summaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi5
-rw-r--r--arch/arm/boot/dts/broadcom/bcm2711.dtsi14
-rw-r--r--arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi2
-rw-r--r--arch/arm64/boot/dts/qcom/msm8916.dtsi9
-rw-r--r--arch/arm64/boot/dts/qcom/msm8939.dtsi12
-rw-r--r--arch/arm64/boot/dts/qcom/msm8996.dtsi43
-rw-r--r--arch/arm64/boot/dts/qcom/msm8998.dtsi5
-rw-r--r--arch/arm64/boot/dts/qcom/qcs404.dtsi9
-rw-r--r--arch/arm64/boot/dts/qcom/qrb5165-rb5.dts2
-rw-r--r--arch/arm64/boot/dts/qcom/sdm630.dtsi53
10 files changed, 50 insertions, 104 deletions
diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi b/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi
index 98817a6675b9..d233a191c139 100644
--- a/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi.dtsi
@@ -1,6 +1,7 @@
// SPDX-License-Identifier: GPL-2.0
#include "bcm2835-rpi.dtsi"
+#include <dt-bindings/power/raspberrypi-power.h>
#include <dt-bindings/reset/raspberrypi,firmware-reset.h>
/ {
@@ -76,3 +77,7 @@
&vchiq {
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
};
+
+&xhci {
+ power-domains = <&power RPI_POWER_DOMAIN_USB>;
+};
diff --git a/arch/arm/boot/dts/broadcom/bcm2711.dtsi b/arch/arm/boot/dts/broadcom/bcm2711.dtsi
index 4a379a14966d..22c7f1561344 100644
--- a/arch/arm/boot/dts/broadcom/bcm2711.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm2711.dtsi
@@ -604,6 +604,20 @@
};
};
+ xhci: usb@7e9c0000 {
+ compatible = "brcm,bcm2711-xhci", "brcm,xhci-brcm-v2";
+ reg = <0x0 0x7e9c0000 0x100000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+ /* DWC2 and this IP block share the same USB PHY,
+ * enabling both at the same time results in lockups.
+ * So keep this node disabled and let the bootloader
+ * decide which interface should be enabled.
+ */
+ status = "disabled";
+ };
+
v3d: gpu@7ec00000 {
compatible = "brcm,2711-v3d";
reg = <0x0 0x7ec00000 0x4000>,
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
index bbdcd441c049..3c6079edda19 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
@@ -1294,6 +1294,7 @@
&xhci0 {
status = "okay";
+ rx-fifo-depth = <3072>;
vusb33-supply = <&mt6359_vusb_ldo_reg>;
vbus-supply = <&usb_vbus>;
};
@@ -1301,6 +1302,7 @@
&xhci1 {
status = "okay";
+ rx-fifo-depth = <3072>;
vusb33-supply = <&mt6359_vusb_ldo_reg>;
vbus-supply = <&usb_vbus>;
};
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 7f8327b0dbdb..e423c57ddd41 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -540,9 +540,6 @@
compatible = "qcom,msm8916-bimc";
reg = <0x00400000 0x62000>;
#interconnect-cells = <1>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
- <&rpmcc RPM_SMD_BIMC_A_CLK>;
};
tsens: thermal-sensor@4a9000 {
@@ -575,18 +572,12 @@
compatible = "qcom,msm8916-pcnoc";
reg = <0x00500000 0x11000>;
#interconnect-cells = <1>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
- <&rpmcc RPM_SMD_PCNOC_A_CLK>;
};
snoc: interconnect@580000 {
compatible = "qcom,msm8916-snoc";
reg = <0x00580000 0x14000>;
#interconnect-cells = <1>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
- <&rpmcc RPM_SMD_SNOC_A_CLK>;
};
stm: stm@802000 {
diff --git a/arch/arm64/boot/dts/qcom/msm8939.dtsi b/arch/arm64/boot/dts/qcom/msm8939.dtsi
index 29f6bd9df2eb..82d85ff61045 100644
--- a/arch/arm64/boot/dts/qcom/msm8939.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8939.dtsi
@@ -602,9 +602,6 @@
bimc: interconnect@400000 {
compatible = "qcom,msm8939-bimc";
reg = <0x00400000 0x62000>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
- <&rpmcc RPM_SMD_BIMC_A_CLK>;
#interconnect-cells = <1>;
};
@@ -648,25 +645,16 @@
pcnoc: interconnect@500000 {
compatible = "qcom,msm8939-pcnoc";
reg = <0x00500000 0x11000>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
- <&rpmcc RPM_SMD_PCNOC_A_CLK>;
#interconnect-cells = <1>;
};
snoc: interconnect@580000 {
compatible = "qcom,msm8939-snoc";
reg = <0x00580000 0x14080>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
- <&rpmcc RPM_SMD_SNOC_A_CLK>;
#interconnect-cells = <1>;
