4f061c7a15 100644
--- a/arch/sparc/include/uapi/asm/shmbuf.h
+++ b/arch/sparc/include/uapi/asm/shmbuf.h
@@ -2,6 +2,9 @@
 #ifndef _SPARC_SHMBUF_H
 #define _SPARC_SHMBUF_H
 
+#include <asm/ipcbuf.h>
+#include <asm/posix_types.h>
+
 /* 
  * The shmid64_ds structure for sparc architecture.
  * Note extra padding because this structure is passed back and forth
@@ -25,7 +28,7 @@ struct shmid64_ds {
 	unsigned long		shm_ctime_high;
 	unsigned long		shm_ctime;	/* last change time */
 #endif
-	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_size_t		shm_segsz;	/* size of segment (bytes) */
 	__kernel_pid_t		shm_cpid;	/* pid of creator */
 	__kernel_pid_t		shm_lpid;	/* pid of last operator */
 	unsigned long		shm_nattch;	/* no. of current attaches */
diff --git a/arch/sparc/include/uapi/asm/signal.h b/arch/sparc/include/uapi/asm/signal.h
index 53758d53ac0e..b61382924725 100644
--- a/arch/sparc/include/uapi/asm/signal.h
+++ b/arch/sparc/include/uapi/asm/signal.h
@@ -151,6 +151,7 @@ struct sigstack {
 
 
 #include <asm-generic/signal-defs.h>
+#include <asm/posix_types.h>
 
 #ifndef __KERNEL__
 struct __new_sigaction {
@@ -171,7 +172,7 @@ struct __old_sigaction {
 typedef struct sigaltstack {
 	void			__user *ss_sp;
 	int			ss_flags;
-	size_t			ss_size;
+	__kernel_size_t		ss_size;
 } stack_t;
 
 
diff --git a/arch/sparc/kernel/process_32.c b/arch/sparc/kernel/process_32.c
index 2dc0bf9fe62e..88c0c14aaff0 100644
--- a/arch/sparc/kernel/process_32.c
+++ b/arch/sparc/kernel/process_32.c
@@ -300,7 +300,6 @@ int copy_thread(unsigned long clone_flags, unsigned long sp, unsigned long arg,
 		extern int nwindows;
 		unsigned long psr;
 		memset(new_stack, 0, STACKFRAME_SZ + TRACEREG_SZ);
-		p->thread.current_ds = KERNEL_DS;
 		ti->kpc = (((unsigned long) ret_from_kernel_thread) - 0x8);
 		childregs->u_regs[UREG_G1] = sp; /* function */
 		childregs->u_regs[UREG_G2] = arg;
@@ -311,7 +310,6 @@ int copy_thread(unsigned long clone_flags, unsigned long sp, unsigned long arg,
 	}
 	memcpy(new_stack, (char *)regs - STACKFRAME_SZ, STACKFRAME_SZ + TRACEREG_SZ);
 	childregs->u_regs[UREG_FP] = sp;
-	p->thread.current_ds = USER_DS;
 	ti->kpc = (((unsigned long) ret_from_fork) - 0x8);
 	ti->kpsr = current->thread.fork_kpsr | PSR_PIL;
 	ti->kwim = current->thread.fork_kwim;
diff --git a/arch/sparc/kernel/process_64.c b/arch/sparc/kernel/process_64.c
index f5b2cac8669f..9a2ceb080ac9 100644
--- a/arch/sparc/kernel/process_64.c
+++ b/arch/sparc/kernel/process_64.c
@@ -106,18 +106,13 @@ static void show_regwindow32(struct pt_regs *regs)
 {
 	struct reg_window32 __user *rw;
 	struct reg_window32 r_w;
-	mm_segment_t old_fs;
 	
 	__asm__ __volatile__ ("flushw");
 	rw = compat_ptr((unsigned int)regs->u_regs[14]);
-	old_fs = get_fs();
-	set_fs (USER_DS);
 	if (copy_from_user (&r_w, rw, sizeof(r_w))) {
-		set_fs (old_fs);
 		return;
 	}
 
-	set_fs (old_fs);			
 	printk("l0: %08x l1: %08x l2: %08x l3: %08x "
 	       "l4: %08x l5: %08x l6: %08x l7: %08x\n",
 	       r_w.locals[0], r_w.locals[1], r_w.locals[2], r_w.locals[3],
@@ -136,7 +131,6 @@ static void show_regwindow(struct pt_regs *regs)
 	struct reg_window __user *rw;
 	struct reg_window *rwk;
 	struct reg_window r_w;
-	mm_segment_t old_fs;
 
 	if ((regs->tstate & TSTATE_PRIV) || !(test_thread_flag(TIF_32BIT))) {
 		__asm__ __volatile__ ("flushw");
@@ -145,14 +139,10 @@ static void show_regwindow(struct pt_regs *regs)
 		rwk = (struct reg_window *)
 			(regs->u_regs[14] + STACK_BIAS);
 		if (!(regs->tstate & TSTATE_PRIV)) {
-			old_fs = get_fs();
-			set_fs (USER_DS);
 			if (copy_from_user (&r_w, rw, sizeof(r_w))) {
-				set_fs (old_fs);
 				return;
 			}
 			rwk = &r_w;
-			set_fs (old_fs);			
 		}
 	} else {
 		show_regwindow32(regs);
@@ -598,7 +588,6 @@ int copy_thread(unsigned long clone_flags, unsigned long sp, unsigned long arg,
 		memset(child_trap_frame, 0, child_stack_sz);
 		__thread_flag_byte_ptr(t)[TI_FLAG_BYTE_CWP] = 
 			(current_pt_regs()->tstate + 1) & TSTATE_CWP;
-		t->current_ds = ASI_P;
 		t->kregs->u_regs[UREG_G1] = sp; /* function */
 		t->kregs->u_regs[UREG_G2] = arg;
 		return 0;
@@ -613,7 +602,6 @@ int copy_thread(unsigned long clone_flags, unsigned long sp, unsigned long arg,
 	t->kregs->u_regs[UREG_FP] = sp;
 	__thread_flag_byte_ptr(t)[TI_FLAG_BYTE_CWP] = 
 		(regs->tstate + 1) & TSTATE_CWP;
-	t->current_ds = ASI_AIUS;
 	if (sp != regs->u_regs[UREG_FP]) {
 		unsigned long csp;
 
diff --git a/arch/sparc/kernel/signal_32.c b/arch/sparc/kernel/signal_32.c
index ffab16369bea..74f80443b195 100644
--- a/arch/sparc/kernel/signal_32.c
+++ b/arch/sparc/kernel/signal_32.c
@@ -65,7 +65,7 @@ struct rt_signal_frame {
  */
 static inline bool invalid_frame_pointer(void __user *fp, int fplen)
 {
-	if ((((unsigned long) fp) & 15) || !__access_ok((unsigned long)fp, fplen))
+	if ((((unsigned long) fp) & 15) || !access_ok(fp, fplen))
 		return true;
 
 	return false;
diff --git a/arch/sparc/kernel/sysfs.c b/arch/sparc/kernel/sysfs.c
index 6d60d416f0dd..f19487e4cc71 100644
--- a/arch/sparc/kernel/sysfs.c
+++ b/arch/sparc/kernel/sysfs.c
@@ -244,22 +244,10 @@ static void __init check_mmu_stats(void)
 		mmu_stats_supported = 1;
 }
 
-static void register_nodes(void)
-{
-#ifdef CONFIG_NUMA
-	int i;
-
-	for (i = 0; i < MAX_NUMNODES; i++)
-		register_one_node(i);
-#endif
-}
-
 static int __init topology_init(void)
 {
 	int cpu, ret;
 
-	register_nodes();
-
 	check_mmu_stats();
 
 	for_each_possible_cpu(cpu) {
diff --git a/arch/sparc/kernel/traps_64.c b/arch/sparc/kernel/traps_64.c
index 21077821f427..5b4de4a89dec 100644
--- a/arch/sparc/kernel/traps_64.c
+++ b/arch/sparc/kernel/traps_64.c
@@ -2857,8 +2857,6 @@ void __init trap_init(void)
 		     TI_PRE_COUNT != offsetof(struct thread_info,
 					      preempt_count) ||
 		     TI_NEW_CHILD != offsetof(struct thread_info, new_child) ||
-		     TI_CURRENT_DS != offsetof(struct thread_info,
-						current_ds) ||
 		     TI_KUNA_REGS != offsetof(struct thread_info,
 					      kern_una_regs) ||
 		     TI_KUNA_INSN != offsetof(struct thread_info,
diff --git a/arch/sparc/lib/NGmemcpy.S b/arch/sparc/lib/NGmemcpy.S
index 8e4d22a6ba0b..ee51c1230689 100644
--- a/arch/sparc/lib/NGmemcpy.S
+++ b/arch/sparc/lib/NGmemcpy.S
@@ -10,8 +10,7 @@
 #include <asm/thread_info.h>
 #define GLOBAL_SPARE	%g7
 #define RESTORE_ASI(TMP)	\
-	ldub	[%g6 + TI_CURRENT_DS], TMP;  \
-	wr	TMP, 0x0, %asi;
+	wr	%g0, ASI_AIUS, %asi
 #else
 #define GLOBAL_SPARE	%g5
 #define RESTORE_ASI(TMP)	\
diff --git a/arch/sparc/mm/hugetlbpage.c b/arch/sparc/mm/hugetlbpage.c
index 0f49fada2093..d8e0e3c7038d 100644
--- a/arch/sparc/mm/hugetlbpage.c
+++ b/arch/sparc/mm/hugetlbpage.c
@@ -181,6 +181,7 @@ pte_t arch_make_huge_pte(pte_t entry, unsigned int shift, vm_flags_t flags)
 {
 	pte_t pte;
 
+	entry = pte_mkhuge(entry);
 	pte = hugepage_shift_to_tte(entry, shift);
 
 #ifdef CONFIG_SPARC64
diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c
index 1b23639e2fcd..8b1911591581 100644
--- a/arch/sparc/mm/init_64.c
+++ b/arch/sparc/mm/init_64.c
@@ -709,9 +709,10 @@ static void __init inherit_prom_mappings(void)
 
 void prom_world(int enter)
 {
-	if (!enter)
-		set_fs(get_fs());
-
+	/*
+	 * No need to change the address space any more, just flush
+	 * the register windows
+	 */
 	__asm__ __volatile__("flushw");
 }
 
diff --git a/arch/um/include/asm/pgtable.h b/arch/um/include/asm/pgtable.h
index b9e20bbe2f75..167e236d9bb8 100644
--- a/arch/um/include/asm/pgtable.h
+++ b/arch/um/include/asm/pgtable.h
@@ -109,6 +109,7 @@ extern unsigned long end_iomem;
 #define p4d_newpage(x)  (p4d_val(x) & _PAGE_NEWPAGE)
 #define p4d_mkuptodate(x) (p4d_val(x) &= ~_PAGE_NEWPAGE)
 
+#define pmd_pfn(pmd) (pmd_val(pmd) >> PAGE_SHIFT)
 #define pmd_page(pmd) phys_to_page(pmd_val(pmd) & PAGE_MASK)
 
 #define pte_page(x) pfn_to_page(pte_pfn(x))
diff --git a/arch/um/include/asm/uaccess.h b/arch/um/include/asm/uaccess.h
index 17d18cfd82a5..7d9d60e41e4e 100644
--- a/arch/um/include/asm/uaccess.h
+++ b/arch/um/include/asm/uaccess.h
@@ -25,7 +25,7 @@
 extern unsigned long raw_copy_from_user(void *to, const void __user *from, unsigned long n);
 extern unsigned long raw_copy_to_user(void __user *to, const void *from, unsigned long n);
 extern unsigned long __clear_user(void __user *mem, unsigned long len);
-static inline int __access_ok(unsigned long addr, unsigned long size);
+static inline int __access_ok(const void __user *ptr, unsigned long size);
 
 /* Teach asm-generic/uaccess.h that we have C functions for these. */
 #define __access_ok __access_ok
@@ -36,16 +36,15 @@ static inline int __access_ok(unsigned long addr, unsigned long size);
 
 #include <asm-generic/uaccess.h>
 
-static inline int __access_ok(unsigned long addr, unsigned long size)
+static inline int __access_ok(const void __user *ptr, unsigned long size)
 {
+	unsigned long addr = (unsigned long)ptr;
 	return __addr_range_nowrap(addr, size) &&
 		(__under_task_size(addr, size) ||
 		 __access_ok_vsyscall(addr, size));
 }
 
 /* no pagefaults for kernel addresses in um */
-#define HAVE_GET_KERNEL_NOFAULT 1
-
 #define __get_kernel_nofault(dst, src, type, err_label)			\
 do {									\
 	*((type *)dst) = get_unaligned((type *)(src));			\
diff --git a/arch/um/os-Linux/execvp.c b/arch/um/os-Linux/execvp.c
index 84a0777c2a45..c09a5fd5e225 100644
--- a/arch/um/os-Linux/execvp.c
+++ b/arch/um/os-Linux/execvp.c
@@ -93,6 +93,7 @@ int execvp_noalloc(char *buf, const char *file, char *const argv[])
 					   up finding no executable we can use, we want to diagnose
 					   that we did find one but were denied access.  */
 					got_eacces = 1;
+					break;
 				case ENOENT:
 				case ESTALE:
 				case ENOTDIR:
diff --git a/arch/x86/Kbuild b/arch/x86/Kbuild
index f384cb1a4f7a..5a83da703e87 100644
--- a/arch/x86/Kbuild
+++ b/arch/x86/Kbuild
@@ -1,4 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_ARCH_HAS_CC_PLATFORM) += coco/
+
 obj-y += entry/
 
 obj-$(CONFIG_PERF_EVENTS) += events/
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 9f5bd41bf660..61e511c51890 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -69,6 +69,7 @@ config X86
 	select ARCH_ENABLE_THP_MIGRATION if X86_64 && TRANSPARENT_HUGEPAGE
 	select ARCH_HAS_ACPI_TABLE_UPGRADE	if ACPI
 	select ARCH_HAS_CACHE_LINE_SIZE
+	select ARCH_HAS_CURRENT_STACK_POINTER
 	select ARCH_HAS_DEBUG_VIRTUAL
 	select ARCH_HAS_DEBUG_VM_PGTABLE	if !X86_PAE
 	select ARCH_HAS_DEVMEM_IS_ALLOWED
@@ -118,8 +119,10 @@ config X86
 	select ARCH_WANT_DEFAULT_BPF_JIT	if X86_64
 	select ARCH_WANTS_DYNAMIC_TASK_STRUCT
 	select ARCH_WANTS_NO_INSTR
+	select ARCH_WANT_GENERAL_HUGETLB
 	select ARCH_WANT_HUGE_PMD_SHARE
 	select ARCH_WANT_LD_ORPHAN_WARN
+	select ARCH_WANTS_RT_DELAYED_SIGNALS
 	select ARCH_WANTS_THP_SWAP		if X86_64
 	select ARCH_HAS_PARANOID_L1D_FLUSH
 	select BUILDTIME_TABLE_SORT
@@ -246,7 +249,7 @@ config X86
 	select HAVE_STACK_VALIDATION		if X86_64
 	select HAVE_STATIC_CALL
 	select HAVE_STATIC_CALL_INLINE		if HAVE_STACK_VALIDATION
-	select HAVE_PREEMPT_DYNAMIC
+	select HAVE_PREEMPT_DYNAMIC_CALL
 	select HAVE_RSEQ
 	select HAVE_SYSCALL_TRACEPOINTS
 	select HAVE_UNSTABLE_SCHED_CLOCK
@@ -347,9 +350,6 @@ config ARCH_NR_GPIO
 config ARCH_SUSPEND_POSSIBLE
 	def_bool y
 
-config ARCH_WANT_GENERAL_HUGETLB
-	def_bool y
-
 config AUDIT_ARCH
 	def_bool y if X86_64
 
@@ -1275,23 +1275,6 @@ config TOSHIBA
 	  Say Y if you intend to run this kernel on a Toshiba portable.
 	  Say N otherwise.
 
-config I8K
-	tristate "Dell i8k legacy laptop support"
-	depends on HWMON
-	depends on PROC_FS
-	select SENSORS_DELL_SMM
-	help
-	  This option enables legacy /proc/i8k userspace interface in hwmon
-	  dell-smm-hwmon driver. Character file /proc/i8k reports bios version,
-	  temperature and allows controlling fan speeds of Dell laptops via
-	  System Management Mode. For old Dell laptops (like Dell Inspiron 8000)
-	  it reports also power and hotkey status. For fan speed control is
-	  needed userspace package i8kutils.
-
-	  Say Y if you intend to run this kernel on old Dell laptops or want to
-	  use userspace package i8kutils.
-	  Say N otherwise.
-
 config X86_REBOOTFIXUPS
 	bool "Enable X86 board specific fixups for reboot"
 	depends on X86_32
@@ -1638,7 +1621,7 @@ config ARCH_SPARSEMEM_DEFAULT
 
 config ARCH_SELECT_MEMORY_MODEL
 	def_bool y
-	depends on ARCH_SPARSEMEM_ENABLE
+	depends on ARCH_SPARSEMEM_ENABLE && ARCH_FLATMEM_ENABLE
 
 config ARCH_MEMORY_PROBE
 	bool "Enable sysfs memory/probe interface"
diff --git a/arch/x86/boot/compressed/head_32.S b/arch/x86/boot/compressed/head_32.S
index 659fad53ca82..3b354eb9516d 100644
--- a/arch/x86/boot/compressed/head_32.S
+++ b/arch/x86/boot/compressed/head_32.S
@@ -152,14 +152,13 @@ SYM_FUNC_END(startup_32)
 
 #ifdef CONFIG_EFI_STUB
 SYM_FUNC_START(efi32_stub_entry)
-SYM_FUNC_START_ALIAS(efi_stub_entry)
 	add	$0x4, %esp
 	movl	8(%esp), %esi	/* save boot_params pointer */
 	call	efi_main
 	/* efi_main returns the possibly relocated address of startup_32 */
 	jmp	*%eax
 SYM_FUNC_END(efi32_stub_entry)
-SYM_FUNC_END_ALIAS(efi_stub_entry)
+SYM_FUNC_ALIAS(efi_stub_entry, efi32_stub_entry)
 #endif
 
 	.text
diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index fd9441f40457..dea95301196b 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -535,7 +535,6 @@ SYM_CODE_END(startup_64)
 #ifdef CONFIG_EFI_STUB
 	.org 0x390
 SYM_FUNC_START(efi64_stub_entry)
-SYM_FUNC_START_ALIAS(efi_stub_entry)
 	and	$~0xf, %rsp			/* realign the stack */
 	movq	%rdx, %rbx			/* save boot_params pointer */
 	call	efi_main
@@ -543,7 +542,7 @@ SYM_FUNC_START_ALIAS(efi_stub_entry)
 	leaq	rva(startup_64)(%rax), %rax
 	jmp	*%rax
 SYM_FUNC_END(efi64_stub_entry)
-SYM_FUNC_END_ALIAS(efi_stub_entry)
+SYM_FUNC_ALIAS(efi_stub_entry, efi64_stub_entry)
 #endif
 
 	.text
diff --git a/arch/x86/coco/Makefile b/arch/x86/coco/Makefile
new file mode 100644
index 000000000000..c1ead00017a7
--- /dev/null
+++ b/arch/x86/coco/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0
+CFLAGS_REMOVE_core.o	= -pg
+KASAN_SANITIZE_core.o	:= n
+CFLAGS_core.o		+= -fno-stack-protector
+
+obj-y += core.o
diff --git a/arch/x86/kernel/cc_platform.c b/arch/x86/coco/core.c
index 6a6ffcd978f6..fc1365dd927e 100644
--- a/arch/x86/kernel/cc_platform.c
+++ b/arch/x86/coco/core.c
@@ -9,18 +9,16 @@
 
 #include <linux/export.h>
 #include <linux/cc_platform.h>
-#include <linux/mem_encrypt.h>
 
-#include <asm/mshyperv.h>
+#include <asm/coco.h>
 #include <asm/processor.h>
 
-static bool __maybe_unused intel_cc_platform_has(enum cc_attr attr)
+static enum cc_vendor vendor __ro_after_init;
+static u64 cc_mask __ro_after_init;
+
+static bool intel_cc_platform_has(enum cc_attr attr)
 {
-#ifdef CONFIG_INTEL_TDX_GUEST
-	return false;
-#else
 	return false;
-#endif
 }
 
 /*
@@ -74,12 +72,46 @@ static bool hyperv_cc_platform_has(enum cc_attr attr)
 
 bool cc_platform_has(enum cc_attr attr)
 {
-	if (sme_me_mask)
+	switch (vendor) {
+	case CC_VENDOR_AMD:
 		return amd_cc_platform_has(attr);
-
-	if (hv_is_isolation_supported())
+	case CC_VENDOR_INTEL:
+		return intel_cc_platform_has(attr);
+	case CC_VENDOR_HYPERV:
 		return hyperv_cc_platform_has(attr);
-
-	return false;
+	default:
+		return false;
+	}
 }
 EXPORT_SYMBOL_GPL(cc_platform_has);
+
+u64 cc_mkenc(u64 val)
+{
+	switch (vendor) {
+	case CC_VENDOR_AMD:
+		return val | cc_mask;
+	default:
+		return val;
+	}
+}
+
+u64 cc_mkdec(u64 val)
+{
+	switch (vendor) {
+	case CC_VENDOR_AMD:
+		return val & ~cc_mask;
+	default:
+		return val;
+	}
+}
+EXPORT_SYMBOL_GPL(cc_mkdec);
+
+__init void cc_set_vendor(enum cc_vendor v)
+{
+	vendor = v;
+}
+
+__init void cc_set_mask(u64 mask)
+{
+	cc_mask = mask;
+}
diff --git a/arch/x86/crypto/Makefile b/arch/x86/crypto/Makefile
index c3af959648e6..2831685adf6f 100644
--- a/arch/x86/crypto/Makefile
+++ b/arch/x86/crypto/Makefile
@@ -90,6 +90,9 @@ nhpoly1305-avx2-y := nh-avx2-x86_64.o nhpoly1305-avx2-glue.o
 
 obj-$(CONFIG_CRYPTO_CURVE25519_X86) += curve25519-x86_64.o
 
+obj-$(CONFIG_CRYPTO_SM3_AVX_X86_64) += sm3-avx-x86_64.o
+sm3-avx-x86_64-y := sm3-avx-asm_64.o sm3_avx_glue.o
+
 obj-$(CONFIG_CRYPTO_SM4_AESNI_AVX_X86_64) += sm4-aesni-avx-x86_64.o
 sm4-aesni-avx-x86_64-y := sm4-aesni-avx-asm_64.o sm4_aesni_avx_glue.o
 
diff --git a/arch/x86/crypto/aes_ctrby8_avx-x86_64.S b/arch/x86/crypto/aes_ctrby8_avx-x86_64.S
index c799838242a6..43852ba6e19c 100644
--- a/arch/x86/crypto/aes_ctrby8_avx-x86_64.S
+++ b/arch/x86/crypto/aes_ctrby8_avx-x86_64.S
@@ -1,65 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-3-Clause */
 /*
- *	Implement AES CTR mode by8 optimization with AVX instructions. (x86_64)
- *
- * This is AES128/192/256 CTR mode optimization implementation. It requires
- * the support of Intel(R) AESNI and AVX instructions.
- *
- * This work was inspired by the AES CTR mode optimization published
- * in Intel Optimized IPSEC Cryptograhpic library.
- * Additional information on it can be found at:
- *    http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=22972
- *
- * This file is provided under a dual BSD/GPLv2 license.  When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
+ * AES CTR mode by8 optimization with AVX instructions. (x86_64)
  *
  * Copyright(c) 2014 Intel Corporation.
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
  * Contact Information:
  * James Guilford <james.guilford@intel.com>
  * Sean Gulley <sean.m.gulley@intel.com>
  * Chandramouli Narayanan <mouli@linux.intel.com>
+ */
+/*
+ * This is AES128/192/256 CTR mode optimization implementation. It requires
+ * the support of Intel(R) AESNI and AVX instructions.
  *
- * BSD LICENSE
- *
- * Copyright(c) 2014 Intel Corporation.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
+ * This work was inspired by the AES CTR mode optimization published
+ * in Intel Optimized IPSEC Cryptographic library.
+ * Additional information on it can be found at:
+ *    https://github.com/intel/intel-ipsec-mb
  */
 
 #include <linux/linkage.h>
diff --git a/arch/x86/crypto/aesni-intel_asm.S b/arch/x86/crypto/aesni-intel_asm.S
index 363699dd7220..837c1e0aa021 100644
--- a/arch/x86/crypto/aesni-intel_asm.S
+++ b/arch/x86/crypto/aesni-intel_asm.S
@@ -1751,8 +1751,6 @@ SYM_FUNC_END(aesni_gcm_finalize)
 
 #endif
 
-
-SYM_FUNC_START_LOCAL_ALIAS(_key_expansion_128)
 SYM_FUNC_START_LOCAL(_key_expansion_256a)
 	pshufd $0b11111111, %xmm1, %xmm1
 	shufps $0b00010000, %xmm0, %xmm4
@@ -1764,7 +1762,7 @@ SYM_FUNC_START_LOCAL(_key_expansion_256a)
 	add $0x10, TKEYP
 	RET
 SYM_FUNC_END(_key_expansion_256a)
-SYM_FUNC_END_ALIAS(_key_expansion_128)
+SYM_FUNC_ALIAS_LOCAL(_key_expansion_128, _key_expansion_256a)
 
 SYM_FUNC_START_LOCAL(_key_expansion_192a)
 	pshufd $0b01010101, %xmm1, %xmm1
diff --git a/arch/x86/crypto/blake2s-shash.c b/arch/x86/crypto/blake2s-shash.c
index f9e2fecdb761..59ae28abe35c 100644
--- a/arch/x86/crypto/blake2s-shash.c
+++ b/arch/x86/crypto/blake2s-shash.c
@@ -18,12 +18,12 @@
 static int crypto_blake2s_update_x86(struct shash_desc *desc,
 				     const u8 *in, unsigned int inlen)
 {
-	return crypto_blake2s_update(desc, in, inlen, blake2s_compress);
+	return crypto_blake2s_update(desc, in, inlen, false);
 }
 
 static int crypto_blake2s_final_x86(struct shash_desc *desc, u8 *out)
 {
-	return crypto_blake2s_final(desc, out, blake2s_compress);
+	return crypto_blake2s_final(desc, out, false);
 }
 
 #define BLAKE2S_ALG(name, driver_name, digest_size)			\
diff --git a/arch/x86/crypto/blowfish_glue.c b/arch/x86/crypto/blowfish_glue.c
index a880e0b1c255..fda6066437aa 100644
--- a/arch/x86/crypto/blowfish_glue.c
+++ b/arch/x86/crypto/blowfish_glue.c
@@ -32,24 +32,12 @@ static inline void blowfish_enc_blk(struct bf_ctx *ctx, u8 *dst, const u8 *src)
 	__blowfish_enc_blk(ctx, dst, src, false);
 }
 
-static inline void blowfish_enc_blk_xor(struct bf_ctx *ctx, u8 *dst,
-					const u8 *src)
-{
-	__blowfish_enc_blk(ctx, dst, src, true);
-}
-
 static inline void blowfish_enc_blk_4way(struct bf_ctx *ctx, u8 *dst,
 					 const u8 *src)
 {
 	__blowfish_enc_blk_4way(ctx, dst, src, false);
 }
 
-static inline void blowfish_enc_blk_xor_4way(struct bf_ctx *ctx, u8 *dst,
-				      const u8 *src)
-{
-	__blowfish_enc_blk_4way(ctx, dst, src, true);
-}
-
 static void blowfish_encrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src)
 {
 	blowfish_enc_blk(crypto_tfm_ctx(tfm), dst, src);
diff --git a/arch/x86/crypto/des3_ede_glue.c b/arch/x86/crypto/des3_ede_glue.c
index 787c234d2469..abb8b1fe123b 100644
--- a/arch/x86/crypto/des3_ede_glue.c
+++ b/arch/x86/crypto/des3_ede_glue.c
@@ -45,14 +45,6 @@ static inline void des3_ede_dec_blk(struct des3_ede_x86_ctx *ctx, u8 *dst,
 	des3_ede_x86_64_crypt_blk(dec_ctx, dst, src);
 }
 
