summaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/m68k/Kconfig195
-rw-r--r--arch/m68k/Kconfig.bus55
-rw-r--r--arch/m68k/Kconfig.cpu429
-rw-r--r--arch/m68k/Kconfig.devices171
-rw-r--r--arch/m68k/Kconfig.machine (renamed from arch/m68k/Kconfig.nommu)543
-rw-r--r--arch/m68k/Kconfig.mmu411
6 files changed, 888 insertions, 916 deletions
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index 9e8ee9d2b8ca..6c28582fb98f 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -21,6 +21,15 @@ config ARCH_HAS_ILOG2_U32
config ARCH_HAS_ILOG2_U64
bool
+config GENERIC_CLOCKEVENTS
+ bool
+
+config GENERIC_CMOS_UPDATE
+ def_bool !MMU
+
+config GENERIC_GPIO
+ bool
+
config GENERIC_HWEIGHT
bool
default y
@@ -29,10 +38,16 @@ config GENERIC_CALIBRATE_DELAY
bool
default y
+config GENERIC_IOMAP
+ def_bool MMU
+
config TIME_LOW_RES
bool
default y
+config ARCH_USES_GETTIMEOFFSET
+ def_bool MMU
+
config NO_IOPORT
def_bool y
@@ -62,13 +77,31 @@ config MMU
Select if you want MMU-based virtualised addressing space
support by paged memory management. If unsure, say 'Y'.
-menu "Platform dependent setup"
+config MMU_MOTOROLA
+ bool
+
+config MMU_SUN3
+ bool
+ depends on MMU && !MMU_MOTOROLA
+
+menu "Platform setup"
+
+source arch/m68k/Kconfig.cpu
+
+source arch/m68k/Kconfig.machine
+
+source arch/m68k/Kconfig.bus
+
+endmenu
+
+menu "Kernel Features"
-if MMU
-source arch/m68k/Kconfig.mmu
+if COLDFIRE
+source "kernel/Kconfig.preempt"
endif
-if !MMU
-source arch/m68k/Kconfig.nommu
+
+if !MMU || COLDFIRE
+source "kernel/time/Kconfig"
endif
source "mm/Kconfig"
@@ -85,9 +118,9 @@ if !MMU
menu "Power management options"
config PM
- bool "Power Management support"
- help
- Support processor power management modes
+ bool "Power Management support"
+ help
+ Support processor power management modes
endmenu
endif
@@ -96,151 +129,7 @@ source "net/Kconfig"
source "drivers/Kconfig"
-if MMU
-
-menu "Character devices"
-
-config ATARI_MFPSER
- tristate "Atari MFP serial support"
- depends on ATARI
- ---help---
- If you like to use the MFP serial ports ("Modem1", "Serial1") under
- Linux, say Y. The driver equally supports all kinds of MFP serial
- ports and automatically detects whether Serial1 is available.
-
- To compile this driver as a module, choose M here.
-
- Note for Falcon users: You also have an MFP port, it's just not
- wired to the outside... But you could use the port under Linux.
-
-config ATARI_MIDI
- tristate "Atari MIDI serial support"
- depends on ATARI
- help
- If you want to use your Atari's MIDI port in Linux, say Y.
-
- To compile this driver as a module, choose M here.
-
-config ATARI_DSP56K
- tristate "Atari DSP56k support (EXPERIMENTAL)"
- depends on ATARI && EXPERIMENTAL
- help
- If you want to be able to use the DSP56001 in Falcons, say Y. This
- driver is still experimental, and if you don't know what it is, or
- if you don't have this processor, just say N.
-
- To compile this driver as a module, choose M here.
-
-config AMIGA_BUILTIN_SERIAL
- tristate "Amiga builtin serial support"
- depends on AMIGA
- help
- If you want to use your Amiga's built-in serial port in Linux,
- answer Y.
-
- To compile this driver as a module, choose M here.
-
-config MULTIFACE_III_TTY
- tristate "Multiface Card III serial support"
- depends on AMIGA
- help
- If you want to use a Multiface III card's serial port in Linux,
- answer Y.
-
- To compile this driver as a module, choose M here.
-
-config GVPIOEXT
- tristate "GVP IO-Extender support"
- depends on PARPORT=n && ZORRO
- help
- If you want to use a GVP IO-Extender serial card in Linux, say Y.
- Otherwise, say N.
-
-config GVPIOEXT_LP
- tristate "GVP IO-Extender parallel printer support"
- depends on GVPIOEXT
- help
- Say Y to enable driving a printer from the parallel port on your
- GVP IO-Extender card, N otherwise.
-
-config GVPIOEXT_PLIP
- tristate "GVP IO-Extender PLIP support"
- depends on GVPIOEXT
- help
- Say Y to enable doing IP over the parallel port on your GVP
- IO-Extender card, N otherwise.
-
-config MAC_HID
- bool
- depends on INPUT_ADBHID
- default y
-
-config HPDCA
- tristate "HP DCA serial support"
- depends on DIO && SERIAL_8250
- help
- If you want to use the internal "DCA" serial ports on an HP300
- machine, say Y here.
-
-config HPAPCI
- tristate "HP APCI serial support"
- depends on HP300 && SERIAL_8250 && EXPERIMENTAL
- help
- If you want to use the internal "APCI" serial ports on an HP400
- machine, say Y here.
-
-config MVME147_SCC
- bool "SCC support for MVME147 serial ports"
- depends on MVME147 && BROKEN
- help
- This is the driver for the serial ports on the Motorola MVME147
- boards. Everyone using one of these boards should say Y here.
-
-config MVME162_SCC
- bool "SCC support for MVME162 serial ports"
- depends on MVME16x && BROKEN
- help
- This is the driver for the serial ports on the Motorola MVME162 and
- 172 boards. Everyone using one of these boards should say Y here.
-
-config BVME6000_SCC
- bool "SCC support for BVME6000 serial ports"
- depends on BVME6000 && BROKEN
- help
- This is the driver for the serial ports on the BVME4000 and BVME6000
- boards from BVM Ltd. Everyone using one of these boards should say
- Y here.
-
-config DN_SERIAL
- bool "Support for DN serial port (dummy)"
- depends on APOLLO
-
-config SERIAL_CONSOLE
- bool "Support for serial port console"
- depends on (AMIGA || ATARI || SUN3 || SUN3X || VME || APOLLO) && (ATARI_MFPSER=y || ATARI_MIDI=y || AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y || SERIAL=y || MVME147_SCC || SERIAL167 || MVME162_SCC || BVME6000_SCC || DN_SERIAL)
- ---help---
- If you say Y here, it will be possible to use a serial port as the
- system console (the system console is the device which receives all
- kernel messages and warnings and which allows logins in single user
- mode). This could be useful if some terminal or printer is connected
- to that serial port.
-
- Even if you say Y here, the currently visible virtual console
- (/dev/tty0) will still be used as the system console by default, but
- you can alter that using a kernel command line option such as
- "console=ttyS1". (Try "man bootparam" or see the documentation of
- your boot loader (lilo or loadlin) about how to pass options to the
- kernel at boot time.)
-
- If you don't have a VGA card installed and you say Y here, the
- kernel will automatically use the first serial line, /dev/ttyS0, as
- system console.
-
- If unsure, say N.
-
-endmenu
-
-endif
+source "arch/m68k/Kconfig.devices"
source "fs/Kconfig"
diff --git a/arch/m68k/Kconfig.bus b/arch/m68k/Kconfig.bus
new file mode 100644
index 000000000000..8294f0c1785e
--- /dev/null
+++ b/arch/m68k/Kconfig.bus
@@ -0,0 +1,55 @@
+if MMU
+
+comment "Bus Support"
+
+config NUBUS
+ bool
+ depends on MAC
+ default y
+
+config ZORRO
+ bool "Amiga Zorro (AutoConfig) bus support"
+ depends on AMIGA
+ help
+ This enables support for the Zorro bus in the Amiga. If you have
+ expansion cards in your Amiga that conform to the Amiga
+ AutoConfig(tm) specification, say Y, otherwise N. Note that even
+ expansion cards that do not fit in the Zorro slots but fit in e.g.