snoc_mm: interconnect-snoc {
compatible = "qcom,msm8939-snoc-mm";
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_SYSMMNOC_CLK>,
- <&rpmcc RPM_SMD_SYSMMNOC_A_CLK>;
#interconnect-cells = <1>;
};
};
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 8c6a7efa90c4..8d41ed261adf 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -838,9 +838,6 @@
compatible = "qcom,msm8996-bimc";
reg = <0x00408000 0x5a000>;
#interconnect-cells = <1>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
- <&rpmcc RPM_SMD_BIMC_A_CLK>;
};
tsens0: thermal-sensor@4a9000 {
@@ -891,18 +888,12 @@
compatible = "qcom,msm8996-cnoc";
reg = <0x00500000 0x1000>;
#interconnect-cells = <1>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
- <&rpmcc RPM_SMD_CNOC_A_CLK>;
};
snoc: interconnect@524000 {
compatible = "qcom,msm8996-snoc";
reg = <0x00524000 0x1c000>;
#interconnect-cells = <1>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
- <&rpmcc RPM_SMD_SNOC_A_CLK>;
};
a0noc: interconnect@543000 {
@@ -922,19 +913,14 @@
compatible = "qcom,msm8996-a1noc";
reg = <0x00562000 0x5000>;
#interconnect-cells = <1>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_AGGR1_NOC_CLK>,
- <&rpmcc RPM_SMD_AGGR1_NOC_A_CLK>;
};
a2noc: interconnect@583000 {
compatible = "qcom,msm8996-a2noc";
reg = <0x00583000 0x7000>;
#interconnect-cells = <1>;
- clock-names = "bus", "bus_a", "aggre2_ufs_axi", "ufs_axi";
- clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>,
- <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>,
- <&gcc GCC_AGGRE2_UFS_AXI_CLK>,
+ clock-names = "aggre2_ufs_axi", "ufs_axi";
+ clocks = <&gcc GCC_AGGRE2_UFS_AXI_CLK>,
<&gcc GCC_UFS_AXI_CLK>;
};
@@ -942,19 +928,14 @@
compatible = "qcom,msm8996-mnoc";
reg = <0x005a4000 0x1c000>;
#interconnect-cells = <1>;
- clock-names = "bus", "bus_a", "iface";
- clocks = <&rpmcc RPM_SMD_MMAXI_CLK>,
- <&rpmcc RPM_SMD_MMAXI_A_CLK>,
- <&mmcc AHB_CLK_SRC>;
+ clock-names = "iface";
+ clocks = <&mmcc AHB_CLK_SRC>;
};
pnoc: interconnect@5c0000 {
compatible = "qcom,msm8996-pnoc";
reg = <0x005c0000 0x3000>;
#interconnect-cells = <1>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
- <&rpmcc RPM_SMD_PCNOC_A_CLK>;
};
tcsr_mutex: hwlock@740000 {
@@ -2486,9 +2467,8 @@
"handover",
"stop-ack";
- clocks = <&xo_board>,
- <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
- clock-names = "xo", "aggre2";
+ clocks = <&xo_board>;
+ clock-names = "xo";
memory-region = <&slpi_mem>;
@@ -2533,10 +2513,15 @@
<&gcc GCC_MSS_GPLL0_DIV_CLK>,
<&gcc GCC_MSS_SNOC_AXI_CLK>,
<&gcc GCC_MSS_MNOC_BIMC_AXI_CLK>,
- <&rpmcc RPM_SMD_PCNOC_CLK>,
<&rpmcc RPM_SMD_QDSS_CLK>;
- clock-names = "iface", "bus", "mem", "xo", "gpll0_mss",
- "snoc_axi", "mnoc_axi", "pnoc", "qdss";
+ clock-names = "iface",
+ "bus",
+ "mem",
+ "xo",
+ "gpll0_mss",
+ "snoc_axi",
+ "mnoc_axi",
+ "qdss";
resets = <&gcc GCC_MSS_RESTART>;
reset-names = "mss_restart";
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index bb591c6bf573..2793cc22d381 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -1605,9 +1605,8 @@
px-supply = <&vreg_lvs2a_1p8>;
- clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
- <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
- clock-names = "xo", "aggre2";
+ clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+ clock-names = "xo";
memory-region = <&slpi_mem>;
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index 6ac64ce9bb68..2f2eeaf2e945 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -558,9 +558,6 @@
reg = <0x00400000 0x80000>;
compatible = "qcom,qcs404-bimc";
#interconnect-cells = <1>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
- <&rpmcc RPM_SMD_BIMC_A_CLK>;
};
tsens: thermal-sensor@4a9000 {
@@ -601,18 +598,12 @@
reg = <0x00500000 0x15080>;
compatible = "qcom,qcs404-pcnoc";
#interconnect-cells = <1>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
- <&rpmcc RPM_SMD_PNOC_A_CLK>;
};
snoc: interconnect@580000 {
reg = <0x00580000 0x23080>;
compatible = "qcom,qcs404-snoc";