-static inline void des3_ede_enc_blk_3way(struct des3_ede_x86_ctx *ctx, u8 *dst,
-					 const u8 *src)
-{
-	u32 *enc_ctx = ctx->enc.expkey;
-
-	des3_ede_x86_64_crypt_blk_3way(enc_ctx, dst, src);
-}
-
 static inline void des3_ede_dec_blk_3way(struct des3_ede_x86_ctx *ctx, u8 *dst,
 					 const u8 *src)
 {
diff --git a/arch/x86/crypto/sm3-avx-asm_64.S b/arch/x86/crypto/sm3-avx-asm_64.S
new file mode 100644
index 000000000000..71e6aae23e17
--- /dev/null
+++ b/arch/x86/crypto/sm3-avx-asm_64.S
@@ -0,0 +1,517 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * SM3 AVX accelerated transform.
+ * specified in: https://datatracker.ietf.org/doc/html/draft-sca-cfrg-sm3-02
+ *
+ * Copyright (C) 2021 Jussi Kivilinna <jussi.kivilinna@iki.fi>
+ * Copyright (C) 2021 Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
+ */
+
+/* Based on SM3 AES/BMI2 accelerated work by libgcrypt at:
+ *  https://gnupg.org/software/libgcrypt/index.html
+ */
+
+#include <linux/linkage.h>
+#include <asm/frame.h>
+
+/* Context structure */
+
+#define state_h0 0
+#define state_h1 4
+#define state_h2 8
+#define state_h3 12
+#define state_h4 16
+#define state_h5 20
+#define state_h6 24
+#define state_h7 28
+
+/* Constants */
+
+/* Round constant macros */
+
+#define K0   2043430169  /* 0x79cc4519 */
+#define K1   -208106958  /* 0xf3988a32 */
+#define K2   -416213915  /* 0xe7311465 */
+#define K3   -832427829  /* 0xce6228cb */
+#define K4  -1664855657  /* 0x9cc45197 */
+#define K5    965255983  /* 0x3988a32f */
+#define K6   1930511966  /* 0x7311465e */
+#define K7   -433943364  /* 0xe6228cbc */
+#define K8   -867886727  /* 0xcc451979 */
+#define K9  -1735773453  /* 0x988a32f3 */
+#define K10   823420391  /* 0x311465e7 */
+#define K11  1646840782  /* 0x6228cbce */
+#define K12 -1001285732  /* 0xc451979c */
+#define K13 -2002571463  /* 0x88a32f39 */
+#define K14   289824371  /* 0x11465e73 */
+#define K15   579648742  /* 0x228cbce6 */
+#define K16 -1651869049  /* 0x9d8a7a87 */
+#define K17   991229199  /* 0x3b14f50f */
+#define K18  1982458398  /* 0x7629ea1e */
+#define K19  -330050500  /* 0xec53d43c */
+#define K20  -660100999  /* 0xd8a7a879 */
+#define K21 -1320201997  /* 0xb14f50f3 */
+#define K22  1654563303  /* 0x629ea1e7 */
+#define K23  -985840690  /* 0xc53d43ce */
+#define K24 -1971681379  /* 0x8a7a879d */
+#define K25   351604539  /* 0x14f50f3b */
+#define K26   703209078  /* 0x29ea1e76 */
+#define K27  1406418156  /* 0x53d43cec */
+#define K28 -1482130984  /* 0xa7a879d8 */
+#define K29  1330705329  /* 0x4f50f3b1 */
+#define K30 -1633556638  /* 0x9ea1e762 */
+#define K31  1027854021  /* 0x3d43cec5 */
+#define K32  2055708042  /* 0x7a879d8a */
+#define K33  -183551212  /* 0xf50f3b14 */
+#define K34  -367102423  /* 0xea1e7629 */
+#define K35  -734204845  /* 0xd43cec53 */
+#define K36 -1468409689  /* 0xa879d8a7 */
+#define K37  1358147919  /* 0x50f3b14f */
+#define K38 -1578671458  /* 0xa1e7629e */
+#define K39  1137624381  /* 0x43cec53d */
+#define K40 -2019718534  /* 0x879d8a7a */
+#define K41   255530229  /* 0x0f3b14f5 */
+#define K42   511060458  /* 0x1e7629ea */
+#define K43  1022120916  /* 0x3cec53d4 */
+#define K44  2044241832  /* 0x79d8a7a8 */
+#define K45  -206483632  /* 0xf3b14f50 */
+#define K46  -412967263  /* 0xe7629ea1 */
+#define K47  -825934525  /* 0xcec53d43 */
+#define K48 -1651869049  /* 0x9d8a7a87 */
+#define K49   991229199  /* 0x3b14f50f */
+#define K50  1982458398  /* 0x7629ea1e */
+#define K51  -330050500  /* 0xec53d43c */
+#define K52  -660100999  /* 0xd8a7a879 */
+#define K53 -1320201997  /* 0xb14f50f3 */
+#define K54  1654563303  /* 0x629ea1e7 */
+#define K55  -985840690  /* 0xc53d43ce */
+#define K56 -1971681379  /* 0x8a7a879d */
+#define K57   351604539  /* 0x14f50f3b */
+#define K58   703209078  /* 0x29ea1e76 */
+#define K59  1406418156  /* 0x53d43cec */
+#define K60 -1482130984  /* 0xa7a879d8 */
+#define K61  1330705329  /* 0x4f50f3b1 */
+#define K62 -1633556638  /* 0x9ea1e762 */
+#define K63  1027854021  /* 0x3d43cec5 */
+
+/* Register macros */
+
+#define RSTATE %rdi
+#define RDATA  %rsi
+#define RNBLKS %rdx
+
+#define t0 %eax
+#define t1 %ebx
+#define t2 %ecx
+
+#define a %r8d
+#define b %r9d
+#define c %r10d
+#define d %r11d
+#define e %r12d
+#define f %r13d
+#define g %r14d
+#define h %r15d
+
+#define W0 %xmm0
+#define W1 %xmm1
+#define W2 %xmm2
+#define W3 %xmm3
+#define W4 %xmm4
+#define W5 %xmm5
+
+#define XTMP0 %xmm6
+#define XTMP1 %xmm7
+#define XTMP2 %xmm8
+#define XTMP3 %xmm9
+#define XTMP4 %xmm10
+#define XTMP5 %xmm11
+#define XTMP6 %xmm12
+
+#define BSWAP_REG %xmm15
+
+/* Stack structure */
+
+#define STACK_W_SIZE        (32 * 2 * 3)
+#define STACK_REG_SAVE_SIZE (64)
+
+#define STACK_W             (0)
+#define STACK_REG_SAVE      (STACK_W + STACK_W_SIZE)
+#define STACK_SIZE          (STACK_REG_SAVE + STACK_REG_SAVE_SIZE)
+
+/* Instruction helpers. */
+
+#define roll2(v, reg)		\
+	roll $(v), reg;
+
+#define roll3mov(v, src, dst)	\
+	movl src, dst;		\
+	roll $(v), dst;
+
+#define roll3(v, src, dst)	\
+	rorxl $(32-(v)), src, dst;
+
+#define addl2(a, out)		\
+	leal (a, out), out;
+
+/* Round function macros. */
+
+#define GG1(x, y, z, o, t)	\
+	movl x, o;		\
+	xorl y, o;		\
+	xorl z, o;
+
+#define FF1(x, y, z, o, t) GG1(x, y, z, o, t)
+
+#define GG2(x, y, z, o, t)	\
+	andnl z, x, o;		\
+	movl y, t;		\
+	andl x, t;		\
+	addl2(t, o);
+
+#define FF2(x, y, z, o, t)	\
+	movl y, o;		\
+	xorl x, o;		\
+	movl y, t;		\
+	andl x, t;		\
+	andl z, o;		\
+	xorl t, o;
+
+#define R(i, a, b, c, d, e, f, g, h, round, widx, wtype)		\
+	/* rol(a, 12) => t0 */						\
+	roll3mov(12, a, t0); /* rorxl here would reduce perf by 6% on zen3 */ \
+	/* rol (t0 + e + t), 7) => t1 */				\
+	leal K##round(t0, e, 1), t1;					\
+	roll2(7, t1);							\
+	/* h + w1 => h */						\
+	addl wtype##_W1_ADDR(round, widx), h;				\
+	/* h + t1 => h */						\
+	addl2(t1, h);							\
+	/* t1 ^ t0 => t0 */						\
+	xorl t1, t0;							\
+	/* w1w2 + d => d */						\
+	addl wtype##_W1W2_ADDR(round, widx), d;				\
+	/* FF##i(a,b,c) => t1 */					\
+	FF##i(a, b, c, t1, t2);						\
+	/* d + t1 => d */						\
+	addl2(t1, d);							\
+	/* GG#i(e,f,g) => t2 */						\
+	GG##i(e, f, g, t2, t1);						\
+	/* h + t2 => h */						\
+	addl2(t2, h);							\
+	/* rol (f, 19) => f */						\
+	roll2(19, f);							\
+	/* d + t0 => d */						\
+	addl2(t0, d);							\
+	/* rol (b, 9) => b */						\
+	roll2(9, b);							\
+	/* P0(h) => h */						\
+	roll3(9, h, t2);						\
+	roll3(17, h, t1);						\
+	xorl t2, h;							\
+	xorl t1, h;
+
+#define R1(a, b, c, d, e, f, g, h, round, widx, wtype) \
+	R(1, a, b, c, d, e, f, g, h, round, widx, wtype)
+
+#define R2(a, b, c, d, e, f, g, h, round, widx, wtype) \
+	R(2, a, b, c, d, e, f, g, h, round, widx, wtype)
+
+/* Input expansion macros. */
+
+/* Byte-swapped input address. */
+#define IW_W_ADDR(round, widx, offs) \
+	(STACK_W + ((round) / 4) * 64 + (offs) + ((widx) * 4))(%rsp)
+
+/* Expanded input address. */
+#define XW_W_ADDR(round, widx, offs) \
+	(STACK_W + ((((round) / 3) - 4) % 2) * 64 + (offs) + ((widx) * 4))(%rsp)
+
+/* Rounds 1-12, byte-swapped input block addresses. */
+#define IW_W1_ADDR(round, widx)   IW_W_ADDR(round, widx, 0)
+#define IW_W1W2_ADDR(round, widx) IW_W_ADDR(round, widx, 32)
+
+/* Rounds 1-12, expanded input block addresses. */
+#define XW_W1_ADDR(round, widx)   XW_W_ADDR(round, widx, 0)
+#define XW_W1W2_ADDR(round, widx) XW_W_ADDR(round, widx, 32)
+
+/* Input block loading. */
+#define LOAD_W_XMM_1()							\
+	vmovdqu 0*16(RDATA), XTMP0; /* XTMP0: w3, w2, w1, w0 */		\
+	vmovdqu 1*16(RDATA), XTMP1; /* XTMP1: w7, w6, w5, w4 */		\
+	vmovdqu 2*16(RDATA), XTMP2; /* XTMP2: w11, w10, w9, w8 */	\
+	vmovdqu 3*16(RDATA), XTMP3; /* XTMP3: w15, w14, w13, w12 */	\
+	vpshufb BSWAP_REG, XTMP0, XTMP0;				\
+	vpshufb BSWAP_REG, XTMP1, XTMP1;				\
+	vpshufb BSWAP_REG, XTMP2, XTMP2;				\
+	vpshufb BSWAP_REG, XTMP3, XTMP3;				\
+	vpxor XTMP0, XTMP1, XTMP4;					\
+	vpxor XTMP1, XTMP2, XTMP5;					\
+	vpxor XTMP2, XTMP3, XTMP6;					\
+	leaq 64(RDATA), RDATA;						\
+	vmovdqa XTMP0, IW_W1_ADDR(0, 0);				\
+	vmovdqa XTMP4, IW_W1W2_ADDR(0, 0);				\
+	vmovdqa XTMP1, IW_W1_ADDR(4, 0);				\
+	vmovdqa XTMP5, IW_W1W2_ADDR(4, 0);
+
+#define LOAD_W_XMM_2()				\
+	vmovdqa XTMP2, IW_W1_ADDR(8, 0);	\
+	vmovdqa XTMP6, IW_W1W2_ADDR(8, 0);
+
+#define LOAD_W_XMM_3()							\
+	vpshufd $0b00000000, XTMP0, W0; /* W0: xx, w0, xx, xx */	\
+	vpshufd $0b11111001, XTMP0, W1; /* W1: xx, w3, w2, w1 */	\
+	vmovdqa XTMP1, W2;              /* W2: xx, w6, w5, w4 */	\
+	vpalignr $12, XTMP1, XTMP2, W3; /* W3: xx, w9, w8, w7 */	\
+	vpalignr $8, XTMP2, XTMP3, W4;  /* W4: xx, w12, w11, w10 */	\
+	vpshufd $0b11111001, XTMP3, W5; /* W5: xx, w15, w14, w13 */
+
+/* Message scheduling. Note: 3 words per XMM register. */
+#define SCHED_W_0(round, w0, w1, w2, w3, w4, w5)			\
+	/* Load (w[i - 16]) => XTMP0 */					\
+	vpshufd $0b10111111, w0, XTMP0;					\
+	vpalignr $12, XTMP0, w1, XTMP0; /* XTMP0: xx, w2, w1, w0 */	\
+	/* Load (w[i - 13]) => XTMP1 */					\
+	vpshufd $0b10111111, w1, XTMP1;					\
+	vpalignr $12, XTMP1, w2, XTMP1;					\
+	/* w[i - 9] == w3 */						\
+	/* XMM3 ^ XTMP0 => XTMP0 */					\
+	vpxor w3, XTMP0, XTMP0;
+
+#define SCHED_W_1(round, w0, w1, w2, w3, w4, w5)	\
+	/* w[i - 3] == w5 */				\
+	/* rol(XMM5, 15) ^ XTMP0 => XTMP0 */		\
+	vpslld $15, w5, XTMP2;				\
+	vpsrld $(32-15), w5, XTMP3;			\
+	vpxor XTMP2, XTMP3, XTMP3;			\
+	vpxor XTMP3, XTMP0, XTMP0;			\
+	/* rol(XTMP1, 7) => XTMP1 */			\
+	vpslld $7, XTMP1, XTMP5;			\
+	vpsrld $(32-7), XTMP1, XTMP1;			\
+	vpxor XTMP5, XTMP1, XTMP1;			\
+	/* XMM4 ^ XTMP1 => XTMP1 */			\
+	vpxor w4, XTMP1, XTMP1;				\
+	/* w[i - 6] == XMM4 */				\
+	/* P1(XTMP0) ^ XTMP1 => XMM0 */			\
+	vpslld $15, XTMP0, XTMP5;			\
+	vpsrld $(32-15), XTMP0, XTMP6;			\
+	vpslld $23, XTMP0, XTMP2;			\
+	vpsrld $(32-23), XTMP0, XTMP3;			\
+	vpxor XTMP0, XTMP1, XTMP1;			\
+	vpxor XTMP6, XTMP5, XTMP5;			\
+	vpxor XTMP3, XTMP2, XTMP2;			\
+	vpxor XTMP2, XTMP5, XTMP5;			\
+	vpxor XTMP5, XTMP1, w0;
+
+#define SCHED_W_2(round, w0, w1, w2, w3, w4, w5)	\
+	/* W1 in XMM12 */				\
+	vpshufd $0b10111111, w4, XTMP4;			\
+	vpalignr $12, XTMP4, w5, XTMP4;			\
+	vmovdqa XTMP4, XW_W1_ADDR((round), 0);		\
+	/* W1 ^ W2 => XTMP1 */				\
+	vpxor w0, XTMP4, XTMP1;				\
+	vmovdqa XTMP1, XW_W1W2_ADDR((round), 0);
+
+
+.section	.rodata.cst16, "aM", @progbits, 16
+.align 16
+
+.Lbe32mask:
+	.long 0x00010203, 0x04050607, 0x08090a0b, 0x0c0d0e0f
+
+.text
+
+/*
+ * Transform nblocks*64 bytes (nblocks*16 32-bit words) at DATA.
+ *
+ * void sm3_transform_avx(struct sm3_state *state,
+ *                        const u8 *data, int nblocks);
+ */
+.align 16
+SYM_FUNC_START(sm3_transform_avx)
+	/* input:
+	 *	%rdi: ctx, CTX
+	 *	%rsi: data (64*nblks bytes)
+	 *	%rdx: nblocks
+	 */
+	vzeroupper;
+
+	pushq %rbp;
+	movq %rsp, %rbp;
+
+	movq %rdx, RNBLKS;
+
+	subq $STACK_SIZE, %rsp;
+	andq $(~63), %rsp;
+
+	movq %rbx, (STACK_REG_SAVE + 0 * 8)(%rsp);
+	movq %r15, (STACK_REG_SAVE + 1 * 8)(%rsp);
+	movq %r14, (STACK_REG_SAVE + 2 * 8)(%rsp);
+	movq %r13, (STACK_REG_SAVE + 3 * 8)(%rsp);
+	movq %r12, (STACK_REG_SAVE + 4 * 8)(%rsp);
+
+	vmovdqa .Lbe32mask (%rip), BSWAP_REG;
+
+	/* Get the values of the chaining variables. */
+	movl state_h0(RSTATE), a;
+	movl state_h1(RSTATE), b;
+	movl state_h2(RSTATE), c;
+	movl state_h3(RSTATE), d;
+	movl state_h4(RSTATE), e;
+	movl state_h5(RSTATE), f;
+	movl state_h6(RSTATE), g;
+	movl state_h7(RSTATE), h;
+
+.align 16
+.Loop:
+	/* Load data part1. */
+	LOAD_W_XMM_1();
+
+	leaq -1(RNBLKS), RNBLKS;
+
+	/* Transform 0-3 + Load data part2. */
+	R1(a, b, c, d, e, f, g, h, 0, 0, IW); LOAD_W_XMM_2();
+	R1(d, a, b, c, h, e, f, g, 1, 1, IW);
+	R1(c, d, a, b, g, h, e, f, 2, 2, IW);
+	R1(b, c, d, a, f, g, h, e, 3, 3, IW); LOAD_W_XMM_3();
+
+	/* Transform 4-7 + Precalc 12-14. */
+	R1(a, b, c, d, e, f, g, h, 4, 0, IW);
+	R1(d, a, b, c, h, e, f, g, 5, 1, IW);
+	R1(c, d, a, b, g, h, e, f, 6, 2, IW); SCHED_W_0(12, W0, W1, W2, W3, W4, W5);
+	R1(b, c, d, a, f, g, h, e, 7, 3, IW); SCHED_W_1(12, W0, W1, W2, W3, W4, W5);
+
+	/* Transform 8-11 + Precalc 12-17. */
+	R1(a, b, c, d, e, f, g, h, 8, 0, IW); SCHED_W_2(12, W0, W1, W2, W3, W4, W5);
+	R1(d, a, b, c, h, e, f, g, 9, 1, IW); SCHED_W_0(15, W1, W2, W3, W4, W5, W0);
+	R1(c, d, a, b, g, h, e, f, 10, 2, IW); SCHED_W_1(15, W1, W2, W3, W4, W5, W0);
+	R1(b, c, d, a, f, g, h, e, 11, 3, IW); SCHED_W_2(15, W1, W2, W3, W4, W5, W0);
+
+	/* Transform 12-14 + Precalc 18-20 */
+	R1(a, b, c, d, e, f, g, h, 12, 0, XW); SCHED_W_0(18, W2, W3, W4, W5, W0, W1);
+	R1(d, a, b, c, h, e, f, g, 13, 1, XW); SCHED_W_1(18, W2, W3, W4, W5, W0, W1);
+	R1(c, d, a, b, g, h, e, f, 14, 2, XW); SCHED_W_2(18, W2, W3, W4, W5, W0, W1);
+
+	/* Transform 15-17 + Precalc 21-23 */
+	R1(b, c, d, a, f, g, h, e, 15, 0, XW); SCHED_W_0(21, W3, W4, W5, W0, W1, W2);
+	R2(a, b, c, d, e, f, g, h, 16, 1, XW); SCHED_W_1(21, W3, W4, W5, W0, W1, W2);
+	R2(d, a, b, c, h, e, f, g, 17, 2, XW); SCHED_W_2(21, W3, W4, W5, W0, W1, W2);
+
+	/* Transform 18-20 + Precalc 24-26 */
+	R2(c, d, a, b, g, h, e, f, 18, 0, XW); SCHED_W_0(24, W4, W5, W0, W1, W2, W3);
+	R2(b, c, d, a, f, g, h, e, 19, 1, XW); SCHED_W_1(24, W4, W5, W0, W1, W2, W3);
+	R2(a, b, c, d, e, f, g, h, 20, 2, XW); SCHED_W_2(24, W4, W5, W0, W1, W2, W3);
+
+	/* Transform 21-23 + Precalc 27-29 */
+	R2(d, a, b, c, h, e, f, g, 21, 0, XW); SCHED_W_0(27, W5, W0, W1, W2, W3, W4);
+	R2(c, d, a, b, g, h, e, f, 22, 1, XW); SCHED_W_1(27, W5, W0, W1, W2, W3, W4);
+	R2(b, c, d, a, f, g, h, e, 23, 2, XW); SCHED_W_2(27, W5, W0, W1, W2, W3, W4);
+
+	/* Transform 24-26 + Precalc 30-32 */
+	R2(a, b, c, d, e, f, g, h, 24, 0, XW); SCHED_W_0(30, W0, W1, W2, W3, W4, W5);
+	R2(d, a, b, c, h, e, f, g, 25, 1, XW); SCHED_W_1(30, W0, W1, W2, W3, W4, W5);
+	R2(c, d, a, b, g, h, e, f, 26, 2, XW); SCHED_W_2(30, W0, W1, W2, W3, W4, W5);
+
+	/* Transform 27-29 + Precalc 33-35 */
+	R2(b, c, d, a, f, g, h, e, 27, 0, XW); SCHED_W_0(33, W1, W2, W3, W4, W5, W0);
+	R2(a, b, c, d, e, f, g, h, 28, 1, XW); SCHED_W_1(33, W1, W2, W3, W4, W5, W0);
+	R2(d, a, b, c, h, e, f, g, 29, 2, XW); SCHED_W_2(33, W1, W2, W3, W4, W5, W0);
+
+	/* Transform 30-32 + Precalc 36-38 */
+	R2(c, d, a, b, g, h, e, f, 30, 0, XW); SCHED_W_0(36, W2, W3, W4, W5, W0, W1);
+	R2(b, c, d, a, f, g, h, e, 31, 1, XW); SCHED_W_1(36, W2, W3, W4, W5, W0, W1);
+	R2(a, b, c, d, e, f, g, h, 32, 2, XW); SCHED_W_2(36, W2, W3, W4, W5, W0, W1);
+
+	/* Transform 33-35 + Precalc 39-41 */
+	R2(d, a, b, c, h, e, f, g, 33, 0, XW); SCHED_W_0(39, W3, W4, W5, W0, W1, W2);
+	R2(c, d, a, b, g, h, e, f, 34, 1, XW); SCHED_W_1(39, W3, W4, W5, W0, W1, W2);
+	R2(b, c, d, a, f, g, h, e, 35, 2, XW); SCHED_W_2(39, W3, W4, W5, W0, W1, W2);
+
+	/* Transform 36-38 + Precalc 42-44 */
+	R2(a, b, c, d, e, f, g, h, 36, 0, XW); SCHED_W_0(42, W4, W5, W0, W1, W2, W3);
+	R2(d, a, b, c, h, e, f, g, 37, 1, XW); SCHED_W_1(42, W4, W5, W0, W1, W2, W3);
+	R2(c, d, a, b, g, h, e, f, 38, 2, XW); SCHED_W_2(42, W4, W5, W0, W1, W2, W3);
+
+	/* Transform 39-41 + Precalc 45-47 */
+	R2(b, c, d, a, f, g, h, e, 39, 0, XW); SCHED_W_0(45, W5, W0, W1, W2, W3, W4);
+	R2(a, b, c, d, e, f, g, h, 40, 1, XW); SCHED_W_1(45, W5, W0, W1, W2, W3, W4);
+	R2(d, a, b, c, h, e, f, g, 41, 2, XW); SCHED_W_2(45, W5, W0, W1, W2, W3, W4);
+
+	/* Transform 42-44 + Precalc 48-50 */
+	R2(c, d, a, b, g, h, e, f, 42, 0, XW); SCHED_W_0(48, W0, W1, W2, W3, W4, W5);
+	R2(b, c, d, a, f, g, h, e, 43, 1, XW); SCHED_W_1(48, W0, W1, W2, W3, W4, W5);
+	R2(a, b, c, d, e, f, g, h, 44, 2, XW); SCHED_W_2(48, W0, W1, W2, W3, W4, W5);
+
+	/* Transform 45-47 + Precalc 51-53 */
+	R2(d, a, b, c, h, e, f, g, 45, 0, XW); SCHED_W_0(51, W1, W2, W3, W4, W5, W0);
+	R2(c, d, a, b, g, h, e, f, 46, 1, XW); SCHED_W_1(51, W1, W2, W3, W4, W5, W0);
+	R2(b, c, d, a, f, g, h, e, 47, 2, XW); SCHED_W_2(51, W1, W2, W3, W4, W5, W0);
+
+	/* Transform 48-50 + Precalc 54-56 */
+	R2(a, b, c, d, e, f, g, h, 48, 0, XW); SCHED_W_0(54, W2, W3, W4, W5, W0, W1);
+	R2(d, a, b, c, h, e, f, g, 49, 1, XW); SCHED_W_1(54, W2, W3, W4, W5, W0, W1);
+	R2(c, d, a, b, g, h, e, f, 50, 2, XW); SCHED_W_2(54, W2, W3, W4, W5, W0, W1);
+
+	/* Transform 51-53 + Precalc 57-59 */
+	R2(b, c, d, a, f, g, h, e, 51, 0, XW); SCHED_W_0(57, W3, W4, W5, W0, W1, W2);
+	R2(a, b, c, d, e, f, g, h, 52, 1, XW); SCHED_W_1(57, W3, W4, W5, W0, W1, W2);
+	R2(d, a, b, c, h, e, f, g, 53, 2, XW); SCHED_W_2(57, W3, W4, W5, W0, W1, W2);
+
+	/* Transform 54-56 + Precalc 60-62 */
+	R2(c, d, a, b, g, h, e, f, 54, 0, XW); SCHED_W_0(60, W4, W5, W0, W1, W2, W3);
+	R2(b, c, d, a, f, g, h, e, 55, 1, XW); SCHED_W_1(60, W4, W5, W0, W1, W2, W3);
+	R2(a, b, c, d, e, f, g, h, 56, 2, XW); SCHED_W_2(60, W4, W5, W0, W1, W2, W3);
+
+	/* Transform 57-59 + Precalc 63 */
+	R2(d, a, b, c, h, e, f, g, 57, 0, XW); SCHED_W_0(63, W5, W0, W1, W2, W3, W4);
+	R2(c, d, a, b, g, h, e, f, 58, 1, XW);
+	R2(b, c, d, a, f, g, h, e, 59, 2, XW); SCHED_W_1(63, W5, W0, W1, W2, W3, W4);
+
+	/* Transform 60-62 + Precalc 63 */
+	R2(a, b, c, d, e, f, g, h, 60, 0, XW);
+	R2(d, a, b, c, h, e, f, g, 61, 1, XW); SCHED_W_2(63, W5, W0, W1, W2, W3, W4);
+	R2(c, d, a, b, g, h, e, f, 62, 2, XW);
+
+	/* Transform 63 */
+	R2(b, c, d, a, f, g, h, e, 63, 0, XW);
+
+	/* Update the chaining variables. */
+	xorl state_h0(RSTATE), a;
+	xorl state_h1(RSTATE), b;
+	xorl state_h2(RSTATE), c;
+	xorl state_h3(RSTATE), d;
+	movl a, state_h0(RSTATE);
+	movl b, state_h1(RSTATE);
+	movl c, state_h2(RSTATE);
+	movl d, state_h3(RSTATE);
+	xorl state_h4(RSTATE), e;
+	xorl state_h5(RSTATE), f;
+	xorl state_h6(RSTATE), g;
+	xorl state_h7(RSTATE), h;
+	movl e, state_h4(RSTATE);
+	movl f, state_h5(RSTATE);
+	movl g, state_h6(RSTATE);
+	movl h, state_h7(RSTATE);
+
+	cmpq $0, RNBLKS;
+	jne .Loop;
+
+	vzeroall;
+
+	movq (STACK_REG_SAVE + 0 * 8)(%rsp), %rbx;
+	movq (STACK_REG_SAVE + 1 * 8)(%rsp), %r15;
+	movq (STACK_REG_SAVE + 2 * 8)(%rsp), %r14;
+	movq (STACK_REG_SAVE + 3 * 8)(%rsp), %r13;
+	movq (STACK_REG_SAVE + 4 * 8)(%rsp), %r12;
+
+	vmovdqa %xmm0, IW_W1_ADDR(0, 0);
+	vmovdqa %xmm0, IW_W1W2_ADDR(0, 0);
+	vmovdqa %xmm0, IW_W1_ADDR(4, 0);
+	vmovdqa %xmm0, IW_W1W2_ADDR(4, 0);
+	vmovdqa %xmm0, IW_W1_ADDR(8, 0);
+	vmovdqa %xmm0, IW_W1W2_ADDR(8, 0);
+
+	movq %rbp, %rsp;
+	popq %rbp;
+	ret;
+SYM_FUNC_END(sm3_transform_avx)
diff --git a/arch/x86/crypto/sm3_avx_glue.c b/arch/x86/crypto/sm3_avx_glue.c
new file mode 100644
index 000000000000..661b6f22ffcd
--- /dev/null
+++ b/arch/x86/crypto/sm3_avx_glue.c
@@ -0,0 +1,134 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * SM3 Secure Hash Algorithm, AVX assembler accelerated.
+ * specified in: https://datatracker.ietf.org/doc/html/draft-sca-cfrg-sm3-02
+ *
+ * Copyright (C) 2021 Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
+ */
+
+#define pr_fmt(fmt)	KBUILD_MODNAME ": " fmt
+
+#include <crypto/internal/hash.h>
+#include <crypto/internal/simd.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <crypto/sm3.h>
+#include <crypto/sm3_base.h>
+#include <asm/simd.h>
+
+asmlinkage void sm3_transform_avx(struct sm3_state *state,
+			const u8 *data, int nblocks);
+
+static int sm3_avx_update(struct shash_desc *desc, const u8 *data,
+			 unsigned int len)
+{
+	struct sm3_state *sctx = shash_desc_ctx(desc);
+
+	if (!crypto_simd_usable() ||
+			(sctx->count % SM3_BLOCK_SIZE) + len < SM3_BLOCK_SIZE) {
+		sm3_update(sctx, data, len);
+		return 0;
+	}
+
+	/*
+	 * Make sure struct sm3_state begins directly with the SM3
+	 * 256-bit internal state, as this is what the asm functions expect.
+	 */
+	BUILD_BUG_ON(offsetof(struct sm3_state, state) != 0);
+
+	kernel_fpu_begin();
+	sm3_base_do_update(desc, data, len, sm3_transform_avx);
+	kernel_fpu_end();
+
+	return 0;
+}
+
+static int sm3_avx_finup(struct shash_desc *desc, const u8 *data,
+		      unsigned int len, u8 *out)
+{
+	if (!crypto_simd_usable()) {
+		struct sm3_state *sctx = shash_desc_ctx(desc);
+
+		if (len)
+			sm3_update(sctx, data, len);
+
+		sm3_final(sctx, out);
+		return 0;
+	}
+
+	kernel_fpu_begin();
+	if (len)
+		sm3_base_do_update(desc, data, len, sm3_transform_avx);
+	sm3_base_do_finalize(desc, sm3_transform_avx);
+	kernel_fpu_end();
+
+	return sm3_base_finish(desc, out);
+}
+
+static int sm3_avx_final(struct shash_desc *desc, u8 *out)
+{
+	if (!crypto_simd_usable()) {
+		sm3_final(shash_desc_ctx(desc), out);
+		return 0;
+	}
+
+	kernel_fpu_begin();
+	sm3_base_do_finalize(desc, sm3_transform_avx);
+	kernel_fpu_end();
+
+	return sm3_base_finish(desc, out);
+}
+
+static struct shash_alg sm3_avx_alg = {
+	.digestsize	=	SM3_DIGEST_SIZE,
+	.init		=	sm3_base_init,
+	.update		=	sm3_avx_update,
+	.final		=	sm3_avx_final,
+	.finup		=	sm3_avx_finup,
+	.descsize	=	sizeof(struct sm3_state),
+	.base		=	{
+		.cra_name	=	"sm3",
+		.cra_driver_name =	"sm3-avx",
+		.cra_priority	=	300,
+		.cra_blocksize	=	SM3_BLOCK_SIZE,
+		.cra_module	=	THIS_MODULE,
+	}
+};
+
+static int __init sm3_avx_mod_init(void)
+{
+	const char *feature_name;
+
+	if (!boot_cpu_has(X86_FEATURE_AVX)) {
+		pr_info("AVX instruction are not detected.\n");
+		return -ENODEV;
+	}
+
+	if (!boot_cpu_has(X86_FEATURE_BMI2)) {
+		pr_info("BMI2 instruction are not detected.\n");
+		return -ENODEV;
+	}
+
+	if (!cpu_has_xfeatures(XFEATURE_MASK_SSE | XFEATURE_MASK_YMM,
+				&feature_name)) {
+		pr_info("CPU feature '%s' is not supported.\n", feature_name);
+		return -ENODEV;
+	}
+
+	return crypto_register_shash(&sm3_avx_alg);
+}
+
+static void __exit sm3_avx_mod_exit(void)
+{
+	crypto_unregister_shash(&sm3_avx_alg);
+}
+
+module_init(sm3_avx_mod_init);
+module_exit(sm3_avx_mod_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Tianjia Zhang <tianjia.zhang@linux.alibaba.com>");
+MODULE_DESCRIPTION("SM3 Secure Hash Algorithm, AVX assembler accelerated");
+MODULE_ALIAS_CRYPTO("sm3");
+MODULE_ALIAS_CRYPTO("sm3-avx");
diff --git a/arch/x86/events/core.c b/arch/x86/events/core.c
index e686c5e0537b..eef816fc216d 100644
--- a/arch/x86/events/core.c
+++ b/arch/x86/events/core.c
@@ -2794,7 +2794,7 @@ perf_callchain_kernel(struct perf_callchain_entry_ctx *entry, struct pt_regs *re
 static inline int
 valid_user_frame(const void __user *fp, unsigned long size)
 {
-	return (__range_not_ok(fp, size, TASK_SIZE) == 0);
+	return __access_ok(fp, size);
 }
 
 static unsigned long get_segment_base(unsigned int segment)
diff --git a/arch/x86/events/intel/core.c b/arch/x86/events/intel/core.c
index c91434056c29..e88791b420ee 100644
--- a/arch/x86/events/intel/core.c
+++ b/arch/x86/events/intel/core.c
@@ -181,6 +181,27 @@ static struct event_constraint intel_gen_event_constraints[] __read_mostly =
 	EVENT_CONSTRAINT_END
 };
 
+static struct event_constraint intel_v5_gen_event_constraints[] __read_mostly =
+{
+	FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */
+	FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */
+	FIXED_EVENT_CONSTRAINT(0x0300, 2), /* CPU_CLK_UNHALTED.REF */
+	FIXED_EVENT_CONSTRAINT(0x0400, 3), /* SLOTS */
+	FIXED_EVENT_CONSTRAINT(0x0500, 4),
+	FIXED_EVENT_CONSTRAINT(0x0600, 5),
+	FIXED_EVENT_CONSTRAINT(0x0700, 6),
+	FIXED_EVENT_CONSTRAINT(0x0800, 7),
+	FIXED_EVENT_CONSTRAINT(0x0900, 8),
+	FIXED_EVENT_CONSTRAINT(0x0a00, 9),
+	FIXED_EVENT_CONSTRAINT(0x0b00, 10),
+	FIXED_EVENT_CONSTRAINT(0x0c00, 11),
+	FIXED_EVENT_CONSTRAINT(0x0d00, 12),
+	FIXED_EVENT_CONSTRAINT(0x0e00, 13),
+	FIXED_EVENT_CONSTRAINT(0x0f00, 14),
+	FIXED_EVENT_CONSTRAINT(0x1000, 15),
+	EVENT_CONSTRAINT_END
+};
+
 static struct event_constraint intel_slm_event_constraints[] __read_mostly =
 {
 	FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */
@@ -4703,6 +4724,19 @@ static __initconst const struct x86_pmu intel_pmu = {
 	.lbr_read		= intel_pmu_lbr_read_64,
 	.lbr_save		= intel_pmu_lbr_save,
 	.lbr_restore		= intel_pmu_lbr_restore,
+
+	/*
+	 * SMM has access to all 4 rings and while traditionally SMM code only
+	 * ran in CPL0, 2021-era firmware is starting to make use of CPL3 in SMM.
+	 *
+	 * Since the EVENTSEL.{USR,OS} CPL filtering makes no distinction
+	 * between SMM or not, this results in what should be pure userspace
+	 * counters including SMM data.
+	 *
+	 * This is a clear privilege issue, therefore globally disable
+	 * counting SMM by default.
+	 */
+	.attr_freeze_on_smi	= 1,
 };
 
 static __init void intel_clovertown_quirk(void)
@@ -6295,7 +6329,9 @@ __init int intel_pmu_init(void)
 			pr_cont("generic architected perfmon v1, ");
 			name = "generic_arch_v1";
 			break;
-		default:
+		case 2:
+		case 3:
+		case 4:
 			/*
 			 * default constraints for v2 and up
 			 */
@@ -6303,6 +6339,21 @@ __init int intel_pmu_init(void)
 			pr_cont("generic architected perfmon, ");
 			name = "generic_arch_v2+";
 			break;
+		default:
+			/*
+			 * The default constraints for v5 and up can support up to
+			 * 16 fixed counters. For the fixed counters 4 and later,
+			 * the pseudo-encoding is applied.
+			 * The constraints may be cut according to the CPUID enumeration
+			 * by inserting the EVENT_CONSTRAINT_END.
+			 */
+			if (x86_pmu.num_counters_fixed > INTEL_PMC_MAX_FIXED)
+				x86_pmu.num_counters_fixed = INTEL_PMC_MAX_FIXED;
+			intel_v5_gen_event_constraints[x86_pmu.num_counters_fixed].weight = -1;
+			x86_pmu.event_constraints = intel_v5_gen_event_constraints;
+			pr_cont("generic architected perfmon, ");
+			name = "generic_arch_v5+";
+			break;
 		}
 	}
 
diff --git a/arch/x86/events/intel/ds.c b/arch/x86/events/intel/ds.c
index 2e215369df4a..376cc3d66094 100644
--- a/arch/x86/events/intel/ds.c
+++ b/arch/x86/events/intel/ds.c
@@ -1203,7 +1203,10 @@ static void intel_pmu_pebs_via_pt_enable(struct perf_event *event)
 	if (hwc->idx >= INTEL_PMC_IDX_FIXED) {
 		base = MSR_RELOAD_FIXED_CTR0;
 		idx = hwc->idx - INTEL_PMC_IDX_FIXED;
-		value = ds->pebs_event_reset[MAX_PEBS_EVENTS + idx];
+		if (x86_pmu.intel_cap.pebs_format < 5)
+			value = ds->pebs_event_reset[MAX_PEBS_EVENTS_FMT4 + idx];
+		else
+			value = ds->pebs_event_reset[MAX_PEBS_EVENTS + idx];
 	}
 	wrmsrl(base + idx, value);
 }
@@ -1232,8 +1235,12 @@ void intel_pmu_pebs_enable(struct perf_event *event)
 		}
 	}
 
-	if (idx >= INTEL_PMC_IDX_FIXED)
-		idx = MAX_PEBS_EVENTS + (idx - INTEL_PMC_IDX_FIXED);
+	if (idx >= INTEL_PMC_IDX_FIXED) {
+		if (x86_pmu.intel_cap.pebs_format < 5)
+			idx = MAX_PEBS_EVENTS_FMT4 + (idx - INTEL_PMC_IDX_FIXED);
+		else
+			idx = MAX_PEBS_EVENTS + (idx - INTEL_PMC_IDX_FIXED);
+	}
 
 	/*
 	 * Use auto-reload if possible to save a MSR write in the PMI.
@@ -2204,6 +2211,7 @@ void __init intel_ds_init(void)
 			break;
 
 		case 4:
+		case 5:
 			x86_pmu.drain_pebs = intel_pmu_drain_pebs_icl;
 			x86_pmu.pebs_record_size = sizeof(struct pebs_basic);
 			if (x86_pmu.intel_cap.pebs_baseline) {
diff --git a/arch/x86/events/intel/lbr.c b/arch/x86/events/intel/lbr.c
index 669c2be14784..fe1742c4ca49 100644
--- a/arch/x86/events/intel/lbr.c
+++ b/arch/x86/events/intel/lbr.c
@@ -1329,10 +1329,10 @@ static int branch_map[X86_BR_TYPE_MAP_MAX] = {
 	PERF_BR_SYSCALL,	/* X86_BR_SYSCALL */
 	PERF_BR_SYSRET,		/* X86_BR_SYSRET */
 	PERF_BR_UNKNOWN,	/* X86_BR_INT */
-	PERF_BR_UNKNOWN,	/* X86_BR_IRET */
+	PERF_BR_ERET,		/* X86_BR_IRET */
 	PERF_BR_COND,		/* X86_BR_JCC */
 	PERF_BR_UNCOND,		/* X86_BR_JMP */
-	PERF_BR_UNKNOWN,	/* X86_BR_IRQ */
+	PERF_BR_IRQ,		/* X86_BR_IRQ */
 	PERF_BR_IND_CALL,	/* X86_BR_IND_CALL */
 	PERF_BR_UNKNOWN,	/* X86_BR_ABORT */
 	PERF_BR_UNKNOWN,	/* X86_BR_IN_TX */
diff --git a/arch/x86/events/intel/pt.c b/arch/x86/events/intel/pt.c
index 7f406c14715f..82ef87e9a897 100644
--- a/arch/x86/events/intel/pt.c
+++ b/arch/x86/events/intel/pt.c
@@ -13,6 +13,8 @@
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 #include <linux/types.h>
+#include <linux/bits.h>
+#include <linux/limits.h>
 #include <linux/slab.h>
 #include <linux/device.h>
 
@@ -57,6 +59,8 @@ static struct pt_cap_desc {
 	PT_CAP(mtc,			0, CPUID_EBX, BIT(3)),
 	PT_CAP(ptwrite,			0, CPUID_EBX, BIT(4)),
 	PT_CAP(power_event_trace,	0, CPUID_EBX, BIT(5)),
+	PT_CAP(event_trace,		0, CPUID_EBX, BIT(7)),
+	PT_CAP(tnt_disable,		0, CPUID_EBX, BIT(8)),
 	PT_CAP(topa_output,		0, CPUID_ECX, BIT(0)),
 	PT_CAP(topa_multiple_entries,	0, CPUID_ECX, BIT(1)),
 	PT_CAP(single_range_output,	0, CPUID_ECX, BIT(2)),
@@ -108,6 +112,8 @@ PMU_FORMAT_ATTR(tsc,		"config:10"	);
 PMU_FORMAT_ATTR(noretcomp,	"config:11"	);
 PMU_FORMAT_ATTR(ptw,		"config:12"	);
 PMU_FORMAT_ATTR(branch,		"config:13"	);
+PMU_FORMAT_ATTR(event,		"config:31"	);
+PMU_FORMAT_ATTR(notnt,		"config:55"	);
 PMU_FORMAT_ATTR(mtc_period,	"config:14-17"	);
 PMU_FORMAT_ATTR(cyc_thresh,	"config:19-22"	);
 PMU_FORMAT_ATTR(psb_period,	"config:24-27"	);
@@ -116,6 +122,8 @@ static struct attribute *pt_formats_attr[] = {
 	&format_attr_pt.attr,
 	&format_attr_cyc.attr,
 	&format_attr_pwr_evt.attr,
+	&format_attr_event.attr,
+	&format_attr_notnt.attr,
 	&format_attr_fup_on_ptw.attr,
 	&format_attr_mtc.attr,
 	&format_attr_tsc.attr,
@@ -296,6 +304,8 @@ fail:
 			RTIT_CTL_CYC_PSB	| \
 			RTIT_CTL_MTC		| \
 			RTIT_CTL_PWR_EVT_EN	| \
+			RTIT_CTL_EVENT_EN	| \
+			RTIT_CTL_NOTNT		| \
 			RTIT_CTL_FUP_ON_PTW	| \
 			RTIT_CTL_PTW_EN)
 
@@ -350,6 +360,14 @@ static bool pt_event_valid(struct perf_event *event)
 	    !intel_pt_validate_hw_cap(PT_CAP_power_event_trace))
 		return false;
 
+	if (config & RTIT_CTL_EVENT_EN &&
+	    !intel_pt_validate_hw_cap(PT_CAP_event_trace))
+		return false;
+
+	if (config & RTIT_CTL_NOTNT &&
+	    !intel_pt_validate_hw_cap(PT_CAP_tnt_disable))
+		return false;
+
 	if (config & RTIT_CTL_PTW) {
 		if (!intel_pt_validate_hw_cap(PT_CAP_ptwrite))
 			return false;
@@ -472,7 +490,7 @@ static u64 pt_config_filters(struct perf_event *event)
 			pt->filters.filter[range].msr_b = filter->msr_b;
 		}
 
-		rtit_ctl |= filter->config << pt_address_ranges[range].reg_off;
+		rtit_ctl |= (u64)filter->config << pt_address_ranges[range].reg_off;
 	}
 
 	return rtit_ctl;
@@ -897,8 +915,9 @@ static void pt_handle_status(struct pt *pt)
 		 * means we are already losing data; need to let the decoder
 		 * know.
 		 */
-		if (!intel_pt_validate_hw_cap(PT_CAP_topa_multiple_entries) ||
-		    buf->output_off == pt_buffer_region_size(buf)) {
+		if (!buf->single &&
+		    (!intel_pt_validate_hw_cap(PT_CAP_topa_multiple_entries) ||
+		     buf->output_off == pt_buffer_region_size(buf))) {
 			perf_aux_output_flag(&pt->handle,
 			                     PERF_AUX_FLAG_TRUNCATED);
 			advance++;
@@ -1347,10 +1366,26 @@ static void pt_addr_filters_fini(struct perf_event *event)
 	event->hw.addr_filters = NULL;
 }
 
-static inline bool valid_kernel_ip(unsigned long ip)
+#ifdef CONFIG_X86_64
+/* Clamp to a canonical address greater-than-or-equal-to the address given */
+static u64 clamp_to_ge_canonical_addr(u64 vaddr, u8 vaddr_bits)
+{
+	return __is_canonical_address(vaddr, vaddr_bits) ?
+	       vaddr :
+	       -BIT_ULL(vaddr_bits - 1);
+}
+
+/* Clamp to a canonical address less-than-or-equal-to the address given */
+static u64 clamp_to_le_canonical_addr(u64 vaddr, u8 vaddr_bits)
 {
-	return virt_addr_valid(ip) && kernel_ip(ip);
+	return __is_canonical_address(vaddr, vaddr_bits) ?
+	       vaddr :
+	       BIT_ULL(vaddr_bits - 1) - 1;
 }
+#else
+#define clamp_to_ge_canonical_addr(x, y) (x)
+#define clamp_to_le_canonical_addr(x, y) (x)
+#endif
 
 static int pt_event_addr_filters_validate(struct list_head *filters)
 {
@@ -1366,14 +1401,6 @@ static int pt_event_addr_filters_validate(struct list_head *filters)
 		    filter->action == PERF_ADDR_FILTER_ACTION_START)
 			return -EOPNOTSUPP;
 
-		if (!filter->path.dentry) {
-			if (!valid_kernel_ip(filter->offset))
-				return -EINVAL;
-
-			if (!valid_kernel_ip(filter->offset + filter->size))
-				return -EINVAL;
-		}
-
 		if (++range > intel_pt_validate_hw_cap(PT_CAP_num_address_ranges))
 			return -EOPNOTSUPP;
 	}
@@ -1397,9 +1424,26 @@ static void pt_event_addr_filters_sync(struct perf_event *event)
 		if (filter->path.dentry && !fr[range].start) {
 			msr_a = msr_b = 0;
 		} else {
-			/* apply the offset */
-			msr_a = fr[range].start;
-			msr_b = msr_a + fr[range].size - 1;
+			unsigned long n = fr[range].size - 1;
+			unsigned long a = fr[range].start;
+			unsigned long b;
+
+			if (a > ULONG_MAX - n)
+				b = ULONG_MAX;
+			else
+				b = a + n;
+			/*
+			 * Apply the offset. 64-bit addresses written to the
+			 * MSRs must be canonical, but the range can encompass
+			 * non-canonical addresses. Since software cannot
+			 * execute at non-canonical addresses, adjusting to
+			 * canonical addresses does not affect the result of the
+			 * address filter.
+			 */
+			msr_a = clamp_to_ge_canonical_addr(a, boot_cpu_data.x86_virt_bits);
+			msr_b = clamp_to_le_canonical_addr(b, boot_cpu_data.x86_virt_bits);
+			if (msr_b < msr_a)
+				msr_a = msr_b = 0;
 		}
 
 		filters->filter[range].msr_a  = msr_a;
diff --git a/arch/x86/events/intel/uncore_discovery.c b/arch/x86/events/intel/uncore_discovery.c
index 6ddadb482f68..5fd72d4b8bbb 100644
--- a/arch/x86/events/intel/uncore_discovery.c
+++ b/arch/x86/events/intel/uncore_discovery.c
@@ -215,10 +215,18 @@ static int parse_discovery_table(struct pci_dev *dev, int die,
 
 	pci_read_config_dword(dev, bar_offset, &val);
 
-	if (val & UNCORE_DISCOVERY_MASK)
+	if (val & ~PCI_BASE_ADDRESS_MEM_MASK & ~PCI_BASE_ADDRESS_MEM_TYPE_64)
 		return -EINVAL;
 
-	addr = (resource_size_t)(val & ~UNCORE_DISCOVERY_MASK);
+	addr = (resource_size_t)(val & PCI_BASE_ADDRESS_MEM_MASK);
+#ifdef CONFIG_PHYS_ADDR_T_64BIT
+	if ((val & PCI_BASE_ADDRESS_MEM_TYPE_MASK) == PCI_BASE_ADDRESS_MEM_TYPE_64) {
+		u32 val2;
+
+		pci_read_config_dword(dev, bar_offset + 4, &val2);
+		addr |= ((resource_size_t)val2) << 32;
+	}
+#endif
 	size = UNCORE_DISCOVERY_GLOBAL_MAP_SIZE;
 	io_addr = ioremap(addr, size);
 	if (!io_addr)
@@ -444,7 +452,7 @@ static struct intel_uncore_ops generic_uncore_pci_ops = {
 
 #define UNCORE_GENERIC_MMIO_SIZE		0x4000
 
-static unsigned int generic_uncore_mmio_box_ctl(struct intel_uncore_box *box)
+static u64 generic_uncore_mmio_box_ctl(struct intel_uncore_box *box)
 {
 	struct intel_uncore_type *type = box->pmu->type;
 
@@ -456,7 +464,7 @@ static unsigned int generic_uncore_mmio_box_ctl(struct intel_uncore_box *box)
 
 void intel_generic_uncore_mmio_init_box(struct intel_uncore_box *box)
 {
-	unsigned int box_ctl = generic_uncore_mmio_box_ctl(box);
+	u64 box_ctl = generic_uncore_mmio_box_ctl(box);
 	struct intel_uncore_type *type = box->pmu->type;
 	resource_size_t addr;
 
diff --git a/arch/x86/events/intel/uncore_discovery.h b/arch/x86/events/intel/uncore_discovery.h
index cfaf558bdb6b..f4439357779a 100644
--- a/arch/x86/events/intel/uncore_discovery.h
+++ b/arch/x86/events/intel/uncore_discovery.h
@@ -18,8 +18,6 @@
 #define UNCORE_DISCOVERY_BIR_BASE		0x10
 /* Discovery table BAR step */
 #define UNCORE_DISCOVERY_BIR_STEP		0x4
-/* Mask of the discovery table offset */
-#define UNCORE_DISCOVERY_MASK			0xf
 /* Global discovery table size */
 #define UNCORE_DISCOVERY_GLOBAL_MAP_SIZE	0x20
 
diff --git a/arch/x86/include/asm/bug.h b/arch/x86/include/asm/bug.h
index 84b87538a15d..bab883c0b6fe 100644
--- a/arch/x86/include/asm/bug.h
+++ b/arch/x86/include/asm/bug.h
@@ -22,7 +22,7 @@
 
 #ifdef CONFIG_DEBUG_BUGVERBOSE
 
-#define _BUG_FLAGS(ins, flags)						\
+#define _BUG_FLAGS(ins, flags, extra)					\
 do {									\
 	asm_inline volatile("1:\t" ins "\n"				\
 		     ".pushsection __bug_table,\"aw\"\n"		\
@@ -31,7 +31,8 @@ do {									\
 		     "\t.word %c1"        "\t# bug_entry::line\n"	\
 		     "\t.word %c2"        "\t# bug_entry::flags\n"	\
 		     "\t.org 2b+%c3\n"					\
-		     ".popsection"					\
+		     ".popsection\n"					\
+		     extra						\
 		     : : "i" (__FILE__), "i" (__LINE__),		\
 			 "i" (flags),					\
 			 "i" (sizeof(struct bug_entry)));		\
@@ -39,14 +40,15 @@ do {									\
 
 #else /* !CONFIG_DEBUG_BUGVERBOSE */
 
-#define _BUG_FLAGS(ins, flags)						\
+#define _BUG_FLAGS(ins, flags, extra)					\
 do {									\
 	asm_inline volatile("1:\t" ins "\n"				\
 		     ".pushsection __bug_table,\"aw\"\n"		\
 		     "2:\t" __BUG_REL(1b) "\t# bug_entry::bug_addr\n"	\
 		     "\t.word %c0"        "\t# bug_entry::flags\n"	\
 		     "\t.org 2b+%c1\n"					\
-		     ".popsection"					\
+		     ".popsection\n"					\
+		     extra						\
 		     : : "i" (flags),					\
 			 "i" (sizeof(struct bug_entry)));		\
 } while (0)
@@ -55,7 +57,7 @@ do {									\
 
 #else
 
-#define _BUG_FLAGS(ins, flags)  asm volatile(ins)
+#define _BUG_FLAGS(ins, flags, extra)  asm volatile(ins)
 
 #endif /* CONFIG_GENERIC_BUG */
 
@@ -63,8 +65,8 @@ do {									\
 #define BUG()							\
 do {								\
 	instrumentation_begin();				\
-	_BUG_FLAGS(ASM_UD2, 0);					\
-	unreachable();						\
+	_BUG_FLAGS(ASM_UD2, 0, "");				\
+	__builtin_unreachable();				\
 } while (0)
 
 /*
@@ -75,9 +77,9 @@ do {								\
  */
 #define __WARN_FLAGS(flags)					\
 do {								\
+	__auto_type f = BUGFLAG_WARNING|(flags);		\
 	instrumentation_begin();				\
-	_BUG_FLAGS(ASM_UD2, BUGFLAG_WARNING|(flags));		\
-	annotate_reachable();					\
+	_BUG_FLAGS(ASM_UD2, f, ASM_REACHABLE);			\
 	instrumentation_end();					\
 } while (0)
 
diff --git a/arch/x86/include/asm/coco.h b/arch/x86/include/asm/coco.h
new file mode 100644
index 000000000000..3d98c3a60d34
--- /dev/null
+++ b/arch/x86/include/asm/coco.h
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_X86_COCO_H
+#define _ASM_X86_COCO_H
+
+#include <asm/types.h>
+
+enum cc_vendor {
+	CC_VENDOR_NONE,
+	CC_VENDOR_AMD,
+	CC_VENDOR_HYPERV,
+	CC_VENDOR_INTEL,
+};
+
+void cc_set_vendor(enum cc_vendor v);
+void cc_set_mask(u64 mask);
+
+#ifdef CONFIG_ARCH_HAS_CC_PLATFORM
+u64 cc_mkenc(u64 val);
+u64 cc_mkdec(u64 val);
+#else
+static inline u64 cc_mkenc(u64 val)
+{
+	return val;
+}
+
+static inline u64 cc_mkdec(u64 val)
+{
+	return val;
+}
+#endif
+
+#endif /* _ASM_X86_COCO_H */
diff --git a/arch/x86/include/asm/cpufeatures.h b/arch/x86/include/asm/cpufeatures.h
index 6db4e2932b3d..3edf05e98e58 100644
--- a/arch/x86/include/asm/cpufeatures.h
+++ b/arch/x86/include/asm/cpufeatures.h
@@ -204,7 +204,7 @@
 /* FREE!                                ( 7*32+10) */
 #define X86_FEATURE_PTI			( 7*32+11) /* Kernel Page Table Isolation enabled */
 #define X86_FEATURE_RETPOLINE		( 7*32+12) /* "" Generic Retpoline mitigation for Spectre variant 2 */
-#define X86_FEATURE_RETPOLINE_AMD	( 7*32+13) /* "" AMD Retpoline mitigation for Spectre variant 2 */
+#define X86_FEATURE_RETPOLINE_LFENCE	( 7*32+13) /* "" Use LFENCE for Spectre variant 2 */
 #define X86_FEATURE_INTEL_PPIN		( 7*32+14) /* Intel Processor Inventory Number */
 #define X86_FEATURE_CDP_L2		( 7*32+15) /* Code and Data Prioritization L2 */
 #define X86_FEATURE_MSR_SPEC_CTRL	( 7*32+16) /* "" MSR SPEC_CTRL is implemented */
@@ -299,9 +299,6 @@
 /* Intel-defined CPU features, CPUID level 0x00000007:1 (EAX), word 12 */
 #define X86_FEATURE_AVX_VNNI		(12*32+ 4) /* AVX VNNI instructions */
 #define X86_FEATURE_AVX512_BF16		(12*32+ 5) /* AVX512 BFLOAT16 instructions */
-#define X86_FEATURE_AMX_BF16		(18*32+22) /* AMX bf16 Support */
-#define X86_FEATURE_AMX_TILE		(18*32+24) /* AMX tile Support */
-#define X86_FEATURE_AMX_INT8		(18*32+25) /* AMX int8 Support */
 