+ the CPU slot may fall in this category, so you have to say Y to let
+ Linux use these.
+
+config AMIGA_PCMCIA
+ bool "Amiga 1200/600 PCMCIA support (EXPERIMENTAL)"
+ depends on AMIGA && EXPERIMENTAL
+ help
+ Include support in the kernel for pcmcia on Amiga 1200 and Amiga
+ 600. If you intend to use pcmcia cards say Y; otherwise say N.
+
+config ISA
+ bool
+ depends on Q40 || AMIGA_PCMCIA
+ default y
+ help
+ Find out whether you have ISA slots on your motherboard. ISA is the
+ name of a bus system, i.e. the way the CPU talks to the other stuff
+ inside your box. Other bus systems are PCI, EISA, MicroChannel
+ (MCA) or VESA. ISA is an older system, now being displaced by PCI;
+ newer boards don't support it. If you have ISA, say Y, otherwise N.
+
+config GENERIC_ISA_DMA
+ def_bool ISA
+
+source "drivers/pci/Kconfig"
+
+source "drivers/zorro/Kconfig"
+
+endif
+
+if !MMU
+
+config ISA_DMA_API
+ def_bool !M5272
+
+source "drivers/pcmcia/Kconfig"
+
+endif
diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu
new file mode 100644
index 000000000000..e632b2d12106
--- /dev/null
+++ b/arch/m68k/Kconfig.cpu
@@ -0,0 +1,429 @@
+comment "Processor Type"
+
+config M68000
+ bool
+ select CPU_HAS_NO_BITFIELDS
+ help
+ The Freescale (was Motorola) 68000 CPU is the first generation of
+ the well known M68K family of processors. The CPU core as well as
+ being available as a stand alone CPU was also used in many
+ System-On-Chip devices (eg 68328, 68302, etc). It does not contain
+ a paging MMU.
+
+config MCPU32
+ bool
+ select CPU_HAS_NO_BITFIELDS
+ help
+ The Freescale (was then Motorola) CPU32 is a CPU core that is
+ based on the 68020 processor. For the most part it is used in
+ System-On-Chip parts, and does not contain a paging MMU.
+
+config COLDFIRE
+ bool
+ select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
+ select CPU_HAS_NO_BITFIELDS
+ help
+ The Freescale ColdFire family of processors is a modern derivitive
+ of the 68000 processor family. They are mainly targeted at embedded
+ applications, and are all System-On-Chip (SOC) devices, as opposed
+ to stand alone CPUs. They implement a subset of the original 68000
+ processor instruction set.
+
+config M68020
+ bool "68020 support"
+ depends on MMU
+ help
+ If you anticipate running this kernel on a computer with a MC68020
+ processor, say Y. Otherwise, say N. Note that the 68020 requires a
+ 68851 MMU (Memory Management Unit) to run Linux/m68k, except on the
+ Sun 3, which provides its own version.
+
+config M68030
+ bool "68030 support"
+ depends on MMU && !MMU_SUN3
+ help
+ If you anticipate running this kernel on a computer with a MC68030
+ processor, say Y. Otherwise, say N. Note that a MC68EC030 will not
+ work, as it does not include an MMU (Memory Management Unit).
+
+config M68040
+ bool "68040 support"
+ depends on MMU && !MMU_SUN3
+ help
+ If you anticipate running this kernel on a computer with a MC68LC040
+ or MC68040 processor, say Y. Otherwise, say N. Note that an
+ MC68EC040 will not work, as it does not include an MMU (Memory
+ Management Unit).
+
+config M68060
+ bool "68060 support"
+ depends on MMU && !MMU_SUN3
+ help
+ If you anticipate running this kernel on a computer with a MC68060
+ processor, say Y. Otherwise, say N.
+
+config M68328
+ bool "MC68328"
+ depends on !MMU
+ select M68000
+ help
+ Motorola 68328 processor support.
+
+config M68EZ328
+ bool "MC68EZ328"
+ depends on !MMU
+ select M68000
+ help
+ Motorola 68EX328 processor support.
+
+config M68VZ328
+ bool "MC68VZ328"
+ depends on !MMU
+ select M68000
+ help
+ Motorola 68VZ328 processor support.
+
+config M68360
+ bool "MC68360"
+ depends on !MMU
+ select MCPU32
+ help
+ Motorola 68360 processor support.
+
+config M5206
+ bool "MCF5206"
+ depends on !MMU
+ select COLDFIRE
+ select COLDFIRE_SW_A7
+ select HAVE_MBAR
+ help
+ Motorola ColdFire 5206 processor support.
+
+config M5206e
+ bool "MCF5206e"
+ depends on !MMU
+ select COLDFIRE
+ select COLDFIRE_SW_A7
+ select HAVE_MBAR
+ help
+ Motorola ColdFire 5206e processor support.
+
+config M520x
+ bool "MCF520x"
+ depends on !MMU
+ select COLDFIRE
+ select GENERIC_CLOCKEVENTS
+ select HAVE_CACHE_SPLIT
+ help
+ Freescale Coldfire 5207/5208 processor support.
+
+config M523x
+ bool "MCF523x"
+ depends on !MMU
+ select COLDFIRE
+ select GENERIC_CLOCKEVENTS
+ select HAVE_CACHE_SPLIT
+ select HAVE_IPSBAR
+ help
+ Freescale Coldfire 5230/1/2/4/5 processor support
+
+config M5249
+ bool "MCF5249"
+ depends on !MMU
+ select COLDFIRE
+ select COLDFIRE_SW_A7
+ select HAVE_MBAR
+ help
+ Motorola ColdFire 5249 processor support.
+
+config M527x
+ bool
+
+config M5271
+ bool "MCF5271"
+ depends on !MMU
+ select COLDFIRE
+ select M527x
+ select HAVE_CACHE_SPLIT
+ select HAVE_IPSBAR
+ select GENERIC_CLOCKEVENTS
+ help
+ Freescale (Motorola) ColdFire 5270/5271 processor support.
+
+config M5272
+ bool "MCF5272"
+ depends on !MMU
+ select COLDFIRE
+ select COLDFIRE_SW_A7
+ select HAVE_MBAR
+ help
+ Motorola ColdFire 5272 processor support.
+
+config M5275
+ bool "MCF5275"
+ depends on !MMU
+ select COLDFIRE
+ select M527x
+ select HAVE_CACHE_SPLIT
+ select HAVE_IPSBAR
+ select GENERIC_CLOCKEVENTS
+ help
+ Freescale (Motorola) ColdFire 5274/5275 processor support.
+
+config M528x
+ bool "MCF528x"
+ depends on !MMU
+ select COLDFIRE
+ select GENERIC_CLOCKEVENTS
+ select HAVE_CACHE_SPLIT
+ select HAVE_IPSBAR
+ help
+ Motorola ColdFire 5280/5282 processor support.
+
+config M5307
+ bool "MCF5307"
+ depends on !MMU
+ select COLDFIRE
+ select COLDFIRE_SW_A7
+ select HAVE_CACHE_CB
+ select HAVE_MBAR
+ help
+ Motorola ColdFire 5307 processor support.
+
+config M532x
+ bool "MCF532x"
+ depends on !MMU
+ select COLDFIRE
+ select HAVE_CACHE_CB
+ help
+ Freescale (Motorola) ColdFire 532x processor support.
+
+config M5407
+ bool "MCF5407"
+ depends on !MMU
+ select COLDFIRE
+ select COLDFIRE_SW_A7
+ select HAVE_CACHE_CB
+ select HAVE_MBAR
+ help
+ Motorola ColdFire 5407 processor support.
