summaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/common/it8152.c2
-rw-r--r--arch/arm/common/vic.c2
-rw-r--r--arch/arm/mach-at91/board-ecbat91.c6
-rw-r--r--arch/arm/mach-bcmring/csp/chipc/chipcHw.c2
-rw-r--r--arch/arm/mach-bcmring/csp/dmac/dmacHw.c2
-rw-r--r--arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c2
-rw-r--r--arch/arm/mach-bcmring/csp/tmr/tmrHw.c2
-rw-r--r--arch/arm/mach-bcmring/dma.c2
-rw-r--r--arch/arm/mach-bcmring/include/csp/dmacHw.h2
-rw-r--r--arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h2
-rw-r--r--arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h2
-rw-r--r--arch/arm/mach-gemini/include/mach/hardware.h2
-rw-r--r--arch/arm/mach-msm/io.c2
-rw-r--r--arch/arm/mach-omap2/cpuidle34xx.c2
-rw-r--r--arch/arm/mach-omap2/serial.c2
-rw-r--r--arch/arm/mach-pxa/mxm8x10.c2
-rw-r--r--arch/arm/mach-s3c64xx/dma.c2
-rw-r--r--arch/arm/mach-spear3xx/spear300.c4
-rw-r--r--arch/arm/mach-spear3xx/spear310.c2
-rw-r--r--arch/arm/mach-spear3xx/spear320.c2
-rw-r--r--arch/arm/mach-spear3xx/spear3xx.c6
-rw-r--r--arch/arm/mach-spear6xx/spear6xx.c4
-rw-r--r--arch/arm/mach-u300/Kconfig2
-rw-r--r--arch/arm/mach-u300/include/mach/coh901318.h4
-rw-r--r--arch/arm/plat-mxc/include/mach/irqs.h2
-rw-r--r--arch/arm/plat-omap/include/plat/omap_hwmod.h2
-rw-r--r--arch/blackfin/mach-bf518/include/mach/defBF51x_base.h2
-rw-r--r--arch/blackfin/mach-bf527/include/mach/defBF52x_base.h2
-rw-r--r--arch/blackfin/mach-bf537/include/mach/defBF534.h2
-rw-r--r--arch/blackfin/mach-bf538/include/mach/defBF539.h2
-rw-r--r--arch/cris/arch-v32/lib/nand_init.S2
-rw-r--r--arch/cris/include/asm/etraxgpio.h2
-rw-r--r--arch/h8300/Kconfig.debug2
-rw-r--r--arch/ia64/kvm/mmio.c2
-rw-r--r--arch/mips/alchemy/common/power.c2
-rw-r--r--arch/mips/include/asm/mach-powertv/ioremap.h2
-rw-r--r--arch/mips/jz4740/board-qi_lb60.c4
-rw-r--r--arch/mips/jz4740/gpio.c2
-rw-r--r--arch/mips/mti-malta/malta-memory.c2
-rw-r--r--arch/mips/pci/pcie-octeon.c2
-rw-r--r--arch/mips/powertv/memory.c2
-rw-r--r--arch/mips/txx9/generic/pci.c2
-rw-r--r--arch/powerpc/include/asm/8xx_immap.h4
-rw-r--r--arch/powerpc/oprofile/op_model_cell.c2
-rw-r--r--arch/powerpc/platforms/83xx/suspend-asm.S6
-rw-r--r--arch/powerpc/platforms/ps3/device-init.c4
-rw-r--r--arch/powerpc/platforms/ps3/interrupt.c2
-rw-r--r--arch/sh/mm/cache-sh5.c2
-rw-r--r--arch/sparc/kernel/traps_64.c2
-rw-r--r--arch/x86/include/asm/pgalloc.h2
-rw-r--r--arch/x86/include/asm/processor.h2
-rw-r--r--arch/x86/kernel/amd_iommu.c4
-rw-r--r--arch/x86/kernel/early_printk_mrst.c2
-rw-r--r--arch/x86/kernel/head_32.S2
54 files changed, 67 insertions, 67 deletions
diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c
index 1bec96e85196..60dc077ea7cc 100644
--- a/arch/arm/common/it8152.c
+++ b/arch/arm/common/it8152.c
@@ -236,7 +236,7 @@ static struct resource it8152_mem = {
/*
* The following functions are needed for DMA bouncing.
- * ITE8152 chip can addrees up to 64MByte, so all the devices
+ * ITE8152 chip can address up to 64MByte, so all the devices
* connected to ITE8152 (PCI and USB) should have limited DMA window
*/
diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index ba65f6eedca6..cb660bc54d7a 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -70,7 +70,7 @@ static inline struct vic_device *to_vic(struct sys_device *sys)
* vic_init2 - common initialisation code
* @base: Base of the VIC.
*
- * Common initialisation code for registeration
+ * Common initialisation code for registration
* and resume.
