diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/arm/mach-integrator/common.h | 7 | ||||
| -rw-r--r-- | arch/arm/mach-integrator/core.c | 50 | ||||
| -rw-r--r-- | arch/arm/mach-integrator/include/mach/platform.h | 1 | ||||
| -rw-r--r-- | arch/arm/mach-integrator/integrator_ap.c | 46 | ||||
| -rw-r--r-- | arch/arm/mach-integrator/integrator_cp.c | 4 | ||||
| -rw-r--r-- | arch/arm/mach-integrator/pci_v3.c | 23 |
6 files changed, 69 insertions, 62 deletions
diff --git a/arch/arm/mach-integrator/common.h b/arch/arm/mach-integrator/common.h index fc9f47d289f4..79197d8b34aa 100644 --- a/arch/arm/mach-integrator/common.h +++ b/arch/arm/mach-integrator/common.h @@ -1,5 +1,10 @@ #include <linux/amba/serial.h> -extern struct amba_pl010_data integrator_uart_data; +#ifdef CONFIG_ARCH_INTEGRATOR_AP +extern struct amba_pl010_data ap_uart_data; +#else +/* Not used without Integrator/AP support anyway */ +struct amba_pl010_data ap_uart_data {}; +#endif void integrator_init_early(void); int integrator_init(bool is_cp); void integrator_reserve(void); diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index 161fbf8596bd..39c060f75e47 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -18,7 +18,6 @@ #include <linux/memblock.h> #include <linux/sched.h> #include <linux/smp.h> -#include <linux/termios.h> #include <linux/amba/bus.h> #include <linux/amba/serial.h> #include <linux/io.h> @@ -47,10 +46,10 @@ static AMBA_APB_DEVICE(rtc, "rtc", 0, INTEGRATOR_RTC_BASE, INTEGRATOR_RTC_IRQ, NULL); static AMBA_APB_DEVICE(uart0, "uart0", 0, - INTEGRATOR_UART0_BASE, INTEGRATOR_UART0_IRQ, &integrator_uart_data); + INTEGRATOR_UART0_BASE, INTEGRATOR_UART0_IRQ, NULL); static AMBA_APB_DEVICE(uart1, "uart1", 0, - INTEGRATOR_UART1_BASE, INTEGRATOR_UART1_IRQ, &integrator_uart_data); + INTEGRATOR_UART1_BASE, INTEGRATOR_UART1_IRQ, NULL); static AMBA_APB_DEVICE(kmi0, "kmi0", 0, KMI0_BASE, KMI0_IRQ, NULL); static AMBA_APB_DEVICE(kmi1, "kmi1", 0, KMI1_BASE, KMI1_IRQ, NULL); @@ -78,6 +77,8 @@ int __init integrator_init(bool is_cp) uart1_device.periphid = 0x00041010; kmi0_device.periphid = 0x00041050; kmi1_device.periphid = 0x00041050; + uart0_device.dev.platform_data = &ap_uart_data; + uart1_device.dev.platform_data = &ap_uart_data; } for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { @@ -90,49 +91,6 @@ int __init integrator_init(bool is_cp) #endif -/* - * On the Integrator platform, the port RTS and DTR are provided by - * bits in the following SC_CTRLS register bits: - * RTS DTR - * UART0 7 6 - * UART1 5 4 - */ -#define SC_CTRLC __io_address(INTEGRATOR_SC_CTRLC) -#define SC_CTRLS __io_address(INTEGRATOR_SC_CTRLS) - -static void integrator_uart_set_mctrl(struct amba_device *dev, void __iomem *base, unsigned int mctrl) -{ - unsigned int ctrls = 0, ctrlc = 0, rts_mask, dtr_mask; - u32 phybase = dev->res.start; - - if (phybase == INTEGRATOR_UART0_BASE) { - /* UART0 */ - rts_mask = 1 << 4; - dtr_mask = 1 << 5; - } else { - /* UART1 */ - rts_mask = 1 << 6; - dtr_mask = 1 << 7; - } - - if (mctrl & TIOCM_RTS) - ctrlc |= rts_mask; - else - ctrls |= rts_mask; - - if (mctrl & TIOCM_DTR) - ctrlc |= dtr_mask; - else - ctrls |= dtr_mask; - - __raw_writel(ctrls, SC_CTRLS); - __raw_writel(ctrlc, SC_CTRLC); -} - -struct amba_pl010_data integrator_uart_data = { - .set_mctrl = integrator_uart_set_mctrl, -}; - static DEFINE_RAW_SPINLOCK(cm_lock); /** diff --git a/arch/arm/mach-integrator/include/mach/platform.h b/arch/arm/mach-integrator/include/mach/platform.h index efeac5d0bc9e..be5859efe10e 100644 --- a/arch/arm/mach-integrator/include/mach/platform.h +++ b/arch/arm/mach-integrator/include/mach/platform.h @@ -190,7 +190,6 @@ #define INTEGRATOR_SC_CTRLC_OFFSET 0x0C #define INTEGRATOR_SC_DEC_OFFSET 0x10 #define INTEGRATOR_SC_ARB_OFFSET 0x14 -#define INTEGRATOR_SC_PCIENABLE_OFFSET 0x18 #define INTEGRATOR_SC_LOCK_OFFSET 0x1C #define INTEGRATOR_SC_BASE 0x11000000 diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index 771cbe44b662..a0a7cbbb7a70 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -39,6 +39,7 @@ #include <linux/of_platform.h> #include <linux/stat.h> #include <linux/sys_soc.h> +#include <linux/termios.h> #include <video/vga.h> #include <mach/hardware.h> @@ -63,7 +64,7 @@ #include "common.h" /* Base address to the AP system controller */ -static void __iomem *ap_syscon_base; +void __iomem *ap_syscon_base; /* * All IO addresses are mapped onto VA 0xFFFx.xxxx, where x.xxxx @@ -251,6 +252,45 @@ static struct physmap_flash_data ap_flash_data = { }; /* + * For the PL010 found in the Integrator/AP some of the UART control is + * implemented in the system controller and accessed using a callback + * from the driver. + */ +static void integrator_uart_set_mctrl(struct amba_device *dev, + void __iomem *base, unsigned int mctrl) +{ + unsigned int ctrls = 0, ctrlc = 0, rts_mask, dtr_mask; + u32 phybase = dev->res.start; + + if (phybase == INTEGRATOR_UART0_BASE) { + /* UART0 */ + rts_mask = 1 << 4; + dtr_mask = 1 << 5; + } else { + /* UART1 */ + rts_mask = 1 << 6; + dtr_mask = 1 << 7; + } + + if (mctrl & TIOCM_RTS) + ctrlc |= rts_mask; + else + ctrls |= rts_mask; + + if (mctrl & TIOCM_DTR) + ctrlc |= dtr_mask; + else + ctrls |= dtr_mask; + + __raw_writel(ctrls, ap_syscon_base + INTEGRATOR_SC_CTRLS_OFFSET); + __raw_writel(ctrlc, ap_syscon_base + INTEGRATOR_SC_CTRLC_OFFSET); +} + +struct amba_pl010_data ap_uart_data = { + .set_mctrl = integrator_uart_set_mctrl, +}; + +/* * Where is the timer (VA)? */ #define TIMER0_VA_BASE __io_address(INTEGRATOR_TIMER0_BASE) @@ -447,9 +487,9 @@ static struct of_dev_auxdata ap_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_RTC_BASE, "rtc", NULL), OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART0_BASE, - "uart0", &integrator_uart_data), + "uart0", &ap_uart_data), OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART1_BASE, - "uart1", &integrator_uart_data), + "uart1", &ap_uart_data), OF_DEV_AUXDATA("arm,primecell", KMI0_BASE, "kmi0", NULL), OF_DEV_AUXDATA("arm,primecell", KMI1_BASE, diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index c4b6af9a4239..29df06b35d0d 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -306,9 +306,9 @@ static struct of_dev_auxdata