+
+config M54xx
+ bool
+
+config M547x
+ bool "MCF547x"
+ depends on !MMU
+ select COLDFIRE
+ select M54xx
+ select HAVE_CACHE_CB
+ select HAVE_MBAR
+ help
+ Freescale ColdFire 5470/5471/5472/5473/5474/5475 processor support.
+
+config M548x
+ bool "MCF548x"
+ depends on !MMU
+ select COLDFIRE
+ select M54xx
+ select HAVE_CACHE_CB
+ select HAVE_MBAR
+ help
+ Freescale ColdFire 5480/5481/5482/5483/5484/5485 processor support.
+
+
+comment "Processor Specific Options"
+
+config M68KFPU_EMU
+ bool "Math emulation support (EXPERIMENTAL)"
+ depends on MMU
+ depends on EXPERIMENTAL
+ help
+ At some point in the future, this will cause floating-point math
+ instructions to be emulated by the kernel on machines that lack a
+ floating-point math coprocessor. Thrill-seekers and chronically
+ sleep-deprived psychotic hacker types can say Y now, everyone else
+ should probably wait a while.
+
+config M68KFPU_EMU_EXTRAPREC
+ bool "Math emulation extra precision"
+ depends on M68KFPU_EMU
+ help
+ The fpu uses normally a few bit more during calculations for
+ correct rounding, the emulator can (often) do the same but this
+ extra calculation can cost quite some time, so you can disable
+ it here. The emulator will then "only" calculate with a 64 bit
+ mantissa and round slightly incorrect, what is more than enough
+ for normal usage.
+
+config M68KFPU_EMU_ONLY
+ bool "Math emulation only kernel"
+ depends on M68KFPU_EMU
+ help
+ This option prevents any floating-point instructions from being
+ compiled into the kernel, thereby the kernel doesn't save any
+ floating point context anymore during task switches, so this
+ kernel will only be usable on machines without a floating-point
+ math coprocessor. This makes the kernel a bit faster as no tests
+ needs to be executed whether a floating-point instruction in the
+ kernel should be executed or not.
+
+config ADVANCED
+ bool "Advanced configuration options"
+ depends on MMU
+ ---help---
+ This gives you access to some advanced options for the CPU. The
+ defaults should be fine for most users, but these options may make
+ it possible for you to improve performance somewhat if you know what
+ you are doing.
+
+ Note that the answer to this question won't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about these options.
+
+ Most users should say N to this question.
+
+config RMW_INSNS
+ bool "Use read-modify-write instructions"
+ depends on ADVANCED
+ ---help---
+ This allows to use certain instructions that work with indivisible
+ read-modify-write bus cycles. While this is faster than the
+ workaround of disabling interrupts, it can conflict with DMA
+ ( = direct memory access) on many Amiga systems, and it is also said
+ to destabilize other machines. It is very likely that this will
+ cause serious problems on any Amiga or Atari Medusa if set. The only
+ configuration where it should work are 68030-based Ataris, where it
+ apparently improves performance. But you've been warned! Unless you
+ really know what you are doing, say N. Try Y only if you're quite
+ adventurous.
+
+config SINGLE_MEMORY_CHUNK
+ bool "Use one physical chunk of memory only" if ADVANCED && !SUN3
+ depends on MMU
+ default y if SUN3
+ select NEED_MULTIPLE_NODES
+ help
+ Ignore all but the first contiguous chunk of physical memory for VM
+ purposes. This will save a few bytes kernel size and may speed up
+ some operations. Say N if not sure.
+
+config ARCH_DISCONTIGMEM_ENABLE
+ def_bool MMU && !SINGLE_MEMORY_CHUNK
+
+config 060_WRITETHROUGH
+ bool "Use write-through caching for 68060 supervisor accesses"
+ depends on ADVANCED && M68060
+ ---help---
+ The 68060 generally uses copyback caching of recently accessed data.
+ Copyback caching means that memory writes will be held in an on-chip
+ cache and only written back to memory some time later. Saying Y
+ here will force supervisor (kernel) accesses to use writethrough
+ caching. Writethrough caching means that data is written to memory
+ straight away, so that cache and memory data always agree.
+ Writethrough caching is less efficient, but is needed for some
+ drivers on 68060 based systems where the 68060 bus snooping signal
+ is hardwired on. The 53c710 SCSI driver is known to suffer from
+ this problem.
+
+config M68K_L2_CACHE
+ bool
+ depends on MAC
+ default y
+
+config NODES_SHIFT
+ int
+ default "3"
+ depends on !SINGLE_MEMORY_CHUNK
+
+config FPU
+ bool
+
+config COLDFIRE_SW_A7
+ bool
+
+config HAVE_CACHE_SPLIT
+ bool
+
+config HAVE_CACHE_CB
+ bool
+
+config HAVE_MBAR
+ bool
+
+config HAVE_IPSBAR
+ bool
+
+config CLOCK_SET
+ bool "Enable setting the CPU clock frequency"
+ depends on COLDFIRE
+ default n
+ help
+ On some CPU's you do not need to know what the core CPU clock
+ frequency is. On these you can disable clock setting. On some
+ traditional 68K parts, and on all ColdFire parts you need to set
+ the appropriate CPU clock frequency. On these devices many of the
+ onboard peripherals derive their timing from the master CPU clock
+ frequency.
+
+config CLOCK_FREQ
+ int "Set the core clock frequency"
+ default "66666666"
+ depends on CLOCK_SET
+ help
+ Define the CPU clock frequency in use. This is the core clock
+ frequency, it may or may not be the same as the external clock
+ crystal fitted to your board. Some processors have an internal
+ PLL and can have their frequency programmed at run time, others
+ use internal dividers. In general the kernel won't setup a PLL
+ if it is fitted (there are some exceptions). This value will be
+ specific to the exact CPU that you are using.
+
+config OLDMASK
+ bool "Old mask 5307 (1H55J) silicon"
+ depends on M5307
+ help
+ Build support for the older revision ColdFire 5307 silicon.
+ Specifically this is the 1H55J mask revision.
+
+if HAVE_CACHE_SPLIT
+choice
+ prompt "Split Cache Configuration"
+ default CACHE_I
+
+config CACHE_I
+ bool "Instruction"
+ help
+ Use all of the ColdFire CPU cache memory as an instruction cache.
+
+config CACHE_D
+ bool "Data"
+ help
+ Use all of the ColdFire CPU cache memory as a data cache.
+
+config CACHE_BOTH
+ bool "Both"
+ help
+ Split the ColdFire CPU cache, and use half as an instruction cache
+ and half as a data cache.
+endchoice
+endif
+
+if HAVE_CACHE_CB
+choice
+ prompt "Data cache mode"
+ default CACHE_WRITETHRU
+
+config CACHE_WRITETHRU
+ bool "Write-through"
+ help
+ The ColdFire CPU cache is set into Write-through mode.
+
+config CACHE_COPYBACK
+ bool "Copy-back"
+ help
+ The ColdFire CPU cache is set into Copy-back mode.
+endchoice
+endif
+
diff --git a/arch/m68k/Kconfig.devices b/arch/m68k/Kconfig.devices
new file mode 100644
index 000000000000..d964dc4c2ce8
--- /dev/null
+++ b/arch/m68k/Kconfig.devices
@@ -0,0 +1,171 @@
+if MMU
+
+config ARCH_MAY_HAVE_PC_FDC
+ bool
+ depends on BROKEN && (Q40 || SUN3X)
+ default y
+
+menu "Platform devices"
+
+config HEARTBEAT
+ bool "Use power LED as a heartbeat" if AMIGA || APOLLO || ATARI || MAC ||Q40
+ default y if !AMIGA && !APOLLO && !ATARI && !MAC && !Q40 && HP300
+ help
+ Use the power-on LED on your machine as a load meter. The exact
+ behavior is platform-dependent, but normally the flash frequency is
+ a hyperbolic function of the 5-minute load average.