 /* AMD-defined CPU features, CPUID level 0x80000008 (EBX), word 13 */
 #define X86_FEATURE_CLZERO		(13*32+ 0) /* CLZERO instruction */
@@ -330,6 +327,7 @@
 #define X86_FEATURE_HWP_ACT_WINDOW	(14*32+ 9) /* HWP Activity Window */
 #define X86_FEATURE_HWP_EPP		(14*32+10) /* HWP Energy Perf. Preference */
 #define X86_FEATURE_HWP_PKG_REQ		(14*32+11) /* HWP Package Level Request */
+#define X86_FEATURE_HFI			(14*32+19) /* Hardware Feedback Interface */
 
 /* AMD SVM Feature Identification, CPUID level 0x8000000a (EDX), word 15 */
 #define X86_FEATURE_NPT			(15*32+ 0) /* Nested Page Table support */
@@ -390,7 +388,10 @@
 #define X86_FEATURE_TSXLDTRK		(18*32+16) /* TSX Suspend Load Address Tracking */
 #define X86_FEATURE_PCONFIG		(18*32+18) /* Intel PCONFIG */
 #define X86_FEATURE_ARCH_LBR		(18*32+19) /* Intel ARCH LBR */
+#define X86_FEATURE_AMX_BF16		(18*32+22) /* AMX bf16 Support */
 #define X86_FEATURE_AVX512_FP16		(18*32+23) /* AVX512 FP16 */
+#define X86_FEATURE_AMX_TILE		(18*32+24) /* AMX tile Support */
+#define X86_FEATURE_AMX_INT8		(18*32+25) /* AMX int8 Support */
 #define X86_FEATURE_SPEC_CTRL		(18*32+26) /* "" Speculation Control (IBRS + IBPB) */
 #define X86_FEATURE_INTEL_STIBP		(18*32+27) /* "" Single Thread Indirect Branch Predictors */
 #define X86_FEATURE_FLUSH_L1D		(18*32+28) /* Flush L1D cache */
diff --git a/arch/x86/include/asm/cpumask.h b/arch/x86/include/asm/cpumask.h
index 3afa990d756b..c5aed9e9226c 100644
--- a/arch/x86/include/asm/cpumask.h
+++ b/arch/x86/include/asm/cpumask.h
@@ -20,11 +20,21 @@ static __always_inline bool arch_cpu_online(int cpu)
 {
 	return arch_test_bit(cpu, cpumask_bits(cpu_online_mask));
 }
+
+static __always_inline void arch_cpumask_clear_cpu(int cpu, struct cpumask *dstp)
+{
+	arch_clear_bit(cpumask_check(cpu), cpumask_bits(dstp));
+}
 #else
 static __always_inline bool arch_cpu_online(int cpu)
 {
 	return cpu == 0;
 }
+
+static __always_inline void arch_cpumask_clear_cpu(int cpu, struct cpumask *dstp)
+{
+	return;
+}
 #endif
 
 #define arch_cpu_is_offline(cpu)	unlikely(!arch_cpu_online(cpu))
diff --git a/arch/x86/include/asm/disabled-features.h b/arch/x86/include/asm/disabled-features.h
index 8f28fafa98b3..1231d63f836d 100644
--- a/arch/x86/include/asm/disabled-features.h
+++ b/arch/x86/include/asm/disabled-features.h
@@ -56,8 +56,11 @@
 # define DISABLE_PTI		(1 << (X86_FEATURE_PTI & 31))
 #endif
 
-/* Force disable because it's broken beyond repair */
-#define DISABLE_ENQCMD		(1 << (X86_FEATURE_ENQCMD & 31))
+#ifdef CONFIG_INTEL_IOMMU_SVM
+# define DISABLE_ENQCMD		0
+#else
+# define DISABLE_ENQCMD		(1 << (X86_FEATURE_ENQCMD & 31))
+#endif
 
 #ifdef CONFIG_X86_SGX
 # define DISABLE_SGX	0
diff --git a/arch/x86/include/asm/insn.h b/arch/x86/include/asm/insn.h
index 05a6ab940f45..1b29f58f730f 100644
--- a/arch/x86/include/asm/insn.h
+++ b/arch/x86/include/asm/insn.h
@@ -124,7 +124,7 @@ struct insn {
 #define X86_VEX_B(vex)	((vex) & 0x20)	/* VEX3 Byte1 */
 #define X86_VEX_L(vex)	((vex) & 0x04)	/* VEX3 Byte2, VEX2 Byte1 */
 /* VEX bit fields */
-#define X86_EVEX_M(vex)	((vex) & 0x03)		/* EVEX Byte1 */
+#define X86_EVEX_M(vex)	((vex) & 0x07)		/* EVEX Byte1 */
 #define X86_VEX3_M(vex)	((vex) & 0x1f)		/* VEX3 Byte1 */
 #define X86_VEX2_M	1			/* VEX2.M always 1 */
 #define X86_VEX_V(vex)	(((vex) & 0x78) >> 3)	/* VEX3 Byte2, VEX2 Byte1 */
diff --git a/arch/x86/include/asm/intel_ds.h b/arch/x86/include/asm/intel_ds.h
index 8380c3ddd4b2..2f9eeb5c3069 100644
--- a/arch/x86/include/asm/intel_ds.h
+++ b/arch/x86/include/asm/intel_ds.h
@@ -7,8 +7,9 @@
 #define PEBS_BUFFER_SIZE	(PAGE_SIZE << 4)
 
 /* The maximal number of PEBS events: */
-#define MAX_PEBS_EVENTS		8
-#define MAX_FIXED_PEBS_EVENTS	4
+#define MAX_PEBS_EVENTS_FMT4	8
+#define MAX_PEBS_EVENTS		32
+#define MAX_FIXED_PEBS_EVENTS	16
 
 /*
  * A debug store configuration.
diff --git a/arch/x86/include/asm/intel_pt.h b/arch/x86/include/asm/intel_pt.h
index ebe8d2ea44fe..c796e9bc98b6 100644
--- a/arch/x86/include/asm/intel_pt.h
+++ b/arch/x86/include/asm/intel_pt.h
@@ -13,6 +13,8 @@ enum pt_capabilities {
 	PT_CAP_mtc,
 	PT_CAP_ptwrite,
 	PT_CAP_power_event_trace,
+	PT_CAP_event_trace,
+	PT_CAP_tnt_disable,
 	PT_CAP_topa_output,
 	PT_CAP_topa_multiple_entries,
 	PT_CAP_single_range_output,
diff --git a/arch/x86/include/asm/kvm-x86-ops.h b/arch/x86/include/asm/kvm-x86-ops.h
index 631d5040b31e..d39e0de06be2 100644
--- a/arch/x86/include/asm/kvm-x86-ops.h
+++ b/arch/x86/include/asm/kvm-x86-ops.h
@@ -82,7 +82,7 @@ KVM_X86_OP_NULL(guest_apic_has_interrupt)
 KVM_X86_OP(load_eoi_exitmap)
 KVM_X86_OP(set_virtual_apic_mode)
 KVM_X86_OP_NULL(set_apic_access_page_addr)
-KVM_X86_OP(deliver_posted_interrupt)
+KVM_X86_OP(deliver_interrupt)
 KVM_X86_OP_NULL(sync_pir_to_irr)
 KVM_X86_OP(set_tss_addr)
 KVM_X86_OP(set_identity_map_addr)
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 6e7c545bc7ee..b61e46743184 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -498,6 +498,7 @@ struct kvm_pmc {
 	bool intr;
 };
 
+#define KVM_PMC_MAX_FIXED	3
 struct kvm_pmu {
 	unsigned nr_arch_gp_counters;
 	unsigned nr_arch_fixed_counters;
@@ -511,7 +512,7 @@ struct kvm_pmu {
 	u64 reserved_bits;
 	u8 version;
 	struct kvm_pmc gp_counters[INTEL_PMC_MAX_GENERIC];
-	struct kvm_pmc fixed_counters[INTEL_PMC_MAX_FIXED];
+	struct kvm_pmc fixed_counters[KVM_PMC_MAX_FIXED];
 	struct irq_work irq_work;
 	DECLARE_BITMAP(reprogram_pmi, X86_PMC_IDX_MAX);
 	DECLARE_BITMAP(all_valid_pmc_idx, X86_PMC_IDX_MAX);
@@ -703,7 +704,6 @@ struct kvm_vcpu_arch {
 	struct fpu_guest guest_fpu;
 
 	u64 xcr0;
-	u64 guest_supported_xcr0;
 
 	struct kvm_pio_request pio;
 	void *pio_data;
@@ -1410,7 +1410,8 @@ struct kvm_x86_ops {
 	void (*load_eoi_exitmap)(struct kvm_vcpu *vcpu, u64 *eoi_exit_bitmap);
 	void (*set_virtual_apic_mode)(struct kvm_vcpu *vcpu);
 	void (*set_apic_access_page_addr)(struct kvm_vcpu *vcpu);
-	int (*deliver_posted_interrupt)(struct kvm_vcpu *vcpu, int vector);
+	void (*deliver_interrupt)(struct kvm_lapic *apic, int delivery_mode,
+				  int trig_mode, int vector);
 	int (*sync_pir_to_irr)(struct kvm_vcpu *vcpu);
 	int (*set_tss_addr)(struct kvm *kvm, unsigned int addr);
 	int (*set_identity_map_addr)(struct kvm *kvm, u64 ident_addr);
diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
index 3faf0f97edb1..9f1741ac4769 100644
--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -205,6 +205,8 @@
 #define RTIT_CTL_DISRETC		BIT(11)
 #define RTIT_CTL_PTW_EN			BIT(12)
 #define RTIT_CTL_BRANCH_EN		BIT(13)
+#define RTIT_CTL_EVENT_EN		BIT(31)
+#define RTIT_CTL_NOTNT			BIT_ULL(55)
 #define RTIT_CTL_MTC_RANGE_OFFSET	14
 #define RTIT_CTL_MTC_RANGE		(0x0full << RTIT_CTL_MTC_RANGE_OFFSET)
 #define RTIT_CTL_CYC_THRESH_OFFSET	19
@@ -476,6 +478,7 @@
 #define MSR_AMD64_ICIBSEXTDCTL		0xc001103c
 #define MSR_AMD64_IBSOPDATA4		0xc001103d
 #define MSR_AMD64_IBS_REG_COUNT_MAX	8 /* includes MSR_AMD64_IBSBRTARGET */
+#define MSR_AMD64_SVM_AVIC_DOORBELL	0xc001011b
 #define MSR_AMD64_VM_PAGE_FLUSH		0xc001011e
 #define MSR_AMD64_SEV_ES_GHCB		0xc0010130
 #define MSR_AMD64_SEV			0xc0010131
@@ -704,12 +707,14 @@
 
 #define PACKAGE_THERM_STATUS_PROCHOT		(1 << 0)
 #define PACKAGE_THERM_STATUS_POWER_LIMIT	(1 << 10)
+#define PACKAGE_THERM_STATUS_HFI_UPDATED	(1 << 26)
 
 #define MSR_IA32_PACKAGE_THERM_INTERRUPT	0x000001b2
 
 #define PACKAGE_THERM_INT_HIGH_ENABLE		(1 << 0)
 #define PACKAGE_THERM_INT_LOW_ENABLE		(1 << 1)
 #define PACKAGE_THERM_INT_PLN_ENABLE		(1 << 24)
+#define PACKAGE_THERM_INT_HFI_ENABLE		(1 << 25)
 
 /* Thermal Thresholds Support */
 #define THERM_INT_THRESHOLD0_ENABLE    (1 << 15)
@@ -958,4 +963,8 @@
 #define MSR_VM_IGNNE                    0xc0010115
 #define MSR_VM_HSAVE_PA                 0xc0010117
 
+/* Hardware Feedback Interface */
+#define MSR_IA32_HW_FEEDBACK_PTR        0x17d0
+#define MSR_IA32_HW_FEEDBACK_CONFIG     0x17d1
+
 #endif /* _ASM_X86_MSR_INDEX_H */
diff --git a/arch/x86/include/asm/nospec-branch.h b/arch/x86/include/asm/nospec-branch.h
index cc74dc584836..acbaeaf83b61 100644
--- a/arch/x86/include/asm/nospec-branch.h
+++ b/arch/x86/include/asm/nospec-branch.h
@@ -84,7 +84,7 @@
 #ifdef CONFIG_RETPOLINE
 	ALTERNATIVE_2 __stringify(ANNOTATE_RETPOLINE_SAFE; jmp *%\reg), \
 		      __stringify(jmp __x86_indirect_thunk_\reg), X86_FEATURE_RETPOLINE, \
-		      __stringify(lfence; ANNOTATE_RETPOLINE_SAFE; jmp *%\reg), X86_FEATURE_RETPOLINE_AMD
+		      __stringify(lfence; ANNOTATE_RETPOLINE_SAFE; jmp *%\reg), X86_FEATURE_RETPOLINE_LFENCE
 #else
 	jmp	*%\reg
 #endif
@@ -94,7 +94,7 @@
 #ifdef CONFIG_RETPOLINE
 	ALTERNATIVE_2 __stringify(ANNOTATE_RETPOLINE_SAFE; call *%\reg), \
 		      __stringify(call __x86_indirect_thunk_\reg), X86_FEATURE_RETPOLINE, \
-		      __stringify(lfence; ANNOTATE_RETPOLINE_SAFE; call *%\reg), X86_FEATURE_RETPOLINE_AMD
+		      __stringify(lfence; ANNOTATE_RETPOLINE_SAFE; call *%\reg), X86_FEATURE_RETPOLINE_LFENCE
 #else
 	call	*%\reg
 #endif
@@ -146,7 +146,7 @@ extern retpoline_thunk_t __x86_indirect_thunk_array[];
 	"lfence;\n"						\
 	ANNOTATE_RETPOLINE_SAFE					\
 	"call *%[thunk_target]\n",				\
-	X86_FEATURE_RETPOLINE_AMD)
+	X86_FEATURE_RETPOLINE_LFENCE)
 
 # define THUNK_TARGET(addr) [thunk_target] "r" (addr)
 
@@ -176,7 +176,7 @@ extern retpoline_thunk_t __x86_indirect_thunk_array[];
 	"lfence;\n"						\
 	ANNOTATE_RETPOLINE_SAFE					\
 	"call *%[thunk_target]\n",				\
-	X86_FEATURE_RETPOLINE_AMD)
+	X86_FEATURE_RETPOLINE_LFENCE)
 
 # define THUNK_TARGET(addr) [thunk_target] "rm" (addr)
 #endif
@@ -188,9 +188,11 @@ extern retpoline_thunk_t __x86_indirect_thunk_array[];
 /* The Spectre V2 mitigation variants */
 enum spectre_v2_mitigation {
 	SPECTRE_V2_NONE,
-	SPECTRE_V2_RETPOLINE_GENERIC,
-	SPECTRE_V2_RETPOLINE_AMD,
-	SPECTRE_V2_IBRS_ENHANCED,
+	SPECTRE_V2_RETPOLINE,
+	SPECTRE_V2_LFENCE,
+	SPECTRE_V2_EIBRS,
+	SPECTRE_V2_EIBRS_RETPOLINE,
+	SPECTRE_V2_EIBRS_LFENCE,
 };
 
 /* The indirect branch speculation control variants */
diff --git a/arch/x86/include/asm/page.h b/arch/x86/include/asm/page.h
index 4d5810c8fab7..9cc82f305f4b 100644
--- a/arch/x86/include/asm/page.h
+++ b/arch/x86/include/asm/page.h
@@ -71,6 +71,16 @@ static inline void copy_user_page(void *to, void *from, unsigned long vaddr,
 extern bool __virt_addr_valid(unsigned long kaddr);
 #define virt_addr_valid(kaddr)	__virt_addr_valid((unsigned long) (kaddr))
 
+static __always_inline u64 __canonical_address(u64 vaddr, u8 vaddr_bits)
+{
+	return ((s64)vaddr << (64 - vaddr_bits)) >> (64 - vaddr_bits);
+}
+
+static __always_inline u64 __is_canonical_address(u64 vaddr, u8 vaddr_bits)
+{
+	return __canonical_address(vaddr, vaddr_bits) == vaddr;
+}
+
 #endif	/* __ASSEMBLY__ */
 
 #include <asm-generic/memory_model.h>
diff --git a/arch/x86/include/asm/paravirt_api_clock.h b/arch/x86/include/asm/paravirt_api_clock.h
new file mode 100644
index 000000000000..65ac7cee0dad
--- /dev/null
+++ b/arch/x86/include/asm/paravirt_api_clock.h
@@ -0,0 +1 @@
+#include <asm/paravirt.h>
diff --git a/arch/x86/include/asm/paravirt_types.h b/arch/x86/include/asm/paravirt_types.h
index a69012e1903f..e1591467668e 100644
--- a/arch/x86/include/asm/paravirt_types.h
+++ b/arch/x86/include/asm/paravirt_types.h
@@ -279,7 +279,7 @@ extern void (*paravirt_iret)(void);
 
 #define paravirt_type(op)				\
 	[paravirt_typenum] "i" (PARAVIRT_PATCH(op)),	\
-	[paravirt_opptr] "i" (&(pv_ops.op))
+	[paravirt_opptr] "m" (pv_ops.op)
 #define paravirt_clobber(clobber)		\
 	[paravirt_clobber] "i" (clobber)
 
@@ -316,7 +316,7 @@ int paravirt_disable_iospace(void);
  */
 #define PARAVIRT_CALL					\
 	ANNOTATE_RETPOLINE_SAFE				\
-	"call *%c[paravirt_opptr];"
+	"call *%[paravirt_opptr];"
 
 /*
  * These macros are intended to wrap calls through one of the paravirt
diff --git a/arch/x86/include/asm/perf_event.h b/arch/x86/include/asm/perf_event.h
index 8fc1b5003713..58d9e4b1fa0a 100644
--- a/arch/x86/include/asm/perf_event.h
+++ b/arch/x86/include/asm/perf_event.h
@@ -7,7 +7,7 @@
  */
 
 #define INTEL_PMC_MAX_GENERIC				       32
-#define INTEL_PMC_MAX_FIXED					4
+#define INTEL_PMC_MAX_FIXED				       16
 #define INTEL_PMC_IDX_FIXED				       32
 
 #define X86_PMC_IDX_MAX					       64
diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 8a9432fb3802..62ab07e24aef 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -15,17 +15,12 @@
 		     cachemode2protval(_PAGE_CACHE_MODE_UC_MINUS)))	\
 	 : (prot))
 
-/*
- * Macros to add or remove encryption attribute
- */
-#define pgprot_encrypted(prot)	__pgprot(__sme_set(pgprot_val(prot)))
-#define pgprot_decrypted(prot)	__pgprot(__sme_clr(pgprot_val(prot)))
-
 #ifndef __ASSEMBLY__
 #include <linux/spinlock.h>
 #include <asm/x86_init.h>
 #include <asm/pkru.h>
 #include <asm/fpu/api.h>
+#include <asm/coco.h>
 #include <asm-generic/pgtable_uffd.h>
 #include <linux/page_table_check.h>
 
@@ -38,6 +33,12 @@ void ptdump_walk_pgd_level_debugfs(struct seq_file *m, struct mm_struct *mm,
 void ptdump_walk_pgd_level_checkwx(void);
 void ptdump_walk_user_pgd_level_checkwx(void);
 
+/*
+ * Macros to add or remove encryption attribute
+ */
+#define pgprot_encrypted(prot)	__pgprot(cc_mkenc(pgprot_val(prot)))
+#define pgprot_decrypted(prot)	__pgprot(cc_mkdec(pgprot_val(prot)))
+
 #ifdef CONFIG_DEBUG_WX
 #define debug_checkwx()		ptdump_walk_pgd_level_checkwx()
 #define debug_checkwx_user()	ptdump_walk_user_pgd_level_checkwx()
diff --git a/arch/x86/include/asm/preempt.h b/arch/x86/include/asm/preempt.h
index fe5efbcba824..5f6daea1ee24 100644
--- a/arch/x86/include/asm/preempt.h
+++ b/arch/x86/include/asm/preempt.h
@@ -108,16 +108,18 @@ static __always_inline bool should_resched(int preempt_offset)
 extern asmlinkage void preempt_schedule(void);
 extern asmlinkage void preempt_schedule_thunk(void);
 
-#define __preempt_schedule_func preempt_schedule_thunk
+#define preempt_schedule_dynamic_enabled	preempt_schedule_thunk
+#define preempt_schedule_dynamic_disabled	NULL
 
 extern asmlinkage void preempt_schedule_notrace(void);
 extern asmlinkage void preempt_schedule_notrace_thunk(void);
 
-#define __preempt_schedule_notrace_func preempt_schedule_notrace_thunk
+#define preempt_schedule_notrace_dynamic_enabled	preempt_schedule_notrace_thunk
+#define preempt_schedule_notrace_dynamic_disabled	NULL
 
 #ifdef CONFIG_PREEMPT_DYNAMIC
 
-DECLARE_STATIC_CALL(preempt_schedule, __preempt_schedule_func);
+DECLARE_STATIC_CALL(preempt_schedule, preempt_schedule_dynamic_enabled);
 
 #define __preempt_schedule() \
 do { \
@@ -125,7 +127,7 @@ do { \
 	asm volatile ("call " STATIC_CALL_TRAMP_STR(preempt_schedule) : ASM_CALL_CONSTRAINT); \
 } while (0)
 
-DECLARE_STATIC_CALL(preempt_schedule_notrace, __preempt_schedule_notrace_func);
+DECLARE_STATIC_CALL(preempt_schedule_notrace, preempt_schedule_notrace_dynamic_enabled);
 
 #define __preempt_schedule_notrace() \
 do { \
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index 2c5f12ae7d04..a87e7c33d5ac 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -119,6 +119,8 @@ struct cpuinfo_x86 {
 	int			x86_cache_mbm_width_offset;
 	int			x86_power;
 	unsigned long		loops_per_jiffy;
+	/* protected processor identification number */
+	u64			ppin;
 	/* cpuid returned max cores value: */
 	u16			x86_max_cores;
 	u16			apicid;
diff --git a/arch/x86/include/asm/ptrace.h b/arch/x86/include/asm/ptrace.h
index 703663175a5a..4357e0f2cd5f 100644
--- a/arch/x86/include/asm/ptrace.h
+++ b/arch/x86/include/asm/ptrace.h
@@ -137,7 +137,7 @@ static __always_inline int user_mode(struct pt_regs *regs)
 #endif
 }
 
-static inline int v8086_mode(struct pt_regs *regs)
+static __always_inline int v8086_mode(struct pt_regs *regs)
 {
 #ifdef CONFIG_X86_32
 	return (regs->flags & X86_VM_MASK);
diff --git a/arch/x86/include/asm/set_memory.h b/arch/x86/include/asm/set_memory.h
index ff0f2d90338a..78ca53512486 100644
--- a/arch/x86/include/asm/set_memory.h
+++ b/arch/x86/include/asm/set_memory.h
@@ -53,7 +53,6 @@ int set_memory_global(unsigned long addr, int numpages);
 
 int set_pages_array_uc(struct page **pages, int addrinarray);
 int set_pages_array_wc(struct page **pages, int addrinarray);
-int set_pages_array_wt(struct page **pages, int addrinarray);
 int set_pages_array_wb(struct page **pages, int addrinarray);
 
 /*
@@ -84,7 +83,6 @@ int set_pages_rw(struct page *page, int numpages);
 int set_direct_map_invalid_noflush(struct page *page);
 int set_direct_map_default_noflush(struct page *page);
 bool kernel_page_present(struct page *page);
-void notify_range_enc_status_changed(unsigned long vaddr, int npages, bool enc);
 
 extern int kernel_set_to_readonly;
 
diff --git a/arch/x86/include/asm/svm.h b/arch/x86/include/asm/svm.h
index b00dbc5fac2b..bb2fb78523ce 100644
--- a/arch/x86/include/asm/svm.h
+++ b/arch/x86/include/asm/svm.h
@@ -220,6 +220,42 @@ struct __attribute__ ((__packed__)) vmcb_control_area {
 #define SVM_NESTED_CTL_SEV_ENABLE	BIT(1)
 #define SVM_NESTED_CTL_SEV_ES_ENABLE	BIT(2)
 
+
+/* AVIC */
+#define AVIC_LOGICAL_ID_ENTRY_GUEST_PHYSICAL_ID_MASK	(0xFF)
+#define AVIC_LOGICAL_ID_ENTRY_VALID_BIT			31
+#define AVIC_LOGICAL_ID_ENTRY_VALID_MASK		(1 << 31)
+
+#define AVIC_PHYSICAL_ID_ENTRY_HOST_PHYSICAL_ID_MASK	(0xFFULL)
+#define AVIC_PHYSICAL_ID_ENTRY_BACKING_PAGE_MASK	(0xFFFFFFFFFFULL << 12)
+#define AVIC_PHYSICAL_ID_ENTRY_IS_RUNNING_MASK		(1ULL << 62)
+#define AVIC_PHYSICAL_ID_ENTRY_VALID_MASK		(1ULL << 63)
+#define AVIC_PHYSICAL_ID_TABLE_SIZE_MASK		(0xFF)
+
+#define AVIC_DOORBELL_PHYSICAL_ID_MASK			(0xFF)
+
+#define AVIC_UNACCEL_ACCESS_WRITE_MASK		1
+#define AVIC_UNACCEL_ACCESS_OFFSET_MASK		0xFF0
+#define AVIC_UNACCEL_ACCESS_VECTOR_MASK		0xFFFFFFFF
+
+enum avic_ipi_failure_cause {
+	AVIC_IPI_FAILURE_INVALID_INT_TYPE,
+	AVIC_IPI_FAILURE_TARGET_NOT_RUNNING,
+	AVIC_IPI_FAILURE_INVALID_TARGET,
+	AVIC_IPI_FAILURE_INVALID_BACKING_PAGE,
+};
+
+
+/*
+ * 0xff is broadcast, so the max index allowed for physical APIC ID
+ * table is 0xfe.  APIC IDs above 0xff are reserved.
+ */
+#define AVIC_MAX_PHYSICAL_ID_COUNT	0xff
+
+#define AVIC_HPA_MASK	~((0xFFFULL << 52) | 0xFFF)
+#define VMCB_AVIC_APIC_BAR_MASK		0xFFFFFFFFFF000ULL
+
+
 struct vmcb_seg {
 	u16 selector;
 	u16 attrib;
diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h
index 2f0b6be8eaab..9619385bf749 100644
--- a/arch/x86/include/asm/topology.h
+++ b/arch/x86/include/asm/topology.h
@@ -110,6 +110,7 @@ extern const struct cpumask *cpu_clustergroup_mask(int cpu);
 #define topology_logical_die_id(cpu)		(cpu_data(cpu).logical_die_id)
 #define topology_die_id(cpu)			(cpu_data(cpu).cpu_die_id)
 #define topology_core_id(cpu)			(cpu_data(cpu).cpu_core_id)
+#define topology_ppin(cpu)			(cpu_data(cpu).ppin)
 
 extern unsigned int __max_die_per_package;
 
@@ -215,15 +216,26 @@ extern void arch_scale_freq_tick(void);
 #define arch_scale_freq_tick arch_scale_freq_tick
 
 extern void arch_set_max_freq_ratio(bool turbo_disabled);
+void init_freq_invariance(bool secondary, bool cppc_ready);
 #else
 static inline void arch_set_max_freq_ratio(bool turbo_disabled)
 {
 }
+static inline void init_freq_invariance(bool secondary, bool cppc_ready)
+{
+}
 #endif
 
-#if defined(CONFIG_ACPI_CPPC_LIB) && defined(CONFIG_SMP)
+#ifdef CONFIG_ACPI_CPPC_LIB
 void init_freq_invariance_cppc(void);
-#define init_freq_invariance_cppc init_freq_invariance_cppc
+#define arch_init_invariance_cppc init_freq_invariance_cppc
+
+bool amd_set_max_freq_ratio(u64 *ratio);
+#else
+static inline bool amd_set_max_freq_ratio(u64 *ratio)
+{
+	return false;
+}
 #endif
 
 #endif /* _ASM_X86_TOPOLOGY_H */
diff --git a/arch/x86/include/asm/uaccess.h b/arch/x86/include/asm/uaccess.h
index ac96f9b2d64b..f78e2b3501a1 100644
--- a/arch/x86/include/asm/uaccess.h
+++ b/arch/x86/include/asm/uaccess.h
@@ -12,35 +12,6 @@
 #include <asm/smap.h>
 #include <asm/extable.h>
 
-/*
- * Test whether a block of memory is a valid user space address.
- * Returns 0 if the range is valid, nonzero otherwise.
- */
-static inline bool __chk_range_not_ok(unsigned long addr, unsigned long size, unsigned long limit)
-{
-	/*
-	 * If we have used "sizeof()" for the size,
-	 * we know it won't overflow the limit (but
-	 * it might overflow the 'addr', so it's
-	 * important to subtract the size from the
-	 * limit, not add it to the address).
-	 */
-	if (__builtin_constant_p(size))
-		return unlikely(addr > limit - size);
-
-	/* Arbitrary sizes? Be careful about overflow */
-	addr += size;
-	if (unlikely(addr < size))
-		return true;
-	return unlikely(addr > limit);
-}
-
-#define __range_not_ok(addr, size, limit)				\
-({									\
-	__chk_user_ptr(addr);						\
-	__chk_range_not_ok((unsigned long __force)(addr), size, limit); \
-})
-
 #ifdef CONFIG_DEBUG_ATOMIC_SLEEP
 static inline bool pagefault_disabled(void);
 # define WARN_ON_IN_IRQ()	\
@@ -69,9 +40,11 @@ static inline bool pagefault_disabled(void);
 #define access_ok(addr, size)					\
 ({									\
 	WARN_ON_IN_IRQ();						\
-	likely(!__range_not_ok(addr, size, TASK_SIZE_MAX));		\
+	likely(__access_ok(addr, size));				\
 })
 
+#include <asm-generic/access_ok.h>
+
 extern int __get_user_1(void);
 extern int __get_user_2(void);
 extern int __get_user_4(void);
@@ -524,8 +497,6 @@ do {									\
 	unsafe_copy_loop(__ucu_dst, __ucu_src, __ucu_len, u8, label);	\
 } while (0)
 
-#define HAVE_GET_KERNEL_NOFAULT
-
 #ifdef CONFIG_CC_HAS_ASM_GOTO_OUTPUT
 #define __get_kernel_nofault(dst, src, type, err_label)			\
 	__get_user_size(*((type *)(dst)), (__force type __user *)(src),	\
diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h
index 22b7412c08f6..e9170457697e 100644
--- a/arch/x86/include/asm/x86_init.h
+++ b/arch/x86/include/asm/x86_init.h
@@ -142,6 +142,21 @@ struct x86_init_acpi {
 };
 
 /**
+ * struct x86_guest - Functions used by misc guest incarnations like SEV, TDX, etc.
+ *
+ * @enc_status_change_prepare	Notify HV before the encryption status of a range is changed
+ * @enc_status_change_finish	Notify HV after the encryption status of a range is changed
+ * @enc_tlb_flush_required	Returns true if a TLB flush is needed before changing page encryption status
+ * @enc_cache_flush_required	Returns true if a cache flush is needed before changing page encryption status
+ */
+struct x86_guest {
+	void (*enc_status_change_prepare)(unsigned long vaddr, int npages, bool enc);
+	bool (*enc_status_change_finish)(unsigned long vaddr, int npages, bool enc);
+	bool (*enc_tlb_flush_required)(bool enc);
+	bool (*enc_cache_flush_required)(void);
+};
+
+/**
  * struct x86_init_ops - functions for platform specific setup
  *
  */
@@ -287,6 +302,7 @@ struct x86_platform_ops {
 	struct x86_legacy_features legacy;
 	void (*set_legacy_features)(void);
 	struct x86_hyper_runtime hyper;
+	struct x86_guest guest;
 };
 
 struct x86_apic_ops {
diff --git a/arch/x86/include/asm/xen/cpuid.h b/arch/x86/include/asm/xen/cpuid.h
index a9630104f1c4..78e667a31d6c 100644
--- a/arch/x86/include/asm/xen/cpuid.h
+++ b/arch/x86/include/asm/xen/cpuid.h
@@ -100,6 +100,13 @@
 /* Memory mapped from other domains has valid IOMMU entries */
 #define XEN_HVM_CPUID_IOMMU_MAPPINGS   (1u << 2)
 #define XEN_HVM_CPUID_VCPU_ID_PRESENT  (1u << 3) /* vcpu id is present in EBX */
+#define XEN_HVM_CPUID_DOMID_PRESENT    (1u << 4) /* domid is present in ECX */
+/*
+ * Bits 55:49 from the IO-APIC RTE and bits 11:5 from the MSI address can be
+ * used to store high bits for the Destination ID. This expands the Destination
+ * ID field from 8 to 15 bits, allowing to target APIC IDs up 32768.
+ */
+#define XEN_HVM_CPUID_EXT_DEST_ID      (1u << 5)
 
 /*
  * Leaf 6 (0x40000x05)
diff --git a/arch/x86/include/asm/xen/hypervisor.h b/arch/x86/include/asm/xen/hypervisor.h
index 1bf2ad34188a..16f548a661cf 100644
--- a/arch/x86/include/asm/xen/hypervisor.h
+++ b/arch/x86/include/asm/xen/hypervisor.h
@@ -43,20 +43,6 @@ static inline uint32_t xen_cpuid_base(void)
 	return hypervisor_cpuid_base("XenVMMXenVMM", 2);
 }
 
-#ifdef CONFIG_XEN
-extern bool __init xen_hvm_need_lapic(void);
-
-static inline bool __init xen_x2apic_para_available(void)
-{
-	return xen_hvm_need_lapic();
-}
-#else
-static inline bool __init xen_x2apic_para_available(void)
-{
-	return (xen_cpuid_base() != 0);
-}
-#endif
-
 struct pci_dev;
 
 #ifdef CONFIG_XEN_PV_DOM0
diff --git a/arch/x86/include/asm/xor.h b/arch/x86/include/asm/xor.h
index 2ee95a7769e6..7b0307acc410 100644
--- a/arch/x86/include/asm/xor.h
+++ b/arch/x86/include/asm/xor.h
@@ -57,7 +57,8 @@
 					op(i + 3, 3)
 
 static void
-xor_sse_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
+xor_sse_2(unsigned long bytes, unsigned long * __restrict p1,
+	  const unsigned long * __restrict p2)
 {
 	unsigned long lines = bytes >> 8;
 
@@ -108,7 +109,8 @@ xor_sse_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
 }
 
 static void
-xor_sse_2_pf64(unsigned long bytes, unsigned long *p1, unsigned long *p2)
+xor_sse_2_pf64(unsigned long bytes, unsigned long * __restrict p1,
+	       const unsigned long * __restrict p2)
 {
 	unsigned long lines = bytes >> 8;
 
@@ -142,8 +144,9 @@ xor_sse_2_pf64(unsigned long bytes, unsigned long *p1, unsigned long *p2)
 }
 
 static void
-xor_sse_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-	  unsigned long *p3)
+xor_sse_3(unsigned long bytes, unsigned long * __restrict p1,
+	  const unsigned long * __restrict p2,
+	  const unsigned long * __restrict p3)
 {
 	unsigned long lines = bytes >> 8;
 
@@ -201,8 +204,9 @@ xor_sse_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
 }
 
 static void
-xor_sse_3_pf64(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-	       unsigned long *p3)
+xor_sse_3_pf64(unsigned long bytes, unsigned long * __restrict p1,
+	       const unsigned long * __restrict p2,
+	       const unsigned long * __restrict p3)
 {
 	unsigned long lines = bytes >> 8;
 
@@ -238,8 +242,10 @@ xor_sse_3_pf64(unsigned long bytes, unsigned long *p1, unsigned long *p2,
 }
 
 static void
-xor_sse_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-	  unsigned long *p3, unsigned long *p4)
+xor_sse_4(unsigned long bytes, unsigned long * __restrict p1,
+	  const unsigned long * __restrict p2,
+	  const unsigned long * __restrict p3,
+	  const unsigned long * __restrict p4)
 {
 	unsigned long lines = bytes >> 8;
 
@@ -304,8 +310,10 @@ xor_sse_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
 }
 
 static void
-xor_sse_4_pf64(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-	       unsigned long *p3, unsigned long *p4)
+xor_sse_4_pf64(unsigned long bytes, unsigned long * __restrict p1,
+	       const unsigned long * __restrict p2,
+	       const unsigned long * __restrict p3,
+	       const unsigned long * __restrict p4)
 {
 	unsigned long lines = bytes >> 8;
 
@@ -343,8 +351,11 @@ xor_sse_4_pf64(unsigned long bytes, unsigned long *p1, unsigned long *p2,
 }
 
 static void
-xor_sse_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-	  unsigned long *p3, unsigned long *p4, unsigned long *p5)
+xor_sse_5(unsigned long bytes, unsigned long * __restrict p1,
+	  const unsigned long * __restrict p2,
+	  const unsigned long * __restrict p3,
+	  const unsigned long * __restrict p4,
+	  const unsigned long * __restrict p5)
 {
 	unsigned long lines = bytes >> 8;
 
@@ -416,8 +427,11 @@ xor_sse_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
 }
 
 static void
-xor_sse_5_pf64(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-	       unsigned long *p3, unsigned long *p4, unsigned long *p5)
+xor_sse_5_pf64(unsigned long bytes, unsigned long * __restrict p1,
+	       const unsigned long * __restrict p2,
+	       const unsigned long * __restrict p3,
+	       const unsigned long * __restrict p4,
+	       const unsigned long * __restrict p5)
 {
 	unsigned long lines = bytes >> 8;
 
diff --git a/arch/x86/include/asm/xor_32.h b/arch/x86/include/asm/xor_32.h
index 67ceb790e639..7a6b9474591e 100644
--- a/arch/x86/include/asm/xor_32.h
+++ b/arch/x86/include/asm/xor_32.h
@@ -21,7 +21,8 @@
 #include <asm/fpu/api.h>
 
 static void
-xor_pII_mmx_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
+xor_pII_mmx_2(unsigned long bytes, unsigned long * __restrict p1,
+	      const unsigned long * __restrict p2)
 {
 	unsigned long lines = bytes >> 7;
 
@@ -64,8 +65,9 @@ xor_pII_mmx_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
 }
 
 static void
-xor_pII_mmx_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-	      unsigned long *p3)
+xor_pII_mmx_3(unsigned long bytes, unsigned long * __restrict p1,
+	      const unsigned long * __restrict p2,
+	      const unsigned long * __restrict p3)
 {
 	unsigned long lines = bytes >> 7;
 
@@ -113,8 +115,10 @@ xor_pII_mmx_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
 }
 
 static void
-xor_pII_mmx_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-	      unsigned long *p3, unsigned long *p4)
+xor_pII_mmx_4(unsigned long bytes, unsigned long * __restrict p1,
+	      const unsigned long * __restrict p2,
+	      const unsigned long * __restrict p3,
+	      const unsigned long * __restrict p4)
 {
 	unsigned long lines = bytes >> 7;
 
@@ -168,8 +172,11 @@ xor_pII_mmx_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
 
 
 static void
-xor_pII_mmx_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-	      unsigned long *p3, unsigned long *p4, unsigned long *p5)
+xor_pII_mmx_5(unsigned long bytes, unsigned long * __restrict p1,
+	      const unsigned long * __restrict p2,
+	      const unsigned long * __restrict p3,
+	      const unsigned long * __restrict p4,
+	      const unsigned long * __restrict p5)
 {
 	unsigned long lines = bytes >> 7;
 
@@ -248,7 +255,8 @@ xor_pII_mmx_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
 #undef BLOCK
 
 static void
-xor_p5_mmx_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
+xor_p5_mmx_2(unsigned long bytes, unsigned long * __restrict p1,
+	     const unsigned long * __restrict p2)
 {
 	unsigned long lines = bytes >> 6;
 
@@ -295,8 +303,9 @@ xor_p5_mmx_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
 }
 
 static void
-xor_p5_mmx_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-	     unsigned long *p3)
+xor_p5_mmx_3(unsigned long bytes, unsigned long * __restrict p1,
+	     const unsigned long * __restrict p2,
+	     const unsigned long * __restrict p3)
 {
 	unsigned long lines = bytes >> 6;
 
@@ -352,8 +361,10 @@ xor_p5_mmx_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
 }
 
 static void
-xor_p5_mmx_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-	     unsigned long *p3, unsigned long *p4)
+xor_p5_mmx_4(unsigned long bytes, unsigned long * __restrict p1,
+	     const unsigned long * __restrict p2,
+	     const unsigned long * __restrict p3,
+	     const unsigned long * __restrict p4)
 {
 	unsigned long lines = bytes >> 6;
 
@@ -418,8 +429,11 @@ xor_p5_mmx_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
 }
 
 static void
-xor_p5_mmx_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
-	     unsigned long *p3, unsigned long *p4, unsigned long *p5)
+xor_p5_mmx_5(unsigned long bytes, unsigned long * __restrict p1,
+	     const unsigned long * __restrict p2,
+	     const unsigned long * __restrict p3,
+	     const unsigned long * __restrict p4,
+	     const unsigned long * __restrict p5)
 {
 	unsigned long lines = bytes >> 6;
 
diff --git a/arch/x86/include/asm/xor_avx.h b/arch/x86/include/asm/xor_avx.h
index 0c4e5b5e3852..7f81dd5897f4 100644
--- a/arch/x86/include/asm/xor_avx.h
+++ b/arch/x86/include/asm/xor_avx.h
@@ -26,7 +26,8 @@
 		BLOCK4(8) \
 		BLOCK4(12)
 
-static void xor_avx_2(unsigned long bytes, unsigned long *p0, unsigned long *p1)
+static void xor_avx_2(unsigned long bytes, unsigned long * __restrict p0,
+		      const unsigned long * __restrict p1)
 {
 	unsigned long lines = bytes >> 9;
 
@@ -52,8 +53,9 @@ do { \
 	kernel_fpu_end();
 }
 
-static void xor_avx_3(unsigned long bytes, unsigned long *p0, unsigned long *p1,
-	unsigned long *p2)
+static void xor_avx_3(unsigned long bytes, unsigned long * __restrict p0,
+		      const unsigned long * __restrict p1,
+		      const unsigned long * __restrict p2)
 {
 	unsigned long lines = bytes >> 9;
 