intcp_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_RTC_BASE, "rtc", NULL), OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART0_BASE, - "uart0", &integrator_uart_data), + "uart0", NULL), OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART1_BASE, - "uart1", &integrator_uart_data), + "uart1", NULL), OF_DEV_AUXDATA("arm,primecell", KMI0_BASE, "kmi0", NULL), OF_DEV_AUXDATA("arm,primecell", KMI1_BASE, diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c index bbeca59df66b..000edcda4596 100644 --- a/arch/arm/mach-integrator/pci_v3.c +++ b/arch/arm/mach-integrator/pci_v3.c @@ -388,9 +388,10 @@ static int __init pci_v3_setup_resources(struct pci_sys_data *sys) * means I can't get additional information on the reason for the pm2fb * problems. I suppose I'll just have to mind-meld with the machine. ;) */ -#define SC_PCI __io_address(INTEGRATOR_SC_PCIENABLE) -#define SC_LBFADDR __io_address(INTEGRATOR_SC_BASE + 0x20) -#define SC_LBFCODE __io_address(INTEGRATOR_SC_BASE + 0x24) +static void __iomem *ap_syscon_base; +#define INTEGRATOR_SC_PCIENABLE_OFFSET 0x18 +#define INTEGRATOR_SC_LBFADDR_OFFSET 0x20 +#define INTEGRATOR_SC_LBFCODE_OFFSET 0x24 static int v3_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) @@ -401,13 +402,13 @@ v3_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) char buf[128]; sprintf(buf, "V3 fault: addr 0x%08lx, FSR 0x%03x, PC 0x%08lx [%08lx] LBFADDR=%08x LBFCODE=%02x ISTAT=%02x\n", - addr, fsr, pc, instr, __raw_readl(SC_LBFADDR), __raw_readl(SC_LBFCODE) & 255, + addr, fsr, pc, instr, __raw_readl(ap_syscon_base + INTEGRATOR_SC_LBFADDR_OFFSET), __raw_readl(ap_syscon_base + INTEGRATOR_SC_LBFCODE_OFFSET) & 255, v3_readb(V3_LB_ISTAT)); printk(KERN_DEBUG "%s", buf); #endif v3_writeb(V3_LB_ISTAT, 0); - __raw_writel(3, SC_PCI); + __raw_writel(3, ap_syscon_base + INTEGRATOR_SC_PCIENABLE_OFFSET); /* * If the instruction being executed was a read, @@ -449,15 +450,15 @@ static irqreturn_t v3_irq(int dummy, void *devid) sprintf(buf, "V3 int %d: pc=0x%08lx [%08lx] LBFADDR=%08x LBFCODE=%02x " "ISTAT=%02x\n", IRQ_AP_V3INT, pc, instr, - __raw_readl(SC_LBFADDR), - __raw_readl(SC_LBFCODE) & 255, + __raw_readl(ap_syscon_base + INTEGRATOR_SC_LBFADDR_OFFSET), + __raw_readl(ap_syscon_base + INTEGRATOR_SC_LBFCODE_OFFSET) & 255, v3_readb(V3_LB_ISTAT)); printascii(buf); #endif v3_writew(V3_PCI_STAT, 0xf000); v3_writeb(V3_LB_ISTAT, 0); - __raw_writel(3, SC_PCI); + __raw_writel(3, ap_syscon_base + INTEGRATOR_SC_PCIENABLE_OFFSET); #ifdef CONFIG_DEBUG_LL /* @@ -480,6 +481,10 @@ int __init pci_v3_setup(int nr, struct pci_sys_data *sys) if (nr == 0) { sys->mem_offset = PHYS_PCI_MEM_BASE; ret = pci_v3_setup_resources(sys); + /* Remap the Integrator system controller */ + ap_syscon_base = ioremap(INTEGRATOR_SC_BASE, 0x100); + if (!ap_syscon_base) + return -EINVAL; } return ret; @@ -568,7 +573,7 @@ void __init pci_v3_preinit(void) v3_writeb(V3_LB_ISTAT, 0); v3_writew(V3_LB_CFG, v3_readw(V3_LB_CFG) | (1 << 10)); v3_writeb(V3_LB_IMASK, 0x28); - __raw_writel(3, SC_PCI); + __raw_writel(3, ap_syscon_base + INTEGRATOR_SC_PCIENABLE_OFFSET); /* * Grab the PCI error interrupt. |