+
+# We have a dedicated heartbeat LED. :-)
+config PROC_HARDWARE
+ bool "/proc/hardware support"
+ help
+ Say Y here to support the /proc/hardware file, which gives you
+ access to information about the machine you're running on,
+ including the model, CPU, MMU, clock speed, BogoMIPS rating,
+ and memory size.
+
+endmenu
+
+menu "Character devices"
+
+config ATARI_MFPSER
+ tristate "Atari MFP serial support"
+ depends on ATARI
+ ---help---
+ If you like to use the MFP serial ports ("Modem1", "Serial1") under
+ Linux, say Y. The driver equally supports all kinds of MFP serial
+ ports and automatically detects whether Serial1 is available.
+
+ To compile this driver as a module, choose M here.
+
+ Note for Falcon users: You also have an MFP port, it's just not
+ wired to the outside... But you could use the port under Linux.
+
+config ATARI_MIDI
+ tristate "Atari MIDI serial support"
+ depends on ATARI
+ help
+ If you want to use your Atari's MIDI port in Linux, say Y.
+
+ To compile this driver as a module, choose M here.
+
+config ATARI_DSP56K
+ tristate "Atari DSP56k support (EXPERIMENTAL)"
+ depends on ATARI && EXPERIMENTAL
+ help
+ If you want to be able to use the DSP56001 in Falcons, say Y. This
+ driver is still experimental, and if you don't know what it is, or
+ if you don't have this processor, just say N.
+
+ To compile this driver as a module, choose M here.
+
+config AMIGA_BUILTIN_SERIAL
+ tristate "Amiga builtin serial support"
+ depends on AMIGA
+ help
+ If you want to use your Amiga's built-in serial port in Linux,
+ answer Y.
+
+ To compile this driver as a module, choose M here.
+
+config MULTIFACE_III_TTY
+ tristate "Multiface Card III serial support"
+ depends on AMIGA
+ help
+ If you want to use a Multiface III card's serial port in Linux,
+ answer Y.
+
+ To compile this driver as a module, choose M here.
+
+config GVPIOEXT
+ tristate "GVP IO-Extender support"
+ depends on PARPORT=n && ZORRO
+ help
+ If you want to use a GVP IO-Extender serial card in Linux, say Y.
+ Otherwise, say N.
+
+config GVPIOEXT_LP
+ tristate "GVP IO-Extender parallel printer support"
+ depends on GVPIOEXT
+ help
+ Say Y to enable driving a printer from the parallel port on your
+ GVP IO-Extender card, N otherwise.
+
+config GVPIOEXT_PLIP
+ tristate "GVP IO-Extender PLIP support"
+ depends on GVPIOEXT
+ help
+ Say Y to enable doing IP over the parallel port on your GVP
+ IO-Extender card, N otherwise.
+
+config MAC_HID
+ bool
+ depends on INPUT_ADBHID
+ default y
+
+config HPDCA
+ tristate "HP DCA serial support"
+ depends on DIO && SERIAL_8250
+ help
+ If you want to use the internal "DCA" serial ports on an HP300
+ machine, say Y here.
+
+config HPAPCI
+ tristate "HP APCI serial support"
+ depends on HP300 && SERIAL_8250 && EXPERIMENTAL
+ help
+ If you want to use the internal "APCI" serial ports on an HP400
+ machine, say Y here.
+
+config MVME147_SCC
+ bool "SCC support for MVME147 serial ports"
+ depends on MVME147 && BROKEN
+ help
+ This is the driver for the serial ports on the Motorola MVME147
+ boards. Everyone using one of these boards should say Y here.
+
+config MVME162_SCC
+ bool "SCC support for MVME162 serial ports"
+ depends on MVME16x && BROKEN
+ help
+ This is the driver for the serial ports on the Motorola MVME162 and
+ 172 boards. Everyone using one of these boards should say Y here.
+
+config BVME6000_SCC
+ bool "SCC support for BVME6000 serial ports"
+ depends on BVME6000 && BROKEN
+ help
+ This is the driver for the serial ports on the BVME4000 and BVME6000
+ boards from BVM Ltd. Everyone using one of these boards should say
+ Y here.
+
+config DN_SERIAL
+ bool "Support for DN serial port (dummy)"
+ depends on APOLLO
+
+config SERIAL_CONSOLE
+ bool "Support for serial port console"
+ depends on (AMIGA || ATARI || SUN3 || SUN3X || VME || APOLLO) && (ATARI_MFPSER=y || ATARI_MIDI=y || AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y || SERIAL=y || MVME147_SCC || SERIAL167 || MVME162_SCC || BVME6000_SCC || DN_SERIAL)
+ ---help---
+ If you say Y here, it will be possible to use a serial port as the
+ system console (the system console is the device which receives all
+ kernel messages and warnings and which allows logins in single user
+ mode). This could be useful if some terminal or printer is connected
+ to that serial port.
+
+ Even if you say Y here, the currently visible virtual console
+ (/dev/tty0) will still be used as the system console by default, but
+ you can alter that using a kernel command line option such as
+ "console=ttyS1". (Try "man bootparam" or see the documentation of
+ your boot loader (lilo or loadlin) about how to pass options to the
+ kernel at boot time.)
+
+ If you don't have a VGA card installed and you say Y here, the
+ kernel will automatically use the first serial line, /dev/ttyS0, as
+ system console.
+
+ If unsure, say N.
+
+endmenu
+
+endif
diff --git a/arch/m68k/Kconfig.nommu b/arch/m68k/Kconfig.machine
index ff46383112a4..7d5c20b896c7 100644
--- a/arch/m68k/Kconfig.nommu
+++ b/arch/m68k/Kconfig.machine
@@ -1,297 +1,142 @@
-config FPU
- bool
- default n
-
-config GENERIC_GPIO
- bool
- default n
-
-config GENERIC_CMOS_UPDATE
- bool
- default y
-
-config GENERIC_CLOCKEVENTS
- bool
- default n
-
-config M68000
- bool
- select CPU_HAS_NO_BITFIELDS
- help
- The Freescale (was Motorola) 68000 CPU is the first generation of
- the well known M68K family of processors. The CPU core as well as
- being available as a stand alone CPU was also used in many
- System-On-Chip devices (eg 68328, 68302, etc). It does not contain
- a paging MMU.
-
-config MCPU32
- bool
- select CPU_HAS_NO_BITFIELDS
- help
- The Freescale (was then Motorola) CPU32 is a CPU core that is
- based on the 68020 processor. For the most part it is used in
- System-On-Chip parts, and does not contain a paging MMU.
-
-config COLDFIRE
- bool
- select GENERIC_GPIO
- select ARCH_REQUIRE_GPIOLIB
- select CPU_HAS_NO_BITFIELDS
- help
- The Freescale ColdFire family of processors is a modern derivitive
- of the 68000 processor family. They are mainly targeted at embedded
- applications, and are all System-On-Chip (SOC) devices, as opposed
- to stand alone CPUs. They implement a subset of the original 68000
- processor instruction set.
-
-config COLDFIRE_SW_A7
- bool
- default n
-
-config HAVE_CACHE_SPLIT
- bool
-
-config HAVE_CACHE_CB
- bool
-
-config HAVE_MBAR
- bool
-
-config HAVE_IPSBAR
- bool
-
-choice
- prompt "CPU"
- default M68EZ328
-
-config M68328
- bool "MC68328"
- select M68000
- help
- Motorola 68328 processor support.
-
-config M68EZ328
- bool "MC68EZ328"
- select M68000
- help
- Motorola 68EX328 processor support.
-
-config M68VZ328
- bool "MC68VZ328"
- select M68000
- help
- Motorola 68VZ328 processor support.
-
-config M68360
- bool "MC68360"
- select MCPU32
- help
- Motorola 68360 processor support.