@@ -82,8 +84,10 @@ do { \
 	kernel_fpu_end();
 }
 
-static void xor_avx_4(unsigned long bytes, unsigned long *p0, unsigned long *p1,
-	unsigned long *p2, unsigned long *p3)
+static void xor_avx_4(unsigned long bytes, unsigned long * __restrict p0,
+		      const unsigned long * __restrict p1,
+		      const unsigned long * __restrict p2,
+		      const unsigned long * __restrict p3)
 {
 	unsigned long lines = bytes >> 9;
 
@@ -115,8 +119,11 @@ do { \
 	kernel_fpu_end();
 }
 
-static void xor_avx_5(unsigned long bytes, unsigned long *p0, unsigned long *p1,
-	unsigned long *p2, unsigned long *p3, unsigned long *p4)
+static void xor_avx_5(unsigned long bytes, unsigned long * __restrict p0,
+	     const unsigned long * __restrict p1,
+	     const unsigned long * __restrict p2,
+	     const unsigned long * __restrict p3,
+	     const unsigned long * __restrict p4)
 {
 	unsigned long lines = bytes >> 9;
 
diff --git a/arch/x86/include/uapi/asm/shmbuf.h b/arch/x86/include/uapi/asm/shmbuf.h
index fce18eaa070c..13775bfdfee2 100644
--- a/arch/x86/include/uapi/asm/shmbuf.h
+++ b/arch/x86/include/uapi/asm/shmbuf.h
@@ -5,6 +5,10 @@
 #if !defined(__x86_64__) || !defined(__ILP32__)
 #include <asm-generic/shmbuf.h>
 #else
+
+#include <asm/ipcbuf.h>
+#include <asm/posix_types.h>
+
 /*
  * The shmid64_ds structure for x86 architecture with x32 ABI.
  *
@@ -15,7 +19,7 @@
 
 struct shmid64_ds {
 	struct ipc64_perm	shm_perm;	/* operation perms */
-	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_size_t		shm_segsz;	/* size of segment (bytes) */
 	__kernel_long_t		shm_atime;	/* last attach time */
 	__kernel_long_t		shm_dtime;	/* last detach time */
 	__kernel_long_t		shm_ctime;	/* last change time */
diff --git a/arch/x86/include/uapi/asm/signal.h b/arch/x86/include/uapi/asm/signal.h
index 164a22a72984..777c3a0f4e23 100644
--- a/arch/x86/include/uapi/asm/signal.h
+++ b/arch/x86/include/uapi/asm/signal.h
@@ -104,7 +104,7 @@ struct sigaction {
 typedef struct sigaltstack {
 	void __user *ss_sp;
 	int ss_flags;
-	size_t ss_size;
+	__kernel_size_t ss_size;
 } stack_t;
 
 #endif /* __ASSEMBLY__ */
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 6aef9ee28a39..6462e3dd98f4 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -21,7 +21,6 @@ CFLAGS_REMOVE_ftrace.o = -pg
 CFLAGS_REMOVE_early_printk.o = -pg
 CFLAGS_REMOVE_head64.o = -pg
 CFLAGS_REMOVE_sev.o = -pg
-CFLAGS_REMOVE_cc_platform.o = -pg
 endif
 
 KASAN_SANITIZE_head$(BITS).o				:= n
@@ -30,7 +29,6 @@ KASAN_SANITIZE_dumpstack_$(BITS).o			:= n
 KASAN_SANITIZE_stacktrace.o				:= n
 KASAN_SANITIZE_paravirt.o				:= n
 KASAN_SANITIZE_sev.o					:= n
-KASAN_SANITIZE_cc_platform.o				:= n
 
 # With some compiler versions the generated code results in boot hangs, caused
 # by several compilation units. To be safe, disable all instrumentation.
@@ -49,7 +47,6 @@ endif
 KCOV_INSTRUMENT		:= n
 
 CFLAGS_head$(BITS).o	+= -fno-stack-protector
-CFLAGS_cc_platform.o	+= -fno-stack-protector
 
 CFLAGS_irq.o := -I $(srctree)/$(src)/../include/asm/trace
 
@@ -151,8 +148,6 @@ obj-$(CONFIG_UNWINDER_GUESS)		+= unwind_guess.o
 
 obj-$(CONFIG_AMD_MEM_ENCRYPT)		+= sev.o
 
-obj-$(CONFIG_ARCH_HAS_CC_PLATFORM)	+= cc_platform.o
-
 ###
 # 64 bit specific files
 ifeq ($(CONFIG_X86_64),y)
diff --git a/arch/x86/kernel/acpi/Makefile b/arch/x86/kernel/acpi/Makefile
index cf340d85946a..fc17b3f136fe 100644
--- a/arch/x86/kernel/acpi/Makefile
+++ b/arch/x86/kernel/acpi/Makefile
@@ -3,7 +3,7 @@
 obj-$(CONFIG_ACPI)		+= boot.o
 obj-$(CONFIG_ACPI_SLEEP)	+= sleep.o wakeup_$(BITS).o
 obj-$(CONFIG_ACPI_APEI)		+= apei.o
-obj-$(CONFIG_ACPI_CPPC_LIB)	+= cppc_msr.o
+obj-$(CONFIG_ACPI_CPPC_LIB)	+= cppc.o
 
 ifneq ($(CONFIG_ACPI_PROCESSOR),)
 obj-y				+= cstate.o
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 5b6d1a95776f..0d01e7f5078c 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -1328,6 +1328,17 @@ static int __init disable_acpi_pci(const struct dmi_system_id *d)
 	return 0;
 }
 
+static int __init disable_acpi_xsdt(const struct dmi_system_id *d)
+{
+	if (!acpi_force) {
+		pr_notice("%s detected: force use of acpi=rsdt\n", d->ident);
+		acpi_gbl_do_not_use_xsdt = TRUE;
+	} else {
+		pr_notice("Warning: DMI blacklist says broken, but acpi XSDT forced\n");
+	}
+	return 0;
+}
+
 static int __init dmi_disable_acpi(const struct dmi_system_id *d)
 {
 	if (!acpi_force) {
@@ -1451,6 +1462,19 @@ static const struct dmi_system_id acpi_dmi_table[] __initconst = {
 		     DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 360"),
 		     },
 	 },
+	/*
+	 * Boxes that need ACPI XSDT use disabled due to corrupted tables
+	 */
+	{
+	 .callback = disable_acpi_xsdt,
+	 .ident = "Advantech DAC-BJ01",
+	 .matches = {
+		     DMI_MATCH(DMI_SYS_VENDOR, "NEC"),
+		     DMI_MATCH(DMI_PRODUCT_NAME, "Bearlake CRB Board"),
+		     DMI_MATCH(DMI_BIOS_VERSION, "V1.12"),
+		     DMI_MATCH(DMI_BIOS_DATE, "02/01/2011"),
+		     },
+	 },
 	{}
 };
 
diff --git a/arch/x86/kernel/acpi/cppc.c b/arch/x86/kernel/acpi/cppc.c
new file mode 100644
index 000000000000..df1644d9b3b6
--- /dev/null
+++ b/arch/x86/kernel/acpi/cppc.c
@@ -0,0 +1,103 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * cppc.c: CPPC Interface for x86
+ * Copyright (c) 2016, Intel Corporation.
+ */
+
+#include <acpi/cppc_acpi.h>
+#include <asm/msr.h>
+#include <asm/processor.h>
+#include <asm/topology.h>
+
+/* Refer to drivers/acpi/cppc_acpi.c for the description of functions */
+
+bool cpc_ffh_supported(void)
+{
+	return true;
+}
+
+int cpc_read_ffh(int cpunum, struct cpc_reg *reg, u64 *val)
+{
+	int err;
+
+	err = rdmsrl_safe_on_cpu(cpunum, reg->address, val);
+	if (!err) {
+		u64 mask = GENMASK_ULL(reg->bit_offset + reg->bit_width - 1,
+				       reg->bit_offset);
+
+		*val &= mask;
+		*val >>= reg->bit_offset;
+	}
+	return err;
+}
+
+int cpc_write_ffh(int cpunum, struct cpc_reg *reg, u64 val)
+{
+	u64 rd_val;
+	int err;
+
+	err = rdmsrl_safe_on_cpu(cpunum, reg->address, &rd_val);
+	if (!err) {
+		u64 mask = GENMASK_ULL(reg->bit_offset + reg->bit_width - 1,
+				       reg->bit_offset);
+
+		val <<= reg->bit_offset;
+		val &= mask;
+		rd_val &= ~mask;
+		rd_val |= val;
+		err = wrmsrl_safe_on_cpu(cpunum, reg->address, rd_val);
+	}
+	return err;
+}
+
+bool amd_set_max_freq_ratio(u64 *ratio)
+{
+	struct cppc_perf_caps perf_caps;
+	u64 highest_perf, nominal_perf;
+	u64 perf_ratio;
+	int rc;
+
+	if (!ratio)
+		return false;
+
+	rc = cppc_get_perf_caps(0, &perf_caps);
+	if (rc) {
+		pr_debug("Could not retrieve perf counters (%d)\n", rc);
+		return false;
+	}
+
+	highest_perf = amd_get_highest_perf();
+	nominal_perf = perf_caps.nominal_perf;
+
+	if (!highest_perf || !nominal_perf) {
+		pr_debug("Could not retrieve highest or nominal performance\n");
+		return false;
+	}
+
+	perf_ratio = div_u64(highest_perf * SCHED_CAPACITY_SCALE, nominal_perf);
+	/* midpoint between max_boost and max_P */
+	perf_ratio = (perf_ratio + SCHED_CAPACITY_SCALE) >> 1;
+	if (!perf_ratio) {
+		pr_debug("Non-zero highest/nominal perf values led to a 0 ratio\n");
+		return false;
+	}
+
+	*ratio = perf_ratio;
+	arch_set_max_freq_ratio(false);
+
+	return true;
+}
+
+static DEFINE_MUTEX(freq_invariance_lock);
+
+void init_freq_invariance_cppc(void)
+{
+	static bool secondary;
+
+	mutex_lock(&freq_invariance_lock);
+
+	init_freq_invariance(secondary, true);
+	secondary = true;
+
+	mutex_unlock(&freq_invariance_lock);
+}
diff --git a/arch/x86/kernel/acpi/cppc_msr.c b/arch/x86/kernel/acpi/cppc_msr.c
deleted file mode 100644
index b961de569e7e..000000000000
--- a/arch/x86/kernel/acpi/cppc_msr.c
+++ /dev/null
@@ -1,49 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * cppc_msr.c:  MSR Interface for CPPC
- * Copyright (c) 2016, Intel Corporation.
- */
-
-#include <acpi/cppc_acpi.h>
-#include <asm/msr.h>
-
-/* Refer to drivers/acpi/cppc_acpi.c for the description of functions */
-
-bool cpc_ffh_supported(void)
-{
-	return true;
-}
-
-int cpc_read_ffh(int cpunum, struct cpc_reg *reg, u64 *val)
-{
-	int err;
-
-	err = rdmsrl_safe_on_cpu(cpunum, reg->address, val);
-	if (!err) {
-		u64 mask = GENMASK_ULL(reg->bit_offset + reg->bit_width - 1,
-				       reg->bit_offset);
-
-		*val &= mask;
-		*val >>= reg->bit_offset;
-	}
-	return err;
-}
-
-int cpc_write_ffh(int cpunum, struct cpc_reg *reg, u64 val)
-{
-	u64 rd_val;
-	int err;
-
-	err = rdmsrl_safe_on_cpu(cpunum, reg->address, &rd_val);
-	if (!err) {
-		u64 mask = GENMASK_ULL(reg->bit_offset + reg->bit_width - 1,
-				       reg->bit_offset);
-
-		val <<= reg->bit_offset;
-		val &= mask;
-		rd_val &= ~mask;
-		rd_val |= val;
-		err = wrmsrl_safe_on_cpu(cpunum, reg->address, rd_val);
-	}
-	return err;
-}
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index 1e97f944b47d..3b7f4cdbf2e0 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -15,6 +15,7 @@
 #include <asm/desc.h>
 #include <asm/cacheflush.h>
 #include <asm/realmode.h>
+#include <asm/hypervisor.h>
 
 #include <linux/ftrace.h>
 #include "../../realmode/rm/wakeup.h"
@@ -140,9 +141,9 @@ static int __init acpi_sleep_setup(char *str)
 			acpi_realmode_flags |= 4;
 #ifdef CONFIG_HIBERNATION
 		if (strncmp(str, "s4_hwsig", 8) == 0)
-			acpi_check_s4_hw_signature(1);
+			acpi_check_s4_hw_signature = 1;
 		if (strncmp(str, "s4_nohwsig", 10) == 0)
-			acpi_check_s4_hw_signature(0);
+			acpi_check_s4_hw_signature = 0;
 #endif
 		if (strncmp(str, "nonvs", 5) == 0)
 			acpi_nvs_nosave();
@@ -160,3 +161,21 @@ static int __init acpi_sleep_setup(char *str)
 }
 
 __setup("acpi_sleep=", acpi_sleep_setup);
+
+#if defined(CONFIG_HIBERNATION) && defined(CONFIG_HYPERVISOR_GUEST)
+static int __init init_s4_sigcheck(void)
+{
+	/*
+	 * If running on a hypervisor, honour the ACPI specification
+	 * by default and trigger a clean reboot when the hardware
+	 * signature in FACS is changed after hibernation.
+	 */
+	if (acpi_check_s4_hw_signature == -1 &&
+	    !hypervisor_is_type(X86_HYPER_NATIVE))
+		acpi_check_s4_hw_signature = 1;
+
+	return 0;
+}
+/* This must happen before acpi_init() which is a subsys initcall */
+arch_initcall(init_s4_sigcheck);
+#endif
diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c
index 5007c3ffe96f..b4470eabf151 100644
--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -389,7 +389,7 @@ static int emit_indirect(int op, int reg, u8 *bytes)
  *
  *   CALL *%\reg
  *
- * It also tries to inline spectre_v2=retpoline,amd when size permits.
+ * It also tries to inline spectre_v2=retpoline,lfence when size permits.
  */
 static int patch_retpoline(void *addr, struct insn *insn, u8 *bytes)
 {
@@ -407,7 +407,7 @@ static int patch_retpoline(void *addr, struct insn *insn, u8 *bytes)
 	BUG_ON(reg == 4);
 
 	if (cpu_feature_enabled(X86_FEATURE_RETPOLINE) &&
-	    !cpu_feature_enabled(X86_FEATURE_RETPOLINE_AMD))
+	    !cpu_feature_enabled(X86_FEATURE_RETPOLINE_LFENCE))
 		return -1;
 
 	op = insn->opcode.bytes[0];
@@ -438,9 +438,9 @@ static int patch_retpoline(void *addr, struct insn *insn, u8 *bytes)
 	}
 
 	/*
-	 * For RETPOLINE_AMD: prepend the indirect CALL/JMP with an LFENCE.
+	 * For RETPOLINE_LFENCE: prepend the indirect CALL/JMP with an LFENCE.
 	 */
-	if (cpu_feature_enabled(X86_FEATURE_RETPOLINE_AMD)) {
+	if (cpu_feature_enabled(X86_FEATURE_RETPOLINE_LFENCE)) {
 		bytes[i++] = 0x0f;
 		bytes[i++] = 0xae;
 		bytes[i++] = 0xe8; /* LFENCE */
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index 4edb6f0f628c..0c0b09796ced 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -394,35 +394,6 @@ static void amd_detect_cmp(struct cpuinfo_x86 *c)
 	per_cpu(cpu_llc_id, cpu) = c->cpu_die_id = c->phys_proc_id;
 }
 
-static void amd_detect_ppin(struct cpuinfo_x86 *c)
-{
-	unsigned long long val;
-
-	if (!cpu_has(c, X86_FEATURE_AMD_PPIN))
-		return;
-
-	/* When PPIN is defined in CPUID, still need to check PPIN_CTL MSR */
-	if (rdmsrl_safe(MSR_AMD_PPIN_CTL, &val))
-		goto clear_ppin;
-
-	/* PPIN is locked in disabled mode, clear feature bit */
-	if ((val & 3UL) == 1UL)
-		goto clear_ppin;
-
-	/* If PPIN is disabled, try to enable it */
-	if (!(val & 2UL)) {
-		wrmsrl_safe(MSR_AMD_PPIN_CTL,  val | 2UL);
-		rdmsrl_safe(MSR_AMD_PPIN_CTL, &val);
-	}
-
-	/* If PPIN_EN bit is 1, return from here; otherwise fall through */
-	if (val & 2UL)
-		return;
-
-clear_ppin:
-	clear_cpu_cap(c, X86_FEATURE_AMD_PPIN);
-}
-
 u32 amd_get_nodes_per_socket(void)
 {
 	return nodes_per_socket;
@@ -585,6 +556,8 @@ static void early_detect_mem_encrypt(struct cpuinfo_x86 *c)
 	 *	      the SME physical address space reduction value.
 	 *	      If BIOS has not enabled SME then don't advertise the
 	 *	      SME feature (set in scattered.c).
+	 *	      If the kernel has not enabled SME via any means then
+	 *	      don't advertise the SME feature.
 	 *   For SEV: If BIOS has not enabled SEV then don't advertise the
 	 *            SEV and SEV_ES feature (set in scattered.c).
 	 *
@@ -607,6 +580,9 @@ static void early_detect_mem_encrypt(struct cpuinfo_x86 *c)
 		if (IS_ENABLED(CONFIG_X86_32))
 			goto clear_all;
 
+		if (!sme_me_mask)
+			setup_clear_cpu_cap(X86_FEATURE_SME);
+
 		rdmsrl(MSR_K7_HWCR, msr);
 		if (!(msr & MSR_K7_HWCR_SMMLOCK))
 			goto clear_sev;
@@ -947,7 +923,6 @@ static void init_amd(struct cpuinfo_x86 *c)
 	amd_detect_cmp(c);
 	amd_get_topology(c);
 	srat_detect_node(c);
-	amd_detect_ppin(c);
 
 	init_amd_cacheinfo(c);
 
diff --git a/arch/x86/kernel/cpu/aperfmperf.c b/arch/x86/kernel/cpu/aperfmperf.c
index 22911deacb6e..9ca008f9e9b1 100644
--- a/arch/x86/kernel/cpu/aperfmperf.c
+++ b/arch/x86/kernel/cpu/aperfmperf.c
@@ -91,7 +91,7 @@ unsigned int aperfmperf_get_khz(int cpu)
 	if (!boot_cpu_has(X86_FEATURE_APERFMPERF))
 		return 0;
 
-	if (!housekeeping_cpu(cpu, HK_FLAG_MISC))
+	if (!housekeeping_cpu(cpu, HK_TYPE_MISC))
 		return 0;
 
 	if (rcu_is_idle_cpu(cpu))
@@ -114,7 +114,7 @@ void arch_freq_prepare_all(void)
 		return;
 
 	for_each_online_cpu(cpu) {
-		if (!housekeeping_cpu(cpu, HK_FLAG_MISC))
+		if (!housekeeping_cpu(cpu, HK_TYPE_MISC))
 			continue;
 		if (rcu_is_idle_cpu(cpu))
 			continue; /* Idle CPUs are completely uninteresting. */
@@ -136,7 +136,7 @@ unsigned int arch_freq_get_on_cpu(int cpu)
 	if (!boot_cpu_has(X86_FEATURE_APERFMPERF))
 		return 0;
 
-	if (!housekeeping_cpu(cpu, HK_FLAG_MISC))
+	if (!housekeeping_cpu(cpu, HK_TYPE_MISC))
 		return 0;
 
 	if (aperfmperf_snapshot_cpu(cpu, ktime_get(), true))
diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c
index 1c1f218a701d..6296e1ebed1d 100644
--- a/arch/x86/kernel/cpu/bugs.c
+++ b/arch/x86/kernel/cpu/bugs.c
@@ -16,6 +16,7 @@
 #include <linux/prctl.h>
 #include <linux/sched/smt.h>
 #include <linux/pgtable.h>
+#include <linux/bpf.h>
 
 #include <asm/spec-ctrl.h>
 #include <asm/cmdline.h>
@@ -650,6 +651,32 @@ static inline const char *spectre_v2_module_string(void)
 static inline const char *spectre_v2_module_string(void) { return ""; }
 #endif
 
+#define SPECTRE_V2_LFENCE_MSG "WARNING: LFENCE mitigation is not recommended for this CPU, data leaks possible!\n"
+#define SPECTRE_V2_EIBRS_EBPF_MSG "WARNING: Unprivileged eBPF is enabled with eIBRS on, data leaks possible via Spectre v2 BHB attacks!\n"
+#define SPECTRE_V2_EIBRS_LFENCE_EBPF_SMT_MSG "WARNING: Unprivileged eBPF is enabled with eIBRS+LFENCE mitigation and SMT, data leaks possible via Spectre v2 BHB attacks!\n"
+
+#ifdef CONFIG_BPF_SYSCALL
+void unpriv_ebpf_notify(int new_state)
+{
+	if (new_state)
+		return;
+
+	/* Unprivileged eBPF is enabled */
+
+	switch (spectre_v2_enabled) {
+	case SPECTRE_V2_EIBRS:
+		pr_err(SPECTRE_V2_EIBRS_EBPF_MSG);
+		break;
+	case SPECTRE_V2_EIBRS_LFENCE:
+		if (sched_smt_active())
+			pr_err(SPECTRE_V2_EIBRS_LFENCE_EBPF_SMT_MSG);
+		break;
+	default:
+		break;
+	}
+}
+#endif
+
 static inline bool match_option(const char *arg, int arglen, const char *opt)
 {
 	int len = strlen(opt);
@@ -664,7 +691,10 @@ enum spectre_v2_mitigation_cmd {
 	SPECTRE_V2_CMD_FORCE,
 	SPECTRE_V2_CMD_RETPOLINE,
 	SPECTRE_V2_CMD_RETPOLINE_GENERIC,
-	SPECTRE_V2_CMD_RETPOLINE_AMD,
+	SPECTRE_V2_CMD_RETPOLINE_LFENCE,
+	SPECTRE_V2_CMD_EIBRS,
+	SPECTRE_V2_CMD_EIBRS_RETPOLINE,
+	SPECTRE_V2_CMD_EIBRS_LFENCE,
 };
 
 enum spectre_v2_user_cmd {
@@ -737,6 +767,13 @@ spectre_v2_parse_user_cmdline(enum spectre_v2_mitigation_cmd v2_cmd)
 	return SPECTRE_V2_USER_CMD_AUTO;
 }
 
+static inline bool spectre_v2_in_eibrs_mode(enum spectre_v2_mitigation mode)
+{
+	return (mode == SPECTRE_V2_EIBRS ||
+		mode == SPECTRE_V2_EIBRS_RETPOLINE ||
+		mode == SPECTRE_V2_EIBRS_LFENCE);
+}
+
 static void __init
 spectre_v2_user_select_mitigation(enum spectre_v2_mitigation_cmd v2_cmd)
 {
@@ -804,7 +841,7 @@ spectre_v2_user_select_mitigation(enum spectre_v2_mitigation_cmd v2_cmd)
 	 */
 	if (!boot_cpu_has(X86_FEATURE_STIBP) ||
 	    !smt_possible ||
-	    spectre_v2_enabled == SPECTRE_V2_IBRS_ENHANCED)
+	    spectre_v2_in_eibrs_mode(spectre_v2_enabled))
 		return;
 
 	/*
@@ -824,9 +861,11 @@ set_mode:
 
 static const char * const spectre_v2_strings[] = {
 	[SPECTRE_V2_NONE]			= "Vulnerable",
-	[SPECTRE_V2_RETPOLINE_GENERIC]		= "Mitigation: Full generic retpoline",
-	[SPECTRE_V2_RETPOLINE_AMD]		= "Mitigation: Full AMD retpoline",
-	[SPECTRE_V2_IBRS_ENHANCED]		= "Mitigation: Enhanced IBRS",
+	[SPECTRE_V2_RETPOLINE]			= "Mitigation: Retpolines",
+	[SPECTRE_V2_LFENCE]			= "Mitigation: LFENCE",
+	[SPECTRE_V2_EIBRS]			= "Mitigation: Enhanced IBRS",
+	[SPECTRE_V2_EIBRS_LFENCE]		= "Mitigation: Enhanced IBRS + LFENCE",
+	[SPECTRE_V2_EIBRS_RETPOLINE]		= "Mitigation: Enhanced IBRS + Retpolines",
 };
 
 static const struct {
@@ -837,8 +876,12 @@ static const struct {
 	{ "off",		SPECTRE_V2_CMD_NONE,		  false },
 	{ "on",			SPECTRE_V2_CMD_FORCE,		  true  },
 	{ "retpoline",		SPECTRE_V2_CMD_RETPOLINE,	  false },
-	{ "retpoline,amd",	SPECTRE_V2_CMD_RETPOLINE_AMD,	  false },
+	{ "retpoline,amd",	SPECTRE_V2_CMD_RETPOLINE_LFENCE,  false },
+	{ "retpoline,lfence",	SPECTRE_V2_CMD_RETPOLINE_LFENCE,  false },
 	{ "retpoline,generic",	SPECTRE_V2_CMD_RETPOLINE_GENERIC, false },
+	{ "eibrs",		SPECTRE_V2_CMD_EIBRS,		  false },
+	{ "eibrs,lfence",	SPECTRE_V2_CMD_EIBRS_LFENCE,	  false },
+	{ "eibrs,retpoline",	SPECTRE_V2_CMD_EIBRS_RETPOLINE,	  false },
 	{ "auto",		SPECTRE_V2_CMD_AUTO,		  false },
 };
 
@@ -875,10 +918,30 @@ static enum spectre_v2_mitigation_cmd __init spectre_v2_parse_cmdline(void)
 	}
 
 	if ((cmd == SPECTRE_V2_CMD_RETPOLINE ||
-	     cmd == SPECTRE_V2_CMD_RETPOLINE_AMD ||
-	     cmd == SPECTRE_V2_CMD_RETPOLINE_GENERIC) &&
+	     cmd == SPECTRE_V2_CMD_RETPOLINE_LFENCE ||
+	     cmd == SPECTRE_V2_CMD_RETPOLINE_GENERIC ||
+	     cmd == SPECTRE_V2_CMD_EIBRS_LFENCE ||
+	     cmd == SPECTRE_V2_CMD_EIBRS_RETPOLINE) &&
 	    !IS_ENABLED(CONFIG_RETPOLINE)) {
-		pr_err("%s selected but not compiled in. Switching to AUTO select\n", mitigation_options[i].option);
+		pr_err("%s selected but not compiled in. Switching to AUTO select\n",
+		       mitigation_options[i].option);
+		return SPECTRE_V2_CMD_AUTO;
+	}
+
+	if ((cmd == SPECTRE_V2_CMD_EIBRS ||
+	     cmd == SPECTRE_V2_CMD_EIBRS_LFENCE ||
+	     cmd == SPECTRE_V2_CMD_EIBRS_RETPOLINE) &&
+	    !boot_cpu_has(X86_FEATURE_IBRS_ENHANCED)) {
+		pr_err("%s selected but CPU doesn't have eIBRS. Switching to AUTO select\n",
+		       mitigation_options[i].option);
+		return SPECTRE_V2_CMD_AUTO;
+	}
+
+	if ((cmd == SPECTRE_V2_CMD_RETPOLINE_LFENCE ||
+	     cmd == SPECTRE_V2_CMD_EIBRS_LFENCE) &&
+	    !boot_cpu_has(X86_FEATURE_LFENCE_RDTSC)) {
+		pr_err("%s selected, but CPU doesn't have a serializing LFENCE. Switching to AUTO select\n",
+		       mitigation_options[i].option);
 		return SPECTRE_V2_CMD_AUTO;
 	}
 
@@ -887,6 +950,16 @@ static enum spectre_v2_mitigation_cmd __init spectre_v2_parse_cmdline(void)
 	return cmd;
 }
 
+static enum spectre_v2_mitigation __init spectre_v2_select_retpoline(void)
+{
+	if (!IS_ENABLED(CONFIG_RETPOLINE)) {
+		pr_err("Kernel not compiled with retpoline; no mitigation available!");
+		return SPECTRE_V2_NONE;
+	}
+
+	return SPECTRE_V2_RETPOLINE;
+}
+
 static void __init spectre_v2_select_mitigation(void)
 {
 	enum spectre_v2_mitigation_cmd cmd = spectre_v2_parse_cmdline();
@@ -907,49 +980,64 @@ static void __init spectre_v2_select_mitigation(void)
 	case SPECTRE_V2_CMD_FORCE:
 	case SPECTRE_V2_CMD_AUTO:
 		if (boot_cpu_has(X86_FEATURE_IBRS_ENHANCED)) {
-			mode = SPECTRE_V2_IBRS_ENHANCED;
-			/* Force it so VMEXIT will restore correctly */
-			x86_spec_ctrl_base |= SPEC_CTRL_IBRS;
-			wrmsrl(MSR_IA32_SPEC_CTRL, x86_spec_ctrl_base);
-			goto specv2_set_mode;
+			mode = SPECTRE_V2_EIBRS;
+			break;
 		}
-		if (IS_ENABLED(CONFIG_RETPOLINE))
-			goto retpoline_auto;
+
+		mode = spectre_v2_select_retpoline();
 		break;
-	case SPECTRE_V2_CMD_RETPOLINE_AMD:
-		if (IS_ENABLED(CONFIG_RETPOLINE))
-			goto retpoline_amd;
+
+	case SPECTRE_V2_CMD_RETPOLINE_LFENCE:
+		pr_err(SPECTRE_V2_LFENCE_MSG);
+		mode = SPECTRE_V2_LFENCE;
 		break;
+
 	case SPECTRE_V2_CMD_RETPOLINE_GENERIC:
-		if (IS_ENABLED(CONFIG_RETPOLINE))
-			goto retpoline_generic;
+		mode = SPECTRE_V2_RETPOLINE;
 		break;
+
 	case SPECTRE_V2_CMD_RETPOLINE:
-		if (IS_ENABLED(CONFIG_RETPOLINE))
-			goto retpoline_auto;
+		mode = spectre_v2_select_retpoline();
+		break;
+
+	case SPECTRE_V2_CMD_EIBRS:
+		mode = SPECTRE_V2_EIBRS;
+		break;
+
+	case SPECTRE_V2_CMD_EIBRS_LFENCE:
+		mode = SPECTRE_V2_EIBRS_LFENCE;
+		break;
+
+	case SPECTRE_V2_CMD_EIBRS_RETPOLINE:
+		mode = SPECTRE_V2_EIBRS_RETPOLINE;
 		break;
 	}
-	pr_err("Spectre mitigation: kernel not compiled with retpoline; no mitigation available!");
-	return;
 
-retpoline_auto:
-	if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD ||
-	    boot_cpu_data.x86_vendor == X86_VENDOR_HYGON) {
-	retpoline_amd:
-		if (!boot_cpu_has(X86_FEATURE_LFENCE_RDTSC)) {
-			pr_err("Spectre mitigation: LFENCE not serializing, switching to generic retpoline\n");
-			goto retpoline_generic;
-		}
-		mode = SPECTRE_V2_RETPOLINE_AMD;
-		setup_force_cpu_cap(X86_FEATURE_RETPOLINE_AMD);
-		setup_force_cpu_cap(X86_FEATURE_RETPOLINE);
-	} else {
-	retpoline_generic:
-		mode = SPECTRE_V2_RETPOLINE_GENERIC;
+	if (mode == SPECTRE_V2_EIBRS && unprivileged_ebpf_enabled())
+		pr_err(SPECTRE_V2_EIBRS_EBPF_MSG);
+
+	if (spectre_v2_in_eibrs_mode(mode)) {
+		/* Force it so VMEXIT will restore correctly */
+		x86_spec_ctrl_base |= SPEC_CTRL_IBRS;
+		wrmsrl(MSR_IA32_SPEC_CTRL, x86_spec_ctrl_base);
+	}
+
+	switch (mode) {
+	case SPECTRE_V2_NONE:
+	case SPECTRE_V2_EIBRS:
+		break;
+
+	case SPECTRE_V2_LFENCE:
+	case SPECTRE_V2_EIBRS_LFENCE:
+		setup_force_cpu_cap(X86_FEATURE_RETPOLINE_LFENCE);
+		fallthrough;
+
+	case SPECTRE_V2_RETPOLINE:
+	case SPECTRE_V2_EIBRS_RETPOLINE:
 		setup_force_cpu_cap(X86_FEATURE_RETPOLINE);
+		break;
 	}
 
-specv2_set_mode:
 	spectre_v2_enabled = mode;
 	pr_info("%s\n", spectre_v2_strings[mode]);
 
@@ -975,7 +1063,7 @@ specv2_set_mode:
 	 * the CPU supports Enhanced IBRS, kernel might un-intentionally not
 	 * enable IBRS around firmware calls.
 	 */
-	if (boot_cpu_has(X86_FEATURE_IBRS) && mode != SPECTRE_V2_IBRS_ENHANCED) {
+	if (boot_cpu_has(X86_FEATURE_IBRS) && !spectre_v2_in_eibrs_mode(mode)) {
 		setup_force_cpu_cap(X86_FEATURE_USE_IBRS_FW);
 		pr_info("Enabling Restricted Speculation for firmware calls\n");
 	}
@@ -1045,6 +1133,10 @@ void cpu_bugs_smt_update(void)
 {
 	mutex_lock(&spec_ctrl_mutex);
 
+	if (sched_smt_active() && unprivileged_ebpf_enabled() &&
+	    spectre_v2_enabled == SPECTRE_V2_EIBRS_LFENCE)
+		pr_warn_once(SPECTRE_V2_EIBRS_LFENCE_EBPF_SMT_MSG);
+
 	switch (spectre_v2_user_stibp) {
 	case SPECTRE_V2_USER_NONE:
 		break;
@@ -1684,7 +1776,7 @@ static ssize_t tsx_async_abort_show_state(char *buf)
 
 static char *stibp_state(void)
 {
-	if (spectre_v2_enabled == SPECTRE_V2_IBRS_ENHANCED)
+	if (spectre_v2_in_eibrs_mode(spectre_v2_enabled))
 		return "";
 
 	switch (spectre_v2_user_stibp) {
@@ -1714,6 +1806,27 @@ static char *ibpb_state(void)
 	return "";
 }
 
+static ssize_t spectre_v2_show_state(char *buf)
+{
+	if (spectre_v2_enabled == SPECTRE_V2_LFENCE)
+		return sprintf(buf, "Vulnerable: LFENCE\n");
+
+	if (spectre_v2_enabled == SPECTRE_V2_EIBRS && unprivileged_ebpf_enabled())
+		return sprintf(buf, "Vulnerable: eIBRS with unprivileged eBPF\n");
+
+	if (sched_smt_active() && unprivileged_ebpf_enabled() &&
+	    spectre_v2_enabled == SPECTRE_V2_EIBRS_LFENCE)
+		return sprintf(buf, "Vulnerable: eIBRS+LFENCE with unprivileged eBPF and SMT\n");
+
+	return sprintf(buf, "%s%s%s%s%s%s\n",
+		       spectre_v2_strings[spectre_v2_enabled],
+		       ibpb_state(),
+		       boot_cpu_has(X86_FEATURE_USE_IBRS_FW) ? ", IBRS_FW" : "",
+		       stibp_state(),
+		       boot_cpu_has(X86_FEATURE_RSB_CTXSW) ? ", RSB filling" : "",
+		       spectre_v2_module_string());
+}
+
 static ssize_t srbds_show_state(char *buf)
 {
 	return sprintf(buf, "%s\n", srbds_strings[srbds_mitigation]);
@@ -1739,12 +1852,7 @@ static ssize_t cpu_show_common(struct device *dev, struct device_attribute *attr
 		return sprintf(buf, "%s\n", spectre_v1_strings[spectre_v1_mitigation]);
 
 	case X86_BUG_SPECTRE_V2:
-		return sprintf(buf, "%s%s%s%s%s%s\n", spectre_v2_strings[spectre_v2_enabled],
-			       ibpb_state(),
-			       boot_cpu_has(X86_FEATURE_USE_IBRS_FW) ? ", IBRS_FW" : "",
-			       stibp_state(),
-			       boot_cpu_has(X86_FEATURE_RSB_CTXSW) ? ", RSB filling" : "",
-			       spectre_v2_module_string());
+		return spectre_v2_show_state(buf);
 
 	case X86_BUG_SPEC_STORE_BYPASS:
 		return sprintf(buf, "%s\n", ssb_strings[ssb_mode]);
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 7b8382c11788..64deb7727d00 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -88,6 +88,83 @@ EXPORT_SYMBOL_GPL(get_llc_id);
 /* L2 cache ID of each logical CPU */
 DEFINE_PER_CPU_READ_MOSTLY(u16, cpu_l2c_id) = BAD_APICID;
 
+static struct ppin_info {
+	int	feature;
+	int	msr_ppin_ctl;
+	int	msr_ppin;
+} ppin_info[] = {
+	[X86_VENDOR_INTEL] = {
+		.feature = X86_FEATURE_INTEL_PPIN,
+		.msr_ppin_ctl = MSR_PPIN_CTL,
+		.msr_ppin = MSR_PPIN
+	},
+	[X86_VENDOR_AMD] = {
+		.feature = X86_FEATURE_AMD_PPIN,
+		.msr_ppin_ctl = MSR_AMD_PPIN_CTL,
+		.msr_ppin = MSR_AMD_PPIN
+	},
+};
+
+static const struct x86_cpu_id ppin_cpuids[] = {
+	X86_MATCH_FEATURE(X86_FEATURE_AMD_PPIN, &ppin_info[X86_VENDOR_AMD]),
+	X86_MATCH_FEATURE(X86_FEATURE_INTEL_PPIN, &ppin_info[X86_VENDOR_INTEL]),
+
+	/* Legacy models without CPUID enumeration */
+	X86_MATCH_INTEL_FAM6_MODEL(IVYBRIDGE_X, &ppin_info[X86_VENDOR_INTEL]),
+	X86_MATCH_INTEL_FAM6_MODEL(HASWELL_X, &ppin_info[X86_VENDOR_INTEL]),
+	X86_MATCH_INTEL_FAM6_MODEL(BROADWELL_D, &ppin_info[X86_VENDOR_INTEL]),
+	X86_MATCH_INTEL_FAM6_MODEL(BROADWELL_X, &ppin_info[X86_VENDOR_INTEL]),
+	X86_MATCH_INTEL_FAM6_MODEL(SKYLAKE_X, &ppin_info[X86_VENDOR_INTEL]),
+	X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_X, &ppin_info[X86_VENDOR_INTEL]),
+	X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_D, &ppin_info[X86_VENDOR_INTEL]),
+	X86_MATCH_INTEL_FAM6_MODEL(SAPPHIRERAPIDS_X, &ppin_info[X86_VENDOR_INTEL]),
+	X86_MATCH_INTEL_FAM6_MODEL(XEON_PHI_KNL, &ppin_info[X86_VENDOR_INTEL]),
+	X86_MATCH_INTEL_FAM6_MODEL(XEON_PHI_KNM, &ppin_info[X86_VENDOR_INTEL]),
+
+	{}
+};
+
+static void ppin_init(struct cpuinfo_x86 *c)
+{
+	const struct x86_cpu_id *id;
+	unsigned long long val;
+	struct ppin_info *info;
+
+	id = x86_match_cpu(ppin_cpuids);
+	if (!id)
+		return;
+
+	/*
+	 * Testing the presence of the MSR is not enough. Need to check
+	 * that the PPIN_CTL allows reading of the PPIN.
+	 */
+	info = (struct ppin_info *)id->driver_data;
+
+	if (rdmsrl_safe(info->msr_ppin_ctl, &val))
+		goto clear_ppin;
+
+	if ((val & 3UL) == 1UL) {
+		/* PPIN locked in disabled mode */
+		goto clear_ppin;
+	}
+
+	/* If PPIN is disabled, try to enable */
+	if (!(val & 2UL)) {
+		wrmsrl_safe(info->msr_ppin_ctl,  val | 2UL);
+		rdmsrl_safe(info->msr_ppin_ctl, &val);
+	}
+
+	/* Is the enable bit set? */
+	if (val & 2UL) {
+		c->ppin = __rdmsr(info->msr_ppin);
+		set_cpu_cap(c, info->feature);
+		return;
+	}
+
+clear_ppin:
+	clear_cpu_cap(c, info->feature);
+}
+
 /* correctly size the local cpu masks */
 void __init setup_cpu_local_masks(void)
 {
@@ -1655,6 +1732,8 @@ static void identify_cpu(struct cpuinfo_x86 *c)
 			c->x86_capability[i] |= boot_cpu_data.x86_capability[i];
 	}
 
+	ppin_init(c);
+
 	/* Init Machine Check Exception if available. */
 	mcheck_cpu_init(c);
 
diff --git a/arch/x86/kernel/cpu/mce/amd.c b/arch/x86/kernel/cpu/mce/amd.c
index 9f4b508886dd..1940d305db1c 100644
--- a/arch/x86/kernel/cpu/mce/amd.c
+++ b/arch/x86/kernel/cpu/mce/amd.c
@@ -993,6 +993,7 @@ static struct attribute *default_attrs[] = {
 	NULL,	/* possibly interrupt_enable if supported, see below */
 	NULL,
 };
+ATTRIBUTE_GROUPS(default);
 
 #define to_block(k)	container_of(k, struct threshold_block, kobj)
 #define to_attr(a)	container_of(a, struct threshold_attr, attr)
@@ -1029,7 +1030,7 @@ static void threshold_block_release(struct kobject *kobj);
 
 static struct kobj_type threshold_ktype = {
 	.sysfs_ops		= &threshold_ops,
-	.default_attrs		= default_attrs,
+	.default_groups		= default_groups,
 	.release		= threshold_block_release,
 };
 
@@ -1101,10 +1102,10 @@ static int allocate_threshold_blocks(unsigned int cpu, struct threshold_bank *tb
 	b->threshold_limit	= THRESHOLD_MAX;
 
 	if (b->interrupt_capable) {
-		threshold_ktype.default_attrs[2] = &interrupt_enable.attr;
+		default_attrs[2] = &interrupt_enable.attr;
 		b->interrupt_enable = 1;
 	} else {
-		threshold_ktype.default_attrs[2] = NULL;
+		default_attrs[2] = NULL;
 	}
 
 	INIT_LIST_HEAD(&b->miscj);
diff --git a/arch/x86/kernel/cpu/mce/core.c b/arch/x86/kernel/cpu/mce/core.c
index 5818b837fd4d..e53d3e6096fb 100644
--- a/arch/x86/kernel/cpu/mce/core.c
+++ b/arch/x86/kernel/cpu/mce/core.c
@@ -138,12 +138,7 @@ void mce_setup(struct mce *m)
 	m->socketid = cpu_data(m->extcpu).phys_proc_id;
 	m->apicid = cpu_data(m->extcpu).initial_apicid;
 	m->mcgcap = __rdmsr(MSR_IA32_MCG_CAP);
-
-	if (this_cpu_has(X86_FEATURE_INTEL_PPIN))
-		m->ppin = __rdmsr(MSR_PPIN);
-	else if (this_cpu_has(X86_FEATURE_AMD_PPIN))
-		m->ppin = __rdmsr(MSR_AMD_PPIN);
-
+	m->ppin = cpu_data(m->extcpu).ppin;
 	m->microcode = boot_cpu_data.microcode;
 }
 