*/
static void vic_init2(void __iomem *base)
diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c
index 7b58c948a957..de2fd04e7c8a 100644
--- a/arch/arm/mach-at91/board-ecbat91.c
+++ b/arch/arm/mach-at91/board-ecbat91.c
@@ -128,17 +128,17 @@ static struct spi_board_info __initdata ecb_at91spi_devices[] = {
.platform_data = &my_flash0_platform,
#endif
},
- { /* User accessable spi - cs1 (250KHz) */
+ { /* User accessible spi - cs1 (250KHz) */
.modalias = "spi-cs1",
.chip_select = 1,
.max_speed_hz = 250 * 1000,
},
- { /* User accessable spi - cs2 (1MHz) */
+ { /* User accessible spi - cs2 (1MHz) */
.modalias = "spi-cs2",
.chip_select = 2,
.max_speed_hz = 1 * 1000 * 1000,
},
- { /* User accessable spi - cs3 (10MHz) */
+ { /* User accessible spi - cs3 (10MHz) */
.modalias = "spi-cs3",
.chip_select = 3,
.max_speed_hz = 10 * 1000 * 1000,
diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw.c
index b3a61d860c65..96273ff34956 100644
--- a/arch/arm/mach-bcmring/csp/chipc/chipcHw.c
+++ b/arch/arm/mach-bcmring/csp/chipc/chipcHw.c
@@ -757,7 +757,7 @@ static int chipcHw_divide(int num, int denom)
t = t << 1;
}
- /* Intialize the result */
+ /* Initialize the result */
r = 0;
do {
diff --git a/arch/arm/mach-bcmring/csp/dmac/dmacHw.c b/arch/arm/mach-bcmring/csp/dmac/dmacHw.c
index 7b9bac2d79a5..6b9be2e98e51 100644
--- a/arch/arm/mach-bcmring/csp/dmac/dmacHw.c
+++ b/arch/arm/mach-bcmring/csp/dmac/dmacHw.c
@@ -893,7 +893,7 @@ int dmacHw_setDataDescriptor(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration
*/
/****************************************************************************/
uint32_t dmacHw_getDmaControllerAttribute(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
- dmacHw_CONTROLLER_ATTRIB_e attr /* [ IN ] DMA Controler attribute of type dmacHw_CONTROLLER_ATTRIB_e */
+ dmacHw_CONTROLLER_ATTRIB_e attr /* [ IN ] DMA Controller attribute of type dmacHw_CONTROLLER_ATTRIB_e */
) {
dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
diff --git a/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c b/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c
index ff7b436d0935..77f84b40dda9 100644
--- a/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c
+++ b/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c
@@ -316,7 +316,7 @@ static void DisplayDescRing(void *pDescriptor, /* [ IN ] Descriptor buffer */
/**
* @brief Check if DMA channel is the flow controller
*
-* @return 1 : If DMA is a flow controler
+* @return 1 : If DMA is a flow controller
* 0 : Peripheral is the flow controller
*
* @note
diff --git a/arch/arm/mach-bcmring/csp/tmr/tmrHw.c b/arch/arm/mach-bcmring/csp/tmr/tmrHw.c
index 5c1c9a0e5ed2..16225e43f3c3 100644
--- a/arch/arm/mach-bcmring/csp/tmr/tmrHw.c
+++ b/arch/arm/mach-bcmring/csp/tmr/tmrHw.c
@@ -558,7 +558,7 @@ static int tmrHw_divide(int num, int denom)
t = t << 1;
}
- /* Intialize the result */
+ /* Initialize the result */
r = 0;
do {
diff --git a/arch/arm/mach-bcmring/dma.c b/arch/arm/mach-bcmring/dma.c
index 77eb35c89cd0..8d1baf3f4683 100644
--- a/arch/arm/mach-bcmring/dma.c
+++ b/arch/arm/mach-bcmring/dma.c
@@ -671,7 +671,7 @@ static int ConfigChannel(DMA_Handle_t handle)
/****************************************************************************/
/**
-* Intializes all of the data structures associated with the DMA.
+* Initializes all of the data structures associated with the DMA.
* @return
* >= 0 - Initialization was successfull.
*
diff --git a/arch/arm/mach-bcmring/include/csp/dmacHw.h b/arch/arm/mach-bcmring/include/csp/dmacHw.h
index 5d510130a25f..6c8da2b9fc1f 100644
--- a/arch/arm/mach-bcmring/include/csp/dmacHw.h
+++ b/arch/arm/mach-bcmring/include/csp/dmacHw.h
@@ -590,7 +590,7 @@ void dmacHw_printDebugInfo(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle
*/
/****************************************************************************/
uint32_t dmacHw_getDmaControllerAttribute(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
- dmacHw_CONTROLLER_ATTRIB_e attr /* [ IN ] DMA Controler attribute of type dmacHw_CONTROLLER_ATTRIB_e */
+ dmacHw_CONTROLLER_ATTRIB_e attr /* [ IN ] DMA Controller attribute of type dmacHw_CONTROLLER_ATTRIB_e */
);
#endif /* _DMACHW_H */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
index cbf334d1c761..d67e2f8c22de 100644
--- a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
+++ b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
@@ -28,7 +28,7 @@
/* Data type for DMA Link List Item */
typedef struct {
- uint32_t sar; /* Source Adress Register.
+ uint32_t sar; /* Source Address Register.
Address must be aligned to CTLx.SRC_TR_WIDTH. */
uint32_t dar; /* Destination Address Register.