-
-config M5206
- bool "MCF5206"
- select COLDFIRE
- select COLDFIRE_SW_A7
- select HAVE_MBAR
- help
- Motorola ColdFire 5206 processor support.
+comment "Machine Types"
+
+config AMIGA
+ bool "Amiga support"
+ depends on MMU
+ select MMU_MOTOROLA if MMU
+ help
+ This option enables support for the Amiga series of computers. If
+ you plan to use this kernel on an Amiga, say Y here and browse the
+ material available in <file:Documentation/m68k>; otherwise say N.
+
+config ATARI
+ bool "Atari support"
+ depends on MMU
+ select MMU_MOTOROLA if MMU
+ help
+ This option enables support for the 68000-based Atari series of
+ computers (including the TT, Falcon and Medusa). If you plan to use
+ this kernel on an Atari, say Y here and browse the material
+ available in <file:Documentation/m68k>; otherwise say N.
+
+config MAC
+ bool "Macintosh support"
+ depends on MMU
+ select MMU_MOTOROLA if MMU
+ help
+ This option enables support for the Apple Macintosh series of
+ computers (yes, there is experimental support now, at least for part
+ of the series).
+
+ Say N unless you're willing to code the remaining necessary support.
+ ;)
+
+config APOLLO
+ bool "Apollo support"
+ depends on MMU
+ select MMU_MOTOROLA if MMU
+ help
+ Say Y here if you want to run Linux on an MC680x0-based Apollo
+ Domain workstation such as the DN3500.
+
+config VME
+ bool "VME (Motorola and BVM) support"
+ depends on MMU
+ select MMU_MOTOROLA if MMU
+ help
+ Say Y here if you want to build a kernel for a 680x0 based VME
+ board. Boards currently supported include Motorola boards MVME147,
+ MVME162, MVME166, MVME167, MVME172, and MVME177. BVME4000 and
+ BVME6000 boards from BVM Ltd are also supported.
+
+config MVME147
+ bool "MVME147 support"
+ depends on MMU
+ depends on VME
+ help
+ Say Y to include support for early Motorola VME boards. This will
+ build a kernel which can run on MVME147 single-board computers. If
+ you select this option you will have to select the appropriate
+ drivers for SCSI, Ethernet and serial ports later on.
+
+config MVME16x
+ bool "MVME162, 166 and 167 support"
+ depends on MMU
+ depends on VME
+ help
+ Say Y to include support for Motorola VME boards. This will build a
+ kernel which can run on MVME162, MVME166, MVME167, MVME172, and
+ MVME177 boards. If you select this option you will have to select
+ the appropriate drivers for SCSI, Ethernet and serial ports later
+ on.
+
+config BVME6000
+ bool "BVME4000 and BVME6000 support"
+ depends on MMU
+ depends on VME
+ help
+ Say Y to include support for VME boards from BVM Ltd. This will
+ build a kernel which can run on BVME4000 and BVME6000 boards. If
+ you select this option you will have to select the appropriate
+ drivers for SCSI, Ethernet and serial ports later on.
+
+config HP300
+ bool "HP9000/300 and HP9000/400 support"
+ depends on MMU
+ select MMU_MOTOROLA if MMU
+ help
+ This option enables support for the HP9000/300 and HP9000/400 series
+ of workstations. Support for these machines is still somewhat
+ experimental. If you plan to try to use the kernel on such a machine
+ say Y here.
+ Everybody else says N.
+
+config SUN3X
+ bool "Sun3x support"
+ depends on MMU
+ select MMU_MOTOROLA if MMU
+ select M68030
+ help
+ This option enables support for the Sun 3x series of workstations.
+ Be warned that this support is very experimental.
+ Note that Sun 3x kernels are not compatible with Sun 3 hardware.
+ General Linux information on the Sun 3x series (now discontinued)
+ is at <http://www.angelfire.com/ca2/tech68k/sun3.html>.
+
+ If you don't want to compile a kernel for a Sun 3x, say N.
+
+config Q40
+ bool "Q40/Q60 support"
+ depends on MMU
+ select MMU_MOTOROLA if MMU
+ help
+ The Q40 is a Motorola 68040-based successor to the Sinclair QL
+ manufactured in Germany. There is an official Q40 home page at
+ <http://www.q40.de/>. This option enables support for the Q40 and
+ Q60. Select your CPU below. For 68LC060 don't forget to enable FPU
+ emulation.
+
+config SUN3
+ bool "Sun3 support"
+ depends on MMU
+ depends on !MMU_MOTOROLA
+ select MMU_SUN3 if MMU
+ select M68020
+ help
+ This option enables support for the Sun 3 series of workstations
+ (3/50, 3/60, 3/1xx, 3/2xx systems). Enabling this option requires
+ that all other hardware types must be disabled, as Sun 3 kernels
+ are incompatible with all other m68k targets (including Sun 3x!).
+
+ If you don't want to compile a kernel exclusively for a Sun 3, say N.
-config M5206e
- bool "MCF5206e"
- select COLDFIRE
- select COLDFIRE_SW_A7
- select HAVE_MBAR
- help
- Motorola ColdFire 5206e processor support.
-
-config M520x
- bool "MCF520x"
- select COLDFIRE
- select GENERIC_CLOCKEVENTS
- select HAVE_CACHE_SPLIT
- help
- Freescale Coldfire 5207/5208 processor support.
-
-config M523x
- bool "MCF523x"
- select COLDFIRE
- select GENERIC_CLOCKEVENTS
- select HAVE_CACHE_SPLIT
- select HAVE_IPSBAR
- help
- Freescale Coldfire 5230/1/2/4/5 processor support
-
-config M5249
- bool "MCF5249"
- select COLDFIRE
- select COLDFIRE_SW_A7
- select HAVE_MBAR
- help
- Motorola ColdFire 5249 processor support.
-
-config M5271
- bool "MCF5271"
- select COLDFIRE
- select HAVE_CACHE_SPLIT
- select HAVE_IPSBAR
- help
- Freescale (Motorola) ColdFire 5270/5271 processor support.
-
-config M5272
- bool "MCF5272"
- select COLDFIRE
- select COLDFIRE_SW_A7
- select HAVE_MBAR
- help
- Motorola ColdFire 5272 processor support.
-
-config M5275
- bool "MCF5275"
- select COLDFIRE
- select HAVE_CACHE_SPLIT
- select HAVE_IPSBAR
- help
- Freescale (Motorola) ColdFire 5274/5275 processor support.
-
-config M528x
- bool "MCF528x"
- select COLDFIRE
- select GENERIC_CLOCKEVENTS
- select HAVE_CACHE_SPLIT
- select HAVE_IPSBAR
- help
- Motorola ColdFire 5280/5282 processor support.
-
-config M5307
- bool "MCF5307"
- select COLDFIRE
- select COLDFIRE_SW_A7
- select HAVE_CACHE_CB
- select HAVE_MBAR
- help
- Motorola ColdFire 5307 processor support.
-
-config M532x
- bool "MCF532x"
- select COLDFIRE
- select HAVE_CACHE_CB
- help
- Freescale (Motorola) ColdFire 532x processor support.
-
-config M5407
- bool "MCF5407"
- select COLDFIRE
- select COLDFIRE_SW_A7
- select HAVE_CACHE_CB
- select HAVE_MBAR
- help
- Motorola ColdFire 5407 processor support.
-
-config M547x
- bool "MCF547x"
- select COLDFIRE
- select HAVE_CACHE_CB
- select HAVE_MBAR
- help
- Freescale ColdFire 5470/5471/5472/5473/5474/5475 processor support.
-
-config M548x
- bool "MCF548x"
- select COLDFIRE
- select HAVE_CACHE_CB
- select HAVE_MBAR
- help
- Freescale ColdFire 5480/5481/5482/5483/5484/5485 processor support.