@@ -1304,10 +1299,12 @@ static void kill_me_maybe(struct callback_head *cb)
 
 	/*
 	 * -EHWPOISON from memory_failure() means that it already sent SIGBUS
-	 * to the current process with the proper error info, so no need to
-	 * send SIGBUS here again.
+	 * to the current process with the proper error info,
+	 * -EOPNOTSUPP means hwpoison_filter() filtered the error event,
+	 *
+	 * In both cases, no further processing is required.
 	 */
-	if (ret == -EHWPOISON)
+	if (ret == -EHWPOISON || ret == -EOPNOTSUPP)
 		return;
 
 	pr_err("Memory error not recovered");
diff --git a/arch/x86/kernel/cpu/mce/intel.c b/arch/x86/kernel/cpu/mce/intel.c
index baafbb37be67..95275a5e57e0 100644
--- a/arch/x86/kernel/cpu/mce/intel.c
+++ b/arch/x86/kernel/cpu/mce/intel.c
@@ -470,47 +470,6 @@ void intel_clear_lmce(void)
 	wrmsrl(MSR_IA32_MCG_EXT_CTL, val);
 }
 
-static void intel_ppin_init(struct cpuinfo_x86 *c)
-{
-	unsigned long long val;
-
-	/*
-	 * Even if testing the presence of the MSR would be enough, we don't
-	 * want to risk the situation where other models reuse this MSR for
-	 * other purposes.
-	 */
-	switch (c->x86_model) {
-	case INTEL_FAM6_IVYBRIDGE_X:
-	case INTEL_FAM6_HASWELL_X:
-	case INTEL_FAM6_BROADWELL_D:
-	case INTEL_FAM6_BROADWELL_X:
-	case INTEL_FAM6_SKYLAKE_X:
-	case INTEL_FAM6_ICELAKE_X:
-	case INTEL_FAM6_ICELAKE_D:
-	case INTEL_FAM6_SAPPHIRERAPIDS_X:
-	case INTEL_FAM6_XEON_PHI_KNL:
-	case INTEL_FAM6_XEON_PHI_KNM:
-
-		if (rdmsrl_safe(MSR_PPIN_CTL, &val))
-			return;
-
-		if ((val & 3UL) == 1UL) {
-			/* PPIN locked in disabled mode */
-			return;
-		}
-
-		/* If PPIN is disabled, try to enable */
-		if (!(val & 2UL)) {
-			wrmsrl_safe(MSR_PPIN_CTL,  val | 2UL);
-			rdmsrl_safe(MSR_PPIN_CTL, &val);
-		}
-
-		/* Is the enable bit set? */
-		if (val & 2UL)
-			set_cpu_cap(c, X86_FEATURE_INTEL_PPIN);
-	}
-}
-
 /*
  * Enable additional error logs from the integrated
  * memory controller on processors that support this.
@@ -535,7 +494,6 @@ void mce_intel_feature_init(struct cpuinfo_x86 *c)
 {
 	intel_init_cmci();
 	intel_init_lmce();
-	intel_ppin_init(c);
 	intel_imc_init(c);
 }
 
diff --git a/arch/x86/kernel/cpu/mshyperv.c b/arch/x86/kernel/cpu/mshyperv.c
index 5a99f993e639..e0a572472052 100644
--- a/arch/x86/kernel/cpu/mshyperv.c
+++ b/arch/x86/kernel/cpu/mshyperv.c
@@ -33,6 +33,7 @@
 #include <asm/nmi.h>
 #include <clocksource/hyperv_timer.h>
 #include <asm/numa.h>
+#include <asm/coco.h>
 
 /* Is Linux running as the root partition? */
 bool hv_root_partition;
@@ -344,6 +345,11 @@ static void __init ms_hyperv_init_platform(void)
 		 */
 		swiotlb_force = SWIOTLB_FORCE;
 #endif
+		/* Isolation VMs are unenlightened SEV-based VMs, thus this check: */
+		if (IS_ENABLED(CONFIG_AMD_MEM_ENCRYPT)) {
+			if (hv_get_isolation_type() != HV_ISOLATION_TYPE_NONE)
+				cc_set_vendor(CC_VENDOR_HYPERV);
+		}
 	}
 
 	if (hv_max_functions_eax >= HYPERV_CPUID_NESTED_FEATURES) {
diff --git a/arch/x86/kernel/cpu/scattered.c b/arch/x86/kernel/cpu/scattered.c
index 21d1f062895a..4143b1e4c5c6 100644
--- a/arch/x86/kernel/cpu/scattered.c
+++ b/arch/x86/kernel/cpu/scattered.c
@@ -26,6 +26,7 @@ struct cpuid_bit {
 static const struct cpuid_bit cpuid_bits[] = {
 	{ X86_FEATURE_APERFMPERF,       CPUID_ECX,  0, 0x00000006, 0 },
 	{ X86_FEATURE_EPB,		CPUID_ECX,  3, 0x00000006, 0 },
+	{ X86_FEATURE_INTEL_PPIN,	CPUID_EBX,  0, 0x00000007, 1 },
 	{ X86_FEATURE_CQM_LLC,		CPUID_EDX,  1, 0x0000000f, 0 },
 	{ X86_FEATURE_CQM_OCCUP_LLC,	CPUID_EDX,  0, 0x0000000f, 1 },
 	{ X86_FEATURE_CQM_MBM_TOTAL,	CPUID_EDX,  1, 0x0000000f, 1 },
diff --git a/arch/x86/kernel/cpu/sgx/encl.c b/arch/x86/kernel/cpu/sgx/encl.c
index 001808e3901c..7c63a1911fae 100644
--- a/arch/x86/kernel/cpu/sgx/encl.c
+++ b/arch/x86/kernel/cpu/sgx/encl.c
@@ -13,6 +13,30 @@
 #include "sgx.h"
 
 /*
+ * Calculate byte offset of a PCMD struct associated with an enclave page. PCMD's
+ * follow right after the EPC data in the backing storage. In addition to the
+ * visible enclave pages, there's one extra page slot for SECS, before PCMD
+ * structs.
+ */
+static inline pgoff_t sgx_encl_get_backing_page_pcmd_offset(struct sgx_encl *encl,
+							    unsigned long page_index)
+{
+	pgoff_t epc_end_off = encl->size + sizeof(struct sgx_secs);
+
+	return epc_end_off + page_index * sizeof(struct sgx_pcmd);
+}
+
+/*
+ * Free a page from the backing storage in the given page index.
+ */
+static inline void sgx_encl_truncate_backing_page(struct sgx_encl *encl, unsigned long page_index)
+{
+	struct inode *inode = file_inode(encl->backing);
+
+	shmem_truncate_range(inode, PFN_PHYS(page_index), PFN_PHYS(page_index) + PAGE_SIZE - 1);
+}
+
+/*
  * ELDU: Load an EPC page as unblocked. For more info, see "OS Management of EPC
  * Pages" in the SDM.
  */
@@ -22,9 +46,11 @@ static int __sgx_encl_eldu(struct sgx_encl_page *encl_page,
 {
 	unsigned long va_offset = encl_page->desc & SGX_ENCL_PAGE_VA_OFFSET_MASK;
 	struct sgx_encl *encl = encl_page->encl;
+	pgoff_t page_index, page_pcmd_off;
 	struct sgx_pageinfo pginfo;
 	struct sgx_backing b;
-	pgoff_t page_index;
+	bool pcmd_page_empty;
+	u8 *pcmd_page;
 	int ret;
 
 	if (secs_page)
@@ -32,14 +58,16 @@ static int __sgx_encl_eldu(struct sgx_encl_page *encl_page,
 	else
 		page_index = PFN_DOWN(encl->size);
 
+	page_pcmd_off = sgx_encl_get_backing_page_pcmd_offset(encl, page_index);
+
 	ret = sgx_encl_get_backing(encl, page_index, &b);
 	if (ret)
 		return ret;
 
 	pginfo.addr = encl_page->desc & PAGE_MASK;
 	pginfo.contents = (unsigned long)kmap_atomic(b.contents);
-	pginfo.metadata = (unsigned long)kmap_atomic(b.pcmd) +
-			  b.pcmd_offset;
+	pcmd_page = kmap_atomic(b.pcmd);
+	pginfo.metadata = (unsigned long)pcmd_page + b.pcmd_offset;
 
 	if (secs_page)
 		pginfo.secs = (u64)sgx_get_epc_virt_addr(secs_page);
@@ -55,11 +83,24 @@ static int __sgx_encl_eldu(struct sgx_encl_page *encl_page,
 		ret = -EFAULT;
 	}
 
-	kunmap_atomic((void *)(unsigned long)(pginfo.metadata - b.pcmd_offset));
+	memset(pcmd_page + b.pcmd_offset, 0, sizeof(struct sgx_pcmd));
+
+	/*
+	 * The area for the PCMD in the page was zeroed above.  Check if the
+	 * whole page is now empty meaning that all PCMD's have been zeroed:
+	 */
+	pcmd_page_empty = !memchr_inv(pcmd_page, 0, PAGE_SIZE);
+
+	kunmap_atomic(pcmd_page);
 	kunmap_atomic((void *)(unsigned long)pginfo.contents);
 
 	sgx_encl_put_backing(&b, false);
 
+	sgx_encl_truncate_backing_page(encl, page_index);
+
+	if (pcmd_page_empty)
+		sgx_encl_truncate_backing_page(encl, PFN_DOWN(page_pcmd_off));
+
 	return ret;
 }
 
@@ -410,6 +451,8 @@ void sgx_encl_release(struct kref *ref)
 		}
 
 		kfree(entry);
+		/* Invoke scheduler to prevent soft lockups. */
+		cond_resched();
 	}
 
 	xa_destroy(&encl->page_array);
@@ -577,7 +620,7 @@ static struct page *sgx_encl_get_backing_page(struct sgx_encl *encl,
 int sgx_encl_get_backing(struct sgx_encl *encl, unsigned long page_index,
 			 struct sgx_backing *backing)
 {
-	pgoff_t pcmd_index = PFN_DOWN(encl->size) + 1 + (page_index >> 5);
+	pgoff_t page_pcmd_off = sgx_encl_get_backing_page_pcmd_offset(encl, page_index);
 	struct page *contents;
 	struct page *pcmd;
 
@@ -585,7 +628,7 @@ int sgx_encl_get_backing(struct sgx_encl *encl, unsigned long page_index,
 	if (IS_ERR(contents))
 		return PTR_ERR(contents);
 
-	pcmd = sgx_encl_get_backing_page(encl, pcmd_index);
+	pcmd = sgx_encl_get_backing_page(encl, PFN_DOWN(page_pcmd_off));
 	if (IS_ERR(pcmd)) {
 		put_page(contents);
 		return PTR_ERR(pcmd);
@@ -594,9 +637,7 @@ int sgx_encl_get_backing(struct sgx_encl *encl, unsigned long page_index,
 	backing->page_index = page_index;
 	backing->contents = contents;
 	backing->pcmd = pcmd;
-	backing->pcmd_offset =
-		(page_index & (PAGE_SIZE / sizeof(struct sgx_pcmd) - 1)) *
-		sizeof(struct sgx_pcmd);
+	backing->pcmd_offset = page_pcmd_off & (PAGE_SIZE - 1);
 
 	return 0;
 }
diff --git a/arch/x86/kernel/cpu/sgx/main.c b/arch/x86/kernel/cpu/sgx/main.c
index 4b41efc9e367..8e4bc6453d26 100644
--- a/arch/x86/kernel/cpu/sgx/main.c
+++ b/arch/x86/kernel/cpu/sgx/main.c
@@ -344,10 +344,8 @@ static void sgx_reclaim_pages(void)
 {
 	struct sgx_epc_page *chunk[SGX_NR_TO_SCAN];
 	struct sgx_backing backing[SGX_NR_TO_SCAN];
-	struct sgx_epc_section *section;
 	struct sgx_encl_page *encl_page;
 	struct sgx_epc_page *epc_page;
-	struct sgx_numa_node *node;
 	pgoff_t page_index;
 	int cnt = 0;
 	int ret;
@@ -418,13 +416,7 @@ skip:
 		kref_put(&encl_page->encl->refcount, sgx_encl_release);
 		epc_page->flags &= ~SGX_EPC_PAGE_RECLAIMER_TRACKED;
 
-		section = &sgx_epc_sections[epc_page->section];
-		node = section->node;
-
-		spin_lock(&node->lock);
-		list_add_tail(&epc_page->list, &node->free_page_list);
-		spin_unlock(&node->lock);
-		atomic_long_inc(&sgx_nr_free_pages);
+		sgx_free_epc_page(epc_page);
 	}
 }
 
diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c
index 53de044e5654..afae4dd77495 100644
--- a/arch/x86/kernel/dumpstack.c
+++ b/arch/x86/kernel/dumpstack.c
@@ -81,12 +81,6 @@ static int copy_code(struct pt_regs *regs, u8 *buf, unsigned long src,
 	/* The user space code from other tasks cannot be accessed. */
 	if (regs != task_pt_regs(current))
 		return -EPERM;
-	/*
-	 * Make sure userspace isn't trying to trick us into dumping kernel
-	 * memory by pointing the userspace instruction pointer at it.
-	 */
-	if (__chk_range_not_ok(src, nbytes, TASK_SIZE_MAX))
-		return -EINVAL;
 
 	/*
 	 * Even if named copy_from_user_nmi() this can be invoked from
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index bc0657f0deed..f267205f2d5a 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -995,8 +995,10 @@ early_param("memmap", parse_memmap_opt);
  */
 void __init e820__reserve_setup_data(void)
 {
+	struct setup_indirect *indirect;
 	struct setup_data *data;
-	u64 pa_data;
+	u64 pa_data, pa_next;
+	u32 len;
 
 	pa_data = boot_params.hdr.setup_data;
 	if (!pa_data)
@@ -1004,6 +1006,14 @@ void __init e820__reserve_setup_data(void)
 
 	while (pa_data) {
 		data = early_memremap(pa_data, sizeof(*data));
+		if (!data) {
+			pr_warn("e820: failed to memremap setup_data entry\n");
+			return;
+		}
+
+		len = sizeof(*data);
+		pa_next = data->next;
+
 		e820__range_update(pa_data, sizeof(*data)+data->len, E820_TYPE_RAM, E820_TYPE_RESERVED_KERN);
 
 		/*
@@ -1015,18 +1025,27 @@ void __init e820__reserve_setup_data(void)
 						 sizeof(*data) + data->len,
 						 E820_TYPE_RAM, E820_TYPE_RESERVED_KERN);
 
-		if (data->type == SETUP_INDIRECT &&
-		    ((struct setup_indirect *)data->data)->type != SETUP_INDIRECT) {
-			e820__range_update(((struct setup_indirect *)data->data)->addr,
-					   ((struct setup_indirect *)data->data)->len,
-					   E820_TYPE_RAM, E820_TYPE_RESERVED_KERN);
-			e820__range_update_kexec(((struct setup_indirect *)data->data)->addr,
-						 ((struct setup_indirect *)data->data)->len,
-						 E820_TYPE_RAM, E820_TYPE_RESERVED_KERN);
+		if (data->type == SETUP_INDIRECT) {
+			len += data->len;
+			early_memunmap(data, sizeof(*data));
+			data = early_memremap(pa_data, len);
+			if (!data) {
+				pr_warn("e820: failed to memremap indirect setup_data\n");
+				return;
+			}
+
+			indirect = (struct setup_indirect *)data->data;
+
+			if (indirect->type != SETUP_INDIRECT) {
+				e820__range_update(indirect->addr, indirect->len,
+						   E820_TYPE_RAM, E820_TYPE_RESERVED_KERN);
+				e820__range_update_kexec(indirect->addr, indirect->len,
+							 E820_TYPE_RAM, E820_TYPE_RESERVED_KERN);
+			}
 		}
 
-		pa_data = data->next;
-		early_memunmap(data, sizeof(*data));
+		pa_data = pa_next;
+		early_memunmap(data, len);
 	}
 
 	e820__update_table(e820_table);
diff --git a/arch/x86/kernel/fpu/core.c b/arch/x86/kernel/fpu/core.c
index 8dea01ffc5c1..19821f027cb3 100644
--- a/arch/x86/kernel/fpu/core.c
+++ b/arch/x86/kernel/fpu/core.c
@@ -612,6 +612,13 @@ int fpu_clone(struct task_struct *dst, unsigned long clone_flags)
 		fpu_inherit_perms(dst_fpu);
 	fpregs_unlock();
 
+	/*
+	 * Children never inherit PASID state.
+	 * Force it to have its init value:
+	 */
+	if (use_xsave())
+		dst_fpu->fpstate->regs.xsave.header.xfeatures &= ~XFEATURE_MASK_PASID;
+
 	trace_x86_fpu_copy_src(src_fpu);
 	trace_x86_fpu_copy_dst(dst_fpu);
 
diff --git a/arch/x86/kernel/fpu/regset.c b/arch/x86/kernel/fpu/regset.c
index 437d7c930c0b..75ffaef8c299 100644
--- a/arch/x86/kernel/fpu/regset.c
+++ b/arch/x86/kernel/fpu/regset.c
@@ -91,11 +91,9 @@ int xfpregs_set(struct task_struct *target, const struct user_regset *regset,
 		const void *kbuf, const void __user *ubuf)
 {
 	struct fpu *fpu = &target->thread.fpu;
-	struct user32_fxsr_struct newstate;
+	struct fxregs_state newstate;
 	int ret;
 
-	BUILD_BUG_ON(sizeof(newstate) != sizeof(struct fxregs_state));
-
 	if (!cpu_feature_enabled(X86_FEATURE_FXSR))
 		return -ENODEV;
 
@@ -116,9 +114,10 @@ int xfpregs_set(struct task_struct *target, const struct user_regset *regset,
 	/* Copy the state  */
 	memcpy(&fpu->fpstate->regs.fxsave, &newstate, sizeof(newstate));
 
-	/* Clear xmm8..15 */
+	/* Clear xmm8..15 for 32-bit callers */
 	BUILD_BUG_ON(sizeof(fpu->__fpstate.regs.fxsave.xmm_space) != 16 * 16);
-	memset(&fpu->fpstate->regs.fxsave.xmm_space[8], 0, 8 * 16);
+	if (in_ia32_syscall())
+		memset(&fpu->fpstate->regs.fxsave.xmm_space[8*4], 0, 8 * 16);
 
 	/* Mark FP and SSE as in use when XSAVE is enabled */
 	if (use_xsave())
diff --git a/arch/x86/kernel/fpu/xstate.c b/arch/x86/kernel/fpu/xstate.c
index 02b3ddaf4f75..7c7824ae7862 100644
--- a/arch/x86/kernel/fpu/xstate.c
+++ b/arch/x86/kernel/fpu/xstate.c
@@ -1558,7 +1558,10 @@ static int fpstate_realloc(u64 xfeatures, unsigned int ksize,
 		fpregs_restore_userregs();
 
 	newfps->xfeatures = curfps->xfeatures | xfeatures;
-	newfps->user_xfeatures = curfps->user_xfeatures | xfeatures;
+
+	if (!guest_fpu)
+		newfps->user_xfeatures = curfps->user_xfeatures | xfeatures;
+
 	newfps->xfd = curfps->xfd & ~xfeatures;
 
 	/* Do the final updates within the locked region */
diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c
index de563db9cdcd..4f5ecbbaae77 100644
--- a/arch/x86/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
@@ -126,7 +126,7 @@ static bool __head check_la57_support(unsigned long physaddr)
 }
 #endif
 
-static unsigned long sme_postprocess_startup(struct boot_params *bp, pmdval_t *pmd)
+static unsigned long __head sme_postprocess_startup(struct boot_params *bp, pmdval_t *pmd)
 {
 	unsigned long vaddr, vaddr_end;
 	int i;
diff --git a/arch/x86/kernel/kdebugfs.c b/arch/x86/kernel/kdebugfs.c
index 64b6da95af98..e2e89bebcbc3 100644
--- a/arch/x86/kernel/kdebugfs.c
+++ b/arch/x86/kernel/kdebugfs.c
@@ -88,11 +88,13 @@ create_setup_data_node(struct dentry *parent, int no,
 
 static int __init create_setup_data_nodes(struct dentry *parent)
 {
+	struct setup_indirect *indirect;
 	struct setup_data_node *node;
 	struct setup_data *data;
-	int error;
+	u64 pa_data, pa_next;
 	struct dentry *d;
-	u64 pa_data;
+	int error;
+	u32 len;
 	int no = 0;
 
 	d = debugfs_create_dir("setup_data", parent);
@@ -112,12 +114,29 @@ static int __init create_setup_data_nodes(struct dentry *parent)
 			error = -ENOMEM;
 			goto err_dir;
 		}
-
-		if (data->type == SETUP_INDIRECT &&
-		    ((struct setup_indirect *)data->data)->type != SETUP_INDIRECT) {
-			node->paddr = ((struct setup_indirect *)data->data)->addr;
-			node->type  = ((struct setup_indirect *)data->data)->type;
-			node->len   = ((struct setup_indirect *)data->data)->len;
+		pa_next = data->next;
+
+		if (data->type == SETUP_INDIRECT) {
+			len = sizeof(*data) + data->len;
+			memunmap(data);
+			data = memremap(pa_data, len, MEMREMAP_WB);
+			if (!data) {
+				kfree(node);
+				error = -ENOMEM;
+				goto err_dir;
+			}
+
+			indirect = (struct setup_indirect *)data->data;
+
+			if (indirect->type != SETUP_INDIRECT) {
+				node->paddr = indirect->addr;
+				node->type  = indirect->type;
+				node->len   = indirect->len;
+			} else {
+				node->paddr = pa_data;
+				node->type  = data->type;
+				node->len   = data->len;
+			}
 		} else {
 			node->paddr = pa_data;
 			node->type  = data->type;
@@ -125,7 +144,7 @@ static int __init create_setup_data_nodes(struct dentry *parent)
 		}
 
 		create_setup_data_node(d, no, node);
-		pa_data = data->next;
+		pa_data = pa_next;
 
 		memunmap(data);
 		no++;
diff --git a/arch/x86/kernel/ksysfs.c b/arch/x86/kernel/ksysfs.c
index d0a19121c6a4..257892fcefa7 100644
--- a/arch/x86/kernel/ksysfs.c
+++ b/arch/x86/kernel/ksysfs.c
@@ -91,26 +91,41 @@ static int get_setup_data_paddr(int nr, u64 *paddr)
 
 static int __init get_setup_data_size(int nr, size_t *size)
 {
-	int i = 0;
+	u64 pa_data = boot_params.hdr.setup_data, pa_next;
+	struct setup_indirect *indirect;
 	struct setup_data *data;
-	u64 pa_data = boot_params.hdr.setup_data;
+	int i = 0;
+	u32 len;
 
 	while (pa_data) {
 		data = memremap(pa_data, sizeof(*data), MEMREMAP_WB);
 		if (!data)
 			return -ENOMEM;
+		pa_next = data->next;
+
 		if (nr == i) {
-			if (data->type == SETUP_INDIRECT &&
-			    ((struct setup_indirect *)data->data)->type != SETUP_INDIRECT)
-				*size = ((struct setup_indirect *)data->data)->len;
-			else
+			if (data->type == SETUP_INDIRECT) {
+				len = sizeof(*data) + data->len;
+				memunmap(data);
+				data = memremap(pa_data, len, MEMREMAP_WB);
+				if (!data)
+					return -ENOMEM;
+
+				indirect = (struct setup_indirect *)data->data;
+
+				if (indirect->type != SETUP_INDIRECT)
+					*size = indirect->len;
+				else
+					*size = data->len;
+			} else {
 				*size = data->len;
+			}
 
 			memunmap(data);
 			return 0;
 		}
 
-		pa_data = data->next;
+		pa_data = pa_next;
 		memunmap(data);
 		i++;
 	}
@@ -120,9 +135,11 @@ static int __init get_setup_data_size(int nr, size_t *size)
 static ssize_t type_show(struct kobject *kobj,
 			 struct kobj_attribute *attr, char *buf)
 {
+	struct setup_indirect *indirect;
+	struct setup_data *data;
 	int nr, ret;
 	u64 paddr;
-	struct setup_data *data;
+	u32 len;
 
 	ret = kobj_to_setup_data_nr(kobj, &nr);
 	if (ret)
@@ -135,10 +152,20 @@ static ssize_t type_show(struct kobject *kobj,
 	if (!data)
 		return -ENOMEM;
 
-	if (data->type == SETUP_INDIRECT)
-		ret = sprintf(buf, "0x%x\n", ((struct setup_indirect *)data->data)->type);
-	else
+	if (data->type == SETUP_INDIRECT) {
+		len = sizeof(*data) + data->len;
+		memunmap(data);
+		data = memremap(paddr, len, MEMREMAP_WB);
+		if (!data)
+			return -ENOMEM;
+
+		indirect = (struct setup_indirect *)data->data;
+
+		ret = sprintf(buf, "0x%x\n", indirect->type);
+	} else {
 		ret = sprintf(buf, "0x%x\n", data->type);
+	}
+
 	memunmap(data);
 	return ret;
 }
@@ -149,9 +176,10 @@ static ssize_t setup_data_data_read(struct file *fp,
 				    char *buf,
 				    loff_t off, size_t count)
 {
+	struct setup_indirect *indirect;
+	struct setup_data *data;
 	int nr, ret = 0;
 	u64 paddr, len;
-	struct setup_data *data;
 	void *p;
 
 	ret = kobj_to_setup_data_nr(kobj, &nr);
@@ -165,10 +193,27 @@ static ssize_t setup_data_data_read(struct file *fp,
 	if (!data)
 		return -ENOMEM;
 
-	if (data->type == SETUP_INDIRECT &&
-	    ((struct setup_indirect *)data->data)->type != SETUP_INDIRECT) {
-		paddr = ((struct setup_indirect *)data->data)->addr;
-		len = ((struct setup_indirect *)data->data)->len;
+	if (data->type == SETUP_INDIRECT) {
+		len = sizeof(*data) + data->len;
+		memunmap(data);
+		data = memremap(paddr, len, MEMREMAP_WB);
+		if (!data)
+			return -ENOMEM;
+
+		indirect = (struct setup_indirect *)data->data;
+
+		if (indirect->type != SETUP_INDIRECT) {
+			paddr = indirect->addr;
+			len = indirect->len;
+		} else {
+			/*
+			 * Even though this is technically undefined, return
+			 * the data as though it is a normal setup_data struct.
+			 * This will at least allow it to be inspected.
+			 */
+			paddr += sizeof(*data);
+			len = data->len;
+		}
 	} else {
 		paddr += sizeof(*data);
 		len = data->len;
diff --git a/arch/x86/kernel/kvm.c b/arch/x86/kernel/kvm.c
index a438217cbfac..d77481ecb0d5 100644
--- a/arch/x86/kernel/kvm.c
+++ b/arch/x86/kernel/kvm.c
@@ -462,19 +462,24 @@ static bool pv_tlb_flush_supported(void)
 {
 	return (kvm_para_has_feature(KVM_FEATURE_PV_TLB_FLUSH) &&
 		!kvm_para_has_hint(KVM_HINTS_REALTIME) &&
-		kvm_para_has_feature(KVM_FEATURE_STEAL_TIME));
+		kvm_para_has_feature(KVM_FEATURE_STEAL_TIME) &&
+		!boot_cpu_has(X86_FEATURE_MWAIT) &&
+		(num_possible_cpus() != 1));
 }
 
 static bool pv_ipi_supported(void)
 {
-	return kvm_para_has_feature(KVM_FEATURE_PV_SEND_IPI);
+	return (kvm_para_has_feature(KVM_FEATURE_PV_SEND_IPI) &&
+	       (num_possible_cpus() != 1));
 }
 
 static bool pv_sched_yield_supported(void)
 {
 	return (kvm_para_has_feature(KVM_FEATURE_PV_SCHED_YIELD) &&
 		!kvm_para_has_hint(KVM_HINTS_REALTIME) &&
-	    kvm_para_has_feature(KVM_FEATURE_STEAL_TIME));
+	    kvm_para_has_feature(KVM_FEATURE_STEAL_TIME) &&
+	    !boot_cpu_has(X86_FEATURE_MWAIT) &&
+	    (num_possible_cpus() != 1));
 }
 
 #define KVM_IPI_CLUSTER_SIZE	(2 * BITS_PER_LONG)
@@ -619,7 +624,7 @@ static void kvm_smp_send_call_func_ipi(const struct cpumask *mask)
 
 	/* Make sure other vCPUs get a chance to run if they need to. */
 	for_each_cpu(cpu, mask) {
-		if (vcpu_is_preempted(cpu)) {
+		if (!idle_cpu(cpu) && vcpu_is_preempted(cpu)) {
 			kvm_hypercall1(KVM_HC_SCHED_YIELD, per_cpu(x86_cpu_to_apicid, cpu));
 			break;
 		}
diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c
index a35cbf9107af..c5caa7311bd8 100644
--- a/arch/x86/kernel/kvmclock.c
+++ b/arch/x86/kernel/kvmclock.c
@@ -239,6 +239,9 @@ static void __init kvmclock_init_mem(void)
 
 static int __init kvm_setup_vsyscall_timeinfo(void)
 {
+	if (!kvm_para_available() || !kvmclock)
+		return 0;
+
 	kvmclock_init_mem();
 
 #ifdef CONFIG_X86_64
diff --git a/arch/x86/kernel/module.c b/arch/x86/kernel/module.c
index 95fa745e310a..96d7c27b7093 100644
--- a/arch/x86/kernel/module.c
+++ b/arch/x86/kernel/module.c
@@ -273,6 +273,14 @@ int module_finalize(const Elf_Ehdr *hdr,
 			retpolines = s;
 	}
 
+	/*
+	 * See alternative_instructions() for the ordering rules between the
+	 * various patching types.
+	 */
+	if (para) {
+		void *pseg = (void *)para->sh_addr;
+		apply_paravirt(pseg, pseg + para->sh_size);
+	}
 	if (retpolines) {
 		void *rseg = (void *)retpolines->sh_addr;
 		apply_retpolines(rseg, rseg + retpolines->sh_size);
@@ -290,11 +298,6 @@ int module_finalize(const Elf_Ehdr *hdr,
 					    tseg, tseg + text->sh_size);
 	}
 
-	if (para) {
-		void *pseg = (void *)para->sh_addr;
-		apply_paravirt(pseg, pseg + para->sh_size);
-	}
-
 	/* make jump label nops */
 	jump_label_apply_nops(me);
 
diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c
index 4bce802d25fb..e73f7df362f5 100644
--- a/arch/x86/kernel/nmi.c
+++ b/arch/x86/kernel/nmi.c
@@ -292,7 +292,6 @@ unknown_nmi_error(unsigned char reason, struct pt_regs *regs)
 	pr_emerg("Uhhuh. NMI received for unknown reason %02x on CPU %d.\n",
 		 reason, smp_processor_id());
 
-	pr_emerg("Do you have a strange power saving mode enabled?\n");
 	if (unknown_nmi_panic || panic_on_unrecovered_nmi)
 		nmi_panic(regs, "NMI: Not continuing");
 
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index 81d8ef036637..e131d71b3cae 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -765,8 +765,11 @@ void stop_this_cpu(void *dummy)
 	 * without the encryption bit, they don't race each other when flushed
 	 * and potentially end up with the wrong entry being committed to
 	 * memory.
+	 *
+	 * Test the CPUID bit directly because the machine might've cleared
+	 * X86_FEATURE_SME due to cmdline options.
 	 */
-	if (boot_cpu_has(X86_FEATURE_SME))
+	if (cpuid_eax(0x8000001f) & BIT(0))
 		native_wbinvd();
 	for (;;) {
 		/*
diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index 6d2244c94799..8d2f2f995539 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -1224,7 +1224,7 @@ static struct user_regset x86_64_regsets[] __ro_after_init = {
 	},
 	[REGSET_FP] = {
 		.core_note_type = NT_PRFPREG,
-		.n = sizeof(struct user_i387_struct) / sizeof(long),
+		.n = sizeof(struct fxregs_state) / sizeof(long),
 		.size = sizeof(long), .align = sizeof(long),
 		.active = regset_xregset_fpregs_active, .regset_get = xfpregs_get, .set = xfpregs_set
 	},
@@ -1271,7 +1271,7 @@ static struct user_regset x86_32_regsets[] __ro_after_init = {
 	},
 	[REGSET_XFP] = {
 		.core_note_type = NT_PRXFPREG,
-		.n = sizeof(struct user32_fxsr_struct) / sizeof(u32),
+		.n = sizeof(struct fxregs_state) / sizeof(u32),
 		.size = sizeof(u32), .align = sizeof(u32),
 		.active = regset_xregset_fpregs_active, .regset_get = xfpregs_get, .set = xfpregs_set
 	},
diff --git a/arch/x86/kernel/resource.c b/arch/x86/kernel/resource.c
index 9ae64f9af956..9b9fb7882c20 100644
--- a/arch/x86/kernel/resource.c
+++ b/arch/x86/kernel/resource.c
@@ -1,5 +1,4 @@
 // SPDX-License-Identifier: GPL-2.0
-#include <linux/dmi.h>
 #include <linux/ioport.h>
 #include <asm/e820/api.h>
 
@@ -24,31 +23,11 @@ static void resource_clip(struct resource *res, resource_size_t start,
 		res->start = end + 1;
 }
 
-/*
- * Some BIOS-es contain a bug where they add addresses which map to
- * system RAM in the PCI host bridge window returned by the ACPI _CRS
- * method, see commit 4dc2287c1805 ("x86: avoid E820 regions when
- * allocating address space"). To avoid this Linux by default excludes
- * E820 reservations when allocating addresses since 2010.
- * In 2019 some systems have shown-up with E820 reservations which cover
- * the entire _CRS returned PCI host bridge window, causing all attempts
- * to assign memory to PCI BARs to fail if Linux uses E820 reservations.
- *
- * Ideally Linux would fully stop using E820 reservations, but then
- * the old systems this was added for will regress.
- * Instead keep the old behavior for old systems, while ignoring the
- * E820 reservations for any systems from now on.
- */
 static void remove_e820_regions(struct resource *avail)
 {
-	int i, year = dmi_get_bios_year();
+	int i;
 	struct e820_entry *entry;
 
-	if (year >= 2018)
-		return;
-
-	pr_info_once("PCI: Removing E820 reservations from host bridge windows\n");
-
 	for (i = 0; i < e820_table->nr_entries; i++) {
 		entry = &e820_table->entries[i];
 
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index f7a132eb794d..90d7e1788c91 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -369,21 +369,41 @@ static void __init parse_setup_data(void)
 
 static void __init memblock_x86_reserve_range_setup_data(void)
 {
+	struct setup_indirect *indirect;
 	struct setup_data *data;
-	u64 pa_data;
+	u64 pa_data, pa_next;
+	u32 len;
 
 	pa_data = boot_params.hdr.setup_data;
 	while (pa_data) {
 		data = early_memremap(pa_data, sizeof(*data));
+		if (!data) {
+			pr_warn("setup: failed to memremap setup_data entry\n");
+			return;
+		}
+
+		len = sizeof(*data);
+		pa_next = data->next;
+
 		memblock_reserve(pa_data, sizeof(*data) + data->len);
 
-		if (data->type == SETUP_INDIRECT &&
-		    ((struct setup_indirect *)data->data)->type != SETUP_INDIRECT)
-			memblock_reserve(((struct setup_indirect *)data->data)->addr,
-					 ((struct setup_indirect *)data->data)->len);
+		if (data->type == SETUP_INDIRECT) {
+			len += data->len;
+			early_memunmap(data, sizeof(*data));
+			data = early_memremap(pa_data, len);
+			if (!data) {
+				pr_warn("setup: failed to memremap indirect setup_data\n");
+				return;
+			}
 
-		pa_data = data->next;
-		early_memunmap(data, sizeof(*data));
+			indirect = (struct setup_indirect *)data->data;
+
+			if (indirect->type != SETUP_INDIRECT)
+				memblock_reserve(indirect->addr, indirect->len);
+		}
+
+		pa_data = pa_next;
+		early_memunmap(data, len);
 	}
 }
 
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 617012f4619f..2ef14772dc04 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -83,10 +83,6 @@
 #include <asm/hw_irq.h>
 #include <asm/stackprotector.h>
 
-#ifdef CONFIG_ACPI_CPPC_LIB
-#include <acpi/cppc_acpi.h>
-#endif
-
 /* representing HT siblings of each logical CPU */
 DEFINE_PER_CPU_READ_MOSTLY(cpumask_var_t, cpu_sibling_map);
 EXPORT_PER_CPU_SYMBOL(cpu_sibling_map);
@@ -155,8 +151,6 @@ static inline void smpboot_restore_warm_reset_vector(void)
 	*((volatile u32 *)phys_to_virt(TRAMPOLINE_PHYS_LOW)) = 0;
 }
 
-static void init_freq_invariance(bool secondary, bool cppc_ready);
-
 /*
  * Report back to the Boot Processor during boot time or to the caller processor
  * during CPU online.
@@ -2097,48 +2091,6 @@ out:
 	return true;
 }
 
-#ifdef CONFIG_ACPI_CPPC_LIB
-static bool amd_set_max_freq_ratio(void)
-{
-	struct cppc_perf_caps perf_caps;
-	u64 highest_perf, nominal_perf;
-	u64 perf_ratio;
-	int rc;
-
-	rc = cppc_get_perf_caps(0, &perf_caps);
-	if (rc) {
-		pr_debug("Could not retrieve perf counters (%d)\n", rc);
-		return false;
-	}
-
-	highest_perf = amd_get_highest_perf();
-	nominal_perf = perf_caps.nominal_perf;
-
-	if (!highest_perf || !nominal_perf) {
-		pr_debug("Could not retrieve highest or nominal performance\n");
-		return false;
-	}
-
-	perf_ratio = div_u64(highest_perf * SCHED_CAPACITY_SCALE, nominal_perf);
-	/* midpoint between max_boost and max_P */
-	perf_ratio = (perf_ratio + SCHED_CAPACITY_SCALE) >> 1;
-	if (!perf_ratio) {
-		pr_debug("Non-zero highest/nominal perf values led to a 0 ratio\n");
-		return false;
-	}
-
-	arch_turbo_freq_ratio = perf_ratio;
-	arch_set_max_freq_ratio(false);
-
-	return true;
-}
-#else
-static bool amd_set_max_freq_ratio(void)
-{
-	return false;
-}
-#endif
-
 static void init_counter_refs(void)
 {
 	u64 aperf, mperf;
@@ -2167,7 +2119,7 @@ static void register_freq_invariance_syscore_ops(void)
 static inline void register_freq_invariance_syscore_ops(void) {}
 #endif
 
-static void init_freq_invariance(bool secondary, bool cppc_ready)
+void init_freq_invariance(bool secondary, bool cppc_ready)
 {
 	bool ret = false;
 
@@ -2187,7 +2139,7 @@ static void init_freq_invariance(bool secondary, bool cppc_ready)
 		if (!cppc_ready) {
 			return;
 		}
-		ret = amd_set_max_freq_ratio();
+		ret = amd_set_max_freq_ratio(&arch_turbo_freq_ratio);
 	}
 
 	if (ret) {
@@ -2200,22 +2152,6 @@ static void init_freq_invariance(bool secondary, bool cppc_ready)
 	}
 }
 
-#ifdef CONFIG_ACPI_CPPC_LIB
-static DEFINE_MUTEX(freq_invariance_lock);
-
-void init_freq_invariance_cppc(void)
-{
-	static bool secondary;
-
-	mutex_lock(&freq_invariance_lock);
-
-	init_freq_invariance(secondary, true);
-	secondary = true;
-
-	mutex_unlock(&freq_invariance_lock);
-}
-#endif
-
 static void disable_freq_invariance_workfn(struct work_struct *work)
 {
 	static_branch_disable(&arch_scale_freq_key);
@@ -2264,8 +2200,4 @@ error:
 	pr_warn("Scheduler frequency invariance went wobbly, disabling!\n");
 	schedule_work(&disable_freq_invariance_work);
 }
-#else
-static inline void init_freq_invariance(bool secondary, bool cppc_ready)
-{
-}
 #endif /* CONFIG_X86_64 */
diff --git a/arch/x86/kernel/stacktrace.c b/arch/x86/kernel/stacktrace.c
index 15b058eefc4e..ee117fcf46ed 100644
--- a/arch/x86/kernel/stacktrace.c
+++ b/arch/x86/kernel/stacktrace.c
@@ -90,7 +90,7 @@ copy_stack_frame(const struct stack_frame_user __user *fp,
 {
 	int ret;
 
-	if (__range_not_ok(fp, sizeof(*frame), TASK_SIZE))
+	if (!__access_ok(fp, sizeof(*frame)))
 		return 0;
 
 	ret = 1;
diff --git a/arch/x86/kernel/topology.c b/arch/x86/kernel/topology.c
index bd83748e2bde..8617d1ed9d31 100644
--- a/arch/x86/kernel/topology.c
+++ b/arch/x86/kernel/topology.c
@@ -154,11 +154,6 @@ static int __init topology_init(void)
 {
 	int i;
 
-#ifdef CONFIG_NUMA
-	for_each_online_node(i)
-		register_one_node(i);
-#endif
-
 	for_each_present_cpu(i)
 		arch_register_cpu(i);
 
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index c9d566dcf89a..2e37862e3a8c 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -39,6 +39,7 @@
 #include <linux/io.h>
 #include <linux/hardirq.h>
 #include <linux/atomic.h>
+#include <linux/ioasid.h>
 
 #include <asm/stacktrace.h>
 #include <asm/processor.h>
@@ -559,6 +560,57 @@ static bool fixup_iopl_exception(struct pt_regs *regs)
 	return true;
 }
 
+/*
+ * The unprivileged ENQCMD instruction generates #GPs if the
+ * IA32_PASID MSR has not been populated.  If possible, populate
+ * the MSR from a PASID previously allocated to the mm.
+ */
+static bool try_fixup_enqcmd_gp(void)
+{
+#ifdef CONFIG_IOMMU_SVA
+	u32 pasid;
+
+	/*
+	 * MSR_IA32_PASID is managed using XSAVE.  Directly
+	 * writing to the MSR is only possible when fpregs
+	 * are valid and the fpstate is not.  This is
+	 * guaranteed when handling a userspace exception
+	 * in *before* interrupts are re-enabled.
+	 */
+	lockdep_assert_irqs_disabled();
+
+	/*
+	 * Hardware without ENQCMD will not generate
+	 * #GPs that can be fixed up here.
+	 */
+	if (!cpu_feature_enabled(X86_FEATURE_ENQCMD))
+		return false;
+
+	pasid = current->mm->pasid;
+
+	/*
+	 * If the mm has not been allocated a
+	 * PASID, the #GP can not be fixed up.
+	 */
+	if (!pasid_valid(pasid))
+		return false;
+
+	/*
+	 * Did this thread already have its PASID activated?
+	 * If so, the #GP must be from something else.
+	 */
+	if (current->pasid_activated)
+		return false;
+
+	wrmsrl(MSR_IA32_PASID, pasid | MSR_IA32_PASID_VALID);
+	current->pasid_activated = 1;
+
+	return true;
+#else
+	return false;
+#endif
+}
+
 DEFINE_IDTENTRY_ERRORCODE(exc_general_protection)
 {
 	char desc[sizeof(GPFSTR) + 50 + 2*sizeof(unsigned long) + 1] = GPFSTR;
@@ -567,6 +619,9 @@ DEFINE_IDTENTRY_ERRORCODE(exc_general_protection)
 	unsigned long gp_addr;
 	int ret;
 