Address must be aligned to CTLx.DST_TR_WIDTH. */
diff --git a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h
index 891cea87e333..f1ecf96f2da5 100644
--- a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h
+++ b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h
@@ -35,7 +35,7 @@ typedef struct {
/* Data type representing DMA channel registers */
typedef struct {
- dmacHw_REG64_t ChannelSar; /* Source Adress Register. 64 bits (upper 32 bits are reserved)
+ dmacHw_REG64_t ChannelSar; /* Source Address Register. 64 bits (upper 32 bits are reserved)
Address must be aligned to CTLx.SRC_TR_WIDTH.
*/
dmacHw_REG64_t ChannelDar; /* Destination Address Register.64 bits (upper 32 bits are reserved)
diff --git a/arch/arm/mach-gemini/include/mach/hardware.h b/arch/arm/mach-gemini/include/mach/hardware.h
index 213a4fcfeb1c..8c950e1d06be 100644
--- a/arch/arm/mach-gemini/include/mach/hardware.h
+++ b/arch/arm/mach-gemini/include/mach/hardware.h
@@ -33,7 +33,7 @@
#define GEMINI_LPC_HOST_BASE 0x47000000
#define GEMINI_LPC_IO_BASE 0x47800000
#define GEMINI_INTERRUPT_BASE 0x48000000
-/* TODO: Different interrupt controlers when SMP
+/* TODO: Different interrupt controllers when SMP
* #define GEMINI_INTERRUPT0_BASE 0x48000000
* #define GEMINI_INTERRUPT1_BASE 0x49000000
*/
diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c
index d36b61074146..7f8d15d56834 100644
--- a/arch/arm/mach-msm/io.c
+++ b/arch/arm/mach-msm/io.c
@@ -153,7 +153,7 @@ __msm_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype)
{
if (mtype == MT_DEVICE) {
/* The peripherals in the 88000000 - D0000000 range
- * are only accessable by type MT_DEVICE_NONSHARED.
+ * are only accessible by type MT_DEVICE_NONSHARED.
* Adjust mtype as necessary to make this "just work."
*/
if ((phys_addr >= 0x88000000) && (phys_addr < 0xD0000000))
diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c
index 0d50b45d041c..1e6fe6d11aee 100644
--- a/arch/arm/mach-omap2/cpuidle34xx.c
+++ b/arch/arm/mach-omap2/cpuidle34xx.c
@@ -252,7 +252,7 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev,
* FIXME: we currently manage device-specific idle states
* for PER and CORE in combination with CPU-specific
* idle states. This is wrong, and device-specific
- * idle managment needs to be separated out into
+ * idle management needs to be separated out into
* its own code.
*/
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index becf0e38ef7e..db79ac68ed97 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -843,7 +843,7 @@ void __init omap_serial_init_port(int port)
}
/**
- * omap_serial_init() - intialize all supported serial ports
+ * omap_serial_init() - initialize all supported serial ports
*
* Initializes all available UARTs as serial ports. Platforms
* can call this function when they want to have default behaviour
diff --git a/arch/arm/mach-pxa/mxm8x10.c b/arch/arm/mach-pxa/mxm8x10.c
index 462167ac05f9..cdf7f41e2bb3 100644
--- a/arch/arm/mach-pxa/mxm8x10.c
+++ b/arch/arm/mach-pxa/mxm8x10.c
@@ -337,7 +337,7 @@ void __init mxm_8x10_mmc_init(void)
}
#endif
-/* USB Open Host Controler Interface */
+/* USB Open Host Controller Interface */
static struct pxaohci_platform_data mxm_8x10_ohci_platform_data = {
.port_mode = PMM_NPS_MODE,
.flags = ENABLE_PORT_ALL
diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c
index e7d03ab41d80..372ea6855454 100644
--- a/arch/arm/mach-s3c64xx/dma.c
+++ b/arch/arm/mach-s3c64xx/dma.c
@@ -740,7 +740,7 @@ static int __init s3c64xx_dma_init(void)
/* Set all DMA configuration to be DMA, not SDMA */
writel(0xffffff, S3C_SYSREG(0x110));
- /* Register standard DMA controlers */
+ /* Register standard DMA controllers */
s3c64xx_dma_init1(0, DMACH_UART0, IRQ_DMA0, 0x75000000);
s3c64xx_dma_init1(8, DMACH_PCM1_TX, IRQ_DMA1, 0x75100000);
diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c
index 3560f8c1e723..5aa2d54ebfaa 100644
--- a/arch/arm/mach-spear3xx/spear300.c
+++ b/arch/arm/mach-spear3xx/spear300.c
@@ -371,7 +371,7 @@ struct pmx_driver pmx_driver = {
};
/* Add spear300 specific devices here */
-/* arm gpio1 device registeration */
+/* arm gpio1 device registration */
static struct pl061_platform_data gpio1_plat_data = {
.gpio_base = 8,
.irq_base = SPEAR_GPIO1_INT_BASE,
@@ -451,7 +451,7 @@ void __init spear300_init(void)
/* call spear3xx family common init function */
spear3xx_init();
- /* shared irq registeration */
+ /* shared irq registration */
shirq_ras1.regs.base =