-
-endchoice
-
-config M527x
- bool
- depends on (M5271 || M5275)
- select GENERIC_CLOCKEVENTS
- default y
-
-config M54xx
+config PILOT
bool
- depends on (M548x || M547x)
- default y
-
-config CLOCK_SET
- bool "Enable setting the CPU clock frequency"
- default n
- help
- On some CPU's you do not need to know what the core CPU clock
- frequency is. On these you can disable clock setting. On some
- traditional 68K parts, and on all ColdFire parts you need to set
- the appropriate CPU clock frequency. On these devices many of the
- onboard peripherals derive their timing from the master CPU clock
- frequency.
-
-config CLOCK_FREQ
- int "Set the core clock frequency"
- default "66666666"
- depends on CLOCK_SET
- help
- Define the CPU clock frequency in use. This is the core clock
- frequency, it may or may not be the same as the external clock
- crystal fitted to your board. Some processors have an internal
- PLL and can have their frequency programmed at run time, others
- use internal dividers. In general the kernel won't setup a PLL
- if it is fitted (there are some exceptions). This value will be
- specific to the exact CPU that you are using.
-
-config OLDMASK
- bool "Old mask 5307 (1H55J) silicon"
- depends on M5307
- help
- Build support for the older revision ColdFire 5307 silicon.
- Specifically this is the 1H55J mask revision.
-
-if HAVE_CACHE_SPLIT
-choice
- prompt "Split Cache Configuration"
- default CACHE_I
-
-config CACHE_I
- bool "Instruction"
- help
- Use all of the ColdFire CPU cache memory as an instruction cache.
-
-config CACHE_D
- bool "Data"
- help
- Use all of the ColdFire CPU cache memory as a data cache.
-
-config CACHE_BOTH
- bool "Both"
- help
- Split the ColdFire CPU cache, and use half as an instruction cache
- and half as a data cache.
-endchoice
-endif
-
-if HAVE_CACHE_CB
-choice
- prompt "Data cache mode"
- default CACHE_WRITETHRU
-
-config CACHE_WRITETHRU
- bool "Write-through"
- help
- The ColdFire CPU cache is set into Write-through mode.
-
-config CACHE_COPYBACK
- bool "Copy-back"
- help
- The ColdFire CPU cache is set into Copy-back mode.
-endchoice
-endif
-
-comment "Platform"
config PILOT3
bool "Pilot 1000/5000, PalmPilot Personal/Pro, or PalmIII support"
depends on M68328
+ select PILOT
help
Support for the Palm Pilot 1000/5000, Personal/Pro and PalmIII.
@@ -302,7 +147,7 @@ config XCOPILOT_BUGS
Support the bugs of Xcopilot.
config UC5272
- bool 'Arcturus Networks uC5272 dimm board support'
+ bool "Arcturus Networks uC5272 dimm board support"
depends on M5272
help
Support for the Arcturus Networks uC5272 dimm board.
@@ -356,15 +201,23 @@ config UCQUICC
help
Support for the Lineo uCquicc board.
+config ARNEWSH
+ bool
+
config ARN5206
bool "Arnewsh 5206 board support"
depends on M5206
+ select ARNEWSH
help
Support for the Arnewsh 5206 board.
+config FREESCALE
+ bool
+
config M5206eC3
bool "Motorola M5206eC3 board support"
depends on M5206e
+ select FREESCALE
help
Support for the Motorola M5206eC3 board.
@@ -377,75 +230,95 @@ config ELITE
config M5208EVB
bool "Freescale M5208EVB board support"
depends on M520x
+ select FREESCALE
help
Support for the Freescale Coldfire M5208EVB.
config M5235EVB
bool "Freescale M5235EVB support"
depends on M523x
+ select FREESCALE
help
Support for the Freescale M5235EVB board.
config M5249C3
bool "Motorola M5249C3 board support"
depends on M5249
+ select FREESCALE
help
Support for the Motorola M5249C3 board.
config M5271EVB
bool "Freescale (Motorola) M5271EVB board support"
depends on M5271
+ select FREESCALE
help
Support for the Freescale (Motorola) M5271EVB board.
config M5275EVB
bool "Freescale (Motorola) M5275EVB board support"
depends on M5275
+ select FREESCALE
help
Support for the Freescale (Motorola) M5275EVB board.
config M5272C3
bool "Motorola M5272C3 board support"
depends on M5272
+ select FREESCALE
help
Support for the Motorola M5272C3 board.
+config senTec
+ bool
+
config COBRA5272
bool "senTec COBRA5272 board support"
depends on M5272
+ select senTec
help
Support for the senTec COBRA5272 board.
+config AVNET
+ bool
+
config AVNET5282
bool "Avnet 5282 board support"
depends on M528x
+ select AVNET
help
- Support for the Avnet 5282 board.
-
+ Support for the Avnet 5282 board.
+
config M5282EVB
bool "Motorola M5282EVB board support"
depends on M528x
+ select FREESCALE
help
Support for the Motorola M5282EVB board.
config COBRA5282
bool "senTec COBRA5282 board support"
depends on M528x
+ select senTec
help
Support for the senTec COBRA5282 board.
-
+
+config EMAC_INC
+ bool
+
config SOM5282EM
bool "EMAC.Inc SOM5282EM board support"
depends on M528x
+ select EMAC_INC
help
- Support for the EMAC.Inc SOM5282EM module.
-
+ Support for the EMAC.Inc SOM5282EM module.
+
config WILDFIRE
bool "Intec Automation Inc. WildFire board support"
depends on M528x
help
Support for the Intec Automation Inc. WildFire.
-
+
config WILDFIREMOD
bool "Intec Automation Inc. WildFire module support"
depends on M528x
@@ -455,12 +328,14 @@ config WILDFIREMOD
config ARN5307
bool "Arnewsh 5307 board support"
depends on M5307
+ select ARNEWSH
help
Support for the Arnewsh 5307 board.
config M5307C3
bool "Motorola M5307C3 board support"
depends on M5307
+ select FREESCALE
help
Support for the Motorola M5307C3 board.
@@ -473,6 +348,7 @@ config SECUREEDGEMP3
config M5329EVB
bool "Freescale (Motorola) M5329EVB board support"
depends on M532x
+ select FREESCALE
help
Support for the Freescale (Motorola) M5329EVB board.
@@ -485,6 +361,7 @@ config COBRA5329
config M5407C3
bool "Motorola M5407C3 board support"
depends on M5407
+ select FREESCALE
help
Support for the Motorola M5407C3 board.
@@ -494,21 +371,27 @@ config FIREBEE
help
Support for the FireBee ColdFire 5475 based board.
+config HW_FEITH
+ bool
+
config CLEOPATRA
bool "Feith CLEOPATRA board support"
depends on (M5307 || M5407)
+ select HW_FEITH
help
Support for the Feith Cleopatra boards.
config CANCam
bool "Feith CANCam board support"
depends on M5272
+ select HW_FEITH
help
Support for the Feith CANCam board.
config SCALES
bool "Feith SCALES board support"
depends on M5272
+ select HW_FEITH
help
Support for the Feith SCALES board.
@@ -524,9 +407,13 @@ config SNAPGEAR
help
Special additional support for SnapGear router boards.
+config SNEHA
+ bool
+
config CPU16B
bool "Sneha Technologies S.L. Sarasvati board support"
depends on M5272
+ select SNEHA
help
Support for the SNEHA CPU16B board.
@@ -536,12 +423,21 @@ config MOD5272
help
Support for the Netburner MOD-5272 board.
+config SAVANT
+ bool
+
config SAVANTrosie1
bool "Savant Rosie1 board support"
depends on M523x
+ select SAVANT
help
Support for the Savant Rosie1 board.
+
+if !MMU || COLDFIRE
+
+comment "Machine Options"
+
config ROMFS_FROM_ROM
bool "ROMFS image not RAM resident"
depends on (NETtel || SNAPGEAR)
@@ -549,51 +445,6 @@ config ROMFS_FROM_ROM
The ROMfs filesystem will stay resident in the FLASH/ROM, not be
moved into RAM.