+	if (user_mode(regs) && try_fixup_enqcmd_gp())
+		return;
+
 	cond_local_irq_enable(regs);
 
 	if (static_cpu_has(X86_FEATURE_UMIP)) {
@@ -659,6 +714,7 @@ static bool do_int3(struct pt_regs *regs)
 
 	return res == NOTIFY_STOP;
 }
+NOKPROBE_SYMBOL(do_int3);
 
 static void do_int3_user(struct pt_regs *regs)
 {
diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c
index 7d20c1d34a3c..e84ee5cdbd8c 100644
--- a/arch/x86/kernel/x86_init.c
+++ b/arch/x86/kernel/x86_init.c
@@ -129,6 +129,11 @@ struct x86_cpuinit_ops x86_cpuinit = {
 
 static void default_nmi_init(void) { };
 
+static void enc_status_change_prepare_noop(unsigned long vaddr, int npages, bool enc) { }
+static bool enc_status_change_finish_noop(unsigned long vaddr, int npages, bool enc) { return false; }
+static bool enc_tlb_flush_required_noop(bool enc) { return false; }
+static bool enc_cache_flush_required_noop(void) { return false; }
+
 struct x86_platform_ops x86_platform __ro_after_init = {
 	.calibrate_cpu			= native_calibrate_cpu_early,
 	.calibrate_tsc			= native_calibrate_tsc,
@@ -138,9 +143,16 @@ struct x86_platform_ops x86_platform __ro_after_init = {
 	.is_untracked_pat_range		= is_ISA_range,
 	.nmi_init			= default_nmi_init,
 	.get_nmi_reason			= default_get_nmi_reason,
-	.save_sched_clock_state 	= tsc_save_sched_clock_state,
-	.restore_sched_clock_state 	= tsc_restore_sched_clock_state,
+	.save_sched_clock_state		= tsc_save_sched_clock_state,
+	.restore_sched_clock_state	= tsc_restore_sched_clock_state,
 	.hyper.pin_vcpu			= x86_op_int_noop,
+
+	.guest = {
+		.enc_status_change_prepare = enc_status_change_prepare_noop,
+		.enc_status_change_finish  = enc_status_change_finish_noop,
+		.enc_tlb_flush_required	   = enc_tlb_flush_required_noop,
+		.enc_cache_flush_required  = enc_cache_flush_required_noop,
+	},
 };
 
 EXPORT_SYMBOL_GPL(x86_platform);
diff --git a/arch/x86/kvm/cpuid.c b/arch/x86/kvm/cpuid.c
index 28be02adc669..8bf541b24b4b 100644
--- a/arch/x86/kvm/cpuid.c
+++ b/arch/x86/kvm/cpuid.c
@@ -282,6 +282,7 @@ static void kvm_vcpu_after_set_cpuid(struct kvm_vcpu *vcpu)
 {
 	struct kvm_lapic *apic = vcpu->arch.apic;
 	struct kvm_cpuid_entry2 *best;
+	u64 guest_supported_xcr0;
 
 	best = kvm_find_cpuid_entry(vcpu, 1, 0);
 	if (best && apic) {
@@ -293,9 +294,11 @@ static void kvm_vcpu_after_set_cpuid(struct kvm_vcpu *vcpu)
 		kvm_apic_set_version(vcpu);
 	}
 
-	vcpu->arch.guest_supported_xcr0 =
+	guest_supported_xcr0 =
 		cpuid_get_supported_xcr0(vcpu->arch.cpuid_entries, vcpu->arch.cpuid_nent);
 
+	vcpu->arch.guest_fpu.fpstate->user_xfeatures = guest_supported_xcr0;
+
 	kvm_update_pv_runtime(vcpu);
 
 	vcpu->arch.maxphyaddr = cpuid_query_maxphyaddr(vcpu);
@@ -554,12 +557,13 @@ void kvm_set_cpu_caps(void)
 	);
 
 	kvm_cpu_cap_mask(CPUID_7_0_EBX,
-		F(FSGSBASE) | F(SGX) | F(BMI1) | F(HLE) | F(AVX2) | F(SMEP) |
-		F(BMI2) | F(ERMS) | F(INVPCID) | F(RTM) | 0 /*MPX*/ | F(RDSEED) |
-		F(ADX) | F(SMAP) | F(AVX512IFMA) | F(AVX512F) | F(AVX512PF) |
-		F(AVX512ER) | F(AVX512CD) | F(CLFLUSHOPT) | F(CLWB) | F(AVX512DQ) |
-		F(SHA_NI) | F(AVX512BW) | F(AVX512VL) | 0 /*INTEL_PT*/
-	);
+		F(FSGSBASE) | F(SGX) | F(BMI1) | F(HLE) | F(AVX2) |
+		F(FDP_EXCPTN_ONLY) | F(SMEP) | F(BMI2) | F(ERMS) | F(INVPCID) |
+		F(RTM) | F(ZERO_FCS_FDS) | 0 /*MPX*/ | F(AVX512F) |
+		F(AVX512DQ) | F(RDSEED) | F(ADX) | F(SMAP) | F(AVX512IFMA) |
+		F(CLFLUSHOPT) | F(CLWB) | 0 /*INTEL_PT*/ | F(AVX512PF) |
+		F(AVX512ER) | F(AVX512CD) | F(SHA_NI) | F(AVX512BW) |
+		F(AVX512VL));
 
 	kvm_cpu_cap_mask(CPUID_7_ECX,
 		F(AVX512VBMI) | F(LA57) | F(PKU) | 0 /*OSPKE*/ | F(RDPID) |
@@ -875,7 +879,8 @@ static inline int __do_cpuid_func(struct kvm_cpuid_array *array, u32 function)
 		eax.split.bit_width = cap.bit_width_gp;
 		eax.split.mask_length = cap.events_mask_len;
 
-		edx.split.num_counters_fixed = min(cap.num_counters_fixed, MAX_FIXED_COUNTERS);
+		edx.split.num_counters_fixed =
+			min(cap.num_counters_fixed, KVM_PMC_MAX_FIXED);
 		edx.split.bit_width_fixed = cap.bit_width_fixed;
 		if (cap.version)
 			edx.split.anythread_deprecated = 1;
diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
index 5719d8cfdbd9..50ca1db7247c 100644
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -429,8 +429,23 @@ static int fastop(struct x86_emulate_ctxt *ctxt, fastop_t fop);
 	FOP_END
 
 /* Special case for SETcc - 1 instruction per cc */
+
+/*
+ * Depending on .config the SETcc functions look like:
+ *
+ * SETcc %al   [3 bytes]
+ * RET         [1 byte]
+ * INT3        [1 byte; CONFIG_SLS]
+ *
+ * Which gives possible sizes 4 or 5.  When rounded up to the
+ * next power-of-two alignment they become 4 or 8.
+ */
+#define SETCC_LENGTH	(4 + IS_ENABLED(CONFIG_SLS))
+#define SETCC_ALIGN	(4 << IS_ENABLED(CONFIG_SLS))
+static_assert(SETCC_LENGTH <= SETCC_ALIGN);
+
 #define FOP_SETCC(op) \
-	".align 4 \n\t" \
+	".align " __stringify(SETCC_ALIGN) " \n\t" \
 	".type " #op ", @function \n\t" \
 	#op ": \n\t" \
 	#op " %al \n\t" \
@@ -665,7 +680,7 @@ static inline u8 ctxt_virt_addr_bits(struct x86_emulate_ctxt *ctxt)
 static inline bool emul_is_noncanonical_address(u64 la,
 						struct x86_emulate_ctxt *ctxt)
 {
-	return get_canonical(la, ctxt_virt_addr_bits(ctxt)) != la;
+	return !__is_canonical_address(la, ctxt_virt_addr_bits(ctxt));
 }
 
 /*
@@ -715,7 +730,7 @@ static __always_inline int __linearize(struct x86_emulate_ctxt *ctxt,
 	case X86EMUL_MODE_PROT64:
 		*linear = la;
 		va_bits = ctxt_virt_addr_bits(ctxt);
-		if (get_canonical(la, va_bits) != la)
+		if (!__is_canonical_address(la, va_bits))
 			goto bad;
 
 		*max_size = min_t(u64, ~0u, (1ull << va_bits) - la);
@@ -1047,7 +1062,7 @@ static int em_bsr_c(struct x86_emulate_ctxt *ctxt)
 static __always_inline u8 test_cc(unsigned int condition, unsigned long flags)
 {
 	u8 rc;
-	void (*fop)(void) = (void *)em_setcc + 4 * (condition & 0xf);
+	void (*fop)(void) = (void *)em_setcc + SETCC_ALIGN * (condition & 0xf);
 
 	flags = (flags & EFLAGS_MASK) | X86_EFLAGS_IF;
 	asm("push %[flags]; popf; " CALL_NOSPEC
@@ -5380,8 +5395,13 @@ static int fastop(struct x86_emulate_ctxt *ctxt, fastop_t fop)
 
 void init_decode_cache(struct x86_emulate_ctxt *ctxt)
 {
-	memset(&ctxt->rip_relative, 0,
-	       (void *)&ctxt->modrm - (void *)&ctxt->rip_relative);
+	/* Clear fields that are set conditionally but read without a guard. */
+	ctxt->rip_relative = false;
+	ctxt->rex_prefix = 0;
+	ctxt->lock_prefix = 0;
+	ctxt->rep_prefix = 0;
+	ctxt->regs_valid = 0;
+	ctxt->regs_dirty = 0;
 
 	ctxt->io_read.pos = 0;
 	ctxt->io_read.end = 0;
diff --git a/arch/x86/kvm/kvm_emulate.h b/arch/x86/kvm/kvm_emulate.h
index 39eded2426ff..840ddb4a9302 100644
--- a/arch/x86/kvm/kvm_emulate.h
+++ b/arch/x86/kvm/kvm_emulate.h
@@ -336,11 +336,7 @@ struct x86_emulate_ctxt {
 		fastop_t fop;
 	};
 	int (*check_perm)(struct x86_emulate_ctxt *ctxt);
-	/*
-	 * The following six fields are cleared together,
-	 * the rest are initialized unconditionally in x86_decode_insn
-	 * or elsewhere
-	 */
+
 	bool rip_relative;
 	u8 rex_prefix;
 	u8 lock_prefix;
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 4662469240bc..9322e6340a74 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -1096,14 +1096,8 @@ static int __apic_accept_irq(struct kvm_lapic *apic, int delivery_mode,
 						       apic->regs + APIC_TMR);
 		}
 
-		if (static_call(kvm_x86_deliver_posted_interrupt)(vcpu, vector)) {
-			kvm_lapic_set_irr(vector, apic);
-			kvm_make_request(KVM_REQ_EVENT, vcpu);
-			kvm_vcpu_kick(vcpu);
-		} else {
-			trace_kvm_apicv_accept_irq(vcpu->vcpu_id, delivery_mode,
-						   trig_mode, vector);
-		}
+		static_call(kvm_x86_deliver_interrupt)(apic, delivery_mode,
+						       trig_mode, vector);
 		break;
 
 	case APIC_DM_REMRD:
@@ -2312,7 +2306,12 @@ void kvm_apic_update_apicv(struct kvm_vcpu *vcpu)
 		apic->irr_pending = true;
 		apic->isr_count = 1;
 	} else {
-		apic->irr_pending = (apic_search_irr(apic) != -1);
+		/*
+		 * Don't clear irr_pending, searching the IRR can race with
+		 * updates from the CPU as APICv is still active from hardware's
+		 * perspective.  The flag will be cleared as appropriate when
+		 * KVM injects the interrupt.
+		 */
 		apic->isr_count = count_vectors(apic->regs + APIC_ISR);
 	}
 }
diff --git a/arch/x86/kvm/mmu/mmu.c b/arch/x86/kvm/mmu/mmu.c
index 593093b52395..5628d0ba637e 100644
--- a/arch/x86/kvm/mmu/mmu.c
+++ b/arch/x86/kvm/mmu/mmu.c
@@ -3565,7 +3565,7 @@ set_root_pgd:
 out_unlock:
 	write_unlock(&vcpu->kvm->mmu_lock);
 
-	return 0;
+	return r;
 }
 
 static int mmu_alloc_special_roots(struct kvm_vcpu *vcpu)
@@ -3889,12 +3889,23 @@ static void shadow_page_table_clear_flood(struct kvm_vcpu *vcpu, gva_t addr)
 	walk_shadow_page_lockless_end(vcpu);
 }
 
+static u32 alloc_apf_token(struct kvm_vcpu *vcpu)
+{
+	/* make sure the token value is not 0 */
+	u32 id = vcpu->arch.apf.id;
+
+	if (id << 12 == 0)
+		vcpu->arch.apf.id = 1;
+
+	return (vcpu->arch.apf.id++ << 12) | vcpu->vcpu_id;
+}
+
 static bool kvm_arch_setup_async_pf(struct kvm_vcpu *vcpu, gpa_t cr2_or_gpa,
 				    gfn_t gfn)
 {
 	struct kvm_arch_async_pf arch;
 
-	arch.token = (vcpu->arch.apf.id++ << 12) | vcpu->vcpu_id;
+	arch.token = alloc_apf_token(vcpu);
 	arch.gfn = gfn;
 	arch.direct_map = vcpu->arch.mmu->direct_map;
 	arch.cr3 = vcpu->arch.mmu->get_guest_pgd(vcpu);
diff --git a/arch/x86/kvm/pmu.c b/arch/x86/kvm/pmu.c
index f614f95acc6b..b1a02993782b 100644
--- a/arch/x86/kvm/pmu.c
+++ b/arch/x86/kvm/pmu.c
@@ -95,7 +95,7 @@ static void kvm_perf_overflow(struct perf_event *perf_event,
 }
 
 static void pmc_reprogram_counter(struct kvm_pmc *pmc, u32 type,
-				  unsigned config, bool exclude_user,
+				  u64 config, bool exclude_user,
 				  bool exclude_kernel, bool intr,
 				  bool in_tx, bool in_tx_cp)
 {
@@ -181,7 +181,8 @@ static int cmp_u64(const void *a, const void *b)
 
 void reprogram_gp_counter(struct kvm_pmc *pmc, u64 eventsel)
 {
-	unsigned config, type = PERF_TYPE_RAW;
+	u64 config;
+	u32 type = PERF_TYPE_RAW;
 	struct kvm *kvm = pmc->vcpu->kvm;
 	struct kvm_pmu_event_filter *filter;
 	bool allow_event = true;
@@ -220,7 +221,7 @@ void reprogram_gp_counter(struct kvm_pmc *pmc, u64 eventsel)
 	}
 
 	if (type == PERF_TYPE_RAW)
-		config = eventsel & X86_RAW_EVENT_MASK;
+		config = eventsel & AMD64_RAW_EVENT_MASK;
 
 	if (pmc->current_config == eventsel && pmc_resume_counter(pmc))
 		return;
diff --git a/arch/x86/kvm/pmu.h b/arch/x86/kvm/pmu.h
index 7a7b8d5b775e..9e66fba1d6a3 100644
--- a/arch/x86/kvm/pmu.h
+++ b/arch/x86/kvm/pmu.h
@@ -15,8 +15,6 @@
 #define VMWARE_BACKDOOR_PMC_REAL_TIME		0x10001
 #define VMWARE_BACKDOOR_PMC_APPARENT_TIME	0x10002
 
-#define MAX_FIXED_COUNTERS	3
-
 struct kvm_event_hw_type_mapping {
 	u8 eventsel;
 	u8 unit_mask;
diff --git a/arch/x86/kvm/svm/avic.c b/arch/x86/kvm/svm/avic.c
index 90364d02f22a..fb3e20791338 100644
--- a/arch/x86/kvm/svm/avic.c
+++ b/arch/x86/kvm/svm/avic.c
@@ -27,20 +27,6 @@
 #include "irq.h"
 #include "svm.h"
 
-#define SVM_AVIC_DOORBELL	0xc001011b
-
-#define AVIC_HPA_MASK	~((0xFFFULL << 52) | 0xFFF)
-
-/*
- * 0xff is broadcast, so the max index allowed for physical APIC ID
- * table is 0xfe.  APIC IDs above 0xff are reserved.
- */
-#define AVIC_MAX_PHYSICAL_ID_COUNT	255
-
-#define AVIC_UNACCEL_ACCESS_WRITE_MASK		1
-#define AVIC_UNACCEL_ACCESS_OFFSET_MASK		0xFF0
-#define AVIC_UNACCEL_ACCESS_VECTOR_MASK		0xFFFFFFFF
-
 /* AVIC GATAG is encoded using VM and VCPU IDs */
 #define AVIC_VCPU_ID_BITS		8
 #define AVIC_VCPU_ID_MASK		((1 << AVIC_VCPU_ID_BITS) - 1)
@@ -73,12 +59,6 @@ struct amd_svm_iommu_ir {
 	void *data;		/* Storing pointer to struct amd_ir_data */
 };
 
-enum avic_ipi_failure_cause {
-	AVIC_IPI_FAILURE_INVALID_INT_TYPE,
-	AVIC_IPI_FAILURE_TARGET_NOT_RUNNING,
-	AVIC_IPI_FAILURE_INVALID_TARGET,
-	AVIC_IPI_FAILURE_INVALID_BACKING_PAGE,
-};
 
 /* Note:
  * This function is called from IOMMU driver to notify
@@ -289,6 +269,22 @@ static int avic_init_backing_page(struct kvm_vcpu *vcpu)
 	return 0;
 }
 
+void avic_ring_doorbell(struct kvm_vcpu *vcpu)
+{
+	/*
+	 * Note, the vCPU could get migrated to a different pCPU at any point,
+	 * which could result in signalling the wrong/previous pCPU.  But if
+	 * that happens the vCPU is guaranteed to do a VMRUN (after being
+	 * migrated) and thus will process pending interrupts, i.e. a doorbell
+	 * is not needed (and the spurious one is harmless).
+	 */
+	int cpu = READ_ONCE(vcpu->cpu);
+
+	if (cpu != get_cpu())
+		wrmsrl(MSR_AMD64_SVM_AVIC_DOORBELL, kvm_cpu_get_apicid(cpu));
+	put_cpu();
+}
+
 static void avic_kick_target_vcpus(struct kvm *kvm, struct kvm_lapic *source,
 				   u32 icrl, u32 icrh)
 {
@@ -304,8 +300,13 @@ static void avic_kick_target_vcpus(struct kvm *kvm, struct kvm_lapic *source,
 	kvm_for_each_vcpu(i, vcpu, kvm) {
 		if (kvm_apic_match_dest(vcpu, source, icrl & APIC_SHORT_MASK,
 					GET_APIC_DEST_FIELD(icrh),
-					icrl & APIC_DEST_MASK))
-			kvm_vcpu_wake_up(vcpu);
+					icrl & APIC_DEST_MASK)) {
+			vcpu->arch.apic->irr_pending = true;
+			svm_complete_interrupt_delivery(vcpu,
+							icrl & APIC_MODE_MASK,
+							icrl & APIC_INT_LEVELTRIG,
+							icrl & APIC_VECTOR_MASK);
+		}
 	}
 }
 
@@ -345,8 +346,6 @@ int avic_incomplete_ipi_interception(struct kvm_vcpu *vcpu)
 		avic_kick_target_vcpus(vcpu->kvm, apic, icrl, icrh);
 		break;
 	case AVIC_IPI_FAILURE_INVALID_TARGET:
-		WARN_ONCE(1, "Invalid IPI target: index=%u, vcpu=%d, icr=%#0x:%#0x\n",
-			  index, vcpu->vcpu_id, icrh, icrl);
 		break;
 	case AVIC_IPI_FAILURE_INVALID_BACKING_PAGE:
 		WARN_ONCE(1, "Invalid backing page\n");
@@ -669,52 +668,6 @@ void svm_load_eoi_exitmap(struct kvm_vcpu *vcpu, u64 *eoi_exit_bitmap)
 	return;
 }
 
-int svm_deliver_avic_intr(struct kvm_vcpu *vcpu, int vec)
-{
-	if (!vcpu->arch.apicv_active)
-		return -1;
-
-	kvm_lapic_set_irr(vec, vcpu->arch.apic);
-
-	/*
-	 * Pairs with the smp_mb_*() after setting vcpu->guest_mode in
-	 * vcpu_enter_guest() to ensure the write to the vIRR is ordered before
-	 * the read of guest_mode, which guarantees that either VMRUN will see
-	 * and process the new vIRR entry, or that the below code will signal
-	 * the doorbell if the vCPU is already running in the guest.
-	 */
-	smp_mb__after_atomic();
-
-	/*
-	 * Signal the doorbell to tell hardware to inject the IRQ if the vCPU
-	 * is in the guest.  If the vCPU is not in the guest, hardware will
-	 * automatically process AVIC interrupts at VMRUN.
-	 */
-	if (vcpu->mode == IN_GUEST_MODE) {
-		int cpu = READ_ONCE(vcpu->cpu);
-
-		/*
-		 * Note, the vCPU could get migrated to a different pCPU at any
-		 * point, which could result in signalling the wrong/previous
-		 * pCPU.  But if that happens the vCPU is guaranteed to do a
-		 * VMRUN (after being migrated) and thus will process pending
-		 * interrupts, i.e. a doorbell is not needed (and the spurious
-		 * one is harmless).
-		 */
-		if (cpu != get_cpu())
-			wrmsrl(SVM_AVIC_DOORBELL, kvm_cpu_get_apicid(cpu));
-		put_cpu();
-	} else {
-		/*
-		 * Wake the vCPU if it was blocking.  KVM will then detect the
-		 * pending IRQ when checking if the vCPU has a wake event.
-		 */
-		kvm_vcpu_wake_up(vcpu);
-	}
-
-	return 0;
-}
-
 bool svm_dy_apicv_has_pending_interrupt(struct kvm_vcpu *vcpu)
 {
 	return false;
diff --git a/arch/x86/kvm/svm/nested.c b/arch/x86/kvm/svm/nested.c
index 1218b5a342fc..39d280e7e80e 100644
--- a/arch/x86/kvm/svm/nested.c
+++ b/arch/x86/kvm/svm/nested.c
@@ -1457,18 +1457,6 @@ static int svm_set_nested_state(struct kvm_vcpu *vcpu,
 	    !__nested_vmcb_check_save(vcpu, &save_cached))
 		goto out_free;
 
-	/*
-	 * While the nested guest CR3 is already checked and set by
-	 * KVM_SET_SREGS, it was set when nested state was yet loaded,
-	 * thus MMU might not be initialized correctly.
-	 * Set it again to fix this.
-	 */
-
-	ret = nested_svm_load_cr3(&svm->vcpu, vcpu->arch.cr3,
-				  nested_npt_enabled(svm), false);
-	if (WARN_ON_ONCE(ret))
-		goto out_free;
-
 
 	/*
 	 * All checks done, we can enter guest mode. Userspace provides
@@ -1494,6 +1482,20 @@ static int svm_set_nested_state(struct kvm_vcpu *vcpu,
 
 	svm_switch_vmcb(svm, &svm->nested.vmcb02);
 	nested_vmcb02_prepare_control(svm);
+
+	/*
+	 * While the nested guest CR3 is already checked and set by
+	 * KVM_SET_SREGS, it was set when nested state was yet loaded,
+	 * thus MMU might not be initialized correctly.
+	 * Set it again to fix this.
+	 */
+
+	ret = nested_svm_load_cr3(&svm->vcpu, vcpu->arch.cr3,
+				  nested_npt_enabled(svm), false);
+	if (WARN_ON_ONCE(ret))
+		goto out_free;
+
+
 	kvm_make_request(KVM_REQ_GET_NESTED_STATE_PAGES, vcpu);
 	ret = 0;
 out_free:
diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c
index 6d97629655e3..fd3a00c892c7 100644
--- a/arch/x86/kvm/svm/svm.c
+++ b/arch/x86/kvm/svm/svm.c
@@ -1585,6 +1585,7 @@ void svm_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
 	u64 hcr0 = cr0;
+	bool old_paging = is_paging(vcpu);
 
 #ifdef CONFIG_X86_64
 	if (vcpu->arch.efer & EFER_LME && !vcpu->arch.guest_state_protected) {
@@ -1601,8 +1602,11 @@ void svm_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0)
 #endif
 	vcpu->arch.cr0 = cr0;
 
-	if (!npt_enabled)
+	if (!npt_enabled) {
 		hcr0 |= X86_CR0_PG | X86_CR0_WP;
+		if (old_paging != is_paging(vcpu))
+			svm_set_cr4(vcpu, kvm_read_cr4(vcpu));
+	}
 
 	/*
 	 * re-enable caching here because the QEMU bios
@@ -1646,8 +1650,12 @@ void svm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
 		svm_flush_tlb(vcpu);
 
 	vcpu->arch.cr4 = cr4;
-	if (!npt_enabled)
+	if (!npt_enabled) {
 		cr4 |= X86_CR4_PAE;
+
+		if (!is_paging(vcpu))
+			cr4 &= ~(X86_CR4_SMEP | X86_CR4_SMAP | X86_CR4_PKE);
+	}
 	cr4 |= host_cr4_mce;
 	to_svm(vcpu)->vmcb->save.cr4 = cr4;
 	vmcb_mark_dirty(to_svm(vcpu)->vmcb, VMCB_CR);
@@ -2685,8 +2693,23 @@ static int svm_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr)
 	u64 data = msr->data;
 	switch (ecx) {
 	case MSR_AMD64_TSC_RATIO:
-		if (!msr->host_initiated && !svm->tsc_scaling_enabled)
-			return 1;
+
+		if (!svm->tsc_scaling_enabled) {
+
+			if (!msr->host_initiated)
+				return 1;
+			/*
+			 * In case TSC scaling is not enabled, always
+			 * leave this MSR at the default value.
+			 *
+			 * Due to bug in qemu 6.2.0, it would try to set
+			 * this msr to 0 if tsc scaling is not enabled.
+			 * Ignore this value as well.
+			 */
+			if (data != 0 && data != svm->tsc_ratio_msr)
+				return 1;
+			break;
+		}
 
 		if (data & TSC_RATIO_RSVD)
 			return 1;
@@ -3291,6 +3314,55 @@ static void svm_set_irq(struct kvm_vcpu *vcpu)
 		SVM_EVTINJ_VALID | SVM_EVTINJ_TYPE_INTR;
 }
 
+void svm_complete_interrupt_delivery(struct kvm_vcpu *vcpu, int delivery_mode,
+				     int trig_mode, int vector)
+{
+	/*
+	 * vcpu->arch.apicv_active must be read after vcpu->mode.
+	 * Pairs with smp_store_release in vcpu_enter_guest.
+	 */
+	bool in_guest_mode = (smp_load_acquire(&vcpu->mode) == IN_GUEST_MODE);
+
+	if (!READ_ONCE(vcpu->arch.apicv_active)) {
+		/* Process the interrupt via inject_pending_event */
+		kvm_make_request(KVM_REQ_EVENT, vcpu);
+		kvm_vcpu_kick(vcpu);
+		return;
+	}
+
+	trace_kvm_apicv_accept_irq(vcpu->vcpu_id, delivery_mode, trig_mode, vector);
+	if (in_guest_mode) {
+		/*
+		 * Signal the doorbell to tell hardware to inject the IRQ.  If
+		 * the vCPU exits the guest before the doorbell chimes, hardware
+		 * will automatically process AVIC interrupts at the next VMRUN.
+		 */
+		avic_ring_doorbell(vcpu);
+	} else {
+		/*
+		 * Wake the vCPU if it was blocking.  KVM will then detect the
+		 * pending IRQ when checking if the vCPU has a wake event.
+		 */
+		kvm_vcpu_wake_up(vcpu);
+	}
+}
+
+static void svm_deliver_interrupt(struct kvm_lapic *apic,  int delivery_mode,
+				  int trig_mode, int vector)
+{
+	kvm_lapic_set_irr(vector, apic);
+
+	/*
+	 * Pairs with the smp_mb_*() after setting vcpu->guest_mode in
+	 * vcpu_enter_guest() to ensure the write to the vIRR is ordered before
+	 * the read of guest_mode.  This guarantees that either VMRUN will see
+	 * and process the new vIRR entry, or that svm_complete_interrupt_delivery
+	 * will signal the doorbell if the CPU has already entered the guest.
+	 */
+	smp_mb__after_atomic();
+	svm_complete_interrupt_delivery(apic->vcpu, delivery_mode, trig_mode, vector);
+}
+
 static void svm_update_cr8_intercept(struct kvm_vcpu *vcpu, int tpr, int irr)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
@@ -3338,11 +3410,13 @@ static int svm_nmi_allowed(struct kvm_vcpu *vcpu, bool for_injection)
 	if (svm->nested.nested_run_pending)
 		return -EBUSY;
 
+	if (svm_nmi_blocked(vcpu))
+		return 0;
+
 	/* An NMI must not be injected into L2 if it's supposed to VM-Exit.  */
 	if (for_injection && is_guest_mode(vcpu) && nested_exit_on_nmi(svm))
 		return -EBUSY;
-
-	return !svm_nmi_blocked(vcpu);
+	return 1;
 }
 
 static bool svm_get_nmi_mask(struct kvm_vcpu *vcpu)
@@ -3394,9 +3468,13 @@ bool svm_interrupt_blocked(struct kvm_vcpu *vcpu)
 static int svm_interrupt_allowed(struct kvm_vcpu *vcpu, bool for_injection)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
+
 	if (svm->nested.nested_run_pending)
 		return -EBUSY;
 
+	if (svm_interrupt_blocked(vcpu))
+		return 0;
+
 	/*
 	 * An IRQ must not be injected into L2 if it's supposed to VM-Exit,
 	 * e.g. if the IRQ arrived asynchronously after checking nested events.
@@ -3404,7 +3482,7 @@ static int svm_interrupt_allowed(struct kvm_vcpu *vcpu, bool for_injection)
 	if (for_injection && is_guest_mode(vcpu) && nested_exit_on_intr(svm))
 		return -EBUSY;
 
-	return !svm_interrupt_blocked(vcpu);
+	return 1;
 }
 
 static void svm_enable_irq_window(struct kvm_vcpu *vcpu)
@@ -3615,7 +3693,7 @@ static noinstr void svm_vcpu_enter_exit(struct kvm_vcpu *vcpu)
 	struct vcpu_svm *svm = to_svm(vcpu);
 	unsigned long vmcb_pa = svm->current_vmcb->pa;
 
-	kvm_guest_enter_irqoff();
+	guest_state_enter_irqoff();
 
 	if (sev_es_guest(vcpu->kvm)) {
 		__svm_sev_es_vcpu_run(vmcb_pa);
@@ -3635,7 +3713,7 @@ static noinstr void svm_vcpu_enter_exit(struct kvm_vcpu *vcpu)
 		vmload(__sme_page_pa(sd->save_area));
 	}
 
-	kvm_guest_exit_irqoff();
+	guest_state_exit_irqoff();
 }
 
 static __no_kcsan fastpath_t svm_vcpu_run(struct kvm_vcpu *vcpu)
@@ -4135,11 +4213,14 @@ static int svm_smi_allowed(struct kvm_vcpu *vcpu, bool for_injection)
 	if (svm->nested.nested_run_pending)
 		return -EBUSY;
 
+	if (svm_smi_blocked(vcpu))
+		return 0;
+
 	/* An SMI must not be injected into L2 if it's supposed to VM-Exit.  */
 	if (for_injection && is_guest_mode(vcpu) && nested_exit_on_smi(svm))
 		return -EBUSY;
 
-	return !svm_smi_blocked(vcpu);
+	return 1;
 }
 
 static int svm_enter_smm(struct kvm_vcpu *vcpu, char *smstate)
@@ -4233,11 +4314,18 @@ static int svm_leave_smm(struct kvm_vcpu *vcpu, const char *smstate)
 	 * Enter the nested guest now
 	 */
 
+	vmcb_mark_all_dirty(svm->vmcb01.ptr);
+
 	vmcb12 = map.hva;
 	nested_copy_vmcb_control_to_cache(svm, &vmcb12->control);
 	nested_copy_vmcb_save_to_cache(svm, &vmcb12->save);
 	ret = enter_svm_guest_mode(vcpu, vmcb12_gpa, vmcb12, false);
 
+	if (ret)
+		goto unmap_save;
+
+	svm->nested.nested_run_pending = 1;
+
 unmap_save:
 	kvm_vcpu_unmap(vcpu, &map_save, true);
 unmap_map:
@@ -4545,7 +4633,7 @@ static struct kvm_x86_ops svm_x86_ops __initdata = {
 	.pmu_ops = &amd_pmu_ops,
 	.nested_ops = &svm_nested_ops,
 
-	.deliver_posted_interrupt = svm_deliver_avic_intr,
+	.deliver_interrupt = svm_deliver_interrupt,
 	.dy_apicv_has_pending_interrupt = svm_dy_apicv_has_pending_interrupt,
 	.update_pi_irte = svm_update_pi_irte,
 	.setup_mce = svm_setup_mce,
@@ -4622,6 +4710,7 @@ static __init void svm_set_cpu_caps(void)
 	/* CPUID 0x80000001 and 0x8000000A (SVM features) */
 	if (nested) {
 		kvm_cpu_cap_set(X86_FEATURE_SVM);
+		kvm_cpu_cap_set(X86_FEATURE_VMCBCLEAN);
 
 		if (nrips)
 			kvm_cpu_cap_set(X86_FEATURE_NRIPS);
diff --git a/arch/x86/kvm/svm/svm.h b/arch/x86/kvm/svm/svm.h
index 73525353e424..fa98d6844728 100644
--- a/arch/x86/kvm/svm/svm.h
+++ b/arch/x86/kvm/svm/svm.h
@@ -489,6 +489,8 @@ void svm_set_gif(struct vcpu_svm *svm, bool value);
 int svm_invoke_exit_handler(struct kvm_vcpu *vcpu, u64 exit_code);
 void set_msr_interception(struct kvm_vcpu *vcpu, u32 *msrpm, u32 msr,
 			  int read, int write);
+void svm_complete_interrupt_delivery(struct kvm_vcpu *vcpu, int delivery_mode,
+				     int trig_mode, int vec);
 
 /* nested.c */
 
@@ -556,17 +558,6 @@ extern struct kvm_x86_nested_ops svm_nested_ops;
 
 /* avic.c */
 
-#define AVIC_LOGICAL_ID_ENTRY_GUEST_PHYSICAL_ID_MASK	(0xFF)
-#define AVIC_LOGICAL_ID_ENTRY_VALID_BIT			31
-#define AVIC_LOGICAL_ID_ENTRY_VALID_MASK		(1 << 31)
-
-#define AVIC_PHYSICAL_ID_ENTRY_HOST_PHYSICAL_ID_MASK	(0xFFULL)
-#define AVIC_PHYSICAL_ID_ENTRY_BACKING_PAGE_MASK	(0xFFFFFFFFFFULL << 12)
-#define AVIC_PHYSICAL_ID_ENTRY_IS_RUNNING_MASK		(1ULL << 62)
-#define AVIC_PHYSICAL_ID_ENTRY_VALID_MASK		(1ULL << 63)
-
-#define VMCB_AVIC_APIC_BAR_MASK		0xFFFFFFFFFF000ULL
-
 int avic_ga_log_notifier(u32 ga_tag);
 void avic_vm_destroy(struct kvm *kvm);
 int avic_vm_init(struct kvm *kvm);
@@ -583,12 +574,12 @@ bool svm_check_apicv_inhibit_reasons(ulong bit);
 void svm_load_eoi_exitmap(struct kvm_vcpu *vcpu, u64 *eoi_exit_bitmap);
 void svm_hwapic_irr_update(struct kvm_vcpu *vcpu, int max_irr);
 void svm_hwapic_isr_update(struct kvm_vcpu *vcpu, int max_isr);
-int svm_deliver_avic_intr(struct kvm_vcpu *vcpu, int vec);
 bool svm_dy_apicv_has_pending_interrupt(struct kvm_vcpu *vcpu);
 int svm_update_pi_irte(struct kvm *kvm, unsigned int host_irq,
 		       uint32_t guest_irq, bool set);
 void avic_vcpu_blocking(struct kvm_vcpu *vcpu);
 void avic_vcpu_unblocking(struct kvm_vcpu *vcpu);
+void avic_ring_doorbell(struct kvm_vcpu *vcpu);
 
 /* sev.c */
 
diff --git a/arch/x86/kvm/vmx/nested.c b/arch/x86/kvm/vmx/nested.c
index ba34e94049c7..dc822a1d403d 100644
--- a/arch/x86/kvm/vmx/nested.c
+++ b/arch/x86/kvm/vmx/nested.c
@@ -246,8 +246,7 @@ static void vmx_sync_vmcs_host_state(struct vcpu_vmx *vmx,
 	src = &prev->host_state;
 	dest = &vmx->loaded_vmcs->host_state;
 
-	vmx_set_vmcs_host_state(dest, src->cr3, src->fs_sel, src->gs_sel,
-				src->fs_base, src->gs_base);
+	vmx_set_host_fs_gs(dest, src->fs_sel, src->gs_sel, src->fs_base, src->gs_base);
 	dest->ldt_sel = src->ldt_sel;
 #ifdef CONFIG_X86_64
 	dest->ds_sel = src->ds_sel;
@@ -3056,7 +3055,7 @@ static int nested_vmx_check_guest_state(struct kvm_vcpu *vcpu,
 static int nested_vmx_check_vmentry_hw(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
-	unsigned long cr4;
+	unsigned long cr3, cr4;
 	bool vm_fail;
 
 	if (!nested_early_check)
@@ -3079,6 +3078,12 @@ static int nested_vmx_check_vmentry_hw(struct kvm_vcpu *vcpu)
 	 */
 	vmcs_writel(GUEST_RFLAGS, 0);
 
+	cr3 = __get_current_cr3_fast();
+	if (unlikely(cr3 != vmx->loaded_vmcs->host_state.cr3)) {
+		vmcs_writel(HOST_CR3, cr3);
+		vmx->loaded_vmcs->host_state.cr3 = cr3;
+	}
+
 	cr4 = cr4_read_shadow();
 	if (unlikely(cr4 != vmx->loaded_vmcs->host_state.cr4)) {
 		vmcs_writel(HOST_CR4, cr4);
diff --git a/arch/x86/kvm/vmx/pmu_intel.c b/arch/x86/kvm/vmx/pmu_intel.c
index 466d18fc0c5d..9b26596099a1 100644
--- a/arch/x86/kvm/vmx/pmu_intel.c
+++ b/arch/x86/kvm/vmx/pmu_intel.c
@@ -565,7 +565,7 @@ static void intel_pmu_init(struct kvm_vcpu *vcpu)
 		pmu->gp_counters[i].current_config = 0;
 	}
 
-	for (i = 0; i < INTEL_PMC_MAX_FIXED; i++) {
+	for (i = 0; i < KVM_PMC_MAX_FIXED; i++) {
 		pmu->fixed_counters[i].type = KVM_PMC_FIXED;
 		pmu->fixed_counters[i].vcpu = vcpu;
 		pmu->fixed_counters[i].idx = i + INTEL_PMC_IDX_FIXED;
@@ -591,7 +591,7 @@ static void intel_pmu_reset(struct kvm_vcpu *vcpu)
 		pmc->counter = pmc->eventsel = 0;
 	}
 
-	for (i = 0; i < INTEL_PMC_MAX_FIXED; i++) {
+	for (i = 0; i < KVM_PMC_MAX_FIXED; i++) {
 		pmc = &pmu->fixed_counters[i];
 
 		pmc_stop_counter(pmc);
diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
index aca3ae2a02f3..b730d799c26e 100644
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -1080,14 +1080,9 @@ static void pt_guest_exit(struct vcpu_vmx *vmx)
 		wrmsrl(MSR_IA32_RTIT_CTL, vmx->pt_desc.host.ctl);
 }
 
-void vmx_set_vmcs_host_state(struct vmcs_host_state *host, unsigned long cr3,
-			     u16 fs_sel, u16 gs_sel,
-			     unsigned long fs_base, unsigned long gs_base)
+void vmx_set_host_fs_gs(struct vmcs_host_state *host, u16 fs_sel, u16 gs_sel,
+			unsigned long fs_base, unsigned long gs_base)
 {
-	if (unlikely(cr3 != host->cr3)) {
-		vmcs_writel(HOST_CR3, cr3);
-		host->cr3 = cr3;
-	}
 	if (unlikely(fs_sel != host->fs_sel)) {
 		if (!(fs_sel & 7))
 			vmcs_write16(HOST_FS_SELECTOR, fs_sel);
@@ -1182,9 +1177,7 @@ void vmx_prepare_switch_to_guest(struct kvm_vcpu *vcpu)
 	gs_base = segment_base(gs_sel);
 #endif
 
-	vmx_set_vmcs_host_state(host_state, __get_current_cr3_fast(),
-				fs_sel, gs_sel, fs_base, gs_base);
-
+	vmx_set_host_fs_gs(host_state, fs_sel, gs_sel, fs_base, gs_base);
 	vmx->guest_state_loaded = true;
 }
 
@@ -4041,6 +4034,21 @@ static int vmx_deliver_posted_interrupt(struct kvm_vcpu *vcpu, int vector)
 	return 0;
 }
 
+static void vmx_deliver_interrupt(struct kvm_lapic *apic, int delivery_mode,
+				  int trig_mode, int vector)
+{
+	struct kvm_vcpu *vcpu = apic->vcpu;
+
+	if (vmx_deliver_posted_interrupt(vcpu, vector)) {
+		kvm_lapic_set_irr(vector, apic);
+		kvm_make_request(KVM_REQ_EVENT, vcpu);
+		kvm_vcpu_kick(vcpu);
+	} else {
+		trace_kvm_apicv_accept_irq(vcpu->vcpu_id, delivery_mode,
+					   trig_mode, vector);
+	}
+}
+
 /*
  * Set up the vmcs's constant host-state fields, i.e., host-state fields that
  * will not change in the lifetime of the guest.
@@ -6754,7 +6762,7 @@ static fastpath_t vmx_exit_handlers_fastpath(struct kvm_vcpu *vcpu)
 static noinstr void vmx_vcpu_enter_exit(struct kvm_vcpu *vcpu,
 					struct vcpu_vmx *vmx)
 {
-	kvm_guest_enter_irqoff();
+	guest_state_enter_irqoff();
 