ioremap(SPEAR300_TELECOM_BASE, SPEAR300_TELECOM_REG_SIZE);
if (shirq_ras1.regs.base) {
diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c
index 96a1ab824bac..53b41b52d7ee 100644
--- a/arch/arm/mach-spear3xx/spear310.c
+++ b/arch/arm/mach-spear3xx/spear310.c
@@ -266,7 +266,7 @@ void __init spear310_init(void)
/* call spear3xx family common init function */
spear3xx_init();
- /* shared irq registeration */
+ /* shared irq registration */
base = ioremap(SPEAR310_SOC_CONFIG_BASE, SPEAR310_SOC_CONFIG_SIZE);
if (base) {
/* shirq 1 */
diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c
index 6a1219549369..88b465284c36 100644
--- a/arch/arm/mach-spear3xx/spear320.c
+++ b/arch/arm/mach-spear3xx/spear320.c
@@ -519,7 +519,7 @@ void __init spear320_init(void)
/* call spear3xx family common init function */
spear3xx_init();
- /* shared irq registeration */
+ /* shared irq registration */
base = ioremap(SPEAR320_SOC_CONFIG_BASE, SPEAR320_SOC_CONFIG_SIZE);
if (base) {
/* shirq 1 */
diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c
index e87313aeae20..52f553c8c46d 100644
--- a/arch/arm/mach-spear3xx/spear3xx.c
+++ b/arch/arm/mach-spear3xx/spear3xx.c
@@ -22,7 +22,7 @@
#include <mach/spear.h>
/* Add spear3xx machines common devices here */
-/* gpio device registeration */
+/* gpio device registration */
static struct pl061_platform_data gpio_plat_data = {
.gpio_base = 0,
.irq_base = SPEAR_GPIO_INT_BASE,
@@ -41,7 +41,7 @@ struct amba_device gpio_device = {
.irq = {IRQ_BASIC_GPIO, NO_IRQ},
};
-/* uart device registeration */
+/* uart device registration */
struct amba_device uart_device = {
.dev = {
.init_name = "uart",
@@ -543,6 +543,6 @@ void spear_pmx_init(struct pmx_driver *pmx_driver, uint base, uint size)
pmx_fail:
if (ret)
- printk(KERN_ERR "padmux: registeration failed. err no: %d\n",
+ printk(KERN_ERR "padmux: registration failed. err no: %d\n",
ret);
}
diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c
index baf6bcc3169c..f2fe14e8471d 100644
--- a/arch/arm/mach-spear6xx/spear6xx.c
+++ b/arch/arm/mach-spear6xx/spear6xx.c
@@ -23,7 +23,7 @@
#include <mach/spear.h>
/* Add spear6xx machines common devices here */
-/* uart device registeration */
+/* uart device registration */
struct amba_device uart_device[] = {
{
.dev = {
@@ -50,7 +50,7 @@ struct amba_device uart_device[] = {
}
};
-/* gpio device registeration */
+/* gpio device registration */
static struct pl061_platform_data gpio_plat_data[] = {
{
.gpio_base = 0,
diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig
index 801b21e7f677..32a7b0f7e9f7 100644
--- a/arch/arm/mach-u300/Kconfig
+++ b/arch/arm/mach-u300/Kconfig
@@ -64,7 +64,7 @@ config MACH_U300_DUAL_RAM
bool "Dual RAM"
help
Select this if you want support for Dual RAM phones.
- This is two RAM memorys on different EMIFs.
+ This is two RAM memories on different EMIFs.
endchoice
config U300_DEBUG
diff --git a/arch/arm/mach-u300/include/mach/coh901318.h b/arch/arm/mach-u300/include/mach/coh901318.h
index 193da2df732c..6193aaa47794 100644
--- a/arch/arm/mach-u300/include/mach/coh901318.h
+++ b/arch/arm/mach-u300/include/mach/coh901318.h
@@ -24,7 +24,7 @@
* @src_addr: transfer source address
* @dst_addr: transfer destination address
* @link_addr: physical address to next lli
- * @virt_link_addr: virtual addres of next lli (only used by pool_free)
+ * @virt_link_addr: virtual address of next lli (only used by pool_free)
* @phy_this: physical address of current lli (only used by pool_free)
*/
struct coh901318_lli {
@@ -90,7 +90,7 @@ struct powersave {
* struct coh901318_platform - platform arch structure
* @chans_slave: specifying dma slave channels
* @chans_memcpy: specifying dma memcpy channels
- * @access_memory_state: requesting DMA memeory access (on / off)
+ * @access_memory_state: requesting DMA memory access (on / off)
* @chan_conf: dma channel configurations
* @max_channels: max number of dma chanenls
*/
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
index 86781f7b0c0c..664c453babbe 100644
--- a/arch/arm/plat-mxc/include/mach/irqs.h
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -66,7 +66,7 @@ extern int imx_irq_set_priority(unsigned char irq, unsigned char prio);
/* all normal IRQs can be FIQs */
#define FIQ_START 0
-/* switch betwean IRQ and FIQ */
+/* switch between IRQ and FIQ */
extern int mxc_set_irq_fiq(unsigned int irq, unsigned int type);
#endif /* __ASM_ARCH_MXC_IRQS_H__ */