-config PILOT
- bool
- default y
- depends on (PILOT3 || PILOT5)
-
-config ARNEWSH
- bool
- default y
- depends on (ARN5206 || ARN5307)
-
-config FREESCALE
- bool
- default y
- depends on (M5206eC3 || M5208EVB || M5235EVB || M5249C3 || M5271EVB || M5272C3 || M5275EVB || M5282EVB || M5307C3 || M5329EVB || M5407C3)
-
-config HW_FEITH
- bool
- default y
- depends on (CLEOPATRA || CANCam || SCALES)
-
-config senTec
- bool
- default y
- depends on (COBRA5272 || COBRA5282)
-
-config EMAC_INC
- bool
- default y
- depends on (SOM5282EM)
-
-config SNEHA
- bool
- default y
- depends on CPU16B
-
-config SAVANT
- bool
- default y
- depends on SAVANTrosie1
-
-config AVNET
- bool
- default y
- depends on (AVNET5282)
-
config UBOOT
bool "Support for U-Boot command line parameters"
help
@@ -772,16 +623,4 @@ config ROMKERNEL
endchoice
-if COLDFIRE
-source "kernel/Kconfig.preempt"
endif
-
-source "kernel/time/Kconfig"
-
-config ISA_DMA_API
- bool
- depends on !M5272
- default y
-
-source "drivers/pcmcia/Kconfig"
-
diff --git a/arch/m68k/Kconfig.mmu b/arch/m68k/Kconfig.mmu
deleted file mode 100644
index 13e20bbc4079..000000000000
--- a/arch/m68k/Kconfig.mmu
+++ /dev/null
@@ -1,411 +0,0 @@
-config GENERIC_IOMAP
- bool
- default y
-
-config ARCH_MAY_HAVE_PC_FDC
- bool
- depends on BROKEN && (Q40 || SUN3X)
- default y
-
-config ARCH_USES_GETTIMEOFFSET
- def_bool y
-
-config EISA
- bool
- ---help---
- The Extended Industry Standard Architecture (EISA) bus was
- developed as an open alternative to the IBM MicroChannel bus.
-
- The EISA bus provided some of the features of the IBM MicroChannel
- bus while maintaining backward compatibility with cards made for
- the older ISA bus. The EISA bus saw limited use between 1988 and
- 1995 when it was made obsolete by the PCI bus.
-
- Say Y here if you are building a kernel for an EISA-based machine.
-
- Otherwise, say N.
-
-config MCA
- bool
- help
- MicroChannel Architecture is found in some IBM PS/2 machines and
- laptops. It is a bus system similar to PCI or ISA. See
- <file:Documentation/mca.txt> (and especially the web page given
- there) before attempting to build an MCA bus kernel.
-
-config PCMCIA
- tristate
- ---help---
- Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
- computer. These are credit-card size devices such as network cards,
- modems or hard drives often used with laptops computers. There are
- actually two varieties of these cards: the older 16 bit PCMCIA cards
- and the newer 32 bit CardBus cards. If you want to use CardBus
- cards, you need to say Y here and also to "CardBus support" below.
-
- To use your PC-cards, you will need supporting software from David
- Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
- for location). Please also read the PCMCIA-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as modules, choose M here: the
- modules will be called pcmcia_core and ds.
-
-config AMIGA
- bool "Amiga support"
- select MMU_MOTOROLA if MMU
- help
- This option enables support for the Amiga series of computers. If
- you plan to use this kernel on an Amiga, say Y here and browse the
- material available in <file:Documentation/m68k>; otherwise say N.
-
-config ATARI
- bool "Atari support"
- select MMU_MOTOROLA if MMU
- help
- This option enables support for the 68000-based Atari series of
- computers (including the TT, Falcon and Medusa). If you plan to use
- this kernel on an Atari, say Y here and browse the material
- available in <file:Documentation/m68k>; otherwise say N.
-
-config MAC
- bool "Macintosh support"
- select MMU_MOTOROLA if MMU
- help
- This option enables support for the Apple Macintosh series of
- computers (yes, there is experimental support now, at least for part
- of the series).
-
- Say N unless you're willing to code the remaining necessary support.
- ;)
-
-config NUBUS
- bool
- depends on MAC
- default y
-
-config M68K_L2_CACHE
- bool
- depends on MAC
- default y
-
-config APOLLO
- bool "Apollo support"
- select MMU_MOTOROLA if MMU
- help
- Say Y here if you want to run Linux on an MC680x0-based Apollo
- Domain workstation such as the DN3500.
-
-config VME
- bool "VME (Motorola and BVM) support"
- select MMU_MOTOROLA if MMU
- help
- Say Y here if you want to build a kernel for a 680x0 based VME
- board. Boards currently supported include Motorola boards MVME147,
- MVME162, MVME166, MVME167, MVME172, and MVME177. BVME4000 and
- BVME6000 boards from BVM Ltd are also supported.
-
-config MVME147
- bool "MVME147 support"
- depends on VME
- help
- Say Y to include support for early Motorola VME boards. This will
- build a kernel which can run on MVME147 single-board computers. If
- you select this option you will have to select the appropriate
- drivers for SCSI, Ethernet and serial ports later on.
-
-config MVME16x
- bool "MVME162, 166 and 167 support"
- depends on VME
- help
- Say Y to include support for Motorola VME boards. This will build a
- kernel which can run on MVME162, MVME166, MVME167, MVME172, and
- MVME177 boards. If you select this option you will have to select
- the appropriate drivers for SCSI, Ethernet and serial ports later
- on.
-
-config BVME6000
- bool "BVME4000 and BVME6000 support"
- depends on VME
- help
- Say Y to include support for VME boards from BVM Ltd. This will
- build a kernel which can run on BVME4000 and BVME6000 boards. If
- you select this option you will have to select the appropriate
- drivers for SCSI, Ethernet and serial ports later on.
-
-config HP300
- bool "HP9000/300 and HP9000/400 support"
- select MMU_MOTOROLA if MMU
- help
- This option enables support for the HP9000/300 and HP9000/400 series
- of workstations. Support for these machines is still somewhat
- experimental. If you plan to try to use the kernel on such a machine
- say Y here.
- Everybody else says N.
-
-config DIO
- bool "DIO bus support"
- depends on HP300
- default y
- help
- Say Y here to enable support for the "DIO" expansion bus used in
- HP300 machines. If you are using such a system you almost certainly
- want this.
-
-config SUN3X
- bool "Sun3x support"
- select MMU_MOTOROLA if MMU
- select M68030
- help
- This option enables support for the Sun 3x series of workstations.
- Be warned that this support is very experimental.
- Note that Sun 3x kernels are not compatible with Sun 3 hardware.
- General Linux information on the Sun 3x series (now discontinued)
- is at <http://www.angelfire.com/ca2/tech68k/sun3.html>.
-
- If you don't want to compile a kernel for a Sun 3x, say N.
-
-config Q40
- bool "Q40/Q60 support"
- select MMU_MOTOROLA if MMU
- help
- The Q40 is a Motorola 68040-based successor to the Sinclair QL
- manufactured in Germany. There is an official Q40 home page at
- <http://www.q40.de/>. This option enables support for the Q40 and
- Q60. Select your CPU below. For 68LC060 don't forget to enable FPU
- emulation.
-
-config SUN3
- bool "Sun3 support"
- depends on !MMU_MOTOROLA
- select MMU_SUN3 if MMU
- select M68020
- help
- This option enables support for the Sun 3 series of workstations
- (3/50, 3/60, 3/1xx, 3/2xx systems). Enabling this option requires
- that all other hardware types must be disabled, as Sun 3 kernels
- are incompatible with all other m68k targets (including Sun 3x!).
-
- If you don't want to compile a kernel exclusively for a Sun 3, say N.