 	/* L1D Flush includes CPU buffer clear to mitigate MDS */
 	if (static_branch_unlikely(&vmx_l1d_should_flush))
@@ -6770,13 +6778,13 @@ static noinstr void vmx_vcpu_enter_exit(struct kvm_vcpu *vcpu,
 
 	vcpu->arch.cr2 = native_read_cr2();
 
-	kvm_guest_exit_irqoff();
+	guest_state_exit_irqoff();
 }
 
 static fastpath_t vmx_vcpu_run(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
-	unsigned long cr4;
+	unsigned long cr3, cr4;
 
 	/* Record the guest's net vcpu time for enforced NMI injections. */
 	if (unlikely(!enable_vnmi &&
@@ -6819,6 +6827,19 @@ static fastpath_t vmx_vcpu_run(struct kvm_vcpu *vcpu)
 		vmcs_writel(GUEST_RIP, vcpu->arch.regs[VCPU_REGS_RIP]);
 	vcpu->arch.regs_dirty = 0;
 
+	/*
+	 * Refresh vmcs.HOST_CR3 if necessary.  This must be done immediately
+	 * prior to VM-Enter, as the kernel may load a new ASID (PCID) any time
+	 * it switches back to the current->mm, which can occur in KVM context
+	 * when switching to a temporary mm to patch kernel code, e.g. if KVM
+	 * toggles a static key while handling a VM-Exit.
+	 */
+	cr3 = __get_current_cr3_fast();
+	if (unlikely(cr3 != vmx->loaded_vmcs->host_state.cr3)) {
+		vmcs_writel(HOST_CR3, cr3);
+		vmx->loaded_vmcs->host_state.cr3 = cr3;
+	}
+
 	cr4 = cr4_read_shadow();
 	if (unlikely(cr4 != vmx->loaded_vmcs->host_state.cr4)) {
 		vmcs_writel(HOST_CR4, cr4);
@@ -7644,6 +7665,7 @@ static int vmx_leave_smm(struct kvm_vcpu *vcpu, const char *smstate)
 		if (ret)
 			return ret;
 
+		vmx->nested.nested_run_pending = 1;
 		vmx->nested.smm.guest_mode = false;
 	}
 	return 0;
@@ -7768,7 +7790,7 @@ static struct kvm_x86_ops vmx_x86_ops __initdata = {
 	.hwapic_isr_update = vmx_hwapic_isr_update,
 	.guest_apic_has_interrupt = vmx_guest_apic_has_interrupt,
 	.sync_pir_to_irr = vmx_sync_pir_to_irr,
-	.deliver_posted_interrupt = vmx_deliver_posted_interrupt,
+	.deliver_interrupt = vmx_deliver_interrupt,
 	.dy_apicv_has_pending_interrupt = pi_has_pending_interrupt,
 
 	.set_tss_addr = vmx_set_tss_addr,
diff --git a/arch/x86/kvm/vmx/vmx.h b/arch/x86/kvm/vmx/vmx.h
index 7f2c82e7f38f..9c6bfcd84008 100644
--- a/arch/x86/kvm/vmx/vmx.h
+++ b/arch/x86/kvm/vmx/vmx.h
@@ -374,9 +374,8 @@ int allocate_vpid(void);
 void free_vpid(int vpid);
 void vmx_set_constant_host_state(struct vcpu_vmx *vmx);
 void vmx_prepare_switch_to_guest(struct kvm_vcpu *vcpu);
-void vmx_set_vmcs_host_state(struct vmcs_host_state *host, unsigned long cr3,
-			     u16 fs_sel, u16 gs_sel,
-			     unsigned long fs_base, unsigned long gs_base);
+void vmx_set_host_fs_gs(struct vmcs_host_state *host, u16 fs_sel, u16 gs_sel,
+			unsigned long fs_base, unsigned long gs_base);
 int vmx_get_cpl(struct kvm_vcpu *vcpu);
 bool vmx_emulation_required(struct kvm_vcpu *vcpu);
 unsigned long vmx_get_rflags(struct kvm_vcpu *vcpu);
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 74b53a16f38a..6db3a506b402 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -90,6 +90,8 @@
 u64 __read_mostly kvm_mce_cap_supported = MCG_CTL_P | MCG_SER_P;
 EXPORT_SYMBOL_GPL(kvm_mce_cap_supported);
 
+#define  ERR_PTR_USR(e)  ((void __user *)ERR_PTR(e))
+
 #define emul_to_vcpu(ctxt) \
 	((struct kvm_vcpu *)(ctxt)->vcpu)
 
@@ -982,6 +984,18 @@ void kvm_load_host_xsave_state(struct kvm_vcpu *vcpu)
 }
 EXPORT_SYMBOL_GPL(kvm_load_host_xsave_state);
 
+static inline u64 kvm_guest_supported_xcr0(struct kvm_vcpu *vcpu)
+{
+	return vcpu->arch.guest_fpu.fpstate->user_xfeatures;
+}
+
+#ifdef CONFIG_X86_64
+static inline u64 kvm_guest_supported_xfd(struct kvm_vcpu *vcpu)
+{
+	return kvm_guest_supported_xcr0(vcpu) & XFEATURE_MASK_USER_DYNAMIC;
+}
+#endif
+
 static int __kvm_set_xcr(struct kvm_vcpu *vcpu, u32 index, u64 xcr)
 {
 	u64 xcr0 = xcr;
@@ -1001,7 +1015,7 @@ static int __kvm_set_xcr(struct kvm_vcpu *vcpu, u32 index, u64 xcr)
 	 * saving.  However, xcr0 bit 0 is always set, even if the
 	 * emulated CPU does not support XSAVE (see kvm_vcpu_reset()).
 	 */
-	valid_bits = vcpu->arch.guest_supported_xcr0 | XFEATURE_MASK_FP;
+	valid_bits = kvm_guest_supported_xcr0(vcpu) | XFEATURE_MASK_FP;
 	if (xcr0 & ~valid_bits)
 		return 1;
 
@@ -1735,7 +1749,7 @@ static int __kvm_set_msr(struct kvm_vcpu *vcpu, u32 index, u64 data,
 		 * value, and that something deterministic happens if the guest
 		 * invokes 64-bit SYSENTER.
 		 */
-		data = get_canonical(data, vcpu_virt_addr_bits(vcpu));
+		data = __canonical_address(data, vcpu_virt_addr_bits(vcpu));
 		break;
 	case MSR_TSC_AUX:
 		if (!kvm_is_supported_user_return_msr(MSR_TSC_AUX))
@@ -2349,10 +2363,12 @@ static u64 compute_guest_tsc(struct kvm_vcpu *vcpu, s64 kernel_ns)
 	return tsc;
 }
 
+#ifdef CONFIG_X86_64
 static inline int gtod_is_based_on_tsc(int mode)
 {
 	return mode == VDSO_CLOCKMODE_TSC || mode == VDSO_CLOCKMODE_HVCLOCK;
 }
+#endif
 
 static void kvm_track_tsc_matching(struct kvm_vcpu *vcpu)
 {
@@ -3704,8 +3720,7 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 		    !guest_cpuid_has(vcpu, X86_FEATURE_XFD))
 			return 1;
 
-		if (data & ~(XFEATURE_MASK_USER_DYNAMIC &
-			     vcpu->arch.guest_supported_xcr0))
+		if (data & ~kvm_guest_supported_xfd(vcpu))
 			return 1;
 
 		fpu_update_guest_xfd(&vcpu->arch.guest_fpu, data);
@@ -3715,8 +3730,7 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 		    !guest_cpuid_has(vcpu, X86_FEATURE_XFD))
 			return 1;
 
-		if (data & ~(XFEATURE_MASK_USER_DYNAMIC &
-			     vcpu->arch.guest_supported_xcr0))
+		if (data & ~kvm_guest_supported_xfd(vcpu))
 			return 1;
 
 		vcpu->arch.guest_fpu.xfd_err = data;
@@ -4231,6 +4245,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
 	case KVM_CAP_EXIT_ON_EMULATION_FAILURE:
 	case KVM_CAP_VCPU_ATTRIBUTES:
 	case KVM_CAP_SYS_ATTRIBUTES:
+	case KVM_CAP_ENABLE_CAP:
 		r = 1;
 		break;
 	case KVM_CAP_EXIT_HYPERCALL:
@@ -4340,7 +4355,7 @@ static inline void __user *kvm_get_attr_addr(struct kvm_device_attr *attr)
 	void __user *uaddr = (void __user*)(unsigned long)attr->addr;
 
 	if ((u64)(unsigned long)uaddr != attr->addr)
-		return ERR_PTR(-EFAULT);
+		return ERR_PTR_USR(-EFAULT);
 	return uaddr;
 }
 
@@ -6514,7 +6529,7 @@ static void kvm_init_msr_list(void)
 	u32 dummy[2];
 	unsigned i;
 
-	BUILD_BUG_ON_MSG(INTEL_PMC_MAX_FIXED != 4,
+	BUILD_BUG_ON_MSG(KVM_PMC_MAX_FIXED != 3,
 			 "Please update the fixed PMCs in msrs_to_saved_all[]");
 
 	perf_get_x86_pmu_capability(&x86_pmu);
@@ -8838,7 +8853,7 @@ int kvm_arch_init(void *opaque)
 	}
 
 	if (pi_inject_timer == -1)
-		pi_inject_timer = housekeeping_enabled(HK_FLAG_TIMER);
+		pi_inject_timer = housekeeping_enabled(HK_TYPE_TIMER);
 #ifdef CONFIG_X86_64
 	pvclock_gtod_register_notifier(&pvclock_gtod_notifier);
 
@@ -8940,6 +8955,13 @@ static int kvm_pv_clock_pairing(struct kvm_vcpu *vcpu, gpa_t paddr,
 	if (clock_type != KVM_CLOCK_PAIRING_WALLCLOCK)
 		return -KVM_EOPNOTSUPP;
 
+	/*
+	 * When tsc is in permanent catchup mode guests won't be able to use
+	 * pvclock_read_retry loop to get consistent view of pvclock
+	 */
+	if (vcpu->arch.tsc_always_catchup)
+		return -KVM_EOPNOTSUPP;
+
 	if (!kvm_get_walltime_and_clockread(&ts, &cycle))
 		return -KVM_EOPNOTSUPP;
 
@@ -9158,6 +9180,7 @@ static int dm_request_for_irq_injection(struct kvm_vcpu *vcpu)
 		likely(!pic_in_kernel(vcpu->kvm));
 }
 
+/* Called within kvm->srcu read side.  */
 static void post_kvm_run_save(struct kvm_vcpu *vcpu)
 {
 	struct kvm_run *kvm_run = vcpu->run;
@@ -9166,16 +9189,9 @@ static void post_kvm_run_save(struct kvm_vcpu *vcpu)
 	kvm_run->cr8 = kvm_get_cr8(vcpu);
 	kvm_run->apic_base = kvm_get_apic_base(vcpu);
 
-	/*
-	 * The call to kvm_ready_for_interrupt_injection() may end up in
-	 * kvm_xen_has_interrupt() which may require the srcu lock to be
-	 * held, to protect against changes in the vcpu_info address.
-	 */
-	vcpu->srcu_idx = srcu_read_lock(&vcpu->kvm->srcu);
 	kvm_run->ready_for_interrupt_injection =
 		pic_in_kernel(vcpu->kvm) ||
 		kvm_vcpu_ready_for_interrupt_injection(vcpu);
-	srcu_read_unlock(&vcpu->kvm->srcu, vcpu->srcu_idx);
 
 	if (is_smm(vcpu))
 		kvm_run->flags |= KVM_RUN_X86_SMM;
@@ -9793,6 +9809,7 @@ void __kvm_request_immediate_exit(struct kvm_vcpu *vcpu)
 EXPORT_SYMBOL_GPL(__kvm_request_immediate_exit);
 
 /*
+ * Called within kvm->srcu read side.
  * Returns 1 to let vcpu_run() continue the guest execution loop without
  * exiting to the userspace.  Otherwise, the value will be returned to the
  * userspace.
@@ -9981,7 +9998,9 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
 	 * result in virtual interrupt delivery.
 	 */
 	local_irq_disable();
-	vcpu->mode = IN_GUEST_MODE;
+
+	/* Store vcpu->apicv_active before vcpu->mode.  */
+	smp_store_release(&vcpu->mode, IN_GUEST_MODE);
 
 	srcu_read_unlock(&vcpu->kvm->srcu, vcpu->srcu_idx);
 
@@ -10041,6 +10060,8 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
 		set_debugreg(0, 7);
 	}
 
+	guest_timing_enter_irqoff();
+
 	for (;;) {
 		/*
 		 * Assert that vCPU vs. VM APICv state is consistent.  An APICv
@@ -10125,7 +10146,7 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
 	 * of accounting via context tracking, but the loss of accuracy is
 	 * acceptable for all known use cases.
 	 */
-	vtime_account_guest_exit();
+	guest_timing_exit_irqoff();
 
 	if (lapic_in_kernel(vcpu)) {
 		s64 delta = vcpu->arch.apic->lapic_timer.advance_expire_delta;
@@ -10167,6 +10188,7 @@ out:
 	return r;
 }
 
+/* Called within kvm->srcu read side.  */
 static inline int vcpu_block(struct kvm *kvm, struct kvm_vcpu *vcpu)
 {
 	bool hv_timer;
@@ -10226,12 +10248,12 @@ static inline bool kvm_vcpu_running(struct kvm_vcpu *vcpu)
 		!vcpu->arch.apf.halted);
 }
 
+/* Called within kvm->srcu read side.  */
 static int vcpu_run(struct kvm_vcpu *vcpu)
 {
 	int r;
 	struct kvm *kvm = vcpu->kvm;
 
-	vcpu->srcu_idx = srcu_read_lock(&kvm->srcu);
 	vcpu->arch.l1tf_flush_l1d = true;
 
 	for (;;) {
@@ -10259,14 +10281,12 @@ static int vcpu_run(struct kvm_vcpu *vcpu)
 		if (__xfer_to_guest_mode_work_pending()) {
 			srcu_read_unlock(&kvm->srcu, vcpu->srcu_idx);
 			r = xfer_to_guest_mode_handle_work(vcpu);
+			vcpu->srcu_idx = srcu_read_lock(&kvm->srcu);
 			if (r)
 				return r;
-			vcpu->srcu_idx = srcu_read_lock(&kvm->srcu);
 		}
 	}
 
-	srcu_read_unlock(&kvm->srcu, vcpu->srcu_idx);
-
 	return r;
 }
 
@@ -10372,6 +10392,7 @@ static void kvm_put_guest_fpu(struct kvm_vcpu *vcpu)
 int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu)
 {
 	struct kvm_run *kvm_run = vcpu->run;
+	struct kvm *kvm = vcpu->kvm;
 	int r;
 
 	vcpu_load(vcpu);
@@ -10379,6 +10400,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu)
 	kvm_run->flags = 0;
 	kvm_load_guest_fpu(vcpu);
 
+	vcpu->srcu_idx = srcu_read_lock(&vcpu->kvm->srcu);
 	if (unlikely(vcpu->arch.mp_state == KVM_MP_STATE_UNINITIALIZED)) {
 		if (kvm_run->immediate_exit) {
 			r = -EINTR;
@@ -10389,7 +10411,11 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu)
 		 * use before KVM has ever run the vCPU.
 		 */
 		WARN_ON_ONCE(kvm_lapic_hv_timer_in_use(vcpu));
+
+		srcu_read_unlock(&kvm->srcu, vcpu->srcu_idx);
 		kvm_vcpu_block(vcpu);
+		vcpu->srcu_idx = srcu_read_lock(&kvm->srcu);
+
 		if (kvm_apic_accept_events(vcpu) < 0) {
 			r = 0;
 			goto out;
@@ -10449,8 +10475,9 @@ out:
 	if (kvm_run->kvm_valid_regs)
 		store_regs(vcpu);
 	post_kvm_run_save(vcpu);
-	kvm_sigset_deactivate(vcpu);
+	srcu_read_unlock(&kvm->srcu, vcpu->srcu_idx);
 
+	kvm_sigset_deactivate(vcpu);
 	vcpu_put(vcpu);
 	return r;
 }
@@ -11639,8 +11666,6 @@ void kvm_arch_sync_events(struct kvm *kvm)
 	kvm_free_pit(kvm);
 }
 
-#define  ERR_PTR_USR(e)  ((void __user *)ERR_PTR(e))
-
 /**
  * __x86_set_memory_region: Setup KVM internal memory slot
  *
diff --git a/arch/x86/kvm/x86.h b/arch/x86/kvm/x86.h
index 635b75f9e145..f11d945ac41f 100644
--- a/arch/x86/kvm/x86.h
+++ b/arch/x86/kvm/x86.h
@@ -10,51 +10,6 @@
 
 void kvm_spurious_fault(void);
 
-static __always_inline void kvm_guest_enter_irqoff(void)
-{
-	/*
-	 * VMENTER enables interrupts (host state), but the kernel state is
-	 * interrupts disabled when this is invoked. Also tell RCU about
-	 * it. This is the same logic as for exit_to_user_mode().
-	 *
-	 * This ensures that e.g. latency analysis on the host observes
-	 * guest mode as interrupt enabled.
-	 *
-	 * guest_enter_irqoff() informs context tracking about the
-	 * transition to guest mode and if enabled adjusts RCU state
-	 * accordingly.
-	 */
-	instrumentation_begin();
-	trace_hardirqs_on_prepare();
-	lockdep_hardirqs_on_prepare(CALLER_ADDR0);
-	instrumentation_end();
-
-	guest_enter_irqoff();
-	lockdep_hardirqs_on(CALLER_ADDR0);
-}
-
-static __always_inline void kvm_guest_exit_irqoff(void)
-{
-	/*
-	 * VMEXIT disables interrupts (host state), but tracing and lockdep
-	 * have them in state 'on' as recorded before entering guest mode.
-	 * Same as enter_from_user_mode().
-	 *
-	 * context_tracking_guest_exit() restores host context and reinstates
-	 * RCU if enabled and required.
-	 *
-	 * This needs to be done immediately after VM-Exit, before any code
-	 * that might contain tracepoints or call out to the greater world,
-	 * e.g. before x86_spec_ctrl_restore_host().
-	 */
-	lockdep_hardirqs_off(CALLER_ADDR0);
-	context_tracking_guest_exit();
-
-	instrumentation_begin();
-	trace_hardirqs_off_finish();
-	instrumentation_end();
-}
-
 #define KVM_NESTED_VMENTER_CONSISTENCY_CHECK(consistency_check)		\
 ({									\
 	bool failed = (consistency_check);				\
@@ -211,14 +166,9 @@ static inline u8 vcpu_virt_addr_bits(struct kvm_vcpu *vcpu)
 	return kvm_read_cr4_bits(vcpu, X86_CR4_LA57) ? 57 : 48;
 }
 
-static inline u64 get_canonical(u64 la, u8 vaddr_bits)
-{
-	return ((int64_t)la << (64 - vaddr_bits)) >> (64 - vaddr_bits);
-}
-
 static inline bool is_noncanonical_address(u64 la, struct kvm_vcpu *vcpu)
 {
-	return get_canonical(la, vcpu_virt_addr_bits(vcpu)) != la;
+	return !__is_canonical_address(la, vcpu_virt_addr_bits(vcpu));
 }
 
 static inline void vcpu_cache_mmio_info(struct kvm_vcpu *vcpu,
diff --git a/arch/x86/kvm/xen.c b/arch/x86/kvm/xen.c
index bad57535fad0..74be1fda58e3 100644
--- a/arch/x86/kvm/xen.c
+++ b/arch/x86/kvm/xen.c
@@ -133,32 +133,57 @@ static void kvm_xen_update_runstate(struct kvm_vcpu *v, int state)
 void kvm_xen_update_runstate_guest(struct kvm_vcpu *v, int state)
 {
 	struct kvm_vcpu_xen *vx = &v->arch.xen;
+	struct gfn_to_hva_cache *ghc = &vx->runstate_cache;
+	struct kvm_memslots *slots = kvm_memslots(v->kvm);
+	bool atomic = (state == RUNSTATE_runnable);
 	uint64_t state_entry_time;
-	unsigned int offset;
+	int __user *user_state;
+	uint64_t __user *user_times;
 
 	kvm_xen_update_runstate(v, state);
 
 	if (!vx->runstate_set)
 		return;
 
-	BUILD_BUG_ON(sizeof(struct compat_vcpu_runstate_info) != 0x2c);
+	if (unlikely(slots->generation != ghc->generation || kvm_is_error_hva(ghc->hva)) &&
+	    kvm_gfn_to_hva_cache_init(v->kvm, ghc, ghc->gpa, ghc->len))
+		return;
+
+	/* We made sure it fits in a single page */
+	BUG_ON(!ghc->memslot);
+
+	if (atomic)
+		pagefault_disable();
 
-	offset = offsetof(struct compat_vcpu_runstate_info, state_entry_time);
-#ifdef CONFIG_X86_64
 	/*
-	 * The only difference is alignment of uint64_t in 32-bit.
-	 * So the first field 'state' is accessed directly using
-	 * offsetof() (where its offset happens to be zero), while the
-	 * remaining fields which are all uint64_t, start at 'offset'
-	 * which we tweak here by adding 4.
+	 * The only difference between 32-bit and 64-bit versions of the
+	 * runstate struct us the alignment of uint64_t in 32-bit, which
+	 * means that the 64-bit version has an additional 4 bytes of
+	 * padding after the first field 'state'.
+	 *
+	 * So we use 'int __user *user_state' to point to the state field,
+	 * and 'uint64_t __user *user_times' for runstate_entry_time. So
+	 * the actual array of time[] in each state starts at user_times[1].
 	 */
+	BUILD_BUG_ON(offsetof(struct vcpu_runstate_info, state) != 0);
+	BUILD_BUG_ON(offsetof(struct compat_vcpu_runstate_info, state) != 0);
+	user_state = (int __user *)ghc->hva;
+
+	BUILD_BUG_ON(sizeof(struct compat_vcpu_runstate_info) != 0x2c);
+
+	user_times = (uint64_t __user *)(ghc->hva +
+					 offsetof(struct compat_vcpu_runstate_info,
+						  state_entry_time));
+#ifdef CONFIG_X86_64
 	BUILD_BUG_ON(offsetof(struct vcpu_runstate_info, state_entry_time) !=
 		     offsetof(struct compat_vcpu_runstate_info, state_entry_time) + 4);
 	BUILD_BUG_ON(offsetof(struct vcpu_runstate_info, time) !=
 		     offsetof(struct compat_vcpu_runstate_info, time) + 4);
 
 	if (v->kvm->arch.xen.long_mode)
-		offset = offsetof(struct vcpu_runstate_info, state_entry_time);
+		user_times = (uint64_t __user *)(ghc->hva +
+						 offsetof(struct vcpu_runstate_info,
+							  state_entry_time));
 #endif
 	/*
 	 * First write the updated state_entry_time at the appropriate
@@ -172,10 +197,8 @@ void kvm_xen_update_runstate_guest(struct kvm_vcpu *v, int state)
 	BUILD_BUG_ON(sizeof_field(struct compat_vcpu_runstate_info, state_entry_time) !=
 		     sizeof(state_entry_time));
 
-	if (kvm_write_guest_offset_cached(v->kvm, &v->arch.xen.runstate_cache,
-					  &state_entry_time, offset,
-					  sizeof(state_entry_time)))
-		return;
+	if (__put_user(state_entry_time, user_times))
+		goto out;
 	smp_wmb();
 
 	/*
@@ -189,11 +212,8 @@ void kvm_xen_update_runstate_guest(struct kvm_vcpu *v, int state)
 	BUILD_BUG_ON(sizeof_field(struct compat_vcpu_runstate_info, state) !=
 		     sizeof(vx->current_runstate));
 
-	if (kvm_write_guest_offset_cached(v->kvm, &v->arch.xen.runstate_cache,
-					  &vx->current_runstate,
-					  offsetof(struct vcpu_runstate_info, state),
-					  sizeof(vx->current_runstate)))
-		return;
+	if (__put_user(vx->current_runstate, user_state))
+		goto out;
 
 	/*
 	 * Write the actual runstate times immediately after the
@@ -208,24 +228,23 @@ void kvm_xen_update_runstate_guest(struct kvm_vcpu *v, int state)
 	BUILD_BUG_ON(sizeof_field(struct vcpu_runstate_info, time) !=
 		     sizeof(vx->runstate_times));
 
-	if (kvm_write_guest_offset_cached(v->kvm, &v->arch.xen.runstate_cache,
-					  &vx->runstate_times[0],
-					  offset + sizeof(u64),
-					  sizeof(vx->runstate_times)))
-		return;
-
+	if (__copy_to_user(user_times + 1, vx->runstate_times, sizeof(vx->runstate_times)))
+		goto out;
 	smp_wmb();
 
 	/*
 	 * Finally, clear the XEN_RUNSTATE_UPDATE bit in the guest's
 	 * runstate_entry_time field.
 	 */
-
 	state_entry_time &= ~XEN_RUNSTATE_UPDATE;
-	if (kvm_write_guest_offset_cached(v->kvm, &v->arch.xen.runstate_cache,
-					  &state_entry_time, offset,
-					  sizeof(state_entry_time)))
-		return;
+	__put_user(state_entry_time, user_times);
+	smp_wmb();
+
+ out:
+	mark_page_dirty_in_slot(v->kvm, ghc->memslot, ghc->gpa >> PAGE_SHIFT);
+
+	if (atomic)
+		pagefault_enable();
 }
 
 int __kvm_xen_has_interrupt(struct kvm_vcpu *v)
@@ -443,6 +462,12 @@ int kvm_xen_vcpu_set_attr(struct kvm_vcpu *vcpu, struct kvm_xen_vcpu_attr *data)
 			break;
 		}
 
+		/* It must fit within a single page */
+		if ((data->u.gpa & ~PAGE_MASK) + sizeof(struct vcpu_info) > PAGE_SIZE) {
+			r = -EINVAL;
+			break;
+		}
+
 		r = kvm_gfn_to_hva_cache_init(vcpu->kvm,
 					      &vcpu->arch.xen.vcpu_info_cache,
 					      data->u.gpa,
@@ -460,6 +485,12 @@ int kvm_xen_vcpu_set_attr(struct kvm_vcpu *vcpu, struct kvm_xen_vcpu_attr *data)
 			break;
 		}
 
+		/* It must fit within a single page */
+		if ((data->u.gpa & ~PAGE_MASK) + sizeof(struct pvclock_vcpu_time_info) > PAGE_SIZE) {
+			r = -EINVAL;
+			break;
+		}
+
 		r = kvm_gfn_to_hva_cache_init(vcpu->kvm,
 					      &vcpu->arch.xen.vcpu_time_info_cache,
 					      data->u.gpa,
@@ -481,6 +512,12 @@ int kvm_xen_vcpu_set_attr(struct kvm_vcpu *vcpu, struct kvm_xen_vcpu_attr *data)
 			break;
 		}
 
+		/* It must fit within a single page */
+		if ((data->u.gpa & ~PAGE_MASK) + sizeof(struct vcpu_runstate_info) > PAGE_SIZE) {
+			r = -EINVAL;
+			break;
+		}
+
 		r = kvm_gfn_to_hva_cache_init(vcpu->kvm,
 					      &vcpu->arch.xen.runstate_cache,
 					      data->u.gpa,
diff --git a/arch/x86/lib/memcpy_64.S b/arch/x86/lib/memcpy_64.S
index 59cf2343f3d9..d0d7b9bc6cad 100644
--- a/arch/x86/lib/memcpy_64.S
+++ b/arch/x86/lib/memcpy_64.S
@@ -27,8 +27,7 @@
  * Output:
  * rax original destination
  */
-SYM_FUNC_START_ALIAS(__memcpy)
-SYM_FUNC_START_WEAK(memcpy)
+SYM_FUNC_START(__memcpy)
 	ALTERNATIVE_2 "jmp memcpy_orig", "", X86_FEATURE_REP_GOOD, \
 		      "jmp memcpy_erms", X86_FEATURE_ERMS
 
@@ -40,11 +39,12 @@ SYM_FUNC_START_WEAK(memcpy)
 	movl %edx, %ecx
 	rep movsb
 	RET
-SYM_FUNC_END(memcpy)
-SYM_FUNC_END_ALIAS(__memcpy)
-EXPORT_SYMBOL(memcpy)
+SYM_FUNC_END(__memcpy)
 EXPORT_SYMBOL(__memcpy)
 
+SYM_FUNC_ALIAS_WEAK(memcpy, __memcpy)
+EXPORT_SYMBOL(memcpy)
+
 /*
  * memcpy_erms() - enhanced fast string memcpy. This is faster and
  * simpler than memcpy. Use memcpy_erms when possible.
diff --git a/arch/x86/lib/memmove_64.S b/arch/x86/lib/memmove_64.S
index 50ea390df712..d83cba364e31 100644
--- a/arch/x86/lib/memmove_64.S
+++ b/arch/x86/lib/memmove_64.S
@@ -24,7 +24,6 @@
  * Output:
  * rax: dest
  */
-SYM_FUNC_START_WEAK(memmove)
 SYM_FUNC_START(__memmove)
 
 	mov %rdi, %rax
@@ -207,6 +206,7 @@ SYM_FUNC_START(__memmove)
 13:
 	RET
 SYM_FUNC_END(__memmove)
-SYM_FUNC_END_ALIAS(memmove)
 EXPORT_SYMBOL(__memmove)
+
+SYM_FUNC_ALIAS_WEAK(memmove, __memmove)
 EXPORT_SYMBOL(memmove)
diff --git a/arch/x86/lib/memset_64.S b/arch/x86/lib/memset_64.S
index d624f2bc42f1..fc9ffd3ff3b2 100644
--- a/arch/x86/lib/memset_64.S
+++ b/arch/x86/lib/memset_64.S
@@ -17,7 +17,6 @@
  *
  * rax   original destination
  */
-SYM_FUNC_START_WEAK(memset)
 SYM_FUNC_START(__memset)
 	/*
 	 * Some CPUs support enhanced REP MOVSB/STOSB feature. It is recommended
@@ -42,10 +41,11 @@ SYM_FUNC_START(__memset)
 	movq %r9,%rax
 	RET
 SYM_FUNC_END(__memset)
-SYM_FUNC_END_ALIAS(memset)
-EXPORT_SYMBOL(memset)
 EXPORT_SYMBOL(__memset)
 
+SYM_FUNC_ALIAS_WEAK(memset, __memset)
+EXPORT_SYMBOL(memset)
+
 /*
  * ISO C memset - set a memory block to a byte value. This function uses
  * enhanced rep stosb to override the fast string function.
diff --git a/arch/x86/lib/retpoline.S b/arch/x86/lib/retpoline.S
index 89b3fb244e15..afbdda539b80 100644
--- a/arch/x86/lib/retpoline.S
+++ b/arch/x86/lib/retpoline.S
@@ -34,7 +34,7 @@ SYM_INNER_LABEL(__x86_indirect_thunk_\reg, SYM_L_GLOBAL)
 
 	ALTERNATIVE_2 __stringify(ANNOTATE_RETPOLINE_SAFE; jmp *%\reg), \
 		      __stringify(RETPOLINE \reg), X86_FEATURE_RETPOLINE, \
-		      __stringify(lfence; ANNOTATE_RETPOLINE_SAFE; jmp *%\reg; int3), X86_FEATURE_RETPOLINE_AMD
+		      __stringify(lfence; ANNOTATE_RETPOLINE_SAFE; jmp *%\reg; int3), X86_FEATURE_RETPOLINE_LFENCE
 
 .endm
 
diff --git a/arch/x86/lib/usercopy.c b/arch/x86/lib/usercopy.c
index c3e8a62ca561..ad0139d25401 100644
--- a/arch/x86/lib/usercopy.c
+++ b/arch/x86/lib/usercopy.c
@@ -32,7 +32,7 @@ copy_from_user_nmi(void *to, const void __user *from, unsigned long n)
 {
 	unsigned long ret;
 
-	if (__range_not_ok(from, n, TASK_SIZE))
+	if (!__access_ok(from, n))
 		return n;
 
 	if (!nmi_uaccess_okay())
diff --git a/arch/x86/lib/x86-opcode-map.txt b/arch/x86/lib/x86-opcode-map.txt
index ec31f5b60323..d12d1358f96d 100644
--- a/arch/x86/lib/x86-opcode-map.txt
+++ b/arch/x86/lib/x86-opcode-map.txt
@@ -690,7 +690,10 @@ AVXcode: 2
 45: vpsrlvd/q Vx,Hx,Wx (66),(v)
 46: vpsravd Vx,Hx,Wx (66),(v) | vpsravd/q Vx,Hx,Wx (66),(evo)
 47: vpsllvd/q Vx,Hx,Wx (66),(v)
-# Skip 0x48-0x4b
+# Skip 0x48
+49: TILERELEASE (v1),(000),(11B) | LDTILECFG Mtc (v1)(000) | STTILECFG Mtc (66),(v1),(000) | TILEZERO Vt (F2),(v1),(11B)
+# Skip 0x4a
+4b: TILELOADD Vt,Wsm (F2),(v1) | TILELOADDT1 Vt,Wsm (66),(v1) | TILESTORED Wsm,Vt (F3),(v)
 4c: vrcp14ps/d Vpd,Wpd (66),(ev)
 4d: vrcp14ss/d Vsd,Hpd,Wsd (66),(ev)
 4e: vrsqrt14ps/d Vpd,Wpd (66),(ev)
@@ -705,7 +708,10 @@ AVXcode: 2
 59: vpbroadcastq Vx,Wx (66),(v) | vbroadcasti32x2 Vx,Wx (66),(evo)
 5a: vbroadcasti128 Vqq,Mdq (66),(v) | vbroadcasti32x4/64x2 Vx,Wx (66),(evo)
 5b: vbroadcasti32x8/64x4 Vqq,Mdq (66),(ev)
-# Skip 0x5c-0x61
+5c: TDPBF16PS Vt,Wt,Ht (F3),(v1)
+# Skip 0x5d
+5e: TDPBSSD Vt,Wt,Ht (F2),(v1) | TDPBSUD Vt,Wt,Ht (F3),(v1) | TDPBUSD Vt,Wt,Ht (66),(v1) | TDPBUUD Vt,Wt,Ht (v1)
+# Skip 0x5f-0x61
 62: vpexpandb/w Vx,Wx (66),(ev)
 63: vpcompressb/w Wx,Vx (66),(ev)
 64: vpblendmd/q Vx,Hx,Wx (66),(ev)
@@ -822,9 +828,9 @@ AVXcode: 3
 05: vpermilpd Vx,Wx,Ib (66),(v)
 06: vperm2f128 Vqq,Hqq,Wqq,Ib (66),(v)
 07:
-08: vroundps Vx,Wx,Ib (66) | vrndscaleps Vx,Wx,Ib (66),(evo)
+08: vroundps Vx,Wx,Ib (66) | vrndscaleps Vx,Wx,Ib (66),(evo) | vrndscaleph Vx,Wx,Ib (evo)
 09: vroundpd Vx,Wx,Ib (66) | vrndscalepd Vx,Wx,Ib (66),(evo)
-0a: vroundss Vss,Wss,Ib (66),(v1) | vrndscaless Vx,Hx,Wx,Ib (66),(evo)
+0a: vroundss Vss,Wss,Ib (66),(v1) | vrndscaless Vx,Hx,Wx,Ib (66),(evo) | vrndscalesh Vx,Hx,Wx,Ib (evo)
 0b: vroundsd Vsd,Wsd,Ib (66),(v1) | vrndscalesd Vx,Hx,Wx,Ib (66),(evo)
 0c: vblendps Vx,Hx,Wx,Ib (66)
 0d: vblendpd Vx,Hx,Wx,Ib (66)
@@ -846,8 +852,8 @@ AVXcode: 3
 22: vpinsrd/q Vdq,Hdq,Ey,Ib (66),(v1)
 23: vshuff32x4/64x2 Vx,Hx,Wx,Ib (66),(ev)
 25: vpternlogd/q Vx,Hx,Wx,Ib (66),(ev)
-26: vgetmantps/d Vx,Wx,Ib (66),(ev)
-27: vgetmantss/d Vx,Hx,Wx,Ib (66),(ev)
+26: vgetmantps/d Vx,Wx,Ib (66),(ev) | vgetmantph Vx,Wx,Ib (ev)
+27: vgetmantss/d Vx,Hx,Wx,Ib (66),(ev) | vgetmantsh Vx,Hx,Wx,Ib (ev)
 30: kshiftrb/w Vk,Uk,Ib (66),(v)
 31: kshiftrd/q Vk,Uk,Ib (66),(v)
 32: kshiftlb/w Vk,Uk,Ib (66),(v)
@@ -871,23 +877,102 @@ AVXcode: 3
 51: vrangess/d Vx,Hx,Wx,Ib (66),(ev)
 54: vfixupimmps/d Vx,Hx,Wx,Ib (66),(ev)
 55: vfixupimmss/d Vx,Hx,Wx,Ib (66),(ev)
-56: vreduceps/d Vx,Wx,Ib (66),(ev)
-57: vreducess/d Vx,Hx,Wx,Ib (66),(ev)
+56: vreduceps/d Vx,Wx,Ib (66),(ev) | vreduceph Vx,Wx,Ib (ev)
+57: vreducess/d Vx,Hx,Wx,Ib (66),(ev) | vreducesh Vx,Hx,Wx,Ib (ev)
 60: vpcmpestrm Vdq,Wdq,Ib (66),(v1)
 61: vpcmpestri Vdq,Wdq,Ib (66),(v1)
 62: vpcmpistrm Vdq,Wdq,Ib (66),(v1)
 63: vpcmpistri Vdq,Wdq,Ib (66),(v1)
-66: vfpclassps/d Vk,Wx,Ib (66),(ev)
-67: vfpclassss/d Vk,Wx,Ib (66),(ev)
+66: vfpclassps/d Vk,Wx,Ib (66),(ev) | vfpclassph Vx,Wx,Ib (ev)
+67: vfpclassss/d Vk,Wx,Ib (66),(ev) | vfpclasssh Vx,Wx,Ib (ev)
 70: vpshldw Vx,Hx,Wx,Ib (66),(ev)
 71: vpshldd/q Vx,Hx,Wx,Ib (66),(ev)
 72: vpshrdw Vx,Hx,Wx,Ib (66),(ev)
 73: vpshrdd/q Vx,Hx,Wx,Ib (66),(ev)
+c2: vcmpph Vx,Hx,Wx,Ib (ev) | vcmpsh Vx,Hx,Wx,Ib (F3),(ev)
 cc: sha1rnds4 Vdq,Wdq,Ib
 ce: vgf2p8affineqb Vx,Wx,Ib (66)
 cf: vgf2p8affineinvqb Vx,Wx,Ib (66)
 df: VAESKEYGEN Vdq,Wdq,Ib (66),(v1)
-f0: RORX Gy,Ey,Ib (F2),(v)
+f0: RORX Gy,Ey,Ib (F2),(v) | HRESET Gv,Ib (F3),(000),(11B)
+EndTable
+
+Table: EVEX map 5
+Referrer:
+AVXcode: 5
+10: vmovsh Vx,Hx,Wx (F3),(ev) | vmovsh Vx,Wx (F3),(ev)
+11: vmovsh Wx,Hx,Vx (F3),(ev) | vmovsh Wx,Vx (F3),(ev)
+1d: vcvtps2phx Vx,Wx (66),(ev) | vcvtss2sh Vx,Hx,Wx (ev)
+2a: vcvtsi2sh Vx,Hx,Wx (F3),(ev)
+2c: vcvttsh2si Vx,Wx (F3),(ev)
+2d: vcvtsh2si Vx,Wx (F3),(ev)
+2e: vucomish Vx,Wx (ev)
+2f: vcomish Vx,Wx (ev)
+51: vsqrtph Vx,Wx (ev) | vsqrtsh Vx,Hx,Wx (F3),(ev)
+58: vaddph Vx,Hx,Wx (ev) | vaddsh Vx,Hx,Wx (F3),(ev)
+59: vmulph Vx,Hx,Wx (ev) | vmulsh Vx,Hx,Wx (F3),(ev)
+5a: vcvtpd2ph Vx,Wx (66),(ev) | vcvtph2pd Vx,Wx (ev) | vcvtsd2sh Vx,Hx,Wx (F2),(ev) | vcvtsh2sd Vx,Hx,Wx (F3),(ev)
+5b: vcvtdq2ph Vx,Wx (ev) | vcvtph2dq Vx,Wx (66),(ev) | vcvtqq2ph Vx,Wx (ev) | vcvttph2dq Vx,Wx (F3),(ev)
+5c: vsubph Vx,Hx,Wx (ev) | vsubsh Vx,Hx,Wx (F3),(ev)
+5d: vminph Vx,Hx,Wx (ev) | vminsh Vx,Hx,Wx (F3),(ev)
+5e: vdivph Vx,Hx,Wx (ev) | vdivsh Vx,Hx,Wx (F3),(ev)
+5f: vmaxph Vx,Hx,Wx (ev) | vmaxsh Vx,Hx,Wx (F3),(ev)
+6e: vmovw Vx,Wx (66),(ev)
+78: vcvttph2udq Vx,Wx (ev) | vcvttph2uqq Vx,Wx (66),(ev) | vcvttsh2usi Vx,Wx (F3),(ev)
+79: vcvtph2udq Vx,Wx (ev) | vcvtph2uqq Vx,Wx (66),(ev) | vcvtsh2usi Vx,Wx (F3),(ev)
+7a: vcvttph2qq Vx,Wx (66),(ev) | vcvtudq2ph Vx,Wx (F2),(ev) | vcvtuqq2ph Vx,Wx (F2),(ev)
+7b: vcvtph2qq Vx,Wx (66),(ev) | vcvtusi2sh Vx,Hx,Wx (F3),(ev)
+7c: vcvttph2uw Vx,Wx (ev) | vcvttph2w Vx,Wx (66),(ev)
+7d: vcvtph2uw Vx,Wx (ev) | vcvtph2w Vx,Wx (66),(ev) | vcvtuw2ph Vx,Wx (F2),(ev) | vcvtw2ph Vx,Wx (F3),(ev)
+7e: vmovw Wx,Vx (66),(ev)
+EndTable
+
+Table: EVEX map 6
+Referrer:
+AVXcode: 6
+13: vcvtph2psx Vx,Wx (66),(ev) | vcvtsh2ss Vx,Hx,Wx (ev)
+2c: vscalefph Vx,Hx,Wx (66),(ev)
+2d: vscalefsh Vx,Hx,Wx (66),(ev)
+42: vgetexpph Vx,Wx (66),(ev)
+43: vgetexpsh Vx,Hx,Wx (66),(ev)
+4c: vrcpph Vx,Wx (66),(ev)
+4d: vrcpsh Vx,Hx,Wx (66),(ev)
+4e: vrsqrtph Vx,Wx (66),(ev)
+4f: vrsqrtsh Vx,Hx,Wx (66),(ev)
+56: vfcmaddcph Vx,Hx,Wx (F2),(ev) | vfmaddcph Vx,Hx,Wx (F3),(ev)
+57: vfcmaddcsh Vx,Hx,Wx (F2),(ev) | vfmaddcsh Vx,Hx,Wx (F3),(ev)
+96: vfmaddsub132ph Vx,Hx,Wx (66),(ev)
+97: vfmsubadd132ph Vx,Hx,Wx (66),(ev)
+98: vfmadd132ph Vx,Hx,Wx (66),(ev)
+99: vfmadd132sh Vx,Hx,Wx (66),(ev)
+9a: vfmsub132ph Vx,Hx,Wx (66),(ev)
+9b: vfmsub132sh Vx,Hx,Wx (66),(ev)
+9c: vfnmadd132ph Vx,Hx,Wx (66),(ev)
+9d: vfnmadd132sh Vx,Hx,Wx (66),(ev)
+9e: vfnmsub132ph Vx,Hx,Wx (66),(ev)
+9f: vfnmsub132sh Vx,Hx,Wx (66),(ev)
+a6: vfmaddsub213ph Vx,Hx,Wx (66),(ev)
+a7: vfmsubadd213ph Vx,Hx,Wx (66),(ev)
+a8: vfmadd213ph Vx,Hx,Wx (66),(ev)
+a9: vfmadd213sh Vx,Hx,Wx (66),(ev)
+aa: vfmsub213ph Vx,Hx,Wx (66),(ev)
+ab: vfmsub213sh Vx,Hx,Wx (66),(ev)
+ac: vfnmadd213ph Vx,Hx,Wx (66),(ev)
+ad: vfnmadd213sh Vx,Hx,Wx (66),(ev)
+ae: vfnmsub213ph Vx,Hx,Wx (66),(ev)
+af: vfnmsub213sh Vx,Hx,Wx (66),(ev)
+b6: vfmaddsub231ph Vx,Hx,Wx (66),(ev)
+b7: vfmsubadd231ph Vx,Hx,Wx (66),(ev)
+b8: vfmadd231ph Vx,Hx,Wx (66),(ev)
+b9: vfmadd231sh Vx,Hx,Wx (66),(ev)
+ba: vfmsub231ph Vx,Hx,Wx (66),(ev)
+bb: vfmsub231sh Vx,Hx,Wx (66),(ev)
+bc: vfnmadd231ph Vx,Hx,Wx (66),(ev)
+bd: vfnmadd231sh Vx,Hx,Wx (66),(ev)
+be: vfnmsub231ph Vx,Hx,Wx (66),(ev)
+bf: vfnmsub231sh Vx,Hx,Wx (66),(ev)
+d6: vfcmulcph Vx,Hx,Wx (F2),(ev) | vfmulcph Vx,Hx,Wx (F3),(ev)
+d7: vfcmulcsh Vx,Hx,Wx (F2),(ev) | vfmulcsh Vx,Hx,Wx (F3),(ev)
 EndTable
 