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index 7eaa8edf3b14..79ac24ceb54d 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -339,7 +339,7 @@ struct omap_hwmod_omap2_prcm {
/**
* struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data
* @clkctrl_reg: PRCM address of the clock control register
- * @rstctrl_reg: adress of the XXX_RSTCTRL register located in the PRM
+ * @rstctrl_reg: address of the XXX_RSTCTRL register located in the PRM
* @submodule_wkdep_bit: bit shift of the WKDEP range
*/
struct omap_hwmod_omap4_prcm {
diff --git a/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h b/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h
index 5f84913dcd91..750f4d803845 100644
--- a/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h
+++ b/arch/blackfin/mach-bf518/include/mach/defBF51x_base.h
@@ -1197,7 +1197,7 @@
#define SADD_LEN 0x0002 /* Slave Address Length */
#define STDVAL 0x0004 /* Slave Transmit Data Valid */
#define NAK 0x0008 /* NAK/ACK* Generated At Conclusion Of Transfer */
-#define GEN 0x0010 /* General Call Adrress Matching Enabled */
+#define GEN 0x0010 /* General Call Address Matching Enabled */
/* TWI_SLAVE_STAT Masks */
#define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive*) */
diff --git a/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
index 09475034c6a1..e3ab78ef9001 100644
--- a/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
+++ b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
@@ -1206,7 +1206,7 @@
#define SADD_LEN 0x0002 /* Slave Address Length */
#define STDVAL 0x0004 /* Slave Transmit Data Valid */
#define NAK 0x0008 /* NAK/ACK* Generated At Conclusion Of Transfer */
-#define GEN 0x0010 /* General Call Adrress Matching Enabled */
+#define GEN 0x0010 /* General Call Address Matching Enabled */
/* TWI_SLAVE_STAT Masks */
#define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive*) */
diff --git a/arch/blackfin/mach-bf537/include/mach/defBF534.h b/arch/blackfin/mach-bf537/include/mach/defBF534.h
index 0323e6bacdae..042064b2b44a 100644
--- a/arch/blackfin/mach-bf537/include/mach/defBF534.h
+++ b/arch/blackfin/mach-bf537/include/mach/defBF534.h
@@ -1523,7 +1523,7 @@
#define SADD_LEN 0x0002 /* Slave Address Length */
#define STDVAL 0x0004 /* Slave Transmit Data Valid */
#define NAK 0x0008 /* NAK/ACK* Generated At Conclusion Of Transfer */
-#define GEN 0x0010 /* General Call Adrress Matching Enabled */
+#define GEN 0x0010 /* General Call Address Matching Enabled */
/* TWI_SLAVE_STAT Masks */
#define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive*) */
diff --git a/arch/blackfin/mach-bf538/include/mach/defBF539.h b/arch/blackfin/mach-bf538/include/mach/defBF539.h
index 7a8ac5f44204..d85d128c97ca 100644
--- a/arch/blackfin/mach-bf538/include/mach/defBF539.h
+++ b/arch/blackfin/mach-bf538/include/mach/defBF539.h
@@ -2185,7 +2185,7 @@
#define SADD_LEN 0x0002 /* Slave Address Length */
#define STDVAL 0x0004 /* Slave Transmit Data Valid */
#define NAK 0x0008 /* NAK/ACK* Generated At Conclusion Of Transfer */
-#define GEN 0x0010 /* General Call Adrress Matching Enabled */
+#define GEN 0x0010 /* General Call Address Matching Enabled */
/* TWIx_SLAVE_STAT Masks */
#define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive*) */
diff --git a/arch/cris/arch-v32/lib/nand_init.S b/arch/cris/arch-v32/lib/nand_init.S
index e705f5cce969..d671fed451c9 100644
--- a/arch/cris/arch-v32/lib/nand_init.S
+++ b/arch/cris/arch-v32/lib/nand_init.S
@@ -139,7 +139,7 @@ copy_nand_to_ram:
lsrq 8, $r4
move.b $r4, [$r1] ; Row address
lsrq 8, $r4
- move.b $r4, [$r1] ; Row adddress
+ move.b $r4, [$r1] ; Row address
moveq 20, $r4
2: bne 2b
subq 1, $r4
diff --git a/arch/cris/include/asm/etraxgpio.h b/arch/cris/include/asm/etraxgpio.h
index d474818a537e..461c089db765 100644
--- a/arch/cris/include/asm/etraxgpio.h
+++ b/arch/cris/include/asm/etraxgpio.h
@@ -1,5 +1,5 @@
/*
- * The following devices are accessable using this driver using
+ * The following devices are accessible using this driver using
* GPIO_MAJOR (120) and a couple of minor numbers.
*
* For ETRAX 100LX (CONFIG_ETRAX_ARCH_V10):
diff --git a/arch/h8300/Kconfig.debug b/arch/h8300/Kconfig.debug
index ee671c3f2c74..e8d1b236ad8c 100644
--- a/arch/h8300/Kconfig.debug
+++ b/arch/h8300/Kconfig.debug
@@ -48,7 +48,7 @@ config DEFAULT_CMDLINE
builtin kernel commandline enabled.
config KERNEL_COMMAND
- string "Buildin commmand string"
+ string "Buildin command string"
depends on DEFAULT_CMDLINE
help
builtin kernel commandline strings.