#interconnect-cells = <1>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
- <&rpmcc RPM_SMD_SNOC_A_CLK>;
};
remoteproc_cdsp: remoteproc@b00000 {
diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
index 043184557873..cd0db4f31d4a 100644
--- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
+++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
@@ -1454,7 +1454,7 @@
altmodes {
displayport {
- svid = <0xff01>;
+ svid = /bits/ 16 <0xff01>;
vdo = <0x00001c46>;
};
};
diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index 775700f78e0f..513fe5e76b68 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -606,9 +606,6 @@
compatible = "qcom,sdm660-bimc";
reg = <0x01008000 0x78000>;
#interconnect-cells = <1>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
- <&rpmcc RPM_SMD_BIMC_A_CLK>;
};
restart@10ac000 {
@@ -620,28 +617,17 @@
compatible = "qcom,sdm660-cnoc";
reg = <0x01500000 0x10000>;
#interconnect-cells = <1>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
- <&rpmcc RPM_SMD_CNOC_A_CLK>;
};
snoc: interconnect@1626000 {
compatible = "qcom,sdm660-snoc";
reg = <0x01626000 0x7090>;
#interconnect-cells = <1>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
- <&rpmcc RPM_SMD_SNOC_A_CLK>;
};
anoc2_smmu: iommu@16c0000 {
compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2";
reg = <0x016c0000 0x40000>;
-
- assigned-clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
- assigned-clock-rates = <1000>;
- clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
- clock-names = "bus";
#global-interrupts = <2>;
#iommu-cells = <1>;
@@ -686,16 +672,12 @@
compatible = "qcom,sdm660-a2noc";
reg = <0x01704000 0xc100>;
#interconnect-cells = <1>;
- clock-names = "bus",
- "bus_a",
- "ipa",
+ clock-names = "ipa",
"ufs_axi",
"aggre2_ufs_axi",
"aggre2_usb3_axi",
"cfg_noc_usb2_axi";
- clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>,
- <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>,
- <&rpmcc RPM_SMD_IPA_CLK>,
+ clocks = <&rpmcc RPM_SMD_IPA_CLK>,
<&gcc GCC_UFS_AXI_CLK>,
<&gcc GCC_AGGRE2_UFS_AXI_CLK>,
<&gcc GCC_AGGRE2_USB3_AXI_CLK>,
@@ -706,10 +688,8 @@
compatible = "qcom,sdm660-mnoc";
reg = <0x01745000 0xa010>;
#interconnect-cells = <1>;
- clock-names = "bus", "bus_a", "iface";
- clocks = <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK>,
- <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK_A>,
- <&mmcc AHB_CLK_SRC>;
+ clock-names = "iface";
+ clocks = <&mmcc AHB_CLK_SRC>;
};
tsens: thermal-sensor@10ae000 {
@@ -1186,7 +1166,9 @@
clocks = <&gcc GCC_GPU_CFG_AHB_CLK>,
<&gcc GCC_BIMC_GFX_CLK>,
<&gcc GCC_GPU_BIMC_GFX_CLK>;
- clock-names = "iface", "mem", "mem_iface";
+ clock-names = "iface",
+ "mem",
+ "mem_iface";
#global-interrupts = <2>;
#iommu-cells = <1>;
@@ -1288,20 +1270,16 @@
<&gcc GCC_USB30_MASTER_CLK>,
<&gcc GCC_AGGRE2_USB3_AXI_CLK>,
<&gcc GCC_USB30_SLEEP_CLK>,
- <&gcc GCC_USB30_MOCK_UTMI_CLK>,
- <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
+ <&gcc GCC_USB30_MOCK_UTMI_CLK>;
clock-names = "cfg_noc",
"core",
"iface",
"sleep",
- "mock_utmi",
- "bus";
+ "mock_utmi";
assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
- <&gcc GCC_USB30_MASTER_CLK>,
- <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
- assigned-clock-rates = <19200000>, <120000000>,
- <19200000>;
+ <&gcc GCC_USB30_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <120000000>;
interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
@@ -2204,10 +2182,9 @@
clocks = <&mmcc MNOC_AHB_CLK>,
<&mmcc BIMC_SMMU_AHB_CLK>,
- <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK>,
<&mmcc BIMC_SMMU_AXI_CLK>;
clock-names = "iface-mm", "iface-smmu",
- "bus-mm", "bus-smmu";
+ "bus-smmu";
#global-interrupts = <2>;
#iommu-cells = <1>;
@@ -2324,12 +2301,6 @@
compatible = "qcom,sdm660-gnoc";
reg = <0x17900000 0xe000>;
#interconnect-cells = <1>;
- /*
- * This one apparently features no clocks,
- * so let's not mess with the driver needlessly
- */
- clock-names = "bus", "bus_a";
- clocks = <&xo_board>, <&xo_board>;
};
apcs_glb: mailbox@17911000 {