 GrpTable: Grp1
@@ -970,7 +1055,7 @@ GrpTable: Grp7
 2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B) | ENCLU (111),(11B)
 3: LIDT Ms
 4: SMSW Mw/Rv
-5: rdpkru (110),(11B) | wrpkru (111),(11B) | SAVEPREVSSP (F3),(010),(11B) | RSTORSSP Mq (F3) | SETSSBSY (F3),(000),(11B)
+5: rdpkru (110),(11B) | wrpkru (111),(11B) | SAVEPREVSSP (F3),(010),(11B) | RSTORSSP Mq (F3) | SETSSBSY (F3),(000),(11B) | CLUI (F3),(110),(11B) | SERIALIZE (000),(11B) | STUI (F3),(111),(11B) | TESTUI (F3)(101)(11B) | UIRET (F3),(100),(11B) | XRESLDTRK (F2),(000),(11B) | XSUSLDTRK (F2),(001),(11B)
 6: LMSW Ew
 7: INVLPG Mb | SWAPGS (o64),(000),(11B) | RDTSCP (001),(11B)
 EndTable
@@ -987,7 +1072,7 @@ GrpTable: Grp9
 3: xrstors
 4: xsavec
 5: xsaves
-6: VMPTRLD Mq | VMCLEAR Mq (66) | VMXON Mq (F3) | RDRAND Rv (11B)
+6: VMPTRLD Mq | VMCLEAR Mq (66) | VMXON Mq (F3) | RDRAND Rv (11B) | SENDUIPI Gq (F3)
 7: VMPTRST Mq | VMPTRST Mq (F3) | RDSEED Rv (11B)
 EndTable
 
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index 026031b3b782..17a492c27306 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -615,6 +615,7 @@ static bool memremap_is_efi_data(resource_size_t phys_addr,
 static bool memremap_is_setup_data(resource_size_t phys_addr,
 				   unsigned long size)
 {
+	struct setup_indirect *indirect;
 	struct setup_data *data;
 	u64 paddr, paddr_next;
 
@@ -627,6 +628,10 @@ static bool memremap_is_setup_data(resource_size_t phys_addr,
 
 		data = memremap(paddr, sizeof(*data),
 				MEMREMAP_WB | MEMREMAP_DEC);
+		if (!data) {
+			pr_warn("failed to memremap setup_data entry\n");
+			return false;
+		}
 
 		paddr_next = data->next;
 		len = data->len;
@@ -636,10 +641,21 @@ static bool memremap_is_setup_data(resource_size_t phys_addr,
 			return true;
 		}
 
-		if (data->type == SETUP_INDIRECT &&
-		    ((struct setup_indirect *)data->data)->type != SETUP_INDIRECT) {
-			paddr = ((struct setup_indirect *)data->data)->addr;
-			len = ((struct setup_indirect *)data->data)->len;
+		if (data->type == SETUP_INDIRECT) {
+			memunmap(data);
+			data = memremap(paddr, sizeof(*data) + len,
+					MEMREMAP_WB | MEMREMAP_DEC);
+			if (!data) {
+				pr_warn("failed to memremap indirect setup_data\n");
+				return false;
+			}
+
+			indirect = (struct setup_indirect *)data->data;
+
+			if (indirect->type != SETUP_INDIRECT) {
+				paddr = indirect->addr;
+				len = indirect->len;
+			}
 		}
 
 		memunmap(data);
@@ -660,22 +676,51 @@ static bool memremap_is_setup_data(resource_size_t phys_addr,
 static bool __init early_memremap_is_setup_data(resource_size_t phys_addr,
 						unsigned long size)
 {
+	struct setup_indirect *indirect;
 	struct setup_data *data;
 	u64 paddr, paddr_next;
 
 	paddr = boot_params.hdr.setup_data;
 	while (paddr) {
-		unsigned int len;
+		unsigned int len, size;
 
 		if (phys_addr == paddr)
 			return true;
 
 		data = early_memremap_decrypted(paddr, sizeof(*data));
+		if (!data) {
+			pr_warn("failed to early memremap setup_data entry\n");
+			return false;
+		}
+
+		size = sizeof(*data);
 
 		paddr_next = data->next;
 		len = data->len;
 
-		early_memunmap(data, sizeof(*data));
+		if ((phys_addr > paddr) && (phys_addr < (paddr + len))) {
+			early_memunmap(data, sizeof(*data));
+			return true;
+		}
+
+		if (data->type == SETUP_INDIRECT) {
+			size += len;
+			early_memunmap(data, sizeof(*data));
+			data = early_memremap_decrypted(paddr, size);
+			if (!data) {
+				pr_warn("failed to early memremap indirect setup_data\n");
+				return false;
+			}
+
+			indirect = (struct setup_indirect *)data->data;
+
+			if (indirect->type != SETUP_INDIRECT) {
+				paddr = indirect->addr;
+				len = indirect->len;
+			}
+		}
+
+		early_memunmap(data, size);
 
 		if ((phys_addr > paddr) && (phys_addr < (paddr + len)))
 			return true;
diff --git a/arch/x86/mm/maccess.c b/arch/x86/mm/maccess.c
index 92ec176a7293..5a53c2cc169c 100644
--- a/arch/x86/mm/maccess.c
+++ b/arch/x86/mm/maccess.c
@@ -4,11 +4,6 @@
 #include <linux/kernel.h>
 
 #ifdef CONFIG_X86_64
-static __always_inline u64 canonical_address(u64 vaddr, u8 vaddr_bits)
-{
-	return ((s64)vaddr << (64 - vaddr_bits)) >> (64 - vaddr_bits);
-}
-
 bool copy_from_kernel_nofault_allowed(const void *unsafe_src, size_t size)
 {
 	unsigned long vaddr = (unsigned long)unsafe_src;
@@ -19,7 +14,7 @@ bool copy_from_kernel_nofault_allowed(const void *unsafe_src, size_t size)
 	 * we also need to include the userspace guard page.
 	 */
 	return vaddr >= TASK_SIZE_MAX + PAGE_SIZE &&
-	       canonical_address(vaddr, boot_cpu_data.x86_virt_bits) == vaddr;
+	       __is_canonical_address(vaddr, boot_cpu_data.x86_virt_bits);
 }
 #else
 bool copy_from_kernel_nofault_allowed(const void *unsafe_src, size_t size)
diff --git a/arch/x86/mm/mem_encrypt_amd.c b/arch/x86/mm/mem_encrypt_amd.c
index 2b2d018ea345..6169053c2854 100644
--- a/arch/x86/mm/mem_encrypt_amd.c
+++ b/arch/x86/mm/mem_encrypt_amd.c
@@ -177,25 +177,6 @@ void __init sme_map_bootdata(char *real_mode_data)
 	__sme_early_map_unmap_mem(__va(cmdline_paddr), COMMAND_LINE_SIZE, true);
 }
 
-void __init sme_early_init(void)
-{
-	unsigned int i;
-
-	if (!sme_me_mask)
-		return;
-
-	early_pmd_flags = __sme_set(early_pmd_flags);
-
-	__supported_pte_mask = __sme_set(__supported_pte_mask);
-
-	/* Update the protection map with memory encryption mask */
-	for (i = 0; i < ARRAY_SIZE(protection_map); i++)
-		protection_map[i] = pgprot_encrypted(protection_map[i]);
-
-	if (cc_platform_has(CC_ATTR_GUEST_MEM_ENCRYPT))
-		swiotlb_force = SWIOTLB_FORCE;
-}
-
 void __init sev_setup_arch(void)
 {
 	phys_addr_t total_mem = memblock_phys_mem_size();
@@ -256,7 +237,17 @@ static unsigned long pg_level_to_pfn(int level, pte_t *kpte, pgprot_t *ret_prot)
 	return pfn;
 }
 
-void notify_range_enc_status_changed(unsigned long vaddr, int npages, bool enc)
+static bool amd_enc_tlb_flush_required(bool enc)
+{
+	return true;
+}
+
+static bool amd_enc_cache_flush_required(void)
+{
+	return !cpu_feature_enabled(X86_FEATURE_SME_COHERENT);
+}
+
+static void enc_dec_hypercall(unsigned long vaddr, int npages, bool enc)
 {
 #ifdef CONFIG_PARAVIRT
 	unsigned long sz = npages << PAGE_SHIFT;
@@ -287,6 +278,19 @@ void notify_range_enc_status_changed(unsigned long vaddr, int npages, bool enc)
 #endif
 }
 
+static void amd_enc_status_change_prepare(unsigned long vaddr, int npages, bool enc)
+{
+}
+
+/* Return true unconditionally: return value doesn't matter for the SEV side */
+static bool amd_enc_status_change_finish(unsigned long vaddr, int npages, bool enc)
+{
+	if (!cc_platform_has(CC_ATTR_HOST_MEM_ENCRYPT))
+		enc_dec_hypercall(vaddr, npages, enc);
+
+	return true;
+}
+
 static void __init __set_clr_pte_enc(pte_t *kpte, int level, bool enc)
 {
 	pgprot_t old_prot, new_prot;
@@ -392,7 +396,7 @@ static int __init early_set_memory_enc_dec(unsigned long vaddr,
 
 	ret = 0;
 
-	notify_range_enc_status_changed(start, PAGE_ALIGN(size) >> PAGE_SHIFT, enc);
+	early_set_mem_enc_dec_hypercall(start, PAGE_ALIGN(size) >> PAGE_SHIFT, enc);
 out:
 	__flush_tlb_all();
 	return ret;
@@ -410,7 +414,31 @@ int __init early_set_memory_encrypted(unsigned long vaddr, unsigned long size)
 
 void __init early_set_mem_enc_dec_hypercall(unsigned long vaddr, int npages, bool enc)
 {
-	notify_range_enc_status_changed(vaddr, npages, enc);
+	enc_dec_hypercall(vaddr, npages, enc);
+}
+
+void __init sme_early_init(void)
+{
+	unsigned int i;
+
+	if (!sme_me_mask)
+		return;
+
+	early_pmd_flags = __sme_set(early_pmd_flags);
+
+	__supported_pte_mask = __sme_set(__supported_pte_mask);
+
+	/* Update the protection map with memory encryption mask */
+	for (i = 0; i < ARRAY_SIZE(protection_map); i++)
+		protection_map[i] = pgprot_encrypted(protection_map[i]);
+
+	if (cc_platform_has(CC_ATTR_GUEST_MEM_ENCRYPT))
+		swiotlb_force = SWIOTLB_FORCE;
+
+	x86_platform.guest.enc_status_change_prepare = amd_enc_status_change_prepare;
+	x86_platform.guest.enc_status_change_finish  = amd_enc_status_change_finish;
+	x86_platform.guest.enc_tlb_flush_required    = amd_enc_tlb_flush_required;
+	x86_platform.guest.enc_cache_flush_required  = amd_enc_cache_flush_required;
 }
 
 void __init mem_encrypt_free_decrypted_mem(void)
diff --git a/arch/x86/mm/mem_encrypt_identity.c b/arch/x86/mm/mem_encrypt_identity.c
index 3f0abb403340..b43bc24d2bb6 100644
--- a/arch/x86/mm/mem_encrypt_identity.c
+++ b/arch/x86/mm/mem_encrypt_identity.c
@@ -44,6 +44,7 @@
 #include <asm/setup.h>
 #include <asm/sections.h>
 #include <asm/cmdline.h>
+#include <asm/coco.h>
 
 #include "mm_internal.h"
 
@@ -565,8 +566,7 @@ void __init sme_enable(struct boot_params *bp)
 	} else {
 		/* SEV state cannot be controlled by a command line option */
 		sme_me_mask = me_mask;
-		physical_mask &= ~sme_me_mask;
-		return;
+		goto out;
 	}
 
 	/*
@@ -600,6 +600,10 @@ void __init sme_enable(struct boot_params *bp)
 		sme_me_mask = 0;
 	else
 		sme_me_mask = active_by_default ? me_mask : 0;
-
-	physical_mask &= ~sme_me_mask;
+out:
+	if (sme_me_mask) {
+		physical_mask &= ~sme_me_mask;
+		cc_set_vendor(CC_VENDOR_AMD);
+		cc_set_mask(sme_me_mask);
+	}
 }
diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
index c6b1213086d6..e8b061557887 100644
--- a/arch/x86/mm/numa.c
+++ b/arch/x86/mm/numa.c
@@ -738,17 +738,6 @@ void __init x86_numa_init(void)
 	numa_init(dummy_numa_init);
 }
 
-static void __init init_memory_less_node(int nid)
-{
-	/* Allocate and initialize node data. Memory-less node is now online.*/
-	alloc_node_data(nid);
-	free_area_init_memoryless_node(nid);
-
-	/*
-	 * All zonelists will be built later in start_kernel() after per cpu
-	 * areas are initialized.
-	 */
-}
 
 /*
  * A node may exist which has one or more Generic Initiators but no CPUs and no
@@ -766,9 +755,18 @@ void __init init_gi_nodes(void)
 {
 	int nid;
 
+	/*
+	 * Exclude this node from
+	 * bringup_nonboot_cpus
+	 *  cpu_up
+	 *   __try_online_node
+	 *    register_one_node
+	 * because node_subsys is not initialized yet.
+	 * TODO remove dependency on node_online
+	 */
 	for_each_node_state(nid, N_GENERIC_INITIATOR)
 		if (!node_online(nid))
-			init_memory_less_node(nid);
+			node_set_online(nid);
 }
 
 /*
@@ -798,8 +796,17 @@ void __init init_cpu_to_node(void)
 		if (node == NUMA_NO_NODE)
 			continue;
 
+		/*
+		 * Exclude this node from
+		 * bringup_nonboot_cpus
+		 *  cpu_up
+		 *   __try_online_node
+		 *    register_one_node
+		 * because node_subsys is not initialized yet.
+		 * TODO remove dependency on node_online
+		 */
 		if (!node_online(node))
-			init_memory_less_node(node);
+			node_set_online(node);
 
 		numa_set_node(cpu, node);
 	}
diff --git a/arch/x86/mm/pat/set_memory.c b/arch/x86/mm/pat/set_memory.c
index b4072115c8ef..abf5ed76e4b7 100644
--- a/arch/x86/mm/pat/set_memory.c
+++ b/arch/x86/mm/pat/set_memory.c
@@ -1989,6 +1989,7 @@ int set_memory_global(unsigned long addr, int numpages)
  */
 static int __set_memory_enc_pgtable(unsigned long addr, int numpages, bool enc)
 {
+	pgprot_t empty = __pgprot(0);
 	struct cpa_data cpa;
 	int ret;
 
@@ -1999,18 +2000,20 @@ static int __set_memory_enc_pgtable(unsigned long addr, int numpages, bool enc)
 	memset(&cpa, 0, sizeof(cpa));
 	cpa.vaddr = &addr;
 	cpa.numpages = numpages;
-	cpa.mask_set = enc ? __pgprot(_PAGE_ENC) : __pgprot(0);
-	cpa.mask_clr = enc ? __pgprot(0) : __pgprot(_PAGE_ENC);
+	cpa.mask_set = enc ? pgprot_encrypted(empty) : pgprot_decrypted(empty);
+	cpa.mask_clr = enc ? pgprot_decrypted(empty) : pgprot_encrypted(empty);
 	cpa.pgd = init_mm.pgd;
 
 	/* Must avoid aliasing mappings in the highmem code */
 	kmap_flush_unused();
 	vm_unmap_aliases();
 
-	/*
-	 * Before changing the encryption attribute, we need to flush caches.
-	 */
-	cpa_flush(&cpa, !this_cpu_has(X86_FEATURE_SME_COHERENT));
+	/* Flush the caches as needed before changing the encryption attribute. */
+	if (x86_platform.guest.enc_tlb_flush_required(enc))
+		cpa_flush(&cpa, x86_platform.guest.enc_cache_flush_required());
+
+	/* Notify hypervisor that we are about to set/clr encryption attribute. */
+	x86_platform.guest.enc_status_change_prepare(addr, numpages, enc);
 
 	ret = __change_page_attr_set_clr(&cpa, 1);
 
@@ -2023,11 +2026,11 @@ static int __set_memory_enc_pgtable(unsigned long addr, int numpages, bool enc)
 	 */
 	cpa_flush(&cpa, 0);
 
-	/*
-	 * Notify hypervisor that a given memory range is mapped encrypted
-	 * or decrypted.
-	 */
-	notify_range_enc_status_changed(addr, numpages, enc);
+	/* Notify hypervisor that we have successfully set/clr encryption attribute. */
+	if (!ret) {
+		if (!x86_platform.guest.enc_status_change_finish(addr, numpages, enc))
+			ret = -EIO;
+	}
 
 	return ret;
 }
@@ -2121,12 +2124,6 @@ int set_pages_array_wc(struct page **pages, int numpages)
 }
 EXPORT_SYMBOL(set_pages_array_wc);
 
-int set_pages_array_wt(struct page **pages, int numpages)
-{
-	return _set_pages_array(pages, numpages, _PAGE_CACHE_MODE_WT);
-}
-EXPORT_SYMBOL_GPL(set_pages_array_wt);
-
 int set_pages_wb(struct page *page, int numpages)
 {
 	unsigned long addr = (unsigned long)page_address(page);
diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c
index 2b1e266ff95c..0ecb140864b2 100644
--- a/arch/x86/net/bpf_jit_comp.c
+++ b/arch/x86/net/bpf_jit_comp.c
@@ -394,7 +394,7 @@ static void emit_indirect_jump(u8 **pprog, int reg, u8 *ip)
 	u8 *prog = *pprog;
 
 #ifdef CONFIG_RETPOLINE
-	if (cpu_feature_enabled(X86_FEATURE_RETPOLINE_AMD)) {
+	if (cpu_feature_enabled(X86_FEATURE_RETPOLINE_LFENCE)) {
 		EMIT_LFENCE();
 		EMIT2(0xFF, 0xE0 + reg);
 	} else if (cpu_feature_enabled(X86_FEATURE_RETPOLINE)) {
diff --git a/arch/x86/um/Kconfig b/arch/x86/um/Kconfig
index 40d6a06e41c8..ead7e5b3a975 100644
--- a/arch/x86/um/Kconfig
+++ b/arch/x86/um/Kconfig
@@ -8,6 +8,7 @@ endmenu
 
 config UML_X86
 	def_bool y
+	select ARCH_BINFMT_ELF_EXTRA_PHDRS if X86_32
 
 config 64BIT
 	bool "64-bit kernel" if "$(SUBARCH)" = "x86"
diff --git a/arch/x86/um/user-offsets.c b/arch/x86/um/user-offsets.c
index bae61554abcc..e54a9814ccf1 100644
--- a/arch/x86/um/user-offsets.c
+++ b/arch/x86/um/user-offsets.c
@@ -8,12 +8,11 @@
 #define __FRAME_OFFSETS
 #include <linux/ptrace.h>
 #include <asm/types.h>
+#include <linux/kbuild.h>
 
-#define DEFINE(sym, val) \
-	asm volatile("\n->" #sym " %0 " #val : : "i" (val))
-
-#define DEFINE_LONGS(sym, val) \
-	asm volatile("\n->" #sym " %0 " #val : : "i" (val/sizeof(unsigned long)))
+#define DEFINE_LONGS(sym, val)	\
+	COMMENT(#val " / sizeof(unsigned long)");	\
+	DEFINE(sym, val / sizeof(unsigned long))
 
 void foo(void)
 {
diff --git a/arch/x86/xen/enlighten_hvm.c b/arch/x86/xen/enlighten_hvm.c
index 42300941ec29..517a9d8d8f94 100644
--- a/arch/x86/xen/enlighten_hvm.c
+++ b/arch/x86/xen/enlighten_hvm.c
@@ -9,6 +9,7 @@
 #include <xen/events.h>
 #include <xen/interface/memory.h>
 
+#include <asm/apic.h>
 #include <asm/cpu.h>
 #include <asm/smp.h>
 #include <asm/io_apic.h>
@@ -184,8 +185,7 @@ static int xen_cpu_dead_hvm(unsigned int cpu)
 
 	if (xen_have_vector_callback && xen_feature(XENFEAT_hvm_safe_pvclock))
 		xen_teardown_timer(cpu);
-
-       return 0;
+	return 0;
 }
 
 static bool no_vector_callback __initdata;
@@ -242,15 +242,14 @@ static __init int xen_parse_no_vector_callback(char *arg)
 }
 early_param("xen_no_vector_callback", xen_parse_no_vector_callback);
 
-bool __init xen_hvm_need_lapic(void)
+static __init bool xen_x2apic_available(void)
 {
-	if (xen_pv_domain())
-		return false;
-	if (!xen_hvm_domain())
-		return false;
-	if (xen_feature(XENFEAT_hvm_pirqs) && xen_have_vector_callback)
-		return false;
-	return true;
+	return x2apic_supported();
+}
+
+static bool __init msi_ext_dest_id(void)
+{
+       return cpuid_eax(xen_cpuid_base() + 4) & XEN_HVM_CPUID_EXT_DEST_ID;
 }
 
 static __init void xen_hvm_guest_late_init(void)
@@ -312,9 +311,10 @@ struct hypervisor_x86 x86_hyper_xen_hvm __initdata = {
 	.detect                 = xen_platform_hvm,
 	.type			= X86_HYPER_XEN_HVM,
 	.init.init_platform     = xen_hvm_guest_init,
-	.init.x2apic_available  = xen_x2apic_para_available,
+	.init.x2apic_available  = xen_x2apic_available,
 	.init.init_mem_mapping	= xen_hvm_init_mem_mapping,
 	.init.guest_late_init	= xen_hvm_guest_late_init,
+	.init.msi_ext_dest_id   = msi_ext_dest_id,
 	.runtime.pin_vcpu       = xen_pin_vcpu,
 	.ignore_nopv            = true,
 };
diff --git a/arch/x86/xen/enlighten_pv.c b/arch/x86/xen/enlighten_pv.c
index 5004feb16783..d47c3d176ae4 100644
--- a/arch/x86/xen/enlighten_pv.c
+++ b/arch/x86/xen/enlighten_pv.c
@@ -1341,10 +1341,6 @@ asmlinkage __visible void __init xen_start_kernel(void)
 
 		xen_acpi_sleep_register();
 
-		/* Avoid searching for BIOS MP tables */
-		x86_init.mpparse.find_smp_config = x86_init_noop;
-		x86_init.mpparse.get_smp_config = x86_init_uint_noop;
-
 		xen_boot_params_init_edd();
 
 #ifdef CONFIG_ACPI
diff --git a/arch/x86/xen/smp_pv.c b/arch/x86/xen/smp_pv.c
index 6a8f3b53ab83..4a6019238ee7 100644
--- a/arch/x86/xen/smp_pv.c
+++ b/arch/x86/xen/smp_pv.c
@@ -148,28 +148,12 @@ int xen_smp_intr_init_pv(unsigned int cpu)
 	return rc;
 }
 
-static void __init xen_fill_possible_map(void)
-{
-	int i, rc;
-
-	if (xen_initial_domain())
-		return;
-
-	for (i = 0; i < nr_cpu_ids; i++) {
-		rc = HYPERVISOR_vcpu_op(VCPUOP_is_up, i, NULL);
-		if (rc >= 0) {
-			num_processors++;
-			set_cpu_possible(i, true);
-		}
-	}
-}
-
-static void __init xen_filter_cpu_maps(void)
+static void __init _get_smp_config(unsigned int early)
 {
 	int i, rc;
 	unsigned int subtract = 0;
 
-	if (!xen_initial_domain())
+	if (early)
 		return;
 
 	num_processors = 0;
@@ -210,7 +194,6 @@ static void __init xen_pv_smp_prepare_boot_cpu(void)
 		 * sure the old memory can be recycled. */
 		make_lowmem_page_readwrite(xen_initial_gdt);
 
-	xen_filter_cpu_maps();
 	xen_setup_vcpu_info_placement();
 
 	/*
@@ -476,5 +459,8 @@ static const struct smp_ops xen_smp_ops __initconst = {
 void __init xen_smp_init(void)
 {
 	smp_ops = xen_smp_ops;
-	xen_fill_possible_map();
+
+	/* Avoid searching for BIOS MP tables */
+	x86_init.mpparse.find_smp_config = x86_init_noop;
+	x86_init.mpparse.get_smp_config = _get_smp_config;
 }
diff --git a/arch/x86/xen/vga.c b/arch/x86/xen/vga.c
index 31b1e3477cb6..14ea32e734d5 100644
--- a/arch/x86/xen/vga.c
+++ b/arch/x86/xen/vga.c
@@ -57,6 +57,14 @@ void __init xen_init_vga(const struct dom0_vga_console_info *info, size_t size)
 		screen_info->rsvd_size = info->u.vesa_lfb.rsvd_size;
 		screen_info->rsvd_pos = info->u.vesa_lfb.rsvd_pos;
 
+		if (size >= offsetof(struct dom0_vga_console_info,
+				     u.vesa_lfb.ext_lfb_base)
+		    + sizeof(info->u.vesa_lfb.ext_lfb_base)
+		    && info->u.vesa_lfb.ext_lfb_base) {
+			screen_info->ext_lfb_base = info->u.vesa_lfb.ext_lfb_base;
+			screen_info->capabilities |= VIDEO_CAPABILITY_64BIT_BASE;
+		}
+
 		if (info->video_type == XEN_VGATYPE_EFI_LFB) {
 			screen_info->orig_video_isVGA = VIDEO_TYPE_EFI;
 			break;
@@ -66,14 +74,6 @@ void __init xen_init_vga(const struct dom0_vga_console_info *info, size_t size)
 				     u.vesa_lfb.mode_attrs)
 		    + sizeof(info->u.vesa_lfb.mode_attrs))
 			screen_info->vesa_attributes = info->u.vesa_lfb.mode_attrs;
-
-		if (size >= offsetof(struct dom0_vga_console_info,
-				     u.vesa_lfb.ext_lfb_base)
-		    + sizeof(info->u.vesa_lfb.ext_lfb_base)
-		    && info->u.vesa_lfb.ext_lfb_base) {
-			screen_info->ext_lfb_base = info->u.vesa_lfb.ext_lfb_base;
-			screen_info->capabilities |= VIDEO_CAPABILITY_64BIT_BASE;
-		}
 		break;
 	}
 }
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index 8ac599aa6d99..95bdbaaa5ae6 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -3,6 +3,7 @@ config XTENSA
 	def_bool y
 	select ARCH_32BIT_OFF_T
 	select ARCH_HAS_BINFMT_FLAT if !MMU
+	select ARCH_HAS_CURRENT_STACK_POINTER
 	select ARCH_HAS_DMA_PREP_COHERENT if MMU
 	select ARCH_HAS_SYNC_DMA_FOR_CPU if MMU
 	select ARCH_HAS_SYNC_DMA_FOR_DEVICE if MMU
@@ -40,7 +41,6 @@ config XTENSA
 	select IRQ_DOMAIN
 	select MODULES_USE_ELF_RELA
 	select PERF_USE_VMALLOC
-	select SET_FS
 	select TRACE_IRQFLAGS_SUPPORT
 	select VIRT_TO_BUS
 	help
diff --git a/arch/xtensa/include/asm/asm-uaccess.h b/arch/xtensa/include/asm/asm-uaccess.h
index 7f6cf4151843..7cec869136e3 100644
--- a/arch/xtensa/include/asm/asm-uaccess.h
+++ b/arch/xtensa/include/asm/asm-uaccess.h
@@ -24,76 +24,6 @@
 #include <asm/processor.h>
 
 /*
- * These assembly macros mirror the C macros in asm/uaccess.h.  They
- * should always have identical functionality.  See
- * arch/xtensa/kernel/sys.S for usage.
- */
-
-#define KERNEL_DS	0
-#define USER_DS		1
-
-/*
- * get_fs reads current->thread.current_ds into a register.
- * On Entry:
- * 	<ad>	anything
- * 	<sp>	stack
- * On Exit:
- * 	<ad>	contains current->thread.current_ds
- */
-	.macro	get_fs	ad, sp
-	GET_CURRENT(\ad,\sp)
-#if THREAD_CURRENT_DS > 1020
-	addi	\ad, \ad, TASK_THREAD
-	l32i	\ad, \ad, THREAD_CURRENT_DS - TASK_THREAD
-#else
-	l32i	\ad, \ad, THREAD_CURRENT_DS
-#endif
-	.endm
-
-/*
- * set_fs sets current->thread.current_ds to some value.
- * On Entry:
- *	<at>	anything (temp register)
- *	<av>	value to write
- *	<sp>	stack
- * On Exit:
- *	<at>	destroyed (actually, current)
- *	<av>	preserved, value to write
- */
-	.macro	set_fs	at, av, sp
-	GET_CURRENT(\at,\sp)
-	s32i	\av, \at, THREAD_CURRENT_DS
-	.endm
-
-/*
- * kernel_ok determines whether we should bypass addr/size checking.
- * See the equivalent C-macro version below for clarity.
- * On success, kernel_ok branches to a label indicated by parameter
- * <success>.  This implies that the macro falls through to the next
- * insruction on an error.
- *
- * Note that while this macro can be used independently, we designed
- * in for optimal use in the access_ok macro below (i.e., we fall
- * through on error).
- *
- * On Entry:
- * 	<at>		anything (temp register)
- * 	<success>	label to branch to on success; implies
- * 			fall-through macro on error
- * 	<sp>		stack pointer
- * On Exit:
- * 	<at>		destroyed (actually, current->thread.current_ds)
- */
-
-#if ((KERNEL_DS != 0) || (USER_DS == 0))
-# error Assembly macro kernel_ok fails
-#endif
-	.macro	kernel_ok  at, sp, success
-	get_fs	\at, \sp
-	beqz	\at, \success
-	.endm
-
-/*
  * user_ok determines whether the access to user-space memory is allowed.
  * See the equivalent C-macro version below for clarity.
  *
@@ -147,7 +77,6 @@
  * 	<at>	destroyed
  */
 	.macro	access_ok  aa, as, at, sp, error
-	kernel_ok  \at, \sp, .Laccess_ok_\@
 	user_ok    \aa, \as, \at, \error
 .Laccess_ok_\@:
 	.endm
diff --git a/arch/xtensa/include/asm/current.h b/arch/xtensa/include/asm/current.h
index 5d98a7ad4251..08010dbf5e09 100644
--- a/arch/xtensa/include/asm/current.h
+++ b/arch/xtensa/include/asm/current.h
@@ -26,6 +26,8 @@ static inline struct task_struct *get_current(void)
 
 #define current get_current()
 
+register unsigned long current_stack_pointer __asm__("a1");
+
 #else
 
 #define GET_CURRENT(reg,sp)		\
diff --git a/arch/xtensa/include/asm/pgtable.h b/arch/xtensa/include/asm/pgtable.h
index bd5aeb795567..8da562f5da73 100644
--- a/arch/xtensa/include/asm/pgtable.h
+++ b/arch/xtensa/include/asm/pgtable.h
@@ -241,6 +241,7 @@ static inline void paging_init(void) { }
  * The pmd contains the kernel virtual address of the pte page.
  */
 #define pmd_page_vaddr(pmd) ((unsigned long)(pmd_val(pmd) & PAGE_MASK))
+#define pmd_pfn(pmd) (__pa(pmd_val(pmd)) >> PAGE_SHIFT)
 #define pmd_page(pmd) virt_to_page(pmd_val(pmd))
 
 /*
diff --git a/arch/xtensa/include/asm/processor.h b/arch/xtensa/include/asm/processor.h
index 37d3e9887fe7..abad7c3df46f 100644
--- a/arch/xtensa/include/asm/processor.h
+++ b/arch/xtensa/include/asm/processor.h
@@ -152,18 +152,12 @@
  */
 #define SPILL_SLOT_CALL12(sp, reg) (*(((unsigned long *)(sp)) - 16 + (reg)))
 
-typedef struct {
-	unsigned long seg;
-} mm_segment_t;
-
 struct thread_struct {
 
 	/* kernel's return address and stack pointer for context switching */
 	unsigned long ra; /* kernel's a0: return address and window call size */
 	unsigned long sp; /* kernel's a1: stack pointer */
 
-	mm_segment_t current_ds;    /* see uaccess.h for example uses */
-
 	/* struct xtensa_cpuinfo info; */
 
 	unsigned long bad_vaddr; /* last user fault */
@@ -186,7 +180,6 @@ struct thread_struct {
 {									\
 	ra:		0, 						\
 	sp:		sizeof(init_stack) + (long) &init_stack,	\
-	current_ds:	{0},						\
 	/*info:		{0}, */						\
 	bad_vaddr:	0,						\
 	bad_uaddr:	0,						\
diff --git a/arch/xtensa/include/asm/stacktrace.h b/arch/xtensa/include/asm/stacktrace.h
index fe06e8ed162b..a85e785a6288 100644
--- a/arch/xtensa/include/asm/stacktrace.h
+++ b/arch/xtensa/include/asm/stacktrace.h
@@ -19,14 +19,14 @@ struct stackframe {
 
 static __always_inline unsigned long *stack_pointer(struct task_struct *task)
 {
-	unsigned long *sp;
+	unsigned long sp;
 
 	if (!task || task == current)
-		__asm__ __volatile__ ("mov %0, a1\n" : "=a"(sp));
+		sp = current_stack_pointer;
 	else
-		sp = (unsigned long *)task->thread.sp;
+		sp = task->thread.sp;
 
-	return sp;
+	return (unsigned long *)sp;
 }
 
 void walk_stackframe(unsigned long *sp,
diff --git a/arch/xtensa/include/asm/thread_info.h b/arch/xtensa/include/asm/thread_info.h
index a312333a9add..f6fcbba1d02f 100644
--- a/arch/xtensa/include/asm/thread_info.h
+++ b/arch/xtensa/include/asm/thread_info.h
@@ -52,8 +52,6 @@ struct thread_info {
 	__u32			cpu;		/* current CPU */
 	__s32			preempt_count;	/* 0 => preemptable,< 0 => BUG*/
 
-	mm_segment_t		addr_limit;	/* thread address space */
-
 	unsigned long		cpenable;
 #if XCHAL_HAVE_EXCLUSIVE
 	/* result of the most recent exclusive store */
@@ -81,7 +79,6 @@ struct thread_info {
 	.flags		= 0,			\
 	.cpu		= 0,			\
 	.preempt_count	= INIT_PREEMPT_COUNT,	\
-	.addr_limit	= KERNEL_DS,		\
 }
 
 /* how to get the thread information struct from C */
diff --git a/arch/xtensa/include/asm/uaccess.h b/arch/xtensa/include/asm/uaccess.h
index 75bd8fbf52ba..56aec6d504fe 100644
--- a/arch/xtensa/include/asm/uaccess.h
+++ b/arch/xtensa/include/asm/uaccess.h
@@ -19,31 +19,7 @@
 #include <linux/prefetch.h>
 #include <asm/types.h>
 #include <asm/extable.h>
-
-/*
- * The fs value determines whether argument validity checking should
- * be performed or not.  If get_fs() == USER_DS, checking is
- * performed, with get_fs() == KERNEL_DS, checking is bypassed.
- *
- * For historical reasons (Data Segment Register?), these macros are
- * grossly misnamed.
- */
-
-#define KERNEL_DS	((mm_segment_t) { 0 })
-#define USER_DS		((mm_segment_t) { 1 })
-
-#define get_fs()	(current->thread.current_ds)
-#define set_fs(val)	(current->thread.current_ds = (val))
-
-#define uaccess_kernel() (get_fs().seg == KERNEL_DS.seg)
-
-#define __kernel_ok (uaccess_kernel())
-#define __user_ok(addr, size) \
-		(((size) <= TASK_SIZE)&&((addr) <= TASK_SIZE-(size)))
-#define __access_ok(addr, size) (__kernel_ok || __user_ok((addr), (size)))
-#define access_ok(addr, size) __access_ok((unsigned long)(addr), (size))
-
-#define user_addr_max() (uaccess_kernel() ? ~0UL : TASK_SIZE)
+#include <asm-generic/access_ok.h>
 
 /*
  * These are the main single-value transfer routines.  They
diff --git a/arch/xtensa/include/uapi/asm/shmbuf.h b/arch/xtensa/include/uapi/asm/shmbuf.h
index 554a57a6a90f..bb8bdddae9b5 100644
--- a/arch/xtensa/include/uapi/asm/shmbuf.h
+++ b/arch/xtensa/include/uapi/asm/shmbuf.h
@@ -20,9 +20,12 @@
 #ifndef _XTENSA_SHMBUF_H
 #define _XTENSA_SHMBUF_H
 
+#include <asm/ipcbuf.h>
+#include <asm/posix_types.h>
+
 struct shmid64_ds {
 	struct ipc64_perm	shm_perm;	/* operation perms */
-	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_size_t		shm_segsz;	/* size of segment (bytes) */
 	unsigned long		shm_atime;	/* last attach time */
 	unsigned long		shm_atime_high;
 	unsigned long		shm_dtime;	/* last detach time */
diff --git a/arch/xtensa/include/uapi/asm/signal.h b/arch/xtensa/include/uapi/asm/signal.h
index 79ddabaa4e5d..b8c824dd4b74 100644
--- a/arch/xtensa/include/uapi/asm/signal.h
+++ b/arch/xtensa/include/uapi/asm/signal.h
@@ -103,7 +103,7 @@ struct sigaction {
 typedef struct sigaltstack {
 	void *ss_sp;
 	int ss_flags;
-	size_t ss_size;
+	__kernel_size_t ss_size;
 } stack_t;
 
 #endif	/* __ASSEMBLY__ */
diff --git a/arch/xtensa/kernel/asm-offsets.c b/arch/xtensa/kernel/asm-offsets.c
index dc5c83cad9be..f1fd1390d069 100644
--- a/arch/xtensa/kernel/asm-offsets.c
+++ b/arch/xtensa/kernel/asm-offsets.c
@@ -87,7 +87,6 @@ int main(void)
 	OFFSET(TI_STSTUS, thread_info, status);
 	OFFSET(TI_CPU, thread_info, cpu);
 	OFFSET(TI_PRE_COUNT, thread_info, preempt_count);
-	OFFSET(TI_ADDR_LIMIT, thread_info, addr_limit);
 
 	/* struct thread_info (offset from start_struct) */
 	DEFINE(THREAD_RA, offsetof (struct task_struct, thread.ra));
@@ -108,8 +107,6 @@ int main(void)
 #endif
 	DEFINE(THREAD_XTREGS_USER, offsetof (struct thread_info, xtregs_user));
 	DEFINE(XTREGS_USER_SIZE, sizeof(xtregs_user_t));
-	DEFINE(THREAD_CURRENT_DS, offsetof (struct task_struct, \
-	       thread.current_ds));
 
 	/* struct mm_struct */
 	DEFINE(MM_USERS, offsetof(struct mm_struct, mm_users));
diff --git a/arch/xtensa/kernel/irq.c b/arch/xtensa/kernel/irq.c
index 15051a8a1539..529fe9245821 100644
--- a/arch/xtensa/kernel/irq.c
+++ b/arch/xtensa/kernel/irq.c
@@ -36,9 +36,8 @@ asmlinkage void do_IRQ(int hwirq, struct pt_regs *regs)
 #ifdef CONFIG_DEBUG_STACKOVERFLOW
 	/* Debugging check for stack overflow: is there less than 1KB free? */
 	{
-		unsigned long sp;
+		unsigned long sp = current_stack_pointer;
 
-		__asm__ __volatile__ ("mov %0, a1\n" : "=a" (sp));
 		sp &= THREAD_SIZE - 1;
 
 		if (unlikely(sp < (sizeof(thread_info) + 1024)))
diff --git a/arch/xtensa/platforms/iss/simdisk.c b/arch/xtensa/platforms/iss/simdisk.c
index 8eb6ad1a3a1d..0f0e0724397f 100644
--- a/arch/xtensa/platforms/iss/simdisk.c
+++ b/arch/xtensa/platforms/iss/simdisk.c
@@ -108,13 +108,13 @@ static void simdisk_submit_bio(struct bio *bio)
 	sector_t sector = bio->bi_iter.bi_sector;
 
 	bio_for_each_segment(bvec, bio, iter) {
-		char *buffer = kmap_atomic(bvec.bv_page) + bvec.bv_offset;
+		char *buffer = bvec_kmap_local(&bvec);
 		unsigned len = bvec.bv_len >> SECTOR_SHIFT;
 
 		simdisk_transfer(dev, sector, len, buffer,
 				bio_data_dir(bio) == WRITE);
 		sector += len;
-		kunmap_atomic(buffer);
+		kunmap_local(buffer);
 	}
 
 	bio_endio(bio);