diff --git a/arch/ia64/kvm/mmio.c b/arch/ia64/kvm/mmio.c
index fb8f9f59a1ed..f1e17d3d6cd9 100644
--- a/arch/ia64/kvm/mmio.c
+++ b/arch/ia64/kvm/mmio.c
@@ -130,7 +130,7 @@ static void mmio_access(struct kvm_vcpu *vcpu, u64 src_pa, u64 *dest,
local_irq_save(psr);
- /*Intercept the acces for PIB range*/
+ /*Intercept the access for PIB range*/
if (iot == GPFN_PIB) {
if (!dir)
lsapic_write(vcpu, src_pa, s, *dest);
diff --git a/arch/mips/alchemy/common/power.c b/arch/mips/alchemy/common/power.c
index e5916a516e58..647e518c90bc 100644
--- a/arch/mips/alchemy/common/power.c
+++ b/arch/mips/alchemy/common/power.c
@@ -130,7 +130,7 @@ static void restore_core_regs(void)
au_writel(sleep_usb[1], USBD_ENABLE);
au_sync();
#else
- /* enable accces to OTG memory */
+ /* enable access to OTG memory */
au_writel(au_readl(USB_MSR_BASE + 4) | (1 << 6), USB_MSR_BASE + 4);
au_sync();
diff --git a/arch/mips/include/asm/mach-powertv/ioremap.h b/arch/mips/include/asm/mach-powertv/ioremap.h
index 076f2eeaa575..c86ef094ec37 100644
--- a/arch/mips/include/asm/mach-powertv/ioremap.h
+++ b/arch/mips/include/asm/mach-powertv/ioremap.h
@@ -88,7 +88,7 @@ static inline dma_addr_t _dma_to_phys_offset_raw(dma_addr_t dma)
}
/* These are not portable and should not be used in drivers. Drivers should
- * be using ioremap() and friends to map physical addreses to virtual
+ * be using ioremap() and friends to map physical addresses to virtual
* addresses and dma_map*() and friends to map virtual addresses into DMA
* addresses and back.
*/
diff --git a/arch/mips/jz4740/board-qi_lb60.c b/arch/mips/jz4740/board-qi_lb60.c
index 5742bb4d78f4..de4433c5a771 100644
--- a/arch/mips/jz4740/board-qi_lb60.c
+++ b/arch/mips/jz4740/board-qi_lb60.c
@@ -65,7 +65,7 @@ static struct nand_ecclayout qi_lb60_ecclayout_1gb = {
/* Early prototypes of the QI LB60 had only 1GB of NAND.
* In order to support these devices aswell the partition and ecc layout is
- * initalized depending on the NAND size */
+ * initialized depending on the NAND size */
static struct mtd_partition qi_lb60_partitions_1gb[] = {
{
.name = "NAND BOOT partition",
@@ -464,7 +464,7 @@ static int __init qi_lb60_board_setup(void)
board_gpio_setup();
if (qi_lb60_init_platform_devices())
- panic("Failed to initalize platform devices\n");
+ panic("Failed to initialize platform devices\n");
return 0;
}
diff --git a/arch/mips/jz4740/gpio.c b/arch/mips/jz4740/gpio.c
index 38f60f35156c..88e6aeda5bf1 100644
--- a/arch/mips/jz4740/gpio.c
+++ b/arch/mips/jz4740/gpio.c
@@ -546,7 +546,7 @@ static int __init jz4740_gpio_init(void)
for (i = 0; i < ARRAY_SIZE(jz4740_gpio_chips); ++i)
jz4740_gpio_chip_init(&jz4740_gpio_chips[i], i);
- printk(KERN_INFO "JZ4740 GPIO initalized\n");
+ printk(KERN_INFO "JZ4740 GPIO initialized\n");
return 0;
}
diff --git a/arch/mips/mti-malta/malta-memory.c b/arch/mips/mti-malta/malta-memory.c
index b27419c84919..a96d281f9221 100644
--- a/arch/mips/mti-malta/malta-memory.c
+++ b/arch/mips/mti-malta/malta-memory.c
@@ -43,7 +43,7 @@ static struct prom_pmemblock mdesc[PROM_MAX_PMEMBLOCKS];
static char *mtypes[3] = {
"Dont use memory",
"YAMON PROM memory",
- "Free memmory",
+ "Free memory",
};
#endif
diff --git a/arch/mips/pci/pcie-octeon.c b/arch/mips/pci/pcie-octeon.c
index 385f035b24e4..0583c463e5f1 100644
--- a/arch/mips/pci/pcie-octeon.c
+++ b/arch/mips/pci/pcie-octeon.c
@@ -900,7 +900,7 @@ static int cvmx_pcie_rc_initialize(int pcie_port)
mem_access_subid.s.ror = 0;
/* Disable Relaxed Ordering for Writes. */
mem_access_subid.s.row = 0;
- /* PCIe Adddress Bits <63:34>. */
+ /* PCIe Address Bits <63:34>. */
mem_access_subid.s.ba = 0;
/*
diff --git a/arch/mips/powertv/memory.c b/arch/mips/powertv/memory.c
index 73880ad29bc2..fb3d29660c42 100644
--- a/arch/mips/powertv/memory.c
+++ b/arch/mips/powertv/memory.c
@@ -57,7 +57,7 @@
unsigned long ptv_memsize;
/*
- * struct low_mem_reserved - Items in low memmory that are reserved
+ * struct low_mem_reserved - Items in low memory that are reserved
* @start: Physical address of item
* @size: Size, in bytes, of this item
* @is_aliased: True if this is RAM aliased from another location. If false,
diff --git a/arch/mips/txx9/generic/pci.c b/arch/mips/txx9/generic/pci.c
index 9a0be810cafa..96e69a00ffc8 100644
--- a/arch/mips/txx9/generic/pci.c
+++ b/arch/mips/txx9/generic/pci.c
@@ -107,7 +107,7 @@ int txx9_pci_mem_high __initdata;
/*
* allocate pci_controller and resources.