-
-config NATFEAT
- bool "ARAnyM emulator support"
- depends on ATARI
- help
- This option enables support for ARAnyM native features, such as
- access to a disk image as /dev/hda.
-
-config NFBLOCK
- tristate "NatFeat block device support"
- depends on BLOCK && NATFEAT
- help
- Say Y to include support for the ARAnyM NatFeat block device
- which allows direct access to the hard drives without using
- the hardware emulation.
-
-config NFCON
- tristate "NatFeat console driver"
- depends on NATFEAT
- help
- Say Y to include support for the ARAnyM NatFeat console driver
- which allows the console output to be redirected to the stderr
- output of ARAnyM.
-
-config NFETH
- tristate "NatFeat Ethernet support"
- depends on NET_ETHERNET && NATFEAT
- help
- Say Y to include support for the ARAnyM NatFeat network device
- which will emulate a regular ethernet device while presenting an
- ethertap device to the host system.
-
-comment "Processor type"
-
-config M68020
- bool "68020 support"
- help
- If you anticipate running this kernel on a computer with a MC68020
- processor, say Y. Otherwise, say N. Note that the 68020 requires a
- 68851 MMU (Memory Management Unit) to run Linux/m68k, except on the
- Sun 3, which provides its own version.
-
-config M68030
- bool "68030 support"
- depends on !MMU_SUN3
- help
- If you anticipate running this kernel on a computer with a MC68030
- processor, say Y. Otherwise, say N. Note that a MC68EC030 will not
- work, as it does not include an MMU (Memory Management Unit).
-
-config M68040
- bool "68040 support"
- depends on !MMU_SUN3
- help
- If you anticipate running this kernel on a computer with a MC68LC040
- or MC68040 processor, say Y. Otherwise, say N. Note that an
- MC68EC040 will not work, as it does not include an MMU (Memory
- Management Unit).
-
-config M68060
- bool "68060 support"
- depends on !MMU_SUN3
- help
- If you anticipate running this kernel on a computer with a MC68060
- processor, say Y. Otherwise, say N.
-
-config MMU_MOTOROLA
- bool
-
-config MMU_SUN3
- bool
- depends on MMU && !MMU_MOTOROLA
-
-config M68KFPU_EMU
- bool "Math emulation support (EXPERIMENTAL)"
- depends on EXPERIMENTAL
- help
- At some point in the future, this will cause floating-point math
- instructions to be emulated by the kernel on machines that lack a
- floating-point math coprocessor. Thrill-seekers and chronically
- sleep-deprived psychotic hacker types can say Y now, everyone else
- should probably wait a while.
-
-config M68KFPU_EMU_EXTRAPREC
- bool "Math emulation extra precision"
- depends on M68KFPU_EMU
- help
- The fpu uses normally a few bit more during calculations for
- correct rounding, the emulator can (often) do the same but this
- extra calculation can cost quite some time, so you can disable
- it here. The emulator will then "only" calculate with a 64 bit
- mantissa and round slightly incorrect, what is more than enough
- for normal usage.
-
-config M68KFPU_EMU_ONLY
- bool "Math emulation only kernel"
- depends on M68KFPU_EMU
- help
- This option prevents any floating-point instructions from being
- compiled into the kernel, thereby the kernel doesn't save any
- floating point context anymore during task switches, so this
- kernel will only be usable on machines without a floating-point
- math coprocessor. This makes the kernel a bit faster as no tests
- needs to be executed whether a floating-point instruction in the
- kernel should be executed or not.
-
-config ADVANCED
- bool "Advanced configuration options"
- ---help---
- This gives you access to some advanced options for the CPU. The
- defaults should be fine for most users, but these options may make
- it possible for you to improve performance somewhat if you know what
- you are doing.
-
- Note that the answer to this question won't directly affect the
- kernel: saying N will just cause the configurator to skip all
- the questions about these options.
-
- Most users should say N to this question.
-
-config RMW_INSNS
- bool "Use read-modify-write instructions"
- depends on ADVANCED
- ---help---
- This allows to use certain instructions that work with indivisible
- read-modify-write bus cycles. While this is faster than the
- workaround of disabling interrupts, it can conflict with DMA
- ( = direct memory access) on many Amiga systems, and it is also said
- to destabilize other machines. It is very likely that this will
- cause serious problems on any Amiga or Atari Medusa if set. The only
- configuration where it should work are 68030-based Ataris, where it
- apparently improves performance. But you've been warned! Unless you
- really know what you are doing, say N. Try Y only if you're quite
- adventurous.
-
-config SINGLE_MEMORY_CHUNK
- bool "Use one physical chunk of memory only" if ADVANCED && !SUN3
- default y if SUN3
- select NEED_MULTIPLE_NODES
- help
- Ignore all but the first contiguous chunk of physical memory for VM
- purposes. This will save a few bytes kernel size and may speed up
- some operations. Say N if not sure.
-
-config 060_WRITETHROUGH
- bool "Use write-through caching for 68060 supervisor accesses"
- depends on ADVANCED && M68060
- ---help---
- The 68060 generally uses copyback caching of recently accessed data.
- Copyback caching means that memory writes will be held in an on-chip
- cache and only written back to memory some time later. Saying Y
- here will force supervisor (kernel) accesses to use writethrough
- caching. Writethrough caching means that data is written to memory
- straight away, so that cache and memory data always agree.
- Writethrough caching is less efficient, but is needed for some
- drivers on 68060 based systems where the 68060 bus snooping signal
- is hardwired on. The 53c710 SCSI driver is known to suffer from
- this problem.
-
-config ARCH_DISCONTIGMEM_ENABLE
- def_bool !SINGLE_MEMORY_CHUNK
-
-config NODES_SHIFT
- int
- default "3"
- depends on !SINGLE_MEMORY_CHUNK
-
-config ZORRO
- bool "Amiga Zorro (AutoConfig) bus support"
- depends on AMIGA
- help
- This enables support for the Zorro bus in the Amiga. If you have
- expansion cards in your Amiga that conform to the Amiga
- AutoConfig(tm) specification, say Y, otherwise N. Note that even
- expansion cards that do not fit in the Zorro slots but fit in e.g.
- the CPU slot may fall in this category, so you have to say Y to let
- Linux use these.
-
-config AMIGA_PCMCIA
- bool "Amiga 1200/600 PCMCIA support (EXPERIMENTAL)"
- depends on AMIGA && EXPERIMENTAL
- help
- Include support in the kernel for pcmcia on Amiga 1200 and Amiga
- 600. If you intend to use pcmcia cards say Y; otherwise say N.
-
-config HEARTBEAT
- bool "Use power LED as a heartbeat" if AMIGA || APOLLO || ATARI || MAC ||Q40
- default y if !AMIGA && !APOLLO && !ATARI && !MAC && !Q40 && HP300
- help
- Use the power-on LED on your machine as a load meter. The exact
- behavior is platform-dependent, but normally the flash frequency is
- a hyperbolic function of the 5-minute load average.
-
-# We have a dedicated heartbeat LED. :-)
-config PROC_HARDWARE
- bool "/proc/hardware support"
- help
- Say Y here to support the /proc/hardware file, which gives you
- access to information about the machine you're running on,
- including the model, CPU, MMU, clock speed, BogoMIPS rating,
- and memory size.
-
-config ISA
- bool
- depends on Q40 || AMIGA_PCMCIA
- default y
- help
- Find out whether you have ISA slots on your motherboard. ISA is the
- name of a bus system, i.e. the way the CPU talks to the other stuff
- inside your box. Other bus systems are PCI, EISA, MicroChannel
- (MCA) or VESA. ISA is an older system, now being displaced by PCI;
- newer boards don't support it. If you have ISA, say Y, otherwise N.
-
-config GENERIC_ISA_DMA
- bool
- depends on Q40 || AMIGA_PCMCIA
- default y
-
-source "drivers/pci/Kconfig"
-
-source "drivers/zorro/Kconfig"
-