- * mem_base, io_base: physical addresss. 0 for auto assignment.
+ * mem_base, io_base: physical address. 0 for auto assignment.
* mem_size and io_size means max size on auto assignment.
* pcic must be &txx9_primary_pcic or NULL.
*/
diff --git a/arch/powerpc/include/asm/8xx_immap.h b/arch/powerpc/include/asm/8xx_immap.h
index 4b0e15206006..6b6dc20b0beb 100644
--- a/arch/powerpc/include/asm/8xx_immap.h
+++ b/arch/powerpc/include/asm/8xx_immap.h
@@ -93,7 +93,7 @@ typedef struct mem_ctlr {
} memctl8xx_t;
/*-----------------------------------------------------------------------
- * BR - Memory Controler: Base Register 16-9
+ * BR - Memory Controller: Base Register 16-9
*/
#define BR_BA_MSK 0xffff8000 /* Base Address Mask */
#define BR_AT_MSK 0x00007000 /* Address Type Mask */
@@ -110,7 +110,7 @@ typedef struct mem_ctlr {
#define BR_V 0x00000001 /* Bank Valid */
/*-----------------------------------------------------------------------
- * OR - Memory Controler: Option Register 16-11
+ * OR - Memory Controller: Option Register 16-11
*/
#define OR_AM_MSK 0xffff8000 /* Address Mask Mask */
#define OR_ATM_MSK 0x00007000 /* Address Type Mask Mask */
diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c
index 7fd90d02d8c6..c4d2b7167568 100644
--- a/arch/powerpc/oprofile/op_model_cell.c
+++ b/arch/powerpc/oprofile/op_model_cell.c
@@ -1469,7 +1469,7 @@ static int cell_global_start(struct op_counter_config *ctr)
* The pm_interval register is setup to write the SPU PC value into the
* trace buffer at the maximum rate possible. The trace buffer is configured
* to store the PCs, wrapping when it is full. The performance counter is
- * intialized to the max hardware count minus the number of events, N, between
+ * initialized to the max hardware count minus the number of events, N, between
* samples. Once the N events have occured, a HW counter overflow occurs
* causing the generation of a HW counter interrupt which also stops the
* writing of the SPU PC values to the trace buffer. Hence the last PC
diff --git a/arch/powerpc/platforms/83xx/suspend-asm.S b/arch/powerpc/platforms/83xx/suspend-asm.S
index 1930543c98d3..3d1ecd211776 100644
--- a/arch/powerpc/platforms/83xx/suspend-asm.S
+++ b/arch/powerpc/platforms/83xx/suspend-asm.S
@@ -231,7 +231,7 @@ _GLOBAL(mpc83xx_enter_deep_sleep)
ori r4, r4, 0x002a
mtspr SPRN_DBAT0L, r4
lis r8, TMP_VIRT_IMMR@h
- ori r4, r8, 0x001e /* 1 MByte accessable from Kernel Space only */
+ ori r4, r8, 0x001e /* 1 MByte accessible from Kernel Space only */
mtspr SPRN_DBAT0U, r4
isync
@@ -241,7 +241,7 @@ _GLOBAL(mpc83xx_enter_deep_sleep)
ori r4, r4, 0x002a
mtspr SPRN_DBAT1L, r4
lis r9, (TMP_VIRT_IMMR + 0x01000000)@h
- ori r4, r9, 0x001e /* 1 MByte accessable from Kernel Space only */
+ ori r4, r9, 0x001e /* 1 MByte accessible from Kernel Space only */
mtspr SPRN_DBAT1U, r4
isync
@@ -253,7 +253,7 @@ _GLOBAL(mpc83xx_enter_deep_sleep)
li r4, 0x0002
mtspr SPRN_DBAT2L, r4
lis r4, KERNELBASE@h
- ori r4, r4, 0x001e /* 1 MByte accessable from Kernel Space only */
+ ori r4, r4, 0x001e /* 1 MByte accessible from Kernel Space only */
mtspr SPRN_DBAT2U, r4
isync
diff --git a/arch/powerpc/platforms/ps3/device-init.c b/arch/powerpc/platforms/ps3/device-init.c
index b341018326df..6c4b5837fc8a 100644
--- a/arch/powerpc/platforms/ps3/device-init.c
+++ b/arch/powerpc/platforms/ps3/device-init.c
@@ -566,10 +566,10 @@ static int ps3_setup_dynamic_device(const struct ps3_repository_device *repo)
case PS3_DEV_TYPE_STOR_DISK:
result = ps3_setup_storage_dev(repo, PS3_MATCH_ID_STOR_DISK);
- /* Some devices are not accessable from the Other OS lpar. */
+ /* Some devices are not accessible from the Other OS lpar. */
if (result == -ENODEV) {
result = 0;
- pr_debug("%s:%u: not accessable\n", __func__,
+ pr_debug("%s:%u: not accessible\n", __func__,
__LINE__);
}
diff --git a/arch/powerpc/platforms/ps3/interrupt.c b/arch/powerpc/platforms/ps3/interrupt.c
index 59d9712d7364..92290ff4761a 100644
--- a/arch/powerpc/platforms/ps3/interrupt.c
+++ b/arch/powerpc/platforms/ps3/interrupt.c
@@ -44,7 +44,7 @@
* @lock:
* @ipi_debug_brk_mask:
*
- * The HV mantains per SMT thread mappings of HV outlet to HV plug on
+ * The HV maintains per SMT thread mappings of HV outlet to HV plug on
* behalf of the guest. These mappings are implemented as 256 bit guest
* supplied bitmaps indexed by plug number. The addresses of the bitmaps
* are registered with the HV through lv1_configure_irq_state_bitmap().
diff --git a/arch/sh/mm/cache-sh5.c b/arch/sh/mm/cache-sh5.c
index eb4cc4ec7952..d1bffbcd9d52 100644
--- a/arch/sh/mm/cache-sh5.c
+++ b/arch/sh/mm/cache-sh5.c
@@ -568,7 +568,7 @@ static void sh5_flush_dcache_page(void *page)
}
/*
- * Flush the range [start,end] of kernel virtual adddress space from
+ * Flush the range [start,end] of kernel virtual address space from
* the I-cache. The corresponding range must be purged from the
* D-cache also because the SH-5 doesn't have cache snooping between
* the caches. The addresses will be visible through the superpage
diff --git a/arch/sparc/kernel/traps_64.c b/arch/sparc/kernel/traps_64.c
index 42ad2ba85010..1e9770936c3b 100644
--- a/arch/sparc/kernel/traps_64.c
+++ b/arch/sparc/kernel/traps_64.c
@@ -622,7 +622,7 @@ static const char CHAFSR_PERR_msg[] =
static const char CHAFSR_IERR_msg[] =
"Internal processor error";
static const char CHAFSR_ISAP_msg[] =
- "System request parity error on incoming addresss";
+ "System request parity error on incoming address";
static const char CHAFSR_UCU_msg[] =
"Uncorrectable E-cache ECC error for ifetch/data";
static const char CHAFSR_UCC_msg[] =
diff --git a/arch/x86/include/asm/pgalloc.h b/arch/x86/include/asm/pgalloc.h
index 271de94c3810..b4389a468fb6 100644
--- a/arch/x86/include/asm/pgalloc.h
+++ b/arch/x86/include/asm/pgalloc.h
@@ -92,7 +92,7 @@ static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
extern void ___pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd);
static inline void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd,
- unsigned long adddress)
+ unsigned long address)
{
___pmd_free_tlb(tlb, pmd);
}
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index cae9c3cb95cf..c3e6d9a3de65 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -902,7 +902,7 @@ extern unsigned long thread_saved_pc(struct task_struct *tsk);
/*
* The below -8 is to reserve 8 bytes on top of the ring0 stack.
* This is necessary to guarantee that the entire "struct pt_regs"
- * is accessable even if the CPU haven't stored the SS/ESP registers
+ * is accessible even if the CPU haven't stored the SS/ESP registers
* on the stack (interrupt gate does not save these registers
* when switching to the same priv ring).
* Therefore beware: accessing the ss/esp fields of the
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index d2fdb0826df2..57ca77787220 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -1086,7 +1086,7 @@ static int alloc_new_range(struct dma_ops_domain *dma_dom,
dma_dom->aperture_size += APERTURE_RANGE_SIZE;
- /* Intialize the exclusion range if necessary */
+ /* Initialize the exclusion range if necessary */
for_each_iommu(iommu) {
if (iommu->exclusion_start &&
iommu->exclusion_start >= dma_dom->aperture[index]->offset
@@ -1353,7 +1353,7 @@ static void dma_ops_domain_free(struct dma_ops_domain *dom)
/*
* Allocates a new protection domain usable for the dma_ops functions.
- * It also intializes the page table and the address allocator data
+ * It also initializes the page table and the address allocator data
* structures required for the dma_ops interface
*/
static struct dma_ops_domain *dma_ops_domain_alloc(void)
diff --git a/arch/x86/kernel/early_printk_mrst.c b/arch/x86/kernel/early_printk_mrst.c
index 65df603622b2..25bfdbb5b130 100644
--- a/arch/x86/kernel/early_printk_mrst.c
+++ b/arch/x86/kernel/early_printk_mrst.c
@@ -103,7 +103,7 @@ struct dw_spi_reg {
static unsigned long mrst_spi_paddr = MRST_REGBASE_SPI0;
static u32 *pclk_spi0;
-/* Always contains an accessable address, start with 0 */
+/* Always contains an accessible address, start with 0 */
static struct dw_spi_reg *pspi;
static struct kmsg_dumper dw_dumper;
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index bcece91dd311..8e09aa3aa6d6 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -124,7 +124,7 @@ ENTRY(startup_32)
movsl
movl pa(boot_params) + NEW_CL_POINTER,%esi
andl %esi,%esi
- jz 1f # No comand line
+ jz 1f # No command line
movl $pa(boot_command_line),%edi
movl $(COMMAND_LINE_SIZE/4),%ecx
rep